WorldWideScience

Sample records for slic simple line

  1. Source Lines Counter (SLiC) Version 4.0

    Science.gov (United States)

    Monson, Erik W.; Smith, Kevin A.; Newport, Brian J.; Gostelow, Roli D.; Hihn, Jairus M.; Kandt, Ronald K.

    2011-01-01

    Source Lines Counter (SLiC) is a software utility designed to measure software source code size using logical source statements and other common measures for 22 of the programming languages commonly used at NASA and the aerospace industry. Such metrics can be used in a wide variety of applications, from parametric cost estimation to software defect analysis. SLiC has a variety of unique features such as automatic code search, automatic file detection, hierarchical directory totals, and spreadsheet-compatible output. SLiC was written for extensibility; new programming language support can be added with minimal effort in a short amount of time. SLiC runs on a variety of platforms including UNIX, Windows, and Mac OSX. Its straightforward command-line interface allows for customization and incorporation into the software build process for tracking development metrics. T

  2. BSLIC: SLIC Superpixels Based on Boundary Term

    Directory of Open Access Journals (Sweden)

    Hai Wang

    2017-02-01

    Full Text Available A modified method for better superpixel generation based on simple linear iterative clustering (SLIC is presented and named BSLIC in this paper. By initializing cluster centers in hexagon distribution and performing k-means clustering in a limited region, the generated superpixels are shaped into regular and compact hexagons. The additional cluster centers are initialized as edge pixels to improve boundary adherence, which is further promoted by incorporating the boundary term into the distance calculation of the k-means clustering. Berkeley Segmentation Dataset BSDS500 is used to qualitatively and quantitatively evaluate the proposed BSLIC method. Experimental results show that BSLIC achieves an excellent compromise between boundary adherence and regularity of size and shape. In comparison with SLIC, the boundary adherence of BSLIC is increased by at most 12.43% for boundary recall and 3.51% for under segmentation error.

  3. Dynamic mental number line in simple arithmetic.

    Science.gov (United States)

    Yu, Xiaodan; Liu, Jie; Li, Dawei; Liu, Hang; Cui, Jiaxin; Zhou, Xinlin

    2016-05-01

    Studies have found that spatial-numerical associations could extend to arithmetic. Addition leads to rightward shift in spatial attention while subtraction leads to leftward shift (e.g., Knops et al. 2009; McCrink et al. 2007; Pinhas & Fischer 2008), which is consistent with the hypothesis of static mental number line (MNL) for arithmetic. The current investigation tested the hypothesis of dynamic mental number line which was shaped by the relative magnitudes of two operands in simple arithmetic. Horizontal and vertical electrooculograms (HEOG and VEOG) during simple arithmetic were recorded. Results showed that the direction of eye movements was dependent on the relative magnitudes of two operands. Subtraction was associated with larger rightward eye movements than addition (Experiment 1), and smaller-operand-first addition (e.g., 2+9) was associated with larger rightward eye movement than larger-operand-first addition (e.g., 9+2) only when the difference of two operands was large (Experiment 2). The results suggest that the direction of the mental number line could be dynamic during simple arithmetic, and that the eyes move along the dynamic mental number line to search for solutions.

  4. Slic Superpixels for Object Delineation from Uav Data

    Science.gov (United States)

    Crommelinck, S.; Bennett, R.; Gerke, M.; Koeva, M. N.; Yang, M. Y.; Vosselman, G.

    2017-08-01

    Unmanned aerial vehicles (UAV) are increasingly investigated with regard to their potential to create and update (cadastral) maps. UAVs provide a flexible and low-cost platform for high-resolution data, from which object outlines can be accurately delineated. This delineation could be automated with image analysis methods to improve existing mapping procedures that are cost, time and labor intensive and of little reproducibility. This study investigates a superpixel approach, namely simple linear iterative clustering (SLIC), in terms of its applicability to UAV data. The approach is investigated in terms of its applicability to high-resolution UAV orthoimages and in terms of its ability to delineate object outlines of roads and roofs. Results show that the approach is applicable to UAV orthoimages of 0.05 m GSD and extents of 100 million and 400 million pixels. Further, the approach delineates the objects with the high accuracy provided by the UAV orthoimages at completeness rates of up to 64 %. The approach is not suitable as a standalone approach for object delineation. However, it shows high potential for a combination with further methods that delineate objects at higher correctness rates in exchange of a lower localization quality. This study provides a basis for future work that will focus on the incorporation of multiple methods for an interactive, comprehensive and accurate object delineation from UAV data. This aims to support numerous application fields such as topographic and cadastral mapping.

  5. The Structured Intuitive Model for Product Line Economics (SIMPLE)

    National Research Council Canada - National Science Library

    Clements, Paul C; McGregor, John D; Cohen, Sholom G

    2005-01-01

    .... This report presents the Structured Intuitive Model of Product Line Economics (SIMPLE), a general-purpose business model that supports the estimation of the costs and benefits in a product line development organization...

  6. SLIC superpixels for efficient graph-based dimensionality reduction of hyperspectral imagery

    Science.gov (United States)

    Zhang, Xuewen; Chew, Selene E.; Xu, Zhenlin; Cahill, Nathan D.

    2015-05-01

    Nonlinear graph-based dimensionality reduction algorithms such as Laplacian Eigenmaps (LE) and Schroedinger Eigenmaps (SE) have been shown to be very effective at yielding low-dimensional representations of hyperspectral image data. However, the steps of graph construction and eigenvector computation required by LE and SE can be prohibitively costly as the number of image pixels grows. In this paper, we propose pre-clustering the hyperspectral image into Simple Linear Iterative Clustering (SLIC) superpixels and then performing LE- or SE-based dimensionality reduction with the superpixels as input. We then investigate how different superpixel size and regularity choices yield trade-offs between improvements in computational efficiency and accuracy of subsequent classification using the low-dimensional representations.

  7. Evaluation of the SLICS use in the treatment of subaxial cervical spine injuries

    Directory of Open Access Journals (Sweden)

    Halisson Y. F. da Cruz

    2015-05-01

    Full Text Available The SLICS (Sub-axial Cervical Spine Injury Classification System was proposed to help in the decision-making of sub-axial cervical spine trauma (SCST, even though the literature assessing its safety and efficacy is scarce. Method We compared a cohort series of patients surgically treated based on surgeon’s preference with patients treated based on the SLICS. Results From 2009-10, 12 patients were included. The SLICS score ranged from 2 to 9 points (mean of 5.5. Two patients had the SLICS < 4 points. From 2011-13, 28 patients were included. The SLICS score ranged from 4 to 9 points (mean of 6. There was no neurological deterioration in any group. Conclusion After using the SLICS there was a decrease in the number of patients with less severe injuries that were treated surgically. This suggests that the SLICS can be helpful in differentiating mild from severe injuries, potentially improving the results of treatment.

  8. Verification of dose delivery for a prostate sIMRT treatment using a SLIC-EPID

    Energy Technology Data Exchange (ETDEWEB)

    Mohammadi, Mohammad [Department of Medical Physics, Faculty of Medicine, Hamadan University of Medical Sciences, Hamadan (Iran, Islamic Republic of)], E-mail: Mohammadi@umsha.ac.ir; Bezak, Eva; Reich, Paul [Department of Medical Physics, Royal Adelaide Hospital, Adelaide, SA 5000 (Australia); Department of Physics and Mathematical Physics, University of Adelaide, Adelaide, SA 5000 (Australia)

    2008-12-15

    The current work focuses on the verification of transmitted dose maps, measured using a scanning liquid ionization chamber-electronic portal imaging device (SLIC-EPID) for a typical step-and-shoot prostate IMRT treatment using an anthropomorphic phantom at anterior-posterior (A-P), and several non-zero gantry angles. The dose distributions measured using the SLIC-EPID were then compared with those calculated in the modelled EPID for each segment/subfield and also for the corresponding total fields using a gamma function algorithm with a distance to agreement and dose difference criteria of 2.54 mm and 3%, respectively.

  9. On-line learning through simple perceptron with a margin

    OpenAIRE

    Hara, Kazuyuki; Okada, Masato

    2003-01-01

    We analyze a learning method that uses a margin $\\kappa$ {\\it a la} Gardner for simple perceptron learning. This method corresponds to the perceptron learning when $\\kappa=0$, and to the Hebbian learning when $\\kappa \\to \\infty$. Nevertheless, we found that the generalization ability of the method was superior to that of the perceptron and the Hebbian methods at an early stage of learning. We analyzed the asymptotic property of the learning curve of this method through computer simulation and...

  10. Performance evaluation of simple linear iterative clustering algorithm on medical image processing.

    Science.gov (United States)

    Cong, Jinyu; Wei, Benzheng; Yin, Yilong; Xi, Xiaoming; Zheng, Yuanjie

    2014-01-01

    Simple Linear Iterative Clustering (SLIC) algorithm is increasingly applied to different kinds of image processing because of its excellent perceptually meaningful characteristics. In order to better meet the needs of medical image processing and provide technical reference for SLIC on the application of medical image segmentation, two indicators of boundary accuracy and superpixel uniformity are introduced with other indicators to systematically analyze the performance of SLIC algorithm, compared with Normalized cuts and Turbopixels algorithm. The extensive experimental results show that SLIC is faster and less sensitive to the image type and the setting superpixel number than other similar algorithms such as Turbopixels and Normalized cuts algorithms. And it also has a great benefit to the boundary recall, the robustness of fuzzy boundary, the setting superpixel size and the segmentation performance on medical image segmentation.

  11. Efficacy comparison between simple mixed-dilution and simple mid-dilution on-line hemodiafiltration techniques: a crossover study.

    Science.gov (United States)

    Susantitaphong, Paweena; Tiranathanagul, Khajohn; Katavetin, Pisut; Hanwiwatwong, Orawadee; Wittayalertpanya, Supeecha; Praditpornsilpa, Kearkiat; Tungsanga, Kriang; Eiam-Ong, Somchai

    2012-12-01

    Mid-dilution and mixed-dilution on-line hemodiafiltration (OL-HDF) techniques are innovated to overcome the limitations of two standard techniques including predilution and postdilution. Unfortunately, the head-to-head comparisons between these two novel techniques in the same study are still limited. Moreover, the original mid-dilution and mixed-dilution OL-HDF need special dialyzers and special machines. In the present study, simple mid-dilution and simple mixed-dilution OL-HDF were settled with the aim for clinical use in general hemodialysis (HD) centers. The efficacies of uremic toxins removal between both modalities were measured and compared. This prospective randomized crossover study was conducted on 12 stable HD patients undergoing simple mixed-dilution and simple mid-dilution OL-HDF techniques. HD prescriptions were similar in both techniques. The dialysis efficacies were determined by calculating small- (urea, creatinine, and phosphate) and middle-molecule (beta-2 microglobulin [β2M]) removal. Moreover, potential complications such as high transmembrane pressure (TMP) and protein loss were also observed. Simple mixed-dilution OL-HDF provided significantly greater clearances of urea, creatinine, and β2M when compared with the simple mid-dilution OL-HDF techniques. Phosphate clearances in both techniques were comparable. In addition, TMP and dialysate albumin loss were not different. There were no intradialytic complications in both techniques. Simple mixed-dilution OL-HDF could provide greater efficacy for small- and middle-molecule clearances and acceptable potential risks, while phosphate removal is comparable. © 2012, Copyright the Authors. Artificial Organs © 2012, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

  12. A simple procedure for estimating SN-lines for crack initiation from SN-lines for total failure

    Energy Technology Data Exchange (ETDEWEB)

    Sonsino, Cetin Morris [Fraunhofer Institute for Structural Durability and System Reliability (LBF), Darmstadt (Germany)

    2015-02-01

    A simple procedure is proposed for estimating the SN-line for the failure criterion of fatigue life to crack initiation of components not subjected to a surface treatment. The prerequisite is the availability of a SN-line for total failure, i.e. rupture, with the scatter-band T{sub σ} between the probabilities of survival P{sub s} = 10 and 90 %, the knee point N{sub k} and the slopes k{sub f} and k* before and after the knee point. The SN-line for crack initiation with P{sub s} = 50 % is positioned at the knee point N{sub k} of the SN-line with P{sub s} = 90 % for total failure. The slope kcr for N < N{sub k} cycles results from the exponent of the elastic portion of the strain controlled SN-line for crack initiation, obtained with unnotched specimens, and the slope k* after the knee point remains the same as that for the line for total failure. The SN-line for crack initiation possesses the same scatter-band T{sub σ} as the line for total failure.

  13. Nested separatrices in simple shear flows: the effect of localized disturbances on stagnation lines

    OpenAIRE

    Wilson, M.C.T.; Gaskell, P.H.; Savage, M.D.

    2005-01-01

    The effects of localized two-dimensional disturbances on the structure of shear flows featuring a stagnation line are investigated. A simple superposition of a planar Couette flow and Moffatt's [J. Fluid Mech. 18, 1--18 (1964)] streamfunction for the decay of a disturbance between infinite stationary parallel plates shows that in general the stagnation line is replaced by a chain of alternating elliptic and hyperbolic stagnation points with a separation equal to 2.78 times the half-gap betwee...

  14. A simple method for obtaining a uniform thickness for long-term soft denture linings.

    Science.gov (United States)

    Reeson, M G; Jepson, N J

    1998-03-01

    The thickness of long-term soft denture linings influences both their compliance and durability. Increasing the thickness of the lining material increases its perceived softness but makes the restoration more likely to fail through weakening of the acrylic resin denture base. Such effects have led to broad recommendations as to an appropriate thickness, advice that assumes a constant thickness of the lining material within the same denture. Several procedures used to produce such a constant thickness have been described. The necessary spacer is produced by manually adapting materials in their plastic state to the cast. Such procedures are liable to distortion and variation in spacer thickness and can be considered unreliable. This article describes a method for obtaining a uniform thickness of soft denture lining through the use of a vacuum-formed, thermoplastic blank as a spacer. The method is simple, applicable to all ridge forms, and reliably results in a soft lining of a known, uniform thickness. The method can be applied to long-term soft linings placed in both old and newly fabricated dentures. The spacer can be modified to allow variations in the prescribed extension of the soft lining within the denture base.

  15. Isoviscosity lines and the liquid-glass transition in simple liquids.

    Science.gov (United States)

    Fomin, Yu D; Brazhkin, V V; Ryzhov, V N

    2012-07-01

    This article presents the study of the generic behavior of viscosity of liquids based on some simple theoretical models, the soft-spheres and Lennard-Jones systems. The use of these simple models allows us to investigate in detail the viscosity behavior in a wide range of temperatures and pressures including the high-temperature-high-pressure limits. Based on the simulation results, we discuss the shape of isoviscosity lines and analyze the glass transition at high temperatures and high pressures. Despite the fact that the viscosity drastically increases in the limit of high temperatures and high pressures along the melting line, the relaxation time rapidly decreases in this region, and the system becomes further from the glass transition.

  16. A simple approach to the prediction of waterhammer transients in a pipe line with entrapped air

    International Nuclear Information System (INIS)

    Epstein, Michael

    2008-01-01

    The pressure histories within entrapped air bubbles in a pipe line during a waterhammer transient are treated theoretically. A convenient integral method is introduced, which takes full account of air/water interface movement and liquid compressibility. The significance of the method is that it provides a simple equation set for approximating, with good accuracy and with a small degree of conservatism, the solution to a problem that otherwise involves coupled partial differential equations on time dependent domains with non-linear boundary conditions. The accuracy of the method is defined by its comparison with available numerical-solution-predictions and measurements of the pressure within an entrapped-air-bubble at a dead end in a pipe. The method is shown to be a computationally simple and efficient way of assessing the impact of liquid compressibility on pressure rise when multiple water columns and air pockets are present in a pipe line

  17. On-line learning of non-monotonic rules by simple perceptron

    OpenAIRE

    Inoue, Jun-ichi; Nishimori, Hidetoshi; Kabashima, Yoshiyuki

    1997-01-01

    We study the generalization ability of a simple perceptron which learns unlearnable rules. The rules are presented by a teacher perceptron with a non-monotonic transfer function. The student is trained in the on-line mode. The asymptotic behaviour of the generalization error is estimated under various conditions. Several learning strategies are proposed and improved to obtain the theoretical lower bound of the generalization error.

  18. A simple model for predicting solute concentration in agricultural tile lines shortly after application

    Directory of Open Access Journals (Sweden)

    T. S. Steenhuis

    1997-01-01

    Full Text Available Agricultural tile drainage lines have been implicated as a source of pesticide contamination of surface waters. Field experiments were conducted and a simple model was developed to examine preferential transport of applied chemicals to agricultural tile lines. The conceptual model consists of two linear reservoirs, one near the soil surface and one near the tile drain. The connection between the two reservoirs is via preferential flow paths with very little interaction with the soil matrix. The model assumes that only part of the field contributes solutes to the tile drain. The model was evaluated with data from the field experiments in which chloride, 2,4-D, and atrazine concentrations were measured on eight tile-drained plots that were irrigated twice. Atrazine was applied two months prior to the experiment, 2,4-D was sprayed just before the first irrigation, and chloride before the second irrigation. All three chemicals were found in the tile effluent shortly after the rainfall began. Generally, the concentration increased with increased flow rates and decreased exponentially after the rainfall ceased. Although the simple model could simulate the observed chloride concentration patterns in the tile outflow for six of the eight plots, strict validation was not possible because of the difficulty with independent measurement of the data needed for a preferential flow model applied to field conditions. The results show that, to simulate pesticide concentration in tile lines, methods that can measure field averaged preferential flow characteristics need to be developed.

  19. Depth estimation from multi-scale SLIC superpixels using non-parametric learning

    Science.gov (United States)

    Jiang, Yifeng; Zhu, Yuesheng; Qing, Yin; Yang, Fan

    2017-07-01

    This study introduces a novel depth estimation method that can automatically generate plausible depth map from a single image with unstructured environment. Our goal is to extrapolate depth map with more correct, rich, and distinct depth order, which is both quantitatively accurate as well as visually pleasing. Based on the preexisting DepthTransfer algorithm, our approach primarily transfers depth information at the level of superpixels from the most photometrically similar retrieval images under the framework of non-parametric learning. Posteriorly, we propose to concurrently warp the corresponding superpixels in multi-scale levels, where we employ an improved SLIC technique to segment the RGBD images from coarse to fine. Then, modified Cross Bilateral Filter is leveraged to refine the final depth field. With respect to training and evaluation, we perform our experiment on the popular Make3D dataset and demonstrate that our method outperforms the state-of-the-art in both efficacy and computational efficiency. Especially, the final results show that in qualitatively evaluation, our results are visually superior in realism and simultaneously more immersive.

  20. NMR SLIC Sensing of Hydrogenation Reactions Using Parahydrogen in Low Magnetic Fields

    Science.gov (United States)

    2016-01-01

    Parahydrogen-induced polarization (PHIP) is an NMR hyperpolarization technique that increases nuclear spin polarization by orders of magnitude, and it is particularly well-suited to study hydrogenation reactions. However, the use of high-field NMR spectroscopy is not always possible, especially in the context of potential industrial-scale reactor applications. On the other hand, the direct low-field NMR detection of reaction products with enhanced nuclear spin polarization is challenging due to near complete signal cancellation from nascent parahydrogen protons. We show that hydrogenation products prepared by PHIP can be irradiated with weak (on the order of spin–spin couplings of a few hertz) alternating magnetic field (called Spin-Lock Induced Crossing or SLIC) and consequently efficiently detected at low magnetic field (e.g., 0.05 T used here) using examples of several types of organic molecules containing a vinyl moiety. The detected hyperpolarized signals from several reaction products at tens of millimolar concentrations were enhanced by 10000-fold, producing NMR signals an order of magnitude greater than the background signal from protonated solvents. PMID:28066517

  1. A FAST AND SIMPLE METHOD OF BUILDING DETECTION FROM LIDAR DATA BASED ON SCAN LINE ANALYSIS

    Directory of Open Access Journals (Sweden)

    X. Hu

    2013-05-01

    Full Text Available One of the major problems in processing LiDAR (Light Detection And Ranging data is its huge data volume which causes very high computational load when dealing with large areas with high point density. A fast and simple algorithm based on scan line analysis is proposed for automatic detection of building points from LiDAR data. At first, ground/non-ground classification is performed to filter out the ground points. Douglas–Peucker algorithm is then used to segment the scan line into segment objects based on height variation. These objects are preliminarily classified into buildings and vegetation based on local analysis using simple rules. At last, the region growing method is used to improve the quality of the extraction. The test data provided by the ISPRS test project on urban object extraction, containing a lot of buildings with complex roof structures, various sizes, and different heights, is used to test the algorithm. The experimental results show that the proposed algorithm can extract building regions effectively.

  2. a Fast and Simple Method of Building Detection from LIDAR Data Based on Scan Line Analysis

    Science.gov (United States)

    Hu, X.; Ye, L.

    2013-05-01

    One of the major problems in processing LiDAR (Light Detection And Ranging) data is its huge data volume which causes very high computational load when dealing with large areas with high point density. A fast and simple algorithm based on scan line analysis is proposed for automatic detection of building points from LiDAR data. At first, ground/non-ground classification is performed to filter out the ground points. Douglas-Peucker algorithm is then used to segment the scan line into segment objects based on height variation. These objects are preliminarily classified into buildings and vegetation based on local analysis using simple rules. At last, the region growing method is used to improve the quality of the extraction. The test data provided by the ISPRS test project on urban object extraction, containing a lot of buildings with complex roof structures, various sizes, and different heights, is used to test the algorithm. The experimental results show that the proposed algorithm can extract building regions effectively.

  3. SIMPle Dark Matter: Self-Interactions and keV Lines

    CERN Document Server

    Boddy, Kimberly K; Kaplinghat, Manoj; Shadmi, Yael; Tait, Timothy M P

    2014-01-01

    We consider a simple supersymmetric hidden sector: pure SU(N) gauge theory. Dark matter is made up of hidden glueballinos with mass $m_X$ and hidden glueballs with mass near the confinement scale $\\Lambda$. For $m_X \\sim 1\\,\\text{TeV}$ and $\\Lambda \\sim 100\\,\\text{MeV}$, the glueballinos freeze out with the correct relic density and self-interact through glueball exchange to resolve small-scale structure puzzles. An immediate consequence is that the glueballino spectrum has a hyperfine splitting of order $\\Lambda^2 / m_X \\sim 10\\,\\text{keV}$. We show that the radiative decays of the excited state can explain the observed 3.5 keV X-ray line signal from clusters of galaxies, Andromeda, and the Milky Way.

  4. A simple method for controlling the line width of SASE X-ray FELs

    International Nuclear Information System (INIS)

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

    2010-04-01

    This paper describes a novel single-bunch self-seeding scheme for generating highly monochromatic X-rays from a baseline XFEL undulator. A self-seeded XFEL consists of two undulators with an X-ray monochromator located between them. Previous self-seeding schemes made use of a four-crystal fixed-exit monochromator in Bragg geometry. In such monochromator the X-ray pulse acquires a cm-long path delay, which must be compensated. For a single-bunch self-seeding scheme this requires a long electron beam bypass, implying modifications of the baseline undulator configuration. To avoid this problem, a double bunch self-seeding scheme based on a special photoinjector setup was recently proposed. At variance, here we propose a new time-domain method of monochromatization exploiting a single crystal in the transmission direction, thus avoiding the problem of extra-path delay for the X-ray pulse. The method can be realized using a temporal windowing technique, requiring a magnetic delay for the electron bunch only. When the incident X-ray beam satisfies the Bragg diffraction condition, multiple scattering takes place and the transmittance spectrum in the crystal exhibits an absorption resonance with a narrow linewidth. Then, the temporal waveform of the transmitted radiation pulse is characterized by a long monochromatic wake. The radiation power within this wake is much larger than the shot noise power. At the entrance of the second undulator, the monochromatic wake of the radiation pulse is combined with the delayed electron bunch, and amplified up to saturation level. The proposed setup is extremely simple and composed of as few as two simple elements. These are the crystal and the short magnetic chicane, which accomplishes three tasks by itself. It creates an offset for crystal installation, it removes the electron micro-bunching produced in the first undulator, and it acts as a delay line for temporal windowing. Using a single crystal installed within a short magnetic

  5. Simple obstacle detection to prevent miscalculation of line location and orientation in line following using statistically calculated expected values

    Science.gov (United States)

    Mundhenk, Terrell N.; Rivett, Michael J.; Hall, Ernest L.

    2000-10-01

    Visual line following in mobile robotics can be made more complex when objects are places on or around the line being followed. An algorithm is presented that suggests a manner in which a good line track can be discriminated from a bad line track using the expected size of the line. The mobile robot in this case can determine the size of the width of the line. It calculates a mean size for the line as it moves and maintains a set size of samples, which enable it to adapt to changing conditions. If a measurement is taken that falls outside of what is to be expected by the robot, then it treats the measurement as undependable and as such can take measures to deal with what it believes to be erroneous data. Techniques for dealing with erroneous data include attempting to look around the obstacle or making an educated guess as to where the line should be. The system discussed has the advantage of not needing to add any extra equipment to discover if an obstacle is corrupting its measurements. Instead, the robot is able to determine if data is good ro bad based upon what it expects to find.

  6. Exploiting a Simple Method for the Determination of Manganese in Polyethylene Lined Tubing for Petroleum and Natural Gas Industries

    Directory of Open Access Journals (Sweden)

    Shao Xiaodong

    2018-01-01

    Full Text Available The polyethylene lined tubing is the key to enabling the industry to meet some of the energy security challenges that nations face today. It is well known that manganese is an important element in polyethylene lined tubing. In this paper, a simple spectrophotometric method was described for the determination of manganese in polyethylene lined tubing. The method was based on the oxidation-reduction reaction between ammonium persulfate and manganese(II producing manganese(VII in the presence of silver nitrate as a catalyst. The characteristic wavelength of maximum absorption of manganese(VII was obtained locating at 530 nm. Under the optimum reaction conditions the absorption value was proportional to the concentration of manganese in the range of 0.2%~1.9% (R2 = 0.9997, and the relative standard deviation was less than 3.0% (n=5. The proposed method was applied successfully to determine manganese in polyethylene lined tubing real samples.

  7. Note: Simple means for selective removal of the 365 nm line from the Hg spectrum using Dy

    DEFF Research Database (Denmark)

    Vesborg, Peter Christian Kjærgaard; Chorkendorff, Ib; Brock-Nannestad, T.

    2011-01-01

    The emission spectrum of mercury has a notable line at about 365 nm under both low and medium-high pressure conditions. A simple filter based on a solution of dysprosium ions, Dy3+, is shown to be very useful for applications of Hg-light sources where this line is unwanted. The presented filter...... is cheap, robust, and stable towards degradation or bleaching - even under intense irradiation. The absorption spectrum for the Dy-filter is presented along with emission spectra from both low-pressure and high-pressure Hg-lamps to illustrate the utility of the technique under best-case and worst...

  8. Overhead Transmission Line Sag Estimation Using a Simple Optomechanical System with Chirped Fiber Bragg Gratings. Part 1: Preliminary Measurements.

    Science.gov (United States)

    Wydra, Michal; Kisala, Piotr; Harasim, Damian; Kacejko, Piotr

    2018-01-20

    A method of measuring the power line wire sag using optical sensors that are insensitive to high electromagnetic fields was proposed. The advantage of this technique is that it is a non-invasive measurement of power line wire elongation using a unique optomechanical system. The proposed method replaces the sag of the power line wire with an extension of the control sample and then an expansion of the attached chirped fiber Bragg grating. This paper presents the results of the first measurements made on real aluminum-conducting steel-reinforced wire, frequently used for power line construction. It has been shown that the proper selection of the CFBG (chirped fiber Bragg grating) transducer and the appropriate choice of optical parameters of such a sensor will allow for high sensitivity of the line wire elongation and sag while reducing the sensitivity to the temperature. It has been shown that with a simple optomechanical system, a non-invasive measurement of the power line wire sag that is insensitive to temperature changes and the influence of high electromagnetic fields can be achieved.

  9. Simple Correctors for Elimination of High-Order Modes in Corrugated Waveguide Transmission Lines.

    Science.gov (United States)

    Kowalski, Elizabeth J; Shapiro, Michael A; Temkin, Richard J

    2014-01-01

    When using overmoded corrugated waveguide transmission lines for high power applications, it is necessary to control the mode content of the system. Ideally, overmoded corrugated transmission lines operate in the fundamental HE 11 mode and provide low losses for long distances. Unwanted higher order modes (HOMs), particularly LP 11 and HE 12 , are often excited in the experimental systems due to practical misalignments in the transmission line system. This paper discusses how the unwanted modes propagate along with the fundamental mode in the transmission line system by formulating an equation that relates the center of power offset and angle of propagation of a beam (for the HE 11 and LP 11 modes) or the waist size and phase front radius of curvature of a beam (for the HE 11 and HE 12 modes). By introducing two miter bend correctors into the transmission system-miter bends that have slightly angled or ellipsoidal mirrors-the HOMs can be precisely manipulated in the system. This technique can be used to eliminate small quantities of unwanted modes, thereby creating a nearly pure fundamental mode beam with minimal losses. Examples of these applications are calculated and show the theoretical conversion of up to 10% HOM content into the fundamental HE 11 mode with minimal losses.

  10. Mining the O-glycoproteome using zinc-finger nuclease-glycoengineered SimpleCell lines

    DEFF Research Database (Denmark)

    Steentoft, Catharina; Vakhrushev, Sergey Y; Vester-Christensen, Malene B

    2011-01-01

    -glycopeptides from total cell lysates using lectin chromatography and nanoflow liquid chromatography-mass spectrometry (nLC-MS/MS) with electron transfer dissociation fragmentation. We identified >100 O-glycoproteins with >350 O-glycan sites (the great majority previously unidentified), including a GalNAc O......-glycan linkage to a tyrosine residue. The SimpleCell method should facilitate analyses of important functions of protein glycosylation. The strategy is also applicable to other O-glycoproteomes....

  11. On-line learning through simple perceptron learning with a margin.

    Science.gov (United States)

    Hara, Kazuyuki; Okada, Masato

    2004-03-01

    We analyze a learning method that uses a margin kappa a la Gardner for simple perceptron learning. This method corresponds to the perceptron learning when kappa = 0 and to the Hebbian learning when kappa = infinity. Nevertheless, we found that the generalization ability of the method was superior to that of the perceptron and the Hebbian methods at an early stage of learning. We analyzed the asymptotic property of the learning curve of this method through computer simulation and found that it was the same as for perceptron learning. We also investigated an adaptive margin control method.

  12. The bra-line back lift: a simple approach to correcting severe back rolls.

    Science.gov (United States)

    Hunstad, Joseph P; Khan, Phillip D

    2014-10-01

    Anatomic sequelae of the upper back that occur with age or weight loss have been somewhat underserved in the plastic surgery literature. Zones of adherence in the upper posterior trunk create overhanging folds of skin and subcutaneous tissue, which are disturbing to the patient both functionally and cosmetically. These adherence points prove challenging in that they prevent contouring of the upper back with procedures such as traditional abdominoplasty or lower body lift. The bra line back lift provides a reliable and consistent method of addressing these issues by eliminating excess redundant skin and adiposity from the region. Copyright © 2014 Elsevier Inc. All rights reserved.

  13. Chlorophyll and carotenoid binding in a simple red algal light-harvesting complex crosses phylogenetic lines.

    Science.gov (United States)

    Grabowski, B; Cunningham, F X; Gantt, E

    2001-02-27

    The membrane proteins of peripheral light-harvesting complexes (LHCs) bind chlorophylls and carotenoids and transfer energy to the reaction centers for photosynthesis. LHCs of chlorophytes, chromophytes, dinophytes, and rhodophytes are similar in that they have three transmembrane regions and several highly conserved Chl-binding residues. All LHCs bind Chl a, but in specific taxa certain characteristic pigments accompany Chl a: Chl b and lutein in chlorophytes, Chl c and fucoxanthin in chromophytes, Chl c and peridinin in dinophytes, and zeaxanthin in rhodophytes. The specificity of pigment binding was examined by in vitro reconstitution of various pigments with a simple light-harvesting protein (LHCaR1), from a red alga (Porphyridium cruentum), that normally has eight Chl a and four zeaxanthin molecules. The pigments typical of a chlorophyte (Spinacea oleracea), a chromophyte (Thallasiosira fluviatilis), and a dinophyte (Prorocentrum micans) were found to functionally bind to this protein as evidenced by their participation in energy transfer to Chl a, the terminal pigment. This is a demonstration of a functional relatedness of rhodophyte and higher plant LHCs. The results suggest that eight Chl-binding sites per polypeptide are an ancestral trait, and that the flexibility to bind various Chl and carotenoid pigments may have been retained throughout the evolution of LHCs.

  14. Simple model for post seismic ionospheric disturbances above an earthquake epicentre and along connecting magnetic field lines

    Directory of Open Access Journals (Sweden)

    R. Marchand

    2008-12-01

    Full Text Available The detection of ionospheric disturbances associated with seismic activity is one of the main objectives of the DEMETER micro-satellite. Its scientific payload provides a comprehensive set of electron and ion measurements. The present work describes a simple model of post-seismic disturbances in the ionosphere above the epicentre. Following a major seism, the neutral atmosphere is assumed to be subject to an acoustic pulse propagating upward, to high altitudes. By coupling this perturbation to the two-dimensional ionospheric model SAMI2 it is then possible to calculate the variations in a number of plasma parameters in the plume region and along connecting magnetic field lines, for an event of representative magnitude. The feasibility of identifying the signature of seismic events from satellite observations is then assessed in view of representative DEMETER measurements and of their natural variability.

  15. Structure-cytotoxicity relationships of a series of natural and semi-synthetic simple coumarins as assessed in two human tumour cell lines

    NARCIS (Netherlands)

    Kolodziej, H; Kayser, O; Woerdenbag, HJ; vanUden, W; Pras, N

    1997-01-01

    The cytotoxicity of 22 natural and semi-synthetic simple coumarins was evaluated in GLC(4), a human small cell lung carcinoma cell line, and in COLO 320, a human colorectal cancer cell line, using the microculture tetrazolium (MTT) assay. With IC50 values > 100 mu M, following a continuous (96h)

  16. Design and implementation of a simple on-line time-activity curve detector for [O-15] water PET studies

    International Nuclear Information System (INIS)

    Wollenweber, S.D.; Hichwa, R.D.; Ponto, L.L.B.

    1996-01-01

    A simple, automated on-line detector system has been fabricated and implemented to detect the arterial time-activity curve (TAC) for water PET studies. This system offers two significant improvements over existing systems: a pump mechanism is not required to control arterial blood flow through the detector and dispersion correction of the time-activity curve is unnecessary. The positrons emanating from a thin-walled, 0.134 cm inner-diameter plastic tube are detected by a 0.5 cm wide by 1.0 cm long by 0.1 cm thick plastic scintillator mounted to a miniature PMT. Photon background is shielded by a 2.0 cm thick cylindrical lead shield. Mean cerebral blood flow (mCBF) calculated from the TAC determined by 1-second automated sampling was compared to that calculated from every 5-second integrated manual samples. Improvements in timing resolution (1-sec vs. 5-sec) cause small but significant differences between the two sampling methods. Dispersion is minimized due to small tubing diameters, short lengths of tubing between the radial arterial sampling site and the detector and the presence of a 3-way valve 10 cm proximal to the detector

  17. A simple efficient method of delay-line termination and timing-signals extraction in position-sensitive proportional counters

    International Nuclear Information System (INIS)

    Birk, M.; Breskin, A.; Trautner, N.

    1976-01-01

    Pulse transformers are used to match the readout delay line (Z 0 approximately 1.5 kΩ) in a position-sensitive proportional counter to 50-ohm cables, which are terminated by the input impedances of remotely located ground-gate FET aplifiers. Good terminations and high slope-to-noise ratios were achieved. (author)

  18. Determination of Genetic Diversity Using 15 Simple Sequence Repeats Markers in Long Term Selected Japanese Quail Lines.

    Science.gov (United States)

    Karabağ, Kemal; Balcıoğlu, Murat Soner; Karlı, Taki; Alkan, Sezai

    2016-12-01

    Japanese quail is still used as a model for poultry research because of their usefulness as laying, meat, and laboratory animals. Microsatellite markers are the most widely used molecular markers, due to their relative ease of scoring and high levels of polymorphism. The objective of the research was to determine genetic diversity and population genetic structures of selected Japanese quail lines (high body weight 1 [HBW1], HBW2, low body weight [LBW], and layer [L]) throughout 15th generations and an unselected control (C). A total of 69 individuals from five quail lines were genotyped by fifteen microsatellite markers. When analyzed profiles of the markers the observed (H o ) and expected (H e ) heterozygosity ranged from 0.04 (GUJ0027) to 0.64 (GUJ0087) and 0.21 (GUJ0027) to 0.84 (GUJ0037), respectively. Also, H o and H e were separated from 0.30 (L and LBW) to 0.33 (C and HBW2) and from 0.52 (HBW2) to 0.58 (L and LBW), respectively. The mean polymorphic information content (PIC) ranged from 0.46 (HBW2) to 0.52 (L). Approximately half of the markers were informative (PIC≥0.50). Genetic distances were calculated from 0.09 (HBW1 and HBW2) to 0.33 (C and L). Phylogenetic dendrogram showed that the quail lines were clearly defined by the microsatellite markers used here. Bayesian model-based clustering supported the results from the phylogenetic tree. These results reflect that the set of studied markers can be used effectively to capture the magnitude of genetic variability in selected Japanese quail lines. Also, to identify markers and alleles which are specific to the divergence lines, further generations of selection are required.

  19. LINES

    Directory of Open Access Journals (Sweden)

    Minas Bakalchev

    2015-10-01

    Full Text Available The perception of elements in a system often creates their interdependence, interconditionality, and suppression. The lines from a basic geometrical element have become the model of a reductive world based on isolation according to certain criteria such as function, structure, and social organization. Their traces are experienced in the contemporary world as fragments or ruins of a system of domination of an assumed hierarchical unity. How can one release oneself from such dependence or determinism? How can the lines become less “systematic” and forms more autonomous, and less reductive? How is a form released from modernistic determinism on the new controversial ground? How can these elements or forms of representation become forms of action in the present complex world? In this paper, the meaning of lines through the ideas of Le Corbusier, Leonidov, Picasso, and Hitchcock is presented. Spatial research was made through a series of examples arising from the projects of the architectural studio “Residential Transformations”, which was a backbone for mapping the possibilities ranging from playfulness to exactness, as tactics of transformation in the different contexts of the contemporary world.

  20. Stent therapy for malignant superior vena cava syndrome: Should be first line therapy or simple adjunct to radiotherapy

    International Nuclear Information System (INIS)

    Chatziioannou, A.; Alexopoulos, Th.; Mourikis, D.; Dardoufas, K.; Katsenis, K.; Lazarou, S.; Koutoulidis, V.; Ladopoulos, Ch.; Vlachos, L.

    2003-01-01

    The goal of this paper is to present our experience with superior vena cava (SVC) stenting, as first line procedure for immediate relief, in patients with malignancy, and its potential influence in the subsequent radiotherapy (XRT). Over a 1-year period, 18 patients with SVC syndrome due to severe stenosis secondary to mediastinal malignancy were referred for stent insertion. A SVC score was used to measure treatment effectiveness. Stent insertion had been successful in 18/18 patients (technical success 100%). All patients experienced symptomatic relief within few hours of the procedure. There were no major complications. In all patients we were able to start radiotherapy (XRT) the next day, after stenting according to our new institutional protocol. All patients were able to comply with the XRT program, perfectly well. Conclusions: SVC stenting provides immediate significant relief of the very annoying SVC syndrome symptoms, thus facilitating excellent compliance of all the patients to the subsequently XRT protocols. We strongly recommend SVC stenting as first line procedure, in patients with SVC syndrome due to malignancy prior to radiotherapy

  1. A simple and versatile system for fermentation control by on-line HPLC analysis of medium components

    Energy Technology Data Exchange (ETDEWEB)

    Koliander, W.; Arnezeder, C.; Hampel, W.A. (Technische Univ., Vienna (Austria). Inst. fuer Biochemische Technologie und Mikrobiologie)

    1990-01-01

    The configuration and applicability of a system for on-line determinations of media components by high performance liquid chromatography (HPLC) is described, assembled only from commercial available stand-alone devices. The fermentation broth is circulated in a bypass through a magnetically stirred filtration unit. The clear filtrate is injected at preset intervals by an electrically actuated valve into the HPLC analysis system. Excess is circulated back to the fermenter to minimize liquid loss. The system offers aseptic operation, an excellent long-term stability and a relatively short response time. A wide range of media components is detectable by appropriate choice of analytical HPLC columns and detectors. The system was tested for the analysis of carbohydrates in cultivations of Saccharomyces cerevisiae, Streptomyces olivaceus and Arthrobacter sp. (orig.).

  2. Simple Machines Made Simple.

    Science.gov (United States)

    St. Andre, Ralph E.

    Simple machines have become a lost point of study in elementary schools as teachers continue to have more material to cover. This manual provides hands-on, cooperative learning activities for grades three through eight concerning the six simple machines: wheel and axle, inclined plane, screw, pulley, wedge, and lever. Most activities can be…

  3. Potencial de híbridos simples de milho para extração de linhagens Potential of maize single hybrids to generate inbred lines

    Directory of Open Access Journals (Sweden)

    Odair Bison

    2003-04-01

    Full Text Available A utilização de híbridos simples comerciais de milho é uma das opções de populações para a extração de linhagens, porque são adaptados e provavelmente concentram alta freqüência de alelos favoráveis já fixados. Mesmo nos locos que estão segregando, a freqüência de alelos favoráveis é 0,5. Assim, a identificação de populações promissoras, derivadas de híbridos simples superiores, é uma boa estratégia para aumentar a eficiência dos programas de melhoramento. As populações derivadas dos híbridos simples comerciais AG9012 e C333 foram avaliadas com o objetivo de verificar o potencial dessas para extração de linhagens superiores, por meio das estimativas de parâmetros genéticos e fenotípicos, da estimativa de m+a e a metodologia proposta por Jinks & Pooni (1976. Foram avaliadas 169 famílias S1 de cada população, durante a safra agrícola de 1999/2000, na área experimental do Departamento de Biologia da UFLA, em Lavras - MG, em látice simples 13x13, sendo as parcelas constituídas por uma linha de 3 m. As características analisadas foram incidência de Phaeosphaeria maydis em duas épocas, altura de plantas, altura de espigas e produtividade de espigas despalhadas. Foi constatado que há possibilidade de se obterem linhagens com bom desempenho per se, sendo a população derivada do C333 a mais promissora, por associar resistência a Phaeosphaeria maydis e possuir média mais alta e maior probabilidade de obtenção de linhagens superiores. A metodologia proposta por Jinks & Pooni (1976 mostrou-se mais informativa do que a estimativa de m+a para a escolha de populações, mas, quando possível, as duas podem ser utilizadas simultaneamente para auxiliar na decisão dos melhoristas.Populations derived from commercial single hybrids are one of the breeder options for inbred line extraction because of their adaptation and probable high frequency of loci with fixed favorable alleles. Even the segregating loci carry

  4. A simple groundwater scheme in the TRIP river routing model: global off-line evaluation against GRACE terrestrial water storage estimates and observed river discharges

    Directory of Open Access Journals (Sweden)

    J.-P. Vergnes

    2012-10-01

    Full Text Available Groundwater is a non-negligible component of the global hydrological cycle, and its interaction with overlying unsaturated zones can influence water and energy fluxes between the land surface and the atmosphere. Despite its importance, groundwater is not yet represented in most climate models. In this paper, the simple groundwater scheme implemented in the Total Runoff Integrating Pathways (TRIP river routing model is applied in off-line mode at global scale using a 0.5° model resolution. The simulated river discharges are evaluated against a large dataset of about 3500 gauging stations compiled from the Global Data Runoff Center (GRDC and other sources, while the terrestrial water storage (TWS variations derived from the Gravity Recovery and Climate Experiment (GRACE satellite mission help to evaluate the simulated TWS. The forcing fields (surface runoff and deep drainage come from an independent simulation of the Interactions between Soil-Biosphere-Atmosphere (ISBA land surface model covering the period from 1950 to 2008. Results show that groundwater improves the efficiency scores for about 70% of the gauging stations and deteriorates them for 15%. The simulated TWS are also in better agreement with the GRACE estimates. These results are mainly explained by the lag introduced by the low-frequency variations of groundwater, which tend to shift and smooth the simulated river discharges and TWS. A sensitivity study on the global precipitation forcing used in ISBA to produce the forcing fields is also proposed. It shows that the groundwater scheme is not influenced by the uncertainties in precipitation data.

  5. IDEN2-A program for visual identification of spectral lines and energy levels in optical spectra of atoms and simple molecules

    Science.gov (United States)

    Azarov, V. I.; Kramida, A.; Vokhmentsev, M. Ya.

    2018-04-01

    The article describes a Java program that can be used in a user-friendly way to visually identify spectral lines observed in complex spectra with theoretically predicted transitions between atomic or molecular energy levels. The program arranges various information about spectral lines and energy levels in such a way that line identification and determination of positions of experimentally observed energy levels become much easier tasks that can be solved fast and efficiently.

  6. Opening of through-wall cracks in BWR coolant lines due to the application of severe overloads II: a simple approach

    International Nuclear Information System (INIS)

    Smith, E.

    1984-01-01

    A simple theoretical analysis gives an estimate of the opening area associated with a through-wall crack in a pipe when this is subject to an imposed rotation at its ends. The crack-opening area is expressed in terms of the crack size, and the plastic rotation at the cracked cross-section, where plastic deformation is assumed to be confined. The results are relevant to the integrity of boiling water reactor coolant systems during accident conditions

  7. Simple machines

    CERN Document Server

    Graybill, George

    2007-01-01

    Just how simple are simple machines? With our ready-to-use resource, they are simple to teach and easy to learn! Chocked full of information and activities, we begin with a look at force, motion and work, and examples of simple machines in daily life are given. With this background, we move on to different kinds of simple machines including: Levers, Inclined Planes, Wedges, Screws, Pulleys, and Wheels and Axles. An exploration of some compound machines follows, such as the can opener. Our resource is a real time-saver as all the reading passages, student activities are provided. Presented in s

  8. A Study on EMTP-Analysis Model for Switch-Board SPD with Gap and Propagation Characteristics of Lightning Surge on Simple Indoor Distribution Line

    Science.gov (United States)

    Sakamoto, Yoshiki; Miyazaki, Teru; Okabe, Shigemitsu

    The numbers of damages of home electric appliances due to lightning surges have recently increased. Installing Surge Protective Devices (SPDs) for indoor distribution line is one of countermeasures against the damages, and is also spreading after an amendment of the regulation on indoor wires in 2005. Past studies have showed that the SPDs installed on the switchboard are effective for protecting all the equipment supplied by indoor distribution lines against lightning strokes. However, it is difficult to evaluate the protective effects of the SPDs against lightning strikes when considering complex indoor wires in houses. Thus, a high-precision analysis method is required to clarify the lightning performance of the SPDs for interior wiring. In this research, experiments were conducted to grasp the protective effects of the SPDs installed on a switchboard against lightning surges invading into a house, and an analysis model by the EMTP was proposed. The calculated results relatively agreed with the experimental results.

  9. Revisiting Weak Emission-line Quasars with a Simple Approach to Deduce their Nature and the Tracers of X-ray Weakness

    Science.gov (United States)

    Ni, Qingling

    2018-01-01

    We present an X-ray and multi-wavelength study of 17 “bridge” weak emission-line quasars (WLQs) and 16 “extreme” WLQs naturally divided by their C IV rest equivalent widths (REWs), which constitute our clean WLQ sample together. New Chandra 3.1-4.8 ks observations were obtained for 14 objects while the other 19 have archival X-ray observations. 4 of the 17 bridge WLQs appear to be X-ray weak, while 9 of the 16 extreme WLQs appear to be X-ray weak. The X-ray weak fraction in the bridge sample (23.5%) is lower than in the extreme sample(56.3%), indicating the fraction of X-ray weak objects along with rising C IV REWs.X-ray stacking analysis is performed for the X-ray weak WLQs in the clean sample. We measured a relatively hard (Γeff=1.37) effective power-law photon index for a stack of the X-ray weak subsample, suggesting X-ray absorption due to shielding material inside the broad emission-line region (BELR). We proposed a geometrically and optically thick inner accretion disk as the natural shield, which could also explain the behavior of the X-ray weak fraction along with C IV REW.Futhermore, we ran Peto-Prentice tests to assess if the distributions of optical-UV spectral properties are different between X-ray weak WLQs and X-ray normal WLQs. We also examined correlations between △αOX and optical-UV spectral properties. The C IV REW, C IV blueshift, C IV FWHM, REWs of the Si IV, λ1900, Fe II, and Mg II emission features, and the relative SDSS color △(g - i) are examined in our study. △(g - i) turned out to be the most effective tracer of X-ray weakness.

  10. Molecularly imprinted polymer cartridges coupled on-line with high performance liquid chromatography for simple and rapid analysis of dextromethorphan in human plasma samples.

    Science.gov (United States)

    Moein, Mohammad Mahdi; Javanbakht, Mehran; Akbari-Adergani, Behrouz

    2011-04-01

    In this paper, a novel method is described for automated determination of dextromethorphan in biological fluids using molecularly imprinted solid-phase extraction (MISPE) as a sample clean-up technique combined with high performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and dextromethorphan as template molecule. These imprinted polymers were used as solid-phase extraction sorbent for the extraction of dextromethorphan from human plasma samples. Various parameters affecting the extraction efficiency of the MIP cartridges were evaluated. The high selectivity of the sorbent coupled to the high performance liquid chromatographic system permitted a simple and rapid analysis of this drug in plasma samples with limits of detection (LOD) and quantification (LOQ) of 0.12 ng/mL and 0.35 ng/mL, respectively. The MIP selectivity was evaluated by analyzing of the dextromethorphan in presence of several substances with similar molecular structures and properties. Results from the HPLC analyses showed that the recoveries of dextromethorphan using MIP cartridges from human plasma samples in the range of 1-50 ng/mL were higher than 87%. Copyright © 2011 Elsevier B.V. All rights reserved.

  11. Simple prostatectomy

    Science.gov (United States)

    ... Han M, Partin AW. Simple prostatectomy: open and robot-assisted laparoscopic approaches. In: Wein AJ, Kavoussi LR, ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

  12. Simple unification

    International Nuclear Information System (INIS)

    Ponce, W.A.; Zepeda, A.

    1987-08-01

    We present the results obtained from our systematic search of a simple Lie group that unifies weak and electromagnetic interactions in a single truly unified theory. We work with fractionally charged quarks, and allow for particles and antiparticles to belong to the same irreducible representation. We found that models based on SU(6), SU(7), SU(8) and SU(10) are viable candidates for simple unification. (author). 23 refs

  13. Simple Interactions

    DEFF Research Database (Denmark)

    and international public. The exhibition Simple Interactions. Sound Art from Japan presents works by 9 Japanese artists at the Museum of Contemporary Art Roskilde. The exhibition mixes installations, performances and documentations, all of which examine how simple interactions can create complex systems...... and patterns. Works and performances by the following artists are presented: Yuji DOGANE - Yukio FUJIMOTO - Atsuhiro ITO - Soichiro MIHARA - Atsushi NISHIJIMA - Jio SHIMIZU - Toshiya TSUNODA - Tetsuya UMEDA - Miki YUI The book presents texts by Minoru HATANAKa; Takashi KOJIMA, Rune SØCHTING and the editors...

  14. The molecular chemistry of diffuse and translucent clouds in the line-of-sight to Sgr B2: Absorption by simple organic and inorganic molecules in the GBT PRIMOS survey

    Science.gov (United States)

    Corby, J. F.; McGuire, B. A.; Herbst, E.; Remijan, A. J.

    2018-02-01

    The 1-50 GHz PRebiotic Interstellar MOlecular Survey (PRIMOS) contains 50 molecular absorption lines observed in clouds located in the line-of-sight to Sgr B2(N). The line-of-sight material is associated with diffuse and translucent clouds located in the Galactic center, bar, and spiral arms in the disk. We measured the column densities and estimate abundances, relative to H2, of 11 molecules and additional isotopologues observed in this material. We used absorption by optically thin transitions of c-C3H2 to estimate the molecular hydrogen columns, and argue that this method is preferable to more commonly used methods. We discuss the kinematic structure and abundance patterns of small molecules including the sulfur-bearing species CS, SO, CCS, H2CS, and HCS+; oxygen-bearing molecules OH, SiO, and H2CO; and simple hydrocarbon molecules c-C3H2, l-C3H, and l-C3H+. Finally, we discuss the implications of the observed chemistry for the structure of the gas and dust in the ISM. Highlighted results include the following. First, whereas gas in the disk has a molecular hydrogen fraction of 0.65, clouds on the outer edge of the Galactic bar and in or near the Galactic center have molecular fractions of 0.85 and >0.9, respectively. Second, we observe trends in isotope ratios with Galactocentric distance; while carbon and silicon show enhancement of the rare isotopes at low Galactocentric distances, sulfur exhibits no trend with Galactocentric distance. We also determine that the ratio of c-C3H2/c-H13CCCH provides a good estimate of the 12C/13C ratio, whereas H2CO/H213CO exhibits fractionation. Third, we report the presence of l-C3H+ in diffuse clouds for the first time. Finally, we suggest that CS has an enhanced abundance within higher density clumps of material in the disk, and therefore may be diagnostic of cloud conditions. If this holds, the diffuse clouds in the Galactic disk contain multiple embedded hyperdensities in a clumpy structure, and the density profile is not

  15. High Line

    DEFF Research Database (Denmark)

    Kiib, Hans

    2015-01-01

    . The High Line project has been carried out as part of an open conversion strategy. The result is a remarkable urban architectural project, which works as a catalyst for the urban development of Western Manhattan. The greater project includes the restoration and reuse of many old industrial buildings......At just over 10 meters above street level, the High Line extends three kilometers through three districts of Southwestern Manhattan in New York. It consists of simple steel construction, and previously served as an elevated rail line connection between Penn Station on 34th Street and the many...... in close proximity to the park bridge and new projects being added to fit the context. The outcome is a conglomeration of non-contemporary urban activities along the High Line, where mechanical workshops, small wholesale stores. etc. mix with new exclusive residential buildings, eminent cafés...

  16. SLIC superpixels for object delineation UAV data

    NARCIS (Netherlands)

    Crommelinck, Sophie Charlotte; Bennett, R.M.; Gerke, Markus; Koeva, M.N.; Yang, M.Y.; Vosselman, G.; Stachniss, C.; Förstner, W.; Schneider, J.

    2017-01-01

    Unmanned aerial vehicles (UAV) are increasingly investigated with regard to their potential to create and update (cadastral) maps. UAVs provide a flexible and low-cost platform for high-resolution data, from which object outlines can be accurately delineated. This delineation could be automated with

  17. Simple and quick determination of analgesics and other contaminants of emerging concern in environmental waters by on-line solid phase extraction coupled to liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Ferrer-Aguirre, Alejandra; Romero-González, Roberto; Vidal, J L Martínez; Frenich, Antonia Garrido

    2016-05-13

    A simple and quick analytical method has been developed for the determination of pharmaceutical compounds in water. An on-line solid-phase extraction (SPE) coupled to liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been optimized to determine 7 contaminants of emerging concern in environmental waters at ngL(-1) levels. This procedure requires minimal sample handling and small sample volume (900μL) with a total running time of 18min. Several SPE parameters were evaluated and optimized in order to achieve a high sample throughput. Therefore sample volume, carryover and reusability of the cartridges were evaluated. Performance characteristics were evaluated and good linearity was obtained (R(2)>0.98). Recoveries were evaluated in spiked samples at three concentrations and the values ranged from 71 to 104%. Intra and inter-day precision was lower than 10 and 13% respectively. Limits of quantification were equal to or lower than 10ngL(-1), except for 1,7-dimethylxanthine (20ngL(-1)) and ibuprofen (50ngL(-1)). The method was applied to 20 environmental water samples, and ibuprofen was the compound most widely detected at concentrations up to 42.06μgL(-1), whereas the other compounds were detected in fewer samples at lower concentrations (up to 15.99μgL(-1)). Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Applied mathematics made simple

    CERN Document Server

    Murphy, Patrick

    1982-01-01

    Applied Mathematics: Made Simple provides an elementary study of the three main branches of classical applied mathematics: statics, hydrostatics, and dynamics. The book begins with discussion of the concepts of mechanics, parallel forces and rigid bodies, kinematics, motion with uniform acceleration in a straight line, and Newton's law of motion. Separate chapters cover vector algebra and coplanar motion, relative motion, projectiles, friction, and rigid bodies in equilibrium under the action of coplanar forces. The final chapters deal with machines and hydrostatics. The standard and conte

  19. Rapid and simple one-step membrane extraction for the determination of 8-hydroxy-2'-deoxyguanosine in human plasma by a combination of on-line solid phase extraction and LC-MS/MS.

    Science.gov (United States)

    Wang, Chien-Jen; Yang, Ning-Hsiang; Chang, Chia-Chi; Liou, Saou-Hsing; Lee, Hui-Ling

    2011-11-15

    A quantitative analytical method using automated on-line solid phase extraction (SPE) and liquid chromatography-electrospray tandem mass spectrometry (LC-ESI-MS/MS) for the determination of 8-OHdG (8-hydroxy-2'-deoxyguanosine) in human plasma was developed and validated. A one-step membrane extraction method for the plasma sample preparation and a C18 SPE column with simple extraction and purification were used for the on-line extraction. A C18 column was employed for LC separation and ESI-MS/MS was utilized for detection. (15)N(5)-8-OHdG ((15)N(5)-8-hydroxy-2'-deoxyguanosine) was used as an internal standard for quantitative determination. The extraction, clean-up and analysis procedures were controlled by a fully automated six-port switch valve as one strategy to reduce the matrix effect and simultaneously improve detection sensitivity. Identification and quantification were based on the following transitions: m/z 284→168 for 8-OHdG and m/z 289→173 for (15)N(5)-8-OHdG. Satisfactory recovery was obtained, and the recovery ranged from 95.1 to 106.1% at trace levels in human plasma and urine, with a CV lower than 5.4%. Values for intraday and interday precision were between 2.3 and 6.8% for plasma and between 2.7 and 4.5% for urine, respectively. Values for the method accuracy of intraday and interday assays ranged from 93.0 and 100.5% for plasma and 110.2 and 119.4% for urine, respectively. The limits of detection (LOD) and LOQ were 0.008 ng/mL and 0.02 ng/mL, respectively.The applicability of this newly developed method was demonstrated by analysis of human plasma samples for an evaluation of the future risk of oxidative stress status in human exposure to nanoparticles and other diseases. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

  20. Fast and simple screening for the simultaneous analysis of seven metabolites derived from five volatile organic compounds in human urine using on-line solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Chiang, Wen-Chieh; Chen, Chao-Yu; Lee, Ting-Chen; Lee, Hui-Ling; Lin, Yu-Wen

    2015-01-01

    Recently, the International Agency for Research on cancer classified outdoor air pollution and particulate matter from outdoor air pollution as carcinogenic to humans (IARC Group 1), based on sufficient evidence of carcinogenicity in humans and experimental animals and strong mechanistic evidence. In particular, a wide variety of volatile organic compounds (VOCs) are volatized or released into the atmosphere and can become ubiquitous, as they originate from many different natural and anthropogenic sources, such as paints, pesticides, vehicle exhausts, cooking fumes, and tobacco smoke. Humans may be exposed to VOCs through inhalation, ingestion, or dermal contact, which may increase the risk of leukemia, birth defects, neurocognitive impairment, and cancer. Therefore, the focus of this study was the development of a simple, effective and rapid sample preparation method for the simultaneous determination of seven metabolites (6 mercaptic acids+t,t-muconic acid) derived from five VOCs (acrylamide, 1,3-butadiene, acrylonitrile, benzene, and xylene) in human urine by using automated on-line solid-phase extraction (SPE) coupled with liquid chromatography-electrospray tandem mass spectrometry (LC-MS/MS). An aliquot of each diluted urinary sample was directly injected into an autosampler through a trap column to reduce contamination, and then the retained target compounds were eluted by back-flush mode into an analytical column for separation. Negative electrospray ionization tandem mass spectrometry was utilized for quantification. The coefficients of correlation (r(2)) for the calibration curves were greater than 0.995. Reproducibility was assessed by the precision and accuracy of intra-day and inter-day precision, which showed results for coefficient of variation (CV) that were low 0.9 to 6.6% and 3.7 to 8.5%, respectively, and results for recovery that ranged from 90.8 to 108.9% and 92.1 to 107.7%, respectively. The limits of detection (LOD) and limits of

  1. Crossing simple resonances

    Energy Technology Data Exchange (ETDEWEB)

    Collins, T.

    1985-08-01

    A simple criterion governs the beam distortion and/or loss of protons on a fast resonance crossing. Results from numerical integrations are illustrated for simple sextupole, octupole, and 10-pole resonances.

  2. A simple and highly sensitive on-line column extraction liquid chromatography-tandem mass spectrometry method for the determination of protein-unbound tacrolimus in human plasma samples.

    Science.gov (United States)

    Bittersohl, Heike; Schniedewind, Björn; Christians, Uwe; Luppa, Peter B

    2018-04-27

    Therapeutic drug monitoring (TDM) of the immunosuppressive drug tacrolimus is essential to avoid side effects and rejection of the allograft after transplantation. In the blood circulation, tacrolimus is largely located inside erythrocytes or bound to plasma proteins and less than 0.1% is protein-unbound (free). One basic principle of clinical pharmacology is that only free drug is pharmacologically active and monitoring this portion has the potential to better reflect the drug effect than conventional measurements of total tacrolimus in whole blood. To address this, a highly sensitive and straightforward on-line liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed, validated and applied to patient plasma samples. The sample preparation included ultracentrifugation and addition of the stable isotope labeled drug analogue D2,13C-tacrolimus, followed by on-line sample extraction and measurement using a Sciex QTRAP ® 6500 in the multiple reaction monitoring mode. Due to very low concentrations of protein-unbound tacrolimus, it was important to develop a highly sensitive, precise and accurate assay. Here, we first report the efficient formation of tacrolimus lithium adduct ions, which greatly increased assay sensitivity. A lower limit of quantification (LLOQ) of 1 pg/mL (10 fg on column) was achieved and the assay was linear between 1 and 200 pg/mL. There was no carry-over detected. The inaccuracy ranged from -9.8 to 7.4% and the greatest imprecision was 7.5%. The matrix factor was found to be smaller than 1.1%. In summary, this method represents a suitable tool to investigate the potential clinical value of free tacrolimus monitoring in organ transplant recipients. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. A Simple "Tubeless" Telescope

    Science.gov (United States)

    Straulino, S.; Bonechi, L.

    2010-01-01

    Two lenses make it possible to create a simple telescope with quite large magnification. The set-up is very simple and can be reproduced in schools, provided the laboratory has a range of lenses with different focal lengths. In this article, the authors adopt the Keplerian configuration, which is composed of two converging lenses. This instrument,…

  4. Simple Machine Junk Cars

    Science.gov (United States)

    Herald, Christine

    2010-01-01

    During the month of May, the author's eighth-grade physical science students study the six simple machines through hands-on activities, reading assignments, videos, and notes. At the end of the month, they can easily identify the six types of simple machine: inclined plane, wheel and axle, pulley, screw, wedge, and lever. To conclude this unit,…

  5. Um dispositivo simples para a determinação simultânea e contínua da densidade de líquidos e da concentração de suspensões líquidas A simple device for on-line determinations of liquid density and suspension concentration

    Directory of Open Access Journals (Sweden)

    Sabrina S. Paes

    2004-06-01

    Full Text Available Um dispositivo para a determinação automática da densidade e da concentração de partículas em suspensões líquidas foi desenvolvido, usando suspensões de amido de mandioca como modelo. As determinações das propriedades foram baseadas na medição da força de empuxo que a suspensão líquida exerce sobre uma bóia de plástico esférica, submersa na mesma e conectada a um sistema eletrônico de medição de força. Os resultados obtidos mostraram que o dispositivo é um excelente densímetro e pode ser usado com sucesso para a determinação da concentração de suspensões líquidas de partículas, quando a relação entre concentração de sólidos e a densidade da suspensão é conhecida. Resultados da medida de densidade de líquidos com o dispositivo, como o glicerol com 99% de pureza e um óleo de soja comercial ficaram muito próximos dos valores citados na literatura e medidos por picnometria.A simple device was developed to determinate simultaneously the density and the concentration of particle suspensions. Cassava starch suspensions were used as a model to carry out the experiments and to develop the equipment. The determinations were based on the measure of the force suffered by a spherical plastic buoy immersed in the suspension under study. This force was transmitted to a force measure electronic cell by means of a metal stem. The experimental results showed that the device developed is a very good densimeter, which can be used to determine suspension concentration with good accuracy, when the relation between density and suspension concentration is known. Results of glycerin and a commercial soy oil density measures were in good agreement with the ones obtained in the literature and by picnometry technique, respectively.

  6. Cell line provenance.

    Science.gov (United States)

    Freshney, R Ian

    2002-07-01

    Cultured cell lines have become an extremely valuable resource, both in academic research and in industrial biotechnology. However, their value is frequently compromised by misidentification and undetected microbial contamination. As detailed elsewhere in this volume, the technology, both simple and sophisticated, is available to remedy the problems of misidentification and contamination, given the will to apply it. Combined with proper records of the origin and history of the cell line, assays for authentication and contamination contribute to the provenance of the cell line. Detailed records should start from the initiation or receipt of the cell line, and should incorporate data on the donor as well as the tissue from which the cell line was derived, should continue with details of maintenance, and include any accidental as well as deliberate deviations from normal maintenance. Records should also contain details of authentication and regular checks for contamination. With this information, preferably stored in a database, and suitable backed up, the provenance of the cell line so created makes the cell line a much more valuable resource, fit for validation in industrial applications and more likely to provide reproducible experimental results when disseminated for research in other laboratories.

  7. Strategy as simple rules.

    Science.gov (United States)

    Eisenhardt, K M; Sull, D N

    2001-01-01

    The success of Yahoo!, eBay, Enron, and other companies that have become adept at morphing to meet the demands of changing markets can't be explained using traditional thinking about competitive strategy. These companies have succeeded by pursuing constantly evolving strategies in market spaces that were considered unattractive according to traditional measures. In this article--the third in an HBR series by Kathleen Eisenhardt and Donald Sull on strategy in the new economy--the authors ask, what are the sources of competitive advantage in high-velocity markets? The secret, they say, is strategy as simple rules. The companies know that the greatest opportunities for competitive advantage lie in market confusion, but they recognize the need for a few crucial strategic processes and a few simple rules. In traditional strategy, advantage comes from exploiting resources or stable market positions. In strategy as simple rules, advantage comes from successfully seizing fleeting opportunities. Key strategic processes, such as product innovation, partnering, or spinout creation, place the company where the flow of opportunities is greatest. Simple rules then provide the guidelines within which managers can pursue such opportunities. Simple rules, which grow out of experience, fall into five broad categories: how- to rules, boundary conditions, priority rules, timing rules, and exit rules. Companies with simple-rules strategies must follow the rules religiously and avoid the temptation to change them too frequently. A consistent strategy helps managers sort through opportunities and gain short-term advantage by exploiting the attractive ones. In stable markets, managers rely on complicated strategies built on detailed predictions of the future. But when business is complicated, strategy should be simple.

  8. Percolation Line and Response Functions in Simple Supercritical Fluids

    Czech Academy of Sciences Publication Activity Database

    Škvor, J.; Nezbeda, Ivo

    2011-01-01

    Roč. 190, 1 Sp.I:Sl (2011), s. 133-139 ISSN 0026-8976. [Liblice Conference on the Statistical Mechanics of Liquids /8./. Brno, 13.06.2010-18.06.2010] Institutional research plan: CEZ:AV0Z40720504 Keywords : primitive models * clusters * voronoi polyhedra Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.819, year: 2011

  9. Simple Finite Sums

    KAUST Repository

    Alabdulmohsin, Ibrahim M.

    2018-03-07

    We will begin our treatment of summability calculus by analyzing what will be referred to, throughout this book, as simple finite sums. Even though the results of this chapter are particular cases of the more general results presented in later chapters, they are important to start with for a few reasons. First, this chapter serves as an excellent introduction to what summability calculus can markedly accomplish. Second, simple finite sums are encountered more often and, hence, they deserve special treatment. Third, the results presented in this chapter for simple finite sums will, themselves, be used as building blocks for deriving the most general results in subsequent chapters. Among others, we establish that fractional finite sums are well-defined mathematical objects and show how various identities related to the Euler constant as well as the Riemann zeta function can actually be derived in an elementary manner using fractional finite sums.

  10. Droids Made Simple

    CERN Document Server

    Mazo, Gary

    2011-01-01

    If you have a Droid series smartphone - Droid, Droid X, Droid 2, or Droid 2 Global - and are eager to get the most out of your device, Droids Made Simple is perfect for you. Authors Martin Trautschold, Gary Mazo and Marziah Karch guide you through all of the features, tips, and tricks using their proven combination of clear instructions and detailed visuals. With hundreds of annotated screenshots and step-by-step directions, Droids Made Simple will transform you into a Droid expert, improving your productivity, and most importantly, helping you take advantage of all of the cool features that c

  11. Excel 2010 Made Simple

    CERN Document Server

    Katz, Abbott

    2011-01-01

    Get the most out of Excel 2010 with Excel 2010 Made Simple - learn the key features, understand what's new, and utilize dozens of time-saving tips and tricks to get your job done. Over 500 screen visuals and clear-cut instructions guide you through the features of Excel 2010, from formulas and charts to navigating around a worksheet and understanding Visual Basic for Applications (VBA) and macros. Excel 2010 Made Simple takes a practical and highly effective approach to using Excel 2010, showing you the best way to complete your most common spreadsheet tasks. You'll learn how to input, format,

  12. Working with Simple Machines

    Science.gov (United States)

    Norbury, John W.

    2006-01-01

    A set of examples is provided that illustrate the use of work as applied to simple machines. The ramp, pulley, lever and hydraulic press are common experiences in the life of a student, and their theoretical analysis therefore makes the abstract concept of work more real. The mechanical advantage of each of these systems is also discussed so that…

  13. A Simple Hydrogen Electrode

    Science.gov (United States)

    Eggen, Per-Odd

    2009-01-01

    This article describes the construction of an inexpensive, robust, and simple hydrogen electrode, as well as the use of this electrode to measure "standard" potentials. In the experiment described here the students can measure the reduction potentials of metal-metal ion pairs directly, without using a secondary reference electrode. Measurements…

  14. Simple Driving Techniques

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    2002-01-01

    -like language. Our aim is to extract a simple notion of driving and show that even in this tamed form it has much of the power of more general notions of driving. Our driving technique may be used to simplify functional programs which use function composition and will often be able to remove intermediate data...

  15. Simple cryogenic infrared window

    NARCIS (Netherlands)

    Hartemink, M.; Hartemink, M.; Godfried, H.P; Godfried, Herman

    1991-01-01

    A simple, cheap technique is reported that allows materials with both large and small thermal expansion coefficients to be mounted as windows in low temperature cryostats while at the same time avoiding thermal stresses. The construction may be thermally cycled many times with no change in its

  16. Structure of simple liquids

    International Nuclear Information System (INIS)

    Blain, J.F.

    1969-01-01

    The results obtained by application to argon and sodium of the two important methods of studying the structure of liquids: scattering of X-rays and neutrons, are presented on one hand. On the other hand the principal models employed for reconstituting the structure of simple liquids are exposed: mathematical models, lattice models and their derived models, experimental models. (author) [fr

  17. Complexity is simple!

    Science.gov (United States)

    Cottrell, William; Montero, Miguel

    2018-02-01

    In this note we investigate the role of Lloyd's computational bound in holographic complexity. Our goal is to translate the assumptions behind Lloyd's proof into the bulk language. In particular, we discuss the distinction between orthogonalizing and `simple' gates and argue that these notions are useful for diagnosing holographic complexity. We show that large black holes constructed from series circuits necessarily employ simple gates, and thus do not satisfy Lloyd's assumptions. We also estimate the degree of parallel processing required in this case for elementary gates to orthogonalize. Finally, we show that for small black holes at fixed chemical potential, the orthogonalization condition is satisfied near the phase transition, supporting a possible argument for the Weak Gravity Conjecture first advocated in [1].

  18. Solid Lithium Ion Conductors (SLIC) for Lithium Solid State Batteries

    Data.gov (United States)

    National Aeronautics and Space Administration — To identify the most lithium-ion conducting solid electrolytes for lithium solid state batteries from the emerging types of solid electrolytes, based on a...

  19. Modern mathematics made simple

    CERN Document Server

    Murphy, Patrick

    1982-01-01

    Modern Mathematics: Made Simple presents topics in modern mathematics, from elementary mathematical logic and switching circuits to multibase arithmetic and finite systems. Sets and relations, vectors and matrices, tesselations, and linear programming are also discussed.Comprised of 12 chapters, this book begins with an introduction to sets and basic operations on sets, as well as solving problems with Venn diagrams. The discussion then turns to elementary mathematical logic, with emphasis on inductive and deductive reasoning; conjunctions and disjunctions; compound statements and conditional

  20. Working with simple machines

    OpenAIRE

    Norbury, John W.

    2006-01-01

    A set of examples is provided that illustrate the use of work as applied to simple machines. The ramp, pulley, lever and hydraulic press are common experiences in the life of a student and their theoretical analysis therefore makes the abstract concept of work more real. The mechanical advantage of each of these systems is also discussed so that students can evaluate their usefulness as machines.

  1. The simple complex numbers

    OpenAIRE

    Zalesny, Jaroslaw

    2008-01-01

    A new simple geometrical interpretation of complex numbers is presented. It differs from their usual interpretation as points in the complex plane. From the new point of view the complex numbers are rather operations on vectors than points. Moreover, in this approach the real, imaginary and complex numbers have similar interpretation. They are simply some operations on vectors. The presented interpretation is simpler, more natural, and better adjusted to possible applications in geometry and ...

  2. Information technology made simple

    CERN Document Server

    Carter, Roger

    1991-01-01

    Information Technology: Made Simple covers the full range of information technology topics, including more traditional subjects such as programming languages, data processing, and systems analysis. The book discusses information revolution, including topics about microchips, information processing operations, analog and digital systems, information processing system, and systems analysis. The text also describes computers, computer hardware, microprocessors, and microcomputers. The peripheral devices connected to the central processing unit; the main types of system software; application soft

  3. World lines.

    OpenAIRE

    Waser Jürgen; Fuchs Raphael; Ribicic Hrvoje; Schindler Benjamin; Blöschl Günther; Gröller Eduard

    2010-01-01

    In this paper we present World Lines as a novel interactive visualization that provides complete control over multiple heterogeneous simulation runs. In many application areas decisions can only be made by exploring alternative scenarios. The goal of the suggested approach is to support users in this decision making process. In this setting the data domain is extended to a set of alternative worlds where only one outcome will actually happen. World Lines integrate simulation visualization and...

  4. Theory of simple liquids

    CERN Document Server

    Hansen, Jean-Pierre

    1986-01-01

    This book gives a comprehensive and up-to-date treatment of the theory of ""simple"" liquids. The new second edition has been rearranged and considerably expanded to give a balanced account both of basic theory and of the advances of the past decade. It presents the main ideas of modern liquid state theory in a way that is both pedagogical and self-contained. The book should be accessible to graduate students and research workers, both experimentalists and theorists, who have a good background in elementary mechanics.Key Features* Compares theoretical deductions with experimental r

  5. ASP made simple

    CERN Document Server

    Deane, Sharon

    2003-01-01

    ASP Made Simple provides a brief introduction to ASP for the person who favours self teaching and/or does not have expensive computing facilities to learn on. The book will demonstrate how the principles of ASP can be learned with an ordinary PC running Personal Web Server, MS Access and a general text editor like Notepad.After working through the material readers should be able to:* Write ASP scripts that can display changing information on a web browser* Request records from a remote database or add records to it* Check user names & passwords and take this knowledge forward, either for their

  6. Beyond Simple Headquarters Configurations

    DEFF Research Database (Denmark)

    Dellestrand, Henrik; Kappen, Philip; Nell, Phillip Christopher

    -divisional importance and embeddedness effects are contingent on the overall complexity of the innovation project as signified by the size of the development network. The results lend support for the notion that parenting in complex structures entails complex headquarters structures and that we need to go beyond simple.......e., an innovation that is important for the firm beyond the divisional boundaries, drives dual headquarters involvement in innovation development. Contrary to expectations, on average, a non-significant effect of cross-divisional embeddedness on dual headquarters involvement is found. Yet, both cross...

  7. Dimensional analysis made simple

    International Nuclear Information System (INIS)

    Lira, Ignacio

    2013-01-01

    An inductive strategy is proposed for teaching dimensional analysis to second- or third-year students of physics, chemistry, or engineering. In this strategy, Buckingham's theorem is seen as a consequence and not as the starting point. In order to concentrate on the basics, the mathematics is kept as elementary as possible. Simple examples are suggested for classroom demonstrations of the power of the technique and others are put forward for homework or experimentation, but instructors are encouraged to produce examples of their own. (paper)

  8. Data processing made simple

    CERN Document Server

    Wooldridge, Susan

    2013-01-01

    Data Processing: Made Simple, Second Edition presents discussions of a number of trends and developments in the world of commercial data processing. The book covers the rapid growth of micro- and mini-computers for both home and office use; word processing and the 'automated office'; the advent of distributed data processing; and the continued growth of database-oriented systems. The text also discusses modern digital computers; fundamental computer concepts; information and data processing requirements of commercial organizations; and the historical perspective of the computer industry. The

  9. Simple and surgical exodontia.

    Science.gov (United States)

    DeBowes, Linda J

    2005-07-01

    Preemptive and postoperative pain management is part of patient care when performing extractions. Simple extractions can become complicated when tooth roots are fractured. Adequate lighting,magnification, and surgical techniques are important when per-forming surgical (complicated) extractions. Radiographs should be taken before extractions and also during the procedure to assist with difficult extractions. Adequate flap design and bone removal are necessary when performing surgical extractions. Complications, including ocular trauma, jaw fracture, and soft tissue trauma, are avoided or minimized with proper patient selection and technique.

  10. Probabilistic simple sticker systems

    Science.gov (United States)

    Selvarajoo, Mathuri; Heng, Fong Wan; Sarmin, Nor Haniza; Turaev, Sherzod

    2017-04-01

    A model for DNA computing using the recombination behavior of DNA molecules, known as a sticker system, was introduced by by L. Kari, G. Paun, G. Rozenberg, A. Salomaa, and S. Yu in the paper entitled DNA computing, sticker systems and universality from the journal of Acta Informatica vol. 35, pp. 401-420 in the year 1998. A sticker system uses the Watson-Crick complementary feature of DNA molecules: starting from the incomplete double stranded sequences, and iteratively using sticking operations until a complete double stranded sequence is obtained. It is known that sticker systems with finite sets of axioms and sticker rules generate only regular languages. Hence, different types of restrictions have been considered to increase the computational power of sticker systems. Recently, a variant of restricted sticker systems, called probabilistic sticker systems, has been introduced [4]. In this variant, the probabilities are initially associated with the axioms, and the probability of a generated string is computed by multiplying the probabilities of all occurrences of the initial strings in the computation of the string. Strings for the language are selected according to some probabilistic requirements. In this paper, we study fundamental properties of probabilistic simple sticker systems. We prove that the probabilistic enhancement increases the computational power of simple sticker systems.

  11. rf reference line for PEP

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, H.D.; Weaver, J.N.

    1979-03-01

    A rf phase reference line in 6 segments around the 2200 meter circumference PEP storage ring is described. Each segment of the reference line is phase stabilized by its own independent feedback system, which uses an amplitude modulated reflection from the end of each line. The modulation is kept small and decoupled from the next segment to avoid crosstalk and significant modulation of the rf drive signal. An error evaluation of the system is made. The technical implementation and prototype performance are described. Prototype tests indicate that the phase error around the ring can be held below 1 degree with this relatively simple system.

  12. The Rich and the Poor: The Construction of an Affluence Line from the Poverty Line

    Science.gov (United States)

    Medeiros, Marcelo

    2006-01-01

    The paper proposes a simple methodology to estimate an affluence line that depends on the knowledge of the income distribution and the poverty line for a given population. The idea that poverty is morally unacceptable and can be eradicated through redistribution of wealth provides the grounds for the methodology. The line is defined as the value…

  13. Simple relation algebras

    CERN Document Server

    Givant, Steven

    2017-01-01

    This monograph details several different methods for constructing simple relation algebras, many of which are new with this book. By drawing these seemingly different methods together, all are shown to be aspects of one general approach, for which several applications are given. These tools for constructing and analyzing relation algebras are of particular interest to mathematicians working in logic, algebraic logic, or universal algebra, but will also appeal to philosophers and theoretical computer scientists working in fields that use mathematics. The book is written with a broad audience in mind and features a careful, pedagogical approach; an appendix contains the requisite background material in relation algebras. Over 400 exercises provide ample opportunities to engage with the material, making this a monograph equally appropriate for use in a special topics course or for independent study. Readers interested in pursuing an extended background study of relation algebras will find a comprehensive treatme...

  14. A Simple Harmonic Universe

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Peter W.; /Stanford U., ITP; Horn, Bart; Kachru, Shamit; /Stanford U., ITP /SLAC; Rajendran, Surjeet; /Johns Hopkins U. /Stanford U., ITP; Torroba, Gonzalo; /Stanford U., ITP /SLAC

    2011-12-14

    We explore simple but novel bouncing solutions of general relativity that avoid singularities. These solutions require curvature k = +1, and are supported by a negative cosmological term and matter with -1 < w < -1 = 3. In the case of moderate bounces (where the ratio of the maximal scale factor a{sub +} to the minimal scale factor a{sub -} is {Omicron}(1)), the solutions are shown to be classically stable and cycle through an infinite set of bounces. For more extreme cases with large a{sub +} = a{sub -}, the solutions can still oscillate many times before classical instabilities take them out of the regime of validity of our approximations. In this regime, quantum particle production also leads eventually to a departure from the realm of validity of semiclassical general relativity, likely yielding a singular crunch. We briefly discuss possible applications of these models to realistic cosmology.

  15. SIMPLE LIFE AND RELIGION

    Directory of Open Access Journals (Sweden)

    Ahmet YILDIRIM

    2014-07-01

    Full Text Available Individuals in terms of the economy in which we live is one of the most important phenomenon of the century. This phenomenon present itself as the only determinant of people's lives by entering almost makes itself felt. The mo st obvious objective needs of the economy by triggering motive is to induce people to consume . Consumer culture pervades all aspects of the situation are people . Therefore, these people have the blessing of culture , beauty and value all in the name of w hatever is consumed. This is way out of the siege of moral and religious values we have is to go back again . Referred by local cultural and religious values, based on today increasingly come to the fore and the Muslim way of life appears to be close to th e plain / lean preferred by many people life has been a way of life. Even the simple life , a way of life in the Western world , a conception of life , a philosophy, a movement as it has become widely accepted. Here in determining the Muslim way of life Pr ophet. Prophet (sa lived the kind of life a very important model, sample, and determining which direction is known. Religious values, which is the carrier of the prophets, sent to the society they have always been examples and models. Because every aspect of human life, his life style and the surrounding area has a feature. We also value his life that he has unknowingly and without learning and skills and to understand it is not possible to live our religion . We also our presentation, we mainly of Islam o utlook on life and predicted life - style, including the Prophet of Islam 's (sa simple life to scrutinize and lifestyle issues related to reveal , in short Islam's how life has embraced and the Prophet. Prophet's will try to find answers to questions reg arding how to live.

  16. Entropy Is Simple, Qualitatively

    Science.gov (United States)

    Lambert, Frank L.

    2002-10-01

    Qualitatively, entropy is simple. What it is, why it is useful in understanding the behavior of macro systems or of molecular systems is easy to state: Entropy increase from a macro viewpoint is a measure of the dispersal of energy from localized to spread out at a temperature T. The conventional q in qrev/T is the energy dispersed to or from a substance or a system. On a molecular basis, entropy increase means that a system changes from having fewer accessible microstates to having a larger number of accessible microstates. Fundamentally based on statistical and quantum mechanics, this approach is superior to the non-fundamental "disorder" as a descriptor of entropy change. The foregoing in no way denies the subtlety or the difficulty presented by entropy in thermodynamics—to first-year students or to professionals. However, as an aid to beginners in their quantitative study of thermodynamics, the qualitative conclusions in this article give students the advantage of a clear bird’s-eye view of why entropy increases in a wide variety of basic cases: a substance going from 0 K to T, phase change, gas expansion, mixing of ideal gases or liquids, colligative effects, and the Gibbs equation. See Letter re: this article.

  17. Quasispecies made simple.

    Directory of Open Access Journals (Sweden)

    J J Bull

    2005-11-01

    Full Text Available Quasispecies are clouds of genotypes that appear in a population at mutation-selection balance. This concept has recently attracted the attention of virologists, because many RNA viruses appear to generate high levels of genetic variation that may enhance the evolution of drug resistance and immune escape. The literature on these important evolutionary processes is, however, quite challenging. Here we use simple models to link mutation-selection balance theory to the most novel property of quasispecies: the error threshold-a mutation rate below which populations equilibrate in a traditional mutation-selection balance and above which the population experiences an error catastrophe, that is, the loss of the favored genotype through frequent deleterious mutations. These models show that a single fitness landscape may contain multiple, hierarchically organized error thresholds and that an error threshold is affected by the extent of back mutation and redundancy in the genotype-to-phenotype map. Importantly, an error threshold is distinct from an extinction threshold, which is the complete loss of the population through lethal mutations. Based on this framework, we argue that the lethal mutagenesis of a viral infection by mutation-inducing drugs is not a true error catastophe, but is an extinction catastrophe.

  18. A Simple Spectral Observer

    Directory of Open Access Journals (Sweden)

    Lizeth Torres

    2018-05-01

    Full Text Available The principal aim of a spectral observer is twofold: the reconstruction of a signal of time via state estimation and the decomposition of such a signal into the frequencies that make it up. A spectral observer can be catalogued as an online algorithm for time-frequency analysis because is a method that can compute on the fly the Fourier transform (FT of a signal, without having the entire signal available from the start. In this regard, this paper presents a novel spectral observer with an adjustable constant gain for reconstructing a given signal by means of the recursive identification of the coefficients of a Fourier series. The reconstruction or estimation of a signal in the context of this work means to find the coefficients of a linear combination of sines a cosines that fits a signal such that it can be reproduced. The design procedure of the spectral observer is presented along with the following applications: (1 the reconstruction of a simple periodical signal, (2 the approximation of both a square and a triangular signal, (3 the edge detection in signals by using the Fourier coefficients, (4 the fitting of the historical Bitcoin market data from 1 December 2014 to 8 January 2018 and (5 the estimation of a input force acting upon a Duffing oscillator. To round out this paper, we present a detailed discussion about the results of the applications as well as a comparative analysis of the proposed spectral observer vis-à-vis the Short Time Fourier Transform (STFT, which is a well-known method for time-frequency analysis.

  19. Simple inflationary quintessential model

    Science.gov (United States)

    de Haro, Jaume; Amorós, Jaume; Pan, Supriya

    2016-04-01

    In the framework of a flat Friedmann-Lemaître-Robertson-Walker geometry, we present a non-geodesically past complete model of our Universe without the big bang singularity at finite cosmic time, describing its evolution starting from its early inflationary era up to the present accelerating phase. We found that a hydrodynamical fluid with nonlinear equation of state could result in such scenario, which after the end of this inflationary stage, suffers a sudden phase transition and enters into the stiff matter dominated era, and the Universe becomes reheated due to a huge amount of particle production. Finally, it asymptotically enters into the de Sitter phase concluding the present accelerated expansion. Using the reconstruction technique, we also show that this background provides an extremely simple inflationary quintessential potential whose inflationary part is given by the well-known 1-dimensional Higgs potential, i.e., a double well inflationary potential, and the quintessential one by an exponential potential that leads to a deflationary regime after this inflation, and it can depict the current cosmic acceleration at late times. Moreover the Higgs potential leads to a power spectrum of the cosmological perturbations which fit well with the latest Planck estimations. Further, we compared our viable potential with some known inflationary quintessential potential, which shows that our quintessential model, that is, the Higgs potential combined with the exponential one, is an improved version of them because it contains an analytic solution that allows us to perform all analytic calculations. Finally, we have shown that the introduction of a nonzero cosmological constant simplifies the potential considerably with an analytic behavior of the background which again permits us to evaluate all the quantities analytically.

  20. production lines

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  1. Line facilities outline

    International Nuclear Information System (INIS)

    1998-08-01

    This book deals with line facilities. The contents of this book are outline line of wire telecommunication ; development of line, classification of section of line and theory of transmission of line, cable line ; structure of line, line of cable in town, line out of town, domestic cable and other lines, Optical communication ; line of optical cable, transmission method, measurement of optical communication and cable of the sea bottom, Equipment of telecommunication line ; telecommunication line facilities and telecommunication of public works, construction of cable line and maintenance and Regulation of line equipment ; regulation on technique, construction and maintenance.

  2. Una historia muy simple

    Directory of Open Access Journals (Sweden)

    Miha Mazzini

    2009-12-01

    Full Text Available Voy a contarles una historia muy simple. Probablemente no les parecerá nada espe- cial y no quiero robarles tiempo, así que voy a tratar de hacerlo lo más rápido posible. Me inscribí en psicología porque eso hizo mi mejor amiga. Éramos compañeras desde jardín de infantes y siempre la seguí en todo. En tercer año de facultad conoció a su novio y continuó sus estudios en otro país; por primera vez no podía seguirla. Cuando rendí todos los exámenes, el profesor me preguntó si estaba interesada en hacer mi tesis sobre el perfil psicológico de los participantes de reality shows. Accedí para no tener que pensar en otro tema, aunque no veía mucho la televisión porque me pasaba las noches entre los libros de estudio. Enseguida me di cuenta de que, evidentemente, el profesor había firmado un contrato con la emisora: a él lo empleaban y y yo era la que iba a tener que trabajar, pero no me importaba. La tesis de licenciatura no es más que eso y hay que hacerla. Yo evaluaba los candidatos y elegía a los participantes que vivirían juntos duran- te algunos meses. Como hacían el programa con una licencia extranjera y ya sabían qué le interesaba a la audiencia, yo tenía preparados los rasgos de los perfiles psicológicos que en ese aislamiento colectivo no resultan bien. Tuve que elegir gente variada, pero dentro de la media; nunca nada verdaderamente especial. Cuando me gradué, tuve las noches libres: de pronto tenía mucho más tiempo y podía haber visto el programa, pero ya había terminado. Pero oí que había sido todo un éxito y que sobre todo a los chicos les había encantado el reality y los participantes elegidos.

  3. Parallel Lines

    Directory of Open Access Journals (Sweden)

    James G. Worner

    2017-05-01

    Full Text Available James Worner is an Australian-based writer and scholar currently pursuing a PhD at the University of Technology Sydney. His research seeks to expose masculinities lost in the shadow of Australia’s Anzac hegemony while exploring new opportunities for contemporary historiography. He is the recipient of the Doctoral Scholarship in Historical Consciousness at the university’s Australian Centre of Public History and will be hosted by the University of Bologna during 2017 on a doctoral research writing scholarship.   ‘Parallel Lines’ is one of a collection of stories, The Shapes of Us, exploring liminal spaces of modern life: class, gender, sexuality, race, religion and education. It looks at lives, like lines, that do not meet but which travel in proximity, simultaneously attracted and repelled. James’ short stories have been published in various journals and anthologies.

  4. Simple improvements of a simple solution for inverting resolution

    NARCIS (Netherlands)

    J.C. Bioch (Cor); P.R.J. van der Laag

    1991-01-01

    textabstractIn this paper we address some simple improvements of the algorithm of Rouveirol and Puget [1989] for inverting resolution. Their approach is based on automatic change of representation called flattening and unflattening of clauses in a logic program. This enables a simple implementation

  5. Simple bone cyst of the mandible: Report of two cases

    International Nuclear Information System (INIS)

    Imanimoghaddam, M.; Javadian Langaroody, A.; Nemati, S.; Ataei Azimi, S.

    2011-01-01

    Despite their names, simple bone cysts are no longer categorized as cysts since they lack an epithelial lining. However, their nature remains controversial. The internal structure is totally radiolucent, sometimes showing multilocular appearance, although the lesion does not contain true septa and the ridges of bone is produced by the scalloping effect. We presented two cases of histopathologically confirmed simple bone cyst. Radiographic features such as multilocular appearance and significant buccal and lingual expansion are not usual findings for simple bone cyst, whereas evident in our presented cases.

  6. Multiple Lines of Evidence

    Energy Technology Data Exchange (ETDEWEB)

    Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Venzin, Alexander M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-03

    This paper discusses the process of identifying factors that influence the contamination level of a given decision area and then determining the likelihood that the area remains unacceptable. This process is referred to as lines of evidence. These lines of evidence then serve as inputs for the stratified compliance sampling (SCS) method, which requires a decision area to be divided into strata based upon contamination expectations. This is done in order to focus sampling efforts more within stratum where contamination is more likely and to use the domain knowledge about these likelihoods of the stratum remaining unacceptable to buy down the number of samples necessary, if possible. Two different building scenarios were considered as an example (see Table 3.1). SME expertise was elicited concerning four lines of evidence factors (see Table 3.2): 1) amount of contamination that was seen before decontamination, 2) post-decontamination air sampling information, 3) the applied decontaminant information, and 4) the surface material. Statistical experimental design and logistic regression modelling were used to help determine the likelihood that example stratum remained unacceptable for a given example scenario. The number of samples necessary for clearance was calculated by applying the SCS method to the example scenario, using the estimated likelihood of each stratum remaining unacceptable as was determined using the lines of evidence approach. The commonly used simple random sampling (SRS) method was also used to calculate the number of samples necessary for clearance for comparison purposes. The lines of evidence with SCS approach resulted in a 19% to 43% reduction in total number of samples necessary for clearance (see Table 3.6). The reduction depended upon the building scenario, as well as the level of percent clean criteria. A sensitivity analysis was also performed showing how changing the estimated likelihoods of stratum remaining unacceptable affect the number

  7. Similarity law for Widom lines and coexistence lines.

    Science.gov (United States)

    Banuti, D T; Raju, M; Ihme, M

    2017-05-01

    The coexistence line of a fluid separates liquid and gaseous states at subcritical pressures, ending at the critical point. Only recently, it became clear that the supercritical state space can likewise be divided into regions with liquidlike and gaslike properties, separated by an extension to the coexistence line. This crossover line is commonly referred to as the Widom line, and is characterized by large changes in density or enthalpy, manifesting as maxima in the thermodynamic response functions. Thus, a reliable representation of the coexistence line and the Widom line is important for sub- and supercritical applications that depend on an accurate prediction of fluid properties. While it is known for subcritical pressures that nondimensionalization with the respective species critical pressures p_{cr} and temperatures T_{cr} only collapses coexistence line data for simple fluids, this approach is used for Widom lines of all fluids. However, we show here that the Widom line does not adhere to the corresponding states principle, but instead to the extended corresponding states principle. We resolve this problem in two steps. First, we propose a Widom line functional based on the Clapeyron equation and derive an analytical, species specific expression for the only parameter from the Soave-Redlich-Kwong equation of state. This parameter is a function of the acentric factor ω and compares well with experimental data. Second, we introduce the scaled reduced pressure p_{r}^{*} to replace the previously used reduced pressure p_{r}=p/p_{cr}. We show that p_{r}^{*} is a function of the acentric factor only and can thus be readily determined from fluid property tables. It collapses both subcritical coexistence line and supercritical Widom line data over a wide range of species with acentric factors ranging from -0.38 (helium) to 0.34 (water), including alkanes up to n-hexane. By using p_{r}^{*}, the extended corresponding states principle can be applied within

  8. The simple map for a single-null divertor tokamak

    International Nuclear Information System (INIS)

    Punjabi, A.; Verma, A.; Boozer, A.

    1996-01-01

    We present the simple map for a single-null divertor tokamak. The simple map is an area-preserving map based on the idea that magnetic field lines are a single-degree-of-freedom time-dependent Hamiltonian system, and that the basic features of such systems near the X-point are generic. We obtain the properties of this map and the resulting footprints of field lines on the divertor plate. These include the width of the stochastic layer, the edge safety factor, the area of the footprint and the amount of magnetic flux diverted. We give the safety factor profile, the average and median values of strike angles, lengths and the Liapunov exponents. We describe how the effects of magnetic perturbations can be included in the simple map. We show how the map can be applied to the problem of the determination of heat flux on the divertor plate in tokamaks. (Author)

  9. SIMPLE MODELS OF COMPLEX BEHAVIOUR

    Indian Academy of Sciences (India)

    SIMPLE MODELS OF COMPLEX BEHAVIOUR · COMPLEXITY IN HUMAN AFFAIRS · COMPLEXITY IN STATISTICAL PHYSICS · DISORDER, CRITICALITY and ORDER IN EQUILIBRIUM SYSTEMS · COARSENING PHENOMENA · NONEQUILIBRIUM STEADY STATES · ORDERING INDUCED BY RANDOM DRIVING.

  10. The importance of simple microscopy.

    Science.gov (United States)

    Manzar, S

    2000-08-01

    A case of severe neonatal anaemia, the cause of which was found to be severe fetomaternal haemorrhage is presented. The diagnosis was confirmed by simple microscopic examination of the maternal blood using the technique of acid elution, the Kleihauer-Betke test. In the differential diagnosis of anaemia of a newborn, the diagnosis of fetomaternal haemorrhage must be considered and the simple Kleihauer-Betke test should be performed on the maternal blood as soon as possible.

  11. Describing Simple Data Access Services Version 1.1

    Science.gov (United States)

    Plante, Ray; Demleitner, Markus; Plante, Raymond; Delago, Jesus; Harrison, Paul; Tody, Doug; Plante, Ray; Demleitner, Markus

    2017-05-01

    An application that queries or consumes descriptions of VO resources must be able to recognize a resource's support for standard IVOA protocols. This specification describes how to describe a service that supports any of the four typed data access protocols - Simple Cone Search (SCS), Simple Image Access (SIA), Simple Spectral Access (SSA), Simple Line Access (SLA) - using the VOResource XML encoding standard. A key part of this specification is the set of VOResource XML extension schemas that define new metadata that are specific to those protocols. This document describes rules for describing such services within the context of IVOA Registries and data discovery as well as the VO Support Interfaces (VOSI) and service self-description. In particular, this document spells out the essential mark-up needed to identify support for a standard protocol and the base URL required to access the interface that supports that protocol.

  12. Simple machines made simple a teacher resource manual

    CERN Document Server

    Andre, Ralph E St

    1993-01-01

    This book allows you to present scientific principles and simple mechanics through hands-on cooperative learning activities. Using inexpensive materials (e.g., tape, paper clips), students build simple machines-such as levers, pulleys, spring scales, gears, wheels and axles, windmills, and wedges-that demonstrate how things work. Activities have easy-to-locate materials lists, time requirements, and step-by-step directions (usually illustrated) on presentation. Ideas for bulletin boards, learning centers, and computer-assisted instruction are an added bonus.

  13. SimpleETL: ETL Processing by Simple Specifications

    DEFF Research Database (Denmark)

    Andersen, Ove; Thomsen, Christian; Torp, Kristian

    2018-01-01

    where an organization upon request must delete all data about an individual. Another requirement is when facts are updated retrospectively. In this paper, we present the general framework SimpleETL which is currently used for Extract-Transform-Load (ETL) processing in a company with such requirements....... SimpleETL automatically handles all database interactions such as creating fact tables, dimensions, and foreign keys. The framework also has features for handling version management of facts and implements four different methods for handling deleted facts. The framework enables, e.g., data scientists...

  14. Radon entry into a simple test structure

    DEFF Research Database (Denmark)

    Andersen, C.E.; Søgaard-Hansen, J.; Majborn, B.

    1992-01-01

    membrane, and soil gas enters the cylinder through a changeable interface in the bottom. The depressurisation of the cylinder is controlled by a mass-flow controller, thereby limiting the influence of natural driving forces. Pressures, temperatures and radon concentrations are measured continuously...... in the cylinder and in selected locations in the soil. In this paper, the test structure is described, and initial results concerning the transport of soil gas and radon under steady-state conditions are reported. It is found that the soil in the vicinity of the structure is partially depleted with respect......A simple test structure for studies of radon entry into houses has been constructed at a field site at Riso National Laboratory. It consists of a 40 1, stainless-steel cylinder placed in a 0.52 m deep quadratic excavation with a side length of 2.4 m. The excavation is lined with an airtight...

  15. Lensing and dynamics in two simple steps

    Science.gov (United States)

    Agnello, A.; Auger, M. W.; Evans, N. W.

    2013-02-01

    We present a ready-to-use method to constrain the density distribution in spherically symmetric early-type galaxy lenses. Assuming a power-law density profile, then joint use of the virial theorem and the lens equation yields simple formulae for the power-law index (or logarithmic density gradient). Any dependence on orbital anisotropy can be tightly constrained or even erased completely. Our results rely just on surface brightnesses and line-of-sight kinematics, making deprojection unnecessary. We revisit three systems that have already been examined in the literature (the Cosmic Horseshoe, the Jackpot and B1608+656) and provide our estimates. Finally, we show that the method yields a good approximation for the density profile even when the true profile is a broken power law, albeit with a mild bias towards isothermality.

  16. Simple arithmetic: not so simple for highly math anxious individuals

    Science.gov (United States)

    Sprute, Lisa; Maloney, Erin A; Beilock, Sian L; Berman, Marc G

    2017-01-01

    Abstract Fluency with simple arithmetic, typically achieved in early elementary school, is thought to be one of the building blocks of mathematical competence. Behavioral studies with adults indicate that math anxiety (feelings of tension or apprehension about math) is associated with poor performance on cognitively demanding math problems. However, it remains unclear whether there are fundamental differences in how high and low math anxious individuals approach overlearned simple arithmetic problems that are less reliant on cognitive control. The current study used functional magnetic resonance imaging to examine the neural correlates of simple arithmetic performance across high and low math anxious individuals. We implemented a partial least squares analysis, a data-driven, multivariate analysis method to measure distributed patterns of whole-brain activity associated with performance. Despite overall high simple arithmetic performance across high and low math anxious individuals, performance was differentially dependent on the fronto-parietal attentional network as a function of math anxiety. Specifically, low—compared to high—math anxious individuals perform better when they activate this network less—a potential indication of more automatic problem-solving. These findings suggest that low and high math anxious individuals approach even the most fundamental math problems differently. PMID:29140499

  17. [Urokinase in the management of occluded PICC lines].

    Science.gov (United States)

    Muller, C; Jacquier, A; Varoquaux, A; Cohen, F; Louis, G; Gaubert, J Y; Moulin, G; Bartoli, J M; Vidal, V

    2010-03-01

    To determine the efficacy and safety of urokinase in the management of occluded PICC lines. A total of 587 PICC lines were placed over an 11 month period. During this period, 28 PICC lines (4.8%) became occluded: 12 occluded PICC lines were successfully managed by simple flushing with normal saline while 16 PICC lines were thrombolyzed with urokinase. After urokinase, 93.8% (15/16) of occluded PICC lines were completely patent. A single infusion of urokinase, 20,000 IU over 30 minutes, was used in all cases. No secondary occlusion or complication was noted after urokinase. Urokinase is effective and safe to restore patency to occluded PICC lines. The procedure is simple, and could be performed at the bedside by nursing staff after medical prescription. It is an alternative to over the wire PICC line exchange, that could reduce the risk of complication related to manipulations, patient discomfort and cost.

  18. Generalized Gradient Approximation Made Simple

    International Nuclear Information System (INIS)

    Perdew, J.P.; Burke, K.; Ernzerhof, M.

    1996-01-01

    Generalized gradient approximations (GGA close-quote s) for the exchange-correlation energy improve upon the local spin density (LSD) description of atoms, molecules, and solids. We present a simple derivation of a simple GGA, in which all parameters (other than those in LSD) are fundamental constants. Only general features of the detailed construction underlying the Perdew-Wang 1991 (PW91) GGA are invoked. Improvements over PW91 include an accurate description of the linear response of the uniform electron gas, correct behavior under uniform scaling, and a smoother potential. copyright 1996 The American Physical Society

  19. Simple Echoes and Subtle Reverberations

    Science.gov (United States)

    Keeports, David

    2010-01-01

    Reverberation within an enclosed space can be viewed as a superposition of a large number of simple echoes. The echoes that make up the sound of reverberation fall neatly into two categories, relatively loud and sparse early reflections, and relatively soft and dense late reflections. Ways in which readily available music production software can…

  20. Solving Simple Kinetics without Integrals

    Science.gov (United States)

    de la Pen~a, Lisandro Herna´ndez

    2016-01-01

    The solution of simple kinetic equations is analyzed without referencing any topic from differential equations or integral calculus. Guided by the physical meaning of the rate equation, a systematic procedure is used to generate an approximate solution that converges uniformly to the exact solution in the case of zero, first, and second order…

  1. Simple Machines in the Community

    Science.gov (United States)

    Bryan, Robert; Laroder, Aris; Tippins, Deborah; Emaz, Meliza; Fox, Ryan

    2008-01-01

    The community can be a powerful context and mini-laboratory for cultivating students' common understandings of science and mathematics. On the island of Panay in the Philippines, the community was the starting place for a group of fifth- and sixth-grade students to explore simple machines in their daily lives. What students learned in the process…

  2. Curious Consequences of Simple Sequences

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 1. Curious Consequences of Simple Sequences. A K Mallik. General Article Volume 12 Issue 1 January 2007 pp ... Author Affiliations. A K Mallik1. Department of Mechanical Engineering, Indian Institute of Technology, Kanpur 208 016, India.

  3. Grief: Difficult Times, Simple Steps.

    Science.gov (United States)

    Waszak, Emily Lane

    This guide presents techniques to assist others in coping with the loss of a loved one. Using the language of 9 layperson, the book contains more than 100 tips for caregivers or loved ones. A simple step is presented on each page, followed by reasons and instructions for each step. Chapters include: "What to Say"; "Helpful Things to Do"; "Dealing…

  4. Emergence Issues - not so simple

    African Journals Online (AJOL)

    Anaesthetics Supplement: Emergence Issues - not so simple. S Afr Fam Pract 2014. Vol 56 No 2 Supplement 1. Introduction. Emergence from anaesthesia is by definition the process of return to baseline physiological function of all organ systems after cessation of administration of general anaesthesia and is the stage from ...

  5. Model pseudopotential in simple metals

    International Nuclear Information System (INIS)

    Khanna, K.N.; Sharma, P.K.

    1980-01-01

    The model potential proposed by Sharma and Srivastava has been used to study the various properties of simple metals. New core radii have also been reported corresponding to three dielectric functions. For most metals, the model potential successfully describes the atomic properties. (author)

  6. The 'simple' general dental anaesthetic

    African Journals Online (AJOL)

    The patient who receives dental treatment under general anaesthesia is usually a child, one with special needs, or one who requires an extensive dental procedure. The term 'simple' general dental anaesthetic is therefore a misnomer. The concept of procedural sedation for dentistry is beyond the scope of this article. It.

  7. HEMATOLOGIC CHANGES FOLLOWING SIMPLE EXODONTIA,

    Science.gov (United States)

    Hematologic studies were carried out on 90 systemically healthy, young adult males, some of whom underwent a simple exodontic experience. In one...after exodontia . In the 4-hour study significant changes following extraction were noted for white blood cells, neutrophils, lymphocytes, hematocrit

  8. Simple Indolizidine and Quinolizidine Alkaloids.

    Science.gov (United States)

    Michael, Joseph P

    2016-01-01

    This review of simple indolizidine and quinolizidine alkaloids (i.e., those in which the parent bicyclic systems are in general not embedded in polycyclic arrays) is an update of the previous coverage in Volume 55 of this series (2001). The present survey covers the literature from mid-1999 to the end of 2013; and in addition to aspects of the isolation, characterization, and biological activity of the alkaloids, much emphasis is placed on their total synthesis. A brief introduction to the topic is followed by an overview of relevant alkaloids from fungal and microbial sources, among them slaframine, cyclizidine, Steptomyces metabolites, and the pantocins. The important iminosugar alkaloids lentiginosine, steviamine, swainsonine, castanospermine, and related hydroxyindolizidines are dealt with in the subsequent section. The fourth and fifth sections cover metabolites from terrestrial plants. Pertinent plant alkaloids bearing alkyl, functionalized alkyl or alkenyl substituents include dendroprimine, anibamine, simple alkaloids belonging to the genera Prosopis, Elaeocarpus, Lycopodium, and Poranthera, and bicyclic alkaloids of the lupin family. Plant alkaloids bearing aryl or heteroaryl substituents include ipalbidine and analogs, secophenanthroindolizidine and secophenanthroquinolizidine alkaloids (among them septicine, julandine, and analogs), ficuseptine, lasubines, and other simple quinolizidines of the Lythraceae, the simple furyl-substituted Nuphar alkaloids, and a mixed quinolizidine-quinazoline alkaloid. The penultimate section of the review deals with the sizable group of simple indolizidine and quinolizidine alkaloids isolated from, or detected in, ants, mites, and terrestrial amphibians, and includes an overview of the "dietary hypothesis" for the origin of the amphibian metabolites. The final section surveys relevant alkaloids from marine sources, and includes clathryimines and analogs, stellettamides, the clavepictines and pictamine, and bis

  9. a simple a simple excitation control excitation control excitation

    African Journals Online (AJOL)

    eobe

    produce the primary dc fluxes are usually placed on the rotor because it has to (in most cases) sustain only a small fraction of the armature current. In situations ... concentrated on the var control of a synchronous motor and the study was extended to over-excitation schemes for power factor control of power lines to save.

  10. 47 CFR 68.213 - Installation of other than “fully protected” non-system simple customer premises wiring.

    Science.gov (United States)

    2010-10-01

    ... non-system simple customer premises wiring. 68.213 Section 68.213 Telecommunication FEDERAL... protected” non-system simple customer premises wiring. (a) Scope of this rule. Provisions of this rule apply only to “unprotected” premises wiring used with simple installations of wiring for up to four line...

  11. RF and microwave coupled-line circuits

    CERN Document Server

    Mongia, R K; Bhartia, P; Hong, J; Gupta, K C

    2007-01-01

    This extensively revised edition of the 1999 Artech House classic, RF and Microwave Coupled-Line Circuits, offers you a thoroughly up-to-date understanding of coupled line fundamentals, explaining their applications in designing microwave and millimeter-wave components used in today's communications, microwave, and radar systems. The Second Edition includes a wealth of new material, particularly relating to applications. You find brand new discussions on a novel simple design technique for multilayer coupled circuits, high pass filters using coupled lines, software packages used for filter des

  12. A Min-max Relation for Monotone Path Systems in Simple Regions

    DEFF Research Database (Denmark)

    Cameron, Kathleen

    1996-01-01

    A monotone path system (MPS) is a finite set of pairwise disjointpaths (polygonal arcs) in the plane such that every horizontal line intersectseach of the paths in at most one point. We consider a simple polygon in thexy-plane which bounds the simple polygonal (closed) region D. Let T and B betwo...

  13. Simple Functions Spreadsheet tool presentation

    International Nuclear Information System (INIS)

    Grive, Mireia; Domenech, Cristina; Montoya, Vanessa; Garcia, David; Duro, Lara

    2010-09-01

    This document is a guide for users of the Simple Functions Spreadsheet tool. The Simple Functions Spreadsheet tool has been developed by Amphos 21 to determine the solubility limits of some radionuclides and it has been especially designed for Performance Assessment exercises. The development of this tool has been promoted by the necessity expressed by SKB of having a confident and easy-to-handle tool to calculate solubility limits in an agile and relatively fast manner. Its development started in 2005 and since then, it has been improved until the current version. This document describes the accurate and preliminary study following expert criteria that has been used to select the simplified aqueous speciation and solid phase system included in the tool. This report also gives the basic instructions to use this tool and to interpret its results. Finally, this document also reports the different validation tests and sensitivity analyses that have been done during the verification process

  14. Simple Electromagnetic Analysis in Cryptography

    Directory of Open Access Journals (Sweden)

    Zdenek Martinasek

    2012-07-01

    Full Text Available The article describes the main principle and methods of simple electromagnetic analysis and thus provides an overview of simple electromagnetic analysis.The introductions chapters describe specific SPA attack used visual inspection of EM traces, template based attack and collision attack.After reading the article, the reader is sufficiently informed of any context of SEMA.Another aim of the article is the practical realization of SEMA which is focused on AES implementation.The visual inspection of EM trace of AES is performed step by step and the result is the determination of secret key Hamming weight.On the resulting EM trace, the Hamming weight of the secret key 1 to 8 was clearly visible.This method allows reduction from the number of possible keys for following brute force attack.

  15. A simple electron plasma wave

    International Nuclear Information System (INIS)

    Brodin, G.; Stenflo, L.

    2017-01-01

    Considering a class of solutions where the density perturbations are functions of time, but not of space, we derive a new exact large amplitude wave solution for a cold uniform electron plasma. This result illustrates that most simple analytical solutions can appear even if the density perturbations are large. - Highlights: • The influence of large amplitude electromagnetic waves on electrostatic oscillations is found. • A generalized Mathieu equation is derived. • Anharmonic wave profiles are computed numerically.

  16. Simple and Realistic Data Generation

    DEFF Research Database (Denmark)

    Pedersen, Kenneth Houkjær; Torp, Kristian; Wind, Rico

    2006-01-01

    This paper presents a generic, DBMS independent, and highly extensible relational data generation tool. The tool can efficiently generate realistic test data for OLTP, OLAP, and data streaming applications. The tool uses a graph model to direct the data generation. This model makes it very simple...... to generate data even for large database schemas with complex inter- and intra table relationships. The model also makes it possible to generate data with very accurate characteristics....

  17. A simple electron plasma wave

    Energy Technology Data Exchange (ETDEWEB)

    Brodin, G., E-mail: gert.brodin@physics.umu.se [Department of Physics, Umeå University, SE-901 87 Umeå (Sweden); Stenflo, L. [Department of Physics, Linköping University, SE-581 83 Linköping (Sweden)

    2017-03-18

    Considering a class of solutions where the density perturbations are functions of time, but not of space, we derive a new exact large amplitude wave solution for a cold uniform electron plasma. This result illustrates that most simple analytical solutions can appear even if the density perturbations are large. - Highlights: • The influence of large amplitude electromagnetic waves on electrostatic oscillations is found. • A generalized Mathieu equation is derived. • Anharmonic wave profiles are computed numerically.

  18. Classification of simple current invariants

    CERN Document Server

    Gato-Rivera, Beatriz

    1992-01-01

    We summarize recent work on the classification of modular invariant partition functions that can be obtained with simple currents in theories with a center (Z_p)^k with p prime. New empirical results for other centers are also presented. Our observation that the total number of invariants is monodromy-independent for (Z_p)^k appears to be true in general as well. (Talk presented in the parallel session on string theory of the Lepton-Photon/EPS Conference, Geneva, 1991.)

  19. Simple waves in Hertzian chains.

    Science.gov (United States)

    McDonald, B Edward; Calvo, David

    2012-06-01

    The discrete system of equations for a chain consisting of a large number of spheres interacting via the Hertz force of index 3/2 in strain is examined in the very long wavelength limit, yielding an effective medium description. The resulting continuum second-order equation of motion possesses a subset of simple waves obeying a first-order equation of reduced index 5/4. These simple waves appear not to have examined before. For a given initial strain, the simple wave solution prescribes initial sphere centroid velocities. Together the initial strain and velocities are used in the second-order discrete system. Results for shock wave development compare very well between the second-order discrete system (minus physically valid oscillations) and the reduced first-order equation. A second-order simulation of colliding waves examines the ability of waves to pass through each other, with a phase advance accruing during the collision process. An arbitrary initial condition is shown to evolve toward a universal similarity solution proportional to (x/t)(4). A closed-form solution is given including the complete history of the waveform, shock location, and amplitude.

  20. Development of simple neutron counters

    International Nuclear Information System (INIS)

    Satoh, S.; Hirota, K.

    2014-01-01

    Position sensitive neutron detectors are used for neutron scattering, neutron imaging, and neutron radiography. Developments in neutron detectors are mainly focused on spatial resolution and high counting rate in these fields. After the Fukushima nuclear power plant disaster, many simple radiation counters are now marketed in Japan and are useful for estimating the radiation level. However, no simple, equivalent device exists for neutron measurements. In this work, we have developed simple neutron counters (LiM counter and HeM counter) with the following features. In the LiM counter, a 6 Li glass scintillator is employed as a neutron converter for a large dynamic range. A silicon photon MPPC (multi-pixel photon counter) detector is used separately for photon counting, thus reducing the size of the device. In the HeM counter, a 3 He neutron detector is employed. Both counters employ a pulse-height analysis function for ensuring reliable data and display the pulse-height distribution on a graphical liquid crystal display (G-LCD). The LiM counter can be used for about 6 h using a battery, operating at 264 mA and 5.1 V. (author)

  1. [Prospective evaluation of PICC line related complications].

    Science.gov (United States)

    Vidal, V; Muller, C; Jacquier, A; Giorgi, R; Le Corroller, T; Gaubert, J Y; Champsaur, P; Bartoli, J M; Moulin, G

    2008-04-01

    To report the occurrence of complications following placement of peripherally inserted central catheters (PICC). Materials and methods. A total of 127 PICC lines were placed in 115 patients for TPN (n=54), long-term antibiotics (n=29), chemotherapy (n=14) or miscellaneous intravenous therapy (n=18). All PICC lines were successfully inserted. PICC lines were used for a mean duration of 16 days (1-166 days). The following complications were recorded: occlusion (7%), rupture (1.6%), accidental withdrawal (2.4%), infection (3.1%) and venous thrombosis (2.4%). PICC lines are a simple, safe and effective alternative to conventional central venous catheters. The occurrence of complications, typically "mechanical", must be reduced and prevented by strict management of this type of central line by the treating team.

  2. Cytoscape ESP: simple search of complex biological networks.

    Science.gov (United States)

    Ashkenazi, Maital; Bader, Gary D; Kuchinsky, Allan; Moshelion, Menachem; States, David J

    2008-06-15

    Cytoscape enhanced search plugin (ESP) enables searching complex biological networks on multiple attribute fields using logical operators and wildcards. Queries use an intuitive syntax and simple search line interface. ESP is implemented as a Cytoscape plugin and complements existing search functions in the Cytoscape network visualization and analysis software, allowing users to easily identify nodes, edges and subgraphs of interest, even for very large networks. Availabiity: http://chianti.ucsd.edu/cyto_web/plugins/ ashkenaz@agri.huji.ac.il.

  3. Cable line engineering

    International Nuclear Information System (INIS)

    Jang, Hak Sin; Kim, Sin Yeong

    1998-02-01

    This book is about cable line engineering. It is comprised of nine chapters, which deals with summary of cable communication such as way, process of cable communication and optical communication, Line constant of transmission on primary constant, reflection and crosstalk, communication cable line of types like flat cable, coaxial cable and loaded cable, Install of communication line with types and facility of aerial line, construction method of communication line facility, Measurement of communication line, Carrier communication of summary, PCM communication with Introduction, regeneration relay system sampling and quantization and Electric communication service and general information network with mobile communication technique and satellite communication system.

  4. Manga Vectorization and Manipulation with Procedural Simple Screentone.

    Science.gov (United States)

    Yao, Chih-Yuan; Hung, Shih-Hsuan; Li, Guo-Wei; Chen, I-Yu; Adhitya, Reza; Lai, Yu-Chi

    2017-02-01

    Manga are a popular artistic form around the world, and artists use simple line drawing and screentone to create all kinds of interesting productions. Vectorization is helpful to digitally reproduce these elements for proper content and intention delivery on electronic devices. Therefore, this study aims at transforming scanned Manga to a vector representation for interactive manipulation and real-time rendering with arbitrary resolution. Our system first decomposes the patch into rough Manga elements including possible borders and shading regions using adaptive binarization and screentone detector. We classify detected screentone into simple and complex patterns: our system extracts simple screentone properties for refining screentone borders, estimating lighting, compensating missing strokes inside screentone regions, and later resolution independently rendering with our procedural shaders. Our system treats the others as complex screentone areas and vectorizes them with our proposed line tracer which aims at locating boundaries of all shading regions and polishing all shading borders with the curve-based Gaussian refiner. A user can lay down simple scribbles to cluster Manga elements intuitively for the formation of semantic components, and our system vectorizes these components into shading meshes along with embedded Bézier curves as a unified foundation for consistent manipulation including pattern manipulation, deformation, and lighting addition. Our system can real-time and resolution independently render the shading regions with our procedural shaders and drawing borders with the curve-based shader. For Manga manipulation, the proposed vector representation can be not only magnified without artifacts but also deformed easily to generate interesting results.

  5. Representing Simple Geometry Types in NetCDF-CF

    Science.gov (United States)

    Blodgett, D. L.; Koziol, B. W.; Whiteaker, T. L.; Simons, R.

    2016-12-01

    The Climate and Forecast (CF) metadata convention is well-suited for representing gridded and point-based observational datasets. However, CF currently has no accepted mechanism for representing simple geometry types such as lines and polygons. Lack of support for simple geometries within CF has unintentionally excluded a broad set of geoscientific data types from NetCDF-CF data encodings. For example, hydrologic datasets often contain polygon watershed catchments and polyline stream reaches in addition to point sampling stations and water management infrastructure. The latter has an associated CF specification. In the interest of supporting all simple geometry types within CF, a working group was formed following an EarthCube workshop on Advancing NetCDF-CF [1] to draft a CF specification for simple geometries: points, lines, polygons, and their associated multi-geometry representations [2]. The draft also includes parametric geometry types such as circles and ellipses. This presentation will provide an overview of the scope and content of the proposed specification focusing on mechanisms for representing coordinate arrays using variable length or continuous ragged arrays, capturing multi-geometries, and accounting for type-specific geometry artifacts such as polygon holes/interiors, node ordering, etc. The concepts contained in the specification proposal will be described with a use case representing streamflow in rivers and evapotranspiration from HUC12 watersheds. We will also introduce Python and R reference implementations developed alongside the technical specification. These in-development, open source Python and R libraries convert between commonly used GIS software objects (i.e. GEOS-based primitives) and their associated simple geometry CF representation. [1] http://www.unidata.ucar.edu/events/2016CFWorkshop/[2] https://github.com/bekozi/netCDF-CF-simple-geometry

  6. What Is a Simple Liquid?

    Directory of Open Access Journals (Sweden)

    Trond S. Ingebrigtsen

    2012-03-01

    Full Text Available This paper is an attempt to identify the real essence of simplicity of liquids in John Locke’s understanding of the term. Simple liquids are traditionally defined as many-body systems of classical particles interacting via radially symmetric pair potentials. We suggest that a simple liquid should be defined instead by the property of having strong correlations between virial and potential-energy equilibrium fluctuations in the NVT ensemble. There is considerable overlap between the two definitions, but also some notable differences. For instance, in the new definition simplicity is not a direct property of the intermolecular potential because a liquid is usually only strongly correlating in part of its phase diagram. Moreover, not all simple liquids are atomic (i.e., with radially symmetric pair potentials and not all atomic liquids are simple. The main part of the paper motivates the new definition of liquid simplicity by presenting evidence that a liquid is strongly correlating if and only if its intermolecular interactions may be ignored beyond the first coordination shell (FCS. This is demonstrated by NVT simulations of the structure and dynamics of several atomic and three molecular model liquids with a shifted-forces cutoff placed at the first minimum of the radial distribution function. The liquids studied are inverse power-law systems (r^{-n} pair potentials with n=18,6,4, Lennard-Jones (LJ models (the standard LJ model, two generalized Kob-Andersen binary LJ mixtures, and the Wahnstrom binary LJ mixture, the Buckingham model, the Dzugutov model, the LJ Gaussian model, the Gaussian core model, the Hansen-McDonald molten salt model, the Lewis-Wahnstrom ortho-terphenyl model, the asymmetric dumbbell model, and the single-point charge water model. The final part of the paper summarizes properties of strongly correlating liquids, emphasizing that these are simpler than liquids in general. Simple liquids, as defined here, may be

  7. What Is a Simple Liquid?

    Science.gov (United States)

    Ingebrigtsen, Trond S.; Schrøder, Thomas B.; Dyre, Jeppe C.

    2012-01-01

    This paper is an attempt to identify the real essence of simplicity of liquids in John Locke’s understanding of the term. Simple liquids are traditionally defined as many-body systems of classical particles interacting via radially symmetric pair potentials. We suggest that a simple liquid should be defined instead by the property of having strong correlations between virial and potential-energy equilibrium fluctuations in the NVT ensemble. There is considerable overlap between the two definitions, but also some notable differences. For instance, in the new definition simplicity is not a direct property of the intermolecular potential because a liquid is usually only strongly correlating in part of its phase diagram. Moreover, not all simple liquids are atomic (i.e., with radially symmetric pair potentials) and not all atomic liquids are simple. The main part of the paper motivates the new definition of liquid simplicity by presenting evidence that a liquid is strongly correlating if and only if its intermolecular interactions may be ignored beyond the first coordination shell (FCS). This is demonstrated by NVT simulations of the structure and dynamics of several atomic and three molecular model liquids with a shifted-forces cutoff placed at the first minimum of the radial distribution function. The liquids studied are inverse power-law systems (r-n pair potentials with n=18,6,4), Lennard-Jones (LJ) models (the standard LJ model, two generalized Kob-Andersen binary LJ mixtures, and the Wahnstrom binary LJ mixture), the Buckingham model, the Dzugutov model, the LJ Gaussian model, the Gaussian core model, the Hansen-McDonald molten salt model, the Lewis-Wahnstrom ortho-terphenyl model, the asymmetric dumbbell model, and the single-point charge water model. The final part of the paper summarizes properties of strongly correlating liquids, emphasizing that these are simpler than liquids in general. Simple liquids, as defined here, may be characterized in three quite

  8. Simple Simulations of DNA Condensation

    Energy Technology Data Exchange (ETDEWEB)

    STEVENS,MARK J.

    2000-07-12

    Molecular dynamics simulations of a simple, bead-spring model of semiflexible polyelectrolytes such as DNA are performed. All charges are explicitly treated. Starting from extended, noncondensed conformations, condensed structures form in the simulations with tetravalent or trivalent counterions. No condensates form or are stable for divalent counterions. The mechanism by which condensates form is described. Briefly, condensation occurs because electrostatic interactions dominate entropy, and the favored Coulombic structure is a charge ordered state. Condensation is a generic phenomena and occurs for a variety of polyelectrolyte parameters. Toroids and rods are the condensate structures. Toroids form preferentially when the molecular stiffness is sufficiently strong.

  9. A simple Cavendish experimental apparatus

    Science.gov (United States)

    Kossler, W. J.; Klein, Susann; Morrow, Dominick; Juliao, Andre

    2016-03-01

    A simple Cavendish apparatus is described that allows measurement of the gravitational constant G and makes observable the gravitational attraction between commonplace objects. The apparatus consists of a torsion balance constructed from readily available materials, including lead bricks and fishing weights ("sinkers"). A computer program is used to determine the gravitational field at the location of the small mass due to a nearby lead brick, which allows students to gain experience with numerical methods. Experimental results obtained are compatible with the accepted value of G.

  10. Windows Phone 7 Made Simple

    CERN Document Server

    Trautschold, Martin

    2011-01-01

    With Windows Phone 7, Microsoft has created a completely new smartphone operating system that focuses on allowing users to be productive with their smartphone in new ways, while offering seamless integration and use of Microsoft Office Mobile as well as other productivity apps available in the Microsoft App Store. Windows Phone 7 Made Simple offers a clear, visual, step-by-step approach to using your Windows Phone 7 smartphone, no matter what the manufacturer. Author Jon Westfall is an expert in mobile devices, recognized by Microsoft as a "Most Valuable Professional" with experience

  11. Computer electronics made simple computerbooks

    CERN Document Server

    Bourdillon, J F B

    1975-01-01

    Computer Electronics: Made Simple Computerbooks presents the basics of computer electronics and explains how a microprocessor works. Various types of PROMs, static RAMs, dynamic RAMs, floppy disks, and hard disks are considered, along with microprocessor support devices made by Intel, Motorola and Zilog. Bit slice logic and some AMD bit slice products are also described. Comprised of 14 chapters, this book begins with an introduction to the fundamentals of hardware design, followed by a discussion on the basic building blocks of hardware (NAND, NOR, AND, OR, NOT, XOR); tools and equipment that

  12. Systems analysis made simple computerbooks

    CERN Document Server

    Antill, Lyn

    1980-01-01

    Systems Analysis: Made Simple Computerbooks introduces the essential elements of information systems analysis and design and teaches basic technical skills required for the tasks involved. The book covers the aspects to the design of an information system; information systems and the organization, including the types of information processing activity and computer-based information systems; the role of the systems analyst; and the human activity system. The text also discusses information modeling, socio-technical design, man-machine interface, and the database design. Software specification

  13. On-line learning from clustered input examples

    NARCIS (Netherlands)

    Riegler, Peter; Biehl, Michael; Solla, Sara A.; Marangi, Carmela; Marinaro, Maria; Tagliaferri, Roberto

    1996-01-01

    We analyse on-line learning of a linearly separable rule with a simple perceptron. Example inputs are taken from two overlapping clusters of data and the rule is defined through a teacher vector which is in general not aligned with the connection line of the cluster centers. We find that the Hebb

  14. VT Electric Transmission Line Corridors - corridor lines

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

  15. iPad Made Simple

    CERN Document Server

    Trautschold, Martin; Learning, MSL Made Simple

    2010-01-01

    The new iPad is sleek, powerful, and most importantly, it's much more than just a big iPhone. Your iPad is can be used for reading, surfing the web, emailing, watching TV/Movies, getting work done, and much more. And with the upcoming wave of iPad apps, the possibilities are endless. iPad X Made Simple clarifies all of the key features on the iPad, introduces what's new, and also reveals dozens of time-saving shortcuts and techniques. The book has over 1,000 screen shots that are carefully annotated with step-by-step instructions. * Clear instructions on how to set up and use the iPad * Illust

  16. The simple approach to deposition

    International Nuclear Information System (INIS)

    Jensen, N.O.

    1980-01-01

    The use of a simple top hat plume model in conjunction with the principle of source depletion facilitates an analytical treatment of the deposition problem. With such a model, explicit formulae for downwind deposition amounts and ground level atmospheric concentrations are given. The method has the advantage of allowing estimates of the most unfavorable parameter combinations for, say, the maximum deposition that can occur at a given distance from the source. With regard to the land contamination problem, where an area is defined as 'contaminated' when the amount of deposited material is greater than some minimum value, estimates of, for example, the maximum area contaminated and the maximum amount of contamination deposited will also be given

  17. Methadone radioimmunoassay: two simple methods

    International Nuclear Information System (INIS)

    Robinson, K.; Smith, R.N.

    1983-01-01

    Two simple and economical radioimmunoassays for methadone in blood or urine are described. Haemolysis, decomposition, common anticoagulants and sodium fluoride do not affect the results. One assay used commercially-available [1- 3 H](-)-methadone hydrobromide as the label, while the other uses a radioiodinated conjugate of 4-dimethylamino-2,2-diphenylpentanoic acid and L-tyrosine methyl ester. A commercially-available antiserum is used in both assays. Normethadone and α-methadol cross-react to a small extent with the antiserum while methadone metabolites, dextropropoxyphene, dipipanone and phenadoxone have negligible cross-reactivities. The 'cut-offs' of the two assays as described are 30 and 33 ng ml -1 for blood, and 24 and 21 ng ml -1 for urine. The assay using the radioiodinated conjugate can be made more sensitive if required by increasing the specific activity of the label. (author)

  18. Simple scheme for gauge mediation

    International Nuclear Information System (INIS)

    Murayama, Hitoshi; Nomura, Yasunori

    2007-01-01

    We present a simple scheme for constructing models that achieve successful gauge mediation of supersymmetry breaking. In addition to our previous work [H. Murayama and Y. Nomura, Phys. Rev. Lett. 98, 151803 (2007)] that proposed drastically simplified models using metastable vacua of supersymmetry breaking in vectorlike theories, we show there are many other successful models using various types of supersymmetry-breaking mechanisms that rely on enhanced low-energy U(1) R symmetries. In models where supersymmetry is broken by elementary singlets, one needs to assume U(1) R violating effects are accidentally small, while in models where composite fields break supersymmetry, emergence of approximate low-energy U(1) R symmetries can be understood simply on dimensional grounds. Even though the scheme still requires somewhat small parameters to sufficiently suppress gravity mediation, we discuss their possible origins due to dimensional transmutation. The scheme accommodates a wide range of the gravitino mass to avoid cosmological problems

  19. Significant gamma-ray lines from dark matter annihilation

    Energy Technology Data Exchange (ETDEWEB)

    Duerr, Michael [DESY, Notkestrasse 85, 22607 Hamburg (Germany); Fileviez Perez, Pavel; Smirnov, Juri [Max-Planck-Institut fuer Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany)

    2016-07-01

    Gamma-ray lines from dark matter annihilation are commonly seen as a ''smoking gun'' for the particle nature of dark matter. However, in many dark matter models the continuum background from tree-level annihilations makes such a line invisible. I present two simple extensions of the Standard Model where the continuum contributions are suppressed and the gamma-ray lines are easily visible over the continuum background.

  20. Simple radiography by Imaging Plate

    Energy Technology Data Exchange (ETDEWEB)

    Takata, Shigeru; Koyama, Motoko; Tanizaki, Yoshiyuki [Tokyo Metropolitan Industrial Technology Research Insitute, Tokyo (Japan)

    1998-12-31

    Photo-stimulable phosphor is a material which emits luminescence by incitement of light. As useful photo-stimulable phosphor, alkali halide, like BaFBr: Eu, II - VI compound, like SrS: Eu and oxide, such as Al{sub 2}O{sub 3}: Care reported at present. Imaging Plate is a popular name of products, which is composed of thin layer of the phosphor fixed plastic plate. Photo-stimulable luminescence of Imaging Plate is emitted by scanning with narrow beam of incitement light. The light of luminescence is separated from incitement light by filter and it`s intensity is measured. The intensity of luminescence is proportional to absorbed dose of Imaging Plate from incident radiation. The map of luminescence intensity makes radiation image like radiograph taken by X-ray film. Reusability and usability of digital image are another advantage. The problem to solve of Imaging Plate are less resolution than X-ray film, expensive reading instrument and fading, which means decrease of luminescence intensity depend on elapse time after irradiation. High sensitivity of Imaging Plate makes possible of simple radiography by small radiation source. In Japanese law, sealed radioisotopes source less than 3.7 MBq can use without permission and register. If radiograph can be taken by sealed source less than 3.7 MBq, application of radiography is widely developed. So we try to take radiographs of some objects using Imaging Plate and sealed radioisotope sources under 3.7 MBq. As the result, useful radiographs are taken under conditions that exposure time is more than a few hours and distance between the source and the Plate is less than 30 cm. Quality of the image is poor than general radiograph by large radiation source. But the simple radiography taken by small source is of great value. (J.P.N.)

  1. Lined canvas paintings

    DEFF Research Database (Denmark)

    Krarup Andersen, Cecil

    2013-01-01

    This work evaluates the lining history of the Danish Golden Age collection of canvas paintings from the nineteenths century at SMK, The National Gallery of Denmark, and seeks to understand the moisture sensitivity of the paintings before and after lining. This is done by chemical analysis...... and tensile testing samples from the tacking edges as well as lined mock-up samples. The ability of the different lining techniques to support canvas paintings is evaluated in terms of their initial stretching and during fluctuations of relative humidity. Six different combinations of lining adhesives...... and textiles were examined. These included the adhesives Beva 371, Plextol D360, wax-resin, and glue-paste. The lining textiles were linen and polyester sailcloth. A naturally aged canvas painting and a modern painting were lined using these materials and methods. Testing of the lined paintings included uni...

  2. Lined canvas paintings

    DEFF Research Database (Denmark)

    Krarup Andersen, Cecil

    2013-01-01

    and tensile testing samples from the tacking edges as well as lined mock-up samples. The ability of the different lining techniques to support canvas paintings is evaluated in terms of their initial stretching and during fluctuations of relative humidity. Six different combinations of lining adhesives...

  3. Simple snoring: not quite so simple after all?

    Science.gov (United States)

    Deary, Vincent; Ellis, Jason G; Wilson, Janet A; Coulter, Cheryl; Barclay, Nicola L

    2014-12-01

    Simple snoring (SS), in the absence of obstructive sleep apnoea (OSA), is a common problem, yet our understanding of its causes and consequences is incomplete. Our understanding is blurred by the lack of consistency in the definition of snoring, methods of assessment, and degree of concomitant complaints. Further, it remains contentious whether SS is independently associated with daytime sleepiness, or adverse health outcomes including cardiovascular disease and metabolic syndrome. Regardless of this lack of clarity, it is likely that SS exists on one end of a continuum, with OSA at its polar end. This possibility highlights the necessity of considering an otherwise 'annoying' complaint, as a serious risk factor for the development and progression of sleep apnoea, and consequent poor health outcomes. In this review, we: 1) highlight variation in prevalence estimates of snoring; 2) review the literature surrounding the distinctions between SS, upper airway resistance syndrome (UARS) and OSA; 3) present the risk factors for SS, in as far as it is distinguishable from UARS and OSA; and 4) describe common correlates of snoring, including cardiovascular disease, metabolic syndrome, and daytime sleepiness. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. A Simple Demonstration Model of Osmosis

    Science.gov (United States)

    Morse, Joseph G.

    1999-01-01

    A simple device constructed from a wire screen, a large beaker, beans, and oats is described. It provides a simple and effective visual model of the phenomenon of osmosis and, by extension, the origin of other colligative properties of solutions.

  5. Two Simple Models for Fracking

    Science.gov (United States)

    Norris, Jaren Quinn

    Recent developments in fracking have enable the recovery of oil and gas from tight shale reservoirs. These developments have also made fracking one of the most controversial environmental issues in the United States. Despite the growing controversy surrounding fracking, there is relatively little publicly available research. This dissertation introduces two simple models for fracking that were developed using techniques from non-linear and statistical physics. The first model assumes that the volume of induced fractures must be equal to the volume of injected fluid. For simplicity, these fractures are assumed to form a spherically symmetric damage region around the borehole. The predicted volumes of water necessary to create a damage region with a given radius are in good agreement with reported values. The second model is a modification of invasion percolation which was previously introduced to model water flooding. The reservoir rock is represented by a regular lattice of local traps that contain oil and/or gas separated by rock barriers. The barriers are assumed to be highly heterogeneous and are assigned random strengths. Fluid is injected from a central site and the weakest rock barrier breaks allowing fluid to flow into the adjacent site. The process repeats with the weakest barrier breaking and fluid flowing to an adjacent site each time step. Extensive numerical simulations were carried out to obtain statistical properties of the growing fracture network. The network was found to be fractal with fractal dimensions differing slightly from the accepted values for traditional percolation. Additionally, the network follows Horton-Strahler and Tokunaga branching statistics which have been used to characterize river networks. As with other percolation models, the growth of the network occurs in bursts. These bursts follow a power-law size distribution similar to observed microseismic events. Reservoir stress anisotropy is incorporated into the model by assigning

  6. On \\omega-categorical simple theories

    OpenAIRE

    Palacin, Daniel

    2011-01-01

    In the present paper we shall prove that countable \\omega-categorical simple CM-trivial theories and countable \\omega-categorical simple theories with strong stable forking are low. In addition, we observe that simple theories of bounded finite weight are low.

  7. Simple substrates for complex cognition

    Directory of Open Access Journals (Sweden)

    Peter Dayan

    2008-12-01

    Full Text Available Complex cognitive tasks present a range of computational and algorithmic challenges for neural accounts of both learning and inference. In particular, it is extremely hard to solve them using the sort of simple policies that have been extensively studied as solutions to elementary Markov decision problems. There has thus been recent interest in architectures for the instantiation and even learning of policies that are formally more complicated than these, involving operations such as gated working memory. However, the focus of these ideas and methods has largely been on what might best be considered as automatized, routine or, in the sense of animal conditioning, habitual, performance. Thus, they have yet to provide a route towards understanding the workings of rule-based control, which is critical for cognitively sophisticated competence. Here, we review a recent suggestion for a uniform architecture for habitual and rule-based execution, discuss some of the habitual mechanisms that underpin the use of rules, and consider a statistical relationship between rules and habits.

  8. Simple model for dice loading

    Science.gov (United States)

    Nagler, Jan; Richter, Peter H.

    2010-03-01

    Dice tossing is commonly believed to be random. However, throwing a fair cube is a dissipative process that is well described by deterministic classical mechanics. In Nagler and Richter (2008 Phys. Rev. E 78 036207; featured in 2008 Nature 455 434), we proposed a simplified model to analyze the origin of the pseudorandomness: a barbell with two masses at its tips with only two final outcomes. In order to keep things simple, we focused on the symmetrical case of equal masses. Here, we complete the picture by considering the general asymmetric case of unequal masses. We show how, depending on the initial conditions, dissipation during bounces, and mass asymmetry, the degree of unpredictability varies. Our analysis reveals, for the simplest possible non-trivial dice throwing model, the effect of dice loading. A surprising consequence of dynamical resonances is that an experienced player may benefit sometimes more from an unloaded than from a loaded barbell. In addition, we investigate the influence of loading on the symmetry breaking process causing one mass to come to rest earlier than the others.

  9. Simple model for molecular scattering

    Science.gov (United States)

    Mehta, Nirav; Ticknor, Christopher; Hazzard, Kaden

    2017-04-01

    The collisions of ultracold molecules are qualitatively different from the collisions of ultracold atoms due to the high density of bimolecular resonances near the collision energy. We present results from a simple N-channel scattering model with square-well channel potentials and constant channel couplings (inside the well) designed to reproduce essential features of chaotic molecular scattering. The potential depths and channel splittings are tuned to reproduce the appropriate density of states for the short-range bimolecular collision complex (BCC), which affords a direct comparison of the resulting level-spacing distribution to that expected from random matrix theory (RMT), namely the so-called Wigner surmise. The density of states also sets the scale for the rate of dissociation from the BCC to free molecules, as approximated by transition state theory (TST). Our model affords a semi-analytic solution for the scattering amplitude in the open channel, and a determinantal equation for the eigenenergies of the short-ranged BCC. It is likely the simplest finite-ranged scattering model that can be compared to expectations from the approximations of RMT, and TST. The validity of these approximations has implications for the many-channel Hubbard model recently developed. This research was funded in part by the National Science Foundation under Grant No. NSF PHY-1125915.

  10. Colligative properties of simple solutions.

    Science.gov (United States)

    Andrews, F C

    1976-11-05

    Vapor pressure lowering, osmotic pressure, boiling point elevation, and freezing point depression are all related quantitatively to the decrease in micro(1)(soln) upon the addition of solute in forming a solution. In any equilibrium system, regardless of whether it is in a gravitational field or whether it contains walls, semipermeable membranes, phase transitions, or solutes, all equilibria are maintained locally, in the small region of the equilibrium, by the equality of micro(1)(soln). If there are several subsystems in a gravitational field, at any fixed height, microi will have the same value in each subsystem into which substance i can get, and microi + M(i)gh is constant throughout the entire system. In a solution, there is no mechanism by which solvent and solute molecules could sustain different pressures. Both the solvent and solute are always under identical pressures in a region of solution, namely, the pressure of the solution in that region. Since nature does not know which component we call the solvent and which the solute, equations should be symmetric in the two (acknowledging that the nonvolatile component, if any, is commonly chosen to be solute). Simple molecular pictures illustrate what is happening to cause pressure (positive or negative) in liquids, vapor pressure of liquids, and the various colligative properties of solutions. The only effect of solute involved in these properties is that it dilutes the solvent, with the resulting increase in S and decrease in micro(1)(soln). Water can be driven passively up a tree to enormous heights by the difference between its chemical potential in the roots and the ambient air. There is nothing mysterious about the molecular bases for any of these phenomena. Biologists can use the well-understood pictures of these phenomena with confidence to study what is happening in the complicated living systems they consider.

  11. Covariant electromagnetic field lines

    Science.gov (United States)

    Hadad, Y.; Cohen, E.; Kaminer, I.; Elitzur, A. C.

    2017-08-01

    Faraday introduced electric field lines as a powerful tool for understanding the electric force, and these field lines are still used today in classrooms and textbooks teaching the basics of electromagnetism within the electrostatic limit. However, despite attempts at generalizing this concept beyond the electrostatic limit, such a fully relativistic field line theory still appears to be missing. In this work, we propose such a theory and define covariant electromagnetic field lines that naturally extend electric field lines to relativistic systems and general electromagnetic fields. We derive a closed-form formula for the field lines curvature in the vicinity of a charge, and show that it is related to the world line of the charge. This demonstrates how the kinematics of a charge can be derived from the geometry of the electromagnetic field lines. Such a theory may also provide new tools in modeling and analyzing electromagnetic phenomena, and may entail new insights regarding long-standing problems such as radiation-reaction and self-force. In particular, the electromagnetic field lines curvature has the attractive property of being non-singular everywhere, thus eliminating all self-field singularities without using renormalization techniques.

  12. Correcting slightly less simple movements

    Directory of Open Access Journals (Sweden)

    M.P. Aivar

    2005-01-01

    Full Text Available Many studies have analysed how goal directed movements are corrected in response to changes in the properties of the target. However, only simple movements to single targets have been used in those studies, so little is known about movement corrections under more complex situations. Evidence from studies that ask for movements to several targets in sequence suggests that whole sequences of movements are planned together. Planning related segments of a movement together makes it possible to optimise the whole sequence, but it means that some parts are planned quite long in advance, so that it is likely that they will have to be modified. In the present study we examined how people respond to changes that occur while they are moving to the first target of a sequence. Subjects moved a stylus across a digitising tablet. They moved from a specified starting point to two targets in succession. The first of these targets was always at the same position but it could have one of two sizes. The second target could be in one of two different positions and its size was different in each case. On some trials the first target changed size, and on some others the second target changed size and position, as soon as the subject started to move. When the size of the first target changed the subjects slowed down the first segment of their movements. Even the peak velocity, which was only about 150 ms after the change in size, was lower. Beside this fast response to the change itself, the dwell time at the first target was also affected: its duration increased after the change. Changing the size and position of the second target did not influence the first segment of the movement, but also increased the dwell time. The dwell time was much longer for a small target, irrespective of its initial size. If subjects knew in advance which target could change, they moved faster than if they did not know which could change. Taken together, these

  13. Glue-paste linings

    DEFF Research Database (Denmark)

    Fuster-López, Laura; Andersen, Cecil Krarup; Bouillon, Nicolas

    2017-01-01

    processes of lined canvas paintings. The impact of cyclic relative humidity on the biological and physical stability of the laminate structure is reported. Carefully constructed mock-ups, simulating lined canvas paintings, were used to examine the effect of pest infestation, mould growth, mechanical damage...

  14. Minnesota County Boundaries - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — Minnesota county boundaries derived from a combination of 1:24,000 scale PLS lines, 1:100,000 scale TIGER, 1:100,000 scale DLG, and 1:24,000 scale hydrography lines....

  15. A simple model for straggling evaluation

    CERN Document Server

    Wilson, J W; Tai, H; Tripathi, R K

    2002-01-01

    Simple straggling models had largely been abandoned in favor of Monte Carlo simulations of straggling which are accurate but time consuming, limiting their application in practice. The difficulty of simple analytic models is the failure to give accurate values past 85% of the particle range. A simple model is derived herein based on a second order approximation upon which rapid analysis tools are developed for improved understanding of material charged particle transmission properties.

  16. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  17. Multimoded reflective delay lines and their application to resonant delay line rf pulse compression systems

    Directory of Open Access Journals (Sweden)

    Sami G. Tantawi

    2004-03-01

    Full Text Available Pulse compression systems for future linear colliders, such as NLC and JLC, involve hundreds of kilometers of waveguide runs. These waveguides are highly overmoded to reduce the rf losses. In this paper we present a novel idea for utilizing these waveguides several times by using different modes. This idea is suitable for reflective delay lines. All the modes being used have low-loss characteristics. We describe mechanically simple mode transducers that switch the propagation mode from one configuration to another with no observable dispersion. We apply this technique to a resonant delay line pulse compression system. We also present experimental results that verify these theoretical developments.

  18. Simple utility functions with Giffen demand

    DEFF Research Database (Denmark)

    Sørensen, Peter Norman

    2007-01-01

    Simple utility functions with the Giffen property are presented: locally, the demand curve for a good is upward sloping. The utility functions represent continuous, monotone, convex preferences......Simple utility functions with the Giffen property are presented: locally, the demand curve for a good is upward sloping. The utility functions represent continuous, monotone, convex preferences...

  19. The Fluid Foil: The Seventh Simple Machine

    Science.gov (United States)

    Mitts, Charles R.

    2012-01-01

    A simple machine does one of two things: create a mechanical advantage (lever) or change the direction of an applied force (pulley). Fluid foils are unique among simple machines because they not only change the direction of an applied force (wheel and axle); they convert fluid energy into mechanical energy (wind and Kaplan turbines) or vice versa,…

  20. (SSR) and inter simple sequence repeat (ISSR)

    African Journals Online (AJOL)

    Finally, they were washed 3 to 4 times with sterile distilled water and inoculated aseptically on Murashige and Skoog (MS) basal medium free hormones. Single nodes resulted from seedlings cultured as explants. Inter simple sequence repeat (ISSR) and simple sequence repeat (SSR) primers used produced different ...

  1. Simple Numerical Analysis of Longboard Speedometer Data

    Science.gov (United States)

    Hare, Jonathan

    2013-01-01

    Simple numerical data analysis is described, using a standard spreadsheet program, to determine distance, velocity (speed) and acceleration from voltage data generated by a skateboard/longboard speedometer (Hare 2012 "Phys. Educ." 47 409-17). This simple analysis is an introduction to data processing including scaling data as well as…

  2. Sunspots and Their Simple Harmonic Motion

    Science.gov (United States)

    Ribeiro, C. I.

    2013-01-01

    In this paper an example of a simple harmonic motion, the apparent motion of sunspots due to the Sun's rotation, is described, which can be used to teach this subject to high-school students. Using real images of the Sun, students can calculate the star's rotation period with the simple harmonic motion mathematical expression.

  3. Stochastic Programming with Simple Integer Recourse

    NARCIS (Netherlands)

    Louveaux, François V.; van der Vlerk, Maarten H.

    1993-01-01

    Stochastic integer programs are notoriously difficult. Very few properties are known and solution algorithms are very scarce. In this paper, we introduce the class of stochastic programs with simple integer recourse, a natural extension of the simple recourse case extensively studied in stochastic

  4. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  5. Illustrating the Euler Line.

    Science.gov (United States)

    Rubillo, James M.

    1987-01-01

    Euler's discovery about the centroid of a triangle trisecting the line segment joining its circumference to its orthocenter is discussed. An activity that will help students review fundamental concepts is included. (MNS)

  6. Kansas Electric Transmission Lines

    Data.gov (United States)

    Kansas Data Access and Support Center — This data set is a digital representation of the EletcircTransmission lines for the State of Kansas as maintained by the Kansas Corporation Commission. Data is...

  7. Veterans Crisis Line

    Data.gov (United States)

    Department of Veterans Affairs — The caring responders at the Veterans Crisis Line are specially trained and experienced in helping Veterans of all ages and circumstances. Some of the responders are...

  8. Electric Power Transmission Lines

    Data.gov (United States)

    Department of Homeland Security — Transmission Lines are the system of structures, wires, insulators and associated hardware that carry electric energy from one point to another in an electric power...

  9. A simple polynomial method for optimizing upstream performance in multiuser VDSL2 lines

    NARCIS (Netherlands)

    Cordova, H.X.; Biesen, L. van; Brink, R.F.M. van den

    2012-01-01

    In telecommunications, much efforts are spent nowadays to make ICT more Green. Rising energy costs, an economic slowdown and environmental awareness have introduced serious strategic challenges to enterprises worldwide. There are a variety of new and existing technologies available that aid in green

  10. The Transmission Line as a Simple Example for Introducing Integral Equations to Undergraduates

    Science.gov (United States)

    Rothwell, E. J.

    2009-01-01

    Integral equations are becoming a common means for describing problems in electromagnetics, and so it is important to expose students to methods for their solution. Typically this is done using examples in antennas, scattering, or electrostatics. Unfortunately, many difficult issues arise in the formulation and solution of the associated…

  11. Nasca Lines, Peru

    Science.gov (United States)

    2001-01-01

    The Nasca Lines are located in the Pampa region of Peru, the desolate plain of the Peruvian coast 400 km south of Lima. The Lines were first spotted when commercial airlines began flying across the Peruvian desert in the 1920's. Passengers reported seeing 'primitive landing strips' on the ground below. The Lines were made by removing the iron-oxide coated pebbles which cover the surface of the desert. When the gravel is removed, they contrast with the light color underneath. In this way the lines were drawn as furrows of a lighter color. On the pampa, south of the Nasca Lines, archaeologists have now uncovered the lost city of the line-builders, Cahuachi. It was built nearly two thousand years ago and was mysteriously abandoned 500 years later. This ASTER sub-image covers an area of 14 x 18 km, was acquired on December 22, 2000, and is located at 14.7 degrees south latitude and 75.1 degrees west longitude. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  12. Anisotropic shift of the irreversibility line by neutron irradiation

    International Nuclear Information System (INIS)

    Sauerzopf, F.M.; Wiesinger, H.P.; Weber, H.W.; Crabtree, G.W.; Frischherz, M.C.; Kirk, M.A.

    1991-09-01

    The irreversibility line of high-T c superconductors is shifted considerably by irradiating the material with fast neutrons. The anisotropic and non-monotonous shift is qualitatively explained by a simple model based on an interaction between three pinning mechanisms, the intrinsic pinning by the ab-planes, the weak pinning by the pre-irradiation defect structure, and strong pinning by neutron induced defect cascades. A correlation between the cascade density and the position of the irreversibility line is observed

  13. Transmission Line Adapted Analytical Power Charts Solution

    Science.gov (United States)

    Sakala, Japhet D.; Daka, James S. J.; Setlhaolo, Ditiro; Malichi, Alec Pulu

    2017-08-01

    The performance of a transmission line has been assessed over the years using power charts. These are graphical representations, drawn to scale, of the equations that describe the performance of transmission lines. Various quantities that describe the performance, such as sending end voltage, sending end power and compensation to give zero voltage regulation, may be deduced from the power charts. Usually required values are read off and then converted using the appropriate scales and known relationships. In this paper, the authors revisit this area of circle diagrams for transmission line performance. The work presented here formulates the mathematical model that analyses the transmission line performance from the power charts relationships and then uses them to calculate the transmission line performance. In this proposed approach, it is not necessary to draw the power charts for the solution. However the power charts may be drawn for the visual presentation. The method is based on applying derived equations and is simple to use since it does not require rigorous derivations.

  14. Universal statistics of vortex lines.

    Science.gov (United States)

    Nahum, Adam; Chalker, J T

    2012-03-01

    We study the vortex lines that are a feature of many random or disordered three-dimensional systems. These show universal statistical properties on long length scales, and geometrical phase transitions analogous to percolation transitions but in distinct universality classes. The field theories for these problems have not previously been identified, so that while many numerical studies have been performed, a framework for interpreting the results has been lacking. We provide such a framework with mappings to simple supersymmetric models. Our main focus is on vortices in short-range-correlated complex fields, which show a geometrical phase transition that we argue is described by the CP(k|k) model (essentially the CP(n-1) model in the replica limit n→1). This can be seen by mapping a lattice version of the problem to a lattice gauge theory. A related field theory with a noncompact gauge field, the 'NCCP(k|k) model', is a supersymmetric extension of the standard dual theory for the XY transition, and we show that XY duality gives another way to understand the appearance of field theories of this type. The supersymmetric descriptions yield results relevant, for example, to vortices in the XY model and in superfluids, to optical vortices, and to certain models of cosmic strings. A distinct but related field theory, the RP(2l|2l) model (or the RP(n-1) model in the limit n→1) describes the unoriented vortices that occur, for instance, in nematic liquid crystals. Finally, we show that in two dimensions, a lattice gauge theory analogous to that discussed in three dimensions gives a simple way to see the known relation between two-dimensional percolation and the CP(k|k) σ model with a θ term.

  15. Hand-Drawn Resistors and a Simple Tester Using a Light-Emitting Diode

    Science.gov (United States)

    Kamata, Masahiro; Abe, Mayumi

    2012-01-01

    A thick line drawn on a sheet of paper with a 6B pencil is electrically conductive and its resistance can be roughly estimated using a simple tester made of a light-emitting diode (LED) and a lithium coin-type cell. Using this hand-drawn resistor and the LED tester, we developed teaching materials that help students to understand how electrical…

  16. Connecting the dots : analysis, development and applications of the SimpleX algorithm

    NARCIS (Netherlands)

    Kruip, Chael

    2011-01-01

    The SimpleX radiative transfer method is based on the interpretation of photons as particles interacting on a natural scale: the local mean free path. In our method, light is transported along the lines of an unstructured Delaunay mesh that encodes this natural distance and represents the physical

  17. Simple bone cysts of two brothers

    Energy Technology Data Exchange (ETDEWEB)

    An, Seo Young; An, Chang Hyeon; Choi, Karp Shik [Department of Oral and Maxillofacial Radiology, School of Dentistry, Kyungpook National University, Daegu (Korea, Republic of)

    2008-09-15

    17-year-old and 14-year-old brothers were referred for evaluation of the cystic lesions on the mandibular anterior area with no symptoms. Neither their mother nor the brothers could recall any past trauma to those areas. Panoramic and intraoral radiographs revealed moderately defined cystic lesions on their mandibular anterior areas. Biopsies on both lesions revealed simple bone cysts. Hereditary cause or familial history of simple bone cysts could not be found in literature review. This case may have been a coincidence. However, further investigation is needed to find the cause of simple bone cysts occurring in patients those are closely related.

  18. Simple bone cysts of two brothers

    International Nuclear Information System (INIS)

    An, Seo Young; An, Chang Hyeon; Choi, Karp Shik

    2008-01-01

    17-year-old and 14-year-old brothers were referred for evaluation of the cystic lesions on the mandibular anterior area with no symptoms. Neither their mother nor the brothers could recall any past trauma to those areas. Panoramic and intraoral radiographs revealed moderately defined cystic lesions on their mandibular anterior areas. Biopsies on both lesions revealed simple bone cysts. Hereditary cause or familial history of simple bone cysts could not be found in literature review. This case may have been a coincidence. However, further investigation is needed to find the cause of simple bone cysts occurring in patients those are closely related.

  19. A simple model for binary star evolution

    International Nuclear Information System (INIS)

    Whyte, C.A.; Eggleton, P.P.

    1985-01-01

    A simple model for calculating the evolution of binary stars is presented. Detailed stellar evolution calculations of stars undergoing mass and energy transfer at various rates are reported and used to identify the dominant physical processes which determine the type of evolution. These detailed calculations are used to calibrate the simple model and a comparison of calculations using the detailed stellar evolution equations and the simple model is made. Results of the evolution of a few binary systems are reported and compared with previously published calculations using normal stellar evolution programs. (author)

  20. Designing a simple apparatus for measuring kinematic variables

    Science.gov (United States)

    Kağan Temiz, Burak

    2014-09-01

    This study was conducted to develop a simple and inexpensive experimental apparatus that can measure the position of an object moving along a straight line at certain time intervals. For the construction of the apparatus, a battery-powered toy car, a fine-tipped paint brush, gouache (or watercolour) paint and paper tape were used. The working principle of the device is this: a short time after the toy car is turned on, its wheels start to turn with a constant angular velocity. A paint brush attached to one wheel also turns with a constant angular velocity. The paper tape is placed at a distance where the brush can touch it. Thus, with each round of the wheel, the brush lightly touches the paper tape and leaves a paint mark. Since the wheel turns at a constant angular velocity, the brush touches the tape once in each turn and leaves behind an equal amount of paint at equal intervals (one cycle at (T) time intervals). When the paper tape is pulled by attaching it to the object for which the motion is to be analyzed, lines are formed on the paper. By measuring the distance between the lines, the motion of the object can be analyzed and the position of the object can be identified at various moments. In this way, the speed and acceleration of the object can be measured.

  1. Malaysian meteoric water line

    International Nuclear Information System (INIS)

    Md Shahid Ayub

    2006-01-01

    The quest for Malaysian meteoric water line began in 1981 when environmental isotope hydrology was introduced. In the 1980, and with the establishment of three stations at Pengkalan Chepa, Kepala Batas and Kuah, the Malaysian Meteoric Water Line acquired then was δD = 8δ 18 O + 12.68. With the addition of another four stations, by the end of 1990s, the Malaysian Meteoric Water Line for the decade was established as δD = 8 δ 18 O + 11.76. Taking the overall result between 1980 and mid 2000s the Malaysian Meteoric Water Line was established as δD = 8 δ 18 O + 13.255 and the weighted mean precipitation is (-7.64, -46.74). In establishing this meteoric water line it was observed that the higher altitude station manifested poorer stable isotopes content as compared to lower altitude station. It was also observed that as the amount of rain increased, the stable isotopes content would decrease and vice versa. The effect is reversed when the amount is due to monsoon rains and tropical storms. (Author)

  2. Combinational reasoning of quantitative fuzzy topological relations for simple fuzzy regions.

    Directory of Open Access Journals (Sweden)

    Bo Liu

    Full Text Available In recent years, formalization and reasoning of topological relations have become a hot topic as a means to generate knowledge about the relations between spatial objects at the conceptual and geometrical levels. These mechanisms have been widely used in spatial data query, spatial data mining, evaluation of equivalence and similarity in a spatial scene, as well as for consistency assessment of the topological relations of multi-resolution spatial databases. The concept of computational fuzzy topological space is applied to simple fuzzy regions to efficiently and more accurately solve fuzzy topological relations. Thus, extending the existing research and improving upon the previous work, this paper presents a new method to describe fuzzy topological relations between simple spatial regions in Geographic Information Sciences (GIS and Artificial Intelligence (AI. Firstly, we propose a new definition for simple fuzzy line segments and simple fuzzy regions based on the computational fuzzy topology. And then, based on the new definitions, we also propose a new combinational reasoning method to compute the topological relations between simple fuzzy regions, moreover, this study has discovered that there are (1 23 different topological relations between a simple crisp region and a simple fuzzy region; (2 152 different topological relations between two simple fuzzy regions. In the end, we have discussed some examples to demonstrate the validity of the new method, through comparisons with existing fuzzy models, we showed that the proposed method can compute more than the existing models, as it is more expressive than the existing fuzzy models.

  3. Combinational Reasoning of Quantitative Fuzzy Topological Relations for Simple Fuzzy Regions

    Science.gov (United States)

    Liu, Bo; Li, Dajun; Xia, Yuanping; Ruan, Jian; Xu, Lili; Wu, Huanyi

    2015-01-01

    In recent years, formalization and reasoning of topological relations have become a hot topic as a means to generate knowledge about the relations between spatial objects at the conceptual and geometrical levels. These mechanisms have been widely used in spatial data query, spatial data mining, evaluation of equivalence and similarity in a spatial scene, as well as for consistency assessment of the topological relations of multi-resolution spatial databases. The concept of computational fuzzy topological space is applied to simple fuzzy regions to efficiently and more accurately solve fuzzy topological relations. Thus, extending the existing research and improving upon the previous work, this paper presents a new method to describe fuzzy topological relations between simple spatial regions in Geographic Information Sciences (GIS) and Artificial Intelligence (AI). Firstly, we propose a new definition for simple fuzzy line segments and simple fuzzy regions based on the computational fuzzy topology. And then, based on the new definitions, we also propose a new combinational reasoning method to compute the topological relations between simple fuzzy regions, moreover, this study has discovered that there are (1) 23 different topological relations between a simple crisp region and a simple fuzzy region; (2) 152 different topological relations between two simple fuzzy regions. In the end, we have discussed some examples to demonstrate the validity of the new method, through comparisons with existing fuzzy models, we showed that the proposed method can compute more than the existing models, as it is more expressive than the existing fuzzy models. PMID:25775452

  4. Simple tangible language elements for young children

    CSIR Research Space (South Africa)

    Smith, Andrew C

    2009-06-01

    Full Text Available In this paper, researchers have proposed simple tangible language elements for very young children to use when constructing programmes. The equivalent Turtle Talk instructions are given for comparison. Two examples of the tangible language code...

  5. The Invention Convention: Mind Meets Simple Machines.

    Science.gov (United States)

    Hadi-Tabassum, Samina

    1997-01-01

    Describes an Earth Day celebration where students had to design an invention made of simple machines that could crush an empty aluminum can through 10 rapid mechanical movements using materials foraged from the students' homes. (JRH)

  6. Simple Perturbation Example for Quantum Chemistry.

    Science.gov (United States)

    Goodfriend, P. L.

    1985-01-01

    Presents a simple example that illustrates various aspects of the Rayleigh-Schrodinger perturbation theory. The example is a particularly good one because it is straightforward and can be compared with both the exact solution and with experimental data. (JN)

  7. A simple low-cost cryogenic controller

    International Nuclear Information System (INIS)

    Mitchell, I.V.; Bartram, C.P.

    1977-01-01

    A simple, inexpensive cryogenic temperature controller is described. Temperatures from 78 K to 300 K are maintained to 0.1 K. A novel feature, using a power transistor for the heating element, is discussed. (Auth.)

  8. Simple and Clear Proofs of Stirling's Formula

    Science.gov (United States)

    Niizeki, Shozo; Araki, Makoto

    2010-01-01

    The purpose of our article is to show two simpler and clearer methods of proving Stirling's formula than the traditional and conventional ones. The distinction of our method is to use the simple trapezoidal formula.

  9. A Simple Preparation Method for Diphosphoimidazole

    DEFF Research Database (Denmark)

    Rosenberg, T.

    1964-01-01

    A simple method for the preparation of diphosphoimidazole is presented that involves direct phosphorylation of imidazole by phosphorus oxychloride in alkaline aqueous solution. Details are given on the use of diphosphoimidazole in preparing sodium phosphoramidate and certain phosphorylated amino...

  10. A simple device for embalming cadavers.

    Science.gov (United States)

    Janakiram, S; Balasubramanyam, V; Thomas, I M

    1998-01-01

    A simple design of a mobile embalming unit is presented that offers better quality embalming and is fairly economical. The technique is faster and consistently more reliable than the conventional gravity aided embalming.

  11. Simple shear of deformable square objects

    Science.gov (United States)

    Treagus, Susan H.; Lan, Labao

    2003-12-01

    Finite element models of square objects in a contrasting matrix in simple shear show that the objects deform to a variety of shapes. For a range of viscosity contrasts, we catalogue the changing shapes and orientations of objects in progressive simple shear. At moderate simple shear ( γ=1.5), the shapes are virtually indistinguishable from those in equivalent pure shear models with the same bulk strain ( RS=4), examined in a previous study. In theory, differences would be expected, especially for very stiff objects or at very large strain. In all our simple shear models, relatively competent square objects become asymmetric barrel shapes with concave shortened edges, similar to some types of boudin. Incompetent objects develop shapes surprisingly similar to mica fish described in mylonites.

  12. Newton's Law: Not so Simple after All

    Science.gov (United States)

    Robertson, William C.; Gallagher, Jeremiah; Miller, William

    2004-01-01

    One of the most basic concepts related to force and motion is Newton's first law, which essentially states, "An object at rest tends to remain at rest unless acted on by an unbalanced force. An object in motion in a straight line tends to remain in motion in a straight line unless acted upon by an unbalanced force." Judging by the time and space…

  13. Substoichiometric method in the simple radiometric analysis

    International Nuclear Information System (INIS)

    Ikeda, N.; Noguchi, K.

    1979-01-01

    The substoichiometric method is applied to simple radiometric analysis. Two methods - the standard reagent method and the standard sample method - are proposed. The validity of the principle of the methods is verified experimentally in the determination of silver by the precipitation method, or of zinc by the ion-exchange or solvent-extraction method. The proposed methods are simple and rapid compared with the conventional superstoichiometric method. (author)

  14. Simple Lie algebras and Dynkin diagrams

    International Nuclear Information System (INIS)

    Buccella, F.

    1983-01-01

    The following theorem is studied: in a simple Lie algebra of rank p there are p positive roots such that all the other n-3p/2 positive roots are linear combinations of them with integer non negative coefficients. Dykin diagrams are built by representing the simple roots with circles and drawing a junction between the roots. Five exceptional algebras are studied, focusing on triple junction algebra, angular momentum algebra, weights of the representation, antisymmetric tensors, and subalgebras

  15. Necessity of Antibiotics following Simple Exodontia

    OpenAIRE

    Yousuf, Waqas; Khan, Moiz; Mehdi, Hasan; Mateen, Sana

    2016-01-01

    Introduction. The aim of our study is to assess the need for postoperative antibiotics following simple exodontia and determine its role in minimizing patient discomfort and postoperative complications. Material and Methods. All the patients undergoing simple extractions were grouped into two categories: Group 1, patients receiving antibiotics, and Group 2, patients receiving no antibiotics. Patients were recalled on the sixth day to assess postoperative complications. On recall, patients wer...

  16. Sprayed concrete linings

    Energy Technology Data Exchange (ETDEWEB)

    Hindle, D.

    1999-12-01

    Sprayed concrete, or shotcrete, was invented in the 1920s for preserving dinosaur skeletons and was used underground initially in coalmines for the preservation and fine proofing of timber supports. Its use as a support lining in rock tunnelling was developed in the 1950s and 60s. The article surveys equipment available from major manufacturers and suppliers of concrete spraying equipment (Aliva, Cifa, GIA, Industri, Ingersoll Rand, etc.), specialist cement and additive manufacturers (Castle, Cement, Moria Carbotech). manufacturers of lattice girders and fibre reinforcement, and manufacturers of instrumentation for tunnel linings. 5 tabs., 9 photos.

  17. Simple waves in quasilinear hyperbolic systems. Part 1. Theory of simple waves and simple states. Examples of applications

    International Nuclear Information System (INIS)

    Grundland, A.M.; Zelazny, R.

    1983-01-01

    A new method of construction of solutions to nonlinear, nonelliptic systems of partial differential equations and especially nonhomogeneous ones is presented. These equations have been considered from the point of view of integral elements. The connections between the structure of the set of integral elements and the posssibility of a construction of special classes of solutions have been studied. These classes consist of what is called simple waves and k-waves (for homogeneous systems). They provide us with a possibility for a selection of simple integral elements from the set of all integral elements. Analysis has been performed using differential forms and Cartan theory of system in involution. The problem has been reduced to examining Pfaff forms. The Cauchy problem for Pfaff systems has been formulated and solved using the Riemann function. Some remarks concerning the notion of Baecklund transformations for the case of k-waves have been formulated. It is shown that in contrast to simple wave, the simple state has no gradient catastrophy. The presented technique of constructing the solutions in the form of simple states has been illustrated by the examples of Korteweg de Vries and four-dimensional Klein-Gordon, Sine-Gordon and Liouville equations. It has been shown that the known soliton equations are closely connected with the elliptical functions and especially with the P-Weierstrass functions. (author)

  18. Analysis of visible spectral lines in LHD helium discharge

    International Nuclear Information System (INIS)

    Wan, B.N.; Goto, M.; Morita, S.

    1999-06-01

    In this study, visible spectral lines in LHD helium discharges are analyzed and it was found that they could be well fitted with gaussian profile. The results reveal a simple mechanism of helium atom recycling. Ion temperatures were also derived from the fitting. A typical value of the ion temperature obtained was about 6 eV. (author)

  19. Lines and Pies and Bars, Oh My! Making Math Fun.

    Science.gov (United States)

    Scarnati, James T.; Platt, Robert B.

    1991-01-01

    The article discusses strategies for parents to help their children improve math skills. It examines graphing skills and looks at three types of graphs (line graph, bar graph, and pie chart). Various simple activities illustrate what all scientists and mathematicians do when conducting experiments or developing mathematical models. (SM)

  20. Testing hypotheses for differences between linear regression lines

    Science.gov (United States)

    Stanley J. Zarnoch

    2009-01-01

    Five hypotheses are identified for testing differences between simple linear regression lines. The distinctions between these hypotheses are based on a priori assumptions and illustrated with full and reduced models. The contrast approach is presented as an easy and complete method for testing for overall differences between the regressions and for making pairwise...

  1. Optocoupled line receiver input discriminates against narrow noise pulses

    CERN Document Server

    Napier, T M

    1977-01-01

    Describes a simple optocoupled interface which connects a data line to the receiving end of a data link that features pulse length discrimination to enhance noise pulse rejection. A rugged red LED, D /sub 1/, can bypass any reasonable fault currents to protect the relatively fragile optocoupler input diode. (0 refs).

  2. The Bottom Line: Industry and the Environment in South Africa ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    All economic activity depends on the environment. This simple fact has spurred the international community into giving more and more attention to the environment in general and the environmental performance of industry in particular. The Bottom Line is a major new contribution to the debates on industry and the ...

  3. Off-line software for large experimental setups

    International Nuclear Information System (INIS)

    Bruyant, F.

    1983-07-01

    The purpose of this report is to emphasize the importance of Off-line software for large experimental setups in High Energy Physics. Simple notions of program structuring, data structuring and software organization are discussed in the context of the software developped for the European Hybrid Spectrometer. (author)

  4. Bike Map Lines

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — Chapel Hill Bike Map Lines from KMZ file.This data came from the wiki comment board for the public, not an “official map” showing the Town of Chapel Hill's plans or...

  5. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  6. Defining line replaceable units

    NARCIS (Netherlands)

    Parada Puig, J.E.; Basten, Robertus Johannes Ida

    2015-01-01

    Defective capital assets may be quickly restored to their operational condition by replacing the item that has failed. The item that is replaced is called the Line Replaceable Unit (LRU), and the so-called LRU definition problem is the problem of deciding on which item to replace upon each type of

  7. America's Assembly Line

    DEFF Research Database (Denmark)

    Nye, David Edwin

    A social history of the assembly line, invented in 1913. Both praised as a boon to consumers and as a curse for workers, it has been satirized, imitated, and celebrated for 100 years. It has inspired fiction, comedy, cafeteria layouts, and suburban housing. It transformed industrial labor...

  8. Developing Green Line Products

    DEFF Research Database (Denmark)

    Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

    2011-01-01

    This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

  9. Drawing the Line

    DEFF Research Database (Denmark)

    Holm, Isak Winkel

    2016-01-01

    of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...

  10. LEAR: antiproton extraction lines

    CERN Multimedia

    Photographic Service

    1992-01-01

    Antiprotons, decelerated in LEAR to a momentum of 100 MeV/c (kinetic energy of 5.3 MeV), were delivered to the experiments in an "Ultra-Slow Extraction", dispensing some 1E9 antiprotons over times counted in hours. Beam-splitters and a multitude of beam-lines allowed several users to be supplied simultaneously.

  11. K-line photometry

    International Nuclear Information System (INIS)

    Henry, R.C.

    1979-01-01

    A brief review is given of more than a decade of work involving measurement of the strength of the K line of calcium in A-type stars. The effects of interstellar reddening are reexamined, and an improved estimate for the range in calcium abundance among field stars is obtained. (Auth.)

  12. Subjective poverty line definitions

    NARCIS (Netherlands)

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  13. Clamp Restrains Pressure Line

    Science.gov (United States)

    Aliberti, J. A.

    1982-01-01

    Safety restraint protects people and property if a high-pressure fitting fails. As long as pressure line remains attached at the fitting, clamp exerts essentially no force on hose. If fitting fails, force of fluid leaving free end of hose causes the cam on the clamp to compress hose with a positive locking action.

  14. On-line and off-line assessment of metacognition

    Directory of Open Access Journals (Sweden)

    Seda Saraç

    2012-03-01

    Full Text Available he study investigates the interrelationships between different on-line and off-line measures for assessing metacognition. The participants were 47 fifth grade elementary students. Metacognition was assessed through two off-line and two on-line measures. The off-line measures consisted of a teacher rating scale and a self-report questionnaire. The on-line measures were thinking aloud protocols and accuracy ratings of text comprehension. The results showed positive significant correlation between data from two off-line measures and negative significant correlation between data from two on-line measures. The off-line metacognitive measures had non-significant correlations with all on-line measures. Principal Component Analysis, performed on four metacognitive measures, yielded a two-factor solution and this two-factor solution accounted for 71.5 % of the sample variance. The data from two off-line measures loaded on the first component with a variance proportion of 38.6 % and the data from two on-line measures loaded on the second component with a variance proportion of 32.9%. The findings of the study showed that metacognitive processes form a complex structure that needs to be assessed using various methods. However, in the multi-method studies, using on-line and off-line measures together will be appropriate rather than using only on-line measures or only off-line measures.

  15. Berkeley Off-line Radioisotope Generator (BORG)

    International Nuclear Information System (INIS)

    Sudowe, Ralf; Patin, Joshua B.

    2001-01-01

    Development of chemical separations for the transactinides has traditionally been performed with longer-lived tracer activities purchased commercially. With these long-lived tracers, there is always the potential problem that the tracer atoms are not always in the same chemical form as the short-lived atoms produced in on-line experiments. This problem is especially severe for elements in groups 4 and 5 of the periodic table, where hydrolysis is present. The long-lived tracers usually are stored with a complexing agent to prevent sorption or precipitation. Chemistry experiments performed with these long-lived tracers are therefore not analogous to those chemical experiments performed in on-line experiments. One way to eliminate the differences between off-line and on-line chemistry experiments is through the use of a 252 Cf fission fragment collection device. A 252 Cf fission fragment collection device has already been constructed [1]. This device is limited in its capabilities. A new fission fragment device would allow the study of the chemical properties of the homologues of the heaviest elements. This new device would be capable of producing fission fragments for fast gas chemistry and aqueous chemistry experiments, long-lived tracers for model system development and neutrons for neutron activation. Fission fragment activities produced in this way should have the same chemical form as those produced in Cyclotron irradiations. The simple operation of this source will allow more rapid and reliable development of radiochemical separations with homologues of transactinide elements

  16. Process control and optimization with simple interval calculation method

    DEFF Research Database (Denmark)

    Pomerantsev, A.; Rodionova, O.; Høskuldsson, Agnar

    2006-01-01

    for the quality improvement in the course of production. The latter is an active quality optimization, which takes into account the actual history of the process. The advocate approach is allied to the conventional method of multivariate statistical process control (MSPC) as it also employs the historical process......Methods of process control and optimization are presented and illustrated with a real world example. The optimization methods are based on the PLS block modeling as well as on the simple interval calculation methods of interval prediction and object status classification. It is proposed to employ...... the series of expanding PLS/SIC models in order to support the on-line process improvements. This method helps to predict the effect of planned actions on the product quality and thus enables passive quality control. We have also considered an optimization approach that proposes the correcting actions...

  17. Mycoplasma removal: simple curative methods for viral supernatants.

    Science.gov (United States)

    Baronti, C; Pastorino, B; Charrel, R; de Lamballerie, X

    2013-02-01

    As a partner of the European Virus Archive (EVA) FP7 infrastructure, our research group is maintaining and developing a large virus collection. To meet the standards of the quality management system adopted by all European Virus Archive partners, the detection and eradication of mycoplasma in cell culture supernatants (stored at -80°C or freeze-dried) has to be improved. Although the methods for mycoplasma elimination from infected cell lines were largely described, the decontamination procedures of precious cell culture supernatants was poorly documented. In this study, a large panel of mycoplasma-contaminated virus stocks (enveloped and non enveloped, RNA and DNA viruses) was tested successfully for mycoplasma removal using two simple optimized methods. These easy-to-perform protocols, using respectively Plasmocin™ (InvivoGen, Cayla, France) and chloroform, were shown to remove mycoplasma completely from cell supernatant without incidence in viral infectivity. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Process control and optimization with simple interval calculation method

    DEFF Research Database (Denmark)

    Pomerantsev, A.; Rodionova, O.; Høskuldsson, Agnar

    2006-01-01

    Methods of process control and optimization are presented and illustrated with a real world example. The optimization methods are based on the PLS block modeling as well as on the simple interval calculation methods of interval prediction and object status classification. It is proposed to employ...... the series of expanding PLS/SIC models in order to support the on-line process improvements. This method helps to predict the effect of planned actions on the product quality and thus enables passive quality control. We have also considered an optimization approach that proposes the correcting actions...... for the quality improvement in the course of production. The latter is an active quality optimization, which takes into account the actual history of the process. The advocate approach is allied to the conventional method of multivariate statistical process control (MSPC) as it also employs the historical process...

  19. A simple regularization method for stable analytic continuation

    Science.gov (United States)

    Fu, Chu-Li; Dou, Fang-Fang; Feng, Xiao-Li; Qian, Zhi

    2008-12-01

    The problems of analytic continuation are frequently encountered in many practical applications. These problems are well known to be severely ill-posed and therefore several regularization methods have been suggested for solving them. In this paper we consider the problem of analytic continuation of the analytic function f(z) = f(x + iy) on a strip domain \\Omega=\\{z=x+iy\\in {\\bb C}|x\\in{\\bb R},|y|\\leq y_0\\} , where the data are given only on the line y = 0. We use a very simple and convenient method—the Fourier regularization method to solve this problem. Some sharp error estimates between the exact solution and its approximation are given and numerical examples show the method works effectively. The project is supported by the National Natural Science Foundation of China (Nos. 10671085, 10571079 and 10726017).

  20. The Design of SimpleITK

    Directory of Open Access Journals (Sweden)

    Bradley Christopher Lowekamp

    2013-12-01

    Full Text Available SimpleITK is a new interface to the Insight Segmentation andRegistration Toolkit (ITK designed to facilitate rapid prototyping, educationand scientific activities, via high level programminglanguages. ITK is a templated C++ library of image processingalgorithms and frameworks for biomedical and other applications, andit was designed to be generic, flexible and extensible. Initially, ITKprovided a direct wrapping interface to languages such as Python andTcl through the WrapITK system. Unlike WrapITK, which exposed ITK'scomplex templated interface, SimpleITK was designed to provide an easyto use and simplified interface to ITK's algorithms. It includesprocedural methods, hides ITK's demand driven pipeline, and provides atemplate-less layer. Also SimpleITK provides practical conveniencessuch as binary distribution packages and overloaded operators. Ouruser-friendly design goals dictated a departure from the directinterface wrapping approach of WrapITK, towards a new facadeclass structure that only exposes the required functionality, hidingITK's extensive template use. Internally SimpleITK utilizes a manualdescription of each filter with code-generation and advanced C++meta-programming to provide the higher-level interface, bringing thecapabilities of ITK to a wider audience. SimpleITK is licensed asopen source software under the Apache License Version 2.0 and more informationabout downloading it can be found at http://www.simpleitk.org.

  1. Clinical neurophysiological evaluation for simple motor tics

    Directory of Open Access Journals (Sweden)

    Pattamon Panyakaew

    Full Text Available Objective: To demonstrate the usefulness of neurophysiological evaluation to distinguish simple motor tics and functional myoclonus. Methods: Careful clinical assessments, multichannel surface EMG, and EEG-EMG jerk-locked back-averaging were performed. Results: Urge to move and ability to voluntarily suppress the movement were reported. EMG bursts showed variable duration and triphasic pattern of the antagonist muscles mimicking voluntary movements. Only the late component of the Bereitschaftspotential (BP2 was present prior to the involuntary movement onset. Conclusion: Combination of the isolated late BP, premonitory urge, and suppressibility leads to the diagnosis of simple motor tics rather than functional myoclonus. Significance: The physiological approach in addition to careful clinical assessment is helpful to support the diagnosis of tic. Keywords: Simple motor tics, Functional movement disorders, EEG–EMG jerk-locked back-averaging

  2. Simple Screening Methods for Drought and Heat Tolerance in Cowpea

    International Nuclear Information System (INIS)

    Singh, B. B.

    2000-10-01

    Success in breeding for drought tolerance has not been as pronounced as for other traits. This is partly due to lack of simple, cheap and reliable screening methods to select drought tolerant plants/progenies from the segregating populations and partly due to complexity of factors involved in drought tolerance. Measuring drought tolerance through physiological parameters is expensive, time consuming and difficult to use for screening large numbers of lines and segregating populations. Since several factors/mechanisms (in shoot and root) operate independently and/or jointly to enable plants to cope with drought stress, drought tolerance appears as a complex trait. However, if these factors/mechanisms can be separated and studied individually, the components leading to drought tolerance will appear less complex and may be easy to manipulate by breeders. We have developed a simple box screening method for shoot drought tolerance in cowpea, which eliminates the effects of roots and permits non-destructive visual identification of shoot dehydration tolerance. We have also developed a 'root-box pin-board' method to study two dimensional root architecture of individual plants. Using these methods, we have identified two mechanisms of shoot drought tolerance in cowpea which are controlled by single dominant genes and major difference for root architecture among cowpea varieties. Combining deep and dense root system with shoot dehydration tolerance results into highly drought tolerant plants

  3. Draw the Line!

    DEFF Research Database (Denmark)

    Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we...... present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM....... The UPGEM research has previously been published in national reports from each of the partner countries (Denmark, Estonia, Finland, Italy and Poland). In these individual national reports of universities as workplaces for male and female researchers we discuss scientific cultures in physics embedded...

  4. Adaptive method of lines

    CERN Document Server

    Saucez, Ph

    2001-01-01

    The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

  5. CRUCIBLE LINING METHOD

    Science.gov (United States)

    Bone, W.H.; Schmidt, W.W.

    1958-11-01

    A method is presented for forming refractory liners in cylindrical reaction vessels used for the reductlon of uranium tetrafluoride to metallic uranium. A preliminary form, having positioning lugs attached thereto, is inserted into the reaction vessel and the refractory powder, usually CaO, is put in the annular space between the form and the inner wall of the reaction vessel. A jolting table is used to compact this charge of liner material ln place, and after thls has been done, the preliminary form is removed and the flnal form or plug is lnserted without disturbing the partially completed lining. The remainder of the lining charge is then introduced and compacted by jolting, after which the form is removed.

  6. IR finite one-loop box scalar integral with massless internal lines

    International Nuclear Information System (INIS)

    Duplancic, G.; Nizic, B.

    2002-01-01

    The IR finite one-loop box scalar integral with massless internal lines has been recalculated. The result is very compact, simple and valid for arbitrary values of the relevant kinematic variables. It is given in terms of only two dilogarithms and a few logarithms, all of very simple arguments. (orig.)

  7. Simple model of stacking-fault energies

    DEFF Research Database (Denmark)

    Stokbro, Kurt; Jacobsen, Lærke Wedel

    1993-01-01

    A simple model for the energetics of stacking faults in fcc metals is constructed. The model contains third-nearest-neighbor pairwise interactions and a term involving the fourth moment of the electronic density of states. The model is in excellent agreement with recently published local-density ......A simple model for the energetics of stacking faults in fcc metals is constructed. The model contains third-nearest-neighbor pairwise interactions and a term involving the fourth moment of the electronic density of states. The model is in excellent agreement with recently published local...

  8. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    in continuous application. This study looks at the development of a simple, inexpensive chloride electrode, and evaluates its performance under continuous use, both in the laboratory and in a field test in a monitoring well. The results from the study showed a consistent response to changing chloride...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  9. Assessment of daylight quality in simple rooms

    DEFF Research Database (Denmark)

    Johnsen, Kjeld; Dubois, Marie-Claude; Sørensen, Karl Grau

    The present report documents the results of a study on daylight conditions in simple rooms of residential buildings. The overall objective of the study was to develop a basis for a method for the assessment of daylight quality in a room with simple geometry and window configurations. As a tool...... the windows). A number of light indicators allowed understanding and describing the geometry of daylight in the space in a very detailed and thorough manner. The inclusion of the daylight factor, horizontal illuminance, luminance distribution, cylindrical illuminance, the Daylight Glare Index, vertical...

  10. Monosodium glutamate for simple photometric iron analysis

    Science.gov (United States)

    Prasetyo, E.

    2018-01-01

    Simple photometric method for iron analysis using monosodium glutamate (MSG) was proposed. The method could be used as an alternative method, which was technically simple, economic, quantitative, readily available, scientifically sound and environmental friendly. Rapid reaction of iron (III) with glutamate in sodium chloride-hydrochloric acid buffer (pH 2) to form red-brown complex was served as a basis in the photometric determination, which obeyed the range of iron (III) concentration 1.6 – 80 µg/ml. This method could be applied to determine iron concentration in soil with satisfactory results (accuracy and precision) compared to other photometric and atomic absorption spectrometry results.

  11. Remote mechanical C line

    International Nuclear Information System (INIS)

    Nuttall, K.R.; Gardner, P.R.

    1991-01-01

    Westinghouse Hanford Company is developing a desk-top simulation based training program on the operation of the Remote Mechanical C (RMC) Line process in the Plutonium Finishing Plant on the Hanford site, Richland, Washington. Simulations display aod contioually update current values of system parameters on computer graphics of RMC line equipment. Students are able to operate a variety of controllers to maintain proper system status. Programmed faults, selectable by the course instructor, can be used to test student responses to off-normal events. Prior to operation of the simulation, students are given computer-based tutorials on the function, processes, operation, and error conditions associated with individual components. By including the capability of operating each individual component - valves, heaters, agitators, etc. - the computer-based training (CBT) lessons become an interactive training manual. From one perspective RMC represents one step in the diffusion of the well-known and well-documented simulator training activities for nuclear reactor operators to other training programs, equally critical, perhaps, but less well scrutinized in the past. Because of the slowly responding nature of the actual process, RMC can retain many of the capabilities of practice and testing in a simulated work environment while avoiding the cost of a full scale simulator and the exposure and waste developed by practice runs of the RMC line. From another perspective RMC suggests training advances even beyond the most faithful simulators. For example, by integrating CBT lessons with the simulation, RMC permits students to focus in on specific processes occurring inside chosen components. In effect, the interactive training manual is available on-line with the simulation itself. Cost are also discussed

  12. Hydrogen Stark Broadened Brackett lines

    Directory of Open Access Journals (Sweden)

    C. Stehlé

    2010-01-01

    Full Text Available Stark-broadened lines of the hydrogen Brackett series are computed for the conditions of stellar atmospheres and circumstellar envelopes. The computation is performed within the Model Microfield Method, which includes the ion dynamic effects and makes the bridge between the impact limit at low density and the static limit at high density and in the line wings. The computation gives the area normalized line shape, from the line core up to the static line wings.

  13. Line managers as marketers.

    Science.gov (United States)

    Rynne, T J

    1986-09-01

    Many hospital administrators and boards of directors, having overcome their initial opposition to advertising and hired a marketing professional, are wondering why their marketing programs have not accomplished all that they had hoped. The answer lies in their perception of who is responsible for marketing. Marketing is not a specialty separate from the disciplines of management--it is a basic management skill. Its goal is to satisfy the customer by providing products and services that meet the customer's needs, wants, and preferences. Line managers must understand the hospital's customers and make the critical day-to-day differences in satisfying them. They are the hospital's front-line marketers, and the marketing department's role is to support them in this function. The marketing department should develop the line managers' marketing skills by furnishing them with the appropriate tools: formats, models, examples, and instructions. In addition, the marketing staff should provide such specialized services as marketing research, ad agency management, and development of communications.

  14. A simple multistage closed-(box+reservoir model of chemical evolution

    Directory of Open Access Journals (Sweden)

    Caimmi R.

    2011-01-01

    Full Text Available Simple closed-box (CB models of chemical evolution are extended on two respects, namely (i simple closed-(box+reservoir (CBR models allowing gas outflow from the box into the reservoir (Hartwick 1976 or gas inflow into the box from the reservoir (Caimmi 2007 with rate proportional to the star formation rate, and (ii simple multistage closed-(box+reservoir (MCBR models allowing different stages of evolution characterized by different inflow or outflow rates. The theoretical differential oxygen abundance distribution (TDOD predicted by the model maintains close to a continuous broken straight line. An application is made where a fictitious sample is built up from two distinct samples of halo stars and taken as representative of the inner Galactic halo. The related empirical differential oxygen abundance distribution (EDOD is represented, to an acceptable extent, as a continuous broken line for two viable [O/H]-[Fe/H] empirical relations. The slopes and the intercepts of the regression lines are determined, and then used as input parameters to MCBR models. Within the errors (-+σ, regression line slopes correspond to a large inflow during the earlier stage of evolution and to low or moderate outflow during the subsequent stages. A possible inner halo - outer (metal-poor bulge connection is also briefly discussed. Quantitative results cannot be considered for applications to the inner Galactic halo, unless selection effects and disk contamination are removed from halo samples, and discrepancies between different oxygen abundance determination methods are explained.

  15. Figuring the Acceleration of the Simple Pendulum

    Science.gov (United States)

    Lieberherr, Martin

    2011-01-01

    The centripetal acceleration has been known since Huygens' (1659) and Newton's (1684) time. The physics to calculate the acceleration of a simple pendulum has been around for more than 300 years, and a fairly complete treatise has been given by C. Schwarz in this journal. But sentences like "the acceleration is always directed towards the…

  16. A simple method for complex eigenvalues

    Energy Technology Data Exchange (ETDEWEB)

    Killingbeck, John P [Mathematics Department, University of Hull, Hull HU6 7RX (United Kingdom); Grosjean, Alain [Laboratoire d' Astrophysique de l' Observatoire de Besancon, CNRS, UMR 6091, 41 bis Avenue de l' Observatoire, BP1615, 25010 Besancon Cedex (France); Jolicard, Georges [Laboratoire d' Astrophysique de l' Observatoire de Besancon, CNRS, UMR 6091, 41 bis Avenue de l' Observatoire, BP1615, 25010 Besancon Cedex (France)

    2004-11-05

    A simple iterative method is described for finding the eigenvalues of a general square complex matrix. Several numerical examples involving complex symmetric matrices are treated. In particular, it is found that a naive matrix calculation without complex rotation produces resonant state energies in accord with those given by the recently introduced naive complex hypervirial perturbation theory. (letter to the editor)

  17. Modelling of the simple pendulum Experiment

    Directory of Open Access Journals (Sweden)

    Palka L.

    2016-01-01

    Full Text Available Abstract - work focuses on the design of the simulation embedded in remote experiment “Simple pendulum” built on the Internet School Experimental System (ISES. This platform is intended for wide educational purposes at schools and universities in order to provide the suitable measuring environment for students using conventional computing resources Informatics.

  18. LIQUEN SIMPLE CRÓNICO VULVAR UNILATERAL

    OpenAIRE

    Lema C,Rodrigo; Ricci A,Paolo; Solà D,Vicente; Contreras M,Luis

    2006-01-01

    Presentamos un caso de liquen simple crónico vulvar izquierdo, en una paciente con diagnóstico psiquiátrico de trastorno bipolar, tratado repetidamente como micosis. Se realizó biopsia que confirmó el diagnóstico y se trató exitosamente con antihistamínicos orales y corticoides tópicos

  19. Simple classical approach to spin resonance phenomena

    DEFF Research Database (Denmark)

    Gordon, R A

    1977-01-01

    A simple classical method of describing spin resonance in terms of the average power absorbed by a spin system is discussed. The method has several advantages over more conventional treatments, and a number of important spin resonance phenomena, not normally considered at the introductory level...

  20. Geometric classification of simple graph algebras

    DEFF Research Database (Denmark)

    Sørensen, Adam Peder Wie

    2013-01-01

    Inspired by Franks’ classification of irreducible shifts of finite type, we provide a short list of allowed moves on graphs that preserve the stable isomorphism class of the associated C ∗ -algebras. We show that if two graphs have stably isomorphic and simple unital algebras then we can use...

  1. A Simple Model of Self-Assessments

    NARCIS (Netherlands)

    S. Dominguez Martinez (Silvia); O.H. Swank (Otto)

    2006-01-01

    textabstractWe develop a simple model that describes individuals' self-assessments of their abilities. We assume that individuals learn about their abilities from appraisals of others and experience. Our model predicts that if communication is imperfect, then (i) appraisals of others tend to be too

  2. A simple model of self-assessment

    NARCIS (Netherlands)

    Dominguez-Martinez, S.; Swank, O.H.

    2009-01-01

    We develop a simple model that describes individuals' self-assessments of their abilities. We assume that individuals learn about their abilities from appraisals of others and experience. Our model predicts that if communication is imperfect, then (i) appraisals of others tend to be too positive and

  3. Simple picture of the annihilation process

    International Nuclear Information System (INIS)

    Gotsman, E.; Nussinov, S.

    1980-01-01

    We propose a simple geometrical picture for B-barB annihilations, which is motivated by the electric-flux-tube model and is consistent with the quark-rearrangement model, as well as the nonplanar multiperipheral quark-exchange model. Within its framework we are able to explain all the salient features of the experimental annihilation data

  4. Most pressurized elements are not simple cubic

    Czech Academy of Sciences Publication Activity Database

    Legut, Dominik; Friák, Martin; Šob, Mojmír

    2008-01-01

    Roč. 61, č. 9 (2008), s. 10-11 ISSN 0031-9228 R&D Projects: GA MŠk OC 147; GA AV ČR IAA1041302 Institutional research plan: CEZ:AV0Z20410507 Keywords : electronic structure * simple cubic structure * phase transformations Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.674, year: 2008

  5. A SIMPLE SPECTROPHOTOMETRIC DETERMINATION OF TRACE ...

    African Journals Online (AJOL)

    A simple and sensitive spectrophotometric method has been developed for the determination of trace amounts of vanadium using thionin as a chromogenic reagent. The proposed method is based on the reaction of vanadium(V) with potassium iodide in acid medium to liberate iodine, which bleaches the violet colour of ...

  6. Simple Cloud Chambers Using Gel Ice Packs

    Science.gov (United States)

    Kamata, Masahiro; Kubota, Miki

    2012-01-01

    Although cloud chambers are highly regarded as teaching aids for radiation education, school teachers have difficulty in using cloud chambers because they have to prepare dry ice or liquid nitrogen before the experiment. We developed a very simple and inexpensive cloud chamber that uses the contents of gel ice packs which can substitute for dry…

  7. A Study of Simple Diffraction Models

    DEFF Research Database (Denmark)

    Agerkvist, Finn

    In this paper two simple methods for cabinet edge diffraction are examined. Calculations with both models are compared with more sophisticated theoretical models and with measured data. The parameters involved are studied and their importance for normal loudspeaker box designs is examined....

  8. Simple parametrization of nucleon form factors

    International Nuclear Information System (INIS)

    Kelly, J.J.

    2004-01-01

    This Brief Report provides simple parametrizations of the nucleon electromagnetic form factors using functions of Q 2 that are consistent with dimensional scaling at high Q 2 . Good fits require only four parameters each for G Ep , G Mp , and G Mn and only two for G En

  9. From Complex to Simple: Interdisciplinary Stochastic Models

    Science.gov (United States)

    Mazilu, D. A.; Zamora, G.; Mazilu, I.

    2012-01-01

    We present two simple, one-dimensional, stochastic models that lead to a qualitative understanding of very complex systems from biology, nanoscience and social sciences. The first model explains the complicated dynamics of microtubules, stochastic cellular highways. Using the theory of random walks in one dimension, we find analytical expressions…

  10. A simple dead-reckoning navigational system

    Science.gov (United States)

    Walls, B. F.; Mastin, W. C.; Broussard, P., Jr.

    1972-01-01

    Simple navigation system is designed for vehicles operating in remote locations where it is not feasible to transport extensive equipment. System consists of four main components: directional gyrocompass to establish inertial direction; odometer to measure distance; signal processor to combine measured distance and direction; and sun compass to determine initial direction.

  11. Using Simple Machines to Leverage Learning

    Science.gov (United States)

    Dotger, Sharon

    2008-01-01

    What would your students say if you told them they could lift you off the ground using a block and a board? Using a simple machine, they'll find out they can, and they'll learn about work, energy, and motion in the process! In addition, this integrated lesson gives students the opportunity to investigate variables while practicing measurement…

  12. A Simple View of Writing in Chinese

    Science.gov (United States)

    Yeung, Pui-sze; Ho, Connie Suk-han; Chan, David Wai-ock; Chung, Kevin Kien-hoa

    2017-01-01

    This study examined the Chinese written composition development of elementary-grade students in relation to the simple view of writing. Measures of nonverbal reasoning ability, component skills of transcription (stroke sequence knowledge, word spelling, and handwriting fluency), oral language (definitional skill, oral narrative skills, and…

  13. Low Cost, Simple, Intrauterine Insemination Procedure with ...

    African Journals Online (AJOL)

    During the last 30 years however, intrauterine insemination has evolved with the introduction of ovulation stimulating protocols and sperm preparation methods taken from assisted reproduction techniques. Costs have risen, but the success rate has not risen to the same extent. We have therefore developed a quite simple ...

  14. Simple inorganic complexes but intricate hydrogen bonding ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 121; Issue 2. Simple inorganic complexes but intricate hydrogen bonding networks: Synthesis and crystal structures of [MII(opda)2(NO3)2] (M = Zn and Cd; opda = orthophenylenediamine). Sabbani Supriya. Full Papers Volume 121 Issue 2 March 2009 pp 137-143 ...

  15. Special Relativity as a Simple Geometry Problem

    Science.gov (United States)

    de Abreu, Rodrigo; Guerra, Vasco

    2009-01-01

    The null result of the Michelson-Morley experiment and the constancy of the one-way speed of light in the "rest system" are used to formulate a simple problem, to be solved by elementary geometry techniques using a pair of compasses and non-graduated rulers. The solution consists of a drawing allowing a direct visualization of all the fundamental…

  16. Teaching Alveolar Ventilation with Simple, Inexpensive Models

    Science.gov (United States)

    DiCarlo, Stephen E.

    2008-01-01

    When teaching and learning about alveolar ventilation with our class of 300 first-year medical students, we use four simple, inexpensive "models." The models, which encourage research-oriented learning and help our students to understand complex ideas, are distributed to the students before class. The students anticipate something new every day,…

  17. A simple and inexpensive fish tagging method

    OpenAIRE

    Ofori, J.K.; Attipoe, F.Y.; Abban, E.K.

    1999-01-01

    In many developing countries, availability of suitable tags for use in genetics and aquaculture research has been a problem as they are often expensive and have to be imported from other countries. A simple and inexpensive method used by scientists in Ghana that can be tried and improved by others is described in this article.

  18. A simple design rule for overlap joints

    NARCIS (Netherlands)

    Straalen, IJ.J. van

    2004-01-01

    For toughened and flexible adhesives it is found that a simple prediction model for overlap joints can be used to calculate the ultimate strength for the static load case. The absolute maximum strength for a lap joint is when the whole of the adhesive layer is at the shear yield strength. An

  19. Abundance, composition and distribution of simple sequence ...

    Indian Academy of Sciences (India)

    numbers AF369029, AF332093, AF440570) were down- loaded from GenBank. The sizes of these genomes are. 292,967 bp ... determined. Keywords. shrimp; white spot syndrome virus (WSSV); simple sequence repeats (SSRs); compositional bias; genetic distance. Journal of Genetics, Vol. 86, No. 1, April 2007. 69 ...

  20. Air: Simple Experiments for Young Scientists.

    Science.gov (United States)

    White, Larry

    This book contains simple experiments through which students explore air and its properties. Some of the topics discussed include alternative energy, bacteria, carbon dioxide, motion, weather, and flight. Experiments include: blowing a balloon up in a bottle; seeing air in water; making a lunch-bag kite, weather vanes, and paper glider;…

  1. Strong Bisimilarity of Simple Process Algebras

    DEFF Research Database (Denmark)

    Srba, Jirí

    2003-01-01

    We study bisimilarity and regularity problems of simple process algebras. In particular, we show PSPACE-hardness of the following problems: (i) strong bisimilarity of Basic Parallel Processes (BPP), (ii) strong bisimilarity of Basic Process Algebra (BPA), (iii) strong regularity of BPP, and (iv) ...

  2. Simple algebraic data types for C

    NARCIS (Netherlands)

    Hartel, Pieter H.; Muller, Henk L.

    Adt is a simple tool in the spirit of Lex and Yacc that makes monomorphic algebraic data types, polymorphic built-in types like the list and an efficient form of pattern matching available in C programs. C programs built with ADTs typically use NULL pointers only to indicate don't care values, and

  3. Making Simple Folk Instruments for Children.

    Science.gov (United States)

    Cline, Dallas

    1980-01-01

    Instructions are provided for making these simple musical instruments from inexpensive materials: an Indian bull-roarer; bottle chimes; a ham can guitar; flower pot, box, and steel drums; a xylophone; a musical sawhorse; rattles; a melody box; and a box thumb harp. (SJL)

  4. Simple concurrent garbage collection almost without synchronization

    NARCIS (Netherlands)

    Hesselink, Wim H.; Lali, M.I.

    We present two simple mark and sweep algorithms, A and B, for concurrent garbage collection by a single collector running concurrently with a number of mutators that concurrently modify shared data. Both algorithms are based on the ideas of Ben-Ari's classical algorithm for on-the-fly garbage

  5. Nature versus Nurture: The Simple Contrast

    Science.gov (United States)

    Davidoff, Jules; Goldstein, Julie; Roberson, Debi

    2009-01-01

    We respond to the commentary of Franklin, Wright, and Davies ("Journal of Experimental Child Psychology, 102", 239-245 [2009]) by returning to the simple contrast between nature and nurture. We find no evidence from the toddler data that makes us revise our ideas that color categories are learned and never innate. (Contains 1 figure.)

  6. Variations on a Simple Dice Game

    Science.gov (United States)

    Heafner, Joe

    2018-01-01

    I begin my introductory astronomy course with a unit on critical thinking that focuses on, among other things, the differences between the "scientific method" as frequently presented in textbooks and actual scientific practice. One particular classroom activity uses a simple dice game to simulate observation of a natural phenomenon and…

  7. A Simple Sketch Symbolizing Self-Reliance

    Centers for Disease Control (CDC) Podcasts

    2017-02-16

    EID Managing Editor, Byron Breedlove, reads his cover art story, A Simple Sketch Symbolizing Self-Reliance.  Created: 2/16/2017 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 2/16/2017.

  8. Simple Numerical Simulation of Strain Measurement

    Science.gov (United States)

    Tai, H.

    2002-01-01

    By adopting the basic principle of the reflection (and transmission) of a plane polarized electromagnetic wave incident normal to a stack of films of alternating refractive index, a simple numerical code was written to simulate the maximum reflectivity (transmittivity) of a fiber optic Bragg grating corresponding to various non-uniform strain conditions including photo-elastic effect in certain cases.

  9. Simple sequence repeats in mycobacterial genomes

    Indian Academy of Sciences (India)

    Prakash

    J. Biosci. 32(1), January 2007. The list of microsatellite rich as well as poor regions in the five mycobacterial genomes. Local GC%. Repeat rich(+)/. Repeat poor(-). Total ORFs. Number of ... Simple sequence repeats in mycobacterial genomes. VATTIPALLY .... heat shock protein (grpE) (15839737), heat shock protein (dnaJ) ...

  10. Fourier Spectroscopy: A Simple Analysis Technique

    Science.gov (United States)

    Oelfke, William C.

    1975-01-01

    Presents a simple method of analysis in which the student can integrate, point by point, any interferogram to obtain its Fourier transform. The manual technique requires no special equipment and is based on relationships that most undergraduate physics students can derive from the Fourier integral equations. (Author/MLH)

  11. Microwave Radiometer Linearity Measured by Simple Means

    DEFF Research Database (Denmark)

    Skou, Niels

    2002-01-01

    Modern spaceborne radiometer systems feature an almost perfect on-board calibration, hence the primary calibration task to be carried out before launch is a check of radiometer linearity. This paper describes two ways of measuring linearity of microwave radiometers only requiring relatively simple...

  12. Studying the Greenhouse Effect: A Simple Demonstration.

    Science.gov (United States)

    Papageorgiou, G.; Ouzounis, K.

    2000-01-01

    Studies the parameters involved in a presentation of the greenhouse effect and describes a simple demonstration of this effect. Required equipment includes a 100-120 watt lamp, a 250mL beaker, and a thermometer capable of recording 0-750 degrees Celsius together with a small amount of chloroform. (Author/SAH)

  13. A simple urine test for sulfonamides

    Science.gov (United States)

    de Almeida-Filho, Juvenal; de Souza, José Maria

    1983-01-01

    The lack of a simple and reliable test for sulfonamides has created a problem because of the increasing use of these drugs in the chemotherapy of malaria. This paper describes a modification of the Bratton-Marshall technique, for which the reagents are easily obtainable and which can be carried out in simply equipped primary health care laboratories. PMID:6601540

  14. A simple urine test for sulfonamides

    OpenAIRE

    de Almeida-Filho, Juvenal; de Souza, José Maria

    1983-01-01

    The lack of a simple and reliable test for sulfonamides has created a problem because of the increasing use of these drugs in the chemotherapy of malaria. This paper describes a modification of the Bratton-Marshall technique, for which the reagents are easily obtainable and which can be carried out in simply equipped primary health care laboratories.

  15. Simple Numerical Model of Laminated Glass Beams

    Directory of Open Access Journals (Sweden)

    A. Zemanová

    2008-01-01

    Full Text Available This paper presents a simple Finite Element model aimed at efficient simulation of layered glass units. The approach is based on considering the independent kinematics of each layer, tied together via Lagrange multipliers. Validation and verification of the resulting model against independent data demonstrate its accuracy, showing its potential for generalization towards more complex problems. 

  16. Simple luminosity normalization of greenness, yellowness and ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Biosciences; Volume 37; Issue 4. Simple luminosity normalization of greenness, yellowness and redness/greenness for comparison of leaf spectral profiles in multi-temporally acquired remote sensing images. Ryoichi Doi. Articles Volume 37 Issue 4 September 2012 pp 723-730 ...

  17. Energy: Simple Experiments for Young Scientists.

    Science.gov (United States)

    White, Larry

    This book contains simple experiments through which students can learn about the properties of energy. These experiments include making a kitchen "volcano," a soda-pop "cannon," and a puffed-rice "scooter." Topics include: energy and work, fossil fuels, solar energy, kinetic energy, potential energy, mechanical energy, heat energy, sound energy,…

  18. A Simple and Efficient Kinetic Spanner

    DEFF Research Database (Denmark)

    Abam, Mohammad; de Berg, Mark; Gudmundsson, Joachim

    2008-01-01

    We present a new and simple (1+ε)-spanner of size O(nε2) for a set of n points in the plane, which can be maintained efficiently as the points move. Assuming the trajectories of the points can be described by polynomials whose degrees are at most s, the number of topological changes to the spanner...

  19. Seismic Safety Of Simple Masonry Buildings

    International Nuclear Information System (INIS)

    Guadagnuolo, Mariateresa; Faella, Giuseppe

    2008-01-01

    Several masonry buildings comply with the rules for simple buildings provided by seismic codes. For these buildings explicit safety verifications are not compulsory if specific code rules are fulfilled. In fact it is assumed that their fulfilment ensures a suitable seismic behaviour of buildings and thus adequate safety under earthquakes. Italian and European seismic codes differ in the requirements for simple masonry buildings, mostly concerning the building typology, the building geometry and the acceleration at site. Obviously, a wide percentage of buildings assumed simple by codes should satisfy the numerical safety verification, so that no confusion and uncertainty have to be given rise to designers who must use the codes. This paper aims at evaluating the seismic response of some simple unreinforced masonry buildings that comply with the provisions of the new Italian seismic code. Two-story buildings, having different geometry, are analysed and results from nonlinear static analyses performed by varying the acceleration at site are presented and discussed. Indications on the congruence between code rules and results of numerical analyses performed according to the code itself are supplied and, in this context, the obtained result can provide a contribution for improving the seismic code requirements

  20. Simple atoms: QED tests and fundamental constants

    International Nuclear Information System (INIS)

    Karshenboim, S.G.

    2002-01-01

    Full text: Study of simple atoms can be performed theoretically and experimentally with a high accuracy and a comparison of theory and experiment provide us with several high precision tests of bound state QED. Theory cannot actually leads to a figure to compare with experiment, but it only can present some measurable quantities in terms of fundamental and auxiliary constants. That offers an opportunity to obtain new accurate values of some fundamental constants. Theory of simple atoms is based on Quantum electrodynamics but also involves an essential part of nuclear and particle physics. A significant part of experiments are related to high-resolution laser spectroscopy. Present status of the precision physics of simple atoms is presented in detail. We overview a comparison of the theory of such atoms, bound state QED, and the experiment. In particular, we consider the hyperfine structure in light atoms and the g-factor of a bound electron in hydrogen-like ions at low and medium Z. We discuss a project on optical measurement of of 2s hyperfine interval in atomic hydrogen. We also pay attention to determination of the fundamental constants from study of simple atoms. The constants under consideration includes alpha, electron-to-proton mass ratio and electron-to-muon mass ratio

  1. Simple Obstacle Avoidance Algorithm for Rehabilitation Robots

    NARCIS (Netherlands)

    Stuyt, Floran H.A.; Römer, GertWillem R.B.E.; Stuyt, Harry .J.A.

    2007-01-01

    The efficiency of a rehabilitation robot is improved by offering record-and-replay to operate the robot. While automatically moving to a stored target (replay) collisions of the robot with obstacles in its work space must be avoided. A simple, though effective, generic and deterministic algorithm

  2. A simple model for indentation creep

    Science.gov (United States)

    Ginder, Ryan S.; Nix, William D.; Pharr, George M.

    2018-03-01

    A simple model for indentation creep is developed that allows one to directly convert creep parameters measured in indentation tests to those observed in uniaxial tests through simple closed-form relationships. The model is based on the expansion of a spherical cavity in a power law creeping material modified to account for indentation loading in a manner similar to that developed by Johnson for elastic-plastic indentation (Johnson, 1970). Although only approximate in nature, the simple mathematical form of the new model makes it useful for general estimation purposes or in the development of other deformation models in which a simple closed-form expression for the indentation creep rate is desirable. Comparison to a more rigorous analysis which uses finite element simulation for numerical evaluation shows that the new model predicts uniaxial creep rates within a factor of 2.5, and usually much better than this, for materials creeping with stress exponents in the range 1 ≤ n ≤ 7. The predictive capabilities of the model are evaluated by comparing it to the more rigorous analysis and several sets of experimental data in which both the indentation and uniaxial creep behavior have been measured independently.

  3. Lumbar Puncture for First Simple Febrile Seizure

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2009-01-01

    Full Text Available Compliance with American Academy of Pediatrics consensus statement recommendations regarding lumbar puncture for infants 6-18 months of age with a first simple febrile seizure was investigated by a retrospective review of 704 infants evaluated in the pediatric emergency medicine division at Children’s Hospital Boston, MA, Oct 1995-Oct 2006.

  4. Simple Calculation Programs for Biology Other Methods

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Simple Calculation Programs for Biology Other Methods. Hemolytic potency of drugs. Raghava et al., (1994) Biotechniques 17: 1148. FPMAP: methods for classification and identification of microorganisms 16SrRNA. graphical display of restriction and fragment map of ...

  5. Simple Calculation Programs for Biology Immunological Methods

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Simple Calculation Programs for Biology Immunological Methods. Computation of Ab/Ag Concentration from EISA data. Graphical Method; Raghava et al., 1992, J. Immuno. Methods 153: 263. Determination of affinity of Monoclonal Antibody. Using non-competitive ...

  6. Simple Activity Demonstrates Wind Energy Principles

    Science.gov (United States)

    Roman, Harry T.

    2012-01-01

    Wind energy is an exciting and clean energy option often described as the fastest-growing energy system on the planet. With some simple materials, teachers can easily demonstrate its key principles in their classroom. (Contains 1 figure and 2 tables.)

  7. Inversion of e-simple Block Matrices

    Czech Academy of Sciences Publication Activity Database

    Fiedler, Miroslav

    2005-01-01

    Roč. 400, - (2005), s. 231-241 ISSN 0024-3795 R&D Projects: GA AV ČR IAA1030302 Institutional research plan: CEZ:AV0Z10300504 Keywords : matrix inversion * M-matrix * unipathic graph * e-simple graph Subject RIV: BA - General Mathematics Impact factor: 0.590, year: 2005

  8. A simple model for 100 K-year oscillations in glaciation

    Science.gov (United States)

    Lindzen, R. S.

    1986-01-01

    A simple climatic model which produces glaciation cycles of 100 K periods in response to forcing by 20 K, 40 K, and 100 K periods is described. The model is based on Milankovitch's (1930) hypothesis that glaciation fluctuations are forced by orbital variation and the associated change in insolation. The sea ice/snow cover line for the model, and the relation between heat variations and the ice/snow line are analyzed. The sea ice/snow cover line for the model is between the pole and 53 deg latitude and the line's position is the forcing for the glaciation cycle. Examples of the model's response to forcing are presented and evaluated. The negative glaciation permitted by the model is studied. The role of CO2 feedback in the glaciation cycle is investigated.

  9. Spin Seebeck effect in a simple ferromagnet near T c: a Ginzburg–Landau approach

    Science.gov (United States)

    Adachi, Hiroto; Yamamoto, Yutaka; Ichioka, Masanori

    2018-04-01

    A time-dependent Ginzburg–Landau theory is used to examine the longitudinal spin Seebeck effect in a simple ferromagnet in the vicinity of the Curie temperature T c. It is shown analytically that the spin Seebeck effect is proportional to the magnetization near T c, whose result is in line with the previous numerical finding. It is argued that the present result can be tested experimentally using a simple magnetic system such as EuO/Pt or EuS/Pt.

  10. Design, construction and commissioning of a simple, low cost permanent magnet quadrupole doublet

    International Nuclear Information System (INIS)

    Conard, E.M.; Parcell, S.K.; Arnott, D.W.

    1999-01-01

    In the framework of new beam line developments at the Australian National Medical Cyclotron, a permanent magnet quadrupole doublet was designed and built entirely in house. The design proceeded from the classical work by Halbach et al. but emphasised the 'low cost' aspect by using simple rectangular NdFeB blocks and simple assembly techniques. Numerical simulations using the (2-D) Gemini code were performed to check the field strength and homogeneity predictions of analytical calculations. This paper gives the reasons for the selection of a permanent magnet, the design and construction details of the quadrupole doublet and its field measurement results. (authors)

  11. Gadolinium-153 line sources

    Energy Technology Data Exchange (ETDEWEB)

    Lebedev, V.M. E-mail: kar@orip.niiar.simbirsk.su; Gordeev, J.N.; Karelin, E.A.; Gavrilov, V.D

    2000-11-15

    The technology for Gd-153 line source production has been developed at SSC RIAR. The source active core is made of Al-Gd{sub 2}O{sub 3} composition by means of one of the following ways: either collecting pressed pellets or filling the source body with the composition followed by sintering. The composition is prepared by gadolinium salt thermal destruction on aluminium particles. The method allows setting gadolinium mass fraction (from 0.02 to 6%) with high accuracy and uniformity of distribution in the composition volume of more than 95%.

  12. α-line systematics

    International Nuclear Information System (INIS)

    Caurier, E.; Zuker, A.P.

    1991-01-01

    A study of the α-line, defined as a set of differences (D α ) characterized binding energies of (N,Z) nuclei, is presented. The 2p2n-separation energies for even-even nuclei, odd-odd nuclei, even(Z)-odd(N) nuclei, odd(Z)-even(N) nuclei are presented. Trends and details in even-even nuclei, magic numbers of even-even and odd-odd nuclei are discussed. (G.P.) 1 ref.; 8 figs

  13. America's Assembly Line

    DEFF Research Database (Denmark)

    Nye, David Edwin

    A social history of the assembly line, invented in 1913. Both praised as a boon to consumers and as a curse for workers, it has been satirized, imitated, and celebrated for 100 years. It has inspired fiction, comedy, cafeteria layouts, and suburban housing. It transformed industrial labor...... and provoked strikes and union drives in the 1930s, but became a symbol of victory in the Second World War and Cold War. Reinvented by Japan as "lean production" and then increasingly automated after 1990, it remains a cornerstone of production but no longer employs many workers, even as it evolves toward...

  14. Worldlines as Wilson Lines

    Energy Technology Data Exchange (ETDEWEB)

    Green, Daniel; /SLAC /Stanford U., Dept. Phys.

    2008-04-29

    Gravitational theories do not admit gauge invariant local operators. We study the limits under which there exists a quasi-local description for a class of non-local gravitational observables where a sum over worldlines plays the role of the Wilson line for gauge theory observables. We study non-local corrections to the local description and circumstances where these corrections become large. We find that these operators are quasi-local in at space and AdS, but fail to be quasi-local in de Sitter space.

  15. Coaxial transmission line - Equalization

    International Nuclear Information System (INIS)

    Bonnerue, J.L.; Fremont, Jacques; Haubtmann, Jack; Pillon, Gerard.

    1981-09-01

    The transmission of electrical signal through a coaxial line is not perfect and signal distortions are increased as much as the frequency spectrum is extended. We have designed and achieved passive filters (named equalizers) with transfer functions which are inverse of coaxial transfer functions. Doing so our attempt is to avoid definitive loss of information in the recorded data. The main feature of our equalization method lies in the fact it could be either an electrical or a numerical correction or both of them. Some examples in the use of this technique are also proposed [fr

  16. Antegrade-retrograde opposing lag screws for internal fixation of simple displaced talar neck fractures.

    Science.gov (United States)

    Abdelkafy, Ashraf; Imam, Mohamed Abdelnabi; Sokkar, Sherif; Hirschmann, Michael

    2015-01-01

    The talar neck is deviated medially with reference to the long axis of the body of the talus. In addition, it deviates plantarward. The talar neck fracture line is sometimes observed to be oriented obliquely (not perpendicular to the long axis of the talar neck). This occurs when the medially deviated talar neck strikes the horizontally oriented anterior lower tibial edge. Internal fixation of a simple displaced talar neck fracture usually requires 2 lag screws. Because the fracture line is obliquely oriented, a better method for positioning the screws perpendicular to the fracture line is to place them in a reversed direction to provide maximum interfragmentary compression at the fracture site, which could increase the likelihood of absolute stability with subsequent improvement in the incidence of fracture union and a reduction of complications, such as avascular necrosis of the body of the talus. Two lag screws are used, with the first inserted from posteriorly to anteriorly (perpendicular to the fracture line) using a medial approach after medial malleolar chevron osteotomy. The second screw is inserted from anteriorly to posteriorly (perpendicular to the fracture line) using an anterolateral approach. Both screw heads should be countersunk. A series of 8 patients underwent this form of internal fixation for talar neck fracture repair, with satisfactory functional outcomes. In conclusion, the use of antegrade-retrograde opposing lag screws is a reasonable method of internal fixation for simple displaced talar neck fractures. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  17. From Off-line to On-line Handwriting Recognition

    NARCIS (Netherlands)

    Lallican, P.; Viard-Gaudin, C.; Knerr, S.

    2004-01-01

    On-line handwriting includes more information on time order of the writing signal and on the dynamics of the writing process than off-line handwriting. Therefore, on-line recognition systems achieve higher recognition rates. This can be concluded from results reported in the literature, and has been

  18. Simple method of measuring laser peak intensity inside femtosecond laser filament in air.

    Science.gov (United States)

    Xu, Shengqi; Sun, Xiaodong; Zeng, Bin; Chu, Wei; Zhao, Jiayu; Liu, Weiwei; Cheng, Ya; Xu, Zhizhan; Chin, See Leang

    2012-01-02

    Measurement of laser intensity inside a femtosecond laser filament is a challenging task. In this work, we suggest a simple way to characterize laser peak intensity inside the filament in air. It is based on the signal ratio measurement of two nitrogen fluorescence lines, namely, 391 nm and 337 nm. Because of distinct excitation mechanisms, the signals of the two fluorescence lines increase with the laser intensity at different orders of nonlinearity. An empirical formula has been deduced according to which laser peak intensity could be simply determined by the fluorescence ratio.

  19. The value of Tuffier's line for neonatal neuraxial procedures.

    Science.gov (United States)

    van Schoor, A; Bosman, M C; Bosenberg, A T

    2014-04-01

    The spine of L4 usually lies on a line drawn between the highest points of the iliac crests (Tuffier's line) in adults. Although its accuracy has been questioned, it is still commonly used to identify the spinous process of the 4th lumbar vertebra before performing lumbar neuraxial procedures. In children, this line is said to cross the midline at the level of L5. A literature search revealed that the description this surface anatomical line is vague in neonates. The aims of this study were to determine the vertebral level of Tuffier's line, as well as its distance from the apex of the sacrococcygeal membrane (ASM), in 39 neonatal cadavers in both a prone and flexed position. It was found that when flexed, Tuffier's line shifted from the level of L4/L5 (prone position) to the upper third of L5. The mean distance from the ASM to Tuffier's line was 23.64mm when prone and 25.47 mm when flexed, constituting a statistically significant increase in the distance (P=0.0061). Therefore, in the absence of advanced imaging modalities, Tuffier's line provides practitioners with a simple method of determining a level caudal to the termination of the spinal cord, at approximately the L4/L5 in a prone neonate and the upper margins of L5 when flexed. Copyright © 2013 Wiley Periodicals, Inc.

  20. Strategic production line synchronisation

    Directory of Open Access Journals (Sweden)

    Hattingh, Teresa

    2016-08-01

    Full Text Available A study was conducted at the sole global producer of suspension struts for a particular vehicle manufacturer. This supplier is currently able to meet customer demand. However, it does so because of a large finished goods and work-in-progress (WIP inventory. The plant operates two production processes that are separated by a large buffer of WIP, which essentially decouples the production processes. This study aimed to reduce this WIP buffer; this would require the processes to become synchronised, bearing in mind that the reliability of delivery should not decrease. A tool that considers time, quality, and machine capacity was developed to assess the impact of line synchronisation on company performance figures. It was found that line synchronisation produced several benefits for the supplier, including batch size reduction, lower inventory levels, and associated shorter lead times. This further allowed the supplier to improve flow in the plant by introducing a pull system. Improved visual oversight could lead to further improved problem-solving and innovation.

  1. An improved rolled strip pulse forming line.

    Science.gov (United States)

    Li, Song; Qian, Bao-Liang; Yang, Han-Wu; Gao, Jing-Ming; Liu, Zhao-Xi

    2013-06-01

    The rolled strip pulse forming line (RSPFL) has advantages of compactness, portability, and long pulse achievability which could well meet the requirements of industrial application of the pulse power technology. In this paper, an improved RSPFL with an additional insulator between the grounded conductors is investigated numerically and experimentally. Results demonstrate that the jitter on the flat-top of the output voltage waveform is reduced to 3.8% due to the improved structure. Theoretical analysis shows that the electromagnetic coupling between the conductors of the RSPFL strongly influences the output voltage waveform. Therefore, the new structure was designed to minimize the detrimental effect of the electromagnetic coupling. Simulation results show that the electromagnetic coupling can be efficiently reduced in the improved RSPFL. Experimental results illustrate that the improved RSPFL, with dimensions and weight of Φ 290 × 250 mm and 16 kg, when used as a simple pulse forming line, could generate a well shaped quasi-square pulse with output power of hundreds of MW and pulse duration of 250 ns. Importantly, the improved RSPFL was successfully used as a Blumlein pulse forming line, and a 10.8 kV, 260 ns quasi-square pulse was obtained on a 2 Ω dummy load. Experiments show reasonable agreement with numerical analysis.

  2. Contact lines on silicone elastomers promote contamination

    Science.gov (United States)

    Hourlier-Fargette, Aurelie; Antkowiak, Arnaud; Neukirch, Sebastien

    2017-11-01

    Silicone elastomers are used in contact with aqueous liquids in a large range of applications. Due to numerous advantages such as its flexibility, optical transparency, or gas permeability, polydimethylsiloxane is widely spread in rapid prototyping for microfluidics or elastocapillarity experiments. However, silicone elastomers are known to contain a small fraction of uncrosslinked low-molecular-weight oligomers, the effects of which are not completely understood. We show that in various setups involving an air-water-silicone elastomer contact line, a capillarity-induced extraction of uncrosslinked oligomers occurs, leading to a contamination of water-air interfaces. We investigate the case of a static air-water-PDMS contact line, before focusing on moving contact lines. A water droplet sliding down on a PDMS inclined plane or an air bubble rising on an immersed PDMS plane exhibits two successive speed regimes: the second regime is reached only when a monolayer of oligomers completely covers the water-air interface. These experiments involve processes occurring at the polymer network scale that have significant macroscopic consequences, and therefore provide a simple test to evaluate the presence of uncrosslinked oligomers in an elastomer sample.

  3. Error performance of digital subscriber lines in the presence of impulse noise

    Science.gov (United States)

    Kerpez, Kenneth J.; Gottlieb, Albert M.

    1995-05-01

    This paper describes the error performance of the ISDN basic access digital subscriber line (DSL), the high bit rate digital subscriber line (HDSL), and the asymmetric digital subscriber line (ADSL) in the presence of impulse noise. Results are found by using data from the 1986 NYNEX impulse noise survey in simulations. It is shown that a simple uncoded ADSL would have an order of magnitude more errored seconds than DSL and HDSL.

  4. Product Line Practice Workshop Report

    National Research Council Canada - National Science Library

    Bass, Len

    1997-01-01

    The first Software Engineering Institute Product Line Practice Workshop was a hands-on meeting held in December 1996 to share industry and government practices in software product lines and to explore...

  5. Symptomatic nonfunctioning parathyroid cysts: Role of simple aspiration and ethanol ablation

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Jin Yong [Department of Radiology, Thyroid Center, Daerim St. Mary' s Hospital, #978-13 Daerim-dong, Youngdeungpo-gu, Seoul 150-070 (Korea, Republic of); Baek, Jung Hwan, E-mail: radbaek@naver.com [Department of Radiology, Thyroid Center, Daerim St. Mary' s Hospital, #978-13 Daerim-dong, Youngdeungpo-gu, Seoul 150-070 (Korea, Republic of); Department of Radiology and Research Institute of Radiology, University of Ulsan College of Medicine, Asan Medical Center, 86 Asanbyeongwon-Gil, Songpa-Gu, Seoul 138-736 (Korea, Republic of); Kim, Kyu Sun [Department of Radiology, Thyroid Center, Daerim St. Mary' s Hospital, #978-13 Daerim-dong, Youngdeungpo-gu, Seoul 150-070 (Korea, Republic of); Lee, Ducky [Department of Internal Medicine, Thyroid Center, Daerim St. Mary' s Hospital, #978-13 Daerim-dong, Youngdeungpo-gu, Seoul 150-070 (Korea, Republic of); Ha, Eun Ju; Lee, Jeong Hyun [Department of Radiology and Research Institute of Radiology, University of Ulsan College of Medicine, Asan Medical Center, 86 Asanbyeongwon-Gil, Songpa-Gu, Seoul 138-736 (Korea, Republic of)

    2013-02-15

    Objectives: To evaluate the outcomes of simple aspiration and ethanol ablation in the management of symptomatic nonfunctioning parathyroid cyst (PC). Methods: We performed simple aspirations for 12 PCs in 12 patients from March 1997 to June 2010. PC was diagnosed if the aspirated fluid was clear colorless and showed an elevated parathyroid hormone (PTH) level. Ethanol ablation (EA) was performed for recurrent PCs. Simple aspirations were performed using 23-gauge needles and EAs using 18-gauge needles with 99% ethanol under ultrasound (US) guidance. We evaluated cyst volume, cosmetic score, symptom score, and complications. Results: Mean follow-up period of all patients was 19.2 ± 12.9 months (median, 15.0 months; range, 7–40 months). Simple aspiration was successful in four patients, and the mean volume reduction after simple aspiration was 98.2 ± 3.5% (range, 92.9–100%). In eight recurrent cases, EA resulted in a significant decrease in volume (P = 0.012), as well as in cosmetic (P = 0.011) and symptom (P = 0.01) scores at last follow-up; however two cases of primary failure of EA was treated by repeat EA. No major complications occurred in any patient. Conclusions: For symptomatic nonfunctioning PCs, simple aspiration could be a first line procedure for diagnosis and treatment, while EA can be a subsequent treatment modality for recurrent cases.

  6. A Simple Kuramoto-like Circuit

    Science.gov (United States)

    Zeng, Zhuwei; Mertens, David

    2015-03-01

    The toy model for spontaneous collective synchronization is the Kuramoto model, a model of nonlinear coupled phase oscillators. Although it is a popular theoretical tool, the Kuramoto model is too simple to accurately characterize the dynamics of any experimental collection of oscillators. In this talk, we present a simple electronic oscillator design similar to the Wien bridge design of Temirbayev et al. Although the oscillator is not strictly modeled by the Kuramoto model, it can be quantitatively modeled by a more generic phase oscillator model. The coefficients governing the oscillator's behavior can be directly extracted from the voltage time series of the oscillator. We find that, in practice, only a handful of coefficients are necessary to quantitatively describe the behavior of the oscillators, making precise theory tractable. Dickinson Woodside Student-Faculty Research Fund.

  7. Solution of a simple inelastic scattering problem

    International Nuclear Information System (INIS)

    Knudson, S.K.

    1975-01-01

    Simple examples of elastic scattering, typically from square wells, serve as important pedagogical tools in discussion of the concepts and processes involved in elastic scattering events. An analytic solution of a model inelastic scattering system is presented here to serve in this role for inelastic events. The model and its solution are simple enough to be of pedagogical utility, but also retain enough of the important physical features to include most of the special characteristics of inelastic systems. The specific model chosen is the collision of an atom with a harmonic oscillator, interacting via a repulsive square well potential. Pedagogically important features of inelastic scattering, including its multistate character, convergence behavior, and dependence on an ''inelastic potential'' are emphasized as the solution is determined. Results are presented for various energies and strengths of inelastic scattering, which show that the model is capable of providing an elementary representation of vibrationally inelastic scattering

  8. Simple spherical ablative-implosion model

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, F.J.; Steele, J.T.; Larsen, J.T.

    1980-06-23

    A simple model of the ablative implosion of a high-aspect-ratio (shell radius to shell thickness ratio) spherical shell is described. The model is similar in spirit to Rosenbluth's snowplow model. The scaling of the implosion time was determined in terms of the ablation pressure and the shell parameters such as diameter, wall thickness, and shell density, and compared these to complete hydrodynamic code calculations. The energy transfer efficiency from ablation pressure to shell implosion kinetic energy was examined and found to be very efficient. It may be possible to attach a simple heat-transport calculation to our implosion model to describe the laser-driven ablation-implosion process. The model may be useful for determining other energy driven (e.g., ion beam) implosion scaling.

  9. A computational description of simple mediation analysis

    Directory of Open Access Journals (Sweden)

    Caron, Pier-Olivier

    2018-04-01

    Full Text Available Simple mediation analysis is an increasingly popular statistical analysis in psychology and in other social sciences. However, there is very few detailed account of the computations within the model. Articles are more often focusing on explaining mediation analysis conceptually rather than mathematically. Thus, the purpose of the current paper is to introduce the computational modelling within simple mediation analysis accompanied with examples with R. Firstly, mediation analysis will be described. Then, the method to simulate data in R (with standardized coefficients will be presented. Finally, the bootstrap method, the Sobel test and the Baron and Kenny test all used to evaluate mediation (i.e., indirect effect will be developed. The R code to implement the computation presented is offered as well as a script to carry a power analysis and a complete example.

  10. Interacting open Wilson lines from noncommutative field theories

    International Nuclear Information System (INIS)

    Kiem, Youngjai; Lee, Sangmin; Rey, Soo-Jong; Sato, Haru-Tada

    2002-01-01

    In noncommutative field theories, it is known that the one-loop effective action describes the propagation of noninteracting open Wilson lines, obeying the flying dipole's relation. We show that the two-loop effective action describes the cubic interaction among 'closed string' states created by open Wilson line operators. Taking d-dimensional λ[Φ 3 ] * theory as the simplest setup, we compute the nonplanar contribution at a low-energy and large noncommutativity limit. We find that the contribution is expressible in a remarkably simple cubic interaction involving scalar open Wilson lines only and nothing else. We show that the interaction is purely geometrical and noncommutative in nature, depending only on the size of each open Wilson line

  11. Force balance near an X line in a collisionless plasma

    Science.gov (United States)

    Lyons, L. R.; Pridmore-Brown, D. C.

    1990-01-01

    The suggestion by Dungey (1988) that the gyroviscosity associated with gradients of the off-diagonal elements of the electron pressure tensor can balance a reconnection electric field along a magnetic X line in a collisionless plasma is investigated. The detailed balance of forces in the vicinity of an X line is evaluated using a two-dimensional magnetic field model and a simple model for particle motion. The results show that the gyroviscosity can indeed provide the force required to balance a reconnection electric field in that region, so that neither collisions nor wave turbulence are necessary for reconnection. The results also show that there should not be a significant increase in current from electron acceleration very near an X line. Reasonable numerical estimates are obtained for conditions expected in the vicinity of the distant X line in the geomagnetic tail.

  12. simple sequence repeats (EST-SSR)

    African Journals Online (AJOL)

    Yomi

    2012-01-19

    Jan 19, 2012 ... 212 primer pairs selected, based on repeat patterns of n≥8 for di-, tri-, tetra- and penta-nucleotide repeat ... Cluster analysis revealed a high genetic similarity among the sugarcane (Saccharum spp.) breeding lines which could reduce the genetic gain in ..... The multiple allele characteristic of SSR com-.

  13. Simple recursion relations for general field theories

    International Nuclear Information System (INIS)

    Cheung, Clifford; Shen, Chia-Hsien; Trnka, Jaroslav

    2015-01-01

    On-shell methods offer an alternative definition of quantum field theory at tree-level, replacing Feynman diagrams with recursion relations and interaction vertices with a handful of seed scattering amplitudes. In this paper we determine the simplest recursion relations needed to construct a general four-dimensional quantum field theory of massless particles. For this purpose we define a covering space of recursion relations which naturally generalizes all existing constructions, including those of BCFW and Risager. The validity of each recursion relation hinges on the large momentum behavior of an n-point scattering amplitude under an m-line momentum shift, which we determine solely from dimensional analysis, Lorentz invariance, and locality. We show that all amplitudes in a renormalizable theory are 5-line constructible. Amplitudes are 3-line constructible if an external particle carries spin or if the scalars in the theory carry equal charge under a global or gauge symmetry. Remarkably, this implies the 3-line constructibility of all gauge theories with fermions and complex scalars in arbitrary representations, all supersymmetric theories, and the standard model. Moreover, all amplitudes in non-renormalizable theories without derivative interactions are constructible; with derivative interactions, a subset of amplitudes is constructible. We illustrate our results with examples from both renormalizable and non-renormalizable theories. Our study demonstrates both the power and limitations of recursion relations as a self-contained formulation of quantum field theory.

  14. A simple Fourier analysis technique for measuring the dynamic response of manual control systems.

    Science.gov (United States)

    Allen, R. W.; Jex, H. R.

    1972-01-01

    From a practical standpoint most dynamic response analysis techniques are complicated, expensive, and time consuming to mechanize and operate. Adaptive parameter tracking techniques partially overcome these faults, but they have prescribed forms which is an undesirable restriction for basic research. To overcome these drawbacks, an on-line Fourier analysis technique has been developed which deals only with the input and error signals in a manual feedback control system. Several sine waves are used for the input, and the on-line data measurement includes the error variance and a simple means for obtaining the sine and cosine transforms of the error signal at each of the input frequencies. From this relatively small amount of data, we show simple ways to compute the open- and closed-loop dynamic response at input frequencies and the relative amount of linearly correlated power in the error signal.

  15. Simple CARS measurement point traversing scheme

    Science.gov (United States)

    Eckbreth, A. C.; Stufflebeam, J. H.

    1985-05-01

    The present simple optical scheme employing fixed field lenses permits large measurement point translations for small changes in the separation of Galilean telescopes. For the case of an intensity-dependent process, such as CARS, these translations are accomplished at a constant focusing solid angle, thereby yielding constant focal zone intensity. This will eliminate any signal variation with position which is implicitly due to measurement location.

  16. A simple neutron-gamma discriminating system

    International Nuclear Information System (INIS)

    Liu Zhongming; Xing Shilin; Wang Zhongmin

    1986-01-01

    A simple neutron-gamma discriminating system is described. A detector and a pulse shape discriminator are suitable for the neutron-gamma discriminating system. The influence of the constant fraction discriminator threshold energy on the neutron-gamma resolution properties is shown. The neutron-gamma timing distributions from an 241 Am-Be source, 2.5 MeV neutron beam and 14 MeV neutron beam are presented

  17. Simple techniques for optimal smile modification.

    Science.gov (United States)

    Romano, Rafi

    2008-05-01

    Orthodontics is no longer a treatment modality for moderate or severe malocclusion. Patients of all age groups seek help in tooth repositioning. Esthetic demands are extremely high and clinicians need to be more creative and more open to alternative techniques that will suit the demand for invisible treatment, at reasonable costs, maximum accuracy, and with relative comfort. A few simple techniques are described for very common orthodontic problems.

  18. kFOIL: Learning simple relational kernels

    OpenAIRE

    Landwehr, Niels; Passerini, Andrea; De Raedt, Luc; Frasconi, Paolo

    2006-01-01

    A novel and simple combination of inductive logic programming with kernel methods is presented. The kFOIL algorithm integrates the well-known inductive logic programming system FOIL with kernel methods. The feature space is constructed by leveraging FOIL search for a set of relevant clauses. The search is driven by the performance obtained by a support vector machine based on the resulting kernel. In this way, kFOIL implements a dynamic propositionalization approach. Both classification an...

  19. Diffraction enhanced imaging: a simple model

    International Nuclear Information System (INIS)

    Zhu Peiping; Yuan Qingxi; Huang Wanxia; Wang Junyue; Shu Hang; Chen Bo; Liu Yijin; Li Enrong; Wu Ziyu

    2006-01-01

    Based on pinhole imaging and conventional x-ray projection imaging, a more general DEI (diffraction enhanced imaging) equation is derived using simple concepts in this paper. Not only can the new DEI equation explain all the same problems as with the DEI equation proposed by Chapman, but also some problems that cannot be explained with the old DEI equation, such as the noise background caused by small angle scattering diffracted by the analyser

  20. Diffraction enhanced imaging: a simple model

    Energy Technology Data Exchange (ETDEWEB)

    Zhu Peiping; Yuan Qingxi; Huang Wanxia; Wang Junyue; Shu Hang; Chen Bo; Liu Yijin; Li Enrong; Wu Ziyu [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

    2006-10-07

    Based on pinhole imaging and conventional x-ray projection imaging, a more general DEI (diffraction enhanced imaging) equation is derived using simple concepts in this paper. Not only can the new DEI equation explain all the same problems as with the DEI equation proposed by Chapman, but also some problems that cannot be explained with the old DEI equation, such as the noise background caused by small angle scattering diffracted by the analyser.

  1. Adaptation in simple and complex fitness landscapes

    OpenAIRE

    Jain, Kavita; Krug, Joachim

    2005-01-01

    This is an introductory review of deterministic mutation-selection models for asexual populations (i.e., quasispecies theory) and related topics. First, the basic concepts of fitness, mutations, and sequence space are introduced. Different types of mutation-selection dynamics are defined and their relation to problems of statistical physics are outlined. Then the stationary population distribution in simple, single peak fitness landscapes is discussed at length, with particular emphasis on th...

  2. Some simple demonstration experiments involving homopolar motors

    OpenAIRE

    Stewart,Seán M.

    2007-01-01

    The ready availability of very strong permanent magnets in the form of rare-earth magnetic alloys such as neodymium-iron-boron has lead to renewed interest in one of the oldest types of electric motors - the homopolar motor. The ease with which a demonstration homopolar motor can now be built and operated when neodymium magnets are used is quite remarkable. In this paper some simple homopolar motors employing neodymium magnets suitable for demonstrational purposes are described and discussed.

  3. Entropy estimates for simple random fields

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Justesen, Jørn

    1995-01-01

    We consider the problem of determining the maximum entropy of a discrete random field on a lattice subject to certain local constraints on symbol configurations. The results are expected to be of interest in the analysis of digitized images and two dimensional codes. We shall present some examples...... of binary and ternary fields with simple constraints. Exact results on the entropies are known only in a few cases, but we shall present close bounds and estimates that are computationally efficient...

  4. Multiphase flow in geometrically simple fracture intersections

    Science.gov (United States)

    Basagaoglu, H.; Meakin, P.; Green, C.T.; Mathew, M.; ,

    2006-01-01

    A two-dimensional lattice Boltzmann (LB) model with fluid-fluid and solid-fluid interaction potentials was used to study gravity-driven flow in geometrically simple fracture intersections. Simulated scenarios included fluid dripping from a fracture aperture, two-phase flow through intersecting fractures and thin-film flow on smooth and undulating solid surfaces. Qualitative comparisons with recently published experimental findings indicate that for these scenarios the LB model captured the underlying physics reasonably well.

  5. Which finite simple groups are unit groups?

    DEFF Research Database (Denmark)

    Davis, Christopher James; Occhipinti, Tommy

    2014-01-01

    We prove that if G is a finite simple group which is the unit group of a ring, then G is isomorphic to either (a) a cyclic group of order 2; (b) a cyclic group of prime order 2^k −1 for some k; or (c) a projective special linear group PSLn(F2) for some n ≥ 3. Moreover, these groups do all occur...

  6. On Casimir elements of simple Lie algebras

    International Nuclear Information System (INIS)

    El Houari, M.

    1996-08-01

    In this letter, we recall briefly the generalized Casimir elements of a finite dimensional Lie algebra. We specify those of orders two and three: when the Lie algebra is simple (even semisimple), we begin by normalizing the former (the quadratic), and then we study some actions of the latter (the cubic). In particular, we introduce a graphical formalism, translating rigorously the tensorial calculus. This allows us to prove the main theorem in a graphic theoretic manner. (author). 11 refs, 1 tab

  7. Simple Flame Test Techniques Using Cotton Swabs

    Science.gov (United States)

    Sanger, Michael J.; Phelps, Amy J.

    2004-07-01

    This article describes three new methods for performing simple flame tests using cotton swabs. The first method uses a Bunsen burner and solid metal salts; the second method uses a Bunsen burner and 1 M aqueous solutions of metal salts; and the third method uses candles, rubbing alcohol, and solid metal salts. These methods have the advantage of being easy to perform, require inexpensive and easily-obtained materials, and have easy cleanup and disposal methods. See the Discussion on this Tested Demonstation .

  8. A simple furnace for neutron diffraction studies

    International Nuclear Information System (INIS)

    Bailey, F.P.; Bennett, C.E.G.

    1979-01-01

    A simple yet effective high temperature furnace for heating crystals or powder specimens for neutron diffraction studies on a theta/2theta diffractometer is described. The furnace can maintain samples at temperatures up to 1573 K, in air, with a stability of +- 4 K for periods of many hours. Specimen temperature is uniform within 12 K, or much less with the use of a silica sleeve. (Auth.)

  9. Radon in buildings: a simple detection method

    International Nuclear Information System (INIS)

    Lumb, N.

    1989-01-01

    Natural background radiation inside buildings can be studied using this simple detection method. Contaminated dust particles adhere readily to a membrane made of soft toilet paper placed across the collection pipe of a vacuum cleaner. Indirect evidence for the abundance of radon in the air can be inferred from measuring the radon daughters on the membrane using a Geiger-Muller tube. Experimental results are presented and discussed. (UK)

  10. Simple Synthesis Method for Alumina Nanoparticle

    OpenAIRE

    Daniel Damian; Florentina Cziple; Adina Segneanu; Ioan Grozescu

    2017-01-01

    Globally, the human population steady increase, expansion of urban areas, excessive industrialization including in agriculture, caused not only decrease to depletion of non-renewable resources, a rapid deterioration of the environment with negative impact on water quality, soil productivity and of course quality of life in general. This paper aims to prepare size controlled nanoparticles of aluminum oxide using a simple synthesis method. The morphology and dimensions of n...

  11. A simple mechanism for complex social behavior.

    Directory of Open Access Journals (Sweden)

    Katie Parkinson

    2011-03-01

    Full Text Available The evolution of cooperation is a paradox because natural selection should favor exploitative individuals that avoid paying their fair share of any costs. Such conflict between the self-interests of cooperating individuals often results in the evolution of complex, opponent-specific, social strategies and counterstrategies. However, the genetic and biological mechanisms underlying complex social strategies, and therefore the evolution of cooperative behavior, are largely unknown. To address this dearth of empirical data, we combine mathematical modeling, molecular genetic, and developmental approaches to test whether variation in the production of and response to social signals is sufficient to generate the complex partner-specific social success seen in the social amoeba Dictyostelium discoideum. Firstly, we find that the simple model of production of and response to social signals can generate the sort of apparent complex changes in social behavior seen in this system, without the need for partner recognition. Secondly, measurements of signal production and response in a mutant with a change in a single gene that leads to a shift in social behavior provide support for this model. Finally, these simple measurements of social signaling can also explain complex patterns of variation in social behavior generated by the natural genetic diversity found in isolates collected from the wild. Our studies therefore demonstrate a novel and elegantly simple underlying mechanistic basis for natural variation in complex social strategies in D. discoideum. More generally, they suggest that simple rules governing interactions between individuals can be sufficient to generate a diverse array of outcomes that appear complex and unpredictable when those rules are unknown.

  12. Modeling reproductive decisions with simple heuristics

    Directory of Open Access Journals (Sweden)

    Peter Todd

    2013-10-01

    Full Text Available BACKGROUND Many of the reproductive decisions that humans make happen without much planning or forethought, arising instead through the use of simple choice rules or heuristics that involve relatively little information and processing. Nonetheless, these heuristic-guided decisions are typically beneficial, owing to humans' ecological rationality - the evolved fit between our constrained decision mechanisms and the adaptive problems we face. OBJECTIVE This paper reviews research on the ecological rationality of human decision making in the domain of reproduction, showing how fertility-related decisions are commonly made using various simple heuristics matched to the structure of the environment in which they are applied, rather than being made with information-hungry mechanisms based on optimization or rational economic choice. METHODS First, heuristics for sequential mate search are covered; these heuristics determine when to stop the process of mate search by deciding that a good-enough mate who is also mutually interested has been found, using a process of aspiration-level setting and assessing. These models are tested via computer simulation and comparison to demographic age-at-first-marriage data. Next, a heuristic process of feature-based mate comparison and choice is discussed, in which mate choices are determined by a simple process of feature-matching with relaxing standards over time. Parental investment heuristics used to divide resources among offspring are summarized. Finally, methods for testing the use of such mate choice heuristics in a specific population over time are then described.

  13. Necessity of Antibiotics following Simple Exodontia

    Directory of Open Access Journals (Sweden)

    Waqas Yousuf

    2016-01-01

    Full Text Available Introduction. The aim of our study is to assess the need for postoperative antibiotics following simple exodontia and determine its role in minimizing patient discomfort and postoperative complications. Material and Methods. All the patients undergoing simple extractions were grouped into two categories: Group 1, patients receiving antibiotics, and Group 2, patients receiving no antibiotics. Patients were recalled on the sixth day to assess postoperative complications. On recall, patients were evaluated for signs of persistent inflammation and signs of dry socket. Presence of persistent inflammation and/or suppuration on the 6th day was considered as wound infection. Results. A total of 146 patients were included in this study. Out of the total sample, 134 (91.8% presented with no postoperative complications and 12 (8.2% had postoperative complications, out of which 11 (7.5% patients presented with dry socket (alveolar osteitis, 5 (3.4% in the antibiotic group and 6 (4.1% in the nonantibiotic group. Only 1 patient (0.7% was reported with infection of the extraction socket in the nonantibiotic group, whereas no case of infection was found in the antibiotic group. Conclusion. Antibiotics are not required after simple extractions in patients who are not medically comprised nor do they have any role in preventing postoperative complications.

  14. The Monash University Interactive Simple Climate Model

    Science.gov (United States)

    Dommenget, D.

    2013-12-01

    The Monash university interactive simple climate model is a web-based interface that allows students and the general public to explore the physical simulation of the climate system with a real global climate model. It is based on the Globally Resolved Energy Balance (GREB) model, which is a climate model published by Dommenget and Floeter [2011] in the international peer review science journal Climate Dynamics. The model simulates most of the main physical processes in the climate system in a very simplistic way and therefore allows very fast and simple climate model simulations on a normal PC computer. Despite its simplicity the model simulates the climate response to external forcings, such as doubling of the CO2 concentrations very realistically (similar to state of the art climate models). The Monash simple climate model web-interface allows you to study the results of more than a 2000 different model experiments in an interactive way and it allows you to study a number of tutorials on the interactions of physical processes in the climate system and solve some puzzles. By switching OFF/ON physical processes you can deconstruct the climate and learn how all the different processes interact to generate the observed climate and how the processes interact to generate the IPCC predicted climate change for anthropogenic CO2 increase. The presentation will illustrate how this web-base tool works and what are the possibilities in teaching students with this tool are.

  15. Necessity of Antibiotics following Simple Exodontia.

    Science.gov (United States)

    Yousuf, Waqas; Khan, Moiz; Mehdi, Hasan; Mateen, Sana

    2016-01-01

    Introduction. The aim of our study is to assess the need for postoperative antibiotics following simple exodontia and determine its role in minimizing patient discomfort and postoperative complications. Material and Methods. All the patients undergoing simple extractions were grouped into two categories: Group 1, patients receiving antibiotics, and Group 2, patients receiving no antibiotics. Patients were recalled on the sixth day to assess postoperative complications. On recall, patients were evaluated for signs of persistent inflammation and signs of dry socket. Presence of persistent inflammation and/or suppuration on the 6th day was considered as wound infection. Results. A total of 146 patients were included in this study. Out of the total sample, 134 (91.8%) presented with no postoperative complications and 12 (8.2%) had postoperative complications, out of which 11 (7.5%) patients presented with dry socket (alveolar osteitis), 5 (3.4%) in the antibiotic group and 6 (4.1%) in the nonantibiotic group. Only 1 patient (0.7%) was reported with infection of the extraction socket in the nonantibiotic group, whereas no case of infection was found in the antibiotic group. Conclusion. Antibiotics are not required after simple extractions in patients who are not medically comprised nor do they have any role in preventing postoperative complications.

  16. Magnet power supply and beam line control for a secondary beam line K6

    International Nuclear Information System (INIS)

    Suzuki, Y.; Takasaki, M.; Minakawa, M.; Ishii, H.; Kato, Y.; Ieiri, M.; Tanaka, K.H.; Noumi, H.; Yamanoi, Y.

    1992-01-01

    K6 is a secondary separated-beam line with momentum range up to 2.0 GeV/c in the north experimental hall at the KEK 12 GeV Proton Synchrotron (KEK-PS). On the construction, newly developed magnet power supplies (MPSs), in each of them a microprocessor is embedded, are introduced. The features of the MPS are as follows: 1, The MPS is connected to an upper-level beam line controller (BLC) by GPIB highway for exchanging simple messages. 2, All the operations of the MPS are supervised by the microprocessor, which has its individual parameters and fault messages. It reduces the load of the upper-level controller. 3, The MPS has functions to inspect itself and to report the result. It saves much time and labor of maintenance. (author)

  17. CLO : The cell line ontology

    NARCIS (Netherlands)

    Sarntivijai, Sirarat; Lin, Yu; Xiang, Zuoshuang; Meehan, Terrence F.; Diehl, Alexander D.; Vempati, Uma D.; Schuerer, Stephan C.; Pang, Chao; Malone, James; Parkinson, Helen; Liu, Yue; Takatsuki, Terue; Saijo, Kaoru; Masuya, Hiroshi; Nakamura, Yukio; Brush, Matthew H.; Haendel, Melissa A.; Zheng, Jie; Stoeckert, Christian J.; Peters, Bjoern; Mungall, Christopher J.; Carey, Thomas E.; States, David J.; Athey, Brian D.; He, Yongqun

    2014-01-01

    Background: Cell lines have been widely used in biomedical research. The community-based Cell Line Ontology (CLO) is a member of the OBO Foundry library that covers the domain of cell lines. Since its publication two years ago, significant updates have been made, including new groups joining the CLO

  18. Simple Low-Density Parity Check (LDPC) Staircase Forward Error Correction (FEC) Scheme for FECFRAME

    OpenAIRE

    Roca, Vincent; Cunche, Mathieu; Lacan, Jérôme

    2012-01-01

    Internet Engineering Task Force (IETF) Request for Comments 6816; This document describes a fully specified simple Forward Error Correction (FEC) scheme for Low-Density Parity Check (LDPC) Staircase codes that can be used to protect media streams along the lines defined by FECFRAME. These codes have many interesting properties: they are systematic codes, they perform close to ideal codes in many use-cases, and they also feature very high encoding and decoding throughputs. LDPC-Staircase codes...

  19. Random line graphs and a linear law for assortativity.

    Science.gov (United States)

    Liu, Dajie; Trajanovski, Stojan; Van Mieghem, Piet

    2013-01-01

    For a fixed number N of nodes, the number of links L in the line graph H(N,L) can only appear in consecutive intervals, called a band of L. We prove that some consecutive integers can never represent the number of links L in H(N,L), and they are called a bandgap of L. We give the exact expressions of bands and bandgaps of L. We propose a model which can randomly generate simple graphs which are line graphs of other simple graphs. The essence of our model is to merge step by step a pair of nodes in cliques, which we use to construct line graphs. Obeying necessary rules to ensure that the resulting graphs are line graphs, two nodes to be merged are randomly chosen at each step. If the cliques are all of the same size, the assortativity of the line graphs in each step are close to 0, and the assortativity of the corresponding root graphs increases linearly from -1 to 0 with the steps of the nodal merging process. If we dope the constructing elements of the line graphs-the cliques of the same size-with a relatively smaller number of cliques of different size, the characteristics of the assortativity of the line graphs is completely altered. We also generate line graphs with the cliques whose sizes follow a binomial distribution. The corresponding root graphs, with binomial degree distributions, zero assortativity, and semicircle eigenvalue distributions, are equivalent to Erdős-Rényi random graphs.

  20. Lines of landscape organisation

    DEFF Research Database (Denmark)

    Løvschal, Mette

    2015-01-01

    This paper offers a landscape analysis of the earliest linear landscape boundaries on Skovbjerg Moraine, Denmark, during the first millennium BC. Using Delaunay triangulation as well as classic distribution analyses, it demonstrates that landscape boundaries articulated already established use......-patterns close to roads, but also intercepted the central lines of movement and conflicted with previous ways of organizing the landscape. This development is interpreted as a different form of large-scale landholding, in which livestock possibly played a dominant role and boundaries were used to confiscate land...... in the zones bordering suitable pastures. This situation shows obvious parallels with southern Britain centuries earlier. It is discussed how the study of these physical boundaries provides new insights into the organization of pre-Roman landscapes, not only demonstrating a continuing engagement with landscape...

  1. Line broadening by focusing

    International Nuclear Information System (INIS)

    Brito, A.L. de; Jabs, A.

    1983-01-01

    It is pointed out that the spectral width of a quasi-monochromatic light beam broadens when the beam is focused. A quantitative formula for this broadening is derived from classical wave theory. The effect is shown to explain some experiments on laser beams done by E. Panarella which that author has explained under the ad-hoc hypothesis that the frequency of the photons changes along with the intensity of the light beam. The line broadening by focusing might also contribute to gas ionization by incident light when the ionization potential is well above the mean photon energy. Some remarks are made on some direct applications of the Heisenberg relations in comparison with our treatment. (Author) [pt

  2. Chained learning architectures in a simple closed-loop behavioural context

    DEFF Research Database (Denmark)

    Kulvicius, Tomas; Porr, Bernd; Wörgötter, Florentin

    2007-01-01

    OBJECTIVE: Living creatures can learn or improve their behaviour by temporally correlating sensor cues where near-senses (e.g., touch, taste) follow after far-senses (vision, smell). Such type of learning is related to classical and/or operant conditioning. Algorithmically all these approaches...... are very simple and consist of single learning unit. The current study is trying to solve this problem focusing on chained learning architectures in a simple closed-loop behavioural context. METHODS: We applied temporal sequence learning (Porr B and Wörgötter F 2006) in a closed-loop behavioural system...... where a driving robot learns to follow a line. Here for the first time we introduced two types of chained learning architectures named linear chain and honeycomb chain. We analyzed such architectures in an open and closed-loop context and compared them to the simple learning unit. CONCLUSIONS...

  3. On-line and off-line data analysis for the EUSO-TA experiment

    International Nuclear Information System (INIS)

    Piotrowski, Lech Wiktor; Casolino, Marco; Conti, Livio; Ebisuzaki, Toshikazu; Fornaro, Claudio; Kawasaki, Yoshiya; Hachisu, Yusuke; Ohmori, Hitoshi; De Santis, Cristian; Shinozaki, Kenji; Takizawa, Yoshiyuki; Uehara, Yoshihiro

    2015-01-01

    We show the principles of the communication protocol, on-line calibration, off-line data format as well as basic visualisation and data analysis software implemented for the EUSO-TA on-ground experiment, being the first step towards implementation in a future space based mission. EUSO-TA is an on-ground detector for measuring UV (290–430 nm) light from extensive air showers induced by cosmic rays. It is a prototype experiment for the JEM-EUSO space-borne mission, built according to the same constraints of low mass, low power consumption and thus low computing power. Nevertheless, it needs to process a huge amount of data in short time, taking 2.5μs exposures for 2304 channels. The low processing power and high time resolution require an efficient communication protocol and simple yet powerful algorithms for on-line analysis. The off-line data format is designed for storing a huge amount of data, at the same time allowing easy access, analysis and sharing. Its structure is scalable and adjustable to different experimental designs. It is independent of the data origin, whether it is hardware or a Monte-Carlo simulator. Use of object-oriented techniques and the ROOT framework allows rapid development of dedicated analysis software, such as a Python based quick-view program described herein. Basic capabilities of the software, such as display of the focal surface, light curves and calibration data are shown in this paper

  4. On-line and off-line data analysis for the EUSO-TA experiment

    Energy Technology Data Exchange (ETDEWEB)

    Piotrowski, Lech Wiktor, E-mail: lech.piotrowski@riken.jp [RIKEN, Wako (Japan); Casolino, Marco [RIKEN, Wako (Japan); INFN and Univ. Rome Tor Vergata, Rome (Italy); Conti, Livio [International Telematic University UNINETTUNO, Rome (Italy); Ebisuzaki, Toshikazu [RIKEN, Wako (Japan); Fornaro, Claudio [International Telematic University UNINETTUNO, Rome (Italy); Kawasaki, Yoshiya; Hachisu, Yusuke; Ohmori, Hitoshi [RIKEN, Wako (Japan); De Santis, Cristian [INFN and Univ. Rome Tor Vergata, Rome (Italy); Shinozaki, Kenji [Institute for Astronomy and Astrophysics, Kepler Center, University of Tübingen, Sand 6, D-72076 Tübingen (Germany); RIKEN, Wako (Japan); Takizawa, Yoshiyuki; Uehara, Yoshihiro [RIKEN, Wako (Japan)

    2015-02-11

    We show the principles of the communication protocol, on-line calibration, off-line data format as well as basic visualisation and data analysis software implemented for the EUSO-TA on-ground experiment, being the first step towards implementation in a future space based mission. EUSO-TA is an on-ground detector for measuring UV (290–430 nm) light from extensive air showers induced by cosmic rays. It is a prototype experiment for the JEM-EUSO space-borne mission, built according to the same constraints of low mass, low power consumption and thus low computing power. Nevertheless, it needs to process a huge amount of data in short time, taking 2.5μs exposures for 2304 channels. The low processing power and high time resolution require an efficient communication protocol and simple yet powerful algorithms for on-line analysis. The off-line data format is designed for storing a huge amount of data, at the same time allowing easy access, analysis and sharing. Its structure is scalable and adjustable to different experimental designs. It is independent of the data origin, whether it is hardware or a Monte-Carlo simulator. Use of object-oriented techniques and the ROOT framework allows rapid development of dedicated analysis software, such as a Python based quick-view program described herein. Basic capabilities of the software, such as display of the focal surface, light curves and calibration data are shown in this paper.

  5. Numerical Modelling of the Segmental Lining of Underground Structures

    Directory of Open Access Journals (Sweden)

    Akbar Salemi

    2014-12-01

    Full Text Available There are several methods for analysing the behaviour of underground structures under different loading conditions. Most of these methods have many simplifications; therefore, in some cases, the results are too conservative and a very high safety factor, usually of more than 2 is needed. On the other hand, for stability analysis and the designing of support systems, these methods consider segmental lining and its joints as a uniform lining or a lining with pin connections. In this study, numerical modelling of the segmental lining of a tunnel was analysed using a sensitivity analysis of the static modelling. The numerical results were obtained by using a finite difference method (FLAC2D. Using this form of analysis, a new simple methodology was introduced so that more reliable results can be obtained. By comparing the frame analysis results obtained by the SAP2000 software with those obtained by the proposed method, it was concluded that the suggested method can be used as a simple and reasonable approach for the segmental lining of underground structures such as tunnels.

  6. Edge and line enhancement by adaptive lattice filtering

    International Nuclear Information System (INIS)

    Brolley, J.E.

    1979-01-01

    Digitized images have been two-dimensionally transformed to the Haar sequency domain. High-sequency boosting was performed and the inverse Haar two-dimensional transform applied. The resulting image was then raster-scanned with a continuously adaptive lattice filter. This procedure was applied to a simple image of a photographic step tablet and a complex scene. All of the lines of the step tablet were well defined over the whole dynamic range. Useful definition of lines in the complex scene was obtained

  7. Systematic Derivation of Static Analyses for Software Product Lines

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Brabrand, Claus; Wasowski, Andrzej

    2014-01-01

    A recent line of work lifts particular verification and analysis methods to Software Product Lines (SPL). In an effort to generalize such case-by-case approaches, we develop a systematic methodology for lifting program analyses to SPLs using abstract interpretation. Abstract interpretation...... is a classical framework for deriving static analyses in a compositional, step-by-step manner. We show how to take an analysis expressed as an abstract interpretation and lift each of the abstract interpretation steps to a family of programs. This includes schemes for how to lift domain types, and combinators...... analysis for a simple imperative language....

  8. Radiosensitivity of mesothelioma cell lines

    International Nuclear Information System (INIS)

    Haekkinen, A.M.; Laasonen, A.; Linnainmaa, K.; Mattson, K.; Pyrhoenen, S.

    1996-01-01

    The present study was carried out in order to examine the radiosensitivity of malignant pleural mesothelioma cell lines. Cell kinetics, radiation-induced delay of the cell cycle and DNA ploidy of the cell lines were also determined. For comparison an HeLa and a human foetal fibroblast cell line were simultaneously explored. Six previously cytogenetically and histologically characterized mesothelioma tumor cell lines were applied. A rapid tiazolyl blue microtiter (MTT) assay was used to analyze radiosensitivity and cell kinetics and DNA ploidy of the cultured cells were determined by flow cytometry. The survival fraction after a dose of 2 Gy (SF2), parameters α and β of the linear quadratic model (LQ-model) and mean inactivation dose (D MID ) were also estimated. The DNA index of four cell lines equaled 1.0 and two cell lines equaled 1.5 and 1.6. Different mesothelioma cell lines showed a great variation in radiosensitivity. Mean survival fraction after a radiation dose of 2 Gy (SF2) was 0.60 and ranged from 0.36 to 0.81 and mean α value was 0.26 (range 0.48-0.083). The SF2 of the most sensitive diploid mesothelioma cell line was 0.36: Less than that of the foetal fibroblast cell line (0.49). The survival fractions (0.81 and 0.74) of the two most resistant cell lines, which also were aneuploid, were equal to that of the HeLa cell line (0.78). The α/β ratios of the most sensitive cell lines were almost an order of magnitude greater than those of the two most resistant cell lines. Radiation-induced delay of the most resistant aneuploid cell line was similar to that of HeLa cells but in the most sensitive (diploid cells) there was practically no entry into the G1 phase following the 2 Gy radiation dose during 36 h. (orig.)

  9. THE SIMPLE SURVEY: OBSERVATIONS, REDUCTION, AND CATALOG

    International Nuclear Information System (INIS)

    Damen, M.; Franx, M.; Taylor, E. N.; Labbe, I.; Van Dokkum, P. G.; Muzzin, A.; Brandt, W. N.; Dickinson, M.; Gawiser, E.; Illingworth, G. D.; Kriek, M.; Marchesini, D.; Papovich, C.; Rix, H.-W.

    2011-01-01

    We present the Spitzer IRAC/MUSYC Public Legacy Survey in the Extended CDF-South (SIMPLE), which consists of deep IRAC observations covering the ∼1600 arcmin 2 area surrounding GOODS-S. The limiting magnitudes of the SIMPLE IRAC mosaics typically are 23.8, 23.6, 21.9, and 21.7, at 3.6 μm, 4.5 μm, 5.8 μm, and 8.0 μm, respectively (5σ total point source magnitudes in AB). The SIMPLE IRAC images are combined with the 10' x 15' GOODS IRAC mosaics in the center. We give detailed descriptions of the observations, data reduction, and properties of the final images, as well as the detection and photometry methods used to build a catalog. Using published optical and near-infrared data from the Multiwavelength Survey by Yale-Chile (MUSYC), we construct an IRAC-selected catalog, containing photometry in UBVRIz'JHK, [3.6 μm], [4.5 μm], [5.8 μm], and [8.0 μm]. The catalog contains 43,782 sources with S/N >5 at 3.6 μm, 19,993 of which have 13-band photometry. We compare this catalog to the publicly available MUSYC and FIREWORKS catalogs and discuss the differences. Using a high signal-to-noise sub-sample of 3391 sources with ([3.6] + [4.5])/2 * >10 11 M sun ) are passively evolving, in agreement with earlier results from surveys covering less area.

  10. Robotic assisted simple prostatectomy: recent advances.

    Science.gov (United States)

    Vince, Randy; Hampton, Lance J; Vartolomei, Mihai D; Shariat, Shahrokh F; Porpiglia, Francesco; Autorino, Riccardo

    2018-05-01

    Robotic assisted simple prostatectomy (RASP) represents a minimally invasive evolution of traditional open simple prostatectomy for the surgical treatment of severe lower urinary tract symptoms (LUTS) because of benign prostatic enlargement (BPE). Aim of the present review is to summarize the most recent evidence on this novel procedure, and to better define its current role in the surgical armamentarium for the treatment of BPE. Several studies demonstrated that RASP can be safely and effectively performed in centers with sufficient expertise. The procedure can duplicate its open counterpart with the advantage of lower perioperative morbidity, and ultimately faster patient recovery. Overall, the status of RASP seems to be well beyond that of an 'investigational' procedure, and guidelines should be amended accordingly.Nevertheless, it remains to be determined what the place of the RASP procedure in the surgical armamentarium for the treatment of symptomatic BPE will be. Over the most recent years, few comparative studies have been reported, allowing in part to draw some conclusions. RASP seems to be attractive when compared with open simple prostatectomy as it can offer less blood loss, and shorter hospital stay. However, its advantages over transurethral enucleation techniques - such as HoLEP - remain unclear. There are some specific indications, such as the presence of concomitant bladder diverticula or stones, for example, where a robotic approach could represent an appealing solution. Ultimately, further research should look at a cost analysis to determine which technique can be more cost effective. Last, the issue of the learning curve for the different procedures for symptomatic BPE remain to be further scrutinized. RASP offers potential advantages over other available techniques for the treatment of large prostate glands. In centers, wherever a solid robotic program is already in place, this procedure is likely to be increasingly implemented.

  11. GENERATION ALGORITHM OF DISCRETE LINE IN MULTI-DIMENSIONAL GRIDS

    Directory of Open Access Journals (Sweden)

    L. Du

    2017-09-01

    Full Text Available Discrete Global Grids System (DGGS is a kind of digital multi-resolution earth reference model, in terms of structure, it is conducive to the geographical spatial big data integration and mining. Vector is one of the important types of spatial data, only by discretization, can it be applied in grids system to make process and analysis. Based on the some constraint conditions, this paper put forward a strict definition of discrete lines, building a mathematic model of the discrete lines by base vectors combination method. Transforming mesh discrete lines issue in n-dimensional grids into the issue of optimal deviated path in n-minus-one dimension using hyperplane, which, therefore realizing dimension reduction process in the expression of mesh discrete lines. On this basis, we designed a simple and efficient algorithm for dimension reduction and generation of the discrete lines. The experimental results show that our algorithm not only can be applied in the two-dimensional rectangular grid, also can be applied in the two-dimensional hexagonal grid and the three-dimensional cubic grid. Meanwhile, when our algorithm is applied in two-dimensional rectangular grid, it can get a discrete line which is more similar to the line in the Euclidean space.

  12. Generation Algorithm of Discrete Line in Multi-Dimensional Grids

    Science.gov (United States)

    Du, L.; Ben, J.; Li, Y.; Wang, R.

    2017-09-01

    Discrete Global Grids System (DGGS) is a kind of digital multi-resolution earth reference model, in terms of structure, it is conducive to the geographical spatial big data integration and mining. Vector is one of the important types of spatial data, only by discretization, can it be applied in grids system to make process and analysis. Based on the some constraint conditions, this paper put forward a strict definition of discrete lines, building a mathematic model of the discrete lines by base vectors combination method. Transforming mesh discrete lines issue in n-dimensional grids into the issue of optimal deviated path in n-minus-one dimension using hyperplane, which, therefore realizing dimension reduction process in the expression of mesh discrete lines. On this basis, we designed a simple and efficient algorithm for dimension reduction and generation of the discrete lines. The experimental results show that our algorithm not only can be applied in the two-dimensional rectangular grid, also can be applied in the two-dimensional hexagonal grid and the three-dimensional cubic grid. Meanwhile, when our algorithm is applied in two-dimensional rectangular grid, it can get a discrete line which is more similar to the line in the Euclidean space.

  13. Simple multifunction discriminator for multichannel triggers

    International Nuclear Information System (INIS)

    Maier, M.R.

    1982-10-01

    A simple version of a multifunction timing discriminator using only two integrated circuits is presented. It can be configured as a leading edge, a constant fraction, a zero cross or a dual threshold timing discriminator. Since so few parts are used, it is well suited for building multichannel timing discriminators. Two versions of this circuit are described: a quadruple multifunction discriminator and an octal constant fraction trigger. The different compromises made in these units are discussed. Results for walk and jitter obtained with these are presented and possible improvements are disussed

  14. Desiccant cooling system performance: A simple approach

    Science.gov (United States)

    Epstein, M.; Grolmes, M. A.

    1982-10-01

    The wave nature of heat and mass transfer in fixed desiccant bed adsorption is explained. A simple algebraic model of wave motion under single low desiccant bed operation is developed and applied to the prediction of the performance potential of the overall desiccant cooling system. The model is used to explain the increase in cooling system performance that is realized through the use of mixed inert desiccant material adsorption beds. The response of cooling system performance to changes in external process conditions is examined and conclusions are drawn relative to optimization of system characteristics.

  15. Three Spreadsheet Models Of A Simple Pendulum

    Directory of Open Access Journals (Sweden)

    Jan Benacka

    2008-10-01

    Full Text Available The paper gives three spreadsheet models of simple pendulum motion. In two of them, the graph of the pendulum angle is drawn upon the exact integral solution using numeric integration – the simpler model only uses spreadsheet functions, the general model uses a VBA program. The period results directly from the calculations. In the third model, the period is calculated first using the power series formula. The graph of the pendulum angle is drawn afterwards using Euler’s method of solving differential equations. The error in gravity acceleration if calculated upon the standard cosine approximate formula instead of the exact one is graphed.

  16. A simple assay method for melanosome transfer.

    Science.gov (United States)

    Choi, Hye Ryung; Park, So-Hee; Choi, Jae Woo; Kim, Dong-Seok; Park, Kyung Chan

    2012-02-01

    Pigmentation is induced by production of melanin in specialized organelles termed melanosomes and by transfer of these organelles from melanocytes to surrounding keratinocytes. The chemical basis of melanogenesis is relatively well known but the mechanism of melanosome transfer is not well studied. Various pigmentary disorders and cosmetic applications require the use of depigmenting agents. Currently available topical agents used for the reduction of pigmentation mainly include tyrosinase inhibitors and/or melanocyte-cytotoxic agents. Recently, several agents have been introduced to inhibit melanosome transfer from melanocytes to keratinocytes. However, an experimental model for melanosome transfer is not well established. In this study, a simple assay method using flow cytometry is described.

  17. Communication: Simple liquids' high-density viscosity.

    Science.gov (United States)

    Costigliola, Lorenzo; Pedersen, Ulf R; Heyes, David M; Schrøder, Thomas B; Dyre, Jeppe C

    2018-02-28

    This paper argues that the viscosity of simple fluids at densities above that of the triple point is a specific function of temperature relative to the freezing temperature at the density in question. The proposed viscosity expression, which is arrived at in part by reference to the isomorph theory of systems with hidden scale invariance, describes computer simulations of the Lennard-Jones system as well as argon and methane experimental data and simulation results for an effective-pair-potential model of liquid sodium.

  18. Communication: Simple liquids' high-density viscosity

    Science.gov (United States)

    Costigliola, Lorenzo; Pedersen, Ulf R.; Heyes, David M.; Schrøder, Thomas B.; Dyre, Jeppe C.

    2018-02-01

    This paper argues that the viscosity of simple fluids at densities above that of the triple point is a specific function of temperature relative to the freezing temperature at the density in question. The proposed viscosity expression, which is arrived at in part by reference to the isomorph theory of systems with hidden scale invariance, describes computer simulations of the Lennard-Jones system as well as argon and methane experimental data and simulation results for an effective-pair-potential model of liquid sodium.

  19. Simple models of equilibrium and nonequilibrium phenomena

    International Nuclear Information System (INIS)

    Lebowitz, J.L.

    1987-01-01

    This volume consists of two chapters of particular interest to researchers in the field of statistical mechanics. The first chapter is based on the premise that the best way to understand the qualitative properties that characterize many-body (i.e. macroscopic) systems is to study 'a number of the more significant model systems which, at least in principle are susceptible of complete analysis'. The second chapter deals exclusively with nonequilibrium phenomena. It reviews the theory of fluctuations in open systems to which they have made important contributions. Simple but interesting model examples are emphasised

  20. Chaos from simple models to complex systems

    CERN Document Server

    Cencini, Massimo; Vulpiani, Angelo

    2010-01-01

    Chaos: from simple models to complex systems aims to guide science and engineering students through chaos and nonlinear dynamics from classical examples to the most recent fields of research. The first part, intended for undergraduate and graduate students, is a gentle and self-contained introduction to the concepts and main tools for the characterization of deterministic chaotic systems, with emphasis to statistical approaches. The second part can be used as a reference by researchers as it focuses on more advanced topics including the characterization of chaos with tools of information theor

  1. Simple Unawareness in Dynamic Psychological Games

    DEFF Research Database (Denmark)

    Nielsen, Carsten Søren; Sebald, Alexander Christopher

    2017-01-01

    Building on Battigalli and Dufwenberg (2009)’s framework of dynamic psychological games and the progress in the modeling of dynamic unawareness by Heifetz, Meier, and Schipper (2013a) we model and analyze the impact of asymmetric awareness in the strategic interaction of players motivated...... by reciprocity and guilt. Specifically we characterize extensive-form games with psychological payoffs and simple unawareness, define extensive-form rationalizability and, using this, show that unawareness has a pervasive impact on the strategic interaction of psychologically motivated players. Intuitively...

  2. A simple parametric model selection test

    OpenAIRE

    Susanne M. Schennach; Daniel Wilhelm

    2014-01-01

    We propose a simple model selection test for choosing among two parametric likelihoods which can be applied in the most general setting without any assumptions on the relation between the candidate models and the true distribution. That is, both, one or neither is allowed to be correctly speci fied or misspeci fied, they may be nested, non-nested, strictly non-nested or overlapping. Unlike in previous testing approaches, no pre-testing is needed, since in each case, the same test statistic to...

  3. Simple, high current, antimony ion source

    International Nuclear Information System (INIS)

    Sugiura, H.

    1979-01-01

    A simple metal ion source capable of producing a continuous, uncontaminated, high current beam of Sb ions is presented. It produced a total ion current of 200 μA at 1 kV extraction voltage. A discharge occurred in the source at a pressure of 6 x 10 -4 Torr. The ion current extracted from the source increased with the 3/2 power of the extraction voltage. The perveance of the source and ion density in the plasma were 8 x 10 -9 and 1.8 x 10 11 cm -3 , respectively

  4. A Simple Ripple Filter for FLUKA

    DEFF Research Database (Denmark)

    Bassler, Niels; Herrmann, Rochus

    ). The ripple filter at GSI and HIT consists of several wedge like structures, which widens the Bragg-peak up to e.g. 3 mm. For Monte Carlo simulations of C-12 therapy, the exact setup, including the ripple filter needs to be simulated. In the Monte Carlo particle transport program FLUKA, the ripple filter can...... be realized in several ways. The most simplistic version is to apply the ripples as simple triangles. More elaborate version would account for the exact structure, but the drawback is that this will bloat the FLUKA input file with vast amounts of bodys which needs to be included in the geometrical setup...

  5. A simple electron-beam lithography system

    DEFF Research Database (Denmark)

    Mølhave, Kristian; Madsen, Dorte Nørgaard; Bøggild, Peter

    2005-01-01

    A large number of applications of electron-beam lithography (EBL) systems in nanotechnology have been demonstrated in recent years. In this paper we present a simple and general-purpose EBL system constructed by insertion of an electrostatic deflector plate system at the electron-beam exit...... of the column of a scanning electron microscope (SEM). The system can easily be mounted on most standard SEM systems. The tested setup allows an area of up to about 50 x 50 pm to be scanned, if the upper limit for acceptable reduction of the SEM resolution is set to 10 run. We demonstrate how the EBL system can...

  6. Design of Simple Landslide Monitoring System

    Science.gov (United States)

    Meng, Qingjia; Cai, Lingling

    2018-01-01

    The simple landslide monitoring system is mainly designed for slope, collapse body and surface crack. In the harsh environment, the dynamic displacement data of the disaster body is transmitted to the terminal acquisition system in real time. The main body of the system adopt is PIC32MX795F512. This chip is to realize low power design, wakes the system up through the clock chip, and turns on the switching power supply at set time, which makes the wireless transmission module running during the interval to ensure the maximum battery consumption, so that the system can be stable long term work.

  7. Fourier's law: insight from a simple derivation.

    Science.gov (United States)

    Dubi, Y; Di Ventra, M

    2009-04-01

    The onset of Fourier's law in a one-dimensional quantum system is addressed via a simple model of weakly coupled quantum systems in contact with thermal baths at their edges. Using analytical arguments we show that the crossover from the ballistic (invalid Fourier's law) to diffusive (valid Fourier's law) regimes is characterized by a thermal length scale, which is directly related to the profile of the local temperature. In the same vein, dephasing is shown to give rise to classical Fourier's law, similarly to the onset of Ohm's law in mesoscopic conductors.

  8. Current-induced forces: a simple derivation

    DEFF Research Database (Denmark)

    Todorov, Tchavdar N.; Dundas, Daniel; Lü, Jing-Tao

    2014-01-01

    We revisit the problem of forces on atoms under current in nanoscale conductors. We derive and discuss the five principal kinds of force under steady-state conditions from a simple standpoint that-with the help of background literature-should be accessible to physics undergraduates. The discussion...... aims at combining methodology with an emphasis on the underlying physics through examples. We discuss and compare two forces present only under current-the non-conservative electron wind force and a Lorentz-like velocity-dependent force. It is shown that in metallic nanowires both display significant...

  9. Magnetostriction in a simple trivalent manganese perovskite

    Science.gov (United States)

    Hunter, Brett A.; Kennedy, Brendan J.; Vogt, Tom

    2004-01-01

    We found an unusual negative thermal expansion in the simple perovskite MnF3 below the Neel point, where the spins are ordered in an A-type magnetic structure. The structure of MnF3 has been studied between 5 and 500 K using powder neutron and synchrotron diffraction. The structure remains monoclinic C2/c over the entire temperature range. We have found that the interplay of spin and orbital ordering is sufficient to result in a large positive magnetovolume effect without charge ordering. This expansion is reminiscent of the Invar effect observed in certain alloys.

  10. Simple Synthesis Method for Alumina Nanoparticle

    Directory of Open Access Journals (Sweden)

    Daniel Damian

    2017-11-01

    Full Text Available Globally, the human population steady increase, expansion of urban areas, excessive industrialization including in agriculture, caused not only decrease to depletion of non-renewable resources, a rapid deterioration of the environment with negative impact on water quality, soil productivity and of course quality of life in general. This paper aims to prepare size controlled nanoparticles of aluminum oxide using a simple synthesis method. The morphology and dimensions of nanomaterial was investigated using modern analytical techniques: SEM/EDAX and XRD spectroscopy.

  11. Simple volatility test for bituminous materials

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, J.A.

    1980-04-01

    A simple, inexpensive test measuring the volatility or fuming propensity of bituminous materials with good repeatability has been devised. The test depends on measuring the mass loss which occurs when a small sample of the material is heated in a shallow open dish on a thermostatic hotplate for a fixed time. A rectilinear inverse relation between the mass losses and the softening points of a series of pitches from one source has been found, and the test has been shown to give results which correlate well with other methods for characterizing pitch volatility. Test results obtained with a range of tar products from pitches to creosotes all showed similarly good repeatability. (4 refs.)

  12. Crystal nucleation in simple and complex fluids.

    Science.gov (United States)

    Oxtoby, David W

    2003-03-15

    The application of density-functional methods from statistical mechanics to the nucleation of crystals from the melt is described. Simple fluids such as metals, with sizes comparable with the range of their attractive forces, are compared with complex fluids such as colloidal suspensions and proteins dissolved in solution. A different mechanism for crystal nucleation is proposed in the latter case, in which density (concentration) changes before periodic crystalline order appears. This leads to a theoretical foundation for empirical observations on the 'crystallization window' in protein crystallization. Comparisons are made with the results of computer simulation via molecular dynamics.

  13. Optimization of line configuration and balancing for flexible machining lines

    Science.gov (United States)

    Liu, Xuemei; Li, Aiping; Chen, Zurui

    2016-05-01

    Line configuration and balancing is to select the type of line and allot a given set of operations as well as machines to a sequence of workstations to realize high-efficiency production. Most of the current researches for machining line configuration and balancing problems are related to dedicated transfer lines with dedicated machine workstations. With growing trends towards great product variety and fluctuations in market demand, dedicated transfer lines are being replaced with flexible machining line composed of identical CNC machines. This paper deals with the line configuration and balancing problem for flexible machining lines. The objective is to assign operations to workstations and find the sequence of execution, specify the number of machines in each workstation while minimizing the line cycle time and total number of machines. This problem is subject to precedence, clustering, accessibility and capacity constraints among the features, operations, setups and workstations. The mathematical model and heuristic algorithm based on feature group strategy and polychromatic sets theory are presented to find an optimal solution. The feature group strategy and polychromatic sets theory are used to establish constraint model. A heuristic operations sequencing and assignment algorithm is given. An industrial case study is carried out, and multiple optimal solutions in different line configurations are obtained. The case studying results show that the solutions with shorter cycle time and higher line balancing rate demonstrate the feasibility and effectiveness of the proposed algorithm. This research proposes a heuristic line configuration and balancing algorithm based on feature group strategy and polychromatic sets theory which is able to provide better solutions while achieving an improvement in computing time.

  14. The Assembly Line Enzymology of Polyketide Biosynthesis.

    Science.gov (United States)

    Till, Marisa; Race, Paul R

    2016-01-01

    Polyketides are a structurally and functionally diverse family of bioactive natural products that have found widespread application as pharmaceuticals, agrochemicals, and veterinary medicines. In bacteria complex polyketides are biosynthesized by giant multifunctional megaenzymes, termed modular polyketide synthases (PKSs), which construct their products in a highly coordinated assembly line-like fashion from a pool of simple precursor substrates. Not only is the multifaceted enzymology of PKSs a fascinating target for study, but it also presents considerable opportunities for the reengineering of these systems affording access to functionally optimized unnatural natural products. Here we provide an introductory primer to modular polyketide synthase structure and function, and highlight recent advances in the characterization and exploitation of these systems.

  15. Introduction to the Bash Command Line

    Directory of Open Access Journals (Sweden)

    Ian Milligan

    2014-09-01

    Full Text Available This lesson uses a Unix shell, which is a command-line interpreter that provides a user interface for the Unix operating system and for Unix-like systems. This lesson will cover a small number of basic commands. By the end of this tutorial you will be able to navigate through your file system and find files, open them, perform basic data manipulation tasks such as combining and copying files, as well as both reading them and making relatively simple edits. These commands constitute the building blocks upon which more complex commands can be constructed to fit your research data or project. Readers wanting a reference guide that goes beyond this lesson are recommended to read Deborah S. Ray and Eric J. Ray, Unix and Linux: Visual Quickstart Guide, 4th edition (2009.

  16. Metadata Analysis at the Command-Line

    Directory of Open Access Journals (Sweden)

    Mark Phillips

    2013-01-01

    Full Text Available Over the past few years the University of North Texas Libraries' Digital Projects Unit (DPU has developed a set of metadata analysis tools, processes, and methodologies aimed at helping to focus limited quality control resources on the areas of the collection where they might have the most benefit. The key to this work lies in its simplicity: records harvested from OAI-PMH-enabled digital repositories are transformed into a format that makes them easily parsable using traditional Unix/Linux-based command-line tools. This article describes the overall methodology, introduces two simple open-source tools developed to help with the aforementioned harvesting and breaking, and provides example commands to demonstrate some common metadata analysis requests. All software tools described in the article are available with an open-source license via the author's GitHub account.

  17. On-line filtering

    International Nuclear Information System (INIS)

    Verkerk, C.

    1978-01-01

    Present day electronic detectors used in high energy physics make it possible to obtain high event rates and it is likely that future experiments will face even higher data rates than at present. The complexity of the apparatus increases very rapidly with time and also the criteria for selecting desired events become more and more complex. So complex in fact that the fast trigger system cannot be designed to fully cope with it. The interesting events become thus contaminated with multitudes of uninteresting ones. To distinguish the 'good' events from the often overwhelming background of other events one has to resort to computing techniques. Normally this selection is made in the first part of the analysis of the events, analysis normally performed on a powerful scientific computer. This implies however that many uninteresting or background events have to be recorded during the experiment for subsequent analysis. A number of undesired consequences result; and these constitute a sufficient reason for trying to perform the selection at an earlier stage, in fact ideally before the events are recorded on magnetic tape. This early selection is called 'on-line filtering' and it is the topic of the present lectures. (Auth.)

  18. Bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  19. Alternate Double Single Track Lines

    Energy Technology Data Exchange (ETDEWEB)

    Moraga Contreras, P.; Grande Andrade, Z.; Castillo Ron, E.

    2016-07-01

    The paper discusses the advantages and shortcomings of alternate double single track (ADST) lines with respect to double track lines for high speed lines. ADST lines consists of sequences of double and single track segments optimally selected in order to reduce the construction and maintenance costs of railway lines and to optimize the timetables used to satisfy a given demand. The single tracks are selected to coincide with expensive segments (tunnels and viaducts) and the double tracks are chosen to coincide with flat areas and only where they are necessary. At the same time, departure times are adjusted for trains to cross at the cheap double track segments. This alternative can be used for new lines and also for existing conventional lines where some new tracks are to be constructed to reduce travel time (increase speed). The ADST proposal is illustrated with some examples of both types (new lines and where conventional lines exist), including the Palencia-Santander, the Santiago-Valparaíso-Viña del Mar and the Dublin-Belfast lines, where very important reductions (90 %) are obtained, especially where a railway infrastructure already exist. (Author)

  20. PLANAR MECHANISMS USED FOR GENERATING CURVE LINE TRANSLATION MOTION

    Directory of Open Access Journals (Sweden)

    Ovidiu ANTONESCU

    2015-05-01

    Full Text Available The curve line translation motion can be generated in the particular form of the circular translation, through mono-mobile mechanisms with articulated links of simple parallelogram type (with a fixed side or through transmission with toothed belt with a fixed wheel. Also, the circular translation can be generated through planar mechanisms with two cylindrical gears with a fixed central wheel. It is mentioned that the two cylindrical gearings of the Fergusson mechanisms are both exterior and interior.

  1. On the finite line source problem in diffusion theory

    International Nuclear Information System (INIS)

    Mikkelsen, T.; Troen, I.; Larsen, S.E.

    1981-09-01

    A simple formula for calculating dispersion from a continuous finite line source, placed at right angles to the mean wind direction, is derived on the basis of statistical theory. Comparison is made with the virtual source concept usually used and this is shown to be correct only in the limit where the virtual time lag Tsub(v) is small compared to the timescale of the turbulence tsub(l). (Auth.)

  2. Investigating student understanding of simple harmonic motion

    Science.gov (United States)

    Somroob, S.; Wattanakasiwich, P.

    2017-09-01

    This study aimed to investigate students’ understanding and develop instructional material on a topic of simple harmonic motion. Participants were 60 students taking a course on vibrations and wave and 46 students taking a course on Physics 2 and 28 students taking a course on Fundamental Physics 2 on the 2nd semester of an academic year 2016. A 16-question conceptual test and tutorial activities had been developed from previous research findings and evaluated by three physics experts in teaching mechanics before using in a real classroom. Data collection included both qualitative and quantitative methods. Item analysis and whole-test analysis were determined from student responses in the conceptual test. As results, most students had misconceptions about restoring force and they had problems connecting mathematical solutions to real motions, especially phase angle. Moreover, they had problems with interpreting mechanical energy from graphs and diagrams of the motion. These results were used to develop effective instructional materials to enhance student abilities in understanding simple harmonic motion in term of multiple representations.

  3. Trophic dynamics of a simple model ecosystem.

    Science.gov (United States)

    Bell, Graham; Fortier-Dubois, Étienne

    2017-09-13

    We have constructed a model of community dynamics that is simple enough to enumerate all possible food webs, yet complex enough to represent a wide range of ecological processes. We use the transition matrix to predict the outcome of succession and then investigate how the transition probabilities are governed by resource supply and immigration. Low-input regimes lead to simple communities whereas trophically complex communities develop when there is an adequate supply of both resources and immigrants. Our interpretation of trophic dynamics in complex communities hinges on a new principle of mutual replenishment, defined as the reciprocal alternation of state in a pair of communities linked by the invasion and extinction of a shared species. Such neutral couples are the outcome of succession under local dispersal and imply that food webs will often be made up of suites of trophically equivalent species. When immigrants arrive from an external pool of fixed composition a similar principle predicts a dynamic core of webs constituting a neutral interchange network, although communities may express an extensive range of other webs whose membership is only in part predictable. The food web is not in general predictable from whole-community properties such as productivity or stability, although it may profoundly influence these properties. © 2017 The Author(s).

  4. A Simple Test for Causality in Volatility

    Directory of Open Access Journals (Sweden)

    Chia-Lin Chang

    2017-03-01

    Full Text Available An early development in testing for causality (technically, Granger non-causality in the conditional variance (or volatility associated with financial returns was the portmanteau statistic for non-causality in the variance of Cheng and Ng (1996. A subsequent development was the Lagrange Multiplier (LM test of non-causality in the conditional variance by Hafner and Herwartz (2006, who provided simulation results to show that their LM test was more powerful than the portmanteau statistic for sample sizes of 1000 and 4000 observations. While the LM test for causality proposed by Hafner and Herwartz (2006 is an interesting and useful development, it is nonetheless arbitrary. In particular, the specification on which the LM test is based does not rely on an underlying stochastic process, so the alternative hypothesis is also arbitrary, which can affect the power of the test. The purpose of the paper is to derive a simple test for causality in volatility that provides regularity conditions arising from the underlying stochastic process, namely a random coefficient autoregressive process, and a test for which the (quasi- maximum likelihood estimates have valid asymptotic properties under the null hypothesis of non-causality. The simple test is intuitively appealing as it is based on an underlying stochastic process, is sympathetic to Granger’s (1969, 1988 notion of time series predictability, is easy to implement, and has a regularity condition that is not available in the LM test.

  5. Training nuclei detection algorithms with simple annotations

    Directory of Open Access Journals (Sweden)

    Henning Kost

    2017-01-01

    Full Text Available Background: Generating good training datasets is essential for machine learning-based nuclei detection methods. However, creating exhaustive nuclei contour annotations, to derive optimal training data from, is often infeasible. Methods: We compared different approaches for training nuclei detection methods solely based on nucleus center markers. Such markers contain less accurate information, especially with regard to nuclear boundaries, but can be produced much easier and in greater quantities. The approaches use different automated sample extraction methods to derive image positions and class labels from nucleus center markers. In addition, the approaches use different automated sample selection methods to improve the detection quality of the classification algorithm and reduce the run time of the training process. We evaluated the approaches based on a previously published generic nuclei detection algorithm and a set of Ki-67-stained breast cancer images. Results: A Voronoi tessellation-based sample extraction method produced the best performing training sets. However, subsampling of the extracted training samples was crucial. Even simple class balancing improved the detection quality considerably. The incorporation of active learning led to a further increase in detection quality. Conclusions: With appropriate sample extraction and selection methods, nuclei detection algorithms trained on the basis of simple center marker annotations can produce comparable quality to algorithms trained on conventionally created training sets.

  6. Ferroelectricity in wurtzite structure simple chalcogenide

    Science.gov (United States)

    Moriwake, Hiroki; Konishi, Ayako; Ogawa, Takafumi; Fujimura, Koji; Fisher, Craig A. J.; Kuwabara, Akihide; Shimizu, Takao; Yasui, Shintaro; Itoh, Mitsuru

    2014-06-01

    The possibility of the new class ferroelectric materials of wurtzite structure simple chalcogenide was discussed using modern first-principles calculation technique. Ferroelectricity in the wurtzite structure (P63mc) can be understood by structure distortion from centrosymmetric P63/mmc by relative displacement of cation against anion along c-axis. Calculated potential surface of these compounds shows typical double well between two polar variants. The potential barriers for the ferroelectric polarization switching were estimated to be 0.25 eV/f.u. for ZnO. It is slightly higher energy to the common perovskite ferroelectric compound PbTiO3. Epitaxial tensile strain on the ab-plane (0001) is effective to lower the potential barrier. The potential barrier decreased from 0.25 to 0.15 eV/f.u. by 5% ab-plane expansion in wurtzite structure ZnO. Epitaxial ZnO thin film with donor type defect reduction should be a possible candidate to confirm this ferroelectricity in wurtzite structure simple chalcogenide.

  7. Simple Coatings to Render Polystyrene Protein Resistant

    Directory of Open Access Journals (Sweden)

    Marcelle Hecker

    2018-02-01

    Full Text Available Non-specific protein adsorption is detrimental to the performance of many biomedical devices. Polystyrene is a commonly used material in devices and thin films. Simple reliable surface modification of polystyrene to render it protein resistant is desired in particular for device fabrication and orthogonal functionalisation schemes. This report details modifications carried out on a polystyrene surface to prevent protein adsorption. The trialed surfaces included Pluronic F127 and PLL-g-PEG, adsorbed on polystyrene, using a polydopamine-assisted approach. Quartz crystal microbalance with dissipation (QCM-D results showed only short-term anti-fouling success of the polystyrene surface modified with F127, and the subsequent failure of the polydopamine intermediary layer in improving its stability. In stark contrast, QCM-D analysis proved the success of the polydopamine assisted PLL-g-PEG coating in preventing bovine serum albumin adsorption. This modified surface is equally as protein-rejecting after 24 h in buffer, and thus a promising simple coating for long term protein rejection of polystyrene.

  8. A computationally simple method for cost-efficient generation rescheduling and load shedding for congestion management

    Energy Technology Data Exchange (ETDEWEB)

    Talukdar, B.K.; Sinha, A.K.; Mukhopadhyay, S. [Indian Inst. of Technology, Dept. of Electrical Engineering, Kharagpur (India); Bose, A. [Washington State Univ., Pullman, WA (United States)

    2005-07-01

    This paper describes a method of congestion management by generation rescheduling and load shedding. The sensitivities of the overloaded lines to bus injections and the costs of generation and load shedding are considered for ranking the generation and load buses. The new generation and load shedding schedule for these buses are then computed based on a simple method considering cost and sensitivity to line currents. The algorithm will help the system operator to generate the contingency plan quickly for secure operation of the system. Test results for three systems are presented. The results show that cost effective generation rescheduling and load shedding plans can be obtained to alleviate overloading of the transmission lines in a computationally efficient manner. (Author)

  9. Development of specific simple sequence repeat (SSR) markers for ...

    African Journals Online (AJOL)

    use

    2011-11-21

    sensitive genic male sterility (TGMS) lines. In this study, a TGMS line showing non-pollen type thermo-sensitive genic male sterility was used. Crossing between TGMS line (female parent) and normal pollen varieties; CNT1 and.

  10. In-line Fiber Polarizer

    OpenAIRE

    Perumalsamy, Priya

    1998-01-01

    Polarizers and polarization devices are important components in fiber optic communication and sensor systems. There is a growing need for efficient low loss components that are compatible with optical fibers. An all fiber in-line polarizer is a more desirable alternative that could be placed at appropriate intervals along communication links. An in-line fiber polarizer was fabricated and tested. The in-line fiber polarizer operates by coupling optical energy propagatin...

  11. Structure of Lefschetz thimbles in simple fermionic systems

    Energy Technology Data Exchange (ETDEWEB)

    Kanazawa, Takuya [iTHES Research Group and Quantum Hadron Physics Laboratory,RIKEN, Wako, Saitama 351-0198 (Japan); Tanizaki, Yuya [Department of Physics, The University of Tokyo,Tokyo 113-0033 (Japan); Theoretical Research Division, Nishina Center, RIKEN,Wako, Saitama 351-0198 (Japan)

    2015-03-10

    The Picard-Lefschetz theory offers a promising tool to solve the sign problem in QCD and other field theories with complex path-integral weight. In this paper the Lefschetz-thimble approach is examined in simple fermionic models which share some features with QCD. In zero-dimensional versions of the Gross-Neveu model and the Nambu-Jona-Lasinio model, we study the structure of Lefschetz thimbles and its variation across the chiral phase transition. We map out a phase diagram in the complex four-fermion coupling plane using a thimble decomposition of the path integral, and demonstrate an interesting link between anti-Stokes lines and Lee-Yang zeros. In the case of nonzero mass, it is shown that the approach to the chiral limit is singular because of intricate cancellation between competing thimbles, which implies the necessity to sum up multiple thimbles related by symmetry. We also consider a Chern-Simons theory with fermions in 0+1-dimension and show how Lefschetz thimbles solve the complex phase problem caused by a topological term. These prototypical examples would aid future application of this framework to bona fide QCD.

  12. Multicharged Ion-induced simple molecule fragmentation dynamics

    International Nuclear Information System (INIS)

    Tarisien, M.

    2003-10-01

    The aim of this work is to study the dynamics of swift multicharged ion-induced fragmentation of diatomic (CO) and triatomic (CO 2 ) molecules. Performed at the GANIL facility, this study used the Recoil Ion Momentum Spectroscopy technique (RIMS), which consists of a time-of-flight mass spectrometer, coupled with a multi-hit capability position sensitive detector (delay line anode). The high-resolution measurement of the kinetic energy distribution released (KER) during the CO fragmentation points out the limitation of the Coulomb Explosion Model, revealing, for example, the di-cation CO 2 + electronic state contribution in the case of C + /O + fragmentation pathway. Furthermore, the multi-ionization cross section dependence with the orientation of the internuclear axis of CO is compared with a geometrical model calculation. Finally, different behaviours are observed for the dissociation dynamics of a triatomic molecule (CO 2 ). While triple ionization leads mainly to a synchronous concerted fragmentation dynamics, a weak fraction of dissociating molecule follows a sequential dynamics involving CO 2 + metastable states. In the case of double ionization, (CO 2 ) 2+ di-cation dissociation dynamics is asynchronously concerted and has been interpreted using a simple model involving an asymmetrical vibration of the molecule. (author)

  13. A simple analytical expression to describe tidal damping or amplification

    Science.gov (United States)

    Savenije, H. H. G.

    2001-03-01

    Can a single line describe tidal damping or amplification? Tidal damping and amplification in alluvial estuaries are constrained by an implicit feedback mechanism. The time lag ɛ between the occurrence of high water and high water slack is crucial in this regard. An analytical solution of the St. Venant equations appears to result in a surprisingly simple explicit relation for the tidal range, consisting of an exponential and a linear term. In alluvial estuaries, the linear term is dominant, particularly in the case of tidal amplification. In the case of tidal damping the exponential term only becomes important in the upper reaches of the estuary (preventing the expression for the tidal range from becoming negative). In tidal amplification, the exponential term is suppressed by the newly defined tidal Froude Number which (as it contains sin ɛ) tends to zero when the tidal wave gets a predominantly standing wave character. This negative feedback prevents the development of an exponentially increasing tidal range. Finally, the expression obtained is a very useful explicit equation to determine estuary parameters that are difficult to determine from direct observations, such as the roughness and the mean water depth.

  14. Simple method for generating adjustable trains of picosecond electron bunches

    Directory of Open Access Journals (Sweden)

    P. Muggli

    2010-05-01

    Full Text Available A simple, passive method for producing an adjustable train of picosecond electron bunches is demonstrated. The key component of this method is an electron beam mask consisting of an array of parallel wires that selectively spoils the beam emittance. This mask is positioned in a high magnetic dispersion, low beta-function region of the beam line. The incoming electron beam striking the mask has a time/energy correlation that corresponds to a time/position correlation at the mask location. The mask pattern is transformed into a time pattern or train of bunches when the dispersion is brought back to zero downstream of the mask. Results are presented of a proof-of-principle experiment demonstrating this novel technique that was performed at the Brookhaven National Laboratory Accelerator Test Facility. This technique allows for easy tailoring of the bunch train for a particular application, including varying the bunch width and spacing, and enabling the generation of a trailing witness bunch.

  15. Flow injection analysis with simple chemiluminescence detector for hypoxanthine

    Energy Technology Data Exchange (ETDEWEB)

    Yagiuda, K.; Henmi, A.; Sakamura, K.; Ito, S.; Asano, Y. [DKK Corp., Tokyo (Japan); Hayashi, K. [Nichirei Corp., Tokyo (Japan); Karube, I. [The University of Tokyo, Tokyo (Japan). Research Center for Advanced Science and Technology

    1995-12-05

    A low cost chemiluminescence detector with a photodiode for flow injection analysis (FIA) of hypoxanthine in fish and meat was developed for quality control in food industry. In this system hypoxanthine is oxidized enzymatically to produce hydrogen peroxide during passage through the xanthine oxidase immobilized reactor. Then, chemi-luminescence caused by mixing hydrogen peroxide with chemiluminescence reagent was detected by the flow through photodiode cell that was designed to detect efficiently weak chemiluminescence. This light intensity was proportional to hypoxanthine concentration. As a result a linear working curve was obtained from 2{times}10{sup -7} to 2{times}10{sup -4} mol 1{sup -1} hypoxanthine concentration in this FIA system. The present system with the photodiode detector was applied to the determination of hypoxanthine in fish and meat samples. The results were compared with those obtained by the conventional HPLC method. Analytical results for fish samples obtained by the present FlA method were fairly in good agreement with those obtained by the conventional HPLC method. Correlation factor and regression line between both methods were 0.978 and Y = 0.89X + 0.66 respectively. The present FlA system was concluded to be available as a simple, easy-handling and reliable instrument for quality control in food industry. 16 refs., 5 figs., 1 tab.

  16. The thermodynamics of simple materials with fading memory

    CERN Document Server

    Day, William Alan

    1972-01-01

    This Tract gives an account of certain recent attempts to construct a satisfactory theory of thermodynamics for materials which have a memory for the past. Naturally it draws heavily on the writings of those who have made significant contributions to the field. I am particularly grateful to Professor C. A. Truesdell of The lohns Hopkins University for his invitation to write the Tract and to Professor A. E. Green of Oxford for his comments on various parts of the manuscript. Hertford College, Oxford December 1971 W. A. Day Contents Introduction 1 Chapter 1 Preliminaries 5 1. 1 Vector and Tensor Analysis. 5 1. 2 Paths and Line Integrals . 7 1. 3 Kinematics and the Balance Laws 11 1. 4 Simple Materials with Memory 15 21 Chapter 2 A Theory of Thermodynamics . 2. 1 Processes. 21 2. 2 The Thermodynamic Inequality . 23 2. 3 Heat Conduction Inequalities . 24 2. 4 The Conversion of Heat into Mechanical Work 27 31 The Construction of the Entropy Chapter 3 The Clausius Inequality 31 3. 1 3. 2 Fading Memory . 34 3. 3 Th...

  17. Lines of Best Fit by Graphics and the Wald Line.

    Science.gov (United States)

    Henriksen, Melvin, Ed.; Wagon, Stan, Ed.

    1991-01-01

    Using a graphical analysis of the linear best fit for a set of Cartesian data points, the drawbacks of the least-squares method for determining this best fit are discussed. The Wald Line, which utilizes a variation of the geometric mean, is proposed as the best alternative to the least-squares regression line particularly when the data contain…

  18. Circuit for Communication Over Power Lines

    Science.gov (United States)

    Krasowski, Michael J.; Prokop, Normal F.; Greer, Lawrence C., III; Nappier, Jennifer

    2011-01-01

    Many distributed systems share common sensors and instruments along with a common power line supplying current to the system. A communication technique and circuit has been developed that allows for the simple inclusion of an instrument, sensor, or actuator node within any system containing a common power bus. Wherever power is available, a node can be added, which can then draw power for itself, its associated sensors, and actuators from the power bus all while communicating with other nodes on the power bus. The technique modulates a DC power bus through capacitive coupling using on-off keying (OOK), and receives and demodulates the signal from the DC power bus through the same capacitive coupling. The circuit acts as serial modem for the physical power line communication. The circuit and technique can be made of commercially available components or included in an application specific integrated circuit (ASIC) design, which allows for the circuit to be included in current designs with additional circuitry or embedded into new designs. This device and technique moves computational, sensing, and actuation abilities closer to the source, and allows for the networking of multiple similar nodes to each other and to a central processor. This technique also allows for reconfigurable systems by adding or removing nodes at any time. It can do so using nothing more than the in situ power wiring of the system.

  19. A simple solution to type specialization

    DEFF Research Database (Denmark)

    Danvy, Olivier

    1998-01-01

    all over. Neil Jones has stated that getting rid of these type tags was an open problem, despite possible solutions such as Torben Mogensen's “constructor specialization.” To solve this problem, John Hughes has proposed a new paradigm for partial evaluation, “Type Specialization”, based on type...... inference instead of being based on symbolic interpretation. Type Specialization is very elegant in principle but it also appears non-trivial in practice. Stating the problem in terms of types instead of in terms of type encodings suggests a very simple type-directed solution, namely, to use a projection......Partial evaluation specializes terms, but traditionally this specialization does not apply to the type of these terms. As a result, specializing, e.g., an interpreter written in a typed language, which requires a “universal” type to encode expressible values, yields residual programs with type tags...

  20. A Simple Solution to Type Specialization

    DEFF Research Database (Denmark)

    Danvy, Olivier

    1998-01-01

    all over. Neil Jones has stated that getting rid of these type tags was an open problem, despite possible solutions such as Torben Mogensen's “constructor specialization.” To solve this problem, John Hughes has proposed a new paradigm for partial evaluation, “Type Specialization”, based on type...... inference instead of being based on symbolic interpretation. Type Specialization is very elegant in principle but it also appears non-trivial in practice. Stating the problem in terms of types instead of in terms of type encodings suggests a very simple type-directed solution, namely, to use a projection......Partial evaluation specializes terms, but traditionally this specialization does not apply to the type of these terms. As a result, specializing, e.g., an interpreter written in a typed language, which requires a “universal” type to encode expressible values, yields residual programs with type tags...

  1. Interactions between simple radicals and water

    International Nuclear Information System (INIS)

    Crespo-Otero, Rachel; Sanchez-Garcia, Elsa; Suardiaz, Reynier; Montero, Luis A.; Sander, Wolfram

    2008-01-01

    The interactions of the simple radicals CH 3 , NH 2 , OH, and F with water have been studied by DFT (UB3LYP/6-311++G(2d,2p)) and ab initio (RHF-UCCSD(T)/6-311++G(2d,2p)) methods. In this order the number of lone pairs (from zero to three), the electronegativity, and the strength of the X-H bonds increase (X = C, N, and O). The various minima of the radical-water complexes were located using the multiple minima hypersurface (MMH) approach which had previously been proven to be useful for closed-shell molecules. The role of the unpaired electron in hydrogen bonding was investigated using the natural bond orbital (NBO) analysis. A considerable contribution of the unpaired electron to the complex stabilization was only found for the methyl radical and the fluorine atom, whereas in the aminyl and the hydroxyl radical the role of the unpaired electron is negligible

  2. A simple model of bank bankruptcies

    Science.gov (United States)

    Aleksiejuk, Agata; Hołyst, Janusz A.

    2001-10-01

    Interbank deposits (loans and credits) are quite common in banking system all over the world. Such interbank co-operation is profitable for banks but it can also lead to collective financial failures. In this paper, we introduce a new model of directed percolation as a simple representation for contagion process and mass bankruptcies in banking systems. Directed connections that are randomly distributed between junctions of bank lattice simulate flows of money in our model. Critical values of a mean density of interbank connections as well as static and dynamic scaling laws for the statistics of avalanche bankruptcies are found. Results of computer simulations for the universal profile of bankruptcies spreading are in a qualitative agreement with the third wave of bank suspensions during The Great Depression in USA.

  3. Special relativity as a simple geometry problem

    International Nuclear Information System (INIS)

    Abreu, Rodrigo de; Guerra, Vasco

    2009-01-01

    The null result of the Michelson-Morley experiment and the constancy of the one-way speed of light in the 'rest system' are used to formulate a simple problem, to be solved by elementary geometry techniques using a pair of compasses and non-graduated rulers. The solution consists of a drawing allowing a direct visualization of all the fundamental effects of standard relativistic kinematics, namely time dilation, length contraction and relativity of simultaneity. Moreover, it also provides an immediate image of other important and more subtle aspects, often passed by in relativity courses, such as the conventionality of simultaneity thesis, possible non-invariance of the one-way speed of light and compatibility between the Lorentz-Poincare and Einstein-Minkowski philosophies. The geometric scheme so constructed constitutes a powerful tool to clearly illustrate both traditional and not-so-traditional aspects of special relativity teaching

  4. Multiple equilibria in a simple elastocapillary system

    KAUST Repository

    Taroni, Michele

    2012-09-28

    We consider the elastocapillary interaction of a liquid drop placed between two elastic beams, which are both clamped at one end to a rigid substrate. This is a simple model system relevant to the problem of surface-tension-induced collapse of flexible micro-channels that has been observed in the manufacture of microelectromechanical systems (MEMS). We determine the conditions under which the beams remain separated, touch at a point, or stick along a portion of their length. Surprisingly, we show that in many circumstances multiple equilibrium states are possible. We develop a lubrication-type model for the flow of liquid out of equilibrium and thereby investigate the stability of the multiple equilibria. We demonstrate that for given material properties two stable equilibria may exist, and show via numerical solutions of the dynamic model that it is the initial state of the system that determines which stable equilibrium is ultimately reached. © 2012 Cambridge University Press.

  5. Centralizers in simple locally finite groups

    Directory of Open Access Journals (Sweden)

    Mahmut Kuzucuoğlu

    2013-03-01

    Full Text Available This is a survey article on centralizers of finitesubgroups in locally finite, simple groups or LFS-groups as wewill call them. We mention some of the open problems aboutcentralizers of subgroups in LFS-groups and applications of theknown information about the centralizers of subgroups to thestructure of the locally finite group. We also prove thefollowing: Let $G$ be a countably infinite non-linear LFS-groupwith a Kegel sequence $mathcal{K}={(G_i,N_i | iinmathbf{N} }$. If there exists an upper bound for ${ |N_i| |iin mathbf{N} }$, then for any finite semisimplesubgroup $F$ in $G$ the subgroup $C_G(F$ has elements oforder $p_i$ for infinitely many distinct prime $p_i$. Inparticular $C_G(F$ is an infinite group. This answers Hartley'squestion provided that there exists a bound on ${ |N_i| | iin mathbf{N}$.

  6. A simple electron-beam lithography system

    International Nuclear Information System (INIS)

    Moelhave, Kristian; Madsen, Dorte Noergaard; Boeggild, Peter

    2005-01-01

    A large number of applications of electron-beam lithography (EBL) systems in nanotechnology have been demonstrated in recent years. In this paper we present a simple and general-purpose EBL system constructed by insertion of an electrostatic deflector plate system at the electron-beam exit of the column of a scanning electron microscope (SEM). The system can easily be mounted on most standard SEM systems. The tested setup allows an area of up to about 50x50 μm to be scanned, if the upper limit for acceptable reduction of the SEM resolution is set to 10 nm. We demonstrate how the EBL system can be used to write three-dimensional nanostructures by electron-beam deposition

  7. A simple nonlinear dynamical computing device

    International Nuclear Information System (INIS)

    Miliotis, Abraham; Murali, K.; Sinha, Sudeshna; Ditto, William L.; Spano, Mark L.

    2009-01-01

    We propose and characterize an iterated map whose nonlinearity has a simple (i.e., minimal) electronic implementation. We then demonstrate explicitly how all the different fundamental logic gates can be implemented and morphed using this nonlinearity. These gates provide the full set of gates necessary to construct a general-purpose, reconfigurable computing device. As an example of how such chaotic computing devices can be exploited, we use an array of these maps to encode data and to process information. Each map can store one of M items, where M is variable and can be large. This nonlinear hardware stores data naturally in different bases or alphabets. We also show how this method of storing information can serve as a preprocessing tool for exact or inexact pattern-matching searches.

  8. Learning from correlated patterns by simple perceptrons

    Science.gov (United States)

    Shinzato, Takashi; Kabashima, Yoshiyuki

    2009-01-01

    Learning behavior of simple perceptrons is analyzed for a teacher-student scenario in which output labels are provided by a teacher network for a set of possibly correlated input patterns, and such that the teacher and student networks are of the same type. Our main concern is the effect of statistical correlations among the input patterns on learning performance. For this purpose, we extend to the teacher-student scenario a methodology for analyzing randomly labeled patterns recently developed in Shinzato and Kabashima 2008 J. Phys. A: Math. Theor. 41 324013. This methodology is used for analyzing situations in which orthogonality of the input patterns is enhanced in order to optimize the learning performance.

  9. iPad 2 Made Simple

    CERN Document Server

    Mazo, Gary; Ritchie, Rene

    2011-01-01

    The iPad 2 is thinner, more powerful, intuitive and very fun for users of all ages. Your iPad can be used for reading, surfing the web, emailing, watching TV and movies, getting work done and much more. And with over 65,000 apps just for the iPad, as well as the ability to run over 30,000 iPhone apps, the possibilities are endless. iPad 2 Made Simple clarifies all of the key features on the iPad, introduces what's new, and also reveals dozens of time-saving shortcuts and techniques. The book has over 1,000 screen shots that are carefully annotated with step-by-step instructions. * Clear instru

  10. Efficient quantum pseudorandomness with simple graph states

    Science.gov (United States)

    Mezher, Rawad; Ghalbouni, Joe; Dgheim, Joseph; Markham, Damian

    2018-02-01

    Measurement based (MB) quantum computation allows for universal quantum computing by measuring individual qubits prepared in entangled multipartite states, known as graph states. Unless corrected for, the randomness of the measurements leads to the generation of ensembles of random unitaries, where each random unitary is identified with a string of possible measurement results. We show that repeating an MB scheme an efficient number of times, on a simple graph state, with measurements at fixed angles and no feedforward corrections, produces a random unitary ensemble that is an ɛ -approximate t design on n qubits. Unlike previous constructions, the graph is regular and is also a universal resource for measurement based quantum computing, closely related to the brickwork state.

  11. Simple LDAP Schemas for Grid Monitoring

    Science.gov (United States)

    Smith, Warren; Gunter, Dan; Biegel, Bryan (Technical Monitor)

    2001-01-01

    The purpose of this document is to provide an initial definition of the data we need in a directory service or database so that we can implement a performance monitoring testbed. To begin with, this document describes how to represent producers of events and event schemes. The representation of producers is simple and does not contain information such as who has access to the events and what protocols can be used to access the events. In the future, we will define how to describe consumers of events and add details to our representations. A popular choice for a directory service or database for grid computing is a distributed directory service that is accessed using the Lightweight Directory Access Protocol (LDAP). This document uses LDAP terminology, schemes, and formats to represent the directory service schemes.

  12. Simple Resonance Hierarchy for Surmounting Quantum Uncertainty

    International Nuclear Information System (INIS)

    Amoroso, Richard L.

    2010-01-01

    For a hundred years violation or surmounting the Quantum Uncertainty Principle has remained a Holy Grail of both theoretical and empirical physics. Utilizing an operationally completed form of Quantum Theory cast in a string theoretic Higher Dimensional (HD) form of Dirac covariant polarized vacuum with a complex Einstein energy dependent spacetime metric, M 4 ±C 4 with sufficient degrees of freedom to be causally free of the local quantum state, we present a simple empirical model for ontologically surmounting the phenomenology of uncertainty through a Sagnac Effect RF pulsed Laser Oscillated Vacuum Energy Resonance hierarchy cast within an extended form of a Wheeler-Feynman-Cramer Transactional Calabi-Yau mirror symmetric spacetime bachcloth.

  13. Simple Lie groups without the approximation property

    DEFF Research Database (Denmark)

    Haagerup, Uffe; de Laat, Tim

    2013-01-01

    For a locally compact group G, let A(G) denote its Fourier algebra, and let M0A(G) denote the space of completely bounded Fourier multipliers on G. The group G is said to have the Approximation Property (AP) if the constant function 1 can be approximated by a net in A(G) in the weak-∗ topology...... on the space M0A(G). Recently, Lafforgue and de la Salle proved that SL(3,R) does not have the AP, implying the first example of an exact discrete group without it, namely, SL(3,Z). In this paper we prove that Sp(2,R) does not have the AP. It follows that all connected simple Lie groups with finite center...... and real rank greater than or equal to two do not have the AP. This naturally gives rise to many examples of exact discrete groups without the AP....

  14. A simple and realistic triton wave function

    International Nuclear Information System (INIS)

    Lomnitz-Adler, J.; Pandharipande, V.R.

    1980-01-01

    We propose a simple triton wave function that consists of a product of three correlation operators operating on a three-body spin-isospin state. This wave function is formally similar to that used in the recent variational theories of nuclear matter, the main difference being in the long-range behavior of the correlation operators. Variational calculations are carried out with the Reid potential, using this wave function in the so-called 'symmetrized product' and 'independent pair' forms. The triton energy and density distributions obtained with the symmetrized product wave function agree with those obtained in Faddeev and other variational calculations using harmonic oscillator states. The proposed wave function and calculational methods can be easily generalized to treat the four-nucleon α-particle. (orig.)

  15. Learning from correlated patterns by simple perceptrons

    International Nuclear Information System (INIS)

    Shinzato, Takashi; Kabashima, Yoshiyuki

    2009-01-01

    Learning behavior of simple perceptrons is analyzed for a teacher-student scenario in which output labels are provided by a teacher network for a set of possibly correlated input patterns, and such that the teacher and student networks are of the same type. Our main concern is the effect of statistical correlations among the input patterns on learning performance. For this purpose, we extend to the teacher-student scenario a methodology for analyzing randomly labeled patterns recently developed in Shinzato and Kabashima 2008 J. Phys. A: Math. Theor. 41 324013. This methodology is used for analyzing situations in which orthogonality of the input patterns is enhanced in order to optimize the learning performance

  16. Swarming behavior of simple model squirmers

    Energy Technology Data Exchange (ETDEWEB)

    Thutupalli, Shashi; Seemann, Ralf; Herminghaus, Stephan, E-mail: shashi.thutupalli@ds.mpg.de, E-mail: stephan.herminghaus@ds.mpg.de [Max Planck Institute for Dynamics and Self-Organization, Bunsenstrasse 10, 37073 Goettingen (Germany)

    2011-07-15

    We have studied experimentally the collective behavior of self-propelling liquid droplets, which closely mimic the locomotion of some protozoal organisms, the so-called squirmers. For the sake of simplicity, we concentrate on quasi-two-dimensional (2D) settings, although our swimmers provide a fully 3D propulsion scheme. At an areal density of 0.46, we find strong polar correlation of the locomotion velocities of neighboring droplets, which decays over less than one droplet diameter. When the areal density is increased to 0.78, distinct peaks show up in the angular correlation function, which point to the formation of ordered rafts. This shows that pronounced textures, beyond what has been seen in simulations so far, may show up in crowds of simple model squirmers, despite the simplicity of their (purely physical) mutual interaction.

  17. A Simple Sag Generator Using SSRs

    DEFF Research Database (Denmark)

    Senturk, Osman Selcuk; Hava, Ahmet M.

    2010-01-01

    conditions (critical loads) and this property often may not be accommodated inside the device itself and sag compensating power conditioners have been developed for such purposes. While in practice voltage sags are not wanted, generating sags becomes necessary for the purpose of experimentally verifying...... the performances of the equipment (both the equipment under sag condition and the sag compensating power conditioner) under sag conditions. In this work, a simple and economical, yet highly performing sag generator is developed, its design discussed, and its feasibility demonstrated by experiments. The proposed...... SSR (solid state relay, a semiconductor power module of triac characteristics) and variable transformer (variac) based sag generator is built for three-phase 10kVA ratings and balanced/imbalanced voltage sags are demonstrated in the laboratory. The performance under resistive and inductive loads...

  18. A Simple Sag Generator Using SSRs

    DEFF Research Database (Denmark)

    Senturk, Osman Selcuk; Hava, Ahmet M.

    2012-01-01

    conditions (critical loads) and this property often may not be accommodated inside the device itself and sag compensating power conditioners have been developed for such purposes. While in practice voltage sags are not wanted, generating sags becomes necessary for the purpose of experimentally verifying...... the performances of the equipment (both the equipment under sag condition and the sag compensating power conditioner) under sag conditions. In this work, a simple and economical, yet highly performing sag generator is developed, its design discussed, and its feasibility demonstrated by experiments. The proposed...... SSR (solid state relay, a semiconductor power module of triac characteristics) and variable transformer (variac) based sag generator is built for three-phase 10kVA ratings and balanced/imbalanced voltage sags are demonstrated in the laboratory. The performance under resistive and inductive loads...

  19. FSM Model of a Simple Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Martina Latkova

    2015-01-01

    Full Text Available The paper describes a simulation model of a simple photovoltaic system intended as a tool for testing the use of finite state machines for simulations representing a long-term operation of renewable energy sources. The mathematical model of the photovoltaic system is described first. Then it is used to build a finite state machine model that calculates a power output of the photovoltaic system for changing values of a solar irradiance and a temperature. Data measured on a real photovoltaic installation are used to verify model’s accuracy through its comparison with a previously created and verified Matlab model. The finite state machine model presented in this paper was created using Ptolemy II software.

  20. A simple FASTBUS to ethernet interface

    International Nuclear Information System (INIS)

    Baudendistel, K.; Dobinson, R.W.; Downing, R.W.; Herbert, M.J.

    1985-01-01

    Until comparatively recently the effort and the expense of interfacing to Ethernet has been considerable, both in terms of design time and the number of integrated circuits required. However, the appearance of VLSI chip sets from several manufacturers, which perform large parts of the lower level network protocols, has done much to ease this problem. One of the first chip sets available was that manufactured by the SEEQ company of San Jose, California. We have successfully constructed and operated controller boards for the IBM PC using these chips. We report here on an extension of this work to construct a simple interface between FASTBUS and Ethernet. The motivation for the work is twofold; first to make available Ethernet products and services from a FASTBUS environment, secondly to investigate the interconnection of FASTBUS segments over longer distances than is possible using the present cable segment and segment interconnects. The emphasis of this paper is on how the interface appears to a FASTBUS user

  1. A simple nasal anemometer for clinical purposes.

    Science.gov (United States)

    Hutters, B; Brøndsted, K

    1992-01-01

    There is a need for clinical methods which give more direct information about the behaviour of the velopharyngeal mechanism in natural speech than do the examination methods normally applied to patients suffering from velopharyngeal insufficiency. One possibility is the recording of nasal airflow in order to detect nasal emission of air. The purpose of the present study is to examine the qualities and the characteristics of a simple and cheap nasal anemometer. As this type of flowmeter is considered less reliable than most other flowmeters, its limitations must be clearly understood and accounted for in drawing conclusions. Therefore, nasal airflow in speech obtained with this flowmeter is discussed in relation to nasal airflow obtained by the more reliable pneumotachograph and in relation to nasal airflow data found in the literature. The tests made here suggest that, at least for the type of speech material and measurements used in the present study, reliable nasal airflow data can be obtained by the anemometer.

  2. Simple radiographic finding of subacromial impingement syndrome

    International Nuclear Information System (INIS)

    Joo, Sang Shin; Song, In Sub; Lee, Kyung Hyo; Kim, Yang Soo; Kim, Kun Sang; Lee, Yong Chul; Chun, Jae Myung

    1995-01-01

    We evaluated both the patients and the normal volunteers to determine the diagnostic criteria of subacromial impingement syndrome. We analyzed the radiologic finding of Thirty degree of caudal tilt view (TCTV) and Supraspinatus outlet view (SOV) of 100 shoulders from 85 patients with clinically proved subacromial impingement syndrome and normal 100 shoulders from 60 volunteers. In TCTV, the protrusion of acromion below the line of extension from inferior surface of clavicle was shown in 94% of the patient group and 48% in normal group. Sharp tip of acromial protrusion was detectable in 55.3% of the patient group and 10.4% in normal group. In SOV, curved type of acromion was seen in 53% of the normal and 50% in patient group. Hooked type of acromion was detected in 3% and 31% of the normal and patient group, respectively. Protrusion of acromion at TCTV itself was not a criteria of subacromial impingement syndrome, but more than 7 mm below the line of extension from inferior surface of clavicle was meanigful. In SOV, hooked type of acromion was a criteria of subacromial impingement syndrome but curved type is was not a finding of diagnostic significance

  3. Simple emission metrics for climate impacts

    Directory of Open Access Journals (Sweden)

    B. Aamaas

    2013-06-01

    Full Text Available In the context of climate change, emissions of different species (e.g., carbon dioxide and methane are not directly comparable since they have different radiative efficiencies and lifetimes. Since comparisons via detailed climate models are computationally expensive and complex, emission metrics were developed to allow a simple and straightforward comparison of the estimated climate impacts of emissions of different species. Emission metrics are not unique and variety of different emission metrics has been proposed, with key choices being the climate impacts and time horizon to use for comparisons. In this paper, we present analytical expressions and describe how to calculate common emission metrics for different species. We include the climate metrics radiative forcing, integrated radiative forcing, temperature change and integrated temperature change in both absolute form and normalised to a reference gas. We consider pulse emissions, sustained emissions and emission scenarios. The species are separated into three types: CO2 which has a complex decay over time, species with a simple exponential decay, and ozone precursors (NOx, CO, VOC which indirectly effect climate via various chemical interactions. We also discuss deriving Impulse Response Functions, radiative efficiency, regional dependencies, consistency within and between metrics and uncertainties. We perform various applications to highlight key applications of emission metrics, which show that emissions of CO2 are important regardless of what metric and time horizon is used, but that the importance of short lived climate forcers varies greatly depending on the metric choices made. Further, the ranking of countries by emissions changes very little with different metrics despite large differences in metric values, except for the shortest time horizons (GWP20.

  4. Characterization of non-Lorentzian line shapes in atom-atom collisions

    Energy Technology Data Exchange (ETDEWEB)

    Dehesa, J.S. (Granada Univ. (Spain). Dept. de Fisica Nuclear; Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Kernphysik)

    Two different characterizations of the spectral line shape in the core region of resonance lines of atoms perturbed by other atoms in terms of 1) its moments about the origin and 2) its frequency moments are given. Simple expressions relating the line width and the asymmetry parameter of these collision-broadened lines with two of these moments are obtained. These expressions might lead to a new experimental determination of the average time of duration of atom-atom collisions since the involved moments are measurable.

  5. ExoCross: Spectra from molecular line lists

    Science.gov (United States)

    Yurchenko, Sergei N.; Al-Refaie, Ahmed; Tennyson, Jonathan

    2018-03-01

    ExoCross generates spectra and thermodynamic properties from molecular line lists in ExoMol, HITRAN, or several other formats. The code is parallelized and also shows a high degree of vectorization; it works with line profiles such as Doppler, Lorentzian and Voigt and supports several broadening schemes. ExoCross is also capable of working with the recently proposed method of super-lines. It supports calculations of lifetimes, cooling functions, specific heats and other properties. ExoCross converts between different formats, such as HITRAN, ExoMol and Phoenix, and simulates non-LTE spectra using a simple two-temperature approach. Different electronic, vibronic or vibrational bands can be simulated separately using an efficient filtering scheme based on the quantum numbers.

  6. Magnetic bearing optical delay line

    NARCIS (Netherlands)

    Dool, T.C. van den; Kamphues, F.G.; Fouss, B.; Henrioulle, K.; Hogenhuis, H.

    2004-01-01

    TNO TPD, in close cooperation with Micromega-Dynamics and Dutch Space, has developed an advanced Optical Delay Line (ODL) for use in PRIMA, GENIE and other ground based interferometers. The delay line design is modular and flexible, which makes scaling for other applications a relatively easy task.

  7. What was the Assembly Line?

    DEFF Research Database (Denmark)

    Nye, David

    2010-01-01

    The assembly line is still evolving a century after its invention, and it was not a distinct historical stage, nor was it part of an inevitable sequence that followed "Taylorism."......The assembly line is still evolving a century after its invention, and it was not a distinct historical stage, nor was it part of an inevitable sequence that followed "Taylorism."...

  8. Marine line fish research programme

    CSIR Research Space (South Africa)

    SANCOR

    1979-04-01

    Full Text Available This report outlines the framework for a marine line fish programme under the aegis of the South African National Committee for Oceanographic Research (SANCOR). An attempt is made to assess the state of knowledge about South African marine line...

  9. Drops, contact lines, and electrowetting

    NARCIS (Netherlands)

    't Mannetje, Dieter

    2013-01-01

    In this work, we study the behaviour of drops and contact lines under the influence of electric fields, and how these can answer fundamental and industrial questions. Our focus is on studying the varying balance of the electric field, hysteresis forces and inertia as the speed of a contact line

  10. Mechanical Behaviour of Lined Pipe

    NARCIS (Netherlands)

    Hilberink, A.

    2011-01-01

    Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

  11. Radiosensitivity of mesothelioma cell lines

    Energy Technology Data Exchange (ETDEWEB)

    Haekkinen, A.M. [Dept. of Oncology, Univ. Central Hospital, Helsinki (Finland); Laasonen, A. [Dept. of Pathology, Central Hospital of Etelae-Pohjanmaa, Seinaejoki (Finland); Linnainmaa, K. [Dept. of Industrial Hygiene and Toxicology, Inst. of Occupational Health, Helsinki (Finland); Mattson, K. [Dept. Pulmonary Medicine, Univ. Central Hospital, Helsinki (Finland); Pyrhoenen, S. [Dept. of Oncology, Univ. Central Hospital, Helsinki (Finland)

    1996-10-01

    The present study was carried out in order to examine the radiosensitivity of malignant pleural mesothelioma cell lines. Cell kinetics, radiation-induced delay of the cell cycle and DNA ploidy of the cell lines were also determined. For comparison an HeLa and a human foetal fibroblast cell line were simultaneously explored. Six previously cytogenetically and histologically characterized mesothelioma tumor cell lines were applied. A rapid tiazolyl blue microtiter (MTT) assay was used to analyze radiosensitivity and cell kinetics and DNA ploidy of the cultured cells were determined by flow cytometry. The survival fraction after a dose of 2 Gy (SF2), parameters {alpha} and {beta} of the linear quadratic model (LQ-model) and mean inactivation dose (D{sub MID}) were also estimated. The DNA index of four cell lines equaled 1.0 and two cell lines equaled 1.5 and 1.6. Different mesothelioma cell lines showed a great variation in radiosensitivity. Mean survival fraction after a radiation dose of 2 Gy (SF2) was 0.60 and ranged from 0.36 to 0.81 and mean {alpha} value was 0.26 (range 0.48-0.083). The SF2 of the most sensitive diploid mesothelioma cell line was 0.36: Less than that of the foetal fibroblast cell line (0.49). The survival fractions (0.81 and 0.74) of the two most resistant cell lines, which also were aneuploid, were equal to that of the HeLa cell line (0.78). The {alpha}/{beta} ratios of the most sensitive cell lines were almost an order of magnitude greater than those of the two most resistant cell lines. Radiation-induced delay of the most resistant aneuploid cell line was similar to that of HeLa cells but in the most sensitive (diploid cells) there was practically no entry into the G1 phase following the 2 Gy radiation dose during 36 h. (orig.).

  12. US line-ups outperform UK line-ups.

    Science.gov (United States)

    Seale-Carlisle, Travis M; Mickes, Laura

    2016-09-01

    In the USA and the UK, many thousands of police suspects are identified by eyewitnesses every year. Unfortunately, many of those suspects are innocent, which becomes evident when they are exonerated by DNA testing, often after having been imprisoned for years. It is, therefore, imperative to use identification procedures that best enable eyewitnesses to discriminate innocent from guilty suspects. Although police investigators in both countries often administer line-up procedures, the details of how line-ups are presented are quite different and an important direct comparison has yet to be conducted. We investigated whether these two line-up procedures differ in terms of (i) discriminability (using receiver operating characteristic analysis) and (ii) reliability (using confidence-accuracy characteristic analysis). A total of 2249 participants watched a video of a crime and were later tested using either a six-person simultaneous photo line-up procedure (USA) or a nine-person sequential video line-up procedure (UK). US line-up procedure yielded significantly higher discriminability and significantly higher reliability. The results do not pinpoint the reason for the observed difference between the two procedures, but they do suggest that there is much room for improvement with the UK line-up.

  13. Formación on line On line learning

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    2008-09-01

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.On line learning is a type of distance education based on new technologies. This article's aim is to introduce its main characteristics -asynchrony, non-presentiality, written communication, e-teacher role- as well as its challenges, risks, advantages and limitations. Differences between on line learning and face-to-face learning are presented in order to enable educational professionals to adapt their courses to the on line methodology. Planning and designing are introduced as key phases and, finally, useful concepts such as Virtual Learning Environment (VLE or Blended Learning (B-Learning are reviewed in order to achieve a better understanding of the on line learning field.

  14. Simple queueing approach to segregation dynamics in Schelling model

    OpenAIRE

    Sobkowicz, Pawel

    2007-01-01

    A simple queueing approach for segregation of agents in modified one dimensional Schelling segregation model is presented. The goal is to arrive at simple formula for the number of unhappy agents remaining after the segregation.

  15. Creating Simple Admin Tools Using Info*Engine and Java

    Science.gov (United States)

    Jones, Corey; Kapatos, Dennis; Skradski, Cory; Felkins, J. D.

    2012-01-01

    PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create a simple Info*Engine Tasks capable of saving Windchill 10.0 administration of tedious work.

  16. A simple algorithm for computing canonical forms

    Science.gov (United States)

    Ford, H.; Hunt, L. R.; Renjeng, S.

    1986-01-01

    It is well known that all linear time-invariant controllable systems can be transformed to Brunovsky canonical form by a transformation consisting only of coordinate changes and linear feedback. However, the actual procedures for doing this have tended to be overly complex. The technique introduced here is envisioned as an on-line procedure and is inspired by George Meyer's tangent model for nonlinear systems. The process utilizes Meyer's block triangular form as an intermedicate step in going to Brunovsky form. The method also involves orthogonal matrices, thus eliminating the need for the computation of matrix inverses. In addition, the Kronecker indices can be computed as a by-product of this transformation so it is necessary to know them in advance.

  17. Simple process to fabricate nitride alloy powders

    International Nuclear Information System (INIS)

    Yang, Jae Ho; Kim, Dong-Joo; Kim, Keon Sik; Rhee, Young Woo; Oh, Jang-Soo; Kim, Jong Hun; Koo, Yang Hyun

    2013-01-01

    Uranium mono-nitride (UN) is considered as a fuel material [1] for accident-tolerant fuel to compensate for the loss of fissile fuel material caused by adopting a thickened cladding such as SiC composites. Uranium nitride powders can be fabricated by a carbothermic reduction of the oxide powders, or the nitriding of metal uranium. Among them, a direct nitriding process of metal is more attractive because it has advantages in the mass production of high-purity powders and the reusing of expensive 15 N 2 gas. However, since metal uranium is usually fabricated in the form of bulk ingots, it has a drawback in the fabrication of fine powders. The Korea Atomic Energy Research Institute (KAERI) has a centrifugal atomisation technique to fabricate uranium and uranium alloy powders. In this study, a simple reaction method was tested to fabricate nitride fuel powders directly from uranium metal alloy powders. Spherical powder and flake of uranium metal alloys were fabricated using a centrifugal atomisation method. The nitride powders were obtained by thermal treating the metal particles under nitrogen containing gas. The phase and morphology evolutions of powders were investigated during the nitriding process. A phase analysis of nitride powders was also part of the present work. KAERI has developed the centrifugal rotating disk atomisation process to fabricate spherical uranium metal alloy powders which are used as advanced fuel materials for research reactors. The rotating disk atomisation system involves the tasks of melting, atomising, and collecting. A nozzle in the bottom of melting crucible introduces melt at the center of a spinning disk. The centrifugal force carries the melt to the edge of the disk and throws the melt off the edge. Size and shape of droplets can be controlled by changing the nozzle size, the disk diameter and disk speed independently or simultaneously. By adjusting the processing parameters of the centrifugal atomiser, a spherical and flake shape

  18. Planetary Defense From Space: Part 2 (Simple) Asteroid Deflection Law

    Science.gov (United States)

    Maccone, Claudio

    2006-06-01

    defense missiles are to be housed;the deflecting missile's data, namely its mass and especially its “extra-boost”, that is, the extra-energy by which the missile must hit the asteroid to achieve the requested minimal deflection outside the security radius around the Earth.This discovery of the simple “asteroid deflection law” presented in this paper was possible because:In the vicinity of the Earth, the hyperbola of the arriving asteroid is nearly the same as its own asymptote, namely, the asteroid's hyperbola is very much like a straight line. We call this approximation the line/circle approximation. Although “rough” compared to the ordinary Keplerian theory, this approximation simplifies the mathematical problem to such an extent that two simple, final equations can be derived.The confocal missile trajectory, orthogonal to this straight line, ceases then to be an ellipse to become just a circle centered at the Earth. This fact also simplifies things greatly. Our results are thus to be regarded as a good engineering approximation, valid for a preliminary astronautical design of the missiles and bases at L1 and L3.Still, many more sophisticated refinements would be needed for a complete Planetary Defense System:taking into account many perturbation forces of all kinds acting on both the asteroids and missiles shot from L1 and L3;adding more (non-optimal) trajectories of missiles shot from either the Lagrangian points L4 and L5 of the Earth Moon system or from the surface of the Moon itself;encompassing the full range of missiles currently available to the USA (and possibly other countries) so as to really see “which missiles could divert which asteroids”, even just within the very simplified scheme proposed in this paper.In summary: outlined for the first time in February 2002, our Confocal Planetary Defense concept is a simplified Keplerian Theory that already proved simple enough to catch the attention of scholars, popular writers, and representatives of

  19. Simple sequence proteins in prokaryotic proteomes

    Directory of Open Access Journals (Sweden)

    Ramachandran Srinivasan

    2006-06-01

    Full Text Available Abstract Background The structural and functional features associated with Simple Sequence Proteins (SSPs are non-globularity, disease states, signaling and post-translational modification. SSPs are also an important source of genetic and possibly phenotypic variation. Analysis of 249 prokaryotic proteomes offers a new opportunity to examine the genomic properties of SSPs. Results SSPs are a minority but they grow with proteome size. This relationship is exhibited across species varying in genomic GC, mutational bias, life style, and pathogenicity. Their proportion in each proteome is strongly influenced by genomic base compositional bias. In most species simple duplications is favoured, but in a few cases such as Mycobacteria, large families of duplications occur. Amino acid preference in SSPs exhibits a trend towards low cost of biosynthesis. In SSPs and in non-SSPs, Alanine, Glycine, Leucine, and Valine are abundant in species widely varying in genomic GC whereas Isoleucine and Lysine are rich only in organisms with low genomic GC. Arginine is abundant in SSPs of two species and in the non-SSPs of Xanthomonas oryzae. Asparagine is abundant only in SSPs of low GC species. Aspartic acid is abundant only in the non-SSPs of Halobacterium sp NRC1. The abundance of Serine in SSPs of 62 species extends over a broader range compared to that of non-SSPs. Threonine(T is abundant only in SSPs of a couple of species. SSPs exhibit preferential association with Cell surface, Cell membrane and Transport functions and a negative association with Metabolism. Mesophiles and Thermophiles display similar ranges in the content of SSPs. Conclusion Although SSPs are a minority, the genomic forces of base compositional bias and duplications influence their growth and pattern in each species. The preferences and abundance of amino acids are governed by low biosynthetic cost, evolutionary age and base composition of codons. Abundance of charged amino acids Arginine

  20. Foreshocks and Aftershocks in Simple Earthquake Models

    Science.gov (United States)

    Tiampo, K. F.; Klein, W.; Dominguez, R.; Kazemian, J.; González, P. J.

    2014-12-01

    Natural earthquake fault systems are highly heterogeneous in space; inhomogeneities occur because the earth is made of a variety of materials of different strengths and dissipate stress differently. Because the spatial arrangement of these materials is dependent on the geologic history, the distribution of these various materials can be quite complex and occur over a wide range of length scales. Despite their inhomogeneous nature, real faults are often modeled as spatially homogeneous systems. Here we present a simple earthquake fault model based on the Olami-Feder-Christensen (OFC) and Rundle-Jackson-Brown (RJB) cellular automata models with long-range interactions that incorporates a fixed percentage of stronger sites, or 'asperity cells', into the lattice. These asperity cells are significantly stronger than the surrounding lattice sites but eventually rupture when the applied stress reaches their higher threshold stress. The introduction of these spatial heterogeneities results in temporal clustering in the model that mimics those seen in natural fault systems. We observe sequences of activity that start with a gradually accelerating number of larger events (foreshocks) prior to a mainshock that is followed by a tail of decreasing activity (aftershocks). These recurrent large events occur at regular intervals, as is often observed in historic seismicity, and the time between events and their magnitude are a function of the stress dissipation parameter. The relative length of the foreshock to aftershock sequence depends on the amount of stress dissipation in the system, resulting in relatively long aftershock sequences when the stress dissipation is large versus long foreshock sequences when the stress dissipation is weak. This work provides further evidence that the spatial and temporal patterns observed in natural seismicity are strongly influenced by the underlying physical properties and are not solely the result of a simple cascade mechanism. We find that

  1. Expectations for inflationary observables: simple or natural?

    Science.gov (United States)

    Musoke, Nathan; Easther, Richard

    2017-12-01

    We describe the general inflationary dynamics that can arise with a single, canonically coupled field where the inflaton potential is a 4-th order polynomial. This scenario yields a wide range of combinations of the empirical spectral observables, ns, r and αs. However, not all combinations are possible and next-generation cosmological experiments have the ability to rule out all inflationary scenarios based on this potential. Further, we construct inflationary priors for this potential based on physically motivated choices for its free parameters. These can be used to determine the degree of tuning associated with different combinations of ns, r and αs and will facilitate treatments of the inflationary model selection problem. Finally, we comment on the implications of these results for the naturalness of the overall inflationary paradigm. We argue that ruling out all simple, renormalizable potentials would not necessarily imply that the inflationary paradigm itself was unnatural, but that this eventuality would increase the importance of building inflationary scenarios in the context of broader paradigms of ultra-high energy physics.

  2. Exact Fit of Simple Finite Mixture Models

    Directory of Open Access Journals (Sweden)

    Dirk Tasche

    2014-11-01

    Full Text Available How to forecast next year’s portfolio-wide credit default rate based on last year’s default observations and the current score distribution? A classical approach to this problem consists of fitting a mixture of the conditional score distributions observed last year to the current score distribution. This is a special (simple case of a finite mixture model where the mixture components are fixed and only the weights of the components are estimated. The optimum weights provide a forecast of next year’s portfolio-wide default rate. We point out that the maximum-likelihood (ML approach to fitting the mixture distribution not only gives an optimum but even an exact fit if we allow the mixture components to vary but keep their density ratio fixed. From this observation we can conclude that the standard default rate forecast based on last year’s conditional default rates will always be located between last year’s portfolio-wide default rate and the ML forecast for next year. As an application example, cost quantification is then discussed. We also discuss how the mixture model based estimation methods can be used to forecast total loss. This involves the reinterpretation of an individual classification problem as a collective quantification problem.

  3. Interactions between simple radicals and water

    Energy Technology Data Exchange (ETDEWEB)

    Crespo-Otero, Rachel [Lehrstuhl fuer Organische Chemie II der Ruhr-Universitaet Bochum, D-44780 Bochum (Germany); Laboratorio de Quimica Computacional y Teorica, Facultad de Quimica, Universidad de la Habana, 10400 (Cuba); Sanchez-Garcia, Elsa [Lehrstuhl fuer Organische Chemie II der Ruhr-Universitaet Bochum, D-44780 Bochum (Germany)], E-mail: elsa.sanchez@rub.de; Suardiaz, Reynier; Montero, Luis A. [Laboratorio de Quimica Computacional y Teorica, Facultad de Quimica, Universidad de la Habana, 10400 (Cuba); Sander, Wolfram [Lehrstuhl fuer Organische Chemie II der Ruhr-Universitaet Bochum, D-44780 Bochum (Germany)], E-mail: wolfram.sander@rub.de

    2008-11-03

    The interactions of the simple radicals CH{sub 3}, NH{sub 2}, OH, and F with water have been studied by DFT (UB3LYP/6-311++G(2d,2p)) and ab initio (RHF-UCCSD(T)/6-311++G(2d,2p)) methods. In this order the number of lone pairs (from zero to three), the electronegativity, and the strength of the X-H bonds increase (X = C, N, and O). The various minima of the radical-water complexes were located using the multiple minima hypersurface (MMH) approach which had previously been proven to be useful for closed-shell molecules. The role of the unpaired electron in hydrogen bonding was investigated using the natural bond orbital (NBO) analysis. A considerable contribution of the unpaired electron to the complex stabilization was only found for the methyl radical and the fluorine atom, whereas in the aminyl and the hydroxyl radical the role of the unpaired electron is negligible.

  4. Two simple tools for industrial OR

    Directory of Open Access Journals (Sweden)

    K. Sandrock

    2003-12-01

    Full Text Available At the 1985 Annual Congress of the South African Production & Inventory Control Society it was pointed out that the productivity growth rate for South Africa is completely out of kilter with that for the western industrialised nations. The latter all display positive rates (some as high as that of Japan whereas the rate for South Africa is - NEGATIVE. Partly as a result of this situation, more and more attention is being given to quality control and reliability engineering by our industrialists in their attempts to improve productivity. This is going hand in hand with the introduction of better techniques and better use of the latest technology. We should also give attention to analytical tools that may be used in a simple inexpensive way to improve our methods of analysing industrial data, and in this way to improve our performance at little or no additional cost. To this end two tools are discussed. They are by means new. But it does seem as though they could be more widely applied in the industrial milieu.

  5. Simple mathematical law benchmarks human confrontations

    Science.gov (United States)

    Johnson, Neil F.; Medina, Pablo; Zhao, Guannan; Messinger, Daniel S.; Horgan, John; Gill, Paul; Bohorquez, Juan Camilo; Mattson, Whitney; Gangi, Devon; Qi, Hong; Manrique, Pedro; Velasquez, Nicolas; Morgenstern, Ana; Restrepo, Elvira; Johnson, Nicholas; Spagat, Michael; Zarama, Roberto

    2013-12-01

    Many high-profile societal problems involve an individual or group repeatedly attacking another - from child-parent disputes, sexual violence against women, civil unrest, violent conflicts and acts of terror, to current cyber-attacks on national infrastructure and ultrafast cyber-trades attacking stockholders. There is an urgent need to quantify the likely severity and timing of such future acts, shed light on likely perpetrators, and identify intervention strategies. Here we present a combined analysis of multiple datasets across all these domains which account for >100,000 events, and show that a simple mathematical law can benchmark them all. We derive this benchmark and interpret it, using a minimal mechanistic model grounded by state-of-the-art fieldwork. Our findings provide quantitative predictions concerning future attacks; a tool to help detect common perpetrators and abnormal behaviors; insight into the trajectory of a `lone wolf' identification of a critical threshold for spreading a message or idea among perpetrators; an intervention strategy to erode the most lethal clusters; and more broadly, a quantitative starting point for cross-disciplinary theorizing about human aggression at the individual and group level, in both real and online worlds.

  6. Rotational modes of a simple Earth model

    Science.gov (United States)

    Seyed-Mahmoud, B.; Rochester, M. G.; Rogister, Y. J. G.

    2017-12-01

    We study the tilt-over mode (TOM), the spin-over mode (SOM), the free core nutation (FCN), and their relationships to each other using a simple Earth model with a homogeneous and incompressible liquid core and a rigid mantle. Analytical solutions for the periods of these modes as well as that of the Chandler wobble is found for the Earth model. We show that the FCN is the same mode as the SOM of a wobbling Earth. The reduced pressure, in terms of which the vector momentum equation is known to reduce to a scalar second order differential equation (the so called Poincaŕe equation), is used as the independent variable. Analytical solutions are then found for the displacement eigenfucntions in a meridional plane of the liquid core for the aforementioned modes. We show that the magnitude of motion in the mantle during the FCN is comparable to that in the liquid core, hence very small. The displacement eigenfunctions for these aforementioned modes as well as those for the free inner core nutation (FICN), computed numerically, are also given for a three layer Earth model which also includes a rigid but capable of wobbling inner core. We will discuss the slow convergence of the period of the FICN in terms of the characteristic surfaces of the Poincare equation.

  7. Variations on a simple dice game

    Science.gov (United States)

    Heafner, Joe

    2018-04-01

    I begin my introductory astronomy course with a unit on critical thinking that focuses on, among other things, the differences between the "scientific method" as frequently presented in textbooks and actual scientific practice. One particular classroom activity uses a simple dice game to simulate observation of a natural phenomenon and the process of figuring out the framework, which we have previously defined as the rules that allow us to make predictions, governing the simulated phenomenon. Using games to teach scientific methodology is not new (see Maloney and Masters and Smith and references therein). I have experimented with Maloney and Masters' games and discovered that my students found them too difficult to figure out and therefore they did not learn what I hoped they would from them. I also experimented with other card games and found that too many students already knew the rules of both well-known and obscure card games. I even tried inventing my own games with, at best, mediocre results.

  8. Simple mathematical models of gene regulatory dynamics

    CERN Document Server

    Mackey, Michael C; Tyran-Kamińska, Marta; Zeron, Eduardo S

    2016-01-01

    This is a short and self-contained introduction to the field of mathematical modeling of gene-networks in bacteria. As an entry point to the field, we focus on the analysis of simple gene-network dynamics. The notes commence with an introduction to the deterministic modeling of gene-networks, with extensive reference to applicable results coming from dynamical systems theory. The second part of the notes treats extensively several approaches to the study of gene-network dynamics in the presence of noise—either arising from low numbers of molecules involved, or due to noise external to the regulatory process. The third and final part of the notes gives a detailed treatment of three well studied and concrete examples of gene-network dynamics by considering the lactose operon, the tryptophan operon, and the lysis-lysogeny switch. The notes contain an index for easy location of particular topics as well as an extensive bibliography of the current literature. The target audience of these notes are mainly graduat...

  9. Coordination and control inside simple biomolecular machines.

    Science.gov (United States)

    Yu, Jin

    2014-01-01

    Biomolecular machines can achieve physiological functions precisely and efficiently, though they always operate under fluctuations and noises. We review two types of simple machinery that we have recently studied. The machinery can be regarded as molecular motors. They transform chemical free energy from NTP hydrolysis to mechanical work. One type belongs to small monomeric helicases that move directionally along single-stranded nucleic acid, and may further unwind the duplex part for gene replication or repair. The other type belongs to ring-shaped NTPase motors that also move or transport nucleic acid or protein substrate in a directional manner, such as for genome packaging or protein degradation. The central issue in this review is on how the machinery coordinates essential degrees of freedom during the mechanochemical coupling process. Further concerns include how the coordination and control are manifested in experiments, and how they can be captured well in modeling and computational research. We employed atomistic molecular dynamics simulations, coarse-grained analyses, and stochastic modeling techniques to examine the molecular machines at multiple resolutions and timescales. Detailed descriptions on how the protein interacts with its substrate at interface, as well as how multiple protein subunits are coordinated are summarized.

  10. A Simple Decontamination Approach Using Hydrogen ...

    Science.gov (United States)

    Journal article To evaluate the use of relatively low levels of hydrogen peroxide vapor (HPV) for the inactivation of Bacillus anthracis spores within an indoor environment. Methods and Results: Laboratory-scale decontamination tests were conducted using bacterial spores of both B. anthracis Ames and Bacillus atrophaeus inoculated onto several types of materials. Pilot-scale tests were also conducted using a larger chamber furnished as an indoor office. Commercial off-the-shelf (COTS) humidifiers filled with aqueous solutions of 3% or 8% hydrogen peroxide were used to generate the HPV inside the mock office. The spores were exposed to the HPV for periods ranging from 8 hours up to one week. Conclusions: Four to seven day exposures to low levels of HPV (average air concentrations of approximately 5-10 parts per million) were effective in inactivating B. anthracis spores on multiple materials. The HPV can be generated with COTS humidifiers and household H2O2 solutions. With the exception of one test/material, B. atrophaeus spores were equally or more resistant to HPV inactivation compared to those from B. anthracis Ames. Significance and Impact of Study: This simple and effective decontamination method is another option that could be widely applied in the event of a B. anthracis spore release.

  11. A simple model for studying interacting networks

    Science.gov (United States)

    Liu, Wenjia; Jolad, Shivakumar; Schmittmann, Beate; Zia, R. K. P.

    2011-03-01

    Many specific physical networks (e.g., internet, power grid, interstates), have been characterized in considerable detail, but in isolation from each other. Yet, each of these networks supports the functions of the others, and so far, little is known about how their interactions affect their structure and functionality. To address this issue, we consider two coupled model networks. Each network is relatively simple, with a fixed set of nodes, but dynamically generated set of links which has a preferred degree, κ . In the stationary state, the degree distribution has exponential tails (far from κ), an attribute which we can explain. Next, we consider two such networks with different κ 's, reminiscent of two social groups, e.g., extroverts and introverts. Finally, we let these networks interact by establishing a controllable fraction of cross links. The resulting distribution of links, both within and across the two model networks, is investigated and discussed, along with some potential consequences for real networks. Supported in part by NSF-DMR-0705152 and 1005417.

  12. Equilibria of perceptrons for simple contingency problems.

    Science.gov (United States)

    Dawson, Michael R W; Dupuis, Brian

    2012-08-01

    The contingency between cues and outcomes is fundamentally important to theories of causal reasoning and to theories of associative learning. Researchers have computed the equilibria of Rescorla-Wagner models for a variety of contingency problems, and have used these equilibria to identify situations in which the Rescorla-Wagner model is consistent, or inconsistent, with normative models of contingency. Mathematical analyses that directly compare artificial neural networks to contingency theory have not been performed, because of the assumed equivalence between the Rescorla-Wagner learning rule and the delta rule training of artificial neural networks. However, recent results indicate that this equivalence is not as straightforward as typically assumed, suggesting a strong need for mathematical accounts of how networks deal with contingency problems. One such analysis is presented here, where it is proven that the structure of the equilibrium for a simple network trained on a basic contingency problem is quite different from the structure of the equilibrium for a Rescorla-Wagner model faced with the same problem. However, these structural differences lead to functionally equivalent behavior. The implications of this result for the relationships between associative learning, contingency theory, and connectionism are discussed.

  13. Simple model of the slingshot effect

    Directory of Open Access Journals (Sweden)

    Gaetano Fiore

    2016-07-01

    Full Text Available We present a detailed quantitative description of the recently proposed “slingshot effect.” Namely, we determine a broad range of conditions under which the impact of a very short and intense laser pulse normally onto a low-density plasma (or matter locally completely ionized into a plasma by the pulse causes the expulsion of a bunch of surface electrons in the direction opposite to the one of propagation of the pulse, and the detailed, ready-for-experiments features of the expelled electrons (energy spectrum, collimation, etc. The effect is due to the combined actions of the ponderomotive force and the huge longitudinal field arising from charge separation. Our predictions are based on estimating 3D corrections to a simple, yet powerful plane 2-fluid magnetohydrodynamic (MHD model where the equations to be solved are reduced to a system of Hamilton equations in one dimension (or a collection of which become autonomous after the pulse has overcome the electrons. Experimental tests seem to be at hand. If confirmed by the latter, the effect would provide a new extraction and acceleration mechanism for electrons, alternative to traditional radio-frequency-based or Laser-Wake-Field ones.

  14. College Aptitude Test Simple Checker (Version 2

    Directory of Open Access Journals (Sweden)

    Jake G. Maggay

    2017-05-01

    Full Text Available All enrolees of the Cagayan State University are required to take the College Aptitude Test (CAT. The CAT result serves as a basis for recommendation and admission to a specific course or field of specialization, thus, result must be accurate. The study a imed to develop a computerized College Aptitude Test (CAT Simple Checker of Cagayan State University – Lasam Campus to facilitate and to reduce the time of the guidance counsellor in checking many aptitude test papers as well as to ensure accuracy of resu lt. It followed the framework of Design Science Research in Information Systems which consists of six steps such as problem identification and motivation, definition of objectives for a solution based on the identified problem, design and development of th e system, demonstration of the system to the guidance counsellor, evaluation of the system’s functionality and impact and communication which involves documentation and publication. A combination of Visual Basic 6 as the programming language and SQL Server 2005 as the Database Management System (DBMS were used in the development of the system. As a result, the system provides support to the guidance counsellor in performing the assigned tasks by reducing the time consumed in checking aptitude test papers t hat makes the guidance counsellor more effective, efficient and productive.

  15. ZeroMQ: Messaging Made Simple

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    Since its inception in 2007, ZeroMQ has defined a new product category of thin, fast, open source message transports. This little library has now grown into a large, vibrant community of projects tied together with standard protocols and APIs. Applications, written in any language, talk to each other over TCP, multicast, or inproc transports, using a single socket-based API, and a set of "patterns" (pub-sub, request-reply, dealer-router, pipeline). ZeroMQ handles message framing, batching, and I/O, but ignores aspects like serialization and persistence. By focussing on the essentials, and acting as a toolkit rather than a pre-packaged solution, ZeroMQ turns the complex problem of distributed computing into a relatively simple recipe. About the speaker Pieter Hintjens is a writer, programmer, and public speaker who has spent decades building large software systems, organizations, and businesses. He designed the Advanced Message Queuing Protocol (AMQP) in 2006 for JPMorganChase and left ...

  16. A simple law of star formation

    DEFF Research Database (Denmark)

    Padoan, Paolo; Haugbølle, Troels; Nordlund, Åke

    2012-01-01

    We show that supersonic MHD turbulence yields a star formation rate (SFR) as low as observed in molecular clouds, for characteristic values of the free-fall time divided by the dynamical time, t ff/t dyn, the Alfvénic Mach number, {\\cal M}_a, and the sonic Mach number, {\\cal M}_s. Using a very...... values of t ff/t dyn and {\\cal M}_a. (2) Decreasing values of {\\cal M}_a (stronger magnetic fields) reduce epsilonff, but only to a point, beyond which epsilonff increases with a further decrease of {\\cal M}_a. (3) For values of {\\cal M}_a characteristic of star-forming regions, epsilonff varies...... with {\\cal M}_a by less than a factor of two. We propose a simple star formation law, based on the empirical fit to the minimum epsilonff, and depending only on t ff/t dyn: epsilonff ˜ epsilonwindexp (– 1.6 t ff/t dyn). Because it only depends on the mean gas density and rms velocity, this law...

  17. A Simple Model to Study Tau Pathology

    Directory of Open Access Journals (Sweden)

    Alexander L. Houck

    2016-01-01

    Full Text Available Tau proteins play a role in the stabilization of microtubules, but in pathological conditions, tauopathies, tau is modified by phosphorylation and can aggregate into aberrant aggregates. These aggregates could be toxic to cells, and different cell models have been used to test for compounds that might prevent these tau modifications. Here, we have used a cell model involving the overexpression of human tau in human embryonic kidney 293 cells. In human embryonic kidney 293 cells expressing tau in a stable manner, we have been able to replicate the phosphorylation of intracellular tau. This intracellular tau increases its own level of phosphorylation and aggregates, likely due to the regulatory effect of some growth factors on specific tau kinases such as GSK3. In these conditions, a change in secreted tau was observed. Reversal of phosphorylation and aggregation of tau was found by the use of lithium, a GSK3 inhibitor. Thus, we propose this as a simple cell model to study tau pathology in nonneuronal cells due to their viability and ease to work with.

  18. Pyglidein - A Simple HTCondor Glidein Service

    Science.gov (United States)

    Schultz, D.; Riedel, B.; Merino, G.

    2017-10-01

    A major challenge for data processing and analysis at the IceCube Neutrino Observatory presents itself in connecting a large set of individual clusters together to form a computing grid. Most of these clusters do not provide a “standard” grid interface. Using a local account on each submit machine, HTCondor glideins can be submitted to virtually any type of scheduler. The glideins then connect back to a main HTCondor pool, where jobs can run normally with no special syntax. To respond to dynamic load, a simple server advertises the number of idle jobs in the queue and the resources they request. The submit script can query this server to optimize glideins to what is needed, or not submit if there is no demand. Configuring HTCondor dynamic slots in the glideins allows us to efficiently handle varying memory requirements as well as whole-node jobs. One step of the IceCube simulation chain, photon propagation in the ice, heavily relies on GPUs for faster execution. Therefore, one important requirement for any workload management system in IceCube is to handle GPU resources properly. Within the pyglidein system, we have successfully configured HTCondor glideins to use any GPU allocated to it, with jobs using the standard HTCondor GPU syntax to request and use a GPU. This mechanism allows us to seamlessly integrate our local GPU cluster with remote non-Grid GPU clusters, including specially allocated resources at XSEDE supercomputers.

  19. Simple models of the hydrofracture process

    KAUST Repository

    Marder, M.

    2015-12-29

    Hydrofracturing to recover natural gas and oil relies on the creation of a fracture network with pressurized water. We analyze the creation of the network in two ways. First, we assemble a collection of analytical estimates for pressure-driven crack motion in simple geometries, including crack speed as a function of length, energy dissipated by fluid viscosity and used to break rock, and the conditions under which a second crack will initiate while a first is running. We develop a pseudo-three-dimensional numerical model that couples fluid motion with solid mechanics and can generate branching crack structures not specified in advance. One of our main conclusions is that the typical spacing between fractures must be on the order of a meter, and this conclusion arises in two separate ways. First, it arises from analysis of gas production rates, given the diffusion constants for gas in the rock. Second, it arises from the number of fractures that should be generated given the scale of the affected region and the amounts of water pumped into the rock.

  20. Squid – a simple bioinformatics grid

    Directory of Open Access Journals (Sweden)

    de Miranda Antonio B

    2005-08-01

    Full Text Available Abstract Background BLAST is a widely used genetic research tool for analysis of similarity between nucleotide and protein sequences. This paper presents a software application entitled "Squid" that makes use of grid technology. The current version, as an example, is configured for BLAST applications, but adaptation for other computing intensive repetitive tasks can be easily accomplished in the open source version. This enables the allocation of remote resources to perform distributed computing, making large BLAST queries viable without the need of high-end computers. Results Most distributed computing / grid solutions have complex installation procedures requiring a computer specialist, or have limitations regarding operating systems. Squid is a multi-platform, open-source program designed to "keep things simple" while offering high-end computing power for large scale applications. Squid also has an efficient fault tolerance and crash recovery system against data loss, being able to re-route jobs upon node failure and recover even if the master machine fails. Our results show that a Squid application, working with N nodes and proper network resources, can process BLAST queries almost N times faster than if working with only one computer. Conclusion Squid offers high-end computing, even for the non-specialist, and is freely available at the project web site. Its open-source and binary Windows distributions contain detailed instructions and a "plug-n-play" instalation containing a pre-configured example.

  1. Sustained Attention Ability Affects Simple Picture Naming

    Directory of Open Access Journals (Sweden)

    Suzanne R. Jongman

    2017-07-01

    Full Text Available Sustained attention has previously been shown as a requirement for language production. However, this is mostly evident for difficult conditions, such as a dual-task situation. The current study provides corroborating evidence that this relationship holds even for simple picture naming. Sustained attention ability, indexed both by participants’ reaction times and individuals’ hit rate (the proportion of correctly detected targets on a digit discrimination task, correlated with picture naming latencies. Individuals with poor sustained attention were consistently slower and their RT distributions were more positively skewed when naming pictures compared to individuals with better sustained attention. Additionally, the need to sustain attention was manipulated by changing the speed of stimulus presentation. Research has suggested that fast event rates tax sustained attention resources to a larger degree than slow event rates. However, in this study the fast event rate did not result in increased difficulty, neither for the picture naming task nor for the sustained attention task. Instead, the results point to a speed-accuracy trade-off in the sustained attention task (lower accuracy but faster responses in the fast than in the slow event rate, and to a benefit for faster rates in the picture naming task (shorter naming latencies with no difference in accuracy. Performance on both tasks was largely comparable, supporting previous findings that sustained attention is called upon during language production.

  2. Simple light gas guns for hypervelocity studies

    International Nuclear Information System (INIS)

    Combs, S.K.; Haselton, H.H.; Milora, S.L.

    1990-01-01

    Two-stage light guns are used extensively in hypervelocity research. The applications of this technology include impact studies and special materials development. Oak Ridge National Laboratory (ORNL) has developed two-stage guns that accelerate small projectiles (4-mm nominal diameter) to velocities of up to ∼5 km/s. These guns are relatively small and simple (thus, easy to operate), allowing a significant number of test shots to be carried out and data accumulated in a short time. Materials that have been used for projectiles include plastics, frozen isotopes of hydrogen, and lithium hydride. One gun has been used to demonstrate repetitive operation at a rate of 0.7 Hz; and, with a few design improvements, it appears capable of performing at firing frequencies of 1--2 Hz. A schematic of ORNL two-stage device is shown below. Unlike most such devices, no rupture disks are used. Instead, a fast valve (high-flow type) initiates the acceleration process in the first stage. Projectiles can be loaded into the gun breech via the slide mechanism; this action has been automated which allows repetitive firing. Alternatively, the device is equipped with ''pipe gun'' apparatus in which gas can be frozen in situ in the gun barrel to form the projectile. This equipment operates with high reliability and is well suited for small-scale testing at high velocity. 17 refs., 6 figs., 2 tabs

  3. EXTRACTION OF BUILDING BOUNDARY LINES FROM AIRBORNE LIDAR POINT CLOUDS

    Directory of Open Access Journals (Sweden)

    Y.-H. Tseng

    2016-10-01

    Full Text Available Building boundary lines are important spatial features that characterize the topographic maps and three-dimensional (3D city models. Airborne LiDAR Point clouds provide adequate 3D spatial information for building boundary mapping. However, information of boundary features contained in point clouds is implicit. This study focuses on developing an automatic algorithm of building boundary line extraction from airborne LiDAR data. In an airborne LiDAR dataset, top surfaces of buildings, such as roofs, tend to have densely distributed points, but vertical surfaces, such as walls, usually have sparsely distributed points or even no points. The intersection lines of roof and wall planes are, therefore, not clearly defined in point clouds. This paper proposes a novel method to extract those boundary lines of building edges. The extracted line features can be used as fundamental data to generate topographic maps of 3D city model for an urban area. The proposed method includes two major process steps. The first step is to extract building boundary points from point clouds. Then the second step is followed to form building boundary line features based on the extracted boundary points. In this step, a line fitting algorithm is developed to improve the edge extraction from LiDAR data. Eight test objects, including 4 simple low buildings and 4 complicated tall buildings, were selected from the buildings in NCKU campus. The test results demonstrate the feasibility of the proposed method in extracting complicate building boundary lines. Some results which are not as good as expected suggest the need of further improvement of the method.

  4. Line structures in recurrence plots

    International Nuclear Information System (INIS)

    Marwan, Norbert; Kurths, Juergen

    2005-01-01

    Recurrence plots exhibit line structures which represent typical behaviour of the investigated system. The local slope of these line structures is connected with a specific transformation of the time scales of different segments of the phase-space trajectory. This provides us a better understanding of the structures occurring in recurrence plots. The relationship between the time-scales and line structures are of practical importance in cross recurrence plots. Using this relationship within cross recurrence plots, the time-scales of differently sampled or time-transformed measurements can be adjusted. An application to geophysical measurements illustrates the capability of this method for the adjustment of time-scales in different measurements

  5. Application studies of line arresters

    Energy Technology Data Exchange (ETDEWEB)

    Zanetta Junior, Luiz Cera; Pereira, Carlos Eduardo de Morais [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia de Energia e Automacao Eletricas]. E-mail: lzanetta@pea.usp.br

    2001-07-01

    This paper presents the main calculations of the line arresters impact on outage rates, by focusing their effects on critical current curves, in presence of the power frequency voltage. The present critical results obtained will help in the understanding of some variables during the outrage calculations. Energy stresses on arresters due to first stroke are also evaluated in function of tower foot resistance. The transmission line studied, has a shielded 138 kV line configuration, single circuit typical of Brazilian SE region. The alternative with Zn O arresters consider their installation at every tower, in the two lower phases b and c. (author)

  6. Status of ACCULINNA beam line

    CERN Document Server

    Rodin, A M; Bogdanov, D D; Golovkov, M S; Fomichev, A S; Sidorchuk, S I; Slepnev, R S; Wolski, R; Ter-Akopian, G M; Oganessian, Yu T; Yukhimchuk, A A; Perevozchikov, V V; Vinogradov, Yu I; Grishenchkin, S K; Demin, A M; Zlatoustovskii, S V; Kuryakin, A V; Filchagin, S V; Ilkaev, R I

    2003-01-01

    The separator ACCULINNA was upgraded to achieve new experimental requirements. The beam line was extended by new ion-optical elements beyond the cyclotron hall. The new arrangements yield much better background conditions. The intensities of sup 6 He and sup 8 He radioactive beams produced in fragmentation of 35 A MeV sup 1 sup 1 B ions were increased up to a factor of 10. The upgraded beam line was used in experiments to study the sup 5 H resonance states populated in the t+t reaction. A cryogenic liquid tritium target was designed and installed at the separator beam line.

  7. Analysis of some coplanar transmission lines: coplanar coupled lines, coplanar coupled striplines, and coplanar coupled lines with rectangular microshield

    Science.gov (United States)

    Yuan, Naichang; He, Jianguo; Yao, Demiao; Dai, Qin; Lin, Weigan

    1995-06-01

    Two types of coplanar transmission lines, rectangular microshield coplanar coupled lines (RMCCL) and coplanar coupled rectangular microshield lines (CCRML), are proposed for MMIC applications. These are developed from coplanar coupled lines (CCL) and coplanar coupled strip lines (CCS). Analytic formulas are presented for calculating the quasistatic TEM parameters of these coupled lines by means of exact conformal mapping techniques. Numerical results are also presented to illustrate the properties of these coplanar transmission lines.

  8. Quiste óseo simple atípico: Presentación de un caso clínico Atypical Simple Bone Cyst: A Case Report

    Directory of Open Access Journals (Sweden)

    L.R González

    2009-02-01

    Full Text Available El quiste óseo simple (sinonimia quiste óseo traumático, quiste óseo solitario, quiste óseo hemorrágico es un pseudoquiste intraóseo desprovisto de recubrimiento epitelial con un contenido seroso y/o hemático que en ocasiones puede estar ausente. Es una patología poco frecuente que afecta a los huesos maxilares con predilección por el maxilar inferior. El objetivo del presente trabajo es presentar un caso de quiste óseo simple en maxilar inferior que difiere de los habitualmente encontrados en los huesos maxilares en cuanto a su presentación clínica, radiográfica e histopatológica.The simple bone cyst (reported in the literature as traumatic bone cyst, solitary bone cyst, hemorrhagic bone cyst is an intraosseous pseudocyst devoid of epithelial lining and filled with serous and/or hematic fluid that may also be lacking. Is a an uncommon condition that usually affects the jaws, with predilection for the lower jaw. The aim of the present work was to report a case of traumatic bone cyst of the jaw that differs from other maxillary bone cysts in its clinical, radiologic, and histologic presentation.

  9. Keeping it simple: flowering plants tend to retain, and revert to, simple leaves.

    Science.gov (United States)

    Geeta, R; Dávalos, Liliana M; Levy, André; Bohs, Lynn; Lavin, Mathew; Mummenhoff, Klaus; Sinha, Neelima; Wojciechowski, Martin F

    2012-01-01

    • A wide range of factors (developmental, physiological, ecological) with unpredictable interactions control variation in leaf form. Here, we examined the distribution of leaf morphologies (simple and complex forms) across angiosperms in a phylogenetic context to detect patterns in the directions of changes in leaf shape. • Seven datasets (diverse angiosperms and six nested clades, Sapindales, Apiales, Papaveraceae, Fabaceae, Lepidium, Solanum) were analysed using maximum likelihood and parsimony methods to estimate asymmetries in rates of change among character states. • Simple leaves are most frequent among angiosperm lineages today, were inferred to be ancestral in angiosperms and tended to be retained in evolution (stasis). Complex leaves slowly originated ('gains') and quickly reverted to simple leaves ('losses') multiple times, with a significantly greater rate of losses than gains. Lobed leaves may be a labile intermediate step between different forms. The nested clades showed mixed trends; Solanum, like the angiosperms in general, had higher rates of losses than gains, but the other clades had higher rates of gains than losses. • The angiosperm-wide pattern could be taken as a null model to test leaf evolution patterns in particular clades, in which patterns of variation suggest clade-specific processes that have yet to be investigated fully. © 2011 The Authors. New Phytologist © 2011 New Phytologist Trust.

  10. A simple solution for complicated pleural effusions.

    Science.gov (United States)

    Murthy, Sudish C; Okereke, Ikenna; Mason, David P; Rice, Thomas W

    2006-09-01

    Complicated pleural effusions are difficult to manage with conventional strategies. In this study, we review the safety, efficacy, and durability of PleurX catheters (Denver Biomedical, Golden, CO) for managing complicated pleural effusions and describe a patient population who might benefit. From July 1999 to February 2003, 63 PleurX catheters were placed in 58 symptomatic patients (an additional five had bilateral catheters) to manage complicated pleural effusions. Patients selected for catheter placement tended to have poor performance status (Eastern Cooperative Oncology Group < or =2) or had failed standard therapies. Of the 63 catheters, 52 (83%) were placed because of malignant complicated pleural effusions. A registry of patients was constructed, and data were obtained from review of medical records. Nonparametric estimates of freedom from reintervention and overall survival were obtained by the Kaplan-Meier method. Catheter-related complications were noted in four of 58 patients (7%) and included one each of pneumothorax, seroma, empyema, and pain syndrome. Freedom from reintervention for effusion management was 95%. Of the patients, 86% (50 of 58) experienced dyspnea relief. There were no procedure-related mortalities. Catheters remained functional up to 330 days, and four of 63 (6%) required one-time thrombolysis with tissue plasminogen activator. PleurX catheters are safe, effective, and durable solutions for complicated pleural effusions and seem to provide an attractive alternative for patients who have few other palliative options. We consider the catheters as first-line therapy for these patients.

  11. A simple method for defining malaria seasonality

    Directory of Open Access Journals (Sweden)

    Smith Lucy

    2009-12-01

    Full Text Available Abstract Background There is currently no standard way of defining malaria seasonality, resulting in a wide range of definitions reported in the literature. Malaria cases show seasonal peaks in most endemic settings, and the choice and timing for optimal malaria control may vary by seasonality. A simple approach is presented to describe the seasonality of malaria, to aid localized policymaking and targeting of interventions. Methods A series of systematic literature reviews were undertaken to identify studies reporting on monthly data for full calendar years on clinical malaria, hospital admission with malaria and entomological inoculation rates (EIR. Sites were defined as having 'marked seasonality' if 75% or more of all episodes occurred in six or less months of the year. A 'concentrated period of malaria' was defined as the six consecutive months with the highest cumulative proportion of cases. A sensitivity analysis was performed based on a variety of cut-offs. Results Monthly data for full calendar years on clinical malaria, all hospital admissions with malaria, and entomological inoculation rates were available for 13, 18, and 11 sites respectively. Most sites showed year-round transmission with seasonal peaks for both clinical malaria and hospital admissions with malaria, with a few sites fitting the definition of 'marked seasonality'. For these sites, consistent results were observed when more than one outcome or more than one calendar year was available from the same site. The use of monthly EIR data was found to be of limited value when looking at seasonal variations of malaria transmission, particularly at low and medium intensity levels. Conclusion The proposed definition discriminated well between studies with 'marked seasonality' and those with less seasonality. However, a poor fit was observed in sites with two seasonal peaks. Further work is needed to explore the applicability of this definition on a wide-scale, using routine

  12. Simple Model for Detonation Energy and Rate

    Science.gov (United States)

    Lauderbach, Lisa M.; Souers, P. Clark

    2017-06-01

    A simple model is used to derive the Eyring equation for the size effect and detonation rate, which depends on a constant energy density. The rate derived from detonation velocities is then converted into a rate constant to be used in a reactive flow model. The rate might be constant if the size effect curve is straight, but the rate constant will change with the radius of the sample and cannot be a constant. This is based on many careful cylinder tests have been run recently on LX-17 with inner copper diameters ranging from 12.7 to 101.6 mm. Copper wall velocities at scaled displacements of 6, 12.5 and 19 mm equate to values at relative volumes of 2.4, 4.4 and 7.0. At each point, the velocities from 25.4 to 101.6 mm are constant within error whereas the 12.7 mm velocities are lower. Using the updated Gurney model, the energy densities at the three larger sizes are also constant. Similar behavior has been seen in LX-14, LX-04, and an 83% RDX mix. A rough saturation has also been in old ANFO data for diameters of 101.6 mm and larger. Although the energy densities saturate, the detonation velocities continue to increase with size. These observations suggest that maximum energy density is a constant for a given explosive of a given density. The correlation of energy density with detonation velocity is not good because the latter depends on the total energy of the sample. This work performed under the auspices of the U. S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  13. Classification of Simple Oxides: A Polarizability Approach

    Science.gov (United States)

    Dimitrov, Vesselin; Komatsu, Takayuki

    2002-01-01

    A simple oxide classification has been proposed on the basis of correlation between electronic polarizabilities of the ions and their binding energies determined by XPS. Three groups of oxides have been considered taking into account the values obtained on refractive-index- or energy-gap-based oxide ion polarizability, cation polarizability, optical basicity, O 1s binding energy, metal (or nonmetal) binding energy, and Yamashita-Kurosawa's interaction parameter of the oxides. The group of semicovalent predominantly acidic oxides includes BeO, B2O3, P2O5, SiO2, Al2O3, GeO2, and Ga2O3 with low oxide ion polarizability, high O 1s binding energy, low cation polarizability, high metal (or nonmetal) outermost binding energy, comparatively low optical basicity, and strong interionic interaction, leading to the formation of strong covalent bonds. Some main group oxides so-called ionic or basic such as CaO, In2O3, SnO2, and TeO2 and most transition metal oxides show relatively high oxide ion polarizability, O 1s binding energy in a very narrow medium range, high cation polarizability, and low metal (or nonmetal) binding energy. Their optical basicity varies in a narrow range and it is close to that of CaO. The group of very ionic or very basic oxides includes CdO, SrO, and BaO as well as PbO, Sb2O3, and Bi2O3, which possess very high oxide ion polarizability, low O 1s binding energy, very high cation polarizability, and very low metal (or nonmetal) binding energy. Their optical basicity is higher than that of CaO and the interionic interaction is very weak, giving rise to the formation of very ionic chemical bonds.

  14. A simple deep monitoring well dilution technique.

    Science.gov (United States)

    Rogiers, Bart; Labat, Serge; Gedeon, Matej; Vandersteen, Katrijn

    2015-04-01

    Well dilution techniques are well known and studied as one of the basic techniques to quantify groundwater fluxes. A typical well dilution test consists of the injection of a tracer, a mixing mechanism (e.g. water circulation with a pump) to achieve a homogeneous concentration distribution within the well, and monitoring of the evolution of tracer concentration with time. An apparent specific discharge can be obtained from such a test, and when details on the well construction are known, it can be converted into a specific discharge representative of the undisturbed aquifer. For deep wells however, the injection of tracer becomes less practical and the use of pumps for circulating and mixing the water becomes problematic. This is due to the limited pressure that common pumps can endure at the outlet, as well as the large volume of water that makes it difficult to achieve a homogeneous concentration, and the impracticalities of getting a lot of equipment to large depths in very small monitoring wells. Injection and monitoring of tracer at a specific depth omits several of the problems with deep wells. We present a very simple device that can be used to perform a dilution test at a specific depth in deep wells. The injection device consists of a PVC tube with a detachable rubber seal at its bottom. To minimize disturbance of the water column in the well, we integrated an EC sensor in this injection device, which enables us to use demineralized water or dissolved salts as a tracer. Once at the target depth, the PVC tube is retracted and the EC sensor and tracer become subject to groundwater flow. The device was tested on a shallow well, on which different types of dilution tests were performed. The results of the other tests agree well with the injection tube results. Finally, the device was used to perform a dilution test in a deep well in order to demonstrate the feasibility of the approach.

  15. Transfer of Training in Simple Addition.

    Science.gov (United States)

    Chen, Yalin; Campbell, Jamie I D

    2017-04-18

    In recent years several researchers have proposed that skilled adults may solve single-digit addition problems (e.g. 3 + 1 = 4, 4 + 3 = 7) using a fast counting procedure. Practicing a procedure, often leads to transfer of learning and faster performance of unpracticed items. Such transfer has been demonstrated using a counting-based alphabet arithmetic task (e.g., B + 4 = C D E F) that indicated robust generalization of practice (i.e., RT gains) when untrained transfer problems at test had been implicitly practiced (e.g., practice B + 3, test B + 2 or B + 1). Here we constructed analogous simple addition problems (practice 4 + 3, test 4 + 2 or 4 + 1). In each of three experiments (total n = 108) participants received six practice blocks followed by two test blocks of new problems to examine generalization effects. Practice of addition identity-rule problems (i.e., 0 + N = N) showed complete transfer of RT gains made during practice to unpracticed items at test. In contrast, the addition ties (2 + 2, 3 + 3, etc.) presented large RT costs for unpracticed problems at test, but sped up substantially in the second test block. This pattern is consistent with item-specific strengthening of associative memory. The critical items were small non-tie additions (sum ≤ 10) for which the test problems would be implicitly practiced if counting was employed during practice. In all three experiments (and collectively) there was no evidence of generalization for these items in the first test block, but there was robust speed up when the items were repeated in the second test block. Thus, there was no evidence of the generalization of practice that would be expected if counting procedures mediated our participants' performance on small non-tie addition problems.

  16. Emergent biosynthetic capacity in simple microbial communities.

    Directory of Open Access Journals (Sweden)

    Hsuan-Chao Chiu

    2014-07-01

    Full Text Available Microbes have an astonishing capacity to transform their environments. Yet, the metabolic capacity of a single species is limited and the vast majority of microorganisms form complex communities and join forces to exhibit capabilities far exceeding those achieved by any single species. Such enhanced metabolic capacities represent a promising route to many medical, environmental, and industrial applications and call for the development of a predictive, systems-level understanding of synergistic microbial capacity. Here we present a comprehensive computational framework, integrating high-quality metabolic models of multiple species, temporal dynamics, and flux variability analysis, to study the metabolic capacity and dynamics of simple two-species microbial ecosystems. We specifically focus on detecting emergent biosynthetic capacity--instances in which a community growing on some medium produces and secretes metabolites that are not secreted by any member species when growing in isolation on that same medium. Using this framework to model a large collection of two-species communities on multiple media, we demonstrate that emergent biosynthetic capacity is highly prevalent. We identify commonly observed emergent metabolites and metabolic reprogramming patterns, characterizing typical mechanisms of emergent capacity. We further find that emergent secretion tends to occur in two waves, the first as soon as the two organisms are introduced, and the second when the medium is depleted and nutrients become limited. Finally, aiming to identify global community determinants of emergent capacity, we find a marked association between the level of emergent biosynthetic capacity and the functional/phylogenetic distance between community members. Specifically, we demonstrate a "Goldilocks" principle, where high levels of emergent capacity are observed when the species comprising the community are functionally neither too close, nor too distant. Taken together

  17. Louisiana ESI: ROADS (Road Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...

  18. Line bundles and flat connections

    Indian Academy of Sciences (India)

    0344-5. Line bundles and flat connections. INDRANIL BISWAS1,∗ and GEORG SCHUMACHER2. 1School of Mathematics, Tata Institute of Fundamental Research, Homi Bhabha Road,. Mumbai 400 005, India. 2Fachbereich Mathematik und ...

  19. Base Flood Elevation (BFE) Lines

    Data.gov (United States)

    Department of Homeland Security — The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally if...

  20. Measures for Software Product Lines

    National Research Council Canada - National Science Library

    Zubrow, Dave

    2003-01-01

    This technical note characterizes the status of measurement associated with the operation of a software product line, suggests a small set of measures to support its management, and provides guidance...