Travoprost with sofZia® preservative system lowered intraocular pressure of Japanese normal tension glaucoma with minimal side effects

Directory of Open Access Journals (Sweden)

Mizoue S

2014-02-01

Full Text Available Shiro Mizoue,1 Tadashi Nakano,2 Nobuo Fuse,3 Aiko Iwase,4 Shun Matsumoto,5 Keiji Yoshikawa6 On behalf of the IOP CHANGE Study Group7 1Department of Ophthalmology, Ehime University Graduate School of Medicine, Ehime, Japan; 2Department of Ophthalmology, Jikei University School of Medicine, Tokyo, Japan; 3Department of Integrative Genomics, Tohoku Medical Megabank Organization, Miyagi, Japan; 4Tajimi Iwase Eye Clinic, Gifu, Japan; 5Department of Ophthalmology, Tokyo Teishin Hospital, 6Yoshikawa Eye Clinic, Tokyo, Japan; 7IOP CHecked and Assessed in Normal tension Glaucoma by Exceptional Glaucomatologists Study Group, Japan Background: This study aimed to evaluate the effect of travoprost with sofZia® preservative system for lowering the intraocular pressure (IOP of Japanese normal tension glaucoma (NTG patients. Methods: In this prospective, multicenter, open-label study, Japanese NTG patients with baseline IOPs <20 mmHg were enrolled after three consecutive time measurements taken at screening and baseline visits. Travoprost with sofZia® was instilled once daily. Lowering effect on IOP, conjunctival hyperemia, superficial punctate keratopathy, and adverse events were examined at week 4, 8, and 12 after drug instillation. Results: One-hundred and three of the 107 enrolled patients (baseline IOP =15.2±2.0 mmHg [mean ± standard deviation] completed the study. The mean IOP value as well as percent reduction was significantly reduced at each visit after travoprost with sofZia® initiation (P<0.0001. The conjunctival hyperemia score was 1 or less throughout the study, though it increased significantly over time. No significant change was observed in superficial punctate keratopathy. The cumulative incidence of side effects such as eyelash changes, eyelid pigmentation, and deepening of the upper lid was 47.6%, 27.2%, and 16.5%, respectively. Conclusion: Travoprost preserved with sofZia® effectively lowered the IOP of Japanese NTG patients. It was

Flattening the Learning Curve: SOF as the Supported Command in the Irregular Warfare Environment

Science.gov (United States)

2012-06-01

franchises can get this right, then surely so could the United States military. The endstate should always be to become more effective and efficient...may set the conditions for Joint and integrated GPF/SOF training on a more permanent basis. Of course, the disadvantage is that any training with

Effectiveness of ophthalmic solution preservatives: a comparison of latanoprost with 0.02% benzalkonium chloride and travoprost with the sofZia preservative system

Directory of Open Access Journals (Sweden)

Lovelace Cherie

2011-04-01

Full Text Available Abstract Background Although in vitro and in vivo laboratory studies have suggested that benzalkonium chloride (BAK in topical ophthalmic solutions may be detrimental to corneal epithelial cells, multiple short- and long-term clinical studies have provided evidence supporting the safety of BAK. Despite the conflicting evidence, BAK is the most commonly used preservative in ophthalmic products largely due to its proven antimicrobial efficacy. This study was designed to characterize the antimicrobial performance of two commonly used topical ocular hypotensive agents that employ different preservative systems: latanoprost 0.005% with 0.02% BAK and travoprost 0.004% with sofZia, a proprietary ionic buffer system. Methods Each product was tested for antimicrobial effectiveness by European Pharmacopoeia A (EP-A standards, the most stringent standards of the three major compendia, which specify two early sampling time points (6 and 24 hours not required by the United States Pharmacopeia or Japanese Pharmacopoeia. Aliquots were inoculated with between 105 and 106 colony-forming units of the test organisms: Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Candida albicans and Aspergillus brasiliensis. Sampling and enumeration were conducted at protocol-defined time points through 28 days. Results BAK-containing latanoprost met EP-A criteria by immediately reducing all bacterial challenge organisms to the test sensitivity and fungal challenges within the first six hours while the preservative activity of travoprost with sofZia did not. Complete bacterial reduction by travoprost with sofZia was not shown until seven days into the test, and fungal reduction never exceeded the requisite 2 logs during the 28-day test. Travoprost with sofZia also did not meet EP-B criteria due to its limited effectiveness against Staphylococcus aureus. Both products satisfied United States and Japanese pharmacopoeial criteria. Conclusions Latanoprost with 0

Effectiveness of ophthalmic solution preservatives: a comparison of latanoprost with 0.02% benzalkonium chloride and travoprost with the sofZia preservative system.

Science.gov (United States)

Ryan, Gerard; Fain, Joel M; Lovelace, Cherie; Gelotte, Karl M

2011-04-21

Although in vitro and in vivo laboratory studies have suggested that benzalkonium chloride (BAK) in topical ophthalmic solutions may be detrimental to corneal epithelial cells, multiple short- and long-term clinical studies have provided evidence supporting the safety of BAK. Despite the conflicting evidence, BAK is the most commonly used preservative in ophthalmic products largely due to its proven antimicrobial efficacy. This study was designed to characterize the antimicrobial performance of two commonly used topical ocular hypotensive agents that employ different preservative systems: latanoprost 0.005% with 0.02% BAK and travoprost 0.004% with sofZia, a proprietary ionic buffer system. Each product was tested for antimicrobial effectiveness by European Pharmacopoeia A (EP-A) standards, the most stringent standards of the three major compendia, which specify two early sampling time points (6 and 24 hours) not required by the United States Pharmacopeia or Japanese Pharmacopoeia. Aliquots were inoculated with between 10(5) and 10(6) colony-forming units of the test organisms: Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Candida albicans and Aspergillus brasiliensis. Sampling and enumeration were conducted at protocol-defined time points through 28 days. BAK-containing latanoprost met EP-A criteria by immediately reducing all bacterial challenge organisms to the test sensitivity and fungal challenges within the first six hours while the preservative activity of travoprost with sofZia did not. Complete bacterial reduction by travoprost with sofZia was not shown until seven days into the test, and fungal reduction never exceeded the requisite 2 logs during the 28-day test. Travoprost with sofZia also did not meet EP-B criteria due to its limited effectiveness against Staphylococcus aureus. Both products satisfied United States and Japanese pharmacopoeial criteria. Latanoprost with 0.02% BAK exhibited more effective microbial protection than

Properties of fluorosulfate-based ionic liquids and geometries of (FO2SOH)OSO2F- and (FO2SOH)2O2SOF-.

Science.gov (United States)

Enomoto, Takeshi; Matsumoto, Kazuhiko; Hagiwara, Rika

2011-12-14

A room temperature ionic liquid (IL) based on the fluorosulfate anion (SO(3)F(-)) has been synthesized by the reaction of 1-ethyl-3-methylimidazolium (EMIm(+)) chloride and fluorosulfuric acid (HOSO(2)F). The viscosity, ionic conductivity, and electrochemical window of EMImSO(3)F at 25 °C are 46.6 mPa s, 10.8 mS cm(-1), and 4.3 V, respectively. According to a solvatochromic measurement using ILs, there is a trend in the donor ability of fluoro- and oxofluoroanions, PF(6)(-) OSO(2)F and EMIm(FO(2)SOH)(2)O(2)SOF, respectively. Both the salts are liquid at room temperature without a HOSO(2)F dissociation pressure (OSO(2)F and 5.1 mPa s and 43.2 mS cm(-1) for EMIm(FO(2)SOH)(2)O(2)SOF). The vibrational modes and bonding properties of these anionic species are discussed with the aid of quantum mechanical calculations. The (FO(2)SOH)OSO(2)F(-) anion in EMIm(FO(2)SOH)OSO(2)F does not have an inversion centre, which stands in contrast to the one with an inversion centre (e.g. observed in solid Cs(FO(2)SOH)OSO(2)F). The (FO(2)SOH)(2)O(2)SOF(-) anion in EMIm(FO(2)SOH)(2)O(2)SOF is characterized by vibrational spectroscopy under C(s) symmetry.

Incorporating technical analysis in undergraduate curricula

Directory of Open Access Journals (Sweden)

Michael R. Melton

2017-11-01

Full Text Available Purpose – The purpose of this paper is to introduce instruction of technical analysis on the undergraduate level that can coincide with traditional teachings of fundamental analysis. Design/methodology/approach – Through examples using the latest in security analysis technology, this paper illustrates the importance of technical security analysis. Findings – This research illustrates how technical analysis techniques may be used to make more significant investment decisions. Originality/value – Kirkpatrick and Dahlquist define technical analysis as a security analysis discipline for forecasting future direction of prices through the study of past market data primarily price and volume This form of analysis has stood in direct contrast to the fundamental analysis approach whereby actual facts of the company its industry and sector may be ignored. Understanding this contrast, much of academia has chosen to continue to focus its finance curricula on fundamental analysis techniques. As more universities implement trading rooms to reflect that of industry, they must recognize that any large brokerage trading group or financial institution will typically have both a technical analysis and fundamental analysis team. Thus, the need to incorporate technical analysis into undergraduate finance curricula.

Quantifying emissions of NH3 and NOx from Agricultural Sources and Biomass Burning using SOF

Science.gov (United States)

Kille, N.; Volkamer, R. M.; Dix, B. K.

2017-12-01

Column measurements of trace gas absorption along the direct solar beam present a powerful yet underused approach to quantify emission fluxes from area sources. The University of Colorado Solar Occultation Flux (CU SOF) instrument (Kille et al., 2017, AMT, doi:10.5194/amt-10-373-2017) features a solar tracker that is self-positioning for use from mobile platforms that are in motion (Baidar et al., 2016, AMT, doi: 10.5194/amt-9-963-2016). This enables the use from research aircraft, as well as the deployment under broken cloud conditions, while making efficient use of aircraft time. First airborne SOF measurements have been demonstrated recently, and we discuss applications to study emissions from biomass burning using aircraft, and to study primary emissions of ammonia and nitrogen oxides (= NO + NO2) from area sources such as concentrated animal feeding operations (CAFO). SOF detects gases in the open atmosphere (no inlets), does not require access to the source, and provides results in units that can be directly compared with emission inventories. The method of emission quantification is relatively straightforward. During FRAPPE (Front Range Air Pollution and Photochemistry Experiment) in Colorado in 2014, we measured emission fluxes of NH3, and NOx from CAFO, quantifying the emissions from 61400 of the 535766 cattle in Weld County, CO (11.4% of the cattle population). We find that NH3 emissions from dairy and cattle farms are similar after normalization by the number of cattle, i.e., we find emission factors, EF, of 11.8 ± 2.0 gNH3/h/head for the studied CAFOs; these EFs are at the upper end of reported values. Results are compared to daytime NEI emissions for case study days. Furthermore, biologically active soils are found to be a strong source of NOx. The NOx sources account for 1.2% of the N-flux (i.e., NH3), and can be competitive with other NOx sources in Weld, CO. The added NOx is particularly relevant in remote regions, where O3 formation and oxidative

Review on structured optical field generated from array beams

Science.gov (United States)

Hou, Tianyue; Zhou, Pu; Ma, Yanxing; Zhi, Dong

2018-03-01

Structured optical field (SOF), which includes vortex beams, non-diffraction beams, cylindrical vector beams and so on, has been under intensive investigation theoretically and experimentally in recent years. Generally, current research focus on the extraordinary properties (non-diffraction propagation, helical wavefront, rotation of electrical field, et al), which can be widely applied in micro-particle manipulation, super-resolution imaging, free-space communication and so on. There are mainly two technical routes, that is, inner-cavity and outer-cavity (spatial light modulators, diffractive phase holograms, q-plates). To date, most of the SOFs generated from both technical routes involves with single monolithic beam. As a novel technical route, SOF based on array beams has the advantage in more flexible freedom degree and power scaling potential. In this paper, research achievements in SOF generation based on array beams are arranged and discussed in detail. Moreover, experiment of generating exotic beam by array beams is introduced, which illustrates that SOF generated from array beams is theoretically valid and experimentally feasible. SOF generated from array beams is also beneficial for capacity increasing and data receiving for free-space optical communication systems at long distance.

Torres de vidrio del centro de arte "Reina Sofía" de Madrid

Directory of Open Access Journals (Sweden)

Íñiguez de Onzoño, José Luis

1992-02-01

Full Text Available The elevator towers in the Art Center "Reina Sofía" stand out in their urban setting due to their transparent partition against the opaque façade of the old "Hospital Provincial de Atocha". The material and functional characteristics of their partition are the topic of this article: - The bracing and fixation system against gravitation and thermic forces through vertical steel ties, special joints and springs in the bases. - The bracing and fixation system against horizontal actions on the corners of each piece. - The function of structural silicone as the only material between panels helping in the redistribution of stress.

Las torres de ascensores del Centro de Arte "Reina Sofía", destacan en su entorno urbano debido a su importante cerramiento transparente, frente a la opaca fachada del antiguo Hospital Provincial de Atocha. Las características materiales y de funcionamiento de su cerramiento es lo que aquí se expone: — El sistema de anclaje y fijación ante las acciones gravitatorias y térmicas a través de tirantes verticales de acero, rótulas especiales, y muelles en sus bases. — El sistema de anclaje y fijación ante acciones horizontales en las esquinas de cada pieza. — La función de la silicona estructural, como único material de enlace entre paneles para colaborar en la redistribución de esfuerzos.

Filosofía para damas hoy: el mundo de Sofía

Directory of Open Access Journals (Sweden)

Mataix Loma, Carmen

2005-12-01

Full Text Available The author compares one of the philosophical best sellers, Sophia's World, with traditional «literature for Ladies», a very famous genre in the Enlightenment The book supports masculine-feminine duality as well as adult-child and reality- appearance dualities.

La autora compara uno de los libros de divulgación filosófica de más éxito, El mundo de Sofía, con la tradicional «literatura para damas» desarrollada como género en la Ilustración. El libro mantiene la dualidad masculino-femenino, a la vez que la de adulto- niño y la tradicional filosófica, apariencia-realidad.

FOREX trading strategy formation using technical analysis

OpenAIRE

Klimavičius, Domas

2010-01-01

FOREX technical analysis indicators, their characteristics and capabilities are researched in this final master thesis. The main goal of this thesis is to determine if technical analysis indicators can recognise patterns in price movements and if they can predict future price movement. The first part of the thesis presents with FOREX theoretical aspects, its characteristics and participants. In the second part of the thesis FOREX analysis tools are overviewed, focusing on technical analysis. ...

Software Engineering and eLearning: The MuSofT Project - www.musoft.org

Directory of Open Access Journals (Sweden)

Ernst-Erich Doberkat

2005-12-01

Full Text Available eLearning supports the education in certain disciplines. Here, we report about novel eLearning concepts, techniques, and tools to support education in Software Engineering, a subdiscipline of computer science. We call this "Software Engineering eLearning". On the other side, software support is a substantial prerequisite for eLearning in any discipline. Thus, Software Engineering techniques have to be applied to develop and maintain those software systems. We call this "eLearning Software Engineering". Both aspects have been investigated in a large joint, BMBF-funded research project, termed MuSofT (Multimedia in Software Engineering. The main results are summarized in this paper.

Job and task analysis for technical staff

International Nuclear Information System (INIS)

Toline, B.C.

1991-01-01

In September of 1989 Cooper Nuclear Station began a project to upgrade the Technical Staff Training Program. This project's roots began by performing job and Task Analysis for Technical Staff. While the industry has long been committed to Job and Task Analysis to target performance based instruction for single job positions, this approach was unique in that it was not originally considered appropriate for a group as diverse as Tech Staff. Much to his satisfaction the Job and Task Analysis Project was much less complicated for Technical Staff than the author had imagined. The benefits of performing the Job and Task Analysis for Technical Staff have become increasingly obvious as he pursues lesson plan development and course revisions. The outline for this presentation will be as follows: philosophy adopted; preparation of the job survey document; performing the job analysis; performing task analysis for technical staff and associated pitfalls; clustering objectives for training and comparison to existing program; benefits now and in the future; final phase (comparison to INPO guides and meeting the needs of non-degreed engineering professionals); and conclusion. By focusing on performance based needs for engineers rather than traditional academics for training the author is confident the future Technical Staff Program will meet the challenges ahead and will exceed requirements for accreditation

Explosive and pollutant TNP detection by structurally flexible SOFs: DFT-D3, TD-DFT study and in vitro recognition

Energy Technology Data Exchange (ETDEWEB)

Ghosh, Pritam [Surface Engineering & Tribology Group, CSIR-Central Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Burdwan, Durgapur 713209, West Bengal (India); Chemistry Department, Jadavpur University, Kolkata 32, West Bengal (India); Roy, Partha [Chemistry Department, Jadavpur University, Kolkata 32, West Bengal (India); Ghosh, Ananta [Chemistry Department, Burdwan Raj College, The University of Burdwan, West Bengal (India); Jana, Saibal [Department of Chemistry, Indian Institute of Technology Kharagpur, Kharagpur 721 302 (India); Murmu, Naresh Chandra [Surface Engineering & Tribology Group, CSIR-Central Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Burdwan, Durgapur 713209, West Bengal (India); Mukhopadhyay, Subhra Kanti [Department of Microbiology, The University of Burdwan, Burdwan 713104 (India); Banerjee, Priyabrata, E-mail: pr_banerjee@cmeri.res.in [Surface Engineering & Tribology Group, CSIR-Central Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Burdwan, Durgapur 713209, West Bengal (India); Academy of Scientific and Innovative Research at CSIR-Central Mechanical Engineering Research Institute (CMERI), Mahatma Gandhi Avenue, Durgapur 713209, West Bengal (India)

2017-05-15

Explosive and Pollutant Nitro Aromatics (epNACs) like 2,4,6-trinitrophenol (TNP) has been detected from various surface water specimens by luminescent Schiff base Organic Frameworks (SOFs) by fluorometric method. Fluorescence intensity of the receptor SOFs have been quenched in presence of TNP due to RET and ICT, which has been confirmed through solid and solution level spectroscopic studies like FT-IR, {sup 1}H-NMR, fluorescence titration. Modern DFT (DFT-D3) calculations of the possible host guest conformers have been performed for exploration of plausible route of interaction between receptor and epNACs. The outcome of theoretical calculations is in line with experimental findings where TNP and receptor conformation mimic parallel displaced type π- π interaction. TD-DFT has been executed with both receptor and receptor ···TNP adduct, the fluorescence quenching is in line with experimental outcome. Limit of TNP detection has been found as low as 5 μM with 2.97×10{sup 4} M{sup -1} as binding constant. In real time stepping, TNP as mutagenic agent for aquatic life has been detected inside prokaryotic cells like candidia albicans in ppm level.

Amino Acid Conjugated Anthraquinones from the Marine-Derived Fungus Penicillium sp. SCSIO sof101.

Science.gov (United States)

Luo, Minghe; Cui, Zhaomeng; Huang, Hongbo; Song, Xianqin; Sun, Aijun; Dang, Yongjun; Lu, Laichun; Ju, Jianhua

2017-05-26

Emodacidamides A-H (1-8), natural products featuring anthraquinone-amino acid conjugates, have been isolated from a marine-derived fungus, Penicillium sp. SCSIO sof101, together with known anthraquinones 9 and 10. The planar structures of 1-8 were elucidated using a combination of NMR spectroscopy and mass spectrometry. The absolute configurations of the amino acid residues were confirmed using Marfey's method and chiral-phase HPLC analyses. Additionally, isolates were evaluated for possible immunomodulatory and cytotoxic activities. Emodacidamides A (1), C (3), D (4), and E (5) inhibited interleukin-2 secretion from Jurkat cells with IC 50 values of 4.1, 5.1, 12, and 5.4 μM, respectively.

Effects of SofZia-preserved travoprost and benzalkonium chloride-preserved latanoprost on the ocular surface -- a multicentre randomized single-masked study.

Science.gov (United States)

Aihara, Makoto; Oshima, Hiromi; Araie, Makoto

2013-02-01

To assess the effect of SofZia-preserved travoprost on ocular surface conditions in comparison with benzalkonium chloride (BAK)-preserved latanoprost. A prospective randomized multicentre single-masked comparative study. Patients with open-angle glaucoma or ocular hypertension who had been treated with BAK-preserved latanoprost 0.005% (Xalatan(®) ) monotherapy for at least 3 months. Patients were enrolled at 23 facilities. Patients were randomly divided into the X-X group, continuous use of Xalatan(®) , or the X-T group, switching from Xalatan(®) to SofZia-preserved travoprost 0.004% (TravatanZ(®) ), and followed for 3 months. The superficial punctate keratopathy (SPK), conjunctival epitheliopathy, hyperaemia, tear break-up time (TBUT) and intraocular pressure (IOP) were examined for each patient in a masked manner. Changes in the frequency of keratoconjunctival epitheliopathy were evaluated 3 months after study initiation. Intra- and intergroup comparisons of changes in SPK, conjunctival epitheliopathy, hyperaemia, TBUT and IOP were also carried out. Two hundred twenty patients participated and 215 completed the 3-month study. The frequency of keratoconjunctival epitheliopathy significantly decreased in the X-T group (p = 0.036) and the intergroup difference was also significant (p = 0.001). SPK scores and TBUT were significantly improved in the X-T group (p = 0.034, 0.049), also with significant intergroup differences in the cornea excluding the inferior area and TBUT. There were no significant intergroup differences in changes of the hyperaemia scores and the IOP reduction. Switching to SofZia-preserved travoprost after BAK-preserved latanoprost resulted in a lower incidence of keratoconjunctival epitheliopathy, especially in the cornea, with no clinically relevant changes in hyperaemia and IOP. © 2012 The Authors. Acta Ophthalmologica © 2012 Acta Ophthalmologica Scandinavica Foundation.

Teaching audience analysis to the technical student

Science.gov (United States)

Debs, M. B.; Brillhart, L. V.

1981-01-01

Teaching audience analysis, as practiced in a technical writing course for engineering students, is discussed. Audience analysis is described as the task of defining the audience for a particular piece of writing and determining those characteristics of the audience which constrain the writer and effect reception of the message. A mature technical writing style that shows the tension produced when a text is written to be read and understood is considered in terms of audience analysis. Techniques include: (1) conveying to students the concept that a reader with certain expectations exist, (2) team teaching to preserve the context of a given technical discipline, and (3) assigning a technical report that addresses a variety of readers, thus establishing the complexity of audience oriented writing.

A Technical Analysis Information Fusion Approach for Stock Price Analysis and Modeling

Science.gov (United States)

Lahmiri, Salim

In this paper, we address the problem of technical analysis information fusion in improving stock market index-level prediction. We present an approach for analyzing stock market price behavior based on different categories of technical analysis metrics and a multiple predictive system. Each category of technical analysis measures is used to characterize stock market price movements. The presented predictive system is based on an ensemble of neural networks (NN) coupled with particle swarm intelligence for parameter optimization where each single neural network is trained with a specific category of technical analysis measures. The experimental evaluation on three international stock market indices and three individual stocks show that the presented ensemble-based technical indicators fusion system significantly improves forecasting accuracy in comparison with single NN. Also, it outperforms the classical neural network trained with index-level lagged values and NN trained with stationary wavelet transform details and approximation coefficients. As a result, technical information fusion in NN ensemble architecture helps improving prediction accuracy.

Technical analysis as a tool of market timing

International Nuclear Information System (INIS)

Rafferty, J.

2002-01-01

Risk management teams carry a high burden because businesses have to compete on a global scale. Timing is everything, once a decision to hedge in the futures has been made. How to determine when it is a good time to buy or sell, and be certain that this information has not already been factored into the price is tricky. There are two schools: fundamental analysis and technical analysis. Statistics and supply and demand data are examined to determine why in fundamental analysis, while technical analysis determines when by interpreting charts. With the help of charts that were displayed, the author examined the price of crude oil in 1990 and 1991 in an attempt to demonstrate technical analysis. Technical analysis is based on mathematics, but it is more art than science. It looks at market patterns that repeat themselves endlessly. Markets almost always enter into a period of consolidation or distribution when they break out. Additional charts displaying the price of crude oil for various periods from 1986 to 1991 were presented and analysed. The author concluded by stating that technical analysis provides visual guidelines to hedgers and traders to assist them in making intelligent forecasts about price and risk. figs

Noble metal (Pt or Au)-doped monolayer MoS2 as a promising adsorbent and gas-sensing material to SO2, SOF2 and SO2F2: a DFT study

Science.gov (United States)

Chen, Dachang; Zhang, Xiaoxing; Tang, Ju; Cui, Hao; Li, Yi

2018-02-01

We explored the adsorption of SO2, SOF2, and SO2F2 on Pt- or Au-doped MoS2 monolayer based on density functional theory. The adsorption energy, adsorption distance, charge transfer as well as density of states were discussed. SO2 and SOF2 exhibit strong chemical interactions with Pt-doped MoS2 based on large adsorption energy, charge transfer, and changes of electron orbitals in gas molecule. SO2 also shows obvious chemisorption on Au-doped MoS2 with apparent magnetism transfer from Au to gas molecules. The adsorption of SO2F2 on Pt-MoS2 and SOF2 on Au-MoS2 exhibits weaker chemical interactions and SO2F2 losses electrons when adsorbed on Pt-MoS2 which is different from other gas adsorption. The adsorption of SO2F2 on Au-MoS2 represents no obvious chemical interaction but physisorption. The gas-sensing properties are also evaluated based on DFT results. This work could provide prospects and application value for typical noble metal-doped MoS2 as gas-sensing materials.

Comparison of visual function and patient satisfaction with AcrySof ReSTORSN6AD1 multifocal intraocular compared to monofocal intraocular lenses 5

Directory of Open Access Journals (Sweden)

Aisa S Alchinova

2016-12-01

Full Text Available Aim. To compare visual function and satisfaction in patients after implantation of AcrySof ReSTOR SN6AD1 multifocal intraocular lens (IOL, AcrySof SA60AТ spherical monofocal IOL, or Akreos АО aspheric monofocal IOL during cataract surgery. Materials. Overall, 34 patients received SN6AD1 multifocal (group 1, 48 eyes, 19 patients received Akreos АО monofocal aspheric (group 2, 30 eyes, and 13 patients received AcrySof SA60AТ monofocal spherical (group 3, 18 eyes IOL. Patients with multifocal IOL were closely matched for age, sex, and ocular findings with patients who had monofocal IOL implantation. Six months postoperatively, uncorrected/corrected distance visual acuity (UDVA/CDVA, uncorrected intermediate (60 cm and near (35 cm visual acuity (UNVA, defocus curve, contrast sensitivity, and a quality-of-life questionnaire were evaluated. Furthermore, independence from glasses and presence of optical phenomena were assessed. Results. Patients in group 2 had statistically significant increase in UDVA than that in group 1 (p = 0.037. There was no significant difference in the mean uncorrected intermediate and best corrected distance visual acuities between the groups. UNVA was better in group 1 than that in groups 2 and 3 (p < 0.0001. Photopic contrast sensitivity for high spatial frequencies was better in groups 2 and 3. Glare was reported in 5.9% of patients in group 1. Halos occurred in 32.4% of patients in group 1. No one reported undesirable visual symptoms in groups 2 and 3. Conclusion. Multifocal IOLs provided higher spectacle independence and satisfactory functional vision over a broad range of distances but were associated with increased subjective visual symptoms and reduced photopic contrast sensitivity for high spatial frequencies and distance visual quality compared with monofocal IOLs.

Forex markets: technical analysis and algorithmic trading

OpenAIRE

Klepić, Igor

2013-01-01

Technical analysis is an efficient way for analysing financial markets such as forex where currencies are being traded. Forex market is the biggest market among all of them which is closed only during weekends. Analysis uses past behaviour of the market and with different mathematical methods tries to predict the future movement of the market. With the help of technical analysis forex market allows individuals as well as large financial corporations to efficiently manage their wealth while th...

COMPARATIVE ANALYSIS BETWEEN THE FUNDAMENTAL AND TECHNICAL ANALYSIS OF STOCKS

Directory of Open Access Journals (Sweden)

Nada Petrusheva

2016-04-01

Full Text Available In the world of investing and trading, in order to have a definite advantage and constantly create profit, you need to have a strategic approach. Generally speaking, the two main schools of thought and strategies in financial markets are fundamental and technical analysis. Fundamental and technical analysis differ in several aspects, such as the way of functioning and execution, the time horizon used, the tools used and their objective. These differences lead to certain advantages and disadvantages of each of the analyses. Fundamental and technical analysis are also a subject of critical reviews by the academic and scientific community and many of these reviews concern the methods of their application, i.e. the possibility of combining the two analyses and using them complementarily to fully utilize their strengths and advantages.

Management of moderate and severe corneal astigmatism with AcrySof® toric intraocular lens implantation - Our experience.

Science.gov (United States)

Farooqui, Javed Hussain; Koul, Archana; Dutta, Ranjan; Shroff, Noshir Minoo

2015-01-01

Visual performance following toric intraocular lens implantation for cataract with moderate and severe astigmatism. Cataract services, Shroff Eye Centre, New Delhi, India. Case series. This prospective study included 64 eyes of 40 patients with more than 1.50 dioptre (D) of pre-existing corneal astigmatism undergoing phacoemulsification with implantation of the AcrySof® toric IntraOcular Lens (IOL). The unaided visual acuity (UCVA), best corrected visual acuity (BCVA), residual refractive sphere and refractive cylinders were evaluated. Toric IOL axis and alignment error was measured by slit lamp method and Adobe Photoshop (version 7) method. Patient satisfaction was evaluated using a satisfaction questionnaire at 3 months. The mean residual refractive astigmatism was 0.57 D at the final follow-up of 3 months. Mean alignment error was 3.44 degrees (SD = 2.60) by slit lamp method and 3.88 degrees (SD = 2.86) by Photoshop method. Forty-six (71.9%) eyes showed misalignment of 5 degrees or less, and 60 (93.8%) eyes showed misalignment of 10 degrees or less. The mean log MAR UCVA at 1st post-op day was 0.172 (SD = 0.02), on 7th post-op day was 0.138 (SD = 0.11), and on 30th post-op day was 0.081 (SD = 0.11). The mean log MAR BCVA at three months was -0.04 (SD = 0.76). We believe that implantation of AcrySof® toric IOL is an effective, safe and predictable method to correct high amounts of corneal astigmatism during cataract surgery.

Economic Analysis of Factors Affecting Technical Efficiency of ...

African Journals Online (AJOL)

Economic Analysis of Factors Affecting Technical Efficiency of Smallholders ... socio-economic characteristics which influence technical efficiency in maize production. ... Ministry of Agriculture and livestock, records, books, reports and internet.

Polar source analysis : technical memorandum

Science.gov (United States)

2017-09-29

The following technical memorandum describes the development, testing and analysis of various polar source data sets. The memorandum also includes recommendation for potential inclusion in future releases of AEDT. This memorandum is the final deliver...

Cost-utility analysis of ledipasvir/sofosbuvir for the treatment of genotype 1 chronic hepatitis C in Japan.

Science.gov (United States)

Igarashi, Ataru; Tang, Wentao; Guerra, Ines; Marié, Lucile; Cure, Sandrine; Lopresti, Michael

2017-01-01

Hepatitis C is the result of a ribonucleic acid (RNA) virus (hepatitis C virus; HCV). The Japan Society of Hepatology (JSH) estimated that 1.5-2 million people in Japan carry HCV. Six major HCV genotypes (GT) and a large number of subtypes have been described in the literature. In Japan, around 70% to 80% of people are infected with HCV genotype 1b. The progress of the disease primarily affects the liver and may lead to liver cirrhosis, hepatocellular carcinoma (HCC) and death. Sofosbuvir (SOF) is a nucleotide analogue NS5B inhibitor and ledipasvir (LDV) is an inhibitor of the HCV NS5A protein. They are combined in a single tablet regimen for the treatment of GT1 patients and resulted in sustained virological response (SVR) above 94% in large phase III trials. This analysis assesses the cost-utility of LDV/SOF in GT1 patients in Japan. A cohort of 10,000 patients was followed through a Markov model until they reached 100 years of age. GT1 treatment-naïve and experienced, non-cirrhotic and cirrhotic patients were studied separately. LDV/SOF was compared to several treatment regimens containing pegylated interferon (PEGIFN), telaprevir (TVR), simeprevir (SMV), daclatasvir (DCV), asunaprevir (ASV) and ribavirin (RBV). Discount rates of 2% were applied to costs and outcomes according to the Japanese guidelines. LDV/SOF was cost-effective against most comparators with incremental cost-effectiveness ratios (ICERs) below JPY 5,000,000. By applying a societal perspective, LDV/SOF was the dominant treatment strategy in all cases. Moreover, LDV/SOF reduced the number of cases of advanced liver disease. These results were robust to sensitivity analyses. LDV/SOF was cost-effective compared to most of the currently recommended treatments. Furthermore, LDV/SOF extends treatments to HCV-infected patients who are ineligible for interferon and RBV-based regimens. LDV/SOF thus has the potential to help reduce the burden of HCV in Japan.

ITER technical meeting on nuclear analysis

International Nuclear Information System (INIS)

Khripunov, V.

2000-01-01

The ITER technical meeting on nuclear analysis was organized on 24-25 February 2000 at the ITER Joint Work Site in Garching. It was clear from the meeting that continuous nuclear analysis is a fundamental part of the design process

Formal modelling and analysis of socio-technical systems

DEFF Research Database (Denmark)

Probst, Christian W.; Kammüller, Florian; Hansen, Rene Rydhof

2016-01-01

systems are still mostly identified through brainstorming of experts. In this work we discuss several approaches to formalising socio-technical systems and their analysis. Starting from a flow logic-based analysis of the insider threat, we discuss how to include the socio aspects explicitly, and show......Attacks on systems and organisations increasingly exploit human actors, for example through social engineering. This non-technical aspect of attacks complicates their formal treatment and automatic identification. Formalisation of human behaviour is difficult at best, and attacks on socio-technical...... a formalisation that proves properties of this formalisation. On the formal side, our work closes the gap between formal and informal approaches to socio-technical systems. On the informal side, we show how to steal a birthday cake from a bakery by social engineering....

Computer-aided System of Semantic Text Analysis of a Technical Specification

OpenAIRE

Zaboleeva-Zotova, Alla; Orlova, Yulia

2008-01-01

The given work is devoted to development of the computer-aided system of semantic text analysis of a technical specification. The purpose of this work is to increase efficiency of software engineering based on automation of semantic text analysis of a technical specification. In work it is offered and investigated the model of the analysis of the text of the technical project is submitted, the attribute grammar of a technical specification, intended for formalization of limited Ru...

DIY Solar Market Analysis Webinar Series: Solar Resource and Technical

Science.gov (United States)

Series: Solar Resource and Technical Potential DIY Solar Market Analysis Webinar Series: Solar Resource and Technical Potential Wednesday, June 11, 2014 As part of a Do-It-Yourself Solar Market Analysis Potential | State, Local, and Tribal Governments | NREL DIY Solar Market Analysis Webinar

Management of moderate and severe corneal astigmatism with AcrySof® toric intraocular lens implantation – Our experience

Science.gov (United States)

Farooqui, Javed Hussain; Koul, Archana; Dutta, Ranjan; Shroff, Noshir Minoo

2015-01-01

Purpose Visual performance following toric intraocular lens implantation for cataract with moderate and severe astigmatism. Setting Cataract services, Shroff Eye Centre, New Delhi, India. Design Case series. Method This prospective study included 64 eyes of 40 patients with more than 1.50 dioptre (D) of pre-existing corneal astigmatism undergoing phacoemulsification with implantation of the AcrySof® toric IntraOcular Lens (IOL). The unaided visual acuity (UCVA), best corrected visual acuity (BCVA), residual refractive sphere and refractive cylinders were evaluated. Toric IOL axis and alignment error was measured by slit lamp method and Adobe Photoshop (version 7) method. Patient satisfaction was evaluated using a satisfaction questionnaire at 3 months. Results The mean residual refractive astigmatism was 0.57 D at the final follow-up of 3 months. Mean alignment error was 3.44 degrees (SD = 2.60) by slit lamp method and 3.88 degrees (SD = 2.86) by Photoshop method. Forty-six (71.9%) eyes showed misalignment of 5 degrees or less, and 60 (93.8%) eyes showed misalignment of 10 degrees or less. The mean log MAR UCVA at 1st post-op day was 0.172 (SD = 0.02), on 7th post-op day was 0.138 (SD = 0.11), and on 30th post-op day was 0.081 (SD = 0.11). The mean log MAR BCVA at three months was −0.04 (SD = 0.76). Conclusion We believe that implantation of AcrySof® toric IOL is an effective, safe and predictable method to correct high amounts of corneal astigmatism during cataract surgery. PMID:26586976

Multidirectional analysis of technical efficiency for pig production systems

DEFF Research Database (Denmark)

Labajavo, Katarina; Hansson, Helena; Asmild, Mette

2016-01-01

Declining profitability and ongoing structural changes in the pig sector require thorough efficiency analysis of individual production factors. In this study we calculated technical efficiency indices for each input and output using multidirectional efficiency analysis and examined the relationship...... between ‘farm-specific characteristics’ and input and output technical efficiencies by production type (piglet, growing-finishing, finish-to-farrow). The results indicated that advisory services and farm location were not significantly correlated with technical efficiency. Similar results were obtained...... for ‘housing practices’, with the exception of the latest technology such as heated floors in relation to input labour technical efficiency for growing-finishing and finish-to-farrow productions. Use of written instructions for feeding for growing-finishing and finish-to-farrow production and written...

Methylation analysis of polysaccharides: Technical advice.

Science.gov (United States)

Sims, Ian M; Carnachan, Susan M; Bell, Tracey J; Hinkley, Simon F R

2018-05-15

Glycosyl linkage (methylation) analysis is used widely for the structural determination of oligo- and poly-saccharides. The procedure involves derivatisation of the individual component sugars of a polysaccharide to partially methylated alditol acetates which are analysed and quantified by gas chromatography-mass spectrometry. The linkage positions for each component sugar can be determined by correctly identifying the partially methylated alditol acetates. Although the methods are well established, there are many technical aspects to this procedure and both careful attention to detail and considerable experience are required to achieve a successful methylation analysis and to correctly interpret the data generated. The aim of this article is to provide the technical details and critical procedural steps necessary for a successful methylation analysis and to assist researchers (a) with interpreting data correctly and (b) in providing the comprehensive data required for reviewers to fully assess the work. Copyright © 2018 Elsevier Ltd. All rights reserved.

Three-year incidence of Nd:YAG capsulotomy and posterior capsule opacification and its relationship to monofocal acrylic IOL biomaterial: a UK Real World Evidence study.

Science.gov (United States)

Ursell, Paul G; Dhariwal, Mukesh; Majirska, Katarina; Ender, Frank; Kalson-Ray, Shoshannah; Venerus, Alessandra; Miglio, Cristiana; Bouchet, Christine

2018-06-11

To evaluate 3-year incidence of Nd:YAG capsulotomy and PCO and compare the effect of different IOL materials. Data were retrospectively collected from seven UK ophthalmology clinics using Medisoft electronic medical records. Eyes from patients ≥65 years undergoing cataract surgery with implantation of acrylic monofocal IOLs during 2010-2013 and 3-year follow-up were analysed. Nd:YAG capsulotomy and PCO incidence proportions were reported for 3 IOL cohorts: AcrySof, other hydrophobic and hydrophilic acrylic IOLs. Unadjusted/adjusted odds ratios (OR) of Nd:YAG capsulotomy were calculated through logistic regression for non-AcrySof cohorts versus AcrySof. A sub-group analysis in single-piece IOLs (>90% of sample eyes) was also performed. The AcrySof cohort included 13,329 eyes, non-AcrySof hydrophobic 19,025 and non-AcrySof hydrophilic 19,808. The 3-year Nd:YAG capsulotomy incidence (95% CI) for AcrySof (2.4%, 2.2-2.7%) was approximately two times lower than non-AcrySof hydrophobic IOLs (4.4%, 4.1-4.7%) and approximately fourfold lower than non-AcrySof hydrophilic IOLs (10.9%, 10.5-11.3%). Trends were similar in PCO incidence (AcrySof: 4.7%; non-AcrySof hydrophobic: 6.3%; non-AcrySof hydrophilic: 14.8%). Also in the analysis restricted to single-piece IOLs, the pattern remained (2.4% vs 5.1% vs. 10.9%, respectively). Adjusted regression analysis showed a approximately two and fivefold increased odds of Nd:YAG for non-AcrySof hydrophobic and hydrophilic acrylic IOLs respectively vs. AcrySof IOLs. Nd:YAG capsulotomy ORs were similar and remained statistically significant in the single-piece IOL sub-group. Real-world evidence shows that within 3 years following implantation, AcrySof IOLs are significantly superior in reducing Nd:YAG capsulotomy and PCO incidence compared to other hydrophilic and hydrophobic acrylic IOLs.

[Cost-effectiveness analysis of sofosbuvir, peginterferon and ribavirin in patients with chronic hepatitis C: Early treatment in the initial stage of fibrosis vs. delayed treatment in advanced fibrosis].

Science.gov (United States)

Buti, María; Domínguez-Hernández, Raquel; Oyagüez, Itziar; Casado, Miguel Ángel

2016-01-01

Cost-effectiveness analysis of sofosbuvir combined with peginterferon alpha-2a and ribavirin (SOF/Peg-IFN/RBV) in early versus advanced fibrosis in previously untreated patients with chronic hepatitis C genotype 1 (CHC-GT1), from the perspective of the Spanish National Health System (NHS). A Markov model was developed to compare lifetime costs and outcomes (life years gained [LYGs] and quality-adjusted life years [QALYs]) of 2 treatment strategies: SOF/Peg-IFN/RBV administered during early fibrosis (mild-moderate fibrosis; F2-F3) or advanced fibrosis (cirrhosis; F4). Efficacy (sustained virologic response), annual transition probabilities, disease management costs and utilities were obtained from the literature. Costs and outcomes were discounted annually at 3%. Direct costs were considered, expressed in Euros (€, 2014). Probabilistic sensitivity analysis (PSA) was also performed. SOF/Peg-IFN/RBV therapy at F2-F3 was more effective (19.12 LYGs and 14.14 QALYs) compared to F4. In a cohort of 1,000 patients, SOF/Peg-IFN/RBV prevented 66 cases of decompensated cirrhosis, 60 hepatocellular carcinomas and 4 liver transplantations compared with therapy in advanced fibrosis. The total lifetime cost of early therapy (€43,263) was less than the cost of treatment in the advanced stage (€49,018). Early therapy was a dominant strategy, more effective and less costly in all simulations. In the PSA analysis, administration of SOF/PEG-IFN/RBV at F2-F3 was dominant in all simulations. Starting SOF/Peg-IFN/RBV therapy at F2-F3, compared with therapy at F4, reduced the incidence of liver disease complications and was associated with cost savings for the Spanish NHS in CHC-GT1 patients. Copyright © 2016 Elsevier España, S.L.U. y AEEH y AEG. All rights reserved.

TECHNICAL EFFICIENCY AND TECHNICAL LEVEL INDICATORS APPLICATION FOR CIVIL AIRCRAFT FUNCTIONAL PROPERTIES ANALYSIS

Directory of Open Access Journals (Sweden)

Vadim V. Efimov

2018-01-01

Full Text Available Functional properties characterize the purpose of the aircraft and are described by its flight performance characteristics such as range and cruising speed, payload, runway characteristics, etc. Functional properties also characterize the aircraft efficiency that determines the objective need for their analysis by both aircraft designers and operators in conditions of permanent and systematic efficiency increase necessity. When choosing the aircraft, it is important for the operator to make sure that a selected aircraft type has a high level of functional properties, which will allow it to provide high operational efficiency without obsolescence in the long term. However, when choosing from several aircraft types the operator has to face the fact that some characteristics of considered aircraft variants are better and the others are worse that does not allow to definitely determine what aircraft type has a higher level of functional properties.The possibility of applying technical efficiency indicators and a generalized technical level indicator for analyzing the functional properties of civil aviation aircraft is explored in this article. Fuel, weight and target efficiency values as well as the previously improved technical level indicator value were calculated for the different generations and modifications of Boeing 737 and Airbus A320 families of medium-range airplanes, which was followed by the results interpretation within one airplane generation and when moving historically from one airplane generation to another. According to analysis results it is concluded that it is impossible to define the change of the aircraft functional properties level by the change in the values of separate technical efficiency indicators. Thus, it is proposed to use a generalized technical level indicator that determines the level of aircraft technical perfection for purpose and to use efficiency indicators to analyze the cost of providing this level of

Methodology for risk-based analysis of technical specifications

International Nuclear Information System (INIS)

Vesely, W.E.; Gaertner, J.P.; Wagner, D.P.

1985-01-01

Part of the effort by EPRI to apply probabilistic risk assessment methods and results to the solution of utility problems involves the investigation of methods for risk-based analysis of technical specifications. The culmination of this investigation is the SOCRATES computer code developed by Battelle's Columbus Laboratories to assist in the evaluation of technical specifications of nuclear power plants. The program is designed to use information found in PRAs to re-evaluate risk for changes in component allowed outage times (AOTs) and surveillance test intervals (STIs). The SOCRATES program is a unique and important tool for technical specification evaluations. The detailed component unavailability model allows a detailed analysis of AOT and STI contributions to risk. Explicit equations allow fast and inexpensive calculations. Because the code is designed to accept ranges of parameters and to save results of calculations that do not change during the analysis, sensitivity studies are efficiently performed and results are clearly displayed

78 FR 27235 - Technical Guidance for Assessing Environmental Justice in Regulatory Analysis

Science.gov (United States)

2013-05-09

... Justice in Regulatory Analysis.'' The purpose of this guidance is to provide EPA analysts with technical...-566-2363. Mail: Technical Guidance for Assessing Environmental Justice in Regulatory Analysis... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OA-2013-0320; FRL-9810-5] Technical Guidance for Assessing...

Persistent profitability of technical analysis on foreign exchange markets?

OpenAIRE

L. MENKHOFF; M. SCHLUMBERGER

1995-01-01

The effect of technical analyses on the performance of subsequent policies and actions in the foreign exchange markets is analysed using three cases. Results show that use of technical analyses is persistently profitable. Participants, however, tend to view short-term market risk as important and thus decide to forego some of the rules derived from technical analysis. This observation does not negate the theory on efficient learning.

An Intelligent technical analysis using neural network

Directory of Open Access Journals (Sweden)

Reza Raei

2011-07-01

Full Text Available Technical analysis has been one of the most popular methods for stock market predictions for the past few decades. There have been enormous technical analysis methods to study the behavior of stock market for different kinds of trading markets such as currency, commodity or stock. In this paper, we propose two different methods based on volume adjusted moving average and ease of movement for stock trading. These methods are used with and without generalized regression neural network methods and the results are compared with each other. The preliminary results on historical stock price of 20 firms indicate that there is no meaningful difference between various proposed models of this paper.

Comparative study of six sequential spectrophotometric methods for quantification and separation of ribavirin, sofosbuvir and daclatasvir: An application on Laboratory prepared mixture, pharmaceutical preparations, spiked human urine, spiked human plasma, and dissolution test.

Science.gov (United States)

Hassan, Wafaa S; Elmasry, Manal S; Elsayed, Heba M; Zidan, Dalia W

2018-05-18

In accordance with International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) guidelines, six novel, simple and precise sequential spectrophotometric methods were developed and validated for the simultaneous analysis of Ribavirin (RIB), Sofosbuvir (SOF), and Daclatasvir (DAC) in their mixture without prior separation steps. These drugs are described as co-administered for treatment of Hepatitis C virus (HCV). HCV is the cause of hepatitis C and some cancers such as liver cancer (hepatocellular carcinoma) and lymphomas in humans. These techniques consisted of several sequential steps using zero, ratio and/or derivative spectra. DAC was first determined through direct spectrophotometry at 313.7 nm without any interference of the other two drugs while RIB and SOF can be determined after ratio subtraction through five methods; Ratio difference spectrophotometric method, successive derivative ratio method, constant center, isoabsorptive method at 238.8 nm, and mean centering of the ratio spectra (MCR) at 224 nm and 258 nm for RIB and SOF, respectively. The calibration curve is linear over the concentration ranges of (6-42), (10-70) and (4-16) μg/mL for RIB, SOF, and DAC, respectively. This method was successfully applied to commercial pharmaceutical preparation of the drugs, spiked human urine, and spiked human plasma. The above methods are very simple methods that were developed for the simultaneous determination of binary and ternary mixtures and so enhance signal-to-noise ratio. The method has been successfully applied to the simultaneous analysis of RIB, SOF, and DAC in laboratory prepared mixtures. The obtained results are statistically compared with those obtained by the official or reported methods, showing no significant difference with respect to accuracy and precision at p = 0.05. Copyright © 2018 Elsevier B.V. All rights reserved.

Technical Analysis in Foreign Exchange - The Workhorse Gains Further Ground

OpenAIRE

Gehrig, Thomas; Menkhoff, Lukas

2003-01-01

This work extends earlier survey studies on the use of technical analysis by considering flow analysis as a third form of information production. Moreover the survey covers FX dealers and also the rising fund managers. Technical analysis has gained importance over time and is now the most equally spread kind of analysis. It has by far the greatest importance in FX dealing and is second in fund management. Charts are used for shorter-term forecasting horizons while flows dominate at the shorte...

Computer Support of Semantic Text Analysis of a Technical Specification on Designing Software

OpenAIRE

Zaboleeva-Zotova, Alla; Orlova, Yulia

2009-01-01

The given work is devoted to development of the computer-aided system of semantic text analysis of a technical specification. The purpose of this work is to increase efficiency of software engineering based on automation of semantic text analysis of a technical specification. In work it is offered and investigated a technique of the text analysis of a technical specification is submitted, the expanded fuzzy attribute grammar of a technical specification, intended for formaliza...

Characterization of technical surfaces by structure function analysis

Science.gov (United States)

Kalms, Michael; Kreis, Thomas; Bergmann, Ralf B.

2018-03-01

The structure function is a tool for characterizing technical surfaces that exhibits a number of advantages over Fourierbased analysis methods. So it is optimally suited for analyzing the height distributions of surfaces measured by full-field non-contacting methods. The structure function is thus a useful method to extract global or local criteria like e. g. periodicities, waviness, lay, or roughness to analyze and evaluate technical surfaces. After the definition of line- and area-structure function and offering effective procedures for their calculation this paper presents examples using simulated and measured data of technical surfaces including aircraft parts.

Analysis of Technical Efficiency of Small Holder Maize Growing ...

African Journals Online (AJOL)

The objective of this study was to examine the level of technical efficiency of smallholder maize producers and identify its determinants in Horo Guduru Wollega zone of Oromia Regional State, Ethiopia. A Cobb-Douglass stochastic production function model was used for the analysis. To specify technical inefficiency effects ...

77 FR 47501 - Applications for New Awards; Technical Assistance on State Data Collection, Analysis, and...

Science.gov (United States)

2012-08-08

... Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... for New Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA... Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on...

Vehicle Systems Analysis Technical Team Roadmap

Energy Technology Data Exchange (ETDEWEB)

None

2013-06-01

The mission of the Vehicle Systems Analysis Technical Team (VSATT) is to evaluate the performance and interactions of proposed advanced automotive powertrain components and subsystems, in a vehicle systems context, to inform ongoing research and development activities and maximize the potential for fuel efficiency improvements and emission reduction.

Analysis Of Natural Zeolites For Technical Nuclear

International Nuclear Information System (INIS)

Sarria, P.; Desdin, L.; Dominguez, O.

1999-01-01

In this article a methodology of elementary analysis of natural zeolites is reported using different technical nuclear (AANR, FRX, MRN and EG). Determines the elementary composition of ours of two Cuban locations. (Author) [es

Integrating technical analysis and public values in risk-based decision making

International Nuclear Information System (INIS)

Bohnenblust, Hans; Slovic, Paul

1998-01-01

Simple technical analysis cannot capture the complex scope of preferences or values of society and individuals. However, decision making needs to be sustained by formal analysis. The paper describes a policy framework which incorporates both technical analysis and aspects of public values. The framework can be used as a decision supporting tool and helps decision makers to make more informed and more transparent decisions about safety issues

Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

Science.gov (United States)

Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

Technical analysis in the foreign exchange market: a layman's guide

OpenAIRE

Christopher J. Neely

1997-01-01

Economists have traditionally been skeptical of the value of technical analysis, the use of past price behavior to guide trading decisions in asset markets. Instead, they have relied on the logic of the efficient markets hypothesis. Christopher J. Neely briefly explains the fundamentals of technical analysis and the efficient markets hypothesis as applied to the foreign exchange market, evaluates the profitability of simple trading rules, and reviews recent ideas that might justify extrapolat...

77 FR 47495 - Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting-National...

Science.gov (United States)

2012-08-08

... Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... 34 CFR Chapter III [CFDA Number 84.373Z] Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on Early Childhood...

On the Statistical Validation of Technical Analysis

Directory of Open Access Journals (Sweden)

Rosane Riera Freire

2007-06-01

Full Text Available Technical analysis, or charting, aims on visually identifying geometrical patterns in price charts in order to antecipate price "trends". In this paper we revisit the issue of thecnical analysis validation which has been tackled in the literature without taking care for (i the presence of heterogeneity and (ii statistical dependence in the analyzed data - various agglutinated return time series from distinct financial securities. The main purpose here is to address the first cited problem by suggesting a validation methodology that also "homogenizes" the securities according to the finite dimensional probability distribution of their return series. The general steps go through the identification of the stochastic processes for the securities returns, the clustering of similar securities and, finally, the identification of presence, or absence, of informatinal content obtained from those price patterns. We illustrate the proposed methodology with a real data exercise including several securities of the global market. Our investigation shows that there is a statistically significant informational content in two out of three common patterns usually found through technical analysis, namely: triangle, rectangle and head and shoulders.

Moving Mini-Max - a new indicator for technical analysis

OpenAIRE

Z. K. Silagadze

2008-01-01

We propose a new indicator for technical analysis. The indicator emphasizes maximums and minimums in price series with inherent smoothing and has a potential to be useful in both mechanical trading rules and chart pattern analysis.

Scanning electron microscopy analysis of marginal adaptation of composite resines to enamel after using of standard and gradual photopolimerization

Directory of Open Access Journals (Sweden)

Dačić Stefan

2014-01-01

Full Text Available Introduction. Bonding between composite and hard dental tissue is most commonly assessed by measuring bonding strength or absence of marginal gap along the restoration interface. Marginal index (MI is a significant indicator of the efficiency of the bond between material and dental tissue because it also shows the values of width and length of marginal gap. Objective. The aim of this investigation was to estimate quantitative and qualitative features of the bond between composite resin and enamel and to determine the values of MI in enamel after application of two techniques of photopolymerization with two composite systems. Methods. Forty Class V cavities on extracted teeth were prepared and restored for scanning electron microscope (SEM analysis of composite bonding to enamel. Adhesion to enamel was achieved by Adper Single Bond 2 - ASB (3M ESPE, or by Adper Easy One - AEO (3M ESPE. Photopolymerization of Filtek Ultimate - FU (3M ESPE was performed using constant halogen light (HIP or soft start program (SOF. Results. Quantitative and qualitative analysis, showed better mikromorphological bonding with SOF photopolymerization and ASB/FU composite system. Differences in MI between different photopolymerization techniques (HIP: 0.6707; SOF: 0.2395 were statistically significant (p<0.001, as well as differences between the composite systems (ASB/FU: 0.0470; AEO/ FU: 0.8651 (p<0.001 by two-way ANOVA test. Conclusion. Better marginal adaptation of composite to enamel was obtained with SOF photopolymerization in both composite systems.

Technical requirements document for the waste flow analysis

International Nuclear Information System (INIS)

Shropshire, D.E.

1996-05-01

Purpose of this Technical Requirements Document is to define the top level customer requirements for the Waste Flow Analysis task. These requirements, once agreed upon with DOE, will be used to flow down subsequent development requirements to the model specifications. This document is intended to be a ''living document'' which will be modified over the course of the execution of this work element. Initial concurrence with the technical functional requirements from Environmental Management (EM)-50 is needed before the work plan can be developed

Analysis of "The Wonderful Desert." Technical Report No. 170.

Science.gov (United States)

Green, G. M.; And Others

This report presents a text analysis of "The Wonderful Desert," a brief selection from the "Reader's Digest Skill Builder" series. (The techniques used in arriving at the analysis are presented in a Reading Center Technical Report, Number 168, "Problems and Techniques of Text Analysis.") Tables are given for a…

Modeling technical change in climate analysis: evidence from agricultural crop damages.

Science.gov (United States)

Ahmed, Adeel; Devadason, Evelyn S; Al-Amin, Abul Quasem

2017-05-01

This study accounts for the Hicks neutral technical change in a calibrated model of climate analysis, to identify the optimum level of technical change for addressing climate changes. It demonstrates the reduction to crop damages, the costs to technical change, and the net gains for the adoption of technical change for a climate-sensitive Pakistan economy. The calibrated model assesses the net gains of technical change for the overall economy and at the agriculture-specific level. The study finds that the gains of technical change are overwhelmingly higher than the costs across the agriculture subsectors. The gains and costs following technical change differ substantially for different crops. More importantly, the study finds a cost-effective optimal level of technical change that potentially reduces crop damages to a minimum possible level. The study therefore contends that the climate policy for Pakistan should consider the role of technical change in addressing climate impacts on the agriculture sector.

Influência do astigmatismo corneano na acuidade visual final após implante de AcrySof® ReSTOR®: relato de caso Influence of corneal astigmatism in final visual acuity after implantation of AcrySofTM ReSTOR TM: case report

Directory of Open Access Journals (Sweden)

Ricardo de Carvalho Rocha

2007-12-01

Full Text Available Atualmente tem-se desenvolvido novos tipos de lentes intra-oculares (LIO que objetivam eliminar a presbiopia e o seu uso vem se popularizando. Descreve-se o caso de um paciente com catarata bilateral e irregularidades corneanas e astigmatismo maior que 2 D à topografia, no qual implantou-se a LIO AcrySof® ReSTOR® no olho esquerdo associado à realização de incisões limbares relaxantes para tentar diminuir o astigmatismo corneano observado. A acuidade visual pós-operatória, tanto para perto quanto para longe, ficou abaixo das expectativas, sem melhora à refração e sem uma outra alteração que a justificasse, além das citadas. Após 45 dias, sem melhora da acuidade visual, efetuou-se o explante desta LIO, seguindo-se de implante de uma monofocal, sendo observada melhora da acuidade visual corrigida final. Assim, o presente caso clínico reforça a necessidade de uma correta seleção pré-operatória dos pacientes candidatos ao implante deste tipo de LIO multifocal, atentando inclusive para os dados topográficos.Currently, new types of intraocular lenses have been developed aiming to eliminate presbyopia and the use has become more popular. The authors report the case of a patient with bilateral cataract and corneal irregularities and astigmatism higher than 2D in the corneal topography, in which AcrySofTM ReSTOR TM intraocular lens was implanted in the left eye associated to relaxing limbal incisions trying to reduce corneal astigmatism. The near and distance postoperative visual acuity were worse than expected, with no improvement with refraction. Apparently, no other reason apart from irregular astigmatism/multifocal lens justified the low vision. After 45 days, with no visual acuity improvement, the intraocular lens was explanted and a monofocal one was implanted. The final corrected visual acuity improved. Thus, the present case emphasizes the need of a correct preoperative selection of patients to implant this type of

Data Analysis Details (DS): SE40_DS1 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available tware without cut off value and peaks are extracted from the text files by PowerFT ...SE40_DS1 PowerGet analysis for detection of all peaks Raw data files are converted to text file by MSGet sof

Data Analysis Details (DS): SE41_DS1 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available tware without cut off value and peaks are extracted from the text files by PowerFT ...SE41_DS1 PowerGet analysis for detection of all peaks Raw data files are converted to text file by MSGet sof

Technical and economic analysis of hydrogen refuelling

International Nuclear Information System (INIS)

Nistor, Silviu; Dave, Saraansh; Fan, Zhong; Sooriyabandara, Mahesh

2016-01-01

Highlights: • Technical and economic models of a hydrogen station for vehicles refuelling. • Hydrogen demand from fuel cell electric vehicles modelled stochastically. • Study case based on a UK pilot project. • Operation of the H_2 station using combined energy from wind and power grid is preferred. • Return on investment of 5–10 years is possible for the hydrogen station. - Abstract: This paper focuses on technical and economic analysis of a hydrogen refilling station to provide operational insight through tight coupling of technical models of physical processes and economic models. This allows the dynamic relationships of the system to be captured and analysed to provide short/medium term analytical capability to support system design, planning, and financing. The modelling developed here highlights the need to closely link technical and economic models for technology led projects where technical capability and commercial feasibility are important. The results show that hydrogen fuel can be competitive with petrol on a GBP/KG basis if the return on investment period is over 10 years for PEM electrolysers and 5 for Alkaline electrolysers. We also show that subsidies on capital costs (as reflected by some R&D funding programs) make both PEM and Alkaline technologies cheaper than the equivalent price of petrol, which suggests more emphasis should be put on commercialising R&D funded projects as they have commercial advantages. The paper also shows that a combined wind and grid connected station is preferable so that a higher number of customers are served (i.e. minimum shortage of hydrogen).

Accuracy Combination Test of Classical and Modern Technical Analysis: A Case Study in Stock of PT Wijaya Karya Tbk

Directory of Open Access Journals (Sweden)

Agustini Hamid

2016-05-01

Full Text Available The research aimed to measure the accuracy and combination of Classic and Modern Technical Analysis. PT Wijaya Karya Tbk (WIKA’s stock in two periods is the sample of research. Technical analysis was used to predict stock prices by observing changes in historical share price. Practically, technical analysis is divided into Classic Technical and Modern. Research was conducted by library study and using a computer software. Microsft Excel was used for the simulation and Chart Nexus for analyzing Modern Technical Analysis. The research period started in January 1, 2013 until December 31, 2013 and January 1, 2014 until December 31, 2014. The Classic Technical Analysis used Support, Resistance, Trendline, and Flag Patern. Meanwhile for Modern Technical Analysis used Moving Average, Stochastic, Moving Average Convergence Divergence (MACD indicator. The Classical Technical Analysis gave less result than Modern Technical Analysis. The classical give 14 investment decisions in two periods. The average return of Classical Technical is 15,50%. Meanwhile the Modern Technical Analysis gave 18 investment decisions in two periods. The average return of Modern Technical is 18,14%. Combining Classic Technical Analysis and Modern Technical Analysis gave 20 investment decisions with the average rate of return 20,41%.

Case studies: Risk-based analysis of technical specifications

International Nuclear Information System (INIS)

Wagner, D.P.; Minton, L.A.; Gaertner, J.P.

1987-01-01

The SOCRATES computer program uses the results of a Probabilistic Risk Assessment (PRA) or a system level risk analysis to calculate changes in risk due to changes in the surveillance test interval and/or the allowed outage time stated in the technical specification. The computer program can accommodate various testing strategies (such as staggered or simultaneous testing) to allow modeling of component testing as it is carried out at a plant. The methods and computer program are an integral part of a larger decision process aimed at determining benefits from technical specification changes. These benefits can include cost savings to the utilities by reducing forced shutdowns with no adverse impacts on risk. Three summaries of case study applications are included to demonstrate the types of results that can be achieved through risk-based evaluation of technical specifications. (orig.)

Analysis of Technical Feasibility of Traveling Wave Reactor

International Nuclear Information System (INIS)

Kim, Sang Ji; Yoo, Jae Woon; Bae, In Ho

2011-01-01

The status and trend of TWR, patent status and its major technical characteristics were examined in this study. Main technical features of traveling wave reactor can be characterized as a reactor operation without refueling up to the reactor life more than 60 years and TWR utilizes depleted uranium which would be produced from the enrichment process as a byproduct. Enriched fuel is only loaded to an igniter which is required for initiation of burning wave. In this study, quantitative analysis of TWR arising from the technical features was carried out in terms of resource utilization, safety and integrity, and proliferation resistance. In parallel with the concept review of TerraPower SWR design concepts, independent analysis of SWR design by altering a design specification and operation strategy was done in this study. The fuel rod design of SWR was also investigated based on the current database of fuel irradiation and performance. The technical issues of TWR or SWR which should be prior to detailed research and development can be summarized as follows: ·Strong physical protection is required during the shuffling or in-service inspection period to improve the proliferation resistance. ·New flow control logic or device is required for distributing the assembly-wise flow to be corresponded with power swing of fuel assembly. ·High integrity cladding material need to be developed for covering the high fast neutron fluence more than three times of current limit which result from the high burnup and long fuel cycle. The metal fuel under the high burnup condition should be validated through the irradiation test

User testing and stakeholder feedback contributed to the development of understandable and useful Summary of Findings tables for Cochrane reviews.

Science.gov (United States)

Rosenbaum, Sarah E; Glenton, Claire; Nylund, Hilde Kari; Oxman, Andrew D

2010-06-01

To develop a Summary of Findings (SoF) table for use in Cochrane reviews that is understandable and useful for health professionals, acceptable to Cochrane Collaboration stakeholders, and feasible to implement. We gathered stakeholder feedback on the format and content of an SoF table from an advisory group of more than 50 participants and their constituencies through e-mail consultations. We conducted user tests using a think-aloud protocol method, collecting feedback from 21 health professionals and researchers in Norway and the UK. We analyzed the feedback, defined problem areas, and generated new solutions in brainstorming workshops. Stakeholders were concerned about precision in the data representation and about production feasibility. User testing revealed unexpected comprehension problems, mainly confusion about what the different numbers referred to (class reference). Resolving the tension between achieving table precision and table simplicity became the main focus of the working group. User testing led to a table more useful and understandable for clinical audiences. We arrived at an SoF table that was acceptable to the stakeholders and in principle feasible to implement technically. Some challenges remain, including presenting continuous outcomes and technical/editorial implementation.

Comparative analysis of technical efficiencies between compound ...

African Journals Online (AJOL)

This study was designed to compare the level of technical efficiency in the compound and non compound farms in Imo state. A multi-stage random sampling technique was used to select 120 food crop farmers from two out of the three agricultural zones in Imo state. Using the Chow (1960) analysis of covariance technique ...

Stock market prediction using technical analysis

Directory of Open Access Journals (Sweden)

Bradić-Martinović Aleksandra

2006-01-01

Full Text Available Technical analysis (TA is a form of analyzing market encompassing supply and demand of securities according to the study of their prices and trading volume. Using the appropriate methods, TA aims to identify price movements in the stock market, futures or currencies. In short, TA analysis is the process by which "future price movements are formulated according to the price history". TA originates from the work of Charles Dow and his conclusions about the global behavior of the market, as well as from Elliot Wave Theory. Dow did not regard its theory as a tool for stock market movement prediction, nor as a guide for investors, but as a kind of barometer of general market movements. The term TA methods encompasses all the methods used in tracking prices aiming to clearly predict future events. Many different methods, mainly statistical, are used in technical analysis, the most popular ones being: establishing and following trends using moving average, recognizing price momentum, calculating indicators and oscillators, as well as cycle analysis (structure indicators. It is also necessary to point out that TA is not a science in the true meaning of the term, and that methods it uses frequently deviate from the conventional manner of their use. The main advantage of these methods is their relative ease of use, aiming to give as clear picture as possible of price movements, while at the same time avoiding the use of complicated and complex mathematical methods. The reason for this is simple and is reflected in the dynamics of financial markets, where changes occur during short periods of time and where prompt decision-making is of vital importance.

Contract Source Selection: An Analysis of Lowest Price Technically Acceptable and Tradeoff Strategies

Science.gov (United States)

2016-06-15

using- spss - statistics.php Lamoureux, J., Murrow, M., & Walls, C. (2015). Relationship of source selection methods to contract outcomes: an analysis ...Contract Source Selection: an Analysis of Lowest Price Technically Acceptable and Tradeoff Strategies 15 June 2016 LCDR Jamal M. Osman, USN...ACQUISITION RESEARCH PROGRAM SPONSORED REPORT SERIES Contract Source Selection: an Analysis of Lowest Price Technically Acceptable and Tradeoff

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.157 Section 52.157 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

Benefit-Cost Analysis of Integrated Paratransit Systems : Volume 6. Technical Appendices.

Science.gov (United States)

1979-09-01

This last volume, includes five technical appendices which document the methodologies used in the benefit-cost analysis. They are the following: Scenario analysis methodology; Impact estimation; Example of impact estimation; Sensitivity analysis; Agg...

Technical efficiency of district hospitals: Evidence from Namibia using Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Mutirua Kautoo

2006-03-01

Full Text Available Abstract Background In most countries of the sub-Saharan Africa, health care needs have been increasing due to emerging and re-emerging health problems. However, the supply of health care resources to address the problems has been continuously declining, thus jeopardizing the progress towards achieving the health-related Millennium Development Goals. Namibia is no exception to this. It is therefore necessary to quantify the level of technical inefficiency in the countries so as to alert policy makers of the potential resource gains to the health system if the hospitals that absorb a lion's share of the available resources are technically efficient. Method All public sector hospitals (N = 30 were included in the study. Hospital capacity utilization ratios and the data envelopment analysis (DEA technique were used to assess technical efficiency. The DEA model used three inputs and two outputs. Data for four financial years (1997/98 to 2000/2001 was used for the analysis. To test for the robustness of the DEA technical efficiency scores the Jackknife analysis was used. Results The findings suggest the presence of substantial degree of pure technical and scale inefficiency. The average technical efficiency level during the given period was less than 75%. Less than half of the hospitals included in the study were located on the technically efficient frontier. Increasing returns to scale is observed to be the predominant form of scale inefficiency. Conclusion It is concluded that the existing level of pure technical and scale inefficiency of the district hospitals is considerably high and may negatively affect the government's initiatives to improve access to quality health care and scaling up of interventions that are necessary to achieve the health-related Millennium Development Goals. It is recommended that the inefficient hospitals learn from their efficient peers identified by the DEA model so as to improve the overall performance of the health

Selection of Belt Conveyors Drive Units Number by Technical –Economical Analysis

OpenAIRE

Despodov, Zoran; Mijalkovski, Stojance; Adjiski, Vancho; Panov, Zoran

2014-01-01

In this paper is presented a methodology for selection of belt conveyor drive units number by technical - economical analysis of their parameters. Belt Conveyors with follow drive arrangement will be considered: one, two, three and four drive units. In the technical - economical analysis are including: Tension forces, Power of belt conveyor, Costs for belt, Costs for power and reducers, Total cost for belt conveyor system.

Revisiting policy on chronic HCV treatment under the Thai Universal Health Coverage: An economic evaluation and budget impact analysis.

Science.gov (United States)

Rattanavipapong, Waranya; Anothaisintawee, Thunyarat; Teerawattananon, Yot

2018-01-01

Thailand is encountering challenges to introduce the high-cost sofosbuvir for chronic hepatitis C treatment as part of the Universal Health Care's benefit package. This study was conducted in respond to policy demand from the Thai government to assess the value for money and budget impact of introducing sofosbuvir-based regimens in the tax-based health insurance scheme. The Markov model was constructed to assess costs and benefits of the four treatment options that include: (i) current practice-peginterferon alfa (PEG) and ribavirin (RBV) for 24 weeks in genotype 3 and 48 weeks for other genotypes; (ii) Sofosbuvir plus peginterferon alfa and ribavirin (SOF+PEG-RBV) for 12 weeks; (iii) Sofosbuvir and daclatasvir (SOF+DCV) for 12 weeks; (iv) Sofosbuvir and ledipasvir (SOF+LDV) for 12 weeks for non-3 genotypes and SOF+PEG-RBV for 12 weeks for genotype 3 infection. Given that policy options (ii) and (iii) are for pan-genotypic infection, the cost of genotype testing was applied only for policy options (i) and (iv). Results reveal that all sofosbuvir-based regimens had greater quality adjusted life years (QALY) gains compared with the current treatment, therefore associated with lower lifetime costs and more favourable health outcomes. Additionally, among the three regimens of sofosbuvir, SOF+PEG-RBV for genotype 3 and SOF+LDV for non-3 genotype are the most cost-effective treatment option with the threshold of 160,000 THB per QALY gained. The results of this study had been used in policy discussion which resulted in the recent inclusion of SOF+PEG-RBV for genotype 3 and SOF+LDV for non-3 genotype in the Thailand's benefit package.

Problems about the analysis of technical requirements compliance in NPPPCI systems

International Nuclear Information System (INIS)

Perello, M.

1978-01-01

The display of the problems that the analysis of the technical requirements compliance bring along is presented. In the project of nuclear power plants, above all, the influence of national and international standards in the analysis of the adjustment of requirements established by the governments of nuclear safety of the different countries. In the oral presentation greater emphasis is made on the difficulties that the PSAR evaluation brings when the lack of technical standards in the owner country makes necessary the use of other countries rules. (author)

78 FR 39284 - Technical Guidance for Assessing Environmental Justice in Regulatory Analysis

Science.gov (United States)

2013-07-01

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OA-2013-0320; FRL-9830-1] Technical Guidance for Assessing Environmental Justice in Regulatory Analysis AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... Environmental Protection Agency (EPA) issued for public comment a document entitled, ``Technical Guidance for...

Refurbishment of Railroad Crossties : A Technical and Economic Analysis

Science.gov (United States)

1977-12-01

An analysis of the principal modes of failure for wooden railroad crossties was conducted and an evaluation of the technical and economic feasibility of refurbishing these ties was conducted. Among the principal modes of structural deterioration, onl...

Prediction equation for estimating total daily energy requirements of special operations personnel.

Science.gov (United States)

Barringer, N D; Pasiakos, S M; McClung, H L; Crombie, A P; Margolis, L M

2018-01-01

Special Operations Forces (SOF) engage in a variety of military tasks with many producing high energy expenditures, leading to undesired energy deficits and loss of body mass. Therefore, the ability to accurately estimate daily energy requirements would be useful for accurate logistical planning. Generate a predictive equation estimating energy requirements of SOF. Retrospective analysis of data collected from SOF personnel engaged in 12 different SOF training scenarios. Energy expenditure and total body water were determined using the doubly-labeled water technique. Physical activity level was determined as daily energy expenditure divided by resting metabolic rate. Physical activity level was broken into quartiles (0 = mission prep, 1 = common warrior tasks, 2 = battle drills, 3 = specialized intense activity) to generate a physical activity factor (PAF). Regression analysis was used to construct two predictive equations (Model A; body mass and PAF, Model B; fat-free mass and PAF) estimating daily energy expenditures. Average measured energy expenditure during SOF training was 4468 (range: 3700 to 6300) Kcal·d- 1 . Regression analysis revealed that physical activity level ( r  = 0.91; P  plan appropriate feeding regimens to meet SOF nutritional requirements across their mission profile.

10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. (a) The application must contain a final safety... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.79 Section 52.79 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

Can Technical Analysis Signals Detect Price Reactions Around Earnings Announcement?: Evidence from Indonesia

OpenAIRE

Dedhy Sulistiawan; Jogiyanto Hartono

2014-01-01

This study examines whether technical analysis signals can detect price reactions before and after earnings announcement dates in Indonesian stock market. Earnings announcements produce reactions, both before and after the announcements. Informed investors may use private information before earnings announcements (Christophe, Ferri and Angel, 2004; Porter, 1992). Using technical analysis signals, this study expects that retail investors (uninformed investors) can detect preannouncements react...

An analysis of factors that influence the technical efficiency of Malaysian thermal power plants

International Nuclear Information System (INIS)

See, Kok Fong; Coelli, Tim

2012-01-01

The main objectives of this paper are to measure the technical efficiency levels of Malaysian thermal power plants and to investigate the degree to which various factors influence efficiency levels in these plants. Stochastic frontier analysis (SFA) methods are applied to plant-level data over an eight year period from 1998 to 2005. This is the first comprehensive analysis (to our knowledge) of technical efficiency in the Malaysian electricity generation industry using parametric method. Our empirical results indicate that ownership, plant size and fuel type have a significant influence on technical efficiency levels. We find that publicly-owned power plants obtain average technical efficiencies of 0.68, which is lower than privately-owned power plants, which achieve average technical efficiencies of 0.88. We also observe that larger power plants with more capacity and gas-fired power plants tend to be more technically efficient than other power plants. Finally, we find that plant age and peaking plant type have no statistically significant influence on the technical efficiencies of Malaysian thermal power plants. - Highlights: ► We examine the technical efficiency (TE) levels of Malaysian thermal power plants. ► We also investigate the degree to which various factors influence efficiency levels in these plants. ► Stochastic frontier analysis methods are used. ► Average plant would have to increase their TE level by 21% to reach the efficient frontier. ► Ownership, plant size and fuel type have a significant influence on the TE levels.

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

Science.gov (United States)

Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

2003-01-01

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

Content Analysis as a Best Practice in Technical Communication Research

Science.gov (United States)

Thayer, Alexander; Evans, Mary; McBride, Alicia; Queen, Matt; Spyridakis, Jan

2007-01-01

Content analysis is a powerful empirical method for analyzing text, a method that technical communicators can use on the job and in their research. Content analysis can expose hidden connections among concepts, reveal relationships among ideas that initially seem unconnected, and inform the decision-making processes associated with many technical…

A comparison of visual outcomes in three different types of monofocal intraocular lenses.

Science.gov (United States)

Shetty, Vijay; Haldipurkar, Suhas S; Gore, Rujuta; Dhamankar, Rita; Paik, Anirban; Setia, Maninder Singh

2015-01-01

To compare the visual outcomes (distance and near) in patients opting for three different types of monofocal intraocular lens (IOL) (Matrix Aurium, AcrySof single piece, and AcrySof IQ lens). The present study is a cross-sectional analysis of secondary clinical data collected from 153 eyes (52 eyes in Matrix Aurium, 48 in AcrySof single piece, and 53 in AcrySof IQ group) undergoing cataract surgery (2011-2012). We compared near vision, distance vision, distance corrected near vision in these three types of lenses on day 15 (±3) post-surgery. About 69% of the eyes in the Matrix Aurium group had good uncorrected distance vision post-surgery; the proportion was 48% and 57% in the AcrySof single piece and AcrySof IQ group (P=0.09). The proportion of eyes with good distance corrected near vision were 38%, 33%, and 15% in the Matrix Aurium, AcrySof single piece, and AcrySof IQ groups respectively (P=0.02). Similarly, The proportion with good "both near and distance vision" were 38%, 33%, and 15% in the Matrix Aurium, AcrySof single piece, and AcrySof IQ groups respectively (P=0.02). It was only the Matrix Aurium group which had significantly better both "distance and near vision" compared with the AcrySof IQ group (odds ratio: 5.87, 95% confidence intervals: 1.68 to 20.56). Matrix Aurium monofocal lenses may be a good option for those patients who desire to have a good near as well as distance vision post-surgery.

Technical innovation and management

Energy Technology Data Exchange (ETDEWEB)

Yoon, Yang Cheol

1982-08-15

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

Technical innovation and management

International Nuclear Information System (INIS)

Yoon, Yang Cheol

1982-08-01

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

Analysis of farm household technical efficiency in small-scale ...

African Journals Online (AJOL)

Data Envelopment Analysis (DEA) was applied to farm-level cross-sectional data collected in mid-2013 after the implementation of CIP activities. Our empirical results indicate that CIP participants and improved farmers (using using both traditional and modern hives) had the highest average levels of technical efficiencies.

Budget impact analysis of sofosbuvir-based regimens for the treatment of HIV/HCV-coinfected patients in northern Italy: a multicenter regional simulation

Directory of Open Access Journals (Sweden)

Cenderello G

2015-12-01

Full Text Available Giovanni Cenderello,1 Stefania Artioli,2 Claudio Viscoli,3 Ambra Pasa,4 Mauro Giacomini,5 Barbara Giannini,5 Chiara Dentone,6 Laura Ambra Nicolini,3 Giovanni Cassola,1 Antonio Di Biagio31Infectious Diseases Unit EO, Ospedali Galliera, Genoa, 2Infectious Diseases Unit, ASL-5 Spezzina, La Spezia, 3Infectious Diseases Unit, AOU San Martino, IST, Genoa University, Genoa, 4IT Unit, Ospedali Galliera, Genoa, 5Department of Informatics, Bioengineering, Robotics and System Engineering (DIBRIS, University of Genoa, Genova, 6Infectious Diseases Unit, ASL-1 Imperiese, Sanremo, Imperia, ItalyObjectives: Chronic hepatitis C virus (HCV is a leading cause of hospitalization and death in populations coinfected with human immunodeficiency virus (HIV. Sofosbuvir (SOF is a pan-genotypic drug that should be combined with other agents as an oral treatment for HCV. We performed a 5-year horizon budget impact analysis of SOF-based regimens for the management of HIV/HCV-coinfected patients.Methods: A multicenter, prospective evaluation was conducted, involving four Italian Infectious Diseases Departments (Galliera, San Martino, Sanremo, and La Spezia. All 1,005 genotype-coinfected patients (30% cirrhotics under observation were considered (patients in all disease-stages were considered: chronic hepatitis C, cirrhosis, transplant, hepatocellular carcinoma. Disease stage costs per patient were collected; the expected disease progression in the absence of treatment and sustained virological response (SVR success rate for SOF-based regimens were calculated based on the literature and expert opinion. Drug prices were based on what the National Health Service paid for them. The comparison of "no treatment" disease progression costs versus the economic impact of SOF-based regimens was investigated.Results: Over the following 5 years, the disease progression scenario resulted in direct costs of approximately €54 million. Assuming an SVR success rate of 90%, average SOF

Technical- and environmental-efficiency analysis of irrigated cotton-cropping systems in Punjab, Pakistan using data envelopment analysis.

Science.gov (United States)

Ullah, Asmat; Perret, Sylvain R

2014-08-01

Cotton cropping in Pakistan uses substantial quantities of resources and adversely affects the environment with pollutants from the inputs, particularly pesticides. A question remains regarding to what extent the reduction of such environmental impact is possible without compromising the farmers' income. This paper investigates the environmental, technical, and economic performances of selected irrigated cotton-cropping systems in Punjab to quantify the sustainability of cotton farming and reveal options for improvement. Using mostly primary data, our study quantifies the technical, cost, and environmental efficiencies of different farm sizes. A set of indicators has been computed to reflect these three domains of efficiency using the data envelopment analysis technique. The results indicate that farmers are broadly environmentally inefficient; which primarily results from poor technical inefficiency. Based on an improved input mix, the average potential environmental impact reduction for small, medium, and large farms is 9, 13, and 11 %, respectively, without compromising the economic return. Moreover, the differences in technical, cost, and environmental efficiencies between small and medium and small and large farm sizes were statistically significant. The second-stage regression analysis identifies that the entire farm size significantly affects the efficiencies, whereas exposure to extension and training has positive effects, and the sowing methods significantly affect the technical and environmental efficiencies. Paradoxically, the formal education level is determined to affect the efficiencies negatively. This paper discusses policy interventions that can improve the technical efficiency to ultimately increase the environmental efficiency and reduce the farmers' operating costs.

Evaluating Technical Efficiency of Nursing Care Using Data Envelopment Analysis and Multilevel Modeling.

Science.gov (United States)

Min, Ari; Park, Chang Gi; Scott, Linda D

2016-05-23

Data envelopment analysis (DEA) is an advantageous non-parametric technique for evaluating relative efficiency of performance. This article describes use of DEA to estimate technical efficiency of nursing care and demonstrates the benefits of using multilevel modeling to identify characteristics of efficient facilities in the second stage of analysis. Data were drawn from LTCFocUS.org, a secondary database including nursing home data from the Online Survey Certification and Reporting System and Minimum Data Set. In this example, 2,267 non-hospital-based nursing homes were evaluated. Use of DEA with nurse staffing levels as inputs and quality of care as outputs allowed estimation of the relative technical efficiency of nursing care in these facilities. In the second stage, multilevel modeling was applied to identify organizational factors contributing to technical efficiency. Use of multilevel modeling avoided biased estimation of findings for nested data and provided comprehensive information on differences in technical efficiency among counties and states. © The Author(s) 2016.

Predictors of employer satisfaction: technical and non-technical skills.

Science.gov (United States)

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Technical efficiency analysis for oilseed sunflower farms: a case study in Erzurum, Turkey.

Science.gov (United States)

Külekçi, Murat

2010-07-01

The main purpose of this study was to examine the technical efficiency of farms producing sunflower in Erzurum, Turkey and to identify factors that might be causing inefficiency. Stochastic frontier analysis was used to measure technical efficiency. One hundred and seventeen randomly selected farms were interviewed for farm-level data in the 2004-2005 production period. Results revealed that the mean technical efficiency for the sunflower farms, estimated by the stochastic production frontier, is 64%. At full technical efficiency, on average, the farmers could reduce their inputs by around 56% without reducing their sunflower production, simply by improving technical efficiency. In the inefficiency model the parameter estimates showed that older farmers, higher level of farmer's education, more experienced farmers, larger farm size and higher information score resulted in lower technical inefficiency, while bigger family size and more credit usage resulted in higher technical inefficiency. This study proposes strategies such as providing better extension services and farmer-training programmes, including more educated people in sunflower farming and also expanding the sunflower-growing area through provision of adequate facilities in order to increase technical efficiency.

Are chartists artists? The determinants and profitability of recommendations based on technical analysis

NARCIS (Netherlands)

Gerritsen, Dirk F.

2016-01-01

The value of technical analysis (TA) has been debated for decades; however, limited evidence exists on the profitability of investment recommendations issued by technical analysts. These ‘chartists’ sometimes claim that TA is an art rather than a science. We evaluated > 5000 TA-based buy and sell

Risk-based analysis methods applied to nuclear power plant technical specifications

International Nuclear Information System (INIS)

Wagner, D.P.; Minton, L.A.; Gaertner, J.P.

1989-01-01

A computer-aided methodology and practical applications of risk-based evaluation of technical specifications are described. The methodology, developed for use by the utility industry, is a part of the overall process of improving nuclear power plant technical specifications. The SOCRATES computer program uses the results of a probabilistic risk assessment or a system-level risk analysis to calculate changes in risk due to changes in the surveillance test interval and/or the allowed outage time stated in the technical specification. The computer program can accommodate various testing strategies (such as staggered or simultaneous testing) to allow modeling of component testing as it is carried out at the plant. The methods and computer program are an integral part of a larger decision process aimed at determining benefits from technical specification changes. These benefits can include cost savings to the utilities by reducing forced shutdowns and decreasing labor requirements for test and maintenance activities, with no adverse impacts on risk. The methodology and the SOCRATES computer program have been used extensively toe valuate several actual technical specifications in case studies demonstrating the methods. Summaries of these applications demonstrate the types of results achieved and the usefulness of the risk-based evaluation in improving the technical specifications

Technical document characterization by data analysis

International Nuclear Information System (INIS)

Mauget, A.

1993-05-01

Nuclear power plants possess documents analyzing all the plant systems, which represents a vast quantity of paper. Analysis of textual data can enable a document to be classified by grouping the texts containing the same words. These methods are used on system manuals for feasibility studies. The system manual is then analyzed by LEXTER and the terms it has selected are examined. We first classify according to style (sentences containing general words, technical sentences, etc.), and then according to terms. However, it will not be possible to continue in this fashion for the 100 system manuals existing, because of lack of sufficient storage capacity. Another solution is being developed. (author)

The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

Science.gov (United States)

McGhee, D. S.

2006-01-01

Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

Analysis of Technical Specifications of the Egyptian and French Electronic Storybooks (e-Storybook)

Science.gov (United States)

Atta, Mohammed Mahmoud; Abd El Wahab, Shaimaa Mahmoud

2015-01-01

This research aims at analysing technical specifications in a sample of Egyptian and French electronic storybooks (e-storybooks), to identify similarities and differences in technical specifications of children's e-storybooks and create a verified analysis list to be used for evaluation of e-storybooks. For this purpose, 32 e-storybooks in CD…

Technical Efficiency of Thai Manufacturing SMEs: A Stochastic Frontier Analysis

Directory of Open Access Journals (Sweden)

Teerawat Charoenrat

2013-03-01

Full Text Available AbstractA major motivation of this study is to examine the factors that are the most important in contributing to the relatively poor efficiency performance of Thai manufacturing small and medium sized enterprises (SMEs. The results obtained will be significant in devising effective policies aimed at tackling this poor performance.This paper uses data on manufacturing SMEs in the North-eastern region of Thailand in 2007 as a case study, by applying a stochastic frontier analysis (SFA and a technical inefficiency effects model. The empirical results obtained indicate that the mean technical efficiency of all categories of manufacturing SMEs in theNorth-eastern region is 43%, implying that manufacturing SMEs have high levels of technical inefficiency in their production processes.Manufacturing SMEs in the North-eastern region are particularly labour-intensive. The empirical results of the technical inefficiency effects model suggest that skilled labour, the municipal area and ownership characteristics are important firm-specific factors affecting technical efficiency. The paper argues that the government should play a more substantial role in developing manufacturing SMEs in the North-eastern provinces through: providing training programs for employees and employers; encouraging a greater usage of capital and technology in the production process of SMEs; enhancing the efficiency of state-ownedenterprises; encouraging a wide range of ownership forms; and improving information and communications infrastructure.

Comparative technical-economic analysis of the low temperature heating systems

International Nuclear Information System (INIS)

Sharevski, Vasko; Sharevski, Milan

1994-01-01

A method for comparative technical-economic analysis between low temperature heating systems and heating systems with fossil fuel boiler plant, heat pump heating system and electrical heating systems is presented. The single and combined heating systems are analyzed. The technical-economic priority application of the heating system is determined according to the prices of the low temperature heat energy, fossil fuel heat energy, electrical energy, as well as to the coefficient of the annual use of the installed heating capacity, investment expenses, structure of the combined heating system and coefficient of performances of the heat pump. The combined heating system, composed with a low temperature heating subsystem, which is used to cover the base heat demands, and a oil boiler plant heating subsystem, for the top heat demands, have technical-economic justification and wide range of priority application, in comparison with single heating systems. (author)

Accuracy Combination Test of Classical and Modern Technical Analysis: A Case Study in Stock of PT Wijaya Karya Tbk

OpenAIRE

Agustini Hamid

2016-01-01

The research aimed to measure the accuracy and combination of Classic and Modern Technical Analysis. PT Wijaya Karya Tbk (WIKA)’s stock in two periods is the sample of research. Technical analysis was used to predict stock prices by observing changes in historical share price. Practically, technical analysis is divided into Classic Technical and Modern. Research was conducted by library study and using a computer software. Microsft Excel was used for the simulation and Chart Nexus for analyzi...

Technical analysis of photovoltaic/wind systems with hydrogen storage

Directory of Open Access Journals (Sweden)

Bakić Vukman V.

2012-01-01

Full Text Available The technical analysis of a hybrid wind-photovoltaic energy system with hydrogen gas storage was studied. The market for the distributed power generation based on renewable energy is increasing, particularly for the standalone mini-grid applications. The main design components of PV/Wind hybrid system are the PV panels, the wind turbine and an alkaline electrolyzer with tank. The technical analysis is based on the transient system simulation program TRNSYS 16. The study is realized using the meteorological data for a Typical Metrological Year (TMY for region of Novi Sad, Belgrade cities and Kopaonik national park in Serbia. The purpose of the study is to design a realistic energy system that maximizes the use of renewable energy and minimizes the use of fossil fuels. The reduction in the CO2 emissions is also analyzed in the paper. [Acknowledgment. This paper is the result of the investigations carried out within the scientific project TR33036 supported by the Ministry of Science of the Republic of Serbia.

RepExplore: addressing technical replicate variance in proteomics and metabolomics data analysis.

Science.gov (United States)

Glaab, Enrico; Schneider, Reinhard

2015-07-01

High-throughput omics datasets often contain technical replicates included to account for technical sources of noise in the measurement process. Although summarizing these replicate measurements by using robust averages may help to reduce the influence of noise on downstream data analysis, the information on the variance across the replicate measurements is lost in the averaging process and therefore typically disregarded in subsequent statistical analyses.We introduce RepExplore, a web-service dedicated to exploit the information captured in the technical replicate variance to provide more reliable and informative differential expression and abundance statistics for omics datasets. The software builds on previously published statistical methods, which have been applied successfully to biomedical omics data but are difficult to use without prior experience in programming or scripting. RepExplore facilitates the analysis by providing a fully automated data processing and interactive ranking tables, whisker plot, heat map and principal component analysis visualizations to interpret omics data and derived statistics. Freely available at http://www.repexplore.tk enrico.glaab@uni.lu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

Intensive skills week for military medical students increases technical proficiency, confidence, and skills to minimize negative stress.

Science.gov (United States)

Mueller, Genevieve; Hunt, Bonnie; Wall, Van; Rush, Robert; Molof, Alan; Schoeff, Jonathan; Wedmore, Ian; Schmid, James; Laporta, Anthony

2012-01-01

The effects of stress induced cortisol on learning and memory is well documented in the literature.1-3 Memory and learning are enhanced at low levels while high levels are detrimental. Repetitive training in stressful situations enables management of the stress response4 as demonstrated by the high intensity training military members undergo to prepare for tactical situations. Appropriate management of one?s stress response is critical in the medical field, as the negative effects of stress can potentially hinder life-saving procedures and treatments. This also applies to physicians-in-training as they learn and practice triage, emergency medicine, and surgical skills prior to graduation. Rocky Vista University?s Military Medicine Honor?s Track (MMHT) held a week long high-intensity emergency medicine and surgical Intensive Skills Week (ISW), facilitated by military and university physicians, to advance students? skills and maximize training using the Human Worn Partial Surgical Task Simulator (Cut Suit). The short-term goal of the ISW was to overcome negative stress responses to increase confidence, technical and non-technical knowledge, and skill in surgery and emergency medicine in an effort to improve performance as third-year medical students. The long-term goal was to enhance performance and proficiency in residency and future medical practice. The metrics for the short-term goals were the focus of this pilot study. Results show an increase in confidence and decrease in perceived stress as well as statistically significant improvements in technical and non-technical skills and surgical instrumentation knowledge throughout the week. There is a correlative benefit to physician and non-physician military personnel, especially Special Operations Forces (SOF) medical personnel, from developing and implementing similar training programs when live tissue or cadaver models are unavailable or unfeasible. 2012.

Micro-costing analysis of guideline-based treatment by direct-acting agents: the real-life case of hepatitis C management in Brazil.

Science.gov (United States)

Perazzo, Hugo; Jorge, Marcelino Jose; Silva, Julio Castro; Avellar, Alexandre Monken; Silva, Patrícia Santos; Romero, Carmen; Veloso, Valdilea Gonçalves; Mujica-Mota, Ruben; Anderson, Rob; Hyde, Chris; Castro, Rodolfo

2017-11-23

Eradication of hepatitis C virus (HCV) using direct-acting agents (DAA) has been associated with a financial burden to health authorities worldwide. We aimed to evaluate the guideline-based treatment costs by DAAs from the perspective of the Brazilian Ministry of Health (BMoH). The activity based costing method was used to estimate the cost for monitoring/treatment of genotype-1 (GT1) HCV patients by the following strategies: peg-interferon (PEG-IFN)/ribavirin (RBV) for 48 weeks, PEG-IFN/RBV plus boceprevir (BOC) or telaprevir (TEL) for 48 weeks, and sofosbuvir (SOF) plus daclastavir (DCV) or simeprevir (SIM) for 12 weeks. Costs were reported in United States Dollars without (US$) and with adjustment for purchasing power parity (PPP$). Drug costs were collected at the National Database of Health Prices and an overview of the literature was performed to assess effectiveness of SOF/DCV and SOF/SIM regimens in real-world cohorts. Treatment costs of GT1-HCV patients were PPP$ 43,176.28 (US$ 24,020.16) for PEG-IFN/RBV, PPP$ 71,196.03 (US$ 39,578.23) for PEG-IFN/RBV/BOC and PPP$ 86,250.33 (US$ 47,946.92) for PEG-IFN/RBV/TEL. Treatment by all-oral interferon-free regimens were the less expensive approach: PPP$ 19,761.72 (US$ 10,985.90) for SOF/DCV and PPP$ 21,590.91 (US$ 12,002.75) for SOF/SIM. The overview reported HCV eradication in up to 98% for SOF/DCV and 96% for SOF/SIM. Strategies with all oral interferon-free might lead to lower costs for management of GT1-HCV patients compared to IFN-based regimens in Brazil. This occurred mainly because of high discounts over international DAA prices due to negotiation between BMoH and pharmaceutical industries.

Grain intermodal terminals: evaluation of pure technical efficiency by Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Maria Gabriela Mendonça Peixoto

Full Text Available Abstract This paper aimed to verify if terminals with productive efficiency also have pure technical efficiency, using DEA (Data Envelopment Analysis technique. The research approach was the qualitative-quantitative or mixed, with exploratory purpose; the research method defined was the case study (multicases; data were collected through interviews using a structured questionnaire and non-probability for convenience sampling. While the application of Charnes, Cooper and Rhodes (CCR model observed that only three (4, 7 and 11, of the twelve analyzed Decision Making Units (DMUs have total technical efficiency, through Banker, Charnes and Cooper (BCC model, it was possible to observe that these terminals were the only ones with pure technical efficiency. The three inefficient DMUs (1, 2 and 12 showed pure technical efficiency, suggesting that these terminals might present probable scale operations’ inefficiency, aspect not addressed in this paper.

Technical noise supplement : TeNS : a technical supplement to the Traffic Noise Analysis Protocol.

Science.gov (United States)

1998-10-01

The purpose of this Technical Noise Supplement (TeNS) is to provide technical background : information on transportation-related noise in general and highway traffic noise in : particular. It is designed to elaborate on technical concepts and procedu...

The Technical Report: An Analysis of Information Design and Packaging for an Inelastic Market.

Science.gov (United States)

Pinelli, Thomas E.; And Others

As part of an evaluation of its scientific and technical information program, the National Aeronautics and Space Administration (NASA) conducted a review and analysis of structural, language, and presentation components of its technical report form. The investigation involved comparing and contrasting NASA's publications standards for technical…

Technical and Feasibility Analysis of Gasoline and Natural Gas Fuelled Vehicles

Directory of Open Access Journals (Sweden)

Charalambos Chasos

2014-03-01

Full Text Available There is recent interest for the utilisation of natural gas for empowering the internal combustion engines (ICE of vehicles. The production of novel natural gas ICE for vehicles, as well as the conversion of existing gasoline fuelled ICE of vehicles to natural gas fuelled ICE are new technologies which require to be analysed and assessed. The objective of the present study is to examine the adaptation of natural gas as vehicle fuel and carry out a technical analysis and an economical feasibility analysis of the two types of ICE vehicles, namely gasoline and natural gas fuelled vehicles. The technical model uses the physical properties of the two fuels and the performance factors of internal combustion engines including brake thermal efficiency. The resulting exhaust gas emissions are also estimated by the technical model using combustion calculations which provide the expected levels of exhaust gas emissions. Based on the analysis with the technical model, comparisons of the two types of engines are performed. Furthermore, the estimated performance characteristics of the two types of engines, along with local statistical data on annual fuel imports and annual fuel consumption for transportation and data on the vehicles fleet for the case study of Cyprus are used as input in the economical model. For the base year 2013, data of natural gas price is also used in the economical model. The economical model estimates the capital cost, the carbon dioxide emissions avoidance of fines, the net present value and the internal rate of return of the investment of large scale adaptation of natural gas fuelled vehicles for the case study. From the results and comparisons, conclusions are drawn and recommendations are provided for the adaptation of natural gas vehicles which can provide improved performance with reduced pollutant emissions.

The Reliability of Technical and Tactical Tagging Analysis Conducted by a Semi-Automatic VTS in Soccer.

Science.gov (United States)

Beato, Marco; Jamil, Mikael; Devereux, Gavin

2018-06-01

The Video Tracking multiple cameras system (VTS) is a technology that records two-dimensional position data (x and y) at high sampling rates (over 25 Hz). The VTS is of great interest because it can record external load variables as well as collect technical and tactical parameters. Performance analysis is mainly focused on physical demands, yet less attention has been afforded to technical and tactical factors. Digital.Stadium® VTS is a performance analysis device widely used at national and international levels (i.e. Italian Serie A, Euro 2016) and the reliability evaluation of its technical tagging analysis (e.g. shots, passes, assists, set pieces) could be paramount for its application at elite level competitions, as well as in research studies. Two professional soccer teams, with 30 male players (age 23 ± 5 years, body mass 78.3 ± 6.9 kg, body height 1.81 ± 0.06 m), were monitored in the 2016 season during a friendly match and data analysis was performed immediately after the game ended. This process was then replicated a week later (4 operators conducted the data analysis in each week). This study reports a near perfect relationship between Match and its Replication. R2 coefficients (relationships between Match and Replication) were highly significant for each of the technical variables considered (p technical tagging data accurately.

Surface Fire Hazards Analysis Technical Report-Constructor Facilities

International Nuclear Information System (INIS)

Flye, R.E.

2000-01-01

The purpose of this Fire Hazards Analysis Technical Report (hereinafter referred to as Technical Report) is to assess the risk from fire within individual fire areas to ascertain whether the U.S. Department of Energy (DOE) fire safety objectives are met. The objectives identified in DOE Order 420.1, Change 2, Facility Safety, Section 4.2, establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: The occurrence of a fire or related event; A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees, the public, or the environment; Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards; Property losses from a fire and related events exceeding defined limits established by DOE; and Critical process controls and safety class systems being damaged as a result of a fire and related events

Technical Work Plan For: Meteorological Monitoring and Data Analysis

International Nuclear Information System (INIS)

C.T. Bastian

2003-01-01

The meteorological monitoring and analysis program has three overall objectives. First, the program will acquire qualified meteorological data from monitoring activities in the Environmental Safety and Health (ES and H) network, including appropriate controls on measuring and test equipment. All work will be completed in accordance with U.S. Department of Energy (DOE) Office of Repository Development (ORD) administrative procedures and Bechtel SAIC Co., LLC (BSC) line procedures. The continuously operating monitoring program includes measuring and test equipment calibrations, operational checks, preventive and corrective maintenance, and data collection. Second, the program will process the raw monitoring data collected in the field and submit technically reviewed, traceable data to the Technical Data Management System (TDMS) and the Records Processing Center. Third, reports containing analyses or calculations could be created to provide information to data requesters

Assessing the Possibility of Implementing Tools of Technical Analysys for Real Estate Market Analysis

Directory of Open Access Journals (Sweden)

Brzezicka Justyna

2016-06-01

Full Text Available Technical analysis (TA and its different aspects are widely used to study the capital market. In the traditional approach, this analysis is used to determine the probability of changes in current rates on the basis of their past changes, accounting for factors which had, have or may have an influence on shaping the supply and demand of a given asset. In the practical sense, TA is a set of techniques used for assessing the value of an asset based on the analysis of the asset's trajectories as well as statistical tools.

Citation analysis of Computer Standards & Interfaces: Technical or also non-technical focus?

NARCIS (Netherlands)

G. van de Kaa (Geerten); H.J. de Vries (Henk); B. Baskaran (Balakumaran)

2015-01-01

textabstractThis paper analyzes to which extent research published in Computer Standards & Interfaces (CSI) has a technical focus. We find that CSI has been following its scope very closely in the last three years and that the majority of its publications have a technical focus. Articles published

Technical-tactical analysis of capoeira game: contributions to think the teach-learning-training metodology

Directory of Open Access Journals (Sweden)

Vinícius Thiago De Melo

2015-05-01

Full Text Available This article presented a critical analysis on the internal structure of capoeira game. This research took place from empirical observation and literature review. The analysis focused on the technical and tactical aspects of the game, relating concepts and principles of sports pedagogy to capoeira specifically. It was noted that the game of capoeira can be classified as sociomotor/collective, however, this has presented variations, and can also be classified as psychomotor/individual. Through the analysis of the capoeira game performed in that article was verified that hardly a single teaching method would address all the technical and tactical elements involved in this activity. Therefore, was detach the importance of using multiples methods of teaching-learning-training, which might facilitate the rescue of the capoeira game from their historical-cultural foundations, which is characterized by "mandinga", "malice", in other words, a technical-tactical game which involves unpredictability, strategies, improvisation, creativity and decision-making.

On the Use of Student Data in Efficiency Analysis--Technical Efficiency in Swedish Upper Secondary School

Science.gov (United States)

Waldo, Staffan

2007-01-01

While individual data form the base for much empirical analysis in education, this is not the case for analysis of technical efficiency. In this paper, efficiency is estimated using individual data which is then aggregated to larger groups of students. Using an individual approach to technical efficiency makes it possible to carry out studies on a…

Accident Damage Analysis Module (ADAM) – Technical Guidance, Software tool for Consequence Analysis calculations

OpenAIRE

FABBRI LUCIANO; BINDA MASSIMO; BRUINEN DE BRUIN YURI

2017-01-01

This report provides a technical description of the modelling and assumptions of the Accident Damage Analysis Module (ADAM) software application, which has been recently developed by the Joint Research Centre (JRC) of the European Commission (EC) to assess physical effects of an industrial accident resulting from an unintended release of a dangerous substance

Technical-tactical analysis of youth olympic taekwondo combat.

Science.gov (United States)

Tornello, Francesco; Capranica, Laura; Minganti, Carlo; Chiodo, Salvatore; Condello, Giancarlo; Tessitore, Antonio

2014-04-01

The purpose of this study was to define the technical and tactical profiles of official youth taekwondo competitions played under the most recent rules of the International Taekwondo Federation. Tactical actions (i.e., attack, defense, and block), technical executions (from 1- to 4-point scores), kicking legs (i.e., front/rear and right/left), and overall technical effectiveness were investigated in relation to match outcome of semifinal and final competitions (n = 50) of youth (aged 13-14 years) black belt athletes during the Italian Taekwondo Cadet Championship. Differences (p technical exchanges showed differences (p technical executions. Winners resulted more efficient (p technical and tactical variables. In general, these findings showed that Cadets tend to adopt an offensive strategy. In considering that the adoption of the new electronic system requires athletes to execute correct technical actions to have a score assigned, coaches should emphasize the effectiveness of scoring techniques and help athletes to effectively improve their defense and counterattack capabilities.

The Profitability of the Strategy Linking Fundamental, Portfolio and Technical Analysis on the Polish Capital Market

Directory of Open Access Journals (Sweden)

Flotyński Marcin

2016-12-01

Full Text Available In the article, several methods of taking investment decisions are described: a fundamental, portfolio, and technical analysis. They constitute different approaches which are convenient for different types of investors with various expectations and time horizons of their investments. The simultaneous combination of these three analyses is not popular. The aim of this study is to test the effectiveness of simultaneous use of a fundamental analysis, portfolio analysis, and technical analysis for shares quoted on the Warsaw Stock Exchange (WSE in 2000–2007. The research hypothesis is advanced that the concurrent-linked application of a fundamental, portfolio, and technical analysis brings better results than the separate use of these analyses. Models of capital market, such as CAPM and APT, have been used, as well as P/E ratio, Return on Equity (RoE, Relative Strength Index (RSI, and Exponential Moving Average (EMA. The combination of a financial analysis, technical indicators, and models of the capital market in order to invest on the stock exchange is author’s own method. In general, the survey has been carried out on the grounds of quantitative methods (financial analysis, regression model, and multi regression model and a comparative analysis. The results of the research have been used to create diversified portfolios on the WSE. It occurs that the concurrent use of the three analyses brings the highest rate of return of a portfolio.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

Science.gov (United States)

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.

Technical feasibility of the implementing of the paper analysis in forensic documentoscopy

International Nuclear Information System (INIS)

Perez Alfaro, Cesar Alonso

2013-01-01

Technical feasibility has determined the implementation of the paper analysis in forensic documentoscopy. Methods of non-destructive and destructive testing are focused in the study. The dimensions, thickness, opacity, brightness and air permeability are analyzed by the methods of non-destructive testing. The analysis of pH, fiber, humidity and ashes are performed by destructive methods. 10 samples of paper type 'Bond' are examined of the main importers from country. The chemical and anatomy of the wood are explained. The results of the non-destructive methods have achieved to differentiate 8 of the 10 samples studied. The two remaining samples have achieved to differentiate by the fibers analysis and ashes analysis. The pH has determined in the 10 samples that the pulping method has been basic. The technical differentiation of the 'Bond' paper has been possible for use in forensic documentoscopy. The fibers present in the paper are observed applying the dye 'Graff C' and using the microscope. The dye method 'Graff C' has allowed a morphologic differentiation of the organic composition of the sample of paper [es

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Matsuo, Yukinori, E-mail: ymatsuo@kuhp.kyoto-u.ac.jp; Nakamura, Mitsuhiro; Mizowaki, Takashi; Hiraoka, Masahiro [Department of Radiation Oncology and Image-applied Therapy, Kyoto University, 54 Shogoin-Kawaharacho, Sakyo, Kyoto 606-8507 (Japan)

2016-09-15

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiple causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

International Nuclear Information System (INIS)

Matsuo, Yukinori; Nakamura, Mitsuhiro; Mizowaki, Takashi; Hiraoka, Masahiro

2016-01-01

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiple causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.

Technical/economical analysis of bioenergy systems

International Nuclear Information System (INIS)

Solantausta, Y.

1998-01-01

The objectives of the IEA Bioenergy Technoeconomic Analysis Activity are: (1) To promote development of thermochemical biomass conversion methods by carrying out selected site specific feasibility studies in participating countries. Both agricultural and woody biomasses will be converted either into electricity or boiler fuels; (2) To compare advanced technologies to commercial alternatives based on technoeconomic basis to establish future development needs, and (3) To facilitate information exchange between participants on relevant basic process issues. Five countries (Finland, Canada, USA, Norway, Austria) are participating to the Activity. Initially two feasibility studies are planned for each country. Each study has three common elements: site specific, technical, and economic data. The site specific cases are described below in short. Products in the cases are electricity, heat and fuel oil. Total of two cases per country are planned. (orig.)

Energy. Application of solar energy in dwellings: A technical and economical analysis for the European community

Science.gov (United States)

1980-03-01

The technical possibilities and economical limitations of solar heating systems for the application in swimming pools, hot water preparation, space heating and air conditioning were investigated. This analysis was performed for dwellings with special consideration of the climatic differences in each community. The computer program, which was used for solar system calculations, and all mathematical models, for technical and economical analysis were elucidated. In the technical and economical analysis, the most suitable solar system sizes for each community was determined. Four types of solar collectors were investigated. The single glass selective collector proved to be the most cost effective collector in all the above applications, provided the the additional cost for the selective coating is not more than 20DM/cu. From the results of the analysis certain recommendations were derived, which can improve the rapid implementation of solar heating systems into the market.

MARKOWITZ' MODEL WITH FUNDAMENTAL AND TECHNICAL ANALYSIS – COMPLEMENTARY METHODS OR NOT

Directory of Open Access Journals (Sweden)

Branka Marasović

2011-02-01

Full Text Available As it is well known there are few “starting points” in portfolio optimization process, i.e. in the stock selection process. Famous Markowitz’ optimization model is unavoidable in this job. On the other side, someone may say that the indicators of the fundamental analysis must be the starting point. Beside that, the suggestions of the technical analysis must be taken into consideration. There are really numerous studies of the each approach separately, but it is almost impossible to find researches combining these approaches in logic and efficient unity. The main task of the paper is to find out if these approaches are complementary and if they are, how to apply them as efficient unit process. The empirical part of the study uses share sample from the Croatian stock market. Beside Markowitz’ MV model, fundamental and technical analysis, big role in the paper has an original multi-criterion approach.

How a submarine returns to periscope depth: analysing complex socio-technical systems using Cognitive Work Analysis.

Science.gov (United States)

Stanton, Neville A; Bessell, Kevin

2014-01-01

This paper presents the application of Cognitive Work Analysis to the description of the functions, situations, activities, decisions, strategies, and competencies of a Trafalgar class submarine when performing the function of returning to periscope depth. All five phases of Cognitive Work Analysis are presented, namely: Work Domain Analysis, Control Task Analysis, Strategies Analysis, Social Organisation and Cooperation Analysis, and Worker Competencies Analysis. Complex socio-technical systems are difficult to analyse but Cognitive Work Analysis offers an integrated way of analysing complex systems with the core of functional means-ends analysis underlying all of the other representations. The joined-up analysis offers a coherent framework for understanding how socio-technical systems work. Data were collected through observation and interviews at different sites across the UK. The resultant representations present a statement of how the work domain and current activities are configured in this complex socio-technical system. This is intended to provide a baseline, from which all future conceptions of the domain may be compared. The strength of the analysis is in the multiple representations from which the constraints acting on the work may be analysed. Future research needs to challenge the assumptions behind these constraints in order to develop new ways of working. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Silicon on ferroelectic insulator field effect transistor (SOF-FET) a new device for the next generation ultra low power circuits

Science.gov (United States)

Es-Sakhi, Azzedin D.

concept of negative capacitance. The new field effect transistor (FET) based on ferroelectric insulator named Silicon-On-Ferroelectric Insulator Field Effect Transistor (SOF-FET). This proposal is a promising methodology for future ultra-low-power applications, because it demonstrates the ability to replace the silicon-bulk based MOSFET, and offers subthreshold swing significantly lower than 60mV/decade and reduced threshold voltage to form a conducting channel. The SOF-FET can also solve the issue of junction leakage (due to the presence of unipolar junction between the top plate of the negative capacitance and the diffused areas that form the transistor source and drain). In this device the charge hungry ferroelectric film already limits the leakage.

Imagining Technicities

DEFF Research Database (Denmark)

Liboriussen, Bjarke; Plesner, Ursula

2011-01-01

to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

Socio-technical Betwixtness

DEFF Research Database (Denmark)

Bossen, Claus

2017-01-01

the intrinsically social and technical interwovenness of design, and the necessity of including affected people and stakeholders in the design process. This betwixtness of socio-technical design is demonstrated by the analysis of two IT systems for healthcare: a foundational model for electronic healthcare records......This chapter focusses on two challenges for socio-technical design: Having to choose between different rationales for design, and the adequate understanding and depiction of the work to be redesigned. These two challenges betwixt the otherwise strong tenets of socio-technical design of pointing out......, and an IT system organizing hospital porters’ work. The conceptual background for the analysis of the cases is provided by a short introduction to different rationales for organizational design, and by pointing to the differences between a linear, rationalistic versus an interactional depiction of work....

Analysis of Physiological, Technical, and Tactical Analysis during a Friendly Football Match of Elite U19.

Science.gov (United States)

Ortega, Juan Ignacio; Evangelio, Carlos; Clemente, Filipe Manuel; Martins, Fernando Manuel Lourenço; González-Víllora, Sixto

2016-06-16

The main objective was to analyze a friendly match of youth elite soccer players identifying the variance of tactical and physiological response parameters during the game. In addition, detecting the impact of both halves on player performance. For the purposes of this study twenty-two U19 players were analyzed playing 11v11. Activity profile, heart rate (HR and HRmax), grouped in five different zones were analyzed via Bluetooth technology, technical performance was analyzed by the Team Sport Assessment Procedure (TSAP), and tactical performance was measured by Social Network Analysis. A comparison of heart rate responses showed significant main effects in the halves (p = 0.001; η p 2 = 0.623). A comparison between tactical position and technical performance had significant main effects (p = 0.001; η p 2 = 0.390). Tactical position showed statistically significant effects on tactical prominence (p = 0.002; η p 2 = 0.296). Therefore, fatigue is a component distinguished in technical/tactical parameters, such as volume of play and efficiency index. Results suggest that fatigue effects may constrain technical performance and, for that reason, the use of instruments to monitor the fatigue effect during matches may be suggested.

Analysis of Physiological, Technical, and Tactical Analysis during a Friendly Football Match of Elite U19

Directory of Open Access Journals (Sweden)

Juan Ignacio Ortega

2016-06-01

Full Text Available The main objective was to analyze a friendly match of youth elite soccer players identifying the variance of tactical and physiological response parameters during the game. In addition, detecting the impact of both halves on player performance. For the purposes of this study twenty-two U19 players were analyzed playing 11v11. Activity profile, heart rate (HR and HRmax, grouped in five different zones were analyzed via Bluetooth technology, technical performance was analyzed by the Team Sport Assessment Procedure (TSAP, and tactical performance was measured by Social Network Analysis. A comparison of heart rate responses showed significant main effects in the halves (p = 0.001; η p 2 = 0.623. A comparison between tactical position and technical performance had significant main effects (p = 0.001; η p 2 = 0.390. Tactical position showed statistically significant effects on tactical prominence (p = 0.002; η p 2 = 0.296. Therefore, fatigue is a component distinguished in technical/tactical parameters, such as volume of play and efficiency index. Results suggest that fatigue effects may constrain technical performance and, for that reason, the use of instruments to monitor the fatigue effect during matches may be suggested.

#Indigenous: A Technical and Decolonial Analysis of Activist Uses of Hashtags Across Social Movements

Directory of Open Access Journals (Sweden)

Marisa Elena Duarte

2017-12-01

Full Text Available A mixed methods network analysis of the content, circulation, and amount of data Native American activists circulated through Twitter during the 2016 US presidential election reveals contours of the technical challenges and social and political boundaries shaping Native American political life. A comparison of the results with a mainstream American dataset reveals how tweets propagated by Native American rights activists are characteristically more likely to focus on life-and-death issues. Analysis of the findings from an Indigenous perspective opens possibilities for considering activist, scientific, experiential, technical, governmental, political, and metaphysical aspects of Indigenous Internet research.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

Science.gov (United States)

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

Airborne incidents : an econometric analysis of severity, December 31, 2014 : technical summary

Science.gov (United States)

2014-12-31

This is a technical summary of the Airborne Incidents: An Econometric Analysis of Severity main report. : Airborne loss of separation incidents occur when an aircraft breaches the defined separation limit (vertical and/or horizontal) with anoth...

The logic of Technical Standardisation

DEFF Research Database (Denmark)

Nedergaard, Peter

In this paper technical standardisation is understood and explained in a model where economic analysis is coupled with an analysis of the political system as proposed in rational choice theory. The aim is to answer both the question why various countries (e.g. the United States versus European...... countries) let either the market or public intervention determine the mode of technical standardisation and the possible implications of these two ways of organizing technical standardisation from an economic and a political point of view. Based upon the analysis of the paper a couple of general policy...... recommendations are made concerning the mode of technical standardisation....

The levels of monoamine neurotransmitters and measures of mental and emotional health in HCV patients treated with ledipasvir (LDV) and sofosbuvir (SOF) with or without ribavirin (RBV).

Science.gov (United States)

Golabi, Pegah; Elsheikh, Elzafir; Karrar, Azza; Estep, James M; Younossi, Issah; Stepanova, Maria; Gerber, Lynn; Younossi, Zobair M

2016-11-01

Mental and emotional health (MEH) impairment is commonly encountered in hepatitis C patients. Although the exact mechanism remains unknown, alterations in neurotransmitter and cytokine levels maybe associated with hepatitis C virus (HCV)-related MEH issues.The aim of the study was to assess association of serum biomarkers with self-reports of MEH in HCV patients before treatment and after achieving sustained virologic response (SVR).The HCV genotype-1-infected patients who achieved SVR at 12 weeks after treatment with ledipasvir (LDV)/sofosbuvir (SOF) ± ribavirin (RBV) were selected. Frozen serum samples from baseline, end of treatment (EOT), and posttreatment week 4 (PTW4) were used to assay 16 cytokines and monoamine neurotransmitters. Validated self-reports were used to assess MEH.Hundred patients were evaluated. Mean age was 53 years (57% male, 86% white). Compared with baseline, emotional well-being and emotional health significantly increased by EOT, and role emotional, emotional well-being, and emotional health significantly increased at PTW4 in the RBV-containing arm (P neurotransmitters and cytokines were found to be independent predictors of MEH scores in multiple regression analysis.Cytokine and neurotransmitter changes are associated with mental and emotional health. Patient-reported outcome scores change during and after treatment.

Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from time series observations using Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer and other instruments from MOORING_SOFS_142W_46S in the Indian Ocean from 2011-11-24 to 2012-09-24 (NODC Accession 0118546)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0118546 includes chemical, meteorological, physical and time series data collected from MOORING_SOFS_142W_46S in the Indian Ocean from 2011-11-24 to...

Pareto analysis of critical factors affecting technical institution evaluation

Directory of Open Access Journals (Sweden)

Victor Gambhir

2012-08-01

Full Text Available With the change of education policy in 1991, more and more technical institutions are being set up in India. Some of these institutions provide quality education, but others are merely concentrating on quantity. These stakeholders are in a state of confusion about decision to select the best institute for their higher educational studies. Although various agencies including print media provide ranking of these institutions every year, but their results are controversial and biased. In this paper, the authors have made an endeavor to find the critical factors for technical institution evaluation from literature survey. A Pareto analysis has also been performed to find the intensity of these critical factors in evaluation. This will not only help the stake holders in taking right decisions but will also help the management of institutions in benchmarking for identifying the most important critical areas to improve the existing system. This will in turn help Indian economy.

Identidad nacional y modelos femeninos en la obra de Paulo Diácono: la imagen de la Emperatriz Sofía

Directory of Open Access Journals (Sweden)

Dionisio PÉREZ SÁNCHEZ

2010-02-01

Full Text Available RESUMEN: En el presente trabajo se estudia la imagen negativa que el historiador lombardo Paulo Diácono ofrece de la emperatriz bizantina del siglo vi Sofía, visión relacionada tanto con su misoginia como con su clara concepción antibizantina. Sin embargo, aspectos característicos del ritual imperial bizantino, asociados a la figura de las emperatrices, son utilizados interesadamente por el religioso con la finalidad de realzar el importante papel jugado de hecho por las reinas y princesas lombardas, poniendo así de manifiesto contradicciones en el propio discurso del autor.ABSTRACT: This work studies the negative image of the 6th century Byzantine Empress Sophia given by the Lombard historian Paulus Diaconus, a view related both to his misogyny and to his clearly anti-Byzantine perspective. However, characteristic aspects of the Byzantine imperial ritual, associated with the figure of the empresses are used interestingly by this cleric, highlighting the important role that the Lombard queens and princesses indeed played, and thus revealing contradictions in the author's discourse.

Strategy of technical innovation

International Nuclear Information System (INIS)

Lee, Ga Jong

1990-12-01

This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

Benefit Analysis Report, United States Air Force Technical Order Management Systems (AFTOMS)

Science.gov (United States)

1989-08-01

This report prepared by the Transportation Systems Center (TSC) concludes an analysis of the Technical Order (TO) costs and benefits, which was originally undertaken as part of the US Air Force Computer-aided Acquisition and Logistics Support (CALS) ...

Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

Science.gov (United States)

Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

2016-06-01

Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p technical performance of laparoscopic rectal surgery.

A meta-analysis of motivational interviewing process: Technical, relational, and conditional process models of change.

Science.gov (United States)

Magill, Molly; Apodaca, Timothy R; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E F; Tonigan, J Scott; Moyers, Theresa

2018-02-01

In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3,025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Therapist MI-consistent skills were correlated with more client change talk (r = .55, p technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = -.16, p technical hypothesis path effect sizes was partially explained by inter- and intrapersonal moderators. This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Longitudinal Trend Analysis of Performance Indicators for South Carolina's Technical Colleges

Science.gov (United States)

Hossain, Mohammad Nurul

2010-01-01

This study included an analysis of the trend of performance indicators for the technical college sector of higher education in South Carolina. In response to demands for accountability and transparency in higher education, the state of South Carolina developed sector specific performance indicators to measure various educational outcomes for each…

Technical conservatism in the design and analysis of a nuclear-waste repository in basalt

International Nuclear Information System (INIS)

Jones, K.A.

1982-01-01

The US Department of Energy's National Waste Terminal Storage Program has adopted a policy of technical conservatism to guide the design and analysis of geologic disposal systems for commercial high-level radioactive waste. Technical conservatism serves as the programmatic philosophy for managing uncertainty in the performance of the disposal system. The implementation of technical conservatism as applied to a nuclear waste repository in basalt is discussed. Preliminary assessments of the performance of the waste package, repository, and site subsystems are compared to key proposed regulatory criteria. The comparison shows that there are substantial safety margins in the predicted performance of the nuclear waste repository in basalt

A Socio-Technical Analysis of Patient Accessible Electronic Health Records.

Science.gov (United States)

Hägglund, Maria; Scandurra, Isabella

2017-01-01

In Sweden, and internationally, there is a movement towards increased transparency in healthcare including giving patients online access to their electronic health records (EHR). The purpose of this paper is to analyze the Swedish patient accessible EHR (PAEHR) service using a socio-technical framework, to increase the understanding of factors that influence the design, implementation, adoption and use of the service. Using the Sitting and Singh socio-technical framework as a basis for analyzing the Swedish PAEHR system and its context indicated that there are many stakeholders engaged in these types of services, with different driving forces and incentives that may influence the adoption and usefulness of PAEHR services. The analysis was useful in highlighting important areas that need to be further explored in evaluations of PAEHR services, and can act as a guide when planning evaluations of any PAEHR service.

Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

Science.gov (United States)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

Science.gov (United States)

Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

2013-12-01

Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

NAEP 1999 Long-Term Trend Technical Analysis Report: Three Decades of Student Performance. NCES 2005-484

Science.gov (United States)

Allen, Nancy L.; McClellan, Catherine A.; Stoeckel, Joan J.

2005-01-01

This report provides an update to the technical analysis procedures documenting the 1996 National Assessment of Educational Progress (NAEP) as presented in "The NAEP 1996 Technical Report" (Allen, Carlson, and Zelenak, 1999). It describes how the 1999 long-term trend data were incorporated into the trend analyses. Since no national main…

Technical efficiency of women's health prevention programs in Bucaramanga, Colombia: a four-stage analysis.

Science.gov (United States)

Ruiz-Rodriguez, Myriam; Rodriguez-Villamizar, Laura A; Heredia-Pi, Ileana

2016-10-13

Primary Health Care (PHC) is an efficient strategy to improve health outcomes in populations. Nevertheless, studies of technical efficiency in health care have focused on hospitals, with very little on primary health care centers. The objective of the present study was to use the Data Envelopment Analysis to estimate the technical efficiency of three women's health promotion and disease prevention programs offered by primary care centers in Bucaramanga, Colombia. Efficiency was measured using a four-stage data envelopment analysis with a series of Tobit regressions to account for the effect of quality outcomes and context variables. Input/output information was collected from the institutions' records, chart reviews and personal interviews. Information about contextual variables was obtained from databases from the primary health program in the municipality. A jackknife analysis was used to assess the robustness of the results. The analysis was based on data from 21 public primary health care centers. The average efficiency scores, after adjusting for quality and context, were 92.4 %, 97.5 % and 86.2 % for the antenatal care (ANC), early detection of cervical cancer (EDCC) and family planning (FP) programs, respectively. On each program, 12 of the 21 (57.1 %) health centers were found to be technically efficient; having had the best-practice frontiers. Adjusting for context variables changed the scores and reference rankings of the three programs offered by the health centers. The performance of the women's health prevention programs offered by the centers was found to be heterogeneous. Adjusting for context and health care quality variables had a significant effect on the technical efficiency scores and ranking. The results can serve as a guide to strengthen management and organizational and planning processes related to local primary care services operating within a market-based model such as the one in Colombia.

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

Science.gov (United States)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

Hanford Site Composite Analysis Technical Approach Description: Groundwater Pathway Dose Calculation.

Energy Technology Data Exchange (ETDEWEB)

Morgans, D. L. [CH2M Hill Plateau Remediation Company, Richland, WA (United States); Lindberg, S. L. [Intera Inc., Austin, TX (United States)

2017-09-20

The purpose of this technical approach document (TAD) is to document the assumptions, equations, and methods used to perform the groundwater pathway radiological dose calculations for the revised Hanford Site Composite Analysis (CA). DOE M 435.1-1, states, “The composite analysis results shall be used for planning, radiation protection activities, and future use commitments to minimize the likelihood that current low-level waste disposal activities will result in the need for future corrective or remedial actions to adequately protect the public and the environment.”

Integrated corridor management initiative : demonstration phase evaluation - Dallas technical capability analysis test plan.

Science.gov (United States)

This report presents the test plan for conducting the Technical Capability Analysis for the United States : Department of Transportation (U.S. DOT) evaluation of the Dallas U.S. 75 Integrated Corridor : Management (ICM) Initiative Demonstration. The ...

Analysis of Rotary Aircraft Alternatives for NATO SOF Organic Air Wing

Science.gov (United States)

2012-06-01

analysis with an assumed program start in 2013 and an end in 2019 to determine the impact of short program duration on platform selection. D...FY12 GO\\ LR,~itl\\ l Sli LABOR H13 (J()VI R\\\\iFI\\TSE I AROR FY14 GOVLR\\\\iLI\\ I Sl:. LABOR H15 SI:.PO CSS FY II SII’O CSS FY 12 SEI’() CSS fY 13

Technical Performance Analysis of Iran Premier League Soccer Players in 2012-2013 Season

Directory of Open Access Journals (Sweden)

Javani Mohsen

2015-10-01

Full Text Available Background and purpose of study : analysis of IRAN premier league soccer players’ technical performance in season 2012-2013, using a computerized match analysis system (Borhan Mobin Development Management Co, IRAN. Material and methods: in this study, data were obtained from 120 players, who performed in competitions 90 minutes. The players were classified into 3 positional roles: defenders, midfielders and forwards. Technical performance variables analysis included: total passes, total successful passes, pass accuracy, total shots; total shots to target, shot accuracy, ball interception and ball losses. The data were statistically analyzed by one-way ANOVA, Kruskal-Wallis, Mann-Whitney U and Tukey post hoc test. Results : The findings of this study showed that players performed about 45 passes per competition. Midfielders and defenders had significantly higher number of passes than forwards. Pass accuracy was about 67% and there were no significant differences between positional roles. Also, the players performed about 0.8 shots per competition, forwards and midfielders had significantly higher number of shots than defenders. Shot accuracy was about 31%; midfielders and forwards had significantly higher shot accuracy than defenders. Forwards showed significantly lower ball interception and higher ball losses than other positions. Conclusion : The result of this study showed that there were significant differences between some technical actions in positional roles. Therefore, coaches can use this information for individualization of training according to playing positions and for optimization of training in the amateur game.

Identification of the Key Fields and Their Key Technical Points of Oncology by Patent Analysis.

Science.gov (United States)

Zhang, Ting; Chen, Juan; Jia, Xiaofeng

2015-01-01

This paper aims to identify the key fields and their key technical points of oncology by patent analysis. Patents of oncology applied from 2006 to 2012 were searched in the Thomson Innovation database. The key fields and their key technical points were determined by analyzing the Derwent Classification (DC) and the International Patent Classification (IPC), respectively. Patent applications in the top ten DC occupied 80% of all the patent applications of oncology, which were the ten fields of oncology to be analyzed. The number of patent applications in these ten fields of oncology was standardized based on patent applications of oncology from 2006 to 2012. For each field, standardization was conducted separately for each of the seven years (2006-2012) and the mean of the seven standardized values was calculated to reflect the relative amount of patent applications in that field; meanwhile, regression analysis using time (year) and the standardized values of patent applications in seven years (2006-2012) was conducted so as to evaluate the trend of patent applications in each field. Two-dimensional quadrant analysis, together with the professional knowledge of oncology, was taken into consideration in determining the key fields of oncology. The fields located in the quadrant with high relative amount or increasing trend of patent applications are identified as key ones. By using the same method, the key technical points in each key field were identified. Altogether 116,820 patents of oncology applied from 2006 to 2012 were retrieved, and four key fields with twenty-nine key technical points were identified, including "natural products and polymers" with nine key technical points, "fermentation industry" with twelve ones, "electrical medical equipment" with four ones, and "diagnosis, surgery" with four ones. The results of this study could provide guidance on the development direction of oncology, and also help researchers broaden innovative ideas and discover new

Analysis Of Human Capital Development In Technical Colleges In ...

African Journals Online (AJOL)

The study assessed the human capital development in Technical Colleges in Imo State of Nigeria. All the Technical Colleges in the State participated in the study. Results showed low enrollment in the Colleges. There was gender inequity in the enrollment as only 59 females (1.97%) enrolled in the Technical Colleges.

CALS Baseline Architecture Analysis of Weapons System. Technical Information: Army, Draft. Volume 8

Science.gov (United States)

1989-09-01

This effort was performed to provide a common framework for analysis and planning of CALS initiatives across the military services, leading eventually to the development of a common DoD-wide architecture for CALS. This study addresses Army technical ...

Modeling technical efficiency of inshore fishery using data envelopment analysis

Science.gov (United States)

Rahman, Rahayu; Zahid, Zalina; Khairi, Siti Shaliza Mohd; Hussin, Siti Aida Sheikh

2016-10-01

Fishery industry contributes significantly to the economy of Malaysia. This study utilized Data Envelopment Analysis application in estimating the technical efficiency of fishery in Terengganu, a state on the eastern coast of Peninsular Malaysia, based on multiple output, i.e. total fish landing and income of fishermen with six inputs, i.e. engine power, vessel size, number of trips, number of workers, cost and operation distance. The data were collected by survey conducted between November and December 2014. The decision making units (DMUs) involved 100 fishermen from 10 fishery areas. The result showed that the technical efficiency in Season I (dry season) and Season II (rainy season) were 90.2% and 66.7% respectively. About 27% of the fishermen were rated to be efficient during Season I, meanwhile only 13% of the fishermen achieved full efficiency 100% during Season II. The results also found out that there was a significance difference in the efficiency performance between the fishery areas.

49 CFR 552.6 - Technical review.

Science.gov (United States)

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with...

Formal Modelling and Analysis of Socio-Technical Systems

NARCIS (Netherlands)

Probst, Christian W.; Kammüller, Florian; Rydhof Hansen, René; Probst, Christian W.; Hankin, Chris; Rydhof Hansen, René

2015-01-01

Attacks on systems and organisations increasingly exploit human actors, for example through social engineering. This non-technical aspect of attacks complicates their formal treatment and automatic identification. Formalisation of human behaviour is difficult at best, and attacks on socio-technical

Cost-effectiveness analysis of ledipasvir/sofosbuvir in patients with chronic hepatitis C: Treatment of patients with absence or mild fibrosis compared to patients with advanced fibrosis.

Science.gov (United States)

Buti, M; Domínguez-Hernández, R; Oyagüez, I; Casado, M A; Esteban, R

2017-09-01

To evaluate the cost-effectiveness of ledipasvir/sofosbuvir (LDV/SOF) in treatment-naïve patients with chronic hepatitis C (CHC) genotype 1 (GT1) in the absence or mild fibrosis (F0-F1) versus advanced fibrosis (F2-F4), from the perspective of the Spanish Health System. A Markov model was developed to simulate disease progression, estimating costs and outcomes [life years gained (LYG) and quality-adjusted life years (QALY)] derived from starting with LDV/SOF in patients with F0-F1 compared with F2-F4. Therapy duration was 8 weeks in noncirrhotic patients with viral load rates were obtained from real-world cohort studies. Transition probabilities, utilities and direct costs were obtained from the literature. A 3% annual discount rate was applied to costs and outcomes. Sensitivity analyses were performed. LDV/SOF in F0-F1 patients was a dominant strategy, being more effective (19.85 LYG and 19.80 QALY) than beginning treatment in F2-F4 patients (18.63 LYG and 16.25 QALY), generating savings of €9228 per patient (€3661 due to disease management and monitoring). In a cohort of 1000 patients, LDV/SOF in F0-F1 patients decreased the number of cases of decompensated cirrhosis (93%), hepatocellular carcinoma (97%) and liver-related deaths (95%) and prevented 6 liver transplants compared to initiating LDV/SOF in F2-F4 patients. In CHC treatment-naïve GT1 patients, starting treatment with LDV/SOF in patients with F0-F1 compared to those with F2-F4 increases effectiveness by 1.22 LYG and 3.55 QALY gained and reduces disease burden and it is associated with cost savings. © 2017 John Wiley & Sons Ltd.

DISPOWER. A socio-economic analysis of technical solutions and practices for the integration of distributed generation

International Nuclear Information System (INIS)

Ten Donkelaar, M.; Scheepers, M.J.J.

2004-07-01

Socio-economic impacts of technical solutions and approaches that are being developed for the integration of distributed generation (DG) in electricity distribution systems are analyzed. For this analysis an inventory was made of technical options, solutions and approaches on the basis of a questionnaire that has been distributed among DG (technical) experts. The questionnaire was not meant to give an exhaustive overview, but to gain insight in the possible technical solutions, options and approaches and the economic interactions between different actors in the electricity market. The different technical options and solutions have been divided into four main categories. Four technologies, one of each category, have been studied in more detail to analyse their impact on the financial relationships between the actors in the distribution network. The four technologies are: wind power prediction tool (planning tool), grid control unit (power quality device), power operation and power quality management system (ICT device), and power storage device. To assess the impact of the investments in the proposed technologies on all actors involved (and different from the actor investing), an assessment tool has been developed to qualitatively identify the economic impacts of a number of these options. This assessment tool takes into account the financial transactions between the parties on the distribution network. The analysis also discusses the allocation of the economic value of certain benefits through contracts and economic network regulation

Exploring the relationship between anaesthesiologists' non-technical and technical skills

DEFF Research Database (Denmark)

Gjeraa, K; Jepsen, R M H G; Rewers, M

2016-01-01

BACKGROUND: A combination of non-technical skills (NTS) and technical skills (TS) is crucial for anaesthetic patient management. However, a deeper understanding of the relationship between these two skills remains to be explored. We investigated the characteristics of trainee anaesthesiologists...... the customised version of the Anaesthetists' Non-Technical Skills System, ANTSdk, and an adapted TS checklist for calculating the correlation between NTS and TS. Written descriptions of the observed NTS were analysed using directed content analysis. RESULTS: The correlation between the NTS and the TS ratings......, concrete NTS were developed to aid the understanding, training and use of NTS....

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

Science.gov (United States)

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

Reduce the risk of stock trading by using technical analysis in iran's ...

African Journals Online (AJOL)

Reduce the risk of stock trading by using technical analysis in iran's stock market. ... In this research, efficiency of 50 active companies of Tehran Stock ... With this observation, this research suggest forming a portfolio with zero cost by purchasing ... FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

ANALYSIS OF EXISTING AND PROSPECTIVE TECHNICAL CONTROL SYSTEMS OF NUMERIC CODES AUTOMATIC BLOCKING

Directory of Open Access Journals (Sweden)

A. M. Beznarytnyy

2013-09-01

Full Text Available Purpose. To identify the characteristic features of the engineering control measures system of automatic block of numeric code, identifying their advantages and disadvantages, to analyze the possibility of their use in the problems of diagnosing status of the devices automatic block and setting targets for the development of new diagnostic systems. Methodology. In order to achieve targets the objective theoretical and analytical method and the method of functional analysis have been used. Findings. The analysis of existing and future facilities of the remote control and diagnostics automatic block devices had shown that the existing systems of diagnosis were not sufficiently informative, designed primarily to control the discrete parameters, which in turn did not allow them to construct a decision support subsystem. In developing of new systems of technical diagnostics it was proposed to use the principle of centralized distributed processing of diagnostic data, to include a subsystem support decision-making in to the diagnostics system, it will reduce the amount of work to maintain the devices blocking and reduce recovery time after the occurrence injury. Originality. As a result, the currently existing engineering controls facilities of automatic block can not provide a full assessment of the state distillation alarms and locks. Criteria for the development of new systems of technical diagnostics with increasing amounts of diagnostic information and its automatic analysis were proposed. Practical value. These results of the analysis can be used in practice in order to select the technical control of automatic block devices, as well as the further development of diagnostic systems automatic block that allows for a gradual transition from a planned preventive maintenance service model to the actual state of the monitored devices.

Evaluation of Technical Efficiency in Indian Sugar Industry: An Application of Full Cumulative Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Sunil KUMAR

2012-05-01

Full Text Available This study focuses on the inter-temporal and inter-state variations in technical and scale efficiency levels of Indian sugar industry. In the first stage, full cumulative data envelopment analysis (FCDEA is used to derive efficiency scores for 12 major sugar producing states. The panel data truncated regression is employed in the second stage to assess the key factors explaining the observed variations in the efficiency levels. The results suggest that the extent of technical inefficiency in Indian sugar industry is about 35.5 percent per annum, and the observed technical inefficiency stems primarily due to managerial inefficiency rather scale inefficiency. Also, a precipitous decline in the level of technical efficiency has been noticed in the postreforms period relative to the level observed in the pre-reforms period. The availability of skilled labour and profitability have been found to be most significant determinants of technical efficiency in Indian sugar industry.

Integrated corridor management initiative : demonstration phase evaluation, San Diego technical capability analysis test plan.

Science.gov (United States)

2012-08-01

This report presents the test plan for conducting the Technical Capability Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the San Diego Integrated Corridor Management (ICM) Initiative Demonstration. The ICM proje...

Technical efficiency of Spanish electrical sector: analysis of 1998-2001 period

International Nuclear Information System (INIS)

Gutierrez Moya, E.; Arevalo Quijada, M. T.

2007-01-01

The aim of this article is to analyse the technical efficiency of the energy Spanish sector in the course of the stage of liberalization (1998-2001). The study uses the non parametric approach of DEA (Data Envelopment Analysis) to derive Malaquist productivity indexes. In the study there is revealed the improvement of productivity of the mentioned companies, as well as the major differentiation between electrical considered companies. (Author) 23 refs

Meta-analysis of the technical performance of an imaging procedure: guidelines and statistical methodology.

Science.gov (United States)

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2015-02-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test-retest repeatability data for illustrative purposes. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Accounting for technical noise in differential expression analysis of single-cell RNA sequencing data.

Science.gov (United States)

Jia, Cheng; Hu, Yu; Kelly, Derek; Kim, Junhyong; Li, Mingyao; Zhang, Nancy R

2017-11-02

Recent technological breakthroughs have made it possible to measure RNA expression at the single-cell level, thus paving the way for exploring expression heterogeneity among individual cells. Current single-cell RNA sequencing (scRNA-seq) protocols are complex and introduce technical biases that vary across cells, which can bias downstream analysis without proper adjustment. To account for cell-to-cell technical differences, we propose a statistical framework, TASC (Toolkit for Analysis of Single Cell RNA-seq), an empirical Bayes approach to reliably model the cell-specific dropout rates and amplification bias by use of external RNA spike-ins. TASC incorporates the technical parameters, which reflect cell-to-cell batch effects, into a hierarchical mixture model to estimate the biological variance of a gene and detect differentially expressed genes. More importantly, TASC is able to adjust for covariates to further eliminate confounding that may originate from cell size and cell cycle differences. In simulation and real scRNA-seq data, TASC achieves accurate Type I error control and displays competitive sensitivity and improved robustness to batch effects in differential expression analysis, compared to existing methods. TASC is programmed to be computationally efficient, taking advantage of multi-threaded parallelization. We believe that TASC will provide a robust platform for researchers to leverage the power of scRNA-seq. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

A Socio-technical Mapping and Analysis of Dominant Design Materialization

DEFF Research Database (Denmark)

Christiansen, John K.; Varnes, Claus

the importance of high market shares for defining a wining dominating design, but despite the electric vehicle’s higher market share in the years 1899-1900 it was surpassed by the internal combustion vehicle. The socio-technical analysis departs from a narrative based on historical accounts on the competition...... between the electric vehicle and the internal combustion vehicle from late 1890 - until 1909. The analysis shows that the electric vehicle did not successfully attract new allies or overcome resistance from anti-programs to the same degree as the internal combustion vehicle. Findings suggest that some...... of the issues with few allies and anti-programs that emerged already during the late 1890'ties is still active in today's market and haunts the electric vehicle....

Comparative analysis of technical efficiency for different production culture systems and species of freshwater aquaculture in Peninsular Malaysia

Directory of Open Access Journals (Sweden)

Abdullahi Iliyasu

2016-05-01

Full Text Available This study estimated the bias-corrected technical efficiency (BCTE of different culture systems and species of freshwater aquaculture in Malaysia using bootstrapping data envelopment analysis (DEA. Data were collected from 307 respondents from three states in Peninsular Malaysia using a well-structured questionnaire as well as oral interviews. The findings indicate that all technical efficiency scores for all culture systems and species are below the optimal level (i.e. one. In addition, the results show that farmers’ experience, contact with extension workers and household size have a positive and statistically significant impact on technical efficiency. This implies that farmers who have long tenure in fish farming and also the opportunity to meet with extension workers are operating close to the production frontier (technically efficient. On the other hand, the age of the farmers has a negative and statistically significant impact on technical efficiency. Although educational level and farm status have a positive impact on technical efficiency, they are statistically insignificant. Furthermore, all the inputs used in the production process of different culture systems and species contained slacks and need to be reduced accordingly. Feed, the major input in fish production and constituting over half of the production costs, is equally over-utilized. Thus, the government, in collaboration with research institutes and universities, should design a feeding formula for fish depending on species, culture systems and stages of growth. This could help to reduce production costs, increasing the farmers' income, as well as providing much needed animal protein to consumers at an affordable rate. Keywords: Bootstrapping data envelopment analysis (DEA, Technical efficiency, Technical inefficiency, Freshwater aquaculture, Malaysia

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

Science.gov (United States)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

A technical analysis of the IAEA nuclear safeguards

International Nuclear Information System (INIS)

Yoon, J. W.

1998-01-01

In the post-Cold War era, the threats of horizontal nuclear proliferation emerge as the forefront security issue while the nuclear arms races among existing nuclear weapon states reduce to a remarkable extent. In this context, there arises lots of research attention to the IAEA nuclear safeguards which have been viewed as the core of international monitoring on the clandestine nuclear activities of potential proliferators. However, previous attention tended to highlight the political aspects of the IAEA nuclear safeguards, centering on the possibilities and limitations of the IAEA's inspection authority. In contrast, this paper purports to focus on the technical aspects of the IAEA nuclear safeguards, so it can show the intrinsic problems of those safeguards in stemming the proliferation of nuclear weapons. This paper mainly deals with the technical objectives and options of the IAEA nuclear safeguards, the technical indices of clandestine nuclear activities, and some measures to improve the efficacy of the IAEA nuclear safeguards. Hopefully, this paper is expected to lead us to approach the issue of the North Korean nuclear transparency from the technical perspective as well as the political one

Technical Efficiency Analysis of Container Terminals in the Middle Eastern Region

Directory of Open Access Journals (Sweden)

Ebrahim Sharaf Almawsheki

2015-12-01

Full Text Available Despite an increasing number of studies on the efficiency of container terminals, their focus has mostly been on advanced and emerging markets. There are limited studies on container terminals in developing countries such as those of the Middle Eastern region, which are located in a critical geographic position in the international maritime route between the East and the West. Information on their potential for development relative to other terminals worldwide is thus not readily available. This study aims to evaluate the technical efficiency of 19 container terminals in the Middle Eastern region. The DEA approach is used to measure technical efficiency, and slack variable analysis identifies potential areas of improvement for inefficient terminals. The results show that the Jebel Ali, Salalah and Beirut container terminals are the most efficient terminals in the region, and that the least efficient is the terminal in Aden. The results provide valuable information for terminal managers, helping to develop resource utilisation for steady development in operational efficiency.

Structural Analysis of Technical-Tactical Elements in Table Tennis and their Role in Different Playing Zones.

Science.gov (United States)

Munivrana, Goran; Petrinović, Lidija Zekan; Kondrič, Miran

2015-09-29

For the purpose of determining the overall structure of technical-tactical elements in table tennis and evaluating their role in different playing zones around the table, a new measuring instrument (a questionnaire) was formulated that took advantage of the expert knowledge of top, world class table tennis coaches. The results of the hierarchical taxonomic (cluster) analysis showed that the overall structure of the technical-tactical elements forming the table tennis technique could be divided into three basic groups; a group of technical-tactical elements (A) used in the phase of preparing one's own and disabling the opponent's attack; a group of technical-tactical elements (B) used in the phase of attack and counterattack; and a group of technical-tactical elements (C) used in the phase of defense. The differences among the obtained groups of table tennis elements were determined by applying the Kruskal-Wallis test, while relations between the groups and their role in different playing zones around the table were analyzed by comparing the average values of the experts' scores.

Structural Analysis of Technical-Tactical Elements in Table Tennis and their Role in Different Playing Zones

Directory of Open Access Journals (Sweden)

Munivrana Goran

2015-09-01

Full Text Available For the purpose of determining the overall structure of technical-tactical elements in table tennis and evaluating their role in different playing zones around the table, a new measuring instrument (a questionnaire was formulated that took advantage of the expert knowledge of top, world class table tennis coaches. The results of the hierarchical taxonomic (cluster analysis showed that the overall structure of the technical-tactical elements forming the table tennis technique could be divided into three basic groups; a group of technical-tactical elements (A used in the phase of preparing one’s own and disabling the opponent’s attack; a group of technical-tactical elements (B used in the phase of attack and counterattack; and a group of technical-tactical elements (C used in the phase of defense. The differences among the obtained groups of table tennis elements were determined by applying the Kruskal-Wallis test, while relations between the groups and their role in different playing zones around the table were analyzed by comparing the average values of the experts’ scores.

Medium Term Analysis of Technical and Allocative Efficiency in Romanian Farms Using FADN Dataset

Directory of Open Access Journals (Sweden)

Nicola GALLUZZO

2017-05-01

Full Text Available The Farm Accountancy Data Network is an annual survey proposed by the European Union in order to estimate the impact of the Common Agricultural Policy on farmers. Lots of scholars have investigated the technical, economical and allocative efficiency using a non parametric approach such as the Data Envelopment Analysis (DEA in Romanian farms throughout the Farm Accountancy Data Network dataset pointing out poor levels of technical efficiency, which were lower than the average European value. The purpose of this study was to assess using DEA approach technical, economic and allocative efficiency in Romanian farms part of the FADN dataset over six year time from 2007 to 2012. Findings pointed out an increase of technical efficiency compared to previous studies, as a consequence of a significant turn over of a younger high skill and qualified farmers generation. Poor land capital, in terms of utilized agricultural areas, connected to an increase of new technologies, was the downside of Romanian farms and this implied that the National Rural Development Plan should  have taken into account financial subsides in order to implement agricultural areas scattered in Romanian rural space.

Technical Agency in Practice

DEFF Research Database (Denmark)

Krummheuer, Antonia Lina

2015-01-01

) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

Ownership and technical efficiency of hospitals: evidence from Ghana using data envelopment analysis.

Science.gov (United States)

Jehu-Appiah, Caroline; Sekidde, Serufusa; Adjuik, Martin; Akazili, James; Almeida, Selassi D; Nyonator, Frank; Baltussen, Rob; Asbu, Eyob Zere; Kirigia, Joses Muthuri

2014-04-08

In order to measure and analyse the technical efficiency of district hospitals in Ghana, the specific objectives of this study were to (a) estimate the relative technical and scale efficiency of government, mission, private and quasi-government district hospitals in Ghana in 2005; (b) estimate the magnitudes of output increases and/or input reductions that would have been required to make relatively inefficient hospitals more efficient; and (c) use Tobit regression analysis to estimate the impact of ownership on hospital efficiency. In the first stage, we used data envelopment analysis (DEA) to estimate the efficiency of 128 hospitals comprising of 73 government hospitals, 42 mission hospitals, 7 quasi-government hospitals and 6 private hospitals. In the second stage, the estimated DEA efficiency scores are regressed against hospital ownership variable using a Tobit model. This was a retrospective study. In our DEA analysis, using the variable returns to scale model, out of 128 district hospitals, 31 (24.0%) were 100% efficient, 25 (19.5%) were very close to being efficient with efficiency scores ranging from 70% to 99.9% and 71 (56.2%) had efficiency scores below 50%. The lowest-performing hospitals had efficiency scores ranging from 21% to 30%.Quasi-government hospitals had the highest mean efficiency score (83.9%) followed by public hospitals (70.4%), mission hospitals (68.6%) and private hospitals (55.8%). However, public hospitals also got the lowest mean technical efficiency scores (27.4%), implying they have some of the most inefficient hospitals.Regarding regional performance, Northern region hospitals had the highest mean efficiency score (83.0%) and Volta Region hospitals had the lowest mean score (43.0%).From our Tobit regression, we found out that while quasi-government ownership is positively associated with hospital technical efficiency, private ownership negatively affects hospital efficiency. It would be prudent for policy-makers to examine the

[Analysis of the technical efficiency of hospitals in the Spanish National Health Service].

Science.gov (United States)

Pérez-Romero, Carmen; Ortega-Díaz, M Isabel; Ocaña-Riola, Ricardo; Martín-Martín, José Jesús

To analyse the technical efficiency and productivity of general hospitals in the Spanish National Health Service (NHS) (2010-2012) and identify explanatory hospital and regional variables. 230 NHS hospitals were analysed by data envelopment analysis for overall, technical and scale efficiency, and Malmquist index. The robustness of the analysis is contrasted with alternative input-output models. A fixed effects multilevel cross-sectional linear model was used to analyse the explanatory efficiency variables. The average rate of overall technical efficiency (OTE) was 0.736 in 2012; there was considerable variability by region. Malmquist index (2010-2012) is 1.013. A 23% variability in OTE is attributable to the region in question. Statistically significant exogenous variables (residents per 100 physicians, aging index, average annual income per household, essential public service expenditure and public health expenditure per capita) explain 42% of the OTE variability between hospitals and 64% between regions. The number of residents showed a statistically significant relationship. As regards regions, there is a statistically significant direct linear association between OTE and annual income per capita and essential public service expenditure, and an indirect association with the aging index and annual public health expenditure per capita. The significant room for improvement in the efficiency of hospitals is conditioned by region-specific characteristics, specifically aging, wealth and the public expenditure policies of each one. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Meta-Analysis as a Choice to Improve Research in Career and Technical Education

Science.gov (United States)

Gordon, Howard R. D.; McClain, Clifford R.; Kim, Yeonsoo; Maldonado, Cecilia

2010-01-01

A search of the ERIC and Academic Search Premier data bases, and a comprehensive review of literature suggest that meta-analysis is ignored by career and technical education (CTE) researchers, a situation that is regrettable but remediable. The purpose of this theoretical paper is to provide CTE researchers and consumers with procedures for…

Real-world cure rates for hepatitis C virus treatments that include simeprevir and/or sofosbuvir are comparable to clinical trial results.

Science.gov (United States)

Bichoupan, Kian; Tandon, Neeta; Crismale, James F; Hartman, Joshua; Del Bello, David; Patel, Neal; Chekuri, Sweta; Harty, Alyson; Ng, Michel; Sigel, Keith M; Bansal, Meena B; Grewal, Priya; Chang, Charissa Y; Leong, Jennifer; Im, Gene Y; Liu, Lawrence U; Odin, Joseph A; Bach, Nancy; Friedman, Scott L; Schiano, Thomas D; Perumalswami, Ponni V; Dieterich, Douglas T; Branch, Andrea D

2017-11-12

To assess the real-world effectiveness and cost of simeprevir (SMV), and/or sofosbuvir (SOF)-based therapy for chronic hepatitis C virus (HCV) infection. The real-world performance of patients treated with SMV/SOF ± ribavirin (RBV), SOF/RBV, and SOF/RBV with pegylated-interferon (PEG) were analyzed in a consecutive series of 508 patients with chronic HCV infection treated at a single academic medical center. Patients with genotypes 1 through 4 were included. Rates of sustained virological response - the absence of a detectable serum HCV RNA 12 wk after the end of treatment [sustained virological response (SVR) 12] - were calculated on an intention-to-treat basis. Costs were calculated from the payer's perspective using Medicare/Medicaid fees and Redbook Wholesale Acquisition Costs. Patient-related factors associated with SVR12 were identified using multivariable logistic regression. SVR12 rates were as follows: 86% (95%CI: 80%-91%) among 178 patients on SMV/SOF ± RBV; 62% (95%CI: 55%-68%) among 234 patients on SOF/RBV; and 78% (95%CI: 68%-86%) among 96 patients on SOF/PEG/RBV. Mean costs-per-SVR12 were $174442 (standard deviation: ± $18588) for SMV/SOF ± RBV; $223003 (± $77946) for SOF/RBV; and $126496 (± $31052) for SOF/PEG/RBV. Among patients on SMV/SOF ± RBV, SVR12 was less likely in patients previously treated with a protease inhibitor [odds ratio (OR): 0.20, 95%CI: 0.06-0.56]. Higher bilirubin (OR: 0.47, 95%CI: 0.30-0.69) reduced the likelihood of SVR12 among patients on SOF/RBV, while FIB-4 score ≥ 3.25 reduced the likelihood of SVR12 (OR: 0.18, 95%CI: 0.05-0.59) among those on SOF/PEG/RBV. SVR12 rates for SMV and/or SOF-based regimens in a diverse real-world population are comparable to those in clinical trials. Treatment failure accounts for 27% of costs.

Simulation analysis for integrated evaluation of technical and commercial risk

International Nuclear Information System (INIS)

Gutleber, D.S.; Heiberger, E.M.; Morris, T.D.

1995-01-01

Decisions to invest in oil- and gasfield acquisitions or participating interests often are based on the perceived ability to enhance the economic value of the underlying asset. A multidisciplinary approach integrating reservoir engineering, operations and drilling, and deal structuring with Monte Carlo simulation modeling can overcome weaknesses of deterministic analysis and significantly enhance investment decisions. This paper discusses the use of spreadsheets and Monte Carlo simulation to generate probabilistic outcomes for key technical and economic parameters for ultimate identification of the economic volatility and value of potential deal concepts for a significant opportunity. The approach differs from a simple risk analysis for an individual well by incorporating detailed, full-field simulations that vary the reservoir parameters, capital and operating cost assumptions, and schedules on timing in the framework of various deal structures

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Mechanistic approach to generalized technical analysis of share prices and stock market indices

Science.gov (United States)

Ausloos, M.; Ivanova, K.

2002-05-01

Classical technical analysis methods of stock evolution are recalled, i.e. the notion of moving averages and momentum indicators. The moving averages lead to define death and gold crosses, resistance and support lines. Momentum indicators lead the price trend, thus give signals before the price trend turns over. The classical technical analysis investment strategy is thereby sketched. Next, we present a generalization of these tricks drawing on physical principles, i.e. taking into account not only the price of a stock but also the volume of transactions. The latter becomes a time dependent generalized mass. The notion of pressure, acceleration and force are deduced. A generalized (kinetic) energy is easily defined. It is understood that the momentum indicators take into account the sign of the fluctuations, while the energy is geared toward the absolute value of the fluctuations. They have different patterns which are checked by searching for the crossing points of their respective moving averages. The case of IBM evolution over 1990-2000 is used for illustrations.

Technical Support to an Operating PWR vis-a-vis Safety Analysis

International Nuclear Information System (INIS)

Gul, Subhan; Khan, M.; Chughtai, M. Kamran

2011-01-01

Currently a PWR of 300 MWe capacity CHASNUPP-I is in operation since the year 2000. Technical support being provided includes in-core fuel management and corresponding safety analysis for the reshuffled core for the next cycle. Currently calculation and analysis were performed for Cycle 6 to achieve the safe and economical loading pattern. The technique used is designated as out in mode (modified). In this technique, most of the fresh fuel assemblies are not directly located at the periphery of the core, but near the boundary. This technique has the advantage that without using burnable absorber we can design a low leakage core with extended cycle and maximum batch averaged burnup. (author)

Analysis of the frequency of technical-tactical actions in taekwondo: a review

Directory of Open Access Journals (Sweden)

Paula Avakian

2016-12-01

Full Text Available Taekwondo (TKD is a combat sport, focusing on head-height kicks, spinning kicks and skipping. The emphasis on technical-tactical combinations with speed and agility is an essential characteristic of this modality. Therefore, this review aims to contribute to the critical analysis of technical-tactical actions of TKD athletes, using relative effort and pause moments of official competitions. This review investigated tactical arrangements (i.e., attacks, defenses and blocks, technical performance (points, kicks and punches, regarding to weight category, age class and gender. In fact, rule changes in recent years have increased defensive actions in the senior category, with about 50% of actions in attacks, followed by 30% in defenses and 20% in blocking actions. While juniors tend to adopt an offensive strategy, with about 90% of the actions in attacks. Since the introduction of the scoring electronic system, high-performance athletes need to perform accurate and correct techniques to achieve scoring, so elite athletes have used short-distance techniques with kicks from the back leg. This action shows effectiveness in scoring and assists competitors in increasing defensive capability and counter-attacks. Consequently, training programs need to be specific to the rules, weight divisions, gender and age categories in elite athletes in TKD.

Head Start Impact Study. Technical Report

Science.gov (United States)

Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

2010-01-01

This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

Teaching technical writing in multilingual contexts: a meta-analysis

NARCIS (Netherlands)

Winberg, Christine; van der Geest, Thea; Lehman, Barbara; Nduna, Joyce

2010-01-01

Teachers of technical and professional writing in Science, Engineering and Technology (SET) Programmes need to understand the particular needs and social contexts of students for whom English is not a first language. The focus of this paper is on technical writing, and the paper presents the

The technical analysis of the stock exchange and physics: Japanese candlesticks for solar activity

Science.gov (United States)

Dineva, C.; Atanasov, V.

2013-09-01

In this article, we use the Japanese candlesticks, a method popular in the technical analysis of the Stock/Forex markets and apply it to a variable in physics-the solar activity. This method is invented and used exclusively for economic analysis and its application to a physical problem produced unexpected results. We found that the Japanese candlesticks are convenient tool in the analysis of the variables in the physics of the Sun. Based on our observations, we differentiated a new cycle in the solar activity.

Outcomes of Technical Variant Liver Transplantation versus Whole Liver Transplantation for Pediatric Patients: A Meta-Analysis.

Science.gov (United States)

Ye, Hui; Zhao, Qiang; Wang, Yufang; Wang, Dongping; Zheng, Zhouying; Schroder, Paul Michael; Lu, Yao; Kong, Yuan; Liang, Wenhua; Shang, Yushu; Guo, Zhiyong; He, Xiaoshun

2015-01-01

To overcome the shortage of appropriate-sized whole liver grafts for children, technical variant liver transplantation has been practiced for decades. We perform a meta-analysis to compare the survival rates and incidence of surgical complications between pediatric whole liver transplantation and technical variant liver transplantation. To identify relevant studies up to January 2014, we searched PubMed/Medline, Embase, and Cochrane library databases. The primary outcomes measured were patient and graft survival rates, and the secondary outcomes were the incidence of surgical complications. The outcomes were pooled using a fixed-effects model or random-effects model. The one-year, three-year, five-year patient survival rates and one-year, three-year graft survival rates were significantly higher in whole liver transplantation than technical variant liver transplantation (OR = 1.62, 1.90, 1.65, 1.78, and 1.62, respectively, ptechnical variant liver transplantation. Continuing efforts should be made to minimize surgical complications to improve the outcomes of technical variant liver transplantation.

Technical findings and regulatory analysis for Generic Safety Issue II.E.4.3, ''Containment Integrity Check''

International Nuclear Information System (INIS)

Serkiz, A.W.

1988-04-01

This report contains the technical findings and regulatory analysis for Generic Safety Issue II.E.4.3, ''Containment Integrity Check.'' An evaluation of the containment isolation history from 1965 to 1983 reveals that (except for a small number of events) containment integrity has been maintained and that the majority of reported events have been events related to exceeding Technical Specification limits (or 0.6 of the allowable leakage level). In addition, more recent risk analyses have shown that allowable leakage rates even if increased by a factor of 10 would not significantly increase risk. Potential methods of continuous monitoring are identified and evaluated. Therefore, these technical findings and risk evaluations support closure of Generic Safety Issue II.E.4.3

Analysis of factors affecting the technical efficiency of cocoa ...

African Journals Online (AJOL)

The study estimated the technical efficiency of cocoa producers and the socioeconomic factors influencing technical efficiency and identified the constraints to cocoa production. A multi-stage random sampling method was used to select 180 cocoa farmers who were interviewed for the study. Data on the inputs used and ...

Mengukur Efisiensi Kontraktor di Sektor Konstruksi Nasional Menggunakan Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Muhammad Arsyad

2015-08-01

Full Text Available This paper presents the research finding of efficiency benchmarking for national contractors using Data Envelopment Analysis (DEA. It aims to compare the efficiency of contractors and to obtain the best performing contractor against which peer firms may benchmark their performance. Input measures were number of staff, staff cost, number of completed projects in one year, total value of completed projects in one year while output measures were revenue and net profit. This research sampled twenty four large construction firms operating in the Indonesian construction market, with a wide variety of organization ownership types. Based on the average DEA scores assigned from 0 % (inefficient to 100 % (efficient during the observation period from 2007 to 2012, Indonesia Stock Exchange (IDX-listed State-Owned Firms (SOFs; 98.16 % ranked the highest, followed by foreign firms (97.90 %, non-IDXlisted private firms (88.22 %, IDX-listed private firms (84.65 %, and non-IDX-listed SOFs (62.89 % with average scores being 87.07 %. No statistical difference in efficiency was found between those IDX-listed and those not. This paper accordingly encourages immediate actions of far below-average national firms to improve their efficiency for especially facing the verge of the 2015 ASEAN free trade era.

Study on the Technical Efficiency of Creative Human Capital in China by Three-Stage Data Envelopment Analysis Model

Directory of Open Access Journals (Sweden)

Jian Ma

2014-01-01

Full Text Available Previous researches have proved the positive effect of creative human capital and its development on the development of economy. Yet, the technical efficiency of creative human capital and its effects are still under research. The authors are trying to estimate the technical efficiency value in Chinese context, which is adjusted by the environmental variables and statistical noises, by establishing a three-stage data envelopment analysis model, using data from 2003 to 2010. The research results indicate that, in this period, the entirety of creative human capital in China and the technical efficiency value in different regions and different provinces is still in the low level and could be promoted. Otherwise, technical non-efficiency is mostly derived from the scale nonefficiency and rarely affected by pure technical efficiency. The research also examines environmental variables’ marked effects on the technical efficiency, and it shows that different environmental variables differ in the aspect of their own effects. The expansion of the scale of education, development of healthy environment, growth of GDP, development of skill training, and population migration could reduce the input of creative human capital and promote the technical efficiency, while development of trade and institutional change, on the contrary, would block the input of creative human capital and the promotion the technical efficiency.

Secondary Analysis of Audio Data. Technical Procedures for Virtual Anonymization and Pseudonymization

Directory of Open Access Journals (Sweden)

Henning Pätzold

2005-01-01

Full Text Available Qualitative material presented as audio data requires a greater degree of protecting of anonymity than for example textual data. Apart from the verbal content, it carries paraverbal aspects including voice characteristics, thus making it easier to identify the speaker. This complicates secondary analysis or reanalysis conducted by researchers who were not involved in the data collection. Difficulties increase if the chances are high that the researcher and the interviewee come in contact for example through a meeting. This paper describes the technical procedures that are used to modify the sound of the audio source in a way that it reduces the possibility of recognition (i.e. similar to that of a carefully written transcript. A discussion of the technical possibilities of this procedure along with an exploration of the boundaries of anonymization is presented. URN: urn:nbn:de:0114-fqs0501249

Eye Development in Sepia officinalis Embryo: What the Uncommon Gene Expression Profiles Tell Us about Eye Evolution.

Science.gov (United States)

Imarazene, Boudjema; Andouche, Aude; Bassaglia, Yann; Lopez, Pascal-Jean; Bonnaud-Ponticelli, Laure

2017-01-01

In metazoans, there is a remarkable diversity of photosensitive structures; their shapes, physiology, optical properties, and development are different. To approach the evolution of photosensitive structures and visual function, cephalopods are particularly interesting organisms due to their most highly centralized nervous system and their camerular eyes which constitute a convergence with those of vertebrates. The eye morphogenesis in numerous metazoans is controlled mainly by a conserved Retinal Determination Gene Network (RDGN) including pax, six, eya , and dac playing also key developmental roles in non-retinal structures and tissues of vertebrates and Drosophila . Here we have identified and explored the role of Sof-dac, Sof-six1/2, Sof-eya in eye morphogenesis, and nervous structures controlling the visual function in Sepia officinalis . We compare that with the already shown expressions in eye development of Sof-otx and Sof-pax genes. Rhodopsin is the pigment responsible for light sensitivity in metazoan, which correlate to correlate visual function and eye development. We studied Sof-rhodopsin expression during retina differentiation. By in situ hybridization, we show that (1) all of the RDGN genes, including Sof-pax6 , are expressed in the eye area during the early developmental stages but they are not expressed in the retina, unlike Sof-otx , which could have a role in retina differentiation; (2) Sof-rhodopsin is expressed in the retina just before vision gets functional, from stage 23 to hatching. Our results evidence a role of Sof-six1/2, Sof-eya , and Sof-dac in eye development. However, the gene network involved in the retinal photoreceptor differentiation remains to be determined. Moreover, for the first time, Sof-rhodopsin expression is shown in the embryonic retina of cuttlefish suggesting the evolutionary conservation of the role of rhodopsin in visual phototransduction within metazoans. These findings are correlated with the physiological and

Eye Development in Sepia officinalis Embryo: What the Uncommon Gene Expression Profiles Tell Us about Eye Evolution

Directory of Open Access Journals (Sweden)

Boudjema Imarazene

2017-08-01

Full Text Available In metazoans, there is a remarkable diversity of photosensitive structures; their shapes, physiology, optical properties, and development are different. To approach the evolution of photosensitive structures and visual function, cephalopods are particularly interesting organisms due to their most highly centralized nervous system and their camerular eyes which constitute a convergence with those of vertebrates. The eye morphogenesis in numerous metazoans is controlled mainly by a conserved Retinal Determination Gene Network (RDGN including pax, six, eya, and dac playing also key developmental roles in non-retinal structures and tissues of vertebrates and Drosophila. Here we have identified and explored the role of Sof-dac, Sof-six1/2, Sof-eya in eye morphogenesis, and nervous structures controlling the visual function in Sepia officinalis. We compare that with the already shown expressions in eye development of Sof-otx and Sof-pax genes. Rhodopsin is the pigment responsible for light sensitivity in metazoan, which correlate to correlate visual function and eye development. We studied Sof-rhodopsin expression during retina differentiation. By in situ hybridization, we show that (1 all of the RDGN genes, including Sof-pax6, are expressed in the eye area during the early developmental stages but they are not expressed in the retina, unlike Sof-otx, which could have a role in retina differentiation; (2 Sof-rhodopsin is expressed in the retina just before vision gets functional, from stage 23 to hatching. Our results evidence a role of Sof-six1/2, Sof-eya, and Sof-dac in eye development. However, the gene network involved in the retinal photoreceptor differentiation remains to be determined. Moreover, for the first time, Sof-rhodopsin expression is shown in the embryonic retina of cuttlefish suggesting the evolutionary conservation of the role of rhodopsin in visual phototransduction within metazoans. These findings are correlated with the

[Multilevel analysis of the technical efficiency of hospitals in the Spanish National Health System by property and type of management].

Science.gov (United States)

Pérez-Romero, Carmen; Ortega-Díaz, M Isabel; Ocaña-Riola, Ricardo; Martín-Martín, José Jesús

2018-05-11

To analyze technical efficiency by type of property and management of general hospitals in the Spanish National Health System (2010-2012) and identify hospital and regional explanatory variables. 230 hospitals were analyzed combining data envelopment analysis and fixed effects multilevel linear models. Data envelopment analysis measured overall, technical and scale efficiency, and the analysis of explanatory factors was performed using multilevel models. The average rate of overall technical efficiency of hospitals without legal personality is lower than hospitals with legal personality (0.691 and 0.876 in 2012). There is a significant variability in efficiency under variable returns (TE) by direct, indirect and mixed forms of management. The 29% of the variability in TE es attributable to the Region. Legal personality increased the TE of the hospitals by 11.14 points. On the other hand, most of the forms of management (different to those of the traditional hospitals) increased TE in varying percentages. At regional level, according to the model considered, insularity and average annual income per household are explanatory variables of TE. Having legal personality favours technical efficiency. The regulatory and management framework of hospitals, more than public or private ownership, seem to explain technical efficiency. Regional characteristics explain the variability in TE. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Analysis of the prevailing standard and technical documents for their applicability under conditions of the 'Ukrytie' operation and technical proposals relating to the elaboration of new ones concerning fire safety

International Nuclear Information System (INIS)

Nazarenko, B.S.; Emets, V.G.

1998-01-01

An analysis of the prevailing laws and standards and technical documents (STD) to ensure safe operation of nuclear power installations, with requirements of nuclear, radiation and fire safety taken into account, has been performed. Proposals on application of some items of prevailing STD under conditions of the 'Ukrytie' operation are presented. Also given are technical proposals on correction of the prevailing operational standard documents and elaboration of special STD

Why and How to Advance Technical Copywriting.

Science.gov (United States)

Henson, Leigh

1996-01-01

States that promotional writing for industrial/high-tech products, or technical copywriting, is gaining more attention in technical communication, although it is neglected in higher education. Testifies to the significance of technical copywriting. Suggests that dialogical audience analysis and an emphasis on rational appeal will contribute to…

Technical Analysis of Combined Solar Water Heating Systems for Cold Climate Regions

OpenAIRE

Hossein Lotfizadeh; André McDonald; Amit Kumar

2016-01-01

Renewable energy resources, which can supplement space and water heating for residential buildings, can have a noticeable impact on natural gas consumption and air pollution. This study considers a technical analysis of a combined solar water heating system with evacuated tube solar collectors for different solar coverage, ranging from 20% to 100% of the total roof area of a typical residential building located in Edmonton, Alberta, Canada. The alternative heating systems were conventional (n...

Technical characteristic analysis of wind energy conversion systems for sustainable development

International Nuclear Information System (INIS)

BoroumandJazi, G.; Rismanchi, B.; Saidur, R.

2013-01-01

Highlights: ► Identifying the required technical characteristics of sustainable wind power system. ► Observing Weibull probability function and artificial neural networks for reliability. ► Daily/monthly generation data are used to investigate the system’s availability. - Abstract: Wind energy as a clean, environmentally friendly and cost effective renewable energy resource, is taken into consideration by many developed and developing countries as a promising means to provide electrical energy. In feasibility study stage of the wind energy systems, the sustainability analysis is one of the main issues that can assure the investors and stockholders to invest in this renewable energy. Since a system can be truly sustainable by achieving the energetic, ecological and economic sustainability, the present study will focus on the technical characteristics and performance analysis of the wind energy systems. The relations between reliability, availability, energy and exergy efficiency, risk management and the environmental impact of the wind energy systems are investigated in the context of this study. It is concluded that the wind characteristics data and the wind speed are the main effective parameters on its reliability and availability. It is also revealed that considering the system loss, exergy efficiency results of the wind energy systems are more reliable than the energy efficiencies. Due to avoid future failure of the systems, the causes of the failure are investigated and it was concluded that the structural failures caused by storms and strong winds are known as the most prevalent failures

Savremene metode analize ulja u tehničkim sistemima / Modern methods of oil analysis in technical systems

Directory of Open Access Journals (Sweden)

Sreten R. Perić

2010-01-01

Full Text Available Analiza ulja na osnovu pravilno definisanog programa predstavlja veoma efikasan metod monitoringa stanja tehničkih sistema koji obezbeđuje rane upozoravajuće znake potencijalnih problema, koji vode ka otkazu i zastoju tehničkih sistema. Ova analiza je veoma efikasan alat programa za monitoring stanja tehničkih sistema. Mnogobrojni uređaji i testovi za analizu ulja omogućavaju kvalitetan monitoring i dijagnosticiranje problema koji nastaju u procesu podmazivanja. Korišćenjem programa za analizu motornih ulja: skraćuje se neplanirano vreme otkaza vozila, poboljšava pouzdanost vozila, produžava radni vek motora, optimizira interval zamene ulja i smanjuju troškovi održavanja vozila. / Different technical systems require an appropriate lubricant to be used at an appropriate place, at appropriate time and in appropriate quantity. Determination of technical systems condition has a very important role in the development of theory and practice of friction, wear and lubrication. Lubricant is, as a contact element of tribomechanical systems, a carrier of information about the state of the whole system, from the aspect of tribological and other ageing processes. The analysis of oils, based on a properly defined program, thus represents a very effective method for monitoring the condition of technical systems, which ensures early warning signals of potential problems that could lead to failure and break down of technical systems. Introduction It is not always simple to determine a type of lubricant, frequency of lubrication and the quantity of lubricant to be used. The optimal recommendation would be to follow specifications of technical system manufacturers, experience, lab research or professional recommendation of lubricant suppliers. Rational lubricant consumption can be obtained by timely oil replacement, which then enables a maximum possible period of use as well as high-quality lubrication. Since the primary role of lubricants is to

Technical and economic analysis of grid-connected PV/Wind energy stations in the Republic of Serbia under varying climatic conditions

OpenAIRE

Bakić, Vukman V.; Pezo, Milada L.; Stojković, Saša M.

2016-01-01

In this paper technical and economic analysis of grid-connected PV/Wind energy systems located in the Republic of Serbia are presented. The technical and economic data, of the various grid-connected PV/Wind hybrid energy systems for three different locations: Novi Sad, Belgrade and Kopaonik, using the transient simulations software TRNSYS and HOMER were obtained. The results obtained in this paper show that locations and technical characteristics of the energy systems have an important influe...

Keys of Japanese Prosody and Didactical-Technical Analysis of OJAD (Online Japanese Accent Dictionary)

Science.gov (United States)

Delgado Algarra, Emilio José

2016-01-01

Most of the studies focus on the teaching of foreign languages indicate that little attention is paid to the prosodic features both didactic materials and teaching-learning processes (Martinsen, Avord and Tanner, 2014). In this context and throughout this article, an analysis of the didactical and technical dimensions of OJAD (Japanese Accent…

Technical mechanics in constructional reactor safety

International Nuclear Information System (INIS)

Matthees, W.

1979-01-01

Reactor safety is based on close cooperation between a number of technical and scientific disciplines; most problems of reactor technology can be solved with the aid of technical mechanics. At the 5th International Conference on Structural Mechanics in Reactor Technology (5th SMIRT), one of the biggest conferences in the field of applied technical mechanics, about 800 papers were read giving the latest state of knowledge in the field of constructional reactor safety. The main subject of the conference was the analysis of material behaviour under high loads; the information and methods of these analysis go far beyond what is required in the conventional field. (orig./UA) [de

A Preliminary Rhetoric of Technical Copywriting.

Science.gov (United States)

Henson, Leigh

1994-01-01

Discusses the rhetorical elements of technical copywriting, including its shared communicative aims with technical writing; authorship considerations such as ethics, education, and professionalism; and the concerns of promotional strategy, audience analysis, choice of media and materials, writing strategy, and style. (SR)

Formation of trading strategy based on technical analysis and application in the FOREX market

OpenAIRE

Butkus, Mindaugas; Tamašauskas, Mantas

2016-01-01

This paper accomplishes modification of technical analysis based trading strategy for the FOREX market. New strategy performance was checked using historical data. Most profitable modification was excluded and optimized. Straipsnyje atliktas technine analize grįstos prekybos strategijos, skirtos FOREX rinkai, modifikavimas. Naujos strategijos veikimas patikrintas su istoriniais duomenimis. Buvo atrinkta ir optimizuota pelningiausia modifikacija.

Assessment of New Calculation Method for Toxicological Sums-of-Fractions for Hanford Tank Wastes

International Nuclear Information System (INIS)

Mahoney, Lenna A.

2006-01-01

The toxicological source terms used for potential accident assessment in the Tank Farms DSA are based on toxicological sums-of-fractions (SOFs) that were calculated in fiscal years 2002 and 2003 based on the Best Basis Inventory (BBI) from May 2002, using the method described by Cowley et al. (2003). The present report describes a modified SOF-calculation method that is to be used in future toxicological updates and assessments and compares its results (for the 2002 BBI) to those of the old method. The new method generally calculated different (usually larger) SOFs than the old. The dominant reason was the more conservative way in which the new method represents concentration variability, in that it uses the waste layer with the maximum SOF to represent the tank SOF. The old method had used a tank-average waste composition and SOF. Differences between thermodynamically modeled and BBI solubilities were the next most common reason for differences between old (modeled) and new (BBI) SOFs, particularly in the liquid phase. The solubility-related changes in SOF were roughly equally distributed between increases and decreases. Changes in the effective toxicities of TOC and lead, which resulted from changes in the compounds in which these analytes were considered to be present, were the third most common reason. These toxicity changes increased SOFs and therefore were in a conservative direction.

The back end of the nuclear fuel cycle: technical and economic analysis-Part 1

International Nuclear Information System (INIS)

Roglans-Ribas, J.; Spinrad, B.I.

1990-01-01

The back end of the nuclear fuel cycle has been analyzed under current conditions in the United States, taking into consideration the framework defined by the Nuclear Waste Policy Act of 1982 and its amendments. The different steps of the back end of the fuel cycle are studied and different alternatives are compared under technical and economic criteria. Several technical issues have been analyzed for their impact on the economics of the fuel cycle. The bases for the analysis are explained, and the results for a once-through cycle are presented. The results show that a repository in tuff represents the minimum cost situation. The economic model appears very sensitive to several parameters, in particular the period of retrievability and the storage costs

Iranian nurses' experience of essential technical competences in disaster response: A qualitative content analysis study.

Science.gov (United States)

Aliakbari, Fatemeh; Bahrami, Masoud; Aein, Fereshteh; Khankeh, Hamidreza

2014-11-01

Today disasters are a part of many people's lives. Iran has a long history of disaster events and nurses are one of the most significant groups within the Iranian disaster relief operations, providing immediate and long-term care for those affected by the disaster. However, the technical competence of Iranian nurses and their training for this work has received little attention. This article presents the results of a study that aims to explore this context. A qualitative study was conducted using in-depth interviews to collect data from 30 nurses, who were deliberately selected from the health centers affiliated to the Isfahan University of Medical Sciences. Themes were identified using the conventional qualitative content analysis. The trustworthiness of the study was supported by considering the auditability, neutrality, consistency, and transferability. The study lasted from 2011 to 2012. Data analysis undertaken for the qualitative study resulted in the identification of five main themes, which included: (1) Management competences, (2) ethical and legal competences, (3) team working, and (4) personal abilities and the specific technical competences presented in this report. This report presents an overview of the nursing technical capabilities required for Iranian nurses during disaster relief. It is argued that additional competencies are required for nurses who care in high-risk situations, including disasters. Nurses need to prepare themselves more effectively to be responsible and effective in nursing care.

Canadian CANDU plant data systems for technical surveillance and analysis

International Nuclear Information System (INIS)

Deverno, M.; Pothier, H.; Xian, C.; Grosbois, J. De; Bosnich, M.

1996-01-01

Plant data systems are emerging as a critical plant support system technology. In particular, plant-wide Historical Data Systems (HDS) are pivotal to the successful implementation of technical surveillance and analysis programs supporting plant operations, maintenance, safety, and licensing activities. In partnership with Canadian CANDU utility and design organizations, AECL has conducted a review of current Canadian CANDU HDS approaches with emphasis on understanding the existing functionality and uses of plant historical data systems, their future needs and benefits. The results is a vision of a plant-wide HDS providing seamless access to both near real-time and historical data, user tool-kits for data visualization and analysis, and data management of the large volume of data acquired during the life of a plant. The successful implementation of the HDS vision will lead to higher capability and capacity factors while minimizing Operations, Maintenance, and Administration (OM and A) costs. (author). 5 refs, 3 figs

Canadian CANDU plant data systems for technical surveillance and analysis

Energy Technology Data Exchange (ETDEWEB)

Deverno, M; Pothier, H; Xian, C [Atomic Energy of Canada Ltd., Control Centre Technology Branch, Fredericton, NB (Canada); Grosbois, J De; Bosnich, M [Atomic Energy of Canada Ltd., Control Centre Technology Branch, Chalk River, ON (Canada). Chalk River Labs.

1997-12-31

Plant data systems are emerging as a critical plant support system technology. In particular, plant-wide Historical Data Systems (HDS) are pivotal to the successful implementation of technical surveillance and analysis programs supporting plant operations, maintenance, safety, and licensing activities. In partnership with Canadian CANDU utility and design organizations, AECL has conducted a review of current Canadian CANDU HDS approaches with emphasis on understanding the existing functionality and uses of plant historical data systems, their future needs and benefits. The results is a vision of a plant-wide HDS providing seamless access to both near real-time and historical data, user tool-kits for data visualization and analysis, and data management of the large volume of data acquired during the life of a plant. The successful implementation of the HDS vision will lead to higher capability and capacity factors while minimizing Operations, Maintenance, and Administration (OM and A) costs. (author). 5 refs, 3 figs.

An Application of Fuzzy Theory to Technical Competency Analysis for the Entry-Level Electronic Technician.

Science.gov (United States)

Chang, Liang-Te; And Others

A study was conducted to develop the electronic technical competencies of duty and task analysis by using a revised DACUM (Developing a Curriculum) method, a questionnaire survey, and a fuzzy synthesis operation. The revised DACUM process relied on inviting electronics trade professionals to analyze electronic technology for entry-level…

Modern Methods of Multidimensional Data Visualization: Analysis, Classification, Implementation, and Applications in Technical Systems

Directory of Open Access Journals (Sweden)

I. K. Romanova

2016-01-01

Full Text Available The article deals with theoretical and practical aspects of solving the problem of visualization of multidimensional data as an effective means of multivariate analysis of systems. Several classifications are proposed for visualization techniques, according to data types, visualization objects, the method of transformation of coordinates and data. To represent classification are used charts with links to the relevant work. The article also proposes two classifications of modern trends in display technology, including integration of visualization techniques as one of the modern trends of development, along with the introduction of interactive technologies and the dynamics of development processes. It describes some approaches to the visualization problem, which are concerned with fulfilling the needs. The needs are generated by the relevant tasks such as information retrieval in global networks, development of bioinformatics, study and control of business processes, development of regions, etc. The article highlights modern visualization tools, which are capable of improving the efficiency of the multivariate analysis and searching for solutions in multi-objective optimization of technical systems, but are not very actively used for such studies. These are horizontal graphs, graphics "quantile-quantile", etc. The paper proposes to use Choropleth cards traditionally used in cartography for simultaneous presentation of the distribution parameters of several criteria in the space. It notes that visualizations of graphs in network applications can be more actively used to describe the control system. The article suggests using the heat maps to provide graphical representation of the sensitivity of the system quality criteria under variations of options (multivariate analysis of technical systems. It also mentions that it is useful to extend the supervising heat maps to the task of estimating quality of identify in constructing system models. A

Danglers in Patient Information Leaflets and Technical Manuals

DEFF Research Database (Denmark)

Køhler Simonsen, Henrik

2014-01-01

in fact been proved. The analysis and the discussion showed that dangling participles are not very frequent in PILs, but much more common in technical manuals. The data showed that there were no “ludicrous” danglers,(see Matthews and Matthews 2008:146), in PILcorp. However, the analysis showed that both......Dangling participles and other types of ambiguous or unclear sentence constructions in directive and informative medical and technical texts, such as patient information leaflets (PILs) and technical manuals, render instructions unclear and potentially dangerous for the layman reader, i......, and readability on the basis of two corpora: a corpus of PILs (PILcorp) and a corpus of technical manuals (TECHcorp). The hypothesis is that patient information leaflets will contain fewer dangling constructions than technical manuals because of the strict regulations on product information texts including PILs...

Technical efficiency of Shiraz school of medicine in research and education domains: a data envelopment analysis.

Science.gov (United States)

Delavari, Somayeh; Rezaee, Rita; Hatam, Nahid; Delavari, Sajad

2016-01-01

Efficiency evaluation of universities and faculties is one of the tools that help managers to identify the departments' strengths and weakness. The main objective of the present research was to measure and compare the technical efficiency of Shiraz school of medicine departments using Data Envelopment Analysis (DEA) technique. This cross-sectional and retrospective study was performed on clinical and non-clinical departments in research and education domains over the period of 2006 to 2011. Different inputs and outputs were considered for research and educational domain separately. Efficiency was measured based on the observed optimal performance. Findings showed that pathology and anatomy departments achieved the score of 100 in technical efficiency in education during 2006 to 2011. During this period, parasitology, psychiatric and pediatrics department's achieved the score of 100 for technical efficiency in research domain. The lowest mean of relative educational efficiency belonged to orthopedic department; as to relative research efficiency, the lowest mean was shown in orthopedics and genetics departments. The mean technical efficiency of non-medical departments in education and research domain was 91.93 and 76.08, respectively, while the mean technical efficiency of the clinical department in educational and research fields was 91.02 and 82.23, respectively. Using multiple input and output in DEA technique provided a comprehensive evaluation of efficiency in Shiraz school of medicine departments. The DEA could successfully estimate the technical efficiency of the departments in research and educational fields. Moreover, the deficiency in each department was found; this could help them to plan for improvement.

Geospatial Analysis of Renewable Energy Technical Potential on Tribal Lands

Energy Technology Data Exchange (ETDEWEB)

Doris, E.; Lopez, A.; Beckley, D.

2013-02-01

This technical report uses an established geospatial methodology to estimate the technical potential for renewable energy on tribal lands for the purpose of allowing Tribes to prioritize the development of renewable energy resources either for community scale on-tribal land use or for revenue generating electricity sales.

Comparisons: Technical-Tactical and Time-Motion Analysis of Mixed Martial Arts by Outcomes.

Science.gov (United States)

Miarka, Bianca; Vecchio, Fabrício B D; Camey, Suzi; Amtmann, John A

2016-07-01

Miarka, B, Vecchio, FBD, Camey, S, and Amtmann, JA. Comparisons: technical-tactical and time-motion analysis of mixed martial arts by outcomes. J Strength Cond Res 30(7): 1975-1984, 2016-The aim of this study was to compare time-motion and technical-tactical analysis between paired outcomes and rounds of mixed martial arts (MMA) matches. The sample consisted of 645 rounds of MMA competition paired by outcomes (first round, winners n = 215 and losers n = 215; second round, winners n = 215 and losers n = 215; third round, winners n = 215 and losers n = 215). The time-motion variables were categorized into low-intensity or high-intensity, stand-up or groundwork situations. Stand-up techniques were analyzed by observing total strikes to the head and body, and takedowns. The actions on the ground were analyzed by observing submission activity, including successful choking and joint locking actions, and also positional improvements, including advances to the mount, half guard, and side and back positions. Chi-squared and Wilcoxon tests were conducted with a significance level of p ≤ 0.05. Results showed that winners had higher values for total strikes and submissions in all rounds, and also positional improvements, over losers. The standing combat with low-intensity comparisons presented differences between the rounds first, with a median of 2:33.5 (P25-P75%: 1:20-3:56) minute, second, with 2:37 (1:24-3:59) minute, and third, with 2:07 (1:06-3:39.2) minute. These data suggest a focus on the intermittent demand presented in combat phases with a special attention to the strike and ground technical-tactical skills; strength and conditioning coaches could emphasize the effort pause ratios for both standing and ground combat that mimic the requirements of MMA, especially during the third round.

45 CFR 1158.205 - Professional and technical services.

Science.gov (United States)

2010-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... 45 Public Welfare 3 2010-10-01 2010-10-01 false Professional and technical services. 1158.205... Own Employees § 1158.205 Professional and technical services. (a) The prohibition on the use of...

7 CFR 3018.205 - Professional and technical services.

Science.gov (United States)

2010-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... 7 Agriculture 15 2010-01-01 2010-01-01 false Professional and technical services. 3018.205 Section....205 Professional and technical services. (a) The prohibition on the use of appropriated funds, in...

7 CFR 3018.300 - Professional and technical services.

Science.gov (United States)

2010-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 7 Agriculture 15 2010-01-01 2010-01-01 false Professional and technical services. 3018.300 Section... Employees § 3018.300 Professional and technical services. (a) The prohibition on the use of appropriated...

49 CFR 20.300 - Professional and technical services.

Science.gov (United States)

2010-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 49 Transportation 1 2010-10-01 2010-10-01 false Professional and technical services. 20.300... Activities by Other Than Own Employees § 20.300 Professional and technical services. (a) The prohibition on...

20 CFR 438.205 - Professional and technical services.

Science.gov (United States)

2010-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Professional and technical services. 438.205... Own Employees § 438.205 Professional and technical services. (a) The prohibition on the use of...

International comparisons of the technical efficiency of the hospital sector: panel data analysis of OECD countries using parametric and non-parametric approaches.

Science.gov (United States)

Varabyova, Yauheniya; Schreyögg, Jonas

2013-09-01

There is a growing interest in the cross-country comparisons of the performance of national health care systems. The present work provides a comparison of the technical efficiency of the hospital sector using unbalanced panel data from OECD countries over the period 2000-2009. The estimation of the technical efficiency of the hospital sector is performed using nonparametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Internal and external validity of findings is assessed by estimating the Spearman rank correlations between the results obtained in different model specifications. The panel-data analyses using two-step DEA and one-stage SFA show that countries, which have higher health care expenditure per capita, tend to have a more technically efficient hospital sector. Whether the expenditure is financed through private or public sources is not related to the technical efficiency of the hospital sector. On the other hand, the hospital sector in countries with higher income inequality and longer average hospital length of stay is less technically efficient. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Technical specification improvement through safety margin considerations

International Nuclear Information System (INIS)

Howard, R.C.; Jansen, R.L.

1986-01-01

Westinghouse has developed an approach for utilizing safety analysis margin considerations to improve plant operability through technical specification revision. This approach relies on the identification and use of parameter interrelations and sensitivities to identify acceptable operating envelopes. This paper summarizes technical specification activities to date and presents the use of safety margin considerations as another viable method to obtain technical specification improvement

Development of international standards for surface analysis by ISO technical committee 201 on surface chemical analysis

International Nuclear Information System (INIS)

Powell, C.J.

1999-01-01

Full text: The International Organization for Standardization (ISO) established Technical Committee 201 on Surface Chemical Analysis in 1991 to develop documentary standards for surface analysis. ISO/TC 201 met first in 1992 and has met annually since. This committee now has eight subcommittees (Terminology, General Procedures, Data Management and Treatment, Depth Profiling, AES, SIMS, XPS, and Glow Discharge Spectroscopy (GDS)) and one working group (Total X-Ray Fluorescence Spectroscopy). Each subcommittee has one or more working groups to develop standards on particular topics. Australia has observer-member status on ISO/TC 201 and on all ISO/TC 201 subcommittees except GDS where it has participator-member status. I will outline the organization of ISO/TC 201 and summarize the standards that have been or are being developed. Copyright (1999) Australian X-ray Analytical Association Inc

45 CFR 1158.300 - Professional and technical services.

Science.gov (United States)

2010-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... 45 Public Welfare 3 2010-10-01 2010-10-01 false Professional and technical services. 1158.300... Other Than Own Employees § 1158.300 Professional and technical services. (a) The prohibition on the use...

10 CFR 601.300 - Professional and technical services.

Science.gov (United States)

2010-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 10 Energy 4 2010-01-01 2010-01-01 false Professional and technical services. 601.300 Section 601... Activities by Other Than Own Employees § 601.300 Professional and technical services. (a) The prohibition on...

22 CFR 311.205 - Professional and technical services.

Science.gov (United States)

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Professional and technical services. 311.205... § 311.205 Professional and technical services. (a) The prohibition on the use of appropriated funds, in...

45 CFR 1168.300 - Professional and technical services.

Science.gov (United States)

2010-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 45 Public Welfare 3 2010-10-01 2010-10-01 false Professional and technical services. 1168.300... Activities by Other Than Own Employees § 1168.300 Professional and technical services. (a) The prohibition on...

22 CFR 138.300 - Professional and technical services.

Science.gov (United States)

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 138.300... Activities by Other Than Own Employees § 138.300 Professional and technical services. (a) The prohibition on...

22 CFR 519.300 - Professional and technical services.

Science.gov (United States)

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Professional and technical services. 519.300... by Other Than Own Employees § 519.300 Professional and technical services. (a) The prohibition on the...

22 CFR 227.300 - Professional and technical services.

Science.gov (United States)

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 227.300... Activities by Other Than Own Employees § 227.300 Professional and technical services. (a) The prohibition on...

20 CFR 438.300 - Professional and technical services.

Science.gov (United States)

2010-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Professional and technical services. 438.300... Other Than Own Employees § 438.300 Professional and technical services. (a) The prohibition on the use...

34 CFR 82.300 - Professional and technical services.

Science.gov (United States)

2010-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... 34 Education 1 2010-07-01 2010-07-01 false Professional and technical services. 82.300 Section 82... by Other Than Own Employees § 82.300 Professional and technical services. (a) The prohibition on the...

Operating experience feedback report: Technical specifications: Commercial power reactors

International Nuclear Information System (INIS)

O'Reilly, P.D.; Plumlee, G.L. III.

1989-03-01

This report documents a trends and patterns analysis of technical specification (TS)-related licensee event reports (LERs) conducted by the Nuclear Regulatory Commission's (NRC's) Office for Analysis and Evaluation of Operational Data (AEOD). The objectives of this analysis were (1) to identify and catalog technical specification-related LERs, (2) to categorize and evaluate the events reported in these a LERs, (3) to identify any issues arising from the evaluation which appear to have generic safety significance, or which relate to the on-going Technical Specification Improvement Program, and (4) to trend the results obtained from the analysis of the data obtained in (1) through (3). 9 refs., 9 figs., 22 tabs

Security analysis of socio-technical physical systems

NARCIS (Netherlands)

Lenzini, Gabriele; Mauw, Sjouke; Ouchani, Samir

2015-01-01

Recent initiatives that evaluate the security of physical systems with objects as assets and people as agents – here called socio-technical physical systems – have limitations: their agent behavior is too simple, they just estimate feasibility and not the likelihood of attacks, or they do estimate

Technical evaluation report of the Fort St. Vrain final draft upgraded technical specifications

International Nuclear Information System (INIS)

Kimura, C.Y.

1989-01-01

This report is a technical evaluation of the final draft of the Fort St. Vrain (FSV) Upgraded Technical Specifications (UT/S) as issued by Public Service of Colorado (PSC) on May 27, 1988 with subsequent supplemental updates issued on June 15, 1988 and August 5, 1988. It has been compared for consistency, and safety conservatism with the Fort St. Vrain (FSV) Updated Final Safety Analysis Report (FSAR), the FSV Safety Evaluation Report (SER), the Facility Operating License, DPR-34, and all amendments to the Facility Operating License issued as of June 1, 1988, and Appendix A to the Operating License DPR-34, Technical Specifications. Because of the age of the plant, no supplements to the Fort St. Vrain SER have been issued since the original SER was not issued as a WASH or a NUREG report. This made it necessary to review all amendments to the Facility Operating License since they would contain the safety evaluations done to support changes to the Facility Operating License. The upgraded Fort St. Vrain Technical Specifications were also broadly compared with the latest Westinghouse Standard Technical Specifications (WSTS) to assure that what was proposed for Fort St. Vrain was consistent with the latest NRC staff practices for standard technical specifications

ANALYSIS OF THE POSSIBILITY OF INTEGRATING A MINING RIGHT-ANGLE PLANETARY GEARBOX WITH TECHNICAL DIAGNOSTICS SYSTEMS

Directory of Open Access Journals (Sweden)

Andrzej WIECZOREK

2016-12-01

Full Text Available A key factor enabling the achievement of the required capacity by longwall mining systems is to obtain a satisfactory service life for individual components of such systems. Such components include right-angle planetary gearboxes for armoured face conveyors. An increase in the service life of such equipment can be achieved by ensuring adequacy in terms of design, materials and organization. As a part of organizational changes, the use of individual diagnostics systems may have the greatest impact on the service life of mining gearboxes; however, their widespread implementation is limited by economic and operational barriers. This paper presents an analysis of the possibility of integrating mining gearboxes with electronic systems of technical diagnostics, as well as expanding the scope of the technical condition monitoring by the machines operating together with these gearboxes. As a result of the calculation and design work performed, it has been demonstrated that it is possible to integrate technical diagnostics systems with advanced data transmission capabilities inside gearboxes.

Degrees of systematic thoroughness: A text analysis of student technical science writing

Science.gov (United States)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic

Hierarchical cluster analysis of technical replicates to identify interferents in untargeted mass spectrometry metabolomics.

Science.gov (United States)

Caesar, Lindsay K; Kvalheim, Olav M; Cech, Nadja B

2018-08-27

Mass spectral data sets often contain experimental artefacts, and data filtering prior to statistical analysis is crucial to extract reliable information. This is particularly true in untargeted metabolomics analyses, where the analyte(s) of interest are not known a priori. It is often assumed that chemical interferents (i.e. solvent contaminants such as plasticizers) are consistent across samples, and can be removed by background subtraction from blank injections. On the contrary, it is shown here that chemical contaminants may vary in abundance across each injection, potentially leading to their misidentification as relevant sample components. With this metabolomics study, we demonstrate the effectiveness of hierarchical cluster analysis (HCA) of replicate injections (technical replicates) as a methodology to identify chemical interferents and reduce their contaminating contribution to metabolomics models. Pools of metabolites with varying complexity were prepared from the botanical Angelica keiskei Koidzumi and spiked with known metabolites. Each set of pools was analyzed in triplicate and at multiple concentrations using ultraperformance liquid chromatography coupled to mass spectrometry (UPLC-MS). Before filtering, HCA failed to cluster replicates in the data sets. To identify contaminant peaks, we developed a filtering process that evaluated the relative peak area variance of each variable within triplicate injections. These interferent peaks were found across all samples, but did not show consistent peak area from injection to injection, even when evaluating the same chemical sample. This filtering process identified 128 ions that appear to originate from the UPLC-MS system. Data sets collected for a high number of pools with comparatively simple chemical composition were highly influenced by these chemical interferents, as were samples that were analyzed at a low concentration. When chemical interferent masses were removed, technical replicates clustered in

C. Rubbia's hybrid plant concept: a preliminary technical and economic analysis

International Nuclear Information System (INIS)

Bacher, P.

1999-01-01

The long term development of nuclear energy depends, inter alia, on the ability to use the abundant fertile materials (238U and/or thorium) and on an accepted management of the long-lived radioactive wastes. In order to meet both these objectives, C. Rubbia has presented a new version of an old concept: the hybrid reactor where a subcritical reactor is fed with neutrons produced by spallation. In his concept, the reactor is a molten lead cooled fast reactor, which can use either the uranium or the thorium cycle, and burn the minor actinides and some fission products. The present work is a preliminary and partial technical and economic analysis of the reactor part of C. Rubbia's proposal as they were set forth in a French Parliamentary audition in November 1996. The technical conclusions are that many of the design options proposed are not optimum and the uncertainties important, which is not particularly surprising at this stage of the concept. The economic 'guesstimate' yields a cost per kWh anywhere between one and two times that of a modern light water reactor, which is in contradiction with C. Rubbia's claims (half the cost.), but in a range which warrants more conceptual work before drawing any conclusions. Alternative design concepts are suggested. (orig.)

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

Science.gov (United States)

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, ptechnical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of

Mujeres detrás de la escena: Isabel Carrasquilla y Sofía Ospina de Navarro, dramaturgas al margen en la primera mitad del siglo XX en Colombia

Directory of Open Access Journals (Sweden)

Nancy Johana Correa Serna

2018-01-01

Full Text Available El artículo analiza las representaciones de género de tres comedias de Isabel Carrasquilla de Arango y dos de Sofía Ospina de Navarro, quienes son consideradas como intelectuales; productoras de representaciones y de discursos. Aunque su destacada posición social les permitió intervenir en la escena pública de Medellín, dominada por esquemas masculinos, en parte como un legado de ese poder letrado del siglo XIX, estuvieron al margen, pues no contaron con educación superior y, dentro de la escena cultural, su actividad intelectual se asoció generalmente a las figuras masculinas que las rodearon durante sus vidas. Así mismo, sus producciones fueron identificadas con los denominados géneros menores: crónica, cuento y pequeñas obras teatrales, que se consideraban aceptables y propicias para las mujeres. Sin embargo, sus comedias presentan una visión renovada, y a veces transgredida, sobre los estereotipos de género de la época.

Designing socio-technical systems : Structures and processes

NARCIS (Netherlands)

Bots, P.W.G.; Van Daalen, C.

2012-01-01

The Systems Engineering, Policy Analysis and Management (SEPAM) MSc curriculum taught at Delft University of Technology focuses on the design of socio-technical systems (STS). We teach our students to structure design activities by considering what we call the TIP aspects: Technical systems,

KSC Technical Capabilities Website

Science.gov (United States)

Nufer, Brian; Bursian, Henry; Brown, Laurette L.

2010-01-01

This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

Transformation of technical infrastructure

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

, the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop......The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure...

Technical considerations on scanning and image analysis for amyloid PET in dementia

International Nuclear Information System (INIS)

Akamatsu, Go; Ohnishi, Akihito; Aita, Kazuki; Ikari, Yasuhiko; Senda, Michio; Yamamoto, Yasuji

2017-01-01

Brain imaging techniques, such as computed tomography (CT), magnetic resonance imaging (MRI), single photon emission computed tomography (SPECT), and positron emission tomography (PET), can provide essential and objective information for the early and differential diagnosis of dementia. Amyloid PET is especially useful to evaluate the amyloid-β pathological process as a biomarker of Alzheimer's disease. This article reviews critical points about technical considerations on the scanning and image analysis methods for amyloid PET. Each amyloid PET agent has its own proper administration instructions and recommended uptake time, scan duration, and the method of image display and interpretation. In addition, we have introduced general scanning information, including subject positioning, reconstruction parameters, and quantitative and statistical image analysis. We believe that this article could make amyloid PET a more reliable tool in clinical study and practice. (author)

Technical Considerations on Scanning and Image Analysis for Amyloid PET in Dementia.

Science.gov (United States)

Akamatsu, Go; Ohnishi, Akihito; Aita, Kazuki; Ikari, Yasuhiko; Yamamoto, Yasuji; Senda, Michio

2017-01-01

Brain imaging techniques, such as computed tomography (CT), magnetic resonance imaging (MRI), single photon emission computed tomography (SPECT), and positron emission tomography (PET), can provide essential and objective information for the early and differential diagnosis of dementia. Amyloid PET is especially useful to evaluate the amyloid-β pathological process as a biomarker of Alzheimer's disease. This article reviews critical points about technical considerations on the scanning and image analysis methods for amyloid PET. Each amyloid PET agent has its own proper administration instructions and recommended uptake time, scan duration, and the method of image display and interpretation. In addition, we have introduced general scanning information, including subject positioning, reconstruction parameters, and quantitative and statistical image analysis. We believe that this article could make amyloid PET a more reliable tool in clinical study and practice.

Marketing information: The technical report as product

Science.gov (United States)

Stoher, F. F.; Pinelli, T. E.

1981-01-01

Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

ATR Technical Specification Upgrade Program

International Nuclear Information System (INIS)

McCracken, R.T.; Durney, J.L.; Freund, G.A.

1990-01-01

The Advanced Test Reactor (ATR) is a 250 MW, uranium-aluminum fueled test reactor which began full power operation in 1969. The initial operation was controlled by an Operating Limits document based on the original Safety Analysis Report. Additional safety bases were later developed to support Technical Specifications which were approved and implemented in 1977. The Technical Specifications which were initially developed with content and format specified in ANSI/ANS--15.1, ''The Development of Technical Specifications for Research Reactors.'' The safety basis documentation and the Technical Specifications have been updated as required to maintain them current with the ATR facility configuration. All revisions have been made with a content, format and style consistent with the original. A major, two-phase program to upgrade the content, format and style is in progress. This paper describes the first phase of this program

Vehicle Integrated Performance Analysis, the VIPA Experience: Reconnecting with Technical Integration

Science.gov (United States)

McGhee, David S.

2005-01-01

Today's NASA is facing significant challenges and changes. The Exploration initiative indicates a large increase in projects with limited increase in budget. The Columbia report has criticized NASA for its lack of insight and technical integration impacting its ability to provide safety. The Aldridge report is advocating NASA find new ways of doing business. Very early in the Space Launch Initiative (SLI) program a small team of engineers at MSFC were asked to propose a process for performing a system level assessment of a launch vehicle. The request was aimed primarily at providing insight and making NASA a "smart buyer." Out of this effort the VIPA team was created. The difference between the VIPA effort and many integration attempts is that VIPA focuses on using experienced people from various disciplines and a process which focuses them on a technically integrated assessment. Most previous attempts have focused on developing an all encompassing software tool. In addition, VIPA anchored its process formulation in the experience of its members and in early developmental Space Shuttle experience. The primary reference for this is NASA-TP-2001-210092, "Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned," and discussions with its authors. The foundations of VIPA's process are described. The VIPA team also recognized the need to drive detailed analysis earlier in the design process. Analyses and techniques typically done in later design phases, are brought forward using improved computing technology. The intent is to allow the identification of significant sensitivities, trades, and design issues much earlier in the program. This process is driven by the T-model for Technical Integration described in the aforementioned reference. VIPA's approach to performing system level technical integration is discussed in detail. Proposed definitions are offered to clarify this discussion and the general systems integration dialog. VIPA

Gas Sensing Analysis of Ag-Decorated Graphene for Sulfur Hexafluoride Decomposition Products Based on the Density Functional Theory

Directory of Open Access Journals (Sweden)

Xiaoxing Zhang

2016-11-01

Full Text Available Detection of decomposition products of sulfur hexafluoride (SF6 is one of the best ways to diagnose early latent insulation faults in gas-insulated equipment, and the occurrence of sudden accidents can be avoided effectively by finding early latent faults. Recently, functionalized graphene, a kind of gas sensing material, has been reported to show good application prospects in the gas sensor field. Therefore, calculations were performed to analyze the gas sensing properties of intrinsic graphene (Int-graphene and functionalized graphene-based material, Ag-decorated graphene (Ag-graphene, for decomposition products of SF6, including SO2F2, SOF2, and SO2, based on density functional theory (DFT. We thoroughly investigated a series of parameters presenting gas-sensing properties of adsorbing process about gas molecule (SO2F2, SOF2, SO2 and double gas molecules (2SO2F2, 2SOF2, 2SO2 on Ag-graphene, including adsorption energy, net charge transfer, electronic state density, and the highest and lowest unoccupied molecular orbital. The results showed that the Ag atom significantly enhances the electrochemical reactivity of graphene, reflected in the change of conductivity during the adsorption process. SO2F2 and SO2 gas molecules on Ag-graphene presented chemisorption, and the adsorption strength was SO2F2 > SO2, while SOF2 absorption on Ag-graphene was physical adsorption. Thus, we concluded that Ag-graphene showed good selectivity and high sensitivity to SO2F2. The results can provide a helpful guide in exploring Ag-graphene material in experiments for monitoring the insulation status of SF6-insulated equipment based on detecting decomposition products of SF6.

A hybrid stock trading framework integrating technical analysis with machine learning techniques

Directory of Open Access Journals (Sweden)

Rajashree Dash

2016-03-01

Full Text Available In this paper, a novel decision support system using a computational efficient functional link artificial neural network (CEFLANN and a set of rules is proposed to generate the trading decisions more effectively. Here the problem of stock trading decision prediction is articulated as a classification problem with three class values representing the buy, hold and sell signals. The CEFLANN network used in the decision support system produces a set of continuous trading signals within the range 0–1 by analyzing the nonlinear relationship exists between few popular technical indicators. Further the output trading signals are used to track the trend and to produce the trading decision based on that trend using some trading rules. The novelty of the approach is to engender the profitable stock trading decision points through integration of the learning ability of CEFLANN neural network with the technical analysis rules. For assessing the potential use of the proposed method, the model performance is also compared with some other machine learning techniques such as Support Vector Machine (SVM, Naive Bayesian model, K nearest neighbor model (KNN and Decision Tree (DT model.

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

Science.gov (United States)

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

The Technical Analysis of the Impact of Circuit of Financial Capital on the Currency Stability in Ukraine

Directory of Open Access Journals (Sweden)

Iaroshevska Oksana V.

2018-01-01

Full Text Available The relevance of the article’s topic is determined by the aggravation of the monetary and financial crisis in Ukraine and the need to overcome imbalances arising from the complications of circuit of financial capital and its involvement by economic entities. The article is aimed at researching on the basis of technical analysis the influence of exchange rate factor on the formation of capital in the country. The general and distinctive features of technical and fundamental analysis of currency markets are defined. It is shown that despite the difference of views, technical analysis is an integral stage of forecasting the exchange rate. The main scientific result of the article is substantiating the temporary lags of fractals, which explain the change in the dynamics of the exchange rate and their impact on the circuit of financial capital. It has been proved that the systemic crisis in the currency market of Ukraine arose during 2012–2014, with its peak at the end of the specified period. To stop devaluation processes and to provide measures on regulation of the foreign exchange market it has been proposed to soften the conditions of doing business, to improve the methodology of quantitative and qualitative forecasting of the NBU exchange rates, to form system of foreign exchange risk insurance instruments, to increase international reserves to a secure level, etc. Prospect for further research is determining the impact of currency fluctuations on the financial performance of the use of capital of Ukrainian economic entities.

Waste management project technical baseline description

International Nuclear Information System (INIS)

Sederburg, J.P.

1997-01-01

A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project

Proceedings of the workshop on structural analysis needs for magnetic fusion energy superconducting magnets: a technical assessment

International Nuclear Information System (INIS)

Reich, M.; Lehner, J.; Powell, J.; Bezler, P.

1976-01-01

The technical portions of the meeting were divided into three major sessions as follows: (1) Review of methods being presently used by the MFE community for structural evaluation of current designs. (2) Future structural analysis needs. (3) Open discussions dealing with adequacy of present methods, the improvements needed for MFE magnet structural analysis, and the establishment of an MFE magnet structural advisory group. Summaries of the individual talks are presented

Proceedings of the workshop on structural analysis needs for magnetic fusion energy superconducting magnets: a technical assessment

Energy Technology Data Exchange (ETDEWEB)

Reich, M.; Lehner, J.; Powell, J.; Bezler, P.

1976-01-01

The technical portions of the meeting were divided into three major sessions as follows: (1) Review of methods being presently used by the MFE community for structural evaluation of current designs. (2) Future structural analysis needs. (3) Open discussions dealing with adequacy of present methods, the improvements needed for MFE magnet structural analysis, and the establishment of an MFE magnet structural advisory group. Summaries of the individual talks are presented.

El arte feminista y su exhibición: la musealización de un conflicto. El caso del Museo Nacional Centro de Arte Reina Sofía

Directory of Open Access Journals (Sweden)

Rivera Martorell, Sara

2013-06-01

Full Text Available La visibilización de la producción artística y cultural de la mujer sigue siendo un debate complicado que oscila, entre la necesaria discriminación positiva, y la todavía más urgente y necesaria integración de la producción femenina al hilo de un nuevo discurso renovado y más plural, desechando esa historia oficial en favor de una reformulación de los criterios de valoración de las obras donde dar cabida a todas esas narrativas olvidadas. Así pues, es labor de las grandes instituciones como los museos empezar la dura tarea de transformación de discursos ya que, desgraciadamente, seguimos anclados en la fácil estrategia de segregar y encasillar para seguir contando lo mismo de siempre. El Museo Nacional Centro de Arte Reina Sofía lo ha vuelto a hacer en la apertura de su nueva colección permanente, dedicando una de sus salas a hablar del arte feminista de los 70 en nuestro país. ¿Hasta cuándo?

FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

Science.gov (United States)

The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

FHWA vehicle crash analysis conference proceedings : technical summary

Science.gov (United States)

1997-04-01

This technical summary announces the publication of conference proceedings as a Federal Highway Administration (FHWA) report (FHWA-RD-96-212) of the same title. The report represents a compilation of seven research papers presented at The FHWA Veh...

Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

Science.gov (United States)

Hammond, Dana P.

1991-01-01

The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

ERLN Technical Support for Labs

Science.gov (United States)

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

COMPARATIVE ANALYSIS OF TECHNICAL IDICATORS AND TACTICAL UTILITY OF THEIR APPLICATION IN FOOTBALL

Directory of Open Access Journals (Sweden)

Peko Vujović

2010-09-01

Full Text Available The aim of the research is to ascertain the manifested differences in the inner structure of the game and to establish and notify the tendencies of football game development movement by a comparative analysis, according to the manifested differences that examined according to the technical and tactics characteristics. The specimen is representative, thus the research includes the most successful national teams (semi-final and final on XVI, XVII and XVIII World Football Championship. The analysis includes offensive playing, movements of certain players during the game, the way in which the ball is passed, the goalkeeper’s performance... This research has once again proved the presence of permanent further tendencies of movement of the contemporary top-level football.

1980 Annual status report: provision of scientific and technical services

International Nuclear Information System (INIS)

1981-01-01

Two kinds of objectives are pursued at the JRC in direct support of the various General Directorates of the Commission: Technical Evaluations where system analysis techniques are mainly employed and Technical Assistance where laboratory measurement, technical expertises and management of projects are provided

Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

Science.gov (United States)

Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

2017-03-01

The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and HONcode principles. The mean readability for OWs and PWs was

Engineering and Technical Education in Russia, in Numbers

Science.gov (United States)

Aref'ev, A. L.; Aref'ev, M. A.

2013-01-01

An analysis of the main tendencies in the development of engineering and technical education in Russia during the last 100 years shows that earlier strengths have been lost, and that currently technical education in Russia is far behind modern world standards.

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

Science.gov (United States)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Research on power market technical analysis index system employing high-low matching mechanism

Science.gov (United States)

Li, Tao; Wang, Shengyu

2018-06-01

The power market trading technical analysis refers to a method that takes the bidding behavior of members in the power market as the research object, sums up some typical market rules and price trends by applying mathematical and logical methods, and finally can effectively assist members in the power market to make more reasonable trading decisions. In this paper, the following four indicators have been proposed: bidding price difference scale, extreme bidding price rate, dispersion of bidding price and monthly transaction satisfaction of electricity trading, which are the core of the index system.

Comparative evaluation of effect of different polishing systems on surface roughness of composite resin: An in vitro study.

Science.gov (United States)

Chour, Rashmi G; Moda, Aman; Arora, Arpana; Arafath, Muhmmed Y; Shetty, Vikram K; Rishal, Yousef

2016-08-01

Satisfactory composite restoration depends upon its smooth finish, quality of polishing agents, type of composite material used, and its composition. The present study evaluated the effect of different polishing systems on the surface roughness of composite resin. Forty discs of composite were prepared and equally subjected to different finishing and polishing procedures; (i) unpolished control group, (ii) sof-lex discs, (iii) diamond tips, and (iv) Astrobrush groups. Later, the surface roughness for the entire specimen was evaluated using Profilomotor. Data were tabulated and statistically analyzed using analysis of variance and Tukey's test at significance level of 0.001. Composite surface roughness after polishing was statistically significant between the groups. Sof-lex group produced lesser surface roughness compared to control, Astrobrush, and diamond group. The present study indicated that diamond tips can be used to remove rough surface whereas sof-lex can be used for final finish and polish of the composite restoration.

Analysis of scientific and technical production of IPEN-CNEN/SP in the period of 1984 to 1988

International Nuclear Information System (INIS)

Sugai, M.

1989-01-01

An analysis of scientific and technical production of Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP in the period of 1984 to 1988 is presented. It includes articles, dissertation, thesis, books, reports and papers presented in scientific meetings or published in the Publicacao IPEN series. (C.M.)

Technical efficiency of potato and dairy farming in mountainous Kazbegi district, Georgia

Directory of Open Access Journals (Sweden)

R. Shavgulidze

2017-03-01

Full Text Available The study employs a stochastic frontier analysis to assess technical efficiency of potato and cheese production and determine socio-economic factors that influence farmers' technical efficiency levels in mountainous Kazbegi district of Georgia. The study found improved feeding to be inversely related with technical inefficiency in cheese production. In potato production, the analysis revealed implementation of the plant protection measures and use of quality seeds to be significant aspects that influence technical efficiency of potato growers.

Guam Initial Technical Assessment Report

Energy Technology Data Exchange (ETDEWEB)

Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

2011-04-01

Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

The SocioEconomic Analysis of Repository Siting (SEARS): Technical description: Final draft

International Nuclear Information System (INIS)

1984-11-01

Socioeconomic impacts must be assessed both for the near term and for the future. One means of addressing the need for the assessment of such impacts has been through the development of the computerized socioeconomic assessment model called the SocioEconomic Analysis of Repository Siting (SEARS) model. The SEARS model was developed for the Battelle Project Management Division. It was refined and adapted from state-of-the-art computerized projection models and thoroughly validated and is now available for use in projecting the likely socioeconomic impacts of a repository facility. This Technical Description is one of six major products that describe the SEARS modeling system. 61 refs., 11 figs., 9 tabs

Technical and economic analysis of the European electricity system with 60% RES

International Nuclear Information System (INIS)

Burtin, Alain; Silva, Vera

2015-01-01

This document examines the impacts of the integration of a large share of variable renewable generation into the generation mix of the European interconnected electricity system. The analysis, which is based on the results of long term studies performed by EDF R and D, aims at improving the current understanding of the technical and economic feasibility of a massive deployment of wind and PV across the European system. The document addresses several aspects of the system integration of variable generation in particular, including the characterization of variable RES generation, the need for generation and interconnection infrastructure, the impacts on short-term system operation and market profitability. (authors)

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 2: Technical analysis

Science.gov (United States)

1978-01-01

A technical analysis on the feasibility of commercial manufacturing of pharmaceuticals in space is presented. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is described. The candidate products are antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon. Production mass balances for antihemophelic factor, beta cells, and erythropoietin were compared for space versus ground operation. A conceptual description of a multiproduct processing system for space operation is discussed. Production requirements for epidermal growth factor of alpha-1-antitrypsin and interferon are presented.

Savannah River Site sample and analysis plan for Clemson Technical Center waste

International Nuclear Information System (INIS)

Hagstrom, T.

1998-04-01

The purpose of this sampling and analysis plan is to determine the chemical, physical and radiological properties of the SRS radioactive Polychlorinated Biphenyl (PCB) liquid waste stream, to verify that it conforms to Waste Acceptance Criteria of the Department of Energy (DOE) East Tennessee Technology Park (ETTP) Toxic Substance Control Act (TSCA) Incineration Facility. Waste being sent to the ETTP TSCA Incinerator for treatment must be sufficiently characterized to ensure that the waste stream meets the waste acceptance criteria to ensure proper handling, classification, and processing of incoming waste to meet the Waste Storage and Treatment Facility's Operating Permits. This sampling and analysis plan is limited to WSRC container(s) of homogeneous or multiphasic radioactive PCB contaminated liquids generated in association with a treatability study at Clemson Technical Center (CTC) and currently stored at the WSRC Solid Waste Division Mixed Waste Storage Facility (MWSF)

Paramedics' non-technical skills: a literature review.

Science.gov (United States)

Shields, Allan; Flin, Rhona

2013-05-01

Healthcare organisations have started to examine the impact that the human worker has on patient safety. Adopting the Crew Resource Management (CRM) approach, used in aviation, the CRM or non-technical skills of anaesthetists, surgeons, scrub practitioners and emergency physicians have recently been identified to assist in their training and assessment. Paramedics are exposed to dynamic and dangerous situations where patients have to be managed, often with life-threatening injuries or illness. As in other safety-critical domains, the technical skills of paramedics are complemented by effective non-technical skills. The aim of this paper was to review the literature on the non-technical (social and cognitive) skills used by paramedics. This review was undertaken as part of a task analysis to identify the non-technical skills used by paramedics. Of the seven papers reviewed, the results have shown very little research on this topic and so reveal a gap in the understanding of paramedic non-technical skills.

Fabrication of silicon solar cell with >18% efficiency using spin-on-film processing for phosphorus diffusion and SiO{sub 2}/graded index TiO{sub 2} anti-reflective coating

Energy Technology Data Exchange (ETDEWEB)

Lee, Yi-Yu; Ho, Wen-Jeng, E-mail: wjho@ntut.edu.tw; Yeh, Chien-Wu

2015-11-01

Highlights: • Employed SOF technology for both phosphorus diffusion and multi-layer ARCs. • Optical properties of TiO{sub 2}, SiO{sub 2}, and SiO{sub 2}/TiO{sub 2}/TiO{sub 2} films are characterized. • Photovoltaic performances of the fabricated solar cells are measured and compared. • An impressive efficiency of 18.25% was obtained by using the SOF processes. - Abstract: This study employed spin-on film (SOF) technology for the fabrication of phosphorus diffusion and multi-layer anti-reflective coatings (ARCs) with a graded index on silicon (Si) wafers. Low cost and high efficiency solar cells are important issues for the operating cost of a photovoltaic system. SOF technology for the fabrication of solar cells can be for the achievement of this goal. This study succeeded in the application of SOF technology in the preparation of both phosphorus diffusion and SiO{sub 2}/graded index TiO{sub 2} ARCs for Si solar cells. Optical properties of TiO{sub 2}, SiO{sub 2}, and multi-layer SiO{sub 2}/TiO{sub 2} deposition by SOF are characterized. Electrical and optical characteristics of the fabricated solar cells are measured and compared. An impressive efficiency of 18.25% was obtained by using the SOF processes.

BASIC TECHNICAL SKILLS (THROWS IN 17-19-YEAR-OLD JUDOKAS

Directory of Open Access Journals (Sweden)

Wladyslaw Jagiello

2014-12-01

Full Text Available Purpose: The purpose of the research was to determine basic technical skills (throws in 17-19-year-old judokas and the level of their performance. Material: The study involved 30 judo athletes (aged 17-19. Results: To determine the athletes’ basic technical skills (throws, an analysis of source materials and a diagnostic survey were used. To determine the level of technical skills, the method of expert assessment was applied. Statistical software package Statistica 8 was used in the statistical analysis. In the coaches’ opinion, 17-19-year-old judokas have a specific, characteristic of this age group, set of basic technical skills (throws aptly defining their technical preparation. Conclusions: The tested group of judokas exhibited the highest level of demonstrating throws of the koshi-waza (hip group, and the lowest one of the ashi-waza (foot group.

Solid Waste Program technical baseline description

Energy Technology Data Exchange (ETDEWEB)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Ranking factors of an investment in cogeneration: sensitivity analysis ranking the technical and economical factors

International Nuclear Information System (INIS)

Sundberg, Gunnel

2001-01-01

A deregulation of the electricity market in Europe will result in increased competition among the power-producing companies. They will therefore carefully estimate the financial risk in an investment in new power-producing capability. One part of the risk assessment is to perform a sensitivity analysis. This paper presents a sensitivity analysis using factorial design, resulting in an assessment of the most important technical and economical factors affecting an investment in gas turbine combined cycle and a steam cycle fired by wood chips. The study is performed using a simulation model that optimises the operation of existing power plants and potential new investments to fulfil the desired heat demand. The local utility system analysed is a Swedish district heating system with 655 GWh y -1 heat demand. The conclusion is that to understand which of the technical and economical factors affect the investment, it is not sufficient to investigate the parameters of the studied plant, but also the parameters related to the competing plants. Both the individual effects of the factors and the effect of their interaction should be investigated. For the energy system studied the price of natural gas, price of wood chips and investment cost have the major influence on the profitability of the investment. (Author)

Identification and Characterization of Perinucleolar Compartment-Associated Protein

National Research Council Canada - National Science Library

Leary, Daniel

2002-01-01

.... hSof1, like fibrillarin, localizes to both the nucleolus and nucleoplasm. However, unlike fibrillarin, hSof1 is also in the granular component of nucleoli and responds differently to the inhibition of the transcription of pre- rRNA. In addition, hSof1 -GFP also exhibits a higher nuclear mobility than fibrillarin-GFP and is a nucleocytoplasmic shuttling protein.

A prescribed wake rotor inflow and flow field prediction analysis, user's manual and technical approach

Science.gov (United States)

Egolf, T. A.; Landgrebe, A. J.

1982-01-01

A user's manual is provided which includes the technical approach for the Prescribed Wake Rotor Inflow and Flow Field Prediction Analysis. The analysis is used to provide the rotor wake induced velocities at the rotor blades for use in blade airloads and response analyses and to provide induced velocities at arbitrary field points such as at a tail surface. This analysis calculates the distribution of rotor wake induced velocities based on a prescribed wake model. Section operating conditions are prescribed from blade motion and controls determined by a separate blade response analysis. The analysis represents each blade by a segmented lifting line, and the rotor wake by discrete segmented trailing vortex filaments. Blade loading and circulation distributions are calculated based on blade element strip theory including the local induced velocity predicted by the numerical integration of the Biot-Savart Law applied to the vortex wake model.

A framework for establishing the technical efficiency of Electricity Distribution Counties (EDCs) using Data Envelopment Analysis

International Nuclear Information System (INIS)

Mullarkey, Shane; Caulfield, Brian; McCormack, Sarah; Basu, Biswajit

2015-01-01

Highlights: • Six models are employed to establish the technical efficiency of Electricity Distribution Counties. • A diagnostic parameter is incorporated to account for differences across Electricity Distribution Counties. • The amalgamation of Electricity Distribution Counties leads to improved efficiency in the production of energy. - Abstract: European Energy market liberalization has entailed the restructuring of electricity power markets through the unbundling of electricity generation, transmission and distribution, supply activities and introducing competition into electricity generation. Under these new electricity market regimes, it is important to have an evaluation tool that is capable of examining the impacts of these market changes. The adoption of Data Envelopment Analysis as a form of benchmarking for electricity distribution regulation is one method to conduct this analysis. This paper applies a Data Envelopment Analysis framework to the electricity distribution network in Ireland to explore the merits of using this approach, to determine the technical efficiency and the potential scope for efficiency improvements through reorganizing and the amalgamation of the distribution network in Ireland. The results presented show that overall grid efficiency is improved through this restructuring. A diagnostic parameter is defined and pursued to account for aberrations across Electricity Distribution Counties as opposed to the traditionally employed environmental variables. The adoption of this diagnostic parameter leads to a more intuitive understanding of Electricity Distribution Counties

A "Virtual Fieldtrip": Service Learning in Distance Education Technical Writing Courses

Science.gov (United States)

Soria, Krista M.; Weiner, Brad

2013-01-01

This mixed-methods experimental study examined the effect of service learning in a distance education technical writing course. Quantitative analysis of data found evidence for a positive relationship between participation in service learning and technical writing learning outcomes. Additionally, qualitative analysis suggests that service learning…

Effects of retinol on the in vitro development of Bos indicus embryos to blastocysts in two different culture systems.

Science.gov (United States)

Lima, P F; Oliveira, M A L; Gonçalves, P B D; Montagner, M M; Reichenbach, H-D; Weppert, M; Neto, C C C; Pina, V M R; Santos, M H B

2004-10-01

The objective of this study was to evaluate the effect of retinol on the in vitro development of early embryos of cultured Bos indicus (Expt 1) to the blastocyst stage in medium simplex of optimization (KSOM) or sintetic fluid of oviduct (SOF) or co-cultured (Expt 2) with an oviduct cell monolayer (OCM) in KSOM or SOF. A total of 3149 cumulus-oocyte complexes obtained by aspirating follicles (2-5 mm diameter) from ovaries of slaughtered animals were selected for IVM and incubated in TCM 199 supplemented with 25 mM HEPES at 39 degrees C in air with 5% CO(2) and maximum humidity for 24 h. In vitro fertilization (IVF) was performed in modified defined medium (mDM) medium. Eighteen hours after IVF, cumulus cells were removed and presumptive zygotes were randomly allocated to the experimental groups. Zygotes cultured (Expt 1) in KSOM + retinol, KSOM, SOF + retinol and SOF were incubated in maximum humidity at 39 degrees C, 5% CO(2), 5% O(2) and 90% N(2). Zygotes co-cultured (Expt 2) in KSOM + retinol + OCM, KSOM + OCM, SOF + retinol + OCM and SOF + OCM were incubated at 39 degrees C, 5% CO(2). In both experiments media were partially changed 48 h after IVF and unfertilized ova were removed. Afterwards embryos were kept in culture or co-culture for further 9 days. In Expt 1, blastocyst rates (day 7) were 14.6% (KSOM + retinol), 15.8% (KSOM), 16.4% (SOF + retinol) and 15.9% (SOF). In Expt 2, the blastocyst rates (day 7) were 25.4% (KSOM + retinol + OCM) 14.2% (KSOM + OCM), 24.3% (SOF + retinol + OCM) and 15.9% (SOF + OCM). The same influence profile of retinol was observed in the formation of the expanded (day 9) and hatched (day 11) blastocysts. The results obtained in Expt 2 demonstrated that the addition of 0.28 microg/ml retinol to the embryo culture media used in this study had a significant (p < 0.05) positive effect on bovine early embryonic development, under the conditions tested, and can be used to enhance in vitro embryo production.

ITER co-ordinated technical activities

International Nuclear Information System (INIS)

2001-01-01

As agreed upon between the ITER Engineering Design Activities (EDA) Parties 'Co-ordinated Technical Activities' (CTA) means technical activities which are deemed necessary to maintain the integrity of the international project, so as to prepare for the ITER joint implementation. The scope of these activities includes design adaptation to the specific site conditions, safety analysis and licensing preparation that are based on specific site offers, evaluation of cost and construction schedule, preparation of procurement documents and other issues raised by the Parties collectively, whilst assuring the coherence of the ITER project including design control

INDOT Technical Training Plan : [Technical Summary

Science.gov (United States)

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

Technical assessment of electric heat boosters in low-temperature district heating based on combined heat and power analysis

DEFF Research Database (Denmark)

Cai, Hanmin; You, Shi; Wang, Jiawei

2018-01-01

This paper provides a technical assessment of electric heat boosters (EHBs) in low-energy districts. The analysis is based on a hypothetical district with 23 terraced single-family houses supplied by both a lowtemperature district heating (LTDH) network and a low-voltage network (LVN). Two case...

Technical Aspect for Operating Portable Prompt Gamma Neutron Activation Analysis (PGNAA) on Terengganu Inscribed Stone

International Nuclear Information System (INIS)

Rasif Mohd Zain; Hearie Hassan; Roslan Yahya

2015-01-01

Prompt Gamma Neutron Activation analysis (PGNAA) is a type of neutron activation analysis which can determined element with nearly no gamma ray decay after being irradiated by neutron sourced. Thus, element that cannot be determined by the conventional NAA for example H, B, N, Si and Cd, can be determine by PGNAA. This paper focuses on the technical working procedure for operating portable PGNAA in field work. The device is designed as a portable non-destructive investigation tool applying an isotopic neutron source (Cf-252) and a gamma-ray spectroscopy system for in-situ investigation. The studied have been carried out on Terengganu inscribed stone at Terengganu State Museum. (author)

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 2:] Technical communications in aeronautics: Results of an exploratory study. An analysis of managers' and nonmanagers' responses

Science.gov (United States)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1989-01-01

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that aerospace managers and nonmanagers have different technical communications practices. Five assumptions were established for the analysis. Aerospace managers and nonmanagers were found to have different technical communications practices for three of the five assumptions tested. Although aerospace managers and nonmanagers were found to have different technical communications practices, the evidence was neither conclusive nor compelling that the presumption of difference in practices could be attributed to the duties performed by aerospace managers and nonmanagers.

Multiscale Analysis of Foreign Exchange Order Flows and Technical Trading Profitability

OpenAIRE

Nikola Gradojevic; Camillo Lento

2012-01-01

This paper investigates the multiscale (frequency-dependent) relationship between technical trading profitability and feedback trading effects in the Canada/U.S. dollar foreign exchange market. The results suggest weak evidence that technical trading activities of financial and non-financial customers drive frequent violations of the FX market microstructure assumption that exchange rate movements are driven by order flow. After controlling for transaction costs, we find that the contribution...

Development of knowledge models by linguistic analysis of lexical relationships in technical documents

International Nuclear Information System (INIS)

Seguela, Patrick

2001-01-01

This research thesis addresses the problem of knowledge acquisition and structuring from technical texts, and the use of this knowledge in the development of models. The author presents the Cameleon method which aims at extracting binary lexical relationships from technical texts by identifying linguistic markers. The relevance of this method is assessed in the case of four different corpuses: a written technical corpus, an oral technical corpus, a corpus of texts of instructions, and a corpus of academic texts. The author reports the development of a model of representation of knowledge of a specific field by using lexical relationships. The method is then applied to develop a model used in document search within a knowledge management system [fr

Conjoint utility analysis of technical maturity and project progress of construction project

Directory of Open Access Journals (Sweden)

Ma Wei

2016-01-01

Full Text Available In this paper, taking construction project as the research object, the relationship between the project maturity index calculated by the construction project technical risks with different fine degree and the project progress index is studied, and the equilibrium relationship between the Party A’s utility curve and the Party B’s cost curve of using project maturity index and project progress index as the research variables is analyzed. The results show that, when the construction project technical risk division is more precise, the conjoint utility of the project's technical maturity index and the project progress is higher, and the project’s Party A and Party B two sides are closer to the optimal equilibrium. This shows that the construction project technical risk must be finely divided, and managed and controlled respectively, which will help to improve the conjoint utility of the project Party A and Party B two sides.

PRISM: Special Operations in a Chaotic World. Volume 6, Number 3

Science.gov (United States)

2016-12-07

the executive and legislative branches, and even most in uniform, this singular surgi- cal strike SOF narrative came to be what SOF was known for...partnering with Colombian SOF in the 1990s. It took more than a decade for this indirect approach to achieve strategic effects, ultimately helping...utilized for sup- porting resistance movements. However, one environmental factor deserves additional attention. Given the definitions discussed ear

AN ANALYSIS OF TECHNICAL SECURITY CONTROL REQUIREMENTS FOR DIGITAL I&C SYSTEMS IN NUCLEAR POWER PLANTS

Directory of Open Access Journals (Sweden)

JAE-GU SONG

2013-10-01

Full Text Available Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system.

Technical Efficiency Performance of Conventional Banks

OpenAIRE

Endri, Endri

2012-01-01

This study aims to measure the performance of the technical efficiency of the conventional commercial banks during the period 2008-2009 by using non-parametric method of Data Envelopment Analysis (DEA). Test results showed that the total of all conventional commercial banks during the period 2008-2009 has not shown that optimal performance in which the level of technical efficiency is still below 100 percent. Appalling conditions, the efficiency of national banks experienced a decline of 73.5...

Assessing the technical efficiency of health posts in rural Guatemala: a data envelopment analysis.

Science.gov (United States)

Hernández, Alison R; San Sebastián, Miguel

2014-01-01

Strengthening health service delivery to the rural poor is an important means of redressing inequities. Meso-level managers can help enhance efficiency in the utilization of existing resources through the application of practical tools to analyze routinely collected data reflecting inputs and outputs. This study aimed to assess the efficiency and change in productivity of health posts over two years in a rural department of Guatemala. Data envelopment analysis was used to measure health posts' technical efficiency and productivity change for 2008 and 2009. Input/output data were collected from the regional health office of Alta Verapaz for 34 health posts from the 19 districts comprising the health region. Technical efficiency varied widely across health posts, with mean scores of 0.78 (SD=0.24) and 0.75 (SD=0.21) in 2008 and 2009, respectively. Overall, productivity increased by 4%, though 47% of health posts experienced a decline in productivity. Results were combined on a bivariate plot to identify health posts at the high and low extremes of efficiency, which should be followed up to determine how and why their production processes are operating differently. Assessing efficiency using the data that are available at the meso-level can serve as a first step in strengthening performance. Further work is required to support managers in the routine application of efficiency analysis and putting the results to use in guiding efforts to improve service delivery and increase utilization.

Technical Efficiency of Potato and Dairy Farming in Mountainous Kazbegi District, Georgia

OpenAIRE

Shavgulidze, R.; Bedoshvili, D.; Aurbacher, J.

2017-01-01

The study employs a stochastic frontier analysis to assess technical efficiency of potato and cheese production and determine socio-economic factors that influence farmers' technical efficiency levels in mountainous Kazbegi district of Georgia. The study found improved feeding to be inversely related with technical inefficiency in cheese production. In potato production, the analysis revealed implementation of the plant protection measures and use of quality seeds to be significant aspects th...

Research on technical trading and market efficiency : a trader's perspective

OpenAIRE

Vico-Ivanina, Julianna V.

2012-01-01

Research on the predictive power of technical analysis is a matter of controversy. The objective of this thesis is to look at the empirical research done on technical trading and see how the results can be used from a trader’s perspective. Some results provide strong support for the technical trading and propose useful trading strategies. However, there are some limitations regarding transaction costs, risk adjustment, and statistical tests. Technical research has developed new methodology ap...

FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

KRIPPS, L.J.

2005-03-03

This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

Liver CT image processing: a short introduction of the technical elements.

Science.gov (United States)

Masutani, Y; Uozumi, K; Akahane, Masaaki; Ohtomo, Kuni

2006-05-01

In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed.

Liver CT image processing: A short introduction of the technical elements

International Nuclear Information System (INIS)

Masutani, Y.; Uozumi, K.; Akahane, Masaaki; Ohtomo, Kuni

2006-01-01

In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed

Technical Versus Public Spheres: A Feminist Analysis of Women's Rhetoric in the Twilight Sleep Debates of 1914-1916.

Science.gov (United States)

Johnson, Bethany; Quinlan, Margaret M

2015-01-01

Twilight Sleep (TS) describes the delivery, via an injection, of an amnestic drug cocktail to a parturient woman throughout labor. In order to understand the development of modern-day rhetoric surrounding childbirth methods and procedures, this article explores the debate over TS between the public and technical sphere in New York City between 1914 and 1916 and examines the ways in which this debate altered obstetric health care for middle- and upper-class White women. The public response to this campaign posed a direct challenge to male obstetricians in New York City, many of whom were ill-equipped, both literally and figuratively, to use this procedure. Using a feminist rhetorical criticism, we examined the pro-TS rhetoric of women writers in New York City, the methods they borrowed from the women's movement, and the ensuing dialogue between the public and technical spheres. For this study, we analyzed journal and newspaper articles, a pamphlet, a collection of pro-TS organizational documents, letters to the editor, and books published about TS and the history of birth. Lastly, we analyzed theoretical notions of childbirth in women's health and communication studies. After examining the TS debate, we found that birth practices for middle- and upper-class women in New York City shifted and the obstetric community gained ascendancy over female midwifery. We also found that in certain instances, the rhetoric of pro-TS activists was more technically accurate than the rhetoric of some physicians. Hence the TS debate emerged from an argument over the right to use technical language in the technical and/or the public sphere. Conclusions and implications offered by this historical, feminist analysis question our current understanding of women's health and birthing practices, doctor-patient communication, and patient empowerment and access to technical knowledge.

Technical basis for the ITER final design report, cost review and safety analysis (FDR)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

The ITER final design report, cost review and safety analysis (FDR) is the 4th major milestone, representing the progress made in the ITER Engineering Design Activities. With the approval of the Detailed Design Report (DDR), the design work was concentrated on the requirements of operation, with only relatively minor changes to design concepts of major components. The FDR is the culmination of almost 6 years collaborative design and supporting technical work by the ITER Joint Central Team and Home Teams under the terms of the ITER EDA Agreement. Refs, figs, tabs

Technical basis for the ITER final design report, cost review and safety analysis (FDR)

International Nuclear Information System (INIS)

1998-01-01

The ITER final design report, cost review and safety analysis (FDR) is the 4th major milestone, representing the progress made in the ITER Engineering Design Activities. With the approval of the Detailed Design Report (DDR), the design work was concentrated on the requirements of operation, with only relatively minor changes to design concepts of major components. The FDR is the culmination of almost 6 years collaborative design and supporting technical work by the ITER Joint Central Team and Home Teams under the terms of the ITER EDA Agreement

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

Science.gov (United States)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3. GSFLS technical and financial analysis. Interim report

International Nuclear Information System (INIS)

1978-01-01

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported herein. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. A technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3A. GSFLS technical analysis (appendix). Interim report

International Nuclear Information System (INIS)

1978-01-01

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. A technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3A. GSFLS technical analysis (appendix). Interim report

Energy Technology Data Exchange (ETDEWEB)

Kriger, A.

1978-01-31

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. A technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives.

"EOD, Up!": How Explosive Ordnance Disposal Forces Can Best Support Special Operations Forces

National Research Council Canada - National Science Library

Draper, Stephen R

2006-01-01

... with them. This thesis employs a variety of methodologies, from an analysis of required capabilities to an application of game theory, to determine how SOF can be best supported by existing EOD forces...

Technical structure of the global nanoscience and nanotechnology literature

Energy Technology Data Exchange (ETDEWEB)

Kostoff, Ronald N., E-mail: kostofr@onr.navy.mil; Koytcheff, Raymond G. [Office of Naval Research (United States); Lau, Clifford G. Y. [Institute for Defense Analyses (United States)

2007-10-15

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The {approx}400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list.

Technical structure of the global nanoscience and nanotechnology literature

International Nuclear Information System (INIS)

Kostoff, Ronald N.; Koytcheff, Raymond G.; Lau, Clifford G. Y.

2007-01-01

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The ∼400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list

Treatment and technical intervention time analysis of a robotic stereotactic radiotherapy system.

Science.gov (United States)

Crop, F; Lacornerie, T; Szymczak, H; Felin, A; Bailleux, C; Mirabel, X; Lartigau, E

2014-02-01

The purpose of this study is to obtain a better operational knowledge of Stereotactic Body Radiotherapy (SBRT) treatments with CyberKnife(r). An analysis of both In-room Times (IRT) and technical interventions of 5 years of treatments was performed, during which more than 1600 patients were treated for various indications, including liver (21%), lung (29%), intracranial (13%), head and neck (11%) and prostate (7%). Technical interventions were recorded along with the time of the failure, time to the intervention, and the complexity and duration of the repair. Analyses of Time Between Failures (TBF) and Service Disrupting TBF(disr) were performed. Treatment time data and variability per indication and following different system upgrades were evaluated. Large variations of IRTs were found between indications, but also large variations for each indication. The combination of the time reduction Tool (using Iris(r)) and Improved Stop Handling was of major impact to shortening of treatment times. The first implementation of the Iris collimator alone did not lead to significantly shorter IRTs for us except during prostate treatments. This was mostly due to the addition at the same time of larger rotational compensation for prostate treatments (58 instead of 1.58). Significant differences of duration between the first fraction and following fractions of a treatment, representing the necessity of defining imaging parameters and explanation to patients, were found for liver (12 min) and lung treatments using Xsight(r) Spine (5 min). Liver and lung treatments represent the longest IRT's and involve the largest variability's in IRT. The malfunction rate of the system followed a Weibull distribution with the shape and scale parameters of 0.8 and 39.7. Mean TBF(disr) was 68 work hours. 60 to 80% of the service disrupting interventions were resolved within 30-60 min, 5% required external intervention and 30% occurred in the morning. The presented results can be applied in the

Safety and man in light of the analysis of major technical accidents

International Nuclear Information System (INIS)

Carnino, A.

1990-01-01

Up to the seventies, it was not easy to admit human failure as a cause of industrial accidents. Man was considered as reliable. With the perfection of materials, technical systems and industrial processes though, man has become the weakest link in the chain of technical events. He is and stays a remarkably reliable being, with a roughly estimated average failure quota of 1:1000 manipulations. If the hypothetical risk should be kept very low, this value can become a problem. Instead of judging a mistake as a punishable crime, as the present tendency will have it, a more differentiated, systematical approach is called for. By means of an analysis of four major accidents - Chernobyl, Three Mile Island, Challenger and Bhopal - interesting parallels between the causes of such accidents can be found. Human failure, e.g. of a surgeon, is in most cases, the direct cause of an accident. A whole series of further causes, which can be assigned to different areas of influence but are usually interdependent, also play a role. While the human factor must be viewed as more or less predetermined, far reaching improvements can be made to reduce the risk of accident. Today, thanks to modern technology and new findings, it is possible to practically neutralize human error. This creates more costs and necessitates giving up short term production maximization. It also requires the willingness to give safety absolute priority. The name 'culture de surete' (safety culture) is used to describe this concept. Surprising similarities between the causes of the four mentioned major accidents were discovered. Certain circumstances, such as the time of day, played a role. The concept of a plant, resp. technical process has an essential influence, as well as company policy (importance of safety, preparation of emergency procedures, training, maintenance, company rules) and management (evaluation and realization of foreign and the company's own operation experiences and error alarms). (author) 7

Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 3: Literature surveys and technical reports

Science.gov (United States)

1992-01-01

The technical effort and computer code developed during the first year are summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis.

CONTRIBUTING FACTORS TOWARDS DIFFICULTIES IN GENERATING IDEAS AMONG TECHNICAL STUDENTS

OpenAIRE

Yee Mei Heong

2013-01-01

Idea is a thought or collection of thoughts that are important to decision making and problem solving.  The purpose of this research was to analysis the factors contributing to difficulty in generating ideas among technical students.  A total of 375 technical students from four technical universities in Malaysia were randomly selected as samples.  A set of questionnaires was developed and used as research instrument.  The findings indicated that a total of 319 (85.1%) technical students faced...

Clinical and technical characteristics of intraoperative radiotherapy. Analysis of the ISIORT-Europe database

International Nuclear Information System (INIS)

Krengli, M.; Sedlmayer, F.

2013-01-01

Background: A joint analysis of clinical data from centres within the European section of the International Society of Intraoperative Radiation Therapy (ISIORT-Europe) was undertaken in order to define the range of intraoperative radiotherapy (IORT) techniques and indications encompassed by its member institutions. Materials and methods: In 2007, the ISIORT-Europe centres were invited to record demographic, clinical and technical data relating to their IORT procedures in a joint online database. Retrospective data entry was possible. Results: The survey encompassed 21 centres and data from 3754 IORT procedures performed between 1992 and 2011. The average annual number of patients treated per institution was 42, with three centres treating more than 100 patients per year. The most frequent tumour was breast cancer with 2395 cases (63.8 %), followed by rectal cancer (598 cases, 15.9 %), sarcoma (221 cases, 5.9 %), prostate cancer (108 cases, 2.9 %) and pancreatic cancer (80 cases, 2.1 %). Clinical details and IORT technical data from these five tumour types are reported. Conclusion: This is the first report on a large cohort of patients treated with IORT in Europe. It gives a picture of patient selection methods and treatment modalities, with emphasis on the main tumour types that are typically treated by this technique and may benefit from it. (orig.)

Agent-Based Modeling and Analysis of Socio-Technical Systems

NARCIS (Netherlands)

Sharpanskykh, O.

2011-01-01

Socio-technical systems are characterized by high structural and behavioral complexities, which impede understanding and modeling of such systems. In particular, reciprocal relations between diverse local system processes that determine global system dynamics are not well understood. In this article

Visualizing interdependencies in technical design

NARCIS (Netherlands)

Oosterman, B.J.; Gaalman, G.J.C.; Kuijpers, F.P.J.; Riiahuhta, A.; Pulkkinen, A.

2001-01-01

The control and understanding of complex design processes is an important issue in practice and theory. Recent research shows that documentation and analysis of technical interactions between design tasks (using Design Structure Matrices) gives a thorough understanding of the underlying complex

Superiority of Interferon-Free Regimens for Chronic Hepatitis C

Science.gov (United States)

Younossi, Zobair M.; Stepanova, Maria; Esteban, Rafael; Jacobson, Ira; Zeuzem, Stefan; Sulkowski, Mark; Henry, Linda; Nader, Fatema; Cable, Rebecca; Afendy, Mariam; Hunt, Sharon

2017-01-01

Abstract Patient-reported outcomes (PROs) such as quality of life and work productivity are important for measuring patient's experience. We assessed PROs during and after treatment of hepatitis C virus (HCV) patients. Data were obtained from a phase 3 open label study of sofosbuvir and ribavirin (SOF + RBV) with and without interferon (IFN). Patients completed 4 PRO assessment instruments (SF-36, Functional Assessment of Chronic Illness Therapy—Fatigue, Chronic Liver Disease Questionnaire— HCV, Work Productivity and Activity—Specific Health Problem) before, during, and after treatment. A total of 533 patients with chronic HCV were enrolled; 28.9% treatment-naïve, 23.1% cirrhotic, 219 received IFN + SOF + RBV and 314 received IFN-free SOF + RBV. At baseline, there were no differences in PROs between the IFN-free and IFN-containing treatment arms (all P > 0.05). During treatment, patients receiving IFN + SOF + RBV had a substantial impairment in their PROs (up to −24.4% by treatment week 12, up to −8.3% at week 4 post-treatment). The PRO decrements seen in the SOF + RBV arm were smaller in magnitude (up to −7.1% by treatment week 12), and all returned to baseline or improved by post-treatment week 4. By 12 weeks after treatment cessation, patients who achieved sustained viral response-12 showed some improvement of PRO scores regardless of the regimen (up to +7.1%, P < 0.0001) or previous treatment experience. In multivariate analysis, the use of IFN was independently associated with lower PROs. IFN-based regimens have a profoundly negative impact to PROs. By contrast, the impact of RBV on these PROs is relatively modest. Achieving HCV cure is associated with improvement of most of the PRO scores. PMID:28207507

Superiority of Interferon-Free Regimens for Chronic Hepatitis C: The Effect on Health-Related Quality of Life and Work Productivity.

Science.gov (United States)

Younossi, Zobair M; Stepanova, Maria; Esteban, Rafael; Jacobson, Ira; Zeuzem, Stefan; Sulkowski, Mark; Henry, Linda; Nader, Fatema; Cable, Rebecca; Afendy, Mariam; Hunt, Sharon

2017-02-01

Patient-reported outcomes (PROs) such as quality of life and work productivity are important for measuring patient's experience. We assessed PROs during and after treatment of hepatitis C virus (HCV) patients.Data were obtained from a phase 3 open label study of sofosbuvir and ribavirin (SOF + RBV) with and without interferon (IFN). Patients completed 4 PRO assessment instruments (SF-36, Functional Assessment of Chronic Illness Therapy-Fatigue, Chronic Liver Disease Questionnaire- HCV, Work Productivity and Activity-Specific Health Problem) before, during, and after treatment.A total of 533 patients with chronic HCV were enrolled; 28.9% treatment-naïve, 23.1% cirrhotic, 219 received IFN + SOF + RBV and 314 received IFN-free SOF + RBV. At baseline, there were no differences in PROs between the IFN-free and IFN-containing treatment arms (all P > 0.05). During treatment, patients receiving IFN + SOF + RBV had a substantial impairment in their PROs (up to -24.4% by treatment week 12, up to -8.3% at week 4 post-treatment). The PRO decrements seen in the SOF + RBV arm were smaller in magnitude (up to -7.1% by treatment week 12), and all returned to baseline or improved by post-treatment week 4. By 12 weeks after treatment cessation, patients who achieved sustained viral response-12 showed some improvement of PRO scores regardless of the regimen (up to +7.1%, P < 0.0001) or previous treatment experience. In multivariate analysis, the use of IFN was independently associated with lower PROs.IFN-based regimens have a profoundly negative impact to PROs. By contrast, the impact of RBV on these PROs is relatively modest. Achieving HCV cure is associated with improvement of most of the PRO scores.

TECHNICAL BASIS DOCUMENT FOR NATURAL EVENT HAZARDS

International Nuclear Information System (INIS)

KRIPPS, L.J.

2006-01-01

This technical basis document was developed to support the documented safety analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for natural event hazard (NEH)-initiated accidents. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls

The Intercultural Component in Textbooks for Teaching a Service Technical Writing Course

Science.gov (United States)

Matveeva, Natalia

2007-01-01

This research article investigates new developments in the representation of the intercultural component in textbooks for a service technical writing course. Through textual analysis, using quantitative and qualitative techniques, I report discourse analysis of 15 technical writing textbooks published during 1993-2006. The theoretical and…

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 3:] Technical communications in aeronautics: Results of an exploratory study. An analysis of profit managers' and nonprofit managers' responses

Science.gov (United States)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1989-01-01

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that profit and nonprofit managers in the aerospace community have different technical communications practices. Five assumptions were established for the analysis. Profit and nonprofit managers in the aerospace community were found to have different technical communications practices for one of the five assumptions tested. It was, therefore, concluded that profit and nonprofit managers in the aerospace community do not have different technical communications practices.

Flight Technical Error Analysis of the SATS Higher Volume Operations Simulation and Flight Experiments

Science.gov (United States)

Williams, Daniel M.; Consiglio, Maria C.; Murdoch, Jennifer L.; Adams, Catherine H.

2005-01-01

This paper provides an analysis of Flight Technical Error (FTE) from recent SATS experiments, called the Higher Volume Operations (HVO) Simulation and Flight experiments, which NASA conducted to determine pilot acceptability of the HVO concept for normal operating conditions. Reported are FTE results from simulation and flight experiment data indicating the SATS HVO concept is viable and acceptable to low-time instrument rated pilots when compared with today s system (baseline). Described is the comparative FTE analysis of lateral, vertical, and airspeed deviations from the baseline and SATS HVO experimental flight procedures. Based on FTE analysis, all evaluation subjects, low-time instrument-rated pilots, flew the HVO procedures safely and proficiently in comparison to today s system. In all cases, the results of the flight experiment validated the results of the simulation experiment and confirm the utility of the simulation platform for comparative Human in the Loop (HITL) studies of SATS HVO and Baseline operations.

Technical/institutional prerequisite for nuclear forensics response framework

International Nuclear Information System (INIS)

Tamai, Hiroshi; Okubo, Ayako; Kimura, Yoshiki; Kokaji, Lisa; Shinohara, Nobuo; Tomikawa, Hirofumi

2016-01-01

Nuclear Forensics capability has been developed under the international collaborations. For its effective function, technical development in analysis of seized nuclear materials as well as the institutional development in comprehensive response framework are required under individual national responsibility. In order to keep the “chain of custody” in the proper operation of sample collection at the event scene, radiological analysis at the laboratory, storage of the samples, and further inspection and trial, close cooperation and information sharing between relevant organisations are essential. IAEA issues the Implementing Guide to provide the model action plan and assists individual national development. Some countries at the advancing stage of national response framework, promote the international cooperation for the technical improvement and awareness cultivation. Examples in such national developments will be introduced and prospective technical/institutional prerequisite for nuclear forensics response framework will be studied. (author)

Modeling Technical Change in Energy System Analysis: Analyzing the Introduction of Learning-by-Doing in Bottom-up Energy Models

Energy Technology Data Exchange (ETDEWEB)

Berglund, Christer; Soederholm, Patrik [Luleaa Univ. of Technology (Sweden). Div. of Economics

2005-02-01

The main objective of this paper is to provide an overview and a critical analysis of the recent literature on incorporating induced technical change in energy systems models. Special emphasis is put on surveying recent studies aiming at integrating learning-by-doing into bottom-up energy systems models through so-called learning curves, and on analyzing the relevance of learning curve analysis for understanding the process of innovation and technology diffusion in the energy sector. The survey indicates that this model work represents a major advance in energy research, and embeds important policy implications, not the least concerning the cost and the timing of environmental policies (including carbon emission constraints). However, bottom-up energy models with endogenous learning are also limited in their characterization of technology diffusion and innovation. While they provide a detailed account of technical options - which is absent in many top-down models - they also lack important aspects of diffusion behavior that are captured in top-down representations. For instance, they fail in capturing strategic technology diffusion behavior in the energy sector, and they neglect important general equilibrium impacts (such as the opportunity cost of redirecting R and D support to the energy sector). For these reasons bottom-up and top-down models with induced technical change should not be viewed as substitutes but rather as complements.

Technical standards in the law of technical safety

International Nuclear Information System (INIS)

Marburger, P.

1985-01-01

Technical standards are of great importance for the closer definition of inexact terms of law, for instance ''generally accepted technical rules'', ''state of the art'', ''state of science and technology'' or similar normative terms, in the law of technical safety. The paper discusses with whom the authority for regulating this sector of law rests, deals with the different ways of how technical standards are used by the law (''anticipated expert opinion'', reference to such standards in law and administration) and points out demands on the procedure of standardization. (orig.) [de

Innovative and practical technical development of nuclear energy. Efforts on proposal and recruitment type technical development of nuclear energy

International Nuclear Information System (INIS)

Matsui, Kazuaki; Shioiri, Akio; Hamada, Jun; Kanagawa, Takashi; Mori, Yukihide; Kouno, Koji

2003-01-01

In technical development of nuclear energy conceiving a view on energy environment problem at the 21st Century, technical development on innovative nuclear energy system as well as next generation LWR is an important subject. Even in Japan, on the 'Long-term program for research, development and utilization of nuclear energy (LPRNE)' summarized by the Atomic Energy Commission, investigation on R and Ds of innovative reactors under cooperation of government, industrial field, and universities is required. In the Energy Generalized Engineering Institute, by receiving a subsidy from the Ministry of Economy and Industry since 2000, a proposal recruitment business on innovative and practical technical development of nuclear energy has been carried out. Here were introduced hopeful and unique five themes out of them applied to the recruitment, such as a super-critical pressure water cooling reactor (SCPR), an integrated modular LWR (IMR): technical development for practice, technical development on general purpose boiling transitional analysis method, technical development on direct extraction of U and Pu from consumed fuels based on super-DIREX reprocessing method, and material transfer forecasting in natural barriers at landfill disposal of radioactive wastes. (G.K.)

Comparison of methods applicable to evaluation of nuclear power plant technical specifications

International Nuclear Information System (INIS)

Cho, N.Z.; Bozoki, G.E.; Youngblood, R.W.

1986-01-01

This study compares three probabilistic methods based on the static fault tree analysis, time-dependent unavailability analysis, and Markov analysis, which can be used to evaluate technical specifications in nuclear power plants. They are tested on a sample problem which was devised to closely represent the important and essential characteristics that should be addressed in determination and evaluation of the technical specifications

Illustration of an analytical method for quantification of the safety of technical appliances

International Nuclear Information System (INIS)

Tegel, M.

1981-01-01

The safety analysis of technical products will in future be required more and more also for simple technical systems. The fault-tree analysis is a method for safety judgement used in particular in aviation and space engineering as well as in energy engineering. This analytical method can also be applied to simple technical constructions, as the article shows, using as example an acially rotatable load hook. (orig.) [de

76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2011-10-17

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29, 2011, from 1 p.m. to 5 p.m. and... reliability that were identified in earlier Commission technical conferences. The conference also will discuss...

Rape oil for technical uses - a cost-benefit analysis. A cost-benefit analysis of the production and use of rape oil as fuels and lubricants and for technical purposes

International Nuclear Information System (INIS)

Kleinhanss, W.; Kerckow, B.; Schrader, H.

1992-01-01

A brief description of the methodical fundamentals of cost-benefit analyses, the quantitative analytical models and the relevant data basis is followed by a survey of existing and potential rape oil uses. Basic data for the economic evaluation of rape seed production, rape oil production and rape oil uses are compiled, and the potentials of rape oil marketing in the Federal Republic of Germany are evaluated. The results of an evaluation of the importance of rape oil to the national trade and industry are discussed considering the optimum large-scale expansion of rape oil production, the individual uses, technical concepts, and the economic significance of technical progress. The cost benefit analysis and subsequent evaluation are based on a comparative evaluation of the additional rape oil production and of the grain production which has been giving way to rape production. In accordance with the assumed world market reference conditions rape oil production and rape oil/byproduct uses compete with grain exports at world market prices. The rape oil production costs are estimated applying the marginal costing principle, i.e production costs and follow-up effects are quantified by means of a modified regionally differentiated simulation model assuming the local conditions applicable to the Federal Republic of Germany. Four scenarios for projection of EC agricultural prices, world market prices and energy prices through 2000 are made available to level the different basic economic conditions. (UA) [de

Determination of aims military-technical policy of Ukraine

Directory of Open Access Journals (Sweden)

O. F. Salnikova

2014-06-01

Full Text Available In the article the aims of military-technical policy are considered. Determination of aims (tasks of military-technical policy, its maintenance, requirements to it and directions of its further development it must come true by the analysis of different factors of external and internal environment. Among such factors: geopolitical and military-political position of Ukraine and its military doctrine; realized and operating programs of development (reformation of the soldiery forming and them technical rigging; terms of future military operations and progress of their maintenance, forms, methods and characteristic signs of battle actions trend; substantive provisions of art of war; conceptions, theories and doctrines of battle application of the soldiery forming of the different states; resources dedicated by the state on development of military-technical sphere and others like that. The fundamental chart of sequence of forming of public military-technical policy is presented in the article.

Nuclear Energy Center Site Survey, 1975. Part III. Technical considerations

International Nuclear Information System (INIS)

1976-01-01

Studies of the technical feasibility of nuclear energy centers (NECs) and the comparison between NEC technical feasibility and that of nuclear facilities on dispersed sites are reviewed. The conclusions related to technical feasibility of NEC are summarized. Technical feasibility was found to rest mainly on five major issues: heat dissipation, transmission, facility construction, radiological impact, and environmental impact. Although general conclusions can be reached in these five areas, it is recognized that they are interdependent, and detailed site-by-site analysis will be necessary. Some general conclusions on technical feasibility of NECs are presented, then detailed conclusions derived from the technical evaluation of NECs compared to dispersed site facilities are presented. The findings of this study on each of the five major feasibility issues are then discussed in sequence. The study concludes that nuclear energy centers, as defined herein, are technically feasible

Teaching Technical Writing - Towards Technical Writing

DEFF Research Database (Denmark)

Kastberg, Peter

2000-01-01

In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing.......In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...

Analysis of the Factors Influencing the Technical Efficiency of ...

African Journals Online (AJOL)

The study analyzed the relationship between technical efficiency of women rubber tappers in Rubber Research Institute of Nigeria, Benin City. A total of 60 women were selected through purposive and random sampling techniques and served with a structured interview schedule. Data collected were subjected to ...

Spent nuclear fuel project technical databook

Energy Technology Data Exchange (ETDEWEB)

Reilly, M.A.

1998-07-22

The Spent Nuclear Fuel (SNF) project technical databook provides project-approved summary tables of selected parameters and derived physical quantities, with nominal design and safety basis values. It contains the parameters necessary for a complete documentation basis of the SNF Project technical and safety baseline. The databook is presented in two volumes. Volume 1 presents K Basins SNF related information. Volume 2 (not yet available) will present selected sludge and water information, as it relates to the sludge and water removal projects. The values, within this databook, shall be used as the foundation for analyses, modeling, assumptions, or other input to SNF project safety analyses or design. All analysis and modeling using a parameter available in this databook are required to use and cite the appropriate associated value, and document any changes to those values (i.e., analysis assumptions, equipment conditions, etc). Characterization and analysis efforts are ongoing to validate, or update these values.

Spent nuclear fuel project technical databook

International Nuclear Information System (INIS)

Reilly, M.A.

1998-01-01

The Spent Nuclear Fuel (SNF) project technical databook provides project-approved summary tables of selected parameters and derived physical quantities, with nominal design and safety basis values. It contains the parameters necessary for a complete documentation basis of the SNF Project technical and safety baseline. The databook is presented in two volumes. Volume 1 presents K Basins SNF related information. Volume 2 (not yet available) will present selected sludge and water information, as it relates to the sludge and water removal projects. The values, within this databook, shall be used as the foundation for analyses, modeling, assumptions, or other input to SNF project safety analyses or design. All analysis and modeling using a parameter available in this databook are required to use and cite the appropriate associated value, and document any changes to those values (i.e., analysis assumptions, equipment conditions, etc). Characterization and analysis efforts are ongoing to validate, or update these values

Present and future environmental ''problems'' with SF6 and other fluorinated gases

International Nuclear Information System (INIS)

Brunt, R.J. Van

1996-01-01

Sulfur hexafluoride (SF 6 ) is widely used as an insulating and arc interrupting gas in high-voltage systems and has found application in plasma processing of materials. However, SF 6 is known to decompose in electrical discharges to form toxic and corrosive gaseous compounds such as SOF 4 , SOF 2 , SO 2 F 2 , and HF. Of particular concern are the species S 2 F 10 and S 2 O 2 F 10 that are known to be highly toxic and to be formed in corona, spark, and arc discharges in high-pressure SF 6 . The conditions under which these byproducts are formed, the methods for removal, and the possible hazards that they present are reviewed. Sulfur hexafluoride is also an efficient absorber of infrared radiation and is estimated to have a global warning potential that is 2.5 x 10 4 times greater than that of CO 2 . Methods that have been proposed to control the use of SF 6 and reduce the rate of its release into the atmosphere will be examined. The advantages, disadvantages, and likely problems with finding technically feasible and environmentally acceptable replacements for SF 6 will be discussed

An analysis of Technical Security Control Requirements For Digital I and C Systems in Nuclear Power Plants

International Nuclear Information System (INIS)

Song, Jaegu; Lee, Jungwoon; Park, Geeyong; Kwon, Keechoon; Lee, Dongyoung; Lee, Cheolkwon

2013-01-01

Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system

An analysis of Technical Security Control Requirements For Digital I and C Systems in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Song, Jaegu; Lee, Jungwoon; Park, Geeyong; Kwon, Keechoon; Lee, Dongyoung; Lee, Cheolkwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system.

The Boston Study: Analysis of a Major Metropolitan Business- and Technical-Communication Market.

Science.gov (United States)

Buchholz, William J.

1989-01-01

Presents a year-long study of the duties, skills, and knowledge required of business- and technical-communication professionals in Boston, Massachusetts. Focuses on six categories of practice: technical communication, publishing, public relations, marketing, development, and training. Suggests that in the next decade communication practitioners…

Analysis of Technical Efficiency among Swamp Rice Farmers in ...

African Journals Online (AJOL)

This study was conducted to evaluate the Technical efficiency among swamp rice farmers in Niger State, Nigeria. A multi-stage sampling technique was used to select 159 swamp rice farmers. The data collected were analysed using descriptive statistics, and the stochastic frontier production function. The results showed ...

Technical safety requirements for the Annular Core Research Reactor Facility (ACRRF)

International Nuclear Information System (INIS)

Boldt, K.R.; Morris, F.M.; Talley, D.G.; McCrory, F.M.

1998-01-01

The Technical Safety Requirements (TSR) document is prepared and issued in compliance with DOE Order 5480.22, Technical Safety Requirements. The bases for the TSR are established in the ACRRF Safety Analysis Report issued in compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports. The TSR identifies the operational conditions, boundaries, and administrative controls for the safe operation of the facility

Endogenous induced technical change and the costs of Kyoto

International Nuclear Information System (INIS)

Buonanno, Paolo; Carraro, Carlo; Galeotti, Marzio

2003-01-01

We present a model for climate change policy analysis which accounts for the possibility that technology evolves endogenously and that technical change can be induced by environmental policy measures. Both the output production technology and the emission-output ratio depend upon a stock of knowledge, which accumulates through R and D activities. Two versions of this model are studied, one with endogenous technical change but exogenous environmental technical change and the other with both endogenous and induced technical change. A third version also captures technological spillover effects. As an application, the model is simulated allowing for trade of pollution permits as specified in the Kyoto Protocol and assessing the implications in terms of cost efficiency, economic growth and R and D efforts of the three different specifications of technical change

Technical artifacts in chromatographic analysis of Tc-99m radiopharmaceuticals

International Nuclear Information System (INIS)

Kowalsky, R.J.; Creekmore, J.R.

1982-01-01

Technical artifacts produced during chromatographic analysis of technetium radiopharmaceuticals were investigated. Such artifacts are, we found, caused by improper spotting and drying techniques; these in turn produce spuriously high impurities in Tc-99m complexes of DTPA, MDP, PPi, and GH. The ITLC-SG/acetone system produces considerable streaking of Tc-complex if the applied spot is large and not dried before development. This results in activity in the solvent front portion of the chromatographic strip indicating falsely high levels of pertechnetate impurity. Proper drying of the applied spot eliminates the artifact. The ITLC-SG/saline system yields falsely high, hydrolyzed-reduced technetium impurities if the spot is allowed to enter the solvent during development. Correct spot placement and size eliminate this problem. Strips that are allowed to dry in room air for several minutes may indicate considerable pertechnetate impurity on the chromatogram; yet this may not actually be present in the radiopharmaceutical vial. Drying spots rapidly with hot air or in a nitrogen atmosphere before development eliminates this problem

Sensitivity of Technical Efficiency Estimates to Estimation Methods: An Empirical Comparison of Parametric and Non-Parametric Approaches

OpenAIRE

de-Graft Acquah, Henry

2014-01-01

This paper highlights the sensitivity of technical efficiency estimates to estimation approaches using empirical data. Firm specific technical efficiency and mean technical efficiency are estimated using the non parametric Data Envelope Analysis (DEA) and the parametric Corrected Ordinary Least Squares (COLS) and Stochastic Frontier Analysis (SFA) approaches. Mean technical efficiency is found to be sensitive to the choice of estimation technique. Analysis of variance and Tukey’s test sugge...

Three dimensional visualization breakthrough in analysis and communication of technical information for nuclear waste management

International Nuclear Information System (INIS)

Alexander, D.H.; Cerny, B.A.; Hill, E.R.; Krupka, K.M.; Smoot, J.L.; Smith, D.R.; Waldo, K.

1990-11-01

Computer graphics systems that provide interactive display and manipulation of three-dimensional data are powerful tools for the analysis and communication of technical information required for characterization and design of a geologic repository for nuclear waste. Greater understanding of site performance and repository design information is possible when performance-assessment modeling results can be visually analyzed in relation to site geologic and hydrologic information and engineering data for surface and subsurface facilities. In turn, this enhanced visualization capability provides better communication between technical staff and program management with respect to analysis of available information and prioritization of program planning. A commercially-available computer system was used to demonstrate some of the current technology for three-dimensional visualization within the architecture of systems for nuclear waste management. This computer system was used to interactively visualize and analyze the information for two examples: (1) site-characterization and engineering data for a potential geologic repository at Yucca Mountain, Nevada; and (2) three-dimensional simulations of a hypothetical release and transport of contaminants from a source of radionuclides to the vadose zone. Users may assess the three-dimensional distribution of data and modeling results by interactive zooming, rotating, slicing, and peeling operations. For those parts of the database where information is sparse or not available, the software incorporates models for the interpolation and extrapolation of data over the three-dimensional space of interest. 12 refs., 4 figs

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2013-05-13

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013 from 9:00 a.m. to 5:00 p.m. This... technical support for webcasts and offers the option of listening to the meeting via phone-bridge for a fee...

Divergence in technical efficiency of electric utilities: Evidence from the SAPP

International Nuclear Information System (INIS)

Jaunky, Vishal Chandr

2013-01-01

This paper investigates the convergence pattern of technical efficiency of the South Africa Power Pool (SAPP) utilities over the period April 2003–March 2010 by means of parametric and non-parametric techniques. Technical efficiency scores are computed via both stochastic frontier analysis and data envelopment analysis. Mixed results are obtained from the neoclassical convergence approaches. In addition, distribution dynamics methods reveal some evidence of club-formation and this result is supported with the occurrence of γ-divergence. Taken as a whole, technical efficiency is found to diverge among the utilities operating in the power pool. -- Highlights: •The technical efficiency convergence pattern within the South Africa Power Pool is assessed. •Mixed results are obtained from the parametric neoclassical convergence approaches. •Evidence of divergence is revealed by the non-parametric convergence approaches

Technical quality of root canal treatment performed by undergraduate students using hand instrumentation: a meta-analysis.

Science.gov (United States)

Ribeiro, D M; Réus, J C; Felippe, W T; Pacheco-Pereira, C; Dutra, K L; Santos, J N; Porporatti, A L; De Luca Canto, G

2018-03-01

The technical quality of root canal treatment (RCT) may impact on the outcome. The quality of education received during undergraduate school may be linked to the quality of treatment provided in general dental practice. In this context, the aim of this systematic review was to answer the following focused questions: (i) What is the frequency of acceptable technical quality of root fillings, assessed radiographically, performed by undergraduate students? (ii) What are the most common errors assessed radiographically and reported in these treatments? For this purpose, articles that evaluated the quality of root fillings performed by undergraduate students were selected. Data were collected based on predetermined criteria. The key features from the included studies were extracted. GRADE-tool assessed the quality of the evidence. MAStARI evaluated the methodological quality, and a meta-analysis on all studies was conducted. At the end of the screening, 24 articles were identified. Overall frequency of acceptable technical quality of root fillings was 48%. From this total, 52% related to anterior teeth, 49% to premolars and 26% to molars. The main procedural errors reported were ledge formation, furcation perforation, apical transportation and apical perforation. The heterogeneity amongst the studies was high (84-99%). Five studies had a high risk of bias, eight had a moderate risk, and 11 had low risk. The overall quality of evidence identified was very low. The conclusion was that technical quality of root fillings performed by undergraduate students is low, which may reveal that endodontic education has limited achievement at undergraduate level. A plan to improve the quality of root fillings, and by extrapolation the overall quality of root canal treatment, should be discussed by the staff responsible for endodontic education and training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Technical reference manual for TIME4. Vol. 2

International Nuclear Information System (INIS)

Wilmot, R.D.; Ringrose, P.S.; Larkin, J.P.A.; Kleissen, F.A.T.

1991-07-01

This document is the Technical Reference Manual for the TIME4 model. TIME4 is the environmental change model developed for use in the probabilistic risk analysis of deep disposal of radioactive waste. The Technical Reference Manual describes the theoretical background to the model. The modelling method is described, followed by a review of related work and a detailed description for each sub-model. (author)

Analysis Method of Combine Harvesters Technical Level by Functional and Structural Parameters

Directory of Open Access Journals (Sweden)

E. V. Zhalnin

2018-01-01

Full Text Available The analysis of modern methods of evaluation of the grain harvesters technical level revealed a discrepancy in various criteria: comparative parameters, dimensionless series, the names of firms, the power of the motor, the width of the capture of the harvester, the capacity at the location of the manufacturer plant, advertising brands. (Purpose of research This led to a variety in the name of harvester models, which significantly complicates the assessment of their technical level, complicates the choice of agricultural necessary to him fashion, does not give the perception of the continuity of the change of generations of combines, makes it impossible to analyze trends in their development, does not disclose the technological essence of a model, but - most importantly - combines can not be compared with each other. The figures in the name of the harvester model are not related functionally to the main parameters and performance capabilities. (Materials and methods The close correlation in the form of a linear equation between their design parameters and the capacity of combines was revealed. Verification of this equation in the process of operation of the combine showed that it statistically stable and the estimates are always within the confidence interval with an error of 5-8 percent. It was found that four parameters of the variety of factors, that affect the performance of the harvester per hour net time, having most close correlation with it are: the motor power and the square of the separation concave, straw walkers and sieves for cleaning. (Results and discussion On the basis of the revealed correlation dependence we proposed a new method of assessment of the technical level of combines, which is based on the throughput (kg/s of the wetted material and the size series, indicating the nominal productivity of the combine in centners of grain harvested in 1 hour of basic time. The methodological background and mathematical apparatus

Safety of Sofosbuvir and Ribavirin Combination Therapy in a Patient Who Developed Anemia due to Ribavirin

Directory of Open Access Journals (Sweden)

Hirokazu Suii

2017-01-01

Full Text Available Interferon (IFN and ribavirin (RBV combination therapy was previously the standard of care for treatment of hepatitis C virus (HCV genotype 2 infection. But, it often induced hemolytic anemia. In 2014, sofosbuvir (SOF was approved for the treatment of chronic HCV genotype 2 in Japan. SOF/RBV therapy is more effective against genotype 2 than IFN/RBV therapy. We report a case of a 74-year-old woman with chronic HCV genotype 2b infection. She received five treatments including RBV and IFN therapy before SOF was approved and all of them were ineffective. Therapies that included RBV induced severe anemia and led to discontinuation of treatment. With pegylated IFN/RBV therapy, the maximum change in hemoglobin (Hb from baseline was −3.7 g/dL. However, SOF/RBV therapy was effective and she achieved sustained virologic response (SVR with a maximum change in Hb from baseline of only −1.2 g/dL. We also found reticulocyte count was very low during treatment in this case and speculate it was one of the reasons that she developed hemolytic anemia with RBV. In conclusion, SOF/RBV therapy is effective and allowed the patient to achieve SVR. An SOF/RBV regimen is safe and effective for patients who have or are at risk of anemia induced by RBV.

Full immersion simulation: validation of a distributed simulation environment for technical and non-technical skills training in Urology.

Science.gov (United States)

Brewin, James; Tang, Jessica; Dasgupta, Prokar; Khan, Muhammad S; Ahmed, Kamran; Bello, Fernando; Kneebone, Roger; Jaye, Peter

2015-07-01

To evaluate the face, content and construct validity of the distributed simulation (DS) environment for technical and non-technical skills training in endourology. To evaluate the educational impact of DS for urology training. DS offers a portable, low-cost simulated operating room environment that can be set up in any open space. A prospective mixed methods design using established validation methodology was conducted in this simulated environment with 10 experienced and 10 trainee urologists. All participants performed a simulated prostate resection in the DS environment. Outcome measures included surveys to evaluate the DS, as well as comparative analyses of experienced and trainee urologist's performance using real-time and 'blinded' video analysis and validated performance metrics. Non-parametric statistical methods were used to compare differences between groups. The DS environment demonstrated face, content and construct validity for both non-technical and technical skills. Kirkpatrick level 1 evidence for the educational impact of the DS environment was shown. Further studies are needed to evaluate the effect of simulated operating room training on real operating room performance. This study has shown the validity of the DS environment for non-technical, as well as technical skills training. DS-based simulation appears to be a valuable addition to traditional classroom-based simulation training. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

The safety and efficacy of ledipasvir/sofosbuvir with or without ribavirin in the treatment of orthotopic liver transplant recipients with recurrent hepatitis C: real-world data.

Science.gov (United States)

Pyrsopoulos, Nikolaos; Trilianos, Panagiotis; Lingiah, Vivek A; Fung, Phoenix; Punnoose, Merlin

2018-07-01

Recurrent hepatitis C (RHC) in orthotopic liver transplantation (OLT) population is associated with accelerated rates of fibrosis, low efficacy and decreased tolerability with traditional therapies. The aim of this study was to evaluate the safety and efficacy of ledipasvir/sofosbuvir (LED/SOF) with or without ribavirin (RBV) in OLT patients with RHC. Patients at least 3 months post-OLT and with documented RHC were treated with LED/SOF with or without RBV for either 12 or 24 weeks. End-of-treatment and sustained virological response 12 weeks after the completion of treatment were documented. Patients were closely monitored for treatment-related adverse effects and the potential need for adjustment in their immunosuppression. Seventy-one patients were included in the study. Median age was 62 years. Median time from OLT was 55 months. Twenty-six (36.6%) patients were treatment-naive and 45 (63.4%) had previously failed interferon-based therapies. The majority of patients (57.7%) had stage F0-F2 fibrosis. Sixty-seven (94.3%) patients completed 12 weeks of LED/SOF with RBV, three patients completed 12 or 24 weeks of LED/SOF without RBV, and one patient completed only 8 weeks of LED/SOF without RBV owing to severe allograft dysfunction. Sustained virological response was near universal in our cohort (98.5%) regardless of genotype, fibrosis stage, and regimen or treatment duration. Most commonly reported side effects were malaise and gastrointestinal upset. No patient required adjustment in immunosuppression and no episodes of rejection were documented during treatment. The combination of LED/SOF with RBV for 12 weeks or LED/SOF for 24 weeks is very effective and safe in treating OLT recipients with RHC.

Cost-effectiveness of combination daclatasvir-sofosbuvir for treatment of genotype 3 chronic hepatitis C infection in the United States.

Science.gov (United States)

Saint-Laurent Thibault, Catherine; Moorjaney, Divya; Ganz, Michael L; Sill, Bruce; Hede, Shalini; Yuan, Yong; Gorsh, Boris

2017-07-01

A phase III trial evaluated the efficacy and safety of Daklinza (daclatasvir or DCV) in combination with sofosbuvir (SOF) for treatment of genotype (GT) 3 hepatitis C virus (HCV) patients. This study evaluated the cost-effectiveness of DCV + SOF vs SOF in combination with ribavirin (RBV) over a 20-year time horizon from the perspective of a United States (US) payer. A published Markov model was adapted to reflect US demographic characteristics, treatment patterns, costs of drug acquisition, monitoring, disease and adverse event management, and mortality risks. Clinical inputs came from the ALLY-3 and VALENCE trials. The primary outcome was the incremental cost-utility ratio. Life-years, incidence of complications, number of patients achieving sustained virological response (SVR), and the total cost per SVR were secondary outcomes. Costs (2014 USD) and quality-adjusted life years (QALYs) were discounted at 3% per year. Deterministic, probabilistic, and scenario sensitivity analyses were conducted. DCV + SOF was associated with lower costs and better effectiveness than SOF + RBV in the base case and in almost all scenarios (i.e. treatment-experienced, non-cirrhotic, time horizons of 5, 10, and 80 years). DCV + SOF was less costly, but also slightly less effective than SOF + RBV in the cirrhotic and treatment-naïve population scenarios. Results were sensitive to variations in the probability of achieving SVR for both treatment arms. DCV + SOF costs less than $50,000 per QALY gained in 79% of all probabilistic iterations compared with SOF + RBV. DCV + SOF is a dominant option compared with SOF + RBV in the US for the overall GT 3 HCV patient population.

Technical and economic analysis of driling and blasting parameters in the process of excavation in the limestone quarry 'Dobrnja' near Banja Luka

Directory of Open Access Journals (Sweden)

Kovačević Žarko D.

2017-01-01

Full Text Available Although the significance of the technical aspects of the mining industry can not be ignored, narrow focus only on technical issues is no longer enough to guarantee economic success, even in the richest ore bodies. On this way results of the economic analysis of particular technological stages of exploitation are an important parameter of productivity and efficiency of the whole exploitation process. This paper presents a model of the economic evaluation of different variants of drilling and blasting, and analyzing the results obtained with the consideration of all the cost of drilling and blasting operation defined in the process of specific grain size production. This is followed by the selection of technically and economically optimal variant of this technological operations in the mineral raw materials exploitation.

Treatment of Race/Ethnicity in Career-Technical Education Research

Science.gov (United States)

Rojewski, Jay W.; Xing, Xue

2013-01-01

This study examined how researchers of career-technical education have treated the construct of race/ethnicity in recent studies. Fifty-one of 71 articles published in the Career and Technical Education Research (CTER) over a 7-year span (2005-2011) were included. A content analysis found that only one quarter (n = 13, 25.49%) of eligible studies…

Resistance Analyses of Japanese Hepatitis C-Infected Patients Receiving Sofosbuvir or Ledipasvir/Sofosbuvir Containing Regimens in Phase 3 Studies.

Science.gov (United States)

Mizokami, M; Dvory-Sobol, H; Izumi, N; Nishiguchi, S; Doehle, B; Svarovskaia, E S; De-Oertel, S; Knox, S; Brainard, D M; Miller, M D; Mo, H; Sakamoto, N; Takehara, T; Omata, M

2016-10-01

High rates of sustained virologic response (SVR) has been achieved in Japanese patients with chronic hepatitis C virus (HCV) genotype (GT)1 and GT2 infection treated with ledipasvir/sofosbuvir (LDV/SOF) ±ribavirin (RBV) and SOF+RBV, respectively. We evaluated the effect of baseline HCV NS5A and NS5B resistance-associated variants (RAVs) on treatment outcome and characterized variants at virologic failure. Baseline deep sequencing for NS5A and NS5B genes was performed for all GT1 patients. Deep sequencing of NS5A (GT1 only) and NS5B (GT1 and GT2) was performed for patients who failed treatment or discontinued early with detectable HCV RNA (i.e., >25 IU/mL). In patients with HCV GT1 infection, 22.3% (GT1a: 2/11; GT1b: 74/330) had ≥1 baseline NS5A RAV. The most frequent NS5A RAVs in GT1b were Y93H (17.9%, 59/330) and L31M (2.4%, 8/330). Despite the presence of NS5A RAVs at baseline, 100% and 97% of patients achieved SVR12, compared with 100% and 99% for those with no NS5A RAVs with LDV/SOF and LDV/SOF+RBV, respectively. All patients with NS5B RAVs at baseline achieved SVR12. Of the 153 patients with GT2 infection (GT2a 60.1%, GT2b 39.9%), 3.3% (5/153) experienced viral relapse. No S282T or other NS5B RAVs were detected at baseline or relapse; no change in susceptibility to SOF or RBV was observed at relapse. In conclusion, LDV/SOF and SOF+RBV demonstrate a high barrier to resistance in Japanese patients with HCV GT1 and GT2 infection. The presence of baseline NS5A RAVs did not impact treatment outcome in GT1 Japanese patients treated with LDV/SOF for 12 weeks. © 2016 John Wiley & Sons Ltd.

Ledipasvir/sofosbuvir for treatment of hepatitis C virus in sofosbuvir-experienced, NS5A treatment-naïve patients: Findings from two randomized trials.

Science.gov (United States)

Tam, Edward; Luetkemeyer, Anne F; Mantry, Parvez S; Satapathy, Sanjaya K; Ghali, Peter; Kang, Minhee; Haubrich, Richard; Shen, Xianlin; Ni, Liyun; Camus, Gregory; Copans, Amanda; Rossaro, Lorenzo; Guyer, Bill; Brown, Robert S

2018-06-01

We report data from two similarly designed studies that evaluated the efficacy, safety, and optimal duration of ledipasvir/sofosbuvir (LDV/SOF) ± ribavirin (RBV) for retreatment of chronic hepatitis C virus (HCV) in individuals who failed to achieve sustained virological response (SVR) with prior SOF-based, non-NS5A inhibitor-containing regimens. The RESCUE study enrolled HCV mono-infected adults with genotype (GT) 1 or 4. Non-cirrhotic participants were randomized to 12 weeks of LDV/SOF or LDV/SOF + RBV. Compensated cirrhotic participants were randomized to LDV/SOF + RBV (12 weeks) or LDV/SOF (24 weeks). The AIDS Clinical Trials Group A5348 study randomized genotype 1 adults with HCV/HIV co-infection to LDV/SOF + RBV (12 weeks) or LDV/SOF (24 weeks). Both studies used SVR at 12 weeks post-treatment (SVR12) as the primary endpoint. In the RESCUE study, 82 participants were randomized and treated, and all completed treatment. Overall, SVR12 was 88% (72/82); 81-100% in non-cirrhotic participants treated with LDV/SOF or LDV/SOF + RBV for 12 weeks and 80-92% in cirrhotic participants treated with LDV/SOF + RBV for 12 weeks or LDV/SOF for 24 weeks. Adverse events (AEs), mostly mild-to-moderate in severity, were experienced by 78% of participants, with headache and fatigue most frequently reported. One serious AE, not related to treatment, was observed. No premature discontinuations of study drug, or deaths occurred. In the A5348 study, seven participants were randomized (cirrhotic n = 1; GT1a n = 5) and all attained SVR12, with no serious AEs or premature discontinuations. In this SOF-experienced, NS5A inhibitor-naïve population, which included participants with cirrhosis or HCV/HIV co-infection, high SVR12 rates were achieved. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Technical guide to criticality alarm system design

International Nuclear Information System (INIS)

Greenfield, B.

2009-01-01

An instructional manual was created to guide criticality safety engineers through the technical aspects of designing a criticality alarm system (CAS) for Dept. of Energy (DOE) hazard class 1 and 2 facilities. The manual was structured such that it can be used by engineers designing completely new systems and by those who are working with existing facilities. Major design tasks are thoroughly analyzed to provide concise direction for how to complete the analysis. Regulatory and technical performance requirements were both addressed. (authors)

Technical database and management system (DBMS) for the UMTRA project processing sites

International Nuclear Information System (INIS)

Hillman, R.L.; Mohr, D.E.

1985-01-01

The technical DBMS is a structured and organized method for collecting, storing, retrieving, and analyzing technical data based upon standard operating procedures and quality control measures. The automated environment created by this design exists both as a repository for processing site technical data and the analysis techniques used against this data for site characterization, evaluation, and design. The system is composed of diverse technical subjects that are collectively used to address remedial action problems associated with mill tailings disposal. These technical subjects include hydrology, geology, geochemistry, radiology, and engineering

Exploring the relationship between anaesthesiologists' non-technical and technical skills.

Science.gov (United States)

Gjeraa, K; Jepsen, R M H G; Rewers, M; Østergaard, D; Dieckmann, P

2016-01-01

A combination of non-technical skills (NTS) and technical skills (TS) is crucial for anaesthetic patient management. However, a deeper understanding of the relationship between these two skills remains to be explored. We investigated the characteristics of trainee anaesthesiologists' NTS and TS in a simulated unexpected difficult airway management scenario. A mixed-method approach was used to explore the relationship between NTS and TS in 25 videos of 2nd year trainee anaesthesiologists managing a simulated difficult airway scenario. The videos were assessed using the customised version of the Anaesthetists' Non-Technical Skills System, ANTSdk, and an adapted TS checklist for calculating the correlation between NTS and TS. Written descriptions of the observed NTS were analysed using directed content analysis. The correlation between the NTS and the TS ratings was 0.106 (two-tailed significance of 0.613). Inter-rater reliability was substantial. Themes characterising good NTS included a systematic approach, planning and communicating decisions as well as responding to the evolving situation. A list of desirable, concrete NTS for the specific airway management situation was generated. This study illustrates that anaesthesiologist trainees' NTS and TS were not correlated in this setting, but rather intertwined and how the interplay of NTS and TS can impact patient management. Themes describing the characteristics of NTS and a list of desirable, concrete NTS were developed to aid the understanding, training and use of NTS. © 2015 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Hydrogen Technical Analysis -- Dissemination of Information

Energy Technology Data Exchange (ETDEWEB)

George Kervitsky, Jr.

2006-03-20

SENTECH is a small energy and environmental consulting firm providing technical, analytical, and communications solutions to technology management issues. The activities proposed by SENTECH focused on gathering and developing communications materials and information, and various dissemination activities to present the benefits of hydrogen energy to a broad audience while at the same time establishing permanent communications channels to enable continued two-way dialog with these audiences in future years. Effective communications and information dissemination is critical to the acceptance of new technology. Hydrogen technologies face the additional challenge of safety preconceptions formed primarily as a result of the crash of the Hindenburg. Effective communications play a key role in all aspects of human interaction, and will help to overcome the perceptual barriers, whether of safety, economics, or benefits. As originally proposed SENTECH identified three distinct information dissemination activities to address three distinct but important audiences; these formed the basis for the task structure used in phases 1 and 2. The tasks were: (1) Print information--Brochures that target the certain segment of the population and will be distributed via relevant technical conferences and traditional distribution channels. (2) Face-to-face meetings--With industries identified to have a stake in hydrogen energy. The three industry audiences are architect/engineering firms, renewable energy firms, and energy companies that have not made a commitment to hydrogen (3) Educational Forums--The final audience is students--the future engineers, technicians, and energy consumers. SENTECH will expand on its previous educational work in this area. The communications activities proposed by SENTECH and completed as a result of this cooperative agreement was designed to compliment the research and development work funded by the DOE by presenting the technical achievements and validations

Technical design issues for a field-portable supercritical fluid extractor

Energy Technology Data Exchange (ETDEWEB)

Wright, B.W.; Zemanian, T.S.; Robins, W.H.; Wright, C.W.

1995-01-01

Supercritical fluid extraction is gaining acceptance as an alternative sample preparation method for trace organic analysis. The development of SFE instrumentation optimized for field use requires taking several technical design issues including size and weight requirements, user-friendly operation, and technical performance capabilities into consideration. Parameters associated with a prototype SFE instrument under development for potential use in conducting on-site inspections of the Chemical Weapons Convention and its preliminary technical and operational performance are described.

A stochastic frontier analysis of technical efficiency in smallholder maize production in Zimbabwe: The post-fast-track land reform outlook

Directory of Open Access Journals (Sweden)

Nelson Mango

2015-12-01

Full Text Available This article analyses the technical efficiency of maize production in Zimbabwe’s smallholder farming communities following the fast-track land reform of the year 2000 with a view of highlighting key entry points for policy. Using a randomly selected sample of 522 smallholder maize producers, a stochastic frontier production model was applied, using a linearised Cobb–Douglas production function to determine the production elasticity coefficients of inputs, technical efficiency and the determinants of efficiency. The study finds that maize output responds positively to increases in inorganic fertilisers, seed quantity, the use of labour and the area planted. The technical efficiency analysis suggests that about 90% of farmers in the sample are between 60 and 75% efficient, with an average efficiency in the sample of 65%. The significant determinants of technical efficiency were the gender of the household head, household size, frequency of extension visits, farm size and the farming region. The results imply that the average efficiency of maize production could be improved by 35% through better use of existing resources and technology. The results highlight the need for government and private sector assistance in improving efficiency by promoting access to productive resources and ensuring better and more reliable agricultural extension services.

THE USE OF THE PATENT ANALYSIS METHOD FOR FINDING ANALOGUES AND PROTOTYPES OF RECEIVED TECHNICAL SOLUTIONS

Directory of Open Access Journals (Sweden)

Irina Petrova

2016-03-01

Full Text Available The research deals with the issue of the patent analysis efficiency, which is a necessary stage of seaching analogues and prototypes to obtain technical solutions. The article presents the results of analyzing the present automation systems for finding necessary information in the patent databases and identifies their advantages and disadvantages. It gives a description of the “Intellect” system, which is an example of software systems for the conceptual design stage support. Materials and Methods The article presents some of the possible ways to organize the patents-analogues search process and specific features of searching analogues and prototypes for the generated parametric structure scheme of the technical solution, which is the result of the synthesis of a new information-measuring and control system element in the “Intellect” system. The description of the proposed search query forming method is given. The article gives the structure of the patent passport, which must be stored in a database to organize the process of searcing analogues and prototypes. There given a description of algorithms for automatic adding a patent to the database, recalculating the weights while adding a patent by experts, identifying the fact of using different physical and technical effects in a patent. Results The final part of the article contains an example of the results of testing the developed subsystem implementing the proposed method. According to the test results it is concluded that the selected software and algorithmic solutions are effective.

Intelligent Prediction of Soccer Technical Skill on Youth Soccer Player's Relative Performance Using Multivariate Analysis and Artificial Neural Network Techniques

OpenAIRE

Abdullah, M. R; Maliki, A. B. H. M; Musa, R. M; Kosni, N. A; Juahir, H

2016-01-01

This study aims to predict the potential pattern of soccer technical skill on Malaysia youth soccer players relative performance using multivariate analysis and artificial neural network techniques. 184 male youth soccer players were recruited in Malaysia soccer academy (average age = 15.2±2.0) underwent to, physical fitness test, anthropometric, maturity, motivation and the level of skill related soccer. Unsupervised pattern recognition of principal component analysis (PCA) was used to ident...

Colonialism and Secondary Technical Education in Hong Kong: 1945-1997

Science.gov (United States)

Lau, Wai Wah; Kan, Flora

2011-01-01

This study examines the influence of the colonial experience (1945-1997) on the planning of secondary technical education in Hong Kong. Specifically, the origins of secondary technical institutions and their positioning in secondary education are examined. Primary source materials are used as the basis of investigation and analysis, supplemented…

The Role of Special Operations Forces in Information Warfare: Enablers, Not Cyber Warriors

National Research Council Canada - National Science Library

Edgar, Jeffry

2000-01-01

... (IW) - is not unique to SOF. Conventional forces also execute IW. As a result, SOF runs the risk of losing its unique character as it tries to assume a role that conventional forces can fulfill...

Technical and economic viability of automated highway systems : preliminary analysis

Science.gov (United States)

1997-01-01

Technical and economic investigations of automated highway systems (AHS) are addressed. It has generally been accepted that such systems show potential to alleviate urban traffic congestion, so most of the AHS research has been focused instead on tec...

Linked-cone DEA profit ratios and technical efficiency with application to Illinois coal mines

Energy Technology Data Exchange (ETDEWEB)

Thompson, R.G.; Dharmapala, P.S.; Thrall, R.M. [University of Houston, Houston, TX (United States). Dept. of Decision and Information Sciences

1995-04-01

The authors develop a theory stating that Data Envelopment Analysis (DEA) profit ratios and technical efficiency measures require separate treatment. This point is illustrated by analysis of an example problem; showing that DEA technical efficiency does not necessarily imply a DEA maximum profit ratio; and that a DEA maximum profit ratio does not necessarily imply DEA technical efficiency. The mathematical framework underlying this argument is provided. Application of the concepts to Illinois coal mining data lends support to the need for separate treatment of DEA technical efficiency and DEA profit ratios. 31 refs., 4 figs., 9 tabs.

Linked-cone DEA profit ratios and technical efficiency with application to Illinois coal mines

International Nuclear Information System (INIS)

Thompson, R.G.; Dharmapala, P.S.; Thrall, R.M.

1995-01-01

The authors develop a theory stating that Data Envelopment Analysis (DEA) profit ratios and technical efficiency measures require separate treatment. This point is illustrated by analysis of an example problem; showing that DEA technical efficiency does not necessarily imply a DEA maximum profit ratio; and that a DEA maximum profit ratio does not necessarily imply DEA technical efficiency. The mathematical framework underlying this argument is provided. Application of the concepts to Illinois coal mining data lends support to the need for separate treatment of DEA technical efficiency and DEA profit ratios. 31 refs., 4 figs., 9 tabs

TECHNICAL FEATURES OF RIGGED YACHT BY CATEGORIES AND CLASSES

Directory of Open Access Journals (Sweden)

Svitlana Yeroshkina

2016-06-01

Full Text Available The article is directed on the deeply meaningful scientific study and structural analysis of the technical features of the rigged world modern yachts to pass sailing regattas in different navigation areas. The complete classification of sailing boats in it’s world classes was done for olympic, international, national regattas. It was done the technical indicators of yachting racing classes. The economic analysis material selection sails for yachts are directed of different types of races. In it’s scientific article is made economic calculation of operating cost of the boat and it was done the analysis of cost saving yachts in european / ukrainian marinas.Key words: yachting, rigged yacht, racing, classes of yachts. JEL: L 92

Technical Support Essentials Advice to Succeed in Technical Support

CERN Document Server

Sanchez, Andrew

2010-01-01

Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

Science.gov (United States)

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Book Review: New Perspectives on Technical Editing

Science.gov (United States)

Murphy, A. J. (Ed.); Sterken, Christiaan

2012-08-01

New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

Evaluation model of commercial geological exploration and mining development project and analysis of some technical problems in commercial negotiation

International Nuclear Information System (INIS)

Yao Zhenkai

2012-01-01

A composite evaluation model of commercial geological exploration and mining development project was discussed, this new model consists of polity-economy-technique (PET) synthetic evaluation sub-model and geology-mining-metallurgy (GMM) technique evaluation sub-model. Besides, some key technical problems in commercial negotiation, such as information screening, quoted price and analysis of deadline, were briefly analyzed. (author)

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

An analysis of the major challenges and obstacles for international technical cooperation in health, Brazil-Mozambique.

Science.gov (United States)

Pereira, Eduardo Mazzaroppi Barao

2017-07-01

Health has become a priority issue on the agenda in relation to Brazilian international technical cooperation in the last decade. This applies to Mozambique which is a strategic partner of Brazil's when one takes into consideration the volume of projects that have been undertaken between the two countries and the available resources on offer. There has been a shift in the foreign policy paradigm which has resulted in a new Brazilian foreign policy posture that promotes bilateral agreements and international cooperation. On conducting a retrospective and current analysis it is clear that there are, however, major obstacles and challenges for bilateral agreements and technical international cooperation that require in-depth study and which need to be dealt with in the area of health. This paper seeks to identify and analyze these obstacles with a view to providing proposals for ways forward. It takes the approach of using the methodology of reviewing specialized journals on this topic as well as using qualitative research from the main actors and institutions involved in bilateral cooperation.

Technical efficiency of selected hospitals in Eastern Ethiopia.

Science.gov (United States)

Ali, Murad; Debela, Megersa; Bamud, Tewfik

2017-12-01

This study examines the relative technical efficiency of 12 hospitals in Eastern Ethiopia. Using six-year-round panel data for the period between 2007/08 and 2012/13, this study examines the technical efficiency, total factor productivity, and determinants of the technical inefficiency of hospitals. Data envelopment analysis (DEA) and DEA- based Malmquist productivity index used to estimate relative technical efficiency, scale efficiency, and total factor productivity index of hospitals. Tobit model used to examine the determinants of the technical inefficiency of hospitals. The DEA Variable Returns to Scale (VRS) estimate indicated that 6 (50%), 5 (42%), 3 (25%), 3 (25%), 4 (33%), and 3 (25%) of the hospitals were technically inefficient while 9 (75%), 9 (75%), 7 (58%), 7 (58%), 7 (58%) and 8 (67%) of hospitals were scale inefficient between 2007/08 and 2012/13, respectively. On average, Malmquist Total Factor Productivity (MTFP) of the hospitals decreased by 3.6% over the panel period. The Tobit model shows that teaching hospital is less efficiency than other hospitals. The Tobit regression model further shows that medical doctor to total staff ratio, the proportion of outpatient visit to inpatient days, and the proportion of inpatients treated per medical doctor were negatively related with technical inefficiency of hospitals. Hence, policy interventions that help utilize excess capacity of hospitals, increase doctor to other staff ratio, and standardize number of inpatients treated per doctor would contribute to the improvement of the technical efficiency of hospitals.

The fluctuations of China’s energy intensity: Biased technical change

International Nuclear Information System (INIS)

Wang, Ce; Liao, Hua; Pan, Su-Yan; Zhao, Lu-Tao; Wei, Yi-Ming

2014-01-01

Highlights: • Biased technical change is considered in the adjusting the input–output tables. • The level of biased technical change is determined by TFP and energy efficiency. • The increase in energy intensity was mostly attributed to the structural change. • The changes in the production technology actually decreased the energy intensity. • The decomposition results are sensitive to the level of biased technical change. - Abstract: The fluctuations of China’s energy intensity have attracted the attention of many scholars, but fewer studies consider the data quality of official input–output tables. This paper conducts a decomposition model by using the Divisia method based on the input–output tables. Because of the problems with input–output tables and price deflators, we first produce constant prices to deflate the input–output tables. And then we consider different levels of biased technical change for different sectors in the adjusting the input–output table. Finally, we use RAS technique to adjust input–output matrix. Then the decomposition model is employed to empirically analyze the change of China’s energy intensity. We compare the decomposition results with and without biased technical change and do sensitive analysis on the level of biased technical change. The decomposition results are that during 2002–2007, the energy intensity of coal and electricity increased, the changes were mostly attributed to the structural change and the contribution was 594.08%, 73.88%, respectively; as for crude oil and refined oil, the energy intensity decreased, the changes were mostly attributed to the changes in the production technology and the contribution was 978.89%, 246.95%, respectively. And the results of sensitive analysis shows that 1% variation of the level of biased technical change will cause at most 0.6% change of decomposition results. Therefore, we can draw our conclusions: compared to the decomposition without biased technical

Handbook of technical diagnostics fundamentals and application to structures and systems

CERN Document Server

2013-01-01

This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and r...

Cluster analysis of residential heat load profiles and the role of technical and household characteristics

DEFF Research Database (Denmark)

Carmo, Carolina; Christensen, Toke Haunstrup

2016-01-01

of the temporality of the energy demand is needed. This paper contributes to this by focusing on the daily load profiles of energy demand for heating of Danish dwellings with heat pumps. Based on hourly recordings from 139 dwellings and employing cluster and regression analysis, the paper explores patterns...... (typologies) in daily heating load profiles and how these relate to socio-economic and technical characteristics of the included households. The study shows that the load profiles vary according to the external load conditions. Two main clusters were identified for both weekdays and weekends and across load...

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

Science.gov (United States)

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

Handbook of methods for risk-based analysis of technical specification requirements

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.

1994-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: Quantitatively evaluate the risk and justify changes based on objective risk arguments; Provide a defensible basis for these requirements for regulatory applications. The US NRC Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

Handbook of methods for risk-based analysis of Technical Specification requirements

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.

1993-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: quantitatively evaluate the risk impact and justify changes based on objective risk arguments. Provide a defensible basis for these requirements for regulatory applications. The United States Nuclear Regulatory Commission (USNRC) Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

Combining technical and organisational elements in layer of protection analysis

NARCIS (Netherlands)

Boers, M.N.; Gort, J.; Versloot, N.H.A.

2005-01-01

Traditionally, in process industry, risks are reduced with technical solutions and organisational measures. The performance of both types of "solutions" depends on many factors and can not easily be compared. Especially the effectiveness of organisational measures such as the use of procedures,

Sense of community and its relationship with walking and neighborhood design.

Science.gov (United States)

Wood, Lisa; Frank, Lawrence D; Giles-Corti, Billie

2010-05-01

The aim of this study is to examine the association between sense of community, walking, and neighborhood design characteristics. The current study is based on a sub-sample of participants (n=609) from the US Atlanta SMARTRAQ study who completed a telephone survey capturing physical activity patterns, neighborhood perceptions, and social interactions. Objective measures of neighborhood form were also computed. Univariate and multivariate models (General Linear Models (GLM)) were used to examine the association between sense of community (SofC) and aspects of the built environment, physical activity, and neighborhood perceptions. In multivariate models the impact on SofC was examined with progressive adjustment for demographics characteristics followed by walking behavior, neighborhood design features, neighborhood perceptions and time spent traveling in a car. After adjustment, SofC was positively associated with leisurely walking (days/week), home ownership, seeing neighbors when walking and the presence of interesting sites. SofC was also associated with higher commercial floor space to land area ratios (FAR) - a proxy for walkable site design that captures the degree to which retail destinations are set back from the street, the amount of surface parking, and urban design of an area. Conversely the presence of more mixed use and perceptions of steep hills were inversely associated with SofC. SofC is enhanced by living in areas that encourage leisurely walking, hence it is associated with living in neighbourhoods with lower levels of land use mix, but higher levels of commercial FAR. Our results suggest that in terms of SofC, the presence of commercial destinations may inhibit social interaction among local residents unless urban design is used to create convivial pedestrian-friendly commercial areas, e.g., providing street frontage, rather than flat surface parking. This finding has policy implications and warrants further investigation. Copyright 2010 Elsevier

Funding for the 2ND IAEA technical meeting on fusion data processing, validation and analysis

Energy Technology Data Exchange (ETDEWEB)

Greenwald, Martin

2017-06-02

The International Atomic Energy Agency (IAEA) will organize the second Technical Meeting on Fusion Da Processing, Validation and Analysis from 30 May to 02 June, 2017, in Cambridge, MA USA. The meeting w be hosted by the MIT Plasma Science and Fusion Center (PSFC). The objective of the meeting is to provide a platform where a set of topics relevant to fusion data processing, validation and analysis are discussed with the view of extrapolation needs to next step fusion devices such as ITER. The validation and analysis of experimental data obtained from diagnostics used to characterize fusion plasmas are crucial for a knowledge based understanding of the physical processes governing the dynamics of these plasmas. The meeting will aim at fostering, in particular, discussions of research and development results that set out or underline trends observed in the current major fusion confinement devices. General information on the IAEA, including its mission and organization, can be found at the IAEA websit Uncertainty quantification (UQ) Model selection, validation, and verification (V&V) Probability theory and statistical analysis Inverse problems & equilibrium reconstru ction Integrated data analysis Real time data analysis Machine learning Signal/image proc essing & pattern recognition Experimental design and synthetic diagnostics Data management

Planning for success: desired characteristics of special operations surgeons, a pilot study.

Science.gov (United States)

Campbell, Barrett H; Alderman, Shawn M

2012-01-01

Selection criteria for Special Operations Forces (SOF) physicians are often unclear to potential candidates without prior SOF experience. To date, no published career resource exists to guide the careers of physicians interested in becoming a SOF surgeon. Using a survey tool, desirable characteristics and personal attributes were identified that can be used to inform candidate career decisions and better prepare them for a future position in Special Operations. A descriptive, cross-sectional survey instrument was developed and distributed to current Army SOF Command Surgeons for further distribution to subordinate surgeons. RESULTS were analyzed as a cohort and by subordinate command. Respondents consisted of current SOF Surgeons. Uniformly, the individual characteristics most strongly desired are professionalism, being a team player, and leadership. Possessing or obtaining Airborne and Flight Surgeon qualifications prior to consideration for a surgeon position was highly desired. Residency training within Family Medicine or Emergency Medicine constituted the vast majority of specialty preference. Understanding which characteristics and attributes are desirable to current surgeons and commanders can aid physicians interested in SOF surgeon positions. Using this study and future studies can guide career planning and foster the selection of ideally trained physicians who will operate at the tip of the spear. The views expressed are those of the author(s) and do not reflect the official policy of the Department of the Army, the Department of Defense or the U.S. Government. 2012.

Pan-cancer analysis reveals technical artifacts in TCGA germline variant calls.

Science.gov (United States)

Buckley, Alexandra R; Standish, Kristopher A; Bhutani, Kunal; Ideker, Trey; Lasken, Roger S; Carter, Hannah; Harismendy, Olivier; Schork, Nicholas J

2017-06-12

Cancer research to date has largely focused on somatically acquired genetic aberrations. In contrast, the degree to which germline, or inherited, variation contributes to tumorigenesis remains unclear, possibly due to a lack of accessible germline variant data. Here we called germline variants on 9618 cases from The Cancer Genome Atlas (TCGA) database representing 31 cancer types. We identified batch effects affecting loss of function (LOF) variant calls that can be traced back to differences in the way the sequence data were generated both within and across cancer types. Overall, LOF indel calls were more sensitive to technical artifacts than LOF Single Nucleotide Variant (SNV) calls. In particular, whole genome amplification of DNA prior to sequencing led to an artificially increased burden of LOF indel calls, which confounded association analyses relating germline variants to tumor type despite stringent indel filtering strategies. The samples affected by these technical artifacts include all acute myeloid leukemia and practically all ovarian cancer samples. We demonstrate how technical artifacts induced by whole genome amplification of DNA can lead to false positive germline-tumor type associations and suggest TCGA whole genome amplified samples be used with caution. This study draws attention to the need to be sensitive to problems associated with a lack of uniformity in data generation in TCGA data.

Modelling Social-Technical Attacks with Timed Automata

DEFF Research Database (Denmark)

David, Nicolas; David, Alexandre; Hansen, Rene Rydhof

2015-01-01

. In this paper we develop an approach towards modelling socio-technical systems in general and socio-technical attacks in particular, using timed automata and illustrate its application by a complex case study. Thanks to automated model checking and automata theory, we can automatically generate possible attacks...... in our model and perform analysis and simulation of both model and attack, revealing details about the specific interaction between attacker and victim. Using timed automata also allows for intuitive modelling of systems, in which quantities like time and cost can be easily added and analysed....

Probabilistic analysis of 900 MWe PWR. Shutdown technical specifications

International Nuclear Information System (INIS)

Mattei, J.M.; Bars, G.

1987-11-01

During annual shutdown, preventive maintenance and modifications which are made on PWRs cause scheduled unavailabilities of equipment or systems which might harm the safety of the installation, in spite of the low level of decay heat during this period. The pumps in the auxiliary feedwater system, component cooling water system, service water system, the water injection arrays (LPIS, HPIS, CVCS), and the containment spray system may have scheduled unavailability, as well as the power supply of the electricity boards. The EDF utility is aware of the risks related to these situations for which accident procedures have been set up and hence has proposed limiting downtime for this equipment during the shutdown period, through technical specifications. The project defines the equipment required to ensure the functions important for safety during the various shutdown phases (criticality, water inventory, evacuation of decay heat, containment). In order to be able to judge the acceptability of these specifications, the IPSN, the technical support of the Service Central de Surete des Installations Nucleaires, has used probabilistic methodology to analyse the impact on the core melt probability of these specifications, for a French 900 MWe PWR

A cost and technical efficiency analysis of two alternative models for implementing the basic package of health services in Afghanistan.

Science.gov (United States)

Blaakman, Aaron Philip; Salehi, Ahmad Shah; Boitard, Romain

2014-01-01

Since 2003, the Afghan Ministry of Public Health (MoPH) and international partners have directed a contracting-out model through which non-governmental organisations (NGOs) deliver the Basic Package of Health Services (BPHS) in 31 of the 34 Afghan provinces. The MoPH also managed health service delivery in three provinces under an alternative initiative entitled Strengthening Mechanisms (SM). In 2011, under the authority of the MoPH and Delegation of the European Union to Afghanistan, EPOS Health Management conducted a cost and technical efficiency study of the contracting-out and SM mechanisms in six provinces to examine economic trade-offs in the provision of the BPHS. The study provides analyses of all resource inputs and primary outputs of the BPHS in the six provinces during 2008 and 2009. The authors examined technical efficiency using Data Envelopment Analysis (DEA) at the BPHS facility level. Cost analysis results indicate that the weighted average cost per BPHS outpatient visit totalled $3.41 in the SM provinces and $5.39 in the NGO-led provinces in 2009. Furthermore, the data envelopment analyses (DEAs) indicate that facilities in the three NGO-led provinces scored 0.168 points higher on the DEA scale (0-1) than SM facilities. The authors conclude that an approximate 60% increase in costs yielded a 16.8% increase in technical efficiency in the delivery of the BPHS during 2009 in the six provinces.

WHAT IS BEHIND BIASED TECHNICAL CHANGE IN PRODUCTION OF CEREAL AND OILSEED CROPS IN SLOVAKIA?

Directory of Open Access Journals (Sweden)

Peter FANDEL

2014-11-01

Full Text Available This study investigates the productivity change in the production of cereal and oilseed crops in Slovakia with special emphasis on technical change analysis. It employs a non-parametric distance function approach to measure Malmquist productivity index which is decomposed into technical efficiency change and technical change. Technical change is further decomposed into technical change magnitude and input- and output-bias indices. The productivity change components provide more detailed information about character of productivity change itself and its sources. Our results indicate that productivity in the analysed sector decreased approximately by 20% within the examined period of 1998-2007. The decrease was caused mostly by worsening the technical change (-41,6%. Indices of input- and output bias of technical change were various from unity what suggests that technical change was not Hicks’- neutral. Results of further analysis of the direction of technical change bias indicate that farms in average tend to apply fertilizers-using/seed-saving, seed-using/labour-saving, and fertilizers-using/labour-saving technical change bias over the whole sample period, as well as in the EU pre-accession and EU post-accession periods.

A stochastic frontier analysis of technical efficiency of fish cage culture in Peninsular Malaysia.

Science.gov (United States)

Islam, Gazi Md Nurul; Tai, Shzee Yew; Kusairi, Mohd Noh

2016-01-01

Cage culture plays an important role in achieving higher output and generating more export earnings in Malaysia. However, the cost of fingerlings, feed and labour have increased substantially for cage culture in the coastal areas in Peninsular Malaysia. This paper uses farm level data gathered from Manjung, Perak and Kota Tinggi, Johor to investigate the technical efficiency of brackish water fish cage culture using the stochastic frontier approach. The technical efficiency was estimated and specifically the factors affecting technical inefficiencies of fish cage culture system in Malaysia was investigated. On average, 37 percent of the sampled fish cage farms are technically efficient. The results suggest very high degrees of technical inefficiency exist among the cage culturists. This implies that great potential exists to increase fish production through improved efficiency in cage culture management in Peninsular Malaysia. The results indicate that farmers obtained grouper fingerlings from other neighboring countries due to scarcity of fingerlings from wild sources. The cost of feeding for grouper (Epinephelus fuscoguttatus) requires relatively higher costs compared to seabass (Lates calcarifer) production in cage farms in the study areas. Initiatives to undertake extension programmes at the farm level are needed to help cage culturists in utilizing their resources more efficiently in order to substantially enhance their fish production.

An analysis of the productivity and technical efficiency of smallholder ...

African Journals Online (AJOL)

This study used the stochastic frontier production function to analyse the productivity and technical efficiency of 4 different agricultural production systems in Ethiopia; namely, irrigated seasonal farms on traditional irrigation systems, irrigated seasonal farms on modern communal irrigation systems, rainfed seasonal farms for ...

Cytological preparations for molecular analysis: A review of technical procedures, advantages and limitations for referring samples for testing.

Science.gov (United States)

da Cunha Santos, G; Saieg, M A; Troncone, G; Zeppa, P

2018-04-01

Minimally invasive procedures such as endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) must yield not only good quality and quantity of material for morphological assessment, but also an adequate sample for analysis of molecular markers to guide patients to appropriate targeted therapies. In this context, cytopathologists worldwide should be familiar with minimum requirements for refereeing cytological samples for testing. The present manuscript is a review with comprehensive description of the content of the workshop entitled Cytological preparations for molecular analysis: pre-analytical issues for EBUS TBNA, presented at the 40th European Congress of Cytopathology in Liverpool, UK. The present review emphasises the advantages and limitations of different types of cytology substrates used for molecular analysis such as archival smears, liquid-based preparations, archival cytospin preparations and FTA (Flinders Technology Associates) cards, as well as their technical requirements/features. These various types of cytological specimens can be successfully used for an extensive array of molecular studies, but the quality and quantity of extracted nucleic acids rely directly on adequate pre-analytical assessment of those samples. In this setting, cytopathologists must not only be familiar with the different types of specimens and associated technical procedures, but also correctly handle the material provided by minimally invasive procedures, ensuring that there is sufficient amount of material for a precise diagnosis and correct management of the patient through personalised care. © 2018 John Wiley & Sons Ltd.

"You Will": Technology, Magic, and the Cultural Contexts of Technical Communication.

Science.gov (United States)

Kitalong, Karla Saari

2000-01-01

Provides some background on the use of magical language in technical contexts, gives examples of magical discourse in technology advertisements and newsmagazine articles, and proposes a technical communication pedagogy of media analysis. Notes that the proposed pedagogy involves students conducting diagnostic critiques of media texts and affords…

NWMO transportation technical work program

International Nuclear Information System (INIS)

Hatton, C.

2015-01-01

This paper describes technical work program for the transportation nuclear waste by the Nuclear Waste Management Organization (NWMO). Transportation work program involves risk assessment which under normal conditions involves dose assessment to the worker and the public as well as consideration of transportation system routing and operations. It also involves possible accident scenarios using forensic modelling and probability analysis.

NWMO transportation technical work program

Energy Technology Data Exchange (ETDEWEB)

Hatton, C. [Nuclear Waste Management Organization, Toronto, ON (Canada)

2015-07-01

This paper describes technical work program for the transportation nuclear waste by the Nuclear Waste Management Organization (NWMO). Transportation work program involves risk assessment which under normal conditions involves dose assessment to the worker and the public as well as consideration of transportation system routing and operations. It also involves possible accident scenarios using forensic modelling and probability analysis.

Public health foodborne illness case study during a Special Operations Forces deployment to South America.

Science.gov (United States)

McCown, Michael; Grzeszak, Benjamin

2010-01-01

Although many public health articles have been published detailing foodborne illness outbreaks, a medical literature search revealed no articles that detail a case study or a specific response of a deployed U.S. military unit to a potential foodborne illness. This article describes a recent public health case study of a U.S. Special Operations Forces (SOF) team sickened while deployed to South America. It highlights public health factors which may affect U.S. personnel deployed or serving overseas and may serve as a guide for a deployed SOF medic to reference in response to a potential food- or waterborne illness outbreak. Eight food samples and five water samples were collected. The food samples were obtained from the host nation kitchen that provided food to the SOF team. The water samples were collected from the kitchen as well as from multiple sites on the host nation base. These samples were packaged in sterile containers, stored at appropriate temperatures, and submitted to a U.S. Army diagnostic laboratory for analysis. Laboratory results confirmed the presence of elevated aerobic plate counts (APCs) in the food prepared by the host nation and consumed by the SOF team. High APCs in food are the primary indicator of improper sanitation of food preparation surfaces and utensils. This case study concluded that poor kitchen sanitation, improper food storage, preparation, and/or holding were the probable conditions that led to the team?s symptoms. These results emphasize the importance of ensuring safe food and water for U.S. personnel serving overseas, especially in a deployment or combat setting. Contaminated food and/or water will negatively impact the health and availability of forces, which may lead to mission failure. The SOF medic must respond to potential outbreaks and be able to (1) critically inspect food preparation areas and accurately advise commanders in order to correct deficiencies and (2) perform food/water surveillance testing consistently

Technical bases for estimating fission product behavior during LWR accidents. Technical report

International Nuclear Information System (INIS)

1981-06-01

The objective of this report is to provide the Nuclear Regulatory Commission and the public with a description of the best technical information currently available for estimating the release of radioactive material during postulated reactor accidents, and to identify where gaps exist in our knowledge. This report focuses on those low probability-high consequence accidents involving severe damage to the reactor core and core meltdown that dominate the risk to the public. Furthermore, in this report particular emphasis is placed on the accident behavior of radioactive iodine, as (1) radioiodine is predicted to be a major contributor to public exposure, (2) current regulatory accident analysis procedures focus on iodine, and (3) several technical issues have been raised recently about the magnitude of iodine release. The generation, transport, and attenuation of aerosols were also investigated in some detail to assess their effect on fission product release estimates and to determine the performance of engineered safety features under accident conditions exceeding their design bases

33 CFR 337.10 - Supervision of Federal projects.

Science.gov (United States)

2010-07-01

... plans and description of the project as expressed in the SOF or ROD. Conditions and/or limitations... aware of their responsibilities for compliance with the terms and conditions of state certifications and other conditions expressed in the SOF or ROD. ...

A Qualitative Content Analysis of Information Dissemination during the Consolidation of Two Technical Colleges

Science.gov (United States)

Drinnon, Charles

2017-01-01

This research examined the ways and means administration used to disseminate information concerning the consolidation of two technical colleges in the State of Georgia, USA. These means of information dissemination included press releases by the consolidating colleges and the Technical College System of Georgia (the system which the consolidating…

The Method of Relative Evaluations in the Analysis of the Innovation and Scientific-Technical Activity in the National Innovation System

Directory of Open Access Journals (Sweden)

Melnyk Alexander G.

2017-04-01

Full Text Available The article suggests the methodical approach to calculation of the system of analytical indicators for complex analysis of the innovation and scientific-technical activity by defining indexes such as: implementarity of technologies; institutional fullness of the national innovation system (NIS; high technology grade of the industry branches and sectors of the NIS. Fundamentals on the interpretation of these indicators in determining the status of institutional and technological structures, as well as the investment ability of technologies in the NIS, have been formulated. An evaluation of status of the innovation and scientific-technical activity in the industry and in the sector of scientific organizations of Ukraine was carried out on the example of practical application of the methodical approach to the analysis of statistical data. A simulation of the calculation index of implementarity of technologies in terms of the hypothesis of a 10 x magnification of the number of patents for inventions was completed. The author’s own interpretation of values of the calculated indicators has been proposed.

Projected configuration of a coal-fired district heating source on the basis of comparative technical-economical optimization analysis

Directory of Open Access Journals (Sweden)

Tańczuk Mariusz

2017-01-01

Full Text Available District heating technologies should be efficient, effective and environmentally friendly. The majority of the communal heating systems in Poland produce district hot water in coal-fired boilers. A large number of them are considerably worn out, low-efficient in the summer time and will not comply with forthcoming regulations. One of the possible solution for such plants is repowering with new CHP systems or new boilers fuelled with fuels alternative to coal. Optimisation analysis of the target configuration of municipal heat generating plant is analysed in the paper. The work concerns repowering the existing conventional heat generating plant according to eight different scenarios of the plant configuration meeting technical and environmental requirements forecasted for the year of 2035. The maximum demand for heat of the system supplied by the plant is 185 MW. Taking into account different technical configurations on one side, and different energy and fuel prices on the other side, the comparative cost-benefits analysis of the assumed scenarios has been made. The basic economical index NPV (net present value has been derived for each analysed scenario and the results have been compared and discussed. It was also claimed that the scenario with CHP based on ICE engines is optimal.

Projected configuration of a coal-fired district heating source on the basis of comparative technical-economical optimization analysis

Science.gov (United States)

Tańczuk, Mariusz; Radziewicz, Wojciech; Olszewski, Eligiusz; Skorek, Janusz

2017-10-01

District heating technologies should be efficient, effective and environmentally friendly. The majority of the communal heating systems in Poland produce district hot water in coal-fired boilers. A large number of them are considerably worn out, low-efficient in the summer time and will not comply with forthcoming regulations. One of the possible solution for such plants is repowering with new CHP systems or new boilers fuelled with fuels alternative to coal. Optimisation analysis of the target configuration of municipal heat generating plant is analysed in the paper. The work concerns repowering the existing conventional heat generating plant according to eight different scenarios of the plant configuration meeting technical and environmental requirements forecasted for the year of 2035. The maximum demand for heat of the system supplied by the plant is 185 MW. Taking into account different technical configurations on one side, and different energy and fuel prices on the other side, the comparative cost-benefits analysis of the assumed scenarios has been made. The basic economical index NPV (net present value) has been derived for each analysed scenario and the results have been compared and discussed. It was also claimed that the scenario with CHP based on ICE engines is optimal.

Modeling technical change in energy system analysis: analyzing the introduction of learning-by-doing in bottom-up energy models

International Nuclear Information System (INIS)

Berglund, Christer; Soederholm, Patrik

2006-01-01

The main objective of this paper is to provide an overview and a critical analysis of the recent literature on incorporating induced technical change in energy systems models. Special emphasis is put on surveying recent studies aimed at integrating learning-by-doing into bottom-up energy systems models through so-called learning curves, and on analyzing the relevance of learning curve analysis for understanding the process of innovation and technology diffusion in the energy sector. The survey indicates that this model work represents a major advance in energy research, and embeds important policy implications, not the least concerning the cost and the timing of environmental policies (including carbon emission constraints). However, bottom-up energy models with endogenous learning are also limited in their characterization of technology diffusion and innovation. While they provide a detailed account of technical options-which is absent in many top-down models-they also lack important aspects of diffusion behavior that are captured in top-down representations. For instance, they often fail in capturing strategic technology diffusion behavior in the energy sector as well as the energy sector's endogenous responses to policy, and they neglect important general equilibrium impacts (such as the opportunity cost of redirecting R and D support to the energy sector). Some suggestions on how innovation and diffusion modeling in bottom-up analysis can be improved are put forward

Technical basis for the aboveground structure failure and associated represented hazardous conditions

International Nuclear Information System (INIS)

GOETZ, T.G.

2003-01-01

This technical basis document describes the risk binning process and the technical basis for assigning risk bins for the aboveground structure failure representative accident and associated represented hazardous conditions. This document was developed to support the documented safety analysis

Pedagogical characteristics of the systems for assessing the technical and tactical skills of qualified volleyball players

Directory of Open Access Journals (Sweden)

Мykhailo Oliinyk

2017-12-01

Full Text Available Purpose: on the basis of the analysis of the special literature and their own experimental studies, to determine the characteristics of the systems for assessing the technical and tactical skills of qualified volleyball players. Material & Methods: study was conducted on the basis of the material of the national team of Zaporozhye State Medical University on volleyball. Analysis and generalization of the data of scientific and methodical literature are used; registration, analysis and interpretation of indicators of technical and tactical actions of qualified volleyball players in training and competitive processes; pedagogical observations; algorithms for calculating the quantitative and qualitative indicators of technical and tactical skill in volleyball; methods of mathematical statistics. Results: data on the existence of a strong statistical relationship between the systems of assessment of technical and tactical skills of qualified volleyball players, taking into account the specificity of the game role. Conclusion: shows the specifics of the application of various systems for assessing the technical and tactical skills of qualified volleyball players, taking into account the factors of the game role, noted the methodological features of special analysis and interpretation of indicators of technical and tactical actions in the adversarial process.

Technical Training: CLEAN-2002: Working in a Cleanroom

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training Programme: Learning for the LHC! CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific ...

The effectiveness of different antiviral treatment regimens in patients with chronic hepatitis C infected with genotype 3 virus

Directory of Open Access Journals (Sweden)

E.V. Riabokon

2018-02-01

Full Text Available Background. Chronic hepatitis C (CHC remains one of the most urgent problems of modern infectology. In recent years, the principles of antiviral therapy have substantially changed due to the emergence of new drugs with a direct mechanism of action and the development of non-interferon treatment regimens. Two regimens included HCV NS5B polymerase inhibitors were available in Ukraine for treating CHC patients infected with genotype 3 virus. Objective: to analyze the effectiveness of different schemes of antiviral treatment in patients with chronic hepatitis C infected with genotype 3 virus. Materials and methods. The study included 66 patients with CHC infected with genotype 3 virus. All patients underwent study of liver fibrosis degree by the method of fibrotest; in the dynamics, we have tested viral load, liver tests, indicators of complete blood count, functional kidney tests. Antiviral treatment and analysis of its effectiveness were carried out in accordance with the Unified Protocol of the Ministry of Health of Ukraine. Results. According to the results of treating CHC patients infected with genotype 3 virus, high efficacy of both applied schemes of antiviral therapy in clinical practice is shown. A rapid virologic response occurred in 93.5 % of CHC patients treated with peginterferon (peg-IFN α2a + sofosbuvir (SOF + ribavirin (RBV regimen, and in 82.9 % of patients receiving non-interferon therapy with SOF + RBV. The immediate response to treatment was achieved according to treatment regimens in 90.3 and 94.3 % of patients. Sustained virological response at week 24 after antiviral treatment was noted in 87.5 and 91.4 % of patients, respectively. The frequency of virological response to antiviral treatment in CHC patients infected with genotype 3 virus did not depend on the stage of liver fibrosis, either in the use of non-interferon treatment by SOF + RBV scheme, or in the treatment with interferon-containing scheme included the drug with

TESTING TECHNICAL AND SCALE EFFICIENCY OF KAZAKHBANKS:EVIDENCE BASED ON DATA ENVELOPMENT ANALYSIS

Directory of Open Access Journals (Sweden)

Razzaque H Bhatti

2013-01-01

Full Text Available This paper tests technical and scale efficiency of 20 Kazakh banks using annualdata on three inputs (interest expenses, non-interestexpenses and deposits andthree outputs (interest income, non-interest income and loans over the period2007-2011. Two input-oriented data envelopment analysis models of Charnes etal (1978 and Banker et al(1984, which are based on constant return to scale andvariable return to scale respectively, areused to evaluate technical efficiency,whereas scale efficiency is computed bydividing the former efficiency ratio bythe latter one. The resultsobtained show that the average efficiency ratios ofindividual banks under constant and variable returns toscale range from 0.88 and1.00 to 0.93 and 1.00 respectively, whereas those of all banks between 0.95 and0.98 respectively. Only are the fivebanks (ATFB, Citibank, HSBC bank,KazInvest bank and Exim bank the mostefficient banks in Kazakhstan, sincetheir efficiency ratios have been consistently equal to unity, implying that thesebanks operate at their optimal levels. The efficiency scores of the remaining 15banks range from 0.88 to 0.99, and as suchthe majority of these banks do notseem to operate far more below their optimal level. The results indicate that theperformance of the Kazakh banks deteriorated substantially during the globalfinancial crisis of 2008 because theCRS ratio dropped from 0.65 in 2007 to 0.50in 2008 and to 0.40 in 2009. The results alsoconfirm that most of the foreignbanks perform relatively better than domestic banks.

Should Project Managers Buy Technical Data

Science.gov (United States)

2017-04-06

the future. The research also exposed perspective organizational viewpoints on what technical data rights are needed and what analysis is available...DAU professor Dr. John Larson. To conclude, this research project was completed with tremendous love and support from my family . Address any...Study ........................................................................................................... 2 Significance of This Research

Health condition and residual life of deteriorating technical systems

Energy Technology Data Exchange (ETDEWEB)

Reinertsen, Rune

1998-12-31

Many offshore installations in the Norwegian Sector of the North Sea approach the end of their useful life. The same is true of many power plants and technical systems in general. This thesis describes the theory and improves the methods for the determination of the health condition and residual life of technical systems. Rather than developing new methods it discusses new ways of using existing statistical methods. The main contributions are: (1) A survey of the literature of diagnosis, prediction and life extension for deteriorating technical systems, (2) A discussion of some consequences of selecting the wrong life model, (3) A description of problems related to the determination of mean residual life of non-repairable technical systems, (4) Presentation of the concept of `technical health` to describe the soundness of a system exposed to failure mechanisms, (5) A model for predicting the technical health and residual life of a corroding system, (6) Recommends requirements and methods for using expert knowledge in safety and reliability analysis, (7) A general inspection strategy for system fault diagnosis by using Shannon entropy, (8) Points out weaknesses and strengths of risk measures used in the offshore industry today. 237 refs., 23 figs., 6 tabs.

Health condition and residual life of deteriorating technical systems

Energy Technology Data Exchange (ETDEWEB)

Reinertsen, Rune

1997-12-31

Many offshore installations in the Norwegian Sector of the North Sea approach the end of their useful life. The same is true of many power plants and technical systems in general. This thesis describes the theory and improves the methods for the determination of the health condition and residual life of technical systems. Rather than developing new methods it discusses new ways of using existing statistical methods. The main contributions are: (1) A survey of the literature of diagnosis, prediction and life extension for deteriorating technical systems, (2) A discussion of some consequences of selecting the wrong life model, (3) A description of problems related to the determination of mean residual life of non-repairable technical systems, (4) Presentation of the concept of `technical health` to describe the soundness of a system exposed to failure mechanisms, (5) A model for predicting the technical health and residual life of a corroding system, (6) Recommends requirements and methods for using expert knowledge in safety and reliability analysis, (7) A general inspection strategy for system fault diagnosis by using Shannon entropy, (8) Points out weaknesses and strengths of risk measures used in the offshore industry today. 237 refs., 23 figs., 6 tabs.

Considerations of health benefit-cost analysis for activities involving ionizing radiation exposure and alternatives. Technical report

International Nuclear Information System (INIS)

1977-01-01

The report deals with development of methodology for the health benefit-cost analysis of activities that result in radiation exposure to humans. It attempts to frame the problems and to communicate the necessary elements of the complex technical process required for this method of analysis. The main thrust of the report is to develop a methodology for analyzing the benefits and costs of these activities. Application of the methodology is demonstrated for nuclear power production and medical uses of radiation, but no definitive analysis is attempted. The report concludes that benefit-cost analysis can be effectively applied to these applications and that it provides a basis for more informed governmental decision-making and for public participation in evaluating the issues of radiation exposure. It notes, however, that for cases where national policy is involved, decisions must inevitably be made on the basis of value judgements to which such analyses can make only limited contributions. An important conclusion is that a significant reduction in radiation exposure to the population is apparently achievable by development of methods for eliminating unproductive medical X-ray exposure

Mechanism analysis on nuclear technical relocation of the major countries

International Nuclear Information System (INIS)

1985-12-01

This report is about cooperation method of nuclear energy among the USA, France and Canada. So it deals with building a cooperative system on nuclear technical relocation, researching a foreign policy on nuclear energy of the USA and cooperation method and cooperation trend of Japan, Canada, Russia, China and West Germany.

Parliamentarian sovereignty and technical development

International Nuclear Information System (INIS)

Dreier, H.; Hofmann, J.

1986-01-01

The title indicates the points of main emphasis of the contributions, and points to the programme embodied in the volume. The question is - given the tremendous and ever increasing amount of secondary problems associated with a heated technology development - whether the 'sovereign' state is at all capable of controlling, piloting and fostering technic-scientific processes. The first part ('sovereignty and parliamentarian legislator state') concentrates on the history of notions and ideas in the concept of the sovereign, modern state, and on the constitutional law in force (Dreier, Frohn); the current efficiency of parliament as an organ of control in the process of legislation is investigated (Schulze-Fielitz). The central concern of part 2 ('environmental law and technical development') are topical questions of environmental law (Hofmann, Luebbe-Wolff). Besides the analysis of dogmatic problems of a special administrative law, the major issue is whether and in how far - given modern large-scale technologies - law can adequately govern technique (Schmidt). By analyzing the relationship between technical development and possibilities for guidance by a parliamentarian constitutional state, the articles deal with a central point of intersection between state and administrative law. (orig./HP) [de

On sustainability assessment of technical systems. Experience from systems analysis with the ORWARE and Ecoeffect tools

Energy Technology Data Exchange (ETDEWEB)

Assefa, Getachew [Royal Inst. of Technology, Stockholm (Sweden). Dept. of Chemical Engineering

2006-06-15

Engineering research and development work is undergoing a reorientation from focusing on specific parts of different systems to a broader perspective of systems level, albeit at a slower pace. This reorientation should be further developed and enhanced with the aim of organizing and structuring our technical systems in meeting sustainability requirements in face of global ecological threats that have far-reaching social and economic implications, which can no longer be captured using conventional approach of research. Until a list of universally acceptable, clear, and measurable indicators of sustainable development is developed, the work with sustainability metrics should continue to evolve as a relative measure of ecological, economic, and social performance of human activities in general, and technical systems in particular. This work can be done by comparing the relative performance of alternative technologies of providing the same well-defined function or service; or by characterizing technologies that enjoy different levels of societal priorities using relevant performance indicators. In both cases, concepts and methods of industrial ecology play a vital role. This thesis is about the development and application of a systematic approach for the assessment of the performance of technical systems from the perspective of systems analysis, sustainability, sustainability assessment, and industrial ecology. The systematic approach developed and characterized in this thesis advocates for a simultaneous assessment of the ecological, economic, and social dimensions of performance of technologies in avoiding sub-optimization and problem shifting between dimensions. It gives a holistic picture by taking a life cycle perspective of all important aspects. The systematic assessment of technical systems provides an even-handed assessment resulting in a cumulative knowledge. A modular structure of the approach makes it flexible enough in terms of comparing a number of

Audit of Wolf Creek Generating Station, Unit 1 technical specifications. Final technical evaluation report

International Nuclear Information System (INIS)

Stromberg, H.M.

1985-07-01

This document was prepared for the Nuclear Regulatory Commission (NRC) to assist them in determining whether the Wolf Creek Generating Station Unit 1 Technical Specifications (T/S), which govern plant systems configurations and operations, are in conformance with the assumptions of the Final Safety Analysis Report (FSAR) as amended, the requirements of the Safety Evaluation Report (SER) as supplemented, and the Comments and Responses to the Wolf Creek Technical Specification Draft Inspection Report. A comparative audit of the FSAR as amended, the SER as supplemented, and the Draft Inspection Report was performed with the Wolf Creek T/S. Several discrepancies were identified and subsequently resolved through discussions with the cognizant NRC reviewer, NRC staff reviewers and/or utility representatives. The Wolf Creek Generating Station Unit 1 T/S, to the extent reviewed, are in conformance with the FSAR, SER, and Draft Inspection Report

29 CFR 1607.14 - Technical standards for validity studies.

Science.gov (United States)

2010-07-01

..., if the behavior results in work product(s), an analysis of the work product(s). Any job analysis.... This job analysis should show the work behavior(s) required for successful performance of the job, or... 29 Labor 4 2010-07-01 2010-07-01 false Technical standards for validity studies. 1607.14 Section...

Do Farm Programs Explain Mean and Variance of Technical Efficiency? Stochastic Frontier Analysis

OpenAIRE

Ranjan, Rahul; Shaik, Saleem; Mishra, Ashok K.

2010-01-01

Past literature has examined the importance of farm programs on the volatility and returns on general and agriculture economic growth. The objective of this study was to assess the impact of farm program payments on technical efficiency. The study used aggregate state level panel data from the U.S agricultural sector. Results indicate production increasing with increasing units of inputs. Results from this study indicate that farm program payments play an important role in technical efficienc...

Technical change in US industry: A cross-industry analysis

Science.gov (United States)

Nelson, R. R. (Editor)

1981-01-01

The nature of the public policies which have influenced the pace and pattern of technical progress in a number of American industries is studied with the view of assessing the broad effects of these policies. The industries studied are agriculture, pharmaceuticals, semiconductors, computers, civil aircraft, automobiles and residential construction. The policies considered include research and development funding as well as government procurement, education, information dissemination, patent protection, licensing, regulations, and anti-trust policies.

Do technical skills correlate with non-technical skills in crisis resource management: a simulation study.

Science.gov (United States)

Riem, N; Boet, S; Bould, M D; Tavares, W; Naik, V N

2012-11-01

Both technical skills (TS) and non-technical skills (NTS) are key to ensuring patient safety in acute care practice and effective crisis management. These skills are often taught and assessed separately. We hypothesized that TS and NTS are not independent of each other, and we aimed to evaluate the relationship between TS and NTS during a simulated intraoperative crisis scenario. This study was a retrospective analysis of performances from a previously published work. After institutional ethics approval, 50 anaesthesiology residents managed a simulated crisis scenario of an intraoperative cardiac arrest secondary to a malignant arrhythmia. We used a modified Delphi approach to design a TS checklist, specific for the management of a malignant arrhythmia requiring defibrillation. All scenarios were recorded. Each performance was analysed by four independent experts. For each performance, two experts independently rated the technical performance using the TS checklist, and two other experts independently rated NTS using the Anaesthetists' Non-Technical Skills score. TS and NTS were significantly correlated to each other (r=0.45, P<0.05). During a simulated 5 min resuscitation requiring crisis resource management, our results indicate that TS and NTS are related to one another. This research provides the basis for future studies evaluating the nature of this relationship, the influence of NTS training on the performance of TS, and to determine whether NTS are generic and transferrable between crises that require different TS.

Measuring and Benchmarking Technical Efficiency of Public Hospitals in Tianjin, China: A Bootstrap-Data Envelopment Analysis Approach.

Science.gov (United States)

Li, Hao; Dong, Siping

2015-01-01

China has long been stuck in applying traditional data envelopment analysis (DEA) models to measure technical efficiency of public hospitals without bias correction of efficiency scores. In this article, we have introduced the Bootstrap-DEA approach from the international literature to analyze the technical efficiency of public hospitals in Tianjin (China) and tried to improve the application of this method for benchmarking and inter-organizational learning. It is found that the bias corrected efficiency scores of Bootstrap-DEA differ significantly from those of the traditional Banker, Charnes, and Cooper (BCC) model, which means that Chinese researchers need to update their DEA models for more scientific calculation of hospital efficiency scores. Our research has helped shorten the gap between China and the international world in relative efficiency measurement and improvement of hospitals. It is suggested that Bootstrap-DEA be widely applied into afterward research to measure relative efficiency and productivity of Chinese hospitals so as to better serve for efficiency improvement and related decision making. © The Author(s) 2015.

Summary of the technical review of the safety analysis reports for packaging (SARP) for the transnuclear transport/storage casks: TN-BRP and TN-REG

International Nuclear Information System (INIS)

1986-07-01

The Safety Analysis Reports for Packaging for two spent fuel shipping casks were technically reviewed by the Oak Ridge National Laboratory. The casks were designed by Transnuclear, Inc., for shipment of 85 Big Rock Point boiling water reactor fuel elements and 40 R.E. Ginna pressurized water reactor fuel elements from West Valley, New York, to Idaho Falls, Idaho. The intent of the review was to ensure compliance of the casks with the requirements the applicable Federal Regulations contained in 10 CFR Pt. 71 and allow issuance of Department of Energy Certificates of Compliance for transport by the Department of Energy Idaho Operations Office. The review was performed by a team of Oak Ridge National Laboratory staff assembled for their expertise in criticality analysis, shielding, metallurgy, nondestructive testing, thermal analysis, structural analysis, and containment. This report describes the review processes, the findings in each technical area, and the overall conclusion that a Certificate of Compliance could be issued for the proposed single shipment under the specified conditions and constraints

SOF Language Transformation Strategy Needs Assessment Project: SOF Operator Survey Report

Science.gov (United States)

2004-10-01

CAT III/IV Language More difficult languages to acquire for native English speakers. Examples: Cantonese , Japanese, Arabic, Dari, Pashto, Turkish...simple conversations on familiar topics (M = 68.4) and less confident in their ability participate in informal conversations on practical, social , and...familiar topics (M = 59.6), and to participate in informal conversations on practical, social , and professional topics (M = 40.3) than personnel

Technical Network

CERN Multimedia

2007-01-01

In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

Vocational and Technical Education in Peru.

Science.gov (United States)

Bellew, Rosemary; Moock, Peter