Management of skeletal Class III malocclusion with face mask therapy and comprehensive orthodontic treatment.

Science.gov (United States)

Muthukumar, Kirthika; Vijaykumar, N M; Sainath, M C

2016-01-01

Orthopedic correction of skeletal Class III malocclusion in a growing patient is crucial as it can circumvent future surgical procedures. Further, as surgery is done only at a later stage, early treatment helps to avoid the detrimental effects produced by the facial disfigurement on the patient's social life. This case report describes the treatment of a child aged 9 years 6 months who had a skeletal Class III malocclusion. The treatment plan involved the use of a reverse pull headgear (facemask) and multibracket appliance therapy resulting in successful correction of the malocclusion. The treatment results were highly satisfactory resulting in improved facial esthetics, a skeletal Class I with a Dental Class I molar and canine relationship, an ideal overjet and overbite. Thus, dentoalveolar camouflage, if done in properly selected cases, alleviates the need for surgical intervention. The patient is being monitored until the end of growth to ensure the stability of treatment results.

Management of skeletal Class III malocclusion with face mask therapy and comprehensive orthodontic treatment

Directory of Open Access Journals (Sweden)

Kirthika Muthukumar

2016-01-01

Full Text Available Orthopedic correction of skeletal Class III malocclusion in a growing patient is crucial as it can circumvent future surgical procedures. Further, as surgery is done only at a later stage, early treatment helps to avoid the detrimental effects produced by the facial disfigurement on the patient's social life. This case report describes the treatment of a child aged 9 years 6 months who had a skeletal Class III malocclusion. The treatment plan involved the use of a reverse pull headgear (facemask and multibracket appliance therapy resulting in successful correction of the malocclusion. The treatment results were highly satisfactory resulting in improved facial esthetics, a skeletal Class I with a Dental Class I molar and canine relationship, an ideal overjet and overbite. Thus, dentoalveolar camouflage, if done in properly selected cases, alleviates the need for surgical intervention. The patient is being monitored until the end of growth to ensure the stability of treatment results.

Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report.

Science.gov (United States)

Farret, Marcel Marchiori; Farret, Milton M Benitez; Farret, Alessandro Marchiori

2016-01-01

Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.

The Position of Hyoici Bone in Skeletal Class I, II and III Patients

Directory of Open Access Journals (Sweden)

Ravanmehr H

2000-06-01

Full Text Available In this investigation, the position of hyoid bone was compared in three skeletal groups of class I, II and III. The study was based on evaluating 77 lateral cephalometric radiographs, 40 girls and 37 boys, which were divided into 3 groups. Group 1, 2, and 3 consist of 26, 25, and 26 radiographs. 19 cephalometric landmarks and 10 planes were used in order to tracing the radiographs. In all patients, 9 skeletal and 4 cervical vertebrae parameters were measured to determine the hyoid bone. These parameters were compared between three skeletal groups regardless of sex and then, in another statistical analysis, parameters were compared based on patients sex. Statistical analysis showed that in class III patients, the hyoid bone was positioned more anteriorly than two other groups. Also in this group, the hyoid bone had less inclination and it was more horizontal in relation to mandibular plane. In skeletal class II patients this bone was positioned more superiorly than two other groups. Due to these findings it can be concluded that perimandibular muscles and bones could affect the growth of mandible. In addition, comparison of the parameters between two sexes revealed that the hyoid bone was positioned more anteriorly and inferiorly in boys. Also it was shown that in the girls, the position of hyoid bone was closer to the position of this bone in skeletal class I patients.

Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report

Directory of Open Access Journals (Sweden)

Marcel Marchiori Farret

Full Text Available ABSTRACT Introduction: Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. Objective: To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. Methods: The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. Results: After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.

Skeletal anteroposterior discrepancy and vertical type effects on lower incisor preoperative decompensation and postoperative compensation in skeletal Class III patients.

Science.gov (United States)

Ahn, Hyo-Won; Baek, Seung-Hak

2011-01-01

To determine the initial compensation, preoperative decompensation, and postoperative compensation of the lower incisors according to the skeletal anteroposterior discrepancy and vertical type in skeletal Class III patients. The samples consisted of 68 skeletal Class III patients treated with two-jaw surgery and orthodontic treatment. Lateral cephalograms were taken before preoperative orthodontic treatment (T0) and before surgery (T1) and after debonding (T2). According to skeletal anteroposterior discrepancy/vertical type (ANB, criteria  =  -4°; SN-GoMe, criteria  =  35°) at the T0 stage, the samples were allocated into group 1 (severe anteroposterior discrepancy/hypodivergent vertical type, N  =  17), group 2 (moderate anteroposterior discrepancy/hypodivergent vertical type, N  =  17), group 3 (severe anteroposterior discrepancy/hyperdivergent vertical type, N  =  17), or group 4 (moderate anteroposterior discrepancy/hyperdivergent vertical type, N  =  17). After measurement of variables, one-way analysis of variance with Duncan's multiple comparison test, crosstab analysis, and Pearson correlation analysis were performed. At T0, groups 3 and 2 exhibited the most and least compensated lower incisors. In group 2, good preoperative decompensation and considerable postoperative compensation resulted in different values for T0, T1, and T2 (IMPA, T0 lower incisors in Class III patients.

Orthodontic camouflage in the case of a skeletal class III malocclusion.

Science.gov (United States)

Costa Pinho, Teresa M; Ustrell Torrent, Josep M; Correia Pinto, João G R

2004-01-01

To describe the clinical problem of a male patient, 15 years of age, who had a dolichofacial biotype and a Class III skeletal type at the beginning of treatment, manifesting itself at the dental level. To resolve the dental problems, orthodontic camouflage (dentoalveolar compensation) with the extraction of two mandibular premolars was performed. This procedure allowed a more harmonious occlusal relationship at the canine level and provided better occlusal stability of the final result. The procedure choice was based on the fact that some cephalometric values were favorable to attenuation of the skeletal Class III. For example, according to the analyses of Björk and Jarabak, these values are the total sum of 1, 2, 3 (sella angle, articular angle, and gonial angles) and the anterior/posterior facial height (S-Go/Na-Me). However, the same cephalometric data indicate a possible worsening of the existing open bite, which might be corrected with dental extractions and the use of intermaxillary elastics.

Early orthopedic correction of skeletal Class III malocclusion using combined reverse twin block and face mask therapy

Directory of Open Access Journals (Sweden)

Vinay Kumar Chugh

2015-01-01

Full Text Available A 6-year 8-month-old girl presented with a moderate Class III malocclusion characterized by mid-face deficiency and an anterior cross bite. In the first phase, the patient was treated with combination of reverse twin block and facemask therapy. In phase two, fixed appliances were placed in the permanent dentition. The post treatment results were good and a favorable growth tendency could be observed. The correction of the Class III malocclusion occurred by a combination of skeletal and dental improvements. This report shows successful correction of skeletal Class III malocclusion in the early transitional dentition using combination therapy.

Skeletal Class III and anterior open bite treatment with different retention protocols: a report of three cases.

Science.gov (United States)

Farret, Milton Meri Benitez; Farret, Marcel Marchiori; Farret, Alessandro Marchiori

2012-09-01

The treatment of skeletal class III and anterior open bite can be unstable and orthodontists frequently observe relapse. Here, we report on the management of three patients with skeletal class III profiles and open bites treated by orthodontic camouflage. Each received a retention protocol involving the use of two separate appliances during the night and day accompanied by myofunctional therapy. Long-term follow-up revealed a stable outcome.

Camouflage treatment of skeletal class III malocclusion with asymmetry using a bone-borne rapid maxillary expander.

Science.gov (United States)

Seo, Yu-Jin; Chung, Kyu-Rhim; Kim, Seong-Hun; Nelson, Gerald

2015-03-01

This case report presents the successful use of palatal mini-implants for rapid maxillary expansion and mandibular distalization in a skeletal Class III malocclusion. The patient was a 13-year-old girl with the chief complaint of facial asymmetry and a protruded chin. Camouflage orthodontic treatment was chosen, acknowledging the possibility of need for orthognathic surgery after completion of her growth. A bone-borne rapid expander (BBRME) was used to correct the transverse discrepancy and was then used as indirect anchorage for distalization of the lower dentition with Class III elastics. As a result, a Class I occlusion with favorable inclination of the upper teeth was achieved without any adverse effects. The total treatment period was 25 months. Therefore, BBRME can be considered an alternative treatment in skeletal Class III malocclusion.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

OpenAIRE

Farret,Marcel Marchiori

2016-01-01

ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end...

Skeletal Class III malocclusion with thin symphyseal bone: a case report.

Science.gov (United States)

Hikida, Eriko; Tanikawa, Chihiro

2012-11-01

To describe the management of a severe skeletal Class III patient with thin symphyseal bone and alveolar bone covering the mandibular incisors. A 24 year-old female presented with a skeletal Class III malocclusion characterised by thin alveolar bone in a mildly crowded, mandibular incisor region. Computerised tomography (CT) assisted in the determination of possible tooth movement within the anterior mandibular alveolar bone. The finalised treatment plan aimed to align the maxillary and mandibular dental arches following the extraction of the maxillary right first premolar and the mandibular right permanent lateral incisor. The surgical repositioning of the maxilla and mandible with a LeFort I osteotomy and a bilateral sagittal split osteotomy (BSSO) would follow. After treatment, an acceptable facial profile and a solid intercuspation of the teeth were obtained. Significant root resorption was not observed. The occlusion remained stable with normal overjet and overbite after two years of retention. CT examination provided an assessment of the three-dimensional morphological characteristics of anterior alveolar bone which enabled an evaluation of possible tooth movement.

Combination of expansion and orthognathic surgery in a severe hyperdivergent skeletal Class III malocclusion

Directory of Open Access Journals (Sweden)

Anadha Gujar

2016-01-01

Full Text Available Class III malocclusions with a severe hyperdivergent growth pattern are very complex to plan and treat. This case report describes the treatment of an adult with a skeletal Class III malocclusion with a midface deficiency, severe bilateral posterior crossbite, and a severe hyperdivergent growth pattern by a combination of a bonded rapid maxillary expansion appliance and surgical procedure of Le Fort I osteotomy for maxillary advancement.

Craniofacial changes in Class III malocclusion as related to skeletal and dental maturation.

Science.gov (United States)

Baccetti, Tiziano; Reyes, Brian C; McNamara, James A

2007-08-01

In this large cross-sectional study, we aimed to analyze growth trends in white subjects with Class III malocclusion using both skeletal and dental maturation staging. The sample consisted of 1091 pretreatment lateral cephalometric records of Class III patients (560 female, 531 male). Cephalometric dentoskeletal measurements were compared at subsequent stages in cervical vertebral maturation and Hellman's categorization of dental development by means of ANOVA with Bonferroni post-hoc tests in both sexes separately. The findings indicated that, in Class III malocclusion, the pubertal peak in mandibular growth occurs between stages 3 and 4 of cervical vertebral maturation, with average increases in total mandibular length of about 8 and 5.5 mm in Class III boys and girls, respectively. Significant changes in total mandibular length occur until young adulthood (18 years on average), with increases between late maturation stages (4 through 6) that were twice as large as in subjects with normal occlusion for the Class III females, and 3 times as large as in subjects with normal occlusion for the Class III males. Growth trends toward accentuated Class III profile and increased vertical dimension of the face also become apparent at late developmental stages (corresponding with complete eruption of the second and third molars).

Radiographic cephalometry assessment of the linear and angular parameters on cranial base in children with skeletal class III

Directory of Open Access Journals (Sweden)

Stojanović Zdenka M.

2007-01-01

Full Text Available Background/Aim. In malocclusion of skeletal class III, mandible is located in front of maxilla in sagital plain, which is manifested by a lower value of the sagital inter-jaw angle than in skeletal class I, where the jaw sagital relation is normal. Apart from the deformities on mandible and/or maxilla, in skeletal class III deformities are also frequent on the cranial base. The aim of this research was to find the differences in the parameter values on the cranial base among the children with skeletal class III and the children with skeletal class I in the period of mixed dentition. Methods. After clinical examination and orthopan-tomography, profile radiography of the head was analyzed in 60 examinees, aged from 6−12 years. The examinees were divided into two groups: group 1 - the children with skeletal class III; group 2 - the children with skeletal class I. Both linear and angular parameters on the cranial base were measured, as well as the angles of maxillary and mandible prognatism and the angle of sagital inter-jaw relation. The level of difference in the parameter values between the groups was estimated and the degree of correlation of the main angle of the cranial base with the angles of sagital position of the jaws in each of the two groups was established. Results. A significant difference between the groups was found only in the average values of the angles of maxillary prognatism and sagital interjaw relation. In the group 1, the main angle of the cranial base was in a significant correlation with the angles of sagital positions of the jaws, while in the group 2, such significance was not found. Conclusion. There were no significant differences in the parameter values on the cranial base between the groups. There was a significant correlation of the main angle of the cranial base with the angles of sagital position of the jaws in the group 1 only. .

Bone thickness of the infrazygomatic crest area in skeletal Class III growing patients: A computed tomographic study

International Nuclear Information System (INIS)

Lee, Hyub Soo; Choi, Hang Moon; Choi, Dong Soon; Jang, Insan; Cha, Bong Kuen

2013-01-01

This study was performed to investigate the bone thickness of the infrazygomatic crest area by computed tomography (CT) for placement of a miniplate as skeletal anchorage for maxillary protraction in skeletal Class III children. CT images of skeletal Class III children (7 boys, 9 girls, mean age: 11.4 years) were taken parallel to the Frankfurt horizontal plane. The bone thickness of the infrazygomatic crest area was measured at 35 locations on the right and left sides, perpendicular to the bone surface. The bone was thickest (5.0 mm) in the upper zygomatic bone and thinnest (1.1 mm) in the anterior wall of the maxillary sinus. Generally, there was a tendency for the bone to be thicker at the superior and lateral area of the zygomatic process of the maxilla. There was no clinically significant difference in bone thickness between the right and left sides; however, it was thicker in male than in female subjects. In the infrazygomatic crest area, the superior and lateral area of the zygomatic process of the maxilla had the most appropriate thickness for placement of a miniplate in growing skeletal Class III children with a retruded maxilla.

Bone thickness of the infrazygomatic crest area in skeletal Class III growing patients: A computed tomographic study

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyub Soo; Choi, Hang Moon; Choi, Dong Soon; Jang, Insan; Cha, Bong Kuen [College of Dentistry and Research Institute of Oral Science, Gangneung-Wonju National University, Gangneung (Korea, Republic of)

2013-12-15

This study was performed to investigate the bone thickness of the infrazygomatic crest area by computed tomography (CT) for placement of a miniplate as skeletal anchorage for maxillary protraction in skeletal Class III children. CT images of skeletal Class III children (7 boys, 9 girls, mean age: 11.4 years) were taken parallel to the Frankfurt horizontal plane. The bone thickness of the infrazygomatic crest area was measured at 35 locations on the right and left sides, perpendicular to the bone surface. The bone was thickest (5.0 mm) in the upper zygomatic bone and thinnest (1.1 mm) in the anterior wall of the maxillary sinus. Generally, there was a tendency for the bone to be thicker at the superior and lateral area of the zygomatic process of the maxilla. There was no clinically significant difference in bone thickness between the right and left sides; however, it was thicker in male than in female subjects. In the infrazygomatic crest area, the superior and lateral area of the zygomatic process of the maxilla had the most appropriate thickness for placement of a miniplate in growing skeletal Class III children with a retruded maxilla.

Orthognathic Surgery for the Correction of Severe Skeletal Class III Malocclusion.

Science.gov (United States)

Kafle, D; Upadhayaya, C; Chaurasia, N; Agarwal, A

2016-01-01

Skeletal Malocclusions results from the abnormal position of maxilla and mandible in relation with cranial base. These types of malocclusion are commonly treated by orthodontic teeth movement known as camouflage orthodontics. However severe skeletal malocclusions cannot be treated by orthodontics alone. Such cases need surgical intervention to align the position of the jaw along with orthodontic correction. This procedure is commonly known as Orthognathic Surgery. Orthognathic Surgery dates back to early eighteenth century but became popular on mid twentieth century. Though the prevalence of skeletal malocclusion is more than 1% the treatment facility was not available in Nepal till 2012. Here we present a case of Skeletal Class III malocclusion treated at Dhulikhel Hospital, Kathmandu University Hospital. For this case, double jaw surgery was performed by le-Fort I osteotomy and Bilateral Sagital Split Osteotomy. Orthognathic surgery has been routinely performed at this centre since then.

Kinematic analysis of mandibular motion before and after orthognathic surgery for skeletal Class III malocclusion: A pilot study.

Science.gov (United States)

Ugolini, Alessandro; Mapelli, Andrea; Segù, Marzia; Galante, Domenico; Sidequersky, Fernanda V; Sforza, Chiarella

2017-03-01

The aim of the study was to detect the changes in 3D mandibular motion after orthognathic surgery for skeletal Class III malocclusion. Using a 3D motion analyzer, free mandibular border movements were recorded in nine patients successfully treated for skeletal Class III malocclusion and in nine patients scheduled for orthognathic surgery. Data were compared using Mann-Whitney non-parametric U-test. The results showed no differences between the groups in the total amount of mouth opening, protrusion, and in lateral excursions, but the percentage of mandibular movement explained by condylar translation was significantly increased after surgery (20% vs. 23.6%). During opening, the post-surgery patients showed a more symmetrical mandibular interincisal point and condylar path than pre-surgery patients (p < 0.01). Patients treated with orthognathic surgery for skeletal Class III malocclusion recover a good and symmetric temporomandibular joint function.

Non-surgical Management of Skeletal Class III Malocclusion with Bilateral Posterior Crossbite: A Case Report.

Science.gov (United States)

Kumari, Lalima; Nayan, Kamal

2016-12-01

A 16-year-old female patient with skeletal Class III malocclusion and bilateral posterior cross bite complaining of difficulty in chewing was treated orthodontically without surgery (camouflage treatment). The treatment comprised of fixed orthodontic treatment with MBT prescription (0.022˝×0.028˝ slot) using quad helix appliance for bilateral expansion of maxillary arch and Class III elastics for occlusal correction. Post-treatment records showed normal overbite and overjet with acceptable occlusion. So with this treatment strategy of expanding the maxillary arch using a quad helix appliance and use of Class III elastics, we achieved a good result with optimal occlusion.

Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite

OpenAIRE

José Valladares Neto

2014-01-01

INTRODUCTION: This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. METHODS: The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extr...

DIAGNOSTIC GUIDANCE AND EARLY INTERVENTION IN CLASS III MALOCCLUSION

Directory of Open Access Journals (Sweden)

Rinandri Charea Runizar

2015-06-01

Full Text Available Timing of orthodontic treatment for Class III malocclusion has always been somewhat controversial. Many orthodontic pioneers like Angle, Tweed, and Graber have advocated early interception of class II malocclusion because this kind of skeletal discrepancy once established, would usually progress rapidly. What kind of early treatment would be appropriate for this malocclusion? Would this approach be effective and promises a stable result? Early orthodontic treatment is defined as a treatment that is initiated during the primary or mixed dentition stage to enhance skeletal and dental development. It is usually done in two phases. The first phase is intended to correct skeletal discrepancy by taking advantage of growth and development period. The second phase followed to improve occlusal relationship. Early treatment of Class III malocclusion is a possible alternative to improve skeletal discrepancy or at the very east may serve to prevent a worsening malocclusion. Principles of Class III early treatment depend on whether it is dental Class III, functional Class III, or skeletal Class III. Practitioners should consider positive and negative factors of a patient before initiating treatment. Likewise, they should understand factors that affect prognosis and stability of the results.

Lower incisor dentoalveolar compensation and symphysis dimensions among Class I and III malocclusion patients with different facial vertical skeletal patterns.

Science.gov (United States)

Molina-Berlanga, Núria; Llopis-Perez, Jaume; Flores-Mir, Carlos; Puigdollers, Andreu

2013-11-01

To compare lower incisor dentoalveolar compensation and mandible symphysis morphology among Class I and Class III malocclusion patients with different facial vertical skeletal patterns. Lower incisor extrusion and inclination, as well as buccal (LA) and lingual (LP) cortex depth, and mandibular symphysis height (LH) were measured in 107 lateral cephalometric x-rays of adult patients without prior orthodontic treatment. In addition, malocclusion type (Class I or III) and facial vertical skeletal pattern were considered. Through a principal component analysis (PCA) related variables were reduced. Simple regression equation and multivariate analyses of variance were also used. Incisor mandibular plane angle (P Class I P  =  .03 and Class III P  =  .01) and a positive correlation with LH (Class I P  =  .01 and Class III P  =  .02) in both groups. Within the Class III group, there was a negative correlation between the mandibular plane and LP (P  =  .02). PCA showed that the tendency toward a long face causes the symphysis to elongate and narrow. In Class III, alveolar narrowing is also found in normal faces. Vertical facial pattern is a significant factor in mandibular symphysis alveolar morphology and lower incisor positioning, both for Class I and Class III patients. Short-faced Class III patients have a widened alveolar bone. However, for long-faced and normal-faced Class III, natural compensation elongates the symphysis and influences lower incisor position.

Surgical-orthodontic treatment of a skeletal class III malocclusion.

Science.gov (United States)

Katiyar, Radha; Singh, G K; Mehrotra, Divya; Singh, Alka

2010-07-01

For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment option left. One indication for surgery obviously is a malocclusion too severe for orthodontics alone. It is possible now to be at least semiquantitative about the limits of orthodontic treatment, in the context of producing normal occlusion as the diagrams of the "envelope of discrepancy" indicate. In this case report we present orthognathic treatment plan of an adult female patient with skeletal class III malocclusion. Patient's malocclusion was decompensated by orthodontic treatment just before the surgery and then normal jaw relationship achieved by bilateral sagittal split osteotomy.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern.

Science.gov (United States)

Farret, Marcel Marchiori

2016-06-01

This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO.

Surgical–orthodontic treatment of a skeletal class III malocclusion

Science.gov (United States)

Katiyar, Radha; Singh, G. K.; Mehrotra, Divya; Singh, Alka

2010-01-01

For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment option left. One indication for surgery obviously is a malocclusion too severe for orthodontics alone. It is possible now to be at least semiquantitative about the limits of orthodontic treatment, in the context of producing normal occlusion as the diagrams of the “envelope of discrepancy” indicate. In this case report we present orthognathic treatment plan of an adult female patient with skeletal class III malocclusion. Patient's malocclusion was decompensated by orthodontic treatment just before the surgery and then normal jaw relationship achieved by bilateral sagittal split osteotomy. PMID:22442586

A three-dimensional analysis of skeletal and dental characteristics in skeletal class III patients with facial asymmetry.

Science.gov (United States)

Yu, Jinfeng; Hu, Yun; Huang, Mingna; Chen, Jun; Ding, Xiaoqian; Zheng, Leilei

2018-03-15

To evaluate the skeletal and dental characteristics in skeletal class III patients with facial asymmetry and to analyse the relationships among various parts of the stomatognathic system to provide a theoretical basis for clinical practice. Asymmetric cone-beam computed tomography data acquired from 56 patients were evaluated using Mimics 10.0 and 3-Matic software. Skeletal and dental measurements were performed to assess the three-dimensional differences between two sides. Pearson correlation analysis was used to determine the correlations among measurements. Linear measurements, such as ramal height, mandible body length, ramal height above the sigmoid notch (RHASN), maxillary height, condylar height, buccal and total cancellous bone thickness, and measurements of condylar size, were significantly larger on the nondeviated side than on the deviated side (P orthodontic camouflage has limitations and potential risks. A combination of orthodontics and orthognathic surgery may be the advisable choice in patients with a menton deviation greater than 4 mm. An important association between vertical skeletal disharmony and dental compensation was also observed.

Skeletal changes, dental and face of class III skeletal malocclusion treated with philosophy MEAW (Multiloop Edgewise Arch Wire: a descriptive retrospective

Directory of Open Access Journals (Sweden)

Ángela Anyur García Bernal

2013-07-01

Plano (PP increase of 114,3°a 115,4° and the occlusal plane inclination increased from 17,8°a 24,7°. The average treatment time was 19,4 months. Conclusions: MEAW philosophy is a therapeutic alternative camouflage in the treatment of skeletal Class III malocclusions.

Treatment of skeletal class III malocclusion using face mask therapy with alternate rapid maxillary expansion and constriction (Alt-RAMEC protocol

Directory of Open Access Journals (Sweden)

Anand Ramchandra Rathi

2015-01-01

Full Text Available Class III malocclusion is very common malocclusion and can be due to maxillary retrusion, mandibular prognathism, or combination. Ellis and McNamara found a combination of maxillary retrusion and mandibular protrusion to be the most common skeletal relationship (30%. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. Reverse pull head gear combined with maxillary expansion can effectively correct skeletal Class III malocclusion due to maxillary deficiency in growing patient. An eight-year-old female patient with chief complaint of prognathic mandible and anterior crossbite was successfully treated in duration of 5 months with facemask and expansion therapy based on Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC protocol.

Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

Directory of Open Access Journals (Sweden)

Seyed Mohammadreza Safavi

2013-01-01

Full Text Available In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen due to collision with adjacent roots. This article showcases mandibular molar distalization utilizing miniscrews, inserted at the retromolar area to correct a Class-III problem. A 24-year-old girl with a mild skeletal Class-III malocclusion and dental Class-III molar and canine relationship bilaterally was referred for orthodontic treatment. The treatment plan included distalization of the lower molars bilaterally followed by full fixed appliance therapy, after third molar extractions. For the lower molar distalization, the miniscrews were inserted at the retromolar pad. At the end of 21 months, a Class-I molar and canine relationship, normal overjet and overbite were obtained. The average amount of distalization of mandibular first molar was 3.2 mm at the crown level. In conclusion, placing miniscrews at the retromolar pad area for lower molar distalization was found to be a simple and effective method for correcting anterior cross bite and mandibular anterior crowding or protrusion, without the need for patient compliance.

Expansion/Facemask Treatment of an Adult Class III Malocclusion.

Science.gov (United States)

Jackson, Gregory W; Kravitz, Neal D

2014-01-01

The orthodontic treatment of class III malocclusion with a maxillary deficiency is often treated with maxillary protraction with or without expansion. Skeletal and dental changes have been documented which have combined for the protraction of the maxilla and the correction of the class III malocclusion. Concerning the ideal time to treat a developing class III malocclusion, studies have reported that, although early treatment may be the most effective, face mask therapy can provide a viable option for older children as well. But what about young adults? Can the skeletal and dental changes seen in expansion/facemask therapy in children and adolescents be demonstrated in this age group as well, possibly eliminating the need for orthodontic dental camouflage treatment or orthognathic surgery? A case report is presented of an adult class III malocclusion with a Class III skeletal pattern and maxillary retrusion. Treatment was with nonextraction, comprehensive edgewise mechanics with slow maxillary expansion with a bonded expander and protraction facemask.

Expansion/Facemask Treatment of an Adult Class III Malocclusion

Directory of Open Access Journals (Sweden)

Gregory W. Jackson

2014-01-01

Full Text Available The orthodontic treatment of class III malocclusion with a maxillary deficiency is often treated with maxillary protraction with or without expansion. Skeletal and dental changes have been documented which have combined for the protraction of the maxilla and the correction of the class III malocclusion. Concerning the ideal time to treat a developing class III malocclusion, studies have reported that, although early treatment may be the most effective, face mask therapy can provide a viable option for older children as well. But what about young adults? Can the skeletal and dental changes seen in expansion/facemask therapy in children and adolescents be demonstrated in this age group as well, possibly eliminating the need for orthodontic dental camouflage treatment or orthognathic surgery? A case report is presented of an adult class III malocclusion with a Class III skeletal pattern and maxillary retrusion. Treatment was with nonextraction, comprehensive edgewise mechanics with slow maxillary expansion with a bonded expander and protraction facemask.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

Directory of Open Access Journals (Sweden)

Marcel Marchiori Farret

Full Text Available ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as one of the requirements to become diplomate by the BBO.

Glenoid fossa position in Class III malocclusion associated with mandibular protrusion.

Science.gov (United States)

Innocenti, Cristina; Giuntini, Veronica; Defraia, Efisio; Baccetti, Tiziano

2009-04-01

Our aim in this study was to investigate the position of the glenoid fossa in subjects with Class III malocclusion associated with mandibular protrusion to better clarify the role of this craniofacial component in Class III skeletal disharmony. A sample of 30 subjects, aged 8 years +/- 6 months, with skeletal and dental Class III malocclusion associated with mandibular protrusion, normal skeletal vertical relationships, and normal mandibular dimensions, was compared with a control group of 33 subjects with skeletal and dental Class I relationships. The comparisons between the Class III group and the control group on the cephalometric measures for the assessment of glenoid fossa position were performed with the Mann-Whitney U test at P <0.05. Subjects with Class III malocclusion had a significantly more mesial position of the glenoid fossa, when compared with the control group as measured with 3 parameters. An anterior position of the glenoid fossa is a possible diagnostic anatomic feature of Class III malocclusion associated with mandibular protrusion. An effective measurement to evaluate glenoid fossa position in craniofacial relationships is the cephalometric distance from the glenoid fossa to the frontomaxillary-nasal suture.

[Exploration for micro-osteotomy assisted orthodontic treatment of skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region].

Science.gov (United States)

Wang, Bo; Shen, Guo-fang; Fang, Bing; Sun, Liang-yan; Wu, Yong; Jiang, Ling-yong; Zhu, Min

2012-10-01

To investigate the changes of periodontal conditions after micro-osteotomy assisted lower incisor decompensation for skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region. The sample consisted of 22 cases diagnosed as skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region, selected from consecutive patients of Department of Oral & Cranio-maxillofacial Science of Shanghai Ninth People's Hospital during 2009-2012. The samples were divided into 2 groups; G1 comprised 10 patients who accepted micro-osteotomy assisted lower incisor decompensation; G2 comprised 12 patients who chose traditional pre-surgical decomposition. The changes of periodontal conditions of both groups were evaluated with the help of cone-beam CT(CBCT). Data was processed using SAS8.02 software package. For subjects in G1, during the micro-osteotomy assisted pre-surgical orthodontics, no significant difference was found in the amount of root resorption of lower incisors.But labial and lingual vertical alveolar bone loss were 2.60 mm and 2.22 mm; alveolar bone thickness increased by 3.05 mm on the labial side and decreased by 0.88 mm on the lingual side (Ppre-surgical orthodontics was much safer than traditional orthodontics for skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region.

Mandibular dimensions of subjects with asymmetric skeletal class III malocclusion and normal occlusion compared with cone-beam computed tomography.

Science.gov (United States)

Lee, HyoYeon; Bayome, Mohamed; Kim, Seong-Hun; Kim, Ki Beom; Behrents, Rolf G; Kook, Yoon-Ah

2012-08-01

The purpose of this study was to use cone-beam computed tomography to compare mandibular dimensions in subjects with asymmetric skeletal Class III malocclusion and those with normal occlusion. Cone-beam computed tomography scans of 38 subjects with normal occlusion and 28 patients with facial asymmetry were evaluated and digitized with Invivo software (Anatomage, San Jose, Calif). Three midsagittal and 13 right and left measurements were taken. The paired t test was used to compare the right and left sides in each group. The Mann-Whitney U test was used to compare the midsagittal variables and the differences between the 2 sides of the group with normal occlusion with those of asymmetry patients. The posterior part of the mandibular body showed significant differences between the deviated and nondeviated sides in asymmetric Class III patients. The difference of the asymmetry group was significantly greater than that of the normal occlusion group for the mediolateral ramal and the anteroposterior condylar inclinations (P = 0.007 and P = 0.019, respectively). The asymmetric skeletal Class III group showed significant differences in condylar height, ramus height, and posterior part of the mandibular body compared with the subjects with normal occlusion. These results might be useful for diagnosis and treatment planning of asymmetric Class III patients. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances and lower premolar extractions.

Science.gov (United States)

Abu Alhaija, Elham S J; Al-Khateeb, Susan N

2011-05-01

Mild Class III malocciusions can be treated by upper incisor proclination and lower incisor retroclination following extraction of the lower first premolars. To compare the skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances, Class III traction and lower first premolar extractions with the changes in a group of untreated Class III patients. The Treatment group consisted of 30 Class III patients (Mean age 13.69 +/- 1.48 years) who were treated by upper and lower fixed appliances, Class III intermaxillary traction and lower first premolar extractions for 2.88 +/- 1.12 years. The Control group consisted of 20 untreated Class III patients (Mean age 13.51 +/- 0.95) matched for age and gender. The T1 to T2 changes in the treated and untreated groups were compared using a paired t-test while differences between the two groups were compared with an independent t-test. During treatment, the upper incisors were proclined about 1 degree and the lower incisors were retroclined 8 degrees. Small, but statistically significant changes in SNB, Wits and the overlying soft tissues accompanied the changes in incisor inclination. At the end of treatment a positive overbite and overjet were achieved. The increase in lower facial height in the Treatment group was comparable with the change in the Control group. A range of mild to moderate Class III malocclusions can be treated by dentoalveolar compensation.

Evolution of Class III treatment in orthodontics.

Science.gov (United States)

Ngan, Peter; Moon, Won

2015-07-01

Angle, Tweed, and Moyers classified Class III malocclusions into 3 types: pseudo, dentoalveolar, and skeletal. Clinicians have been trying to identify the best timing to intercept a Class III malocclusion that develops as early as the deciduous dentition. With microimplants as skeletal anchorage, orthopedic growth modification became more effective, and it also increased the scope of camouflage orthodontic treatment for patients who were not eligible for orthognathic surgery. However, orthodontic treatment combined with orthognathic surgery remains the only option for patients with a severe skeletal Class III malocclusion or a craniofacial anomaly. Distraction osteogenesis can now be performed intraorally at an earlier age. The surgery-first approach can minimize the length of time that the malocclusion needs to worsen before orthognathic surgery. Finally, the use of computed tomography scans for 3-dimensional diagnosis and treatment planning together with advances in imaging technology can improve the accuracy of surgical movements and the esthetic outcomes for these patients. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Interdisciplinary orthognathic treatment of high angle class III ...

African Journals Online (AJOL)

For Class III adult patients, combined treatment strategy must be followed which includes either further dentoalveolar compensation or orthognathic surgery following decompensation of the teeth. This case report presents the interdisciplinary approach of a skeletal Class III malocclusion with increased vertical facial ...

Perawatan Maloklusi Kelas III Skeletal dengan Kombinasi Ortodontik-Bedah Orthognatik

Directory of Open Access Journals (Sweden)

Nia Ayu Ismaniati

2015-09-01

Full Text Available Non-growing patient with excessive mandible and underdeveloped of the maxilla who classified as a class III skeletal malocclusion often found in the orthodontic daily practice. If they come earlier when potential growth is still left, sometimes growth modification can be applied to prevent further facial deformity (by using extra-oral device, for instance. In non-growing class III malocclusions, treatment alternative may consist of compromised-treatment without concerning an ideal treatment goal. However, with the development of knowledge and skills and with the potential improvement of interspecialistic team-work, nowadays, ideal facial aesthetics become possible. The combined orthodontic-orthognathic surgical treatment alternative to correct skeletal facial deformity may be a better alternative. This treatment changes the hostile environment, so that a more stable treatment result with better facial appearance can be achieved. This poster presents a case report of severe class III skeletal malocclusion whose treted with combined orthodontic-orthognathic surgery. The facial and dental improvements as well as the cephalometric changes are presented. The procedure of treatment and the interspecialistic team-work will also be briefly described.

Combined orthodontic and surgical treatment of a severe skeletal Class III malocclusion: a case report.

Science.gov (United States)

Nene, Salil; Gautam, Rajaganesh; Sharif, Kanaan; Gupta, Gaurav

2012-01-01

This report describes a combined orthodontic and surgical treatment approach for a severe skeletal Class III malocclusion in a young Indian woman with serious esthetic concerns. The case required significant surgical correction in the anteroposterior and vertical planes, involving surgeries in both the maxilla and the mandible. The case required the use of mini-implant anchorage in the presurgical phase as well as postorthodontic prosthodontic rehabilitation to replace missing posterior teeth to restore the occlusal table.

The duration of pubertal growth peak among three skeletal classes

Directory of Open Access Journals (Sweden)

Waqar Jeelani

Full Text Available ABSTRACT Introduction: Pubertal growth peak is closely associated with a rapid increase in mandibular length and offers a wide range of therapeutic modifiability. Objective: The aim of the present study was to determine and compare the mean ages of onset and duration of pubertal growth peak among three skeletal classes. Methods: A retrospective cross-sectional study was conducted using lateral cephalograms of 230 subjects with growth potential (110 males, 120 females. Subjects were categorized into three classes (Class I = 81, Class II = 82, Class III = 67, according to the sagittal relationship established between the maxilla and the mandible. The cervical vertebral maturation stage was recorded by means of Baccetti's method. The mean ages at CS3 and CS4 and the CS3-CS4 age interval were compared between boys and girls and among three skeletal classes. Results: Pubertal growth peak occurred on average four months earlier in girls than boys (p = 0.050. The average duration of pubertal growth peak was 11 months in Class I, seven months in Class II and 17 months in Class III subjects. Interclass differences were highly significant (Cohen's d > 0.08. However, no significant difference was found in the timing of pubertal growth peak onset among three skeletal classes (p = 0.126 in boys, p = 0.262 in girls. Conclusions: Girls enter pubertal growth peak on average four months earlier than boys. Moreover, the duration of pubertal growth peak is on average four months shorter in Class II and six months longer in Class III subjects as compared to Class I subjects.

Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite.

Science.gov (United States)

Valladares Neto, José

2014-01-01

This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extraction of mandibular first premolars. For maxillary retraction, the vertical dimension was temporarily increased to avoid obstacles to orthodontic movement. At the end of the treatment, ideal overjet and overbite were achieved. Examination eight years after orthodontic treatment revealed adequate clinical stability. This case report was submitted to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO) as part of the requirements to become a BBO diplomate.

Class III camouflage treatment: what are the limits?

Science.gov (United States)

Burns, Nikia R; Musich, David R; Martin, Chris; Razmus, Thomas; Gunel, Erdogan; Ngan, Peter

2010-01-01

The purpose of this study was to determine the skeletal, dental, and soft-tissue changes in response to camouflage Class III treatment. Thirty patients (average age, 12.4 + or - 1.0 years) with skeletal Class III malocclusions who completed comprehensive nonextraction orthodontic treatment were studied. Skeletal, dental, and soft-tissue changes were determined by using published cephalometric analyses. The quality of orthodontic treatment was standardized by registering the peer assessment rating index on the pretreatment and posttreatment study models. The change in the level of gingival attachment with treatment was determined on the study casts. The results were compared with a group of untreated subjects. Data were analyzed with repeated measures analysis and paired t tests. The average change in the Wits appraisal was greater in the treated group (1.2 + or - 0.1 mm) than in the control group (-0.5 + or - 0.3 mm). The average peer assessment rating index score improved from 33.5 to 4.1. No significant differences were found for the level of gingival attachments between the treatment and control groups. The sagittal jaw relationship (ANB angle) did not improve with camouflage treatment. A wide range of tooth movements compensated for the skeletal changes in both groups. The upper and lower limits for incisal movement to compensate for Class III skeletal changes were 120 degrees to the sella-nasion line and 80 degrees to the mandibular plane, respectively. Greater increases in the angle of convexity were found in the treated group, indicating improved facial profiles. Greater increases in length of the upper lip were found in the treated group, corresponding to the changes in the hard tissues with treatment. Significant dental and soft-tissue changes can be expected in young Class III patients treated with camouflage orthodontic tooth movement. A wide range of skeletal dysplasias can be camouflaged with tooth movement without deleterious effects to the

Timely management of developing class III malocclusion

Directory of Open Access Journals (Sweden)

M R Yelampalli

2012-01-01

Full Text Available Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the jaw bases and may result in severe facial deformities. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. This paper deals with the selection of an appropriate appliance from the various current options available for early intervention in developing class III malocclusion through two case reports.

Assessment of pain and discomfort during early orthodontic treatment of skeletal Class III malocclusion using the Removable Mandibular Retractor Appliance.

Science.gov (United States)

Saleh, M; Hajeer, M Y; Al-Jundi, A

2013-06-01

To determine the degree of pain and discomfort during the orthodontic treatment of skeletal Class III malocclusion using the Removable Mandibular Retractor (RMR). The sample consisted of 33 skeletal Class III patients (17 males and 16 females; average age: 7.5 ± 1.33 years) who had been assigned to the RMR treatment group in a randomised controlled trial comparing this treatment versus a control group of no treatment at the Orthodontic Department, University of Al-Baath Dental School in Syria. Pain and discomfort were assessed using standardised questionnaires at the following assessment times: 7 days (T1), 14 days (T2), 6 weeks (T3), 3 months (T4) and 6 months (T5) after appliance insertion. Levels of pain and discomfort decreased gradually by time in general. No significant changes in the levels of pain, tooth sensitivity and soft tissues tension were detected, whereas a significant decrease in the levels of pressure, impaired speech, impaired swallowing and lack of confidence in public was observed two weeks following appliance insertion. Mandibular constraint feeling required three months to decrease significantly. No difference was found between males and females with regard to acceptance. The RMR is well accepted by Class III patients in the early mixed dentition.

Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite

Directory of Open Access Journals (Sweden)

José Valladares Neto

2014-01-01

Full Text Available INTRODUCTION: This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. METHODS: The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extraction of mandibular first premolars. For maxillary retraction, the vertical dimension was temporarily increased to avoid obstacles to orthodontic movement. RESULTS: At the end of the treatment, ideal overjet and overbite were achieved. CONCLUSION: Examination eight years after orthodontic treatment revealed adequate clinical stability. This case report was submitted to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as part of the requirements to become a BBO diplomate.

[Orthodontic treatment of Class III patients with mandibular asymmetry].

Science.gov (United States)

Duan, Yin-Zhong; Huo, Na; Chen, Lei; Chen, Xue-Peng; Lin, Yang

2008-12-01

To investigate the treatment outcome of Class III patients with dental, functional and mild skeletal mandibular asymmetry. Thirty-five patients (14 males and 21 females) with dental, functional and mild skeletal mandibular asymmetry were selected. The age range of the patients was 7 - 22 years with a mean age of 16.5 years. Dental mandibular asymmetry was treated with expansion of maxillary arch to help the mandible returning to normal position. Functional mandibular asymmetry was treated with activator or asymmetrical protraction and Class III elastics. Mild skeletal mandibular asymmetry was treated with camouflage treatment. Good occlusal relationships were achieved and facial esthetics was greatly improved after orthodontic treatment in patients with dental and functional mandibular asymmetry. However, patients with skeletal mandibular asymmetry should be treated with both extraction and genioplasty. Orthodontic treatment was suitable for patients with dental and functional mandibular asymmetry, while combined orthodontics and surgery could get good results in patients with skeletal mandibular asymmetry.

Contemporary solutions for managing Class III malocclusion

Directory of Open Access Journals (Sweden)

Nathamuni Rengarajan Krishnaswamy

2015-01-01

Full Text Available Although patients with Class III malocclusions constitute a small percentage of the average orthodontic practice, providing them with optimal treatment is a daunting task. The treatment approach is dependent upon the growth status of the individual and the severity of the skeletal dysplasia. For growing individuals, facemask therapy to protract the maxilla is ineffective because of its dependence on dental anchorage to bring forth skeletal correction. Orthodontic camouflage in nongrowing mild skeletal Class III individuals is met with limited success because of the anatomical boundaries and the conventional biomechanics. Orthognathic surgery to correct the maxillomandibular relations is time-consuming, and the facial esthetics is compromised during the orthodontic decompensation period. Contemporary solutions to overcome these limitations are now viable with the use of temporary anchorage devices and by performing surgery prior to orthodontic decompensation. The rationale for employing these contemporary approaches will be discussed in this study with illustrative cases.

Non-surgical alternative in the treatment of skeletal Class III problems.

Science.gov (United States)

Jefferson, Y

1995-01-01

The dental profession is not static, but dynamic. New research findings, along with medical and technological advances, necessitate constant re-examination of treatment philosophies and techniques. What were acceptable treatment techniques in the past may not necessarily be the most effective and best techniques for our patients today. Currently, many practitioners feel that the only treatment for the correction of a skeletal Class III abnormality is via orthognathic surgery in older patients. In some cases it may be the only treatment option. But in most cases today, there are more conservative, non-surgical treatment alternatives in correcting Class III problems in younger aged children. In treating facial-skeletal problems, it must be emphasized that the human face is a biological masterpiece of form and function. Its importance has been documented in arts and sciences since the beginning of modern civilization. It is important enough so that individuals who are blessed with attractive features are afforded greater opportunities in our society. Attractive faces are associated with intelligence, honesty and good work ethics. With the advent of orthognathic surgery, functional appliance, functional regulator, and myofunctional therapy, the dental profession has the capability of leveling out the playing field for many individuals in our society. It does so by being able to correct problems closely associated with the human psyche--the human face. The ability to change facial features brings tremendous prestige to our profession. Along with this prestige comes greater responsibility. Our ability to change facial features entails greater understanding of facial balance and harmony. Ricketts states that the face must conform to stringent proportions known as the "divine proportion" in order for it to be esthetically pleasing. Also, our ability to move facial-skeletal structures entails greater understanding of the biomechanics of the human face. Without this

Gender differences in Class III malocclusion.

Science.gov (United States)

Baccetti, Tiziano; Reyes, Brian C; McNamara, James A

2005-07-01

This study evaluated gender differences in the cephalometric records of a large-scale cross-sectional sample of Caucasian subjects with Class III malocclusion at different developmental ages. The purpose also was to provide average age-related and sex-related data for craniofacial measures in untreated Class III subjects that are used as reference in the diagnostic appraisal of the patient with Class III disharmony. The sample examined consisted of 1094 pretreatment lateral cephalometric records (557 female subjects and 537 male subjects) of Caucasian Class III individuals. The age range for female subjects was between three years six months and 57 years seven months. The male subject group ranged from three years three months to 48 years five months. Twelve age groups were identified. Skeletal maturity at different age periods also was determined using the stage of cervical vertebral maturation. Gender differences for all cephalometric variables were analyzed using parametric statistics. The findings of the study indicated that Class III malocclusion is associated with a significant degree of sexual dimorphism in craniofacial parameters, especially from the age of 13 onward. Male subjects with Class III malocclusion present with significantly larger linear dimensions of the maxilla, mandible, and anterior facial heights when compared with female subjects during the circumpubertal and postpubertal periods.

IBO Case Report: Management of Skeletal Class III Malocclusion with Combined Rapid Maxillary Expansion: Facemask Therapy and 5-Year Follow-up

Directory of Open Access Journals (Sweden)

Ashok Surana

2012-01-01

Full Text Available This case report describes the management of skeletal Class III malocclusion with maxillary deficiency in an adolescent girl, using combined rapid maxillary expansion-facemask approach, followed by comprehensive fixed appliance mechanotherapy. Excellent long-term stability is demonstrated up to 5 years post-treatment.

Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

OpenAIRE

Seyed Mohammadreza Safavi; Farnaz Younessian; Sarvraj Kohli

2013-01-01

In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen ...

The effect of orthognathic surgery on the lip lines while smiling in skeletal class III patients with facial asymmetry.

Science.gov (United States)

Kang, Sang-Hoon; Kim, Moon-Key; An, Sang-In; Lee, Ji-Yeon

2016-12-01

The aim of this study was to examine the relationship between improvements in lip asymmetry at rest and while smiling after orthognathic surgery in patients with skeletal class III malocclusion. This study included 21 patients with skeletal class III malocclusion and facial asymmetry. We used preoperative and postoperative CT data and photographs to measure the vertical distance of the lips when smiling. The photographs were calibrated based on these distances and the CT image. We compared preoperative and postoperative results with the t test and correlations between measurements at rest and when smiling by regression analyses. There were significant correlations between the postoperative changes in canting of the mouth corners at rest, canting of the canines, canting of the first molars, the slope of the line connecting the canines, and the slope of the line connecting first molars. The magnitude of the postoperative lip line improvement while smiling was not significantly correlated with changes in the canting and slopes of the canines, molars, and lip lines at rest. It remains difficult to predict lip line changes while smiling compared with at rest after orthognathic surgery in patients with mandibular prognathism, accompanied by facial asymmetry.

Strategic camouflage treatment of skeletal Class III malocclusion (mandibular prognathism) using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy.

Science.gov (United States)

Seo, Yu-Jin; Lin, Lu; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2016-01-01

This case report presents the camouflage treatment that successfully improved the facial profile of a patient with a skeletal Class III malocclusion using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy. The patient was an 18-year-old woman with chief complaints of crooked teeth and a protruded jaw. Camouflage treatment was chosen because she rejected orthognathic surgery under general anesthesia. A hybrid type of bone-borne rapid maxillary expander with palatal mini-implants was used to correct the transverse discrepancy, and a mandibular anterior subapical osteotomy was conducted to achieve proper overjet with normal incisal inclination and to improve her lip and chin profile. As a result, a Class I occlusion with a favorable inclination of the anterior teeth and a good esthetic profile was achieved with no adverse effects. Therefore, the hybrid type of bone-borne rapid maxillary expander and a mandibular anterior subapical osteotomy can be considered effective camouflage treatment of a skeletal Class III malocclusion, providing improved inclination of the dentition and lip profile. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Comparison of changes in the transverse dental axis between patients with skeletal Class III malocclusion and facial asymmetry treated by orthognathic surgery with and without presurgical orthodontic treatment.

Science.gov (United States)

Song, Han-Sol; Choi, Sung-Hwan; Cha, Jung-Yul; Lee, Kee-Joon; Yu, Hyung-Seog

2017-07-01

To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, -1.8° ± 2.8°, p = 0.044; nondeviated side, -3.7° ± 3.3°, p = 0.001) and the lower canine inclined lingually on the nondeviated side (4.0° ± 5.4°, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.

Skeletal class III malocclusion treated using a non-surgical approach supplemented with mini-implants: a case report.

Science.gov (United States)

Farret, Marcel Marchiori; Benitez Farret, Milton M

2013-09-01

We describe a 28-year-old man who sought orthodontic treatment complaining about the esthetics of his smile and difficulties associated with masticatory function. The patient had a straight facial profile, skeletal and dental class III relationship, anterior open bite and posterior crossbite. He refused orthognathic surgery and was therefore treated with camouflage orthodontics supplemented with the placement of one mini-implant in each side of the mandible to facilitate movement of the lower dentition distally, tooth-by-tooth. At the end of treatment, a class I molar relationship was obtained, with an ideal overjet and overbite and excellent intercuspation. Furthermore, the open bite and crossbite were corrected. Analysis 2 years after treatment revealed good stability of treatment outcome.

Changes in anteroposterior position and inclination of the maxillary incisors after surgical-orthodontic treatment of skeletal class III malocclusions.

Science.gov (United States)

Zou, Bingshuang; Zhou, Yang; Lowe, Alan A; Li, Huiqi; Pliska, Benjamin

2015-12-01

The purpose of this study was to evaluate and compare the anteroposterior (AP) position and inclination of the maxillary incisors in subjects with class I normal occlusion and a harmonious profile with patients with skeletal class III malocclusions, and to investigate the changes in maxillary incisor inclination and AP position after surgical-orthodontic treatment in class III patients. Sixty-five subjects (35 female and 30 male; mean age: 21.8 ± 3.89 years) with normal profiles and class I skeletal and dental patterns were selected as a control sample. Sixty-seven patients (38 female and 29 male; mean age: 21.3 ± 3.31 years) with skeletal and dental class III malocclusions who sought surgical-orthodontic treatment were used as the study sample. Subjects were asked to smile and profile photographs were taken with the head in a natural position and the maxillary central incisors and the forehead in full view; cephalograms were taken and superimposed on the profile pictures according to the outline of the forehead and nose. Forehead inclination, maxillary incisor facial inclination and the AP position of the maxillary central incisor relative to the forehead (FAFFA) were measured on the integrated images and statistical analyses were performed. In both groups, there were no significant male/female differences in either the maxillary central incisor inclination or AP position. Female subjects had a significantly steeper forehead inclination compared with males (P 0.05). In the control group, 84.6% had the facial axial point (FA) of their maxillary central incisors positioned between lines through the forehead facial axis (FFA) point and the glabella. In the study group, however, 79.1% had the maxillary central incisors positioned posterior to the line through the FFA point and the difference with the control group was statistically significant (P 0.05). With the integrated radiograph-photograph method, the lateral cephalogram was reoriented, which makes it possible

Management of skeletal Class III malocclusion with unilateral crossbite on a growing patient using facemask-bonded rapid palatal expander and fixed appliances

Directory of Open Access Journals (Sweden)

Tinnie Effendy

2015-01-01

Full Text Available Facemask (FM and bonded rapid palatal expander (RPE are part of growth modification treatments for correcting skeletal Class III pattern with retrognathic maxilla. This orthopaedic treatment is usually preceded by fixed appliances to achieve aesthetic dental alignment and improve interdigitation. This case report reviews treatment of Class III malocclusion with unilateral crossbite in a 12-year-old boy using FM and bonded RPE, followed by fixed appliances. Choice of FM and bonded RPE was in line with indication which was mild Class III malocclusion with retrognathic maxilla. Execution of treatment was made considering treatment biomechanics and patient cooperation. This orthopaedic treatment was followed by orthodontic treatment specifically aimed to correct unilateral crossbite, canine relationship yet to reach Class I, lower midline shift, as well as unintended dental consequences of using bonded RPE, namely posterior open bite and deepening curve of spee. Posttreatment facial profile and smile are more esthetic. Occlusion is significantly improved both functionally and aesthetically.

[Evaluation of the correction of the skeletal class III malocclusion by distalization of the whole mandible dentition with micro-implant anchorage].

Science.gov (United States)

2017-06-18

To evaluate the clinical effect of distalizing mandibular dentition with micro-implant in patients with skeletal class III malocclusion. In the study, 20 patients with skeletal class IIImalocclusion were selected. They are consist of 8 males and 12 female with an age range from 16 to 38 years old and an average age of (21.5±5.6) years.They were treated with straight wire technique and the implant were inserted into the mandibular external oblique line to distlize the lower dentition to a class I molar relationships. Cephalometrics films were taken before and after treatment. The changes of hard tissue and soft tissue were analyzed by evaluating 26 measurement measurements. Class I molar relationships were achieved, and the profile were improved after treatment. ANB increased by (0.80±1.02) °,Wits increased by (1.67±1.74) mm,after treatment (Plower dentition were significantly retracted after treatment with L1-NB distance decreased by(2.64±1.50) mm, Plower first molars were retracted by (3.26±1.95) mm and (0.79±1.27) mm respectively (Plower second molars were retracted by (3.06±1.80) mm (Plower lip to esthetic plane were decreased by (1.70±1.59) mm on average (Pclass III malocclusion, the lower teeth were retracted by controlled tipping movement.

Diagnosis and conservative treatment of skeletal Class III malocclusion with anterior crossbite and asymmetric maxillary crowding.

Science.gov (United States)

Tseng, Linda L Y; Chang, Chris H; Roberts, W Eugene

2016-04-01

A man, aged 28 years 9 months, came for an orthodontic consultation for a skeletal Class III malocclusion (ANB angle, -3°) with a modest asymmetric Class II and Class III molar relationship, complicated by an anterior crossbite, a deepbite, and 12 mm of asymmetric maxillary crowding. Despite the severity of the malocclusion (Discrepancy Index, 37), the patient desired noninvasive camouflage treatment. The 3-Ring diagnosis showed that treatment without extractions or orthognathic surgery was a viable approach. Arch length analysis indicated that differential interproximal enamel reduction could resolve the crowding and midline discrepancy, but a miniscrew in the infrazygomatic crest was needed to retract the right buccal segment. The patient accepted the complex, staged treatment plan with the understanding that it would require about 3.5 years. Fixed appliance treatment with passive self-ligating brackets, early light short elastics, bite turbos, interproximal enamel reduction, and infrazygomatic crest retraction opened the vertical dimension of the occlusion, improved the ANB angle by 2°, and achieved excellent alignment, as evidenced by a Cast Radiograph Evaluation score of 28 and a Pink and White dental esthetic score of 3. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Correlation of Shape and Size of Sella Turcica With the Type of Facial Skeletal Class in an Iranian Group

International Nuclear Information System (INIS)

Valizadeh, Solmaz; Shahbeig, Shahrzad; Mohseni, Sudeh; Azimi, Fateme; Bakhshandeh, Hooman

2015-01-01

In orthodontic science, diagnosis of facial skeletal type (class I, II, and III) is essential to make the correct treatment plan that is usually expensive and complicated. Sometimes results from analysis of lateral cephalometry radiographies are not enough to discriminate facial skeletal types. In this situation, knowledge about the relationship between the shape and size of the sella turcica and the type of facial skeletal class can help to make a more definitive decision for treatment plan. The present study was designed to investigate this relationship in patients referred to a dental school in Iran. In this descriptive-analytical study, cephalometric radiographies of 90 candidates for orthodontic treatment (44 females and 46 males) with an age range of 14 - 26 years and equal distribution in terms of class I, class II, and class III facial skeletal classification were selected. The shape, length, diameter, and depth of the sella turcica were determined on the radiographs. Linear dimensions were assessed by one-way analysis of variance while the correlation between the dimensions and age was investigated using Pearson’s correlation coefficient. Sella turcica had normal morphology in 24.4% of the patients while irregularity (notching) in the posterior part of the dorsum sella was observed in 15.6%, double contour of sellar floor in 5.6%, sella turcica bridge in 23.3%, oblique anterior wall in 20% and pyramidal shape of the dorsum sella in 11.1% of the subjects. In total, 46.7% of class I patients had a normal shape of sella turcica, 23.3% of class II patients had an oblique anterior wall and a pyramidal shape of the dorsum sella, and 43.3% of class III individuals had sella turcica bridge (the greatest values). Sella turcica length was significantly greater in class III patients compared to class II and class I (P < 0.0001). However, depth and diameter of sella turcica were similar in class I, class II, and class III patients. Furthermore, age was significantly

Occlusal plane change after intrusion of maxillary posterior teeth by microimplants to avoid maxillary surgery with skeletal Class III orthognathic surgery.

Science.gov (United States)

Park, Hyo-Sang; Kim, Ji-Yeun; Kwon, Tae-Geon

2010-11-01

To increase stability and mandibular setback movement, surgical maxillary impaction is normally performed with mandibular setback surgery in treating adult skeletal Class III patients. This article demonstrates the use of microimplants for anchorage to intrude molars and the resultant rotation of the maxillary occlusal plane clockwise to increase the surgical mandibular setback and reduce the posterior vertical dimension instead of maxillary surgical impaction. A 21-year-old man with mandibular prognathism was treated with mandibular setback surgery that included orthodontic treatment for decompensation. Microimplants placed into the palatal alveolar bone between the maxillary first and second molars were used to intrude the maxillary posterior teeth and change the occlusal plane clockwise. This produced 4 mm more of distal movement of the chin during mandibular setback surgery compared with the surgical prediction with no change in the occlusal plane. These results were similar to those of 2-jaw surgery with maxillary posterior impaction. The intrusion of the maxillary posterior teeth with microimplants might prevent the need for maxillary surgery in adult skeletal Class III patients. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Novel three dimensional position analysis of the mandibular foramen in patients with skeletal class III mandibular prognathism

International Nuclear Information System (INIS)

Kang, Sang Hoon; Kim, Yeon Ho; Won, Yu Jin; Kim, Moon Key

2016-01-01

To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the Mn F. The horizontal and vertical positions were examined by regression analysis. Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination (R2): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism

Novel three dimensional position analysis of the mandibular foramen in patients with skeletal class III mandibular prognathism

Energy Technology Data Exchange (ETDEWEB)

Kang, Sang Hoon; Kim, Yeon Ho; Won, Yu Jin; Kim, Moon Key [Dept. of Oral and Maxillofacial Surgery, National Health Insurance Service Ilsan Hospital, Goyang (Korea, Republic of)

2016-06-15

To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the Mn F. The horizontal and vertical positions were examined by regression analysis. Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination (R2): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.

A study of Class III treatment: orthodontic camouflage vs orthognathic surgery.

Science.gov (United States)

Georgalis, Katherine; Woods, Michael G

2015-11-01

To evaluate the differences in pretreatment and post-treatment characteristics of Class III patients treated with orthodontic camouflage or orthognathic surgery, and to compare the range of skeletal, dental and soft tissue changes that are likely to occur with treatment, with particular reference to the influence of extractions on the resultant incisor angulations. Pretreatment and post-treatment cephalograms of 31 Class III orthodontically-camouflaged patients and 36 Class III surgical patients (without genioplasty) were obtained from one specialist practice. From the surgical group, 26 pre-surgical lateral cephalograms were also obtained. Inclusion criteria for the two groups were at least three of the following: (1) an ANB angle of 1 degree or less, (2) a Wits appraisal less than -4 mm, (3) an incisal overjet ≤ 0 mm, and (14) a Class III molar relationship. All lateral cephalograms were traced and digitised and a number of skeletal, dental and soft tissue variables were measured. The camouflage and surgical groups were also divided into premolar extraction and non-extraction subgroups to allow for a specific analysis of extraction effects. Before treatment, the surgical group demonstrated, on average, a more severe skeletal discrepancy and increased dental compensations, compared with the orthodontically camouflaged group. After treatment, the mean SNA angle was greater, the ANB angle was more positive, the Wits appraisal was closer to ideal and the lower incisors were less retroclined in the surgery group. There was a small mean reduction in horizontal chin projection in the surgery group compared with a small increase in the camouflage group. The mentolabial fold and the lower lip curve were deeper, on average, and the lips less retrusive after surgery. There was a mean increase in upper incisor proclination during treatment in both the surgical and camouflage groups with a greater increase in the camouflage group. There was a significant reduction in upper

Orthodontic decompensation in skeletal Class III malocclusion: redefining the amount of movement assessed by Cone-Beam Computed Tomography

Directory of Open Access Journals (Sweden)

José Antonio Zuega Cappellozza

2015-10-01

Full Text Available Introduction:Cone-Beam Computed Tomography (CBCT is essential for tridimensional planning of orthognathic surgery, as it allows visualization and evaluation of bone structures and mineralized tissues. Tomographic slices allow evaluation of tooth inclination and individualization of movement performed during preoperative decompensation. The aim of this paper was to assess maxillary and mandibular incisors inclination pre and post orthodontic decompensation in skeletal Class III malocclusion.Methods:The study was conducted on six individuals with skeletal Class III malocclusion, surgically treated, who had Cone-Beam Computed Tomographic scans obtained before and after orthodontic decompensation. On multiplanar reconstruction view, tomographic slices (axial, coronal and sagittal were obtained on the long axis of each incisor. The sagittal slice was used for measurement taking, whereas the references used to assess tooth inclination were the long axis of maxillary teeth in relation to the palatal plane and the long axis of mandibular teeth in relation to the mandibular plane.Results:There was significant variation in the inclination of incisors before and after orthodontic decompensation. This change was of greater magnitude in the mandibular arch, evidencing that natural compensation is more effective in this arch, thereby requiring more intensive decompensation.Conclusion:When routinely performed, the protocols of decompensation treatment in surgical individuals often result in intensive movements, which should be reevaluated, since the extent of movement predisposes to reduction in bone attachment levels and root length.

Combined Orthodontic-surgical Treatment for Skeletal Class III Malocclusion with Multiple Impacted Permanent and Supernumerary Teeth: Case Report.

Science.gov (United States)

Xue, Dai Juan And Feng

2014-01-01

In this report we describe a combined orthodontic and surgical treatment for a 14-year-old boy with severe skeletal class III deformity and dental problem. His upper posterior primary teeth in the left side were over-retained and 6 maxillary teeth (bilateral central incisors and canines, left first and second premolars) were impacted, together with 5 supernumerary teeth in both arches. The treatment protocol involved extraction of all the supernumerary and deciduous teeth, surgical exposure and orthodontic traction of the impacted teeth, a bimaxillary orthognathic approach including Lefort I osteotomy. Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty was performed to correct skeletal problem. After treatment, all of the impacted teeth were brought to proper alignment in the maxillary arch. A satisfied profile and good posterior occlusion was achieved. Treatment mechanics and consideration during different stages are discussed.

Perubahan Posisi Mandibula pada Perawatan Kamuflase Maloklusi Kelas III Skeletal

Directory of Open Access Journals (Sweden)

Sri Hartati

2013-12-01

Full Text Available Maloklusi kelas III skeletal pada umumnya memiliki hubungan rahang yang prognatik, yaitu mandibula terletak lebih maju dari maksila. Perawatan kamuflase non pembedahan pada pasien dewasa dengan maloklusi kelas III memerlukan pencabutan dua gigi premolar mandibula atau empat gigi premolar untuk memberikan ruang retraksi  gigi incisivus mandibula. Prinsip perawatan teknik Begg adalah mekanisme gaya differensial dengan menggunakan gaya yang ringan dan kontinyu. Penggunaan   elastik intermaksiler kelas III menyebabkan ekstrusi gigi molar atas, retrusi gigi insisivus bawah, rotasi mandibula searah jarum jam dan perubahan posisi kondilus. Penelitian ini bertujuan untuk mengetahui perubahan linier dan anguler posisi mandibula pada perawatan kamuflase  maloklusi kelas III skeletal setelah dilakukan perawatan ortodontik dengan teknik Begg. Penelitian dilakukan pada 20 pasang sefalogram lateral dari subjek laki-laki dan perempuan usia 18-25 tahun yang memenuhi kriteria penelitian. Seluruh subjek yang dirawat dengan teknik Begg disertai pencabutan dua gigi premolar pertama bawah. Perubahan posisi mandibula ditentukan  dengan perubahan   titik Pg dan Pg. terhadap sumbu X dan sumbu Y sedangkan perubahan anguler dengan melihat perubahan sudut Y-axis. Data yang diperoleh dianalisisi dengan paired t test. Hasil penelitian perubahan posisi mandibula setelah perawatan ortodontik kamuflase  dengan alat cekat teknik Begg menunjukkan perubahan  yang bermakna (p<0,05.  Titik  Pg mengalami pergeseran ke arah posterior  dan inferior dan sudut Y-axis  mengalami peningkatan berarti terjadi rotasi searah jarum jam. Skeletal Class III malocclusion generally has prognatic jaw relationship. The mandibular is more forward than the maxilla. Camouflage non-surgical treatment in adult patients with Class III malocclusion required extraction of two mandibular premolars or four premolar teeth to give a space of mandibular incisors teeth retraction. The Begg technique

Dentofacial effects of bone-anchored maxillary protraction: a controlled study of consecutively treated Class III patients.

Science.gov (United States)

De Clerck, Hugo; Cevidanes, Lucia; Baccetti, Tiziano

2010-11-01

In this cephalometric investigation, we analyzed the treatment effects of bone-anchored maxillary protraction (BAMP) with miniplates in the maxilla and mandible connected by Class III elastics in patients with Class III malocclusion. The treated sample consisted of 21 Class III patients consecutively treated with the BAMP protocol before the pubertal growth spurt (mean age, 11.10 ± 1.8 years) and reevaluated after BAMP therapy, about 1 year later. The treated group was compared with a matched control group of 18 untreated Class III subjects. Significant differences between the treated and control groups were assessed with independent-sample t tests (P <0.05). Sagittal measurements of the maxilla showed highly significant improvements during active treatment (about 4 mm more than the untreated controls), with significant protraction effects at orbitale and pterygomaxillare. Significant improvements of overjet and molar relationship were recorded, as well as in the mandibular skeletal measures at Point B and pogonion. Vertical skeletal changes and modifications in incisor inclination were negligible, except for a significant proclination of the mandibular incisors in the treated group. Significant soft-tissue changes reflected the underlying skeletal modifications. Compared with growth of the untreated Class III subjects, the BAMP protocol induced an average increment on skeletal and soft-tissue advancement of maxillary structures of about 4 mm, and favorable mandibular changes exceeded 2 mm. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Ethnicity and skeletal Class III morphology: a pubertal growth analysis using thin-plate spline analysis.

Science.gov (United States)

Alkhamrah, B; Terada, K; Yamaki, M; Ali, I M; Hanada, K

2001-01-01

A longitudinal retrospective study using thin-plate spline analysis was used to investigate skeletal Class III etiology in Japanese female adolescents. Headfilms of 40 subjects were chosen from the archives of the Orthodontic department at Niigata University Dental Hospital, and were traced at IIIB and IVA Hellman dental ages. Twenty-eight homologous landmarks, representing hard and soft tissue, were digitized. These were used to reproduce a consensus for the profilogram, craniomaxillary complex, mandible, and soft tissue for each age and skeletal group. Generalized least-square analysis revealed a significant shape difference between age-matched groups (P spline and partial warps (PW)3 and 2 showed a maxillary retrusion at stage IIIB opposite an acute cranial base at stage IVA. Mandibular total spline and PW4, 5 showed changes affecting most landmarks and their spatial interrelationship, especially a stretch along the articulare-pogonion axis. In soft tissue analysis, PW8 showed large and local changes which paralleled the underlying hard tissue components. Allometry of the mandible and anisotropy of the cranial base, the maxilla, and the mandible asserted the complexity of craniofacial growth and the difficulty of predicting its outcome.

Comparison of second molar eruption patterns in patients with skeletal Class II and skeletal Class I malocclusions.

Science.gov (United States)

Brin, Ilana; Camasuvi, Semin; Dali, Nasser; Aizenbud, Dror

2006-12-01

The eruptive positions of the second molars in Class I and Class II malocclusions were studied. Pretreatment records of 221 patients with a mean age of 11.3 years were evaluated. About 19% of them had skeletal Class I, 31% had skeletal maxillary Class II, and 50% had skeletal mandibular Class II malocclusions. The mean values of the dental and chronologic ages of the subjects were similar. The eruptive positions in relation to a reference line, the developmental stages of the patients' second molars and dental ages were recorded from the panoramic roentgenograms. The distribution of the various developmental stages in each malocclusion group was similar, and no association between skeletal malocclusion and dental developmental stage of the second molars was encountered. The eruptive position of the maxillary second molars was more occlusal only in the oldest maxillary Class II group, above 12 years of age (P = .02). These results support, in part, previous reports suggesting that the maxillary second molars may erupt earlier in patients with skeletal maxillary Class II malocclusions.

Facial and occlusal esthetic improvements of an adult skeletal Class III malocclusion using surgical, orthodontic, and implant treatment

Science.gov (United States)

de Almeida Cardoso, Mauricio; de Avila, Erica Dorigatti; Guedes, Fabio Pinto; Battilani Filho, Valter Antonio Ban; Capelozza Filho, Leopoldino; Correa, Marcio Aurelio; Nary Filho, Hugo

2016-01-01

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects. PMID:26877982

Cone-Beam Computed Tomography Assessment of Lower Facial Asymmetry in Unilateral Cleft Lip and Palate and Non-Cleft Patients with Class III Skeletal Relationship.

Science.gov (United States)

Lin, Yifan; Chen, Gui; Fu, Zhen; Ma, Lian; Li, Weiran

2015-01-01

To evaluate, using cone-beam computed tomography (CBCT), both the condylar-fossa relationships and the mandibular and condylar asymmetries between unilateral cleft lip and palate (UCLP) patients and non-cleft patients with class III skeletal relationship, and to investigate the factors of asymmetry contributing to chin deviation. The UCLP and non-cleft groups consisted of 30 and 40 subjects, respectively, in mixed dentition with class III skeletal relationships. Condylar-fossa relationships and the dimensional and positional asymmetries of the condyles and mandibles were examined using CBCT. Intra-group differences were compared between two sides in both groups using a paired t-test. Furthermore, correlations between each measurement and chin deviation were assessed. It was observed that 90% of UCLP and 67.5% of non-cleft subjects had both condyles centered, and no significant asymmetry was found. The axial angle and the condylar center distances to the midsagittal plane were significantly greater on the cleft side than on the non-cleft side (P=0.001 and P=0.028, respectively) and were positively correlated with chin deviation in the UCLP group. Except for a larger gonial angle on the cleft side, the two groups presented with consistent asymmetries showing shorter mandibular bodies and total mandibular lengths on the cleft (deviated) side. The average chin deviation was 1.63 mm to the cleft side, and the average absolute chin deviation was significantly greater in the UCLP group than in the non-cleft group (P=0.037). Compared with non-cleft subjects with similar class III skeletal relationships, the subjects with UCLP showed more severe lower facial asymmetry. The subjects with UCLP presented with more asymmetrical positions and rotations of the condyles on axial slices, which were positively correlated with chin deviation.

Early class III occlusal tendency in children and its selective management

Directory of Open Access Journals (Sweden)

Kapur A

2008-09-01

Full Text Available Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e., true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the skeletal bases and may result in severe facial deformities. The treatment should be carried out as early as possible with the aim of permitting normal growth. This paper deals with the selection of an appropriate treatment approach from the various current options available for early intervention in children developing class III occlusal tendencies; the different clinical features are depicted in the three case reports.

Conservative treatment of Angle Class III malocclusion with anterior crossbite

Directory of Open Access Journals (Sweden)

João Hélder Ferreira de Aguiar

2015-08-01

Full Text Available Angle Class III malocclusion is characterized by anteroposterior dental discrepancy which might be associated or not with skeletal changes. Class III molar relationship is associated with vertical or lingually tipped mandibular incisors and a usually concave profile. These characteristics seriously affect facial esthetics and most frequently are the reason why patients seek orthodontic treatment. This case was presented to the committee of the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as part of the requisites to become a BBO Diplomate.

Skeletal stability of surgery-first bimaxillary orthognathic surgery for skeletal class III malocclusion, using standardized criteria.

Science.gov (United States)

Park, K-H; Sandor, G K; Kim, Y-D

2016-01-01

The purpose of this study was to compare the postoperative stability following bimaxillary surgery performed either with or without preoperative orthodontic treatment, in class III malocclusion patients. These patients were enrolled using standardized inclusion criteria. Forty patients with a class III malocclusion were included in this retrospective study. Inclusion criteria were class III malocclusion with and without premolar extraction, stability. With respect to postsurgical changes, significant differences were observed in the changes for the vertical reference plane to the posterior nasal spine, horizontal reference plane to B-point, and occlusal plane angle in both groups. No statistically significant differences in the relapse rates were observed between the two groups. No significant differences were observed between the two groups in terms of the postoperative stability. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Progressive changes in patients with skeletal Class III malocclusion treated by 2-jaw surgery with minimal and conventional presurgical orthodontics: A comparative study.

Science.gov (United States)

Zhou, Yang; Li, Zili; Wang, Xiaoxia; Zou, Bingshuang; Zhou, Yanheng

2016-02-01

In this study, we aimed to compare treatment efficacy and postsurgical stability between minimal presurgical orthodontics and conventional presurgical orthodontics for patients with skeletal Class III malocclusion. Forty patients received minimal presurgical orthodontics (n = 20) or conventional presurgical orthodontics (n = 20). Lateral cephalograms were obtained before treatment, before orthognathic surgery, and at 1 week, 3 months, 6 months, and 12 months after surgery. Changes of overjet and mandibular incisal angle before surgery were greater in the conventional presurgical orthodontics group than in the minimal presurgical orthodontics group. Postsurgical horizontal changes in Points A and B, overjet, and mandibular incisal angle showed significant differences among the time points. Most of the horizontal and vertical relapses in the maxilla and the mandible occurred within the first 6 months in both groups. Minimal presurgical orthodontics and conventional presurgical orthodontics showed similar extents and directions of skeletal changes in patients with Class III malocclusion. However, orthodontists and surgeons should preoperatively consider the postsurgical counterclockwise rotation of the mandible when using minimal presurgical orthodontics. Close and frequent observations are recommended in the early postsurgical stages. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Correction of a severe Class III malocclusion.

Science.gov (United States)

Arslan, Seher Gündüz; Kama, Jalan Devecioglu; Baran, Sedat

2004-08-01

The success of early orthopedic treatment in patients with Class III anomalies depends on facial skeletal development and type of treatment. This case report describes the treatment of a 12.6-year-old girl who had a severe Class III malocclusion with a 6-mm anterior crossbite, a deep overbite, a narrow maxilla, and unerupted maxillary canines. The treatment plan included rapid palatal expansion to expand the maxilla, reverse headgear to correct the maxillary retrognathia, a removable anterior inclined bite plane to correct the anterior crossbite and the deep overbite, and fixed edgewise appliances to align the teeth. One canine was brought into alignment, but the other was placed in occlusion in its transposed position. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing.

Oral Rehabilitation With Orthognathic Surgery After Dental Implant Placement for Class III Malocclusion With Skeletal Asymmetry and Posterior Bite Collapse.

Science.gov (United States)

Ohba, Seigo; Nakatani, Yuya; Kawasaki, Takako; Tajima, Nobutaka; Tobita, Takayoshi; Yoshida, Noriaki; Sawase, Takashi; Asahina, Izumi

2015-08-01

Increasing numbers of older patients are seeking orthognathic surgery to treat jaw deformity. However, orthodontic and orthognathic surgical treatment is difficult in cases without occlusal vertical stop. A 55-year-old man presented with Class III malocclusion and mandibular protrusion including esthetic problems and posterior bite collapse. He underwent dental implant treatment to reconstruct an occlusal vertical stop before orthognathic surgery. His occlusal function and esthetic problems improved after surgery, and his skeletal and occlusal stability has been maintained for 6 years. Dental implant placement at appropriate positions could help to determine the position of the proximal segment at orthognathic surgery and could shorten the time required to restore esthetic and occlusal function. This case demonstrates how skeletal and dental stability can be maintained long after surgery in a patient with jaw deformity and posterior bite collapse.

Vertical control in the Class III compensatory treatment.

Science.gov (United States)

Sobral, Márcio Costa; Habib, Fernando A L; Nascimento, Ana Carla de Souza

2013-01-01

Compensatory orthodontic treatment, or simply orthodontic camouflage, consists in an important alternative to orthognathic surgery in the resolution of skeletal discrepancies in adult patients. It is important to point that, to be successfully performed, diagnosis must be detailed, to evaluate, specifically, dental and facial features, as well as the limitations imposed by the magnitude of the discrepancy. The main complaint, patient's treatment expectation, periodontal limits, facial pattern and vertical control are some of the items to be explored in the determination of the viability of a compensatory treatment. Hyperdivergent patients who present with a Class III skeletal discrepancy, associated with a vertical facial pattern, with the presence or tendency to anterior open bite, deserve special attention. In these cases, an efficient strategy of vertical control must be planned and executed. The present article aims at illustrating the evolution of efficient alternatives of vertical control in hiperdivergent patients, from the use, in the recent past, of extraoral appliances on the lower dental arch (J-hook), until nowadays, with the advent of skeletal anchorage. But for patients with a more balanced facial pattern, the conventional mechanics with Class III intermaxillary elastics, associated to an accentuated curve of Spee in the upper arch and a reverse curve of Spee in the lower arch, and vertical elastics in the anterior region, continues to be an excellent alternative, if there is extreme collaboration in using the elastics.

Vertical control in the Class III compensatory treatment

Directory of Open Access Journals (Sweden)

Márcio Costa Sobral

2013-04-01

Full Text Available INTRODUCTION: Compensatory orthodontic treatment, or simply orthodontic camouflage, consists in an important alternative to orthognathic surgery in the resolution of skeletal discrepancies in adult patients. It is important to point that, to be successfully performed, diagnosis must be detailed, to evaluate, specifically, dental and facial features, as well as the limitations imposed by the magnitude of the discrepancy. The main complaint, patient's treatment expectation, periodontal limits, facial pattern and vertical control are some of the items to be explored in the determination of the viability of a compensatory treatment. Hyperdivergent patients who carry a Class III skeletal discrepancy, associated with a vertical facial pattern, with the presence or tendency to anterior open bite, deserve special attention. In these cases, an efficient strategy of vertical control must be planned and executed. OBJECTIVE: The present article aims at illustrating the evolution of efficient alternatives of vertical control in hiperdivergent patients, from the use, in the recent past, of extra-oral appliances on the lower dental arch (J-hook, until nowadays, with the advent of skeletal anchorage. But for patients with a more balanced facial pattern, the conventional mechanics with Class III intermaxillary elastics, associated to an accentuated curve of Spee in the upper arch and a reverse Curve of Spee in the lower arch, and vertical elastics in the anterior region, continues to be an excellent alternative, if there is extreme collaboration in using the elastics.

Effect of Class III bone anchor treatment on airway.

Science.gov (United States)

Nguyen, Tung; De Clerck, Hugo; Wilson, Michael; Golden, Brent

2015-07-01

To compare airway volumes and minimum cross-section area changes of Class III patients treated with bone-anchored maxillary protraction (BAMP) versus untreated Class III controls. Twenty-eight consecutive skeletal Class III patients between the ages of 10 and 14 years (mean age, 11.9 years) were treated using Class III intermaxillary elastics and bilateral miniplates (two in the infra-zygomatic crests of the maxilla and two in the anterior mandible). The subjects had cone beam computed tomographs (CBCTs) taken before initial loading (T1) and 1 year out (T2). Twenty-eight untreated Class III patients (mean age, 12.4 years) had CBCTs taken and cephalograms generated. The airway volumes and minimum cross-sectional area measurements were performed using Dolphin Imaging 11.7 3D software. The superior border of the airway was defined by a plane that passes through the posterior nasal spine and basion, while the inferior border included the base of the epiglottis to the lower border of C3. From T1 to T2, airway volume from BAMP-treated subjects showed a statistically significant increase (1499.64 mm(3)). The area in the most constricted section of the airway (choke point) increased slightly (15.44 mm(2)). The airway volume of BAMP patients at T2 was 14136.61 mm(3), compared with 14432.98 mm(3) in untreated Class III subjects. Intraexaminer correlation coefficients values and 95% confidence interval values were all greater than .90, showing a high degree of reliability of the measurements. BAMP treatment did not hinder the development of the oropharynx.

Maxillary canine-first premolar bilateral transposition in a Class III patient: A case report.

Science.gov (United States)

Potrubacz, Maciej Iancu; Tepedino, Michele; Chimenti, Claudio

2016-05-01

Tooth transposition is a rare dental anomaly that often represents a challenge for the clinician. The case of a girl with skeletal Class III malocclusion and concomitant maxillary canine-first premolar bilateral transposition, followed from 7 to 17 years of age, is presented. After a first phase of treatment aimed at resolving the Class III malocclusion, the transposition was maintained and the case finalized with a multibracket appliance.

Má oclusão Classe III de Angle com discrepância ântero-posterior acentuada Angle Class III malocclusion with severe anteroposterior disharmony

Directory of Open Access Journals (Sweden)

Marcos Alan Vieira Bittencourt

2009-02-01

Full Text Available A má oclusão Classe III de Angle é caracterizada por uma discrepância dentária ântero-posterior, que pode ou não estar acompanhada por alterações esqueléticas. Em geral, o aspecto facial fica bastante comprometido, sendo justamente esse fator, na maioria das vezes, que motiva o paciente a procurar pelo tratamento. Este caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 4, ou seja, uma má oclusão com discrepância ântero-posterior acentuada, Classe III, com ANB menor ou igual a -2º, como parte dos requisitos para a obtenção do título de Diplomado pelo BBO.Angle Class III malocclusion is characterized by an anteroposterior dental discrepancy which may or may not be accompanied by skeletal changes. In general, distressed by a significantly compromised facial aspect, patients tend to seek treatment. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO, as representative of Category 4, i.e., a malocclusion with severe anteroposterior discrepancy, Class III, and ANB Angle equal to or smaller than -2º, as part of the requirements for obtaining the BBO Diploma.

Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult

Directory of Open Access Journals (Sweden)

Zaki Hakami

2018-01-01

Full Text Available This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult.

Science.gov (United States)

Hakami, Zaki; Chen, Po Jung; Ahmida, Ahmad; Janakiraman, Nandakumar; Uribe, Flavio

2018-01-01

This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

Comparative study of postoperative stability between conventional orthognathic surgery and a surgery-first orthognathic approach after bilateral sagittal split ramus osteotomy for skeletal class III correction.

Science.gov (United States)

Mah, Deuk-Hyun; Kim, Su-Gwan; Oh, Ji-Su; You, Jae-Seek; Jung, Seo-Yun; Kim, Won-Gi; Yu, Kyung-Hwan

2017-02-01

The purpose of this study is to compare the postoperative stability of conventional orthognathic surgery to a surgery-first orthognathic approach after bilateral sagittal split ramus osteotomy (BSSRO). The study included 20 patients who underwent BSSRO for skeletal class III conventional orthognathic surgery and 20 patients who underwent a surgery-first orthognathic approach. Serial lateral cephalograms were analyzed to identify skeletal changes before surgery (T0), immediately after surgery (T1), and after surgery (T2, after 1 year or at debonding). The amount of relapse of the mandible in the conventional orthognathic surgery group from T1 to T2 was 2.23±0.92 mm ( P surgery-first orthognathic approach group from T1 to T2 was 3.49±1.71 mm ( P surgery-first orthognathic approach. Therefore, careful planning and skeletal stability should be considered in orthognathic surgery.

Perawatan Maloklusi Pseudo Kelas III dengan Alat Ortodontik Cekat Teknik Begg

Directory of Open Access Journals (Sweden)

Robertus Meidiyanto

2016-10-01

Full Text Available Latar Belakang: Maloklusi Pseudo kelas III ditandai dengan hubungan yang tidak harmonis antara relasi anteroposterior rahang dan posisi mandibula terhadap maksila. Ketidakharmonisan tersebut dapat disebabkan karena mandibula yang normal dengan maksila retrusif. Maloklusi pseudo kelas III mempunyai perhitungan yang menunjukkan bentuk antara klas I dan skeletal klas III. Perbedaanya hanya pada sudut gonial dimana pada skeletal klas III sudutnya lebih tumpul, sedangkan pada sampel pseudo klas III, sudut gonial lebih mirip dengan klas I. Perawatan ortodontik dengan alat cekat teknik Begg dapat juga untuk merawat maloklusi Angle kelas III, termasuk maloklusi skeletal yang menyertainya. Tujuan: memaparkan perubahan dental dan skeletal setelah perawatan dengan alat cekat teknik Begg. Kasus: perempuan 20 tahun mengeluhkan gigi-gigi rahang atas ada yang tumbuh di belakang dan rahang bawah nyakil sehingga menganggu penampilan dan mengurangi rasa percaya diri. Diagnosis: Maloklusi Angle Klas III subdivisi serta hubungan skeletal klas III dengan maksila retrusif dan mandibula protusif disertai Crossbite: 12, 11, 21, 22 terhadap 34, 32,31, 41, 42, 43. Perawatan: menggunakan alat cekat teknik Begg tanpa pencabutan. Kesimpulan: Hasil menunjukkan crowded terkoreksi, overjet dan overbite terkoreksi, relasi molar menjadi klas I.   Background: Pseudo class III malocclusion characterized by disharmony between anteroposterior relationship of jaw and mandibulae position toward maxilla. This disharmony cause by normally shaped mandibles and underveloped maxillae. Pseudo clas III malocclusion is an intermediate form between class I and skeletal clas III malocclusion. The only exception was the gonial angle, which was generally more obtuse in the skeletal class III sample. Measurement of gonial angle in the pseudo class III sample was found to be rather similar to class I sample. Fixed Begg orthodontic appliance can be used to treat Angle’s class III malocclusion

Treatment and posttreatment effects of mandibular cervical headgear followed by fixed appliances in Class III malocclusion.

Science.gov (United States)

Rey, Diego; Angel, David; Oberti, Giovanni; Baccetti, Tiziano

2008-03-01

In this cephalometric investigation, we compared the treatment and posttreatment effects on patients undergoing an initial phase of mandibular cervical headgear (MCH) therapy followed later by comprehensive edgewise therapy with untreated Class III controls. The treated sample consisted of 21 patients treated consecutively with MCH before the pubertal growth spurt (average age, 10 years 2 months at the beginning of treatment). At the final observation period (average age, 15 years 3 months), all patients were in decelerative growth phases as determined by the cervical vertebral maturation method. Active treatment and posttreatment effects were evaluated in the treated group with nonparametric statistical analysis for paired samples. The treated sample was compared with a nonparametric statistical test for independent samples with 20 untreated Class III subjects who were matched for malocclusion, sex, and stage of cervical vertebral maturation to the treatment group. MCH therapy followed by fixed appliances was shown to be an effective treatment for the correction of skeletal Class III malocclusion at postpubertal observation. The favorable skeletal effects consisted mainly of smaller increases in mandibular length and advancement with respect to the controls, with the final outcome of significant improvements in the sagittal skeletal (+4 mm for the Wits appraisal) and dental (+2.7 mm for overjet, -4.4 mm for molar relationship) parameters. This treatment protocol also induced significant downward rotation of the mandible (2.8 degrees ).

[Study on the difference of corresponding age at cervical vertebral maturation stages among different skeletal malocclusions].

Science.gov (United States)

Zuo, Changyan; Cong, Chao; Wang, Shihui; Gu, Yan

2015-10-01

To compare the difference of corresponding age at cervical vertebral maturation (CVM) stages among different skeletal malocclusions and provide clinic guideline on optimal treatment timing for skeletal malocclusion. Based on ANB angle, 2 575 cephalograms collected from Department of Orthodontics, Peking University School and Hospital of Stomatology from May, 2006 to November, 2014 were classified into skeletal Class I (ANB 0°~5°, 1 317 subjects), Class II (ANB > 5°, 685 subjects) and Class III (ANB < 0°, 573 subjects) groups. CVM stages were evaluated with the modified version of CVM method. Independent sample t test was performed to analyze the difference of age at different CVM stages among various skeletal groups. Significant gender difference of age was found at CS3 to CS6 for skeletal Class I group (P < 0.05), at CS5 and CS6 for skeletal Class II group (P < 0.05), and at CS3 and CS5 for skeletal Class III group (P < 0.05). At CS3 stage, the average age of male in skeletal Class II and skeletal Class III groups was (11.6 ± 1.5) years old and (10.3 ± 1.9) years old, respectively; the average age of females in those two groups was (11.7 ± 1.3) years old and (9.3 ± 1.5) years old, respectively, and significant difference was found in both comparisons (P < 0.05). Compared average age at CS5 and CS6 between skeletal Class II and skeletal Class III groups [the ages of male was (15.1 ± 1.7) and (16.8 ± 1.6) years old, the ages of male was (14.6 ± 1.2) and (15.7 ± 2.5) years old], significant difference was also found (P < 0.05). Significant gender differences were found when evaluated CVM stage and age in skeletal Class I, II and III groups. Significant differences of age at different CVM stage was noted when skeletal Class II was compared with skeletal Class III groups.

Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

Science.gov (United States)

Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

2015-12-01

In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3

Semilongitudinal cephalometric study of craniofacial growth in untreated Class III malocclusion.

Science.gov (United States)

Alexander, Ann E Zionic; McNamara, James A; Franchi, Lorenzo; Baccetti, Tiziano

2009-06-01

Class III growth in white subjects is poorly characterized because of the low prevalence of the disharmony and the clinical tendency to treat this condition early. The purpose of this study was to investigate craniofacial growth changes by using longitudinal cephalometric records of white subjects with untreated Class III malocclusions to provide comparison data for studies of Class III treatment outcomes. Longitudinal records of 103 subjects were analyzed. Annual incremental growth changes in craniofacial variables from early childhood to late adolescence were examined for each sex. Inferential statistics were applied to changes in mandibular length, midfacial length, and lower anterior facial height of each sex (Wilcoxon tests) and between sexes (Mann-Whitney U tests). In the girls, the adolescent spurt in mandibular growth occurred between the ages of 10 and 12 years. In the boys, the adolescent mandibular growth spurt was between 12 and 15 years. Statistically significant growth changes in the average increments of growth of these linear measurements occurred in both sexes between 12 and 15 years. Adolescent peaks in midfacial growth were at prepubertal ages in both sexes. During childhood (5-7 years), much craniofacial growth occurred. Moreover, there was considerable mandibular growth relative to the maxilla in Class III subjects after the adolescent growth spurt. White Class III subjects showed definite worsening of the relative mandibular prognathism and sagittal skeletal discrepancy between the jaws with growth. The growth pattern of 3 fundamental cephalometric measurements (lower anterior face height, midfacial length, and mandibular length) exhibited differences between Class III male and female subjects in both the timing and the size of average growth increments in the adolescent growth spurt.

Correction of a Class III malocclusion with over 20 mm of space to close in the maxilla by using miniscrews for extra anchorage.

NARCIS (Netherlands)

Breuning, K.H.

2008-01-01

Unilateral closure of maxillary extraction spaces in patients with Class III malocclusion can be challenging. This case report describes the closure of first premolar and first molar extraction spaces in a patient with a Class III dental relationship. Two miniscrews were used for intraoral skeletal

Comparison of incisor inclination in patients with Class III malocclusion treated with orthognathic surgery or orthodontic camouflage.

Science.gov (United States)

Troy, Beth A; Shanker, Shiva; Fields, Henry W; Vig, Katherine; Johnston, William

2009-02-01

Reports comparing Class III patients treated by camouflage and those treated by orthognathic surgery are not numerous. The purpose of this study was to compare the dental and skeletal values of Class III patients treated with these methods against normative data and over the course of treatment. Thirty-three surgical and 39 camouflage Class III patients were selected from a graduate orthodontic clinic and regional private practices, and lateral cephalograms were digitized. Skeletal and dental values were obtained, and mean and efficacy evaluations referenced to ethnic norms were calculated. At pretreatment, the surgery patients had more severe skeletal discrepancies and more compensated incisors. During presurgical orthodontic treatment, most of the surgery group's mandibular incisors were significantly decompensated, although half of the maxillary incisors remained compensated. The surgical move improved 90% of these patients but to only 60% to 65% of the norm. The camouflage group was compensated at pretreatment, and they became more compensated in the end. After treatment, there were no differences between the incisor positions of the 2 groups. There was no statistical difference in incisor inclination and position between the Class III surgical and camouflage groups after treatment; there was a significant difference in the pretreatment and posttreatment incisor inclination and position compared with normative values for both the surgical and the camouflage groups; the maxillary and mandibular incisors were not adequately decompensated in the surgical group, but significant improvement in mandibular incisor position and axial inclination was achieved presurgically. The outcome of the surgical correction was limited by the inadequate presurgical orthodontic incisor decompensation, and orthodontic compensation of incisors occurred postsurgically to achieve an optimal occlusal result.

Hyoid bone position and head posture comparison in skeletal Class I and Class II subjects: A retrospective cephalometric study

Directory of Open Access Journals (Sweden)

Pawankumar Dnyandeo Tekale

2014-01-01

Full Text Available Objective: The aim of the study was to investigate the hyoid bone position and the head posture using lateral cephalograms in subjects with skeletal Class I and skeletal Class II pattern and to investigate the gender differences. Materials and Methods: The study used lateral cephalograms of 40 subjects (20 skeletal Class I pattern; 20 skeletal Class II pattern. Lateral cephalograms were traced and analyzed for evaluation of the hyoid bone position and the head posture using 34 parameters. Independent sample t-test was performed to compare the differences between the two groups and between genders in each group. Statistical tests were performed using NCSS 2007 software (NCSST, Kaysville, Utah, USA. Results: The linear measurements between the hyoid bone (H and cervical spine (CV2ia, the nasion-sella line, palatal line nasion line, the anterior nasal spine (ANS to perpendicular projection of H on the NLP (NLP- Nasal Linear Projection (H-NLP/ANS as well as the posterior cranial points (Bo, Ar and S points were found to be less in skeletal Class II subjects. The measurement H-CV2ia was found to be less in males with skeletal Class I pattern and H-CV4ia was found to be less in males with skeletal Class II pattern. The natural head posture showed no significant gender differences. Conclusion: The position of hyoid bone was closer to the cervical vertebra horizontally in skeletal Class II subjects when compared with skeletal Class I subjects. In males, the hyoid bone position was closer to the cervical vertebra horizontally both in skeletal Class I and skeletal Class II subjects.

Pharyngeal airway dimensions in skeletal class II: A cephalometric growth study

International Nuclear Information System (INIS)

Uslu-Akcam, Ozge

2017-01-01

This retrospective study aimed to evaluate the nasopharyngeal and oropharyngeal dimensions of individuals with skeletal class II, division 1 and division 2 patterns during the pre-peak, peak, and post-peak growth periods for comparison with a skeletal class I control group. Totally 124 lateral cephalograms (47 for skeletal class I; 45 for skeletal class II, division 1; and 32 for skeletal class II, division 2) in pre-peak, peak, and post-peak growth periods were selected from the department archives. Thirteen landmarks, 4 angular and 4 linear measurements, and 4 proportional calculations were obtained. The ANOVA and Duncan test were applied to compare the differences among the study groups during the growth periods. Statistically significant differences were found between the skeletal class II, division 2 group and other groups for the gonion-gnathion/sella-nasion angle. The sella-nasion-B-point angle was different among the groups, while the A-point-nasion-B-point angle was significantly different for all 3 groups. The nasopharyngeal airway space showed a statistically significant difference among the groups throughout the growth periods. The interaction among the growth periods and study groups was statistically significant regarding the upper oropharyngeal airway space measurement. The lower oropharyngeal airway space measurement showed a statistically significant difference among the groups, with the smallest dimension observed in the skeletal class II, division 2 group. The naso-oropharyngeal airway dimensions showed a statistically significant difference among the class II, division 1; class II, division 2; and class I groups during different growth periods

Pharyngeal airway dimensions in skeletal class II: A cephalometric growth study

Energy Technology Data Exchange (ETDEWEB)

Uslu-Akcam, Ozge [Clinic of Orthodontics, Ministry of Health, Tepebasi Oral and Dental Health Hospital, Ankara (Turkmenistan)

2017-03-15

This retrospective study aimed to evaluate the nasopharyngeal and oropharyngeal dimensions of individuals with skeletal class II, division 1 and division 2 patterns during the pre-peak, peak, and post-peak growth periods for comparison with a skeletal class I control group. Totally 124 lateral cephalograms (47 for skeletal class I; 45 for skeletal class II, division 1; and 32 for skeletal class II, division 2) in pre-peak, peak, and post-peak growth periods were selected from the department archives. Thirteen landmarks, 4 angular and 4 linear measurements, and 4 proportional calculations were obtained. The ANOVA and Duncan test were applied to compare the differences among the study groups during the growth periods. Statistically significant differences were found between the skeletal class II, division 2 group and other groups for the gonion-gnathion/sella-nasion angle. The sella-nasion-B-point angle was different among the groups, while the A-point-nasion-B-point angle was significantly different for all 3 groups. The nasopharyngeal airway space showed a statistically significant difference among the groups throughout the growth periods. The interaction among the growth periods and study groups was statistically significant regarding the upper oropharyngeal airway space measurement. The lower oropharyngeal airway space measurement showed a statistically significant difference among the groups, with the smallest dimension observed in the skeletal class II, division 2 group. The naso-oropharyngeal airway dimensions showed a statistically significant difference among the class II, division 1; class II, division 2; and class I groups during different growth periods.

Treatment and post-treatment effects of facemask therapy on the sagittal pharyngeal dimensions in Class III subjects.

Science.gov (United States)

Baccetti, Tiziano; Franchi, Lorenzo; Mucedero, Manuela; Cozza, Paola

2010-06-01

The purpose of this cephalometric study was to analyse the treatment and post-treatment craniofacial effects of a facemask (FM) combined with a bite block (BB) with specific regard to the sagittal pharyngeal dimensions in subjects with a Class III malocclusion when compared with an untreated Class III control group. The FM/BB group (22 subjects, 12 females and 10 males) had a mean age pre-treatment (T1) of 8.9 +/- 1.5 years, at the end of active treatment (T2) of 10.5 +/- 1.3 years, and post-treatment (T3) of 12.6 +/- 1.9 years. The treated group was compared with a control group of 14 subjects (6 females and 8 males) with untreated Class III malocclusions that matched the FM/BB group as to age at T1, T2, and T3, observation periods and skeletal maturation. Comparisons of the T2-T1 and T3-T1 changes between the two groups were analysed with the Mann-Whitney test. Significant favourable skeletal changes in the maxilla and mandible were observed in the treated group both after Ts2 and T3. No significant short- or long-term changes in the sagittal oropharyngeal and nasopharyngeal airway dimensions were induced by maxillary protraction in subjects with a Class III malocclusion when compared with untreated controls.

Dentoskeletal Overjet Measurements of Iraqi Adult Sample with Different Skeletal Jaw Relationship

Directory of Open Access Journals (Sweden)

Shahbaa A Mohammed

2017-11-01

Full Text Available Background: Many attempts were done to develop a method that actually reflects the sagittal jaw discrepancies without depending on cranial landmarks or dental occlusion. This study aimed to use one of these methods (dentoskeletal overjet for assessing the sagittal jaw relationships of Iraqi adult sample with different skeletal jaw relationship. Materials and method: The sample consisted of 90 digital true lateral cephalometric radiographs of Iraqi individuals with no previous orthodontic treatment. Cephalometric analysis of skeletal sagittal jaw relationship -ANB angle, beta angle and Wits appraisal- will perform for everyone to divide the sample into three groups (skeletal class I, II, III for which the dentoskeletal overjet will be measured. All cephalometric measurements will be done using AutoCAD. Results: Descriptive statistics of all variables with different skeletal jaw relationship showed that mean values of dentoskeletal overjet were (1.15, 3.91 and –2.01 mm for skeletal class I, class II and class III jaw relationship respectively. Accurate reproducibility of dentoskeletal overjet in assessment of jaw skeletal relationship showed that the lowest value was for assessment of skeletal class III jaw relationship (73% and the value for assessment of both skeletal class I and class II was higher (93%. Conclusions: Dentoskeletal overjet could be utilized in accurate representation of skeletal jaw relationship.

Compensatory canine angulation in angle Class II and III patients

Directory of Open Access Journals (Sweden)

Mauro Carlos Agner Busato

2009-09-01

Full Text Available The aim of this study was to evaluate the occurence of compensation in mesiodistal axial inclinations of canines in skeletal malocclusions patients. The sample consisted of 25 Angle Class II, division 1 malocclusion (group 1 and 19 Angle Class III malocclusion patients (group 2. After measurement of dental angulations through a method that associates plaster model photography and AutoCad software, comparisons between the groups were performed by T-test for independent samples. Results showed that there was no statistically significant difference (p < 0.05 between groups, when maxillary canine angulations were compared. Regarding the mandibular canines, there was a statistically significant difference in dental angulation, expressed by 3.2° for group 1 and 0.15° for group 2. An upright position tendency for mandibular canines was observed in the Angle Class III sample. This configures a pattern of compensatory coronary positioning, since the angulation of these teeth makes them occupy less space in the dental arch and consequently mandibular incisors can be in a more retracted position in the sagittal plane.

Dental compensation for moderate Class III with vertical growth pattern by extraction of the lower second molars.

Science.gov (United States)

Jacobs, Collin; Jacobs-Müller, Claudia; Hoffmann, Viviana; Meila, Dan; Erbe, Christina; Krieger, Elena; Wehrbein, Heiner

2012-01-01

Analysis of the effects and side effects of treatment of patients with moderate skeletal Class III and vertical growth pattern by means of extraction of the second molars in the lower jaw. A total of 20 patients with a mean age of 12.9 years were examined retrospectively. Inclusion criteria consisted of a Wits value of 0 to -5, a posterior growth pattern of the mandible (Hasund analysis), an overjet of -2 to 1 mm, and an overbite of 0 to -3 mm. Treatment was performed using a straight-wire appliance. As part of the treatment, the lower second molars were extracted and Class III elastics attached. Cephalograms and orthopantomograms taken before and after treatment were used for evaluation. Treatment resulted in a significant change in the mean overjet from 0.5 mm to 2.1 mm and the attainment of a positive mean overbite of -1.0 mm to 0.9 mm. The occlusal plane rotated anteriorly from 18.8° to 13.7°. The skeletal parameters showed a change in the Wits value from -3.3 mm to -1.4 mm and an anterior mandibular rotation (ML-NSL 35.5° vs. 32.0°). The soft tissues revealed an increase in the distance between the lower lip and the "esthetic line" to the posterior (-2.0 mm vs. -3.9 mm). Dental compensation of moderate skeletal Class III with a tendency to an anterior open bite with vertical growth pattern by extracting the lower second molars, combined with Class III elastics, resulted in an anterior rotation of the occlusal plane and mandible. Eighteen of 20 patients achieved a physiological overjet and positive overbite. A prerequisite for this therapy is the presence of lower wisdom teeth; a potential side effect is elongation of the upper second molars.

Early orthodontic treatment for Class III malocclusion: A systematic review and meta-analysis.

Science.gov (United States)

Woon, See Choong; Thiruvenkatachari, Badri

2017-01-01

Class III malocclusion affects between 5% and 15% of our population. The 2 most common dilemmas surrounding Class III treatment are the timing of treatment and the type of appliance. A number of appliances have been used to correct a Class III skeletal discrepancy, but there is little evidence available on their effectiveness in the long term. Similarly, early treatment of Class III malocclusion has been practiced with increasing interest. However, there has been no solid evidence on the benefits in the long term. The aim of this systematic review was to evaluate the effectiveness of orthodontic/orthopedic methods used in the early treatment of Class III malocclusion in the short and long terms. Several sources were used to identify all relevant studies independently of language. The Cochrane Central Register of Controlled Trials, Cochrane Database of Systematic Reviews, Embase (Ovid), and MEDLINE (Ovid) were searched to June 2016. The selection criteria included randomized controlled trials (RCTs) and prospective controlled clinical trials (CCTs) of children between the ages of 7 and 12 years on early treatment with any type of orthodontic/orthopedic appliance compared with another appliance to correct Class III malocclusion or with an untreated control group. The primary outcome measure was correction of reverse overjet, and the secondary outcomes included skeletal changes, soft tissue changes, quality of life, patient compliance, adverse effect, Peer Assessment Rating score, and treatment time. The search results were screened for inclusion, and the data extracted by 2 independent authors. The data were analyzed using software (version 5.1, Review Manager; The Nordic Cochrane Centre, The Cochrane Collaboration; Copenhagen, Denmark). The mean differences with 95% confidence intervals were expressed for the continuous data. Random effects were carried out with high levels of clinical or statistical heterogeneity and fixed affects when the heterogeneity was low

The relationship between facial skeletal class and expert-rated interpersonal skill: an epidemiological survey on young Italian adults

Directory of Open Access Journals (Sweden)

Tremolizzo Lucio

2006-10-01

Full Text Available Abstract Background The facial region plays a major role in determining physical attractiveness, so we assessed the hypothesis that the capability of successfully managing interpersonal relationships in young adults might be related to the facial skeletal class. Methods 1,014 young subjects applying to the Military Academy of Pozzuoli, Italy, were enrolled and the cephalometric evaluation was performed by calculating the angular relationships between skeletal points localized by the lateral cephalogram of the face, sorting the subjects in three groups corresponding to each major facial skeletal class. Concurrently, the subjects were evaluated by a team of psychiatrists administering the MMPI-2 test followed by a brief colloquium with each candidate, in order to identify those subjects characterized by low skills for managing interpersonal relationships. Results According to the psychiatric evaluation about 20% of the subjects were considered potentially unable to manage successfully interpersonal relationships (NS. Males displayed an about two-fold increased risk of being NS. No differences were shown in the distribution of the NS male subjects among the three different facial skeletal classes. On the other hand, NS females displayed a different distribution among the three facial skeletal classes, with a trend of about two-fold and four-fold, respectively, for those subjects belonging to classes II and III, respect to those belonging to class I. Conclusion Females may be more sensitive to physical factors determining beauty, such as the facial morphology certainly is. This finding appears to be interesting especially when thinking about possible orthodontic interventions, although further study is certainly needed to confirm these results.

The relationship between facial skeletal class and expert-rated interpersonal skill: an epidemiological survey on young Italian adults.

Science.gov (United States)

Senna, Andrea; Abbenante, Domenico; Tremolizzo, Lucio; Campus, Guglielmo; Strohmenger, Laura

2006-10-10

The facial region plays a major role in determining physical attractiveness, so we assessed the hypothesis that the capability of successfully managing interpersonal relationships in young adults might be related to the facial skeletal class. 1,014 young subjects applying to the Military Academy of Pozzuoli, Italy, were enrolled and the cephalometric evaluation was performed by calculating the angular relationships between skeletal points localized by the lateral cephalogram of the face, sorting the subjects in three groups corresponding to each major facial skeletal class. Concurrently, the subjects were evaluated by a team of psychiatrists administering the MMPI-2 test followed by a brief colloquium with each candidate, in order to identify those subjects characterized by low skills for managing interpersonal relationships. According to the psychiatric evaluation about 20% of the subjects were considered potentially unable to manage successfully interpersonal relationships (NS). Males displayed an about two-fold increased risk of being NS. No differences were shown in the distribution of the NS male subjects among the three different facial skeletal classes. On the other hand, NS females displayed a different distribution among the three facial skeletal classes, with a trend of about two-fold and four-fold, respectively, for those subjects belonging to classes II and III, respect to those belonging to class I. Females may be more sensitive to physical factors determining beauty, such as the facial morphology certainly is. This finding appears to be interesting especially when thinking about possible orthodontic interventions, although further study is certainly needed to confirm these results.

Juvenile idiopathic arthritis (JIA): a screening study to measure class II skeletal pattern, TMJ PDS and use of systemic corticosteroids.

LENUS (Irish Health Repository)

Mandall, Nicky A

2010-03-01

To screen patients with oligoarticular and polyarticular forms of Juvenile Idiopathic Arthritis (JIA) to determine (i) the severity of their class II skeletal pattern; (ii) temporomandibular joint signs and symptoms and (iii) use of systemic corticosteroids.

Treatment of an adult with a normodivergent, mild skeletal Class III pattern, and a Bolton′s discrepancy using a single mandibular incisor extraction plan

Directory of Open Access Journals (Sweden)

Sunjay Suri

2015-01-01

Full Text Available A 34½-year-old pathologist with active social and professional interaction sought orthodontic solutions for severe esthetic and functional impairment. She felt due to spaced and protruding maxillary incisors, but had not got treatment previously as she did not want to wear metallic appliances. The diagnosis revealed a skeletal Class III normodivergent pattern with relative mandibular excess tooth material. Treatment with multibracket fixed appliances using ceramic brackets, extraction of a mandibular central incisor, maxillary incisor crown recontouring with interproximal reduction, and using gentle space closure mechanics ameliorated the problems and provided an esthetically pleasing, functionally adequate occlusion with good intercuspation.

Aesthetic and functional outcomes using a multiloop edgewise archwire for camouflage orthodontic treatment of a severe Class III open bite malocclusion.

Science.gov (United States)

Marañón-Vásquez, Guido Artemio; Soldevilla Galarza, Luciano Carlos; Tolentino Solis, Freddy Antonio; Wilson, Cliff; Romano, Fábio Lourenço

2017-09-01

Occasionally, orthodontists will be challenged to treat malocclusions and skeletal disharmonies, which by their complexity one might think that the only treatment alternative is the surgical-orthodontic approach. A male patient, aged 17 years old, was diagnosed with a skeletal Class III malocclusion, anterior open bite and negative overjet. An unpleasant profile was the patient's 'chief complaint' showing interest in facial aesthetics improvement. Nevertheless, the patient and his parents strongly preferred a non-surgical treatment approach. He was treated with a multiloop edgewise archwire to facilitate uprighting and distal en-masse movement of lower teeth, correct the Class III open bite malocclusion, change the inclination of the occlusal plane and obtain the consequent morphological-functional adaptation of the mandible. The Class III malocclusion was corrected and satisfactory changes in the patient's profile were obtained. Active treatment was completed in 2 years, and facial result remained stable at 2 years 6 months after debonding.

Class III camouflage using skeletal anchorage and Pendex appliance.

Science.gov (United States)

Miguel, José Augusto M; Zanardi, Gustavo

2011-01-01

This case report describes the orthodontic treatment for a young female, aged 18 years 4 months, with a Class III malocclusion on the right side, with a combination of a posterior and anterior crossbite. Two rigid orthodontic mini-implants were placed in the retromolar region in order to move the entire lower arch distally with nickel-titanium coil springs. In addition, a Pendex appliance was used to create space and to improve the arch form and the transverse relationship. The active treatment period was 17 months. Normal overjet and overbite were obtained, and facial balance was improved. Although the cephalometric superimposition has demonstrated the effects of dental compensation, the final dental and facial results were satisfactory and stable after the second year in retention. Copyright © 2011 Società Italiana di Ortodonzia SIDO. Published by Elsevier Srl. All rights reserved.

Three-Dimensional Evaluation of the Upper Airway Morphological Changes in Growing Patients with Skeletal Class III Malocclusion Treated by Protraction Headgear and Rapid Palatal Expansion: A Comparative Research.

Directory of Open Access Journals (Sweden)

Xueling Chen

Full Text Available The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT.Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30 was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1 and post-treatment (T2 of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated.Comparing with the data from T1 group, the subspinale (A of maxilla and the upper incisor (UI of the T2 group were moved in the anterior direction. The gnathion (Gn of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group.The PE treatment of Class III malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx.

A pilot clinical study of Class III surgical patients facilitated by improved accelerated osteogenic orthodontic treatments.

Science.gov (United States)

Wu, JiaQi; Jiang, Jiu-Hui; Xu, Li; Liang, Cheng; Bai, YunYang; Zou, Wei

2015-07-01

To evaluate if the improved accelerated osteogenic orthodontics (IAOO) procedure could speed Class III surgical patients' preoperative orthodontic treatment duration and, if yes, to what extent. This study was also designed to determine whether or not an IAOO procedure affects the tooth-moving pattern during extraction space closure. The samples in this study consisted of 24 Class III surgical patients. Twelve skeletal Class III surgery patients served as an experimental group (group 1) and the others as a control group (group 2). Before treatment, the maxillary first premolars were removed. For group 1, after the maxillary dental arch was aligned and leveled (T2), IAOO procedures were performed in the maxillary alveolar bone. Except for this IAOO procedure in group 1, all 24 patients experienced similar combined orthodontic and orthognathic treatment. Study casts of the maxillary dentitions were made before orthodontic treatment (T1) and after extraction space closure (T3). All of the casts were laser scanned, and the amount of movement of the maxillary central incisor, canine, and first molar, as well as arch widths, were digitally measured and analyzed by using the three-dimensional model superimposition method. The time durations T3-T2 were significantly reduced in group 1 by 8.65 ± 2.67 months and for T3-T1 were reduced by 6.39 ± 2.00 months (P teeth movement in the sagittal, vertical, and transverse dimensions between the two groups (P > .05). The IAOO can reduce the surgical orthodontic treatment time for the skeletal Class III surgical patient by more than half a year on average. The IAOO procedures do not save anchorage.

Long-term outcomes of Class III treatment with mandibular cervical headgear followed by fixed appliances.

Science.gov (United States)

Baccetti, Tiziano; Rey, Diego; Oberti, Giovanni; Stahl, Franka; McNamara, James A

2009-09-01

To evaluate the stability of the outcomes of mandibular cervical headgear (MCH) and fixed appliance-treated Class III patients at a long-term posttreatment (5 years) observation, compared with well-matched untreated Class III controls, following a previous report on the short-term outcomes of this protocol. The treated group consisted of 20 patients with dentoskeletal Class III malocclusions treated with a two-phase protocol consisting of MCH and fixed appliances, while the control group comprised 18 untreated subjects with similar dentoskeletal Class III malocclusion. Lateral cephalograms of both patients and controls were analyzed at two time points: posttreatment (PT), after two-phase treatment; and long term (LT). All patients were at a postpubertal stage of skeletal maturity at PT, and they showed CS6 at LT, thus revealing completion of pubertal craniofacial growth. In the long term, the treatment group showed significantly smaller values for mandibular length (Co-Gn), SNB angle, maxillomandibular differential, and molar relation. When compared with the controls, the treated patients exhibited also greater values for ANB angle, Wits appraisal, and overjet at LT. No significant difference between the two groups was found for the changes occurring from PT to LT. Favorable dentoskeletal outcomes induced by MCH and fixed appliances remained stable in the long term; untreated Class III malocclusion did not show any tendency toward self-improvement during the postpubertal interval.

A new modified tandem appliance for management of developing Class III malocclusion

Directory of Open Access Journals (Sweden)

Ram Sukh

2013-01-01

Full Text Available Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

A new modified tandem appliance for management of developing Class III malocclusion.

Science.gov (United States)

Sukh, Ram; Singh, Gyan P; Tandon, Pradeep

2013-10-01

Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

Maxillary Transverse Comparison of Skeletal Class I and Class III Patient Populations Using Cone Beam Computed Tomography

Science.gov (United States)

2012-04-13

dental compensations 5. Have fully erupted canines (no...expansion. Compendium 1996;17:170-178. 2. Basaran G, Hamamci N, Hamamci O. Comparison of Dental Arch Widths in Different Types of Malocclusions . World... Dental and Alveolar Arch Widths in Normal Occlusion and Class III Malocclusion . Angle Orthod 2005; 75:809- 813.   36. Vanarsdall, Transverse dimension and long-term stability, Semin Orthod 1999;5:171–180.

[Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment].

Science.gov (United States)

Wu, Jia-qi; Xu, Li; Liang, Cheng; Zou, Wei; Bai, Yun-yang; Jiang, Jiu-hui

2013-10-01

To evaluate the treatment time and the anterior and posterior teeth movement pattern as closing extraction space for the Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment. There were 10 skeletal Class III patients in accelerated osteogenic orthodontic group (AOO) and 10 patients in control group. Upper first premolars were extracted in all patients. After leveling and alignment (T2), corticotomy was performed in the area of maxillary anterior teeth to accelerate space closing.Study models of upper dentition were taken before orthodontic treatment (T1) and after space closing (T3). All the casts were laser scanned, and the distances of the movement of incisors and molars were digitally measured. The distances of tooth movement in two groups were recorded and analyzed. The alignment time between two groups was not statistically significant. The treatment time in AOO group from T2 to T3 was less than that in the control group (less than 9.1 ± 4.1 months). The treatment time in AOO group from T1 to T3 was less than that in the control group (less than 6.3 ± 4.8 months), and the differences were significant (P 0.05). Accelerated osteogenic orthodontic treatment could accelerate space closing in Class III surgical patients and shorten preoperative orthodontic time. There were no influence on the movement pattern of anterior and posterior teeth during pre-surgical orthodontic treatment.

25 CFR 502.4 - Class III gaming.

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Class III gaming. 502.4 Section 502.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR GENERAL PROVISIONS DEFINITIONS OF THIS CHAPTER § 502.4 Class III gaming. Class III gaming means all forms of gaming that are not class I gaming or class...

Early Intervention in Skeletal Class II and dental Class II division I malocclusion

Directory of Open Access Journals (Sweden)

Zeeshan Iqbal Bhat

2013-01-01

Full Text Available A Class II malocclusion may occur as a result of mandibular deficiency, maxillary excess, or a combination of both. However, the most common finding is mandibular skeletal retrusion. The use of functional jaw orthopedics, at the right time during growth, can ultimately result in malocclusion patients achieving an excellent functional occlusion, a broad beautiful smile, a full face with a beautiful jaw line, and profile. Functional jaw orthopedic (FJO appliances are designed to encourage adaptive skeletal growth by maintaining the mandible in a corrected forward position. The activator developed by Andresen is one of the most widely used for this purpose. A 12-year-old boy with skeletal Class II malocclusion and dental Class II div I malocclusion, a low mandibular plane angle was treated with growth modulation using an activator followed by molar distalization using fixed orthodontics for detailing of the occlusion. The major effects of the activator treatment in this case have been due to increase in condylar growth and also an increase in mandibular base length. Further, non-extraction fixed orthodontic treatment for proper interdigitation of the dentition also helped to maintain the stability of the satisfactory results achieved.

An evaluation on time status of functional orthopedic treatment in class II skeletal patients with cervical vertebrae maturation stage (CVMS index

Directory of Open Access Journals (Sweden)

Dalili Z.

2004-08-01

Full Text Available Statement of Problem: Considerable response to functional orthopedic appliances treatment in class II skeletal patients occurs during pubertal growth spurt. Therefore, it seems necessary to investigate indices indicating mandibular growth pattern. It has been proved that analyzing cervical vertebral maturation stage is a more valid index than that of hand wrist. Purpose: The aim of this study was to evaluate the time status of functional orthopedic treatment in class II skeletal patients using CVMS index. Materials and Methods: In this descriptive-inferential study, lateral cephalometric radiographs of 153 class II skeletal patients with mandibular deficiency, before treatment, were studied by an oral and maxillofacial radiologist using the index of cervical vertebral maturation stage (CVMS and were categorized in three phases: CVMS I (desirable phase of treatment, CVMS II (ideal phase, and CVMS III (undesirable phase of treatment. Results: Statistical analysis ranked the prevalence of treatment phases as: 41.8% in desirable phase (CVMS I, 28.1% in ideal phase (CVMA II and 30% in undesirable phase (CVMS III. No significant differences were found between the three phases using Chi-square analysis. Time status of functional orthopedic treatment was also evaluated based on age and sex. The results showed significant differences between two sexes (P=0.032. Conclusion: The present study suggests the analysis of CVMS index, along with clinical criteria, in the determination of an ideal time for functional orthopedic treatment to prevent patients’ exhaustion during treatment Period.

Class III malocclusion with severe anteroposterior discrepancy

Directory of Open Access Journals (Sweden)

Susana Maria Deon Rizzatto

2012-10-01

Full Text Available This study aims at reporting the clinical case of a patient with Class III skeletal malocclusion with severe maxillary deficiency, producing a reduced midface associated with severe mandibular prognathism. The pre-surgical orthodontic preparation was composed mainly by dentoalveolar expansion and repositioning of the incisors in the lower arch. Then, a combined maxillary and mandibular orthognathic surgery was performed. The treatment objectives were achieved, with significant improvement in facial esthetics and occlusion, followed by post-treatment stability. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO, as part of the requirements for obtaining the title of Diplomate by BBO.O objetivo deste artigo é relatar o caso clínico de um paciente portador de má oclusão de Classe III esquelética com acentuada deficiência maxilar, causando redução do terço médio da face, associada a severo prognatismo mandibular. O preparo ortodôntico pré-cirúrgico foi composto, principalmente, pela expansão dentoalveolar da maxila e o reposicionamento dos incisivos na arcada inferior. Depois, foi realizada a cirurgia ortognática combinada maxilomandibular. Os objetivos do tratamento foram atingidos, com significativa melhora da oclusão e da estética facial, seguida de estabilidade pós-tratamento. Esse caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, como parte dos requisitos para obtenção do título de Diplomado pelo BBO.

Stability of skeletal changes induced by growth modulation procedures in the treatment of skeletal Class II malocclusion

Directory of Open Access Journals (Sweden)

Prashantha Govinakovi Shivamurthy

2016-01-01

Full Text Available Objective: Objective of this study, based on an evaluation of lateral cephalograms, was to evaluate the degree of skeletal changes produced by the various growth modulative procedures in the treatment of skeletal Class II malocclusion and to characterize the stability of these changes in the years after treatment. Materials and Methods: Total of 40 patients with Class II malocclusion was divided into three groups according to appliance used, i.e. removable or fixed functional appliances (n = 10, combination of functional appliance with headgear (n = 10, and only headgear (n = 10. In addition, almost a matched control group (n = 10 also characterized by skeletal Class II pattern and were under observation, for more than 2 years was also selected. Lateral cephalograms of each patient were taken at the start of treatment (T1, at its completion (T2, and long-term posttreatment (T3. Results: This study showed significant improvement in maxillomandibular relationship in treated group compared to control group, and the changes remained stable in posttreatment phase. Restriction of maxillary growth was evident in headgear and combination groups whereas significant forward movement of the mandible was seen in functional group. Conclusion: Analysis of lateral cephalograms indicates that growth modulation therapy in angle Class II malocclusion brings about desired skeletal changes which remain relatively stable over a long-term period.

Soft tissue thin-plate spline analysis of pre-pubertal Korean and European-Americans with untreated Angle's Class III malocclusions.

Science.gov (United States)

Singh, G D; McNamara, J A; Lozanoff, S

1999-01-01

The purpose of this study was to assess soft tissue facial matrices in subjects of diverse ethnic origins with underlying dentoskeletal malocclusions. Pre-treatment lateral cephalographs of 71 Korean and 70 European-American children aged between 5 and 11 years with Angle's Class III malocclusions were traced, and 12 homologous, soft tissue landmarks digitized. Comparing mean Korean and European-American Class III soft tissue profiles, Procrustes analysis established statistical difference (P thin-plate spline analysis indicated that both affine and non-affine transformations contribute towards the total spline (deformation) of the averaged Class III soft tissue configurations. For non-affine transformations, partial warp (PW) 8 had the highest magnitude, indicating large-scale deformations visualized as labio-mental protrusion, predominantly. In addition, PW9, PW4, and PW5 also had high magnitudes, demonstrating labio-mental vertical compression and antero-posterior compression of the lower labio-mental soft tissues. Thus, Korean children with Class III malocclusions demonstrate antero-posterior and vertical deformations of the labio-mental soft tissue complex with respect to their European-American counterparts. Morphological heterogeneity of the soft tissue integument in subjects of diverse ethnic origin may obscure the underlying skeletal morphology, but the soft tissue integument appears to have minimal ontogenetic association with Class III malocclusions.

Camouflage of moderate Class III malocclusions with extraction of lower second molars and mandibular cervical headgear.

Science.gov (United States)

Mora, Diego Rey; Oberti, Giovanni; Ealo, Martha; Baccetti, Tiziano

2007-01-01

Orthodontic camouflage in patients with slight or moderate skeletal Class III malocclusions, can be obtained through different treatment alternatives. The purpose of this paper is to present a treatment that has not been described in the literature and which consists of the extraction of lower second molars and distal movement of the posterior segments by means of mandibular cervical headgear (MCH) and fixed appliances as a camouflage alternative. The force applied by the MCH was 250 gr per side (14hr/day). The total treatment time was 1 1/2 years. the extraction of lower second molars along with the use of mandibular cervical headgear is a good treatment alternative for camouflage in moderate Class III patients in order to obtain good occlusal relationships without affecting facial esthetics or producing marked dental compensations.

Má oclusão Classe III de Angle, subdivisão direita, tratada sem exodontias e com controle de crescimento Angle Class III malocclusion, subdivision right, treated without extractions and with growth control

Directory of Open Access Journals (Sweden)

Sérgio Henrique Casarim Fernandes

2010-12-01

Full Text Available A Classe III de Angle é uma má oclusão caracterizada por discrepâncias anteroposteriores dentárias e faciais, normalmente acompanhadas por alterações esqueléticas, com componente genético associado. O diagnóstico precoce e correto e o tratamento adequado são de suma importância para promover o controle do crescimento e evitar recidivas. Este artigo relata o tratamento, executado em duas fases, de uma paciente do sexo feminino de 12 anos de idade, apresentando uma má oclusão de Classe III de Angle, subdivisão direita, com mordida cruzada anterior em máxima intercuspidação habitual (MIH e topo em relação cêntrica (RC, apresentando, ainda, falta de espaço na maxila, que foi tratada sem exodontias e com controle de crescimento. Esse caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 1, ou seja, uma má oclusão Classe III de Angle, tratada sem exodontias e com controle de crescimento, como parte dos requisitos para a obtenção do título de Diplomado pelo BBOAngle Class III malocclusion is characterized by anteroposterior dental and facial discrepancies usually accompanied by skeletal changes associated with a genetic component. Early, accurate diagnosis and appropriate treatment are of paramount importance to promote growth control and prevent relapse. This article reports the two-phase treatment of a female patient, aged 12 years, with an Angle Class III, subdivision right malocclusion with anterior crossbite in maximum intercuspation (MIC and end-on bite in centric relation, further presenting with lack of maxillary space. The case was treated without extractions and with growth control. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as representative of Category 1, i.e., Angle Class III malocclusion treated without tooth extractions, as part of the requirements for obtaining the BBO Diploma

Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

Science.gov (United States)

Jing, Yan; Han, Xianglong; Guo, Yongwen; Li, Jingyu; Bai, Ding

2013-06-01

This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

An Assessment of the Quality of Life of Patients With Class III Deformities Treated With Orthognathic Surgery.

Science.gov (United States)

Kilinc, Adnan; Ertas, Umit

2015-07-01

To evaluate quality of life (QoL) from a broad perspective by a comparison of Turkish patients undergoing orthognathic surgery to correct Angle Class III skeletal deformity with a control group composed of participants without dentofacial deformity using general health, generic oral health, and condition-specific QoL approaches. Thirty patients who underwent orthognathic surgery to correct Class III relations (monomaxillary and bimaxillary groups) and 30 participants with Class I skeletal structure and good dentofacial harmony (control group) were evaluated. Condition-specific QoL through a 22-item Orthognathic Quality of Life Questionnaire (OQLQ), generic oral health-related QoL through a 14-item Short-Form Oral Health Impact Profile (OHIP-14), and generic health-related QoL through a 36-item Short-Form Health Survey (SF-36) were assessed. When the groups were compared, OQLQ scores showed a significant difference in the oral function domain only in the bimaxillary group (P orthognathic surgical patients appeared to be similar to that of participants without dentofacial deformities. Oral health-related QoL of orthognathic surgical patients seemed moderately similar to that of participants without dentofacial deformities. The combined use of these methods is helpful for evaluating QoL from a larger perspective. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

"Converting a bi-jaw surgery to a single-jaw surgery:" Posterior maxillary dentoalveolar intrusion with microimplants to avoid the need of a maxillary surgery in the surgical management of skeletal Class III vertical malocclusion

Directory of Open Access Journals (Sweden)

Abhisek Ghosh

2016-01-01

Full Text Available The management of a vertical skeletal Class III malocclusion with mandibular prognathism revolves around the protocol of bi-jaw surgery (maxillary LeFort I impaction and mandibular bilateral sagittal split osteotomy with setback. The maxillary surgery not only provides increased stability to the ultimate surgical outcome but also increases the amount by which the mandibular set back can be done, therefore aiding in greater profile improvement. With the need of maxillary surgery almost inevitable in treating such situations, the complexity and the increased discomfort associated with such surgery can never be ignored. Is it at all possible to convert a bi-jaw surgery into a single-jaw surgery with the aid of microimplants? With increasing number of patients being treated with microimplants for anterior openbite and gummy smiles, our idea was to incorporate this novel protocol in treating Class III vertical situations and therefore avoid the need of a maxillary surgery in treating such a situation, together with achieving optimum treatment outcome.

Comparison of interradicular distances and cortical bone thickness in Thai patients with class I and class II skeletal patterns using cone-beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Khumsarn, Nattida [Dental Division of Lamphun Hospital, Lamphun (Thailand); Patanaporn, Virush; Janhom, Apirum; Jotikasthira, Dhirawat [Faculty of Dentistry, Chiang Mai University, Chiang Mai (Thailand)

2016-06-15

This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.

Comparison of interradicular distances and cortical bone thickness in Thai patients with class I and class II skeletal patterns using cone-beam computed tomography

International Nuclear Information System (INIS)

Khumsarn, Nattida; Patanaporn, Virush; Janhom, Apirum; Jotikasthira, Dhirawat

2016-01-01

This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns

Frontal Changes in the Lower Face After Clockwise Rotation of the Maxillomandibular Complex Without Perisurgical Orthodontic Treatment in Angle Class I and Skeletal Class III Women.

Science.gov (United States)

Lee, Sang Woo; Cho, Jeongmok; Kim, Kikap; Ahn, Seung Hyun

2017-06-01

Orthognathic surgery has become more popular to slenderize a wide lower face and to improve facial esthetics in Asian patients with normal occlusion. Clockwise rotation (CR) of the maxillomandibular complex (MMC) steepens the mandibular plane. This study performed a quantitative analysis on the influence of CR on slenderness of the lower face from the frontal view. This retrospective study included 36 female patients with Angle Class I occlusion and skeletal Class III pattern. The subjects underwent CR of the MMC without perioperative orthodontic treatment and change in the occlusion only for the purpose of esthetic improvement. Linear and angular variables were measured on a cephalogram and three-dimensional computed tomography (3D CT) obtained before and at least 6 months after surgery. Data were analyzed using paired t tests and Spearman correlations. Univariate regression analysis was used to predict the postoperative change according to the amount of posterior impaction. The mean posterior impaction was 3.81 mm. All mandibular plane angle (MPA) measurements were increased (ranged from 5.69° to 13.12°, p lower face becomes narrower and more slender as the MMC rotates in a clockwise direction. Orthognathic surgery with CR has the advantage of increasing the MPAs and obtaining natural soft tissue contouring while minimizing the amount of bone resection. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266c .

Finishing occlusion in Class II or Class III molar relation: therapeutic Class II and III.

Science.gov (United States)

Nangia, A; Darendeliler, M A

2001-11-01

The most frequent extraction regime consists of the removal of upper and lower premolars. Depending on anchorage requirements, camouflage treatment options, surgical intervention, or the absence of teeth in only one arch, it may become necessary to finalize the occlusion with a one-dental-unit discrepancy between the upper and lower dental arches. Guidelines are presented for finishing occlusions in Class II or Class III molar relation.

Soft tissue thickness of face profile conditioning by dento-skeletal anomalies

Directory of Open Access Journals (Sweden)

Tanić Tatjana

2011-01-01

Full Text Available Introduction. Orthodontic treatment of dento-skeletal anomalies is generally based on the correction of teeth and jaws relationship, while it is expected that soft facial tissue spontaneously adapts to therapeutically achieved relationship and to accompany hard tissue changes. Objective. To establish facial soft tissue thickness conditioning by the presence of dento-skeletal anomalies. Methods. The study was performed at the Dental Clinic of Niš, and involved the analysis of cephalometric rendgenograms in 121 patients, aged 12-18 years, with no previous orthodontical treatment. According to dento-skeletal relationship between teeth and jaws the patients were divided into four groups; class I (control group, class II of division 1, class II of division 2 and class III. The standard analysis of dento-skeletal profile was done according to Steiner and soft tissue profile according to Burstone was done in all. Results. The patients of class II/1 had a significantly thinner upper lip (t=2.650; p<0.05 and thinner upper lip sulcus (t=1.999; p<0.05. The patients of class II/2 had a significantly thicker upper lip (t=2.912; p<0.01, while those of class III had a significantly thinner lower lip (t=3.900; p<0.001. Conclusion. The thickness of facial soft tissue considerably influences facial profile appearance in persons with a dento-skeletal anomaly. Not only do soft tissues adapt to the existing jaws relationship, but can also camouflage present anomalies.

25 CFR 522.12 - Revocation of class III gaming.

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Revocation of class III gaming. 522.12 Section 522.12 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.12 Revocation of class III...

Cephalometric assessment of lips in skeletal class ii patients by steiner's line

International Nuclear Information System (INIS)

Bokhari, F.; Amin, F.; Asad, S.

2013-01-01

Introduction: Steiner's (S) Line has been used as reference line to assess anteroposterior position of lips cephalometrically and has been an effective diagnostic aid in this era of soft tissue paradigm. Norms for Sline has been established for different populations and it has been used widely to assess treatment outcomes in Skeletal Class II malocclusion, however anteroposterior position of lips and determinants of lip position in Skeletal Class II has not been explored. Study Design: This Prospective study was aimed to find out the anteroposterior position of lips on cephalograph using S-line in patients with retrognathic pro-file and to establish correlation between determinants of lip prominence. Data was collected using nonprobability convenience sampling technique following the selection criteria. Materials and Methods: The study was conducted on 65 subjects, with retrognathic profile as judged by orthodontists in consensus and confirmed by lateral cephalogram (ANB > 4 degree). S-Line was drawn on lateral cephalograph to assess the prominence of upper Lip and lower lip. SPSS 17.0 was used for statistical evaluation. Results: Antero-posterior position of upper and lower lip in patients with retrognathic profile with reference to S-line was 1.96 +- 2.6 mm and 3.09 +- 3.16 mm respectively. Moreover it was found that statistically significant correlation existed between lower lip prominence as assessed by S-line and upper lip prominence using the same reference line (r = 0.411), Lower incisor inclination (r = 0.535) and Skeletal Class II as assessed by ANB angle (r = 0.27). Upper lip prominence as assessed S-line was found to be statistically significantly correlated with lower incisor inclination and lower lip prominence. Discussion: Results were compliant with the previous studies.Conclusion: In the present study both upper and lower lips were more prominent in Skeletal Class II patients as compared to Steiner's norms for skeletal class I. (author)

[Preliminary evaluation on 3-demension changes of facial soft tissue with structure light scanning technique before and after orthognathic surgery of Class III deformities].

Science.gov (United States)

Peng, Ju-xiang; Jiang, Jiu-hui; Zhao, Yi-jiao; Wang, Yong; Li, Ze; Wang, Ning-ning; Feng, Zhi-min

2015-02-18

To evaluate facial soft tissue 3-deminsion changes of skeletal Class III malocclusion patients after orthognathic surgery using structure light scanning technique. Eight patients [3 males and 5 females, aged (27.08 ± 4.42) years] with Class III dentoskeletal relationship who underwent a bimaxillary orthognathic surgical procedure involving advancement of the maxilla by Le Fort I osteotomy and mandibular setback by bilateral sagittal split ramus osteotomy (BSSO) and genioplasty to correct deformity were included. 3D facial images were obtained by structure light scanner for all the patients 2 weeks preoperatively and 6 months postoperatively. The facial soft tissue changes were evaluated in 3-dimension. The linear distances and angulation changes for facial soft tissue landmarks were analyzed. The soft tissue volumetric changes were assessed too. There were significant differences in the sagittal and vertical changes of soft tissue landmarks. The greatest amount of soft tissue change was close to lips. There were more volumetric changes in the chin than in the maxilla, and fewer in the forehead. After biomaxillary surgery, there were significant facial soft tissue differences mainly in the sagittal and vertical dimension for skeletal Class III patients. The structure light 3D scanning technique can be accurately used to estimate the soft tissue changes in patients who undergo orthognathic surgery.

Orthodontic correction of Class III malocclusion in a young patient with the use of a simple fixed appliance.

Science.gov (United States)

Park, Jae Hyun

2012-01-01

Anterior crossbites are one of the most common orthodontic problems we observe in growing children. The first step in treating an anterior crossbite is to determine whether the crossbite is dental or skeletal in nature. To determine a precise diagnosis, a thorough clinical, radiographic and model analysis is required. This article shows the treatment of Class III malocclusion by correcting anterior dental crossbite with the use of a simple fixed appliance.

Complex networks for data-driven medicine: the case of Class III dentoskeletal disharmony

International Nuclear Information System (INIS)

Scala, A; Auconi, P; Scazzocchio, M; Caldarelli, G; McNamara, JA; Franchi, L

2014-01-01

In the last decade, the availability of innovative algorithms derived from complexity theory has inspired the development of highly detailed models in various fields, including physics, biology, ecology, economy, and medicine. Due to the availability of novel and ever more sophisticated diagnostic procedures, all biomedical disciplines face the problem of using the increasing amount of information concerning each patient to improve diagnosis and prevention. In particular, in the discipline of orthodontics the current diagnostic approach based on clinical and radiographic data is problematic due to the complexity of craniofacial features and to the numerous interacting co-dependent skeletal and dentoalveolar components. In this study, we demonstrate the capability of computational methods such as network analysis and module detection to extract organizing principles in 70 patients with excessive mandibular skeletal protrusion with underbite, a condition known in orthodontics as Class III malocclusion. Our results could possibly constitute a template framework for organising the increasing amount of medical data available for patients’ diagnosis. (paper)

Treatment outcome of bimaxillary surgery for asymmetric skeletal class II deformity.

Science.gov (United States)

Chen, Yun-Fang; Liao, Yu-Fang; Chen, Yin-An; Chen, Yu-Ray

2018-05-04

Facial asymmetry is one of the main concerns in patients with a dentofacial deformity. The aims of the study were to (1) evaluate the changes in facial asymmetry after bimaxillary surgery for asymmetric skeletal class II deformity and (2) compare preoperative and postoperative facial asymmetry of class II patients with normal controls. The facial asymmetry was assessed for 30 adults (21 women and 9 men, mean age: 29.3 years) who consecutively underwent bimaxillary surgery for asymmetric skeletal class II deformity using cone-beam computed tomography before and at least 6 months after surgery. Thirty soft tissue and two dental landmarks were identified on each three-dimensional facial image, and the asymmetry index of each landmark was calculated. Results were compared with those of 30 normal control subjects (21 women and 9 men, mean age: 26.2 years) with skeletal class I structure. Six months after surgery, the asymmetric index of the lower face and total face decreased significantly (17.8 ± 29.4 and 16.6 ± 29.5 mm, respectively, both p class II patients had residual chin asymmetry. The postoperative total face asymmetric index was positively correlated with the preoperative asymmetric index (r = 0.37, p class II deformity resulted in a significant improvement in lower face asymmetry. However, approximately 50% of the patients still had residual chin asymmetry. The total face postoperative asymmetry was moderately related to the initial severity of asymmetry. These findings could help clinicians better understand orthognathic outcomes on different facial regions for patients with asymmetric class II deformity.

Lip line changes in Class III facial asymmetry patients after orthodontic camouflage treatment, one-jaw surgery, and two-jaw surgery: A preliminary study.

Science.gov (United States)

Lee, Gung-Chol; Yoo, Jo-Kwang; Kim, Seong-Hun; Moon, Cheol-Hyun

2017-03-01

To evaluate the effects of orthodontic camouflage treatment (OCT), one-jaw surgery, and two-jaw surgery on the correction of lip line cant (LLC) and to examine factors affecting the correction of LLC in Class III craniofacial asymmetry patients. A sample of 30 Class III craniofacial asymmetry patients was divided into OCT (n = 10), one-jaw surgery (n = 10), and two-jaw surgery (n = 10) groups such that the pretreatment LLC was similar in each group. Pretreatment and posttreatment cone-beam computed tomography scans were used to measure dental and skeletal parameters and LLC. Pretreatment and posttreatment measurements were compared within groups and between groups. Pearson's correlation tests and multiple regression analyses were performed to investigate factors affecting the amount and rate of LLC correction. The average LLC correction was 1.00° in the one-jaw surgery group, and in the two-jaw surgery group, it was 1.71°. In the OCT group it was -0.04°, which differed statistically significantly from the LLC correction in the other two groups. The amount and rate of LLC correction could be explained by settling of skeletal discrepancies or LLC at pretreatment with goodness of fit percentages of approximately 82% and 41%, respectively. Orthognathic surgery resulted in significant correction of LLC in Class III craniofacial asymmetry patients, while OCT did not.

Treatment of Class III malocclusion in a young adult patient: a case report.

Science.gov (United States)

Kiran, B H Jyothi; Kumar, Prashanth; Ravi, S; Shivalinga, B M; Bhagyalaxmi; Pradeep; Kudagi, Vishal

2012-01-01

This article describes the treatment of a young adult male with a concave profile, skeletal class III malocclusion because of a prognathic mandible and proclined upper incisors. The therapy included stages: 1. Pre-surgical orthodontics involving leveling and aligning of upper and lower arches, protraction of lower molars and retraction of upper incisors; 2. Surgical phase involving BSSO with mandibular setback and 3. Post-surgical orthodontics for finishing and detailing. The treatment lasted 23 months and improved facial esthetics significantly The treatment resulted in a functional occlusion with a lack of lateral cuspid guidance that could be accepted considering the difficulty of the case. Over jet and overbite are within norms.

Comprehensive surgical. Orthodontic treatment of class III malocclusion in cleft patient involving minimally invasive surgery Case report and literature review.

Science.gov (United States)

Stojkovic, Goran; Stojkovic, Miodrag; Stojkovic, Jasna; Nikolic, Dejan; Stajcic, Zoran

2016-12-19

Surgical and orthodontic treatment of a teenage cleft patient. Authors describe the case of a 13 year old female cleft patient presented with class III malocclusion RESULT: The patient underwent comprehensive surgical secondary bone grafting and orthodontic treatment. Stable skeletal and occlusal class I relationship was achived and maintained in the post treatment observation period till the age of 16. Although several authors suggests primary gingivoperiosteoplasty, other advocates that such early intervention can cause later restrictions in maxillary growth. For alveolar reconstruction, maxillary growth and dental age were the main considerations in determining the timing of surgical intervention. This case showed that borderline cases of complex dentoalveolar and skeletal anomaly in cleft patients could be successfully treated with comprehensive secondary bone grafting and orthodontic treatment thus avoiding the need for orthognatic surgery. Alveolar bone grafting, Cleft, Malocclusion.

Gait and Function in Class III Obesity

Directory of Open Access Journals (Sweden)

Catherine Ling

2012-01-01

Full Text Available Walking, more specifically gait, is an essential component of daily living. Walking is a very different activity for individuals with a Body Mass Index (BMI of 40 or more (Class III obesity compared with those who are overweight or obese with a BMI between 26–35. Yet all obesity weight classes receive the same physical activity guidelines and recommendations. This observational study examined the components of function and disability in a group with Class III obesity and a group that is overweight or has Class I obesity. Significant differences were found between the groups in the areas of gait, body size, health condition, and activity capacity and participation. The Timed Up and Go test, gait velocity, hip circumference, and stance width appear to be most predictive of activity capacity as observed during gait assessment. The findings indicate that Class III-related gait is pathologic and not a normal adaptation.

Differences in three-dimensional soft tissue changes after upper, lower, or both jaw orthognathic surgery in skeletal class III patients.

Science.gov (United States)

Verdenik, M; Ihan Hren, N

2014-11-01

The decision is not always straightforward as to which orthognathic procedure is best for a good aesthetic result; three-dimensional imaging has brought new insight into this topic. The aim of this prospective study was to verify objectively whether postoperative changes occur within those regions not directly affected by surgical movements of the underlying jaw bones. The study included 83 young adults with skeletal class III deformities. They were classified into three groups according to the type of surgery: bilateral sagittal split osteotomy set-back of the mandible (BSSO), Le Fort I advancement of the maxilla, or a combination of both. Pre- and postoperative optical scans were registered as regional best-fits on the areas of the foreheads and both orbits. The shell to shell differences were measured and the average distances between the observed regions were calculated. As expected, changes were greatest in the regions where the underlying bones had been moved, but regardless of the operation performed, changes were found over the whole face. Changes in the nose, cheek, and upper lip regions in the BSSO group and in the lower lip and chin region in the Le Fort I group confirmed the concept of the facial soft tissue mask acting as one unit. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Dentofacial effects of skeletal anchored treatment modalities for the correction of maxillary retrognathia.

Science.gov (United States)

Sar, Cağla; Sahinoğlu, Zahire; Özçirpici, Ayça Arman; Uçkan, Sina

2014-01-01

The aim of this clinical study was to investigate the skeletal, dentoalveolar, and soft-tissue effects of 2 skeletal anchorage rationales for Class III treatment compared with an untreated Class III control group. Fifty-one subjects who were in the prepubertal or pubertal growth period were included in the study. In group 1 (n = 17), facemasks were applied from miniplates placed in the lateral nasal walls of the maxilla, and intermaxillary Class III elastics were applied from symphyseal miniplates to a bonded appliance on the maxilla in group 2 (n = 17). These skeletal anchored groups were compared with an untreated control group (n = 17). Lateral cephalometric radiographs were obtained at the beginning and the end of the observation periods in all groups and analyzed according to the structural superimposition method. Differences between the groups were assessed with the Wilcoxon signed rank test or the paired-samples t test. The treatment periods were 7.4 and 7.6 months in groups 1 and 2, respectively, and the untreated control group was observed for 7.5 months. The maxilla moved forward by 3.11 mm in group 1 and by 3.82 mm in group 2. The counterclockwise rotation of the maxilla was significantly less in group 1 compared with group 2 (P <0.01). The mandible showed clockwise rotation and was positioned downward and backward in the treatment groups, and it was significantly greater in group 2 compared with group 1 (P <0.01). Changes in the maxillary incisor measurements were negligible in group 1 compared with group 2. A significant amount of mandibular incisor retroclination was seen in group 1, and a significant proclination was seen in group 2. The maxillomandibular relationships and the soft-tissue profiles were improved remarkably in both treatment groups. The protocols of miniplates with facemasks and miniplates with Class III elastics offer valid alternatives to conventional methods in severe skeletal Class III patients. However, the 2 maxillary

Skeletal and dental changes induced by bionator in early treatment of class II

Directory of Open Access Journals (Sweden)

Dirceu Barnabé Raveli

2016-09-01

Full Text Available The purpose was to investigate the amount of skeletal and dentoalveolar changes after early treatment of Class II, Division 1 malocclusion with bionator appliance in prepubertal growing patients. Forty Class II patients were divided in two groups. Treated group consisted of 20 subjects treated consecutively with bionator. Mean age at the start of treatment (T0 was 9.1 years, while it was 10.6 years at the end of treatment (T1. Mean treatment time was 17.7 months. Pretreatment and post-treatment cephalometric records of treated group were evaluated and compared with a control group consisted of 20 patients with untreated Class II malocclusion. Intergroup comparisons were performed using Student’s t-tests and chi-square test with Yates’ correction at a significance level of 5 per cent. Bionator appliance was effective in generating differential growth between the jaws. Cephalometric skeletal measurements ANB, WITS, Lafh, Co-A and dental L6-Mp, U1.Pp, IsIi, OB, OJ showed statistically significantly different from the control. Bionator induced more dentoalveolar changes than skeletal during treatment in prepubertal stage.

Surgical-orthodontic treatment of Class III malocclusion with agenesis of lateral incisor and unerupted canine

Directory of Open Access Journals (Sweden)

Bruno Boaventura Vieira

2013-06-01

Full Text Available INTRODUCTION: Orthodontic-surgical treatment was performed in patient with skeletal Class III malocclusion due to exceeding mandibular growth. Patient also presented upper and lower dental protrusion, overjet of -3.0 mm, overbite of -1.0 mm, congenital absence of tooth #22, teeth #13 and supernumerary impaction, tooth #12 with conoid shape and partly erupted in supraversion, prolonged retention of tooth #53, tendency to vertical growth of the face and facial asymmetry. The discrepancy on the upper arch was -2.0 mm and -5.0 mm on the lower arch. METHODS: The pre-surgical orthodontic treatment was performed with extractions of the teeth #35 and #45. On the upper arch, teeth #53, #12 and supernumerary were extracted to accomplish the traction of the impacted canine. The spaces of the lower extractions were closed with mesialization of posterior segment. After aligning and leveling the teeth, extractions spaces closure and correct positioning of teeth on the bone bases, the correct intercuspation of the dental arch, with molars and canines in Angle's Class I, coincident midline, normal overjet and overbite and ideal torques, were evaluated through study models. The patient was submitted to orthognathic surgery and then the post-surgical orthodontic treatment was finished. RESULTS: The Class III malocclusion was treated establishing occlusal and facial normal standards.

Surgical correction of class II skeletal malocclusion in an adult patient

Directory of Open Access Journals (Sweden)

Ramakrishnan Balachander

2014-01-01

Full Text Available Correction of skeletal deformities in adult patients with orthodontics is limited. Orthognathic surgery is the best option for cases when camouflage treatment is questionable and growth modulation is not possible. This case report illustrates the benefit of the team approach in correcting vertical maxillary excess along with class II skeletal deformity. A cosmetic correction was achieved by superior repositioning of maxilla with LeFort I osteotomy and augmentation genioplasty, along with orthodontic treatment. The patient′s facial appearance was markedly improved along with functional and stable occlusion

The biowaiver extension for BCS class III drugs: the effect of dissolution rate on the bioequivalence of BCS class III immediate-release drugs predicted by computer simulation.

Science.gov (United States)

Tsume, Yasuhiro; Amidon, Gordon L

2010-08-02

The Biopharmaceutical Classification System (BCS) guidance issued by the FDA allows waivers for in vivo bioavailability and bioequivalence studies for immediate-release (IR) solid oral dosage forms only for BCS class I drugs. However, a number of drugs within BCS class III have been proposed to be eligible for biowaivers. The World Health Organization (WHO) has shortened the requisite dissolution time of BCS class III drugs on their Essential Medicine List (EML) from 30 to 15 min for extended biowaivers; however, the impact of the shorter dissolution time on AUC(0-inf) and C(max) is unknown. The objectives of this investigation were to assess the ability of gastrointestinal simulation software to predict the oral absorption of the BCS class I drugs propranolol and metoprolol and the BCS class III drugs cimetidine, atenolol, and amoxicillin, and to perform in silico bioequivalence studies to assess the feasibility of extending biowaivers to BCS class III drugs. The drug absorption from the gastrointestinal tract was predicted using physicochemical and pharmacokinetic properties of test drugs provided by GastroPlus (version 6.0). Virtual trials with a 200 mL dose volume at different drug release rates (T(85%) = 15 to 180 min) were performed to predict the oral absorption (C(max) and AUC(0-inf)) of the above drugs. Both BCS class I drugs satisfied bioequivalence with regard to the release rates up to 120 min. The results with BCS class III drugs demonstrated bioequivalence using the prolonged release rate, T(85%) = 45 or 60 min, indicating that the dissolution standard for bioequivalence is dependent on the intestinal membrane permeability and permeability profile throughout the gastrointestinal tract. The results of GastroPlus simulations indicate that the dissolution rate of BCS class III drugs could be prolonged to the point where dissolution, rather than permeability, would control the overall absorption. For BCS class III drugs with intestinal absorption patterns

[Alveolar bone thickness and root length changes in the treatment of skeletal Class III patients facilitated by improved corticotomy: a cone-beam CT analysis].

Science.gov (United States)

Wu, Jiaqi; Jiang, Jiuhui; Xu, Li; Liang, Cheng; Li, Cuiying; Xu, Xiao

2015-04-01

To evaluate the alveolar bone thickness and root length changes of anterior teeth with cone-beam computed tomography (CBCT). CBCT scans were taken for 12 skeletal Class III patients who accepted the improved corticotomy (IC) procedures during pre-surgical orthodontics. The CBCT data in T1 (the maxillary dental arch was aligned and leveled) and T2 (extraction space closure) were superimposed and the alveolar bone thickness at root apex level and root length measurements were done. From T1 to T2, the buccal alveolar bone thickness for the upper lateral incisors increased from (1.89±0.83) to (2.47±1.02) mm (P<0.05), and for central incisors and for canines from (2.32±0.71) to (2.68±1.48) mm and from (2.28±1.08) to (2.41±1.40) mm, respectively. According to Sharpe Grading System, the root resorption grade for 69 teeth of 72 was located in Grade 1, two teeth in Grade 2, one tooth in Grade 3. The improved corticotomy had the potential to increase the buccal alveolar bone thickness and the root resorption in most teeth was in Grade 1 according to Sharpe grading system.

Lower lip deformity in patients with cleft and non-cleft Class III malocclusion before and after orthognathic surgery.

Science.gov (United States)

Park, Joo Seok; Koh, Kyung S; Choi, Jong Woo

2015-10-01

Orthognathic surgery does not yield the same cosmetic benefits in patients with Class III jaw deformities associated with clefts as for patients without clefts. Preoperative upper lip tightness caused by cleft lip repair may not fully explain this difference, suggesting that a lower lip deformity is present. The study compared the outcomes of orthognathic surgery in patients with cleft and non-cleft Class III malocclusion, focusing on lip relationship. The surgical records of 50 patients with Class III malocclusion, including 25 with and 25 without clefts, who had undergone orthognathic surgery, were retrospectively analyzed. Lateral cephalometric tracings, preoperatively and at 6 months postoperatively, were superimposed to analyze the soft tissue changes at seven reference points. At 6 months after surgery, there were no significant differences in skeletal location, whereas the soft tissues of the lower lip differed significantly between patients with and without cleft (p=0.002), indicating the persistence of a lower lip deformity in cleft patients. Moreover, the soft tissues of the lower lip receded in non-cleft patients and protruded in cleft patients after orthognathic surgery. Lower lip deformity and upper lip tightness may result in an unsatisfactory relationship between the upper and lower lips of patients with cleft-related jaw deformity after orthognathic surgery. Other factors were less important than the pathology of the lower lip. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Morphometric Analysis of the Mandible in Subjects with Class III Malocclusion

Directory of Open Access Journals (Sweden)

Jin-Yun Pan

2006-07-01

Full Text Available This study evaluated the deformations that contribute to Class III mandibular configuration, employing geometric morphometric analysis. Lateral cephalograms of male and female groups of 100 young adults and 70 children with Class III malocclusion were compared to those of counterparts with normal occlusion. The sample included an equal number of both genders. The cephalographs were traced, and 12 homologous landmarks were identified and digitized. Average mandibular geometries were generated by means of Procrustes analysis. Thin-plate spline analysis was then applied to mandibular configurations to determine local form differences in male and female groups of adults and children with normal occlusion and Class III malocclusion. The mandibular morphology was significantly different between these two groups of male and female adults, and children (p < 0.0001. This spline analysis revealed an anteroposterior elongation of the mandible along the condylion-gnathion axis, showing an extension in the regions of the mandibular condyle and ramus, and of the anteroinferior portion of the mandibular symphysis in Class III groups. More extension was evident in Class III adults. The deformations in subjects with Class III malocclusion may represent a developmental elongation of the mandible anteroposteriorly, which leads to the appearance of a prognathic mandibular profile.

Class III malocclusion with complex problems of lateral open bite and severe crowding successfully treated with miniscrew anchorage and lingual orthodontic brackets.

Science.gov (United States)

Yanagita, Takeshi; Kuroda, Shingo; Takano-Yamamoto, Teruko; Yamashiro, Takashi

2011-05-01

In this article, we report the successful use of miniscrews in a patient with an Angle Class III malocclusion, lateral open bite, midline deviation, and severe crowding. Simultaneously resolving such problems with conventional Class III treatment is difficult. In this case, the treatment procedure was even more challenging because the patient preferred to have lingual brackets on the maxillary teeth. As a result, miniscrews were used to facilitate significant asymmetric tooth movement in the posterior and downward directions; this contributed to the camouflage of the skeletal mandibular protrusion together with complete resolution of the severe crowding and lateral open bite. Analysis of the jaw motion showed that irregularities in chewing movement were also resolved, and a stable occlusion was achieved. Improvements in the facial profile and dental arches remained stable at the 18-month follow-up. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Limiting factors in the class III camouflage treatment: a potential protocol].

Science.gov (United States)

Chaques Asensi, José

2016-06-01

The Class III skeletal malocclusion has been traditionally treated with a combined approach of orthodontics and orthognathic surgery or with a strategy of orthodontic camouflage. Some severe cases can be identified as ideal candidates for a surgical treatment whereas some others can be handled with orthodontics alone, with a reasonable expectation of an acceptable result. However, the problem remains for the borderline patient. In fact, limited information is available in the literature regarding the identification of the factors that can help in establishing the limits for one treatment modality or the other. Furthermore, the quantification of some of these factors, for practical purposes, is practically missing or very seldom suggested. Therefore, the decision making process remains a subjective reflection based on the "good clinical sense" of the orthodontist or just reduced to an "educated guess". In order to add some information, hopefully useful in deciding the most suitable treatment option for the individual patient, we propose a clinical protocol based on four different factors. Namely: the skeletal discrepancy, the occlusal discrepancy, the periodontal condition and facial aesthetics. For each one of these factors several parameters will be evaluated and, for some of them, an attempt to provide some reference numerical values will be made. Finally, clinical examples will be presented to illustrate the concepts discussed and the treatment alternatives, final treatment plan and treatment outcome will be analyzed for each one of them. © EDP Sciences, SFODF, 2016.

Comparison of short-term effects between face mask and skeletal anchorage therapy with intermaxillary elastics in patients with maxillary retrognathia.

Science.gov (United States)

Ağlarcı, Cahide; Esenlik, Elçin; Fındık, Yavuz

2016-06-01

The aim of this study was to compare the short-term dental and skeletal effects of a face mask (FM) with those of skeletal anchorage (SA) therapy with intermaxillary elastics in prepubertal patients with skeletal Class III malocclusion. Fifty patients with skeletal Class III malocclusion and maxillary deficiency were divided into two groups. In the FM group, an FM was applied by a bite plate with a force of 400g for each side. In the SA group, mini-plates were placed between mandibular lateral incisors and canines, and mini-implants were inserted between maxillary second premolars and first molars. A bite plate was inserted into the upper arch, and Class III elastics were applied with a force of 200g between each mini-plate and mini-implant. Mean treatment durations were 0.52±0.09 years for FM and 0.76±0.09 years for SA. After the treatment, statistically significant increases in SNA°, ANB°, A-y, 1-NA, SnGoGn°, Co-A, Co-Gn, and A-Nperp, and reductions in SNB° and FH┴N-Pg were observed in both groups, and these changes were similar in both groups. In the FM group, 1-NB decreased significantly, and in the SA group, it increased significantly (P journals.permissions@oup.com.

25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or until...

Long-term skeletal effects of high-pull headgear followed by fixed appliances for the treatment of Class II malocclusions.

Science.gov (United States)

Bilbo, E Erin; Marshall, Steven D; Southard, Karin A; Allareddy, Verrasathpurush; Holton, Nathan; Thames, Allyn M; Otsby, Marlene S; Southard, Thomas E

2018-04-18

The long-term skeletal effects of Class II treatment in growing individuals using high-pull facebow headgear and fixed edgewise appliances have not been reported. The purpose of this study was to evaluate the long-term skeletal effects of treatment using high-pull headgear followed by fixed orthodontic appliances compared to an untreated control group. Changes in anteroposterior and vertical cephalometric measurements of 42 Class II subjects (n = 21, mean age = 10.7 years) before treatment, after headgear correction to Class I molar relationship, after treatment with fixed appliances, and after long-term retention (mean 4.1 years), were compared to similar changes in a matched control group (n = 21, mean age = 10.9 years) by multivariable linear regression models. Compared to control, the study group displayed significant long-term horizontal restriction of A-point (SNA = -1.925°, P appliances resulted in correction to Class I molar through restriction of horizontal maxillary growth with continued horizontal mandibular growth and vertical skeletal changes unaffected. The anteroposterior molar correction and skeletal effects of this treatment were stable long term.

Bilateral sagittal split osteotomy: Surgery first approach for correction of skeletal Class II

Directory of Open Access Journals (Sweden)

Revathi Peddu

2018-01-01

Full Text Available Most of the skeletal malocclusions which require orthognathic surgeries are treated by traditional approach which requires time-consuming and unesthetic presurgical orthodontic phase. Surgery first approach (SFA avoids these disadvantages of the traditional approach. A 24-year-old female patient with skeletal and dental class II malocclusion due to retrognathic mandible was treated with SFA. Bilateral sagittal split osteotomy with mandibular advancement was done immediately after initial alignment and closure of the existing spaces in the maxillary arch. Angle's class I molar and canine relation was achieved after surgery. Bonding of the mandibular arch was done after 1 month of orthognathic surgery and treatment was completed within 13 months. A wrap-around retainer was placed in upper arch, and bonded lingual retainer was given in the lower arch.

Do Class III patients have a different growth spurt than the general population?

Science.gov (United States)

Lee, Yun-Sik; Lee, Shin-Jae; An, Hongseok; Donatelli, Richard E; Kim, Soo-Hwan

2012-11-01

Understanding the timing and length of the growth spurt of Class III prognathic patients is fundamental to the strategy of interceptive orthopedic orthodontics as well as to the timing of orthognathic surgery. Consequently, this study was undertaken to determine whether there are any significant differences in the stature growth pattern of Class III subjects compared with non-Class III subjects and the general population. Twelve-year longitudinal stature growth data were collected for 402 randomly selected adolescents in the general population, 55 Class III mandibular prognathic patients, and 37 non-Class III patients. The growth data were analyzed by using the traditional linear interpolation method and nonlinear growth functions. The 6 stature growth parameters were measured: age at takeoff, stature at takeoff, velocity at takeoff, age at peak height velocity, stature at peak height velocity, and velocity at peak height velocity. Comparisons in the stature growth parameters and 15 cephalometric variables among the general population, Class III subjects, and non-Class III subjects were made with multivariate analysis. Patients with Class III prognathism did not have different growth parameters compared with Class II subjects or the general population. This study does not allow meaningful conclusions with regard to the relationship of mandibular size and stature growth pattern. The application of nonlinear growth curves vs the traditional linear interpolation method was also discussed. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

PENGGUNAAN FACE-MASK & EKSPANSI PALATAL PADA PERAWATAN MALOKLUSI KLAS III (Studi Pustaka)

OpenAIRE

Krisnawati Krisnawati

2015-01-01

Class III skeletal anomaly is one of the most difficult malocclusions to correct in orthodontics. Orthodontist usually involved chincup appliances to restrain mandibular growth, camouflage techniques to advances maxillary incisors and retract mandibular incisors or waiting untul growth ceased to pursue orthognathic surgery. Many studies found that most of Class III malocclusions were characterized by maxillary retrognathism. In the late 1960s, the Delaire mask was popularized to protract the ...

Crown-root morphology of lower incisors in patients with class III malocclusion.

Science.gov (United States)

Wang, Bo; Shen, Guofang; Fang, Bing; Zhang, Li

2012-07-01

The purpose of this study was to investigate the crown-root morphology of lower incisors in patients with class III malocclusion using cone-beam computed tomography. Cone-beam computed tomography images were analyzed from 53 adult class I patients (group 1), 37 preadolescent class III patients (group 2), and 66 adult class III patients (group 3) comprising 3 divisions (divisions 1, 2, and 3 corresponded to mild, moderate, and severe class III malocclusions). The size and crown-root angulations of lower incisors in different groups and divisions were statistically appraised with group 1 used as the control group. No significant differences were found for the size of lower incisors among different groups and divisions (P > 0.05). Compared with group 1, the crown-root angulations of lower incisors in groups 2 and 3 were significantly larger (P lower incisors of division 3 rather than divisions 2 and 3 exhibited larger crown-root angulations (P lower incisors in class III patients during orthodontic and orthognathic treatment, especially in severe ones.

Má oclusão Classe III, com mordida cruzada posterior unilateral e assimetria facial Class III malocclusion with unilateral posterior crossbite and facial asymmetry

Directory of Open Access Journals (Sweden)

Silvio Rosan de Oliveira

2010-10-01

Full Text Available Este artigo relata o tratamento ortodôntico realizado em uma paciente adulta, com 36 anos de idade, portadora de um padrão esquelético e dentário de Classe III, com mordida cruzada posterior unilateral esquerda e assimetria mandibular, além de uma diferença relativamente grande entre máxima intercuspidação habitual (MIH e relação cêntrica (RC. O tratamento foi realizado com expansão dentária superior, contração dentária inferior e descruzamento anterior, eliminando a diferença entre MIH e RC. O resultado obtido foi pautado sobre um diagnóstico criterioso e um planejamento de compensação ortodôntica, sem intervenção cirúrgica nos maxilares, por solicitação da paciente. Este caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 5, ou seja, má oclusão com problema transverso, apresentando pelo menos um quadrante em cruzamento, como parte dos requisitos para obtenção do título de Diplomado pelo BBO.This article reports on the orthodontic treatment performed on a 36-year-old female patient with skeletal and dental Class III pattern, presenting with a left unilateral posterior crossbite and mandibular asymmetry, and a relatively significant difference between maximum intercuspation (MIC and centric relation (CR. The treatment was performed with maxillary dental expansion, mandibular dental contraction and anterior crossbite correction, eliminating the difference between MIC and CR. Results were based on careful diagnosis and planning of orthodontic compensation without surgical intervention in the maxilla, at the request of the patient. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as representative of Category 5, i.e., malocclusion with a transverse problem, presenting with a crossbite in at least one of the quadrants, as part of the requirements for obtaining the BBO Certificate.

[Pre- and post-surgical orthodontic treatment for skeletal open bite].

Science.gov (United States)

Zhou, Y; Hu, W; Sun, Y

2001-05-01

To Study the principles and rules of pre- and post-surgical orthodontic treatment for skeletal open bite patients. Thirty-two surgically treated open bite cases were analyzed, of which 9 were males, and 23 were females, aged from 16 to 38. Open bite was from 1 to 8.5 mm, average was 4 mm. 31 patients were Class III malocclusion, while 1 patient was Class II malocclusion. 1. Totally 21 patients were treated with orthodontics before and after orthognathic surgery, while 8 patients had pre-surgical orthodontics only, and other 3 had post-surgical orthodontics only. The duration for pre-surgical orthodontics was from 4 to 33 months, average was 12 months. The duration for post-surgical orthodontics was from 3 to 17 months, average was 8.5 months. 2. Presurgical orthodontic treatment included: Alignment of arches, decompensation of incisors, avoiding extrusion of incisors, and slight expansion of arches for coordination of arches. 3. Post-surgical orthodontic treatment included: Closure of residual spaces in the arches, realignment of arches, vertical elastics and Class II or III intermaxillary elastics. Skeletal open bites require combined orthodontic-orthognathic surgery for optimal and esthetical pleasing results.

Early treatment of Class III malocclusion with a tandem traction bow appliance

Directory of Open Access Journals (Sweden)

Sneha Basaveshwar Valgadde

2016-01-01

Full Text Available Since Class III malocclusion is progressive in nature, the facial growth of Class III malocclusion worsens with age. Class III malocclusion is associated with a deviation in the sagittal relationship of the maxilla and the mandible, characterized by a deficient maxilla, retrognathic mandible, or a combination of both. The early orthopedic treatment of Class III malocclusions, at the end of primary dentition or the beginning of mixed dentition, prior to growth spurt, allows the accomplishment of successful results, providing facial balance, modifying the maxillofacial growth and development, and in many instances, preventing a future surgical treatment by increasing the stability. Many treatment approaches can be found in the literature regarding orthopedic and orthodontic treatment of Class III malocclusion, including intra- and extra-oral appliances. The major problem with extraoral anchorage has been of patient compliance due to its physical appearance. The case report presents an intraoral modified tandem appliance for maxillary protraction that has been used clinically to achieve successful results without relying much on patient co-operation.

Skeletal muscle proton T 2 in chronic heart failure

International Nuclear Information System (INIS)

Morvan, D.; Richard, B.

1995-01-01

To evaluate the interest of proton T 2 measurement of skeletal muscle at rest and with exercise in patients with chronic heart failure, we performed associated measurements of proton T 2 using magnetic resonance imaging, of external work using ergometry, and of intra-cellular pH (pH) using magnetic resonance 31 P-spectroscopy, in skeletal muscle of the leg anterior compartment, in 37 patients with chronic heart failure. Sixteen patients were in New York Heart Association class II (NYHA II, moderate cardiac failure) and 21 in NYHA classes III-IV (severe cardiac failure). Rest T 2 was significantly increased in NYHA III-IV patients (30.9 ± 2.2 versus 32.8 ± 209 ms, p i variations were of -8 ± 4 versus -9 ± 5%, p =3D NS. The ratio of relative T 2 variations to W was significantly increased in NYPH III-IV patients (0.24 ± 0.12 versus 0.60 ± 0.41%/J, p i with exercise were coupled with external work, only in group NYHA II. T 2 variations negatively correlated with those of pH i in both groups (r=3D -0.78, p i variations with exercise which seems to depend on the exercise intensity level. (authors). 22 refs., 3 figs., 2 tabs

Condition-specific Quality of Life Assessment at Each Stage of Class III Surgical Orthodontic Treatment -A Prospective Study.

Science.gov (United States)

Tachiki, Chie; Nishii, Yasushi; Takaki, Takashi; Sueishi, Kenji

2018-01-01

Surgical orthodontic treatment has been reported to improve oral health-related quality of life (OHRQL). Such treatment comprises three stages: pre-surgical orthodontic treatment; orthognathic surgery; and post-surgical orthodontic treatment. Most studies have focused on change in OHRQL between before and after surgery. However, it is also necessary to evaluate OHRQL at the pre-surgical orthodontic treatment stage, as it may be negatively affected by dental decompensation compared with at pre-treatment. The purpose of this prospective study was to investigate the influence of surgical orthodontic treatment on QOL by assessing change in condition-specific QOL at each stage of treatment in skeletal class III cases. Twenty skeletal class III patients requiring surgical orthodontic treatment were enrolled in the study. Each patient completed the Orthognathic Quality of Life Questionnaire (OQLQ), which was developed for patients with dentofacial deformity. Its items are grouped into 4 domains: "social aspects of dentofacial deformity"; "facial esthetics"; "oral function"; and "awareness of dentofacial esthetics". The questionnaire was completed at the pre-treatment, pre-surgical orthodontic treatment, and post-surgical orthodontic treatment stages. The results revealed a significant worsening in scores between at pre-treatment and pre-surgical orthodontic treatment in the domains of facial esthetics and oral function (ppre-surgical orthodontic and post-surgical orthodontic treatment in all domains except awareness of dentofacial esthetics (ppre-surgical orthodontic treatment stage. Significant correlations were also observed between improvement in upper and lower lip difference, soft tissue pogonion protrusion, and ANB angle and improvement in OQLQ scores at the post-surgical orthodontic treatment stage. These results indicate that morphologic change influences OHRQL in patients undergoing surgical orthodontic treatment not only after surgery, but also during pre

Oral Rehabilitation With Orthognathic Surgery After Dental Implant Placement for Class III Malocclusion With Skeletal Asymmetry and Posterior Bite Collapse.

OpenAIRE

Ohba, Seigo; Nakatani, Yuya; Kawasaki, Takako; Tajima, Nobutaka; Tobita, Takayoshi; Yoshida, Noriaki; Sawase, Takashi; Asahina, Izumi

2015-01-01

Increasing numbers of older patients are seeking orthognathic surgery to treat jaw deformity. However, orthodontic and orthognathic surgical treatment is difficult in cases without occlusal vertical stop. A 55-year-old man presented with Class III malocclusion and mandibular protrusion including esthetic problems and posterior bite collapse. He underwent dental implant treatment to reconstruct an occlusal vertical stop before orthognathic surgery. His occlusal function and esthetic problems i...

25 CFR 291.13 - When do Class III gaming procedures for an Indian tribe become effective?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false When do Class III gaming procedures for an Indian tribe... ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.13 When do Class III gaming procedures for an Indian tribe become effective? Upon approval of Class III gaming procedures for the Indian tribe under either...

Low relative skeletal muscle mass (sarcopenia) in older persons is associated with functional impairment and physical disability.

Science.gov (United States)

Janssen, Ian; Heymsfield, Steven B; Ross, Robert

2002-05-01

To establish the prevalence of sarcopenia in older Americans and to test the hypothesis that sarcopenia is related to functional impairment and physical disability in older persons. Cross-sectional survey. Nationally representative cross-sectional survey using data from the Third National Health and Nutrition Examination Survey (NHANES III). Fourteen thousand eight hundred eighteen adult NHANES III participants aged 18 and older. The presence of sarcopenia and the relationship between sarcopenia and functional impairment and disability were examined in 4,504 adults aged 60 and older. Skeletal muscle mass was estimated from bioimpedance analysis measurements and expressed as skeletal muscle mass index (SMI = skeletal muscle mass/body mass x 100). Subjects were considered to have a normal SMI if their SMI was greater than -one standard deviation above the sex-specific mean for young adults (aged 18-39). Class I sarcopenia was considered present in subjects whose SMI was within -one to -two standard deviations of young adult values, and class II sarcopenia was present in subjects whose SMI was below -two standard deviations of young adult values. The prevalence of class I and class II sarcopenia increased from the third to sixth decades but remained relatively constant thereafter. The prevalence of class I (59% vs 45%) and class II (10% vs 7%) sarcopenia was greater in the older (> or = 60 years) women than in the older men (P normal SMI, respectively. Some of the associations between class II sarcopenia and functional impairment remained significant after adjustment for age, race, body mass index, health behaviors, and comorbidity. Reduced relative skeletal muscle mass in older Americans is a common occurrence that is significantly and independently associated with functional impairment and disability, particularly in older women. These observations provide strong support for the prevailing view that sarcopenia may be an important and potentially reversible cause of

77 FR 48167 - Approved Tribal-State Class III Gaming Compact; Indian Gaming

Science.gov (United States)

2012-08-13

... DEPARTMENT OF THE INTERIOR Bureau of Indian Affairs Approved Tribal--State Class III Gaming Compact; Indian Gaming AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice of Approved Tribal--State Class III Gaming Compact. SUMMARY: This notice publishes an approval of the gaming compact between...

Policy and procedures for classification of Class III groundwater at UMTRA Project sites

International Nuclear Information System (INIS)

1989-03-01

The US Environmental Protection Agency (EPA) has recently proposed groundwater regulations for the US Department of Energy's )DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. These regulations allow the application of supplemental standards at UMTRA Project sites in specific situations. The designation of groundwater as Class III permits the application of supplemental standards. This document discusses a final UMTRA Project policy and procedures for identifying Class III groundwater, including identification of a review area, definition of water quality, quantification of aquifer yield, and identification of methods reasonably employed for public water supply systems. These items, either individually or collectively, need to be investigated in order to determine if groundwaters at UMTRA Project sites are Class III. This document provides a framework for the DOE to determine Class III groundwaters

A benefit-risk assessment of class III antiarrhythmic agents

DEFF Research Database (Denmark)

Brendorp, Bente; Pedersen, Oledyg; Torp-Pedersen, Christian

2002-01-01

, which differentiates them from the others. However, all have potential serious adverse events. Proarrhythmia, especially torsade de pointes, is a common problem making the benefit-risk ratio of these drugs a key question. Class III drugs have been evaluated in different settings: primary and secondary...... prevention of ventricular arrhythmias and in treatment of atrial fibrillation or flutter. Based on existing evidence there is no routine indication for antiarrhythmic drug therapy other than beta-blockers in patients at high risk of sudden death. Subgroup analyses of trials with amiodarone and dofetilide......-intervals or - in the future - from genetic testing. Class III drugs are effective in converting atrial fibrillation to sinus rhythm and for the maintenance of sinus rhythm after conversion. This is currently by far the most important indication for this class of drugs. As defined by recent guidelines, amiodarone...

Combined orthodontic and surgical correction of adult skeletal class II with hyperdivergent jaws.

Science.gov (United States)

Abraham, Jiku; Bagchi, Paulami; Gupta, Swati; Gupta, Hemant; Autar, Ram

2012-01-01

A case of severe Class II skeletal malocclusion with anterior open bite having vertical growth pattern and matching soft tissue profile is presented. Considering age of the patient and the severity of the malocclusion, it was decided to combine orthodontic treatment with surgery. A 0.022 Roth Pre-adjusted Edgewise Appliance was chosen for the orthodontic correction and Le-Fort 1 differential vertical impaction of maxilla with mandibular autorotation and augmentation genioplasty was considered as the treatment plan. The main aim was to reduce the gummy smile and correct the class II profile.

[Pre-surgical orthodontic treatment of skeletal class II patients with gingival smile corrected by anterior maxillary segmental osteotomy].

Science.gov (United States)

Li, Xiaobing; Xiao, Liwei; Chen, Song; Chen, Yangxi

2002-11-01

To discuss the pre-surgical orthodontic treatment of skeletal class II patients with gingiva smile corrected by AMSO. We analyzed the clinical features of 20 skeletal class II patients treated by AMSO combined with Orthodontic treatment and evaluated the effects of AMSO by means of cephalometric analysis. After the AMSO treatment, ANB angle, the height of anterior maxilla, the protrusion of the upper anterior teeth, and the of A point had reduced significantly (P orthodontically to make arch relationship. Extract the upper bicuspid half a year before the surgery was recommended. When necessary, genioplasty could be performed.

Estudo cefalométrico das alterações no perfil facial em pacientes Classe III dolicocefálicos submetidos à cirurgia ortognática bimaxilar Cephalometric study of the facial profile changes in Class III patients submitted to bimaxillary orthognathic surgery

Directory of Open Access Journals (Sweden)

Hewerson Santos Tavares

2005-10-01

Full Text Available O presente estudo avaliou as modificações no perfil facial de 15 pacientes portadores de má oclusão Classe III esquelética que foram submetidos a tratamento ortodôntico pré-cirúrgico e cirurgia ortognática bimaxilar estabilizada com fixação rígida. Oito pacientes foram submetidos à mentoplastia. Foram utilizadas telerradiografias pré-cirúrgicas (T1 e pós-cirúrgicas (T2 com um intervalo mínimo de 6 meses. Foram analisados deslocamentos horizontais e verticais em pontos do tecido ósseo e tecido mole. Foi realizada uma comparação entre os casos tratados com e sem mentoplastia (teste t mostrando não haver diferenças entre os grupos. A regressão linear múltipla evidenciou uma correlação significante no sentido horizontal para os pontos Pg e Pgm e vertical para os pontos Me e Mem. Foi encontrada baixa correlação para movimentos no sentido horizontal nos pontos Sena e A, e para os pontos Pn, Sn e Ph. No sentido vertical, os deslocamentos mais evidentes foram entre os pontos Pg, Gn e Me e Sena e A, porém com correlações de baixa intensidade.The present study evaluated the facial profile modifications in 15 skeletal Class III patients that were submitted to presurgical orthodontic treatment and orthognathic bimaxillary surgery stabilized with a rigid fixation. Eight of the patients have undergone to genioplastic surgery. Presurgical (T1 and late postsurgical (T2 radiographs taken apart with a minimum of 6 month interval had been used. The horizontal and vertical displacement of skeletal and soft tissue profile points were analyzed. The comparison of the cases submitted or not to a genioplastic surgery (t Test showed no differences for the displacement of the skeletal and soft tissue points. The multiple linear regression analysis showed a significant correlation for horizontal movements of the Pg and Pgm points and for vertical movements of the Me and Mem points. A low correlation was found for the horizontal movements of

Inheritance of craniofacial features in Colombian families with class III malocclusion

Directory of Open Access Journals (Sweden)

L Otero

2010-02-01

Full Text Available L Otero, L Quintero, D Champsaur, E SimancaPontificia Universidad Javeriana, Bogotá, ColombiaIntroduction: The inheritance of class III malocclusion has been well documented, but the inheritance of craniofacial structures in Colombian families with this malocclusion has been not yet reported.Patients and methods: The study sample of 25 families comprised 186 untreated orthodontic individuals from 8 to 60 years old. Pedigrees were drawn using Cyrillic software. Complete family histories for each proband were ascertained and the affection status of relatives was confirmed by lateral cephalograms and facial and dental photographs. Analysis of variance and odds ratio test for each parameter was performed to estimate inheritance from parents to offspring and to determine similar phenotypic features in relatives.Results: The analysis of the pedigrees suggests autosomal dominant inheritance. The craniofacial characteristics that showed more resemblance between parents and offspring were middle facial height, shorter anterior cranial base and mandibular prognathism. In contrast the protrusion of upper lip and maxillary retrusion were the phenotypic features that contributed to class III in the majority of families.Conclusion: Knowledge of the inheritance of craniofacial phenotypes in class III malocclusion will enable the design of new therapies to treat this malocclusion.Keywords: inheritance, craniofacial, phenotype, class III malocclusion

Long-term skeletal and dental effects and treatment timing for functional appliances in Class II malocclusion.

Science.gov (United States)

Franchi, Lorenzo; Pavoni, Chiara; Faltin, Kurt; McNamara, James A; Cozza, Paola

2013-03-01

To analyze the long-term skeletal and dentoalveolar effects and to evaluate treatment timing of Class II treatment with functional appliances followed by fixed appliances. A group of 40 patients (22 females and 18 males) with Class II malocclusion consecutively treated either with a Bionator or an Activator followed by fixed appliances was compared with a control group of 20 subjects (9 females and 11 males) with untreated Class II malocclusion. Lateral cephalograms were available at the start of treatment (mean age 10 years), end of treatment with functional appliances (mean age 12 years), and long-term observation (mean age 18.6 years). The treated sample also was divided into two groups according to skeletal maturity. The early-treatment group was composed of 20 subjects (12 females and 8 males) treated before puberty, while the late-treatment group included 20 subjects (10 females and 10 males) treated at puberty. Statistical comparisons were performed with analysis of variance followed by Tukey's post hoc tests. Significant long-term mandibular changes (Co-Gn) in the treated group (3.6 mm over the controls) were associated with improvements in the skeletal sagittal intermaxillary relationship, overjet, and molar relationship (∼3.0-3.5 mm). Treatment during the pubertal peak was able to produce significantly greater increases in total mandibular length (4.3 mm) and mandibular ramus height (3.1 mm) associated with a significant advancement of the bony chin (3.9 mm) when compared with treatment before puberty. Treatment of Class II malocclusion with functional appliances appears to be more effective at puberty.

Abordagem clínica não-cirúrgica no tratamento da má oclusão de Classe III Non-surgical approaches to Class III malocclusions treatment

Directory of Open Access Journals (Sweden)

Eustáquio A. Araújo

2008-12-01

Full Text Available A abordagem clínica não-cirúrgica da Classe III coloca-se entre os grandes desafios da Ortodontia e vem, desde sempre, gerando controvérsia entre clínicos e pesquisadores. Alguns defendem a tese de que o crescimento e o desenvolvimento do complexo craniofacial são determinados geneticamente e, portanto, inalteráveis. Para esses, a correção da grande maioria de casos de Classe III passará por intervenções orto-cirúrgicas, devendo a terapia ser realizada assim que cessar o período mais ativo do crescimento. Por outro lado, há aqueles que, mesmo concordando com o peso da hereditariedade na etiologia da Classe III, acreditam ser possível modificar o padrão e a direção do crescimento e, através de uma abordagem não-cirúrgica, minimizar a má oclusão ou até mesmo tratá-la com sucesso. Em face da controvérsia, quais seriam as possibilidades ortodônticas? Inúmeros são os relatos de que uma intervenção adequada, em momento adequado, acompanhada de um estudo do padrão familiar, pode, muitas vezes, minimizar o desenvolvimento de uma Classe III. Procedimentos selecionados com critério podem reduzir a indicação de intervenções cirúrgicas e proporcionar resultados positivos e duradouros. Há evidências clínicas e científicas de que algumas decisões terapêuticas podem mudar o curso de muitos prognósticos sombrios.Orthodontic management of the Class III malocclusion has been a constant challenge to the orthodontic profession and remains a controversial issue among clinicians and researches. Some support the belief that growth and size of the craniofacial complex are genetically predetermined and cannot be changed. They assume that the great majority of Class III cases are "untreatable" and that they are due to surgical intervention after growth has been completed. Even agreeing that heredity plays a major role in this type os deviation, others support the contention that the pattern and direction of growth can be

Treatment of Class III malocclusion: the key role of the occlusal plane.

Science.gov (United States)

Raymond, Jean-Louis; Matern, Olivier; Grollemund, Bruno; Bacon, William

2010-01-01

Patients with a Class III malocclusion generally present with a counterclockwise inclination of the occlusal plane, converging with Camper's line towards the front. This slope has an effect on mandibular movement (forward posture) and on chewing mechanisms in general. As dysfunctional mastication is likely to influence facial growth and inter-arch stability negatively, early orthopedic therapy of the occlusal unbalance concurrent with Class III malocclusion is justified. The aim of this article is to present a method of Class III treatment based on a correct re-orientation of the occlusal plane in order to achieve an optimal masticatory mechanism, essential for stability of early treatment outcomes. Copyright © 2010 Società Italiana di Ortodonzia (SIDO). Published by Elsevier Srl. All rights reserved.

The Effect of Excipients on the Permeability of BCS Class III Compounds and Implications for Biowaivers.

Science.gov (United States)

Parr, Alan; Hidalgo, Ismael J; Bode, Chris; Brown, William; Yazdanian, Mehran; Gonzalez, Mario A; Sagawa, Kazuko; Miller, Kevin; Jiang, Wenlei; Stippler, Erika S

2016-01-01

Currently, the FDA allows biowaivers for Class I (high solubility and high permeability) and Class III (high solubility and low permeability) compounds of the Biopharmaceutics Classification System (BCS). Scientific evidence should be provided to support biowaivers for BCS Class I and Class III (high solubility and low permeability) compounds. Data on the effects of excipients on drug permeability are needed to demonstrate that commonly used excipients do not affect the permeability of BCS Class III compounds, which would support the application of biowaivers to Class III compounds. This study was designed to generate such data by assessing the permeability of four BCS Class III compounds and one Class I compound in the presence and absence of five commonly used excipients. The permeability of each of the compounds was assessed, at three to five concentrations, with each excipient in two different models: Caco-2 cell monolayers, and in situ rat intestinal perfusion. No substantial increases in the permeability of any of the compounds were observed in the presence of any of the tested excipients in either of the models, with the exception of disruption of Caco-2 cell monolayer integrity by sodium lauryl sulfate at 0.1 mg/ml and higher. The results suggest that the absorption of these four BCS Class III compounds would not be greatly affected by the tested excipients. This may have implications in supporting biowaivers for BCS Class III compounds in general.

A roentgenocephalometric study on the condylar displacement in angle's class I and III malocclusion

International Nuclear Information System (INIS)

Lee, Jeong Hwa; Park, Chang Seo

1986-01-01

The purpose of this investigation was to know correlation of mean values between centric occlusion and centric relation by the cephalogram in Angle's Class I and III malocclusion subjects. 22 adults with Angle's Class I malocclusion (17 men and 5 women, 21 to 27 years of age) and 14 adult with Angle's class III malocclusion (10 men and 4 women, 21 to 27 years of age) were selected form the dental students in Yonsei University. Each subject was given two lateral cephalometric radiographics and cephalometric analysis was performed. All data form these analyses was recorded and statistically processed with CYBER computer system. The results were obtained as follows: 1. There was a strong positive correlation between centric occlusion and centric relation in all subjects with Angle's Class I and III malocclusion. 2. In Angle's Class I malocclusion, measurements in lower facial height revealed significant difference between centric occlusion and centric relation (p<0.05). 3.When the mandible was movement was 1.27 mm (0.2-2.8 mm) in Angle's Class I malocclusion, 1.70 mm(0.55-4.15 mm) in Angle's Class III malocclusion, and 1.44 mm (0.2- 4.15 mm) in all subjects.

Comparison of temporomandibular joint and ramus morphology between class II and class III cases before and after bi-maxillary osteotomy.

Science.gov (United States)

Iguchi, Ran; Yoshizawa, Kunio; Moroi, Akinori; Tsutsui, Takamitsu; Hotta, Asami; Hiraide, Ryota; Takayama, Akihiro; Tsunoda, Tatsuya; Saito, Yuki; Sato, Momoko; Baba, Nana; Ueki, Koichiro

2017-12-01

The purpose of this study was to compare changes in temporomandibular joint (TMJ) and ramus morphology between class II and III cases before and after sagittal split ramus osteotomy (SSRO) and Le Fort I osteotomy. The subjects were 39 patients (78 sides) who underwent bi-maxillary surgery. They consisted of 2 groups (18 class II cases and 21 class III cases), and were selected randomly from among patients who underwent surgery between 2012 and 2016. The TMJ disc tissue and joint effusion were assessed by magnetic resonance imaging (MRI) and the TMJ space, condylar height, ramus height, ramus inclination and condylar square were assessed by computed tomography (CT), pre- and post-operatively. The number of joints with anterior disc displacement in class II was significantly higher than that in class III (p bi-maxillary surgery. The findings of the numerical analysis also demonstrated that reduction of condylar volume occurred frequently in class II, although TMJ disc position classification did not change significantly, as previously reported. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Ca2+ sensitizers: An emerging class of agents for counterbalancing weakness in skeletal muscle diseases?

Science.gov (United States)

Ochala, Julien

2010-02-01

Ca(2+) ions are key regulators of skeletal muscle contraction. By binding to contractile proteins, they initiate a cascade of molecular events leading to cross-bridge formation and ultimately, muscle shortening and force production. The ability of contractile proteins to respond to Ca(2+) attachment, also known as Ca(2+) sensitivity, is often compromised in acquired and congenital skeletal muscle disorders. It constitutes, undoubtedly, a major physiological cause of weakness for patients. In this review, we discuss recent studies giving strong molecular and cellular evidence that pharmacological modulators of some of the contractile proteins, also termed Ca(2+) sensitizers, are efficient agents to improve Ca(2+) sensitivity and function in diseased skeletal muscle cells. In fact, they compensate for the impaired contractile proteins response to Ca(2+) binding. Currently, such Ca(2+) sensitizing compounds are successfully used for reducing problems in cardiac disorders. Therefore, in the future, under certain conditions, these agents may represent an emerging class of agents to enhance the quality of life of patients suffering from skeletal muscle weakness. Copyright 2009 Elsevier B.V. All rights reserved.

Components of soft tissue deformations in subjects with untreated angle's Class III malocclusions: thin-plate spline analysis.

Science.gov (United States)

Singh, G D; McNamara, J A; Lozanoff, S

1998-01-01

While the dynamics of maxillo-mandibular allometry associated with treatment modalities available for the management of Class III malocclusions currently are under investigation, developmental aberration of the soft tissues in untreated Class III malocclusions requires specification. In this study, lateral cephalographs of 124 prepubertal European-American children (71 with untreated Class III malocclusion; 53 with Class I occlusion) were traced, and 12 soft-tissue landmarks digitized. Resultant geometries were scaled to an equivalent size and mean Class III and Class I configurations compared. Procrustes analysis established statistical difference (P thin-plate spline (TPS) analysis indicated that both affine and non-affine transformations contribute towards the deformation (total spline) of the averaged Class III soft tissue configuration. For non-affine transformations, partial warp 8 had the highest magnitude, indicating large-scale deformations visualized as a combination of columellar retrusion and lower labial protrusion. In addition, partial warp 5 also had a high magnitude, demonstrating upper labial vertical compression with antero-inferior elongation of the lower labio-mental soft tissue complex. Thus, children with Class III malocclusions demonstrate antero-posterior and vertical deformations of the maxillary soft tissue complex in combination with antero-inferior mandibular soft tissue elongation. This pattern of deformations may represent gene-environment interactions, resulting in Class III malocclusions with characteristic phenotypes, that are amenable to orthodontic and dentofacial orthopedic manipulations.

Minimally invasive monitoring of skeletal muscle hypermetabolism induced by the phosphodiesterase-III-inhibitor milrinone and sodium fluoride.

Science.gov (United States)

Schuster, Frank; Johannsen, Stephan; Roewer, Norbert; Anetseder, Martin

2013-04-01

We hypothesized that the phosphodiesterase-III-inhibitor milrinone and the non-specific G-protein activator sodium fluoride increase the skeletal muscular lactate levels as a sign of a hypermetabolic response. With approval of the local animal care committee Sprague-Dawley rats were killed and artificially perfused either with Ringer's solution or sodium fluoride 110 mM, while milrinone 1.32 mM or Ringer's solution at 1 μl/min was applied via microdialysis probes in both hind limbs. Lactate was measured spectrophotometrically in the dialysate. Baseline lactate levels before drug application did not differ between hind limbs. Local infusion of milrinone via microdialysis did not significantly increase intramuscular lactate concentrations compared with the Ringer control group. Muscular perfusion with sodium fluoride resulted in a significant increase of lactate and was potentiated by combination with local milrinone. Phosphodiesterase-III-inhibition alone does not significantly influence the lactate levels in skeletal muscle of sacrificed rats. Sodium fluoride infusion leads to an intramuscular lactate increase, which was further potentiated by local inhibition of phosphodiesterase-III. The fluoride-mediated hypermetabolic response following sodium fluoride could be a possible explanation for the observed myotoxic adverse effects in individuals treated by fluoride-containing agents. © 2012 The Authors. JPP © 2012. Royal Pharmaceutical Society.

25 CFR 291.3 - When may an Indian tribe ask the Secretary to issue Class III gaming procedures?

Science.gov (United States)

2010-04-01

... III gaming procedures? 291.3 Section 291.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.3 When may an Indian tribe ask the Secretary to issue Class III gaming procedures? An Indian tribe may ask the Secretary to issue Class III...

25 CFR 291.12 - Who will monitor and enforce tribal compliance with the Class III gaming procedures?

Science.gov (United States)

2010-04-01

... Class III gaming procedures? 291.12 Section 291.12 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.12 Who will monitor and enforce tribal compliance with the Class III gaming procedures? The Indian tribe and the State may have an agreement...

Thin-plate spline analysis of the cranial base in subjects with Class III malocclusion.

Science.gov (United States)

Singh, G D; McNamara, J A; Lozanoff, S

1997-08-01

The role of the cranial base in the emergence of Class III malocclusion is not fully understood. This study determines deformations that contribute to a Class III cranial base morphology, employing thin-plate spline analysis on lateral cephalographs. A total of 73 children of European-American descent aged between 5 and 11 years of age with Class III malocclusion were compared with an equivalent group of subjects with a normal, untreated, Class I molar occlusion. The cephalographs were traced, checked and subdivided into seven age- and sex-matched groups. Thirteen points on the cranial base were identified and digitized. The datasets were scaled to an equivalent size, and statistical analysis indicated significant differences between average Class I and Class III cranial base morphologies for each group. Thin-plate spline analysis indicated that both affine (uniform) and non-affine transformations contribute toward the total spline for each average cranial base morphology at each age group analysed. For non-affine transformations, Partial warps 10, 8 and 7 had high magnitudes, indicating large-scale deformations affecting Bolton point, basion, pterygo-maxillare, Ricketts' point and articulare. In contrast, high eigenvalues associated with Partial warps 1-3, indicating localized shape changes, were found at tuberculum sellae, sella, and the frontonasomaxillary suture. It is concluded that large spatial-scale deformations affect the occipital complex of the cranial base and sphenoidal region, in combination with localized distortions at the frontonasal suture. These deformations may contribute to reduced orthocephalization or deficient flattening of the cranial base antero-posteriorly that, in turn, leads to the formation of a Class III malocclusion.

Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions.

Science.gov (United States)

Fraga, Marcelo Reis; Rodrigues, Andréia Fialho; Ribeiro, Luiz Claudio; Campos, Marcio José da Silva; Vitral, Robert Willer Farinazzo

2013-10-29

The present study aimed to determine and compare the anteroposterior position of the condyle in the mandibular fossa between groups of asymptomatic subjects with normal occlusion and asymptomatic subjects with Class I, Class II Division 1, and Class III malocclusions. Thirty persons with normal occlusion, 30 with Class I malocclusion, 30 with Class II Division 1, and 30 with Class III had computed tomography scans of their temporomandibular joints. The anterior joint space/posterior joint space (AJS/PJS) ratio was determined for the right and left joints. The paired t test was used to analyze the AJS/PJS ratio between both sides for each group. The ANOVA test was applied to verify the differences between the groups for the measurements of the right and left sides. In case the ANOVA test confirmed significance, the Dunnett's t test was performed to compare the groups of malocclusion with that of normal occlusion. The paired t test between the AJS/PJS relationships in the right and left sides showed the following p values: Class I (0.168), Class II Division 1 (0.662), Class III (0.991), and normal occlusion (0.390). The ANOVA test showed a p value of 0.445 for the comparisons of the right side and 0.040 for the left side. The Dunnett's t test demonstrated a statistically significant difference between the Class II group and the normal occlusion group (p value of 0.026) in the joints of the left side. Bilateral symmetry and lack of condyle centralization were common characteristics among all groups. The greatest condylar decentralization was observed in the Class II group, whereas the least condylar decentralization was found in the normal occlusion group.

Regulation of MIR165/166 by class II and class III homeodomain leucine zipper proteins establishes leaf polarity

DEFF Research Database (Denmark)

Merelo, Paz; Ram, Hathi; Caggiano, Monica Pia

2016-01-01

A defining feature of plant leaves is their flattened shape. This shape depends on an antagonism between the genes that specify adaxial (top) and abaxial (bottom) tissue identity; however, the molecular nature of this antagonism remains poorly understood. Class III homeodomain leucine zipper (HD-...... show that class III and class II HD-ZIP proteins act together to repress MIR165/166 via a conserved cis-element in their promoters. Organ morphology and tissue patterning in plants, therefore, depend on a bidirectional repressive circuit involving a set of miRNAs and its targets....

Class III treatment using facial mask: Stability after 10 years

Directory of Open Access Journals (Sweden)

Adilson Luiz Ramos

2014-10-01

Full Text Available Early Class III malocclusion treatment may not have long-term stability due to mandibular growth. Although some features of this malocclusion point to a better prognosis, it is practically impossible for the orthodontist to foresee cases that require new intervention. Many patients need retreatment, whether compensatory or orthodontic-surgical. The present study reports the case of a Class III patient treated at the end of the mixed dentition with the use of a face mask followed by conventional fixed appliances. The case remains stable 10 years after treatment completion. It was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

Class III orthognathic surgical cases facilitated by accelerated osteogenic orthodontics: a preliminary report.

Science.gov (United States)

Wu, JiaQi; Xu, Li; Liang, Cheng; Jiang, JiuHui

2015-11-01

To describe a multidisciplinary treatment approach that includes corticotomy, orthodontic force and orthognathic surgery for the management of skeletal Class III surgical cases. The main advantage of the combined techniques is a reduction in treatment time for young adult patients. Accelerated Osteogenic Orthodontics (AOO) was delivered to three young adult patients during their pre-surgical orthodontic treatment. After aligning and levelling the dental arches, a piezosurgical corticotomy was performed to the buccal aspect of the alveolar bone. Bone graft materials were used to cover the decorticated area and soft tissue flaps were replaced. The mean time for extraction space closure was 5.4 ± 1.3 months and the mean time for pre-surgical orthodontic treatment was 12.0 ± 0.9 months. The average total treatment time was 20.4 ± 2.4 months. A pre-existing bony fenestration in the buccal cortex adjacent to the right lateral incisor root apex of Case 1 was corrected. The facial aesthetics of three patients improved following multidisciplinary treatment. This approach may be an efficient method for the orthognathic patient who desires a reduced treatment time, but further clinical research is required.

A new modified tandem appliance for management of developing Class III malocclusion

OpenAIRE

Sukh, Ram; Singh, Gyan P; Tandon, Pradeep

2013-01-01

Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior...

Factors influencing orthodontic treatment time for non-surgical Class III malocclusion

Directory of Open Access Journals (Sweden)

Lívia Monteiro Bichara

Full Text Available ABSTRACT To improve orthodontic treatment efficiency, orthodontists must know which variables could interfere with orthodontic treatment time. Objective: To identify variables and their effect size on orthodontic treatment time of Class III malocclusion. Material and Methods: Forty-five Class III malocclusion cases were selected from 2008 patients’ records. Clinical charts, cephalometric radiographs, and pre and posttreatment dental casts were evaluated. Age, sex, PAR index at T1 and T2, overjet, missing teeth, extractions, number of treatment phases, missed appointments, appliance breakages, and cephalometric variables SNA, SNB, ANB, Wits, SnGoGn, CoA, CoGn, IMPA, 1.PP were investigated by multiple linear regression analysis and stepwise method at p2 (patients who missed more than 2 appointments, to detect the influence of this data on treatment time and the quality of the treatment (PAR T2. Results: Average treatment time was 30.27 months. Multiple regression analysis showed that missed appointment (R2=0.4345 and appliance breakages (R2=0.0596 are the only variables able to significantly predict treatment duration. Treatment time for patients who missed more than 2 appointments was nearly one year longer. However, no significant influence on PAR T2 was observed for those patients. Conclusion: Orthodontic treatment duration in Class III patients is mainly influenced by factors related to patient compliance. Patients who missed more appointments did not show worse orthodontic finishing, but longer treatment. No occlusal, cephalometric, or demographic variable obtained before treatment was able to give some significant prediction about treatment time in Class III patients.

Surgical Orthodontic Treatment of Severe Skeletal Class II

Science.gov (United States)

Alsulaimani, Fahad F.; Al-Sebaei, Maisa O.; Afify, Ahmed R.

2013-01-01

This paper describes an adult Saudi male patient who presented with a severe skeletal class II deformity. The case was managed with a combination of presurgical orthodontic treatment followed by a double jaw orthognathic surgery and then another phase of orthodontic treatment for final occlusal detailing. Extraction of the four first premolars was done during the presurgical orthodontic phase of treatment to decompensate upper and lower incisors and to give room for surgical setback of the maxillary anterior segment. Double jaw surgery was performed: bilateral sagittal split ramus osteotomy for 8 mm mandibular advancement combined with three-piece Le Fort I maxillary osteotomy, 6 mm setback of the anterior segment, 8 mm impaction of the maxilla, and 5 mm advancement genioplasty. Although the anteroposterior discrepancy and the facial convexity were so severe, highly acceptable results were obtained, both esthetically as well as occlusally. PMID:23573428

Pseudo Class III malocclusion

Directory of Open Access Journals (Sweden)

Fadia M. Al-Hummayani

2016-04-01

Full Text Available The treatment of deep anterior crossbite is technically challenging due to the difficulty of placing traditional brackets with fixed appliances. This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors. Treatment was carried out in 2 phases. Phase I treatment was performed by removable appliance “modified Hawley appliance with inverted labial bow,” some modifications were carried out to it to suit the presented case. Positive overbite and overjet was accomplished in one month, in this phase with minimal forces exerted on the lower incisors. Whereas, phase II treatment was performed with fixed appliances (braces to align teeth and have proper over bite and overjet and to close posterior open bite, this phase was accomplished within 11 month.

Base of the skull morphology and Class III malocclusion in patients with unilateral cleft lip and palate

Directory of Open Access Journals (Sweden)

Mariana Maciel Tinano

2015-02-01

Full Text Available OBJECTIVE: The aim of the present study was to determine the morphological differences in the base of the skull of individuals with cleft lip and palate and Class III malocclusion in comparison to control groups with Class I and Class III malocclusion. METHODS: A total of 89 individuals (males and females aged between 5 and 27 years old (Class I, n = 32; Class III, n = 29; and Class III individuals with unilateral cleft lip and palate, n = 28 attending PUC-MG Dental Center and Cleft Lip/Palate Care Center of Baleia Hospital and PUC-MG (CENTRARE were selected. Linear and angular measurements of the base of the skull, maxilla and mandible were performed and assessed by a single calibrated examiner by means of cephalometric radiographs. Statistical analysis involved ANCOVA and Bonferroni correction. RESULTS: No significant differences with regard to the base of the skull were found between the control group (Class I and individuals with cleft lip and palate (P > 0.017. The cleft lip/palate group differed from the Class III group only with regard to CI.Sp.Ba (P = 0.015. Individuals with cleft lip and palate had a significantly shorter maxillary length (Co-A in comparison to the control group (P < 0.001. No significant differences were found in the mandible (Co-Gn of the control group and individuals with cleft lip and palate (P = 1.000. CONCLUSION: The present findings suggest that there are no significant differences in the base of the skull of individuals Class I or Class III and individuals with cleft lip and palate and Class III malocclusion.

Guide to preemption of state-law claims against Class III PMA medical devices.

Science.gov (United States)

Whitney, Daniel W

2010-01-01

There is a perception that the express preemption holding of the Supreme Court in Riegel v. Medtronic, 552 U.S. 312(2008), immunizes medical device manufacturers from common law personal injury actions involving Class III devices that received FDA clearance under a premarket approval application (PMA). In the aftermath of Riegel, many lawsuits involving Class III PMA devices have been dismissed by district courts applying the new heightened pleading standard of Bell Atlantic Corp. v. Twombly, 550 U.S. 544 (2007). Other lawsuits involving Class III PMA devices premised on fraud-on-FDA have been dismissed based on the implied preemption holding of the Supreme Court in Buckman v. Plaintiffs' Legal Comm., 531 U.S. 341 (2001). When these decisions are carefully analyzed together with Medtronic, Inc. v. Lohr, 518 U.S. 470 (1996), which found no preemption regarding a Class III device receiving FDA clearance through the 510(k) mechanism, it is apparent that the preemption defense does not apply universally to Class III PMA devices. The overall methodology for framing a non-preempted claim is to first identify conduct which violated the PMA or other specific requirements related to safety or efficacy. If such conduct can also be stated in terms of a breach of a parallel common law duty (e.g, failure to warn under strict liability or negligence, manufacturing defect or breach of warranty), then it would appear the claim is not preempted. Alternatively, regardless of a specific violation, common law remedies are not preempted by general CGMP requirements.

[Cephalometric analysis in cases with Class III malocclusions].

Science.gov (United States)

Rak, D

1989-01-01

Various orthodontic class III anomalies, classified into several experimental groups, and eugnathic occlusions serving as controls were studied by roentgencephalometry. The objective of the study was to detect possible distinctions in the quantitative values of two variables chosen and to select the variables which most significantly discriminate the group of class III orthodontic anomalies. Attempts were made to ascertain whether or not there were sex-related differences. The teleroentgenograms of 269 examines, aged 10-18 years, of both sexes were analyzed. The experimental group consisted of 89 examinees class III orthodontic anomalies. The control group consisted of 180 examines with eugnathic occlusion. Latero-lateral skull roentgenograms were taken observing the rules of roentgenocephalometry. Using acetate paper, the drawings of profile teleroentgenograms were elaborated and the reference points and lines were entered. A total of 38 variables were analyzed, of which there were 10 linear, 19 angular, and 8 variables were obtained by mathematical calculation; the age variable was also analyzed. In statistical analyses an electronic computer was used. The results are presented in tables and graphs. The results obtained showed that: --compared to the findings in the control group, the subjects in the experimental group displayed significant changes in the following craniofacial characteristics a negative difference in the position of the apical base of the jaw, manifest concavity of the osseous profile and diminished convexity of the profile of soft parts, retroinclination of the lower incisors, mandibular prognathism, increased mandibular angle and increased mandibular proportion compared to maxillary and the anterior cranial base; --with regard to the sex of the examinees, only four linear variables of significantly discriminating character were selected, so that in can be concluded that there were no significant sex differences among the morphological

A three-dimensional soft tissue analysis of Class III malocclusion: a case-controlled cross-sectional study.

Science.gov (United States)

Johal, Ama; Chaggar, Amrit; Zou, Li Fong

2018-03-01

The present study used the optical surface laser scanning technique to compare the facial features of patients aged 8-18 years presenting with Class I and Class III incisor relationship in a case-control design. Subjects with a Class III incisor relationship, aged 8-18 years, were age and gender matched with Class I control and underwent a 3-dimensional (3-D) optical surface scan of the facial soft tissues. Landmark analysis revealed Class III subjects displayed greater mean dimensions compared to the control group most notably between the ages of 8-10 and 17-18 years in both males and females, in respect of antero-posterior (P = 0.01) and vertical (P = 0.006) facial dimensions. Surface-based analysis, revealed the greatest difference in the lower facial region, followed by the mid-face, whilst the upper face remained fairly consistent. Significant detectable differences were found in the surface facial features of developing Class III subjects.

Management of skeletal class III malocclusion with a palatally impacted cuspid

Directory of Open Access Journals (Sweden)

Chris HN Chang

2012-01-01

Maintain the A-P position of the maxilla.Extrude lower molars to open the VDO by clockwise rotation to effectively retract the mandible relative to the maxilla.Retract the mandibular incisors.Correct the anterior X-bite and align the midlinesEstablish a normal overjet and overbite in a mutually protected, Class I occlusion.Retract lower lip to improve facial balance 0.022-in Damon D3® (standard torque and Inspire Ice® brackets ( Ormco were used. The simplicity of mechanics is illustrated

Expression of a cucumber class III chitinase and Nicotiana plumbaginifolia class I glucanase genes in transgenic potato plants

NARCIS (Netherlands)

Moravcikova, J.; Matusikova, I.; Libantova, J.; Bauer, M.; Mlynarova, L.

2004-01-01

The genes encoding for a cucumber class III chitinase and Nicotiana plumbaginifolia class I glucanase were co-introduced into Slovak potato (Solanum tuberosum L.) breeding line 116/86 using Agrobacterium tumefaciens. For both transgenes the number of integrated copies and level of RNA expression

Forecasting craniofacial growth in individuals with class III malocclusion by computational modelling.

Science.gov (United States)

Auconi, Pietro; Scazzocchio, Marco; Defraia, Efisio; McNamara, James A; Franchi, Lorenzo

2014-04-01

To develop a mathematical model that adequately represented the pattern of craniofacial growth in class III subject consistently, with the goal of using this information to make growth predictions that could be amenable to longitudinal verification and clinical use. A combination of computational techniques (i.e. Fuzzy clustering and Network analysis) was applied to cephalometric data derived from 429 untreated growing female patients with class III malocclusion to visualize craniofacial growth dynamics and correlations. Four age groups of subjects were examined individually: from 7 to 9 years of age, from 10 to 12 years, from 13 to 14 years, and from 15 to 17 years. The connections between pathway components of class III craniofacial growth can be visualized from Network profiles. Fuzzy clustering analysis was able to define further growth patterns and coherences of the traditionally reported dentoskeletal characteristics of this structural imbalance. Craniofacial growth can be visualized as a biological, space-constraint-based optimization process; the prediction of individual growth trajectories depends on the rate of membership to a specific 'winner' cluster, i.e. on a specific individual growth strategy. The reliability of the information thus gained was tested to forecast craniofacial growth of 28 untreated female class III subjects followed longitudinally. The combination of Fuzzy clustering and Network algorithms allowed the development of principles for combining multiple auxological cephalometric features into a joint global model and to predict the individual risk of the facial pattern imbalance during growth.

Professionals' and laypersons' appreciation of various options for Class III surgical correction.

Science.gov (United States)

Fabré, M; Mossaz, C; Christou, P; Kiliaridis, S

2010-08-01

The objectives of this study were to evaluate the assessments of maxillofacial surgeons, orthodontists, and laypersons on the predicted aesthetic outcome of various surgical options in Class III correction and the associations between certain initial cephalometric values and the judges' preferred option. Pre-surgical lateral headfilms and coloured profile photographs of 18 skeletal Class III Caucasian adult patients (10 males and 8 females) with a mean age of 24.5 years were used. The headfilms were hand traced and digitized. Conventional cephalometric analysis was performed. Computerized predictions of three surgical options, mandibular setback, Le Fort I advancement, and bimaxillary surgery, were made. For each case, the pre-surgical profile photograph with the three predictions was presented on a printed page. The questionnaire was sent to 51 maxillofacial surgeons (response rate 45.1 per cent), 78 orthodontists (response rate 71.8 per cent), and 61 laypersons (response rate 100 per cent) to aesthetically evaluate the pre-surgical photographs and the surgical predictions by placing a mark along a 10-graded visual analogue scale (VAS) using a standard profile for calibration. Confidence interval was calculated for each patient. An independent samples t-test was used to detect initial cephalometric values associated with the judges' preferred option and analysis of variance/Tukey's honestly significant differences to evaluate differences between judges. Intra-observer reliability was assessed with a paired t-test. All treatment predictions led to improved scoring of facial aesthetics with the exception of the setback option for three patients. For 14 patients, general agreement for the preferred option existed between the three groups of judges. Laypersons tended to give lower improvement scores than professionals. Overjet, nasofacial, and nasomental angles were important in decision making between the mandibular setback and Le Fort I options (the more negative

Dental compensation for skeletal Class III malocclusion by isolated extraction of mandibular teeth. Part 1: Occlusal situation 12 years after completion of active treatment.

Science.gov (United States)

Zimmer, Bernd; Schenk-Kazan, Sarah

2015-05-01

The purpose of this work was to statistically evaluate the outcomes achieved by isolated extraction of mandibular teeth (second premolars or first molars) for Class III compensation. Part A of the study dealt with the quality of outcomes at the end of active treatment, using weighted Peer Assessment Rating (PAR) scores determined on the basis of casts for 25 (14 female and 11 male) consecutive patients aged 16 ± 1.7 years at the time of debonding. These results were compared to the scores in a randomly selected control group of 25 (14 female and 11 male) patients who were 14.7 ± 1.9 years old at debonding. Part B evaluated the long-term stability of the outcomes based on 12 (all of them female) patients available for examination after a mean of 11.8 years. The mean weighted PAR scores obtained in both study parts were analyzed for statistical differences using a two-tailed paired Student's t-test at a significance level of p ≤ 0.05. Mean weighted PAR scores of 4.76 ± 3.94 and 3.92 ± 3.44 were obtained in the Class III extraction group and the control group, respectively, at the end of active treatment. This difference was not significant (p = 0.49). Among the 12 longitudinal patients, the mean score increased from 4 ± 3.46 at debonding to 6.25 ± 3.67 by the end of the 11.8-year follow-up period. This difference was significant (p = 0.0008). Treatment of Class III anomalies by isolated extraction of lower premolars or molars can yield PAR scores similar to those achieved by standard therapies. These scores, while increasing significantly, remained at a clinically acceptable level over 11.8 years. Hence this treatment modality--intended for cases that border on requiring orthognathic surgery--may also be recommended from a long-term point of view.

Load Flow and Short Circuit Analysis of the Class III Power System of HANARO

Energy Technology Data Exchange (ETDEWEB)

Kim, H. K.; Jung, H. S

2005-12-15

The planning, design, and operation of electric power system require engineering studies to assist in the evaluation of the system performance, reliability, safety and economics. The Class III power of HANARO supplies power for not only HANARO but also RIPF and IMEF. The starting current of most ac motors is five to ten times normal full load current. The loads of the Class III power are connected in consecutive orders at an interval for 10 seconds to avoid excessive voltage drop. This technical report deals with the load flow study and motor starting study for the Class III power of HANARO using ETAP(Electrical Transient Analyzer Program) to verify the capacity of the diesel generator. Short-circuit studies are done to determine the magnitude of the prospective currents flowing throughout the power system at various time intervals after a fault occurs. Short-circuit studies can be performed at the planning stage in order to help finalize the system layout, determine voltage levels, and size cables, transformers, and conductors. From this study, we verify the short circuit current capacity of air circuit breaker(ACB) and automatic transfer switch(ATS) of the Class III power.

The Effect of Excipients on the Permeability of BCS Class III Compounds and Implications for Biowaivers

OpenAIRE

Parr, Alan; Hidalgo, Ismael J.; Bode, Chris; Brown, William; Yazdanian, Mehran; Gonzalez, Mario A.; Sagawa, Kazuko; Miller, Kevin; Jiang, Wenlei; Stippler, Erika S.

2015-01-01

Purpose Currently, the FDA allows biowaivers for Class I (high solubility and high permeability) and Class III (high solubility and low permeability) compounds of the Biopharmaceutics Classification System (BCS). Scientific evidence should be provided to support biowaivers for BCS Class I and Class III (high solubility and low permeability) compounds. Methods Data on the effects of excipients on drug permeability are needed to demonstrate that commonly used excipients do not affect the permea...

Comparative Study of Skeletal Stability between Postoperative Skeletal Intermaxillary Fixation and No Skeletal Fixation after Bilateral Sagittal Split Ramus Osteotomy

DEFF Research Database (Denmark)

Hartlev, Jens; Godtfredsen, Erik; Andersen, Niels Trolle

2014-01-01

OBJECTIVES: The purpose of the present study was to evaluate skeletal stability after mandibular advancement with bilateral sagittal split osteotomy. MATERIAL AND METHODS: Twenty-six patients underwent single-jaw bilateral sagittal split osteotomy (BSSO) to correct skeletal Class II malocclusion....

Social class-related gradient in the association of skeletal growth with blood pressure among adolescent boys in India.

Science.gov (United States)

Rao, Shobha; Apte, Priti

2009-12-01

In view of the fact that height differences between socio-economic groups are apparent early in childhood, it is of interest to examine whether skeletal growth is reflective of the social class gradient in CVD risk. The present study examined blood pressure levels, adiposity and growth of adolescent boys from high and low social classes. In a cross-sectional study, skeletal growth (height and sitting height), adiposity (weight, BMI and body fat) and blood pressure levels of the adolescents were measured. Pune, India. Adolescent schoolboys (9-16 years) from high socio-economic (HSE; n 1146) and low socio-economic (LSE; n 932) class. LSE boys were thin, short and undernourished (mean BMI: 15.5 kg/m2 v. 19.3 kg/m2 in HSE boys, P = 0.00). Social gradient was revealed in differing health risks. The prevalence of high systolic blood pressure (HSBP) was high in HSE class (10.5 % v. 2.7 % in LSE class, P = 0.00) and was associated with adiposity, while the prevalence of high diastolic blood pressure (HDBP) was high in LSE class (9.8 % v. 7.0 % in HSE class, P = 0.00) and had only a weak association with adiposity. Despite this, lower ratio of leg length to height was associated with significantly higher respective health risks, i.e. for HDBP in LSE class (OR = 1.99, 95 % CI 1.14, 3.47) and for HSBP in HSE class (OR = 1.69, 95 % CI 1.02, 2.77). As stunting in childhood is a major problem in India and Asia, the leg length to height indicator needs to be validated in different populations to understand CVD risks.

Proteomics computational analyses suggest that baculovirus GP64 superfamily proteins are class III penetrenes

Directory of Open Access Journals (Sweden)

Garry Robert F

2008-02-01

Full Text Available Abstract Background Members of the Baculoviridae encode two types of proteins that mediate virus:cell membrane fusion and penetration into the host cell. Alignments of primary amino acid sequences indicate that baculovirus fusion proteins of group I nucleopolyhedroviruses (NPV form the GP64 superfamily. The structure of these viral penetrenes has not been determined. The GP64 superfamily includes the glycoprotein (GP encoded by members of the Thogotovirus genus of the Orthomyxoviridae. The entry proteins of other baculoviruses, group II NPV and granuloviruses, are class I penetrenes. Results Class III penetrenes encoded by members of the Rhabdoviridae and Herpesviridae have an internal fusion domain comprised of beta sheets, other beta sheet domains, an extended alpha helical domain, a membrane proximal stem domain and a carboxyl terminal anchor. Similar sequences and structural/functional motifs that characterize class III penetrenes are located collinearly in GP64 of group I baculoviruses and related glycoproteins encoded by thogotoviruses. Structural models based on a prototypic class III penetrene, vesicular stomatitis virus glycoprotein (VSV G, were established for Thogoto virus (THOV GP and Autographa california multiple NPV (AcMNPV GP64 demonstrating feasible cysteine linkages. Glycosylation sites in THOV GP and AcMNPV GP64 appear in similar model locations to the two glycosylation sites of VSV G. Conclusion These results suggest that proteins in the GP64 superfamily are class III penetrenes.

The Use of Invisalign® System in the Management of the Orthodontic Treatment before and after Class III Surgical Approach.

Science.gov (United States)

Pagani, Renato; Signorino, Fabrizio; Poli, Pier Paolo; Manzini, Pietro; Panisi, Irene

2016-01-01

The approach to skeletal dysmorphisms in the maxillofacial area usually requires an orthodontic treatment by means of fixed appliances, both before and after the surgical phase. Since its introduction, Invisalign system has become a popular treatment choice for the clinicians because of the aesthetics and comfort of the removable clear aligners compared with the traditional appliances. Therefore, the aim of the present report was to illustrate the management of a malocclusion by means of Invisalign system associated with the traditional surgical technique. The present paper shows a case of a 23-year-old male patient characterized by a Class III malocclusion with lateral deviation of the mandible to the left side and cross-bite on teeth 2.2, 2.3, and 2.4. Invisalign system was used during the pre- and postsurgical phases rather than fixed appliances. The posttreatment cephalometric analysis emphasized the stability of the dental and skeletal symmetry corrections, occlusion and functional balance, over a 6-year follow-up. The results achieved at the end of the treatment showed how Invisalign can be effective in the management of the orthodontic phases in orthognathic surgery. The follow-up after 6 years emphasizes the stability of the treatment over time.

The Use of Invisalign® System in the Management of the Orthodontic Treatment before and after Class III Surgical Approach

Directory of Open Access Journals (Sweden)

Renato Pagani

2016-01-01

Full Text Available The approach to skeletal dysmorphisms in the maxillofacial area usually requires an orthodontic treatment by means of fixed appliances, both before and after the surgical phase. Since its introduction, Invisalign system has become a popular treatment choice for the clinicians because of the aesthetics and comfort of the removable clear aligners compared with the traditional appliances. Therefore, the aim of the present report was to illustrate the management of a malocclusion by means of Invisalign system associated with the traditional surgical technique. The present paper shows a case of a 23-year-old male patient characterized by a Class III malocclusion with lateral deviation of the mandible to the left side and cross-bite on teeth 2.2, 2.3, and 2.4. Invisalign system was used during the pre- and postsurgical phases rather than fixed appliances. The posttreatment cephalometric analysis emphasized the stability of the dental and skeletal symmetry corrections, occlusion and functional balance, over a 6-year follow-up. The results achieved at the end of the treatment showed how Invisalign can be effective in the management of the orthodontic phases in orthognathic surgery. The follow-up after 6 years emphasizes the stability of the treatment over time.

Strategies to finish orthodontic treatment with a Class III molar relationship: three patient reports.

Science.gov (United States)

Farret, Milton M B; Farret, Marcel M; Farret, Alessandro M

2009-01-01

The purpose of this article is to review treatment concepts for patients with congenitally missing teeth in the mandible, for patients in whom teeth in only the mandibular arch were extracted, or for patients with Class III camouflage treatment. The therapy result in these situations is a Class III molar relationship. With this type of intercuspation, esthetic and functional aspects must be observed. © 2009 BY QUINTESSENCE PUBLISHING CO, INC.

Treatment in Borderline Class III Malocclusion: Orthodontic Camouflage (Extraction) Versus Orthognathic Surgery.

Science.gov (United States)

Rabie, A-Bakr M; Wong, Ricky W K; Min, G U

2008-01-01

To investigate the differences in morphological characteristics of borderline class III patients who had undergone camouflage orthodontic treatment or orthognathic surgery, and to compare the treatment effects between these two modalities. Cephalograms of 25 patients (13 orthodontic, 12 surgical) with class III malocclusion were analyzed. All had a pretreatment ANB angle greater than -5 masculine. Using discriminant analysis, only Holdaway angle was selected to differentiate patients in the pretreatment stage. Seventy-two per cent patients were correctly classified. In the orthodontic group, reverse overjet was corrected by retraction of the lower incisors and downward and backward rotation of the mandible. The surgical group was corrected by setback of the lower anterior dentoalveolus and uprighting of the lower incisors. No difference was found in posttreatment soft tissue measurements between the two groups. Twelve degree for the Holdaway angle can be a guideline in determining the treatment modalities for borderline class III patients, but the preferences of operators and patients are also important. (2) Both therapeutic options should highlight changes in the lower dentoalveolus and lower incisors. (3) Both treatment modalities can achieve satisfactory improvements to the people.

Peripheral nerve injury causes transient expression of MHC class I antigens in rat motor neurons and skeletal muscles

DEFF Research Database (Denmark)

Maehlen, J; Nennesmo, I; Olsson, A B

1989-01-01

After a peripheral nerve lesion (rat facial and sciatic) an induction of major histocompatibility complex (MHC) antigens class I was detected immunohistochemically in skeletal muscle fibers and motor neurons. This MHC expression was transient after a nerve crush, when regeneration occurred......, but persisted after a nerve cut, when regeneration was prevented. Since the time course of MHC class I expression correlates to that of regeneration a role for this cell surface molecule in regeneration may be considered....

Orthodontic camouflage versus orthognathic surgery for class III deformity: comparative cephalometric analysis.

Science.gov (United States)

Martinez, P; Bellot-Arcís, C; Llamas, J M; Cibrian, R; Gandia, J L; Paredes-Gallardo, V

2017-04-01

The objective of this study was to compare different cephalometric variables in adult patients with class III malocclusions before and after treatment, in order to determine which variables are indicative of orthodontic camouflage or orthognathic surgery. The cases of 156 adult patients were assessed: 77 treated with orthodontic camouflage and 79 treated with orthodontics and orthognathic surgery. The following cephalometric variables were measured on pre-treatment (T1) and post-treatment (T2) lateral cephalograms: sella-nasion-A-point (SNA), sella-nasion-B-point (SNB), and A-point-nasion-B-point (ANB) angles, Wits appraisal, facial axis angle, mandibular plane angle, upper and lower incisor inclination, and inter-incisal angle. There were statistically significant differences in cephalometric variables before and after treatment between the two groups. The percentage of normal pre-treatment measurements in the camouflage orthodontics group was 30.7%, which worsened slightly to 28.4% post-treatment. However in the group receiving surgery, this was 24.5% pre-treatment, improving to 33.5% after surgery. SNA, SNB, Wits appraisal, lower incisor inclination, and inter-incisal angle showed differences between the two groups before and after treatment. Wits appraisal, lower incisor inclination, and inter-incisal angle were indicative of one or other treatment. Upper and lower incisor decompensation in both groups did not reach ideal values, which impeded complete skeletal correction in 52% of surgical cases. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Alteration of Occlusal Plane in Orthognathic Surgery: Clinical Features to Help Treatment Planning on Class III Patients

Directory of Open Access Journals (Sweden)

Daniel Amaral Alves Marlière

2018-01-01

Full Text Available Dentofacial deformities (DFD presenting mainly as Class III malocclusions that require orthognathic surgery as a part of definitive treatment. Class III patients can have obvious signs such as increasing the chin projection and chin throat length, nasolabial folds, reverse overjet, and lack of upper lip support. However, Class III patients can present different facial patterns depending on the angulation of occlusal plane (OP, and only bite correction does not always lead to the improvement of the facial esthetic. We described two Class III patients with different clinical features and inclination of OP and had undergone different treatment planning based on 6 clinical features: (I facial type; (II upper incisor display at rest; (III dental and gingival display on smile; (IV soft tissue support; (V chin projection; and (VI lower lip projection. These patients were submitted to orthognathic surgery with different treatment plannings: a clockwise rotation and counterclockwise rotation of OP according to their facial features. The clinical features and OP inclination helped to define treatment planning by clockwise and counterclockwise rotations of the maxillomandibular complex, and two patients undergone to bimaxillary orthognathic surgery showed harmonic outcomes and stables after 2 years of follow-up.

Two-Step Extraction of the Lower First Molar for Class III Treatment in Adult Patient.

Science.gov (United States)

Almeida, Kélei Cristina de Mathias; Paulin, Ricardo Fabris; Raveli, Taísa Barnabé; Raveli, Dirceu Barnabé; Santos-Pinto, Ary

2016-01-01

The aim of this article is to describe a case report of Class III malocclusion treatment with lower first molar extraction. The 27-year-old Caucasian male patient presented a symmetric face with a straight profile, hyperdivergent growth pattern, molar and cuspid Class III relation, and an anterior crossbite as well as a mild crowding on cuspids area, in both upper and lower arches and a tendency to posterior crossbite. The treatment was performed by the use of Haas expansion appliance followed by an initial alignment and leveling of the upper and lower arches with a fixed edgewise appliance, extraction of lower teeth aiming the correction of the incisors proclination and end the treatment with a Class I molar relationship. It resulted in a significant change in the patient's profile, dentoalveolar Class III correction, upper arch expansion, leveling and alignment of the upper and lower arches, and improvement of tipping of the upper and lowers incisors. In cases of a dentoalveolar compensation in well positioned bone bases the treatment with fixed appliances is an alternative and extraction of lower teeth is considered.

Self-esteem in adolescents with Angle Class I, II and III malocclusion in a Peruvian sample.

Science.gov (United States)

Florián-Vargas, Karla; Honores, Marcos J Carruitero; Bernabé, Eduardo; Flores-Mir, Carlos

2016-01-01

To compare self-esteem scores in 12 to 16-year-old adolescents with different Angle malocclusion types in a Peruvian sample. A cross-sectional study was conducted in a sample of 276 adolescents (159, 52 and 65 with Angle Class I, II and III malocclusions, respectively) from Trujillo, Peru. Participants were asked to complete the Rosenberg Self-Esteem Scale (RSES) and were also clinically examined, so as to have Angle malocclusion classification determined. Analysis of covariance (ANCOVA) was used to compare RSES scores among adolescents with Class I, II and III malocclusions, with participants' demographic factors being controlled. Mean RSES scores for adolescents with Class I, II and III malocclusions were 20.47 ± 3.96, 21.96 ± 3.27 and 21.26 ± 4.81, respectively. The ANCOVA test showed that adolescents with Class II malocclusion had a significantly higher RSES score than those with Class I malocclusion, but there were no differences between other malocclusion groups. Supplemental analysis suggested that only those with Class II, Division 2 malocclusion might have greater self-esteem when compared to adolescents with Class I malocclusion. This study shows that, in general, self-esteem did not vary according to adolescents' malocclusion in the sample studied. Surprisingly, only adolescents with Class II malocclusion, particularly Class II, Division 2, reported better self-esteem than those with Class I malocclusion. A more detailed analysis assessing the impact of anterior occlusal features should be conducted.

The impact of functional jaw orthopedics in subjects with unfavorable Class II skeletal patterns.

Science.gov (United States)

Baccetti, Tiziano; McNamara, James A

2010-01-01

To evaluate the outcomes of functional jaw orthopedics (FJO) followed by fixed appliances in Class II patients showing cephalometric signs predictive of unfavorable responsiveness to orthopedic treatment. A total of 48 treated subjects (20 males, 28 females) with unfavorable Class II malocclusions were treated with FJO at the adolescent growth spurt, followed by fixed appliances. Treatment outcomes were compared with the growth changes in a matched control group of untreated subjects with "unfavorable" Class II malocclusions. A significant prevalence rate of successful outcome was recorded within the treated group (64.5%). When compared with the untreated controls, both the overall treated group and the successful treated subgroup revealed a significant reduction in maxillary growth and sagittal position, along with a significant enhancement in mandibular length, sagittal advancement of the mandible, and significant improvements in the maxillo-mandibular relationships. Both overjet and molar relation showed significant favorable changes in the treated group. FJO at the pubertal spurt followed by fixed appliances is a viable therapeutical option in patients with "unfavorable" Class II malocclusions, although skeletal changes are of minor entity. Copyright © 2010 Società Italiana di Ortodonzia SIDO. Published by Elsevier Srl. All rights reserved.

Evaluation of temporomandibular disorders in Class III patients treated with mandibular cervical headgear and fixed appliances.

Science.gov (United States)

Rey, Diego; Oberti, Giovanni; Baccetti, Tiziano

2008-03-01

Our aim in this study was to evaluate the prevalence of temporomandibular disorders (TMD) in Class III patients treated with mandibular cervical headgear (MCH) and fixed appliances. The sample of 75 patients included 25 patients with no previous orthodontic treatment, 25 Class I patients who had undergone orthodontic treatment with fixed appliances and without extractions, and 25 patients with dentoskeletal Class III disharmonies treated with MCH and fixed appliances. The Helkimo index was used to test the prevalence of TMD symptoms in the 3 groups. The prevalence rates of the Helkimo index in the 3 groups were compared with the z score on proportions. No statistically significant differences in the prevalence rates of the Helkimo index scores in the 3 groups were found (P = .367). Most subjects in the 3 groups had an Helkimo index of zero (66.7%). Subjects with Class III malocclusions treated with MCH and fixed appliances do not have greater prevalence of TMD symptoms than do Class I subjects treated with fixed appliances or untreated subjects.

A cephalometric analysis of Class II dentate subjects to establish a formula to determine the occlusal plane in Class II edentate subjects: A neo adjunct

OpenAIRE

Nikita Sinha; K Mahendranadh Reddy; Nidhi Gupta; Y M Shastry

2017-01-01

Purpose: Occlusal plane (OP) differs considerably in participants with skeletal Class I and Class II participants. In this study, cephalometrics has been used to help in the determination of orientation of the OP utilizing the nonresorbable bony anatomic landmarks in skeletal Class II participants and an attempt has been made to predict and examine the OP in individuals with skeletal class II jaw relationship. Materials and Methods: One hundred dentulous participants with skeletal Class II...

Orthodontic clockwise rotation of maxillomandibular complex for improving facial profile in late teenagers with Class III malocclusion: A preliminary report

OpenAIRE

Eric JW Liou; Yu-Chi Wang

2018-01-01

Objective: Orthodontic camouflage treatments improve occlusion but might worsen facial profile in patients with Class III malocclusion. It has been reported that surgical clockwise rotation of maxillomandibular complex (MMc) improves facial profile by reducing chin prominence and chin throat length in patients with Class III malocclusion. The purpose of this report was to illustrate two orthodontic techniques for clockwise rotation of the MMc in late teenagers with Class III malocclusion and ...

Self-esteem in adolescents with Angle Class I, II and III malocclusion in a Peruvian sample

Directory of Open Access Journals (Sweden)

Karla Florián-Vargas

2016-04-01

Full Text Available ABSTRACT Objective: To compare self-esteem scores in 12 to 16-year-old adolescents with different Angle malocclusion types in a Peruvian sample. Material and Methods: A cross-sectional study was conducted in a sample of 276 adolescents (159, 52 and 65 with Angle Class I, II and III malocclusions, respectively from Trujillo, Peru. Participants were asked to complete the Rosenberg Self-Esteem Scale (RSES and were also clinically examined, so as to have Angle malocclusion classification determined. Analysis of covariance (ANCOVA was used to compare RSES scores among adolescents with Class I, II and III malocclusions, with participants' demographic factors being controlled. Results: Mean RSES scores for adolescents with Class I, II and III malocclusions were 20.47 ± 3.96, 21.96 ± 3.27 and 21.26 ± 4.81, respectively. The ANCOVA test showed that adolescents with Class II malocclusion had a significantly higher RSES score than those with Class I malocclusion, but there were no differences between other malocclusion groups. Supplemental analysis suggested that only those with Class II, Division 2 malocclusion might have greater self-esteem when compared to adolescents with Class I malocclusion. Conclusion: This study shows that, in general, self-esteem did not vary according to adolescents' malocclusion in the sample studied. Surprisingly, only adolescents with Class II malocclusion, particularly Class II, Division 2, reported better self-esteem than those with Class I malocclusion. A more detailed analysis assessing the impact of anterior occlusal features should be conducted.

Surgical-orthodontic correction of a Class III dentofacial deformity.

Science.gov (United States)

Devanna, Raghu; Kakkirala, Neelima

2010-04-01

This case report describes the surgical-orthodontic treatment of a 26-year-old post-pubertal male patient with a Class III dentofacial deformity. In the pre-surgical orthodontic phase of treatment, a reverse overjet of 5.5 mm was created and arch compatibility was obtained. A mandibualr set back with BSSO was performed during surgery to restore ideal overjet, overbite, occlusion and optimal esthetics. After 1 year of treatment, the results remained stable.

Augmented corticotomy-assisted surgical orthodontics decompensates lower incisors in Class III malocclusion patients.

Science.gov (United States)

Wang, Bo; Shen, Guofang; Fang, Bing; Yu, Hongbo; Wu, Yong; Sun, Liangyan

2014-03-01

To quantitatively evaluate lower incisor decompensation and the surrounding periodontal region after augmented corticotomy-assisted surgical orthodontics in patients with Class III malocclusion. This prospective study enrolled patients with severe Class III malocclusion who underwent augmented corticotomy in the lower anterior region before orthodontic surgery. Cone-beam computed tomograms and lateral cephalograms were obtained before treatment (T0), after presurgical orthodontic treatment (T1), and at removal of the orthodontic surgical appliances (T2). Repeated measures analysis of variance was used to compare variables at each time point: root length (RL), anterior vertical alveolar bone level at the labial side (AVBL), posterior vertical alveolar bone level at the lingual side (PVBL), labial alveolar bone thickness at the apex (LA), lingual alveolar bone thickness at the apex (LP), and angle of the incisor to the mandibular plane (L1-MP). In the 8 subjects studied, RL was maintained from T0 to T2 (P > .05), whereas AVBL and PVBL increased from T0 to T1 (P .05). LP decreased from T0 to T1 (P lower anterior region in patients with Class III malocclusion. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Comparison of BMI, AHI, and apolipoprotein E ε4 (APOE-ε4) alleles among sleep apnea patients with different skeletal classifications.

Science.gov (United States)

Roedig, Jason J; Phillips, Barbara A; Morford, Lorri A; Van Sickels, Joseph E; Falcao-Alencar, Gabriel; Fardo, David W; Hartsfield, James K; Ding, Xiuhua; Kluemper, G Thomas

2014-04-15

This case-control study investigated whether variations within the APOE-ε gene were associated with having a convex facial profile (skeletal Class II) compared to exhibiting a straight or concave facial profile (Class I or Class III) among patients with obstructive sleep apnea (OSA). Associations between the apnea-hypopnea index (AHI) and body mass index (BMI) scores for these OSA patients were also examined in the context of facial profile. OSA patients with an AHI ≥ 15 were recruited from a sleep clinic and classified by facial and dental occlusal relationships based on a profile facial analysis, lateral photographs, and dental examination. Saliva was collected as a source of DNA. The APOE-ε1-4 allele-defining single nucleotide polymorphisms (SNPs) rs429358 and rs7412 were genotyped. A χ(2) analysis was used to assess Hardy-Weinberg equilibrium and for association analysis (significance at p < 0.05). ANOVA and Fisher exact test were also used. Seventy-six Caucasian OSA patients participated in the study-25 Class II cases and 51 non-Class II cases. There was no association of the APOE-ε4 allele with facial profile among these OSA patients. Class II OSA patients had significantly lower BMIs (30.7 ± 5.78) than Class I (37.3 ± 6.14) or Class III (37.8 ± 6.17) patients (p < 0.001), although there was no statistical difference in AHI for Class II patients compared with other groups. OSA patients with Class II convex profile were more likely to have a lower BMI than those in other skeletal groups. In fact 20% of them were not obese, suggesting that a Class II convex profile may influence or be associated with OSA development independent of BMI.

[Orthodontic treatment of malocclusion Class III in patients aged 6-12 by Postnikov appliance, face mask and bracket system].

Science.gov (United States)

Postnikov, M A; Trunin, D A; Pankratova, N V; Nesterov, A M; Sadykov, M I; Ostankov, S A

2018-01-01

The diagnostics and treatment of malocclusion Class III in patients aged 6-12 is an vital problem in orthodontics. Method of orthodontic treatment of malocclusion Class III in patients with the help of improved and patented orthodontic construction - 'Postnikov appliance' - and face mask and bracket system is analysed in the article. Orthodontic treatment of malocclusion Class III was examined in 24 patients aged 6-12 by the suggested method. All patients were examined clinically and with the help af additional diagnostic methods: head cephalometry in lateral position with further data analysis in Dolphin Imaging (USA). The use of computer technologies in Dolphin Imaging helps to controll the process of correction of dentition correlation in different stages of treatment, to reduce the period of treatment of malocclusion Class III in patients aged 6-12 and to improve face esthetics and life quality ratio.

Six-year follow-up in skeletal Class III patient aged over 40 receiving orthognathic surgery and autotransplantation: a case report.

Science.gov (United States)

Motegi, Etsuko; Takane, Yumi; Tokunaga, Eri; Sueishi, Kenji; Takano, Nobuo; Shibahara, Takahiko; Saito, Chikara

2009-08-01

This paper describes the post-operative course of care in a patient requiring orthognathic surgery for skeletal mandibular protrusion in whom autotransplantation of a third molar was performed. A lower third molar that had to be removed for sagittal split ramus osteotomy (SSRO) was transplanted to replace the missing right second molar during pre-surgical orthodontic treatment, contributing to post-treatment occlusal stability. A 44-year-old woman presented with mandibular protrusion. The upper left second molar was congenitally missing and the lower right second molar had been extracted. She was diagnosed as having skeletal mandibular protrusion with excess vertical growth of the mandible and anterior open bite. Correction of the skeletal problem required orthognathic surgery by SSRO and Le Fort I osteotomy without orthodontic tooth extraction. At month 5 during 18 months of pre-surgical orthodontic treatment, the lower left third molar was transplanted to the lower right second molar site. Active treatment was completed after 7 months of post-surgical orthodontic treatment. The patient wore upper and lower Begg-type removable retainers for approximately 2 years. She returned for a recall checkup at 6 years post-treatment. Although radiographic examination revealed root resorption and ankylosis of the autotransplanted tooth at 8 years after transplantation, occlusion has remained stable with no clinically significant complications. The autotransplanted tooth helped stabilize her occlusion and acted as a kind of temporary tooth prior to the final decision on treatment to be given such a dental implant.

Changes in soft tissue profile using functional appliances in the treatment of skeletal class II malocclusion

Directory of Open Access Journals (Sweden)

Stamenković Zorana

2015-01-01

Full Text Available Introduction. The effects of orthodontic treatment are considered to be successful if the facial harmony is achieved, while the structures of soft tissue profile are in harmony with skeletal structures of neurocranium and viscerocranium. In patients with skeletal distal bite caused by mandibular retrognathism, facial esthetics is disturbed often, in terms of pronounced convexity of the profile and change in the position and relationship of the lips. Objective. The aim of this study was to determine the extent of soft tissue profile changes in patients with skeletal Class II malocclusion treated with three different orthodontic appliances: Fränkel functional regulator type I (FR-I, Balters’ Bionator type I and Hotz appliance. Methods. The study included 60 patients diagnosed with skeletal Class II malocclusion caused by mandibular retrognathism, in the period of early mixed dentition. Each subgroup of 20 patients was treated with a variety of orthodontic appliances. On the lateral cephalogram, before and after treatment, the following parameters were analyzed: T angle, H angle, the height of the upper lip, the position of the upper and lower lip in relation to the esthetic line. Within the statistical analysis the mean, maximum, minimum, standard deviation, coefficient of variation, two-factor analysis of variance with repeated measures and the factor analysis of variance were calculated using ANOVA, Bonferroni test and Student’s t-test. Results. A significant decrease of angles T and H was noticed in the application of FR-I, from 21.60° to 17.15°, and from 16.45° to 13.40° (p<0.001. FR-I decreased the height of the upper lip from 26.15 mm to 25.85 mm, while Hotz appliance and Balters’ Bionator type I increased the height of the upper lip, thereby deteriorating esthetics of the patient. Conclusion. All used orthodontic appliances lead to changes in soft tissue profile in terms of improving facial esthetics, with the most distinctive

A benefit-risk assessment of class III antiarrhythmic agents

DEFF Research Database (Denmark)

Elming, Hanne; Brendorp, Bente; Pehrson, Steen

2004-01-01

The prevalence of arrhythmia in the population is increasing as more people survive for longer with cardiovascular disease. It was once thought that antiarrhythmic therapy could save life, however, it is now evident that antiarrhythmic therapy should be administrated with the purpose of symptomat......, and reducing the need for implantable cardioverter defibrillator shock/antitachycardia therapy, since no class III antiarrhythmic agents have proven survival benefit. The risks discussed mainly focus on pro-arrhythmia as torsade de pointes ventricular tachycardia....

Surgical-orthodontic correction of a Class III dentofacial deformity

Directory of Open Access Journals (Sweden)

Raghu Devanna

2010-01-01

Full Text Available This case report describes the surgical-orthodontic treatment of a 26-year-old post-pubertal male patient with a Class III dentofacial deformity. In the pre-surgical orthodontic phase of treatment, a reverse overjet of 5.5 mm was created and arch compatibility was obtained. A mandibualr set back with BSSO was performed during surgery to restore ideal overjet, overbite, occlusion and optimal esthetics. After 1 year of treatment, the results remained stable.

[Orthopedic treatment of dento-skeletal Class II by the association minivis + Forsus(TM): a clinical case].

Science.gov (United States)

Pujol, Pierre

2014-06-01

The use of customized combination mechanics with two auxillaries such as mini screws and Forsus(TM) Springs that up to now have been used independently, achieved unexpected results in the correction of a non-surgical skeletal Class II malocclusion. The use of mini implants to control the canting of the occlusal plane that is frequently reported during the use of hyperpropulsors with fixed appliances made it possible to achieve a better mandibular outcome. © EDP Sciences, SFODF, 2014.

Long-term stability of an adult Class III open-bite malocclusion treated with multiloop edgewise archwire

Directory of Open Access Journals (Sweden)

Chien-Chun Kuo

2009-09-01

Full Text Available This case report describes the treatment of a 17-year-old girl with an anterior open- bite and Class III malocclusion, who had a history of thumb-sucking habit in childhood. The multiloop edgewise archwire technique was used on the mandibular arch to facilitate uprighting of the mandibular posterior teeth, change the cant of occlusal plane, close the anterior open-bite, and correct the Class III malocclusion. At the end of treatment, Class I occlusion and correction of the anterior open-bite had been achieved. An examination 8 years 8 months after treatment revealed long-term stability of the treatment results.

Changes in oro-pharyngeal airway dimension after treatment with function appliance in class II skeletal pattern

International Nuclear Information System (INIS)

Ali, B.; Shaikh, A.; Fida, M.

2015-01-01

Background: Functional appliances have been used since many decades for the correction of mandibular retrognathism. Similar oral appliances are a treatment modality for patients with Obstructive sleep apnea. Hence, interception at the right age with these growth modification appliances might benefit a child from developing long term respiratory insufficiency. Therefore, the purpose of our study was to assess the short term effects of Twin block appliance (CTB) on pharyngeal airway size in subjects with skeletal Class II pattern in a sample of Pakistani population. Methods: A retrospective study was conducted from orthodontic records of 62 children (31 males, 31 females) with retrognathic mandibles using lateral cephalograms obtained at initial visit and after CTB treatment. Paired t-test was used to compare the pre-functional and post-functional treatment airway size. Independent sample t-test was used for comparison between the genders and statistical significance was kept at =0.05. Results: The upper airway width (p<0.001), nasopharyngeal depth (p=0.03) and upper airway thickness (p=0.008) was substantially improved after CTB treatment. Males showed a greater increase in upper airway width (p= 0.03) and nasopharyngeal depth (p=0.01) in comparison to the females. Conclusion: Functional appliance therapy can improve the narrow pharyngeal airway of growing children presenting with deficient mandibles having Class II skeletal pattern. (author)

Escherichia coli class Ib ribonucleotide reductase contains a dimanganese(III)-tyrosyl radical cofactor in vivo†

Science.gov (United States)

Cotruvo, Joseph A.; Stubbe, JoAnne

2011-01-01

Escherichia coli class Ib ribonucleotide reductase (RNR) converts nucleoside 5′-diphosphates to deoxynucleoside 5′-diphosphates in iron-limited and oxidative stress conditions. We have recently demonstrated in vitro that this RNR is active with both diferric-tyrosyl radical (FeIII2-Y•) and dimanganese(III)-Y• (MnIII2-Y•) cofactors in the β2 subunit, NrdF [Cotruvo J.A., Jr. and Stubbe J., Biochemistry (2010) 49, 1297–1309]. Here we demonstrate, by purification of this protein from its endogenous levels in an E. coli strain deficient in its five known iron uptake pathways and grown under iron-limited conditions, that the MnIII2-Y• cofactor is assembled in vivo. This is the first definitive determination of the active cofactor of a class Ib RNR purified from its native organism without overexpression. From 88 g of cell paste, 150 μg of NrdF was isolated with ~95% purity, with 0.2 Y•/β2, 0.9 Mn/β2, and a specific activity of 720 nmol/min/mg. In these conditions, the class Ib RNR is the primary active RNR in the cell. Our results strongly suggest that E. coli NrdF is an obligate manganese protein in vivo and that the MnIII2-Y• cofactor assembly pathway we have identified in vitro involving the flavodoxin-like protein NrdI, present inside the cell at catalytic levels, is operative in vivo. PMID:21250660

Evaluation depth of the curve of Spee in class I, class II, and class III malocclusion: A cross sectional study

Directory of Open Access Journals (Sweden)

Sanjna Nayar

2015-01-01

Full Text Available Occlusal plane is an essential consideration when multiple long-span posterior restorations are designed. When restorations are added to an existing tooth arrangement characterized by rotated, tipped, or extruded teeth, excursive interferences may be incorporated, resulting in detrimental squeal. The curve of Spee, which exists in the ideal natural dentition, allows harmony to exist between the anterior tooth and condylar guidance. This curve exists in the sagittal plane and is the best viewed from a lateral aspect. It permits total posterior disclusion on mandibular protrusion, given proper anterior tooth guidance. It is unclear that whether the curve of Spee is a description of the occlusal surface of each arch separately or in maximal intercuspation. The purpose of this study was to examine the differences in the depth of curve of Spee between the class I, class II, class III and to investigate the relationship of depth of curve of Spee with over jet, over-bite.

Camouflage of Severe Skeletal Class II Gummy Smile Patient Treated Nonsurgically with Mini Implants

Directory of Open Access Journals (Sweden)

Irfan Qamruddin

2014-01-01

Full Text Available Skeletal class II has always been a challenge in orthodontics and often needs assistance of surgical orthodontics in nongrowing patients when it presents with severe discrepancy. Difficulty increases more when vertical dysplasia is also associated with sagittal discrepancy. The advent of mini implants in orthodontics has broadened the spectrum of camouflage treatment. This case report presents a 16-year-old nongrowing girl with severe class II because of retrognathic mandible, and anterior dentoalveolar protrusion sagittally and vertically resulted in severe overjet of 13 mm and excessive display of incisors and gums. Both maxillary central incisors were trimmed by general practitioner few years back to reduce visibility. Treatment involved use of micro implant for retraction and intrusion of anterior maxillary dentoalveolar segment while lower incisors were proclined to obtain normal overjet, and overbite and pleasing soft tissue profile. Smile esthetics was further improved with composite restoration of incisal edges of both central incisors.

Proteomics computational analyses suggest that the bornavirus glycoprotein is a class III viral fusion protein (γ penetrene

Directory of Open Access Journals (Sweden)

Garry Robert F

2009-09-01

Full Text Available Abstract Background Borna disease virus (BDV is the type member of the Bornaviridae, a family of viruses that induce often fatal neurological diseases in horses, sheep and other animals, and have been proposed to have roles in certain psychiatric diseases of humans. The BDV glycoprotein (G is an extensively glycosylated protein that migrates with an apparent molecular mass of 84,000 to 94,000 kilodaltons (kDa. BDV G is post-translationally cleaved by the cellular subtilisin-like protease furin into two subunits, a 41 kDa amino terminal protein GP1 and a 43 kDa carboxyl terminal protein GP2. Results Class III viral fusion proteins (VFP encoded by members of the Rhabdoviridae, Herpesviridae and Baculoviridae have an internal fusion domain comprised of beta sheets, other beta sheet domains, an extended alpha helical domain, a membrane proximal stem domain and a carboxyl terminal anchor. Proteomics computational analyses suggest that the structural/functional motifs that characterize class III VFP are located collinearly in BDV G. Structural models were established for BDV G based on the post-fusion structure of a prototypic class III VFP, vesicular stomatitis virus glycoprotein (VSV G. Conclusion These results suggest that G encoded by members of the Bornavirdae are class III VFPs (gamma-penetrenes.

Impact of low skeletal muscle mass and density on short and long-term outcome after resection of stage I-III colorectal cancer.

Science.gov (United States)

van Vugt, Jeroen L A; Coebergh van den Braak, Robert R J; Lalmahomed, Zarina S; Vrijland, Wietske W; Dekker, Jan W T; Zimmerman, David D E; Vles, Wouter J; Coene, Peter-Paul L O; IJzermans, Jan N M

2018-06-06

Preoperative low skeletal muscle mass and density are associated with increased postoperative morbidity in patients undergoing curative colorectal cancer (CRC) surgery. However, the long-term effects of low skeletal muscle mass and density remain uncertain. Patients with stage I-III CRC undergoing surgery, enrolled in a prospective observational cohort study, were included. Skeletal muscle mass and density were measured on CT. Patients with high and low skeletal muscle mass and density were compared regarding postoperative complications, disease-free survival (DFS), overall survival (OS), and cancer-specific survival (CSS). In total, 816 patients (53.9% males, median age 70) were included; 50.4% had low skeletal muscle mass and 64.1% low density. The severe postoperative complication rate was significantly higher in patients with low versus high skeletal muscle and density (20.9% versus 13.6%, p = 0.006; 20.0% versus 11.8%, p = 0.003). Low skeletal muscle mass (OR 1.91, p = 0.018) and density (OR 1.87, p = 0.045) were independently associated with severe postoperative complications. Ninety-day mortality was higher in patients with low skeletal muscle mass and density compared with patients with high skeletal muscle mass and density (3.6% versus 1.7%, p = 0.091; 3.4% versus 1.0%, p = 0.038). No differences in DFS were observed. After adjustment for covariates such as age and comorbidity, univariate differences in OS and CSS diminished. Low skeletal muscle mass and density are associated with short-term, but not long-term, outcome in patients undergoing CRC surgery. These findings recommend putting more emphasis on preoperative management of patients at risk for surgical complications, but do not support benefit for long-term outcome. Copyright © 2018 Elsevier Ltd, BASO ~ The Association for Cancer Surgery, and the European Society of Surgical Oncology. All rights reserved.

TGF-β-stimulated aberrant expression of class III β-tubulin via the ERK signaling pathway in cultured retinal pigment epithelial cells

International Nuclear Information System (INIS)

Chung, Eun Jee; Chun, Ji Na; Jung, Sun-Ah; Cho, Jin Won; Lee, Joon H.

2011-01-01

Highlights: ► TGF-β induces aberrant expression of βIII in RPE cells via the ERK pathway. ► TGF-β increases O-GlcNAc modification of βIII in RPE cells. ► Mature RPE cells have the capacity to express a neuron-associated gene by TGF-β. -- Abstract: The class III β-tubulin isotype (β III ) is expressed exclusively by neurons within the normal human retina and is not present in normal retinal pigment epithelial (RPE) cells in situ or in the early phase of primary cultures. However, aberrant expression of class III β-tubulin has been observed in passaged RPE cells and RPE cells with dedifferentiated morphology in pathologic epiretinal membranes from idiopathic macular pucker, proliferative vitreoretinopathy (PVR) and proliferative diabetic retinopathy (PDR). Transforming growth factor-β (TGF-β) has been implicated in dedifferentiation of RPE cells and has a critical role in the development of proliferative vitreoretinal diseases. Here, we investigated the potential effects of TGF-β on the aberrant expression of class III β-tubulin and the intracellular signaling pathway mediating these changes. TGF-β-induced aberrant expression and O-linked-β-N-acetylglucosamine (O-GlcNac) modification of class III β-tubulin in cultured RPE cells as determined using Western blotting, RT-PCR and immunocytochemistry. TGF-β also stimulated phosphorylation of ERK. TGF-β-induced aberrant expression of class III β-tubulin was significantly reduced by pretreatment with U0126, an inhibitor of ERK phosphorylation. Our findings indicate that TGF-β stimulated aberrant expression of class III β-tubulin via activation of the ERK signaling pathway. These data demonstrate that mature RPE cells have the capacity to express a neuron-associated gene in response to TGF-β stimulation and provide useful information towards understanding the pathogenesis of proliferative vitreoretinal diseases.

TGF-{beta}-stimulated aberrant expression of class III {beta}-tubulin via the ERK signaling pathway in cultured retinal pigment epithelial cells

Energy Technology Data Exchange (ETDEWEB)

Chung, Eun Jee [Department of Ophthalmology, National Health Insurance Corporation Ilsan Hospital, Gyeonggi-do (Korea, Republic of); Chun, Ji Na; Jung, Sun-Ah [Konyang University Myunggok Medical Research Institute, Kim' s Eye Hospital, Konyang University College of Medicine, Seoul (Korea, Republic of); Cho, Jin Won [Department of Biology, Yonsei University, 134 Shinchon-dong, Seodaemun-gu, Seoul 120-749 (Korea, Republic of); Lee, Joon H., E-mail: joonhlee@konyang.ac.kr [Konyang University Myunggok Medical Research Institute, Kim' s Eye Hospital, Konyang University College of Medicine, Seoul (Korea, Republic of)

2011-11-18

Highlights: Black-Right-Pointing-Pointer TGF-{beta} induces aberrant expression of {beta}III in RPE cells via the ERK pathway. Black-Right-Pointing-Pointer TGF-{beta} increases O-GlcNAc modification of {beta}III in RPE cells. Black-Right-Pointing-Pointer Mature RPE cells have the capacity to express a neuron-associated gene by TGF-{beta}. -- Abstract: The class III {beta}-tubulin isotype ({beta}{sub III}) is expressed exclusively by neurons within the normal human retina and is not present in normal retinal pigment epithelial (RPE) cells in situ or in the early phase of primary cultures. However, aberrant expression of class III {beta}-tubulin has been observed in passaged RPE cells and RPE cells with dedifferentiated morphology in pathologic epiretinal membranes from idiopathic macular pucker, proliferative vitreoretinopathy (PVR) and proliferative diabetic retinopathy (PDR). Transforming growth factor-{beta} (TGF-{beta}) has been implicated in dedifferentiation of RPE cells and has a critical role in the development of proliferative vitreoretinal diseases. Here, we investigated the potential effects of TGF-{beta} on the aberrant expression of class III {beta}-tubulin and the intracellular signaling pathway mediating these changes. TGF-{beta}-induced aberrant expression and O-linked-{beta}-N-acetylglucosamine (O-GlcNac) modification of class III {beta}-tubulin in cultured RPE cells as determined using Western blotting, RT-PCR and immunocytochemistry. TGF-{beta} also stimulated phosphorylation of ERK. TGF-{beta}-induced aberrant expression of class III {beta}-tubulin was significantly reduced by pretreatment with U0126, an inhibitor of ERK phosphorylation. Our findings indicate that TGF-{beta} stimulated aberrant expression of class III {beta}-tubulin via activation of the ERK signaling pathway. These data demonstrate that mature RPE cells have the capacity to express a neuron-associated gene in response to TGF-{beta} stimulation and provide useful information

PENGGUNAAN FACE-MASK & EKSPANSI PALATAL PADA PERAWATAN MALOKLUSI KLAS III (Studi Pustaka

Directory of Open Access Journals (Sweden)

Krisnawati Krisnawati

2015-08-01

Full Text Available Class III skeletal anomaly is one of the most difficult malocclusions to correct in orthodontics. Orthodontist usually involved chincup appliances to restrain mandibular growth, camouflage techniques to advances maxillary incisors and retract mandibular incisors or waiting untul growth ceased to pursue orthognathic surgery. Many studies found that most of Class III malocclusions were characterized by maxillary retrognathism. In the late 1960s, the Delaire mask was popularized to protract the maxilla. The development of maxillary protraction with facemask and palatal expansion have provided a predictable and effective approach to managing treatment that was once considered difficult. Although no significant difference was found between early or late treatment group, the effect of improvement in facial aesthetics on psychosocial development resulted in a significant advantage for early treatment. However, the effects of face mask therapy should be evaluated over the long term in order to determine the relaps tendency.

[Positive inotropic and lusitropic effect of RP 62719, a new class III antiarrhythmia agent].

Science.gov (United States)

Beregi, J P; Escande, D; Coudray, N; Chemla, D; Mestre, M; Péry, N; Lecarpentier, Y

1994-02-01

Antiarrhythmic drugs, especially the Class I family, exert a negative inotropic effect on the myocardium which is particularly undesirable in patients with depressed left ventricular function. Therefore, research has been directed to the development of new, more specific molecules of the Class III family. The authors studies the mechanical effects of RP 62719 on guinea pig left ventricular papillary muscle. This new molecule is a pure Class III antiarrhythmic, known to lengthen the duration of the cardiac action potential by selectively blocking the potassium current iK1 (inward rectifier K+ current). The mechanical parameters were determined during the phases of contraction and relaxation under isotonic and isometric conditions. At 0.2 and 2 microM concentrations, RP 62719 improved cardiac contraction under both isotonic and isometric conditions with an increase of about 30% of Vmax (p delta 1 (p force normalized per cross-sectional area [AF/S (p actions could provide significant therapeutic advantages especially in patients cardiac failure.

Efeito da expansão palatina sobre o processo pterigoide, sincondrose esfeno-occipital e sela turca em crânios com relação esquelética classe II e classe III pela análise de elementos finitos (AEF) = Effect of the palatal expansion on the pterygoid process, spheno-occipital synchondrosis and sella turcica in skulls with class II and class III skeletal relationship by finite element analysis (FEA)

OpenAIRE

Manuel Gustavo Chávez Sevillano

2015-01-01

Resumo: A Técnica de Expansão Palatina é usada frequentemente para corrigir a mordida cruzada posterior, atresia transversal maxilar e aumentar o perímetro da arcada dentária. O objetivo deste estudo foi avaliar pela análise de elementos finitos o efeito simulado da expansão palatina sobre o processo pterigoide, sincondrose esfeno-occipital e sela turca em dois crânios com relação esquelética tipo Classe II e Classe III, identificando a distribuição das tensões mecânicas nessas estruturas ana...

Skeletal Stability after Large Mandibular Advancement (> 10 mm) with Bilateral Sagittal Split Osteotomy and Skeletal Elastic Intermaxillary Fixation

DEFF Research Database (Denmark)

Schwartz, Kristoffer; Rodrigo, Maria; Jensen, Thomas

2016-01-01

OBJECTIVES: The aim of the present study was to assess the skeletal stability after large mandibular advancement (> 10 mm) with bilateral sagittal split osteotomy and skeletal elastic intermaxillary fixation and to correlate the skeletal stability with the vertical facial type. MATERIAL AND METHODS......: A total of 33 consecutive patients underwent bimaxillary surgery to correct skeletal Class II malocclusion with a mandibular advancement (> 10 mm) measured at B-point and postoperative skeletal elastic intermaxillary fixation for 16 weeks. Skeletal stability was evaluated using lateral cephalometric...... radiographs obtained preoperative (T1), 8 weeks postoperatively (T2), and 18 month postoperatively (T3). B-point and pogonion (Pog) was used to measure the skeletal relapse and the mandibular plane angle (MP-angle) was used to determine the vertical facial type. RESULTS: The mean advancement from T1 to T2...

Identification and cloning of class II and III chitinases from alkaline floral nectar of Rhododendron irroratum, Ericaceae.

Science.gov (United States)

Zha, Hong-Guang; Milne, Richard I; Zhou, Hong-Xia; Chen, Xiang-Yang; Sun, Hang

2016-10-01

Class II and III chitinases belonging to different glycoside hydrolase families were major nectarins in Rhododendron irroratum floral nectar which showed significant chitinolytic activity. Previous studies have demonstrated antimicrobial activity in plant floral nectar, but the molecular basis for the mechanism is still poorly understood. Two chitinases, class II (Rhchi2) and III (Rhchi3), were characterized from alkaline Rhododendron irroratum nectar by both SDS-PAGE and mass spectrometry. Rhchi2 (27 kDa) and Rhchi3 (29 kDa) are glycoside hydrolases (family 19 and 18) with theoretical pI of 8.19 and 7.04. The expression patterns of Rhchi2 and Rhchi3 were analyzed by semi-quantitative RT-PCR. Rhchi2 is expressed in flowers (corolla nectar pouches) and leaves while Rhchi3 is expressed in flowers. Chitinase in concentrated protein and fresh nectar samples was visualised by SDS-PAGE and chitinolytic activity in fresh nectar was determined spectrophotometrically via chitin-azure. Full length gene sequences were cloned with Tail-PCR and RACE. The amino acid sequence deduced from the coding region for these proteins showed high identity with known chitinases and predicted to be located in extracellular space. Fresh R. irroratum floral nectar showed significant chitinolytic activity. Our results demonstrate that class III chitinase (GH 18 family) also exists in floral nectar. The functional relationship between class II and III chitinases and the role of these pathogenesis-related proteins in antimicrobial activity in nectar is suggested.

Thin-plate spline analysis of mandibular morphological changes induced by early class III treatment: a long-term evaluation.

Science.gov (United States)

Franchi, Lorenzo; Pavoni, Chiara; Cerroni, Silvia; Cozza, Paola

2014-08-01

To evaluate the long-term mandibular morphological changes induced by early treatment of class III malocclusion with rapid maxillary expansion (RME) and facial mask (FM). Twenty-five subjects [10 boys, 15 girls; mean age at T1 (start of treatment) 9.3±1.6 years] with class III disharmony were treated with RME and FM therapy followed by fixed appliances. The patients were re-evaluated at the end of growth (T2), about 8.5 years after the end of the treatment (mean age, 18.6±2.0 years). Sixteen subjects with untreated class III malocclusion comprised the control group. Mandibular shape changes were analysed on the lateral cephalograms of the subjects of both groups by means of thin-plate spline (TPS) analysis. Procrustes average mandibular configurations were subjected to TPS analysis by means of both cross-sectional between-group comparisons at T1 and at T2 and longitudinal within-group comparisons. Statistical analysis of shape differences was performed using a generalized Goodall F test. In the long term, the treated group exhibited a significant upward and forward direction of condylar growth. On the contrary, untreated class III subjects showed an upward and backward direction of condylar growth associated with a downward and forward deformation of the mandibular symphysis. Limitations are related to the small sample size of both treated and control groups and to the retrospective nature of the study. Early treatment of class III malocclusion with RME and FM is able to produce significant and favourable long-term mandibular shape changes characterized by an anterior morphogenetic rotation. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Post-operative Stability After Bimaxillary Surgery in Patients with Facial Asymmetry: Comparison of Differences Among Different Original Skeletal Class Patterns.

Science.gov (United States)

Matsushita, Kazuhiro; Inoue, Nobuo; Yamaguchi, Hiro-O; Mikoya, Tadashi; Tei, Kanchu

2015-09-01

When improving jaw deformity by two-jaw surgery, we are of the opinion from our clinical experience that a certain degree of undercorrection is occasionally beneficial from the perspective of stability. Functional deterioration is not always seen with undercorrection. We conducted this retrospective study to assess post-operative stability in patients with facial asymmetry, with the aim of both clarifying differences between the original three skeletal class patterns, and confirming the efficacy of surgery performed on the basis of our concept. All patients received optimal orthognathic treatment before and after surgery. Surgery was performed by our concept that undercorrection is not always bad. Nineteen patients were enrolled, and separated into three skeletal classes according to the ANB angle, because of the difference of the treatment modalities between them. Evaluations were performed by cephalometric measurements taken at least two-year post-operatively. Transverse occlusal cant, chin deviation, point A, point B, overjet and overbite were assessed. In all patients, transverse occlusal cant improved to stability of patients with facial asymmetry was achieved. Undercorrection is thus by no means problematic from the clinical perspective of stability and our concept of approach appears valid.

Risk of cesarean delivery among pregnant women with class III obesity.

Science.gov (United States)

Borghesi, Yves; Labreuche, Julien; Duhamel, Alain; Pigeyre, Marie; Deruelle, Philippe

2017-02-01

To identify factors associated with cesarean delivery among women with class III obesity attempting vaginal delivery. In a retrospective study, medical charts were reviewed for women aged 18 years or older with a singleton pregnancy of at least 37 weeks and a body mass index (calculated as weight in kilograms divided by the square of height in meters) of 40 or higher who were eligible to attempt vaginal delivery at a maternity hospital in Lille, France, between 1999 and 2012. Among 345 eligible women, 301 (87.2%) attempted vaginal delivery; 211 (70.1%) were successful and 90 (29.9%) delivered by cesarean. The frequency of nulliparity was higher among those undergoing cesarean after a trial of labor (64 [71.1%]) than among those who delivered vaginally (57 [27.0%]; Pcesarean (61 [67.8%] vs 96 [45.5%]; Pcesarean among women attempting vaginal delivery (odds ratio [OR] 2.30, 95% confidence interval [CI] 1.25-4.22), whereas history of vaginal delivery was protective (OR 0.08, 95% CI 0.04-0.17). Nulliparous women with class III obesity attempting a vaginal delivery should be warned of the high risk of cesarean delivery, especially if they require induction. © 2016 International Federation of Gynecology and Obstetrics.

Intravenous Vancomycin Associated With the Development of Nephrotoxicity in Patients With Class III Obesity.

Science.gov (United States)

Choi, Yookyung Christy; Saw, Stephen; Soliman, Daniel; Bingham, Angela L; Pontiggia, Laura; Hunter, Krystal; Chuang, Linda; Siemianowski, Laura A; Ereshefsky, Benjamin; Hollands, James M

2017-11-01

A consensus statement recommends initial intravenous (IV) vancomycin dosing of 15-20 mg/kg every 8- 24 hours, with an optional 25- to 30-mg/kg loading dose. Although some studies have shown an association between weight and the development of vancomycin-associated nephrotoxicity, results have been inconsistent. To evaluate the correlation between incidence of nephrotoxicity associated with weight-based IV vancomycin dosing strategies in nonobese and obese patients. This retrospective cohort study evaluated hospitalized adult patients admitted who received IV vancomycin. Patients were stratified into nonobese (body mass index [BMI] obesity class I and II (BMI 30-39.9kg/m 2 ), and obesity class III (BMI≥40 kg/m 2 ) groups; patients who were overweight but not obese were excluded. Incidence of nephrotoxicity and serum vancomycin trough concentrations were evaluated. Of a total of 62 documented cases of nephrotoxicity (15.1%), 13 (8.7%), 23 (14.3%), and 26 (26.3%) cases were observed in nonobese, obesity class I and II, and obesity class III groups, respectively ( P=0.002). Longer durations of therapy ( P20 mg/L ( Pobesity were 3-times as likely to develop nephrotoxicity when compared with nonobese patients (odds ratio [OR]=2.99; CI=1.12-7.94) and obesity class I and II patients (OR=3.14; CI=1.27-7.75). Obesity and other factors are associated with a higher risk of vancomycin-associated nephrotoxicity.

Cardiac, Skeletal, and smooth muscle mitochondrial respiration

DEFF Research Database (Denmark)

Park, Song-Young; Gifford, Jayson R; Andtbacka, Robert H I

2014-01-01

, skeletal, and smooth muscle was harvested from a total of 22 subjects (53±6 yrs) and mitochondrial respiration assessed in permeabilized fibers. Complex I+II, state 3 respiration, an index of oxidative phosphorylation capacity, fell progressively from cardiac, skeletal, to smooth muscle (54±1; 39±4; 15......±1 pmol•s(-1)•mg (-1), prespiration rates were normalized by CS (respiration...... per mitochondrial content), oxidative phosphorylation capacity was no longer different between the three muscle types. Interestingly, Complex I state 2 normalized for CS activity, an index of non-phosphorylating respiration per mitochondrial content, increased progressively from cardiac, skeletal...

Retrospective 25-year follow-up of treatment outcomes in Angle Class III patients : Success versus failure.

Science.gov (United States)

Wendl, Brigitte; Kamenica, A; Droschl, H; Jakse, N; Weiland, F; Wendl, T; Wendl, M

2017-03-01

Despite recommendations for early treatment of hereditary Angle Class III syndrome, late pubertal growth may cause a relapse requiring surgical intervention. This study was performed to identify predictors of successful Class III treatment. Thirty-eight Class III patients treated with a chincup were retrospectively analyzed. Data were collected from the data archive, cephalograms, and casts, including pretreatment (T0) and posttreatment (T1) data, as well as long-term follow-up data collected approximately 25 years after treatment (T2). Each patient was assigned to a success or a failure group. Data were analyzed based on time (T0, T1, T2), deviations from normal (Class I), and prognathism types (true mandibular prognathism, maxillary retrognathism, combined pro- and retrognathism). Compared to Class I normal values, the data obtained in both groups yielded 11 significant parameters. The success group showed values closer to normal at all times (T0, T1, T2) and vertical parameters decreased from T0 to T2. The failure group showed higher values for vertical and horizontal mandibular growth, as well as dentally more protrusion of the lower anterior teeth and more negative overjet at all times. In adittion, total gonial and upper gonial angle were higher at T0 and T1. A prognostic score-yet to be evaluated in clinical practice-was developed from the results. The failure group showed greater amounts of horizontal development during the years between T1 and T2. Treatment of true mandibular prognathism achieved better outcomes in female patients. Cases of maxillary retrognathism were treated very successfully without gender difference. Failure was clearly more prevalent, again without gender difference, among the patients with combined mandibular prognathism and maxillary retrognathism. Crossbite situations were observed in 44% of cases at T0. Even though this finding had been resolved by T1, it relapsed in 16% of the cases by T2. The failure rate increased in cases of

Assessment of the changes in quality of life of patients with class II and III deformities during and after orthodontic-surgical treatment.

Science.gov (United States)

Baherimoghaddam, T; Tabrizi, R; Naseri, N; Pouzesh, A; Oshagh, M; Torkan, S

2016-04-01

The aim of this longitudinal study was to assess and compare the oral health-related quality of life (OHRQoL) of patients with class II and III deformities during and after orthodontic-surgical treatment. Thirty class III and 28 class II patients were evaluated at baseline (T0), just prior to surgery (T1), at 6 months after surgery (T2), and at 12 months after debonding (T3). OHRQoL was assessed using the Oral Health Impact Profile (OHIP-14). Friedman two-way analysis of variance and the Wilcoxon signed-rank test were performed to compare the relative changes in OHRQoL during treatment. Significant changes in the overall OHIP-14 scores were observed during and after orthodontic-surgical treatment in both groups. During the pre-surgical stage, psychological discomfort and psychological disability decreased in class III patients, and class II patients experienced a significant deterioration in psychological discomfort during the same period. Six months after surgery, patients in both groups showed improvements in psychological discomfort, social disability, and handicap. Physical disability and functional limitation showed further improvement at 12 months after debonding in class II patients. This study reaffirms that orthodontic-surgical treatment has a significant effect on the OHRQoL of class III and class II patients. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

The influence of INS VNTR class III allele on auxological parameters, glucose, insulin, lipids, and adipocytokines secretion in prepubertal children born small for gestational age.

Science.gov (United States)

Stawerska, Renata; Szałapska, Małgorzata; Borowiec, Maciej; Antosik, Karolina; Młynarski, Wojciech; Lewiński, Andrzej

2016-01-01

The insulin gene variable number of tandem repeats (INS VNTR) class III allele has been implicated in lower birth weight, obesity, and insulin resistance. We assessed its influence on birth weight in the Polish population and on the current body mass and metabolic profile in prepubertal children born small for gestational age (SGA). DNA for genotyping of INS VNTR was available for 123 subjects born SGA and 132 born appropriate for gestational age (AGA). We identified two alleles: class I and class III. Next, in 112 prepubertal (aged: 6.8 ± 1.38 years) SGA children, the auxological measurements, fasting serum C-peptide, triglycerides, cholesterol, ghrelin, leptin, adiponectin, resistin, cortisol, and insulin-like growth factor type I (IGF-I) concentrations, as well as glucose and insulin during oral glucose tolerance test (OGTT), were assessed and insulin resistance indices were calculated. The results were analysed depending on INS VNTR variants. The occurrence of individual INS VNTR variants were similar in the SGA and AGA groups. In prepubertal SGA children, we did not observe any statistical differences as regards birth weight, body mass, lipids, or adipocytokine concentrations among I/I, I/III, and III/III class groups. The concentration of insulin in 120' of OGTT was significantly higher in class III homozygous than in class I homozygous individuals. Variant INS VNTR class III was shown not to be associated in any essential way with birth weight in the Polish population. Among prepubertal SGA children, the presence of INS VNTR class III is related to higher insulin secretion during OGTT. (Endokrynol Pol 2016; 67 (6): 585-591).

40 CFR 147.2200 - State-administered program-Class I, III, IV, and V wells.

Science.gov (United States)

2010-07-01

... AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION... administered by the Railroad Commission of Texas. A program revision application for Class III brine mining..._regulations/ibr_locations.html. (1) Texas Statutory and Regulatory Requirements Applicable to the Underground...

Prognostic effect of symptomatic extracranial lesions on survival of recursive partitioning analysis Class III brain metastatic patients treated with stereotactic radiotherapy

Directory of Open Access Journals (Sweden)

Xiu-Jun Chen

2016-01-01

Conclusion: The presence of SELs was a negative prognosis factor for the survival of RPA Class III brain metastatic patients. If RPA Class III brain metastatic patients were without SELs, SRT may be a reasonable treatment option, but if they had SELs, SRT may not be a reasonable treatment due to the short overall survival time and KDT.

Class III Malocclusion Surgical-Orthodontic Treatment

Directory of Open Access Journals (Sweden)

Bruna Alves Furquim

2014-01-01

Full Text Available The aim of the present case report is to describe the orthodontic-surgical treatment of a 17-year-and-9-month-old female patient with a Class III malocclusion, poor facial esthetics, and mandibular and chin protrusion. She had significant anteroposterior and transverse discrepancies, a concave profile, and strained lip closure. Intraorally, she had a negative overjet of 5 mm and an overbite of 5 mm. The treatment objectives were to correct the malocclusion, and facial esthetic and also return the correct function. The surgical procedures included a Le Fort I osteotomy for expansion, advancement, impaction, and rotation of the maxilla to correct the occlusal plane inclination. There was 2 mm of impaction of the anterior portion of the maxilla and 5 mm of extrusion in the posterior region. A bilateral sagittal split osteotomy was performed in order to allow counterclockwise rotation of the mandible and anterior projection of the chin, accompanying the maxillary occlusal plane. Rigid internal fixation was used without any intermaxillary fixation. It was concluded that these procedures were very effective in producing a pleasing facial esthetic result, showing stability 7 years posttreatment.

Orthodontic decompensation in class III patients by means of distalization of upper molars.

Science.gov (United States)

Carlos, Villegas B; Giovanni, Oberti; Diego, Rey; Angela, Sierra; Baccetti, Tiziano

2009-01-01

Pre-surgical orthodontic treatments have the objective of establishing harmony between the dental arches by moving the teeth to ideal positions in relation to their bony bases, in order to achieve adequate antero-posterior occlusal and transverse relationships at the moment of surgery. Among the typical requirements in terms of dental compensations presented by Class III patients that require surgery, the inclination of anterior teeth must be changed in most cases by proclination of the lower incisors and retroclination of upper incisors. To achieve the inclination of the upper incisors, many different alternatives have been proposed, such as inter-proximal reduction, extractions, or distalization of upper molars, which has not been widely reported in the literature as a means to decompensate Class III malocclusion prior to surgery. This article describes the Bone Supported Pendulum (BSP) as an efficient therapeutic option to distalize molars through the use of an appliance stabilized to the palate by mini-implants, thus avoiding extractions and providing good interdigitation and coordination of the dental arches.

Cardiac resynchronization induces major structural and functional reverse remodeling in patients with New York Heart Association class I/II heart failure

DEFF Research Database (Denmark)

St John Sutton, Martin; Ghio, Stefano; Plappert, Ted

2009-01-01

BACKGROUND: Cardiac resynchronization therapy (CRT) improves LV structure, function, and clinical outcomes in New York Heart Association class III/IV heart failure with prolonged QRS. It is not known whether patients with New York Heart Association class I/II systolic heart failure exhibit left...... ventricular (LV) reverse remodeling with CRT or whether reverse remodeling is modified by the cause of heart failure. METHODS AND RESULTS: Six hundred ten patients with New York Heart Association class I/II heart failure, QRS duration > or =120 ms, LV end-diastolic dimension > or =55 mm, and LV ejection...... reduction in LV end-diastolic and end-systolic volume indexes and a 3-fold greater increase in LV ejection fraction in patients with nonischemic causes of heart failure. CONCLUSIONS: CRT in patients with New York Heart Association I/II resulted in major structural and functional reverse remodeling at 1 year...

Biowaiver extension potential to BCS Class III high solubility-low permeability drugs: bridging evidence for metformin immediate-release tablet.

Science.gov (United States)

Cheng, Ching-Ling; Yu, Lawrence X; Lee, Hwei-Ling; Yang, Chyun-Yu; Lue, Chang-Sha; Chou, Chen-Hsi

2004-07-01

The biopharmaceutics classification system (BCS) allows biowaiver for rapid dissolving immediate-release (IR) products of Class I drugs (high solubility and high permeability). The possibility of extending biowaivers to Class III high solubility and low permeability drugs is currently under scrutiny. In vivo bioequivalence data of different formulations of Class III drugs would support such an extension. The objective of this work was to demonstrate the bioequivalence of two marketed IR tablet products of a Class III drug, metformin hydrochloride, that are rapidly dissolving and have similar in vitro dissolution profiles. The effect of race on the systemic exposure of metformin was also explored. A randomized, open-label, two-period crossover study was conducted in 12 healthy Chinese male volunteers. Each subject received a single-dose of 500 mg of each product after an overnight fasting. The plasma concentrations of metformin were followed for 24 h. No significant formulation effect was found for the bioequivalence metrics: areas under concentration-time curve (AUC0-t, AUC0-infinity) and maximal concentration (Cmax). The 90% confidence intervals for the ratio of means were found within the acceptance range of 80-125% for the log-transformed data. Based on these results, it was concluded that the two IR products are bioequivalent. The pharmacokinetic parameters of metformin in Chinese for both products were similar and were in good agreement with those reported for metformin IR tablets in other ethnic populations. This study serves as an example for supporting biowaiver for BCS Class III drugs.

Comparison of Natural Head Position in Different Anteroposterior Malocclusions

Directory of Open Access Journals (Sweden)

Zohreh Hedayati

2013-01-01

Full Text Available Objective: The facial esthetics after orthodontic treatment and orthognathic surgery may be affected by the patient’s natural head position. The purpose of this study was to evaluate the natural head position for the three skeletal classes of malocclusion.Materials and Methods: Our sample consisted of 102 lateral cephalometric radiographs of patients aged 15 to 18 years; class I (n=32, class II (n=40 and class III (n=30. Nine landmarks of the craniofacial skeleton and three landmarks of the cervical vertebrae were determined. Variables consisted of two angles for cervical posture (OPT/Hor and CVT/Hor, three angles for craniofacial posture (SN/Ver, PNS-ANS/Ver, and ML/Ver and five for craniofacial angulation (SN/OPT, SN/CVT, PNS-ANS/OPT, PNS-ANS/CVT, ML/CVT. The data were analyzed statistically using ANOVA and post hoc tests.Results: PNS-ANS/Ver and SN/Ver differed significantly (p<0.05 among the three groups. There were no significant differences between class I and class II malocclusions for the indicator angles of cranial posture except for ML/Ver. The SN/CVT was significantly different for class I compared to class III patients. A head posture camouflaging the underlying skeletal class III was observed in our population.Conclusion: A more forward head posture was observed in skeletal class III participants compared to skeletal class I and II and that class III patients tended to incline their head more ventral compared to class I participants. These findings may have implications for the amount of jaw movements during surgery particularly in patients with a class III malocclusion

Perceived changes by peer group of social impact associated with combined orthodontic-surgical correction of class III malocclusion.

Science.gov (United States)

Jesani, Aliza; DiBiase, Andrew T; Cobourne, Martyn T; Newton, Timothy

2014-09-01

Whereas the psychosocial benefits of orthognathic treatment for the individual patient are established, there is little data relating to social perceptions in relation to changes in facial appearance as a result of combined orthodontic and orthognathic treatment. This study aimed to investigate the social impact of combined orthodontic-orthognathic surgical correction for class III malocclusion in Caucasian subjects. This cross-sectional study compared perceptions of facial appearance prior to and after orthognathic correction of class III malocclusion. Eighty undergraduate students were shown photographs of four Caucasian subjects (2 male and 2 female) pre- and post-orthognathic class III correction. Observers were asked to rate these subjects in relation to four different outcomes: (i) social competence (SC); (ii) intellectual ability (IA); (iii) psychological adjustment (PA); (iv) attractiveness. A mixed-model analysis of variance (ANOVA) was calculated to determine the effect of each variable. Statistically significant differences were found in ratings of the same face before and after treatment. After treatment, faces were rated as more psychologically adjusted, more sociable, more likely to be successful and more attractive; with the mean psychological adjustment rating being associated with the most change (before treatment=8.06 [SD 2.30]; after treatment=6.64 [SD 2.03], t=2.04, pclass III malocclusion in Caucasians, individuals are rated by young adults as being better adjusted both psychologically and socially, more likely to be successful and more attractive. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ehrlichia secretes Etf-1 to induce autophagy and capture nutrients for its growth through RAB5 and class III phosphatidylinositol 3-kinase.

Science.gov (United States)

Lin, Mingqun; Liu, Hongyan; Xiong, Qingming; Niu, Hua; Cheng, Zhihui; Yamamoto, Akitsugu; Rikihisa, Yasuko

2016-11-01

Ehrlichia chaffeensis is an obligatory intracellular bacterium that causes a potentially fatal emerging zoonosis, human monocytic ehrlichiosis. E. chaffeensis has a limited capacity for biosynthesis and metabolism and thus depends mostly on host-synthesized nutrients for growth. Although the host cell cytoplasm is rich with these nutrients, as E. chaffeensis is confined within the early endosome-like membrane-bound compartment, only host nutrients that enter the compartment can be used by this bacterium. How this occurs is unknown. We found that ehrlichial replication depended on autophagy induction involving class III phosphatidylinositol 3-kinase (PtdIns3K) activity, BECN1 (Beclin 1), and ATG5 (autophagy-related 5). Ehrlichia acquired host cell preincorporated amino acids in a class III PtdIns3K-dependent manner and ehrlichial growth was enhanced by treatment with rapamycin, an autophagy inducer. Moreover, ATG5 and RAB5A/B/C were routed to ehrlichial inclusions. RAB5A/B/C siRNA knockdown, or overexpression of a RAB5-specific GTPase-activating protein or dominant-negative RAB5A inhibited ehrlichial infection, indicating the critical role of GTP-bound RAB5 during infection. Both native and ectopically expressed ehrlichial type IV secretion effector protein, Etf-1, bound RAB5 and the autophagy-initiating class III PtdIns3K complex, PIK3C3/VPS34, and BECN1, and homed to ehrlichial inclusions. Ectopically expressed Etf-1 activated class III PtdIns3K as in E. chaffeensis infection and induced autophagosome formation, cleared an aggregation-prone mutant huntingtin protein in a class III PtdIns3K-dependent manner, and enhanced ehrlichial proliferation. These data support the notion that E. chaffeensis secretes Etf-1 to induce autophagy to repurpose the host cytoplasm and capture nutrients for its growth through RAB5 and class III PtdIns3K, while avoiding autolysosomal killing.

Chance findings in skeletal radiology; Zufallsbefunde in der Skelettradiologie

Energy Technology Data Exchange (ETDEWEB)

Freyschmidt, Juergen [Beratungsstelle und Referenzzentrum fuer Osteoradiologie, Bremen (Germany)

2016-08-01

The book on chance findings in skeletal radiology covers the following issues: Part (I): Introduction - what are chance findings? Part (II); change findings under different radiological modalities: most frequent skeletal radiological change findings: scintiscanning, radiography and CT, MRT, PET and PET/CT. Part (III): case studies: skull; spinal cord; shoulder/pectoral girdle, chest; pelvis and hip joints; upper extremities; lower extremities.

Class III malocclusion treated with distalization of the mandibular dentition with miniscrew anchorage: A 2-year follow-up.

Science.gov (United States)

Chen, Kun; Cao, Yang

2015-12-01

This case report describes the orthodontic camouflage treatment for a 16-year-old Chinese girl with a Class III malocclusion. The treatment included extractions of the mandibular second molars, fixed appliance therapy, and miniscrew-aided mandibular arch distalization. Pretreatment, posttreatment, and 2-year follow-up records are shown. The anterior negative overjet and the Class III molar and canine relationships were corrected. The patient's facial profile was greatly improved. The mandibular third molars erupted into the second molar spaces, with acceptable intercuspation with the maxillary dentition. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Corticotomy-assisted orthodontic camouflage in a class III adult patient with a severe transverse discrepancy.

Science.gov (United States)

Gracco, Antonio; Finotti, Marco; Bruno, Giovanni; de Stefani, Alberto

2018-04-06

A 25-year-old man presented with a maxillary transverse discrepancy, posterior cross bite, anterior open bite, molar and canine class III. Treatment included a corticotomy in the upper lateral and posterior teeth, a palatal expansor and a sectional archwire to assist the expansion. The following treatment phase included bonding with Incognito System lingual appliance, interproximal reduction to solve the crowding and bite blocks to control the verticality. Two months after the bonding intermaxillary class III elastics were used to solve the sagittal discrepancy and eight months after the bonding vertical elastics were used in order to solve the anterior open bite until the end of the treatment. A Boston splint was applied for the upper arch, an essix splint was applied for the lower arch. The patient compliance was an essential aspect in the success of the orthodontic treatment. Copyright © 2018. Published by Elsevier Masson SAS.

Arts and Crafts Classes in Years I–III, Based on Methods Featuring Pupils’ Practical Activities

OpenAIRE

Piwowarska, Ewa

2016-01-01

The issue to be analysed here concerns teachers’ planning of arts and crafts classes in Years I–III, with specific reference to methods featuring pupils’ practical activities. A theoretical part briefly presents the concepts involved in teaching a subject that was initially defined as drawing, then as arts and crafts education, and finally as arts and crafts classes. It points out the factors that influence the process of stimulating pupils’ artistic activities. The technique used in the cour...

Radiographic assessment of lower third molar eruption in different anteroposterior skeletal patterns and age-related groups.

Science.gov (United States)

Jakovljevic, Aleksandar; Lazic, Emira; Soldatovic, Ivan; Nedeljkovic, Nenad; Andric, Miroslav

2015-07-01

To analyze radiographic predictors for lower third molar eruption among subjects with different anteroposterior skeletal relations and of different age groups. In total, 300 lower third molars were recorded on diagnostic digital orthopantomograms (DPTs) and lateral cephalograms (LCs). The radiographs were grouped according to sagittal intermaxillary angle (ANB), subject age, and level of lower third molar eruption. The DPT was used to analyze retromolar space, mesiodistal crown width, space/width ratio, third and second molar angulation (α, γ), third molar inclination (β), and gonion angle. The LC was used to determine ANB, angles of maxillar and mandibular prognathism (SNA, SNB), mandibular plane angle (SN/MP), and mandibular lengths. A logistic regression model was created using the statistically significant predictors. The logistic regression analysis revealed a statistically significant impact of β angle and distance between gonion and gnathion (Go-Gn) on the level of lower third molar eruption (P third molar impaction rate was significantly higher in the adult subgroup with the Class II (62.3%) compared with Class III subjects (31.7%; P third molar eruption were measured in Class III subjects. For valid estimation of mandibular third molar eruption, certain linear and angular measures (β angle, Go-Gn), as well as the size of the retromolar space, need to be considered.

Localisation of deformations of the midfacial complex in subjects with class III malocclusions employing thin-plate spline analysis.

Science.gov (United States)

Singh, G D; McNamara, J A; Lozanoff, S

1997-11-01

This study determines deformations of the midface that contribute to a class III appearance, employing thinplate spline analysis. A total of 135 lateral cephalographs of prepubertal children of European-American descent with either class III malocclusions or a class I molar occlusion were compared. The cephalographs were traced and checked, and 7 homologous landmarks of the midface were identified and digitised. The data sets were scaled to an equivalent size and subjected to Procrustes analysis. These statistical tests indicated significant differences (P spline analysis indicated that both affine and nonaffine transformations contribute towards the total spline for the averaged midfacial configuration. For nonaffine transformations, partial warp 3 had the highest magnitude, indicating the large scale deformations of the midfacial configuration. These deformations affected the palatal landmarks, and were associated with compression of the midfacial complex in the anteroposterior plane predominantly. Partial warp 4 produced some vertical compression of the posterior aspect of the midfacial complex whereas partial warps 1 and 2 indicated localised shape changes of the maxillary alveolus region. large spatial-scale deformations therefore affect the midfacial complex in an anteroposterior axis, in combination with vertical compression and localised distortions. These deformations may represent a developmental diminution of the palatal complex anteroposteriorly that, allied with vertical shortening of midfacial height posteriorly, results in class III malocclusions with a retrusive midfacial profile.

40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part 53... Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53—Illustration...

Skeletal muscle abnormalities and exercise capacity in adults with a Fontan circulation.

Science.gov (United States)

Cordina, Rachael; O'Meagher, Shamus; Gould, Haslinda; Rae, Caroline; Kemp, Graham; Pasco, Julie A; Celermajer, David S; Singh, Nalin

2013-10-01

The peripheral muscle pump is key in promoting cardiac filling during exercise, especially in subjects who lack a subpulmonary ventricle (the Fontan circulation). A muscle-wasting syndrome exists in acquired heart failure but has not been assessed in Fontan subjects. We sought to investigate whether adults with the Fontan circulation exhibit reduced skeletal muscle mass and/or metabolic abnormalities. Sixteen New York Heart Association Class I/II Fontan adults (30±2 years) underwent cardiopulmonary exercise testing and lean mass quantification with dual x-ray absorptiometry (DXA); eight had calf muscle (31)P magnetic resonance spectroscopy as did eight healthy age-matched and sex-matched controls. DXA results were compared with Australian reference data. Single tertiary referral centre. Peak VO2 was 1.9±0.1 L/min (66±3% of predicted values). Skeletal muscle mass assessed by relative appendicular lean mass index was significantly reduced compared with age-matched and sex-matched reference values (Z-score -1.46±0.22, pskeletal muscle mass correlated with poorer VO2 max (r=0.67, p=0.004). Overall, skeletal muscle mass T-score (derived from comparison with young normal reference mean) was -1.47±0.21; 4/16 Fontan subjects had sarcopenic range muscle wasting (T-score Muscle aerobic capacity, measured by the rate constant (k) of postexercise phosphocreatine resynthesis, was significantly impaired in Fontan adults versus controls (1.48±0.13 vs 2.40±0.33 min(-1), p=0.02). Fontan adults have reduced skeletal muscle mass and intrinsic muscle metabolic abnormalities.

THERAPEUTIC DIFFICULTIES IN ACHIEVEMENT OF OPTIMAL ROOT COVERAGE AND AESTHETIC IN CLASS III GINGIVAL RECESSION.

Directory of Open Access Journals (Sweden)

Christina Popova

2013-07-01

Full Text Available The width of the attached gingiva is defined as a distance between the depth of the gingival sulcus or gingival/periodontal pocket to the mucogingival junction. Authors suggest that a minimal amount of attached gingiva is necessary to ensure the gingival health. When the buccal bone plate and gingival tissues are thin and the position of the tooth is too vestibular gingival margin often displaces apically, and gingival recession develops. In the presence of gingival recession and reduced vestibular depth oral hygiene procedures are embarrassed.The definition of class III gingival recession is marginal lack of tissue extended to/or beyond the mucogingival junction with bone and soft tissue loss interdentally or malpositioning of the tooth.Prognosis for class III and IV gingival recession is that only partial coverage can be expected after root coverage procedures - FGG (free gingival graft or connective tissue graft (CTG. Adjunctive surgical techniques would be helpful to achieve better aesthetic outcomes.

Association between class III obesity (BMI of 40-59 kg/m2 and mortality: a pooled analysis of 20 prospective studies.

Directory of Open Access Journals (Sweden)

Cari M Kitahara

2014-07-01

Full Text Available The prevalence of class III obesity (body mass index [BMI]≥40 kg/m2 has increased dramatically in several countries and currently affects 6% of adults in the US, with uncertain impact on the risks of illness and death. Using data from a large pooled study, we evaluated the risk of death, overall and due to a wide range of causes, and years of life expectancy lost associated with class III obesity.In a pooled analysis of 20 prospective studies from the United States, Sweden, and Australia, we estimated sex- and age-adjusted total and cause-specific mortality rates (deaths per 100,000 persons per year and multivariable-adjusted hazard ratios for adults, aged 19-83 y at baseline, classified as obese class III (BMI 40.0-59.9 kg/m2 compared with those classified as normal weight (BMI 18.5-24.9 kg/m2. Participants reporting ever smoking cigarettes or a history of chronic disease (heart disease, cancer, stroke, or emphysema on baseline questionnaires were excluded. Among 9,564 class III obesity participants, mortality rates were 856.0 in men and 663.0 in women during the study period (1976-2009. Among 304,011 normal-weight participants, rates were 346.7 and 280.5 in men and women, respectively. Deaths from heart disease contributed largely to the excess rates in the class III obesity group (rate differences = 238.9 and 132.8 in men and women, respectively, followed by deaths from cancer (rate differences = 36.7 and 62.3 in men and women, respectively and diabetes (rate differences = 51.2 and 29.2 in men and women, respectively. Within the class III obesity range, multivariable-adjusted hazard ratios for total deaths and deaths due to heart disease, cancer, diabetes, nephritis/nephrotic syndrome/nephrosis, chronic lower respiratory disease, and influenza/pneumonia increased with increasing BMI. Compared with normal-weight BMI, a BMI of 40-44.9, 45-49.9, 50-54.9, and 55-59.9 kg/m2 was associated with an estimated 6.5 (95% CI: 5.7-7.3, 8

Skeletal muscle tissue transcriptome differences in lean and obese female beagle dogs.

Science.gov (United States)

Grant, R W; Vester Boler, B M; Ridge, T K; Graves, T K; Swanson, K S

2013-08-01

Skeletal muscle is a large and insulin-sensitive tissue that is an important contributor to metabolic homeostasis and energy expenditure. Many metabolic processes are altered with obesity, but the contribution of muscle tissue in this regard is unclear. A limited number of studies have compared skeletal muscle gene expression of lean and obese dogs. Using microarray technology, our objective was to identify genes and functional classes differentially expressed in skeletal muscle of obese (14.6 kg; 8.2 body condition score; 44.5% body fat) vs. lean (8.6 kg; 4.1 body condition score; 22.9% body fat) female beagle adult dogs. Alterations in 77 transcripts was observed in genes pertaining to the functional classes of signaling, transport, protein catabolism and proteolysis, protein modification, development, transcription and apoptosis, cell cycle and differentiation. Genes differentially expressed in obese vs. lean dog skeletal muscle indicate oxidative stress and altered skeletal muscle cell differentiation. Many genes traditionally associated with lipid, protein and carbohydrate metabolism were not altered in obese vs. lean dogs, but genes pertaining to endocannabinoid metabolism, insulin signaling, type II diabetes mellitus and carnitine transport were differentially expressed. The relatively small response of skeletal muscle could indicate that changes are occurring at a post-transcriptional level, that other tissues (e.g., adipose tissue) were buffering skeletal muscle from metabolic dysfunction or that obesity-induced changes in skeletal muscle require a longer period of time and that the length of our study was not sufficient to detect them. Although only a limited number of differentially expressed genes were detected, these results highlight genes and functional classes that may be important in determining the etiology of obesity-induced derangement of skeletal muscle function. © 2013 The Authors, Animal Genetics © 2013 Stichting International Foundation

Inclinação de cabeça durante a mastigação habitual nas deformidades dentofaciais classe II e III Head inclination during habitual chewing in the presence of class II and III dentofacial deformities

Directory of Open Access Journals (Sweden)

Marcela Ralin de Carvalho Deda

2011-04-01

Full Text Available OBJETIVO: este estudo investiga a diferença entre grupos com deformidade dentofacial (padrão classe II e classe III, em relação à preferência mastigatória referida e inclinação de cabeça durante a mastigação, assim como predomínio intra-grupo de cada um desses aspectos, comparativamente a um grupo controle. MÉTODOS: participaram deste estudo, voluntariamente, 25 pacientes (entre 18 e 35 anos. Doze pacientes com diagnóstico de deformidade dentofacial classe II e 13 pacientes com o diagnóstico de classe III esquelética e 10 voluntários, com equivalência em sexo e idade ao grupo de deformidade, formando o grupo controle. Os voluntários da pesquisa foram questionados sobre a existência de um lado de preferência mastigatória. Em seguida foram filmados durante a mastigação habitual de um biscoito maizena e através das imagens captadas, a postura de cabeça pôde ser analisada. RESULTADOS: não houve diferença entre os grupos em relação à preferência mastigatória referida, entretanto os grupos com deformidades dentofaciais apresentaram predomínio significativo de preferência mastigatória referida. Os grupos com deformidade dentofacial apresentaram maior predomínio de inclinação de cabeça durante a mastigação quando comparados ao grupo controle. CONCLUSÃO: indivíduos com deformidade dentofacial podem apresentar uma preferência mastigatória e alteração de postura de cabeça durante a mastigação.PURPOSE: the study was conducted in order to investigate the difference among groups with class II and class III dentofacial deformities regarding reported chewing side preference and head inclination during chewing and to determine the intra-group predominance for these features when compared to a control group. METHODS: twenty-five volunteers aged from 15 to 34 years took part in the study, 12 of them with a diagnosis of class II dentofacial deformity, 13 with class III dentofacial deformity, and 10 control

Orthodontic clockwise rotation of maxillomandibular complex for improving facial profile in late teenagers with Class III malocclusion: A preliminary report

Directory of Open Access Journals (Sweden)

Eric JW Liou

2018-01-01

Full Text Available Objective: Orthodontic camouflage treatments improve occlusion but might worsen facial profile in patients with Class III malocclusion. It has been reported that surgical clockwise rotation of maxillomandibular complex (MMc improves facial profile by reducing chin prominence and chin throat length in patients with Class III malocclusion. The purpose of this report was to illustrate two orthodontic techniques for clockwise rotation of the MMc in late teenagers with Class III malocclusion and preliminarily evaluate their clinical effects. Patients and Methods: Six patients in late teenage with Class III malocclusion were included in this preliminary report. Bite raisers were first placed on the upper molars to open the bite and clockwise rotate the mandible. Intermaxillary elastics were then applied vertically between the upper and lower dentitions in 3 patients for bimaxillary extrusion (Technique-1 or between the upper dentition and the lower temporary anchorage devices (TADs in another 3 patients (Technique-2 for upper dentition extrusion and closure of the anterior open bite. The three-dimensional cone-beam computed tomography images taken before and after orthodontic treatment were superimposed to evaluate the treatment effects of MMc clockwise rotation for both techniques. Results: The Technique-1 extruded the upper and lower dentitions, rotated the mandible clockwise 2.01°, moved chin down 2.98 mm, and back −1.64 mm, although the mandible grew 2.47 mm during the treatment period. The Technique-2 extruded the upper dentition, rotated the mandible clockwise 0.90°, moved chin down 1.78 mm, but slightly forward 0.47 mm due to the mandible grew 2.50 mm and lower dentition was not extruded. Conclusions: The orthodontic clockwise rotation of MMc is an effective technique for orthognathic camouflage. The applications of bite raisers and bimaxillary dentition extrusion could be more effective than single dentition extrusion with TADs in the

Serum myostatin levels are independently associated with skeletal muscle wasting in patients with heart failure.

Science.gov (United States)

Furihata, Takaaki; Kinugawa, Shintaro; Fukushima, Arata; Takada, Shingo; Homma, Tsuneaki; Masaki, Yoshihiro; Abe, Takahiro; Yokota, Takashi; Oba, Koji; Okita, Koichi; Tsutsui, Hiroyuki

2016-10-01

It has been reported that skeletal muscle mass and strength are decreased in patients with heart failure (HF), and HF is associated with both reduced exercise capacity and adverse clinical outcomes. Myostatin has been known as a negative regulator of muscle growth, follistatin as the myostatin antagonist, maintaining tissue homeostasis. We thus determined serum myostatin levels in HF patients and whether they are associated with skeletal muscle wasting. Forty one consecutive HF patients (58±15years old, New York Heart Association class I-III) and 30 age-matched healthy subjects as controls (53±8years old) were studied. Serum myostatin levels were significantly lower in HF patients than controls (18.7±7.4 vs. 23.6±5.2ng/mL, Pmyostatin were significantly associated with the presence of muscle wasting. By multivariate analysis, serum myostatin levels were independently associated with muscle wasting (OR=0.77, 95% CI [0.58, 0.93], P=0.02). Serum myostatin levels were significantly decreased in HF patients and associated with lower extremity muscle wasting, suggesting that myostatin may be an important factor for maintaining skeletal muscle mass and strength in HF. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Skeletal muscle mitochondrial bioenergetics and associations with myostatin genotypes in the Thoroughbred horse.

Science.gov (United States)

Rooney, Mary F; Porter, Richard K; Katz, Lisa M; Hill, Emmeline W

2017-01-01

Variation in the myostatin (MSTN) gene has been reported to be associated with race distance, body composition and skeletal muscle fibre composition in the horse. The aim of the present study was to test the hypothesis that MSTN variation influences mitochondrial phenotypes in equine skeletal muscle. Mitochondrial abundance and skeletal muscle fibre types were measured in whole muscle biopsies from the gluteus medius of n = 82 untrained (21 ± 3 months) Thoroughbred horses. Skeletal muscle fibre type proportions were significantly (p T (C) and the SINE insertion 227 bp polymorphism (I). Evaluation of mitochondrial complex activities indicated higher combined mitochondrial complex I+III and II+III activities in the presence of the C-allele / I allele (p ≤ 0.05). The restoration of complex I+III and complex II+III activities following addition of exogenous coenzyme Q1 (ubiquinone1) (CoQ1) in vitro in the TT/NN (homozygous T allele/homozygous no insertion) cohort indicated decreased coenzyme Q in these animals. In addition, decreased gene expression in two coenzyme Q (CoQ) biosynthesis pathway genes (COQ4, p ≤ 0.05; ADCK3, p ≤ 0.01) in the TT/NN horses was observed. This study has identified several mitochondrial phenotypes associated with MSTN genotype in untrained Thoroughbred horses and in addition, our findings suggest that nutritional supplementation with CoQ may aid to restore coenzyme Q activity in TT/NN horses.

40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM10−2.5 Candidate...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM10â2.5 Candidate Equivalent Methods C Figure C-3 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

Identification of diverse archaeal proteins with class III signal peptides cleaved by distinct archaeal prepilin peptidases

NARCIS (Netherlands)

Szabó, Zalán; Oliveira Stahl, Adriana; Albers, Sonja-V.; Kissinger, Jessica C.; Driessen, Arnold J.M.; Pohlschröder, Mechthild; Pohlschroder, M.

2007-01-01

Most secreted archaeal proteins are targeted to the membrane via a tripartite signal composed of a charged N terminus and a hydrophobic domain, followed by a signal peptidase-processing site. Signal peptides of archaeal flagellins, similar to class III signal peptides of bacterial type IV pilins,

Correlation of Beta Angle with Antero-Posterior Dysplasia Indicators and FMA: An Institution Based Cephalometric Study.

Science.gov (United States)

Singh, Gurinder; Verma, Sanjeev; Singh, Devinder Preet; Yadav, Sumit Kumar; Yadav, Achla Bharti

2016-11-01

Beta angle utilizes three skeletal landmarks - point A, point B, and point C (the apparent axis of the condyle). It is formed between A-B line and point A perpendicular to C-B line. Further this angle indicates the severity and the type of skeletal dysplasia in the sagittal dimension and it changes with the growth pattern of the patient. Hence, it is important to study the dependence of beta angle on the growth pattern. The present study was designed to evaluate the correlation of Beta angle with point A-Nasion-point B (ANB) angle, points A and B to palatal plane (App-Bpp), Wit's appraisal and Maxillary-Mandibular plane angle Bisector (MMB) and Frankfort-Mandibular plane Angle (FMA) in Skeletal Class I, Class II and Class III malocclusion groups. Pre-treatment lateral head cephalo-grams of 120 subjects in age group of 15-25 years were obtained. Three skeletal Class I, Class II and Class III malocclusion groups (40 each) were assorted on the basis of ANB, MMB, App-Bpp, Wit's appraisal and FMA. Analysis of variance (ANOVA) and mean differences were calculated to compare the study groups. Bivariate correlations among different parameters of these groups were obtained. Normal values of beta angle in skeletal Class I group, skeletal Class II group and skeletal Class III group was 31.33±3.25, 25.28±4.28 and 40.93±4.55 respectively. Overall beta angle showed a strong correlation with all parameters of anterio-posterior dysplasia indicators except FMA. Beta angle shows weak correlation with FMA and is not affected by growth pattern/jaw rotation. The normal values are in same range irrespective of the differences in craniofacial morphology.

Maxillary and mandibular contribution to the establishment of class II malocclusion in an adult Lebanese population.

Science.gov (United States)

El Hajj, Nadine; Bassil-Nassif, Nayla; Tauk, Alain; Mouhanna-Fattal, Carole; Bouserhal, Joseph P

2017-12-01

The main aim of this study was to describe the contribution of the maxilla and the mandible to the establishment of a Class II skeletal malocclusion in an adult Lebanese population. Secondary aims were to detect the presence of sex-based dimorphism and to study the influence of the vertical dimension on the Class II skeletal pattern. A sample of 90 adults in skeletal Class II was recruited and equally distributed according to sex and vertical typology. The study describes the skeletal and dentoalveolar cephalometric characteristics of the Class II sample, essentially according to Coben's cephalometric analysis. The total effective depth of the cranial base and the anterior cranial base angle (SN-BaH) were both greater in the Class II sample. In females, the effective depth of the maxilla (Ptm-A) was larger than normal while SNB was smaller. The parameters describing the size and shape of the body of the mandible were significantly different from those of normal subjects. The upper incisors were in a retrusive position, while the axis of the lower incisors was located normally. The mandibular molars had a more distal sagittal position. Hyperdivergent subjects had more significant posterior alveolar growth, a more retrusive mandibular position and smaller mandibular dimensions than the other two vertical sub-groups. The cranial base contributes to the establishment of a Class II malocclusion, and mandibular retrusion cannot be considered as a characteristic shared by all skeletal Class II subjects. Lessening of the absolute length of the mandibular body is the second most frequent etiological factor noted in the Class II sample studied. Most individuals in skeletal Class II have an associated dental Class II malocclusion, and the vertical dimension has an influence on the Class II skeletal pattern. Copyright © 2017 CEO. Published by Elsevier Masson SAS. All rights reserved.

A cephalometric analysis of Class II dentate subjects to establish a formula to determine the occlusal plane in Class II edentate subjects: A neo adjunct.

Science.gov (United States)

Sinha, Nikita; Reddy, K Mahendranadh; Gupta, Nidhi; Shastry, Y M

2017-01-01

Occlusal plane (OP) differs considerably in participants with skeletal Class I and Class II participants. In this study, cephalometrics has been used to help in the determination of orientation of the OP utilizing the nonresorbable bony anatomic landmarks in skeletal Class II participants and an attempt has been made to predict and examine the OP in individuals with skeletal class II jaw relationship. One hundred dentulous participants with skeletal Class II malocclusion who came to the hospital for correcting their jaw relationship participated in the study. Their right lateral cephalogram was taken using standardized procedures, and all the tracings were manually done by a single trained examiner. The cephalograms which were taken for the diagnostic purpose were utilized for the study, and the patient was not exposed to any unnecessary radiation. The numerical values obtained from the cephalograms were subjected to statistical analysis. Pearson's correlation of orientation of the OP in Class II edentulous participants. Pearson's correlation coefficient and linear regression analysis were performed, and a high correlation was found between A2 and (A2 + B2)/(B2 + C2) with " r " value of 0.5. A medium correlation was found between D2 and (D2 + E2)/(E2 + F2) with " r " value of 0.42. The formula obtained for posterior reference frame through linear regression equation was y = 0.018* × +0.459 and the formula obtained for anterior reference frame was y1 = 0.011* × 1 + 0.497. It was hypothesized that by substituting these formulae in the cephalogram obtained from the Class II edentate individual, the OP can be obtained and verified. It was concluded that cephalometrics can be useful in examining the orientation of OP in skeletal Class II participants.

Current and evolving approaches for improving the oral permeability of BCS Class III or analogous molecules.

Science.gov (United States)

Dave, Vivek S; Gupta, Deepak; Yu, Monica; Nguyen, Phuong; Varghese Gupta, Sheeba

2017-02-01

The Biopharmaceutics Classification System (BCS) classifies pharmaceutical compounds based on their aqueous solubility and intestinal permeability. The BCS Class III compounds are hydrophilic molecules (high aqueous solubility) with low permeability across the biological membranes. While these compounds are pharmacologically effective, poor absorption due to low permeability becomes the rate-limiting step in achieving adequate bioavailability. Several approaches have been explored and utilized for improving the permeability profiles of these compounds. The approaches include traditional methods such as prodrugs, permeation enhancers, ion-pairing, etc., as well as relatively modern approaches such as nanoencapsulation and nanosizing. The most recent approaches include a combination/hybridization of one or more traditional approaches to improve drug permeability. While some of these approaches have been extremely successful, i.e. drug products utilizing the approach have progressed through the USFDA approval for marketing; others require further investigation to be applicable. This article discusses the commonly studied approaches for improving the permeability of BCS Class III compounds.

Management of a severe Class III malocclusion with extreme dentoalveolar compensations.

Science.gov (United States)

Nehra, Karan; Sharma, Vineet; Mitra, Rajat

2012-01-01

This case report describes the treatment of a 21-year-old woman with a severe Class III malocclusion, 9-mm anterior crossbite, extremely proclined maxillary anterior incisors associated with decreased buccolingual alveolar width, and a malformed supernumerary tooth. The treatment plan included fixed appliances to align and level the teeth, en masse retraction of maxillary anterior incisors after a labial and palatal corticotomy using temporary anchorage devices, high Le Fort I maxillary osteotomy for maxillary advancement, and bilateral sagittal split osteotomy for mandibular setback. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing. Occlusal stability was excellent in the 1-year follow-up.

Temporomandibular disorders in growing patients after treatment of class II and III malocclusion with orthopaedic appliances: a systematic review.

Science.gov (United States)

Jiménez-Silva, Antonio; Carnevali-Arellano, Romano; Venegas-Aguilera, Matías; Tobar-Reyes, Julio; Palomino-Montenegro, Hernán

2018-05-01

To determine if the use of orthopaedic appliances in growing patients applied to correct Class II and III malocclusion is related to the development of temporomandibular disorders (TMD). A systematic review was conducted between 1960 and July 2017, based on electronic databases: PubMed, Cochrane Library, Embase, Medline, Scopus, EBSCOhost, Scielo, Lilacs and Bireme. Controlled clinical trials (CCTs) and randomized controlled trials (RCTs) were identified. The articles were selected and analyzed by two authors independently. The quality of the evidence was determined according to the guidelines of the Cochrane Risk Bias Assessment Tool and the Cochrane Quality Study Guide. Seven articles were included, four CCTs and three RCTs. The studies were grouped according to malocclusion treatment in (a) class II appliances (n = 4) and (b) class III appliances (n = 3). The quality of evidence was low due to the high risk of bias, independent of the association reported. All studies concluded that the use of orthopaedic appliances would not contribute to the development of TMD. The quality of evidence available is insufficient to establish definitive conclusions, since the studies were very heterogeneous and presented a high risk of bias. However, it is suggested that the use of orthopaedic appliances to correct class II and III malocclusion in growing patients would not be considered as a risk factor for the development of TMD. High-quality RCTs are required to draw any definitive conclusions.

Pseudomonas aeruginosa Exhibits Deficient Biofilm Formation in the Absence of Class II and III Ribonucleotide Reductases Due to Hindered Anaerobic Growth.

Science.gov (United States)

Crespo, Anna; Pedraz, Lucas; Astola, Josep; Torrents, Eduard

2016-01-01

Chronic lung infections by the ubiquitous and extremely adaptable opportunistic pathogen Pseudomonas aeruginosa correlate with the formation of a biofilm, where bacteria grow in association with an extracellular matrix and display a wide range of changes in gene expression and metabolism. This leads to increased resistance to physical stress and antibiotic therapies, while enhancing cell-to-cell communication. Oxygen diffusion through the complex biofilm structure generates an oxygen concentration gradient, leading to the appearance of anaerobic microenvironments. Ribonucleotide reductases (RNRs) are a family of highly sophisticated enzymes responsible for the synthesis of the deoxyribonucleotides, and they constitute the only de novo pathway for the formation of the building blocks needed for DNA synthesis and repair. P. aeruginosa is one of the few bacteria encoding all three known RNR classes (Ia, II, and III). Class Ia RNRs are oxygen dependent, class II are oxygen independent, and class III are oxygen sensitive. A tight control of RNR activity is essential for anaerobic growth and therefore for biofilm development. In this work we explored the role of the different RNR classes in biofilm formation under aerobic and anaerobic initial conditions and using static and continuous-flow biofilm models. We demonstrated the importance of class II and III RNR for proper cell division in biofilm development and maturation. We also determined that these classes are transcriptionally induced during biofilm formation and under anaerobic conditions. The molecular mechanism of their anaerobic regulation was also studied, finding that the Anr/Dnr system is responsible for class II RNR induction. These data can be integrated with previous knowledge about biofilms in a model where these structures are understood as a set of layers determined by oxygen concentration and contain cells with different RNR expression profiles, bringing us a step closer to the understanding of this

Determinants of relative skeletal maturity in South African children.

Science.gov (United States)

Hawley, Nicola L; Rousham, Emily K; Johnson, William; Norris, Shane A; Pettifor, John M; Cameron, Noël

2012-01-01

The variation of skeletal maturity about chronological age is a sensitive indicator of population health. Age appropriate or advanced skeletal maturity is a reflection of adequate environmental and social conditions, whereas delayed maturation suggests inadequate conditions for optimal development. There remains a paucity of data, however, to indicate which specific biological and environmental factors are associated with advancement or delay in skeletal maturity. The present study utilises longitudinal data from the South African Birth to Twenty (Bt20) study to indentify predictors of relative skeletal maturity (RSM) in early adolescence. A total of 244 black South African children (n=131 male) were included in this analysis. Skeletal maturity at age 9/10 years was assessed using the Tanner and Whitehouse III RUS technique. Longitudinal data on growth, socio-economic position and pubertal development were entered into sex-specific multivariable general linear regression models with relative skeletal maturity (skeletal age-chronological age) as the outcome. At 9/10 years of age males showed an average of 0.66 years delay in skeletal maturation relative to chronological age. Females showed an average of 1.00 year delay relative to chronological age. In males, being taller at 2 years (pdetermining the rate of skeletal maturation during childhood independently of current stature. Copyright © 2011 Elsevier Inc. All rights reserved.

Control of lower incisor inclination with a completely customized lingual appliance for dentoalveolar compensation of class III malocclusion.

Science.gov (United States)

Lossdörfer, Stefan; Schwestka-Polly, Rainer; Wiechmann, Dirk

2013-09-01

Bracket slots and orthodontic archwires offering high dimensional precision are needed for fully customized lingual appliances. We aimed to investigate whether high-precision appliances of this type enable dentoalveolar compensation of class III malocclusion so that lower incisor inclination at the end of treatment will closely match the anticipated situation as defined in a pretreatment setup. This retrospective study included a total of 34 consecutive patients who had worn a fully customized lingual appliance to achieve dentoalveolar compensation for class III malocclusion by intermaxillary elastics, or proximal enamel reduction, or extraction of teeth in one or both jaws. Casts fabricated at different points in time were three-dimensionally scanned to analyze how precisely the lower incisor inclinations envisioned in the setup were implemented in clinical practice. Aside from minor deviations of ±3.75°, the lower incisor inclinations were clinically implemented as planned even in patients with major sagittal discrepancies. Treatment goals predefined in a setup of dentoalveolar compensation for class III malocclusion can be very precisely achieved via a customized lingual appliance. Correct planning can prevent undesirable lingual tipping of the lower incisors. This finding should not encourage a more liberal use of dentoalveolar compensation, but it should heighten clinicians' awareness of how essential it is to sufficiently consider the individual anatomy of the dentoalveolar complex during treatment planning.

The Populus Class III HD ZIP, popREVOLUTA, influences cambium initiation and patterning of woody stems

Science.gov (United States)

Marcel Robischon; Juan Du; Eriko Miura; Andrew Groover

2011-01-01

The secondary growth of a woody stem requires the formation of a vascular cambium at an appropriate position and proper patterning of the vascular tissues derived from the cambium. Class III homeodomain-leucine zipper (HD ZIP) transcription factors have been implicated in polarity determination and patterning in lateral organs and primary vascular tissues and in the...

Design specifications for ASME B and PV Code Section III nuclear class 1 piping

International Nuclear Information System (INIS)

Richardson, J.A.

1978-01-01

ASME B and PV Code Section III code regulations for nuclear piping requires that a comprehensive Design Specification be developed for ensuring that the design and installation of the piping meets all code requirements. The intent of this paper is to describe the code requirements, discuss the implementation of these requirements in a typical Class 1 piping design specification, and to report on recent piping failures in operating light water nuclear power plants in the US. (author)

Evaluation of orthognathic surgery on articular disc position and temporomandibular joint symptoms in skeletal class II patients: A Magnetic Resonance Imaging study.

Science.gov (United States)

Firoozei, Gholamreza; Shahnaseri, Shirin; Momeni, Hasan; Soltani, Parisa

2017-08-01

The purpose of orthognathic surgery is to correct facial deformity and dental malocclusion and to obtain normal orofacial function. However, there are controversies of whether orthognathic surgery might have any negative influence on temporomandibular (TM) joint. The purpose of this study was to evaluate the influence of orthognathic surgery on articular disc position and temporomandibular joint symptoms of skeletal CI II patients by means of magnetic resonance imaging. For this purpose, fifteen patients with skeletal CI II malocclusion, aged 19-32 years (mean 23 years), 10 women and 5 men, from the Isfahan Department of Oral and Maxillofacial Surgery were studied. All received LeFort I and bilateral sagittal split osteotomy (BSSO) osteotomies and all patients received pre- and post-surgical orthodontic treatment. Magnetic resonance imaging was performed 1 day preoperatively and 3 month postoperatively. Descriptive statistics and Wilcoxon and Mc-Nemar tests were used for statistical analysis. P surgery (mean=5.74±1.21). After surgery disc position range was 4.36 to 7.40 (mean=5.65±1.06). Statistical analysis proved that although TM disc tended to move anteriorly after BSSO surgery, this difference was not statistically significant ( p valuesurgery does not alter the disc and condyle relationship. Therefore, it has minimal effects on intact and functional TM joint. Key words: Orthognathic surgery, skeletal class 2, magnetic resonance imaging, temporomandibular disc.

Thin-plate spline analysis of treatment effects of rapid maxillary expansion and face mask therapy in early Class III malocclusions.

Science.gov (United States)

Baccetti, T; Franchi, L; McNamara, J A

1999-06-01

An effective morphometric method (thin-plate spline analysis) was applied to evaluate shape changes in the craniofacial configuration of a sample of 23 children with Class III malocclusions in the early mixed dentition treated with rapid maxillary expansion and face mask therapy, and compared with a sample of 17 children with untreated Class III malocclusions. Significant treatment-induced changes involved both the maxilla and the mandible. Major deformations consisted of forward displacement of the maxillary complex from the pterygoid region and of anterior morphogenetic rotation of the mandible, due to a significant upward and forward direction of growth of the mandibular condyle. Significant differences in size changes due to reduced increments in mandibular dimensions were associated with significant shape changes in the treated group.

Localization of nitric oxide synthase in human skeletal muscle

DEFF Research Database (Denmark)

Frandsen, Ulrik; Lopez-Figueroa, M.; Hellsten, Ylva

1996-01-01

The present study investigated the cellular localization of the neuronal type I and endothelial type III nitric oxide synthase in human skeletal muscle. Type I NO synthase immunoreactivity was found in the sarcolemma and the cytoplasm of all muscle fibres. Stronger immunoreactivity was expressed...

Dental and skeletal changes in mild to moderate Class II malocclusions treated by either a Twin-block or Xbow appliance followed by full fixed orthodontic treatment.

Science.gov (United States)

Ehsani, Sayeh; Nebbe, Brian; Normando, David; Lagravere, Manuel O; Flores-Mir, Carlos

2015-11-01

To compare the short-term skeletal and dental effects of two-phase orthodontic treatment including either a Twin-block or an XBow appliance. This was a retrospective clinical trial of 50 consecutive Class II cases treated in a private practice with either a Twin-block (25) or XBow (25) appliance followed by full fixed orthodontic treatment. To factor out growth, an untreated Class II control group (25) was considered. A MANOVA of treatment/observation changes followed by univariate pairwise comparisons showed that the maxilla moved forward less in the treatment groups than in the control group. As for mandibular changes, the corpus length increase was larger in the Twin-block group by 3.9 mm. Dentally, mesial movement of mandibular molars was greater in both treatment groups. Although no distalization of maxillary molars was found in either treatment group, restriction of mesial movement of these teeth was seen in both treatment groups. Both treatment groups demonstrated increased mandibular incisor proclination with larger increases for the XBow group by 3.3°. The Wits value was decreased by 1.6 mm more in the Twin-block group. No sex-related differences were observed. Class II correction using an XBow or Twin-block followed by fixed appliances occurs through a relatively similar combination of dental and skeletal effects. An increase in mandibular incisor inclination for the XBow group and an increased corpus length for the Twin-block group were notable exceptions. No overall treatment length differences were seen.

Effective and Efficient Herbst Appliance Therapy for Skeletal Class II Malocclusion Patient with a Low Degree of Collaboration with the Orthodontic Treatment.

Science.gov (United States)

Souki, Bernardo Quiroga; Bastos, Barbra Duque Costa; Araujo, Luana Fialho Ferro; Moyses-Braga, Wagner Fernando; Pantuzo, Mariele Garcia; Cheib, Paula Loureiro

2015-01-01

The current concept for effective and efficient treatment of skeletal Class II malocclusion prescribes that interceptive approach should be delivered during the pubertal growth stage. However, psychosocial issues and a greater risk of dental trauma are also factors that should be addressed when considering early Class II therapy. This paper reports a case of a patient that sought orthodontic treatment due to aesthetic discomfort with the incisors' protrusion. Two previous treatments failed because patient's collaboration with removable appliances was inadequate. Given his history of no collaboration and because the patient was in the prepubertal stage, it was decided to try a different approach in the third attempt of treatment. Traumatic injury protective devices were used during the prepubertal stage and followed by Herbst appliance and fixed multibrackets therapy during the pubertal stage, resulting in an adequate outcome and long-term stability.

Maintenance of class III trifurcated molars versus implant placement in regenerated extraction sockets: long-term results of 2 cases.

Science.gov (United States)

Zafiropoulos, Gregory-George K; di Prisco, Manuela Occipite; Deli, Giorgio; Hoffmann, Oliver

2011-03-01

Studies to date have reached differing conclusions regarding the long-term prognosis of teeth with class III furcation involvement. Replacement of such teeth with implants could be an alternative. This report compares the treatment outcomes of 2 cases with similar disease progression: 1 treated by implant therapy and 1 maintained with nonsurgical periodontal treatment. Two patients with advanced chronic periodontitis and class III furcation involvement of all molars were treated. Case 1 received a conservative periodontal and antibiotic treatment, followed by 15 years of maintenance. In case 2, the molars were extracted and replaced with implants, and the implants were observed for 7 years. Clinical attachment level (CAL), probing attachment level (PAL), bleeding on probing, plaque index, and periodontal pathogens were recorded. Despite good compliance of case 1, periodontal pathogens were not eliminated and tissue destruction was not halted. The PAL outcomes of case 2 improved over time; mean PAL loss reached 0.35 mm/y in the first 3 years and then decreased to 0.01 mm/y. While CAL outcomes did not change in case 2, case 1 showed increased CAL loss after 8 years. Based on the limited findings of this case report, extraction of molars with class III furcation involvement and subsequent implant placement may render a better predictability of treatment outcomes than nonsurgical periodontal therapy in the cases of infection with periodontal pathogens.

Glenoid fossa position in Class II malocclusion associated with mandibular retrusion.

Science.gov (United States)

Giuntini, Veronica; De Toffol, Laura; Franchi, Lorenzo; Baccetti, Tiziano

2008-09-01

To assess the position of the glenoid fossa in subjects with Class II malocclusion associated with mandibular retrusion and normal mandibular size in the mixed dentition. A sample of 30 subjects (16 male, 14 female), age 9 years +/- 6 months, with skeletal and dental Class II malocclusion associated with mandibular retrusion, normal skeletal vertical relationships, and normal mandibular dimensions, was compared with a matched group of 37 subjects (18 male, 19 female) with skeletal and dental Class I relationships. The comparisons between the Class II group and the control group on the cephalometric measures for the assessment of glenoid fossa position were performed by means of a nonparametric test for independent samples (Mann-Whitney U-test, P < .05). Subjects with Class II malocclusion presented with a significantly more distal position of the glenoid fossa, when compared with the control group as measured by means of three parameters (GF-S on FH, GF-Ptm on FH, and GF-FMN). A posteriorly displaced glenoid fossa is a possible diagnostic feature of Class II malocclusion associated with mandibular retrusion. An effective cephalometric measurement to evaluate glenoid fossa position is the distance from the glenoid fossa to the frontomaxillonasal suture (GF-FMN).

Surgical–orthodontic treatment of a skeletal class III malocclusion

OpenAIRE

Katiyar, Radha; Singh, G. K.; Mehrotra, Divya; Singh, Alka

2010-01-01

For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment option left. One indication for surgery obviously is a malocclusion too severe for orthodontics alone. It is possible now to be at least semiquantitative about the limits of orthodontic treatment, in the context of producing normal occlusion as the diagrams of the “envelope of di...

Systemic treatment after whole-brain radiotherapy may improve survival in RPA class II/III breast cancer patients with brain metastasis.

Science.gov (United States)

Zhang, Qian; Chen, Jian; Yu, Xiaoli; Ma, Jinli; Cai, Gang; Yang, Zhaozhi; Cao, Lu; Chen, Xingxing; Guo, Xiaomao; Chen, Jiayi

2013-09-01

Whole brain radiotherapy (WBRT) is the most widely used treatment for brain metastasis (BM), especially for patients with multiple intracranial lesions. The purpose of this study was to examine the efficacy of systemic treatments following WBRT in breast cancer patients with BM who had different clinical characteristics, based on the classification of the Radiation Therapy Oncology Group recursive partitioning analysis (RPA) and the breast cancer-specific Graded Prognostic Assessment (Breast-GPA). One hundred and one breast cancer patients with BM treated between 2006 and 2010 were analyzed. The median interval between breast cancer diagnosis and identification of BM in the triple-negative patients was shorter than in the luminal A subtype (26 vs. 36 months, respectively; P = 0.021). Univariate analysis indicated that age at BM diagnosis, Karnofsky performance status/recursive partitioning analysis (KPS/RPA) classes, number of BMs, primary tumor control, extracranial metastases and systemic treatment following WBRT were significant prognostic factors for overall survival (OS) (P RPA classes and systemic treatments following WBRT remained the significant prognostic factors for OS. For RPA class I, the median survival with and without systemic treatments following WBRT was 25 and 22 months, respectively (P = 0.819), while for RPA class II/III systemic treatments significantly improved OS from 7 and 2 months to 11 and 5 months, respectively (P RPA class II/III patients.

Evaluation of orthognathic surgery on articular disc position and temporomandibular joint symptoms in skeletal class II patients: A Magnetic Resonance Imaging study

Science.gov (United States)

Firoozei, Gholamreza; Shahnaseri, Shirin; Momeni, Hasan

2017-01-01

Background The purpose of orthognathic surgery is to correct facial deformity and dental malocclusion and to obtain normal orofacial function. However, there are controversies of whether orthognathic surgery might have any negative influence on temporomandibular (TM) joint. The purpose of this study was to evaluate the influence of orthognathic surgery on articular disc position and temporomandibular joint symptoms of skeletal CI II patients by means of magnetic resonance imaging. Material and Methods For this purpose, fifteen patients with skeletal CI II malocclusion, aged 19-32 years (mean 23 years), 10 women and 5 men, from the Isfahan Department of Oral and Maxillofacial Surgery were studied. All received LeFort I and bilateral sagittal split osteotomy (BSSO) osteotomies and all patients received pre- and post-surgical orthodontic treatment. Magnetic resonance imaging was performed 1 day preoperatively and 3 month postoperatively. Descriptive statistics and Wilcoxon and Mc-Nemar tests were used for statistical analysis. Psurgery (mean=5.74±1.21). After surgery disc position range was 4.36 to 7.40 (mean=5.65±1.06). Statistical analysis proved that although TM disc tended to move anteriorly after BSSO surgery, this difference was not statistically significant (p valueorthognathic surgery does not alter the disc and condyle relationship. Therefore, it has minimal effects on intact and functional TM joint. Key words:Orthognathic surgery, skeletal class 2, magnetic resonance imaging, temporomandibular disc. PMID:28936287

A class III chitinase without disulfide bonds from the fern, Pteris ryukyuensis: crystal structure and ligand-binding studies.

Science.gov (United States)

Kitaoku, Yoshihito; Umemoto, Naoyuki; Ohnuma, Takayuki; Numata, Tomoyuki; Taira, Toki; Sakuda, Shohei; Fukamizo, Tamo

2015-10-01

We first solved the crystal structure of class III catalytic domain of a chitinase from fern (PrChiA-cat), and found a structural difference between PrChiA-cat and hevamine. PrChiA-cat was found to have reduced affinities to chitin oligosaccharides and allosamidin. Plant class III chitinases are subdivided into enzymes with three disulfide bonds and those without disulfide bonds. We here referred to the former enzymes as class IIIa chitinases and the latter as class IIIb chitinases. In this study, we solved the crystal structure of the class IIIb catalytic domain of a chitinase from the fern Pteris ryukyuensis (PrChiA-cat), and compared it with that of hevamine, a class IIIa chitinase from Hevea brasiliensis. PrChiA-cat was found to adopt an (α/β)8 fold typical of GH18 chitinases in a similar manner to that of hevamine. However, PrChiA-cat also had two large loops that extruded from the catalytic site, and the corresponding loops in hevamine were markedly smaller than those of PrChiA-cat. An HPLC analysis of the enzymatic products revealed that the mode of action of PrChiA-cat toward chitin oligosaccharides, (GlcNAc) n (n = 4-6), differed from those of hevamine and the other class IIIa chitinases. The binding affinities of (GlcNAc)3 and (GlcNAc)4 toward the inactive mutant of PrChiA-cat were determined by isothermal titration calorimetry, and were markedly lower than those toward other members of the GH18 family. The affinity and the inhibitory activity of allosamidin toward PrChiA-cat were also lower than those toward the GH18 chitinases investigated to date. Several hydrogen bonds found in the crystal structure of hevamine-allosamidin complex were missing in the modeled structure of PrChiA-cat-allosamidin complex. The structural findings for PrChiA-cat successfully interpreted the functional data presented.

Paleopathological Study of Dwarfism-Related Skeletal Dysplasia in a Late Joseon Dynasty (South Korean) Population.

Science.gov (United States)

Woo, Eun Jin; Lee, Won-Joon; Hu, Kyung-Seok; Hwang, Jae Joon

2015-01-01

Skeletal dysplasias related to genetic etiologies have rarely been reported for past populations. This report presents the skeletal characteristics of an individual with dwarfism-related skeletal dysplasia from South Korea. To assess abnormal deformities, morphological features, metric data, and computed tomography scans are analyzed. Differential diagnoses include achondroplasia or hypochondroplasia, chondrodysplasia, multiple epiphyseal dysplasia, thalassemia-related hemolytic anemia, and lysosomal storage disease. The diffused deformities in the upper-limb bones and several coarsened features of the craniofacial bones indicate the most likely diagnosis to have been a certain type of lysosomal storage disease. The skeletal remains of EP-III-4-No.107 from the Eunpyeong site, although incomplete and fragmented, provide important clues to the paleopathological diagnosis of skeletal dysplasias.

Paleopathological Study of Dwarfism-Related Skeletal Dysplasia in a Late Joseon Dynasty (South Korean Population.

Directory of Open Access Journals (Sweden)

Eun Jin Woo

Full Text Available Skeletal dysplasias related to genetic etiologies have rarely been reported for past populations. This report presents the skeletal characteristics of an individual with dwarfism-related skeletal dysplasia from South Korea. To assess abnormal deformities, morphological features, metric data, and computed tomography scans are analyzed. Differential diagnoses include achondroplasia or hypochondroplasia, chondrodysplasia, multiple epiphyseal dysplasia, thalassemia-related hemolytic anemia, and lysosomal storage disease. The diffused deformities in the upper-limb bones and several coarsened features of the craniofacial bones indicate the most likely diagnosis to have been a certain type of lysosomal storage disease. The skeletal remains of EP-III-4-No.107 from the Eunpyeong site, although incomplete and fragmented, provide important clues to the paleopathological diagnosis of skeletal dysplasias.

Accuracy of Dolphin visual treatment objective (VTO prediction software on class III patients treated with maxillary advancement and mandibular setback

Directory of Open Access Journals (Sweden)

Robert J. Peterman

2016-06-01

Full Text Available Abstract Background Dolphin® visual treatment objective (VTO prediction software is routinely utilized by orthodontists during the treatment planning of orthognathic cases to help predict post-surgical soft tissue changes. Although surgical soft tissue prediction is considered to be a vital tool, its accuracy is not well understood in tow-jaw surgical procedures. The objective of this study was to quantify the accuracy of Dolphin Imaging’s VTO soft tissue prediction software on class III patients treated with maxillary advancement and mandibular setback and to validate the efficacy of the software in such complex cases. Methods This retrospective study analyzed the records of 14 patients treated with comprehensive orthodontics in conjunction with two-jaw orthognathic surgery. Pre- and post-treatment radiographs were traced and superimposed to determine the actual skeletal movements achieved in surgery. This information was then used to simulate surgery in the software and generate a final soft tissue patient profile prediction. Prediction images were then compared to the actual post-treatment profile photos to determine differences. Results Dolphin Imaging’s software was determined to be accurate within an error range of +/− 2 mm in the X-axis at most landmarks. The lower lip predictions were most inaccurate. Conclusions Clinically, the observed error suggests that the VTO may be used for demonstration and communication with a patient or consulting practitioner. However, Dolphin should not be useful for precise treatment planning of surgical movements. This program should be used with caution to prevent unrealistic patient expectations and dissatisfaction.

Mandibular cervical headgear vs rapid maxillary expander and facemask for orthopedic treatment of Class III malocclusion.

Science.gov (United States)

Baccetti, Tiziano; Rey, Diego; Angel, David; Oberti, Giovanni; McNamara, James A

2007-07-01

To compare the effectiveness of the rapid maxillary expander and facemask (RME/ FM) and mandibular cervical headgear (MCH) protocols when followed by fixed appliances and evaluated at a postpubertal observation in patients with dentoskeletal Class III malocclusion. The sample treated with the RME/FM followed by fixed appliances included 32 patients (12 boys and 20 girls). The sample treated with the MCH followed by fixed appliances included 26 patients (eight boys and 18 girls). Cephalometric analysis was performed at T(1) (before treatment) and T(2) (after the first phase of orthopedic therapy and the second phase of fixed appliances). T(1)-T(2) changes were evaluated by means of t-tests. Midfacial length, mandibular length, and the sagittal position of the chin all showed significantly smaller increases in the MCH group than in the RME/FM group. The amount of increase in the overjet was also significantly smaller in the MCH group, whereas the amount of molar correction was greater. The upper incisors were significantly less proclined and the lower incisors were significantly less retroclined in the MCH group when compared with the RME/FM group. RME/FM therapy appears to be indicated in Class III patients with a component of maxillary retrusion, whereas MCH therapy is preferable in patients with mandibular prognathism.

The hierarchy of stability and predictability in orthognathic surgery with rigid fixation: an update and extension

Directory of Open Access Journals (Sweden)

Phillips Ceib

2007-04-01

Full Text Available Abstract A hierarchy of stability exists among the types of surgical movements that are possible with orthognathic surgery. This report updates the hierarchy, focusing on comparison of the stability of procedures when rigid fixation is used. Two procedures not previously placed in the hierarchy now are included: correction of asymmetry is stable with rigid fixation and repositioning of the chin also is very stable. During the first post-surgical year, surgical movements in patients treated for Class II/long face problems tend to be more stable than those treated for Class III problems. Clinically relevant changes (more than 2 mm occur in a surprisingly large percentage of orthognathic surgery patients from one to five years post-treatment, after surgical healing is complete. During the first post-surgical year, patients treated for Class II/long face problems are more stable than those treated for Class III problems; from one to five years post-treatment, some patients in both groups experience skeletal change, but the Class III patients then are more stable than the Class II/long face patients. Fewer patients exhibit long-term changes in the dental occlusion than skeletal changes, because the dentition usually adapts to the skeletal change.

Extreme skeletal open bite correction with vertical elastics.

Science.gov (United States)

Cruz-Escalante, Marco Antonio; Aliaga-Del Castillo, Aron; Soldevilla, Luciano; Janson, Guilherme; Yatabe, Marilia; Zuazola, Ricardo Voss

2017-11-01

Severe skeletal open bites may be ideally treated with a combined surgical-orthodontic approach. Alternatively, compensations may be planned to camouflage the malocclusion with orthodontics alone. This case report describes the treatment of an 18-year-old man who presented with a severe open bite involving the anterior and posterior teeth up to the first molars, increased vertical dimension, bilateral Class III molar relationship, bilateral posterior crossbite, dental midline deviation, and absence of the maxillary right canine and the mandibular left first premolar. A treatment plan including the extraction of the mandibular right first premolar and based on uprighting and vertical control of the posterior teeth, combined with extrusion of the anterior teeth using multiloop edgewise archwire mechanics and elastics was chosen. After 6 months of alignment and 2 months of multiloop edgewise archwire mechanics, the open bite was significantly reduced. After 24 months of treatment, anterior teeth extrusion, posterior teeth intrusion, and counterclockwise mandibular rotation were accomplished. Satisfactory improvement of the overbite, overjet, sagittal malocclusion, and facial appearance were achieved. The mechanics used in this clinical case demonstrated good and stable results for open-bite correction at the 2-year posttreatment follow-up.

Regulation of the Tumor-Suppressor Function of the Class III Phosphatidylinositol 3-Kinase Complex by Ubiquitin and SUMO

Energy Technology Data Exchange (ETDEWEB)

Reidick, Christina [Biochemie Intrazellulärer Transportprozesse, Ruhr-Universität Bochum, Bochum 44801 (Germany); El Magraoui, Fouzi; Meyer, Helmut E. [Biomedical Research, Human Brain Proteomics II, Leibniz-Institut für Analytische Wissenschaften-ISAS, Dortmund 44139 (Germany); Stenmark, Harald [Department of Biochemistry, Institute for Cancer Research, Oslo University Hospital, Montebello, Oslo 0310 (Norway); Platta, Harald W., E-mail: harald.platta@rub.de [Biochemie Intrazellulärer Transportprozesse, Ruhr-Universität Bochum, Bochum 44801 (Germany)

2014-12-23

The occurrence of cancer is often associated with a dysfunction in one of the three central membrane-involution processes—autophagy, endocytosis or cytokinesis. Interestingly, all three pathways are controlled by the same central signaling module: the class III phosphatidylinositol 3-kinase (PI3K-III) complex and its catalytic product, the phosphorylated lipid phosphatidylinositol 3-phosphate (PtdIns3P). The activity of the catalytic subunit of the PI3K-III complex, the lipid-kinase VPS34, requires the presence of the membrane-targeting factor VPS15 as well as the adaptor protein Beclin 1. Furthermore, a growing list of regulatory proteins associates with VPS34 via Beclin 1. These accessory factors define distinct subunit compositions and thereby guide the PI3K-III complex to its different cellular and physiological roles. Here we discuss the regulation of the PI3K-III complex components by ubiquitination and SUMOylation. Especially Beclin 1 has emerged as a highly regulated protein, which can be modified with Lys11-, Lys48- or Lys63-linked polyubiquitin chains catalyzed by distinct E3 ligases from the RING-, HECT-, RBR- or Cullin-type. We also point out other cross-links of these ligases with autophagy in order to discuss how these data might be merged into a general concept.

Regulation of the Tumor-Suppressor Function of the Class III Phosphatidylinositol 3-Kinase Complex by Ubiquitin and SUMO

International Nuclear Information System (INIS)

Reidick, Christina; El Magraoui, Fouzi; Meyer, Helmut E.; Stenmark, Harald; Platta, Harald W.

2014-01-01

The occurrence of cancer is often associated with a dysfunction in one of the three central membrane-involution processes—autophagy, endocytosis or cytokinesis. Interestingly, all three pathways are controlled by the same central signaling module: the class III phosphatidylinositol 3-kinase (PI3K-III) complex and its catalytic product, the phosphorylated lipid phosphatidylinositol 3-phosphate (PtdIns3P). The activity of the catalytic subunit of the PI3K-III complex, the lipid-kinase VPS34, requires the presence of the membrane-targeting factor VPS15 as well as the adaptor protein Beclin 1. Furthermore, a growing list of regulatory proteins associates with VPS34 via Beclin 1. These accessory factors define distinct subunit compositions and thereby guide the PI3K-III complex to its different cellular and physiological roles. Here we discuss the regulation of the PI3K-III complex components by ubiquitination and SUMOylation. Especially Beclin 1 has emerged as a highly regulated protein, which can be modified with Lys11-, Lys48- or Lys63-linked polyubiquitin chains catalyzed by distinct E3 ligases from the RING-, HECT-, RBR- or Cullin-type. We also point out other cross-links of these ligases with autophagy in order to discuss how these data might be merged into a general concept

PLASTICITY OF SKELETAL MUSCLE STUDIED BY STEREOLOGY

Directory of Open Access Journals (Sweden)

Ida Eržen

2011-05-01

Full Text Available The present contribution provides an overview of stereological methods applied in the skeletal muscle research at the Institute of Anatomy of the Medical Faculty in Ljubljana. Interested in skeletal muscle plasticity we studied three different topics: (i expression of myosin heavy chain isoforms in slow and fast muscles under experimental conditions, (ii frequency of satellite cells in young and old human and rat muscles and (iii capillary supply of rat fast and slow muscles. We analysed the expression of myosin heavy chain isoforms within slow rat soleus and fast extensor digitorum longus muscles after (i homotopic and heterotopic transplantation of both muscles, (ii low frequency electrical stimulation of the fast muscle and (iii transposition of the fast nerve to the slow muscle. The models applied were able to turn the fast muscle into a completely slow muscle, but not vice versa. One of the indicators for the regenerative potential of skeletal muscles is its satellite cell pool. The estimated parameters, number of satellite cells per unit fibre length, corrected to the reference sarcomere length (Nsc/Lfib and number of satellite cells per number of nuclei (myonuclei and satellite cell nuclei (Nsc/Nnucl indicated that the frequency of M-cadherin stained satellite cells declines in healthy old human and rat muscles compared to young muscles. To access differences in capillary densities among slow and fast muscles and slow and fast muscle fibres, we have introduced Slicer and Fakir methods, and tested them on predominantly slow and fast rat muscles. Discussing three different topics that require different approach, the present paper reflects the three decades of the development of stereological methods: 2D analysis by simple point counting in the 70's, the disector in the 80's and virtual spatial probes in the 90's. In all methods the interactive computer assisted approach was utilised.

Value of fetal skeletal radiographs in the diagnosis of fetal death

International Nuclear Information System (INIS)

Bourliere-Najean, B.; Russel, A.S.; Petit, P.; Devred, P.; Panuel, M.; Piercecchi-Marti, M.D.; Fredouille, C.; Sigaudy, S.; Philip, N.

2003-01-01

The aim of this study was to assess the value of fetal skeletal radiographs in determining the etiology of fetal death. A total of 1193 post-mortem fetal skeletal radiographs were analysed. Fetuses were classified into one of three groups (group I: abnormality diagnosed during pregnancy; group II: maternal pathology; group III: spontaneous abortion of pregnancy, IIIa before 26 weeks of gestation (WG), IIIb after 26 weeks of gestation). Face, supine and lateral skeletal views were performed. Skeletal abnormalities were detected in 33.9% of the fetuses, including 22.7% with minor abnormalities (abnormal rib number, no nasal bone ossification, amesophalangia or P2 hypoplasia of the fifth digit) and 14.5% with major abnormalities (other skeletal abnormalities). Among the fetuses with major abnormalities, 98.8% came from group I, 2.9% came from group II, 2.3% came from group IIIa and none came from group IIIb. Fetal skeletal radiographs are not useful in fetuses arising from spontaneous abortion of pregnancy without abnormality on ultrasound screening, abnormality clinical examination or in fetuses with prenatal diagnosis of chromosomal abnormality. This practice is valuable only if there is a multidisciplinary team, with all the participants (pathologists, radiologists, geneticists) knowledgeable about fetal pathology. In the absence of this multidisciplinary approach, it is easier to X-ray all fetuses to avoid misdiagnosis and the important consequences for genetic counselling. (orig.)

Value of fetal skeletal radiographs in the diagnosis of fetal death

Energy Technology Data Exchange (ETDEWEB)

Bourliere-Najean, B.; Russel, A.S.; Petit, P.; Devred, P. [Department of Pediatric Radiology, CHU Timone, 264 rue St. Pierre, 13385 Marseille cedex 5 (France); Panuel, M. [Department of Radiology, Hopital Nord, chemin Bourrelys, 13915 Marseille cedex 20 (France); Piercecchi-Marti, M.D.; Fredouille, C. [Department of Pathology, CHU Timone, 264 rue St. Pierre, 13385 Marseille cedex 5 (France); Sigaudy, S.; Philip, N. [Department of Genetics, CHU Timone, 264 rue St. Pierre, 13385 Marseille cedex 5 (France)

2003-05-01

The aim of this study was to assess the value of fetal skeletal radiographs in determining the etiology of fetal death. A total of 1193 post-mortem fetal skeletal radiographs were analysed. Fetuses were classified into one of three groups (group I: abnormality diagnosed during pregnancy; group II: maternal pathology; group III: spontaneous abortion of pregnancy, IIIa before 26 weeks of gestation (WG), IIIb after 26 weeks of gestation). Face, supine and lateral skeletal views were performed. Skeletal abnormalities were detected in 33.9% of the fetuses, including 22.7% with minor abnormalities (abnormal rib number, no nasal bone ossification, amesophalangia or P2 hypoplasia of the fifth digit) and 14.5% with major abnormalities (other skeletal abnormalities). Among the fetuses with major abnormalities, 98.8% came from group I, 2.9% came from group II, 2.3% came from group IIIa and none came from group IIIb. Fetal skeletal radiographs are not useful in fetuses arising from spontaneous abortion of pregnancy without abnormality on ultrasound screening, abnormality clinical examination or in fetuses with prenatal diagnosis of chromosomal abnormality. This practice is valuable only if there is a multidisciplinary team, with all the participants (pathologists, radiologists, geneticists) knowledgeable about fetal pathology. In the absence of this multidisciplinary approach, it is easier to X-ray all fetuses to avoid misdiagnosis and the important consequences for genetic counselling. (orig.)

Evaluation of cephalometric changes in patients with class III malocclusion in mixed dentition period following face mask therapy and slow maxillary expansion

Directory of Open Access Journals (Sweden)

Ahmad Akhondi MS.

2008-11-01

Full Text Available "nBackground and Aim: Among different treatments of patients with Class III malocclusion , orthopedic protraction of maxilla has been known as an effective method in mixed dentition period. The aim of this study was to evaluate the cephalometric changes of Cl III patients in mixed dentition period following face mask therapy and slow maxillary expansion. "nMaterials and Methods: This was a before-after study which was conducted on 10 children in mixed dentition period, who had class III malocclusion and maxillary deficiency according to the Stiener and Mc Namara's analysis. The patients were all treated by protraction face mask and slow maxillary expansion. The cephalometric changes of maxilla , mandible and dental relations during the treatment were analyzed by Paired sample T Test. P<0.05 was considered as the level of significant. "nResults: The overjet increasement was 1.7mm. Co. ANS distance improvement was 5.6mm, Ptm.ANS distance increasing was 3mm, and ultimately improvement of Gf.s distance was 1.5mm which were all statistically significant (p<0.05. "nConclusion: Based on the results of this study, face mask therapy with slow maxillary expansion is able to improve the horizotal position of maxilla, in patients with Cl III malocclusion , in mixed dentition period.

Bone turnover markers and bone scintigraphy in the evaluation of skeletal metastases

International Nuclear Information System (INIS)

Chrapko, B.; Nocun, A.; Golebiewska, R.; Jankowska, H.; Zaorska-Rajca, J.

2005-01-01

The aim of this study was evaluation of the clinical usefulness of bone scintigraphy and of serum bone turnover marker levels in the assessment of skeletal metastases. We investigated 60 patients with suspected skeletal metastases. Serum level of bone-formation marker: amino- terminal propeptide of type I procollagen (PINP) and a bone-degradation marker: carboxy-terminal telopeptide of type I collagen (ICTP) were assessed with radioimmunoassays. Bone MDP- 99m- Tc scans were performed as well. Hot spots were showed in 72% of patients. According to bone scintigraphy the patients were divided in to 3 groups: Group I - without hot spots (n = 16; 26%), Group II up to 10 hot spots (n = 25; 42%) and Group III more that 10 hot spots (n = 19; 32%). Mean serum level of ICTP was significantly higher in Group II than in Group I (p < 0.05), as well as in Group III compared to Group II (p < 0.001) and in Group III compared to Group I (p < 0.001). There is only one significant relationship in PINP levels - between Groups II and III. The levels of bone pathological degradation (ICTP) and bone formation reflect the metastatic disease extent in bone. Serum ICTP level is more useful in staging metastasis. Significantly higher PINP reflects only a much disseminated process. (author)

Morphometric Analysis of Mandibular Growth in Skeletal Class III Malocclusion

Directory of Open Access Journals (Sweden)

Jenny Zwei-Chieng Chang

2006-01-01

Conclusion: We conclude that thin-plate spline analysis and the finite element morphometric method are efficient for the localization and quantification of size and shape changes that occur during mandibular growth. Plots of maximum and minimum principal directions can provide useful information about the trends of growth changes.

Herbst appliance with skeletal anchorage versus dental anchorage in adolescents with Class II malocclusion: study protocol for a randomised controlled trial.

Science.gov (United States)

Batista, Klaus Barretto Dos Santos Lopes; Lima, Tatiana; Palomares, Nathália; Carvalho, Felipe de Assis; Quintão, Cátia; Miguel, José Augusto Mendes; Lin, Yin-Ling; Su, Ting-Li; O'Brien, Kevin

2017-11-25

The Herbst appliance is an orthodontic appliance that is used for the correction of class II malocclusion with skeletal discrepancies. Research has shown that this is effective. However, a potential harm is excessive protrusion of the lower front teeth. This is associated with gingival recession, loss of tooth support, and root resorption. This trial evaluates a method of reducing this problem. The study is a single-center, randomised, assessor-blinded, superiority clinical trial with parallel 1:1 allocation. Male and female young people (10-14 years old) with prominent front teeth (class II, division 1) will be treated in one orthodontic clinic. Group 1 will be treated with the conventional Herbst appliance with dental anchorage and group 2 with the Herbst appliance with indirect skeletal anchorage for 12 months. The primary objective will be to compare the proclination of the lower incisors between the Herbst appliance with dental anchorage and skeletal anchorage. Secondary objectives will be to evaluate the changes occurring between the groups in the mandible, maxilla, lower and upper molars, and in gingival recession and root resorption at the end of the treatment. Additionally, the young patient's experience using the appliances will be assessed. The primary outcome measure will be the amount of lower incisor proclination at the end of treatment. This will be assessed by cone-beam computed tomography (CBCT) superimposition. Secondary outcome measures will be the changes in the mandible, maxilla, lower and upper molars at the end of treatment assessed by tomography superimposition and the young patient's experience using the appliances assessed by self-reported questionnaires and semi-structured interviews. The randomisation method will be blocked randomisation, using software to generate a randomised list. The allocation concealment will be done in opaque envelopes numbered from 1 to 40 containing the treatment modality. The randomisation will be

Mechanistic investigation of food effect on disintegration and dissolution of BCS class III compound solid formulations: the importance of viscosity.

Science.gov (United States)

Radwan, Asma; Amidon, Gordon L; Langguth, Peter

2012-10-01

A negative food effect, i.e. a decrease in bioavailability upon the co-administration of compounds together with food, has been attributed particularly with high solubility/low permeability compounds (BCS class III). Different mechanisms have been proposed including intestinal dilution leading to a lower concentration gradient across the intestinal wall as well as binding of the active pharmaceutical ingredient to food components in the intestine and thereby decreasing the fraction of the dose available for absorption. These mechanisms refer primarily to the compound and not to the dosage form. An increase in viscosity of the dissolution fluid will in particular affect the absorption of BCS type III compounds with preferential absorption in the upper small intestine if the API release is delayed from the dosage form. The present study demonstrated that the increase in viscosity of the dissolution medium, following ingestion of a solid meal, may drastically reduce disintegration and dissolution. For that purpose the viscosity of the standard FDA meal was determined and simulated by solutions of HPMC in buffer. As model formulations, three commercially available tablets containing trospium chloride, a BCS class III m-cholinoreceptor antagonist was used. Trospium chloride drug products have been described to undergo a negative food effect of more than 80% following ingestion with food. The tablets showed prolonged disintegration times and reduced dissolution rates in viscous media, which could be attributed to changes in the liquid penetration rates. The effect was particularly significant for film-coated tablets relative to uncoated dosage forms. The results show the necessity of considering media viscosity when designing in vitro models of drug release for BCS type III drug formulations. Copyright © 2012 John Wiley & Sons, Ltd.

Skeletal Muscle-derived Hematopoietic Stem Cells: Muscular Dystrophy Therapy by Bone Marrow Transplantation

OpenAIRE

Asakura, Atsushi

2012-01-01

For postnatal growth and regeneration of skeletal muscle, satellite cells, a self-renewing pool of muscle stem cells, give rise to daughter myogenic precursor cells that contribute to the formation of new muscle fibers. In addition to this key myogenic cell class, adult skeletal muscle also contains hematopoietic stem cell and progenitor cell populations which can be purified as a side population (SP) fraction or as a hematopoietic marker CD45-positive cell population. These muscle-derived he...

The effect of early physiotherapy on the recovery of mandibular function after orthognathic surgery for class III correction. Part II: electromyographic activity of masticatory muscles.

Science.gov (United States)

Ko, Ellen Wen-Ching; Teng, Terry Te-Yi; Huang, Chiung Shing; Chen, Yu-Ray

2015-01-01

The study was conducted to evaluate the effect of early physical rehabilitation by comparing the differences of surface electromyographic (sEMG) activity in the masseter and anterior temporalis muscles after surgical correction of skeletal class III malocclusion. The prospective study included 63 patients; the experimental groups contained 31 patients who received early systematic physical rehabilitation; the control group (32 patients) did not receive physiotherapy. The amplitude of sEMG in the masticatory muscles reached 72.6-121.3% and 37.5-64.6% of pre-surgical values in the experimental and control groups respectively at 6 weeks after orthognathic surgery (OGS). At 6 months after OGS, the sEMG reached 135.1-233.4% and 89.6-122.5% of pre-surgical values in the experimental and control groups respectively. Most variables in the sEMG examination indicated that recovery of the masticatory muscles in the experimental group was better than the control group as estimated in the early phase (T1 to T2) and the total phase (T1 to T3); there were no significant differences between the mean recovery percentages in the later phase (T2 to T3). Early physical rehabilitative therapy is helpful for early recovery of muscle activity in masticatory muscles after OGS. After termination of physical therapy, no significant difference in recovery was indicated in patients with or without early physiotherapy. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Substrate specificity determinants of class III nucleotidyl cyclases.

Science.gov (United States)

Bharambe, Nikhil G; Barathy, Deivanayaga V; Syed, Wajeed; Visweswariah, Sandhya S; Colaςo, Melwin; Misquith, Sandra; Suguna, Kaza

2016-10-01

The two second messengers in signalling, cyclic AMP and cyclic GMP, are produced by adenylyl and guanylyl cyclases respectively. Recognition and discrimination of the substrates ATP and GTP by the nucleotidyl cyclases are vital in these reactions. Various apo-, substrate- or inhibitor-bound forms of adenylyl cyclase (AC) structures from transmembrane and soluble ACs have revealed the catalytic mechanism of ATP cyclization reaction. Previously reported structures of guanylyl cyclases represent ligand-free forms and inactive open states of the enzymes and thus do not provide information regarding the exact mode of substrate binding. The structures we present here of the cyclase homology domain of a class III AC from Mycobacterium avium (Ma1120) and its mutant in complex with ATP and GTP in the presence of calcium ion, provide the structural basis for substrate selection by the nucleotidyl cyclases at the atomic level. Precise nature of the enzyme-substrate interactions, novel modes of substrate binding and the ability of the binding pocket to accommodate diverse conformations of the substrates have been revealed by the present crystallographic analysis. This is the first report to provide structures of both the nucleotide substrates bound to a nucleotidyl cyclase. Coordinates and structure factors have been deposited in the Protein Data Bank with accession numbers: 5D15 (Ma1120 CHD +ATP.Ca 2+ ), 5D0E (Ma1120 CHD +GTP.Ca 2+ ), 5D0H (Ma1120 CHD (KDA→EGY)+ATP.Ca 2+ ), 5D0G (Ma1120 CHD (KDA→EGY)+GTP.Ca 2+ ). Adenylyl cyclase (EC number: 4.6.1.1). © 2016 Federation of European Biochemical Societies.

Skeletal muscle excitation-contraction coupling: who are the dancing partners?

Science.gov (United States)

Rebbeck, Robyn T; Karunasekara, Yamuna; Board, Philip G; Beard, Nicole A; Casarotto, Marco G; Dulhunty, Angela F

2014-03-01

There is an overwhelming body of work supporting the idea that excitation-contraction coupling in skeletal muscle depends on a physical interaction between the skeletal muscle isoform of the dihydropyridine receptor L-type Ca(2+) channel and the skeletal isoform of the ryanodine receptor Ca(2+) release channel. A general assumption is that this physical interaction is between "critical" residues that have been identified in the II-III loop of the dihydropyridine receptor alpha subunit and the ryanodine receptor. However, despite extensive searches, the complementary "critical" residues in the ryanodine receptor have not been identified. This raises the possibility that the coupling proceeds either through other subunits of the dihydropyridine receptor and/or other co-proteins within the large RyR1 protein complex. There have been some remarkable advances in recent years in identifying proteins in the RyR complex that impact on the coupling process, and these are considered in this review. A major candidate for a role in the coupling mechanism is the beta subunit of the dihydropyridine receptor, because specific residues in both the beta subunit and ryanodine receptor have been identified that facilitate an interaction between the two proteins and these also impact on excitation-contraction coupling. This role of beta subunit remains to be fully investigated as well as the degree to which it may complement any other direct or indirect voltage-dependent coupling interactions between the DHPR alpha II-III loop and the ryanodine receptor. Copyright © 2014. Published by Elsevier Ltd.

Quantitative skeletal scintiscanning

International Nuclear Information System (INIS)

Haushofer, R.

1982-01-01

330 patients were examined by skeletal scintiscanning with sup(99m)Tc pyrophosphate and sup(99m)methylene diphosphonate in the years between 1977 and 1979. Course control examinations were carried out in 12 patients. The collective of patients presented with primary skeletal tumours, metastases, inflammatory and degenerative skeletal diseases. Bone scintiscanning combined with the ''region of interest'' technique was found to be an objective and reproducible technique for quantitative measurement of skeletal radioactivity concentrations. The validity of nuclear skeletal examinations can thus be enhanced as far as diagnosis, course control, and differential diagnosis are concerned. Quantitative skeletal scintiscanning by means of the ''region of interest'' technique has opened up a new era in skeletal diagnosis by nuclear methods. (orig./MG) [de

Effect of ascorbic acid on fatigue of skeletal muscle fibres in long term cold exposed sprague dawley rats

International Nuclear Information System (INIS)

Rashid, A.; Ayub, M.

2011-01-01

On exposure to prolonged cold temperature, the body responds for effective heat production both by shivering and non-shivering thermo genesis. Cold exposure increases the production of reactive oxygen species which influence the sarcoplasmic reticulum Ca/sup ++/ release from the skeletal muscles and affect their contractile properties. The role of ascorbic acid supplementation on force of contraction during fatigue of cold exposed skeletal muscles was evaluated in this study. Method: Ninety healthy, male Sprague Dawley rats were randomly divided into three groups of control, cold exposed, and cold exposed with ascorbic acid 500 mg/L supplementation mixed in drinking water. Group II and III were given cold exposure by keeping their cages in ice-filled tubs for 1 hr/day for one month. After one month, the extensor digitorum longus muscle was dissected out and force of contraction during fatigue in the skeletal muscle fibres was analysed on a computerised data acquisition system. Results: The cold exposed group showed a significant delay in the force of contraction during fatigue of skeletal muscle fibres compared to control group. Group III showed easy fatigability and a better force of contraction than the cold exposed group. Conclusions: Ascorbic acid increases the force of contraction and decreases resistance to fatigue in the muscles exposed to chronic cold. (author)

Effectiveness of comprehensive fixed appliance treatment used with the Forsus Fatigue Resistant Device in Class II patients.

Science.gov (United States)

Franchi, Lorenzo; Alvetro, Lisa; Giuntini, Veronica; Masucci, Caterina; Defraia, Efisio; Baccetti, Tiziano

2011-07-01

To assess the dental, skeletal, and soft tissue effects of comprehensive fixed appliance treatment combined with the Forsus Fatigue Resistant Device (FRD) in Class II patients. Thirty-two Class II patients (mean age 12.7 ± 1.2 years) were treated consecutively with the FRD protocol and compared with a matched sample of 27 untreated Class II subjects (mean age 12.8 ± 1.3 years). Lateral cephalograms were taken before therapy and at the completion of comprehensive therapy. The mean duration of comprehensive treatment was 2.4 ± 0.4 years. Statistical comparisons were carried out with the Student's t-test (P < .05). The success rate was 87.5%. The FRD group showed a significant restraint in the sagittal skeletal position of the maxilla (also at the soft tissue level), a significant increase in mandibular length, and a significant improvement in maxillo-mandibular sagittal skeletal relationships. The treated group exhibited a significant reduction in overjet and a significant increase in molar relationship. The lower incisors were significantly proclined and intruded, while the lower first molars moved significantly in a mesial and vertical direction. The FRD protocol is effective in correcting Class II malocclusion with a combination of skeletal (mainly maxillary) and dentoalveolar (mainly mandibular) modifications.

Original Research. Correlation Between Cranial Base Morphology And Various Types Of Skeletal Anomalies

Directory of Open Access Journals (Sweden)

Panainte Irinel

2017-03-01

Full Text Available Background: Previous studies regarding various types of malocclusions have found correlations between the angle of the base of the skull and prognathism. Aim of the study: This cephalometric study sought to investigate the function of the cranium base angle in different types of malocclusion on a group of Romanian subjects. Materials and methods: Forty-four cephalometric radiographs were selected from patients referred to orthodontic treatment. The cephalometric records were digitized, and with the CorelDRAW Graphics Suite X5 software 22 landmarks have been marked on each radiograph. A number of linear and angular variables were calculated. Results: The angle of the base of the skull was found to be higher in Class II Division 1 subjects compared to the Class I group. The cranial base lengths, N-S and S-Ba, were significantly larger in both categories of Class II malocclusion than in Class I patients, but measurements were comparable in Class I and Class III. The SNA angle showed no considerable variation between Class I subjects and the other groups. SNA-SNP was significantly increased above Class I values in Class II Division1 and Class II Division 2 groups. No significant dissimilarities were observed for these lengths between Class I and Class III patients. Conclusions: The angle of the cranium base (S-N-Ba, S-N-Ar does not have a major role in the progression of malocclusion. In Angle Class II malocclusion the SNA angle is increased, and SNB is increased in malocclusion Class III. The anterior skull base length is increased in Class II anomalies. The length of the maxillary bone base is increased in Class II malocclusions type; in Class III type of malocclusion the length of the mandible bone is increased.

Relationship between age at menarche and skeletal maturation stages in Taiwanese female orthodontic patients.

Science.gov (United States)

Lai, Eddie Hsiang-Hua; Chang, Jenny Zwei-Chieng; Jane Yao, Chung-Chen; Tsai, Shih-Jaw; Liu, Jen-Pei; Chen, Yi-Jane; Lin, Chun-Pin

2008-07-01

The age at menarche reflects a pubertal girl's physiologic maturity. The aims of this study were to evaluate the relationship between the age at menarche and skeletal maturation in female orthodontic patients. Hand-wrist radiographs and lateral cephalometric radiographs from 304 adolescent female subjects (age, 8-18.9 years) were selected from the files of the Department of Orthodontics, National Taiwan University Hospital (NTUH). Hand-wrist bone maturation stages were assessed using the NTUH Skeletal Maturation Index (NTUH-SMI). Cervical vertebral maturation stages (CVMS) were determined using the latest CVMS Index. Menarcheal ages were self-reported by the patients and verified by the patients' mothers. The relationships between the NTUH-SMI or CVM stages and menarcheal status were investigated. More than 90% of the 148 subjects who had already attained menstruation had skeletal maturation beyond the NTUH-SMI stage four or CVMS III. However, the subjects who had never experienced menarche mostly had skeletal maturation before NTUH-SMI stage five or CVMS IV. During the period of orthodontic treatment, 19 females experienced their menarche. The mean age at menarche for the 167 female patients in total was 11.97 years. In average, menarche occurred between NTUH-SMI stages four and five or between CVM stages III and IV. The percentage of girls with menses increased from 1.2% at age 9 to 6.6% at age 10, 39.5% at age 11, 81.4% at age 12, 97% at age 13, and 100% at age 14. Compared with the results obtained 20 years previously, we found a downward shift of 0.47 years per decade for the mean age at menarche in female orthodontic patients. The majority of female orthodontic patients have passed the pubertal growth spurt when they experience their menarche. Menarche usually follows the pubertal growth spurt by about 1 year and occurs after NTUH-SMI stage four or CVMS III.

Induced skeletal mutations

International Nuclear Information System (INIS)

Selby, P.B.

1979-01-01

This paper describes a large-scale experiment that, by means of breeding tests, confirmed that many dominant skeletal mutations are induced by large-dose radiation exposure. The author also discusses: (1) the major advantages and disadvantages of the skeletal method in improving estimates of genetic hazard to man; (2) future uses of the skeletal method; (3) direct estimation of risk beyond the first generation using the skeletal method; and (4) the possibility of using the skeletal method as a quick and easy screen for chemical mutagens

Effect of timing on the outcomes of 1-phase nonextraction therapy of Class II malocclusion.

Science.gov (United States)

Baccetti, Tiziano; Franchi, Lorenzo; Kim, Ludia H

2009-10-01

The aim of this cephalometric study was to evaluate the role of timing in relation to skeletal maturity on the outcomes of nonextraction comprehensive Class II therapy. Three samples of patients with Class II Division 1 malocclusion were treated with headgear combined with fixed appliances and Class II elastics. Lateral cephalograms were taken of all subjects before therapy (T1) and at an average interval of 6 months after therapy (T2). The first sample (23 subjects) was treated before the pubertal growth spurt, the second sample (24 subjects) received therapy during the pubertal growth spurt, and the third sample (13 subjects) was treated at a postpubertal stage of development. The average T1 to T2 interval was approximately 30 months for all patients, with an average treatment duration of 24 months. Longitudinal observations of a group of 17 subjects with untreated Class II malocclusions were compared with the treated groups at the 3 skeletal maturation intervals with nonparametric statistics. Class II treatment before or during the pubertal growth spurt induced significant favorable skeletal changes (restricted maxillary advancement in prepubertal patients and enhanced mandibular growth in pubertal patients). Patients treated after the pubertal growth spurt had only significant dentoalveolar changes. The greatest amount of dentoskeletal correction of Class II malocclusion with 1-phase nonextraction treatment occurred in patients treated during the pubertal growth spurt.

To Evaluate the Relationship between Mandibular Canine Calcification Stages and Skeletal Age.

Science.gov (United States)

Malik, Pooja; Rana, Vivek; Rehani, Usha

2012-01-01

The purpose of this study was to assess skeletal age and establish relationship between mandibular canine calcification and skeletal age. The study included 147 females aged 10 to 13 years. The subjects were divided into three groups: Group I-comprising of 10 to 11 years old female; Group II-comprising of 11 to 12 years old female; Group III-12 to 13 years female. OPG and hand and wrist radiographs of left side for each subject were taken with prior consent of their parents. The calcification status of canine was evaluated from orthopantomograms according to scores given in Demirjian's method. The stages of ossification of various carpal bones were evaluated using radiographic atlas of Greulich-Pyle and skeletal age was calculated. Data collected was statistically analyzed. The results drawn from this study showed that a strong correlation was observed for canine calcification stage F for 10 to 11 years and for stage G in 11 to 12 years and 12 to 13 years respectively. How to cite this article: Malik P, Rana V, Rehani U. To Evaluate the Relationship between Mandibular Canine Calcification Stages and Skeletal Age. Int J Clin Pediatr Dent 2012;5(1): 14-19.

Changes in calmodulin concentration and cyclic 3',5'-nucleotide phosphodiesterase activity in skeletal muscle of hyper- and hypothyroid rats.

Science.gov (United States)

Mano, T; Iwase, K; Yoshimochi, I; Sawai, Y; Oda, N; Nishida, Y; Mokuno, T; Kotake, M; Nakai, A; Hayakawa, N

1995-08-01

Hyper- and hypothyroid states occasionally induce skeletal muscle dysfunction i.e. periodic paralysis and thyroid myopathy. The etiology of these diseases remains unclear, but several findings suggest that the catecholamine-beta-receptor-cAMP system or other messenger systems are disturbed in these diseases. In this context, we evaluated changes in the cyclic 3',5'-nucleotide metabolic enzyme, cyclic 3',5'-nucleotide phosphodiesterase (PDE) and calmodulin concentrations in skeletal muscles of hyper- and hypothyroid rats. Activities of cyclic AMP-PDE were low in skeletal muscle both from hyper- and hypothyroid rats, and calmodulin concentration was high in hyperthyroid and low in hypothyroid rats, as compared with normal rats. DE-52 column chromatographic analysis showed that the cGMP hydrolytic activity in peak I and the cAMP hydrolytic activity in peak II were decreased in hypothyroid rats, whereas cAMP hydrolytic activity in peak III was unchanged. The cAMP hydrolytic activity in peak III was decreased in hyperthyroid rats, but the activities in peaks I and II were unchanged. These findings indicate that cAMP and calmodulin may have some role in skeletal muscle function in the hyperthyroid state, and that cAMP and calmodulin-dependent metabolism may be suppressed in the hypothyroid state.

Long-term skeletal and dental changes in patients with cleft lip and palate after maxillary distraction: a report of three cases treated with a rigid external distraction device.

Science.gov (United States)

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2005-04-01

We examined long-term skeletal and dental changes in three patients with cleft lip and palate who underwent maxillary distraction using a rigid external distraction device. Two were children, and one was an adult. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In the adult, the positions of all examination points were relatively stable from 6 to 36 months postoperatively, and the OJ and OB were maintained at over 2 mm at 36 months. In the children, the positions of ANS and U1 changed inferiorly, Pog and L1 changed anteroinferiorly, and OJ and OB tended to decrease from 6 to 36 months postoperatively. Long-term skeletal and dental stability following maxillary distraction was relatively well maintained in the adult patient. In the children, the maxillomandibular growth was observed after maxillary distraction, but the mandibular overgrowth might have been inhibited by the correction of class III dentoskeletal deformity resulting from the maxillary distraction.

Epigenetic Metabolite Acetate Inhibits Class I/II Histone Deacetylases, Promotes Histone Acetylation, and Increases HIV-1 Integration in CD4+ T Cells.

Science.gov (United States)

Bolduc, Jean-François; Hany, Laurent; Barat, Corinne; Ouellet, Michel; Tremblay, Michel J

2017-08-15

In this study, we investigated the effect of acetate, the most concentrated short-chain fatty acid (SCFA) in the gut and bloodstream, on the susceptibility of primary human CD4 + T cells to HIV-1 infection. We report that HIV-1 replication is increased in CD3/CD28-costimulated CD4 + T cells upon acetate treatment. This enhancing effect correlates with increased expression of the early activation marker CD69 and impaired class I/II histone deacetylase (HDAC) activity. In addition, acetate enhances acetylation of histones H3 and H4 and augments HIV-1 integration into the genome of CD4 + T cells. Thus, we propose that upon antigen presentation, acetate influences class I/II HDAC activity that transforms condensed chromatin into a more relaxed structure. This event leads to a higher level of viral integration and enhanced HIV-1 production. In line with previous studies showing reactivation of latent HIV-1 by SCFAs, we provide evidence that acetate can also increase the susceptibility of primary human CD4 + T cells to productive HIV-1 infection. IMPORTANCE Alterations in the fecal microbiota and intestinal epithelial damage involved in the gastrointestinal disorder associated with HIV-1 infection result in microbial translocation that leads to disease progression and virus-related comorbidities. Indeed, notably via production of short-chain fatty acids, bacteria migrating from the lumen to the intestinal mucosa could influence HIV-1 replication by epigenetic regulatory mechanisms, such as histone acetylation. We demonstrate that acetate enhances virus production in primary human CD4 + T cells. Moreover, we report that acetate impairs class I/II histone deacetylase activity and increases integration of HIV-1 DNA into the host genome. Therefore, it can be postulated that bacterial metabolites such as acetate modulate HIV-1-mediated disease progression. Copyright © 2017 American Society for Microbiology.

[The application of Edgewise technique auxillary with extra oral anchorage and class III elastic in the treatment of bimaxillary protrusion.].

Science.gov (United States)

Liu, H H; Weng, S E; Chen, R J

1995-12-01

In the treatment of growing bimaxillary protrusion patients,Edgewise technique auxillary with extra oral anchorage and class III elastic help to improve the patient's chin shape,recover his beauty of lower facial part and get a good occlusion along with the growing of mandible.The purpose of this study is:analysis the force system in the treatment and evaluate the result of the treatment with some typical cases.

Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G.

2008-11-01

This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X

Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

Energy Technology Data Exchange (ETDEWEB)

Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G

2008-11-15

This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X.

Preventing an identity crisis: unexpected co-expression of class III beta-tubulin and glial fibrillary acidic protein in human fetal astrocytes in culture

Czech Academy of Sciences Publication Activity Database

Katsetos, C.D.; Dráberová, Eduarda; Del Valle, L.; Bertrand, L.; Agamanolis, D.P.; de Chadarévian, J.-P.; Legido, A.; Dráber, Pavel

2007-01-01

Roč. 26, č. 11 (2007), s. 107-107 ISSN 0364-5134 R&D Projects: GA MŠk LC545; GA ČR GA204/05/2375 Institutional research plan: CEZ:AV0Z50520514 Keywords : class III beta-tubulin * fetal glia Subject RIV: EB - Genetics ; Molecular Biology

Disruption of the Class IIa HDAC Corepressor Complex Increases Energy Expenditure and Lipid Oxidation

Directory of Open Access Journals (Sweden)

Vidhi Gaur

2016-09-01

Full Text Available Drugs that recapitulate aspects of the exercise adaptive response have the potential to provide better treatment for diseases associated with physical inactivity. We previously observed reduced skeletal muscle class IIa HDAC (histone deacetylase transcriptional repressive activity during exercise. Here, we find that exercise-like adaptations are induced by skeletal muscle expression of class IIa HDAC mutants that cannot form a corepressor complex. Adaptations include increased metabolic gene expression, mitochondrial capacity, and lipid oxidation. An existing HDAC inhibitor, Scriptaid, had similar phenotypic effects through disruption of the class IIa HDAC corepressor complex. Acute Scriptaid administration to mice increased the expression of metabolic genes, which required an intact class IIa HDAC corepressor complex. Chronic Scriptaid administration increased exercise capacity, whole-body energy expenditure and lipid oxidation, and reduced fasting blood lipids and glucose. Therefore, compounds that disrupt class IIa HDAC function could be used to enhance metabolic health in chronic diseases driven by physical inactivity.

Skeletal muscle metastases: primary tumours, prevalence, and radiological features

International Nuclear Information System (INIS)

Surov, Alexey; Spielmann, Rolf Peter; Behrmann, Curd; Hainz, Michael; Holzhausen, Hans-Juergen; Arnold, Dirk; Katzer, Michaela; Schmidt, Joerg

2010-01-01

Although skeletal muscles comprise nearly 50% of the total human body mass and are well vascularised, metastases in the musculature are rare. The reported prevalence of skeletal muscle metastases from post-mortem studies of patients with cancer is inconstant and ranges from 0.03 to 17.5%. Of 5,170 patients with metastasised cancer examined and treated at our institution during the period from January 2000 to December 2007, 61 patients with muscle metastases (80 lesions) were identified on computed tomography (CT). Genital tumours (24.6%) were the most frequent malignancies metastasising into the skeletal musculature, followed by gastrointestinal tumours (21.3%), urological tumours (16.4%), and malignant melanoma (13.1%). Other primary malignancies were rarer, including bronchial carcinoma (8.2%), thyroid gland carcinoma (4.9%), and breast carcinoma (3.3%). In 8.2%, carcinoma of unknown primary was diagnosed. Skeletal muscle metastases (SMM) were located in the iliopsoas muscle (27.5%), paravertebral muscles (25%), gluteal muscles (16.3%), lower extremity muscles (12.5%), abdominal wall muscles (10%), thoracic wall muscles (5%), and upper extremity muscles (3.8%). Most (76.3%) of the 80 SMM were diagnosed incidentally during routine staging CT examinations, while 23.7% were symptomatic. Radiologically, SMM presented with five different types of lesions: focal intramuscular masses (type I, 52.5% of SMM), abscess-like intramuscular lesions (type II, 32.5%), diffuse metastatic muscle infiltration (type III, 8.8%), multifocal intramuscular calcification (type IV, 3.7%) and intramuscular bleeding (type V, 2.5%). (orig.)

Skeletal muscle metastases: primary tumours, prevalence, and radiological features

Energy Technology Data Exchange (ETDEWEB)

Surov, Alexey; Spielmann, Rolf Peter; Behrmann, Curd [Martin-Luther-University Halle-Wittenberg, Department of Radiology, Halle (Germany); Hainz, Michael; Holzhausen, Hans-Juergen [Martin-Luther-University Halle-Wittenberg, Department of Pathology, Halle (Germany); Arnold, Dirk [Martin-Luther-University Halle-Wittenberg, Department of Haematology/Oncology, Halle (Germany); Katzer, Michaela [Martin-Luther-University Halle-Wittenberg, Department of Urology, Halle (Germany); Schmidt, Joerg [Martin-Luther-University Halle-Wittenberg, Department of Medical Statistics and Controlling, Halle (Germany)

2010-03-15

Although skeletal muscles comprise nearly 50% of the total human body mass and are well vascularised, metastases in the musculature are rare. The reported prevalence of skeletal muscle metastases from post-mortem studies of patients with cancer is inconstant and ranges from 0.03 to 17.5%. Of 5,170 patients with metastasised cancer examined and treated at our institution during the period from January 2000 to December 2007, 61 patients with muscle metastases (80 lesions) were identified on computed tomography (CT). Genital tumours (24.6%) were the most frequent malignancies metastasising into the skeletal musculature, followed by gastrointestinal tumours (21.3%), urological tumours (16.4%), and malignant melanoma (13.1%). Other primary malignancies were rarer, including bronchial carcinoma (8.2%), thyroid gland carcinoma (4.9%), and breast carcinoma (3.3%). In 8.2%, carcinoma of unknown primary was diagnosed. Skeletal muscle metastases (SMM) were located in the iliopsoas muscle (27.5%), paravertebral muscles (25%), gluteal muscles (16.3%), lower extremity muscles (12.5%), abdominal wall muscles (10%), thoracic wall muscles (5%), and upper extremity muscles (3.8%). Most (76.3%) of the 80 SMM were diagnosed incidentally during routine staging CT examinations, while 23.7% were symptomatic. Radiologically, SMM presented with five different types of lesions: focal intramuscular masses (type I, 52.5% of SMM), abscess-like intramuscular lesions (type II, 32.5%), diffuse metastatic muscle infiltration (type III, 8.8%), multifocal intramuscular calcification (type IV, 3.7%) and intramuscular bleeding (type V, 2.5%). (orig.)

Natural Mallow Fiber-Reinforced Epoxy Composite for Ballistic Armor Against Class III-A Ammunition

Science.gov (United States)

Nascimento, Lucio Fabio Cassiano; Holanda, Luane Isquerdo Ferreira; Louro, Luis Henrique Leme; Monteiro, Sergio Neves; Gomes, Alaelson Vieira; Lima, Édio Pereira

2017-10-01

Epoxy matrix composites reinforced with up to 30 vol pct of continuous and aligned natural mallow fibers were for the first time ballistic tested as personal armor against class III-A 9 mm FMJ ammunition. The ballistic efficiency of these composites was assessed by measuring the dissipated energy and residual velocity after the bullet perforation. The results were compared to those in similar tests of aramid fabric (Kevlar™) commonly used in vests for personal protections. Visual inspection and scanning electron microscopy analysis of impact-fractured samples revealed failure mechanisms associated with fiber pullout and rupture as well as epoxy cracking. As compared to Kevlar™, the mallow fiber composite displayed practically the same ballistic efficiency. However, there is a reduction in both weight and cost, which makes the mallow fiber composites a promising material for personal ballistic protection.

Clinical evaluation of skeletal scintigraphy with sup(99m)Tc-pyrophosphate

Energy Technology Data Exchange (ETDEWEB)

Sugiura, I; Sasaki, T; Kaneko, M; Watanabe, M [Nagoya Univ. (Japan). Faculty of Medicine

1975-04-01

Following about 10 mCi of intravenous administration of sup(99m)Tc-pyrophosphate, skeletal scintiphotography was performed in various skeletal diseases. Skeletal scintiphotograms were taken at about 2 to 3 hours after the administration of the radioisotope with Nuclear Chicago Rho/Gamma III scinticamera. The frontal, occipital and bilateral views of the skull, posterior and lateral views of the spine, anterior and posterior views of ribs, anterior and posterior views of the pelvis and either anterior and posterior views of extremities were scintiphotographed. 17 cases were studied of primary bone tumor (7 benign, 10 malignant), 20 cases of osseous metastasis and 20 cases of non-tumorous conditions. In malignant and benign bone tumors radioactivity is increased at the site of bony changes except for myeloma and leukaemia. In osseous metastasis radioactivity is increased at the site of lesion, even in the early stage. In non-tumorous conditions, radioactivity is also increased at the site of bony changes except for old healed osteomyelitis, old healed tuberculosis of bone and osteoporosis in Cushing's syndrome.

Relative Skeletal Muscle Mass Is Associated with Development of Metabolic Syndrome

Directory of Open Access Journals (Sweden)

Byung Sam Park

2013-12-01

Full Text Available BackgroundVisceral adiposity is related to insulin resistance. Skeletal muscle plays a central role in insulin-mediated glucose disposal; however, little is known about the association between muscle mass and metabolic syndrome (MS. This study is to clarify the clinical role of skeletal muscle mass in development of MS.MethodsA total of 1,042 subjects were enrolled. Subjects with prior MS and chronic diseases were excluded. After 24 months, development of MS was assessed using NCEP-ATP III criteria. Skeletal muscle mass (SMM; kg, body fat mass (BFM; kg, and visceral fat area (VFA; cm2 were obtained from bioelectrical analysis. Then, the following values were calculated as follows: percent of SMM (SMM%; %: SMM (kg/weight (kg, skeletal muscle index (SMI; kg/m2: SMM (kg/height (m2, skeletal muscle to body fat ratio (MFR: SMM (kg/BFM (kg, and skeletal muscle to visceral fat ratio (SVR; kg/cm2: SMM (kg/VFA (cm2.ResultsAmong 838 subjects, 88 (10.5% were newly diagnosed with MS. Development of MS increased according to increasing quintiles of BMI, SMM, VFA, and SMI, but was negatively associated with SMM%, MFR, and SVR. VFA was positively associated with high waist circumference (WC, high blood pressure (BP, dysglycemia, and high triglyceride (TG. In contrast, MFR was negatively associated with high WC, high BP, dysglycemia, and high TG. SVR was negatively associated with all components of MS.ConclusionRelative SMM ratio to body composition, rather than absolute mass, may play a critical role in development of MS and could be used as a strong predictor.

Orthodontic treatment for prominent lower front teeth (Class III malocclusion) in children.

Science.gov (United States)

Watkinson, Simon; Harrison, Jayne E; Furness, Susan; Worthington, Helen V

2013-09-30

Prominent lower front teeth (termed reverse bite; under bite; Class III malocclusion) may be due to a combination of the jaw or tooth positions or both. The upper jaw (maxilla) can be too far back or the lower jaw (mandible) too far forward, or both. Prominent lower front teeth can also occur if the upper front teeth (incisors) are tipped back or the lower front teeth are tipped forwards, or both. Various treatment approaches have been described to correct prominent lower front teeth in children and adolescents. To assess the effects of orthodontic treatment for prominent lower front teeth in children and adolescents. We searched the following databases: Cochrane Oral Health Group's Trials Register (to 7 January 2013), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2012, Issue 12), MEDLINE via OVID (1946 to 7 January 2013), and EMBASE via OVID (1980 to 7 January 2013). Randomised controlled trials (RCTs) recruiting children or adolescents or both (aged 16 years or less) receiving any type of orthodontic treatment to correct prominent lower front teeth (Class III malocclusion). Orthodontic treatments were compared with control groups who received either no treatment, delayed treatment or a different active intervention. Screening of references, identification of included and excluded studies, data extraction and assessment of the risk of bias of the included studies was performed independently and in duplicate by two review authors. The mean differences with 95% confidence intervals were calculated for continuous data. Meta-analysis was only undertaken when studies of similar comparisons reported comparable outcome measures. A fixed-effect model was used. The I2 statistic was used as a measure of statistical heterogeneity. Seven RCTs with a total of 339 participants were included in this review. One study was assessed as at low risk of bias, three studies were at high risk of bias, and in the remaining three studies risk of bias

Tratamento compensatorio da má oclusnao de classe lll: revisão de literatura

OpenAIRE

Dílio, Rogério Cássio [UNESP; Micheletti, Kelly Regina [UNESP; Cuoghi, Osmar Aparecido [UNESP; Bertoz, André Pinheiro de Magalhães [UNESP

2014-01-01

Class III malocclusion is less common occlusal relationship, covering less than 5% of the population. There are various forms of treatment in Class III malocclusion. Depending on how the form is expressed Class III and age of the patient, the therapy may be orthopedic and orthodontic surgical orthodontics. The objective was to review the literature of the last 10 years about ways to compensatory treatment of Class III malocclusion. Several articles were published between 04/2003 and 04/2013 i...

Expression of class III beta tubulin in cervical cancer patients administered preoperative radiochemotherapy: correlation with response to treatment and clinical outcome.

Science.gov (United States)

Ferrandina, Gabriella; Martinelli, Enrica; Zannoni, Gian Franco; Distefano, Mariagrazia; Paglia, Amelia; Ferlini, Cristiano; Scambia, Giovanni

2007-02-01

Alterations of the beta subunit of tubulin have been reported to be predictive of resistance to radiation and antitubulin agents in several solid tumors. The aim of the study was to investigate the clinical role of beta III tubulin expression as prognostic factor for survival and as a predictive parameter of response to preoperative radiochemotherapy in a single institutional series of locally advanced cervical cancer (LACC) patients. The study included 98 LACC patients admitted to the Gynecologic Oncology Unit, Catholic University of Rome and Campobasso between January 1998 and January 2005. Immunohistochemistry was performed by using the polyclonal rabbit anti-beta III tubulin antibody (Covance, Princeton, NJ, USA). The value of 10% immunostained tumor cells was arbitrarily chosen as cut-off value to distinguish cases with high versus low beta III tubulin content. In the whole series, beta III tubulin immunoreaction was detectable in 66/98 cases (67.3%), and the percentage of positively stained cells ranged from 0 to 100% (median=10%). The percentages of cases with high beta III tubulin expression were shown not to be differently distributed according to clinico-pathological characteristics. There was no statistically significant difference in the distribution of cases with high beta III tubulin expression according to clinical and pathological response to treatment. During the follow-up period, recurrence and death of disease occurred in 15 and 13 cases, respectively. There was no difference in disease-free and overall survival in cases with high versus low beta III tubulin expression. The assessment of class III beta tubulin status seems of little usefulness in order to identify LACC patients with poor chance of response to concomitant radiochemotherapy and unfavorable prognosis.

Cloning and functional characterization of a class III chitinase gene ...

African Journals Online (AJOL)

Analysis of the VvChiF III amino acid sequence showed that this gene corresponds to the Glyco-hydro-18 super family that consisting of a signal peptide with the length of 25 amino acids. Purified VvChiF III showed chitinase activity toward the soluble substrate, glycolchitin and antifungal activity against Botrytis cinerea.

Effects of the functional regulator III on transversal changes: a postero-anterior cephalometric and model study.

Science.gov (United States)

Kilic, Nihat; Celikoglu, Mevlüt; Oktay, Hüsamettin

2011-12-01

Studies assessing the transversal treatment changes caused by the functional regulator III (FR-3) are limited in number. This clinical study was planned to analyse the transversal effects of the FR-3 appliance therapy. The treatment group consisted of 17 patients (8 males and 9 females) with Class III malocclusion, who were treated with the FR-3 appliance. The control group consisted of 17 subjects (7 males and 10 females) with a normal occlusion. Mean ages of the subjects were 10.73 and 10.66 years in the treatment and control groups, respectively. Postero-anterior radiographs and stone casts were obtained before (T1) and after (T2) treatment/observation. The results of the Student's t-test comparing initial values showed that maxillary dentoalveolar and skeletal widths are significantly larger in the control group than those in the treatment group. At the end of the treatment, significant transverse increments occurred only at the dentoalveolar level of the maxilla. The transversal changes in the mandible were not statistically significant. Buccal shields of FR-3 did not stimulate the growth of maxillary apical base but caused an enhanced and supplementary widening of maxillary dental and alveolar structures.

Cardiac troponin T and fast skeletal muscle denervation in ageing.

Science.gov (United States)

Xu, Zherong; Feng, Xin; Dong, Juan; Wang, Zhong-Min; Lee, Jingyun; Furdui, Cristina; Files, Daniel Clark; Beavers, Kristen M; Kritchevsky, Stephen; Milligan, Carolanne; Jin, Jian-Ping; Delbono, Osvaldo; Zhang, Tan

2017-10-01

) decreased the levels of gene expression of muscle denervation markers; and (iii) enhanced neurotransmission efficiency at NMJ. Cardiac troponin T at the NMJ region contributes to NMJ functional decline with ageing mainly in the fast-twitch skeletal muscle through interfering with PKA signalling. This knowledge could inform useful targets for prevention and therapy of age-related decline in muscle function. © 2017 The Authors. Journal of Cachexia, Sarcopenia and Muscle published by John Wiley & Sons Ltd on behalf of the Society on Sarcopenia, Cachexia and Wasting Disorders.

Class III beta-tubulin is constitutively coexpressed with glial fibrillary acidic protein and nestin in midgestational human fetal astrocytes: implications for phenotypic identity

Czech Academy of Sciences Publication Activity Database

Dráberová, Eduarda; Del Valle, L.; Gordon, J.; Marková, Vladimíra; Šmejkalová, Barbora; Bertrand, L.; de Chadarévian, J.-P.; Agamanolis, D.P.; Legido, A.; Khalili, K.; Dráber, Pavel; Katsetos, C.D.

2008-01-01

Roč. 67, č. 4 (2008), s. 341-354 ISSN 0022-3069 R&D Projects: GA MŠk LC545; GA ČR GA204/05/2375 Institutional research plan: CEZ:AV0Z50520514 Keywords : astrocytes * class III beta-tubulin * fetal glia Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 5.140, year: 2008

Prosthetic rehabilitation of severe Siebert′s Class III defect with modified Andrews bridge system

Directory of Open Access Journals (Sweden)

Manu Rathee

2015-01-01

Full Text Available Prosthetic dentistry involves the replacement of missing and contiguous tissues with artificial substitutes to restore and maintain the oral functions, appearance, and health of the patient. The treatment of edentulous areas with ridge defects poses a challenging task for the dentist. Management of such cases involves a wide range of treatment options comprising mainly of surgical interventions and non surgical techniques such as use of removable, fixed or fixed- removable partial dentures. But each treatment plan undertaken should be customized according to patient needs. A variety of factors such as quality and quantity of existing contiguous hard and soft tissues, systemic condition and economic status of the patient play an important role in treatment planning, clinical outcome and prognosis. This case report presents the restoration of a Seibert′s Class III ridge defect by an economical modification of Andrews Bridge in a 32 Year old patient.

Orthodontic treatment of nongrowing patient with class II division 2 malocclusion by Herbst appliance

Directory of Open Access Journals (Sweden)

Nedeljković Nenad

2009-01-01

Full Text Available Background. Inheritance is most casual etiological factor of Class II division 2 malocclusion. This kind of malocclusion is very difficult for treatment specially in older patients. Case report. In the female patient, 20 years old, at the beginning of the treatment at the School of Dentistry in Belgrade, lateral cephalogram showed skeletal and dentoalveolar Class II division 2 malocclusion. She was in the Herbst treatment for 8 months and 12 months more with a fixed multibracket appliance. The measurements were performed on lateral cephalograms before and after the treatment: ii, is, mi, ms, Pg and ss. The distance from these points to occlusal perpendicular line (Olp were measured and compared from cephalogram before to cephalogram after the treatment. Temporomandibular joint (TMJ tomograms were compared from before and after the treatment by superimposition. Correction was found in molar and incisor relation, overjet and overbite. There were found sagital skeletal changes and soft tissue profile improvement. Conclusion. Herbst appliance is effective in the treatment of Class II malocclusions, even in adult patients. Dental and skeletal changes as a result of Herbst treatment could be good choice instead of camouflage orthodontics or surgical decision.

Facial attractiveness of skeletal class I and class II malocclusion as perceived by laypeople, patients and clinicians.

Science.gov (United States)

Pace, Michela; Cioffi, Iacopo; D'antò, Vincenzo; Valletta, Alessandra; Valletta, Rosa; Amato, Massimo

2018-06-01

Physical attractiveness is dependent on facial appearance. The facial profile plays a crucial role in facial attractiveness and can be improved with orthodontic treatment. The aesthetic assessment of facial appearance may be influenced by the cultural background and education of the assessor and dependent upon the experience level of dental professionals. This study aimed to evaluate how the sagittal jaw relationship in Class I and Class II individuals affects facial attractiveness, and whether the assessor's professional education and background affect the perception of facial attractiveness. Facial silhouettes simulating mandibular retrusion, maxillary protrusion, mandibular retrusion combined with maxillary protrusion, bimaxillary protrusion and severe bimaxillary protrusion in class I and class II patients were assessed by five groups of people with different backgrounds and education levels (i.e., 23 expert orthodontists, 21 orthodontists, 15 maxillofacial surgeons, 19 orthodontic patients and 28 laypeople). Straight facial profiles were judged to be more attractive than convex profiles due to severe mandibular retrusion and to mandibular retrusion combined with maxillary protrusion (all Pattractive by clinicians than by patients and laypeople (all Pattractive than Class I profiles. The assessment of facial attractiveness is dependent on the assessor's education and background. Laypeople and patients are considerably less sensitive to abnormal sagittal jaw relationships than orthodontists.

Long-term skeletal stability after maxillary advancement with distraction osteogenesis in nongrowing patients.

Science.gov (United States)

Kanno, Takahiro; Mitsugi, Masaharu; Hosoe, Michi; Sukegawa, Shintaro; Yamauchi, Kensuke; Furuki, Yoshihiko

2008-09-01

We assessed the long-term skeletal stability of the repositioned maxilla, midface in patients who underwent maxillary advancement using distraction osteogenesis (DO). The study included 19 nongrowing patients with maxillary hypoplasia with a Class III relationship, a normally developed mandible, and follow-up after DO exceeding 2 years. Eleven men and 8 women participated, with a mean age at treatment of 20.7 years (range 15.4-33.4 years). Twelve patients had midfacial hypoplasia associated with a cleft lip and palate (CLP), and 7 patients had developed noncleft-related hypoplasia. The surgical treatment included our modified Le Fort I osteotomy in combination with intraoral (5 cases) or extraoral (14 cases) distraction devices. Distraction was started after a latency period of 5 to 7 days and continued until the proper convexity was obtained. After active distraction, a 3- to 4-week period of retention was allowed, followed by rigid internal fixation (IF) with or without distractor removal. Lateral cephalometric films before midfacial distraction (T0), after IF with or without distractor removal (T1), 6 months after T1 (T2), and 2 or more years (mean 2.8 years) after T1 (T3) were analyzed. The maxillary A-point in the Frankfort horizontal reference plane was used to assess the skeletal changes in the maxillary position (x, y) at each time point (T1-T3). In addition, we analyzed the differences in the devices and techniques. Midfacial DO was successful in all cases, resulting in a mean change obtained at point A of 10.3 mm (8.4 mm horizontally, 4.7 mm inferiorly). Point A underwent a moderate amount of skeletal relapse at T2 [0.4 mm (5%) horizontally and 0.6 mm (13%) superiorly], with a mean of 8% (0.6 mm) horizontally and 19% (1.0 mm) superiorly over the mean 2.8-year (2.0-4.8 years) follow-up. After long-term follow-up, the maxillary advancement with DO was stable in both CLP and non-CLP patients with maxillary hypoplasia. In addition, our original technique

Ribonucleotide reductase class III, an essential enzyme for the anaerobic growth of Staphylococcus aureus, is a virulence determinant in septic arthritis.

Science.gov (United States)

Kirdis, Ebru; Jonsson, Ing-Marie; Kubica, Malgorzata; Potempa, Jan; Josefsson, Elisabet; Masalha, Mahmud; Foster, Simon J; Tarkowski, Andrzej

2007-01-01

Staphylococcus aureus is the most common cause of joint infections. It also contributes to several other diseases such as pneumonia, osteomyelitis, endocarditis, and sepsis. Bearing in mind that S. aureus becomes rapidly resistant to new antibiotics, many studies survey the virulence factors, with the aim to find alternative prophylaxis/treatment regimens. One potential virulence factor is the bacterial ability to survive at different oxygen tensions. S. aureus expresses ribonucleotide reductases (RNRs), which help it to grow under both aerobic and anaerobic conditions, by reducing ribonucleotides to deoxyribonucleotides. In this study, we investigated the role of RNR class III, which is required for anaerobic growth, as a virulence determinant in the pathogenesis of staphylococcal arthritis. The wild-type S. aureus strain and its isogenic mutant nrdDG mutant were inoculated intravenously into mice. Mice inoculated with the wild-type strain displayed significantly more severe arthritis, with significantly more synovitis and destruction of the bone and cartilage versus mutant strain inoculated mice. Further, the persistence of bacteria in the kidneys was significantly more pronounced in the group inoculated with the wild-type strain. Together these results indicate that RNR class III is an important virulence factor for the establishment of septic arthritis.

Maxillary Advancement for Unilateral Crossbite in a Patient with Sleep Apnea Syndrome.

Science.gov (United States)

Hoshijima, Mitsuhiro; Honjo, Tadashi; Moritani, Norifumi; Iida, Seiji; Yamashiro, Takashi; Kamioka, Hiroshi

2015-01-01

This article reports the case of a 44-year-old male with skeletal Class III, Angle Class III malocclusion and unilateral crossbite with concerns about obstructive sleep apnea syndrome (OSAS), esthetics and functional problems. To correct the skeletal deformities, the maxilla was anteriorly repositioned by employing LeFort I osteotomy following pre-surgical orthodontic treatment, because a mandibular setback might induce disordered breathing and cause OSAS. After active treatment for 13 months, satisfactory occlusion was achieved and an acceptable facial and oral profile was obtained. In addition, the apnea hypopnea index (AHI) decreased from 18.8 preoperatively to 10.6 postoperatively. Furthermore, after a follow-up period of 7 months, the AHI again significantly decreased from 10.6 to 6.2. In conclusion, surgical advancement of the maxilla using LeFort I osteotomy has proven to be useful in patients with this kind of skeletal malocclusion, while preventing a worsening of the OSAS.

Application for Permit to Operate a Class III Solid Waste Disposal Site at the Nevada Test Site - U10c Disposal Site

Energy Technology Data Exchange (ETDEWEB)

NSTec Environmental Programs

2010-08-05

The NTS is located approximately 105 km (65 mi) northwest of Las Vegas, Nevada. NNSA/NSO is the federal lands management authority for the NTS and NSTec is the Management & Operations contractor. Access on and off the NTS is tightly controlled, restricted, and guarded on a 24-hour basis. The NTS is posted with signs along its entire perimeter. NSTec is the operator of all solid waste disposal sites on the NTS. The U10C Disposal Site is located in the northwest corner of Area 9 at the NTS (Figure 1) and is located in a subsidence crater created by two underground nuclear events, one in October 1962 and another in April 1964. The disposal site opened in 1971 for the disposal of rubbish, refuse, pathological waste, asbestos-containing material, and industrial solid waste. A Notice of Intent form to operate the disposal site as a Class II site was submitted to the state of Nevada on January 26, 1994, and was acknowledged in a letter to the DOE on February 8, 1994. It operated as a state of Nevada Class II Solid Waste Disposal Site (SWDS) until it closed on October 5, 1995, for retrofit as a Class III SWDS. The retrofit consisted of the installation of a minimum four-foot compacted soil layer to segregate the different waste types and function as a liner to inhibit leachate and water flow into the lower waste zone. Five neutron monitoring tubes were installed in this layer to monitor possible leachate production and water activity. Upon acceptance of the installed barrier and approval of an Operating Plan by NDEP/BFF, the site reopened in January 1996 as a Class III SWDS for the disposal of industrial solid waste and other inert waste.

Morphological caracteristics of malocclusion class II

Directory of Open Access Journals (Sweden)

Pavlović J.

2015-01-01

Full Text Available Class II malocclusion are complex anomalies of the skeletal and dental systems. The aim of this study is that the rengenkefalometrics analysis closer determine the morphological characteristics of this malocclusion. For this study were used 30 patients aged 18-30, previously clinically diagnosed class II, before the planned orthodontic treatment. The results analisis lateral cephalometric radiographs were compared with the 30 patients with class I malocclusion. Analyzed three linear and two angular cranial base dimensions and nine angular and four linear measures from the facial skeleton. The Results show: No statistically significant differensis in cranial base angle (SNBa and anterior cranial base length (S-N between class II and control Class I. Angle maxillar prognathism ( SNA is no signifikant different between class I and Class II but SNB angle were signifikant smaller. The length of maxillary base (A'-SnP is longer and the length of mandibule (Pg'-MT1/MT is signifficantly smaller. The gonial angle (ArGo-Me was smaller with open articular angle (GoArSN. Morphological characteristics of class II malocclusion are , retrognathic and smaller mandibular ligth, normognathic and longer maxilla, open articular angle with vertical tendency of the craniofacial growth pattern.

Skeletal muscle tissue engineering: methods to form skeletal myotubes and their applications.

Science.gov (United States)

Ostrovidov, Serge; Hosseini, Vahid; Ahadian, Samad; Fujie, Toshinori; Parthiban, Selvakumar Prakash; Ramalingam, Murugan; Bae, Hojae; Kaji, Hirokazu; Khademhosseini, Ali

2014-10-01

Skeletal muscle tissue engineering (SMTE) aims to repair or regenerate defective skeletal muscle tissue lost by traumatic injury, tumor ablation, or muscular disease. However, two decades after the introduction of SMTE, the engineering of functional skeletal muscle in the laboratory still remains a great challenge, and numerous techniques for growing functional muscle tissues are constantly being developed. This article reviews the recent findings regarding the methodology and various technical aspects of SMTE, including cell alignment and differentiation. We describe the structure and organization of muscle and discuss the methods for myoblast alignment cultured in vitro. To better understand muscle formation and to enhance the engineering of skeletal muscle, we also address the molecular basics of myogenesis and discuss different methods to induce myoblast differentiation into myotubes. We then provide an overview of different coculture systems involving skeletal muscle cells, and highlight major applications of engineered skeletal muscle tissues. Finally, potential challenges and future research directions for SMTE are outlined.

Similar [DE]XXXL[LI] motifs differentially target GLUT8 and GLUT12 in Chinese Hamster Ovary Cells

OpenAIRE

Flessner, Lauren B.; Moley, Kelle H.

2008-01-01

The transport of glucose across cell membranes is mediated by facilitative glucose transporters. The recently identified Class III glucose transporter GLUT12 is predominantly expressed in insulin-sensitive tissues such as heart, fat, and skeletal muscle. We examined the subcellular localization of GLUT12 in CHO and HEK293 cells stably expressing murine GLUT12. We have previously shown that another Class III glucose transporter, GLUT8, contains a [DE]XXXL[LI] motif that directs it to late endo...

Thin-plate spline (TPS) graphical analysis of the mandible on cephalometric radiographs.

Science.gov (United States)

Chang, H P; Liu, P H; Chang, H F; Chang, C H

2002-03-01

We describe two cases of Class III malocclusion with and without orthodontic treatment. A thin-plate spline (TPS) analysis of lateral cephalometric radiographs was used to visualize transformations of the mandible. The actual sites of mandibular skeletal change are not detectable with conventional cephalometric analysis. These case analyses indicate that specific patterns of mandibular transformation are associated with Class III malocclusion with or without orthopaedic therapy, and visualization of these deformations is feasible using TPS graphical analysis.

Three dimensional Cone Beam Computed Tomography Study of Pharyngeal Airway Dimensions in Different Anteroposterior Skeletal Classification Patients

Science.gov (United States)

2015-07-10

CBCT Technology 7. Intended publication/meeting: Requirement for Masters in Oral Biology 8. "Required by" date: 01Jul15 9. Date of submission for...compared to Class I patients10. They divided 45 children into Class I and Class III groups. Class III patients had larger and flatter oropharyngeal...who had soft tissue pathology detected in the scans or their medical history, previous Orthognathic surgery, or a syndrome diagnosis were excluded

Maxillary molar distalization with first class appliance.