Embourgeoisement et effet littoral. Recompositions socio-spatiales à La Rochelle et à l’Île de Ré Embourgeoisement and the littoral effect. Socio-spatial recompositions in La Rochelle and the Île de Ré

Directory of Open Access Journals (Sweden)

Clotilde Buhot

2009-05-01

Full Text Available Cette contribution examine l’importance des fonctions littorales et urbaines dans la structuration socio-spatiale de La Rochelle et de l’Île de Ré (France. L’analyse des dynamiques foncières et immobilières permet de définir le rôle des résidences secondaires dans cette région touristique.This essay examines the importance of littoral and urban factors in the socio-spatial structuration of La Rochelle and the Île de Ré (France. The analysis of the dynamics of property and real estate allow the definition of the role of second homes in this tourist region.

Rational design of reconfigurable prismatic architected materials

Science.gov (United States)

Overvelde, Johannes T. B.; Weaver, James C.; Hoberman, Chuck; Bertoldi, Katia

2017-01-01

Advances in fabrication technologies are enabling the production of architected materials with unprecedented properties. Most such materials are characterized by a fixed geometry, but in the design of some materials it is possible to incorporate internal mechanisms capable of reconfiguring their spatial architecture, and in this way to enable tunable functionality. Inspired by the structural diversity and foldability of the prismatic geometries that can be constructed using the snapology origami technique, here we introduce a robust design strategy based on space-filling tessellations of polyhedra to create three-dimensional reconfigurable materials comprising a periodic assembly of rigid plates and elastic hinges. Guided by numerical analysis and physical prototypes, we systematically explore the mobility of the designed structures and identify a wide range of qualitatively different deformations and internal rearrangements. Given that the underlying principles are scale-independent, our strategy can be applied to the design of the next generation of reconfigurable structures and materials, ranging from metre-scale transformable architectures to nanometre-scale tunable photonic systems.

ETSI-Standard Reconfigurable Mobile Device for Supporting the Licensed Shared Access

Directory of Open Access Journals (Sweden)

Kyunghoon Kim

2016-01-01

Full Text Available In order for a Mobile Device (MD to support the Licensed Shared Access (LSA, the MD should be reconfigurable, meaning that the configuration of a MD must be adaptively changed in accordance with the communication standard adopted in a given LSA system. Based on the standard architecture for reconfigurable MD defined in Working Group (WG 2 of the Technical Committee (TC Reconfigurable Radio System (RRS of the European Telecommunications Standards Institute (ETSI, this paper presents a procedure to transfer control signals among the software entities of a reconfigurable MD required for implementing the LSA. This paper also presents an implementation of a reconfigurable MD prototype that realizes the proposed procedure. The modem and Radio Frequency (RF part of the prototype MD are implemented with the NVIDIA GeForce GTX Titan Graphic Processing Unit (GPU and the Universal Software Radio Peripheral (USRP N210, respectively. With a preset scenario that consists of five time slots from different signal environments, we demonstrate superb performance of the reconfigurable MD in comparison to the conventional nonreconfigurable MD in terms of the data receiving rate available in the LSA band at 2.3–2.4 GHz.

A Socio-spatial Dimension of Local Creative Industry Development in Semarang and Kudus Batik Clusters

Science.gov (United States)

Nugroho, P.

2018-02-01

Creative industries existence is inseparable from the underlying social construct which provides sources for creativity and innovation. The working of social capital in a society facilitates information exchange, knowledge transfer and technology acquisition within the industry through social networks. As a result, a socio-spatial divide exists in directing the growth of the creative industries. This paper aims to examine how such a socio-spatial divide contributes to the local creative industry development in Semarang and Kudus batik clusters. Explanatory sequential mixed methods approach covering a quantitative approach followed by a qualitative approach is chosen to understand better the interplay between tangible and intangible variables in the local batik clusters. Surveys on secondary data taken from the government statistics and reports, previous studies, and media exposures are completed in the former approach to identify clustering pattern of the local batik industry and the local embeddedness factors which have shaped the existing business environment. In-depth interviews, content analysis, and field observations are engaged in the latter approach to explore reciprocal relationships between the elements of social capital and the local batik cluster development. The result demonstrates that particular social ties have determined the forms of spatial proximity manifested in forward and backward business linkages. Trust, shared norms, and inherited traditions are the key social capital attributes that lead to such a socio-spatial divide. Therefore, the intermediating roles of the bridging actors are necessary to encouraging cooperation among the participating stakeholders for a better cluster development.

A Novel Docking System for Modular Self-Reconfigurable Robots

Directory of Open Access Journals (Sweden)

Tan Zhang

2017-10-01

Full Text Available Existing self-reconfigurable robots achieve connections and disconnections by a separate drive of the docking system. In this paper, we present a new docking system with which the connections and disconnections are driven by locomotion actuators, without the need for a separate drive, which reduces the weight and the complexity of the modules. This self-reconfigurable robot consists of two types of fundamental modules, i.e., active and passive modules. By the docking system, two types of connections are formed with the fundamental modules, and the docking and undocking actions are achieved through simple control with less sensory feedback. This paper describes the design of the robotic modules, the docking system, the docking process, and the docking force analysis. An experiment is performed to demonstrate the self-reconfigurable robot with the docking system.

Socio-Spatial Conflicts, Processes of Resistance and Spatial Scenario of Justice In Post- -Conflict in Colombian Cities

Directory of Open Access Journals (Sweden)

Carlos Alberto Torres-Tovar

2016-12-01

Full Text Available Colombia discussed 2016 Peace Accords with insurgencies (FARC and ELN, which would culmination of more than five decades of social and armed conflict, which began with a predominantly rural country and today is urban. However, the negotiations do not include the city, ignoring the dynamics and conflicts present in this. This situation leads us to think how in a context of post-conflict cities solve the socio-spatial conflicts and give attention to the demands that have marked the processes of urban and territorial resistance and be guaranteed spatial justice and the realization of right to the city. This article discusses some of these tensions.

ROLE OF TRANSPORT INFRASTRUCTURE IN EFFICIENCY IMPROVEMENT OF SPATIAL SOCIO-ECONOMIC DEVELOPMENT OF THE REGION

Directory of Open Access Journals (Sweden)

Ekaterina C. Chimitdorzhieva

2013-01-01

Full Text Available The problems of spatial socio-economic development of the region are considered in this article. Special attention is given to transport infrastructure. The authors propose methodical instruments for evaluating the influence of transport infrastructure on spatial development of region based on research of theoretic-methodical aspects of economic growth theory, location of economic activity and development concepts of infrastructural provision.

Joint NetWork Reconfiguration and Capacitor Placement by Bactrial Foraging Algorithm

Directory of Open Access Journals (Sweden)

Mohammad Ali Mohammadnia

2011-01-01

Full Text Available Power system engineers are forced to place more emphasis on reducing losses at the distribution level. From an economic perspective, Joint network reconfiguration and capacitor placement is one of the best ways to save energy. Application of heuristic technique is unavoidable, because of expansion of distribution networks and becoming more complex connections in these grids. In view of this, for the first this paper investigates the ability of Bacterial Foraging Algorithm (BFA for Joint network reconfiguration and capacitor placement.

Non-monotonic resonance in a spatially forced Lengyel-Epstein model

Energy Technology Data Exchange (ETDEWEB)

Haim, Lev [Physics Department, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Department of Oncology, Soroka University Medical Center, Beer-Sheva 84101 (Israel); Hagberg, Aric [Center for Nonlinear Studies, Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Meron, Ehud [Physics Department, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Department of Solar Energy and Environmental Physics, BIDR, Ben-Gurion University of the Negev, Sede Boqer Campus, Midreshet Ben-Gurion 84990 (Israel)

2015-06-15

We study resonant spatially periodic solutions of the Lengyel-Epstein model modified to describe the chlorine dioxide-iodine-malonic acid reaction under spatially periodic illumination. Using multiple-scale analysis and numerical simulations, we obtain the stability ranges of 2:1 resonant solutions, i.e., solutions with wavenumbers that are exactly half of the forcing wavenumber. We show that the width of resonant wavenumber response is a non-monotonic function of the forcing strength, and diminishes to zero at sufficiently strong forcing. We further show that strong forcing may result in a π/2 phase shift of the resonant solutions, and argue that the nonequilibrium Ising-Bloch front bifurcation can be reversed. We attribute these behaviors to an inherent property of forcing by periodic illumination, namely, the increase of the mean spatial illumination as the forcing amplitude is increased.

Switchable reconfiguration of nucleic acid nanostructures by stimuli-responsive DNA machines.

Science.gov (United States)

Liu, Xiaoqing; Lu, Chun-Hua; Willner, Itamar

2014-06-17

CONSPECTUS: The base sequence in DNA dictates structural and reactivity features of the biopolymer. These properties are implemented to use DNA as a unique material for developing the area of DNA nanotechnology. The design of DNA machines represents a rapidly developing research field in the area of DNA nanotechnology. The present Account discusses the switchable reconfiguration of nucleic acid nanostructures by stimuli-responsive DNA machines, and it highlights potential applications and future perspectives of the area. Programmed switchable DNA machines driven by various fuels and antifuels, such as pH, Hg(2+) ions/cysteine, or nucleic acid strands/antistrands, are described. These include the assembly of DNA tweezers, walkers, a rotor, a pendulum, and more. Using a pH-oscillatory system, the oscillatory mechanical operation of a DNA pendulum is presented. Specifically, the synthesis and "mechanical" properties of interlocked DNA rings are described. This is exemplified with the preparation of interlocked DNA catenanes and a DNA rotaxane. The dynamic fuel-driven reconfiguration of the catenane/rotaxane structures is followed by fluorescence spectroscopy. The use of DNA machines as functional scaffolds to reconfigurate Au nanoparticle assemblies and to switch the fluorescence features within fluorophore/Au nanoparticle conjugates between quenching and surface-enhanced fluorescence states are addressed. Specifically, the fluorescence features of the different DNA machines are characterized as a function of the spatial separation between the fluorophore and Au nanoparticles. The experimental results are supported by theoretical calculations. The future development of reconfigurable stimuli-responsive DNA machines involves fundamental challenges, such as the synthesis of molecular devices exhibiting enhanced complexities, the introduction of new fuels and antifuels, and the integration of new payloads being reconfigured by the molecular devices, such as enzymes or

The force pyramid: a spatial analysis of force application during virtual reality brain tumor resection.

Science.gov (United States)

Azarnoush, Hamed; Siar, Samaneh; Sawaya, Robin; Zhrani, Gmaan Al; Winkler-Schwartz, Alexander; Alotaibi, Fahad Eid; Bugdadi, Abdulgadir; Bajunaid, Khalid; Marwa, Ibrahim; Sabbagh, Abdulrahman Jafar; Del Maestro, Rolando F

2017-07-01

OBJECTIVE Virtual reality simulators allow development of novel methods to analyze neurosurgical performance. The concept of a force pyramid is introduced as a Tier 3 metric with the ability to provide visual and spatial analysis of 3D force application by any instrument used during simulated tumor resection. This study was designed to answer 3 questions: 1) Do study groups have distinct force pyramids? 2) Do handedness and ergonomics influence force pyramid structure? 3) Are force pyramids dependent on the visual and haptic characteristics of simulated tumors? METHODS Using a virtual reality simulator, NeuroVR (formerly NeuroTouch), ultrasonic aspirator force application was continually assessed during resection of simulated brain tumors by neurosurgeons, residents, and medical students. The participants performed simulated resections of 18 simulated brain tumors with different visual and haptic characteristics. The raw data, namely, coordinates of the instrument tip as well as contact force values, were collected by the simulator. To provide a visual and qualitative spatial analysis of forces, the authors created a graph, called a force pyramid, representing force sum along the z-coordinate for different xy coordinates of the tool tip. RESULTS Sixteen neurosurgeons, 15 residents, and 84 medical students participated in the study. Neurosurgeon, resident and medical student groups displayed easily distinguishable 3D "force pyramid fingerprints." Neurosurgeons had the lowest force pyramids, indicating application of the lowest forces, followed by resident and medical student groups. Handedness, ergonomics, and visual and haptic tumor characteristics resulted in distinct well-defined 3D force pyramid patterns. CONCLUSIONS Force pyramid fingerprints provide 3D spatial assessment displays of instrument force application during simulated tumor resection. Neurosurgeon force utilization and ergonomic data form a basis for understanding and modulating resident force

Continuum Reconfigurable Parallel Robots for Surgery: Shape Sensing and State Estimation with Uncertainty.

Science.gov (United States)

Anderson, Patrick L; Mahoney, Arthur W; Webster, Robert J

2017-07-01

This paper examines shape sensing for a new class of surgical robot that consists of parallel flexible structures that can be reconfigured inside the human body. Known as CRISP robots, these devices provide access to the human body through needle-sized entry points, yet can be configured into truss-like structures capable of dexterous movement and large force application. They can also be reconfigured as needed during a surgical procedure. Since CRISP robots are elastic, they will deform when subjected to external forces or other perturbations. In this paper, we explore how to combine sensor information with mechanics-based models for CRISP robots to estimate their shapes under applied loads. The end result is a shape sensing framework for CRISP robots that will enable future research on control under applied loads, autonomous motion, force sensing, and other robot behaviors.

Nanopatterned reconfigurable spin-textures for magnonics

Science.gov (United States)

Albisetti, E.; Petti, D.; Pancaldi, M.; Madami, M.; Tacchi, S.; Curtis, J.; King, W. P.; Papp, A.; Csaba, G.; Porod, W.; Vavassori, P.; Riedo, E.; Bertacco, R.

The control of spin-waves holds the promise to enable energy-efficient information transport and wave-based computing. Conventionally, the engineering of spin-waves is achieved via physically patterning magnetic structures such as magnonic crystals and micro-nanowires. We demonstrate a new concept for creating reconfigurable magnonic nanostructures, by crafting at the nanoscale the magnetic anisotropy landscape of a ferromagnet exchange-coupled to an antiferromagnet. By performing a highly localized field cooling with the hot tip of a scanning probe microscope, magnetic structures, with arbitrarily oriented magnetization and tunable unidirectional anisotropy, are patterned without modifying the film chemistry and topography. We demonstrate that, in such structures, the spin-wave excitation and propagation can be spatially controlled at remanence, and can be tuned by external magnetic fields. This opens the way to the use of nanopatterned spin-textures, such as domains and domain walls, for exciting and manipulating magnons in reconfigurable nanocircuits. Partially funded by the EC through project SWING (no. 705326).

Designing a socio-spatial need indicator for urban social services analysis and decision making. A case study

Directory of Open Access Journals (Sweden)

Antonio Morenos Jiménez

2015-01-01

Full Text Available Decision taking on social services requires, as a previous step, to appraise the human needs and their spatial distribution, a key issue particularly sensitive in less developed zones or during economic crisis periods, as far as socio-spatial cohesion is then strongly challenged. Vari-ous methods have been used for measuring social needs, provided that these are diverse in nature and sometimes elusive. Incorporating the spatial dimension in this task involves an additional challenge, but the results add meaningful value for socio-spatial planning. Along this concern, in this work it is tackled the problema of estimating the needs typically met by local social service centers (SSC. To this end, it is designed a novel statistical indicator for intra-urban zones, incorporating in the formula the main components of the actual observed de-mand as well as the per capita income, to take into account the relevant spatial equity principle. Using a geographical information systems (GIS, the indicator for estimating SSC need has been experimentally obtained for two types of spatial units in the city of Madrid: municipal districts and small statistical areas, looking for complementary applied uses. The results reveal the intra-urban inequalities for these types of needs and may support public decision making on spatial provision and location of this kind of social resources. In addition, a preliminary and statistically based exam of the indicator potentialities and limitations is carried out for both types of spatial units.

Impact of reconfiguration period and photovoltaic penetration on distribution grid reconfiguration

DEFF Research Database (Denmark)

Chittur Ramaswamy, Parvathy; Deconinck, Geert; Pillai, Jayakrishnan Radhakrishna

2014-01-01

of reconfiguration and its impact on network losses in the context of time-varying load. Though reconfiguring a network reduces the losses, this paper calls for a comparison of number of switching vs. the loss reduction in order to decide the period of reconfiguration. This paper considers also the impact of varying...... photovoltaic (PV) penetration on the resulting optimal configuration. It validates the method of using a parameter namely minimum loss reduction parameter to avoid tedious computational efforts in finding the optimal configuration when an infinitesimal change in PV penetration occurs....

Roles and Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Dvinge, Nicolai; Schultz, Ulrik Pagh; Christensen, David Johan

2007-01-01

A self-reconfigurable robot is a robotic device that can change its own shape. Self-reconfigurable robots are commonly built from multiple identical modules that can manipulate each other to change the shape of the robot. The robot can also perform tasks such as locomotion without changing shape......., significantly simplifying the task of programming self-reconfigurable robots. Our language fully supports programming the ATRON self-reconfigurable robot, and has been used to implement several controllers running both on the physical modules and in simulation.......A self-reconfigurable robot is a robotic device that can change its own shape. Self-reconfigurable robots are commonly built from multiple identical modules that can manipulate each other to change the shape of the robot. The robot can also perform tasks such as locomotion without changing shape....... Programming a modular, self-reconfigurable robot is however a complicated task: the robot is essentially a real-time, distributed embedded system, where control and communication paths often are tightly coupled to the current physical configuration of the robot. To facilitate the task of programming modular...

Socio-Economic Predictors and Distribution of Tuberculosis Incidence in Beijing, China: A Study Using a Combination of Spatial Statistics and GIS Technology.

Science.gov (United States)

Mahara, Gehendra; Yang, Kun; Chen, Sipeng; Wang, Wei; Guo, Xiuhua

2018-03-21

Evidence shows that multiple factors, such as socio-economic status and access to health care facilities, affect tuberculosis (TB) incidence. However, there is limited literature available with respect to the correlation between socio-economic/health facility factors and tuberculosis incidence. This study aimed to explore the relationship between TB incidence and socio-economic/health service predictors in the study settings. A retrospective spatial regression analysis was carried out based on new sputum smear-positive pulmonary TB cases in Beijing districts. Global Moran's I analysis was adopted to detect the spatial dependency followed by spatial regression models (spatial lag model, and spatial error model) along with the ordinary least square model were applied to examine the correlation between TB incidence and predictors. A high incidence of TB was seen in densely populated districts in Beijing, e.g., Haidian, Mentougou, and Xicheng. After comparing the R², log-likelihood, and Akaike information criterion (AIC) values among three models, the spatial error model (R² = 0.413; Log Likelihood = -591; AIC = 1199.76) identified the best model fit for the spatial regression model. The study showed that the number of beds in health institutes ( p < 0.001) and per capita gross domestic product (GDP) ( p = 0.025) had a positive effect on TB incidence, whereas population density ( p < 0.001) and migrated population ( p < 0.001) had an adverse impact on TB incidence in the study settings. High TB incidence districts were detected in urban and densely populated districts in Beijing. Our findings suggested that socio-economic predictors influence TB incidence. These findings may help to guide TB control programs and promote targeted intervention.

Classification of Reconfiguration Resources and Lead Time for Reconfigurable Manufacturing Systems

NARCIS (Netherlands)

Ing. Erik Puik; Daniël Telgen; Leo van Moergestel; Darek Ceglarek

2014-01-01

From the article: Manufacturing technology can improve the turnover of a company if it enables fast market introduction for volume production. Reconfigurable equipment is developed to meet the growing demand for more agile production. Modular reconfiguration, defined as changing the structure of

Transformational electronics are now reconfiguring

KAUST Repository

Rojas, Jhonathan Prieto

2015-05-22

Current developments on enhancing our smart living experience are leveraging the increased interest for novel systems that can be compatible with foldable, wrinkled, wavy and complex geometries and surfaces, and thus become truly ubiquitous and easy to deploy. Therefore, relying on innovative structural designs we have been able to reconfigure the physical form of various materials, to achieve remarkable mechanical flexibility and stretchability, which provides us with the perfect platform to develop enhanced electronic systems for application in entertainment, healthcare, fitness and wellness, military and manufacturing industry. Based on these novel structural designs we have developed a siliconbased network of hexagonal islands connected through double-spiral springs, forming an ultra-stretchable (~1000%) array for full compliance to highly asymmetric shapes and surfaces, as well as a serpentine design used to show an ultrastretchable (~800%) and flexible, spatially reconfigurable, mobile, metallic thin film copper (Cu)-based, body-integrated and non-invasive thermal heater with wireless controlling capability, reusability, heating-adaptability and affordability due to low-cost complementary metal oxide semiconductor (CMOS)-compatible integration. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Individual and Interactive Effects of Socio-Ecological Factors on Dengue Fever at Fine Spatial Scale: A Geographical Detector-Based Analysis.

Science.gov (United States)

Cao, Zheng; Liu, Tao; Li, Xing; Wang, Jin; Lin, Hualiang; Chen, Lingling; Wu, Zhifeng; Ma, Wenjun

2017-07-17

Background : Large spatial heterogeneity was observed in the dengue fever outbreak in Guangzhou in 2014, however, the underlying reasons remain unknown. We examined whether socio-ecological factors affected the spatial distribution and their interactive effects. Methods : Moran's I was applied to first examine the spatial cluster of dengue fever in Guangzhou. Nine socio-ecological factors were chosen to represent the urbanization level, economy, accessibility, environment, and the weather of the 167 townships/streets in Guangzhou, and then the geographical detector was applied to analyze the individual and interactive effects of these factors on the dengue outbreak. Results : Four clusters of dengue fever were identified in Guangzhou in 2014, including one hot spot in the central area of Guangzhou and three cold spots in the suburban districts. For individual effects, the temperature ( q = 0.33) was the dominant factor of dengue fever, followed by precipitation ( q = 0.24), road density ( q = 0.24), and water body area ( q = 0.23). For the interactive effects, the combination of high precipitation, high temperature, and high road density might result in increased dengue fever incidence. Moreover, urban villages might be the dengue fever hot spots. Conclusions : Our study suggests that some socio-ecological factors might either separately or jointly influence the spatial distribution of dengue fever in Guangzhou.

Advances in Reconfigurable Mechanisms and Robots I

CERN Document Server

Zoppi, Matteo; Kong, Xianwen

2012-01-01

Advances in Reconfigurable Mechanisms and Robots I provides a selection of key papers presented in The Second ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012) held on 9th -11th  July 2012 in Tianjin, China. This ongoing series of conferences will be covered in this ongoing collection of books.   A total of seventy-eight papers are divided into seven parts to cover the topology, kinematics and design of reconfigurable mechanisms with the reconfiguration theory, analysis and synthesis, and present the current research and development in the field of reconfigurable mechanisms including reconfigurable parallel mechanisms. In this aspect, the recent study and development of reconfigurable robots are further presented with the analysis and design and with their control and development. The bio-inspired mechanisms and subsequent reconfiguration are explored in the challenging fields of rehabilitation and minimally invasive surgery. Advances in Reconfigurable Mechanisms and ...

Spatial prevalence of intellectual disability and related socio-demographic factors in Iran, using GWR: Case study (2006

Directory of Open Access Journals (Sweden)

Ali Goli

2014-01-01

Full Text Available Background: Although intellectual disability (ID is a common disability in Iran, there is no investigation on the spatial distribution pattern of these patients in national level and the spatial maps for recognition the areas with higher prevalence of IDs and local neighborhoods of these regions or effect of socio-demographic factor on this scattering is not still available. This proposition motivated us to assess the population with ID in our country. Methods: In a cross-sectional study, we applied Moran′s Index (Moran′s I which includes information about the strength of the neighboring association between counties, as global univariate distribution assessment. A geographically weighted regression was used to explore relation between ID patient′s prevalence and some socio-demographic factors (migration and illiteracy rate, physician number (PN/10,000 people and health-care centers (HCCs/10,000 people. Results: We found that spatial clusters of ID patients exist among Iran counties (Moran′s I = 0.36, P 0.3. Conclusions: According to the results, our Initial hypothesis about the existence of spatial clusters in distribution of people with ID in Iran was proven. Spatial autocorrelation between migration and illiteracy rate and prevalence of patients with ID was shown and was in agreement with our hypothesis. However, our supposition that the prevalence should have inverse relationship with PN and HCC was rejected.

Levelling the Reading Gap: A Socio-spatial Study of School Libraries and Reading in Singapore

Science.gov (United States)

Loh, Chin Ee

2016-01-01

This article takes a comparative socio-spatial approach at the intersection of social class and reading politics to provide a fresh way of examining school reading policies and practices, unearthing previously hidden spaces of inequity for reading intervention. The juxtaposition of two nested case studies in Singapore, one of an elite all-boys'…

Introduction to Reconfigurable Supercomputing

CERN Document Server

Lanzagorta, Marco; Rosenberg, Robert

2010-01-01

This book covers technologies, applications, tools, languages, procedures, advantages, and disadvantages of reconfigurable supercomputing using Field Programmable Gate Arrays (FPGAs). The target audience is the community of users of High Performance Computers (HPe who may benefit from porting their applications into a reconfigurable environment. As such, this book is intended to guide the HPC user through the many algorithmic considerations, hardware alternatives, usability issues, programming languages, and design tools that need to be understood before embarking on the creation of reconfigur

A reconfiguration of the sex trade

DEFF Research Database (Denmark)

Elmes, Jocelyn; Skovdal, Morten; Nhongo, Kundai

2017-01-01

a unique opportunity to study community perceptions of the impact of socio-economic upheaval on the sex trade. We conducted focus group discussions with 122 community members in rural eastern Zimbabwe in January-February 2009. Groups were homogeneous by gender and occupation and included female sex workers......Understanding the dynamic nature of sex work is important for explaining the course of HIV epidemics. While health and development interventions targeting sex workers may alter the dynamics of the sex trade in particular localities, little has been done to explore how large-scale social...... and structural changes, such as economic recessions–outside of the bounds of organizational intervention–may reconfigure social norms and attitudes with regards to sex work. Zimbabwe’s economic collapse in 2009, following a period (2000–2009) of economic decline, within a declining HIV epidemic, provides...

Nanopatterning spin-textures: A route to reconfigurable magnonics

Directory of Open Access Journals (Sweden)

E. Albisetti

2017-05-01

Full Text Available Magnonics is envisioned to enable highly efficient data transport and processing, by exploiting propagating perturbations in the spin-texture of magnetic materials. Despite the demonstrations of a plethora of proof-of-principle devices, the efficient excitation, transport and manipulation of spin-waves at the nanoscale is still an open challenge. Recently, we demonstrated that the spin-wave excitation and propagation can be controlled by nanopatterning reconfigurable spin-textures in a continuous exchange biased ferromagnetic film. Here, we show that by patterning 90° stripe-shaped magnetic domains, we spatially modulate the spin-wave excitation in a continuous film, and that by applying an external magnetic field we can reversibly “switch-off” the spin-wave excitation. This opens the way to the use of nanopatterned spin-textures, such as domains and domain walls, for exciting and manipulating magnons in reconfigurable nanocircuits.

Nested Reconfigurable Robots: Theory, Design, and Realization

Directory of Open Access Journals (Sweden)

Ning Tan

2015-07-01

Full Text Available Rather than the conventional classification method, we propose to divide modular and reconfigurable robots into intra-, inter-, and nested reconfigurations. We suggest designing the robot with nested reconfigurability, which utilizes individual robots with intra-reconfigurability capable of combining with other homogeneous/heterogeneous robots (inter-reconfigurability. The objective of this approach is to generate more complex morphologies for performing specific tasks that are far from the capabilities of a single module or to respond to programmable assembly requirements. In this paper, we discuss the theory, concept, and initial mechanical design of Hinged-Tetro, a self-reconfigurable module conceived for the study of nested reconfiguration. Hinged-Tetro is a mobile robot that uses the principle of hinged dissection of polyominoes to transform itself into any of the seven one-sided tetrominoes in a straightforward way. The robot can also combine with other modules for shaping complex structures or giving rise to a robot with new capabilities. Finally, the validation experiments verify the nested reconfigurability of Hinged-Tetro. Extensive tests and analyses of intra-reconfiguration are provided in terms of energy and time consumptions. Experiments using two robots validate the inter-reconfigur ability of the proposed module.

Reconfigurable network processing platforms

NARCIS (Netherlands)

Kachris, C.

2007-01-01

This dissertation presents our investigation on how to efficiently exploit reconfigurable hardware to design flexible, high performance, and power efficient network devices capable to adapt to varying processing requirements of network applications and traffic. The proposed reconfigurable network

Reconfiguration of distribution nets

International Nuclear Information System (INIS)

Latorre Bayona, Gerardo; Angarita Marquez, Jorge Luis

2000-01-01

Starting of the location of the reconfiguration problem inside the context of the operation of distribution nets, of the quality indicators definition and of the presentation of the alternatives more used for reduction of technical losses, they are related diverse reconfiguration methodologies proposed in the technical literature, pointing out their three principals limitations; also are presents the results of lost obtained starting from simulation works carried out in distribution circuits of the ESSA ESP, which permitting to postulate the reconfiguration of nets like an excellent alternative to reduce technical losses

Wavenumber locking and pattern formation in spatially forced systems

International Nuclear Information System (INIS)

Manor, Rotem; Meron, Ehud; Hagberg, Aric

2009-01-01

We study wavenumber locking and pattern formation resulting from weak spatially periodic one-dimensional forcing of two-dimensional systems. We consider systems that produce stationary or traveling stripe patterns when unforced and apply forcing aligned with the stripes. Forcing at close to twice the pattern wavenumber selects, stabilizes, or creates resonant stripes locked at half the forcing wavenumber. If the mismatch between the forcing and pattern wavenumber is high we find that the pattern still locks but develops a wave vector component perpendicular to the forcing direction and forms rectangular and oblique patterns. When the unforced system supports traveling waves, resonant rectangular patterns remain stationary but oblique patterns travel in a direction orthogonal to the traveling waves.

EXPLORING SOCIO-SPATIAL ASPECTS OF TRADITIONAL SOUQS: The Case of Souq Mutrah, Oman

Directory of Open Access Journals (Sweden)

Ahood Abdullah Al-Maimani

2014-03-01

Full Text Available Traditional souqs in the Arabian Peninsula continue to be major focal points of trade, commerce, exchange, entertainment and social interaction. Souq Mutrah, in Muscat, Sultanate of Oman is one of these important regional souqs. This paper develops an experiential walkthrough assessment of three selected urban spaces - market places within Souq Mutrah by examining their spatial and socio-cultural aspects while implementing direct systematic observation and behavioral mapping procedure. The findings contribute to an in-depth understanding of the qualities of the three spaces and the resulting use, activities, and behavior representative of the inhabitants' spatial experience in those spaces. Assessment results reveal important outcomes that include that safety and security is the significant missing factor in Souq Mutrah spaces, which if provided, can attract more users while supporting their needs.

Spatial variation and socio-economic determinants of Plasmodium falciparum infection in northeastern Tanzania

DEFF Research Database (Denmark)

Mmbando, Bruno P; Kamugisha, Mathias L; Lusingu, John P

2011-01-01

system (GPS) unit. The effects of risk factors were determined using generalized estimating equation and spatial risk of P. falciparum infection was modelled using a kernel (non-parametric) method. RESULTS: There was a significant spatial variation of P. falciparum infection, and urban areas were......ABSTRACT: BACKGROUND: Malaria due to Plasmodium falciparum is the leading cause of morbidity and mortality in Tanzania. According to health statistics, malaria accounts for about 30% and 15% of hospital admissions and deaths, respectively. The risk of P. falciparum infection varies across...... the country. This study describes the spatial variation and socio-economic determinants of P. falciparum infection in northeastern Tanzania. METHODS: The study was conducted in 14 villages located in highland, lowland and urban areas of Korogwe district. Four cross-sectional malaria surveys involving...

MEMS-Reconfigurable Metamaterials and Antenna Applications

Directory of Open Access Journals (Sweden)

Tomislav Debogovic

2014-01-01

Full Text Available This paper reviews some of our contributions to reconfigurable metamaterials, where dynamic control is enabled by microelectromechanical systems (MEMS technology. First, we show reconfigurable composite right-/left-handed transmission lines (CRLH-TLs having state of the art phase velocity variation and loss, thereby enabling efficient reconfigurable phase shifters and leaky-wave antennas (LWA. Second, we present very low loss metasurface designs with reconfigurable reflection properties, applicable in reflectarrays and partially reflective surface (PRS antennas. All the presented devices have been fabricated and experimentally validated. They operate in X- and Ku-bands.

Dynamic Reconfiguration in Planetary Exploration

DEFF Research Database (Denmark)

Cohn, Marisa

2014-01-01

In taking into account the ways in which material and social realms are constitutively entangled within organizations, it is rhetorically tempting to say that technologies and social structures reconfigure each other. But what does it mean to reconfigure? How does one "figure" the other and how do...... we fully embrace a mutually constitutive relationship when examining fluid relations? This paper delves into these questions by exploring how physical, social, material, technological, and organizational arrangements dynamically reconfigure each other in the duration of organizational practice. Using...... be gained by focusing attention on the dynamic reconfigurations between social and material realms. In so doing, we call attention to the ways in which current sociomaterial perspectives have difficulty articulating the shifting, figural, asymmetric and dynamic negotiations between people, social structures...

Program Execution on Reconfigurable Multicore Architectures

Directory of Open Access Journals (Sweden)

Sanjiva Prasad

2016-06-01

Full Text Available Based on the two observations that diverse applications perform better on different multicore architectures, and that different phases of an application may have vastly different resource requirements, Pal et al. proposed a novel reconfigurable hardware approach for executing multithreaded programs. Instead of mapping a concurrent program to a fixed architecture, the architecture adaptively reconfigures itself to meet the application's concurrency and communication requirements, yielding significant improvements in performance. Based on our earlier abstract operational framework for multicore execution with hierarchical memory structures, we describe execution of multithreaded programs on reconfigurable architectures that support a variety of clustered configurations. Such reconfiguration may not preserve the semantics of programs due to the possible introduction of race conditions arising from concurrent accesses to shared memory by threads running on the different cores. We present an intuitive partial ordering notion on the cluster configurations, and show that the semantics of multithreaded programs is always preserved for reconfigurations "upward" in that ordering, whereas semantics preservation for arbitrary reconfigurations can be guaranteed for well-synchronised programs. We further show that a simple approximate notion of efficiency of execution on the different configurations can be obtained using the notion of amortised bisimulations, and extend it to dynamic reconfiguration.

Socio-economic and Climate Factors Associated with Dengue Fever Spatial Heterogeneity: A Worked Example in New Caledonia

Science.gov (United States)

Teurlai, Magali; Menkès, Christophe Eugène; Cavarero, Virgil; Degallier, Nicolas; Descloux, Elodie; Grangeon, Jean-Paul; Guillaumot, Laurent; Libourel, Thérèse; Lucio, Paulo Sergio; Mathieu-Daudé, Françoise; Mangeas, Morgan

2015-01-01

Background/Objectives Understanding the factors underlying the spatio-temporal distribution of infectious diseases provides useful information regarding their prevention and control. Dengue fever spatio-temporal patterns result from complex interactions between the virus, the host, and the vector. These interactions can be influenced by environmental conditions. Our objectives were to analyse dengue fever spatial distribution over New Caledonia during epidemic years, to identify some of the main underlying factors, and to predict the spatial evolution of dengue fever under changing climatic conditions, at the 2100 horizon. Methods We used principal component analysis and support vector machines to analyse and model the influence of climate and socio-economic variables on the mean spatial distribution of 24,272 dengue cases reported from 1995 to 2012 in thirty-three communes of New Caledonia. We then modelled and estimated the future evolution of dengue incidence rates using a regional downscaling of future climate projections. Results The spatial distribution of dengue fever cases is highly heterogeneous. The variables most associated with this observed heterogeneity are the mean temperature, the mean number of people per premise, and the mean percentage of unemployed people, a variable highly correlated with people's way of life. Rainfall does not seem to play an important role in the spatial distribution of dengue cases during epidemics. By the end of the 21st century, if temperature increases by approximately 3°C, mean incidence rates during epidemics could double. Conclusion In New Caledonia, a subtropical insular environment, both temperature and socio-economic conditions are influencing the spatial spread of dengue fever. Extension of this study to other countries worldwide should improve the knowledge about climate influence on dengue burden and about the complex interplay between different factors. This study presents a methodology that can be used as a

High spatial resolution Kelvin probe force microscopy with coaxial probes

International Nuclear Information System (INIS)

Brown, Keith A; Westervelt, Robert M; Satzinger, Kevin J

2012-01-01

Kelvin probe force microscopy (KPFM) is a widely used technique to measure the local contact potential difference (CPD) between an AFM probe and the sample surface via the electrostatic force. The spatial resolution of KPFM is intrinsically limited by the long range of the electrostatic interaction, which includes contributions from the macroscopic cantilever and the conical tip. Here, we present coaxial AFM probes in which the cantilever and cone are shielded by a conducting shell, confining the tip–sample electrostatic interaction to a small region near the end of the tip. We have developed a technique to measure the true CPD despite the presence of the shell electrode. We find that the behavior of these probes agrees with an electrostatic model of the force, and we observe a factor of five improvement in spatial resolution relative to unshielded probes. Our discussion centers on KPFM, but the field confinement offered by these probes may improve any variant of electrostatic force microscopy. (paper)

Accelerating artificial intelligence with reconfigurable computing

Science.gov (United States)

Cieszewski, Radoslaw

Reconfigurable computing is emerging as an important area of research in computer architectures and software systems. Many algorithms can be greatly accelerated by placing the computationally intense portions of an algorithm into reconfigurable hardware. Reconfigurable computing combines many benefits of both software and ASIC implementations. Like software, the mapped circuit is flexible, and can be changed over the lifetime of the system. Similar to an ASIC, reconfigurable systems provide a method to map circuits into hardware. Reconfigurable systems therefore have the potential to achieve far greater performance than software as a result of bypassing the fetch-decode-execute operations of traditional processors, and possibly exploiting a greater level of parallelism. Such a field, where there is many different algorithms which can be accelerated, is an artificial intelligence. This paper presents example hardware implementations of Artificial Neural Networks, Genetic Algorithms and Expert Systems.

Spatially Analyzing the Inequity of the Hong Kong Urban Heat Island by Socio-Demographic Characteristics

Directory of Open Access Journals (Sweden)

Man Sing Wong

2016-03-01

Full Text Available Recent studies have suggested that some disadvantaged socio-demographic groups face serious environmental-related inequities in Hong Kong due to the rising ambient urban temperatures. Identifying heat-vulnerable groups and locating areas of Surface Urban Heat Island (SUHI inequities is thus important for prioritizing interventions to mitigate death/illness rates from heat. This study addresses this problem by integrating methods of remote sensing retrieval, logistic regression modelling, and spatial autocorrelation. In this process, the SUHI effect was first estimated from the Land Surface Temperature (LST derived from a Landsat image. With the scale assimilated to the SUHI and socio-demographic data, a logistic regression model was consequently adopted to ascertain their relationships based on Hong Kong Tertiary Planning Units (TPUs. Lastly, inequity “hotspots” were derived using spatial autocorrelation methods. Results show that disadvantaged socio-demographic groups were significantly more prone to be exposed to an intense SUHI effect: over half of 287 TPUs characterized by age groups of 60+ years, secondary and matriculation education attainment, widowed, divorced and separated, low and middle incomes, and certain occupation groups of workers, have significant Odds Ratios (ORs larger than 1.2. It can be concluded that a clustering analysis stratified by age, income, educational attainment, marital status, and occupation is an effective way to detect the inequity hotspots of SUHI exposure. Additionally, inequities explored using income, marital status and occupation factors were more significant than the age and educational attainment in these areas. The derived maps and model can be further analyzed in urban/city planning, in order to mitigate the physical and social causes of the SUHI effect.

Implementing Workflow Reconfiguration in WS-BPEL

DEFF Research Database (Denmark)

Mazzara, Manuel; Dragoni, Nicola; Zhou, Mu

2012-01-01

This paper investigates the problem of dynamic reconfiguration by means of a workflow-based case study used for discussion. We state the requirements on a system implementing the workflow and its reconfiguration, and we describe the system’s design in BPMN. WS-BPEL, a language that would not natu......This paper investigates the problem of dynamic reconfiguration by means of a workflow-based case study used for discussion. We state the requirements on a system implementing the workflow and its reconfiguration, and we describe the system’s design in BPMN. WS-BPEL, a language that would...... not naturally support dynamic change, is used as a target for implementation. The WS-BPEL recovery framework is here exploited to implement the reconfiguration using principles derived from previous research in process algebra and two mappings from BPMN to WS-BPEL are presented, one automatic and only mostly...

Nanopatterning reconfigurable magnetic landscapes via thermally assisted scanning probe lithography

Science.gov (United States)

Albisetti, E.; Petti, D.; Pancaldi, M.; Madami, M.; Tacchi, S.; Curtis, J.; King, W. P.; Papp, A.; Csaba, G.; Porod, W.; Vavassori, P.; Riedo, E.; Bertacco, R.

2016-06-01

The search for novel tools to control magnetism at the nanoscale is crucial for the development of new paradigms in optics, electronics and spintronics. So far, the fabrication of magnetic nanostructures has been achieved mainly through irreversible structural or chemical modifications. Here, we propose a new concept for creating reconfigurable magnetic nanopatterns by crafting, at the nanoscale, the magnetic anisotropy landscape of a ferromagnetic layer exchange-coupled to an antiferromagnetic layer. By performing localized field cooling with the hot tip of a scanning probe microscope, magnetic structures, with arbitrarily oriented magnetization and tunable unidirectional anisotropy, are reversibly patterned without modifying the film chemistry and topography. This opens unforeseen possibilities for the development of novel metamaterials with finely tuned magnetic properties, such as reconfigurable magneto-plasmonic and magnonic crystals. In this context, we experimentally demonstrate spatially controlled spin wave excitation and propagation in magnetic structures patterned with the proposed method.

Trustworthy reconfigurable systems enhancing the security capabilities of reconfigurable hardware architectures

CERN Document Server

Feller, Thomas

2014-01-01

?Thomas Feller sheds some light on trust anchor architectures fortrustworthy reconfigurable systems. He is presenting novel concepts enhancing the security capabilities of reconfigurable hardware.Almost invisible to the user, many computer systems are embedded into everyday artifacts, such as cars, ATMs, and pacemakers. The significant growth of this market segment within the recent years enforced a rethinking with respect to the security properties and the trustworthiness of these systems. The trustworthiness of a system in general equates to the integrity of its system components. Hardware-b

New Kids on the Block: the Rise of the BRIC and the Reconfiguration of Global Economic Ties

Directory of Open Access Journals (Sweden)

Martin Müller

2011-12-01

Full Text Available This contribution examines the rise of the BRICs (Brazil-Russia-India-China through the lens of central socio-economic indicators, including the World Bank Worldwide Governance Indicators and the World Values Survey. It charts the shift in economic weight and emerging reconfiguration of economic ties as evidenced in foreign direct investment (FDI and the emergence of transnational corporations (TNCs and considers the resulting challenges for intercultural contact at different scale levels through two brief case studies.

Concept for room temperature single-spin tunneling force microscopy with atomic spatial resolution

Science.gov (United States)

Payne, Adam

A study of a force detected single-spin magnetic resonance measurement concept with atomic spatial resolution is presented. The method is based upon electrostatic force detection of spin-selection rule controlled single electron tunneling between two electrically isolated paramagnetic states. Single-spin magnetic resonance detection is possible by measuring the force detected tunneling charge noise on and off spin resonance. Simulation results of this charge noise, based upon physical models of the tunneling and spin physics, are directly compared to measured atomic force microscopy (AFM) system noise. The results show that the approach could provide single-spin measurement of electrically isolated defect states with atomic spatial resolution at room temperature.

Socio-spatial violence and inequality: conceptual considerations concerning the geographical development in Latin America

Directory of Open Access Journals (Sweden)

Martin Scarpacci

2016-06-01

Full Text Available This theoretical article develops the conceptual foundations of contemporary socio-spatial building of territory in the Latin American region. In its initial phase we reason on how Strategic Planning is installed in this region of the world. According to various researchers, this model of urban intervention transforms the city into a luxury merchandise destined for an elite group of potential buyers (Vainer, 2000: 83 which has strengthened the position of speculative capital (Ciccolella, 2005: 106. The new unequal urban pattern, developed in North America since the sixties of last century and that expanded into Europe and South America during the following decades. In addition, to understand the logic that defines the urban space analyzed and to reinforce Vainer and Ciccolella´s theses, the competitiveness variables are analyzed as well as the society of consumption; fragmentation and urban segregation and finally space racialization. The research examines these variables in order to provide light into building a more balanced socio-spatial territory, rivaling with the dominant trend to territorialize uneven geographical development, a goal that gains relevance when considering that the Latin American region has the highest rates of inequality and violence in the world. However, governments continue appealing to correct these facts with more violence and repression, without considering structural issues such as the subordinated and dependent economic model, thus aggravating social conditions through authoritarian actions that combat the consequences and not the causes.

Developing Talented Soccer Players: An Analysis of Socio-Spatial Factors as Possible Key Constraints

Directory of Open Access Journals (Sweden)

Serra-Olivares Jaime

2016-12-01

Full Text Available Most studies on the identification and development of soccer talent have been one-dimensional in nature. Although some multi-dimensional analyses have been conducted, few research studies have assessed in any depth the socio-spatial factors influencing talent development. The aim of this particular study was to analyse variations in the international representation of clubs (n = 821 and countries (n = 59 in the development of players who took part in the 2014 FIFA Soccer World Cup. Clubs and countries were ranked and divided into quartiles according to the number of players developed between the ages of 15 and 21 (clubs and countries that developed players for at least three years between these ages and the number of official league matches played by these players up to the age of 23. Significant variations were observed between clubs in terms of the number of developed players who took part in the World Cup and the number of official league matches played by these players up to the age of 23 (p < .05, and also between countries (p < .05. The findings reveal the need to carry out more in-depth studies into the type of training and competition engaged in by elite players in the period of development between the ages of 15 and 21. It may be the case that these factors are potentially decisive socio-spatial constraints in the development of soccer talent.

Force loading explains spatial sensing of ligands by cells

Science.gov (United States)

Oria, Roger; Wiegand, Tina; Escribano, Jorge; Elosegui-Artola, Alberto; Uriarte, Juan Jose; Moreno-Pulido, Cristian; Platzman, Ilia; Delcanale, Pietro; Albertazzi, Lorenzo; Navajas, Daniel; Trepat, Xavier; García-Aznar, José Manuel; Cavalcanti-Adam, Elisabetta Ada; Roca-Cusachs, Pere

2017-12-01

Cells can sense the density and distribution of extracellular matrix (ECM) molecules by means of individual integrin proteins and larger, integrin-containing adhesion complexes within the cell membrane. This spatial sensing drives cellular activity in a variety of normal and pathological contexts. Previous studies of cells on rigid glass surfaces have shown that spatial sensing of ECM ligands takes place at the nanometre scale, with integrin clustering and subsequent formation of focal adhesions impaired when single integrin-ligand bonds are separated by more than a few tens of nanometres. It has thus been suggested that a crosslinking ‘adaptor’ protein of this size might connect integrins to the actin cytoskeleton, acting as a molecular ruler that senses ligand spacing directly. Here, we develop gels whose rigidity and nanometre-scale distribution of ECM ligands can be controlled and altered. We find that increasing the spacing between ligands promotes the growth of focal adhesions on low-rigidity substrates, but leads to adhesion collapse on more-rigid substrates. Furthermore, disordering the ligand distribution drastically increases adhesion growth, but reduces the rigidity threshold for adhesion collapse. The growth and collapse of focal adhesions are mirrored by, respectively, the nuclear or cytosolic localization of the transcriptional regulator protein YAP. We explain these findings not through direct sensing of ligand spacing, but by using an expanded computational molecular-clutch model, in which individual integrin-ECM bonds—the molecular clutches—respond to force loading by recruiting extra integrins, up to a maximum value. This generates more clutches, redistributing the overall force among them, and reducing the force loading per clutch. At high rigidity and high ligand spacing, maximum recruitment is reached, preventing further force redistribution and leading to adhesion collapse. Measurements of cellular traction forces and actin flow speeds

Spatial data on energy, environmental, and socio-economic themes at Oak Ridge National Laboratory: 1977 inventory

Energy Technology Data Exchange (ETDEWEB)

Shriner, C.R. (ed.)

1978-05-01

Spatial data files covering energy, environmental, and socio-economic themes at Oak Ridge National Laboratory are described. The textual descriptions are maintained as part of the Oak Ridge Computerized Hierarchical Information System and are available for on-line retrieval using the ORLOOK program. Descriptions provide abstracts, geographic coverage, original data source, availability limitations, and contact person. Most of the files described in this document are available on a cost-recovery basis.

Reconfigurable Autonomy for Future Planetary Rovers

Science.gov (United States)

Burroughes, Guy

Extra-terrestrial Planetary rover systems are uniquely remote, placing constraints in regard to communication, environmental uncertainty, and limited physical resources, and requiring a high level of fault tolerance and resistance to hardware degradation. This thesis presents a novel self-reconfiguring autonomous software architecture designed to meet the needs of extraterrestrial planetary environments. At runtime it can safely reconfigure low-level control systems, high-level decisional autonomy systems, and managed software architecture. The architecture can perform automatic Verification and Validation of self-reconfiguration at run-time, and enables a system to be self-optimising, self-protecting, and self-healing. A novel self-monitoring system, which is non-invasive, efficient, tunable, and autonomously deploying, is also presented. The architecture was validated through the use-case of a highly autonomous extra-terrestrial planetary exploration rover. Three major forms of reconfiguration were demonstrated and tested: first, high level adjustment of system internal architecture and goal; second, software module modification; and third, low level alteration of hardware control in response to degradation of hardware and environmental change. The architecture was demonstrated to be robust and effective in a Mars sample return mission use-case testing the operational aspects of a novel, reconfigurable guidance, navigation, and control system for a planetary rover, all operating in concert through a scenario that required reconfiguration of all elements of the system.

Towards sustainable regions: the spatial distribution of electric vehicles’ recharging stations from a socio-economic perspective

DEFF Research Database (Denmark)

Christensen, Linda; Jensen, Thomas Christian; Kaplan, Sigal

2012-01-01

-free, low-emission vehicles due to the rising oil prices and global warming. Adequate on-road EV recharging infrastructure is essential in the transformation of EV into a practical transport option and the wide-scale market penetration of EV. Nevertheless, the efficient spatial distribution of EV recharging...... is rarely explored. current study focuses on assessing the demand driven need for on-road EV recharging stations, and finding their efficient spatial distribution, while accounting for economic, social, environmental and land-use considerations. The analysis, conducted for Demark, consists of four steps...... a discrete choice model, estimated on the basis of a stated preference survey. Last, the feasibility of the optimal EV spatial distribution of the EV charging stations is analyzed, based on the Danish official socio-economic framework (TERESA). Results show: (i) the number of required recharging stations...

Elements of Autonomous Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Christensen, David Johan

In this thesis, we study several central elements of autonomous self-reconfigurable modular robots. Unlike conventional robots such robots are: i) Modular, since robots are assembled from numerous robotic modules. ii) Reconfigurable, since the modules can be combined in a variety of ways. iii) Self......-reconfigurable, since the modules themselves are able to change how they are combined. iv) Autonomous, since robots control themselves without human guidance. Such robots are attractive to study since they in theory have several desirable characteristics, such as versatility, reliability and cheapness. In practice...... however, it is challenging to realize such characteristics since state-of-the-art systems and solutions suffer from several inherent technical and theoretical problems and limitations. In this thesis, we address these challenges by exploring four central elements of autonomous self-reconfigurable modular...

Space power(s) gender – socio- spatial control of prostitution and the bourgeois gender order

OpenAIRE

Ruhne, Renate

2015-01-01

Using the example of the city of Frankfurt am Main the paper    examines the conflict relationship between increasing acceptance and persistent demands for stringent controls that characterizes the perception of prostitution in Germany today. Focusing on prevalent socio-spatial forms of control, that aim at excluding the field from « normal » everyday life, the first part will demonstrate how and why prostitution, though legalized and more and more accepted, remains   powerfully stigmatized t...

SOCIO-SPATIAL INTEGRATION OF LANDSCAPE BACK LANE OF HOUSING AT BANDAR BARU NILAI: PRIVACY AND COMMUNITY

Directory of Open Access Journals (Sweden)

SITI F. M. LIAS

2016-05-01

Full Text Available Urban informal spaces in the form of back lane tend to promote socio-spatial integration between neighbourhood communities. The Back Lane Planning Design Guidelines issued in 2014 by Town and Country Planning Department of Malaysia identified back lane as such a place to encourage communal lifestyle whereas an area of owns residents privacy. In reality, back lane portrays as the wasted unfavourable paths thus several social concerns of safety, security, health issues as well as invading privacy and sense of deficiency community bonding issues arise. This study quantitatively analyses dwellers perception focusing to level of visual privacy and level of spiritual neighbourhood interaction towards effectiveness of newly landscape back lane (LBL in contemporary urban dwellings. Comparison of socio-spatial integration between two types of back lane design in grid-linear housing scheme ; the pleasing greenery landscape back lane (LBL and the plain empty bare paved back lane (PBL in residential area of Kota Seriemas, Nilai, Negeri Sembilan . Structured questionnaire distributed to 115 respondents to assess on privacy and comfort level, neighbourhood activities and communal lifestyle, back -lane usage, resident’s perception and expectation.The study proved the landscape design back lane (LBL is ensuring own right privacy lacking in promoting community interaction among the residents due to contemporary urban lifestyles.

Silicon Processors Using Organically Reconfigurable Techniques (SPORT)

Science.gov (United States)

2014-05-19

AFRL-OSR-VA-TR-2014-0132 SILICON PROCESSORS USING ORGANICALLY RECONFIGURABLE TECHNIQUES ( SPORT ) Dennis Prather UNIVERSITY OF DELAWARE Final Report 05...5a. CONTRACT NUMBER Silicon Processes for Organically Reconfigurable Techniques ( SPORT ) 5b. GRANT NUMBER FA9550-10-1-0363 5c...Contract: Silicon Processes for Organically Reconfigurable Techniques ( SPORT ) Contract #: FA9550-10-1-0363 Reporting Period: 1 July 2010 – 31 December

Operating System for Runtime Reconfigurable Multiprocessor Systems

Directory of Open Access Journals (Sweden)

Diana Göhringer

2011-01-01

Full Text Available Operating systems traditionally handle the task scheduling of one or more application instances on processor-like hardware architectures. RAMPSoC, a novel runtime adaptive multiprocessor System-on-Chip, exploits the dynamic reconfiguration on FPGAs to generate, start and terminate hardware and software tasks. The hardware tasks have to be transferred to the reconfigurable hardware via a configuration access port. The software tasks can be loaded into the local memory of the respective IP core either via the configuration access port or via the on-chip communication infrastructure (e.g. a Network-on-Chip. Recent-series of Xilinx FPGAs, such as Virtex-5, provide two Internal Configuration Access Ports, which cannot be accessed simultaneously. To prevent conflicts, the access to these ports as well as the hardware resource management needs to be controlled, e.g. by a special-purpose operating system running on an embedded processor. For that purpose and to handle the relations between temporally and spatially scheduled operations, the novel approach of an operating system is of high importance. This special purpose operating system, called CAP-OS (Configuration Access Port-Operating System, which will be presented in this paper, supports the clients using the configuration port with the services of priority-based access scheduling, hardware task mapping and resource management.

A reconfigurable hybrid supervisory system for process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1994-01-01

This paper presents a reconfigurable approach to decision and control systems for complex dynamic processes. The proposed supervisory control system is a reconfigurable hybrid architecture structured into three functional levels of hierarchy, namely, execution, supervision, and coordination. While the bottom execution level is constituted by either reconfigurable continuously varying or discrete event systems, the top two levels are necessarily governed by reconfigurable sets of discrete event decision and control systems. Based on the process status, the set of active control and supervisory algorithm is chosen. The reconfigurable hybrid system is briefly described along with a discussion on its implementation at the Experimental Breeder Reactor II of Argonne National Laboratory. A process control application of this hybrid system is presented and evaluated in an in-plant experiment

A reconfigurable hybrid supervisory system for process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1994-01-01

This paper presents a reconfigurable approach to decision and control systems for complex dynamic processes. The proposed supervisory control system is a reconfigurable hybrid architecture structured into three functional levels of hierarchy, namely, execution, supervision, and coordination. While, the bottom execution level is constituted by either reconfigurable continuously varying or discrete event systems, the top two levels are necessarily governed by reconfigurable sets of discrete event decision and control systems. Based on the process status, the set of active control and supervisory algorithm is chosen. The reconfigurable hybrid system is briefly described along with a discussion on its implementation at the Experimental Breeder Reactor 2 of Argonne National Laboratory. A process control application of this hybrid system is presented and evaluated in an in-plant experiment

Reconfiguring Urban Sustainability Transitions, Analysing Multiplicity

Directory of Open Access Journals (Sweden)

Mike Hodson

2017-02-01

Full Text Available Cities, and the networked infrastructures that sustain urban life, are seen as crucial sites for creating more sustainable futures. Yet, although there are many plans, the realisation of sustainable urban infrastructures on the ground is uneven. To develop better ways of understanding why this is the case, the paper makes a conceptual contribution by engaging with current understanding of urban sustainability transitions, using urban sustainable mobility as a reference point. It extends these insights to argue that urban transitions are not about technological or social innovation per se, but about how multiple innovations are experimented with, combined and reconfigured in existing urban contexts and how such processes are governed. There are potentially many ways in which urban sustainable mobility can be reconfigured contextually. Innovation is in the particular form of reconfiguration rather than individual technologies. To make analytical sense of this multiplicity, a preliminary framework is developed that offers the potential to think about urban transitions as contextual and reconfigurational. We argue that there is a need to embrace multiplicity and to understand its relationships to forms of reconfiguration, through empirical exploration and further theoretical and conceptual development. The preliminary framework is a contribution to doing so and we set out future directions for research.

A spatial socio-ecosystem approach to analyse human-environment interactions on climate change adaptation for water resources management

Science.gov (United States)

Giupponi, Carlo; Mojtahed, Vahid

2017-04-01

Global climate and socio-economic drivers determine the future patterns of the allocation and the trade of resources and commodities in all markets. The agricultural sector is an emblematic case in which natural (e.g. climate), social (e.g. demography) and economic (e.g. the market) drivers of change interact, determining the evolution of social and ecological systems (or simply socio-ecosystems; SES) over time. In order to analyse the dynamics and possible future evolutions of SES, the combination of local complex systems and global drivers and trends require the development of multiscale approaches. At global level, climatic general circulation models (CGM) and computable general equilibrium or partial equilibrium models have been used for many years to explore the effects of global trends and generate future climate and socio-economic scenarios. Al local level, the inherent complexity of SESs and their spatial and temporal variabilities require different modelling approaches of physical/environmental sub-systems (e.g. field scale crop modelling, GIS-based models, etc.) and of human agency decision makers (e.g. agent based models). Global and local models have different assumption, limitations, constrains, etc., but in some cases integration is possible and several attempts are in progress to couple different models within the so-called Integrated Assessment Models. This work explores an innovative proposal to integrate the global and local approaches, where agent-based models (ABM) are used to simulate spatial (i.e. grid-based) and temporal dynamics of land and water resource use spatial and temporal dynamics, under the effect of global drivers. We focus in particular on how global change may affect land-use allocation at the local to regional level, under the influence of limited natural resources, land and water in particular. We specifically explore how constrains and competition for natural resources may induce non-linearities and discontinuities in socio

Distribution grid reconfiguration reduces power losses and helps integrate renewables

International Nuclear Information System (INIS)

Lueken, Colleen; Carvalho, Pedro M.S.; Apt, Jay

2012-01-01

A reconfigurable network can change its topology by opening and closing switches on power lines. We use real wind, solar, load, and cost data and a model of a reconfigurable distribution grid to show that reconfiguration allows a grid operator to reduce operational losses as well as to accept more intermittent renewable generation than a static configuration can. Net present value analysis of automated switch technology shows that the return on investment is negative for this test network when considering only loss reduction, but that the investment is attractive under certain conditions when reconfiguration is used to minimize curtailment. - Highlights: ► Reconfiguration may reduce losses in grids with solar or wind distributed generation. ► Reconfigurable networks can accept more solar or wind DG than static ones. ► Using reconfiguration for loss reduction would not create a positive ROI. ► Using reconfiguration to reduce curtailment usually would create a positive ROI.

From stretchable to reconfigurable inorganic electronics

KAUST Repository

Nassar, Joanna M.

2016-05-06

Today’s state-of-the-art electronics are high performing, energy efficient, multi-functional and cost effective. However, they are also typically rigid and brittle. With the emergence of the Internet of Everything, electronic applications are expanding into previously unexplored areas, like healthcare, smart wearable artifacts, and robotics. One major challenge is the physical asymmetry of target application surfaces, which often cause mechanical stretching, contracting, twisting and other deformations to the application. In this review paper, we explore materials, processes, mechanics and devices that enable physically stretchable and reconfigurable electronics. While the concept of stretchable electronics is commonly used in practice, the notion of physically reconfigurable electronics is still in its infancy. Because organic materials are commonly naturally stretchable and physically deformable, we predominantly focus on electronics made from inorganic materials that have the capacity for physical stretching and reconfiguration while retaining their intended attributes. We emphasize how applications of electronics dictate theory to integration strategy for stretchable and reconfigurable inorganic electronics.

Multimode Communication Protocols Enabling Reconfigurable Radios

Directory of Open Access Journals (Sweden)

Berlemann Lars

2005-01-01

Full Text Available This paper focuses on the realization and application of a generic protocol stack for reconfigurable wireless communication systems. This focus extends the field of software-defined radios which usually concentrates on the physical layer. The generic protocol stack comprises common protocol functionality and behavior which are extended through specific parts of the targeted radio access technology. This paper considers parameterizable modules of basic protocol functions residing in the data link layer of the ISO/OSI model. System-specific functionality of the protocol software is realized through adequate parameterization and composition of the generic modules. The generic protocol stack allows an efficient realization of reconfigurable protocol software and enables a completely reconfigurable wireless communication system. It is a first step from side-by-side realized, preinstalled modes in a terminal towards a dynamic reconfigurable anymode terminal. The presented modules of the generic protocol stack can also be regarded as a toolbox for the accelerated and cost-efficient development of future communication protocols.

Spatially Synchronous Extinction of Species under External Forcing

Science.gov (United States)

Amritkar, R. E.; Rangarajan, Govindan

2006-06-01

More than 99% of the species that ever existed on the surface of the Earth are now extinct and their extinction on a global scale has been a puzzle. One may think that a species under an external threat may survive in some isolated locations leading to the revival of the species. Using a general model we show that, under a common external forcing, the species with a quadratic saturation term first undergoes spatial synchronization and then extinction. The effect can be observed even when the external forcing acts only on some locations provided the dynamics contains a synchronizing term. Absence of the quadratic saturation term can help the species to avoid extinction.

Design, Modelling and Analysis of a Workflow Reconfiguration

DEFF Research Database (Denmark)

Mazzara, Manuel; Abouzaid, Faisal; Dragoni, Nicola

2011-01-01

This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design and to ve......This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design...

Reconfiguring trade mark law

DEFF Research Database (Denmark)

Elsmore, Matthew James

2013-01-01

-border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

Structure socio-spatiale des réseaux d'innovation en secteur manufacturier traditionnel d'une ville moyenne

OpenAIRE

Mario Carrier; Marius Thériault; Éric Véronneau

2012-01-01

This article analyses results of a survey among small and mid-size manufacturing enterprises, with low to medium added value production, located in the Quebec province in a mid-size city showing a strong economic progression during the last three decades. Based on the sociologic theory of embeddedness of economic activities within social structures, indicators are developed in order to describe the socio-spatial configuration of business networks related to enterprise?s innovation activities ...

Optimization of metallic microheaters for high-speed reconfigurable silicon photonics.

Science.gov (United States)

Atabaki, A H; Shah Hosseini, E; Eftekhar, A A; Yegnanarayanan, S; Adibi, A

2010-08-16

The strong thermooptic effect in silicon enables low-power and low-loss reconfiguration of large-scale silicon photonics. Thermal reconfiguration through the integration of metallic microheaters has been one of the more widely used reconfiguration techniques in silicon photonics. In this paper, structural and material optimizations are carried out through heat transport modeling to improve the reconfiguration speed of such devices, and the results are experimentally verified. Around 4 micros reconfiguration time are shown for the optimized structures. Moreover, sub-microsecond reconfiguration time is experimentally demonstrated through the pulsed excitation of the microheaters. The limitation of this pulsed excitation scheme is also discussed through an accurate system-level model developed for the microheater response.

Unified Singularity Modeling and Reconfiguration of 3rTPS Metamorphic Parallel Mechanisms with Parallel Constraint Screws

Directory of Open Access Journals (Sweden)

Yufeng Zhuang

2015-01-01

Full Text Available This paper presents a unified singularity modeling and reconfiguration analysis of variable topologies of a class of metamorphic parallel mechanisms with parallel constraint screws. The new parallel mechanisms consist of three reconfigurable rTPS limbs that have two working phases stemming from the reconfigurable Hooke (rT joint. While one phase has full mobility, the other supplies a constraint force to the platform. Based on these, the platform constraint screw systems show that the new metamorphic parallel mechanisms have four topologies by altering the limb phases with mobility change among 1R2T (one rotation with two translations, 2R2T, and 3R2T and mobility 6. Geometric conditions of the mechanism design are investigated with some special topologies illustrated considering the limb arrangement. Following this and the actuation scheme analysis, a unified Jacobian matrix is formed using screw theory to include the change between geometric constraints and actuation constraints in the topology reconfiguration. Various singular configurations are identified by analyzing screw dependency in the Jacobian matrix. The work in this paper provides basis for singularity-free workspace analysis and optimal design of the class of metamorphic parallel mechanisms with parallel constraint screws which shows simple geometric constraints with potential simple kinematics and dynamics properties.

Secure computing on reconfigurable systems

OpenAIRE

Fernandes Chaves, R.J.

2007-01-01

This thesis proposes a Secure Computing Module (SCM) for reconfigurable computing systems. SC provides a protected and reliable computational environment, where data security and protection against malicious attacks to the system is assured. SC is strongly based on encryption algorithms and on the attestation of the executed functions. The use of SC on reconfigurable devices has the advantage of being highly adaptable to the application and the user requirements, while providing high performa...

Moving forward socio-economically focused models of deforestation.

Science.gov (United States)

Dezécache, Camille; Salles, Jean-Michel; Vieilledent, Ghislain; Hérault, Bruno

2017-09-01

Whilst high-resolution spatial variables contribute to a good fit of spatially explicit deforestation models, socio-economic processes are often beyond the scope of these models. Such a low level of interest in the socio-economic dimension of deforestation limits the relevancy of these models for decision-making and may be the cause of their failure to accurately predict observed deforestation trends in the medium term. This study aims to propose a flexible methodology for taking into account multiple drivers of deforestation in tropical forested areas, where the intensity of deforestation is explicitly predicted based on socio-economic variables. By coupling a model of deforestation location based on spatial environmental variables with several sub-models of deforestation intensity based on socio-economic variables, we were able to create a map of predicted deforestation over the period 2001-2014 in French Guiana. This map was compared to a reference map for accuracy assessment, not only at the pixel scale but also over cells ranging from 1 to approximately 600 sq. km. Highly significant relationships were explicitly established between deforestation intensity and several socio-economic variables: population growth, the amount of agricultural subsidies, gold and wood production. Such a precise characterization of socio-economic processes allows to avoid overestimation biases in high deforestation areas, suggesting a better integration of socio-economic processes in the models. Whilst considering deforestation as a purely geographical process contributes to the creation of conservative models unable to effectively assess changes in the socio-economic and political contexts influencing deforestation trends, this explicit characterization of the socio-economic dimension of deforestation is critical for the creation of deforestation scenarios in REDD+ projects. © 2017 John Wiley & Sons Ltd.

Reconfiguring Maternity Care?

DEFF Research Database (Denmark)

Johannsen, Nis

This dissertation constitutes a reflection on two initiatives seeking to reconfigure maternity care. One initiative sought to digitalise maternity records and included a pilot run of an electronic maternity record in a Danish county. The other consisted of a collaboration between a maternity ward...... at a hospital and a group of researchers which included me. Both initiatives involved numerous seemingly different interests that were held together and related to reconfiguring maternity care. None of the initiatives can unequivocally be labelled a success, as neither managed to change maternity care, at least...... experimental designs are constructed. The consequences and the politics of the proposed changes are engaged with in laboratory manner through collaborative development of the designs and through exposing them to members of field of maternity care...

Design of reconfigurable antennas using graph models

CERN Document Server

Costantine, Joseph; Christodoulou, Christos G; Christodoulou, Christos G

2013-01-01

This lecture discusses the use of graph models to represent reconfigurable antennas. The rise of antennas that adapt to their environment and change their operation based on the user's request hasn't been met with clear design guidelines. There is a need to propose some rules for the optimization of any reconfigurable antenna design and performance. Since reconfigurable antennas are seen as a collection of self-organizing parts, graph models can be introduced to relate each possible topology to a corresponding electromagnetic performance in terms of achieving a characteristic frequency of oper

Reconfigurable radio systems network architectures and standards

CERN Document Server

Iacobucci, Maria Stella

2013-01-01

This timely book provides a standards-based view of the development, evolution, techniques and potential future scenarios for the deployment of reconfigurable radio systems.  After an introduction to radiomobile and radio systems deployed in the access network, the book describes cognitive radio concepts and capabilities, which are the basis for reconfigurable radio systems.  The self-organizing network features introduced in 3GPP standards are discussed and IEEE 802.22, the first standard based on cognitive radio, is described. Then the ETSI reconfigurable radio systems functional ar

Graphene-based Yagi-Uda antenna with reconfigurable radiation patterns

Energy Technology Data Exchange (ETDEWEB)

Wu, Yongle, E-mail: wuyongle138@gmail.com; Qu, Meijun; Jiao, Lingxiao; Liu, Yuanan [School of Electronic Engineering, Beijing Key Laboratory of Work Safety Intelligent Monitoring, Beijing University of Posts and Telecommunications, P. O. Box. 282, Beijing, 100876 (China); Ghassemlooy, Zabih [Optical Communications Research Group, NCRLab, Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne, NE1 8ST (United Kingdom)

2016-06-15

This paper presents a radiation pattern reconfigurable Yagi-Uda antenna based on graphene operating at terahertz frequencies. The antenna can be reconfigured to change the main beam pattern into two or four different radiation directions. The proposed antenna consists of a driven dipole radiation conductor, parasitic strips and embedded graphene. The hybrid graphene-metal implementation enables the antenna to have dynamic surface conductivity, which can be tuned by changing the chemical potentials. Therefore, the main beam direction, the resonance frequency, and the front-to-back ratio of the proposed antenna can be controlled by tuning the chemical potentials of the graphene embedded in different positions. The proposed two-beam reconfigurable Yagi-Uda antenna can achieve excellent unidirectional symmetrical radiation pattern with the front-to-back ratio of 11.9 dB and the10-dB impedance bandwidth of 15%. The different radiation directivity of the two-beam reconfigurable antenna can be achieved by controlling the chemical potentials of the graphene embedded in the parasitic stubs. The achievable peak gain of the proposed two-beam reconfigurable antenna is about 7.8 dB. Furthermore, we propose a four-beam reconfigurable Yagi-Uda antenna, which has stable reflection-coefficient performance although four main beams in reconfigurable cases point to four totally different directions. The corresponding peak gain, front-to-back ratio, and 10-dB impedance bandwidth of the four-beam reconfigurable antenna are about 6.4 dB, 12 dB, and 10%, respectively. Therefore, this novel design method of reconfigurable antennas is extremely promising for beam-scanning in terahertz and mid-infrared plasmonic devices and systems.

Reconfigurable fault tolerant avionics system

Science.gov (United States)

Ibrahim, M. M.; Asami, K.; Cho, Mengu

This paper presents the design of a reconfigurable avionics system based on modern Static Random Access Memory (SRAM)-based Field Programmable Gate Array (FPGA) to be used in future generations of nano satellites. A major concern in satellite systems and especially nano satellites is to build robust systems with low-power consumption profiles. The system is designed to be flexible by providing the capability of reconfiguring itself based on its orbital position. As Single Event Upsets (SEU) do not have the same severity and intensity in all orbital locations, having the maximum at the South Atlantic Anomaly (SAA) and the polar cusps, the system does not have to be fully protected all the time in its orbit. An acceptable level of protection against high-energy cosmic rays and charged particles roaming in space is provided within the majority of the orbit through software fault tolerance. Check pointing and roll back, besides control flow assertions, is used for that level of protection. In the minority part of the orbit where severe SEUs are expected to exist, a reconfiguration for the system FPGA is initiated where the processor systems are triplicated and protection through Triple Modular Redundancy (TMR) with feedback is provided. This technique of reconfiguring the system as per the level of the threat expected from SEU-induced faults helps in reducing the average dynamic power consumption of the system to one-third of its maximum. This technique can be viewed as a smart protection through system reconfiguration. The system is built on the commercial version of the (XC5VLX50) Xilinx Virtex5 FPGA on bulk silicon with 324 IO. Simulations of orbit SEU rates were carried out using the SPENVIS web-based software package.

Go reconfigure: how fish change shape as they swim and evolve.

Science.gov (United States)

Long, John H; Porter, Marianne E; Root, Robert G; Liew, Chun Wai

2010-12-01

The bodies of fish change shape over propulsive, behavioral, developmental, and evolutionary time scales, a general phenomenon that we call "reconfiguration". Undulatory, postural, and form-reconfiguration can be distinguished, studied independently, and examined in terms of mechanical interactions and evolutionary importance. Using a combination of live, swimming fishes and digital robotic fish that are autonomous and self-propelled, we examined the functional relation between undulatory and postural reconfiguration in forward swimming, backward swimming, and yaw turning. To probe how postural and form reconfiguration interact, the yaw turning of leopard sharks was examined using morphometric and kinematic analyses. To test how undulatory reconfiguration might evolve, the digital robotic fish were subjected to selection for enhanced performance in a simulated ecology in which each individual had to detect and move towards a food source. In addition to the general issue of reconfiguration, these investigations are united by the fact that the dynamics of undulatory and postural reconfigurations are predicted to be determined, in part, by the structural stiffness of the fish's body. Our method defines undulatory reconfiguration as the combined, point-by-point periodic motion of the body, leaving postural reconfiguration as the combined deviations from undulatory reconfiguration. While undulatory reconfiguration appears to be the sole or primary propulsive driver, postural reconfiguration may contribute to propulsion in hagfish and it is correlated with differences in forward, and backward, swimming in lamprey. Form reconfigures over developmental time in leopard sharks in a manner that is consistent with an allometric scaling theory in which structural stiffness of the body is held constant. However, correlation of a form proxy for structural stiffness of the body suggests that body stiffness may scale in order to limit maximum postural reconfiguration during routine

Portable reconfigurable line sensor (PRLS) and technology transfer

International Nuclear Information System (INIS)

MacKenzie, D.P.; Buckle, T.H.; Blattman, D.A.

1993-01-01

The Portable Reconfigurable Line Sensor (PRLS) is a bistatic, pulsed-Doppler, microwave intrusion detection system developed at Sandia National Laboratories for the US Air Force. The PRLS is rapidly and easily deployed, and can detect intruders ranging from a slow creeping intruder to a high speed vehicle. The system has a sharply defined detection zone and will not falsely alarm on nearby traffic. Unlike most microwave sensors, the PRLS requires no alignment or calibration. Its portability, battery operation, ease of setup, and RF alarm reporting capability make it an excellent choice for perimeter, portal, and gap-filler applications in the important new field of rapidly-deployable sensor systems. In October 1992, the US Air Force and Racon, Inc., entered into a Cooperative Research and Development Agreement (CRADA) to commercialize the PRLS, jointly sharing government and industry resources. The Air Force brings the user's perspective and requirements to the cooperative effort. Sandia, serving as the technical arm of the Air Force, adds the actual PRLS technology to the joint effort, and provides security systems and radar development expertise. Racon puts the Air Force requirements and Sandia technology together into a commercial product, making the system meet important commercial manufacturing constraints. The result is a true ''win-win'' situation, with reduced government investment during the commercial development of the PRLS, and industry access to technology not otherwise available

Moving forward socio-economically focused models of deforestation

OpenAIRE

DEZÉCACHE CAMILLE; SALLES JEAN-MICHEL; VIEILLEDENT GHISLAIN; HÉRAULT BRUNO

2017-01-01

While high resolution spatial variables contribute to a good fit of spatially-explicit deforestation models, socio-economic processes are often beyond the scope of these models. Such a low level of interest in the socio-economic dimension of deforestation limits the relevancy of these models for decision making and may be the cause of their failure to accurately predict observed deforestation trends in the medium term. This study aims to propose a flexible methodology for taking into account ...

Reconfigurable optical manipulation by phase change material waveguides.

Science.gov (United States)

Zhang, Tianhang; Mei, Shengtao; Wang, Qian; Liu, Hong; Lim, Chwee Teck; Teng, Jinghua

2017-05-25

Optical manipulation by dielectric waveguides enables the transportation of particles and biomolecules beyond diffraction limits. However, traditional dielectric waveguides could only transport objects in the forward direction which does not fulfill the requirements of the next generation lab-on-chip system where the integrated manipulation system should be much more flexible and multifunctional. In this work, bidirectional transportation of objects on the nanoscale is demonstrated on a rectangular waveguide made of the phase change material Ge 2 Sb 2 Te 5 (GST) by numerical simulations. Either continuous pushing forces or pulling forces are generated on the trapped particles when the GST is in the amorphous or crystalline phase. With the technique of a femtosecond laser induced phase transition on the GST, we further proposed a reconfigurable optical trap array on the same waveguide. This work demonstrates GST waveguide's potential of achieving multifunctional manipulation of multiple objects on the nanoscale with plausible optical setups.

MT-ADRES: Multithreading on Coarse-Grained Reconfigurable Architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2007-01-01

The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl’s law, this paper proposes to extend ADRES to MT-ADRES (Multi-Threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned in multiple...

Think big, start small : restricted room for manoeuvre by practitioners in socio-spatial planning of peripheral regions in Third World Countries

NARCIS (Netherlands)

Ham, van den A.; Veenstra, J.

2000-01-01

In a first part of this study van den Ham reacts to the increased free-market thinking and makes in chapter 1 a plea for continued efforts in active, public socio-spatial development policies in order to contribute to sustainable poverty alleviation in remote areas. This policy should aim

Reconfigurable Optical Interconnections Via Dynamic Computer-Generated Holograms

Science.gov (United States)

Liu, Hua-Kuang (Inventor); Zhou, Shao-Min (Inventor)

1996-01-01

A system is presented for optically providing one-to-many irregular interconnections, and strength-adjustable many-to-many irregular interconnections which may be provided with strengths (weights) w(sub ij) using multiple laser beams which address multiple holograms and means for combining the beams modified by the holograms to form multiple interconnections, such as a cross-bar switching network. The optical means for interconnection is based on entering a series of complex computer-generated holograms on an electrically addressed spatial light modulator for real-time reconfigurations, thus providing flexibility for interconnection networks for large-scale practical use. By employing multiple sources and holograms, the number of interconnection patterns achieved is increased greatly.

Modular reconfigurable machine tools: design, control and evaluation

CSIR Research Space (South Africa)

Padayachee, J

2009-11-01

Full Text Available The reconfigurable manufacturing system (RMS) paradigm encapsulates methodologies that enable manufacturing systems to cope effectively with market and product changes. This research presents the design and evaluation of modular reconfigurable...

3rd IEEE/IFToMM International Conference on Reconfigurable Mechanisms and Robots

CERN Document Server

Kong, Xianwen; Dai, Jian; ReMAR 2015; Advances in Reconfigurable Mechanisms and Robots II

2016-01-01

This book presents the most recent advances in the research and applications of reconfigurable mechanisms and robots. It collects 93 independently reviewed papers presented at the Third ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2015) held in Beijing, China, 20-22 July 2015. The conference papers are organized into seven parts to cover the reconfiguration theory, topology, kinematics and design of reconfigurable mechanisms including reconfigurable parallel mechanisms. The most recent results on reconfigurable robots are presented including their analysis, design, simulation and control. Bio-inspired mechanisms are also explored in the challenging fields of rehabilitation and minimally invasive surgery. This book further addresses deployable mechanisms and origami-inspired mechanisms and showcases a wide range of successful applications of reconfigurable mechanisms and robots. Advances in Reconfigurable Mechanisms and Robots II should be of interest for researchers, eng...

A reconfigurable NAND/NOR genetic logic gate.

Science.gov (United States)

Goñi-Moreno, Angel; Amos, Martyn

2012-09-18

Engineering genetic Boolean logic circuits is a major research theme of synthetic biology. By altering or introducing connections between genetic components, novel regulatory networks are built in order to mimic the behaviour of electronic devices such as logic gates. While electronics is a highly standardized science, genetic logic is still in its infancy, with few agreed standards. In this paper we focus on the interpretation of logical values in terms of molecular concentrations. We describe the results of computational investigations of a novel circuit that is able to trigger specific differential responses depending on the input standard used. The circuit can therefore be dynamically reconfigured (without modification) to serve as both a NAND/NOR logic gate. This multi-functional behaviour is achieved by a) varying the meanings of inputs, and b) using branch predictions (as in computer science) to display a constrained output. A thorough computational study is performed, which provides valuable insights for the future laboratory validation. The simulations focus on both single-cell and population behaviours. The latter give particular insights into the spatial behaviour of our engineered cells on a surface with a non-homogeneous distribution of inputs. We present a dynamically-reconfigurable NAND/NOR genetic logic circuit that can be switched between modes of operation via a simple shift in input signal concentration. The circuit addresses important issues in genetic logic that will have significance for more complex synthetic biology applications.

Improving Reliability, Security, and Efficiency of Reconfigurable Hardware Systems (Habilitation)

NARCIS (Netherlands)

Ziener, Daniel

2017-01-01

In this treatise,  my research on methods to improve efficiency, reliability, and security of reconfigurable hardware systems, i.e., FPGAs, through partial dynamic reconfiguration is outlined. The efficiency of reconfigurable systems can be improved by loading optimized data paths on-the-fly on an

Distinguishing Reconfiguration and Compound-cue Retrieval in Task Switching

Directory of Open Access Journals (Sweden)

Gordon D Logan

2010-10-01

Full Text Available Many researchers claim that task switching requires reconfiguration of the cognitive system. Others claim that task switching involves cue-based memory retrieval processes and not reconfiguration. We evaluate these competing claims by developing both reconfiguration and cue-based memory models in a common theoretical framework and by fitting the models to' target functions', which show how performance on individual target stimuli varies depending on the task subjects perform on the targets. Our analyses show that the process of compound-cue retrieval – using the task cue and the target as joint retrieval cues to select a response from memory – is sufficient to explain target functions for parity and magnitude judgments of digits and that reconfiguration does not seem to add anything to the explanation. We address the generality of this conclusion and speculate about the conditions under which reconfiguration may be necessary for task switching.

Design Tools for Reconfigurable Hardware in Orbit (RHinO)

Science.gov (United States)

French, Mathew; Graham, Paul; Wirthlin, Michael; Larchev, Gregory; Bellows, Peter; Schott, Brian

2004-01-01

The Reconfigurable Hardware in Orbit (RHinO) project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. These tools leverage an established FPGA design environment and focus primarily on space effects mitigation and power optimization. The project is creating software to automatically test and evaluate the single-event-upsets (SEUs) sensitivities of an FPGA design and insert mitigation techniques. Extensions into the tool suite will also allow evolvable algorithm techniques to reconfigure around single-event-latchup (SEL) events. In the power domain, tools are being created for dynamic power visualiization and optimization. Thus, this technology seeks to enable the use of Reconfigurable Hardware in Orbit, via an integrated design tool-suite aiming to reduce risk, cost, and design time of multimission reconfigurable space processors using SRAM-based FPGAs.

Reconfigurable layout problem

NARCIS (Netherlands)

Meng, G.; Heragu, S.S.; Heragu, S.S.; Zijm, Willem H.M.

2004-01-01

This paper addresses the reconfigurable layout problem, which differs from traditional, robust and dynamic layout problems mainly in two aspects: first, it assumes that production data are available only for the current and upcoming production period. Second, it considers queuing performance

Active sensing and its application to sensor node reconfiguration.

Science.gov (United States)

Lee, Sooyong

2014-10-08

This paper presents a perturbation/correlation-based active sensing method and its application to sensor node configuration for environment monitoring. Sensor networks are widely used as data measurement tools, especially in dangerous environments. For large scale environment monitoring, a large number of nodes is required. For optimal measurements, the placement of nodes is very important. Nonlinear spring force-based configuration is introduced. Perturbation/correlation-based estimation of the gradient is developed and it is much more robust because it does not require any differentiation. An algorithm for tuning the stiffness using the estimated gradient for node reconfiguration is presented. The performance of the proposed algorithm is discussed with simulation results.

Object-oriented image analysis and change detection of land-use on Tenerife related to socio-economic conditions

Science.gov (United States)

Naumann, Simone; Siegmund, Alexander

2004-10-01

The island Tenerife is characterized by an increasing tourism, which causes an enormous change of the socio-economic situation and a rural exodus. This development leads - beside for example sociocultural issues - to fallow land, decreasing settlements, land wasting etc., as well as to an economic and ecological problem. This causes to a growing interest in geoecological aspects and to an increasing demand for an adequate monitoring database. In order to study the change of land use and land cover, the technology of remote sensing (LANDSAT 3 MSS and 7 ETM+, orthophotos) and geographical information systems were used to analyze the spatial pattern and its spatial temporal changes of land use from end of the 70s to the present in different scales. Because of the heterogeneous landscape and the unsatisfactory experience with pixel-based classification of the same area, object-oriented image analysis techniques have been applied to classify the remote sensed data. A post-classification application was implemented to detect spatial and categorical land use and land cover changes, which have been clipped with the socio-economic data within GIS to derive the driving forces of the changes and their variability in time and space.

L'environnement socio-spatial comme facteur d'émergence des maladies infectieuses

Directory of Open Access Journals (Sweden)

Jean-Sébastien Dehecq

2009-07-01

Full Text Available Parmi le grand nombre possible d’aléas dans le sud-ouest de l'océan Indien (cyclones, pluies torrentielles, volcanisme, tsunami, maladies infectieuses … certains sont plus dévastateurs et présents que d'autres. L'épidémie de chikungunya, qui s'est déroulée de 2004 à 2006, est sans doute l'événement majeur de santé publique qui a marqué les hommes, les sociétés et les esprits aussi. Cette épidémie a touché les Etats et territoires de la région avec des prévalences de 25 à 60 %. Pour essayer de caractériser les contours de la vulnérabilité et déterminer des effets de contexte nous avons mené une analyse des niveaux de développement humain, social et sanitaire des pays concernés. S'il est établi que les facteurs d'émergence à l'échelle régionale sont très largement liés à des variables socio-spatiales néanmoins, à aléa égal le risque n’est pas proportionnellement plus important dans les pays réputés les plus vulnérables. A l'échelle de La Réunion, une analyse des données de l'environnement socio-spatial et épidémiologique, avec près de 3 000 cas géoréférencés durant la première phase de l'épidémie, permet d'établir les principaux quartiers à risques de l'île.Among the large amount of likely hazards in the South West of the Indian Ocean region (hurricanes, torrential rains, tsunamis, infectious diseases …, some are more devastating and present than others. The Chikungunya epidemic that lasted from 2004 to 2006, as probably the major public health event, has left a strong impact on men, societies, and people’s mind. This epidemic hit the states and territories in the region with 25% up to 60% prevalences. In an attempt to characterize the outlines of vulnerability and to determine contextual effects, we conducted an analysis of levels in human, social and health development in the involved countries. Although it has been established emergence factors on a regional scale are

An FPGA-based reconfigurable DDC algorithm

Science.gov (United States)

Juszczyk, B.; Kasprowicz, G.

2016-09-01

This paper describes implementation of reconfigurable digital down converter in an FPGA structure. System is designed to work with quadrature signals. One of the main criteria of the project was to provied wide range of reconfiguration in order to fulfill various application rage. Potential applications include: software defined radio receiver, passive noise radars and measurement data compression. This document contains general system overview, short description of hardware used in the project and gateware implementation.

Value Assessment of Distribution Network Reconfiguration: A Danish Case Study

DEFF Research Database (Denmark)

Vaskantiras, Georgios; You, Shi

2016-01-01

. This paper presents a case study-based analysis to explore the potential value of reconfiguration in detail. The study is performed using a 10kV distribution grid of Denmark, while reconfiguration is applied to minimize the energy losses under both normal and post-fault conditions. The results show......Distribution network reconfiguration is a mechanism that can improve the distribution system performance from multiple perspectives. In the context of smart grid wherein the degrees of automation and intelligence are high, the potential value of network reconfiguration can be significant...

The Role of Socio-technical Devices in Framing the Current Strategic Issues and Future States of the Service Market

DEFF Research Database (Denmark)

Tryggestad, Kjell

2004-01-01

The aim of this paper is to inquire into the role of socio-technical devices like value metrics and accounting in organizing the service market. The authors provide a case on how such devices participates in framing the market for transportation during the introduction of large-scale bridges....... In addition to the traditional role of accounting as a representation device, the authors also show how these devices participate in performing the service economy - undermining and redrawing organizational boundaries in unexpected ways. The presence of multiple connections with socio-technical devices...... are then brought into an explanation of the overflowing and reconfiguration of the transportation market....

Reconfigurable Mobile Multimedia

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Bos, M.; Havinga, Paul J.M.; Smit, Jaap

1999-01-01

This paper discusses reconfigurability issues in lowpower hand-held multimedia systems, with particular emphasis on energy conservation. We claim that a radical new approach has to be taken in order to fulfill the requirements - in terms of processing power and energy consumption - of future mobile

Russian Socio-Economic Geography: Status, Challenges, Perspectives

Directory of Open Access Journals (Sweden)

Martynov Vasilii

2015-06-01

Full Text Available The socio-economic geography studies the processes, characteristics and patterns of spatial development. In the recent decades, however, this area of scientific investigation has failed its promise, which happened for a number of external and internal reasons. The main external reason is the development of "consumer society", which does not require the search of new space and therefore ignores the "spatial" science, geography. Internal reason is the blurring of socio-economic geography along the variety of new lines of research. The discipline was, in many ways, redundant, and unselective in the application of theoretical and methodological tools liberally borrowed from other branches of both geography and economics. The only way this discipline can return to its former glory is by going all the way back to doing proper spatial research.

Reconfiguring The Supply Chain For Complex Engineered Products

DEFF Research Database (Denmark)

Wæhrens, Brian Vejrum; Asmussen, Jesper Normann

2016-01-01

of the SC, the product and market requirements. This paper seeks to investigate the factors which create a need for supply chain reconfiguration in the context of the Complex Product Systems, together with the enablers and barriers for successfully realizing supply chain improvements through reconfiguration....

MT-ADRES: multi-threading on coarse-grained reconfigurable architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2008-01-01

The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl's law, this article proposes to extend ADRES to MT-ADRES (multi-threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned...

A Socio-Ecological Approach for Identifying and Contextualising Spatial Ecosystem-Based Adaptation Priorities at the Sub-National Level.

Directory of Open Access Journals (Sweden)

Amanda Bourne

Full Text Available Climate change adds an additional layer of complexity to existing sustainable development and biodiversity conservation challenges. The impacts of global climate change are felt locally, and thus local governance structures will increasingly be responsible for preparedness and local responses. Ecosystem-based adaptation (EbA options are gaining prominence as relevant climate change solutions. Local government officials seldom have an appropriate understanding of the role of ecosystem functioning in sustainable development goals, or access to relevant climate information. Thus the use of ecosystems in helping people adapt to climate change is limited partially by the lack of information on where ecosystems have the highest potential to do so. To begin overcoming this barrier, Conservation South Africa in partnership with local government developed a socio-ecological approach for identifying spatial EbA priorities at the sub-national level. Using GIS-based multi-criteria analysis and vegetation distribution models, the authors have spatially integrated relevant ecological and social information at a scale appropriate to inform local level political, administrative, and operational decision makers. This is the first systematic approach of which we are aware that highlights spatial priority areas for EbA implementation. Nodes of socio-ecological vulnerability are identified, and the inclusion of areas that provide ecosystem services and ecological resilience to future climate change is innovative. The purpose of this paper is to present and demonstrate a methodology for combining complex information into user-friendly spatial products for local level decision making on EbA. The authors focus on illustrating the kinds of products that can be generated from combining information in the suggested ways, and do not discuss the nuance of climate models nor present specific technical details of the model outputs here. Two representative case studies from

A Socio-Ecological Approach for Identifying and Contextualising Spatial Ecosystem-Based Adaptation Priorities at the Sub-National Level

Science.gov (United States)

Bourne, Amanda; Holness, Stephen; Holden, Petra; Scorgie, Sarshen; Donatti, Camila I.; Midgley, Guy

2016-01-01

Climate change adds an additional layer of complexity to existing sustainable development and biodiversity conservation challenges. The impacts of global climate change are felt locally, and thus local governance structures will increasingly be responsible for preparedness and local responses. Ecosystem-based adaptation (EbA) options are gaining prominence as relevant climate change solutions. Local government officials seldom have an appropriate understanding of the role of ecosystem functioning in sustainable development goals, or access to relevant climate information. Thus the use of ecosystems in helping people adapt to climate change is limited partially by the lack of information on where ecosystems have the highest potential to do so. To begin overcoming this barrier, Conservation South Africa in partnership with local government developed a socio-ecological approach for identifying spatial EbA priorities at the sub-national level. Using GIS-based multi-criteria analysis and vegetation distribution models, the authors have spatially integrated relevant ecological and social information at a scale appropriate to inform local level political, administrative, and operational decision makers. This is the first systematic approach of which we are aware that highlights spatial priority areas for EbA implementation. Nodes of socio-ecological vulnerability are identified, and the inclusion of areas that provide ecosystem services and ecological resilience to future climate change is innovative. The purpose of this paper is to present and demonstrate a methodology for combining complex information into user-friendly spatial products for local level decision making on EbA. The authors focus on illustrating the kinds of products that can be generated from combining information in the suggested ways, and do not discuss the nuance of climate models nor present specific technical details of the model outputs here. Two representative case studies from rural South Africa

Operating System Concepts for Reconfigurable Computing: Review and Survey

OpenAIRE

Marcel Eckert; Dominik Meyer; Jan Haase; Bernd Klauer

2016-01-01

One of the key future challenges for reconfigurable computing is to enable higher design productivity and a more easy way to use reconfigurable computing systems for users that are unfamiliar with the underlying concepts. One way of doing this is to provide standardization and abstraction, usually supported and enforced by an operating system. This article gives historical review and a summary on ideas and key concepts to include reconfigurable computing aspects in operating systems. The arti...

Reconfigurability of behavioural specifications for manufacturing systems

Science.gov (United States)

Schmidt, Klaus Werner

2017-12-01

Reconfigurable manufacturing systems (RMS) support flexibility in the product variety and the configuration of the manufacturing system itself in order to enable quick adjustments to new products and production requirements. As a consequence, an essential feature of RMS is their ability to rapidly modify the control strategy during run-time. In this paper, the particular problem of changing the specified operation of a RMS, whose logical behaviour is modelled as a finite state automaton, is addressed. The notion of reconfigurability of specifications (RoS) is introduced and it is shown that the stated reconfiguration problem can be formulated as a controlled language convergence problem. In addition, algorithms for the verification of RoS and the construction of a reconfiguration supervisor are proposed. The supervisor is realised in a modular way which facilitates the extension by new configurations. Finally, it is shown that a supremal nonblocking and controllable strict subautomaton of the plant automaton that fulfils RoS exists in case RoS is violated for the plant automaton itself and an algorithm for the computation of this strict subautomaton is presented. The developed concepts and results are illustrated by a manufacturing cell example.

Design Flow Instantiation for Run-Time Reconfigurable Systems: A Case Study

Directory of Open Access Journals (Sweden)

Yang Qu

2007-12-01

Full Text Available Reconfigurable system is a promising alternative to deliver both flexibility and performance at the same time. New reconfigurable technologies and technology-dependent tools have been developed, but a complete overview of the whole design flow for run-time reconfigurable systems is missing. In this work, we present a design flow instantiation for such systems using a real-life application. The design flow is roughly divided into two parts: system level and implementation. At system level, our supports for hardware resource estimation and performance evaluation are applied. At implementation level, technology-dependent tools are used to realize the run-time reconfiguration. The design case is part of a WCDMA decoder on a commercially available reconfigurable platform. The results show that using run-time reconfiguration can save over 40% area when compared to a functionally equivalent fixed system and achieve 30 times speedup in processing time when compared to a functionally equivalent pure software design.

Operating System Concepts for Reconfigurable Computing: Review and Survey

Directory of Open Access Journals (Sweden)

Marcel Eckert

2016-01-01

Full Text Available One of the key future challenges for reconfigurable computing is to enable higher design productivity and a more easy way to use reconfigurable computing systems for users that are unfamiliar with the underlying concepts. One way of doing this is to provide standardization and abstraction, usually supported and enforced by an operating system. This article gives historical review and a summary on ideas and key concepts to include reconfigurable computing aspects in operating systems. The article also presents an overview on published and available operating systems targeting the area of reconfigurable computing. The purpose of this article is to identify and summarize common patterns among those systems that can be seen as de facto standard. Furthermore, open problems, not covered by these already available systems, are identified.

Hierarchically assembled DNA origami tubules with reconfigurable chirality

International Nuclear Information System (INIS)

Chen, Haorong; Cha, Tae-Gon; Pan, Jing; Choi, Jong Hyun

2013-01-01

The dynamic reconfiguration of a hierarchically assembled tubular structure is demonstrated using the DNA origami technique. Short cylindrical DNA origami monomers are synthesized and linked into elongated tubules, which can then be disassembled via toehold-mediated strand displacement. The disassembled subunits are subsequently linked into tubules of a different chirality. The reconfiguration is performed with the subunits carrying dumbbell hairpin DNA oligonucleotides or gold nanoparticles (AuNPs). The reconfiguration of higher order origami structures presented here is useful for constructing dynamic nanostructures that exceed the size limit of single DNA origami and may facilitate the study of molecular or particle interactions by tuning their relative distance and organization. (paper)

Pass-band reconfigurable spoof surface plasmon polaritons

Science.gov (United States)

Zhang, Hao Chi; He, Pei Hang; Gao, Xinxin; Tang, Wen Xuan; Cui, Tie Jun

2018-04-01

In this paper, we introduce a new scheme to construct the band-pass tunable filter based on the band-pass reconfigurable spoof surface plasmon polaritons (SPPs), whose cut-off frequencies at both sides of the passband can be tuned through changing the direct current (DC) bias of varactors. Compared to traditional technology (e.g. microstrip filters), the spoof SPP structure can provide more tight field confinement and more significant field enhancement, which is extremely valuable for many system applications. In order to achieve this scheme, we proposed a specially designed SPP filter integrated with varactors and DC bias feeding structure to support the spoof SPP passband reconfiguration. Furthermore, the full-wave simulated result verifies the outstanding performance on both efficiency and reconfiguration, which has the potential to be widely used in advanced intelligent systems.

Assessing patterns of spatial behavior in health studies: their socio-demographic determinants and associations with transportation modes (the RECORD Cohort Study).

Science.gov (United States)

Perchoux, Camille; Kestens, Yan; Thomas, Frédérique; Van Hulst, Andraea; Thierry, Benoit; Chaix, Basile

2014-10-01

Prior epidemiological studies have mainly focused on local residential neighborhoods to assess environmental exposures. However, individual spatial behavior may modify residential neighborhood influences, with weaker health effects expected for mobile populations. By examining individual patterns of daily mobility and associated socio-demographic profiles and transportation modes, this article seeks to develop innovative methods to account for daily mobility in health studies. We used data from the RECORD Cohort Study collected in 2011-2012 in the Paris metropolitan area, France. A sample of 2062 individuals was investigated. Participants' perceived residential neighborhood boundaries and regular activity locations were geocoded using the VERITAS application. Twenty-four indicators were created to qualify individual space-time patterns, using spatial analysis methods and a geographic information system. Three domains of indicators were considered: lifestyle indicators, indicators related to the geometry of the activity space, and indicators related to the importance of the residential neighborhood in the overall activity space. Principal component analysis was used to identify main dimensions of spatial behavior. Multilevel linear regression was used to determine which individual characteristics were associated with each spatial behavior dimension. The factor analysis generated five dimensions of spatial behavior: importance of the residential neighborhood in the activity space, volume of activities, and size, eccentricity, and specialization of the activity space. Age, socioeconomic status, and location of the household in the region were the main predictors of daily mobility patterns. Activity spaces of small sizes centered on the residential neighborhood and implying a large volume of activities were associated with walking and/or biking as a transportation mode. Examination of patterns of spatial behavior by individual socio-demographic characteristics and in

Short-Term Load Forecasting-Based Automatic Distribution Network Reconfiguration

Energy Technology Data Exchange (ETDEWEB)

Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-08-23

In a traditional dynamic network reconfiguration study, the optimal topology is determined at every scheduled time point by using the real load data measured at that time. The development of the load forecasting technique can provide an accurate prediction of the load power that will happen in a future time and provide more information about load changes. With the inclusion of load forecasting, the optimal topology can be determined based on the predicted load conditions during a longer time period instead of using a snapshot of the load at the time when the reconfiguration happens; thus, the distribution system operator can use this information to better operate the system reconfiguration and achieve optimal solutions. This paper proposes a short-term load forecasting approach to automatically reconfigure distribution systems in a dynamic and pre-event manner. Specifically, a short-term and high-resolution distribution system load forecasting approach is proposed with a forecaster based on support vector regression and parallel parameters optimization. The network reconfiguration problem is solved by using the forecasted load continuously to determine the optimal network topology with the minimum amount of loss at the future time. The simulation results validate and evaluate the proposed approach.

Reconfigurable Sensor Monitoring System

Science.gov (United States)

Alhorn, Dean C. (Inventor); Dutton, Kenneth R. (Inventor); Howard, David E. (Inventor); Smith, Dennis A. (Inventor)

2017-01-01

A reconfigurable sensor monitoring system includes software tunable filters, each of which is programmable to condition one type of analog signal. A processor coupled to the software tunable filters receives each type of analog signal so-conditioned.

Dynamic Reconfiguration in Real-Time Systems Energy, Performance, and Thermal Perspectives

CERN Document Server

Wang, Weixun; Ranka, Sanjay

2013-01-01

Given the widespread use of real-time multitasking systems, there are tremendous optimization opportunities if reconfigurable computing can be effectively incorporated while maintaining performance and other design constraints of typical applications. The focus of this book is to describe the dynamic reconfiguration techniques that can be safely used in real-time systems. This book provides comprehensive approaches by considering synergistic effects of computation, communication as well as storage together to significantly improve overall performance, power, energy and temperature.  Provides a comprehensive introduction to optimization and dynamic reconfiguration techniques in real-time embedded systems; Covers state-of-the-art techniques and ongoing research in reconfigurable architectures; Focuses on algorithms tuned for dynamic reconfiguration techniques in real-time systems;  Provides reference for anyone designing low-power systems, energy-/temperature-constrained devices, and power-performance efficie...

Glenn Reconfigurable User-interface and Virtual reality Exploration (GURVE) Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The GRUVE (Glenn Reconfigurable User-interface and Virtual reality Exploration) Lab is a reconfigurable, large screen display facility at Nasa Glenn Research Center....

Reconfigurable Model Execution in the OpenMDAO Framework

Science.gov (United States)

Hwang, John T.

2017-01-01

NASA's OpenMDAO framework facilitates constructing complex models and computing their derivatives for multidisciplinary design optimization. Decomposing a model into components that follow a prescribed interface enables OpenMDAO to assemble multidisciplinary derivatives from the component derivatives using what amounts to the adjoint method, direct method, chain rule, global sensitivity equations, or any combination thereof, using the MAUD architecture. OpenMDAO also handles the distribution of processors among the disciplines by hierarchically grouping the components, and it automates the data transfer between components that are on different processors. These features have made OpenMDAO useful for applications in aircraft design, satellite design, wind turbine design, and aircraft engine design, among others. This paper presents new algorithms for OpenMDAO that enable reconfigurable model execution. This concept refers to dynamically changing, during execution, one or more of: the variable sizes, solution algorithm, parallel load balancing, or set of variables-i.e., adding and removing components, perhaps to switch to a higher-fidelity sub-model. Any component can reconfigure at any point, even when running in parallel with other components, and the reconfiguration algorithm presented here performs the synchronized updates to all other components that are affected. A reconfigurable software framework for multidisciplinary design optimization enables new adaptive solvers, adaptive parallelization, and new applications such as gradient-based optimization with overset flow solvers and adaptive mesh refinement. Benchmarking results demonstrate the time savings for reconfiguration compared to setting up the model again from scratch, which can be significant in large-scale problems. Additionally, the new reconfigurability feature is applied to a mission profile optimization problem for commercial aircraft where both the parametrization of the mission profile and the

Loop overhead reduction techniques for coarse grained reconfigurable architectures

NARCIS (Netherlands)

Vadivel, K.; Wijtvliet, M.; Jordans, R.; Corporaal, H.

2017-01-01

Due to their flexibility and high performance, Coarse Grained Reconfigurable Array (CGRA) are a topic of increasing research interest. However, CGRAs also have the potential to achieve very high energy efficiency in comparison to other reconfigurable architectures when hardware optimizations are

Infrastructure sufficiency in meeting water demand under climate-induced socio-hydrological transition in the urbanizing Capibaribe River basin - Brazil

Science.gov (United States)

Ribeiro Neto, A.; Scott, C. A.; Lima, E. A.; Montenegro, S. M. G. L.; Cirilo, J. A.

2014-09-01

Water availability for a range of human uses will increasingly be affected by climate change, especially in the arid and semiarid tropics. The main objective of this study is to evaluate the infrastructure sufficiency in meeting water demand under climate-induced socio-hydrological transition in the Capibaribe River basin (CRB). The basin has experienced spatial and sectoral (agriculture-to-urban) reconfiguration of water demands. Human settlements that were once dispersed, relying on intermittent sources of surface water, are now larger and more spatially concentrated, which increases water-scarcity effects. Based on the application of linked hydrologic and water-resources models using precipitation and temperature projections of the IPCC SRES (Special Report: Emissions Scenarios) A1B scenario, a reduction in rainfall of 26.0% translated to streamflow reduction of 60.0%. We used simulations from four members of the HadCM3 (UK Met Office Hadley Centre) perturbed physics ensemble, in which a single model structure is used and perturbations are introduced to the physical parameterization schemes in the model (Chou et al., 2012). We considered that the change of the water availability in the basin in the future scenarios must drive the water management and the development of adaptation strategies that will manage the water demand. Several adaptive responses are considered, including water-loss reductions, wastewater collection and reuse, and rainwater collection cisterns, which together have potential to reduce future water demand by 23.0%. This study demonstrates the vulnerabilities of the infrastructure system during socio-hydrological transition in response to hydroclimatic and demand variabilities in the CRB and also indicates the differential spatial impacts and vulnerability of multiple uses of water to changes over time. The simulations showed that the measures proposed and the water from interbasin transfer project of the São Francisco River had a positive

HoneyComb: An Application-Driven Online Adaptive Reconfigurable Hardware Architecture

Directory of Open Access Journals (Sweden)

Alexander Thomas

2012-01-01

Full Text Available Since the introduction of the first reconfigurable devices in 1985 the field of reconfigurable computing developed a broad variety of architectures from fine-grained to coarse-grained types. However, the main disadvantages of the reconfigurable approaches, the costs in area, and power consumption, are still present. This contribution presents a solution for application-driven adaptation of our reconfigurable architecture at register transfer level (RTL to reduce the resource requirements and power consumption while keeping the flexibility and performance for a predefined set of applications. Furthermore, implemented runtime adaptive features like online routing and configuration sequencing will be presented and discussed. A presentation of the prototype chip of this architecture designed in 90 nm standard cell technology manufactured by TSMC will conclude this contribution.

Optically controlled reconfigurable antenna for 5G future broadband cellular communication networks

DEFF Research Database (Denmark)

Costa, I.F. da; Spadoti, D. H.; Cerqueira Sodre Jr., Arismar

2017-01-01

This paper presents an optically controlled reconfigurable antenna for millimetre-wave frequency range. Silicon switches are used to control the optical reconfiguration, modifying the frequency response and radiation pattern of the antenna design. Therefore, the system can switch between the ligh......This paper presents an optically controlled reconfigurable antenna for millimetre-wave frequency range. Silicon switches are used to control the optical reconfiguration, modifying the frequency response and radiation pattern of the antenna design. Therefore, the system can switch between...

Reconfigurable antennas radiations using plasma Faraday cage

OpenAIRE

Barro , Oumar Alassane; Himdi , Mohamed; Lafond , Olivier

2015-01-01

International audience; This letter presents a new reconfigurable plasma antenna associated with a Faraday cage. The Faraday cage is realized using a fluorescent lamp. A patch antenna with a broadside radiation pattern or a monopole antenna with an end-fire radiation pattern , operating at 2.45 GHz, is placed inside Faraday cage. The performance of the reconfigurable system is observed in terms of input reflection coefficient, gain and radiation pattern via simulation and measurement. It is s...

Terrain Adaptive Reconfiguration of Mobility

Data.gov (United States)

National Aeronautics and Space Administration — Develop an algorithm (and software) to automatically adapt a reconfigurable robot to different types of terrains for improved mobility, that compared to SOA:...

Portable reconfigurable detection and assessment system

International Nuclear Information System (INIS)

Blattman, D.A.

1991-01-01

Rapidly changing geopolitical issues throughout the world have made the ability to effectively respond to political, military, terrorist and peace-keeping requirements increasingly important. Recent Middle East events indicate a continuing escalation in these activities. These activities are defining the requirements for a rapidly deployable, portable, real-time detection and assessment operational security system that is reconfigurable to site specific threats. This paper describes such a system Mobile Operational Detection and Assessment system (MODAS); a commercially-off-the shelf (COTS) integrated and reconfigurable hardware/software system solution for the ever-changing geopolitical security issues of the Nineties

Desenvolvimento de hardware reconfigurável de criptografia assimétrica

Directory of Open Access Journals (Sweden)

Otávio Souza Martins Gomes

2015-01-01

Full Text Available Este artigo apresenta o resultado parcial do desenvolvimento de uma interface de hardware reconfigurável para criptografia assimétrica que permite a troca segura de dados. Hardwares reconfiguráveis permitem o desenvolvimento deste tipo de dispositivo com segurança e flexibilidade e possibilitam a mudança de características no projeto com baixo custo e de forma rápida.Palavras-chave: Criptografia. Hardware. ElGamal. FPGA. Segurança. Development of an asymmetric cryptography reconfigurable harwadre ABSTRACTThis paper presents some conclusions and choices about the development of an asymmetric cryptography reconfigurable hardware interface to allow a safe data communication. Reconfigurable hardwares allows the development of this kind of device with safety and flexibility, and offer the possibility to change some features with low cost and in a fast way.Keywords: Cryptography. Hardware. ElGamal. FPGAs. Security.

PV Reconfiguration Systems: a Technical and Economic Study

Directory of Open Access Journals (Sweden)

Caruso M.

2017-03-01

Full Text Available Dynamical electrical array reconfiguration strategies for grid-connected PV systems have been proposed as solution to improve energy production due to the mismatch effect of PV plants during partial shading conditions. Strategies are based on the use of dynamic connections between PV panels given by the employment of switches that allow for each panel the series, parallel or exclusion connections, physically changing the electrical connections between the related PV modules, consequentially modifying the layout of the plant. Usually the cost of the dynamic matrix is not taken into account. This novel work evaluates the economic advantages obtained by the use of reconfiguration strategies in PV systems, by taking into consideration the price of energy due to incentives in different European and non-European countries and correlates it with the employment of two types of reconfigurators, with different internal structures. For each of the incentives proposed by the different Countries, the main strength and weakness points of the possible investment are highlighted and critically analyzed. From this analysis, it can be stated that the adoption of reconfiguration systems, in certain cases, can be a very convenient solution.

The socio-economic and spatial transformation of Polish cities after 1989

Directory of Open Access Journals (Sweden)

Jerzy J. Parysek

2004-01-01

Full Text Available The aim of this paper is to present the socio-economic and spatial transformation of Polishcities after 1989. The Polish changes reached the structures of the three basic subsystems ofthe state: political (power, social (society, and economic (the economy. The systemictransformation that has taken place in Poland after 1989 is most readily visible in towns,although it was introduced in the country as a whole. For the development and transformationof towns, the most important were the introduction of local government structures andthe market model of the economy. The restitution of local government has ensured townsan authentic manager authorised to perform his function by the local community. The introductionof the market model to the economy has resulted in its privatisation and the appearanceof enterprise and competition. Towns, especially the biggest cities, have becomeattractive locations for investment. Cities with a balanced economic structure and well-developedinfrastructure had much better chances for growth to start with. Unfortunately, thetransformation period has also had some detrimental effects, the most important being unemploymentand all kinds of social deviance. However, Polish cities are certainly differenttoday and resemble Western cities to a greater extent than did the so-called socialist townsbuilt along theoretically beautiful but practically ineffectual ideological lines.

What limits the utilization of health services among china labor force? analysis of inequalities in demographic, socio-economic and health status.

Science.gov (United States)

Lu, Liming; Zeng, Jingchun; Zeng, Zhi

2017-02-02

Inequalities in demographic, socio-economic and health status for China labor force place them at greater health risks, and marginalized them in the utilization of healthcare services. This paper identifies the inequalities which limit the utilization of health services among China labor force, and provides a reference point for health policy. Data were collected from 23,505 participants aged 15 to 65, from the 2014 China Labor Force Dynamic Survey (a nationwide cross-sectional survey covering 29 provinces with a multi-stage cluster, and stratified, probability sampling strategy) conducted by Sun Yat-sen University. Logistic regression models were used to study the effects of demographic (age, gender, marital status, type of hukou and migration status), socio-economic (education, social class and insurance) and health status (self-perceived general health and several chronic illnesses) variables on the utilization of health services (two-week visiting and hospitalization during the past 12 months). Goodness of fit was assessed using Hosmer-Lemeshow test. Discrimination ability was assessed based on the area under the receiver operating curve (AUC). Migrants with more than 1 (OR 2.80, 95% CI 1.01 ~ 7.82) or none chronic illnesses (OR 1.26, 95% CI 1.01 ~ 7.82) are more likely to be two week visiting to the clinic than non-migrants; migrants with none chronic illnesses (OR 0.61, 95% CI 0.45 ~ 0.82) are less likely to be in hospitalization during the past 12 months than non-migrants. Female, elder, hukou of non-agriculture, higher education level, higher social class, purchasing more insurance and poorer self-perceived health were predictors for more utilization of health service. More insurance benefited more two-week visiting (OR 1.12, 95% CI 1.06 ~ 1.17) and hospitalization during the past 12 months (OR 1.12, 95% CI 1.07 ~ 1.18) for individuals with none chronic illness but not ≥1 chronic illnesses. All models achieved good calibration

Harmonious Development between Socio-Economy and River-Lake Water Systems in Xiangyang City, China

Directory of Open Access Journals (Sweden)

Qiting Zuo

2016-11-01

Full Text Available River-lake water systems (RLS are important carriers for matter transformation and energy transmission. Influenced by accelerated social and economic development, the structural, functional, and environmental states of RLS have been seriously damaged. It is an important problem for human beings to coordinate the contradiction between socio-economic development and the protection of RLS. In order to quantitatively study the harmonious relationship between socio-economic development and the state of RLS, the harmony theory method was used to analyze the degree of harmonious development between socio-economy and RLS in this study taking Xiangyang City as an example, and formulating corresponding harmonious optimization schemes. The results indicate that: (1 the state of RLS had a relatively small change during 2009–2014, and its spatial distribution shows a decreasing trend with the Han River as the central axis decreases on both of its sides; (2 before 2011, the driving force of socio-economic development in Xiang yang City mainly originated in the peripheral regions such as Laohekou City, Zaoyang City, and Gucheng County, but after 2011, it migrated rapidly towards Downtown, and reached the maximum in 2014; (3 when the influence of regional socio-economic development on RLS is small, socio-economic development is the main factor driving the change of the overall harmonious development degree of socio-economy and RLS. However when the influence is big, it is combined, driven by socio-economic development and the state of RLS; (4 the main factors affecting the overall harmonious degree of socio-economy and RLS in Xiangyang City include: river length, standard ratio of water quality, water consumption per capita, reservoir regulation capability, farmland irrigation water consumption per Mu (Mu is an area unit in China, 1 Mu approximately equals to 666.67 m2, and sewage treatment rate. This study can provide a reference for the future analysis of

Force scanning: a rapid, high-resolution approach for spatial mechanical property mapping

International Nuclear Information System (INIS)

Darling, E M

2011-01-01

Atomic force microscopy (AFM) can be used to co-localize mechanical properties and topographical features through property mapping techniques. The most common approach for testing biological materials at the microscale and nanoscale is force mapping, which involves taking individual force curves at discrete sites across a region of interest. The limitations of force mapping include long testing times and low resolution. While newer AFM methodologies, like modulated scanning and torsional oscillation, circumvent this problem, their adoption for biological materials has been limited. This could be due to their need for specialized software algorithms and/or hardware. The objective of this study is to develop a novel force scanning technique using AFM to rapidly capture high-resolution topographical images of soft biological materials while simultaneously quantifying their mechanical properties. Force scanning is a straightforward methodology applicable to a wide range of materials and testing environments, requiring no special modification to standard AFMs. Essentially, if a contact-mode image can be acquired, then force scanning can be used to produce a spatial modulus map. The current study first validates this technique using agarose gels, comparing results to ones achieved by the standard force mapping approach. Biologically relevant demonstrations are then presented for high-resolution modulus mapping of individual cells, cell-cell interfaces, and articular cartilage tissue.

An adaptive cryptographic accelerator for network storage security on dynamically reconfigurable platform

Science.gov (United States)

Tang, Li; Liu, Jing-Ning; Feng, Dan; Tong, Wei

2008-12-01

Existing security solutions in network storage environment perform poorly because cryptographic operations (encryption and decryption) implemented in software can dramatically reduce system performance. In this paper we propose a cryptographic hardware accelerator on dynamically reconfigurable platform for the security of high performance network storage system. We employ a dynamic reconfigurable platform based on a FPGA to implement a PowerPCbased embedded system, which executes cryptographic algorithms. To reduce the reconfiguration latency, we apply prefetch scheduling. Moreover, the processing elements could be dynamically configured to support different cryptographic algorithms according to the request received by the accelerator. In the experiment, we have implemented AES (Rijndael) and 3DES cryptographic algorithms in the reconfigurable accelerator. Our proposed reconfigurable cryptographic accelerator could dramatically increase the performance comparing with the traditional software-based network storage systems.

Trajectory Generation and Stability Analysis for Reconfigurable Klann Mechanism Based Walking Robot

Directory of Open Access Journals (Sweden)

Jaichandar Kulandaidaasan Sheba

2016-06-01

Full Text Available Reconfigurable legged robots based on one degree of freedom are highly desired because they are effective on rough and irregular terrains and they provide mobility in such terrain with simple control schemes. It is necessary that reconfigurable legged robots should maintain stability during rest and motion, with a minimum number of legs while maintaining their full range of walking patterns resulting from different gait configuration. In this paper we present a method to generate input trajectory for reconfigurable quadruped robots based on Klann mechanism to properly synchronize movement. Six useful gait cycles based on this reconfigurable Klann mechanism for quadruped robots has been clearly shown here. The platform stability for these six useful gait cycles are validated through simulated results which clearly shows the capabilities of reconfigurable design.

Efficient integration of plug-in electric vehicles via reconfigurable microgrids

International Nuclear Information System (INIS)

Kavousi-Fard, Abdollah; Khodaei, Amin

2016-01-01

This paper investigates the viability of the reconfigurable microgrids (RMGs) in facilitating the integration of plug-in electric vehicles (PEVs). The reconfiguration ability of microgrids, which is enabled by the use of remotely controlled switches (RCSs), will support the high penetration of PEVs and renewable distributed generators (DGs) while reducing the total operation cost and potentially enhance microgrid reliability. The objective of the proposed optimal scheduling problem is to minimize the total cost of power supply by distributed energy resources (DERs) and upstream network energy exchange, battery degradation cost in PEVs, cost of switching during the reconfiguration, and expected customer interruption costs as a reliability index. To address the high level of the uncertainties in the problem, a scenario-based stochastic framework is devised to capture the uncertainties associated with the charging and discharging values of PEVs, number of PEVs in each fleet, time of the daily trips for PEVs, hourly load consumption, hourly output power of renewable DGs, and hourly market price. The satisfying performance and merits of the proposed model are examined on a test microgrid. - Highlights: • Introduction of reconfigurable microgrids for providing flexible structure to manage electric loads. • Assessing the effects of the reconfiguration on the integration of PEVs. • Introduction of a stochastic framework for reducing operation and reliability costs in microgrids. • Introduction of a smart charge/discharge scheme for PEVs based on V2G during the reconfiguration.

Reconfiguring Cooperative Work by Visualizing EPR on Large Projected Screens

DEFF Research Database (Denmark)

Simonsen, Jesper

Simonsen, J. (2006): Reconfiguring Cooperative Work by Visualizing EPR on Large Projected Screens, Paper presented at the PDC 2006 workshop on: Reconfiguring Healthcare: Issues in Computer Supported Cooperative Work in Healthcare Environments. Participatory Design Conference, Trento, Italy, August...

Short-Term Load Forecasting Based Automatic Distribution Network Reconfiguration: Preprint

Energy Technology Data Exchange (ETDEWEB)

Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-07-26

In the traditional dynamic network reconfiguration study, the optimal topology is determined at every scheduled time point by using the real load data measured at that time. The development of load forecasting technique can provide accurate prediction of load power that will happen in future time and provide more information about load changes. With the inclusion of load forecasting, the optimal topology can be determined based on the predicted load conditions during the longer time period instead of using the snapshot of load at the time when the reconfiguration happens, and thus it can provide information to the distribution system operator (DSO) to better operate the system reconfiguration to achieve optimal solutions. Thus, this paper proposes a short-term load forecasting based approach for automatically reconfiguring distribution systems in a dynamic and pre-event manner. Specifically, a short-term and high-resolution distribution system load forecasting approach is proposed with support vector regression (SVR) based forecaster and parallel parameters optimization. And the network reconfiguration problem is solved by using the forecasted load continuously to determine the optimal network topology with the minimum loss at the future time. The simulation results validate and evaluate the proposed approach.

Self-Reconfiguration Planning of Robot Embodiment for Inherent Safe Performance

Science.gov (United States)

Uchida, Masafumi; Nozawa, Akio; Asano, Hirotoshi; Onogaki, Hitoshi; Mizuno, Tota; Park, Young-Il; Ide, Hideto; Yokoyama, Shuichi

In the situation in which a robot and a human work together by collaborating with each other, a robot and a human share one working environment, and each interferes in each other. In other ward, it is impossible to avoid the physical contact and the interaction of force between a robot and a human. The boundary of each complex dynamic occupation area changes in the connection movement which is the component of collaborative works at this time. The main restraint condition which relates to the robustness of that connection movement is each physical charactristics, that is, the embodiment. A robot body is variability though the embodiment of a human is almost fixed. Therefore, the safe and the robust connection movement is brought when a robot has the robot body which is well suitable for the embodiment of a human. A purpose for this research is that the colaboration works between the self-reconfiguration robot and a human is realized. To achieve this purpose, a self-reconfiguration algorithm based on some indexes to evaluate a robot body in the macroscopic point of view was examined on a modular robot system of the 2-D lattice structure. In this paper, it investigated effect specially that the object of learning of each individual was limited to the cooperative behavior between the adjoining modules toward the macroscopic evaluation index.

Reconfigurable Integrated Optoelectronics

Directory of Open Access Journals (Sweden)

Richard Soref

2011-01-01

Full Text Available Integrated optics today is based upon chips of Si and InP. The future of this chip industry is probably contained in the thrust towards optoelectronic integrated circuits (OEICs and photonic integrated circuits (PICs manufactured in a high-volume foundry. We believe that reconfigurable OEICs and PICs, known as ROEICs and RPICs, constitute the ultimate embodiment of integrated photonics. This paper shows that any ROEIC-on-a-chip can be decomposed into photonic modules, some of them fixed and some of them changeable in function. Reconfiguration is provided by electrical control signals to the electro-optical building blocks. We illustrate these modules in detail and discuss 3D ROEIC chips for the highest-performance signal processing. We present examples of our module theory for RPIC optical lattice filters already constructed, and we propose new ROEICs for directed optical logic, large-scale matrix switching, and 2D beamsteering of a phased-array microwave antenna. In general, large-scale-integrated ROEICs will enable significant applications in computing, quantum computing, communications, learning, imaging, telepresence, sensing, RF/microwave photonics, information storage, cryptography, and data mining.

The Complete Reconfiguration of Dendritic Gold

Science.gov (United States)

Paneru, Govind; Flanders, Bret

2014-03-01

Reconfigurability-by-design is an important strategy in modern materials science, as materials with this capability could potentially be used to confer hydrophobic, lipophobic, or anti-corrosive character to substrates in a regenerative manner. The present work extends the directed electrochemical nanowire assembly (DENA) methodology, which is a technique that employs alternating voltages to grow single crystalline metallic nanowires and nano-dendrites from simple salt solutions, to enable the complete dissolution of macroscopic arrays of metallic dendrites following their growth. Our main finding is that structural reconfiguration of dendritic gold is induced by changes in the MHz-level frequencies of voltages that are applied to the dendrites. Cyclic voltammetry and micro-Raman spectroscopy have been used to show that dendritic gold grows and dissolves by the same chemical mechanisms as bulk gold. Hence, the redox chemistry that occurs at the crystal-solution interface is no different than the established electrochemistry of gold. What differs in this process and allows for reconfiguration to occur is the diffusive behavior of the gold chloride molecules in the solution adjacent to the interface. We will present a simple model that captures the physics of this behavior.

Enabling Self-Organization in Embedded Systems with Reconfigurable Hardware

Directory of Open Access Journals (Sweden)

Christophe Bobda

2009-01-01

Full Text Available We present a methodology based on self-organization to manage resources in networked embedded systems based on reconfigurable hardware. Two points are detailed in this paper, the monitoring system used to analyse the system and the Local Marketplaces Global Symbiosis (LMGS concept defined for self-organization of dynamically reconfigurable nodes.

Reconfigurable computing the theory and practice of FPGA-based computation

CERN Document Server

Hauck, Scott

2010-01-01

Reconfigurable Computing marks a revolutionary and hot topic that bridges the gap between the separate worlds of hardware and software design- the key feature of reconfigurable computing is its groundbreaking ability to perform computations in hardware to increase performance while retaining the flexibility of a software solution. Reconfigurable computers serve as affordable, fast, and accurate tools for developing designs ranging from single chip architectures to multi-chip and embedded systems. Scott Hauck and Andre DeHon have assembled a group of the key experts in the fields of both hardwa

Neighbourhoods of Peace; cities of hostility: exploring the socio-spatial dimentions of peace and place in the 21st Century and its implications for future cities

CSIR Research Space (South Africa)

Landman, K

2006-08-01

Full Text Available residents. In order to investigate this relationship, it also reviews the concept 'piece of mind' and its connection with the nature and sense of place in cities. It argues for a socio-spatial understanding of peace and place and therefore for a...

Reconfigurable, Cognitive Software-Defined Radio

Science.gov (United States)

Bhat, Arvind

2015-01-01

Software-defined radio (SDR) technology allows radios to be reconfigured to perform different communication functions without using multiple radios to accomplish each task. Intelligent Automation, Inc., has developed SDR platforms that switch adaptively between different operation modes. The innovation works by modifying both transmit waveforms and receiver signal processing tasks. In Phase I of the project, the company developed SDR cognitive capabilities, including adaptive modulation and coding (AMC), automatic modulation recognition (AMR), and spectrum sensing. In Phase II, these capabilities were integrated into SDR platforms. The reconfigurable transceiver design employs high-speed field-programmable gate arrays, enabling multimode operation and scalable architecture. Designs are based on commercial off-the-shelf (COTS) components and are modular in nature, making it easier to upgrade individual components rather than redesigning the entire SDR platform as technology advances.

Drivers behind widespread informal payments in the Romanian public health care system: From tolerance to corruption to socio-economic and spatial patterns.

Science.gov (United States)

Horodnic, Adrian V; Mazilu, Sorin; Oprea, Liviu

2018-03-15

In order to explain informal payments in public health care services in Romania, this paper evaluates the relationship between extra payments or valuable gifts (apart from official fees) and the level of tolerance to corruption, as well as the socio-economic and spatial patterns across those individuals offering informal payments. To evaluate this, a survey undertaken in 2013 is reported. Using logistic regression analysis, the findings are that patients with a high tolerance to corruption, high socio-economic risk (those divorced, separated, or with other form of marital status, and those not working), and located in rural or less affluent areas are more likely to offer (apart from official fees) extra payments or valuable gifts for health care services. The paper concludes by discussing the health policy implications. Copyright © 2018 John Wiley & Sons, Ltd.

Constraints on spatially oscillating sub-mm forces from the Stanford Optically Levitated Microsphere Experiment data

Science.gov (United States)

Antoniou, I.; Perivolaropoulos, L.

2017-11-01

A recent analysis by one of the authors [L. Perivolaropoulos, Phys. Rev. D 95, 084050 (2017), 10.1103/PhysRevD.95.084050] has indicated the presence of a 2 σ signal of spatially oscillating new force residuals in the torsion balance data of the Washington experiment. We extend that study and analyze the data of the Stanford Optically Levitated Microsphere Experiment (SOLME) [A. D. Rider et al., Phys. Rev. Lett. 117, 101101 (2016), 10.1103/PhysRevLett.117.101101] (kindly provided by A. D. Rider et al.) searching for sub-mm spatially oscillating new force signals. We find a statistically significant oscillating signal for a force residual of the form F (z )=α cos (2/π λ z +c ) where z is the distance between the macroscopic interacting masses (levitated microsphere and cantilever). The best fit parameter values are α =(1.1 ±0.4 )×10-17N , λ =(35.2 ±0.6 ) μ m . Monte Carlo simulation of the SOLME data under the assumption of zero force residuals has indicated that the statistical significance of this signal is at about 2 σ level. The improvement of the χ2 fit compared to the null hypothesis (zero residual force) corresponds to Δ χ2=13.1 . There are indications that this previously unnoticed signal is indeed in the data but is most probably induced by a systematic effect caused by diffraction of non-Gaussian tails of the laser beam. Thus the amplitude of this detected signal can only be useful as an upper bound to the amplitude of new spatially oscillating forces on sub-mm scales. In the context of gravitational origin of the signal emerging from a fundamental modification of the Newtonian potential of the form Veff(r )=-G M/r (1 +αOcos (2/π λ r +θ ))≡VN(r )+Vosc(r ) , we evaluate the source integral of the oscillating macroscopically induced force. If the origin of the SOLME oscillating signal is systematic, the parameter αO is bounded as αOchameleon oscillating potentials etc.).

El Diseño Modular en el contexto del desarrollo de Máquinas Herramienta Reconfigurables. // Modular Design in the development of reconfigurable Machine Tools´ context.

Directory of Open Access Journals (Sweden)

R. Pérez Rodríguez

2005-05-01

Full Text Available Las tendencias actuales en los procesos de manufactura reflejan los cambios en las demandas de los clientes. En nuestrosdías, el mercado requiere inexorablemente de productos cada vez más personalizados, por lo que se tiende de unaproducción masiva hacia un tipo específico de producción, en menos tiempo y con menos costos de producción. Enrespuesta a esta necesidad, la nueva generación de máquinas herramienta debe de ser reconfigurable e inteligente. Lascaracterísticas principales de las Máquinas Reconfigurables e Inteligentes son la modularidad, convertibilidad, flexibilidady efectividad en los costos. Este artículo presenta un enfoque para el diseño modular de máquinas herramienta, basado en elportafolio de productos del constructor de máquinas. La metodología parte de un conjunto de requerimientos funcionalesdefinidos por el constructor de máquinas y ofrece una descripción de los posibles módulos que pueden ser desarrolladospara una determinada máquina herramienta reconfigurable.Palabras claves: Diseño modular, máquinas herramienta, reconfigurable, inteligente.___________________________________________________________________________Abstract.The manufacturing tendencies reflect the changes on the customer demands. Nowadays, the market is constantly requiringmore customized products, moving from mass production to “one-of-a-kind production” in less time with lower productioncosts. In response to this need, the next generation of machine tools should be reconfigurable and intelligent.Reconfigurability allows for the reduction of machine design lead time, machine set-up and ramp-up time. The principalcharacteristics of the Reconfigurable and Intelligent Machines are modularity, convertibility, flexibility and costeffectiveness.This paper presents an approach for the design of machine tools modules, based on the product portfolio ofthe machine tool builder. The methodology takes as input a set of functional requirements

Socio-economic factors of bacillary dysentery based on spatial correlation analysis in Guangxi Province, China.

Directory of Open Access Journals (Sweden)

Chengjing Nie

Full Text Available BACKGROUND: In the past decade, bacillary dysentery was still a big public health problem in China, especially in Guangxi Province, where thousands of severe diarrhea cases occur every year. METHODS: Reported bacillary dysentery cases in Guangxi Province were obtained from local Centers for Diseases Prevention and Control. The 14 socio-economic indexes were selected as potential explanatory variables for the study. The spatial correlation analysis was used to explore the associations between the selected factors and bacillary dysentery incidence at county level, which was based on the software of ArcGIS10.2 and GeoDA 0.9.5i. RESULTS: The proportion of primary industry, the proportion of younger than 5-year-old children in total population, the number of hospitals per thousand persons and the rates of bacillary dysentery incidence show statistically significant positive correlation. But the proportion of secondary industry, per capital GDP, per capital government revenue, rural population proportion, popularization rate of tap water in rural area, access rate to the sanitation toilets in rural, number of beds in hospitals per thousand persons, medical and technical personnel per thousand persons and the rate of bacillary dysentery incidence show statistically significant negative correlation. The socio-economic factors can be divided into four aspects, including economic development, health development, medical development and human own condition. The four aspects were not isolated from each other, but interacted with each other.

Architecture for dynamically reconfigurable real-time lossless compression

Science.gov (United States)

Carter, Alison J.; Audsley, Neil C.

2004-05-01

Image compression is a computationally intensive task, which can be undertaken most efficiently by dedicated hardware. If a portable device is to carry out real-time compression on a variety of image types, then it may be useful to reconfigure the circuitry dynamically. Using commercial off-the shelf (COTS) chips, reconfiguration is usually implemented by a complete re-load from memory, but it is also possible to perform a partial reconfiguration. This work studies the use of programmable hardware devices to implement the lossless JPEG compression algorithm in real-time on a stream of independent image frames. The data rate is faster than can be compressed serially in hardware by a single processor, so the operation is split amongst several processors. These are implemented as programmable circuits, together with necessary buffering of input and output data. The timing of input and output, bearing in mind the different, and context-dependent amounts of data due to Huffman coding, is analyzed using storage-timing graphs. Because there may be differing parameters from one frame to the next, several different configurations are prepared and stored, ready to load as required. The scheduling of these reconfigurations, and the distribution/recombination of data streams is studied, giving an analysis of the real-time performance.

Investigating the dependence of SCM simulated precipitation and clouds on the spatial scale of large-scale forcing at SGP

Science.gov (United States)

Tang, Shuaiqi; Zhang, Minghua; Xie, Shaocheng

2017-08-01

Large-scale forcing data, such as vertical velocity and advective tendencies, are required to drive single-column models (SCMs), cloud-resolving models, and large-eddy simulations. Previous studies suggest that some errors of these model simulations could be attributed to the lack of spatial variability in the specified domain-mean large-scale forcing. This study investigates the spatial variability of the forcing and explores its impact on SCM simulated precipitation and clouds. A gridded large-scale forcing data during the March 2000 Cloud Intensive Operational Period at the Atmospheric Radiation Measurement program's Southern Great Plains site is used for analysis and to drive the single-column version of the Community Atmospheric Model Version 5 (SCAM5). When the gridded forcing data show large spatial variability, such as during a frontal passage, SCAM5 with the domain-mean forcing is not able to capture the convective systems that are partly located in the domain or that only occupy part of the domain. This problem has been largely reduced by using the gridded forcing data, which allows running SCAM5 in each subcolumn and then averaging the results within the domain. This is because the subcolumns have a better chance to capture the timing of the frontal propagation and the small-scale systems. Other potential uses of the gridded forcing data, such as understanding and testing scale-aware parameterizations, are also discussed.

Configuration Method Design for Reconfigurable Manufacturing System with the aid of Plant Simulation

DEFF Research Database (Denmark)

Li, Yang; Zhang, Shuai; Bilberg, Arne

2014-01-01

A new Reconfigurable Manufacturing System structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to balance the performance of productivity and flexibility. This article shows an exploratory research on the (re)configuration procedure of the new RMS structure....... Following the procedure which is designed in this paper, the (re)configuration of RMS can be managed as part of the daily operation with the help of computer simulation. Keywords: Plant Simulation, Tecnomatix, Reconfigurable Manufacturing System, modular manufacturing....

Centralised versus Decentralised Control Reconfiguration for Collaborating Underwater Robots

DEFF Research Database (Denmark)

Furno, Lidia; Nielsen, Mikkel Cornelius; Blanke, Mogens

2015-01-01

The present paper introduces an approach to fault-tolerant reconfiguration for collaborating underwater robots. Fault-tolerant reconfiguration is obtained using the virtual actuator approach, Steen (2005). The paper investigates properties of a centralised versus a decentralised implementation an...... an underwater drill needs to be transported and positioned by three collaborating robots as part of an underwater autonomous operation....

The Global Experience of Development of the Theory of Spatial Distribution of Productive Forces

Directory of Open Access Journals (Sweden)

Heiman Oleh A.

2016-01-01

Full Text Available The publication is aimed at theoretical generalization of the global experience of development of the theory of spatial distribution of productive forces as the basis of regional economy. Considering the evolution of scientific views on the spatial development of territories, taking account of the particularities of the distribution of production, one can allocate and identify several paradigms, which replaced each other, but preserved their connection with the placement of productive forces. Each one of these paradigms or all of them as a whole provide an example of a single historical process associated with the productive forces. Characteristic of a methodology based on the spatiotemporal paradigm is consideration of both time and space factors, which, in substance, take on the qualities of economic categories. Speaking of the use of theoretical developments in the practice of regional development, it should be specified that programs, strategies and other regulations must take into account the linkage between the progressive and the negative trends as well as cyclical nature of economic development, including the global economy, identify the factors that accelerate or retard the passage of every evolutionary spiral, and observe consistency of the productive forces of region with the technological patterns of production.

STRATEGIC RECONFIGURATION AND MANAGEMENT OF RETAIL CENTRES CREATING COMPETITIVE ADVANTAGE THROUGH COMMUNICATIVE COMPETENCE

Directory of Open Access Journals (Sweden)

Tore Omholt

2002-01-01

Full Text Available In the last decade, the retail industry in many countries, including some Asian countries has undergone great changes due to a more dynamic and turbulent environment. This amongst other things has led to a concentration of retail functions in out-of-town regional shopping centres. This development can be explained by pointing to the traditional, segmentalist ways of strategic management in the retail sector, which to a large degree has looked upon location as the most important, and in many cases, the only source of competitive advantage. It has also treated the retail centre as a nexus of contracts based in turn on a series of bilateral contracts. These ways are in our opinion no longer able to deal with an increasingly dynamic environment, especially in traditional town centres. We are given some examples, however, where successful strategic response is characterized by extensive market research and intimate consumer knowledge, but these kinds of capabilities or skills seem to be confined to the typical multinational chain organization. One seldom finds innovative town centres or dynamic shopping centres with similar capabilities. Our view is that a dynamic reconfiguration will have to take place and be coordinated in a more multilateral fashion without having to resort to excessive communication and information processing to achieve a transformative reconfiguration. In this paper we have tried to show that an approach based on a socio-cybernetic framework and the development of several types of communicative competences, may be effective for the development of competitive advantage for a retail centre.

Compact, Frequency Reconfigurable, Printed Monopole Antenna

Directory of Open Access Journals (Sweden)

Ricardo Gonçalves

2012-01-01

Full Text Available This paper proposes a possible implementation of a compact printed monopole antenna, useful to operate in UMTS and WLAN bands. In order to accomplish that, a miniaturization technique based on the application of chip inductors is used in conjunction with frequency reconfiguration capability. The chip inductors change the impedance response of the monopole, allowing to reduce the resonant frequency. In order to be able to operate the antenna in these two different frequencies, an antenna reconfiguration technique based on PIN diodes is applied. This procedure allows the change of the active form of the antenna leading to a shift in the resonant frequency. The prototype measurements show good agreement with the simulation results.

The socio-economic and spatial transformation of Polish cities after 1989

Directory of Open Access Journals (Sweden)

Jerzy J. Parysek

2004-12-01

Full Text Available The aim of this paper is to present the socio-economic and spatial transformation of Polish cities after 1989. The Polish changes reached the structures of the three basic subsystems of the state: political (power, social (society, and economic (the economy. The systemic transformation that has taken place in Poland after 1989 is most readily visible in towns, although it was introduced in the country as a whole. For the development and transforma-tion of towns, the most important were the introduction of local government structures and the market model of the economy. The restitution of local government has ensured towns an authentic manager authorised to perform his function by the local community. The in-troduction of the market model to the economy has resulted in its privatisation and the ap-pearance of enterprise and competition. Towns, especially the biggest cities, have become attractive locations for investment. Cities with a balanced economic structure and well-de-veloped infrastructure had much better chances for growth to start with. Unfortunately, the transformation period has also had some detrimental effects, the most important being un-employment and all kinds of social deviance. However, Polish cities are certainly different today and resemble Western cities to a greater extent than did the so-called socialist towns built along theoretically beautiful but practically ineffectual ideological lines.

Using instability to reconfigure smart structures in a spring-mass model

Science.gov (United States)

Zhang, Jiaying; McInnes, Colin R.

2017-07-01

Multistable phenomenon have long been used in mechanism design. In this paper a subset of unstable configurations of a smart structure model will be used to develop energy-efficient schemes to reconfigure the structure. This new concept for reconfiguration uses heteroclinic connections to transition the structure between different unstable equal-energy states. In an ideal structure model zero net energy input is required for the reconfiguration, compared to transitions between stable equilibria across a potential barrier. A simple smart structure model is firstly used to identify sets of equal-energy unstable configurations using dynamical systems theory. Dissipation is then added to be more representative of a practical structure. A range of strategies are then used to reconfigure the smart structure using heteroclinic connections with different approaches to handle dissipation.

Autonomous Reconfiguration Procedures for EJB-based Enterprise Applications

OpenAIRE

Vogel, Thomas; Bruhn, Jens; Wirtz, Guido

2018-01-01

Enterprise Applications (EA) are complex software systems for supporting the business of companies. Evolution of an EA should not affect its availability, e.g., because of a temporal shutdown, business operations may be affected. One possibility to address this problem is the seamless reconfiguration of the affected EA, i.e., applying the relevant changes while the system is running. Our approach to seamless reconfiguration focuses on component-oriented EAs. It is based on the Autonomic Compu...

Dynamic Reconfiguration in Mobile Systems

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Glesner, Manfred; Zipf, Peter; Smit, L.T.; Havinga, Paul J.M.; Heysters, P.M.; Renovell, Michel; Rosien, M.A.J.

Dynamically reconfigurable systems have the potential of realising efficient systems as well as providing adaptability to changing system requirements. Such systems are suitable for future mobile multimedia systems that have limited battery resources, must handle diverse data types, and must operate

Reconfiguration in Mobile Multimedia Systems

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Havinga, Paul J.M.; Bos, M.; Smit, L.T.; Heysters, P.M.

2000-01-01

Dynamically reconfigurable systems offer the potential for realising efficient systems as well as providing adaptability to changing system requirements. Such systems are suitable for future mobile multimedia systems that have limited battery resources, must handle diverse data types, and must

A Taxonomy of Reconfigurable Single-/Multiprocessor Systems-on-Chip

Directory of Open Access Journals (Sweden)

Diana Göhringer

2009-01-01

Full Text Available Runtime adaptivity of hardware in processor architectures is a novel trend, which is under investigation in a variety of research labs all over the world. The runtime exchange of modules, implemented on a reconfigurable hardware, affects the instruction flow (e.g., in reconfigurable instruction set processors or the data flow, which has a strong impact on the performance of an application. Furthermore, the choice of a certain processor architecture related to the class of target applications is a crucial point in application development. A simple example is the domain of high-performance computing applications found in meteorology or high-energy physics, where vector processors are the optimal choice. A classification scheme for computer systems was provided in 1966 by Flynn where single/multiple data and instruction streams were combined to four types of architectures. This classification is now used as a foundation for an extended classification scheme including runtime adaptivity as further degree of freedom for processor architecture design. The developed scheme is validated by a multiprocessor system implemented on reconfigurable hardware as well as by a classification of existing static and reconfigurable processor systems.

Reconfigurable manufacturing execution system for pipe cutting

Science.gov (United States)

Yin, Y. H.; Xie, J. Y.

2011-08-01

This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

Reconfigurable Robust Routing for Mobile Outreach Network

Science.gov (United States)

Lin, Ching-Fang

2010-01-01

The Reconfigurable Robust Routing for Mobile Outreach Network (R3MOO N) provides advanced communications networking technologies suitable for the lunar surface environment and applications. The R3MOON techn ology is based on a detailed concept of operations tailored for luna r surface networks, and includes intelligent routing algorithms and wireless mesh network implementation on AGNC's Coremicro Robots. The product's features include an integrated communication solution inco rporating energy efficiency and disruption-tolerance in a mobile ad h oc network, and a real-time control module to provide researchers an d engineers a convenient tool for reconfiguration, investigation, an d management.

Technical comparison of the commercialized Racon model 21000 Portable, Reconfigurable Line Sensor (PRLS) and original Sandia/USAF prototype

International Nuclear Information System (INIS)

Blattman, D.A.

1993-01-01

The military has been moving from a global strategic response with fixed site asset protection to regional tactical response requirements. This change necessitates high security sensor systems that can be easily relocated and rapidly placed in operation by unskilled operators. The Portable, Reconfigurable Line Sensor (PRLS) was developed by Sandia National Laboratories with United States Air Force funding. Racon, Inc. is now commercializing the PRLS through a Cooperative Research and Development Agreement (CRDA) with the United States Air Force. The commercialized design of the new PRLS bi-static radar sensor benefits from the extensive field testing of the original Sandia/USAF-developed engineering prototype systems of the 1980s. Tests conducted in hot, cold, wind, rain, and snow conditions verified exceptional intruder detection capability, resistance to spoofing attempts, and insusceptibility to mutual interference and nuisance alarms caused by birds or small animals. The use of 1990's implementation technology combined with extensive testing information has resulted in significant product performance enhancements as well as cost savings. This paper compares technical features of the original Sandia/USAF prototypes with the new commercialized Racon model 21000 Portable, Reconfigurable Line Sensor. The PRLS advances the art of outdoor security to meet the Relocatable Sensor System (RSS) challenge of the 1990s

A Novel Design of Frequency Reconfigurable Antenna for UWB Application

Science.gov (United States)

Yang, Xiaolin; Yu, Ziliang; Wu, Zheng; Shen, Huajiao

2016-09-01

In this paper, we present a novel frequency reconfigurable antenna which could be easily operate in a single notched-band (WiMAX (3.3-3.6 GHz)) UWB frequency band, another single notched-band (WLAN (5-6 GHz)) UWB frequency band and the dual band-notched UWB frequency band (the stopband covers the WiMAX (3.3-3.6 GHz) and WLAN (5-6 GHz)). The reconfigurability is achieved by changing the states of PIN diodes. The simulated results are in agreement well with the measured results. And the measured patterns are slightly changed with antenna reconfiguration. The proposed antenna is a good candidate for various UWB applications.

Reconfigurable and ultra-sensitive in-line Mach-Zehnder interferometer based on the fusion of microfiber and microfluid

Energy Technology Data Exchange (ETDEWEB)

Gao, Shecheng [Key Laboratory of Optical Information Science and Technology, Ministry of Education, Institute of Modern Optics, Nankai University, Tianjin 300071 (China); Institute of Micro and Nano Optics, Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen 518060 (China); Zhang, Weigang, E-mail: zhangwg@nankai.edu.cn, E-mail: haozhang@nankai.edu.cn; Zhang, Hao, E-mail: zhangwg@nankai.edu.cn, E-mail: haozhang@nankai.edu.cn [Key Laboratory of Optical Information Science and Technology, Ministry of Education, Institute of Modern Optics, Nankai University, Tianjin 300071 (China); Zhang, Chonglei [Institute of Micro and Nano Optics, Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen 518060 (China)

2015-02-23

A reconfigurable Mach-Zenhnder interferometer (MZI) based on a microfluidic cavity (MFC) constructed by embedding a microfiber between two segments of single-mode fibers with pre-designed lateral offset has been proposed and experimentally demonstrated. The MFC serves as an interference arm with an eccentric annular cross section and allows convenient sample (gas or liquids) replacement procedure. The microfiber works as the other interference arm that provides the proposed device with ease of reconstruction and also enhances the force sensitivity. The re-configurability and the ultra-wide tuning sensitivity range are demonstrated by immersing the MZI constructed with a 484 μm-long-MFC and a microfiber 44 μm in diameter in different droplets. Ultrahigh sensitivities of 34.65 nm/°C (∼88 380 nm/RIU) and −493.7 nm/N (∼−590 pm/με) are experimentally achieved using a droplet with a refractive index of ∼1.44.

Reconfigurable and ultra-sensitive in-line Mach-Zehnder interferometer based on the fusion of microfiber and microfluid

International Nuclear Information System (INIS)

Gao, Shecheng; Zhang, Weigang; Zhang, Hao; Zhang, Chonglei

2015-01-01

A reconfigurable Mach-Zenhnder interferometer (MZI) based on a microfluidic cavity (MFC) constructed by embedding a microfiber between two segments of single-mode fibers with pre-designed lateral offset has been proposed and experimentally demonstrated. The MFC serves as an interference arm with an eccentric annular cross section and allows convenient sample (gas or liquids) replacement procedure. The microfiber works as the other interference arm that provides the proposed device with ease of reconstruction and also enhances the force sensitivity. The re-configurability and the ultra-wide tuning sensitivity range are demonstrated by immersing the MZI constructed with a 484 μm-long-MFC and a microfiber 44 μm in diameter in different droplets. Ultrahigh sensitivities of 34.65 nm/°C (∼88 380 nm/RIU) and −493.7 nm/N (∼−590 pm/με) are experimentally achieved using a droplet with a refractive index of ∼1.44

Modular, Reconfigurable, High-Energy Technology Development

Science.gov (United States)

Carrington, Connie; Howell, Joe

2006-01-01

The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed

Machine Learning Control For Highly Reconfigurable High-Order Systems

Science.gov (United States)

2015-01-02

calibration and applications,” Mechatronics and Embedded Systems and Applications (MESA), 2010 IEEE/ASME International Conference on, IEEE, 2010, pp. 38–43...AFRL-OSR-VA-TR-2015-0012 MACHINE LEARNING CONTROL FOR HIGHLY RECONFIGURABLE HIGH-ORDER SYSTEMS John Valasek TEXAS ENGINEERING EXPERIMENT STATION...DIMENSIONAL RECONFIGURABLE SYSTEMS FA9550-11-1-0302 Period of Performance 1 July 2011 – 29 September 2014 John Valasek Aerospace Engineering

Block RAM-based architecture for real-time reconfiguration using Xilinx® FPGAs

Directory of Open Access Journals (Sweden)

Rikus le Roux

2015-07-01

Full Text Available Despite the advantages dynamic reconfiguration adds to a system, it only improves system performance if the execution time exceeds the configuration time. As a result, dynamic reconfiguration is only capable of improving the performance of quasi-static applications. In order to improve the performance of dynamic applications, researchers focus on improving the reconfiguration throughput. These approaches are mostly limited by the bus commonly used to connect the configuration controller to the memory, which contributes to the configuration time. A method proposed to ameliorate this overhead is an architecture utilizing localised block RAM (BRAM connected to the configuration controller to store the configuration bitstream. The aim of this paper is to illustrate the advantages of the proposed architecture, especially for reconfiguring real-time applications. This is done by validating the throughput of the architecture and comparing this to the maximum theoretical throughput of the internal configuration access port (ICAP. It was found that the proposed architecture is capable of reconfiguring an application within a time-frame suitable for real-time reconfiguration. The drawback of this method is that the BRAM is extremely limited and only a discrete set of configurations can be stored. This paper also proposes a method on how this can be mitigated without affecting the throughput.

Design and Evaluation of a Reconfigurable Manufacturing System

DEFF Research Database (Denmark)

Zhang, Shuai; Li, Yang; Bilberg, Arne

2014-01-01

In modern manufacturing industry, reconfigurable manufacturing system (RMS) is a promising concept in the research arena. A new RMS system structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to improve its production efficiency. This article shows...... implemented in this consumer goods manufacturer can be effectively (re)configured as part of the daily operations, and the configuration is analyzed by computer simulation before release. Flexibility can be increased considerably meanwhile the system can maintain an acceptable productivity....

A Framework for Hardware-Accelerated Services Using Partially Reconfigurable SoCs

Directory of Open Access Journals (Sweden)

MACHIDON, O. M.

2016-05-01

Full Text Available The current trend towards ?Everything as a Service? fosters a new approach on reconfigurable hardware resources. This innovative, service-oriented approach has the potential of bringing a series of benefits for both reconfigurable and distributed computing fields by favoring a hardware-based acceleration of web services and increasing service performance. This paper proposes a framework for accelerating web services by offloading the compute-intensive tasks to reconfigurable System-on-Chip (SoC devices, as integrated IP (Intellectual Property cores. The framework provides a scalable, dynamic management of the tasks and hardware processing cores, based on dynamic partial reconfiguration of the SoC. We have enhanced security of the entire system by making use of the built-in detection features of the hardware device and also by implementing active counter-measures that protect the sensitive data.

Design of reconfigurable logic controllers

CERN Document Server

Bukowiec, Arkadiusz; Doligalski, Michał; Tkacz, Jacek

2016-01-01

This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the recon...

Reconfigurable engineered motile semiconductor microparticles.

Science.gov (United States)

Ohiri, Ugonna; Shields, C Wyatt; Han, Koohee; Tyler, Talmage; Velev, Orlin D; Jokerst, Nan

2018-05-03

Locally energized particles form the basis for emerging classes of active matter. The design of active particles has led to their controlled locomotion and assembly. The next generation of particles should demonstrate robust control over their active assembly, disassembly, and reconfiguration. Here we introduce a class of semiconductor microparticles that can be comprehensively designed (in size, shape, electric polarizability, and patterned coatings) using standard microfabrication tools. These custom silicon particles draw energy from external electric fields to actively propel, while interacting hydrodynamically, and sequentially assemble and disassemble on demand. We show that a number of electrokinetic effects, such as dielectrophoresis, induced charge electrophoresis, and diode propulsion, can selectively power the microparticle motions and interactions. The ability to achieve on-demand locomotion, tractable fluid flows, synchronized motility, and reversible assembly using engineered silicon microparticles may enable advanced applications that include remotely powered microsensors, artificial muscles, reconfigurable neural networks and computational systems.

Functional verification of dynamically reconfigurable FPGA-based systems

CERN Document Server

Gong, Lingkan

2015-01-01

This book analyzes the challenges in verifying Dynamically Reconfigurable Systems (DRS) with respect to the user design and the physical implementation of such systems. The authors describe the use of a simulation-only layer to emulate the behavior of target FPGAs and accurately model the characteristic features of reconfiguration. Readers are enabled with this simulation-only layer to maintain verification productivity by abstracting away the physical details of the FPGA fabric.  Two implementations of the simulation-only layer are included: Extended ReChannel is a SystemC library that can be used to check DRS designs at a high level; ReSim is a library to support RTL simulation of a DRS reconfiguring both its logic and state. Through a number of case studies, the authors demonstrate how their approach integrates seamlessly with existing, mainstream DRS design flows and with well-established verification methodologies such as top-down modeling and coverage-driven verification. Provides researchers with an i...

Reconfigurable Wave Velocity Transmission Lines for Phased Arrays

Science.gov (United States)

Host, Nick; Chen, Chi-Chih; Volakis, John L.; Miranda, Felix

2013-01-01

Phased array antennas showcase many advantages over mechanically steered systems. However, they are also more complex, heavy and most importantly costly. This presentation paper presents a concept which overcomes these detrimental attributes by eliminating all of the phase array backend (including phase shifters). Instead, a wave velocity reconfigurable transmission line is used in a series fed array arrangement to allow phase shifting with one small (100mil) mechanical motion. Different configurations of the reconfigurable wave velocity transmission line are discussed and simulated and experimental results are presented.

Design of low-power coarse-grained reconfigurable architectures

CERN Document Server

Kim, Yoonjin

2010-01-01

Coarse-grained reconfigurable architecture (CGRA) has emerged as a solution for flexible, application-specific optimization of embedded systems. Helping you understand the issues involved in designing and constructing embedded systems, Design of Low-Power Coarse-Grained Reconfigurable Architectures offers new frameworks for optimizing the architecture of components in embedded systems in order to decrease area and save power. Real application benchmarks and gate-level simulations substantiate these frameworks.The first half of the book explains how to reduce power in the configuration cache. T

Distributed sensor and actuator reconfiguration for fault-tolerant networked control systems

NARCIS (Netherlands)

Herdeiro Teixeira, A.M.; Araujo, Jose; Sandberg, Henrik; Johansson, Karl H.

2017-01-01

In this paper, we address the problem of distributed reconfiguration of networked control systems upon the removal of misbehaving sensors and actuators. In particular, we consider systems with redundant sensors and actuators cooperating to recover from faults. Reconfiguration is performed while

Reconfigurable vision system for real-time applications

Science.gov (United States)

Torres-Huitzil, Cesar; Arias-Estrada, Miguel

2002-03-01

Recently, a growing community of researchers has used reconfigurable systems to solve computationally intensive problems. Reconfigurability provides optimized processors for systems on chip designs, and makes easy to import technology to a new system through reusable modules. The main objective of this work is the investigation of a reconfigurable computer system targeted for computer vision and real-time applications. The system is intended to circumvent the inherent computational load of most window-based computer vision algorithms. It aims to build a system for such tasks by providing an FPGA-based hardware architecture for task specific vision applications with enough processing power, using the minimum amount of hardware resources as possible, and a mechanism for building systems using this architecture. Regarding the software part of the system, a library of pre-designed and general-purpose modules that implement common window-based computer vision operations is being investigated. A common generic interface is established for these modules in order to define hardware/software components. These components can be interconnected to develop more complex applications, providing an efficient mechanism for transferring image and result data among modules. Some preliminary results are presented and discussed.

A novel approach to gait synchronization and transition for reconfigurable walking platforms

Directory of Open Access Journals (Sweden)

Shunsuke Nansai

2015-04-01

Full Text Available Legged robots based on one degree-of-freedom reconfigurable planar leg mechanisms, that are capable of generating multiple useful gaits, are highly desired due to the possibility of handling environments and tasks of high complexity while maintaining simple control schemes. An essential consideration in these reconfigurable legged robots is to attain stability in motion, at rest as well as while transforming from one configuration to another with the minimum number of legs as long as the full range of their walking patterns, resulting from the different gait cycles of their legs, is achieved. To this end, in this paper, we present a method for the generation of input joint trajectories to properly synchronize the movement of quadruped robots with reconfigurable legs. The approach is exemplified in a four-legged robot with reconfigurable Jansen legs capable of generating up to six useful different gait cycles. The proposed technique is validated through simulated results that show the platform׳s stability across its six feasible walking patterns and during gait transition phases, thus considerably extending the capabilities of the non-reconfigurable design.

Socio-spatial gender relations and women’s participation in the Maize Merged with Fruit Trees Project in Chiapas

Directory of Open Access Journals (Sweden)

Arli Juárez Paulín

2018-06-01

Full Text Available This article analyzes from a spatial and gender perspective the experience of the “Maize Merged with Fruit Trees” project in Chiapas, Mexico. Its objective is to make visible the ways in which gender relations materialize in space and are translated into opportunities and/or socio-territorial boundaries for women’s participation in production support programs. A qualitative methodology was used that included: participant observation, interviews, participatory workshops and participatory mapping. The results show the duality of processes that women face as a consequence of their incorporation into the project, as while they question and renegotiate their gendered situations, they also face subordination associated with the superficial role for women reproduced within the same organizational dynamic.

Femtosecond optical injection of intact plant cells using a reconfigurable platform

Science.gov (United States)

Mitchell, Claire A.; Kalies, Stefan; Cizmar, Tomas; Bellini, Nicola; Kubasik-Thayil, Anisha; Heisterkamp, Alexander; Torrance, Lesley; Roberts, Alison G.; Gunn-Moore, Frank J.; Dholakia, Kishan

2014-03-01

The use of ultrashort-pulsed lasers for molecule delivery and transfection has proved to be a non-invasive and highly efficient technique for a wide range of mammalian cells. This present study investigates the effectiveness of femtosecond photoporation in plant cells, a hard-to-manipulate yet agriculturally relevant cell type, specifically suspension tobacco BY-2 cells. Both spatial and temporal shaping of the light field is employed to optimise the delivery of membrane impermeable molecules into plant cells using a reconfigurable optical system designed to be able to switch easily between different spatial modes and pulse durations. The use of a propagation invariant Bessel beam was found to increase the number of cells that could be viably optoinjected, when compared to the use of a Gaussian beam. Photoporation with a laser producing sub-12 fs pulses, coupled with a dispersion compensation system to retain the pulse duration at focus, reduced the power required for efficient optical injection by 1.5-1.8 times when compared to a photoporation with a 140 fs laser output.

Development of reconfigurable analog and digital circuits for plasma diagnostics measurement systems

International Nuclear Information System (INIS)

Srivastava, Amit Kumar; Sharma, Atish; Raval, Tushar

2009-01-01

In long pulse discharge tokamak, a large number of diagnostic channels are being used to understand the complex behavior of plasma. Different diagnostics demand different types of analog and digital processing for plasma parameters measurement. This leads to variable requirements of signal processing for diagnostic measurement. For such types of requirements, we have developed hardware with reconfigurable electronic devices, which provide flexible solution for rapid development of measurement system. Here the analog processing is achieved by Field Programmable Analog Array (FPAA) integrated circuit while reconfigurable digital devices (CPLD/FPGA) achieve digital processing. FPAA's provide an ideal integrated platform for implementing low to medium complexity analog signal processing. With dynamic reconfigurability, the functionality of the FPAA can be reconfigured in-system by the designer or on the fly by a microprocessor. This feature is quite useful to manipulate the tuning or the construction of any part of the analog circuit without interrupting operation of the FPAA, thus maintaining system integrity. The hardware operation control logic circuits are configured in the reconfigurable digital devices (CPLD/FPGA) to control proper hardware functioning. These reconfigurable devices provide the design flexibility and save the component space on the board. It also provides the flexibility for various setting through software. The circuit controlling commands are either issued by computer/processor or generated by circuit itself. (author)

Reconfigurable dual-band metamaterial antenna based on liquid crystals

Science.gov (United States)

Che, Bang-Jun; Meng, Fan-Yi; Lyu, Yue-Long; Wu, Qun

2018-05-01

In this paper, a novel reconfigurable dual-band metamaterial antenna with a continuous beam that is electrically steered in backward to forward directions is first proposed by employing a liquid crystal (LC)-loaded tunable extended composite right-/left-handed (E-CRLH) transmission line (TL). The frequency-dependent property of the E-CRLH TL is analyzed and a compact unit cell based on the nematic LC is proposed to realize the tunable dual band characteristics. The phase constant of the proposed unit cell can be dynamically continuously tuned from negative to positive values in two operating bands by changing the bias voltage of the loaded LC material. A resulting dual band fixed-frequency beam steering property has been predicted by numerical simulations and experimentally verified. The measured results show that the fabricated reconfigurable antenna features an electrically controlled continuous beam steering from backward  ‑16° to forward  +13° at 7.2 GHz and backward  ‑9° to forward  +17° at 9.4 GHz, respectively. This electrically controlled beam steering range turns out to be competitive with the previously reported single band reconfigurable antennas. Besides, the measured and simulated results of the proposed reconfigurable dual-band metamaterial antenna are in good agreement.

Reconfigurable Radio Access Unit for DWDM to W-Band Wireless Conversion

DEFF Research Database (Denmark)

Chorchos, Łukasz; Rommel, Simon; Turkiewicz, Jarosław P.

2017-01-01

In this letter a reconfigurable Remote Access Unit (RAU) is proposed and demonstrated, interfacing dense wavelength division multiplexed (DWDM) optical and W-band wireless links. The RAU is composed of a tunable local oscillator, a narrow optical filter and a control unit, making it reconfigurable...

Experiencing a Problem-Based Learning Approach for Teaching Reconfigurable Architecture Design

Directory of Open Access Journals (Sweden)

Erwan Fabiani

2009-01-01

Full Text Available This paper presents the “reconfigurable computing” teaching part of a computer science master course (first year on parallel architectures. The practical work sessions of this course rely on active pedagogy using problem-based learning, focused on designing a reconfigurable architecture for the implementation of an application class of image processing algorithms. We show how the successive steps of this project permit the student to experiment with several fundamental concepts of reconfigurable computing at different levels. Specific experiments include exploitation of architectural parallelism, dataflow and communicating component-based design, and configurability-specificity tradeoffs.

Analysis of initial prestress force of spatial tendon prestressed concrete containment structures

International Nuclear Information System (INIS)

Shiau, H.-S.

1975-01-01

A theoretical investigation is presented of the initial stage of prestressed tendon and prestressed concrete before and after jacking force of tendon anchorage released. A method is developed that is applicable to any kind of spatial tendon considering frictional loss due to length and curvature effects. A triple integral equation of one independent variable and jacking force is derived to represent an exact solution of tendon force along the whole tendon which may have reverse curvatures. In order to analyze the stress response of concrete due to this prestress force by using existing finite element computer program or any other kind of computer program, a systematic method is suggested to obtain tendon force components, which are represented by a series of equations of one independent variable, in any coordinate system as external force applied on the concrete. The resulting systems of the equations are then solved by numerical mathematic and computer techniques. Two numerical examples are represented. The first example is, dome prestress analysis of containment building by the proposed method and Kalnins' computer program for shell of revolution. Results are discussed. The second example is picked from prestress analysis for personnel air lock of containment building by using proposed method and FELAP finite element Computer program. It includes two different tendon arrangements around the opening. The results of these two different arrangements are compared and discussed

An Embedded Reconfigurable Logic Module

Science.gov (United States)

Tucker, Jerry H.; Klenke, Robert H.; Shams, Qamar A. (Technical Monitor)

2002-01-01

A Miniature Embedded Reconfigurable Computer and Logic (MERCAL) module has been developed and verified. MERCAL was designed to be a general-purpose, universal module that that can provide significant hardware and software resources to meet the requirements of many of today's complex embedded applications. This is accomplished in the MERCAL module by combining a sub credit card size PC in a DIMM form factor with a XILINX Spartan I1 FPGA. The PC has the ability to download program files to the FPGA to configure it for different hardware functions and to transfer data to and from the FPGA via the PC's ISA bus during run time. The MERCAL module combines, in a compact package, the computational power of a 133 MHz PC with up to 150,000 gate equivalents of digital logic that can be reconfigured by software. The general architecture and functionality of the MERCAL hardware and system software are described.

Reconfigurable remote access unit for W-band Radio-over-Fiber transmission

DEFF Research Database (Denmark)

Chorchos, Łukasz; Rommel, Simon; Turkiewicz, Jarosław P.

2016-01-01

There is a growing demand for cost-effective radio over fibre transmission techniques. In this paper, we propose and realize the reconfigurable remote access unit for radio-over-fiber transmission. The reconfigurable unit is build from the tunable filter and laser as well as remote controller...

Materials challenges for repeatable RF wireless device reconfiguration with microfluidic channels

Science.gov (United States)

Griffin, Anthony S.; Sottos, Nancy R.; White, Scott R.

2018-03-01

Recently, adaptive wireless devices have utilized displacement of EGaIn within microchannels as an electrical switching mechanism to enable reconfigurable electronics. Device reconfiguration using EGaIn in microchannels overcomes many challenges encountered by more traditional reconfiguration mechanisms such as diodes and microelectromechanical systems (MEMS). Reconfiguration using EGaIn is severely limited by undesired permanent shorting due to retention of the liquid in microchannels caused by wetting and rapid oxide skin formation. Here, we investigate the conditions which prevent repeatable electrical switching using EGaIn in microchannels. Initial contact angle tests of EGaIn on epoxy surfaces demonstrate the wettability of EGaIn on flat surfaces. SEM cross-sections of microchannels reveal adhesion of EGaIn residue to channel walls. Micro-computed tomography (microCT) scans of provide volumetric measurements of EGaIn remaining inside channels after flow cycling. Non-wetting coatings are proposed as materials based strategy to overcome these issues in future work.

THE INFLUENCE OF SPATIAL RESOLUTION ON NONLINEAR FORCE-FREE MODELING

Energy Technology Data Exchange (ETDEWEB)

DeRosa, M. L.; Schrijver, C. J. [Lockheed Martin Solar and Astrophysics Laboratory, 3251 Hanover St. B/252, Palo Alto, CA 94304 (United States); Wheatland, M. S.; Gilchrist, S. A. [Sydney Institute for Astronomy, School of Physics, The University of Sydney, Sydney, NSW 2006 (Australia); Leka, K. D.; Barnes, G. [NorthWest Research Associates, 3380 Mitchell Ln., Boulder, CO 80301 (United States); Amari, T.; Canou, A. [CNRS, Centre de Physique Théorique de l’École Polytechnique, F-91128, Palaiseau Cedex (France); Thalmann, J. K. [Institute of Physics/IGAM, University of Graz, Universitätsplatz 5, A-8010 Graz (Austria); Valori, G. [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey, RH5 6NT (United Kingdom); Wiegelmann, T. [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077, Göttingen (Germany); Malanushenko, A. [Department of Physics, Montana State University, Bozeman, MT 59717 (United States); Sun, X. [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305 (United States); Régnier, S. [Department of Mathematics and Information Sciences, Faculty of Engineering and Environment, Northumbria University, Newcastle-Upon-Tyne, NE1 8ST (United Kingdom)

2015-10-01

The nonlinear force-free field (NLFFF) model is often used to describe the solar coronal magnetic field, however a series of earlier studies revealed difficulties in the numerical solution of the model in application to photospheric boundary data. We investigate the sensitivity of the modeling to the spatial resolution of the boundary data, by applying multiple codes that numerically solve the NLFFF model to a sequence of vector magnetogram data at different resolutions, prepared from a single Hinode/Solar Optical Telescope Spectro-Polarimeter scan of NOAA Active Region 10978 on 2007 December 13. We analyze the resulting energies and relative magnetic helicities, employ a Helmholtz decomposition to characterize divergence errors, and quantify changes made by the codes to the vector magnetogram boundary data in order to be compatible with the force-free model. This study shows that NLFFF modeling results depend quantitatively on the spatial resolution of the input boundary data, and that using more highly resolved boundary data yields more self-consistent results. The free energies of the resulting solutions generally trend higher with increasing resolution, while relative magnetic helicity values vary significantly between resolutions for all methods. All methods require changing the horizontal components, and for some methods also the vertical components, of the vector magnetogram boundary field in excess of nominal uncertainties in the data. The solutions produced by the various methods are significantly different at each resolution level. We continue to recommend verifying agreement between the modeled field lines and corresponding coronal loop images before any NLFFF model is used in a scientific setting.

Reconfigurable multiport EPON repeater

Science.gov (United States)

Oishi, Masayuki; Inohara, Ryo; Agata, Akira; Horiuchi, Yukio

2009-11-01

An extended reach EPON repeater is one of the solutions to effectively expand FTTH service areas. In this paper, we propose a reconfigurable multi-port EPON repeater for effective accommodation of multiple ODNs with a single OLT line card. The proposed repeater, which has multi-ports in both OLT and ODN sides, consists of TRs, BTRs with the CDR function and a reconfigurable electrical matrix switch, can accommodate multiple ODNs to a single OLT line card by controlling the connection of the matrix switch. Although conventional EPON repeaters require full OLT line cards to accommodate subscribers from the initial installation stage, the proposed repeater can dramatically reduce the number of required line cards especially when the number of subscribers is less than a half of the maximum registerable users per OLT. Numerical calculation results show that the extended reach EPON system with the proposed EPON repeater can save 17.5% of the initial installation cost compared with a conventional repeater, and can be less expensive than conventional systems up to the maximum subscribers especially when the percentage of ODNs in lightly-populated areas is higher.

The use of geographical information systems in socio-economic studies

OpenAIRE

Daplyn, P.; Cropley, J.; Treagust, S.; Gordon, A.

1994-01-01

Geographical information systems (GIS) have found wide and growing applications, as digital remote-sensing data and computer technology have become more sophisticated, more easily available and less expensive. NRI recently undertook preliminary research into potential socio-economic applications of GIS. The feasibility of utilizing spatial data, available in GIS, to model socio-economic relationships was examined. It included the following steps: (a) identification of hypothetical relationshi...

A game-theoretic formulation of the homogeneous self-reconfiguration problem

KAUST Repository

Pickem, Daniel; Egerstedt, Magnus; Shamma, Jeff S.

2015-01-01

In this paper we formulate the homogeneous two- and three-dimensional self-reconfiguration problem over discrete grids as a constrained potential game. We develop a game-theoretic learning algorithm based on the Metropolis-Hastings algorithm that solves the self-reconfiguration problem in a globally optimal fashion. Both a centralized and a fully decentralized algorithm are presented and we show that the only stochastically stable state is the potential function maximizer, i.e. the desired target configuration. These algorithms compute transition probabilities in such a way that even though each agent acts in a self-interested way, the overall collective goal of self-reconfiguration is achieved. Simulation results confirm the feasibility of our approach and show convergence to desired target configurations.

A game-theoretic formulation of the homogeneous self-reconfiguration problem

KAUST Repository

Pickem, Daniel

2015-12-15

In this paper we formulate the homogeneous two- and three-dimensional self-reconfiguration problem over discrete grids as a constrained potential game. We develop a game-theoretic learning algorithm based on the Metropolis-Hastings algorithm that solves the self-reconfiguration problem in a globally optimal fashion. Both a centralized and a fully decentralized algorithm are presented and we show that the only stochastically stable state is the potential function maximizer, i.e. the desired target configuration. These algorithms compute transition probabilities in such a way that even though each agent acts in a self-interested way, the overall collective goal of self-reconfiguration is achieved. Simulation results confirm the feasibility of our approach and show convergence to desired target configurations.

Design and Fabrication of a Reconfigurable MEMS-Based Antenna

KAUST Repository

Martinez, Miguel Angel Galicia

2011-06-22

This thesis presents the design and fabrication of a customized in house Micro-Electro-Mechanical-Systems (MEMS) process based on-chip antenna that is both frequency and polarization reconfigurable. It is designed to work at both 60 GHz and 77 GHz through MEMS switches. This antenna can also work in both horizontal and vertical linear polarizations by utilizing a moveable plate. The design is intended for Wireless Personal Area Networks (WPAN) and automotive radar applications. Typical on-chip antennas are inefficient and difficult to reconfigure. Therefore, the focus of this work is to develop an efficient on-chip antenna solution, which is reconfigurable in frequency and in polarization. A fractal bowtie antenna is employed for this thesis, which achieves frequency reconfigurability through MEMS switches. The design is simulated in industry standard Electromagnetic (EM) simulator Ansoft HFSS. A novel concept for horizontal to vertical linear polarization agility is introduced which incorporates a moveable polymer plate. For this work, a microprobe is used to move the plate from the horizontal to vertical position. For testing purposes, a novel mechanism has been designed in order to feed the antenna with RF-probes in both horizontal and vertical positions. A simulated gain of approximately 0 dB is achieved at both target frequencies (60 and 77 GHz), in both horizontal and vertical positions. In all the cases mentioned above (both frequencies and positions), the antenna is well matched (< -10 dB) to the 50 Ω system impedance. Similarly, the radiation nulls are successfully shifted by changing the position of the antenna from horizontal to vertical. The complete design and fabrication of the reconfigurable MEMS antenna has been done at KAUST facilities. Some challenges have been encountered during its realization due to the immaturity of the customized MEMS fabrication process. Nonetheless, a first fabrication attempt has highlighted such shortcomings. According

A reconfigurable strategy for distributed digital process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1990-01-01

A reconfigurable control scheme is proposed which, unlike a preprogrammed one, uses stochastic automata to learn the current operating status of the environment (i.e., the plant, controller, and communication network) by dynamically monitoring the system performance and then switching to the appropriate controller on the basis of these observations. The potential applicability of this reconfigurable control scheme to electric power plants is being investigated. The plant under consideration is the Experimental Breeder Reactor (EBR-II) at the Argonne National Laboratory site in Idaho. The distributed control system is emulated on a ring network where the individual subsystems are hosted as follows: (1) the reconfigurable control modules are located in one of the network modules called Multifunction Controller; (2) the learning modules are resident in a VAX 11/785 mainframe computer; and (3) a detailed model of the plant under control is executed in the same mainframe. This configuration is a true representation of the network-based control system in the sense that it operates in real time and is capable of interacting with the actual plant

Analysis of Reconfigured Control Loop with a Virtual Actuator

Directory of Open Access Journals (Sweden)

Anna Filasova

2011-01-01

Full Text Available Control reconfiguration changes the control structure in response to a fault detected in the plant. This becomes necessary, because a major fault like loss of an actuator breaks the corresponding control loop and therefore renders the whole system inoperable.  An important aim of control reconfiguration is to change the control structure as little as possible, since every change bears the potential of practical problems. The proposed solution is to keep the original controller in the loop and to add an extension called virtual actuator that implements the necessary changes of the control structure. The virtual actuator translates between the signals of the nominal controller and the signal of the faulty plants. This paper is concerned with the analysis of reconfigured loop with a virtual actuator for the system with the faulty actuator. The proposed analysis is illustrated on numerical example.

A Method for Design of Modular Reconfigurable Machine Tools

Directory of Open Access Journals (Sweden)

Zhengyi Xu

2017-02-01

Full Text Available Presented in this paper is a method for the design of modular reconfigurable machine tools (MRMTs. An MRMT is capable of using a minimal number of modules through reconfiguration to perform the required machining tasks for a family of parts. The proposed method consists of three steps: module identification, module determination, and layout synthesis. In the first step, the module components are collected from a family of general-purpose machines to establish a module library. In the second step, for a given family of parts to be machined, a set of needed modules are selected from the module library to construct a desired reconfigurable machine tool. In the third step, a final machine layout is decided though evaluation by considering a number of performance indices. Based on this method, a software package has been developed that can design an MRMT for a given part family.

ALI (Autonomous Lunar Investigator): Revolutionary Approach to Exploring the Moon with Addressable Reconfigurable Technology

Science.gov (United States)

Clark, P. E.; Curtis, S. A.; Rilee, M. L.; Floyd, S. R.

2005-01-01

Addressable Reconfigurable Technology (ART) based structures: Mission Concepts based on Addressable Reconfigurable Technology (ART), originally studied for future ANTS (Autonomous Nanotechnology Swarm) Space Architectures, are now being developed as rovers for nearer term use in lunar and planetary surface exploration. The architecture is based on the reconfigurable tetrahedron as a building block. Tetrahedra are combined to form space-filling networks, shaped for the required function. Basic structural components are highly modular, addressable arrays of robust nodes (tetrahedral apices) from which highly reconfigurable struts (tetrahedral edges), acting as supports or tethers, are efficiently reversibly deployed/stowed, transforming and reshaping the structures as required.

Multi-mode sensor processing on a dynamically reconfigurable massively parallel processor array

Science.gov (United States)

Chen, Paul; Butts, Mike; Budlong, Brad; Wasson, Paul

2008-04-01

This paper introduces a novel computing architecture that can be reconfigured in real time to adapt on demand to multi-mode sensor platforms' dynamic computational and functional requirements. This 1 teraOPS reconfigurable Massively Parallel Processor Array (MPPA) has 336 32-bit processors. The programmable 32-bit communication fabric provides streamlined inter-processor connections with deterministically high performance. Software programmability, scalability, ease of use, and fast reconfiguration time (ranging from microseconds to milliseconds) are the most significant advantages over FPGAs and DSPs. This paper introduces the MPPA architecture, its programming model, and methods of reconfigurability. An MPPA platform for reconfigurable computing is based on a structural object programming model. Objects are software programs running concurrently on hundreds of 32-bit RISC processors and memories. They exchange data and control through a network of self-synchronizing channels. A common application design pattern on this platform, called a work farm, is a parallel set of worker objects, with one input and one output stream. Statically configured work farms with homogeneous and heterogeneous sets of workers have been used in video compression and decompression, network processing, and graphics applications.

Reconfiguration in FPGA-Based Multi-Core Platforms for Hard Real-Time Applications

DEFF Research Database (Denmark)

Pezzarossa, Luca; Schoeberl, Martin; Sparsø, Jens

2016-01-01

-case execution-time of tasks of an application that determines the systems ability to respond in time. To support this focus, the platform must provide service guarantees for both communication and computation resources. In addition, many hard real-time applications have multiple modes of operation, and each......In general-purpose computing multi-core platforms, hardware accelerators and reconfiguration are means to improve performance; i.e., the average-case execution time of a software application. In hard real-time systems, such average-case speed-up is not in itself relevant - it is the worst...... mode has specific requirements. An interesting perspective on reconfigurable computing is to exploit run-time reconfiguration to support mode changes. In this paper we explore approaches to reconfiguration of communication and computation resources in the T-CREST hard real-time multi-core platform...

A Controller for Dynamic Partial Reconfiguration in FPGA-Based Real-Time Systems

DEFF Research Database (Denmark)

Pezzarossa, Luca; Schoeberl, Martin; Sparsø, Jens

2017-01-01

-source DPR controller specially developed for hard real-time systems and prototyped in connection with the open-source multi-core platform for real-time applications T-CREST. The controller enables a processor to perform reconfiguration in a time-predictable manner and supports different operating modes......In real-time systems, the use of hardware accelerators can lead to a worst-case execution-time speed-up, to a simplification of its analysis, and to a reduction of its pessimism. When using FPGA technology, dynamic partial reconfiguration (DPR) can be used to minimize the area, by only loading....... The paper also presents a software tool for bitstream conversion, compression, and for reconfiguration time analysis. The DPR controller is evaluated in terms of hardware cost, operating frequency, speed, and bitstream compression ratio vs. reconfiguration time trade-off. A simple application example...

Directed transport in a periodic tube driven by asymmetric unbiased forces coexisting with spatially modulated noises

International Nuclear Information System (INIS)

Li Fengguo; Ai Baoquan

2011-01-01

Graphical abstract: The current J as a function of the phase shift φ and ε at a = 1/2π, b = 0.5/2π, k B T = 0.5, α = 0.1, and F 0 = 0.5. Highlights: → Unbiased forces and spatially modulated white noises affect the current. → In the adiabatic limit, the analytical expression of directed current is obtained. → Their competition will induce current reversals. → For negative asymmetric parameters of the force, there exists an optimum parameter. → The current increases monotonously for positive asymmetric parameters. - Abstract: Transport of Brownian particles in a symmetrically periodic tube is investigated in the presence of asymmetric unbiased external forces and spatially modulated Gaussian white noises. In the adiabatic limit, we obtain the analytical expression of the directed current. It is found that the temporal asymmetry can break thermodynamic equilibrium and induce a net current. Their competition between the temporal asymmetry force and the phase shift between the noise modulation and the tube shape will induce some peculiar phenomena, for example, current reversals. The current changes with the phase shift in the form of the sine function. For negative asymmetric parameters of the force, there exists an optimum parameter at which the current takes its maximum value. However, the current increases monotonously for positive asymmetric parameters.

Origami tubes with reconfigurable polygonal cross-sections.

Science.gov (United States)

Filipov, E T; Paulino, G H; Tachi, T

2016-01-01

Thin sheets can be assembled into origami tubes to create a variety of deployable, reconfigurable and mechanistically unique three-dimensional structures. We introduce and explore origami tubes with polygonal, translational symmetric cross-sections that can reconfigure into numerous geometries. The tubular structures satisfy the mathematical definitions for flat and rigid foldability, meaning that they can fully unfold from a flattened state with deformations occurring only at the fold lines. The tubes do not need to be straight and can be constructed to follow a non-linear curved line when deployed. The cross-section and kinematics of the tubular structures can be reprogrammed by changing the direction of folding at some folds. We discuss the variety of tubular structures that can be conceived and we show limitations that govern the geometric design. We quantify the global stiffness of the origami tubes through eigenvalue and structural analyses and highlight the mechanical characteristics of these systems. The two-scale nature of this work indicates that, from a local viewpoint, the cross-sections of the polygonal tubes are reconfigurable while, from a global viewpoint, deployable tubes of desired shapes are achieved. This class of tubes has potential applications ranging from pipes and micro-robotics to deployable architecture in buildings.

Origami tubes with reconfigurable polygonal cross-sections

Science.gov (United States)

Filipov, E. T.; Paulino, G. H.; Tachi, T.

2016-01-01

Thin sheets can be assembled into origami tubes to create a variety of deployable, reconfigurable and mechanistically unique three-dimensional structures. We introduce and explore origami tubes with polygonal, translational symmetric cross-sections that can reconfigure into numerous geometries. The tubular structures satisfy the mathematical definitions for flat and rigid foldability, meaning that they can fully unfold from a flattened state with deformations occurring only at the fold lines. The tubes do not need to be straight and can be constructed to follow a non-linear curved line when deployed. The cross-section and kinematics of the tubular structures can be reprogrammed by changing the direction of folding at some folds. We discuss the variety of tubular structures that can be conceived and we show limitations that govern the geometric design. We quantify the global stiffness of the origami tubes through eigenvalue and structural analyses and highlight the mechanical characteristics of these systems. The two-scale nature of this work indicates that, from a local viewpoint, the cross-sections of the polygonal tubes are reconfigurable while, from a global viewpoint, deployable tubes of desired shapes are achieved. This class of tubes has potential applications ranging from pipes and micro-robotics to deployable architecture in buildings. PMID:26997894

Liquid metal-based reconfigurable and stretchable photolithography

International Nuclear Information System (INIS)

Kim, Daeyoung; Yoo, Jun Hyeon; Lee, Jeong-Bong

2016-01-01

Conventional ultraviolet (UV) lithography typically uses a photomask made of a fused silica plate covered with a layer of UV opaque material such as chromium. The photomask has passive binary patterns of UV opaque and UV transparent regions and the pattern is unalterable. We report a novel real-time dynamically reconfigurable photomask technology using a liquid metal (as a UV opaque material) filled in polydimethylsiloxane (PDMS, as a UV transparent material) microfluidic channels. We found that the gallium-based liquid metal (e.g. Galinstan ® ) is opaque in broad spectrum of light in the wavelength from 325 nm to 850 nm while the PDMS is highly transparent in this wide range of spectrum. We made both bright field and dark field microfluidic photomasks and transferred various patterns onto a positive photoresist. A 7-segment display microfluidic channel photomask was also fabricated and decimal numerals (from ‘0’ to ‘9’) were patterned with one photomask by dynamically reconfiguring decimal numeral shapes with on-demand injection and withdrawal of the liquid metal in specific segment microfluidic channels in the photomask. In addition, utilizing mechanical flexibility of the PDMS and the liquid metal, reconfiguration of the patterns in a microfluidic photomask under stretching was successfully tested. (paper)

Repetition or Reconfiguration

DEFF Research Database (Denmark)

Andersen, Kristina Vaarst

, the cognitive quality of knowledge held by individual professionals is the key microfoundation for project level performance. This paper empirically tests effects of project participants with and without knowledge diversity for project level performance for projects aiming for varying degrees of repetition...... and reconfiguration. The results indicate that project performance benefits form contributions from individuals holding diverse knowledge only when projects aim for high differentiation levels. This positive association is not just moderated, it may even be reversed in the case of professionals participating in low...

Multi-criteria grey relational approach to evaluating reconfigurable manufacturing configurations

OpenAIRE

Rehman, A. U.

2017-01-01

In response to highly dynamic markets, manufacturing industries need alternative feasible manufacturing strategies. The strategy currently adopted is to reconfigure the existing manufacturing system. The conditions to reconfigure existing configurations change from time to time. An attempt is made to identify and apply an approach to evaluate these configurations. The paper proposes a grey relational decision-making approach. The approach takes into account multiple performance measures. The ...

Housing, Urban Renewal and Socio-Spatial Integration. A Study on Rehabilitating the Former Socialistic Public Housing Areas in Beijing

Directory of Open Access Journals (Sweden)

Xiaoxi Hui

2017-11-01

housing reform further boosted urban renewal, often in the form of wholesale reconstruction and linked to real estate development. The market-driven urban reconstruction resulted in the resident displacement, community destruction, disappearance of historical images and, more threatening, socio-spatial segregation. It encountered the rising criticism from scholars and activists and resistance from the residents. As a result, many housing renewal projects, including the reconstruction projects of former public housing areas, had to be stopped or suspended in Beijing after 2004. Nowadays there is a dilemma for the urban renewal of Beijing’s former public housing areas. On the one hand, its conventional approach became inadaptable in the existing transitional context of China, and thus led to the increasing conflict of interests between different actors (or groups and the tension between individuality and collectivity; but on the other hand, if there will be social-oriented, adapted strategies, urban renewal would still be an effective means to improve the quality of living and to solve the housing problem of the city. Therefore, my study addressed the general research question, “What will be the adapted strategies used for the urban renewal of former socialistic public housing areas in Beijing to improve the local living conditions and to deal with the existing urban housing problem?” As a social-oriented, step-by-step approach to avoid wholesale reconstruction, urban rehabilitation might be an alternative approach for Beijing’s urban renewal. It is the hypothesis of my study. However, here comes the question if this approach, originally developed in the West, can adapt to the Chinese situation. In a transitional society undergoing continuous social diversification and differentiation as well as ethical collision, contemporary Chineseness could refer to the hybridity of ethoses. Facing this super hybrid situation, the adaptability of the Western approach, which was

Reconfigurable Manufacturing System Design and Implementation

DEFF Research Database (Denmark)

Hadar, Ronen; Bilberg, Arne

2013-01-01

is meant primarily to show the physical feasibility of the system and provide a first-look into a real production application of the RMS ideas. The purpose of this paper is to present the design of the manufacturer’s RMS proof of concept, its implementation, and evaluation results.......Reconfigurable Manufacturing Systems (RMS) have been an increasing area of interest in the research arena. However, it seems that current literature is lacking application and implementation cases where RMS are simulated, tested, and evaluated as a feasible manufacturing concept. A Manufacturer...... of Consumer Goods identified the potential of the RMS concept and decided to investigate the concept in a real production installation. The result of this development is a proof of concept of a changeable and reconfigurable assembly and decoration system based on the principles of RMS. This proof of concept...

Numerical and Experimental Study of Optoelectronic Trapping on Iron-Doped Lithium Niobate Substrate

Directory of Open Access Journals (Sweden)

Michela Gazzetto

2016-09-01

Full Text Available Optoelectronic tweezers (OET are a promising technique for the realization of reconfigurable systems suitable to trap and manipulate microparticles. In particular, dielectrophoretic (DEP forces produced by OET represent a valid alternative to micro-fabricated metal electrodes, as strong and spatially reconfigurable electrical fields can be induced in a photoconductive layer by means of light-driven phenomena. In this paper we report, and compare with the experimental data, the results obtained by analyzing the spatial configurations of the DEP-forces produced by a 532 nm laser beam, with Gaussian intensity distribution, impinging on a Fe-doped Lithium Niobate substrate. Furthermore, we also present a promising preliminary result for water-droplets trapping, which could open the way to the application of this technique to biological samples manipulation.

Reconfigurable Patch Antenna Radiations Using Plasma Faraday Shield Effect

OpenAIRE

Barro , Oumar Alassane; Himdi , Mohamed; Lafond , Olivier

2016-01-01

International audience; This letter presents a new reconfigurable antenna associated with a plasma Faraday shield effect. The Faraday shield effect is realized by using a fluorescent lamp. A patch antenna operating at 2.45 GHz is placed inside the lamp. The performance of the reconfigurable system is observed in terms of S11, gain and radiation patterns by simulation and measurement. It is shown that by switching ON the fluorescent lamp, the gain of the antenna decreases and the antenna syste...

A Web-Based Integration Procedure for the Development of Reconfigurable Robotic Work-Cells

Directory of Open Access Journals (Sweden)

Paulo Ferreira

2013-07-01

Full Text Available Concepts related to the development of reconfigurable manufacturing systems (RMS and methodologies to provide the best practices in the processing industry and factory automation, such as system integration and web-based technology, are major issues in designing next-generation manufacturing systems (NGMS. Adaptable and integrable devices are crucial for the success of NGMS. In robotic cells the integration of manufacturing components is essential to accelerate system adaptability. Sensors, control architectures and communication technologies have contributed to achieving further agility in reconfigurable factories. In this work a web-based robotic cell integration procedure is proposed to aid the identification of reconfigurable issues and requirements. This methodology is applied to an industrial robot manipulator to enhance system flexibility towards the development of a reconfigurable robotic platform.

Radiation-hardened optically reconfigurable gate array exploiting holographic memory characteristics

Science.gov (United States)

Seto, Daisaku; Watanabe, Minoru

2015-09-01

In this paper, we present a proposal for a radiation-hardened optically reconfigurable gate array (ORGA). The ORGA is a type of field programmable gate array (FPGA). The ORGA configuration can be executed by the exploitation of holographic memory characteristics even if 20% of the configuration data are damaged. Moreover, the optoelectronic technology enables the high-speed reconfiguration of the programmable gate array. Such a high-speed reconfiguration can increase the radiation tolerance of its programmable gate array to 9.3 × 104 times higher than that of current FPGAs. Through experimentation, this study clarified the configuration dependability using the impulse-noise emulation and high-speed configuration capabilities of the ORGA with corrupt configuration contexts. Moreover, the radiation tolerance of the programmable gate array was confirmed theoretically through probabilistic calculation.

SACFIR: SDN-Based Application-Aware Centralized Adaptive Flow Iterative Reconfiguring Routing Protocol for WSNs.

Science.gov (United States)

Aslam, Muhammad; Hu, Xiaopeng; Wang, Fan

2017-12-13

Smart reconfiguration of a dynamic networking environment is offered by the central control of Software-Defined Networking (SDN). Centralized SDN-based management architectures are capable of retrieving global topology intelligence and decoupling the forwarding plane from the control plane. Routing protocols developed for conventional Wireless Sensor Networks (WSNs) utilize limited iterative reconfiguration methods to optimize environmental reporting. However, the challenging networking scenarios of WSNs involve a performance overhead due to constant periodic iterative reconfigurations. In this paper, we propose the SDN-based Application-aware Centralized adaptive Flow Iterative Reconfiguring (SACFIR) routing protocol with the centralized SDN iterative solver controller to maintain the load-balancing between flow reconfigurations and flow allocation cost. The proposed SACFIR's routing protocol offers a unique iterative path-selection algorithm, which initially computes suitable clustering based on residual resources at the control layer and then implements application-aware threshold-based multi-hop report transmissions on the forwarding plane. The operation of the SACFIR algorithm is centrally supervised by the SDN controller residing at the Base Station (BS). This paper extends SACFIR to SDN-based Application-aware Main-value Centralized adaptive Flow Iterative Reconfiguring (SAMCFIR) to establish both proactive and reactive reporting. The SAMCFIR transmission phase enables sensor nodes to trigger direct transmissions for main-value reports, while in the case of SACFIR, all reports follow computed routes. Our SDN-enabled proposed models adjust the reconfiguration period according to the traffic burden on sensor nodes, which results in heterogeneity awareness, load-balancing and application-specific reconfigurations of WSNs. Extensive experimental simulation-based results show that SACFIR and SAMCFIR yield the maximum scalability, network lifetime and stability

SACFIR: SDN-Based Application-Aware Centralized Adaptive Flow Iterative Reconfiguring Routing Protocol for WSNs

Directory of Open Access Journals (Sweden)

Muhammad Aslam

2017-12-01

Full Text Available Smart reconfiguration of a dynamic networking environment is offered by the central control of Software-Defined Networking (SDN. Centralized SDN-based management architectures are capable of retrieving global topology intelligence and decoupling the forwarding plane from the control plane. Routing protocols developed for conventional Wireless Sensor Networks (WSNs utilize limited iterative reconfiguration methods to optimize environmental reporting. However, the challenging networking scenarios of WSNs involve a performance overhead due to constant periodic iterative reconfigurations. In this paper, we propose the SDN-based Application-aware Centralized adaptive Flow Iterative Reconfiguring (SACFIR routing protocol with the centralized SDN iterative solver controller to maintain the load-balancing between flow reconfigurations and flow allocation cost. The proposed SACFIR’s routing protocol offers a unique iterative path-selection algorithm, which initially computes suitable clustering based on residual resources at the control layer and then implements application-aware threshold-based multi-hop report transmissions on the forwarding plane. The operation of the SACFIR algorithm is centrally supervised by the SDN controller residing at the Base Station (BS. This paper extends SACFIR to SDN-based Application-aware Main-value Centralized adaptive Flow Iterative Reconfiguring (SAMCFIR to establish both proactive and reactive reporting. The SAMCFIR transmission phase enables sensor nodes to trigger direct transmissions for main-value reports, while in the case of SACFIR, all reports follow computed routes. Our SDN-enabled proposed models adjust the reconfiguration period according to the traffic burden on sensor nodes, which results in heterogeneity awareness, load-balancing and application-specific reconfigurations of WSNs. Extensive experimental simulation-based results show that SACFIR and SAMCFIR yield the maximum scalability, network lifetime

visões sobre o espaço urbano de Natal/RN

Directory of Open Access Journals (Sweden)

Edna Maria Furtado

2007-01-01

Full Text Available This study aimed at developing a Natal-city spatial "reading", capital of the state of Rio Grande do Norte, and its reconfiguration from the intensification of tourist activity, going through by geography, social sciences and economy, in a matrix approach that ignores the traditional limitations of science and recognizes the complexity around the world today. In light of this understanding, they have been analyzed the socio-economic connections that reform the landscape of Natal under the aegis of the new service-sector economy, led by tourism, in an intense process of city reconfiguration, focusing on three major areas and their irrigating arteries. These changes occur due to the public-private relationship __ via public policies __in the formation of new areas and the reform of old ones of the city, which contributed so that the tourist activity seize it, making it a socio-economic pattern that has obvious effects in its urban mapping.

Reconfigurable control of a power plant deaerator using learning automata

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1991-01-01

A deaerating feedwater heater, equipped with a water level controller and a pressure controller, has been chosen to investigate the feasibility of a reconfigurable control scheme for power plants by incorporating the concept of learning automata. In this paper simulation results based on a model of the Experimental Breeder Reactor (EBR-II) at the Argonne National Laboratory site in Idaho are presented to demonstrate the efficacy of the reconfigurable control scheme

Reconfigurable Multicore Architectures for Streaming Applications

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Kokkeler, Andre B.J.; Rauwerda, G.K.; Jacobs, J.W.M.; Nicolescu, G.; Mosterman, P.J.

2009-01-01

This chapter addresses reconfigurable heterogenous and homogeneous multicore system-on-chip (SoC) platforms for streaming digital signal processing applications, also called DSP applications. In streaming DSP applications, computations can be specified as a data flow graph with streams of data items

The centrifugal and centripetal force influence on spatial competition of agricultural land in Bandung Metropolitan Region

Science.gov (United States)

Sadewo, E.

2017-06-01

Agricultural activity has suffered a massive land functional shift caused by market mechanism in Bandung metropolitan region (BMR). We argue that the existence of agricultural land in urban spatial structure is the result of interaction between centrifugal and centripetal force on spatial competition. This research aims to explore how several recognized centrifugal and centripetal force influence to the existence of agricultural land in BMR land development. The analysis using multivariate regression indicates that there exists spatial competition between population density and degree of urbanization with agricultural land areas. Its extended spatial regression model suggested that neighboring situation plays an important role to preserve agricultural land areas existences in BMR. Meanwhile, the influence of distance between the location of the city center and employment opportunities is found to be insignificant in the spatial competition. It is opposed to the theory of von Thünen and monocentric model in general. One of the possible explanation of such condition is that the assumption of centrality does not met. In addition, the agricultural land density decay in the southern parts of the area was related to its geographical conditions as protected areas or unfavorable for farming activity. It is suggested that BMR was in the early phase of polycentric development. Hence, better policies that lead redirected development to the southern part of the region is needed as well as population control and regulation of land use.

A new method for analysing socio-ecological patterns of vulnerability

OpenAIRE

Kok, M.; Lüdeke, M.; Lucas, P.; Sterzel, T.; Walther, C.; Janssen, P.; Sietz, D.; de Soysa, I.

2016-01-01

This paper presents a method for the analysis of socio-ecological patterns of vulnerability of people being at risk of losing their livelihoods as a consequence of global environmental change. This method fills a gap in methodologies for vulnerability analysis by providing generalizations of the factors that shape vulnerability in specific socio-ecological systems and showing their spatial occurrence. The proposed method consists of four steps that include both quantitative and qualitative an...

ENSEIGNER LES DISPARITÉS SOCIO-SPATIALES AVEC HYPERATLAS: LE CAS DE L’UNION EUROPÉENNE

Directory of Open Access Journals (Sweden)

María Pigaki

2014-12-01

Full Text Available Resumen: En el presente artículo se presentan las posibilidades educativas del programa informático HyperAtlas para enseñar los desequilibrios espaciales que existen a nivel regional, dentro de la Unión Europa. HyperAtlas no sólo constituye una herramienta para desarrollar el pensamiento espacial a partir del análisis espacial. Es además un recurso didáctico a través del cual los alumnos aprenden a ejercer la ciudadanía espacial, a comprender los problemas sociales de carácter territorial y a proponer soluciones. El texto describe los objetivos, metodología y condiciones de experimentación de HyperAtlas en el aulas de Geografía de dos centros de secundaria distintos, uno en Grecia, otro en Francia, se plantean semejanzas y diferencias y se obtienen conclusiones sobre el uso de HyperAtlas como útil de investigación espacial en la escuela. Palabras clave: HyperAtlas, análisis espacial, desequilibrios territoriales, educación para la ciudadanía. Abstract: In this paper the educational possibilities of HyperAtlas computer program are presented to show the spatial imbalances that exist at regional level within the European Union. HyperAtlas is not only a tool to develop spatial thinking from spatial analysis. It is also an educational resource through which students learn to exercise spatial citizenship, to understand the social problems of space and propose solutions. The text describes the objectives, methodology and experimental conditions of HyperAtlas in the classrooms of Geography two different high schools, one in Greece, and one in France. Similarities and differences in both experimentations, and conclusions on the use of HyperAtlas as tool for space research in school are obtained. Key Words: HyperAtlas, spatial analysis, regional disparities, citizenship education. Résumé: Dans cet article, les possibilités éducatives de programme informatique HyperAtlas sont présentés pour montrer les disparités socio-spatiales

Communication-Oriented Design Space Exploration for Reconfigurable Architectures

Directory of Open Access Journals (Sweden)

Gogniat Guy

2007-01-01

Full Text Available Many academic works in computer engineering focus on reconfigurable architectures and associated tools. Fine-grain architectures, field programmable gate arrays (FPGAs, are the most well-known structures of reconfigurable hardware. Dedicated tools (generic or specific allow for the exploration of their design space to choose the best architecture characteristics and/or to explore the application characteristics. The aim is to increase the synergy between the application and the architecture in order to get the best performance. However, there is no generic tool to perform such an exploration for coarse-grain or heterogeneous-grain architectures, just a small number of very specific tools are able to explore a limited set of architectures. To address this major lack, in this paper we propose a new design space exploration approach adapted to fine- and coarse-grain granularities. Our approach combines algorithmic and architecture explorations. It relies on an automatic estimation tool which computes the communication hierarchical distribution and the architectural processing resources use rate for the architecture under exploration. Such an approach forwards the rapid definition of efficient reconfigurable architectures dedicated to one or several applications.

Reconfiguration of Brain Network Architectures between Resting-State and Complexity-Dependent Cognitive Reasoning.

Science.gov (United States)

Hearne, Luke J; Cocchi, Luca; Zalesky, Andrew; Mattingley, Jason B

2017-08-30

Our capacity for higher cognitive reasoning has a measurable limit. This limit is thought to arise from the brain's capacity to flexibly reconfigure interactions between spatially distributed networks. Recent work, however, has suggested that reconfigurations of task-related networks are modest when compared with intrinsic "resting-state" network architecture. Here we combined resting-state and task-driven functional magnetic resonance imaging to examine how flexible, task-specific reconfigurations associated with increasing reasoning demands are integrated within a stable intrinsic brain topology. Human participants (21 males and 28 females) underwent an initial resting-state scan, followed by a cognitive reasoning task involving different levels of complexity, followed by a second resting-state scan. The reasoning task required participants to deduce the identity of a missing element in a 4 × 4 matrix, and item difficulty was scaled parametrically as determined by relational complexity theory. Analyses revealed that external task engagement was characterized by a significant change in functional brain modules. Specifically, resting-state and null-task demand conditions were associated with more segregated brain-network topology, whereas increases in reasoning complexity resulted in merging of resting-state modules. Further increments in task complexity did not change the established modular architecture, but affected selective patterns of connectivity between frontoparietal, subcortical, cingulo-opercular, and default-mode networks. Larger increases in network efficiency within the newly established task modules were associated with higher reasoning accuracy. Our results shed light on the network architectures that underlie external task engagement, and highlight selective changes in brain connectivity supporting increases in task complexity. SIGNIFICANCE STATEMENT Humans have clear limits in their ability to solve complex reasoning problems. It is thought that

Reconfigurable Three-Dimensional Gold Nanorod Plasmonic Nanostructures Organized on DNA Origami Tripod.

Science.gov (United States)

Zhan, Pengfei; Dutta, Palash K; Wang, Pengfei; Song, Gang; Dai, Mingjie; Zhao, Shu-Xia; Wang, Zhen-Gang; Yin, Peng; Zhang, Wei; Ding, Baoquan; Ke, Yonggang

2017-02-28

Distinct electromagnetic properties can emerge from the three-dimensional (3D) configuration of a plasmonic nanostructure. Furthermore, the reconfiguration of a dynamic plasmonic nanostructure, driven by physical or chemical stimuli, may generate a tailored plasmonic response. In this work, we constructed a 3D reconfigurable plasmonic nanostructure with controllable, reversible conformational transformation using bottom-up DNA self-assembly. Three gold nanorods (AuNRs) were positioned onto a reconfigurable DNA origami tripod. The internanorod angle and distance were precisely tuned through operating the origami tripod by toehold-mediated strand displacement. The transduction of conformational change manifested into a controlled shift of the plasmonic resonance peak, which was studied by dark-field microscopy, and agrees well with electrodynamic calculations. This new 3D plasmonic nanostructure not only provides a method to study the plasmonic resonance of AuNRs at prescribed 3D conformations but also demonstrates that DNA origami can serve as a general self-assembly platform for constructing various 3D reconfigurable plasmonic nanostructures with customized optical properties.

Space, race, and poverty: Spatial inequalities in walkable neighborhood amenities?

Directory of Open Access Journals (Sweden)

John Whalen

2012-05-01

Full Text Available BACKGROUND Multiple and varied benefits have been suggested for increased neighborhood walkability. However, spatial inequalities in neighborhood walkability likely exist and may be attributable, in part, to residential segregation. OBJECTIVE Utilizing a spatial demographic perspective, we evaluated potential spatial inequalities in walkable neighborhood amenities across census tracts in Boston, MA (US. METHODS The independent variables included minority racial/ethnic population percentages and percent of families in poverty. Walkable neighborhood amenities were assessed with a composite measure. Spatial autocorrelation in key study variables were first calculated with the Global Moran's I statistic. Then, Spearman correlations between neighborhood socio-demographic characteristics and walkable neighborhood amenities were calculated as well as Spearman correlations accounting for spatial autocorrelation. We fit ordinary least squares (OLS regression and spatial autoregressive models when appropriate as a final step. RESULTS Significant positive spatial autocorrelation was found in neighborhood socio-demographic characteristics (e.g. census tract percent Black, but not walkable neighborhood amenities or in the OLS regression residuals. Spearman correlations between neighborhood socio-demographic characteristics and walkable neighborhood amenities were not statistically significant, nor were neighborhood socio-demographic characteristics significantly associated with walkable neighborhood amenities in OLS regression models. CONCLUSIONS Our results suggest that there is residential segregation in Boston and that spatial inequalities do not necessarily show up using a composite measure. COMMENTS Future research in other geographic areas (including international contexts and using different definitions of neighborhoods (including small-area definitions should evaluate if spatial inequalities are found using composite measures, but also should

Robust Throughput Boosting for Low Latency Dynamic Partial Reconfiguration

DEFF Research Database (Denmark)

Nannarelli, Alberto; Re, M.; Cardarilli, Gian Carlo

2017-01-01

Reducing the configuration time of portions of an FPGA at run time is crucial in contemporary FPGA-based accelerators. In this work, we propose a method to increase the throughput for FPGA dynamic partial reconfiguration by using standard IP blocks. The throughput is increased by over-clocking th......Reducing the configuration time of portions of an FPGA at run time is crucial in contemporary FPGA-based accelerators. In this work, we propose a method to increase the throughput for FPGA dynamic partial reconfiguration by using standard IP blocks. The throughput is increased by over...

A Domain-Specific Language for Programming Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh; Christensen, David Johan; Støy, Kasper

2007-01-01

. Programming a modular, self-reconfigurable robot is however a complicated task: the robot is essentially a real-time, distributed embedded system, where control and communication paths often are tightly coupled to the current physical configuration of the robot. To facilitate the task of programming modular......, self-reconfigurable robots, we have developed a declarative, role-based language that allows the programmer to define roles and behavior independently of the concrete physical structure of the robot. Roles are compiled to mobile code fragments that distribute themselves over the physical structure...

Lateral shearing optical gradient force in coupled nanobeam photonic crystal cavities

Energy Technology Data Exchange (ETDEWEB)

Du, Han; Zhang, Xingwang; Chau, Fook Siong; Zhou, Guangya, E-mail: mpezgy@nus.edu.sg [Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117575 (Singapore); Deng, Jie [Institute of Materials Research and Engineering, 2 Fusionopolis Way, Innovis, #08-03, Singapore 138634 (Singapore); Zhao, Yunshan [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117583 (Singapore)

2016-04-25

We report the experimental observation of lateral shearing optical gradient forces in nanoelectromechanical systems (NEMS) controlled dual-coupled photonic crystal (PhC) nanobeam cavities. With an on-chip integrated NEMS actuator, the coupled cavities can be mechanically reconfigured in the lateral direction while maintaining a constant coupling gap. Shearing optical gradient forces are generated when the two cavity centers are laterally displaced. In our experiments, positive and negative lateral shearing optical forces of 0.42 nN and 0.29 nN are observed with different pumping modes. This study may broaden the potential applications of the optical gradient force in nanophotonic devices and benefit the future nanooptoelectromechanical systems.

Latin American Identity and The Contradictory Processes Involved in its Construction-Deconstruction-Reconfiguration in Global Contexts

Directory of Open Access Journals (Sweden)

Víctor Hugo Ramos

2012-07-01

Full Text Available This paper addresses the difficult and contradictory formation, consolidation and change processes of Latin American identity from an anthropological and holistic perspective and in the context of the emergence of the world-system from the conquest, colonization and independence struggles to its current reconfiguration in the midst of transnational globalization and the alternatives to it. This approach, which we could call dynamicsynthetic, sees identity as a constantly changing open process where contradictory dynamics interact in the construction-deconstruction-reconfiguration of Latin American identity in specific historical contexts. Our continental collective identity is analyzed as the result of complex strains among various civilizational dynamics and opposing geopolitical forces. Dialectical and dialogical processes work together to allow the “reconciliation” of converse and diverse elements in innovative syntheses and create a space for dialogue that fosters what is shared to have a positive interaction, without denying the specific. In other words, they facilitate the interaction between “we” and the “others”, the “national” and the “continental”, the “local” and the “global”, enabling a better understanding of our inclusive continental nominative process: “Hispano-American”, “Ibero-American”, “Latin American”

The Effects of Interference Suppression by a Reconfigurable Structure at DSSS-DPSK Receiver

Directory of Open Access Journals (Sweden)

B. Dimitrijevic

2010-12-01

Full Text Available In this paper we show the performances of DSSS-DPSK receiver where the interference rejection circuit is reconfigurable and is using ksi-structure. The results will be shown for the case of packet, as well as for the continuous QPSK interference. The results show that the proposed reconfiguration circuit, in case of packet QPSK interference, significantly decreases the error probability, compared to the system using only ksi-structure. Also, in case of continuous interference, the reconfigurable structure has equally good performance, regardless of interference power and its bitrate.

Design of a real-time open architecture controller for a reconfigurable machine tool

CSIR Research Space (South Africa)

Masekamela, I

2008-11-01

Full Text Available The paper presents the design and the development of a real-time, open architecture controller that is used for control of reconfigurable manufacturing tools (RMTs) in reconfigurable manufacturing systems (RMS). The controller that is presented can...

Identifying the driving forces of urban expansion and its environmental impact in Jakarta-Bandung mega urban region

Science.gov (United States)

Pravitasari, A. E.; Rustiadi, E.; Mulya, S. P.; Setiawan, Y.; Fuadina, L. N.; Murtadho, A.

2018-05-01

The socio-economic development in Jakarta-Bandung Mega Urban Region (JBMUR) caused the increasing of urban expansion and led to a variety of environmental damage such as uncontrolled land use conversion and raising anthropogenic disaster. The objectives of this study are: (1) to identify the driving forces of urban expansion that occurs on JBMUR and (2) to analyze the environmental quality decline on JBMUR by producing time series spatial distribution map and spatial autocorrelation of floods and landslide as the proxy of anthropogenic disaster. The driving forces of urban expansion in this study were identified by employing Geographically Weighted Regression (GWR) model using 6 (six) independent variables, namely: population density, percentage of agricultural land, distance to the center of capital city/municipality, percentage of household who works in agricultural sector, distance to the provincial road, and distance to the local road. The GWR results showed that local demographic, social and economic factors including distance to the road spatially affect urban expansion in JBMUR. The time series spatial distribution map of floods and landslide event showed the spatial cluster of anthropogenic disaster in some areas. Through Local Moran Index, we found that environmental damage in one location has a significant impact on the condition of its surrounding area.

A Network Reconfiguration Method Considering Data Uncertainties in Smart Distribution Networks

Directory of Open Access Journals (Sweden)

Ke-yan Liu

2017-05-01

Full Text Available This work presents a method for distribution network reconfiguration with the simultaneous consideration of distributed generation (DG allocation. The uncertainties of load fluctuation before the network reconfiguration are also considered. Three optimal objectives, including minimal line loss cost, minimum Expected Energy Not Supplied, and minimum switch operation cost, are investigated. The multi-objective optimization problem is further transformed into a single-objective optimization problem by utilizing weighting factors. The proposed network reconfiguration method includes two periods. The first period is to create a feasible topology network by using binary particle swarm optimization (BPSO. Then the DG allocation problem is solved by utilizing sensitivity analysis and a Harmony Search algorithm (HSA. In the meanwhile, interval analysis is applied to deal with the uncertainties of load and devices parameters. Test cases are studied using the standard IEEE 33-bus and PG&E 69-bus systems. Different scenarios and comparisons are analyzed in the experiments. The results show the applicability of the proposed method. The performance analysis of the proposed method is also investigated. The computational results indicate that the proposed network reconfiguration algorithm is feasible.

A spatial analysis of variations in health access: linking geography, socio-economic status and access perceptions

Science.gov (United States)

2011-01-01

Background This paper analyses the relationship between public perceptions of access to general practitioners (GPs) surgeries and hospitals against health status, car ownership and geographic distance. In so doing it explores the different dimensions associated with facility access and accessibility. Methods Data on difficulties experienced in accessing health services, respondent health status and car ownership were collected through an attitudes survey. Road distances to the nearest service were calculated for each respondent using a GIS. Difficulty was related to geographic distance, health status and car ownership using logistic generalized linear models. A Geographically Weighted Regression (GWR) was used to explore the spatial non-stationarity in the results. Results Respondent long term illness, reported bad health and non-car ownership were found to be significant predictors of difficulty in accessing GPs and hospitals. Geographic distance was not a significant predictor of difficulty in accessing hospitals but was for GPs. GWR identified the spatial (local) variation in these global relationships indicating locations where the predictive strength of the independent variables was higher or lower than the global trend. The impacts of bad health and non-car ownership on the difficulties experienced in accessing health services varied spatially across the study area, whilst the impacts of geographic distance did not. Conclusions Difficulty in accessing different health facilities was found to be significantly related to health status and car ownership, whilst the impact of geographic distance depends on the service in question. GWR showed how these relationships were varied across the study area. This study demonstrates that the notion of access is a multi-dimensional concept, whose composition varies with location, according to the facility being considered and the health and socio-economic status of the individual concerned. PMID:21787394

A Reconfigurable Metal-Plasma Yagi-Yuda Antenna for Microwave Applications

Directory of Open Access Journals (Sweden)

Giulia Mansutti

2017-05-01

Full Text Available This paper is an extension of the work originally presented at the European Microwave Conference (EuMC about a reconfigurable hybrid metal-plasma Yagi-Uda antenna operating at 1.55 GHz: this antenna consists of metallic reflector and active element and two plasma directors. The conference work showed through full-wave numerical simulations (CST Microwave Studio how it is possible to achieve reconfigurability with respect to the gain by turning on/off the plasma discharges. However the model that was used to represent the plasma discharges was quite ideal, so one comment that was provided questioned the actual possibility of achieving reconfigurability in a real system. Consequently we performed extensive measurements of different plasma discharges and thanks to the collected data, we noticed some important differences between the full-wave numerical model of the plasma that we used in the conference paper and the actual plasma discharges that were generated in the experimental setup: the dielectric vessel and the metallic electrodes used respectively to confine and generate the plasma have an influence on the radiation pattern of the antenna and so they must be included in the design procedure; the cylindrical plasma discharge is much easier to realize when the cylinder diameter is at least 3mm; and finally the collision frequency of the plasma in realistic cases is pretty higher than the one adopted in our previous work. Therefore this work presents a feasibility study of a more detailed and realistic model of our antenna with respect to the plasma discharges. We will show that reconfigurability can still be achieved through a proper design of the overall antenna, thus paving the way to an actual realization of the proposed reconfigurable Yagi-Uda.

Diagnosis and Reconfiguration using Bayesian Networks: An Electrical Power System Case Study

Science.gov (United States)

Knox, W. Bradley; Mengshoel, Ole

2009-01-01

Automated diagnosis and reconfiguration are important computational techniques that aim to minimize human intervention in autonomous systems. In this paper, we develop novel techniques and models in the context of diagnosis and reconfiguration reasoning using causal Bayesian networks (BNs). We take as starting point a successful diagnostic approach, using a static BN developed for a real-world electrical power system. We discuss in this paper the extension of this diagnostic approach along two dimensions, namely: (i) from a static BN to a dynamic BN; and (ii) from a diagnostic task to a reconfiguration task. More specifically, we discuss the auto-generation of a dynamic Bayesian network from a static Bayesian network. In addition, we discuss subtle, but important, differences between Bayesian networks when used for diagnosis versus reconfiguration. We discuss a novel reconfiguration agent, which models a system causally, including effects of actions through time, using a dynamic Bayesian network. Though the techniques we discuss are general, we demonstrate them in the context of electrical power systems (EPSs) for aircraft and spacecraft. EPSs are vital subsystems on-board aircraft and spacecraft, and many incidents and accidents of these vehicles have been attributed to EPS failures. We discuss a case study that provides initial but promising results for our approach in the setting of electrical power systems.

The Gospel of Matthew: Reconfigured Torah

Directory of Open Access Journals (Sweden)

Richard B. Hays

2005-10-01

Full Text Available This essay surveys the evangelist Matthew’s reading of Israel’s Scripture. Rather than focusing only on Matthew’s distinctive formula quotations, we must observe the subtler ways that Matthew evokes scriptural images and patterns. The essay highlights four major aspects of Matthew’s reading of Scripture. (1 Matthew reads Israel’s Scripture as a story that highlights election, kingship, exile, and messianic salvation as the end of exile. (2 Matthew reconfigures Torah into a call for radical transformation of the heart. (3 Matthew highlights Scripture’s call for mercy, particularly by emphasizing Hosea 6:6 as the hermeneutical key to Torah. (4 Matthew interprets the mission to the Gentiles as the fulfilment of Israel’s destiny and the active embodiment of the authority of the Son of Man (Dn 7:13-14 over the whole world. Jointly taken, these strategies of interpretation produce a striking reconfiguration of Israel’s Torah.

Implementation of the Two-Point Angular Correlation Function on a High-Performance Reconfigurable Computer

Directory of Open Access Journals (Sweden)

Volodymyr V. Kindratenko

2009-01-01

Full Text Available We present a parallel implementation of an algorithm for calculating the two-point angular correlation function as applied in the field of computational cosmology. The algorithm has been specifically developed for a reconfigurable computer. Our implementation utilizes a microprocessor and two reconfigurable processors on a dual-MAP SRC-6 system. The two reconfigurable processors are used as two application-specific co-processors. Two independent computational kernels are simultaneously executed on the reconfigurable processors while data pre-fetching from disk and initial data pre-processing are executed on the microprocessor. The overall end-to-end algorithm execution speedup achieved by this implementation is over 90× as compared to a sequential implementation of the algorithm executed on a single 2.8 GHz Intel Xeon microprocessor.

Multi-objective optimal operation of smart reconfigurable distribution grids

Directory of Open Access Journals (Sweden)

Abdollah Kavousi-Fard

2016-02-01

Full Text Available Reconfiguration is a valuable technique that can support the distribution grid from different aspects such as operation cost and loss reduction, reliability improvement, and voltage stability enhancement. An intelligent and efficient optimization framework, however, is required to reach the desired efficiency through the reconfiguration strategy. This paper proposes a new multi-objective optimization model to make use of the reconfiguration strategy for minimizing the power losses, improving the voltage profile, and enhancing the load balance in distribution grids. The proposed model employs the min-max fuzzy approach to find the most satisfying solution from a set of nondominated solutions in the problem space. Due to the high complexity and the discrete nature of the proposed model, a new optimization method based on harmony search (HS algorithm is further proposed. Moreover, a new modification method is suggested to increase the harmony memory diversity in the improvisation stage and increase the convergence ability of the algorithm. The feasibility and satisfying performance of the proposed model are examined on the IEEE 32-bus distribution system.

Optimizing a reconfigurable material via evolutionary computation

Science.gov (United States)

Wilken, Sam; Miskin, Marc Z.; Jaeger, Heinrich M.

2015-08-01

Rapid prototyping by combining evolutionary computation with simulations is becoming a powerful tool for solving complex design problems in materials science. This method of optimization operates in a virtual design space that simulates potential material behaviors and after completion needs to be validated by experiment. However, in principle an evolutionary optimizer can also operate on an actual physical structure or laboratory experiment directly, provided the relevant material parameters can be accessed by the optimizer and information about the material's performance can be updated by direct measurements. Here we provide a proof of concept of such direct, physical optimization by showing how a reconfigurable, highly nonlinear material can be tuned to respond to impact. We report on an entirely computer controlled laboratory experiment in which a 6 ×6 grid of electromagnets creates a magnetic field pattern that tunes the local rigidity of a concentrated suspension of ferrofluid and iron filings. A genetic algorithm is implemented and tasked to find field patterns that minimize the force transmitted through the suspension. Searching within a space of roughly 1010 possible configurations, after testing only 1500 independent trials the algorithm identifies an optimized configuration of layered rigid and compliant regions.

Electron beam effects on VLSI MOS conditions for testing and reconfiguration

International Nuclear Information System (INIS)

Girard, P.; Roche, F.M.; Pistoulet, B.

1986-01-01

Wafer scale integrated-MOS circuits problems related to test and reconfiguration by electron beams are analyzed. First of all the alterations in characteristics of MOS circuits submitted to an electron beam testing are considered. Then the capabilities of reconfiguration by an electron beam bombardment are discussed. The various phenomena involved are reviewed. Experimental data are reported and discussed on the light of data of the literature. (Auth.)

Why socio-political borders and boundaries matter in conservation

DEFF Research Database (Denmark)

Dallimer, Martin; Strange, Niels

2015-01-01

Acting to demarcate the spatial limits of decision-making processes, socio-political boundaries are an inevitable part of a human-dominated world. Rarely coincident with ecological boundaries, and thus having no ecological functional role by themselves, they nevertheless impose substantial costs ...

Socio spatial adaptation as a resilience form of native unplanned settlement in confrontation with new planned settlement development pressure (case study: enclave native settlement in Serpong, Tangerang)

Science.gov (United States)

Ischak, Mohammad; Setioko, Bambang; Nurgandarum, Dedes

2017-12-01

Urban growth refers to expansion of a metropolitan into sub urban areas as the surrounding environment, with no exception of Jakarta city due to limited availability and high price of land within the city. The city of Jakarta, as a metropolitan, carries of expansion in its surrounding environment including Tangerang. Privat developers may an important role in this urban growth through their large scale of new settlement development project. The formation of establishment of enclave native unplanned sub urban settlement scattered within planned new settlement in Tangerang is to be an consequence of Jakarta urban growth. This fenomena could be comprehended as a form of resilience native settlement in confrontation with the new planned settlement pressure. The aim of this research, presented in this paper is to understand the socio-spatial concept of those enclave native settlement as an adaptation form to the new planned settlement pressure. Through descriptive qualitative research method, with indepth interview as a main research instrument, this research could depict or uncover the facts that there are various form of socio-spatial adaptation as the main theme of resilience native suburban settlement formation.

Sensitivity of modeled estuarine circulation to spatial and temporal resolution of input meteorological forcing of a cold frontal passage

Science.gov (United States)

Weaver, Robert J.; Taeb, Peyman; Lazarus, Steven; Splitt, Michael; Holman, Bryan P.; Colvin, Jeffrey

2016-12-01

In this study, a four member ensemble of meteorological forcing is generated using the Weather Research and Forecasting (WRF) model in order to simulate a frontal passage event that impacted the Indian River Lagoon (IRL) during March 2015. The WRF model is run to provide high and low, spatial (0.005° and 0.1°) and temporal (30 min and 6 h) input wind and pressure fields. The four member ensemble is used to force the Advanced Circulation model (ADCIRC) coupled with Simulating Waves Nearshore (SWAN) and compute the hydrodynamic and wave response. Results indicate that increasing the spatial resolution of the meteorological forcing has a greater impact on the results than increasing the temporal resolution in coastal systems like the IRL where the length scales are smaller than the resolution of the operational meteorological model being used to generate the forecast. Changes in predicted water elevations are due in part to the upwind and downwind behavior of the input wind forcing. The significant wave height is more sensitive to the meteorological forcing, exhibited by greater ensemble spread throughout the simulation. It is important that the land mask, seen by the meteorological model, is representative of the geography of the coastal estuary as resolved by the hydrodynamic model. As long as the temporal resolution of the wind field captures the bulk characteristics of the frontal passage, computational resources should be focused so as to ensure that the meteorological model resolves the spatial complexities, such as the land-water interface, that drive the land use responsible for dynamic downscaling of the winds.

Ultra Low Energy FDSOI Asynchronous Reconfiguration Network for Adaptive Circuits

Directory of Open Access Journals (Sweden)

Soundous Chairat

2017-05-01

Full Text Available This paper introduces a plug-and-play on-chip asynchronous communication network aimed at the dynamic reconfiguration of a low-power adaptive circuit such as an internet of things (IoT system. By using a separate communication network, we can address both digital and analog blocks at a lower configuration cost, increasing the overall system power efficiency. As reconfiguration only occurs according to specific events and has to be automatically in stand-by most of the time, our design is fully asynchronous using handshake protocols. The paper presents the circuit’s architecture, performance results, and an example of the reconfiguration of frequency locked loops (FLL to validate our work. We obtain an overall energy per bit of 0.07 pJ/bit for one stage, in a 28 nm Fully Depleted Silicon On Insulator (FDSOI technology at 0.6 V and a 1.1 ns/bit latency per stage.

Reconfigurable Signal Processing and Hardware Architecture for Broadband Wireless Communications

Directory of Open Access Journals (Sweden)

Liang Ying-Chang

2005-01-01

Full Text Available This paper proposes a broadband wireless transceiver which can be reconfigured to any type of cyclic-prefix (CP -based communication systems, including orthogonal frequency-division multiplexing (OFDM, single-carrier cyclic-prefix (SCCP system, multicarrier (MC code-division multiple access (MC-CDMA, MC direct-sequence CDMA (MC-DS-CDMA, CP-based CDMA (CP-CDMA, and CP-based direct-sequence CDMA (CP-DS-CDMA. A hardware platform is proposed and the reusable common blocks in such a transceiver are identified. The emphasis is on the equalizer design for mobile receivers. It is found that after block despreading operation, MC-DS-CDMA and CP-DS-CDMA have the same equalization blocks as OFDM and SCCP systems, respectively, therefore hardware and software sharing is possible for these systems. An attempt has also been made to map the functional reconfigurable transceiver onto the proposed hardware platform. The different functional entities which will be required to perform the reconfiguration and realize the transceiver are explained.

Market-based multiagent system for reconfiguration of shipboard power systems

International Nuclear Information System (INIS)

Huang, Kai; Srivastava, Sanjeev K.; Cartes, David A.; Sun, Li-Hsiang

2009-01-01

On ships, the electric shipboard power system (SPS) supplies electrical power to critical functions such as navigation, communication, emergency systems, and in the case of warships, weapon systems. During ship operation, some parts of the SPS may become unavailable due to damage, fault, or maintenance. For the survivability and reliability of ships, it is desired to make the SPS highly reconfigurable. This paper presents a market-based multiagent system (MAS) for the reconfiguration of radial SPS. Radial SPSs are found on majority of ships. In the proposed MAS, each agent only communicates with its neighbor agents to make the system work in a fully decentralized manner. The MAS is implemented using Java Agent Development Framework (JADE), which is fully implemented in Java and compliant with Foundation of Intelligent Physical Agents (FIPA). An SPS with two generators and four loads is used for testing the proposed MAS. The results show the proposed MAS can successfully reconfigure a radial SPS. (author)

Implementation of Reconfigurable Manufacturing Systems, the Case of The LEGO Group

DEFF Research Database (Denmark)

Wang, Ying; Bilberg, Arne; Hadar, Ronen

of reconfigurable manufacturing systems (RMS). A literature review is made to describe the advantages and core characteristics of RMS. Based on the theory, a conceptual model is developed to analyze where RMS would be most suitable and have most benefits in The LEGO Group. Finally, the conclusion is drawn based...... on the analysis through the model. Keywords: Reconfigurable Manufacturing Systems, Conceptual Model of RMS, Production of The LEGO Group...

Reconfigurable Computing for Dynamically Reprogrammable Communications, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This project addresses the need for a framework and domain architecture suitable for reconfigurable transceivers and associated component technologies. The goal of...

Assessing the Development of Kenya National Spatial Data ...

African Journals Online (AJOL)

Spatial data plays a vital role in developmental activities, whether natural resource management or socio-economic development. Spatial Data Infrastructures (SDIs) facilitate access, sharing and dissemination of spatial data necessary for complex decision-making processes of the future. Thus, conducting SDI assessment ...

Easy Reconfiguration of Modular Industrial Collaborative Robots

DEFF Research Database (Denmark)

Schou, Casper

2016-01-01

the production staff collaborating to perform common tasks. This change of environment imposes a much more dynamic lifecycle for the robot which consequently requires new ways of interacting. This thesis investigates how the changeover to a new task on a collaborative robot can be performed by the shop floor...... operators already working alongside the robot. To effectively perform this changeover, the operator must both reconfigure the hardware of the robot and reprogram the robot to match the new task. To enable shop floor operators to quickly and intuitively program the robot, this thesis proposes the use...... of parametric, task-related robot skills with a manual parameterization method. Reconfiguring the hardware entails adding, removing, or modifying some of the robot’s components. This thesis investigate how software configurator tools can aid the operator in selecting appropriate hardware modules, and how agent...

Validation of multi-body modelling methodology for reconfigurable underwater robots

DEFF Research Database (Denmark)

Nielsen, M.C.; Eidsvik, O. A.; Blanke, Mogens

2016-01-01

This paper investigates the problem of employing reconfigurable robots in an underwater setting. The main results presented is the experimental validation of a modelling methodology for a system consisting of N dynamically connected robots with heterogeneous dynamics. Two distinct types...... of experiments are performed, a series of hydrostatic free-decay tests and a series of open-loop trajectory tests. The results are compared to a simulation based on the modelling methodology. The modelling methodology shows promising results for usage with systems composed of reconfigurable underwater modules...

Forced underwater laminar flows with active magnetohydrodynamic metamaterials

Science.gov (United States)

Culver, Dean; Urzhumov, Yaroslav

2017-12-01

Theory and practical implementations for wake-free propulsion systems are proposed and proven with computational fluid dynamic modeling. Introduced earlier, the concept of active hydrodynamic metamaterials is advanced by introducing magnetohydrodynamic metamaterials, structures with custom-designed volumetric distribution of Lorentz forces acting on a conducting fluid. Distributions of volume forces leading to wake-free, laminar flows are designed using multivariate optimization. Theoretical indications are presented that such flows can be sustained at arbitrarily high Reynolds numbers. Moreover, it is shown that in the limit Re ≫102 , a fixed volume force distribution may lead to a forced laminar flow across a wide range of Re numbers, without the need to reconfigure the force-generating metamaterial. Power requirements for such a device are studied as a function of the fluid conductivity. Implications to the design of distributed propulsion systems underwater and in space are discussed.

Outline of a Hardware Reconfiguration Framework for Modular Industrial Mobile Manipulators

DEFF Research Database (Denmark)

Schou, Casper; Bøgh, Simon; Madsen, Ole

2014-01-01

This paper presents concepts and ideas of a hard- ware reconfiguration framework for modular industrial mobile manipulators. Mobile manipulators pose a highly flexible pro- duction resource due to their ability to autonomously navigate between workstations. However, due to this high flexibility new...... approaches to the operation of the robots are needed. Reconfig- uring the robot to a new task should be carried out by shop floor operators and, thus, be both quick and intuitive. Late research has already proposed a method for intuitive robot programming. However, this relies on a predetermined hardware...... configuration. Finding a single multi-purpose hardware configuration suited to all tasks is considered unrealistic. As a result, the need for reconfiguration of the hardware is inevitable. In this paper an outline of a framework for making hardware reconfiguration quick and intuitive is presented. Two main...

SaRDIn - A Safe Reconfigurable Distributed Interlocking

DEFF Research Database (Denmark)

Fantechi, Alessandro; Gnesi, S.; Haxthausen, Anne Elisabeth

2016-01-01

Current computer-based interlocking systems most often have a centralized design, with all logic residing in a single computer. Centralized interlockings are complex to design. Following the general trend in Cyber-Physical Systems, the SaRDIn (Safe Reconfigurable Distributed Interlockings) concept...

Homogeneous and single-side-operational connector mechanism for self-reconfigurable, self-assembly and self-healing systems

Science.gov (United States)

Shen, Wei-Min (Inventor); Kovac, Robert M. (Inventor)

2012-01-01

Designs of single-end-operative reconfigurable genderless connectors that include a base, a plurality of movable jaws that are formed on the base and can engage to the jaws of another connector, and an actuator that is mounted on the base and can engage and move the jaws of the reconfigurable connector to connect the reconfigurable connector with another connector.

A reconfigurable all-optical VPN based on XGM effect of SOA in WDM PON

Science.gov (United States)

Hu, Xiaofeng; Zhang, Liang; Cao, Pan; Wang, Tao; Su, Yikai

2010-12-01

We propose and experimentally demonstrate a reconfigurable all-optical VPN scheme enabling intercommunications among different ONUs in a WDM PON. Reconfiguration is realized by dynamically setting wavelength conversion of optical VPN signal using a SOA in the OLT.

Characterization and spatial modeling of urban sprawl in the Wuhan Metropolitan Area, China

Science.gov (United States)

Zeng, Chen; Liu, Yaolin; Stein, Alfred; Jiao, Limin

2015-02-01

Urban sprawl has led to environmental problems and large losses of arable land in China. In this study, we monitor and model urban sprawl by means of a combination of remote sensing, geographical information system and spatial statistics. We use time-series data to explore the potential socio-economic driving forces behind urban sprawl, and spatial models in different scenarios to explore the spatio-temporal interactions. The methodology is applied to the city of Wuhan, China, for the period from 1990 to 2013. The results reveal that the built-up land has expanded and has dispersed in urban clusters. Population growth, and economic and transportation development are still the main causes of urban sprawl; however, when they have developed to certain levels, the area affected by construction in urban areas (Jian Cheng Qu (JCQ)) and the area of cultivated land (ACL) tend to be stable. Spatial regression models are shown to be superior to the traditional models. The interaction among districts with the same administrative status is stronger than if one of those neighbors is in the city center and the other in the suburban area. The expansion of urban built-up land is driven by the socio-economic development at the same period, and greatly influenced by its spatio-temporal neighbors. We conclude that the integration of remote sensing, a geographical information system, and spatial statistics offers an excellent opportunity to explore the spatio-temporal variation and interactions among the districts in the sprawling metropolitan areas. Relevant regulations to control the urban sprawl process are suggested accordingly.

Dynamic reconfiguration of human brain functional networks through neurofeedback.

Science.gov (United States)

Haller, Sven; Kopel, Rotem; Jhooti, Permi; Haas, Tanja; Scharnowski, Frank; Lovblad, Karl-Olof; Scheffler, Klaus; Van De Ville, Dimitri

2013-11-01

Recent fMRI studies demonstrated that functional connectivity is altered following cognitive tasks (e.g., learning) or due to various neurological disorders. We tested whether real-time fMRI-based neurofeedback can be a tool to voluntarily reconfigure brain network interactions. To disentangle learning-related from regulation-related effects, we first trained participants to voluntarily regulate activity in the auditory cortex (training phase) and subsequently asked participants to exert learned voluntary self-regulation in the absence of feedback (transfer phase without learning). Using independent component analysis (ICA), we found network reconfigurations (increases in functional network connectivity) during the neurofeedback training phase between the auditory target region and (1) the auditory pathway; (2) visual regions related to visual feedback processing; (3) insula related to introspection and self-regulation and (4) working memory and high-level visual attention areas related to cognitive effort. Interestingly, the auditory target region was identified as the hub of the reconfigured functional networks without a-priori assumptions. During the transfer phase, we again found specific functional connectivity reconfiguration between auditory and attention network confirming the specific effect of self-regulation on functional connectivity. Functional connectivity to working memory related networks was no longer altered consistent with the absent demand on working memory. We demonstrate that neurofeedback learning is mediated by widespread changes in functional connectivity. In contrast, applying learned self-regulation involves more limited and specific network changes in an auditory setup intended as a model for tinnitus. Hence, neurofeedback training might be used to promote recovery from neurological disorders that are linked to abnormal patterns of brain connectivity. Copyright © 2013 Elsevier Inc. All rights reserved.

Reconfiguration de visualisations du CRDI

International Development Research Centre (IDRC) Digital Library (Canada)

Office 2004 Test Drive User

Dans chaque reconfiguration, j'ai essayé de demeu- rer raisonnablement fidèle à l'original. Par exemple, la taille globale des éléments sta- tiques n'a pas changé. Dans trois des quatre cas, j'ai conservé la typographie et la palette de couleurs de l'original. En outre, j'ai supposé que la visualisation (l'image) était destinée à.

Multi-criteria grey relational approach to evaluating reconfigurable manufacturing configurations

Directory of Open Access Journals (Sweden)

Rehman, A. U.

2017-05-01

Full Text Available In response to highly dynamic markets, manufacturing industries need alternative feasible manufacturing strategies. The strategy currently adopted is to reconfigure the existing manufacturing system. The conditions to reconfigure existing configurations change from time to time. An attempt is made to identify and apply an approach to evaluate these configurations. The paper proposes a grey relational decision-making approach. The approach takes into account multiple performance measures. The ProModel 6.2 simulation platform is adopted to examine the performance of each feasible alternative manufacturing configuration.

Spatial Patterns of Development Drive Water Use

Science.gov (United States)

Sanchez, G. M.; Smith, J. W.; Terando, A.; Sun, G.; Meentemeyer, R. K.

2018-03-01

Water availability is becoming more uncertain as human populations grow, cities expand into rural regions and the climate changes. In this study, we examine the functional relationship between water use and the spatial patterns of developed land across the rapidly growing region of the southeastern United States. We quantified the spatial pattern of developed land within census tract boundaries, including multiple metrics of density and configuration. Through non-spatial and spatial regression approaches we examined relationships and spatial dependencies between the spatial pattern metrics, socio-economic and environmental variables and two water use variables: a) domestic water use, and b) total development-related water use (a combination of public supply, domestic self-supply and industrial self-supply). Metrics describing the spatial patterns of development had the highest measure of relative importance (accounting for 53% of model's explanatory power), explaining significantly more variance in water use compared to socio-economic or environmental variables commonly used to estimate water use. Integrating metrics characterizing the spatial pattern of development into water use models is likely to increase their utility and could facilitate water-efficient land use planning.

Schematic Approach to Information Services Reconfiguration

Directory of Open Access Journals (Sweden)

Sabah Al-Fedaghi

2015-02-01

Full Text Available Information system change is concerned with deliberate modifications to an organization’s technical and organiza‐ tional subsystems that deal with information. Changes result in adjustments being made to the configuration of information systems that could have an impact on the operations of those systems. This paper examines the problem of interference between old configuration activi‐ ties, new configuration activities and reconfiguration activities that occur due to overlapping modes. The paper proposes a novel form of depicting and solving the problem based on a flow-based conceptualization in which a configuration can be viewed as a system of flow systems organized architecturally, described by their internal flows, and connected by external flows and triggering. This method of diagramming is applied to a complex case study involving the reconfiguration of an office workflow for order processing described in BPMN. The diagrams resulting from this method and the BPMN diagrams are then examined side by side. Accordingly, the conclusion is that a new high-level representation seems more system‐ atic as a foundation for building a conceptual schema of business processes.

Universal Reconfigurable Translator Module (URTM) Final Report

Science.gov (United States)

Leventhal, Edward; Machan, Roman; Jones, Rob

2009-01-01

This report describes the Universal Reconfigurable Translation Module, or URTM. The URTM was developed by Sigma Space Corporation for NASA in order to translate specific serial protocols, both logically and physically. At present, the prototype configuration has targeted MIL-STD-1553B (RT and BC), IEEE 1394b (Firewire), and ECSS-E-50-12A (SpaceWire). The objectives of this program were to study the feasibility of a configurable URTM to translate serial link data as might be used in a space-flight mission and to design, develop, document, and deliver an engineering prototype model of the URTM with a path to spaceflight. By simply connecting two of the three Physical Interface Modules (PIM) on either end of the RPTM (Reconfigurable Protocol Translator Module), the URTM then self configures via a library of interface translation functions, thereby allowing the two data links to communicate seamlessly.

SmartCell: An Energy Efficient Coarse-Grained Reconfigurable Architecture for Stream-Based Applications

Directory of Open Access Journals (Sweden)

Liang Cao

2009-01-01

Full Text Available This paper presents SmartCell, a novel coarse-grained reconfigurable architecture, which tiles a large number of processor elements with reconfigurable interconnection fabrics on a single chip. SmartCell is able to provide high performance and energy efficient processing for stream-based applications. It can be configured to operate in various modes, such as SIMD, MIMD, and systolic array. This paper describes the SmartCell architecture design, including processing element, reconfigurable interconnection fabrics, instruction and control process, and configuration scheme. The SmartCell prototype with 64 PEs is implemented using 0.13  m CMOS standard cell technology. The core area is about 8.5  , and the power consumption is about 1.6 mW/MHz. The performance is evaluated through a set of benchmark applications, and then compared with FPGA, ASIC, and two well-known reconfigurable architectures including RaPiD and Montium. The results show that the SmartCell can bridge the performance and flexibility gap between ASIC and FPGA. It is also about 8% and 69% more energy efficient than Montium and RaPiD systems for evaluated benchmarks. Meanwhile, SmartCell can achieve 4 and 2 times more throughput gains when comparing with Montium and RaPiD, respectively. It is concluded that SmartCell system is a promising reconfigurable and energy efficient architecture for stream processing.

Socio-spatial change in Lithuania – Depopulation and increasing spatial inequalities

Directory of Open Access Journals (Sweden)

Ruta Ubareviciene

2017-09-01

This thesis focuses on four areas of social-spatial change: population decline, shifting residential patterns, social segregation and increasing regional inequalities. These processes characterised Lithuania in the recent decades. Firstly, due to its exceptional geopolitical situation (the experience of a shift from the Soviet Union to the EU and, secondly, due to the specific legacy of Soviet planning policy.

Comparison of environmental and socio-economic domains of vulnerability to flood hazards

Science.gov (United States)

Leidel, M.; Kienberger, S.; Lang, S.; Zeil, P.

2009-04-01

Socio-economic and environmental based vulnerability models have been developed within the research context of the FP6 project BRAHMATWINN. The conceptualisation of vulnerability has been defined in the project and is characterised as a function of sensitivity and adaptive capacity, where sensitivity is used to refer to systems that are susceptible to the impacts of environmental stress. Adaptive capacity is used to refer to systems or resources available to communities that could help them adapt or cope with the adverse consequences of environmental stresses in the recovery phase. In a wider context the approach reflects the wider objective and conceptualizations of the IPCC (Intergovernmental Panel on Climate Change) framework, where vulnerability is characterized as a component of overall risk. A methodology has been developed which delineates spatial units of vulnerability (VULNUS). These units share a specific common characteristic and allow the independent spatial modelling of a complex phenomena independent from administrative units and raster based approaches. An increasing detail of spatial data and complex decision problems require flexible means for scaled spatial representations, for mapping the dynamics and constant changes, and delivering the crucial information. Automated techniques of object-based image analysis (OBIA, Lang & Blaschke, 2006), capable of integrating a virtually unlimited set of spatial data sets, try to match the information extraction with our world view. To account for that, a flexible concept of manageable units is required. The term geon was proposed by Lang (2008) to describe generic spatial objects that are homogenous in terms of a varying spatial phenomena under the influence of, and partly controlled by, policy actions. The geon concept acts as a framework for the regionalization of continuous spatial information according to defined parameters of homogeneity. It is flexible in terms of a certain perception of a problem

Optimal energy management strategy for self-reconfigurable batteries

International Nuclear Information System (INIS)

Bouchhima, Nejmeddine; Schnierle, Marc; Schulte, Sascha; Birke, Kai Peter

2017-01-01

This paper proposes a novel energy management strategy for multi-cell high voltage batteries where the current through each cell can be controlled, called self-reconfigurable batteries. An optimized control strategy further enhances the energy efficiency gained by the hardware architecture of those batteries. Currently, achieving cell equalization by using the active balancing circuits is considered as the best way to optimize the energy efficiency of the battery pack. This study demonstrates that optimizing the energy efficiency of self-reconfigurable batteries is no more strongly correlated to the cell balancing. According to the features of this novel battery architecture, the energy management strategy is formulated as nonlinear dynamic optimization problem. To solve this optimal control, an optimization algorithm that generates the optimal discharge policy for a given driving cycle is developed based on dynamic programming and code vectorization. The simulation results show that the designed energy management strategy maximizes the system efficiency across the battery lifetime over conventional approaches. Furthermore, the present energy management strategy can be implemented online due to the reduced complexity of the optimization algorithm. - Highlights: • The energy efficiency of self-reconfigurable batteries is maximized. • The energy management strategy for the battery is formulated as optimal control problem. • Developing an optimization algorithm using dynamic programming techniques and code vectorization. • Simulation studies are conducted to validate the proposed optimal strategy.

The Reconfiguration of the Theatre Space and the Relationship between Public and Private in the Case of Apartment Theatre

Directory of Open Access Journals (Sweden)

Andreea Gabriela Lupu

2017-01-01

Full Text Available This article tackles the means of theatre space reconfiguration in the apartment theater (lorgean theater, simultaneously analyzing the relation between public and private specific to this form of art. Structured around both a theoretical analysis and a qualitative empirical investigation, this paper emphasizes the traits of the theatre space as component of an artistic product received by the audience, and its value in the process of artistic production, within the theatre sector. The case study of lorgean theater, including a participant observation and an individual interview, enables the understanding of these two aspects of the spatial configuration, emphasizing its hybrid nature in terms of spatial configuration and the public-private relation as well as the act of reappropriation of the domestic space through an alternative practice of theatre consumption.

Spatial, socio-economic, and ecological implications of incorporating minimum size constraints in marine protected area network design.

Science.gov (United States)

Metcalfe, Kristian; Vaughan, Gregory; Vaz, Sandrine; Smith, Robert J

2015-12-01

Marine protected areas (MPAs) are the cornerstone of most marine conservation strategies, but the effectiveness of each one partly depends on its size and distance to other MPAs in a network. Despite this, current recommendations on ideal MPA size and spacing vary widely, and data are lacking on how these constraints might influence the overall spatial characteristics, socio-economic impacts, and connectivity of the resultant MPA networks. To address this problem, we tested the impact of applying different MPA size constraints in English waters. We used the Marxan spatial prioritization software to identify a network of MPAs that met conservation feature targets, whilst minimizing impacts on fisheries; modified the Marxan outputs with the MinPatch software to ensure each MPA met a minimum size; and used existing data on the dispersal distances of a range of species found in English waters to investigate the likely impacts of such spatial constraints on the region's biodiversity. Increasing MPA size had little effect on total network area or the location of priority areas, but as MPA size increased, fishing opportunity cost to stakeholders increased. In addition, as MPA size increased, the number of closely connected sets of MPAs in networks and the average distance between neighboring MPAs decreased, which consequently increased the proportion of the planning region that was isolated from all MPAs. These results suggest networks containing large MPAs would be more viable for the majority of the region's species that have small dispersal distances, but dispersal between MPA sets and spill-over of individuals into unprotected areas would be reduced. These findings highlight the importance of testing the impact of applying different MPA size constraints because there are clear trade-offs that result from the interaction of size, number, and distribution of MPAs in a network. © 2015 Society for Conservation Biology.

Decentralization as a Cause of Spatial Segregation

Directory of Open Access Journals (Sweden)

Jasarovic Ema Alihodzic

2016-01-01

Full Text Available City represents an incomplete dynamic process prone to the expansion with a causal link between urban expansion and socio-spatial segregation. The socio-spatial distribution in the city is mostly related to the increased social polarization and inequality. There is a clear connection between divided society and divided city: if society is divided, urban space must be divided. It is the question of the relations between the social inequalities on one hand, and spatial segregation on the other. In the last 10 years, Podgorica is the city that shows alarming statistic values when it comes to demographic trends and the influx of the residents from the northern municipalities, which necessarily causes the city sprawl. Past experiences show that city is unevenly expanding, creating new functions and zones expressed by socio-spatial differences. The beginning of this process lies in modernist conception of the city, by which city was mostly developed, while the current functional organization is based on the same concept. With the first urban plans, which carried similarproblems mentioned in previous section, Podgorica was divided into three clearly differentiated zones: Stara Varoš, Nova Varoš and Novi grad, which became a platform for hierarchical divisions within the space, reflecting them in the society.

Importance analysis for reconfigurable systems

International Nuclear Information System (INIS)

Si, Shubin; Levitin, Gregory; Dui, Hongyan; Sun, Shudong

2014-01-01

Importance measures are used in reliability engineering to rank the system components according to their contributions to proper functioning of the entire system and to find the most effective ways of reliability enhancement. Traditionally, the importance measures do not consider the possible change of system structure with the improvement of specific component reliability. However, if a component's reliability changes, the optimal system structure/configuration may also change and the importance of the corresponding component will depend on the chosen structure. When the most promising component reliability improvement is determined, the component importance should be taken into account with respect to the possible structure changes. This paper studies the component reliability importance indices with respect to the changes of the optimal component sequencing. This importance measure indicates the critical components in providing the system reliability enhancement by both enhancing the component's reliability and reconfiguring the system. Examples of linear consecutive-k-out-of-n: F and G systems are considered to demonstrate the change of the component Birnbaum importance with the optimal system reconfiguration. The results show that the change of the importance index corresponds to the change of the system optimal configuration and the importance index can change not monotonically with the variation of the component reliability

Wideband Monolithic Tile for Reconfigurable Phased Arrays

Science.gov (United States)

2017-03-01

interference and jamming. Previous reconfigurable architectures [1] were limited in bandwidth and performance by the use of discrete SMT components with...Settings Figure 7 shows the feed point and segment activation with control settings optimized for Gain, Horizontal Polarization, Steered at Phi = 15°, 6

Control Reconfigurability of Bilinear Hydraulic Drive Systems

DEFF Research Database (Denmark)

Shaker, Hamid Reza; Tahavori, Maryamsadat

2011-01-01

The objective of the methods within the framework of the plug and play process control and particularly fault tolerant control is to establish control techniques which guarantee a certain performance through control reconfiguration at the occurrence of the faults or changes. These methods cannot ...

A methodological approach for designing and sequencing product families in Reconfigurable Disassembly Systems

Directory of Open Access Journals (Sweden)

Ignacio Eguia

2011-10-01

Full Text Available Purpose: A Reconfigurable Disassembly System (RDS represents a new paradigm of automated disassembly system that uses reconfigurable manufacturing technology for fast adaptation to changes in the quantity and mix of products to disassemble. This paper deals with a methodology for designing and sequencing product families in RDS. Design/methodology/approach: The methodology is developed in a two-phase approach, where products are first grouped into families and then families are sequenced through the RDS, computing the required machines and modules configuration for each family. Products are grouped into families based on their common features using a Hierarchical Clustering Algorithm. The optimal sequence of the product families is calculated using a Mixed-Integer Linear Programming model minimizing reconfigurability and operational costs. Findings: This paper is focused to enable reconfigurable manufacturing technologies to attain some degree of adaptability during disassembly automation design using modular machine tools. Research limitations/implications: The MILP model proposed for the second phase is similar to the well-known Travelling Salesman Problem (TSP and therefore its complexity grows exponentially with the number of products to disassemble. In real-world problems, which a higher number of products, it may be advisable to solve the model approximately with heuristics. Practical implications: The importance of industrial recycling and remanufacturing is growing due to increasing environmental and economic pressures. Disassembly is an important part of remanufacturing systems for reuse and recycling purposes. Automatic disassembly techniques have a growing number of applications in the area of electronics, aerospace, construction and industrial equipment. In this paper, a design and scheduling approach is proposed to apply in this area. Originality/value: This paper presents a new concept called Reconfigurable Disassembly System

Towards Python-based Domain-specific Languages for Self-reconfigurable Modular Robotics Research

DEFF Research Database (Denmark)

Moghadam, Mikael; Johan Christensen, David; Brandt, David

2013-01-01

This paper explores the role of operating system and high-level languages in the development of software and domain-specific languages (DSLs) for self-reconfigurable robotics. We review some of the current trends in self-reconfigurable robotics and describe the development of a software system...... for ATRON II which utilizes Linux and Python to significantly improve software abstraction and portability while providing some basic features which could prove useful when using Python, either stand-alone or via a DSL, on a self-reconfigurable robot system. These features include transparent socket...... communication, module identification, easy software transfer and reliable module-to-module communication. The end result is a software platform for modular robots that where appropriate builds on existing work in operating systems, virtual machines, middleware and high-level languages....

Heterogeneous reconfigurable processors for real-time baseband processing from algorithm to architecture

CERN Document Server

Zhang, Chenxin; Öwall, Viktor

2016-01-01

This book focuses on domain-specific heterogeneous reconfigurable architectures, demonstrating for readers a computing platform which is flexible enough to support multiple standards, multiple modes, and multiple algorithms. The content is multi-disciplinary, covering areas of wireless communication, computing architecture, and circuit design. The platform described provides real-time processing capability with reasonable implementation cost, achieving balanced trade-offs among flexibility, performance, and hardware costs. The authors discuss efficient design methods for wireless communication processing platforms, from both an algorithm and architecture design perspective. Coverage also includes computing platforms for different wireless technologies and standards, including MIMO, OFDM, Massive MIMO, DVB, WLAN, LTE/LTE-A, and 5G. •Discusses reconfigurable architectures, including hardware building blocks such as processing elements, memory sub-systems, Network-on-Chip (NoC), and dynamic hardware reconfigur...

Characterization of a piezoelectric MEMS actuator surface toward motion-enabled reconfigurable RF circuits

Science.gov (United States)

Tellers, M. C.; Pulskamp, J. S.; Bedair, S. S.; Rudy, R. Q.; Kierzewski, I. M.; Polcawich, R. G.; Bergbreiter, S. E.

2018-03-01

As an alternative to highly constrained hard-wired reconfigurable RF circuits, a motion-enabled reconfigurable circuit (MERC) offers freedom from transmission line losses and homogeneous materials selection. The creation of a successful MERC requires a precise mechanical mechanism for relocating components. In this work, a piezoelectric MEMS actuator array is modeled and experimentally characterized to assess its viability as a solution to the MERC concept. Actuation and design parameters are evaluated, and the repeatability of high quality on-axis motion at greater than 1 mm s-1 is demonstrated with little positional error. Finally, an initial proof-of-concept circuit reconfiguration has been demonstrated using off-the-shelf RF filter components. Although initial feasibility tests show filter performance degradation with an additional insertion loss of 0.3 dB per contact, out-of-band rejection degradation as high as 10 dB, and ripple performance reduction from 0.25 dB to 1.5 dB, MERC is proven here as an alternative to traditional approaches used in reconfigurable RF circuit applications.

An Overview of Reconfigurable Hardware in Embedded Systems

Directory of Open Access Journals (Sweden)

Wenyin Fu

2006-09-01

Full Text Available Over the past few years, the realm of embedded systems has expanded to include a wide variety of products, ranging from digital cameras, to sensor networks, to medical imaging systems. Consequently, engineers strive to create ever smaller and faster products, many of which have stringent power requirements. Coupled with increasing pressure to decrease costs and time-to-market, the design constraints of embedded systems pose a serious challenge to embedded systems designers. Reconfigurable hardware can provide a flexible and efficient platform for satisfying the area, performance, cost, and power requirements of many embedded systems. This article presents an overview of reconfigurable computing in embedded systems, in terms of benefits it can provide, how it has already been used, design issues, and hurdles that have slowed its adoption.

Socio-economic exposure to natural disasters

International Nuclear Information System (INIS)

Marin, Giovanni; Modica, Marco

2017-01-01

Even though the correct assessment of risks is a key aspect of the risk management analysis, we argue that limited effort has been devoted in the assessment of comprehensive measures of economic exposure at very low scale. For this reason, we aim at providing a series of suitable methodologies to provide a complete and detailed list of the exposure of economic activities to natural disasters. We use Input-Output models to provide information about several socio-economic variables, such as population density, employment density, firms' turnover and capital stock, that can be seen as direct and indirect socio-economic exposure to natural disasters. We then provide an application to the Italian context. These measures can be easily incorporated into risk assessment models to provide a clear picture of the disaster risk for local areas. - Highlights: • Ex ante assessment of economic exposure to disasters at very low geographical scale • Assessment of the cost of natural disasters in ex-post perspective • IO model and spatial autocorrelation to get information on socio-economic variables • Indicators supporting risk assessment and risk management models

Socio-economic exposure to natural disasters

Energy Technology Data Exchange (ETDEWEB)

Marin, Giovanni, E-mail: giovanni.marin@uniurb.it [Department of Economics, Society, Politics, University of Urbino ' Carlo Bo' , via Aurelio Saffi, 2, 61029 Urbino (Italy); IRCrES - CNR, Research Institute on Sustainable Economic Growth, Via Corti 12, 20133 - Milano (Italy); SEEDS, Ferrara (Italy); Modica, Marco, E-mail: marco.modica@ircres.cnr.it [IRCrES - CNR, Research Institute on Sustainable Economic Growth, Via Corti 12, 20133 - Milano (Italy); SEEDS, Ferrara (Italy)

2017-05-15

Even though the correct assessment of risks is a key aspect of the risk management analysis, we argue that limited effort has been devoted in the assessment of comprehensive measures of economic exposure at very low scale. For this reason, we aim at providing a series of suitable methodologies to provide a complete and detailed list of the exposure of economic activities to natural disasters. We use Input-Output models to provide information about several socio-economic variables, such as population density, employment density, firms' turnover and capital stock, that can be seen as direct and indirect socio-economic exposure to natural disasters. We then provide an application to the Italian context. These measures can be easily incorporated into risk assessment models to provide a clear picture of the disaster risk for local areas. - Highlights: • Ex ante assessment of economic exposure to disasters at very low geographical scale • Assessment of the cost of natural disasters in ex-post perspective • IO model and spatial autocorrelation to get information on socio-economic variables • Indicators supporting risk assessment and risk management models.

Robust reconfigurable control for parametric and additive faults with FDI uncertainties

DEFF Research Database (Denmark)

Stoustrup, Jakob; Yang, Zhenyu

2000-01-01

From the system recoverable point of view, this paper discusses robust reconfigurable control synthesis for LTI systems and a class of nonlinear control systems with parametric and additive faults as well as derivations generated by FDI algorithms. By following the model-matching strategy......, an augmented optimal control problem is constructed based on the considered faulty and fictitious nominal systems, such that the robust control design techniques, such as H-infinity control and mu synthesis, can be employed for the reconfigurable control design....

Efficient Modelling Methodology for Reconfigurable Underwater Robots

DEFF Research Database (Denmark)

Nielsen, Mikkel Cornelius; Blanke, Mogens; Schjølberg, Ingrid

2016-01-01

This paper considers the challenge of applying reconfigurable robots in an underwater environment. The main result presented is the development of a model for a system comprised of N, possibly heterogeneous, robots dynamically connected to each other and moving with 6 Degrees of Freedom (DOF). Th...

Hardware support for software controlled fast reconfiguration of performance counters

Science.gov (United States)

Salapura, Valentina; Wisniewski, Robert W.

2013-06-18

Hardware support for software controlled reconfiguration of performance counters may include a plurality of performance counters collecting one or more counts of one or more selected activities. A storage element stores data value representing a time interval, and a timer element reads the data value and detects expiration of the time interval based on the data value and generates a signal. A plurality of configuration registers stores a set of performance counter configurations. A state machine receives the signal and selects a configuration register from the plurality of configuration registers for reconfiguring the one or more performance counters.

Thermooptic two-mode interference device for reconfigurable quantum optic circuits

Science.gov (United States)

Sahu, Partha Pratim

2018-06-01

Reconfigurable large-scale integrated quantum optic circuits require compact component having capability of accurate manipulation of quantum entanglement for quantum communication and information processing applications. Here, a thermooptic two-mode interference coupler has been introduced as a compact component for generation of reconfigurable complex multi-photons quantum interference. Both theoretical and experimental approaches are used for the demonstration of two-photon and four-photon quantum entanglement manipulated with thermooptic phase change in TMI region. Our results demonstrate complex multi-photon quantum interference with high fabrication tolerance and quantum fidelity in smaller dimension than previous thermooptic Mach-Zehnder implementations.

Modular reconfigurable machines incorporating modular open architecture control

CSIR Research Space (South Africa)

Padayachee, J

2008-01-01

Full Text Available degrees of freedom on a single platform. A corresponding modular Open Architecture Control (OAC) system is presented. OAC overcomes the inflexibility of fixed proprietary automation, ensuring that MRMs provide the reconfigurability and extensibility...

La question locale comme nouvelle frontière socio-spatiale

Directory of Open Access Journals (Sweden)

Christophe Gibout

2009-06-01

Full Text Available Partant de l’objet football socialement reconnu et de deux formes de pratique préalablement identifiées – pratiques fédérale et de « pied d’immeuble » – notre travail interroge l’influence et l’importance de la localisation dans la définition formelle des pratiques et la compréhension de leurs logiques identitaires. Parce que les pratiquants déploient des « arts de faire » singuliers sur un territoire jouant le rôle de lien et de liant, notre enquête montre que la dichotomie rural/urbain ne semble plus aujourd’hui heuristiquement pertinente pour comprendre le construit de la pratique sportive. Dès lors émerge la question locale – celle du « chez soi » – comme élément central de la construction sociale de la pratique sportive ; en témoigne la réalité d’une autre forme de football, non exclusive des deux autres : le football « sauvage ».The local question as a new socio-spatial frontierBeyond opposition between urban and rural soccer: the “at home” oneOn the basis of socially recognized football and of two beforehand identified forms of practice – official soccer and football played at the foot of one's building – our work questions the influence and the importance of the localization in the definition of the practices and in the comprehension of their identity logics. Because of the players use « second hand habits » on a territory playing the part of bond and binder, our investigation shows that the rural/urban dichotomy doesn’t seem any more relevant today to understand the construction of sport’s practice. Consequently emerges the local question – the one of « at home » – as central element of the social construction of the sport’s practice as testified to the reality of another form of football, nonexclusive of both others: « wild » football.Lo local como nueva frontera socio-espacialMas allá de la oposición entre el futbol urbano y el futbol rural

RECONFIGURABLE PRODUCT ROUTING AND CONTROL FOR MASS CUSTOMISATION MANUFACTURING

Directory of Open Access Journals (Sweden)

A. J. Walker

2012-01-01

Full Text Available

ENGLISH ABSTRACT:Reconfigurable control of flexible manufacturing systems can allow for the efficient and responsive production of customised product instances. This can aid in providing make-to-order business models for various small- to medium-sized enterprises in South Africa, and provide competitive advantage in a dynamic global marketplace. Reconfigurable control application requires an understanding of the modes of production variability in mass customisation manufacturing. Temporally uncorrelated workflow routings are considered as one of these production variability modes. In this light, this paper addresses the flexible material payload routing problem, and presents a mobile robot platform that has been developed to research and design reconfigurable routing systems.

AFRIKAANSE OPSOMMING:Verstelbare beheer van aanpasbare vervaardigingstelsels kan die doeltreffende en reaktiewe produksie van doelgemaakte produkeksemplare toelaat. Hierdie beheer kan assisteer in die voorsiening van vervaardig-na-bestellingbesigheidsmodelle aan ’n aantal klein- tot medium-grootte ondernemings in Suid-Afrika, en aan hulle ’n kompeterende voorsprong bied in ’n dinamiese globale mark. Die instelling van verstelbare beheer vereis dat die modi van produkveranderlikheid in massa verbruikersaanpassingsvervaardiging verstaan word. Hierdie artikel spreek die probleem van aanpasbare roetebepaling van materiaalvragte in massa verbruikersaanpassingsvervaardiging aan. ’n Mobiele robot-platform, ontwikkel vir navorsing in verstelbare roetebepalingstelsels, word ook voorgelê.

Investigation of control law reconfigurations to accommodate a control element failure on a commercial airplane

Science.gov (United States)

Ostroff, A. J.; Hueschen, R. M.

1984-01-01

The ability of a pilot to reconfigure the control surfaces on an airplane after a failure, allowing the airplane to recover to a safe condition, becomes more difficult with increasing airplane complexity. Techniques are needed to stabilize and control the airplane immediately after a failure, allowing the pilot more time to make longer range decisions. This paper presents a baseline design of a discrete multivariable control law using four controls for the longitudinal channel of a B-737. Non-reconfigured and reconfigured control laws are then evaluated, both analytically and by means of a digital airplane simulation, for three individual control element failures (stabilizer, elevator, spoilers). The simulation results are used to evaluate the effectiveness of the control reconfiguration on tracking ability during the approach and landing phase of flight with severe windshear and turbulence disturbing the airplane dynamics.

Spatial gradient tuning in metamaterials

Science.gov (United States)

Driscoll, Tom; Goldflam, Michael; Jokerst, Nan; Basov, Dimitri; Smith, David

2011-03-01

Gradient Index (GRIN) metamaterials have been used to create devices inspired by, but often surpassing the potential of, conventional GRIN optics. The unit-cell nature of metamaterials presents the opportunity to exert much greater control over spatial gradients than is possible in natural materials. This is true not only during the design phase but also offers the potential for real-time reconfiguration of the metamaterial gradient. This ability fits nicely into the picture of transformation-optics, in which spatial gradients can enable an impressive suite of innovative devices. We discuss methods to exert control over metamaterial response, focusing on our recent demonstrations using Vanadium Dioxide. We give special attention to role of memristance and mem-capacitance observed in Vanadium Dioxide, which simplify the demands of stimuli and addressing, as well as intersecting metamaterials with the field of memory-materials.

Assessing the development of Kenya National Spatial Data Infrastructure (KNSDI)

NARCIS (Netherlands)

Okuku, J.; Bregt, A.K.; Grus, L.

2014-01-01

Spatial data plays a vital role in developmental activities, whether natural resource management or socio-economic development. Spatial Data Infrastructures (SDIs) facilitate access, sharing and dissemination of spatial data necessary for complex decision-making processes of the future. Thus,

Gauging policy-driven large-scale vegetation restoration programmes under a changing environment: Their effectiveness and socio-economic relationships.

Science.gov (United States)

Li, Ting; Lü, Yihe; Fu, Bojie; Comber, Alexis J; Harris, Paul; Wu, Lianhai

2017-12-31

Large-scale ecological restoration has been widely accepted globally as an effective strategy for combating environmental crises and to facilitate sustainability. Assessing the effectiveness of ecological restoration is vital for researchers, practitioners, and policy-makers. However, few practical tools are available to perform such tasks, particularly for large-scale restoration programmes in complex socio-ecological systems. By taking a "before and after" design, this paper formulates a composite index (E j ) based on comparing the trends of vegetation cover and vegetation productivity to assess ecological restoration effectiveness. The index reveals the dynamic and spatially heterogenic process of vegetation restoration across different time periods, which can be informative for ecological restoration management at regional scales. Effectiveness together with its relationship to socio-economic factors is explored via structural equation modeling for three time periods. The results indicate that the temporal scale is a crucial factor in representing restoration effectiveness, and that the effects of socio-economic factors can also vary with time providing insight for improving restoration effectiveness. A dual-track strategy, which promotes the development of tertiary industry in absorbing the rural labor force together with improvements in agricultural practices, is proposed as a promising strategy for enhancing restoration effectiveness. In this process, timely and long-term ecological restoration monitoring is advocated, so that the success and sustainability of such programmes is ensured, together with more informative decision making where socio-ecological interactions at differing temporal scales are key concerns. Copyright © 2017 Elsevier B.V. All rights reserved.

Self-Assembling Wireless Autonomous Reconfigurable Modules (SWARM), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Payload Systems Inc. and the MIT Space Systems Laboratory propose Self-assembling, Wireless, Autonomous, Reconfigurable Modules (SWARM) as an innovative approach to...

Integrating global socio-economic influences into a regional land use change model for China

Science.gov (United States)

Xu, Xia; Gao, Qiong; Peng, Changhui; Cui, Xuefeng; Liu, Yinghui; Jiang, Li

2014-03-01

With rapid economic development and urbanization, land use in China has experienced huge changes in recent years; and this will probably continue in the future. Land use problems in China are urgent and need further study. Rapid land-use change and economic development make China an ideal region for integrated land use change studies, particularly the examination of multiple factors and global-regional interactions in the context of global economic integration. This paper presents an integrated modeling approach to examine the impact of global socio-economic processes on land use changes at a regional scale. We develop an integrated model system by coupling a simple global socio-economic model (GLOBFOOD) and regional spatial allocation model (CLUE). The model system is illustrated with an application to land use in China. For a given climate change, population growth, and various socio-economic situations, a global socio-economic model simulates the impact of global market and economy on land use, and quantifies changes of different land use types. The land use spatial distribution model decides the type of land use most appropriate in each spatial grid by employing a weighted suitability index, derived from expert knowledge about the ecosystem state and site conditions. A series of model simulations will be conducted and analyzed to demonstrate the ability of the integrated model to link global socioeconomic factors with regional land use changes in China. The results allow an exploration of the future dynamics of land use and landscapes in China.

Physical security technologies for weapons complex reconfiguration facilities

International Nuclear Information System (INIS)

Jaeger, C.D.

1994-01-01

Sandia National Laboratories was a member of the Weapons Complex Reconfiguration (WCR) Safeguards and Security (S ampersand S) team providing assistance to the Department of Energy's (DOE) Office of Weapons Complex Reconfiguration. The physical security systems in the new and upgraded facilities being considered for the WCR had to meet DOE orders and other requirements set forth in the WCR Programmatic Design Criteria (PDC), incorporate the latest physical security technologies using proven state-of-the-art systems and meet fundamental security principles. The outcome was to avoid costly retrofits and provide effective and comprehensive protection against current and projected threats with minimal impact on operations, costs and schedule. Physical security requirements for WCR facilities include: (1) reducing S ampersand S life-cycle costs, (2) where feasible automating S ampersand S functions to minimize operational costs, access to critical assets and exposure of people to hazardous environments, (3) increasing the amount of delay to outsider adversary attack, (4) compartmentalizing the facility to minimize the number of personnel requiring access to critical areas and (5) having reliable and maintainable systems. To be most effective against threats physical security must be integrated with facility operations, safety and other S ampersand S activities, such as material control and accountability, nuclear measurements and computer and information security. This paper will discuss the S ampersand S issues, requirements, technology opportunities and needs. Physical security technologies and systems considered in the design effort of the Weapons Complex Reconfiguration facilities will be reviewed

A 16-channel reconfigurable OCDMA/DWDM system using continuous phase-shift SSFBGs

OpenAIRE

Chun, Tian; Zhang, Zhaowei; Ibsen, M.; Petropoulos, P.; Richardson, D.J.

2007-01-01

We demonstrate a reconfigurable 16-channel optical code-division multiple access (OCDMA)/dense wavelength division multiplexing (DWDM) system (4 OCDMA times 4 DWDM times 625 Mb/s) based on novel 31-chip, 40 Gchip/s quaternary phase coding gratings operating at a channel spacing of just 50 GHz. The system performance is studied for cases of both fixed and code-reconfigurable decoders. Error-free performance is achieved in both cases and for all 16 channels.

Optimal reconfiguration-based dynamic tariff for congestion management and line loss reduction in distribution networks

DEFF Research Database (Denmark)

Huang, Shaojun; Wu, Qiuwei; Cheng, Lin

2016-01-01

This paper presents an optimal reconfiguration-based dynamic tariff (DT) method for congestion management and line loss reduction in distribution networks with high penetration of electric vehicles. In the proposed DT concept, feeder reconfiguration (FR) is employed through mixed integer programm...

A study on dynamically reconfigurable robotic systems, 3

International Nuclear Information System (INIS)

Fukuda, Toshio; Kawauchi, Yoshio; Buss, M.; Asama, Hajime.

1990-01-01

The dynamically reconfigurable robotic system (DRRS) is a new kind of robotic system which is able to reconfigurate itself to an optimal structure depending on the purpose and exvironment. To realize this concept, we proposed the CEBOT (cell-structured robot). Communication is needed in the CEBOT system as follows. When cells are separated, a communication master cell needs to know the other cell's function and position and determine the target cell for docking. Mobile cells should be able to coordinate with other mobile cell. When cells are docked, forming a cell structure/module, a master cell should control the bending joint cell and know which cells the construction is composed of. In this paper, we propose a communication protocol for both cases with optical sensor applicable to CEBOT. Some experimental results are shown by realizing the proposed communication method between cells. (author)

76 FR 1660 - Culturally Significant Objects Imported for Exhibition Determinations: “Reconfiguring an African...

Science.gov (United States)

2011-01-11

... Determinations: ``Reconfiguring an African Icon: Odes to the Mask by Modern and Contemporary Artists From Three... ``Reconfiguring an African Icon: Odes to the Mask by Modern and Contemporary Artists from Three Continents... that the exhibition or display of the exhibit objects at the Metropolitan Museum of Art, New York, NY...

Design of a novel parallel reconfigurable machine tool

CSIR Research Space (South Africa)

Modungwa, D

2008-06-01

Full Text Available of meeting the demands for high mechanical dexterity adaptation as well as high stiffness necessary for mould and die re-conditioning. This paper presents, the design of parallel reconfigurable machine tool (PRMT) based on both application...

Chameleon-reconfigurability in hand-held multimedia computers

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Bos, M.; Havinga, Paul J.M.; Smit, Jaap; Mullender, Sape J.; Gellersen, H.W.

In this paper a reconfigurable systems-architecture in combination with a QoS driven operating system is introduced that can deal with the inherent dynamics of future mobile systems. We claim that a radical new approach has to be taken in order to fulfill the requirements - in terms of processing

A Reconfigurable Buck, Boost, and Buck-Boost Converter: Unified Model and Robust Controller

Directory of Open Access Journals (Sweden)

Martín Antonio Rodríguez Licea

2018-01-01

Full Text Available The need for reconfigurable, high power density, and low-cost configurations of DC-DC power electronic converters (PEC in areas such as the transport electrification and the use of renewable energy has spread out the requirement to incorporate in a single circuit several topologies, which generally result in an increment of complexity about the modeling, control, and stability analyses. In this paper, a reconfigurable topology is presented which can be applied in alterative/changing power conversion scenarios and consists of a reconfigurable Buck, Boost, and Buck-Boost DC-DC converter (RBBC. A unified averaged model of the RBBC is obtained, a robust controller is designed through a polytopic representation, and a Lyapunov based switched stability analysis of the closed-loop system is presented. The reported RBBC provides a wide range of voltage operation, theoretically from -∞ to ∞ volts with a single power source. Robust stability, even under arbitrarily fast (bounded parameter variations and reconfiguration changes, is reported including numerical and experimental results. The main advantages of the converter and the robust controller proposed are simple design, robustness against abrupt changes in the parameters, and low cost.

A reconfigurable analog baseband circuit for WLAN, WCDMA, and Bluetooth

International Nuclear Information System (INIS)

Tong Tao; Chi Baoyong; Wang Ziqiang; Zhang Ying; Jiang Hanjun; Wang Zhihua

2010-01-01

A reconfigurable analog baseband circuit for WLAN, WCDMA, and Bluetooth in 0.35 μm CMOS is presented. The circuit consists of two variable gain amplifiers (VGA) in cascade and a G m -C elliptic low-pass filter (LPF). The filter-order and the cut-off frequency of the LPF can be reconfigured to satisfy the requirements of various applications. In order to achieve the optimum power consumption, the bandwidth of the VGAs can also be dynamically reconfigured and some G m cells can be cut off in the given application. Simulation results show that the analog baseband circuit consumes 16.8 mW for WLAN, 8.9 mW for WCDMA and only 6.5 mW for Bluetooth, all with a 3 V power supply. The analog baseband circuit could provide -10 to +40 dB variable gain, third-order low pass filtering with 1 MHz cut-off frequency for Bluetooth, fourth-order low pass filtering with 2.2 MHz cut-off frequency for WCDMA, and fifth-order low pass filtering with 11 MHz cut-off frequency for WLAN, respectively. (semiconductor integrated circuits)

A reconfigurable analog baseband circuit for WLAN, WCDMA, and Bluetooth

Energy Technology Data Exchange (ETDEWEB)

Tong Tao; Chi Baoyong; Wang Ziqiang; Zhang Ying; Jiang Hanjun; Wang Zhihua, E-mail: tongt05@gmail.co [Institute of Microelectronics, Tsinghua University, Beijing 100084 (China)

2010-05-15

A reconfigurable analog baseband circuit for WLAN, WCDMA, and Bluetooth in 0.35 {mu}m CMOS is presented. The circuit consists of two variable gain amplifiers (VGA) in cascade and a G{sub m}-C elliptic low-pass filter (LPF). The filter-order and the cut-off frequency of the LPF can be reconfigured to satisfy the requirements of various applications. In order to achieve the optimum power consumption, the bandwidth of the VGAs can also be dynamically reconfigured and some G{sub m} cells can be cut off in the given application. Simulation results show that the analog baseband circuit consumes 16.8 mW for WLAN, 8.9 mW for WCDMA and only 6.5 mW for Bluetooth, all with a 3 V power supply. The analog baseband circuit could provide -10 to +40 dB variable gain, third-order low pass filtering with 1 MHz cut-off frequency for Bluetooth, fourth-order low pass filtering with 2.2 MHz cut-off frequency for WCDMA, and fifth-order low pass filtering with 11 MHz cut-off frequency for WLAN, respectively. (semiconductor integrated circuits)

Reconfiguring grid-interfacing converters for power quality improvement

NARCIS (Netherlands)

Wang, F.; Duarte, J.L.; Hendrix, M.A.M.; Encica, L.; Gysen, B.L.J.; Jansen, J.W.; Krop, D.C.J.

2008-01-01

In this paper reconfiguration of grid-interfacing converters is proposed for power quality improvement. In addition to the traditional function of delivering energy between distributed sources and the utility grid, more flexible ancillary functions can be integrated into the control of

Optically Controlled Reconfigurable Antenna Array Based on E-Shaped Elements

Directory of Open Access Journals (Sweden)

Arismar Cerqueira Sodré Junior

2014-01-01

Full Text Available This work presents the development of optically controlled reconfigurable antenna arrays. They are based on two patch elements with E-shaped slots, a printed probe, and a photoconductive switch made from an intrinsic silicon die. Numerical simulations and experiments have been shown to be in agreement, and both demonstrate that the frequency response of the antenna arrays can be efficiently reconfigured over two different frequency ISM bands, namely, 2.4 and 5 GHz. A measured gain of 12.5 dBi has been obtained through the use of two radiating elements printed in a low-cost substrate and a dihedral corner reflector.

Locking of Turing patterns in the chlorine dioxide-iodine-malonic acid reaction with one-dimensional spatial periodic forcing.

Science.gov (United States)

Dolnik, Milos; Bánsági, Tamás; Ansari, Sama; Valent, Ivan; Epstein, Irving R

2011-07-21

We use the photosensitive chlorine dioxide-iodine-malonic acid reaction-diffusion system to study wavenumber locking of Turing patterns with spatial periodic forcing. Wavenumber-locked stripe patterns are the typical resonant structures that labyrinthine patterns exhibit in response to one-dimensional forcing by illumination when images of stripes are projected on a working medium. Our experimental results reveal that segmented oblique, hexagonal and rectangular patterns can also be obtained. However, these two-dimensional resonant structures only develop in a relatively narrow range of forcing parameters, where the unforced stripe pattern is in close proximity to the domain of hexagonal patterns. Numerical simulations based on a model that incorporates the forcing by illumination using an additive term reproduce well the experimental observations. These findings confirm that additive one-dimensional forcing can generate a two-dimensional resonant response. However, such a response is considerably less robust than the effect of multiplicative forcing. This journal is © the Owner Societies 2011

Socio-ecological risk factors for prime-age adult death in two coastal areas of Vietnam.

Science.gov (United States)

Kim, Deok Ryun; Ali, Mohammad; Thiem, Vu Dinh; Wierzba, Thomas F

2014-01-01

Hierarchical spatial models enable the geographic and ecological analysis of health data thereby providing useful information for designing effective health interventions. In this study, we used a Bayesian hierarchical spatial model to evaluate mortality data in Vietnam. The model enabled identification of socio-ecological risk factors and generation of risk maps to better understand the causes and geographic implications of prime-age (15 to less than 45 years) adult death. The study was conducted in two sites: Nha Trang and Hue in Vietnam. The study areas were split into 500×500 meter cells to define neighborhoods. We first extracted socio-demographic data from population databases of the two sites, and then aggregated the data by neighborhood. We used spatial hierarchical model that borrows strength from neighbors for evaluating risk factors and for creating spatially smoothed risk map after adjusting for neighborhood level covariates. The Markov chain Monte Carlo procedure was used to estimate the parameters. Male mortality was more than twice the female mortality. The rates also varied by age and sex. The most frequent cause of mortality was traffic accidents and drowning for men and traffic accidents and suicide for women. Lower education of household heads in the neighborhood was an important risk factor for increased mortality. The mortality was highly variable in space and the socio-ecological risk factors are sensitive to study site and sex. Our study suggests that lower education of the household head is an important predictor for prime age adult mortality. Variability in socio-ecological risk factors and in risk areas by sex make it challenging to design appropriate intervention strategies aimed at decreasing prime-age adult deaths in Vietnam.

Integrating DC/DC Conversion with Possible Reconfiguration within Submodule Solar Photovoltaic Systems

Science.gov (United States)

Huang, Peter Jen-Hung

This research first proposes a method to merge photovoltaic (PV) cells or PV panels within the internal components DC-DC converters. The purpose of this merged structure is to reconfigure the PV modules between series and parallel connections using high switching frequencies (hundreds of kHz). This leads to multi-levels of voltages and currents that become applied to the output filter of the converter. Further, this research introduces a concept of a switching cell that utilizes the reconfiguration of series and parallel connections in DC-DC converters. The switching occurs at high switching frequency and the switches can be integrated to be within the solar panels or in between the solar cells. The concept is generalized and applied to basic buck and boost topologies. As examples of the new types of converters: reconfigurable PV-buck and PV-boost converter topologies are presented. It is also possible to create other reconfigurable power converters: non-isolated and isolated topologies. Analysis, simulation and experimental verification for the reconfigurable PV-buck and PV-boost converters are presented extensively to illustrate proof of concept. Benefits and drawbacks of the new approach are discussed. The second part of this research proposes to utilize the internal solar cell capacitance and internal solar module wire parasitic inductances to replace the input capacitor and filter inductor in boost derived DC-DC converters for energy harvesting applications. High switching frequency (MHz) hard switched and resonant boost converters are proposed. Their analysis, simulation and experimental prototypes are presented. A specific proof-of-concept application is especially tested for foldable PV panels, which are known for their high internal wire inductance. The experimental converters successfully boost solar module voltage without adding any external input capacitance or filter inductor. Benefits and drawbacks of new proposed PV submodule integrated boost

Architecture design of reconfigurable accelerators for demanding apllications.

NARCIS (Netherlands)

Jozwiak, L.; Jan, Y.

2010-01-01

This paper focuses on mastering the architecture development of reconfigurable hardware accelerators for highly demanding applications. It presents the results of our analysis of the main issues that have to be addressed when designing accelerators for demanding applications, when using as an

Wavelength-converted long-reach reconfigurable optical access network

NARCIS (Netherlands)

Tran, N.C.; Tangdiongga, E.; Koonen, A.M.J.

2012-01-01

Next generation optical access networks should not only increase the capacity but also be able to redistribute the capacity on the fly in order to manage more fluctuated traffic patterns. Wavelength reconfigurability is the instrument to enable such capability of network-wide bandwidth

Hardware/software virtualization for the reconfigurable multicore platform.

NARCIS (Netherlands)

Ferger, M.; Al Kadi, M.; Hübner, M.; Koedam, M.L.P.J.; Sinha, S.S.; Goossens, K.G.W.; Marchesan Almeida, Gabriel; Rodrigo Azambuja, J.; Becker, Juergen

2012-01-01

This paper presents the Flex Tiles approach for the virtualization of hardware and software for a reconfigurable multicore architecture. The approach enables the virtualization of a dynamic tile-based hardware architecture consisting of processing tiles connected via a network-on-chip and a

Reconfigurable support vector machine classifier with approximate computing

NARCIS (Netherlands)

van Leussen, M.J.; Huisken, J.; Wang, L.; Jiao, H.; De Gyvez, J.P.

2017-01-01

Support Vector Machine (SVM) is one of the most popular machine learning algorithms. An energy-efficient SVM classifier is proposed in this paper, where approximate computing is utilized to reduce energy consumption and silicon area. A hardware architecture with reconfigurable kernels and

A hybrid evolutionary algorithm for distribution feeder reconfiguration

Indian Academy of Sciences (India)

the reconfiguration of distribution networks has been proposed by .... An effective strategy to increase the loading margin of heavily loaded feeders is to ... social animals such as a flock of birds, a school of fish or a group of people that pursue.

Behavioral correlates of the distributed coding of spatial context.

Science.gov (United States)

Anderson, Michael I; Killing, Sarah; Morris, Caitlin; O'Donoghue, Alan; Onyiagha, Dikennam; Stevenson, Rosemary; Verriotis, Madeleine; Jeffery, Kathryn J

2006-01-01

Hippocampal place cells respond heterogeneously to elemental changes of a compound spatial context, suggesting that they form a distributed code of context, whereby context information is shared across a population of neurons. The question arises as to what this distributed code might be useful for. The present study explored two possibilities: one, that it allows contexts with common elements to be disambiguated, and the other, that it allows a given context to be associated with more than one outcome. We used two naturalistic measures of context processing in rats, rearing and thigmotaxis (boundary-hugging), to explore how rats responded to contextual novelty and to relate this to the behavior of place cells. In experiment 1, rats showed dishabituation of rearing to a novel reconfiguration of familiar context elements, suggesting that they perceived the reconfiguration as novel, a behavior that parallels that of place cells in a similar situation. In experiment 2, rats were trained in a place preference task on an open-field arena. A change in the arena context triggered renewed thigmotaxis, and yet navigation continued unimpaired, indicating simultaneous representation of both the altered contextual and constant spatial cues. Place cells similarly exhibited a dual population of responses, consistent with the hypothesis that their activity underlies spatial behavior. Together, these experiments suggest that heterogeneous context encoding (or "partial remapping") by place cells may function to allow the flexible assignment of associations to contexts, a faculty that could be useful in episodic memory encoding. Copyright (c) 2006 Wiley-Liss, Inc.

Preservation of correctness during system reconfiguration in Data Distribution Service for Real-Time Systems (DDS)

NARCIS (Netherlands)

Zieba, Bogumil; van Sinderen, Marten J.

This paper addresses dynamic reconfiguration of distributed systems that use a publish/subscribe (pub/sub) middleware. The objective of dynamic reconfiguration is to evolve incrementally from one system configuration to another at run-time in order to e.g., ensure the reliability of the system. The

Spatial Manipulation and Assembly of Nanoparticles by Atomic Force Microscopy Tip-Induced Dielectrophoresis.

Science.gov (United States)

Zhou, Peilin; Yu, Haibo; Yang, Wenguang; Wen, Yangdong; Wang, Zhidong; Li, Wen Jung; Liu, Lianqing

2017-05-17

In this article, we present a novel method of spatial manipulation and assembly of nanoparticles via atomic force microscopy tip-induced dielectrophoresis (AFM-DEP). This method combines the high-accuracy positioning of AFM with the parallel manipulation of DEP. A spatially nonuniform electric field is induced by applying an alternating current (AC) voltage between the conductive AFM probe and an indium tin oxide glass substrate. The AFM probe acted as a movable DEP tweezer for nanomanipulation and assembly of nanoparticles. The mechanism of AFM-DEP was analyzed by numerical simulation. The effects of solution depth, gap distance, AC voltage, solution concentration, and duration time were experimentally studied and optimized. Arrays of 200 nm polystyrene nanoparticles were assembled into various nanostructures, including lines, ellipsoids, and arrays of dots. The sizes and shapes of the assembled structures were controllable. It was thus demonstrated that AFM-DEP is a flexible and powerful tool for nanomanipulation.

Static Scheduling of Periodic Hardware Tasks with Precedence and Deadline Constraints on Reconfigurable Hardware Devices

Directory of Open Access Journals (Sweden)

Ikbel Belaid

2011-01-01

Full Text Available Task graph scheduling for reconfigurable hardware devices can be defined as finding a schedule for a set of periodic tasks with precedence, dependence, and deadline constraints as well as their optimal allocations on the available heterogeneous hardware resources. This paper proposes a new methodology comprising three main stages. Using these three main stages, dynamic partial reconfiguration and mixed integer programming, pipelined scheduling and efficient placement are achieved and enable parallel computing of the task graph on the reconfigurable devices by optimizing placement/scheduling quality. Experiments on an application of heterogeneous hardware tasks demonstrate an improvement of resource utilization of 12.45% of the available reconfigurable resources corresponding to a resource gain of 17.3% compared to a static design. The configuration overhead is reduced to 2% of the total running time. Due to pipelined scheduling, the task graph spanning is minimized by 4% compared to sequential execution of the graph.

Reconfiguring waveguide-gratings-based M-signature codecs to enhance OCDMA network confidentiality

Science.gov (United States)

Huang, Jen-Fa; Chen, Kai-Sheng; Lin, Ying-Chen; Li, Chung-Yu

2014-02-01

A reconfiguration scheme based on composite signature codes over waveguide-gratings-based optical code-division multiple-access (OCDMA) network coder/decoders (codecs) is proposed in the paper. By using central control node to monitor network traffic condition and reconfigure the composite signature codes made up of maximal-length sequence (M-sequence) component codes and random changing the signature codes assigned for each user to improve the confidentiality performance in an OCDMA system. The proposed scheme is analyzed with some practical eavesdroppers' attacks.

Rewritable three-dimensional holographic data storage via optical forces

Energy Technology Data Exchange (ETDEWEB)

Yetisen, Ali K., E-mail: ayetisen@mgh.harvard.edu [Harvard Medical School and Wellman Center for Photomedicine, Massachusetts General Hospital, 65 Landsdowne Street, Cambridge, Massachusetts 02139 (United States); Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Montelongo, Yunuen [Department of Chemistry, Imperial College London, South Kensington Campus, London SW7 2AZ (United Kingdom); Butt, Haider [Nanotechnology Laboratory, School of Engineering Sciences, University of Birmingham, Birmingham B15 2TT (United Kingdom)

2016-08-08

The development of nanostructures that can be reversibly arranged and assembled into 3D patterns may enable optical tunability. However, current dynamic recording materials such as photorefractive polymers cannot be used to store information permanently while also retaining configurability. Here, we describe the synthesis and optimization of a silver nanoparticle doped poly(2-hydroxyethyl methacrylate-co-methacrylic acid) recording medium for reversibly recording 3D holograms. We theoretically and experimentally demonstrate organizing nanoparticles into 3D assemblies in the recording medium using optical forces produced by the gradients of standing waves. The nanoparticles in the recording medium are organized by multiple nanosecond laser pulses to produce reconfigurable slanted multilayer structures. We demonstrate the capability of producing rewritable optical elements such as multilayer Bragg diffraction gratings, 1D photonic crystals, and 3D multiplexed optical gratings. We also show that 3D virtual holograms can be reversibly recorded. This recording strategy may have applications in reconfigurable optical elements, data storage devices, and dynamic holographic displays.

Proof of Concept of an Irradiance Estimation System for Reconfigurable Photovoltaic Arrays

Directory of Open Access Journals (Sweden)

Vincenzo Li Vigni

2015-06-01

Full Text Available In order to reduce the mismatch effect caused by non-uniform shadows in PV arrays, reconfigurable interconnections approaches have been recently proposed in the literature. These systems usually require the knowledge of the solar radiation affecting every solar module. The aim of this work is to evaluate the effectiveness of three irradiance estimation approaches in order to define which can be well suited for reconfigurable PV arrays. It is presented a real-time solar irradiance estimation device (IrradEst, implementing the three different estimation methods. The proposed system is based on mathematical models of PV modules enabling to estimate irradiation values by sensing a combination of temperature, voltage and current of a PV module. Experimental results showed generally good agreement between the estimated irradiances and the measurements performed by a standard pyranometer taken as reference. Finally one of the three methods was selected as possible solution for a reconfigurable PV system.

Reconfigurable Computing As an Enabling Technology for Single-Photon-Counting Laser Altimetry

Science.gov (United States)

Powell, Wesley; Hicks, Edward; Pinchinat, Maxime; Dabney, Philip; McGarry, Jan; Murray, Paul

2003-01-01

Single-photon-counting laser altimetry is a new measurement technique offering significant advantages in vertical resolution, reducing instrument size, mass, and power, and reducing laser complexity as compared to analog or threshold detection laser altimetry techniques. However, these improvements come at the cost of a dramatically increased requirement for onboard real-time data processing. Reconfigurable computing has been shown to offer considerable performance advantages in performing this processing. These advantages have been demonstrated on the Multi-KiloHertz Micro-Laser Altimeter (MMLA), an aircraft based single-photon-counting laser altimeter developed by NASA Goddard Space Flight Center with several potential spaceflight applications. This paper describes how reconfigurable computing technology was employed to perform MMLA data processing in real-time under realistic operating constraints, along with the results observed. This paper also expands on these prior results to identify concepts for using reconfigurable computing to enable spaceflight single-photon-counting laser altimeter instruments.

Fine-grain reconfigurable platform: FPGA hardware design and software toolset development

International Nuclear Information System (INIS)

Pappas, I; Kalenteridis, V; Vassiliadis, N; Pournara, H; Siozios, K; Koutroumpezis, G; Tatas, K; Nikolaidis, S; Siskos, S; Soudris, D J; Thanailakis, A

2005-01-01

A complete system for the implementation of digital logic in a fine-grain reconfigurable platform is introduced. The system is composed of two parts. The fine-grain reconfigurable hardware platform (FPGA) on which the logic is implemented and the set of CAD tools for mapping logic to the FPGA platform. A novel energy-efficient FPGA architecture is presented (CLB, interconnect network, configuration hardware) and simulated in STM 0.18 μm CMOS technology. Concerning the tool flow, each tool can operate as a standalone program as well as part of a complete design framework, composed by existing and new tools

Fine-grain reconfigurable platform: FPGA hardware design and software toolset development

Energy Technology Data Exchange (ETDEWEB)

Pappas, I [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Kalenteridis, V [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Vassiliadis, N [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Pournara, H [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Siozios, K [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Koutroumpezis, G [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Tatas, K [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Nikolaidis, S [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Siskos, S [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Soudris, D J [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Thanailakis, A [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece)

2005-01-01

A complete system for the implementation of digital logic in a fine-grain reconfigurable platform is introduced. The system is composed of two parts. The fine-grain reconfigurable hardware platform (FPGA) on which the logic is implemented and the set of CAD tools for mapping logic to the FPGA platform. A novel energy-efficient FPGA architecture is presented (CLB, interconnect network, configuration hardware) and simulated in STM 0.18 {mu}m CMOS technology. Concerning the tool flow, each tool can operate as a standalone program as well as part of a complete design framework, composed by existing and new tools.

Reconfigurable intelligent sensors for health monitoring: a case study of pulse oximeter sensor.

Science.gov (United States)

Jovanov, E; Milenkovic, A; Basham, S; Clark, D; Kelley, D

2004-01-01

Design of low-cost, miniature, lightweight, ultra low-power, intelligent sensors capable of customization and seamless integration into a body area network for health monitoring applications presents one of the most challenging tasks for system designers. To answer this challenge we propose a reconfigurable intelligent sensor platform featuring a low-power microcontroller, a low-power programmable logic device, a communication interface, and a signal conditioning circuit. The proposed solution promises a cost-effective, flexible platform that allows easy customization, run-time reconfiguration, and energy-efficient computation and communication. The development of a common platform for multiple physical sensors and a repository of both software procedures and soft intellectual property cores for hardware acceleration will increase reuse and alleviate costs of transition to a new generation of sensors. As a case study, we present an implementation of a reconfigurable pulse oximeter sensor.

The socio-economic dimension of modern globalization

Directory of Open Access Journals (Sweden)

Svitlana Sidenko

2004-02-01

Full Text Available This article analyzes the views of eminent analysts on the driving forces of and explanations for economic globalization today. It examines the main characteristics of this process, such as the growth of world trade, the increased mobility of financial capital, the growing role of transnational corporations and the development of network technologies and the internet. The author analyzes the positive impact of globalization on the development of productive forces and human development. Problems arising from the growing interdependence of a globalized world, such as environmental issues, security, increased worldwide disparity of socio-economic development of countries and regions, are also examined. In conclusion, the author voices the need for establishing a system of global management.

A Design Method for Fault Reconfiguration and Fault-Tolerant Control of a Servo Motor

Directory of Open Access Journals (Sweden)

Jing He

2013-01-01

Full Text Available A design scheme that integrates fault reconfiguration and fault-tolerant position control is proposed for a nonlinear servo system with friction. Analysis of the non-linear friction torque and fault in the system is used to guide design of a sliding mode position controller. A sliding mode observer is designed to achieve fault reconfiguration based on the equivalence principle. Thus, active fault-tolerant position control of the system can be realized. A real-time simulation experiment is performed on a hardware-in-loop simulation platform. The results show that the system reconfigures well for both incipient and abrupt faults. Under the fault-tolerant control mechanism, the output signal for the system position can rapidly track given values without being influenced by faults.

Reconfigurable EVA Radio with Built-In Navigation Capability, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Automation, Inc. and its sub-contractor, Purdue University, propose to develop a power-efficient miniaturized reconfigurable EVA radio system with...

An ultra-wideband pattern reconfigurable antenna based on graphene coating

Science.gov (United States)

Jiang, YanNan; Yuan, Rui; Gao, Xi; Wang, Jiao; Li, SiMin; Lin, Yi-Yu

2016-11-01

An ultra-wideband pattern reconfigurable antenna is proposed. The antenna is a dielectric coaxial hollow monopole with a cylindrical graphene-based impedance surface coating. It consists of a graphene sheet coated onto the inner surface of a cylindrical substrate and a set of independent polysilicon DC gating pads mounted on the outside of the cylindrical substrate. By changing the DC bias voltages to the different gating pads, the surface impedance of the graphene coating can be freely controlled. Due to the tunability of graphene's surface impedance, the radiation pattern of the proposed antenna can be reconfigured. A transmission line method is used to illustrate the physical mechanism of the proposed antenna. The results show that the proposed antenna can reconfigure its radiation pattern in the omnidirectional mode with the relative bandwidth of 58.5% and the directional mode over the entire azimuth plane with the relative bandwidth of 67%. Project supported by the National Natural Science Foundation of China (Grant Nos. 61661012, 61461016, and 61361005), the Natural Science Foundation of Guangxi, China (Grant Nos. 2015GXNSFBB139003 and 2014GXNSFAA118283), Program for Innovation Research Team of Guilin University of Electromagnetic Technology, China, and the Dean Project of Guangxi Key Laboratory of Wireless Wideband Communication and Signal Processing, China.

A Workload-Adaptive and Reconfigurable Bus Architecture for Multicore Processors

Directory of Open Access Journals (Sweden)

Shoaib Akram

2010-01-01

Full Text Available Interconnection networks for multicore processors are traditionally designed to serve a diversity of workloads. However, different workloads or even different execution phases of the same workload may benefit from different interconnect configurations. In this paper, we first motivate the need for workload-adaptive interconnection networks. Subsequently, we describe an interconnection network framework based on reconfigurable switches for use in medium-scale (up to 32 cores shared memory multicore processors. Our cost-effective reconfigurable interconnection network is implemented on a traditional shared bus interconnect with snoopy-based coherence, and it enables improved multicore performance. The proposed interconnect architecture distributes the cores of the processor into clusters with reconfigurable logic between clusters to support workload-adaptive policies for inter-cluster communication. Our interconnection scheme is complemented by interconnect-aware scheduling and additional interconnect optimizations which help boost the performance of multiprogramming and multithreaded workloads. We provide experimental results that show that the overall throughput of multiprogramming workloads (consisting of two and four programs can be improved by up to 60% with our configurable bus architecture. Similar gains can be achieved also for multithreaded applications as shown by further experiments. Finally, we present the performance sensitivity of the proposed interconnect architecture on shared memory bandwidth availability.

From forced migration to forced arrival: the campization of refugee accommodation in European cities.

Science.gov (United States)

Kreichauf, René

2018-01-01

In the aftermath of large refugee arrivals in 2015, EU regulations and national asylum laws were tightened, especially those regarding reception and accommodation. The current contribution introduces the concept of "campization" to explain the impact of law and policy changes on the socio-spatial configuration and functions of refugee accommodation in European capital regions. Based on qualitative research concerning case studies for Athens, Berlin, and Copenhagen, I argue that refugee accommodation has increasingly been transformed into large, camp-like structures with lowered living standards and a closed character. This is shown by the structural, functional, and socio-spatial characteristics of the accommodation in the three case studies, as well as the political and administrative objectives that determine the campization of accommodation. The contribution lastly highlights changing notions and forms of containment, exclusion, and temporality as part of campization, and links this process to current trends in asylum and urban development.

THE SPATIAL-CULTURAL CONFIGURATION OF SEX WORK IN GOA INDIA

NARCIS (Netherlands)

Bailey, Ajay; Hutter, Inge; Huigen, Paulus P. P.

2011-01-01

Geographers have largely ignored the socio-spatial aspect of sex work in the non-Western context. Theorisation on place, sex and gender will aid in spatially situating sex work in the domain of geography. We present an empirical study to describe the spatial-cultural configuration of sex work as

Socio-ecological risk factors for prime-age adult death in two coastal areas of Vietnam.

Directory of Open Access Journals (Sweden)

Deok Ryun Kim

Full Text Available Hierarchical spatial models enable the geographic and ecological analysis of health data thereby providing useful information for designing effective health interventions. In this study, we used a Bayesian hierarchical spatial model to evaluate mortality data in Vietnam. The model enabled identification of socio-ecological risk factors and generation of risk maps to better understand the causes and geographic implications of prime-age (15 to less than 45 years adult death.The study was conducted in two sites: Nha Trang and Hue in Vietnam. The study areas were split into 500×500 meter cells to define neighborhoods. We first extracted socio-demographic data from population databases of the two sites, and then aggregated the data by neighborhood. We used spatial hierarchical model that borrows strength from neighbors for evaluating risk factors and for creating spatially smoothed risk map after adjusting for neighborhood level covariates. The Markov chain Monte Carlo procedure was used to estimate the parameters. Male mortality was more than twice the female mortality. The rates also varied by age and sex. The most frequent cause of mortality was traffic accidents and drowning for men and traffic accidents and suicide for women. Lower education of household heads in the neighborhood was an important risk factor for increased mortality. The mortality was highly variable in space and the socio-ecological risk factors are sensitive to study site and sex.Our study suggests that lower education of the household head is an important predictor for prime age adult mortality. Variability in socio-ecological risk factors and in risk areas by sex make it challenging to design appropriate intervention strategies aimed at decreasing prime-age adult deaths in Vietnam.

Designing Secure Systems on Reconfigurable Hardware

OpenAIRE

Huffmire, Ted; Brotherton, Brett; Callegari, Nick; Valamehr, Jonathan; White, Jeff; Kastner, Ryan; Sherwood, Ted

2008-01-01

The extremely high cost of custom ASIC fabrication makes FPGAs an attractive alternative for deployment of custom hardware. Embedded systems based on reconfigurable hardware integrate many functions onto a single device. Since embedded designers often have no choice but to use soft IP cores obtained from third parties, the cores operate at different trust levels, resulting in mixed trust designs. The goal of this project is to evaluate recently proposed security primitives for reconfigurab...

Reconfigurable antenna using plasma reflector

Science.gov (United States)

Jusoh, Mohd Taufik; Ahmad, Khairol Amali; Din, Muhammad Faiz Md; Hashim, Fakroul Ridzuan

2018-02-01

This paper presents the feasibility study and design of plasma implementation in industrial, scientific and medical (ISM) communication band. A reflector antenna with rounded shaped is proposed to collimate beam in particular direction radiated by a quarter wave antenna operating at 2.4GHz. The simulations result has shown that by using plasma as the reflector elements, the gain, directivity and radiation patterns are identical with metal elements with only small different in the broadside direction. The versatility of the antenna is achievable by introducing electrical reconfigurable option to change the beam pattern.

Metastable modular metastructures for on-demand reconfiguration of band structures and nonreciprocal wave propagation

Science.gov (United States)

Wu, Z.; Zheng, Y.; Wang, K. W.

2018-02-01

We present an approach to achieve adaptable band structures and nonreciprocal wave propagation by exploring and exploiting the concept of metastable modular metastructures. Through studying the dynamics of wave propagation in a chain composed of finite metastable modules, we provide experimental and analytical results on nonreciprocal wave propagation and unveil the underlying mechanisms that facilitate such unidirectional energy transmission. In addition, we demonstrate that via transitioning among the numerous metastable states, the proposed metastructure is endowed with a large number of bandgap reconfiguration possibilities. As a result, we illustrate that unprecedented adaptable nonreciprocal wave propagation can be realized using the metastable modular metastructure. Overall, this research elucidates the rich dynamics attainable through the combinations of periodicity, nonlinearity, spatial asymmetry, and metastability and creates a class of adaptive structural and material systems capable of realizing tunable bandgaps and nonreciprocal wave transmissions.

Infrastructure Mega projects and Spatial Polarization in Rio de Janeiro

DEFF Research Database (Denmark)

Silva, Victor; Ribeiro, Gustavo

2008-01-01

This paper looks at a prominent example of planning for sustainable development in Rio de Janeiro, namely the Guanabara Bay Clean-up Programme. We examine the role of the Guanabara Bay Clean-up Programme against the background of socio-economic and spatial trends in the last decade, identifying......-way containing the main traffic towards Rio de Janeiro International Airport. The Guanabara Bay Clean-up Programme interventions in both areas have contributed to perpetuate and reinforce existing patterns of spatial segregation, both between neighbourhoods of different socio-economic status and between...

Focusing Conservation Efforts on Ecosystem Service Supply May Increase Vulnerability of Socio-Ecological Systems.

Directory of Open Access Journals (Sweden)

Pedro Laterra

Full Text Available Growing concern about the loss of ecosystem services (ES promotes their spatial representation as a key tool for the internalization of the ES framework into land use policies. Paradoxically, mapping approaches meant to inform policy decisions focus on the magnitude and spatial distribution of the biophysical supply of ES, largely ignoring the social mechanisms by which these services influence human wellbeing. If social mechanisms affecting ES demand, enhancing it or reducing it, are taken more into account, then policies are more effective. By developing and applying a new mapping routine to two distinct socio-ecological systems, we show a strong spatial uncoupling between ES supply and socio-ecological vulnerability to the loss of ES, under scenarios of land use and cover change. Public policies based on ES supply might not only fail at detecting priority conservation areas for the wellbeing of human societies, but may also increase their vulnerability by neglecting areas of currently low, but highly valued ES supply.

Performance Analysis of Generating Function Approach for Optimal Reconfiguration of Formation Flying

Directory of Open Access Journals (Sweden)

Kwangwon Lee

2013-03-01

Full Text Available The use of generating functions for solving optimal rendezvous problems has an advantage in the sense that it does not require one to guess and iterate the initial costate. This paper presents how to apply generating functions to analyze spacecraft optimal reconfiguration between projected circular orbits. The series-based solution obtained by using generating functions demonstrates excellent convergence and approximation to the nonlinear reference solution obtained from a numerical shooting method. These favorable properties are expected to hold for analyzing optimal formation reconfiguration under perturbations and non-circular reference orbits.

A new reconfiguration scheme for voltage stability enhancement of radial distribution systems

International Nuclear Information System (INIS)

Arun, M.; Aravindhababu, P.

2009-01-01

Network reconfiguration is an operation problem, which entails altering the topological structure of the distribution feeders by rearranging the status of switches in order to obtain an optimal configuration in order to minimise the system losses. This paper presents a new reconfiguration algorithm that enhances voltage stability and improves the voltage profile besides minimising losses without incurring any additional cost for installation of capacitors, tap changing transformers and related switching equipment in the distribution system. Test results on a 69 node distribution system reveal the superiority of this algorithm.

A Reconfigurable Buck, Boost, and Buck-Boost Converter: Unified Model and Robust Controller

OpenAIRE

Licea, Martín Antonio Rodríguez; Pinal, Francisco Javier Perez; Gutiérrez, Alejandro Israel Barranco; Ramírez, Carlos Alonso Herrera; Perez, Jose Cruz Nuñez

2018-01-01

The need for reconfigurable, high power density, and low-cost configurations of DC-DC power electronic converters (PEC) in areas such as the transport electrification and the use of renewable energy has spread out the requirement to incorporate in a single circuit several topologies, which generally result in an increment of complexity about the modeling, control, and stability analyses. In this paper, a reconfigurable topology is presented which can be applied in alterative/changing power co...

Fully reconfigurable 2x2 optical cross-connect using tunable wavelength switching modules

DEFF Research Database (Denmark)

Liu, Fenghai; Zheng, Xueyan; Pedersen, Rune Johan Skullerud

2001-01-01

A modular tunable wavelength switching module is proposed and used to construct 2x2 fully reconfigurable optical cross-connects. Large size optical switch is avoided in the OXC and it is easy to upgrade to more wavelength channels.......A modular tunable wavelength switching module is proposed and used to construct 2x2 fully reconfigurable optical cross-connects. Large size optical switch is avoided in the OXC and it is easy to upgrade to more wavelength channels....

Who Serves? The American All-Volunteer Force

DEFF Research Database (Denmark)

Schaub Jr, Gary John; Lowther, Adam

2012-01-01

of demographics, socio-economic origin, and ideology? Or would the force become increasingly separate and alienated from American society, maneuver to become politically independent from civil authority, and perhaps endanger the polity? We address these issues by discussing the underlying choice made by the U...... force by the leadership of the Department of Defense....

Reconfigurable Magneto-Electric Dipole Antennas for Base Stations in Modern Wireless Communication Systems

Directory of Open Access Journals (Sweden)

Lei Ge

2018-01-01

Full Text Available Magneto-electric (ME dipole antennas, with the function of changing the antenna characteristics, such as frequency, polarization, or radiation patterns, are reviewed in this paper. The reconfigurability is achieved by electrically altering the states of diodes or varactors to change the surface currents distributions or reflector size of the antenna. The purpose of the designs is to obtain agile antenna characteristics together with good directive radiation performances, such as low cross-polarization level, high front-to-back ratio, and stable gain. By reconfiguring the antenna capability to support more than one wireless frequency standard, switchable polarizations, or cover tunable areas, the reconfigurable ME dipole antennas are able to switch functionality as the mission changes. Therefore, it can help increase the communication efficiency and reduce the construction cost. This shows very attractive features in base station antennas of modern wireless communication applications.

Distributed reconfigurable control strategies for switching topology networked multi-agent systems.

Science.gov (United States)

Gallehdari, Z; Meskin, N; Khorasani, K

2017-11-01

In this paper, distributed control reconfiguration strategies for directed switching topology networked multi-agent systems are developed and investigated. The proposed control strategies are invoked when the agents are subject to actuator faults and while the available fault detection and isolation (FDI) modules provide inaccurate and unreliable information on the estimation of faults severities. Our proposed strategies will ensure that the agents reach a consensus while an upper bound on the team performance index is ensured and satisfied. Three types of actuator faults are considered, namely: the loss of effectiveness fault, the outage fault, and the stuck fault. By utilizing quadratic and convex hull (composite) Lyapunov functions, two cooperative and distributed recovery strategies are designed and provided to select the gains of the proposed control laws such that the team objectives are guaranteed. Our proposed reconfigurable control laws are applied to a team of autonomous underwater vehicles (AUVs) under directed switching topologies and subject to simultaneous actuator faults. Simulation results demonstrate the effectiveness of our proposed distributed reconfiguration control laws in compensating for the effects of sudden actuator faults and subject to fault diagnosis module uncertainties and unreliabilities. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

A Novel Class of Reconfigurable Spherical Fermat Spiral Multi-port Antennas

Science.gov (United States)

Caratelli, D.; Yarovoy, A.; Haider, N.

Reconfigurability in antenna systems is a desired characteristic that has attracted attention in the past years. In this work, a novel class of spherical Fermat spiral multi-port antennas for next-generation wireless communications and radar applications is presented. The device modelling is carried out by using a computationally enhanced locally conformal finite-difference time-domain full-wave procedure. In this way, the circuital characteristics and radiation properties of the antennas are investigated accurately. The structure reconfigurability, in terms of frequency of operation and radiation efficiency, is technically performed by a suitable solid-state tuning circuitry adopted to properly change the feeding/loading conditions at the input ports of the antenna.

Enhanced situation awareness and decision making for an intelligent reconfigurable reactor power controller

International Nuclear Information System (INIS)

Kenney, S.J.; Edwards, R.M.

1996-01-01

A Learning Automata based intelligent reconfigurable controller has been adapted for use as a reactor power controller to achieve improved reactor temperature performance. The intelligent reconfigurable controller is capable of enforcing either a classical or an optimal reactor power controller based on control performance feedback. Four control performance evaluation measures: dynamically estimated average quadratic temperature error, power, rod reactivity and rod reactivity rate were developed to provide feedback to the control decision component of the intelligent reconfigurable controller. Fuzzy Logic and Neural Network controllers have been studied for inclusion in the bank of controllers that form the intermediate level of an enhanced intelligent reconfigurable reactor power controller (IRRPC). The increased number of alternatives available to the supervisory level of the IRRPC requires enhanced situation awareness. Additional performance measures have been designed and a method for synthesizing them into a single indication of the overall performance of the currently enforced reactor power controller has been conceptualized. Modification of the reward/penalty scheme implemented in the existing IRRPC to increase the quality of the supervisory level decision process has been studied. The logogen model of human memory (Morton, 1969) and individual controller design information could be used to allocate reward to the most appropriate controller. Methods for allocating supervisory level attention were also studied with the goal of maximizing learning rate

Reconfigurable Braille display with phase change locking

Science.gov (United States)

Soule, Cody W.; Lazarus, Nathan

2016-07-01

Automatically updated signs and displays for sighted people are common in today’s world. However, there is no cheap, low power equivalent available for the blind. This work demonstrates a reconfigurable Braille cell using the solid-to-liquid phase change of a low melting point alloy as a zero holding power locking mechanism. The device is actuated with the alloy in the liquid state, and is then allowed to solidify to lock the Braille dot in the actuated position. A low-cost manufacturing process is developed that includes molding of a rigid silicone to create pneumatic channels, and bonding of a thin membrane of a softer silicone on the surface for actuation. A plug of Field’s metal (melting point 62 °C) is placed in the pneumatic channels below each Braille dot to create the final device. The device is well suited for low duty cycle operation in applications such as signs, and is able to maintain its state indefinitely without additional power input. The display requires a pneumatic pressure of only 24 kPa for actuation, and reconfiguration has been demonstrated in less than a minute and a half.

Gravitational Forces in the Spatial Impacts of Urban Sprawl

NARCIS (Netherlands)

de Noronha Vaz, E.; Nijkamp, P.

2015-01-01

Urban sprawl has become an increasing concern in Europe, given the abandonment of rural areas and loss of natural landscapes. In southern Europe remarkable changes have been witnessed in the last few decades concerning land-use and socio-economic growth. Much of this change has had an impact on the

THE ROLE OF SOCIO-ECONOMIC ASPECTS OF WOMEN ON INFANT MORTALITY: A PANEL DATA ANALYSES FOR OECD COUNTRIES

Directory of Open Access Journals (Sweden)

Murat KÜRKCÜ

2017-12-01

Full Text Available Social and economic development of a nation is often reflected by the existing infant and child mortality rates. In this context, one of the millennium development goals is to reduce infant and child mortalities globally. In particular, women’s socio-economic positions are important variables in explaining infant/child mortality. The correlation between infant/child mortalities and socio-economic positions of women is very strong. This study uses a panel data analysis to measure the effect of labour force participation rate of women on infant/child mortalities. The present article analyzes how women’s socio-economic situations affect infant/child mortality in OECD countries for the era 2000-2014. Our results are statistically significant and also suitable for theoretical expectations. According to our conclusions mortality rates may decline as a result of the increase in labour force participation rates of women. In this context, there is a negative relationship between the labor force participation rate of women and gender inequality. So, as gender inequality decreases, infant/child mortality rates also decrease.

Integrated Reconfigurable High-Voltage Transmitting Circuit for CMUTs

DEFF Research Database (Denmark)

Llimos Muntal, Pere; Larsen, Dennis Øland; Jørgensen, Ivan Harald Holger

2014-01-01

-out and measurements are performed on the integrated circuit. The transmitting circuit is reconfigurable externally making it able to drive a wide variety of CMUTs. The transmitting circuit can generate several pulse shapes, pulse voltages up to 100 V, maximum pulse range of 50 V and frequencies up to 5 MHz. The area...

Analysis of reconfigurable assembly system framing systems in automotive industry

Directory of Open Access Journals (Sweden)

Md Zain Mohamad Zamri

2017-01-01

Full Text Available Current trend in automotive industry shows increasing demand for multiple models with lean production. Prior to that, automotive manufacturing systems evolved from mass production to flexible automation. Material handling systems and equipment in a single assembly line with multiple models require high investment but with low throughput thus making production cost relatively high. Current assembly process of side structure and undercarriage with downtime occurrence during assembly process affecting production performance (quality, cost and delivery. Manufacturing facilities should allow more flexibility and increase intelligence evolving toward novel reconfigurable assembly systems (RAS. RAS is envisaged capable of increasing factor flexibility and responsiveness by incorporating assembly jig, robot and framing, which could be next generation of world class automotive assembly systems. This project research proposes a new methodology of framework reconfigurable assembly systems principles in automotive framing systems i.e. enhance assembly process between side structure assembly and undercarriage assembly which a new RAS is capable to reconfigure the assembly processes of multiple model on a single assembly line. Simulation software (Witness will be used to simulate and validate current and proposed assembly process. RAS is expected to be a solution for rapid change in structure and for a responsively adjustable production capacity. Quality, cost and delivery are production key parameters that can be achieved by implementing RAS.

Rapidly reconfigurable high-fidelity optical arbitrary waveform generation in heterogeneous photonic integrated circuits.

Science.gov (United States)

Feng, Shaoqi; Qin, Chuan; Shang, Kuanping; Pathak, Shibnath; Lai, Weicheng; Guan, Binbin; Clements, Matthew; Su, Tiehui; Liu, Guangyao; Lu, Hongbo; Scott, Ryan P; Ben Yoo, S J

2017-04-17

This paper demonstrates rapidly reconfigurable, high-fidelity optical arbitrary waveform generation (OAWG) in a heterogeneous photonic integrated circuit (PIC). The heterogeneous PIC combines advantages of high-speed indium phosphide (InP) modulators and low-loss, high-contrast silicon nitride (Si3N4) arrayed waveguide gratings (AWGs) so that high-fidelity optical waveform syntheses with rapid waveform updates are possible. The generated optical waveforms spanned a 160 GHz spectral bandwidth starting from an optical frequency comb consisting of eight comb lines separated by 20 GHz channel spacing. The Error Vector Magnitude (EVM) values of the generated waveforms were approximately 16.4%. The OAWG module can rapidly and arbitrarily reconfigure waveforms upon every pulse arriving at 2 ns repetition time. The result of this work indicates the feasibility of truly dynamic optical arbitrary waveform generation where the reconfiguration rate or the modulator bandwidth must exceed the channel spacing of the AWG and the optical frequency comb.

An energy-efficient high-performance processor with reconfigurable data-paths using RSFQ circuits

International Nuclear Information System (INIS)

Takagi, Naofumi

2013-01-01

Highlights: ► An idea of a high-performance computer using RSFQ circuits is shown. ► An outline of processor with reconfigurable data-paths (RDPs) is shown. ► Architectural details of an SFQ-RDP are described. -- Abstract: We show recent progress in our research on an energy-efficient high-performance processor with reconfigurable data-paths (RDPs) using rapid single-flux-quantum (RSFQ) circuits. We mainly describe the architectural details of an RDP implemented using RSFQ circuits. An RDP consists of a lot of floating-point units (FPUs) and operand routing networks (ORNs) which connect the FPUs. We reconfigure the RDP to fit a computation, i.e., a group of floating-point operations, appearing in a ‘for’ loop of programs for numerical computations by setting the route in ORNs before the execution of the loop. In the RDP, a lot of FPUs work in parallel with pipelined fashion, and hence, very high-performance computation is achieved

A Domain-Specific Language for Programming Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh; Christensen, David Johan; Støy, Kasper

2007-01-01

, self-reconfigurable robots, we have developed a declarative, role-based language that allows the programmer to define roles and behavior independently of the concrete physical structure of the robot. Roles are compiled to mobile code fragments that distribute themselves over the physical structure...

A Novel Reconfigurable Logic Unit Based on the DNA-Templated Potassium-Concentration-Dependent Supramolecular Assembly.

Science.gov (United States)

Yang, Chunrong; Zou, Dan; Chen, Jianchi; Zhang, Linyan; Miao, Jiarong; Huang, Dan; Du, Yuanyuan; Yang, Shu; Yang, Qianfan; Tang, Yalin

2018-03-15

Plenty of molecular circuits with specific functions have been developed; however, logic units with reconfigurability, which could simplify the circuits and speed up the information process, are rarely reported. In this work, we designed a novel reconfigurable logic unit based on a DNA-templated, potassium-concentration-dependent, supramolecular assembly, which could respond to the input stimuli of H + and K + . By inputting different concentrations of K + , the logic unit could implement three significant functions, including a half adder, a half subtractor, and a 2-to-4 decoder. Considering its reconfigurable ability and good performance, the novel prototypes developed here may serve as a promising proof of principle in molecular computers. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Practical, redundant, failure-tolerant, self-reconfiguring embedded system architecture

Science.gov (United States)

Klarer, Paul R.; Hayward, David R.; Amai, Wendy A.

2006-10-03

This invention relates to system architectures, specifically failure-tolerant and self-reconfiguring embedded system architectures. The invention provides both a method and architecture for redundancy. There can be redundancy in both software and hardware for multiple levels of redundancy. The invention provides a self-reconfiguring architecture for activating redundant modules whenever other modules fail. The architecture comprises: a communication backbone connected to two or more processors and software modules running on each of the processors. Each software module runs on one processor and resides on one or more of the other processors to be available as a backup module in the event of failure. Each module and backup module reports its status over the communication backbone. If a primary module does not report, its backup module takes over its function. If the primary module becomes available again, the backup module returns to its backup status.

The Robust Control Mixer Module Method for Control Reconfiguration

DEFF Research Database (Denmark)

Yang, Z.; Blanke, M.

1999-01-01

into a LTI dynamical system, and furthermore multiple dynamical control mixer modules can be employed in our consideration. The H_{\\infty} control theory is used for the analysis and design of the robust control mixer modules. Finally, one practical robot arm system as benchmark is used to test the proposed......The control mixer concept is efficient in improving an ordinary control system into a fault tolerant one, especially for these control systems of which the real-time and on-line redesign of the control laws is very difficult. In order to consider the stability, performance and robustness...... of the reconfigurated system simultaneously, and to deal with a more general controller reconfiguration than the static feedback mechanism by using the control mixer approach, the robust control mixer module method is proposed in this paper. The form of the control mixer module extends from a static gain matrix...

Gender Structure and Spatial Organization

Directory of Open Access Journals (Sweden)

Minoosh Sadoughianzadeh

2013-11-01

Full Text Available As a contribution to the widespread debate on the “gender reading” of the “built environment,” this article aims to situate the subject in a new context, the Iranian society. To depict the subject, two distinct traditional architectures of the region, associated with their respective socio-spatial organizations, have been comparatively explored: the “Introvert” and “Extrovert.” These two almost ageless “Introvert” and “Extrovert” architectures, evolved through centuries in different geographical parts of the country, are spatial patterns aptly illustrating how the “gender structure” of each social organization has contributed to the formation of the relevant “physical space” and, further, how the specific “gender relationships” are pertinently structured within each one of the two types of the spaces. Based on a systematic approach and through concentration on the macro-socio-spatial organization, this article is to explore the gender/space associated variations within either of the social systems they belong to. This perspective is particularly instrumental in pinpointing the Introvert and Extrovert architectures in the context of their social organizations and carefully scrutinizing “gender” and “space” categories as systematically integrated variables.

Tradeoffs in process strategy games with application in the WDM reconfiguration problem

DEFF Research Database (Denmark)

Cohen, Nathann; Coudert, David; Mazauric, Dorian

2011-01-01

We consider a variant of the graph searching games that models the routing reconfiguration problem in WDM networks. In the digraph processing game, a team of agents aims at processing, or clearing, the vertices of a digraph D. We are interested in two different measures: (1) the total number...... tradeoffs may happen even for a basic class of digraphs. On the other hand, we exhibit classes of graphs for which good tradeoffs can be achieved. We finally detail the relationship between this game and the routing reconfiguration problem. In particular, we prove that any instance of the processing game, i...

Direct measurements of intermolecular forces by chemical force microscopy

Science.gov (United States)

Vezenov, Dmitri Vitalievich

1999-12-01

Detailed description of intermolecular forces is key to understanding a wide range of phenomena from molecular recognition to materials failure. The unique features of atomic force microscopy (AFM) to make point contact force measurements with ultra high sensitivity and to generate spatial maps of surface topography and forces have been extended to include measurements between well-defined organic molecular groups. Chemical modification of AFM probes with self-assembled monolayers (SAMs) was used to make them sensitive to specific molecular interactions. This novel chemical force microscopy (CFM) technique was used to probe forces between different molecular groups in a range of environments (vacuum, organic liquids and aqueous solutions); measure surface energetics on a nanometer scale; determine pK values of the surface acid and base groups; measure forces to stretch and unbind a short synthetic DNA duplex and map the spatial distribution of specific functional groups and their ionization state. Studies of adhesion forces demonstrated the important contribution of hydrogen bonding to interactions between simple organic functionalities. The chemical identity of the tip and substrate surfaces as well as the medium had a dramatic effect on adhesion between model monolayers. A direct correlation between surface free energy and adhesion forces was established. The adhesion between epoxy polymer and model mixed SAMs varied with the amount of hydrogen bonding component in the monolayers. A consistent interpretation of CFM measurements in polar solvents was provided by contact mechanics models and intermolecular force components theory. Forces between tips and surfaces functionalized with SAMs terminating in acid or base groups depended on their ionization state. A novel method of force titration was introduced for highly local characterization of the pK's of surface functional groups. The pH-dependent changes in friction forces were exploited to map spatially the

Epoxy resin-inspired reconfigurable supramolecular networks

OpenAIRE

Balkenende Diederik; Olson Rebecca; Balog Sandor; Weder Christoph; Montero de Espinosa Lucas

2016-01-01

With the goal to push the mechanical properties of reconfigurable supramolecular polymers toward those of thermoset resins we prepared and investigated a new family of hydrogen bonded polymer networks that are assembled from isophthalic acid terminated oligo(bisphenol A co epichlorohydrin) and different bipyridines. These materials display high storage moduli of up to 3.9 GPa can be disassembled upon heating to form melts with a viscosity of as low as 2.1 Pa·s and fully reassemble upon coolin...

Highly-Integrated, Reconfigurable, Large-Area, Flexible Radar Antenna Arrays, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Reconfigurable antennas are attractive for remote sensing, surveillance and communications, since they enable changes in operating frequency and / or radiation...

Microwave photonic filters using low-cost sources featuring tunability, reconfigurability and negative coefficients.

Science.gov (United States)

Capmany, José; Mora, José; Ortega, Beatriz; Pastor, Daniel

2005-03-07

We propose and experimentally demonstrate two configurations of photonic filters for the processing of microwave signals featuring tunability, reconfigurability and negative coefficients based on the use of low cost optical sources. The first option is a low power configuration based on spectral slicing of a broadband source. The second is a high power configuration based on fixed lasers. Tunability, reconfigurability and negative coefficients are achieved by means of a MEMS cross-connect, a variable optical attenuator array and simple 2x2 switches respectively.

An Interface for a Decentralized 2D Reconfiguration on Xilinx Virtex-FPGAs for Organic Computing

Directory of Open Access Journals (Sweden)

Christian Schuck

2009-01-01

Full Text Available Partial and dynamic online reconfiguration of Field Programmable Gate Arrays (FPGAs is a promising approach to design high adaptive systems with lower power consumption, higher task specific performance, and even build-in fault tolerance. Different techniques and tool flows have been successfully developed. One of them, the two-dimensional partial reconfiguration, based on the Readback-Modify-Writeback method implemented on Xilinx Virtex devices, makes them ideally suited to be used as a hardware platform in future organic computing systems, where a highly adaptive hardware is necessary. In turn, decentralisation, the key property of an organic computing system, is in contradiction with the central nature of the FPGAs configuration port. Therefore, this paper presents an approach that connects the single ICAP port to a network on chip (NoC to provide access for all clients of the network. Through this a virtual decentralisation of the ICAP is achieved. Further true 2-dimensional partial reconfiguration is raised to a higher level of abstraction through a lightweight Readback-Modify-Writeback hardware module with different configuration and addressing modes. Results show that configuration data as well as reconfiguration times could be significantly reduced.

The Reconfigured Body. Human-animal relations in xenotransplantation

Directory of Open Access Journals (Sweden)

Kristofer Hansson

2011-12-01

Full Text Available The article explores issues concerning the reconfiguration of human and animal bodies in modern biotechnology. The examples are based on xenotransplantation: Transplantation of cells, tissue and organs from animals to humans. Three thematic issues that emerged from xenotransplantation research in Sweden in the 1990s and early 2000s are examined in the article. The first issue concerns how the pig was introduced as a donor animal in xenotransplantation and, at the same time, dehumanized in relation to what is human. Baboons and chimpanzees that had previously been used in xenotransplantation now became an ethically problematic choice, and were in stead humanized. The second issue concerns the introduction of transgenic and cloned pigs as commoditized objects. The biotechnological development reconfigured the pig’s cells, tissue and organs to become more human-like. The third issue concerns the risk that pigs contain retrovirus that could infect the transplanted patients. The human body became part of a network of both animal and retrovirus. Boundlessness between human and animal bodies appears in these three thematic phases and is analysed from a cultural perspective.

Optical microassembly platform for constructing reconfigurable microenvironment for biomedical studies

DEFF Research Database (Denmark)

Rodrigo, Peter John; Kelemen, Lóránd; Palima, Darwin

2009-01-01

Cellular development is highly influenced by the surrounding microenvironment. We propose user-reconfigurable microenvironments and bio-compatible scaffolds as an approach for understanding cellular development processes. We demonstrate a model platform for constructing versatile microenvironment...

Investigation of Calibrating Force Transducer Using Sinusoidal Force

International Nuclear Information System (INIS)

Zhang Li; Wang Yu; Zhang Lizhe

2010-01-01

Sinusoidal force calibration method was studied several years before at Physikalisch-Technische Bundesanstalt (PTB). A similar dynamic force calibration system is developed at Changcheng Institute of Metrology and Measurement (CIMM). It uses electro-dynamic shakers to generate dynamic force in the range from 1 N to 20 kN, and heterodyne laser interferometers are used for acceleration measurement. The force transducer to be calibrated is mounted on the shaker, and a mass block is screwed on the top of force transducer, the sinusoidal forces realized by accelerated load masses are traceable to acceleration and mass according to the force definition. The methods of determining Spatial-dependent acceleration on mass block and measuring the end mass of force transducer in dynamic force calibration are discussed in this paper.

Reconfigurable network systems and software-defined networking

OpenAIRE

Zilberman, N.; Watts, P. M.; Rotsos, C.; Moore, A. W.

2015-01-01

Modern high-speed networks have evolved from relatively static networks to highly adaptive networks facilitating dynamic reconfiguration. This evolution has influenced all levels of network design and management, introducing increased programmability and configuration flexibility. This influence has extended from the lowest level of physical hardware interfaces to the highest level of network management by software. A key representative of this evolution is the emergence of software-defined n...

Evaluation of a reconfigurable portable instrument for copper determination based on luminescent carbon dots.

Science.gov (United States)

Salinas-Castillo, Alfonso; Morales, Diego P; Lapresta-Fernández, Alejandro; Ariza-Avidad, María; Castillo, Encarnación; Martínez-Olmos, Antonio; Palma, Alberto J; Capitan-Vallvey, Luis Fermin

2016-04-01

A portable reconfigurable platform for copper (Cu(II)) determination based on luminescent carbon dot (Cdots) quenching is described. The electronic setup consists of a light-emitting diode (LED) as the carbon dot optical exciter and a photodiode as a light-to-current converter integrated in the same instrument. Moreover, the overall analog conditioning is simply performed with one integrated solution, a field-programmable analog array (FPAA), which makes it possible to reconfigure the filter and gain stages in real time. This feature provides adaptability to use the platform as an analytical probe for carbon dots coming from different batches with some variations in luminescence characteristics. The calibration functions obtained that fit a modified Stern-Volmer equation were obtained using luminescence signals from Cdots quenching by Cu(II). The analytical applicability of the reconfigurable portable instrument for Cu(II) using Cdots has been successfully demonstrated in tap water analysis.

Reconfiguration of sustainable thermoelectric generation using wireless sensor network

DEFF Research Database (Denmark)

Chen, Min

2014-01-01

wireless sensor networks (WSNs), where remotely deployed temperature and voltage sensors as well as latching relays can be organized as a whole to intelligently identify and execute the optimal interconnection of TEM strings. A reconfigurable TEM array with a WSN controller and a maximum power point...

Towards Shop Floor Hardware Reconfiguration for Industrial Collaborative Robots

DEFF Research Database (Denmark)

Schou, Casper; Madsen, Ole

2016-01-01

In this paper we propose a roadmap for hardware reconfiguration of industrial collaborative robots. As a flexible resource, the collaborative robot will often need transitioning to a new task. Our goal is, that this transitioning should be done by the shop floor operators, not highly specialized...

Reconfigurable chaotic logic gates based on novel chaotic circuit

International Nuclear Information System (INIS)

Behnia, S.; Pazhotan, Z.; Ezzati, N.; Akhshani, A.

2014-01-01

Highlights: • A novel method for implementing logic gates based on chaotic maps is introduced. • The logic gates can be implemented without any changes in the threshold voltage. • The chaos-based logic gates may serve as basic components of future computing devices. - Abstract: The logical operations are one of the key issues in today’s computer architecture. Nowadays, there is a great interest in developing alternative ways to get the logic operations by chaos computing. In this paper, a novel implementation method of reconfigurable logic gates based on one-parameter families of chaotic maps is introduced. The special behavior of these chaotic maps can be utilized to provide same threshold voltage for all logic gates. However, there is a wide interval for choosing a control parameter for all reconfigurable logic gates. Furthermore, an experimental implementation of this nonlinear system is presented to demonstrate the robustness of computing capability of chaotic circuits

A Novel Time Synchronization Method for Dynamic Reconfigurable Bus

Directory of Open Access Journals (Sweden)

Zhang Weigong

2016-01-01

Full Text Available UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

Self-sufficiency of an autonomous reconfigurable modular robotic organism

CERN Document Server

Qadir, Raja Humza

2015-01-01

This book describes how the principle of self-sufficiency can be applied to a reconfigurable modular robotic organism. It shows the design considerations for a novel REPLICATOR robotic platform, both hardware and software, featuring the behavioral characteristics of social insect colonies. Following a comprehensive overview of some of the bio-inspired techniques already available, and of the state-of-the-art in re-configurable modular robotic systems, the book presents a novel power management system with fault-tolerant energy sharing, as well as its implementation in the REPLICATOR robotic modules. In addition, the book discusses, for the first time, the concept of “artificial energy homeostasis” in the context of a modular robotic organism, and shows its verification on a custom-designed simulation framework in different dynamic power distribution and fault tolerance scenarios. This book offers an ideal reference guide for both hardware engineers and software developers involved in the design and implem...

The Structure and Dimensional Design of a Reconfigurable PKM

Directory of Open Access Journals (Sweden)

Xiaoqiang Tang

2013-06-01

Full Text Available Parallel Kinematic Machines (PKMs have many advantages and have been widely used in the machine industry. Benefitting from its modular structure, a PKM is more reconfigurable than traditional serial machines. In this paper, a new type of driving strut module and innovative joints are designed for the Reconfigurable Parallel Kinematic Machine (RPKM. The new driving strut module can be changed from linear drive mode to telescopic drive mode easily, and the new spherical joint and universal joint are designed to achieve a large rotation angle. The inverse kinematics problems in relation to the 6-DOF RPKM are analysed, and the Workspace Volume Index (WVI and the Global ConditionIndex (GCI are adopted to design the RPKM. According to the WVI and GCI analysis of the selected parameters for two types of 6-DOF PKM, the dimensional parameters of the RPKM are designed. In the end, the new type of RPKM prototype is built, with which a wax pattern is machined.

Highly Integrated, Reconfigurable, Large-Area, Flexible Radar Antenna Arrays, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Highly-integrated, reconfigurable radar antenna arrays fabricated on flexible substrates offer high functionality in a portable package that can be rolled up and...

Experimental Results of Novel DoA Estimation Algorithms for Compact Reconfigurable Antennas

Directory of Open Access Journals (Sweden)

Henna Paaso

2017-01-01

Full Text Available Reconfigurable antenna systems have gained much attention for potential use in the next generation wireless systems. However, conventional direction-of-arrival (DoA estimation algorithms for antenna arrays cannot be used directly in reconfigurable antennas due to different design of the antennas. In this paper, we present an adjacent pattern power ratio (APPR algorithm for two-port composite right/left-handed (CRLH reconfigurable leaky-wave antennas (LWAs. Additionally, we compare the performances of the APPR algorithm and LWA-based MUSIC algorithms. We study how the computational complexity and the performance of the algorithms depend on number of selected radiation patterns. In addition, we evaluate the performance of the APPR and MUSIC algorithms with numerical simulations as well as with real world indoor measurements having both line-of-sight and non-line-of-sight components. Our performance evaluations show that the DoA estimates are in a considerably good agreement with the real DoAs, especially with the APPR algorithm. In summary, the APPR and MUSIC algorithms for DoA estimation along with the planar and compact LWA layout can be a valuable solution to enhance the performance of the wireless communication in the next generation systems.

Characterization of robotics parallel algorithms and mapping onto a reconfigurable SIMD machine

Science.gov (United States)

Lee, C. S. G.; Lin, C. T.

1989-01-01

The kinematics, dynamics, Jacobian, and their corresponding inverse computations are six essential problems in the control of robot manipulators. Efficient parallel algorithms for these computations are discussed and analyzed. Their characteristics are identified and a scheme on the mapping of these algorithms to a reconfigurable parallel architecture is presented. Based on the characteristics including type of parallelism, degree of parallelism, uniformity of the operations, fundamental operations, data dependencies, and communication requirement, it is shown that most of the algorithms for robotic computations possess highly regular properties and some common structures, especially the linear recursive structure. Moreover, they are well-suited to be implemented on a single-instruction-stream multiple-data-stream (SIMD) computer with reconfigurable interconnection network. The model of a reconfigurable dual network SIMD machine with internal direct feedback is introduced. A systematic procedure internal direct feedback is introduced. A systematic procedure to map these computations to the proposed machine is presented. A new scheduling problem for SIMD machines is investigated and a heuristic algorithm, called neighborhood scheduling, that reorders the processing sequence of subtasks to reduce the communication time is described. Mapping results of a benchmark algorithm are illustrated and discussed.

Basic Algorithms for the Asynchronous Reconfigurable Mesh

Directory of Open Access Journals (Sweden)

Yosi Ben-Asher

2002-01-01

Full Text Available Many constant time algorithms for various problems have been developed for the reconfigurable mesh (RM in the past decade. All these algorithms are designed to work with synchronous execution, with no regard for the fact that large size RMs will probably be asynchronous. A similar observation about the PRAM model motivated many researchers to develop algorithms and complexity measures for the asynchronous PRAM (APRAM. In this work, we show how to define the asynchronous reconfigurable mesh (ARM and how to measure the complexity of asynchronous algorithms executed on it. We show that connecting all processors in a row of an n×n ARM (the analog of barrier synchronization in the APRAM model can be solved with complexity Θ(nlog⁡n. Intuitively, this is average work time for solving such a problem. Next, we describe general a technique for simulating T -step synchronous RM algorithms on the ARM with complexity of Θ(T⋅n2log⁡n. Finally, we consider the simulation of the classical synchronous algorithm for counting the number of non-zero bits in an n bits vector using (k

Dynamic multi-channel TMS with reconfigurable coil.

Science.gov (United States)

Jiang, Ruoli; Jansen, Ben H; Sheth, Bhavin R; Chen, Ji

2013-05-01

Investigations of the causal involvement of particular brain areas and interconnections in behavior require an external stimulation system with reasonable spatio-temporal resolution. Current transcranial magnetic stimulation (TMS) technology is limited to stimulating a single brain area once in a given trial. Here, we present a feasibility study for a novel TMS system based on multi-channel reconfigurable coils. With this hardware, researchers will be able to stimulate multiple brain sites in any temporal order in a trial. The system employs a wire-mesh coil, constructed using x- and y-directional wires. By varying the current direction and/or strength on each wire, we can configure the proposed mesh-wire coil into a standard loop coil and figure-eight coil of varying size. This provides maximum flexibility to the experimenter in that the location and extent of stimulation on the brain surface can be modified depending on experimental requirement. Moreover, one can dynamically and automatically modify the site(s) of stimulation several times within the span of seconds. By pre-storing various sequences of excitation patterns inside a control unit, one can explore the effect of dynamic TMS on behavior, in associative learning, and as rehabilitative therapy. Here, we present a computer simulation and bench experiments that show the feasibility of the dynamically-reconfigurable coil.

Ecosystem service provision in a changing Europe: adapting to the impacts of combined climate and socio-economic change.

Science.gov (United States)

Dunford, Robert W; Smith, Alison C; Harrison, Paula A; Hanganu, Diana

Future patterns of European ecosystem services provision are likely to vary significantly as a result of climatic and socio-economic change and the implementation of adaptation strategies. However, there is little research in mapping future ecosystem services and no integrated assessment approach to map the combined impacts of these drivers. Map changing patterns in ecosystem services for different European futures and (a) identify the role of driving forces; (b) explore the potential influence of different adaptation options. The CLIMSAVE integrated assessment platform is used to map spatial patterns in services (food, water and timber provision, atmospheric regulation, biodiversity existence/bequest, landscape experience and land use diversity) for a number of combined climatic and socio-economic scenarios. Eight adaptation strategies are explored within each scenario. Future service provision (particularly water provision) will be significantly impacted by climate change. Socio-economic changes shift patterns of service provision: more dystopian societies focus on food provision at the expense of other services. Adaptation options offer significant opportunities, but may necessitate trade-offs between services, particularly between agriculture- and forestry-related services. Unavoidable trade-offs between regions (particularly South-North) are also identified in some scenarios. Coordinating adaptation across regions and sectors will be essential to ensure that all needs are met: a factor that will become increasingly pressing under dystopian futures where inter-regional cooperation breaks down. Integrated assessment enables exploration of interactions and trade-offs between ecosystem services, highlighting the importance of taking account of complex cross-sectoral interactions under different future scenarios of planning adaptation responses.

Development of a socio-ecological environmental justice model for watershed-based management

Science.gov (United States)

Sanchez, Georgina M.; Nejadhashemi, A. Pouyan; Zhang, Zhen; Woznicki, Sean A.; Habron, Geoffrey; Marquart-Pyatt, Sandra; Shortridge, Ashton

2014-10-01

The dynamics and relationships between society and nature are complex and difficult to predict. Anthropogenic activities affect the ecological integrity of our natural resources, specifically our streams. Further, it is well-established that the costs of these activities are born unequally by different human communities. This study considered the utility of integrating stream health metrics, based on stream health indicators, with socio-economic measures of communities, to better characterize these effects. This study used a spatial multi-factor model and bivariate mapping to produce a novel assessment for watershed management, identification of vulnerable areas, and allocation of resources. The study area is the Saginaw River watershed located in Michigan. In-stream hydrological and water quality data were used to predict fish and macroinvertebrate measures of stream health. These measures include the Index of Biological Integrity (IBI), Hilsenhoff Biotic Index (HBI), Family IBI, and total number of Ephemeroptera, Plecoptera, and Trichoptera (EPT) taxa. Stream health indicators were then compared to spatially coincident socio-economic data, obtained from the United States Census Bureau (2010), including race, income, education, housing, and population size. Statistical analysis including spatial regression and cluster analysis were used to examine the correlation between vulnerable human populations and environmental conditions. Overall, limited correlation was observed between the socio-economic data and ecological measures of stream health, with the highest being a negative correlation of 0.18 between HBI and the social parameter household size. Clustering was observed in the datasets with urban areas representing a second order clustering effect over the watershed. Regions with the worst stream health and most vulnerable social populations were most commonly located nearby or down-stream to highly populated areas and agricultural lands.

Reconfigurable optical interconnection network for multimode optical fiber sensor arrays

Science.gov (United States)

Chen, R. T.; Robinson, D.; Lu, H.; Wang, M. R.; Jannson, T.; Baumbick, R.

1992-01-01

A single-source, single-detector architecture has been developed to implement a reconfigurable optical interconnection network multimode optical fiber sensor arrays. The network was realized by integrating LiNbO3 electrooptic (EO) gratings working at the Raman Na regime and a massive fan-out waveguide hologram (WH) working at the Bragg regime onto a multimode glass waveguide. The glass waveguide utilized the whole substrate as a guiding medium. A 1-to-59 massive waveguide fan-out was demonstrated using a WH operating at 514 nm. Measured diffraction efficiency of 59 percent was experimentally confirmed. Reconfigurability of the interconnection was carried out by generating an EO grating through an externally applied electric field. Unlike conventional single-mode integrated optical devices, the guided mode demonstrated has an azimuthal symmetry in mode profile which is the same as that of a fiber mode.

Providing Memory Management Abstraction for Self-Reconfigurable Video Processing Platforms

Directory of Open Access Journals (Sweden)

Kurt Franz Ackermann

2009-01-01

Full Text Available This paper presents a concept for an SDRAM controller targeting video processing platforms with dynamically reconfigurable processing units (RPUs. A priority-arbitration algorithm provides the required QoS and supports high bit-rate data streaming of multiple clients. Conforming to common video data structures the controller organizes the memory in partitions, frames, lines, and pixels. The raised level of abstraction drastically reduces the complexity of clients' addressing logic. Its uniform interface structure facilitates instantiations in systems with various clients. In addition to SDRAM controllers for regular applications, special demands of reconfigurable platforms have to be satisfied. The aim of this work is to minimize the number of required bus macros leading to relaxed place and route constraints and reducing the number of critical design paths. A suitable interface protocol is presented, and fundamental implementation issues are outlined.

Reconfigurable terahertz grating with enhanced transmission of TE polarized light

Directory of Open Access Journals (Sweden)

J. W. He

2017-07-01

Full Text Available We demonstrate an optically reconfigurable grating with enhanced transmission of TE-polarized waves in the terahertz (THz waveband. This kind of grating is realized by projecting a grating image onto a thin Si wafer with a digital micromirror device (DMD. The enhanced transmission is caused by a resonance of the electromagnetic fields between the photoexcited strips. The position of the transmission peak shifts with the variation of the period and duty cycle of the photoinduced grating, which can be readily controlled by the DMD. Furthermore, a flattened Gaussian model was applied to describe the distribution of the photoexcited free carriers in the Si wafer, and the simulated transmittance spectra are shown to be in good agreement with the experimental results. In future, the photoexcited carriers could also be used to produce THz diffractive elements with reconfigurable functionality.

Toward a Reconfigurable MIMO Downlink Air Interface and Radio Resource Management

DEFF Research Database (Denmark)

Kovacs, Istvan Zsolt; Luis, Garcia Ordonez; Ferrández, Miguel Navarro

2010-01-01

This article presents a reconfigurable multiple-input multiple-output air interface design combined with radio resource management algorithms applicable to multi-user MIMO transmission in downlink orthogonal frequency-division multiple access systems. A low-complexity, adaptive, and channel...... scheduling. System-level performance analysis, including the effects of limited and imperfect feedback from the terminals, shows that the SURFACE air interface provides an attractive practical solution for operations with high-rate adaptive MIMO transmission schemes in the context of next-generation wireless......-aware single-user and multi-user MIMO transmission solution is proposed based on the findings of the SURFACE European Commission funded research project. The resulting cross-layer design covers the reconfigurable air interface, and practical layer 1 and layer 2 RRM mechanisms for time-frequency packet...

Recent Developments of Reflectarray Antennas for Reconfigurable Beams Using Surface-Mounted RF-MEMS

Directory of Open Access Journals (Sweden)

Eduardo Carrasco

2012-01-01

Full Text Available Some of the most recent developments in reconfigurable reflectarrays using surface-mounted RF-MEMS, which have been developed at the Universidad Politécnica de Madrid, are summarized in this paper. The results include reconfigurable elements based on patches aperture-coupled to delay lines in two configurations: single elements and gathered elements which form subarrays with common phase control. The former include traditional aperture-coupled elements and a novel wideband reflectarray element which has been designed using two stacked patches. The latter are proposed as a low cost solution for reducing the number of electronic control devices as well as the manufacturing complexity of large reflectarrays. The main advantages and drawbacks of the grouping are evaluated in both pencil and shaped-beam antennas. In all the cases, the effects of the MEMS switches and their assembly circuitry are evaluated when they are used in a 2-bit phase shifter which can be extended to more bits, demonstrating that the proposed elements can be used efficiently in reconfigurable-beam reflectarrays.

SEMICONDUCTOR INTEGRATED CIRCUITS: A reconfigurable analog baseband circuit for WLAN, WCDMA, and Bluetooth

Science.gov (United States)

Tao, Tong; Baoyong, Chi; Ziqiang, Wang; Ying, Zhang; Hanjun, Jiang; Zhihua, Wang

2010-05-01

A reconfigurable analog baseband circuit for WLAN, WCDMA, and Bluetooth in 0.35 μm CMOS is presented. The circuit consists of two variable gain amplifiers (VGA) in cascade and a Gm-C elliptic low-pass filter (LPF). The filter-order and the cut-off frequency of the LPF can be reconfigured to satisfy the requirements of various applications. In order to achieve the optimum power consumption, the bandwidth of the VGAs can also be dynamically reconfigured and some Gm cells can be cut off in the given application. Simulation results show that the analog baseband circuit consumes 16.8 mW for WLAN, 8.9 mW for WCDMA and only 6.5 mW for Bluetooth, all with a 3 V power supply. The analog baseband circuit could provide -10 to +40 dB variable gain, third-order low pass filtering with 1 MHz cut-off frequency for Bluetooth, fourth-order low pass filtering with 2.2 MHz cut-off frequency for WCDMA, and fifth-order low pass filtering with 11 MHz cut-off frequency for WLAN, respectively.

Radiation Resistant, Reconfigurable, Shape Memory Metal Rubber Space Arrays, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NanoSonic has demonstrated that Shape Memory Metal RubberTM (SM-MR) adaptive skins exhibit reconfigurable and durable RF properties. It is hypothesized that such...

Reconfigurable Boolean logic using magnetic single-electron transistors

Czech Academy of Sciences Publication Activity Database

Gonzalez-Zalba, M.F.; Ciccarelli, C.; Zarbo, Liviu; Irvine, A.C.; Campion, R.C.; Gallagher, B. L.; Jungwirth, Tomáš; Ferguson, A.J.; Wunderlich, Joerg

2015-01-01

Roč. 10, č. 4 (2015), e0125142 E-ISSN 1932-6203 R&D Projects: GA MŠk(CZ) LM2011026; GA ČR GB14-37427G EU Projects: European Commission(XE) 268066 - 0MSPIN Institutional support: RVO:68378271 Keywords : single-electron transitor * reconfigurable logic * ferromagnetic semiconductor Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.057, year: 2015

A fuzzy genetic approach for network reconfiguration to enhance voltage stability in radial distribution systems

International Nuclear Information System (INIS)

Sahoo, N.C.; Prasad, K.

2006-01-01

This paper presents a fuzzy genetic approach for reconfiguration of radial distribution systems (RDS) so as to maximize the voltage stability of the network for a specific set of loads. The network reconfiguration involves a mechanism for selection of the best set of branches to be opened, one from each loop, such that the reconfigured RDS possesses desired performance characteristics. This discrete solution space is better handled by the proposed scheme, which maximizes a suitable optimizing function (computed using two different approaches). In the first approach, this function is chosen as the average of a voltage stability index of all the buses in the RDS, while in the second approach, the complete RDS is reduced to a two bus equivalent system and the optimizing function is the voltage stability index of this reduced two bus system. The fuzzy genetic algorithm uses a suitable coding and decoding scheme for maintaining the radial nature of the network at every stage of genetic evolution, and it also uses a fuzzy rule based mutation controller for efficient search of the solution space. This method, tested on 69 bus and 33 bus RDSs, shows promising results for the both approaches. It is also observed that the network losses are reduced when the voltage stability is enhanced by the network reconfiguration

Securing optical code-division multiple-access networks with a postswitching coding scheme of signature reconfiguration

Science.gov (United States)

Huang, Jen-Fa; Meng, Sheng-Hui; Lin, Ying-Chen

2014-11-01

The optical code-division multiple-access (OCDMA) technique is considered a good candidate for providing optical layer security. An enhanced OCDMA network security mechanism with a pseudonoise (PN) random digital signals type of maximal-length sequence (M-sequence) code switching to protect against eavesdropping is presented. Signature codes unique to individual OCDMA-network users are reconfigured according to the register state of the controlling electrical shift registers. Examples of signature reconfiguration following state switching of the controlling shift register for both the network user and the eavesdropper are numerically illustrated. Dynamically changing the PN state of the shift register to reconfigure the user signature sequence is shown; this hinders eavesdroppers' efforts to decode correct data sequences. The proposed scheme increases the probability of eavesdroppers committing errors in decoding and thereby substantially enhances the degree of an OCDMA network's confidentiality.

Reconfigurable digital receiver design and application for instantaneous polarimetric measurement

NARCIS (Netherlands)

Wang, Z.; Krasnov, O.A.; Babur, G.P.; Ligthart, L.P.; Van der Zwan, F.

2011-01-01

This paper presents the development of a reconfigurable receiver to undertake challenging signal processing tasks for a novel polarimetric radar system. The field-programmable gate arrays (FPGAs)-based digital receiver samples incoming signals at intermediate frequency (IF) and processes signals

Architecturally Reconfigurable Development of Mobile Games

DEFF Research Database (Denmark)

Zhang, Weishan

2005-01-01

. Mobile game domain variants could be handled uniformly and traced across all kinds of software assets. The architecture and configuration mechanism in our approach make optimizations that built into meta-components propagated to all product line members. We show this approach with an industrial Role-Playing-Game......Mobile game development must face the problem of multiple hardware and software platforms, which will bring large number of variants. To cut the development and maintenance efforts, in this paper, we present an architecturally reconfigurable software product line approach to develop mobile games...

Software-defined reconfigurable microwave photonics processor.

Science.gov (United States)

Pérez, Daniel; Gasulla, Ivana; Capmany, José

2015-06-01

We propose, for the first time to our knowledge, a software-defined reconfigurable microwave photonics signal processor architecture that can be integrated on a chip and is capable of performing all the main functionalities by suitable programming of its control signals. The basic configuration is presented and a thorough end-to-end design model derived that accounts for the performance of the overall processor taking into consideration the impact and interdependencies of both its photonic and RF parts. We demonstrate the model versatility by applying it to several relevant application examples.

Measuring socio-economic inequality: From dwellers' perspective within Bangalore urban agglomeration

Directory of Open Access Journals (Sweden)

Keya Chakraborty

2015-06-01

Full Text Available Planners and researchers have realized that larger regional framework of urban areas are significant in assessing various inequality aspects in a developing country like India. The framework consists of heterogeneity in spatial and demographic aspects and in quality of socio-economic development levels as well. Against this background, the present paper has proposed a methodological framework to assess socio-economic inequality within Bangalore Urban Agglomeration (BUA as governed by the composite set of Human Development Index (HDI based indicators. Assessments are based on local data of dwellers' preferences on the indicators. On the whole, this paper has tried to establish the significance of application of HDI based indicators in an assessment of socio-economic inequality within BUA. Consequently, the paper has arrived at the need for improvement of comprehensive HDI governed basic public services, amenities, and advanced facilities, across all trans-urban-area levels to ensure a holistic development within BUA.

“Activated, but Stuck”: Applying a Critical Occupational Lens to Examine the Negotiation of Long-Term Unemployment in Contemporary Socio-Political Contexts

Directory of Open Access Journals (Sweden)

Debbie Laliberte Rudman

2016-09-01

Full Text Available Background: Solutions for the problem of long-term unemployment are increasingly shaped by neoliberally-informed logics of activation and austerity. Because the implications of these governing frameworks for everyday life are not well understood, this pilot study applied a critical occupational science perspective to understand how long-term unemployment is negotiated within contemporary North American socio-political contexts. This perspective highlights the implications of policy and employment service re-configurations for the range of activities that constitute everyday life. Methods: Using a collaborative ethnographic community-engaged research approach, we recruited eight people in Canada and the United States who self-identified as experiencing long-term unemployment. We analyzed interviews and observation notes concerning four participants in each context using open coding, critical discourse analysis, and situational analysis. Results: This pilot study revealed a key contradiction in participants’ lives: being “activated, but stuck”. This contradiction resulted from the tension between individualizing, homogenizing frames of unemployment and complex, socio-politically shaped lived experiences. Analysis of this tension revealed how participants saw themselves “doing all the right things” to become re-employed, yet still remained stuck across occupational arenas. Conclusion: This pilot study illustrates the importance of understanding how socio-political solutions to long-term unemployment impact daily life and occupational engagement beyond the realm of job seeking and job acquisition.

Force detection of nuclear magnetic resonance

International Nuclear Information System (INIS)

Rugar, D.; Zueger, O.; Hoen, S.; Yannoni, C.S.; Vieth, H.M.; Kendrick, R.D.

1994-01-01

Micromechanical sensing of magnetic force was used to detect nuclear magnetic resonance with exceptional sensitivity and spatial resolution. With a 900 angstrom thick silicon nitride cantilever capable of detecting subfemtonewton forces, a single shot sensitivity of 1.6 x 10 13 protons was achieved for an ammonium nitrate sample mounted on the cantilever. A nearby millimeter-size iron particle produced a 600 tesla per meter magnetic field gradient, resulting in a spatial resolution of 2.6 micrometers in one dimension. These results suggest that magnetic force sensing is a viable approach for enhancing the sensitivity and spatial resolution of nuclear magnetic resonance microimaging

Towards automatic model based controller design for reconfigurable plants

DEFF Research Database (Denmark)

Michelsen, Axel Gottlieb; Stoustrup, Jakob; Izadi-Zamanabadi, Roozbeh

2008-01-01

This paper introduces model-based Plug and Play Process Control, a novel concept for process control, which allows a model-based control system to be reconfigured when a sensor or an actuator is plugged into a controlled process. The work reported in this paper focuses on composing a monolithic m...

The UK homeowner-retrofitter as an innovator in a socio-technical system

International Nuclear Information System (INIS)

Galvin, Ray; Sunikka-Blank, Minna

2014-01-01

Policy on domestic thermal retrofits is usually designed as a top-down enterprise, setting standards and inducing homeowners to retrofit accordingly. Its underlying assumption is that correct retrofit technology is developed by experts and comes down through supply chains to households, who apply it as designed to their properties. However, this model is challenged by the insight from socio-technical systems studies (STST) that technology and society mutually form and influence each other at every level of society. Using this conceptual framework, this study investigated whether innovations are happening among retrofitting households, and what support these have for diffusion upwards into supply chains and outwards to other households. Qualitative data was gathered through semi-structured interviews among homeowner-retrofitters plus building professionals and citizens' initiatives which support these, in Cambridge, UK. Local innovation was found in the development of new retrofit technology and novel reconfiguring of existing solutions. Much of this was triggered by clashes between standard retrofit solutions and heritage or aesthetic values, economic necessity, or building professionals' lack of knowledge or experience. The findings suggest that instead of treating homeowners as passive recipients, UK thermal retrofit policy should broaden to identify useful innovations developed by homeowners and support them where appropriate. - Highlights: • Technology and innovations for thermal retrofitting are usually seen as top-down. • A socio-technical systems approach reveals a more active role of homeowners. • Interviews show them as innovators, inventors and teachers of retrofit technique. • Policy needs to identify, assess and disseminate appropriate innovations

Reconfigurable logic via gate controlled domain wall trajectory in magnetic network structure

Science.gov (United States)

Murapaka, C.; Sethi, P.; Goolaup, S.; Lew, W. S.

2016-01-01

An all-magnetic logic scheme has the advantages of being non-volatile and energy efficient over the conventional transistor based logic devices. In this work, we present a reconfigurable magnetic logic device which is capable of performing all basic logic operations in a single device. The device exploits the deterministic trajectory of domain wall (DW) in ferromagnetic asymmetric branch structure for obtaining different output combinations. The programmability of the device is achieved by using a current-controlled magnetic gate, which generates a local Oersted field. The field generated at the magnetic gate influences the trajectory of the DW within the structure by exploiting its inherent transverse charge distribution. DW transformation from vortex to transverse configuration close to the output branch plays a pivotal role in governing the DW chirality and hence the output. By simply switching the current direction through the magnetic gate, two universal logic gate functionalities can be obtained in this device. Using magnetic force microscopy imaging and magnetoresistance measurements, all basic logic functionalities are demonstrated. PMID:26839036

DSTATCOM allocation in distribution networks considering reconfiguration using differential evolution algorithm

International Nuclear Information System (INIS)

Jazebi, S.; Hosseinian, S.H.; Vahidi, B.

2011-01-01

Highlights: → Reconfiguration and DSTATCOM allocation are implemented for RDS planning. → Differential evolution algorithm is applied to solve the nonlinear problem. → Optimal status of tie switches, DSTATCOM size and location are determined. → The goal is to minimize network losses and to improve voltage profile. → The results show the effectiveness of the proposed method to satisfy objectives. -- Abstract: The main idea in distribution network reconfiguration is usually to reduce loss by changing the status of sectionalizing switches and determining appropriate tie switches. Recently Distribution FACTS (DFACTS) devices such as DSTATCOM also have been planned for loss reduction and voltage profile improvement in steady state conditions. This paper implements a combinatorial process based on reconfiguration and DSTATCOM allocation in order to mitigate losses and improve voltage profile in power distribution networks. The distribution system tie switches, DSTATCOM location and size have been optimally determined to obtain an appropriate operational condition. Differential evolution algorithm (DEA) has been used to solve and overcome the complicity of this combinatorial nonlinear optimization problem. To validate the accuracy of results a comparison with particle swarm optimization (PSO) has been made. Simulations have been applied on 69 and 83 busses distribution test systems. All optimization results show the effectiveness of the combinatorial approach in loss reduction and voltage profile improvement.

Socio-economic and ecological transformations of the peri-urban region of Gurgaon: an analysis of the trickle-down effect in the post globalization era

Science.gov (United States)

Yadav, A.; Punia, M.

2014-11-01

Economic processes are a manifestation of dynamic complex interdependent array of factors which involves resources, technology and an acting innovative human mind. Production, growth and development are the processes which has vast number of complex drivers, determinants and factors. Innovation, research, diffusion and dissemination are vital instrument of the economic processes of production, which are part of education. Whereas ecological transformations can be corroborated and analyzed by integrating remote sensing based information related to expansion of built-up area beyond city boundaries, extending to peripheries. City reflect economic, environmental, technological and social processes in their change, yet all are in turn profoundly driven by the urban spatial expansion. Metropolitan cities reflects expansion of existing urban and peri-urban areas with a significant socio-ecological transformation in terms of employment, education, and work force participation and land use changes. From the point of view of New Economic Geography (NEG) Theory 2009, the growth dynamic of metros is influenced by their proximity and dependence to a metropolis and the probable spillover effect. Entry point of discussion is the change in production of space in the post globalization era. It attempts to understand city morphology by using remote sensing datasets of LISS IV, IRS-P6 of 5.8 m spatial resolution for 2008 and 2013 and used Gurgaon Municipal Corporation's (GMC) ward boundary to represent socio-political meaning of this expansion and ways of life within the suburb. To understand how city works, detailed analysis related occupational structure, education and informality of ward 31 of Gurgaon and two villages namely Behlpa, Fazalwas and ward 11 of Nuh ( Mewat) along with the village Gabsanpur is attempted as the spatial units of study.

W-Band Real-Time Transmission Utilizing a Reconfigurable RAU for NG-PON Networks

DEFF Research Database (Denmark)

Chorchos, Łukasz; Turkiewicz, Jarosław P.; Rommel, Simon

2016-01-01

In this article, we propose and test a reconfigurable Remote Access Unit (RAU) to interface optical and W-band wireless communication links (75–110 GHz), utilizing optical heterodyne signal upconversion. The RAU is composed of a tunable local oscillator, narrow optical filter and a control unit....... The RAU can be software-reconfigured to select a specific dense wavelength division multiplexed (DWDM) channel. Real-time tests with 100 GHz spaced DWDM signals have been performed. Real-time 2.5 Gbit/s error free radio transmission in the 75 GHz to 95 GHz range of the W-band was achieved after 15 km...

GCPSO in cooperation with graph theory to distribution network reconfiguration for energy saving

International Nuclear Information System (INIS)

Assadian, Mehdi; Farsangi, Malihe M.; Nezamabadi-pour, Hossein

2010-01-01

Network reconfiguration for loss reduction in distribution system is an important way to save energy. This paper investigates the ability of guaranteed convergence particle swarm optimization (GCPSO) and particle swarm optimization (PSO) in cooperation with graph theory for network reconfiguration to reduce the power loss and enhancement of voltage profile of distribution systems. Numerical results of three distribution systems are presented which illustrate the feasibility of the proposed method by GCPSO and PSO using the graph theory. To validate the obtained results, genetic algorithm (GA) using graph theory is also applied and is compared with the proposed GCPSO and PSO using graph theory.

Integrated reconfigurable multiple-input–multiple-output antenna system with an ultra-wideband sensing antenna for cognitive radio platforms

KAUST Repository

Hussain, Rifaqat

2015-06-18

© The Institution of Engineering and Technology 2015. A compact, novel multi-mode, multi-band frequency reconfigurable multiple-input-multiple-output (MIMO) antenna system, integrated with ultra-wideband (UWB) sensing antenna, is presented. The developed model can be used as a complete antenna platform for cognitive radio applications. The antenna system is developed on a single substrate area of dimensions 65 × 120 mm². The proposed sensing antenna is used to cover a wide range of frequency bands from 710 to 3600 MHz. The frequency reconfigurable dual-element MIMO antenna is integrated with P-type, intrinsic, N-type (PIN) diodes for frequency agility. Different modes of selection are used for the MIMO antenna system reconfigurability to support different wireless system standards. The proposed MIMO antenna configuration is used to cover various frequency bands from 755 to 3450 MHz. The complete system comprising the multi-band reconfigurable MIMO antennas and UWB sensing antenna for cognitive radio applications is proposed with a compact form factor.

Socio-economic and environmental effects influencing the development of leprosy in Bahia, north-eastern Brazil.

Science.gov (United States)

Cabral-Miranda, William; Chiaravalloti Neto, Francisco; Barrozo, Ligia V

2014-12-01

To investigate spatial clusters and possible associations between relative risks of leprosy with socio-economic and environmental factors, taking into account diagnosed cases in children under 15 years old. An ecological study was conceived using data aggregated by municipality to identify possible spatial clusters of leprosy from 2005 to 2011. Relative risks were calculated accounting for the respective covariate gender. The second stage of the analysis consisted of verifying possible associations between the relative risks of leprosy as a dependent variable, and socio-economic and environmental variables as independent. This was performed using a multivariate regression analysis according to a previously defined conceptual framework. Overall rates have decreased from 0.88/10 000 in 2005 to 0.52 in 2011. Spatial scan statistics identified 4 high-risk and 6 low-risk clusters. In the regression model, after allowing for spatial dependence, relative risks were associated with higher percentage of water bodies, higher Gini index, higher percentage of urban population, larger average number of dwellers by permanent residence and smaller percentage of residents born in Bahia. Although relative risks of leprosy in Bahia have been decreasing, they remain very high. The association between relative risks of leprosy and water bodies in the proposed geographic scale indicates that hypothesis linking M. leprae and humid environments cannot be discarded. Socio-economic conditions such as inequality, a greater number of dwellers by residence and migration are derived from the urbanisation process carried out in this State. Precarious settlements and poor living conditions in the cities would favour the continuity of leprosy transmission. © 2014 John Wiley & Sons Ltd.

Network topology exploration of mesh-based coarse-grain reconfigurable architectures

NARCIS (Netherlands)

Bansal, N.; Gupta, S.; Dutt, N.D.; Nicolau, A.; Gupta, R.

2004-01-01

Several coarse-grain reconfigurable architectures proposed recently consist of a large number of processing elements (PEs) connected in a mesh-like network topology. We study the effects of three aspects of network topology exploration on the performance of applications on these architectures: (a)

Design and Fabrication of a Reconfigurable MEMS-Based Antenna

KAUST Repository

Martinez, Miguel Angel Galicia

2011-01-01

According to the high gain obtained in a lossy silicon substrate and the compatibility of the custom MEMS process with the state of the art standard CMOS process, it is believed that the design of this antenna can lead to efficient and low cost reconfigurable millimeter-wave System-on-Chip (SoC) solution.

Available Resources for Reconfigurable Systems in 5G Networks

DEFF Research Database (Denmark)

Rodríguez Páez, Juan Sebastián; Vegas Olmos, Juan José

2017-01-01

In this paper, the concept of a Radio-over-Fiber based Centralized Radio Access Network is explained and analyzed, in order to identify a set of resources within the network that can be used as a base in the design of reconfigurable systems. This analysis is then used to design a different reconf...

The Hidden Structure of Organic Informal-like Settlements in Jogjakarta City: An Investigation of Socio-Spatial Relationship in an Urban Kampung

Science.gov (United States)

Hutama, I. A. W.

2018-05-01

Some urban kampungs are registered as informal settlements in Indonesian cities. The existence of a kampung amidst the cities is crucial in providing an affordable access to housing for most of the city’s residents. As an integral part of the city, urban kampungs face many problems such as social segregation, low and deteriorated physical quality, and exclusion from spatial plans which may worsen the residents’ quality of life. Apart from this condition, an urban kampung is believed to have a strong social cohesion and resilient community which are able to persist and survive socially and economically. Towards the sustainability of the city, kampungs as part of the city structure need to be addressed spatially through proper plan and design strategy. In doing so, planners and architects must understand the unique characteristics of urban kampungs to appreciate their positive contribution to the cities. This paper is presented to understand the underlying information on the organic spatial layout of the informal kampung and its impact on social composition within the framework of lively, vibrant, and safe neighborhoods. We utilized Space Syntax (SSX) combined with activity snapshot to understand the socio-spatial relationship and then triangulated the results with a questionnaire on the residents’ perception. Kampung Code, located in the inner city of Yogyakarta, was selected as the case study area as it represents the informal-like settlements. This study revealed that the complex interplays of the organic spatial layout does not significantly affect the frequency of outdoor activities. However, the presence of eight popular spaces (streets, house’s terraces, local shops/taverns, small open spaces, riverbanks, guard posts, community buildings, and small mosques) distributed within Kampung Code does influence it, and it is the driving factor for the residents to engage with others in the form of social interactions. Popular places are able to accommodate

On-line Multiple-model Based Adaptive Control Reconfiguration for a Class of Non-linear Control Systems

DEFF Research Database (Denmark)

Yang, Z.; Izadi-Zamanabadi, R.; Blanke, Mogens

2000-01-01

of LTI models are employed to approximate the faulty, reconfigured and nominal nonlinear systems respectively with respect to the on-line information of the operating system, and a set of compensating modules are proposed and designed so as to make the local LTI model approximating to the reconfigured...... nonlinear system match the corresponding LTI model approximating to the nominal nonlinear system in some optimal sense. The compensating modules are designed by the Pseudo-Inverse Method based on the local LTI models for the nominal and faulty nonlinear systems. Moreover, these modules should update...... corresponding to the updating of local LTI models, which validations are determined by the model approximation errors and the optimal index of local design. The test on a nonlinear ship propulsion system shows the promising potential of this method for system reconfiguration...

5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production

CERN Document Server

2014-01-01

The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing t...

Two Reconfigurable Flight-Control Design Methods: Robust Servomechanism and Control Allocation

Science.gov (United States)

Burken, John J.; Lu, Ping; Wu, Zheng-Lu; Bahm, Cathy

2001-01-01

Two methods for control system reconfiguration have been investigated. The first method is a robust servomechanism control approach (optimal tracking problem) that is a generalization of the classical proportional-plus-integral control to multiple input-multiple output systems. The second method is a control-allocation approach based on a quadratic programming formulation. A globally convergent fixed-point iteration algorithm has been developed to make onboard implementation of this method feasible. These methods have been applied to reconfigurable entry flight control design for the X-33 vehicle. Examples presented demonstrate simultaneous tracking of angle-of-attack and roll angle commands during failures of the fight body flap actuator. Although simulations demonstrate success of the first method in most cases, the control-allocation method appears to provide uniformly better performance in all cases.

Reconfigurable Flight Control Designs With Application to the X-33 Vehicle

Science.gov (United States)

Burken, John J.; Lu, Ping; Wu, Zhenglu

1999-01-01

Two methods for control system reconfiguration have been investigated. The first method is a robust servomechanism control approach (optimal tracking problem) that is a generalization of the classical proportional-plus-integral control to multiple input-multiple output systems. The second method is a control-allocation approach based on a quadratic programming formulation. A globally convergent fixed-point iteration algorithm has been developed to make onboard implementation of this method feasible. These methods have been applied to reconfigurable entry flight control design for the X-33 vehicle. Examples presented demonstrate simultaneous tracking of angle-of-attack and roll angle commands during failures of the right body flap actuator. Although simulations demonstrate success of the first method in most cases, the control-allocation method appears to provide uniformly better performance in all cases.

The socio-rhetorical force of 'truth talk' and lies: The case of 1 John ...

African Journals Online (AJOL)

This article canvassed Greek and Roman sources for discussions concerning truth talk and lies. It has investigated what social historians and/or anthropologists are saying about truth talking and lying and has developed a model that will examine the issue of truth and lying in socio-religious terms as defined by the ...

Building a System of Comparative-Spatial Assessment of the Level of Development of Ukraine and the EU Countries

Directory of Open Access Journals (Sweden)

Bril Mykhailo S.

2018-02-01

Full Text Available The article proposes an approach to the formation of a system of comparative-spatial assessment of the level of socio-economic development of the State, on the basis of which the multidimensional statistical analysis of Ukraine and the EU countries was accomplished. On the basis of the hierarchical agglomerative and iterative methods of the spatial cluster analysis, groups of countries are allocated by homogeneous characteristics of the socio-economic development. A comparison of the results of spatial and dynamic clustering confirms the stability of the composition of the allocated groups and their quality characteristics. The proposed complex of economic and mathematical models for determining the level of socio-economic development of the State and the EU countries on the basis of assessment and analysis of the main macro-indicators and their relationship in the perspective will improve the quality of managerial decisions as to ensuring the socio-economic development of the State.

The introduction of rainbow trout (Oncorhynchus mykiss in the context of socio-spatial Serra Catarinense.

Directory of Open Access Journals (Sweden)

Felipe Luiz

2015-11-01

Full Text Available This article aims to rescue the historical data of the introduction of rainbow trout in the socio-spatial context of the Sierra Santa Catarina, particularly URUBICI / SC municipality. Despite being a kind associated with economic benefits, the process of introduction of trout Oncorhynchus mykiss often has brought environmental and socioeconomic damage whose effects are still unknown. Trout was introduced in Brazil for the first time in 1949 in the Serra da Bocaina (MG and Southeast. The main reasons for its introduction in Brazilian rivers have been the increase in and Rio Macae (RJ in 1952. Currently, the species can now be found in all the states of the South sport fishing and tourism, often on the grounds of alleged lack of other species of fish in the rivers, as happened for example in Sierra Santa Catarina. More recently the Law nº1098 by prohibiting the creation of exotic species in Brazilian rivers included the trout which was later also excluded from this relationship that allowed the creation of this kind continue to occur. Although historically trout has been introduced by government initiative, and the legislation has been lenient, the main supporters of this activity, now are businessmen in the tourist industry and anglers. The trout farming has also been practiced for sale of live specimens, without obtaining the environmental license. Restrictive environmental standards are very recent and little publicized. Impact assessment studies on the native fauna to support educational campaigns and to propose measures for handling and marketing Trout are recommended actions.

Drivers of Change in Socio-Ecological Production Landscapes: Implications for Better Management

Directory of Open Access Journals (Sweden)

Hongyan Gu

2014-03-01

Full Text Available The term socio-ecological production landscapes (SEPLs has recently gained currency in conservation circles because of a recognized need to look beyond protected areas to the management of human-influenced landscapes and ecosystems. We have drawn on a variety of case studies from Asia and other parts of the world to understand the underlying driving forces that have led to the need for greater awareness and sustainable management of SEPLs. We have analyzed the drivers of these changes from socio-political, legal, economic, and socio-cultural perspectives. The analysis shows that SEPLs contribute to local, national, and global economies, and their production and harvesting processes are subject to external demands and pressures. Policy makers should recognize the wide range and diverse values of SEPLs and incorporate these values into broader policy considerations. We have also provided some suggestions for future studies.

Light-Driven Reconfiguration of a Xanthophyll Violaxanthin in the Photosynthetic Pigment-Protein Complex LHCII: A Resonance Raman Study.

Science.gov (United States)

Grudzinski, Wojciech; Janik, Ewa; Bednarska, Joanna; Welc, Renata; Zubik, Monika; Sowinski, Karol; Luchowski, Rafal; Gruszecki, Wieslaw I

2016-05-19

Resonance Raman analysis of the photosynthetic complex LHCII, immobilized in a polyacrylamide gel, reveals that one of the protein-bound xanthophylls, assigned as violaxanthin, undergoes light-induced molecular reconfiguration. The phototransformation is selectively observed in a trimeric structure of the complex and is associated with a pronounced twisting and a trans-cis molecular configuration change of the polyene chain of the carotenoid. Among several spectral effects accompanying the reconfiguration there are ones indicating a carotenoid triplet state. Possible physiological importance of the light-induced violaxanthin reconfiguration as a mechanism associated with making the pigment available for enzymatic deepoxidation in the xanthophyll cycle is discussed.

Reconfigurable Mixed Mode Universal Filter

Directory of Open Access Journals (Sweden)

Neelofer Afzal

2014-01-01

Full Text Available This paper presents a novel mixed mode universal filter configuration capable of working in voltage and transimpedance mode. The proposed single filter configuration can be reconfigured digitally to realize all the five second order filter functions (types at single output port. Other salient features of proposed configuration include independently programmable filter parameters, full cascadability, and low sensitivity figure. However, all these features are provided at the cost of quite large number of active elements. It needs three digitally programmable current feedback amplifiers and three digitally programmable current conveyors. Use of six active elements is justified by introducing three additional reduced hardware mixed mode universal filter configurations and its comparison with reported filters.

Real-time Measurements of an Optical Reconfigurable Radio Access Unit for 5G Wireless Access Networks

DEFF Research Database (Denmark)

Rodríguez, Sebastián; Morales Vicente, Alvaro; Rommel, Simon

2017-01-01

A reconfigurable radio access unit able to switch wavelength, RF carrier frequency and optical path is experimentally demonstrated. The system is able to do the switching processes correctly, while achieving BER values below FEC limit.......A reconfigurable radio access unit able to switch wavelength, RF carrier frequency and optical path is experimentally demonstrated. The system is able to do the switching processes correctly, while achieving BER values below FEC limit....

A fuzzy genetic approach for network reconfiguration to enhance voltage stability in radial distribution systems

Energy Technology Data Exchange (ETDEWEB)

Sahoo, N.C. [Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, Bukit Beruang, 75450 Melaka (Malaysia); Prasad, K. [Faculty of Information Science and Technology, Multimedia University, Jalan Ayer Keroh Lama, Bukit Beruang, 75450 Melaka (Malaysia)

2006-11-15

This paper presents a fuzzy genetic approach for reconfiguration of radial distribution systems (RDS) so as to maximize the voltage stability of the network for a specific set of loads. The network reconfiguration involves a mechanism for selection of the best set of branches to be opened, one from each loop, such that the reconfigured RDS possesses desired performance characteristics. This discrete solution space is better handled by the proposed scheme, which maximizes a suitable optimizing function (computed using two different approaches). In the first approach, this function is chosen as the average of a voltage stability index of all the buses in the RDS, while in the second approach, the complete RDS is reduced to a two bus equivalent system and the optimizing function is the voltage stability index of this reduced two bus system. The fuzzy genetic algorithm uses a suitable coding and decoding scheme for maintaining the radial nature of the network at every stage of genetic evolution, and it also uses a fuzzy rule based mutation controller for efficient search of the solution space. This method, tested on 69 bus and 33 bus RDSs, shows promising results for the both approaches. It is also observed that the network losses are reduced when the voltage stability is enhanced by the network reconfiguration. (author)

Dynamic Output Feedback Based Active Decentralized Fault-Tolerant Control for Reconfigurable Manipulator with Concurrent Failures

Directory of Open Access Journals (Sweden)

Yuanchun Li

2015-01-01

Full Text Available The goal of this paper is to describe an active decentralized fault-tolerant control (ADFTC strategy based on dynamic output feedback for reconfigurable manipulators with concurrent actuator and sensor failures. Consider each joint module of the reconfigurable manipulator as a subsystem, and treat the fault as the unknown input of the subsystem. Firstly, by virtue of linear matrix inequality (LMI technique, the decentralized proportional-integral observer (DPIO is designed to estimate and compensate the sensor fault online; hereafter, the compensated system model could be derived. Then, the actuator fault is estimated similarly by another DPIO using LMI as well, and the sufficient condition of the existence of H∞ fault-tolerant controller in the dynamic output feedback is presented for the compensated system model. Furthermore, the dynamic output feedback controller is presented based on the estimation of actuator fault to realize active fault-tolerant control. Finally, two 3-DOF reconfigurable manipulators with different configurations are employed to verify the effectiveness of the proposed scheme in simulation. The main advantages of the proposed scheme lie in that it can handle the concurrent faults act on the actuator and sensor on the same joint module, as well as there is no requirement of fault detection and isolation process; moreover, it is more feasible to the modularity of the reconfigurable manipulator.

A Reconfigurable Coplanar Waveguide Bowtie Antenna Using an Integrated Ferroelectric Thin-Film Varactor

Directory of Open Access Journals (Sweden)

K. C. Pan

2012-01-01

Full Text Available A novel printed antenna with a frequency reconfigurable feed network is presented. The antenna consists of a bowtie structure patch radiating element in the inner space of an annulus that is on a nongrounded substrate with a ferroelectric (FE Barium Strontium Titanate (BST thin film. The bowtie patch is fed by a coplanar waveguide (CPW transmission line that also includes a CPW-based BST shunt varactor. Reconfiguration of the compact 8 mm × 8 mm system has been demonstrated by shifting the antenna system’s operating frequency 500 MHz in the 7–9 GHz band by applying a DC voltage bias.

The role of NEPA in agency decision-making: Department of Energy reconfiguration programmatic environmental impact statement

International Nuclear Information System (INIS)

Webb, M.D.

1992-01-01

The National Environmental Policy Act (NEPA) was drafted as a decision-making tool to ensure that Federal agencies make open, informed decisions. Equally effective as planning tool, NEPA can be applied to support an agency's planning process while providing requisite environmental analysis of specific proposals. The Department of Energy (DOE) Weapons Complex Reconfiguration Office is preparing a Programmatic Environmental Impact Statement (PEIS) as a means to assist in its long-range planning for the future of the Nation's nuclear weapons complex. The Secretary of Energy has proposed to reconfigure the weapons complex to be smaller, less diverse and more efficient to operate. The Reconfiguration PEIS will analyze the potential environmental impacts of alternative configurations, involving 13 sites in 12 states, and compare these to the current configuration. The Council on Environmental Quality regulations implementing NEPA [40 CFR 1500] provide for Federal agencies to prepare PEISs for broad agency actions, including generically connected actions. Planning for the future weapons complex falls into such a category, involving complex-wide decisions to be made at a national level. DOE's long-range decisions regarding the future of the weapons complex will be based upon environmental considerations as well as other factors such as cost and technical feasibility. The NEPA process will serve to document the identification and analysis of the environmental impacts. In addition, the PEIS will be a key component in developing the Department's Reconfiguration Plan, which will guide the Department in preparing for the future complex. The Reconfiguration Plan will identify follow-on projects needed to implement the programmatic decisions and provide specific guidance for subsequence 'tiered' NEPA analyses

Spatial accessibility to physical activity facilities and to food outlets and overweight in French youth.

Science.gov (United States)

Casey, R; Chaix, B; Weber, C; Schweitzer, B; Charreire, H; Salze, P; Badariotti, D; Banos, A; Oppert, J-M; Simon, C

2012-07-01

Some characteristics of the built environment have been associated with obesity in youth. Our aim was to determine whether individual and environmental socio-economic characteristics modulate the relation between youth overweight and spatial accessibility to physical activity (PA) facilities and to food outlets. Cross-sectional study. 3293 students, aged 12 ± 0.6 years, randomly selected from eastern France middle schools. Using geographical information systems (GIS), spatial accessibility to PA facilities (urban and nature) was assessed using the distance to PA facilities at the municipality level; spatial accessibility to food outlets (general food outlets, bakeries and fast-food outlets) was calculated at individual level using the student home address and the food outlets addresses. Relations of weight status with spatial accessibility to PA facilities and to food outlets were analysed using mixed logistic models, testing potential direct and interaction effects of individual and environmental socio-economic characteristics. Individual socio-economic status modulated the relation between spatial accessibility to PA facilities and to general food outlets and overweight. The likelihood of being overweight was higher when spatial accessibility to urban PA facilities and to general food outlets was low, but in children of blue-collar-workers only. The odds ratio (OR) (95% confidence interval) for being overweight of blue-collar-workers children compared with non-blue-collar-workers children was 1.76 (1.25-2.49) when spatial accessibility to urban PA facilities was low. This OR was 1.86 (1.20-2.86) when spatial accessibility to general food outlets was low. There was no significant relationship of overweight with either nature PA facilities or other food outlets (bakeries and fast-food outlets). These results indicate that disparities in spatial accessibility to PA facilities and to general food outlets may amplify the risk of overweight in socio

DART: A Functional-Level Reconfigurable Architecture for High Energy Efficiency

Directory of Open Access Journals (Sweden)

David Raphaël

2008-01-01

Full Text Available Abstract Flexibility becomes a major concern for the development of multimedia and mobile communication systems, as well as classical high-performance and low-energy consumption constraints. The use of general-purpose processors solves flexibility problems but fails to cope with the increasing demand for energy efficiency. This paper presents the DART architecture based on the functional-level reconfiguration paradigm which allows a significant improvement in energy efficiency. DART is built around a hierarchical interconnection network allowing high flexibility while keeping the power overhead low. To enable specific optimizations, DART supports two modes of reconfiguration. The compilation framework is built using compilation and high-level synthesis techniques. A 3G mobile communication application has been implemented as a proof of concept. The energy distribution within the architecture and the physical implementation are also discussed. Finally, the VLSI design of a 0.13  m CMOS SoC implementing a specialized DART cluster is presented.

DART: A Functional-Level Reconfigurable Architecture for High Energy Efficiency

Directory of Open Access Journals (Sweden)

Sébastien Pillement

2007-12-01

Full Text Available Flexibility becomes a major concern for the development of multimedia and mobile communication systems, as well as classical high-performance and low-energy consumption constraints. The use of general-purpose processors solves flexibility problems but fails to cope with the increasing demand for energy efficiency. This paper presents the DART architecture based on the functional-level reconfiguration paradigm which allows a significant improvement in energy efficiency. DART is built around a hierarchical interconnection network allowing high flexibility while keeping the power overhead low. To enable specific optimizations, DART supports two modes of reconfiguration. The compilation framework is built using compilation and high-level synthesis techniques. A 3G mobile communication application has been implemented as a proof of concept. The energy distribution within the architecture and the physical implementation are also discussed. Finally, the VLSI design of a 0.13 μm CMOS SoC implementing a specialized DART cluster is presented.

Study for urbanization corresponding to socio-economic activities in Savannaket, Laos using satellite remote sensing

International Nuclear Information System (INIS)

Kimijiama, S; Nagai, M

2014-01-01

In Greater Mekong Sub-region (GMS), economic liberalization and deregulation facilitated by GMS Regional Economic Corporation Program (GMS-ECP) has triggered urbanization in the region. However, the urbanization rate and its linkage to socio-economic activities are ambiguous. The objectives of this paper are to: (a) determine the changes in urban area from 1972 to 2013 using remote sensing data, and (b) analyse the relationships between urbanization with respect to socio-economic activities in central Laos. The study employed supervised classification and human visible interpretation to determine changes in urbanization rate. Regression analysis was used to analyze the correlation between the urbanization rate and socio-economic variables. The result shows that the urban area increased significantly from 1972 to 2013. The socio-economic variables such as school enrollment, labour force, mortality rate, water source and sanitation highly correlated with the rate of urbanization during the period. The study concluded that identifying the highly correlated socio-economic variables with urbanization rate could enable us to conduct a further urbanization simulation. The simulation helps in designing policies for sustainable development

Socio Economic Status and Traumatic Brain Injury amongst Pediatric Populations: A Spatial Analysis in Greater Vancouver

Directory of Open Access Journals (Sweden)

Ofer Amram

2015-12-01

Full Text Available Introduction: Within Canada, injuries are the leading cause of death amongst children fourteen years of age and younger, and also one of the leading causes of morbidity. Low Socio Economic Status (SES seems to be a strong indicator of a higher prevalence of injuries. This study aims to identify hotspots for pediatric Traumatic Brain Injury (TBI and examines the relationship between SES and pediatric TBI rates in greater Vancouver, British Columbia (BC, Canada. Methods: Pediatric TBI data from the BC Trauma Registry (BCTR was used to identify all pediatric TBI patients admitted to BC hospitals between the years 2000 and 2013. Spatial analysis was used to identify hotspots for pediatric TBI. Multivariate analysis was used to distinguish census variables that were correlated with rates of injury. Results: Six hundred and fifty three severe pediatric TBI injuries occurred within the BC Lower Mainland between 2000 and 2013. High rates of injury were concentrated in the East, while low rate clusters were most common in the West of the region (more affluent neighborhoods. A low level of education was the main predictor of a high rate of injury (OR = 1.13, 95% CI = 1.03–1.23, p-Value 0.009. Conclusion: While there was a clear relationship between different SES indicators and pediatric TBI rates in greater Vancouver, income-based SES indicators did not serve as good predictors within this region.

Socio-demographic, ecological factors and dengue infection trends in Australia.

Science.gov (United States)

Akter, Rokeya; Naish, Suchithra; Hu, Wenbiao; Tong, Shilu

2017-01-01

Dengue has been a major public health concern in Australia. This study has explored the spatio-temporal trends of dengue and potential socio- demographic and ecological determinants in Australia. Data on dengue cases, socio-demographic, climatic and land use types for the period January 1999 to December 2010 were collected from Australian National Notifiable Diseases Surveillance System, Australian Bureau of Statistics, Australian Bureau of Meteorology, and Australian Bureau of Agricultural and Resource Economics and Sciences, respectively. Descriptive and linear regression analyses were performed to observe the spatio-temporal trends of dengue, socio-demographic and ecological factors in Australia. A total of 5,853 dengue cases (both local and overseas acquired) were recorded across Australia between January 1999 and December 2010. Most the cases (53.0%) were reported from Queensland, followed by New South Wales (16.5%). Dengue outbreak was highest (54.2%) during 2008-2010. A highest percentage of overseas arrivals (29.9%), households having rainwater tanks (33.9%), Indigenous population (27.2%), separate houses (26.5%), terrace house types (26.9%) and economically advantage people (42.8%) were also observed during 2008-2010. Regression analyses demonstrate that there was an increasing trend of dengue incidence, potential socio-ecological factors such as overseas arrivals, number of households having rainwater tanks, housing types and land use types (e.g. intensive uses and production from dryland agriculture). Spatial variation of socio-demographic factors was also observed in this study. In near future, significant increase of temperature was also projected across Australia. The projected increased temperature as well as increased socio-ecological trend may pose a future threat to the local transmission of dengue in other parts of Australia if Aedes mosquitoes are being established. Therefore, upgraded mosquito and disease surveillance at different ports should

[Socio-hydrology: A review].

Science.gov (United States)

Ding, Jing-yi; Zhao, Wen-wu; Fang, Xue-ning

2015-04-01

Socio-hydrology is an interdiscipline of hydrology, nature, society and humanity. It mainly explores the two-way feedbacks of coupled human-water system and its dynamic mechanism of co-evolution, and makes efforts to solve the issues that human faces today such as sustainable utilization of water resources. Starting from the background, formation process, and fundamental concept of socio-hydrology, this paper summarized the features of socio-hydrology. The main research content of socio-hydrology was reduced to three aspects: The tradeoff in coupled human-water system, interests in water resources management and virtual water research in coupled human-water system. And its differences as well as relations with traditional hydrology, eco-hydrology and hydro-sociology were dwelled on. Finally, with hope to promote the development of socio-hydrology researches in China, the paper made prospects for the development of the subject from following aspects: Completing academic content and deepening quantitative research, focusing on scale studies of socio-hydrology, fusing socio-hydrology and eco-hydrology.

DISTRIBUTION NETWORK RECONFIGURATION FOR POWER LOSS MINIMIZATION AND VOLTAGE PROFILE ENHANCEMENT USING ANT LION ALGORITHM

Directory of Open Access Journals (Sweden)

Maryam Shokouhi

2017-06-01

Full Text Available Distribution networks are designed as a ring and operated as a radial form. Therefore, the reconfiguration is a simple and cost-effective way to use existing facilities without the need for any new equipment in distribution networks to achieve various objectives such as: power loss reduction, feeder overload reduction, load balancing, voltage profile improvement, reducing the number of switching considering constraints that ultimately result in the power loss reduction. In this paper, a new method based on the Ant Lion algorithm (a modern meta-heuristic algorithm is provided for the reconfiguration of distribution networks. Considering the extension of the distribution networks and complexity of their communications networks, and the various parameters, using smart techniques is inevitable. The proposed approach is tested on the IEEE 33 & 69-bus radial standard distribution networks. The Evaluation of results in MATLAB software shows the effectiveness of the Ant Lion algorithm in the distribution network reconfiguration.

Optical network scaling: roles of spectral and spatial aggregation.

Science.gov (United States)

Arık, Sercan Ö; Ho, Keang-Po; Kahn, Joseph M

2014-12-01

As the bit rates of routed data streams exceed the throughput of single wavelength-division multiplexing channels, spectral and spatial traffic aggregation become essential for optical network scaling. These aggregation techniques reduce network routing complexity by increasing spectral efficiency to decrease the number of fibers, and by increasing switching granularity to decrease the number of switching components. Spectral aggregation yields a modest decrease in the number of fibers but a substantial decrease in the number of switching components. Spatial aggregation yields a substantial decrease in both the number of fibers and the number of switching components. To quantify routing complexity reduction, we analyze the number of multi-cast and wavelength-selective switches required in a colorless, directionless and contentionless reconfigurable optical add-drop multiplexer architecture. Traffic aggregation has two potential drawbacks: reduced routing power and increased switching component size.

Reconfiguration Techniques for Self-X Power and Performance Management on Xilinx Virtex-II/Virtex-II-Pro FPGAs

Directory of Open Access Journals (Sweden)

Christian Schuck

2011-01-01

Full Text Available Xilinx Virtex-II family FPGAs support an advanced low-skew clock distribution network with numerous global clock nets to support high-speed mixed frequency designs. Digital Clock Managers in combination with Global Clock Buffers are already in place to generate the desired frequency and to drive the clock networks with different sources, respectively. Currently, almost all designs run at a fixed clock frequency determined statically during design time. Such systems cannot take the full advantage of partial and dynamic self-reconfiguration. Therefore, we introduce a new methodology that allows the implemented hardware to dynamically self-adopt the clock frequency during runtime by reconfiguring the Digital Clock Managers. We also present a method for online speed monitoring which is based on a two-dimensional online routing. The created speed maps of the FPGA area can be used as an input for the dynamic frequency scaling. Figures for reconfiguration performance and power savings are given. Further, the tradeoffs for reconfiguration effort using this method are evaluated. Results show the high potential and importance of the distributed dynamic frequency scaling method with little additional overhead.

Principles and applications of force spectroscopy using atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Kyu; Kim, Woong; Park, Joon Won [Dept. of Chemistry, Pohang University of Science and Technology, Pohang (Korea, Republic of)

2016-12-15

Single-molecule force spectroscopy is a powerful technique for addressing single molecules. Unseen structures and dynamics of molecules have been elucidated using force spectroscopy. Atomic force microscope (AFM)-based force spectroscopy studies have provided picoNewton force resolution, subnanometer spatial resolution, stiffness of substrates, elasticity of polymers, and thermodynamics and kinetics of single-molecular interactions. In addition, AFM has enabled mapping the distribution of individual molecules in situ, and the quantification of single molecules has been made possible without modification or labeling. In this review, we describe the basic principles, sample preparation, data analysis, and applications of AFM-based force spectroscopy and its future.

Diferencias innatas y desigualdades socio-espaciales de Calidad de Vida en San Carlos de Bariloche, Argentina = Innate differences and socio-spatial inequalities Quality of Life in San Carlos de Bariloche, Argentina

Directory of Open Access Journals (Sweden)

Carlos Alberto Abaleron

2016-09-01

Full Text Available El propósito del artículo es mostrar cómo diferencias innatas de la población –sexo, edad y lugar de nacimiento- están altamente asociadas con las desigualdades socio-espaciales de Calidad de Vida (CdV de un grupo de barrios de San Carlos de Bariloche, Patagonia Norte de Argentina, entre la crisis económica de 1997 y la recuperación del 2005. El método principal del análisis está basado en el Enfoque integrado de la Pobreza (EIP que mide tanto la pobreza coyuntural (Líneas de Ingreso como la estructural (Necesidades Básicas Insatisfechas, NBI de la población de acuerdo a las mencionadas diferencias del jefe del hogar. Los resultados de las observaciones hechas arrojan, en general, mejoras en el acceso a bienes y servicios debido a ingresos más altos, y reducción en la tasa de desempleo. Sin embargo, esto es menos evidente en aquellos barrios muy pobres que en otros con ausencia de pobrezas, mayores ingresos, más ocupación plena, y altos niveles de instrucción de los jefes de hogares. La interpretación de estos resultados está basada en nuestro enfoque de CdV, el cuál reconoce al conocimiento o imagen del mundo como la principal capacidad para generar libertad de decisión –sujeta a valores y principios universales que nos dicen qué es justo, mejor y bueno- que permite a las personas, grupos y a la sociedad como un todo funcionar y ser. Por el contrario, lo sucedido en Bariloche muestra que la CdV no es la misma para todos, con la creación de verdaderos campos de desigualdades socio-espaciales, con grupos de personas auto encapsulados por decisión propia, simultáneamente con grupos encerrados por el poder de otros dentro de geografías degradadas, con nulos o escasos grados de libertad para oponerse.The purpose of the article is to show how innate differences such as sex, age and birthplace, are strongly associated with socio-spatial inequalities of Quality of Life (Q&L in a group of neighborhoods

Sum-rate analysis of spectrum sharing spatial multiplexing MIMO systems with zero-forcing and multiuser diversity

KAUST Repository

Yang, Liang

2013-06-01

This paper considers a multiuser spectrum sharing (SS) multiple-input multiple-output (MIMO) system with zero-forcing (ZF) operating in a Rayleigh fading environment. We provide an asymptotic sum-rate analysis to investigate the effects of different parameters on the multiuser diversity gain. For a ZF SS spatial multiplexing system with scheduling, the asymptotic sum-rate scales like Nt log2(Q(Nt Np√K - 1)/N t), where Np denotes the number of antennas of primary receiver, Q is the interference temperature, and K represents the number of secondary transmitters. © 2013 IEEE.

Socio-economic problems of returning migrants' reintegration in Georgia

OpenAIRE

TUKHASHVILI, Mirian

2013-01-01

CARIM-East: Creating an Observatory of Migration East of Europe Version in other language: Migration Policy Centre CARIM-East Research Report 2013/11 The present work of research reveals that despite an economic revival, the labour market infrastructure in Georgia and the cost of labour force do not contribute to any reduction in labour emigration. Therefore, great emphasis is placed on the facilitation of return migration back to the homeland and the socio-economic efficiency of ...

A Digital Interface for the Part Designers and the Fixture Designers for a Reconfigurable Assembly System

Directory of Open Access Journals (Sweden)

Vishwa V. Kumar

2013-01-01

Full Text Available This paper presents a web-based framework for interfacing product designers and fixture designers to fetch the benefits of early supplier involvement (ESI to a reconfigurable assembly system (RAS. The interfacing of the two members requires four steps, namely, collaboration chain, fixture supplier selection, knowledge share, and accommodation of service facilities so as to produce multiple products on a single assembly line. The interfacing not only provokes concurrency in the activities of product and fixture designer but also enables the assembly systems to tackle the spatial and generational variety. Among the four stages of interfacing, two steps are characterized by optimization issues, one from the product customer side and the other from the fixture designer side. To impart promptness in the optimization and hence the interaction, computationally economic tools are also presented in the paper for both of the supplier selection and fixture design optimization.

Business Case Analysis: Reconfiguration of the Frederick Memorial Healthcare System Courier Service

National Research Council Canada - National Science Library

Rauch, Nathan C

2008-01-01

This business case projects the likely benefits and costs to Frederick Memorial Hospital that would result from a decision to reconfigure its courier service by way of vehicle diversification and route realignment...

An OFDM receiver implemented on the coarse-grain reconfigurable Montium processor

NARCIS (Netherlands)

Rauwerda, G.K.; Heysters, P.M.; Smit, Gerardus Johannes Maria

Future mobile terminals become multimode communication systems. In order to handle different standards, we propose to perform baseband processing in heterogeneous reconfigurable hardware. OFDM is one of the techniques that exists in multimode communication systems. As an example, we present the

ANALYSIS OF THE SOCIO-ECONOMIC DEVELOPMENT OF UKRAINIAN REGIONS

Directory of Open Access Journals (Sweden)

Оlena Kozyreva

2017-11-01

Full Text Available For a long period of time from 1991 to 2016, the socio-economic development of Ukrainian regions was characterized by enhanced differentiation and persistent inequality. Permanent preservation of the gap between the maximum and minimum values of indicators of socio-economic development of regions, in particular, the GRP per capita (8.8 times in 2014; disposable income of populace (10.3% in 2015; unemployment rate according to ILO methodology (in 2.8 times in January-September 2016, the volume of realized industrial products (38,9 times in January-September 2016 indicate the persistence of centre-periphery relations between regions in the economic space of the country. This situation reduces the overall efficiency of the economy, which is reflected by the decline of Ukraine’s position in the rankings of international organizations. According to the global competitiveness index in 2015, Ukraine has shifted from 76 to 79 place compared with 2014, according to the Index of Human Development, there was a slight increase from 83 to 81 place. To crown it all, taking into account the complexity of modern processes of Ukrainian regions’ socio-economic development, the total assessment of determination of Ukrainian regions’ levels of socio-economic development is required. The purpose of the article implies prompting the research results of determining the problem concerning the consolidated assessment of the socio-economic development of Ukrainian regions. Methodology. The article examines the processes of socio-economic development of Ukrainian regions and offers an analytical scheme of identification stage of problematic of the regions’ socioeconomic development. The article justifies a system of partial indicators and on its basis calculates the integral and generalizing indicators of economic and social development of Ukrainian regions. Analysis of recent researches and publications. Issues of spatial development of the country’s regions

Sustainable Modular Adaptive Redundancy Technique Emphasizing Partial Reconfiguration for Reduced Power Consumption

Directory of Open Access Journals (Sweden)

R. Al-Haddad

2011-01-01

Full Text Available As reconfigurable devices' capacities and the complexity of applications that use them increase, the need for self-reliance of deployed systems becomes increasingly prominent. Organic computing paradigms have been proposed for fault-tolerant systems because they promote behaviors that allow complex digital systems to adapt and survive in demanding environments. In this paper, we develop a sustainable modular adaptive redundancy technique (SMART composed of a two-layered organic system. The hardware layer is implemented on a Xilinx Virtex-4 Field Programmable Gate Array (FPGA to provide self-repair using a novel approach called reconfigurable adaptive redundancy system (RARS. The software layer supervises the organic activities on the FPGA and extends the self-healing capabilities through application-independent, intrinsic, and evolutionary repair techniques that leverage the benefits of dynamic partial reconfiguration (PR. SMART was evaluated using a Sobel edge-detection application and was shown to tolerate stressful sequences of injected transient and permanent faults while reducing dynamic power consumption by 30% compared to conventional triple modular redundancy (TMR techniques, with nominal impact on the fault-tolerance capabilities. Moreover, PR is employed to keep the system on line while under repair and also to reduce repair time. Experiments have shown a 27.48% decrease in repair time when PR is employed compared to the full bitstream configuration case.

A wideband software reconfigurable modem

Science.gov (United States)

Turner, J. H., Jr.; Vickers, H.

A wideband modem is described which provides signal processing capability for four Lx-band signals employing QPSK, MSK and PPM waveforms and employs a software reconfigurable architecture for maximum system flexibility and graceful degradation. The current processor uses a 2901 and two 8086 microprocessors per channel and performs acquisition, tracking, and data demodulation for JITDS, GPS, IFF and TACAN systems. The next generation processor will be implemented using a VHSIC chip set employing a programmable complex array vector processor module, a GP computer module, customized gate array modules, and a digital array correlator. This integrated processor has application to a wide number of diverse system waveforms, and will bring the benefits of VHSIC technology insertion into avionic antijam communications systems.

Organizational Reconfiguration and Strategic Response

DEFF Research Database (Denmark)

Møller Larsen, Marcus; Pedersen, Torben

2014-01-01

this, firms need a high degree of architectural knowledge, which is typically gained through learning by doing. We therefore argue that firms with more offshoring experience are more likely to include organizational objectives in their offshoring strategies. We develop and find support......The purpose of this paper is to investigate the effect of the organizational reconfiguration of offshoring on firms’ strategies. A consequence of offshoring is the need to reintegrate the geographically relocated organizational activities into a coherent organizational architecture. In order to do...... for this hypothesis using a mixed-method approach based on a qualitative case study and comprehensive data from the Offshoring Research Network. These findings contribute to research on the organizational design and architecture of offshoring and the dynamics of organizational architectures....

Spatial Analysis and Safety Assessment of Social and Economic Development of Small and Medium Cities

Directory of Open Access Journals (Sweden)

Elena Anatolyevna Orekhova

2016-12-01

Full Text Available The article discusses the spatial patterns of socio-economic development of small and medium-sized cities in the Volgograd region. We know that small and medium-sized cities as spatial socio-economic systems are not only the support frame of settlement, but the main “engine” of innovative impulses for the surrounding periphery. The scientific novelty of the study consists in the effort to implement a spatial approach to the assessment of the economic security of small and medium-sized cities (SCR. The content of the economic security of cities is determined by two system characteristics of the socio-economic system: economic activity (EA and quality of life (QL of the urban population, or SCR = F (EA; QL. For finding spatial patterns in GIS, great interest is in investigating the environment of each city by calculating the local statistical characteristics of geo-variability which allow assessing trends of spatial variation of the six components of security (human security, technosphere safety, environmental safety, etc., local variations in emissions and their values indicators Ki. The successful solution of these problems is possible with the use of tools of exploratory spatial data analysis (ESDA in ARCGIS, and in particular, the Voronoy maps. The spatial approach has allowed to perform an integrated assessment of the economic security and to evaluate safety risks in small and medium-sized cities of the Volgograd region with the security system of indicators.

Reconfigurable assembly work station

Energy Technology Data Exchange (ETDEWEB)

Lin, Yhu-Tin; Abell, Jeffrey A.; Spicer, John Patrick

2017-11-14

A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table through the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.

Socio-Communication.

Science.gov (United States)

Roth, James David

The focus of this work is the introduction and description of a quasi-new concept called socio-communication. In chapter 1 the term "socio communication" is defined as "human interaction, among and between different classes of people, by means of verbal and nonverbal expression in day-to-day social situations." In chapter 2 social communication…

Place Branding and Strategic Spatial Planning Instrument

NARCIS (Netherlands)

da Silva Oliveira, Eduardo

2013-01-01

Purpose – The purpose of this paper is to bring two literatures into dialogue. The first, is the place branding literature that aims to assert the diversity and complexity of places in pursuit of various economic, political or socio-psychological objectives. The second, is the strategic spatial

Synchronization of faulty processors in coarse-grained TMR protected partially reconfigurable FPGA designs

International Nuclear Information System (INIS)

Kretzschmar, U.; Gomez-Cornejo, J.; Astarloa, A.; Bidarte, U.; Ser, J. Del

2016-01-01

The expansion of FPGA technology in numerous application fields is a fact. Single Event Effects (SEE) are a critical factor for the reliability of FPGA based systems. For this reason, a number of researches have been studying fault tolerance techniques to harden different elements of FPGA designs. Using Partial Reconfiguration (PR) in conjunction with Triple Modular Redundancy (TMR) is an emerging approach in recent publications dealing with the implementation of fault tolerant processors on SRAM-based FPGAs. While these works pay great attention to the repair of erroneous instances by means of reconfiguration, the essential step of synchronizing the repaired processors is insufficiently addressed. In this context, this paper poses four different synchronization approaches for soft core processors, which balance differently the trade-off between synchronization speed and hardware overhead. All approaches are assessed in practice by synchronizing TMR protected PicoBlaze processors implemented on a Virtex-5 FPGA. Nevertheless all methods are of a general nature and can be applied for different processor architectures in a straightforward fashion. - Highlights: • Four different synchronization methods for faulty processors are proposed. • The methods balance between synchronization speed and hardware overhead. • They can be applied to TMR-protected reconfigurable FPGA designs. • The proposed schemes are implemented and tested in real hardware.

Protected Area Reconfiguration Project. Environmental Assessment and Finding of No Significant Impact

International Nuclear Information System (INIS)

1995-12-01

DOE has decided to consolidate, process, and store Category I and II Special Nuclear Material (SNM) in Building 371 at Rocky Flats, in order to improve safeguards and security and to reduce baseline facility and personnel costs. Once all SNM in consolidated into this building, maintaining the full 200-acre protected area would no longer be necessary, and the protected area (PA) could be reconfigured to include only the protection requirements necessary for Building 371. DOE Environmental Assessment 1132 has been written to evaluate options for reconfiguration of the PA; it addressed potential environmental impacts resulting from construction of fence alternatives. Possible routes for the new fence section were examined for environmental impact, feasibility, cost, and complexity. A number of the alternatives, including the proposed action, would impact wetlands

Radiation Mitigation and Power Optimization Design Tools for Reconfigurable Hardware in Orbit

Science.gov (United States)

French, Matthew; Graham, Paul; Wirthlin, Michael; Wang, Li; Larchev, Gregory

2005-01-01

The Reconfigurable Hardware in Orbit (RHinO)project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. In the second year of the project, design tools that leverage an established FPGA design environment have been created to visualize and analyze an FPGA circuit for radiation weaknesses and power inefficiencies. For radiation, a single event Upset (SEU) emulator, persistence analysis tool, and a half-latch removal tool for Xilinx/Virtex-II devices have been created. Research is underway on a persistence mitigation tool and multiple bit upsets (MBU) studies. For power, synthesis level dynamic power visualization and analysis tools have been completed. Power optimization tools are under development and preliminary test results are positive.

Redefining yield gaps at various spatial scales

Science.gov (United States)

Meng, K.; Fishman, R.; Norstrom, A. V.; Diekert, F. K.; Engstrom, G.; Gars, J.; McCarney, G. R.; Sjostedt, M.

2013-12-01

Recent research has highlighted the prevalence of 'yield gaps' around the world and the importance of closing them for global food security. However, the traditional concept of yield gap -defined as the difference between observed and optimal yield under biophysical conditions - omit relevant socio-economic and ecological constraints and thus offer limited guidance on potential policy interventions. This paper proposes alternative definitions of yield gaps by incorporating rich, high resolution, national and sub-national agricultural datasets. We examine feasible efforts to 'close yield gaps' at various spatial scales and across different socio-economic and ecological domains.

Spatial Culture

DEFF Research Database (Denmark)

Reeh, Henrik

2012-01-01

Spatial Culture – A Humanities Perspective Abstract of introductory essay by Henrik Reeh Secured by alliances between socio-political development and cultural practices, a new field of humanistic studies in spatial culture has developed since the 1990s. To focus on links between urban culture...... and modern society is, however, an intellectual practice which has a much longer history. Already in the 1980s, the debate on the modern and the postmodern cited Paris and Los Angeles as spatio-cultural illustrations of these major philosophical concepts. Earlier, in the history of critical studies, the work...... Foucault considered a constitutive feature of 20th-century thinking and one that continues to occupy intellectual and cultural debates in the third millennium. A conceptual framework is, nevertheless, necessary, if the humanities are to adequa-tely address city and space – themes that have long been...

Spatial Modeling for Resources Framework (SMRF): A modular framework for developing spatial forcing data for snow modeling in mountain basins

Science.gov (United States)

Havens, Scott; Marks, Danny; Kormos, Patrick; Hedrick, Andrew

2017-12-01

In the Western US and many mountainous regions of the world, critical water resources and climate conditions are difficult to monitor because the observation network is generally very sparse. The critical resource from the mountain snowpack is water flowing into streams and reservoirs that will provide for irrigation, flood control, power generation, and ecosystem services. Water supply forecasting in a rapidly changing climate has become increasingly difficult because of non-stationary conditions. In response, operational water supply managers have begun to move from statistical techniques towards the use of physically based models. As we begin to transition physically based models from research to operational use, we must address the most difficult and time-consuming aspect of model initiation: the need for robust methods to develop and distribute the input forcing data. In this paper, we present a new open source framework, the Spatial Modeling for Resources Framework (SMRF), which automates and simplifies the common forcing data distribution methods. It is computationally efficient and can be implemented for both research and operational applications. We present an example of how SMRF is able to generate all of the forcing data required to a run physically based snow model at 50-100 m resolution over regions of 1000-7000 km2. The approach has been successfully applied in real time and historical applications for both the Boise River Basin in Idaho, USA and the Tuolumne River Basin in California, USA. These applications use meteorological station measurements and numerical weather prediction model outputs as input. SMRF has significantly streamlined the modeling workflow, decreased model set up time from weeks to days, and made near real-time application of a physically based snow model possible.

Reconfigurable and writable magnetic charge crystals

Science.gov (United States)

Wang, Yong-Lei; Xiao, Zhi-Li; Kwok, Wai-Kwong

2017-07-18

Artificial ices enable the study of geometrical frustration by design and through direct observation. It has, however, proven difficult to achieve tailored long-range ordering of their diverse configurations, limiting both fundamental and applied research directions. An artificial spin structure design is described that produces a magnetic charge ice with tunable long-range ordering of eight different configurations. A technique is also developed to precisely manipulate the local magnetic charge states and demonstrate write-read-erase multi-functionality at room temperature. This globally reconfigurable and locally writable magnetic charge ice provides a setting for designing magnetic monopole defects, tailoring magnetics and controlling the properties of other two-dimensional materials.

Temporal and spatial influences incur reconfiguration of Arctic heathland soil bacterial community structure.

Science.gov (United States)

Hill, Richard; Saetnan, Eli R; Scullion, John; Gwynn-Jones, Dylan; Ostle, Nick; Edwards, Arwyn

2016-06-01

Microbial responses to Arctic climate change could radically alter the stability of major stores of soil carbon. However, the sensitivity of plot-scale experiments simulating climate change effects on Arctic heathland soils to potential confounding effects of spatial and temporal changes in soil microbial communities is unknown. Here, the variation in heathland soil bacterial communities at two survey sites in Sweden between spring and summer 2013 and at scales between 0-1 m and, 1-100 m and between sites (> 100 m) were investigated in parallel using 16S rRNA gene T-RFLP and amplicon sequencing. T-RFLP did not reveal spatial structuring of communities at scales structuring effects may not confound comparison between plot-scale treatments, temporal change is a significant influence. Moreover, the prominence of two temporally exclusive keystone taxa suggests that the stability of Arctic heathland soil bacterial communities could be disproportionally influenced by seasonal perturbations affecting individual taxa. © 2015 Society for Applied Microbiology and John Wiley & Sons Ltd.

Reconfiguring Ethiopia: The Politics of Authoritarian Reform

DEFF Research Database (Denmark)

reconfigured Ethiopian society and state in the past two decades. Yet, as the contributors to this volume demonstrate, ‘democracy’ in Ethiopia has not changed the authority structures and the culture of centralist decision-making of the past. The political system is tightly engineered and controlled from top...... that have marked the Ethiopian polity since the downfall of the socialist Derg regime. Chapters on ethnic federalism, 'revolutionary democracy', opposition parties, the press, the judiciary, state-religion, and state-foreign donor relations provide the most comprehensive and thought-provoking review...

Photonics-assisted wireless link based on mm-wave reconfigurable antennas

DEFF Research Database (Denmark)

Feliciano daCosta, Igor; Cerqueira Sodré, Arismar; Rodriguez Páez, Juan Sebastián

2017-01-01

The authors report a novel concept for photonics-assisted and broadband optical-wireless indoor networks based on optically-controlled reconfigurable antenna arrays (OCRAAs) and photonic down conversion (PDC) techniques, operating in the 28 and 38 GHz frequency bands. The antenna bandwidth is opt...... for access networks in the mm-wave frequency range....

Self-matched high-Q reconfigurable antenna concept for mobile terminals

DEFF Research Database (Denmark)

Bahramzy, Pevand; Jagielski, Ole; Svendsen, Simon

2014-01-01

This study presents reconfigurable antenna design for a front end (FE) that has separate transmit (Tx) and receive (Rx) path. In such an FE, the Tx and Rx antennas can be content with covering only the transmit and receive channels in a frequency band. Therefore they can be quite narrow-band. Nar...

Split and flow: reconfigurable capillary connection for digital microfluidic devices.

Science.gov (United States)

Lapierre, Florian; Harnois, Maxime; Coffinier, Yannick; Boukherroub, Rabah; Thomy, Vincent

2014-09-21

Supplying liquid to droplet-based microfluidic microsystems remains a delicate task facing the problems of coupling continuous to digital or macro- to microfluidic systems. Here, we take advantage of superhydrophobic microgrids to address this problem. Insertion of a capillary tube inside a microgrid aperture leads to a simple and reconfigurable droplet generation setup.

Multi-Cluster Network on a Chip Reconfigurable Radiation Hardened Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The objective of the Phase-I research is to architect, model and simulate a multi-cluster Network on a Chip (NoC) reconfigurable Radio in SystemC RTL, with...

A Socio-Technical Analysis of Patient Accessible Electronic Health Records.

Science.gov (United States)

Hägglund, Maria; Scandurra, Isabella

2017-01-01

In Sweden, and internationally, there is a movement towards increased transparency in healthcare including giving patients online access to their electronic health records (EHR). The purpose of this paper is to analyze the Swedish patient accessible EHR (PAEHR) service using a socio-technical framework, to increase the understanding of factors that influence the design, implementation, adoption and use of the service. Using the Sitting and Singh socio-technical framework as a basis for analyzing the Swedish PAEHR system and its context indicated that there are many stakeholders engaged in these types of services, with different driving forces and incentives that may influence the adoption and usefulness of PAEHR services. The analysis was useful in highlighting important areas that need to be further explored in evaluations of PAEHR services, and can act as a guide when planning evaluations of any PAEHR service.

A Universal Concept for Robust Solving of Shortest Path Problems in Dynamically Reconfigurable Graphs

Directory of Open Access Journals (Sweden)

Jean Chamberlain Chedjou

2015-01-01

Full Text Available This paper develops a flexible analytical concept for robust shortest path detection in dynamically reconfigurable graphs. The concept is expressed by a mathematical model representing the shortest path problem solver. The proposed mathematical model is characterized by three fundamental parameters expressing (a the graph topology (through the “incidence matrix”, (b the edge weights (with dynamic external weights’ setting capability, and (c the dynamic reconfigurability through external input(s of the source-destination nodes pair. In order to demonstrate the universality of the developed concept, a general algorithm is proposed to determine the three fundamental parameters (of the mathematical model developed for all types of graphs regardless of their topology, magnitude, and size. It is demonstrated that the main advantage of the developed concept is that arc costs, the origin-destination pair setting, and the graph topology are dynamically provided by external commands, which are inputs of the shortest path solver model. This enables high flexibility and full reconfigurability of the developed concept, without any retraining need. To validate the concept developed, benchmarking is performed leading to a comparison of its performance with the performances of two well-known concepts based on neural networks.

Enhanced Particle Swarm Optimization-Based Feeder Reconfiguration Considering Uncertain Large Photovoltaic Powers and Demands

Directory of Open Access Journals (Sweden)

Ying-Yi Hong

2014-01-01

Full Text Available The Kyoto protocol recommended that industrialized countries limit their green gas emissions in 2012 to 5.2% below 1990 levels. Photovoltaic (PV arrays provide clear and sustainable renewable energy to electric power systems. Solar PV arrays can be installed in distribution systems of rural and urban areas, as opposed to wind-turbine generators, which cause noise in surrounding environments. However, a large PV array (several MW may incur several operation problems, for example, low power quality and reverse power. This work presents a novel method to reconfigure the distribution feeders in order to prevent the injection of reverse power into a substation connected to the transmission level. Moreover, a two-stage algorithm is developed, in which the uncertain bus loads and PV powers are clustered by fuzzy-c-means to gain representative scenarios; optimal reconfiguration is then achieved by a novel mean-variance-based particle swarm optimization. The system loss is minimized while the operational constraints, including reverse power and voltage variation, are satisfied due to the optimal feeder reconfiguration. Simulation results obtained from a 70-bus distribution system with 4 large PV arrays validate the proposed method.

Fluid intellingence and spatial reasoning as predictors of pilot training performance in the South African Air Force (SAAF

Directory of Open Access Journals (Sweden)

François de Kock

2009-04-01

Full Text Available Pilot selection is a form of high-stakes selection due to the massive costs of training, high trainee ability requirements and costly repercussions of poor selection decisions. This criterion-related validation study investigated the predictive ability of fluid intelligence and spatial reasoning in predicting three criteria of pilot training performance, using an accumulated sample of South African Air Force pilots (N = 108. Hierarchical multiple regression analyses with training grade achieved as criterion were performed for each of the phases of training, namely practical flight training, ground school training, and officers’ formative training. Multiple correlations of 0.35 (p 0.05 and 0.23 (p > 0.05 were obtained for flight, ground school and formative training results, respectively. Spatial ability had incremental validity over fluid intelligence for predicting flight training performance.

Design of a real-time open architecture controller for reconfigurable machine tool

CSIR Research Space (South Africa)

Masekamela, I

2008-06-01

Full Text Available requires appropriate business strategies and manufacturing technologies. More recently, the Reconfigurable Manufacturing System (RMS) concept was introduced to respond to this new market oriented manufacturing environment. In terms of design, RMS has a...

ASRC Aerospace Corporation Selects Dynamically Reconfigurable Anadigm(Registered Trademark) FPAA For Advanced Data Acquisition System

Science.gov (United States)

Mata, Carlos T.

2003-01-01

Anadigm(registered trademark) today announced that ASRC Aerospace Corporation has designed Anadigm's dynamically reconfigurable Field Programmable Analog Array (FPAA) technology into an advanced data acquisition system developed under contract for NASA. ASRC Aerospace designed in the Anadigm(registered trademark) FPAA to provide complex analog signal conditioning in its intelligent, self-calibrating, and self-healing advanced data acquisition system (ADAS). The ADAS has potential applications in industrial, manufacturing, and aerospace markets. This system offers highly reliable operation while reducing the need for user interaction. Anadigm(registered trademark)'s dynamically reconfigurable FPAAs can be reconfigured in-system by the designer or on the fly by a microprocessor. A single device can thus be programmed to implement multiple analog functions and/or to adapt on-the-fly to maintain precision operation despite system degradation and aging. In the case of the ASRC advanced data acquisition system, the FPAA helps ensure that the system will continue to operating at 100% functionality despite changes in the environment, component degradation, and/or component failures.

Reconfigurable Environmentally Aware Computing Technology for Earth Observing Systems (7284-060), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Over the past decade, many research groups have developed reconfigurable computing systems built from Field Programmable Gate Arrays (FPGAs) for on-board processing...

Rough terrain motion planning for actively reconfigurable mobile robots

International Nuclear Information System (INIS)

Brunner, Michael

2015-01-01

In the aftermath of the Tohoku earthquake and the nuclear meltdown at the power plant of Fukushima Daiichi in 2011, reconfigurable robots like the iRobot Packbot were deployed. Instead of humans, the robots were used to investigate contaminated areas. Other incidents are the two major earthquakes in Northern Italy in May 2012. Besides many casualties, a large number of historical buildings was severely damaged. Due to the imminent danger of collapse, it was too dangerous for rescue personnel to enter many of the buildings. Therefore, the sites were inspected by reconfigurable robots, which are able to traverse the rubble and debris of the partially destroyed buildings. This thesis develops a navigation system enabling wheeled and tracked robots to safely traverse rough terrain and challenging structures. It consists of a planning mechanism and a controller. The focus of this thesis, however, is on the contribution to motion planning. The planning scheme employs a hierarchical approach to motion planning for actively reconfigurable robots in rough environments. Using a map of the environment the algorithm estimates the traversability under the consideration of uncertainties. Based on this analysis, an initial path search determines an approximate solution with respect to the robot's operating limits.Subsequently, a detailed planning step refines the initial path where it is required. The refinement step considers the robot's actuators and stability in addition to the quantities of the first search. Determining the robot-terrain interaction is very important in rough terrain. This thesis presents two path refinement approaches: a deterministic and a randomized approach. The experimental evaluation investigates the separate components of the planning scheme, the robot-terrain interaction for instance.In simulation as well as in real world experiments the evaluation demonstrates the necessity of such a planning algorithm in rough terrain and it provides

Rough terrain motion planning for actively reconfigurable mobile robots

Energy Technology Data Exchange (ETDEWEB)

Brunner, Michael

2015-02-05

In the aftermath of the Tohoku earthquake and the nuclear meltdown at the power plant of Fukushima Daiichi in 2011, reconfigurable robots like the iRobot Packbot were deployed. Instead of humans, the robots were used to investigate contaminated areas. Other incidents are the two major earthquakes in Northern Italy in May 2012. Besides many casualties, a large number of historical buildings was severely damaged. Due to the imminent danger of collapse, it was too dangerous for rescue personnel to enter many of the buildings. Therefore, the sites were inspected by reconfigurable robots, which are able to traverse the rubble and debris of the partially destroyed buildings. This thesis develops a navigation system enabling wheeled and tracked robots to safely traverse rough terrain and challenging structures. It consists of a planning mechanism and a controller. The focus of this thesis, however, is on the contribution to motion planning. The planning scheme employs a hierarchical approach to motion planning for actively reconfigurable robots in rough environments. Using a map of the environment the algorithm estimates the traversability under the consideration of uncertainties. Based on this analysis, an initial path search determines an approximate solution with respect to the robot's operating limits.Subsequently, a detailed planning step refines the initial path where it is required. The refinement step considers the robot's actuators and stability in addition to the quantities of the first search. Determining the robot-terrain interaction is very important in rough terrain. This thesis presents two path refinement approaches: a deterministic and a randomized approach. The experimental evaluation investigates the separate components of the planning scheme, the robot-terrain interaction for instance.In simulation as well as in real world experiments the evaluation demonstrates the necessity of such a planning algorithm in rough terrain and it provides

Integrative analysis of the Lake Simcoe watershed (Ontario, Canada) as a socio-ecological system.

Science.gov (United States)

Neumann, Alex; Kim, Dong-Kyun; Perhar, Gurbir; Arhonditsis, George B

2017-03-01

Striving for long-term sustainability in catchments dominated by human activities requires development of interdisciplinary research methods to account for the interplay between environmental concerns and socio-economic pressures. In this study, we present an integrative analysis of the Lake Simcoe watershed, Ontario, Canada, as viewed from the perspective of a socio-ecological system. Key features of our analysis are (i) the equally weighted consideration of environmental attributes with socioeconomic priorities and (ii) the identification of the minimal number of key socio-hydrological variables that should be included in a parsimonious watershed management framework, aiming to establish linkages between urbanization trends and nutrient export. Drawing parallels with the concept of Hydrological Response Units, we used Self-Organizing Mapping to delineate spatial organizations with similar socio-economic and environmental attributes, also referred to as Socio-Environmental Management Units (SEMUs). Our analysis provides evidence of two SEMUs with contrasting features, the "undisturbed" and "anthropogenically-influenced", within the Lake Simcoe watershed. The "undisturbed" cluster occupies approximately half of the Lake Simcoe catchment (45%) and is characterized by low landscape diversity and low average population density watershed management practices and provides directions in order to promote environmental programs for lake conservation and to increase public awareness and engagement in stewardship initiatives. Copyright © 2016 Elsevier Ltd. All rights reserved.

Soybean Trade: Balancing Environmental and Socio-Economic Impacts of an Intercontinental Market.

Science.gov (United States)

Boerema, Annelies; Peeters, Alain; Swolfs, Sanne; Vandevenne, Floor; Jacobs, Sander; Staes, Jan; Meire, Patrick

2016-01-01

The trade in soybean, an important animal feed product, exemplifies the environmental and socio-economic impact of global markets and global agricultural policy. This paper analyses the impact of increasing production of soybean in the exporting countries (deforestation and grassland conversion) as well as in importing regions (decrease in permanent grassland by substitution of grass as feed). Ecosystem services monetary values were used to calculate the environmental and socio-economic impact of observed land use changes. This is balanced against the economic value of the global soybean trade. The results prove that consumption choices in one region have real effects on the supply of ecosystem services at a large spatial scale. Conclusively, solutions to make this global market more sustainable are discussed.

Soybean Trade: Balancing Environmental and Socio-Economic Impacts of an Intercontinental Market.

Directory of Open Access Journals (Sweden)

Annelies Boerema

Full Text Available The trade in soybean, an important animal feed product, exemplifies the environmental and socio-economic impact of global markets and global agricultural policy. This paper analyses the impact of increasing production of soybean in the exporting countries (deforestation and grassland conversion as well as in importing regions (decrease in permanent grassland by substitution of grass as feed. Ecosystem services monetary values were used to calculate the environmental and socio-economic impact of observed land use changes. This is balanced against the economic value of the global soybean trade. The results prove that consumption choices in one region have real effects on the supply of ecosystem services at a large spatial scale. Conclusively, solutions to make this global market more sustainable are discussed.

Software-Controlled Dynamically Swappable Hardware Design in Partially Reconfigurable Systems

Directory of Open Access Journals (Sweden)

Huang Chun-Hsian

2008-01-01

Full Text Available Abstract We propose two basic wrapper designs and an enhanced wrapper design for arbitrary digital hardware circuit designs such that they can be enhanced with the capability for dynamic swapping controlled by software. A hardware design with either of the proposed wrappers can thus be swapped out of the partially reconfigurable logic at runtime in some intermediate state of computation and then swapped in when required to continue from that state. The context data is saved to a buffer in the wrapper at interruptible states, and then the wrapper takes care of saving the hardware context to communication memory through a peripheral bus, and later restoring the hardware context after the design is swapped in. The overheads of the hardware standardization and the wrapper in terms of additional reconfigurable logic resources and the time for context switching are small and generally acceptable. With the capability for dynamic swapping, high priority hardware tasks can interrupt low-priority tasks in real-time embedded systems so that the utilization of hardware space per unit time is increased.

Integrated reconfigurable photonic filters based on interferometric fractional Hilbert transforms.

Science.gov (United States)

Sima, C; Cai, B; Liu, B; Gao, Y; Yu, Y; Gates, J C; Zervas, M N; Smith, P G R; Liu, D

2017-10-01

In this paper, we present integrated reconfigurable photonic filters using fractional Hilbert transformers (FrHTs) and optical phase tuning structure within the silica-on-silicon platform. The proposed structure, including grating-based FrHTs, an X-coupler, and a pair of thermal tuning filaments, is fabricated through the direct UV grating writing technique. The thermal tuning effect is realized by the controllable microheaters located on the two arms of the X-coupler. We investigate the 200 GHz maximum bandwidth photonic FrHTs based on apodized planar Bragg gratings, and analyze the reflection spectrum responses. Through device integration and thermal modulation, the device could operate as photonic notch filters with 5 GHz linewidth and controllable single sideband suppression filters with measured 12 dB suppression ratio. A 50 GHz instantaneous frequency measuring system using this device is also schematically proposed and analyzed with potential 3 dB measurement improvement. The device could be configured with these multiple functions according to need. The reconfigurable structure has great potential in ultrafast all-optical signal processing fields.

Virtual network topology reconfiguration based on big data analytics for traffic prediction

OpenAIRE

Morales Alcaide, Fernando; Ruiz Ramírez, Marc; Velasco Esteban, Luis Domingo

2016-01-01

Big data analytics is applied for IP traffic prediction. When the virtual topology needs to be reconfigured, predicted and current traffic matrices are used to find the optimal topology. Exhaustive simulation results reveal large benefits. Peer Reviewed

Urban Land Use Planning Trend and Sustainable Challenges in Socio-Economic Development

Directory of Open Access Journals (Sweden)

Muhammad Yousif Mangi

2018-04-01

Full Text Available Land use planning is a technical approach for developing and managing the land into various public interests to endorse sustainable socio-economic development. This paper focuses on socio-economic problems by improper allocations of urban land uses particularly in vertical development (High rise buildings. Taluka Qasimabad Town was selected as a case study to observe the existing urban land use trends. Spatial and Quantitative data were collected through detailed land use survey and formal interviews. The ArcGIS and SPSS (Statistical Package for Social Science online software were used to analyze spatial and quantitative data. LRM (Linear Regression Model was used for predicting urban land use change particularly in vertical development by the year 2050. In this context, yearly code and land use change variables were applied in LRM to predict land use change since 2007. The results were found that rapid change in land uses occurred in the study area, by which inhabitants are facing problems like privacy, insecurity, property devaluation, and orientation nearby their accommodations. This research can lead to suggest several ways to improve and enhance urban land use planning approaches for betterment of urban communities.

Scenarios of Future Socio-Economics, Energy, Land Use, and Radiative Forcing

Energy Technology Data Exchange (ETDEWEB)

Eom, Jiyong; Moss, Richard H.; Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Dooley, James J.; Kim, Son H.; Kopp, Roberrt; Kyle, G. Page; Luckow, Patrick W.; Patel, Pralit L.; Thomson, Allison M.; Wise, Marshall A.; Zhou, Yuyu

2013-04-13

This chapter explores uncertainty in future scenarios of energy, land use, emissions and radiative forcing that span the range in the literature for radiative forcing, but also consider uncertainty in two other dimensions, challenges to mitigation and challenges to adaptation. We develop a set of six scenarios that we explore in detail including the underlying the context in which they are set, assumptions that drive the scenarios, the Global Change Assessment Model (GCAM), used to produce quantified implications for those assumptions, and results for the global energy and land-use systems as well as emissions, concentrations and radiative forcing. We also describe the history of scenario development and the present state of development of this branch of climate change research. We discuss the implications of alternative social, economic, demographic, and technology development possibilities, as well as potential stabilization regimes for the supply of and demand for energy, the choice of energy technologies, and prices of energy and agricultural commodities. Land use and land cover will also be discussed with the emphasis on the interaction between the demand for bioenergy and crops, crop yields, crop prices, and policy settings to limit greenhouse gas emissions.

Projeto e desenvolvimento de um hardware reconfigurável de criptografia para a transmissão segura de dados

Directory of Open Access Journals (Sweden)

Otávio Souza Martins Gomes

2015-01-01

Full Text Available Neste trabalho serão mostradas algumas conclusões prévias e escolhas realizadas para o desenvolvimento de uma interface de criptografia simétrica, utilizando hardware reconfigurável para a transmissão segura de dados. Os dispositivos reconfiguráveis permitem o desenvolvimento deste hardware de maneira segura e com uma grande flexibilidade, além da possibilidade de realizar algumas alterações com um mínimo de custo e tempo adicionais. Até o momento foram desenvolvidos os modelos para a implementação. O próximo passo será iniciar o desenvolvimento do hardware, que utilizará linguagens de descrição de hardware e Field Programmable Gate Arrays (FPGAs.Palavras-chave: Segurança. FPGA. PSoC. 3DES. VHDL. Design and development of an cryptography reconfigurable hardware for secure data trasmissionABSTRACTThis paper presents some conclusions and choices about the development of a symmetric cryptography reconfigurable hardware interface to allow a safe data communication. Reconfigurable hardwares allow the development of this kind of device with safety and flexibility, and offer the possibility to change some features with low cost and in a fast way. So far, the hardware models and functionalities were developed. The next step is to start the hardware implementation, which will use hardware description languages and FPGAs.Keywords: Security. FPGA. PSoC. 3DES. VHDL.

A New Generation of Telecommunications for Mars: The Reconfigurable Software Radio

Science.gov (United States)

Adams, J.; Horne, W.

2000-01-01

Telecommunications is a critical component for any mission at Mars as it is an enabling function that provides connectivity back to Earth and provides a means for conducting science. New developments in telecommunications, specifically in software - configurable radios, expand the possible approaches for science missions at Mars. These radios provide a flexible and re-configurable platform that can evolve with the mission and that provide an integrated approach to communications and science data processing. Deep space telecommunication faces challenges not normally faced by terrestrial and near-earth communications. Radiation, thermal, highly constrained mass, volume, packaging and reliability all are significant issues. Additionally, once the spacecraft leaves earth, there is no way to go out and upgrade or replace radio components. The reconfigurable software radio is an effort to provide not only a product that is immediately usable in the harsh space environment but also to develop a radio that will stay current as the years pass and technologies evolve.