WorldWideScience

Sample records for smp foam aneurysm

  1. Virtual Treatment of Basilar Aneurysms Using Shape Memory Polymer Foam

    Science.gov (United States)

    Ortega, J.M.; Hartman, J.; Rodriguez, J.N.; Maitland, D.J.

    2013-01-01

    Numerical simulations are performed on patient-specific basilar aneurysms that are treated with shape memory polymer (SMP) foam. In order to assess the post-treatment hemodynamics, two modeling approaches are employed. In the first, the foam geometry is obtained from a micro-CT scan and the pulsatile blood flow within the foam is simulated for both Newtonian and non-Newtonian viscosity models. In the second, the foam is represented as a porous media continuum, which has permeability properties that are determined by computing the pressure gradient through the foam geometry over a range of flow speeds comparable to those of in vivo conditions. Virtual angiography and additional post-processing demonstrate that the SMP foam significantly reduces the blood flow speed within the treated aneurysms, while eliminating the high-frequency velocity fluctuations that are present within the pre-treatment aneurysms. An estimation of the initial locations of thrombus formation throughout the SMP foam is obtained by means of a low fidelity thrombosis model that is based upon the residence time and shear rate of blood. The Newtonian viscosity model and the porous media model capture similar qualitative trends, though both yield a smaller volume of thrombus within the SMP foam. PMID:23329002

  2. Comparison of shape memory polymer foam versus bare metal coil treatments in an in vivo porcine sidewall aneurysm model.

    Science.gov (United States)

    Horn, John; Hwang, Wonjun; Jessen, Staci L; Keller, Brandis K; Miller, Matthew W; Tuzun, Egemen; Hartman, Jonathan; Clubb, Fred J; Maitland, Duncan J

    2017-10-01

    The endovascular delivery of platinum alloy bare metal coils has been widely adapted to treat intracranial aneurysms. Despite the widespread clinical use of this technique, numerous suboptimal outcomes are possible. These may include chronic inflammation, low volume filling, coil compaction, and recanalization, all of which can lead to aneurysm recurrence, need for retreatment, and/or potential rupture. This study evaluates a treatment alternative in which polyurethane shape memory polymer (SMP) foam is used as an embolic aneurysm filler. The performance of this treatment method was compared to that of bare metal coils in a head-to-head in vivo study utilizing a porcine vein pouch aneurysm model. After 90 and 180 days post-treatment, gross and histological observations were used to assess aneurysm healing. At 90 days, the foam-treated aneurysms were at an advanced stage of healing compared to the coil-treated aneurysms and showed no signs of chronic inflammation. At 180 days, the foam-treated aneurysms exhibited an 89-93% reduction in cross-sectional area; whereas coiled aneurysms displayed an 18-34% area reduction. The superior healing in the foam-treated aneurysms at earlier stages suggests that SMP foam may be a viable alternative to current treatment methods. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1892-1905, 2017. © 2016 Wiley Periodicals, Inc.

  3. Ultra Low Density Shape Memory Polymer Foams With Tunable Physicochemical Properties for Treatment of intracranial Aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, Pooja [Texas A & M Univ., College Station, TX (United States)

    2013-12-01

    Shape memory polymers (SMPs) are a rapidly emerging class of smart materials that can be stored in a deformed temporary shape, and can actively return to their original shape upon application of an external stimulus such as heat, pH or light. This behavior is particularly advantageous for minimally invasive biomedical applications comprising embolic/regenerative scaffolds, as it enables a transcatheter delivery of the device to the target site. The focus of this work was to exploit this shape memory behavior of polyurethanes, and develop an efficient embolic SMP foam device for the treatment of intracranial aneurysms.In summary, this work reports a novel family of ultra low density polymer foams which can be delivered via a minimally invasive surgery to the aneurysm site, actuated in a controlled manner to efficiently embolize the aneurysm while promoting physiological fluid/blood flow through the reticulated/open porous structure, and eventually biodegrade leading to complete healing of the vasculature.

  4. Shape-memory polymer foam device for treating aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, Jason M.; Benett, William J.; Small, Ward; Wilson, Thomas S.; Maitland, Duncan J; Hartman, Jonathan

    2017-05-30

    A system for treating an aneurysm in a blood vessel or vein, wherein the aneurysm has a dome, an interior, and a neck. The system includes a shape memory polymer foam in the interior of the aneurysm between the dome and the neck. The shape memory polymer foam has pores that include a first multiplicity of pores having a first pore size and a second multiplicity of pores having a second pore size. The second pore size is larger than said first pore size. The first multiplicity of pores are located in the neck of the aneurysm. The second multiplicity of pores are located in the dome of the aneurysm.

  5. Magnetic Resonance Flow Velocity and Temperature Mapping of a Shape Memory Polymer Foam Device

    Energy Technology Data Exchange (ETDEWEB)

    Small IV, W; Gjersing, E; Herberg, J L; Wilson, T S; Maitland, D J

    2008-10-29

    Interventional medical devices based on thermally responsive shape memory polymer (SMP) are under development to treat stroke victims. The goals of these catheter-delivered devices include re-establishing blood flow in occluded arteries and preventing aneurysm rupture. Because these devices alter the hemodynamics and dissipate thermal energy during the therapeutic procedure, a first step in the device development process is to investigate fluid velocity and temperature changes following device deployment. A laser-heated SMP foam device was deployed in a simplified in vitro vascular model. Magnetic resonance imaging (MRI) techniques were used to assess the fluid dynamics and thermal changes associated with device deployment. Spatial maps of the steady-state fluid velocity and temperature change inside and outside the laser-heated SMP foam device were acquired. Though non-physiological conditions were used in this initial study, the utility of MRI in the development of a thermally-activated SMP foam device has been demonstrated.

  6. Water-Blown Polyurethane Foams Showing a Reversible Shape-Memory Effect

    Directory of Open Access Journals (Sweden)

    Elena Zharinova

    2016-11-01

    Full Text Available Water-blown polyurethane (PU foams are of enormous technological interest as they are widely applied in various fields, i.e., consumer goods, medicine, automotive or aerospace industries. The discovery of the one-way shape-memory effect in PU foams provided a fresh impetus for extensive investigations on porous polymeric actuators over the past decades. High expansion ratios during the shape-recovery are of special interest when big volume changes are required, for example to fill an aneurysm during micro-invasive surgery or save space during transportation. However, the need to program the foams before each operation cycle could be a drawback impeding the entry of shape-memory polymeric (SMP foams to our daily life. Here, we showed that a reversible shape-memory effect (rSME is achievable for polyurethane water-blown semicrystalline foams. We selected commercially available crystallizable poly(ε-caprolactone-diols of different molecular weight for foams synthesis, followed by investigations of morphology, thermal, thermomechanical and shape-memory properties of obtained compositions. Densities of synthesized foams varied from 110 to 180 kg∙m−3, while peak melting temperatures were composition-dependent and changed from 36 to 47 °C, while the melting temperature interval was around 15 K. All semicrystalline foams exhibited excellent one-way SME with shape-fixity ratios slightly above 100% and shape-recovery ratios from the second cycle of 99%. The composition with broad distribution of molecular weights of poly(ε-caprolactone-diols exhibited an rSME of about 12% upon cyclic heating and cooling from Tlow = 10 °C and Thigh = 47 °C. We anticipate that our experimental study opens a field of systematic investigation of rSMEs in porous polymeric materials on macro and micro scale and extend the application of water-blown polyurethane foams to, e.g., protective covers with zero thermal expansion or even cushions adjustable to a certain body

  7. Brain Aneurysm

    Science.gov (United States)

    A brain aneurysm is an abnormal bulge or "ballooning" in the wall of an artery in the brain. They are sometimes called berry aneurysms because they ... often the size of a small berry. Most brain aneurysms produce no symptoms until they become large, ...

  8. Self-fitting shape memory polymer foam inducing bone regeneration: A rabbit femoral defect study.

    Science.gov (United States)

    Xie, Ruiqi; Hu, Jinlian; Hoffmann, Oskar; Zhang, Yuanchi; Ng, Frankie; Qin, Tingwu; Guo, Xia

    2018-04-01

    Although tissue engineering has been attracted greatly for healing of critical-sized bone defects, great efforts for improvement are still being made in scaffold design. In particular, bone regeneration would be enhanced if a scaffold precisely matches the contour of bone defects, especially if it could be implanted into the human body conveniently and safely. In this study, polyurethane/hydroxyapatite-based shape memory polymer (SMP) foam was fabricated as a scaffold substrate to facilitate bone regeneration. The minimally invasive delivery and the self-fitting behavior of the SMP foam were systematically evaluated to demonstrate its feasibility in the treatment of bone defects in vivo. Results showed that the SMP foam could be conveniently implanted into bone defects with a compact shape. Subsequently, it self-matched the boundary of bone defects upon shape-recovery activation in vivo. Micro-computed tomography determined that bone ingrowth initiated at the periphery of the SMP foam with a constant decrease towards the inside. Successful vascularization and bone remodeling were also demonstrated by histological analysis. Thus, our results indicate that the SMP foam demonstrated great potential for bone regeneration. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. The effect of moisture absorption on the physical properties of polyurethane shape memory polymer foams

    International Nuclear Information System (INIS)

    Yu, Ya-Jen; Hearon, Keith; Maitland, Duncan J; Wilson, Thomas S

    2011-01-01

    The effect of moisture absorption on the glass transition temperature (T g ) and the stress/strain behavior of network polyurethane shape memory polymer (SMP) foams has been investigated. With our ultimate goal of engineering polyurethane SMP foams for use in blood-contacting environments, we have investigated the effects of moisture exposure on the physical properties of polyurethane foams. To the best of our knowledge, this study is the first to investigate the effects of moisture absorption at varying humidity levels (non-immersion and immersion) on the physical properties of polyurethane SMP foams. The SMP foams were exposed to differing humidity levels for varying lengths of time, and they exhibited a maximum water uptake of 8.0% (by mass) after exposure to 100% relative humidity for 96 h. Differential scanning calorimetry results demonstrated that water absorption significantly decreased the T g of the foam, with a maximum water uptake shifting the T g from 67 to 5 °C. Samples that were immersed in water for 96 h and immediately subjected to tensile testing exhibited 100% increases in failure strains and 500% decreases in failure stresses; however, in all cases of time and humidity exposure, the plasticization effect was reversible upon placing moisture-saturated samples in 40% humidity environments for 24 h

  10. Brain aneurysm repair

    Science.gov (United States)

    ... aneurysm repair; Dissecting aneurysm repair; Endovascular aneurysm repair - brain; Subarachnoid hemorrhage - aneurysm ... Your scalp, skull, and the coverings of the brain are opened. A metal clip is placed at ...

  11. Bangladesh's SMP earns top marks.

    Science.gov (United States)

    1984-01-01

    A recent evaluation funded by the US Agency for International Development (AID) confirms that Bangladesh's contraceptive social marketing program has exceeded its planner's goals and demonstrated the ability of such a system to widely distribute contraceptive products at a low cost. The project, which began contraceptive sales in 1975, distributes condoms, oral contraceptives, and foaming vaginal tablets. Almost 25% of contraceptive users in Bangladesh are serviced by the social marketing program. By the end of 1983, the program was providing 1,022,000 couple years of protection; this included 84 million condoms, 1.7 million pill cycles, and 5.1 million spermicidal tablets each year. The program's cost for 1 couple year of protection is US$1.66. Social marketing sales have accounted for all increases in couple years of protection experienced by the country's national population program since 1975. Sales have been boosted by recent efforts to draw rural medical practitioners into family planning activities. Mobile film units have further increased sales. The USAID report identifies 3 elements that have spearheaded the social marketing program's achievements: 1) the existence of a committed core management team, 2) the granting of autonomy to make daily decisions to this management team, and 3) central control fo the product distribution system by management rather than by subcontractors. Overall, the social marketing program is credited with legitimizing discussion of contraception in a country formerly considered too conservative to tolerate open product promotion.

  12. Aneurysm Repair

    Science.gov (United States)

    ... the aneurysm. The stent graft acts as a barrier between the blood and the diseased wall of ... Search THI Resources Office of Research Administration Library & Learning Resource Center Scientific Publications & Grants Visual Communications & Public ...

  13. Pengembangan Soal Penalaran Model TIMSS Matematika SMP

    Directory of Open Access Journals (Sweden)

    A. Rizta

    2013-06-01

    Full Text Available Penelitian ini bertujuan mengembangkan soal penalaran model TIMSS pada mata pelajaran matematika SMP. Subjek penelitian adalah siswa kelas VIII.7 SMP Negeri 1 Palembang yang berjumlah 27 orang. Metode penelitian yang digunakan development research atau pengembangan. Hasil penelitian ini menunjukkan bahwa sebanyak 22,22% siswa mendapat skor  penalaran di atas 65%, dan 77,78% siswa memperoleh skor penalaran di bawah 65%. Lebih rinci pencapaian hasil tes penalaran pada domain penalaran generalize 11,11%,  domain penalaran justify 3,7%, domain penalaran integrate 29,63%, domain penalaran analyze 44,45%, dan domain penalaran non-routine problem 51,85%. Berdasarkan hasil tes tersebut, jika acuan batas pencapaian 65% maka  penalaran siswa masih berada di bawah batas pencapaian minimal dengan kata lain kemampuan penalaran siswa masih rendah.   The aim of this research was developing TIMSS reasoning problem on mathematics SMP. Subject of this research was 27 students on VIII.7 SMPN 1 Palembang. This research used development research. The result show that 22,22% students reach above 65% of reasoning problem, and vice versa. More detail result show that 11,11% reached generalize reasoning level, 3,7% reached justify level, 29,63% reached integrate level, 44,45% reached analyze level, and 51,85% reached non-routine problem. Based on the result, if 65% was determined as minimum limit of success, it means the student reasoning ability still low.  

  14. IMPLEMENTASI PENDIDIKAN KARAKTER DI SMP NEGERI 8 DAN SMP NEGERI 9 PURWOKERTO

    Directory of Open Access Journals (Sweden)

    Tutuk Ningsih

    2016-10-01

    Full Text Available Penelitian ini bertujuan untuk menemukan dan mendeskripsikan; (1 implementasi pendidikan karakter (IPK di SMP Negeri 8 dan SMP Negeri 9 Purwokerto; (2 peran kepala sekolah, guru, dan siswa dalam IPK; dan (3 aktualisasi nilai-nilai karakter dalam IPK. Metode yang digunakan dalam penelitian ini merupakan metode kualitatif dengan pendekatan kualitatif-naturalistik.Teknik pengumpulan data yang digunakan adalah pengamatan partisipan, wawancara mendalam, dan dokumentasi. Analisis data menggunakan model interaktif Miles dan Huberman. Berdasarkan hasil penelitian ditarik kesimpulan berikut ini. (1 Implementasi pendidikan karakter yang lakukan melalui pola kegiatan terpadu antara kegiatan intrakurikuler dan ektrakurikuler. (2 Implementasi pendidikan karakter yang dilakukan oleh kepala sekolah, guru, dan siswa mempunyai peranan yang positif dalam pembentukan kultur sekolah yang berkarakter. Peran kepala sekolah, guru, dan siswa dalam IPK diwujudkan dalam: (a peran kepala sekolah sebagai motivator, pemberi contoh keteladanan, pelindung, penggerak kegiatan, perancang kegiatan, pendorong, dan pembimbing; (b peran guru sebagai pendidik, pengasih, dan pengasuh; dan (c peran siswa sebagai subjek didik dan pelaksana kegiatan di sekolah. (3 Aktualisasi nilai-nilai karakter dalam IPK cenderung mengacu pada prinsip ABITA (Aku Bangga Indonesia Tanah Airku berbasis kebangsaan dan religius yang meliputi 18 nilai karakter, yaitu: (a nilai religius, (b kejujuran, (c demokratis, (d tanggungjawab, (e disiplin, (f peduli lingkungan, (g peduli sosial, (h kerja keras, (i mandiri, (j cinta tanah air, (k semangat kebangsaan, (l rasa ingin tahu, (m gemar membaca, (n menghargai prestasi, (o cinta damai, (p bersahabat/komunikatif, (q toleran, dan (r kreatif. (4 Terdapat persamaan dan perbedaan dalam IPK di kedua SMP tersebut, persamaannya adalah mengacu pada nilai-nilai yang ada pada prinsip ABITA, perbedaannya kalau di SMP Negeri 8 melaksanakan 12 nilai karakter dan kegiatan

  15. Aneurysm in the brain

    Science.gov (United States)

    ... gov/ency/article/001414.htm Aneurysm in the brain To use the sharing features on this page, ... aneurysm occurs in a blood vessel of the brain, it is called a cerebral, or intracranial, aneurysm. ...

  16. Brain aneurysm repair - discharge

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000123.htm Brain aneurysm repair - discharge To use the sharing features ... this page, please enable JavaScript. You had a brain aneurysm . An aneurysm is a weak area in ...

  17. Aneurysm Complications

    Science.gov (United States)

    ... Susco Chair of Research North Shore University Hospital, Brain Aneurysm Center Chair of Research The Christopher C. Getch, MD Chair of Research Carol W. Harvey Memorial Chair of Research Kristen’s Legacy of Love Chair of Research TeamCindy Alcatraz Chair of Research ...

  18. Foam patterns

    Science.gov (United States)

    Chaudhry, Anil R; Dzugan, Robert; Harrington, Richard M; Neece, Faurice D; Singh, Nipendra P; Westendorf, Travis

    2013-11-26

    A method of creating a foam pattern comprises mixing a polyol component and an isocyanate component to form a liquid mixture. The method further comprises placing a temporary core having a shape corresponding to a desired internal feature in a cavity of a mold and inserting the mixture into the cavity of the mold so that the mixture surrounds a portion of the temporary core. The method optionally further comprises using supporting pins made of foam to support the core in the mold cavity, with such pins becoming integral part of the pattern material simplifying subsequent processing. The method further comprises waiting for a predetermined time sufficient for a reaction from the mixture to form a foam pattern structure corresponding to the cavity of the mold, wherein the foam pattern structure encloses a portion of the temporary core and removing the temporary core from the pattern independent of chemical leaching.

  19. Forming foam structures with carbon foam substrates

    Science.gov (United States)

    Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

    2012-11-06

    The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

  20. Foam Microrheology

    International Nuclear Information System (INIS)

    KRAYNIK, ANDREW M.; LOEWENBERG, MICHAEL; REINELT, DOUGLAS A.

    1999-01-01

    The microrheology of liquid foams is discussed for two different regimes: static equilibrium where the capillary number Ca is zero, and the viscous regime where viscosity and surface tension are important and Ca is finite. The Surface Evolver is used to calculate the equilibrium structure of wet Kelvin foams and dry soap froths with random structure, i.e., topological disorder. The distributions of polyhedra and faces are compared with the experimental data of Matzke. Simple shearing flow of a random foam under quasistatic conditions is also described. Viscous phenomena are explored in the context of uniform expansion of 2D and 3D foams at low Reynolds number. Boundary integral methods are used to calculate the influence of Ca on the evolution of foam microstructure, which includes bubble shape and the distribution of liquid between films, Plateau borders, and (in 3D) the nodes where Plateau borders meet. The micromechanical point of view guides the development of structure-property-processing relationships for foams

  1. SMP Bladder Tooling for Manufacturing Composites, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — CRG's shape memory polymer (SMP) Bladder Tooling is a cutting-edge manufacturing technology that can meet the manufacturing needs of the Ares launch vehicles. This...

  2. Quantitative comparison of hemodynamics in simulated and 3D angiography models of cerebral aneurysms by use of computational fluid dynamics.

    Science.gov (United States)

    Saho, Tatsunori; Onishi, Hideo

    2015-07-01

    In this study, we evaluated hemodynamics using simulated models and determined how cerebral aneurysms develop in simulated and patient-specific models based on medical images. Computational fluid dynamics (CFD) was analyzed by use of OpenFOAM software. Flow velocity, stream line, and wall shear stress (WSS) were evaluated in a simulated model aneurysm with known geometry and in a three-dimensional angiographic model. The ratio of WSS at the aneurysm compared with that at the basilar artery was 1:10 in simulated model aneurysms with a diameter of 10 mm and 1:18 in the angiographic model, indicating similar tendencies. Vortex flow occurred in both model aneurysms, and the WSS decreased in larger model aneurysms. The angiographic model provided accurate CFD information, and the tendencies of simulated and angiographic models were similar. These findings indicate that hemodynamic effects are involved in the development of aneurysms.

  3. Ruptured submitral aneurysm

    Directory of Open Access Journals (Sweden)

    V. Shukla

    2016-09-01

    Full Text Available Submitral aneurysm is a rare entity, with around few hundred cases reported till date. Presentation can be varied. We describe here a case of submitral aneurysm in a young male with rupture into the left atrium cavity.

  4. Abdominal Aortic Aneurysm (AAA)

    Science.gov (United States)

    ... Professions Site Index A-Z Abdominal Aortic Aneurysm (AAA) Abdominal aortic aneurysm (AAA) occurs when atherosclerosis or plaque buildup causes the ... weak and bulge outward like a balloon. An AAA develops slowly over time and has few noticeable ...

  5. Infiltrated carbon foam composites

    Science.gov (United States)

    Lucas, Rick D. (Inventor); Danford, Harry E. (Inventor); Plucinski, Janusz W. (Inventor); Merriman, Douglas J. (Inventor); Blacker, Jesse M. (Inventor)

    2012-01-01

    An infiltrated carbon foam composite and method for making the composite is described. The infiltrated carbon foam composite may include a carbonized carbon aerogel in cells of a carbon foam body and a resin is infiltrated into the carbon foam body filling the cells of the carbon foam body and spaces around the carbonized carbon aerogel. The infiltrated carbon foam composites may be useful for mid-density ablative thermal protection systems.

  6. Brain Aneurysm: Treatment Options

    Science.gov (United States)

    ... inoperable aneurysms. Decisions regarding management of an unruptured brain aneurysm are based on the careful comparison of the short- and ... so Tired? How Do I Deal With Depression? Learning Principles to Aid Recovery The Memory Book ... Aneurysm Foundation Support Community Research & Grants BAF Research ...

  7. MODEL PELATIHAN GURU ILMU PENGETAHUAN SOSIAL DI SMP MUHAMMADIYAH KARTASURA

    Directory of Open Access Journals (Sweden)

    Tjipto Subadi

    2017-01-01

    Full Text Available The study aimed to review and describe: 1 Coaching model of social sciences teacher in SMP Muhammadiyah Kartasura. 2 Test the validation of coaching model on social sciences teacher. This study used a qualitative approach of phenomenology. This study was conducted in SMP Muhammadiyah Kartasura, Sukoharjo district. The research design was classroom action research. The subject in this research were students, teachers, the principal. Data collection technique used observation, testing and interview. The interview process using theory of first and second order understanding. Data were analyzed using an interactive model included data reduction, data display, and conclusion. This study concluded that 1 Coaching Model of social sciences teacher in SMP Muhammadiyah Kartasura used modification lesson study approach. 2 Validation of the coaching model using two kinds of validation namely theory of validation and practice of validation.

  8. PENERAPAN TEKNOLOGI WEB SEKOLAH BAGI SMP DAN SMA MUHAMMADIYAH KARTASURA

    Directory of Open Access Journals (Sweden)

    Heru Supriyono

    2016-03-01

    Full Text Available Observation and interview with headmasters, teachers and administrative employees results showed that one of main problems faced by SMP Muhammadiyah 1 Kartasura and SMA Muhammadiyah 4 Kartasura is the do not have a representative school website. Based on this observation, after making discussion with headmasters, the community services team proposed an implementation of school website and train one of chosen teacher to manage implemented website. The outcomes of the community service activities are involving a school website for SMP Muhammadiyah 1 Kartasura and SMA Muhammadiyah 4 Kartasura and scientific publication draft. The contribution of each school is including providing information which will be uploaded to the website, providing fee for domain and hosting cost, and providing facilities for administrator training. The duration of this commuity services is three months. The results of the community services is both SMP Muhammadiyah 1 Kartasura dan SMA Muhammadiyah 4 Kartasura are now have representative website for their promotion and administative activities.

  9. 76 FR 41260 - Supplemental Funding for the Senior Medicare Patrol (SMP) Program

    Science.gov (United States)

    2011-07-13

    ... additional funding to double the size of the SMP program. The SMP program expansion has resulted in... DEPARTMENT OF HEALTH AND HUMAN SERVICES Administration on Aging Supplemental Funding for the Senior Medicare Patrol (SMP) Program ACTION: Notice of intent to provide supplemental funding to the...

  10. Coronary artery aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Koischwitz, D.; Harder, T.; Schuppan, U.; Thurn, P.

    1982-04-01

    Seven saccular coronary artery aneurysms have been demonstrated in the course of 1452 selective coronary artery angiograms. In six patients they were arterio-sclerotic; in one patient the aneurysm must have been congenital or of mycotic-embolic origin. The differential diagnosis between true aneurysms and other causes of vascular dilatation is discussed. Coronary artery aneurysms have a poor prognosis because of the possibility of rupture with resultant cardiac tamponade, or the development of thrombo-embolic myocardial infarction. These aneurysms can only be diagnosed by means of coronary angiography and require appropriate treatment.

  11. Cross-species prophylactic efficacy of Sm-p80-based vaccine and intracellular localization of Sm-p80/Sm-p80 ortholog proteins during development in Schistosoma mansoni, Schistosoma japonicum, and Schistosoma haematobium.

    Science.gov (United States)

    Molehin, Adebayo J; Sennoune, Souad R; Zhang, Weidong; Rojo, Juan U; Siddiqui, Arif J; Herrera, Karlie A; Johnson, Laura; Sudduth, Justin; May, Jordan; Siddiqui, Afzal A

    2017-11-01

    Schistosomiasis remains a major global health problem. Despite large-scale schistosomiasis control efforts, clear limitations such as possible emergence of drug resistance and reinfection rates highlight the need for an effective schistosomiasis vaccine. Schistosoma mansoni large subunit of calpain (Sm-p80)-based vaccine formulations have shown remarkable efficacy in protecting against S. mansoni challenge infections in mice and baboons. In this study, we evaluated the cross-species protective efficacy of Sm-p80 vaccine against S. japonicum and S. haematobium challenge infections in rodent models. We also elucidated the expression of Sm-p80 and Sm-p80 ortholog proteins in different developmental stages of S. mansoni, S. haematobium, and S. japonicum. Immunization with Sm-p80 vaccine reduced worm burden by 46.75% against S. japonicum challenge infection in mice. DNA prime/protein boost (1 + 1 dose administered on a single day) resulted in 26.95% reduction in worm burden in S. haematobium-hamster infection/challenge model. A balanced Th1 (IFN-γ, TNF-α, IL-2, and IL-12) and Th2 (IL-4, IgG1) type of responses were observed following vaccination in both S. japonicum and S. haematobium challenge trials and these are associated with the prophylactic efficacy of Sm-p80 vaccine. Immunohistochemistry demonstrated that Sm-p80/Sm-p80 ortholog proteins are expressed in different life cycle stages of the three major human species of schistosomes studied. The data presented in this study reinforce the potential of Sm-p80-based vaccine for both hepatic/intestinal and urogenital schistosomiasis occurring in different geographical areas of the world. Differential expression of Sm-p80/Sm-p80 protein orthologs in different life cycle makes this vaccine potentially useful in targeting different levels of infection, disease, and transmission.

  12. ANALISIS TERHADAP TINGGINYA ANGKA PUTUS SEKOLAH SISWA SMP TERBUKA

    Directory of Open Access Journals (Sweden)

    T Effendy Suryana

    2017-06-01

    Based on the result above, the related ones  had better  find a fund for scholarship, in order to make a teaching learning activities at SMP Negeri 1 Pacet as main school, and to empower  all facilities in teaching learning process.

  13. Brain Aneurysm Statistics and Facts

    Science.gov (United States)

    ... Statistics and Facts A- A A+ Brain Aneurysm Statistics and Facts An estimated 6 million people in ... Understanding the Brain Warning Signs/ Symptoms Brain Aneurysm Statistics and Facts Seeking Medical Attention Risk Factors Aneurysm ...

  14. MOTIVASI KERJA GURU SMP NEGERI DI KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Supriyo .

    2015-04-01

    Full Text Available Abstrak: Penelitian ini bertujuan untuk menemukan model motivasi kerja guru SMP Negeri yang sesuai. Sampel penelitian berjumlah 322 orang guru SMP Negeri di Kota Semarang. Instrumen yang digunakan adalah skala numerikal. Analisis data melalui SEM dengan perangkat LISREL. Hasil penelitian model motivasi kerja guru SMP Negeri adalah fit. Secara keseluruhan, kepemimpinan kepala sekolah, kondisi lingkungan kerja, pelatihan, kompetensi, dan kepuasan kerja, pengaruhnya tinggi terhadap motivasi kerja guru (86%. Untuk meningkatkan motivasi kerja guru SMP Negeri hendaknya kepala sekolah dan pengawas memberdayakan guru secara optimal, menjadikan lingkungan kerja kondusif, merancang program pelatihan yang terarah. Dalam pengangkatan kepala SMPN, Dinas Pendidikan hendaknya memperhatikan kemampuan menejerial para calon. Kata Kunci: motivasi kerja, guru SMP STATE JUNIOR HIGH SCHOOL TEACHERS’ WORK MOTIVATION IN SEMARANG MUNICIPALITY Abstract: This study was aimed to find a fit model of State Junior High School Teachers’ work motivation. The sample consisted of 322 state junior high school teachers in Semarang municipality. The instrument used was in the form of a numerical scale. The data were analyzed through the SEM utilizing the LISREL program. The findings showed that the model was fit. As a whole, the school principal leadership, the work environment condition, training, competence, and work satisfaction had a high influence on the teachers’ work motivation (86%. To improve the teachers’ work motivation, it is suggested that the school principal and the supervisor empower the teachers optimally, create conducive work environment, and design a focused training program. In recruiting the school pricipal, the Local Office of Education should take into account the candidates’ managerial skill. Keywords: work motivation, junior high school teachers

  15. PENGELOLAAN BANTUAN SISWA MISKIN DI SMP MUHAMMADIYAH 8 WONOGIRI

    Directory of Open Access Journals (Sweden)

    Heru Mahmudi Santoso

    2015-08-01

    Full Text Available The aims of the research are to: 1 describe the preparation of management of Student Financial Aid Program; 2 describe the activities of management of Student Financial Aid Program; and 3 describe the management report of Student Financial Aid Program at SMP Muhammadiyah 8 Wonogiri. The research method applied was descriptive qualitative study by using an ethnographic approach. The subject of the research was SMP Muhammadiyah 8 Wonogiri. The data were collected through in-deep interview, observation and documentation. The informants of the research are: the principal, vice-principal, and teachers, who have the role in Poverty Student Aids management of SMP Muhammadiyah 8 Wonogiri. The data were obtained and analyzed by using an interactive model which included data collection, reduction, verification and drawing conclusion. The research result showed that; 1 The preparation of management of Student Financial Aid Program at SMP Muhammadiyah 8 Wonogiri was started by conducting a coordination among the principal, teachers, staffs, and team. Then they prepared some data related to students’ background which would be promoted to get Student Financial Aid Program ; 2 The activities in managing of The Student Financial Aid Program was started by planning, actuating, distributing, recording, controlling, and reporting of Student Financial Aid Program as a form of responsibility of the team in managing Student Financial Aid Program, and 3 In the end of management process of Student Financial Aid Program, school or the team had a responsibility to record and report the outcome of the management of Student Financial Aid Program at SMP Muhammadiyah 8 Wonogiri. By reporting the outcome, it meant that the management of Student Financial Aid Program had been finished. The whole management activities of Student Financial Aid Program were based on the principles of School Financial Management, those are; transparency, accountability, effectively, efficiency

  16. Standardization of SMP procedure and its impact on outcome

    Directory of Open Access Journals (Sweden)

    Rachita S Dhurat

    2017-01-01

    Full Text Available Background: Cosmetic deformities can result from various types of alopecia or even post hair transplantation procedures. Patients with such deformities seek aesthetically appealing longer-lasting options. Scalp concealers are commonly used by men and women to camouflage these deformities. Scalp micropigmentation (SMP is one of the concealers recently gaining popularity. Objectives: SMP is a novel technique wherein microdot tattoos are placed in a stippling pattern to mimic hair follicles that are cut close to the scalp and various variables affecting its outcome were evaluated. Methods: Forty-five subjects were recruited for the study. The various factors affecting outcome of SMP—angle of needle against the scalp, depth of needle into the scalp, time of the needle contact in scalp, speed of the rotor, resistance of scalp, color of pigment, viscosity of dye, needle number, needle thickness, and pattern of dot placement—were systematically studied in 15 patients through clinical photographs and trichoscopy. Ideal depth of pigment deposition was assessed through histopathological examination. After using these optimum variables, standardized SMP was performed in 30 patients with hair loss (3 patients with cicatricial and 27 patients with diffuse non-cicatricial alopecia. SMP was also used to create an aesthetically denser hairline. The outcome of the procedure was evaluated using standardized global photographs. Results: The ideal parameters were established to achieve standard reproducible results. There were great patient satisfaction and acceptance of the procedure. All the patients showed moderate to great improvement after the procedure with satisfactory scalp coverage. Adverse events were transient which were seen in the form of edema and redness. Conclusion: SMP offers a non-medical, tattoo-based cosmetically appealing and effective “cover-up” that hides the unsightly conditions. The cosmetic tattoo placement creates an illusion of

  17. Hepatic artery aneurysms (HAAs)

    International Nuclear Information System (INIS)

    Nosratini, H.

    2004-01-01

    The hepatic artery aneurysms are rare, especially in interahepatic branches, The frequency consists of 75-80% extrahepatic and 20-25% intrahepatic. Catheterization is achieved usually from common femoral artery, other methods implemented in the case of unsuccessful catheterization from femoral artery, are translumbar and brachial catheterization. The study consist of 565 patients that were referred to the angiography ward, During seven years of assessment, five cases of hepatic artery aneurysm were found; this is a rare condition reported in the English literature. In the literature as well as in this case report the hepatic artery aneurysms are rare. In reported series the extrahepatic artery aneurysms are found more often than in the intrahepatic artery aneurysm but in this case report intrahepatic artery aneurysms are more than extrahepatic one. (author)

  18. Bubble and foam chemistry

    CERN Document Server

    Pugh, Robert J

    2016-01-01

    This indispensable guide will equip the reader with a thorough understanding of the field of foaming chemistry. Assuming only basic theoretical background knowledge, the book provides a straightforward introduction to the principles and properties of foams and foaming surfactants. It discusses the key ideas that underpin why foaming occurs, how it can be avoided and how different degrees of antifoaming can be achieved, and covers the latest test methods, including laboratory and industrial developed techniques. Detailing a variety of different kinds of foams, from wet detergents and food foams, to polymeric, material and metal foams, it connects theory to real-world applications and recent developments in foam research. Combining academic and industrial viewpoints, this book is the definitive stand-alone resource for researchers, students and industrialists working on foam technology, colloidal systems in the field of chemical engineering, fluid mechanics, physical chemistry, and applied physics.

  19. EVALUASI PROGRAM AKSELERASI DI SMP NEGERI KOTA AMBON

    Directory of Open Access Journals (Sweden)

    David Tuhurima

    2016-06-01

    Full Text Available This research is aimed to evaluate acceleration program in SMP Negeri 6 Ambon which is include four components such as: (1Context (2Input (3 Process, and (4Product. This is an evaluative research using descriptive analysis. This research informants are principals, viceprincipals, program coordinators, teachers, school committees, parents, and students accelerated program. Research sites in SMP Negeri 6 Ambon. The data is collected using interview, observation and documentation study techniques. For the data validation, this research used triangulation of sources and techniques. The results shows that, from context, the implementation of the acceleration program is a school’s initiative as an effort to address the needs and provide the education services for special smart learners (IQ  130 as well as the effectiveness of school facilities and infrastructure utilization. From the point of input including: (a the program policy, the school has permission from the department as the juridical basis for accelerated program implementation, and (b planning program: recruitment of learners are in accordance with the criteria, curriculum acceleration program already differentiated, educators (teachers already meets the qualifications and criteria as teacher in class acceleration, infrastructure and financing program is sufficient to support the accelerated program. In terms of Process, acceleration program in SMP Negeri 6 Ambon has been implemented in accordance with the planning program, although there are still some shortcomings and obstacles. Recruitment of learners already implemented, curriculum adjustments will only be visible on the implementation of the teaching and learning activities, educators (teachers are still there who do not meet the qualifications and criteria as a teacher in class acceleration, infrastructure is not sufficient to support an accelerated program of activities, and financing programs that is still lacking. The

  20. Foams theory, measurements, and applications

    CERN Document Server

    Khan, Saad A

    1996-01-01

    This volume discusses the physics and physical processes of foam and foaming. It delineates various measurement techniques for characterizing foams and foam properties as well as the chemistry and application of foams. The use of foams in the textile industry, personal care products, enhanced oil recovery, firefighting and mineral floatation are highlighted, and the connection between the microstructure and physical properties of foam are detailed. Coverage includes nonaqueous foams and silicone antifoams, and more.

  1. KOMPUTERISASI PENGOLAHAN DATA PERPUSTAKAAN SMP 1 KALIWIRO BERBASIS MULTI USER

    Directory of Open Access Journals (Sweden)

    Andi Dwi Riyanto

    2008-08-01

    Full Text Available Komputerisasi Pengolahan Data Perpustakaan SMP 1 Kaliwiro di angkat menjadi tema pada penelitian ini karena berdasar penelitian oleh penulis, sistem pengolahan data yang ada pada SMP tersebut masih bersifat manual, sehingga penulis berkeinginan mengganti sistem yang ada dengan sistem komputer. Ruang lingkup dari tugas akhir ini dibatasi pada peng-input-an data anggota, buku dan invent buku, kemudian transaksi peminjaman, pengembalian dan perpanjangan buku, serta output berupa laporan. Program pengolahan data perpustakaan ini mendukung konsep MULTIUSER, yaitu dapat diakses oleh beberapa komputer secara bersamaan. Namun dari program aplikasi yang dibuat, masih banyak kemungkinan pengembangan yang dapat dilakukan di kemudian hari. Misalnya seperti untuk tampilan interface bisa dibuat cantik sesuai selera atau permintaan instansi, kemudian bisa dikembangkan menjadi berbasis WEB agar dapat diakses melalui internet, atau bahkan WAP agar dapat diakses melalui handphone.

  2. Effective thermo-mechanical properties and shape memory effect of CNT/SMP composites

    Science.gov (United States)

    Yang, Qingsheng; Liu, Xia; Leng, Fangfang

    2009-07-01

    Shape memory polymer (SMP) has been applied in many fields as intelligent sensors and actuators. In order to improve the mechanical properties and recovery force of SMP, the addition of minor amounts of carbon nanotubes (CNT) into SMP has attracted wide attention. A micromechanical model and thermo-mechanical properties of CNT/SMP composites were studied in this paper. The thermo-mechanical constitutive relation of intellectual composites with isotropic and transversely isotropic CNT was obtained. Moreover, the shape memory effect of CNT/SMP composites and the effect of temperature and the volume fraction of CNT were discussed. The work shows that CNT/SMP composites exhibit excellent macroscopic thermo-mechanical properties and shape memory effect, while both of them can be affected remarkably by temperature and the microstructure parameters.

  3. Polyurethane-Foam Maskant

    Science.gov (United States)

    Bodemeijer, R.

    1985-01-01

    Brown wax previously used to mask hardware replaced with polyurethane foam in electroplating and electroforming operations. Foam easier to apply and remove than wax and does not contaminate electrolytes.

  4. Fire retardant polyisocyanurate foam

    Science.gov (United States)

    Riccitiello, S. R.; Parker, J. A.

    1972-01-01

    Fire retardant properties of low density polymer foam are increased. Foam has pendant nitrile groups which form thermally-stable heterocyclic structures at temperature below degradation temperature of urethane linkages.

  5. Foam engineering fundamentals and applications

    CERN Document Server

    2012-01-01

    Containing contributions from leading academic and industrial researchers, this book provides a much needed update of foam science research. The first section of the book presents an accessible summary of the theory and fundamentals of foams. This includes chapters on morphology, drainage, Ostwald ripening, coalescence, rheology, and pneumatic foams. The second section demonstrates how this theory is used in a wide range of industrial applications, including foam fractionation, froth flotation and foam mitigation. It includes chapters on suprafroths, flotation of oil sands, foams in enhancing petroleum recovery, Gas-liquid Mass Transfer in foam, foams in glass manufacturing, fire-fighting foam technology and consumer product foams.

  6. Quantification of nitrous oxide (N2O) emissions and soluble microbial product (SMP) production by a modified AOB-NOB-N2O-SMP model.

    Science.gov (United States)

    Kim, MinJeong; Wu, Guangxue; Yoo, ChangKyoo

    2017-03-01

    A modified AOB-NOB-N 2 O-SMP model able to quantify nitrous oxide (N 2 O) emissions and soluble microbial product (SMP) production during wastewater treatment is proposed. The modified AOB-NOB-N 2 O-SMP model takes into account: (1) two-step nitrification by ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB), (2) N 2 O production by AOB denitrification under oxygen-limited conditions and (3) SMP production by microbial growth and endogenous respiration. Validity of the modified model is demonstrated by comparing the simulation results with experimental data from lab-scale sequencing batch reactors (SBRs). To reliably implement the modified model, a model calibration that adjusts model parameters to fit the model outputs to the experimental data is conducted. The results of this study showed that the modeling accuracy of the modified AOB-NOB-N 2 O-SMP model increases by 19.7% (NH 4 ), 51.0% (NO 2 ), 57.8% (N 2 O) and 16.7% (SMP) compared to the conventional model which does not consider the two-step nitrification and SMP production by microbial endogenous respiration. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. ANALISIS KUALITAS PENGELOLAAN KELAS PEMBELAJARAN SAINS PADA SMP SSN DI KABUPATEN PATI

    Directory of Open Access Journals (Sweden)

    Prasetyaningsih Prasetyaningsih

    2016-12-01

    Full Text Available Abstract This study aimed at identifying in: (1 planning the classroom management for the SSN classes and (2 managing the classroom, in the teaching and learning process of science in SSN schools.This is a evaluatif study which focuses on the classroom management of science learning in SSN junior high schools. The subjects of the research are SSN Junior High Schools of Pati Regency which focuses on the classroom management of science learning. There are six SSN schools, namely  SMP N 2 Pati, SMP N 4 Pati,  SMP N 1 Wedarijaksa, SMP N 1 Trangkil, SMP N 1 Tlogowungu, and SMP N 1 Gabus. The data were gained through observation, interview, questionnaire, and document study.The result shows that : the classroom management planning  in SSN Junior High Schools in the science learning at Pati Regency are categorizes good: the science teacher  SSN Junior High School the use of ICT in science learning was not taken into account, teaching materials (handouts, worksheets, modules and ICT-based teaching material were not developed yet, the assessment planning did not complete. Process in the science learning at SNN junior High School are as categirizes good.  Keywords: Classroom Management, SSN, Science Learning. Abstrak Penelitian ini bertujuan untuk: (1 mengidentifikasi perencanaan pengelolaan kelas di SMP SSN dalam pembelajaran sains; (2 mengidentifikasi proses pengelolaan kelas di SMP SSN dalam pembelajaran sains. Penelitian ini merupakan penelitian evaluatif, yang memfokuskan pada kualitas pengelolaan kelas pembelajaran sains pada SMP SSN. Subjek penelitian ini SMP SSN Kabupaten Pati yang difokuskan pada perencanaan dan pelaksanaan pengelolaan kelas pembelajaran sains.Data penelitian diperoleh melalui: observasi, wawancara, angket, dan dokumentasi. Data yang diperoleh bersifat subjektif, berupa hasil observasi, wawancara, dan angket.Hasil penelitian menunjukkan: perencanaan pengelolaan kelas di SMP SSN dalam pembelajaran sains berkategori baik

  8. Operator spin foam models

    International Nuclear Information System (INIS)

    Bahr, Benjamin; Hellmann, Frank; Kaminski, Wojciech; Kisielowski, Marcin; Lewandowski, Jerzy

    2011-01-01

    The goal of this paper is to introduce a systematic approach to spin foams. We define operator spin foams, that is foams labelled by group representations and operators, as our main tool. A set of moves we define in the set of the operator spin foams (among other operations) allows us to split the faces and the edges of the foams. We assign to each operator spin foam a contracted operator, by using the contractions at the vertices and suitably adjusted face amplitudes. The emergence of the face amplitudes is the consequence of assuming the invariance of the contracted operator with respect to the moves. Next, we define spin foam models and consider the class of models assumed to be symmetric with respect to the moves we have introduced, and assuming their partition functions (state sums) are defined by the contracted operators. Briefly speaking, those operator spin foam models are invariant with respect to the cellular decomposition, and are sensitive only to the topology and colouring of the foam. Imposing an extra symmetry leads to a family we call natural operator spin foam models. This symmetry, combined with assumed invariance with respect to the edge splitting move, determines a complete characterization of a general natural model. It can be obtained by applying arbitrary (quantum) constraints on an arbitrary BF spin foam model. In particular, imposing suitable constraints on a spin(4) BF spin foam model is exactly the way we tend to view 4D quantum gravity, starting with the BC model and continuing with the Engle-Pereira-Rovelli-Livine (EPRL) or Freidel-Krasnov (FK) models. That makes our framework directly applicable to those models. Specifically, our operator spin foam framework can be translated into the language of spin foams and partition functions. Among our natural spin foam models there are the BF spin foam model, the BC model, and a model corresponding to the EPRL intertwiners. Our operator spin foam framework can also be used for more general spin

  9. Unruptured Brain Aneurysms

    Science.gov (United States)

    ... treated with either endovascular coiling or open surgical clipping. However, if the unruptured aneurysm is treated successfully, ... Medical Advisory Board Publications BAF Newsletters Annual Reports News Public Service Announcements Press Releases Blog Administrative Tax ...

  10. Aneurysmal Subarachnoid Hemorrhage

    Science.gov (United States)

    2015-01-01

    Aneurysmal subarachnoid hemorrhage (SAH) is a worldwide health burden with high fatality and permanent disability rates. The overall prognosis depends on the volume of the initial bleed, rebleeding, and degree of delayed cerebral ischemia (DCI). Cardiac manifestations and neurogenic pulmonary edema indicate the severity of SAH. The International Subarachnoid Aneurysm Trial (ISAT) reported a favorable neurological outcome with the endovascular coiling procedure compared with surgical clipping at the end of 1 year. The ISAT trial recruits were primarily neurologically good grade patients with smaller anterior circulation aneurysms, and therefore the results cannot be reliably extrapolated to larger aneurysms, posterior circulation aneurysms, patients presenting with complex aneurysm morphology, and poor neurological grades. The role of hypothermia is not proven to be neuroprotective according to a large randomized controlled trial, Intraoperative Hypothermia for Aneurysms Surgery Trial (IHAST II), which recruited patients with good neurological grades. Patients in this trial were subjected to slow cooling and inadequate cooling time and were rewarmed rapidly. This methodology would have reduced the beneficial effects of hypothermia. Adenosine is found to be beneficial for transient induced hypotension in 2 retrospective analyses, without increasing the risk for cardiac and neurological morbidity. The neurological benefit of pharmacological neuroprotection and neuromonitoring is not proven in patients undergoing clipping of aneurysms. DCI is an important cause of morbidity and mortality following SAH, and the pathophysiology is likely multifactorial and not yet understood. At present, oral nimodipine has an established role in the management of DCI, along with maintenance of euvolemia and induced hypertension. Following SAH, hypernatremia, although less common than hyponatremia, is a predictor of poor neurological outcome. PMID:25272066

  11. Décadas de oro de la centenaria SMP

    OpenAIRE

    Duque Escobar, Gonzalo

    2012-01-01

    Aportes de la SMP hasta el Centenario de Manizales, de este espacio cívico creado en 1912 cuando Aquilino Villegas y Alfonso Robledo convocan a notables ciudadanos de la próspera aldea, como Alfonso Villegas, Carlos E. Pinzón, Constantino Gutiérrez, Estanislao Estrada, Fernando Arango, Francisco Gutiérrez, Gonzalo Villegas, Jesús María Arias, Liborio Gutiérrez, Luis Londoño, Pedro Henao y Pompilio Gutiérrez.

  12. Innovative Soil Management Practices (SMP) Assessment in Europe and China

    Science.gov (United States)

    Barão, Lúcia

    2017-04-01

    The growing world population poses a major challenge to global agricultural food and feed production through the pressure to increase agricultural outputs either by increasing the land area dedicated to agriculture or by productivity increases. Whether in developed or developing regions, agricultural intensification based on conventional approaches has resulted in severe environmental impacts and innovative soil management practices are needed to halter ongoing soil degradation and promote sustainable land management capable to produce more from less. The iSQAPER project - Interactive Soil Quality Assessment in Europe and China for Agricultural Productivity and Environmental Resilience - aims to develop a Soil Quality app (SQAPP) linking soil and agricultural management practices to soil quality indicators. This easy friendly tool will provide a direct and convenient way to advise farmers and other suitable actors in this area, regarding the best management practices to be adopted in very specific and local conditions. In this particular study from iSQAPER, we aimed to identify the most promising innovative soil management practices (SMP) currently used and its geographical distribution along different pedo-climatic regions in Europe (Boreal, Atlantic, Mediterranean Temperate, Mediterranean Semi-Arid, Southern Sub-Continental and Northern Sub-Continental) and China (Middle Temperate, Warm temperate and Central Asia Tropical). So far we have identified 155 farms where innovative SMP's are used, distributed along 4 study site regions located in China (Qiyang, Suining, Zhifanggou and Gongzhuling) and 10 study site regions located in Europe (The Netherlands, France, Portugal, Spain, Greece, Slovenia, Hungary, Romania, Poland and Estonia) and covering the major pedo-climatic regions. From this identification we concluded that the most used innovative SMP's in the study site regions in Europe are Manuring & Composting (14%), Min-till (14%), Crop rotation (12

  13. Modeling the formation of soluble microbial products (SMP in drinking water biofiltration

    Directory of Open Access Journals (Sweden)

    Yu Xin

    2008-09-01

    Full Text Available Both a theoretical and an empirical model were developed for predicting the formation of soluble microbial products (SMP during drinking water biofiltration. Four pilot-scale biofilters with ceramsite as the medium were fed with different acetate loadings for the determination of SMP formation. Using numerically simulated and measured parameters, the theoretical model was developed according to the substrate and biomass balance. The results of this model matched the measured data better for higher SMP formation but did not fit well when SMP formation was lower. In order to better simulate the reality and overcome the difficulties of measuring the kinetic parameters, a simpler empirical model was also developed. In this model, SMP formation was expressed as a function of fed organic loadings and the depth of the medium, and a much better fit was obtained.

  14. Modeling how soluble microbial products (SMP) support heterotrophic bacteria in autotroph-based biofilms

    DEFF Research Database (Denmark)

    Merkey, Brian; Rittmann, Bruce E.; Chopp, David L.

    2009-01-01

    . In this paper, we develop and use a mathematical model to describe a model biofilm system that includes autotrophic and heterotrophic bacteria and the key products produced by the bacteria. The model combines the methods of earlier multi-species models with a multi-component biofilm model in order to explore...... the interaction between species via exchange of soluble microbial products (SMP). We show that multiple parameter sets are able to describe the findings of experimental studies, and that heterotrophs growing on autotrophically produced SMP may pursue either r- or K-strategies to sustain themselves when SMP...... is their only substrate. We also show that heterotrophs can colonize some distance from the autotrophs and still be sustained by autotrophically produced SMP. This work defines the feasible range of parameters for utilization of SMP by heterotrophs and the nature of the interactions between autotrophs...

  15. PERBEDAAN SELF-REGULATED LEARNING DITINJAU DARI POLA ASUH ORANGTUA PADA SISWA KELAS VIII SMP FRANSISKUS DAN SMP PGRI 01 SEMARANG

    OpenAIRE

    Lintang Januardini; Sri Hartati; Tri Puji Astuti

    2015-01-01

    Relationship between parents and adolescents influence achievement at school. The research was conducted to determine differences of self-regulated learning (SRL) in terms of parenting style. The population is 8th grade students of junior high school in SMP Fransiskus and SMP PGRI 01 Semarang. The hypothesis is there are differences of SRL in terms of parenting style. Parenting is overall characteristic of parent’s behavior on adolescents, including a response in the form of parental warmth, ...

  16. Anaerobic Digestion Foaming Causes

    OpenAIRE

    Ganidi, Nafsika

    2008-01-01

    Anaerobic digestion foaming has been encountered in several sewage treatment plants in the UK. Foaming has raised major concerns for the water utilities due to significant impacts on process efficiency and operational costs. Several foaming causes have been suggested over the past few years by researchers. However, the supporting experimental information is limited and in some cases site specific. The present report aimed to provide a better understanding of the anaerobic di...

  17. Thermosetting Fluoropolymer Foams

    Science.gov (United States)

    Lee, Sheng Yen

    1987-01-01

    New process makes fluoropolymer foams with controllable amounts of inert-gas fillings in foam cells. Thermosetting fluoropolymers do not require foaming additives leaving undesirable residues and do not have to be molded and sintered at temperatures of about 240 to 400 degree C. Consequently, better for use with electronic or other parts sensitive to high temperatures or residues. Uses include coatings, electrical insulation, and structural parts.

  18. High performance polymeric foams

    International Nuclear Information System (INIS)

    Gargiulo, M.; Sorrentino, L.; Iannace, S.

    2008-01-01

    The aim of this work was to investigate the foamability of high-performance polymers (polyethersulfone, polyphenylsulfone, polyetherimide and polyethylenenaphtalate). Two different methods have been used to prepare the foam samples: high temperature expansion and two-stage batch process. The effects of processing parameters (saturation time and pressure, foaming temperature) on the densities and microcellular structures of these foams were analyzed by using scanning electron microscopy

  19. Fire-retardant foams

    Science.gov (United States)

    Gagliani, J.

    1978-01-01

    Family of polyimide resins are being developed as foams with exceptional fire-retardant properties. Foams are potentially useful for seat cushions in aircraft and ground vehicles and for applications such as home furnishings and building-construction materials. Basic formulations can be modified with reinforcing fibers or fillers to produce celular materials for variety of applications. By selecting reactants, polymer structure can be modified to give foams with properties ranging from high resiliency and flexibility to brittleness and rigidity.

  20. Endovascular treatment of very small intracranial aneurysms

    DEFF Research Database (Denmark)

    Iskandar, A; Nepper-Rasmussen, J

    2011-01-01

    to large aneurysms (> 3 mm). However the data also suggest that endovascular treatment of very small aneurysms might be associated with an increased risk of procedural ruptures and mortality. At nine-month follow-up results indicate significantly less compaction in the very small aneurysms....... endovascular treatment was attempted in 956 consecutive intracranial aneurysms. Of 956 aneurysms, 111 aneurysms were very small aneurysms with a maximal diameter of 3 mm or less. We conducted a retrospective analysis of angiographic and clinical outcome following coiling of very small aneurysms...... aneurysms and less than 90% aneurysm occlusion in six aneurysms. Complications occurred in the treatment of 15 aneurysms, including eight procedural ruptures, six thromboembolic events and one case of early hemorrhage. Compared with larger aneurysms, treatment of very small aneurysms was associated...

  1. Flexible Foam Model.

    Energy Technology Data Exchange (ETDEWEB)

    Neilsen, Michael K.; Lu, Wei-Yang; Werner, Brian T.; Scherzinger, William M.; Lo, Chi S.

    2018-03-01

    Experiments were performed to characterize the mechanical response of a 15 pcf flexible polyurethane foam to large deformation at different strain rates and temperatures. Results from these experiments indicated that at room temperature, flexible polyurethane foams exhibit significant nonlinear elastic deformation and nearly return to their original undeformed shape when unloaded. However, when these foams are cooled to temperatures below their glass transition temperature of approximately -35 o C, they behave like rigid polyurethane foams and exhibit significant permanent deformation when compressed. Thus, a new model which captures this dramatic change in behavior with temperature was developed and implemented into SIERRA with the name Flex_Foam to describe the mechanical response of both flexible and rigid foams to large deformation at a variety of temperatures and strain rates. This report includes a description of recent experiments. Next, development of the Flex Foam model for flexible polyurethane and other flexible foams is described. Selection of material parameters are discussed and finite element simulations with the new Flex Foam model are compared with experimental results to show behavior that can be captured with this new model.

  2. Giant true celiac artery aneurysm

    International Nuclear Information System (INIS)

    Aljabri, Badr

    2009-01-01

    Celiac artery aneurysms are rare and usually asymptomatic. The management of these aneurysms is challenging, especially when they are large and involve the confluence of the trifurcation. We present here a case of a large celiac artery aneurysm involving its branches in a young woman. Preoperative investigations, intraoperative findings, and the operative procedure are also presented and discussed. (author

  3. Foam Glass for Construction Materials

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund

    2016-01-01

    Foaming is commonly achieved by adding foaming agents such as metal oxides or metal carbonates to glass powder. At elevated temperature, the glass melt becomes viscous and the foaming agents decompose or react to form gas, causing a foamy glass melt. Subsequent cooling to room temperature, result...... in a solid foam glass. The foam glass industry employs a range of different melt precursors and foaming agents. Recycle glass is key melt precursors. Many parameters influence the foaming process and optimising the foaming conditions is very time consuming. The most challenging and attractive goal is to make...... low density foam glass for thermal insulation applications. In this thesis, it is argued that the use of metal carbonates as foaming agents is not suitable for low density foam glass. A reaction mechanism is proposed to justify this result. Furthermore, an in situ method is developed to optimise...

  4. Beer foam physics

    NARCIS (Netherlands)

    Ronteltap, A.D.

    1989-01-01

    The physical aspects of beer foam behavior were studied in terms of the four physical processes, mainly involved in the formation and breakdown of foam. These processes are, bubble formation, drainage, disproportionation and coalescence. In detail, the processes disproportionation and

  5. A two-system, single-analysis, fluid-structure interaction technique for modelling abdominal aortic aneurysms.

    Science.gov (United States)

    Kelly, S C; O'Rourke, M J

    2010-01-01

    This work reports on the implementation and validation of a two-system, single-analysis, fluid-structure interaction (FSI) technique that uses the finite volume (FV) method for performing simulations on abdominal aortic aneurysm (AAA) geometries. This FSI technique, which was implemented in OpenFOAM, included fluid and solid mesh motion and incorporated a non-linear material model to represent AAA tissue. Fully implicit coupling was implemented, ensuring that both the fluid and solid domains reached convergence within each time step. The fluid and solid parts of the FSI code were validated independently through comparison with experimental data, before performing a complete FSI simulation on an idealized AAA geometry. Results from the FSI simulation showed that a vortex formed at the proximal end of the aneurysm during systolic acceleration, and moved towards the distal end of the aneurysm during diastole. Wall shear stress (WSS) values were found to peak at both the proximal and distal ends of the aneurysm and remain low along the centre of the aneurysm. The maximum von Mises stress in the aneurysm wall was found to be 408kPa, and this occurred at the proximal end of the aneurysm, while the maximum displacement of 2.31 mm occurred in the centre of the aneurysm. These results were found to be consistent with results from other FSI studies in the literature.

  6. Profil Merokok pada Pelajar di Tiga SMP di Kota Padang

    Directory of Open Access Journals (Sweden)

    Yessy Susanti Sabti

    2015-09-01

    Full Text Available Abstrak   Merokok merupakan kontributor utama kematian.  Jumlah perokok semakin meningkat di seluruh dunia dan sebagian besar berada dinegara berkembang, termasuk Indonesia. Sebagai negara dengan perokok terbanyak ketiga di dunia, prevalensi perokok remaja di Indonesia semakin meningkat setiap tahun. Dengan menggunakan kuesionerGlobal Youth Tobacco Survey, kami meneliti profil merokok pada pelajar di tida SMP di kota Padang. Desain peneitian adalah crossectional. Data diperoleh dari kuesioner Global Youth Tobacco Survey, berbahasa Indonesia. Didapatkan sampel 240  murid dari 3 SMP dipilih secara acak di Kota Padang. Hasil : 27,7% murid pernah merokok, dan semuanya adalah laki-laki. 29%  mencoba rokok pada usia kurang dari 10 tahun. 37%  murid masih merokok sampai sekarang, 46% diantaranya sudah ketagihan rokok. Sebanyak 77,1% murid yang pernah merokok mempunyai orang tua perokok. Sebagian besar dari total sampel terpapar asap rokok lingkungan baik di rumah dan di tempat-tempat umum. Kesimpulan: Lebih dari seperempat pelajar di tiga SMP di kota Padang pernah merokok dan semuanya laki laki, dan mencoba merokok padausia kurang dari 10 tahun. Hampir seperlima sudah ketagihan merokok.Kata kunci: Pelajar, Merokok, Global Youth Tobacco SurveyAbstract Smoking is the mayor contibutor of death, and the number of smoker is growing overworld. More of them live in the developing country, including Indonesia. As the third of most smoker number, the teenager smoker prevalence in Indonesia is increase over year. By using Indonesian language adapted of Global Youth Tobacco Survey quessionaires, we researched smoking teenager behaviour and realted factors at Junior High School of Padang. Design of study is crossectional, datas collected from 240 students of three randomized selected Junior High School, by  Global Youth Tobacco Survey quessionaires that has adapted to Indonesian language. Results : 27,7% of students reported that they ever smoked cigarettes

  7. Impact of foamed matrix components on foamed concrete properties

    Science.gov (United States)

    Tarasenko, V. N.

    2018-03-01

    The improvement of the matrix foam structure by means of foam stabilizing additives is aimed at solving the technology-oriented problems as well as at the further improvement of physical and mechanical properties of cellular-concrete composites. The dry foam mineralization is the mainstream of this research. Adding the concrete densifiers, foam stabilizers and mineral powders reduces the drying shrinkage, which makes the foam concrete products technologically effective.

  8. Kemampuan Representasi Matematis Siswa SMP Melalui Pendekatan Pendidikan Matematika Realistik

    Directory of Open Access Journals (Sweden)

    Sulastri Sulastri

    2017-06-01

    Full Text Available [Bahasa]: Penelitian kualitatif ini bertujuan untuk mendeskripsikan kemampuan representasi matematis siswa melalui pendekatan Pendidikan Matematika Realistik (PMR. Penelitian ini dilakukan di kelas VII-2 SMP Negeri 6 Banda Aceh yang melibatkan enam siswa.  Kemampuan representasi siswa dianalisis dari hasil tes dan wawancara setelah penerapan PMR melalui tahap reduksi data, penyajian data, dan penarikan kesimpulan. Berdasarkan hasil tes, subjek penelitian dikategorikan menjadi siswa dengan kemampuan representasi matematika tinggi, sedang dan rendah. Keenam siswa tersebut diwawancara untuk mengonfirmasi hasil tes. Hasil penelitian menunjukan bahwa siswa yang berkemampuan tinggi dan sedang memenuhi ketiga indikator kemampuan representasi matematis yaitu menyajikan data atau informasi dari suatu masalah ke representasi tabel, menyelesaikan masalah yang melibatkan ekspresi matematis, serta menuliskan langkah-langkah penyelesaian masalah matematika dengan kata-kata. Siswa berkemampuan rendah memenuhi dua indikator kemampuan representasi matematis yaitu menyelesaikan masalah yang melibatkan ekspresi matematis dan menuliskan langkah-langkah penyelesaian masalah matematika dengan kata-kata. Kata kunci:   Representasi Matematis; Kemampuan; Pendidikan Matematika Realistik [English]: This qualitative reseach aims at describing students’ representation ability through realistic mathematics education (RME. It is conducted in grade VII-2 SMP Negeri 6 Banda Aceh focusing on the six students. Students’ representation ability is analyzed from the developed test and interview after applying RME through data reduction, data display and conclusion. Based on the result of the test, the subjects are categorized into students who have high, medium and low ability in mathematical representation. They are then interviewed to confirm the test. The research finds that students in high and medium category fulfill the three indicators of mathematical representation, i

  9. PERANAN SIARAN TELEVISI EDUKASI DALAM MENDUKUNG TERCIPTANYA SUMBER DAN MOTIVASI BELAJAR BAGI SISWA SMP DI YOGYAKARTA

    Directory of Open Access Journals (Sweden)

    Muhammad Ragil Kurniawan

    2014-04-01

    Full Text Available Penelitian ini bertujuan untuk mengungkap peranan siaran televisi edukasi (TVe sebagai sumber belajar dan motivasi belajar bagi siswa SMP di Kodya Yogyakarta. Penelitian menggunakan metode gabungan (mixed method yaitu penelitian kuantitatif jenis survei diikuti dengan penelitian kualitatif. Pengumpulan data kuantitatif dilakukan dengan menggunakan angket. Sedangkan pengumpulan data kualitatif menggunakan metode wawancara mendalam dan observasi. Data kuantitatif dianalisis menggunakan analisis deskriptif, sedangkan data kualitatif dianalisis menggunakan model Miles dan Huberman. Populasi penelitian adalah 17 SMP di Kodya Yogyakarta. Hasil penelitian menunjukkan: (1 Siaran TV Edukasi belum memberikan peran yang signifikan dalam meningkatkan sumber belajar bagi siswa SMP di Kodya Yogyakarta. (2 Siaran TV Edukasi belum berperan yang signifikan dalam meningkatkan motivasi belajar bagi siswa SMP di Kodya Yogyakarta. Kata kunci: televisi edukasi (TVe, sumber belajar, motivasi belajar.

  10. Technology of foamed propellants

    Energy Technology Data Exchange (ETDEWEB)

    Boehnlein-Mauss, Jutta; Kroeber, Hartmut [Fraunhofer Institut fuer Chemische Technologie ICT, Pfinztal (Germany)

    2009-06-15

    Foamed propellants are based on crystalline explosives bonded in energetic reaction polymers. Due to their porous structures they are distinguished by high burning rates. Energy content and material characteristics can be varied by using different energetic fillers, energetic polymers and porous structures. Foamed charges can be produced easily by the reaction injection moulding process. For the manufacturing of foamed propellants a semi-continuous remote controlled production plant in pilot scale was set up and a modified reaction injection moulding process was applied. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  11. An extracardiac unruptured right sinus of valsalva aneurysm complicated with atherothrombosis

    Directory of Open Access Journals (Sweden)

    Jun Zhang

    2016-04-01

    Full Text Available We present quite a rare case of extracardiac unruptured right sinus of valsalva aneurysm (SVA complicated with atherothrombosis in a young adult man. A 35-year-old male with a giant unruptured SVA arising from the right coronary sinus (RCS with extracardiac protrusion was diagnosed by echocardiography. Contrast-enhanced computed tomography (CT revealed a huge calcified aneurysm with mural thrombi originating from the aortic root, and about 80% stenosis at the initial segment of the right coronary artery (RCA. Intraoperative exploration demonstrated a giant unruptured aneurysm arising from the RCS. Different from other SVAs reported before, this aneurismal wall appeared thick and atheromatous-like. In this aneurysm, there was a small localized intima tearing and mural thrombosis, and the orifice of the RCA was almost blocked. This patient underwent surgical patch repair to prevent aneurysm rupture and coronary artery bypass grafting for RCA revascularization. In conclusion, the pathological examination demonstrated marked foam cells, inflammatory cells, and thrombosis in the aneurismal wall. Learning points: • Echocardiographic characteristics of sinus of valsalva aneurysm (SVA. • Diagnostic evaluation of extracardiac unruptured SVA. • Pathology of rare SVA.

  12. Pulmonary artery aneurysm

    African Journals Online (AJOL)

    Enrique

    Introduction. Pulmonary artery aneurysms are a rare finding in general radiological practice. The possible causes are myriad and diverse in pathophysiolo- gy. Patients with post-stenotic dilata- tion of the main pulmonary artery usually present fairly late with insidi- ous cardiorespiratory symptoms. Diagnosis requires ...

  13. Brain Aneurysm: Recovery

    Science.gov (United States)

    ... people, but they are growing larger as medical technology continues to grow and early detection and treatment becomes more prevalent. Read More “I’ve met many people through The Brain Aneurysm Foundation. Each one with their own unique story. Of survival, of appreciation for what we still ...

  14. RANCANG BANGUN SISTEM INFORMASI PEMBAYARAN SUMBANGAN PENUNJANG PENDIDIKAN DI SMP MUHAMMADIYAH I JERUKLEGI-CILACAP

    Directory of Open Access Journals (Sweden)

    Melia Dianingrum

    2012-02-01

    Full Text Available Tujuan penelitian ini adalah membuat sistem informasi pembayaran SPP di SMP Muhammadiyah I Jeruklegi. Metode pengumpulan data yang digunakan untuk membuat aplikasi ini adalah metode kepustakaan, metode observasi, dan metode wawancara. Untuk pengembangan sistem dalam penelitian ini menggunakan metode SDLC (System Development Life Cycle, dengan teknik pengembangan sistem waterfall model dan analisis PIECES untuk menganalisis kelayakan tersebut. Hasil penelitian ini berupa aplikasi sistem pembayaran SPP di SMP Muhammadiyah I Jeruklegi-Cilacap.

  15. Penerapan Model Active Learning untuk Meremediasi Miskonsepsi Siswa pada Materi Gerak Lurus di SMP

    OpenAIRE

    Yulindar, Arvitri; Djudin, Tomo; Hamdani

    2017-01-01

    This study aims to determine effectiveness of remediation application of active learning models that have misconceptions on rectilinear motion in class VIII SMP Negeri 2 Pontianak. This research is the form of pre-experiment using a one group pretest-postest. The study sample consisted of 38 students of class VIII B SMP Negeri 2 Pontianak. Data collection technique used in the form of a measurement technique using multiple choice diagnostic tests with reason that have total 10 questions. The ...

  16. SMC SMP 24: A newly radio-detected planetary nebula in the small Magellanic cloud

    Directory of Open Access Journals (Sweden)

    Bojičić I.S.

    2010-01-01

    Full Text Available In this paper we report a new radio-continuum detection of an extragalactic planetary nebula (PN: SMC SMP 24. We show the radio-continuum image of this PN and present the measured radio data. The newly reduced radio observations are consistent with the multi-wavelength data and derived parameters found in the literature. SMC SMP 24 appears to be a young and compact PN, optically thick at frequencies below 2 GHz.

  17. SMC SMP 24: A Newly Radio-Detected Planetary Nebula in the Small Magellanic Cloud

    Directory of Open Access Journals (Sweden)

    Bojicic, I. S.

    2010-12-01

    Full Text Available In this paper we report a new radio-continuum detection of an extragalactic planetary nebula (PN: SMC~SMP~24. We show the radio-continuum image of this PN and present the measured radio data. The newly reduced radio observations are consistent with the multi-wavelength data and derived parameters found in the literature. SMC~SMP~24 appears to be a young and compact PN, optically thick at frequencies below 2~GHz.

  18. PENGEMBANGAN BAHAN AJAR DENGAN MODEL MIND MAP UNTUK PEMBELAJARAN ILMU PENGETAHUAN SOSIAL SMP

    OpenAIRE

    Lukman Lukman; Ishartiwi Ishartiwi

    2014-01-01

    Penelitian ini bertujuan untuk menghasilkan bahan ajar dengan model mind map yang layak digunakan pada pembelajaran Ilmu Pengetahuan Sosial (IPS) untuk siswa SMP, serta mengetahui keefektifan bahan ajar hasil pengembangan. Penelitian ini merupakan penelitian dan pengembangan (Research and Development). Hasil penelitian adalah sebagi berikut: (1) menghasilkan bahan ajar dengan model mind map untuk pembelajaran Ilmu Pengetahuan Sosial siswa SMP yang dikemas dalam bentuk buku dengan materi “Perk...

  19. Acidez potencial pelo método do pH SMP no Estado do Amazonas Potential acidity by pH SMP method in Amazonas State, Brazil

    Directory of Open Access Journals (Sweden)

    Adônis Moreira

    2004-01-01

    Full Text Available O objetivo deste trabalho foi definir um modelo matemático que estime o H+Al a partir do pH SMP medido em água e em solução de CaCl2 0,01 mol L-1 nas condições edafoclimáticas locais. Foram utilizadas 246 amostras de solo provenientes de diversas localidades. Mesmo apresentando menor coeficiente da correlação (r = 0,89*, a equação H+Al = 30,646 - 3,848pH SMP obtida em H2O foi mais eficiente que a obtida em solução CaCl2 (H+Al = 30,155 - 3,834pH SMP, r = 0,91*, a qual subestima os valores da acidez potencial.The objective of this work was to determine a mathematic model that estimates the potential acidity with pH SMP measured in water and in solution of CaCl2 0.01 mol L-1. Two hundred and forty six soil samples from several localities were utilized. Despite presenting a lower correlation coefficient (r = 0.89*, the equation H+Al = 30.646 - 3.848pH SMP, obtained in H2O, was more efficient than in the CaCl2 solution (H+Al = 30.155 -3.834pH SMP, r = 0.91*, since this last one underestimates the values of the potential acidity.

  20. Senescence marker protein 30 (SMP30 expression in eukaryotic cells: existence of multiple species and membrane localization.

    Directory of Open Access Journals (Sweden)

    Peethambaran Arun

    Full Text Available Senescence marker protein (SMP30, also known as regucalcin, is a 34 kDa cytosolic marker protein of aging which plays an important role in intracellular Ca(2+ homeostasis, ascorbic acid biosynthesis, oxidative stress, and detoxification of chemical warfare nerve agents. In our goal to investigate the activity of SMP30 for the detoxification of nerve agents, we have produced a recombinant adenovirus expressing human SMP30 as a fusion protein with a hemaglutinin tag (Ad-SMP30-HA. Ad-SMP30-HA transduced the expression of SMP30-HA and two additional forms of SMP30 with molecular sizes ∼28 kDa and 24 kDa in HEK-293A and C3A liver cells in a dose and time-dependent manner. Intravenous administration of Ad-SMP30-HA in mice results in the expression of all the three forms of SMP30 in the liver and diaphragm. LC-MS/MS results confirmed that the lower molecular weight 28 kDa and 24 kDa proteins are related to the 34 kDa SMP30. The 28 kDa and 24 kDa SMP30 forms were also detected in normal rat liver and mice injected with Ad-SMP30-HA suggesting that SMP30 does exist in multiple forms under physiological conditions. Time course experiments in both cell lines suggest that the 28 kDa and 24 kDa SMP30 forms are likely generated from the 34 kDa SMP30. Interestingly, the 28 kDa and 24 kDa SMP30 forms appeared initially in the cytosol and shifted to the particulate fraction. Studies using small molecule inhibitors of proteolytic pathways revealed the potential involvement of β and γ-secretases but not calpains, lysosomal proteases, proteasome and caspases. This is the first report describing the existence of multiple forms of SMP30, their preferential distribution to membranes and their generation through proteolysis possibly mediated by secretase enzymes.

  1. Dynamics of poroelastic foams

    Science.gov (United States)

    Forterre, Yoel; Sobac, Benjamin

    2010-11-01

    Soft poroelastic structures are widespread in biological tissues such as cartilaginous joints in bones, blood-filled placentae or plant organs. Here we investigate the dynamics of open elastic foams immersed in viscous fluids, as model soft poroelastic materials. The experiment consists in slowly compacting blocs of polyurethane solid foam embedded in silicon oil-tanks and studying their relaxation to equilibrium when the confining stress is suddenly released. Measurements of the local fluid pressure and foam velocity field are compared with a simple two-phase flow approach. For small initial compactions, the results show quantitative agreement with the classical diffusion theory of soil consolidation (Terzaghi, Biot). On the other hand, for large initial compactions, the dynamics exhibits long relaxation times and decompaction fronts, which are mainly controlled by the highly non-linear mechanical response of the foam. The analogy between this process and the evaporation of a polymer melt close to the glass transition will be briefly discussed.

  2. Thermal Conductivity of Foam Glass

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Yue, Yuanzheng

    Due to the increased focus on energy savings and waste recycling foam glass materials have gained increased attention. The production process of foam glass is a potential low-cost recycle option for challenging waste, e.g. CRT glass and industrial waste (fly ash and slags). Foam glass is used...... as thermal insulating material in building and chemical industry. The large volume of gas (porosity 90 – 95%) is the main reason of the low thermal conductivity of the foam glass. If gases with lower thermal conductivity compared to air are entrapped in the glass melt, the derived foam glass will contain...... only closed pores and its overall thermal conductivity will be much lower than that of the foam glass with open pores. In this work we have prepared foam glass using different types of recycled glasses and different kinds of foaming agents. This enabled the formation of foam glasses having gas cells...

  3. Tobacco smoking and aortic aneurysm

    DEFF Research Database (Denmark)

    Sode, Birgitte F; Nordestgaard, Børge; Grønbæk, Morten

    2013-01-01

    BACKGROUND: We determined the predictive power of tobacco smoking on aortic aneurysm as opposed to other risk factors in the general population. METHODS: We recorded tobacco smoking and other risk factors at baseline, and assessed hospitalization and death from aortic aneurysm in 15,072 individuals...... aneurysm in males and females consuming above 20g tobacco daily was 3.5% and 1.3%, among those >60years with plasma cholesterol >5mmol/L and a systolic blood pressure >140mmHg. CONCLUSIONS: Tobacco smoking is the most important predictor of future aortic aneurysm outcomes in the general population...

  4. mdFoam+: Advanced molecular dynamics in OpenFOAM

    Science.gov (United States)

    Longshaw, S. M.; Borg, M. K.; Ramisetti, S. B.; Zhang, J.; Lockerby, D. A.; Emerson, D. R.; Reese, J. M.

    2018-03-01

    This paper introduces mdFoam+, which is an MPI parallelised molecular dynamics (MD) solver implemented entirely within the OpenFOAM software framework. It is open-source and released under the same GNU General Public License (GPL) as OpenFOAM. The source code is released as a publicly open software repository that includes detailed documentation and tutorial cases. Since mdFoam+ is designed entirely within the OpenFOAM C++ object-oriented framework, it inherits a number of key features. The code is designed for extensibility and flexibility, so it is aimed first and foremost as an MD research tool, in which new models and test cases can be developed and tested rapidly. Implementing mdFoam+ in OpenFOAM also enables easier development of hybrid methods that couple MD with continuum-based solvers. Setting up MD cases follows the standard OpenFOAM format, as mdFoam+ also relies upon the OpenFOAM dictionary-based directory structure. This ensures that useful pre- and post-processing capabilities provided by OpenFOAM remain available even though the fully Lagrangian nature of an MD simulation is not typical of most OpenFOAM applications. Results show that mdFoam+ compares well to another well-known MD code (e.g. LAMMPS) in terms of benchmark problems, although it also has additional functionality that does not exist in other open-source MD codes.

  5. Parallel peak pruning for scalable SMP contour tree computation

    Energy Technology Data Exchange (ETDEWEB)

    Carr, Hamish A. [Univ. of Leeds (United Kingdom); Weber, Gunther H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of California, Davis, CA (United States); Sewell, Christopher M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ahrens, James P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-09

    As data sets grow to exascale, automated data analysis and visualisation are increasingly important, to intermediate human understanding and to reduce demands on disk storage via in situ analysis. Trends in architecture of high performance computing systems necessitate analysis algorithms to make effective use of combinations of massively multicore and distributed systems. One of the principal analytic tools is the contour tree, which analyses relationships between contours to identify features of more than local importance. Unfortunately, the predominant algorithms for computing the contour tree are explicitly serial, and founded on serial metaphors, which has limited the scalability of this form of analysis. While there is some work on distributed contour tree computation, and separately on hybrid GPU-CPU computation, there is no efficient algorithm with strong formal guarantees on performance allied with fast practical performance. Here in this paper, we report the first shared SMP algorithm for fully parallel contour tree computation, withfor-mal guarantees of O(lgnlgt) parallel steps and O(n lgn) work, and implementations with up to 10x parallel speed up in OpenMP and up to 50x speed up in NVIDIA Thrust.

  6. Giant serpentine intracranial aneurysm: a case report

    International Nuclear Information System (INIS)

    Park, Jae Seong; Lee, Myeong Sub; Kim, Myung Soon; Kim, Dong Jin; Park, Joong Wha; Whang, Kum

    2001-01-01

    The authors present a case of giant serpentine aneurysm (a partially thrombosed aneurysm containing tortuous vascular channels with a separate entrance and outflow pathway). Giant serpentine aneurysms form a subgroup of giant intracranial aneurysms, distinct from saccular and fusiform varieties, and in this case, too, the clinical presentation and radiographic features of CT, MR imaging and angiography were distinct

  7. Cerebral aneurysms – an audit

    African Journals Online (AJOL)

    Enrique

    Abstract. We performed an audit to determine the profile of cerebral aneurysms at the Universitas Hospital Bloem- fontein, the only government hospital with a vascular suite in the Free State and Northern Cape area. Two hun- dred and twenty-three government patients, diagnosed with cerebral aneurysms during the period.

  8. Applications of Foamed Lightweight Concrete

    Directory of Open Access Journals (Sweden)

    Mohd Sari Kamarul Aini

    2017-01-01

    Full Text Available Application of foamed concrete is increasing at present due to high demand on foamed concrete structures with good mechanical and physical properties. This paper discusses on the use of basic raw materials, their characteristics, production process, and their application in foamed lightweight concrete with densities between 300 kg/m3 and 1800 kg/m3. It also discusses the factors that influence the strengths and weaknesses of foamed concrete based on studies that were conducted previously.

  9. Dielectric and Radiative Properties of Sea Foam at Microwave Frequencies: Conceptual Understanding of Foam Emissivity

    OpenAIRE

    Peter W. Gaiser; Magdalena D. Anguelova

    2012-01-01

    Foam fraction can be retrieved from space-based microwave radiometric data at frequencies from 1 to 37 GHz. The retrievals require modeling of ocean surface emissivity fully covered with sea foam. To model foam emissivity well, knowledge of foam properties, both mechanical and dielectric, is necessary because these control the radiative processes in foam. We present a physical description of foam dielectric properties obtained from the foam dielectric constant including foam skin depth; foam ...

  10. Foams in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Marsden, S.S.

    1986-07-01

    In 1978 a literature search on selective blocking of fluid flow in porous media was done by Professor S.S. Marsden and two of his graduate students, Tom Elson and Kern Huppy. This was presented as SUPRI Report No. TR-3 entitled ''Literature Preview of the Selected Blockage of Fluids in Thermal Recovery Projects.'' Since then a lot of research on foam in porous media has been done on the SUPRI project and a great deal of new information has appeared in the literature. Therefore we believed that a new, up-to-date search should be done on foam alone, one which would be helpful to our students and perhaps of interest to others. This is a chronological survey showing the development of foam flow, blockage and use in porous media, starting with laboratory studies and eventually getting into field tests and demonstrations. It is arbitrarily divided into five-year time periods. 81 refs.

  11. Long lasting decontamination foam

    Science.gov (United States)

    Demmer, Ricky L.; Peterman, Dean R.; Tripp, Julia L.; Cooper, David C.; Wright, Karen E.

    2010-12-07

    Compositions and methods for decontaminating surfaces are disclosed. More specifically, compositions and methods for decontamination using a composition capable of generating a long lasting foam are disclosed. Compositions may include a surfactant and gelatin and have a pH of less than about 6. Such compositions may further include affinity-shifting chemicals. Methods may include decontaminating a contaminated surface with a composition or a foam that may include a surfactant and gelatin and have a pH of less than about 6.

  12. Production of lightweight foam glass (invited talk)

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Yue, Yuanzheng

    The foam glass production allows low cost recycling of postconsumer glass and industrial waste materials as foaming agent or as melt resource. Foam glass is commonly produced by utilising milled glass mixed with a foaming agent. The powder mixture is heat-treated to around 10^3.7 – 10^6 Pa s, which...... result in viscous sintering and subsequent foaming of the glass melt. The porous glass melt is cooled down to room temperature to freeze-in the foam structure. The resulting foam glass is applied in constructions as a light weight material to reduce load bearing capacity and as heat insulating material...... in buildings and industry. We foam panel glass from old televisions with different foaming agents. We discuss the foaming ability and the foaming mechanism of different foaming systems. We compare several studies to define a viscous window for preparing low density foam glass. However, preparing foam glass...

  13. Kontribusi Stabilitas Emosi Terhadap Kemampuan Pembuatan Keputusan Karier Siswa SMP

    Directory of Open Access Journals (Sweden)

    Ahmad Fajri

    2017-07-01

    Full Text Available Contributions Emotion Stability to Career Decision Making Ability of SMP Students. This research is motivated by the career decision-making abilities of students of class IX are still easily influenced by the environment, it is because students feel anxious not appropriate selection of subsequent studies. Identified emotion stability can provide a positive influence on career decision-making abilities, like not anxious, to understand the feelings of others, and is able to accept the other person's perspective. In general the studies carried out to determine the contribution of emotion stability to the career decision-making abilities of students class IX SMPN 26 Bandung Academic Year 2016/2017. The research approach using a quantitative approach to the study correlational. The samples used were all students of class IX SMPN 26 Bandung academic year of 2016/2017 as many as 286 people. The results showed that (1 the emotion stability of students that are in the category of less stable with a percentage of 66.4%, (2 the ability of making career decisions of students in the category capable with a percentage of 53.5%, (3 there is a positive contribution and significant emotion stability of 16.7% against the career decision-making abilities of students, meaning that the diversity of career decision-making ability scores of students of class IX SMPN 26 Bandung determined by emotion stability student of 16.7%. The results of this analysis can be considered state aid students in the focus of guidance and counseling services.

  14. PENDEKATAN BRAINSTORMINGROUND-ROBIN UNTUK MENINGKATKAN KEMAMPUAN KOMUNIKASIMATEMATIS SISWA SMP

    Directory of Open Access Journals (Sweden)

    Maya Siti Rohmah

    2015-07-01

    Full Text Available ABSTRAK Penelitian ini bertujuan untuk mengetahui peningkatan kemampuan komunikasi matematis siswa yang pembelajarannya menggunakan Brainstorming Round-Robin dibandingkan dengan siswa yang pembelajarannya konvensional. Penelitian kuasi eksperimen ini mengambil populasi siswa kelas VII pada salah satu SMP di kabupaten Bandung Barat dengan sampel 2 kelas. Dari dua kelas yang dipilih dalam penelitian ini, salah satunya digunakan sebagai kelas eksperimen yang memperoleh pembelajaran dengan pendekatan Brainstorming Round-Robin, sedangkan kelas lainnnya sebagai kelas kontrol yang pembelajarannya konvensional. Kedua kelompok diberikan pretes dan postes kemampuan komunikasi matematis. Data N-gain yang diperoleh diuji secara kuantitatif dengan uji perbedaan rerata nonparametrik Mann-Whitney. Hasil penelitian menunjukkan bahwa peningkatan kemampuan komunikasi matematis siswa yang mendapat pembelajaran dengan menggunakan pendekatan Brainstorming Round-Robin lebih baik daripada siswa yang pembelajarannya konvensional. Kata Kunci    :     Brainstorming Round-Robin, KomunikasiMatematis     ABSTRACT The aims of these research are to determine anincrease in mathematics communication of students who obtain learning using Round-Robin Brainstormingbetter thanstudents who receivedconventional learning. This quasi experimental take population all students at class VII in one of public secondary school in West Bandung district with 2 classes as sample. From this 2 classes choosen in this research, one of them as an experimental classthatacquirelearningwithRound-Robin Brainstormingapproach, and the other one as acontrol class that receive conventional learning. Both groups weregiven thepretest and posttest of mathematics communication. N-gain data obtainedquantitatively,testedwitha meandifference testnonparametricMann-Whitney. The results showedthat an achievement and increase inmathematics communication of students thatgetslearning using

  15. PENYELENGGARAAN PROGRAN SD-SMP SATU ATAP DALAM LATAR BUDAYA RUMAH BETANG KALIMANTAN TENGAH

    Directory of Open Access Journals (Sweden)

    Rudi Hasan

    2014-06-01

    Abstrak: Penyelenggaraan Progran SD-SMP Satu Atap dalam Latar Budaya Rumah Betang Kali­mantan Tengah. Penelitian ini bertujuan untuk mendeskripsikan penyelengaaraan program SD-SMP Satu Atap dalam latar budaya rumah Betang Kalimantan Tengah yang dikaitkan dengan struktur birokrasi, sumber daya, dan komunikasi. Penelitian kualitatif dilaksanakan di tiga lokasi, yaitu pada SMPN Satu Atap 1 Mihing Raya, SMPN Satu Atap 2 Kurun, dan SMPN Satu Atap 3 Tewah di Kabupaten Gunung Mas, Propinsi Kalimantan Tengah. Hasil penelitian menunjukkan bahwa acuan standar yang jelas, koordinasi yang intensif, dan pemberdayaan sumber daya manusia yang tepat sesuai dengan pendekatan nilai-nilai budaya rumah Betang dapat mencapai penyelenggaraan program SD-SMP Satu Atap yang efektif. Hal itu juga didukung oleh pengelolaan sumberdaya dan komunikasi yang mendasarkan diri pada nilai kekeluargaan, kebersamaan, loyalitas, dan keakraban.

  16. Pengembangan LKS Untuk Melatih Kemampuan Berpikir Kritis dalam Mata Pelajaran Matematika di Kelas VII SMP

    Directory of Open Access Journals (Sweden)

    Puji Astuti

    2017-10-01

    Full Text Available Tujuan pembelajaran matematika adalah untuk melatih siswa berpikir kritis. Oleh karena itu, perlu dikembangkan Lembar Kerja Siswa (LKS untuk melatih kemampuan berpikir kritis siswa. Penelitian ini bertujuan untuk menghasilkan LKS yang berkarakteristik untuk melatih kemampuan berpikir kritis siswa kelas VII SMP. Sampel pada penelitian ini adalah kelas VII7 berjumlah 30 siswa semester II SMP Negeri 9 Palembang. Metode penelitian yang digunakan adalah metode penelitian pengembangan yang terdiri dari analisis, desain, evaluasi dan revisi. Pengumpulan data dilakukan dengan cara prototyping.  Prototyping dilakukan untuk mengetahui bagaimana karakteristik LKS untuk melatih kemampuan berpikir kritis siswa kelas VII SMP. Hasil penelitian ini adalah karakteristik LKS untuk melatih kemampuan berpikir kritis siswa kelas VII SMP. Kata kunci: Kemampuan berpikir kritis, Lembar Kerja Siswa    Mathematics learning aims to develop students critical thinking. Therefore, it is necessary to develop Student Worksheet to train students' critical thinking skills. This research aims to develop student worksheet that has characteristics of critical thinking skill for 7th grade Junior High School students (SMP. The sample in this research is VII7 class with 30 students of the second semester of SMP Negeri 9 Palembang. The research method used is a development research method that consists of analysis, design, evaluation and revision. Data collection is done by prototyping. Prototyping was used to find out how the characteristics of student worksheet to develop critical thinking ability of grade  7th students. The result of this research is characteristic of student worksheet to develop critical thinking ability of 7th grade Junior High School student. Keywords: critical thinking ability, student worksheet

  17. Constitutive modeling of SMA SMP multifunctional high performance smart adaptive shape memory composite

    International Nuclear Information System (INIS)

    Jarali, Chetan S; Raja, S; Upadhya, A R

    2010-01-01

    Materials design involving the thermomechanical constitutive modeling of shape memory alloy (SMA) and shape memory polymer (SMP) composites is a key topic in the development of smart adaptive shape memory composites (SASMC). In this work, a constitutive model for SASMC is developed. First, a one-dimensional SMA model, which can simulate the pseudoelastic (PE) and shape memory effects (SME) is presented. Subsequently, a one-dimensional SMP model able to reproduce the SME is addressed. Both SMA and SMP models are based on a single internal state variable, namely the martensite fraction and the frozen fraction, which can be expressed as a function of temperature. A consistent form of the analytical solution for the SMP model is obtained using the fourth-order Runge–Kutta method. Finally, the SASMC constitutive model is proposed, following two analytical homogenization approaches. One approach is based on an equivalent inclusion method and the other approach is the rule of mixtures. The SMA and SMP constitutive models are validated independently with experimental results. However, the validation of the composite model is performed using the two homogenization approaches and a close agreement in results is observed. Results regarding the isothermal and thermomechanical stress–strain responses are analyzed as a function of SMA volume fraction. Further, it is concluded that the proposed composite model is able to reproduce consistently the overall composite response by taking into consideration not only the phase transformations, variable modulus and transformation stresses in SMA but also the variable modulus, the evolution of stored strain and thermal strain in the SMP

  18. Flexible polyurethane foams

    NARCIS (Netherlands)

    2012-01-01

    Embodiments of the invention provide for a method of preparing a polyurethane foam, including reacting least one initiator comprising at least two hydroxyl groups with at least one 12-hydroxystearic acid to form at least one polyester polyol, reacting the at least one polyester polyol with at least

  19. Right hepatic artery aneurysm.

    Science.gov (United States)

    Bernal, Astrid Del Pilar Ardila; Loures, Paulo; Calle, Juan Cristóbal Ospina; Cunha, Beatriz; Córdoba, Juan Camilo

    2016-01-01

    We report a case of an aneurysm of the right hepatic artery and its multidisciplinary management by general surgery, endoscopy and radiology services. Being a case of extremely low incidence, it is important to show its diagnostic and therapeutic approach. RESUMO Relatamos um caso de aneurisma da artéria hepática direita conduzido de forma multidisciplinar pelos Serviços de Cirurgia Geral, Endoscopia e Radiologia. Em se tratando de caso de incidência baixíssima, é importante mostrar o enfoque diagnóstico e terapêutico usado em seu manejo.

  20. PENGEMBANGAN PAKET PELATIHAN KEMANDIRIAN BELAJAR DENGAN STRATEGI INDIVIDUAL LEARNING PLAN UNTUK SISWA SMP

    Directory of Open Access Journals (Sweden)

    Tri Cahyono

    2016-12-01

    Pengelolaan belajar yang dilakukan secara mandiri, memungkinkan siswa untuk belajar sesuai minat dan tanpa paksaan dari pihak lain sehingga akan berdampak positif terhadap prestasi belajar yang diraihnya. Penelitian ini bertujuan untuk mengembangkan paket pelatihan kemandirian belajar dengan menggunakan strategi individual learning plan untuk siswa SMP. Pengembangan paket pelatihan ini menggunakan model penelitian pengembangan Borg & Gall (1983. Berdasarkan hasil penilaian ahli dan pengguna, paket pelatihan kemandirian belajar dengan menggunakan strategi individual learning plan untuk siswa SMP telah memenuhi kriteria kelayakan dan keberterimaan. Uji efektivitas kepada berbagai subjek yang berbeda perlu dilakukan pada penelitian selanjutnya sehingga kekurangan paket pelatihan yang dikembangkan dalam pelatihan ini bisa disempurnakan.

  1. Primary extracranial vertebral artery aneurysms.

    Science.gov (United States)

    Morasch, Mark D; Phade, Sachin V; Naughton, Peter; Garcia-Toca, Manuel; Escobar, Guillermo; Berguer, Ramon

    2013-05-01

    Extracranial vertebral artery aneurysms are uncommon and are usually associated with trauma or dissection. Primary cervical vertebral aneurysms are even rarer and are not well described. The presentation and natural history are unknown and operative management can be difficult. Accessing aneurysms at the skull base can be difficult and, because the frail arteries are often afflicted with connective tissue abnormalities, direct repair can be particularly challenging. We describe the presentation and surgical management of patients with primary extracranial vertebral artery aneurysms. In this study we performed a retrospective, multi-institutional review of patients with primary aneurysms within the extracranial vertebral artery. Between January 2000 and January 2011, 7 patients, aged 12-56 years, were noted to have 9 primary extracranial vertebral artery aneurysms. All had underlying connective tissue or another hereditary disorder, including Ehler-Danlos syndrome (n=3), Marfan's disease (n=2), neurofibromatosis (n=1), and an unspecified connective tissue abnormality (n=1). Eight of 9 aneurysms were managed operatively, including an attempted bypass that ultimately required vertebral ligation; the contralateral aneurysm on this patient has not been treated. Open interventions included vertebral bypass with vein, external carotid autograft, and vertebral transposition to the internal carotid artery. Special techniques were used for handling the anastomoses in patients with Ehler-Danlos syndrome. Although endovascular exclusion was not performed in isolation, 2 hybrid procedures were performed. There were no instances of perioperative stroke or death. Primary extracranial vertebral artery aneurysms are rare and occur in patients with hereditary disorders. Operative intervention is warranted in symptomatic patients. Exclusion and reconstruction may be performed with open and hybrid techniques with low morbidity and mortality. Copyright © 2013 Elsevier Inc. All rights

  2. Foam, Foam-resin composite and method of making a foam-resin composite

    Science.gov (United States)

    Cranston, John A. (Inventor); MacArthur, Doug E. (Inventor)

    1995-01-01

    This invention relates to a foam, a foam-resin composite and a method of making foam-resin composites. The foam set forth in this invention comprises a urethane modified polyisocyanurate derived from an aromatic amino polyol and a polyether polyol. In addition to the polyisocyanurate foam, the composite of this invention further contains a resin layer, wherein the resin may be epoxy, bismaleimide, or phenolic resin. Such resins generally require cure or post-cure temperatures of at least 350.degree. F.

  3. MR angiography of cerebral aneurysms

    International Nuclear Information System (INIS)

    Miki, Hitoshi; Tanada, Shuji; Sakaki, Saburo; Hamamoto, Ken; Sadamoto, Kazuhiko.

    1992-01-01

    Time-of-flight (TOF) MR angiography (MRA) and phase-contrast (PC) MRA are examined clinically for evaluating cerebral aneurysms. In the morphological diagnosis of cerebral aneurysms, three-dimensional (3D) MRA is superior to two-dimensional (2D) MRA because 3D MRA has a higher S/N ratio and a higher spatial resolution. However, it is difficult to decide which, 3D TOF MRA or 3D PC MRA, is superior, for both methods have many scan parameters. In our study, 3D PC MRA was performed using two methods; one had the same acquisition time as 3D TOF MRA, while the other had the same spatial resolution as 3D TOF MRA. The detectability of aneurysms by each MRA method was evaluated in comparison with 3D TOF MRA. In fifteen patients (6 males and 9 females), a total of 16 cerebral aneurysms (3 ruptured and 13 unruptured) were studied. The lesion sizes ranged from 2.5 to 18 mm. All the 16 lesions were examined by means of 3D TOF MRA, 3D PC MRA, and conventional angiography. MR imaging was performed with a 1.5 tesla MRI system (Signa). All of the 16 cerebral aneurysms were detected by 3D TOF MRA, while only 11 of them were detected by 3D PC MRA. When 3D PC MRA was performed with the same acquisition time as 3D TOF MRA, 3D PC MRA was superior in showing one of the 7 aneurysms. When 3D PC MRA was performed with same spatial resolution as 3D TOF MRA, 3D PC MRA was superior in showing two of the 10 aneurysms. 3D TOF MRA was superior to 3D PC MRA in the detection of cerebral aneurysms because of the long acquisition times and the different flow velocity, which induced different signal intensities between the aneurysms and parent arteries in 3D PC MRA. 3D PC MRA was superior to 3D TOF MRA in patients with large thrombotic aneurysms of the internal carotid artery. We consider that 3D TOF MRA should be the first choice for screening and following-up cerebral aneurysms. 3D PC MRA should then be performed for large cerebral aneurysms in addition to 3D TOF MRA. (author)

  4. Fluid, solid and fluid-structure interaction simulations on patient-based abdominal aortic aneurysm models.

    Science.gov (United States)

    Kelly, Sinead; O'Rourke, Malachy

    2012-04-01

    This article describes the use of fluid, solid and fluid-structure interaction simulations on three patient-based abdominal aortic aneurysm geometries. All simulations were carried out using OpenFOAM, which uses the finite volume method to solve both fluid and solid equations. Initially a fluid-only simulation was carried out on a single patient-based geometry and results from this simulation were compared with experimental results. There was good qualitative and quantitative agreement between the experimental and numerical results, suggesting that OpenFOAM is capable of predicting the main features of unsteady flow through a complex patient-based abdominal aortic aneurysm geometry. The intraluminal thrombus and arterial wall were then included, and solid stress and fluid-structure interaction simulations were performed on this, and two other patient-based abdominal aortic aneurysm geometries. It was found that the solid stress simulations resulted in an under-estimation of the maximum stress by up to 5.9% when compared with the fluid-structure interaction simulations. In the fluid-structure interaction simulations, flow induced pressure within the aneurysm was found to be up to 4.8% higher than the value of peak systolic pressure imposed in the solid stress simulations, which is likely to be the cause of the variation in the stress results. In comparing the results from the initial fluid-only simulation with results from the fluid-structure interaction simulation on the same patient, it was found that wall shear stress values varied by up to 35% between the two simulation methods. It was concluded that solid stress simulations are adequate to predict the maximum stress in an aneurysm wall, while fluid-structure interaction simulations should be performed if accurate prediction of the fluid wall shear stress is necessary. Therefore, the decision to perform fluid-structure interaction simulations should be based on the particular variables of interest in a given

  5. PENINGKATAN SOFT SKILLS SISWA SMP MELALUI PEMBELAJARAN GENERATIF

    Directory of Open Access Journals (Sweden)

    La Moma

    2015-06-01

    Full Text Available Abstrak: Soft skills merupakan faktor yang turut menunjang kesuksesan siswa belajar matematika. Perlu ada upaya untuk menerapkan suatu model pembelajaran yang dapat memicu peningkatan soft skills siswa dalam matematika. Penelitian ini menerapkan model pembelajaran generatif sebagai alternatif pembelajaran yang diperkirakan akan memicu peningkatan ketiga kemampuan tersebut. Tujuan penelitian untuk mengetahui seberapa besar kontribusi penerapan model tersebut terhadap peningkatan kemampuan soft skills pada level sekolah (tinggi, sedang dan rendah. Penelitian menerapkan desain kuasi eksperimen. Sampel terdiri atas 191 orang siswa kelas VIII pada tiga SMP Negeri di Kota Yogyakarta yang mewakili level sekolah. Pengumpulan data dilakukan dengan teknik tes (pretes dan postes, sedang analisis data menggunakan statistik uji-t dan anova dua jalur. Dari hasil analisis data ditemukan bahwa (1 ada perbedaan pencapaian, peningkatan soft skills siswa antara kelas eksperimen dan kelas kontrol; (2 tidak terdapat interaksi antara pembelajaran dan level sekolah terhadap peningkatan soft skills. Kata Kunci: kemampuan soft skills, pembelajaran generatif THE ENHANCEMENT OF JUNIOR HIGH SCHOOL STUDENTS SOFT SKILLS THROUGH GENERATIVE LEARNING Abstract: Soft skills are factors that support students success in learning mathematics. The importance of the students soft skills, unfortunately, are not in line with at the students abilities in these competence. Therefore, we have to implemented a learning model that is expected to lead development soft skills of the students in mathematics. Generative learning model is applied in this study as an alternative learning is predicted to stimulate development soft skills of the students. This study is aimed at determining the contribution of generative learning model of the enhancement of soft skills for difference school levels (high, medium, low.This study is quasi-experimental research involving 191 students of eight

  6. Endovascular treatment of PICA aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Mukonoweshuro, W.; Laitt, R.D.; Hughes, D.G. [Radiology Dept., Greater Manchester Neurosciences Unit, Hope Hospital, Salford, Manchester (United Kingdom)

    2003-03-01

    Endovascular treatment of aneurysms of the posterior inferior cerebellar artery (PICA) avoids manipulation of the brainstem or lower cranial nerves and should therefore carry a lower risk of neurological morbidity than surgical clipping. We reviewed our experience of 23 patients with PICA aneurysms treated by endovascular occlusion with Guglielmi detachable coils and documented their long-term outcome on follow-up. We observed a 28 day procedure-related neurological morbidity of 13% (3/23 patients). One patient suffered permanent neurological complications. There were no procedure-related deaths. None of our patients suffered a re-bleed from their treated aneurysms. Our series shows endovascular treatment of ruptured PICA aneurysms to be safe and effective. (orig.)

  7. Postprocedural Monitoring of Cerebral Aneurysms

    International Nuclear Information System (INIS)

    Kaehaerae, V.

    2006-01-01

    The treatment of intracranial aneurysms has been revolutionized since the introduction of electrolytically detachable platinum coils in 1991. Since this basic innovation, many refinements of the embolic materials and techniques have emerged. Today, in Europe, half of all aneurysms are treated endoarterially and this share is growing. The reassuring results of the International Subarachnoid Aneurysm Trial (ISAT) have changed the treatment strategy from neurosurgical clipping to embolization. However, the role of these alternative modes of treatment varies between institutions and countries. An angiographic follow-up pattern after endovascular treatment has remained largely undefined and in the same way there has been much diversity in applying alternative imaging modalities. Although some institutions continue to perform intervalled digital subtraction angiography, magnetic resonance angiography has assumed an increasing role. A vast majority of patients with embolized aneurysms are eligible to be monitored solely by non-contrast three-dimensional time-of-flight technique

  8. Management of aneurysmal subarachnoid hemorrhage.

    Science.gov (United States)

    Etminan, N; Macdonald, R L

    2017-01-01

    Spontaneous subarachnoid hemorrhage (SAH) affects people with a mean age of 55 years. Although there are about 9/100 000 cases per year worldwide, the young age and high morbidity and mortality lead to loss of many years of productive life. Intracranial aneurysms account for 85% of cases. Despite this, the majority of survivors of aneurysmal SAH have cognitive deficits, mood disorders, fatigue, inability to return to work, and executive dysfunction and are often unable to return to their premorbid level of functioning. The main proven interventions to improve outcome are aneurysm repair in a timely fashion by endovascular coiling rather than neurosurgical clipping when feasible and administration of nimodipine. Management also probably is optimized by neurologic intensive care units and multidisciplinary teams. Improved diagnosis, early aneurysm repair, administration of nimodipine, and advanced neurointensive care support may be responsible for improvement in survival from SAH in the last few decades. © 2017 Elsevier B.V. All rights reserved.

  9. An efficient implementation of parallel molecular dynamics method on SMP cluster architecture

    International Nuclear Information System (INIS)

    Suzuki, Masaaki; Okuda, Hiroshi; Yagawa, Genki

    2003-01-01

    The authors have applied MPI/OpenMP hybrid parallel programming model to parallelize a molecular dynamics (MD) method on a symmetric multiprocessor (SMP) cluster architecture. In that architecture, it can be expected that the hybrid parallel programming model, which uses the message passing library such as MPI for inter-SMP node communication and the loop directive such as OpenMP for intra-SNP node parallelization, is the most effective one. In this study, the parallel performance of the hybrid style has been compared with that of conventional flat parallel programming style, which uses only MPI, both in cases the fast multipole method (FMM) is employed for computing long-distance interactions and that is not employed. The computer environments used here are Hitachi SR8000/MPP placed at the University of Tokyo. The results of calculation are as follows. Without FMM, the parallel efficiency using 16 SMP nodes (128 PEs) is: 90% with the hybrid style, 75% with the flat-MPI style for MD simulation with 33,402 atoms. With FMM, the parallel efficiency using 16 SMP nodes (128 PEs) is: 60% with the hybrid style, 48% with the flat-MPI style for MD simulation with 117,649 atoms. (author)

  10. 78 FR 21610 - Expansion Funds for the Support of the Senior Medicare Patrol (SMP) Program

    Science.gov (United States)

    2013-04-11

    ... Grants. Announcement Type: Health Care Fraud Prevention Program Expansion Capacity. Funding Opportunity... DEPARTMENT OF HEALTH AND HUMAN SERVICES Administration for Community Living Expansion Funds for the Support of the Senior Medicare Patrol (SMP) Program ACTION: Notice of intent to provide expansion...

  11. Aerosol-foam interaction experiments

    International Nuclear Information System (INIS)

    Ball, M.H.E.; Luscombe, C.DeM.; Mitchell, J.P.

    1990-03-01

    Foam treatment offers the potential to clean gas streams containing radioactive particles. A large decontamination factor has been claimed for the removal of airborne plutonium dust when spraying a commercially available foam on the walls and horizontal surfaces of an alpha-active room. Experiments have been designed and undertaken to reproduce these conditions with a non-radioactive simulant aerosol. Careful measurements of aerosol concentrations with and without foam treatment failed to provide convincing evidence to support the earlier observation. The foam may not have been as well mixed with the aerosol in the present studies. Further work is required to explore more efficient mixing methods, including systems in which the aerosol steam is passed through the foam, rather than merely spraying foam into the path of the aerosol. (author)

  12. Chaotic bubbling and nonstagnant foams.

    Science.gov (United States)

    Tufaile, Alberto; Sartorelli, José Carlos; Jeandet, Philippe; Liger-Belair, Gerard

    2007-06-01

    We present an experimental investigation of the agglomeration of bubbles obtained from a nozzle working in different bubbling regimes. This experiment consists of a continuous production of bubbles from a nozzle at the bottom of a liquid column, and these bubbles create a two-dimensional (2D) foam (or a bubble raft) at the top of this column. The bubbles can assemble in various dynamically stable arrangement, forming different kinds of foams in a liquid mixture of water and glycerol, with the effect that the bubble formation regimes influence the foam obtained from this agglomeration of bubbles. The average number of bubbles in the foam is related to the bubble formation frequency and the bubble mean lifetime. The periodic bubbling can generate regular or irregular foam, while a chaotic bubbling only generates irregular foam.

  13. Foams structure and dynamics

    CERN Document Server

    Cantat, Isabelle; Graner, François; Pitois, Olivier; Höhler, Reinard; Elias, Florence; Saint-Jalmes, Arnaud; Rouyer, Florence

    2013-01-01

    This book is the first to provide a thorough description of all aspects of the physico-chemical properties of foams. It sets out what is known about their structure, their stability, and their rheology. Engineers, researchers and students will find descriptions of all the key concepts, illustrated by numerous applications, as well as experiments and exercises for the reader. A solutions manual for lecturers is available via the publisher's web site.

  14. Pourable Foam Insulation

    Science.gov (United States)

    Harvey, James A.; Butler, John M.; Chartoff, Richard P.

    1989-01-01

    Report describes search for polyisocyanurate/polyurethane foam insulation with superior characteristics. Discusses chemistry of current formulations. Tests of formulations, of individual ingredients and or alternative new formulations described. Search revealed commercially available formulations exhibiting increased thermal stability at temperatures up to 600 degree C, pours readily before curing, presents good appearance after curing, and remains securely bonded to aluminum at cryogenic temperatures. Total of 42 different formulations investigated, 10 found to meet requirements.

  15. UPAYA MENINGKATKAN PEROLEHAN KOSAKATA DALAM PEMAHAMAN MEMBACA BAHASA INGGRIS MENGGUNAKAN VSS PADA SISWA SMP

    Directory of Open Access Journals (Sweden)

    Windarti Windarti

    2016-06-01

    Full Text Available Penelitian ini bertujuan untuk meningkatkan perolehan kosakata dalam pemahaman membaca bahasa Inggris menggunakan Vocabulary Self-Collection Strategy (VSS siswa kelas VII SMP Negeri 3 Kalasan. Metode penelitian yang digunakan yaitu penelitian tindakan kelas (PTK, yang terdiri dari dua siklus. Tiap siklus terdiri dari empat tahap, yaitu perencanaan, pelaksanaan, pengamatan, dan refleksi. Subjek penelitian ini adalah 32 siswa kelas VII B SMP Negeri 3 Kalasan tahun ajaran 2013/2014. Teknik pengumpulan data yang digunakan yaitu observasi, tes, dan wawancara. Analisis data yang digunakan yaitu deskriptif kuantitatif dan deskriptif kualitatif. Hasil penelitian ini menunjukan bahwa penerapan strategi VSS dapat digunakan untuk meningkatkan perolehan kosakata dalam pemahaman membaca bahasa Inggris. Peningkatan hasil belajar siswa ditunjukkan dengan meningkatnya jumlah siswa yang lulus standar KKM pada siklus I dan II. Nilai rata-rata tes pada siklus I adalah 77,2. Nilai rata-rata tes pada siklus II adalah 82,4. Kesimpulan pada penelitian ini adalah bahwa penerapan strategi VSS dapat meningkatkan perolehan kosakata bahasa Inggris dalam pemahaman membaca siswa kelas VII SMP Negeri 3 Kalasan. Kata kunci: VSS, perolehan kosakata, pemahaman membaca bahasa Inggris. THE EFFORT TO IMPROVE VOCABULARY ACQUISITION IN ENGLISH READING COMPREHENSION USING VSS ON THE STUDENTS OF SMP Abstract This study aims to improve vocabulary acquisition in English reading comprehension using Vocabulary Self-Collection Strategy (VSS on the seventh grade students of SMP Negeri 3 Kalasan. This was an action reserch study consisting of two cycles. Each cycle consisted of four steps, namely planning, implementation, observation, and reflection. The research subjects were 32 seventh grade students of SMP 3 Kalasan in the academic year of 2013/2014. The data were collected through observation, tests, and interviews and analyzed by means of quantitative and qualitative descriptive

  16. Polyimide Foams Offer Superior Insulation

    Science.gov (United States)

    2012-01-01

    At Langley Research Center, Erik Weiser and his colleagues in the Advanced Materials and Processing Branch were working with a new substance for fabricating composites for use in supersonic aircraft. The team, however, was experiencing some frustration. Every time they tried to create a solid composite from the polyimide (an advanced polymer) material, it bubbled and foamed. It seemed like the team had reached a dead end in their research - until they had another idea. "We said, This isn t going to work for composites, but maybe we could make a foam out of it," Weiser says. "That was kind of our eureka moment, to see if we could go in a whole other direction. And it worked." Weiser and his colleagues invented a new kind of polyimide foam insulation they named TEEK. The innovation displayed a host of advantages over existing insulation options. Compared to other commercial foams, Weiser explains, polyimide foams perform well across a broad range of temperatures, noting that the NASA TEEK foams provide effective structural insulation up to 600 F and down to cryogenic temperatures. The foam does not burn or off-gas toxic fumes, and even at -423 F - the temperature of liquid hydrogen - the material stays flexible. The inventors could produce the TEEK foam at a range of densities, from 0.5 pounds per cubic foot up to 20 pounds per cubic foot, making the foam ideal for a range of applications, including as insulation for reusable launch vehicles and for cryogenic tanks and lines. They also developed a unique, friable balloon format for manufacturing the foam, producing it as hollow microspheres that allowed the foam to be molded and then cured into any desired shape - perfect for insulating pipes of different sizes and configurations. The team s originally unplanned invention won an "R&D 100" award, and a later form of the foam, called LaRC FPF-44 (Spinoff 2009), was named "NASA Invention of the Year" in 2007.

  17. Cryogenic foam insulation: Abstracted publications

    Science.gov (United States)

    Williamson, F. R.

    1977-01-01

    A group of documents were chosen and abstracted which contain information on the properties of foam materials and on the use of foams as thermal insulation at cryogenic temperatures. The properties include thermal properties, mechanical properties, and compatibility properties with oxygen and other cryogenic fluids. Uses of foams include applications as thermal insulation for spacecraft propellant tanks, and for liquefied natural gas storage tanks and pipelines.

  18. Abdominal aortic aneurysms

    DEFF Research Database (Denmark)

    Lindholt, Jes S.

    2010-01-01

    Although the number of elective operations for abdominal aortic aneurysms (AAA) is increasing, the sex- and age-standardised mortality rate of AAAs continues to rise, especially among men aged 65 years or more. The lethality of ruptured AAA continues to be 80-95%, compared with 5-7% by elective...... surgery of symptomfree AAA. In order to fulfil all WHO, European, and Danish criteria for screening, a randomised hospitalbased screening trial of 12,639 65-73 year old men in Viborg County (Denmark) was initiated in 1994. It seemed that US screening is a valid, suitable and acceptable method of screening...... patients without previous hospital discharge diagnoses due to cardiovascular disease than among similar men without AAA. The absolute risk difference after 5 years was 16%. So, they will benefit from general cardiovascular preventive action as smoking cessation, statins and low-dose aspirin, which could...

  19. Abdominal aortic aneurysm surgery

    DEFF Research Database (Denmark)

    Gefke, K; Schroeder, T V; Thisted, B

    1994-01-01

    The goal of this study was to identify patients who need longer care in the ICU (more than 48 hours) following abdominal aortic aneurysm (AAA) surgery and to evaluate the influence of perioperative complications on short- and long-term survival and quality of life. AAA surgery was performed in 553...... patients, 51 (9%) of whom died within the first 48 hours. Of the 502 patients who survived for more than 48 hours, 109 required ICU therapy for more than 48 hours, whereas 393 patients were in the ICU for less than 48 hours. The incidence of preoperative risk factors was similar for the two groups...... combined failed to permit identification of patients in whom the perioperative survival rate was 0%. Even 20% of patients with multiorgan failure survived for 6 months. Of those patients who needed ICU therapy for more than 48 hours, 41 (38%) were alive at the end of 1988. In response to a questionnaire...

  20. Microsurgical treatment of carotid-ophthalmic aneurysm associated with multiple anterior and posterior circulation aneurysms

    Science.gov (United States)

    Wang, Jiantao; Kan, Zhisheng; Wang, Shuo

    2017-01-01

    Abstract Background: The clipping of multiple intracranial aneurysms in 1 stage is uncommon. In this case, we report clipping of an ophthalmic aneurysm associated with multiple anterior and posterior circulation aneurysms via the Dolenc approach. Methods: The main symptoms of the patient are headache, along with nausea and vomiting. The patient's arteriogram revealed a wide-necked aneurysm of the right ophthalmic artery, an irregular aneurysm of the anterior communicating artery, and a basilar artery aneurysm. The surgical intervention for these aneurysms is a challenge because of the complex anatomical relationship with the surrounding structures. The 3 aneurysms, which were not amenable to a single intervention, were successfully clipped in 1 incision. Results: After surgery, the patient reported feeling well. One year after surgery, the patient had no SAH recurrence. Conclusions: Occasionally, surgical treatment was used even for aneurysms of the carotid-ophthalmic artery with aneurysms of anterior communicating artery and basilar artery, which are contraindicated for interventional therapy. PMID:28422878

  1. Foam injection method and system

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, W C; Parmley, J B; Shepard, J C

    1977-05-10

    A method is described for more efficiently practicing in situ combustion techniques by generating a gas-water mist or foam adjacent to the combustion formation within the injection well. The mist or foam is forced out of the well into the formation to transport heat away from the burned region of the formation toward the periphery of the combustion region to conserve fuel. Also taught are a method and system for fluid treating a formation while maintaining enhanced conformance of the fluid injection profile by generating a mist or foam down-hole adjacent to the formation and then forcing the mist or foam out into the formation. (19 claims)

  2. Polyurethane Foams with Pyrimidine Rings

    Directory of Open Access Journals (Sweden)

    Kania Ewelina

    2014-09-01

    Full Text Available Oligoetherols based on pyrimidine ring were obtained upon reaction of barbituric acid with glycidol and alkylene carbonates. These oligoetherols were then used to obtain polyurethane foams in the reaction of oligoetherols with isocyanates and water. The protocol of foam synthesis was optimized by the choice of proper kind of oligoetherol and synthetic composition. The thermal resistance was studied by dynamic and static methods with concomitant monitoring of compressive strength. The polyurethane foams have similar physical properties as the classic ones except their enhanced thermal resistance. They stand long-time heating even at 200°C. Moreover thermal exposition of foams results generally in increase of their compressive strength.

  3. Snowpack spatial and temporal variability assessment using SMP high-resolution penetrometer

    Science.gov (United States)

    Komarov, Anton; Seliverstov, Yuriy; Sokratov, Sergey; Grebennikov, Pavel

    2017-04-01

    This research is focused on study of spatial and temporal variability of structure and characteristics of snowpack, quick identification of layers based on hardness and dispersion values received from snow micro penetrometer (SMP). We also discuss the detection of weak layers and definition of their parameters in non-alpine terrain. As long as it is the first SMP tool available in Russia, our intent is to test it in different climate and weather conditions. During two separate snowpack studies in plain and mountain landscapes, we derived density and grain size profiles by comparing snow density and grain size from snowpits and SMP measurements. The first case study was MSU meteorological observatory test site in Moscow. SMP data was obtained by 6 consecutive measurements along 10 m transects with a horizontal resolution of approximately 50 cm. The detailed description of snowpack structure, density, grain size, air and snow temperature was also performed. By comparing this information, the detailed scheme of snowpack evolution was created. The second case study was in Khibiny mountains. One 10-meter-long transect was made. SMP, density, grain size and snow temperature data was obtained with horizontal resolution of approximately 50 cm. The high-definition profile of snowpack density variation was acquired using received data. The analysis of data reveals high spatial and temporal variability in snow density and layer structure in both horizontal and vertical dimensions. It indicates that the spatial variability is exhibiting similar spatial patterns as surface topology. This suggests a strong influence from such factors as wind and liquid water pressure on the temporal and spatial evolution of snow structure. It was also defined, that spatial variation of snowpack characteristics is substantial even within homogeneous plain landscape, while in high-latitude mountain regions it grows significantly.

  4. Hubungan Kecemasan Sosial dan Kematangan Emosi dengan Kematangan Seksual Remaja SMP di Kabupaten Bantul Yogyakarta

    Directory of Open Access Journals (Sweden)

    Endang Sri Lestari

    2012-06-01

    Full Text Available This research aims to find out some factors related to the sexual maturity, such as the social anxiety and emotional maturity on the adolescents of the SMP in Kabupaten Bantul, Yogyakarta. The hypotheses which are presented in this research are: First; there is a relation between the social anxiety and emotional maturity towards the sexual maturity; Second, there is a negative relation between the social anxiety and sexual maturity; Third, there is a positive relation between the emotional maturity and sexual maturity.The research participants were 70 male and female adolescents in SMP N 2 Banguntapan, Kabupaten Bantul. The data gathering was carried out in two phases, First, by applying the sampling area technique in order to determine the research location and Second, by applying the cluster random sampling technique to determine the research sample subject. Meanwhile, the research instrument which was employed was the scale of social anxiety, emotional maturity and sexual adolescents maturity. The double-regression technique was applied to analyze the data in this research.The result of this research showed that: First, there was a relation between social anxiety and emotional maturity towards the sexual maturity in adolescentsof the SMP in Kabupaten Bantul, Yogyakarta (R=0,667, R2=0,445, F-regression= 26,911 and the significant level for about p< 0,01. Second, there was a negative relation between the social anxiety and sexual maturity in adolescentof the SMP in Kabupaten Bantul, Yogyakarta (R partial=0,632, p=0,01. Third, there was a positive relation between the emotional maturity and sexual maturity in adolescebtsof the SMP in Kabupaten Bantul, Yogyakarta (R partial=0,358, level p<0,01.Key words:  Sexual Maturity, Social Anxiety, Emotional Maturity.

  5. The flagellar protein FLAG1/SMP1 is a candidate for Leishmania-sand fly interaction.

    Science.gov (United States)

    Di-Blasi, Tatiana; Lobo, Amanda R; Nascimento, Luanda M; Córdova-Rojas, Jose L; Pestana, Karen; Marín-Villa, Marcel; Tempone, Antonio J; Telleria, Erich L; Ramalho-Ortigão, Marcelo; McMahon-Pratt, Diane; Traub-Csekö, Yara M

    2015-03-01

    Leishmaniasis is a serious problem that affects mostly poor countries. Various species of Leishmania are the agents of the disease, which take different clinical manifestations. The parasite is transmitted by sandflies, predominantly from the Phlebotomus genus in the Old World and Lutzomyia in the New World. During development in the gut, Leishmania must survive various challenges, which include avoiding being expelled with blood remnants after digestion. It is believed that attachment to the gut epithelium is a necessary step for vector infection, and molecules from parasites and sand flies have been implicated in this attachment. In previous work, monoclonal antibodies were produced against Leishmania. Among these an antibody was obtained against Leishmania braziliensis flagella, which blocked the attachment of Leishmania panamensis flagella to Phlebotomus papatasi guts. The protein recognized by this antibody was identified and named FLAG1, and the complete FLAG1 gene sequence was obtained. This protein was later independently identified as a small, myristoylated protein and called SMP1, so from now on it will be denominated FLAG1/SMP1. The FLAG1/SMP1 gene is expressed in all developmental stages of the parasite, but has higher expression in promastigotes. The anti-FLAG1/SMP1 antibody recognized the flagellum of all Leishmania species tested and generated the expected band by western blots. This antibody was used in attachment and infection blocking experiments. Using the New World vector Lutzomyia longipalpis and Leishmania infantum chagasi, no inhibition of attachment ex vivo or infection in vivo was seen. On the other hand, when the Old World vectors P. papatasi and Leishmania major were used, a significant decrease of both attachment and infection were seen in the presence of the antibody. We propose that FLAG1/SMP1 is involved in the attachment/infection of Leishmania in the strict vector P. papatasi and not the permissive vector L. longipalpis.

  6. Flow and wall shear stress characterization following endovascular aneurysm repair and endovascular aneurysm sealing in an infrarenal aneurysm model

    NARCIS (Netherlands)

    Boersen, Johannes T.; Groot Jebbink, Erik; Versluis, Michel; Slump, Cornelis H.; Ku, David N.; de Vries, Jean-Paul P.M.; Reijnen, Michel M.P.J.

    2017-01-01

    Background Endovascular aneurysm repair (EVAR) with a modular endograft has become the preferred treatment for abdominal aortic aneurysms. A novel concept is endovascular aneurysm sealing (EVAS), consisting of dual endoframes surrounded by polymer-filled endobags. This dual-lumen configuration is

  7. Bi-liquid foams

    International Nuclear Information System (INIS)

    Sonneville, Odile

    1997-01-01

    Concentrated emulsions have structures similar to foams; for this reason they are also called 'bi-liquid foams'. For oil in water emulsions, they are made of polyhedral oil cells separated by aqueous surfactant films. The limited stability of these Systems is a major nuisance in their applications. In this work, we tried to understand and to control the mechanisms through which bi-liquid foams can loose their stability. In a first stage, we characterized the states of surfactant films in bi-liquid foams submitted to different pressures. We determined their hydration, the surfactant density at interfaces as well as their thicknesses. The bi-liquid foams were made by concentrating hexadecane-in-water emulsions through centrifugation. The initial emulsions contained submicron oil droplets that were completely covered with surfactant. We measured the resistance of the films to dehydration, and we represented it by pressure-film thickness curves or pressure-film hydration curves. We also obtained evidence that the interfacial surfactant density increases when the film thickness is decreased (SDS case). The Newton Black Film state is the most dehydrated metastable state that can be reached. In this state, the films can be described as surfactant bilayers that only contain the hydration water of the surfactant polar heads. Two different processes are involved the destabilization of bi-liquid foams: Ostwald ripening (oil transfer from small cells to large cells) and coalescence (films rupture). The first mechanism can be controlled by choosing oils that are very insoluble in water, avoiding ethoxylated nonionic surfactants of low molecular weight, and making emulsions that are not too fine. The second mechanism is responsible for the catastrophic destabilization of bi-liquid foams made of droplets above one micron or with a low coverage in surfactant. In these cases, destabilization occurs in the early stages of concentration, when the films are still thick. It is caused

  8. Endovascular Exclusion of Renal Artery Aneurysm

    International Nuclear Information System (INIS)

    Andersen, Poul Erik; Rohr, Nils

    2005-01-01

    A patient who was operated for an abdominal aortic aneurysm 7 years earlier presented with recently discovered iliac and renal artery aneurysms. The renal artery had an angulation of 90 o , but the aneurysm was successfully excluded using a covered vascular stent graft placed over an extrastiff guidewire. Even in cases of complex anatomy of a renal aneurysm, endovascular treatment should be considered. With development of more flexible and low-profile endoprosthesis with accurate deployment, these have become more usable

  9. Carotid artery aneurysm resulting in myxedema coma

    Directory of Open Access Journals (Sweden)

    Elizabeth M. Lamos

    2015-06-01

    Full Text Available Intra-sellar aneurysms are a rare, but important consideration when evaluating pituitary masses. Identification of aneurysms is critical to appropriate treatment and avoiding perilous consequences. These vascular aneurysms can result in severe endocrine dysfunction due to mass effect, stripping of the vascular supply to the pituitary, or hemorrhage. Here we describe a novel case of spontaneous myxedema coma and pituitary apoplexy secondary to a large internal carotid artery aneurysm.

  10. THIRD-GENERATION FOAM BLOWING AGENTS FOR FOAM INSULATION

    Science.gov (United States)

    The report gives results of a study of third-generation blowing agents for foam insulation. (NOTE: the search for third-generation foam blowing agents has led to the realization that, as the number of potential substitutes increases, new concerns, such as their potential to act a...

  11. Mass transfer measurements in foams

    International Nuclear Information System (INIS)

    Leblond, J.G.; Fournel, B.

    2004-01-01

    Full text of publication follows:This study participates to the elaboration of a method for decontamination of the inside surfaces of steel structures (pipes, tanks,...). The solution which has been chosen is to attack the surface of the structure by a dipping solution. In order to reduce the quantity of product to be recovered and treated at the end of the cleaning process, the active solution will be introduced as a foam. During its free or forced drainage the foam supplies an active liquid film along the structure surfaces. It was important to know if the transfers of the dipping liquid inside the foam and between foam and wall film are sufficient to allow a correct supplying of the active liquid at the wall and a correct dragging of the dipped products. The objective of this work is to develop a numerical model which simulates the various transfers. However such a modeling cannot be performed without a thorough knowledge of the different transfer parameters in the foam and in the film. The following study has been performed on a model foam (foaming water + air) held in a smooth vertical glass pipe and submitted to a forced drainage by the foaming water (water + surfactants). The liquid transfer involves the dispersion of the drainage liquid inside the foam and the transfer between the foam and the liquid film flowing down at the wall. The different transfers has been analyzed by NMR using a PFGSE-NMR sequence, which allows to determine the propagator, i.e., the probability density of the liquid particle displacements during a given time interval Δt, along a selected direction. This study allowed to measure, firstly, the mean liquid and the liquid dispersion in the foam along the vertical and horizontal direction, and secondly, the vertical mean velocity in the parietal liquid film. (authors)

  12. Transcatheter Coil Embolization of Splenic Artery Aneurysm

    International Nuclear Information System (INIS)

    Yamamoto, Satoshi; Hirota, Shozo; Maeda, Hiroaki; Achiwa, Sachiko; Arai, Keisuke; Kobayashi, Kaoru; Nakao, Norio

    2008-01-01

    The purpose of this study was to evaluate clinical results and technical problems of transcatheter coil embolization for splenic artery aneurysm. Subjects were 16 patients (8 men, 8 women; age range, 40-80 years) who underwent transcatheter embolization for splenic artery aneurysm (14 true aneurysms, 2 false aneurysms) at one of our hospitals during the period January 1997 through July 2005. Two aneurysms (12.5%) were diagnosed at the time of rupture. Multiple splenic aneurysms were found in seven patients. Aneurysms were classified by site as proximal (or strictly ostial) (n = 3), middle (n = 3), or hilar (n = 10). The indication for transcatheter arterial embolization was a false or true aneurysm 20 mm in diameter. Embolic materials were fibered coils and interlocking detachable coils. Embolization was performed by the isolation technique, the packing technique, or both. Technically, all aneurysms were devascularized without severe complications. Embolized aneurysms were 6-40 mm in diameter (mean, 25 mm). Overall, the primary technical success rate was 88% (14 of 16 patients). In the remaining 2 patients (12.5%), partial recanalization occurred, and re-embolization was performed. The secondary technical success rate was 100%. Seven (44%) of the 16 study patients suffered partial splenic infarction. Intrasplenic branching originating from the aneurysm was observed in five patients. We conclude that transcatheter coil embolization should be the initial treatment of choice for splenic artery aneurysm

  13. [Albert Einstein and his abdominal aortic aneurysm].

    Science.gov (United States)

    Cervantes Castro, Jorge

    2011-01-01

    The interesting case of Albert Einstein's abdominal aortic aneurysm is presented. He was operated on at age 69 and, finding that the large aneurysm could not be removed, the surgeon elected to wrap it with cellophane to prevent its growth. However, seven years later the aneurysm ruptured and caused the death of the famous scientist.

  14. FoamVis, A Visualization System for Foam Research: Design and Implementation

    OpenAIRE

    Lipsa, Dan; Roberts, Richard; Laramee, Robert

    2015-01-01

    Liquid foams are used in areas such as mineral separation, oil recovery, food and beverage production, sanitation and fire fighting. To improve the quality of products and the efficiency of processes in these areas, foam scientists wish to understand and control foam behaviour. To this end, foam scientists have used foam simulations to model foam behaviour; however, analysing these simulations presents difficult challenges. We describe the main foam research challenges and present the design ...

  15. Self-healing of sandwich structures with a grid stiffened shape memory polymer syntactic foam core

    Science.gov (United States)

    John, Manu; Li, Guoqiang

    2010-07-01

    In this paper, a new sandwich with an orthogrid stiffened shape memory polymer (SMP) based syntactic foam core was proposed, fabricated, programmed, impacted, healed (sealed), and compression tested, for the purposes of healing impact damage repeatedly and almost autonomously. Two prestrain levels (3% and 20%), two impact energy levels (30.0 and 53.3 J), and two recovery (healing) conditions (2D confined and 3D confined) were employed in this paper. Up to seven impact-healing cycles were conducted. Macroscopic and microscopic damage-healing observation and analysis were implemented. Residual strength was evaluated using an anti-buckling compression test fixture. It was found that the healing efficiency was over 100% for almost all the impact-healing cycles; programming using 20% prestrain led to higher residual strength than that with 3% prestrain; 3D confined recovery resulted in higher residual strength than 2D confined recovery; and as the impact energy increased, the healing efficiency slightly decreased.

  16. Foam rheology at large deformation

    Science.gov (United States)

    Géminard, J.-C.; Pastenes, J. C.; Melo, F.

    2018-04-01

    Large deformations are prone to cause irreversible changes in materials structure, generally leading to either material hardening or softening. Aqueous foam is a metastable disordered structure of densely packed gas bubbles. We report on the mechanical response of a foam layer subjected to quasistatic periodic shear at large amplitude. We observe that, upon increasing shear, the shear stress follows a universal curve that is nearly exponential and tends to an asymptotic stress value interpreted as the critical yield stress at which the foam structure is completely remodeled. Relevant trends of the foam mechanical response to cycling are mathematically reproduced through a simple law accounting for the amount of plastic deformation upon increasing stress. This view provides a natural interpretation to stress hardening in foams, demonstrating that plastic effects are present in this material even for minute deformation.

  17. PENGARUH MOTIVASI DAN KEPUASAN KERJA TERHADAP KINERJA GURU DI SMP NEGRI 5 MAGELANG

    Directory of Open Access Journals (Sweden)

    Lutviani Rahayu

    2014-11-01

    Full Text Available Tujuan penelitian ini adalah untuk mengetahui pengaruh motivasi dan kepuasan kerja terhadap kinerja guru di SMP Negeri 5 Magelang baik secara simultan maupun parsial. Populasi dalam penelitian ini adalah guru PNS di SMP Negeri 5 Magelang sebanyak 38 responden. Metode pengumpulan data yang digunakan adalah metode kuesioner dan dokumentasi. Teknik analisis data menggunakan analisis deskriptif. Hasil analisis menunjukkan bahwa persamaan garis regresi linier berganda yaitu Y = 0,182 + 0,283 + e; Y (kinerja guru, X1 (motivasi, X2 (kepuasan kerja. Hasil tersebut menunjukkan bahwa ada pengaruh antara motivasi dan kepuasan kerja terhadap kinerja guru di SMP Negeri 5 Magelang. OutputSPSS pengaruh X1 terhadap Y sebesar 0,643 dengan nilai hubungan parsial sebesar 12,1% pada taraf signifikansi 0,035, sedangkan X2 terhadap Y sebesar 0,178 dengan hubungan parsial sebesar 17,8% pada taraf signifikansi 0,011. Jadi semakin baik motivasi dan kepuasan kerja maka semakin baik pula kinerja guru. The purpose of this research is to find out whether there is an influence of motivation and job satisfaction on theteachers’ performance in SMP Negeri 5 Magelang either simultaneously or partially. The population in this research was a public civil servants in SMP Negeri 5 Magelang are 38 respondents. The collecting method was questionnaire and documentation. The analysis data technique were descriptive. The analysis showed that the multiple linear regression equation is Y = 0,182X1 + 0,283X2 + E, with Y (teachers’ performance, X1 (motivation, X2 (job satisfaction. These results indicated that there was an influence of motivation and job satisfaction on the teachers’s performance in SMP Negeri 5 Magelang. The SPSS output effect of X1 on Y of 0.643 with a value 12.1% partial relationship at a significance level of 0.035, while the X2 to Y of 0.178 with 17.8% partial relations at a significance level of 0.011. So the better motivation and job satisfaction, the better the

  18. Combined treatment for complex intracranial aneurysm

    Directory of Open Access Journals (Sweden)

    Chiriac A.

    2015-06-01

    Full Text Available Complex aneurysms often cannot be completely excluded by a single approaches. Today successful treatment of these lesions requires a combination between microsurgical and endovascular techniques. Planning of combined treatment require a very good understanding of aneurysm anatomy and a close collaboration between neurosurgeon and neuroendovascular interventionist. Endovascular coiling can usually be used as early treatment for a partially aneurysm occlusion including the ruptured area and followed by definitive clipping. On the other hand microsurgical clipping also can be used as first treatment for complex aneurysm neck reconstruction, allowing successful secondary placement of coils inside the remnant aneurysm sac

  19. Aneurysmal wall enhancement and perianeurysmal edema after endovascular treatment of unruptured cerebral aneurysms

    International Nuclear Information System (INIS)

    Su, I. Chang; Willinsky, Robert A.; Agid, Ronit; Fanning, Noel F.

    2014-01-01

    Perianeurysmal edema and aneurysm wall enhancement are previously described phenomenon after coil embolization attributed to inflammatory reaction. We aimed to demonstrate the prevalence and natural course of these phenomena in unruptured aneurysms after endovascular treatment and to identify factors that contributed to their development. We performed a retrospective analysis of consecutively treated unruptured aneurysms between January 2000 and December 2011. The presence and evolution of wall enhancement and perianeurysmal edema on MRI after endovascular treatment were analyzed. Variable factors were compared among aneurysms with and without edema. One hundred thirty-two unruptured aneurysms in 124 patients underwent endovascular treatment. Eighty-five (64.4 %) aneurysms had wall enhancement, and 9 (6.8 %) aneurysms had perianeurysmal brain edema. Wall enhancement tends to persist for years with two patterns identified. Larger aneurysms and brain-embedded aneurysms were significantly associated with wall enhancement. In all edema cases, the aneurysms were embedded within the brain and had wall enhancement. Progressive thickening of wall enhancement was significantly associated with edema. Edema can be symptomatic when in eloquent brain and stabilizes or resolves over the years. Our study demonstrates the prevalence and some appreciation of the natural history of aneurysmal wall enhancement and perianeurysmal brain edema following endovascular treatment of unruptured aneurysms. Aneurysmal wall enhancement is a common phenomenon while perianeurysmal edema is rare. These phenomena are likely related to the presence of inflammatory reaction near the aneurysmal wall. Both phenomena are usually asymptomatic and self-limited, and prophylactic treatment is not recommended. (orig.)

  20. Coil embolization of an enlarging fusiform myxomatous cerebral aneurysm

    Directory of Open Access Journals (Sweden)

    Frances Lazarow, MD

    2018-04-01

    Full Text Available Myxomatous cerebral aneurysms are rare sequelae of cardiac atrial myxoma. These aneurysms are generally fusiform, multiple, and distal. Pathogenesis and evolution of these aneurysms is still debated. There are currently no guidelines on the management of aneurysms secondary to atrial myxoma. We present a case of a 52-year-old man with multiple fusiform aneurysms 3 years after resection of a left atrial myxoma. One of these aneurysms was followed with cerebral angiography and showed substantial interval enlargement. This aneurysm was subsequently embolized. All aneurysms were stable 6 months post-embolization. Keywords: Myxomatous aneurysm, Fusiform, Coil embolization

  1. Renal aneurysm and arteriovenous fistula

    International Nuclear Information System (INIS)

    Savastano, S.; Feltrin, G.P.; Miotto, D.; Chiesura-Corona, M.; Padua Univ.

    1990-01-01

    Embolization was performed in six patients with renal artery aneurysms (n=2) and arteriovenous fistulas (AVF) (n=5). The aneurysms were observed in one patient with fibromuscular dysplasia and in another with Ehlers-Danlos syndrome. All the AVFs were intraparenchymal and secondary to iatrogenic trauma. Elective embolization was performed in five patients with good clinical results at follow-up between 1 and 9 years. Because of rupture of the aneurysm emergency embolization was attempted without success in the patient with Ehlers-Danlos syndrome, and nephrectomy was carried out. A postembolization syndrome complicated three procedures in which Gelfoam and polyvinyl alcohol were used; in two of these cases unexpected reflux of the particulate material occurred, resulting in limited undesired ablation of the ipsilateral renal parenchyma. Embolization is the most reliable and effective treatment for intrarenal vascular abnormalities since it minimizes the parenchymal damage. (orig.)

  2. Spontaneous non aneurysmal subarachnoid hemorrhage

    International Nuclear Information System (INIS)

    Bian Jieyong; Wang Zhong; Zhou Dai

    2000-01-01

    Objective: To study the etiology and the treatment of spontaneous non-aneurysmal subarachnoid hemorrhage. Methods: Twenty five cases of cerebral vessel angiography negative patients were analysed retrospectively, the majority of them had been undergone CT, DSA, MRI examination in order to define the etiological factor. Results: Among them, there was 1 case of spinal arteria-vena malformation, 1 case of hemorrhagic blood and 2 cases according to the revealing of MRI could be explained as bled vascular-occult malformation or cavernous angioma. Conclusion: The management and prognosis of patients in whom non-aneurysm is founded on the initial angiogram depends on the pattern of hemorrhage of the initial CT scanning, repeated angiography should be avoided for the case of premise encephalic non-aneurysmal SAH and MRI examination may be indicated to defining of etiological factors

  3. Ruptured gastroepiploic artery aneurysm: A case report

    Directory of Open Access Journals (Sweden)

    Ahmad S. Ashrafi

    Full Text Available Introduction: Gastroepiploic artery aneurysms are extremely rare, with few reported cases in the literature. The risk of rupture however, is high and thus warrants attention. Presentation of case: Here we present a rare case of a women who presented to the emergency department in shock and was found to have a ruptured gastroepiploic artery aneurysm during surgical exploration. Suture ligation of the aneurysm was completed. Discussion: Although rare, gastroepiploic artery aneurysms have up to a 90% rate of rupture and therefore require intervention. A laparoscopic approach has been described however, in cases where rupture has occurred, urgent laparotomy and control of hemorrhage is needed. Conclusion: We describe a rare case of a ruptured gastroepiploic aneurysm that was successfully managed with urgent laparotomy and aneurysmal resection. Keywords: Gastroepiploic, Aneurysm, Hemorrhage, Case report

  4. SMI Compatible Simulation Scheduler Design for Reuse of Model Complying with SMP Standard

    Directory of Open Access Journals (Sweden)

    Cheol-Hea Koo

    2010-12-01

    Full Text Available Software reusability is one of key factors which impacts cost and schedule on a software development project. It is very crucial also in satellite simulator development since there are many commercial simulator models related to satellite and dynamics. If these models can be used in another simulator platform, great deal of confidence and cost/schedule reduction would be achieved. Simulation model portability (SMP is maintained by European Space Agency and many models compatible with SMP/simulation model interface (SMI are available. Korea Aerospace Research Institute (KARI is developing hardware abstraction layer (HAL supported satellite simulator to verify on-board software of satellite. From above reasons, KARI wants to port these SMI compatible models to the HAL supported satellite simulator. To port these SMI compatible models to the HAL supported satellite simulator, simulation scheduler is preliminary designed according to the SMI standard.

  5. A D'-type symbiotic binary in the planetary nebula SMP LMC 88

    Science.gov (United States)

    Iłkiewicz, Krystian; Mikołajewska, Joanna; Miszalski, Brent; Kozłowski, Szymon; Udalski, Andrzej

    2018-05-01

    SMP LMC 88 is one of the planetary nebulae (PNe) in the Large Magellanic Cloud. We identify in its spectrum Raman scattered O VI lines at 6825 and 7083 Å. This unambiguously classifies the central object of the nebula as a symbiotic star (SySt). We identified the cold component to be a K-type giant, making this the first D'-type (yellow) SySt discovered outside the Galaxy. The photometric variability in SMP LMC 88 resembles the orbital variability of Galactic D'-type SySt with its low amplitude and sinusoidal light-curve shape. The SySt classification is also supported by the He I diagnostic diagram.

  6. Mechanical Characterization of Rigid Polyurethane Foams

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Wei-Yang [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Mechanics of Materials

    2014-12-01

    Foam materials are used to protect sensitive components from impact loading. In order to predict and simulate the foam performance under various loading conditions, a validated foam model is needed and the mechanical properties of foams need to be characterized. Uniaxial compression and tension tests were conducted for different densities of foams under various temperatures and loading rates. Crush stress, tensile strength, and elastic modulus were obtained. A newly developed confined compression experiment provided data for investigating the foam flow direction. A biaxial tension experiment was also developed to explore the damage surface of a rigid polyurethane foam.

  7. PENGARUH PENGGUNAAN SMARTPHONE TEHADAP POLA KOMUNIKASI INTERPESONAL SISWA SMP NEGERI 50 BANDUNG

    Directory of Open Access Journals (Sweden)

    Pitthauly Haomasan

    2018-03-01

    Full Text Available ABSTRACTNowadays smartphones can be consumed from young to old age. Motives teenagers in using thesmartphone quite diverse, namely, the sophistication of features, fast internet access, ease of accessto social media, entertainment facilities and help in doing homework. In early January 2017, SMPNegeri 50 Bandung set a ban on bringing smartphones to school, due to the recent years the influenceof smartphone making problems in school. This study was conducted to find out how much the influenceof using smartphones to interpersonal communication patterns of students of SMP Negeri 50 Bandung.This research is associated with Uses and Gratification theory and the method is quantitative with thetype of descriptive research. This study involved one independent variable and one dependent variable.Using probability sampling method with Slovin approach with the number of respondents 82 people.Data analysis techniques used are descriptive and multiple linear regression analysis. Based on theresults of simultaneous hypothesis testing, a significant influence on the use of smartphones againstinterpesonal communication patterns. This is evidenced by the value of F-count(41.644> F-table(2.722 with a significance level of 5%. The result of coefficient of determination showed that Frequencyof Use, the Variety of Content and Activity give influence of 61,6% to Interpersonal CommunicationPattern of students of SMP Negeri 50 Bandung. While the action of 38.4% is the contribution of othervariables that are not examined in this study. Can be concluded that SMP Negeri 50 Bandung prohibitsbringing smartphones to school so obtained despite the prohibition of bringing the smartphone in effectto make high interpersonal communication patterns of students of SMP Negeri 50 Bandung.Keywords: smartphone usage, interpersonal communication, pattern of interpersonal communication,uses and gratification.

  8. Hubungan Kecemasan Sosial dan Kematangan Emosi dengan Kematangan Seksual Remaja SMP di Kabupaten Bantul Yogyakarta

    OpenAIRE

    Endang Sri Lestari

    2012-01-01

    This research aims to find out some factors related to the sexual maturity, such as the social anxiety and emotional maturity on the adolescents of the SMP in Kabupaten Bantul, Yogyakarta. The hypotheses which are presented in this research are: First; there is a relation between the social anxiety and emotional maturity towards the sexual maturity; Second, there is a negative relation between the social anxiety and sexual maturity; Third, there is a positive relation between the emotional ma...

  9. Kemampuan Representasi Matematis Siswa pada Materi Segi Empat di Kelas VIII SMP Kemala Bhayangkari

    OpenAIRE

    Nelli,; Yusmin, Edy; Sayu, Silvia

    2015-01-01

    The purpose of this research is to reveal the students ability of representation enactive, iconic, and symbolic on the quadrilateral matter in the class 8 SMP Kemala Bhayangkari. The method that is used is descriptive research in survey research mode. Based on the result of research, student's enactive representation aspects identified that student is able to put a square on the frame and students at the intermediate and lower ability is not able to fold a square of paper according the line, ...

  10. Kemampuan Representasi Matematis Menurut Tingkat Kemampuan Siswa pada Materi Segi Empat di SMP

    OpenAIRE

    Aryanti, Devi; -, Zubaidah; Nursangaji, Asep

    2013-01-01

    The purpose of this research is to know the ability and tendency of mathematical representation in solve the word problem about quadrilateral matter at SMP 03 Semparuk. The method of this research is descriptive research survey. The subject of this research is the VIIIC class at SMPN 03 Semparuk. The result analysis data show that the high level student have high enactive representation capability, low iconic representation and very high symbolic representations ability. The intermediate leve...

  11. Analisis Tingkat Kebisingan Di Area SMP Neg.6 Makassar Berbasis Persepsi

    OpenAIRE

    Sultan, Yoventus

    2016-01-01

    Penelitian ini dilaksanakan di SMPN 6 Makassar yang berada di jalan Jend. Ahmad Yani. Penelitian ini bertujuan menganalisis persepsi civitas dan warga di SMP 6 terhadap upaya pengendaloan kebisingan. Selain itu, penelitian ini juga bertujuan untuk menganalisis hubungan antara pekerjaan dan persepsi tingkat kebisingan di SMPN 6 Makassar. Peneliti mengumpulkan data dengan cara penyebaran kuisioner sebagai metode yang digunakan dalam penelitian ini kepada civitas sekolah dan warga sekitar sekol...

  12. PENGEMBANGAN SOAL MATEMATIKA MODEL TIMSS UNTUK MENDUKUNG PEMBELAJARAN MATEMATIKA SMP KELAS VII KURIKULUM 2013

    OpenAIRE

    M. Andy Rudhito; D. Arif Budi Prasety

    2016-01-01

    Abstrak: Penelitian ini bertujuan untuk menghasilkan soal matematika model TIMSS yang valid dan praktis untuk siswa SMP berdasarkan Kurikulum 2013. Metode penelitian yang digunakan adalah penelitian pengembangan. Proses pendesainan soal sebagai instrumen penilaian dilakukan dengan prototyping. Prototyping meliputi dua tahap. Prototipe I merupakan hasil desain dan penyusunan soal-soal oleh peneliti sendiri, sedang prototipe II revisi dari prototipe I berdasarkan masukan dari pakar, teman sejaw...

  13. An Analysis on Students' Speaking Skill at Second Grade SMP 8 Rambah Hilir

    OpenAIRE

    Harahap, Siti Surinah; Antoni, Rivi; Rasyidah, Ummi

    2015-01-01

    The purpose of this research was to find out students speaking skill. Speaking is one of the some skills among listening, writing, reading.This research used descriptive qualitative research design.where the writer described and analyzed the students' errors in speaking skill. The population of this research was taken from the second grade students' at Smp 8 Rambah Hilir in Rambah Hilir district is about 21 students.Based on the result, the writer concludes that the second grade students' of ...

  14. Hubungan Kecerdasan Emosional dan Kemampuan Menyelesaikan Masalah Matematika Siswa di SMP Bumi Khatulistiwa

    OpenAIRE

    Rospitasari, Murni

    2017-01-01

    This reseach aimed to know the correlation among emotional intelligence and the ability of mathematics problem solving of the ninth grade students of SMP Bumi Khatulistiwa Sungai Raya. The method that used un this reseach was a quatitative descriptive with Ex Post Facto form. The subject of this research were the ninth grade students class B that consist of 13 student. Data collection techniques in this research was a measurement technique in the form of essay and the scale of emotional inte...

  15. PENGEMBANGAN MODEL LATIHAN KRIBO UNTUK POWER TUNGKAI ATLET LOMPAT JAUH DAN SPRINTER SKO SMP

    Directory of Open Access Journals (Sweden)

    Afristian Ismadraga

    2015-04-01

    DEVELOPING “KRIBO” MODEL FOR ATLETHIC POWER LEG TRAINING OF LONG JUMP AND SPRINTER FOR JUNIOR HIGH SCHOOL SPORT CLASS Abstract This reseach aims to produce “KRIBO” ( kreatif dan inovatif dengan bola training model to train atletic of long jump and sprinter for junior high school sport class. The development of this model is expected to become a satisfactory and effective training model. This research and development was conducted by adapting the research as follows: (1 Research and information collection. (2 Planning (3 Develop preliminary form of product (4 Preliminary field testing (5 Main product revision (6 Main filed testing (7 Operasional product revision (8 Operational field testing  (9 Final product revision (10 Dissemination and implementation. The small-scale field trial was done by 10 students of grade IX class in SMP N 1 Ngawen. The large-scale field trials were done by 20 students of grade IX in SMP N 1 Ngawen and SMP N 1 Playen. The data collecting instruments were: (1 interview guide, (2 a value scale, (3 observation guide of the model, (4 an observasion guide of the model’s efectiveness, (5 a guestionnaire for the students. The data analysis method was a guantitative descriptive analysis and qualitative descriptive analysis. Based on the data analysis derived from coach and expert assessment, it is concluded that the model is training as very satisfactory and effective. Keywords: exercise models,”KRIBO”, long jump, sprinter

  16. Super-mini percutaneous nephrolithotomy (SMP): a new concept in technique and instrumentation.

    Science.gov (United States)

    Zeng, Guohua; Wan, ShawPong; Zhao, Zhijian; Zhu, Jianguo; Tuerxun, Aierken; Song, Chao; Zhong, Liang; Liu, Ming; Xu, Kewei; Li, Hulin; Jiang, Zhiqiang; Khadgi, Sanjay; Pal, Shashi K; Liu, Jianjun; Zhang, Guoxi; Liu, Yongda; Wu, Wenqi; Chen, Wenzhong; Sarica, Kemal

    2016-04-01

    To present a novel miniature endoscopic system designed to improve the safety and efficacy of percutaneous nephrolithotomy, named the 'super-mini percutaneous nephrolithotomy' (SMP). The endoscopic system consists of a 7-F nephroscope with enhanced irrigation and a modified 10-14 F access sheath with a suction-evacuation function. This system was tested in patients with renal stones of operative duration was 45.6 min. The initial stone-free rate (SFR) was 90.1%. The SFR at the 3-month follow-up was 95.8%. Three patients required auxiliary procedures for residual stones. Complications occurred in 12.8% of the patients, all of which were Clavien grade ≤II and no transfusions were needed. In all, 72.3% of the patients did not require any kind of catheter, while 19.8% had JJ stents and 5.7% had nephrostomy tubes placed. The mean hospital stay was 2.1 days. SMP is a safe and effective treatment for renal stones of <2.5 cm. SMP may be particularly suitable for patients with lower pole stones and stones that ae not amenable to retrograde intrarenal surgery. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

  17. The Implementation of Scaffolding in Writing Recount Texts in SMP Joannes Bosco Yogyakarta

    Directory of Open Access Journals (Sweden)

    Tiara Maria Dewi

    2017-01-01

    Full Text Available In this research, scaffolding is implemented in English class of the 8th grade students of SMP Joannes Bosco Yogyakarta when they learn about recount text. This research aims to find out the process of how scaffolding is implemented and to know what the benefits of scaffolding in writing recount text. There were two research problems. The first was “How is scaffolding for the 8th grade students of SMP Joannes Bosco in writing a recount text?” and the second was “What are the benefits of scaffolding in writing a recount text in SMP Joannes Bosco Yogyakarta?” The writers conducted a descriptive qualitative research in this study. The data was gathered by interviewing the English teacher, writing on the field notes, distributing the questionnaires, and interviewing the students. Analyzing the students’ writings was used as the supplementary data to make the result stronger. The result of this study showed that the implementation of scaffolding gave benefits for the students. The benefits were challenging the students through deep learning and discovery, engaging the students in meaningful and dynamic discussions in the small and the large classes, and motivating the learners to become better students. In conclusion, scaffolding does give benefits for the students so that teachers are able to use scaffolding as one of the effective teaching techniques.   DOI: https://doi.org/10.24071/llt.2016.190104

  18. PENGEMBANGAN BAHAN AJAR DENGAN MODEL MIND MAP UNTUK PEMBELAJARAN ILMU PENGETAHUAN SOSIAL SMP

    Directory of Open Access Journals (Sweden)

    Lukman Lukman

    2014-12-01

    Full Text Available Penelitian ini bertujuan untuk menghasilkan bahan ajar dengan model mind map yang layak digunakan pada pembelajaran Ilmu Pengetahuan Sosial (IPS untuk siswa SMP, serta mengetahui keefektifan bahan ajar hasil pengembangan. Penelitian ini merupakan penelitian dan pengembangan (Research and Development. Hasil penelitian adalah sebagi berikut: (1 menghasilkan bahan ajar dengan model mind map untuk pembelajaran Ilmu Pengetahuan Sosial siswa SMP yang dikemas dalam bentuk buku dengan materi “Perkembangan pada Masa Islam di Indonesia”. Produk yang dihasilkan layak digunakan untuk pembelajaran berdasarkan validasi dari ahli materi, ahli media, uji coba terbatas, serta uji coba lapangan. (2 Bahan ajar hasil pengembangan untuk siswa kelas VII di SMP N 3 Berbah ini efektif digunakan untuk pembelajaran IPS. Peningkatan skor postes pada kelas yang menggunakan bahan ajar dengan model mind map sebesar 13,87% dengan nilai gain score 0,45 dan ketuntasan siswa 100%. Sedangkan kelas yang menggunakan buku paket IPS dengan peningkatan skor postes sebesar 10,26% dengan nilai gain score 0,35 dan ketuntasan siswa 87,1%. Kata kunci: bahan ajar, mind map, ilmu pengetahuan sosial

  19. Translational research into species differences of endocrine toxicity via steroidogenesis inhibition by SMP-028 — For human safety in clinical study

    International Nuclear Information System (INIS)

    Nishizato, Yohei; Imai, Satoki; Okahashi, Noriko; Yabunaka, Atsushi; Kunimatsu, Takeshi; Kikuchi, Kaoru; Yabuki, Masashi

    2014-01-01

    SMP-028 is a drug candidate developed for the treatment of asthma. In a 13-week repeated dose toxicity study of SMP-028 in rats and monkeys, differences of endocrine toxicological events between rats and monkeys were observed. In rats, these toxicological events mainly consisted of pathological changes in the adrenal, testis, ovary, and the other endocrine-related organs. On the other hand, in monkeys, no toxicological events were observed. The goal of this study is to try to understand the reason why only rats, but not monkeys, showed toxicological events following treatment with SMP-028 and to eventually predict the possible toxicological effect of this compound on human endocrine organs. Our results show that SMP-028 inhibits neutral cholesterol esterase more strongly than other steroidogenic enzymes in rats. Although SMP-028 also inhibits monkeys and human neutral cholesterol esterase, this inhibition is much weaker than that of rat neutral cholesterol esterase. These results indicate (1) that the difference in endocrine toxicological events between rats and monkeys is mainly due to inhibition of steroidogenesis by SMP-028 in rats, not in monkeys, and (2) that SMP-028 may not affect steroidogenesis in humans and therefore might cause no endocrine toxicological events in clinical studies. - Highlights: • SMP-028 inhibits neutral CEase more strongly than other steroidogenic enzymes in rats. • Inhibition of neutral CEase in rats by SMP-028 suppresses steroidogenesis in vivo. • SMP-028 does not inhibit neutral CEase in monkeys in vivo. • Steroidogenesis pathway in monkeys treated with SMP-028 was not suppressed. • SMP-028 may not inhibit LIPE in humans in vivo

  20. Translational research into species differences of endocrine toxicity via steroidogenesis inhibition by SMP-028 — For human safety in clinical study

    Energy Technology Data Exchange (ETDEWEB)

    Nishizato, Yohei, E-mail: yohei-nishizato@ds-pharma.co.jp [Preclinical Research Laboratories, Dainippon Sumitomo Pharma Co., Ltd., 33-94, Enoki-cho, Suita, Osaka 564-0053 (Japan); Imai, Satoki [Preclinical Research Laboratories, Dainippon Sumitomo Pharma Co., Ltd., 33-94, Enoki-cho, Suita, Osaka 564-0053 (Japan); Okahashi, Noriko [Research Planning and Intelligence, Dainippon Sumitomo Pharma Co., Ltd., 33-94, Enoki-cho, Suita, Osaka 564-0053 (Japan); Yabunaka, Atsushi; Kunimatsu, Takeshi [Preclinical Research Laboratories, Dainippon Sumitomo Pharma Co., Ltd., 33-94, Enoki-cho, Suita, Osaka 564-0053 (Japan); Kikuchi, Kaoru [Innovative Drug Discovery Laboratories, Dainippon Sumitomo Pharma Co., Ltd., 33-94, Enoki-cho, Suita, Osaka 564-0053 (Japan); Yabuki, Masashi [Preclinical Research Laboratories, Dainippon Sumitomo Pharma Co., Ltd., 33-94, Enoki-cho, Suita, Osaka 564-0053 (Japan)

    2014-05-01

    SMP-028 is a drug candidate developed for the treatment of asthma. In a 13-week repeated dose toxicity study of SMP-028 in rats and monkeys, differences of endocrine toxicological events between rats and monkeys were observed. In rats, these toxicological events mainly consisted of pathological changes in the adrenal, testis, ovary, and the other endocrine-related organs. On the other hand, in monkeys, no toxicological events were observed. The goal of this study is to try to understand the reason why only rats, but not monkeys, showed toxicological events following treatment with SMP-028 and to eventually predict the possible toxicological effect of this compound on human endocrine organs. Our results show that SMP-028 inhibits neutral cholesterol esterase more strongly than other steroidogenic enzymes in rats. Although SMP-028 also inhibits monkeys and human neutral cholesterol esterase, this inhibition is much weaker than that of rat neutral cholesterol esterase. These results indicate (1) that the difference in endocrine toxicological events between rats and monkeys is mainly due to inhibition of steroidogenesis by SMP-028 in rats, not in monkeys, and (2) that SMP-028 may not affect steroidogenesis in humans and therefore might cause no endocrine toxicological events in clinical studies. - Highlights: • SMP-028 inhibits neutral CEase more strongly than other steroidogenic enzymes in rats. • Inhibition of neutral CEase in rats by SMP-028 suppresses steroidogenesis in vivo. • SMP-028 does not inhibit neutral CEase in monkeys in vivo. • Steroidogenesis pathway in monkeys treated with SMP-028 was not suppressed. • SMP-028 may not inhibit LIPE in humans in vivo.

  1. PERBEDAAN SELF-REGULATED LEARNING DITINJAU DARI POLA ASUH ORANGTUA PADA SISWA KELAS VIII SMP FRANSISKUS DAN SMP PGRI 01 SEMARANG

    Directory of Open Access Journals (Sweden)

    Lintang Januardini

    2015-07-01

    Full Text Available Relationship between parents and adolescents influence achievement at school. The research was conducted to determine differences of self-regulated learning (SRL in terms of parenting style. The population is 8th grade students of junior high school in SMP Fransiskus and SMP PGRI 01 Semarang. The hypothesis is there are differences of SRL in terms of parenting style. Parenting is overall characteristic of parent’s behavior on adolescents, including a response in the form of parental warmth, sensitivity and criticism, discipline, and involvement (control. Self-regulated learning is the ability of students to use metacognition, motivation and behavior to achieve learning goals. Method of data collection used two scales namely Parenting Scale and Self Regulated Learning scale. Parenting Scale consists of 42 aitem (α = 0.931 and the SRL scale consists of 37 aitem (α = 0.906. This study involved 208 students. Sampling technique carried out by cluster random sampling. Data analysis was performed by one way analysis of variance (one way-Anova. Based on the data analysis, obtained F count = 3152 with p = 0.029 (p<0.05. This result indicates that there are significant differences in SRL on students with the type of parenting authoritative, authoritarian, permissive, and neglect, so the hypothesis was accepted. Keywords: Parenting style, SRL, 8th grade students

  2. PUR-PIR foam produced based on poly(hydroxybutyl citrate foamed founded with different factories

    Directory of Open Access Journals (Sweden)

    Liszkowska Joanna

    2018-03-01

    Full Text Available A poly(hydroxybutyl citrate p(HBC was obtained. The product compound produced in the solution during esterification, was added to rigid polyurethane-polyisocyanurate foams (PUR-PIR. The amount of petrochemical polyol in the foams was decreased in favor of the p(HBC from 0.1 to 0.5 equivalent. The foams were foamed in two ways: with distilled water (W foams and with Solkane 365/227 (S foams. The examination results of both foam series were compared. They showed that the foams foamed with water have higher softening temperature than the foams foamed with solkane. The retention values for both foam series are around 91–95%, and water absorption in the range of 0.7–3.2%. The anisotropy coefficient did not exceed 1.08 (the lowest value being 1.01.

  3. Composite carbon foam electrode

    Science.gov (United States)

    Mayer, Steven T.; Pekala, Richard W.; Kaschmitter, James L.

    1997-01-01

    Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivty and power to system energy.

  4. Circumstances surrounding aneurysmal subarachnoid hemorrhage

    NARCIS (Netherlands)

    Schievink, W. I.; Karemaker, J. M.; Hageman, L. M.; van der Werf, D. J.

    1989-01-01

    The circumstances surrounding aneurysmal subarachnoid hemorrhage were investigated in a group of 500 consecutive patients admitted to a neurosurgical center. Subarachnoid hemorrhage occurred during stressful events in 42.8% of the patients, during nonstrenuous activities in 34.4%, and during rest or

  5. Vascular Variations Associated with Intracranial Aneurysms.

    Science.gov (United States)

    Orakdogen, Metin; Emon, Selin Tural; Somay, Hakan; Engin, Taner; Is, Merih; Hakan, Tayfun

    2017-01-01

    To investigate the vascular variations in patients with intracranial aneurysm in circle of Willis. We used the data on 128 consecutive intracranial aneurysm cases. Cerebral angiography images were analyzed retrospectively. Arteries were grouped as anterior cerebral arterial system (ACS), posterior cerebral arterial system (PCS) and middle cerebral arterial system (MCS) for grouping vascular variations. Lateralization, being single/multiple, gender; and also any connection with accompanying aneurysms" number, localization, dimension, whether bleeding/incidental aneurysm has been inspected. Variations were demonstrated in 57.8% of the cases. The most common variation was A1 variation (34.4%). The rate of variations was 36.7%, 24.2% and 10.2% respectively in ACS, PCS and MCS. MCS variations were significantly higher in males. Anterior communicating artery (ACoA) aneurysm observance rates were significantly higher and posterior communicating artery (PCoA) aneurysm and middle cerebral artery (MCA) aneurysm observance rates were significantly lower when compared to "no ACS variation detected" cases. In "PCS variation detected" cases, PCoA aneurysm observance rates and coexistence of multiple variations were significantly higher. The rate of vascular variations in patients with aneurysms was 57.8%. Arterial hypoplasia and aplasia were the most common variations. ACS was the most common region that variations were located in; they were mostly detected on the right side. Coexistence of ACoA aneurysm was higher than PCoA and MCA aneurysms. In the PCS variations group, PCoA aneurysms were the most common aneurysms that accompanying the variation and multiple variations were more common than in the other two groups. The variations in MCS were most common in males.

  6. The influence of neck thrombus on clinical outcome and aneurysm morphology after endovascular aneurysm repair

    NARCIS (Netherlands)

    F.M.V. Bastos Gonçalves (Frederico); H.J.M. Verhagen (Hence); K. Chinsakchai (Khamin); J.W. van Keulen (Jasper); M.T. Voûte (Michiel); H.J.A. Zandvoort (Herman); F.L. Moll (Frans); J.A. van Herwaarden (Joost)

    2012-01-01

    textabstractObjective: This study investigated the influence of significant aneurysm neck thrombus in clinical and morphologic outcomes after endovascular aneurysm repair (EVAR). Methods: The patient population was derived from a prospective EVAR database from two university institutions in The

  7. EFFORTS TO IMPROVE LEARNING MOTIVATION OF STUDENT WITH CONTENT MASTERY IN SMP NEGERI 1 METRO

    Directory of Open Access Journals (Sweden)

    Hadi Pranoto

    2013-09-01

    Full Text Available Abstract: The study design using action research applied in guidance and counseling services (follow-services research. Subjects in this study, researchers took VII.4 grade students of SMP Negeri 1 Metro Odd Semester Lesson Tabun 2012/2013. Of the 24 students, there are 10 students who experience a lack of motivation to learn to 41.66%. The method used in collecting data by observation and field notes. Analysis of the data used is the analysis of qualitative and quantitative data. Validity test is done through assessment experts /specialists ie counseling teachers SMP Negeri 1 Metro, other friends peer discussions that instrument with other friends FKIP students with courses in counseling. The results of this study, it can be concluded that the results obtained through the implementation of the procurement of content services in increasing the motivation of learners class VII.4 SMP Negeri 1 Metro Tabun Odd Semester Lesson 20 12/20 13 is visible from the change in behavior and ability of learners in learners become more willing to meet the needs of achievement, students can understand or have confidence in learning, learners have the ability to overcome failure in learning, and learners have a good competitiveness in the service learning. Through mastery of content supplied by BK teacher can increase the motivation of learners class VII.4 SMP Negeri 1 Metro Odd Semester Academic Year 201212013. There is increased the motivation of learners in the first cycle seen from the average percentage that is equal to 27.5% and in the second cycle of 75 %, resulting in an increase of 47.5%. Response and activity VIl.4 grade students of SMP Negeri 1 Metro Odd Semester Lesson Tabun 2012/2013 on the service in the content mastery enhance learning motivation is very positive, it is shown by the participation of learners in the service following the mastery of content, learner motivation and enthusiasm in participating services as well as content mastery

  8. Amorphous microcellular polytetrafluoroethylene foam film

    Science.gov (United States)

    Tang, Chongzheng

    1991-11-01

    We report herein the preparation of novel low-density ultramicrocellular fluorocarbon foams and their application. These fluorocarbon foams are of interest for the biochemistry arena in numerous applications including foodstuff, pharmacy, wine making, beer brewery, fermentation medical laboratory, and other processing factories. All of those require good quality processing programs in which, after eliminating bacterium and virus, compressed air is needed. Ordinarily, compressed air contains bacterium and virus, its size is 0.01 - 2 micrometers fluorocarbon foam films. Having average porous diameter 0.04 - 0.1 micrometers , these are stable to high temperature (280 degree(s)C) and chemical environments, and generally have good engineering and mechanical properties (e.g., low coefficient of thermal expansion, high modulus, and good dimensional stability). Our new process for preparing low density fluorocarbon foams provides materials with unique properties. As such, they offer the possibility for being superior to earlier materials for a number of the filter applications mentioned.

  9. Microcellular foams via phase separation

    International Nuclear Information System (INIS)

    Young, A.T.

    1985-01-01

    A study of wide variety of processes for making plastic foams shows that phase separation processes for polymers from solutions offers the most viable methods for obtaining rigid plastic foams which met the physical requirements for fusion target designs. Four general phase separation methods have been shown to give polymer foams with densities less than 0.1 g/cm 3 and cell sizes of 30μm or less. These methods involve the utilization of non-solvent, chemical or thermal cooling processes to achieve a controlled phase separation wherein either two distinct phases are obtained where the polymer phase is a continuous phase or two bicontinuous phases are obtained where both the polymer and solvent are interpenetrating, continuous, labyrinthine phases. Subsequent removal of the solvent gives the final foam structure

  10. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after...... (6 on fluoride mouth rinse, 10 on fluoride gel and 3 on fluoride foam); 6 had a low risk of bias while 2 had a moderate risk. All fluoride measures appeared to be beneficial in preventing crown caries and reversing root caries, but the quality of evidence was graded as low for fluoride mouth rinse......, moderate for fluoride gel and very low for acidulated fluoride foam. No conclusions could be drawn on the cost-effectiveness. CONCLUSIONS: This review, covering the recent decade, has further substantiated the evidence for a caries-preventive effect of fluoride mouth rinse, fluoride gel and foam...

  11. Foaming in manure based digesters

    DEFF Research Database (Denmark)

    Kougias, Panagiotis; Boe, Kanokwan; Angelidaki, Irini

    2012-01-01

    Anaerobic digestion foaming is one of the major problems that occasionally occurred in the Danish full-scale biogas plants, affecting negatively the overall digestion process. The foam is typically formatted in the main biogas reactor or in the pre-storage tank and the entrapped solids in the foam...... cause severe operational problems, such as blockage of mixing devices, and collapse of pumps. Furthermore, the foaming problem is linked with economic consequences for biogas plants, due to income losses derived from the reduced biogas production, extra labour work and additional maintenance costs...... was increased by the addition of glucose in the feeding substrate. During the 2nd and 4th period the organic loading rate was maintained constant, but instead of glucose, higher concentration of Na-oleate or gelatine was added in the feeding substrate. The results obtained from the above experiment showed...

  12. Photoactivity of Titanium Dioxide Foams

    Directory of Open Access Journals (Sweden)

    Maryam Jami

    2018-01-01

    Full Text Available TiO2 foams have been prepared by a simple mechanical stirring method. Short-chain amphiphilic molecules have been used to stabilize colloidal suspensions of TiO2 nanoparticles. TiO2 foams were characterized by X-ray diffraction (XRD, X-ray photoelectron spectroscopy (XPS, UV-vis absorption spectroscopy, and scanning electron microscopy (SEM. The photoassisted oxidation of NO in the gas phase according to ISO 22197-1 has been used to compare the photoactivity of the newly prepared TiO2 foams to that of the original powders. The results showed that the photoactivity is increased up to about 135%. Foam structures seem to be a good means of improving the photoactivity of semiconductor materials and can readily be used for applications such as air purification devices.

  13. Supercapacitors based on carbon foams

    Science.gov (United States)

    Kaschmitter, James L.; Mayer, Steven T.; Pekala, Richard W.

    1993-01-01

    A high energy density capacitor incorporating a variety of carbon foam electrodes is described. The foams, derived from the pyrolysis of resorcinol-formaldehyde and related polymers, are high density (0.1 g/cc-1.0 g/cc) electrically conductive and have high surface areas (400 m.sup.2 /g-1000 m.sup.2 /g). Capacitances on the order of several tens of farad per gram of electrode are achieved.

  14. A cement based syntactic foam

    International Nuclear Information System (INIS)

    Li Guoqiang; Muthyala, Venkata D.

    2008-01-01

    In this study, a cement based syntactic foam core was proposed and experimentally investigated for composite sandwich structures. This was a multi-phase composite material with microballoon dispersed in a rubber latex toughened cement paste matrix. A trace amount of microfiber was also incorporated to increase the number of mechanisms for energy absorption and a small amount of nanoclay was added to improve the crystal structure of the hydrates. Three groups of cement based syntactic foams with varying cement content were investigated. A fourth group of specimens containing pure cement paste were also prepared as control. Each group contained 24 beam specimens. The total number of beam specimens was 96. The dimension of each beam was 30.5 cm x 5.1 cm x 1.5 cm. Twelve foam specimens from each group were wrapped with plain woven 7715 style glass fabric reinforced epoxy to prepare sandwich beams. Twelve cubic foam specimens, three from each group, with a side length of 5.1 cm, were also prepared. Three types of testing, low velocity impact test and four-point bending test on the beam specimens and compression test on the cubic specimens, were conducted to evaluate the impact energy dissipation, stress-strain behavior, and residual strength. Scanning electron microscope (SEM) was also used to examine the energy dissipation mechanisms in the micro-length scale. It was found that the cement based syntactic foam has a higher capacity for dissipating impact energy with an insignificant reduction in strength as compared to the control cement paste core. When compared to a polymer based foam core having similar compositions, it was found that the cement based foam has a comparable energy dissipation capacity. The developed cement based syntactic foam would be a viable alternative for core materials in impact-tolerant composite sandwich structures

  15. Foam shell project: Progress report

    International Nuclear Information System (INIS)

    Overturf, G.; Reibold, B.; Cook, B.; Schroen-Carey, D.

    1994-01-01

    The authors report on their work to produce a foam shell target for two possible applications: (1) as liquid-layered cryogenic target on Omega Upgrade, and (2) as a back-up design for the NIF. This target consists of a roughly 1 mm diameter and 100 μm thick spherical low-density foam shell surrounding a central void. The foam will be slightly overfilled with liquid D 2 or DT, the overfilled excess being symmetrically distributed on the inside of the shell and supported by thermal gradient techniques. The outside of the foam is overcoated with full density polymer which must be topologically smooth. The technology for manufacturing this style of foam shell involves microencapsulation techniques and has been developed by the Japanese at ILE. Their goal is to determine whether this technology can be successfully adapted to meet US ICF objectives. To this end a program of foam shell development has been initiated at LLNL in collaboration with both the General Atomics DOE Target Fabrication Contract Corporation and the Target Fabrication Group at LLE

  16. The intracranial aneurysm: cost-effective of the aneurysm intra-artery GDC embolization and the aneurysm incarcerated operation

    International Nuclear Information System (INIS)

    Pan Jie; Zhang Shizheng

    2008-01-01

    Objective: To evaluate the cost-effectiveness of the aneurysm intra-artery GDC embolization and the aneurysm clapping of intracranial aneurysm, and to give the instruction for the clinical practice. Methods: A case control study (1 vs. 1) was developed to evaluate the cost in hospital, the cost for return visit and the Quality-adusted Life-Year (QALY) and lifetime costs of the intra-artery GDC embolization and the aneurysm clapping of intraeranial aneurysm, under the matching of the age, sex, living place, the size and place of the aneurysm, and the Hunt and Hess score. Clinically effectiveness dates were derived from the medical records. Cost dates were derived from follow-up by telephones or letters. The correlation analysis was done with the SPSS 13.0. Results: The cost in hospital in AC group was (54 945±16 946)RMBs, which was higher than the ones in AE group (63 768±12 665) RMBs, (t=1.71, P 0.05). Conclusion: The results suggest that the two therapies have no difference in cost effective rate. Considering the physical and mental loss, the aneurysm intra-arteu GDC embolization was better than the aneurysm clapping for the patients with aneurysm that diameter less than 25 mm. (authors)

  17. Stability of metallic foams studied under microgravity

    CERN Document Server

    Wuebben, T; Banhart, J; Odenbach, S

    2003-01-01

    Metal foams are prepared by mixing a metal powder and a gas-releasing blowing agent, by densifying the mix to a dense precursor and finally foaming by melting the powder compact. The foaming process of aluminium foams is monitored in situ by x-ray radioscopy. One observes that foam evolution is accompanied by film rupture processes which lead to foam coalescence. In order to elucidate the importance of oxides for foam stability, lead foams were manufactured from lead powders having two different oxide contents. The two foam types were generated on Earth and under weightlessness during parabolic flights. The measurements show that the main function of oxide particles is to prevent coalescence, while their influence on bulk viscosity of the melt is of secondary importance.

  18. Study of two-phase foam flow

    Energy Technology Data Exchange (ETDEWEB)

    Gurbanov, R S; Guliev, B B; Mekhtiev, K G; Kerimov, R G

    1970-01-01

    The objectives of this study were to determine characteristics of aqueous foam flow through porous media and to estimate the depth of foam penetration into a formation. Foam was generated by mixing air and 1% solution of surfactant PO-1. Foam density was maintained at 0.14 g/cc in all experiments. The foam was passed through sand columns (800 mm long x 30 mm diam) of permeabilities 26, 39, 80, 111, and 133 darcys. Flow rates were measured at various pressure drops and the relationship between system parameters was expressed analytically and graphically. From the data, distance of foam penetration into a formation as a function of pressure drop and permeability was calculated. The data indicate that under most conditions, foam will penetrate the formation to a negligible distance. This study indicates that when foam is used to remove sand from a well, a negligible loss of foam to the formation occurs.

  19. Difference in aneurysm characteristics between patients with familial and sporadic aneurysmal subarachnoid haemorrhage

    NARCIS (Netherlands)

    Mensing, Liselore A.; Rinkel, Gabriel J E; Vlak, Monique H M; Van Der Schaaf, Irene C.; Ruigrok, Ynte M.

    2016-01-01

    Object Patients with familial intracranial aneurysms (IA) have a higher risk of rupture than patients with sporadic IA. We compared geometric and morphological risk factors for aneurysmal rupture between patients with familial and sporadic aneurysmal subarachnoid hemorrhage (aSAH) to analyse if

  20. Infected aortic aneurysm and inflammatory aortic aneurysm. In search of an optimal differential diagnosis

    International Nuclear Information System (INIS)

    Ishizaka, Nobukazu; Sohmiya, Koichi; Miyamura, Masatoshi; Umeda, Tatsuya; Tsuji, Motomu; Katsumata, Takahiro; Miyata, Tetsuro

    2012-01-01

    Infected aortic aneurysm and inflammatory aortic aneurysm each account for a minor fraction of the total incidence of aortic aneurysm and are associated with periaortic inflammation. Despite the similarity, infected aortic aneurysm generally shows a more rapid change in clinical condition, leading to a fatal outcome; in addition, delayed diagnosis and misuse of corticosteroid or immunosuppressing drugs may lead to uncontrolled growth of microorganisms. Therefore, it is mandatory that detection of aortic aneurysm is followed by accurate differential diagnosis. In general, infected aortic aneurysm appears usually as a saccular form aneurysm with nodularity, irregular configuration; however, the differential diagnosis may not be easy sometimes for the following reasons: symptoms, such as abdominal and/or back pain and fever, and blood test abnormalities, such as elevated C-reactive protein and enhanced erythrocyte sedimentation rate, are common in infected aortic aneurysm, but they are not found infrequently in inflammatory aortic aneurysm; some inflammatory aortic aneurysms are immunoglobulin (Ig) G4-related, but not all of them; the prevalence of IgG4 positivity in infected aortic aneurysm has not been well investigated; enhanced uptake of 18F-fluorodeoxyglucose (FDG) by 18F-FDG-positron emission tomography may not distinguish between inflammation mediated by autoimmunity and that mediated by microorganism infection. Here we discuss the characteristics of these two forms of aortic aneurysm and the points of which we have to be aware before reaching a final diagnosis. (author)

  1. Aneurysm occlusion in elderly patients with aneurysmal subarachnoid haemorrhage : a cost-utility analysis

    NARCIS (Netherlands)

    Koffijberg, H.; Buskens, E.; Rinkel, G. J. E.

    Background Aneurysm occlusion after subarachnoid haemorrhage (SAH) aims to improve outcome by reducing the rebleeding risk. With increasing age, overall prognosis decreases, and the complications of aneurysm occlusion increase. The balance of risks for aneurysm occlusion in elderly SAH patients in

  2. A review of aqueous foam in microscale.

    Science.gov (United States)

    Anazadehsayed, Abdolhamid; Rezaee, Nastaran; Naser, Jamal; Nguyen, Anh V

    2018-06-01

    In recent years, significant progress has been achieved in the study of aqueous foams. Having said this, a better understanding of foam physics requires a deeper and profound study of foam elements. This paper reviews the studies in the microscale of aqueous foams. The elements of aqueous foams are interior Plateau borders, exterior Plateau borders, nodes, and films. Furthermore, these elements' contribution to the drainage of foam and hydraulic resistance are studied. The Marangoni phenomena that can happen in aqueous foams are listed as Marangoni recirculation in the transition region, Marangoni-driven flow from Plateau border towards the film in the foam fractionation process, and Marangoni flow caused by exposure of foam containing photosurfactants under UV. Then, the flow analysis of combined elements of foam such as PB-film along with Marangoni flow and PB-node are studied. Next, we contrast the behavior of foams in different conditions. These various conditions can be perturbation in the foam structure caused by injected water droplets or waves or using a non-Newtonian fluid to make the foam. Further review is about the effect of oil droplets and particles on the characteristics of foam such as drainage, stability and interfacial mobility. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. Isolated iliac artery aneurysms with associated hydronephrosis.

    LENUS (Irish Health Repository)

    O'Driscoll, D

    2012-02-03

    An isolated iliac artery aneurysm is where there is aneurysmal dilatation of one or more branches of the iliac system, with no associated dilatation of the aorta. Such aneurysms are rare and comprise 1% of all intra-abdominal aneurysms. The signs and symptoms of such an aneurysm are influenced by its concealed location within the bony pelvis. Awareness of these special characteristics improves the chances of early diagnosis and proper treatment before possible rupture. We present the clinical and radiological features of three such aneurysms. Ultrasound was the first imaging modality to be performed. Ipsilateral hydronephrosis was demonstrated in each case, this lead to imaging the pelvis and the correct diagnosis. We review the clinical and radiological literature and conclude that the pelvis should be imaged in all cases of unexplained hydronephrosis.

  4. Development of drilling foams for geothermal applications

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, W.J.; Remont, L.J.; Rehm, W.A.; Chenevert, M.E.

    1980-01-01

    The use of foam drilling fluids in geothermal applications is addressed. A description of foams - what they are, how they are used, their properties, equipment required to use them, the advantages and disadvantages of foams, etc. - is presented. Geothermal applications are discussed. Results of industry interviews presented indicate significant potential for foams, but also indicate significant technical problems to be solved to achieve this potential. Testing procedures and results of tests on representative foams provide a basis for work to develop high-temperature foams.

  5. Endovascular treatment for pediatric intracranial aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Xianli; Jiang, Chuhan; Li, Youxiang; Yang, Xinjian; Wu, Zhongxue [Capital Medical University, Beijing Neurosurgical Institute and Beijing Tiantan Hospital, Beijing, Hebei (China)

    2009-11-15

    The purpose of this study is to report the characteristics and outcomes of pediatric patients with intracranial aneurysms. From 1998 to 2005, 25 pediatric patients (aged {<=}17 years) with intracranial aneurysm were treated at our institute. Eleven of 25 patients had subarachnoid hemorrhage. In ten patients, the aneurysm was an incidental finding. One patient presented with cranial nerves dysfunction and three with neurological deficits. The locations of the aneurysms were as follows: vertebral artery (VA; n = 9), middle cerebral artery (MCA; n = 5), posterior cerebral artery (PCA; n = 4), basilar artery (BA; n = 2), anterior communicating artery (n = 2), anterior cerebral artery (n = 2), and internal carotid artery (n = 1). Five patients were treated with selective embolization with coils. Sixteen patients were treated with parent vessel occlusion (PVO). Eight PVOs were performed with balloons and eight were performed with coils. One patient with a VA aneurysm was spontaneously thrombosed 4 days after the initial diagnostic angiogram. In three patients treated with stent alone or stent-assisted coiling, one with BA trunk aneurysm died. One aneurismal recurrence occurred and was retreated. At a mean follow-up duration of 23.5 months, 96% of patients had a Glasgow Outcome Scale score of 4 or 5. Pediatric intracranial aneurysms occur more commonly in male patients and have a predilection for the VA, PCA, and MCA. PVO is an effective and safe treatment for fusiform aneurysms. Basilar trunk fusiform aneurysms were difficult to treat and were associated with a high mortality rate. (orig.)

  6. What You Should Know about Cerebral Aneurysms

    Science.gov (United States)

    ... This should include a discussion with a cerebrovascular neurosurgeon who specializes in surgically clipping aneurysms, a neurosurgeon with endovascular expertise and training, a neurointerventionalist (a ...

  7. Mycotic Aneurysm of the Aortic Arch

    Directory of Open Access Journals (Sweden)

    Ji Hye Seo

    2014-08-01

    Full Text Available A mycotic aneurysm of the thoracic aorta is rare. We report a case of mycotic aneurysm that developed in the aortic arch. An 86-year-old man was admitted with fever and general weakness. Blood culture yielded methicillin-resistant Staphylococcus aureus. Chest X-ray showed an enlarged aortic arch, and computed tomography scan revealed an aneurysm in the aortic arch. The patient was treated only with antibiotics and not surgically. The size of the aneurysm increased rapidly, resulting in bronchial obstruction and superimposed pneumonia. The patient died of respiratory failure.

  8. Tingkat Adaptasi Kepemimpinan Kepala Sekolah Menghadapi Situasi dalam Pengambilan Keputusan Strategik: Studi di SMP Kota Semarang 2005

    Directory of Open Access Journals (Sweden)

    Arief Yulianto

    2011-06-01

    Full Text Available Penelitian ini bertujuan mengatahui karakteristik kepemimpinan Kepala SMP dalam melakukan adaptasi dengan lingkungan kerja dan Mengetahui peran serta yang diberikan seluruh anggota sekolah dalam pengambilan keputusan strategis kepada Kepala SMP.Sasaran studi ini dipilih berdasarkan teknik representative purposive sampling, yaitu  sebanyak 16 SMP di kota Semarang serta dengan purposive (syarat yaitu telah menerapkan MBS . Model analisis data yang dilakukan adalah dengan menggunakan model LASI (Leadership Adaptability and Style Inventory. Pembahasan Analisis Situasional. Pada pembahasan ini adalah mengenai deskripsi gaya kepemimpinan Kepala SMP terkait dengan lingkungan yang ada di lingkungannya. Indikator pada gaya kepemimpinan ini adalah tingkat penyelesaian pekerjaan (perilaku tugas serta hubungan personal dan organisasi (interaksional baik secara individu maupun kelompok. Dari hasil data primer yang didapat, sesuai dengan 12 situasi dalam variabel LASI. Pembahasan Analisis Situasiona .Pada pembahasan ini adalah mengenai deskripsi gaya kepemimpinan Kepala SMP terkait dengan lingkungan yang ada di lingkungannya. Indikator pada gaya kepemimpinan ini adalah tingkat penyelesaian pekerjaan (perilaku tugas serta hubungan personal dan organisasi (interaksional baik secara individu maupun kelompok. Dari hasil data primer yang didapat, sesuai dengan 12 situasi dalam variabel LASI maka dapat diinterpresikan sebagai berikut Kata Kunci: Kepemimpinan Adaptif, Model LASI,MBS

  9. Biopolymer foams - Relationship between material characteristics and foaming behavior of cellulose based foams

    International Nuclear Information System (INIS)

    Rapp, F.; Schneider, A.; Elsner, P.

    2014-01-01

    Biopolymers are becoming increasingly important to both industry and consumers. With regard to waste management, CO 2 balance and the conservation of petrochemical resources, increasing efforts are being made to replace standard plastics with bio-based polymers. Nowadays biopolymers can be built for example of cellulose, lactic acid, starch, lignin or bio mass. The paper will present material properties of selected cellulose based polymers (cellulose propionate [CP], cellulose acetate butyrate [CAB]) and corresponding processing conditions for particle foams as well as characterization of produced parts. Special focus is given to the raw material properties by analyzing thermal behavior (differential scanning calorimetry), melt strength (Rheotens test) and molecular weight distribution (gel-permeation chromatography). These results will be correlated with the foaming behavior in a continuous extrusion process with physical blowing agents and underwater pelletizer. Process set-up regarding particle foam technology, including extrusion foaming and pre-foaming, will be shown. The characteristics of the resulting foam beads will be analyzed regarding part density, cell morphology and geometry. The molded parts will be tested on thermal conductivity as well as compression behavior (E-modulus, compression strength)

  10. Biopolymer foams - Relationship between material characteristics and foaming behavior of cellulose based foams

    Science.gov (United States)

    Rapp, F.; Schneider, A.; Elsner, P.

    2014-05-01

    Biopolymers are becoming increasingly important to both industry and consumers. With regard to waste management, CO2 balance and the conservation of petrochemical resources, increasing efforts are being made to replace standard plastics with bio-based polymers. Nowadays biopolymers can be built for example of cellulose, lactic acid, starch, lignin or bio mass. The paper will present material properties of selected cellulose based polymers (cellulose propionate [CP], cellulose acetate butyrate [CAB]) and corresponding processing conditions for particle foams as well as characterization of produced parts. Special focus is given to the raw material properties by analyzing thermal behavior (differential scanning calorimetry), melt strength (Rheotens test) and molecular weight distribution (gel-permeation chromatography). These results will be correlated with the foaming behavior in a continuous extrusion process with physical blowing agents and underwater pelletizer. Process set-up regarding particle foam technology, including extrusion foaming and pre-foaming, will be shown. The characteristics of the resulting foam beads will be analyzed regarding part density, cell morphology and geometry. The molded parts will be tested on thermal conductivity as well as compression behavior (E-modulus, compression strength).

  11. Microsurgical clipping of ophthalmic artery aneurysms: surgical results and visual outcomes with 208 aneurysms.

    Science.gov (United States)

    Kamide, Tomoya; Tabani, Halima; Safaee, Michael M; Burkhardt, Jan-Karl; Lawton, Michael T

    2018-01-26

    OBJECTIVE While most paraclinoid aneurysms can be clipped with excellent results, new postoperative visual deficits are a concern. New technology, including flow diverters, has increased the popularity of endovascular therapy. However, endovascular treatment of paraclinoid aneurysms is not without procedural risks, is associated with higher rates of incomplete aneurysm occlusion and recurrence, and may not address optic nerve compression symptoms that surgical debulking can. The increasing endovascular management of paraclinoid aneurysms should be justified by comparisons to surgical benchmarks. The authors, therefore, undertook this study to define patient, visual, and aneurysm outcomes in the most common type of paraclinoid aneurysm: ophthalmic artery (OphA) aneurysms. METHODS Results from microsurgical clipping of 208 OphA aneurysms in 198 patients were retrospectively reviewed. Patient demographics, aneurysm morphology (size, calcification, etc.), clinical characteristics, and patient outcomes were recorded and analyzed. RESULTS Despite 20% of these aneurysms being large or giant in size, complete aneurysm occlusion was accomplished in 91% of 208 cases, with OphA patency preserved in 99.5%. The aneurysm recurrence rate was 3.1% and the retreatment rate was 0%. Good outcomes (modified Rankin Scale score 0-2) were observed in 96.2% of patients overall and in all 156 patients with unruptured aneurysms. New visual field defects (hemianopsia or quadrantanopsia) were observed in 8 patients (3.8%), decreased visual acuity in 5 (2.4%), and monocular blindness in 9 (4.3%). Vision improved in 9 (52.9%) of the 17 patients with preoperative visual deficits. CONCLUSIONS The most important risk associated with clipping OphA aneurysms is a new visual deficit. Meticulous microsurgical technique is necessary during anterior clinoidectomy, aneurysm dissection, and clip application to optimize visual outcomes, and aggressive medical management postoperatively might potentially

  12. Symptomatic unruptured cerebral aneurysms. Features and surgical outcome

    International Nuclear Information System (INIS)

    Date, Isao

    2010-01-01

    Development of less invasive imaging studies, such as magnetic resonance angiography, has increased the chances that unruptured cerebral aneurysms are found. The rupture risk of 'symptomatic' aneurysms is higher than for 'asymptomatic' aneurysms; so 'symptomatic' aneurysms are more often surgically treated. Many reviews examine 'asymptomatic' unruptured cerebral aneurysms, but few evaluate 'symptomatic' aneurysms. The author has treated many patients with symptomatic unruptured cerebral aneurysms and found that improved cranial nerve signs can be expected if the surgical treatment is performed before the symptoms become irreversible; the critical period is approximately 3 months. It is important to suppress the pulsation of the aneurysms compressing the cranial nerves; both a clipping procedure and endovascular coiling are effective. Cranial nerve signs are more commonly the symptoms of unruptured cerebral aneurysms, but large to giant aneurysms can also be the causes of hemiparesis, hydrocephalus, epilepsy, or even cerebral infarction. This review summarizes the features and surgical outcome of symptomatic unruptured cerebral aneurysms. (author)

  13. Liquid versus foam sclerotherapy.

    Science.gov (United States)

    Hamel-Desnos, C; Allaert, F-A

    2009-12-01

    A systematic review to compare efficacy and safety of foam (F) sclerotherapy versus liquid (L) sclerotherapy for primary varicose veins of the lower limbs. Systematic searches of electronic databases were conducted in April 2009 to identify relevant published studies. Database searches were augmented with abstracts from conference proceedings and electronic and hand searching of journals not consistently indexed in the major databases. For treatment of saphenous veins, six trials (four randomized controlled trials) were considered. Despite containing much less sclerosing agent, F was markedly more effective compared with L, the difference being put at between 20% and 50%. Four studies were included in a meta-analysis showing efficacy of F at 76.8% (95% confidence interval [CI] 71-82) versus L at 39.5% (95% CI 33-46), chi(2) = 60.9740; P reticular veins and telangiectases, only two comparative trials were found and do not at present provide any conclusive evidence to support the superiority of efficacy of one form over the other. Statistically, the side-effects reported in all the available comparative trials do not differ between F and L forms, even if visual disturbances seem to be more common with F. In the treatment of varices of the lower limbs, F shows much greater efficacy compared to L. Concerning the side effects, no statistical significant differences were found between L and F.

  14. Foam-mat drying technology: A review.

    Science.gov (United States)

    Hardy, Z; Jideani, V A

    2017-08-13

    This article reviews various aspects of foam-mat drying such as foam-mat drying processing technique, main additives used for foam-mat drying, foam-mat drying of liquid and solid foods, quality characteristics of foam-mat dried foods, and economic and technical benefits for employing foam-mat drying. Foam-mat drying process is an alternative method that allows the removal of water from liquid materials and pureed materials. In this drying process, a liquid material is converted into foam that is stable by being whipped after adding an edible foaming agent. The stable foam is then spread out in sheet or mat and dried by using hot air (40-90°C) at atmospheric pressure. Methyl cellulose (0.25-2%), egg white (3-20%), maltodextrin (0.5-05%), and gum Arabic (2-9%) are the commonly utilized additives for the foam-mat drying process at the given range, either combined together for their effectiveness or individual effect. The foam-mat drying process is suitable for heat sensitive, viscous, and sticky products that cannot be dried using other forms of drying methods such as spray drying because of the state of product. More interest has developed for foam-mat drying because of the simplicity, cost effectiveness, high speed drying, and improved product quality it provides.

  15. Stability analysis of uniform equilibrium foam states for EOR processes

    NARCIS (Netherlands)

    Ashoori, E.; Marchesin, D.; Rossen, W.R.

    2011-01-01

    The use of foam for mobility control is a promising mean to improve sweep efficiency in EOR. Experimental studies discovered that foam exhibits three different states (weak foam, intermediate foam, and strong foam). The intermediate-foam state is found to be unstable in the lab whereas the weak- and

  16. Popliteal Artery Aneurysm in Women

    DEFF Research Database (Denmark)

    Ravn, Hans; Pansell-Fawcett, Karin; Björck, Martin

    2017-01-01

    OBJECTIVES: Ninety-five per cent of those operated on for popliteal artery aneurysm (PA) are men. Thus, PAs in women are difficult to investigate. The aim was to study the disease in women. METHODS: Women treated for PA in 1987-2012, prospectively registered in the Swedish vascular registry......, Swedvasc, supplemented by case records, were compared with the larger male cohort. Survival was determined through cross linkage with the National Population Registry. RESULTS: 1509 patients (men and women), 1872 legs, were identified; of these 74 patients (4.9%) were women, 81 legs (4.3%). The median age...... was 70 years in women versus 69 in men. Twenty-nine centres operated on women (range 1-7 women/centre). There were no time trends in the proportion of women operated on (p=.5). Bilateral PA occurred in 9.5% of women and 27.0% of men (p=.002). For symptomatic aneurysms, there was a larger proportion...

  17. Soft tissue aneurysmal bone cyst

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X.L.; Gielen, J.L.; Delrue, F.; De Schepper, A.M.A. [Department of Radiology, Universitair Ziekenhuis Antwerpen (University of Antwerp), Wilrijkstraat 10, 2650, Edegem (Belgium); Salgado, R. [Department of Pathology, Universitair Ziekenhuis Antwerpen (University of Antwerp), Wilrijkstraat 10, 2650, Edegem (Belgium)

    2004-08-01

    A soft tissue aneurysmal bone cyst located in the right gluteus medius of a 21-year-old man is reported. On conventional radiography, the lesion demonstrated a spherically trabeculated mass with a calcific rim. On CT scan, it showed a well-organized peripheral calcification resembling a myositis ossificans. On MRI, it presented as a multilocular, cystic lesion with fluid-fluid levels. The lesion had no solid components except for intralesional septa. Although findings on imaging and histology were identical to those described in classical aneurysmal bone cyst, diagnosis was delayed because of lack of knowledge of this entity and its resemblance to the more familiar post-traumatic heterotopic ossification (myositis ossificans). (orig.)

  18. Soft tissue aneurysmal bone cyst

    International Nuclear Information System (INIS)

    Wang, X.L.; Gielen, J.L.; Delrue, F.; De Schepper, A.M.A.; Salgado, R.

    2004-01-01

    A soft tissue aneurysmal bone cyst located in the right gluteus medius of a 21-year-old man is reported. On conventional radiography, the lesion demonstrated a spherically trabeculated mass with a calcific rim. On CT scan, it showed a well-organized peripheral calcification resembling a myositis ossificans. On MRI, it presented as a multilocular, cystic lesion with fluid-fluid levels. The lesion had no solid components except for intralesional septa. Although findings on imaging and histology were identical to those described in classical aneurysmal bone cyst, diagnosis was delayed because of lack of knowledge of this entity and its resemblance to the more familiar post-traumatic heterotopic ossification (myositis ossificans). (orig.)

  19. Silent Patent Ductus Arteriosus Aneurysm

    Directory of Open Access Journals (Sweden)

    Aline Medeiros Botta

    2002-09-01

    Full Text Available Ductus arteriosus aneurysm, a rare and potentially fatal condition, has been reported as a complication after surgical ductus arteriosus closure. Its spontaneous appearance as a septic complication, which was common in the presurgical and preantibiotic era, has been rarely reported in the contemporary literature. Persistence of silent ductus arteriosus in healthy children and adults is a frequent condition that currently has an increasing diagnostic possibility due to the availability of more accurate investigative methods, especially echocardiography. We report the case of a 1-year-old child, in whom no previous heart disease was known, who developed a giant aneurysm of the ductus arteriosus during a staphylococcal infection. This complication appeared after craniotomy for emptying an accidental subdural hematoma. This report associates the persistence of ductus arteriosus with a complication considered rare, which has a rapidly fatal evolution.

  20. Aneurysmal subarachnoid hemorrhage: outcome of aneurysm clipping versus coiling in anterior circulation aneurysm

    International Nuclear Information System (INIS)

    Wadd, I.H.; Haroon, A.; Ansari, S.

    2015-01-01

    To compare the neurological outcome of microsurgical clipping versus coiling in patients with anterior circulation aneurysm. Study Design: Comparative study. Place and Duration of Study: Department of Neurosurgery, Lahore General Hospital, Lahore, from January 2010 to December 2013. Methodology: Patients aged 14 - 60 years, with ruptured cerebral aneurysm of anterior circulation and World Federation of Neurosurgical Society (WFNS) grades 1, 2 and 3 were included. Patients more than 60 years, medically unfit patient and posterior circulation aneurysms and WFNS grades 4 and 5 were excluded. Aneurysm sac obliteration was done in randomized manner with microsurgical clipping or coiling. Postoperatively, the patients were assessed and followed-up upto one year for outcome parameters on the bases of WFNS grade and Modified Ranking Scale (mRS) as favourable (mRS =2 ) and unfavourable (mRS > 2). Results: Among 140 subjects selected for study, 70 were included in group A, i.e. coiling and other 70 were in group B, i.e. clipping. The median age of patients in group A was 52.5 ± 10 years and in group B was 51.00 ± years. Overall, 56 (40%) males, 28 (60%) males in each group; and 84 (60%) females, 42 (60%) in each group were included. The male to female ratio in this study was 1:1.5. In group A, i.e. coiling, 27 (38.6%) patients had no disability (grades 1 and 2), 25 (35.7%) were slightly disabled (grade 3) and 18 (25.7%) had moderate disability (grade 4); whereas in group B, i.e. clipping group 23 (32.9%) patients had no disability (grades 1 and 2), 23 (32.9%) were slightly disabled (grade 3) and 24 (34.3%) had moderate disability (grade 4). At one year follow-up, in group A, favourable outcome was achieved in 56 (80%) of patients compared to 48 (68.6%) in group B; whilst, 14 (20%) patients in group A and 22 (33.1%) in group B showed unfavourable outcome. Although mortality rate was higher in clipping (n=3, 4.3%) as compared to coiling (n=1, 1.4%), but was not statistically

  1. Non-aneurysmal subarachnoid hemorrhage

    DEFF Research Database (Denmark)

    Bashir, Asma; Mikkelsen, Ronni; Sørensen, Leif

    2017-01-01

    Purpose Repeat imaging in patients with non-aneurysmal subarachnoid hemorrhage (NASAH) remains controversial. We aim to report our experience with NASAH with different hemorrhage patterns, and to investigate the need for further diagnostic workup to determine the underlying cause of hemorrhage. M...... adequate with absence of hematoma and vasospasm. In contrast, a follow-up DSA should be mandatory for confirming or excluding vascular pathology in case of nPMSAH in order to prevent rebleeding....

  2. PENGEMBANGAN MEDIA PEMBELAJARAN IPS SEJARAH MELALUI APLIKASI SWAY BERKONTEN INDIS DI SMP NEGERI 8 MADIUN

    Directory of Open Access Journals (Sweden)

    Khoirul Huda

    2017-08-01

    Full Text Available Education in Indonesia is seen from the perspective of the present field experiencing many multicomplex problems. The role of educators in utilizing learning conditions through the composition of teaching tools has not been powerless. Minimnya in designing models, strategies or media that are not adequate. This condition is often seen in SMP Negeri 8 Madiun. Based on the observations mention First, the teaching model of IPS History is still conventional with the lecture method. Educators have not taken advantage of interesting and interactive media variations leading to saturation. Second, the limitations of resource utilization. Whereas the surrounding environment learning source can be used for learning IPS History such as Indis building (Housing Employee KA, SMPN 1 Madiun School Building, City Hall, Giringan PLTA, pagotan sugar factory and kawedanan Uteran or Kandangan coffee garden. The purpose of this research is to develop the media office Sway berkonten Indis to form a draft prototype that has been tested. Research type is Research and Development. The result of this research is limited test at SMP Negeri 10 Madiun got average score 4,23, produce very good score (X => 4,21 so media is considered feasible. The expanded scale test at SMP Negeri 8 Madiun shows the average of 60,35 (pre-test and 94,46 (post-test, and statistic test of Paired Samples T Test. The result of significance value is 0.00, so the result shows less than 0.05 and  means rejected so that there has been a significant increase.

  3. Desain Didaktis Penalaran Matematis untuk Mengatasi Kesulitan Belajar Siswa SMP pada Luas dan Volume Limas

    Directory of Open Access Journals (Sweden)

    Sulistiawati Sulistiawati

    2015-12-01

    Full Text Available Penelitian ini dilatarbelakangi oleh rendahnya kemampuan penalaran matematis siswa SMP pada materi geometri. Metode penelitian yang digunakan adalah penelitian desain didaktis (didactial design research.  Penelitian diawali dengan studi pendahuluan untuk mendapatkan data kesulitan belajar (learning obstacle yang dilaksanakan di SMP Negeri 29 Bandung kelas IXE sebanyak 35 orang, SMA Negeri 1 Lembang kelas XI IPA2 sebanyak 41 orang, dan STKIP Siliwangi Bandung mahasiswa semester VI sebanyak 49 orang pada tahun pelajaran 2011/2012 semester genap. Selanjutnya, dikembangkan desain didaktis yang diujicobakan terbatas kepada 30 siswa kelas VIII B SMP Assalam Bandung. Dari uji coba terbatas dilakukan analisis untuk menyusun desain didaktis revisi. Hasil dari penelitian ini diantaranya perangkat pembelajaran yang digunakan pada pembelajaran sebelum menggunakan desain didaktis belum dapat menggali kemampuan penalaran matematis, desain didaktis penalaran matematis yang dikembangkan dapat memperkecil gap yang dihadapi siswa, dan siswa memberikan tanggapan positif terhadap desain didaktis yang dikembangkan.The background of this research was the lack of junior high school students’ mathematical reasoning in geometry. This research used Didactical Design Research (DDR method which started by a preliminary study to 35 students of grade IX E Public Junior High School 29 Bandung, 41 students of grade XI Science Program of Senior High School 1 Lembang, and 49 students of Siliwangi College of Education Bandung in semester VI for academic year 2011/2012. The preliminary study was aimed to explore students’ learning obstacles to develep didactical design. The developed didactical design was implemented to 30 students of grade VII B of Assalam Junior High School Bandung. After this implementation the developed didactical design was revised. The results of this research were the learning tools used by previous teacher have not explored mathematical reasoning yet

  4. Profil Problem Emosi/ Perilaku Pada Remaja Pelajar SMP-SMA Di Kota Semarang

    Directory of Open Access Journals (Sweden)

    Annastasia Ediati

    2015-10-01

    Full Text Available The aims of this study is to identify the profile of emotional/behavioral problems on adolescents students of junior and senior high school (SMP-SMA in Semarang, Central Java. The subjects comprised 568 students (grade VII and X; males and females, aged between 13-17 years. Data were collected using the Indonesian translation of the Youth Self Report (YSR. The results of data analysis showed that adolescents in the junior high school/SMP reported emotional/behavioral problems more frequently than the adolescents in the senior high school/SMA (t (566 = 2.08, p = .038, especially in terms of social relations (t (566 = 2.92, p = .004, thought problems (t (566 = 2.47, p = .014, somatic complaints (t(566 = 2.98, p = .002, rule-breaking behavior (t (566 = 6.63, p < .001, and externalizing problems (t(566 = 3,37; p = .001. Gender differences was found in the adolescents’ emotional/behavioral problems. In group of junior high school students (SMP, girls reported more emotional problems than boys (t(335 = -3.55; p < .001, particularly in anxiety/depression (t(335 = -6.51; p < .001; withdrawal (t(335 = -4.26; p < .001, somatic complaints (t(335 = -2.86; p = .004; social problems (t(335 = -3.30; p = .001, attention problems (t(335 = -2.39; p = .017; and internalizing problem (t(335 = -5.76; p < .001. In group of senior high school students (SMA, boys reported more externalizing problems (t(229 = 2.10; p = .037 and rule-breaking behavior (t(229 = 4.44; p < .001 than girls. In contrasts, girls reported more somatic complaints than boys (t(229 = -3.09; p = .001. Adolescents’ emotional/behavioral problems should gained more attention. Preventive as well as curative intervention is needed, particularly intervention that sensitive to gender and age, which also involve significant figures for adolescents (parents, school teachers, and peers.

  5. EFEKTIVITAS BAHAN AJAR IPA TERPADU TERHADAP KEMAMPUAN BERPIKIR TINGKAT TINGGI SISWA SMP

    Directory of Open Access Journals (Sweden)

    L. Yuliati

    2013-01-01

    Full Text Available Penelitian ini bertujuan untuk menguji efektivitas bahan ajar IPA terpadu untuk SMP, khususnya tema Air Limbah Rumah Tangga. Desain penelitian menggunakan kuasi-eksperimen dengan Pretest-Postest Control Group Design. Penelitian dilaksanakan di SMPN 20 Malang kelas VII. Sampel ditetapkan dengan purposive sampling. Perlakuan pada kelompok eksperimen adalah pembelajaran yang menggunakan bahan ajar IPA terpadu, sedangkan kelompok kontrol  menggunakan buku  sekolah elektronik (BSE. Instrumen yang digunakan adalah butir soal tes, lembar observasi pembelajaran, dan perangkat  pembelajaran. Analisis data dilakukan dengan Anava AB untuk uji perbedaan rerata dan uji scheffe untuk uji efektivitas bahan ajar. Hasil penelitian menunjukkan bahwa terdapat perbedaan kemampuan berpikir tingkat tinggi pada siswa SMP yang menggunakan bahan ajar IPA Terpadu dengan siswa SMP yang menggunakan bahan ajar IPA yang terpisah bidang kajiannya, dan bahan ajar IPA terpadu efektif untuk meningkatkan kemampuan berpikir tingkat tinggi siswa. This study aims totest the effectiveness of an integrated science teaching materials for students of junior high school, particularly in themeof Domestic Wastewater. The study designused a quasi-experimental pretest-posttest with control group design. The experiment was conductedin Junior High School of Malang. Samples were determined by purposive sampling. Treatmentin the experimental group was learning to integrated science teaching materials, whereas in the control group with the teaching materials available in schools. The instrument used were a matter oftestitems, observation sheets of learning, and learningtools. Data analysis was performed with AnovaAB totestmean difference and Scheffetesttotestthe effectiveness ofinstructional materials. The results showed that 1there aredifferences inhigher-order thinkingskillsinjunior high school students using teaching materials in integrated science withjunior high school students

  6. Foam for combating mine fires

    Energy Technology Data Exchange (ETDEWEB)

    1989-09-01

    The application of foam in dealing with underground fire is well known due to its smothering action by cutting off air feed to burning fuel as well as acting as coolant. Besides plugging air feed to fire, water could be virtually reached to the fire affected areas much beyond the jet range as underground galleries with low roof restrict jet range of water. This method also enables a closer approach of a fire fighting team by isolating the toxic gases and smoke with a foam plug. The paper describes the development of high expansion foam composition and its application technology in order that foam plug method can be suitably utilized for combating mine fires in India. Three compositions were recommended for generation of high expansion foam: (a) 0.5% sodium/ammonium lauryl sulphate, 0.15 to 0.2% sodium carboxy methyl cellulose, 0.1% booster; (b) 0.5% sodium/ammonium lauryl sulfate, 0.12 to 0.15% alkaline solution of gum arabic, 0.1 to 0.2% ferrous gluconate; and (c) 0.35% sodium/ammonium lauryl sulfate, 0.20% booster, 0.2% xylene sulfonate.

  7. Numerical modeling of foam flows

    International Nuclear Information System (INIS)

    Cheddadi, Ibrahim

    2010-01-01

    Liquid foam flows are involved in numerous applications, e.g. food and cosmetics industries, oil extraction, nuclear decontamination. Moreover, their study leads to fundamental knowledge: as it is easier to manipulate and analyse, foam is used as a model material to understand the flow of emulsions, polymers, pastes, or cell aggregates, all of which display both solid and liquid behaviour. Systematic experiments performed by Francois Graner et al. provide precise data that emphasize the non Newtonian properties of the foam. Meanwhile, Pierre Saramito proposed a visco-elasto-plastic continuous tensorial model, akin to predict the behaviour of the foam. The goal of this thesis is to understand this complex behaviour, using these two elements. We have built and validated a resolution algorithm based on a bidimensional finite elements methods. The numerical solutions are in excellent agreement with the spatial distribution of all measured quantities, and confirm the predictive capabilities of the model. The dominant parameters have been identified and we evidenced the fact that the viscous, elastic, and plastic contributions to the flow have to be treated simultaneously in a tensorial formalism. We provide a substantial contribution to the understanding of foams and open the path to realistic simulations of complex VEP flows for industrial applications. (author)

  8. A graphite foam reinforced by graphite particles

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, J.J.; Wang, X.Y.; Guo, L.F.; Wang, Y.M.; Wang, Y.P.; Yu, M.F.; Lau, K.T.T. [DongHua University, Shanghai (China). College of Material Science and Engineering

    2007-11-15

    Graphite foam was obtained after carbonization and graphitization of a pitch foam formed by the pyrolysis of coal tar based mesophase pitch mixed with graphite particles in a high pressure and temperature chamber. The graphite foam possessed high mechanical strength and exceptional thermal conductivity after adding the graphite particles. Experimental results showed that the thermal conductivity of modified graphite foam reached 110W/m K, and its compressive strength increased from 3.7 MPa to 12.5 MPa with the addition of 5 wt% graphite particles. Through the microscopic observation, it was also found that fewer micro-cracks were formed in the cell wall of the modified foam as compared with pure graphite foam. The graphitization degree of modified foam reached 84.9% and the ligament of graphite foam exhibited high alignment after carbonization at 1200{sup o}C for 3 h and graphitization at 3000{sup o}C for 10 min.

  9. Some aspects of image processing using foams

    International Nuclear Information System (INIS)

    Tufaile, A.; Freire, M.V.; Tufaile, A.P.B.

    2014-01-01

    We have explored some concepts of chaotic dynamics and wave light transport in foams. Using some experiments, we have obtained the main features of light intensity distribution through foams. We are proposing a model for this phenomenon, based on the combination of two processes: a diffusive process and another one derived from chaotic dynamics. We have presented a short outline of the chaotic dynamics involving light scattering in foams. We also have studied the existence of caustics from scattering of light from foams, with typical patterns observed in the light diffraction in transparent films. The nonlinear geometry of the foam structure was explored in order to create optical elements, such as hyperbolic prisms and filters. - Highlights: • We have obtained the light scattering in foams using experiments. • We model the light transport in foams using a chaotic dynamics and a diffusive process. • An optical filter based on foam is proposed

  10. Aneurysm Recurrence Volumetry Is More Sensitive than Visual Evaluation of Aneurysm Recurrences.

    Science.gov (United States)

    Schönfeld, M H; Schlotfeldt, V; Forkert, N D; Goebell, E; Groth, M; Vettorazzi, E; Cho, Y D; Han, M H; Kang, H-S; Fiehler, J

    2016-03-01

    Considerable inter-observer variability in the visual assessment of aneurysm recurrences limits its use as an outcome parameter evaluating new coil generations. The purpose of this study was to compare visual assessment of aneurysm recurrences and aneurysm recurrence volumetry with an example dataset of HydroSoft coils (HSC) versus bare platinum coils (BPC). For this retrospective study, 3-dimensional time-of-flight magnetic resonance angiography datasets acquired 6 and 12 months after endovascular therapy using BPC only or mainly HSC were analyzed. Aneurysm recurrence volumes were visually rated by two observersas well as quantified by subtraction of the datasets after intensity-based rigid registration. A total of 297 aneurysms were analyzed (BPC: 169, HSC: 128). Recurrences were detected by aneurysm recurrence volumetry in 9 of 128 (7.0 %) treated with HSC and in 24 of 169 (14.2 %) treated with BPC (odds ratio: 2.39, 95 % confidence interval: 1.05-5.48; P = 0.039). Aneurysm recurrence volumetry revealed an excellent correlation between observers (Cronbach's alpha = 0.93). In contrast, no significant difference in aneurysm recurrence was found for visual assessment (3.9 % in HSC cases and 4.7 % in BPC cases). Recurrences were observed in aneurysms smaller than the sample median in 10 of 33 (30.3 %) by aneurysm recurrence volumetry and in 1 of 13 (7.7 %) by visual assessment. Aneurysm recurrences were detected more frequently by aneurysm recurrence volumetry when compared with visual assessment. By using aneurysm recurrence volumetry, differences between treatment groups were detected with higher sensitivity and inter-observer validity probably because of the higher detection rate of recurrences in small aneurysms.

  11. PENGARUH MODEL PEMBELAJARAN AUDITORY, INTELLECTUALLY, AND REPETITION TERHADAP KEMAMPUAN PEMAHAMAN KONSEP DI SMP PUSTEK SERPONG

    Directory of Open Access Journals (Sweden)

    Selviani Fitri

    2016-09-01

    Full Text Available This research aims to know the effect of learning model of Auditory, Intellectually, and Repetition (AIR about cube concept comprehension to students' VIII grade at SMP Pustek Serpong. Kind of the research is experiment quasi research. The research instrument that used is analysis question pretest and postest. The data analyze by using normality test, homogenity test, and t-test. The result of the research show that there is the different ability of cube concept comprehension among students' who gave air learning model with convensional learning model. Keywords: Model Pembelajaran Auditory Intellectually and Repetition (AIR, concept comprehension

  12. PENGARUH PENGGUNAAN METODE PEMBELAJARAN DAN GAYA KOGNITIF TERHADAP HASIL BELAJAR MATEMATIKA SISWA SMP

    OpenAIRE

    Martinawati, Martinawati; kamid, Kamid; Asyhar, Rayandra

    2015-01-01

    This study aims to determine the effect of the method of learning and cognitive style on learning outcomes of junior high school math students. Research conducted at SMP Negeri 6 Tungkal Ulu, in classVII, the second semester in the Academic Year 2012/2013. The research design uses 3x2 factorial design. One treatment/factor with three levels (X1, X2 and X3) and the moderator variable that has two levels (Y1 and Y2). Research instrument stome asure the independent variable is the design of lear...

  13. Contribution of the backstreaming ions to the self-magnetic pinch (SMP) diode current

    Science.gov (United States)

    Mazarakis, Michael G.; Bennett, Nichelle; Cuneo, Michael E.; Fournier, Sean D.; Johnston, Mark D.; Kiefer, Mark L.; Leckbee, Joshua J.; Nielsen, Dan S.; Oliver, Bryan V.; Sceiford, Matthew E.; Simpson, Sean C.; Renk, Timothy J.; Ruiz, Carlos L.; Webb, Timothy J.; Ziska, Derek; Droemer, Darryl W.; Gignac, Raymond E.; Obregon, Robert J.; Wilkins, Frank L.; Welch, Dale R.

    2018-04-01

    The results presented here were obtained with a self-magnetic pinch (SMP) diode mounted at the front high voltage end of the RITS accelerator. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The RITS driver together with the SMP diode has produced x-ray spots of the order of 1 mm in diameter and doses adequate for the radiographic imaging of high area density objects. Although, through the years, a number of different types of radiographic electron diodes have been utilized with SABER, HERMES III and RITS accelerators, the SMP diode appears to be the most successful and simplest diode for the radiographic investigation of various objects. Our experiments had two objectives: first to measure the contribution of the back-streaming ion currents emitted from the anode target and second to try to evaluate the energy of those ions and hence the Anode-Cathode (A-K) gap actual voltage. In any very high voltage inductive voltage adder utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the A-K gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (˜1 cm) and the diode region very hostile. The accelerating voltage quoted in the literature is from estimates based on the measurements of the anode and cathode currents of the MITL far upstream from the diode and utilizing the para-potential flow theories and inductive corrections. Thus, it would be interesting to have another independent measurement to evaluate the A-K voltage. The diode's anode is made of a number of high-Z metals in order to produce copious and energetic flash x-rays. It was established experimentally that the back-streaming ion currents are a strong function of the anode materials and their stage of cleanness. We have measured the back-streaming ion currents emitted from the anode and propagating

  14. RTEMS SMP and MTAPI for Efficient Multi-Core Space Applications on LEON3/LEON4 Processors

    Science.gov (United States)

    Cederman, Daniel; Hellstrom, Daniel; Sherrill, Joel; Bloom, Gedare; Patte, Mathieu; Zulianello, Marco

    2015-09-01

    This paper presents the final result of an European Space Agency (ESA) activity aimed at improving the software support for LEON processors used in SMP configurations. One of the benefits of using a multicore system in a SMP configuration is that in many instances it is possible to better utilize the available processing resources by load balancing between cores. This however comes with the cost of having to synchronize operations between cores, leading to increased complexity. While in an AMP system one can use multiple instances of operating systems that are only uni-processor capable, a SMP system requires the operating system to be written to support multicore systems. In this activity we have improved and extended the SMP support of the RTEMS real-time operating system and ensured that it fully supports the multicore capable LEON processors. The targeted hardware in the activity has been the GR712RC, a dual-core core LEON3FT processor, and the functional prototype of ESA's Next Generation Multiprocessor (NGMP), a quad core LEON4 processor. The final version of the NGMP is now available as a product under the name GR740. An implementation of the Multicore Task Management API (MTAPI) has been developed as part of this activity to aid in the parallelization of applications for RTEMS SMP. It allows for simplified development of parallel applications using the task-based programming model. An existing space application, the Gaia Video Processing Unit, has been ported to RTEMS SMP using the MTAPI implementation to demonstrate the feasibility and usefulness of multicore processors for space payload software. The activity is funded by ESA under contract 4000108560/13/NL/JK. Gedare Bloom is supported in part by NSF CNS-0934725.

  15. Conceptual Design of Simulation Models in an Early Development Phase of Lunar Spacecraft Simulator Using SMP2 Standard

    Science.gov (United States)

    Lee, Hoon Hee; Koo, Cheol Hea; Moon, Sung Tae; Han, Sang Hyuck; Ju, Gwang Hyeok

    2013-08-01

    The conceptual study for Korean lunar orbiter/lander prototype has been performed in Korea Aerospace Research Institute (KARI). Across diverse space programs around European countries, a variety of simulation application has been developed using SMP2 (Simulation Modelling Platform) standard related to portability and reuse of simulation models by various model users. KARI has not only first-hand experience of a development of SMP compatible simulation environment but also an ongoing study to apply the SMP2 development process of simulation model to a simulator development project for lunar missions. KARI has tried to extend the coverage of the development domain based on SMP2 standard across the whole simulation model life-cycle from software design to its validation through a lunar exploration project. Figure. 1 shows a snapshot from a visualization tool for the simulation of lunar lander motion. In reality, a demonstrator prototype on the right-hand side of image was made and tested in 2012. In an early phase of simulator development prior to a kick-off start in the near future, targeted hardware to be modelled has been investigated and indentified at the end of 2012. The architectural breakdown of the lunar simulator at system level was performed and the architecture with a hierarchical tree of models from the system to parts at lower level has been established. Finally, SMP Documents such as Catalogue, Assembly, Schedule and so on were converted using a XML(eXtensible Mark-up Language) converter. To obtain benefits of the suggested approaches and design mechanisms in SMP2 standard as far as possible, the object-oriented and component-based design concepts were strictly chosen throughout a whole model development process.

  16. FoamVis, A Visualization System for Foam Research: Design and Implementation

    Directory of Open Access Journals (Sweden)

    Dan R. Lipsa

    2015-03-01

    Full Text Available Liquid foams are used in areas such as mineral separation, oil recovery, food and beverage production, sanitation and fire fighting. To improve the quality of products and the efficiency of processes in these areas, foam scientists wish to understand and control foam behaviour. To this end, foam scientists have used foam simulations to model foam behaviour; however, analysing these simulations presents difficult challenges. We describe the main foam research challenges and present the design of FoamVis, the only existing visualization, exploration and analysis application created to address them. We describe FoamVis’ main features, together with relevant design and implementation notes. Our goal is to provide a global overview and individual feature implementation details that would allow a visualization scientist to extend the FoamVis system with new algorithms and adapt it to new requirements. The result is a detailed presentation of the software that is not provided in previous visualization research papers.

  17. Shared Genetic Risk Factors of Intracranial, Abdominal, and Thoracic Aneurysms

    NARCIS (Netherlands)

    van 't Hof, Femke N G; Ruigrok, Ynte M; Lee, Cue Hyunkyu; Ripke, Stephan; Anderson, Graig; de Andrade, Mariza; Baas, Annette F; Blankensteijn, Jan D; Böttinger, Erwin P; Bown, Matthew J; Broderick, Joseph; Bijlenga, Philippe; Carrell, David S; Crawford, Dana C; Crosslin, David R; Ebeling, Christian; Eriksson, Johan G; Fornage, Myriam; Foroud, Tatiana; von Und Zu Fraunberg, Mikael; Friedrich, Christoph M; Gaál, Emília I; Gottesman, Omri; Guo, Dong-Chuan; Harrison, Seamus C; Hernesniemi, Juha; Hofman, Albert; Inoue, Ituro; Jääskeläinen, Juha E; Jones, Gregory T; Kiemeney, Lambertus A L M; Kivisaari, Riku; Ko, Nerissa; Koskinen, Seppo; Kubo, Michiaki; Kullo, Iftikhar J; Kuivaniemi, Helena; Kurki, Mitja I; Laakso, Aki; Lai, Dongbing; Leal, Suzanne M; Lehto, Hanna; LeMaire, Scott A; Low, Siew-Kee; Malinowski, Jennifer; McCarty, Catherine A; Milewicz, Dianna M; Mosley, Thomas H; Nakamura, Yusuke; Nakaoka, Hirofumi; Niemelä, Mika; Pacheco, Jennifer; Peissig, Peggy L; Pera, Joanna; Rasmussen-Torvik, Laura; Ritchie, Marylyn D; Rivadeneira, Fernando; van Rij, Andre M; Santos-Cortez, Regie Lyn P; Saratzis, Athanasios; Slowik, Agnieszka; Takahashi, Atsushi; Tromp, Gerard; Uitterlinden, André G; Verma, Shefali S; Vermeulen, Sita H; Wang, Gao T; Han, Buhm; Rinkel, Gabriël J E; de Bakker, Paul I W

    2016-01-01

    BACKGROUND: Intracranial aneurysms (IAs), abdominal aortic aneurysms (AAAs), and thoracic aortic aneurysms (TAAs) all have a familial predisposition. Given that aneurysm types are known to co-occur, we hypothesized that there may be shared genetic risk factors for IAs, AAAs, and TAAs. METHODS AND

  18. Shared genetic risk factors of intracranial, abdominal, and thoracic aneurysms

    NARCIS (Netherlands)

    van 't Hof, Femke N G; Ruigrok, Ynte M; Lee, Cue Hyunkyu; Ripke, Stephan; Anderson, Graig; de Andrade, Mariza; Baas, Annette F; Blankensteijn, Jan D; Böttinger, Erwin P; Bown, Matthew J; Broderick, Joseph; Bijlenga, Philippe; Carrell, David S; Crawford, Dana C; Crosslin, David R; Ebeling, Christian; Eriksson, Johan G; Fornage, Myriam; Foroud, Tatiana; von Und Zu Fraunberg, Mikael; Friedrich, Christoph M; Gaál, Emília I; Gottesman, Omri; Guo, Dong-Chuan; Harrison, Seamus C; Hernesniemi, Juha; Hofman, Albert; Inoue, Ituro; Jääskeläinen, Juha E; Jones, Gregory T; Kiemeney, Lambertus A L M; Kivisaari, Riku; Ko, Nerissa; Koskinen, Seppo; Kubo, Michiaki; Kullo, Iftikhar J; Kuivaniemi, Helena; Kurki, Mitja I; Laakso, Aki; Lai, Dongbing; Leal, Suzanne M; Lehto, Hanna; LeMaire, Scott A; Low, Siew-Kee; Malinowski, Jennifer; McCarty, Catherine A; Milewicz, Dianna M; Mosley, Thomas H; Nakamura, Yusuke; Nakaoka, Hirofumi; Niemelä, Mika; Pacheco, Jennifer; Peissig, Peggy L; Pera, Joanna; Rasmussen-Torvik, Laura; Ritchie, Marylyn D; Rivadeneira, Fernando; van Rij, Andre M; Santos-Cortez, Regie Lyn P; Saratzis, Athanasios; Slowik, Agnieszka; Takahashi, Atsushi; Tromp, Gerard; Uitterlinden, André G; Verma, Shefali S; Vermeulen, Sita H; Wang, Gao T; Han, Buhm; Rinkel, Gabriël J E; de Bakker, Paul I W

    2016-01-01

    Background--Intracranial aneurysms (IAs), abdominal aortic aneurysms (AAAs), and thoracic aortic aneurysms (TAAs) all have a familial predisposition. Given that aneurysm types are known to co-occur, we hypothesized that there may be shared genetic risk factors for IAs, AAAs, and TAAs. Methods and

  19. Familial Abdominal Aortic Aneurysm : Clinical Features and Genetics

    NARCIS (Netherlands)

    K.M. van de Luijtgaarden (Koen)

    2016-01-01

    markdownabstractAbstract Cardiovascular disease is the most important cause of death in the world and encompasses occlusive as well as aneurysmal disease. The most common aneurysm in humans is the abdominal aortic aneurysm (AAA). The question is why the aorta dilates in aneurysmal disease and

  20. Sound Velocity in Soap Foams

    International Nuclear Information System (INIS)

    Wu Gong-Tao; Lü Yong-Jun; Liu Peng-Fei; Li Yi-Ning; Shi Qing-Fan

    2012-01-01

    The velocity of sound in soap foams at high gas volume fractions is experimentally studied by using the time difference method. It is found that the sound velocities increase with increasing bubble diameter, and asymptotically approach to the value in air when the diameter is larger than 12.5 mm. We propose a simple theoretical model for the sound propagation in a disordered foam. In this model, the attenuation of a sound wave due to the scattering of the bubble wall is equivalently described as the effect of an additional length. This simplicity reasonably reproduces the sound velocity in foams and the predicted results are in good agreement with the experiments. Further measurements indicate that the increase of frequency markedly slows down the sound velocity, whereas the latter does not display a strong dependence on the solution concentration

  1. Intravascular volume after aneurysmal subarachnoid hemorrhage

    NARCIS (Netherlands)

    Hoff, R.G.

    2009-01-01

    Intravascular volume after aneurysmal subarachnoid hemorrhage A subarachnoid hemorrhage (SAH) from a ruptured cerebral aneurysm is a devastating disorder with an often poor prognosis. The occurrence of delayed cerebral ischemia (DCI) is one of the most important factors determining outcome in

  2. Coiling of ruptured pericallosal artery aneurysms.

    NARCIS (Netherlands)

    Menovsky, T.; Rooij, W.J.J. van; Sluzewski, M.; Wijnalda, D.

    2002-01-01

    OBJECTIVE: To assess the technical feasibility of treating ruptured pericallosal artery aneurysms with detachable coils and to evaluate the anatomic and clinical results. METHODS: Over a period of 27 months, 12 patients with a ruptured pericallosal artery aneurysm were treated with detachable

  3. The role of inflammation in cerebral aneurysms

    Directory of Open Access Journals (Sweden)

    Ali H Turkmani

    2015-06-01

    Full Text Available The natural history of unruptured intracranial aneurysms (IAs is poorly understood. At present, risk factors for aneurysm rupture are limited to demographics and rudimentary anatomic features of the aneurysm. The first sign of aneurysm destabilization and rupture may be subarachnoid hemorrhage, a potentially devastating brain injury with high morbidity and mortality. An emerging body of literature suggests a complex inflammatory cascade likely promotes aneurysm wall remodeling and progressive ballooning of the arterial wall, ultimately terminating in aneurysm rupture. These events likely begin with hemodynamic, flow-related endothelial injury; the injured endothelium stimulates inflammation, including the recruitment and transmigration of inflammatory cells, particularly macrophages. Various proteases are secreted by the inflammatory infiltrate, resulting in degradation of the extracellular matrix and the structural changes unique to IAs. Detailed understanding of these inflammatory processes may result in (1 early identification of patients at high risk for aneurysm rupture, perhaps via arterial wall imaging, and (2 targeted, noninvasive therapies to treat or even prevent cerebral aneurysms.

  4. Microneurosurgical management of anterior choroid artery aneurysms.

    Science.gov (United States)

    Lehecka, Martin; Dashti, Reza; Laakso, Aki; van Popta, Jouke S; Romani, Rossana; Navratil, Ondrej; Kivipelto, Leena; Kivisaari, Riku; Foroughi, Mansoor; Kokuzawa, Jouji; Lehto, Hanna; Niemelä, Mika; Rinne, Jaakko; Ronkainen, Antti; Koivisto, Timo; Jääskelainen, Juha E; Hernesniemi, Juha

    2010-05-01

    Anterior choroid artery aneurysms (AChAAs) constitute 2%-5% of all intracranial aneurysms. They are usually small, thin walled with one or several arteries originating at their base, and often associated with multiple aneurysms. In this article, we review the practical microsurgical anatomy, the preoperative imaging, surgical planning, and the microneurosurgical steps in the dissection and the clipping of AChAAs. This review, and the whole series on intracranial aneurysms (IAs), are mainly based on the personal microneurosurgical experience of the senior author (J.H.) in two Finnish centers (Helsinki and Kuopio) that serve, without patient selection, the catchment area in Southern and Eastern Finland. These two centers have treated more than 10,000 patients with IAs since 1951. In the Kuopio Cerebral Aneurysm Database of 3005 patients with 4253 IAs, 831 patients (28%) had altogether 980 internal carotid artery (ICA) aneurysms, of whom 95 patients had 99 (2%) AChAAs. Ruptured AChAAs, found in 39 patients (41%), with median size of 6 mm (range = 2-19 mm), were associated with intracerebral hematoma (ICH) in only 1 (3%) patient. Multiple aneurysms were seen in 58 (61%) patients. The main difficulty in microneurosurgical management of AChAAs is to preserve flow in the anterior choroid artery originating at the base and often attached to the aneurysm dome. This necessitates perfect surgical strategy based on preoperative knowledge of 3 dimensional angioarchitecture and proper orientation during the microsurgical dissection. Copyright © 2010 Elsevier Inc. All rights reserved.

  5. Spontaneous Retroperitoneal Hemorrhage from Adrenal Artery Aneurysm

    International Nuclear Information System (INIS)

    Gonzalez Valverde, F.M.; Balsalobre, M.; Torregrosa, N.; Molto, M.; Gomez Ramos, M.J.; Vazquez Rojas, J.L.

    2007-01-01

    Spontaneous adrenal hemorrhage is a very rare but serious disorder of the adrenal gland that can require emergent treatment. We report on a 42-year-old man who underwent selective angiography for diagnosis and treatment of retroperitoneal hemorrhage from small adrenal artery aneurysm. This case gives further details about the value of transluminal artery embolization in the management of visceral aneurysm rupture

  6. Aneurysmal bone cyst and other nonneoplastic conditions

    International Nuclear Information System (INIS)

    Dahlin, D.C.; McLeod, R.A.

    1982-01-01

    Aneurysmal bone cyst is a benign proliferative tumefaction of bone. Histologic similarities indicate a kinship among classic aneurysmal bone cysts, essentially 'solid' proliferative lesions in bones; giant cell reparative granulomas of the jaws, at the base of the skull, and in the small bones of the hands and feet; skeletal lesions of hyperparathyroidism; and even pseudosarcomatous myositis ossificans, proliferative myositis, and proliferative fasciitis. (orig.)

  7. Portal circulation aneurysms: two case reviews

    International Nuclear Information System (INIS)

    Perret, W. L.; Silva, A de.; Elzarka, A.; Schelleman, A.

    2007-01-01

    Venous aneurysms of the superior mesenteric vein and portal vein are an uncommon occurrence and often an incidental finding. They can also be associated with hepatocellular disease and portal hypertension. We present CT and ultrasound findings of these entities. The management of venous aneurysms is generally conservative with serial imaging

  8. Influence of the glass particle size on the foaming process and physical characteristics of foam glasses

    DEFF Research Database (Denmark)

    König, Jakob; Petersen, Rasmus Rosenlund; Yue, Yuanzheng

    2016-01-01

    We have prepared low-density foam glasses from cathode-ray-tube panel glass using carbon and MnO2 as the foaming agents. The effect of the glass particle size on the foaming process, the apparent density and the pore morphology is revealed. The results show that the foaming is mainly caused...... by the reduction of manganese. Foam glasses with a density of

  9. Modelling of Churn-Annular foam flows

    NARCIS (Netherlands)

    Westende, J.M.C. van 't; Shoeibi Omrani, P.; Vercauteren, F.F.; Nennie, E.D.

    2016-01-01

    Foam assisted lift is a deliquification method in the oil and gas industry, which aims to prevent or postpone countercurrent gas-liquid flow in maturing gas wells or to assist in removing downhole accumulated liquids. According to Nimwegen, who performed experiments with foam flows, foam

  10. Recycle Glass in Foam Glass Production

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Yue, Yuanzheng

    The foam glass industry turn recycle glass into heat insulating building materials. The foaming process is relative insensitive to impurities in the recycle glass. It is therefore considered to play an important role in future glass recycling. We show and discuss trends of use of recycled glasses...... in foam glass industry and the supply sources and capacity of recycle glass....

  11. Pipe Decontamination Involving String-Foam Circulation

    International Nuclear Information System (INIS)

    Turchet, J.P.; Estienne, G.; Fournel, B.

    2002-01-01

    Foam applications number for nuclear decontamination purposes has recently increased. The major advantage of foam decontamination is the reduction of secondary liquid wastes volumes. Among foam applications, we focus on foam circulation in contaminated equipment. Dynamic properties of the system ensures an homogeneous and rapid effect of the foam bed-drifted chemical reagents present in the liquid phase. This paper describes a new approach of foam decontamination for pipes. It is based on an alternated air and foam injections. We called it 'string-foam circulation'. A further reduction of liquid wastes is achieved compared to continuous foam. Secondly, total pressure loss along the pipe is controlled by the total foam length in the pipe. It is thus possible to clean longer pipes keeping the pressure under atmospheric pressure value. This ensures the non dispersion of contamination. This study describes experimental results obtained with a neutral foam as well with an acid foam on a 130 m long loop. Finally, the decontamination of a 44 meters pipe is presented. (authors)

  12. Idiopathic subvalvular aortic aneurysm masquerading as acute coronary syndrome.

    Science.gov (United States)

    Natarajan, Balaji; Ramanathan, Sundar; Subramaniam, Natarajan; Janardhanan, Rajesh

    2016-09-02

    Subvalvular aneurysms are the least common type of left ventricular (LV) aneurysms and can be fatal. Subaortic LV aneurysms are much rarer than submitral LV aneurysms and mostly reported in infancy. They can be congenital or acquired secondary to infections, cardiac surgery or trauma. Here, we report a unique presentation of a large, idiopathic subaortic aneurysm in an adult masquerading as an acute coronary syndrome. Diagnosis was made with the help of a CT aortography. Aneurysm was surgically resected with good results. This case highlights the clinical presentation and management of subaortic aneurysms, an important differential for congenital aortic malformations. 2016 BMJ Publishing Group Ltd.

  13. Models of experimental saccular aneurysms of carotid arteries in canine

    International Nuclear Information System (INIS)

    Zhang Haixia; Cheng Yingsheng; Li Minghua

    2006-01-01

    Objective: To study the availability by making experimental saccular aneurysm models of carotid arteries in canine similar to human intracranial aneurysms. Methods: Twenty healthy canines with experimental saccular side-wall aneurysms of carotid arteries were created successfully by surgery. Results: Forty experimental saccular side-wall aneurysms of carotid arteries were created successfully with 36 aneurysms and parent arteries maintaining patency with each other and four spontaneously occluded confirmed by angiography. Model successful rate reached 90%. Conclusions: Experimental saccular side-wall aneurysms of carotid arteries in canines were one of best models created for simulating human intracranial aneurysms. (authors)

  14. Endovascular Aneurysm Repair of Acute Occlusion of Abdominal Aortic Aneurysm with Intra-Aneurysmal Dissection.

    Science.gov (United States)

    Terai, Yasuhiko; Mitsuoka, Hiroshi; Nakai, Masanao; Goto, Shinnosuke; Miyano, Yuta; Tsuchiya, Hirokazu; Yamazaki, Fumio

    2015-11-01

    To report a rare case of acute abdominal aortic aneurysm (AAA) occlusion successfully treated by endovascular aneurysm repair (EVAR). An 89-year-old man complained of severe back pain and weakness in the bilateral lower extremities. Although there were neither acute ischemic signs on the brain computed tomography (CT) nor critical leg ischemia, the patient presented progressing weakness in the bilateral lower extremities and decreased sensation in the perianal and saddle area. Contrast-enhanced CT demonstrated an infrarenal AAA, the formation of an ulcer-like lesion in the aneurysmal wall, and the complete occlusion of distal AAA because of the caudal extension of intramural hematoma. Both common iliac arteries were patent because of the development of collateral vessels. The neurologic symptoms were considered to be caused by the occlusion of lumbar radicular arteries. EVAR seemed anatomically feasible, if the occlusion could be crossed by guidewires from both side of the common femoral artery. Wires easily traversed the occlusion, and the stent graft could be smoothly unwrapped and opened. The patient could recover decent iliac arterial flow. The neurovascular deficits recovered within 4 days after the procedure. Although our experience may not be reproduced in all case of AAA occlusion, EVAR warrants consideration to reduce the high mortality rate associated with the classical treatments. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Extracranial internal carotid artery aneurysm: case illustration

    Directory of Open Access Journals (Sweden)

    Zenteno Marco

    2017-12-01

    Full Text Available Extracranial internal carotid artery aneurysms (EICAA are uncommon lesion. These aneurysms can be classified as true or false aneurysms, atherosclerotic, dysplastic, infectious, posttraumatic and iatrogenic aneurysms. The most common presentation is central neurologic dysfunction, either a stroke or a transient ischemic attack. The rupture of these aneurysms can lead to severely impairment and can affect the quality of life of the patients or even may lead to death. Management of these lesions is required in most cases to prevent complications, however there is no treatment guideline or expert consensus for the management. We present a case of an unusual EICAA, associated with kinking of the affected vessel and review the literature.

  16. Computed tomographic diagnosis of pulmonary artery aneurysm

    International Nuclear Information System (INIS)

    Maeno, Kouji; Kontani, Kazuhiro; Ito, Makoto; Sakurai, Noboru; Sawada, Taisei; Fukeda, Yasuhiko; Takata, Shigeo; Ikeda, Takayuki; Hattori, Nobu.

    1986-01-01

    Pulmonary artery aneurysms are rare lesions. Clagett et al reported that one aneurysm of the pulmonary artery may be found in approximately 14,000 necropsies. We have experienced a case of giant pulmonary artery aneurysm confirmed by computed tomography. A 38 year-old man with atrial septal defect admitted to Kanazawa City Hospital. He had been pointed out of a right hilar mass when he was 26 years old. His complaint was bloody sputum and cough. Pulmonary angiography was not useful for the definite diagnosis because of its mural thrombi. Enhanced computed tomography showed a giant pulmonary artery aneurysm with a mural thrombi in its cavity. This shows that enhanced computed tomography is very useful for the diagnosis of a pulmonary artery aneurysm with a mural thrombi in its cavity. (author)

  17. Computed tomographic diagnosis of pulmonary artery aneurysm

    Energy Technology Data Exchange (ETDEWEB)

    Maeno, Kouji; Kontani, Kazuhiro; Ito, Makoto; Sakurai, Noboru; Sawada, Taisei; Fukeda, Yasuhiko; Takata, Shigeo; Ikeda, Takayuki; Hattori, Nobu

    1986-05-01

    Pulmonary artery aneurysms are rare lesions. Clagett et al reported that one aneurysm of the pulmonary artery may be found in approximately 14,000 necropsies. We have experienced a case of giant pulmonary artery aneurysm confirmed by computed tomography. A 38 year-old man with atrial septal defect admitted to Kanazawa City Hospital. He had been pointed out of a right hilar mass when he was 26 years old. His complaint was bloody sputum and cough. Pulmonary angiography was not useful for the definite diagnosis because of its mural thrombi. Enhanced computed tomography showed a giant pulmonary artery aneurysm with a mural thrombi in its cavity. This shows that enhanced computed tomography is very useful for the diagnosis of a pulmonary artery aneurysm with a mural thrombi in its cavity.

  18. Silicone foam for penetration seal

    International Nuclear Information System (INIS)

    Hoshino, Yoshikazu

    1986-01-01

    In nuclear power plants or general buildings, it is very important to form a fire-resistant seal around cables, cable trays and conduits passing through a wall or a floor. Rockwool, asbestos, glasswool and flame-retarded urethane foam have so far been used for these purposes. However, they were not satisfactory in sealing property, workability and safety. The silicone foam newly developed, ''TOSSEAL'' 300, has cleared these defects. It has now come to be used for fire resistant seal in nuclear power plants. (author)

  19. Heat exchanger using graphite foam

    Science.gov (United States)

    Campagna, Michael Joseph; Callas, James John

    2012-09-25

    A heat exchanger is disclosed. The heat exchanger may have an inlet configured to receive a first fluid and an outlet configured to discharge the first fluid. The heat exchanger may further have at least one passageway configured to conduct the first fluid from the inlet to the outlet. The at least one passageway may be composed of a graphite foam and a layer of graphite material on the exterior of the graphite foam. The layer of graphite material may form at least a partial barrier between the first fluid and a second fluid external to the at least one passageway.

  20. Advances in the imaging of cerebral aneurysm inflammation

    Directory of Open Access Journals (Sweden)

    Michael R Levitt

    2015-06-01

    Full Text Available Cerebral aneurysm formation, growth and rupture are thought to be the result of a complex interaction between cerebrovascular hemodynamics and pathobiology. Recently, new evidence has emerged regarding the role of inflammation in the walls of cerebral aneurysms. Noninvasive methods to characterize the degree of inflammation in aneurysms could enable clinicians to estimate the risk of future aneurysm growth and rupture, influencing treatment. This review examines emerging techniques of imaging inflammatory biomarkers in cerebral aneurysms.

  1. Application of Revasculization Technique in Aneurysm Surgery : Kyorin University Experience

    OpenAIRE

    栗田, 浩樹; 山口, 竜一; 池田, 俊貴; 原田, 洋一; 塩川, 芳昭; Hiroki, KURITA; Ryuichi, YAMAGUCHI; Toshiki, IKEDA; Youichi, HARADA; Yoshiaki, SHIOKAWA; 杏林大学医学部脳神経外科・脳卒中センター; 杏林大学医学部脳神経外科・脳卒中センター; 杏林大学医学部脳神経外科・脳卒中センター; 杏林大学医学部脳神経外科・脳卒中センター; 杏林大学医学部脳神経外科・脳卒中センター

    2008-01-01

    Between February 2004 and September 2005, revasculization technique was used in 10 patients with intracranial aneurysm to obliterate the aneurysm and to prevent ischemic complications. Five high-flow external carotid-internal carotid (EC-IC) bypasses with radial artery graft (EC-RA-M2) followed by proximal IC occlusion/trapping were used to obliterate unruptured IC-cavernous large/giant aneurysms and ruptured IC anterior wall aneurysms. One patient with ruptured VA-union dissecting aneurysm w...

  2. Paket Layanan Informasi Karir untuk Meningkatkan Pemahaman Studi Lanjut Siswa SMP

    Directory of Open Access Journals (Sweden)

    Jilvia Indyarti

    2014-12-01

    Full Text Available Tujuan penelitian ini yaitu  untuk mengetahui keefektifan paket layanan informasi karir berbasis multimedia dalam meningkatkan pemahaman studi lanjut. Jenis penelitian ini adalah penelitian eksperimen. Penelitian ini dilaksanakan di SMP Negeri 1 Majenang dengan sampel siswa kelas VIII. Alat pengumpulan data yang digunakan yaitu angket. Teknik analisis data menggunakan analisis deskriptif persentase dan analisis kuantitatif. Hasil analisis deskriptif persentase diperoleh hasil bahwa pemahaman studi lanjut siswa meningkat sebesar 64%. Analisis kuantitatif menunjukkan bahwa thitung>ttabel sehingga Ho ditolak dan Ha diterima. Berdasarkan hasil penelitian dapat disimpulkan bahwa pemahaman studi lanjut siswa dapat ditingkatkan melalui paket layanan informasi karir berbasis multimedia. The purpose of this study is to determine the effectiveness of packet-based multimedia information services career in improving the understanding of further studies. This research was conducted at SMP Negeri 1 Majenang with sample eighth grade students. Data collection tool used was a questionnaire. Analysis using descriptive analysis and quantitative analysis of the percentage. The results of the descriptive analysis of the percentage of obtained results that further students' understanding of the study increased by 64%. Quantitative analysis showed that tcount> ttable so Ho is rejected and Ha accepted. Based on the results of this study concluded that further study of student understanding can be improved through a packet-based multimedia information service career.

  3. POLA ASUH ORANG TUA, KONSEP DIRI, MOTIVASI DIRI, IKLIM SEKOLAH, DAN KESADARAN EMOSI SISWA SMP

    Directory of Open Access Journals (Sweden)

    Esther Heydemans

    2016-02-01

    Full Text Available Abstract: Patterns of Parenting, Self-concept, Self-motivation, School Climate, and Emotional Awareness of Students at State Junior High Schools. The study tries to investigate the correlation between patterns of foster parents, self concept, self motivation, school climate and emotional awareness of the students at State Junior High School in Malang. Using multiple regression analysis, it is concluded  that patterns of foster parents, self motivation, school climate have effective significant contribution to emotional awareness both individually and in groups. Meanwhile, self concept has no significant effect. As a whole the effective contribution of the patterns of foster parents, self concept, self motivation, school climate to emotional awareness is 0.57 or 57%, it means that the remaining 43% of emotional awareness cannot be explained. Abstrak: Pola Asuh Orang Tua, Konsep Diri, Motivasi Diri, Iklim Sekolah, dan Kesadaran Emosi Siswa SMP. Penelitian ini mencoba untuk menjelaskan hubungan antara pola asuh orang tua, konsep diri, motivasi diri, iklim sekolah dan kesadaran emosi siswa SMP Negeri di kota Malang. Dengan menggunakan analisis multiple regresi disimpulkan bahwa pola asuh orang tua, motivasi diri, dan iklim sekolah memberi kontribusi yang signifikan terhadap kesadaran emosi, baik secara individu dan kelompok. Sementara itu konsep diri mempunyai pengaruh, tetapi tidak signifikan. Secara keseluruhan kontribusi efektif dari pola asuh orang tua, konsep diri, motivasi diri, iklim sekolah terhadap kesdaran emosi adalah 0.57 (57%. Hal itu berarti bahwa ada 43% faktor lain yang mempengaruhi kesadaran emosi, tetapi tidak bisa dijelaskan.

  4. MENINGKATKAN PRESTASI BELAJAR SEJARAH SISWA SMP NEGERI 1 LIMPUNG MELALUI PEMANFAATAN SITUS BATANG KUNO

    Directory of Open Access Journals (Sweden)

    Butuk Buwang

    2011-10-01

    Full Text Available Batang regency has many historical sites, especially the classical heritage of Indonesia. Sites located at County Trunk can be used as an alternative source of learning for students of history. The purpose of this research is to find out how to improve school performance through the use of historical sites in the study of ancient trunk. This study uses classroom action research. Research carried out in SMP N 1 Limpung. The results showed that the use of stem sites through field trip activities can enhance learning achievement of history. This is prooven with an increase in each cycle until it reaches the complete study in cycle II.   Key words: learning achievement, history, sites of ancient Batang   Kabupaten Batang memiliki banyak situs sejarah, khususnya warisan klasik Indonesia. Situs yang terletak di Kabupaten Batang dapat digunakan sebagai alternatif sumber belajar bagi siswa sejarah. Tujuan dari penelitian ini adalah untuk mengetahui bagaimana memperbaiki kinerja sekolah melalui penggunaan situs sejarah dalam studi batang kuno. Penelitian ini menggunakan penelitian tindakan kelas. Penelitian yang dilakukan di SMP N 1 Limpung. Hasil penelitian menunjukkan bahwa penggunaan situs induk melalui kegiatan field trip dapat meningkatkan prestasi belajar sejarah. Hal ini dibuktikan dengan peningkatan pada setiap siklus sampai mencapai ketuntasan belajar pada siklus II.   Kata kunci: prestasi belajar, sejarah, situs Batang kuno  

  5. The SMP mobilizes a bright idea: a CSM cinema on wheels.

    Science.gov (United States)

    1985-01-01

    The Bangladesh Family Planning Social Marketing Project (SMP) provides 1 of the best examples of the use of the mass media to promote social marketing. Using a fleet of 7 vans and 1 motor launch, the SMP brings films about family planning to more than a million rural couples a month living in isolated villages. Each film unit has two 16 mm projectors, a generator, a screen and speaker system and is operated by a projectionist and an assistant. 1 mobile unit gives about 25 shows a month at a cost of $75US per show, or less than 2 cents per person. The message reels and advertising spots were produced in Bangladesh, and the musical numbers are taken from local feature films. Every 3-4 months, the vans switch message and musical films, but all units keep separate copies of the advertising spots for Raja and Panther condoms and Maya and Ovacon pills. The motivational films were developed through extensive research, and they address basic social issues. During the show, various promotional items are sold, including calendars with family planning messages, plastic bags, key rings, and contraceptives. According to Robert Ciszewski, executive director of Population Services International, these mobile films are making a profound social change in Bangladesh.

  6. EFEKTIVITAS PERAN KOPERASI SEKOLAH SEBAGAI UNIT PEMBELAJARAN KEWIRAUSAHAAN DI SMP NEGERI 1 KARANGANYAR KABUPATEN PEKALONGAN

    Directory of Open Access Journals (Sweden)

    Dea Prilia Sari

    2013-02-01

    Full Text Available Di SMP Negeri 1 Karanganyar Kabupaten Pekalongan, koperasi sekolah menyediakan jasa penjualan berbagai keperluan para siswa. Penelitian ini bertujuan mengetahui efektivitas peran koperasi sekolah sebagai unit pembelajaran kewirausahaan. Tipe penelitian yaitu kualitatif dengan proses analisis deskriptif evaluatif. Berdasarkan hasil analisis koperasi sekolah terbukti efektif sebagai pembelajaran kewirausahaan siswa tetapi masih mempunyai beberapa kendala. Kendala-Kendala yang dihadapi yaitu �waktu yang terbatas, tempat yang sempit dan modal juga sangat terbatas serta sifat personality yang beragam. Strategi yang digunakan yaitu membentuk tim guru pembina yang bertanggung jawab atas keberadan koperasi. � Abstract ___________________________________________________________________ In SMP Negeri 1 Karanganyar Pekalongan, cooperative schools provide students selling various purposes. this study aims to determine the effectiveness of� cooperative learning school as the unit of entrepreneurship. This type of research used is descriptive qualitative analysis process evaluative. Based on the analysis of school cooperatives proved to be effective as a learning entrepreneurship students but still have some problems. constraints faced by the limited time, the place is also very narrow and limited capital as well as diverse personality trait. the strategy used is to set up a teacher coach is responsible for the existence of cooperative

  7. KEEFEKTIFAN MODEL PEMBELAJARAN KOOPERATIF TIPE SQ3R TERHADAP KEMAMPUAN PEMECAHAN MASALAH SISWA SMP KELAS VII

    Directory of Open Access Journals (Sweden)

    Dian Teguh Firmansyah

    2012-10-01

    Full Text Available This study aims to determine the effectiveness of cooperative learning model types Survey Question Read Recite Review (SQ3R to mathematical problem solving abilities of students in the junior high school grade VII of material relationships between angles. The population in this study is students of grade VII SMP N 1 Pagerbarang school year 2011/2012. The samples taken by cluster random sampling technique so namely studentsinclassVIIB as control group and studentsinclass VIIC as experiment group. Design used in this research is true experimental design posttest only control type. Results showed that the averagetest scores mathematical problem solving abilities of students in class taught by cooperative learning model types SQ3Rof material relationships between angles achieve minimal completeness criteria(KKM applies in SMP N 1 Pagerbarang, with many students who achieve KKM is more than equal 75%, and average test scores mathematical problem solving abilities of students in classtaught by cooperative learning model typesSQ3Rof material relationships between anglesmore than the average test scoresmathematical problem solving abilities of students in class taught by expository model. Based on the research results can be concluded that the cooperative learning model types SQ3R is effective to improve students problem solving skills students grade VII to the material relationships between angles.

  8. Foam Transport in Porous Media - A Review

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z. F.; Freedman, Vicky L.; Zhong, Lirong

    2009-11-11

    Amendment solutions with or without surfactants have been used to remove contaminants from soil. However, it has drawbacks such that the amendment solution often mobilizes the plume, and its movement is controlled by gravity and preferential flow paths. Foam is an emulsion-like, two-phase system in which gas cells are dispersed in a liquid and separated by thin liquid films called lamellae. Potential advantages of using foams in sub-surface remediation include providing better control on the volume of fluids injected, uniformity of contact, and the ability to contain the migration of contaminant laden liquids. It is expected that foam can serve as a carrier of amendments for vadose zone remediation, e.g., at the Hanford Site. As part of the U.S. Department of Energy’s EM-20 program, a numerical simulation capability will be added to the Subsurface Transport Over Multiple Phases (STOMP) flow simulator. The primary purpose of this document is to review the modeling approaches of foam transport in porous media. However, as an aid to understanding the simulation approaches, some experiments under unsaturated conditions and the processes of foam transport are also reviewed. Foam may be formed when the surfactant concentration is above the critical micelle concentration. There are two main types of foams – the ball foam (microfoam) and the polyhedral foam. The characteristics of bulk foam are described by the properties such as foam quality, texture, stability, density, surface tension, disjoining pressure, etc. Foam has been used to flush contaminants such as metals, organics, and nonaqueous phase liquids from unsaturated soil. Ball foam, or colloidal gas aphrons, reportedly have been used for soil flushing in contaminated site remediation and was found to be more efficient than surfactant solutions on the basis of weight of contaminant removed per gram of surfactant. Experiments also indicate that the polyhedral foam can be used to enhance soil remediation. The

  9. Stretching and folding mechanism in foams

    International Nuclear Information System (INIS)

    Tufaile, Alberto; Pedrosa Biscaia Tufaile, Adriana

    2008-01-01

    We have described the stretching and folding of foams in a vertical Hele-Shaw cell containing air and a surfactant solution, from a sequence of upside-down flips. Besides the fractal dimension of the foam, we have observed the logistic growth for the soap film length. The stretching and folding mechanism is present during the foam formation, and this mechanism is observed even after the foam has reached its respective maximum fractal dimension. Observing the motion of bubbles inside the foam, large bubbles present power spectrum associated with random walk motion in both directions, while the small bubbles are scattered like balls in a Galton board

  10. Method of making a cyanate ester foam

    Science.gov (United States)

    Celina, Mathias C.; Giron, Nicholas Henry

    2014-08-05

    A cyanate ester resin mixture with at least one cyanate ester resin, an isocyanate foaming resin, other co-curatives such as polyol or epoxy compounds, a surfactant, and a catalyst/water can react to form a foaming resin that can be cured at a temperature greater than 50.degree. C. to form a cyanate ester foam. The cyanate ester foam can be heated to a temperature greater than 400.degree. C. in a non-oxidative atmosphere to provide a carbonaceous char foam.

  11. Stretching and folding mechanism in foams

    Energy Technology Data Exchange (ETDEWEB)

    Tufaile, Alberto [Escola de Artes, Ciencias e Humanidades, Soft Matter Laboratory, Universidade de Sao Paulo, 03828-000 Sao Paulo, SP (Brazil)], E-mail: tufaile@usp.br; Pedrosa Biscaia Tufaile, Adriana [Escola de Artes, Ciencias e Humanidades, Soft Matter Laboratory, Universidade de Sao Paulo, 03828-000 Sao Paulo, SP (Brazil)

    2008-10-13

    We have described the stretching and folding of foams in a vertical Hele-Shaw cell containing air and a surfactant solution, from a sequence of upside-down flips. Besides the fractal dimension of the foam, we have observed the logistic growth for the soap film length. The stretching and folding mechanism is present during the foam formation, and this mechanism is observed even after the foam has reached its respective maximum fractal dimension. Observing the motion of bubbles inside the foam, large bubbles present power spectrum associated with random walk motion in both directions, while the small bubbles are scattered like balls in a Galton board.

  12. Bio-based Polymer Foam from Soyoil

    Science.gov (United States)

    Bonnaillie, Laetitia M.; Wool, Richard P.

    2006-03-01

    The growing bio-based polymeric foam industry is presently lead by plant oil-based polyols for polyurethanes and starch foams. We developed a new resilient, thermosetting foam system with a bio-based content higher than 80%. The acrylated epoxidized soybean oil and its fatty acid monomers is foamed with pressurized carbon dioxide and cured with free-radical initiators. The foam structure and pore dynamics are highly dependent on the temperature, viscosity and extent of reaction. Low-temperature cure hinds the destructive pore coalescence and the application of a controlled vacuum results in foams with lower densities ˜ 0.1 g/cc, but larger cells. We analyze the physics of foam formation and stability, as well as the structure and mechanical properties of the cured foam using rigidity percolation theory. The parameters studied include temperature, vacuum applied, and cross-link density. Additives bring additional improvements: nucleating agents and surfactants help produce foams with a high concentration of small cells and low bulk density. Hard and soft thermosetting foams with a bio content superior to 80% are successfully produced and tested. Potential applications include foam-core composites for hurricane-resistant housing, structural reinforcement for windmill blades, and tissue scaffolds.

  13. Numerical Modeling of Foam Drilling Hydraulics

    Directory of Open Access Journals (Sweden)

    Ozcan Baris

    2007-12-01

    Full Text Available The use of foam as a drilling fluid was developed to meet a special set of conditions under which other common drilling fluids had failed. Foam drilling is defined as the process of making boreholes by utilizing foam as the circulating fluid. When compared with conventional drilling, underbalanced or foam drilling has several advantages. These advantages include: avoidance of lost circulation problems, minimizing damage to pay zones, higher penetration rates and bit life. Foams are usually characterized by the quality, the ratio of the volume of gas, and the total foam volume. Obtaining dependable pressure profiles for aerated (gasified fluids and foam is more difficult than for single phase fluids, since in the former ones the drilling mud contains a gas phase that is entrained within the fluid system. The primary goal of this study is to expand the knowledge-base of the hydrodynamic phenomena that occur in a foam drilling operation. In order to gain a better understanding of foam drilling operations, a hydrodynamic model is developed and run at different operating conditions. For this purpose, the flow of foam through the drilling system is modeled by invoking the basic principles of continuum mechanics and thermodynamics. The model was designed to allow gas and liquid flow at desired volumetric flow rates through the drillstring and annulus. Parametric studies are conducted in order to identify the most influential variables in the hydrodynamic modeling of foam flow.

  14. Foaming Glass Using High Pressure Sintering

    DEFF Research Database (Denmark)

    Østergaard, Martin Bonderup; Petersen, Rasmus Rosenlund; König, Jakob

    Foam glass is a high added value product which contributes to waste recycling and energy efficiency through heat insulation. The foaming can be initiated by a chemical or physical process. Chemical foaming with aid of a foaming agent is the dominant industrial process. Physical foaming has two...... to expand. After heat-treatment foam glass can be obtained with porosities of 80–90 %. In this study we conduct physical foaming of cathode ray tube (CRT) panel glass by sintering under high pressure (5-25 MPa) using helium, nitrogen, or argon at 640 °C (~108 Pa s). Reheating a sample in a heating...... variations. One way is by saturation of glass melts with gas. The other involves sintering of powdered glass under a high gas pressure resulting in glass pellets with high pressure bubbles entrapped. Reheating the glass pellets above the glass transition temperature under ambient pressure allows the bubbles...

  15. Viscous Control of the Foam Glass Process

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Smedskjær, Morten Mattrup

    The production of foam glass as heat insulating material is an important industrial process because it enables low-cost recycling of glass waste from a variety of chemical compositions. Optimization of the foaming process of new glass waste compositions is time consuming, since many factors affect...... the foaming process such as temperature, particle size, type and concentration of foaming agent. The foaming temperature is one of the key factors, because even small temperature changes can affect the melt viscosity by several orders of magnitude. Therefore, it is important to establish the viscosity range...... in which the foaming process should take place, particularly when the type of recycled cullet is changed or several types of cullet are mixed in one batch. According to recent glass literature, the foaming process should occur at viscosity 103 to 105 Pa s. However, no systematic studies have hitherto been...

  16. Positivity of spin foam amplitudes

    International Nuclear Information System (INIS)

    Baez, John C; Christensen, J Daniel

    2002-01-01

    The amplitude for a spin foam in the Barrett-Crane model of Riemannian quantum gravity is given as a product over its vertices, edges and faces, with one factor of the Riemannian 10j symbols appearing for each vertex, and simpler factors for the edges and faces. We prove that these amplitudes are always nonnegative for closed spin foams. As a corollary, all open spin foams going between a fixed pair of spin networks have real amplitudes of the same sign. This means one can use the Metropolis algorithm to compute expectation values of observables in the Riemannian Barrett-Crane model, as in statistical mechanics, even though this theory is based on a real-time (e iS ) rather than imaginary-time e -S path integral. Our proof uses the fact that when the Riemannian 10j symbols are nonzero, their sign is positive or negative depending on whether the sum of the ten spins is an integer or half-integer. For the product of 10j symbols appearing in the amplitude for a closed spin foam, these signs cancel. We conclude with some numerical evidence suggesting that the Lorentzian 10j symbols are always nonnegative, which would imply similar results for the Lorentzian Barrett-Crane model

  17. "Grinding" cavities in polyurethane foam

    Science.gov (United States)

    Brower, J. R.; Davey, R. E.; Dixon, W. F.; Robb, P. H.; Zebus, P. P.

    1980-01-01

    Grinding tool installed on conventional milling machine cuts precise cavities in foam blocks. Method is well suited for prototype or midsize production runs and can be adapted to computer control for mass production. Method saves time and materials compared to bonding or hot wire techniques.

  18. Influence of foaming agents on solid thermal conductivity of foam glasses prepared from CRT panel glass

    DEFF Research Database (Denmark)

    Østergaard, Martin Bonderup; Petersen, Rasmus Rosenlund; König, Jakob

    2017-01-01

    The understanding of the thermal transport mechanism of foam glass is still lacking. The contribution of solid- and gas conduction to the total thermal conductivity remains to be reported. In many foam glasses, the solid phase consist of a mix of an amorphous and a crystalline part where foaming...... containing glass and crystalline foaming agents and amorphous samples where the foaming agents are completely dissolved in the glass structure, respectively. Results show that the samples prepared by sintering have a higher thermal conductivity than the samples prepared by melt-quenching. The thermal...... conductivities of the sintered and the melt-quenched samples represent an upper and lower limit of the solid phase thermal conductivity of foam glasses prepared with these foaming agents. The content of foaming agents dissolved in the glass structure has a major impact on the solid thermal conductivity of foam...

  19. Electronic database of arterial aneurysms

    Directory of Open Access Journals (Sweden)

    Fabiano Luiz Erzinger

    2014-12-01

    Full Text Available Background:The creation of an electronic database facilitates the storage of information, as well as streamlines the exchange of data, making easier the exchange of knowledge for future research.Objective:To construct an electronic database containing comprehensive and up-to-date clinical and surgical data on the most common arterial aneurysms, to help advance scientific research.Methods:The most important specialist textbooks and articles found in journals and on internet databases were reviewed in order to define the basic structure of the protocol. Data were computerized using the SINPE© system for integrated electronic protocols and tested in a pilot study.Results:The data entered onto the system was first used to create a Master protocol, organized into a structure of top-level directories covering a large proportion of the content on vascular diseases as follows: patient history; physical examination; supplementary tests and examinations; diagnosis; treatment; and clinical course. By selecting items from the Master protocol, Specific protocols were then created for the 22 arterial sites most often involved by aneurysms. The program provides a method for collection of data on patients including clinical characteristics (patient history and physical examination, supplementary tests and examinations, treatments received and follow-up care after treatment. Any information of interest on these patients that is contained in the protocol can then be used to query the database and select data for studies.Conclusions:It proved possible to construct a database of clinical and surgical data on the arterial aneurysms of greatest interest and, by adapting the data to specific software, the database was integrated into the SINPE© system, thereby providing a standardized method for collection of data on these patients and tools for retrieving this information in an organized manner for use in scientific studies.

  20. The effect of endoleak on intra-aneurysmal pressure after EVE for abdominal aortic aneurysm

    International Nuclear Information System (INIS)

    Huang Sheng; Jing Zaiping; Mei Zhijun; Lu Qingsheng; Zhao Jun; Zhang Suzhen; Zhao Xin; Cai Lili; Tang Jingdong; Xiong Jiang; Liao Mingfang

    2003-01-01

    Objective: To investigate the intra-aneurysmal pressure curve in the presence of endoleak after endovascular exclusion (EVE) for abdominal aortic aneurysm (AAA). Methods: Infrarenal aortic aneurysms were created with bovine jugular vein segments or patches. Then they were underwent incomplete endovascular exclusion of the aneurysm and formation of endoleaks. The pressures of blood flow outside the graft into the sac were measured. Results: The intrasac pressure was higher than systemic pressure in the presence of endoleak. After sealing the endoleak, pressure decreased significantly, and the pressure cure showed approximately linear. Conclusion: The change of intra-aneurysmal pressure curve reflected the load on aneurysmal wall after EVE, and can also help to determine the endoleak existence

  1. Rasmussen's Aneurysm: A Forgotten Entity?

    International Nuclear Information System (INIS)

    Keeling, A. N.; Costello, R.; Lee, M. J.

    2008-01-01

    We present the case of a rare entity which is a complication of a disease process that had almost disappeared from the Western World. With the recent resurgence in reported cases of Mycobacterium tuberculosis (TB) in Western communities, it is important to recognize complications and sequelae. A young alcoholic male with confirmed active TB suffered a cardiac arrest following massive haemoptysis. Multidetector computed tomography angiography diagnosed a Rasmussen's aneurysm, confirmed by digital subtraction angiography and then successfully embolized with glue. We outline this rare case and the embolization technique and review previously documented reports

  2. Aneurysm of the membranous septum

    Energy Technology Data Exchange (ETDEWEB)

    Goebel, N; Haller, D; Hinterauer, L; Jenni, R

    1984-02-01

    Amongst 9000 patients on whom angiocardiograms has been carried out, a membranous septum aneurysm (MSA) was found in 47. In nine patients out of 27 the MSA could be demonstrated by sonography. The most common abnormalities accompanying this lesion were disturbances in rhythm and conduction (in 29 patients), ventricular septal defect in 29 and aortic insufficiency in 14. Complications included bacterial endocarditis in five patients (three with aortic insufficiency and two with sepsis lenta), aortic insufficiency (which was not of rheumatic or bacterial origin in three patients with conduction defects) and thirteen patients with abnormalities of cardiac rhythm with small VSDs.

  3. Aneurysm of the membranous septum

    International Nuclear Information System (INIS)

    Goebel, N.; Haller, D.; Hinterauer, L.; Jenni, R.; Zurich Univ.

    1984-01-01

    Amongst 9000 patients on whom angiocardiograms has been carried out, a membranous septum aneurysm (MSA) was found in 47. In nine patients out of 27 the MSA could be demonstrated by sonography. The most common abnormalities accompanying this lesion were disturbances in rhythm and conduction (in 29 patients), ventricular septal defect in 29 and aortic insufficiency in 14. Complications included bacterial endocarditis in five patients (three with aortic insufficiency and two with sepsis lenta), aortic insufficiency (which was not of rheumatic or bacterial origin in three patients with conduction defects) and thirteen patients with abnormalities of cardiac rhythm with small VSDs. (orig.) [de

  4. The SmpB C-terminal tail helps tmRNA to recognize and enter stalled ribosomes

    Directory of Open Access Journals (Sweden)

    Mickey R. Miller

    2014-09-01

    Full Text Available In bacteria, transfer-messenger RNA (tmRNA and SmpB comprise the most common and effective system for rescuing stalled ribosomes. Ribosomes stall on mRNA transcripts lacking stop codons and are rescued as the defective mRNA is swapped for the tmRNA template in a process known as trans-translation. The tmRNA–SmpB complex is recruited to the ribosome independent of a codon–anticodon interaction. Given that the ribosome uses robust discriminatory mechanisms to select against non-cognate tRNAs during canonical decoding, it has been hard to explain how this can happen. Recent structural and biochemical studies show that SmpB licenses tmRNA entry through its interactions with the decoding center and mRNA channel. In particular, the C-terminal tail of SmpB promotes both EFTu activation and accommodation of tmRNA, the former through interactions with 16S rRNA nucleotide G530 and the latter through interactions with the mRNA channel downstream of the A site. Here we present a detailed model of the earliest steps in trans-translation, and in light of these mechanistic considerations, revisit the question of how tmRNA preferentially reacts with stalled, non-translating ribosomes.

  5. SURVEI SARANA DAN PRASARANA PENJASORKES DI SMP NEGERI SE- KECAMATAN PURWAREJA KLAMPOK KABUPATEN BANJARNEGARA TAHUN AJARAN 2012/ 2013

    Directory of Open Access Journals (Sweden)

    Lukman Baharuddin

    2015-04-01

    Full Text Available This research intent to know condition of medium and prasarana is sport and health physical education at SMP Country one Purwareja Klampok's district Banjarnegara's Regency school year 2012 / 2013. Method that is utilized in this research is quantitative. Approaching that is utilized gets analisis's descriptive character. This observational type is observational survey. This observational population is all SMP Country One Purwareja Klampok's district that total 3 schools . Sample took by samplings totaled tech and result sample as much 3 SMP. Methodic data collecting that digunkan is methodic questionnaire or kuesioner, observation method, method documents, and interview's method. Base observational result to be known that medium average and prasarana for branch sporting athletic with presentase 65.04%, basketball (44.00%, football (54.76%, for volleyball (53.57%, badminton (73.91%, gymnastics (50.00%, school health (55.34%.Of research and study result gets to be concluded that medium and prasarana penjasorkes at SMP Country One Purwareja Klampok's district Banjarnegara's regency adequately is equal to Penjasorkes's learning.

  6. Complications of endovascular treatment of cerebral aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Orrù, Emanuele, E-mail: surgeon.ema@gmail.com [Neuroradiology Department, Padua University Hospital, Via Giustiniani 2, Padua 35128 (Italy); Roccatagliata, Luca, E-mail: lroccatagliata@neurologia.unige.it [Neuroradiology Department, IRCCS San Martino University Hospital and IST, Largo Rosanna Benzi 10, Genoa 16132 (Italy); Department of Health Sciences (DISSAL), University of Genoa (Italy); Cester, Giacomo, E-mail: giacomo.cester@sanita.padova.it [Neuroradiology Department, Padua University Hospital, Via Giustiniani 2, Padua 35128 (Italy); Causin, Francesco, E-mail: francesco.causin@sanita.padova.it [Neuroradiology Department, Padua University Hospital, Via Giustiniani 2, Padua 35128 (Italy); Castellan, Lucio, E-mail: lucio.castellan@hsanmartino.it [Neuroradiology Department, IRCCS San Martino University Hospital and IST, Largo Rosanna Benzi 10, Genoa 16132 (Italy)

    2013-10-01

    The number of neuroendovascular treatments of both ruptured and unruptured aneurysms has increased substantially in the last two decades. Complications of endovascular treatments of cerebral aneurysms are rare but can potentially lead to acute worsening of the neurological status, to new neurological deficits or death. Some of the possible complications, such as vascular access site complications or systemic side effects associated with contrast medium (e.g. contrast medium allergy, contrast induced nephropathy) can also be encountered in diagnostic angiography. The most common complications of endovascular treatment of cerebral aneurysms are related to acute thromboembolic events and perforation of the aneurysm. Overall, the reported rate of thromboembolic complications ranges between 4.7% and 12.5% while the rate of intraprocedural rupture of cerebral aneurysms is about 0.7% in patients with unruptured aneurysms and about 4.1% in patients with previously ruptured aneurysms. Thromboembolic and hemorrhagic complications may occur during different phases of endovascular procedures and are related to different technical, clinical and anatomic reasons. A thorough knowledge of the different aspects of these complications can reduce the risk of their occurrence and minimize their clinical sequelae. A deep understanding of complications and of their management is thus part of the best standard of care.

  7. de novo'' aneurysms following endovascular procedures

    International Nuclear Information System (INIS)

    Briganti, F.; Cirillo, S.; Caranci, F.; Esposito, F.; Maiuri, F.

    2002-01-01

    Two personal cases of ''de novo'' aneurysms of the anterior communicating artery (ACoA) occurring 9 and 4 years, respectively, after endovascular carotid occlusion are described. A review of the 30 reported cases (including our own two) of ''de novo'' aneurysms after occlusion of the major cerebral vessels has shown some features, including a rather long time interval after the endovascular procedure of up to 20-25 years (average 9.6 years), a preferential ACoA (36.3%) and internal carotid artery-posterior communicating artery (ICA-PCoA) (33.3%) location of the ''de novo'' aneurysms, and a 10% rate of multiple aneurysms. These data are compared with those of the group of reported spontaneous ''de novo'' aneurysms after SAH or previous aneurysm clipping. We agree that the frequency of ''de novo'' aneurysms after major-vessel occlusion (two among ten procedures in our series, or 20%) is higher than commonly reported (0 to 11%). For this reason, we suggest that patients who have been submitted to endovascular major-vessel occlusion be followed up for up to 20-25 years after the procedure, using non-invasive imaging studies such as MR angiography and high-resolution CT angiography. On the other hand, periodic digital angiography has a questionable risk-benefit ratio; it may be used when a ''de novo'' aneurysm is detected or suspected on non-invasive studies. The progressive enlargement of the ACoA after carotid occlusion, as described in our case 1, must be considered a radiological finding of risk for ''de novo'' aneurysm formation. (orig.)

  8. Treatment strategy for ruptured abdominal aortic aneurysms.

    Science.gov (United States)

    Davidovic, L

    2014-07-01

    Rupture is the most serious and lethal complication of the abdominal aortic aneurysm. Despite all improvements during the past 50 years, ruptured abdominal aortic aneurysms are still associated with very high mortality. Namely, including patients who die before reaching the hospital, the mortality rate due to abdominal aortic aneurysm rupture is 90%. On the other hand, during the last twenty years, the number of abdominal aortic aneurysms significantly increased. One of the reasons is the fact that in majority of countries the general population is older nowadays. Due to this, the number of degenerative AAA is increasing. This is also the case for patients with abdominal aortic aneurysm rupture. Age must not be the reason of a treatment refusal. Optimal therapeutic option ought to be found. The following article is based on literature analysis including current guidelines but also on my Clinics significant experience. Furthermore, this article show cases options for vascular medicine in undeveloped countries that can not apply endovascular procedures at a sufficient level and to a sufficient extent. At this moment the following is evident. Thirty-day-mortality after repair of ruptured abdominal aortic aneurysms is significantly lower in high-volume hospitals. Due to different reasons all ruptured abdominal aortic aneurysms are not suitable for EVAR. Open repair of ruptured abdominal aortic aneurysm should be performed by experienced open vascular surgeons. This could also be said for the treatment of endovascular complications that require open surgical conversion. There is no ideal procedure for the treatment of AAA. Each has its own advantages and disadvantages, its own limits and complications, as well as indications and contraindications. Future reductions in mortality of ruptured abdominal aortic aneurysms will depend on implementation of population-based screening; on strategies to prevent postoperative organ injury and also on new medical technology

  9. Advances in open microsurgery for cerebral aneurysms.

    Science.gov (United States)

    Davies, Jason M; Lawton, Michael T

    2014-02-01

    Endovascular techniques introduced strong extrinsic forces that provoked reactive changes in aneurysm surgery. Microsurgery has become less invasive, more appealing to patients, lower risk, and efficacious for complex aneurysms, particularly those unfavorable for or failing endovascular therapy. To review specific advances in open microsurgery for aneurysms. A university-based, single-surgeon practice was examined for the use of minimally invasive craniotomies, surgical management of recurrence after coiling, the use of intracranial-intracranial bypass techniques, and cerebrovascular volume-outcome relationships. The mini-pterional, lateral supraorbital, and orbital-pterional craniotomies are minimally invasive alternatives to standard craniotomies. Mini-pterional and lateral supraorbital craniotomies were used in one-fourth of unruptured patients, increasing from 22% to 28%, whereas 15% of patients underwent orbital-pterional craniotomies and trended upward from 11% to 20%. Seventy-four patients were treated for coil recurrences (2.3% of all aneurysms) with direct clip occlusion (77%), clip occlusion after coil extraction (7%), or parent artery occlusion with bypass (16%). Intracranial-intracranial bypass (in situ bypass, reimplantation, reanastomosis, and intracranial grafts) transformed the management of giant aneurysms and made the surgical treatment of posterior inferior cerebellar artery aneurysms competitive with endovascular therapy. Centralization maximized the volume-outcome relationships observed with clipping. Aneurysm microsurgery has embraced minimalism, tailoring the exposure to the patient's anatomy with the smallest possible craniotomy that provides adequate exposure. The development of intracranial-intracranial bypasses is an important advancement that makes microsurgery a competitive option for complex and recurrent aneurysms. Trends toward centralizing aneurysm surgery in tertiary centers optimize results achievable with open microsurgery.

  10. Nuclear medical diagnostic with ventricular aneurysm

    International Nuclear Information System (INIS)

    Litter, H.

    1987-01-01

    In the diagnostic of ventricular aneurysms myocardial scintigraphy and above all radionuclide ventriculography (RNV) have special importance. Because of the non-invasive method and the as a result safe and easy use even with stress studies, RNV can provide a very valuable aid with aneurysm patients in early diagnosis, evaluation of the operability and as well as in the prognosis. It must be noted, however, that the differentiation of multivascular diseases and sometimes ventricular aneurysms can be difficult and the inclusion of an angiocardiograph as a radiological invasive examination procedure seems fitting. (orig./MG) [de

  11. Current management of inguinal false aneurysms

    DEFF Research Database (Denmark)

    Houlind, Kim; Jepsen, Jørn M; Saicu, Cristian

    2017-01-01

    False aneurysms are formed as a result of bleeding causing a hematoma to compress the surrounding tissue. The majority of false aneurysms presenting to the vascular surgeon are caused by iatrogenic injury to an artery. Although anastomotic failure occurs, a much higher number is caused by bleeding...... vessels. endovascular treatment with coils or covered stent grafts have proven useful in infected ilio-femoral false aneurysms. Open surgical repair may be the best treatment in the setting of imminent rupture, massive haematoma and skin necrosis. We present three patient cases treated with open surgery...

  12. False iliac artery aneurysm following renal transplantation

    DEFF Research Database (Denmark)

    Levi, N; Sønksen, Jens Otto Reimers; Schroeder, T V

    1999-01-01

    We report a very rare case of a false iliac artery aneurysm following renal transplantation. The patient was a 51-year-old women who presented with a painful 10 x 10 cm pulsating mass in her left iliac fossa. The patient had received a second cadaveric renal transplantation 5 years previously....... The graft never functioned and transplant nephrectomy was performed 2 weeks later. A CT-scanning showed a 10 x 10 cm large aneurysm arising from the left external iliac artery. At operation a large false aneurysm was identified arising from the original transplant anastomotic site. Due to the extent...

  13. Clinical and Radiographic Outcomes After Submuscular Plating (SMP) of Pediatric Femoral Shaft Fractures.

    Science.gov (United States)

    Stoneback, Jason W; Carry, Patrick M; Flynn, Katherine; Pan, Zhaoxing; Sink, Ernest L; Miller, Nancy H

    2018-03-01

    To evaluate lower extremity strength and alignment among children who underwent submuscular plating (SMP). Subjects who underwent SMP for a length unstable femoral fracture returned for isokinetic strength testing ≥2 years after surgery. Extensor and flexor strength deficits (percent difference) between the operative and nonoperative limbs were evaluated. Radiographic measurements of mechanical alignment [anatomic lateral distal femoral angle (aLDFA)] and qualitative measurements (The Pediatric Outcomes Data Collection Instrument, PODCI) were obtained from all subjects. The upper 97.5% confidence interval approach to establishing clinical equivalency was utilized to compare differences in strength and alignment between the operative and nonoperative limbs. An extensor strength deficit of >19% and an aLDFA discrepancy of >5 degrees were considered to be clinically significant. The average age at surgery of the 10 subjects included in the study was 8.7 years. The hardware was placed an average of 27.9 mm from the distal femoral physis and was removed 6.4 months postsurgery. Among all subjects, the median PODCI scores were ≥97 according to all subscales. There was no significant difference in extension torque between the operative versus nonoperative limbs at 60 degrees/s (P=0.5400), 120 degrees/s (P=0.4214), or 180 degrees/s (P=0.8166). More importantly, extension strength deficits between the operative and nonoperative limbs were not clinically significant at 60 degrees/s [upper 97.5% confidence interval (CI), 10.9%], 120 degrees/s (upper 97.5% CI, 11.0%), or 180 degrees/s (upper 97.5% CI, 10.7%). The difference in aLDFA between the operative and nonoperative limb was less than the predefined clinically significant threshold of 5 degrees for all subjects. SMP achieves satisfactory clinical and functional results. In this series, extensor strength deficits and/or lower extremity malalignment were not clinically meaningful. High patient satisfaction can be

  14. PENINGKATAN KUALITAS PEMBELAJARAN PPKN MELALUI PENERAPAN PROBLEM BASED LEARNING DI SMP

    Directory of Open Access Journals (Sweden)

    Y. Yuniwati

    2016-12-01

    Full Text Available Penelitian ini bertujuan untuk meningkatkan kualitas pembelajaran PPKn melalui penerapan model  Problem based learning di kelas VIII A semester 1 SMP Negeri 2 Manisrenggo Kabupaten Klaten tahun akademik 2014/2015. Penelitian ini merupakan penelitian tindakan kelas (classroom action research dengan desain Kemmis & Taggart yang dilaksanakan dalam III siklus. Jenis tindakan yang dilaksanakan adalah penerapan model Problem based learning dalam pembelajaran PPKn.  Langkah-langkah pembelajaran meliputi mengidentifikasi masalah, menggali sumber informasi yang relevan, belajar secara mandiri, menyelidiki dan menginterpretasi data yang terkumpul, memilih beberapa alternatif solusi masalah, dengan mempertimbangkan pendapat atau informasi dari kolabolator. Pengumpulan data dilakukan melalui observasi, tes tertulis, wawancara, dan catatan lapangan. Analisis data dilakukan secara kualitatif dengan teknik yang dikembangkan Miles dan Huberman. Hasil penelitian menunjukan bahwa penerapan model Problem based learning dapat meningkatkan kualitas pembelajaran PPKn pada aspek proses pembelajaran dan hasil belajar yang komprehensif (kognitif, afektif, dan psikomotorik.   THE IMPROVEMENT OF THE CIVIV EDUCATION LEARNING QUALITY THROUGH THE APPLICATION OF THE PROBLEM BASED–LEARNING  AT SMP Abstract This study aimed to improve the Civic Education learning quality through the application of the problem- based learning model at Grade VIII A of SMP Negeri 2 Manisrenggo in semester 1 of the 2014/2015 academic year. This was a classroom action research (CAR study employing the design by Kemmis & MacTaggart, carried out in three cycles. The action implemented was the application of the problembased learning model in the Civic Education learning. The learning steps included identifying problems, looking for relevant information sources, learning autonomously, investigating and interpreting the collected data, and selecting several alternative problem solutions by taking

  15. KEEFEKTIFAN PENDEKATAN OPEN-ENDED DAN PROBLEM SOLVING PADA PEMBELAJARAN BANGUN RUANG SISI DATAR DI SMP

    Directory of Open Access Journals (Sweden)

    Nuning Melianingsih

    2015-11-01

    Full Text Available Penelitian ini bertujuan untuk menentukan keefektifan dan perbandingan keefektifan dari pendekatan open-ended dan problem solving pada pembelajaran bangun ruang sisi datar ditinjau dari pencapaian kemampuan penalaran, pemecahan masalah, dan komunikasi matematis. Penelitian ini adalah quasi experiment dengan desain pretest-posttest nonequivalent group design. Populasi penelitian mencakup seluruh siswa kelas VIII SMP Negeri 1 Pandak, Bantul, Yogyakarta. Selanjutnya dengan memilih secara acak dari keseluruhan kelas tersebut, terpilih kelas VIII F dan VIII G sebagai sampel penelitian. Untuk menguji keefektifan masing-masing pendekatan pembelajaran digunakan uji one sample t-test. Untuk menguji bahwa pendekatan open-ended lebih efektif daripada pendekatan problem solving, data dianalisis menggunakan MANOVA yang dilanjutkan dengan uji t-Bonferroni. Hasil penelitian menunjukkan bahwa kedua pendekatan pembelajaran efektif ditinjau dari masing-masing aspek, dan pendekatan open-ended lebih efektif daripada pendekatan problem solving pada pembelajaran bangun ruang sisi datar ditinjau dari pencapaian kemampuan penalaran, pemecahan masalah, dan komunikasi matematis di SMP. Kata Kunci: pendekatan open-ended, pendekatan problem solving, kemampuan penalaran, kemampuan pemecahan masalah, kemampuan komunikasi matematis   THE EFFECTIVENESS OF OPEN-ENDED AND PROBLEM SOLVING APPROACH IN MATTER OF FLAT SIDE CONSTRUCT IN JUNIOR HIGH SCHOOL Abstract The aims of this research are to decide the effectiveness and the comparison of the effectiveness of open-ended and problem solving approach toward matter of flat side construct lesson viewed from achivement of reasoning ability, problem solving and mathematics communication. This study was a quasi experimental study using the pretest-posttest nonequivalent group design. The research population covered the entire VIII class students’ of SMP Negeri 1 Pandak, Bantul, Yogyakarta. From the population, classes of VIII F and

  16. PENERAPAN METODE MIND MAPPING (PETA PIKIRAN UNTUK MENINGKATKAN KEMAMPUAN BERPIKIR KREATIF MATEMATIK SISWA SMP

    Directory of Open Access Journals (Sweden)

    Rijal Darusman

    2014-09-01

    Full Text Available ABSTRAK Masalah yang melatar belakangi penelitian ini adalah masih rendahnya kemampuan berpikir kreatif matematik siswa Sekolah Menengah Pertama (SMP, sehingga diperlukan metode pembelajaran untuk mengatasi masalah tersebut. Metode yang diterapkan adalah Metode Mind Mapping, dikarenakan dengan metode pembelajaran mind mapping kemampuan berpikir kreatif matematik siswa  lebih baik jika dibandingkan dengan metode pembelajaran biasa.Berdasarkan latar belakang tersebut maka penelitian ini bertujuan untuk mengetahui apakah kemampuan berpikir kreatif matematik siswa yang pembelajarannya menggunakan metode mind mapping lebih baik daripada siswa yang pembelajarannya biasa. Penelitian ini merupakan kuasi eksperimen berbentuk kelompok kontrol pretes-postes, dengan perlakuan metode pembelajaran mind mapping dan pembelajaran biasa (konvensional. Pengumpulan data dalam penelitian ini berupa tes uraian sebanyak 4 soal, kemudian data skor kemampuan berpikir kreatif matematik siswa tersebut dianalisis dengan statistik deskriptif dan inferensial dengan menggunakan uji perbedaan dua rata-rata. Berdasarkan hasil analisis data diperoleh kesimpulan bahwa peningkatan kemampuan berpikir kreatif matematik siswa SMP yang pembelajarannya menggunakan metode mind mapping lebih baik daripada cara biasa.  Kata Kunci    : Berpikir Kreatif Matematik, Mind Mapping   ABSTRACT The problem of the background of this research is still low ability to think creatively mathematical school students (SMP, so that the necessary learning methods to overcome these problems. The method applied is Mind Mapping method, because the mind mapping method of learning mathematics students' creative thinking ability is better when compared to the learning method biasa.Berdasarkan this background, this study aims to determine whether the ability of creative thinking of students learning mathematics using mind mapping better than the usual student learning. This research is a form of quasi

  17. Molecular Characterization of a Novel Family of Trypanosoma cruzi Surface Membrane Proteins (TcSMP) Involved in Mammalian Host Cell Invasion.

    Science.gov (United States)

    Martins, Nadini Oliveira; Souza, Renata Torres de; Cordero, Esteban Mauricio; Maldonado, Danielle Cortez; Cortez, Cristian; Marini, Marjorie Mendes; Ferreira, Eden Ramalho; Bayer-Santos, Ethel; Almeida, Igor Correia de; Yoshida, Nobuko; Silveira, José Franco da

    2015-11-01

    The surface coat of Trypanosoma cruzi is predominantly composed of glycosylphosphatidylinositol-anchored proteins, which have been extensively characterized. However, very little is known about less abundant surface proteins and their role in host-parasite interactions. Here, we described a novel family of T. cruzi surface membrane proteins (TcSMP), which are conserved among different T. cruzi lineages and have orthologs in other Trypanosoma species. TcSMP genes are densely clustered within the genome, suggesting that they could have originated by tandem gene duplication. Several lines of evidence indicate that TcSMP is a membrane-spanning protein located at the cellular surface and is released into the extracellular milieu. TcSMP exhibited the key elements typical of surface proteins (N-terminal signal peptide or signal anchor) and a C-terminal hydrophobic sequence predicted to be a trans-membrane domain. Immunofluorescence of live parasites showed that anti-TcSMP antibodies clearly labeled the surface of all T. cruzi developmental forms. TcSMP peptides previously found in a membrane-enriched fraction were identified by proteomic analysis in membrane vesicles as well as in soluble forms in the T. cruzi secretome. TcSMP proteins were also located intracellularly likely associated with membrane-bound structures. We demonstrated that TcSMP proteins were capable of inhibiting metacyclic trypomastigote entry into host cells. TcSMP bound to mammalian cells and triggered Ca2+ signaling and lysosome exocytosis, events that are required for parasitophorous vacuole biogenesis. The effects of TcSMP were of lower magnitude compared to gp82, the major adhesion protein of metacyclic trypomastigotes, suggesting that TcSMP may play an auxiliary role in host cell invasion. We hypothesized that the productive interaction of T. cruzi with host cells that effectively results in internalization may depend on diverse adhesion molecules. In the metacyclic forms, the signaling induced by

  18. 46 CFR 108.463 - Foam rate: Protein.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Foam rate: Protein. 108.463 Section 108.463 Shipping... EQUIPMENT Fire Extinguishing Systems Foam Extinguishing Systems § 108.463 Foam rate: Protein. (a) If the outlets of a protein foam extinguishing system are in a space, the foam rate at each outlet must be at...

  19. Making continuous bubble type polyethylene foam incombustible

    International Nuclear Information System (INIS)

    Kaji, Kanako; Hatada, Motoyoshi; Yoshizawa, Iwao; Komai, Kuniaki; Kohara, Choji.

    1989-01-01

    Since continuous bubble type plastic foam has excellent compression characteristics and sound absorption characteristics, it has been widely used as cushion material, sealing material, sound insulating material and so on. However, the most part of plastic foam is taken by air, therefore at the time of fires, it becomes a very dangerous material. At present, the material used mostly as the seat cushions for airliners, railroad coaches, automobiles and others is polyurethane foam, but since it contains C-N couples in its molecules, it is feared to generate cyanic gas according to the condition of combustion. As the plastic foam that does not generate harmful gas at the time of fires, there is continuous bubble type polyethylene which is excellent in its weathering property and chemical resistance. A reactive, phosphorus-containing oligomer has large molecular weight and two or more double couplings in a molecule, therefore, it does not enter the inside of polyethylene, and polymerizes and crosslinks on the surfaces of bubble walls in the foam, accordingly it is expected that the apparent graft polymerization is carried out, and it is very effective for making polyethylene foam incombustible. The method of making graft foam, the properties of graft foam and so on are reported. When the graft polymerization of this oligomer to continuous bubble type polyethylene foam was tried, highly incombustible polyethylene foam was obtained. (K.I.)

  20. Covering sources of toxic vapors with foam

    International Nuclear Information System (INIS)

    Aue, W. P.; Guidetti, F.

    2009-01-01

    In a case of chemical terrorism, first responders might well be confronted with a liquid source of toxic vapor which keeps spreading out its hazardous contents. With foam as an efficient and simple means, such a source could be covered up in seconds and the spread of vapors mitigated drastically. Once covered, the source could then wait for a longer time to be removed carefully and professionally by a decontamination team. In order to find foams useful for covering up toxic vapor sources, a large set of measurements has been performed in order to answer the following questions: - Which foams could be used for this purpose? - How thick should the foam cover be? - For how long would such a foam cover be effective? - Could the practical application of foam cause a spread of the toxic chemical? The toxic vapors sources included GB, GD and HD. Among the foams were 10 fire fighter foams (e.g. AFFF, protein) and the aqueous decontamination foam CASCAD. Small scale experiments showed that CASCAD is best suited for covering a toxic source; a 10 cm layer of it covers and decontaminates GB. The large scale experiments confirmed that any fire fighter foam is a suitable cover for a longer or shorter period.(author)

  1. Morphological parameters associated with ruptured posterior communicating aneurysms.

    Science.gov (United States)

    Ho, Allen; Lin, Ning; Charoenvimolphan, Nareerat; Stanley, Mary; Frerichs, Kai U; Day, Arthur L; Du, Rose

    2014-01-01

    The rupture risk of unruptured intracranial aneurysms is known to be dependent on the size of the aneurysm. However, the association of morphological characteristics with ruptured aneurysms has not been established in a systematic and location specific manner for the most common aneurysm locations. We evaluated posterior communicating artery (PCoA) aneurysms for morphological parameters associated with aneurysm rupture in that location. CT angiograms were evaluated to generate 3-D models of the aneurysms and surrounding vasculature. Univariate and multivariate analyses were performed to evaluate morphological parameters including aneurysm volume, aspect ratio, size ratio, distance to ICA bifurcation, aneurysm angle, vessel angles, flow angles, and vessel-to-vessel angles. From 2005-2012, 148 PCoA aneurysms were treated in a single institution. Preoperative CTAs from 63 patients (40 ruptured, 23 unruptured) were available and analyzed. Multivariate logistic regression revealed that smaller volume (p = 0.011), larger aneurysm neck diameter (0.048), and shorter ICA bifurcation to aneurysm distance (p = 0.005) were the most strongly associated with aneurysm rupture after adjusting for all other clinical and morphological variables. Multivariate subgroup analysis for patients with visualized PCoA demonstrated that larger neck diameter (p = 0.018) and shorter ICA bifurcation to aneurysm distance (p = 0.011) were significantly associated with rupture. Intracerebral hemorrhage was associated with smaller volume, larger maximum height, and smaller aneurysm angle, in addition to lateral projection, male sex, and lack of hypertension. We found that shorter ICA bifurcation to aneurysm distance is significantly associated with PCoA aneurysm rupture. This is a new physically intuitive parameter that can be measured easily and therefore be readily applied in clinical practice to aid in the evaluation of patients with PCoA aneurysms.

  2. Ex vivo repair of renal artery aneurysm associated with surgical treatment of abdominal aortic aneurysm

    Directory of Open Access Journals (Sweden)

    Kostić Dušan M.

    2004-01-01

    Full Text Available INTRODUCTION Renal artery aneurysms is relatively uncommon with reported incidence ranges from 0.3% to 1%. However, considering all visceral artery aneurysms the percentage of renal artery aneurysms is relatively high between 15-25%. The distal forms of renal artery aneurysms sometimes require "ex vivo" reconstruction and kidney autotransplantation. CASE REPORT A 75-year-old male presented with the right abdominal and back pain. He suffered from a long history of arterial hypertension and chronic renal failure over the last few months (urea blood = 19.8 mmol/l; creatinine = 198 mmol/l. Duplex ultrasonography showed abdominal aortic aneurysm. Subsequent translumbarangiography revealed juxtarenal abdominal aortic aneurysm associated with distal right renal artery aneurysm. The operation was performed under combined thoracic epidural analgesia and general anesthesia using transperitoneal approach. After the laparotomy, the ascending colon was mobilized and reflected medially followed by Kocher maneuver. The result was visualization of the anterior aspect of the right kidney, the collecting system, ureter as well as the right renal vein and artery with large saccular aneurysm located distally. After mobilization of the renal vessels and careful dissection of the ureter, the kidney was explanted. The operation was continued by two surgical teams. The first team performed abdominal aortic aneurysm resection and reconstruction with bifurcated Dacron graft. The second team performed ex vivo reparation of renal artery aneurysm. All time during the explantation, the kidney was perfused by Collins' solution. The saccular right renal artery aneurysm 4 cm in diameter was located at the kidney hilus at the first bifurcation. Three branches originated from the aneurysm. The aneurysm was resected completely. The longest and widest of three branches arising from the aneurysmal sac was end-to-end anastomized with 6 mm PTFE graft. After this intervention, one of

  3. Correlation between the clinical presentation and DSA of intracranial aneurysms

    International Nuclear Information System (INIS)

    Fang Chun; Hua Jia; Chen Kemin; Yin Yan; Ge Xin; Ying Yiping

    2001-01-01

    Objective: To evaluate the correlation between the clinical presentation and cerebral angiographic features of intracranial aneurysms. Methods: The authors retrospectively analyzed the relationship between the size, location and shape of 48 patient's cerebral aneurysms and their clinical presentations. Results: Clinical symptoms of cerebral aneurysms were related with their size, location and shape. Aneurysms in different location or at same location may cause similar symptoms or different symptoms. Rotation DSA is a useful examination supplemented to conventional DSA. Conclusions: The relationship between the location and the presentation of intracranial aneurysms is not specific. Rotation DSA plays important role in showing the characteristics of the cerebral aneurysms

  4. Bilateral giant femoropopliteal artery aneurysms: a case report

    Directory of Open Access Journals (Sweden)

    Perdikides Theodossios P

    2008-04-01

    Full Text Available Abstract Introduction Popliteal artery aneurysms are the most common peripheral arterial aneurysms, and are frequently bilateral. Acute limb ischemia, rupture and compression phenomena can complicate these aneurysms when the diameter exceeds 2 cm. Case Presentation We report an 82-year-old male patient with two giant femoropopliteal aneurysms, 10.5 and 8.5 cm diameters, managed in our institution. Both aneurysms were resected and a polytetrafluoroethylene (PTFE femoropopliteal interposition graft was placed successfully. Management and literature review are discussed. Conclusion We believe this is the first report in the medical literature of bilateral giant femoropopliteal aneurysms.

  5. Infectious or Noninfectious? Ruptured, Thrombosed Inflammatory Aortic Aneurysm with Spondylolysis

    Energy Technology Data Exchange (ETDEWEB)

    Stefanczyk, Ludomir; Elgalal, Marcin, E-mail: telgalal@yahoo.co.uk [Medical University of Lodz, Department of Radiology and Diagnostic Imaging (Poland); Papiewski, Andrzej [Medical University of Lodz, Department of Gastroenterological Surgery (Poland); Szubert, Wojciech [Medical University of Lodz, Department of Radiology and Diagnostic Imaging (Poland); Szopinski, Piotr [Institute of Hematology and Transfusion Medicine, Clinic of Vascular Surgery (Poland)

    2013-06-15

    Osteolysis of vertebrae due to inflammatory aortic aneurysm is rarely observed. However, it is estimated that up to 10 % of infectious aneurysms coexist with bone tissue destruction, most commonly the vertebrae. Inflammatory aneurysms with no identified infection factor, along with infiltration of adjacent muscle and in particular extensive destruction of bone tissue have rarely been described in the literature. A case of inflammatory aneurysm with posterior wall rupture and inflammatory infiltration of the iliopsoas muscle and spine, together with extensive vertebral body destruction, is presented. The aneurysm was successfully treated with endovascular aneurysm repair EVAR.

  6. Infectious or Noninfectious? Ruptured, Thrombosed Inflammatory Aortic Aneurysm with Spondylolysis

    International Nuclear Information System (INIS)

    Stefańczyk, Ludomir; Elgalal, Marcin; Papiewski, Andrzej; Szubert, Wojciech; Szopiński, Piotr

    2013-01-01

    Osteolysis of vertebrae due to inflammatory aortic aneurysm is rarely observed. However, it is estimated that up to 10 % of infectious aneurysms coexist with bone tissue destruction, most commonly the vertebrae. Inflammatory aneurysms with no identified infection factor, along with infiltration of adjacent muscle and in particular extensive destruction of bone tissue have rarely been described in the literature. A case of inflammatory aneurysm with posterior wall rupture and inflammatory infiltration of the iliopsoas muscle and spine, together with extensive vertebral body destruction, is presented. The aneurysm was successfully treated with endovascular aneurysm repair EVAR.

  7. PROFIL REPRESENTASI SISWA SMP TERHADAP MATERI PLSV DITINJAU DARI GAYA BELAJAR KOLB

    Directory of Open Access Journals (Sweden)

    Fariz Setyawan

    2017-07-01

    ABSTRACT This is a descriptive qualitative research. The aim of this study is to describe the representation profile of Linear Equation of One Variable (LEOV of Junior High School Students based on Kolb’ Learning styles: assimilator, akomodator, konverger, and diverger. The researcher conduct an interview with four SMP N 22 Surabaya students whom qualify the characteristics of Kolb’s learning styles. There are three analysis data phases: data reduction, data representation, and conclusion. Based on the result, Assimilator Subject (SA make connection between LEOV’s representation by looking for its similarity and prefer symbol representation. Akomodator Subject (SM make connection between symbol representation (S and word representation (K based on the number similarity. Converger Subject (SK make connection between representations: word (K, diagram (D and symbol (S representation based on its practical uses. Diverger Subject (SD make connection between representation based on given word and number similarities and the solution which is derived. Keywords: representation, leov, kolb’s learning styles.

  8. Study of fuel element characteristic of SM and SMP (SM-PRIMA) fuel assemblies

    International Nuclear Information System (INIS)

    Klinov, A.V.; Kuprienko, V.A.; Lebedev, V.A.; Makhin, V.M.; Tuchnin, L.M.; Tsykanov, V.A.

    1999-01-01

    The paper discusses the techniques and results of reactor tests and post-reactor investigations of the SM reactor fuel elements and fuel elements developed in the process of designing the specialized PRIMA test reactor with the SM reactor fuel elements used as a prototype and which are referred to as the SMP fuel elements. The behavior of fuel elements under normal operating conditions and under deviation from normal operating conditions was studied to verify the calculation techniques, to check the calculation results during preparation of the SM reactor safety substantiation report and to estimate the possibility of using such fuel elements in other projects. During tests of fuel rods under deviation from normal operating conditions their advantages were shown over fuel elements, the components of which were produced using the Al-based alloys. (author)

  9. ANALISIS KEBUTUHAN UNTUK PENGEMBANGAN MODUL INKUIRI BERBASIS PERTANYAAN (MIBP DI SMP

    Directory of Open Access Journals (Sweden)

    Desak Made Citrawathi

    2016-08-01

    Full Text Available melakukan analisis kebutuhan untuk pengembangan dan penyusunan modul inkuri berbasis pertanyaan (MIBP. MIBP disusun untuk memfasilitasi pembelajaran sains agar dapat meningkatkan penguasaan konsep biologi, keterampilan proses sains, dan kemampuan berpikir siswa SMP. Pengembangan MIBP menggunakan model ADDIE. Prosedur pengembangan terdiri dari 5 tahap, yaitu 1 Menganalisis, 2 Mendisain, 3 Mengembangkan dan produksi, 4 Mengimplementasikan, dan 5 Mengevaluasi. Penelitian dilakukan dalam waktu 3 tahun. Pada tahun pertama ini dilakukan analisis kebutuhan dan mendisain MIBP. Subjek penelitian adalah guru IPA SMP Negeri dan Swasta di Kecamatan Buleleng. Pengumpulan data dilakukan dengan wawancara, penyebaran angket, observasi, dan dokumentasi. Analisis data dilakukan secara deskriptif dan interpretatif. Dari hasil analisis diperoleh bahwa kurikulum yang digunakan di SMPN 1,SMPN 2, dan SMPN 4 adalah kurikulum 2013, sedangkan di SMP lainnya masih menggunakan kurikulum 2006. Kemampuan guru bertanya untuk meningkatkan keterampilan proses sains, penguasaan konsep, dan kemampuan berpikir belum optimal. Hal ini ditunjukkan dari jenis pertanyaan yang diajukan guru 85,8 persen bersifat konvergen, dan 14,2 persen bersifat divergen. Berdasarkan pertanyaan menurut Taksonomi Bloom, pertanyaan yang diajukan guru 74,4 persen pertanyaan ingatan, 22,6 persen pemahaman, 2,68 persen aplikasi, dan 0,32 persen analisis. Salah satu yang dapat dilakukan untuk meningkatkan kemampuan guru adalah memfasilitasi pembelajarannya dengan MIBP. Dari karakteristik perkembangan kognitifnya, siswa SMP dapat dibelajarkan dengan strategi inkuiri, dan guru setuju dengan pengembangan MIBP. Kata kunci: Kemampuan berpikir, keterampilan proses sains, Modul Inkuiri Berbasis Pertanyaan, penguasaan konsep Pertanyaan, penguasaan konsep Abstract The purpose of this study was to analyze the need for the development and preparation of question-based inquiry module (QBIM. QBIM was designed conceiv to

  10. Comparing the OpenMP, MPI, and Hybrid Programming Paradigm on an SMP Cluster

    Science.gov (United States)

    Jost, Gabriele; Jin, Hao-Qiang; anMey, Dieter; Hatay, Ferhat F.

    2003-01-01

    Clusters of SMP (Symmetric Multi-Processors) nodes provide support for a wide range of parallel programming paradigms. The shared address space within each node is suitable for OpenMP parallelization. Message passing can be employed within and across the nodes of a cluster. Multiple levels of parallelism can be achieved by combining message passing and OpenMP parallelization. Which programming paradigm is the best will depend on the nature of the given problem, the hardware components of the cluster, the network, and the available software. In this study we compare the performance of different implementations of the same CFD benchmark application, using the same numerical algorithm but employing different programming paradigms.

  11. Analisis Faktor Kerusakan Bahan Pustaka di Perpustakaan SMP Negeri 4 Sungguminasa, Gowa

    Directory of Open Access Journals (Sweden)

    St. Ummu Salamah

    2015-11-01

    Full Text Available The damaged of library collections must be concerned by all type of libraries. It always occured in library, particularly in school libraries. The study will investigate factors that damaged library collections and ways to solve such a case in the library of SMP 4 Sungguminasa, Gowa (a secondary school located in Gowa, South Sulawesi. The data were gathred through direct observations and interviews with staf in the library. The study found that there were kinds of damaged of library collection, which were 1 caused by studens, 2 caused by floods, and 3 caused by insects. In terms of its preservation, the library have some solutions which were 1 determining strict penalties for the library users who have damaged the collections, 2 binding library materials, 3 setting the library room, 4 maka a report to the school authoritative to care of library school, 5 cleaning routinely the library shelves.

  12. HUBUNGAN KEPERCAYAAN DIRI DENGAN PENYESUAIAN SOSIAL PADA REMAJA DI KELAS II SMP MUHAMMADIYAH 1 MALANG

    Directory of Open Access Journals (Sweden)

    Aziza Fitriah

    2013-05-01

    those two variables were independence variable as self confidence and dependence variable as social adaptations. The type of this research was quantitative research (non-experiment. The respondents were 60 students of second grade in SMP Muhammadiyah 1 Malang. The supporting data of this research was gotten by observing and interviewing. And the collecting data technique used linkert scale questionnaire, and data analysis used correlation product moment by Karl Pearson. According to hypothesis test result could be taken the data between self confidence and social adaptation there was a significance correlations. Other wise the higher of teenage self confidence would make the teenage easier to do social adaptations with their social society around them.

  13. Embolization of Brain Aneurysms and Fistulas

    Science.gov (United States)

    ... care physician. top of page What are the benefits vs. risks? Benefits Using detachable coils to close off an aneurysm ... risk of infection. The chance of infection requiring antibiotic treatment appears to be less than one in ...

  14. Dissecting aortic aneurysm in maintenance hemodialysis patients

    Directory of Open Access Journals (Sweden)

    Ounissi M

    2009-01-01

    Full Text Available The dissecting aortic aneurysm (DAA is a rare pathology that may result in fatal outcome. We report follow up of three cases of DAA patients undergoing maintenance hemo-dialysis who were managed conservatively.

  15. Traumatic intracranial aneurysm: a case report

    International Nuclear Information System (INIS)

    Kang, Si Won; Chun, Kyung Ah; Baik, Joon Hyun; Shin, Kyung Sub

    1994-01-01

    The occurrence of traumatic aneurysm is rare in head injury, but this complication is important as it is a potentially treatable cause delayed onset of intracranial hemorrhage. Authors report one case of traumatic aneurysm involving A1 and A2 junction of anterior cerebral artery. A-28-year-old man with traffic accident was examined with brain CT and cerebral angiography. 1) Brain CT: Initial scan shows multiple skull fractures involving right frontal bones with subarachnoid hemorrhage and pneumocephalus. Follow-up scan shows intracerebral hemorrhage at bilateral frontal lobes. 2) Cerebral angiography: A traumatic aneurysm which is slowly filling and delayed emptying is noted at the junctional portion of A1 and A2 segment of the anterior cerebral artery. This report demonstrates radiologic findings of traumatic aneurysm at anterior cerebral artery with the brief review of the literatures

  16. MR angiography after coiling of intracranial aneurysms

    NARCIS (Netherlands)

    Schaafsma, J.D.

    2012-01-01

    Introduction Endovascular occlusion with detachable coils has become an alternative treatment to neurosurgical clipping of intracranial aneurysms over the last two decades. Its minimal invasiveness is the most important advantage of this treatment compared to clipping. The disadvantage of occlusion

  17. Hypopituitarism is uncommon after aneurysmal subarachnoid haemorrhage

    DEFF Research Database (Denmark)

    Klose, Marianne; Brennum, Jannick; Poulsgaard, Lars

    2010-01-01

    Aneurysmal subarachnoid haemorrhage (SAH) has recently been reported as a common cause of chronic hypopituitarism, and introduction of routine neuroendocrine screening has been advocated. We aimed at estimating the risk of hypopituitarism after SAH using strict criteria including confirmatory...

  18. Training model for cerebral aneurysm clipping

    Directory of Open Access Journals (Sweden)

    Hiroshi Tenjin, M.D., Ph.D.

    2017-12-01

    Full Text Available Clipping of cerebral aneurysms is still an important skill in neurosurgery. We have made a training model for the clipping of cerebral aneurysms. The concepts for the model were 1: training model for beginners, 2: three dimensional manipulation using an operating microscope, 3: the aneurysm model is to be perfused by simulated blood causing premature rupture. The correct relationship between each tissue, and softness of the brain and vessels were characteristics of the model. The skull, brain, arteries, and veins were made using a 3D printer with data from DICOM. The brain and vessels were made from polyvinyl alcohol (PVA. One training course was held and this model was useful for training of cerebral aneurysm surgery for young neurosurgeons.

  19. Foam-oil interaction in porous media: implications for foam assisted enhanced oil recovery.

    Science.gov (United States)

    Farajzadeh, R; Andrianov, A; Krastev, R; Hirasaki, G J; Rossen, W R

    2012-11-15

    The efficiency of a foam displacement process in enhanced oil recovery (EOR) depends largely on the stability of foam films in the presence of oil. Experimental studies have demonstrated the detrimental impact of oil on foam stability. This paper reviews the mechanisms and theories (disjoining pressure, coalescence and drainage, entering and spreading of oil, oil emulsification, pinch-off, etc.) suggested in the literature to explain the impact of oil on foam stability in the bulk and porous media. Moreover, we describe the existing approaches to foam modeling in porous media and the ways these models describe the oil effect on foam propagation in porous media. Further, we present various ideas on an improvement of foam stability and longevity in the presence of oil. The outstanding questions regarding foam-oil interactions and modeling of these interactions are pointed out. Copyright © 2012 Elsevier B.V. All rights reserved.

  20. GAMBARAN TINGKAT DEPRESI TERHADAP PERILAKU BULLYING PADA SISWA DI SMP PGRI 2 DENPASAR

    Directory of Open Access Journals (Sweden)

    I Gede Surya Kardiana

    2015-06-01

    Full Text Available Remaja merupakan individu yang sedang dalam tahapan perkembangan transisi, sehingga pada tahapan ini banyak permasalahan yang sering muncul seperti perilaku bullying. Bullying merupakan tindakan agresif yang terus menerus dapat berupa bentuk fisik, verbal, dan psikologis. Perilaku bullying ini dapat menyebabkan gangguan fisik maupun psikologis salah satunya dapat mengalami depresi. Depresi ini dapat mempengaruhi aktivitas belajarnya sehingga perlu dideteksi secara dini tentang gambaran tingkat depresi terhadap perilaku bullying di SMP PGRI 2 Denpasar. Penelitian ini merupakan penelitian deskirptif kuantitatif dengan rancangan deskiptif cross sectional yang dilakukan pada tanggal 22 Maret 2015 di SMP PGRI 2 Denpasar. Sampel diambil dengan teknik stratified random sampling dan didapatkan 95 sampel yang memenuhi kriteria inklusi dan ekslusi. Data dikumpulkan dengan menggunakan kuisioner victimization scale - adolenscent peer relations instrument dan Beck depression inventory (BDI. Hasil Penelitian ditemukan sebesar 28,4% mengalami perilaku bullying intensitas ringan dan 6,3% mengalami perilaku bullying intensitas sedang dan responden lainnya tidak pernah mengalami perilaku bullying. Tingkat depresi ditemukan 26,3% depresi ringan, 14,7% depresi sedang dan responden lainnya normal. Kecenderungan siswa yang mengalami perilaku bullying intensitas sedang mengalami depresi sedang sebesar 66,7%, dan dari yang mengalami perilaku bullying intensitas ringan sebesar 33,3% mengalami depresi ringan. Siswa yang mengalami perilaku bullying intensitas sedang cenderung mengalami depresi sedang. Perilaku bullying yang paling sering dilakukan yaitu bullying verbal, diikuti bullying fisik. Perempuan cenderung menjadi korban bullying daripada laki-laki. Kesimpulan, perlu penelitian lebih lanjut untuk faktor-faktor lainnya yang dapat mempengaruhi perilaku bullying dan tingkat depresi pada siswa.

  1. KEBIASAAN SARAPAN, STATUS GIZI, DAN KUALITAS HIDUP REMAJA SMP BOSOWA BINA INSANI BOGOR

    Directory of Open Access Journals (Sweden)

    Ilyatun Niswah

    2014-11-01

    Full Text Available ABSTRACTThe objective of this study was to examine the association between breakfast habits, nutritional status, and health related quality of life of adolescents in Bosowa Bina Insani Junior High School Bogor. A cross sectional study was conducted and simple random sampling was used to determine the subjects. Subjects were 60 adolescent students of Bosowa Bina Insani Junior High School Bogor aged 13—15 years old. The study found there was no significant difference in nutritional status between breakfast skippers and breakfast eaters (p>0.05. However, regular breakfast eaters were more likely to have lower body weight (r=-0.160, p=0.222. There was no significant difference of health related quality of life based on nutritional status (p>0.05. Breakfast eaters tended to have better quality of life than breakfast skippers even though there was no significant difference between them (p>0.05.Keywords: adolescents, breakfast habits, food consumption, health related quality of life, nutritionalstatusABSTRAKPenelitian ini bertujuan mengkaji hubungan kebiasaan sarapan, status gizi, dan kualitas hidup pada remaja SMP Bosowa Bina Insani Bogor. Desain penelitian ini adalah cross sectional dengan penarikan subjek secara simple random sampling. Subjek berjumlah 60 remaja berusia 13—15 tahun yang merupakan siswa-siswi SMP Bosowa Bina Insani Bogor. Hasil penelitian menunjukkan tidak terdapat perbedaan signifikan status gizi berdasarkan kebiasaan sarapan (p>0.05 namun terdapat kecenderungan semakin sering konsumsi sarapan, berat badan semakin menurun (r=-0.160, p=0.222. Tidak terdapat perbedaan signifikan kualitas hidup berdasarkan status gizi (p>0.05. Kualitas hidup pada kelompok yang biasa sarapan cenderung lebih tinggi dibandingkan kelompok yang tidak biasa sarapan, namun tidak terdapat perbedaan signifikan secara statistik (p>0.05.Kata kunci: kebiasaan sarapan, konsumsi pangan, kualitas hidup, remaja, status gizi

  2. Activated, coal-based carbon foam

    Science.gov (United States)

    Rogers, Darren Kenneth; Plucinski, Janusz Wladyslaw

    2004-12-21

    An ablation resistant, monolithic, activated, carbon foam produced by the activation of a coal-based carbon foam through the action of carbon dioxide, ozone or some similar oxidative agent that pits and/or partially oxidizes the carbon foam skeleton, thereby significantly increasing its overall surface area and concurrently increasing its filtering ability. Such activated carbon foams are suitable for application in virtually all areas where particulate or gel form activated carbon materials have been used. Such an activated carbon foam can be fabricated, i.e. sawed, machined and otherwise shaped to fit virtually any required filtering location by simple insertion and without the need for handling the "dirty" and friable particulate activated carbon foam materials of the prior art.

  3. The mechanical behavior of microcellular foams

    Energy Technology Data Exchange (ETDEWEB)

    Ozkul, M.H.; Mark, J.E. (Cincinnati Univ., OH (USA)); Aubert, J.H. (Sandia National Labs., Albuquerque, NM (USA))

    1990-01-01

    The mechanical behavior of microcellular open-cell foams prepared by a thermally induced phase separation process are investigated. The foams studied were prepared from isotactic polystyrene, polyacrylonitrile, and poly(4-methyl-1-pentene) (rigid foams), and polyurethane and Lycra (elastomeric foams). Their densities were in the range 0.04--0.27 g/cm3. Conventional polystyrene foams were used for comparison. The moduli and collapse stresses of these foams were measured in compression and compared with the current constitutive laws which relate mechanical properties to densities. A reinforcement technique based on the in-situ precipitation of silica was used to improve the mechanical properties. 13 refs., 4 figs., 3 tabs.

  4. Cellulose nanocrystals reinforced foamed nitrile rubber nanocomposites.

    Science.gov (United States)

    Chen, Yukun; Zhang, Yuanbing; Xu, Chuanhui; Cao, Xiaodong

    2015-10-05

    Research on foamed nitrile rubber (NBR)/cellulose nanocrystals (CNs) nanocomposites is rarely found in the literatures. In this paper, CNs suspension and NBR latex was mixed to prepared the foamed NBR/CNs nanocomposites. We found that the CNs mainly located in the cell walls, effectively reinforcing the foamed NBR. The strong interaction between the CNs and NBR matrix restricted the mobility of NBR chains surrounding the CNs, hence increasing the crosslink density of the NBR matrix. CNs exhibited excellent reinforcement on the foamed NBR: a remarkable increase nearly 76% in the tensile strength of the foamed nanocomposites was achieved with a load of only 15 phr CNs. Enhanced mechanical properties make the foamed NBR/CNs nanocomposites a promising damping material for industrial applications with a potential to reduce the petroleum consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Crosslinked polyethylene foams, via eb radiation

    International Nuclear Information System (INIS)

    Cardoso, E.C.L.; Lugao, A. B.; Andrade e Silva, L. G.

    1998-01-01

    Polyethylene foams, produced by radio-induced crosslinking, show a smooth and homogeneous surface, when compared to chemical crosslinking method using peroxide as crosslinking agent. This process fosters excellent adhesive and printability properties. Besides that, closed cells, intrinsic to these foams, imparts optimum mechanical, shocks and insulation resistance, indicating these foams to some markets segments as: automotive and transport; buoyancy, flotation and marine; building and insulation; packaging; domestic sports and leisure goods. We were in search of an ideal foam, by adding 5 to 15% of blowing agent in LDPE. A series of preliminary trials defined 203 degree sign C as the right blowing agent decomposition temperature. At a 22.7 kGys/dose ratio, the lowest dose for providing an efficient foam was 30 kGy, for a formulation comprising 10% of azodicarbonamide in LDPE, within a 10 minutes foaming time

  6. Nanostructured metal foams: synthesis and applications

    Energy Technology Data Exchange (ETDEWEB)

    Luther, Erik P [Los Alamos National Laboratory; Tappan, Bryce [Los Alamos National Laboratory; Mueller, Alex [Los Alamos National Laboratory; Mihaila, Bogdan [Los Alamos National Laboratory; Volz, Heather [Los Alamos National Laboratory; Cardenas, Andreas [Los Alamos National Laboratory; Papin, Pallas [Los Alamos National Laboratory; Veauthier, Jackie [Los Alamos National Laboratory; Stan, Marius [Los Alamos National Laboratory

    2009-01-01

    Fabrication of monolithic metallic nanoporous materials is difficult using conventional methodology. Here they report a relatively simple method of synthesizing monolithic, ultralow density, nanostructured metal foams utilizing self-propagating combustion synthesis of novel metal complexes containing high nitrogen energetic ligands. Nanostructured metal foams are formed in a post flame-front dynamic assembly with densities as low as 0.011 g/cc and surface areas as high as 270 m{sup 2}/g. They have produced metal foams via this method of titanium, iron, cobalt, nickel, zirconium, copper, palladium, silver, hafnium, platinum and gold. Microstructural features vary as a function of composition and process parameters. Applications for the metal foams are discussed including hydrogen absorption in palladium foams. A model for the sorption kinetics of hydrogen in the foams is presented.

  7. Splenic artery aneurysm rupture in pregnancy

    International Nuclear Information System (INIS)

    Khan, H.R.; Low, S.; Selinger, M.; Nelson, N.

    2004-01-01

    Rupture of a splenic artery aneurysm, commonly associated with pregnancy is a rare and catastrophic event. We report here a case of a patient in her second pregnancy who presented with a short history of left hypochondriac and epigastric pain, followed by collapse at 32 weeks gestation. Sudden fetal distress lead to emergency caesarean delivery when splenic artery aneurysm rupture was diagnosed. With timely involvement of multidisciplinary personnel both mother and baby survived and had an uneventful recovery. (author)

  8. Intracranial Aneurysms of Neuro-Ophthalmologic Relevance.

    Science.gov (United States)

    Micieli, Jonathan A; Newman, Nancy J; Barrow, Daniel L; Biousse, Valérie

    2017-12-01

    Intracranial saccular aneurysms are acquired lesions that often present with neuro-ophthalmologic symptoms and signs. Recent advances in neurosurgical techniques, endovascular treatments, and neurocritical care have improved the optimal management of symptomatic unruptured aneurysms, but whether the chosen treatment has an impact on neuro-ophthalmologic outcomes remains debated. A review of the literature focused on neuro-ophthalmic manifestations and treatment of intracranial aneurysms with specific relevance to neuro-ophthalmologic outcomes was conducted using Ovid MEDLINE and EMBASE databases. Cavernous sinus aneurysms were not included in this review. Surgical clipping vs endovascular coiling for aneurysms causing third nerve palsies was compared in 13 retrospective studies representing 447 patients. Complete recovery was achieved in 78% of surgical patients compared with 44% of patients treated with endovascular coiling. However, the complication rate, hospital costs, and days spent in intensive care were reported as higher in surgically treated patients. Retrospective reviews of surgical clipping and endovascular coiling for all ocular motor nerve palsies (third, fourth, or sixth cranial nerves) revealed similar results of complete resolution in 76% and 49%, respectively. Improvement in visual deficits related to aneurysmal compression of the anterior visual pathways was also better among patients treated with clipping than with coiling. The time to treatment from onset of visual symptoms was a predictive factor of visual recovery in several studies. Few reports have specifically assessed the improvement of visual deficits after treatment with flow diverters. Decisions regarding the choice of therapy for intracranial aneurysms causing neuro-ophthalmologic signs ideally should be made at high-volume centers with access to both surgical and endovascular treatments. The status of the patient, location of the aneurysm, and experience of the treating physicians

  9. Foaming in manure based digesters: Effect of overloading and foam suppression using antifoam agents

    OpenAIRE

    Kougias, Panagiotis; Tsapekos, Panagiotis; Boe, Kanokwan; Angelidaki, Irini

    2013-01-01

    Anaerobic digestion foaming is one of the major problems that occasionally occur in full-scale biogas plants, affecting negatively the overall digestion process. The foam is typically created either in the main biogas reactor or/and in the pre-storage tank and the entrapped solids in the foam cause severe operational problems, such as blockage of mixing devices and collapse of pumps. Furthermore, the foaming problem is linked with economic consequences for biogas plants, due to income losses ...

  10. Development of a posterior cerebral artery aneurysm subsequent to occlusion of the contralateral internal carotid artery for giant cavernous aneurysm

    International Nuclear Information System (INIS)

    Wolf, R.L.; Hurst, R.W.; Imbesi, S.G.; Galetta, S.L.; Sinson, G.P.; Grossman, R.I.

    2002-01-01

    We report a case of a patient who developed a left posterior cerebral artery aneurysm 5 years after balloon occlusion of the right internal carotid artery for a giant cavernous aneurysm. The location of the new aneurysm was outside of the primary collateral pathways to the contralateral, proximally occluded, anterior circulation, illustrating the complexity of hemodynamic factors contributing to the development of intracranial saccular aneurysms. The appearance of an aneurysm in this setting supports the hypothesis that degenerative factors and hemodynamic stresses are important in the etiology of intracranial aneurysms. (orig.)

  11. Abciximab for thrombolysis during intracranial aneurysm coiling

    International Nuclear Information System (INIS)

    Gralla, Jan; Rennie, Adam T.M.; Corkill, Rufus A.; Lalloo, Shivendra T.; Molyneux, Andrew; Byrne, James V.; Kuker, Wilhem

    2008-01-01

    Thrombotic events are a common and severe complication of endovascular aneurysm treatment with significant impact on patients' outcome. This study evaluates risk factors for thrombus formation and assesses the efficacy and safety of abciximab for clot dissolution. All patients treated with abciximab during (41 patients) or shortly after (22 patients) intracranial aneurysm coil embolisation were retrieved from the institutional database (2000 to 2007, 1,250 patients). Sixty-three patients (mean age, 55.3 years, ±12.8) had received either intra-arterial or intravenous abciximab. Risk factors for clot formation were assessed and the angiographic and clinical outcome evaluated. No aneurysm rupture occurred during or after abciximab application. The intra-procedural rate of total recanalisation was 68.3%. Thromboembolic complications were frequently found in aneurysms of the Acom complex and of the basilar artery, whilst internal carotid artery aneurysms were underrepresented. Two patients died of treatment-related intracranial haemorrhages into preexisting cerebral infarcts. Two patients developed a symptomatic groin haematoma. Abciximab is efficacious and safe for thrombolysis during and after endovascular intracranial aneurysm treatment in the absence of preexisting ischaemic stroke. (orig.)

  12. Endovascular therapeutic strategies in ruptured intracranial aneurysms

    International Nuclear Information System (INIS)

    Machi, Paolo; Lobotesis, Kyriakos; Vendrell, Jean Francoise; Riquelme, Carlos; Eker, Omer; Costalat, Vincent; Bonafe, Alain

    2013-01-01

    The aim of the present study was to evaluate endovascular techniques used currently which were not available at the time of ISAT inclusion period, such as balloon remodelling and flow-divertion, in order to assess whether these new technologies have improved the endovascular approach outcomes. We present a review of articles, published in major journals, with the aim to evaluate the efficacy and the safety of coiling with balloon remodelling for the treatment of ruptured aneurysms in comparison to coiling performed without such coadjutant techniques. Furthermore, we reviewed publications reporting on the treatment of ruptured aneurysms in the acute phase with the one of the most recent technologies available nowadays: the flow diverting stent. Looking at the recent literature the results regarding ruptured aneurysms treated with balloon assisted coiling (BAC) have shown an improvement in terms of anatomical results and morbi-mortality rates. Case series of ruptured middle cerebral artery (MCA) aneurysms treated by EVT report results similar to those obtained by surgical clipping. Several articles recently report encouraging results in treating ruptured dissecting and blister aneurysms with flow diverters. Questions regarding the best treatment available for ruptured aneurysms are yet to be answered. Hence there is a need for a subsequent trial aiming to answer these unresolved issues

  13. Traumatic aneurysms of the pericallosal arteries

    International Nuclear Information System (INIS)

    Nakstad, P.; Nornes, H.; Hauge, H.N.

    1986-01-01

    Of a total of 912 operated intracranial aneurysms only three were classified as traumatic (0.3%). They were found in children after severe head trauma and were all located on the pericallosal artery or its branches and not a bifurcations. Shearing forces between the falx, the arteries and the brain at the time of injury are held responsible for the development of these aneurysms. Unlike these traumatic aneurysms, 29 ''spontaneous'' pericallosal aneurysms (3.2%) in adults were located at the bifurcations of the artery. As significantly fewer reports of traumatic aneurysms have been published during the last decade than before 1976, it is suggested that some might have been overlooked as a consequence of CT replacing cerebral angiography in the neuroradiological evaluation of severe head injury. This possibility should be kept in mind, especially when dealing with children after head injury and when CT scans indicate brain damage around the falx. The possibility of overlooking traumatic pericallosal aneurysms is described by other authors and discussed further in this paper. (orig.)

  14. Aqueous foam toxicology evaluation and hazard review

    Energy Technology Data Exchange (ETDEWEB)

    Archuleta, M.M.

    1995-10-01

    Aqueous foams are aggregates of bubbles mechanically generated by passing air or other gases through a net, screen, or other porous medium that is wetted by an aqueous solution of surface-active foaming agents (surfactants). Aqueous foams are important in modem fire-fighting technology, as well as for military uses for area denial and riot or crowd control. An aqueous foam is currently being developed and evaluated by Sandia National Laboratories (SNL) as a Less-Than-Lethal Weapon for the National Institute of Justice (NIJ). The purpose of this study is to evaluate the toxicity of the aqueous foam developed for the NIJ and to determine whether there are any significant adverse health effects associated with completely immersing individuals without protective equipment in the foam. The toxicity of the aqueous foam formulation developed for NIJ is determined by evaluating the toxicity of the individual components of the foam. The foam is made from a 2--5% solution of Steol CA-330 surfactant in water generated at expansion ratios ranging from 500:1 to 1000:1. SteoI CA-330 is a 35% ammonium laureth sulfate in water and is produced by Stepan Chemical Company and containing trace amounts (<0.1%) of 1,4-dioxane. The results of this study indicate that Steol CA-330 is a non-toxic, mildly irritating, surfactant that is used extensively in the cosmetics industry for hair care and bath products. Inhalation or dermal exposure to this material in aqueous foam is not expected to produce significant irritation or systemic toxicity to exposed individuals, even after prolonged exposure. The amount of 1,4-dioxane in the surfactant, and subsequently in the foam, is negligible and therefore, the toxicity associated with dioxane exposure is not significant. In general, immersion in similar aqueous foams has not resulted in acute, immediately life-threatening effects, or chronic, long-term, non-reversible effects following exposure.

  15. Sorption of heteropoly acids by polyurethane foam

    International Nuclear Information System (INIS)

    Dmitreinko, S.G.; Goncharova, L.V.; Runov, V.K.; Zakharov, V.N.; Aslanova, L.A.

    1997-01-01

    Sorption of oxidized and reduced forms of molybdosilicic, molybdophosphoric and molybdovanadophosphoric acids by polyurethane foam based on ethers and esters is studied. On the basis of sorption dependence on solution pH, polyurethane foam type and spectral characteristics of sorbates the suggestion has been made that in the polyurethane foam phase there are two main types of sorbent-sorbate interaction: electrostatic (ion-ion) and with hydrogen bond formation: and it is impossible to determine the contribution of every interaction

  16. FoAM Kernow Activity Report 2016

    OpenAIRE

    Griffiths, Amber; Griffiths, David

    2016-01-01

    This review shows selected projects from the FoAM Kernow studio in 2016. FoAM is a network of transdisciplinary labs at the intersection of art, science, nature and everyday life. FoAM’s members are generalists - people who work across disparate fields in an entangled, speculative culture. Research and creative projects at FoAM combine elements of futurecrafting, citizen science, prototyping, experience design and process facilitation to re-imagine possible futures, and artistic experime...

  17. FoAM Kernow Activity Report 2017

    OpenAIRE

    Griffiths, Amber; Weatherill, Aidan; Griffiths, David

    2017-01-01

    This review shows selected projects from the FoAM Kernow studio in 2017. FoAM is a network of transdisciplinary labs at the intersection of art, science, nature and everyday life. FoAM’s members are generalists - people who work across disparate fields in an entangled, speculative culture. Research and creative projects at FoAM combine elements of futurecrafting, citizen science, prototyping, experience design and process facilitation to re-imagine possible futures.

  18. B-Plant canyon fire foam supply

    International Nuclear Information System (INIS)

    Gainey, T.

    1995-01-01

    A new raw water supply was installed for the B-Plant fire foam system. This document details tests to be performed which will demonstrate that the system can function as designed. The tests include: Verification of the operation of the automatic valves at the cells; Measurement of water flow and pressure downstream of the proportioner; Production of foam, and measurement of foam concentration. Included as an appendix is a copy of the work package resolution (J4 ampersand J4a)

  19. System Acquires Data On Reactivities Of Foams

    Science.gov (United States)

    Walls, Joe T.

    1994-01-01

    Data-acquisition and -plotting system, called DAPS(TM), developed enabling accurate and objective determination of physical properties related to reactivities of polyurethane and polyisocyanurate foams. Automated, computer-controlled test apparatus that acquires data on rates of rise, rise profiles, exothermic temperatures, and internal pressures of foams prepared from both manual and machine-mixed batches. Data used to determine minute differences between reaction kinetics and exothermic profiles of foam formulations, properties of end products which are statistically undifferentiated.

  20. Monitoring foam coarsening using a computer optical mouse as a ...

    Indian Academy of Sciences (India)

    Keywords. Aqueous foam; optical flow sensor; dynamic laser speckle; computer optical mouse. ... Aqueous foams are colloidal systems with high concentration of gas bubbles in a liquid matrix. ... and complex behaviour of the foams. However ...

  1. Starch/fiber/poly(lactic acid) foam and compressed foam composites

    Science.gov (United States)

    Composites of starch, fiber, and poly(lactic acid) (PLA) were made using a foam substrate formed by dehydrating starch or starch/fiber gels. PLA was infiltrated into the dry foam to provide better moisture resistance. Foam composites were compressed into plastics using force ranging from 4-76MPa. Te...

  2. Effect of foam stirrer design on the catalytic performance of rotating foam stirrer reactions

    NARCIS (Netherlands)

    Leon Matheus, M.A.; Geers, P.; Nijhuis, T.A.; Schaaf, van der J.; Schouten, J.C.

    2012-01-01

    The liquid–solid mass transfer rate in a rotating foam stirrer reactor and in a slurry reactor is studied using the hydrogenation of styrene as a model reaction. The rotating foam stirrer reactor is a novel type of multi-phase reactor where highly open-celled materials, solid foams, are used as a

  3. Role of foam drainage in producing protein aggregates in foam fractionation.

    Science.gov (United States)

    Li, Rui; Zhang, Yuran; Chang, Yunkang; Wu, Zhaoliang; Wang, Yanji; Chen, Xiang'e; Wang, Tao

    2017-10-01

    It is essential to obtain a clear understanding of the foam-induced protein aggregation to reduce the loss of protein functionality in foam fractionation. The major effort of this work is to explore the roles of foam drainage in protein aggregation in the entire process of foam fractionation with bovine serum albumin (BSA) as a model protein. The results show that enhancing foam drainage increased the desorption of BSA molecules from the gas-liquid interface and the local concentration of desorbed molecules in foam. Therefore, it intensified the aggregation of BSA in foam fractionation. Simultaneously, it also accelerated the flow of BSA aggregates from rising foam into the residual solution along with the drained liquid. Because enhancing foam drainage increased the relative content of BSA molecules adsorbed at the gas-liquid interface, it also intensified the aggregation of BSA during both the defoaming process and the storage of the foamate. Furthermore, enhancing foam drainage more readily resulted in the formation of insoluble BSA aggregates. The results are highly important for a better understanding of foam-induced protein aggregation in foam fractionation. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Thermal performance enhancement of erythritol/carbon foam composites via surface modification of carbon foam

    Science.gov (United States)

    Li, Junfeng; Lu, Wu; Luo, Zhengping; Zeng, Yibing

    2017-03-01

    The thermal performance of the erythritol/carbon foam composites, including thermal diffusivity, thermal capacity, thermal conductivity and latent heat, were investigated via surface modification of carbon foam using hydrogen peroxide as oxider. It was found that the surface modification enhanced the wetting ability of carbon foam surface to the liquid erythritol of the carbon foam surface and promoted the increase of erythritol content in the erythritol/carbon foam composites. The dense interfaces were formed between erythritol and carbon foam, which is due to that the formation of oxygen functional groups C=O and C-OH on the carbon surface increased the surface polarity and reduced the interface resistance of carbon foam surface to the liquid erythritol. The latent heat of the erythritol/carbon foam composites increased from 202.0 to 217.2 J/g through surface modification of carbon foam. The thermal conductivity of the erythritol/carbon foam composite before and after surface modification further increased from 40.35 to 51.05 W/(m·K). The supercooling degree of erythritol also had a large decrease from 97 to 54 °C. Additionally, the simple and effective surface modification method of carbon foam provided an extendable way to enhance the thermal performances of the composites composed of carbon foams and PCMs.

  5. Aneurysmal wall enhancement and perianeurysmal edema after endovascular treatment of unruptured cerebral aneurysms.

    LENUS (Irish Health Repository)

    Su, I-Chang

    2014-06-01

    Perianeurysmal edema and aneurysm wall enhancement are previously described phenomenon after coil embolization attributed to inflammatory reaction. We aimed to demonstrate the prevalence and natural course of these phenomena in unruptured aneurysms after endovascular treatment and to identify factors that contributed to their development.

  6. Influence of endoleaks on aneurysm volume and hemodynamics after endovascular aneurysm repair

    International Nuclear Information System (INIS)

    Pitton, M.B.; Welter, B.; Schmenger, P.; Thelen, M.; Dueber, C.; Neufang, A.

    2003-01-01

    Purpose: To evaluate the aneurysm volume and the intra-aneurysmatic pressure and maximal pressure pulse (dp/dtmax) in completely excluded aneurysms and cases with endoleaks. Materials and Methods: In 36 mongrel dogs, experimental autologous aneurysms were treated with stent-grafts. All aortic side branches were ligated in 18 cases (group I) but were preserved in group II (n=18). Aneurysm volumes were calculated from CT scans before and after intervention, and from follow-up CT scans at 1 week, 6 weeks and 6 months. Finally, for hemodynamic measurements, manometer-tipped catheters were introduced into the excluded aneurysm sac (group I and II), selectively in endoleaks (group II), and intraluminally for aortic reference measurement. Systemic hypertension was induced by volume load and pharmacologic stress. Pressure curves and dp/dt were simultaneously recorded and the ratios of aneurysm pressure to systemic reference pressure calculated. Results: At follow-up, type-II, endoleaks were excluded in all cases of group I by selective angiography. In contrast, endoleaks were evident in all cases of group II. Volumetric analysis of the aneurysms showed a benefit for group I with an improved aneurysm shrinkage: ΔVolume +0.08%, -1.62% and -9.76% at 1 week, 6 weeks and 6 months follow-up (median, group I), compared to +1.43%, +0.67%, and -4.04% (group II), p [de

  7. Defect generation during solidification of aluminium foams

    International Nuclear Information System (INIS)

    Mukherjee, M.; Garcia-Moreno, F.; Banhart, J.

    2010-01-01

    The reason for the frequent occurrence of cell wall defects in metal foams was investigated. Aluminium foams often expand during solidification, a process which is referred as solidification expansion (SE). The effect of SE on the structure of aluminium foams was studied in situ by X-ray radioscopy and ex situ by X-ray tomography. A direct correlation between the magnitude of SE and the number of cell wall ruptures during SE and finally the number of defects in the solidified foams was found.

  8. New Spin Foam Models of Quantum Gravity

    Science.gov (United States)

    Miković, A.

    We give a brief and a critical review of the Barret-Crane spin foam models of quantum gravity. Then we describe two new spin foam models which are obtained by direct quantization of General Relativity and do not have some of the drawbacks of the Barret-Crane models. These are the model of spin foam invariants for the embedded spin networks in loop quantum gravity and the spin foam model based on the integration of the tetrads in the path integral for the Palatini action.

  9. AC induction field heating of graphite foam

    Science.gov (United States)

    Klett, James W.; Rios, Orlando; Kisner, Roger

    2017-08-22

    A magneto-energy apparatus includes an electromagnetic field source for generating a time-varying electromagnetic field. A graphite foam conductor is disposed within the electromagnetic field. The graphite foam when exposed to the time-varying electromagnetic field conducts an induced electric current, the electric current heating the graphite foam. An energy conversion device utilizes heat energy from the heated graphite foam to perform a heat energy consuming function. A device for heating a fluid and a method of converting energy are also disclosed.

  10. Foam-like structure of the Universe

    International Nuclear Information System (INIS)

    Kirillov, A.A.; Turaev, D.

    2007-01-01

    On the quantum stage space-time had the foam-like structure. When the Universe cools, the foam structure tempers and does not disappear. We show that effects caused by the foamed structure mimic very well the observed Dark Matter phenomena. Moreover, we show that in a foamed space photons undergo a chaotic scattering and together with every discrete source of radiation we should observe a diffuse halo. We show that the distribution of the diffuse halo of radiation around a point-like source repeats exactly the distribution of dark matter around the same source, i.e., the DM halos are sources of the diffuse radiation

  11. Foam-like structure of the Universe

    Energy Technology Data Exchange (ETDEWEB)

    Kirillov, A.A. [Institute for Applied Mathematics and Cybernetics, 10 Ulyanova str., Nizhny Novgorod 603005 (Russian Federation)], E-mail: ka98@mail.ru; Turaev, D. [Ben-Gurion University of the Negev, P.O.B. 653, Beer-Sheva 84105 (Israel)

    2007-11-15

    On the quantum stage space-time had the foam-like structure. When the Universe cools, the foam structure tempers and does not disappear. We show that effects caused by the foamed structure mimic very well the observed Dark Matter phenomena. Moreover, we show that in a foamed space photons undergo a chaotic scattering and together with every discrete source of radiation we should observe a diffuse halo. We show that the distribution of the diffuse halo of radiation around a point-like source repeats exactly the distribution of dark matter around the same source, i.e., the DM halos are sources of the diffuse radiation.

  12. Controlling of density uniformity of polyacrylate foams

    International Nuclear Information System (INIS)

    Shan Wenwen; Yuan Baohe; Wang Yanhong; Xu Jiayun; Zhang Lin

    2010-01-01

    The density non-uniformity existing in most low-density foams will affect performance of the foams. The trimethylolpropane trimethacrylate (TMPTA) foam targets were prepared and controlling methods of the foams, density uniformity were explored together with its forming mechanism. It has been found that the UV-light with high intensity can improve the distribution uniformity of the free radicals induced by UV photons in the solvents, thus improve the density uniformity of the foams. In addition, container wall would influence the concentration distribution of the solution, which affects the density uniformity of the foams. Thus, the UV-light with high intensity was chosen together with polytetrafluoroethylene molds instead of glass molds to prepare the foams with the density non-uniformity less than 10%. β-ray detection technology was used to measure the density uniformity of the TMPTA foams with the density in the range of 10 to 100 mg · cm -3 , and the results show that the lower the foam density is, the worse the density uniformity is. (authors)

  13. Faraday instability at foam-water interface.

    Science.gov (United States)

    Bronfort, A; Caps, H

    2012-12-01

    A nearly two-dimensional foam is generated inside a Hele-shaw cell and left at rest on its liquid bath. The system is then vertically shaken and, above a well-defined acceleration threshold, surface waves appear at the foam-liquid interface. Those waves are shown to be subharmonic. The acceleration threshold is studied and compared to the common liquid-gas case, emphasizing the energy dissipation inside the foam. An empirical model is proposed for this energy loss, accounting for the foam characteristics such as the bubble size but also the excitation parameter, namely the linear velocity.

  14. Penggunaan Media Presentase Microsoft Power Point Untuk Meningkatkan Hasil Belajar IPS Terpadu Pada Siswa Kelas VIII a SMP Negeri 2 Tanantovea

    OpenAIRE

    Hitler, Ahmad

    2014-01-01

    Permasalahan yang diangkat dalam penelitian adalah apakah dengan penggunaan media Presentase Microsoft Power Point pada mata pembelajaran IPS Terpadu dapat meningkatkan hasil belajar siswa kelas VIII A di SMP Negeri 2 Tanantovea. Penelitian ini bertujuan untuk meningkatkan hasil belajar siswa pada pokok bahasan Kolonialisme dan Imperialisme Barat di kelas VIII A SMP Negeri 2 Tanantovea. Penelitian ini dilakukan dalam 2 siklus, setiap siklus terdiri dari perencanaan, pelaksanaan tindakan, obs...

  15. State-of-the-Art Review on the Characteristics of Surfactants and Foam from Foam Concrete Perspective

    Science.gov (United States)

    Sahu, Sritam Swapnadarshi; Gandhi, Indu Siva Ranjani; Khwairakpam, Selija

    2018-06-01

    Foam concrete finds application in many areas, generally as a function of its relatively lightweight and its beneficial properties in terms of reduction in dead load on structure, excellent thermal insulation and contribution to energy conservation. For production of foam concrete with desired properties, stable and good quality foam is the key requirement. It is to be noted that the selection of surfactant and foam production parameters play a vital role in the properties of foam which in turn affects the properties of foam concrete. However, the literature available on the influence of characteristics of foaming agent and foam on the properties of foam concrete are rather limited. Hence, a more systematic research is needed in this direction. The focus of this work is to provide a review on characteristics of surfactant (foaming agent) and foam for use in foam concrete production.

  16. Case Series of Ruptured Jamaican Berry Aneurysms Four Decades ...

    African Journals Online (AJOL)

    Having bled, the aneurysms exposed themselves by causing sudden severe headaches, and various neurological problems, depending on their locations. We found more females than males. The posterior communicating artery aneurysm was predominant. There were no cerebro-vascular spasms postoperatively.

  17. Aneurysm shape reconstruction from biplane angiograms in the ISUIA collection

    NARCIS (Netherlands)

    Raghavan, Madhavan L; Sharda, Gaurav V; Huston, John; Mocco, J; Capuano, Ana W; Torner, James C; Saha, Punam K; Meissner, Irene; Brown, Robert D; Groen, Rob

    The International Study of Unruptured Intracranial Aneurysms (ISUIA) is an epidemiologic international study of the natural history of unruptured intracranial aneurysms that enrolled 4,060 subjects. A conventional biplane cerebral angiogram available for central review was required for enrollment

  18. Aneurysmal bone cyst primary - about eight pediatric cases ...

    African Journals Online (AJOL)

    The aneurysmal bone cyst is a pseudotumoral lesion that can take several aspects. ... specific forms and atypical aneurysmal bone cyst which often pose a diagnostic challenge requiring radiological ... All patients had standard radiographs.

  19. Impact of Aneurysm Projection on Intraoperative Complications During Surgical Clipping of Ruptured Posterior Communicating Artery Aneurysms.

    Science.gov (United States)

    Fukuda, Hitoshi; Hayashi, Kosuke; Yoshino, Kumiko; Koyama, Takashi; Lo, Benjamin; Kurosaki, Yoshitaka; Yamagata, Sen

    2016-03-01

    Surgical clipping of ruptured posterior communicating artery (PCoA) aneurysms is a well-established procedure to date. However, preoperative factors associated with procedure-related risk require further elucidation. To investigate the impact of the direction of aneurysm projection on the incidence of procedure-related complications during surgical clipping of ruptured PCoA aneurysms. A total of 65 patients with ruptured PCoA aneurysms who underwent surgical clipping were retrospectively analyzed from a single-center, prospective, observational cohort database in this study. The aneurysms were categorized into lateral and posterior projection groups, depending on direction of the dome. Characteristics and operative findings of each projection group were identified. We also evaluated any correlation of aneurysm projection with the incidence of procedure-related complications. Patients with ruptured PCoA aneurysms with posterior projection more likely presented with good-admission-grade subarachnoid hemorrhage (P = .01, χ test) and were less to also have intracerebral hematoma (P = .01). These aneurysms were found to be associated with higher incidence of intraoperative rupture (P = .02), complex clipping with fenestrated clips (P = .02), and dense adherence to PCoA or its perforators (P = .04) by univariate analysis. Aneurysms with posterior projection were also correlated with procedure-related complications, including postoperative cerebral infarction or hematoma formation (odds ratio, 5.87; 95% confidence interval, 1.11-31.1; P = .04) by multivariable analysis. Ruptured PCoA aneurysms with posterior projection carried a higher risk of procedure-related complications of surgical clipping than those with lateral projection.

  20. Surgical management of recurrent intracranial aneurysms after embolization

    Directory of Open Access Journals (Sweden)

    Hua-wei WANG

    2015-03-01

    Full Text Available Background Endovascular therapy is the first treatment choice for intracranial aneurysms currently, but it has a high recurrence rate. Some patients require surgical clipping because of the difficulty of re-embolization. This study retrospectively analyzed the clinical data of 11 cases who underwent clipping operation because of the recurrence after endovascular therapy. Combining with domestic and foreign related literatures, this paper discusses the principles and techniques of surgical treatment for recurrent aneurysms.  Methods There were a total of 11 patients with 12 recurrent aneurysms after embolization, including 3 anterior communicating artery (ACoA aneurysms, 3 middle cerebral artery (MCA aneurysms, 2 posterior communicating artery (PCoA aneurysms, one anterior cerebral artery (ACA aneurysm, one vertebral artery (VA aneurysm, one basilar tip aneurysm and one superior cerebellar artery (SCA aneurysm. There were 7 small aneurysms and 4 large aneurysms. All patients underwent surgical clipping under microscope. After operation, 11 aneurysms were complete clipped, and one was proximally blocked. The coils were reserved in 7 aneurysms, and were removed or partially removed in 5 aneurysms.  Results All patients were followed up for an average of 22 months after surgery. There were 9 cases (9/11 with the Glasgow Outcome Scale (GOS score improved or remaining unchanged compared with preoperation. One of them presented left limb weakness after operation, with the muscle strength Grade 3, while recovered to Grade 4-5 on discharge. The other 2 patients died after surgery. One case had a critical condition before surgery, and the other was secondary to thrombosis and pneumonia. Both of them had a GOS score of 2 when discharged, and died after discharge.  Conclusions There is high surgical difficulty in recurrent aneurysms, however, with adequate preoperative evaluation and surgical design, it can still promise safe and effective results

  1. Rupture of popliteal arterial aneurysm due to salmonella infection

    International Nuclear Information System (INIS)

    Kim, Dong Hun; Oh, Hyung Woo; Kim, Dong Hyun; Byun, Joo Nam

    2006-01-01

    We report here on a case of popliteal aneurysm and rupture that occurred over a 10-day period and this was all secondary to salmonella infection. Computed tomography (CT) angiography of the extremity that was performed before and after aneurysmal rupture showed the aneurysm's rapid evolution to rupture over a short period of time. We also review the pathogenesis, clinical presentation, diagnostic approach and management of salmonella aneurysms

  2. Greater saphenous vein anomaly and aneurysm with subsequent pulmonary embolism

    OpenAIRE

    Ma, Truong; Kornbau, Craig

    2017-01-01

    Abstract Venous aneurysms often present as painful masses. They can present either in the deep or superficial venous system. Deep venous system aneurysms have a greater risk of thromboembolism. Though rare, there have been case reports of superficial aneurysms and thrombus causing significant morbidity such as pulmonary embolism. We present a case of an anomalous greater saphenous vein connection with an aneurysm and thrombus resulting in a pulmonary embolism. This is the only reported case o...

  3. Hypertrophic cardiomyopathy with mid-ventricular obstruction and apical aneurysm

    Directory of Open Access Journals (Sweden)

    N.D. Oryshchyn

    2016-11-01

    Full Text Available A case report of apical left ventricular aneurysm in patient with hypertrophic cardiomyopathy with mid-ventricular obstruction (diagnosis and surgical treatment is presented. We revealed apical aneurysm and mid-ventricular obstruction during echocardiography and specified anatomical characteristics of aneurysm during computer tomography. There was no evidence of obstructive coronary artery disease during coronary angiography. Taking into consideration multiple cerebral infarcts, aneurysm resection and left ventricular plastics was performed. Electronic microscopy of myocardium confirmed the diagnosis of hypertrophic cardiomyopathy.

  4. New decontamination process using foams containing particles

    International Nuclear Information System (INIS)

    Guignot, S.; Faure, S.

    2008-01-01

    One key point in the dismantling of nuclear facilities is the thorough cleaning of radiation- exposed surfaces on which radioactive deposits have formed. This cleaning step is often achieved by successive liquid rinses with specific solutions containing alkaline, acidic, or even oxidizing species depending on whether the aim is to dissolve greasy deposits (like ter-butylphosphate) or to corrode surfaces on micrometric thicknesses. An alternative process to reduce the amount of chemicals and the volume of the resulting nuclear wastes consists in using the same but foamed solutions (1). Carrying less liquid, the resulting foams still display similar kinetics of dissolution rates and their efficiency is determined by their ability to hold sufficient wetnesses during the time required for the decontamination. Classical foam decontamination process illustrated by foam pulverization or circulation in the 90 turned five years ago into a specific static process using high-lifetime viscosified foam at a steady state. One way to slow down the liquid drainage is to raise liquid viscosity by adding organic viscosifiers like xanthan gum (2). In 2005, new studies started on an innovative process proposed by S. Faure and based on triphasic foams containing particles [3]. The aim is to generate new decontamination foams containing less quantities of organics materials (surfactants and viscosifiers). Silica particles are obviously known to stabilize or destabilize foams (4). In the frame of S. Guignot Ph.D., new fundamental studies are initiated in order to clarify the role of silica solid microparticles in these foams. Our final goal is to determine whether this kind of new foam can be stable for several hours for a decontamination process. The results we will report focus on wet foams used for nuclear decontamination and incorporating fumed silica. The study is conducted on a vertical foam column in a pseudo-free drainage configuration, and aims at investigating the influence of

  5. Epidemiology and genetics of intracranial aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Caranci, F., E-mail: ferdinandocaranci@libero.it [Unit of Neuroradiology, Department of Diagnostic Radiology and Radiotherapy, Federico II University, Naples (Italy); Briganti, F., E-mail: frabriga@unina.it [Unit of Neuroradiology, Department of Diagnostic Radiology and Radiotherapy, Federico II University, Naples (Italy); Cirillo, L.; Leonardi, M. [Neuroradiology service, Bellaria Hospital, Bologna (Italy); Muto, M., E-mail: mutomar@tiscali.it [Neuroradiology Service Cardarelli Hospital Naples (Italy)

    2013-10-01

    Intracranial aneurysms are acquired lesions (5–10% of the population), a fraction of which rupture leading to subarachnoid hemorrhage with devastating consequences. Until now, the exact etiology of intracranial aneurysms formation remains unclear. The low incidence of subarachnoid hemorrhage in comparison with the prevalence of unruptured IAs suggests that the vast majority of intracranial aneurysms do not rupture and that identifying those at highest risk is important in defining the optimal management. The most important factors predicting rupture are aneurysm size and site. In addition to ambiental factors (smoking, excessive alcohol consumption and hypertension), epidemiological studies have demonstrated a familiar influence contributing to the pathogenesis of intracranial aneurysms, with increased frequency in first- and second-degree relatives of people with subarachnoid hemorrhage. In comparison to sporadic aneurysms, familial aneurysms tend to be larger, more often located at the middle cerebral artery, and more likely to be multiple. Other than familiar occurrence, there are several heritable conditions associated with intracranial aneurysm formation, including autosomal dominant polycystic kidney disease, neurofibromatosis type I, Marfan syndrome, multiple endocrine neoplasia type I, pseudoxanthoma elasticum, hereditary hemorrhagic telangiectasia, and Ehlers-Danlos syndrome type II and IV. The familial occurrence and the association with heritable conditions indicate that genetic factors may play a role in the development of intracranial aneurysms. Genome-wide linkage studies in families and sib pairs with intracranial aneurysms have identified several loci on chromosomes showing suggestive evidence of linkage, particularly on chromosomes 1p34.3–p36.13, 7q11, 19q13.3, and Xp22. For the loci on 1p34.3–p36.13 and 7q11, a moderate positive association with positional candidate genes has been demonstrated (perlecan gene, elastin gene, collagen type 1 A2

  6. Epidemiology and genetics of intracranial aneurysms

    International Nuclear Information System (INIS)

    Caranci, F.; Briganti, F.; Cirillo, L.; Leonardi, M.; Muto, M.

    2013-01-01

    Intracranial aneurysms are acquired lesions (5–10% of the population), a fraction of which rupture leading to subarachnoid hemorrhage with devastating consequences. Until now, the exact etiology of intracranial aneurysms formation remains unclear. The low incidence of subarachnoid hemorrhage in comparison with the prevalence of unruptured IAs suggests that the vast majority of intracranial aneurysms do not rupture and that identifying those at highest risk is important in defining the optimal management. The most important factors predicting rupture are aneurysm size and site. In addition to ambiental factors (smoking, excessive alcohol consumption and hypertension), epidemiological studies have demonstrated a familiar influence contributing to the pathogenesis of intracranial aneurysms, with increased frequency in first- and second-degree relatives of people with subarachnoid hemorrhage. In comparison to sporadic aneurysms, familial aneurysms tend to be larger, more often located at the middle cerebral artery, and more likely to be multiple. Other than familiar occurrence, there are several heritable conditions associated with intracranial aneurysm formation, including autosomal dominant polycystic kidney disease, neurofibromatosis type I, Marfan syndrome, multiple endocrine neoplasia type I, pseudoxanthoma elasticum, hereditary hemorrhagic telangiectasia, and Ehlers-Danlos syndrome type II and IV. The familial occurrence and the association with heritable conditions indicate that genetic factors may play a role in the development of intracranial aneurysms. Genome-wide linkage studies in families and sib pairs with intracranial aneurysms have identified several loci on chromosomes showing suggestive evidence of linkage, particularly on chromosomes 1p34.3–p36.13, 7q11, 19q13.3, and Xp22. For the loci on 1p34.3–p36.13 and 7q11, a moderate positive association with positional candidate genes has been demonstrated (perlecan gene, elastin gene, collagen type 1 A2

  7. Foam Assisted WAG, Snorre Revisit with New Foam Screening Model

    DEFF Research Database (Denmark)

    Spirov, Pavel; Rudyk, Svetlana Nikolayevna; Khan, Arif

    2012-01-01

    This study deals with simulation model of Foam Assisted Water Alternating Gas (FAWAG) method that had been implemented to two Norwegian Reservoirs. Being studied on number of pilot projects, the method proved successful, but Field Scale simulation was never understood properly. New phenomenological...... of the simulation contributes to more precise planning of the schedule of water and gas injection, prediction of the injection results and evaluation of the method efficiency. The testing of the surfactant properties allows making grounded choice of surfactant to use. The analysis of the history match gives insight...

  8. Pengaruh Cyberbullying Di Media Sosial Terhadap Perilaku Reaktif Sebagai Pelaku Maupun Sebagai Korban Cyberbullying Pada Siswa Kristen SMP Nasional Makassar

    Directory of Open Access Journals (Sweden)

    Mira Marleni Pandie

    2016-03-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui pengaruh cyberbullying  terhadap perilaku reaktif sebagai pelaku sekaligus sebagai korban cyberbullying pada siswa. Penelitian yang digunakan adalah penelitian kuantitatif dengan menggunakan metode survei dengan mengambil sampel sebanyak 40 orang dari SMP Nasional Kota Makassar. Siswa yang dimaksud dalam penelitian ini adalah siswa SMP kelas VII sampai kelas IX karena tanggap terhadap teknologi dan  pada masa ini terjadi perubahan secara fisik dan psikis yang membawa siswa pada suatu fase yang disebut masa transisi, labil, mencari identitas dan mencari public figure. Hasil dari penelitian ini adalah terbuktinya hipotesis bahwa ada pengaruh antara perilaku pelaku cyberbullying dengan perilaku reaktif siswa Kristen korban cyberbullying dengan signifikansi 0,037<0,05. Dengan demikian jelas bahwa bila makin tinggi perilaku reaktif pelaku maka makin tinggi pula perilaku reaktif korban. Semakin rendah perilaku reaktif pelaku maka makin rendah pula perilaku reaktif korban cyberbullying.  

  9. Advances in endovascular aneurysm treatment: are we making a difference?

    International Nuclear Information System (INIS)

    Katz, Jeffrey M.; Ougorets, Igor; Tsiouris, Apostolos J.; Biondi, Alessandra; Salvaggio, Kimberly A.; Gobin, Y. Pierre; Stieg, Philip E.; Riina, Howard A.

    2005-01-01

    Recent advancements in endovascular aneurysm repair, including bioactive and expansile coils and intracranial stents, hold promise for improved aneurysm occlusion rates. We report the immediate and midterm clinical and angiographic outcomes of a consecutive series of patients treated since the advent of these technologies. Clinical and radiological records of 134 patients with 142 aneurysms treated between 2001 and 2004 were retrospectively evaluated by an independent neurologist. Endovascular procedures were analyzed by an independent neuroradiologist blinded to all clinical information. Seventy-two ruptured and 60 un-ruptured saccular aneurysms, nine fusiform and one post-traumatic aneurysm were treated. Matrix coils were used in 53% of saccular aneurysms and HydroCoils in 13% of all aneurysms. Neuroform stents were deployed in 19% of aneurysms. Angiographic total or subtotal occlusion was achieved in 76% of cases and in 96% at last follow-up. Aneurysm recanalization was observed in 14% over a mean follow-up of 12 months, and 18% of aneurysms were retreated. Clinically relevant complications occurred in 6.0%, resulting in procedure-related morbidity of 0.6% and 0.6% mortality at 6 months. No aneurysm bled over a cumulative 1,347 months of observation. Newer embolization technologies can be exploited successfully even in more complex aneurysms with very low morbidity and mortality. (orig.)

  10. Natural history of cerebral saccular aneurysms | Ojini | West African ...

    African Journals Online (AJOL)

    Aneurysms less than 5mm have a very low rupture rate while those greater than 10mm have a significant risk of subsequent rupture. There is no consensus on the influence of the other reported risk factors such as hypertension, cigarette smoking and aneurysm location, on aneurysmal rupture. Those who have suffered a ...

  11. Renovascular hypertension and intrarenal artery aneurysms in a preschool child

    International Nuclear Information System (INIS)

    Hobbs, David J.; Barletta, Gina-Marie; Bunchman, Timothy E.; Mowry, Jeanne A.

    2009-01-01

    Renovascular hypertension from renal artery aneurysmal formation is a rare complication of fibromuscular dysplasia. Few data exist to direct the management of intrarenal artery aneurysms in pediatric patients. We report the presentation, diagnosis and management of renovascular hypertension and intrarenal aneurysmal disease in a preschool child. (orig.)

  12. Renovascular hypertension and intrarenal artery aneurysms in a preschool child

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, David J.; Barletta, Gina-Marie; Bunchman, Timothy E. [Michigan State University College of Human Medicine, Grand Rapids, MI (United States); Helen DeVos Children' s Hospital, Pediatric Nephrology, Dialysis and Transplantation, Grand Rapids, MI (United States); Mowry, Jeanne A. [Oregon Health Sciences University, Pediatric Nephrology, Northwest Permanente, P.C. and Doernbecher Children' s Hospital, Portland, OR (United States)

    2009-09-15

    Renovascular hypertension from renal artery aneurysmal formation is a rare complication of fibromuscular dysplasia. Few data exist to direct the management of intrarenal artery aneurysms in pediatric patients. We report the presentation, diagnosis and management of renovascular hypertension and intrarenal aneurysmal disease in a preschool child. (orig.)

  13. Analysis of Influence of Foaming Mixture Components on Structure and Properties of Foam Glass

    Science.gov (United States)

    Karandashova, N. S.; Goltsman, B. M.; Yatsenko, E. A.

    2017-11-01

    It is recommended to use high-quality thermal insulation materials to increase the energy efficiency of buildings. One of the best thermal insulation materials is foam glass - durable, porous material that is resistant to almost any effect of substance. Glass foaming is a complex process depending on the foaming mode and the initial mixture composition. This paper discusses the influence of all components of the mixture - glass powder, foaming agent, enveloping material and water - on the foam glass structure. It was determined that glass powder is the basis of the future material. A foaming agent forms a gas phase in the process of thermal decomposition. This aforementioned gas foams the viscous glass mass. The unreacted residue thus changes a colour of the material. The enveloping agent slows the foaming agent decomposition preventing its premature burning out and, in addition, helps to accelerate the sintering of glass particles. The introduction of water reduces the viscosity of the foaming mixture making it evenly distributed and also promotes the formation of water gas that additionally foams the glass mass. The optimal composition for producing the foam glass with the density of 150 kg/m3 is defined according to the results of the research.

  14. dsmcFoam+: An OpenFOAM based direct simulation Monte Carlo solver

    Science.gov (United States)

    White, C.; Borg, M. K.; Scanlon, T. J.; Longshaw, S. M.; John, B.; Emerson, D. R.; Reese, J. M.

    2018-03-01

    dsmcFoam+ is a direct simulation Monte Carlo (DSMC) solver for rarefied gas dynamics, implemented within the OpenFOAM software framework, and parallelised with MPI. It is open-source and released under the GNU General Public License in a publicly available software repository that includes detailed documentation and tutorial DSMC gas flow cases. This release of the code includes many features not found in standard dsmcFoam, such as molecular vibrational and electronic energy modes, chemical reactions, and subsonic pressure boundary conditions. Since dsmcFoam+ is designed entirely within OpenFOAM's C++ object-oriented framework, it benefits from a number of key features: the code emphasises extensibility and flexibility so it is aimed first and foremost as a research tool for DSMC, allowing new models and test cases to be developed and tested rapidly. All DSMC cases are as straightforward as setting up any standard OpenFOAM case, as dsmcFoam+ relies upon the standard OpenFOAM dictionary based directory structure. This ensures that useful pre- and post-processing capabilities provided by OpenFOAM remain available even though the fully Lagrangian nature of a DSMC simulation is not typical of most OpenFOAM applications. We show that dsmcFoam+ compares well to other well-known DSMC codes and to analytical solutions in terms of benchmark results.

  15. Preparation of three-dimensional shaped aluminum alloy foam by two-step foaming

    International Nuclear Information System (INIS)

    Shang, J.T.; Xuming, Chu; Deping, He

    2008-01-01

    A novel method, named two-step foaming, was investigated to prepare three-dimensional shaped aluminum alloy foam used in car industry, spaceflight, packaging and related areas. Calculations of thermal decomposition kinetics of titanium hydride showed that there is a considerable amount of hydrogen releasing when the titanium hydride is heated at a relatively high temperature after heated at a lower temperature. The hydrogen mass to sustain aluminum alloy foam, having a high porosity, was also estimated by calculations. Calculations indicated that as-received titanium hydride without any pre-treatment can be used as foaming agents in two-step foaming. The processes of two-step foaming, including preparing precursors and baking, were also studied by experiments. Results showed that, low titanium hydride dispersion temperature, long titanium hydride dispersion time and low precursors porosity are beneficial to prepare three-dimensional shaped aluminum alloy foams with uniform pores

  16. Persepsi Siswa terhadap Komunikasi Guru Pembimbing dalam Pelaksanaan Layanan Informasi (Studi Deskriptif terhadap Siswa SMP N 26 Padang

    Directory of Open Access Journals (Sweden)

    ines novianti

    2013-03-01

    Full Text Available In fact at the school execution of information service less is effective caused by perception of student to communications teacher counsellor. Target of research lay open perception of student to communications teacher counsellor in execution of information service in SMP N 26 Field. This Research use quantitative approach of descriptive type, intake of Stratified Sampling sampel. result of research indicate that perception of student to communications teacher counsellor in execution of good enough information service

  17. Faktor-Faktor yang Memengaruhi Asertifitas Remaja dalam Perilaku Seksual di SMP Negeri 1 Hinai Kabupaten Langkat Tahun 2013

    OpenAIRE

    Humaira, Wardati

    2015-01-01

    Sexual behavior in teenagers tends to be increasing. One of the life skills needed to be applied by the teenagers is the skill of how to be assertive. The factors influencing the assertiveness are culture, self-esteem, parents’ parenting pattern, peers, knowledge, self-efficacy, and information media. The purpose of this study was to find out the factors influencing the teenagers’ assertiveness in sexual behavior at SMP (Junior High School) Negeri I Hinai, Langkat District, in 2013. The po...

  18. PENINGKATAN AKTIVITAS DAN HASIL BELAJAR SISWA SMP MELALUI MODEL PEMBELAJARAN KOOPERATIF TIPE STUDENT TEAMS ACHIEVEMENT DIVISION DENGAN METODE EKSPERIMEN

    Directory of Open Access Journals (Sweden)

    Muhammad Dian Hadi Kesuma

    2013-12-01

    Full Text Available The objectives in these studies are (1 determine the activity of theeighth grade students of SMP 2 Labuan Deli in learning activities using an experimental method of inquiry. (2 Determine the increased student’s activityin class VIII of SMP Negeri 2 Labuan Deli in solving physics problems after applied the experimental method. This study is a classroom action research. Research subject is class VIII SMP 2 Semester 2 Labuan Deli T.P 2012/2013numbered 31 students consisting of 13 men and 18 women. Object of thisresearch is to apply the learning peruses STAD cooperative learning modelthrough experimental methods. This result show (1 There is an increase instudent learning outcomes Junior High School eighth grade 2 Labuan Deli isshown from: (a the results of tests of student learning in the first cycle,namely: mean = 58.92 with the percentage of completeness = 19.36%; (btests of student learning outcomes in the second cycle is the average 75.70,percentage of completeness = 58.92%. Completeness percentage increased by61.24% and 0.41 normalized gain index or criteria being. (2 There is anincrease in the activity of the eighth grade students of SMP Negeri 2 LabuanDeli is shown from the first cycle only average 65.60 and 81.65 in the secondcycle. The results of this study can be used as input for teachers in an effort toincrease the activity and student learning outcomes by applying experimentalmethods.

  19. A Method to Produce Foam Glasses

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention relates to a production process of foam glass from a mixture of glass cullet or slag or fly ash with a foaming agent and an oxidizing agent and heating to below 1100 C under low oxygen atmosphere. The invention relates more particularly to a process wherein pure carbon or a ...

  20. Anti-foam System design description

    International Nuclear Information System (INIS)

    White, M.A.

    1994-01-01

    The Anti-foam System is a sub-system of the 242-A Evaporator facility. The Anti-foam is used within the C-A-1 Vapor-Liquid Separator, to reduce the effect of foaming and reduce fluid bumping while the vapor and liquid are separated within the C-A-1 Vapor-Liquid Separator. Excessive foaming within the vessel may possibly cause the liquid slurry mixture in the evaporator vessel to foul the de-entrainment pads and cause plant shutdown. The Anti-foam System consists of the following primary elements: the Anti-foam Tank and the Metering Pump. The upgrades to Anti-foam System include the following: installation of a new pump, instruments, and valves; and connection of the instruments, pump and agitator associated with the Anti-foam System to the Monitoring and Control System (MCS). The 242-A Evaporator is a waste treatment facility designed to reduce liquid waste volumes currently stored in the Hanford Area double shell Waste Storage Tanks. The evaporator uses evaporative concentration to achieve this volume reduction, returning the concentrated slurry to the double-shell tanks for storage and, at the same time, releasing the process effluent to a retention facilities for eventual treatment and release to the environment

  1. Application of Auxetic Foam in Sports Helmets

    Directory of Open Access Journals (Sweden)

    Leon Foster

    2018-03-01

    Full Text Available This investigation explored the viability of using open cell polyurethane auxetic foams to augment the conformable layer in a sports helmet and improve its linear impact acceleration attenuation. Foam types were compared by examining the impact severity on an instrumented anthropomorphic headform within a helmet consisting of three layers: a rigid shell, a stiff closed cell foam, and an open cell foam as a conformable layer. Auxetic and conventional foams were interchanged to act as the helmet’s conformable component. Attenuation of linear acceleration was examined by dropping the combined helmet and headform on the front and the side. The helmet with auxetic foam reduced peak linear accelerations (p < 0.05 relative to its conventional counterpart at the highest impact energy in both orientations. Gadd Severity Index reduced by 11% for frontal impacts (38.9 J and 44% for side impacts (24.3 J. The conformable layer within a helmet can influence the overall impact attenuating properties. The helmet fitted with auxetic foam can attenuate impact severity more than when fitted with conventional foam, and warrants further investigation for its potential to reduce the risk of traumatic brain injuries in sport specific impacts.

  2. Foam is a decon waste minimization tool

    International Nuclear Information System (INIS)

    Peterson, K.D.; McGlynn, J.F.; Rankin, W.N.

    1991-01-01

    The use of foam in decontamination operations offers significant reductions in waste generation. Initial use has confirmed its effectiveness. Issues being resolved at Savannah River Site (SRS) include compatibility of foam generating solutions with decontamination solutions, waste disposal, and operational safety

  3. Industrial waste utilization for foam concrete

    Science.gov (United States)

    Krishnan, Gokul; Anand, K. B.

    2018-02-01

    Foam concrete is an emerging and useful construction material - basically a cement based slurry with at least 10% of mix volume as foam. The mix usually containing cement, filler (usually sand) and foam, have fresh densities ranging from 400kg/m3 to 1600kg/m3. One of the main drawbacks of foam concrete is the large consumption of fine sand as filler material. Usage of different solid industrial wastes as fillers in foam concrete can reduce the usage of fine river sand significantly and make the work economic and eco-friendly. This paper aims to investigate to what extent industrial wastes such as bottom ash and quarry dust can be utilized for making foam concrete. Foam generated using protein based agent was used for preparing and optimizing (fresh state properties). Investigation to find the influence of design density and air-void characteristics on the foam concrete strength shows higher strength for bottom ash mixes due to finer air void distribution. Setting characteristics of various mix compositions are also studied and adoption of Class C flyash as filler demonstrated capability of faster setting.

  4. Damping of liquid sloshing by foams

    Science.gov (United States)

    Sauret, A.; Boulogne, F.; Cappello, J.; Dressaire, E.; Stone, H. A.

    2015-02-01

    When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the damping coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus, we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines.

  5. Low-density carbonized resorcinol-formaldehyde foams

    International Nuclear Information System (INIS)

    Kong, F.M.; Buckley, S.R.; Giles, C.L. Jr.; Haendler, B.L.; Hair, L.M.; Letts, S.A.; Overturf, G.E. III; Price, C.W.; Cook, R.C.

    1991-01-01

    This report documents research and development on resorcinol- formaldehyde-based foam materials conducted between 1986 and June 1990, when the effort was discontinued. The foams discussed are resorcinol-formaldehyde (RF) foam, carbonized RF (CRF) foam, and two composite foams, a polystyrene/RF (PS/RF) foam and its carbonized derivative (CPR). The RF foams are synthesized by the polycondensation of resorcinol with formaldehyde in a slightly basic solution. Their structure and density depend strongly on the concentration of the sodium carbonate catalyst. The have an interconnected bead structure similar to that of silica aerogels; bead sizes range from 30 to 130 Angstrom, and cell sizes are less than 0.1 μm. We have achieved densities of 16 to 200 mg/cm 3 . The RF foams can be pyrolyzed in an inert atmosphere to form a vitreous carbon foam (CRF), which has a similar microstructure but much higher mechanical strength. The PS/RF foams are obtained by filling the 2- to 3-μm cells of PS foam (a low-density hydrocarbon foam we have developed) with RF. The resultant foams have the outstanding handling and machinability of the PS foam matrix and the small cell size of RF. Pyrolyzing PS/RF foams causes depolymerization and loss of the PS; the resulting CPR foams have a structure similar to the PS foams in which CRF both replicates and fills the PS cells

  6. Profil Penalaran Proporsional Siswa SMP dalam Memecahkan Masalah Matematika Berdasarkan Gaya Kognitif Sistematis dan Intuitif

    Directory of Open Access Journals (Sweden)

    Akhmad Faisal Hidayat

    2017-12-01

    Full Text Available Penelitian ini merupakan penelitian deskriptif dengan pendekatan kualitatif. Tujuan penelitian ini adalah mendeskripsikan profil penalaran proporsional siswa SMP dalam memecahkan masalah matematika berdasarkan gaya kognitif sistematis dan intuitif. Penelitian ini dilakukan di kelas IX SMP Al-Muslim Sidoarjo pada tahun ajaran 2016/2017. Subjek penelitian ini adalah seorang siswa bergaya kognitif sistematis dan seorang siswa bergaya kognitif sistematis. Alat pengumpul data berupa Tes Gaya Kognitif (TGK, Tugas Pemecahan Masalah (TPM, Pedoman wawancara, dan alat rekam audio visual. Data penelitian diperoleh dari pemberian tugas pemecahan masalah dan wawancara  sebanyak dua kali. Wawancara dilakukan untuk mengungkapkan profil penalaran proporsional dalam memecahkan masalah matematika terkait materi perbandingan. Keabsahan data diuji dengan triangulasi waktu. Hasil penelitian menunjukkan kedua subjek gagal membedakan masalah proporsional dan bukan proporsional pada tahap memahami masalah. Pada tahap menyusun rencana, Siswa bergaya kognitif sistematis mengelompokkan bagian-bagian yang sebanding untuk membuat persamaan. Sedangkan siswa bergaya kognitif intuitif membandingkan luas lahan pertama dan kedua, kemudian menyederhanakan perbandingannya. Pada tahap melaksanakan rencana, siswa bergaya kognitif sistematis menggunakan strategi cross product algorithm untuk menemukan solusi. Sedangkan siswa bergaya kognitif intuitif menggunakan strategi build-up method dan factor of change untuk menemukan solusi. Pada tahap memeriksa kembali, Siswa bergaya konitif sistematis dan intuitif mengecek solusi yang mereka peroleh dengan mensubtitusi masing-masing solusi ke persamaan, kemudian melihat nilai perbandingan yang dihasilkan. Jawaban benar jika nilai perbandingan dalam persaamaan tersebut sama.   This research uses descriptive qualitative approach. The purpose of this study was to describe proportional reasoning profile of junior high school student in

  7. Patient- and Aneurysm-Specific Risk Factors for Intracranial Aneurysm Growth : A Systematic Review and Meta-Analysis

    NARCIS (Netherlands)

    Backes, Daan; Rinkel, Gabriel J E; Laban, Kamil G.; Algra, Ale; Vergouwen, Mervyn D I

    2016-01-01

    BACKGROUND AND PURPOSE—: Follow-up imaging is often performed in intracranial aneurysms that are not treated. We performed a systematic review and meta-analysis on patient- and aneurysm-specific risk factors for aneurysm growth. METHODS—: We searched EMBASE and MEDLINE for cohort studies describing

  8. Interobserver variability in the assessment of aneurysm occlusion with the WEB aneurysm embolization system.

    Science.gov (United States)

    Fiorella, David; Arthur, Adam; Byrne, James; Pierot, Laurent; Molyneux, Andy; Duckwiler, Gary; McCarthy, Thomas; Strother, Charles

    2015-08-01

    The WEB (WEB aneurysm embolization system, Sequent Medical, Aliso Viejo, California, USA) is a self-expanding, nitinol, mesh device designed to achieve aneurysm occlusion after endosaccular deployment. The WEB Occlusion Scale (WOS) is a standardized angiographic assessment scale for reporting aneurysm occlusion achieved with intrasaccular mesh implants. This study was performed to assess the interobserver variability of the WOS. Seven experienced neurovascular specialists were trained to apply the WOS. These physicians independently reviewed angiographic image sets from 30 patients treated with the WEB under blinded conditions. No additional clinical information was provided. Raters graded each image according to the WOS (complete occlusion, residual neck or residual aneurysm). Final statistics were calculated using the dichotomous outcomes of complete occlusion or incomplete occlusion. The interobserver agreement was measured by the generalized κ statistic. In this series of 30 test case aneurysms, observers rated 12-17 as completely occluded, 3-9 as nearly completely occluded, and 9-11 as demonstrating residual aneurysm filling. Agreement was perfect across all seven observers for the presence or absence of complete occlusion in 22 of 30 cases. Overall, interobserver agreement was substantial (κ statistic 0.779 with a 95% CI of 0.700 to 0.857). The WOS allows a consistent means of reporting angiographic occlusion for aneurysms treated with the WEB device. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. Foam generator and viscometer apparatus and process

    Science.gov (United States)

    Reed, Troy D.; Pickell, Mark B.; Volk, Leonard J.

    2004-10-26

    An apparatus and process to generate a liquid-gas-surfactant foam and to measure its viscosity and enable optical and or electronic measurements of physical properties. The process includes the steps of pumping selected and measured liquids and measured gases into a mixing cell. The mixing cell is pressurized to a desired pressure and maintained at a desired pressure. Liquids and gas are mixed in the mixing cell to produce a foam of desired consistency. The temperature of the foam in the mixing cell is controlled. Foam is delivered from the mixing cell through a viscometer under controlled pressure and temperature conditions where the viscous and physical properties of the foam are measured and observed.

  10. Oxidation behaviour of metallic glass foams

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, B.R. [Department of Materials Science and Engineering, 434 Dougherty Hall, University of Tennessee, Knoxville, TN 37996-2200 (United States)], E-mail: bbarnard@utk.edu; Liaw, P.K. [Department of Materials Science and Engineering, 434 Dougherty Hall, University of Tennessee, Knoxville, TN 37996-2200 (United States); Demetriou, M.D.; Johnson, W.L. [Department of Materials Science, Keck Laboratory, California Institute of Technology, Pasadena, CA 91125 (United States)

    2008-08-15

    In this study, the effects of porosity on the oxidation behaviour of bulk-metallic glasses were investigated. Porous Pd- and Fe-based bulk-metallic glass (BMG) foams and Metglas ribbons were studied. Oxidizing experiments were conducted at 70 deg. C, and around 80 deg. C below glass-transition temperatures, (T{sub g}s). Scanning-electron microscopy/energy-dispersive spectroscopy (SEM/EDS) studies revealed little evidence of oxidation at 70 deg. C. Specimens exhibited greater oxidation at T{sub g} - 80 deg. C. Oxides were copper-based for Pd-based foams, Fe-, Cr-, and Mo-based for Fe-based foams, and Co-based with borosilicates likely for the Metglas. Pd-based foams demonstrated the best oxidation resistance, followed by Metglas ribbons, followed by Fe-based foams.

  11. True pancreaticoduodenal artery aneurysms: A decision analysis

    International Nuclear Information System (INIS)

    Takao, Hidemasa; Nojo, Takeshi; Ohtomo, Kuni

    2010-01-01

    Purpose: True pancreaticoduodenal artery aneurysms are rare. No definitive study evaluating the natural history of these lesions or their preferred method of treatment has been published. The purpose of this study was to evaluate the outcome of preventive treatment of unruptured pancreaticoduodenal artery aneurysms using a Markov model. Materials and methods: With the use of a Markov model, we performed a decision analysis to evaluate the outcome of preventive treatment of unruptured pancreaticoduodenal artery aneurysms. The risk of rupture and the mortality of preventive treatment are unknown. Therefore, we performed sensitivity analysis using these parameters. Effectiveness was measured in life expectancy. Results: For 80-year-old patients, preventive treatment was dominated by no treatment if mortality rates of preventive treatment were greater than 1.4%, greater than 2.6%, greater than 3.8%, and greater than 4.8% at annual rupture rates of 1%, 2%, 3%, and 4%, respectively. For 50-year-old patients, preventive treatment was dominated by no treatment if mortality rates of preventive treatment were greater than 3.3%, greater than 5.9%, greater than 8.0%, and greater than 9.7% at annual rupture rates of 1%, 2%, 3%, and 4%, respectively. Conclusion: The effectiveness of preventive treatment of unruptured pancreaticoduodenal artery aneurysms depends on the aneurysm rupture rate, mortality rate of preventive treatment, and patient age. Taking into account the effects of these parameters is important in making treatment decisions.

  12. Mycotic aneurysms : radiological diagnosis and therapeutic alternatives

    International Nuclear Information System (INIS)

    Urbano, J.; Arjonilla, M. A.

    2002-01-01

    To review mycotic aneurysms, their radiological diagnosis and therapeutic alternatives. Five men and a woman between 69 and 84 years old were diagnosed during the last 4 years with mycotic aneurysms. Three were in the aorta, one in the thoracic and two in the abdominal region; one was affecting the left primitive iliac artery, another the left popliteal artery and, in the last case, the medial cerebral artery. Hemo cultures were done on all patients. The surgical specimen was cultivated in 4. CAT was done on 5 patients, angiography on another five and Doppler ultrasound scan on two. Five patients showed positive hemo cultures and in two the surgical specimen culture was positive. The findings of the CAT were decisive in being able to suspect that the lesions were mycotic in nature. Three patients had to undergo emergency, expiring either in surgery or in postoperative care. One case was treated by means of aortic endo prosthesis, and one year later the patient remains asymptomatic. The cerebral aneurysm was embolized with metal coils and the patient remains asymptomatic three years later. The popliteal aneurysm underwent surgical intervention using an established protocol with good results. CAT is decisive in the diagnosis of mycotic aneurysms. Once detected, they must be treated without delay as their natural evolution is one of rapid expansion and rupture. Angiographies help in planning the treatment. Radiological intervention plays an important role in the treatment. (Author) 13 refs

  13. Experimental Study of Flow Through Carotid Aneurysms

    Science.gov (United States)

    Masoomi, Faezeh; Mejia-Alvarez, Ricardo

    2017-11-01

    There is evidence that traditional endovascular techniques like coiling are not effective for treatment of wide-neck cerebral aneurysms. Flow Diverter Stents (FDS) have emerged as promising devices for treating complex aneurysms since they enable treatment of aneurysms that were considered untreatable before. Recent studies suggest a number of associated risks with FDS, including in-stent thrombosis, perianeurysmal edema, delayed hemorrhage, and perforator occlusions. Chong et al. simulated hemodynamic behavior using patient-specific data. From their study, it is possible to infer that the standard deviation of energy loss could be a good predictor for intervention success. The aim of this study is to investigate the flow in models of cerebral aneurysms before and after FDS insertion using PIV. These models will be based on actual clinical studies and will be fabricated with advanced additive manufacturing techniques. These data will then be used to explore flow parameters that could inform the likelihood of post-intervention aneurysm rupture, and help determine FDS designs that better suit any particular patient before its procedure.

  14. Cavitating Propeller Performance in Inclined Shaft Conditions with OpenFOAM: PPTC 2015 Test Case

    Science.gov (United States)

    Gaggero, Stefano; Villa, Diego

    2018-05-01

    In this paper, we present our analysis of the non-cavitating and cavitating unsteady performances of the Potsdam Propeller Test Case (PPTC) in oblique flow. For our calculations, we used the Reynolds-averaged Navier-Stokes equation (RANSE) solver from the open-source OpenFOAM libraries. We selected the homogeneous mixture approach to solve for multiphase flow with phase change, using the volume of fluid (VoF) approach to solve the multiphase flow and modeling the mass transfer between vapor and water with the Schnerr-Sauer model. Comparing the model results with the experimental measurements collected during the Second Workshop on Cavitation and Propeller Performance - SMP'15 enabled our assessment of the reliability of the open-source calculations. Comparisons with the numerical data collected during the workshop enabled further analysis of the reliability of different flow solvers from which we produced an overview of recommended guidelines (mesh arrangements and solver setups) for accurate numerical prediction even in off-design conditions. Lastly, we propose a number of calculations using the boundary element method developed at the University of Genoa for assessing the reliability of this dated but still widely adopted approach for design and optimization in the preliminary stages of very demanding test cases.

  15. PENERAPAN STANDAR PELAYANAN MINIMAL PEGAWAI TATA USAHA DI SMP NEGERI SE-KOTA SALATIGA

    Directory of Open Access Journals (Sweden)

    Aan Ikhsananto

    2016-06-01

    Full Text Available Pegawai tata usaha memiliki tugas-tugas pelayanan yang berhubungan dengan banyak orang di lingkungan sekolah. Observasi awal yang dilakukan peneliti menunjukkan bahwa penerapan Standar Pelayanan Minimal (SPM masih kurang. Melalui peningkatan kompetensi pegawai diharapkan dapat memenuhi standar pelayanan minimal pegawai tata usaha di sekolah. Pemanfaatan fasilitas kantor juga diharapkan dapat menunjang standar pelayanan minimal. Selain itu ketersediaan teknologi informasi diharapkan penerapan standar pelayanan minimal dapat semakin meningkat. Tujuan dari penelitian ini adalah untuk mengetahui apakah kompetensi pegawai, fasilitas kantor, dan teknologi infomasi berpengaruh terhadap penerapan SPM pegawai tata usaha.Variabel dalam penelitian ini adalah kompetensi pegawai (X1, fasilitas kantor (X2 dan teknologi informasi (X3 sebagai variabel bebas serta standar pelayanan minimal (Y sebagai variabel terikatnya. Sampel dalam penelitian ini adalah seluruh pegawai tata usaha (TU di SMP Negeri Se-Kota Salatiga, berjumlah 54 pegawai. Metode pengumpulan data yang digunakan adalah metode dokumentasi, wawancara, dan kuesioner. Teknik analisis data dapat menggunakan regresi berganda bantuan SPSS, asumsi klasik, dan analisis deskriptif persentase. Hasil penelitian ini dapat disimpulkan bahwa kompetensi pegawai, fasilitas kantor, dan teknologi informasi berpengaruh positif dan signifikan terhadap penerapan standar pelayanan minimal pegawai. Clerical employee has service tasks associated with many people in the school environment. Preliminary observations conducted by researchers showed that the application of the Minimum Service Standards (SPM is still lacking. By improving the competence of employees is expected to meet minimum service standards in school administration employees. The usefullness of office facilities are also expected to support the minimum service standards. Besides the availability of information technology is expected implementation of

  16. Keefektifan Auditory Intellectually Repetition Berbantuan LKPD terhadap Kemampuan Penalaran Peserta Didik SMP

    Directory of Open Access Journals (Sweden)

    Ika Martyana Handayani

    2014-06-01

    Full Text Available AbstrakPenelitian ini bertujuan untuk mengetahui keefektifan pembelajaran model pembelajaran Audi-tory intellectually Repetition (AIR berbantuan LKPD terhadap kemampuan penalaran matematis peserta didik. Populasi dalam penelitian ini adalah peserta didik kelas VIII SMP Negeri 1 Blado tahun pelajaran 2012/2013. Metode penelitian ini merupakan penelitian eksperimen yang dila-kukan pada dua kelas yang memiliki kemampuan setara dengan model pembelajaran yang berbe-da. Berdasarkan pemilihan secara acak terpilih dua kelompok yaitu kelompok eksperimen yang diterapkan pembelajaran matematika menggunakan model pembelajaran AIR dan kelompok kontrol yang diterapkan model pembelajaran STAD. Hasil penelitian menunjukkan bahwa hasil belajar peserta didik pada aspek kemampuan penalaran matematis yang diajar menggunakan mo-del pembelajaran AIR mencapai ketuntasan klasikal, persentase hasil belajar peserta didik pada aspek kemampuan penalaran matematis pada kelompok eksperimen lebih baik dari kelompok kontrol, rata-rata hasil belajar peserta didik pada aspek kemampuan penalaran matematis pada kelas eksperimen lebih baik dari kelas kontrol. Berdasarkan pembahasan di atas dapat disimpul-kan bahwa pembelajaran menggunakan model AIR berbantuan LKPD efektif terhadap kemam-puan penalaran matematis peserta didik. Kata kunci:          Auditory Intellectually Repetition; Keefektifan; Kemampuan Penalaran.  AbstractThe purpose of this study was to determine learning using the Auditory Intellectually Repetition model approaches effective to student’s reasoning ability. The population in this study was students of grade VIII SMP N 1 Blado academic year 2012/2013. This research method is an experimental research that applied on two classes who have similar abilities with different learning models. Based on the random selection of two groups chosen experimental applied mathematics learning using learning model AIR and the control group were applied learning model

  17. PENINGKATAN PEMAHAMAN KONSEP DAN KOMPETENSI STRATEGIS MATEMATIS SISWA SMP DENGAN PENDEKATAN METAPHORICAL THINKING

    Directory of Open Access Journals (Sweden)

    M. Afrilianto

    2012-09-01

    Full Text Available Penelitian ini bertujuan untuk mendeskripsikan dan menelaah peningkatan  pemahaman konsep dan kompetensi strategis matematis antara siswa yang memperoleh pembelajaran dengan pendekatan metaphorical thinking, dengan siswa yang memperoleh pembelajaran biasa. Jenis penelitian ini merupakan kuasi eksperimen. Populasi penelitian ini adalah seluruh siswa kelas VIII SMP Negeri 12 Bandung. Sampel dalam penelitian ini dipilih sebanyak 2 kelas dari kelas VIII. Kelas eksperimen memperoleh pembelajaran dengan pendekatan metaphorical thinking, dan kelas kontrol memperoleh pembelajaran biasa. Instrumen penelitian meliputi tes pemahaman konsep dan kompetensi strategis matematis, angket, pedoman observasi dan pedoman wawancara. Pengolahan data peningkatan pemahaman konsep dan kompetensi strategis matematis menggunakan uji-t dan uji Mann-Whitney. Hasil penelitian menunjukkan bahwa (1 Terdapat perbedaan peningkatan pemahaman konsep dan kompetensi strategis matematis antara siswa yang memperoleh pembelajaran dengan pendekatan metaphorical thinking, dengan siswa yang memperoleh pembelajaran biasa; (2 Siswa menunjukkan sikap yang positif terhadap pembelajaran dengan pendekatan metaphorical thinking.   Kata Kunci: pendekatan metaphorical thinking, pemahaman konsep matematis, kompetensi strategis matematis.   This research aim to describe and to analyze the enhancement of mathematical conceptual understanding and strategic competence between students in metaphorical thinking approach and conventional learning. This kind of research is a quasi experiment. The populations of this research are all of the students of VIII grade in SMP Negeri 12 Bandung. The samples of this research are by choosing 2 classes of VIII grade. The experiment class obtains the metaphorical thinking approach, and the control class obtains the conventional learning. The research of data is obtained by giving a mathematical conceptual understanding and strategic competence test, questionnaire

  18. Faktor-Faktor yang Berhubungan dengan Usia Menarche Siswi SMP Adabiah

    Directory of Open Access Journals (Sweden)

    Fitrah Umi Mutasya

    2016-01-01

    Full Text Available AbstrakMenarche (menars adalah haid pertama dari uterus yang merupakan awal dari fungsi menstruasi dan tanda telah terjadinya pubertas pada remaja putri. Pada dekade terakhir menunjukkan kecenderungan pergeseran usia menars ke arah umur yang lebih muda. Tujuan penelitian ini adalah menentukan faktor-faktor yang berhubungan dengan usia menars. Jenis penelitian ini adalah analitik observasional dalam bentuk rancangan cross sectional study. Populasi dalam penelitian ini adalah seluruh siswi SMP Adabiah kelas VII dan VIII tahun ajaran 2012/2013. Jumlah sampel sebanyak 72 siswi yang diambil secara Simple Random Sampling. Data dikumpulkan dengan angket dan pengukuran tinggi dan berat badan responden. Pengolahan data dilakukan secara komputerisasi dan analisis dengan uji chi-square pada α = 0,05. Hasil penelitian didapatkan bahwa usia menars rata-rata siswi SMP Adabiah adalah 12,29 ± 0,49 tahun. Uji statistik menunjukkan terdapat hubungan yang bermakna antara tingkat pendapatan per kapita dan status gizi dengan usia menars sedangkan tingkan pendidikan orang tua dan paparan media massa tidak terdapat hubungan yang bermakna dengan usia menars.Kata kunci: usia menars, pendapatan per kapita, status gizi AbstractMenarche is the first menstruation or bleeding of the uterus that is the beginning of the menstrual function and mark the occurrence of puberty in young girls. In the past decade shows a shift in the age of menarche trend toward younger age. The objective of this study was to determine the associated factors to age of menarche. This type of research is observational analytic with cross sectional study design. The population in this study were all junior high school students of class VII and VIII academic year 2012/2013. The total sample of 72 student were taken by simple random sampling. Data were collected by questionnaire and measurement of height and weight. Data was analyzed  by chi-square test at α = 0,005. The result showed that the

  19. True aneurysm of the proximal occipital artery: Case report

    Directory of Open Access Journals (Sweden)

    Giulio Illuminati

    Full Text Available Introduction: True aneurysms of the proximal occipital artery are rare, may cause neurological symptoms due to compression of the hypoglossal nerve and their resection may be technically demanding. Presentation of case: The case of an aneurysm of the proximal occipital artery causing discomfort and tongue deviation by compression on the hypoglossal nerve is reported. Postoperative course after resection was followed by complete regression of symptoms. Conclusion: Surgical resection, as standard treatment of aneurysms of the occipital artery, with the eventual technical adjunct of intubation by the nose is effective in durably relieving symptoms and preventing aneurysm-related complication. Keywords: Arterial aneurysm, Occipital artery, Case report

  20. Comprehensive Overview of Contemporary Management Strategies for Cerebral Aneurysms.

    Science.gov (United States)

    Manhas, Amitoz; Nimjee, Shahid M; Agrawal, Abhishek; Zhang, Jonathan; Diaz, Orlando; Zomorodi, Ali R; Smith, Tony; Powers, Ciarán J; Sauvageau, Eric; Klucznik, Richard P; Ferrell, Andrew; Golshani, Kiarash; Stieg, Philip E; Britz, Gavin W

    2015-10-01

    Aneurysmal subarachnoid hemorrhage (SAH) remains an important health issue in the United States. Despite recent improvements in the diagnosis and treatment of cerebral aneurysms, the mortality rate following aneurysm rupture. In those patients who survive, up to 50% are left severely disabled. The goal of preventing the hemorrhage or re-hemorrhage can only be achieved by successfully excluding the aneurysm from the circulation. This article is a comprehensive review by contemporary vascular neurosurgeons and interventional neuroradiolgists on the modern management of cerebral aneurysms. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Surgical approach to posterior inferior cerebellar artery aneurysms.

    Science.gov (United States)

    La Pira, Biagia; Sturiale, Carmelo Lucio; Della Pepa, Giuseppe Maria; Albanese, Alessio

    2018-02-01

    The far-lateral is a standardised approach to clip aneurysms of the posterior inferior cerebellar artery (PICA). Different variants can be adopted to manage aneurysms that differ in morphology, topography, ruptured status, cerebellar swelling and surgeon preference. We distinguished five paradigmatic approaches aimed to manage aneurysms that are: proximal unruptured; proximal ruptured requiring posterior fossa decompression (PFD); proximal ruptured not requiring PFD; distal unruptured; distal ruptured. Preoperative planning in the setting of PICA aneurysm surgery is of paramount importance to perform an effective and safe procedure, to ensure an adequate PFD and optimal proximal control before aneurysm manipulation.

  2. Polymer microcapsules with "foamed" membranes.

    Science.gov (United States)

    Lavergne, Fleur-Marie; Cot, Didier; Ganachaud, François

    2007-06-05

    This article describes the preparation of capsules displaying craters at their surfaces and independent holes inside their membranes. These poly(methylmethacrylate) capsules of 20 to 200 microm diameter are prepared by a solvent evaporation process and typically contain a dispersant, polyvinyl alcohol, and an excipient, namely, a fatty acid triglyceride (miglyol 812). Spectroscopic methods showed that, depending on the miglyol content, the craters at the surface exhibited sizes of about 1 to 2 microm, whereas the core structure of the membrane changed significantly, typically from "soft-part-of-bread" up to "foamed"-like aspects. Among several spectroscopy techniques, confocal fluorescence microscopy confirmed that the capsules retained the miglyol in their core and not in the craters or holes, even after centrifugation and handling. This technique also showed that holes in the membrane are filled with water. A possible analysis of the "foaming" phenomenon based on the surface tensions of different oils, as well as their optimal hydrophile-lipophile balance (HLBO), is added to generalize the concept.

  3. Carbon particle induced foaming of molten sucrose for the preparation of carbon foams

    International Nuclear Information System (INIS)

    Narasimman, R.; Vijayan, Sujith; Prabhakaran, K.

    2014-01-01

    Graphical abstract: - Highlights: • An easy method for the preparation of carbon foam from sucrose is presented. • Wood derived activated carbon particles are used to stabilize the molten sucrose foam. • The carbon foams show relatively good mechanical strength. • The carbon foams show excellent CO 2 adsorption and oil absorption properties. • The process could be scaled up for the preparation of large foam bodies. - Abstract: Activated carbon powder was used as a foaming and foam setting agent for the preparation of carbon foams with a hierarchical pore structure from molten sucrose. The rheological measurements revealed the interruption of intermolecular hydrogen bonding in molten sucrose by the carbon particles. The carbon particles stabilized the bubbles in molten sucrose by adsorbing on the molten sucrose–gas interface. The carbon foams obtained at the activated carbon powder to sucrose weight ratios in the range of 0–0.25 had a compressive strength in the range of 1.35–0.31 MPa. The produced carbon foams adsorb 2.59–3.04 mmol/g of CO 2 at 760 mmHg at 273 K and absorb oil from oil–water mixtures and surfactant stabilized oil-in-water emulsions with very good selectivity and recyclability

  4. Foam pad of appropriate thickness can improve diagnostic value of foam posturography in detecting postural instability.

    Science.gov (United States)

    Liu, Bo; Leng, Yangming; Zhou, Renhong; Liu, Jingjing; Liu, Dongdong; Liu, Jia; Zhang, Su-Lin; Kong, Wei-Jia

    2018-04-01

    The present study investigated the effect of foam thickness on postural stability in patients with unilateral vestibular hypofunction (UVH) during foam posturography. Static and foam posturography were performed in 33 patients (UVH group) and 30 healthy subjects (control group) with eyes open (EO) and closed (EC) on firm surface and on 1-5 foam pad(s). Sway velocity (SV) of center of pressure, standing time before falling (STBF) and falls reaction were recorded and analyzed. (1) SVs had an increasing tendency in both groups as the foam pads were added under EO and EC conditions. (2) STBFs, only in UVH group with EC, decreased with foam thickness increasing. (3) Significant differences in SV were found between the control and UVH group with EO (except for standing on firm surface, on 1 and 2 foam pad(s)) and with EC (all surface conditions). (4) Receiver operating characteristic curve analysis showed that the SV could better reflect the difference in postural stability between the two groups while standing on the 4 foam pads with EC. Our study showed that diagnostic value of foam posturography in detecting postural instability might be enhanced by using foam pad of right thickness.

  5. Generation of sclerosant foams by mechanical methods increases the foam temperature.

    Science.gov (United States)

    Tan, Lulu; Wong, Kaichung; Connor, David; Fakhim, Babak; Behnia, Masud; Parsi, Kurosh

    2017-08-01

    Objective To investigate the effect of agitation on foam temperature. Methods Sodium tetradecyl sulphate and polidocanol were used. Prior to foam generation, the sclerosant and all constituent equipment were cooled to 4-25℃ and compared with cooling the sclerosant only. Foam was generated using a modified Tessari method. During foam agitation, the temperature change was measured using a thermocouple for 120 s. Results Pre-cooling all the constituent equipment resulted in a cooler foam in comparison with only cooling the sclerosant. A starting temperature of 4℃ produced average foam temperatures of 12.5 and 13.2℃ for sodium tetradecyl sulphate and polidocanol, respectively. It was also found that only cooling the liquid sclerosant provided minimal cooling to the final foam temperature, with the temperature 20 and 20.5℃ for sodium tetradecyl sulphate and polidocanol, respectively. Conclusion The foam generation process has a noticeable impact on final foam temperature and needs to be taken into consideration when creating foam.

  6. Foam stabilization by solid particle aggregates

    Energy Technology Data Exchange (ETDEWEB)

    Guignot, S.; Faure, S. [CEA Marcoule, Lab. des Procedes Avances de Decontamination, 30 (France); Pitois, O. [UniversiteParis-Est Marne-La-Valle, Lab. Physique des Materiaux Divises et des Interfaces (LPMDI), 77 - Marne la Vallee (France)

    2008-07-01

    During the dismantling of nuclear facilities, radioactive deposits on exposed areas are removed and solubilized by successive rinses of reactive liquid. Using this liquid in a foam state reduces the amount of resulting wastes. During the required decontamination time (1 to 5 hours) the foam has to be sufficiently wet (1). In the Laboratory of Advanced Processes for Decontamination, new formulations are currently studied to slow down the drainage kinetics of these foams, by adding colloidal particles of hydrophilic fumed silica into the classical mixtures of well-defined non ionic foaming surfactants previously used (2). The objective of our study is to shed light on the foam surprising stability induced by these particles. The study focuses on drainage of foams generated by air sparging through a suspension lying on a porous glass. The foaming suspensions contain between 0 and 70 g.L-1 of a fumed silica (Aerosil 380) which is well-known to form gels for concentrations above 200 g.L{sup -1}. In the studied solutions this silica builds up into aggregates of dozens of microns, whose volume-averaged mean diameter after sonication is centred around 300 nm. Under gentle stirring, they display no sign of re-aggregation during 24 h. On a free drainage configuration, a foam that contains particles keeps a significant amount of its initial liquid: up to 60 % during up to 5 hours, in contrast to classical foams that drain out all of their liquid in about 20 minutes. From a rheological point of view, the most concentrated suspensions display a yield stress behaviour. This evidences the structuring of the aggregates into a coherent network that might explain the incomplete drainage of the solutions. For the lowest concentrated solutions, such rheological properties have not been observed although the corresponding foams can retain large amount of solution. This suggests that local concentrations of aggregates can rise owing to their retention by foam channels, until they form

  7. Idiopathic multiple aneurysm of external carotid artery

    Directory of Open Access Journals (Sweden)

    Saravanan Balachandran

    2014-01-01

    Full Text Available Aneurysms of external carotid artery are rare. Treatments for these are undertaken for the prevention of complications like hemorrhage or rupture, and embolism. We present a 71-year-old male with idiopathic multiple aneurysm for the past 34 years on conservative management and regular follow up for the past 4 years. This case was discussed for the rarity of idiopathic multiple aneurysm of the external carotid artery and the need for individualized treatment protocol to be followed as in this case, only watchful observation considering the age and patient compliance. In this world of evolving surgical techniques and newer treatment modalities, conservative treatment still has a role to play. Primary care physicians at the community level have a major role in following these patients and referring them as and when the need arises.

  8. Inflammatory aneurysms of the abdominal aorta

    International Nuclear Information System (INIS)

    Cilotti, A.; Bagnolesi, P.; Cigoni, R.; Bimbi, M; Bartolozzi, C.

    1991-01-01

    The authors report their experience with US and CT in 31 cases of inflammatory aneurysms out of a study population of 200 patients with abdominal aortic aneurysms. The work started with a case that had not been diagnosed at US, either due to the operator's poor knowledge of this pathologic condition or because of improper examination tecnique. The authors stress the importance of a highfrequency probe and proper gain settings which are often necessary for a good visualization of the anterior aortic wall. The correct diagnosis of the inflammatory nature of the aneurysm has been assessed by US ever since, in all cases except for very obese and meteoric patients. in our series, US diagnostic accuracy was 78% versus 33% reported in literature. US was not accurate in evaluating adjacent structures involvement within fibrous tissues (ureteral narrowing, caval narrowing)-which CT did. Neither US nor CT exhibited reliable diagnostic accuracy in demonstrating enteric involvement within fibrous tissues

  9. Handbook of plastic foams: types, properties, manufacture, and applications

    National Research Council Canada - National Science Library

    Landrock, Arthur H

    1995-01-01

    ... is an introduction and also covers the subject of foam formation. The chapter includes a discussion of the Montreal Protocol mandating the development of foams with substantially reduced CFC content by 1995. Chapter 2 is a comprehensive discussion of thermosetting foams of all types, with the emphasis on urethane and phenolic foams. The authors, K Ashida and K Iwa...

  10. Idiopathic aneurysm of pulmonary artery

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco, Julio B. Cota; Pimentel, Patricia N.; Knust, Beatriz S., E-mail: jcota@uol.com.br [Clinica de Cardiologia Cota Pacheco, Mogi das Cruzes, SP (Brazil)

    2015-07-15

    Because it is a very rare isolated lesion, we decided to present this case of idiopathic pulmonary artery aneurysm (IPAA) and review the cases published in the literature in order to correlate our clinical and imaging findings, as well as management based on patient data. IPAA was first described in a case of autopsy by Bristowe in 1860 and later in 1947 by Deterling and Claggett, whose prevalence was lower than eight to one hundred thousand. Although the use of diagnostic imaging methods has been applied in a very large population in recent decades, this lesion has been most often described in postmortem examinations. Therefore, it is important to be aware of possible clinical symptoms, at times non-specific, as well as the signs on imaging studies. In this study, therefore, the report of a case of an asymptomatic patient whose diagnosis was done through color Doppler echocardiography in a routine test in 2012, later confirmed by simple chest computed tomography (chest CT) and cardiac catheterization as IPAA and its branches. We discussed the literature available and the possibilities for treatment and the use of color Doppler echocardiography as an initial diagnostic tool for such a rare and intriguing disease. (author)

  11. Magnetic resonance imaging of large and giant intracranial aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Matsumura, Kenichi; Saito, Akira; Nakasu, Yoko; Matsuda, Masayuki; Handa, Jyoji [Shiga University of Medical Science, Shiga (Japan); Todo, Giro

    1990-06-01

    Twelve large or giant intracranial aneurysms were studied with magnetic resonance (MR) imaging, and the findings were compared with those from computed tomographic (CT) scanning. Characteristic MR features of such aneurysms are: round, extra-axial mass with hypointensity rim; signal void, paradoxical enhancement, or even-echo rephasing due to blood flow; and laminated, eccentric thrombus with increased signal intensity when fresh, perianeurysmal hemorrhage occurs in the acute or subacute stage after aneurysmal rupture. MR imaging, however, often fails to identify or characterize the area of calcification. For the diagnosis of large or giant intracranial aneurysms, MR imaging is apparently superior to CT scanning in differentiating aneurysms from tumors, delineating the blood flow and intraluminal thrombus, and detecting the exact size of the aneurysm. It may also provide useful information concerning the growth mechanisms of aneurysms with or without thrombus formation. (author).

  12. Safety and efficacy of aneurysm treatment with WEB

    DEFF Research Database (Denmark)

    Pierot, Laurent; Costalat, Vincent; Moret, Jacques

    2016-01-01

    OBJECT WEB is an innovative intrasaccular treatment for intracranial aneurysms. Preliminary series have shown good safety and efficacy. The WEB Clinical Assessment of Intrasaccular Aneurysm Therapy (WEBCAST) trial is a prospective European trial evaluating the safety and efficacy of WEB in wide......-neck bifurcation aneurysms. METHODS Patients with wide-neck bifurcation aneurysms for which WEB treatment was indicated were included in this multicentergood clinical practices study. Clinical data including adverse events and clinical status at 1 and 6 months were collected and independently analyzed by a medical....... RESULTS Ten European neurointerventional centers enrolled 51 patients with 51 aneurysms. Treatment with WEB was achieved in 48 of 51 aneurysms (94.1%). Adjunctive implants (coils/stents) were used in 4 of 48 aneurysms (8.3%). Thromboembolic events were observed in 9 of 51 patients (17.6%), resulting...

  13. Endoport-Assisted Microsurgical Treatment of a Ruptured Periventricular Aneurysm

    Directory of Open Access Journals (Sweden)

    Ching-Jen Chen

    2016-01-01

    Full Text Available Background and Importance. Ruptured periventricular aneurysms in patients with moyamoya disease represent challenging pathologies. The most common methods of treatment include endovascular embolization and microsurgical clipping. However, rare cases arise in which the location and anatomy of the aneurysm make these treatment modalities particularly challenging. Clinical Presentation. We report a case of a 34-year-old female with moyamoya disease who presented with intraventricular hemorrhage. CT angiography and digital subtraction angiography revealed an aneurysm located in the wall of the atrium of the right lateral ventricle. Distal endovascular access was not possible, and embolization risked the sacrifice of arteries supplying critical brain parenchyma. Using the BrainPath endoport system, the aneurysm was able to be accessed. Since the fusiform architecture of the aneurysm prevented clip placement, the aneurysm was ligated with electrocautery. Conclusion. We demonstrate the feasibility of endoport-assisted approach for minimally invasive access and treatment of uncommon, distally located aneurysms.

  14. Giant aneurysm in 6 years old child - case report

    International Nuclear Information System (INIS)

    Sirakov, S.; Penkov, M.; Todorov, Y; Minkin, K.

    2014-01-01

    Intracranial saccular aneurysms rare in childhood is. Even among the reported series of childhood aneurysms, it is unusual to find their occurrence in children less than 7 years old. The pathogenesis of these lesions is also a matter of debate and speculations. The peak age of incidence of juvenile cerebral aneurysms appear to be 12 years, occurrence below the age of 7 being rarity. We show a case of 6 years old boy with giant aneurysm. found because of episodes of headache and vomiting. Discussion of pathogenesis for the rare pathology. After discussion of multidisciplinary team, of neuroradiologist and neurosurgeons was decided to be perform endovascular embolization, because of the better outcome for the patient. We performed endovascular treatment of the aneurysm with achieving total embolization. The patient recovery completely, and after 4 days went home. (authors) Key words: GIANT ANEURYSM. SACCULAR ANEURYSM. EMBOLIZATION. STENT ASSISTED COILING

  15. ADAMTS-1 in abdominal aortic aneurysm.

    Directory of Open Access Journals (Sweden)

    Emina Vorkapic

    Full Text Available Extracellular matrix degradation is a hallmark of abdominal aortic aneurysm (AAA. Among proteases that are capable of degrading extracellular matrix are a disintegrin and metalloproteases with thrombospondin motifs (ADAMTS. Pathogenesis of these proteases in AAA has not been investigated until date.Human aneurysmal and control aortas were collected and analyzed with RT-PCR measuring the ADAMTS-1, 4,5,6,8,9,10,13,17 and ADAMTSL-1. Expression of a majority of the investigated ADAMTS members on mRNA level was decreased in aneurysm compared to control aorta. ADAMTS-1 was one of the members that was reduced most. Protein analysis using immunohistochemistry and western blot for localization and expression of ADAMTS-1 revealed that ADAMTS-1 was present predominantly in areas of SMCs and macrophages in aneurysmal aorta and higher expressed in AAA compared to control aortas. The role of ADAMTS-1 in AAA disease was further examined using ADAMTS-1 transgenic/apoE-/- mice with the experimental angiotensin II induced aneurysmal model. Transgenic mice overexpressing ADAMTS-1 showed to be similar to ADAMTS-1 wild type mice pertaining collagen, elastin content and aortic diameter.Several of the ADAMTS members, and especially ADAMTS-1, are down regulated at mRNA level in AAA, due to unknown mechanisms, at the same time ADAMTS-1 protein is induced. The cleavage of its substrates, don't seem to be crucial for the pathogenesis of AAA but rather more important in the development of thoracic aortic aneurysm and atherosclerosis as shown in previous studies.

  16. Contrast settling in cerebral aneurysm angiography

    International Nuclear Information System (INIS)

    Wang Zhijie; Hoffmann, Kenneth R; Guterman, Lee R; Wang Zhou; Rudin, Stephen; Meng Hui

    2005-01-01

    During angiography, blood flow is visualized with a radiopaque contrast agent, which is denser than blood. In complex vasculature, such as cerebral saccular aneurysms, the density difference may produce an appreciable gravity effect, where the contrast material separates from blood and settles along the gravity direction. Although contrast settling has been occasionally reported before, the fluid mechanics behind it have not been explored. Furthermore, the severity of contrast settling in cerebral aneurysms varies significantly from case to case. Therefore, a better understanding of the physical principles behind this phenomenon is needed to evaluate contrast settling in clinical angiography. In this study, flow in two identical groups of sidewall aneurysm models with varying parent-vessel curvature was examined by angiography. Intravascular stents were deployed into one group of the models. To detect contrast settling, we used lateral view angiography. Time-intensity curves were analysed from the angiographic data, and a computational fluid dynamic analysis was conducted. Results showed that contrast settling was strongly related to the local flow dynamics. We used the Froude number, a ratio of flow inertia to gravity force, to characterize the significance of gravity force. An aneurysm with a larger vessel curvature experienced higher flow, which resulted in a larger Froude number and, thus, less gravitational settling. Addition of a stent reduced the aneurysmal flow, thereby increasing the contrast settling. We found that contrast settling resulted in an elevated washout tail in the time-intensity curve. However, this signature is not unique to contrast settling. To determine whether contrast settling is present, a lateral view should be obtained in addition to the anteroposterior (AP) view routinely used clinically so as to rule out contrast settling and hence to enable a valid time-intensity curve analysis of blood flow in the aneurysm

  17. ANALISIS PENERAPAN 8 STANDAR NASIONAL PENDIDIKAN PADA SMP NEGERI 2 DOLOPO KABUPATEN MADIUN

    Directory of Open Access Journals (Sweden)

    Luki Eko Cahyono

    2015-10-01

    Penelitian ini menggunakan desain penelitian Deskriptif Kualitatif. Jenis penelitian adalah studi kasus. Data yang digunakan adalah data Primer. Teknik pengumpulan data yang digunakan adalah wawancara dan dokumentasi. Teknik keabsahan data adalah Triangulasi Sumber dan teknik analisis data yang digunakan adalah pendekatan Strengths, Weakness, Opportunities, dan Threats (Analisis SWOT. Kesimpulan penelitian ini adalah (1 Hasil analisis Strenght (Kekuatan adalah sekolah sudah merencanakan, melaksanakan dan mengevaluasi sebagian besar indikator dalam pemenuhan Standar Nasional Pendidikan sehingga meningkatkan mutu pendidikan sekolah. (2 Hasil analisis Weakness (kelemahan adalah keterbatasan anggaran dana dan sumber daya manusia baik peserta didik, pendidik, maupun tenaga kependidikan dalam pemenuhan seluruh unsur Standar Nasional Pendidikan. (3 Hasil analisis Opportunities (peluang adalah Pemberian workshop dan pelatihan kepada pendidik dan tenaga kependidikan meningkatkan kualitas pendidikan sekolah, dan perencanaan, pelaksanaan pembiayaan serta evaluasi penganggaran yang baik memberikan dampak positif terhadap semua unsur operasional sekolah maupun sarana prasarana sekolah. (4 Hasil analisis Threats (Tantangan adalah perencanaan, sosialisasi, pelaksanaan dan evaluasi serta tindak lanjut yang tidak dijalankan dengan manajemen yang baik dalam upaya pemenuhan Standar Nasional Pendidikan akan menghambat peningkatan kualitas pendidikan sekolah. (5 Hasil penerapan Standar Nasional Pendidikan pada SMP Negeri 2 Dolopo menggunakan analisis SWOT menunjukkan bahwa Kekuatan lebih besar daripada Kelemahan dan Peluang lebih besar dari Ancaman, yang berarti Standar Nasional Pendidikan telah terpenuhi dan menghasilkan Akreditasi Sekolah nilai A.

  18. HUBUNGAN POLA ASUH DENGAN POLA PERKEMBANGAN SEKSUAL SEKUNDER PADA SISWA SMP

    Directory of Open Access Journals (Sweden)

    Uci Mayang Sari

    2016-12-01

    Full Text Available Background: Adolescence is a transition period from childhood to adulthood, both physically and psychologically. Parents are generally considered as primary teachers for their children, therefore parents play important roles in children development. Parenting style is one of the factors associated with the pattern of secondary sexual development. Objective: This study aimed to examine the relationship between parenting style and the pattern of secondary sexual development in junior high school students. Methods: This research was an observational analytic study, using cross sectional approach. The study population was all male students at SMP 1 Berbah Yogyakarta (188 students. Samples were selected using purposive sampling, involving 143 respondents. Data were analyzed with Chi square test. Result: There was a correlation between parenting style and the pattern of secondary sexual development (p= 0.000 <0.05, with PR value of 4,975, CI 95 % of 1,831-13,516. Conclusion: There was a relationship between parenting style and the pattern of secondary sexual development in junior high school students.

  19. KESANTUNAN BERBAHASA DALAM INTERAKSI PEMBELAJARAN BAHASA JAWA DI SMP N 1 BANYUMAS

    Directory of Open Access Journals (Sweden)

    Astiana Ajeng Rahadini

    2014-10-01

    Full Text Available Penelitian ini bertujuan untuk mendeskripsikan dan menganalisis bentuk, nilai, dan fungsi kesantunan berbahasa Jawa dalam interaksi antara guru dan siswa ketika pembelajaran bahasa Jawa di SMP N 1 Banyumas serta implikasinya bagi pembelajaran. Jenis pendekatan yang digunakan, yaitu deskriptif. Metode pengumpula data yang digunakan, yaitu metode simak bebas libat cakap, teknik rekam, dan catat. Hasil penelitian menunjukkan: (1 bentuk kesantunan berbahasa Jawa direpresentasi-kan dalam modus deklaratif atau kalimat berita, modus interogatif atau kalimat pertanyaan, modus imperatif atau kalimat perintah yang merepresentasikan jenis tindak tutur representatif, direktif, ekspresif, dan komisif; (2 Nilai kesantunan berbahasa dilihat dari isi tuturan yang mematuhi prinsip kesantunan berbahasa Jawa dan penggunaan unggah-ungguh basa; (3 Fungsi kesantunan berbahasa meliputi fungsi kompetitif dan fungsi menyenangkan. (4 Implikasi hasil penelitian meliputi peng-gunaan bentuk-bentuk kesantunan berbahasa Jawa untuk menyamankan interaksi pembelajaran, peningkatan nilai kesantunan tuturan dengan memperhatikan isi tuturan dan penggunaan unggah-ungguh basa yang benar, dan penggunaan fungsi kesantunan menyenangkan dan ungkapan penanda kesantunan untuk tindak tutur direktif dan ekspresif. Kata kunci: kesantunan berbahasa Jawa, interaksi pembelajaran

  20. PENGEMBANGAN MEDIA PEMBELAJARAN KOSAKATA BAHASA INGGRIS BERBANTUAN KOMPUTER UNTUK SISWA SMP KELAS VII

    Directory of Open Access Journals (Sweden)

    Bastani Bastani

    2014-05-01

    Full Text Available Penelitian ini bertujuan: (1 menghasilkan media pembelajaran kosakata bahasa Inggris berbantuan komputer untuk siswa SMP kelas VII; dan (2 mengetahui kelayakan media pada aspek materi, pemrograman, dan tampilan. Penelitian ini adalah penelitian dan pengembangan dengan menggunakan model pengembangan Borg & Gall dan Alessi & Trollip’s yang telah dimodifikasi. Penelitian ini dilaksanakan melalui tiga tahap, yaitu perencanaan, desain, dan pengembangan. Tahap perencanaan meliputi penetapan tujuan dan penganalisisan kebutuhan. Tahap desain meliputi penyelenggaraan focus group discussion, pembuatan flowchart, storyboard, penyiapan materi, dan bahan pendukung. Tahap pengembangan meliputi pembuatan aplikasi berdasarkan flowchart dan storyboard, validasi ahli dan validasi pengguna. Instrumen penelitian yang digunakan adalah kuesioner/angket dan tes. Hasil penelitian dan pengembangan ini adalah: (1 produk media pembelajaran kosakata bahasa Inggris berbantuan komputer dalam bentuk CD pembelajaran dan print out produk; dan (2 kelayakan media ditinjau dari aspek materi termasuk kriteria sangat layak dengan rata-rata skor 4,47 pada skala lima, aspek pemrograman termasuk kriteria sangat layak dengan rata-rata skor 4,21 dan aspek tampilan termasuk kriteria sangat layak dengan rata-rata skor 4,44. Kata kunci: pengembangan, media pembelajaran, kosakata, pembelajaran berbantuan komputer.

  1. PENINGKATAN PENGETAHUAN TENTANG SEJARAH BAGI SISWA SMP NEGERI 2 KELAPA DUA TANGERANG MELALUI WISATA EDUKASI

    Directory of Open Access Journals (Sweden)

    YUSTISIA KRISTIANA

    2015-12-01

    Full Text Available Edutourism is a program combining elements of tourist activities with education. Edutourism is expected tobe a means of preserving the culture values and introduce the history and culture of Indonesia. This is becausethe phenomena among the younger generation who are no longer interested in studying history. Sekolah TinggiPariwisata Pelita Harapan, Universitas Pelita Harapan developed educational travel programs catering for studentsof junior high schools to enhance interest in learning history. Students of SMP Negeri 2 Kelapa Dua Tangerangwere selected to attend this edutourism program by visiting Monumen Nasional and Museum Sejarah Jakarta. Thisprogram was conducted on Tuesday, April 17th, 2012 with total participants were 20 students and two teachers.Edutourism program was led by lecturer and guided by students of Travel Industry Management. The studentsand the team from Travel Industry Management were very enthusiastic during the edutourism. Benefits obtainedby the students through this program are (1 improving the understanding about historical sites in Jakarta, (2widening the knowledge about historical sites in Jakarta, and (3 developing the partnership between the SMPNegeri 2 Kelapa Dua Tangerang and Sekolah Tinggi Pariwisata Pelita Harapan, Universitas Pelita Harapan. Theedutourism program is well accepted and effective to increase student’s interest in learning history.Keywords: edutourism, student’s interest in learning history, historical site

  2. Investigations of shot reproducibility for the SMP diode at 4.5 MV.

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, Nichelle [National Security Technologies, LLC, Las Vegas, NV (United States); Crain, Marlon D. [National Security Technologies, LLC, Las Vegas, NV (United States); Droemer, Darryl W. [National Security Technologies, LLC, Las Vegas, NV (United States); Gignac, Raymond Edward [National Security Technologies, LLC, Las Vegas, NV (United States); Lare, Gregory A. [National Security Technologies, LLC, Las Vegas, NV (United States); Molina, Isidro [National Security Technologies, LLC, Las Vegas, NV (United States); Obregon, Rafael [National Security Technologies, LLC, Las Vegas, NV (United States); Smith, Chase C. [National Security Technologies, LLC, Las Vegas, NV (United States); Wilkins, Frank Lee [National Security Technologies, LLC, Las Vegas, NV (United States); Welch, Dale Robert [Voss Scientific, LLC, Albuquerque, NM (United States); Cordova, Steve Ray; Gallegos, M.; Johnston, Mark D.; Kiefer, Mark Linden; Leckbee, Joshua J.; Nielsen, Daniel Scott; Oliver, Bryan Velten; Renk, Timothy Jerome; Romero, Tobias; Webb, Timothy Jay; Ziska, Derek Raymond

    2013-11-01

    In experiments conducted on the RITS-6 accelerator, the SMP diode exhibits sig- ni cant shot-to-shot variability. Speci cally, for identical hardware operated at the same voltage, some shots exhibit a catastrophic drop in diode impedance. A study is underway to identify sources of shot-to-shot variations which correlate with diode impedance collapse. To remove knob emission as a source, only data from a shot series conducted with a 4.5-MV peak voltage are considered. The scope of this report is limited to sources of variability which occur away from the diode, such as power ow emission and trajectory changes, variations in pulsed power, dustbin and transmission line alignment, and di erent knob shapes. We nd no changes in the transmission line hardware, alignment, or hardware preparation methods which correlate with impedance collapse. However, in classifying good versus poor shots, we nd that there is not a continuous spectrum of diode impedance behavior but that the good and poor shots can be grouped into two distinct impedance pro les. This result forms the basis of a follow-on study focusing on the variability resulting from diode physics. 3

  3. Meningkatkan Hasil Belajar Matematika Melalui Model Pembelajaran Kooperatif Tipe Jigsaw pada Siswa SMP

    Directory of Open Access Journals (Sweden)

    Nasruddin Nasruddin

    2017-08-01

    Full Text Available In this study, we discuss about Jigsaw type cooperative learning model to improve mathematics learning outcomes on the basic competence of cubes and beams of students of class VIIIA SMP. This research is a Classroom Action Research (CAR conducted in SMPN 2 Lasusua Year Learning 2016/2017 even semester. This study uses two cycles, each cycle has procedures such as planning, action, observation and reflection. The results of this study indicate the implementation of cooperative learning model jigsaw type can improve student learning outcomes in mathematics subjects. The value after the first cycle action increased compared with the initial test of 45,85 to 65,75. Furthermore the average score of students after the second cycle action increased compared with the average score of students on the implementation of the first cycle action that is 65,75 to 80,60 and has met the predetermined performance indicators that 85% of students have received a minimum score of 65.

  4. PENGEMBANGAN MEDIA KOMIK IPA UNTUK MENINGKATKAN MOTIVASI BELAJAR DAN KARAKTER PESERTA DIDIK SMP

    Directory of Open Access Journals (Sweden)

    Ani Widyawati

    2015-04-01

    Full Text Available The objectives of this research were (1 to know the characteristics, (2 to review the advisability, and (3 to find out whether the science comic improve students learning motivation and character. This research is classified to Research and Development (R & D by referring to the ten main procedures developed by Borg and Gall. However this research only applied nine of the ten procedures stated above, they were: introduction, planning, developing, early try out, revision, limited try out, and final product revision. The subject of this research was grade VIII students of SMP Muhammadiyah 2 Yogyakarta. There were 43 respondents consisting of 5 students for individual try out, 10 students for small group try out, and 28 students for field try out. The data collecting instruments were validation sheet for media and material experts, observation sheet, interview guidelines, and students’character and motivation questionnaire sheet. The result of this research are as follows: (1 the characteristic of science comic were character-based and contained integrated science's material, (2 the advisability of character education-based science comic is considered as very good, and (3 therefore, the comics are applicate to develop motivation and character for JHS students.

  5. PENERAPAN JIGSAW PUZZLE COMPETITION DALAM PEMBELAJARAN KONTEKSTUAL UNTUK MENINGKATKAN MINAT DAN HASIL BELAJAR FISIKA SISWA SMP

    Directory of Open Access Journals (Sweden)

    D. Yulianti

    2012-01-01

    Full Text Available Untuk mengatasi kurangnya minat dan hasil belajar fisika siswa dilakukan penelitian melalui kegiatan pembelajaran fisikakontekstual berbantuan jigsaw puzzle competititon. Subjek penelitian ini adalah siswa kelas VII H SMP Negeri 18 Semarang.Penelitian ini telah dilakukan pembelajaran dengan pendekatan kontekstual berbantuan jigsaw puzzle competition. Hasilpenelitian menunjukkan bahwa pembelajaran kontekstual berbantuan jigsaw puzzle competition mampu meningkatan minat danhasil belajar siswa kelas VII H SMPNegeri 18 Semarang tahun pelajaran 2008/2009 secara signifikan. Agar lebih efektif sebaiknyadikembangkan pembelajaran kontekstual dengan metode lain agar diperoleh peningkatan minat dan hasil belajar Model ini perludiaplikasikan dalam pembelajaran fisika untuk materi yang lain. To overcome the problem of lack of students' interest as well as their achievements a Jigsaw Puzzle Competition in physicscontextual learning process was done. The students from VIIHclass of Junior High School 18 Semarang academic year 2008/2009were chosen as the subjects. The result of this research shows that contextual teaching and learning using Jigsaw PuzzleCompetition approach was not only increase the students' interest but also improve their achievements. In order to get moreeffective result, it is necessary to develop contextual teaching and learning by combining them with other method. Because of thegreat benefit of this model, it is necessary to apply this model to other physics learning concepts.Keywords: Jigsaw Puzzle Competition, contextual, interest;

  6. USING BIOPOLYMERS TO STABILIZE THE PROTEIN OXYGEN FOAM

    Directory of Open Access Journals (Sweden)

    N. V. Nepovinnyh

    2013-01-01

    Full Text Available The cottage cheese whey as an oxygen cocktail foaming base and natural juices as a flavoring ingredient are analyzed. The lifetime of foam generated by the serum proteins is not long: foam falls off rapidly; because from the foam liquid is released (syneresis. The effects of plant polysaccharides on the stabilization of the protein foam oxygen cocktail is studied. It was shown that the use of plant polysaccharides (guar gum, high methoxyl citrus pectin, locust been gum prolong the life of the foam up to 20 times, compared with conventional blowing agents. It was found that oxygen foam properties depend on the molecular weight of guar gum.

  7. Interesting images: Multiple coronary artery aneurysms.

    Science.gov (United States)

    Howard, Jonathon M; Viswanath, Omar; Armas, Alfredo; Santana, Orlando; Rosen, Gerald P

    2017-01-01

    We present the case of a 65-year-old male who presented with stable angina and dyspnea on exertion. His initial workup yielded a positive treadmill stress test for reversible apical ischemia, and transthoracic echocardiogram demonstrated impaired systolic function. Cardiac catheterization was then performed, revealing severe atherosclerotic disease including multiple coronary artery aneurysms. As a result, the patient was advised to and subsequently underwent a coronary artery bypass graft. This case highlights the presence of multiple coronary artery aneurysms and the ability to appreciate these pathologic findings on multiple imaging modalities, including coronary angiogram, transesophageal echocardiography, and direct visualization through the surgical field.

  8. Ruptured Aortic Aneurysm Presenting as a Stridor

    Directory of Open Access Journals (Sweden)

    Feng Lin

    2010-06-01

    Full Text Available Stridor is an abnormal, high-pitched, whining breathing sound caused by a blockage in the throat or larynx that is usually heard in children. We describe an unusual case of an 81-year-old man brought to our emergency department with sudden onset of dyspnea and shortness of breath. Stridor could be heard without a stethoscope. We found a huge mass over the left upper chest on chest radiography, suggesting an aortic aneurysm. We believed that these symptoms were caused by a huge thoracic aortic aneurysm with trachea/bronchi compression. Chest computed tomography confirmed the diagnosis.

  9. Isolated aneurysms of the iliac arteries

    International Nuclear Information System (INIS)

    Eckmann, A.; Schild, H.; Schmiedt, W.; Groenninger, J.

    1988-01-01

    Isolated aneurysms of the iliac arteries are rare. They must be considered as a disease pattern of their own as against aneurysms of the abdominal aorta because of the specific anatomical conditions in the pelvis. The clinical symptomatology is determinated by their localisation and topographical relationships within teh pelvis; this can give rise to problems in differential diagnosis primary urological, neurological or gastrointestinal diseases. The prognosis is decisively determined early and correct diagnosis because of the danger of rupture. Sonography, computed tomography and angiography are indispensable aids in preoperative planning. (orig.) [de

  10. [Congenital anomalies of cerebral artery and intracranial aneurysm].

    Science.gov (United States)

    Nakajima, K; Ito, Z; Hen, R; Uemura, K; Matsuoka, S

    1976-02-01

    It is well known that congenital anomalies such as polycystic kidney, aortic coarctation, Marfan syndrome, Ehler-Danlos syndrome are apt to be complicated by intracranial aneurysms. In this report we attempt to reveal the relation and incidence between cerebrovascular anomalies and intracranial aneurysms. The etiology of aneurysms has been discussed, too. 12 cases of persistent trigeminl artery, 2 cases of persistent hypoglossal artery and 11 cases of fenestration were obtained from 3841 patients who were angiographically examined in our clinic for 5 years. The incidence is 0.31%, 0.05% and 0.29%, respectively. Persistent trigeminal arteries were complicated by 2 cases of intracranial aneurysms and one case of arterivenous malformations (AVM), persistent hypoglossal arteries were complicated by one case of aneurysm, and fenestrations were complicated by 2 cases of aneurysms and one case of AVM. One case of congenital agenesis of right internal carotid artery was obtained which was complicated by aneurysm of anterior communicating artery. Totally, 8 cases of aneurysms and AVM were obtained from 26 cases of cerebrovascular anomalies (incidence 30.8%). On the other hand, thalamic or caudate hemorrhage revealed the highest incidence of complication of intracranial aneurysms among intracerebral hematomas (10.7%). Compared with the incidence of aneurysms between cerebro vascular anomalies (30.8%) and thalamic or caudate hemorrhage (10.7%), the difference is statistically signigicant (P less than 0.05). The cause of intracranial aneurysm has not yet been clarified. But it is well accepted that the defect of tunica media vasorum is most responsible factor as to the occurrence of intracranial aneurysms. We concluded that the genetic error of cerebral vessels including defect of media caused intracranial aneurysms, and this result was supported from the evidence that cerebrovascular anomalies showed statistically high incidence of complication of intracranial aneurysms.

  11. Blast wave protection of aqueous foams

    Energy Technology Data Exchange (ETDEWEB)

    Britan, Alexander; Ben-Dor, M. Liverts G. [Shock tube Laboratory of Protective Technologies R and D Center, Department of Mechanical Engineering, Faculty of Engineering Sciences, Ben Gurion University, Beer-Sheva (Israel)

    2011-07-01

    The primary intention of the present study is to present new contribution of shock tube tests to the problem of particle related stabilization and enhanced mitigation action of the wet particulate foams. The experiments reported were designed to examine (i) the reflection of a shock wave from an air/foam face, (ii) the transmission of the shock wave through the air/foam face and (iii) propagation and dispersion of the transmitted shock wave inside the foam column. Because wet aqueous foam of desired specification is difficult to reproduce, handle and quantitatively characterize the fact that experiments on all the above aspects were conducted in a single facility is a potentially important consideration. Moreover vertical position of shock tube simplified the issues since the gradient of the liquid fraction in draining foam coincides with the shock wave propagation. Under these, much simplified test conditions resulted flows could be treated as one-dimensional and the shock wave mitigation depends on three parameters: the intensity of the incident shock wave, s M , the duration of the foam decay, ∆t and on the particle concentration, n.

  12. Tensile and fracture behavior of polymer foams

    International Nuclear Information System (INIS)

    Kabir, Md. E.; Saha, M.C.; Jeelani, S.

    2006-01-01

    Tensile and mode-I fracture behavior of cross-linked polyvinyl chloride (PVC) and rigid polyurethane (PUR) foams are examined. Tension tests are performed using prismatic bar specimens and mode-I fracture tests are performed using single edge notched bend (SENB) specimens under three-point bending. Test specimens are prepared from PVC foams with three densities and two different levels of cross-linking, and PUR foam with one density. Tension and quasi-static fracture tests are performed using a Zwick/Rowell test machine. Dynamic fracture tests are performed using a DYNATUP model 8210 instrumented drop-tower test set up at three different impact energy levels. Various parameters such as specimen size, loading rate, foam density, cross-linking, crack length, cell orientation (flow and rise-direction) and solid polymer material are studied. It is found that foam density and solid polymer material have a significant effect on tensile strength, modulus, and fracture toughness of polymer foams. Level of polymer cross-linking is also found to have a significant effect on fracture toughness. The presence of cracks in the rise- and flow direction as well as loading rate has minimal effect. Dynamic fracture behavior is found to be different as compared to quasi-static fracture behavior. Dynamic fracture toughness (K d ) increases with impact energy. Examination of fracture surfaces reveals that the fracture occurs in fairly brittle manner for all foam materials

  13. Foam-on-Tile Damage Model

    Science.gov (United States)

    Koharchik, Michael; Murphy, Lindsay; Parker, Paul

    2012-01-01

    An impact model was developed to predict how three specific foam types would damage the Space Shuttle Orbiter insulating tiles. The inputs needed for the model are the foam type, the foam mass, the foam impact velocity, the foam impact incident angle, the type being impacted, and whether the tile is new or aged (has flown at least one mission). The model will determine if the foam impact will cause damage to the tile. If it can cause damage, the model will output the damage cavity dimensions (length, depth, entry angle, exit angle, and sidewall angles). It makes the calculations as soon as the inputs are entered (less than 1 second). The model allows for the rapid calculation of numerous scenarios in a short time. The model was developed from engineering principles coupled with significant impact testing (over 800 foam impact tests). This model is applicable to masses ranging from 0.0002 up to 0.4 pound (0.09 up to 181 g). A prior tool performed a similar function, but was limited to the assessment of a small range of masses and did not have the large test database for verification. In addition, the prior model did not provide outputs of the cavity damage length, entry angle, exit angle, or sidewall angles.

  14. Mechanical Characterization of Lightweight Foamed Concrete

    Directory of Open Access Journals (Sweden)

    Marcin Kozłowski

    2018-01-01

    Full Text Available Foamed concrete shows excellent physical characteristics such as low self weight, relatively high strength and superb thermal and acoustic insulation properties. It allows for minimal consumption of aggregate, and by replacement of a part of cement by fly ash, it contributes to the waste utilization principles. For many years, the application of foamed concrete has been limited to backfill of retaining walls, insulation of foundations and roof tiles sound insulation. However, during the last few years, foamed concrete has become a promising material for structural purposes. A series of tests was carried out to examine mechanical properties of foamed concrete mixes without fly ash and with fly ash content. In addition, the influence of 25 cycles of freezing and thawing on the compressive strength was investigated. The apparent density of hardened foamed concrete is strongly correlated with the foam content in the mix. An increase of the density of foamed concrete results in a decrease of flexural strength. For the same densities, the compressive strength obtained for mixes containing fly ash is approximately 20% lower in comparison to the specimens without fly ash. Specimens subjected to 25 freeze-thaw cycles show approximately 15% lower compressive strengths compared to the untreated specimens.

  15. Microstructure of high-strength foam concrete

    International Nuclear Information System (INIS)

    Just, A.; Middendorf, B.

    2009-01-01

    Foam concretes are divided into two groups: on the one hand the physically foamed concrete is mixed in fast rotating pug mill mixers by using foaming agents. This concrete cures under atmospheric conditions. On the other hand the autoclaved aerated concrete is chemically foamed by adding aluminium powder. Afterwards it is cured in a saturated steam atmosphere. New alternatives for the application of foam concretes arise from the combination of chemical foaming and air curing in manufacturing processes. These foam concretes are new and innovative building materials with interesting properties: low mass density and high strength. Responsible for these properties are the macro-, meso- and microporosity. Macropores are created by adding aluminium powder in different volumes and with different particle size distributions. However, the microstructure of the cement matrix is affected by meso- and micropores. In addition, the matrix of the hardened cement paste can be optimized by the specific use of chemical additives for concrete. The influence of aluminium powder and chemical additives on the properties of the microstructure of the hardened cement matrices were investigated by using petrographic microscopy as well as scanning electron microscopy.

  16. Drainage and Stratification Kinetics of Foam Films

    Science.gov (United States)

    Zhang, Yiran; Sharma, Vivek

    2014-03-01

    Baking bread, brewing cappuccino, pouring beer, washing dishes, shaving, shampooing, whipping eggs and blowing bubbles all involve creation of aqueous foam films. Foam lifetime, drainage kinetics and stability are strongly influenced by surfactant type (ionic vs non-ionic), and added proteins, particles or polymers modify typical responses. The rate at which fluid drains out from a foam film, i.e. drainage kinetics, is determined in the last stages primarily by molecular interactions and capillarity. Interestingly, for certain low molecular weight surfactants, colloids and polyelectrolyte-surfactant mixtures, a layered ordering of molecules, micelles or particles inside the foam films leads to a stepwise thinning phenomena called stratification. Though stratification is observed in many confined systems including foam films containing particles or polyelectrolytes, films containing globular proteins seem not to show this behavior. Using a Scheludko-type cell, we experimentally study the drainage and stratification kinetics of horizontal foam films formed by protein-surfactant mixtures, and carefully determine how the presence of proteins influences the hydrodynamics and thermodynamics of foam films.

  17. Tooling Foam for Structural Composite Applications

    Science.gov (United States)

    DeLay, Tom; Smith, Brett H.; Ely, Kevin; MacArthur, Doug

    1998-01-01

    Tooling technology applications for composite structures fabrication have been expanded at MSFC's Productivity Enhancement Complex (PEC). Engineers from NASA/MSFC and Lockheed Martin Corporation have developed a tooling foam for use in composite materials processing and manufacturing that exhibits superior thermal and mechanical properties in comparison with other tooling foam materials. This tooling foam is also compatible with most preimpregnated composite resins such as epoxy, bismaleimide, phenolic and their associated cure cycles. MARCORE tooling foam has excellent processability for applications requiring either integral or removable tooling. It can also be tailored to meet the requirements for composite processing of parts with unlimited cross sectional area. A shelf life of at least six months is easily maintained when components are stored between 50F - 70F. The MARCORE tooling foam system is a two component urethane-modified polyisocyanurate, high density rigid foam with zero ozone depletion potential. This readily machineable, lightweight tooling foam is ideal for composite structures fabrication and is dimensionally stable at temperatures up to 350F and pressures of 100 psi.

  18. DRY MIX FOR OBTAINING FOAM CONCRETE

    Directory of Open Access Journals (Sweden)

    S. N. Leonovich

    2015-01-01

    Full Text Available Composition of a dry mix has been developed for production of non-autoclaved foam concrete with natural curing. The mix has been created on the basis of Portland cement, UFAPORE foaming agent, mineral additives (RSAM sulfoaluminate additive, MK-85 micro-silica and basalt fiber, plasticizing and accelerating “Citrate-T” additive and   redispersible Vinnapas-8034 H powder. It has been established that foam concrete with  density of 400–800 kg/m3, durability of 1,1–3,4 MPa, low water absorption (40–50 %, without shrinkable cracks has been formed while adding water of Water/Solid = 0.4–0.6 in the dry mix,  subsequent mechanical swelling and curing of foam mass.Introduction of the accelerating and plasticizing “Citrate-T” additive into composition of the dry mix leads to an increase of rheological properties in expanded foam mass and  time reduction of its drying and curing. An investigation on microstructure of foam-concrete chipping surface carried out with the help of a scanning electron microscope has shown that the introduction of  basalt fiber and redispersible Vinnapas-8034 H powder into the composition of the dry mix promotes formation of more finely-divided crystalline hydrates. Such approach makes it possible to change purposefully morphology of crystalline hydrates and gives the possibility to operate foam concrete structurization process.

  19. Early experience with transfemoral endovascular aneurysm management (TEAM) in the treatment of aortic aneurysms

    NARCIS (Netherlands)

    Balm, R.; Eikelboom, B. C.; May, J.; Bell, P. R.; Swedenborg, J.; Collin, J.

    1996-01-01

    OBJECTIVES: To evaluate the early experience with transfemoral endovascular aortic aneurysm management using the Endovascular Grafting System. DESIGN: Multi-centre prospective evaluation of the implantation procedure and early results (median follow-up 153 days). SETTING: Department of Surgery,

  20. Fourier analysis of intracranial aneurysms: towards an objective and quantitative evaluation of the shape of aneurysms

    International Nuclear Information System (INIS)

    Rohde, Stefan; Lahmann, Katharina; Nafe, Reinhold; Yan, Bernard; Berkefeld, Joachim; Beck, Juergen; Raabe, Andreas

    2005-01-01

    Shape irregularities of intracranial aneurysms may indicate an increased risk of rupture. To quantify morphological differences, Fourier analysis of the shape of intracranial aneurysms was introduced. We compared the morphology of 45 unruptured (UIA) and 46 ruptured intracranial aneurysms (RIA) in 70 consecutive patients on the basis of 3D-rotational angiography. Fourier analysis, coefficient of roundness and qualitative shape assessment were determined for each aneurysm. Morphometric analysis revealed significantly smaller coefficient of roundness (P<0.02) and higher values for Fourier amplitudes numbers 2, 3 and 7 (P<0.01) in the RIA group, indicating more complex and irregular morphology in RIA. Qualitative assessment from 3D-reconstructions showed surface irregularities in 78% of RIA and 42% of UIA (P<0.05). Our data have shown significant differences in shape between RIA and UIA, and further developments of Fourier analysis may provide an objective factor for the assessment of the risk of rupture. (orig.)

  1. Influence of the glass-calcium carbonate mixture's characteristics on the foaming process and the properties of the foam glass

    DEFF Research Database (Denmark)

    König, Jakob; Petersen, Rasmus Rosenlund; Yue, Yuanzheng

    2014-01-01

    We prepared foam glasses from cathode-ray-tube panel glass and CaCO3 as a foaming agent. We investigated the influences of powder preparation, CaCO3 concentration and foaming temperature and time on the density, porosity and homogeneity of the foam glasses. The results show that the decomposition...

  2. Successful Endovascular Treatment of a Left Common Carotid Artery Aneurysm Following Failed Surgery of a Right Common Carotid Artery Aneurysm

    International Nuclear Information System (INIS)

    Cil, Barbaros E.; Ucar, Ibrahim; Ozsoy, Fatma; Arat, Anil; Yorgancioglu, Cem; Boeke, Erkmen

    2005-01-01

    Aneurysm of the common carotid artery is a rare and serious disease requiring prompt treatment in order to avoid neurologic complications. A 39-year-old man presented with voice impairment and a pulsatile mass at the right side of his neck and was found by color Doppler examination to have bilateral common carotid artery aneurysms of unknown origin. The right-sided large aneurysm was treated with placement of an 8 mm interposition Gore-Tex graft between the right common and internal carotid arteries. The surgical graft thrombosed 7 days after the surgery but the left-sided aneurysm was successfully treated by a Jostent peripheral stent-graft. Color Doppler examination showed a patent stent and no filling of the aneurysm on his first and sixth-month follow-up. Bilateral common carotid artery aneurysm is an exceptionally unusual condition and endovascular treatment of carotid artery aneurysms with covered stents may become an effective treatment alternative for these lesions

  3. Influence of Rubber Powders on Foaming Behavior and Mechanical Properties of Foamed Polypropylene Composites

    Directory of Open Access Journals (Sweden)

    HE Yue

    2017-02-01

    Full Text Available Polypropylene/rubber powders composites with different kinds of rubber powders were foamed by injection molding machine equipped with volume-adjustable cavity. The effect of dispersity of rubber powders and crystallization behavior of composites on the foaming behavior and mechanical properties was investigated. The results show that the addition of rubber powders can improve the cell structure of foamed PP with fine and uniform cell distribution. And cell density and size of PP/PP-MAH/NBR foams are 7.64×106cell/cm3 and 29.78μm respectively, which are the best among these foams. Combining cell structures with mechanical properties, notch impact strength of PP/PP-MAH/CNBR composites increases approximately by 2.2 times while tensile strength is reduced just by 26% compared with those of the pure PP. This indicates that PP/PP-MAH/CNBR composites are ideal foamed materials.

  4. Multifunctional foaming agent to prepare aluminum foam with enhanced mechanical properties

    Science.gov (United States)

    Li, Xun; Liu, Ying; Ye, Jinwen; An, Xuguang; Ran, Huaying

    2018-03-01

    In this paper, CuSO4 was used as foaming agent to prepare close cell Aluminum foam(Al foam) at the temperature range of 680 °C ∼ 758 °C for the first time. The results show that CuSO4 has multifunctional such as, foaming, viscosity increasing, reinforcement in Al matrix, it has a wide decomposition temperature range of 641 °C ∼ 816 °C, its sustain-release time is 5.5 min at 758 °C. The compression stress and energy absorption of CuSO4-Al foam is 6.89 Mpa and 4.82 × 106 J m‑3(compression strain 50%), which are 77.12% and 99.17% higher than that of TiH2-Al foam at the same porosity(76% in porosity) due to the reinforcement in Al matrix and uniform pore dispersion.

  5. FOAM3D: A numerical simulator for mechanistic prediciton of foam displacement in multidimensions

    Energy Technology Data Exchange (ETDEWEB)

    Kovscek, A.R.; Patzek, T.W. [Lawrence Berkeley Laboratory, Berkeley, CA (United States); Radke, C.J. [Univ. of California, Berkeley, CA (United States)

    1995-03-01

    Field application of foam is a technically viable enhanced oil recovery process (EOR) as demonstrated by recent steam-foam field studies. Traditional gas-displacement processes, such as steam drive, are improved substantially by controlling gas mobility and thereby improving volumetric displacement efficiency. For instance, Patzek and Koinis showed major oil-recovery response after about two years of foam injection in two different pilot studies at the Kern River field. They report increased production of 5.5 to 14% of the original oil in place over a five year period. Because reservoir-scale simulation is a vital component of the engineering and economic evaluation of any EOR project, efficient application of foam as a displacement fluid requires a predictive numerical model of foam displacement. A mechanistic model would also expedite scale-up of the process from the laboratory to the field scale. No general, mechanistic, field-scale model for foam displacement is currently in use.

  6. Rigid Polyurethane Foam Reinforced Coconut Coir Fiber Properties

    OpenAIRE

    Mohd Azham Azmi

    2012-01-01

    This research work studied the properties of composite foam panels. Coconut coir fibers were used as reinforcement in polyurethane (PU) foam in order to increase the properties of foam. This composite foam panels were fabricated by using polyurethane molded method. The polyurethane foam panels reinforced from 5 to 20wt% coconut coir were produced to investigate the physical and mechanical test via density test and three point bending test respectively. It was found that the density test resul...

  7. Bilateral Distal Anterior Cerebral Artery Aneurysms Mimicking So-called "Kissing Aneurysms": A Case Report

    OpenAIRE

    山口, 竜一; 伊藤, 宣行; 前村, 栄治; 塩川, 芳昭; 齋藤, 勇; Ryuichi, YAMAGUCHI; Nobuyuki, ITO; Eiji, MAEMURA; Yoshiaki, SHIOKAWA; Isamu, SAITO; 公立阿伎留病院脳神経外科; 公立阿伎留病院脳神経外科; 公立阿伎留病院脳神経外科; 杏林大学医学部脳神経外科; 杏林大学医学部脳神経外科

    2003-01-01

    A 71-year-old woman presented disturbance of consciousness due to subarachnoid hemorrhage (SAH). A computed tomography (CT) on admission revealed diffuse thick SAH and intracerebral hematoma in the right frontal lobe. Conventional angiography and three-dimensional CT angiography showed symmetrical aneurysms located on the bilateral pericallosal arteries at bifurcation of the callosomarginal arteries. The operation was performed on the next day after onset of SAH. The aneurysms were clipped vi...

  8. Foam droplet separation for nanoparticle synthesis

    International Nuclear Information System (INIS)

    Tyree, Corey A.; Allen, Jonathan O.

    2008-01-01

    A novel approach to nanoparticle synthesis was developed whereby foam bubble bursting produced aerosol droplets, an approach patterned after the marine foam aerosol cycle. The droplets were dried to remove solvent, leaving nanometer-sized particles composed of precursor material. Nanoparticles composed of sodium chloride (mean diameter, D-bar p ∼ 100 nm), phosphotungstic acid (D-bar p ∼ 55 nm), and bovine insulin (D p ∼ 5-30 nm) were synthesized. Foam droplet separation can be carried out at ambient temperature and pressure. The 'soft' nature of the process makes it compatible with a wide range of materials

  9. Behaviour of aluminum foam under fire conditions

    Directory of Open Access Journals (Sweden)

    J. Grabian

    2008-07-01

    Full Text Available Taking into account fire-protection requirements it is advantageous for aluminum foam, after melting at a temperature considerably exceeding the melting point, to have a structure of discontinuous suspension of solid inclusions to liquid metal instead of liquid consistency. Continuity of the suspension depends on the solid phase content. The boundary value of the phase determined by J. Śleziona, above which the suspension becomes discontinuous, is provided by the formula (1. Figure 1 presents the relationship graphically. Boundary values of the vs content resulting from the above relationship is too low, taking into account the data obtained from the technology of suspension composites [4]. Therefore, based on the structure assumed for the suspension shown in Figure 2 these authors proposed another way of determining the contents, the value of which is determined by the relationship (3 [5].For purposes of the experimental study presented in the paper two foams have been molten: a commercially available one, made by aluminum foaming with titanium hydride, and a foam manufactured in the Marine Materials Plant of the Maritime University of Szczecin by blowing the AlSi7 +20% SiC composite with argon. Macrophotographs of foam cross-sections are shown in Figure 3. The foams have been molten in the atmosphere of air at a temperature of 750ºC. The products of melting are presented in Figure 4. It appears that molten aluminum foam may have no liquid consistency, being unable to flow, which is a desired property from the point of view of fire-protection. The above feature of the molten foam results from the fact that it may be a discontinuous suspension of solid particles in a liquid metal. The suspended particles may be solid particles of the composite that served for making the foam or oxide membranes formed on extended metal surface of the bubbles included in the foam. The desired foam ability to form a discontinuous suspension after melting may be

  10. Auxetic foam for snowsport safety devices

    OpenAIRE

    Allen, Tom; Duncan, Olly; Foster, Leon; Senior, Terry; Zampieri, Davide; Edeh, Victor; Alderson, Andrew

    2017-01-01

    Skiing and snowboarding are popular snow-sports with inherent risk of injury. There is potential to reduce the prevalence of injuries by improving and implementing snow-sport safety devices with the application of advanced materials. This paper investigates the application of auxetic foam to snow-sport safety devices. Composite pads - consisting of foam covered with a semi-rigid shell - were investigated as a simple model of body armour and a large 70 x 355 x 355 mm auxetic foam sample was fa...

  11. Foam process for application of decontamination agents

    International Nuclear Information System (INIS)

    Harris, J.M.; Miller, J.R.; Frazier, R.S.; Walter, J.H.

    1982-01-01

    This paper presents the results and observations of a study performed by the authors to parametrically evaluate the performance characteristics of a foam process for application of decontamination agents. The initial tests were established to assess foam quality. Subsequent tests determined the ability of the foam as a carrier of chemical systems, and established system operating parameters. The technique was then applied in an actual decontamination task to verify effectiveness of these established parameters and to determine decontamination reduction factors. 4 figures, 5 tables

  12. Genetic study of intracranial aneurysms.

    Science.gov (United States)

    Yan, Junxia; Hitomi, Toshiaki; Takenaka, Katsunobu; Kato, Masayasu; Kobayashi, Hatasu; Okuda, Hiroko; Harada, Kouji H; Koizumi, Akio

    2015-03-01

    Rupture of intracranial aneurysms (IAs) causes subarachnoid hemorrhage, leading to immediate death or severe disability. Identification of the genetic factors involved is critical for disease prevention and treatment. We aimed to identify the susceptibility genes for IAs. Exome sequencing was performed in 12 families with histories of multiple cases of IA (number of cases per family ≥3), with a total of 42 cases. Various filtering strategies were used to select the candidate variants. Replicate association studies of several candidate variants were performed in probands of 24 additional IA families and 426 sporadic IA cases. Functional analysis for the mutations was conducted. After sequencing and filtering, 78 variants were selected for the following reasons: allele frequencies of variants in 42 patients was significantly (PIA within ≥1 family; variants predicted damage to the structure or function of the protein by PolyPhen-2 (Polymorphism Phenotyping V2) and SIFT (Sorting Intolerance From Tolerant). We selected 10 variants from 9 genes (GPR63, ADAMST15, MLL2, IL10RA, PAFAH2, THBD, IL11RA, FILIP1L, and ZNF222) to form 78 candidate variants by considering commonness in families, known disease genes, or ontology association with angiogenesis. Replicate association studies revealed that only p.E133Q in ADAMTS15 was aggregated in the familial IA cases (odds ratio, 5.96; 95% confidence interval, 2.40-14.82; P=0.0001; significant after the Bonferroni correction [P=0.05/78=0.0006]). Silencing ADAMTS15 and overexpression of ADAMTS15 p.E133Q accelerated endothelial cell migration, suggesting that ADAMTS15 may have antiangiogenic activity. ADAMTS15 is a candidate gene for IAs. © 2015 American Heart Association, Inc.

  13. Surgical clipping as the preferred treatment for aneurysms of the middle cerebral artery

    NARCIS (Netherlands)

    van Dijk, J. Marc C.; Groen, Rob J. M.; Ter Laan, Mark; Jeltema, Johanna Rinck; Mooij, Jan Jacob A.; Metzemaekers, Jan D. M.

    2011-01-01

    In recent years the endovascular treatment of intracranial aneurysms (coiling) has progressively gained recognition, particularly after the publication of the International Subarachnoid Aneurysm Trial (ISAT) in 2002. Despite the fact that in ISAT middle cerebral artery (MCA) aneurysms were clearly

  14. Hemodynamic response during aneurysm clipping surgery among experienced neurosurgeons.

    Science.gov (United States)

    Bunevicius, Adomas; Bilskiene, Diana; Macas, Andrius; Tamasauskas, Arimantas

    2016-02-01

    Neurosurgery is a challenging field associated with high levels of mental stress. The goal of this study was to investigate the hemodynamic response of experienced neurosurgeons during aneurysm clipping surgery and to evaluate whether neurosurgeons' hemodynamic responses are associated with patients' clinical statuses. Four vascular neurosurgeons (all male; mean age 51 ± 10 years; post-residency experience ≥7 years) were studied during 42 aneurysm clipping procedures. Blood pressure (BP) and heart rate (HR) were assessed at rest and during seven phases of surgery: before the skin incision, after craniotomy, after dural opening, after aneurysm neck dissection, after aneurysm clipping, after dural closure and after skin closure. HR and BP were significantly greater during surgery relative to the rest situation (p ≤ 0.03). There was a statistically significant increase in neurosurgeons' HR (F [6, 41] = 10.88, p neurosurgeon experience, the difference in BP as a function of aneurysm rupture was not significant (p > 0.08). Aneurysm location, intraoperative aneurysm rupture, admission WFNS score, admission Glasgow Coma Scale scores and Fisher grade were not associated with neurosurgeons' intraoperative HR and BP (all p > 0.07). Aneurysm clipping surgery is associated with significant hemodynamic system activation among experienced neurosurgeons. The greatest HR and BP were after aneurysm neck dissection and clipping. Aneurysm location and patient clinical status were not associated with intraoperative changes of neurosurgeons' HR and BP.

  15. Hemodynamics Modeling and Simulation of Anterior Communicating Artery Aneurysms

    Directory of Open Access Journals (Sweden)

    Jianjun Li

    2014-07-01

    Full Text Available It is a general agreement that hemodynamics plays very important role in the initiation, growth, and rupture of cerebral aneurysms and hemodynamics in the anterior communicating artery aneurysms is considered the most complex in all cerebral aneurysms and it is difficult to find some reasonable relationship between the hemodynamics parameters and the rupture risk. In this paper, the 3D geometries of four anterior communicating artery aneurysms were generated from the CTA data and the computational models with bilateral feeding arteries for the four aneurysms were constructed. The blood flow was simulated by computational fluid dynamics software and the hemodynamics parameters such as velocity, wall shear stress, and oscillatory shear index were calculated. The following results were observed: one of the four models only needs the left feeding artery; the max normalized wall shear stress locates at the aneurysmal neck of the largest aneurysm; the max oscillatory shear index locates at the aneurysmal sac of the largest aneurysm. The conclusion was drawn that the anterior communicating artery aneurysm has higher rupture risk from the hemodynamics viewpoint if the max wall shear stress locates at the neck and the max oscillatory shear index locates at the dome.

  16. Intracranial aneurysms: evaluation in 200 patients with spiral CT angiography

    International Nuclear Information System (INIS)

    Young, N.; Kingston, R.J.; Markson, G.; Dorsch, N.W.C.; McMahon, J.

    2001-01-01

    The goal of this study was to assess the usefulness of spiral CT angiography (CTA) with three- dimensional reconstructions in defining intracranial aneurysms, particularly around the Circle of Willis. Two hundred consecutive patients with angiographic and/or surgical correlation were studied between 1993 and 1998, with CTA performed on a GE HiSpeed unit and Windows workstation. The following clinical situations were evaluated: conventional CT suspicion of an aneurysm; follow-up of treated aneurysm remnants or of untreated aneurysms; subarachnoid haemorrhage (SAH) and negative angiography; family or past aneurysm history; and for improved definition of aneurysm anatomy. Spiral CTA detected 140 of 144 aneurysms, and an overall sensitivity of 97%, including 30 of 32 aneurysms 3 mm or less in size. In 38 patients with SAH and negative angiography, CTA found six of the seven aneurysms finally diagnosed. There was no significant artefact in 17 of 23 patients (74%) with clips. The specificity of CTA was 86% with 8 false-positive cases. Spiral CTA is very useful in demonstrating intracranial aneurysms. (orig.)

  17. Hemodynamics before and after bleb formation in cerebral aneurysms

    Science.gov (United States)

    Cebral, Juan R.; Radaelli, Alessandro; Frangi, Alejandro; Putman, Christopher M.

    2007-03-01

    We investigate whether blebs in cerebral aneurysms form in regions of low or high wall shear stress (WSS), and how the intraaneurysmal hemodynamic pattern changes after bleb formation. Seven intracranial aneurysms harboring well defined blebs were selected from our database and subject-specific computational models were constructed from 3D rotational angiography. For each patient, a second anatomical model representing the aneurysm before bleb formation was constructed by smoothing out the bleb. Computational fluid dynamics simulations were performed under pulsatile flow conditions for both models of each aneurysm. In six of the seven aneurysms, the blebs formed in a region of elevated WSS associated to the inflow jet impaction zone. In one, the bleb formed in a region of low WSS associated to the outflow zone. In this case, the inflow jet maintained a fairly concentrated structure all the way to the outflow zone, while in the other six aneurysms it dispersed after impacting the aneurysm wall. In all aneurysms, once the blebs formed, new flow recirculation regions were formed inside the blebs and the blebs progressed to a state of low WSS. Assuming that blebs form due to a focally damaged arterial wall, these results seem to indicate that the localized injury of the vessel wall may be caused by elevated WSS associated with the inflow jet. However, the final shape of the aneurysm is probably also influenced by the peri-aneurysmal environment that can provide extra structural support via contact with structures such as bone or dura matter.

  18. Endovascular treatment of renal aneurysms: A series of 18 cases

    International Nuclear Information System (INIS)

    Sédat, J.; Chau, Y.; Baque, J.

    2012-01-01

    Purpose: To retrospectively analyze the results and complications of the endovascular treatment of 18 renal aneurysms. Methods: From 2002 to 2011, 15 patients (aged 31–76), with 18 renal aneurysms, were admitted in our institution for treatment by embolization. Except one, all were wide-necked aneurysms. One aneurysm was treated by occluding the parent artery considering its distal location; a small-necked aneurysm was treated by simple coiling, and the remaining 16 were embolized utilizing adjunctive techniques to protect the parent artery. We analyzed the rates of technical success, complication and clinical consequence, post-operative occlusion and recurrence. Results: There was a 100% technical success rate. 15 aneurysms showed a total occlusion on the post-treatment angiogram. 2 aneurysms demonstrated neck remnants, and one had an intrasaccular residual in-flow. Two minor post-operative complications were encountered but resolved over time. No delayed clinical complications were observed and the long-term angiographic follow-up demonstrated stability of the occlusion of the target renal aneurysm with no major recurrence. Conclusion: Complications of the embolization of renal aneurysms are rare. Endovascular treatment should therefore be considered at first for the treatment of renal aneurysms.

  19. Rerupture of intracranial aneurysms: a clinicoanatomic study

    NARCIS (Netherlands)

    Hijdra, A.; Vermeulen, M.; van Gijn, J.; van Crevel, H.

    1987-01-01

    In a series of 176 prospectively studied patients who survived for at least 24 hours after aneurysmal subarachnoid hemorrhage, 39 had at least one computerized tomography (CT)-proven rebleed within 4 weeks after the first rupture. There were peaks in the incidence of rebleeding at the end of the 2nd

  20. Natural history of abdominal aortic aneurysm

    DEFF Research Database (Denmark)

    Perko, M J; Schroeder, T V; Olsen, P S

    1993-01-01

    During a 10-year period in which 735 patients presented with abdominal aortic aneurysms to our clinic, 63 were not offered operative treatment. The primary reason for choosing conservative treatment was concomitant diseases that increased the risk of operation. After 2 years of followup, half...

  1. Genetics of intracranial aneurysms and related diseases

    NARCIS (Netherlands)

    van 't Hof, F.N.G.

    2017-01-01

    Intracranial aneurysms (IA) are dilatations of the vessel walls of cerebral arteries. Some can rupture and result in a subarachnoid hemorrhage (SAH), a severe subtype of stroke. This thesis is set out to elucidate the pathophysiology of IA from a genetic perspective. The main conclusions are: 1.

  2. Brain Aneurysm Warning Signs/Symptoms

    Science.gov (United States)

    ... Susco Chair of Research North Shore University Hospital, Brain Aneurysm Center Chair of Research The Christopher C. Getch, MD Chair of Research Carol W. Harvey Memorial Chair of Research Kristen’s Legacy of Love Chair of Research TeamCindy Alcatraz Chair of Research ...

  3. Ruptured Cervical Aneurysm with Neurofibromatosis | Smith | South ...

    African Journals Online (AJOL)

    A case is presented of spontaneous rupture of an aneurysm of a lateral branch of the right thyrocervical trunk in a patient suffering from diffuse neurofibromatosis. The operative findings are reported. S. Afr. Med. J., 48, 945 (1974). Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT ...

  4. Submitral Left Ventricular Aneurysm Associated with Thrombus

    African Journals Online (AJOL)

    2018-01-01

    Jan 1, 2018 ... easy fatigabilityof two weeks duration. She had no history of ... Figure 2: Parasternal short axis view of submitral aneurysm. Figure 3: Apical ... its various modalities; 2D, 3D, color Doppler, contrast and ... Current multi- detector ...

  5. Mycotic coronary aneurysm: report of two cases

    International Nuclear Information System (INIS)

    Vallejo G, Franco J; Eusse, Carlos; Tenorio, Carlos; Uribe, Carlos; Fernandez, Andres; Ortiz, Juan C

    2010-01-01

    In recent years, the number of percutaneous interventions with stent implantation has increased dramatically. Despite the boom in this device, reports of infections are extremely rare. This article reports two cases of mycotic aneurysms after implantation of stents with different clinical presentation and evolution.

  6. The mechanism of cerebral aneurysmal formation

    International Nuclear Information System (INIS)

    Yokoi, Toshihiro; Nozaki, Kazuhiko

    2010-01-01

    Cerebral aneurysm is a disease of poor prognosis and MR- and CT-angiographies are used for its diagnosis and in the preventive therapy of its rupture. Here discussed are formation and growth leading to rupture of the lesion for its advanced diagnosis and prevention of rupturing. Beginning from findings in animal experimentation in mice, rats and monkeys, discussed are pathology of the aneurysm, genes related with its formation, molecular biological approaches concerning apoptosis and NF-kB/TNF-α related inflammatory reactions, participation of sex hormone, clinical hemodynamic analyses based on 3D data from CT and MRI findings, and clinical studies. Authors consider that local hemodynamic stress loading is possibly related to cerebral aneurysm formation as it is yielded at the loading part of the vessel in human and in animal models. The aneurysm is possibly a result of remodeling disturbance by the load and subsequent excessive involution of the artery. In the process, probably included are the inflammation, apoptosis, degradation of extracellular matrix and functional impairment of endotherial cells. Future elucidation of molecular mechanisms underlying the aneurismal growth and rupture will bring about the improved treatment to prevent the disease by stabilizing the aneurismal wall. (T.T.)

  7. Management of Extracranial Carotid Artery Aneurysm

    NARCIS (Netherlands)

    Welleweerd, J. C.; den Ruijter, H. M.; Nelissen, B. G. L.; Bots, M. L.; Kappelle, L. J.; Rinkel, G. J. E.; Moll, F. L.; de Borst, G. J.

    Introduction: Aneurysms of the extracranial carotid artery (ECAA) are rare. Several treatments have been developed over the last 20 years, yet the preferred method to treat ECAA remains unknown. This paper is a review of all available literature on the risk of complications and long-term outcome

  8. Totally thrombosed giant anterior communicating artery aneurysm

    Directory of Open Access Journals (Sweden)

    V R Roopesh Kumar

    2015-01-01

    Full Text Available Giant anterior communicating artery aneurysmsarerare. Apatient presented with visual dysfunction, gait ataxia and urinary incontinence. MRI showed a giant suprasellar mass.At surgery, the lesion was identified as being an aneurysm arising from the anterior communicating artery.The difficulty in preoperative diagnosis and relevant literature are reviewed.

  9. Continuous EEG Monitoring in Aneurysmal Subarachnoid Hemorrhage

    DEFF Research Database (Denmark)

    Kondziella, Daniel; Friberg, Christian Kærsmose; Wellwood, Ian

    2015-01-01

    BACKGROUND: Continuous EEG (cEEG) may allow monitoring of patients with aneurysmal subarachnoid hemorrhage (SAH) for delayed cerebral ischemia (DCI) and seizures, including non-convulsive seizures (NCSz), and non-convulsive status epilepticus (NCSE). We aimed to evaluate: (a) the diagnostic...

  10. Endovascular coil embolization for anterior choroidal artery aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Byung Moon; Chung, Eun Chul [Sungkyunkwan University School of Medicine, Department of Radiology, Kangbuk Samsung Hospital, Seoul (Korea); Kim, Dong Ik; Kim, Dong Joon; Suh, Sang Hyun [Yonsei University College of Medicine, Department of Radiology, Seoul (Korea); Kim, Sun Yong [Ajou University College of Medicine, Department of Radiology, Suwon (Korea); Shin, Yong Sam [Ajou University College of Medicine, Department of Neurosurgery, Suwon (Korea); Park, Sung Il [Soonchunhyang University College of Medicine, Department of Radiology, Bucheon Hospital, Bucheon (Korea); Choi, Chun Sik; Won, Yu.Sam [Sungkyunkwan University School of Medicine, Department of Neurosurgery, Kangbuk Samsung Hospital, Seoul (Korea)

    2008-03-15

    We retrospectively evaluated the ischemic complications related to the anterior choroidal artery (AChA) and clinical outcome after coiling of AChA aneurysms. We included 37 patients (27 with subarachnoid hemorrhage, 10 without) harboring 38 AChA aneurysms (23 ruptured, 15 unruptured) who were treated by coiling at four institutions. Ischemic complications related to the AChA and clinical outcomes were retrospectively evaluated. Intraprocedural transient AChA occlusion occurred in five aneurysms, all of which had AChA incorporated into the aneurysm neck. Two of the five patients suffered postprocedural transient contralateral hemiparesis, but recovered completely. The remaining three patients had no postprocedural symptoms. Incidence of transient AChA occlusion was significantly higher in those aneurysms in which the AChA was incorporated into aneurysm neck (group 2) than in those in which the AChA was not incorporated (group 1). Of the 37 patients, 31 (83.8%) had good recoveries (modified Rankin scale score 0-2). Two patients died from the consequences of subarachnoid hemorrhage. During follow-up for a mean of 27 months (range 4-72 months), none of the 35 living patients re-bled. A total of 29 aneurysms in 28 patients were followed-up angiographically. Recurrences were found in 5 of the 29 aneurysms during follow-up (mean 18 months, range 6-45 months). Re-embolization achieved near complete occlusion of two recurrent aneurysms, both of which were still stable at the time of the next two follow-up angiographies. The other three recurrent aneurysms were not retreated due to the small size of the recurrences. Coiling of AChA aneurysms resulted in good outcomes without AChA-related permanent ischemic complications. Transient AChA occlusion, potentially associated with ischemic complications, was significantly more frequent in the aneurysm in which the AChA was incorporated into the aneurysm neck. (orig.)

  11. Recurrence of ICA-PCoA aneurysms after neck clipping.

    Science.gov (United States)

    Sakaki, T; Takeshima, T; Tominaga, M; Hashimoto, H; Kawaguchi, S

    1994-01-01

    Between 1975 and 1992, 2211 patients underwent aneurysmal neck clipping at the Nara Medical University clinic and associated hospitals. The aneurysm in 931 of these patients was situated at the junction of the internal carotid artery (ICA) and posterior communicating artery (PCoA). Seven patients were readmitted 4 to 17 years after the first surgery because of regrowth and rupture of an ICA-PCoA aneurysmal sac that had arisen from the residual neck. On angiograms obtained following aneurysmal neck clipping, a large primitive type of PCoA was demonstrated in six patients and a small PCoA in one. A small residual aneurysm was confirmed in only two patients and angiographically complete neck clipping in five. Recurrent ICA-PCoA aneurysms were separated into two types based on the position of the old clip in relation to the new growth. Type 1 aneurysms regrow from the entire neck and balloon eccentrically. In this type, it is possible to apply the clip at the neck as in conventional clipping for a ruptured aneurysm. Type 2 includes aneurysms in which the proximal portion of a previous clip is situated at the corner of the ICA and aneurysmal neck and the distal portion on the enlarged dome of the aneurysm, because the sac is regrowing from a portion of the residual neck. In this type of aneurysm, a Sugita fenestrated clip can occlude the residual neck, overriding the old clip. Classifying these aneurysms into two groups is very useful from a surgical point of view because it is possible to apply a new clip without removing the old clip, which was found to be adherent to surrounding tissue.

  12. Flame Retardants Used in Flexible Polyurethane Foam

    Science.gov (United States)

    The partnership project on flame retardants in furniture seeks to update the health and environmental profiles of flame-retardant chemicals that meet fire safety standards for upholstered consumer products with polyurethane foam

  13. Feynman propagator for spin foam quantum gravity.

    Science.gov (United States)

    Oriti, Daniele

    2005-03-25

    We link the notion causality with the orientation of the spin foam 2-complex. We show that all current spin foam models are orientation independent. Using the technology of evolution kernels for quantum fields on Lie groups, we construct a generalized version of spin foam models, introducing an extra proper time variable. We prove that different ranges of integration for this variable lead to different classes of spin foam models: the usual ones, interpreted as the quantum gravity analogue of the Hadamard function of quantum field theory (QFT) or as inner products between quantum gravity states; and a new class of causal models, the quantum gravity analogue of the Feynman propagator in QFT, nontrivial function of the orientation data, and implying a notion of "timeless ordering".

  14. Coated foams, preparation, uses and articles

    Science.gov (United States)

    Duchane, D.V.; Barthell, B.L.

    1982-10-21

    Hydrophobic cellular material is coated with a thin hydrophilic polymer skin which stretches tightly over the foam but which does not fill the cells of the foam, thus resulting in a polymer-coated foam structure having a smoothness which was not possible in the prior art. In particular, when the hydrophobic cellular material is a specially chosen hydrophobic polymer foam and is formed into arbitrarily chosen shapes prior to the coating with hydrophilic polymer, inertial confinement fusion (ICF) targets of arbitrary shapes can be produced by subsequently coating the shapes with metal or with any other suitable material. New articles of manufacture are produced, including improved ICF targets, improved integrated circuits, and improved solar reflectors and solar collectors. In the coating method, the cell size of the hydrophobic cellular material, the viscosity of the polymer solution used to coat, and the surface tension of the polymer solution used to coat are all very important to the coating.

  15. Grandstand view of phenolic foam insulation

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    Stadium Insulation Ltd, manufacture pipe sections, tank and vessel insulation products in Lowphen, polyisocyanurate, polyurethane foams and expanded polystyrene, though for certain specialist applications, cork is still employed in small quantities. Currently the emphasis is very much on Lowphen, the company's range of pipe sections based on phenolic foam. The company's manufacturing and marketing effort reflects the increasing market trend towards the use of insulating material capable of withstanding higher temperatures, and phenolic foam neatly satisfies the demand since it is capable of use at temperatures up to 140/sup 0/C. Moreover, phenolic foam has the lowest K value at 0.02W/m/sup 0/C of any of the currently available range of insulating materials, and while the product is slightly more expensive than alternatives such as polyisocyanurate and polyurethane, its high performance offsets that premium.

  16. Hepatic artery aneurysm repair: a case report

    Directory of Open Access Journals (Sweden)

    Jaunoo SS

    2009-01-01

    Full Text Available Abstract Introduction Hepatic artery aneurysms remain a clinically significant entity. Their incidence continues to rise slowly and mortality from spontaneous rupture is high. Repair is recommended in those aneurysms greater than 2 cm in diameter. It is not surprising that vascular comorbidities, such as ischaemic heart disease, are common in surgical patients, particularly those with arterial aneurysms such as these. The decision of when to operate on patients who require urgent surgery despite having recently suffered an acute coronary syndrome remains somewhat of a grey and controversial area. We discuss the role of delayed surgery and postoperative followup of this vascular problem. Case presentation A 58-year-old man was admitted with a 5.5 cm hepatic artery aneurysm. The aneurysm was asymptomatic and was an incidental finding as a result of an abdominal computed tomography scan to investigate an episode of haemoptysis (Figure 1. Three weeks prior to admission, the patient had suffered a large inferior myocardial infarction and was treated by thrombolysis and primary coronary angioplasty. Angiographic assessment revealed a large aneurysm of the common hepatic artery involving the origins of the hepatic, gastroduodenal, left and right gastric arteries and the splenic artery (Figures 2 and 3. Endovascular treatment was not considered feasible and immediate surgery was too high-risk in the early post-infarction period. Therefore, surgery was delayed for 3 months when aneurysm repair with reconstruction of the hepatic artery was successfully performed. Graft patency was confirmed with the aid of an abdominal arterial duplex. Plasma levels of conventional liver function enzymes and of alpha-glutathione-S-transferase were within normal limits. This was used to assess the extent of any hepatocellular damage perioperatively. The patient made a good recovery and was well at his routine outpatient check-ups. Conclusion There is no significant

  17. Adhesion aspects of polyurethane foam sandwich panels.

    OpenAIRE

    Ng, Simon L.

    2016-01-01

    Sandwich panels, polyurethane foam sandwiched between two sheets of steel, form the walls and roofs in the construction of buildings. ArcelorMittal is a manufacturer of the steel as well as these finished panels. For this project they combined with a supplier of the polyurethane foams, Huntsman Polyurethanes, to joint-fund a research project investigating the fundamental mechanisms of adhesion, as well as the causes of failures in the product which manifests primarily in two different ways...

  18. Measurement of radiant properties of ceramic foam

    International Nuclear Information System (INIS)

    Hoornstra, J.; Turecky, M.; Maatman, D.

    1994-07-01

    An experimental facility is described for the measurement of the normal spectral and total emissivity and transmissivity of semi-transparent materials in the temperature range of 600 C to 1200 C. The set-up was used for the measurement of radiation properties of highly porous ceramic foam which is used in low NO x radiant burners. Emissivity and transmissivity data were measured and are presented for coated and uncoated ceramic foam of different thicknesses. (orig.)

  19. New supply for canyon fire foam system

    International Nuclear Information System (INIS)

    Gainey, T.

    1995-01-01

    The raw water supply for the B-Plant Canyon fire foam system is being replaced. The 4 inche water supply line to the foam system is being rerouted from the 6 inches raw water line in the Pipe Gallery to the 10 inches raw water main in the Operating Gallery. This document states the acceptance criteria for the flushing and testing to be performed by the contractor

  20. Foam radiators for transition radiation detectors

    International Nuclear Information System (INIS)

    Chernyatin, V.; Dolgoshein, B.; Gavrilenko, I.; Potekhin, M.; Romaniouk, A.; Sosnovtsev, V.

    1993-01-01

    A wide variety of foam radiators, potentially useful in the design of a transition radiation detector, the possible particle identification tool in collider experiments, have been tested in the beam. Various characteristics of these radiators are compared, and the conclusion is reached that certain brands of polyethylene foam are best suited for use in the detector. Comparison is made with a 'traditional' radiator, which is a periodic structure of plastic foils. (orig.)

  1. Mechanical Characterization of Lightweight Foamed Concrete

    OpenAIRE

    Marcin Kozłowski; Marta Kadela

    2018-01-01

    Foamed concrete shows excellent physical characteristics such as low self weight, relatively high strength and superb thermal and acoustic insulation properties. It allows for minimal consumption of aggregate, and by replacement of a part of cement by fly ash, it contributes to the waste utilization principles. For many years, the application of foamed concrete has been limited to backfill of retaining walls, insulation of foundations and roof tiles sound insulation. However, during the last ...

  2. Structure formation control of foam concrete

    Science.gov (United States)

    Steshenko, Aleksei; Kudyakov, Aleksander; Konusheva, Viktoriya; Syrkin, Oleg

    2017-01-01

    The process of predetermined foam concrete structure formation is considered to be a crucial issue from the point of process control and it is currently understudied thus defining the need for additional research. One of the effective ways of structure formation control in naturally hardening foam concrete is reinforcement with dispersed fibers or introduction of plasticizers. The paper aims at studying the patterns of influence of microreinforcing and plasticizing additives on the structure and performance properties of foam concrete. Preparation of foam concrete mix has been conducted using one-step technology. The structure of modified foam concrete has been studied by means of electron microscopy. The cellular structure of foam concrete samples with the additives is homogeneous; the pores are uniformly distributed over the total volume. It has been revealed that introduction of the Neolas 5.2 plasticizer and microreinforcing fibers in the foam concrete mixture in the amount of 0.4 - 0.1 % by weight of cement leads to reduction of the average pore diameter in the range of 45.3 to 30.2 microns and the standard deviation of the pore average diameter from 23.6 to 9.2 in comparison with the sample without additive. Introduction of modifying additives has stimulated formation of a large number of closed pores. Thus porosity of conditionally closed pores has increased from 16.06 % to 34.48 %, which has lead to increase of frost resistance brand of foam concrete from F15 to F50 and to reduction of its water absorption by weight by 20 %.

  3. The OpenFOAM technology primer

    CERN Document Server

    Maric, Tomislav; Mooney, Kyle

    2014-01-01

    This book covers two main aspects of working with OpenFOAM: using the applications and developing and extending the library code. In the first part of the book, we chose a few utilities and applications to describe the OpenFOAM work flow. This information should provide a sufficient starting point for the reader, who can investigate his/her interests further by following the provided instructions in a similar way for another solver or application.

  4. BUDAYA KERJA GURU PENDIDIKAN DASAR UNGGUL (Studi Situs SMP Negeri 1 Gunung Jati Cirebon

    Directory of Open Access Journals (Sweden)

    Sri Handayani

    2015-07-01

    Full Text Available This study is aimed at describing the working culture of administration, teaching learning activities, and evaluating the teaching learning process of accelerated class of SMP 1 Gunung Jati Cirebon teachers in doing their job. This study applies the qualitative of ethnographic that is to see directly the working culture of the subject of the study such as their behavior, their motivation, their perception and their action related to good teachers working culture. The data are taken from interviews with teachers, documents related of teachers job, and field study. In collecting the data, the researcher carried our interview with teachers, doing some observations, and study the documents related to teachers’ job. The data are analyzed and tested using credibility, dependability, and confirm ability tests.The results of the study are: (1 the teachers working culture in doing their administrative means how a teacher increases work such as developing syllabus, making lesson plan, developing indicators, and developing teachers materials. Teachers’ working culture in developing their administration work are developed in school and region teacher forum; (2 teachers working culture in teaching learning activities means how teacher increases work such as make, introduction activity, core activity, and final activity in the teaching and learning process as indicated by the curriculum. (3 teachers working culture in evaluating the teaching learning process means how teacher increases work such as compilation planning of assessment and execution of assessment. The study suggests: (1 the headmaster should give opportunities for teacher to develop their work so that they can contribute to the administration, classroom teaching learning process, evaluation and analysis; (2 the teachers can improve their work such as the administration, classroom teaching learning process, and evaluation of study with activities or constructions by school, duty education

  5. HASIL BELAJAR ASPEK KETERAMPILAN IPA PADA PEMBELAJARAN LEVEL OF INQUIRY TINGKAT INQUIRY LESSON DI SMP

    Directory of Open Access Journals (Sweden)

    Yeni Hariningsih

    2016-08-01

    Full Text Available Learning science in junior high school in general is focused on mastery of concepts and basic science has not yet developed abilities, such as the ability berinkuiri. Therefore, it is necessary to find the appropriate steps to improve the process of learning science. The purpose of the study iniuntuk improve learning outcomes by using the skill aspect of inquiry learning model level. The method used in this research is mixed method. The instrument used is the syllabus, lesson plans, and the observation sheet keterampilan.Teknik data collection using observation. Aspects of data analysis skills using data reduction method, coding and interpretation. Results of research conducted on 36 students showed the ability berinkuiri learners increased by using the model level of inquiry. Results of learners aspect of overall skill increases with the good category. The conclusion from this study that the use of models level of inquiry to improve the ability berinkuiri learners and improve learning outcomes aspects of science skills of learners. Pembelajaran IPA di SMP pada umumnya masih menekankan pada penguasaan konsep dan belum mengembangkan kemampuan dasar sains, seperti kemampuan berinkuiri.Oleh karena itu perlu ditemukan langkah yang tepat untuk memperbaiki proses pembelajaran IPA. Tujuan dari penelitian iniuntuk meningkatkan hasil belajar aspek keterampilan dengan menggunakan model pembelajaran level of inquiry. Metode yang digunakan dalam penelitian ini yaitu mixed methode. Instrumen yang digunakan yaitu Silabus, RPP dan lembar observasi keterampilan. Teknik pengumpulan data menggunakan observasi. Analisis data aspek keterampilan dengan menggunakan cara mereduksi data, pengkodean dan interpretasi. Hasil penelitian yang dilakukan pada 36 peserta didik menunjukkan kemampuan berinkuiri peserta didik mengalami peningkatan dengan menggunakan model level of inquiry. Hasil belajar peserta didik aspek keterampilan secara keseluruhan meningkat dengan dengan

  6. KELEKATAN ANAK DENGAN IBU DAN AYAH SERTA PERILAKU PORNOGRAFI PADA ANAK USIA SMP

    Directory of Open Access Journals (Sweden)

    Rika Hardani Hardani

    2017-08-01

    Full Text Available The mother’s attachment and father’s attachment with children were formed since childhood, will influence the future development of the child's personality. A good personality will make children able to choose good behavior and not to fall into negative behaviors such as behavioral pornography. The research aimed is to analyze the influence of mother-child's attachment and father-child’s attachment on the behavior of school-age child pornography (SMP. The choice of location was purposively in South Tangerang City. A total of 600 children aged junior consisting of 278 men and 322 women were selected using cluster random sampling technique with the class as a cluster of selected schools in the study sites. Respondents were asked to fill out questionnaires of the Inventory of Parent and Peer Attachment (IPPA and the questionnaire Pornography Behavior. Data were analyzed with descriptive analysis, correlation, and regression. The results showed that the boys and girls of mother’s attachment score higher than father’s attachment scores. Behavior pornography on boys is higher than girls. The mother’s attachment and father’s attachment showed a significant negative correlation with the behavior of pornography. Regression analysis showed that family income significant positive effect on the behavior of pornography. Instead, the mother’s attachment and father’s attachment significant negative effect on the behavior of pornography.

  7. PEMBELAJARAN BERBASIS MASALAH UNTUK MENINGKATKAN PEMAHAMAN KONSEP MATEMATIKA PADA MATERI SEGIEMPAT SISWA SMP

    Directory of Open Access Journals (Sweden)

    Muh Fitrah

    2017-04-01

    Full Text Available Penelitian ini bertujuan untuk menjelaskan aktivitas guru dan siswa pada pembelajaran berbasis masalah yang dapat meningkatkan pemahaman konsep siswa dan peningkatan pemahaman konsep siswa pada konsep matematika materi segiempat serta respon siswa pada pembelajaran berbasis masalah. Penelitian ini menggunakan penelitian tindakan kelas bersifat kualitatif dan kuantitatif. Subjek penelitian adalah siswa SMP Negeri 1 Dompu Kelas VIIA sebanyak 34 Orang. Instrumen yang digunakan adalah lembar tes, observasi dan wawancara, angket serta dokemen. Data penelitian inipun dianalisis dalam bentuk rata-rata dan persentase kemudian dikombinasikan dengan hasil wawancara yang bersumber dari guru dan siswa. Hasil penelitian menunjukkan bahwa pemahaman konsep siswa dapat ditingkatkan menggunakan pembelajaran berbasis masalah, terbukti pada peningkatan setiap siklus pembelajaran. Hal ini didukung pada aktivitas guru dan siswa berdasarkan langkah-langkah pada pembelajaran berbasis masalah yaitu pada siklus pertama aktivitas guru dengan presentasenya 92,5% meningkat disiklus kedua sebesar 97,5%, sedangkan aktivitas siswa disiklus pertama dengan presentasenya adalah 93,8% dan meningkat pada siklus kedua sebesar 97,69%. Sedangkan pada hasil tes pemahaman konsepnya adalah pada siklus pertama adalah 79, 41% dengan rata-rata nilainya adalah 77,35 dan pada siklus kedua pemahaman konsep matematika siswa meningkat secara signifikan, hal ini terbukti presentasenya adalah 88,24% dengan rata-rata nilainya adalah 84,26. Sehingga pencapaian antara aktivitas guru dan siswa serta pemahaman konsep matematika siswa pada pembelajaran berbasis masalah mendapatkan respon yang positif berdasarkan transkripsi dari siswa, karena siswa merasa senang dengan suasana belajar yang memaksimalkan aktivitas pada kelompok yang dibagikan.

  8. Contribution of the backstreaming ions to the Self-Magnetic pinch (SMP) diode current

    Energy Technology Data Exchange (ETDEWEB)

    Mazarakis, Michael G.; Cuneo, Michael E.; Fournier, Sean D.; Johnston, Mark D.; Kiefer, Mark L.; Leckbee, Joshua J.; Nielsen, Dan S.; Oliver, Bryan V.; Simpson, Sean; Renk, Timothy J.; Webb, Timothy J.; Ziska, Derek; Bennett, Nichelle; Droemer, Darryl W.; Cignac, Raymond E.; Obregon, Robert J.; Smith, Chase C.; Wilkins, Frank L.; Welch, Dale R.

    2016-08-08

    Summary form only given. The results presented here were obtained with an SMP diode mounted at the front high voltage end of the RITS accelerator. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulses of six 1.3 MV inductively insulated cavities. Our experiments had two objectives: first to measure the contribution of the back-streaming ion currents emitted from the anode target to the diode beam current, and second to try to evaluate the energy of those ions and hence the actual Anode-Cathode (A-K) gap actual voltage. In any very high voltage inductive voltage adder (IVA) utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the anode-cathode (A-K) gap is problematic. The accelerating voltage quoted in the literature is from estimates based on measurements of the anode and cathode currents of the MITL far upstream from the diode and utilizing the para-potential flow theories and inductive corrections. Thus it would be interesting to have another independent measurement to evaluate the A-K voltage. The diode's anode is made of a number of high Z metals in order to produce copious and energetic flash x-rays. The backstreaming currents are a strong fraction of the anode materials and their stage of cleanness and gas adsorption. We have measured the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip for various diode configurations and different techniques of target cleaning treatments, such as heating to very high temperatures with DC and pulsed current, with RF plasma cleaning and with both plasma cleaning and heating. Finally, we have also evaluated the A-K gap voltage by ion filtering techniques.

  9. PENGEMBANGAN PANDUAN PELATIHAN EFIKASI DIRI DALAM HUBUNGAN PERTEMANAN MELALUI STRATEGI EXPERIENTIAL LEARNING BAGI SISWA SMP

    Directory of Open Access Journals (Sweden)

    Layli Novita

    2016-06-01

    Full Text Available Abstract: The research aims to develop self-efficacy training guides in friendship through experiential learning strategies for junior high school students, so that the counselor can use it as a media of social guidance services for the student especially to improve his confidence in the friendship. This training guide is printed teaching materials containing substance, operational measures, and the evaluation. The procedur of this developmental research is adapted from Borg and Galls (1983 which did in 3 step; 1 plannin;(2 developmental product; and (3 try out of the product. Based on the results of data analysis from expert assessment and potential users as well as revisions that are made in accordance with the advice and input to the product, it can be concluded that this training guide meets the good acceptance criteria and effectively proven in improving students self-efficacy in peer friendships. Abstrak: Penelitian ini bertujuan untuk menghasilkan  panduan pelatihan efikasi diri dalam hubungan pertemanan melalui strategi experiential learning bagi siswa SMP, sehingga konselor dapat menggunakannya sebagai media dalam memberikan layanan bimbingan pribadi-sosial kepada siswa khususnya dalam meningkatkan keyakinan diri di dalam hubungan pertemanan. Panduan pelatihan ini adalah bahan ajar berbasis buku cetakan yang berisi materi, langkah kegiatan, serta evaluasi.Prosedur penelitian dan pengembanganpanduan pelatihan efikasi diri dalam hubungan pertemanan ini  mengadaptasi pengembangan Borg and Gall (1983 yang dilakukan dalam 3 tahapan yaitu, (1 perencanaan pengembangan produk, (2 pengembangan produk, dan (3Uji Coba Produk. Berdasarkan hasil analisis data penilaian ahli dan calon pengguna serta revisi-revisi yang dilakukan sesuai dengan saran dan masukan terhadap produk ini, dapat disimpulkan bahwa panduan pelatihan ini memenuhi kriteria keberterimaan yang baik dan terbukti efektif dalam meningkatkan efikasi diri siswa didalam hubungan

  10. PENGEMBANGAN MODEL EVALUASI PROSES PEMBELAJARAN MATEMATIKA DI SMP BERDASARKAN KURIKULUM 2013

    Directory of Open Access Journals (Sweden)

    Sugiyanto Sugiyanto

    2015-06-01

    Abstract This studi aims to develop a model for an evaluation of mathematics learning processes at junior high schools (JHSs based on Curriculum 2013 and evaluate the effectiveness of the model develo-ped. This was a research and development study. The subject of the research was the teachers, principals, and supervisors. The data collecting instruments were questionnaires and observational sheet. The development process was carried out in 4 stages namely: (1 preliminary investigation; (2 planning development, validation; (3 tryout; (4 product finalization. The try out was perform-ed in 3 stages with the increasing number of participants for each stage. The learning process evaluation model was supported by instrument to assess lesson plans, learning implementation, and the implementation of learning outcome assessment. The content validity was assessed through focus group discussion (FGD. The construct validity was assessed by the factor analysis, and the reliabilities were estimated by the Intraclass Correlation Coefficient (ICC. The result of the research was a model of evaluation of mathematics learning processes at junior high schools (JHSs based on Curriculum 2013, consisting of procedures, evaluation guideline and the well de-signed instruments. Based on the try out, all of the instruments have had good suitability, because construct validity and reliability meet all of the academic requirements. According to the evalua-tion from the practitioners and the model users, the model of the evaluation of mathematics learn-ing processes at junior high schools (JHSs based on Curriculum 2013 was very effective to be implemented. Keywords: development model, evaluation of learning processes, SMP mathematics

  11. CT findings of portal vein aneurysm

    International Nuclear Information System (INIS)

    Yang, Dal Mo; Chang, Mi Son; Yoon, Myung Hwan; Kim, Hak Soo; Kim, Hyung Sik; Chung, Hyo Sun; Chung, Jin Woo

    1999-01-01

    To describe the CT findings of portal vein aneurysm in eight patients. All patients included in this study (two men and six women) underwent CT examinations between October 1996 and June1998. Of these eight, three were suffering from hepatic disease and portal hypertension. We determined the location, shape, size, and characteristics of the lesions, and the presence or absence of portal vein anomaly. Seven patients had intrahepatic portal vein aneurysm (at the umbilical portion of the left portal vein in five patients, between the transverse and umbilical portion of the left portal vein in one, and at the bifurcation of the anterior and posterior branch of the right portal vein in one), while extrahepatic portal vein aneurysm, at the confluence of the superior mesenteric and splenic vein was found in only one. Lesions were cyst-shaped in seven cases and saccular in one, and showed well-circumscribed, markedly enhanced mass, which communicated with the portal vein and/or gives off major branches. Portal vein anomaly, in which the right anterior segmental portal vein originated from the umbilical portion of the left portal vein, was seen in three patients. In all three, intrahepatic portal vein aneurysm was present at the umbilical portion of the left portal vein, and in one, the umbilical protion of the left portal vein was located to the right of the Cantlic line. CT examination can help reveal portal vein aneurysm by detecting a well-circumscribed, markedly enhanced mass which communicates with the portal vein and/or gives off major branches

  12. Liquid foam templating - A route to tailor-made polymer foams.

    Science.gov (United States)

    Andrieux, Sébastien; Quell, Aggeliki; Stubenrauch, Cosima; Drenckhan, Wiebke

    2018-06-01

    Solid foams with pore sizes between a few micrometres and a few millimetres are heavily exploited in a wide range of established and emerging applications. While the optimisation of foam applications requires a fine control over their structural properties (pore size distribution, pore opening, foam density, …), the great complexity of most foaming processes still defies a sound scientific understanding and therefore explicit control and prediction of these parameters. We therefore need to improve our understanding of existing processes and also develop new fabrication routes which we understand and which we can exploit to tailor-make new porous materials. One of these new routes is liquid templating in general and liquid foam templating in particular, to which this review article is dedicated. While all solid foams are generated from an initially liquid(-like) state, the particular notion of liquid foam templating implies the specific condition that the liquid foam has time to find its "equilibrium structure" before it is solidified. In other words, the characteristic time scales of the liquid foam's stability and its solidification are well separated, allowing to build on the vast know-how on liquid foams established over the last 20 years. The dispersed phase of the liquid foam determines the final pore size and pore size distribution, while the continuous phase contains the precursors of the desired porous scaffold. We review here the three key challenges which need to be addressed by this approach: (1) the control of the structure of the liquid template, (2) the matching of the time scales between the stability of the liquid template and solidification, and (3) the preservation of the structure of the template throughout the process. Focusing on the field of polymer foams, this review gives an overview of recent research on the properties of liquid foam templates and summarises a key set of studies in the emerging field of liquid foam templating. It

  13. Comparison of sound absorbing performances of copper foam and iron foam with the same parameters

    Science.gov (United States)

    Yang, X. C.; Shen, X. M.; Xu, P. J.; Zhang, X. N.; Bai, P. F.; Peng, K.; Yin, Q.; Wang, D.

    2018-01-01

    Sound absorbing performances of the copper foam and the iron foam with the same parameters were investigated by the AWA6128A detector according to standing wave method. Two modes were investigated, which included the pure metal foam mode and the combination mode with the settled thickness of metal foam. In order to legibly compare the sound absorbing coefficients of the two metal foams, the detected sound frequency points were divided into the low frequency range (100 Hz ~ 1000 Hz), the middle frequency range (1000 Hz ~ 3200 Hz), and the high frequency range (3500 Hz ~ 6000 Hz). Sound absorbing performances of the two metal foams in the two modes were discussed within the three frequency ranges in detail. It would be calculated that the average sound absorbing coefficients of copper foam in the pure metal foam mode were 12.6%, 22.7%, 34.6%, 43.6%, 51.1%, and 56.2% when the thickness was 5 mm, 10 mm, 15 mm, 20 mm, 25 mm, and 30 mm. meanwhile, in the combination mode, the average sound absorbing coefficients of copper foam with the thickness of 10 mm were 30.6%, 34.8%, 36.3%, and 35.8% when the cavity was 5 mm, 10 mm, 15 mm, and 20 mm. In addition, those of iron foam in the pure metal foam mode were 13.4%, 20.1%, 34.4%, 43.1%, 49.6%, and 56.1%, and in the combination mode were 25.6%, 30.5%, 34.3%, and 33.4%.

  14. Applications of Polymer Matrix Syntactic Foams

    Science.gov (United States)

    Gupta, Nikhil; Zeltmann, Steven E.; Shunmugasamy, Vasanth Chakravarthy; Pinisetty, Dinesh

    2013-11-01

    A collection of applications of polymer matrix syntactic foams is presented in this article. Syntactic foams are lightweight porous composites that found their early applications in marine structures due to their naturally buoyant behavior and low moisture absorption. Their light weight has been beneficial in weight sensitive aerospace structures. Syntactic foams have pushed the performance boundaries for composites and have enabled the development of vehicles for traveling to the deepest parts of the ocean and to other planets. The high volume fraction of porosity in syntactic foams also enabled their applications in thermal insulation of pipelines in oil and gas industry. The possibility of tailoring the mechanical and thermal properties of syntactic foams through a combination of material selection, hollow particle volume fraction, and hollow particle wall thickness has helped in rapidly growing these applications. The low coefficient of thermal expansion and dimensional stability at high temperatures are now leading their use in electronic packaging, composite tooling, and thermoforming plug assists. Methods have been developed to tailor the mechanical and thermal properties of syntactic foams independent of each other over a wide range, which is a significant advantage over other traditional particulate and fibrous composites.

  15. Numerical simulation of anisotropic polymeric foams

    Directory of Open Access Journals (Sweden)

    Volnei Tita

    Full Text Available This paper shows in detail the modelling of anisotropic polymeric foam under compression and tension loadings, including discussions on isotropic material models and the entire procedure to calibrate the parameters involved. First, specimens of poly(vinyl chloride (PVC foam were investigated through experimental analyses in order to understand the mechanical behavior of this anisotropic material. Then, isotropic material models available in the commercial software AbaqusTM were investigated in order to verify their ability to model anisotropic foams and how the parameters involved can influence the results. Due to anisotropy, it is possible to obtain different values for the same parameter in the calibration process. The obtained set of parameters are used to calibrate the model according to the application of the structure. The models investigated showed minor and major limitations to simulate the mechanical behavior of anisotropic PVC foams under compression, tension and multi-axial loadings. Results show that the calibration process and the choice of the material model applied to the polymeric foam can provide good quantitative results and save project time. Results also indicate what kind and order of error one will get if certain choices are made throughout the modelling process. Finally, even though the developed calibration procedure is applied to specific PVC foam, it still outlines a very broad drill to analyze other anisotropic cellular materials.

  16. Foam film permeability: theory and experiment.

    Science.gov (United States)

    Farajzadeh, R; Krastev, R; Zitha, Pacelli L J

    2008-02-28

    The mass transfer of gas through foam films is a prototype of various industrial and biological processes. The aim of this paper is to give a perspective and critical overview of studies carried out to date on the mass transfer of gas through foam films. Contemporary experimental data are summarized, and a comprehensive overview of the theoretical models used to explain the observed effects is given. A detailed description of the processes that occur when a gas molecule passes through each layer that forms a foam film is shown. The permeability of the film-building surfactant monolayers plays an important role for the whole permeability process. It can be successfully described by the models used to explain the permeability of surfactant monolayers on aqueous sub-phase. For this reason, the present paper briefly discusses the surfactant-induced resistance to mass transfer of gases through gas-liquid interface. One part of the paper discusses the experimental and theoretical aspects of the foam film permeability in a train of foam films in a matrix or a cylinder. This special case is important to explain the gas transfer in porous media or in foams. Finally, this paper will highlight the gaps and challenges and sketch possible directions for future research.

  17. Shrinkage deformation of cement foam concrete

    Science.gov (United States)

    Kudyakov, A. I.; Steshenko, A. B.

    2015-01-01

    The article presents the results of research of dispersion-reinforced cement foam concrete with chrysotile asbestos fibers. The goal was to study the patterns of influence of chrysotile asbestos fibers on drying shrinkage deformation of cement foam concrete of natural hardening. The chrysotile asbestos fiber contains cylindrical fiber shaped particles with a diameter of 0.55 micron to 8 microns, which are composed of nanostructures of the same form with diameters up to 55 nm and length up to 22 microns. Taking into account the wall thickness, effective reinforcement can be achieved only by microtube foam materials, the so- called carbon nanotubes, the dimensions of which are of power less that the wall pore diameter. The presence of not reinforced foam concrete pores with perforated walls causes a decrease in its strength, decreases the mechanical properties of the investigated material and increases its shrinkage. The microstructure investigation results have shown that introduction of chrysotile asbestos fibers in an amount of 2 % by weight of cement provides the finely porous foam concrete structure with more uniform size closed pores, which are uniformly distributed over the volume. This reduces the shrinkage deformation of foam concrete by 50%.

  18. Auxetic Polyurethane Foam (Fabrication, Properties and Applications)

    International Nuclear Information System (INIS)

    Yousif, H.I.Y.

    2012-01-01

    Modern technology requires new materials of special properties. For the last two decades there has been a great interest in a class of materials known as auxetic materials. An auxetic material is a material that has a negative Poisson's ratio which means that this material expands laterally when they subjected to a tensile force unlike most of the other traditional materials. This material has superior properties over the traditional material such as high shear modulus and high impact resistance, which makes this material a good candidate for many engineering applications. In the present research work, auxetic flexible polyurethane polymeric foams having different densities were fabricated from conventional flexible polyurethane polymeric foam at different compression ratios. The microstructure of conventional and processed foams was examined by optical microscope to compare between the two structures. The microstructure of processed foam was compared with the one presented in the literature and it has shown the auxetic structure configuration. This is the first time to produce auxetic foam in Egypt. Conventional and auxetic foam samples having cylindrical and square cross-sections were produced from foams having different densities (25 kg/m 3 and 30 kg/m 3 ). The compression ratios used to produce the auxetic samples are (5.56, 6.94 and 9.26). Four mechanical tests were carried out to get the mechanical properties for both conventional and auxetic foams. Two quasi-static mechanical tests t ension and compression a nd two dynamic mechanical tests H ysteresis and resilience w ere carried out to compare between the conventional and auxetic foams. The quasi-static tensile test was carried out at speed was adjusted to be position control rate of 0.2 mm/s. The compression and hysteresis tests were carried out at strain control rate of 0.3 S -1 . The data recorded from the machine were stress and strain. The modulus of elasticity and Poisson's ratio of the test

  19. An anatomic risk model to screen post endovascular aneurysm repair patients for aneurysm sac enlargement.

    Science.gov (United States)

    Png, Chien Yi M; Tadros, Rami O; Beckerman, William E; Han, Daniel K; Tardiff, Melissa L; Torres, Marielle R; Marin, Michael L; Faries, Peter L

    2017-09-01

    Follow-up computed tomography angiography (CTA) scans add considerable postimplantation costs to endovascular aneurysm repairs (EVARs) of abdominal aortic aneurysms (AAAs). By building a risk model, we hope to identify patients at low risk for aneurysm sac enlargement to minimize unnecessary CTAs. 895 consecutive patients who underwent EVAR for AAA were reviewed, of which 556 met inclusion criteria. A Probit model was created for aneurysm sac enlargement, with preoperative aneurysm morphology, patient demographics, and operative details as variables. Our final model included 287 patients and had a sensitivity of 100%, a specificity of 68.9%, and an accuracy of 70.4%. Ninety-nine (35%) of patients were assigned to the high-risk group, whereas 188 (65%) of patients were assigned to the low-risk group. Notably, regarding anatomic variables, our model reported that age, pulmonary comorbidities, aortic neck diameter, iliac artery length, and aneurysms were independent predictors of post-EVAR sac enlargement. With the exception of age, all statistically significant variables were qualitatively supported by prior literature. With regards to secondary outcomes, the high-risk group had significantly higher proportions of AAA-related deaths (5.1% versus 1.1%, P = 0.037) and Type 1 endoleaks (9.1% versus 3.2%, P = 0.033). Our model is a decent predictor of patients at low risk for post AAA EVAR aneurysm sac enlargement and associated complications. With additional validation and refinement, it could be applied to practices to cut down on the overall need for postimplantation CTA. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Evaluation of Aneurysm Neck Angle Change After Endovascular Aneurysm Repair Clinical Investigations

    Energy Technology Data Exchange (ETDEWEB)

    Le, Trong Binh; Moon, Mi Hyoung [Inha University Hospital, Endovascular Training Center (Korea, Republic of); Jeon, Yong Sun, E-mail: radjeon@inha.ac.kr [Inha University Hospital, Inha University School of Medicine, Department of Radiology (Korea, Republic of); Hong, Kee Chun [Inha University School of Medicine, Department of Vascular Surgery (Korea, Republic of); Cho, Soon Gu [Inha University Hospital, Inha University School of Medicine, Department of Radiology (Korea, Republic of); Park, Keun-Myoung [Inha University School of Medicine, Department of Vascular Surgery (Korea, Republic of)

    2016-05-15

    PurposeTo evaluate the aneurysm neck angle changes and post-endovascular aneurysm repair (EVAR) complications.MethodsWe retrospectively analyzed 72 cases of elective EVAR for abdominal aortic aneurysm among 109 consecutive cases from December 2005 to April 2014. Patients were divided into angulated and non-angulated groups. The angulated group was defined as neck angulation ≥60°. Neck angle was evaluated pre- and post-EVAR during short- (within 1 month), mid- (3–6 months), and long-term (>1 year) follow-up. Aneurysm sac diameter change, aneurysm neck morphology other than angulation, endoleaks, and other post-procedural complications were also documented.ResultsA total of 34 patients were enrolled in the angulated group. There were no statistical differences in age, sex, follow-up duration, and aneurysm neck profile between the two groups (p > 0.05). Both groups showed statistically significant and consistent decreases in angulation during the follow-up period (p < 0.01). The angulated group revealed 22.45 % more straightening than the non-angulated group. Recoil of the Endurant device occurred in the angulated group. No statistically significant intergroup differences were observed in any endoleaks, complications, or re-intervention rates (p > 0.05). Pre-EVAR angle was the only predictor for post-procedural angle change (p < 0.001).ConclusionEVAR is applicable for patients with highly angulated aneurysm neck and provides consistent neck straightening over long-term follow-up. Recoil was evident in the angulated group using the Endurant device.

  1. Endovascular treatment of the posterior inferior cerebellar artery aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Bradac, G.B.; Bergui, M. [Neuroradiology, Univ. di Torino, Turin (Italy)

    2004-12-01

    Aneurysms may arise at various locations along the course of the posterior inferior cerebellar artery. Brainstem and cranial nerves manipulation make the surgical approach to proximal aneurysms difficult, while the occlusion of the parent vessel is sometimes unavoidable in peripheral aneurysms. Endovascular treatment can be a good alternative, but also with this approach the location of the aneurysm is critical. If occlusion of the parent vessel is planned, anatomical variations and vascular territories of the brainstem should be considered. We report our experience with 18 consecutive aneurysms (12 proximal, 6 peripheral) treated by coils. Complete occlusion was achieved in 14 patients and subtotal in 4. In three patients the parent vessel had to be sacrificed. During treatment two perforations occurred; aneurysms were completely occluded without clinical consequences. Two small asymptomatic cerebellar infarctions were seen on postoperative computed tomography. Clinical outcome was good in 16 patients. (orig.)

  2. The value of MDCT in diagnosis of splenic artery aneurysms

    International Nuclear Information System (INIS)

    Sun Cong; Liu Cheng; Wang Ximing; Wang Daoping

    2008-01-01

    Objective: To evaluate the clinical value of multiple detector computed tomography (MDCT) in the diagnosis and planning the treatment of splenic aneurysms. Methods: Eight cases with splenic artery aneurysms (SAA) were retrospectively reviewed. Sixty four-slice spiral CT scans were performed. Intravenous contrast material was injected at 4 ml/s, and arterial and venous phase images were obtained. Subsequently, arterial phase images were analyzed and made for CT angiography. The diagnosis was made by using axial and reconstructive images. All of the patients were also performed Doppler color echocardiography. Results: All patients showed splenic artery and splenic artery aneurysms clearly with CT arterial phase images. Among them, six patients had splenic artery aneurysms, one had giant splenic artery aneurysms (GSAA) and one had splenic artery pseudoaneurysms. Ultrasound examination only diagnosed six of them. Conclusion: MDCT is a noninvasive and valuable method in diagnosis of splenic artery aneurysms and has high value in determination of treatment plan

  3. The value of MDCT in diagnosis of splenic artery aneurysms

    Energy Technology Data Exchange (ETDEWEB)

    Sun Cong [Shandong University, Shandong Provincial Medical Imaging Institute, Road jing-wu No. 324, Jinan, Shandong 250021 (China)], E-mail: suncong03@163.com; Liu Cheng; Wang Ximing; Wang Daoping [Shandong University, Shandong Provincial Medical Imaging Institute, Road jing-wu No. 324, Jinan, Shandong 250021 (China)

    2008-03-15

    Objective: To evaluate the clinical value of multiple detector computed tomography (MDCT) in the diagnosis and planning the treatment of splenic aneurysms. Methods: Eight cases with splenic artery aneurysms (SAA) were retrospectively reviewed. Sixty four-slice spiral CT scans were performed. Intravenous contrast material was injected at 4 ml/s, and arterial and venous phase images were obtained. Subsequently, arterial phase images were analyzed and made for CT angiography. The diagnosis was made by using axial and reconstructive images. All of the patients were also performed Doppler color echocardiography. Results: All patients showed splenic artery and splenic artery aneurysms clearly with CT arterial phase images. Among them, six patients had splenic artery aneurysms, one had giant splenic artery aneurysms (GSAA) and one had splenic artery pseudoaneurysms. Ultrasound examination only diagnosed six of them. Conclusion: MDCT is a noninvasive and valuable method in diagnosis of splenic artery aneurysms and has high value in determination of treatment plan.

  4. Vitamins and abdominal aortic aneurysm.

    Science.gov (United States)

    Takagi, Hisato; Umemoto, Takuya

    2017-02-01

    To summarize the association of vitamins (B6, B12, C, D, and E) and abdominal aortic aneurysm (AAA), we reviewed clinical studies with a comprehensive literature research and meta-analytic estimates. To identify all clinical studies evaluating the association of vitamins B6/B12/C/D/E and AAA, databases including MEDLINE, EMBASE, and the Cochrane Central Register of Controlled Trials were searched through April 2015, using Web-based search engines (PubMed and OVID). For each case-control study, data regarding vitamin levels in both the AAA and control groups were used to generate standardized mean differences (SMDs) and 95% confidence intervals (CIs). Pooled analyses of the 4 case-control studies demonstrated significantly lower circulating vitamin B6 levels (SMD, -0.33; 95% CI, -0.55 to -0.11; P=0.003) but non-significantly lower vitamin B12 levels (SMD, -0.42; 95% CI, -1.09 to 0.25; P=0.22) in patients with AAA than subjects without AAA. Pooled analyses of the 2 case-control studies demonstrated significantly lower levels of circulating vitamins C (SMD, -0.71; 95% CI, -1.23 to -0.19; P=0.007) and E (SMD, -1.76; 95% CI, -2.93 to 0.60; P=0.003) in patients with AAA than subjects without AAA. Another pooled analysis of the 3 case-control studies demonstrated significantly lower circulating vitamin D (25-hydroxyvitamin D) levels (SMD, -0.25; 95% CI, -0.50 to -0.01; P=0.04) in patients with AAA than subjects without AAA. In a double-blind controlled trial, 4.0-year treatment with a high-dose folic acid and vitamin B6/B12 multivitamin in kidney transplant recipients did not reduce a rate of AAA repair despite significant reduction in homocysteine level. In another randomized, double-blind, placebo-controlled trial, 5.8-year supplementation with α-tocopherol (vitamin E) had no preventive effect on large AAA among male smokers. In clinical setting, although low circulating vitamins B6/C/D/E (not B12) levels are associated with AAA presence, vitamins B6/B12/E

  5. Foam application from a closed system – a study of machine and foam parameters

    NARCIS (Netherlands)

    Lemmen, Jacques T.E.; Groot Wassink, Jan

    1990-01-01

    An attempt has been made to gain a greater insight into the interaction between foam and a moving textile substrate. The effects of changing wet pick–up, fabric velocity, liquid viscosity, foam density and mode of application on penetration have been studied. Application from a closed system makes

  6. TPX foams for inertial fusion laser experiments: foam preparation, machining, characterization, and discussion of density issues

    International Nuclear Information System (INIS)

    Grosse, M.; Guillot, L.; Reneaume, B.; Fleury, E.; Hermerel, C.; Choux, A.; Jeannot, L.; Geoffray, I.; Faivre, A.; Breton, O.; Andre, J.; Collier, R.; Legaie, O.

    2011-01-01

    Low density foams (in this work, foam density refers to apparent density) are materials of interest for fusion experiments. Low density poly(4-methyl-1-pentene)(commercial name TPX) foams have been produced for 30 years. TPX foams have been shown to have densities as low as 3 mg.cm -3 , which is very close to air density (1.2 mg.cm -3 ). Around this density foams are very light and highly fragile. Their fabrication is thus a real technological challenge. However, shrinking always appears in ranges ranking from 25% to almost 200%. As a result, the apparent density of the final foam never matches the expected value given by the precursor solution concentration. Besides, even if the mold dimensions are precisely known, shrinkage is never linear, and foams have to be machined for precise density measurement. In our work we present a fabrication process for TPX foams and discuss machining and density measuring issues. Particularly, we have found that there are volume and weight limits for a determination of density within the range of 3% uncertainty. This raises the question whether density should rather be determined directly on millimeter-sized targets or should be performed on a bigger scale sample prepared from the same batch. (authors)

  7. From Foam Rubber to Volcanoes: The Physical Chemistry of Foam Formation

    Science.gov (United States)

    Hansen, Lee D.; McCarlie, V. Wallace

    2004-01-01

    The process of foam formation is used for demonstrating the way in which the application of physiochemical principles and knowledge of the physical properties of the materials contributes towards the understanding of a wide range of phenomenon. Solubility of gas and bubble growth should be considered during the development of foamed polymer…

  8. Polymer foam comprising a polymer and nanoparticles, and nanoparticles for the manufacture of such foam.

    NARCIS (Netherlands)

    Vancso, Gyula J.; Duvigneau, Joost; Nederkoorn, P.H.J.; Wassing, T.

    2014-01-01

    A polymer foam is produced comprising a polymer and nanoparticles having a maximum dimensionof 750 nm, which foam has cells with an average cell size of at most 1 µm and a cell density of at least 1012 cells/ml, wherein polymeric grafts have been attached to the nanoparticles. The nanoparticles may

  9. Reduction of SR Ca2+ leak and arrhythmogenic cellular correlates by SMP-114, a novel CaMKII inhibitor with oral bioavailability.

    Science.gov (United States)

    Neef, Stefan; Mann, Christian; Zwenger, Anne; Dybkova, Nataliya; Maier, Lars S

    2017-07-01

    Sarcoplasmic reticulum (SR) Ca 2+ leak induced by Ca 2+ /calmodulin-dependent protein kinase II (CaMKII) is centrally involved in atrial and ventricular arrhythmogenesis as well as heart failure remodeling. Consequently, treating SR Ca 2+ leak has been proposed as a novel therapeutic paradigm, but compounds for use in humans are lacking. SMP-114 ("Rimacalib") is a novel, orally available CaMKII inhibitor developed for human use that has already entered clinical phase II trials to treat rheumatoid arthritis. We speculated that SMP-114 might also be useful to treat cardiac SR Ca 2+ leak. SMP-114 significantly reduces SR Ca 2+ leak (as assessed by Ca 2+ sparks) in human atrial (0.72 ± 0.33 sparks/100 µm/s vs. control 3.02 ± 0.91 sparks/100 µm/s) and failing left ventricular (0.78 ± 0.23 vs. 1.69 ± 0.27 sparks/100 µm/s) as well as in murine ventricular cardiomyocytes (0.30 ± 0.07 vs. 1.50 ± 0.28 sparks/100 µm/s). Associated with lower SR Ca 2+ leak, we found that SMP-114 suppressed the occurrence of spontaneous arrhythmogenic spontaneous Ca 2+ release (0.356 ± 0.109 vs. 0.927 ± 0.216 events per 30 s stimulation cessation). In consequence, post-rest potentiation of Ca 2+ -transient amplitude (measured using Fura-2) during the 30 s pause was improved by SMP-114 (52 ± 5 vs. 37 ± 4%). Noteworthy, SMP-114 has these beneficial effects without negatively impairing global excitation-contraction coupling: neither systolic Ca 2+ release nor single cell contractility was compromised, and also SR Ca 2+ reuptake, in line with resulting cardiomyocyte relaxation, was not impaired by SMP-114 in our assays. SMP-114 demonstrated potential to treat SR Ca 2+ leak and consequently proarrhythmogenic events in rodent as well as in human atrial cardiomyocytes and cardiomyocytes from patients with heart failure. Further research is necessary towards clinical use in cardiac disease.

  10. New Approaches to Aluminum Integral Foam Production with Casting Methods

    Directory of Open Access Journals (Sweden)

    Ahmet Güner

    2015-08-01

    Full Text Available Integral foam has been used in the production of polymer materials for a long time. Metal integral foam casting systems are obtained by transferring and adapting polymer injection technology. Metal integral foam produced by casting has a solid skin at the surface and a foam core. Producing near-net shape reduces production expenses. Insurance companies nowadays want the automotive industry to use metallic foam parts because of their higher impact energy absorption properties. In this paper, manufacturing processes of aluminum integral foam with casting methods will be discussed.

  11. Surgical management of an ACM aneurysm eight years after coiling.

    Science.gov (United States)

    Pogády, P; Fellner, F; Trenkler, J; Wurm, G

    2007-04-01

    The authors present a case report on rebleeding of a medial cerebral aneurysm (MCA) eight years after complete endovascular coiling. The primarily successfully coiled MCA aneurysm showed a local regrowth which, however, was not the source of the rebleeding. The angiogram demonstrated no evidence of contrast filling of the coiled segment, but according to intraoperative findings (haematoma location, displacement of coils, evident place of rupture) there is no doubt that the coiled segment of the aneurysm was responsible for the haemorrhage.

  12. Aneurysmal malformation of the extrahepatic portal vein: a case report

    International Nuclear Information System (INIS)

    Lee, Jeong Min; Kang, Sung Soo; Kim, Chong Soo; Han, Hyeun Young

    1999-01-01

    Aneurysmal malformation of the portal vein is a rare entity. To our knowledge, only scattered reports of portal vein aneurysms appear in the literature in English, and there is no previously published report in Korean. We describe a case exhibiting aneurysmal malformation of the extrahepatic portal vein at the hepatic hilum ; the findings demonstrated by ultrasound, CT and angiography are discussed, a review of previously described cases is included

  13. Diagnosis of mycotic abdominal aortic aneurysm using 67-gallium citrate

    International Nuclear Information System (INIS)

    Blumoff, R.L.; McCartney, W.; Jaques, P.; Johnson, G. Jr.

    1982-01-01

    Mycotic aneurysms of the abdominal aorta are uncommon, but potentially lethal problems. Clinical subtleties may suggest their presence, but in the past, definitive diagnosis has been dependent on surgical exploration or autopsy findings. A case is presented in which 67-gallium citrate abdominal scanning localized the site of sepsis in an abdominal aortic aneurysm and allowed for prompt and successful surgical therapy. This noninvasive technique is recommended as a adjunct in the diagnosis of mycotic abdominal aortic aneurysms

  14. Early Enlargement of Aneurysmal Sac and Separation of EndoBags of Nellix Endovascular Aneurysm Sealing System as Signs of Increased Risk of Later Aneurysm Rupture

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Lik Fai, E-mail: rickieclf@yahoo.com.hk [Princess Margaret Hospital, Department of Radiology (China); Cheung, Kwok Fai; Chan, Kwong Man [Princess Margaret Hospital, Department of Surgery (China); Ma, Johnny Ka Fai; Luk, Wing Hang [Princess Margaret Hospital, Department of Radiology (China); Chan, Micah Chi King [Princess Margaret Hospital, Department of Surgery (China); Ng, Carol Wing Kei; Mahboobani, Neeraj Ramesh [Princess Margaret Hospital, Department of Radiology (China); Ng, Wai Kin [Princess Margaret Hospital, Department of Surgery (China); Wong, Ting [Princess Margaret Hospital, Department of Radiology (China)

    2016-11-15

    Nellix Endovascular Aneurysm Sealing (EVAS) system is a new concept and technology of abdominal aortic aneurysm (AAA) repair. Elective EVAS using Nellix device was performed for a 83-year-old man with AAA. 2-month post-EVAS CTA surveillance demonstrated mild enlargement of aneurysmal sac and separation of the EndoBags, but without detectable endoleak. The patient developed sudden AAA rupture with retroperitoneal hematoma at about 4 months after EVAS. We postulated that early enlargement of aneurysmal sac and separation of EndoBags of Nellix devices after EVAS, even without detectable endoleak, might indicate significant aneurysmal wall weakening with increased risk of later AAA rupture. To the best of the authors’ knowledge, this was the first reported case of aortic rupture after EVAS without detectable endoleak during and after the procedure.

  15. Early Enlargement of Aneurysmal Sac and Separation of EndoBags of Nellix Endovascular Aneurysm Sealing System as Signs of Increased Risk of Later Aneurysm Rupture

    International Nuclear Information System (INIS)

    Cheng, Lik Fai; Cheung, Kwok Fai; Chan, Kwong Man; Ma, Johnny Ka Fai; Luk, Wing Hang; Chan, Micah Chi King; Ng, Carol Wing Kei; Mahboobani, Neeraj Ramesh; Ng, Wai Kin; Wong, Ting

    2016-01-01

    Nellix Endovascular Aneurysm Sealing (EVAS) system is a new concept and technology of abdominal aortic aneurysm (AAA) repair. Elective EVAS using Nellix device was performed for a 83-year-old man with AAA. 2-month post-EVAS CTA surveillance demonstrated mild enlargement of aneurysmal sac and separation of the EndoBags, but without detectable endoleak. The patient developed sudden AAA rupture with retroperitoneal hematoma at about 4 months after EVAS. We postulated that early enlargement of aneurysmal sac and separation of EndoBags of Nellix devices after EVAS, even without detectable endoleak, might indicate significant aneurysmal wall weakening with increased risk of later AAA rupture. To the best of the authors’ knowledge, this was the first reported case of aortic rupture after EVAS without detectable endoleak during and after the procedure.

  16. Foaming in manure based digesters: Effect of overloading and foam suppression using antifoam agents

    DEFF Research Database (Denmark)

    Kougias, Panagiotis; Tsapekos, Panagiotis; Boe, Kanokwan

    Anaerobic digestion foaming is one of the major problems that occasionally occur in full-scale biogas plants, affecting negatively the overall digestion process. The foam is typically created either in the main biogas reactor or/and in the pre-storage tank and the entrapped solids in the foam cause...... severe operational problems, such as blockage of mixing devices and collapse of pumps. Furthermore, the foaming problem is linked with economic consequences for biogas plants, due to income losses derived from the reduced biogas production, extra labour work and additional maintenance costs. Moreover....... A continuous stirred tank reactor, operating under thermophilic conditions (55 oC) was fed with cattle manure. In order to investigate the effect of organic overloading on foam formation, a stepwise increase of the organic loading rate was performed by the addition of glucose in the feeding substrate. Biogas...

  17. Graphite Foam Heat Exchangers for Thermal Management

    Energy Technology Data Exchange (ETDEWEB)

    Klett, J.W.

    2004-06-07

    Improved thermal management is needed to increase the power density of electronic and more effectively cool electronic enclosures that are envisioned in future aircraft, spacecraft and surface ships. Typically, heat exchanger cores must increase in size to more effectively dissipate increased heat loads, this would be impossible in many cases, thus improved heat exchanger cores will be required. In this Phase I investigation, MRi aimed to demonstrate improved thermal management using graphite foam (Gr-foam) core heat exchangers. The proposed design was to combine Gr-foams from POCO with MRi's innovative low temperature, active metal joining process (S-Bond{trademark}) to bond Gr-foam to aluminum, copper and aluminum/SiC composite faceplates. The results were very favorable, so a Phase II SBIR with the MDA was initiated. This had primarily 5 tasks: (1) bonding, (2) thermal modeling, (3) cooling chip scale packages, (4) evaporative cooling techniques and (5) IGBT cold plate development. The bonding tests showed that the ''reflow'' technique with S-Bond{reg_sign}-220 resulted in the best and most consistent bond. Then, thermal modeling was used to design different chip scale packages and IGBT cold plates. These designs were used to fabricate many finned graphite foam heat sinks specifically for two standard type IC packages, the 423 and 478 pin chips. These results demonstrated several advantages with the foam. First, the heat sinks with the foam were lighter than the copper/aluminum sinks used as standards. The sinks for the 423 design made from foam were not as good as the standard sinks. However, the sinks made from foam for the 478 pin chips were better than the standard heat sinks used today. However, this improvement was marginal (in the 10-20% better regime). However, another important note was that the epoxy bonding technique resulted in heat sinks with similar results as that with the S-bond{reg_sign}, slightly worse than the S

  18. Aneurysmal subarachnoid hemorrhage with concomitant posterior communicating artery fenestration.

    Science.gov (United States)

    Weiner, Gregory M; Grandhi, Ramesh; Zwagerman, Nathan T; Agarwal, Nitin; Friedlander, Robert M

    2015-02-01

    Fenestrations of the posterior communicating artery (PCoA) are extremely rare. Associated aneurysms have only been documented three times in the literature, and none associated with a subarachnoid hemorrhage. We describe a 52-year-old female who presented with a subarachnoid hemorrhage secondary to a ruptured saccular aneurysm at the proximal limb of a fenestrated right PCoA. The patient was also found to have bilateral middle cerebral artery (MCA) aneurysms. Surgical management included surmising the etiology of the subarachnoid hemorrhage with subsequent clipping of both the right PCoA and MCA aneurysm. The potential embryological mechanisms leading to a PCoA fenestration are discussed.

  19. Coil embolization of mycotic pulmonary artery aneurysm: a case report

    International Nuclear Information System (INIS)

    Kim, Jeen Woo; Lee, Jae Kyo; Hwang, Mi Soo; Cho, Kil Ho

    2000-01-01

    Aneurysms of the pulmonary artery are rare, with mycotic aneurysms occurring most frequently. This latter type may also occur in association with a lung abscess or septicemia, particularly in drug addicts. As far as we are aware, the radiologic findings of mycotic aneurysm of the pulmanary artery have not been reported in Korea. We present the simple chest radiographs, as well as the CT and angiographic findings, of a case of aneurysm of the pulmonary artery which was successfully embolized using a coil. (author)

  20. True aneurysm of the proximal occipital artery: Case report.

    Science.gov (United States)

    Illuminati, Giulio; Cannistrà, Marco; Pizzardi, Giulia; Pasqua, Rocco; Frezzotti, Francesca; Calio', Francesco G

    2018-01-01

    True aneurysms of the proximal occipital artery are rare, may cause neurological symptoms due to compression of the hypoglossal nerve and their resection may be technically demanding. The case of an aneurysm of the proximal occipital artery causing discomfort and tongue deviation by compression on the hypoglossal nerve is reported. Postoperative course after resection was followed by complete regression of symptoms. Surgical resection, as standard treatment of aneurysms of the occipital artery, with the eventual technical adjunct of intubation by the nose is effective in durably relieving symptoms and preventing aneurysm-related complication. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.