Condition monitoring of machinery using motor current signature analysis

International Nuclear Information System (INIS)

Kryter, R.C.; Haynes, H.D.

1989-01-01

Motor current signature analysis (MCSA) is a powerful monitoring tool for motor-driven equipment that provides a nonintrusive means for detecting the presence of mechanical and electrical abnormalities in the motor and the driven equipment, including altered conditions in the process ''downstream'' of the motor-driven equipment. It was developed at the Oak Ridge National Laboratory as a means for determining the effects of aging and service wear systems, but it is applicable to a broad range of machinery. MCSA is based on the recognition that an electric motor (ac or dc) driving a mechanical load acts as an efficient and permanently available transducer by sensing mechanical load variations, large and small, long-term and rapid, and converting them into variations in the induced current generated in the motor windings. These motor current variations are carried by the electrical cables processes as desired. Motor current signatures, obtained in both time and over time to provide early indication of degradation. Successful applications of MCSA technology (patent applied for) include not only motor-operated valves but also pumps of various designs, blowers, and air conditioning systems. Examples are presented briefly, and speculation regarding the applicability of MCSA to a broader range of equipment monitoring and production line testing is also given. 1 ref., 13 figs

Smart wearable systems: current status and future challenges.

Science.gov (United States)

Chan, Marie; Estève, Daniel; Fourniols, Jean-Yves; Escriba, Christophe; Campo, Eric

2012-11-01

Extensive efforts have been made in both academia and industry in the research and development of smart wearable systems (SWS) for health monitoring (HM). Primarily influenced by skyrocketing healthcare costs and supported by recent technological advances in micro- and nanotechnologies, miniaturisation of sensors, and smart fabrics, the continuous advances in SWS will progressively change the landscape of healthcare by allowing individual management and continuous monitoring of a patient's health status. Consisting of various components and devices, ranging from sensors and actuators to multimedia devices, these systems support complex healthcare applications and enable low-cost wearable, non-invasive alternatives for continuous 24-h monitoring of health, activity, mobility, and mental status, both indoors and outdoors. Our objective has been to examine the current research in wearable to serve as references for researchers and provide perspectives for future research. Herein, we review the current research and development of and the challenges facing SWS for HM, focusing on multi-parameter physiological sensor systems and activity and mobility measurement system designs that reliably measure mobility or vital signs and integrate real-time decision support processing for disease prevention, symptom detection, and diagnosis. For this literature review, we have chosen specific selection criteria to include papers in which wearable systems or devices are covered. We describe the state of the art in SWS and provide a survey of recent implementations of wearable health-care systems. We describe current issues, challenges, and prospects of SWS. We conclude by identifying the future challenges facing SWS for HM. Copyright © 2012 Elsevier B.V. All rights reserved.

Imaging standards for smart cards

Science.gov (United States)

Ellson, Richard N.; Ray, Lawrence A.

1996-02-01

"Smart cards" are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper will review imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper will conclude with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.

Optimum Frequency for Eddy Current Testing Method of SMART SG tubes

International Nuclear Information System (INIS)

Lee, Yoon Sang; Jung, Hyun Kyu; Choung, Yun Hang

2009-01-01

The SMART SG tubes will be made of Alloy 690. The outside diameter will be 17 mm and the thickness will be 2.5 mm. They will be assembled helically around, and their innermost diameter will be about 600 mm and the total length will be about 32 meters. For safety, SMART SG tubes are designed for use with thick tubes such as 2.5 mm thickness compared to about 1 mm thickness of normal Korean standard pressurized water reactor tubes. Due to using thick tubes such as 2.5 mm varieties, it was doubted that the Eddy Current Testing Method (ECT) would be a feasible method. Therefore we are trying to simulate the bobbin probe signal for SMART SG tubes and comparing it to PWR SG ECT probe signal using VIM software, checking for the applicability of ECT. Also we are trying to compare the ECT signal of 2.5 mm thick stainless tubes to check if they are possible substitute material

Machine monitoring via current signature analysis techniques

International Nuclear Information System (INIS)

Smith, S.F.; Castleberry, K.N.; Nowlin, C.H.

1992-01-01

A significant need in the effort to provide increased production quality is to provide improved plant equipment monitoring capabilities. Unfortunately, in today's tight economy, even such monitoring instrumentation must be implemented in a recognizably cost effective manner. By analyzing the electric current drawn by motors, actuator, and other line-powered industrial equipment, significant insights into the operations of the movers, driven equipment, and even the power source can be obtained. The generic term 'current signature analysis' (CSA) has been coined to describe several techniques for extracting useful equipment or process monitoring information from the electrical power feed system. A patented method developed at Oak Ridge National Laboratory is described which recognizes the presence of line-current modulation produced by motors and actuators driving varying loads. The in-situ application of applicable linear demodulation techniques to the analysis of numerous motor-driven systems is also discussed. The use of high-quality amplitude and angle-demodulation circuitry has permitted remote status monitoring of several types of medium and high-power gas compressors in (US DOE facilities) driven by 3-phase induction motors rated from 100 to 3,500 hp, both with and without intervening speed increasers. Flow characteristics of the compressors, including various forms of abnormal behavior such as surging and rotating stall, produce at the output of the specialized detectors specific time and frequency signatures which can be easily identified for monitoring, control, and fault-prevention purposes. The resultant data are similar in form to information obtained via standard vibration-sensing techniques and can be analyzed using essentially identical methods. In addition, other machinery such as refrigeration compressors, brine pumps, vacuum pumps, fans, and electric motors have been characterized

Smart grids in the colombian electric system: Current situation and potential opportunities

Directory of Open Access Journals (Sweden)

William Mauricio Giral Ramírez

2017-07-01

Full Text Available Context: This paper focuses on providing a functional analysis of smart grids, with the purpose of establishing a framework to identify the main characteristics of the current electric interconnection system in Colombia. It also names the positive incentives proposed by the Colombian government to support both research and development projects that implement non-conventional energy sources and promoting energy management based on efficiency. Method: An architecture model that describes the components interoperability of a smart grid is presented using a descriptive methodology. Results: The results include a list of the objectives established by the Colombian public and private entities related to energy development, specially focusing on the opportunities to provide some kind of artificial intelligence to the current electrical system. Conclusions: It is necessary for the Colombian energy system to supply the energy demand considering electrical safety, social equity, and the minimum environmental impact. These restrictions impose new challenges for the energy system itself: From a technical point of view, the traditional electrical grid must be outfitted with the characteristics of a smart grid, and from a legal perspective, it is essential to generate a clear regulatory framework that promotes the development of this type of technology.

Current Capabilities at SNL for the Integration of Small Modular Reactors onto Smart Microgrids Using Sandia's Smart Microgrid Technology High Performance Computing and Advanced Manufacturing.

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, Salvador B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

Smart grids are a crucial component for enabling the nation’s future energy needs, as part of a modernization effort led by the Department of Energy. Smart grids and smart microgrids are being considered in niche applications, and as part of a comprehensive energy strategy to help manage the nation’s growing energy demands, for critical infrastructures, military installations, small rural communities, and large populations with limited water supplies. As part of a far-reaching strategic initiative, Sandia National Laboratories (SNL) presents herein a unique, three-pronged approach to integrate small modular reactors (SMRs) into microgrids, with the goal of providing economically-competitive, reliable, and secure energy to meet the nation’s needs. SNL’s triad methodology involves an innovative blend of smart microgrid technology, high performance computing (HPC), and advanced manufacturing (AM). In this report, Sandia’s current capabilities in those areas are summarized, as well as paths forward that will enable DOE to achieve its energy goals. In the area of smart grid/microgrid technology, Sandia’s current computational capabilities can model the entire grid, including temporal aspects and cyber security issues. Our tools include system development, integration, testing and evaluation, monitoring, and sustainment.

A security and privacy preserving e-prescription system based on smart cards.

Science.gov (United States)

Hsu, Chien-Lung; Lu, Chung-Fu

2012-12-01

In 2002, Ateniese and Medeiros proposed an e-prescription system, in which the patient can store e-prescription and related information using smart card. Latter, Yang et al. proposed a novel smart-card based e-prescription system based on Ateniese and Medeiros's system in 2004. Yang et al. considered the privacy issues of prescription data and adopted the concept of a group signature to provide patient's privacy protection. To make the e-prescription system more realistic, they further applied a proxy signature to allow a patient to delegate his signing capability to other people. This paper proposed a novel security and privacy preserving e-prescription system model based on smart cards. A new role, chemist, is included in the system model for settling the medicine dispute. We further presented a concrete identity-based (ID-based) group signature scheme and an ID-based proxy signature scheme to realize the proposed model. Main property of an ID-based system is that public key is simple user's identity and can be verified without extra public key certificates. Our ID-based group signature scheme can allow doctors to sign e-prescription anonymously. In a case of a medical dispute, identities of the doctors can be identified. The proposed ID-based proxy signature scheme can improve signing delegation and allows a delegation chain. The proposed e-prescription system based on our proposed two cryptographic schemes is more practical and efficient than Yang et al.'s system in terms of security, communication overheads, computational costs, practical considerations.

Reactor coolant pump testing using motor current signatures analysis

Energy Technology Data Exchange (ETDEWEB)

Burstein, N.; Bellamy, J.

1996-12-01

This paper describes reactor coolant pump motor testing carried out at Florida Power Corporation`s Crystal River plant using Framatome Technologies` new EMPATH (Electric Motor Performance Analysis and Trending Hardware) system. EMPATH{trademark} uses an improved form of Motor Current Signature Analysis (MCSA), technology, originally developed at Oak Ridge National Laboratories, for detecting deterioration in the rotors of AC induction motors. Motor Current Signature Analysis (MCSA) is a monitoring tool for motor driven equipment that provides a non-intrusive means for detecting the presence of mechanical and electrical abnormalities in the motor and the driven equipment. The base technology was developed at the Oak Ridge National Laboratory as a means for determining the affects of aging and service wear specifically on motor-operated valves used in nuclear power plant safety systems, but it is applicable to a broad range of electric machinery. MCSA is based on the recognition that an electric motor (ac or dc) driving a mechanical load acts as an efficient and permanently available transducer by sensing mechanical load variations, large and small, long-term and rapid, and converting them into variations in the induced current generated in the motor windings. The motor current variations, resulting from changes in load caused by gears, pulleys, friction, bearings, and other conditions that may change over the life of the motor, are carried by the electrical cables powering the motor and are extracted at any convenient location along the motor lead. These variations modulate the 60 Hz carrier frequency and appear as sidebands in the spectral plot.

Motor current and leakage flux signature analysis technique for condition monitoring

International Nuclear Information System (INIS)

Pillai, M.V.; Moorthy, R.I.K.; Mahajan, S.C.

1994-01-01

Till recently analysis of vibration signals was the only means available to predict the state of health of plant equipment. Motor current and leakage magnetic flux signature analysis is acquiring importance as a technique for detection of incipient damages in the electrical machines and as a supplementary technique for diagnostics of driven equipment such as centrifugal and reciprocating pumps. The state of health of the driven equipment is assessed by analysing time signal, frequency spectrum and trend analysis. For example, the pump vane frequency, piston stroke frequency, gear frequency and bearing frequencies are indicated in the current and flux spectra. By maintaining a periodic record of the amplitudes of various frequency lines in the frequency spectra, it is possible to understand the trend of deterioration of parts and components of the pump. All problems arising out of inappropriate mechanical alignment of vertical pumps are easily identified by a combined analysis of current, flux and vibration signals. It is found that current signature analysis technique is a sufficient method in itself for the analysis of state of health of reciprocating pumps and compressors. (author). 10 refs., 4 figs

Smart mobility in smart cities

Energy Technology Data Exchange (ETDEWEB)

Baucells, Aleta N.

2016-07-01

Cities are currently undergoing a transformation into the Smart concept, like Smartphones or SmartTV. Many initiatives are being developed in the framework of the Smart Cities projects, however, there is a lack of consistent indicators and methodologies to assess, finance, prioritize and implement this kind of projects. Smart Cities projects are classified according to six axes: Government, Mobility, Environment, Economy, People and Living. (Giffinger, 2007). The main objective of this research is to develop an evaluation model in relation to the mobility concept as one of the six axes of the Smart City classification and apply it to the Spanish cities. The evaluation was carried out in the 62 cities that made up in September 2015 the Spanish Network of Smart Cities (RECI- Red Española de Ciudades Inteligentes). This research is part of a larger project about Smart Cities’ evaluation (+CITIES), the project evaluates RECI’s cities in all the axes. The analysis was carried out taking into account sociodemographic indicators such as the size of the city or the municipal budget per inhabitant. The mobility’s evaluation in those cities has been focused in: sustainability mobility urban plans and measures to reduce the number of vehicles. The 62 cities from the RECI have been evaluated according to their degree of progress in several Smart Cities’ initiatives related to smart mobility. The applied methodology has been specifically made for this project. The grading scale has different ranks depending on the deployment level of smart cities’ initiatives. (Author)

Smart Home Dashboard. The intelligent energy management; Smart Home Dashboard. Das intelligente Energiemanagement

Energy Technology Data Exchange (ETDEWEB)

Stopczynski, Martin; Ghiglieri, Marco [Technische Univ. Darmstadt (Germany). Fachgebiet Sicherheit in der Informationstechnik

2012-07-01

Due to an increasingly smarter environment, however smart home components are used in households. A variety of household appliances can be monitored and controlled by smart plugs. An advantage of this development is the individual investigation of devices in terms of individual power consumption. However, the usability of the end user side also increases proportional to the number of existing devices. A possible access of external market participants is not currently implemented without major security problems. The authors of the contribution under consideration report on the Smart Home Dashboard, which provides a comprehensive power management. The smart home dashboard is intuitively operable and meets current safety standards. The aim of this paper is: (1) Adjustment of the handling of the recorded data to the current privacy policy; (2) Enforcement of the privacy of the end user by means of the implementation of smart grid protection objectives; (3) Providing a secure access for remote participants.

A Novel Certificateless Signature Scheme for Smart Objects in the Internet-of-Things

OpenAIRE

Yeh, Kuo-Hui; Su, Chunhua; Choo, Kim-Kwang Raymond; Chiu, Wayne

2017-01-01

Rapid advances in wireless communications and pervasive computing technologies have resulted in increasing interest and popularity of Internet-of-Things (IoT) architecture, ubiquitously providing intelligence and convenience to our daily life. In IoT-based network environments, smart objects are embedded everywhere as ubiquitous things connected in a pervasive manner. Ensuring security for interactions between these smart things is significantly more important, and a topic of ongoing interest...

Design and implementation of a smart card based healthcare information system.

Science.gov (United States)

Kardas, Geylani; Tunali, E Turhan

2006-01-01

Smart cards are used in information technologies as portable integrated devices with data storage and data processing capabilities. As in other fields, smart card use in health systems became popular due to their increased capacity and performance. Their efficient use with easy and fast data access facilities leads to implementation particularly widespread in security systems. In this paper, a smart card based healthcare information system is developed. The system uses smart card for personal identification and transfer of health data and provides data communication via a distributed protocol which is particularly developed for this study. Two smart card software modules are implemented that run on patient and healthcare professional smart cards, respectively. In addition to personal information, general health information about the patient is also loaded to patient smart card. Health care providers use their own smart cards to be authenticated on the system and to access data on patient cards. Encryption keys and digital signature keys stored on smart cards of the system are used for secure and authenticated data communication between clients and database servers over distributed object protocol. System is developed on Java platform by using object oriented architecture and design patterns.

Meeting current requirements. Data security in the smart metering; Den heutigen Anforderungen gerecht werden. Datensicherheit im Smart Metering

Energy Technology Data Exchange (ETDEWEB)

Zayer, Peter [VOLTARIS GmbH, Maxdorf (Germany); Wolf, Frank [VOLTARIS GmbH, Merzig (Germany)

2012-09-15

The requirements for the smart metering are extremely complex. On the one hand, the network operators and the suppliers need unadulterated data on consumption or supply. On the other hand, consumers see their privacy jeopardized because the individual user behavior can be read from the specific energy profile. Furthermore, according to the will of the legislator the smart meter or the measuring system is an active component of a smart grid and smart-market system. Right here it is important to eliminate the threat of hacker attacks. For the industry this results in the task of guaranteeing both the maximum data security as well as to provide a maximum nutritive value to the customer.

Electricity Markets, Smart Grids and Smart Buildings

Science.gov (United States)

Falcey, Jonathan M.

A smart grid is an electricity network that accommodates two-way power flows, and utilizes two-way communications and increased measurement, in order to provide more information to customers and aid in the development of a more efficient electricity market. The current electrical network is outdated and has many shortcomings relating to power flows, inefficient electricity markets, generation/supply balance, a lack of information for the consumer and insufficient consumer interaction with electricity markets. Many of these challenges can be addressed with a smart grid, but there remain significant barriers to the implementation of a smart grid. This paper proposes a novel method for the development of a smart grid utilizing a bottom up approach (starting with smart buildings/campuses) with the goal of providing the framework and infrastructure necessary for a smart grid instead of the more traditional approach (installing many smart meters and hoping a smart grid emerges). This novel approach involves combining deterministic and statistical methods in order to accurately estimate building electricity use down to the device level. It provides model users with a cheaper alternative to energy audits and extensive sensor networks (the current methods of quantifying electrical use at this level) which increases their ability to modify energy consumption and respond to price signals The results of this method are promising, but they are still preliminary. As a result, there is still room for improvement. On days when there were no missing or inaccurate data, this approach has R2 of about 0.84, sometimes as high as 0.94 when compared to measured results. However, there were many days where missing data brought overall accuracy down significantly. In addition, the development and implementation of the calibration process is still underway and some functional additions must be made in order to maximize accuracy. The calibration process must be completed before a reliable

Smart grids for smart cities: Smart energy management

International Nuclear Information System (INIS)

Kieny, Christophe

2013-01-01

Smart grids are currently a hot topic. Growing numbers of municipalities are experimenting with smart grids as the foundation for tomorrow's smart cities. And yet, end users are struggling to understand the innovative new energy distribution models just over the horizon. Our energy system is at a crossroads. And the coming years will tell us whether smart grids - whether they integrate renewable energy sources or not - will develop as a hybrid industry combining energy and IT or emerge as a full-fledged sector in and of itself. First and foremost, smart grids must be considered from a local, micro-economic standpoint, but one that also takes into account issues and interactions at the regional, national, EU, and global levels. Today, fighting climate change is a major challenge at both the national and global levels. The Kyoto Protocol and the Copenhagen Summit established a framework for crucial initiatives to combat climate change. The EU and France followed suit with their Climate and Energy Package and Grenelle de l'environnement environmental agenda. These policies set forth measures to fight climate change and to adapt to its impacts on people and the economy. France, for instance, set two basic targets to be achieved by 2020: - Make renewable energy a priority by promoting the development of energy from renewable sources to achieve the target of 23% renewables in the final energy mix. - Promote energy savings and increase energy efficiency by 20% and limit global warming to less than 2 deg. C over pre-industrial temperatures in industrialized nations by 2050 (around 1.2 deg. C above current temperatures). Tomorrow's grids will have to be smarter, which means incorporating information and communication technologies to provide the responsiveness and enhanced communication capabilities needed to meet the following challenges: - Integrating electricity from renewable sources; - Controlling demand; - Managing peak consumption; - Promoting widespread adoption of

Motor current signature analysis for determining operational readiness of motor-operated valves (MOVs)

International Nuclear Information System (INIS)

Kryter, R.C.; Haynes, H.D.

1987-01-01

Motor current signature analysis (MCSA) is a novel diagnostic process for condition monitoring of electric-motor-driven mechanical equipment (e.g., pumps, motor-operated valves, compressors, and processing machinery). The MCSA process identifies, characterizes, and trends over time the instantaneous load variations of mechanical equipment in order to diagnose changes in the condition of the equipment (e.g., due to degradation or service wear), which, if allowed to continue, may lead to failure. It monitors the instantaneous variations (noise content) in the electric current flowing through the power leads to the electric motor that drives the equipment. The motor itself thereby acts as a transducer, sensing both large and small, long-term and rapid, mechanical load variations and converting them to variations in the induced current generated in the motor windings. This motor current noise signature is detected, amplified, and further processed as needed to examine its time domain and frequency domain (spectral) characteristics. The operational principles of MCSA and the nonintrusive data collection apparatus and procedure used with MOVs will be described. Data collected from MOVs in both laboratory and in-plant environments will also be shown to illustrate the ability of MCSA to ''see'' the detailed inner workings of the valve and operator and thus to detect degraded performance at an incipient stage. (Set of 18 vugraphs)

Cultural Heritage in Smart City Environments

Science.gov (United States)

Angelidou, M.; Karachaliou, E.; Angelidou, T.; Stylianidis, E.

2017-08-01

This paper investigates how the historical and cultural heritage of cities is and can be underpinned by means of smart city tools, solutions and applications. Smart cities stand for a conceptual technology-and-innovation driven urban development model. By becoming `smart', cities seek to achieve prosperity, effectiveness and competitiveness on multiple socio-economic levels. Although cultural heritage is one of the many issues addressed by existing smart city strategies, and despite the documented bilateral benefits, our research about the positioning of urban cultural heritage within three smart city strategies (Barcelona, Amsterdam, and London) reveals fragmented approaches. Our findings suggest that the objective of cultural heritage promotion is not substantially addressed in the investigated smart city strategies. Nevertheless, we observe that cultural heritage management can be incorporated in several different strategic areas of the smart city, reflecting different lines of thinking and serving an array of goals, depending on the case. We conclude that although potential applications and approaches abound, cultural heritage currently stands for a mostly unexploited asset, presenting multiple integration opportunities within smart city contexts. We prompt for further research into bridging the two disciplines and exploiting a variety of use cases with the purpose of enriching the current knowledge base at the intersection of cultural heritage and smart cities.

Communication and Networking in Smart Grids

CERN Document Server

Xiao, Yang

2012-01-01

Appropriate for researchers, practitioners, and students alike, Communication and Networking in Smart Grids presents state-of-the-art approaches and novel technologies for communication networks in smart grids. It explains how contemporary grid networks are developed and deployed and presents a collection of cutting-edge advances to help improve current practice. Prominent researchers working on smart grids and in related fields around the world explain the fundamental aspects and applications of smart grids. Describing the role that communication and networking will play in future smart grids

Gesture recognition for smart home applications using portable radar sensors.

Science.gov (United States)

Wan, Qian; Li, Yiran; Li, Changzhi; Pal, Ranadip

2014-01-01

In this article, we consider the design of a human gesture recognition system based on pattern recognition of signatures from a portable smart radar sensor. Powered by AAA batteries, the smart radar sensor operates in the 2.4 GHz industrial, scientific and medical (ISM) band. We analyzed the feature space using principle components and application-specific time and frequency domain features extracted from radar signals for two different sets of gestures. We illustrate that a nearest neighbor based classifier can achieve greater than 95% accuracy for multi class classification using 10 fold cross validation when features are extracted based on magnitude differences and Doppler shifts as compared to features extracted through orthogonal transformations. The reported results illustrate the potential of intelligent radars integrated with a pattern recognition system for high accuracy smart home and health monitoring purposes.

A novel and smart design of superconducting fault current controller : implementation and verification for various fault condition

NARCIS (Netherlands)

Babar, M.; Al-Ammar, E.A.

2013-01-01

By the advent of the Smart Grid and integration of distributed generators, electrical networks are facing uncountable challenges. The existing protection schemes that simply limit the fault current to the predetermined set values may not perform optimally, and even the existing protection

Development of Rotor Diagnosis Method via Motor Current Signature Analysis

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Seok; Huh, Hyung; Kim, Min Hwan; Jeong, Kyeong Hoon; Lee, Gyu Mhan; Park, Jin Ho; Park, Keun Bae; Lee, Cheol Kwon; Hur, S

2006-01-15

A study on motor current signature analysis has been performed to monitor a journal bearing fault due to increasing clearance. It was known that the journal bearing clearance produces side band frequencies, the supplied current frequency plus and minus rotational rotor frequency in motor current. But the existence information of the side band frequencies is not sufficient to diagnose whether the journal bearing is safe or not. Four journal bearing sets with different clearances are used to measure the side band frequency amplitude and the rotor vibration amplitude versus the journal bearing clearance. The side band frequency amplitude and the rotor vibration amplitude are increased as the journal bearing clearance is increasing. This trend assures that ASME OM vibration guide line can be applied to estimate the journal bearing clearance size. In this research, 2.5 times the reference side band amplitude is suggested as an indicator of a journal bearing fault. Further study is necessary to make out more specific quantitative relations between the side band frequency amplitude and the journal bearing clearance of a motor.

Development of Rotor Diagnosis Method via Motor Current Signature Analysis

International Nuclear Information System (INIS)

Park, Jin Seok; Huh, Hyung; Kim, Min Hwan; Jeong, Kyeong Hoon; Lee, Gyu Mhan; Park, Jin Ho; Park, Keun Bae; Lee, Cheol Kwon; Hur, S.

2006-01-01

A study on motor current signature analysis has been performed to monitor a journal bearing fault due to increasing clearance. It was known that the journal bearing clearance produces side band frequencies, the supplied current frequency plus and minus rotational rotor frequency in motor current. But the existence information of the side band frequencies is not sufficient to diagnose whether the journal bearing is safe or not. Four journal bearing sets with different clearances are used to measure the side band frequency amplitude and the rotor vibration amplitude versus the journal bearing clearance. The side band frequency amplitude and the rotor vibration amplitude are increased as the journal bearing clearance is increasing. This trend assures that ASME OM vibration guide line can be applied to estimate the journal bearing clearance size. In this research, 2.5 times the reference side band amplitude is suggested as an indicator of a journal bearing fault. Further study is necessary to make out more specific quantitative relations between the side band frequency amplitude and the journal bearing clearance of a motor

Modeling ground vehicle acoustic signatures for analysis and synthesis

International Nuclear Information System (INIS)

Haschke, G.; Stanfield, R.

1995-01-01

Security and weapon systems use acoustic sensor signals to classify and identify moving ground vehicles. Developing robust signal processing algorithms for this is expensive, particularly in presence of acoustic clutter or countermeasures. This paper proposes a parametric ground vehicle acoustic signature model to aid the system designer in understanding which signature features are important, developing corresponding feature extraction algorithms and generating low-cost, high-fidelity synthetic signatures for testing. The authors have proposed computer-generated acoustic signatures of armored, tracked ground vehicles to deceive acoustic-sensored smart munitions. They have developed quantitative measures of how accurately a synthetic acoustic signature matches those produced by actual vehicles. This paper describes parameters of the model used to generate these synthetic signatures and suggests methods for extracting these parameters from signatures of valid vehicle encounters. The model incorporates wide-bandwidth and narrow- bandwidth components that are modulated in a pseudo-random fashion to mimic the time dynamics of valid vehicle signatures. Narrow- bandwidth feature extraction techniques estimate frequency, amplitude and phase information contained in a single set of narrow frequency- band harmonics. Wide-bandwidth feature extraction techniques estimate parameters of a correlated-noise-floor model. Finally, the authors propose a method of modeling the time dynamics of the harmonic amplitudes as a means adding necessary time-varying features to the narrow-bandwidth signal components. The authors present results of applying this modeling technique to acoustic signatures recorded during encounters with one armored, tracked vehicle. Similar modeling techniques can be applied to security systems

Usage monitoring of electrical devices in a smart home.

Science.gov (United States)

Rahimi, Saba; Chan, Adrian D C; Goubran, Rafik A

2011-01-01

Profiling the usage of electrical devices within a smart home can be used as a method for determining an occupant's activities of daily living. A nonintrusive load monitoring system monitors the electrical consumption at a single electrical source (e.g., main electric utility service entry) and the operating schedules of individual devices are determined by disaggregating the composite electrical consumption waveforms. An electrical device's load signature plays a key role in nonintrusive load monitoring systems. A load signature is the unique electrical behaviour of an individual device when it is in operation. This paper proposes a feature-based model, using the real power and reactive power as features for describing the load signatures of individual devices. Experimental results for single device recognition for 7 devices show that the proposed approach can achieve 100% classification accuracy with discriminant analysis using Mahalanobis distances.

SmartPrivacy for the smart grid : embedding privacy into the design of electricity conservation

Energy Technology Data Exchange (ETDEWEB)

Cavoukian, A. [Ontario Information and Privacy Commissioner, Toronto, ON (Canada); Polonetsky, J.; Wolf, C. [Future of Privacy Forum, Washington, DC (United States)

2009-11-15

Modernization efforts are underway to make the current electrical grid smarter. The future of the Smart Grid will be capable of informing consumers of their day-to-day energy use, curbing greenhouse gas emissions, and reducing consumers' energy bills. However, the Smart Grid also brings with it the possibility of collecting detailed information on individual energy consumption use and patterns within peoples' homes. This paper discussed the Smart Grid and its benefits, as well as the questions that should be examined regarding privacy. The paper also outlined the concept of SmartPrivacy and discussed its application to the Smart Grid scenario. Privacy by design foundational principles and Smart Grid components were also presented in an appendix. It was concluded that the information collected on a Smart Grid will form a library of personal information. The mishandling of this information could be extremely invasive of consumer privacy. 46 refs., 1 fig., 2 appendices.

Communication technologies in smart grid

Directory of Open Access Journals (Sweden)

Miladinović Nikola

2013-01-01

Full Text Available The role of communication technologies in Smart Grid lies in integration of large number of devices into one telecommunication system. This paper provides an overview of the technologies currently in use in electric power grid, that are not necessarily in compliance with the Smart Grid concept. Considering that the Smart Grid is open to the flow of information in all directions, it is necessary to provide reliability, protection and security of information.

Standards for smart living : a historical overview

NARCIS (Netherlands)

Mohammadi, M.M.; Hammink, C.J.H.W.

2016-01-01

This chapter provides an introduction into the current state of acceptance of smart home technology and its history. It starts with examining four stages of domestic technology, the current situation, and the future of smart home technology. This chapter aims to apply concepts from literature on the

Standards for Smart Living: A Historical Overview

NARCIS (Netherlands)

Mohammadi, M.; Hammink, J.H.W.; van Hoof, J.; Demeris, G.; Wouters, E.J.M.

2015-01-01

This chapter provides an introduction into the current state of acceptance of smart home technology and its history. It starts with examining four stages of domestic technology, the current situation, and the future of smart home technology. This chapter aims to apply concepts from literature on the

Smart grids - French Expertise

International Nuclear Information System (INIS)

2015-11-01

The adaptation of electrical systems is the focus of major work worldwide. Bringing electricity to new territories, modernizing existing electricity grids, implementing energy efficiency policies and deploying renewable energies, developing new uses for electricity, introducing electric vehicles - these are the challenges facing a multitude of regions and countries. Smart Grids are the result of the convergence of electrical systems technologies with information and communications technologies. They play a key role in addressing the above challenges. Smart Grid development is a major priority for both public and private-sector actors in France. The experience of French companies has grown with the current French electricity system, a system that already shows extensive levels of 'intelligence', efficiency and competitiveness. French expertise also leverages substantial competence in terms of 'systems engineering', and can provide a tailored response to meet all sorts of needs. French products and services span all the technical and commercial building blocks that make up the Smart Grid value chain. They address the following issues: Improving the use and valuation of renewable energies and decentralized means of production, by optimizing the balance between generation and consumption. Strengthening the intelligence of the transmission and distribution grids: developing 'Supergrid', digitizing substations in transmission networks, and automating the distribution grids are the focus of a great many projects designed to reinforce the 'self-healing' capacity of the grid. Improving the valuation of decentralized flexibilities: this involves, among others, deploying smart meters, reinforcing active energy efficiency measures, and boosting consumers' contribution to grid balancing, via practices such as demand response which implies the aggregation of flexibility among residential, business, and/or industrial sites. Addressing current technological challenges, in

Energy conservation through smart homes in a smart city: A lesson for Singapore households

International Nuclear Information System (INIS)

Bhati, Abhishek; Hansen, Michael; Chan, Ching Man

2017-01-01

Energy saving is a hot topic due to the proliferation of climate changes and energy challenges globally. However, people's perception about using smart technology for energy saving is still in the concept stage. This means that people talk about environmental awareness readily, yet in reality, they accept to pay the given energy bill. Due to the availability of electricity and its integral role, modulating consumers’ attitudes towards energy savings can be a challenge. Notably, the gap in today's smart technology design in smart homes is the understanding of consumers’ behaviour and the integration of this understanding into the smart technology. As part of the Paris Climate change agreement (2015), it is paramount for Singapore to introduce smart technologies targeted to reduce energy consumption. This paper focused on the perception of Singapore households on smart technology and its usage to save energy. Areas of current research include: (1) energy consumption in Singapore households, (2) public programs and policies in energy savings, (3) use of technology in energy savings, and (4) household perception of energy savings in smart homes. Furthermore, three case studies are reviewed in relation to smart homes and smart technology, while discussing the maturity of existing solutions. - Highlights: • Analyse perception of Singapore households about the usage of smart technology to save energy. • Reviews energy consumption, public policies and household perception of energy savings. • Three case studies were developed and reviewed in relation to smart homes and smart technology. • Analyse research gap of household behaviours and perceptions as smart home design focus.

Smart material screening machines using smart materials and controls

Science.gov (United States)

Allaei, Daryoush; Corradi, Gary; Waigand, Al

2002-07-01

The objective of this product is to address the specific need for improvements in the efficiency and effectiveness in physical separation technologies in the screening areas. Currently, the mining industry uses approximately 33 billion kW-hr per year, costing 1.65 billion dollars at 0.05 cents per kW-hr, of electrical energy for physical separations. Even though screening and size separations are not the single most energy intensive process in the mining industry, they are often the major bottleneck in the whole process. Improvements to this area offer tremendous potential in both energy savings and production improvements. Additionally, the vibrating screens used in the mining processing plants are the most costly areas from maintenance and worker health and safety point of views. The goal of this product is to reduce energy use in the screening and total processing areas. This goal is accomplished by developing an innovative screening machine based on smart materials and smart actuators, namely smart screen that uses advanced sensory system to continuously monitor the screening process and make appropriate adjustments to improve production. The theory behind the development of Smart Screen technology is based on two key technologies, namely smart actuators and smart Energy Flow ControlT (EFCT) strategies, developed initially for military applications. Smart Screen technology controls the flow of vibration energy and confines it to the screen rather than shaking much of the mass that makes up the conventional vibratory screening machine. Consequently, Smart Screens eliminates and downsizes many of the structural components associated with conventional vibratory screening machines. As a result, the surface area of the screen increases for a given envelope. This increase in usable screening surface area extends the life of the screens, reduces required maintenance by reducing the frequency of screen change-outs and improves throughput or productivity.

Current Trends in the Detection of Sociocultural Signatures: Data-Driven Models

Energy Technology Data Exchange (ETDEWEB)

Sanfilippo, Antonio P.; Bell, Eric B.; Corley, Courtney D.

2014-09-15

available that are shaping social computing as a strongly data-driven experimental discipline with an increasingly stronger impact on the decision-making process of groups and individuals alike. In this chapter, we review current advances and trends in the detection of sociocultural signatures. Specific embodiments of the issues discussed are provided with respect to the assessment of violent intent and sociopolitical contention. We begin by reviewing current approaches to the detection of sociocultural signatures in these domains. Next, we turn to the review of novel data harvesting methods for social media content. Finally, we discuss the application of sociocultural models to social media content, and conclude by commenting on current challenges and future developments.

Conceptions of end users in current smart grid research and opportunities for further social scientific research on users in smart grids

DEFF Research Database (Denmark)

Larsen, Lars Ege

of existing knowledge and seeing new possibilities for social scientific research where knowledge gaps appear. Different user representations and user roles are found through a content analysis of project related documents from a selection of European and North American smart grid projects. It is argued......Many resources have been put into preparing our energy provision systems for a future with more distributed and intermittent energy production. Especially in Europe and the US a large amount of public research funds has gone to the research field of smart grids. Within policy communities and smart...... grid research communities there is a consensus that a changed user-system relation where users become sensitive to system level constraints is a key element of smart grids. However, the way this sensitivity is conceptualized and the nature of claims differs from one project to the other and sometimes...

Biometrics and smart cards combine to offer high security

International Nuclear Information System (INIS)

Seidman, S.

1986-01-01

This paper discusses the Smart Card a plastic credit card sized package with an embedded computer chip which encompasses a level of technical sophistication which makes it virtually impossible to counterfeit. The question of legitimacy of the person using the Card for physical, computer, or network access can be answered by storing a biometric template of the authorized user in the Smart Card's unalterable memory. The bimetric template can be based upon a retina print, a hand print, a finger print, a wrist-vein print, a voice print, or pseudo-biometrics, such as signature dynamics, gait dynamics or keyboard typing patterns. These Cards will function only when they are being used by the authorized individuals to whom they are issued

Smart grid: hope or hype?

DEFF Research Database (Denmark)

Lunde, Morten; Røpke, Inge; Heiskanen, Eva

2016-01-01

how their (intentional or unintentional) choices serve to create or maintain certain boundaries in smart grid development: for example, an exclusive focus on electricity within the broader context of a sustainable energy system. As serious investment starts being made in the smart grid, concepts like......The smart grid is an important but ambiguous element in the future transition of the European energy system. The current paper unpacks one influential national vision of the smart grid to identify what kinds of expectations guide the work of smart grid innovators and how the boundaries of the smart...... research and development and to attract new players into the field. A scenario process such as that demonstrated in this article can serve to articulate some of these implicit assumptions and help actors to navigate the ongoing transition. On the basis of our analysis, European policy makers might consider...

SMART-NPA evaluation report

Energy Technology Data Exchange (ETDEWEB)

Kim, Hee Kyung; Lee, G. H.; Yoon, H. Y.; Kim, H. C. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-05-01

SMART(System-integrated Modular Advanced ReacTor) is a 330 MWt integral reactor which is currently under development at Korea Atomic Energy Research Institute for desalination and electricity generation. SMART-NPA is the second user interface part of TASS/SMR in order to improve GUI(Graphic User Interface). Using SMART-NPA the analyzer not only can see the running status of SMART but make change of major SMART parameters. TASS/SMR, the calculation part, was written in Fortran whereas the first user interface part, called TASSWin, was written in Visual C{sup ++}. For these reason, the ActiveX control was chosen as the solution of SMART-NPA development. The five ActiveX controls were built in Visual Basic. They were Overview, Primary, Secondary, PRHRS and Control Panel ActiveX controls. They were contained in tab control, and can easily selected by user. They could communicate with TASSWin using many interface functions. The graph screens were also developed for the display of major variable's trend. The purpose of this report is the verification of SMART-NPA. The input decks were 100-200-100% power maneuvering operation, Feed Line Break Accident and user's input on Control Panel. The results of SMART-NPA for these cases were compared with the results of TASS/SMR stand alone version. The comparison results were same respectively. And all screens of SMART-NPA reflected the calculated results of TASS/SMR very well. That means SMART-NPA was calculated results of TASS/SMR very well. That means SMART-NPA was verified. 9 refs., 30 figs., 4 tabs. (Author)

Development of regulatory policy for SMART-P

Energy Technology Data Exchange (ETDEWEB)

Lee, S. H.; Lee, Y. H.; Moo, Philip; Koh, B. J.; Son, M. K.; Han, G. H.; Kim, D. H. [Korea Association for Nuclear Technology, Daejeon (Korea, Republic of)

2004-06-15

KAERI promoted the construction of a research reactor, SMART-P, the reduced scale of SMART, with intent to demonstrate the safety and performance of SMART. According to this progress, the development of regulatory process for SMART-P became necessary. The establishment of regulatory policy, based on the current regulatory guidelines as well as technical aspect, became essential matters. Considering the on-going small and medium size reactors in near future, the selection of the appropriate measure in the existing regulatory process to SMART-P is very important. Thus the schematic study for the applicable licensing procedure and regulatory requirements suitable for SMART-P is required.

Development of regulatory policy for SMART-P

Energy Technology Data Exchange (ETDEWEB)

Lee, S. H.; Moon, S. H.; Lee, Y. H.; Son, M. K.; Han, K. H.; Kim, D. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

2003-06-15

KAERI promoted the construction of a research reactor, SMART-P, the reduced scale of SMART, with intent to demonstrate the safety and performance of SMART. According to this progress, the development of regulatory process for SMART-P became necessary. The establishment of regulatory policy, based on the current regulatory guidelines as well as technical aspect, became essential matters. Considering the on-going small and medium size reactors m near future, the selection of the appropriate measure in the existing regulatory process to SMART-P is very important. Thus the schematic study for the applicable licensing procedure and regulatory requirements suitable for SMART-P is required.

Decentral Smart Grid Control

Science.gov (United States)

Schäfer, Benjamin; Matthiae, Moritz; Timme, Marc; Witthaut, Dirk

2015-01-01

Stable operation of complex flow and transportation networks requires balanced supply and demand. For the operation of electric power grids—due to their increasing fraction of renewable energy sources—a pressing challenge is to fit the fluctuations in decentralized supply to the distributed and temporally varying demands. To achieve this goal, common smart grid concepts suggest to collect consumer demand data, centrally evaluate them given current supply and send price information back to customers for them to decide about usage. Besides restrictions regarding cyber security, privacy protection and large required investments, it remains unclear how such central smart grid options guarantee overall stability. Here we propose a Decentral Smart Grid Control, where the price is directly linked to the local grid frequency at each customer. The grid frequency provides all necessary information about the current power balance such that it is sufficient to match supply and demand without the need for a centralized IT infrastructure. We analyze the performance and the dynamical stability of the power grid with such a control system. Our results suggest that the proposed Decentral Smart Grid Control is feasible independent of effective measurement delays, if frequencies are averaged over sufficiently large time intervals.

Decentral Smart Grid Control

International Nuclear Information System (INIS)

Schäfer, Benjamin; Matthiae, Moritz; Timme, Marc; Witthaut, Dirk

2015-01-01

Stable operation of complex flow and transportation networks requires balanced supply and demand. For the operation of electric power grids—due to their increasing fraction of renewable energy sources—a pressing challenge is to fit the fluctuations in decentralized supply to the distributed and temporally varying demands. To achieve this goal, common smart grid concepts suggest to collect consumer demand data, centrally evaluate them given current supply and send price information back to customers for them to decide about usage. Besides restrictions regarding cyber security, privacy protection and large required investments, it remains unclear how such central smart grid options guarantee overall stability. Here we propose a Decentral Smart Grid Control, where the price is directly linked to the local grid frequency at each customer. The grid frequency provides all necessary information about the current power balance such that it is sufficient to match supply and demand without the need for a centralized IT infrastructure. We analyze the performance and the dynamical stability of the power grid with such a control system. Our results suggest that the proposed Decentral Smart Grid Control is feasible independent of effective measurement delays, if frequencies are averaged over sufficiently large time intervals. (paper)

A simulation model for aligning smart home networks and deploying smart objects

DEFF Research Database (Denmark)

Lynggaard, Per

Smart homes use sensor based networks to capture activities and offer learned services to the user. These smart home networks are challenging because they mainly use wireless communication at frequencies that are shared with other services and equipments. One of the major challenges...... is the interferences produced by WiFi access points in smart home networks which are expensive to overcome in terms of battery energy. Currently, different method exists to handle this. However, they use complex mechanisms such as sharing frequencies, sharing time slots, and spatial reuse of frequencies. This paper...... introduces a unique concept which saves battery energy and lowers the interference level by simulating the network alignment and assign the necessary amount of transmit power to each individual network node and finally, deploy the smart objects. The needed transmit powers are calculated by the presented...

Using smart meter to monitor the energy consumption of home appliances

International Nuclear Information System (INIS)

Dong, M.; Xu, W.

2010-01-01

A smart meter provides the foundation for the smart grid, which represent the future electric system in terms of communications, sensors and automation to improve the flexibility, reliability and efficiency of power systems. Smart meters are installed at the utility-customer interface point to provide real-time power usage and price data to each electricity user. The purpose is to create customer awareness on electricity consumption and help users to conserve energy. Smart meters are being deployed throughout North America to replace most traditional meters. However, this paper discussed a major technical gap of the smart meter. Existing smart meters do not provide households with enough feedback needed to achieve effective energy saving. In order to support the energy conservation effort of a customer, the whole house energy data must be displayed on minute or second basis, and it must also be broken down into individual appliance levels. The data of an appliance's energy usage is the most useful information for users to modify their actions and conserve energy. This paper proposed to make the smart meter capable of reporting the overall consumption of a household, as well as monitoring how individual appliances use electricity. It presented a method on using different appliance signatures to identify appliances and make energy estimations on their respective consumptions. Paired with time-of-use or other real time pricing mechanisms, the method enables customers to save energy. This paper also demonstrated how to implement an algorithm on the smart meter platform. Future work will focus on making the algorithm more accurate and faster, and on integrating the smart meter with an appliance energy monitoring system. 21 refs., 6 tabs., 3 figs.

Approach for smart application to desalination and power generation

International Nuclear Information System (INIS)

Chang Moon Hee; Kim Si-Hwan

1998-01-01

A 330 MWt integral reactor, SMART, and an integrated nuclear seawater desalination system coupled with SMART are currently under conceptual development at KAERI. The SMART will provide energy to the desalination system either in the form of heat or electricity, or both. The integrated nuclear desalination system aims to produce about 40,000 m 3 /day potable water from seawater for demonstration purposes. The remaining energy produced by SMART will be converted into electrical energy. Several important factors are especially considered in the process of SMART and its application system development. The development emphasizes the adoption of technically proven and advanced technology, measures to secure the safety and reliability of the reactor system, consideration of the desalination process for coupling with SMART, a licensing strategy for SMART and the integrated nuclear desalination system, and international cooperation for promoting nuclear desalination with the SMART development program. The current effort to establish the concept of SMART and its application for desalination is being pursued intensively to secure the safety and reliability of SMART, to prove the implemented concepts/technology considering the coupling with the desalination process, and to formulate an optimum licensing approach. This paper aims to present the technical and strategic approach of SMART and its application system. (author)

Trends and Potentials of the Smart Grid Infrastructure: From ICT Sub-System to SDN-Enabled Smart Grid Architecture

Directory of Open Access Journals (Sweden)

Jaebeom Kim

2015-10-01

Full Text Available Context and situational awareness are key features and trends of the smart grid and enable adaptable, flexible and extendable smart grid services. However, the traditional hardware-dependent communication infrastructure is not designed to identify the flow and context of data, and it focuses only on packet forwarding using a pre-defined network configuration profile. Thus, the current network infrastructure may not dynamically adapt the various business models and services of the smart grid system. To solve this problem, software-defined networking (SDN is being considered in the smart grid, but the design, architecture and system model need to be optimized for the smart grid environment. In this paper, we investigate the state-of-the-art smart grid information subsystem, communication infrastructure and its emerging trends and potentials, called an SDN-enabled smart grid. We present an abstract business model, candidate SDN applications and common architecture of the SDN-enabled smart grid. Further, we compare recent studies into the SDN-enabled smart grid depending on its service functionalities, and we describe further challenges of the SDN-enabled smart grid network infrastructure.

Smart Grid: Smart Customer Policy Needs

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

In September 2010, the International Energy Agency (IEA) held a workshop on the regulatory, market and consumer policies necessary to ensure that smart grids are deployed with adequate consideration of their risks and benefits to all stakeholders. This was one of several workshops that brought together energy providers, network operators, technology developers, regulators, customers and government policy makers to discuss smart grid technology and policy. The Smart Grid - Smart Customer Policies workshop allowed stakeholders to: gain a perspective on key issues and barriers facing early deployment of smart grids; hear expert opinion on regulatory, consumer and market challenges to smart grids; discuss smart grid-smart customer policy priorities; and build consensus on the technology and policy ingredients needed for customer-friendly smart grid deployments. Drawing on workshop discussions, the following paper lays out a logical framework to maximise the benefits and minimise the risks that smart grids pose for customers. The paper also describes key policy research questions that will guide future IEA research on this topic.

Safety Design for Smart Electric Vehicle Charging with Current and Multiplexing Control

Energy Technology Data Exchange (ETDEWEB)

Chung, Ching-Yen; Youn, Edward; Chynoweth, Joshua; Qiu, Charlie; Chu, Chi-Cheng; Gadh, Rajit

2013-10-21

As Electric Vehicles (EVs) increase, charging infrastructure becomes more important. When during the day there is a power shortage, the charging infrastructure should have the options to either shut off the power to the charging stations or to lower the power to the EVs in order to satisfy the needs of the grid. This paper proposes a design for a smart charging infrastructure capable of providing power to several EVs from one circuit by multiplexing power and providing charge control and safety systems to prevent electric shock. The safety design is implemented in different levels that include both the server and the smart charging stations. With this smart charging infrastructure, the shortage of energy in a local grid could be solved by our EV charging management system.

Metacognitive components in smart learning environment

Science.gov (United States)

Sumadyo, M.; Santoso, H. B.; Sensuse, D. I.

2018-03-01

Metacognitive ability in digital-based learning process helps students in achieving learning goals. So that digital-based learning environment should make the metacognitive component as a facility that must be equipped. Smart Learning Environment is the concept of a learning environment that certainly has more advanced components than just a digital learning environment. This study examines the metacognitive component of the smart learning environment to support the learning process. A review of the metacognitive literature was conducted to examine the components involved in metacognitive learning strategies. Review is also conducted on the results of study smart learning environment, ranging from design to context in building smart learning. Metacognitive learning strategies certainly require the support of adaptable, responsive and personalize learning environments in accordance with the principles of smart learning. The current study proposed the role of metacognitive component in smart learning environment, which is useful as the basis of research in building environment in smart learning.

Preliminary design of smart fuel

International Nuclear Information System (INIS)

Kim, Y.; Ha, D.; Park, S.; Nahm, K.; Lee, K.; Kim, J.

2007-01-01

SMART (System-integrated Modular Advanced Reactor) is a novel light water rector with a modular, integral primary system configuration. This concept has been developing a 660 MWt by Korean Nuclear Power Industry Group with KAERI. SMART is being developed for use as an energy source for small-scale power generation and seawater desalination. Although the design of SMART is based on the current pressurized water reactor technology, new technologies such as enhanced safety, and passive safety have been applied, and system simplification and modularization, innovations in manufacturing and installation technologies have been implemented culminating in a design that has enhanced safety and economy, and is environment -friendly. In this paper described the preliminary design of the nuclear Fuel for this SMART, the design concept and the characteristics of SMART Fuel. In specially this paper describe the optimization of grid span adjustment to improve the thermal performance of the SMART Fuel as well as to improve the seismic resistance performance of the SMART Fuel, it is not easy to improve the both performance simultaneously because of design parameter of each performance inversely proportional. SMART Fuel enable to extra-long extended fuel cycle length and resistance of proliferation, enhanced safety, improved economics and reduced nuclear waste

Green Technology for Smart Cities

Science.gov (United States)

Casini, M.

2017-08-01

In view of the enormous social and environmental changes at the global level, more and more cities worldwide have directed their development strategies towards smart policies aimed at sustainable mobility, energy upgrading of the building stock, increase of energy production from renewable sources, improvement of waste management and implementation of ICT infrastructures. The goal is to turn into Smart Cities, able to improve the quality of life of their inhabitants by offering a lasting opportunity for cultural, economic and social growth within a healthy, safe, stimulating and dynamic environment. After an overview of the role of cities in climate changes and environmental pollution worldwide, the article provides an up to date definition of Smart City and of its main expected features, focussing on technology innovation, smart governance and main financing and support programs. An analysis of the most interesting initiatives at the international level pursued by cities investigating the three main areas of Green Buildings, Smart grid-Smart lighting, and Smart mobility is given, with the objective to offer a broad reference for the identification of development sustainable plans and programs at the urban level within the current legislative framework.

Safety requirements applicable to the SMART design

International Nuclear Information System (INIS)

Seul, Kwang Won; Kim, Wee Kyong; Kim, Hho Jung

1999-01-01

The 330 MW thermal power of integral reactor, named SMART (System integrated Modular Advanced ReacTor), is under development at KAERI for seawater desalination application and electricity generation. The final product of nuclear desalination plant (NDP) is electricity and fresh water. Thus, in addition to the protection of the public around the plant facility from the possible release of radioactive materials, the fresh water should be prevented from radioactivity contamination. In this study, to ensure the safety of SMART reactor in the early stage of design development, the safety requirements applicable to the SMART design were investigated, based on the current regulatory requirements for the existing NPPs and the advanced light water reactor (LWR) designs. The interface requirements related to the desalination facility were also investigated, based on the recent IAEA research activities pertaining to the NDP. As a result, it was found that the current regulatory requirements and guidance for the existing NPPs and advanced LWR designs are applicable to the SMART design and its safety evaluation. However, the safety requirements related to the SMART-specific design and the desalination plant are needed to develop in the future to assure the safety of the SMART reactor

The smart meter and a smarter consumer: quantifying the benefits of smart meter implementation in the United States.

Science.gov (United States)

Cook, Brendan; Gazzano, Jerrome; Gunay, Zeynep; Hiller, Lucas; Mahajan, Sakshi; Taskan, Aynur; Vilogorac, Samra

2012-04-23

The electric grid in the United States has been suffering from underinvestment for years, and now faces pressing challenges from rising demand and deteriorating infrastructure. High congestion levels in transmission lines are greatly reducing the efficiency of electricity generation and distribution. In this paper, we assess the faults of the current electric grid and quantify the costs of maintaining the current system into the future. While the proposed "smart grid" contains many proposals to upgrade the ailing infrastructure of the electric grid, we argue that smart meter installation in each U.S. household will offer a significant reduction in peak demand on the current system. A smart meter is a device which monitors a household's electricity consumption in real-time, and has the ability to display real-time pricing in each household. We conclude that these devices will provide short-term and long-term benefits to utilities and consumers. The smart meter will enable utilities to closely monitor electricity consumption in real-time, while also allowing households to adjust electricity consumption in response to real-time price adjustments.

Smart grid

International Nuclear Information System (INIS)

Choi, Dong Bae

2001-11-01

This book describes press smart grid from basics to recent trend. It is divided into ten chapters, which deals with smart grid as green revolution in energy with introduction, history, the fields, application and needed technique for smart grid, Trend of smart grid in foreign such as a model business of smart grid in foreign, policy for smart grid in U.S.A, Trend of smart grid in domestic with international standard of smart grid and strategy and rood map, smart power grid as infrastructure of smart business with EMS development, SAS, SCADA, DAS and PQMS, smart grid for smart consumer, smart renewable like Desertec project, convergence IT with network and PLC, application of an electric car, smart electro service for realtime of electrical pricing system, arrangement of smart grid.

Motor current signature analysis for gearbox condition monitoring under transient speeds using wavelet analysis and dual-level time synchronous averaging

Science.gov (United States)

Bravo-Imaz, Inaki; Davari Ardakani, Hossein; Liu, Zongchang; García-Arribas, Alfredo; Arnaiz, Aitor; Lee, Jay

2017-09-01

This paper focuses on analyzing motor current signature for fault diagnosis of gearboxes operating under transient speed regimes. Two different strategies are evaluated, extensively tested and compared to analyze the motor current signature in order to implement a condition monitoring system for gearboxes in industrial machinery. A specially designed test bench is used, thoroughly monitored to fully characterize the experiments, in which gears in different health status are tested. The measured signals are analyzed using discrete wavelet decomposition, in different decomposition levels using a range of mother wavelets. Moreover, a dual-level time synchronous averaging analysis is performed on the same signal to compare the performance of the two methods. From both analyses, the relevant features of the signals are extracted and cataloged using a self-organizing map, which allows for an easy detection and classification of the diverse health states of the gears. The results demonstrate the effectiveness of both methods for diagnosing gearbox faults. A slightly better performance was observed for dual-level time synchronous averaging method. Based on the obtained results, the proposed methods can used as effective and reliable condition monitoring procedures for gearbox condition monitoring using only motor current signature.

Technology comparison of wireless of control networks for smart home and smart metering applications; Technologievergleich drahtloser Steuernetzwerke fuer Smart Home und Smart Metering Anwendungen

Energy Technology Data Exchange (ETDEWEB)

Langhammer, N.; Kays, R. [Technische Univ. Dortmund (Germany). Lehrstuhl fuer Kommunikationstechnik

2012-07-01

Smart grid power systems require a continuous communication technology networking at all levels of the hierarchy. In addition to large industrial consumers in the higher network levels, components in low voltage networks must be integrated into the smart grid. The realization of a robust control network for smart home and smart metering applications in the residential environment requires a major challenge. Due to the easy upgradeability and the great flexibility, the utilization of wireless technologies is very attractive. In practice, however, many different standards are competing. Examples for this include IEEE 802.15.4 and Konnex-RF. A tendency towards a de-facto standard is not yet in sight. In addition, the individual performance of the various technologies is difficult to estimate due to the large variety of parameters. This complicates the selection and commitment to a particular technology. However, in order to make a decision, the authors of the contribution under consideration report on an objective comparison of the new communication technology layers of the current wireless control networks. As a comparison, the parameters of reliable indoor coverage and the expected energy consumption are used.

Energy-Smart Cities-DK

DEFF Research Database (Denmark)

Fertner, Christian; Groth, Niels Boje

In this report we present some overall results and the methodology behind the Energy-Smart Cities-DK model, a benchmark of the energy situation of Danish municipalities. The analysis was conducted by researchers at the University of Copenhagen, based on work by researchers at the Vienna University...... in exploring the operationalization of the smart city, a term which is widely used in current city development strategies. There are various definitions for that concept – we think the most important characteristic of a smart city is that it can activate and use the resources and capital available in a most...... efficient way – also in the long run, that means in a sustainable way.A key issue for smart city development is energy, mainly related to two future urban challenges: Climate change and resource scarcity (Droege, 2011; European Commission, 2010). At this background, the University of Copenhagen, Department...

Smart TV Privacy Risks and Protection Measures

OpenAIRE

Ghiglieri, Marco

2017-01-01

Smart TVs have been becoming more popular in recent years. They are not entirely new devices, they are rather traditional TVs with current technology and increased functionality. In addition to streaming traditional broadcast content, Smart TVs facilitate access to Internet content and services. Thus, different Internet functionality on Smart TVs is available. For instance, Facebook, different video on demand services or online games. Some Internet functionality can access and uti...

Smart TV privacy risks and protection measures

OpenAIRE

Ghiglieri, Marco

2017-01-01

Smart TVs have been becoming more popular in recent years. They are not entirely new devices, they are rather traditional TVs with current technology and increased functionality. In addition to streaming traditional broadcast content, Smart TVs facilitate access to Internet content and services. Thus, different Internet functionality on Smart TVs is available. For instance, Facebook, different video on demand services or online games. Some Internet functionality can access and uti...

Basic design report of SMART

International Nuclear Information System (INIS)

Chang, M. H.; Yeo, J. W.; Zee, Q. S.; Lee, D. J.; Park, K. B.; Koo, I. S.; Kim, H. C.; Kim, J. I.

2002-03-01

KAERI has been developing a 330MWt integral reactor, SMART and its application system since 1997. SMART is being developed for use as an energy source for small-scale power generation and seawater desalination. The SMART system can produce portable water of 40.000m 3 /day using the MED-TVC desalination process and about 90MW of electricity. Although the design of SMART is based on the current pressurized water reactor technology, new technologies such as inherent safety and passive safety have been applied, and system simplification and modularization, innovations in manufacturing and installation technologies have been implemented culminating in a design that has enhanced safety and economy, and is environment-friendly. The objective of this design report is to provide the overall information on the basic design of SMART NSSS, and the applied technologies. The information covers mainly NSSS design with some information on the desalination system. For the secondary system, only the information directly related to the coupling with NSSS are covered

Smart assistants for smart homes

OpenAIRE

Rasch, Katharina

2013-01-01

The smarter homes of tomorrow promise to increase comfort, aid elderly and disabled people, and help inhabitants save energy. Unfortunately, smart homes today are far from this vision – people who already live in such a home struggle with complicated user interfaces, inflexible home configurations, and difficult installation procedures. Under these circumstances, smart homes are not ready for mass adoption. This dissertation addresses these issues by proposing two smart assistants for smart h...

SMART-KKS. Chances and economic efficiency; SMART-KKS. Chancen und Wirtschaftlichkeit

Energy Technology Data Exchange (ETDEWEB)

Deiss, Rainer [EnBW Regional AG, Stuttgart (Germany); Buechler, Markus [Schweizerische Gesellschaft fuer Korrosionsschutz, Zuerich (Switzerland); Naleppa, Stefan [RBS wave GmbH, Stuttgart (Germany)

2011-07-01

Future demands on KKS cannot be met by the current remote monitoring technology. New remote monitoring concepts and smart protective current concepts will be required to make KKS more economical and more reliable. The contribution presents new findings on AC corrosion in order to show how future KKS technology may be designed.

Smart energy and smart energy systems

DEFF Research Database (Denmark)

Lund, Henrik; Østergaard, Poul Alberg; Connolly, David

2017-01-01

In recent years, the terms “Smart Energy” and “Smart Energy Systems” have been used to express an approach that reaches broader than the term “Smart grid”. Where Smart Grids focus primarily on the electricity sector, Smart Energy Systems take an integrated holistic focus on the inclusion of more...... sectors (electricity, heating, cooling, industry, buildings and transportation) and allows for the identification of more achievable and affordable solutions to the transformation into future renewable and sustainable energy solutions. This paper first makes a review of the scientific literature within...... the field. Thereafter it discusses the term Smart Energy Systems with regard to the issues of definition, identification of solu- tions, modelling, and integration of storage. The conclusion is that the Smart Energy System concept represents a scientific shift in paradigms away from single-sector thinking...

ABS-SmartComAgri: An Agent-Based Simulator of Smart Communication Protocols in Wireless Sensor Networks for Debugging in Precision Agriculture.

Science.gov (United States)

García-Magariño, Iván; Lacuesta, Raquel; Lloret, Jaime

2018-03-27

Smart communication protocols are becoming a key mechanism for improving communication performance in networks such as wireless sensor networks. However, the literature lacks mechanisms for simulating smart communication protocols in precision agriculture for decreasing production costs. In this context, the current work presents an agent-based simulator of smart communication protocols for efficiently managing pesticides. The simulator considers the needs of electric power, crop health, percentage of alive bugs and pesticide consumption. The current approach is illustrated with three different communication protocols respectively called (a) broadcast, (b) neighbor and (c) low-cost neighbor. The low-cost neighbor protocol obtained a statistically-significant reduction in the need of electric power over the neighbor protocol, with a very large difference according to the common interpretations about the Cohen's d effect size. The presented simulator is called ABS-SmartComAgri and is freely distributed as open-source from a public research data repository. It ensures the reproducibility of experiments and allows other researchers to extend the current approach.

The smart meter and a smarter consumer: quantifying the benefits of smart meter implementation in the United States

Directory of Open Access Journals (Sweden)

Cook Brendan

2012-04-01

Full Text Available Abstract The electric grid in the United States has been suffering from underinvestment for years, and now faces pressing challenges from rising demand and deteriorating infrastructure. High congestion levels in transmission lines are greatly reducing the efficiency of electricity generation and distribution. In this paper, we assess the faults of the current electric grid and quantify the costs of maintaining the current system into the future. While the proposed “smart grid” contains many proposals to upgrade the ailing infrastructure of the electric grid, we argue that smart meter installation in each U.S. household will offer a significant reduction in peak demand on the current system. A smart meter is a device which monitors a household’s electricity consumption in real-time, and has the ability to display real-time pricing in each household. We conclude that these devices will provide short-term and long-term benefits to utilities and consumers. The smart meter will enable utilities to closely monitor electricity consumption in real-time, while also allowing households to adjust electricity consumption in response to real-time price adjustments.

Passive heat removal characteristics of SMART

Energy Technology Data Exchange (ETDEWEB)

Seo, Jae Kwang; Kang, Hyung Seok; Yoon, Joo Hyun; Kim, Hwan Yeol; Cho, Bong Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1998-12-31

A new advanced integral reactor of 330 MWt thermal capacity named SMART (System-Integrated Modular Advanced Reactor) is currently under development in Korea Atomic Energy Research Institute (KAERI) for multi-purpose applications. Modular once-through steam generator (SG) and self-pressurizing pressurizer equipped with wet thermal insulator and cooler are essential components of the SMART. The SMART provides safety systems such as Passive Residual Heat Removal System (PRHRS). In this study, a computer code for performance analysis of the PRHRS is developed by modeling relevant components and systems of the SMART. Using this computer code, a performance analysis of the PRHRS is performed in order to check whether the passive cooling concept using the PRHRS is feasible. The results of the analysis show that PRHRS of the SMART has excellent passive heat removal characteristics. 2 refs., 4 figs., 1 tab. (Author)

Synergisms between smart metering and smart grid; Synergien zwischen Smart Metering und Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Maas, Peter [IDS GmbH, Ettlingen (Germany)

2010-04-15

With the implementation of a smart metering solution, it is not only possible to acquire consumption data for billing but also to acquire relevant data of the distribution grid for grid operation. There is still a wide gap between the actual condition and the target condition. Synergies result from the use of a common infrastructure which takes account both of the requirements of smart metering and of grid operation. An open architecture also enables the future integration of further applications of the fields of smart grid and smart home. (orig.)

Communication challenges and solutions in the smart grid

CERN Document Server

Bouhafs, Fayçal; Merabti, Madjid

2014-01-01

This SpringerBrief discusses the rise of the smart grid from the perspective of computing and communications. It explains how current and next-generation network technology and methodologies help recognize the potential that the smart grid initiative promises.Chapters provide context on the smart grid before exploring specific challenges related to communication control and energy management. Topics include control in heterogeneous power supply, solutions for backhaul and wide area networks, home energy management systems, and technologies for smart energy management systems.Designed for resea

Using Smart City Technology to Make Healthcare Smarter.

Science.gov (United States)

Cook, Diane J; Duncan, Glen; Sprint, Gina; Fritz, Roschelle

2018-04-01

Smart cities use information and communication technologies (ICT) to scale services include utilities and transportation to a growing population. In this article we discuss how smart city ICT can also improve healthcare effectiveness and lower healthcare cost for smart city residents. We survey current literature and introduce original research to offer an overview of how smart city infrastructure supports strategic healthcare using both mobile and ambient sensors combined with machine learning. Finally, we consider challenges that will be faced as healthcare providers make use of these opportunities.

The regulation of smart grids. Towards smarter, more functional or in particular more complex regulations?; De regulering van smart grids. Naar slimmere, functionelere of vooral complexere regelgeving?

Energy Technology Data Exchange (ETDEWEB)

Vedder, H.H.B. [Groningen Centre of Energy Law, Rijksuniversiteit Groningen, Groningen (Netherlands)

2011-08-15

In current energy regulation, legal aspects of smart grids and smart meters seemed to be limited to the protection of the privacy of the energy users in the mandatory rollout of the smart meter. The current status of the implementation is that the small-scale rollout will start on 1 January 2012. According to the author, the current regulatory framework is insufficient for actual implementation of a smart grid. According to him it is possible to mark a testing ground smart grid as a closed distribution system as is to be implemented according to the Electricity Directive 2009/72. [Dutch] Binnen de huidige energieregulering leken de juridische aspecten van smart grids en slimme meters geruime tijd beperkt tot de bescherming van de privacy van de energiegebruikers bij de verplichte uitrol van de slimme meter. De huidige stand van de implementatie is dat de kleinschalige uitrol start per 1 januari 2012. Er zijn echter meer juridische aspecten dan dat. Volgens de auteur is het huidige regulerende kader ontoereikend voor een daadwerkelijke implementatie van een smart grid. Volgens hem is het mogelijk een proeftuin smart grid aan te merken als gesloten distributiesysteem, zoals dat in gevolge de Elektriciteitsrichtlijn 2009/72 zal worden geimplementeerd.

Multiple Energy System Analysis of Smart Energy Systems

DEFF Research Database (Denmark)

Thellufsen, Jakob Zinck

2015-01-01

thermal grids and smart gas grids, Smart Energy Systems moves the flexibility away from the fuel as is the case in current energy systems and into the system itself. However, most studies applying a Smart Energy System approach deals with analyses for either single countries or whole continents......To eliminate the use of fossil fuels in the energy sector it is necessary to transition to future 100% renewable energy systems. One approach for this radical change in our energy systems is Smart Energy Systems. With a focus on development and interaction between smart electricity grids, smart......, but it is unclear how regions, municipalities, and communities should deal with these national targets. It is necessary to be able to provide this information since Smart Energy Systems utilize energy resources and initiatives that have strong relations to local authorities and communities, such as onshore wind...

Preparing for smart grid technologies: A behavioral decision research approach to understanding consumer expectations about smart meters

International Nuclear Information System (INIS)

Krishnamurti, Tamar; Schwartz, Daniel; Davis, Alexander; Fischhoff, Baruch; Bruine de Bruin, Wändi; Lave, Lester; Wang, Jack

2012-01-01

With the enactment of the 2009 American Recovery and Reinvestment Act, U.S. President Obama made a public commitment to a new approach to energy production and transmission in the United States. It features installing smart meters and related technologies in residential homes, as part of transforming the current electrical grid into a “smart grid.” Realizing this transformation requires consumers to accept these new technologies and take advantage of the opportunities that they create. We use methods from behavioral decision research to understand consumer beliefs about smart meters, including in-depth mental models interviews and a follow-up survey with a sample of potential smart meter customers of a major U.S. mid-Atlantic electricity utility. In both the surveys and the interviews, most respondents reported wanting smart meters. However, these preferences were often based on erroneous beliefs regarding their purpose and function. Respondents confused smart meters with in-home displays and other enabling technologies, while expecting to realize immediate savings. They also perceived risks, including less control over their electricity usage, violations of their privacy, and increased costs. We discuss the policy implications of our results. - Highlights: ► We outline normative risks and benefits of smart meters from scientific literature. ► We examine consumer perceptions of smart meters via interviews and surveys. ► Smart meter desire stems from consumer misconceptions about purpose and function. ► Appropriate communications may prevent consumer protests against the smart grid.

On reliable discovery of molecular signatures

Directory of Open Access Journals (Sweden)

Björkegren Johan

2009-01-01

Full Text Available Abstract Background Molecular signatures are sets of genes, proteins, genetic variants or other variables that can be used as markers for a particular phenotype. Reliable signature discovery methods could yield valuable insight into cell biology and mechanisms of human disease. However, it is currently not clear how to control error rates such as the false discovery rate (FDR in signature discovery. Moreover, signatures for cancer gene expression have been shown to be unstable, that is, difficult to replicate in independent studies, casting doubts on their reliability. Results We demonstrate that with modern prediction methods, signatures that yield accurate predictions may still have a high FDR. Further, we show that even signatures with low FDR may fail to replicate in independent studies due to limited statistical power. Thus, neither stability nor predictive accuracy are relevant when FDR control is the primary goal. We therefore develop a general statistical hypothesis testing framework that for the first time provides FDR control for signature discovery. Our method is demonstrated to be correct in simulation studies. When applied to five cancer data sets, the method was able to discover molecular signatures with 5% FDR in three cases, while two data sets yielded no significant findings. Conclusion Our approach enables reliable discovery of molecular signatures from genome-wide data with current sample sizes. The statistical framework developed herein is potentially applicable to a wide range of prediction problems in bioinformatics.

Impedance-Based Pre-Stress Monitoring of Rock Bolts Using a Piezoceramic-Based Smart Washer—A Feasibility Study

Science.gov (United States)

Wang, Bo; Huo, Linsheng; Chen, Dongdong; Li, Weijie; Song, Gangbing

2017-01-01

Pre-stress degradation or looseness of rock bolts in mining or tunnel engineering threatens the stability and reliability of the structures. In this paper, an innovative piezoelectric device named a “smart washer” with the impedance method is proposed with the aim of developing a real-time device to monitor the pre-stress level of rock bolts. The proposed method was verified through tests on a rock bolt specimen. By applying high-frequency sweep excitations (typically >30 kHz) to the smart washer that was installed on the rock bolt specimen, we observed that the variation in impedance signatures indicated the rock bolt pre-stress status. With the degradation of rock bolt pre-stress, the frequency in the dominating peak of the real part of the electrical impedance signature increased. To quantify the effectiveness of the proposed technique, a normalized root mean square deviation (RMSD) index was developed to evaluate the degradation level of the rock bolt pre-stress. The experimental results demonstrated that the normalized RMSD-based looseness index, which was computed from the impedance value detected by the “smart washer”, increased with loss of the pre-stress of the rock bolt. Therefore, the proposed method can effectively detect the degradation of rock bolt pre-stress, as demonstrated by experiments. PMID:28134811

How to engage end-users in smart energy behaviour?

Directory of Open Access Journals (Sweden)

Valkering Pieter

2014-01-01

Full Text Available End users will play a crucial role in up-coming smart grids that aim to link end-users and energy providers in a better balanced and more efficient electricity system. Within this context, this paper aims to deliver a coherent view on current good practice in end-user engagement in smart grid projects. It draws from a recent review of theoretical insights from sustainable consumption behaviour, social marketing and innovation systems and empirical insights from recent smart grid projects to create an inventory of common motivators, enablers and barriers of behavioural change, and the end-user engagement principles that can be derived from that. We conclude with identifying current research challenges as input for a research agenda on end-user engagement in smart grids.

A study of malware detection on smart mobile devices

Science.gov (United States)

Yu, Wei; Zhang, Hanlin; Xu, Guobin

2013-05-01

The growing in use of smart mobile devices for everyday applications has stimulated the spread of mobile malware, especially on popular mobile platforms. As a consequence, malware detection becomes ever more critical in sustaining the mobile market and providing a better user experience. In this paper, we review the existing malware and detection schemes. Using real-world malware samples with known signatures, we evaluate four popular commercial anti-virus tools and our data shows that these tools can achieve high detection accuracy. To deal with the new malware with unknown signatures, we study the anomaly based detection using decision tree algorithm. We evaluate the effectiveness of our detection scheme using malware and legitimate software samples. Our data shows that the detection scheme using decision tree can achieve a detection rate up to 90% and a false positive rate as low as 10%.

Fiber-wireless for smart grid: A survey

Science.gov (United States)

Radzi, NAM; Ridwan, MA; Din, NM; Abdullah, F.; Mustafa, IS; l-Mansoori, MH

2017-11-01

Smart grid allows two-way communication between power utility companies and their customers while having the ability to sense along the transmission lines. However, the downside is such, when the smart devices are transmitting data simultaneously, it results in network congestion. Fiber wireless (FiWi) network is one of the best congestion solutions for smart grid up to date. In this paper, a survey of current literature on FiWi for smart grid will be reviewed and a testbed to test the protocols and algorithms for FiWi in smart grid will be proposed. The results of number of packets received and delay vs packet transmitted obtained via the testbed are compared with the results obtained via simulation and they show that they are in line with each other, validating the accuracy of the testbed.

Overview Smart Hotel di Indonesia yang Merupakan Trend Baru dalam Industri Perhotelan

OpenAIRE

Maria Pia Adiati

2011-01-01

Nowadays we can find out many taglines featuring the word Smart Hotel or Smart Traveler. Smart traveler is those who travel in a smart way. We called it smart because they choose the accomodation and the transportation wisely, in accordance with requirements and budget. Meanwhile Smart Hotel tagline comes up since there are many smart travelers who travel a lot to the cities around the world. Smart Hotels are hotels who try to accommodate the current market demands. The latest trend for the t...

SMART performance analysis methodology

International Nuclear Information System (INIS)

Lim, H. S.; Kim, H. C.; Lee, D. J.

2001-04-01

To ensure the required and desired operation over the plant lifetime, the performance analysis for the SMART NSSS design is done by means of the specified analysis methodologies for the performance related design basis events(PRDBE). The PRDBE is an occurrence(event) that shall be accommodated in the design of the plant and whose consequence would be no more severe than normal service effects of the plant equipment. The performance analysis methodology which systematizes the methods and procedures to analyze the PRDBEs is as follows. Based on the operation mode suitable to the characteristics of the SMART NSSS, the corresponding PRDBEs and allowable range of process parameters for these events are deduced. With the developed control logic for each operation mode, the system thermalhydraulics are analyzed for the chosen PRDBEs using the system analysis code. Particularly, because of different system characteristics of SMART from the existing commercial nuclear power plants, the operation mode, PRDBEs, control logic, and analysis code should be consistent with the SMART design. This report presents the categories of the PRDBEs chosen based on each operation mode and the transition among these and the acceptance criteria for each PRDBE. It also includes the analysis methods and procedures for each PRDBE and the concept of the control logic for each operation mode. Therefore this report in which the overall details for SMART performance analysis are specified based on the current SMART design, would be utilized as a guide for the detailed performance analysis

Global Inventory and Analysis of Smart Grid Demonstration Projects

Energy Technology Data Exchange (ETDEWEB)

Mulder, W.; Kumpavat, K.; Faasen, C.; Verheij, F.; Vaessen, P [DNV KEMA Energy and Sustainability, Arnhem (Netherlands)

2012-10-15

As the key enabler of a more sustainable, economical and reliable energy system, the development of smart grids has received a great deal of attention in recent times. In many countries around the world the benefits of such a system have begun to be investigated through a number of demonstration projects. With such a vast array of projects it can be difficult to keep track of changes, and to understand which best practices are currently available with regard to smart grids. This report aims to address these issues through providing a comprehensive outlook on the current status of smart grid projects worldwide.

Performance inspection of smart superconducting fault current controller in radial distribution substation through PSCAD/EMTDC simulation

Energy Technology Data Exchange (ETDEWEB)

MassoudiFarid, Mehrdad; Shin, Jae Woong; Lee, Ji Ho; Ko, Tae Kuk [Yonsei University, Seoul (Korea, Republic of)

2013-12-15

In power grid, in order to level out the generation with demand, up-gradation of the system is occasionally required. This will lead to more fault current levels. However, upgrading all the protection instruments of the system is both costly and extravagant. This issue could be dominated by using Smart Fault Current Controller (SFCC). While the impact of Fault current Limiters (FCL) in various locations has been studied in different situations for years, the performance of SFCC has not been investigated extensively. In this research, SFCC which has adopted the characteristics of a full bridge thyristor rectifier with a superconducting coil is applied to three main locations such as load feeder, Bus-tie position and main feeder location and its behavior is investigated through simulation in presence and absence of small Distributed Generation unit (DG). The results show a huge difference in limiting the fault current when using SFCC.

Modeling and managing urban water demand through smart meters: Benefits and challenges from current research and emerging trends

Science.gov (United States)

Cominola, A.; Giuliani, M.; Castelletti, A.; Piga, D.; Rizzoli, A. E.

2015-12-01

Urban population growth, climate and land use change are expected to boost residential water demand in urban contexts in the next decades. In such a context, developing suitable demand-side management strategies is essential to meet future water demands, pursue water savings, and reduce the costs for water utilities. Yet, the effectiveness of water demand management strategies (WDMS) relies on our understanding of water consumers' behavior, their consumption habits, and the water use drivers. While low spatial and temporal resolution water consumption data, as traditionally gathered for billing purposes, hardly support this understanding, the advent of high-resolution, smart metering technologies allowed for quasi real-time monitoring water consumption at the single household level. This, in turn, is advancing our ability in characterizing consumers' behavior, modeling, and designing user-oriented residential water demand management strategies. Several water smart metering programs have been rolled-out in the last two decades worldwide, addressing one or more of the following water demand management phases: (i) data gathering, (ii) water end-uses characterization, (iii) user modeling, (iv) design and implementation of personalized WDMS. Moreover, the number of research studies in this domain is quickly increasing and big economic investments are currently being devoted worldwide to smart metering programs. With this work, we contribute the first comprehensive review of more than 100 experiences in the field of residential water demand modeling and management, and we propose a general framework for their classification. We revise consolidated practices, identify emerging trends and highlight the challenges and opportunities for future developments given by the use of smart meters advancing residential water demand management. Our analysis of the status quo of smart urban water demand management research and market constitutes a structured collection of information

The regulation of smart grids. Towards smarter, more functional or in particular more complex regulations?

International Nuclear Information System (INIS)

Vedder, H.H.B.

2011-01-01

In current energy regulation, legal aspects of smart grids and smart meters seemed to be limited to the protection of the privacy of the energy users in the mandatory rollout of the smart meter. The current status of the implementation is that the small-scale rollout will start on 1 January 2012. According to the author, the current regulatory framework is insufficient for actual implementation of a smart grid. According to him it is possible to mark a testing ground smart grid as a closed distribution system as is to be implemented according to the Electricity Directive 2009/72. [nl

Moving Towards Sustainable and Resilient Smart Water Grids

Directory of Open Access Journals (Sweden)

Michele Mutchek

2014-03-01

Full Text Available Urban water systems face sustainability and resiliency challenges including water leaks, over-use, quality issues, and response to drought and natural disasters. Information and communications technology (ICT could help address these challenges through the development of smart water grids that network and automate monitoring and control devices. While progress is being made on technology elements, as a system, the smart water grid has received scant attention. This article aims to raise awareness of the systems-level idea of smart water grids by reviewing the technology elements and their integration into smart water systems, discussing potential sustainability and resiliency benefits, and challenges relating to the adoption of smart water grids. Water losses and inefficient use stand out as promising areas for applications of smart water grids. Potential barriers to the adoption of smart water grids include lack of funding for research and development, economic disincentives as well as institutional and political structures that favor the current system. It is our hope that future work can clarify the benefits of smart water grids and address challenges to their further development.

Smart Electric Vehicle Charging Infrastructure Overview

Energy Technology Data Exchange (ETDEWEB)

Chynoweth, Joshua; Chung, Ching-Yen; Qiu, Charlie; Chu, Peter; Gadh, Rajit

2014-02-19

WINSmartEV™ is a smart electric vehicle charging system that has been built and is currently in operation. It is a software and network based EV charging system designed and built around the ideas of intelligent charge scheduling, multiplexing (connecting multiple vehicles to each circuit) and flexibility. This paper gives an overview of this smart charging system with an eye toward its unique features and capabilities.

Urban Automation Networks: Current and Emerging Solutions for Sensed Data Collection and Actuation in Smart Cities.

Science.gov (United States)

Gomez, Carles; Paradells, Josep

2015-09-10

Urban Automation Networks (UANs) are being deployed worldwide in order to enable Smart City applications. Given the crucial role of UANs, as well as their diversity, it is critically important to assess their properties and trade-offs. This article introduces the requirements and challenges for UANs, characterizes the main current and emerging UAN paradigms, provides guidelines for their design and/or choice, and comparatively examines their performance in terms of a variety of parameters including coverage, power consumption, latency, standardization status and economic cost.

Urban Automation Networks: Current and Emerging Solutions for Sensed Data Collection and Actuation in Smart Cities

Directory of Open Access Journals (Sweden)

Carles Gomez

2015-09-01

Full Text Available Urban Automation Networks (UANs are being deployed worldwide in order to enable Smart City applications. Given the crucial role of UANs, as well as their diversity, it is critically important to assess their properties and trade-offs. This article introduces the requirements and challenges for UANs, characterizes the main current and emerging UAN paradigms, provides guidelines for their design and/or choice, and comparatively examines their performance in terms of a variety of parameters including coverage, power consumption, latency, standardization status and economic cost.

Smart electric grids in the United Kingdom energy strategy

International Nuclear Information System (INIS)

Gloaguen, Olivier; Dreyfus, Charles-Antoine

2011-09-01

This study first gives an overview of the current status and limitations of the British power grid. It indicates the British energy mix, describes the network structure and its economic operation (gross and retail market with the bid and offer system, role of the System Operator, ways to increase the electricity production). It presents the energy policy and its regulation framework, outlines the current limitations and challenges (ageing grid, power crunch, de-carbonation challenges). It presents the development of a smart grid as a solution to economy de-carbonation challenges: definition of the 'smart grid concept', smart grid development planning (from 2010 to 2050), technological transition associated with smart electric grid development (a cleaner but more intermittent and random electricity production, better use of fossil fuels, electric energy storage, consequences for the grid, introduction and effects of smart meters). It describes the new associated economic model: evolution of the value chain, financial challenges (required investments, expected benefits, subsidies), new regulation system. It addresses the strategic challenges and the various uncertainties (notably in terms of consumption, privacy issue in relation with the use of smart meters, and project implementation).

A group signature scheme based on quantum teleportation

International Nuclear Information System (INIS)

Wen Xiaojun; Tian Yuan; Ji Liping; Niu Xiamu

2010-01-01

In this paper, we present a group signature scheme using quantum teleportation. Different from classical group signature and current quantum signature schemes, which could only deliver either group signature or unconditional security, our scheme guarantees both by adopting quantum key preparation, quantum encryption algorithm and quantum teleportation. Security analysis proved that our scheme has the characteristics of group signature, non-counterfeit, non-disavowal, blindness and traceability. Our quantum group signature scheme has a foreseeable application in the e-payment system, e-government, e-business, etc.

A group signature scheme based on quantum teleportation

Energy Technology Data Exchange (ETDEWEB)

Wen Xiaojun; Tian Yuan; Ji Liping; Niu Xiamu, E-mail: wxjun36@gmail.co [Information Countermeasure Technique Research Institute, Harbin Institute of Technology, Harbin 150001 (China)

2010-05-01

In this paper, we present a group signature scheme using quantum teleportation. Different from classical group signature and current quantum signature schemes, which could only deliver either group signature or unconditional security, our scheme guarantees both by adopting quantum key preparation, quantum encryption algorithm and quantum teleportation. Security analysis proved that our scheme has the characteristics of group signature, non-counterfeit, non-disavowal, blindness and traceability. Our quantum group signature scheme has a foreseeable application in the e-payment system, e-government, e-business, etc.

Vehicle recognition by using acoustic signature and classic DSP techniques

Directory of Open Access Journals (Sweden)

María Fernanda Díaz Velásquez

2016-06-01

Full Text Available This paper shows the application of the classic technique of digital signal processing (DSP, the cross-correlation, used for the detection of acoustic signatures of road traffic in Cali city, Colombia. Future goal is to build a detection software that through real time measures allows us estimate the levels of acoustic pollution in the city by using simulation models of road traffic, in the framework of environmentally-friendly smart cities. Final results of the experimental tests showed an accuracy of 71.43% for specific vehicle detection.

Development of Smart Optical Gels with Highly Magnetically Responsive Bicelles.

Science.gov (United States)

Isabettini, Stéphane; Stucki, Sandro; Massabni, Sarah; Baumgartner, Mirjam E; Reckey, Pernille Q; Kohlbrecher, Joachim; Ishikawa, Takashi; Windhab, Erich J; Fischer, Peter; Kuster, Simon

2018-03-14

Hydrogels delivering on-demand tailorable optical properties are formidable smart materials with promising perspectives in numerous fields, including the development of modern sensors and switches, the essential quality criterion being a defined and readily measured response to environmental changes. Lanthanide ion (Ln 3+ )-chelating bicelles are interesting building blocks for such materials because of their magnetic responsive nature. Imbedding these phospholipid-based nanodiscs in a magnetically aligned state in gelatin permits an orientation-dependent retardation of polarized light. The resulting tailorable anisotropy gives the gel a well-defined optical signature observed as a birefringence signal. These phenomena were only reported for a single bicelle-gelatin pair and required high magnetic field strengths of 8 T. Herein, we demonstrate the versatility and enhance the viability of this technology with a new generation of aminocholesterol (Chol-NH 2 )-doped bicelles imbedded in two different types of gelatin. The highly magnetically responsive nature of the bicelles allowed to gel the anisotropy at commercially viable magnetic field strengths between 1 and 3 T. Thermoreversible gels with a unique optical signature were generated by exposing the system to various temperature conditions and external magnetic field strengths. The resulting optical properties were a signature of the gel's environmental history, effectively acting as a sensor. Solutions containing the bicelles simultaneously aligning parallel and perpendicular to the magnetic field directions were obtained by mixing samples chelating Tm 3+ and Dy 3+ . These systems were successfully gelled, providing a material with two distinct temperature-dependent optical characteristics. The high degree of tunability in the magnetic response of the bicelles enables encryption of the gel's optical properties. The proposed gels are viable candidates for temperature tracking of sensitive goods and provide

Ten questions concerning integrating smart buildings into the smart grid

Energy Technology Data Exchange (ETDEWEB)

Lawrence, Thomas M.; Boudreau, Marie-Claude; Helsen, Lieve; Henze, Gregor; Mohammadpour, Javad; Noonan, Doug; Patteeuw, Dieter; Pless, Shanti; Watson, Richard T.

2016-11-01

Recent advances in information and communications technology (ICT) have initiated development of a smart electrical grid and smart buildings. Buildings consume a large portion of the total electricity production worldwide, and to fully develop a smart grid they must be integrated with that grid. Buildings can now be 'prosumers' on the grid (both producers and consumers), and the continued growth of distributed renewable energy generation is raising new challenges in terms of grid stability over various time scales. Buildings can contribute to grid stability by managing their overall electrical demand in response to current conditions. Facility managers must balance demand response requests by grid operators with energy needed to maintain smooth building operations. For example, maintaining thermal comfort within an occupied building requires energy and, thus an optimized solution balancing energy use with indoor environmental quality (adequate thermal comfort, lighting, etc.) is needed. Successful integration of buildings and their systems with the grid also requires interoperable data exchange. However, the adoption and integration of newer control and communication technologies into buildings can be problematic with older legacy HVAC and building control systems. Public policy and economic structures have not kept up with the technical developments that have given rise to the budding smart grid, and further developments are needed in both technical and non-technical areas.

An overview of smart card technology and markets

OpenAIRE

Mark Furletti

2002-01-01

As part of the Payment Cards Center's series of discussion papers, this paper provides an overview of smart card technology and its potential for significantly increasing payment card functionality. In addition to reviewing the current market for smart cards in the U.S., this paper examines the costs and barriers associated with their wide spread adoption. European and US smart card acceptance is compared. In addition, this paper provides background on the technological and infrastructure dev...

Integrating the Smart Home into the Digital Calendar

OpenAIRE

Mennicken, Sarah; Kim, David; Huang, Elaine May

2016-01-01

With the growing adoption of smart home technologies, inhabitants are faced with the challenge of making sense of the data that their homes can collect to configure automated behaviors that benefit their routines. Current commercial smart home interfaces usually provide information on individual devices instead of a more comprehensive overview of a home’s behavior. To reduce the complexity of smart home data and integrate it better into inhabitants’ lives, we turned to the familiar metaphor o...

Smart learning services based on smart cloud computing.

Science.gov (United States)

Kim, Svetlana; Song, Su-Mi; Yoon, Yong-Ik

2011-01-01

Context-aware technologies can make e-learning services smarter and more efficient since context-aware services are based on the user's behavior. To add those technologies into existing e-learning services, a service architecture model is needed to transform the existing e-learning environment, which is situation-aware, into the environment that understands context as well. The context-awareness in e-learning may include the awareness of user profile and terminal context. In this paper, we propose a new notion of service that provides context-awareness to smart learning content in a cloud computing environment. We suggest the elastic four smarts (E4S)--smart pull, smart prospect, smart content, and smart push--concept to the cloud services so smart learning services are possible. The E4S focuses on meeting the users' needs by collecting and analyzing users' behavior, prospecting future services, building corresponding contents, and delivering the contents through cloud computing environment. Users' behavior can be collected through mobile devices such as smart phones that have built-in sensors. As results, the proposed smart e-learning model in cloud computing environment provides personalized and customized learning services to its users.

Smart Learning Services Based on Smart Cloud Computing

Directory of Open Access Journals (Sweden)

Yong-Ik Yoon

2011-08-01

Full Text Available Context-aware technologies can make e-learning services smarter and more efficient since context-aware services are based on the user’s behavior. To add those technologies into existing e-learning services, a service architecture model is needed to transform the existing e-learning environment, which is situation-aware, into the environment that understands context as well. The context-awareness in e-learning may include the awareness of user profile and terminal context. In this paper, we propose a new notion of service that provides context-awareness to smart learning content in a cloud computing environment. We suggest the elastic four smarts (E4S—smart pull, smart prospect, smart content, and smart push—concept to the cloud services so smart learning services are possible. The E4S focuses on meeting the users’ needs by collecting and analyzing users’ behavior, prospecting future services, building corresponding contents, and delivering the contents through cloud computing environment. Users’ behavior can be collected through mobile devices such as smart phones that have built-in sensors. As results, the proposed smart e-learning model in cloud computing environment provides personalized and customized learning services to its users.

Named data networking-based smart home

Directory of Open Access Journals (Sweden)

Syed Hassan Ahmed

2016-09-01

Full Text Available Named data networking (NDN treats content/data as a “first class citizen” of the network by giving it a “name”. This content “name” is used to retrieve any information, unlike in device-centric networks (i.e., the current Internet, which depend on physical IP addresses. Meanwhile, the smart home concept has been gaining attention in academia and industries; various low-cost embedded devices are considered that can sense, process, store, and communicate data autonomously. In this paper, we study NDN in the context of smart-home communications, discuss the preliminary evaluations, and describe the future challenges of applying NDN in smart-home applications.

Smart Grid Communications System Blueprint

Science.gov (United States)

Clark, Adrian; Pavlovski, Chris

2010-10-01

Telecommunications operators are well versed in deploying 2G and 3G wireless networks. These networks presently support the mobile business user and/or retail consumer wishing to place conventional voice calls and data connections. The electrical power industry has recently commenced transformation of its distribution networks by deploying smart monitoring and control devices throughout their networks. This evolution of the network into a `smart grid' has also motivated the need to deploy wireless technologies that bridge the communication gap between the smart devices and information technology systems. The requirements of these networks differ from traditional wireless networks that communications operators have deployed, which have thus far forced energy companies to consider deploying their own wireless networks. We present our experience in deploying wireless networks to support the smart grid and highlight the key properties of these networks. These characteristics include application awareness, support for large numbers of simultaneous cell connections, high service coverage and prioritized routing of data. We also outline our target blueprint architecture that may be useful to the industry in building wireless and fixed networks to support the smart grid. By observing our experiences, telecommunications operators and equipment manufacturers will be able to augment their current networks and products in a way that accommodates the needs of the emerging industry of smart grids and intelligent electrical networks.

Smarter energy from smart metering to the smart grid

CERN Document Server

Sun, Hongjian; Poor, H Vincent; Carpanini, Laurence; Fornié, Miguel Angel Sánchez

2016-01-01

This book presents cutting-edge perspectives and research results in smart energy spanning multiple disciplines across four main topics: smart metering, smart grid modeling, control and optimisation, and smart grid communications and networking.

Improving reservoir performance using new 'smart' well technology

International Nuclear Information System (INIS)

Roggensack, W.D.; Matthews, C.M.

1997-01-01

The technologies that were available in the past to improve reservoir performance include 3-D seismic, coiled tubing, horizontal wells, and PCP's. Future enabling technologies will also include multi-lateral wells, 'smart' wells, underbalanced drilling, and downhole fluids processing. A description of 'smart' well technology was given, defined as well completions which facilitate downhole monitoring and control of production to achieve maximum reserves recovery. The current development for 'smart' wells is focused on offshore and subsea wells for marginal field development and work-over mitigation, with the emphasis in system design for production control of horizontal and multi-lateral wells. Basic 'smart' well configuration, instrumentation and monitoring systems, applications of 'smart' well technology in the Western Canadian Sedimentary Basin, and future developments and applications for the technology in general, were also discussed. 30 figs

Blockchain-based Smart Contracts: A Systematic Mapping Study

OpenAIRE

Alharby, Maher; van Moorsel, Aad

2017-01-01

An appealing feature of blockchain technology is smart contracts. A smart contract is executable code that runs on top of the blockchain to facilitate, execute and enforce an agreement between untrusted parties without the involvement of a trusted third party. In this paper, we conduct a systematic mapping study to collect all research that is relevant to smart contracts from a technical perspective. The aim of doing so is to identify current research topics and open challenges for future stu...

Challenging 'smart' in smart city strategies

DEFF Research Database (Denmark)

Sandvik, Kjetil; Knudsen, Jacob

and development. Focusing on processes of citizen participation and co-creation as the main driving force, we introduce a concept of 'smart city at eye level'. The introduction of new media technology and new media uses need to emerge from a profound understanding of the wants, needs and abilities of the citizens......Smart city strategies concern the improvement of economic and political efficiency and the enabling of social, cultural and urban development (Hollands 2008) and covers a variety of fields from improving infrastructures, social and cultural development, resilience strategies (e.g. green energy......), improving schools, social welfare institutions, public and private institutions etc. The 'smart' in smart city strategies implies that these efforts are accomplished by the introduction and embedding of smart media technology into the very fabric of society. This is often done in a top-down and technology...

The adoption of new smart-grid technologies incentives, outcomes, and opportunities

CERN Document Server

Guo, Christopher; Narayanan, Anu

2015-01-01

RAND Corporation researchers review the current technical, regulatory, and economic context of the electricity market and theoretical benefits of developing a smart grid; discuss some entrepreneurial opportunities associated with smart-grid data; examine empirical evidence related to smart-grid adoption and implementation; and offer policy suggestions for overcoming identified barriers.

Smart meter status report from Toronto

International Nuclear Information System (INIS)

O'Brien, D.

2006-01-01

An update of Toronto Hydro's smart metering program was presented. Electricity demand is expected to keep increasing, and there is presently insufficient generation to match supply needs in Ontario. The smart metering program was introduced to aid in the Ontario government's energy conservation strategy, as well as to address peak supply problems that have led to power outages. It is expected that the smart metering program will reduce provincial peak supply by 5 per cent, as the meters support both time-of-use rates and critical peak pricing. Over 800,000 smart meters will be supplied to customers by 2007, and all 4.3 million homes in Toronto will have a smart meter by 2010. In order to meet targets for 2010, the utility will continue to install more 15,000 meters each month for the next 4 years. While the Ontario government has planned and coordinated the rollout and developed smart metering specifications and standards, Toronto Hydro is responsible for the purchase, installation, operation and maintenance of the meters. Advance testing of each meter is needed to ensure billing accuracy, and customer education on meter use is also. The complexity of the metering program has led the utility to establish a rigid project management process. Customer education pilot program are currently being conducted. Experience gained during the earlier phases of the program have enabled the utility to select appropriate metering systems based on density, topography and physical conditions. Project expenditures have been within budget due to improved project estimating and planning. The metering program has been conducted in tandem with the utility's peakSAVER program, a residential and small commercial load control program that has been successful in reducing summer peak demand by cycling air conditioners without causing discomfort. It was concluded that the utility will continue with its mass deployment of smart meters, and is currently preparing its call center to handled

Realisering af Smart City/Smart House i Nordjylland

DEFF Research Database (Denmark)

Lindgren, Peter; Saghaug, Kristin Margrethe

2008-01-01

beskriver tankerne, visionerne og perspektiverne i forhold til at realisere Smart House-konceptet i Region Nordjylland. Smart House-tankerne er baseret på at bygge smarte huse og smarte byggekomponenter til fremtidens brugere, hvor den nyeste teknologi indenfor byggematerialer kombineres med nye værdier....... Formålet med Smart House Nordjylland er at flytte byggeindustriens og forskernes fokus fra en indbyrdes konkurrence lokalt til et udviklende innovationssamarbejde, som sigter mod det globale marked. På denne måde kan regionen skabe et udstillingsvindue indenfor fremtidens byggeri gennem en interaktion...

A Development Framework for Smart Cities Assessment

Directory of Open Access Journals (Sweden)

Mustafa Khudhair Al-Alwani

2018-02-01

Full Text Available A smart city is rising as an approach and strategy to reduce the troubles produced by rapid urbanization and the growth of urban population. Although, cities continue to develop and purify their social, economic and environmental goals along with the strategies to achieve them, this phenomenon has been discussed by little research yet. However, due to the requiring immediate action or attention for practical application of the principles of smart cities, city authorities, stakeholders and local communities need to know the current reality of their city and where development is being attained in their systems. Therefore, constructing a framework for smart cities assessment will help share or exchange the newcomer strong and weak points, and emphasize where actual development is taking place and update a plan for future developments. Moreover, this assessment is able to assist cities prioritizes actions. This paper developed a guiding assessment framework for smart cites that will help the creating, carefully choosing and priorities of crucial indicators. These indicators can then show the way to the smart cites performance assessment and monitoring. Drawing on the investigation of an extensive and wide collection of literature from a variety of disciplinary areas and based on the conceptual literature on smart cities, in addition to interviews this study identify a good tool to help recognizing of virtual achievement of smart city. Furthermore, it is significant to be taken into consideration in assessing smart city smartness level.

Smart Grid Security. White Paper

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-09-15

One of the biggest concerns for smart grid developers is cyber security due to the reliance on IT communication networks. While the current grid is not immune to energy theft, fraud and malicious cyber-attacks, the smart grid poses new security issues. It is more likely now that theft, malicious attack and fraud will be committed by people working remotely from a laptop several miles away, even in a different country, than someone physically manipulating meters. This makes it difficult to predict where attacks will come from.

Retail applications of signature verification

Science.gov (United States)

Zimmerman, Thomas G.; Russell, Gregory F.; Heilper, Andre; Smith, Barton A.; Hu, Jianying; Markman, Dmitry; Graham, Jon E.; Drews, Clemens

2004-08-01

The dramatic rise in identity theft, the ever pressing need to provide convenience in checkout services to attract and retain loyal customers, and the growing use of multi-function signature captures devices in the retail sector provides favorable conditions for the deployment of dynamic signature verification (DSV) in retail settings. We report on the development of a DSV system to meet the needs of the retail sector. We currently have a database of approximately 10,000 signatures collected from 600 subjects and forgers. Previous work at IBM on DSV has been merged and extended to achieve robust performance on pen position data available from commercial point of sale hardware, achieving equal error rates on skilled forgeries and authentic signatures of 1.5% to 4%.

Practical quantum digital signature

Science.gov (United States)

Yin, Hua-Lei; Fu, Yao; Chen, Zeng-Bing

2016-03-01

Guaranteeing nonrepudiation, unforgeability as well as transferability of a signature is one of the most vital safeguards in today's e-commerce era. Based on fundamental laws of quantum physics, quantum digital signature (QDS) aims to provide information-theoretic security for this cryptographic task. However, up to date, the previously proposed QDS protocols are impractical due to various challenging problems and most importantly, the requirement of authenticated (secure) quantum channels between participants. Here, we present the first quantum digital signature protocol that removes the assumption of authenticated quantum channels while remaining secure against the collective attacks. Besides, our QDS protocol can be practically implemented over more than 100 km under current mature technology as used in quantum key distribution.

On the domestic standards for Smart Cities

Directory of Open Access Journals (Sweden)

Dmitry Namiot

2016-07-01

Full Text Available The article discusses the development and use of standards for Smart Cities. This paper considers the current ecosystem of standards in this area, and analyzes the possible development of work in this direction. The article provides the analysis of the works of the British standards Institute, which are quite far advanced in this area. Also provides a critical assessment of the state of affairs in Russia with the standardization in the field of Smart Cities and Internet of Things. In conclusion, the authors offer their vision of development work on Smart City in Russia.

OpenSHS: Open Smart Home Simulator

Directory of Open Access Journals (Sweden)

Nasser Alshammari

2017-05-01

Full Text Available This paper develops a new hybrid, open-source, cross-platform 3D smart home simulator, OpenSHS, for dataset generation. OpenSHS offers an opportunity for researchers in the field of the Internet of Things (IoT and machine learning to test and evaluate their models. Following a hybrid approach, OpenSHS combines advantages from both interactive and model-based approaches. This approach reduces the time and efforts required to generate simulated smart home datasets. We have designed a replication algorithm for extending and expanding a dataset. A small sample dataset produced, by OpenSHS, can be extended without affecting the logical order of the events. The replication provides a solution for generating large representative smart home datasets. We have built an extensible library of smart devices that facilitates the simulation of current and future smart home environments. Our tool divides the dataset generation process into three distinct phases: first design: the researcher designs the initial virtual environment by building the home, importing smart devices and creating contexts; second, simulation: the participant simulates his/her context-specific events; and third, aggregation: the researcher applies the replication algorithm to generate the final dataset. We conducted a study to assess the ease of use of our tool on the System Usability Scale (SUS.

OpenSHS: Open Smart Home Simulator.

Science.gov (United States)

Alshammari, Nasser; Alshammari, Talal; Sedky, Mohamed; Champion, Justin; Bauer, Carolin

2017-05-02

This paper develops a new hybrid, open-source, cross-platform 3D smart home simulator, OpenSHS, for dataset generation. OpenSHS offers an opportunity for researchers in the field of the Internet of Things (IoT) and machine learning to test and evaluate their models. Following a hybrid approach, OpenSHS combines advantages from both interactive and model-based approaches. This approach reduces the time and efforts required to generate simulated smart home datasets. We have designed a replication algorithm for extending and expanding a dataset. A small sample dataset produced, by OpenSHS, can be extended without affecting the logical order of the events. The replication provides a solution for generating large representative smart home datasets. We have built an extensible library of smart devices that facilitates the simulation of current and future smart home environments. Our tool divides the dataset generation process into three distinct phases: first design: the researcher designs the initial virtual environment by building the home, importing smart devices and creating contexts; second, simulation: the participant simulates his/her context-specific events; and third, aggregation: the researcher applies the replication algorithm to generate the final dataset. We conducted a study to assess the ease of use of our tool on the System Usability Scale (SUS).

Computer Modelling «Smart Building»

Directory of Open Access Journals (Sweden)

O. Yu. Maryasin

2016-01-01

Full Text Available Currently ”Smart building” or ”Smart house” technology is developing actively in industrialized countries. The main idea of ”smart building” or ”smart house” is to have a system which is able to identify definite situations happening in house and respond accordingly. Automated house management system is made for automated control and management and also for organization of interaction between separated systems of engineering equipment. This system includes automation subsystems of one or another engineering equipment as separated components. In order to perform study of different functioning modes of engineering subsystems and the whole system, mathematical and computer modeling needs to be used. From mathematical point of veiw description of ”Smart building” is a continuous-discrete or hybrid system consisting of interacting elements of different nature, whose behavior is described by continuous and discrete processes. In the article the authors present a computer model ”Smart building” which allows to model the work of main engineering subsystems and management algorithms. The model is created in Simulink Matlab system with ”physical modeling” library Simscape and Stateflow library. The peculiarity of this model is the use of specialized management and control algorithms which allow providing coordinated interaction of subsystems and optimizing power consumption. 

Evaluation of 3D printed optofluidic smart glass prototypes.

Science.gov (United States)

Wolfe, Daniel; Goossen, K W

2018-01-22

Smart glass or smart windows are an innovative technology used for thermal management, energy efficiency, and privacy applications. Notable commercially available smart glass relies on an electric stimuli to modulate the glass from a transparent to a translucent mode of operation. However, the current market technologies, such as electrochromic, polymer dispersed liquid crystal, and suspended particle devices are expensive and suffer from solar absorption, poor transmittance modulation, and in some cases, continuous power consumption. The authors of this paper present a novel optofluidic smart glass prototype capable of modulating visible light transmittance from 8% to 85%.

Smart Energy. From the reactive customer administration to a proactive customer management; Smart Energy. Von der reaktiven Kundenverwaltung zum proaktiven Kundenmanagement

Energy Technology Data Exchange (ETDEWEB)

Aichele, Christian

2012-07-01

In view of the current political debate about the phasing out of nuclear power and about the expansion of renewable energy production no one doubts the need for the implementation of smart energy. In particular, the business processes for Smart Energy, the management of information and the necessary information technology are the focus of the book under consideration. The first chapter of this book gives an overview of the energy industry, the electricity market and on the way to smart energy. The major European and German regulations are presented. Other topics covered in this book are: vision of smart energy, basic information process from the reading of the energy consumption to billing, business processes in the liberalized energy sector, the impact of smart meter technology on energy markets and consumers of energy, efficient use of the customer-relation-management in the energy company, use of dynamic tariffs for customer interaction on the Smart Grid.

Signal processing for smart cards

Science.gov (United States)

Quisquater, Jean-Jacques; Samyde, David

2003-06-01

In 1998, Paul Kocher showed that when a smart card computes cryptographic algorithms, for signatures or encryption, its consumption or its radiations leak information. The keys or the secrets hidden in the card can then be recovered using a differential measurement based on the intercorrelation function. A lot of silicon manufacturers use desynchronization countermeasures to defeat power analysis. In this article we detail a new resynchronization technic. This method can be used to facilitate the use of a neural network to do the code recognition. It becomes possible to reverse engineer a software code automatically. Using data and clock separation methods, we show how to optimize the synchronization using signal processing. Then we compare these methods with watermarking methods for 1D and 2D signal. The very last watermarking detection improvements can be applied to signal processing for smart cards with very few modifications. Bayesian processing is one of the best ways to do Differential Power Analysis, and it is possible to extract a PIN code from a smart card in very few samples. So this article shows the need to continue to set up effective countermeasures for cryptographic processors. Although the idea to use advanced signal processing operators has been commonly known for a long time, no publication explains that results can be obtained. The main idea of differential measurement is to use the cross-correlation of two random variables and to repeat consumption measurements on the processor to be analyzed. We use two processors clocked at the same external frequency and computing the same data. The applications of our design are numerous. Two measurements provide the inputs of a central operator. With the most accurate operator we can improve the signal noise ratio, re-synchronize the acquisition clock with the internal one, or remove jitter. The analysis based on consumption or electromagnetic measurements can be improved using our structure. At first sight

A Smart Home Center Platform Solution Based on Smart Mirror

Directory of Open Access Journals (Sweden)

Deng Xibo

2017-01-01

Full Text Available With the popularization of the concept of smart home, people have raised requirements on the experience of smart living. A smart home platform center solution is put forward in order to solve the intelligent interoperability and information integration of smart home, which enable people to have a more intelligent and convenient life experience. This platform center is achieved through the Smart Mirror. The Smart Mirror refers to a smart furniture, on the basis of the traditional concept of mirror, combining Raspberry Pi, the application of one-way mirror imaging principle, the touch－enabled design, voice and video interaction. Smart Mirror can provide a series of intelligent experience for the residents, such as controlling all the intelligent furniture through Smart Mirror; accessing and displaying the weather, time, news and other life information; monitoring the home environment; remote interconnection operation.

Switchable Materials for Smart Windows.

Science.gov (United States)

Wang, Yang; Runnerstrom, Evan L; Milliron, Delia J

2016-06-07

This article reviews the basic principles of and recent developments in electrochromic, photochromic, and thermochromic materials for applications in smart windows. Compared with current static windows, smart windows can dynamically modulate the transmittance of solar irradiation based on weather conditions and personal preferences, thus simultaneously improving building energy efficiency and indoor human comfort. Although some smart windows are commercially available, their widespread implementation has not yet been realized. Recent advances in nanostructured materials provide new opportunities for next-generation smart window technology owing to their unique structure-property relations. Nanomaterials can provide enhanced coloration efficiency, faster switching kinetics, and longer lifetime. In addition, their compatibility with solution processing enables low-cost and high-throughput fabrication. This review also discusses the importance of dual-band modulation of visible and near-infrared (NIR) light, as nearly 50% of solar energy lies in the NIR region. Some latest results show that solution-processable nanostructured systems can selectively modulate the NIR light without affecting the visible transmittance, thus reducing energy consumption by air conditioning, heating, and artificial lighting.

Emerging Themes and Lessons Learned: The First Year of Smart Start.

Science.gov (United States)

Maxwell, Kelly; Bryant, Donna; Adkins, Amee; McCadden, Brian; Noblit, George

Smart Start is North Carolina's partnership between state government and local leaders, service providers, and families to better serve children under 6 years of age and their families. A formative evaluation of the Smart Start process, to inform the current state-level decision-making processes for future Smart Start efforts, was devised from a…

Scientific objectives and selection of targets for the SMART-1 Infrared Spectrometer (SIR)

Science.gov (United States)

Basilevsky, A. T.; Keller, H. U.; Nathues, A.; Mall, U.; Hiesinger, H.; Rosiek, M.

2004-12-01

The European SMART-1 mission to the Moon, primarily a testbed for innovative technologies, was launched in September 2003 and will reach the Moon in 2005. On board are several scientific instruments, including the point-spectrometer SMART-1 Infrared Spectrometer (SIR). Taking into account the capabilities of the SMART-1 mission and the SIR instrument in particular, as well as the open questions in lunar science, a selection of targets for SIR observations has been compiled. SIR can address at least five topics: (1) Surface/regolith processes; (2) Lunar volcanism; (3) Lunar crust structure; (4) Search for spectral signatures of ices at the lunar poles; and (5) Ground truth and study of geometric effects on the spectral shape. For each topic we will discuss specific observation modes, necessary to achieve our scientific goals. The majority of SIR targets will be observed in the nadir-tracking mode. More than 100 targets, which require off-nadir pointing and off-nadir tracking, are planned. It is expected that results of SIR observations will significantly increase our understanding of the Moon. Since the exact arrival date and the orbital parameters of the SMART-1 spacecraft are not known yet, a more detailed planning of the scientific observations will follow in the near future.

The role of households in the smart grid

DEFF Research Database (Denmark)

Christensen, Toke Haunstrup; Ascarza, Ainhoa; Throndsen, William

2013-01-01

these countries in relation to the current electricity system, energy policy plans, smart grid research and demonstration activities. The aim of this is to explore how country-specific factors influence the conceptualisation of households’ role in the future smart grid. The analysis focuses on how, for example......, differences in national plans for future changes on the electricity production side (like integrating more wind power, hydropower etc.) influence smart grid strategies and understandings of the households’ role in the future electricity system. Furthermore, the paper discusses the main challenges......The electricity system is currently facing great changes due to a number of challenges, including the need to mitigate climate change and replace fossil fuels with renewable energy sources. This calls for new solutions at all levels of the electricity system. Households are assigned a key role...

The smart kiosk substation for Smart Grids; Die intelligente Ortsnetzstation fuer das Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Weber, Thomas [Schneider Electric Energy GmbH, Frankfurt (Germany); Vaupel, Steffen [Schneider Electric Energy GmbH, Kassel (Germany)

2012-07-01

The changes in the energy supply towards current and future needs call for new technologies and solutions resulting in the ''Smart Grid''. The smart kiosk substation describes an essential component for the additionally required optimization of the energy distribution networks - a complete functional unit of an economic and efficient compact substation, which successfully operates within the framework of a pilot project since the beginning of this year. In addition to an adjustable 630-kVA-local distribution transformer, control and signalling functions, to manage fault situations are included, allowing for the optimization of outage times. Measurement of network quality and an economic network protection complete the range of services. As is customary during the development of new products, high availability and free of maintenance (through utilization of standard components) whilst complying with current standards and regulations are being taken into account. Along with the demand for regenerative feed-ins to feed reactive power into the network as required, the regulating device allows for a much improved use of the voltage limits - in the low voltage grid as well. It is to be expected that the network expansion of the low voltage grid thus can be significantly optimized through these possibilities of regulation. (orig.)

Smart City and Smart Tourism: A Case of Dubai

Directory of Open Access Journals (Sweden)

M. Sajid Khan

2017-12-01

Full Text Available Over the past decade, the advent of new technology has brought about the emergence of smart cities aiming to provide their stakeholders with technology-based solutions that are effective and efficient. Insofar as the objective of smart cities is to improve outcomes that are connected to people, systems and processes of businesses, government and other public- and private-sector entities, its main goal is to improve the quality of life of all residents. Accordingly, smart tourism has emerged over the past few years as a subset of the smart city concept, aiming to provide tourists with solutions that address specific travel related needs. Dubai is an emerging tourism destination that has implemented smart city and smart tourism platforms to engage various stakeholders. The objective of this study is to identify best practices related to Dubai’s smart city and smart tourism. In so doing, Dubai’s mission and vision along with key dimensions and pillars are identified in relation to the advancements in the literature while highlighting key resources and challenges. A Smart Tourism Dynamic Responsive System (STDRS framework is proposed while suggesting how Dubai may able to enhance users’ involvement and their overall experience.

Smart Sensors Enable Smart Air Conditioning Control

Directory of Open Access Journals (Sweden)

Chin-Chi Cheng

2014-06-01

Full Text Available In this study, mobile phones, wearable devices, temperature and human motion detectors are integrated as smart sensors for enabling smart air conditioning control. Smart sensors obtain feedback, especially occupants’ information, from mobile phones and wearable devices placed on human body. The information can be used to adjust air conditioners in advance according to humans’ intentions, in so-called intention causing control. Experimental results show that the indoor temperature can be controlled accurately with errors of less than ±0.1 °C. Rapid cool down can be achieved within 2 min to the optimized indoor capacity after occupants enter a room. It’s also noted that within two-hour operation the total compressor output of the smart air conditioner is 48.4% less than that of the one using On-Off control. The smart air conditioner with wearable devices could detect the human temperature and activity during sleep to determine the sleeping state and adjusting the sleeping function flexibly. The sleeping function optimized by the smart air conditioner with wearable devices could reduce the energy consumption up to 46.9% and keep the human health. The presented smart air conditioner could provide a comfortable environment and achieve the goals of energy conservation and environmental protection.

Human-Computer Interaction in Smart Environments

Science.gov (United States)

Paravati, Gianluca; Gatteschi, Valentina

2015-01-01

Here, we provide an overview of the content of the Special Issue on “Human-computer interaction in smart environments”. The aim of this Special Issue is to highlight technologies and solutions encompassing the use of mass-market sensors in current and emerging applications for interacting with Smart Environments. Selected papers address this topic by analyzing different interaction modalities, including hand/body gestures, face recognition, gaze/eye tracking, biosignal analysis, speech and activity recognition, and related issues.

The Role of Internet of Things (IoT) in Smart Cities: Technology Roadmap-oriented Approaches

OpenAIRE

Eunil Park; Angel P. del Pobil; Sang Jib Kwon

2018-01-01

Since the concept of a smart city was introduced, IoT (Internet of Things) has beenconsidered the key infrastructure in a smart city. However, there are currently no detailed explanations of the technical contributions of IoT in terms of the management, development, and improvements of smart cities. Therefore, the current study describes the importance of IoT technologies on the technology roadmap (TRM) of a smart city. Moreover, the survey with about 200 experts was conducted to investigate ...

The Role of Internet of Things (IoT in Smart Cities: Technology Roadmap-oriented Approaches

Directory of Open Access Journals (Sweden)

Eunil Park

2018-05-01

Full Text Available Since the concept of a smart city was introduced, IoT (Internet of Things has beenconsidered the key infrastructure in a smart city. However, there are currently no detailed explanations of the technical contributions of IoT in terms of the management, development, and improvements of smart cities. Therefore, the current study describes the importance of IoT technologies on the technology roadmap (TRM of a smart city. Moreover, the survey with about 200 experts was conducted to investigate both the importance and essentiality of detail components of IoT technologies for a smart city. Based on the survey results, the focal points and essential elements for the successful developments of a smart city are presented.

Changing the regulation for regulating the change: Innovation-driven regulatory developments for smart grids, smart metering and e-mobility in Italy

International Nuclear Information System (INIS)

Lo Schiavo, Luca; Delfanti, Maurizio; Fumagalli, Elena; Olivieri, Valeria

2013-01-01

For a long time considered as technologically mature, electric systems are now facing a period of rapid evolution, inspired by climate change concerns. Several studies show that current regulation of natural monopolies does not offer sufficient incentives for network operators (and network users) to participate in this process. Taking Italy as a case study, this paper analyses how energy regulation can change to support the current transformation. We describe the recent regulatory interventions in the domain of smart grids, smart metering and electromobility, with a specific emphasis on the provisions aimed at fostering innovation—an issue that until recently has received almost no attention in the literature nor in the practice of regulation. The progress we observe is considerable in all new areas of concern, and, above all, in the regulator's commitment to provide the right incentives for investments in demonstration projects: the acquisition of experience is regarded as essential to move to more sophisticated regulatory instruments. Finally, regulation is also increasingly concerned with network users, both traditional and new, with the objective to stimulate more active behaviours. - Highlights: ► Regulatory changes in Italy: smart grids, smart metering and electromobility. ► Identification of indicators for regulating innovative investments. ► Demonstration projects for smart grids and EV recharging infrastructures. ► Proposal of an output-based regulation for smart grids. ► Time of Use pricing for residential and small commercial consumers

Smart grid security

Energy Technology Data Exchange (ETDEWEB)

Cuellar, Jorge (ed.) [Siemens AG, Muenchen (Germany). Corporate Technology

2013-11-01

The engineering, deployment and security of the future smart grid will be an enormous project requiring the consensus of many stakeholders with different views on the security and privacy requirements, not to mention methods and solutions. The fragmentation of research agendas and proposed approaches or solutions for securing the future smart grid becomes apparent observing the results from different projects, standards, committees, etc, in different countries. The different approaches and views of the papers in this collection also witness this fragmentation. This book contains the following papers: 1. IT Security Architecture Approaches for Smart Metering and Smart Grid. 2. Smart Grid Information Exchange - Securing the Smart Grid from the Ground. 3. A Tool Set for the Evaluation of Security and Reliability in Smart Grids. 4. A Holistic View of Security and Privacy Issues in Smart Grids. 5. Hardware Security for Device Authentication in the Smart Grid. 6. Maintaining Privacy in Data Rich Demand Response Applications. 7. Data Protection in a Cloud-Enabled Smart Grid. 8. Formal Analysis of a Privacy-Preserving Billing Protocol. 9. Privacy in Smart Metering Ecosystems. 10. Energy rate at home Leveraging ZigBee to Enable Smart Grid in Residential Environment.

Smart business for smart users? : A social science agenda for developing smart grids

NARCIS (Netherlands)

Verbong, G.P.J.; Verkade, N.; Verhees, B.; Huijben, J.C.C.M.; Höffken, J.I.; Beaulieu, A.; de Wilde, J.; Scherpen, J.M.A.

2016-01-01

The promise of smart grids is very attractive. However, it is not yet clear what the future smart grid will look like. Although most researchers acknowledge that users will play a more prominent role in smart grids, there is a lot of uncertainty on this issue. To counter the strong techno-logical

Fair cost distribution among smart homes with microgrid

International Nuclear Information System (INIS)

Zhang, Di; Liu, Songsong; Papageorgiou, Lazaros G.

2014-01-01

Highlights: • Work aims at fair cost distribution among smart homes with microgrid. • An MILP-based approach is adopted based on lexicographic minimax method. • Domestic appliances from multiple smart homes are scheduled. • Results from two illustrative examples indicate fair cost distribution. - Abstract: Microgrid is composed of a set of distributed energy resources (DER) and is considered as an alternative energy providing system to the current centralised energy generation. Smart homes equipped with smart grid technology, such as smart meter and communication system, are becoming popular for their lower energy cost and provision of comfort. Flexible energy-consuming household tasks can be scheduled coordinately among multiple homes which share the common microgrid. When local DERs cannot fulfill the whole demand, smart homes will compete with each other to obtain energy from local DERs and achieve their respective lowest energy cost. In this paper, a mathematical programming formulation is presented for the fair cost distribution among smart homes with microgrid. The proposed model is based on the lexicographic minimax method using a mixed integer linear programming (MILP) approach. One-day forecasted energy cost of each smart home is minimised under fairness concern. DER operation, DER output sharing among smart homes and electricity consumption household tasks are scheduled. Two numerical examples with 10 and 50 smart homes are studied. The computational results illustrate that the proposed approach can obtain obvious cost savings (30% and 24% respectively) and fair cost distribution among multiple homes under given fairness scenario

The Smart Grid in Texas. An investigation for Dutch business opportunities

International Nuclear Information System (INIS)

Van Ooijen, A.; Van Gellecum, P.

2011-12-01

This paper discusses the smart grid industry in the state of Texas, USA. A market scan for Dutch business opportunities is made. Currently, over 8 million smart meters have been installed in 18 smart grid projects in Texas. Its business climate is perceived as friendly and has attracted a lot of investments from the industry and over USD 1 billion from government grants. The deployment of smart meters is done mandatory. With the massive rollout of smart meters Texas has laid a profound foundation of the smart grid infrastructure. Some smart grid projects are mainly focused on the roll-out of smart meters, while others are holistically focused on the reduction of electricity consumption and include the use of solar panels, wind turbines and electric vehicles. The most important opportunities for Dutch business are in the in-home display industry, technologies for safety and security, smart grid applications, consumer involvement, bridging the smart grid to the smart city, deployment knowledge within Texas, and future pilot possibilities. Implications are discussed.

Smart Meter Rollout: Intelligente Messsysteme als Schnittstelle zum Kunden im Smart Grid und Smart Market

Science.gov (United States)

Vortanz, Karsten; Zayer, Peter

Das Gesetz zur Digitalisierung der Energiewende ist verabschiedet. Ab 2017 sind moderne Messeinrichtungen (mME) und intelligente Messsysteme (iMSys) zu verbauen und zu betreiben. Der "deutsche Weg" für die Einführung von Smart Metern sieht einen stufenweisen Rollout sowie ein Höchstmaß an Informations- und Datensicherheit vor. Dabei spielen iMSys und mME eine wichtige Rolle bei der Neugestaltung der intelligenten Netze (Smart Grids) und des neuen Marktmodells (Smart Market). Dieser Beitrag beschäftigt sich mit den neuen Gesetzen, den Marktrollen und ihren Aufgaben, Datenschutz und Datensicherheit, dem iMSys als sichere Lösung, dem sicheren Betrieb von Smart Meter Gateways, Smart Grid - Smart Market, dem Zusammenspiel zwischen reguliertem Bereich und Markt, den Einsatzbereichen der iMSys sowie den Auswirkungen auf Prozesse und Systeme und gibt Handlungsempfehlungen.

A Smart Voltage and Current Monitoring System for Three Phase Inverters Using an Android Smartphone Application.

Science.gov (United States)

Mnati, Mohannad Jabbar; Van den Bossche, Alex; Chisab, Raad Farhood

2017-04-15

In this paper, a new smart voltage and current monitoring system (SVCMS) technique is proposed. It monitors a three phase electrical system using an Arduino platform as a microcontroller to read the voltage and current from sensors and then wirelessly send the measured data to monitor the results using a new Android application. The integrated SVCMS design uses an Arduino Nano V3.0 as the microcontroller to measure the results from three voltage and three current sensors and then send this data, after calculation, to the Android smartphone device of an end user using Bluetooth HC-05. The Arduino Nano V3.0 controller and Bluetooth HC-05 are a cheap microcontroller and wireless device, respectively. The new Android smartphone application that monitors the voltage and current measurements uses the open source MIT App Inventor 2 software. It allows for monitoring some elementary fundamental voltage power quality properties. An effort has been made to investigate what is possible using available off-the-shelf components and open source software.

From Smart Rooms to Smart Hotels

OpenAIRE

Petrevska, Biljana; Cingoski, Vlatko; Gelev, Saso

2016-01-01

This paper gives an overview of a potential path that new hotels have to satisfy to improve their status from a hotel with smart rooms towards a full-scale smart hotel facility. It presents a possible transitional way including innovative applications based on modern information technology for ambient settings in the domain of hotel industry that aims to improve the quality of offered services towards clients, starting from the present level of smart rooms. The main objective i...

From climate-smart agriculture to climate-smart landscapes

Directory of Open Access Journals (Sweden)

Scherr Sara J

2012-08-01

Full Text Available Abstract Background For agricultural systems to achieve climate-smart objectives, including improved food security and rural livelihoods as well as climate change adaptation and mitigation, they often need to be take a landscape approach; they must become ‘climate-smart landscapes’. Climate-smart landscapes operate on the principles of integrated landscape management, while explicitly incorporating adaptation and mitigation into their management objectives. Results An assessment of climate change dynamics related to agriculture suggests that three key features characterize a climate-smart landscape: climate-smart practices at the field and farm scale; diversity of land use across the landscape to provide resilience; and management of land use interactions at landscape scale to achieve social, economic and ecological impacts. To implement climate-smart agricultural landscapes with these features (that is, to successfully promote and sustain them over time, in the context of dynamic economic, social, ecological and climate conditions requires several institutional mechanisms: multi-stakeholder planning, supportive landscape governance and resource tenure, spatially-targeted investment in the landscape that supports climate-smart objectives, and tracking change to determine if social and climate goals are being met at different scales. Examples of climate-smart landscape initiatives in Madagascar’s Highlands, the African Sahel and Australian Wet Tropics illustrate the application of these elements in contrasting contexts. Conclusions To achieve climate-smart landscape initiatives widely and at scale will require strengthened technical capacities, institutions and political support for multi-stakeholder planning, governance, spatial targeting of investments and multi-objective impact monitoring.

The smart energy world from a competition point of view. An interaction between smart customers, smart market and smart grids; Die Smarte Energiewelt aus wettbewerblicher Sicht. Ein Zusammenspiel aus Smarten Kunden, Smart Market und Smarten Netzen

Energy Technology Data Exchange (ETDEWEB)

Wiechmann, Holger [EnBW Vertrieb GmbH, Stuttgart (Germany)

2012-07-01

Everybody is talking about the ''Energiewende, the Smart Energy World and about ''Smart Market / Smart Grids'', but almost no one knows, what it exactly means. But the ''Energiewende'' is already coming. The entire energy sector and particularly the elctricity industry are evolving towards decentralized structures mainly based on renewable energies. Not only the growth in fluctuating power generation from renewable energy sources like wind and photovoltaic but also their consumption on a local basis are calling for new ways of decentralized managing energy and for further developed market rules. The interaction of all stakeholders (customer, market players, grid operators, authorities) in a Smart Market/Smart Grid environment is required to successfully implement an efficient ''Energiewende''. Derived from the different interests of these stakeholders, the paper describes a system and roles within this system. It shows how Smart Market and Smart Grid can interact corresponding to the guidelines of German Regulator recently published. (orig.)

Peripheral blood signatures of lead exposure.

Directory of Open Access Journals (Sweden)

Heather G LaBreche

Full Text Available BACKGROUND: Current evidence indicates that even low-level lead (Pb exposure can have detrimental effects, especially in children. We tested the hypothesis that Pb exposure alters gene expression patterns in peripheral blood cells and that these changes reflect dose-specific alterations in the activity of particular pathways. METHODOLOGY/PRINCIPAL FINDING: Using Affymetrix Mouse Genome 430 2.0 arrays, we examined gene expression changes in the peripheral blood of female Balb/c mice following exposure to per os lead acetate trihydrate or plain drinking water for two weeks and after a two-week recovery period. Data sets were RMA-normalized and dose-specific signatures were generated using established methods of supervised classification and binary regression. Pathway activity was analyzed using the ScoreSignatures module from GenePattern. CONCLUSIONS/SIGNIFICANCE: The low-level Pb signature was 93% sensitive and 100% specific in classifying samples a leave-one-out crossvalidation. The high-level Pb signature demonstrated 100% sensitivity and specificity in the leave-one-out crossvalidation. These two signatures exhibited dose-specificity in their ability to predict Pb exposure and had little overlap in terms of constituent genes. The signatures also seemed to reflect current levels of Pb exposure rather than past exposure. Finally, the two doses showed differential activation of cellular pathways. Low-level Pb exposure increased activity of the interferon-gamma pathway, whereas high-level Pb exposure increased activity of the E2F1 pathway.

Smart market. From smart grid to the intelligent energy market; Smart Market. Vom Smart Grid zum intelligenten Energiemarkt

Energy Technology Data Exchange (ETDEWEB)

Aichele, Christian [Hochschule Kaiserslautern, Zweibruecken (Germany). Fachbereich Betriebswirtschaft; Doleski, Oliver D. (ed.)

2014-07-01

Dare more market. - The design of this postulate provides an important contribution to the success of the German energy transition. The Bundesnetzagentur has shown with its highly regarded benchmark paper on smart grids and markets leads the way towards more market in the energy sector. The therein required differentiation in a network and market sphere contributes to greater transparency on the consumer side and enables a gid releaving shift in energy consumption. The book focuses on actors and roles in the modified market circumstances as well as components and products of a future Smart Markets. Finally, to the reader concrete business models are offered. Authors from science and practice give in this book answers on how the interaction of Smart Grid and Smart Market works. [German] Mehr Markt wagen. - Die Ausgestaltung dieses Postulats liefert einen wichtigen Beitrag zum Gelingen der deutschen Energiewende. Die Bundesnetzagentur hat mit ihrem vielbeachteten Eckpunktepapier zu intelligenten Netzen und Maerkten diesen Weg in Richtung mehr Markt in der Energiewirtschaft gewiesen. Die darin geforderte Differenzierung in eine Netz- und Marktsphaere traegt zu mehr Transparenz auf der Verbraucherseite bei und ermoeglicht eine netzentlastende Verlagerung des Energieverbrauchs. Das Buch beleuchtet Akteure und Rollen im geaenderten Marktumfeld ebenso wie Komponenten und Produkte eines zukuenftigen Smart Markets. Schliesslich werden dem Leser konkrete Geschaeftsmodelle angeboten. Autoren aus Wissenschaft und Praxis geben in diesem Buch Antworten darauf, wie das Zusammenspiel von Smart Grid und Smart Market funktioniert.

Human-Computer Interaction in Smart Environments

Directory of Open Access Journals (Sweden)

Gianluca Paravati

2015-08-01

Full Text Available Here, we provide an overview of the content of the Special Issue on “Human-computer interaction in smart environments”. The aim of this Special Issue is to highlight technologies and solutions encompassing the use of mass-market sensors in current and emerging applications for interacting with Smart Environments. Selected papers address this topic by analyzing different interaction modalities, including hand/body gestures, face recognition, gaze/eye tracking, biosignal analysis, speech and activity recognition, and related issues.

Sensor technology for smart homes.

Science.gov (United States)

Ding, Dan; Cooper, Rory A; Pasquina, Paul F; Fici-Pasquina, Lavinia

2011-06-01

A smart home is a residence equipped with technology that observes the residents and provides proactive services. Most recently, it has been introduced as a potential solution to support independent living of people with disabilities and older adults, as well as to relieve the workload from family caregivers and health providers. One of the key supporting features of a smart home is its ability to monitor the activities of daily living and safety of residents, and in detecting changes in their daily routines. With the availability of inexpensive low-power sensors, radios, and embedded processors, current smart homes are typically equipped with a large amount of networked sensors which collaboratively process and make deductions from the acquired data on the state of the home as well as the activities and behaviors of its residents. This article reviews sensor technology used in smart homes with a focus on direct environment sensing and infrastructure mediated sensing. The article also points out the strengths and limitations of different sensor technologies, as well as discusses challenges and opportunities from clinical, technical, and ethical perspectives. It is recommended that sensor technologies for smart homes address actual needs of all stake holders including end users, their family members and caregivers, and their doctors and therapists. More evidence on the appropriateness, usefulness, and cost benefits analysis of sensor technologies for smart homes is necessary before these sensors should be widely deployed into real-world residential settings and successfully integrated into everyday life and health care services. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Smart Metering. Technological, economic and legal aspects. 2. ed.; Smart Metering. Technologische, wirtschaftliche und juristische Aspekte des Smart Metering

Energy Technology Data Exchange (ETDEWEB)

Koehler-Schute, Christiana (ed.)

2010-07-01

Smart metering comprises more than just meter technology, and the use of information and communication technologies is indispensable. Processes, roles and business models must be reconsidered as further challenges arise in the context of smart metering. For one, there is the operator of the metering points. Secondly, there is the end user who is in the role of an active market partner. Further, there is smart metering as a basic technology, e.g. for smart grids and smart homes. In spite of the need for action, many utilities are reluctant to introduce smart metering. Reasons for this are the cost, a lack of defined standards, and an unclear legal situation. On the other hand, smart metering offers potential for grids and distribution that should be made use of. The authors discuss all aspects of the subject. The point out the chances and limitations of smart metering and present their own experience. [German] Smart Metering geht weit ueber die Zaehlertechnologie hinaus und der Einsatz von Informations- und Kommunikationstechnologien ist unabdingbar. Damit einhergehend muessen Prozesse, Rollen und auch Geschaeftsmodelle neu durchdacht werden. Denn weitere Herausforderungen stehen im direkten Zusammenhang mit Smart Metering. Das ist zum einen die Rolle des Messstellenbetreibers / Messdienstleisters. Das ist zum anderen der Endnutzer, dem die Rolle des aktiven Marktpartners zugedacht wird. Das ist des Weiteren das Smart Metering als Basistechnologie beispielsweise fuer Smart Grid und Smart Home. Trotz des Handlungsdrucks stehen viele Unternehmen der Energiewirtschaft dem Smart Metering zurueckhaltend gegenueber. Drei gewichtige Gruende werden ins Feld gefuehrt: die Kostenfrage, nicht definierte Standards und die in vielen Bereichen ungeklaerte Gesetzeslage. Demgegenueber bietet das Smart Metering Potenziale fuer Netz und Vertrieb, die es zu nutzen gilt. Die Autoren setzen sich in ihren Beitraegen mit diesen Themen auseinander, zeigen Chancen, aber auch Grenzen des

Smart garments in chronic disease management: progress and challenges

Science.gov (United States)

Khosla, Ajit

2012-10-01

This paper presents the progress made developments in the area of Smart Garments for chronic disease management over last 10 years. A large number of health monitoring smart garments and wearable sensors have been manufactured to monitor patient's physiological parameters such as electrocardiogram, blood pressure, body temperature, heart rate, oxygen saturation, while patient is not in hospital. In last few years with the advancement in smartphones and cloud computing it is now possible to send the measure physiological data to any desired location. However there are many challenges in the development of smart garment systems. The two major challenges are development of new lightweight power sources and there is a need for global standardization and a road map for development of smart garments. In this paper we will discuss current state-of-theart smart garments and wearable sensor systems. Also discussed will be the new emerging trends in smart garment research and development.

An Overview of the Smart Grid in Great Britain

Directory of Open Access Journals (Sweden)

Nick Jenkins

2015-12-01

Full Text Available This paper presents an overview of the current status of the development of the smart grid in Great Britain (GB. The definition, policy and technical drivers, incentive mechanisms, technological focus, and the industry's progress in developing the smart grid are described. In particular, the Low Carbon Networks Fund and Electricity Network Innovation Competition projects, together with the rollout of smart metering, are detailed. A more observable, controllable, automated, and integrated electricity network will be supported by these investments in conjunction with smart meter installation. It is found that the focus has mainly been on distribution networks as well as on real-time flows of information and interaction between suppliers and consumers facilitated by improved information and communications technology, active power flow management, demand management, and energy storage. The learning from the GB smart grid initiatives will provide valuable guidelines for future smart grid development in GB and other countries.

Data Commercialisation: Extracting Value from Smart Buildings

Directory of Open Access Journals (Sweden)

Antti Säynäjoki

2017-11-01

Full Text Available The purpose of this paper is to explore the current state of data commercialisation and external distribution in the Finnish real estate and construction (REC sector. We focus on how companies could more effectively benefit from digitalisation, with more holistic utilisation of data from smart buildings. We assess the current state of data utilisation and distribution using a start-up company analysis and industry workshops. According to our research, the data from smart buildings is gathered on a large scale but very seldom distributed outside company borders. The reason for this almost non-existent external data distribution is the lack of value of the external data. As a solution, we propose the Internet of Buildings framework. The framework is based on a platform ecosystem model that is complemented with data commercialisation roles. It takes into account the current data-related opportunities and challenges in the sector. Within the framework, we suggest stakeholder roles and modes of interaction that promote value creation from smart building data. The framework can be used as a starting point for developing data commercialisation and external data distribution in the sector.

Preliminary safety analysis methodology for the SMART

Energy Technology Data Exchange (ETDEWEB)

Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-03-01

This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

Cloud computing for energy management in smart grid - an application survey

International Nuclear Information System (INIS)

Naveen, P; Ing, Wong Kiing; Danquah, Michael Kobina; Sidhu, Amandeep S; Abu-Siada, Ahmed

2016-01-01

The smart grid is the emerging energy system wherein the application of information technology, tools and techniques that make the grid run more efficiently. It possesses demand response capacity to help balance electrical consumption with supply. The challenges and opportunities of emerging and future smart grids can be addressed by cloud computing. To focus on these requirements, we provide an in-depth survey on different cloud computing applications for energy management in the smart grid architecture. In this survey, we present an outline of the current state of research on smart grid development. We also propose a model of cloud based economic power dispatch for smart grid. (paper)

Smart metering gateway works as Smart Home Energy Manager; Smart Metering Gateway als Smart Home Energy Manager

Energy Technology Data Exchange (ETDEWEB)

Walter, Klaus-Dieter [SSV Software Systems GmbH, Hannover (Germany)

2011-07-01

The installation of smart meters together with real time consumption data visualization doesn't help to save energy CO2 emissions. With regards to refinancing options, the situation in Germany has been quite different since the middle of last year for buildings equipped with a photovoltaic system. If a heat pump system is also present, intelligent energy use in conjunction with smart meters can save considerable amounts of money. A Smart Home Energy Manager (SHEM) automates the energy saving. (orig.)

Development of auditing technology for accident analysis of SMART-P

Energy Technology Data Exchange (ETDEWEB)

Chung, B. D.; Kim, H. C.; Bae, K. H.; Lee, Y. J.; Chung, Y. J.; Jeong, J. J. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2003-06-15

The objective of this project is to develop thermal hydraulic models of the regulatory auditing codes for the application of SMART-P integrated reactor. The current year fall under the first step of the 3 year project, and the main researches were focused on identifying the candidate thermal hydraulic models for improvement. Well known PIRT methodology has been applied to identify model improvement items. As a part of PIRT process, the identification of SMART-P system and compenent has been performed. The scenario of each key accident and phenonema have been identified. To identify SMART-P thermal-hydraulic characteristics, preliminary calculation has been performed and identify the applicability and inprovement items of current auditing code, RELAP5.

The significance of digital data systems for smart city policy

NARCIS (Netherlands)

Kourtit, Karima; Nijkamp, Peter; Steenbruggen, John

2017-01-01

Our planet is gradually moving towards an urbanized world. Modern urban agglomerations tend to turn nowadays into advanced information hubs supporting a smart management of dynamic urban systems. The currently popular notion of ‘smart cities’ aims to provide a new perspective for sustainable and

Smart Cities in Taiwan: A Perspective on Big Data Applications

Directory of Open Access Journals (Sweden)

Shiann Ming Wu

2018-01-01

Full Text Available In this paper, we discuss the concept of a smart city based on information and communication technology (ICT, analyze the objectives of smart city development in Taiwan, and explain the supporting technologies that make such development possible. Subsequently, we propose a hierarchical structure framework of smart city systems with levels of complexity ranging from low to high and interconnections and interactive relationships in five dimensions: the Internet of Things (IoT, cloud computing, Big Data, Mobile Network, and smart business. We integrate each key resource of the core operation systems of cities to promote the innovative operation of cities and further optimize city development. We then propose a Big Data platform data flow framework that uses information from ubiquitous sensor networks and information equipment to analyze the Big Data application process of smart cities and determine the resulting advantages and challenges. Additionally, we analyze the current state of development of smart cities in Taiwan. Finally, we discuss a new philosophy of smart city development and provide a practical blueprint for the formation, operation, and development of the smart cities with the aim of creating a bright future for the smart cities of Taiwan.

Utilities’ Technology Management of Smart Grid Innovation and Implementation

DEFF Research Database (Denmark)

Tambo, Torben

2012-01-01

To create sustainability in society’s energy system, power producers and consumers need smart grid technology to balance among producing and consuming units. Smart grid makes up a host of specifications, unproven products and concepts as well as a strong and dedicated innovation process for utility...... companies. Few proven concepts exist, and with the prolongation, smart grid represents an excellent case of technology management. The current study uses a series of loosely related technological studies of smart grid technologies in SME electricity companies to highlight and characterise critical issues....... Major findings are that the companies have limited capabilities in management of technology despite both strong push and pull, and they suffer from vaguely expressed objectives....

How smart is smart? Theoretical and empirical considerations on implementing smart city objectives – a case study of Dutch railway station areas

NARCIS (Netherlands)

de Wijs, Lisanne; Witte, Patrick; Geertman, Stan

2016-01-01

The current widespread attention on the concept of smart city in both policy and practice has stimulated academic discussion regarding the scope and applicability of this concept. An important question is whether cities and regions are truly advanced in implementing the concept in their policies and

An integral effect test facility of the SMART, SMART ITL

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun Sik; Moon, Sang Ki; Kim, Yeon Sik; Cho, Seok; Choi, Ki Yong; Bae, Hwang; Kim, Dong Eok; Choi, Nam Hyun; Min, Kyoung Ho; Ko, Yung Joo; Shin, Yong Cheol; Park, Rae Joon; Lee, Won Jae; Song, Chul Hwa; Yi, Sung Jae [KAERI, Daejeon (Korea, Republic of)

2012-10-15

SMART (System integrated Modular Advanced ReacTor) is a 330 MWth integral pressurized water reactor (iPWR) developed by KAERI and had obtained standard design approval (SDA) from Korean regulatory authority on July 2012. In this SMART design main components including a pressurizer, reactor coolant pumps and steam generators are installed in a reactor pressure vessel without any large connecting pipes. As the LBLOCA scenario is inherently excluded, its safety systems could be simplified only to ensure the safety during the SBLOCA scenarios and the other system transients. An integral effect test loop for the SMART (SMART ITL), or called as FESTA, had been designed to simulate the integral thermal hydraulic behavior of the SMART. The objectives of the SMART ITL are to investigate and understand the integral performance of reactor systems and components and the thermal hydraulic phenomena occurred in the system during normal, abnormal and emergency conditions, and to verify the system safety during various design basis events of the SMART. The integral effect test data will also be used to validate the related thermal hydraulic models of the safety analysis code such as TASS/SMR S, which is used for performance and accident analysis of the SMART design. This paper introduces the scaling analysis and scientific design of the integral test facility of the SMART, SMART ITL and its scaling analysis results.

2nd international KES conference on Smart Education and Smart e-Learning

CERN Document Server

Howlett, Robert; Jain, Lakhmi

2015-01-01

This book contains the contributions presented at the 2nd international KES conference on Smart Education and Smart e-Learning, which took place in Sorrento, Italy, June 17-19, 2015. It contains a total of 45 peer-reviewed book chapters that are grouped into several parts: Part 1 - Smart Education, Part 2 – Smart Educational Technology, Part 3 – Smart e-Learning, Part 4 – Smart Professional Training and Teachers’ Education, and Part 5 – Smart Teaching and Training related Topics.  This book can be a useful source of research data and valuable information for faculty, scholars, Ph.D. students, administrators, and practitioners  - those who are interested in innovative areas of smart education and smart e-learning.  .

Smart Energy 2012. How smart is the way towards the turnaround in the energy policy; Smart Energy 2012. Wie smart ist der Weg zur Energiewende?

Energy Technology Data Exchange (ETDEWEB)

Grossmann, Uwe; Kunold, Ingo (eds.)

2012-07-01

The contribution under consideration contains fifteen contributions of well-known authors from commercial enterprises, public institutions and universities on smart energy: (1) Smart grids, but surely (Claudia Eckert); (2) Requirements concerning the further development of data protection and data security as part of the technological change (Reinhold Harnisch); (3) Standardization in the smart grid (Harald Orlamuender); (4) IEC 61850 - The standard for energy automation (Georg Harnischmacher); (5) Smart City, the intelligent grid in the city (Michael Laskowski); (6) IKT is a basis for a real smart power distribution system (Justus Bross); (7) Power transparency and optimized building optimization by means of a holistic automation concepts (Joerg Wollert); (8) Distributed architecture for a balancing aggregation of consumption and generation of power in private households (Kilian Hemmeboehle); (9) Development of an e-energy market place and first experiences from the field test in the E-DeMa project (Bernd Werner); (10) Smart metering rollout pilot ''30,000er'' (Axel Lauterkorn); (11) Experiences with the connexion and communication to smart meters in the project eTelligence (Guenter Pistoor); (12) Smart Phoenix - Intelligent energy networks in Dortmund (Roland Brueggemann); (13) Smart planning (C. Engels); Intelligent house control by means of smart metering (Sabine Wieland); (14) Dynamic billing of energy and value-added service in the networked home (Frank C. Bormann).

Mapping and navigational control for a “smart” wheelchair.

Science.gov (United States)

Schultz, Dana L; Shea, Kathleen M; Barrett, Steven F

2012-01-01

A “smart” wheelchair is in development to provide mobility to those unable to control a traditional wheelchair. A “smart” wheelchair is an autonomous machine with the ability to navigate a mapped environment while avoiding obstacles. The flexibility and complex design of “smart” wheelchairs have made those currently available expensive. Ongoing research at the University of Wyoming has been aimed at designing a cheaper, alternative control system that could be interfaced with a typical powered wheelchair. The goal of this project is to determine methods for mapping and navigational control for the wheelchair. The control system acquires data from eighteen sensors and uses the data to navigate around a pre-programmed map which is stored on a micro SD card. The control system also provides a user interface in the form of a touchscreen LCD. The designed system will be an easy-to-use and cost effective alternative to current “smart” wheelchair technology.

Enabling secure and privacy preserving communications in smart grids

CERN Document Server

Li, Hongwei

2014-01-01

This brief focuses on the current research on security and privacy preservation in smart grids. Along with a review of the existing works, this brief includes fundamental system models, possible frameworks, useful performance, and future research directions. It explores privacy preservation demand response with adaptive key evolution, secure and efficient Merkle tree based authentication, and fine-grained keywords comparison in the smart grid auction market. By examining the current and potential security and privacy threats, the author equips readers to understand the developing issues in sma

An assessment of the Italian smart gas metering program

International Nuclear Information System (INIS)

Di Castelnuovo, Matteo; Fumagalli, Elena

2013-01-01

The introduction of smart metering is one of the core elements in recent European policies targeting environmental sustainability and competitiveness of energy markets. Following the roll-out of smart electricity meters, in 2008 the Italian regulator designed an ambitious deployment program also for smart gas meters, that was recently modified in both scope and timing. This paper assesses Italy's original and current deployment plans, with a specific focus on the results of its cost–benefit analysis. In light of the evidence derived from the literature, we observe that the case for the roll-out of smart gas meters in Italy was not supported by a strong emphasis on energy savings but rather focused on increasing efficiency of the Italian gas market; in this respect, we argue that options other than smart gas metering should also be considered. Moreover the Italian cost–benefit analysis, which mostly dealt with the potential cost savings for distributors and suppliers, led to ambiguous results in terms of net present values; thus, we believe that an updated assessment would be extremely useful. Finally, in terms of technological choices, our analysis positively evaluates the regulator's recent proposal to consider a dual-fuel solution for the mass market deployment. - Highlights: • This paper assesses Italy's original and current deployment plans for smart gas meters. • The plan was not supported by a strong emphasis on energy savings. • A focus on increasing efficiency of the Italian gas market appears only partly justifiable. • The business case for adopting smart gas meters should be updated. • Our analysis positively evaluates the a dual-fuel solution for the mass market

3rd international KES conference on Smart Education and Smart e-Learning

CERN Document Server

Howlett, Robert; Jain, Lakhmi

2016-01-01

This book contains the contributions presented at the 3rd international KES conference on Smart Education and Smart e-Learning, which took place in Puerto de la Cruz, Tenerife, Spain, June 15-17, 2016. It contains a total of 56 peer-reviewed book chapters that are grouped into several parts: Part 1 - Smart University: Conceptual Modeling, Part 2 – Smart Education: Research and Case Studies, Part 3 – Smart e-Learning, Part 4 – Smart Education: Software and Hardware Systems, and Part 5 – Smart Technology as a Resource to Improve Education and Professional Training. We believe that the book will serve as a useful source of research data and valuable information for faculty, scholars, Ph.D. students, administrators, and practitioners - those who are interested in innovative areas of smart education and smart e-learning. .

7th ECCOMAS Thematic Conference on Smart Structures and Materials

CERN Document Server

Soares, Carlos

2017-01-01

This work was compiled with expanded and reviewed contributions from the 7th ECCOMAS Thematic Conference on Smart Structures and Materials, that was held from 3 to 6 June 2015 at Ponta Delgada, Azores, Portugal. The Conference provided a comprehensive forum for discussing the current state of the art in the field as well as generating inspiration for future ideas specifically on a multidisciplinary level. The scope of the Conference included topics related to the following areas: Fundamentals of smart materials and structures; Modeling/formulation and characterization of smart actuators, sensors and smart material systems; Trends and developments in diverse areas such as material science including composite materials, intelligent hydrogels, interfacial phenomena, phase boundaries and boundary layers of phase boundaries, control, micro- and nano-systems, electronics, etc. to be considered for smart systems; Comparative evaluation of different smart actuators and sensors; Analysis of structural concepts and des...

Smart governance for smart city

Science.gov (United States)

Mutiara, Dewi; Yuniarti, Siti; Pratama, Bambang

2018-03-01

Some of the local government in Indonesia claimed they already created a smart city. Mostly the claim based of IT utilization for their governance. In general, a smart city definition is to describe a developed urban area that creates sustainable economic development and high quality of life by excelling in multiple key; economy, mobility, environment, people, living, and government. For public services, the law guarantees good governance by setting the standard for e-government implicitly including for local government or a city. Based on the arguments, this research tries to test the condition of e-government of the Indonesian city in 34 provinces. The purpose is to map e-government condition by measuring indicators of smart government, which are: transparent governance and open data for the public. This research is departing from public information disclosure law and to correspond with the existence law. By examining government transparency, the output of the research can be used to measure the effectiveness of public information disclosure law and to determine the condition of e-government in local government in which as part of a smart city.

Current and Emerging Technologies for Probing Molecular Signatures of Traumatic Brain Injury

Directory of Open Access Journals (Sweden)

Ari Ercole

2017-08-01

Full Text Available Traumatic brain injury (TBI is understood as an interplay between the initial injury, subsequent secondary injuries, and a complex host response all of which are highly heterogeneous. An understanding of the underlying biology suggests a number of windows where mechanistically inspired interventions could be targeted. Unfortunately, biologically plausible therapies have to-date failed to translate into clinical practice. While a number of stereotypical pathways are now understood to be involved, current clinical characterization is too crude for it to be possible to characterize the biological phenotype in a truly mechanistically meaningful way. In this review, we examine current and emerging technologies for fuller biochemical characterization by the simultaneous measurement of multiple, diverse biomarkers. We describe how clinically available techniques such as cerebral microdialysis can be leveraged to give mechanistic insights into TBI pathobiology and how multiplex proteomic and metabolomic techniques can give a more complete description of the underlying biology. We also describe spatially resolved label-free multiplex techniques capable of probing structural differences in chemical signatures. Finally, we touch on the bioinformatics challenges that result from the acquisition of such large amounts of chemical data in the search for a more mechanistically complete description of the TBI phenotype.

SmartInspect: Smart Contract Inspection Technical Report

OpenAIRE

Bragagnolo , Santiago; Rocha , Henrique ,; Denker , Marcus; Ducasse , Stéphane

2017-01-01

Smart contracts are embedded procedures stored with the data they act upon. Debugging deployed Smart Contracts is a difficult task since once deployed, the code cannot be reexecuted and inspecting a simple attribute is not easily possible because data is encoded. In this technical report, we present SmartInspect to address the lack of inspectability of a deployed contract. Our solution analyses the contract state by using decompilation techniques and a mirror-based architecture to represent t...

Smart grid security

CERN Document Server

Goel, Sanjay; Papakonstantinou, Vagelis; Kloza, Dariusz

2015-01-01

This book on smart grid security is meant for a broad audience from managers to technical experts. It highlights security challenges that are faced in the smart grid as we widely deploy it across the landscape. It starts with a brief overview of the smart grid and then discusses some of the reported attacks on the grid. It covers network threats, cyber physical threats, smart metering threats, as well as privacy issues in the smart grid. Along with the threats the book discusses the means to improve smart grid security and the standards that are emerging in the field. The second part of the b

Reduction of a Ship's Magnetic Field Signatures

CERN Document Server

Holmes, John

2008-01-01

Decreasing the magnetic field signature of a naval vessel will reduce its susceptibility to detonating naval influence mines and the probability of a submarine being detected by underwater barriers and maritime patrol aircraft. Both passive and active techniques for reducing the magnetic signatures produced by a vessel's ferromagnetism, roll-induced eddy currents, corrosion-related sources, and stray fields are presented. Mathematical models of simple hull shapes are used to predict the levels of signature reduction that might be achieved through the use of alternate construction materials. Al

Smart wheelchairs: A literature review.

Science.gov (United States)

Simpson, Richard C

2005-01-01

Several studies have shown that both children and adults benefit substantially from access to a means of independent mobility. While the needs of many individuals with disabilities can be satisfied with traditional manual or powered wheelchairs, a segment of the disabled community finds it difficult or impossible to use wheelchairs independently. To accommodate this population, researchers have used technologies originally developed for mobile robots to create "smart wheelchairs." Smart wheelchairs have been the subject of research since the early 1980s and have been developed on four continents. This article presents a summary of the current state of the art and directions for future research.

SmartCop: Enabling Smart Traffic Violations Ticketing in Vehicular Named Data Networks

Directory of Open Access Journals (Sweden)

Syed Hassan Ahmed

2016-01-01

Full Text Available Recently, various applications for Vehicular Ad hoc Networks (VANETs have been proposed and smart traffic violation ticketing is one of them. On the other hand, the new Information-Centric Networking (ICN architectures have emerged and been investigated into VANETs, such as Vehicular Named Data Networking (VNDN. However, the existing applications in VANETs are not suitable for VNDN paradigm due to the dependency on a “named content” instead of a current “host-centric” approach. Thus, we need to design the emerging and new architectures for VNDN applications. In this paper, we propose a smart traffic violation ticketing (TVT system for VNDN, named as SmartCop, that enables a cop vehicle (CV to issue tickets for traffic violation(s to the offender(s autonomously, once they are in the transmission range of that CV. The ticket issuing delay, messaging cost, and percentage of violations detected for varying number of vehicles, violators, CVs, and vehicles speeds are estimated through simulations. In addition, we provide a road map of future research directions for enabling safe driving experience in future cars aided with VNDN technology.

Engineering the smart factory

Science.gov (United States)

Harrison, Robert; Vera, Daniel; Ahmad, Bilal

2016-10-01

The fourth industrial revolution promises to create what has been called the smart factory. The vision is that within such modular structured smart factories, cyber-physical systems monitor physical processes, create a virtual copy of the physical world and make decentralised decisions. This paper provides a view of this initiative from an automation systems perspective. In this context it considers how future automation systems might be effectively configured and supported through their lifecycles and how integration, application modelling, visualisation and reuse of such systems might be best achieved. The paper briefly describes limitations in current engineering methods, and new emerging approaches including the cyber physical systems (CPS) engineering tools being developed by the automation systems group (ASG) at Warwick Manufacturing Group, University of Warwick, UK.

Smart Meter (Gateways). Attacks and implementation of a cost effective security solution; Smart Meter (Gateways). Angriffe und Umsetzung einer kostenguenstigen Sicherheitsloesung

Energy Technology Data Exchange (ETDEWEB)

Krauss, Christoph [Fraunhofer Research Institution AISEC, Garching (Germany); Sigl, Georg [Technische Univ. Muenchen (Germany); Stumpf, Frederic

2012-07-01

Smart Meter (Gateways) are a central component of future Smart Grids and their secure operation must be ensured. In this paper, we first present several attacks on actual smart meter and gateway systems. Next, we describe a possible security solution which meets the requirements of the protection profile specified by the German Federal Office for Information Security (BIS) as far as possible with current available technology and includes additional security mechanisms. To realize a cost-efficient solution, we use off-the-shelf hardware for the mandatory Hardware Security Module (HSM) in form of a Trusted Platform Module (TPM). Finally, we give a brief overview on alternative approaches. (orig.)

SmartCampusAAU

DEFF Research Database (Denmark)

Hansen, Rene; Thomsen, Bent; Thomsen, Lone Leth

2013-01-01

This paper describes SmartCampusAAU - an open, extendable platform that supports the easy creation of indoor location based systems. SmartCampusAAU offers an app and backend that can be used to enable indoor positioning and navigation in any building. The SmartCampusAAU app is available on all ma...... major mobile platforms (Android, iPhone and Windows Phone) and supports both device- and infrastructure-based positioning. SmartCampusAAU also offers a publicly available OData backend that allows researchers to share radio map and location tracking data.......This paper describes SmartCampusAAU - an open, extendable platform that supports the easy creation of indoor location based systems. SmartCampusAAU offers an app and backend that can be used to enable indoor positioning and navigation in any building. The SmartCampusAAU app is available on all...

Threat Assessment for Multistage Cyber Attacks in Smart Grid Communication Networks

OpenAIRE

He, Xiaobing

2017-01-01

In smart grids, managing and controlling power operations are supported by information and communication technology (ICT) and supervisory control and data acquisition (SCADA) systems. The increasing adoption of new ICT assets in smart grids is making smart grids vulnerable to cyber threats, as well as raising numerous concerns about the adequacy of current security approaches. As a single act of penetration is often not sufficient for an attacker to achieve his/her goal, multistage cyb...

Embedded Acoustic Sensor Array for Engine Fan Noise Source Diagnostic Test: Feasibility of Noise Telemetry via Wireless Smart Sensors

Science.gov (United States)

Zaman, Afroz; Bauch, Matthew; Raible, Daniel

2011-01-01

Aircraft engines have evolved into a highly complex system to meet ever-increasing demands. The evolution of engine technologies has primarily been driven by fuel efficiency, reliability, as well as engine noise concerns. One of the sources of engine noise is pressure fluctuations that are induced on the stator vanes. These local pressure fluctuations, once produced, propagate and coalesce with the pressure waves originating elsewhere on the stator to form a spinning pressure pattern. Depending on the duct geometry, air flow, and frequency of fluctuations, these spinning pressure patterns are self-sustaining and result in noise which eventually radiate to the far-field from engine. To investigate the nature of vane pressure fluctuations and the resulting engine noise, unsteady pressure signatures from an array of embedded acoustic sensors are recorded as a part of vane noise source diagnostics. Output time signatures from these sensors are routed to a control and data processing station adding complexity to the system and cable loss to the measured signal. "Smart" wireless sensors have data processing capability at the sensor locations which further increases the potential of wireless sensors. Smart sensors can process measured data locally and transmit only the important information through wireless communication. The aim of this wireless noise telemetry task was to demonstrate a single acoustic sensor wireless link for unsteady pressure measurement, and thus, establish the feasibility of distributed smart sensors scheme for aircraft engine vane surface unsteady pressure data transmission and characterization.

Smart Energy Systems for coherent 100% renewable energy and transport solutions

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Lund, Henrik; Connolly, David

2015-01-01

The hypothesis of this paper is that in order to identify least cost solutions of the integration of fluctuating renewable energy sources into current or future 100% renewable energy supplies one has to take a Smart Energy Systems approach. This paper outline why and how to do so. Traditionally......, significant focus is put on the electricity sector alone to solve the renewable energy integration puzzle. Smart grid research traditionally focuses on ICT, smart meters, electricity storage technologies, and local (electric) smart grids. In contrast, the Smart Energy System focuses on merging the electricity......, heating and transport sectors, in combination with various intra-hour, hourly, daily, seasonal and biannual storage options, to create the flexibility necessary to integrate large penetrations of fluctuating renewable energy. However, in this paper we present the development and design of coherent Smart...

Simple, heart-smart substitutions

Science.gov (United States)

Coronary artery disease - heart smart substitutions; Atherosclerosis - heart smart substitutions; Cholesterol - heart smart substitutions; Coronary heart disease - heart smart substitutions; Healthy diet - heart ...

Quantum blind dual-signature scheme without arbitrator

International Nuclear Information System (INIS)

Li, Wei; Shi, Ronghua; Huang, Dazu; Shi, Jinjing; Guo, Ying

2016-01-01

Motivated by the elegant features of a bind signature, we suggest the design of a quantum blind dual-signature scheme with three phases, i.e., initial phase, signing phase and verification phase. Different from conventional schemes, legal messages are signed not only by the blind signatory but also by the sender in the signing phase. It does not rely much on an arbitrator in the verification phase as the previous quantum signature schemes usually do. The security is guaranteed by entanglement in quantum information processing. Security analysis demonstrates that the signature can be neither forged nor disavowed by illegal participants or attacker. It provides a potential application for e-commerce or e-payment systems with the current technology. (paper)

Quantum blind dual-signature scheme without arbitrator

Science.gov (United States)

Li, Wei; Shi, Ronghua; Huang, Dazu; Shi, Jinjing; Guo, Ying

2016-03-01

Motivated by the elegant features of a bind signature, we suggest the design of a quantum blind dual-signature scheme with three phases, i.e., initial phase, signing phase and verification phase. Different from conventional schemes, legal messages are signed not only by the blind signatory but also by the sender in the signing phase. It does not rely much on an arbitrator in the verification phase as the previous quantum signature schemes usually do. The security is guaranteed by entanglement in quantum information processing. Security analysis demonstrates that the signature can be neither forged nor disavowed by illegal participants or attacker. It provides a potential application for e-commerce or e-payment systems with the current technology.

Proceedings of the 2006 smart metering conference and expo

International Nuclear Information System (INIS)

2006-01-01

Ontario's smart metering program was launched as part of a general demand response management strategy to improve energy conservation in the province. Smart metering will help consumers to control their electricity bills through conservation and demand response, and will allow consumers to better manage their energy consumption and use it more effectively during cheaper, off-peak times of day. Smart metering systems measure how much electricity a customer uses on an hourly basis, and data is transferred daily to local electricity distributors. Toronto Hydro will have close to 200,000 smart meters installed by the end of 2006. By 2010, Toronto will be North America's largest urban centre to have made the full transition to smart metering technology across its entire base. This conference provided an update of Toronto Hydro's smart metering project, as well as details of their demand response program. Presentations were given by a variety of experts in information technology as well as electric power industry leaders North American demand and response metering strategies were reviewed, as well as various initiatives in advanced metering infrastructure (AMI). Security risks associated with smart metering environments were reviewed. An evaluation of the current regulatory environment was presented along with a discussion of smart metering standards and compatibility issues. New metering technologies were presented as well as various associated demand side management tools. Smart metering pilot programs and initiatives were discussed, and best practices in smart metering were evaluated. Twenty-nine presentations were given at the conference, 13 of which have been indexed separately for inclusion in this database. refs., tabs., figs

Design features of SMART for barge mounted application

International Nuclear Information System (INIS)

Doo-Jeong Lee; Ju-Hyeon Yoon; Ju-Pyung Kim; Jong-In Kim; Moon-Hee Chang

2000-01-01

SMART is an integral reactor of 330 MWt capacity with passive safety features being developed for a wide range of applications including the barge mounted co-generation plant. Its design strives to combine the firmly-established commercial reactor design with new advanced technologies. Thus the use of the industry proven KOFA (Korea Optimized Fuel Assembly) based nuclear fuels is pursued while such radically new technologies as self-pressurizing pressurizer, helical once-through steam generators, and advanced control concepts are being developed. The safety of SMART centers around enhancing the inherent safety characteristics of the reactor and salient features include low core power density, integral arrangement to eliminate large break loss of coolant accident, etc. The progression of emergency situations into accidents is prevented with a number of advanced engineered safety features such as Passive Residual Heat Removal System, Passive Emergency Core Cooling System, Safeguard Vessel, Passive Containment Over-pressure Protection. This paper presents the status of current SMART development, characteristics of SMART safety systems and the possibility of SMART application to barge mounted environment. (author)

Data transmission through power line of smart transmitter

International Nuclear Information System (INIS)

Kim, Jong Hyun; Kang, Hyun Gook; Seong, Poong Hyun

1996-01-01

In this study, the method to use the phase shift keying (PSK) communication technique in smart transmitter is presented. In nuclear applications, smart transmitters for various parameters are expected to improve the accuracy of measurement and to reduce the load of calibration work. The capability of communication in field level is the most important merit of the smart transmitter. The most popular method is using of digital and analog techniques simultaneously - transmitting measurements from the field at 4-20mA while modulating the current to carry digital information in both directions over the same twisted pairs. Conventional smart transmitters use the frequency shift keying (FSK) method for digital communication. Generally, however, the FSK method has the speed limit at 1200 bps. Amount of information to transmit becomes increasing as the processing technique is improved. The PSK method is noticeable alternative for high speed digital communication, but it has non-zero DC component. In order to use the PSK method in the field transmission with smart transmitter, the method to remove the DC component is studied in this work

Smart Cities - Smart Homes and Smart Home Technology

OpenAIRE

Faanes, Erlend Kydland

2014-01-01

This master’s thesis consists of two articles where the first article is theoretical and the second is the empirical study. Article I The purpose with this paper is to explore and illuminate how smart home and smart home technology can contribute to enhance health and Quality of Life in elderly citizens and allow them to live longer in their home. The paper provides a brief introduction to health promotion and highlights the thesis theoretical framework and foundation of Aaron Antonov...

Smart health monitoring systems: an overview of design and modeling.

Science.gov (United States)

Baig, Mirza Mansoor; Gholamhosseini, Hamid

2013-04-01

Health monitoring systems have rapidly evolved during the past two decades and have the potential to change the way health care is currently delivered. Although smart health monitoring systems automate patient monitoring tasks and, thereby improve the patient workflow management, their efficiency in clinical settings is still debatable. This paper presents a review of smart health monitoring systems and an overview of their design and modeling. Furthermore, a critical analysis of the efficiency, clinical acceptability, strategies and recommendations on improving current health monitoring systems will be presented. The main aim is to review current state of the art monitoring systems and to perform extensive and an in-depth analysis of the findings in the area of smart health monitoring systems. In order to achieve this, over fifty different monitoring systems have been selected, categorized, classified and compared. Finally, major advances in the system design level have been discussed, current issues facing health care providers, as well as the potential challenges to health monitoring field will be identified and compared to other similar systems.

Electricity usage scheduling in smart building environments using smart devices.

Science.gov (United States)

Lee, Eunji; Bahn, Hyokyung

2013-01-01

With the recent advances in smart grid technologies as well as the increasing dissemination of smart meters, the electricity usage of every moment can be detected in modern smart building environments. Thus, the utility company adopts different price of electricity at each time slot considering the peak time. This paper presents a new electricity usage scheduling algorithm for smart buildings that adopts real-time pricing of electricity. The proposed algorithm detects the change of electricity prices by making use of a smart device and changes the power mode of each electric device dynamically. Specifically, we formulate the electricity usage scheduling problem as a real-time task scheduling problem and show that it is a complex search problem that has an exponential time complexity. An efficient heuristic based on genetic algorithms is performed on a smart device to cut down the huge searching space and find a reasonable schedule within a feasible time budget. Experimental results with various building conditions show that the proposed algorithm reduces the electricity charge of a smart building by 25.6% on average and up to 33.4%.

Towards smart environments using smart objects.

Science.gov (United States)

Sedlmayr, Martin; Prokosch, Hans-Ulrich; Münch, Ulli

2011-01-01

Barcodes, RFID, WLAN, Bluetooth and many more technologies are used in hospitals. They are the technological bases for different applications such as patient monitoring, asset management and facility management. However, most of these applications exist side by side with hardly any integration and even interoperability is not guaranteed. Introducing the concept of smart objects inspired by the Internet of Things can improve the situation by separating the capabilities and functions of an object from the implementing technology such as RFID or WLAN. By aligning technological and business developments smart objects have the power to transform a hospital from an agglomeration of technologies into a smart environment.

Smart homes with smartphones : Creating a Smart home application for smartphones

OpenAIRE

Lärka, Martin

2015-01-01

The goal of this master thesis was to evaluate the field of Smart home applications run on mobile platforms such as smart phones. This was at the time a relatively new field that has attracted the attention of Smart phone giants like Apple and Google. This raised the question whether or not the users willingness to embrace the technology. To evaluate the field, a literature study was conducted covering the Smart home technology, and Apple’s and Google’s Smart home solutions. The rendered in a...

Country-specific factors for the development of household smart grid solutions

DEFF Research Database (Denmark)

Christensen, Toke Haunstrup; Ascarza, Ainhoa; Throndsen, William

The report provides an overview of relevant country-specific factors in relation to understanding the context of the development of smart grid solutions in Spain, Norway and Denmark (e.g. main characteristics of the energy system) and describes the current status of activities in relation to smart...

Attitude of senior citizens towards smart home technologies:a literature review

OpenAIRE

Hamal Mishra, Binisha

2015-01-01

Smart home can be of significant importance for positive ageing allowing elderly to maintain independence, functionality, well-being and higher quality of life. Aim: The aim of this thesis is to study attitude of senior citizens towards smart home technologies. Understanding senior citizen's attitude towards current smart home technol-ogies is an important aspect in optimization of the existing technologies as well as in the design of new technologies. The review will aim to find the answe...

Reconsidering the smart metering data collection frequency for distribution state estimation

OpenAIRE

Chen, Qipeng; Kaleshi, Dritan; Armour, Simon; Fan, Zhong

2015-01-01

The current UK Smart Metering Technical Specification requires smart meter readings to be collected once a day, primarily to support accurate billing without violating users' privacy. In this paper we consider the use of Smart Metering data for Distribution State Estimation (DSE), and compare the effectiveness of daily data collection strategy with a more frequent, half-hourly SM data collection strategy. We first assess the suitability of using the data for load forecasting at Low Voltage (L...

Hydro One smart meter/smart grid : realizing the vision

Energy Technology Data Exchange (ETDEWEB)

Stevens, R. [Hydro One Networks Inc., Toronto, ON (Canada)

2010-07-01

Ontario's Hydro One Networks has been installing smart meters as part of its smart grid plan since 2007. The smart grid plan forms part of the utility's overall aim to create an energy conservation culture across the province. The utility now has over 1 million installed meters over a 640,000{sup 2} km territory. The smart grid planning team has adopted the use of an upgraded open protocol standards-based communications as part of its 2-way high bandwidth network. The utility is using a 1.8 Ghz worldwide interoperability for microwave access (WiMAX) spectrum designed specifically for the protection of electric utility infrastructure. The utility is now incorporating proof-of-concept applications including automated reclosers, remote terminal units, demand management devices and mobile technologies for use in its smart grid procedures. Various smart zone business scenarios were also described in this power point presentation, as well as details of Hydro One's integration plans for vendors and other power systems. tabs., figs.

Smart Companies, Inspiring the Future: A Theoretical Review

OpenAIRE

Echazarreta Soler, Carmen; Costa Marcé, Albert

2017-01-01

The economic and financial global crises have accelerated the search for alternative business models. The aim of this article is to describe the main characteristics of smart companies capable of overcoming the shortcomings of the current economic system. After conducting a theoretical review of the main studies related to this area, we conclude that there is a need for smart companies championed by leaders who promote the use of information technologies and communication as means...

Digital Omotenashi: Toward a Smart Tourism Design Systems

OpenAIRE

Chaeyoung Lim; Noha Mostafa; Jaehyun Park

2017-01-01

The tourism industry is currently facing many challenges; one of the main challenges is the lack of having smart tourism systems that make use of the recent advances in information and communication technology. Another challenge is designing such smart tourism systems while embracing diversified tourists’ sustainable values of experience (functional values, social values, emotional values, and epistemic values). In light of these challenges, the overall objective of this work is to design a s...

Privacy Enforcement in a Cost-Effective Smart Grid

DEFF Research Database (Denmark)

Mikkelsen, Søren Aagaard

In this technical report we present the current state of the research conducted during the first part of the PhD period. The PhD thesis “Privacy Enforcement in a Cost-Effective Smart Grid” focuses on ensuring privacy when generating market for energy service providers that develop web services...... for the residential domain in the envisaged smart grid. The PhD project is funded and associated to the EU project “Energy Demand Aware Open Services for Smart Grid Intelligent Automation” (Smart HG) and therefore introduces the project on a system-level. Based on this, we present some of the integration, security...... and privacy challenges that emerge when designing a system architecture and infrastructure. The resulting architecture is a consumer-centric and agent-based design and uses open Internet-based communication protocols for enabling interoperability while being cost-effective. Finally, the PhD report present...

Smart Grid, Smart Europe

OpenAIRE

VITIELLO SILVIA; FULLI Gianluca; MENGOLINI Anna Maria

2013-01-01

Le smart grid, o reti elettriche intelligenti, aprono la strada a nuove applicazioni con conseguenze di vasta portata per l’intero sistema elettrico, tra le quali la principale è la capacità di integrare nella rete esistente più fonti di energia rinnovabili (FER), veicoli elettrici e fonti di generazione distribuita. Le smart grid inoltre garantiscono una più efficiente ed affidabile risposta alla domanda di energia, sia da un punto di vista tecnico, permettendo un monitoraggio e un controll...

Test-driven modeling and development of cloud-enabled cyber-physical smart systems

DEFF Research Database (Denmark)

Munck, Allan; Madsen, Jan

2017-01-01

Embedded products currently tend to evolve into large and complex smart systems where products are enriched with services through clouds and other web technologies. The complex characteristics of smart systems make it very difficult to guarantee functionality, safety, security and performance...

Reduction of peak energy demand based on smart appliances energy consumption adjustment

Science.gov (United States)

Powroźnik, P.; Szulim, R.

2017-08-01

In the paper the concept of elastic model of energy management for smart grid and micro smart grid is presented. For the proposed model a method for reducing peak demand in micro smart grid has been defined. The idea of peak demand reduction in elastic model of energy management is to introduce a balance between demand and supply of current power for the given Micro Smart Grid in the given moment. The results of the simulations studies were presented. They were carried out on real household data available on UCI Machine Learning Repository. The results may have practical application in the smart grid networks, where there is a need for smart appliances energy consumption adjustment. The article presents a proposal to implement the elastic model of energy management as the cloud computing solution. This approach of peak demand reduction might have application particularly in a large smart grid.

mQoL smart lab

DEFF Research Database (Denmark)

De Masi, Alexandre; Ciman, Matteo; Gustarini, Mattia

2016-01-01

serve quality research in all of them. In this paper, we present own "mQoL Smart Lab" for interdisciplinary research efforts on individuals' "Quality of Life" improvement. We present an evolution of our current in-house living lab platform enabling continuous, pervasive data collection from individuals...

Smart Grid Innovation Management for SME Electricity Companies

DEFF Research Database (Denmark)

Tambo, Torben

2011-01-01

innovation process lies ahead for utility companies in screening, testing, maturing, implementing and operating smart grids. This process is expected to follow the political targets for CO2 reduction stretching forward until 2050. As no proven concepts exists, and as the process is expected to progress many...... years ahead, smart grid represents an excellent case of continuous innovation. The current study use a series of loosely related technological studies of smart grid related technologies in SME electricity companies to highlight critical issues in this innovation process. Major findings...... are that the companies have limited innovation capabilities, they are presented with plenty of technological offerings that eventually have to be rejected, and they suffer from absence of clear objectives....

A PSA study for the SMART basic design

International Nuclear Information System (INIS)

Han, Sang Hoon; Kim, H. C.; Yang, S. H.; Lee, D. J.

2002-03-01

SMART (System-Integrated Modular Advanced Reactor) is under development that is an advanced integral type small and medium category nuclear power reactor with the rated thermal power of 330 MW. A Probabilistic Safety Analysis (PSA) for the SMART basic design has been performed to evaluate the safety and optimize the design. Currently, the basic design is done and the detailed design is not available for the SMART, we made several assumptions about the system design before performing the PSA. The scope of the PSA was limited to the Level-1 internal full power PSA. The level-2 and 3 PSA, the external PSA, and the low power/shutdown PSA will be performed in the final design stage

Smart Chips for Smart Surroundings -- 4S

NARCIS (Netherlands)

Schuler, Eberhard; König, Ralf; Becker, Jürgen; Rauwerda, G.K.; van de Burgwal, M.D.; Smit, Gerardus Johannes Maria; Cardoso, João M.P.; Hübner, Michael

2011-01-01

The overall mission of the 4S project (Smart Chips for Smart Surroundings) was to define and develop efficient flexible, reconfigurable core building blocks, including the supporting tools, for future Ambient System Devices. Reconfigurability offers the needed flexibility and adaptability, it

On the Techniques and Tools for Privacy-Preserving Smart Contracts

Directory of Open Access Journals (Sweden)

Anastasia A. Barinova

2017-06-01

Full Text Available Currently, business processes become more and more complicated. Data used in these processes circulates mainly through the digital communications. Due to these conditions some kind of electronic contracts for business deals becomes necessary. Smart contracts should describe a set of conditions, implemented through some events in the real world and digital systems. The most important requirement for this technology is privacy ensuring. In this work we have explored existing projects of privacy-preserving smart contracts, defined comparison criteria, compared projects and made a conclusion about options required for smart contract frameworks.

Japan. Superconductivity for Smart Grids

Energy Technology Data Exchange (ETDEWEB)

Hayakawa, K.

2012-11-15

Currently, many smart grid projects are running or planned worldwide. These aim at controlling the electricity supply more efficiently and more stably in a new power network system. In Japan, especially superconductivity technology development projects are carried out to contribute to the future smart grid. Japanese cable makers such as Sumitomo Electric and Furukawa Electric are leading in the production of high-temperature superconducting (HTS) power cables. The world's largest electric current and highest voltage superconductivity proving tests have been started this year. Big cities such as Tokyo will be expected to introduce the HTS power cables to reduce transport losses and to meet the increased electricity demand in the near future. Superconducting devices, HTS power cables, Superconducting Magnetic Energy Storage (SMES) and flywheels are the focus of new developments in cooperations between companies, universities and research institutes, funded by the Japanese research and development funding organization New Energy and Industrial Technology Development Organization (NEDO)

A Review of Systems and Technologies for Smart Homes and Smart Grids

OpenAIRE

Lobaccaro, Gabriele; Carlucci, Salvatore; Löfström, Erica

2016-01-01

In the actual era of smart homes and smart grids, advanced technological systems that allow the automation of domestic tasks are developing rapidly. There are numerous technologies and applications that can be installed in smart homes today. They enable communication between home appliances and users, and enhance home appliances’ automation, monitoring and remote control capabilities. This review article, by introducing the concept of the smart home and the advent of the smart grid, investiga...

Intelligent Demand Side Management within production systems. Towards Industrial Smart Grids; Intelligente Lastverschiebung in der Produktionstechnik. Ein Weg zum Industrial Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Schriegel, Sebastian; Pethig, Florian; Jasperneite, Juergen [Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA), Lemgo (Germany)

2012-07-01

Demand Side Management is a key technology of smart grids. Consumers adjust their energy consumption at current time-volatile energy generation capacity. The currently used energy consumption optimizations, such as the use of energy efficient actuators, pause functions and peak load management should be supplemented by a dynamic real-time energy management. For industrial consumers, such an energy management may be established at various levels of the automation pyramid. On plant level energy optimization is based on predictions, on control and field level optimization is based on process variables. The taxonomy of potential energy optimization differentiates between organizational, synchronization and single parameter optimization. This potential can be exploited with intelligent control technology based on qualified process models and tunable control programs. An Industrial Smart Grid results by interlinking the former mentioned intelligent control technologies with the plant infrastructure and thereby provides an optimal energy consumption behavior and a perfect integration into and interaction with the smart grid. (orig.)

[Smart cards in health services].

Science.gov (United States)

Rienhoff, O

2001-10-01

Since the early 1980-ties it has been tried to utilise smart cards in health care. All industrialised countries participated in those efforts. The most sustainable analyses took place in Europe--specifically in the United Kingdom, France, and Germany. The first systems installed (the service access cards in F and G, the Health Professional Card in F) are already conceptionally outdated today. The senior understanding of the great importance of smart cards for security of electronic communication in health care does contrast to a hesitating behaviour of the key players in health care and health politics in Germany. There are clear hints that this may relate to the low informatics knowledge of current senior management.

A review of Smart House Analysis Methods for Assisting Older People Living Alone

OpenAIRE

Sanchez, Veralia Gabriela; Pfeiffer, Carlos; Skeie, Nils-Olav

2017-01-01

Smart Houses are a prominent field of research referring to environments adapted to assist people in their everyday life. Older people and people with disabilities would benefit the most from the use of Smart Houses because they provide the opportunity for them to stay in their home for as long as possible. In this review, the developments achieved in the field of Smart Houses for the last 16 years are described. The concept of Smart Houses, the most used analysis methods, and current challen...

Smart Energy 2011. Smart Grid or the future of power industry; Smart Energy 2011. Smart Grid oder die Zukunft der Energiewirtschaft

Energy Technology Data Exchange (ETDEWEB)

Grossmann, Uwe; Kunold, Ingo (eds.)

2011-07-01

The demand for smart grids, energy information networks, smart metering, new tariffs offering incentives for load shifting to household customers and load reduction options to energy providers are discussed increasingly. The privacy protection of customers being threatened by detailed consumption profiles also needs attention. Practitioners and researches from enterprises and research institutions present results from their field of work in nine papers. This book mainly focusses on three topics: 'Energy 2020', 'Data protection and data security within smart grids' and 'Smart grid and energy information networks'. On the one hand this volume addresses researchers and practitioners from enterprises and research institutions, on the other hand teachers and students dealing with questions concerning the energy market of the future. (orig.)

A Review of Smart House Analysis Methods for Assisting Older People Living Alone

Directory of Open Access Journals (Sweden)

Veralia Gabriela Sanchez

2017-07-01

Full Text Available Smart Houses are a prominent field of research referring to environments adapted to assist people in their everyday life. Older people and people with disabilities would benefit the most from the use of Smart Houses because they provide the opportunity for them to stay in their home for as long as possible. In this review, the developments achieved in the field of Smart Houses for the last 16 years are described. The concept of Smart Houses, the most used analysis methods, and current challenges in Smart Houses are presented. A brief introduction of the analysis methods is given, and their implementation is also reported.

Smart Beta or Smart Alpha

DEFF Research Database (Denmark)

Winther, Kenneth Lillelund; Steenstrup, Søren Resen

2016-01-01

that smart beta investing probably will do better than passive market capitalization investing over time, we believe many are coming to a conclusion too quickly regarding active managers. Institutional investors are able to guide managers through benchmarks and risk frameworks toward the same well......Smart beta has become the flavor of the decade in the investment world with its low fees, easy access to rewarded risk premiums, and appearance of providing good investment results relative to both traditional passive benchmarks and actively managed funds. Although we consider it well documented......-documented smart beta risk premiums and still motivate active managers to avoid value traps, too highly priced small caps, defensives, etc. By constructing the equity portfolios of active managers that resemble the most widely used risk premiums, we show that the returns and risk-adjusted returns measures...

On privacy-preserving protocols for smart metering systems security and privacy in smart grids

CERN Document Server

Borges de Oliveira, Fábio

2017-01-01

This book presents current research in privacy-preserving protocols for smart grids. It contains several approaches and compares them analytically and by means of simulation. In particular, the book introduces asymmetric DC-Nets, which offer an ideal combination of performance and features in comparison with homomorphic encryption; data anonymization via cryptographic protocols; and data obfuscation by means of noise injection or by means of the installation of storage banks. The author shows that this theory can be leveraged into several application scenarios, and how asymmetric DC-Nets are generalizations of additive homomorphic encryption schemes and abstractions of symmetric DC-Nets. The book provides the reader with an understanding about smart grid scenarios, the privacy problem, and the mathematics and algorithms used to solve it.

Smart Grid: Network simulator for smart grid test-bed

International Nuclear Information System (INIS)

Lai, L C; Ong, H S; Che, Y X; Do, N Q; Ong, X J

2013-01-01

Smart Grid become more popular, a smaller scale of smart grid test-bed is set up at UNITEN to investigate the performance and to find out future enhancement of smart grid in Malaysia. The fundamental requirement in this project is design a network with low delay, no packet drop and with high data rate. Different type of traffic has its own characteristic and is suitable for different type of network and requirement. However no one understands the natural of traffic in smart grid. This paper presents the comparison between different types of traffic to find out the most suitable traffic for the optimal network performance.

Efficient and Privacy-Aware Power Injection over AMI and Smart Grid Slice in Future 5G Networks

Directory of Open Access Journals (Sweden)

Yinghui Zhang

2017-01-01

Full Text Available Smart grid is critical to the success of next generation of power grid, which is expected to be characterized by efficiency, cleanliness, security, and privacy. In this paper, aiming to tackle the security and privacy issues of power injection, we propose an efficient and privacy-aware power injection (EPPI scheme suitable for advanced metering infrastructure and 5G smart grid network slice. In EPPI, each power storage unit first blinds its power injection bid and then gives the blinded bid together with a signature to the local gateway. The gateway removes a partial blind factor from each blinded bid and then sends to the utility company aggregated bid and signature by using a novel aggregation technique called hash-then-addition. The utility company can get the total amount of collected power at each time slot by removing a blind factor from the aggregated bid. Throughout the EPPI system, both the gateway and the utility company cannot know individual bids and hence user privacy is preserved. In particular, EPPI allows the utility company to check the integrity and authenticity of the collected data. Finally, extensive evaluations indicate that EPPI is secure and privacy-aware and it is efficient in terms of computation and communication cost.

Authentication techniques for smart cards

International Nuclear Information System (INIS)

Nelson, R.A.

1994-02-01

Smart card systems are most cost efficient when implemented as a distributed system, which is a system without central host interaction or a local database of card numbers for verifying transaction approval. A distributed system, as such, presents special card and user authentication problems. Fortunately, smart cards offer processing capabilities that provide solutions to authentication problems, provided the system is designed with proper data integrity measures. Smart card systems maintain data integrity through a security design that controls data sources and limits data changes. A good security design is usually a result of a system analysis that provides a thorough understanding of the application needs. Once designers understand the application, they may specify authentication techniques that mitigate the risk of system compromise or failure. Current authentication techniques include cryptography, passwords, challenge/response protocols, and biometrics. The security design includes these techniques to help prevent counterfeit cards, unauthorized use, or information compromise. This paper discusses card authentication and user identity techniques that enhance security for microprocessor card systems. It also describes the analysis process used for determining proper authentication techniques for a system

A MCIN-based architecture of smart agriculture

Directory of Open Access Journals (Sweden)

Xiang Gu

2017-09-01

Full Text Available Purpose – Material conscious and information network (MCIN is a kind of cyber physics social system. This paper aims to study the MCIN modeling method and design the MCIN-based architecture of smart agriculture (MCIN-ASA which is different from current vertical architecture and involves production, management and commerce. Architecture is composed of three MCIN-ASA participants which are MCIN-ASA enterprises, individuals and commodity. Design/methodology/approach – Architecture uses enterprises and individuals personalized portals as the carriers which are linked precisely with each other through a peer-to-peer network called six-degrees-of-separation block-chain. The authors want to establish a self-organization, open and ecological operational system which includes active, personalized consumption, direct, centralized distribution, distributed and smart production. Findings – The paper models three main MCIN-ASA participants, namely, design the smart supply, demand and management functions, which show the feasibility innovation and high efficiency of implementing MCIN on agriculture. At the same time, the paper presents a prototype system based on the architecture. Originality/value – The authors think that MCIN-ASA improves current agriculture greatly and inspires a lot in production-marketing-combined electronic commerce.

User Adaptive and Context-Aware Smart Home Using Pervasive and Semantic Technologies

Directory of Open Access Journals (Sweden)

Aggeliki Vlachostergiou

2016-01-01

Full Text Available Ubiquitous Computing is moving the interaction away from the human-computer paradigm and towards the creation of smart environments that users and things, from the IoT perspective, interact with. User modeling and adaptation is consistently present having the human user as a constant but pervasive interaction introduces the need for context incorporation towards context-aware smart environments. The current article discusses both aspects of the user modeling and adaptation as well as context awareness and incorporation into the smart home domain. Users are modeled as fuzzy personas and these models are semantically related. Context information is collected via sensors and corresponds to various aspects of the pervasive interaction such as temperature and humidity, but also smart city sensors and services. This context information enhances the smart home environment via the incorporation of user defined home rules. Semantic Web technologies support the knowledge representation of this ecosystem while the overall architecture has been experimentally verified using input from the SmartSantander smart city and applying it to the SandS smart home within FIRE and FIWARE frameworks.

On Establishing of the Concept of «Smart» Sustainable City

Directory of Open Access Journals (Sweden)

Korepanov Oleksiy S.

2018-03-01

Full Text Available The article is aimed at carrying out a comparative analysis of different approaches to the definition of concepts of «smart city» and «smart sustainable city», as well as formalizing these concepts for their implementation, which will potentially contribute to spreading of both the concept and the national practice of sustainable urban development, including the economic, environmental, and general justice issues. The main reasons connected with the key role of cities in the social and economic aspects of people’s life over the world and the enormous influence on the ecological stability are considered; the main current scientific sources concerned with the research on «smart» cities are covered, and their comparative analysis is carried out. The definitions of other alternative concepts such as «digital» city, «intellectual» city, «virtual» city, etc., representing more concrete and less inclusive levels of development of city, are considered in detail and presented. The differences between the concept of «smart city» and other related terms in three categories are discussed. A detailed analysis of different keywords from different sources is carried out. Based on the carried out analysis, six primary categories have been identified: smart life, smart people, smart environment and sustainability, smart management, smart mobility and smart economy, which are important for understanding the essence of «smart» sustainable city.

Conceptualizing smart service systems

DEFF Research Database (Denmark)

Beverungen, Daniel; Müller, Oliver; Matzner, Martin

2017-01-01

Recent years have seen the emergence of physical products that are digitally networked with other products and with information systems to enable complex business scenarios in manufacturing, mobility, or healthcare. These “smart products”, which enable the co-creation of “smart service” that is b......Recent years have seen the emergence of physical products that are digitally networked with other products and with information systems to enable complex business scenarios in manufacturing, mobility, or healthcare. These “smart products”, which enable the co-creation of “smart service......” that is based on monitoring, optimization, remote control, and autonomous adaptation of products, profoundly transform service systems into what we call “smart service systems”. In a multi-method study that includes conceptual research and qualitative data from in-depth interviews, we conceptualize “smart...... service” and “smart service systems” based on using smart products as boundary objects that integrate service consumers’ and service providers’ resources and activities. Smart products allow both actors to retrieve and to analyze aggregated field evidence and to adapt service systems based on contextual...

The smart - development and technology; Der smart - Entwicklung und Technik

Energy Technology Data Exchange (ETDEWEB)

Goppelt, G.

1999-06-01

The smart is the first representative of a radically new vehicle concept, with minimum space requirements and trend-setting in terms of ecology, safety, and individualism. The new design is not rooted in any tradition. The contribution describes the development process and constructional features of the smart. [Deutsch] Der smart ist der erste Vertreter eines voellig neuen Fahrzeugkonzepts. Bei kleinstem Raumbedarf soll er neue Massstaebe bei Oekologie, Sicherheit und Individualitaet setzen. Entstanden ist eine konsequente Neukonstruktion, die sich von bisherigen Traditionen loest. In diesem Beitrag sind der Entwicklungsprozess sowie die Konstruktionsmerkmale des smart beschrieben. (orig.)

Fine-Grained Forward-Secure Signature Schemes without Random Oracles

DEFF Research Database (Denmark)

Camenisch, Jan; Koprowski, Maciej

2006-01-01

We propose the concept of fine-grained forward-secure signature schemes. Such signature schemes not only provide nonrepudiation w.r.t. past time periods the way ordinary forward-secure signature schemes do but, in addition, allow the signer to specify which signatures of the current time period...... remain valid when revoking the public key. This is an important advantage if the signer produces many signatures per time period as otherwise the signer would have to re-issue those signatures (and possibly re-negotiate the respective messages) with a new key.Apart from a formal model for fine......-grained forward-secure signature schemes, we present practical schemes and prove them secure under the strong RSA assumption only, i.e., we do not resort to the random oracle model to prove security. As a side-result, we provide an ordinary forward-secure scheme whose key-update time is significantly smaller than...

Telecommunication Technologies for Smart Grid Projects with Focus on Smart Metering Applications

Directory of Open Access Journals (Sweden)

Nikoleta Andreadou

2016-05-01

Full Text Available This paper provides a study of the smart grid projects realised in Europe and presents their technological solutions with a focus on smart metering Low Voltage (LV applications. Special attention is given to the telecommunications technologies used. For this purpose, we present the telecommunication technologies chosen by several European utilities for the accomplishment of their smart meter national roll-outs. Further on, a study is performed based on the European Smart Grid Projects, highlighting their technological options. The range of the projects analysed covers the ones including smart metering implementation as well as those in which smart metering applications play a significant role in the overall project success. The survey reveals that various topics are directly or indirectly linked to smart metering applications, like smart home/building, energy management, grid monitoring and integration of Renewable Energy Sources (RES. Therefore, the technological options that lie behind such projects are pointed out. For reasons of completeness, we also present the main characteristics of the telecommunication technologies that are found to be used in practice for the LV grid.

Application of the smart portal in transportation

International Nuclear Information System (INIS)

Kercel, S.W.; Baylor, V.M.; Dress, W.B.; Hickerson, T.W.; Jatko, W.B.; Labaj, L.E.; Muhs, J.D.; Pack, R.M.

1996-01-01

Under a program sponsored by the Department of Energy, the Oak Ridge complex is developed a ''Portal-of-the-Future'', or ''smart portal''. This is a security portal for vehicular traffic which is intended to quickly detect explosives, hidden passengers, etc. It uses several technologies, including microwaves, weigh-in-motion, digital image processing, and electroacoustic wavelet-based heartbeat detection. A novel component of particular interest is the Enclosed Space Detection System (ESDS), which detects the presence of persons hiding in a vehicle. The system operates by detecting the presence of a human ballistocardiographic signature. Each time the heart beats, it generates a small but measurable shock wave that propagates through the body. The wave, whose graph is called a ballistocardiogram, is the mechanical analog of the electrocardiogram, which is routinely used for medical diagnosis. The wave is, in turn, coupled to any surface or object with which the body is in contact. If the body is located in an enclosed space, this will result in a measurable deflection of the surface of the enclosure. Independent testing has shown ESDS to be highly reliable. The technologies used in the smart portal operate in real time and allow vehicles to be checked through the portal in much less time than would be required for human inspection. Although not originally developed for commercial transportation, the smart portal has the potential to solve several transportation problems. It could relieve congestion at international highway border crossings by reducing the time required to inspect each vehicle while increasing the level of security. It can reduce highway congestion at the entrance of secure facilities such as prisons. Also, it could provide security at intermodal transfer points, such as airport parking lots and car ferry terminals

Application of the smart portal in transportation

Energy Technology Data Exchange (ETDEWEB)

Kercel, S.W.; Baylor, V.M.; Dress, W.B.; Hickerson, T.W.; Jatko, W.B.; Labaj, L.E.; Muhs, J.D.; Pack, R.M.

1996-12-31

Under a program sponsored by the Department of Energy, the Oak Ridge complex is developed a ``Portal-of-the-Future``, or ``smart portal``. This is a security portal for vehicular traffic which is intended to quickly detect explosives, hidden passengers, etc. It uses several technologies, including microwaves, weigh-in-motion, digital image processing, and electroacoustic wavelet-based heartbeat detection. A novel component of particular interest is the Enclosed Space Detection System (ESDS), which detects the presence of persons hiding in a vehicle. The system operates by detecting the presence of a human ballistocardiographic signature. Each time the heart beats, it generates a small but measurable shock wave that propagates through the body. The wave, whose graph is called a ballistocardiogram, is the mechanical analog of the electrocardiogram, which is routinely used for medical diagnosis. The wave is, in turn, coupled to any surface or object with which the body is in contact. If the body is located in an enclosed space, this will result in a measurable deflection of the surface of the enclosure. Independent testing has shown ESDS to be highly reliable. The technologies used in the smart portal operate in real time and allow vehicles to be checked through the portal in much less time than would be required for human inspection. Although not originally developed for commercial transportation, the smart portal has the potential to solve several transportation problems. It could relieve congestion at international highway border crossings by reducing the time required to inspect each vehicle while increasing the level of security. It can reduce highway congestion at the entrance of secure facilities such as prisons. Also, it could provide security at intermodal transfer points, such as airport parking lots and car ferry terminals.

Application of the smart portal in transportation

Science.gov (United States)

Kercel, Stephen W.; Baylor, Vivian M.; Dress, William B.; Hickerson, Tim W.; Jatko, William B.; Labaj, Leo E.; Muhs, Jeffrey D.; Pack, Richard M.

1997-02-01

Under a program sponsored by the Department of Energy, the Oak Ridge complex is developing a `Portal-of-the-Future', or `smart portal.' This is a security portal for vehicular traffic which is intended to quickly detect explosives, hidden passengers, etc. It uses several technologies, including microwaves, weigh-in-motion, digital image processing, and electroacoustic wavelet-based heartbeat detection. A novel component of particular interest is the Enclosed Space Detection System (ESDS), which detects the presence of persons hiding in a vehicle. The system operates by detecting the presence of a human ballistocardiographic signature. Each time the heart beats, it generates a small but measurable shock wave that propagates through the body. The wave, whose graph is called a ballistocardiogram, is the mechanical analog of the electrocardiograms, which is routinely used for medical diagnosis. The wave is, in turn, coupled to any surface or object with which the body is in contact. If the body is located in an enclosed space, this will result in a measurable deflection of the surface of the enclosure. Independent testing has shown ESDS to be highly reliable. The technologies used in the smart portal operate in real time and allow vehicles to be checked through the portal in much less time than would be required for human inspection. Although not originally developed for commercial transportation, the smart portal has the potential to solve several transportation problems. It could relieve congestion at international highway border crossings by reducing the time required to inspect each vehicle while increasing the level of security. It can reduce highway congestion at the entrance of secure facilities such as prisons. Also, it could provide security at intermodal transfer points, such as airport parking lots and car ferry terminals.

Smart Materials Meet Multifunctional Biomedical Devices: Current and Prospective Implications for Nanomedicine

Directory of Open Access Journals (Sweden)

Giada Graziana Genchi

2017-12-01

Full Text Available With the increasing advances in the fabrication and in monitoring approaches of nanotechnology devices, novel materials are being synthesized and tested for the interaction with biological environments. Among them, smart materials in particular provide versatile and dynamically tunable platforms for the investigation and manipulation of several biological activities with very low invasiveness in hardly accessible anatomical districts. In the following, we will briefly recall recent examples of nanotechnology-based materials that can be remotely activated and controlled through different sources of energy, such as electromagnetic fields or ultrasounds, for their relevance to both basic science investigations and translational nanomedicine. Moreover, we will introduce some examples of hybrid materials showing mutually beneficial components for the development of multifunctional devices, able to simultaneously perform duties like imaging, tissue targeting, drug delivery, and redox state control. Finally, we will highlight challenging perspectives for the development of theranostic agents (merging diagnostic and therapeutic functionalities, underlining open questions for these smart nanotechnology-based devices to be made readily available to the patients in need.

Evaluation on safety issues of SMART

International Nuclear Information System (INIS)

Kim, W. S.; Seol, K. W.; Yoon, Y. K.; Lee, J. H.

2001-01-01

Safety issues on the SMART were evaluated in the light of the compliance with the Ministerial Ordinance of Technical Requirements applying to Nuclear Installations, which was recently revised. Evaluation concludes that regulatory requirements associated with following items have to be developed as the licensing criteria for the SMART: (1) proving the safety of design or materials different form existing reactors; (2) coping with beyond design basis accidents; (3) rulemaking on the safety of reactor safeguard vessel ; (4) ensuring integrity of steam generator tubes; and (5) classifying equipment based on their safety significance. Appropriate actions including implementation of new requirements under development should be taken for safety issues such as diversity of reactivity control and in-service inspection of steam generator tubes that are not complied with the current Technical Requirements. Safety level of the SMART design will be evaluated further by the more detailed assessment according to the Technical Requirements, and additional safety issues will be identified and resolved, if it necessary

Smart meters. Smart metering. A solution module for a future-oriented energy system; Intelligente Zaehler. Smart Metering. Ein Loesungsbaustein fuer ein zukunftsfaehiges Energiesystem

Energy Technology Data Exchange (ETDEWEB)

Grimm, Nadia; Seidl, Hans [comps.

2011-12-15

The German Energy Agency GmbH (Berlin, Federal Republic of Germany) reports on smart metering as a solution module for a future-oriented energy system by means of the following contributions: (1) Key role for smart meters; (2) What is smart metering? (3) Implementation of smart metering in Europe; (4) The market development to date in Germany; (5) Practical experiences with smart metering in Germany; (6) Frequently asked questions; (7) Smart metering in intelligent networks; (8) Legal framework conditions; (9) Data security and data protection in the utilisation of smart meters; (10) Ongoing information; (11) Efficient energy systems.

Provably Secure and Subliminal-Free Variant of Schnorr Signature

OpenAIRE

Zhang , Yinghui; Li , Hui; Li , Xiaoqing; Zhu , Hui

2013-01-01

Part 2: Asian Conference on Availability, Reliability and Security (AsiaARES); International audience; Subliminal channels present a severe challenge to information security. Currently, subliminal channels still exist in Schnorr signature. In this paper, we propose a subliminal-free variant of Schnorr signature. In the proposed scheme, an honest-but-curious warden is introduced to help the signer to generate a signature on a given message, but it is disallowed to sign messages independently. ...

Present Situation and Future Development Trend of Smart Clothing

Directory of Open Access Journals (Sweden)

Ju Fengfan

2017-09-01

Full Text Available With the rapid development of science and technology, our daily clothes are changing quietly. Wearable smart clothing has gradually the leading role in the clothing market. This article first explains the concept of wearable intelligent clothing in china, and then I analyze the various types of wearable smart clothing that is currently facing problems, and summarized about the key points and future directions of wearable intelligent clothing design. From the beginning of 2013, smart watches, bracelets, glasses have entered the public vision, become a "trendsetter who sought the object", this year the industry was identified as "the first year of wearable equipment". In simple terms, a wearable device is a portable device that can be worn directly on the body, or integrated into the user's clothing or accessories. However, with the development of wireless sensor technology, kinds of wearable smart clothing gradually appeared in people's life, the smart clothing is made up of small chip, electronic components, power equipment, embedded into clothing, can achieve a specific function, in order to facilitate people's life.

From smart city to smart destination. The case of three Canadian cities

Directory of Open Access Journals (Sweden)

François Bédard

2018-03-01

Full Text Available Several cities around the world are self-proclaimed "smart" by integrating, in varying degrees, new technologies in the different spheres of the city. Nevertheless, despite this effervescence around the smart city, the concept requires more conceptualization from the researchers. This is even more important when it comes time to distinguishing between smart city and smart destination. The relationship between these two concepts is blurred and the transition from the smart city to the smart destination is not automatic. This situation is explained by the fact that the intrinsic characteristics of their respective target populations, being the citizens and the tourists, are different. This article compares three Canadian cities in the province of Quebec with the aim of demonstrating that the realization of a smart destination project requires the adaptation of governance structure and the involvement of all the stakeholders and more particularly in tourism.

A Cloud Associated Smart Grid Admin Dashboard

Directory of Open Access Journals (Sweden)

P. Naveen

2018-02-01

Full Text Available Intelligent smart grid system undertakes electricity demand in a sustainable, reliable, economical and environmentally friendly manner. As smart grid involves, it has the liability of meeting the changing consumer needs on the day-to-day basis. Modern energy consumers like to vivaciously regulate their consumption patterns more competently and intelligently than current provided ways. To fulfill the consumers’ needs, smart meters and sensors make the grid infrastructure more efficient and resilient in energy data collection and management even with the ever-changing renewable power generation. Though cloud acts as an outlet for the energy consumers to retrieve energy data from the grid, the information systems available are technically constrained and not user-friendly. Hence, a simple technology enabled utility-consumer interactive information system in the form of a dashboard is presented to cater the electric consumer needs.

Survey report on smart-tribo-mechanics; Smart tribo mechanics

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Survey results of smart-tribo-mechanics are described. For the smart-tribo-mechanics differing from the conventional tribology, an intelligent system is constructed by making full use of various science and technology ranging from basic to application, to solve problems. Self-diagnosis and self-remediation, active control, passive control, and smart-biotribo-mechanics are typical methods. Electronics, telecommunication, healthcare, and new biotechnology are new and advanced application areas. In these areas, tribology to control and act to the material surface in the atomic and molecular scale should be the key technology. In addition, the smart-tribo-mechanics is expected to be used for sustaining basic industry, such as material, transportation, and life industries. 101 refs., 67 figs., 14 tabs.

Big Data, Smart Homes and Ambient Assisted Living

OpenAIRE

Vimarlund, V.; Wass, S.

2014-01-01

Objectives: To discuss how current research in the area of smart homes and ambient assisted living will be influenced by the use of big data. Methods: A scoping review of literature published in scientific journals and conference proceedings was performed, focusing on smart homes, ambient assisted living and big data over the years 2011-2014. Results: The health and social care market has lagged behind other markets when it comes to the introduction of innovative IT solutions and the market f...

A Semantics-Rich Information Technology Architecture for Smart Buildings

Directory of Open Access Journals (Sweden)

Dario Bonino

2014-11-01

Full Text Available The design of smart homes, buildings and environments currently suffers from a low maturity of available methodologies and tools. Technologies, devices and protocols strongly bias the design process towards vertical integration, and more flexible solutions based on separation of design concerns are seldom applied. As a result, the current landscape of smart environments is mostly populated by defectively designed solutions where application requirements (e.g., end-user functionality are too often mixed and intertwined with technical requirements (e.g., managing the network of devices. A mature and effective design process must, instead, rely on a clear separation between the application layer and the underlying enabling technologies, to enable effective design reuse. The role of smart gateways is to enable this separation of concerns and to provide an abstracted view of available automation technology to higher software layers. This paper presents a blueprint for the information technology (IT architecture of smart buildings that builds on top of established software engineering practices, such as model-driven development and semantic representation, and that avoids many pitfalls inherent in legacy approaches. The paper will also present a representative use case where the approach has been applied and the corresponding modeling and software tools.

Enabling Technologies for Smart Grid Integration and Interoperability of Electric Vehicles

DEFF Research Database (Denmark)

Martinenas, Sergejus

Conventional, centralized power plants are being replaced by intermittent, distributed renewable energy sources, thus raising the concern about the stability of the power grid in its current state. All the while, electrification of all forms of transportation is increasing the load...... for successful EV integration into the smart grid, as a smart, mobile distributed energy resource. The work is split into three key topics: enabling technologies, grid service applications and interoperability issues. The current state of e-mobility technologies is surveyed. Technologies and protocols...... EVs to not only mitigate their own effects on the grid, but also provide value to grid operators, locally as well as system wide. Finally, it is shown that active integration of EVs into the smart grid, is not only achievable, but is well on its way to becoming a reality....

Book-Smart, Not Street-Smart: Blockchain-Based Smart Contracts and The Social Workings of Law

OpenAIRE

Karen E. C. Levy

2017-01-01

This paper critiques blockchain-based “smart contracts,” which aim to automatically and securely execute obligations without reliance on a centralized enforcement authority. Though smart contracts do have some features that might serve the goals of social justice and fairness, I suggest that they are based on a thin conception of what law does, and how it does it. Smart contracts focus on the technical form of contract to the exclusion of the social contexts within which contracts operate, an...

A Review of Systems and Technologies for Smart Homes and Smart Grids

Directory of Open Access Journals (Sweden)

Gabriele Lobaccaro

2016-05-01

Full Text Available In the actual era of smart homes and smart grids, advanced technological systems that allow the automation of domestic tasks are developing rapidly. There are numerous technologies and applications that can be installed in smart homes today. They enable communication between home appliances and users, and enhance home appliances’ automation, monitoring and remote control capabilities. This review article, by introducing the concept of the smart home and the advent of the smart grid, investigates technologies for smart homes. The technical descriptions of the systems are presented and point out advantages and disadvantages of each technology and product today available on the market. Barriers, challenges, benefits and future trends regarding the technologies and the role of users have also been discussed.

Towards a smart learning environment for smart city governance

OpenAIRE

Hammad, R.; Ludlow, D.; Computer Science and Creative Technology; Centre for Sustainable Planning

2016-01-01

Educational services provided to various stakeholders need to be actively developed to accommodate the diversity of learning models and to get the advantages of available resources (e.g. data) in smart cities governance. Despite the substantial literature on smart cities, for Technology-Enhanced Learning (TEL) and its related domains such as learning analytics and big data, little effort has been given to the creation of connectivity to smart cities governance to meet stakeholders’ demands, e...

Agent-based Decentralization of Applications in Distributed Smart Grid Systems

DEFF Research Database (Denmark)

Kienesberger, Georg; Xypolytou, Evangelia; Marchgraber, Jurgen

2015-01-01

systems (DMACS) and aims to give an overview on the different requirements and challenges on the way from current centralized control systems to DMACS. Therefore, different ICT scenarios and MAS topologies are employed to discuss the decentralization of three exemplary smart grid applications: voltage......Smart grid technology promises to prepare today’s power systems for the challenges of the future by extensive integration of information and communication technology (ICT). One key aspect is the control paradigm which will have to be shifted from completely centralized control systems to more...... dezentralized concepts in order to adapt to the distributed nature of smart grids. Multi-agent systems (MAS) are a very promising approach for designing distributed, decentralized systems, naturally also in the field of smart grids. This work introduces the notion of decentralized multi-agent-based control...

Towards the Smart World. Smart Platform: Infrastructure and Analytics

CSIR Research Space (South Africa)

Velthausz, D

2012-10-01

Full Text Available In this presentation the author outlines the 'smart world' concept and how technology (smart infrastructure, analytics) can foster smarter cities, smarter regions and a smarter world....

Traffic Information Systems for Smart Mobility as part of Smart Cities

OpenAIRE

Suske, David; Touko Tcheumadjeu, Louis Calvin; Sohr, Alexander; Xiaoxu, Bei

2016-01-01

The unlimited and unrestricted mobility of people and goods in urban areas is one of the key factors for economic and social development of the city. Today with the availability of smart technologies and various intelligent transportation and telematics solutions the Smart Mobility as part of a Smart City is possible to maintain the mobility ecosystem in the city. But to make the urban mobility smart by assuring the sustainability, safety, low emission and comfort in urban transport new mobil...

Smart houses for a smart grid

Energy Technology Data Exchange (ETDEWEB)

Kok, J.K.; Warmer, C.J. [ECN Efficiency and Infrastructure, Petten (Netherlands); Karnouskos, S.; Weidlich, A. [SAP Research, Karlsruhe Institute of Technology, (Germany); Nestle, D.; Strauss, P. [The Institut fuer Solare Energieversorgungstechnik ISET, University of Kassel, Kassel (Germany); Dimeas, A.; Hatziargyriou, N. [Institute Computers Communications Systems ICCS, National Technical University of Athens NTUA, Athens (Greece); Buchholz, B.; Drenkard, S. [MVV Energie, Berlin (Germany); Lioliou, V. [Public Power Corporation PPC, Athens (Greece)

2009-08-15

Innovative technologies and concepts will emerge as we move towards a more dynamic, service-based, market-driven infrastructure, where energy efficiency and savings can be facilitated by interactive distribution networks. A new generation of fully interactive Information and Communication Technologies (ICT) infrastructure has to be developed to support the optimal exploitation of the changing, complex business processes and to enable the efficient functioning of the deregulated energy market for the benefit of citizens and businesses. The architecture of such distributed system landscapes must be designed and validated, standards need to be created and widely supported, and comprehensive, reliable IT applications will need to be implemented. The collaboration between a smart house and a smart grid is a promising approach which, with the help of ICT can fully unleash the capabilities of the smart electricity network.

Smart Cities and the Idea of Smartness in Urban Development - A Critical Review

Science.gov (United States)

Husár, Milan; Ondrejička, Vladimír; Ceren Varış, Sıla

2017-10-01

The concept of smart cities is becoming another mantra for both developing and developed cities. For instance, Indian government in 2015 announced its objective to build one hundred smart cities all over the country. They clearly stated that they are choosing smart development as the underlying concept for their future growth as a way to foster economic development in smart way to avoid the paths of rapid industrialization and pollution of cities as it took place in Europe and United States. The first of these smart cities, Dholera, is already under construction and it attracts journalists and urban planners from all over the world. The aim of this paper is to critically discuss the theoretical backgrounds and the practices of smart cities and examine the ways the concept is implemented. The paper is based on thorough study of literature and examining the two case studies of Dholera (India) and Songdo (South Korea). Smart city is a contested concept without a unified definition. It stems from the idea of digital and information city promoted using information and communication technologies (ICT) to develop cities. By installation of ICT municipalities obtain large sets of data which are then transformed into effective urban policies. One of the pilot projects of this kind was Rio de Janeiro and building the Center of Operations by IBM Company. City made a great investment into the smart information system before two huge events took place - FIFA World Cup in 2014 and Olympic Games in 2016. The project raised many questions including whether and how it improved the life of its citizens and in what way it made the city smart. The other definition of smart city is the idea of smartness in city development in broader sense. It focuses on smart use of resources, smart and effective management and smart social inclusion. Within this view, the ICTs are one component of the concept, by no means its bread and butter. Technologies can be used in a variety of ways. Problem

5G and Cellular Networks in the Smart Grid

DEFF Research Database (Denmark)

Nielsen, Jimmy Jessen; Jorguseski, Ljupco; Zhang, Haibin

2018-01-01

grid. In the present chapter, we present the main features of both the non-3GPP technologies, IEEE 802.11ah, SigFox and LoRa, and the main features of past, current and future 3GPP technologies, namely releases High rate), 12-14 (IoT extensions) and 15-16 (5G). Additionally, we present......Wireless cellular networks will help Distribution System Operators (DSOs) to achieve observability below the substation level, which is needed to ensure stable operation in the smart grid. Both existing and upcoming cellular technologies are considered as candidates for helping to enable the smart...... the challenges and possible solutions for ensuring end-to-end security in smart grid systems....

Security in Intelligent Transport Systems for Smart Cities: From Theory to Practice

Science.gov (United States)

Javed, Muhammad Awais; Ben Hamida, Elyes; Znaidi, Wassim

2016-01-01

Connecting vehicles securely and reliably is pivotal to the implementation of next generation ITS applications of smart cities. With continuously growing security threats, vehicles could be exposed to a number of service attacks that could put their safety at stake. To address this concern, both US and European ITS standards have selected Elliptic Curve Cryptography (ECC) algorithms to secure vehicular communications. However, there is still a lack of benchmarking studies on existing security standards in real-world settings. In this paper, we first analyze the security architecture of the ETSI ITS standard. We then implement the ECC based digital signature and encryption procedures using an experimental test-bed and conduct an extensive benchmark study to assess their performance which depends on factors such as payload size, processor speed and security levels. Using network simulation models, we further evaluate the impact of standard compliant security procedures in dense and realistic smart cities scenarios. Obtained results suggest that existing security solutions directly impact the achieved quality of service (QoS) and safety awareness of vehicular applications, in terms of increased packet inter-arrival delays, packet and cryptographic losses, and reduced safety awareness in safety applications. Finally, we summarize the insights gained from the simulation results and discuss open research challenges for efficient working of security in ITS applications of smart cities. PMID:27314358

Security in Intelligent Transport Systems for Smart Cities: From Theory to Practice

Directory of Open Access Journals (Sweden)

Muhammad Awais Javed

2016-06-01

Full Text Available Connecting vehicles securely and reliably is pivotal to the implementation of next generation ITS applications of smart cities. With continuously growing security threats, vehicles could be exposed to a number of service attacks that could put their safety at stake. To address this concern, both US and European ITS standards have selected Elliptic Curve Cryptography (ECC algorithms to secure vehicular communications. However, there is still a lack of benchmarking studies on existing security standards in real-world settings. In this paper, we first analyze the security architecture of the ETSI ITS standard. We then implement the ECC based digital signature and encryption procedures using an experimental test-bed and conduct an extensive benchmark study to assess their performance which depends on factors such as payload size, processor speed and security levels. Using network simulation models, we further evaluate the impact of standard compliant security procedures in dense and realistic smart cities scenarios. Obtained results suggest that existing security solutions directly impact the achieved quality of service (QoS and safety awareness of vehicular applications, in terms of increased packet inter-arrival delays, packet and cryptographic losses, and reduced safety awareness in safety applications. Finally, we summarize the insights gained from the simulation results and discuss open research challenges for efficient working of security in ITS applications of smart cities.

Security in Intelligent Transport Systems for Smart Cities: From Theory to Practice.

Science.gov (United States)

Javed, Muhammad Awais; Ben Hamida, Elyes; Znaidi, Wassim

2016-06-15

Connecting vehicles securely and reliably is pivotal to the implementation of next generation ITS applications of smart cities. With continuously growing security threats, vehicles could be exposed to a number of service attacks that could put their safety at stake. To address this concern, both US and European ITS standards have selected Elliptic Curve Cryptography (ECC) algorithms to secure vehicular communications. However, there is still a lack of benchmarking studies on existing security standards in real-world settings. In this paper, we first analyze the security architecture of the ETSI ITS standard. We then implement the ECC based digital signature and encryption procedures using an experimental test-bed and conduct an extensive benchmark study to assess their performance which depends on factors such as payload size, processor speed and security levels. Using network simulation models, we further evaluate the impact of standard compliant security procedures in dense and realistic smart cities scenarios. Obtained results suggest that existing security solutions directly impact the achieved quality of service (QoS) and safety awareness of vehicular applications, in terms of increased packet inter-arrival delays, packet and cryptographic losses, and reduced safety awareness in safety applications. Finally, we summarize the insights gained from the simulation results and discuss open research challenges for efficient working of security in ITS applications of smart cities.

Final report SmartProofS. Results of projects of the SmartProofS program; Eindrapport SmartProofS. Projectresultaten van het SmartProofS programma

Energy Technology Data Exchange (ETDEWEB)

Van Hoorik, P.; Westerga, R. [Energy Valley, Groningen (Netherlands)

2011-05-15

The SmartProofs program aims to develop tools which must show that the principle of a Smart Power System (SPS) works and how. An SPS can ensure that the supply and demand of electricity in the grid is balanced, even in case more decentralized energy techniques will be put into use. This final report summarizes the main results and conclusions of the SmartProofs program. As part of the SPS program attention is paid to the impacts on the girds, the effects of centralized and decentralized management, disaster resilience, pricing models, potential benefits of control and new business models [Dutch] Het SmartProofs programma heeft tot doel om een concept van een Smart Power System (SPS) te ontwikkelen waarmee kan worden aangetoond dat het principe van een SPS werkt en op welke manier. Een SPS kan zorgen dat het aanbod van elektriciteit op het net op elk moment van de dag overeenkomt met de vraag, ook als er straks veel meer decentrale energietechnieken gebruikt worden waarmee zowel de vraag als het aanbod van elektriciteit onvoorspelbaar wordt. Dit eindrapport geeft een overzicht van de belangrijkste resultaten en conclusies van het SmartProofs programma. Het programma heeft in de werkpakketten deelvraagstukken rondom SmartProofS onderzocht rondom de effecten op onze energienetten, de effecten van zowel centrale- als decentrale aansturing, disaster resilience, prijsmodellen, mogelijke baten van aansturing en nieuwe business modellen.

Complex IoT Systems as Enablers for Smart Homes in a Smart City Vision

DEFF Research Database (Denmark)

Lynggaard, Per; Skouby, Knud Erik

2016-01-01

The world is entering a new era, where Internet-of-Things (IoT), smart homes, and smart cities will play an important role in meeting the so-called big challenges. In the near future, it is foreseen that the majority of the world’s population will live their lives in smart homes and in smart cities...... the “smart” vision. This paper proposes a specific solution in the form of a hierarchical layered ICT based infrastructure that handles ICT issues related to the “big challenges” and seamlessly integrates IoT, smart homes, and smart city structures into one coherent unit. To exemplify benefits......% of the wastewater energy in a smart residential building. By letting the smart city infrastructure coordinate and control the harvest time and duration, it is possible to achieve considerable energy savings in the smart homes, and it is possible to reduce the peak-load for district heating plants....

Elliptic Curve Cryptography-Based Authentication with Identity Protection for Smart Grids.

Directory of Open Access Journals (Sweden)

Liping Zhang

Full Text Available In a smart grid, the power service provider enables the expected power generation amount to be measured according to current power consumption, thus stabilizing the power system. However, the data transmitted over smart grids are not protected, and then suffer from several types of security threats and attacks. Thus, a robust and efficient authentication protocol should be provided to strength the security of smart grid networks. As the Supervisory Control and Data Acquisition system provides the security protection between the control center and substations in most smart grid environments, we focus on how to secure the communications between the substations and smart appliances. Existing security approaches fail to address the performance-security balance. In this study, we suggest a mitigation authentication protocol based on Elliptic Curve Cryptography with privacy protection by using a tamper-resistant device at the smart appliance side to achieve a delicate balance between performance and security of smart grids. The proposed protocol provides some attractive features such as identity protection, mutual authentication and key agreement. Finally, we demonstrate the completeness of the proposed protocol using the Gong-Needham-Yahalom logic.

Elliptic Curve Cryptography-Based Authentication with Identity Protection for Smart Grids.

Science.gov (United States)

Zhang, Liping; Tang, Shanyu; Luo, He

2016-01-01

In a smart grid, the power service provider enables the expected power generation amount to be measured according to current power consumption, thus stabilizing the power system. However, the data transmitted over smart grids are not protected, and then suffer from several types of security threats and attacks. Thus, a robust and efficient authentication protocol should be provided to strength the security of smart grid networks. As the Supervisory Control and Data Acquisition system provides the security protection between the control center and substations in most smart grid environments, we focus on how to secure the communications between the substations and smart appliances. Existing security approaches fail to address the performance-security balance. In this study, we suggest a mitigation authentication protocol based on Elliptic Curve Cryptography with privacy protection by using a tamper-resistant device at the smart appliance side to achieve a delicate balance between performance and security of smart grids. The proposed protocol provides some attractive features such as identity protection, mutual authentication and key agreement. Finally, we demonstrate the completeness of the proposed protocol using the Gong-Needham-Yahalom logic.

Smart City and Smart Tourism: A Case of Dubai

OpenAIRE

M. Sajid Khan; Mina Woo; Kichan Nam; Prakash K. Chathoth

2017-01-01

Over the past decade, the advent of new technology has brought about the emergence of smart cities aiming to provide their stakeholders with technology-based solutions that are effective and efficient. Insofar as the objective of smart cities is to improve outcomes that are connected to people, systems and processes of businesses, government and other public- and private-sector entities, its main goal is to improve the quality of life of all residents. Accordingly, smart tourism has emerged o...

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

OpenAIRE

Song Zheng; Qi Zhang; Rong Zheng; Bi-Qin Huang; Yi-Lin Song; Xin-Chu Chen

2017-01-01

In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main ...

Smart homes, private homes? An empirical study of technology researchers' perceptions of ethical issues in developing smart-home health technologies.

Science.gov (United States)

Birchley, Giles; Huxtable, Richard; Murtagh, Madeleine; Ter Meulen, Ruud; Flach, Peter; Gooberman-Hill, Rachael

2017-04-04

Smart-home technologies, comprising environmental sensors, wearables and video are attracting interest in home healthcare delivery. Development of such technology is usually justified on the basis of the technology's potential to increase the autonomy of people living with long-term conditions. Studies of the ethics of smart-homes raise concerns about privacy, consent, social isolation and equity of access. Few studies have investigated the ethical perspectives of smart-home engineers themselves. By exploring the views of engineering researchers in a large smart-home project, we sought to contribute to dialogue between ethics and the engineering community. Either face-to-face or using Skype, we conducted in-depth qualitative interviews with 20 early- and mid-career smart-home researchers from a multi-centre smart-home project, who were asked to describe their own experience and to reflect more broadly about ethical considerations that relate to smart-home design. With participants' consent, interviews were audio-recorded, transcribed and analysed using a thematic approach. Two overarching themes emerged: in 'Privacy', researchers indicated that they paid close attention to negative consequences of potential unauthorised information sharing in their current work. However, when discussing broader issues in smart-home design beyond the confines of their immediate project, researchers considered physical privacy to a lesser extent, even though physical privacy may manifest in emotive concerns about being watched or monitored. In 'Choice', researchers indicated they often saw provision of choice to end-users as a solution to ethical dilemmas. While researchers indicated that choices of end-users may need to be restricted for technological reasons, ethical standpoints that restrict choice were usually assumed and embedded in design. The tractability of informational privacy may explain the greater attention that is paid to it. However, concerns about physical privacy may

Universal standard for the smart energy home

International Nuclear Information System (INIS)

Hatler, M.

2009-01-01

Smart metering systems are now being installed in countries throughout the world. This article discussed technologies designed to connect in-home electrical devices such as thermostats, energy displays, and computers to the electricity grid. The smart-grid connected devices will form part of the home area network (HAN) designed to provide consumers with real time control of their energy use. Many governments are now mandating the use of HAN interfaces, and members of the energy industry are developing global standards for HANs. Within 5 years, it is estimated that over 126 million smart meters will be installed in households worldwide. Using HANs, consumers will be able to shift their usage away from peak energy usage times that are more expensive. Studies have demonstrated that the use of dynamic pricing options can result in a 50 per cent load reduction during critical peak periods. A universal standard and certification process is currently underway to prevent HAN market fragmentation and to ensure plug-and-play interoperability among HAN devices. It was concluded that the smart energy home will present large market opportunities for software developers, investors, and manufacturers. 1 fig

Autonomous Multicamera Tracking on Embedded Smart Cameras

Directory of Open Access Journals (Sweden)

Bischof Horst

2007-01-01

Full Text Available There is currently a strong trend towards the deployment of advanced computer vision methods on embedded systems. This deployment is very challenging since embedded platforms often provide limited resources such as computing performance, memory, and power. In this paper we present a multicamera tracking method on distributed, embedded smart cameras. Smart cameras combine video sensing, processing, and communication on a single embedded device which is equipped with a multiprocessor computation and communication infrastructure. Our multicamera tracking approach focuses on a fully decentralized handover procedure between adjacent cameras. The basic idea is to initiate a single tracking instance in the multicamera system for each object of interest. The tracker follows the supervised object over the camera network, migrating to the camera which observes the object. Thus, no central coordination is required resulting in an autonomous and scalable tracking approach. We have fully implemented this novel multicamera tracking approach on our embedded smart cameras. Tracking is achieved by the well-known CamShift algorithm; the handover procedure is realized using a mobile agent system available on the smart camera network. Our approach has been successfully evaluated on tracking persons at our campus.

Complex IoT Systems as Enablers for Smart Homes in a Smart City Vision.

Science.gov (United States)

Lynggaard, Per; Skouby, Knud Erik

2016-11-02

The world is entering a new era, where Internet-of-Things (IoT), smart homes, and smart cities will play an important role in meeting the so-called big challenges. In the near future, it is foreseen that the majority of the world's population will live their lives in smart homes and in smart cities. To deal with these challenges, to support a sustainable urban development, and to improve the quality of life for citizens, a multi-disciplinary approach is needed. It seems evident, however, that a new, advanced Information and Communications Technology ICT infrastructure is a key feature to realize the "smart" vision. This paper proposes a specific solution in the form of a hierarchical layered ICT based infrastructure that handles ICT issues related to the "big challenges" and seamlessly integrates IoT, smart homes, and smart city structures into one coherent unit. To exemplify benefits of this infrastructure, a complex IoT system has been deployed, simulated and elaborated. This simulation deals with wastewater energy harvesting from smart buildings located in a smart city context. From the simulations, it has been found that the proposed infrastructure is able to harvest between 50% and 75% of the wastewater energy in a smart residential building. By letting the smart city infrastructure coordinate and control the harvest time and duration, it is possible to achieve considerable energy savings in the smart homes, and it is possible to reduce the peak-load for district heating plants.

Smart City Planning

DEFF Research Database (Denmark)

Ekman, Ulrik

2018-01-01

This article reflects on the challenges for urban planning posed by the emergence of smart cities in network societies. In particular, it reflects on reductionist tendencies in existing smart city planning. Here the concern is with the implications of prior reductions of complexity which have been...... undertaken by placing primacy in planning on information technology, economical profit, and top-down political government. Rather than pointing urban planning towards a different ordering of these reductions, this article argues in favor of approaches to smart city planning via complexity theory....... Specifically, this article argues in favor of approaching smart city plans holistically as topologies of organized complexity. Here, smart city planning is seen as a theory and practice engaging with a complex adaptive urban system which continuously operates on its potential. The actualizations in the face...

The legal framework for data privacy and protection in smart metering and smart grids; Der Rechtsrahmen beim Datenschutz fuer Smart Metering und Smart Grids

Energy Technology Data Exchange (ETDEWEB)

Stamm, Markus [Alcatel-Lucent Deutschland AG, Nuernberg (Germany)

2011-07-01

The legal framework for data privacy and protection in Smart Meter and Smart Grid applications has been substantially changed through modifications of the German law on the supply of electricity and gas (Energiewirtschaftsgesetz - EnWG), especially through its sections 21c et seq. Nonetheless, these modifications have on partially attained the goal of the reform, to create a secure legal framework for the use of Smart Meters and Smart Grids, and some of the newly introduced regulations actually decrease the security of the framework through the use of systematically incorrect terminology. This article gives an overview of the content of the key regulations and the issues to be resolved which result from them. (orig.)

Systems Maintenance Automated Repair Tasks (SMART)

Science.gov (United States)

Schuh, Joseph; Mitchell, Brent; Locklear, Louis; Belson, Martin A.; Al-Shihabi, Mary Jo Y.; King, Nadean; Norena, Elkin; Hardin, Derek

2010-01-01

SMART is a uniform automated discrepancy analysis and repair-authoring platform that improves technical accuracy and timely delivery of repair procedures for a given discrepancy (see figure a). SMART will minimize data errors, create uniform repair processes, and enhance the existing knowledge base of engineering repair processes. This innovation is the first tool developed that links the hardware specification requirements with the actual repair methods, sequences, and required equipment. SMART is flexibly designed to be useable by multiple engineering groups requiring decision analysis, and by any work authorization and disposition platform (see figure b). The organizational logic creates the link between specification requirements of the hardware, and specific procedures required to repair discrepancies. The first segment in the SMART process uses a decision analysis tree to define all the permutations between component/ subcomponent/discrepancy/repair on the hardware. The second segment uses a repair matrix to define what the steps and sequences are for any repair defined in the decision tree. This segment also allows for the selection of specific steps from multivariable steps. SMART will also be able to interface with outside databases and to store information from them to be inserted into the repair-procedure document. Some of the steps will be identified as optional, and would only be used based on the location and the current configuration of the hardware. The output from this analysis would be sent to a work authoring system in the form of a predefined sequence of steps containing required actions, tools, parts, materials, certifications, and specific requirements controlling quality, functional requirements, and limitations.

Starry messages: Searching for signatures of interstellar archaeology

Energy Technology Data Exchange (ETDEWEB)

Carrigan, Richard A., Jr.; /Fermilab

2009-12-01

Searching for signatures of cosmic-scale archaeological artifacts such as Dyson spheres or Kardashev civilizations is an interesting alternative to conventional SETI. Uncovering such an artifact does not require the intentional transmission of a signal on the part of the original civilization. This type of search is called interstellar archaeology or sometimes cosmic archaeology. The detection of intelligence elsewhere in the Universe with interstellar archaeology or SETI would have broad implications for science. For example, the constraints of the anthropic principle would have to be loosened if a different type of intelligence was discovered elsewhere. A variety of interstellar archaeology signatures are discussed including non-natural planetary atmospheric constituents, stellar doping with isotopes of nuclear wastes, Dyson spheres, as well as signatures of stellar and galactic-scale engineering. The concept of a Fermi bubble due to interstellar migration is introduced in the discussion of galactic signatures. These potential interstellar archaeological signatures are classified using the Kardashev scale. A modified Drake equation is used to evaluate the relative challenges of finding various sources. With few exceptions interstellar archaeological signatures are clouded and beyond current technological capabilities. However SETI for so-called cultural transmissions and planetary atmosphere signatures are within reach.

Digital Omotenashi: Toward a Smart Tourism Design Systems

Directory of Open Access Journals (Sweden)

Chaeyoung Lim

2017-11-01

Full Text Available The tourism industry is currently facing many challenges; one of the main challenges is the lack of having smart tourism systems that make use of the recent advances in information and communication technology. Another challenge is designing such smart tourism systems while embracing diversified tourists’ sustainable values of experience (functional values, social values, emotional values, and epistemic values. In light of these challenges, the overall objective of this work is to design a smart tourism experience-centered system that considers social and technical perspectives. The Socio-Technical Systems theory was adopted as a theoretical foundation, and the Design Science Research methodology was used to develop a smart tourism system and a practical design artifact. A case study from the Japanese tourism context was studied by exploring tourists’ sustainable values of experiences and local staffs’ behaviors. The main problem was the dysfunctional communication between local service staffs and foreign tourists during the service process. After identifying the problem and the objectives, a relevant smart tourism system was synthesized and tested as a design artifact. The results of the utility test of the proposed artifact showed its effectiveness and efficiency in facilitating the service process and in creating multi-dimensional values of experience.

An Enhanced Data Integrity Model In Mobile Cloud Environment Using Digital Signature Algorithm And Robust Reversible Watermarking

Directory of Open Access Journals (Sweden)

Boukari Souley

2017-10-01

Full Text Available the increase use of hand held devices such as smart phones to access multimedia content in the cloud is increasing with rise and growth in information technology. Mobile cloud computing is increasingly used today because it allows users to have access to variety of resources in the cloud such as image video audio and software applications with minimal usage of their inbuilt resources such as storage memory by using the one available in the cloud. The major challenge faced with mobile cloud computing is security. Watermarking and digital signature are some techniques used to provide security and authentication on user data in the cloud. Watermarking is a technique used to embed digital data within a multimedia content such as image video or audio in order to prevent authorized access to those content by intruders whereas digital signature is used to identify and verify user data when accessed. In this work we implemented digital signature and robust reversible image watermarking in order enhance mobile cloud computing security and integrity of data by providing double authentication techniques. The results obtained show the effectiveness of combining the two techniques robust reversible watermarking and digital signature by providing strong authentication to ensures data integrity and extract the original content watermarked without changes.

An organization structure analysis for BC Hydro, Power Smart

OpenAIRE

Lellis, Leandro Bianchi

2006-01-01

Power Smart is BC Hydro’s demand-side management (DMS) initiative to encourage energy efficiency by its customers. Currently, they are in the midst of a very significant program redesign to influence their largest transmission voltage customers to use energy efficiently without the capability to award a capital incentive. From their internal operating model perspective, Power Smart is considering moving from an audit based function to a more consultative role. This project aims to provide and...

Towards an urban planners’ perspective on Smart City

Directory of Open Access Journals (Sweden)

Rocco Papa

2013-04-01

Full Text Available The concept of “Smart City”, providing a solution for making cities more efficient and sustainable, has been quite popular in recent years, encouraging reflections, ideas, researches and projects for a “smart” urban development. A smart city is generally meant as a city capable of joining “competitiveness” and “sustainability”, by integrating different dimensions of development and addressing infrastructural investments able to support economic growth as well as the quality of life of communities, a more careful management of natural resources, a greater transparency and participation to decision-making processes. Based on those assumptions, this contribution tackle the controversial subject of Smart City, starting from the review of the scientific Italian and international literature that, from the Eighties to the Nineties, has been largely focused on ICTs and their impacts on urban development. Then, the focus shifts on the large debate on smart cities that has been developing from the beginning of 2000s and on the numerous institutional initiatives up to now implemented by the European Union for building up the Smart City. Finally, the article highlights how, despite these efforts, a shared definition of the term is still missing and current approaches to the issue are still very heterogeneous; it emphasizes, on the opposite, the key-role that urban planning, grounding on a holistic approach to cities’ development, should play in coordinating and integrating urban policies addressed to building up a Smart City.

Smart City project

KAUST Repository

Al Harbi, Ayman

2018-01-24

A \\'smart city\\' is an urban region that is highly advanced in terms of overall infrastructure, sustainable real estate, communications and market viability. It is a city where information technology is the principal infrastructure and the basis for providing essential services to residents. Yanbu Industrial City- Smart City Project - First large scale smart city in The kingdom.

Smart City Analytics: state of the art and future perspectives

Directory of Open Access Journals (Sweden)

Carlo Giovannella

2014-05-01

Full Text Available In accordance with a 'people centred' vision, this paper critically examines current approaches to smart cities benchmarking. In particular, by means of correlation analysis and Principal Component Analysis (PCA we put in evidence present limitations of city rankings and, as well, the emergence of different perspectives for data interpretations. To follow, a possible redesign of the 'Smart Cities Analytics' grounded on the traces left by individuals, is suggested. In particular, as an example, we focus on the potentiality offered by automatic text analysis to extract people perceptions and expectations that, in turns, demonstrate the need to integrate bottom-up and top-down approaches to city benchmarking. Finally a novel definition of smart city based on the territorial state of flow is proposed and, as a consequence, a novel path toward smart city benchmarking suggested.

Smart infrastructure design for Smart Cities

OpenAIRE

OTA, Kaoru; KUMRAI, Teerawat; DONG, Mianxiong; KISHIGAMI, Jay (Junichi); GUO, Minyi

2017-01-01

Intelligent Transportation Systems (ITS) is one of the keywords to describe smart cities, aiming at efficient public transport, smart parking, enhanced road safety, intelligent traffic management, onvehicle entertainment, and so on. In ITS, Roadside Unit (RSU) deployment should be well-designed due to it serves as a service provider and a gateway to the Internet for vehicular users. In this article, we propose an RSU deployment strategy which maximizes the communication coverage and reduces t...

Managing Emergency Situations in the Smart City: The Smart Signal

Directory of Open Access Journals (Sweden)

Ángel Asensio

2015-06-01

Full Text Available In a city there are numerous items, many of them unnoticed but essential; this is the case of the signals. Signals are considered objects with reduced technological interest, but in this paper we prove that making them smart and integrating in the IoT (Internet of Things could be a relevant contribution to the Smart City. This paper presents the concept of Smart Signal, as a device conscious of its context, with communication skills, able to offer the best message to the user, and as a ubiquitous element that contributes with information to the city. We present the design considerations and a real implementation and validation of the system in one of the most challenging environments that may exist in a city: a tunnel. The main advantages of the Smart Signal are the improvement of the actual functionality of the signal providing new interaction capabilities with users and a new sensory mechanism of the Smart City.

Managing Emergency Situations in the Smart City: The Smart Signal.

Science.gov (United States)

Asensio, Ángel; Blanco, Teresa; Blasco, Rubén; Marco, Álvaro; Casas, Roberto

2015-06-18

In a city there are numerous items, many of them unnoticed but essential; this is the case of the signals. Signals are considered objects with reduced technological interest, but in this paper we prove that making them smart and integrating in the IoT (Internet of Things) could be a relevant contribution to the Smart City. This paper presents the concept of Smart Signal, as a device conscious of its context, with communication skills, able to offer the best message to the user, and as a ubiquitous element that contributes with information to the city. We present the design considerations and a real implementation and validation of the system in one of the most challenging environments that may exist in a city: a tunnel. The main advantages of the Smart Signal are the improvement of the actual functionality of the signal providing new interaction capabilities with users and a new sensory mechanism of the Smart City.

Visually-aided smart kitchen environment for elderly suffering from dementia

OpenAIRE

Li, Y. (Yahui)

2013-01-01

Abstract This thesis was part of smart kitchen project, it aimed to use current technology to facilitate senior citizens with mild dementia’s cooking process in the kitchen. As different senior citizens with mild dementia had different living habit and kitchen environment, smart kitchen had context aware and learning ability to adapt itself to fit senior citizens with mild dementia’s habit and living condition to assist the...

Smart City for a Sustainable Future: Is Delhi Ready?

Directory of Open Access Journals (Sweden)

Anindita Roy Saha

2017-02-01

Full Text Available Cities are the geographic nodes around which people gather for their livelihood activities. Various factors like resources, technology, education, medical innovations and environmental developments have shaped modern cities. However, with rapid urbanization and population growth, many cities are facing the problems of degradation, pollution, diseases and a poor quality of life. The major challenges before the urban growth centers have necessitated the formation of smart cities. Sustainable future of a city lies in the development of transport, infrastructure, environment, energy, ICT and people with a sustainability approach. The Government of India has launched a scheme to create hundred smart cities across the country, among which the National Capital of Delhi is a frontrunner. This paper attempts to study the existing infrastructure and facilities in Delhi in order to assess its readiness to be a smart city. It also attempts to analyze the citizens’ perception about Delhi as a smart city through a primary survey. Although there are limitations in the current scenario of economic and environmental performances and people’s perceptions, Delhi makes a strong case for becoming a smart city.

New Liquid Crystal Smart Window and its Production Process (SmartWin II)

DEFF Research Database (Denmark)

Jensen, Karsten Ingerslev

2005-01-01

the operating modes don’t require energy consumption and where the transition from one to the other mode is fast (10 ms) thanks to an applied voltage or voltage pulse, 4) allowing a high solar factor modulation; a Solar Heat Gain Factor (SHGS) between 0.3 and 0.8.and a high daylight modulation between 0.1 and 0.......8, 5) with a good lifetime. The outcome of the project was: Several methods were developed and these allowed improving and realisation a number of lab-scale size (from 2 cm sq. up to 15 cm x 30 cm), active films with three optical states (clear, reflective or scattering state) to three original...... as well as realisation and scaling-up of switch-able patterned glass samples for smart windows. A market assessment study of smart windows have been carried out and by taking into account e.g. the fenestration markets, functionality and cost of currently available daylight systems, and it shows a very...

Smart Home, Smart Grid, Smart Meter - digitale Konzepte und das Recht an Daten

Science.gov (United States)

Spiecker genannt Döhmann, Indra

Modernes Energiemanagement setzt auf ein intelligent gesteuertes Energieinformationsnetz, das Smart Grid. In diesem ist der Smart Meter, die intelligente Messstelle beim Nutzer, ein zentrales Instrument für den wechselseitigen Austausch von Informationen. Allerdings werfen die über diverse Gesetze forcierten Informationsströme erhebliche datenschutzrechtliche Fragen auf. Der Beitrag stellt zentrale datenschutzrechtliche Leitlinien und Probleme vor und behandelt auch offene Fragestellungen.

Educating the smart city: Schooling smart citizens through computational urbanism

Directory of Open Access Journals (Sweden)

Ben Williamson

2015-11-01

Full Text Available Coupled with the ‘smart city’, the idea of the ‘smart school’ is emerging in imaginings of the future of education. Various commercial, governmental and civil society organizations now envisage education as a highly coded, software-mediated and data-driven social institution. Such spaces are to be governed through computational processes written in computer code and tracked through big data. In an original analysis of developments from commercial, governmental and civil society sectors, the article examines two interrelated dimensions of an emerging smart schools imaginary: (1 the constant flows of digital data that smart schools depend on and the mobilization of analytics that enable student data to be used to anticipate and shape their behaviours; and (2 the ways that young people are educated to become ‘computational operatives’ who must ‘learn to code’ in order to become ‘smart citizens’ in the governance of the smart city. These developments constitute an emerging educational space fabricated from intersecting standards, technologies, discourses and social actors, all infused with the aspirations of technical experts to govern the city at a distance through both monitoring young people as ‘data objects’ and schooling them as active ‘computational citizens’ with the responsibility to compute the future of the city.

Signature-based User Authentication

OpenAIRE

Hámorník, Juraj

2015-01-01

This work aims on missing handwritten signature authentication in Windows. Result of this work is standalone software that allow users to log into Windows by writing signature. We focus on security of signature authentification and best overall user experience. We implemented signature authentification service that accept signature and return user access token if signature is genuine. Signature authentification is done by comparing given signature to signature patterns by their similarity. Si...

IoT Smart Home Adoption: The Importance of Proper Level Automation

Directory of Open Access Journals (Sweden)

Heetae Yang

2018-01-01

Full Text Available The word “smart” has been used in various fields and is widely accepted to mean intelligence. Smart home service, one of the representative emerging technologies in the IoT era, has changed house equipment into being more intelligent, remote controllable, and interconnected. However, the intelligence and controllability of a smart home service are contradictory concepts, under certain aspects. In addition, the level of intelligence or controllability of a smart home service that users want may differ according to the user. As potential users of smart home services have diversified in recent years, providing the appropriate functions and features is critical to the diffusion of the service. Thus, this study examines the smart home service features that current users require and empirically evaluates the relationship between the critical factors and the adoption behavior with 216 samples from Korea. The moderating effect of personal characteristics on behavior is also tested. The results of the analysis provide various theoretical and practical implications.

Dubai: A Pioneer Smart City in the Arabian Territory

Science.gov (United States)

Virtudes, Ana; Abbara, Arwa; Sá, João

2017-10-01

Nowadays, one of the main issues that the cities are facing is related with how they are dealing with the challenges toward smartness, including infrastructures, economic, social and environmental aspects. In this sense, some of the current challenges on the global scale, trying to find solutions regarding urban societies, are based on the concept of “smart city”. Therefore, is clear that new ideas regarding the cities improvements, which are on the top of global agenda, could be found at the concept of “smart city”. As the literature reveals, this is a topic reason among the researchers, which is in a continuous development, in particular regarding societies, countries or regions where it is emerging, such as in the Arabian territories. Dubai, a city in the United Arab Emirates, is an example where in a short period of time, after the oil discovery in the decade of 1970, one small and badly known urban settlement became a pioneer reference in terms of smart cities requirements. Thus, this article presents background information about smart cities, their assets and key pillars, their smart infrastructures and features in cultural, social and environmental terms. The main goals are based on a theoretical approach, developed in order to get more details about smart cities, regarding the features of the Arabian territories. It argues around the case of Dubai, as a pioneer smart city in the Arab world. Among of the main conclusions, there is the idea that the urban transformation process in contemporary societies to secure the smartness, should apply to the use of ICT / information and communication technologies. This use will increase the efficiency concerns to the natural resources, and provide a high quality of life for citizens. The example of Dubai has shown that the decision-makers have built each sector and part of the city in a solid performance, in order to achieve the smart sustainability concept. This city is nowadays a reference on this matter, not

Updating the U.S. SMART dispersant efficacy monitoring protocol

International Nuclear Information System (INIS)

Trudel, K.; Belore, R.; VanHaverbeke, M.; Mullin, J.

2009-01-01

The Special Monitoring of Applied Response Technologies (SMART) is a written dispersant effectiveness monitoring protocol developed in the United States in the mid 1990s. It has been the subject of considerable review and research since its development. This paper reported on the 2007-2008 review of the SMART dispersant effectiveness monitoring protocol which involved the following 3 tasks: (1) stakeholders reviewed their experience with SMART and identified the key deficiencies in the current protocol, (2) the SMART monitoring experience gathered during dispersant effectiveness testing at the Ohmsett National Oil Spill Response Test Facility was reviewed to evaluate the usefulness of existing SMART decision criteria, (3) available commercial off-the-shelf instruments (COTS) were surveyed to identify the instruments that might be more effective or simpler to use than those presently in use. The review concluded that the three-tiered approach in SMART was appropriate, but better guidance was needed for users. In addition, the fluorometer historically used for monitoring of dispersed oil was found to have several operating challenges and should be replaced with more modern equipment. It was recommended that all U.S. government sponsored monitoring teams work with identical instruments and operating protocols. The COTS survey identified 6 potentially suitable submersible and field-portable fluorometers and three particle-size analyzers. 26 refs., 5 tabs., 1 fig

A smart-card-enabled privacy preserving E-prescription system.

Science.gov (United States)

Yang, Yanjiang; Han, Xiaoxi; Bao, Feng; Deng, Robert H

2004-03-01

Within the overall context of protection of health care information, privacy of prescription data needs special treatment. First, the involvement of diverse parties, especially nonmedical parties in the process of drug prescription complicates the protection of prescription data. Second, both patients and doctors have privacy stakes in prescription, and their privacy should be equally protected. Third, the following facts determine that prescription should not be processed in a truly anonymous manner: certain involved parties conduct useful research on the basis of aggregation of prescription data that are linkable with respect to either the patients or the doctors; prescription data has to be identifiable in some extreme circumstances, e.g., under the court order for inspection and assign liability. In this paper, we propose an e-prescription system to address issues pertaining to the privacy protection in the process of drug prescription. In our system, patients' smart cards play an important role. For one thing, the smart cards are implemented to be portable repositories carrying up-to-date personal medical records and insurance information, providing doctors instant data access crucial to the process of diagnosis and prescription. For the other, with the secret signing key being stored inside, the smart card enables the patient to sign electronically the prescription pad, declaring his acceptance of the prescription. To make the system more realistic, we identify the needs for a patient to delegate his signing capability to other people so as to protect the privacy of information housed on his card. A strong proxy signature scheme achieving technologically mutual agreements on the delegation is proposed to implement the delegation functionality.

Smart Inverter Control and Operation for Distributed Energy Resources

Science.gov (United States)

Tazay, Ahmad F.

the microgrid as well as solve specific issues of connecting the microgrid to the system. A detailed procedure for controlling VSC and designing an optimal operation of the controller is also covered in the first part of the dissertation. This section provides an optimal operation for controlling motor drive and demonstrates issues when motor load exists at an autonomous microgrid. It also provides a solution for specific issues at operating a microgrid at autonomous mode as well as improving the structural design for the grid-tied microgrid. The solution for autonomous microgrid includes changing the operational state of the switching pattern of the smart inverter to solve the issue of a common mode voltage (CMV) that appears across the motor load. It also solves the issue of power supplying to large loads, such as induction motors. The last section of the low-level section involves an improvement of the performance and operation of the PV charging station for a plug-in hybrid electric vehicle (PHEV) at grid-tied mode. This section provides a novel structure and smart controller for PV charging station using three-phase hybrid boost converter topology. It also provides a form of applications of a multifunction smart inverter using PV charging station. The second part of the research is focusing on improving the performance of the microgrid by integrating several smart inverters to form a microgrid. It investigates the issue of connecting DER units with the microgrid at real applications. One of the common issues of the microgrid is the circulating current which is caused by poor reactive power sharing accuracy. When more than two DER units are connected in parallel, a microgrid is forming be generating required power for the load. When the microgrid is operated at autonomous mode, all DER units participate in generating voltage and frequency as well as share the load's power. This section provides a smart and novel controlling technique to solve the issue of unequal

Conversion of SMART I. Zur Konvertierung von SMART I

Energy Technology Data Exchange (ETDEWEB)

Argyris, J H; Szimmat, J; William, K J [Stuttgart Univ. (TH) (Germany, F.R.). Inst. fuer Statik und Dynamik der Luft- und Raumfahrtkonstruktionen

1977-01-01

The report describes the conversion of the programming system SMART I on CDC, UNIVAC and IBM computers under the BMFT grant RK 21 I/SBB 31. There were four tasks for the development of a machine-independent SMART-version: a) Updating of the CDC source library (ca. 180.000 Fortran statements); b) Conversion into double precision; c) Primary installation on UNIVAC; d) Primary installation on IBM. The conversion of the SMART I program was carried out in cooperation with the consulting firms RIB, Stuttgart, and IKOSS Stuttgart, under the leadership of ISD.

Smart Cutting Tools and Smart Machining: Development Approaches, and Their Implementation and Application Perspectives

Science.gov (United States)

Cheng, Kai; Niu, Zhi-Chao; Wang, Robin C.; Rakowski, Richard; Bateman, Richard

2017-09-01

Smart machining has tremendous potential and is becoming one of new generation high value precision manufacturing technologies in line with the advance of Industry 4.0 concepts. This paper presents some innovative design concepts and, in particular, the development of four types of smart cutting tools, including a force-based smart cutting tool, a temperature-based internally-cooled cutting tool, a fast tool servo (FTS) and smart collets for ultraprecision and micro manufacturing purposes. Implementation and application perspectives of these smart cutting tools are explored and discussed particularly for smart machining against a number of industrial application requirements. They are contamination-free machining, machining of tool-wear-prone Si-based infra-red devices and medical applications, high speed micro milling and micro drilling, etc. Furthermore, implementation techniques are presented focusing on: (a) plug-and-produce design principle and the associated smart control algorithms, (b) piezoelectric film and surface acoustic wave transducers to measure cutting forces in process, (c) critical cutting temperature control in real-time machining, (d) in-process calibration through machining trials, (e) FE-based design and analysis of smart cutting tools, and (f) application exemplars on adaptive smart machining.

Cyber-security in smart cities: The case of Dubai

OpenAIRE

Efthymiopoulos, Marios-Panagiotis

2016-01-01

The city of Dubai emerges as a leading partner in not only technology innovation but also designed infrastructure and strategic security. There is a strategy, which will globally add the city and leadership to the leading smart cities of the world. Considering current and future challenges, the strategic aim is to "smart" wire the city of Dubai by 2020. Dubai is a city of strategic technology, innovation and management. It is a global, vibrant and emerging economy among others, that can becom...

The Internet- and Digital Signature-Based Prescription Order Communication System Using Synchronized Smart Cards in the 2-Way Type Terminal

National Research Council Canada - National Science Library

Song, Won

2001-01-01

...) based on the Internet between the hospital and the pharmacy, on the public-key infrastructure, and on the concurrently parallel co-operation with both medical professional's and patient's smart cards...

Smart city discourse as place-making boundary experience in Aalborg East

DEFF Research Database (Denmark)

Engberg, Lars A.

in collaboration with the council. Discursively stakeholders articulate ‘smart’ as proactive system integration in domains that relate to sustainable urban development, like mobility infrastructure, green retrofitting of social housing, smart-grid solutions, the construction of a ‘super’ hospital, university......In 2013 the newly elected mayor in the Danish city of Aalborg campaigned to make the Aalborg East district a new ‘test field’ for smart city solutions and projects. Together with Aalborg City Council key stakeholders in the area agree to promote ‘smart city’ thinking and initiatives...... campus improvements etc. Substantial resources are currently invested in place-making projects, and stakeholders wish to explore integrated value creation opportunities. Ultimately, the smart city proponents aim to turn a relatively disadvantaged fringe area into a green growth district that creates...

Overview Smart Hotel di Indonesia yang Merupakan Trend Baru dalam Industri Perhotelan

Directory of Open Access Journals (Sweden)

Maria Pia Adiati

2011-11-01

Full Text Available Nowadays we can find out many taglines featuring the word Smart Hotel or Smart Traveler. Smart traveler is those who travel in a smart way. We called it smart because they choose the accomodation and the transportation wisely, in accordance with requirements and budget. Meanwhile Smart Hotel tagline comes up since there are many smart travelers who travel a lot to the cities around the world. Smart Hotels are hotels who try to accommodate the current market demands. The latest trend for the travelers is only a clean and comfort accommodation with affordable price but covers all the basic things needed for the travelers. Nowadays, travelers pass most of the time out of the hotel for doing business or either for visiting tourism objects. Typical smart hotels are hotels with 2 stars or 3 stars rating. Even though it is 2 or 3 star hotel, the service is as good as the higher ratings.Some of the hotel management or hotel group try to suite the demand by releasing 2 star or 3 star brand. And in the future, the 2 star or 3 star hotel is the hotel who will rapidly grow and take the majority market since the price is affordable and suites the budget. 

Smart city networks through the internet of things

CERN Document Server

Pardalos, Panos

2017-01-01

This book both analyzes and synthesizes new cutting-edge theories and methods for future design implementations in smart cities through interdisciplinary synergizing of architecture, technology, and the Internet of Things (IoT). Implementation of IoT enables the collection and data exchange of objects embedded with electronics, software, sensors, and network connectivity. Recently IoT practices have moved into uniquely identifiable objects that are able to transfer data directly into networks. This book features new technologically advanced ideas, highlighting properties of smart future city networks. Chapter contributors include theorists, computer scientists, mathematicians, and interdisciplinary planners, who currently work on identifying theories, essential elements, and practices where the IoT can impact the formation of smart cities and sustainability via optimization, network analyses, data mining, mathematical modeling and engineering. Moreover, this book includes research-based theories and real wo...

Smart market. From smart grid to the intelligent energy market

International Nuclear Information System (INIS)

Aichele, Christian; Doleski, Oliver D.

2014-01-01

Dare more market. - The design of this postulate provides an important contribution to the success of the German energy transition. The Bundesnetzagentur has shown with its highly regarded benchmark paper on smart grids and markets leads the way towards more market in the energy sector. The therein required differentiation in a network and market sphere contributes to greater transparency on the consumer side and enables a gid releaving shift in energy consumption. The book focuses on actors and roles in the modified market circumstances as well as components and products of a future Smart Markets. Finally, to the reader concrete business models are offered. Authors from science and practice give in this book answers on how the interaction of Smart Grid and Smart Market works. [de

Smart logistics

NARCIS (Netherlands)

Woensel, van T.

2012-01-01

This lecture focuses on Smart Logistics referring to these intelligent managerial decisions related to the design, operations and control of the transportation chain processes in an efficient and cost-effective way. The starting point for Smart Logistics is the key observation that the real-life

Complex IoT Systems as Enablers for Smart Homes in a Smart City Vision

Directory of Open Access Journals (Sweden)

Per Lynggaard

2016-11-01

Full Text Available The world is entering a new era, where Internet-of-Things (IoT, smart homes, and smart cities will play an important role in meeting the so-called big challenges. In the near future, it is foreseen that the majority of the world’s population will live their lives in smart homes and in smart cities. To deal with these challenges, to support a sustainable urban development, and to improve the quality of life for citizens, a multi-disciplinary approach is needed. It seems evident, however, that a new, advanced Information and Communications Technology ICT infrastructure is a key feature to realize the “smart” vision. This paper proposes a specific solution in the form of a hierarchical layered ICT based infrastructure that handles ICT issues related to the “big challenges” and seamlessly integrates IoT, smart homes, and smart city structures into one coherent unit. To exemplify benefits of this infrastructure, a complex IoT system has been deployed, simulated and elaborated. This simulation deals with wastewater energy harvesting from smart buildings located in a smart city context. From the simulations, it has been found that the proposed infrastructure is able to harvest between 50% and 75% of the wastewater energy in a smart residential building. By letting the smart city infrastructure coordinate and control the harvest time and duration, it is possible to achieve considerable energy savings in the smart homes, and it is possible to reduce the peak-load for district heating plants.

Smart grid as a service: a discussion on design issues.

Science.gov (United States)

Chao, Hung-Lin; Tsai, Chen-Chou; Hsiung, Pao-Ann; Chou, I-Hsin

2014-01-01

Smart grid allows the integration of distributed renewable energy resources into the conventional electricity distribution power grid such that the goals of reduction in power cost and in environment pollution can be met through an intelligent and efficient matching between power generators and power loads. Currently, this rapidly developing infrastructure is not as "smart" as it should be because of the lack of a flexible, scalable, and adaptive structure. As a solution, this work proposes smart grid as a service (SGaaS), which not only allows a smart grid to be composed out of basic services, but also allows power users to choose between different services based on their own requirements. The two important issues of service-level agreements and composition of services are also addressed in this work. Finally, we give the details of how SGaaS can be implemented using a FIPA-compliant JADE multiagent system.

Towards a smart home framework

OpenAIRE

Alam, Muddasser; Alan, Alper; Rogers, Alex; Ramchurn, Sarvapali D.

2013-01-01

We present our Smart Home Framework (SHF) which simplifies the modelling, prototyping and simulation of smart infrastructure (i.e., smart home and smart communities). It provides the buildings blocks (e.g., home appliances) that can be extended and assembled together to build a smart infrastructure model to which appropriate AI techniques can be applied. This approach enables rapid modelling where new research initiatives can build on existing work.

Justification of the Utility of Introducing Smart Meters in Latvia

Science.gov (United States)

Kunickis, M.; Dandens, A.; Bariss, U.

2015-12-01

Automatic data reading from smart meters is being developed in many parts of the world, including Latvia. The key drivers for that are developments of smart technologies and economic benefits for consumers. Deployment of smart meters could be launched in a massive scale. Several pilot projects were implemented to verify the feasibility of smart meters for individual consumer groups. Preliminary calculations indicate that installation of smart meters for approximately 23 % of electricity consumers would be economically viable. Currently, the data for the last two years is available for an in-depth mathematical analysis. The continuous analysis of consumption data would be established, when more measurements from smart meters are available. The extent of introduction of smart meters should be specified during this process in order to gain the maximum benefit for the whole society (consumers, grid companies, state authorities), because there are still many uncertain and variable factors. For example, it is necessary to consider statistical load variations by hour, dependence of electricity consumption on temperature fluctuations, consumer behaviour and demand response to market signals to reduce electricity consumption in the short and long term, consumer's ambitions and capability to install home automation for regulation of electricity consumption. To develop the demand response, it is necessary to analyse the whole array of additional factors, such as expected cost reduction of smart meters, possible extension of their functionality, further development of information exchange systems, as well as standard requirements and different political and regulatory decisions regarding the reduction of electricity consumption and energy efficiency.

Gerontechnology for demented patients: smart homes for smart aging.

Science.gov (United States)

Frisardi, Vincenza; Imbimbo, Bruno P

2011-01-01

In an aging world, maintaining good health and independence for as long as possible is essential. Instead of hospitalization or institutionalization, the elderly with chronic conditions, especially those with cognitive impairment, can be assisted in their own environment with numerous 'smart' devices that support them in their activity of daily living. A "smart home" is a residence equipped with technology that facilitates monitoring of residents to improve quality of life and promote physical independence, as well as to reduce caregiver burden. Several projects worldwide have been conducted, but some ethical and legal issues are still unresolved and, at present, there is no evidence of the effects of smart homes on health outcomes. Randomized controlled trials are needed to understand the plus and minuses of these projects, but this will only be possible with a widespread proliferation and penetration of smart homes in the social network.

Comparison of Energy Consumption in Wi-Fi and Bluetooth Communication in a Smart Building

NARCIS (Netherlands)

Putra, Guntur; Rizky Pratama, Azkario; Lazovik, Aliaksandr; Aiello, Marco

2017-01-01

Modern Smart Buildings will utilize sensor technologies to obtain current information of the occupants and use it to provide automatic services to improve the safety, efficient use, productivity, and comfort. Energy saving is one of the promises of Smart Buildings. This can be achieved by

CreditCoin: A Privacy-Preserving Blockchain-Based Incentive Announcement Network for Communications of Smart Vehicles

KAUST Repository

Li, Lun

2018-01-23

The vehicular announcement network is one of the most promising utilities in the communications of smart vehicles and in the smart transportation systems. In general, there are two major issues in building an effective vehicular announcement network. First, it is difficult to forward reliable announcements without revealing users\\' identities. Second, users usually lack the motivation to forward announcements. In this paper, we endeavor to resolve these two issues through proposing an effective announcement network called CreditCoin, a novel privacy-preserving incentive announcement network based on Blockchain via an efficient anonymous vehicular announcement aggregation protocol. On the one hand, CreditCoin allows nondeterministic different signers (i.e., users) to generate the signatures and to send announcements anonymously in the nonfully trusted environment. On the other hand, with Blockchain, CreditCoin motivates users with incentives to share traffic information. In addition, transactions and account information in CreditCoin are tamper-resistant. CreditCoin also achieves conditional privacy since Trace manager in CreditCoin traces malicious users\\' identities in anonymous announcements with related transactions. CreditCoin thus is able to motivate users to forward announcements anonymously and reliably. Extensive experimental results show that CreditCoin is efficient and practical in simulations of smart transportation.

Smart metering. Conformance tests for electricity meters; Smart Metering. Konformitaetstests an Stromzaehlern

Energy Technology Data Exchange (ETDEWEB)

Bormann, Matthias; Pongratz, Siegfried [VDE Pruef- und Zertifizierungsinstitut, Offenbach (Germany)

2012-07-01

Introduction of communication technologies into today's energy network enables the interworking between the domains of smart metering, smart grid, smart home and e-mobility as well as the creation and provisioning of new innovative services such as efficient load adjustment. Due to this convergence the new energy networks are becoming increasingly complex. Ensuring the interworking between all network elements (e.g. electricity meters, gateways) in these smart energy networks is of utmost importance. To this end conformance and interoperability tests have to be defined to ensure that services work as expected. (orig.)

Real Traceable Signatures

Science.gov (United States)

Chow, Sherman S. M.

Traceable signature scheme extends a group signature scheme with an enhanced anonymity management mechanism. The group manager can compute a tracing trapdoor which enables anyone to test if a signature is signed by a given misbehaving user, while the only way to do so for group signatures requires revealing the signer of all signatures. Nevertheless, it is not tracing in a strict sense. For all existing schemes, T tracing agents need to recollect all N' signatures ever produced and perform RN' “checks” for R revoked users. This involves a high volume of transfer and computations. Increasing T increases the degree of parallelism for tracing but also the probability of “missing” some signatures in case some of the agents are dishonest.

An evaluation of selection criteria on primary water chemistry parameters for SMART

International Nuclear Information System (INIS)

Choi, B. S.; Kim, S. H.; Yun, J. H.; Bae, Y. Y.; Gee, S. G.

2003-01-01

The selection criteria on the primary water chemistry of SMART by comparing the chemical design features with those of the current operating PWRs is analyzed. The most essential differences in water chemistry between the PWRs and SMART reactor is characterized by the presence of boron in water. SMART is boron free reactor, and the ammonia is used as a pH reagent. In SMART reactor hydrogen gas is not added to the primary coolant, but is normally generated from the radiolysis of ammonia of the coolant passes through the core. Ammonia is added once per shift because SMART reactor has no letdown and charging system during power operation. Because of these competing processes, the concentrations of hydrogen, nitrogen and ammonia in the primary coolant are steady state concentrations, which depend on the decomposition/combination rate of ammonia. Ammonia chemistry in SMART reactor has many advantages in that no hydrogen gas injection is needed to control the dissolved oxygen in primary coolant because of spontaneous generation of hydrogen and nitrogen produced by the reaction of ammonia decomposition

Book-Smart, Not Street-Smart: Blockchain-Based Smart Contracts and The Social Workings of Law

Directory of Open Access Journals (Sweden)

Karen E. C. Levy

2017-02-01

Full Text Available This paper critiques blockchain-based “smart contracts,” which aim to automatically and securely execute obligations without reliance on a centralized enforcement authority. Though smart contracts do have some features that might serve the goals of social justice and fairness, I suggest that they are based on a thin conception of what law does, and how it does it. Smart contracts focus on the technical form of contract to the exclusion of the social contexts within which contracts operate, and the complex ways in which people use them. In the real world, contractual obligations are enforced through all kinds of social mechanisms other than formal adjudication—and contracts serve many functions that are not explicitly legal in nature, or even designed to be formally enforced. I describe three categories of contracting practices in which people engage (the inclusion of facially unenforceable terms, the inclusion of purposefully underspecified terms, and willful nonenforcement of enforceable terms to illustrate how contracts actually “work.” The technology of smart contracts neglects the fact that people use contracts as social resources to manage their relations. The inflexibility that they introduce, by design, might short-circuit a number of social uses to which law is routinely put. Therefore, I suggest that attention to the social and relational contexts of contracting are essential considerations for the discussion, development, and deployment of smart contracts.

The embedding convergence of smart cities and tourism internet of things in China: An advance perspective

Directory of Open Access Journals (Sweden)

Yang Guo

2014-06-01

Full Text Available The smart city strategy is an inevitable trend in the future development of Chinese cities. The smart tourism city is an important part and a practical attempt of the smart city strategy. The China National Tourism Administration has officially announced "Beautiful China: 2014 Year of Smart Travel" as tourism theme. Thus, huge development opportunities are in store for the future of smart tourism. This strategy attempts to combine the Internet of Things (IoT technology with the development of the smart tourism industry and smart tourism cities. Many Chinese scholars stated their ideas on the technological structure of IoT and the extension of smart tourism industries. At the same time, many Chinese cities have attempted to combine IoT and smart tourism. There is a trend of embedding Application of Tourism IoT in China’s Scenic Spots. Smart tourism should build an IoT information technology public platform, covering service management to marketing management. The emerging smart tourism industry fits China’s economic growth and industrial transformation. Based on these developments, this research determines the current status and development potential of smart tourism in China, and offers recommendations for their applications in China.

Biomarker Gene Signature Discovery Integrating Network Knowledge

Directory of Open Access Journals (Sweden)

Holger Fröhlich

2012-02-01

Full Text Available Discovery of prognostic and diagnostic biomarker gene signatures for diseases, such as cancer, is seen as a major step towards a better personalized medicine. During the last decade various methods, mainly coming from the machine learning or statistical domain, have been proposed for that purpose. However, one important obstacle for making gene signatures a standard tool in clinical diagnosis is the typical low reproducibility of these signatures combined with the difficulty to achieve a clear biological interpretation. For that purpose in the last years there has been a growing interest in approaches that try to integrate information from molecular interaction networks. Here we review the current state of research in this field by giving an overview about so-far proposed approaches.

Signature Balancing

NARCIS (Netherlands)

Noordkamp, H.W.; Brink, M. van den

2006-01-01

Signatures are an important part of the design of a ship. In an ideal situation, signatures must be as low as possible. However, due to budget constraints it is most unlikely to reach this ideal situation. The arising question is which levels of signatures are optimal given the different scenarios

Smart Circuit Breaker Communication Infrastructure

Directory of Open Access Journals (Sweden)

Octavian Mihai MACHIDON

2017-11-01

Full Text Available The expansion of the Internet of Things has fostered the development of smart technologies in fields such as power transmission and distribution systems (as is the Smart Grid and also in regard to home automation (the Smart Home concept. This paper addresses the network communication infrastructure for a Smart Circuit Breaker system, a novel application at the edge of the two afore-mentioned systems (Smart Grid and Smart Home. Such a communication interface has high requirements from functionality, performance and security point of views, given the large amount of distributed connected elements and the real-time information transmission and system management. The paper describes the design and implementation of the data server, Web interface and the embedded networking capabilities of the smart circuit breakers, underlining the protocols and communication technologies used.

The role of smart home in smart real estate

NARCIS (Netherlands)

Allameh, E.; Heidari Jozam, M.; Vries, de B.; Timmermans, H.J.P.; Beetz, J.; Mozaffar, F.

2012-01-01

Purpose – The purpose of this paper is to review an emerging type of dwelling, indicated as Smart Home, with a focus on future user lifestyles and needs. Trends toward sustainability and technological changes dramatically alter the concepts of Smart Home. Consequently, real estate decisions are

An Analysis of Training Focused on Improving SMART Goal Setting for Specific Employee Groups

Science.gov (United States)

Worden, Jeannie M.

2014-01-01

This quantitative study examined the proficiency of employee SMART goal setting following the intervention of employee SMART goal setting training. Current challenges in higher education substantiate the need for employees to align their performance with the mission, vision, and strategic directions of the organization. A performance management…

Smart Home Test Bed: Examining How Smart Homes Interact with the Power Grid

Energy Technology Data Exchange (ETDEWEB)

2016-11-01

This fact sheet highlights the Smart Home Test Bed capability at the Energy Systems Integration Facility. The National Renewable Energy Laboratory (NREL) is working on one of the new frontiers of smart home research: finding ways for smart home technologies and systems to enhance grid operations in the presence of distributed, clean energy technologies such as photovoltaics (PV). To help advance this research, NREL has developed a controllable, flexible, and fully integrated Smart Home Test Bed.

Measuring level of friendliness of smart city: a perceptual study

Science.gov (United States)

Sani Roychansyah, Muhammad; Felasari, Sushardjanti

2018-03-01

Currently the concept of smart city comes not only at the level of discussion, but some cities have stepped in the stage of implementation. Many of promised benefits will be met for the needs of urban residents if the city applies this concept. Conversely, many professionals and scholars are still in doubt about readiness of a city in the application of this concept. Dimension of friendliness of the real city certainly will have some limitations in a smart city that relies more on interactions with information and communication technology (ICT). This new paradigm becomes background of this paper in viewing the friendliness dimension of a smart city based on city residents’ perceptions. This paper uses case of 2 cities that have different level of readiness in the application of smart city. They are Yogyakarta City and Magelang City, both are located in Central Java. The method applied in this paper is quantitative method based on perceptual answer of respondents structured in a Likert Scale. Importance Performance Analysis (IPA) is then used to look at the attributes of smart city’s dimension which will show the relationship of the level of city friendliness and the level of city readiness in an application of smart city. The result briefly shows that the level of city sensitivity in the application of smart city is very influential in viewing the friendliness of the city. The city that is better equipped to meet the needs of its population according to the dimensions of the smart city based on its existing characteristics has higher friendliness. Time period of applying a smart city concept as the City of Yogyakarta has done longer before Magelang City, is not a guarantee that the city then has a better level of friendliness. The urban citizens have appropriate affective aspect to articulate between what they need and what the city has provided.

Smart Money

DEFF Research Database (Denmark)

Avital, Michel; Hedman, Jonas; Albinsson, Lars

2017-01-01

transaction costs by providing seamless real-time payments. In addition, digital legal tender that is based on blockchain technology can provide a foundation for customizable “smart money” which can be used to manage the appropriation of money and its use. In essence, the smart money is a customizable value...

The Smart Energy System

DEFF Research Database (Denmark)

Jurowetzki, Roman; Dyrelund, Anders; Hummelmose, Lars

Copenhagen Cleantech Cluster has launched a new report, which provides an overview of Danish competencies relating to smart energy systems. The report, which is based on a questionnaire answered by almost 200 companies working with smart energy as well as a number of expert interviews, focuses on...... production, large scale solar heat, fuel cells, heat storage, waste incineration, among others, the report draws a picture of Denmark as a research and development hub for smart energy system solutions.......Copenhagen Cleantech Cluster has launched a new report, which provides an overview of Danish competencies relating to smart energy systems. The report, which is based on a questionnaire answered by almost 200 companies working with smart energy as well as a number of expert interviews, focuses...... on the synergies which are obtained through integration of the district heating and district cooling, gas, and electricity grid into a single smart energy system. Besides documenting the technology and innovation strengths that Danish companies possess particularly relating to wind, district heating, CHP...

Smart Nacre-inspired Nanocomposites.

Science.gov (United States)

Peng, Jingsong; Cheng, Qunfeng

2018-03-15

Nacre-inspired nanocomposites with excellent mechanical properties have achieved remarkable attention in the past decades. The high performance of nacre-inspired nanocomposites is a good basis for the further application of smart devices. Recently, some smart nanocomposites inspired by nacre have demonstrated good mechanical properties as well as effective and stable stimuli-responsive functions. In this Concept, we summarize the recent development of smart nacre-inspired nanocomposites, including 1D fibers, 2D films and 3D bulk nanocomposites, in response to temperature, moisture, light, strain, and so on. We show that diverse smart nanocomposites could be designed by combining various conventional fabrication methods of nacre-inspired nanocomposites with responsive building blocks and interface interactions. The nacre-inspired strategy is versatile for different kinds of smart nanocomposites in extensive applications, such as strain sensors, displays, artificial muscles, robotics, and so on, and may act as an effective roadmap for designing smart nanocomposites in the future. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Service-oriented advanced metering infrastructure for smart grids

NARCIS (Netherlands)

Chen, S.; Lukkien, J.J.; Zhang, L.

2011-01-01

Advanced Metering Infrastructure (AMI) enables smart grids to involve power consumers in the business process of power generation transmission, distribution and consumption. However, the participant of consumers challenges the current power systems with system integration and cooperation and

Service-oriented advanced metering infrastructure for smart grids

NARCIS (Netherlands)

Chen, S.; Lukkien, J.J.; Zhang, L.

2010-01-01

Advanced Metering Infrastructure (AMI) enables smart grids to involve power consumers in the business process of power generation, transmission, distribution and consumption. However, the participant of consumers challenges the current power systems with system integration and cooperation and

Feasibility Test with a STS304 tube of the Eddy Current Test using a Bobbin Probe for the SMART SG Tube Inspection

International Nuclear Information System (INIS)

Lee, Yoon Sang; Jung, Hyun Kyu; Choung, Yun Hang

2010-01-01

The SMART SG tubes will be made of Alloy 690. The outside diameter will be 17 mm and the thickness will be 2.5 mm. They will be assembled helically around, and their innermost diameter will be about 600 mm and the total length will be about 32 meters. For the sake of safety, SMART SG tubes are designed for use with thick tubes such as 2.5 mm thickness compared to about 1 mm thickness of normal Korean standard pressurized water reactor tubes. Due to using thick tubes such as the 2.5 mm varieties, it was doubted that the Eddy Current Testing Method (ECT) would be a feasible method. Therefore we are trying to check the feasibility of the ECT using the substitute material STS304 tube instead of Alloy 690 tubes with the bobbin type ECT probe. The previous paper reported the feasibility of the ECT using modeling, but this paper will report the preliminary experimental results and comparison with the previous results of the modeling for the STS304 tube

The Early Diffusion of Smart Meters in the US Electric Power Industry

Science.gov (United States)

Strong, Derek Ryan

The impact of new technologies within and across industries is only felt through their widespread diffusion, yet studies of technology diffusion are scarce compared to other aspects of the innovation process. The electric power industry is one industry that is currently undergoing substantial change as a result of both technological and institutional innovations. In this dissertation I examine the economic rationale for the adoption of smart meters by electric power utilities and the relationship between smart meters and the evolving electric power industry. I contribute to empirical research on technology diffusion by studying the early diffusion of smart meters in the US electric power industry. Using a panel dataset and econometric models, I analyze the determinants of both the interfirm and intrafirm diffusion of smart meters in the United States. The empirical findings suggest multiple drivers of smart meter diffusion. Policy and regulatory support have had a significant, positive impact on adoption but have not been the only relevant determinants. The findings also suggest that utility characteristics and some combination of learning, cost reductions, and technology standards have been important determinants affecting smart meter diffusion. I also explore the policy implications resulting from this analysis for enhancing the diffusion of smart meters. The costs and benefits of adopting smart meters have been more uncertain than initially thought, suggesting that some policy support for adoption was premature. The coordination of policies is also necessary to achieve the full benefits of using smart meters.

Atmospheric Signature of the Agulhas Current

Science.gov (United States)

Nkwinkwa Njouodo, Arielle Stela; Koseki, Shunya; Keenlyside, Noel; Rouault, Mathieu

2018-05-01

Western boundary currents play an important role in the climate system by transporting heat poleward and releasing it to the atmosphere. While their influence on extratropical storms and oceanic rainfall is becoming appreciated, their coastal influence is less known. Using satellite and climate reanalysis data sets and a regional atmospheric model, we show that the Agulhas Current is a driver of the observed band of rainfall along the southeastern African coast and above the Agulhas Current. The Agulhas current's warm core is associated with sharp gradients in sea surface temperature and sea level pressure, a convergence of low-level winds, and a co-located band of precipitation. Correlations among wind convergence, sea level pressure, and sea surface temperature indicate that these features show high degree of similarity to those in the Gulf Stream region. Model experiments further indicate that the Agulhas Current mostly impacts convective rainfall.

Smart space technology innovations

CERN Document Server

Chen, Mu-Yen

2013-01-01

Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

The People's Smart Sculpture

OpenAIRE

Koplin, Martin; Nedelkovski, Igor; Salo, Kari

2016-01-01

The People’s Smart Sculpture (PS2) panel discusses future oriented approaches in smart media-art, developed, designed and exploited for artistic and public participation in the change and re-design of our living environment. The actual debate about a smart future is not taking into account any idea of media art as an instrument for to realize the social sculpture, mentioned by Beuys [1] or as social sculpture itself. The People’s Smart Sculpture is the only large scale Creative Europe media-a...

Home, Smart Home

DEFF Research Database (Denmark)

Hansen, Ellen Kathrine; Olesen, Gitte Gylling Hammershøj; Mullins, Michael

2013-01-01

The article places focus on how smart technologies integrated in a one family- home and particular the window offer unique challenges and opportunities for designing buildings with the best possible environments for people and nature. Toward an interdisciplinary approach, we address the interaction...... between daylight defined in technical terms and daylight defined in aesthetic, architectural terms. Through field-tests of a Danish carbon-neutral home and an analysis of five key design parameters, we explore the contradictions and potentials in smart buildings, using the smart window as example of how...... to the energy design is central. The study illuminates an approach of the design of smart houses as living organisms by connecting technology with the needs of the occupants with the power and beauty of daylight....

Planning and designing smart grids: philosophical considerations

NARCIS (Netherlands)

Ribeiro, P.F.; Polinder, H.; Verkerk, M.J.

2012-01-01

The electric power grid is a crucial part of societal infrastructure and needs constant attention to maintain its performance and reliability. European grid project investments are currently valued at over 5 billion Euros and are estimated to reach 56 billion by 2020 [2]. Successful smart grid

Rethinking Participation in Smart Energy System Planning

NARCIS (Netherlands)

Lammers, Imke; Arentsen, Maarten J.

2017-01-01

While the technical layout of smart energy systems is well advanced, the implementation of these systems is slowed down by the current decision-making practice regarding such energy infrastructures. We call for a reorganisation of the decision-making process on local energy planning and address the

Analysis and improvement of security of energy smart grids

International Nuclear Information System (INIS)

Halimi, Halim

2014-01-01

protected using Paillier Homomorphic Cryptosystem. The second part uses known access structure with a control mechanism, which gives selective access to data stored in DC and used by different smart grid users. In this research, we describe the smart grid goals and tactics solution, and present a three-layer network communication architecture for smart grid. Next, we discus about security requirement in smart grid. We then introduce the current security solution, whose integration is essential for achieving protection against existing and future sophisticated attacks. We propose a new key distribution and management scheme for Home Area Network (HAN) and Neighborhood Area Network (NAN). We also propose the scheme for key update/freshness and key revocation. Finally, a group ID based mechanism is proposed to establish the keys for a large amount of users with small overload. (author)

SPIE Smart Structures Product Implementation Award: a review of the first ten years

Science.gov (United States)

Anderson, Eric H.; Sater, Janet M.

2007-04-01

The research field of smart materials and structures has been a distinct entity for two decades. Over the past ten years, the SPIE Industrial and Commercial Applications Conference has presented a Smart Structures Product Implementation Award at its annual symposium. This paper revisits the nine winning entries to date (1998-2007) and updates their status. The paper begins with a brief description of the original and current intent of the award and follows with a short overview of the evolution of smart structures, from research to products. The winning teams and their respective products are then described. The current status of the products is discussed based on publicly available information and input from the respective companies. Note however that it is not the purpose of the paper to rank the product winners in terms of success or sales. The paper concludes with an assessment of the larger trends in productization of smart structures technologies. The application "form" for the award as well as the evaluation criteria and suggestions for improving award application packages can be found in the appendix.

Novel Simulation Approaches for Smart Grids

Directory of Open Access Journals (Sweden)

Eleftherios Tsampasis

2016-06-01

Full Text Available The complexity of the power grid, in conjunction with the ever increasing demand for electricity, creates the need for efficient analysis and control of the power system. The evolution of the legacy system towards the new smart grid intensifies this need due to the large number of sensors and actuators that must be monitored and controlled, the new types of distributed energy sources that need to be integrated and the new types of loads that must be supported. At the same time, integration of human-activity awareness into the smart grid is emerging and this will allow the system to monitor, share and manage information and actions on the business, as well as the real world. In this context, modeling and simulation is an invaluable tool for system behavior analysis, energy consumption estimation and future state prediction. In this paper, we review current smart grid simulators and approaches for building and user behavior modeling, and present a federated smart grid simulation framework, in which building, control and user behavior modeling and simulation are decoupled from power or network simulators and implemented as discrete components. This framework enables evaluation of the interactions between the communication infrastructure and the power system taking into account the human activities, which are at the focus of emerging energy-related applications that aim to shape user behavior. Validation of the key functionality of the proposed framework is also presented.

Smart Tourism: a practice approach

DEFF Research Database (Denmark)

Ren, Carina Bregnholm; Petersen, Morten Krogh; Nielsen, Tanja Knoblauch

2018-01-01

by technology and data, but must be understood as a socio-technical and collaborative accomplishment. This entails seeing seemingly mundane issues as central to developing Smart Tourism and to link the development of Smart Tourism to transformations in the practices of everyday organizational life.......In this chapter, we explore how a Smart Destination is imagined and grappled with at an organizational level in its first and tentative stages of development. Drawing on practice theory and research in the North Denmark Region, we show how the idea of Smart Tourism is embraced by almost all...... of the stakeholders in the area, while the full potentials of this new phenomenon are experienced as difficult to realize. Abstaining from seeing Smart Tourism as a unilinear technological or digital evolution, we present four situated configurations of Smart Tourism. We argue that Smart Tourism is not made up solely...

Using Smart Meters Data for Energy Management Operations and Power Quality Monitoring in a Microgrid

DEFF Research Database (Denmark)

Palacios-Garcia, Emilio J.; Diaz, Enrique Rodriguez; Anvari-Moghaddam, Amjad

2017-01-01

Smart metering devices have become an essential part in the development of the current electrical network toward the paradigm of Smart Grid. These meters present in most of the cases, functionalities whose analysis capabilities go further beyond the basic automated meter readings for billing purp...

Values in the Smart Grid: The co-evolving political economy of smart distribution

International Nuclear Information System (INIS)

Hall, Stephen; Foxon, Timothy J.

2014-01-01

Investing in smart grid infrastructure is a key enabler for the transition to low carbon energy systems. Recent work has characterised the costs and benefits of individual “smart” investments. The political economy of the UK electricity system, however, has co-evolved such that there is a mismatch between where benefits accrue and where costs are incurred, leading to a problem of value capture and redeployment. Further, some benefits of smart grids are less easy to price directly and can be classified as public goods, such as energy security and decarbonisation. This paper builds on systemic treatments of energy system transitions to characterise the co-evolution of value capture and structural incentives in the electricity distribution system, drawing on semi-structured interviews and focus groups undertaken with smart grid stakeholders in the UK. This leads to an identification of municipal scale values that may be important for business models for the delivery of smart infrastructure. Municipalities may thus pursue specific economic opportunities through smart grid investment. This supports recent practical interest in an expanded role for municipalities as partners and investors in smart grid infrastructures. - Highlights: • Smart grid investments can benefit municipal economic development. • Drawing on urban political economy we describe these values. • New values alter the smart grid investment problem. • New integration of urban policy and DNOs are proposed by this research. • Socio-technical approaches are enhanced by urban political economy and vice versa

Development of auditing technology for accident analysis of SMART-P

Energy Technology Data Exchange (ETDEWEB)

Chung, B. D.; Lee, Y. J.; Jeong, J. J.; Kim, H. C.; Chung, Y. J.; Bae, K. H

2004-06-15

The objective of this project is to develop thermal hydraulic models of the regulatory auditing codes for the application of SMART-P integrated reactor. The current year fall under the 2nd step of the 3 year project, and the main researches were focused on developing thermal hydraulic models and improving the auditing code according to the PIRT ranking. The input model for SMART-P has been developed with consistent to the current design status documents. The calculation note has been developed with consistent to the current design status documents. The calculation note has been also prepared and checked by independent reviewer as Q/A procedure. The evaluation of experimental availabilities and code collapsible has been done by expert group and summarized as validation matrix forms. The matric would be utilized as the basis of code assessment in next year.

Smart phone usage and addiction among dental students in Saudi Arabia: a cross sectional study.

Science.gov (United States)

Venkatesh, Elluru; Jemal, Mohammad Yousef Al; Samani, Abdullah Saleh Al

2017-04-06

Purpose The main aim of this research is to explore measures of smart phone usage, smart phone addiction, and their associations with demographic and health behavior-related variables among dental students in Saudi Arabia. Methods A Cross sectional study involving sample of 205 dental students from Qaseem Private College were surveyed for smart phone use and addiction using the short version of the Smartphone Addiction Scale for Adolescents (SAS-SV). Results Smart phone addiction was seen in 136 (71.9%) of the 189 students. The findings from our study revealed that high stress levels, low physical activity, higher body mass index (BMI), longer duration of smart phone usage, higher frequency of usage, shorter time period until first smart phone use in the morning and social networking sites (SNS) were associated significantly with the smart phone addiction. Conclusion The current research gives the information about the extent of smart phone over usage and addiction among the dental students in Saudi Arabia with indication of the predictors of addiction and the need for further research in the area with comprehensible interpretation to spread the awareness of the smart phone addiction.

Deploying 5G-technologies in smart city and smart home wireless sensor networks with interferences

DEFF Research Database (Denmark)

Lynggaard, Per; Skouby, Knud Erik

2015-01-01

communication in an Internet of Things (5G) contexts. In this paper we discuss some of the key challenges that exist in the smart city and smart home networks in the light of possible 5G-solutions. Focus is on deploying cognitive radio technologies (5G) which enables the smart city networks to support......Deploying 5G technologies in a combination of smart homes and smart city opens for a new ecosystem with big potentials. The potentials lie in the creation of an advanced ICT infrastructure with support for connected and entangled services possibilities including technologies for efficient...... interconnected infrastructure elements, to handle big-data from the smart homes, and to be compatible with existing infrastructures. The considered cognitive radio technology is based on pre-coded OFDM which offers the needed flexibility to deal with the key challenges found in the smart home networks. Thus...

Hacking the Natural Habitat: An in-the-wild study of smart homes, their development, and the people who live in them

OpenAIRE

Mennicken, Sarah; Huang, Elaine May

2012-01-01

Commercial home automation systems are becoming increasingly common, affording the opportunity to study technology-augmented homes in real world contexts. In order to understand how these technologies are being integrated into homes and their effects on inhabitants, we conducted a qualitative study involving smart home professionals who provide such technology, people currently in the process of planning or building smart homes, and people currently living in smart homes. We identified motiva...

Smart network. The information nework in the smart grid; Smart Network. Das Informationsnetz im Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Horrmeyer, Bernd [Phoenix Contact GmbH und Co. KG, Blomberg (Germany). Industrielle Netzwerkverkabelung; Wissig, Claus [Phoenix Contact GmbH und Co. KG, Blomberg (Germany). Geraeteverbindungstechnik

2012-07-01

So far, the distribution of electricity was constructed unidirectional - from the generating power plant over the power distribution systems to the consumer. In the last decade, the utilization of renewable energies became popular. Thus the energy flows bi-directionally in the lines. Since the current has to be consumed at the moment of generation, the control becomes more difficult when bi-directional feeding. The techniques are demanding, and the number of devices for controlling and monitoring the of the distribution networks increases. The need for digital communication between the devices increases - the existing information networks in the energy sector are not dimensioned for this. With its bi-directional supply of energy, the smart grid requires a more frequent and faster communication between the devices. New cabling concepts according to IEC 61850 provide reliable and easy to maintain electrical and optical ethernet connections.

Sustainable smart cities creating spaces for technological, social and business development

CERN Document Server

Bennett, Dag; Yábar, Diana

2017-01-01

This volume provides the most current research on smart cities. Specifically, it focuses on the economic development and sustainability of smart cities and examines how to transform older industrial cities into sustainable smart cities. It aims to identify the role of the following elements in the creation and management of smart cities: • Citizen participation and empowerment • Value creation mechanisms • Public Administration • Quality of life and sustainability • Democracy • ICT • Private Initiatives and Entrepreneurship Regardless of their size, all cities are ultimately agglomerations of people and institutions. Agglomeration economies make it possible to attain minimum efficiencies of scale in the organization and delivery of services. However, the economic benefits do not constitute the main advantage of a city. A city’s status rest on three dimensions: (1) political impetus, which is the result of citizens’ participation and the public administration’s agenda; (2) applications deri...

Smart dental practice: capitalising on smart mobile technology.

Science.gov (United States)

Plangger, K; Bredican, J; Mills, A J; Armstrong, J

2015-08-14

To keep pace with consumer adoption of smart mobile devices, such as smartphones and tablets, and the applications ('apps') developed for these devices, dental professionals should consider how this technology could be used to simultaneously improve both patient service experiences and dental practice management. Using U-Commerce as a theoretical lens, this article discusses the potential value of smart mobile technology to the dental practice context, with a particular focus on the unique and customisable capabilities of apps. To take full advantage of this technology, a process is outlined for identifying and designing bespoke dental apps that takes into account the unique advantages of these devices. Dental practices, with increasing financial and competitive pressures, may improve the efficiency and profitability of operations and better manage patients, employees and stakeholders by integrating smart mobile technology.

Development of high-reliable real-time communication network protocol for SMART

Energy Technology Data Exchange (ETDEWEB)

Song, Ki Sang; Kim, Young Sik [Korea National University of Education, Chongwon (Korea); No, Hee Chon [Korea Advanced Institute of Science and Technology, Taejon (Korea)

1999-04-01

In this research, we first define protocol subsets for SMART(System-integrated Modular Advanced Reactor) communication network based on the requirement of SMART MMIS transmission delay and traffic requirements and OSI(Open System Interconnection) 7 layers' network protocol functions. Also, current industrial purpose LAN protocols are analyzed and the applicability of commercialized protocols are checked. For the suitability test, we have applied approximated SMART data traffic and maximum allowable transmission delay requirement. With the simulation results, we conclude that IEEE 802.5 and FDDI which is an ANSI standard, is the most suitable for SMART. We further analyzed the FDDI and token ring protocols for SMART and nuclear plant network environment including IEEE 802.4, IEEE 802.5, and ARCnet. The most suitable protocol for SMART is FDDI and FDDI MAC and RMT protocol specifications have been verified with LOTOS and the verification results show that FDDI MAC and RMT satisfy the reachability and liveness, but does not show deadlock and livelock. Therefore, we conclude that FDDI MAC and RMT is highly reliable protocol for SMART MMIS network. After that, we consider the stacking fault of IEEE 802.5 token ring protocol and propose a fault tolerant MAM(Modified Active Monitor) protocol. The simulation results show that the MAM protocol improves lower priority traffic service rate when stacking fault occurs. Therefore, proposed MAM protocol can be applied to SMART communication network for high reliability and hard real-time communication purpose in data acquisition and inter channel network. (author). 37 refs., 79 figs., 39 tabs.

Theoretical Characterizaiton of Visual Signatures (Muzzle Flash)

Science.gov (United States)

Kashinski, D. O.; Scales, A. N.; Vanderley, D. L.; Chase, G. M.; di Nallo, O. E.; Byrd, E. F. C.

2014-05-01

We are investigating the accuracy of theoretical models used to predict the visible, ultraviolet and infrared spectra of product materials ejected from the muzzle of currently fielded systems. Recent advances in solid propellants has made the management of muzzle signature (flash) a principle issue in weapons development across the calibers. A priori prediction of the electromagnetic spectra of formulations will allow researchers to tailor blends that yield desired signatures and determine spectrographic detection ranges. We are currently employing quantum chemistry methods at various levels of sophistication to optimize molecular geometries, compute vibrational frequencies, and determine the optical spectra of specific gas-phase molecules and radicals of interest. Electronic excitations are being computed using Time Dependent Density Functional Theory (TD-DFT). A comparison of computational results to experimental values found in the literature is used to assess the affect of basis set and functional choice on calculation accuracy. The current status of this work will be presented at the conference. Work supported by the ARL, and USMA.

Some Proxy Signature and Designated verifier Signature Schemes over Braid Groups

OpenAIRE

Lal, Sunder; Verma, Vandani

2009-01-01

Braids groups provide an alternative to number theoretic public cryptography and can be implemented quite efficiently. The paper proposes five signature schemes: Proxy Signature, Designated Verifier, Bi-Designated Verifier, Designated Verifier Proxy Signature And Bi-Designated Verifier Proxy Signature scheme based on braid groups. We also discuss the security aspects of each of the proposed schemes.

Corporate Smart Phones

DEFF Research Database (Denmark)

Cavazotte, Flávia; Heloisa Lemos, Ana; Villadsen, Kaspar

2014-01-01

This article explores how the adoption of company sponsored smart phones inflicts upon the lives of professionals. Drawing upon qualitative interviews at a law firm in Brazil, the experiences of new smart phone users are reported upon in detail. Increased accessibility, accuracy and speed...... that negatively affected their private spheres, yet many of them paradoxically requested more efficient smart phone connectivity. The article focuses on the justifications, the different narrative strategies, employed by professionals for their conscious engagement in escalating work connectivity. It is suggested...

Wireless Smart Systems Beyond RFID

OpenAIRE

Vermesan, Ovidiu

2008-01-01

It is expected that in the coming 20 years the IoT will be pervasive, and ubiquitous: smart devices, embedded in smart materials, will work in synergy to improve the quality of our lives. In this context wireless smart systems will play an essential role that is far beyond the ID information that is part of RFID devices today. Wireless Smart Systems Beyond RFID

Investigating the Role of Virtual Reality in Planning for Sustainable Smart Cities

Directory of Open Access Journals (Sweden)

Elmira Jamei

2017-11-01

Full Text Available With rapid population growth, urban designers face tremendous challenges to accommodate the increasing size of the population in urban areas while simultaneously considering future environmental, social, and economic impacts. A “smart city” is an urban development vision that integrates multiple information and communication technologies to manage the assets of a city, including its information systems, transportation systems, power plants, water supply networks, waste management systems, and other community services provided by a local department. The goal of creating a smart city is to improve the quality of life of citizens by using technology and by addressing the environmental, social, cultural, and physical needs of a society. Data modeling and data visualization are integral parts of planning a smart city, and planning professionals currently seek new methods for real-time simulations. The impact analysis of “what-if scenarios” frequently takes a significant amount of time and resources, and virtual reality (VR is a potential tool for addressing these challenges. VR is a computer technology that replicates an environment, whether real or imagined, and simulates the physical presence and environment of a user to allow for user interaction. This paper presents a review of the capacity of VR to address current challenges in creating, modeling, and visualizing smart cities through material modeling and light simulation in a VR environment. This study can assist urban planners, stakeholders, and communities to further understand the roles of planning policies in creating a smart city, particularly in the early design stages. The significant roles of technologies, such as VR, in targeting real-time simulations and visualization requirements for smart cities are emphasized.

Smart Sustainable Islands VS Smart Sustainable Cities

Science.gov (United States)

Pantazis, D. N.; Moussas, V. C.; Murgante, B.; Daverona, A. C.; Stratakis, P.; Vlissidis, N.; Kavadias, A.; Economou, D.; Santimpantakis, K.; Karathanasis, B.; Kyriakopoulou, V.; Gadolou, E.

2017-09-01

This paper has several aims: a) the presentation of a critical analysis of the terms "smart sustainable cities" and "smart sustainable islands" b) the presentation of a number of principles towards to the development methodological framework of concepts and actions, in a form of a manual and actions guide, for the smartification and sustainability of islands. This kind of master plan is divided in thematic sectors (key factors) which concern the insular municipalities c) the creation of an island's smartification and sustainability index d) the first steps towards the creation of a portal for the presentation of our smartification actions manual, together with relative resources, smart applications examples, and, in the near future the first results of our index application in a number of Greek islands and e) the presentation of some proposals of possible actions towards their sustainable development and smartification for the municipalities - islands of Paros and Antiparos in Greece, as case studies.

SMART SUSTAINABLE ISLANDS VS SMART SUSTAINABLE CITIES

Directory of Open Access Journals (Sweden)

D. N. Pantazis

2017-09-01

Full Text Available This paper has several aims: a the presentation of a critical analysis of the terms “smart sustainable cities” and “smart sustainable islands” b the presentation of a number of principles towards to the development methodological framework of concepts and actions, in a form of a manual and actions guide, for the smartification and sustainability of islands. This kind of master plan is divided in thematic sectors (key factors which concern the insular municipalities c the creation of an island’s smartification and sustainability index d the first steps towards the creation of a portal for the presentation of our smartification actions manual, together with relative resources, smart applications examples, and, in the near future the first results of our index application in a number of Greek islands and e the presentation of some proposals of possible actions towards their sustainable development and smartification for the municipalities - islands of Paros and Antiparos in Greece, as case studies.

Smart acquisition EELS

International Nuclear Information System (INIS)

Sader, Kasim; Schaffer, Bernhard; Vaughan, Gareth; Brydson, Rik; Brown, Andy; Bleloch, Andrew

2010-01-01

We have developed a novel acquisition methodology for the recording of electron energy loss spectra (EELS) using a scanning transmission electron microscope (STEM): 'Smart Acquisition'. Smart Acquisition allows the independent control of probe scanning procedures and the simultaneous acquisition of analytical signals such as EELS. The original motivation for this work arose from the need to control the electron dose experienced by beam-sensitive specimens whilst maintaining a sufficiently high signal-to-noise ratio in the EEL signal for the extraction of useful analytical information (such as energy loss near edge spectral features) from relatively undamaged areas. We have developed a flexible acquisition framework which separates beam position data input, beam positioning, and EELS acquisition. In this paper we demonstrate the effectiveness of this technique on beam-sensitive thin films of amorphous aluminium trifluoride. Smart Acquisition has been used to expose lines to the electron beam, followed by analysis of the structures created by line-integrating EELS acquisitions, and the results are compared to those derived from a standard EELS linescan. High angle annular dark-field images show clear reductions in damage for the Smart Acquisition areas compared to the conventional linescan, and the Smart Acquisition low loss EEL spectra are more representative of the undamaged material than those derived using a conventional linescan. Atomically resolved EELS of all four elements of CaNdTiO show the high resolution capabilities of Smart Acquisition.

Smart acquisition EELS

Energy Technology Data Exchange (ETDEWEB)

Sader, Kasim, E-mail: k.sader@leeds.ac.uk [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Schaffer, Bernhard [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Department of Physics and Astronomy, University of Glasgow (United Kingdom); Vaughan, Gareth [Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Brydson, Rik [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Brown, Andy [Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Bleloch, Andrew [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Department of Engineering, University of Liverpool, Liverpool (United Kingdom)

2010-07-15

We have developed a novel acquisition methodology for the recording of electron energy loss spectra (EELS) using a scanning transmission electron microscope (STEM): 'Smart Acquisition'. Smart Acquisition allows the independent control of probe scanning procedures and the simultaneous acquisition of analytical signals such as EELS. The original motivation for this work arose from the need to control the electron dose experienced by beam-sensitive specimens whilst maintaining a sufficiently high signal-to-noise ratio in the EEL signal for the extraction of useful analytical information (such as energy loss near edge spectral features) from relatively undamaged areas. We have developed a flexible acquisition framework which separates beam position data input, beam positioning, and EELS acquisition. In this paper we demonstrate the effectiveness of this technique on beam-sensitive thin films of amorphous aluminium trifluoride. Smart Acquisition has been used to expose lines to the electron beam, followed by analysis of the structures created by line-integrating EELS acquisitions, and the results are compared to those derived from a standard EELS linescan. High angle annular dark-field images show clear reductions in damage for the Smart Acquisition areas compared to the conventional linescan, and the Smart Acquisition low loss EEL spectra are more representative of the undamaged material than those derived using a conventional linescan. Atomically resolved EELS of all four elements of CaNdTiO show the high resolution capabilities of Smart Acquisition.

Energy efficient direct current distribution in commercially used buildings with smart power link to the AC distribution grid; Energieeffiziente Gleichstromverteilung in kommerziell genutzten Gebaeuden mit intelligenter Kopplung zum Niederspannungsnetz

Energy Technology Data Exchange (ETDEWEB)

Weiss, Roland [Siemens AG, Erlangen (Germany); Boeke, Ulrich [Philips Group Innovation-Research, Eindhoven (Netherlands); Maurer, Wilhelm [Infineon Technologies AG, Neubiberg (Germany); Zeltner, Stefan [Fraunhofer-Inst. fuer Integrierte Systeme und Bauelementetechnologie (IISB), Erlangen (Germany)

2012-07-01

The joint undertaking ''Direct Current Components and Grid'' (DCC+G) takes on the strategic challenge to reduce energy consumption and thus the reduction of CO{sub 2} emission caused by commercially used buildings through research in the fields of Direct Current distribution at a voltage level of {+-} 380 V. The major energy consumers in commercially used buildings, ready for the ''net-zero-energy'' goal of the European Union, are heat pumps for heating, ventilation systems, air conditioning units, cooling units (HVAC), lighting systems and information technology. All these components and subsystems have in common, that the most efficient versions would benefit from a direct current supply. Additionally the local producers of electric energy like photovoltaic systems usually generate DC-current. A Direct Current distribution grid within buildings would avoid the repeating conversion from DC and AC an vice versa and therefore reduce conversion losses. Important components of a direct current distribution grid are central, smart, high efficient, bidirectional rectifiers replacing the large number of small, less efficient rectifiers used today. Such large central rectifiers units could additionally be used to actively improve the power quality of the smart local AC distribution grid. One major part of the described activities is to show energy savings of about 5 % of electrical energy with a 2-phase direct current distribution grid using a voltage level of {+-} 380 V. (orig.)

Choosing front-of-package food labelling nutritional criteria: how smart were 'Smart Choices'?

Science.gov (United States)

Roberto, Christina A; Bragg, Marie A; Livingston, Kara A; Harris, Jennifer L; Thompson, Jackie M; Seamans, Marissa J; Brownell, Kelly D

2012-02-01

The 'Smart Choices' programme was an industry-driven, front-of-package (FOP) nutritional labelling system introduced in the USA in August 2009, ostensibly to help consumers select healthier options during food shopping. Its nutritional criteria were developed by members of the food industry in collaboration with nutrition and public health experts and government officials. The aim of the present study was to test the extent to which products labelled as 'Smart Choices' could be classified as healthy choices on the basis of the Nutrient Profile Model (NPM), a non-industry-developed, validated nutritional standard. A total of 100 packaged products that qualified for a 'Smart Choices' designation were sampled from eight food and beverage categories. All products were evaluated using the NPM method. In all, 64 % of the products deemed 'Smart Choices' did not meet the NPM standard for a healthy product. Within each 'Smart Choices' category, 0 % of condiments, 8·70 % of fats and oils, 15·63 % of cereals and 31·58 % of snacks and sweets met NPM thresholds. All sampled soups, beverages, desserts and grains deemed 'Smart Choices' were considered healthy according to the NPM standard. The 'Smart Choices' programme is an example of industries' attempts at self-regulation. More than 60 % of foods that received the 'Smart Choices' label did not meet standard nutritional criteria for a 'healthy' food choice, suggesting that industries' involvement in designing labelling systems should be scrutinized. The NPM system may be a good option as the basis for establishing FOP labelling criteria, although more comparisons with other systems are needed.

European and Italian experience of Smart Cities: A model for the smart planning of city built

Directory of Open Access Journals (Sweden)

Starlight Vattano

2013-05-01

Full Text Available The construction of the city through smart measures is now a frontier reached from many cities in the world. The built environment requires smart planning able to relate urban realities that are relegated to a marginal change. But how does the smart cities can create a relationship between sustainable cities of the future and their heritage? The article highlights the way of smart urban transformation of reality European and Italian proposing critical comparisons from which to infer smart parameters most used and easy to apply for the sustainable construction of these smart cities focusing on the urban sources of intelligent retrieval for quality their historical and cultural heritage.

On the evaluation of the efficacy of a smart damper: a new equivalent energy-based probabilistic approach

International Nuclear Information System (INIS)

Aly, A M; Christenson, R E

2008-01-01

Smart damping technology has been proposed to protect civil structures from dynamic loads. Each application of smart damping control provides varying levels of performance relative to active and passive control strategies. Currently, researchers compare the relative efficacy of smart damping control to active and passive strategies by running numerous simulations. These simulations can require significant computation time and resources. Because of this, it is desirable to develop an approach to assess the applicability of smart damping technology which requires less computation time. This paper discusses and verifies a probabilistic approach to determine the efficacy of smart damping technology based on clipped optimal state feedback control theory

Adding Concurrency to Smart Contracts

OpenAIRE

Dickerson, Thomas; Gazzillo, Paul; Herlihy, Maurice; Koskinen, Eric

2017-01-01

Modern cryptocurrency systems, such as Ethereum, permit complex financial transactions through scripts called smart contracts. These smart contracts are executed many, many times, always without real concurrency. First, all smart contracts are serially executed by miners before appending them to the blockchain. Later, those contracts are serially re-executed by validators to verify that the smart contracts were executed correctly by miners. Serial execution limits system throughput and fails ...

Revealing household characteristics from smart meter data

International Nuclear Information System (INIS)

Beckel, Christian; Sadamori, Leyna; Staake, Thorsten; Santini, Silvia

2014-01-01

Utilities are currently deploying smart electricity meters in millions of households worldwide to collect fine-grained electricity consumption data. We present an approach to automatically analyzing this data to enable personalized and scalable energy efficiency programs for private households. In particular, we develop and evaluate a system that uses supervised machine learning techniques to automatically estimate specific “characteristics” of a household from its electricity consumption. The characteristics are related to a household's socio-economic status, its dwelling, or its appliance stock. We evaluate our approach by analyzing smart meter data collected from 4232 households in Ireland at a 30-min granularity over a period of 1.5 years. Our analysis shows that revealing characteristics from smart meter data is feasible, as our method achieves an accuracy of more than 70% over all households for many of the characteristics and even exceeds 80% for some of the characteristics. The findings are applicable to all smart metering systems without making changes to the measurement infrastructure. The inferred knowledge paves the way for targeted energy efficiency programs and other services that benefit from improved customer insights. On the basis of these promising results, the paper discusses the potential for utilities as well as policy and privacy implications. - Highlights: • Many household characteristics can be automatically inferred from smart meter data. • We develop a system to infer employment status and number of occupants, for instance. • We evaluate our system analyzing data collected from 4232 households in Ireland. • The insights enable personalized and scalable efficiency campaigns for utilities. • Energy efficiency measures must be complemented by privacy protection

Characterization of radiofrequency field emissions from smart meters.

Science.gov (United States)

Tell, Richard A; Kavet, Robert; Mezei, Gabor

2013-01-01

This study presents measurement data that describe radiofrequency emission levels and patterns from smart meters (rated nominally at 1 W) currently deployed in Pacific Gas and Electric Company's service territory in northern California. The smart meters in our investigation could not be set to operate continuously and required a Field Service Unit to induce short periods of emitted fields. To obtain peak field data under both laboratory and ambient conditions, a spectrum analyzer scanned across the 83 transmitting channels between 902 and 928 MHz used by the smart meter on a random frequency-hopping basis. To obtain data describing temporal emission patterns, the analyzer operated in scope mode. Duty cycle was estimated using transmit data acquired by the system operator from over 88,000 m. Instantaneous peak fields at 0.3 m in front of the meters were no more than 15% of the US Federal Communications Commission (FCC) exposure limit for the general public, and 99.9% of the meters operated with a duty cycle of 1.12% or less during the sampling period. In a sample of measurements in six single-detached residences equipped with individual smart meters, no interior measurement of peak field exceeded 1% of the FCC's general public exposure limit.

State of the Art Authentication, Access Control, and Secure Integration in Smart Grid

Directory of Open Access Journals (Sweden)

Neetesh Saxena

2015-10-01

Full Text Available The smart grid (SG is a promising platform for providing more reliable, efficient, and cost effective electricity to the consumers in a secure manner. Numerous initiatives across the globe are taken by both industry and academia in order to compile various security issues in the smart grid network. Unfortunately, there is no impactful survey paper available in the literature on authentications in the smart grid network. Therefore, this paper addresses the required objectives of an authentication protocol in the smart grid network along with the focus on mutual authentication, access control, and secure integration among different SG components. We review the existing authentication protocols, and analyze mutual authentication, privacy, trust, integrity, and confidentiality of communicating information in the smart grid network. We review authentications between the communicated entities in the smart grid, such as smart appliance, smart meter, energy provider, control center (CC, and home/building/neighborhood area network gateways (GW. We also review the existing authentication schemes for the vehicle-to-grid (V2G communication network along with various available secure integration and access control schemes. We also discuss the importance of the mutual authentication among SG entities while providing confidentiality and privacy preservation, seamless integration, and required access control with lower overhead, cost, and delay. This paper will help to provide a better understanding of current authentication, authorization, and secure integration issues in the smart grid network and directions to create interest among researchers to further explore these promising areas.

Smart Floor with Integrated Triboelectric Nanogenerator As Energy Harvester and Motion Sensor.

Science.gov (United States)

He, Chuan; Zhu, Weijun; Chen, Baodong; Xu, Liang; Jiang, Tao; Han, Chang Bao; Gu, Guang Qin; Li, Dichen; Wang, Zhong Lin

2017-08-09

A smart floor is demonstrated by integrating a square-frame triboelectric nanogenerator (SF-TENG) into a standard wood floor. The smart floor has two working modes based on two pairs of triboelectric materials: one is purposely chosen polytetrafluoroethylene films and aluminum (Al) balls, and the other is the floor itself and the objects that can be triboelectrically charged, such as basketball, shoe soles, and Scotch tape, etc. Utilizing the Al balls enclosed inside shallow boxes, the smart floor is capable of harvesting vibrational energy and, hence, provides a nonintrusive way to detect sudden falls in elderly people. In addition, when the basketball is bounced repeatedly on the floor, the average output voltage and current are 364 ± 43 V and 9 ± 1 μA, respectively, and 87 serially connected light-emitting diodes can be lit up simultaneously. Furthermore, the friction between the triboelectrically chargeable objects and the floor can also induce an alternating current output in the external circuit without the vibration of the Al balls. Normal human footsteps on the floor produce a voltage of 238 ± 17 V and a current of 2.4 ± 0.3 μA. Therefore, this work presents a smart floor with built-in SF-TENG without compromising the flexibility and stability of the standard wood floor and also demonstrates a way to harvest ambient energy solely by using conventional triboelectric materials in our daily life.

Signature detection and matching for document image retrieval.

Science.gov (United States)

Zhu, Guangyu; Zheng, Yefeng; Doermann, David; Jaeger, Stefan

2009-11-01

As one of the most pervasive methods of individual identification and document authentication, signatures present convincing evidence and provide an important form of indexing for effective document image processing and retrieval in a broad range of applications. However, detection and segmentation of free-form objects such as signatures from clustered background is currently an open document analysis problem. In this paper, we focus on two fundamental problems in signature-based document image retrieval. First, we propose a novel multiscale approach to jointly detecting and segmenting signatures from document images. Rather than focusing on local features that typically have large variations, our approach captures the structural saliency using a signature production model and computes the dynamic curvature of 2D contour fragments over multiple scales. This detection framework is general and computationally tractable. Second, we treat the problem of signature retrieval in the unconstrained setting of translation, scale, and rotation invariant nonrigid shape matching. We propose two novel measures of shape dissimilarity based on anisotropic scaling and registration residual error and present a supervised learning framework for combining complementary shape information from different dissimilarity metrics using LDA. We quantitatively study state-of-the-art shape representations, shape matching algorithms, measures of dissimilarity, and the use of multiple instances as query in document image retrieval. We further demonstrate our matching techniques in offline signature verification. Extensive experiments using large real-world collections of English and Arabic machine-printed and handwritten documents demonstrate the excellent performance of our approaches.

Smart Cards and remote entrusting

Science.gov (United States)

Aussel, Jean-Daniel; D'Annoville, Jerome; Castillo, Laurent; Durand, Stephane; Fabre, Thierry; Lu, Karen; Ali, Asad

Smart cards are widely used to provide security in end-to-end communication involving servers and a variety of terminals, including mobile handsets or payment terminals. Sometime, end-to-end server to smart card security is not applicable, and smart cards must communicate directly with an application executing on a terminal, like a personal computer, without communicating with a server. In this case, the smart card must somehow trust the terminal application before performing some secure operation it was designed for. This paper presents a novel method to remotely trust a terminal application from the smart card. For terminals such as personal computers, this method is based on an advanced secure device connected through the USB and consisting of a smart card bundled with flash memory. This device, or USB dongle, can be used in the context of remote untrusting to secure portable applications conveyed in the dongle flash memory. White-box cryptography is used to set the secure channel and a mechanism based on thumbprint is described to provide external authentication when session keys need to be renewed. Although not as secure as end-to-end server to smart card security, remote entrusting with smart cards is easy to deploy for mass-market applications and can provide a reasonable level of security.

DrugSig: A resource for computational drug repositioning utilizing gene expression signatures.

Directory of Open Access Journals (Sweden)

Hongyu Wu

Full Text Available Computational drug repositioning has been proved as an effective approach to develop new drug uses. However, currently existing strategies strongly rely on drug response gene signatures which scattered in separated or individual experimental data, and resulted in low efficient outputs. So, a fully drug response gene signatures database will be very helpful to these methods. We collected drug response microarray data and annotated related drug and targets information from public databases and scientific literature. By selecting top 500 up-regulated and down-regulated genes as drug signatures, we manually established the DrugSig database. Currently DrugSig contains more than 1300 drugs, 7000 microarray and 800 targets. Moreover, we developed the signature based and target based functions to aid drug repositioning. The constructed database can serve as a resource to quicken computational drug repositioning. Database URL: http://biotechlab.fudan.edu.cn/database/drugsig/.

Information ethics in the context of smart devices

NARCIS (Netherlands)

Roux, Brian; Falgoust, Michael

2013-01-01

In this paper, we employ Extended Cognition as a background for a series of thought experiments about privacy and common used information technology devices. Laptops and smart phones are now widely used devices, but current privacy standards do not adequately address the relationship between the

Lightweight UDP Pervasive Protocol in Smart Home Environment Based on Labview

Science.gov (United States)

Kurniawan, Wijaya; Hannats Hanafi Ichsan, Mochammad; Rizqika Akbar, Sabriansyah; Arwani, Issa

2017-04-01

TCP (Transmission Control Protocol) technology in a reliable environment was not a problem, but not in an environment where the entire Smart Home network connected locally. Currently employing pervasive protocols using TCP technology, when data transmission is sent, it would be slower because they have to perform handshaking process in advance and could not broadcast the data. On smart home environment, it does not need large size and complex data transmission between monitoring site and monitoring center required in Smart home strain monitoring system. UDP (User Datagram Protocol) technology is quick and simple on data transmission process. UDP can broadcast messages because the UDP did not require handshaking and with more efficient memory usage. LabVIEW is a programming language software for processing and visualization of data in the field of data acquisition. This paper proposes to examine Pervasive UDP protocol implementations in smart home environment based on LabVIEW. UDP coded in LabVIEW and experiments were performed on a PC and can work properly.

Development of a smart city planning support tool using the cooperative method

Directory of Open Access Journals (Sweden)

Takeshi Kobayashi

2015-12-01

Full Text Available A reduction of environmental burdens is currently required. In particular, proposing a new approach for the construction of a smart city using renewable energy is important. The technological development of a smart city is founded building equipment and infrastructure. However, planning methods and their techniques using the collaboration approach with residents are only just developing. This study aimed to develop a support tool for the construction of a smart city using renewable energy while facilitating consensus-building efforts among residents using the method for a cooperative housing development. We organized the supporting methods for the construction of residential area using the cooperative method. Then, we developed supporting tools that interface the computer with these methods. We examined the support techniques for the construction of a residential area using renewable energy technology by analyzing Japanese cases of a smart city. Moreover, we developed a support tool for the construction of a smart city on a trial basis. We integrated the smart city construction tools and the cooperative housing construction support tool. This tool has a 3D modeling system that helps residents to easily understand the space image as a result of the examination. We also developed a professional supporting tool that residents can consider for cost-effectiveness in renewable energy and its environmental load reduction rate for the planning of a smart city.

SMART, Radiation Dose Rates on Cask Surface

International Nuclear Information System (INIS)

Yamakoshi, Hisao

1989-01-01

1 - Description of program or function: SMART calculates radiation dose rate at the center of each cask surface by using characteristic functions for radiation shielding ability and for radiation current back-scattered from cask wall and cask cavity of each cask, once cask-type is specified. 2 - Method of solution: Matrix Calculation

SIGNATURE: A workbench for gene expression signature analysis

Directory of Open Access Journals (Sweden)

Chang Jeffrey T

2011-11-01

Full Text Available Abstract Background The biological phenotype of a cell, such as a characteristic visual image or behavior, reflects activities derived from the expression of collections of genes. As such, an ability to measure the expression of these genes provides an opportunity to develop more precise and varied sets of phenotypes. However, to use this approach requires computational methods that are difficult to implement and apply, and thus there is a critical need for intelligent software tools that can reduce the technical burden of the analysis. Tools for gene expression analyses are unusually difficult to implement in a user-friendly way because their application requires a combination of biological data curation, statistical computational methods, and database expertise. Results We have developed SIGNATURE, a web-based resource that simplifies gene expression signature analysis by providing software, data, and protocols to perform the analysis successfully. This resource uses Bayesian methods for processing gene expression data coupled with a curated database of gene expression signatures, all carried out within a GenePattern web interface for easy use and access. Conclusions SIGNATURE is available for public use at http://genepattern.genome.duke.edu/signature/.

Complex IoT Systems as Enablers for Smart Homes in a Smart City Vision

OpenAIRE

Lynggaard, Per; Skouby, Knud Erik

2016-01-01

The world is entering a new era, where Internet-of-Things (IoT), smart homes, and smart cities will play an important role in meeting the so-called big challenges. In the near future, it is foreseen that the majority of the world’s population will live their lives in smart homes and in smart cities. To deal with these challenges, to support a sustainable urban development, and to improve the quality of life for citizens, a multi-disciplinary approach is needed. It seems evident, however, that...

Smart Metering. Synergies within medium voltage automation; Synergien durch Smart Metering. Automatisierung auf Mittelspannungsebene

Energy Technology Data Exchange (ETDEWEB)

Maas, Peter [IDS GmbH, Ettlingen (Germany)

2010-11-15

Transparent interdivisional system solutions are an indispensable and decisive precondition for the optimization of business processes. The implementation of a Smart Metering solution does not only provide data for billing purposes, but also renders important data for network operation. Synergies can be achieved through the use of a common infrastructure which covers both the needs of Smart Metering and network operation. An open architecture of the solution allows for the future integration of further services of the domains Smart Grid and Smart Home. (orig.)

Smart meter data: Balancing consumer privacy concerns with legitimate applications

International Nuclear Information System (INIS)

McKenna, Eoghan; Richardson, Ian; Thomson, Murray

2012-01-01

Smart meters are being rolled out in large numbers throughout the world, with proponents claiming they are a critical step in the transition to a low-carbon economy. Yet there are significant unresolved negative reactions to smart meters, principally based on the concern that smart meters might be used to infer the private activities that occur within a dwelling. Though smart meter data is classified as personal data, and as such protected under existing data protection frameworks in the EU, there are relevant exceptions, notably where the data is required for legitimate applications associated with the performance of 'regulated duties'. This paper contributes to this debate by examining the data requirements for some of the proposed applications of smart meter data within the electricity supply industry, and investigates whether the use of personal data can be minimized or even avoided. The discussion includes system balancing, demand reduction, demand response and distribution network operation and planning, and indicates that, for most of these applications, the requirements for personal data can indeed be minimized. 'Privacy friendly' alternatives are discussed. - Highlights: ▶ Current smart meter systems provide a strong indication of occupancy. ▶ This will have important implications for external and internal home privacy. ▶ Personal data requirements within legitimate applications are discussed. ▶ 'Privacy friendly' techniques are suggested that minimize the use of personal data. ▶ Distribution network operator has strongest claim for data from each household.

Long Island Smart Energy Corridor

Energy Technology Data Exchange (ETDEWEB)

Mui, Ming [Long Island Power Authority, Uniondale, NY (United States)

2015-02-04

The Long Island Power Authority (LIPA) has teamed with Stony Brook University (Stony Brook or SBU) and Farmingdale State College (Farmingdale or FSC), two branches of the State University of New York (SUNY), to create a “Smart Energy Corridor.” The project, located along the Route 110 business corridor on Long Island, New York, demonstrated the integration of a suite of Smart Grid technologies from substations to end-use loads. The Smart Energy Corridor Project included the following key features: -TECHNOLOGY: Demonstrated a full range of smart energy technologies, including substations and distribution feeder automation, fiber and radio communications backbone, advanced metering infrastructure (AM”), meter data management (MDM) system (which LIPA implemented outside of this project), field tools automation, customer-level energy management including automated energy management systems, and integration with distributed generation and plug-in hybrid electric vehicles. -MARKETING: A rigorous market test that identified customer response to an alternative time-of-use pricing plan and varying levels of information and analytical support. -CYBER SECURITY: Tested cyber security vulnerabilities in Smart Grid hardware, network, and application layers. Developed recommendations for policies, procedures, and technical controls to prevent or foil cyber-attacks and to harden the Smart Grid infrastructure. -RELIABILITY: Leveraged new Smart Grid-enabled data to increase system efficiency and reliability. Developed enhanced load forecasting, phase balancing, and voltage control techniques designed to work hand-in-hand with the Smart Grid technologies. -OUTREACH: Implemented public outreach and educational initiatives that were linked directly to the demonstration of Smart Grid technologies, tools, techniques, and system configurations. This included creation of full-scale operating models demonstrating application of Smart Grid technologies in business and residential

A universal data access and protocol integration mechanism for smart home

Science.gov (United States)

Shao, Pengfei; Yang, Qi; Zhang, Xuan

2013-03-01

With the lack of standardized or completely missing communication interfaces in home electronics, there is no perfect solution to address every aspect in smart homes based on existing protocols and technologies. In addition, the central control unit (CCU) of smart home system working point-to-point between the multiple application interfaces and the underlying hardware interfaces leads to its complicated architecture and unpleasant performance. A flexible data access and protocol integration mechanism is required. The current paper offers a universal, comprehensive data access and protocol integration mechanism for a smart home. The universal mechanism works as a middleware adapter with unified agreements of the communication interfaces and protocols, offers an abstraction of the application level from the hardware specific and decoupling the hardware interface modules from the application level. Further abstraction for the application interfaces and the underlying hardware interfaces are executed based on adaption layer to provide unified interfaces for more flexible user applications and hardware protocol integration. This new universal mechanism fundamentally changes the architecture of the smart home and in some way meets the practical requirement of smart homes more flexible and desirable.

Exploring private consumers’ willingness to adopt Smart Grid technology

DEFF Research Database (Denmark)

Toft, Madeleine Broman; Thøgersen, John

2015-01-01

it involves behavioural changes. There is a need to get more insight into who are willing to adopt SGT and why. This study draws on innovation adoption theory as a framework for understanding consumer adoption of this new technology. We explore whether consumers who have already adopted other types of new......The goal of radically increasing the proportion of electricity generated from renewable sources puts the current electrical grid under pressure and one of the solutions is to turn the grid into a ‘Smart Grid’. One of the key elements of the Smart Grid is that electricity consumers make some...... of their consumption available as flexible capacity to balance the grid. Consumers’ flexible capacity is only available to the grid if the consumers adopt Smart Grid technology (SGT) that establishes the link between the electric system and the consumer. This technology is new to private consumers and using...

The Smart Factory

DEFF Research Database (Denmark)

Radziwon, Agnieszka; Bilberg, Arne; Bogers, Marcel

2014-01-01

Nowadays we live in a world, which a decade ago would only be described in the science fiction literature. More and more things become smart and both scientists and engineers strive for developing not only new and innovative devices, but also homes, factories, or even cities. Despite of continuous...... development, many of those concepts are still being just a vision of the future, which still needs a lot of effort to become true. This paper reviews the usage of adjective smart in respect to technology and with a special emphasis on the smart factory concept placement among contemporary studies. Due...... to a lack of a consensus of common understanding of this term, a unified definition is proposed. The conceptualization will not only refer to various smart factory visions reported in the literature, but also link the crucial characteristics of this emerging manufacturing concept to usual manufacturing...

Hazards in smart grids. Smart meters can open the door to hackers; Gefahren im intelligenten Stromnetz. Smart Meter als Einfallstor fuer Hacker-Angriffe

Energy Technology Data Exchange (ETDEWEB)

Gerretz, Dirk [Covisint Emea Compuware GmbH, Neu-Isenburg (Germany)

2011-10-31

Smart grid, smart meter, smart home: Increasingly, intelligent technologies are introduced in the energy sector. The merging of power grids and data grids is costly and requires high investments in areas that are far from the key business and key competence of public utilities. Reliable protection of smart meters is a particular challenge as unauthorized access or manipulation may result in great financial and reputational damage. Prior to introducting smart meters, utilities should decide if they want to introduce the necessary safety technologies themselves, including hardware, software, and know-how, or if they want to rely on solutions provided by experienced market partners. They offer open, expandable and scalable platforms for comprehensive identity management and safe data exchange that have been tested in practice in several branches of industry.

Combining smart metering with successful marketing; Smart Metering mit erfolgreichem Marketing verbinden

Energy Technology Data Exchange (ETDEWEB)

Luckhardt, Sina [EVB Energie AG, Velbert (Germany)

2009-07-15

Smart metering can be implemented in various ways. Apart from data transmission via powerline cables, also teletransmission via GPRS may be advantageous. A current project investigates both communication strategies which can also be used in parallel, especially by major utilities with the appropriate infrastructure. In the case of concrete implementation, it has been found that the communication with users must be clear in order to give them an idea of the advantages of the new technologies, and that an appropriate marketing strategy must be developed for successful rollout. (orig.)

Smart Growth and Transportation

Science.gov (United States)

Describes the relationship between smart growth and transportation, focusing smart and sustainable street design, transit-oriented development, parking management, sustainable transportation planning, and related resources.

WSN- and IOT-Based Smart Homes and Their Extension to Smart Buildings

Science.gov (United States)

Ghayvat, Hemant; Mukhopadhyay, Subhas; Gui, Xiang; Suryadevara, Nagender

2015-01-01

Our research approach is to design and develop reliable, efficient, flexible, economical, real-time and realistic wellness sensor networks for smart home systems. The heterogeneous sensor and actuator nodes based on wireless networking technologies are deployed into the home environment. These nodes generate real-time data related to the object usage and movement inside the home, to forecast the wellness of an individual. Here, wellness stands for how efficiently someone stays fit in the home environment and performs his or her daily routine in order to live a long and healthy life. We initiate the research with the development of the smart home approach and implement it in different home conditions (different houses) to monitor the activity of an inhabitant for wellness detection. Additionally, our research extends the smart home system to smart buildings and models the design issues related to the smart building environment; these design issues are linked with system performance and reliability. This research paper also discusses and illustrates the possible mitigation to handle the ISM band interference and attenuation losses without compromising optimum system performance. PMID:25946630

WSN- and IOT-Based Smart Homes and Their Extension to Smart Buildings

Directory of Open Access Journals (Sweden)

Hemant Ghayvat

2015-05-01

Full Text Available Our research approach is to design and develop reliable, efficient, flexible, economical, real-time and realistic wellness sensor networks for smart home systems. The heterogeneous sensor and actuator nodes based on wireless networking technologies are deployed into the home environment. These nodes generate real-time data related to the object usage and movement inside the home, to forecast the wellness of an individual. Here, wellness stands for how efficiently someone stays fit in the home environment and performs his or her daily routine in order to live a long and healthy life. We initiate the research with the development of the smart home approach and implement it in different home conditions (different houses to monitor the activity of an inhabitant for wellness detection. Additionally, our research extends the smart home system to smart buildings and models the design issues related to the smart building environment; these design issues are linked with system performance and reliability. This research paper also discusses and illustrates the possible mitigation to handle the ISM band interference and attenuation losses without compromising optimum system performance.

WSN- and IOT-Based Smart Homes and Their Extension to Smart Buildings.

Science.gov (United States)

Ghayvat, Hemant; Mukhopadhyay, Subhas; Gui, Xiang; Suryadevara, Nagender

2015-05-04

Our research approach is to design and develop reliable, efficient, flexible, economical, real-time and realistic wellness sensor networks for smart home systems. The heterogeneous sensor and actuator nodes based on wireless networking technologies are deployed into the home environment. These nodes generate real-time data related to the object usage and movement inside the home, to forecast the wellness of an individual. Here, wellness stands for how efficiently someone stays fit in the home environment and performs his or her daily routine in order to live a long and healthy life. We initiate the research with the development of the smart home approach and implement it in different home conditions (different houses) to monitor the activity of an inhabitant for wellness detection. Additionally, our research extends the smart home system to smart buildings and models the design issues related to the smart building environment; these design issues are linked with system performance and reliability. This research paper also discusses and illustrates the possible mitigation to handle the ISM band interference and attenuation losses without compromising optimum system performance.

Smart Home and Smart City Solutions enabled by 5G, IoT, AAI and CoT Services

DEFF Research Database (Denmark)

Skouby, Knud Erik; Lynggaard, Per

2014-01-01

Future 5G technologies are expected to connect the world from the largest megacities to the smallest internet of things in an always online fashion. Such a connected hierarchy must combine the smart cities, the smart homes, and the internet of things into one large coherent infrastructure...... such as interconnected internet of things, smart homes with artificial intelligence, and a platform for new combined smart home and smart city services based on big-data....

Smart Distribution Systems

Directory of Open Access Journals (Sweden)

Yazhou Jiang

2016-04-01

Full Text Available The increasing importance of system reliability and resilience is changing the way distribution systems are planned and operated. To achieve a distribution system self-healing against power outages, emerging technologies and devices, such as remote-controlled switches (RCSs and smart meters, are being deployed. The higher level of automation is transforming traditional distribution systems into the smart distribution systems (SDSs of the future. The availability of data and remote control capability in SDSs provides distribution operators with an opportunity to optimize system operation and control. In this paper, the development of SDSs and resulting benefits of enhanced system capabilities are discussed. A comprehensive survey is conducted on the state-of-the-art applications of RCSs and smart meters in SDSs. Specifically, a new method, called Temporal Causal Diagram (TCD, is used to incorporate outage notifications from smart meters for enhanced outage management. To fully utilize the fast operation of RCSs, the spanning tree search algorithm is used to develop service restoration strategies. Optimal placement of RCSs and the resulting enhancement of system reliability are discussed. Distribution system resilience with respect to extreme events is presented. Test cases are used to demonstrate the benefit of SDSs. Active management of distributed generators (DGs is introduced. Future research in a smart distribution environment is proposed.

Smart-grid investments, regulation and organization

International Nuclear Information System (INIS)

Agrell, Per J.; Bogetoft, Peter; Mikkers, Misja

2013-01-01

Grid infrastructure managers worldwide are facing demands for reinvestments in new assets with higher on-grid and off-grid functionality in order to meet new environmental targets. The roles of the current actors will change as the vertical interfaces between regulated and unregulated tasks become blurred. In this paper, we characterize some of the effects of new asset investments policy on the network tasks, assets and costs and contrast this with the assumptions of the current economic network regulation. To provide structure, we present a model of investment provision under regulation between a distribution system operator and a potential investor–generator. The results from the model confirm the hypothesis that network regulation should find a focal point, should integrate externalities in the performance assessment and should avoid wide delegation of contracting-billing for smart-grid investments. - Highlights: ► We review regulatory solutions for smart-grid and DER investments. ► What matters more than upfront incentives is organization and delegation. ► We model regulated investment under private information by a generator or a DSO. ► Highest welfare for high-powered incentives and centralized information. ► Market approaches likely to give poor outcomes for this case.

Workshop report: US-China workshop on smart structures and smart systems

Science.gov (United States)

Tomizuka, Masayoshi

2006-03-01

A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.

Mass Spectrometric Methodologies for Investigating the Metabolic Signatures of Parkinson's Disease: Current Progress and Future Perspectives.

Science.gov (United States)

Gill, Emily L; Koelmel, Jeremy P; Yost, Richard A; Okun, Michael S; Vedam-Mai, Vinata; Garrett, Timothy J

2018-03-06

Parkinson's disease (PD) is a neurodegenerative disorder resulting from the loss of dopaminergic neurons of the substantia nigra as well as degeneration of motor and nonmotor basal ganglia circuitries. Typically known for classical motor deficits (tremor, rigidity, bradykinesia), early stages of the disease are associated with a large nonmotor component (depression, anxiety, apathy, etc.). Currently, there are no definitive biomarkers of PD, and the measurement of dopamine metabolites does not allow for detection of prodromal PD nor does it aid in long-term monitoring of disease progression. Given that PD is increasingly recognized as complex and heterogeneous, involving several neurotransmitters and proteins, it is of importance that we advance interdisciplinary studies to further our knowledge of the molecular and cellular pathways that are affected in PD. This approach will possibly yield useful biomarkers for early diagnosis and may assist in the development of disease-modifying therapies. Here, we discuss preanalytical factors associated with metabolomics studies, summarize current mass spectrometric methodologies used to evaluate the metabolic signature of PD, and provide future perspectives of the rapidly developing field of MS in the context of PD.

Technology Roadmaps: Smart Grids

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

The development of Technology Roadmaps: Smart Grids -- which the IEA defines as an electricity network that uses digital and other advanced technologies to monitor and manage the transport of electricity from all generation sources to meet the varying electricity demands of end users -- is essential if the global community is to achieve shared goals for energy security, economic development and climate change mitigation. Unfortunately, existing misunderstandings of exactly what smart grids are and the physical and institutional complexity of electricity systems make it difficult to implement smart grids on the scale that is needed. This roadmap sets out specific steps needed over the coming years to achieve milestones that will allow smart grids to deliver a clean energy future.

L1000CDS2: LINCS L1000 characteristic direction signatures search engine.

Science.gov (United States)

Duan, Qiaonan; Reid, St Patrick; Clark, Neil R; Wang, Zichen; Fernandez, Nicolas F; Rouillard, Andrew D; Readhead, Ben; Tritsch, Sarah R; Hodos, Rachel; Hafner, Marc; Niepel, Mario; Sorger, Peter K; Dudley, Joel T; Bavari, Sina; Panchal, Rekha G; Ma'ayan, Avi

2016-01-01

The library of integrated network-based cellular signatures (LINCS) L1000 data set currently comprises of over a million gene expression profiles of chemically perturbed human cell lines. Through unique several intrinsic and extrinsic benchmarking schemes, we demonstrate that processing the L1000 data with the characteristic direction (CD) method significantly improves signal to noise compared with the MODZ method currently used to compute L1000 signatures. The CD processed L1000 signatures are served through a state-of-the-art web-based search engine application called L1000CDS 2 . The L1000CDS 2 search engine provides prioritization of thousands of small-molecule signatures, and their pairwise combinations, predicted to either mimic or reverse an input gene expression signature using two methods. The L1000CDS 2 search engine also predicts drug targets for all the small molecules profiled by the L1000 assay that we processed. Targets are predicted by computing the cosine similarity between the L1000 small-molecule signatures and a large collection of signatures extracted from the gene expression omnibus (GEO) for single-gene perturbations in mammalian cells. We applied L1000CDS 2 to prioritize small molecules that are predicted to reverse expression in 670 disease signatures also extracted from GEO, and prioritized small molecules that can mimic expression of 22 endogenous ligand signatures profiled by the L1000 assay. As a case study, to further demonstrate the utility of L1000CDS 2 , we collected expression signatures from human cells infected with Ebola virus at 30, 60 and 120 min. Querying these signatures with L1000CDS 2 we identified kenpaullone, a GSK3B/CDK2 inhibitor that we show, in subsequent experiments, has a dose-dependent efficacy in inhibiting Ebola infection in vitro without causing cellular toxicity in human cell lines. In summary, the L1000CDS 2 tool can be applied in many biological and biomedical settings, while improving the extraction of

RANCANG BANGUN APLIKASI SMART CARD INTERFACE

OpenAIRE

I Putu Agus Swastika; Siti Saibah Pua Luka; Yanno Dwi Ananda

2012-01-01

Opportunity to development smart card -based application is quite large as the need for smart card technology in various fields of both business and government agencies and BUMN. One brand that is widely used smart card is a smart card type from a vendor production NFC ACR122U ACS (Advanced Card System Limited) because prices are relatively affordable, but fairly tough. At the Thesis is done, the ACS (Advanced Card System Limited) as a manufacturer of smart card vendor type ...

Development of a mini-mobile digital radiography system by using wireless smart devices.

Science.gov (United States)

Jeong, Chang-Won; Joo, Su-Chong; Ryu, Jong-Hyun; Lee, Jinseok; Kim, Kyong-Woo; Yoon, Kwon-Ha

2014-08-01

The current technologies that trend in digital radiology (DR) are toward systems using portable smart mobile as patient-centered care. We aimed to develop a mini-mobile DR system by using smart devices for wireless connection into medical information systems. We developed a mini-mobile DR system consisting of an X-ray source and a Complementary Metal-Oxide Semiconductor (CMOS) sensor based on a flat panel detector for small-field diagnostics in patients. It is used instead of the systems that are difficult to perform with a fixed traditional device. We also designed a method for embedded systems in the development of portable DR systems. The external interface used the fast and stable IEEE 802.11n wireless protocol, and we adapted the device for connections with Picture Archiving and Communication System (PACS) and smart devices. The smart device could display images on an external monitor other than the monitor in the DR system. The communication modules, main control board, and external interface supporting smart devices were implemented. Further, a smart viewer based on the external interface was developed to display image files on various smart devices. In addition, the advantage of operators is to reduce radiation dose when using remote smart devices. It is integrated with smart devices that can provide X-ray imaging services anywhere. With this technology, it can permit image observation on a smart device from a remote location by connecting to the external interface. We evaluated the response time of the mini-mobile DR system to compare to mobile PACS. The experimental results show that our system outperforms conventional mobile PACS in this regard.

SMART-1 - the lunar adventure begins

Science.gov (United States)

2003-08-01

preparation for future lunar and planetary exploration, we need to find resources and landing sites.” So, there are many unsolved questions about the Moon, even though six NASA Apollo missions and three unmanned Soviet spacecraft have landed on it and brought back rock samples. The far side of the Moon --the one that never faces Earth-- and the polar regions remain fairly unexplored. The existence of water on the Moon has also never been confirmed, although two orbiters in the 1990s found indirect evidence. We are not even sure how the Moon was formed. According to the most accepted theory, 4500 million years ago an asteroid the size of Mars collided with our planet, and the vapourised debris that went into space condensed to form the Moon. SMART-1 will map the Moon's topography, as well as the surface distribution of minerals such as pyroxenes, olivines, and feldspars. Also, an X-ray detector will identify key chemical elements in the lunar surface. These data will allow scientists to reconstruct the geological evolution of the Moon, and to search for traces of the impact with the giant asteroid. If the collision theory is right, the Moon should contain less iron than the Earth, in proportion to lighter elements such as magnesium and aluminium. By gauging the relative amounts of chemical elements comprehensively for the very first time, SMART-1 can make a significant contribution in resolving this issue. As for water, if it exists, it must be in the form of ice in places always hidden from the Sun. In such places, the temperature will never rise above -170ºC. Dark places like that could exist in the bottoms of small craters in the polar regions. Peering into these craters is maybe the trickiest task that the SMART-1 scientists have set themselves. They will look for the infrared signature of water- ice. It will be difficult because no direct light falls in those areas, but rays from nearby crater rims, catching the sunshine, may light the ice sufficiently for SMART-1

Smart Demand Response Based on Smart Homes

Directory of Open Access Journals (Sweden)

Jingang Lai

2015-01-01

Full Text Available Smart homes (SHs are crucial parts for demand response management (DRM of smart grid (SG. The aim of SHs based demand response (DR is to provide a flexible two-way energy feedback whilst (or shortly after the consumption occurs. It can potentially persuade end-users to achieve energy saving and cooperate with the electricity producer or supplier to maintain balance between the electricity supply and demand through the method of peak shaving and valley filling. However, existing solutions are challenged by the lack of consideration between the wide application of fiber power cable to the home (FPCTTH and related users’ behaviors. Based on the new network infrastructure, the design and development of smart DR systems based on SHs are related with not only functionalities as security, convenience, and comfort, but also energy savings. A new multirouting protocol based on Kruskal’s algorithm is designed for the reliability and safety of the SHs distribution network. The benefits of FPCTTH-based SHs are summarized at the end of the paper.

Electromagnetic Interference in Smart Grids

NARCIS (Netherlands)

Leferink, Frank; Keyer, Cees

2017-01-01

The increasing conducted interference caused by modern electronic equipment is causing more problems for electronic, or static, energy meters. If equipped with a communication link they are called smart meter. Because the smart meter is a key device in smart grids, any deviation has huge impact on

Smart TV and data protection

NARCIS (Netherlands)

van Breda, B.; van Eijk, N.; Irion, K.; McGonagle, T.; van Voorst, S.

2016-01-01

What is smart TV? How does smart TV compare with other forms of audiovisual media? What regulatory frameworks govern smart TV? What guidance can be found in selected country-specific case studies? What are the dangers associated with the collection, storage and processing of private user information

Smart Grid Integration Laboratory

Energy Technology Data Exchange (ETDEWEB)

Troxell, Wade [Colorado State Univ., Fort Collins, CO (United States)

2011-12-22

The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU's overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory's focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3

Identification of Clusters in Travel Patterns using Smart Card Data

DEFF Research Database (Denmark)

Reinau, Kristian Hegner; Harder, Henrik

2016-01-01

This article is the first contribution, which explores the potential of smart card data in relation to optimization of public transport in a peripheral monocentric region. A modularity analysis is made using smart card data collected in Northern Jutland in Marts and July 2014, and the analysis...... reveals first, that smart card data can be used to identify clusters within flows of public transport passengers in a peripheral region. Second, that the presence of such clusters suggest that public transport should be planned to give the users the possibility of travelling with good connectivity...... and easiness within these clusters. Third, the presence of such clusters in peripheral areas of the monocentric region suggest, that the overall current focus in public transport planning on transport possibilities to and from the central city in monocentric regions is questionable....

Smart meter incorporating UWB technology

NARCIS (Netherlands)

Khan, T.A.; Khan, A.B.; Babar, M.; Taj, T.A.

2014-01-01

Smart Meter is a key element in the evolving concept of Smart Grid, which plays an important role in interaction between the consumer and the supplier. In general, the smart meter is an intelligent digital energy meter that measures the consumption of electrical energy and provides other additional

What is a smart grid?

NARCIS (Netherlands)

Kumar, A.

2017-01-01

The Indian Smart Grid Forum defines a smart grid as "a power system capable of two-way communication between all the entities of the network-generation, transmission, distribution and the consumers". Like most work on smart grids, this view is also mainly technical. This paper aims to progress the

Smart Landscape. The architecture of the "micro smart grid" as a resilience strategy for landscape

OpenAIRE

Garbarini, Giulia

2018-01-01

“Smart Landscape”, starting from energy devices for the management and distribution of electricity resources, tends to define a possible vision of landscape. The main structure and process are based on the architecture of a “micro smart grid”, which is generally associated with urban energy grids and districts, but may become a figurative reference for new forms of landscape, such as “Smart Landscape”. The output of the research would be to show how the main strategies of “Smart Landsc...

Persona-based Adaptation in a Smart Green Home

NARCIS (Netherlands)

Havinga, P. (Paul); Leeuwen, van H. (Henk); Salomons, E. (Etto); Teeuw, W. (Wouter)

2012-01-01

In this paper Etto Salomons presents his vision of the GoGreen project on a smart home that is capable of decreasing energy consumption while at the same time increasing user comfort. To identify the main challenges he introduces a general model for intelligent homes that describes the current

Disseminating and Promoting Smart Farming Technologies –The SmartAKIS Network

NARCIS (Netherlands)

Tinker, D.; Kernecker, M.; Knierim, A.; Wurbs, A.; Wolters, Sandra; Evert, van F.K.; Bellostas, N.; Aït-Amar, S.; Balafoutis, T.; Fountas, S.

2017-01-01

This paper summarises the early stages of the Smart AKIS project which aims to collect and disseminate Smart Farming Technologies (SFT) in line with farmers' needs. The methodology of collecting information and opinions from over 270 farmers from seven countries about SFTs is given. The methodology

Comparative performance of various smart aggregates during strength gain and damage states of concrete

International Nuclear Information System (INIS)

Saravanan, T Jothi; Balamonica, K; Priya, C Bharathi; Gopalakrishnan, N; Reddy, A Likhith

2015-01-01

Information regarding the early strength gain of fresh concrete determines the time for the removal of form work and the transfer of pre-stressing forces for pre-stressed concrete. An ultrasonic based non-destructive evaluation of early strength gain may not work for concrete in fluid and semi-solid phases. A possible alternative is a lead zirconate titanate (PZT)-based smart aggregate embedded in concrete, which can evaluate the micro-structural and rheological properties right from the fluid phase. A set of five smart aggregates embedded in a concrete cube were investigated for their suitability to evaluate electromechanical impedance (EMI) signatures. Cubes were loaded to failure and the EMI during progressive strength loss under compressive loads was studied. To show the generalized applicability of this, experimental results for the performance of typical smart aggregates on a larger specimen, namely a concrete beam, are also discussed. Different statistical metrics were examined computationally on a three peak admittance curve with a parametric variation of stiffness, damping and simple scaling. The root mean square deviation (RMSD), mean absolute percentage deviation (MAPD), cross correlation (CC) and modified cross correlation (MCC) were investigated, in addition to the rate of change of the RMSD. Variations between the reference and modified states were studied. Both stiffness and mass gains occur for the smart aggregates, resulting in an increase or decrease of frequency and amplitude peaks due to progressive C-S-H gel formation. The trend of increasing stiffness and the consequent rightward shift of the resonant peaks and decrease of damping, with the consequent upward shift of amplitudes that happens during curing and strength gain, was observed to be reversed during the application of damaging loads. (paper)

Becoming a Smart Student

DEFF Research Database (Denmark)

Lundqvist, Ulla

identification” and “participation framework”. Methodologically, the study is based on three years of linguistic ethnographic fieldwork in a public primary school in Copenhagen and with students and their families. This study documents -in broad ethnographic scope and interactional detail -how smart student...... through future explorations of children’s academic trajectories in and out of school, and on how those trajectories often become linked to the trajectories of siblings, vis-à-vis institutional conceptions of smartness.......When teachers and students interact in everyday academic activities, some students are ascribed social roles as “smart”, which lead other students to contest these roles. Such struggles around what it means to be smart and which students come to be viewed as smart are a pertinent problem...

Ammonia chemistry at SMART

International Nuclear Information System (INIS)

Na, J. W.; Seong, G. W.; Lee, E. H.; Kim, W. C.; Choi, B. S.; Kim, J. P.; Lee, D. J.

1999-01-01

Ammonia is used as the pH control agent of primary water at SMART (System-integrated Modular Advanced ReacTor). Some of this ammonia is decomposed to hydrogen and nitrogen by radiation in the reactor core. The produced hydrogen gas is used for the removal of dissolved oxygen in the coolant. Some of nitrogen gas in pressurizer is dissolved into the primary water. Because ammonia, hydrogen and nitrogen which is produced by ammonia radiolysis are exist in the coolant at SMART, ammonia chemistry at SMART is different with lithium-boron chemistry at commercial PWR. In this study, the pH characteristics of ammonia and the solubility characteristics of hydrogen and nytrogen were analyzed for the management of primary water chemistry at SMART

Safety and regulatory researches on the SMART reactor

International Nuclear Information System (INIS)

Seul, Kwang Won; Kim, Wee Kyong; Chang, Moo Hee

2000-01-01

The 330 MW thermal power of integral pressurized water reactor, named SMART (System integrated Modular Advanced ReacTor), is under development at the Korea Atomic Energy Research Institute (KAERI) for seawater desalination application and electricity generation. The plant is expected to install near the population zone. Thus, the public around the plant should be in depth protected from the possible release of radioactive materials, and also the fresh water should be prevented from radioactivity contamination. Currently, in parallel with the design development, the regulatory research is being conducted to identify and resolve the safety concerns of the nuclear desalination plant. Until now, some general items to be considered in the safety aspects have been identified for the conceptual design of SMART. They include the use of proven technology, application of strengthening defense-in-depth, event categorization and selection, effects of desalination plant, and maintainability of major components. These cooperative researches with regulatory body in the design stage are expected to provide an opportunity to early resolve the safety concerns and eventually the licensing stability of the SMART design. (author)

Formal and legal conditions of Smart Grid deployment

Directory of Open Access Journals (Sweden)

Rafał Magulski

2010-04-01

Full Text Available This article presents an overview of the formal and legal issues arising from EU policies and national regulations affecting the capacity to implement Smart Grid solutions. EU legislation currently imposes on the Member States no obligation to apply any mechanisms to support implementation of Smart Grid solutions in the power sector. Directives call for the introduction of such national regulations that promote improved security and reliability of energy supply, development and integration of renewable and distributed energy resources with the power system, and development of the energy market to allow customers to respond to market incentives and to rationally change their behaviours as regards energy use. Not all of the obligations and recommendations have been fully transferred into the national legislation. However, directions of the Polish energy policy are in line with European trends and clearly indicate Smart Grids as one of the remedies to the challenges that the National Power System will have to cope with in the long term. Therefore, some significant legislative changes regarding the power sector should be expected in the near future.

Smart Icon Cards

Science.gov (United States)

Dunbar, Laura

2015-01-01

Icons are frequently used in the music classroom to depict concepts in a developmentally appropriate way for students. SmartBoards provide music educators yet another way to share these manipulatives with students. This article provides a step-by-step tutorial to create Smart Icon Cards using the folk song "Lucy Locket."

Development of Android based Smart Power Saving System

Science.gov (United States)

Gupta, Ashutosh; Kumar, Pradeep; Ghosh, Tathagata; Bhawna, Shruthi. S.

2017-08-01

An android based smart power saving system has been presented in this paper. For this purpose, an application is developed for controlling the intensity of an AC supply using a dimmer circuit in android platform and to monitor the current flow on different intensity level a current sensor is used in the circuit. Dimmer circuit provides a 16-different intensity level to control the flow of current and help in power saving. The system is very simple and robust as it is based on android platform.

Design of an Open Smart Energy Gateway for Smart Meter Data Management

Energy Technology Data Exchange (ETDEWEB)

Page, Janie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McParland, Chuck [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Czarnecki, Stephen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-03-01

With the widespread deployment of electronic interval meters, commonly known as smart meters, came the promise of real-time data on electric energy consumption. Recognizing an opportunity to provide consumers access to their near real-time energy consumption data directly from their installed smart meter, we designed a mechanism for capturing those data for consumer use via an open smart energy gateway (OpenSEG). By design, OpenSEG provides a clearly defined boundary for equipment and data ownership. OpenSEG is an open-source data management platform to enable better data management of smart meter data. Effectively, it is an information architecture designed to work with the ZigBee Smart Energy Profile 1.x (SEP 1.x). It was specifically designed to reduce cyber-security risks and provide secure information directly from smart meters to consumers in near real time, using display devices already owned by the consumers. OpenSEG stores 48 hours of recent consumption data in a circular cache using a format consistent with commonly available archived (not real-time) consumption data such as Green Button, which is based on the Energy Services Provider Interface (ESPI) data standard. It consists of a common XML format for energy usage information and a data exchange protocol to facilitate automated data transfer upon utility customer authorization. Included in the design is an application program interface by which users can acquire data from OpenSEG for further post processing. A sample data display application is included in the initial software product. The data display application demonstrates that OpenSEG can help electricity use data to be retrieved from a smart meter and ported to a wide variety of user-owned devices such as cell phones or a user-selected database. This system can be used for homes, multi-family buildings, or small commercial buildings in California.

Smart hydrogel functional materials

CERN Document Server

Chu, Liang-Yin; Ju, Xiao-Jie

2014-01-01

This book systematically introduces smart hydrogel functional materials with the configurations ranging from hydrogels to microgels. It serves as an excellent reference for designing and fabricating artificial smart hydrogel functional materials.

ThinkHome Energy Efficiency in Future Smart Homes

Directory of Open Access Journals (Sweden)

Reinisch Christian

2011-01-01

Full Text Available Abstract Smart homes have been viewed with increasing interest by both home owners and the research community in the past few years. One reason for this development is that the use of modern automation technology in the home or building promises considerable savings of energy, therefore, simultaneously reducing the operational costs of the building over its whole lifecycle. However, the full potential of smart homes still lies fallow, due to the complexity and diversity of the systems, badly engineered and configured installations, as well as the frequent problem of suboptimal control strategies. Summarized, these problems converge to two undesirable conditions in the "not-so-smart" home: energy consumption is still higher than actually necessary and users are unable to yield full comfort in their automated homes. This work puts its focus on alleviating the current problems by proposing a comprehensive system concept, that shall ensure that smart homes can keep their promise in the future. The system operates on an extensive knowledge base that stores all information needed to fulfill the goals of energy efficiency and user comfort. Its intelligence is implemented as and within a multiagent system that also caters for the system's openness to the outside world. As a first evaluation, a profile-based control strategy for thermal comfort is developed and verified by means of simulation.

Smart metering design and applications

CERN Document Server

Weranga, K S K; Chandima, D P

2013-01-01

Taking into account the present day trends and the requirements, this Brief focuses on smart metering of electricity for next generation energy efficiency and conservation. The contents include discussions on the smart metering concepts and existing technologies and systems as well as design and implementation of smart metering schemes together with detailed examples.

Triple-layer smart grid business model

DEFF Research Database (Denmark)

Ma, Zheng; Lundgaard, Morten; Jørgensen, Bo Nørregaard

2016-01-01

Viewing the smart grid with the theory of business models may open opportunities in understanding and capturing values in new markets. This study tries to discover and map the smart grid ecosystem-based business model framework with two different environments (sub-Saharan Africa and Denmark......), and identifies the parameters for the smart grid solutions to the emerging markets. This study develops a triple-layer business model including the organizational (Niche), environmental (Intermediate), and global (Dominators) factors. The result uncovers an interface of market factors and stakeholders...... in a generic smart grid constellation. The findings contribute the transferability potential of the smart grid solutions between countries, and indicate the potential to export and import smart grid solutions based on the business modeling....

Current On-Campus Attitudes toward Energy Usage, Efficiency, and Emerging Technologies

Energy Technology Data Exchange (ETDEWEB)

Lennon, Liz [Manhattan College NY, NY 10471; Stevens Institute of Technology Hoboken, NJ 07030; Manhattan College NY, NY 10471; Sintov, Nicole [USC Information Sciences Institute Marina del Rey, CA 90292; Orosz, Michael [USC Information Sciences Institute Marina del Rey, CA 90292

2016-10-01

Context & Background for Energy Survey Methods & Survey Overview Respondent Demographics Results Demand Response Current Environmental Comfort Perceptions Smart Meters Perceived Smart Meter Benefits Motivators of Energy Efficient Practices Summary & Implications

32 x 16 CMOS smart pixel array for optical interconnects

Science.gov (United States)

Kim, Jongwoo; Guilfoyle, Peter S.; Stone, Richard V.; Hessenbruch, John M.; Choquette, Kent D.; Kiamilev, Fouad E.

2000-05-01

Free space optical interconnects can increase throughput capacities and eliminate much of the energy consumption required for `all electronic' systems. High speed optical interconnects can be achieved by integrating optoelectronic devices with conventional electronics. Smart pixel arrays have been developed which use optical interconnects. An individual smart pixel cell is composed of a vertical cavity surface emitting laser (VCSEL), a photodetector, an optical receiver, a laser driver, and digital logic circuitry. Oxide-confined VCSELs are being developed to operate at 850 nm with a threshold current of approximately 1 mA. Multiple quantum well photodetectors are being fabricated from AlGaAs for use with the 850 nm VCSELs. The VCSELs and photodetectors are being integrated with complementary metal oxide semiconductor (CMOS) circuitry using flip-chip bonding. CMOS circuitry is being integrated with a 32 X 16 smart pixel array. The 512 smart pixels are serially linked. Thus, an entire data stream may be clocked through the chip and output electrically by the last pixel. Electrical testing is being performed on the CMOS smart pixel array. Using an on-chip pseudo random number generator, a digital data sequence was cycled through the chip verifying operation of the digital circuitry. Although, the prototype chip was fabricated in 1.2 micrometers technology, simulations have demonstrated that the array can operate at 1 Gb/s per pixel using 0.5 micrometers technology.

Preliminary Study on the Establishment of Regulatory Infrastructure for a Commercial SMART Licensing

International Nuclear Information System (INIS)

Yune, Young Gill; Roh, Kyung Wan; Kang, Dong Gu; Kim, Hho Jung; Jo, Jong Chull

2007-01-01

The SMART, an integral type of PWR with the capacity of 330MWth, has been developed for multi-purposes such as seawater desalination, ship propulsion, and district heating in Korea since early 1990s. The basic design of the SMART had been completed in 2002. For the demonstration of the safety and performance of the SMART, a project to construct a 1/5 scaled-down prototype reactor with capacity of 65MWth, called as SMART-P(SMART Pilot Plant), has been performed from 2002 to 2006. However, in 2006, the project to construct the SMART-P was replaced with a preliminary project to develop a commercial SMART in order to advance commercialization of the SMART. Since the SMART is the first commercial reactor adopting the integral design concept and new system/components such as passive residual heat removal system, canned motor pump, and helical tube steam generator in Korea, some verification tests need to be performed to demonstrate the safety and performance of the SMART. Also, since several new design computer codes that have not yet been confirmed by the regulatory body are expected to be used in the design, some validation tests should be performed to demonstrate their applicability for important accident phenomena. In order to carry out the SMART development project satisfactorily and to prevent any undesirable delay of licensing process, it is necessary to establish a well-planned verification test program in advance through the early identification of the scope and items of the verification tests. Also, the issues for which either policy decision-makings or detailed technical evaluations are needed should be identified in an early stage of design, and the regulatory positions for the issues should be provided either timely or in advance. Advance identification of regulatory requirements/guides to be amended or newly developed enables to provide regulatory directions for such items in the early stage of design. The objective of this paper is to introduce the current

Preliminary Study on the Establishment of Regulatory Infrastructure for a Commercial SMART Licensing

Energy Technology Data Exchange (ETDEWEB)

Yune, Young Gill; Roh, Kyung Wan; Kang, Dong Gu; Kim, Hho Jung; Jo, Jong Chull [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2007-10-15

The SMART, an integral type of PWR with the capacity of 330MWth, has been developed for multi-purposes such as seawater desalination, ship propulsion, and district heating in Korea since early 1990s. The basic design of the SMART had been completed in 2002. For the demonstration of the safety and performance of the SMART, a project to construct a 1/5 scaled-down prototype reactor with capacity of 65MWth, called as SMART-P(SMART Pilot Plant), has been performed from 2002 to 2006. However, in 2006, the project to construct the SMART-P was replaced with a preliminary project to develop a commercial SMART in order to advance commercialization of the SMART. Since the SMART is the first commercial reactor adopting the integral design concept and new system/components such as passive residual heat removal system, canned motor pump, and helical tube steam generator in Korea, some verification tests need to be performed to demonstrate the safety and performance of the SMART. Also, since several new design computer codes that have not yet been confirmed by the regulatory body are expected to be used in the design, some validation tests should be performed to demonstrate their applicability for important accident phenomena. In order to carry out the SMART development project satisfactorily and to prevent any undesirable delay of licensing process, it is necessary to establish a well-planned verification test program in advance through the early identification of the scope and items of the verification tests. Also, the issues for which either policy decision-makings or detailed technical evaluations are needed should be identified in an early stage of design, and the regulatory positions for the issues should be provided either timely or in advance. Advance identification of regulatory requirements/guides to be amended or newly developed enables to provide regulatory directions for such items in the early stage of design. The objective of this paper is to introduce the current

SMART Boards Rock

Science.gov (United States)

Giles, Rebecca M.; Shaw, Edward L.

2011-01-01

SMART Board is a technology that combines the functionality of a whiteboard, computer, and projector into a single system. The interactive nature of the SMART Board offers many practical uses for providing an introduction to or review of material, while the large work area invites collaboration through social interaction and communication. As a…

Mini Smart Grid @ Copenhagen Business School

DEFF Research Database (Denmark)

Pedersen, Rasmus U.; Furtak, Simon J.; Häuser, Ivan

2013-01-01

Project Smart Grid: The Intelligent Electrical System Is the Way Forward In 2012 Peter Møllgaard from Department of Economics and Rasmus Pedersen from Department of IT Management initiated a new project supported by CBS Sustainability Platform. The purpose of the project is to establish an unders......Project Smart Grid: The Intelligent Electrical System Is the Way Forward In 2012 Peter Møllgaard from Department of Economics and Rasmus Pedersen from Department of IT Management initiated a new project supported by CBS Sustainability Platform. The purpose of the project is to establish...... an understanding of micro-economic and IT challenges related to Smart Grid technology. The mini-smart-grid project at Copenhagen Business School (MSC@CBS) project seeks to investigate the business opportunities and issues that arise from this new technology. The project revolves around the concepts of Smart Grids......, Smart Meters and prosumers. Smart Grids are a new method of managing electricity and power supply. It has not reached its full potential yet, but it offers a more interactive platform for both the consumer and the main supplier e.g. Dong Energy. The Smart Grid will collect and control the behavior...

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture.

Science.gov (United States)

Zheng, Song; Zhang, Qi; Zheng, Rong; Huang, Bi-Qin; Song, Yi-Lin; Chen, Xin-Chu

2017-09-16

In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome) based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

Science.gov (United States)

Zheng, Song; Zhang, Qi; Zheng, Rong; Huang, Bi-Qin; Song, Yi-Lin; Chen, Xin-Chu

2017-01-01

In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome) based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices. PMID:28926957

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

Directory of Open Access Journals (Sweden)

Song Zheng

2017-09-01

Full Text Available In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

Research Advance in Smart Metamaterials

Directory of Open Access Journals (Sweden)

YU Xiang-long

2016-07-01

Full Text Available Metamaterials, man-made materials, enable us to design our own "atoms", and thereby to create materials with unprecedented effective properties that have not yet been found in nature. Smart metamaterial is one of those that is an intelligent perceptive to the changes from external environments and simultaneously having the capability to respond to thermal and mechanical stimuli. This paper can provide a review on these smart metamaterials in perspective of science, engineering and industrial products. We divide smart metamaterials according to what they are tuning into: optical, mechanical, thermal and coupled smart metamaterials. The rest of two techniques we addressed are modelling/simulation and fabrication/gene engineering. All of these types smart materials presented here are associated with at least five fundamental research: coupled mechanism of multi-physics fields, man-made design for atom/molecular, metamaterials coupled with natural materials, tunability of metamaterials, and mechanism of sensing metamaterials. Therefore, we give a systematic overview of various potential smart metamaterials together with the upcoming challenges in the intriguing and promising research field.

Smart-tag Based Data Dissemination

DEFF Research Database (Denmark)

Bonnet, Philippe; Beaufour, Allan; Leopold, Martin

2002-01-01

Monitoring wide, hostile areas requires disseminating data between fixed, disconnected clusters of sensor nodes. It is not always possible to install long-range radios in order to cover the whole area. We propose to leverage the movement of mobile individuals, equipped with smart-tags, to dissemi......-tag based data dissemination. We use simulation to study the characteristics of the model we propose. Finally, we present an implementation based on Bluetooth smart-tags.......Monitoring wide, hostile areas requires disseminating data between fixed, disconnected clusters of sensor nodes. It is not always possible to install long-range radios in order to cover the whole area. We propose to leverage the movement of mobile individuals, equipped with smart......-tags, to disseminate data across disconnected static nodes spread across a wide area. Static nodes and mobile smart-tags exchange data when they are in the vicinity of each other; smart-tags disseminate data as they move around. In this paper, we propose an algorithm for update propagation and a model for smart...

Electrical Market Management Considering Power System Constraints in Smart Distribution Grids

Directory of Open Access Journals (Sweden)

Poria Hasanpor Divshali

2016-05-01

Full Text Available Rising demand, climate change, growing fuel costs, outdated power system infrastructures, and new power generation technologies have made renewable distribution generators very attractive in recent years. Because of the increasing penetration level of renewable energy sources in addition to the growth of new electrical demand sectors, such as electrical vehicles, the power system may face serious problems and challenges in the near future. A revolutionary new power grid system, called smart grid, has been developed as a solution to these problems. The smart grid, equipped with modern communication and computation infrastructures, can coordinate different parts of the power system to enhance energy efficiency, reliability, and quality, while decreasing the energy cost. Since conventional distribution networks lack smart infrastructures, much research has been recently done in the distribution part of the smart grid, called smart distribution grid (SDG. This paper surveys contemporary literature in SDG from the perspective of the electricity market in addition to power system considerations. For this purpose, this paper reviews current demand side management methods, supply side management methods, and electrical vehicle charging and discharging techniques in SDG and also discusses their drawbacks. We also present future research directions to tackle new and existing challenges in the SDG.

Secure Plug-in Electric Vehicle PEV Charging in a Smart Grid Network

Directory of Open Access Journals (Sweden)

Khaled Shuaib

2017-07-01

Full Text Available Charging of plug-in electric vehicles (PEVs exposes smart grid systems and their users to different kinds of security and privacy attacks. Hence, a secure charging protocol is required for PEV charging. Existing PEV charging protocols are usually based on insufficiently represented and simplified charging models that do not consider the user’s charging modes (charging at a private location, charging as a guest user, roaming within one’s own supplier network or roaming within other suppliers’ networks. However, the requirement for charging protocols depends greatly on the user’s charging mode. Consequently, available solutions do not provide complete protocol specifications. Moreover, existing protocols do not support anonymous user authentication and payment simultaneously. In this paper, we propose a comprehensive end-to-end charging protocol that addresses the security and privacy issues in PEV charging. The proposed protocol uses nested signatures to protect users’ privacy from external suppliers, their own suppliers and third parties. Our approach supports anonymous user authentication, anonymous payment, as well as anonymous message exchange between suppliers within a hierarchical smart grid architecture. We have verified our protocol using the AVISPA software verification tool and the results showed that our protocol is secure and works as desired.

Internet of Things Platform for Smart Farming: Experiences and Lessons Learnt.

Science.gov (United States)

Jayaraman, Prem Prakash; Yavari, Ali; Georgakopoulos, Dimitrios; Morshed, Ahsan; Zaslavsky, Arkady

2016-11-09

Improving farm productivity is essential for increasing farm profitability and meeting the rapidly growing demand for food that is fuelled by rapid population growth across the world. Farm productivity can be increased by understanding and forecasting crop performance in a variety of environmental conditions. Crop recommendation is currently based on data collected in field-based agricultural studies that capture crop performance under a variety of conditions (e.g., soil quality and environmental conditions). However, crop performance data collection is currently slow, as such crop studies are often undertaken in remote and distributed locations, and such data are typically collected manually. Furthermore, the quality of manually collected crop performance data is very low, because it does not take into account earlier conditions that have not been observed by the human operators but is essential to filter out collected data that will lead to invalid conclusions (e.g., solar radiation readings in the afternoon after even a short rain or overcast in the morning are invalid, and should not be used in assessing crop performance). Emerging Internet of Things (IoT) technologies, such as IoT devices (e.g., wireless sensor networks, network-connected weather stations, cameras, and smart phones) can be used to collate vast amount of environmental and crop performance data, ranging from time series data from sensors, to spatial data from cameras, to human observations collected and recorded via mobile smart phone applications. Such data can then be analysed to filter out invalid data and compute personalised crop recommendations for any specific farm. In this paper, we present the design of SmartFarmNet, an IoT-based platform that can automate the collection of environmental, soil, fertilisation, and irrigation data; automatically correlate such data and filter-out invalid data from the perspective of assessing crop performance; and compute crop forecasts and personalised

Internet of Things Platform for Smart Farming: Experiences and Lessons Learnt