WorldWideScience

Sample records for size head size

  1. Humeral head size in shoulder arthroplasty

    DEFF Research Database (Denmark)

    Vaesel, M T; Olsen, Bo Sanderhoff; Søjbjerg, Jens Ole

    1998-01-01

    Changes in kinematics after hemiarthroplasty of the glenohumeral joint were investigated in nine cadaveric specimens. During experiments the influence of the humeral head size on glenohumeral kinematics was evaluated. A modular prosthesis with five different head sizes and press-fit stems was used....... Three-dimensional kinematic measurements during abduction and adduction from 0 degree to 70 degrees showed increased external rotation with increasing head size. Small prosthetic heads translated inferiorly and large prosthetic heads superiorly compared with the intact humeral head. During forced...... anterior and posterior translation the mobility is restricted with increasing head size. This study found that when a press-fit prosthesis is used, it takes 1.25 times the volume of the intact humeral head to reconstruct the kinematics of the glenohumeral joint....

  2. The scaling of eye size in adult birds: relationship to brain, head and body sizes.

    Science.gov (United States)

    Burton, Richard F

    2008-10-01

    Birds' eyes seem often to be about as large as head size allows and brain size is taken here as a measure of the ill-defined space that is available to accommodate them. In four data sets for non-passerines eye size relates more strongly to brain size than to body mass and most non-passerine data are consistent with eye:brain (or eye:head-space) isometry. Eye:body allometry thus seems to follow from a negative head-space:body allometry. In passerines the eye:brain size correlations seem to be secondary to strong eye:body, brain:body, and perhaps therefore head-space:body correlations, a difference attributed to the passerines' greater anatomical uniformity.

  3. Effect of head size on 10B dose distribution

    International Nuclear Information System (INIS)

    Gupta, N.; Blue, T.E.; Gahbauer, R.

    1992-01-01

    Boron neutron capture therapy (BNCT) for treatment of brain tumors is based on the utilization of large epithermal-neutron fields. Epithermal neutrons thermalize at depths of ∼2.5 cm inside the head and provide a maximum thermal fluence at deep-seated tumor sites with minimum damage to normal tissue. Brain tissue is a highly scattering medium for epithermal and thermal neutrons; therefore, a broad treatment field enables epithermal neutrons to enter the head over a large area. These neutrons slow down as they undergo scattering collisions and contribute to the thermal-neutron fluence at the tumor location. With the use of large neutron fields, the size of the head affects the thermal-neutron distribution and thereby the 10 B absorbed dose distribution inside the head. In this paper, the authors describe measurements using a boron trifluoride (BF 3 )-filled proportional counter to determine the effect of head size on 10 B absorbed dose distributions for a broad field accelerator epithermal-neutron source

  4. Head size and growth in the very preterm infant: a literature review

    Directory of Open Access Journals (Sweden)

    Lee KA

    2015-01-01

    Full Text Available Karla A Lee, Breda C Hayes Rotunda Hospital, Dublin 1, Leinster, Ireland Objective: To review the literature investigating head size and examine head growth in relation to neurodevelopmental outcomes and neuroimaging data in the very preterm infant.Methods: Systematic literature review of studies published in the following databases: PubMed/Medline, Cochrane Central Register of Controlled Trials (CENTRAL, Cumulative Index to Nursing and Allied Health (CINAHL, and Excerpta Medica dataBASE (EMBASE. Studies in the English language published between January 2005 and August 2013 were examined. Subjects were infants born at ≤32 weeks of gestation. Main outcome measures included head growth, neurodevelopmental outcomes, and correlation between head size and neuroimaging.Results: Thirty-four articles comprising 9,394 infants met inclusion/exclusion criteria. Of these, 31 studies (6,592 subjects report head growth data measured at two or more time points. Neurodevelopmental outcome at ≥2 years was reported by eleven studies (3,817 subjects. Nine studies (2,363 subjects included neuroimaging data. Catch-up head growth was found to occur in the first year after birth. Poor nutrition was linked with poorer head growth. Small head size was associated with poor psychomotor and mental skills, higher rates of cerebral palsy, and autism. However, suboptimal head size at birth was not predictive of poor outcome, unless it persisted. Head size appears to correlate with brain volume at term. Associations between white matter abnormalities have been found by ultrasonography. In contrast, in magnetic resonance imaging (MRI studies, gray matter seems to be the most susceptible to impairments during postnatal growth.Conclusion: Head growth in early neonatal life is of importance. Avoiding growth impairment during neonatal care may allow for optimal cortical development. Many factors impact upon early head growth, particularly appropriate nutrition. There is no

  5. Ideal femoral head size in total hip arthroplasty balances stability and volumetric wear.

    Science.gov (United States)

    Cross, Michael B; Nam, Denis; Mayman, David J

    2012-10-01

    Over the last several years, a trend towards increasing femoral head size in total hip arthroplasty to improve stability and impingement free range of motion has been observed. The specific questions we sought to answer in our review were: (1) What are the potential advantages and disadvantages of metal-on-metal, ceramic-on-ceramic, and metal-on-polyethylene bearings? (2) What is effect that femoral head size has on joint kinematics? (3) What is the effect that large femoral heads have on bearing surface wear? A PubMed search and a review of 2012 Orthopaedic Research Society abstracts was performed and articles were chosen that directly answered components of the specific aims and that reported outcomes with contemporary implant designs or materials. A review of the literature suggests that increasing femoral head size decreases the risk of postoperative dislocation and improves impingement free range of motion; however, volumetric wear increases with large femoral heads on polyethylene and increases corrosion of the stem in large metal-on-metal modular total hip arthroplasty (THA); however, the risk of potentially developing osteolysis or adverse reactions to metal debris respectively is still unknown. Further, the effect of large femoral heads with ceramic-on-ceramic THA is unclear, due to limited availability and published data. Surgeons must balance the benefits of larger head size with the increased risk of volumetric wear when determining the appropriate head size for a given patient.

  6. Postcopulatory sexual selection results in spermatozoa with more uniform head and flagellum sizes in rodents.

    Directory of Open Access Journals (Sweden)

    María Varea-Sánchez

    Full Text Available Interspecific comparative studies have shown that, in most taxa, postcopulatory sexual selection (PCSS in the form of sperm competition drives the evolution of longer and faster swimming sperm. Work on passserine birds has revealed that PCSS also reduces variation in sperm size between males at the intraspecific level. However, the influence of PCSS upon intra-male sperm size diversity is poorly understood, since the few studies carried out to date in birds have yielded contradictory results. In mammals, PCSS increases sperm size but there is little information on the effects of this selective force on variations in sperm size and shape. Here, we test whether sperm competition associates with a reduction in the degree of variation of sperm dimensions in rodents. We found that as sperm competition levels increase males produce sperm that are more similar in both the size of the head and the size of the flagellum. On the other hand, whereas with increasing levels of sperm competition there is less variation in head length in relation to head width (ratio CV head length/CV head width, there is no relation between variation in head and flagellum sizes (ratio CV head length/CV flagellum length. Thus, it appears that, in addition to a selection for longer sperm, sperm competition may select more uniform sperm heads and flagella, which together may enhance swimming velocity. Overall, sperm competition seems to drive sperm components towards an optimum design that may affect sperm performance which, in turn, will be crucial for successful fertilization.

  7. Maternal antecedents of infants with abnormal head sizes in southwest Nigeria: A community-based study

    Directory of Open Access Journals (Sweden)

    Bolajoko O Olusanya

    2012-01-01

    Full Text Available Objective: To identify the socio-demographic antecedents and pregnancy-related history of infants with abnormal head sizes in a developing country. Materials and Methods: An observational study of mother-infant pairs attending routine immunization clinics in an inner-city community in Lagos, Nigeria. Age and gender-specific head circumference was determined with the current Child Growth Standards of the World Health Organization (WHO. Factors independently associated with any abnormal head size (z-score 2SD, based on the adjusted odds ratio (OR and 95% confidence interval (CI, were explored with multiple logistic regression analyses. Results: Of the 5731 mothers studied, 730 (12.7% had an offspring with an abnormal head size. In the final regression model, teenage mothers (OR:1.86; CI:1.26 - 2.75, mothers with primary or no education (OR:1.65; P = 0.007, multiple pregnancies (OR:3.88; CI:2.53 - 5.95, and delivery in either private hospitals (OR:1.54; CI:1.22 - 1.95 or residential homes (OR:1.50; CI:1.05 - 2.14, compared to government hospitals, were significantly more likely to have offsprings with abnormal head sizes. Conclusions: Community-oriented public health education, targeting prospective mothers with multiple pregnancies, teenage girls, and women with little or no formal education on the potential risk of delivery outside public hospitals, may curtail the burden of abnormal head size of their offspring and reduce the pressure on the already overstretched rehabilitation services in resource-poor countries.

  8. Head circumference and brain size in autism spectrum disorder: A systematic review and meta-analysis.

    Science.gov (United States)

    Sacco, Roberto; Gabriele, Stefano; Persico, Antonio M

    2015-11-30

    Macrocephaly and brain overgrowth have been associated with autism spectrum disorder. We performed a systematic review and meta-analysis to provide an overall estimate of effect size and statistical significance for both head circumference and total brain volume in autism. Our literature search strategy identified 261 and 391 records, respectively; 27 studies defining percentages of macrocephalic patients and 44 structural brain imaging studies providing total brain volumes for patients and controls were included in our meta-analyses. Head circumference was significantly larger in autistic compared to control individuals, with 822/5225 (15.7%) autistic individuals displaying macrocephaly. Structural brain imaging studies measuring brain volume estimated effect size. The effect size is higher in low functioning autistics compared to high functioning and ASD individuals. Brain overgrowth was recorded in 142/1558 (9.1%) autistic patients. Finally, we found a significant interaction between age and total brain volume, resulting in larger head circumference and brain size during early childhood. Our results provide conclusive effect sizes and prevalence rates for macrocephaly and brain overgrowth in autism, confirm the variation of abnormal brain growth with age, and support the inclusion of this endophenotype in multi-biomarker diagnostic panels for clinical use. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  9. Portion size

    Science.gov (United States)

    ... with hummus. To control your portion sizes when eating out, try these tips: Order the small size. Instead of a medium or large, ask for the smallest size. By eating a small hamburger instead of a large, you ...

  10. Patient size and x-ray technique factors in head computed tomography examinations. II. Image quality

    International Nuclear Information System (INIS)

    Huda, Walter; Lieberman, Kristin A.; Chang, Jack; Roskopf, Marsha L.

    2004-01-01

    We investigated how patient head characteristics, as well as the choice of x-ray technique factors, affect lesion contrast and noise values in computed tomography (CT) images. Head sizes and mean Hounsfield unit (HU) values were obtained from head CT images for five classes of patients ranging from the newborn to adults. X-ray spectra with tube voltages ranging from 80 to 140 kV were used to compute the average photon energy, and energy fluence, transmitted through the heads of patients of varying size. Image contrast, and the corresponding contrast to noise ratios (CNRs), were determined for lesions of fat, muscle, and iodine relative to a uniform water background. Maintaining a constant image CNR for each lesion, the patient energy imparted was also computed to identify the x-ray tube voltage that minimized the radiation dose. For adults, increasing the tube voltage from 80 to 140 kV changed the iodine HU from 2.62x10 5 to 1.27x10 5 , the fat HU from -138 to -108, and the muscle HU from 37.1 to 33.0. Increasing the x-ray tube voltage from 80 to 140 kV increased the percentage energy fluence transmission by up to a factor of 2. For a fixed x-ray tube voltage, the percentage transmitted energy fluence in adults was more than a factor of 4 lower than for newborns. For adults, increasing the x-ray tube voltage from 80 to 140 kV improved the CNR for muscle lesions by 130%, for fat lesions by a factor of 2, and for iodine lesions by 25%. As the size of the patient increased from newborn to adults, lesion CNR was reduced by about a factor of 2. The mAs value can be reduced by 80% when scanning newborns while maintaining the same lesion CNR as for adults. Maintaining the CNR of an iodine lesion at a constant level, use of 140 kV increases the energy imparted to an adult patient by nearly a factor of 3.5 in comparison to 80 kV. For fat and muscle lesions, raising the x-ray tube voltage from 80 to 140 kV at a constant CNR increased the patient dose by 37% and 7

  11. Changes in femoral head size and growth rate in young children with severe developmental dysplasia of the hip.

    Science.gov (United States)

    Wanner, Matthew R; Loder, Randall T; Jennings, S Gregory; Ouyang, Fangqian; Karmazyn, Boaz

    2017-12-01

    Developmental dysplasia of the hip (DDH) is known to result in smaller femoral head size in toddlers; however, alterations in femoral head size and growth have not been documented in infants. To determine with ultrasound (US) whether femoral head size and growth are altered in infants (younger than 1 year of age) with severe DDH. We identified all patients at our tertiary care children's hospital from 2002 to 2014 who underwent US for DDH. We included studies with at least one hip with severe DDH, defined as DDH. We constructed a control group of randomized patients with normal US studies. Two pediatric radiologists blinded to diagnosis measured bilateral femoral head diameter. Inter-reader variability and femoral head diameter difference between dislocated and contralateral normal femoral heads were evaluated. Mean femoral head diameters were compared across types of hip joint; femoral head growth rates per month were calculated. Thirty-seven children with DDH (28 female) were identified (median age: 33 days). The control group contained 75 children (47 female) with a median age of 47 days. Fifty-three of the 74 hips in the study group had severe DDH. Twenty-four children with DDH had completely dislocated hips (nine bilateral, five with contralateral severe subluxations). Thirteen other children had severe subluxation, two bilaterally. There was good inter-reader agreement in the normal femoral head group and moderate agreement in the severe DDH group. In the study group, severe DDH femoral head diameter was significantly smaller than their contralateral normal hip. Severe DDH femoral head diameter was significantly smaller than normal femoral head diameter in the control group. The severe DDH femoral head growth rate was slightly less but not significantly slower than normal femoral head growth rate in the study group. On US during infancy, femoral head size is significantly reduced in severe cases of DDH.

  12. Head size at birth in neonates with transposition of great arteries and hypoplastic left heart syndrome.

    Science.gov (United States)

    Manzar, Shabih; Nair, Arun K; Pai, Mangalore G; Al-Khusaiby, Saleh M

    2005-03-01

    Appropriate fetal brain growth depends upon the cerebral blood flow (CBF). Different congenital heart defects (CHDs), due to the difference in anatomy and physiology, alter the intrauterine CBF. Thus, variable brain growth is expected in different CHDs that is reflected by variability in the head circumference (HC) at birth. The present study was carried out to compare the HC of babies born with transposition of great arteries (TGA) and hypoplastic left heart syndrome (HLHS) in comparison to normal control. The data on the HC of neonates with TGA and HLHS were extracted from the computer database then compared with the control group. During the period from January 1996 to December 2003, a total of 7396 neonates were admitted, out of which 639 (8.6%) were admitted with the diagnosis of the CHD. After correcting for gestational age and non-availability of HC measurements, 236 infants were excluded. Out of the remaining 403 term appropriate for gestational age (AGA) infants, 46 had TGA while 28 had HLHS. The control group comprised of a total of 74 term AGA infants. The mean HC for the control group was noted to be 34.4 +/- 1.7 centimeters (cms), 33.7 +/- 1.5 cms for TGA while it was 32.9 +/- 1.3 cms for HLHS. The head size at birth for newborn with HLHS was significantly smaller than the TGA (p=0.03) and control group (p=0.001). Similarly, HC of TGA group was significantly smaller than the control group (p=0.02). The newborns with TGA and HLHS are found to have significantly small head size at birth. The clinical significance of this finding with respect to the neurodevelopmental outcome and value of early antenatal intervention to repair these defects remains to be evaluated in further studies.

  13. Sustainable Sizing.

    Science.gov (United States)

    Robinette, Kathleen M; Veitch, Daisy

    2016-08-01

    To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically

  14. Exploring Size.

    Science.gov (United States)

    Brand, Judith, Ed.

    1995-01-01

    "Exploring" is a magazine of science, art, and human perception that communicates ideas museum exhibits cannot demonstrate easily by using experiments and activities for the classroom. This issue concentrates on size, examining it from a variety of viewpoints. The focus allows students to investigate and discuss interconnections among…

  15. Size matter!

    DEFF Research Database (Denmark)

    Hansen, Pelle Guldborg; Jespersen, Andreas Maaløe; Skov, Laurits Rhoden

    2015-01-01

    the hypothesis that a decrease in the size of food plates may lead to significant reductions in food waste from buffets. It supports and extends the set of circumstances in which a recent experiment found that reduced dinner plates in a hotel chain lead to reduced quantities of leftovers....

  16. Effect of ice surface size on collision rates and head impacts at the World Junior Hockey Championships, 2002 to 2004.

    Science.gov (United States)

    Wennberg, Richard

    2005-03-01

    To determine if collision rates and head impacts in elite junior hockey differed between games played on the small North American ice surface (85 ft wide), an intermediate-size Finnish ice surface (94 ft wide), and the large standard international ice surface (100 ft wide). Videotape analysis of all games involving Team Canada from the 2002 (large ice, Czech Republic), 2003 (small ice, Canada), and 2004 (intermediate ice, Finland) World Junior Championships. All collisions were counted and separated into various categories (volitional player/player bodychecks, into boards or open ice, plus accidental/incidental player/boards, player/ice, head/stick, head/puck). Further subdivisions included collisions involving the head directly or indirectly and notably severe head impacts. Small, intermediate, and large ice surface mean collisions/game, respectively, were 295, 258, 222, total collisions; 251, 220, 181, volitional bodychecks; 126, 115, 88, into boards; 125, 106, 93, open ice; 71, 52, 44, total head; 44, 36, 30, indirect head; 26, 16, 13, direct head; and 1.3, 0.5, 0.3, severe head (P < 0.05 for small-intermediate ice and intermediate-large ice differences in total collisions; P < 0.005 for small-large ice difference; P < 0.05 for small-intermediate ice differences in head impacts; P < 0.01 for small-large ice differences in total and severe head impacts). There is a significant inverse correlation between ice size and collision rates in elite hockey, including direct, indirect, and severe head impacts. These findings suggest that uniform usage of the larger international rinks could reduce the risk of injury, and specifically, concussions in elite hockey by decreasing the occurrence of collisions and head impacts.

  17. Dependence of micelle size and shape on detergent alkyl chain length and head group.

    Science.gov (United States)

    Oliver, Ryan C; Lipfert, Jan; Fox, Daniel A; Lo, Ryan H; Doniach, Sebastian; Columbus, Linda

    2013-01-01

    Micelle-forming detergents provide an amphipathic environment that can mimic lipid bilayers and are important tools for solubilizing membrane proteins for functional and structural investigations in vitro. However, the formation of a soluble protein-detergent complex (PDC) currently relies on empirical screening of detergents, and a stable and functional PDC is often not obtained. To provide a foundation for systematic comparisons between the properties of the detergent micelle and the resulting PDC, a comprehensive set of detergents commonly used for membrane protein studies are systematically investigated. Using small-angle X-ray scattering (SAXS), micelle shapes and sizes are determined for phosphocholines with 10, 12, and 14 alkyl carbons, glucosides with 8, 9, and 10 alkyl carbons, maltosides with 8, 10, and 12 alkyl carbons, and lysophosphatidyl glycerols with 14 and 16 alkyl carbons. The SAXS profiles are well described by two-component ellipsoid models, with an electron rich outer shell corresponding to the detergent head groups and a less electron dense hydrophobic core composed of the alkyl chains. The minor axis of the elliptical micelle core from these models is constrained by the length of the alkyl chain, and increases by 1.2-1.5 Å per carbon addition to the alkyl chain. The major elliptical axis also increases with chain length; however, the ellipticity remains approximately constant for each detergent series. In addition, the aggregation number of these detergents increases by ∼16 monomers per micelle for each alkyl carbon added. The data provide a comprehensive view of the determinants of micelle shape and size and provide a baseline for correlating micelle properties with protein-detergent interactions.

  18. Dependence of micelle size and shape on detergent alkyl chain length and head group.

    Directory of Open Access Journals (Sweden)

    Ryan C Oliver

    Full Text Available Micelle-forming detergents provide an amphipathic environment that can mimic lipid bilayers and are important tools for solubilizing membrane proteins for functional and structural investigations in vitro. However, the formation of a soluble protein-detergent complex (PDC currently relies on empirical screening of detergents, and a stable and functional PDC is often not obtained. To provide a foundation for systematic comparisons between the properties of the detergent micelle and the resulting PDC, a comprehensive set of detergents commonly used for membrane protein studies are systematically investigated. Using small-angle X-ray scattering (SAXS, micelle shapes and sizes are determined for phosphocholines with 10, 12, and 14 alkyl carbons, glucosides with 8, 9, and 10 alkyl carbons, maltosides with 8, 10, and 12 alkyl carbons, and lysophosphatidyl glycerols with 14 and 16 alkyl carbons. The SAXS profiles are well described by two-component ellipsoid models, with an electron rich outer shell corresponding to the detergent head groups and a less electron dense hydrophobic core composed of the alkyl chains. The minor axis of the elliptical micelle core from these models is constrained by the length of the alkyl chain, and increases by 1.2-1.5 Å per carbon addition to the alkyl chain. The major elliptical axis also increases with chain length; however, the ellipticity remains approximately constant for each detergent series. In addition, the aggregation number of these detergents increases by ∼16 monomers per micelle for each alkyl carbon added. The data provide a comprehensive view of the determinants of micelle shape and size and provide a baseline for correlating micelle properties with protein-detergent interactions.

  19. The Effect of Pelvic Tilt and Femoral Head Size on Hip Range-of-Motion to Impingement.

    Science.gov (United States)

    McCarthy, Thomas F; Nevelos, Jim; Elmallah, Randa K; Chughtai, Morad; Khlopas, Anton; Alipit, Vincent; Wagner, Timothy C; Mont, Michael A

    2017-11-01

    About 50%-70% of dislocators have cups placed within so-called "safe zones." It has been postulated that factors such as femoral head size and pelvic tilt, obliquity, or rotation may influence postoperative stability. Therefore, we assessed varying degrees of pelvic tilt and head sizes on the range of motion (ROM) to impingement. A hip simulator was used to import models of 10 subjects who performed object pickup, squatting, and low-chair rising. Parameters were set for pelvic tilt, stem version, and the specific motions as defined by the subjects. Femur-to-pelvis relative motions were determined for abduction/adduction, internal/external rotation, and flexion/extension. Varying tilt angles were tested. Thirty-two millimeter and 36-mm head with a standard cup and 42-mm dual mobility cup were tested. Cup orientations for abduction and anteversion combinations were chosen, and computations of minimum clearances or impingement between components were made. The ROM to impingement varied with the different pelvic tilts and femoral head sizes and with the different motions. The larger the head size, the larger the impingement-free ROM. Negative 10° of pelvic tilt led to the largest impingement-free zone, whereas 10° of forward tilt was associated with fewer impingement-free cup anteversion and abduction angle combinations. Variations in pelvic tilt had the greatest influence on object pickup and affected the impingement-free "safe zone." Targets for impingement-free motion may be smaller when considering varying pelvic tilts and femoral head sizes, particularly for certain activities, such as object pickup. These findings may indicate the need for more individualized patient planning. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Discrepancy between absorbed dose estimated from phantom measurements and from estimates using data on individual head sizes in head CT examinations.

    Science.gov (United States)

    Adliene, D; Mockeviciene, S

    2010-01-01

    Patient doses during computed tomography (CT) scanning are relative high, as compared with doses received by patients during conventional X-ray examinations. Owing to this, every possible optimisation of CT examinations is of importance. Dose estimation in CT examinations of patients are normally based on measurements of CT dose index and dose length products in standardised CT phantoms, representing a standard person of 70 kg. Real patients may differ significantly from this standard, and hence the dose values calculated for a phantom are not relevant for the individual patient. In this investigation, the effective dose for 31 patients undergoing a CT examination of their head has been evaluated using measurements on a standard CT head phantom and the data corrected for the real size (perimeter) and exposed volume of the patient's head. It is shown that the actual doses to patients were higher in 50 % cases of all performed head CT examinations, compared with doses estimated from phantom measurements. A dose calculation model for head CT patients based on the individual patient's head size (perimeter) and exposed head volume is proposed and the possibility to optimise head CT examinations of patients is discussed.

  1. Association of prenatal phenobarbital and phenytoin exposure with small head size at birth and with learning problems

    NARCIS (Netherlands)

    Dessens, A. B.; Cohen-Kettenis, P. T.; Mellenbergh, G. J.; Koppe, J. G.; van de Poll, N. E.; Boer, K.

    2000-01-01

    Small head size has been observed in prenatally anticonvulsant-exposed neonates. In infancy, cognitive impairments were revealed. It is presently unknown whether these impairments are permanent or disappear after puberty. We studied the link between the prenatal influence of anticonvulsants on brain

  2. Rhizosphere size

    Science.gov (United States)

    Kuzyakov, Yakov; Razavi, Bahar

    2017-04-01

    Estimation of the soil volume affected by roots - the rhizosphere - is crucial to assess the effects of plants on properties and processes in soils and dynamics of nutrients, water, microorganisms and soil organic matter. The challenges to assess the rhizosphere size are: 1) the continuum of properties between the root surface and root-free soil, 2) differences in the distributions of various properties (carbon, microorganisms and their activities, various nutrients, enzymes, etc.) along and across the roots, 3) temporal changes of properties and processes. Thus, to describe the rhizosphere size and root effects, a holistic approach is necessary. We collected literature and own data on the rhizosphere gradients of a broad range of physico-chemical and biological properties: pH, CO2, oxygen, redox potential, water uptake, various nutrients (C, N, P, K, Ca, Mg, Mn and Fe), organic compounds (glucose, carboxylic acids, amino acids), activities of enzymes of C, N, P and S cycles. The collected data were obtained based on the destructive approaches (thin layer slicing), rhizotron studies and in situ visualization techniques: optodes, zymography, sensitive gels, 14C and neutron imaging. The root effects were pronounced from less than 0.5 mm (nutrients with slow diffusion) up to more than 50 mm (for gases). However, the most common effects were between 1 - 10 mm. Sharp gradients (e.g. for P, carboxylic acids, enzyme activities) allowed to calculate clear rhizosphere boundaries and so, the soil volume affected by roots. The first analyses were done to assess the effects of soil texture and moisture as well as root system and age on these gradients. The most properties can be described by two curve types: exponential saturation and S curve, each with increasing and decreasing concentration profiles from the root surface. The gradient based distribution functions were calculated and used to extrapolate on the whole soil depending on the root density and rooting intensity. We

  3. Size-specific, scanner-independent organ dose estimates in contiguous axial and helical head CT examinations.

    Science.gov (United States)

    McMillan, Kyle; Bostani, Maryam; Cagnon, Chris; Zankl, Maria; Sepahdari, Ali R; McNitt-Gray, Michael

    2014-12-01

    AAPM Task Group 204 introduced size-specific dose estimates for pediatric and adult patients undergoing body CT examinations. This investigation extends that work to head CT exams by using Monte Carlo simulations to develop size-specific, scanner-independent CTDIvol-to-organ-dose conversion coefficients. Using eight patient models from the GSF family of voxelized phantoms, dose to the brain and lens of the eye was estimated using Monte Carlo simulations of contiguous axial and helical scans for 64-slice multidetector CT scanners from four major manufacturers. For each patient model and scan mode, scanner-independent CTDIvol-to-organ-dose conversion coefficients were calculated by normalizing organ dose by scanner-specific 16 cm CTDIvol values and averaging across all scanners. Head size was measured using both geometric and attenuation-based size metrics. Head perimeter and effective diameter (ED), both geometric size metrics, were measured directly from the GSF data at the first slice superior to the eyes. Because the GSF models' pixel data are provided in terms of organ identification numbers instead of CT numbers, an indirect estimate of water equivalent diameter (WED), an attenuation-based size metric, was determined based on the relationships between WED and both ED and perimeter for a sample of patient data. Correlations between CTDIvol-to-organ-dose conversion coefficients and the various patient size metrics were then explored. The analysis of the patient data revealed a best-fit linear relationship (R(2) of 0.87) between ED and WED across a wide variety of patient sizes. Using this relationship along with ED determined from the GSF data, WED was estimated for each GSF model. An exponential relationship between CTDIvol normalized organ dose and WED was observed for both contiguous axial and helical scanning. For head perimeter and ED measured directly from the GSF data, an exponential relationship between CTDIvol normalized organ dose and patient size was

  4. Normal radiological unossified hip joint space and femoral head size development during growth in 675 children and adolescents.

    Science.gov (United States)

    Wegener, Veronika; Jorysz, Gabriele; Arnoldi, Andreas; Utzschneider, Sandra; Wegener, Bernd; Jansson, Volkmar; Heimkes, Bernhard

    2017-03-01

    Evaluation of hip joint space width during child growth is important to aid in the early diagnosis of hip pathology in children. We established reference values for hip joint space and femoral head size for each age. Hip joint space development during growth was retrospectively investigated medial and cranial in 1350 hip joints of children using standard anteroposterior supine plain pelvic radiographs. Maximum capital femoral epiphysis diameter and femoral radii were further more investigated. Hip joint space values show a slow decline during growth. Joint space was statistically significantly (p < 0.006) larger in boys than girls. Our hip joint space measurements on supine subjects seem slightly larger than those reported by Hughes on standing subjects. Evaluation of the femoral head diameter and the radii showed a size curve quite parallel to the known body growth charts. Radii medial and perpendicular to the physis are not statistically significantly different. We recommend to compare measurements of hip joint space at two locations to age dependent charts using the same imaging technique. During growth, a divergence in femoral head size from the expected values or loss of the spherical shape should raise the question of hip disorder. Clin. Anat. 30:267-275, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  5. Effect of femoral head size and surgical approach on risk of revision for dislocation after total hip arthroplasty.

    Science.gov (United States)

    Zijlstra, Wierd P; De Hartog, Bas; Van Steenbergen, Liza N; Scheurs, B Willem; Nelissen, Rob G H H

    2017-08-01

    Background and purpose - Recurrent dislocation is the commonest cause of early revision of a total hip arthropasty (THA). We examined the effect of femoral head size and surgical approach on revision rate for dislocation, and for other reasons, after total hip arthroplasty (THA). Patients and methods - We analyzed data on 166,231 primary THAs and 3,754 subsequent revision THAs performed between 2007 and 2015, registered in the Dutch Arthroplasty Register (LROI). Revision rate for dislocation, and for all other causes, were calculated by competing-risk analysis at 6-year follow-up. Multivariable Cox proportional hazard regression ratios (HRs) were used for comparisons. Results - Posterolateral approach was associated with higher dislocation revision risk (HR =1) than straight lateral, anterolateral, and anterior approaches (HR =0.5-0.6). However, the risk of revision for all other reasons (especially stem loosening) was higher with anterior and anterolateral approaches (HR =1.2) and lowest with posterolateral approach (HR =1). For all approaches, 32-mm heads reduced the risk of revision for dislocation compared to 22- to 28-mm heads (HR =1 and 1.6, respectively), while the risk of revision for other causes remained unchanged. 36-mm heads increasingly reduced the risk of revision for dislocation but only with the posterolateral approach (HR =0.6), while the risk of revision for other reasons was unchanged. With the anterior approach, 36-mm heads increased the risk of revision for other reasons (HR =1.5). Interpretation - Compared to the posterolateral approach, direct anterior and anterolateral approaches reduce the risk of revision for dislocation, but at the cost of more stem revisions and other revisions. For all approaches, there is benefit in using 32-mm heads instead of 22- to 28-mm heads. For the posterolateral approach, 36-mm heads can safely further reduce the risk of revision for dislocation.

  6. The neural code for auditory space depends on sound frequency and head size in an optimal manner.

    Directory of Open Access Journals (Sweden)

    Nicol S Harper

    Full Text Available A major cue to the location of a sound source is the interaural time difference (ITD-the difference in sound arrival time at the two ears. The neural representation of this auditory cue is unresolved. The classic model of ITD coding, dominant for a half-century, posits that the distribution of best ITDs (the ITD evoking a neuron's maximal response is unimodal and largely within the range of ITDs permitted by head-size. This is often interpreted as a place code for source location. An alternative model, based on neurophysiology in small mammals, posits a bimodal distribution of best ITDs with exquisite sensitivity to ITDs generated by means of relative firing rates between the distributions. Recently, an optimal-coding model was proposed, unifying the disparate features of these two models under the framework of efficient coding by neural populations. The optimal-coding model predicts that distributions of best ITDs depend on head size and sound frequency: for high frequencies and large heads it resembles the classic model, for low frequencies and small head sizes it resembles the bimodal model. The optimal-coding model makes key, yet unobserved, predictions: for many species, including humans, both forms of neural representation are employed, depending on sound frequency. Furthermore, novel representations are predicted for intermediate frequencies. Here, we examine these predictions in neurophysiological data from five mammalian species: macaque, guinea pig, cat, gerbil and kangaroo rat. We present the first evidence supporting these untested predictions, and demonstrate that different representations appear to be employed at different sound frequencies in the same species.

  7. A fully automated calculation of size-specific dose estimates (SSDE) in thoracic and head CT examinations

    Science.gov (United States)

    Anam, C.; Haryanto, F.; Widita, R.; Arif, I.; Dougherty, G.

    2016-03-01

    The purpose of this study is to automatically calculate and then investigate the size- specific dose estimate (SSDE) in thoracic and head CT examinations undertaken using standard imaging protocols. The effective diameter (Deff ), the water equivalent diameter (Dw ), and the SSDE were calculated automatically from patient images. We investigated sixteen adult patients who underwent a CT head examination and thirty adult patients who underwent a CT thorax examination. Our results showed that the Dw value in the thoracic region was 4.5% lower than the value of Deff , while the Dw value in the head region was 8.6% higher than the value of Deff . The relationships between diameter (Deff and Dw ) and CTDIvol were distinctive. In the head region, decreasing the patient diameter resulted in a constant CTDIvol due to the tube current modulation (TCM) being off, while in the thoracic region decreasing the patient diameter resulted in a decrease in value of CTDIvol due to TCM being on. In the head region, decreasing the patient diameter resulted in an increase in the value of SSDE, while in the thoracic region decreasing the patient diameter resulted in a decrease in the value of SSDE.

  8. Validation of the contralateral side as reference for selecting radial head implant sizes

    NARCIS (Netherlands)

    ten Berg, Paul W. L.; Dobbe, Johannes G. G.; van Wolfswinkel, Gerhard; Strackee, Simon D.; Streekstra, Geert J.

    2016-01-01

    In arthroplasty of comminuted radial head fractures, the contralateral radial head diameter can be used as reference for implant selection. However, potential bilateral asymmetry may result in a mismatch of the implant with the native bone. Therefore, our purpose was to evaluate anatomical

  9. Reproductive ecology of phorid parasitoids in relation to the head size of leaf-cutting ants Atta sexdens Forel.

    Science.gov (United States)

    Farder-Gomes, C F; Oliveira, M A; Gonçalves, P L; Gontijo, L M; Zanuncio, J C; Bragança, M A L; Pires, E M

    2017-08-01

    The leaf-cutting ant Atta sexdens Forel (Hymenoptera: Formicidae) is one of the most damaging agricultural pests in the Neotropics. Management strategies predominantly rely on the use of general insecticides. What is needed are more species-specific and environmentally friendly options. Parasitioids such as phorid flies (Diptera: Phoridae) may be one such option, but a greater understanding of the ecology of the flies and their ant hosts is essential to devise biological control strategies. Here we report parasitism rates, ant host size, parasitoid abundance per host and resultant sex ratios of two phorid species Apocephalus attophilus Borgmeier and Eibesfeldtphora tonhascai Brown parasitizing A.sexdens. The two species achieved parasitism rates of 1.48 and 1.46%, respectively and the pupal period was 14.7 ± 1.1 days and 22.1 ± 2.8 days, respectively. There was no significant difference between the head capsule width of ants parasitized by either A. attophilus or E. tonhascai. Likewise, there was no significant effect between the head capsule width of parasitized and unparasitized ants for both species. A significant positive correlation was found between the head capsule width of the parasitized ants and the number of adult parasitoids A. attophilus emerged. Ants parasitized by E. tonhascai survived significantly longer than those parasitized by A. attophilus. There was no significant effect of ant head width on the sex ratio of the offspring of either parasitoid species and no significant difference in the sex ratio (male: female) of their offspring. In summary, these data addressed here are important steps when considering natural enemies for biological control. Studying survival of the parasitized ants, parasitoid offspring sex ratio and host size preference allows for a better understanding of ant natural biological control in the field and can help in rearing of A. attophilus and E. tonhascai in laboratory.

  10. MO-E-17A-08: Attenuation-Based Size Adjusted, Scanner-Independent Organ Dose Estimates for Head CT Exams: TG 204 for Head CT

    Energy Technology Data Exchange (ETDEWEB)

    McMillan, K; Bostani, M; Cagnon, C; McNitt-Gray, M [UCLA School of Medicine, Los Angeles, CA (United States); Zankl, M [Helmholtz Zentrum Munchen GmbH, Neuherberg (Germany); DeMarco, J [UCLA Department of Radiation Oncology, Los Angeles, CA (United States)

    2014-06-15

    Purpose: AAPM Task Group 204 described size specific dose estimates (SSDE) for body scans. The purpose of this work is to use a similar approach to develop patient-specific, scanner-independent organ dose estimates for head CT exams using an attenuation-based size metric. Methods: For eight patient models from the GSF family of voxelized phantoms, dose to brain and lens of the eye was estimated using Monte Carlo simulations of contiguous axial scans for 64-slice MDCT scanners from four major manufacturers. Organ doses were normalized by scannerspecific 16 cm CTDIvol values and averaged across all scanners to obtain scanner-independent CTDIvol-to-organ-dose conversion coefficients for each patient model. Head size was measured at the first slice superior to the eyes; patient perimeter and effective diameter (ED) were measured directly from the GSF data. Because the GSF models use organ identification codes instead of Hounsfield units, water equivalent diameter (WED) was estimated indirectly. Using the image data from 42 patients ranging from 2 weeks old to adult, the perimeter, ED and WED size metrics were obtained and correlations between each metric were established. Applying these correlations to the GSF perimeter and ED measurements, WED was calculated for each model. The relationship between the various patient size metrics and CTDIvol-to-organ-dose conversion coefficients was then described. Results: The analysis of patient images demonstrated the correlation between WED and ED across a wide range of patient sizes. When applied to the GSF patient models, an exponential relationship between CTDIvol-to-organ-dose conversion coefficients and the WED size metric was observed with correlation coefficients of 0.93 and 0.77 for the brain and lens of the eye, respectively. Conclusion: Strong correlation exists between CTDIvol normalized brain dose and WED. For the lens of the eye, a lower correlation is observed, primarily due to surface dose variations. Funding

  11. MO-E-17A-08: Attenuation-Based Size Adjusted, Scanner-Independent Organ Dose Estimates for Head CT Exams: TG 204 for Head CT

    International Nuclear Information System (INIS)

    McMillan, K; Bostani, M; Cagnon, C; McNitt-Gray, M; Zankl, M; DeMarco, J

    2014-01-01

    Purpose: AAPM Task Group 204 described size specific dose estimates (SSDE) for body scans. The purpose of this work is to use a similar approach to develop patient-specific, scanner-independent organ dose estimates for head CT exams using an attenuation-based size metric. Methods: For eight patient models from the GSF family of voxelized phantoms, dose to brain and lens of the eye was estimated using Monte Carlo simulations of contiguous axial scans for 64-slice MDCT scanners from four major manufacturers. Organ doses were normalized by scannerspecific 16 cm CTDIvol values and averaged across all scanners to obtain scanner-independent CTDIvol-to-organ-dose conversion coefficients for each patient model. Head size was measured at the first slice superior to the eyes; patient perimeter and effective diameter (ED) were measured directly from the GSF data. Because the GSF models use organ identification codes instead of Hounsfield units, water equivalent diameter (WED) was estimated indirectly. Using the image data from 42 patients ranging from 2 weeks old to adult, the perimeter, ED and WED size metrics were obtained and correlations between each metric were established. Applying these correlations to the GSF perimeter and ED measurements, WED was calculated for each model. The relationship between the various patient size metrics and CTDIvol-to-organ-dose conversion coefficients was then described. Results: The analysis of patient images demonstrated the correlation between WED and ED across a wide range of patient sizes. When applied to the GSF patient models, an exponential relationship between CTDIvol-to-organ-dose conversion coefficients and the WED size metric was observed with correlation coefficients of 0.93 and 0.77 for the brain and lens of the eye, respectively. Conclusion: Strong correlation exists between CTDIvol normalized brain dose and WED. For the lens of the eye, a lower correlation is observed, primarily due to surface dose variations. Funding

  12. Covariation between human pelvis shape, stature, and head size alleviates the obstetric dilemma.

    Science.gov (United States)

    Fischer, Barbara; Mitteroecker, Philipp

    2015-05-05

    Compared with other primates, childbirth is remarkably difficult in humans because the head of a human neonate is large relative to the birth-relevant dimensions of the maternal pelvis. It seems puzzling that females have not evolved wider pelvises despite the high maternal mortality and morbidity risk connected to childbirth. Despite this seeming lack of change in average pelvic morphology, we show that humans have evolved a complex link between pelvis shape, stature, and head circumference that was not recognized before. The identified covariance patterns contribute to ameliorate the "obstetric dilemma." Females with a large head, who are likely to give birth to neonates with a large head, possess birth canals that are shaped to better accommodate large-headed neonates. Short females with an increased risk of cephalopelvic mismatch possess a rounder inlet, which is beneficial for obstetrics. We suggest that these covariances have evolved by the strong correlational selection resulting from childbirth. Although males are not subject to obstetric selection, they also show part of these association patterns, indicating a genetic-developmental origin of integration.

  13. Intron size and genome size in plants.

    Science.gov (United States)

    J. Wendel; R. Cronn; I. Alvarez; B. Liu; R. Small; D. Senchina

    2002-01-01

    It has long been known that genomes vary over a remarkable range of sizes in both plants (Bennett, Cox, and Leitch 1997) and animals (Gregory 2001). It also has become evident that across the broad phylogenetic sweep, genome size may be correlated with intron size (Deutsch and Long 1999; Vinogradov 1999; McLysaght et al. 2000), suggesting that some component of genome...

  14. Association of prenatal phenobarbital and phenytoin exposure with small head size at birth and with learning problems.

    Science.gov (United States)

    Dessens, A B; Cohen-Kettenis, P T; Mellenbergh, G J; Koppe, J G; van De Poll, N E; Boer, K

    2000-05-01

    Small head size has been observed in prenatally anticonvulsant-exposed neonates. In infancy, cognitive impairments were revealed. It is presently unknown whether these impairments are permanent or disappear after puberty. We studied the link between the prenatal influence of anticonvulsants on brain development and cognitive functioning in adulthood: a retrospective study on head size and a follow-up assessing cognitive capacities among adults who had been included in the retrospective study. The retrospective study comprised 172 exposed and 168 control neonates, matched with respect to age, sex and their mothers' age. Prenatally phenobarbital + phenytoin-exposed neonates had a significantly smaller occipitofrontal circumference (OFC) than prenatally phenobarbital-monotherapy-exposed and control neonates (mean difference of 0.7 cm). In the follow-up, no difference in cognitive functioning was found between the exposed and the control groups. Most of the prenatally anticonvulsant-exposed subjects had normal intellectual capacity. However, 12% of the exposed subjects versus 1% of the controls had persistent learning problems. In addition, more of the exposed subjects were mentally retarded. There was no clear relationship between learning problems and small OFC, maternal epilepsy or unfavourable family climate. We conclude that the combination of phenobarbital + phenytoin affects the fetal OFC. The smaller OFC does not seem to be related to cognitive functioning in adulthood, but learning problems and mental retardation proved to be more prevalent among exposed subjects. Phenobarbital and phenytoin may therefore affect cognitive capacity but only in infants who are susceptible to this particular influence of the drugs.

  15. Association of Fetal Abdominal–Head Circumference Size Difference With Shoulder Dystocia: A Multicenter Study

    Science.gov (United States)

    Endres, Loraine; DeFranco, Emily; Conyac, Theresa; Adams, Marci; Zhou, Ying; Magner, Kristin; O'Rourke, Luke; Bernhard, Kiley A.; Siddiqui, Danish; McCormick, Anna; Abramowicz, Jacques; Merkel, Ronald; Jawish, Rana; Habli, Mounira; Floman, Alissa; Magann, Everett F.; Chauhan, Suneet P.

    2015-01-01

    Objective This study aims to determine if shoulder dystocia is associated with a difference in the fetal abdominal (AC) to head circumference (HC) of 50 mm or more noted on antenatal ultrasound. Study Design A multicenter matched case–control study was performed comparing women who had shoulder dystocia to controls who did not. Women with vaginal births of live born nonanomalous singletons ≥ 36 weeks of gestation with an antenatal ultrasound within 4 weeks of delivery were included. Controls were matched for gestational age, route of delivery, and diabetes status. Results We identified 181 matched pairs. Only 5% of the fetuses had an AC to HC of ≥ 50 mm. The proportion of AC to HC difference of ≥ 50 mm was significantly higher in shoulder dystocia cases (8%) than controls (1%, p = 0.002). With multivariate regression, the three significant factors associated with shoulder dystocia were AC to HC ≥ 50 mm (odds ratio [OR], 7.3; confidence interval [CI], 1.6–33.3; p = 0.010), femur length (OR, 1.1; CI, 1.0–1.2; p = 0.002), and induced labor (OR, 1.8; CI, 1.1–3.1; p = 0.027). Conclusion A prenatal ultrasound finding of a difference in AC to HC of ≥ 50 mm while uncommon is associated with shoulder dystocia. PMID:26495163

  16. Association of Fetal Abdominal–Head Circumference Size Difference With Shoulder Dystocia: A Multicenter Study

    Directory of Open Access Journals (Sweden)

    Loraine Endres

    2015-10-01

    Full Text Available Objective - This study aims to determine if shoulder dystocia is associated with a difference in the fetal abdominal (AC to head circumference (HC of 50 mm or more noted on antenatal ultrasound. Study Design - A multicenter matched case–control study was performed comparing women who had shoulder dystocia to controls who did not. Women with vaginal births of live born nonanomalous singletons ≥ 36 weeks of gestation with an antenatal ultrasound within 4 weeks of delivery were included. Controls were matched for gestational age, route of delivery, and diabetes status. Results - We identified 181 matched pairs. Only 5% of the fetuses had an AC to HC of ≥ 50 mm. The proportion of AC to HC difference of ≥ 50 mm was significantly higher in shoulder dystocia cases (8% than controls (1%, p = 0.002. With multivariate regression, the three significant factors associated with shoulder dystocia were AC to HC ≥ 50 mm (odds ratio [OR], 7.3; confidence interval [CI], 1.6–33.3; p = 0.010, femur length (OR, 1.1; CI, 1.0–1.2; p = 0.002, and induced labor (OR, 1.8; CI, 1.1–3.1; p = 0.027. Conclusion - A prenatal ultrasound finding of a difference in AC to HC of ≥ 50 mm while uncommon is associated with shoulder dystocia.

  17. On Effect Size

    Science.gov (United States)

    Kelley, Ken; Preacher, Kristopher J.

    2012-01-01

    The call for researchers to report and interpret effect sizes and their corresponding confidence intervals has never been stronger. However, there is confusion in the literature on the definition of effect size, and consequently the term is used inconsistently. We propose a definition for effect size, discuss 3 facets of effect size (dimension,…

  18. Ontogenetic prey size selection in snakes: predator size and functional limitations to handling minimum prey sizes.

    Science.gov (United States)

    Hampton, Paul M

    2018-02-01

    As body size increases, some predators eliminate small prey from their diet exhibiting an ontogenetic shift toward larger prey. In contrast, some predators show a telescoping pattern of prey size in which both large and small prey are consumed with increasing predator size. To explore a functional explanation for the two feeding patterns, I examined feeding effort as both handling time and number of upper jaw movements during ingestion of fish of consistent size. I used a range of body sizes from two snake species that exhibit ontogenetic shifts in prey size (Nerodia fasciata and N. rhombifer) and a species that exhibits telescoping prey size with increased body size (Thamnophis proximus). For the two Nerodia species, individuals with small or large heads exhibited greater difficulty in feeding effort compared to snakes of intermediate size. However, for T. proximus measures of feeding effort were negatively correlated with head length and snout-vent length (SVL). These data indicate that ontogenetic shifters of prey size develop trophic morphology large enough that feeding effort increases for disproportionately small prey. I also compared changes in body size among the two diet strategies for active foraging snake species using data gleaned from the literature to determine if increased change in body size and thereby feeding morphology is observable in snakes regardless of prey type or foraging habitat. Of the 30 species sampled from literature, snakes that exhibit ontogenetic shifts in prey size have a greater magnitude of change in SVL than species that have telescoping prey size patterns. Based upon the results of the two data sets above, I conclude that ontogenetic shifts away from small prey occur in snakes due, in part, to growth of body size and feeding structures beyond what is efficient for handling small prey. Copyright © 2017. Published by Elsevier GmbH.

  19. Geochemical, Sulfur Isotopic Characteristics and Source Contributions of Size-Aggregated Aerosols Collected in Baring Head, New Zealand.

    Science.gov (United States)

    Li, J.; Michalski, G. M.; Davy, P.; Harvey, M.; Wilkins, B. P.; Katzman, T. L.

    2017-12-01

    Sulfate aerosols are critical to the climate, human health, and the hydrological cycle in the atmosphere, yet the sources of sulfate in aerosols are not completely understood. In this work, we evaluated the sources of sulfate in size-aggregated aerosols from the Southern Pacific Ocean and the land of New Zealand using geochemical and isotopic analyses. Aerosols were collected at Baring Head, New Zealand between 6/30/15 to 8/4/16 using two collectors, one only collects Southern Pacific Ocean derived aerosols (open-ocean collector), the other collects aerosols from both the ocean and the land (all-direction collector). Each collector is equipped with two filters to sample size-aggregated aerosols (fine aerosols: DMS flux. The sources of sulfur in NSS-SO42- could be further determined by their d34S values. DMS emission is likely the sole sulfur source in the open-ocean collector as it shows constant DMS-like d34S signatures (15-18‰) throughout the year. Meanwhile, the d34S of NSS-SO42- in the all-direction collector display a seasonal trend: summer time d34S values are higher and DMS-like (15-18‰), indicating DMS emission is the dominant sulfur source; winter time d34S values are lower ( 6-12‰), therefore the sulfur is likely sourced from both DMS emission and terrestrial S input with low d34S values, such as volcanic activities, fossil fuel and wood burning.

  20. Boys who pee the farthest have a large hollow head, a thin skin, and medium-size manhood

    Science.gov (United States)

    Attinger, Daniel; Lee, Vincent

    2016-11-01

    Following a recent trend of scientific studies on artwork, we study here the thermodynamics of a jetting thermometer made of ceramic, related to the Chinese tea culture. The thermometer represents a boy who "urinates" shortly after hot water is poured onto his head. Long jetting distance indicates if the water temperature is hot enough to brew tea. Here, a thermofluid model describes the jetting phenomenon of that pee-pee boy. The study demonstrates how thermal expansion of an interior air pocket causes jetting. The validity of assumptions underlying the Hagen-Poiseuille flow is discussed for urethra of finite length. A thermodynamic potential is shown to define maximum jetting velocity. Seven optimization criteria to maximize jetting distance are provided, including two dimensionless numbers. The dimensionless numbers are obtained by comparing the time scales of the internal pressure buildup due to heating, with that of pressure relief due to jetting. Optimization results show that longer jets are produced by large individuals, with low body mass index, with a boyhood of medium size inclined at an angle π/4. Analogies are drawn with pissing contests among humans and lobsters. The study ends by noting similitudes of working principle between that politically incorrect thermometer and Galileo Galilei's thermoscope.

  1. Size and Political Participation

    DEFF Research Database (Denmark)

    Lassen, David Dreyer; Serritzlew, Søren

    This paper uses a novel research design to re-examine the causal effect of jurisdiction size on political participation. Two waves of municipal consolidation in Denmark, in 1970 and in 2005, provide exogenous variation in jurisdiction size.......This paper uses a novel research design to re-examine the causal effect of jurisdiction size on political participation. Two waves of municipal consolidation in Denmark, in 1970 and in 2005, provide exogenous variation in jurisdiction size....

  2. Size reduction machine

    International Nuclear Information System (INIS)

    Fricke, V.

    1999-01-01

    The Size Reduction Machine (SRM) is a mobile platform capable of shearing various shapes and types of metal components at a variety of elevations. This shearing activity can be performed without direct physical movement and placement of the shear head by the operator. The base unit is manually moved and roughly aligned to each cut location. The base contains the electronics: hydraulic pumps, servos, and actuators needed to move the shear-positioning arm. The movable arm allows the shear head to have six axes of movement and to cut to within 4 inches of a wall surface. The unit has a slick electrostatic capture coating to assist in external decontamination. Internal contamination of the unit is controlled by a high-efficiency particulate air (HEPA) filter on the cooling inlet fan. The unit is compact enough to access areas through a 36-inch standard door opening. This paper is an Innovative Technology Summary Report designed to provide potential users with the information they need to quickly determine if a technology would apply to a particular environmental management problem. They also are designed for readers who may recommend that a technology be considered by prospective users

  3. Bra sizing and fit

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2007-01-01

    It is often reported that 70% or more of the women wear the wrong-sized bra. A fact is that many women complain about bra fit even though the number of available sizes varies from 20 to 100. Sizing of bras is based on under bust circumference and its difference with circumference over the bust (cup

  4. Bra sizing and fit

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2008-01-01

    It is often reported that 70% or more of the women wear the wrong-sized bra. A fact is that many women complain about bra fit even though the number of available sizes varies from 20 to 100. Sizing of bras is based on under bust circumference and its difference with circumference over the bust (cup

  5. Reciprocal Relationship between Head Size, an Autism Endophenotype, and Gene Dosage at 19p13.12 Points to AKAP8 and AKAP8L.

    Directory of Open Access Journals (Sweden)

    Rebecca A Nebel

    Full Text Available Microcephaly and macrocephaly are overrepresented in individuals with autism and are thought to be disease-related risk factors or endophenotypes. Analysis of DNA microarray results from a family with a low functioning autistic child determined that the proband and two additional unaffected family members who carry a rare inherited 760 kb duplication of unknown clinical significance at 19p13.12 are macrocephalic. Consideration alongside overlapping deletion and duplication events in the literature provides support for a strong relationship between gene dosage at this locus and head size, with losses and gains associated with microcephaly (p=1.11x10(-11 and macrocephaly (p=2.47x10(-11, respectively. Data support A kinase anchor protein 8 and 8-like (AKAP8 and AKAP8L as candidate genes involved in regulation of head growth, an interesting finding given previous work implicating the AKAP gene family in autism. Towards determination of which of AKAP8 and AKAP8L may be involved in the modulation of head size and risk for disease, we analyzed exome sequencing data for 693 autism families (2591 individuals where head circumference data were available. No predicted loss of function variants were observed, precluding insights into relationship to head size, but highlighting strong evolutionary conservation. Taken together, findings support the idea that gene dosage at 19p13.12, and AKAP8 and/or AKAP8L in particular, play an important role in modulation of head size and may contribute to autism risk. Exome sequencing of the family also identified a rare inherited variant predicted to disrupt splicing of TPTE / PTEN2, a PTEN homologue, which may likewise contribute to both macrocephaly and autism risk.

  6. Phylogenetic effective sample size.

    Science.gov (United States)

    Bartoszek, Krzysztof

    2016-10-21

    In this paper I address the question-how large is a phylogenetic sample? I propose a definition of a phylogenetic effective sample size for Brownian motion and Ornstein-Uhlenbeck processes-the regression effective sample size. I discuss how mutual information can be used to define an effective sample size in the non-normal process case and compare these two definitions to an already present concept of effective sample size (the mean effective sample size). Through a simulation study I find that the AICc is robust if one corrects for the number of species or effective number of species. Lastly I discuss how the concept of the phylogenetic effective sample size can be useful for biodiversity quantification, identification of interesting clades and deciding on the importance of phylogenetic correlations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Size makes a difference

    DEFF Research Database (Denmark)

    Matthiessen, Jeppe; Fagt, Sisse; Biltoft-Jensen, Anja Pia

    2003-01-01

    items was obtained from a 4-day weighed food record (Study 1). Trends in portion sizes of commercial foods were examined by gathering information from major food manufacturers and fast food chains (Study 2). Data on intakes and sales of sugar-sweetened soft drinks and confectionery were obtained through...... content. As a result, almost the same amounts of energy and fat were consumed both ways, with the exception of sliced cold meat (energy and fat) and milk (fat). Study 2: Portion sizes of commercial energy-dense foods and beverages, and fast food meals rich in fat and/or added sugars, seem to have......Objective: To elucidate status and trends in portion size of foods rich in fat and/or added sugars during the past decades, and to bring portion size into perspective in its role in obesity and dietary guidelines in Denmark. Data sources: Information about portion sizes of low-fat and full-fat food...

  8. The development of a methodology to determine the relationship in grip size and pressure to racket head speed in a tennis forehand stroke

    DEFF Research Database (Denmark)

    Christensen, Jonas; Rasmussen, John; Halkon, Ben

    2016-01-01

    and kinematic contribution of the body segments in the upper trunk translational and angular velocities. Two Babolat Pure Storm GT rackets, with grip sizes 2 and 4 respectively, were used with Tekscan 9811E pressure sensors applied to the handles to examine pressure distribution during the stroke. Upper body......This study developed a methodology to examine the effects of grip size and grip firmness on the kinematic contribution of angular velocity (KCAV) to the generation of racket head speed during a topspin tennis forehand. The KCAV is subdivided into kinematic contribution of joint angular velocity...... in a significant (p2 compared to grip size 4. A trend in negative linear relationships was found between upper trunk and shoulder joint in KCAV across conditions. Using the smaller grip also led to a trend in negative linear relationship between shoulder...

  9. Sample size methodology

    CERN Document Server

    Desu, M M

    2012-01-01

    One of the most important problems in designing an experiment or a survey is sample size determination and this book presents the currently available methodology. It includes both random sampling from standard probability distributions and from finite populations. Also discussed is sample size determination for estimating parameters in a Bayesian setting by considering the posterior distribution of the parameter and specifying the necessary requirements. The determination of the sample size is considered for ranking and selection problems as well as for the design of clinical trials. Appropria

  10. Compressors selection and sizing

    CERN Document Server

    Brown, Royce N

    2005-01-01

    This practical reference provides in-depth information required to understand and properly estimate compressor capabilities and to select the proper designs. Engineers and students will gain a thorough understanding of compression principles, equipment, applications, selection, sizing, installation, and maintenance. The many examples clearly illustrate key aspects to help readers understand the ""real world"" of compressor technology.Compressors: Selection and Sizing, third edition is completely updated with new API standards. Additions requested by readers include a new section on di

  11. Evaluation of dose-volume metrics for microbeam radiation therapy dose distributions in head phantoms of various sizes using Monte Carlo simulations

    Science.gov (United States)

    Anderson, Danielle; Siegbahn, E. Albert; Fallone, B. Gino; Serduc, Raphael; Warkentin, Brad

    2012-05-01

    This work evaluates four dose-volume metrics applied to microbeam radiation therapy (MRT) using simulated dosimetric data as input. We seek to improve upon the most frequently used MRT metric, the peak-to-valley dose ratio (PVDR), by analyzing MRT dose distributions from a more volumetric perspective. Monte Carlo simulations were used to calculate dose distributions in three cubic head phantoms: a 2 cm mouse head, an 8 cm cat head and a 16 cm dog head. The dose distribution was calculated for a 4 × 4 mm2 microbeam array in each phantom, as well as a 16 × 16 mm2 array in the 8 cm cat head, and a 32 × 32 mm2 array in the 16 cm dog head. Microbeam widths of 25, 50 and 75 µm and center-to-center spacings of 100, 200 and 400 µm were considered. The metrics calculated for each simulation were the conventional PVDR, the peak-to-mean valley dose ratio (PMVDR), the mean dose and the percentage volume below a threshold dose. The PVDR ranged between 3 and 230 for the 2 cm mouse phantom, and between 2 and 186 for the 16 cm dog phantom depending on geometry. The corresponding ranges for the PMVDR were much smaller, being 2-49 (mouse) and 2-46 (dog), and showed a slightly weaker dependence on phantom size and array size. The ratio of the PMVDR to the PVDR varied from 0.21 to 0.79 for the different collimation configurations, indicating a difference between the geometric dependence on outcome that would be predicted by these two metrics. For unidirectional irradiation, the mean lesion dose was 102%, 79% and 42% of the mean skin dose for the 2 cm mouse, 8 cm cat and 16 cm dog head phantoms, respectively. However, the mean lesion dose recovered to 83% of the mean skin dose in the 16 cm dog phantom in intersecting cross-firing regions. The percentage volume below a 10% dose threshold was highly dependent on geometry, with ranges for the different collimation configurations of 2-87% and 33-96% for the 2 cm mouse and 16 cm dog heads, respectively. The results of this study

  12. Evaluation of dose-volume metrics for microbeam radiation therapy dose distributions in head phantoms of various sizes using Monte Carlo simulations

    International Nuclear Information System (INIS)

    Anderson, Danielle; Fallone, B Gino; Warkentin, Brad; Siegbahn, E Albert; Serduc, Raphael

    2012-01-01

    This work evaluates four dose-volume metrics applied to microbeam radiation therapy (MRT) using simulated dosimetric data as input. We seek to improve upon the most frequently used MRT metric, the peak-to-valley dose ratio (PVDR), by analyzing MRT dose distributions from a more volumetric perspective. Monte Carlo simulations were used to calculate dose distributions in three cubic head phantoms: a 2 cm mouse head, an 8 cm cat head and a 16 cm dog head. The dose distribution was calculated for a 4 × 4 mm 2 microbeam array in each phantom, as well as a 16 × 16 mm 2 array in the 8 cm cat head, and a 32 × 32 mm 2 array in the 16 cm dog head. Microbeam widths of 25, 50 and 75 µm and center-to-center spacings of 100, 200 and 400 µm were considered. The metrics calculated for each simulation were the conventional PVDR, the peak-to-mean valley dose ratio (PMVDR), the mean dose and the percentage volume below a threshold dose. The PVDR ranged between 3 and 230 for the 2 cm mouse phantom, and between 2 and 186 for the 16 cm dog phantom depending on geometry. The corresponding ranges for the PMVDR were much smaller, being 2–49 (mouse) and 2–46 (dog), and showed a slightly weaker dependence on phantom size and array size. The ratio of the PMVDR to the PVDR varied from 0.21 to 0.79 for the different collimation configurations, indicating a difference between the geometric dependence on outcome that would be predicted by these two metrics. For unidirectional irradiation, the mean lesion dose was 102%, 79% and 42% of the mean skin dose for the 2 cm mouse, 8 cm cat and 16 cm dog head phantoms, respectively. However, the mean lesion dose recovered to 83% of the mean skin dose in the 16 cm dog phantom in intersecting cross-firing regions. The percentage volume below a 10% dose threshold was highly dependent on geometry, with ranges for the different collimation configurations of 2–87% and 33–96% for the 2 cm mouse and 16 cm dog heads, respectively. The results of this

  13. Ricinus communis agglutinin-mediated agglutination and fusion of glycolipid-containing phospholipid vesicles: effect of carbohydrate head group size, calcium ions, and spermine.

    Science.gov (United States)

    Hoekstra, D; Düzgüneş, N

    1986-03-25

    The glycolipids galactosylcerebroside (GalCer), lactosylceramide (LacCer), and trihexosylceramide (Gb3) were inserted into phospholipid vesicles, consisting of phosphatidylethanolamine and phosphatidic acid. The extent to which their carbohydrate head groups protruded beyond the vesicle surface and their interference with membrane approach were examined by determining vesicle susceptibility toward type I Ricinus communis agglutinin (RCA1) induced agglutination and Ca2+- and spermine-induced aggregation and fusion either in the presence or in the absence of the lectin. The initial agglutination rates increased in the order GalCer much less than LacCer less than Gb3, while a reversed order was obtained for Ca2+- and spermine-induced aggregation and fusion, indicating an enhanced steric interference on close approach of bilayers with increasing head group size. The lectin-mediated agglutination rates for LacCer- and Gb3-containing vesicles increased by an order of magnitude when Ca2+ was also included in the medium, at a concentration that did not induce aggregation per se. Charge neutralization could not account for this observation as the polyvalent cation spermine did not display this synergistic effect with RCA1. Addition of Ca2+ to preagglutinated vesicles substantially reduced the threshold cation concentration for fusion (micromolar vs. millimolar). Quantitatively, this concentration decreased with decreasing carbohydrate head group size, indicating that the head group protrusion determined the interbilayer distance within the vesicle aggregate. The distinct behavior of Ca2+ vs. spermine on RCA1-induced agglutination on the one hand and fusion on the other indicated that Ca2+ regulates the steric orientation of the carbohydrate head group, which appears to be related to its ability to dehydrate the bilayer. As a result, lectin agglutinability becomes enhanced while fusion will be interrupted as the interbilayer distance increases, the threshold head group size

  14. Fluctuations in email size

    Science.gov (United States)

    Matsubara, Yoshitsugu; Musashi, Yasuo

    2017-12-01

    The purpose of this study is to explain fluctuations in email size. We have previously investigated the long-term correlations between email send requests and data flow in the system log of the primary staff email server at a university campus, finding that email size frequency follows a power-law distribution with two inflection points, and that the power-law property weakens the correlation of the data flow. However, the mechanism underlying this fluctuation is not completely understood. We collected new log data from both staff and students over six academic years and analyzed the frequency distribution thereof, focusing on the type of content contained in the emails. Furthermore, we obtained permission to collect "Content-Type" log data from the email headers. We therefore collected the staff log data from May 1, 2015 to July 31, 2015, creating two subdistributions. In this paper, we propose a model to explain these subdistributions, which follow log-normal-like distributions. In the log-normal-like model, email senders -consciously or unconsciously- regulate the size of new email sentences according to a normal distribution. The fitting of the model is acceptable for these subdistributions, and the model demonstrates power-law properties for large email sizes. An analysis of the length of new email sentences would be required for further discussion of our model; however, to protect user privacy at the participating organization, we left this analysis for future work. This study provides new knowledge on the properties of email sizes, and our model is expected to contribute to the decision on whether to establish upper size limits in the design of email services.

  15. Size of the iceberg

    DEFF Research Database (Denmark)

    Nielsen, Søren Saxmose; Toft, Nils; Okura, Hisako

    2012-01-01

    of detectable infections among all infected is often referred to as ‘the tip of the iceberg’. For MAP infections, infected cattle may be divided into those with cell-mediated immune reactions (CMI) during latent infection, and those with humoral immune reactions (HI) characterized by IgG1 antibodies.......e. a significant shift in the size of the iceberg. Although the ‘iceberg’ concept is well-known among paratuberculosis researchers, the size of the iceberg has not previously been characterized. Results can be used for inclusion of the distribution of cows in different infection stages at different ages...

  16. Large litter sizes

    DEFF Research Database (Denmark)

    Sandøe, Peter; Rutherford, K.M.D.; Berg, Peer

    2012-01-01

    This paper presents some key results and conclusions from a review (Rutherford et al. 2011) undertaken regarding the ethical and welfare implications of breeding for large litter size in the domestic pig and about different ways of dealing with these implications. Focus is primarily on the direct...... adverse consequences for animal welfare of Danish breeding for large litter sizes due to increased piglet mortality and the subsequent attempts to reverse these consequences by breeding for number of live piglets at day five rather than number of piglets born. By this change of breeding goal it seems...

  17. Retinal Nerve Fiber Layer Thicknesses in Three Different Optic Nerve Head Size Groups Measured by Cirrus Spectral Domain Optical Coherence Tomography

    Directory of Open Access Journals (Sweden)

    Sirel Gür Güngör

    2016-04-01

    Full Text Available Objectives: To compare the retinal nerve fiber layer (RNFL thicknesses in three different optic nerve head (ONH size groups measured by Cirrus spectral domain optical coherence tomography (OCT. Materials and Methods: Between January and March 2013, 253 eyes of 253 healthy subjects were enrolled in this study (mean age: 42.7±7.4 years [28-62 years]; 121 men and 132 women. The patients were divided into 3 groups according to ONH size: 77 patients in the “small ONH” group (ONH area 1.97 mm2. Results: There were significant differences in superior (p=0.008, inferior (p=0.004 and average RNFL thickness (p=0.001 between the small, medium and large ONH groups. Positive correlations between ONH size and inferior/average RNFL thicknesses were significant but very weak (r=0.150, p=0.017 and r=0.157, p=0.013 respectively. Conclusion: RNFL thickness as measured by Cirrus OCT is positively correlated with ONH size and the differences in RNFL thickness were statistically significant between groups. This correlation and difference may be the result of a varying distance between the circular scan and the ONH margin.

  18. Simulating grain size estimation

    Czech Academy of Sciences Publication Activity Database

    Saxl, Ivan; Sülleiová, K.; Ponížil, P.

    2001-01-01

    Roč. 39, č. 6 (2001), s. 396-409 ISSN 0023-432X R&D Projects: GA ČR GA201/99/0269 Keywords : grain size estimation% ASTM standards%Voronoi tessellations Subject RIV: BE - Theoretical Physics Impact factor: 0.343, year: 2001

  19. Aircrew Sizing Survey 2011

    Science.gov (United States)

    2014-10-01

    the aircrew population is growing heavier and exhibiting some increased measurements related to increased mass. 15. SUBJECT TERMS anthropometry , body...LIST ACSS Aircrew Sizing Survey AFB Air Force Base ANSUR Army Anthropometric Survey CAESAR Civilian American & European Surface Anthropometry ...Surface Anthropometry Resource (CAESAR) was developed for the Joint Strike Fighter (JSF) program. The ACSS was intended to replace the JSF-CAESAR

  20. Size-dependent thermoelasticity

    Directory of Open Access Journals (Sweden)

    Ali R. Hadjesfandiari

    Full Text Available In this paper a consistent theory is developed for size-dependent thermoelasticity in heterogeneous anisotropic solids. This theory shows that the temperature change can create not only thermal strains, but also thermal mean curvatures in the solids. This formulation is based on the consistent size-dependent continuum mechanics in which the couple-stress tensor is skew-symmetric. Here by including scale-dependent measures in the energy and entropy equations, the general expressions for force- and couple-stresses, as well as entropy density, are obtained. Next, for the linear material the constitutive relations and governing coupled size-dependent thermoelasticity equations are developed. For linear material, one can see that the thermal properties are characterized by the classical symmetric thermal expansion tensor and the new size-dependent skew-symmetric thermal flexion tensor. Thus, for the most general anisotropic case, there are nine independent thermoelastic constants. Interestingly, for isotropic and cubic materials the thermal flexion tensor vanishes, which shows there is no thermal mean curvature

  1. Calculating Optimal Inventory Size

    Directory of Open Access Journals (Sweden)

    Ruby Perez

    2010-01-01

    Full Text Available The purpose of the project is to find the optimal value for the Economic Order Quantity Model and then use a lean manufacturing Kanban equation to find a numeric value that will minimize the total cost and the inventory size.

  2. Green Lot-Sizing

    NARCIS (Netherlands)

    M. Retel Helmrich (Mathijn Jan)

    2013-01-01

    textabstractThe lot-sizing problem concerns a manufacturer that needs to solve a production planning problem. The producer must decide at which points in time to set up a production process, and when he/she does, how much to produce. There is a trade-off between inventory costs and costs associated

  3. Sizing up visualizations

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Rønne; Hornbæk, Kasper

    2011-01-01

    Whereas the literature is clear on the benefits of large displays and visualizations, little is known about their combination, that is, how display size affect the usability of visualizations. We describe a controlled experiment where 19 participants used focus+context, overview+detail, and zoomi...

  4. Space Station Energy Sizing

    Science.gov (United States)

    Rice, R. R.

    1983-01-01

    A general schematic for a space station power system is described. The major items of interest in the power system are the solar array, transfer devices, energy storage, and conversion equipment. Each item will have losses associated with it and must be utilized in any sizing study, and can be used as a checklist for itemizing the various system components.

  5. Selecting cryptographic key sizes

    OpenAIRE

    Verheul, E. R.; Lenstra, Arjen K.

    2001-01-01

    In this article we offer guidelines for the determination of key sizes for symmetric cryptosystems, RSA, and discrete logarithm-based cryptosystems both over finite fields and over groups of elliptic curves over prime fields. Our recommendations are based on a set of explicitly formulated parameter settings, combined with existing data points about the cryptosystems.

  6. SIZE OF LIVESTOCK AGRICULTURAL OPERATIONS

    Directory of Open Access Journals (Sweden)

    Bazbanela Stere

    2015-07-01

    Full Text Available The main goal of the paper is to map the performance of Romanian farms from the perspective of livestock agricultural operations using principal component analysis technique (PCA and similarities between Romania and other countries from UE. The empirical results reveal that animal breedings farms are grouped into two categories :small and middle sized farms ; and the fact that Romania , one of Europe’s major forces in the field of livestock husbandry, has come to be one of the biggest importers of food products, although, by tradition, it is one of the continent’s countries with ideal conditions for breeding all species of animals. When clustering the countries we observ that in countries such as Greece, Italy, Portugal, Spain, cow farms, for example, do not exceed 10-16 heads and in Holland, England, Denmark, Belgium and France, the average farm size reaches 30-70 heads of milk cows. The cluster analysis revealed that in livestock operations, animal stock is the one that generates production, while the animal number indicates the size of the livestock unit.

  7. Space power subsystem sizing

    International Nuclear Information System (INIS)

    Geis, J.W.

    1992-01-01

    This paper discusses a Space Power Subsystem Sizing program which has been developed by the Aerospace Power Division of Wright Laboratory, Wright-Patterson Air Force Base, Ohio. The Space Power Subsystem program (SPSS) contains the necessary equations and algorithms to calculate photovoltaic array power performance, including end-of-life (EOL) and beginning-of-life (BOL) specific power (W/kg) and areal power density (W/m 2 ). Additional equations and algorithms are included in the spreadsheet for determining maximum eclipse time as a function of orbital altitude, and inclination. The Space Power Subsystem Sizing program (SPSS) has been used to determine the performance of several candidate power subsystems for both Air Force and SDIO potential applications. Trade-offs have been made between subsystem weight and areal power density (W/m 2 ) as influenced by orbital high energy particle flux and time in orbit

  8. Trueness and precision of digital impressions obtained using an intraoral scanner with different head size in the partially edentulous mandible.

    Science.gov (United States)

    Hayama, Hironari; Fueki, Kenji; Wadachi, Juro; Wakabayashi, Noriyuki

    2018-03-01

    It remains unclear whether digital impressions obtained using an intraoral scanner are sufficiently accurate for use in fabrication of removable partial dentures. We therefore compared the trueness and precision between conventional and digital impressions in the partially edentulous mandible. Mandibular Kennedy Class I and III models with soft silicone simulated-mucosa placed on the residual edentulous ridge were used. The reference models were converted to standard triangulated language (STL) file format using an extraoral scanner. Digital impressions were obtained using an intraoral scanner with a large or small scanning head, and converted to STL files. For conventional impressions, pressure impressions of the reference models were made and working casts fabricated using modified dental stone; these were converted to STL file format using an extraoral scanner. Conversion to STL file format was performed 5 times for each method. Trueness and precision were evaluated by deviation analysis using three-dimensional image processing software. Digital impressions had superior trueness (54-108μm), but inferior precision (100-121μm) compared to conventional impressions (trueness 122-157μm, precision 52-119μm). The larger intraoral scanning head showed better trueness and precision than the smaller head, and on average required fewer scanned images of digital impressions than the smaller head (pimpressions. Digital impressions are partially comparable to conventional impressions in terms of accuracy; the use of a larger scanning head may improve the accuracy for removable partial denture fabrication. Copyright © 2018 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  9. Small size ion pumps

    International Nuclear Information System (INIS)

    Cyranski, R.; Kiliszek, Cz.R.; Marks, J.; Sobolewski, A.; Magielko, H.

    2001-01-01

    This paper describes some designs of the two versions ion pumps and their range operation for various magnetic fields. The first version is made with different cell size in the anode element and titanium cathode operating in magnetic field from 600 to 650 Gs and the second version with the same anode element but differential Ti/Ta cathode working in magnetic field above 1200 Gs

  10. On the relationship between head circumference, brain size, prenatal long-chain PUFA/5-methyltetrahydrofolate supplementation and cognitive abilities during childhood.

    Science.gov (United States)

    Catena, Andrés; Martínez-Zaldívar, Cristina; Diaz-Piedra, Carolina; Torres-Espínola, Francisco J; Brandi, Pilar; Pérez-García, Miguel; Decsi, Tamás; Koletzko, Berthold; Campoy, Cristina

    2017-03-29

    Head circumference in infants has been reported to predict brain size, total grey matter volume (GMV) and neurocognitive development. However, it is unknown whether it has predictive value on regional and subcortical brain volumes. We aimed to explore the relationship between several head circumference measurements since birth and distributions of GMV and subcortical volumes at later childhood. We examined seventy-four, Caucasian, singleton, term-born infants born to mothers randomised to receive fish oil and/or 5-methyltetrahydrofolate or placebo prenatal supplementation. We assessed head circumference at birth and at 4 and 10 years of age and cognitive abilities at 7 years of age. We obtained brain MRI at 10 years of age, on which we performed voxel-based morphometry, cortical surface extraction and subcortical segmentation. Analyses were controlled for sex, age, height, weight, family status, laterality and total intracranial volume. Prenatal supplementation did not affect head circumference at any age, cognitive abilities or total brain volumes. Head circumference at 4 years presented the highest correlation with total GMV, white matter volume and brain surface area, and was also strongly associated with GMV of frontal, temporal and occipital areas, as well as with caudate nucleus, globus pallidus, putamen and thalamus volumes. As relationships between brain volumes in childhood and several outcomes extend into adulthood, we have found that ages between 0 and 4 years as the optimal time for brain growth; postnatal factors might have the most relevant impact on structural maturation of certain cortical areas and subcortical nuclei, independent of prenatal supplementation.

  11. Spectra of photons and neutrons generated in a heterogeneous head of a 15 MV LINAC at differents field sizes

    Energy Technology Data Exchange (ETDEWEB)

    Benites-Rengifo, J. L.; Vega-Carrillo, H. R.; Velazquez-Fernandez, J. B. [Posgrado en CBAP, Universidad Autonoma de Nayarit, Carretera Tepic-Compostela km 9. C.P. 63780. Xalisco, Nayarit (Mexico); Unidad Academica de Estudios Nucleares, Universidad Autonoma de Zacatecas, Apdo. Postal 336, 98000 Zacatecas, Zac. (Mexico); Posgrado en CBAP, Universidad Autonoma de Nayarit, Carretera Tepic-Compostela km 9. C.P. 63780. Xalisco, Nayarit (Mexico)

    2012-10-23

    Spectra of photons and neutrons were calculated, using the Monte Carlo code MCNP-5 using the e/p/n mode. A heterogeneous model was used to define the linac head where the collimators were modeled to produce five different treatment fields at the isocenter. Photon and neutron spectra were estimated in several points along two directions from the isocenter. The total photon fluence beyond 60 cm behaves according to 1/r{sup 2} rule, while total neutron fluence, beyond 80 cm, can be described by diffusion theory using an infinite plane as a neutron source.

  12. Size and Reputation

    DEFF Research Database (Denmark)

    Jakobsen, Peter Viggo; Ringsmose, Jens

    2015-01-01

    Denmark appears far more successful in managing its ‘special’ relationship with the USA than the UK since 9/11. By doing exactly the same as the UK, but on a much smaller scale and at much lower cost in terms of blood, treasure and domestic controversy, Denmark has succeeded in generating more...... American public gratitude than the UK. While London has been accused of losing Basra and Musa Qaleh, Copenhagen has been showered with praise and top-posts in NATO. This article explains why demonstrating how the differences in size and reputation gave rise to different expectations of the special...

  13. Large litter sizes

    DEFF Research Database (Denmark)

    Sandøe, Peter; Rutherford, K.M.D.; Berg, Peer

    2012-01-01

    This paper presents some key results and conclusions from a review (Rutherford et al. 2011) undertaken regarding the ethical and welfare implications of breeding for large litter size in the domestic pig and about different ways of dealing with these implications. Focus is primarily on the direct...... possible to achieve a drop in relative piglet mortality and the related welfare problems. However, there will be a growing problem with the need to use foster or nurse sows which may have negative effects on both sows and piglets. This gives rise to new challenges for management....

  14. Effects of season, sex and body size on the feeding ecology of turtle-headed sea snakes ( Emydocephalus annulatus) on IndoPacific inshore coral reefs

    Science.gov (United States)

    Goiran, C.; Dubey, S.; Shine, R.

    2013-06-01

    In terrestrial snakes, many cases of intraspecific shifts in dietary habits as a function of predator sex and body size are driven by gape limitation and hence are most common in species that feed on relatively large prey and exhibit a wide body-size range. Our data on sea snakes reveal an alternative mechanism for intraspecific niche partitioning, based on sex-specific seasonal anorexia induced by reproductive activities. Turtle-headed sea snakes ( Emydocephalus annulatus) on coral reefs in the New Caledonian Lagoon feed entirely on the eggs of demersal-spawning fishes. DNA sequence data (cytochrome b gene) on eggs that we palpated from stomachs of 37 snakes showed that despite this ontogenetic stage specialization, the prey comes from a taxonomically diverse array of species including damselfish (41 % of samples, at least 5 species), blennies (41 %, 4 species) and gobies (19 %, 5 species). The composition of snake diets shifted seasonally (with damselfish dominating in winter but not summer), presumably reflecting seasonality of fish reproduction. That seasonal shift affects male and female snakes differently, because reproduction is incompatible with foraging. Adult female sea snakes ceased feeding when they became heavily distended with developing embryos in late summer, and males ceased feeding while they were mate searching in winter. The sex divergence in foraging habits may be amplified by sexual size dimorphism; females grow larger than males, and larger snakes (of both sexes) feed more on damselfish (which often lay their eggs in exposed sites) than on blennies and gobies (whose eggs are hidden within narrow crevices). Specific features of reproductive biology of coral reef fish (seasonality and nest type) have generated intraspecific niche partitioning in these sea snakes, by mechanisms different from those that apply to terrestrial snakes.

  15. Temporomandibular joint assessment in patients with articular disc displacement by way of computed tomography - radiological parameters of shape, size and location of mandibular heads

    Directory of Open Access Journals (Sweden)

    Szabelska Anna

    2015-09-01

    Full Text Available Conventional and modern methods of radiological imaging are often used in the diagnosis of temporomandibular joint disorders, and the CT technique is particularly characterized by an excellent visualization of bony structures. The aim of the study was to show the importance and role of CT in the evaluation of TMJ bone structures in both patients with articular disc displacement and in a group of healthy subjects. Both study groups were assessed with the use of the transverse plane. Herein, multi-slice spiral computed tomography was performed in 47 subjects. These individuals were qualified for CT by way of magnetic resonance imaging, due to their being diagnosed with a displacement of their temporomandibular joint disc. The product of our study is presented as a set of tables. These are comparisons of radiological parameters based on the shape, size and location of the mandibular head, in the examined patients, in a control group, and with regard to sex. The results of our work indicate that CT can be successfully used in the imaging of TMJ bone structures, specifically, the condylar process of the mandibular head and the joint socket. However, statistically significant differences of the utilized parameters between patients with articular disc displacement and controls, warrant further analysis of this issue.

  16. Osteonecrosis of the femoral head: using CT, MRI and gross specimen to characterize the location, shape and size of the lesion

    Science.gov (United States)

    Hu, L B; Wei, H Y; Wang, W; Ren, A; Xu, Y Y

    2015-01-01

    Objective: To investigate the accuracy of using CT and MRI to characterize lesions of osteonecrosis of the femoral head (ONFH). Methods: Coronal CT and MRI scans were performed on 30 femoral head specimens collected from 23 patients who had undertaken hip arthroplasty owing to ONFH. The results were compared with findings from coronal sectional gross specimens. Two radiologists independently measured the volume of necrotic lesions from CT and MR images using computer software, and the results were averaged. The volume of specimens' necrotic lesion was measured using the water displacement method. Results: There was a high degree of consistency between CT, MRI and the coronal sectional gross specimen on the location, shape and spatial structure of lesions. Differences of the lesion volume measured from CT and MR images were not statistically significant between two radiologists. The necrotic lesion volumes measured from CT and MR images and gross specimens were 22.07 ±5.35, 22.21 ± 5.15 and 21.12 ±4.96 cm3, respectively, and the differences were not statistically significant (F = 0.396; p = 0.674). Conclusion: For patients with ONFH in Association Research Circulation Osseous stage III or above, CT and MRI can accurately display the characterization of lesion. Advances in knowledge: The size and location of necrotic lesions are major factors associated with femoral head collapse. CT is superior to MRI in identifying subchondral fracture. CT can help diagnose and predict the prognosis of ONFH. PMID:25496444

  17. Sizing and fit of bra's

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2007-01-01

    It is often reported that 70% or more of women wear the wrong-sized bra. A fact is that many women complain about bra fit even though the number of available sizes varies from 20 to 100. Sizing of bras is based on under bust circumference and its difference with circumference over the bust (cup

  18. Is clutch size individually optimized?

    NARCIS (Netherlands)

    Tinbergen, J.M.; Both, C.

    1999-01-01

    Brood size manipulations were carried out to test whether clutch size variation in individual great tits (Parus major) controlled for laying date was tuned to their phenotypic quality and/or local food abundance (individual optimization hypothesis; IOH). Broods with different original clutch sizes,

  19. L-DOPA decarboxylase mRNA expression is associated with tumor stage and size in head and neck squamous cell carcinoma: a retrospective cohort study

    Directory of Open Access Journals (Sweden)

    Geomela Panagiota-Aikaterini

    2012-10-01

    Full Text Available Abstract Background Head and neck squamous cell carcinoma (HNSCC represents one of the most commonly diagnosed malignancies worldwide. The DDC gene encodes L-DOPA decarboxylase, an enzyme catalyzing the decarboxylation of L-DOPA to dopamine. We have recently shown that DDC mRNA is a significant predictor of patients’ prognosis in colorectal adenocarcinoma and prostate cancer. The aim of the current study was to analyze the DDC mRNA expression in HNSCC patients. Methods 53 malignant tumors were resected from the larynx, pharynx, tongue, buccal mucosa, parotid glands, and nasal cavity, as well as from 34 adjacent non-cancerous tissues of HNSCC patients, and were homogenized. Total RNA was isolated and converted into first-strand cDNA. An ultrasensitive real-time PCR method based on the SYBR Green chemistry was used for DDC mRNA quantification in head and neck tissue specimens. Relative quantification was performed using the comparative Ct (2-ddCt method. Results DDC mRNA levels were lower in squamous cell carcinomas (SCCs of the larynx and tongue than in adjacent non-cancerous tissue specimens. Furthermore, low DDC mRNA expression was noticed in laryngeal and tongue tumors of advanced TNM stage or bigger size, compared to early-stage or smaller tumors, respectively. No statistically significant differences were observed between SCCs resected from pharynx, buccal mucosa, or nasal cavity, and their normal counterparts. Conclusion This is the first study examining the DDC mRNA expression in HNSCC. According to our results, DDC mRNA expression may constitute a potential prognostic biomarker in tongue and/or larynx SCCs, which principally represent the overwhelming majority of HNSCC cases.

  20. Asymptotic size determines species abundance in the marine size spectrum

    DEFF Research Database (Denmark)

    Andersen, Ken Haste; Beyer, Jan

    2006-01-01

    The majority of higher organisms in the marine environment display indeterminate growth; that is, they continue to grow throughout their life, limited by an asymptotic size. We derive the abundance of species as a function of their asymptotic size. The derivation is based on size-spectrum theory......, where population structure is derived from physiology and simple arguments regarding the predator-prey interaction. Using a hypothesis of constant satiation, which states that the average degree of satiation is independent of the size of an organism, the number of individuals with a given size is found...... to be proportional to the weight raised to the power -2.05, independent of the predator/prey size ratio. This is the first time the spectrum exponent has been derived solely on the basis of processes at the individual level. The theory furthermore predicts that the parameters in the von Bertalanffy growth function...

  1. Radar Detectability Studies of Slow and Small Zodiacal Dust Cloud Particles. III. The Role of Sodium and the Head Echo Size on the Probability of Detection

    Science.gov (United States)

    Janches, D.; Swarnalingam, N.; Carrillo-Sanchez, J. D.; Gomez-Martin, J. C.; Marshall, R.; Nesvorny, D.; Plane, J. M. C.; Feng, W.; Pokorny, P.

    2017-01-01

    We present a path forward on a long-standing issue concerning the flux of small and slow meteoroids, which are believed to be the dominant portion of the incoming meteoric mass flux into the Earth's atmosphere. Such a flux, which is predicted by dynamical dust models of the Zodiacal Cloud, is not evident in ground-based radar observations. For decades this was attributed to the fact that the radars used for meteor observations lack the sensitivity to detect this population, due to the small amount of ionization produced by slow-velocity meteors. Such a hypothesis has been challenged by the introduction of meteor head echo (HE) observations with High Power and Large Aperture radars, in particular the Arecibo 430 MHz radar. Janches et al. developed a probabilistic approach to estimate the detectability of meteors by these radars and initially showed that, with the current knowledge of ablation and ionization, such particles should dominate the detected rates by one to two orders of magnitude compared to the actual observations. In this paper, we include results in our model from recently published laboratory measurements, which showed that (1) the ablation of Na is less intense covering a wider altitude range; and (2) the ionization probability, Beta ip, for Na atoms in the air is up to two orders of magnitude smaller for low speeds than originally believed. By applying these results and using a somewhat smaller size of the HE radar target we offer a solution that reconciles these observations with model predictions.

  2. Sauropod dinosaurs evolved moderately sized genomes unrelated to body size.

    Science.gov (United States)

    Organ, Chris L; Brusatte, Stephen L; Stein, Koen

    2009-12-22

    Sauropodomorph dinosaurs include the largest land animals to have ever lived, some reaching up to 10 times the mass of an African elephant. Despite their status defining the upper range for body size in land animals, it remains unknown whether sauropodomorphs evolved larger-sized genomes than non-avian theropods, their sister taxon, or whether a relationship exists between genome size and body size in dinosaurs, two questions critical for understanding broad patterns of genome evolution in dinosaurs. Here we report inferences of genome size for 10 sauropodomorph taxa. The estimates are derived from a Bayesian phylogenetic generalized least squares approach that generates posterior distributions of regression models relating genome size to osteocyte lacunae volume in extant tetrapods. We estimate that the average genome size of sauropodomorphs was 2.02 pg (range of species means: 1.77-2.21 pg), a value in the upper range of extant birds (mean = 1.42 pg, range: 0.97-2.16 pg) and near the average for extant non-avian reptiles (mean = 2.24 pg, range: 1.05-5.44 pg). The results suggest that the variation in size and architecture of genomes in extinct dinosaurs was lower than the variation found in mammals. A substantial difference in genome size separates the two major clades within dinosaurs, Ornithischia (large genomes) and Saurischia (moderate to small genomes). We find no relationship between body size and estimated genome size in extinct dinosaurs, which suggests that neutral forces did not dominate the evolution of genome size in this group.

  3. Is there a single spot size and grid for intensity modulated proton therapy? Simulation of head and neck, prostate and mesothelioma cases

    International Nuclear Information System (INIS)

    Widesott, Lamberto; Lomax, Antony J.; Schwarz, Marco

    2012-01-01

    Purpose: To assess the quality of dose distributions in real clinical cases for different dimensions of scanned proton pencil beams. The distance between spots (i.e., the grid of delivery) is optimized for each dimension of the pencil beam. Methods: The authors vary the σ of the initial Gaussian size of the spot, from σ x = σ y = 3 mm to σ x = σ y = 8 mm, to evaluate the impact of the proton beam size on the quality of intensity modulated proton therapy (IMPT) plans. The distance between spots, Δx and Δy, is optimized on the spot plane, ranging from 4 to 12 mm (i.e., each spot size is coupled with the best spot grid resolution). In our Hyperion treatment planning system (TPS), constrained optimization is applied with respect to the organs at risk (OARs), i.e., the optimization tries to satisfy the dose objectives in the planning target volume (PTV) as long as all planning objectives for the OARs are met. Three-field plans for a nasopharynx case, two-field plans for a prostate case, and two-field plans for a malignant pleural mesothelioma case are considered in our analysis. Results: For the head and neck tumor, the best grids (i.e., distance between spots) are 5, 4, 6, 6, and 8 mm for σ = 3, 4, 5, 6, and 8 mm, respectively. σ ≤ 5 mm is required for tumor volumes with low dose and σ≤ 4 mm for tumor volumes with high dose. For the prostate patient, the best grid is 4, 4, 5, 5, and 5 mm for σ = 3, 4, 5, 6, and 8 mm, respectively. Beams with σ > 3 mm did not satisfy our first clinical requirement that 95% of the prescribed dose is delivered to more than 95% of prostate and proximal seminal vesicles PTV. Our second clinical requirement, to cover the distal seminal vesicles PTV, is satisfied for beams as wide as σ = 6 mm. For the mesothelioma case, the low dose PTV prescription is well respected for all values of σ, while there is loss of high dose PTV coverage for σ > 5 mm. The best grids have a spacing of 6, 7, 8, 9, and 12 mm for σ = 3, 4, 5, 6

  4. Is there a single spot size and grid for intensity modulated proton therapy? Simulation of head and neck, prostate and mesothelioma cases

    Energy Technology Data Exchange (ETDEWEB)

    Widesott, Lamberto; Lomax, Antony J.; Schwarz, Marco [AtreP, Agenzia Provinciale per la Protonterapia, 38122 Trento (Italy); Paul Scherrer Institute, 5232 Villigen (Switzerland); AtreP, Agenzia Provinciale per la Protonterapia, 38122 Trento (Italy)

    2012-03-15

    Purpose: To assess the quality of dose distributions in real clinical cases for different dimensions of scanned proton pencil beams. The distance between spots (i.e., the grid of delivery) is optimized for each dimension of the pencil beam. Methods: The authors vary the {sigma} of the initial Gaussian size of the spot, from {sigma}{sub x} = {sigma}{sub y} = 3 mm to {sigma}{sub x} = {sigma}{sub y} = 8 mm, to evaluate the impact of the proton beam size on the quality of intensity modulated proton therapy (IMPT) plans. The distance between spots, {Delta}x and {Delta}y, is optimized on the spot plane, ranging from 4 to 12 mm (i.e., each spot size is coupled with the best spot grid resolution). In our Hyperion treatment planning system (TPS), constrained optimization is applied with respect to the organs at risk (OARs), i.e., the optimization tries to satisfy the dose objectives in the planning target volume (PTV) as long as all planning objectives for the OARs are met. Three-field plans for a nasopharynx case, two-field plans for a prostate case, and two-field plans for a malignant pleural mesothelioma case are considered in our analysis. Results: For the head and neck tumor, the best grids (i.e., distance between spots) are 5, 4, 6, 6, and 8 mm for {sigma} = 3, 4, 5, 6, and 8 mm, respectively. {sigma} {<=} 5 mm is required for tumor volumes with low dose and {sigma}{<=} 4 mm for tumor volumes with high dose. For the prostate patient, the best grid is 4, 4, 5, 5, and 5 mm for {sigma} = 3, 4, 5, 6, and 8 mm, respectively. Beams with {sigma} > 3 mm did not satisfy our first clinical requirement that 95% of the prescribed dose is delivered to more than 95% of prostate and proximal seminal vesicles PTV. Our second clinical requirement, to cover the distal seminal vesicles PTV, is satisfied for beams as wide as {sigma} = 6 mm. For the mesothelioma case, the low dose PTV prescription is well respected for all values of {sigma}, while there is loss of high dose PTV coverage

  5. Consequences of sex-specific growth on sibling competition in black-headed gulls : A sexually-size dimorphic species with scramble competition

    NARCIS (Netherlands)

    Mueller, Wendt; Groothuis, Ton G. G.; Dijkstra, Cor

    2007-01-01

    Biased mortality of the larger sex during the early developmental period has been reported for a number of size-dimorphic bird species. This can partly be explained by the fact that growing to larger size renders the larger sex more vulnerable to food shortage. However, since sibling rivalry is

  6. Size Matters: Individual Variation in Ectotherm Growth and Asymptotic Size.

    Directory of Open Access Journals (Sweden)

    Richard B King

    Full Text Available Body size, and, by extension, growth has impacts on physiology, survival, attainment of sexual maturity, fecundity, generation time, and population dynamics, especially in ectotherm animals that often exhibit extensive growth following attainment of sexual maturity. Frequently, growth is analyzed at the population level, providing useful population mean growth parameters but ignoring individual variation that is also of ecological and evolutionary significance. Our long-term study of Lake Erie Watersnakes, Nerodia sipedon insularum, provides data sufficient for a detailed analysis of population and individual growth. We describe population mean growth separately for males and females based on size of known age individuals (847 captures of 769 males, 748 captures of 684 females and annual growth increments of individuals of unknown age (1,152 males, 730 females. We characterize individual variation in asymptotic size based on repeated measurements of 69 males and 71 females that were each captured in five to nine different years. The most striking result of our analyses is that asymptotic size varies dramatically among individuals, ranging from 631-820 mm snout-vent length in males and from 835-1125 mm in females. Because female fecundity increases with increasing body size, we explore the impact of individual variation in asymptotic size on lifetime reproductive success using a range of realistic estimates of annual survival. When all females commence reproduction at the same age, lifetime reproductive success is greatest for females with greater asymptotic size regardless of annual survival. But when reproduction is delayed in females with greater asymptotic size, lifetime reproductive success is greatest for females with lower asymptotic size when annual survival is low. Possible causes of individual variation in asymptotic size, including individual- and cohort-specific variation in size at birth and early growth, warrant further

  7. Size Matters: Individual Variation in Ectotherm Growth and Asymptotic Size

    Science.gov (United States)

    King, Richard B.

    2016-01-01

    Body size, and, by extension, growth has impacts on physiology, survival, attainment of sexual maturity, fecundity, generation time, and population dynamics, especially in ectotherm animals that often exhibit extensive growth following attainment of sexual maturity. Frequently, growth is analyzed at the population level, providing useful population mean growth parameters but ignoring individual variation that is also of ecological and evolutionary significance. Our long-term study of Lake Erie Watersnakes, Nerodia sipedon insularum, provides data sufficient for a detailed analysis of population and individual growth. We describe population mean growth separately for males and females based on size of known age individuals (847 captures of 769 males, 748 captures of 684 females) and annual growth increments of individuals of unknown age (1,152 males, 730 females). We characterize individual variation in asymptotic size based on repeated measurements of 69 males and 71 females that were each captured in five to nine different years. The most striking result of our analyses is that asymptotic size varies dramatically among individuals, ranging from 631–820 mm snout-vent length in males and from 835–1125 mm in females. Because female fecundity increases with increasing body size, we explore the impact of individual variation in asymptotic size on lifetime reproductive success using a range of realistic estimates of annual survival. When all females commence reproduction at the same age, lifetime reproductive success is greatest for females with greater asymptotic size regardless of annual survival. But when reproduction is delayed in females with greater asymptotic size, lifetime reproductive success is greatest for females with lower asymptotic size when annual survival is low. Possible causes of individual variation in asymptotic size, including individual- and cohort-specific variation in size at birth and early growth, warrant further investigation. PMID

  8. Effect sizes in memory research.

    Science.gov (United States)

    Morris, Peter E; Fritz, Catherine O

    2013-01-01

    Effect sizes are omitted from many research articles and are rarely discussed. To help researchers evaluate effect sizes we collected values for the more commonly reported effect size measures (partial eta squared and d) from papers reporting memory research published in 2010. Cohen's small, medium, and large generic guideline values for d mapped neatly onto the observed distributions, but his values for partial eta squared were considerably lower than those observed in current memory research. We recommend interpreting effect sizes in the context of either domain-specific guideline values agreed for an area of research or the distribution of effect size estimates from published research in the domain. We provide cumulative frequency tables for both partial eta squared and d enabling authors to report and consider not only the absolute size of observed effects but also the percentage of reported effects that are larger or smaller than those observed.

  9. On the Relationship between Pollen Size and Genome Size

    Directory of Open Access Journals (Sweden)

    Charles A. Knight

    2010-01-01

    Full Text Available Here we test whether genome size is a predictor of pollen size. If it were, inferences of ancient genome size would be possible using the abundant paleo-palynolgical record. We performed regression analyses across 464 species of pollen width and genome size. We found a significant positive trend. However, regression analysis using phylogentically independent contrasts did not support the correlated evolution of these traits. Instead, a large split between angiosperms and gymnosperms for both pollen width and genome size was revealed. Sister taxa were not more likely to show a positive contrast when compared to deeper nodes. However, significantly more congeneric species had a positive trend than expected by chance. These results may reflect the strong selection pressure for pollen to be small. Also, because pollen grains are not metabolically active when measured, their biology is different than other cells which have been shown to be strongly related to genome size, such as guard cells. Our findings contrast with previously published research. It was our hope that pollen size could be used as a proxy for inferring the genome size of ancient species. However, our results suggest pollen is not a good candidate for such endeavors.

  10. The size of the nucleosome

    DEFF Research Database (Denmark)

    Bohr, Jakob; Olsen, Kasper

    2011-01-01

    The structural origin of the size of the 11 nm nucleosomal disc is addressed. On the nanometer length-scale the organization of DNA as chromatin in the chromosomes involves a coiling of DNA around the histone core of the nucleosome. We suggest that the size of the nucleosome core particle......-pairs of the linker-DNA is included the estimate of the size of an ideal nucleosome is in close agreement with the experimental numbers. Interestingly, the size of the nucleosome is shown to be a consequence of intrinsic properties of the DNA double helix....

  11. Material grain size and crack size influences on cleavage fracturing.

    Science.gov (United States)

    Armstrong, Ronald W

    2015-03-28

    A review is given of the analogous dependence on reciprocal square root of grain size or crack size of fracture strength measurements reported for steel and other potentially brittle materials. The two dependencies have much in common. For onset of cleavage in steel, attention is focused on relationship of the essentially athermal fracture stress compared with a quite different viscoplastic yield stress behaviour. Both grain-size-dependent stresses are accounted for in terms of dislocation pile-up mechanics. Lowering of the cleavage stress occurs in steel because of carbide cracking. For crack size dependence, there is complication of localized crack tip plasticity in fracture mechanics measurements. Crack-size-dependent conventional and indentation fracture mechanics measurements are described also for results obtained on the diverse materials: polymethylmethacrylate, silicon crystals, alumina polycrystals and WC-Co (cermet) composites. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  12. Size did not matter: An evolutionary account of the variation in penis size and size anxiety

    Directory of Open Access Journals (Sweden)

    Menelaos Apostolou

    2016-12-01

    Full Text Available The human penis exhibits considerable variation in size, while a substantial proportion of the adult male population experiences size anxiety. This paper employs an evolutionary framework in order to understand this variation, as well as the concern men exhibit about the adequacy of the size of their penis. It is argued that female choice has been one important sexual selection force, responsible for shaping the size of the penis. However, this force has been relatively weak, because women do not consider the size of their partners’ penis to be the most important determinant of their sexual satisfaction. Also, in ancestral human societies, sexual satisfaction was a secondary concern, while women had limited space to exercise mate choice. The mismatch between ancestral and modern conditions, with female choice being stronger in the present than in the past, causes anxiety in men about their ability to satisfy their partners, which is also manifested in their concerns about size.

  13. Missing portion sizes in FFQ

    DEFF Research Database (Denmark)

    Køster-Rasmussen, Rasmus; Siersma, Volkert Dirk; Halldorson, Thorhallur I.

    2015-01-01

    -nearest neighbours (KNN) were compared with a reference based on self-reported portion sizes (quantified by a photographic food atlas embedded in the FFQ). Setting: The Danish Health Examination Survey 2007–2008. Subjects: The study included 3728 adults with complete portion size data. Results: Compared...

  14. Mapped Plot Patch Size Estimates

    Science.gov (United States)

    Paul C. Van Deusen

    2005-01-01

    This paper demonstrates that the mapped plot design is relatively easy to analyze and describes existing formulas for mean and variance estimators. New methods are developed for using mapped plots to estimate average patch size of condition classes. The patch size estimators require assumptions about the shape of the condition class, limiting their utility. They may...

  15. Food aroma affects bite size

    Directory of Open Access Journals (Sweden)

    de Wijk René A

    2012-03-01

    Full Text Available Abstract Background To evaluate the effect of food aroma on bite size, a semisolid vanilla custard dessert was delivered repeatedly into the mouth of test subjects using a pump while various concentrations of cream aroma were presented retronasally to the nose. Termination of the pump, which determined bite size, was controlled by the subject via a push button. Over 30 trials with 10 subjects, the custard was presented randomly either without an aroma, or with aromas presented below or near the detection threshold. Results Results for ten subjects (four females and six males, aged between 26 and 50 years, indicated that aroma intensity affected the size of the corresponding bite as well as that of subsequent bites. Higher aroma intensities resulted in significantly smaller sizes. Conclusions These results suggest that bite size control during eating is a highly dynamic process affected by the sensations experienced during the current and previous bites.

  16. Container size influences snack food intake independently of portion size.

    Science.gov (United States)

    Marchiori, David; Corneille, Olivier; Klein, Olivier

    2012-06-01

    While larger containers have been found to increase food intake, it is unclear whether this effect is driven by container size, portion size, or their combination, as these variables are usually confounded. The study was advertised as examining the effects of snack food consumption on information processing and participants were served M&M's for free consumption in individual cubicles while watching a TV show. Participants were served (1) a medium portion of M&M's in a small (n=30) or (2) in a large container (n=29), or (3) a large portion in a large container (n=29). The larger container increased intake by 129% (199 kcal) despite holding portion size constant, while controlling for different confounding variables. This research suggests that larger containers stimulate food intake over and above their impact on portion size. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Materialised Ideals Sizes and Beauty

    Directory of Open Access Journals (Sweden)

    Kirsi Laitala

    2011-04-01

    Full Text Available Today’s clothing industry is based on a system where clothes are made in ready-to-wear sizes and meant to fit most people. Studies have pointed out that consumers are discontent with the use of these systems: size designations are not accurate enough to find clothing that fits, and different sizes are poorly available. This article discusses in depth who these consumers are, and which consumer groups are the most dissatisfied with today’s sizing systems. Results are based on a web survey where 2834 Nordic consumers responded, complemented with eight in-depth interviews, market analysis on clothing sizes and in-store trouser size measurements. Results indicate that higher shares of the consumers who have a body out of touch with the existing beauty ideals express discontentment with the sizing systems and the poor selection available. In particular, large women, very large men, and thin, short men are those who experience less priority in clothing stores and have more difficulties in finding clothes that fit. Consumers tend to blame themselves when the clothes do not fit their bodies, while our study points out that the industry is to blame as they do not produce clothing for all customers.

  18. Biological motion distorts size perception

    Science.gov (United States)

    Veto, Peter; Einhäuser, Wolfgang; Troje, Nikolaus F.

    2017-02-01

    Visual illusions explore the limits of sensory processing and provide an ideal testbed to study perception. Size illusions - stimuli whose size is consistently misperceived - do not only result from sensory cues, but can also be induced by cognitive factors, such as social status. Here we investigate, whether the ecological relevance of biological motion can also distort perceived size. We asked observers to judge the size of point-light walkers (PLWs), configurations of dots whose movements induce the perception of human movement, and visually matched control stimuli (inverted PLWs). We find that upright PLWs are consistently judged as larger than inverted PLWs, while static point-light figures do not elicit the same effect. We also show the phenomenon using an indirect paradigm: observers judged the relative size of a disc that followed an inverted PLW larger than a disc following an upright PLW. We interpret this as a contrast effect: The upright PLW is perceived larger and thus the subsequent disc is judged smaller. Together, these results demonstrate that ecologically relevant biological-motion stimuli are perceived larger than visually matched control stimuli. Our findings present a novel case of illusory size perception, where ecological importance leads to a distorted perception of size.

  19. Analog design centering and sizing

    CERN Document Server

    Graeb, Helmut E

    2007-01-01

    Here is a compendium of fundamental problem formulations of analog design centering and sizing. It provides a differentiated knowledge about the many tasks of analog design centering and sizing. In particular, coverage formulates the worst-case problem. The book stands at the interface between process technology and design technology, detailing how the two are required to reach a solution. It presents a mathematically founded description based on numerical optimization and statistics. This volume will enable analog and mixed-signal designers to assess CAD solution methods that are presented to them as well as help developers of analog CAD tools to formulate and develop solution approaches for analog design centering and sizing.

  20. Sibship Size and Educational Attainment

    DEFF Research Database (Denmark)

    Jæger, Mads Meier

    2009-01-01

    Studies on family background often explain the negative effect of sibship size on educational attainment by one of two theories: the Confluence Model (CM) or the Resource Dilution Hypothesis (RDH). However, as both theories - for substantively different reasons - predict that sibship size should...... to distinguish the two theories and to identify a unique RDH effect on educational attainment. Using sibling data from the Wisconsin Longitudinal Study (WLS) and a random effect Instrumental Variable model I find that, in addition to a negative effect on cognitive ability, sibship size also has a strong negative...

  1. Crystallite sizes of porites species

    International Nuclear Information System (INIS)

    Fadhlia Zafarina Zakaria; Julynnie Wajir; Fauziah Abdul Aziz

    2009-01-01

    This study was designed to investigate the crystallite sizes of Porites species. A set of 9 Porites skeletons i.e. Porites australiensis, Porites cylindrica, Porites lutea, Porites lichen, Porites digitata, Porites nigrescens, Porites rus, Porites annae and Porites sp. were studied by using X-Ray Diffraction method. The values of FWHM and theta (θ) are used in Scherrer equation to determine the crystallite sizes of all Porites samples. It was found that the crystallite sizes were in the range of 1000.78 - 1706.04 Angstrom. (author)

  2. Jurisdiction Size and Local Democracy

    DEFF Research Database (Denmark)

    Lassen, David Dreyer; Serritslew, Søren

    2011-01-01

    Optimal jurisdiction size is a cornerstone of government design. A strong tradition in political thought argues that democracy thrives in smaller jurisdictions, but existing studies of the effects of jurisdiction size, mostly cross-sectional in nature, yield ambiguous results due to sorting effects...... and problems of endogeneity. We focus on internal political efficacy, a psychological condition that many see as necessary for high-quality participatory democracy. We identify a quasiexperiment, a large-scale municipal reform in Denmark, which allows us to estimate a causal effect of jurisdiction size...... on internal political efficacy. The reform, affecting some municipalities, but not all, was implemented by the central government, and resulted in exogenous, and substantial, changes in municipal population size. Based on survey data collected before and after the reform, we find, using various difference...

  3. Analysis of glass fibre sizing

    DEFF Research Database (Denmark)

    Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl

    2014-01-01

    surfaces are called sizing. The sizing influences the properties of the interface between fibres and a matrix, and subsequently affects mechanical properties of composites. In this work the sizing of commercially available glass fibres was analysed so as to study the composition and chemical structures......Glass fibre reinforced polymer composites are widely used for industrial and engineering applications which include construction, aerospace, automotive and wind energy industry. During the manufacturing glass fibres, they are surface-treated with an aqueous solution. This process and the treated....... Soxhlet extraction was used to extract components of the sizing from the glass fibres. The glass fibres, their extracts and coated glass plates were analysed by Thermo-Gravimetric Analysis combined with a mass spectrometer (TGA-MS), and Attenuated Total Reflectance Fourier Transform Infrared (ATR...

  4. Sample size determination and power

    CERN Document Server

    Ryan, Thomas P, Jr

    2013-01-01

    THOMAS P. RYAN, PhD, teaches online advanced statistics courses for Northwestern University and The Institute for Statistics Education in sample size determination, design of experiments, engineering statistics, and regression analysis.

  5. Method for sizing hollow microspheres

    Science.gov (United States)

    Farnum, E.H.; Fries, R.J.

    1975-10-29

    Hollow Microspheres may be effectively sized by placing them beneath a screen stack completely immersed in an ultrasonic bath containing a liquid having a density at which the microspheres float and ultrasonically agitating the bath.

  6. Aerosol Size Distributions In Auckland.

    Czech Academy of Sciences Publication Activity Database

    Coulson, G.; Olivares, G.; Talbot, Nicholas

    2016-01-01

    Roč. 50, č. 1 (2016), s. 23-28 E-ISSN 1836-5876 Institutional support: RVO:67985858 Keywords : aerosol size distribution * particle number concentration * roadside Subject RIV: CF - Physical ; Theoretical Chemistry

  7. Size scaling of static friction.

    Science.gov (United States)

    Braun, O M; Manini, Nicola; Tosatti, Erio

    2013-02-22

    Sliding friction across a thin soft lubricant film typically occurs by stick slip, the lubricant fully solidifying at stick, yielding and flowing at slip. The static friction force per unit area preceding slip is known from molecular dynamics (MD) simulations to decrease with increasing contact area. That makes the large-size fate of stick slip unclear and unknown; its possible vanishing is important as it would herald smooth sliding with a dramatic drop of kinetic friction at large size. Here we formulate a scaling law of the static friction force, which for a soft lubricant is predicted to decrease as f(m)+Δf/A(γ) for increasing contact area A, with γ>0. Our main finding is that the value of f(m), controlling the survival of stick slip at large size, can be evaluated by simulations of comparably small size. MD simulations of soft lubricant sliding are presented, which verify this theory.

  8. Maternal pelvic dimensions and neonatal size

    Science.gov (United States)

    Figueiroa, José N; Alves, Joao G

    2017-01-01

    Abstract Patterns of fetal growth predict non-communicable disease risk in adult life, but fetal growth variability appears to have a relatively weak association with maternal nutritional dynamics during pregnancy. This challenges the interpretation of fetal growth variability as ‘adaptation’. We hypothesized that associations of maternal size and nutritional status with neonatal size are mediated by the dimensions of the maternal pelvis. We analysed data on maternal height, body mass index (BMI) and pelvic dimensions (conjugate, inter-spinous and inter-cristal diameters) and neonatal gestational age, weight, length, thorax girth and head girth (n = 224). Multiple regression analysis was used to identify independent maternal predictors of neonatal size, and the mediating role of neonatal head girth in these associations. Pelvic dimensions displaced maternal BMI as a predictor of birth weight, explaining 11.6% of the variance. Maternal conjugate and inter-spinous diameters predicted neonatal length, thorax girth and head girth, whereas inter-cristal diameter only predicted neonatal length. Associations of pelvic dimensions with birth length, but not birth weight, were mediated by neonatal head girth. Pelvic dimensions predicted neonatal size better than maternal BMI, and these associations were mostly independent of maternal height. Sensitivity of fetal growth to pelvic dimensions reduces the risk of cephalo-pelvic disproportion, potentially a strong selective pressure during secular trends in height. Selection on fetal adaptation to relatively inflexible components of maternal phenotype, rather than directly to external ecological conditions, may help explain high levels of growth plasticity during late fetal life and early infancy. PMID:29423225

  9. Size effects in crystal plasticity

    DEFF Research Database (Denmark)

    Borg, Ulrik

    2007-01-01

    Numerical analyses of plasticity size effects have been carried out for different problems using a developed strain gradient crystal plasticiy theory. The theory employs higher order stresses as work conjugates to slip gradients and uses higher order boundary conditions. Problems on localization...... of plastic flow in a single crystal, grain boundary effects in a bicrystal, and grain size effects in a polycrystal are studied. Single crystals containing micro-scale voids have also been analyzed at different loading conditions with focus on the stress and deformation fields around the voids, on void...

  10. On the role of body size, brain size, and eye size in visual acuity.

    Science.gov (United States)

    Corral-López, Alberto; Garate-Olaizola, Maddi; Buechel, Severine D; Kolm, Niclas; Kotrschal, Alexander

    2017-01-01

    The visual system is highly variable across species, and such variability is a key factor influencing animal behavior. Variation in the visual system, for instance, can influence the outcome of learning tasks when visual stimuli are used. We illustrate this issue in guppies ( Poecilia reticulata ) artificially selected for large and small relative brain size with pronounced behavioral differences in learning experiments and mate choice tests. We performed a study of the visual system by quantifying eye size and optomotor response of large-brained and small-brained guppies. This represents the first experimental test of the link between brain size evolution and visual acuity. We found that female guppies have larger eyes than male guppies, both in absolute terms and in relation to their body size. Likewise, individuals selected for larger brains had slightly larger eyes but not better visual acuity than small-brained guppies. However, body size was positively associated with visual acuity. We discuss our findings in relation to previous macroevolutionary studies on the evolution of brain morphology, eye morphology, visual acuity, and ecological variables, while stressing the importance of accounting for sensory abilities in behavioral studies. Pre-existing perceptual biases can be keys for the development of specific behavioral patterns. Hence, potential differences in sensory systems need to be taken into account in the study of animal behavior. We highlight this necessity concentrating on the visual domain and using experimental data on brain size-selected guppies in which we assessed eye size and visual acuity. Behavioral differences between large-brained and small-brained guppies in learning and mate choice predominantly relied on tests using visual cues. Analyses of visual capabilities in this system are therefore necessary. Furthermore, this system offers the unprecedented opportunity to experimentally test the relationship between brain size, eye morphology

  11. Size effects on cavitation instabilities

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Tvergaard, Viggo

    2006-01-01

    In metal-ceramic systems the constraint on plastic flow leads to so high stress triaxialities that cavitation instabilities may occur. If the void radius is on the order of magnitude of a characteristic length for the metal, the rate of void growth is reduced, and the possibility of unstable cavi...... as the void grows to a size well above the characteristic material length....

  12. On the optimal sizing problem

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui

    1994-01-01

    The paper studies the problem of determining the number and dimensions of sizes of apparel so as to maximize profits. It develops a simple one-variable bisection search algorithm that gives the optimal solution. An example is solved interactively using a Macintosh LC and Math CAD, a mathematical...

  13. Particle sizes from sectional data

    DEFF Research Database (Denmark)

    Pawlas, Zbynek; Nyengaard, Jens Randel; Jensen, Eva Bjørn Vedel

    2009-01-01

    We propose a new statistical method for obtaining information about particle size distributions from sectional data without specific assumptions about particle shape. The method utilizes recent advances in local stereology. We show how to estimate separately from sectional data the variance due t...

  14. Variability in human body size

    Science.gov (United States)

    Annis, J. F.

    1978-01-01

    The range of variability found among homogeneous groups is described and illustrated. Those trends that show significantly marked differences between sexes and among a number of racial/ethnic groups are also presented. Causes of human-body size variability discussed include genetic endowment, aging, nutrition, protective garments, and occupation. The information is presented to aid design engineers of space flight hardware and equipment.

  15. Measuring fire size in tunnels

    International Nuclear Information System (INIS)

    Guo, Xiaoping; Zhang, Qihui

    2013-01-01

    A new measure of fire size Q′ has been introduced in longitudinally ventilated tunnel as the ratio of flame height to the height of tunnel. The analysis in this article has shown that Q′ controls both the critical velocity and the maximum ceiling temperature in the tunnel. Before the fire flame reaches tunnel ceiling (Q′ 1.0), Fr approaches a constant value. This is also a well-known phenomenon in large tunnel fires. Tunnel ceiling temperature shows the opposite trend. Before the fire flame reaches the ceiling, it increases very slowly with the fire size. Once the flame has hit the ceiling of tunnel, temperature rises rapidly with Q′. The good agreement between the current prediction and three different sets of experimental data has demonstrated that the theory has correctly modelled the relation among the heat release rate of fire, ventilation flow and the height of tunnel. From design point of view, the theoretical maximum of critical velocity for a given tunnel can help to prevent oversized ventilation system. -- Highlights: • Fire sizing is an important safety measure in tunnel design. • New measure of fire size a function of HRR of fire, tunnel height and ventilation. • The measure can identify large and small fires. • The characteristics of different fire are consistent with observation in real fires

  16. Analysis of glass fibre sizing

    DEFF Research Database (Denmark)

    Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl

    2014-01-01

    . Soxhlet extraction was used to extract components of the sizing from the glass fibres. The glass fibres, their extracts and coated glass plates were analysed by Thermo-Gravimetric Analysis combined with a mass spectrometer (TGA-MS), and Attenuated Total Reflectance Fourier Transform Infrared (ATR...

  17. Cohort Size Effects and Migration.

    Science.gov (United States)

    Wilson, Franklin D.

    1983-01-01

    Explores whether changes in the size of cohorts entering the labor force affected the propensity within the U.S. labor force to migrate and socioeconomic circumstances of migrants at destination within 1965-76. Suggests that a significant reduction in the volume of migration among members of the baby boom cohort was the primary adjustment…

  18. Automated measurement of diatom size

    Science.gov (United States)

    Spaulding, Sarah A.; Jewson, David H.; Bixby, Rebecca J.; Nelson, Harry; McKnight, Diane M.

    2012-01-01

    Size analysis of diatom populations has not been widely considered, but it is a potentially powerful tool for understanding diatom life histories, population dynamics, and phylogenetic relationships. However, measuring cell dimensions on a light microscope is a time-consuming process. An alternative technique has been developed using digital flow cytometry on a FlowCAM® (Fluid Imaging Technologies) to capture hundreds, or even thousands, of images of a chosen taxon from a single sample in a matter of minutes. Up to 30 morphological measures may be quantified through post-processing of the high resolution images. We evaluated FlowCAM size measurements, comparing them against measurements from a light microscope. We found good agreement between measurement of apical cell length in species with elongated, straight valves, including small Achnanthidium minutissimum (11-21 µm) and largeDidymosphenia geminata (87–137 µm) forms. However, a taxon with curved cells, Hannaea baicalensis (37–96 µm), showed differences of ~ 4 µm between the two methods. Discrepancies appear to be influenced by the choice of feret or geodesic measurement for asymmetric cells. We describe the operating conditions necessary for analysis of size distributions and present suggestions for optimal instrument conditions for size analysis of diatom samples using the FlowCAM. The increased speed of data acquisition through use of imaging flow cytometers like the FlowCAM is an essential step for advancing studies of diatom populations.

  19. Size, productivity, and international banking

    NARCIS (Netherlands)

    Buch, Claudia M.; Koch, Catherine T.; Koetter, Michael

    2011-01-01

    Heterogeneity in size and productivity is central to models that explain which manufacturing firms expert. This study presents descriptive evidence on similar heterogeneity among international banks as financial services providers. A novel and detailed bank-level data set reveals the volume and mode

  20. Bank Size and Systemic Risk

    NARCIS (Netherlands)

    Pais, A.; Stork, P.A.

    2013-01-01

    The global financial crisis that started in mid-2007 illustrates the relevance of systemic risk. One key driver of the systemic instability that materialised in the crisis was the elevated level of stress in large banks. We use EVT to analyse the effect of size on banks' univariate and systemic risk

  1. Estimation of base of middle phalanx size using anatomical landmarks.

    Science.gov (United States)

    Janssen, Stein J; Teunis, Teun; ter Meulen, Dirk P; Hageman, Michiel G J S; Ring, David

    2014-08-01

    To determine whether there is a measurable and reproducible relationship between the articular surface size of the middle phalanx base and the size of the middle phalanx head and proximal phalanx length of the same finger. Size of the articular surface of the middle phalanx base, size of the middle phalanx head, and proximal phalanx length were measured in 84 lateral radiographs by 3 observers. The ratio of articular surface size of the middle phalanx base to the proximal phalanx length of the same finger was 0.17. The ratio of articular surface size of the middle phalanx base to the size of the middle phalanx head of the same finger was 1.34. The intraclass correlation (ICC) among 3 raters was 0.99 for proximal phalanx length and 0.88 for size of the middle phalanx head. Knowledge of this relationship and ratios allow for accurate estimation of the percentage of articular surface involvement in a fracture of the middle phalanx base. The ICC was highest for measuring proximal phalanx length, making it the most reliable measurement for estimation of the articular surface size. This quantitative estimate may be useful for clinical research and is applicable to patient care. Copyright © 2014 American Society for Surgery of the Hand. All rights reserved.

  2. ''FUR'' - one size suits all

    International Nuclear Information System (INIS)

    Rutland, M.; Que, L.; Hassan, I.M.

    2000-01-01

    This work used amalgamated data from previous projects in order to test the concept that when organ function is expressed in terms of tracer kinetics, the results are independent of patient size or gender. Dynamic gamma camera studies were analysed by measuring the rate of movement of tracers from the blood into various organs. These rates were expressed as a ''fractional uptake rate'' (FUR), which is the fraction of tracer in the blood taken up by the organ per unit time. As these values were small, it was convenient to express the FUR per million seconds. The FUR was calculated using the expression FUR = SLOPE (of Rutland-Patlak plot), multiplied by B(0) (the blood curve value back-extrapolated to time zero), and divided by the TOTAL amount of tracer injected. Data were used from adult patients between the ages of 20 and 49 years who had normal organ function. Organ/tracer groups studied were the skeletal uptake of 99m Tc-MDP, the renal uptake of 99m Tc-MAG3, the renal uptake of 99m Tc-MDP, the renal uptake of 99m Tc-DTPA, the hepatic uptake of 99m Tc-colloid, the splenic uptake of 99m Tc-colloid, and the hepatic uptake of 99m Tc-DISIDA. Each organ/tracer group was divided into three subgroups according to patient size (smallest, middle and largest), and also into subgroups according to gender. Comparison of these subgroups did not show any significant size- or gender-related differences in FUR values. It is concluded that for patients with normally functioning organs the FUR is independent of patient size or gender. Thus, the FUR is a valuable way of expressing organ function, particularly in patients with unusual or rapidly changing body size, such as children. (orig.)

  3. The effect of head size/shape, miscentering, and bowtie filter on peak patient tissue doses from modern brain perfusion 256-slice CT: How can we minimize the risk for deterministic effects?

    Energy Technology Data Exchange (ETDEWEB)

    Perisinakis, Kostas; Seimenis, Ioannis; Tzedakis, Antonis; Papadakis, Antonios E.; Damilakis, John [Department of Medical Physics, Faculty of Medicine, University of Crete, P.O. Box 2208, Heraklion 71003, Crete (Greece); Medical Diagnostic Center ' Ayios Therissos,' P.O. Box 28405, Nicosia 2033, Cyprus and Department of Medical Physics, Medical School, Democritus University of Thrace, Panepistimioupolis, Dragana 68100, Alexandroupolis (Greece); Department of Medical Physics, University Hospital of Heraklion, P.O. Box 1352, Heraklion 71110, Crete (Greece); Department of Medical Physics, Faculty of Medicine, University of Crete, P.O. Box 2208, Heraklion 71003, Crete (Greece)

    2013-01-15

    Purpose: To determine patient-specific absorbed peak doses to skin, eye lens, brain parenchyma, and cranial red bone marrow (RBM) of adult individuals subjected to low-dose brain perfusion CT studies on a 256-slice CT scanner, and investigate the effect of patient head size/shape, head position during the examination and bowtie filter used on peak tissue doses. Methods: The peak doses to eye lens, skin, brain, and RBM were measured in 106 individual-specific adult head phantoms subjected to the standard low-dose brain perfusion CT on a 256-slice CT scanner using a novel Monte Carlo simulation software dedicated for patient CT dosimetry. Peak tissue doses were compared to corresponding thresholds for induction of cataract, erythema, cerebrovascular disease, and depression of hematopoiesis, respectively. The effects of patient head size/shape, head position during acquisition and bowtie filter used on resulting peak patient tissue doses were investigated. The effect of eye-lens position in the scanned head region was also investigated. The effect of miscentering and use of narrow bowtie filter on image quality was assessed. Results: The mean peak doses to eye lens, skin, brain, and RBM were found to be 124, 120, 95, and 163 mGy, respectively. The effect of patient head size and shape on peak tissue doses was found to be minimal since maximum differences were less than 7%. Patient head miscentering and bowtie filter selection were found to have a considerable effect on peak tissue doses. The peak eye-lens dose saving achieved by elevating head by 4 cm with respect to isocenter and using a narrow wedge filter was found to approach 50%. When the eye lies outside of the primarily irradiated head region, the dose to eye lens was found to drop to less than 20% of the corresponding dose measured when the eye lens was located in the middle of the x-ray beam. Positioning head phantom off-isocenter by 4 cm and employing a narrow wedge filter results in a moderate reduction of

  4. The source of visual size adaptation.

    Science.gov (United States)

    Zeng, Hang; Kreutzer, Sylvia; Fink, Gereon R; Weidner, Ralph

    2017-12-01

    Size adaptation describes the tendency of the visual system to adjust neural responsiveness of size representations after prolonged exposure to particular stimulations. A larger (or smaller) adaptor stimulus influences the perceived size of a similar test stimulus shown subsequently. Size adaptation may emerge on various processing levels. Functional representations of the adaptor to which the upcoming stimulus is adapted may be coded early in the visual system mainly reflecting retinal size. Alternatively, size adaptation may involve higher order processes that take into account additional information such as an object's estimated distance from the observer, hence reflecting perceived size. The present study investigated whether size adaptation is based on the retinal or the perceived size of an adaptor stimulus. A stimulus' physical and perceived sizes were orthogonally varied using perceived depth via binocular disparity, employing polarized 3D glasses. Four different adaptors were used, which varied in physical size, perceived size, or both. Two pairs of adaptors which were identical in physical size did not cause significantly different adaptation effects although they elicited different perceived sizes which were sufficiently large to produce differential aftereffects when induced by stimuli that physically differed in size. In contrast, there was a significant aftereffect when adaptors differed in physical size but were matched in perceived size. Size adaptation was thus unaffected by perceived size and binocular disparity. Our data suggest that size adaptation emerges from neural stages where information from both eyes is still coded in separate channels without binocular interactions, such as the lateral geniculate nucleus.

  5. Size of quorum sensing communities

    DEFF Research Database (Denmark)

    Ferkinghoff-Borg, Jesper; Sams, Thomas

    2014-01-01

    Ensembles of bacteria are able to coordinate their phenotypic behavior in accordance with the size, density, and growth state of the ensemble. This is achieved through production and exchange of diffusible signal molecules in a cell–cell regulatory system termed quorum sensing. In the generic...... quorum sensor a positive feedback in the production of signal molecules defines the conditions at which the collective behavior switches on. In spite of its conceptual simplicity, a proper measure of biofilm colony ‘‘size’’ appears to be lacking. We establish that the cell density multiplied...... by a geometric factor which incorporates the boundary conditions constitutes an appropriate size measure. The geometric factor is the square of the radius for a spherical colony or a hemisphere attached to a reflecting surface. If surrounded by a rapidly exchanged medium, the geometric factor is divided by three...

  6. Monte Carlo study of the influence of energy spectra, mesh size, high Z element on dose and PVDR based on 1-D and 3-D heterogeneous mouse head phantom for Microbeam Radiation Therapy.

    Science.gov (United States)

    Lin, Hui; Jing, Jia; Xu, Liangfeng; Mao, Xiaoli

    2017-12-01

    To evaluate the influence of energy spectra, mesh sizes, high Z element on dose and PVDR in Microbeam Radiation Therapy (MRT) based on 1-D analogy-mouse-head-model (1-D MHM) and 3-D voxel-mouse-head-phantom (3-D VMHP) by Monte Carlo simulation. A Microbeam-Array-Source-Model was implemented into EGSnrc/DOSXYZnrc. The microbeam size is assumed to be 25μm, 50μm or 75μm in thickness and fixed 1mm in height with 200μmc-t-c. The influence of the energy spectra of ID17@ESRF and BMIT@CLS were investigated. The mesh size was optimized. PVDR in 1-D MHM and 3-D VMHP was compared with the homogeneous water phantom. The arc influence of 3-D VMHP filled with water (3-D VMHWP) was compared with the rectangle phantom. PVDR of the lower BMIT@CLS spectrum is 2.4times that of ID17@ESRF for lower valley dose. The optimized mesh is 5µm for 25µm, and 10µm for 50µm and 75µm microbeams with 200µmc-t-c. A 500μm skull layer could make PVDR difference up to 62.5% for 1-D MHM. However this influence is limited (influence is limited for the more depth (influence of 3-D heterogeneous media. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  7. Economic development and family size.

    Science.gov (United States)

    Rios, R J

    1991-01-01

    The demographic transition in Latin America has resulted in increased family size rather than the Western European model of reduced family size. In 1905, both fertility and mortality were high in Latin America, but mortality declined more rapidly in Latin America than in Europe. In 1905, the crude birth rate for 15 selected countries averaged 44/1000 population. Western fertility at a comparable transition point was much lower at 30/1000. Between 1905 and 1960, fertility declines were evident in Uruguay, Argentina, Cuba, and Chile. Between 1960 and 1985, fertility declines appeared in Costa Rica, Panama, Brazil, and Colombia. Fertility declines were smaller in the other Latin American countries. Crude birth rates declined markedly by 1985 but may overestimate fertility decline, which is more accurately measured by standardized birth rates. Fertility decline was evident in Argentina, Chile, and Costa Rica for standardized birth rates, survivorship ratio, and births surviving past the age of 15 years. Theoretically, families are expected to reduce family size when survivorship is assured; when mortality is 25%, only four children need be planned instead of six when mortality is 50%. A result of falling mortality is a cheaper cost of producing children, which may stimulate parents to raise bigger families. Western fertility decline has been attributed to mortality decline, urbanization, increased female labor force participation, rising wages, and more efficient contraception. Comparable economic development in Latin America has not resulted in large enough changes to encourage family size limitation. A table of fertility and economic indicators for selected countries in Latin America and Europe reflects the inverse relationship between income growth, urban growth, and growth in female educational status and fertility. The regression equation explains 60% of the variation in fertility rates among Latin American countries. Explanatory power increases to 75% when female

  8. Finite Size Scaling of Perceptron

    OpenAIRE

    Korutcheva, Elka; Tonchev, N.

    2000-01-01

    We study the first-order transition in the model of a simple perceptron with continuous weights and large, bit finite value of the inputs. Making the analogy with the usual finite-size physical systems, we calculate the shift and the rounding exponents near the transition point. In the case of a general perceptron with larger variety of inputs, the analysis only gives bounds for the exponents.

  9. Teen Sized Humanoid Robot: Archie

    Science.gov (United States)

    Baltes, Jacky; Byagowi, Ahmad; Anderson, John; Kopacek, Peter

    This paper describes our first teen sized humanoid robot Archie. This robot has been developed in conjunction with Prof. Kopacek’s lab from the Technical University of Vienna. Archie uses brushless motors and harmonic gears with a novel approach to position encoding. Based on our previous experience with small humanoid robots, we developed software to create, store, and play back motions as well as control methods which automatically balance the robot using feedback from an internal measurement unit (IMU).

  10. Tick size and stock returns

    Science.gov (United States)

    Onnela, Jukka-Pekka; Töyli, Juuso; Kaski, Kimmo

    2009-02-01

    Tick size is an important aspect of the micro-structural level organization of financial markets. It is the smallest institutionally allowed price increment, has a direct bearing on the bid-ask spread, influences the strategy of trading order placement in electronic markets, affects the price formation mechanism, and appears to be related to the long-term memory of volatility clustering. In this paper we investigate the impact of tick size on stock returns. We start with a simple simulation to demonstrate how continuous returns become distorted after confining the price to a discrete grid governed by the tick size. We then move on to a novel experimental set-up that combines decimalization pilot programs and cross-listed stocks in New York and Toronto. This allows us to observe a set of stocks traded simultaneously under two different ticks while holding all security-specific characteristics fixed. We then study the normality of the return distributions and carry out fits to the chosen distribution models. Our empirical findings are somewhat mixed and in some cases appear to challenge the simulation results.

  11. Egg components, egg size, and hatchling size in leatherback turtles.

    Science.gov (United States)

    Wallace, Bryan P; Sotherland, Paul R; Tomillo, Pilar Santidrian; Bouchard, Sarah S; Reina, Richard D; Spotila, James R; Paladino, Frank V

    2006-12-01

    Relationships between egg size, egg components, and neonate size have been investigated across a wide range of oviparous taxa. Differences in egg traits among taxa reflect not only phylogenetic differences, but also interactions between biotic (i.e., maternal resource allocation) and abiotic (i.e. nest environment conditions) factors. We examined relationships between egg mass, egg composition, and hatchling size in leatherback turtles (Dermochelys coriacea) because of the unique egg and reproductive characteristics of this species and of sea turtles in general. Albumen comprised 63.0%+/-2.8% (mean+/-S.D.) of egg mass and explained most of the variation in egg mass, whereas yolk comprised only 33.0%+/-2.7%. Additionally, leatherback albumen dry mass was approximately 16% of albumen wet mass. Whereas hatchling mass increased significantly with egg mass (n = 218 clutches), hatchling mass increased by only approximately 2 g for each 10 g increase in egg mass and was approximately 10-20 g greater than yolk mass. Taken together, our results indicate that albumen might play a particularly significant role in leatherback embryonic development, and that leatherback eggs are both capable of water uptake from the nest substrate and also possess a large reservoir of water in the albumen. Relationships between egg mass and egg components, such as variation in egg mass being largely explained by variation in albumen mass and egg mass containing a relatively high proportion of albumen solids, are more similar to bird eggs than to eggs of other non-avian reptiles. However, hatchling mass correlates more with yolk mass than with albumen mass, unlike patterns observed in bird eggs of similar composition.

  12. The economics of urban size.

    Science.gov (United States)

    Alonso, W

    1971-01-01

    An aggregative economic approach to the theory of city size is presented along with some empirical findings which suggest that even the largest cities have not yet reached excessive sizes from the point of view of growth and productivity. Urban magnitude is no simple 1 dimensional phenomenon. Modern urban centers are surrounded by very large, diffuse zonal boundaries, within which there are marked variations in the proportion of firms and people associated with that center, and in the intensity of the association. In sum, population does not constitute a conventional, countable set. In general, population will be considered as the basic magnitude and as a conventionally definable number. Most approaches to city size have emphasized the presumed diseconomy of urban scale and have sought to establish that population at which costs per capita are least, regarding this as optimal. It is argued here that both the logic and the factual basis of this approach are faulty. The argument of minimum costs is insufficient in its own terms. Such an objective is reasonable only if output per capita is constant, but it appears that output per capita is an increasing function of urban size. In that case, a more sensible objective of public policy would deal with the relation of outputs and inputs, rather than only with inputs. In every country for which evidence was found, local product per capita (or some index for it, such as income or wages) rises with urban size, and where comparable figures on cost are available, these rise far more slowly if at all. Although all of the data desirable are not available for any single country, the overall pattern is clear. Possibly the most surprising element in the data is the marked decline with increasing density in Social Overhead Captial Stocks (SOCS) per capita. This runs counter to common belief that the bigger the city the more infrastructure per capita is needed and may be the result of such effects as the greater linear quantities of

  13. Safety and efficacy of quartz head contact laser ablation for large prostates using 980-nm laser: a comparative prospective study against that for small- and medium-sized prostates.

    Science.gov (United States)

    Shaker, Hassan S; Saafan, Ahmed; Yassin, Mohammed M; Fawzy, Mohammed; Shoeb, Mohammed S

    2015-02-01

    To examine the safety and efficacy of quartz head laser ablation of the prostate (QLAP) in the treatment of large and huge prostates as compared with small- and medium-sized ones. Two hundred forty-two patients with lower urinary tract symptoms secondary to benign prostatic hypertrophy (BPH) were included in the study, of which 210 patients were evaluable. Patients were divided into 2 groups: group A: patients with BPH volume of Prostate Symptom Score, International Prostate Symptom Score quality of life, and uroflowmetry. Prostate size decreased by 47 ± 2% and 62.7 ± 2% at 6 months post operatively for groups A and B, respectively. QLAP demonstrated good efficacy and safety in treating large and huge BPH. It possessed no added risk as compared with small prostates. It can be a good alternative to open prostatectomy especially in patients with significant comorbidities. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Class size versus class composition

    DEFF Research Database (Denmark)

    Jones, Sam

    Raising schooling quality in low-income countries is a pressing challenge. Substantial research has considered the impact of cutting class sizes on skills acquisition. Considerably less attention has been given to the extent to which peer effects, which refer to class composition, also may affect...... outcomes. This study uses new microdata from East Africa, incorporating test score data for over 250,000 children, to compare the likely efficacy of these two types of interventions. Endogeneity bias is addressed via fixed effects and instrumental variables techniques. Although these may not fully mitigate...

  15. Size Estimates in Inverse Problems

    KAUST Repository

    Di Cristo, Michele

    2014-01-06

    Detection of inclusions or obstacles inside a body by boundary measurements is an inverse problems very useful in practical applications. When only finite numbers of measurements are available, we try to detect some information on the embedded object such as its size. In this talk we review some recent results on several inverse problems. The idea is to provide constructive upper and lower estimates of the area/volume of the unknown defect in terms of a quantity related to the work that can be expressed with the available boundary data.

  16. Municipal Size and Electoral Participation

    DEFF Research Database (Denmark)

    Mouritzen, Poul Erik; Rose, Lawrence; Denters, Bas

    The issue of the appropriate scale for local government has regularly appeared on the agenda of public sector reformers. In the empirical work devoted to this issue, the principal focus has been on the implications of size for efficiency in local service provision. Relatively less emphasis has been...... are based on a strategy whereby theoretical models are developed and investigated for several different indicators of local democracy in a successive, cumulative fashion using a ‘funnel of causality logic’. This paper reports on results concerning local electoral political participation. We conclude...

  17. On Size Biased Kumaraswamy Distribution

    Directory of Open Access Journals (Sweden)

    Dreamlee Sharma

    2016-08-01

    Full Text Available In this paper, we introduce and study the size-biased form of Kumaraswamy distribution. The Kumaraswamy distribution which has drawn considerable attention in hydrology and related areas was proposed by Kumarswamy. The new distribution is derived under sizebiased probability of sampling taking the weights as the variate values. Various distributional and characterizing properties of the model are studied. The methods of maximum likelihood and matching quantiles estimation are employed to estimate the parameters of the proposed model. Finally, we apply the proposed model to simulated and real data sets.

  18. A neutral model with fluctuating population size and its effective size.

    OpenAIRE

    Iizuka, Masaru; Tachida, Hidenori; Matsuda, Hirotsugu

    2002-01-01

    We consider a diffusion model with neutral alleles whose population size is fluctuating randomly. For this model, the effects of fluctuation of population size on the effective size are investigated. The effective size defined by the equilibrium average heterozygosity is larger than the harmonic mean of population size but smaller than the arithmetic mean of population size. To see explicitly the effects of fluctuation of population size on the effective size, we investigate a special case wh...

  19. A phylogenetic analysis of egg size, clutch size, spawning mode, adult body size, and latitude in reef fishes

    Science.gov (United States)

    Kasimatis, Katja; Riginos, Cynthia

    2016-06-01

    Theoretical treatments of egg size in fishes suggest that constraints on reproductive output should create trade-offs between the size and number of eggs produced per spawn. For marine reef fishes, the observation of distinct reproductive care strategies (demersal guarding, egg scattering, and pelagic spawning) has additionally prompted speculation that these strategies reflect alternative fitness optima with selection on egg size differing by reproductive mode and perhaps latitude. Here, we aggregate data from 278 reef fish species and test whether clutch size, reproductive care, adult body size, and latitudinal bands (i.e., tropical, subtropical, and temperate) predict egg size, using a statistically unified framework that accounts for phylogenetic correlations among traits. We find no inverse relationship between species egg size and clutch size, but rather that egg size differs by reproductive mode (mean volume for demersal eggs = 1.22 mm3, scattered eggs = 0.18 mm3, pelagic eggs = 0.52 mm3) and that clutch size is strongly correlated with adult body size. Larger eggs were found in temperate species compared with tropical species in both demersal guarders and pelagic spawners, but this difference was not strong when accounting for phylogenetic correlations, suggesting that differences in species composition underlies regional differences in egg size. In summary, demersal guarders are generally small fishes with small clutch sizes that produce large eggs. Pelagic spawners and egg scatterers are variable in adult and clutch size. Although pelagic spawned eggs are variable in size, those of scatterers are consistently small.

  20. Four equivalent lot-sizing models

    NARCIS (Netherlands)

    W. van den Heuvel (Wilco); A.P.M. Wagelmans (Albert)

    2007-01-01

    textabstractWe study the following lot-sizing models that recently appeared in the literature: a lot-sizing model with a remanufacturing option, a lot-sizing model with production time windows, and a lot-sizing model with cumulative capacities. We show the equivalence of these models with a

  1. A Primer on Basic Effect Size Concepts.

    Science.gov (United States)

    Elmore, Patricia B.; Rotou, Ourania

    The increased interest in reporting effect sizes means that it is necessary to consider what should be included in a primer on effect sizes. A review of papers on effect sizes and commonly repeated statistical analyses suggests that it is important to discuss effect sizes relative to bivariate correlation, t-tests, analysis of variance/covariance,…

  2. Class-Size Effects in Secondary School

    Science.gov (United States)

    Krassel, Karl Fritjof; Heinesen, Eskil

    2014-01-01

    We analyze class-size effects on academic achievement in secondary school in Denmark exploiting an institutional setting where pupils cannot predict class size prior to enrollment, and where post-enrollment responses aimed at affecting realized class size are unlikely. We identify class-size effects combining a regression discontinuity design with…

  3. 7 CFR 51.1402 - Size classification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.1402 Section 51.1402... STANDARDS) United States Standards for Grades of Pecans in the Shell 1 Size Classification § 51.1402 Size classification. Size of pecans may be specified in connection with the grade in accordance with one of the...

  4. 7 CFR 51.1903 - Size classification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.1903 Section 51.1903... STANDARDS) United States Consumer Standards for Fresh Tomatoes Size and Maturity Classification § 51.1903 Size classification. The following terms may be used for describing the size of the tomatoes in any lot...

  5. Sample Size Estimation: The Easy Way

    Science.gov (United States)

    Weller, Susan C.

    2015-01-01

    This article presents a simple approach to making quick sample size estimates for basic hypothesis tests. Although there are many sources available for estimating sample sizes, methods are not often integrated across statistical tests, levels of measurement of variables, or effect sizes. A few parameters are required to estimate sample sizes and…

  6. Viable tumor in salvage neck dissections in head and neck cancer : Relation with initial treatment, change of lymph node size and human papillomavirus

    NARCIS (Netherlands)

    van den Bovenkamp, Karlijn; Dorgelo, Bart; Noordhuis, Maartje G; van der Laan, Bernard F A M; van der Vegt, Bert; Bijl, Hendrik P; Roodenburg, Jan L; van Dijk, Boukje A C; Oosting, Sjoukje F; Schuuring, Ed M D; Langendijk, Johannes A; Halmos, Gyorgy B; Plaat, Boudewijn E C

    Objectives: To identify predictive factors for the presence of viable tumor and outcome in head and neck cancer patients who undergo therapeutic salvage neck dissections. Materials and Methods: Retrospective analysis of 76 salvage neck dissections after radiotherapy alone (n = 22), radiotherapy in

  7. The "child size medicines" concept

    DEFF Research Database (Denmark)

    Nsabagasani, Xavier; Okeng, Jasper Ogwal; Mbonye, Anthony

    2015-01-01

    Background In 2007, the World Health Organization (WHO) launched the ‘make medicines child size’ (MMCS) campaign by urging countries to prioritize procurement of medicines with appropriate strengths for children’s age and weight and, in child-friendly formulations of rectal and flexible oral solid...... of policy provisions for the MMCS recommendations. Results For most medicines for the selected diseases, appropriate strength for children’s age and weight was addressed especially in the EMHSLU 2012. However, policy documents neither referred to ‘child size medicines’ concept nor provided for flexible oral...... health policy documents reflected limited adherence to the MMCS recommendations. This and failure to use evidence based medicines may result into treatment failure and or death. A revision of the current policies and guidelines to better reflect ‘child size’, child appropriate and evidence based...

  8. Reducing costs by reducing size

    International Nuclear Information System (INIS)

    Hayns, M.R.; Shepherd, J.

    1991-01-01

    The present paper discusses briefly the many factors, including capital cost, which have to be taken into account in determining whether a series of power stations based on a small nuclear plant can be competitive with a series based on traditional large unit sizes giving the guaranteed level of supply. The 320 MWe UK/US Safe Integral Reactor is described as a good example of how the factors discussed can be beneficially incorporated into a design using proven technology. Finally it goes on to illustrate how the overall costs of a generating system can indeed by reduced by use of the 320 MWe Safe Integral Reactor rather than conventional units of around 1200 MWe. (author). 9 figs

  9. Medium-size nuclear plants

    International Nuclear Information System (INIS)

    Vogelweith, L.; Lavergne, J.C.; Martinot, G.; Weiss, A.

    1977-01-01

    CEA (TECHNICATOME) has developed a range of pressurized water reactors of the type ''CAS compact'' which are adapted to civil ship propulsion, or to electric power production, combined possibly with heat production, up to outputs equivalent to 125 MWe. Nuclear plants equipped with these reactors are suitable to medium-size electric networks. Among the possible realizations, two types of plants are mentioned as examples: 1) Floating electron-nuclear plants; and 2) Combined electric power and desalting plants. The report describes the design characteristics of the different parts of a 125 MWe unit floating electro-nuclear plant: nuclear steam system CAS 3 G, power generating plant, floating platform for the whole plant. The report gives attention to the different possibilities according to site conditions (the plant can be kept floating, in a natural or artificial basin, it can be put aground, ...) and to safety and environment factors. Such unit can be used in places where there is a growing demand in electric power and fresh water. The report describes how the reactor, the power generating plant and multiflash distillation units of an electric power-desalting plant can be combined: choice of the ratio water output/electric power output, thermal cycle combination, choice of the gain ratio, according to economic considerations, and to desired goal of water output. The report analyses also some technical options, such as: choice of the extraction point of steam used as heat supply of the desalting station (bleeding a condensation turbine, or recovering steam at the exhaust of a backpressure turbine), design making the system safe. Lastly, economic considerations are dealt with: combining the production of fresh water and electric power provides usually a much better energy balance and a lower cost for both products. Examples are given of some types of installations which combine medium-size reactors with fresh water stations yielding from 10000 to 120000 m 3 per day

  10. Preliminary characterization of glass fiber sizing

    Energy Technology Data Exchange (ETDEWEB)

    Noergaard Petersen, H.; Almdal, K. [Technical Univ. of Denmark. DTU Nanotech, Kgs. Lyngby (Denmark); Kusano, Y.; Broendsted, P. [Technical Univ. of Denmark. DTU Wind Energy, Risoe Campus, Roskilde (Denmark)

    2013-09-01

    Glass fiber surfaces are treated with sizing during manufacturing. Sizing consists of several components, including a film former and a silane coupling agent that is important for adhesion between glass fibers and a matrix. Although the sizing highly affects the composite interface and thus the strength of the composites, little is known about the structure and chemistry of the sizing. A part of sizing was extracted by soxhlet extraction. The fibers were subsequently burned and some fibers were merely burned for analysis of glass fiber and sizing. The results showed that the analyzed fibers had amounts of bonded and physisorbed sizing similar to what has been presented in literature. An estimated sizing thickness was found to be approximately 100 nm. It is indicated that an epoxy-resin containing film former and a polyethylene oxide lubricant are present, yet no silanes or other sizing components were identified in the extractant. (Author)

  11. Population Size and Structure of Melon-Headed Whales (Peponocephala Electra) Around the Main Hawaiian Islands: Evidence of Multiple Populations Based on Photographic Data

    Science.gov (United States)

    2010-05-14

    echolocation clicks at night, that foraging is predominantly occurring at night (Baumann- Pickering 2009). Although relatively few stomach contents have...Hawaiian Islands; one on O‘ahu (two animals in 2003) and one on Kaua‘i (150—200 animals in 2004). There are a number of theories as to why mass...headed whales around Hawai‘i. Photo-Identification and Mark-Recapture In simple terms, the theory of mark-recapture (or capture-recapture) is merely a

  12. Preliminary characterization of glass fiber sizing

    DEFF Research Database (Denmark)

    Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl

    2013-01-01

    the strength of the composites, little is known about the structure and chemistry of the sizing. A part of sizing was extracted by soxhlet extraction. The fibers were subsequently burned and some fibers were merely burned for analysis of glass fiber and sizing. The results showed that the analyzed fibers had......Glass fiber surfaces are treated with sizing during manufacturing. Sizing consists of several components, including a film former and a silane coupling agent that is important for adhesion between glass fibers and a matrix. Although the sizing highly affects the composite interface and thus...

  13. Critical Initial Flaw Size Analysis

    Science.gov (United States)

    Dawicke, David S.; Raju, Ivatury S.; Cheston, Derrick J.

    2008-01-01

    An independent assessment was conducted to determine the critical initial flaw size (CIFS) for the flange-to-skin weld in the Ares I-X Upper Stage Simulator (USS). The USS consists of several "tuna can" segments that are approximately 216 inches in diameter, 115 inches tall, and 0.5 inches thick. A 6 inch wide by 1 inch thick flange is welded to the skin and is used to fasten adjacent tuna cans. A schematic of a "tuna can" and the location of the flange-to-skin weld are shown in Figure 1. Gussets (shown in yellow in Figure 1) are welded to the skin and flange every 10 degrees around the circumference of the "tuna can". The flange-to-skin weld is a flux core butt weld with a fillet weld on the inside surface, as illustrated in Figure 2. The welding process may create loss of fusion defects in the weld that could develop into fatigue cracks and jeopardize the structural integrity of the Ares I-X vehicle. The CIFS analysis was conducted to determine the largest crack in the weld region that will not grow to failure within 4 lifetimes, as specified by NASA standard 5001 & 5019 [1].

  14. Sizing for ethnicity in multi-cultural societies: development of size ...

    African Journals Online (AJOL)

    ... years, and fell in the size 6/10 to size 14/38 size range. The findings of the study suggest that young South African women of African descent with a triangular body shape may experience loose fit in the upper body of garments sized according to the size specifications currently used in the South African apparel industry.

  15. The NGDC Seafloor Sediment Grain Size Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGDC (now NCEI) Seafloor Sediment Grain Size Database contains particle size data for over 17,000 seafloor samples worldwide. The file was begun by NGDC in 1976...

  16. The size of the labor wards

    DEFF Research Database (Denmark)

    Milland, Maria; Christoffersen, Jens; Hedegaard, Morten

    2013-01-01

    To assess possible associations between the size of labor units and the frequency of approved obstetric claims.......To assess possible associations between the size of labor units and the frequency of approved obstetric claims....

  17. Size Estimation with Night Vision Goggles

    National Research Council Canada - National Science Library

    Zalevski, Anna

    2001-01-01

    .... The results for unaided viewing were in accord with the law of size constancy that predicts that accurate size estimation is a result of observers taking into account the distance at which objects are located...

  18. Size determinations of colloidal fat emulsions

    DEFF Research Database (Denmark)

    Kuntsche, Judith; Klaus, Katrin; Steiniger, Frank

    2009-01-01

    Size and size distributions of colloidal dispersions are of crucial importance for their performance and safety. In the present study, commercially available fat emulsions (Lipofundin N, Lipofundin MCT and Lipidem) were analyzed by photon correlation spectroscopy, laser diffraction with adequate ...

  19. Population Genetics with Fluctuating Population Sizes

    OpenAIRE

    Chotibut, Thiparat; Nelson, David R.

    2016-01-01

    Standard neutral population genetics theory with a strictly fixed population size has important limitations. An alternative model that allows independently fluctuating population sizes and reproduces the standard neutral evolution is reviewed. We then study a situation such that the competing species are neutral at the equilibrium population size but population size fluctuations nevertheless favor fixation of one species over the other. In this case, a separation of timescales emerges natural...

  20. Prevention of the Portion Size Effect

    NARCIS (Netherlands)

    I. Versluis (Iris)

    2016-01-01

    markdownabstractAn increase in the portion size leads to an increase in energy intake, a phenomenon which is also referred to as the portion size effect. The increase in portion sizes in recent years is regarded as an important contributor to the increase in the prevalence of obesity. Hence, the aim

  1. School size effects: review and conceptual analysis

    NARCIS (Netherlands)

    Scheerens, Jaap; Hendriks, Maria A.; Luyten, Johannes W.; Luyten, Hans; Hendriks, Maria; Scheerens, Jaap

    2014-01-01

    In this chapter, a review of international review studies on school size effects is presented. Next, ingredients of a more contextualized and tentative causal mediation model of school size effects are discussed. The chapter is completed by a short overview of school size effects as found in

  2. Matters of fiber size and myonuclear domain

    DEFF Research Database (Denmark)

    Karlsen, Anders; Couppé, Christian; Andersen, Jesper L.

    2015-01-01

    INTRODUCTION: The relationship between fiber size and myonuclear content is understood poorly. METHODS: Biopsy cross-sections from young and old trained and untrained healthy individuals were analyzed for fiber area and myonuclei, and 2 fiber size-dependent cluster analyses were performed. RESULT......-based clusters in gaining mechanistic insight into the relationship between skeletal muscle fiber size and myonuclear content....

  3. Recent trends in particle size analysis techniques

    Science.gov (United States)

    Kang, S. H.

    1984-01-01

    Recent advances and developments in the particle-sizing technologies are briefly reviewed in accordance with three operating principles including particle size and shape descriptions. Significant trends of the particle size analysing equipment recently developed show that compact electronic circuitry and rapid data processing systems were mainly adopted in the instrument design. Some newly developed techniques characterizing the particulate system were also introduced.

  4. Is the myonuclear domain size fixed?

    NARCIS (Netherlands)

    van der Meer, S.F.T.; Jaspers, R. T.; Degens, H.

    2011-01-01

    It has been suggested that the number of myonuclei in a muscle fibre changes in proportion to the change in fibre size, resulting in a constant myonuclear domain size, defined as the cytoplasmic volume per myonucleus. The myonuclear domain size varies, however, between fibre types and is inversely

  5. Do Class Size Effects Differ across Grades?

    Science.gov (United States)

    Nandrup, Anne Brink

    2016-01-01

    This paper contributes to the class size literature by analysing whether short-run class size effects are constant across grade levels in compulsory school. Results are based on administrative data on all pupils enrolled in Danish public schools. Identification is based on a government-imposed class size cap that creates exogenous variation in…

  6. Effect Sizes in Gifted Education Research

    Science.gov (United States)

    Gentry, Marcia; Peters, Scott J.

    2009-01-01

    Recent calls for reporting and interpreting effect sizes have been numerous, with the 5th edition of the "Publication Manual of the American Psychological Association" (2001) calling for the inclusion of effect sizes to interpret quantitative findings. Many top journals have required that effect sizes accompany claims of statistical significance.…

  7. 7 CFR 51.2284 - Size classification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.2284 Section 51.2284... Size classification. The following classifications are provided to describe the size of any lot... shall conform to the requirements of the specified classification as defined below: (a) Halves. Lot...

  8. Genetic size and growth in goats

    NARCIS (Netherlands)

    Ogink, N.W.M.

    1993-01-01

    Since the last century, many biologists have studied the effects of size differences between species on the rate of their metabolic processes. in 1980, Taylor published the genetic size-scaling theory which incorporated the existing knowledge on size effects, and introduced two formal

  9. Fluid mechanics calculations in physics of droplets – IV: Head-on and off-center numerical collisions of unequal-size drops

    Directory of Open Access Journals (Sweden)

    Alejandro Acevedo-Malavé

    2016-09-01

    Full Text Available In this study, the finite volume method is employed to simulate the coalescence collision between water drops immersed in a continuous phase (n-heptane. For that purpose, it is chosen a range of values for the velocity of collisions for the finite volume calculations may yield different possible outcomes of the collision process. It can be seen for head-on collisions that when the velocity of collision is 0.2 m/s and 3.5 m/s, the little drop induces the formation of a hole in the bigger drop, until the surface tension forces to restore the circular form of the resulting drop. For a velocity of collision of 16.0 m/s, the little drop deforms the bigger one, and the system is converted into a thin ligament with the evolution of the dynamics. In this case, a little mass of n-heptane is trapped between the two drops, but at the end of the dynamics it drains to the continuous phase. For off-center collisions, two different values for the velocity of collisions were chosen, and the drops exhibit a lot of waves on the droplets’ surface. The streamlines are calculated for the process of coalescence of drops. These streamlines allow the understanding of the dynamics of the droplets immersed on the n-heptane phase. The effect of the interfacial tension it is showed due to the oscillations that the droplet exhibits. When the coalescence has begun, the streamlines form circular patterns at the zone of contact between the drops which explain the increment of the thickness of the bridge structure of the fluid between the two drops. At the end of the dynamics, when the velocity is of 0.2 m/s, the bigger drop reaches a circular form approximately, but when the velocity is of 3.5 m/s the drop reaches an elongated form.

  10. In Vivo Damage of the Head-Neck Junction in Hard-on-Hard Total Hip Replacements: Effect of Femoral Head Size, Metal Combination, and 12/14 Taper Design

    Directory of Open Access Journals (Sweden)

    Massimiliano Baleani

    2017-07-01

    Full Text Available Recently, concerns have been raised about the potential effect of head-neck junction damage products at the local and systemic levels. Factors that may affect this damage process have not been fully established yet. This study investigated the possible correlations among head-neck junction damage level, implant design, material combination, and patient characteristics. Head-neck junctions of 148 retrieved implants were analysed, including both ceramic-on-ceramic (N = 61 and metal-on-metal (N = 87 bearings. In all cases, the male taper was made of titanium alloy. Damage was evaluated using a four-point scoring system based on damage morphology and extension. Patient age at implantation, implantation time, damage risk factor, and serum ion concentration were considered as independent potential predicting variables. The damage risk factor summarises head-neck design characteristics and junction loading condition. Junction damage correlated with both implantation time and damage factor risk when the head was made of ceramic. A poor correlation was found when the head was made of cobalt alloy. The fretting-corrosion phenomenon seemed mainly mechanically regulated, at least when cobalt alloy components were not involved. When a component was made of cobalt alloy, the role of chemical phenomena increased, likely becoming, over implantation time, the damage driving phenomena of highly stressed junctions.

  11. Do class size effects differ across grades?

    DEFF Research Database (Denmark)

    Nandrup, Anne Brink

    This paper contributes to the class size literature by analyzing whether short-run class size effects are constant across grade levels in compulsory school. Results are based on administrative data on all pupils enroled in Danish public schools. Identification is based on a government-imposed class...... size cap that creates exogenous variation in class sizes. Significant (albeit modest) negative effects of class size increases are found for children on primary school levels. The effects on math abilities are statistically different across primary and secondary school. Larger classes do not affect...

  12. Foraminifera size evolution through the Phanerozoic (Invited)

    Science.gov (United States)

    Ingram, K.; Tachiki, N.; Cummins, R.; Jost, A. B.; Payne, J.

    2009-12-01

    In this research project we wanted to find out how the body size of Foraminifera, small unicellular protists which most frequently live in marine environments, changed through the Phanerozoic Eon (the past 543 million years). We measured maximum test length in 2,637 different Foraminifera genera catalogued by Loeblich and Tappan (1988), and used those data to determine how their body size has evolved. We learned that Foraminiferan size correlates closely with mass extinction and major ocean anoxic events, test composition does not correlate well with body size, and that Berner’s (2006) Phanerozoic atmospheric oxygen concentration curve strongly correlates with mean test size.

  13. Can selection on nest size from nest predation explain the latitudinal gradient in clutch size?

    Science.gov (United States)

    Biancucci, Luis; Martin, Thomas E

    2010-09-01

    1. Latitudinal variation in clutch sizes of birds is a well described, but poorly understood pattern. Many hypotheses have been proposed, but few have been experimentally tested, and none have been universally accepted by researchers. 2. The nest size hypothesis posits that higher nest predation in the tropics favours selection for smaller nests and thereby constrains clutch size by shrinking available space for eggs and/or nestlings in the nest. We tested this hypothesis with an experiment in a tropical forest and a comparative study between temperate and tropical field sites. 3. Specifically, we tested if: (i) predation increased with nest size; (ii) tropical birds had smaller nests controlled for body size; and (iii) clutch size was explained by nest size controlled for body size. 4. Experimental swapping of nests of different sizes showed that nest predation increased with nest size in the tropical site. Moreover, nest predation rates were higher in species with larger nests in both sites. However, nest size, corrected for body mass and phylogeny, did not differ between sites and was not related to clutch size between sites. 5. Hence, nest predation can exert selection on nest size as predicted by the hypothesis. Nest size increased with adult body mass, such that adult size might indirectly influence reproductive success through effects on nest size and nest predation risk. Ultimately, however, selection from nest predation on nest size does not explain the smaller clutch sizes typical of the tropics.

  14. Transform extension for block-based hybrid video codec with decoupling transform sizes from prediction sizes and coding sizes

    Science.gov (United States)

    Chen, Jing; Li, Ge; Fan, Kui; Guo, Xiaoqiang

    2017-09-01

    In the block-based hybrid video coding framework, transform is applied to the residual signal resulting from intra/inter prediction. Thus in the most of video codecs, transform block (TB) size is equal to the prediction block (PB) size. To further improve coding efficiency, recent video coding techniques have supported decoupling transform and prediction sizes. By splitting one prediction block into small transform blocks, the Residual Quad-tree (RQT) structure attempts to search the best transform size. However, in the current RQT, the transform size cannot be larger than the size of prediction block. In this paper, we introduce a transform extension method by decoupling transform sizes from prediction sizes and coding sizes. In addition to getting the transform block within the current PB partition, we combine multiple adjacent PBs to form a larger TB and select best block size accordingly. According to our experiment on top of the newest reference software (ITM17.0) of MPEG Internet Video Coding (IVC) standard, consistent coding performance gains are obtained.

  15. Visuomotor Dissociation in Cerebral Scaling of Size.

    Directory of Open Access Journals (Sweden)

    Adriaan R E Potgieser

    Full Text Available Estimating size and distance is crucial in effective visuomotor control. The concept of an internal coordinate system implies that visual and motor size parameters are scaled onto a common template. To dissociate perceptual and motor components in such scaling, we performed an fMRI experiment in which 16 right-handed subjects copied geometric figures while the result of drawing remained out of sight. Either the size of the example figure varied while maintaining a constant size of drawing (visual incongruity or the size of the examples remained constant while subjects were instructed to make changes in size (motor incongruity. These incongruent were compared to congruent conditions. Statistical Parametric Mapping (SPM8 revealed brain activations related to size incongruity in the dorsolateral prefrontal and inferior parietal cortex, pre-SMA / anterior cingulate and anterior insula, dominant in the right hemisphere. This pattern represented simultaneous use of a 'resized' virtual template and actual picture information requiring spatial working memory, early-stage attention shifting and inhibitory control. Activations were strongest in motor incongruity while right pre-dorsal premotor activation specifically occurred in this condition. Visual incongruity additionally relied on a ventral visual pathway. Left ventral premotor activation occurred in all variably sized drawing while constant visuomotor size, compared to congruent size variation, uniquely activated the lateral occipital cortex additional to superior parietal regions. These results highlight size as a fundamental parameter in both general hand movement and movement guided by objects perceived in the context of surrounding 3D space.

  16. Visuomotor Dissociation in Cerebral Scaling of Size.

    Science.gov (United States)

    Potgieser, Adriaan R E; de Jong, Bauke M

    2016-01-01

    Estimating size and distance is crucial in effective visuomotor control. The concept of an internal coordinate system implies that visual and motor size parameters are scaled onto a common template. To dissociate perceptual and motor components in such scaling, we performed an fMRI experiment in which 16 right-handed subjects copied geometric figures while the result of drawing remained out of sight. Either the size of the example figure varied while maintaining a constant size of drawing (visual incongruity) or the size of the examples remained constant while subjects were instructed to make changes in size (motor incongruity). These incongruent were compared to congruent conditions. Statistical Parametric Mapping (SPM8) revealed brain activations related to size incongruity in the dorsolateral prefrontal and inferior parietal cortex, pre-SMA / anterior cingulate and anterior insula, dominant in the right hemisphere. This pattern represented simultaneous use of a 'resized' virtual template and actual picture information requiring spatial working memory, early-stage attention shifting and inhibitory control. Activations were strongest in motor incongruity while right pre-dorsal premotor activation specifically occurred in this condition. Visual incongruity additionally relied on a ventral visual pathway. Left ventral premotor activation occurred in all variably sized drawing while constant visuomotor size, compared to congruent size variation, uniquely activated the lateral occipital cortex additional to superior parietal regions. These results highlight size as a fundamental parameter in both general hand movement and movement guided by objects perceived in the context of surrounding 3D space.

  17. Size structures sensory hierarchy in ocean life

    DEFF Research Database (Denmark)

    Martens, Erik Andreas; Wadhwa, Navish; Jacobsen, Nis Sand

    2015-01-01

    the use of remote sensing. In this study, we explore how sensing mode and range depend on body size. We reveal a hierarchy of sensing modes (chemosensing, mechanosensing, vision, hearing, and echolocation) where body size determines the available battery of sensing modes and where larger body size means...... a longer sensing range. The size-dependent hierarchy and the transitions between primary sensory modes are explained on the grounds of limiting factors set by physiology and the physical laws governing signal generation, transmission and reception. We characterize the governing mechanisms and theoretically...... predict the body size limits for various sensory modes, which align very well with size ranges found in literature. The treatise of all ocean life, from unicellular organisms to whales, demonstrates how body size determines available sensing modes, and thereby acts as a major structuring factor of aquatic...

  18. Size effects in manufacturing of metallic components

    DEFF Research Database (Denmark)

    Vollertsen, F; Biermann, D; Hansen, Hans Nørgaard

    2009-01-01

    In manufacturing of metallic components, the size of the part plays an important role for the process behaviour. This is due to so called size effects, which lead to changes in the process behaviour even if the relationship between the main geometrical features is kept constant. The aim of this p......In manufacturing of metallic components, the size of the part plays an important role for the process behaviour. This is due to so called size effects, which lead to changes in the process behaviour even if the relationship between the main geometrical features is kept constant. The aim...... of this paper is to give a systematic review on Such effects and their potential use or remedy. First, the typology of size effects will be explained, followed by a description of size effects on strength and tribology. The last three sections describe size effects on formability, forming processes and cutting...

  19. Body size evolution in insular speckled rattlesnakes (Viperidae: Crotalus mitchellii.

    Directory of Open Access Journals (Sweden)

    Jesse M Meik

    2010-03-01

    Full Text Available Speckled rattlesnakes (Crotalus mitchellii inhabit multiple islands off the coast of Baja California, Mexico. Two of the 14 known insular populations have been recognized as subspecies based primarily on body size divergence from putative mainland ancestral populations; however, a survey of body size variation from other islands occupied by these snakes has not been previously reported. We examined body size variation between island and mainland speckled rattlesnakes, and the relationship between body size and various island physical variables among 12 island populations. We also examined relative head size among giant, dwarfed, and mainland speckled rattlesnakes to determine whether allometric differences conformed to predictions of gape size (and indirectly body size evolving in response to shifts in prey size.Insular speckled rattlesnakes show considerable variation in body size when compared to mainland source subspecies. In addition to previously known instances of gigantism on Angel de la Guarda and dwarfism on El Muerto, various degrees of body size decrease have occurred frequently in this taxon, with dwarfed rattlesnakes occurring mostly on small, recently isolated, land-bridge islands. Regression models using the Akaike information criterion (AIC showed that mean SVL of insular populations was most strongly correlated with island area, suggesting the influence of selection for different body size optima for islands of different size. Allometric differences in head size of giant and dwarf rattlesnakes revealed patterns consistent with shifts to larger and smaller prey, respectively.Our data provide the first example of a clear relationship between body size and island area in a squamate reptile species; among vertebrates this pattern has been previously documented in few insular mammals. This finding suggests that selection for body size is influenced by changes in community dynamics that are related to graded differences in area over

  20. Sexual size dimorphism in the lizard Oplurus cuvieri cuvieri ...

    African Journals Online (AJOL)

    I suggest three proximate mechanisms that may cause sex-related differences in adult head size of O. c. cuvieri based on natural selection; to reduce intersexual food competition, sexual selection involving mate acquisition in males, and ontogenetic change of allometry to improve reproductive output in females. Key words: ...

  1. Experimental Study Using Functional Size Measurement in Building Estimation Models for Software Project Size

    NARCIS (Netherlands)

    Condori-Fernandez, Nelly; Daneva, Maia; Buglione, Luigi; Ormandjieva, Olga; Ormandjieva, O.; Constantinides, C.; Abran, A.; Lee, R.

    2010-01-01

    This paper reports on an experiment that investigates the predictability of software project size from software product size. The predictability research problem is analyzed at the stage of early requirements by accounting the size of functional requirements as well as the size of non-functional

  2. First Temperate Exoplanet Sized Up

    Science.gov (United States)

    2010-03-01

    Combining observations from the CoRoT satellite and the ESO HARPS instrument, astronomers have discovered the first "normal" exoplanet that can be studied in great detail. Designated Corot-9b, the planet regularly passes in front of a star similar to the Sun located 1500 light-years away from Earth towards the constellation of Serpens (the Snake). "This is a normal, temperate exoplanet just like dozens we already know, but this is the first whose properties we can study in depth," says Claire Moutou, who is part of the international team of 60 astronomers that made the discovery. "It is bound to become a Rosetta stone in exoplanet research." "Corot-9b is the first exoplanet that really does resemble planets in our solar system," adds lead author Hans Deeg. "It has the size of Jupiter and an orbit similar to that of Mercury." "Like our own giant planets, Jupiter and Saturn, the planet is mostly made of hydrogen and helium," says team member Tristan Guillot, "and it may contain up to 20 Earth masses of other elements, including water and rock at high temperatures and pressures." Corot-9b passes in front of its host star every 95 days, as seen from Earth [1]. This "transit" lasts for about 8 hours, and provides astronomers with much additional information on the planet. This is fortunate as the gas giant shares many features with the majority of exoplanets discovered so far [2]. "Our analysis has provided more information on Corot-9b than for other exoplanets of the same type," says co-author Didier Queloz. "It may open up a new field of research to understand the atmospheres of moderate- and low-temperature planets, and in particular a completely new window in our understanding of low-temperature chemistry." More than 400 exoplanets have been discovered so far, 70 of them through the transit method. Corot-9b is special in that its distance from its host star is about ten times larger than that of any planet previously discovered by this method. And unlike all such

  3. Strong crystal size effect on deformation twinning

    DEFF Research Database (Denmark)

    Yu, Qian; Shan, Zhi-Wei; Li, Ju

    2010-01-01

    find that the stress required for deformation twinning increases drastically with decreasing sample size of a titanium alloy single crystal7, 8, until the sample size is reduced to one micrometre, below which the deformation twinning is entirely replaced by less correlated, ordinary dislocation...... plasticity. Accompanying the transition in deformation mechanism, the maximum flow stress of the submicrometre-sized pillars was observed to saturate at a value close to titanium’s ideal strength9, 10. We develop a ‘stimulated slip’ model to explain the strong size dependence of deformation twinning....... The sample size in transition is relatively large and easily accessible in experiments, making our understanding of size dependence11, 12, 13, 14, 15, 16, 17 relevant for applications....

  4. Estimating Search Engine Index Size Variability

    DEFF Research Database (Denmark)

    Van den Bosch, Antal; Bogers, Toine; De Kunder, Maurice

    2016-01-01

    One of the determining factors of the quality of Web search engines is the size of their index. In addition to its influence on search result quality, the size of the indexed Web can also tell us something about which parts of the WWW are directly accessible to the everyday user. We propose a novel...... method of estimating the size of a Web search engine’s index by extrapolating from document frequencies of words observed in a large static corpus of Web pages. In addition, we provide a unique longitudinal perspective on the size of Google and Bing’s indices over a nine-year period, from March 2006...... until January 2015. We find that index size estimates of these two search engines tend to vary dramatically over time, with Google generally possessing a larger index than Bing. This result raises doubts about the reliability of previous one-off estimates of the size of the indexed Web. We find...

  5. A merchant ship size optimization model

    OpenAIRE

    Choi, Ki-Chul

    1983-01-01

    Approved for public release; distribution in unlimited. This paper analyzes how a shipowner or charterer may determine the specification of optimal ship size for a given route with respect to certain market requirements . The theory of optimal ship size, a methodology for estimating scale economics, and the various factors affecting ship size are examined using a typical conventional cargo ship and bulk cargo carriers based on shipowners ' cost data. http://archi...

  6. Relation of Body Size on Ecological Modes

    Science.gov (United States)

    Ivanov, A.; Ngo, A.; Heim, N.; Payne, J.

    2016-12-01

    Body size in the manner of total biovolume is a useful metric for determining the way an organism interacts with its environment. Body sizes of an organism determines behavior and its life mode, the way an organism lives and survives defined by motility, depth of habitat, and feeding mode. To build on that, we hypothesize that the body size of organisms determines the amount of unique life modes an organism is capable of utilizing. the We categorized the ecological life modes of marine organisms in the phyla Arthropoda, Mollusca, Chordata, and Brachiopoda. After organizing body sizes into bins of 10,000 mm3 per x-value through R, a trend displaying a decrease in the amount of unique life modes per body size bin is visible with increasing size. Chordates however do not display as consistent of a trend as do the rest of the phyla. We hypothesize that this could be because most chordates have a backbone allowing more variation in life modes and behaviors which in turn are capable sustain larger body sizes. A boxplot regarding the range of unique life modes for all body sizes for all phyla also shows that a majority of life mode ranges range from the median size organisms from data collected to the smallest. Which means that with all of the unique life modes that were taken into consideration, the possible body sizes they ranged into were mostly into smaller organisms as there was a majority in life modes that did not range into the realm of larger body size organisms that were greater than the median sizes of the organisms.

  7. Particle size distribution instrument. Topical report 13

    Energy Technology Data Exchange (ETDEWEB)

    Okhuysen, W.; Gassaway, J.D.

    1995-04-01

    The development of an instrument to measure the concentration of particles in gas is described in this report. An in situ instrument was designed and constructed which sizes individual particles and counts the number of occurrences for several size classes. Although this instrument was designed to detect the size distribution of slag and seed particles generated at an experimental coal-fired magnetohydrodynamic power facility, it can be used as a nonintrusive diagnostic tool for other hostile industrial processes involving the formation and growth of particulates. Two of the techniques developed are extensions of the widely used crossed beam velocimeter, providing simultaneous measurement of the size distribution and velocity of articles.

  8. Performance of population size on Knapsack problem

    Directory of Open Access Journals (Sweden)

    David Oyewola

    2016-12-01

    Full Text Available In this paper, an investigation of a performance of population size on the genetic algorithm (GA for a knapsack problem is considered. Population sizes between 10 and 200 chromosomes in the population are tested. In order to obtain meaningful information about the performance of the population size, a considerable number of independent runs of the GA are performed. Accurate model parameters values are obtained in reasonable computational time. Further increase of the population size, does not improve the solution accuracy. Moreover, the computational time is increased significantly.

  9. Determination of Flaw Size from Thermographic Data

    Science.gov (United States)

    Winfree, William P.; Howell, Patricia A.; Zalameda, Joseph N.

    2014-01-01

    Conventional methods for reducing the pulsed thermographic responses of delaminations tend to overestimate the size of the flaw. Since the heat diffuses in the plane parallel to the surface, the resulting temperature profile over the flaw is larger than the flaw. A variational method is presented for reducing the thermographic data to produce an estimated size for the flaw that is much closer to the true size of the flaw. The size is determined from the spatial thermal response of the exterior surface above the flaw and a constraint on the length of the contour surrounding the flaw. The technique is applied to experimental data acquired on a flat bottom hole composite specimen.

  10. Development of a new cluster size selector

    International Nuclear Information System (INIS)

    Ohwaki, Kiyoto; Dake, Yoshinori; Toyoda, Noriaki; Yamada, Isao

    2005-01-01

    A new cluster size selector is being developed to realize low-damage nano-processing applied gas cluster ion beam (GCIB) technology. The selector consists of several pairs of deflection electrodes and high-frequency deflection biases are applied. Depending on the velocity of a cluster ion, a desired size of cluster can pass through the selector. It can select any target cluster sizes without changing the structure. The length of this device is about 200 mm and it is much smaller than that of traditional mass spectrometers, because of its simple structure. Preliminary experiments showed a good mass resolution and high transmittance for a cluster size selector with this device

  11. ROSA-V/LSTF vessel top head LOCA tests SB-PV-07 and SB-PV-08 with break sizes of 1.0 and 0.1% and operator recovery actions for core cooling

    International Nuclear Information System (INIS)

    Suzuki, Mitsuhiro; Takeda, Takeshi; Nakamura, Hideo

    2010-02-01

    A series of break size parameter tests (SB-PV-07 and SB-PV-08) were conducted at the Large Scale Test Facility (LSTF) of ROSA-V Program by simulating a vessel top small break loss-of-coolant accident (SBLOCA) at a pressurized water reactor (PWR). Typical phenomena to the vessel top break LOCA and effectiveness of operator recovery actions on core cooling were studied under an assumption of total failure of high pressure injection (HPI) system. The LSTF simulates a 4-loop 3423 MWt PWR by a full-height, full-pressure and 1/48 volume scaling two-loop system. Typical phenomena of vessel top break LOCA are clarified for the cases with break sizes of 1.0 and 0.1% cold leg break equivalent. The results from a 0.5% top break LOCA test (SB-PV-02) in the early ROSA-IV Program was referred during discussion. Operator actions of HPI recovery in the 1.0% top break test and steam generator (SG) depressurization in the 0.1% top break test were initiated when temperature at core exit thermocouple (CET) reached 623 K during core boil-off. Both operator actions resulted in immediate recovery of core cooling. Based on the obtained data, several thermal-hydraulic phenomena were discussed further such as relations between vessel top head water level and steam discharge at the break, and between coolant mass inventory transient and core heat-up and quench behavior, and CET performances to detect core heat-up under influences of three-dimensional (3D) steam flows in the core and core exit. (author)

  12. Squamate hatchling size and the evolutionary causes of negative offspring size allometry.

    Science.gov (United States)

    Meiri, S; Feldman, A; Kratochvíl, L

    2015-02-01

    Although fecundity selection is ubiquitous, in an overwhelming majority of animal lineages, small species produce smaller number of offspring per clutch. In this context, egg, hatchling and neonate sizes are absolutely larger, but smaller relative to adult body size in larger species. The evolutionary causes of this widespread phenomenon are not fully explored. The negative offspring size allometry can result from processes limiting maximal egg/offspring size forcing larger species to produce relatively smaller offspring ('upper limit'), or from a limit on minimal egg/offspring size forcing smaller species to produce relatively larger offspring ('lower limit'). Several reptile lineages have invariant clutch sizes, where females always lay either one or two eggs per clutch. These lineages offer an interesting perspective on the general evolutionary forces driving negative offspring size allometry, because an important selective factor, fecundity selection in a single clutch, is eliminated here. Under the upper limit hypotheses, large offspring should be selected against in lineages with invariant clutch sizes as well, and these lineages should therefore exhibit the same, or shallower, offspring size allometry as lineages with variable clutch size. On the other hand, the lower limit hypotheses would allow lineages with invariant clutch sizes to have steeper offspring size allometries. Using an extensive data set on the hatchling and female sizes of > 1800 species of squamates, we document that negative offspring size allometry is widespread in lizards and snakes with variable clutch sizes and that some lineages with invariant clutch sizes have unusually steep offspring size allometries. These findings suggest that the negative offspring size allometry is driven by a constraint on minimal offspring size, which scales with a negative allometry. © 2014 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2014 European Society For Evolutionary

  13. Modelling the effect of size-asymmetric competition on size inequality

    DEFF Research Database (Denmark)

    Rasmussen, Camilla Ruø; Weiner, Jacob

    2017-01-01

    Abstract The concept of size asymmetry in resource competition among plants, in which larger individuals obtain a disproportionate share of contested resources, appears to be very straightforward, but the effects of size asymmetry on growth and size variation among individuals have proved...... to be controversial. It has often been assumed that competition among individual plants in a population has to be size-asymmetric to result in higher size inequality than in the absence of competition, but here we question this inference. Using very simple, individual-based models, we investigate how size symmetry...... of competition affects the development in size inequality between two competing plants and show that increased size inequality due to competition is not always strong evidence for size-asymmetric competition. Even absolute symmetric competition, in which all plants receive the same amount of resources...

  14. Interaction between carbon fibers and polymer sizing: Influence of fiber surface chemistry and sizing reactivity

    Science.gov (United States)

    Moosburger-Will, Judith; Bauer, Matthias; Laukmanis, Eva; Horny, Robert; Wetjen, Denise; Manske, Tamara; Schmidt-Stein, Felix; Töpker, Jochen; Horn, Siegfried

    2018-05-01

    Different aspects of the interaction of carbon fibers and epoxy-based polymer sizings are investigated, e.g. the wetting behavior, the strength of adhesion between fiber and sizing, and the thermal stability of the sizing layer. The influence of carbon fiber surface chemistry and sizing reactivity is investigated using fibers of different degree of anodic oxidation and sizings with different number of reactive epoxy groups per molecule. Wetting of the carbon fibers by the sizing dispersion is found to be specified by both, the degree of fiber activation and the sizing reactivity. In contrast, adhesion strength between fibers and sizing is dominated by the surface chemistry of the carbon fibers. Here, the number of surface oxygen groups seems to be the limiting factor. We also find that the sizing and the additional functionalities induced by anodic oxidation are removed by thermal treatment at 600 °C, leaving the carbon fiber in its original state after carbonization.

  15. 7 CFR 29.2549 - Size.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size. 29.2549 Section 29.2549 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing.... Size does not apply to tobacco in strip form. (See chart, § 29.2606.) [37 FR 13626, July 12, 1972...

  16. Birth Order, Family Size and Educational Attainment

    Science.gov (United States)

    de Haan, Monique

    2010-01-01

    This paper investigates the effect of family size and birth order on educational attainment. An instrumental variables approach is used to identify the effect of family size. Instruments for the number of children are twins at last birth and the sex mix of the first two children. The effect of birth order is identified, by examining the relation…

  17. Birth order, family size and educational attainment

    NARCIS (Netherlands)

    de Haan, M.

    2010-01-01

    This paper investigates the effect of family size and birth order on educational attainment. An instrumental variables approach is used to identify the effect of family size. Instruments for the number of children are twins at last birth and the sex mix of the first two children. The effect of birth

  18. Plasticity size effects in voided crystals

    DEFF Research Database (Denmark)

    Hussein, M. I.; Borg, Ulrik; Niordson, Christian Frithiof

    gradient plasticity formulations predict a negligible size effect under shear loading. By contrast, under equi-biaxial loading both plasticity formulations predict a strong size dependence with the flow strength scaling approximately inversely with the void-spacing. Excellent agreement is obtained between...

  19. Plasticity size effects in voided crystals

    DEFF Research Database (Denmark)

    Hussein, M.I.; Borg, Ulrik; Niordson, Christian Frithiof

    2008-01-01

    and strain gradient plasticity formulations predict a negligible size effect under shear loading. By contrast, under equi-biaxial loading both plasticity formulations predict a strong size dependence with the flow strength approximately scaling inversely with the void spacing. Excellent agreement is obtained...

  20. Seasonality, climate cycles and body size evolution.

    NARCIS (Netherlands)

    Troost, T.A.; van Dam, J.; Kooi, B.W.; Tuenter, E.

    2009-01-01

    The seasonality hypothesis states that climates characterized by large annual cycles select for large body sizes. In order to study the effects of seasonality on the evolution of body size, we use a model that is based on physiological rules and first principles. At the ecological time scale, our

  1. Visuomotor Dissociation in Cerebral Scaling of Size

    NARCIS (Netherlands)

    Potgieser, Adriaan R. E.; de Jong, Bauke M.

    2016-01-01

    Estimating size and distance is crucial in effective visuomotor control. The concept of an internal coordinate system implies that visual and motor size parameters are scaled onto a common template. To dissociate perceptual and motor components in such scaling, we performed an fMRI experiment in

  2. Particle sizes in slash fire smoke.

    Science.gov (United States)

    David V. Sandberg; Robert E. Martin

    1975-01-01

    Particulate emissions are the most objectionable atmospheric contaminant from forest burning. Little is known of the particulate sizes, and this research was done under laboratory conditions to obtain particle size information. Comments are made concerning techniques for future work in this field.

  3. Estimating software development project size, using probabilistic ...

    African Journals Online (AJOL)

    Probabilistic approach was used to estimate the software project size, using the data collected when we developed a tool to estimate the time to complete a new software project, and from The University of Calabar Computer Centre. The Expected size of the Tool was estimated to be 1.463 KSLOC, but when the tool was ...

  4. MICRON-SIZED POLYMER PARTICLES FROM TANZANIAN ...

    African Journals Online (AJOL)

    Micron sized polymeric particles were prepared from cashew nut shell liquid and subsequently functionalized to produce micron-sized carboxylated cation exchange resin (MCCER). By titrimetry and analytical procedures employing atomic absorption spectrometry, an assessment of the cation exchange capability of the ...

  5. Body size distribution of the dinosaurs.

    Directory of Open Access Journals (Sweden)

    Eoin J O'Gorman

    Full Text Available The distribution of species body size is critically important for determining resource use within a group or clade. It is widely known that non-avian dinosaurs were the largest creatures to roam the Earth. There is, however, little understanding of how maximum species body size was distributed among the dinosaurs. Do they share a similar distribution to modern day vertebrate groups in spite of their large size, or did they exhibit fundamentally different distributions due to unique evolutionary pressures and adaptations? Here, we address this question by comparing the distribution of maximum species body size for dinosaurs to an extensive set of extant and extinct vertebrate groups. We also examine the body size distribution of dinosaurs by various sub-groups, time periods and formations. We find that dinosaurs exhibit a strong skew towards larger species, in direct contrast to modern day vertebrates. This pattern is not solely an artefact of bias in the fossil record, as demonstrated by contrasting distributions in two major extinct groups and supports the hypothesis that dinosaurs exhibited a fundamentally different life history strategy to other terrestrial vertebrates. A disparity in the size distribution of the herbivorous Ornithischia and Sauropodomorpha and the largely carnivorous Theropoda suggests that this pattern may have been a product of a divergence in evolutionary strategies: herbivorous dinosaurs rapidly evolved large size to escape predation by carnivores and maximise digestive efficiency; carnivores had sufficient resources among juvenile dinosaurs and non-dinosaurian prey to achieve optimal success at smaller body size.

  6. The size effect in metal cutting

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    The size effect in metal cutting. 877. Figure 3. Variation of shear stress on shear plane when cutting. SAE 1112 steel (after Backer et al. 1952). Horizontal and vertical forces were measured for a number of depths of cut(t)when machining the same-sized surface as in grinding. The shear stress on the shear plane (τ) was ...

  7. Trajectory behaviour at different phonemic context sizes

    CSIR Research Space (South Africa)

    Badenhorst, J

    2011-11-01

    Full Text Available phonemic context sizes, but their model allows for an intuitive understanding of the impact of context size. They find that the most detailed models, predictably, match the coefficient tracks best - but when data scarcity forces them to use less detailed...

  8. Sintered-to-size FBR fuel

    International Nuclear Information System (INIS)

    Rasmussen, D.E.; Schaus, P.S.

    1984-04-01

    Fabrication of sintered-to-size PuO 2 -UO 2 fuel pellets was completed for testing of proposed FBR product specifications. Approximately 6000 pellets were fabricated to two nominal diameters and two densities by cold pressing and sintering to size. Process control and correlation between test and production batches are discussed

  9. The average size of ordered binary subgraphs

    NARCIS (Netherlands)

    van Leeuwen, J.; Hartel, Pieter H.

    To analyse the demands made on the garbage collector in a graph reduction system, the change in size of an average graph is studied when an arbitrary edge is removed. In ordered binary trees the average number of deleted nodes as a result of cutting a single edge is equal to the average size of a

  10. Body size distribution of the dinosaurs.

    Science.gov (United States)

    O'Gorman, Eoin J; Hone, David W E

    2012-01-01

    The distribution of species body size is critically important for determining resource use within a group or clade. It is widely known that non-avian dinosaurs were the largest creatures to roam the Earth. There is, however, little understanding of how maximum species body size was distributed among the dinosaurs. Do they share a similar distribution to modern day vertebrate groups in spite of their large size, or did they exhibit fundamentally different distributions due to unique evolutionary pressures and adaptations? Here, we address this question by comparing the distribution of maximum species body size for dinosaurs to an extensive set of extant and extinct vertebrate groups. We also examine the body size distribution of dinosaurs by various sub-groups, time periods and formations. We find that dinosaurs exhibit a strong skew towards larger species, in direct contrast to modern day vertebrates. This pattern is not solely an artefact of bias in the fossil record, as demonstrated by contrasting distributions in two major extinct groups and supports the hypothesis that dinosaurs exhibited a fundamentally different life history strategy to other terrestrial vertebrates. A disparity in the size distribution of the herbivorous Ornithischia and Sauropodomorpha and the largely carnivorous Theropoda suggests that this pattern may have been a product of a divergence in evolutionary strategies: herbivorous dinosaurs rapidly evolved large size to escape predation by carnivores and maximise digestive efficiency; carnivores had sufficient resources among juvenile dinosaurs and non-dinosaurian prey to achieve optimal success at smaller body size.

  11. Body Size Distribution of the Dinosaurs

    Science.gov (United States)

    O’Gorman, Eoin J.; Hone, David W. E.

    2012-01-01

    The distribution of species body size is critically important for determining resource use within a group or clade. It is widely known that non-avian dinosaurs were the largest creatures to roam the Earth. There is, however, little understanding of how maximum species body size was distributed among the dinosaurs. Do they share a similar distribution to modern day vertebrate groups in spite of their large size, or did they exhibit fundamentally different distributions due to unique evolutionary pressures and adaptations? Here, we address this question by comparing the distribution of maximum species body size for dinosaurs to an extensive set of extant and extinct vertebrate groups. We also examine the body size distribution of dinosaurs by various sub-groups, time periods and formations. We find that dinosaurs exhibit a strong skew towards larger species, in direct contrast to modern day vertebrates. This pattern is not solely an artefact of bias in the fossil record, as demonstrated by contrasting distributions in two major extinct groups and supports the hypothesis that dinosaurs exhibited a fundamentally different life history strategy to other terrestrial vertebrates. A disparity in the size distribution of the herbivorous Ornithischia and Sauropodomorpha and the largely carnivorous Theropoda suggests that this pattern may have been a product of a divergence in evolutionary strategies: herbivorous dinosaurs rapidly evolved large size to escape predation by carnivores and maximise digestive efficiency; carnivores had sufficient resources among juvenile dinosaurs and non-dinosaurian prey to achieve optimal success at smaller body size. PMID:23284818

  12. Adaptive density dependence of avian clutch size

    NARCIS (Netherlands)

    Both, C.; Tinbergen, J.M.; Visser, M.E.

    2000-01-01

    In birds, the annual mean clutch size is often negatively correlated with population density. This relationship is at least in part due to adjustment by individuals. We investigated whether this response is adaptive in two ways. First we used an optimality model to predict how optimal clutch size

  13. Size control in development: lessons from Drosophila

    Indian Academy of Sciences (India)

    animals are differences in size, but for some reason the zoologists have paid singularly little attention to them” (Haldane 1927). Almost three quarters of a century later, one of the most important and fundamental aspects of development – how the size of a multicellular organism is determined – remains as mysterious as ever ...

  14. Genome Size Dynamics and Evolution in Monocots

    Directory of Open Access Journals (Sweden)

    Ilia J. Leitch

    2010-01-01

    Full Text Available Monocot genomic diversity includes striking variation at many levels. This paper compares various genomic characters (e.g., range of chromosome numbers and ploidy levels, occurrence of endopolyploidy, GC content, chromosome packaging and organization, genome size between monocots and the remaining angiosperms to discern just how distinctive monocot genomes are. One of the most notable features of monocots is their wide range and diversity of genome sizes, including the species with the largest genome so far reported in plants. This genomic character is analysed in greater detail, within a phylogenetic context. By surveying available genome size and chromosome data it is apparent that different monocot orders follow distinctive modes of genome size and chromosome evolution. Further insights into genome size-evolution and dynamics were obtained using statistical modelling approaches to reconstruct the ancestral genome size at key nodes across the monocot phylogenetic tree. Such approaches reveal that while the ancestral genome size of all monocots was small (1C=1.9 pg, there have been several major increases and decreases during monocot evolution. In addition, notable increases in the rates of genome size-evolution were found in Asparagales and Poales compared with other monocot lineages.

  15. Board Size Effects in Closely Held Corporations

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Kongsted, H.C.; Meisner Nielsen, Kasper

    2004-01-01

    in simultanous equation analysis. In the present paper we reexaminethe causal relationship between board size and firm performance using adataset of more than 5,000 small and medium sized closely held corporationswith complete ownership information and detailed accounting data. We testthe potential endogeneity...

  16. Towards traceable size determination of extracellular vesicles

    NARCIS (Netherlands)

    Varga, Zoltán; Yuana, Yuana; Grootemaat, Anita E.; van der Pol, Edwin; Gollwitzer, Christian; Krumrey, Michael; Nieuwland, Rienk

    2014-01-01

    Extracellular vesicles (EVs) have clinical importance due to their roles in a wide range of biological processes. The detection and characterization of EVs are challenging because of their small size, low refractive index, and heterogeneity. In this manuscript, the size distribution of an

  17. TECHNICAL EQUIPMENT FOR SORTING APPLES BY SIZE

    Directory of Open Access Journals (Sweden)

    Vasilica Ştefan

    2012-01-01

    Full Text Available Need to increase the competitiveness of semi-subsistence farms, by valorisation of the fruits, led to research for designing of an equipment for sorting apples by size, in order to meet market requirement, pricing according to the size of the fruits.

  18. Estimating total population size for Songbirds

    Science.gov (United States)

    Jonathan Bart

    2005-01-01

    A conviction has developed during the past few years within the avian conservation community that estimates of total population size are needed for many species, especially ones that warrant conservation action. For example, the recently completed monitoring plans for North American shorebirds and landbirds establish estimating population size as a major objective....

  19. 7 CFR 51.1545 - Size.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... specified shall not be in conflict with the basic size requirements for the grade. (b) When size is...

  20. A sub-Mercury-sized exoplanet

    NARCIS (Netherlands)

    Barclay, T.; et al., [Unknown; Hekker, S.

    2013-01-01

    Since the discovery of the first exoplanets1, 2, it has been known that other planetary systems can look quite unlike our own3. Until fairly recently, we have been able to probe only the upper range of the planet size distribution4, 5, and, since last year, to detect planets that are the size of

  1. Spacesuit Soft Upper Torso Sizing Systems

    Science.gov (United States)

    Graziosi, David; Splawn, Keith

    2011-01-01

    The passive sizing system consists of a series of low-profile pulleys attached to the front and back of the shoulder bearings on a spacesuit soft upper torso (SUT), textile cord or stainless steel cable, and a modified commercial ratchet mechanism. The cord/cable is routed through the pulleys and attached to the ratchet mechanism mounted on the front of the spacesuit within reach of the suited subject. Upon actuating the ratchet mechanism, the shoulder bearing breadth is changed, providing variable upper torso sizing. The active system consists of a series of pressurizable nastic cells embedded into the fabric layers of a spacesuit SUT. These cells are integrated to the front and back of the SUT and are connected to an air source with a variable regulator. When inflated, the nastic cells provide a change in the overall shoulder bearing breadth of the spacesuit and thus, torso sizing. The research focused on the development of a high-performance sizing and actuation system. This technology has application as a suit-sizing mechanism to allow easier suit entry and more accurate suit fit with fewer torso sizes than the existing EMU (Extravehicular Mobility Unit) suit system. This advanced SUT will support NASA s Advanced EMU Evolutionary Concept of a two-sizes-fit-all upper torso for replacement of the current EMU hard upper torso (HUT). Both the passive and nastic sizing system approaches provide astronauts with real-time upper torso sizing, which translates into a more comfortable suit, providing enhanced fit resulting in improved crewmember performance during extravehicular activity. These systems will also benefit NASA by reducing flight logistics as well as overall suit system cost. The nastic sizing system approach provides additional structural redundancy over existing SUT designs by embedding additional coated fabric and uncoated fabric layers. Two sizing systems were selected to build into a prototype SUT: one active and one passive. From manned testing, it

  2. Genome size variation in the genus Avena.

    Science.gov (United States)

    Yan, Honghai; Martin, Sara L; Bekele, Wubishet A; Latta, Robert G; Diederichsen, Axel; Peng, Yuanying; Tinker, Nicholas A

    2016-03-01

    Genome size is an indicator of evolutionary distance and a metric for genome characterization. Here, we report accurate estimates of genome size in 99 accessions from 26 species of Avena. We demonstrate that the average genome size of C genome diploid species (2C = 10.26 pg) is 15% larger than that of A genome species (2C = 8.95 pg), and that this difference likely accounts for a progression of size among tetraploid species, where AB Avena have experienced genome downsizing in relation to their diploid progenitors. Genome size measurements could provide additional quality control for species identification in germplasm collections, especially in cases where diploid and polyploid species have similar morphology.

  3. Disruption effects on the beam size measurement

    International Nuclear Information System (INIS)

    Raimondi, P.; Decker, F.J.; Chen, P.

    1995-01-01

    At the SLC Final Focus with higher currents and smaller beam sizes, the disruption parameter D y is close to one and so the pinch effect should produce a luminosity enhancement. Since a flat beam-beam function is fit to deflection scan data to measure the beam size, disruption can affect the measurement. Here the authors discuss the quantitative effects of disruption for typical SLC beam parameters. With 3.5 10 10 particles per pulse, bunch length of 0.8 mm and beam sizes of 2.1 μm horizontally and 0.55 μm vertically, the measured vertical size can be as much as 25% bigger than the real one. Furthermore during the collision the spot size actually decrease, producing an enhancement factor H D of about 1.25. This would yield to a true luminosity which is 1.6 times that which is estimated from the beam-beam deflection fit

  4. Measuring wage effects of plant size

    DEFF Research Database (Denmark)

    Albæk, Karsten; Arai, Mahmood; Asplund, Rita

    1998-01-01

    distribution, comparable to the plant-size effects in other countries such as the U.S. with completely different institutions of wage setting. We also investigate the consequence of measurement error associated with the common practice of using midpoints of plant-size classes to estimate the plant size......There are large plant size–wage effects in the Nordic countries after taking into account individual and job characteristics as well as systematical sorting of the workers into various plant-sizes. The plant size–wage elasticities we obtain are, in contrast to other dimensions of the wage......–wage elasticity. Our results indicate that using size–class midpoints yields essentially the same results as using exact measures of plant size...

  5. Size of the Optic Nerve Head and Its Relationship with the Thickness of the Macular Ganglion Cell Complex and Peripapillary Retinal Nerve Fiber Layer in Patients with Primary Open Angle Glaucoma

    Directory of Open Access Journals (Sweden)

    Nobuko Enomoto

    2015-01-01

    Full Text Available Purpose. To evaluate the relationships among the optic nerve head (ONH area, macular ganglion cell complex (mGCC thickness, circumpapillary retinal nerve fiber layer (cpRNFL thickness, and visual field defects in patients with primary open angle glaucoma (POAG. Methods. This retrospective study included 90 eyes of 90 patients with POAG. The ONH area, rim area, mGCC thickness, and cpRNFL thickness were measured using optical coherence tomography. Mean deviation (MD was measured using standard automated perimetry. The relationships among clinical factors including age, refraction, the ONH area, the rim area, the mGCC thickness, the cpRNFL thickness, and MD were evaluated using correlation coefficients and multiple regression analyses. Results. The significant correlation of the ONH area with refraction (r=0.362, P<0.001, the mGCC thickness (r=0.225, P=0.033, and the cpRNFL thickness (r=0.253, P=0.016 was found. Multiple regression analysis showed that the ONH area, rim area, and MD were selected as significant contributing factors to explain the mGCC thickness and cpRNFL thickness. No factor was selected to explain MD. Conclusions. The ONH area, in other words, the disc size itself may affect the mGCC thickness and cpRNFL thickness in POAG patients.

  6. Publication Bias in Psychology: A Diagnosis Based on the Correlation between Effect Size and Sample Size

    Science.gov (United States)

    Kühberger, Anton; Fritz, Astrid; Scherndl, Thomas

    2014-01-01

    Background The p value obtained from a significance test provides no information about the magnitude or importance of the underlying phenomenon. Therefore, additional reporting of effect size is often recommended. Effect sizes are theoretically independent from sample size. Yet this may not hold true empirically: non-independence could indicate publication bias. Methods We investigate whether effect size is independent from sample size in psychological research. We randomly sampled 1,000 psychological articles from all areas of psychological research. We extracted p values, effect sizes, and sample sizes of all empirical papers, and calculated the correlation between effect size and sample size, and investigated the distribution of p values. Results We found a negative correlation of r = −.45 [95% CI: −.53; −.35] between effect size and sample size. In addition, we found an inordinately high number of p values just passing the boundary of significance. Additional data showed that neither implicit nor explicit power analysis could account for this pattern of findings. Conclusion The negative correlation between effect size and samples size, and the biased distribution of p values indicate pervasive publication bias in the entire field of psychology. PMID:25192357

  7. Evidence for the higher importance of signal size over body size in aposematic signaling in insects.

    Science.gov (United States)

    Remmel, Triinu; Tammarub, Toomas

    2011-01-01

    To understand the evolution of warning coloration, it is important to distinguish between different aspects of conspicuous color patterns. As an example, both pattern element size and body size of prey have been shown to enhance the effectiveness of warning signals. However, it is unclear whether the effect of body size is merely a side effect of proportionally increasing pattern elements, or if there is an effect of body size per se. These possibilities were evaluated by offering different sized artificial caterpillars with either fixed or proportionally increasing aposematic color signal elements to wild great tits, Parus major L. (Passeriformes: Paridae). The birds' hesitation time to attack each "caterpillar" was used as a measure of the warning effect. The hesitation time showed a significant, positive size-dependence with the caterpillars whose pattern elements increased proportionally with their body size. In contrast, no size dependence was found in the larvae with fixed-size signal elements. Such a difference in mortality curves is consistent with the idea that pattern element size is a more important aspect than body size in enhancing a warning signal. Since no evidence of an effect of body size per se on signal efficiency was found, this study does not support the hypothesis that aposematic insects gain more from large size than cryptic ones.

  8. Body Size, Fecundity, and Sexual Size Dimorphism in the Neotropical Cricket Macroanaxipha macilenta (Saussure) (Orthoptera: Gryllidae).

    Science.gov (United States)

    Cueva Del Castillo, R

    2015-04-01

    Body size is directly or indirectly correlated with fitness. Body size, which conveys maximal fitness, often differs between sexes. Sexual size dimorphism (SSD) evolves because body size tends to be related to reproductive success through different pathways in males and females. In general, female insects are larger than males, suggesting that natural selection for high female fecundity could be stronger than sexual selection in males. I assessed the role of body size and fecundity in SSD in the Neotropical cricket Macroanaxipha macilenta (Saussure). This species shows a SSD bias toward males. Females did not present a correlation between number of eggs and body size. Nonetheless, there were fluctuations in the number of eggs carried by females during the sampling period, and the size of females that were collected carrying eggs was larger than that of females collected with no eggs. Since mating induces vitellogenesis in some cricket species, differences in female body size might suggest male mate choice. Sexual selection in the body size of males of M. macilenta may possibly be stronger than the selection of female fecundity. Even so, no mating behavior was observed during the field observations, including audible male calling or courtship songs, yet males may produce ultrasonic calls due to their size. If female body size in M. macilenta is not directly related to fecundity, the lack of a correlated response to selection on female body size could represent an alternate evolutionary pathway in the evolution of body size and SSD in insects.

  9. Morphological rates of angiosperm seed size evolution.

    Science.gov (United States)

    Sims, Hallie J

    2013-05-01

    The evolution of seed size among angiosperms reflects their ecological diversification in a complex fitness landscape of life-history strategies. The lineages that have evolved seeds beyond the upper and lower boundaries that defined nonflowering seed plants since the Paleozoic are more dispersed across the angiosperm phylogeny than would be expected under a neutral model of phenotypic evolution. Morphological rates of seed size evolution estimated for 40 clades based on 17,375 species ranged from 0.001 (Garryales) to 0.207 (Malvales). Comparative phylogenetic analysis indicated that morphological rates are not associated with the clade's seed size but are negatively correlated with the clade's position in the overall distribution of angiosperm seed sizes; clades with seed sizes closer to the angiosperm mean had significantly higher morphological rates than clades with extremely small or extremely large seeds. Likewise, per-clade taxonomic diversification rates are not associated with the seed size of the clade but with where the clade falls within the angiosperm seed size distribution. These results suggest that evolutionary rates (morphological and taxonomic) are elevated in densely occupied regions of the seed morphospace relative to lineages whose ecophenotypic innovations have moved them toward the edges. © 2013 The Author(s). Evolution © 2013 The Society for the Study of Evolution.

  10. Optimum body size of Holstein replacement heifers.

    Science.gov (United States)

    Hoffman, P C

    1997-03-01

    Criteria that define optimum body size of replacement heifers are required by commercial dairy producers to evaluate replacement heifer management programs. Historically recommended body size criteria have been based on live BW measurements. Numerous research studies have observed a positive relationship between BW at first calving and first lactation milk yield, which has served as the impetus for using live BW to define body size of replacement heifers. Live BW is, however, not the only available measurement to define body size. Skeletal measurements such as wither height, length, and pelvic area have been demonstrated to be related to first lactation performance and (or) dystocia. Live BW measurements also do not define differences in body composition. Differences in body composition of replacement heifers at first calving are also related to key performance variables. An updated research data base is available for the modern Holstein genotype to incorporate measures of skeletal growth and body composition with BW when defining body size. These research projects also lend insight into the relative importance of measurements that define body size of replacement heifers. Incorporation of these measurements from current research into present BW recommendations should aid commercial dairy producers to better define replacement heifer growth and management practices. This article proposes enhancements in defining optimum body size and growth characteristics of Holstein replacement heifers.

  11. Size-Dictionary Interpolation for Robot's Adjustment

    Directory of Open Access Journals (Sweden)

    Morteza eDaneshmand

    2015-05-01

    Full Text Available This paper describes the classification and size-dictionary interpolation of the three-dimensional data obtained by a laser scanner to be used in a realistic virtual fitting room, where automatic activation of the chosen mannequin robot, while several mannequin robots of different genders and sizes are simultaneously connected to the same computer, is also considered to make it mimic the body shapes and sizes instantly. The classification process consists of two layers, dealing, respectively, with gender and size. The interpolation procedure tries to find out which set of the positions of the biologically-inspired actuators for activation of the mannequin robots could lead to the closest possible resemblance of the shape of the body of the person having been scanned, through linearly mapping the distances between the subsequent size-templates and the corresponding position set of the bioengineered actuators, and subsequently, calculating the control measures that could maintain the same distance proportions, where minimizing the Euclidean distance between the size-dictionary template vectors and that of the desired body sizes determines the mathematical description. In this research work, the experimental results of the implementation of the proposed method on Fits.me's mannequin robots are visually illustrated, and explanation of the remaining steps towards completion of the whole realistic online fitting package is provided.

  12. Fabrication and size control of Ag nanoparticles

    Directory of Open Access Journals (Sweden)

    M Farbod

    2012-06-01

    Full Text Available  The objective of this research was to fabricate Ag nanoparticles and control their sizes. Colloidal Ag nanoparticles with particle size of 30 nm were prepared by dissolving AgNO3 in ethanol and through the chemical reduction of Ag+ in alcohol solution. To control the nanoparticle size, different samples were fabricated by changing the AgNO3 and stabilizer concentrations and the effects of different factors on the shape and size of nanoparticles were investigated. The samples were characterized using SEM and EDX analysis. The results showed that by increasing the AgNO3 concentration, the average size of nanoparticles increases and nanoparticles lose their spherical shape. Also, we found that by using the stabilizer, it is possible to produce stable nanoparticles but increasing the stabilizer concentration caused an increase in size of nanoparticles. Fabrication of nanoparticles without using stabilizer was achieved but the results showed the nanoparticles size had a growth of 125 nm/h in the alcoholic media.

  13. Aggregate size distributions in sweep flocculation

    Directory of Open Access Journals (Sweden)

    Chairoj Rattanakawin

    2005-09-01

    Full Text Available The evolution of aggregate size distributions resulting from sweep flocculation has been investigated using laser light scattering technique. By measuring the (volume distributions of floc size, it is possible to distinguish clearly among floc formation, growth and breakage. Sweep flocculation of stable kaolin suspensions with ferric chloride under conditions of the rapid/slow mixing protocol produces uni-modal size distributions. The size distribution is shifted to larger floc size especially during the rapid mixing step. The variation of the distributions is also shown in the plot of cumulative percent finer against floc size. From this plot, the distributions maintain the same S-shape curves over the range of the mixing intensities/times studied. A parallel shift of the curves indicates that self-preserving size distribution occurred in this flocculation. It is suggested that some parameters from mathematical functions derived from the curves could be used to construct a model and predict the flocculating performance. These parameters will be useful for a water treatment process selection, design criteria, and process control strategies. Thus the use of these parameters should be employed in any further study.

  14. Exciton size and quantum transport in nanoplatelets

    Energy Technology Data Exchange (ETDEWEB)

    Pelzer, Kenley M., E-mail: kpelzer@anl.gov; Gray, Stephen K. [Center for Nanoscale Materials, Argonne National Laboratory, 9700 Cass Ave., Argonne, Illinois 60439 (United States); Darling, Seth B. [Center for Nanoscale Materials, Argonne National Laboratory, 9700 Cass Ave., Argonne, Illinois 60439 (United States); Institute for Molecular Engineering, University of Chicago, 5747 S. Ellis Ave., Chicago, Illinois 60637 (United States); Schaller, Richard D. [Center for Nanoscale Materials, Argonne National Laboratory, 9700 Cass Ave., Argonne, Illinois 60439 (United States); Department of Chemistry, Northwestern University, 2145 Sheridan Rd., Evanston, Illinois 60208 (United States)

    2015-12-14

    Two-dimensional nanoplatelets (NPLs) are an exciting class of materials with promising optical and energy transport properties. The possibility of efficient energy transport between nanoplatelets raises questions regarding the nature of energy transfer in these thin, laterally extended systems. A challenge in understanding exciton transport is the uncertainty regarding the size of the exciton. Depending on the material and defects in the nanoplatelet, an exciton could plausibly extend over an entire plate or localize to a small region. The variation in possible exciton sizes raises the question how exciton size impacts the efficiency of transport between nanoplatelet structures. Here, we explore this issue using a quantum master equation approach. This method goes beyond the assumptions of Förster theory to allow for quantum mechanical effects that could increase energy transfer efficiency. The model is extremely flexible in describing different systems, allowing us to test the effect of varying the spatial extent of the exciton. We first discuss qualitative aspects of the relationship between exciton size and transport and then conduct simulations of exciton transport between NPLs for a range of exciton sizes and environmental conditions. Our results reveal that exciton size has a strong effect on energy transfer efficiency and suggest that manipulation of exciton size may be useful in designing NPLs for energy transport.

  15. Seasonal body size reductions with warming covary with major body size gradients in arthropod species

    DEFF Research Database (Denmark)

    Horne, Curtis R.; Hirst, Andrew G.; Atkinson, David

    2017-01-01

    Major biological and biogeographical rules link body size variation with latitude or environmental temperature, and these rules are often studied in isolation. Within multivoltine species, seasonal temperature variation can cause substantial changes in adult body size, as subsequent generations...... forces aquatic species to exhibit greater plasticity in body size with temperature. Total percentage change in size over the annual cycle appears relatively constant with annual temperature range but varies between environments, such that the overall size reduction in aquatic-developing species (approx...... experience different developmental conditions. Yet, unlike other size patterns, these common seasonal temperature–size gradients have never been collectively analysed. We undertake the largest analysis to date of seasonal temperature-size gradients in multivoltine arthropods, including 102 aquatic...

  16. Fundamental science of nanometer-size clusters

    Energy Technology Data Exchange (ETDEWEB)

    Wilcoxon, J.P.; Newcomer, P.P.; Samara, G.A.; Venturini, E.L.; Williamson, R.L.

    1995-10-01

    This research has produced a variety of monodisperse, nanometer-size clusters (nanoclusters for short), characterized their size and crystal structure and developed a scientific understanding of the size dependence of their physical properties. Of specific interest were the influence of quantum electronic confinement on the optical properties, magnetic properties, and dielectric properties. These properties were chosen both for their potential practical impact on various applications identified in the National Critical Technologies list (e.g., catalysis, information storage, sensors, environmental remediation, ...) as well as for their importance to the fundamental science of clusters. An Executive Summary provides a description of the major highlights.

  17. Quantum mechanical size and steric hindrance.

    Science.gov (United States)

    Hollett, Joshua W; Kelly, Aaron; Poirier, Raymond A

    2006-12-28

    A quantum mechanical definition of molecular size and shape is formulated from the electronic second moment of the Hartree-Fock wave function. The shape tensor is defined to be invariant with respect to the origin. The geometric average of the eigenvalues of the tensor correlates very well with van der Waals and Bragg-Slater radii. There is also a close linear relationship between this definition of molecular size and molecular volumes determined computationally using isodensity contours. Furthermore, this definition of molecular size is effective in predicting the steric effects of substituents, as predicted by existing methods, such as the modified Taft Ee(s), P-values, and n-values.

  18. Size Effects on the Strength of Metals

    DEFF Research Database (Denmark)

    Huang, Xiaoxu

    2014-01-01

    The grain size effect and the specimen size effect on the strength of metals are briefly reviewed with respect to their history and current status of research. It is revealed that the fundamental strengthening mechanisms responsible for these two types of size effect are to increase the resistance...... to dislocation motion and to dislocation generation, respectively. It is shown that both strengthening mechanisms take place in some nanostructured metals, which leads to a suggestion to use these two mechanisms for optimizing the strength and ductility of nanostructured metals. This suggestion is verified...

  19. Basic Statistical Concepts for Sample Size Estimation

    Directory of Open Access Journals (Sweden)

    Vithal K Dhulkhed

    2008-01-01

    Full Text Available For grant proposals the investigator has to include an estimation of sample size .The size of the sample should be adequate enough so that there is sufficient data to reliably answer the research question being addressed by the study. At the very planning stage of the study the investigator has to involve the statistician. To have meaningful dialogue with the statistician every research worker should be familiar with the basic concepts of statistics. This paper is concerned with simple principles of sample size calculation. Concepts are explained based on logic rather than rigorous mathematical calculations to help him assimilate the fundamentals.

  20. Nanocoatings size effect in nanostructured films

    CERN Document Server

    Aliofkhazraei, Mahmood

    2014-01-01

    Size effect in structures has been taken into consideration over the last years. In comparison with coatings with micrometer-ranged thickness, nanostructured coatings usually enjoy better and appropriate properties, such as strength and resistance. These coatings enjoy unique magnetic properties and are used with the aim of producing surfaces resistant against erosion, lubricant system, cutting tools, manufacturing hardened sporadic alloys, being resistant against oxidation and corrosion. This book reviews researches on fabrication and classification of nanostructured coatings with focus on size effect in nanometric scale. Size effect on electrochemical, mechanical and physical properties of nanocoatings are presented.

  1. Economies of Size in Production Agriculture.

    Science.gov (United States)

    Duffy, Michael

    2009-07-01

    Economies of size refer to the ability of a farm to lower costs of production by increasing production. Agriculture production displays an L-shaped average cost curve where costs are lower initially but reach a point where no further gains are achieved. Spreading fixed costs, bulk purchases, and marketing power are cited as reasons for economies of size. Labor-reducing technologies may be the primary reason. Most studies do not include the external costs from prophylactic antibiotic use, impact on rural communities, and environmental damage associated with large-scale production. These can contribute to the economies of size.

  2. Thyroid Nodule Size at Ultrasound as a Predictor of Malignancy and Final Pathologic Size.

    Science.gov (United States)

    Cavallo, Allison; Johnson, Daniel N; White, Michael G; Siddiqui, Saaduddin; Antic, Tatjana; Mathew, Melvy; Grogan, Raymon H; Angelos, Peter; Kaplan, Edwin L; Cipriani, Nicole A

    2017-05-01

    Thyroid-related mortality has remained constant despite the increasing incidence of thyroid carcinoma. Most thyroid nodules are benign; therefore, ultrasound and fine needle aspiration (FNA) are integral in cancer screening. We hypothesize that increased nodule size at ultrasound does not predict malignancy and correlation between nodule size at ultrasound and pathologic exam is good. Resected thyroids with preoperative ultrasounds were identified. Nodule size at ultrasound, FNA diagnosis by Bethesda category, size at pathologic examination, and final histologic diagnosis were recorded. Nodule characteristics at ultrasound and FNA diagnoses were correlated with gross characteristics and histologic diagnoses. Nodules for which correlation could not be established were excluded. Of 1003 nodules from 659 patients, 26% were malignant. Nodules 6 cm). At ultrasound size cutoffs of 2, 3, 4, and 5 cm, smaller nodules had higher malignancy rates than larger nodules. Of the 455 not subject to FNA, 11% were malignant. Ultrasound size alone is a poor predictor of malignancy, but a relatively good predictor of final pathologic size (R 2  = 0.748), with less correlation at larger sizes. In nodules subject to FNA, false negative diagnoses were highest (6-8%) in nodules 3-6 cm, mostly due to encapsulated follicular variant of papillary carcinoma. Thyroid nodule size is inversely related to malignancy risk, as larger nodules have lower malignancy rates. However, the relationship of size to malignancy varies by FNA status. All nodules (regardless of FNA status) demonstrate a risk trough at ≥2 cm. Nodules subject to FNA show step-wise decline in malignancy rates by size, demonstrating that size alone should not be considered as an independent risk factor. Size at ultrasound shows relatively good correlation with final pathologic size. False negative rates are low in this series. Lesions with the appropriate constellation of clinical and radiographic findings should

  3. Portion size labeling and intended soft drink consumption : the impact of labeling format and size portfolio

    NARCIS (Netherlands)

    Vermeer, Willemijn M; Steenhuis, Ingrid H M; Leeuwis, Franca H; Bos, Arjan E R; de Boer, Michiel; Seidell, Jacob C

    2010-01-01

    OBJECTIVE: To assess what portion size labeling format is most promising in helping consumers selecting appropriate soft drink sizes, and whether labeling impact depends on the size portfolio. METHODS: An experimental study was conducted in fast-food restaurants in which 2 labeling formats (ie,

  4. Size distribution of mineral aerosol: using light-scattering models in laser particle sizing.

    NARCIS (Netherlands)

    Veihelmann, B.; Konert, M.; van der Zande, W.J.

    2006-01-01

    The size distribution of semitransparent irregularly shaped mineral dust aerosol samples is determined using a commonly used laser particle-sizing technique. The size distribution is derived from intensity measurements of singly scattered light at various scattering angles close to the

  5. Size distribution of mineral aerosol: using light-scattering models in laser particle sizing

    NARCIS (Netherlands)

    Veihelmann, B.; Konert, M.; Zande, W.J. van der

    2006-01-01

    The size distribution of semitransparent irregularly shaped mineral dust aerosol,samples is determined using a commonly used laser particle-sizing technique. The size distribution is derived from intensity measurements of singly scattered light at various scattering angles close to the

  6. Effects of Calibration Sample Size and Item Bank Size on Ability Estimation in Computerized Adaptive Testing

    Science.gov (United States)

    Sahin, Alper; Weiss, David J.

    2015-01-01

    This study aimed to investigate the effects of calibration sample size and item bank size on examinee ability estimation in computerized adaptive testing (CAT). For this purpose, a 500-item bank pre-calibrated using the three-parameter logistic model with 10,000 examinees was simulated. Calibration samples of varying sizes (150, 250, 350, 500,…

  7. Correlation between Leukocyte Numbers and Body Size of Rainbow Trout

    DEFF Research Database (Denmark)

    Mohammad, Rezkar Jaafar; Otani, Maki; Kania, Per Walter

    2016-01-01

    towards an antigen to be initiated even in fry. The number of leukocytes in individual fish at different developmental stages is likely to influence the capacity of the fish to respond simultaneously to several antigens (pathogens and vaccine components). This parameter may therefore be crucial for both...... - 780 g (group IV) were investigated. The number of lymphocytes was generally higher in head kidney compared to blood and spleen but they dominated in all samples (blood, head kidney and spleen) and their numbers increased exponentially with fish size. Percentages of lymphocytes in relation...

  8. Transparency of atom-sized superconducting junctions

    International Nuclear Information System (INIS)

    Van-der-Post, N.; Peters, E.T.; Van Ruitenbeek, J.M.; Yanson, I.K.

    1995-01-01

    We discuss the transparency of atom-size superconducting tunnel junctions by comparing experimental values of the normal resistance and Subgap Structure with the theoretical predictions for these phenomena by Landauer's formula and Multiple Andreev Reflection, respectively

  9. Droplet size in a rectangular Venturi scrubber

    Directory of Open Access Journals (Sweden)

    M. A. M. Costa

    2004-06-01

    Full Text Available The Venturi scrubber is a device which uses liquid in the form of droplets to efficiently remove fine particulate matter from gaseous streams. Droplet size is of fundamental importance for the scrubber performance. In the present experimental study, a laser diffraction technique was used in order to measure droplet size in situ in a Venturi scrubber with a rectangular cross section. Droplet size distribution was measured as a function of gas velocity (58.3 to 74.9 m/s, liquid-to-gas ratio (0.07 to 0.27 l/m³, and distance from liquid injection point (64 to 173 mm. It was found that all these variables significantly affect droplet size. The results were compared with the predictions from correlations found in the literature.

  10. Predicting incident size from limited information

    International Nuclear Information System (INIS)

    Englehardt, J.D.

    1995-01-01

    Predicting the size of low-probability, high-consequence natural disasters, industrial accidents, and pollutant releases is often difficult due to limitations in the availability of data on rare events and future circumstances. When incident data are available, they may be difficult to fit with a lognormal distribution. Two Bayesian probability distributions for inferring future incident-size probabilities from limited, indirect, and subjective information are proposed in this paper. The distributions are derived from Pareto distributions that are shown to fit data on different incident types and are justified theoretically. The derived distributions incorporate both inherent variability and uncertainty due to information limitations. Results were analyzed to determine the amount of data needed to predict incident-size probabilities in various situations. Information requirements for incident-size prediction using the methods were low, particularly when the population distribution had a thick tail. Use of the distributions to predict accumulated oil-spill consequences was demonstrated

  11. Papers on vehicle size : cars and trucks

    Science.gov (United States)

    1988-06-01

    The four papers in this volume describe analyses of car size : trends and truck occupant injuries and fatalities. All four were : written between June 1985 and December 1987. The topics : addressed include where heavy truck accidents occur, injury an...

  12. Size Matters, if you Control Your Junk

    DEFF Research Database (Denmark)

    Asness, Cliff; Frazzini, Andrea; Israel, Ronen

    The size premium has been challenged along many fronts: it has a weak historical record, varies significantly over time, in particular weakening after its discovery, is concentrated among microcap stocks, resides predominantly in January, is not present for non-price based measures of size, is weak...... internationally, and is argued to be subsumed by proxies for illiquidity. We find, however, that these challenges are systematically dismantled when controlling for the quality, or its inverse “junk”, of a firm. Across a wide variety of quality measures proposed in the literature a significant size premium...... emerges, which is: stable through time, robust to specification, more consistent across seasons and markets, not concentrated in microcaps, robust to non-price based measures of size, and not captured by an illiquidity premium. These results are replicated in 30 different industries and in 24 different...

  13. Safety in Cryogenics – Safety device sizing

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The calculation is separated in three operations: o The estimation of the loads arriving on the component to protect, o The calculation of the mass flow to evacuate, o And the sizing of the safety device.

  14. Dynamic code block size for JPEG 2000

    Science.gov (United States)

    Tsai, Ping-Sing; LeCornec, Yann

    2008-02-01

    Since the standardization of the JPEG 2000, it has found its way into many different applications such as DICOM (digital imaging and communication in medicine), satellite photography, military surveillance, digital cinema initiative, professional video cameras, and so on. The unified framework of the JPEG 2000 architecture makes practical high quality real-time compression possible even in video mode, i.e. motion JPEG 2000. In this paper, we present a study of the compression impact using dynamic code block size instead of fixed code block size as specified in the JPEG 2000 standard. The simulation results show that there is no significant impact on compression if dynamic code block sizes are used. In this study, we also unveil the advantages of using dynamic code block sizes.

  15. Genome sizes of forensically relevant Diptera.

    Science.gov (United States)

    Picard, C J; Johnston, J S; Tarone, A M

    2012-01-01

    Genome size estimates for both sexes of forensically relevant Diptera from 17 species (four families) are reported herein. Average genome sizes ranged from 425.8 Mb for female Chrysomya rufifacies to 1,197.4 Mb for male Haematobia irritans. These estimates are useful not only for molecular studies, but also for determination of the species and sex of immatures. Species in three of the sampled families had sexually dimorphic genome sizes, presenting a new tool useful for the determination of sex in these species, especially in the immature stages where sexes are morphologically difficult or impossible to identify. In addition, closely related species had significantly different genome sizes, suggesting the use of flow cytometry as a new tool for species identification of some species of forensically relevant larvae.

  16. Problem size, parallel architecture, and optimal speedup

    Science.gov (United States)

    Nicol, David M.; Willard, Frank H.

    1988-01-01

    The communication and synchronization overhead inherent in parallel processing can lead to situations where adding processors to the solution method actually increases execution time. Problem type, problem size, and architecture type all affect the optimal number of processors to employ. The numerical solution of an elliptic partial differential equation is examined in order to study the relationship between problem size and architecture. The equation's domain is discretized into n sup 2 grid points which are divided into partitions and mapped onto the individual processor memories. The relationships between grid size, stencil type, partitioning strategy, processor execution time, and communication network type are analytically quantified. In so doing, the optimal number of processors was determined to assign to the solution, and identified (1) the smallest grid size which fully benefits from using all available processors, (2) the leverage on performance given by increasing processor speed or communication network speed, and (3) the suitability of various architectures for large numerical problems.

  17. Presynaptic molecular determinants of quantal size

    Directory of Open Access Journals (Sweden)

    Shigeo eTakamori

    2016-02-01

    Full Text Available The quantal hypothesis for the release of neurotransmitters at the chemical synapse has gained wide acceptance since it was first worked out at the motor endplate in frog skeletal muscle in the 1950s. Considering the morphological identification of synaptic vesicles at the nerve terminals that appeared to be homogeneous in size, the hypothesis proposed that signal transduction at synapses is mediated by the release of neurotransmitters packed in synaptic vesicles that are individually uniform in size; the amount of transmitter in a synaptic vesicle is called a quantum. Although quantal size – the amplitude of the postsynaptic response elicited by the release of neurotransmitters from a single vesicle – clearly depends on the number and sensitivity of the postsynaptic receptors, accumulating evidence has also indicated that the amount of neurotransmitters stored in synaptic vesicles can be altered by various presynaptic factors. Here, I provide an overview of the concepts and underlying presynaptic molecular underpinnings that may regulate quantal size.

  18. Method for producing size selected particles

    Energy Technology Data Exchange (ETDEWEB)

    Krumdick, Gregory K.; Shin, Young Ho; Takeya, Kaname

    2016-09-20

    The invention provides a system for preparing specific sized particles, the system comprising a continuous stir tank reactor adapted to receive reactants; a centrifugal dispenser positioned downstream from the reactor and in fluid communication with the reactor; a particle separator positioned downstream of the dispenser; and a solution stream return conduit positioned between the separator and the reactor. Also provided is a method for preparing specific sized particles, the method comprising introducing reagent into a continuous stir reaction tank and allowing the reagents to react to produce product liquor containing particles; contacting the liquor particles with a centrifugal force for a time sufficient to generate particles of a predetermined size and morphology; and returning unused reagents and particles of a non-predetermined size to the tank.

  19. Shape and Size from the Mist

    DEFF Research Database (Denmark)

    Dahl, Anders Lindbjerg; Jørgensen, Thomas Martini; Gundu, Phanindra Narayan

    2010-01-01

    particles are behind or in front of the focus plane. In most applications only in-focus particles get analyzed, but this weakens the statistical basis and requires either particle sampling over longer time or results in uncertain predictions. We propose a new method for estimating the size and the shape...... with ground truth depth, shape and size information. The outcome of our approach is a reliable particle analysis obtained from shorter sampling time.......Process optimization often depends on the correct estimation of particle size, their shape and their concentration. In case of the backlight microscopic system, which we investigate here, particle images suffer from out-of-focus blur. This gives a bias towards overestimating the particle size when...

  20. Sample size in qualitative interview studies

    DEFF Research Database (Denmark)

    Malterud, Kirsti; Siersma, Volkert Dirk; Guassora, Ann Dorrit Kristiane

    2016-01-01

    Sample sizes must be ascertained in qualitative studies like in quantitative studies but not by the same means. The prevailing concept for sample size in qualitative studies is “saturation.” Saturation is closely tied to a specific methodology, and the term is inconsistently applied. We propose...... the concept “information power” to guide adequate sample size for qualitative studies. Information power indicates that the more information the sample holds, relevant for the actual study, the lower amount of participants is needed. We suggest that the size of a sample with sufficient information power...... depends on (a) the aim of the study, (b) sample specificity, (c) use of established theory, (d) quality of dialogue, and (e) analysis strategy. We present a model where these elements of information and their relevant dimensions are related to information power. Application of this model in the planning...

  1. Tsunami sediments and their grain size characteristics

    Science.gov (United States)

    Sulastya Putra, Purna

    2018-02-01

    Characteristics of tsunami deposits are very complex as the deposition by tsunami is very complex processes. The grain size characteristics of tsunami deposits are simply generalized no matter the local condition in which the deposition took place. The general characteristics are fining upward and landward, poor sorting, and the grain size distribution is not unimodal. Here I review the grain size characteristics of tsunami deposit in various environments: swale, coastal marsh and lagoon/lake. Review results show that although there are similar characters in some environments and cases, but in detail the characteristics in each environment can be distinguished; therefore, the tsunami deposit in each environment has its own characteristic. The local geological and geomorphological condition of the environment may greatly affect the grain size characteristics.

  2. Suspended sediment concentration and particle size distribution ...

    Indian Academy of Sciences (India)

    , zinc and nickel) transported in ... Suspended sediment concentration; heavy metal concentration; regression model; particle size distribution;. Kojour watershed; Iran. ..... contaminants in a uranium mine pite–Lake; Water Res. 39 3055–3061.

  3. Pristipomoides filamentosus Size at Maturity Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains information used to help determine median size at 50% maturity for the bottomfish species, Pristipomoides filamentosus in the Main Hawaiian...

  4. Quark bag coupling to finite size pions

    International Nuclear Information System (INIS)

    De Kam, J.; Pirner, H.J.

    1982-01-01

    A standard approximation in theories of quark bags coupled to a pion field is to treat the pion as an elementary field ignoring its substructure and finite size. A difficulty associated with these treatments in the lack of stability of the quark bag due to the rapid increase of the pion pressure on the bad as the bag size diminishes. We investigate the effects of the finite size of the qanti q pion on the pion quark bag coupling by means of a simple nonlocal pion quark interaction. With this amendment the pion pressure on the bag vanishes if the bag size goes to zero. No stability problems are encountered in this description. Furthermore, for extended pions, no longer a maximum is set to the bag parameter B. Therefore 'little bag' solutions may be found provided that B is large enough. We also discuss the possibility of a second minimum in the bag energy function. (orig.)

  5. Unimodal tree size distributions possibly result from relatively strong conservatism in intermediate size classes.

    Directory of Open Access Journals (Sweden)

    Yue Bin

    Full Text Available Tree size distributions have long been of interest to ecologists and foresters because they reflect fundamental demographic processes. Previous studies have assumed that size distributions are often associated with population trends or with the degree of shade tolerance. We tested these associations for 31 tree species in a 20 ha plot in a Dinghushan south subtropical forest in China. These species varied widely in growth form and shade-tolerance. We used 2005 and 2010 census data from that plot. We found that 23 species had reversed J shaped size distributions, and eight species had unimodal size distributions in 2005. On average, modal species had lower recruitment rates than reversed J species, while showing no significant difference in mortality rates, per capita population growth rates or shade-tolerance. We compared the observed size distributions with the equilibrium distributions projected from observed size-dependent growth and mortality. We found that observed distributions generally had the same shape as predicted equilibrium distributions in both unimodal and reversed J species, but there were statistically significant, important quantitative differences between observed and projected equilibrium size distributions in most species, suggesting that these populations are not at equilibrium and that this forest is changing over time. Almost all modal species had U-shaped size-dependent mortality and/or growth functions, with turning points of both mortality and growth at intermediate size classes close to the peak in the size distribution. These results show that modal size distributions do not necessarily indicate either population decline or shade-intolerance. Instead, the modal species in our study were characterized by a life history strategy of relatively strong conservatism in an intermediate size class, leading to very low growth and mortality in that size class, and thus to a peak in the size distribution at intermediate sizes.

  6. Weighing In--Healthy at Any Size?

    Science.gov (United States)

    Jackson, Camille

    2012-01-01

    It's easy for overweight children to feel singled out and shamed about their body size, at home and at school. Experts say children can easily interpret even the well-intentioned "war on childhood obesity," meant to promote health, to mean a war on their bodies and on them. Size-based stigma stems in large part from the myth that being fat is a…

  7. Nuclear sizes and the isotope shift

    OpenAIRE

    Friar, J. L.; Martorell Domenech, Juan; Sprung, Donald W. L.

    1997-01-01

    Darwin-Foldy nuclear-size corrections in electronic atoms and nuclear radii are discussed from the nuclear-physics perspective. The interpretation of precise isotope-shift measurements is formalism dependent, and care must be exercised in interpreting these results and those obtained from relativistic electron scattering from nuclei. We strongly advocate that the entire nuclear-charge operator be used in calculating nuclear-size corrections in atoms rather than relegating portions of it to th...

  8. Contribution of growth phases to adult size.

    Science.gov (United States)

    Sheehy, A; Gasser, T; Molinari, L; Largo, R H

    2000-01-01

    Based on the data of the First Zurich Longitudinal Growth Study we investigate how interindividual differences in adult size arise in the variables leg height, sitting height and standing height, arm length, bi-iliac width and bihumeral width. Specifically, we are also interested in the question of whether across sexes and variables the same growth phases and the same parameters are predictive for achieving a certain adult size. A rather complex pattern emerges, demonstrating that regulation of growth is not the same for boys and girls and moreover is not the same for the six anthropometric variables studied. Prepubertal growth is characterized by its intensity (average velocity) and by its duration. Whereas duration has by itself no appreciable influence on adult size, prepubertal intensity determines adult size to a high degree across all variables and both sexes. The intensity of prepubertal growth determines adult size to a larger degree for boys than for girls. For a given size at the end of the prepubertal period, a small duration enhances the chance of obtaining a large adult size. Compared with prepubertal growth, the amount of variance of adult size explained is small for pubertal parameters, and--with respect to linear measures--significant for girls only. A small duration of prepubertal growth is in the following mainly compensated by a stronger pubertal spurt (PS), to a varying degree across variables. The overall picture which emerges indicates that sitting height--and to a lesser extent bihumeral width--develop in a more irregular fashion than the variables bi-iliac width and leg height.

  9. Measuring wage effects of plant size

    DEFF Research Database (Denmark)

    Albæk, Karsten; Arai, Mahmood; Asplund, Rita

    1998-01-01

    There are large plant size–wage effects in the Nordic countries after taking into account individual and job characteristics as well as systematical sorting of the workers into various plant-sizes. The plant size–wage elasticities we obtain are, in contrast to other dimensions of the wage distrib......–wage elasticity. Our results indicate that using size–class midpoints yields essentially the same results as using exact measures of plant size...

  10. On the size of sports fields

    International Nuclear Information System (INIS)

    Texier, Baptiste Darbois; Cohen, Caroline; Clanet, Christophe; Dupeux, Guillaume; Quéré, David

    2014-01-01

    The size of sports fields considerably varies from a few meters for table tennis to hundreds of meters for golf. We first show that this size is mainly fixed by the range of the projectile, that is, by the aerodynamic properties of the ball (mass, surface, drag coefficient) and its maximal velocity in the game. This allows us to propose general classifications for sports played with a ball. (paper)

  11. Determination of cluster size of Pratylenchus Penetrans ...

    African Journals Online (AJOL)

    A nursery field 21 m x 80 m was sampled sequentially for Pratylenchus penetrans by decreasing the plot sizes systematically. Plots sizes of 3.6 m x 8 m, 3.6 m x 3.6 m and 0.6 m x 0.6 m were sampled. Nematode counts were computed to obtain the respective sample mean and variance. The sample mean and variance ...

  12. Towards traceable size determination of extracellular vesicles

    OpenAIRE

    Varga, Zoltán; Yuana, Yuana; Grootemaat, Anita E.; van der Pol, Edwin; Gollwitzer, Christian; Krumrey, Michael; Nieuwland, Rienk

    2014-01-01

    Background: Extracellular vesicles (EVs) have clinical importance due to their roles in a wide range of biological processes. The detection and characterization of EVs are challenging because of their small size, low refractive index, and heterogeneity.Methods: In this manuscript, the size distribution of an erythrocyte-derived EV sample is determined using state-of-the-art techniques such as nanoparticle tracking analysis, resistive pulse sensing, and electron microscopy, and novel technique...

  13. The Size and Structure of Government

    OpenAIRE

    Michael, Bryane; Popov, Maja

    2015-01-01

    Does government size and structure adapt to changes in government’s organisational environment (particularly to uncertainty and complexity) as predicted by organisational theory? We find – using a range of statistical analyses – support for each of the major theories of organisation adaptation (the contingency-based view, resource-based view, and rational choice view). We find that both government size and structure change – holding other factors constant – for changes in the uncertaint...

  14. On the size of sports fields

    Science.gov (United States)

    Darbois Texier, Baptiste; Cohen, Caroline; Dupeux, Guillaume; Quéré, David; Clanet, Christophe

    2014-03-01

    The size of sports fields considerably varies from a few meters for table tennis to hundreds of meters for golf. We first show that this size is mainly fixed by the range of the projectile, that is, by the aerodynamic properties of the ball (mass, surface, drag coefficient) and its maximal velocity in the game. This allows us to propose general classifications for sports played with a ball.

  15. Relative cheek-tooth size in Australopithecus.

    Science.gov (United States)

    McHenry, H M

    1984-07-01

    Until the discovery of Australopithecus afarensis, cheek-tooth megadontia was unequivocally one of the defining characteristics of the australopithecine grade in human evolution along with bipedalism and small brains. This species, however, has an average postcanine area of 757 mm2, which is more like Homo habilis (759 mm2) than A. africanus (856 mm2). But what is its relative cheek-tooth size in comparison to body size? One approach to this question is to compare postcanine tooth area to estimated body weight. By this method all Australopithecus species are megadont: they have cheek teeth 1.7 to 2.3 times larger than modern hominoids of similar body size. The series from A. afarensis to A. africanus to A. robustus to A. boisei shows strong positive allometry indicating increasing megadontia through time. The series from H. habilis to H. erectus to H. sapiens shows strong negative allometry which implies a sharp reduction in the relative size of the posterior teeth. Postcanine megadontia in Australopithecus species can also be demonstrated by comparing tooth size and body size in associated skeletons: A. afarensis (represented by A.L. 288-1) has a cheek-tooth size 2.8 times larger than expected from modern hominoids; A. africanus (Sts 7) and A. robustus (TM 1517) are over twice the expected size. The evolutionary transition from the megadont condition of Australopithecus to the trend of decreasing megadontia seen in the Homo lineage may have occurred between 3.0 and 2.5 m.y. from A. afarensis to H.habilis but other evidence indicates that it is more likely to have occurred between 2.5 to 2.0 m.y. from an A. africanus-like form to H. habilis.

  16. Controlling nanopore size, shape and stability

    International Nuclear Information System (INIS)

    Van den Hout, Michiel; Hall, Adam R; Wu Mengyue; Zandbergen, Henny W; Dekker, Cees; Dekker, Nynke H

    2010-01-01

    Solid-state nanopores are considered a promising tool for the study of biological polymers such as DNA and RNA, due largely to their flexibility in size, potential in device integration and robustness. Here, we show that the precise shape of small nanopores (∼5 nm diameter in 20 nm SiN membranes) can be controlled by using transmission electron microscope (TEM) beams of different sizes. However, when some of these small nanopores are immersed in an aqueous solution, their resistance is observed to decrease over time. By comparing nanopores of different shapes using (scanning) TEM both before and after immersion in aqueous solution, we demonstrate that the stability of small nanopores is related to their three-dimensional geometry, which depends on the TEM beam size employed during pore fabrication. Optimal stability is obtained using a TEM beam size of approximately the same size as the intended nanopore diameter. In addition, we show that thermal oxidation can serve as a means to independently control nanopore size following TEM fabrication. These observations provide key guidelines for the fabrication of stable solid-state nanopores on the scale of nucleic acids and small proteins.

  17. Biodistribution of Different Sized Nanodiamonds in Mice.

    Science.gov (United States)

    Purtov, Konstantin; Petunin, Alexey; Inzhevatkin, Evgeny; Burov, Andrey; Ronzhin, Nikita; Puzyr, Alexey; Bondar, Vladimir

    2015-02-01

    The particle size is one of critical parameters influencing the biodistribution of detonation nanodiamonds (DND) after their administration into the body. As DNDs are prone to aggregation, the difference between their sizes in aqueous and physiological solutions has to be taken into account. Radioactive I125-BSA molecules were covalently immobilized on DNDs divided in three fractions of different average size. The DND-BSAI125 conjugates were intravenously administrated into adult mice and the particle allocation in the animal's organs and blood was evaluated based on the radioactivity distribution. We conclude that most of the conjugates were taken from the bloodstream and trapped in the liver and spleen. The short-term distribution pattern for all DNDs was similar regardless of size and practically unchanged with time. No significant clearance of the particles was observed for 4 h, but the presence of DNDs was detected in the blood. It was found that the largest particles tend to accumulate more into the liver as compared to the smaller ones. However, the size effect was not well pronounced for the studied size range.

  18. Discrete hierarchical organization of social group sizes.

    Science.gov (United States)

    Zhou, W-X; Sornette, D; Hill, R A; Dunbar, R I M

    2005-02-22

    The 'social brain hypothesis' for the evolution of large brains in primates has led to evidence for the coevolution of neocortical size and social group sizes, suggesting that there is a cognitive constraint on group size that depends, in some way, on the volume of neural material available for processing and synthesizing information on social relationships. More recently, work on both human and non-human primates has suggested that social groups are often hierarchically structured. We combine data on human grouping patterns in a comprehensive and systematic study. Using fractal analysis, we identify, with high statistical confidence, a discrete hierarchy of group sizes with a preferred scaling ratio close to three: rather than a single or a continuous spectrum of group sizes, humans spontaneously form groups of preferred sizes organized in a geometrical series approximating 3-5, 9-15, 30-45, etc. Such discrete scale invariance could be related to that identified in signatures of herding behaviour in financial markets and might reflect a hierarchical processing of social nearness by human brains.

  19. Towards traceable size determination of extracellular vesicles.

    Science.gov (United States)

    Varga, Zoltán; Yuana, Yuana; Grootemaat, Anita E; van der Pol, Edwin; Gollwitzer, Christian; Krumrey, Michael; Nieuwland, Rienk

    2014-01-01

    Extracellular vesicles (EVs) have clinical importance due to their roles in a wide range of biological processes. The detection and characterization of EVs are challenging because of their small size, low refractive index, and heterogeneity. In this manuscript, the size distribution of an erythrocyte-derived EV sample is determined using state-of-the-art techniques such as nanoparticle tracking analysis, resistive pulse sensing, and electron microscopy, and novel techniques in the field, such as small-angle X-ray scattering (SAXS) and size exclusion chromatography coupled with dynamic light scattering detection. The mode values of the size distributions of the studied erythrocyte EVs reported by the different methods show only small deviations around 130 nm, but there are differences in the widths of the size distributions. SAXS is a promising technique with respect to traceability, as this technique was already applied for traceable size determination of solid nanoparticles in suspension. To reach the traceable measurement of EVs, monodisperse and highly concentrated samples are required.

  20. Towards traceable size determination of extracellular vesicles

    Directory of Open Access Journals (Sweden)

    Zoltán Varga

    2014-02-01

    Full Text Available Background: Extracellular vesicles (EVs have clinical importance due to their roles in a wide range of biological processes. The detection and characterization of EVs are challenging because of their small size, low refractive index, and heterogeneity. Methods: In this manuscript, the size distribution of an erythrocyte-derived EV sample is determined using state-of-the-art techniques such as nanoparticle tracking analysis, resistive pulse sensing, and electron microscopy, and novel techniques in the field, such as small-angle X-ray scattering (SAXS and size exclusion chromatography coupled with dynamic light scattering detection. Results: The mode values of the size distributions of the studied erythrocyte EVs reported by the different methods show only small deviations around 130 nm, but there are differences in the widths of the size distributions. Conclusion: SAXS is a promising technique with respect to traceability, as this technique was already applied for traceable size determination of solid nanoparticles in suspension. To reach the traceable measurement of EVs, monodisperse and highly concentrated samples are required.

  1. Packing and size determination of colloidal nanoclusters.

    Science.gov (United States)

    Pease, Leonard F; Tsai, De-Hao; Hertz, Joshua L; Zangmeister, Rebecca A; Zachariah, Michael R; Tarlov, Michael J

    2010-07-06

    Here we demonstrate a rapid and quantitative means to characterize the size and packing structure of small clusters of nanoparticles in colloidal suspension. Clustering and aggregation play important roles in a wide variety of phenomena of both scientific and technical importance, yet characterizing the packing of nanoparticles within small clusters and predicting their aerodynamic size remains challenging because available techniques can lack adequate resolution and sensitivity for clusters smaller than 100 nm (optical techniques), perturb the packing arrangement (electron microscopies), or provide only an ensemble average (light scattering techniques). In this article, we use electrospray-differential mobility analysis (ES-DMA), a technique that exerts electrical and drag forces on the clusters, to determine the size and packing of small clusters. We provide an analytical model to determine the mobility size of various packing geometries based on the projected area of the clusters. Data for clusters aggregated from nominally 10 nm gold particles and nonenveloped viruses of various sizes show good agreement between measured and predicted cluster sizes for close-packed spheres.

  2. Biofuel manufacturing from woody biomass: effects of sieve size used in biomass size reduction.

    Science.gov (United States)

    Zhang, Meng; Song, Xiaoxu; Deines, T W; Pei, Z J; Wang, Donghai

    2012-01-01

    Size reduction is the first step for manufacturing biofuels from woody biomass. It is usually performed using milling machines and the particle size is controlled by the size of the sieve installed on a milling machine. There are reported studies about the effects of sieve size on energy consumption in milling of woody biomass. These studies show that energy consumption increased dramatically as sieve size became smaller. However, in these studies, the sugar yield (proportional to biofuel yield) in hydrolysis of the milled woody biomass was not measured. The lack of comprehensive studies about the effects of sieve size on energy consumption in biomass milling and sugar yield in hydrolysis process makes it difficult to decide which sieve size should be selected in order to minimize the energy consumption in size reduction and maximize the sugar yield in hydrolysis. The purpose of this paper is to fill this gap in the literature. In this paper, knife milling of poplar wood was conducted using sieves of three sizes (1, 2, and 4 mm). Results show that, as sieve size increased, energy consumption in knife milling decreased and sugar yield in hydrolysis increased in the tested range of particle sizes.

  3. Sizing ocean giants: patterns of intraspecific size variation in marine megafauna.

    Science.gov (United States)

    McClain, Craig R; Balk, Meghan A; Benfield, Mark C; Branch, Trevor A; Chen, Catherine; Cosgrove, James; Dove, Alistair D M; Gaskins, Lindsay C; Helm, Rebecca R; Hochberg, Frederick G; Lee, Frank B; Marshall, Andrea; McMurray, Steven E; Schanche, Caroline; Stone, Shane N; Thaler, Andrew D

    2015-01-01

    What are the greatest sizes that the largest marine megafauna obtain? This is a simple question with a difficult and complex answer. Many of the largest-sized species occur in the world's oceans. For many of these, rarity, remoteness, and quite simply the logistics of measuring these giants has made obtaining accurate size measurements difficult. Inaccurate reports of maximum sizes run rampant through the scientific literature and popular media. Moreover, how intraspecific variation in the body sizes of these animals relates to sex, population structure, the environment, and interactions with humans remains underappreciated. Here, we review and analyze body size for 25 ocean giants ranging across the animal kingdom. For each taxon we document body size for the largest known marine species of several clades. We also analyze intraspecific variation and identify the largest known individuals for each species. Where data allows, we analyze spatial and temporal intraspecific size variation. We also provide allometric scaling equations between different size measurements as resources to other researchers. In some cases, the lack of data prevents us from fully examining these topics and instead we specifically highlight these deficiencies and the barriers that exist for data collection. Overall, we found considerable variability in intraspecific size distributions from strongly left- to strongly right-skewed. We provide several allometric equations that allow for estimation of total lengths and weights from more easily obtained measurements. In several cases, we also quantify considerable geographic variation and decreases in size likely attributed to humans.

  4. Variation in clutch size in relation to nest size in birds.

    Science.gov (United States)

    Møller, Anders P; Adriaensen, Frank; Artemyev, Alexandr; Bańbura, Jerzy; Barba, Emilio; Biard, Clotilde; Blondel, Jacques; Bouslama, Zihad; Bouvier, Jean-Charles; Camprodon, Jordi; Cecere, Francesco; Charmantier, Anne; Charter, Motti; Cichoń, Mariusz; Cusimano, Camillo; Czeszczewik, Dorota; Demeyrier, Virginie; Doligez, Blandine; Doutrelant, Claire; Dubiec, Anna; Eens, Marcel; Eeva, Tapio; Faivre, Bruno; Ferns, Peter N; Forsman, Jukka T; García-Del-Rey, Eduardo; Goldshtein, Aya; Goodenough, Anne E; Gosler, Andrew G; Góźdź, Iga; Grégoire, Arnaud; Gustafsson, Lars; Hartley, Ian R; Heeb, Philipp; Hinsley, Shelley A; Isenmann, Paul; Jacob, Staffan; Järvinen, Antero; Juškaitis, Rimvydas; Korpimäki, Erkki; Krams, Indrikis; Laaksonen, Toni; Leclercq, Bernard; Lehikoinen, Esa; Loukola, Olli; Lundberg, Arne; Mainwaring, Mark C; Mänd, Raivo; Massa, Bruno; Mazgajski, Tomasz D; Merino, Santiago; Mitrus, Cezary; Mönkkönen, Mikko; Morales-Fernaz, Judith; Morin, Xavier; Nager, Ruedi G; Nilsson, Jan-Åke; Nilsson, Sven G; Norte, Ana C; Orell, Markku; Perret, Philippe; Pimentel, Carla S; Pinxten, Rianne; Priedniece, Ilze; Quidoz, Marie-Claude; Remeš, Vladimir; Richner, Heinz; Robles, Hugo; Rytkönen, Seppo; Senar, Juan Carlos; Seppänen, Janne T; da Silva, Luís P; Slagsvold, Tore; Solonen, Tapio; Sorace, Alberto; Stenning, Martyn J; Török, János; Tryjanowski, Piotr; van Noordwijk, Arie J; von Numers, Mikael; Walankiewicz, Wiesław; Lambrechts, Marcel M

    2014-09-01

    Nests are structures built to support and protect eggs and/or offspring from predators, parasites, and adverse weather conditions. Nests are mainly constructed prior to egg laying, meaning that parent birds must make decisions about nest site choice and nest building behavior before the start of egg-laying. Parent birds should be selected to choose nest sites and to build optimally sized nests, yet our current understanding of clutch size-nest size relationships is limited to small-scale studies performed over short time periods. Here, we quantified the relationship between clutch size and nest size, using an exhaustive database of 116 slope estimates based on 17,472 nests of 21 species of hole and non-hole-nesting birds. There was a significant, positive relationship between clutch size and the base area of the nest box or the nest, and this relationship did not differ significantly between open nesting and hole-nesting species. The slope of the relationship showed significant intraspecific and interspecific heterogeneity among four species of secondary hole-nesting species, but also among all 116 slope estimates. The estimated relationship between clutch size and nest box base area in study sites with more than a single size of nest box was not significantly different from the relationship using studies with only a single size of nest box. The slope of the relationship between clutch size and nest base area in different species of birds was significantly negatively related to minimum base area, and less so to maximum base area in a given study. These findings are consistent with the hypothesis that bird species have a general reaction norm reflecting the relationship between nest size and clutch size. Further, they suggest that scientists may influence the clutch size decisions of hole-nesting birds through the provisioning of nest boxes of varying sizes.

  5. Determination of the optimal sample size for a clinical trial accounting for the population size.

    Science.gov (United States)

    Stallard, Nigel; Miller, Frank; Day, Simon; Hee, Siew Wan; Madan, Jason; Zohar, Sarah; Posch, Martin

    2017-07-01

    The problem of choosing a sample size for a clinical trial is a very common one. In some settings, such as rare diseases or other small populations, the large sample sizes usually associated with the standard frequentist approach may be infeasible, suggesting that the sample size chosen should reflect the size of the population under consideration. Incorporation of the population size is possible in a decision-theoretic approach either explicitly by assuming that the population size is fixed and known, or implicitly through geometric discounting of the gain from future patients reflecting the expected population size. This paper develops such approaches. Building on previous work, an asymptotic expression is derived for the sample size for single and two-arm clinical trials in the general case of a clinical trial with a primary endpoint with a distribution of one parameter exponential family form that optimizes a utility function that quantifies the cost and gain per patient as a continuous function of this parameter. It is shown that as the size of the population, N, or expected size, N∗ in the case of geometric discounting, becomes large, the optimal trial size is O(N1/2) or O(N∗1/2). The sample size obtained from the asymptotic expression is also compared with the exact optimal sample size in examples with responses with Bernoulli and Poisson distributions, showing that the asymptotic approximations can also be reasonable in relatively small sample sizes. © 2016 The Author. Biometrical Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Determination of size-specific exposure settings in dental cone-beam CT

    Energy Technology Data Exchange (ETDEWEB)

    Pauwels, Ruben [Chulalongkorn University, Department of Radiology, Faculty of Dentistry, Patumwan, Bangkok (Thailand); University of Leuven, OMFS-IMPATH Research Group, Department of Imaging and Pathology, Biomedical Sciences Group, Leuven (Belgium); Jacobs, Reinhilde [University of Leuven, OMFS-IMPATH Research Group, Department of Imaging and Pathology, Biomedical Sciences Group, Leuven (Belgium); Bogaerts, Ria [University of Leuven, Laboratory of Experimental Radiotherapy, Department of Oncology, Biomedical Sciences Group, Leuven (Belgium); Bosmans, Hilde [University of Leuven, Medical Physics and Quality Assessment, Department of Imaging and Pathology, Biomedical Sciences Group, Leuven (Belgium); Panmekiate, Soontra [Chulalongkorn University, Department of Radiology, Faculty of Dentistry, Patumwan, Bangkok (Thailand)

    2017-01-15

    To estimate the possible reduction of tube output as a function of head size in dental cone-beam computed tomography (CBCT). A 16 cm PMMA phantom, containing a central and six peripheral columns filled with PMMA, was used to represent an average adult male head. The phantom was scanned using CBCT, with 0-6 peripheral columns having been removed in order to simulate varying head sizes. For five kV settings (70-90 kV), the mAs required to reach a predetermined image noise level was determined, and corresponding radiation doses were derived. Results were expressed as a function of head size, age, and gender, based on growth reference charts. The use of 90 kV consistently resulted in the largest relative dose reduction. A potential mAs reduction ranging from 7 % to 50 % was seen for the different simulated head sizes, showing an exponential relation between head size and mAs. An optimized exposure protocol based on head circumference or age/gender is proposed. A considerable dose reduction, through reduction of the mAs rather than the kV, is possible for small-sized patients in CBCT, including children and females. Size-specific exposure protocols should be clinically implemented. (orig.)

  7. Determination of size-specific exposure settings in dental cone-beam CT

    International Nuclear Information System (INIS)

    Pauwels, Ruben; Jacobs, Reinhilde; Bogaerts, Ria; Bosmans, Hilde; Panmekiate, Soontra

    2017-01-01

    To estimate the possible reduction of tube output as a function of head size in dental cone-beam computed tomography (CBCT). A 16 cm PMMA phantom, containing a central and six peripheral columns filled with PMMA, was used to represent an average adult male head. The phantom was scanned using CBCT, with 0-6 peripheral columns having been removed in order to simulate varying head sizes. For five kV settings (70-90 kV), the mAs required to reach a predetermined image noise level was determined, and corresponding radiation doses were derived. Results were expressed as a function of head size, age, and gender, based on growth reference charts. The use of 90 kV consistently resulted in the largest relative dose reduction. A potential mAs reduction ranging from 7 % to 50 % was seen for the different simulated head sizes, showing an exponential relation between head size and mAs. An optimized exposure protocol based on head circumference or age/gender is proposed. A considerable dose reduction, through reduction of the mAs rather than the kV, is possible for small-sized patients in CBCT, including children and females. Size-specific exposure protocols should be clinically implemented. (orig.)

  8. Reference doses and patient size in paediatric radiology

    International Nuclear Information System (INIS)

    Hart, D.; Wall, B.; Shrimpton, P.

    2000-01-01

    There is a wide range in patient size from a newborn baby to a 15 year old adolescent. Reference doses for paediatric radiology can sensibly be established only for specific sizes of children. Here five standard sizes have been chosen, representing 0 (newborn), 1, 5, 10 and 15 year old patients. This selection of standard ages has the advantage of matching the paediatric mathematical phantoms which are often used in Monte Carlo organ dose calculations. A method has been developed for calculating factors for normalising doses measured on individual children to those for the nearest standard-sized 'child'. These normalisation factors for entrance surface dose (ESD) and dose-area product (DAP) measurements depend on the thickness of the real child, the thickness of the nearest standard 'child', and an effective linear attenuation coefficient (μ) which is itself a function of the x-ray spectrum, the field size, and whether or not an antiscatter grid is used. Entrance and exit dose measurements were made with phantom material representing soft tissue to establish μ values for abdominal and head examinations, and with phantom material representing lung for chest examinations. These measurements of μ were confirmed and extended to other x-ray spectra and field sizes by Monte Carlo calculations. The normalisation factors are tabulated for ESD measurements for specific radiographic projections through the head and trunk, and for DAP measurements for complete multiprojection examinations in the trunk. The normalisation factors were applied to European survey data for entrance surface dose and dose-area product measurements to derive provisional reference doses for common radiographic projections and for micturating cystourethrography (MCU) examinations - the most frequent fluoroscopic examination on children. (author)

  9. The Roles of Size and Size Difference in Australian and Chinese Inter-firm Collaborations

    Directory of Open Access Journals (Sweden)

    Yu Zhang

    Full Text Available There has been considerable debate on the contribution and significance of firm size to the establishment, operation and success of business collaboration. One important source of this debate arises from differing definitions of firm size used in previous research. This paper uses firm size categories and size differences between collaborating firms to examine their contribution to the formation and performance of inter-firmcollaboration in Australia and China. Both qualitative case study and quantitative data analyses are adopted in this paper. Results from both the qualitative case study and quantitative study in Australia and China show that size plays a significant positive role in the formation and performance of business collaboration. Firmsprefer collaborating with larger partners. Bigger firms are more likely to achieve success collaborations. However, size difference plays a negative role in business collaboration. Collaborating with a bigger partner makes it harder to succeed. On the other hand, size and size difference play very different roles in performanceand outcomes of business collaboration in different countries.This paper compares the roles of firm size and size difference in Australian and Chinese inter-firm collaboration. The results provide important strategic implications for business managers, industry regulators, and policy decision makers regarding international business collaboration.

  10. Beyond size-number trade-offs: clutch size as a maternal effect.

    Science.gov (United States)

    Brown, Gregory P; Shine, Richard

    2009-04-27

    Traditionally, research on life-history traits has viewed the link between clutch size and offspring size as a straightforward linear trade-off; the product of these two components is taken as a measure of maternal reproductive output. Investing more per egg results in fewer but larger eggs and, hence, offspring. This simple size-number trade-off has proved attractive to modellers, but our experimental studies on keelback snakes (Tropidonophis mairii, Colubridae) reveal a more complex relationship between clutch size and offspring size. At constant water availability, the amount of water taken up by a snake egg depends upon the number of adjacent eggs. In turn, water uptake affects hatchling size, and therefore an increase in clutch size directly increases offspring size (and thus fitness under field conditions). This allometric advantage may influence the evolution of reproductive traits such as growth versus reproductive effort, optimal age at female maturation, the body-reserve threshold required to initiate reproduction and nest-site selection (e.g. communal oviposition). The published literature suggests that similar kinds of complex effects of clutch size on offspring viability are widespread in both vertebrates and invertebrates. Our results also challenge conventional experimental methodologies such as split-clutch designs for laboratory incubation studies: by separating an egg from its siblings, we may directly affect offspring size and thus viability.

  11. Isometric size-scaling of metabolic rate and the size abundance distribution of phytoplankton

    Science.gov (United States)

    Huete-Ortega, María; Cermeño, Pedro; Calvo-Díaz, Alejandra; Marañón, Emilio

    2012-01-01

    The relationship between phytoplankton cell size and abundance has long been known to follow regular, predictable patterns in near steady-state ecosystems, but its origin has remained elusive. To explore the linkage between the size-scaling of metabolic rate and the size abundance distribution of natural phytoplankton communities, we determined simultaneously phytoplankton carbon fixation rates and cell abundance across a cell volume range of over six orders of magnitude in tropical and subtropical waters of the Atlantic Ocean. We found an approximately isometric relationship between carbon fixation rate and cell size (mean slope value: 1.16; range: 1.03–1.32), negating the idea that Kleiber's law is applicable to unicellular autotrophic protists. On the basis of the scaling of individual resource use with cell size, we predicted a reciprocal relationship between the size-scalings of phytoplankton metabolic rate and abundance. This prediction was confirmed by the observed slopes of the relationship between phytoplankton abundance and cell size, which have a mean value of −1.15 (range: −1.29 to −0.97), indicating that the size abundance distribution largely results from the size-scaling of metabolic rate. Our results imply that the total energy processed by carbon fixation is constant along the phytoplankton size spectrum in near steady-state marine ecosystems. PMID:22171079

  12. Depicted serving size: cereal packaging pictures exaggerate serving sizes and promote overserving.

    Science.gov (United States)

    Tal, Aner; Niemann, Stina; Wansink, Brian

    2017-02-06

    Extensive work has focused on the effects of nutrition label information on consumer behavior on the one hand, and on the effects of packaging graphics on the other hand. However, little work has examined how serving suggestion depictions - graphics relating to serving size - influence the quantity consumers serve themselves. The current work examines the prevalence of exaggerated serving size depictions on product packaging (study 1) and its effects on food serving in the context of cereal (study 2). Study 1 was an observational field survey of cereal packaging. Study 2 was a mixed experimental cross-sectional design conducted at a U.S. university, with 51 student participants. Study 1 coded 158 US breakfast cereals and compared the serving sizes depicted on the front of the box with the suggested serving size stated on the nutrition facts panel. Study 2 measured the amount of cereal poured from exaggerated or accurate serving size depictions. Study 1 compared average servings via t-tests. Study 2 used a mixed model with cereal type as the repeated measure and a compound symmetry covariance matrix. Study 1 demonstrated that portion size depictions on the front of 158 cereal boxes were 65.84% larger (221 vs. 134 calories) than the recommended portions on nutrition facts panels of those cereals. Study 2 showed that boxes that depicted exaggerated serving sizes led people to pour 20% more cereal compared to pouring from modified boxes that depicted a single-size portion of cereal matching suggested serving size. This was 45% over the suggested serving size. Biases in depicted serving size depicted on cereal packaging are prevalent in the marketplace. Such biases may lead to overserving, which may consequently lead to overeating. Companies should depict the recommended serving sizes, or otherwise indicate that the depicted portion represents an exaggerated serving size.

  13. Depicted serving size: cereal packaging pictures exaggerate serving sizes and promote overserving

    Directory of Open Access Journals (Sweden)

    Aner Tal

    2017-02-01

    Full Text Available Abstract Background Extensive work has focused on the effects of nutrition label information on consumer behavior on the one hand, and on the effects of packaging graphics on the other hand. However, little work has examined how serving suggestion depictions - graphics relating to serving size - influence the quantity consumers serve themselves. The current work examines the prevalence of exaggerated serving size depictions on product packaging (study 1 and its effects on food serving in the context of cereal (study 2. Methods Study 1 was an observational field survey of cereal packaging. Study 2 was a mixed experimental cross-sectional design conducted at a U.S. university, with 51 student participants. Study 1 coded 158 US breakfast cereals and compared the serving sizes depicted on the front of the box with the suggested serving size stated on the nutrition facts panel. Study 2 measured the amount of cereal poured from exaggerated or accurate serving size depictions. Study 1 compared average servings via t-tests. Study 2 used a mixed model with cereal type as the repeated measure and a compound symmetry covariance matrix. Results Study 1 demonstrated that portion size depictions on the front of 158 cereal boxes were 64.7% larger (221 vs. 134 calories than the recommended portions on nutrition facts panels of those cereals. Study 2 showed that boxes that depicted exaggerated serving sizes led people to pour 17.8% more cereal compared to pouring from modified boxes that depicted a single-size portion of cereal matching suggested serving size. This was 42% over the suggested serving size. Conclusions Biases in depicted serving size depicted on cereal packaging are prevalent in the marketplace. Such biases may lead to overserving, which may consequently lead to overeating. Companies should depict the recommended serving sizes, or otherwise indicate that the depicted portion represents an exaggerated serving size.

  14. Size Evolution and Stochastic Models: Explaining Ostracod Size through Probabilistic Distributions

    Science.gov (United States)

    Krawczyk, M.; Decker, S.; Heim, N. A.; Payne, J.

    2014-12-01

    The biovolume of animals has functioned as an important benchmark for measuring evolution throughout geologic time. In our project, we examined the observed average body size of ostracods over time in order to understand the mechanism of size evolution in these marine organisms. The body size of ostracods has varied since the beginning of the Ordovician, where the first true ostracods appeared. We created a stochastic branching model to create possible evolutionary trees of ostracod size. Using stratigraphic ranges for ostracods compiled from over 750 genera in the Treatise on Invertebrate Paleontology, we calculated overall speciation and extinction rates for our model. At each timestep in our model, new lineages can evolve or existing lineages can become extinct. Newly evolved lineages are assigned sizes based on their parent genera. We parameterized our model to generate neutral and directional changes in ostracod size to compare with the observed data. New sizes were chosen via a normal distribution, and the neutral model selected new sizes differentials centered on zero, allowing for an equal chance of larger or smaller ostracods at each speciation. Conversely, the directional model centered the distribution on a negative value, giving a larger chance of smaller ostracods. Our data strongly suggests that the overall direction of ostracod evolution has been following a model that directionally pushes mean ostracod size down, shying away from a neutral model. Our model was able to match the magnitude of size decrease. Our models had a constant linear decrease while the actual data had a much more rapid initial rate followed by a constant size. The nuance of the observed trends ultimately suggests a more complex method of size evolution. In conclusion, probabilistic methods can provide valuable insight into possible evolutionary mechanisms determining size evolution in ostracods.

  15. Detecting past changes of effective population size

    Science.gov (United States)

    Nikolic, Natacha; Chevalet, Claude

    2014-01-01

    Understanding and predicting population abundance is a major challenge confronting scientists. Several genetic models have been developed using microsatellite markers to estimate the present and ancestral effective population sizes. However, to get an overview on the evolution of population requires that past fluctuation of population size be traceable. To address the question, we developed a new model estimating the past changes of effective population size from microsatellite by resolving coalescence theory and using approximate likelihoods in a Monte Carlo Markov Chain approach. The efficiency of the model and its sensitivity to gene flow and to assumptions on the mutational process were checked using simulated data and analysis. The model was found especially useful to provide evidence of transient changes of population size in the past. The times at which some past demographic events cannot be detected because they are too ancient and the risk that gene flow may suggest the false detection of a bottleneck are discussed considering the distribution of coalescence times. The method was applied on real data sets from several Atlantic salmon populations. The method called VarEff (Variation of Effective size) was implemented in the R package VarEff and is made available at https://qgsp.jouy.inra.fr and at http://cran.r-project.org/web/packages/VarEff. PMID:25067949

  16. Perceived face size in healthy adults.

    Science.gov (United States)

    D'Amour, Sarah; Harris, Laurence R

    2017-01-01

    Perceptual body size distortions have traditionally been studied using subjective, qualitative measures that assess only one type of body representation-the conscious body image. Previous research on perceived body size has typically focused on measuring distortions of the entire body and has tended to overlook the face. Here, we present a novel psychophysical method for determining perceived body size that taps into implicit body representation. Using a two-alternative forced choice (2AFC), participants were sequentially shown two life-size images of their own face, viewed upright, upside down, or tilted 90°. In one interval, the width or length dimension was varied, while the other interval contained an undistorted image. Participants reported which image most closely matched their own face. An adaptive staircase adjusted the distorted image to hone in on the image that was equally likely to be judged as matching their perceived face as the accurate image. When viewed upright or upside down, face width was overestimated and length underestimated, whereas perception was accurate for the on-side views. These results provide the first psychophysically robust measurements of how accurately healthy participants perceive the size of their face, revealing distortions of the implicit body representation independent of the conscious body image.

  17. Modeling and optimization of wet sizing process

    International Nuclear Information System (INIS)

    Thai Ba Cau; Vu Thanh Quang and Nguyen Ba Tien

    2004-01-01

    Mathematical simulation on basis of Stock law has been done for wet sizing process on cylinder equipment of laboratory and semi-industrial scale. The model consists of mathematical equations describing relations between variables, such as: - Resident time distribution function of emulsion particles in the separating zone of the equipment depending on flow-rate, height, diameter and structure of the equipment. - Size-distribution function in the fine and coarse parts depending on resident time distribution function of emulsion particles, characteristics of the material being processed, such as specific density, shapes, and characteristics of the environment of classification, such as specific density, viscosity. - Experimental model was developed on data collected from an experimental cylindrical equipment with diameter x height of sedimentation chamber equal to 50 x 40 cm for an emulsion of zirconium silicate in water. - Using this experimental model allows to determine optimal flow-rate in order to obtain product with desired grain size in term of average size or size distribution function. (author)

  18. Disruption effects on the beam size measurement

    Energy Technology Data Exchange (ETDEWEB)

    Raimondi, P.; Decker, F.J.; Chen, P.

    1995-06-01

    At the SLC Final Focus with higher currents and smaller beam sizes, the disruption parameter D{sub y} is close to one and so the pinch effect should produce a luminosity enhancement. Since a flat beam-beam function is fit to deflection scan data to measure the beam size, disruption can affect the measurement. Here the authors discuss the quantitative effects of disruption for typical SLC beam parameters. With 3.5 10{sup 10} particles per pulse, bunch length of 0.8 mm and beam sizes of 2.1 {mu}m horizontally and 0.55 {mu}m vertically, the measured vertical size can be as much as 25% bigger than the real one. Furthermore during the collision the spot size actually decrease, producing an enhancement factor H{sub D} of about 1.25. This would yield to a true luminosity which is 1.6 times that which is estimated from the beam-beam deflection fit.

  19. Robotic system for glovebox size reduction

    International Nuclear Information System (INIS)

    KWOK, KWAN S.; MCDONALD, MICHAEL J.

    2000-01-01

    The Intelligent Systems and Robotics Center (ISRC) at Sandia National Laboratories (SNL) is developing technologies for glovebox size reduction in the DOE nuclear complex. A study was performed for Kaiser-Hill (KH) at the Rocky Flats Environmental Technology Site (RFETS) on the available technologies for size reducing the glovebox lines that require size reduction in place. Currently, the baseline approach to these glovebox lines is manual operations using conventional mechanical cutting methods. The study has been completed and resulted in a concept of the robotic system for in-situ size reduction. The concept makes use of commercially available robots that are used in the automotive industry. The commercially available industrial robots provide high reliability and availability that are required for environmental remediation in the DOE complex. Additionally, the costs of commercial robots are about one-fourth that of the custom made robots for environmental remediation. The reason for the lower costs and the higher reliability is that there are thousands of commercial robots made annually, whereas there are only a few custom robots made for environmental remediation every year. This paper will describe the engineering analysis approach used in the design of the robotic system for glovebox size reduction

  20. Detecting past changes of effective population size.

    Science.gov (United States)

    Nikolic, Natacha; Chevalet, Claude

    2014-06-01

    Understanding and predicting population abundance is a major challenge confronting scientists. Several genetic models have been developed using microsatellite markers to estimate the present and ancestral effective population sizes. However, to get an overview on the evolution of population requires that past fluctuation of population size be traceable. To address the question, we developed a new model estimating the past changes of effective population size from microsatellite by resolving coalescence theory and using approximate likelihoods in a Monte Carlo Markov Chain approach. The efficiency of the model and its sensitivity to gene flow and to assumptions on the mutational process were checked using simulated data and analysis. The model was found especially useful to provide evidence of transient changes of population size in the past. The times at which some past demographic events cannot be detected because they are too ancient and the risk that gene flow may suggest the false detection of a bottleneck are discussed considering the distribution of coalescence times. The method was applied on real data sets from several Atlantic salmon populations. The method called VarEff (Variation of Effective size) was implemented in the R package VarEff and is made available at https://qgsp.jouy.inra.fr and at http://cran.r-project.org/web/packages/VarEff.

  1. Resources and energetics determined dinosaur maximal size.

    Science.gov (United States)

    McNab, Brian K

    2009-07-21

    Some dinosaurs reached masses that were approximately 8 times those of the largest, ecologically equivalent terrestrial mammals. The factors most responsible for setting the maximal body size of vertebrates are resource quality and quantity, as modified by the mobility of the consumer, and the vertebrate's rate of energy expenditure. If the food intake of the largest herbivorous mammals defines the maximal rate at which plant resources can be consumed in terrestrial environments and if that limit applied to dinosaurs, then the large size of sauropods occurred because they expended energy in the field at rates extrapolated from those of varanid lizards, which are approximately 22% of the rates in mammals and 3.6 times the rates of other lizards of equal size. Of 2 species having the same energy income, the species that uses the most energy for mass-independent maintenance of necessity has a smaller size. The larger mass found in some marine mammals reflects a greater resource abundance in marine environments. The presumptively low energy expenditures of dinosaurs potentially permitted Mesozoic communities to support dinosaur biomasses that were up to 5 times those found in mammalian herbivores in Africa today. The maximal size of predatory theropods was approximately 8 tons, which if it reflected the maximal capacity to consume vertebrates in terrestrial environments, corresponds in predatory mammals to a maximal mass less than a ton, which is what is observed. Some coelurosaurs may have evolved endothermy in association with the evolution of feathered insulation and a small mass.

  2. INVITED REVIEW: Farm size and animal welfare.

    Science.gov (United States)

    Robbins, J A; von Keyserlingk, M A G; Fraser, D; Weary, D M

    2016-12-01

    Critics of agricultural intensification have argued that the transition from smaller to larger farms has compromised animal welfare. To critically examine evidence relevant to this claim, we reviewed more than 150 publications that examined the relationship between farm size and at least one animal welfare indicator. Although much of this literature focuses on dairy cattle, we also reference other farmed species where appropriate. We found little evidence of any simple relationship, negative or positive, between farm size and animal welfare. Instead, the evidence suggests that larger farms provide some opportunities to improve animal welfare but may also create welfare risks. For example, larger farms permit more specialized and professional management of animal health but can make it more difficult to accommodate outdoor access that some view as integral to animal welfare. Future research should attempt to specify the underlying casual mechanisms by which statistical associations between farm size and indicators of welfare are believed to occur. We also suggest that policy and advocacy efforts aimed at reversing increases in farm size would be better directed toward improving welfare on farms of all sizes.

  3. Size-dependent diffusion of membrane inclusions.

    Science.gov (United States)

    Guigas, Gernot; Weiss, Matthias

    2006-10-01

    Experimentally determined diffusion constants are often used to elucidate the size and oligomeric state of membrane proteins and domains. This approach critically relies on the knowledge of the size-dependence of diffusion. We have used mesoscopic simulations to thoroughly quantify the size-dependent diffusion properties of membrane inclusions. For small radii R, we find that the lateral diffusion coefficient D is well described by the Saffman-Delbrück relation, which predicts a logarithmic decrease of D with R. However, beyond a critical radius Rc approximately hetam/(2etac) (h, bilayer thickness; etam/c, viscosity of the membrane/surrounding solvent) we observe significant deviations and the emergence of an asymptotic scaling D approximately 1/R2. The latter originates from the asymptotic hydrodynamics and the inclusion's internal degrees of freedom that become particularly relevant on short timescales. In contrast to the lateral diffusion, the size dependence of the rotational diffusion constant Dr follows the predicted hydrodynamic scaling Dr approximately 1/R2 over the entire range of sizes studied here.

  4. The size distributions of all Indian cities

    Science.gov (United States)

    Luckstead, Jeff; Devadoss, Stephen; Danforth, Diana

    2017-05-01

    We apply five distributions-lognormal, double-Pareto lognormal, lognormal-upper tail Pareto, Pareto tails-lognormal, and Pareto tails-lognormal with differentiability restrictions-to estimate the size distribution of all Indian cities. Since India contains numerous small cities, it is important to explicitly model the lower-tail behavior for studying the distribution of all Indian cities. Our results rigorously confirm, using both graphical and formal statistical tests, that among these five distributions, Pareto tails-lognormal is a better suited parametrization of the Indian city size data, verifying that the Indian city size distribution exhibits a strong reverse Pareto in the lower tail, lognormal in the mid-range body, and Pareto in the upper tail.

  5. A brief history of seed size.

    Science.gov (United States)

    Moles, Angela T; Ackerly, David D; Webb, Campbell O; Tweddle, John C; Dickie, John B; Westoby, Mark

    2005-01-28

    Improved phylogenies and the accumulation of broad comparative data sets have opened the way for phylogenetic analyses to trace trait evolution in major groups of organisms. We arrayed seed mass data for 12,987 species on the seed plant phylogeny and show the history of seed size from the emergence of the angiosperms through to the present day. The largest single contributor to the present-day spread of seed mass was the divergence between angiosperms and gymnosperms, whereas the widest divergence was between Celastraceae and Parnassiaceae. Wide divergences in seed size were more often associated with divergences in growth form than with divergences in dispersal syndrome or latitude. Cross-species studies and evolutionary theory are consistent with this evidence that growth form and seed size evolve in a coordinated manner.

  6. Capacitated dynamic lot sizing with capacity acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    2011-01-01

    planning decisions directly. In this article, we address the joint capacitated lot-sizing and capacity-acquisition problems. The firm can produce goods in each of the finite periods into which the production season is partitioned. Fixed as well as variable production costs are incurred for each production....... For this situation, we develop a model which combines the complexity of time-varying demand and cost functions and of scale economies arising from dynamic lot-sizing costs with the purchase cost of capacity. We propose a heuristic algorithm that runs in polynomial time to determine a good capacity level...... and corresponding lot-sizing plan simultaneously. Numerical experiments show that our method is a good trade-off between solution quality and running time....

  7. Black carbon aerosol size in snow.

    Science.gov (United States)

    Schwarz, J P; Gao, R S; Perring, A E; Spackman, J R; Fahey, D W

    2013-01-01

    The effect of anthropogenic black carbon (BC) aerosol on snow is of enduring interest due to its consequences for climate forcing. Until now, too little attention has been focused on BC's size in snow, an important parameter affecting BC light absorption in snow. Here we present first observations of this parameter, revealing that BC can be shifted to larger sizes in snow than are typically seen in the atmosphere, in part due to the processes associated with BC removal from the atmosphere. Mie theory analysis indicates a corresponding reduction in BC absorption in snow of 40%, making BC size in snow the dominant source of uncertainty in BC's absorption properties for calculations of BC's snow albedo climate forcing. The shift reduces estimated BC global mean snow forcing by 30%, and has scientific implications for our understanding of snow albedo and the processing of atmospheric BC aerosol in snowfall.

  8. Technique for determining training staff size

    International Nuclear Information System (INIS)

    Frye, S.R.

    1985-01-01

    Determining an adequate training staff size is a vital function of a training manager. Today's training requirements and standards have dictated a more stringent work load than ever before. A trainer's role is more than just providing classroom lectures. In most organizations the instructor must develop programs, lesson plans, exercise guides, objectives, test questions, etc. The tasks of a training organization are never ending and the appropriate resources must be determined and allotted to do the total job. A simple method exists for determining an adequate staff. Although not perfect, this method will provide a realistic approach for determining the needed training staff size. This method considers three major factors: instructional man-hours; non-instructional man-hours; and instructor availability. By determining and adding instructional man-hours and non-instructional man-hours a total man-hour distribution can be obtained. By dividing this by instructor availability a staff size can be determined

  9. A sub-Mercury-sized exoplanet.

    Science.gov (United States)

    Barclay, Thomas; Rowe, Jason F; Lissauer, Jack J; Huber, Daniel; Fressin, François; Howell, Steve B; Bryson, Stephen T; Chaplin, William J; Désert, Jean-Michel; Lopez, Eric D; Marcy, Geoffrey W; Mullally, Fergal; Ragozzine, Darin; Torres, Guillermo; Adams, Elisabeth R; Agol, Eric; Barrado, David; Basu, Sarbani; Bedding, Timothy R; Buchhave, Lars A; Charbonneau, David; Christiansen, Jessie L; Christensen-Dalsgaard, Jørgen; Ciardi, David; Cochran, William D; Dupree, Andrea K; Elsworth, Yvonne; Everett, Mark; Fischer, Debra A; Ford, Eric B; Fortney, Jonathan J; Geary, John C; Haas, Michael R; Handberg, Rasmus; Hekker, Saskia; Henze, Christopher E; Horch, Elliott; Howard, Andrew W; Hunter, Roger C; Isaacson, Howard; Jenkins, Jon M; Karoff, Christoffer; Kawaler, Steven D; Kjeldsen, Hans; Klaus, Todd C; Latham, David W; Li, Jie; Lillo-Box, Jorge; Lund, Mikkel N; Lundkvist, Mia; Metcalfe, Travis S; Miglio, Andrea; Morris, Robert L; Quintana, Elisa V; Stello, Dennis; Smith, Jeffrey C; Still, Martin; Thompson, Susan E

    2013-02-28

    Since the discovery of the first exoplanets, it has been known that other planetary systems can look quite unlike our own. Until fairly recently, we have been able to probe only the upper range of the planet size distribution, and, since last year, to detect planets that are the size of Earth or somewhat smaller. Hitherto, no planets have been found that are smaller than those we see in the Solar System. Here we report a planet significantly smaller than Mercury. This tiny planet is the innermost of three that orbit the Sun-like host star, which we have designated Kepler-37. Owing to its extremely small size, similar to that of the Moon, and highly irradiated surface, the planet, Kepler-37b, is probably rocky with no atmosphere or water, similar to Mercury.

  10. Intercomparison of 15 Aerodynamic Particle Size Spectrometers (APS 3321): Uncertainties in Particle Sizing and Number Size Distribution.

    Czech Academy of Sciences Publication Activity Database

    Pfeifer, S.; Müller, T.; Weinhold, K.; Zíková, Naděžda; dos Santos, S.M.; Marinoni, A.; Bischof, O.F.; Kykal, C.; Ries, L.; Meinhardt, F.; Aalto, P.; Mihalopoulos, N.; Wiedensohler, A.

    2016-01-01

    Roč. 9, č. 4 (2016), s. 1545-1551 ISSN 1867-1381 EU Projects: European Commission(XE) 262254 - ACTRIS Institutional support: RVO:67985858 Keywords : counting efficiency * aerodynamic particle size spectrometers * laboratory study Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.089, year: 2016

  11. [Effect sizes, statistical power and sample sizes in "the Japanese Journal of Psychology"].

    Science.gov (United States)

    Suzukawa, Yumi; Toyoda, Hideki

    2012-04-01

    This study analyzed the statistical power of research studies published in the "Japanese Journal of Psychology" in 2008 and 2009. Sample effect sizes and sample statistical powers were calculated for each statistical test and analyzed with respect to the analytical methods and the fields of the studies. The results show that in the fields like perception, cognition or learning, the effect sizes were relatively large, although the sample sizes were small. At the same time, because of the small sample sizes, some meaningful effects could not be detected. In the other fields, because of the large sample sizes, meaningless effects could be detected. This implies that researchers who could not get large enough effect sizes would use larger samples to obtain significant results.

  12. Variation in clutch size in relation to nest size in birds

    OpenAIRE

    Moller Anders P.; Adriaensen Frank; Artemyev Alexandr; Banbura Jerzy; Barba Emilio; Biard Clotilde; Blondel Jacques; Bouslama Zihad; Bouvier Jean-Charles; Camprodon Jordi; Cecere Francesco; Charmantier Anne; Charter Motti; Cichon Mariusz; Cusimano Camillo

    2014-01-01

    © 2014 The Authors. Nests are structures built to support and protect eggs and/or offspring from predators, parasites, and adverse weather conditions. Nests are mainly constructed prior to egg laying, meaning that parent birds must make decisions about nest site choice and nest building behavior before the start of egg-laying. Parent birds should be selected to choose nest sites and to build optimally sized nests, yet our current understanding of clutch size-nest size relationships is limited...

  13. Density-dependent effects on growth, body size, and clutch size in Black Brant

    Science.gov (United States)

    Sedinger, James S.; Lindberg, Mark S.; Person, Brian T.; Eichholz, Michael W.; Herzog, Mark P.; Flint, Paul L.

    1998-01-01

    We documented gosling size in late summer, adult body size, and clutch size of known-age Black Brant (Branta bernicla nigricans) females nesting on the Tutakoke River colony between 1986 and 1995. During this period, the colony increased from 1,100 to >5,000 nesting pairs. Gosling mass at 30 days of age declined from 764 ± SE of 13 g and 723 ± 15 g for males and females, respectively, in the 1986 cohort, to 665 ± 18 g and 579 ± 18 g in the 1994 cohort. Gosling size was directly negatively correlated with number of Black Brant broods. We detected no trend in adult body size for individuals from these cohorts; in fact, adults from the 1992 and 1994 cohorts had the largest overall masses. Clutch size increased with age from 3.4 eggs for 2-year-old females to 4.4 eggs for 5-year-old females. Clutch size declined during the study by 0.20 (3-year-old females) to 0.45 (2-year-old females) eggs. Clutch size did not decline between the 1986 and 1990 cohorts for females that were >5 years old. Our results for clutch size and gosling size are similar to those recorded for Lesser Snow Geese (Chen caerulescens caerulescens). Our failure to detect a trend in adult body size, however, differs from the response of other geese to increasing population density. We interpret this difference in effects of density on adult size between Black Brant and other geese as an indication of stronger selection against the smallest individuals in Black Brant relative to other species of geese.

  14. Capacitated Dynamic Lot Sizing with Capacity Acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    directly. In this paper, we address the joint capacitated lot sizing and capacity acquisition problem. The firm can produce goods in each of the finite periods into which the production season is partitioned. Fixed as well as variable production costs are incurred for each production batch, along...... a model which combines the complexity of time-varying demand and cost functions and that of scale economies arising from dynamic lot-sizing costs with the purchase cost of capacity. We propose a heuristic algorithm that runs in polynomial time to determine a good capacity level and corresponding lot...

  15. On the Shuffle Automaton Size for Words

    Directory of Open Access Journals (Sweden)

    Franziska Biegler

    2009-07-01

    Full Text Available We investigate the state size of DFAs accepting the shuffle of two words. We provide words u and v, such that the minimal DFA for u shuffled with v requires an exponential number of states. We also show some conditions for the words u and v which ensure a quadratic upper bound on the state size of u shuffled with v. Moreover, switching only two letters within one of u or v is enough to trigger the change from quadratic to exponential.

  16. Signal processing for underclad crack sizing

    International Nuclear Information System (INIS)

    Shankar, R.; Lane, S.S.; Paradiso, T.J.; Quinn, J.R.

    1985-01-01

    The techniques developed in this work provide a means of sizing underclad cracks and quality control methods for assessing the accuracy of the data. Data were collected with a minicomputer (LSI 11-02), a transient recorder (Biomaton 8100) and anti-aliasing filter. Three techniques were developed: the calibration curve, phase velocity and epicentral. The phase reversal characteristic in the data is a strong indication of the nature of the signal source. That is, cracks are clearly seperable from two isolated inclusions on the basis of observed phase reversal. These methods have been implemented on a computer and appear to provide an accurate rapid method to discriminate and size underclad cracks

  17. Sizing algorithm with continuous customizable clipping

    Science.gov (United States)

    Morales, Domingo; Baytelman, Felipe; Araya, Hugo

    2008-10-01

    Polygon sizing is required during Mask Data Preparation in order to generate derived layers and as process bias to account for edge effects of etching. Two main features are required for polygon sizing algorithms to be useful in Mask Data Preparation software: correctness to avoid data corruption and clipping of the projection of acute angle vertices to limit connectivity modifications. However, current available solutions are either based on heuristics, producing corrupted results for certain input, or based on algorithms which may fail to maintain original design's connectivity for certain input. A novel algorithm including customizable clipping is presented.

  18. Control of pore size in epoxy systems.

    Energy Technology Data Exchange (ETDEWEB)

    Sawyer, Patricia Sue; Lenhart, Joseph Ludlow (North Dakota State University, Fargo, ND); Lee, Elizabeth (North Dakota State University, Fargo, ND); Kallam, Alekhya (North Dakota State University, Fargo, ND); Majumdar, Partha (North Dakota State University, Fargo, ND); Dirk, Shawn M.; Gubbins, Nathan; Chisholm, Bret J. (North Dakota State University, Fargo, ND); Celina, Mathias C.; Bahr, James (North Dakota State University, Fargo, ND); Klein, Robert J.

    2009-01-01

    Both conventional and combinatorial approaches were used to study the pore formation process in epoxy based polymer systems. Sandia National Laboratories conducted the initial work and collaborated with North Dakota State University (NDSU) using a combinatorial research approach to produce a library of novel monomers and crosslinkers capable of forming porous polymers. The library was screened to determine the physical factors that control porosity, such as porogen loading, polymer-porogen interactions, and polymer crosslink density. We have identified the physical and chemical factors that control the average porosity, pore size, and pore size distribution within epoxy based systems.

  19. Evolution of genome size in Brassicaceae.

    Science.gov (United States)

    Johnston, J Spencer; Pepper, Alan E; Hall, Anne E; Chen, Z Jeffrey; Hodnett, George; Drabek, Janice; Lopez, Rebecca; Price, H James

    2005-01-01

    Brassicaceae, with nearly 340 genera and more than 3350 species, anchors the low range of angiosperm genome sizes. The relatively narrow range of DNA content (0.16 pg Lepidium virginicum and Brassica rapa. Branches in the phylogenetic tree that represent probable evolutionary increases in genome size terminate in Arabidopsis halleri, A. lyrata, Arabis hirsuta, Capsella rubella, Caulanthus heterophyllus, Crucihimalaya, Lepidium sativum, Sisymbrium and Thlaspi arvense. Branches within one clade containing Brassica were identified that represent two ancient ploidy events (2x to 4x and 4x to 6x) that were predicted from published comparative mapping studies.

  20. [Influence of slot size on torque control].

    Science.gov (United States)

    Tian, Jun; Liu, Zhong-Hao; Zhang, Ding; Wu, Chuan-Jun

    2009-12-01

    To study the influence of two slot size brackets on torque control when teeth interacted in the same arch. After the upper arch was aligned and leveled in Typodont study, the inclinations of upper teeth 5 +/- 5 were measured when 0.457 2 mm x 0.635 0 mm OPA-K brackets and 0.558 8 mmx0.711 2 mm OPA-K brackets were filled with 0.431 8 mm x 0.635 0 mm stainless steel wire. This experiment was duplicated 10 times. The inclin of each tooth were transformed to the absolute values of the torque play angle psi by computing program, and paired-t test was used. The two kinds of slot size brackets were different with statistical significance on torque control. When the brackets were filled with 0.431 8 mm x 0.635 0 mm stainless steel wire, the absolute values of the angle psi in 0.558 8 mm x 0.711 2 mm and 0.457 2 mm x 0.635 0 mm slot size brackets were 6.140 degrees +/- 3.758 degrees and 2.608 degrees +/- 1.479 degrees respectively, and the average difference of that between the two slot size brackets was 3.532 degrees. The absolute values of the angle psi in the upper left and right canine brackets were 2.560 degrees +/- 2.605 degrees, 4.230 degrees +/- 2.817 degrees, 1.260 degrees +/- 0.747 degrees and 2.070 degrees +/- 0.663 degrees respectively, and average differences between them were smaller than that in the other teeth. There was difference between the two kinds of slot size brackets on torque control, and 0.457 2 mm x 0.635 0 mm slot size bracket controls torque better when filled with the same size wire. In this study, the teeth interaction in the same arch probably caused the result that the difference of two slot size brackets on torque control was less than the study results of the theory calculations and material studys before.

  1. Size separation of analytes using monomeric surfactants

    Science.gov (United States)

    Yeung, Edward S.; Wei, Wei

    2005-04-12

    A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

  2. A sub-Mercury-sized exoplanet

    OpenAIRE

    Barclay, Thomas; Ciardi, David; Howard, Andrew W.

    2013-01-01

    Since the discovery of the first exoplanets, it has been known that other planetary systems can look quite unlike our own. Until fairly recently, we have been able to probe only the upper range of the planet size distribution, and, since last year, to detect planets that are the size of Earth or somewhat smaller. Hitherto, no planets have been found that are smaller than those we see in the Solar System. Here we report a planet significantly smaller than Mercury. This tiny planet is the inner...

  3. Compact vs. Exponential-Size LP Relaxations

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.D.; Lancia, G.

    2000-09-01

    In this paper we introduce by means of examples a new technique for formulating compact (i.e. polynomial-size) LP relaxations in place of exponential-size models requiring separation algorithms. In the same vein as a celebrated theorem by Groetschel, Lovasz and Schrijver, we state the equivalence of compact separation and compact optimization. Among the examples used to illustrate our technique, we introduce a new formulation for the Traveling Salesman Problem, whose relaxation we show equivalent to the subtour elimination relaxation.

  4. Correlations Between Degree of Petal Fusion, Leaf Size and Fruit Size: A Case in Syzygium (Myrtaceae

    Directory of Open Access Journals (Sweden)

    PUDJI WIDODO

    2009-07-01

    Full Text Available Syzygium is one of large genera of the flowering plants. In order to simplify the identification, a classification is required, e.g. based on degree of petal fusion, leaf size and fruit size. Due to variations of vegetative and generative characters, a correlation analysis was carried out. The aim of this research is to know the correlation between degree of petal fusion, leaf length and fruit diameter. The result of this research showed that there is positive correlation between those three variables. The increase of leaf size will increase fruit size and petal lobe depth.

  5. Indetermination of particle sizing by laser diffraction in the anomalous size ranges

    Science.gov (United States)

    Pan, Linchao; Ge, Baozhen; Zhang, Fugen

    2017-09-01

    The laser diffraction method is widely used to measure particle size distributions. It is generally accepted that the scattering angle becomes smaller and the angles to the location of the main peak of scattered energy distributions in laser diffraction instruments shift to smaller values with increasing particle size. This specific principle forms the foundation of the laser diffraction method. However, this principle is not entirely correct for non-absorbing particles in certain size ranges and these particle size ranges are called anomalous size ranges. Here, we derive the analytical formulae for the bounds of the anomalous size ranges and discuss the influence of the width of the size segments on the signature of the Mie scattering kernel. This anomalous signature of the Mie scattering kernel will result in an indetermination of the particle size distribution when measured by laser diffraction instruments in the anomalous size ranges. By using the singular-value decomposition method we interpret the mechanism of occurrence of this indetermination in detail and then validate its existence by using inversion simulations.

  6. Genome size, morphological and palynological variations, and ...

    African Journals Online (AJOL)

    The present study compares the morphological, palynologycal and genome size (C-value content) characteristics in the long-styled and short-styled plants in three Linum species, that is, ... The analysis of variance (ANOVA) test performed among the three Linum species showed a significant difference in 2C-value content.

  7. String Theory: Big Problem for Small Size

    Science.gov (United States)

    Sahoo, S.

    2009-01-01

    String theory is the most promising candidate theory for a unified description of all the fundamental forces that exist in nature. It provides a mathematical framework that combines quantum theory with Einstein's general theory of relativity. The typical size of a string is of the order of 10[superscript -33] cm, called the Planck length. But due…

  8. The conditional size premium and intertemporal risk

    DEFF Research Database (Denmark)

    de Oliveira Souza, Thiago

    2018-01-01

    The size premium only appears in states with good expected stock returns as given by several state variables, such as the aggregate book-to-market. The annual premium is 15% when this variable is within the top 33% in historical terms and an insignificant 0.4% otherwise. This renders the uncondit...

  9. Size segregated aerosol mass concentration measurements over ...

    Indian Academy of Sciences (India)

    Mass concentration and mass size distribution of total (composite) aerosols near the surface are essential inputs needed in developing aerosol models for radiative forcing estimation as well as to infer the environment and air quality. Using extensive measurements onboard the oceanographic research vessel, Sagar Kanya ...

  10. Grain size estimation in anisotropic materials

    Czech Academy of Sciences Publication Activity Database

    Saxl, Ivan; Ponížil, P.; Sülleiová, K.

    2005-01-01

    Roč. 482, - (2005), s. 239-242 ISSN 0255-5476 R&D Projects: GA ČR(CZ) GA201/03/0946 Institutional research plan: CEZ:AV0Z10190503 Keywords : 3D grain size * profile count * intercept count Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.399, year: 2005

  11. So, Where Are We with Class Size?

    Science.gov (United States)

    Johnson, Donald P.

    2001-01-01

    Although class-size reductions cannot guarantee better student performance, the Tennessee and Wisconsin experiences, along with other studies, suggest that successful programs share key characteristics: concentration in the primary schooling years, classes with not more than 20 students, greater benefits for urban minority students, and alignment…

  12. Aging and body size in solitary bees

    Science.gov (United States)

    Solitary bees are important pollinators of crops and non-domestic plants. Osmia lignaria is a native, commercially-reared solitary bee used to maximize pollination in orchard crops. In solitary bees, adult body size is extremely variable depending on the nutritional resources available to the develo...

  13. The size effect in metal cutting

    Indian Academy of Sciences (India)

    and when the size of the material removed decreases, the probability of encountering a stress-reducing defect decreases. Since the shear stress and strain in metal cutting is unusually high, discontinuous microcracks usually form on the metal-cutting shear plane. If the material being cut is very brittle, or the compressive ...

  14. Suspended sediment concentration and particle size distribution ...

    Indian Academy of Sciences (India)

    The relationship between SSC and particle size distribution (PSD) were correlated with HMC by using bivariate and multivariate regression models. Proposed models were then selected based on statistical criteria. The results showed high correlation between dissolved and particulate chromium content with efficiency ...

  15. Determination of size distribution using neural networks

    NARCIS (Netherlands)

    Stevens, JH; Nijhuis, JAG; Spaanenburg, L; Mohammadian, M

    1999-01-01

    In this paper we present a novel approach to the estimation of size distributions of grains in water from images. External conditions such as the concentrations of grains in water cannot be controlled. This poses problems for local image analysis which tries to identify and measure single grains.

  16. Size-effects in porous metals

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Tvergaard, Viggo

    The intrinsic size-effect for porous metals is investigated. The analyses are carried out numerically using a finite strain generalization of a higher order strain gradient plasticity model. Results for plane strain growth of cylindrical voids are presented in terms of response curves and curves...

  17. Size-effects in porous metals

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Tvergaard, Viggo

    2007-01-01

    The intrinsic size-effect for porous metals is investigated. The analyses are carried out numerically using a finite strain generalization of a higher order strain gradient plasticity model. Results for plane strain growth of cylindrical voids are presented in terms of response curves and curves...

  18. Does Sibship Size Affect Educational Attainment?

    DEFF Research Database (Denmark)

    Jæger, Mads Meier

    This paper implements a test of the Resource Dilution Hypothesis (RDH) stating that sibship size has a negative causal effect on educational attainment. Most existing studies using conventional methods support the RDH. This paper implements an Instrumental Variable (IV) approach to testing...

  19. Sample size tables for clinical studies

    National Research Council Canada - National Science Library

    Machin, David

    2009-01-01

    ... with sample size software S S S , which we hope will give the user even greater flexibility and easy access to a wide range of designs, and allow design parameters to be tailored more readily to specific problems. Further, as some early phase designs are adaptive in nature and require knowledge of earlier patients' response to determine t...

  20. Preparing size markers for gel electrophoresis.

    Science.gov (United States)

    Nilsen, Timothy W

    2013-12-01

    Here we present two simple methods for preparing radiolabeled size markers for gel electrophoresis. The first procedure describes the generation of an RNA marker ladder by the alkaline hydrolysis of (32)P 5'- or 3'-end-labeled RNA. The second procedure describes the labeling of DNA fragments produced by digestion of pBR322 with the restriction enzyme MspI.

  1. Correlation of Sonographically Determined Renal Sizes with ...

    African Journals Online (AJOL)

    BSA): renal length = 0.8839BSA+ 8.6260, p< 0.001. Thus, patient average renal lengths increased by 0.24cm for each cm of height and 0.88cm for each unit of BSA. This study shows the values of renal sizes in Nigerians, which may be helpful in ...

  2. Sizes of films for medical radiography - 1972

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    This standard covers sizes of film for medical radiography, excluding periapical and occlusal X-ray film (see BS--2585) in both sheet and roll form. The dimensions of cores for film used in roll form, squareness, quantity packaging and marking are also specified. This standard agrees with ISO/R 425.

  3. House Prices, Bubbles and City Size

    NARCIS (Netherlands)

    M.J.P.M. Thissen (Mark); M.J. Burger (Martijn); F.G. van Oort (Frank)

    2010-01-01

    textabstractWe build a theoretical model that relates house price, city size and the expected future growth of demand for housing. Our model combines the Alonso-Mills model on urban economics with insights from financial economics on house prices. Estimating the model for cities in the US, we

  4. Gender based disruptive selection maintains body size ...

    Indian Academy of Sciences (India)

    2014-07-04

    Jul 4, 2014 ... It is possible that the GS males had significantly short life-span owing to their small size and thus released the GL females. Figure 7. Frequency distribution of average (of left and right) wing area of male (red) and (red) female (black) GL flies. The combined plot of the two genders shows a distinctly bi-modal ...

  5. "It's not the size of the ship…"

    DEFF Research Database (Denmark)

    Christiansen, Ask Vest; Gleaves, John

    2013-01-01

    thousands of delegates placed at fabulous venues but where I've only heard about a handful of interesting papers. So, as they say; "It's not the size of the ship, it's the motion of the ocean!" And there were many papers at the INHDR conference that made waves on the doping issue. Quite a few took...

  6. Size variation in Middle Pleistocene humans.

    Science.gov (United States)

    Arsuaga, J L; Carretero, J M; Lorenzo, C; Gracia, A; Martínez, I; Bermúdez de Castro, J M; Carbonell, E

    1997-08-22

    It has been suggested that European Middle Pleistocene humans, Neandertals, and prehistoric modern humans had a greater sexual dimorphism than modern humans. Analysis of body size variation and cranial capacity variation in the large sample from the Sima de los Huesos site in Spain showed instead that the sexual dimorphism is comparable in Middle Pleistocene and modern populations.

  7. Relationship between sonographic umbilical cord size and ...

    African Journals Online (AJOL)

    2014-06-02

    Jun 2, 2014 ... Relationship between sonographic umbilical cord size and gestational age among preg- nant women in Enugu, Nigeria. Eze CU1, Ugwuja MC2, Eze CU3, Agwuna KK2, Ugwu GO4. 1. Department of Medical Radiography and Radiological Sciences, Faculty of Health Sciences and Technology, University.

  8. Size reduction of complex networks preserving modularity

    International Nuclear Information System (INIS)

    Arenas, A; Duch, J; Fernandez, A; Gomez, S

    2007-01-01

    The ubiquity of modular structure in real-world complex networks is the focus of attention in many trials to understand the interplay between network topology and functionality. The best approaches to the identification of modular structure are based on the optimization of a quality function known as modularity. However this optimization is a hard task provided that the computational complexity of the problem is in the non-deterministic polynomial-time hard (NP-hard) class. Here we propose an exact method for reducing the size of weighted (directed and undirected) complex networks while maintaining their modularity. This size reduction allows use of heuristic algorithms that optimize modularity for a better exploration of the modularity landscape. We compare the modularity obtained in several real complex-networks by using the extremal optimization algorithm, before and after the size reduction, showing the improvement obtained. We speculate that the proposed analytical size reduction could be extended to an exact coarse graining of the network in the scope of real-space renormalization

  9. Grain Size Estimation in Anisotropic Materials

    Czech Academy of Sciences Publication Activity Database

    Procházka, J.; Ponížil, P.; Saxl, Ivan

    2008-01-01

    Roč. 568, č. 2 (2008), s. 285-288 ISSN 0255-5476 R&D Projects: GA ČR GA201/06/0302 Institutional research plan: CEZ:AV0Z10190503 Keywords : grain size estimation * anisotropy * planmar sections Subject RIV: JP - Industrial Processing

  10. Size distribution of ions in atmospheric aerosols

    Science.gov (United States)

    Krivácsy, Z.; Molnár, Á.

    The aim of this paper is to present data about the concentration and size distribution of ions in atmospheric aerosol under slightly polluted urban conditions in Hungary. Concentration of inorganic cations (ammonium, sodium, potassium, calcium, magnesium), inorganic anions (sulfate, nitrate, chloride, carbonate) and organic acids (oxalic, malonic, succinic, formic and acetic acid) for 8 particle size range between 0.0625 and 16 μm were determined. As was the case for ammonium, sulfate and nitrate, the organic acids were mostly found in the fine particle size range. Potassium and chloride were rather uniformly distributed between fine and coarse particles. Sodium, calcium, magnesium and carbonate were practically observed in the coarse mode. The results obtained for the summer and the winter half-year were also compared. The mass concentrations were recalculated in equivalents, and the ion balance was found to be reasonable in most cases. Measurement of the pH of the aerosol extracts indicates that the aerosol is acidic in the fine mode, but alkaline in the coarse particle size range.

  11. Size distributions of submicrometer aerosols from cooking

    Energy Technology Data Exchange (ETDEWEB)

    Li, C.S.; Lin, W.H.; Jeng, F.T. (National Taiwan Univ., Taipei (Taiwan, Province of China))

    1993-01-01

    Although gas stove usage varies from country to country, it is still one of the major indoor combustion sources. In order to assess the health effects of using gas stoves, the physical characteristics of the particle emissions from cooking were conducted in a first-floor apartment in the Taipei area. The particle size distributions from scrambling eggs, frying chicken, and cooking soup were measured in the kitchen by a high resolution particle sizer, which could measure the particles in the size range of 0.01 [mu]m to 1 [mu]m. The concentrations of the submicrometer particles increased significantly from 15,000 cm[sup [minus]3] to 150,000 cm[sup [minus]3] during cooking. Additionally, the ultrafine particles constituted 60%--70% of the total submicron aerosols. The changes in the size distributions and the concentrations of the submicrometer aerosols before, during, and after the aerosol generations were compared. On the average, the median diameters of scrambling eggs, frying chicken, cooking soup, and of the background conditions were 40 nm, 50 nm, 30 nm, and 70 nm, respectively. Regarding the surface area-weighted size distributions, the surface median diameters of the four situations were 180 nm, 300 nm, 150 nm, and 220 nm, respectively. Furthermore, the volume median diameters in the conditions mentioned above were almost similar, namely 300--350 nm. 10 refs., 6 figs., 2 tabs.

  12. COCHLEATA controls leaf size and secondary inflorescence ...

    Indian Academy of Sciences (India)

    2012-10-18

    Oct 18, 2012 ... COCHLEATA controls leaf size and secondary inflorescence architecture via negative regulation of UNIFOLIATA (LEAFY ortholog) gene in garden pea Pisum sativum. VISHAKHA SHARMA, SWATI CHAUDHARY, ARVIND KUMAR and SUSHIL KUMAR*. Genetical Genomics Laboratory, National Institute of ...

  13. Scaling the drop size in coflow experiments

    International Nuclear Information System (INIS)

    Castro-Hernandez, E; Gordillo, J M; Gundabala, V; Fernandez-Nieves, A

    2009-01-01

    We perform extensive experiments with coflowing liquids in microfluidic devices and provide a closed expression for the drop size as a function of measurable parameters in the jetting regime that accounts for the experimental observations; this expression works irrespective of how the jets are produced, providing a powerful design tool for this type of experiments.

  14. Scaling the drop size in coflow experiments

    Energy Technology Data Exchange (ETDEWEB)

    Castro-Hernandez, E; Gordillo, J M [Area de Mecanica de Fluidos, Universidad de Sevilla, Avenida de los Descubrimientos s/n, 41092 Sevilla (Spain); Gundabala, V; Fernandez-Nieves, A [School of Physics, Georgia Institute of Technology, Atlanta, GA 30332 (United States)], E-mail: jgordill@us.es

    2009-07-15

    We perform extensive experiments with coflowing liquids in microfluidic devices and provide a closed expression for the drop size as a function of measurable parameters in the jetting regime that accounts for the experimental observations; this expression works irrespective of how the jets are produced, providing a powerful design tool for this type of experiments.

  15. Size-change termination and bound analysis

    DEFF Research Database (Denmark)

    Avery, James Emil

    2006-01-01

    Despite its simplicity, the size-change termination principle, presented by Lee, Jones and Ben-Amram in [LJB01], is surprisingly strong and is able to show termination for a large class of programs. A significant limitation for its use, however, is the fact that the SCT requires data types to be ...

  16. Droplet size distribution in condensing flow

    NARCIS (Netherlands)

    Sidin, R.S.R.

    2009-01-01

    In this thesis, the problem of predicting the droplet size distribution in condensing ow is in- vestigated numerically and analytically. The work focuses on two types of problems: one where condensation occurs during the transonic expansion of a vapor-mixture, and a second one where condensation

  17. Body-size evolution on islands: are adult size variations in tiger snakes a nonadaptive consequence of selection on birth size?

    Science.gov (United States)

    Aubret, Fabien

    2012-06-01

    Mean adult size has been used as the traditional measure of body size to explain trends of insular gigantism and dwarfism in a wide array of taxa. However, patterns of variation in body size at birth have received surprisingly little attention, leaving open the possibility that adult body-size differences are nonadaptive consequences of selection acting on neonate body size. Here I used an empirical and correlative approach to test this hypothesis in a mosaic of 12 island and mainland snake populations in Australia. Data collected on 597 adult and 1,084 neonate tiger snakes showed that (1) both adult and neonate mean body sizes varied strongly across populations; (2) prey diversity and size convincingly explained birth-size variations: birth size-notably, gape size-correlated with prey size; (3) neonate snout-vent length was significantly correlated with neonate gape size; and (4) neonate snout-vent length was significantly correlated with adult snout-vent length. Postnatal growth rates recorded under common-garden conditions differed across populations and were correlated with mean prey size. These data collectively suggest that (1) prey size is the main driver for the evolution of body size at birth in gape-limited predators, (2) adult size variations may reflect selective forces acting on earlier life stages, and (3) adult size variations may also reflect resource availability during ontogeny (notably, prey diversity).

  18. Vibro-spring particle size distribution analyser

    International Nuclear Information System (INIS)

    Patel, Ketan Shantilal

    2002-01-01

    This thesis describes the design and development of an automated pre-production particle size distribution analyser for particles in the 20 - 2000 μm size range. This work is follow up to the vibro-spring particle sizer reported by Shaeri. In its most basic form, the instrument comprises a horizontally held closed coil helical spring that is partly filled with the test powder and sinusoidally vibrated in the transverse direction. Particle size distribution data are obtained by stretching the spring to known lengths and measuring the mass of the powder discharged from the spring's coils. The size of the particles on the other hand is determined from the spring 'intercoil' distance. The instrument developed by Shaeri had limited use due to its inability to measure sample mass directly. For the device reported here, modifications are made to the original configurations to establish means of direct sample mass measurement. The feasibility of techniques for measuring the mass of powder retained within the spring are investigated in detail. Initially, the measurement of mass is executed in-situ from the vibration characteristics based on the spring's first harmonic resonant frequency. This method is often erratic and unreliable due to the particle-particle-spring wall interactions and the spring bending. An much more successful alternative is found from a more complicated arrangement in which the spring forms part of a stiff cantilever system pivoted along its main axis. Here, the sample mass is determined in the 'static mode' by monitoring the cantilever beam's deflection following the wanton termination of vibration. The system performance has been optimised through the variations of the mechanical design of the key components and the operating procedure as well as taking into account the effect of changes in the ambient temperature on the system's response. The thesis also describes the design and development of the ancillary mechanisms. These include the pneumatic

  19. Windows in Low Energy Houses. Size Matters

    Energy Technology Data Exchange (ETDEWEB)

    Persson, Mari-Louise

    2004-06-01

    A generally accepted way of building passive houses has been to have small windows facing north and a large glass facade to the south. This is to minimize losses on the north side while gaining as much solar heat as possible on the south. In spring 2001, twenty terraced houses were built outside Goeteborg partly in this way. The indoor temperature is kept at a comfortable level by passive methods, using solar gains and internal gains from household appliances and occupants. Heat losses are very low, since the building envelope is well insulated and since modern coated triple-glazed windows have been installed. The purpose of this work is to investigate how decreasing the window size facing south and increasing the window size facing north in low energy houses will influence the energy consumption and maximum power needed to keep the indoor temperature between 23 and 26 deg C. Different climates and orientations have been investigated and so have the influence of occupancy and window type. A dynamic building simulation tool, DEROB, has been used and the simulations indicate an extremely low energy demand for the houses. The results show that the size of the energy efficient windows does not have a major influence on the heating demand in winter, but is of relevant signification looking at the cooling need in summer. This indicates that instead of the traditional technique of building passive houses it is possible to enlarge the window area facing north and get better lighting conditions. To decrease the energy need for cooling, there is an optimal window size facing south that is smaller than the original size of the investigated buildings.

  20. Size-dependent mortality rate profiles.

    Science.gov (United States)

    Roa-Ureta, Ruben H

    2016-08-07

    Knowledge of mortality rates is crucial to the understanding of population dynamics in populations of free-living fish and invertebrates in marine and freshwater environments, and consequently to sustainable resource management. There is a well developed theory of population dynamics based on age distributions that allow direct estimation of mortality rates. However, for most cases the aging of individuals is difficult or age distributions are not available for other reasons. The body size distribution is a widely available alternative although the theory underlying the formation of its shape is more complicated than in the case of age distributions. A solid theory of the time evolution of a population structured by any physiological variable has been developed in 1960s and 1970s by adapting the Hamilton-Jacobi formulation of classical mechanics, and equations to estimate the body size-distributed mortality profile have been derived for simple cases. Here I extend those results with regards to the size-distributed mortality profile to complex cases of non-stationary populations, individuals growing according to a generalised growth model and seasonally patterned recruitment pulses. I apply resulting methods to two cases in the marine environment, a benthic crustacean population that was growing during the period of observation and whose individuals grow with negative acceleration, and a sea urchin coastal population that is undergoing a stable cycle of two equilibrium points in population size whose individuals grow with varying acceleration that switches sign along the size range. The extension is very general and substantially widens the applicability of the theory. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Sample size for morphological traits of pigeonpea

    Directory of Open Access Journals (Sweden)

    Giovani Facco

    2015-12-01

    Full Text Available The objectives of this study were to determine the sample size (i.e., number of plants required to accurately estimate the average of morphological traits of pigeonpea (Cajanus cajan L. and to check for variability in sample size between evaluation periods and seasons. Two uniformity trials (i.e., experiments without treatment were conducted for two growing seasons. In the first season (2011/2012, the seeds were sown by broadcast seeding, and in the second season (2012/2013, the seeds were sown in rows spaced 0.50 m apart. The ground area in each experiment was 1,848 m2, and 360 plants were marked in the central area, in a 2 m × 2 m grid. Three morphological traits (e.g., number of nodes, plant height and stem diameter were evaluated 13 times during the first season and 22 times in the second season. Measurements for all three morphological traits were normally distributed and confirmed through the Kolmogorov-Smirnov test. Randomness was confirmed using the Run Test, and the descriptive statistics were calculated. For each trait, the sample size (n was calculated for the semiamplitudes of the confidence interval (i.e., estimation error equal to 2, 4, 6, ..., 20% of the estimated mean with a confidence coefficient (1-? of 95%. Subsequently, n was fixed at 360 plants, and the estimation error of the estimated percentage of the average for each trait was calculated. Variability of the sample size for the pigeonpea culture was observed between the morphological traits evaluated, among the evaluation periods and between seasons. Therefore, to assess with an accuracy of 6% of the estimated average, at least 136 plants must be evaluated throughout the pigeonpea crop cycle to determine the sample size for the traits (e.g., number of nodes, plant height and stem diameter in the different evaluation periods and between seasons. 

  2. Remote Laser Diffraction Particle Size Distribution Analyzer

    Energy Technology Data Exchange (ETDEWEB)

    Batcheller, Thomas Aquinas; Huestis, Gary Michael; Bolton, Steven Michael

    2001-03-01

    In support of a radioactive slurry sampling and physical characterization task, an “off-the-shelf” laser diffraction (classical light scattering) particle size analyzer was utilized for remote particle size distribution (PSD) analysis. Spent nuclear fuel was previously reprocessed at the Idaho Nuclear Technology and Engineering Center (INTEC—formerly recognized as the Idaho Chemical Processing Plant) which is on DOE’s INEEL site. The acidic, radioactive aqueous raffinate streams from these processes were transferred to 300,000 gallon stainless steel storage vessels located in the INTEC Tank Farm area. Due to the transfer piping configuration in these vessels, complete removal of the liquid can not be achieved. Consequently, a “heel” slurry remains at the bottom of an “emptied” vessel. Particle size distribution characterization of the settled solids in this remaining heel slurry, as well as suspended solids in the tank liquid, is the goal of this remote PSD analyzer task. A Horiba Instruments Inc. Model LA-300 PSD analyzer, which has a 0.1 to 600 micron measurement range, was modified for remote application in a “hot cell” (gamma radiation) environment. This technology provides rapid and simple PSD analysis, especially down in the fine and microscopic particle size regime. Particle size analysis of these radioactive slurries down in this smaller range was not previously achievable—making this technology far superior than the traditional methods used. Successful acquisition of this data, in conjunction with other characterization analyses, provides important information that can be used in the myriad of potential radioactive waste management alternatives.

  3. Correlation Between Echinoidea Size and Threat Level

    Science.gov (United States)

    Bakshi, S.; Lee, A.; Heim, N.; Payne, J.

    2017-12-01

    Echinoidea (or sea urchins), are small, spiny, globular, animals that populate the seafloors of nearly the entire planet. Echinoidea have existed on Earth since the Ordovician period, and from their archaic origin there is much to be learned about the relationship between Echinoidea body size and how it affects the survivability of the individual. The goal of this project is to determine how Echinoidea dimensions such as body volume, area, and length compare across extinct and extant species by plotting Echinoidea data in R. We will use stratigraphic data as a source to find which species of sea urchin from our data is extinct. We will then create three sets of three histograms of the size data for each type of measurement. One set will include histograms for sea urchin length, area, and volume. The other set will include histograms for extinct sea urchin length, area, and volume. The last set will include histograms for extant sea urchin length, area, and volume. Our data showed that extant sea urchins had a larger size, and extinct sea urchins were smaller. Our length data showed that the average length of all sea urchins were 54.95791 mm, the average length of extinct sea urchins were 51.0337 mm, and the average length of extant sea urchins were 66.12774 mm. There is a generally increasing trend of size over time, except for a small outlier about 350 million years ago, where echinoderm extinction selected towards larger species and biovolume was abnormally high. Our data also showed that over the past 200 million years, echinoderm extinction selectivity drove slightly smaller sea urchins towards extinction, further supporting the idea that a larger size was and still is advantageous for echinoderms.

  4. The stochastic transition from size dependent to size independent yield strength in metallic glasses

    Science.gov (United States)

    Li, F. C.; Wang, S.; He, Q. F.; Zhang, H.; Sun, B. A.; Lu, Y.; Yang, Y.

    2017-12-01

    It has been an enduring and heated debate whether the yield strength of metallic glasses (MGs) is size dependent or size independent. In this work, we first develop a micromechanical model by taking into account the stochasticity for shear band initiation in microcompression. Our modeling is subsequently verified through the extensive in-situ and ex-situ microcompression experiments. Through the efforts of combined experiments and modeling, we show a size-controlled stochastic transition from the size dependent to the size independent yield strength in the MG micropillars. Such a stochastic transition is featured with a strong fluctuation in the measured yield strengths when the micropillar size is near an intrinsic length scale which varies with the chemical composition of MGs. In contrast, such a size-controlled transition appear deterministic with little data scattering in tension. At the fundamental level, our results unfold a size dependent shear band initiation process in MGs, which may be applicable to other amorphous materials of technological importance.

  5. The causal effect of board size in the performance of small and medium-sized firms

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Kongsted, Hans Christian; Meisner Nielsen, Kasper

    2008-01-01

    Empirical studies of large publicly traded firms have shown a robust negative relationship between board size and firm performance. The evidence on small and medium-sized firms is less clear; we show that existing work has been incomplete in analyzing the causal relationship due to weak...

  6. The size of the visual size cue used for programming manipulative forces during precision grip.

    Science.gov (United States)

    Mon-Williams, M; Murray, A H

    2000-12-01

    We used a perturbation technique to quantify the contribution of visual size cues to the programming of target force when lifting an object. Our results indicate that the nervous system attaches a reasonable weight to visual size cues when programming the target grip force for a novel object. In a subsequent lift of the same object, however, the confidence attached to the visual size cue fell dramatically. It is not clear whether the decrease in the use of size information was accelerated by the presence of a cue conflict or whether the fall represents the normal shift towards the use of a memory-based representation for programming grip force. In a second experiment, we used the "size-weight illusion" to explore the relationship between the verbal report of an object's weight and the programming of the grip and load force. We found that erroneous motor programming (as indexed by a number of measures) was neither necessary nor sufficient for the size-weight illusion to occur. These findings call for a re-evaluation of a previous explanation for the size-weight illusion. We suggest that the illusion arises because the cognitive system attempts to rationalise the fact that objects of apparently equal density but different size feel as if they have the same weight.

  7. Sizing for ethnicity in multi-cultural societies: development of size

    African Journals Online (AJOL)

    user

    71 427 3708 ..... girth, there is an inconclusive trend. Both the bust girth and the hip girth have weak correlation with most of the ..... Clothing appearance and fit: Science and. Sizing for ethnicity in multi-cultural societies: development of size ...

  8. Sample Size Calculations for Precise Interval Estimation of the Eta-Squared Effect Size

    Science.gov (United States)

    Shieh, Gwowen

    2015-01-01

    Analysis of variance is one of the most frequently used statistical analyses in the behavioral, educational, and social sciences, and special attention has been paid to the selection and use of an appropriate effect size measure of association in analysis of variance. This article presents the sample size procedures for precise interval estimation…

  9. Causality in Statistical Power: Isomorphic Properties of Measurement, Research Design, Effect Size, and Sample Size

    Directory of Open Access Journals (Sweden)

    R. Eric Heidel

    2016-01-01

    Full Text Available Statistical power is the ability to detect a significant effect, given that the effect actually exists in a population. Like most statistical concepts, statistical power tends to induce cognitive dissonance in hepatology researchers. However, planning for statistical power by an a priori sample size calculation is of paramount importance when designing a research study. There are five specific empirical components that make up an a priori sample size calculation: the scale of measurement of the outcome, the research design, the magnitude of the effect size, the variance of the effect size, and the sample size. A framework grounded in the phenomenon of isomorphism, or interdependencies amongst different constructs with similar forms, will be presented to understand the isomorphic effects of decisions made on each of the five aforementioned components of statistical power.

  10. Wolves adapt territory size, not pack size to local habitat quality.

    Science.gov (United States)

    Kittle, Andrew M; Anderson, Morgan; Avgar, Tal; Baker, James A; Brown, Glen S; Hagens, Jevon; Iwachewski, Ed; Moffatt, Scott; Mosser, Anna; Patterson, Brent R; Reid, Douglas E B; Rodgers, Arthur R; Shuter, Jen; Street, Garrett M; Thompson, Ian D; Vander Vennen, Lucas M; Fryxell, John M

    2015-09-01

    1. Although local variation in territorial predator density is often correlated with habitat quality, the causal mechanism underlying this frequently observed association is poorly understood and could stem from facultative adjustment in either group size or territory size. 2. To test between these alternative hypotheses, we used a novel statistical framework to construct a winter population-level utilization distribution for wolves (Canis lupus) in northern Ontario, which we then linked to a suite of environmental variables to determine factors influencing wolf space use. Next, we compared habitat quality metrics emerging from this analysis as well as an independent measure of prey abundance, with pack size and territory size to investigate which hypothesis was most supported by the data. 3. We show that wolf space use patterns were concentrated near deciduous, mixed deciduous/coniferous and disturbed forest stands favoured by moose (Alces alces), the predominant prey species in the diet of wolves in northern Ontario, and in proximity to linear corridors, including shorelines and road networks remaining from commercial forestry activities. 4. We then demonstrate that landscape metrics of wolf habitat quality - projected wolf use, probability of moose occupancy and proportion of preferred land cover classes - were inversely related to territory size but unrelated to pack size. 5. These results suggest that wolves in boreal ecosystems alter territory size, but not pack size, in response to local variation in habitat quality. This could be an adaptive strategy to balance trade-offs between territorial defence costs and energetic gains due to resource acquisition. That pack size was not responsive to habitat quality suggests that variation in group size is influenced by other factors such as intraspecific competition between wolf packs. © 2015 The Authors. Journal of Animal Ecology © 2015 British Ecological Society.

  11. Beliefs about penis size: validation of a scale for men ashamed about their penis size.

    Science.gov (United States)

    Veale, David; Eshkevari, Ertimiss; Read, Julie; Miles, Sarah; Troglia, Andrea; Phillips, Rachael; Echeverria, Lina Maria Carmona; Fiorito, Chiara; Wylie, Kevan; Muir, Gordon

    2014-01-01

    No measures are available for understanding beliefs in men who experience shame about the perceived size of their penis. Such a measure might be helpful for treatment planning, and measuring outcome after any psychological or physical intervention. Our aim was to validate a newly developed measure called the Beliefs about Penis Size Scale (BAPS). One hundred seventy-three male participants completed a new questionnaire consisting of 18 items to be validated and developed into the BAPS, as well as various other standardized measures. A urologist also measured actual penis size. The BAPS was validated against six psychosexual self-report questionnaires as well as penile size measurements. Exploratory factor analysis reduced the number of items in the BAPS from 18 to 10, which was best explained by one factor. The 10-item BAPS had good internal consistency and correlated significantly with measures of depression, anxiety, body image quality of life, social anxiety, erectile function, overall satisfaction, and the importance attached to penis size. The BAPS was not found to correlate with actual penis size. It was able to discriminate between those who had concerns or were dissatisfied about their penis size and those who were not. This is the first study to develop a scale for measurement of beliefs about penis size. It may be used as part of an assessment for men who experience shame about the perceived size of their penis and as an outcome measure after treatment. The BAPS measures various manifestations of masculinity and shame about their perceived penis size including internal self-evaluative beliefs; negative evaluation by others; anticipated consequences of a perceived small penis, and extreme self-consciousness. © 2013 International Society for Sexual Medicine.

  12. The assessment of size in fossil felidae

    Directory of Open Access Journals (Sweden)

    O' Regan, H.

    2002-04-01

    Full Text Available Estimations of body size in fossil vertebrates depend on establishing the relationships between body mass, overall length or some measure of stature and measurements taken on skeletal elements in living relatives or close proxies. However, most osteological collections lack information on body size for individual specimens, and published investigations usually fa11 back on summary data derived from the literature to plot against measurements taken directly on the skeletal material. The utility of such approaches beyond very general indications of size is open to question. In an effort to reduce these problems we attempt to establish some objective basis for using skeletal elements for the purpose of size estimation in the larger Felidae of the genus Panthera, using data for the jaguar, Panthera onca. We show that cranial length offers a good indication of overall size in the living animal, and that various other cranial dimensions correlate closely with that measurement, while individual teeth, despite their frequent occurrence in assemblages, show a looser relationship and therefore appear less useful for size estimations of fossil material than has been thought.Las estimaciones de la talla corporal en vertebrados fósiles depende de las relaciones establecidas entre el peso corporal, la longitud total o alguna medida de estatura tomada de los elementos esqueléticos de animales actuales emparentados o muy afines. Sin embargo, en muchas colecciones osteológicas falta información sobre la talla corporal de los ejemplares, de forma que las investigaciones publicadas usualmente recurren a datos sintetizados de la literatura que se relacionan con medidas tomadas directamente del material esquelético. La utilidad de estas aproximaciones más allá de indicaciones generales sobre la talla es discutible. En un esfuerzo de minimizar estos problemas intentamos establecer bases objetivas para el uso de los elementos esqueléticos con el propósito de

  13. Comparison of fish-community size spectra based on length ...

    African Journals Online (AJOL)

    Estimates of fish-community size spectra are promising indicators of the impact of fishing on fish assemblages. Size spectra consist of logarithmic graphs of abundance plotted against fish body size. Size spectra may either be constructed from length frequency data or estimated from the mean sizes and abundances of the ...

  14. INITIAL PLANETESIMAL SIZES AND THE SIZE DISTRIBUTION OF SMALL KUIPER BELT OBJECTS

    Energy Technology Data Exchange (ETDEWEB)

    Schlichting, Hilke E. [UCLA, Department of Earth and Space Science, 595 Charles E. Young Drive East, Los Angeles, CA 90095 (United States); Fuentes, Cesar I.; Trilling, David E., E-mail: hilke@ucla.edu [Department of Physics and Astronomy, Northern Arizona University, P.O. Box 6010, Flagstaff, AZ 86011 (United States)

    2013-08-01

    The Kuiper Belt is a remnant from the early solar system and its size distribution contains many important constraints that can be used to test models of planet formation and collisional evolution. We show, by comparing observations with theoretical models, that the observed Kuiper Belt size distribution is well matched by coagulation models, which start with an initial planetesimal population with radii of about 1 km, and subsequent collisional evolution. We find that the observed size distribution above R {approx} 30 km is primordial, i.e., it has not been modified by collisional evolution over the age of the solar system, and that the size distribution below R {approx} 30 km has been modified by collisions and that its slope is well matched by collisional evolution models that use published strength laws. We investigate in detail the resulting size distribution of bodies ranging from 0.01 km to 30 km and find that its slope changes several times as a function of radius before approaching the expected value for an equilibrium collisional cascade of material strength dominated bodies for R {approx}< 0.1 km. Compared to a single power-law size distribution that would span the whole range from 0.01 km to 30 km, we find in general a strong deficit of bodies around R {approx} 10 km and a strong excess of bodies around 2 km in radius. This deficit and excess of bodies are caused by the planetesimal size distribution left over from the runaway growth phase, which left most of the initial mass in small planetesimals while only a small fraction of the total mass is converted into large protoplanets. This excess mass in small planetesimals leaves a permanent signature in the size distribution of small bodies that is not erased after 4.5 Gyr of collisional evolution. Observations of the small Kuiper Belt Object (KBO) size distribution can therefore test if large KBOs grew as a result of runaway growth and constrained the initial planetesimal sizes. We find that results from

  15. Heart size in new born infants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soo Won; Yu, Yun Jeong; Chung, Hye Kyung [Eul-ji General Hospital, Seoul (Korea, Republic of)

    1985-10-15

    Cardiac size of 291 new-bone infants was measured using the method illustrated on Fig 1. Among the 291 infants, 53 were asphyxiated, and asphyxia was only regarded from Apgar score below 6 on 1 min. and 5 min. Remaining 238 infants were normal, and classified to group with lung abnormalities and without lung abnormalities on chest A-P film. The results are as follows; 1. The average CTR. of normal group was 52.37. (C/T1; 54.89, C/T2; 49.43, C/T3; 49.15, C/T4;55.97) 2. The average CTR. of asphyxiated group was 54.91 (C/T1; 57.13, C/T2; 51.69, C/T3; 51.94, C/T4;58.25) 3. Consequently, asphyxiated infants revealed larger cardiac size than normal infant group.

  16. Genome size differences in Hyalella cryptic species.

    Science.gov (United States)

    Vergilino, Roland; Dionne, Kaven; Nozais, Christian; Dufresne, France; Belzile, Claude

    2012-02-01

    The Hyalella azteca (Saussure) complex includes numerous amphipod cryptic species in freshwater habitats in America as revealed by DNA barcoding surveys. Two ecomorphs (small and large) have evolved numerous times in this complex. Few phenotypic criteria have been found to differentiate between the numerous species of this complex. The present study aims to explore genome size differences between some species of the H. azteca complex co-occurring in a Canadian boreal lake using flow cytometry. Nuclear DNA content was estimated for 50 individuals belonging to six COI haplotypes corresponding to four provisional species of the H. azteca complex. Species from the large ecomorph had C-values significantly larger than species from the small ecomorph, whereas slight differences were found among species of the small ecomorph. These differences in genome sizes might be linked to ecological and physiological differences among species of the H. azteca complex.

  17. A Size-based Ecosystem Model

    DEFF Research Database (Denmark)

    Ravn-Jonsen, Lars

     Ecosystem Management requires models that can link the ecosystem level to the operation level. This link can be created by an ecosystem production model. Because the function of the individual fish in the marine ecosystem, seen in trophic context, is closely related to its size, the model groups...... fish according to size. The model summarises individual predation events into ecosystem level properties, and thereby uses the law of conversation of mass as a framework. This paper provides the background, the conceptual model, basic assumptions, integration of fishing activities, mathematical...... the predator--prey interaction, (ii) mass balance in the predator--prey allocation, and (iii) mortality and somatic growth as a consequence of the predator--prey allocation. By incorporating additional assumptions, the model can be extended to other dimensions of the ecosystem, for example, space or species...

  18. Dynamically variable spot size laser system

    Science.gov (United States)

    Gradl, Paul R. (Inventor); Hurst, John F. (Inventor); Middleton, James R. (Inventor)

    2012-01-01

    A Dynamically Variable Spot Size (DVSS) laser system for bonding metal components includes an elongated housing containing a light entry aperture coupled to a laser beam transmission cable and a light exit aperture. A plurality of lenses contained within the housing focus a laser beam from the light entry aperture through the light exit aperture. The lenses may be dynamically adjusted to vary the spot size of the laser. A plurality of interoperable safety devices, including a manually depressible interlock switch, an internal proximity sensor, a remotely operated potentiometer, a remotely activated toggle and a power supply interlock, prevent activation of the laser and DVSS laser system if each safety device does not provide a closed circuit. The remotely operated potentiometer also provides continuous variability in laser energy output.

  19. Smaller sized reactors can be economically attractive

    International Nuclear Information System (INIS)

    Carelli, M.D.; Petrovic, B.; Mycoff, C.W.; Trucco, P.; Ricotti, M.E.; Locatelli, G.

    2007-01-01

    Smaller size reactors are going to be an important component of the worldwide nuclear renaissance. However, a misguided interpretation of the economy of scale would label these reactors as not economically competitive with larger plants because of their allegedly higher capital cost (dollar/kWe). Economy of scale does apply only if the considered designs are similar, which is not the case here. This paper identifies and briefly discusses the various factors which, beside size (power produced), contribute to determining the capital cost of smaller reactors and provides a preliminary evaluation for a few of these factors. When they are accounted for, in a set of realistic and comparable configurations, the final capital costs of small and large plants are practically equivalent. The Iris reactor is used as the example of smaller reactors, but the analysis and conclusions are applicable to the whole spectrum of small nuclear plants. (authors)

  20. The optimal size for biogas plants

    Energy Technology Data Exchange (ETDEWEB)

    Walla, C.; Schneeberger, W. [Department of Economics and Social Sciences, Institute of Agricultural and Forestry Economics, University of Natural Resources and Applied Life Sciences Vienna, Gregor-Mendel-Strasse 33, 1180 Vienna (Austria)

    2008-06-15

    The costs of biogas and electricity production from maize silage in relation to plant size are investigated in this paper. A survey of manufacturers' engineering data was conducted to derive a reliable relationship between the capacity of a combined heat and power (CHP) unit and its electrical efficiency. Then a model was developed to derive cost curves for the unit costs of biogas and electricity production and for the transport costs for maize silage and biogas slurry. The least-cost plant capacity depends to a great extent on the local availability of silage maize, and ranges in the model calculations from 575 to 1150 kW{sub el}. Finally, the paper deals with the optimum operating plant size due to the investment support available and the graduated tariff for green electricity in Austria. (author)

  1. Adaptive Dynamics of Regulatory Networks: Size Matters

    Directory of Open Access Journals (Sweden)

    Martinetz Thomas

    2009-01-01

    Full Text Available To accomplish adaptability, all living organisms are constructed of regulatory networks on different levels which are capable to differentially respond to a variety of environmental inputs. Structure of regulatory networks determines their phenotypical plasticity, that is, the degree of detail and appropriateness of regulatory replies to environmental or developmental challenges. This regulatory network structure is encoded within the genotype. Our conceptual simulation study investigates how network structure constrains the evolution of networks and their adaptive abilities. The focus is on the structural parameter network size. We show that small regulatory networks adapt fast, but not as good as larger networks in the longer perspective. Selection leads to an optimal network size dependent on heterogeneity of the environment and time pressure of adaptation. Optimal mutation rates are higher for smaller networks. We put special emphasis on discussing our simulation results on the background of functional observations from experimental and evolutionary biology.

  2. Buffer sizing for multi-hop networks

    KAUST Repository

    Shihada, Basem

    2014-01-28

    A cumulative buffer may be defined for an interference domain in a wireless mesh network and distributed among nodes in the network to maintain or improve capacity utilization of network resources in the interference domain without increasing packet queuing delay times. When an interference domain having communications links sharing resources in a network is identified, a cumulative buffer size is calculated. The cumulative buffer may be distributed among buffers in each node of the interference domain according to a simple division or according to a cost function taking into account a distance of the communications link from the source and destination. The network may be monitored and the cumulative buffer size recalculated and redistributed when the network conditions change.

  3. School Size, Achievement, and Achievement Gaps

    Directory of Open Access Journals (Sweden)

    Bradley J. McMillen

    2004-10-01

    Full Text Available In order to examine the relationship between school size and achievement, a study was conducted using longitudinal achievement data from North Carolina for three separate cohorts of public school students (one elementary, one middle and one high school. Results revealed several interactions between size and student characteristics, all of which indicated that the achievement gaps typically existing between certain subgroups (i.e., more versus less-advantaged, lower versus higher-achieving were larger in larger schools. Results varied across the grade level cohorts and across subjects, but in general effects were more common in mathematics than in reading, and were more pronounced at the high school level. Study results are discussed in the context of educational equity and cost-effectiveness.

  4. Hydrodynamic size and charge of polyelectrolyte complexes.

    Science.gov (United States)

    Böhme, Ute; Scheler, Ulrich

    2007-07-26

    Polyelectrolyte complexes have a wide range of applications for surface modification and flocculation and sorption of organic molecules from solutions. As an example, complexes between poly(diallyl dimethyl ammonium chloride) and poly(styrene sulfonate) have been investigated by diffusion and electrophoresis NMR. The formation of primary or soluble complexes is monitored. The hydrodynamic size is characterized by the hydrodynamic radius, calculated from the diffusion coefficient determined by pulsed field gradient NMR. In the combination with electrophoresis NMR, the effective charge of the molecules and complexes is determined. The hydrodynamic size of the primary complex is smaller than that of the pure polyelectrolyte of the larger molecular weight, in the present case poly(styrene sulfonate), in solution, since charges are compensated by the oppositely charged polyelectrolyte and hence the repelling forces diminish. The effective charge of the complexes is drastically reduced.

  5. CLUSTER DYNAMICS LARGELY SHAPES PROTOPLANETARY DISK SIZES

    Energy Technology Data Exchange (ETDEWEB)

    Vincke, Kirsten; Pfalzner, Susanne, E-mail: kvincke@mpifr-bonn.mpg.de [Max Planck Institute for Radio Astronomy, Auf dem Hügel 69, D-53121 Bonn (Germany)

    2016-09-01

    To what degree the cluster environment influences the sizes of protoplanetary disks surrounding young stars is still an open question. This is particularly true for the short-lived clusters typical for the solar neighborhood, in which the stellar density and therefore the influence of the cluster environment change considerably over the first 10 Myr. In previous studies, the effect of the gas on the cluster dynamics has often been neglected; this is remedied here. Using the code NBody6++, we study the stellar dynamics in different developmental phases—embedded, expulsion, and expansion—including the gas, and quantify the effect of fly-bys on the disk size. We concentrate on massive clusters (M {sub cl} ≥ 10{sup 3}–6 ∗ 10{sup 4} M {sub Sun}), which are representative for clusters like the Orion Nebula Cluster (ONC) or NGC 6611. We find that not only the stellar density but also the duration of the embedded phase matters. The densest clusters react fastest to the gas expulsion and drop quickly in density, here 98% of relevant encounters happen before gas expulsion. By contrast, disks in sparser clusters are initially less affected, but because these clusters expand more slowly, 13% of disks are truncated after gas expulsion. For ONC-like clusters, we find that disks larger than 500 au are usually affected by the environment, which corresponds to the observation that 200 au-sized disks are common. For NGC 6611-like clusters, disk sizes are cut-down on average to roughly 100 au. A testable hypothesis would be that the disks in the center of NGC 6611 should be on average ≈20 au and therefore considerably smaller than those in the ONC.

  6. Software used to size the safety devices

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    To avoid mistakes during the calculation, CEA/SBT has decided to write a software that take into account all the situations it is possible to encountered (subcritical state, supercritical state, …). The goal is to permit to the engineer in charge of a cryostat manufacturing to perform this calculation; he is the only person able to do the accidental analysis which is fundamental for the sizing of the safety device. The software performed will be presented.

  7. THE EVOLUTION OF SPERM SIZE IN BIRDS.

    Science.gov (United States)

    Briskie, James V; Montgomerie, Robert; Birkhead, Tim R

    1997-06-01

    Sperm size varies enormously among species, but the reasons for this variation remain obscure. Since it has been suggested that swimming velocity increases with sperm length, earlier studies proposed longer (and therefore faster) sperm are advantageous under conditions of intense sperm competition. Nonetheless, previous work has been equivocal, perhaps because the intensity of sperm competition was measured indirectly. DNA profiling now provides a more direct measure of the number of offspring sired by extrapair males, and thus a more direct method of assessing the potential for sperm competition. Using a sample of 21 species of passerine birds for which DNA profiling data were available, we found a positive relation between sperm length and the degree of extrapair paternity. A path analysis, however, revealed that this relationship arises only indirectly through the positive relationship between the rate of extrapair paternity and length of sperm storage tubules (SSTs) in the female. As sperm length is correlated positively with SST length, an increase in the intensity of sperm competition leads to an increase in sperm length only through its effect on SST length. Why females vary SST length with the intensity of sperm competition is not clear, but one possibility is that it increases female control over how sperm are used in fertilization. Males, in turn, may respond on an evolutionary time scale to changes in SST size by increasing sperm length to prevent displacement from rival sperm. Previous theoretical analyses predicting that sperm size should decrease as sperm competition becomes more intense were not supported by our findings. We suggest that future models of sperm-size evolution consider not only the role of sperm competition, but also how female control and manipulation of ejaculates after insemination selects for different sperm morphologies. © 1997 The Society for the Study of Evolution.

  8. Los Alamos transuranic waste size reduction facility

    International Nuclear Information System (INIS)

    Briesmeister, A.; Harper, J.; Reich, B.; Warren, J.L.

    1982-01-01

    To facilitate disposal of transuranic (TRU) waste, Los Alamos National Laboratory designed and constructed the Size Reduction Facility (SRF) during the period 1977 to 1981. This report summarizes the engineering development, installation, and early test operations of the SRF. The facility incorporates a large stainless steel enclosure fitted with remote handling and cutting equipment to obtain an estimated 4:1 volume reduction of gloveboxes and other bulky metallic wastes

  9. Predicting sample size required for classification performance

    Directory of Open Access Journals (Sweden)

    Figueroa Rosa L

    2012-02-01

    Full Text Available Abstract Background Supervised learning methods need annotated data in order to generate efficient models. Annotated data, however, is a relatively scarce resource and can be expensive to obtain. For both passive and active learning methods, there is a need to estimate the size of the annotated sample required to reach a performance target. Methods We designed and implemented a method that fits an inverse power law model to points of a given learning curve created using a small annotated training set. Fitting is carried out using nonlinear weighted least squares optimization. The fitted model is then used to predict the classifier's performance and confidence interval for larger sample sizes. For evaluation, the nonlinear weighted curve fitting method was applied to a set of learning curves generated using clinical text and waveform classification tasks with active and passive sampling methods, and predictions were validated using standard goodness of fit measures. As control we used an un-weighted fitting method. Results A total of 568 models were fitted and the model predictions were compared with the observed performances. Depending on the data set and sampling method, it took between 80 to 560 annotated samples to achieve mean average and root mean squared error below 0.01. Results also show that our weighted fitting method outperformed the baseline un-weighted method (p Conclusions This paper describes a simple and effective sample size prediction algorithm that conducts weighted fitting of learning curves. The algorithm outperformed an un-weighted algorithm described in previous literature. It can help researchers determine annotation sample size for supervised machine learning.

  10. Finite size scaling and lattice gauge theory

    International Nuclear Information System (INIS)

    Berg, B.A.

    1986-01-01

    Finite size (Fisher) scaling is investigated for four dimensional SU(2) and SU(3) lattice gauge theories without quarks. It allows to disentangle violations of (asymptotic) scaling and finite volume corrections. Mass spectrum, string tension, deconfinement temperature and lattice β-function are considered. For appropriate volumes, Monte Carlo investigations seem to be able to control the finite volume continuum limit. Contact is made with Luescher's small volume expansion and possibly also with the asymptotic large volume behavior. 41 refs., 19 figs

  11. New size measurements in population ecology

    OpenAIRE

    Cano Rodríguez, Manuel; Núñez-Nickel, Manuel

    2002-01-01

    In organizational ecology, we find the analysis of the impact exerted by competition between populations on vital ratios to be relatively under-developed. This paper intends to address this issue by developing new competition measurements whose common denominator is to give importance to organizational size. The application of these measurements in the case of competition between organizational forms in a population and their impact on mortality rates, demonstrates the usefulness of modelling...

  12. Political Polarization and the Size of Government

    OpenAIRE

    Lindqvist, Erik; Östling, Robert

    2008-01-01

    We study the effect of political polarization on government spending and redistribution using the dispersion of self-reported political preferences as our measure of polarization. Politically polarized countries have lower levels of redistribution and government consumption. The relationship between political polarization and the size of government is stronger in democratic countries, indicating that the effect goes through the political system. The results are robust to a large set of contro...

  13. Genome size estimation: a new methodology

    Science.gov (United States)

    Álvarez-Borrego, Josué; Gallardo-Escárate, Crisitian; Kober, Vitaly; López-Bonilla, Oscar

    2007-03-01

    Recently, within the cytogenetic analysis, the evolutionary relations implied in the content of nuclear DNA in plants and animals have received a great attention. The first detailed measurements of the nuclear DNA content were made in the early 40's, several years before Watson and Crick proposed the molecular structure of the DNA. In the following years Hewson Swift developed the concept of "C-value" in reference to the haploid phase of DNA in plants. Later Mirsky and Ris carried out the first systematic study of genomic size in animals, including representatives of the five super classes of vertebrates as well as of some invertebrates. From these preliminary results it became evident that the DNA content varies enormously between the species and that this variation does not bear relation to the intuitive notion from the complexity of the organism. Later, this observation was reaffirmed in the following years as the studies increased on genomic size, thus denominating to this characteristic of the organisms like the "Paradox of the C-value". Few years later along with the no-codification discovery of DNA the paradox was solved, nevertheless, numerous questions remain until nowadays unfinished, taking to denominate this type of studies like the "C-value enigma". In this study, we reported a new method for genome size estimation by quantification of fluorescence fading. We measured the fluorescence intensity each 1600 milliseconds in DAPI-stained nuclei. The estimation of the area under the graph (integral fading) during fading period was related with the genome size.

  14. Size dependent optical characteristics of chemically deposited ...

    Indian Academy of Sciences (India)

    TECS

    source. The effect of film thickness on the optical and structural properties was studied. The optical absorption studies in the wavelength range 250–750 nm show that band gap energy of. ZnS increases from 3⋅68–4⋅10 eV as thickness varied from 332–76 nm. The structural estimation shows varia- tion in grain size from ...

  15. Los Alamos transuranic waste size reduction facility

    International Nuclear Information System (INIS)

    Briesmeister, A.; Harper, J.; Reich, B.; Warren, J.L.

    1982-01-01

    A transuranic (TRU) Waste Size Reduction Facility (SRF) was designed and constructed at the Los Alamos National Laboratory during the period of 1977 to 1981. This paper summarizes the engineering development, installation, and early test operations of the SRF. The facility incorporates a large stainless steel enclosure fitted with remote handling and cutting equipment to obtain an estimated 4:1 volume reduction of gloveboxes and other bulky metallic wastes

  16. Conception, definition, measuring procedure of grain size

    International Nuclear Information System (INIS)

    Yanagisawa, Kazuaki

    1976-12-01

    The conception, definition, measuring procedure of ''Grain Size'' were surveyed. A concept ''grain diameter'' was introduced after deriving a calculation formula for the grain diameter for using the Comparison (simple) and Intercept(detailed) procedure. As an example and putting into practice, the grain diameter determination was carried out by means of the Comparison procedure for a UO 2 pellet used in a densification experiment. (auth.)

  17. The Size Scale of Star Clusters

    Science.gov (United States)

    Madrid, Juan P.; Hurley, Jarrod R.; Sippel, Anna C.

    2012-09-01

    Direct N-body simulations of star clusters in a realistic Milky-Way-like potential are carried out using the code NBODY6. Based on these simulations, a new relationship between scale size and galactocentric distance is derived: the scale size of star clusters is proportional to the hyperbolic tangent of the galactocentric distance. The half-mass radius of star clusters increases systematically with galactocentric distance but levels off when star clusters orbit the galaxy beyond ~40 kpc. These simulations show that the half-mass radius of individual star clusters varies significantly as they evolve over a Hubble time, more so for clusters with shorter relaxation times, and remains constant through several relaxation times only in certain situations when expansion driven by the internal dynamics of the star cluster and the influence of the host galaxy tidal field balance each other. Indeed, the radius of a star cluster evolving within the inner 20 kpc of a realistic galactic gravitational potential is severely truncated by tidal interactions and does not remain constant over a Hubble time. Furthermore, the half-mass radius of star clusters measured with present-day observations bears no memory of the original cluster size. Stellar evolution and tidal stripping are the two competing physical mechanisms that determine the present-day size of globular clusters. These simulations also show that extended star clusters can form at large galactocentric distances while remaining fully bound to the host galaxy. There is thus no need to invoke accretion from an external galaxy to explain the presence of extended clusters at large galactocentric distances in a Milky-Way-type galaxy.

  18. Evaluation of the field size in dental diagnostic radiology system

    International Nuclear Information System (INIS)

    Andrade, P.S.; Potiens, M.P.A.

    2006-01-01

    In this work the field size of a dental X rays machine was evaluated considering the recommendation of the Brazilian Health Ministry Regulation 453 which established basic lines of radiological protection in medical and dental diagnostic radiology. The diameter of the field should not be superior to 6 cm in the localized end point, limiting the radiated area and protecting the head-neck region. The measurements were carried out in a dental X rays machine, Dabi Atlante, model Spectro 70X Seletronic. For the field size or useful beam determination, the intra-oral films were positioned on a plain surface to be exposed in four stages and two focus-film distances (FFD), 20 cm and 27.5 cm: 1) with spacer cone; 2) without spacer cone; 3) with spacer cone and film-holding device; 4) without spacer cone and film-holding device. The results show that the diameter of the field size is satisfactory only for FFD = 20 cm. When the film-holding device is used, which is recommended by the Regulation 453, item 5.8 d(ii), the diameter of the field size exceeds the maximum recommended value of 6 cm. (authors)

  19. Method for measuring the size distribution of airborne rhinovirus

    International Nuclear Information System (INIS)

    Russell, M.L.; Goth-Goldstein, R.; Apte, M.G.; Fisk, W.J.

    2002-01-01

    About 50% of viral-induced respiratory illnesses are caused by the human rhinovirus (HRV). Measurements of the concentrations and sizes of bioaerosols are critical for research on building characteristics, aerosol transport, and mitigation measures. We developed a quantitative reverse transcription-coupled polymerase chain reaction (RT-PCR) assay for HRV and verified that this assay detects HRV in nasal lavage samples. A quantitation standard was used to determine a detection limit of 5 fg of HRV RNA with a linear range over 1000-fold. To measure the size distribution of HRV aerosols, volunteers with a head cold spent two hours in a ventilated research chamber. Airborne particles from the chamber were collected using an Andersen Six-Stage Cascade Impactor. Each stage of the impactor was analyzed by quantitative RT-PCR for HRV. For the first two volunteers with confirmed HRV infection, but with mild symptoms, we were unable to detect HRV on any stage of the impactor

  20. Method for measuring the size distribution of airborne rhinovirus

    Energy Technology Data Exchange (ETDEWEB)

    Russell, M.L.; Goth-Goldstein, R.; Apte, M.G.; Fisk, W.J.

    2002-01-01

    About 50% of viral-induced respiratory illnesses are caused by the human rhinovirus (HRV). Measurements of the concentrations and sizes of bioaerosols are critical for research on building characteristics, aerosol transport, and mitigation measures. We developed a quantitative reverse transcription-coupled polymerase chain reaction (RT-PCR) assay for HRV and verified that this assay detects HRV in nasal lavage samples. A quantitation standard was used to determine a detection limit of 5 fg of HRV RNA with a linear range over 1000-fold. To measure the size distribution of HRV aerosols, volunteers with a head cold spent two hours in a ventilated research chamber. Airborne particles from the chamber were collected using an Andersen Six-Stage Cascade Impactor. Each stage of the impactor was analyzed by quantitative RT-PCR for HRV. For the first two volunteers with confirmed HRV infection, but with mild symptoms, we were unable to detect HRV on any stage of the impactor.

  1. Specialization and group size: brain and behavioural correlates of colony size in ants lacking morphological castes.

    Science.gov (United States)

    Amador-Vargas, Sabrina; Gronenberg, Wulfila; Wcislo, William T; Mueller, Ulrich

    2015-02-22

    Group size in both multicellular organisms and animal societies can correlate with the degree of division of labour. For ants, the task specialization hypothesis (TSH) proposes that increased behavioural specialization enabled by larger group size corresponds to anatomical specialization of worker brains. Alternatively, the social brain hypothesis proposes that increased levels of social stimuli in larger colonies lead to enlarged brain regions in all workers, regardless of their task specialization. We tested these hypotheses in acacia ants (Pseudomyrmex spinicola), which exhibit behavioural but not morphological task specialization. In wild colonies, we marked, followed and tested ant workers involved in foraging tasks on the leaves (leaf-ants) and in defensive tasks on the host tree trunk (trunk-ants). Task specialization increased with colony size, especially in defensive tasks. The relationship between colony size and brain region volume was task-dependent, supporting the TSH. Specifically, as colony size increased, the relative size of regions within the mushroom bodies of the brain decreased in trunk-ants but increased in leaf-ants; those regions play important roles in learning and memory. Our findings suggest that workers specialized in defence may have reduced learning abilities relative to leaf-ants; these inferences remain to be tested. In societies with monomorphic workers, brain polymorphism enhanced by group size could be a mechanism by which division of labour is achieved. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  2. Relation between the ion size and pore size for an electric double-layer capacitor.

    Science.gov (United States)

    Largeot, Celine; Portet, Cristelle; Chmiola, John; Taberna, Pierre-Louis; Gogotsi, Yury; Simon, Patrice

    2008-03-05

    The research on electrochemical double layer capacitors (EDLC), also known as supercapacitors or ultracapacitors, is quickly expanding because their power delivery performance fills the gap between dielectric capacitors and traditional batteries. However, many fundamental questions, such as the relations between the pore size of carbon electrodes, ion size of the electrolyte, and the capacitance have not yet been fully answered. We show that the pore size leading to the maximum double-layer capacitance of a TiC-derived carbon electrode in a solvent-free ethyl-methylimmidazolium-bis(trifluoro-methane-sulfonyl)imide (EMI-TFSI) ionic liquid is roughly equal to the ion size (approximately 0.7 nm). The capacitance values of TiC-CDC produced at 500 degrees C are more than 160 F/g and 85 F/cm(3) at 60 degrees C, while standard activated carbons with larger pores and a broader pore size distribution present capacitance values lower than 100 F/g and 50 F/cm(3) in ionic liquids. A significant drop in capacitance has been observed in pores that were larger or smaller than the ion size by just an angstrom, suggesting that the pore size must be tuned with sub-angstrom accuracy when selecting a carbon/ion couple. This work suggests a general approach to EDLC design leading to the maximum energy density, which has been now proved for both solvated organic salts and solvent-free liquid electrolytes.

  3. Size-dependent collection of micrometer-sized particles using nylon mesh

    Science.gov (United States)

    Yamamoto, Naomichi; Kumagai, Kazukiyo; Fujii, Minoru; Shendell, Derek G.; Endo, Osamu; Yanagisawa, Yukio

    Our study explored the size-dependent collection characteristics for micron-sized particles using several kinds of commercially available woven nylon net filters. The particle concentrations with and without the filter were compared to determine the filtration characteristics. The theoretical efficiencies based on a single-fiber theory and a hole model were also computed. Although the theoretical efficiencies were generally consistent with the experimental results, the non-uniformity of air velocity profile within a mesh hole, and a particle's detachment from or bounce off the filters, should be further investigated in future research. Overall, the present study revealed the size-fractionation capability of the nylon wire mesh filters for micron-sized particles from experimental and theoretical points of view. Unlike impactors, the size-fractionation characteristics of the nylon wire mesh filter were determined by particle size, mesh fiber diameter, and a combination of different particle collection mechanisms including impaction, interception, and gravitational settling. Each mechanical process appears interdependently governed in part by the filter dimensions such as filter mesh size (diameter of opening) as well as related variables such as packing density and fiber diameter.

  4. Molecular theory of size exclusion chromatography for wide pore size distributions.

    Science.gov (United States)

    Sepsey, Annamária; Bacskay, Ivett; Felinger, Attila

    2014-02-28

    Chromatographic processes can conveniently be modeled at a microscopic level using the molecular theory of chromatography. This molecular or microscopic theory is completely general; therefore it can be used for any chromatographic process such as adsorption, partition, ion-exchange or size exclusion chromatography. The molecular theory of chromatography allows taking into account the kinetics of the pore ingress and egress processes, the heterogeneity of the pore sizes and polymer polydispersion. In this work, we assume that the pore size in the stationary phase of chromatographic columns is governed by a wide lognormal distribution. This property is integrated into the molecular model of size exclusion chromatography and the moments of the elution profiles were calculated for several kinds of pore structure. Our results demonstrate that wide pore size distributions have strong influence on the retention properties (retention time, peak width, and peak shape) of macromolecules. The novel model allows us to estimate the real pore size distribution of commonly used HPLC stationary phases, and the effect of this distribution on the size exclusion process. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Size matters for lice on birds: Coevolutionary allometry of host and parasite body size.

    Science.gov (United States)

    Harnos, Andrea; Lang, Zsolt; Petrás, Dóra; Bush, Sarah E; Szabó, Krisztián; Rózsa, Lajos

    2017-02-01

    Body size is one of the most fundamental characteristics of all organisms. It influences physiology, morphology, behavior, and even interspecific interactions such as those between parasites and their hosts. Host body size influences the magnitude and variability of parasite size according to Harrison's rule (HR: positive relationship between host and parasite body sizes) and Poulin's Increasing Variance Hypothesis (PIVH: positive relationship between host body size and the variability of parasite body size). We analyzed parasite-host body size allometry for 581 species of avian lice (∼15% of known diversity) and their hosts. We applied phylogenetic generalized least squares (PGLS) methods to account for phylogenetic nonindependence controlling for host and parasite phylogenies separately and variance heterogeneity. We tested HR and PIVH for the major families of avian lice (Ricinidae, Menoponidae, Philopteridae), and for distinct ecological guilds within Philopteridae. Our data indicate that most families and guilds of avian lice follow both HR and PIVH; however, ricinids did not follow PIVH and the "body lice" guild of philopterid lice did not follow HR or PIVH. We discuss mathematical and ecological factors that may be responsible for these patterns, and we discuss the potential pervasiveness of these relationships among all parasites on Earth. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  6. Blocked Randomization with Randomly Selected Block Sizes

    Directory of Open Access Journals (Sweden)

    Jimmy Efird

    2010-12-01

    Full Text Available When planning a randomized clinical trial, careful consideration must be given to how participants are selected for various arms of a study. Selection and accidental bias may occur when participants are not assigned to study groups with equal probability. A simple random allocation scheme is a process by which each participant has equal likelihood of being assigned to treatment versus referent groups. However, by chance an unequal number of individuals may be assigned to each arm of the study and thus decrease the power to detect statistically significant differences between groups. Block randomization is a commonly used technique in clinical trial design to reduce bias and achieve balance in the allocation of participants to treatment arms, especially when the sample size is small. This method increases the probability that each arm will contain an equal number of individuals by sequencing participant assignments by block. Yet still, the allocation process may be predictable, for example, when the investigator is not blind and the block size is fixed. This paper provides an overview of blocked randomization and illustrates how to avoid selection bias by using random block sizes.

  7. Minimal size of a barchan dune

    Science.gov (United States)

    Parteli, E. J. R.; Durán, O.; Herrmann, H. J.

    2007-01-01

    Barchans are dunes of high mobility which have a crescent shape and propagate under conditions of unidirectional wind. However, sand dunes only appear above a critical size, which scales with the saturation distance of the sand flux [P. Hersen, S. Douady, and B. Andreotti, Phys. Rev. Lett. 89, 264301 (2002); B. Andreotti, P. Claudin, and S. Douady, Eur. Phys. J. B 28, 321 (2002); G. Sauermann, K. Kroy, and H. J. Herrmann, Phys. Rev. E 64, 31305 (2001)]. It has been suggested by P. Hersen, S. Douady, and B. Andreotti, Phys. Rev. Lett. 89, 264301 (2002)] that this flux fetch distance is itself constant. Indeed, this could not explain the protosize of barchan dunes, which often occur in coastal areas of high litoral drift, and the scale of dunes on Mars. In the present work, we show from three-dimensional calculations of sand transport that the size and the shape of the minimal barchan dune depend on the wind friction speed and the sand flux on the area between dunes in a field. Our results explain the common appearance of barchans a few tens of centimeter high which are observed along coasts. Furthermore, we find that the rate at which grains enter saltation on Mars is one order of magnitude higher than on Earth, and is relevant to correctly obtain the minimal dune size on Mars.

  8. Aerosol size characteristics in selected working areas

    International Nuclear Information System (INIS)

    Ahmed, K.

    1984-05-01

    This report presents the work done to study the aerosol activity size distributions and their respirable fractions in some selected areas of the Juelich Nuclear Research Center. Anderson cascade impactors were used to find the aerodynamic size ranges of the airborne particles for subsequent analysis of activity associated with each size group. The aerosols were found to follow in general log-normal distributions in the hot cells with values of AMAD between 5 and 10 μm. Measurements in the AVR containment and decontamination laboratory in Uranit GmbH showed deviations from log-normal distribution. In the waste press area the distribution is sometimes log-normal and sometimes not, depending upon the origin of waste. The values of AMAD are in the range of 2 to 4 μm in these areas. The respirable fractions were calculated using ACGIH definition for respirable dust to be < 25% in hot cells and < 60% in other areas. Pulmonary depositions according to ICRP model were < 10% and < 15% respectively. (orig./HP)

  9. Green synthesis of size controllable gold nanoparticles.

    Science.gov (United States)

    Mohan Kumar, Kesarla; Mandal, Badal Kumar; Kiran Kumar, Hoskote A; Maddinedi, Sireesh Babu

    2013-12-01

    A facile rapid green eco-friendly method to synthesize gold nanoparticles (Au NPs) of tunable size using aqueous Terminalia arjuna fruit extracts has been demonstrated herein. Formation of Au NPs was confirmed by Surface Plasmon Resonance (SPR) study at 528 nm using UV-visible spectrophotometer. The time of reduction, size and morphological variations of Au NPs were studied with varying quantities of T. arjuna fruit aqueous extracts. Synthesized Au NPs were characterized using UV-visible spectroscopy, Fourier transformed infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and Energy dispersive X-ray spectroscopy (EDAX). Polyphenols responsible for reduction of Au(3+) to Au(0) were identified using High Performance Liquid Chromatography (HPLC) as ascorbic acid, gallic acid and pyrogallol. The oxidized forms of polyphenols formed coordination with surface of Au NPs which protected their further growth and aggregation. We also propose a plausible mechanism how to tune size and shape of Au NPs by varying the quantity of extracts. Thus obtained Au NPs were stable for more than four months. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Determining sample size when assessing mean equivalence.

    Science.gov (United States)

    Asberg, Arne; Solem, Kristine B; Mikkelsen, Gustav

    2014-11-01

    When we want to assess whether two analytical methods are equivalent, we could test if the difference between the mean results is within the specification limits of 0 ± an acceptance criterion. Testing the null hypothesis of zero difference is less interesting, and so is the sample size estimation based on testing that hypothesis. Power function curves for equivalence testing experiments are not widely available. In this paper we present power function curves to help decide on the number of measurements when testing equivalence between the means of two analytical methods. Computer simulation was used to calculate the probability that the 90% confidence interval for the difference between the means of two analytical methods would exceed the specification limits of 0 ± 1, 0 ± 2 or 0 ± 3 analytical standard deviations (SDa), respectively. The probability of getting a nonequivalence alarm increases with increasing difference between the means when the difference is well within the specification limits. The probability increases with decreasing sample size and with smaller acceptance criteria. We may need at least 40-50 measurements with each analytical method when the specification limits are 0 ± 1 SDa, and 10-15 and 5-10 when the specification limits are 0 ± 2 and 0 ± 3 SDa, respectively. The power function curves provide information of the probability of false alarm, so that we can decide on the sample size under less uncertainty.

  11. Finding Resources to Reduce Class-size

    Directory of Open Access Journals (Sweden)

    Allan Odden

    2001-08-01

    Full Text Available This article discusses how a medium-sized school district in Wisconsin was able to reallocate resources to reduce class sizes in grades K-5 without spending more money or increasing its tax rate. Previous research on resource reallocation found that the bulk of reallocated resources were those supporting categorical program services. This district was able to use a different strategy. As a growing district, its marginal costs of adding an extra class of students were much less than its average expenditures per pupil, which were reimbursed by the state school finance formula. As the district grew, therefore, it acquired excess revenues. Also, by implementing full-day kindergarten, the district acquired more excess revenues because this added (0.5 pupil X (Number of kindergartners to its current enrollment, and the cost of educating these students was less than the amount they received from the state funding formula. It then used these revenues to reduce class sizes to between 15 and 20 in all Kindergarten through grade 3 classrooms and to between 15 and 22 for grades 4-5.

  12. Green synthesis of size controllable gold nanoparticles

    Science.gov (United States)

    Mohan Kumar, Kesarla; Mandal, Badal Kumar; Kiran Kumar, Hoskote A.; Maddinedi, Sireesh Babu

    2013-12-01

    A facile rapid green eco-friendly method to synthesize gold nanoparticles (Au NPs) of tunable size using aqueous Terminalia arjuna fruit extracts has been demonstrated herein. Formation of Au NPs was confirmed by Surface Plasmon Resonance (SPR) study at 528 nm using UV-visible spectrophotometer. The time of reduction, size and morphological variations of Au NPs were studied with varying quantities of T. arjuna fruit aqueous extracts. Synthesized Au NPs were characterized using UV-visible spectroscopy, Fourier transformed infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and Energy dispersive X-ray spectroscopy (EDAX). Polyphenols responsible for reduction of Au3+ to Au0 were identified using High Performance Liquid Chromatography (HPLC) as ascorbic acid, gallic acid and pyrogallol. The oxidized forms of polyphenols formed coordination with surface of Au NPs which protected their further growth and aggregation. We also propose a plausible mechanism how to tune size and shape of Au NPs by varying the quantity of extracts. Thus obtained Au NPs were stable for more than four months.

  13. Investigating the optimal size of anticancer nanomedicine.

    Science.gov (United States)

    Tang, Li; Yang, Xujuan; Yin, Qian; Cai, Kaimin; Wang, Hua; Chaudhury, Isthier; Yao, Catherine; Zhou, Qin; Kwon, Mincheol; Hartman, James A; Dobrucki, Iwona T; Dobrucki, Lawrence W; Borst, Luke B; Lezmi, Stéphane; Helferich, William G; Ferguson, Andrew L; Fan, Timothy M; Cheng, Jianjun

    2014-10-28

    Nanomedicines (NMs) offer new solutions for cancer diagnosis and therapy. However, extension of progression-free interval and overall survival time achieved by Food and Drug Administration-approved NMs remain modest. To develop next generation NMs to achieve superior anticancer activities, it is crucial to investigate and understand the correlation between the physicochemical properties of NMs (particle size in particular) and their interactions with biological systems to establish criteria for NM optimization. Here, we systematically evaluated the size-dependent biological profiles of three monodisperse drug-silica nanoconjugates (NCs; 20, 50, and 200 nm) through both experiments and mathematical modeling and aimed to identify the optimal size for the most effective anticancer drug delivery. Among the three NCs investigated, the 50-nm NC shows the highest tumor tissue retention integrated over time, which is the collective outcome of deep tumor tissue penetration and efficient cancer cell internalization as well as slow tumor clearance, and thus, the highest efficacy against both primary and metastatic tumors in vivo.

  14. Window Size Impact in Human Activity Recognition

    Directory of Open Access Journals (Sweden)

    Oresti Banos

    2014-04-01

    Full Text Available Signal segmentation is a crucial stage in the activity recognition process; however, this has been rarely and vaguely characterized so far. Windowing approaches are normally used for segmentation, but no clear consensus exists on which window size should be preferably employed. In fact, most designs normally rely on figures used in previous works, but with no strict studies that support them. Intuitively, decreasing the window size allows for a faster activity detection, as well as reduced resources and energy needs. On the contrary, large data windows are normally considered for the recognition of complex activities. In this work, we present an extensive study to fairly characterize the windowing procedure, to determine its impact within the activity recognition process and to help clarify some of the habitual assumptions made during the recognition system design. To that end, some of the most widely used activity recognition procedures are evaluated for a wide range of window sizes and activities. From the evaluation, the interval 1–2 s proves to provide the best trade-off between recognition speed and accuracy. The study, specifically intended for on-body activity recognition systems, further provides designers with a set of guidelines devised to facilitate the system definition and configuration according to the particular application requirements and target activities.

  15. Safeguarding large size reprocessing facilities, a challenge?

    International Nuclear Information System (INIS)

    Regnier, J.; Saverot, P.

    1994-01-01

    Safeguard implementation has evolved over years for relatively simple beginning in first reprocessing plants such as UP-2 in France and Tokai-mura in Japan to the high level technical sophistication in the large size COGEMA reprocessing plant which is fully automated for safety, security and efficiency. The increase of size, complexity and automation has resulted in the legitimate feeling of frustration from inspectorate, national authority and operators. In 1980s, increased emphasis was placed on the formalization of safeguard techniques, methods and equipment to face the challenge of safeguarding effectively and efficiently new large size reprocessing plants. Safeguard approaches, technical capability, facility practices, safeguard measures, inspection procedures, and effectiveness evaluation were developed, reviewed and implemented. The general solutions for facing the challenge, the La Hague reprocessing complex, the research and development for safeguard equipment and so on are described. The safeguard scheme designed by EURATOM in agreement with COGEMA for the La Hague reprocessing complex, based on a modern, complete and extensive C/S and nuclear material accountancy system, has proved to be efficient and effective. Large commercial reprocessing plants can be effectively safeguarded despita their high degree of automation. (K.I.)

  16. Blocked randomization with randomly selected block sizes.

    Science.gov (United States)

    Efird, Jimmy

    2011-01-01

    When planning a randomized clinical trial, careful consideration must be given to how participants are selected for various arms of a study. Selection and accidental bias may occur when participants are not assigned to study groups with equal probability. A simple random allocation scheme is a process by which each participant has equal likelihood of being assigned to treatment versus referent groups. However, by chance an unequal number of individuals may be assigned to each arm of the study and thus decrease the power to detect statistically significant differences between groups. Block randomization is a commonly used technique in clinical trial design to reduce bias and achieve balance in the allocation of participants to treatment arms, especially when the sample size is small. This method increases the probability that each arm will contain an equal number of individuals by sequencing participant assignments by block. Yet still, the allocation process may be predictable, for example, when the investigator is not blind and the block size is fixed. This paper provides an overview of blocked randomization and illustrates how to avoid selection bias by using random block sizes.

  17. Economics of forest tract size: Theory and literature

    Science.gov (United States)

    Fred Cubbage

    1983-01-01

    This report reviews worldwide literature and theoretical bases on economics of forest tract size and examines means of reducing the diseconomies of small size. Economics of size will become more important as forestry becomes more mechanized.

  18. 77 FR 58739 - Small Business Size Standards: Educational Services

    Science.gov (United States)

    2012-09-24

    ... and net income size based standards. At the start of the current comprehensive small business size... standards in this rule more appropriately reflect the size of businesses in those industries that need... 58739

  19. Power laws, discontinuities and regional city size distributions

    Science.gov (United States)

    Garmestani, A.S.; Allen, Craig R.; Gallagher, C.M.

    2008-01-01

    Urban systems are manifestations of human adaptation to the natural environment. City size distributions are the expression of hierarchical processes acting upon urban systems. In this paper, we test the entire city size distributions for the southeastern and southwestern United States (1990), as well as the size classes in these regions for power law behavior. We interpret the differences in the size of the regional city size distributions as the manifestation of variable growth dynamics dependent upon city size. Size classes in the city size distributions are snapshots of stable states within urban systems in flux.

  20. Size Matters!. Birth Size and a Size-Independent Stochastic Term Determine Asexual Reproduction Dynamics in Freshwater Planarians

    Science.gov (United States)

    Thomas, Michael A.; Quinodoz, Sofia; Schötz, Eva-Maria

    2012-09-01

    Asexual reproduction by division in higher organisms is rare, because a prerequisite is the ability to regenerate an entire organism from a piece of the original body. Freshwater planarians are one of the few animals that can reproduce this way, but little is known about the regulation of their reproduction cycles or strategies. We have previously shown that a planarian's reproduction strategy is randomized to include fragmentations, producing multiple offspring, as well as binary fissions, and can be partially explained by a maximum relative entropy principle. In this study we attempt to decompose the factors controlling their reproduction cycle. Based on recent studies on the cell cycle of budding yeast, which suggest that molecular noise in gene expression and cell size at birth together control cell cycle variability, we investigated whether the variability in planarian reproduction waiting times could be similarly regulated. We find that such a model can indeed explain the observed distribution of waiting times between birth and next reproductive event, suggesting that birth size and a stochastic noise term govern the reproduction dynamics of asexual planarians.

  1. Song repertoire size correlates with measures of body size in Eurasian blackbirds

    DEFF Research Database (Denmark)

    Hesler, Nana; Mundry, Roger; Sacher, Thomas

    2012-01-01

    In most oscine bird species males possess a repertoire of different song patterns. The size of these repertoires is assumed to serve as an honest signal of male quality. The Eurasian blackbird’s (Turdus merula) song contains a large repertoire of different element types with a flexible song organ...... is linked to overall male quality, our results are in accordance with the hypothesis that repertoire size represents an honest signal in Eurasian blackbirds that has evolved in response to sexual selection....

  2. Size matters: how accurate is clinical estimation of traumatic wound size?

    Science.gov (United States)

    Peterson, N; Stevenson, H; Sahni, V

    2014-01-01

    The presentation of traumatic wounds is commonplace in the accident & emergency department. Often, these wounds need referral to specialist care, e.g. trauma & orthopaedic, plastic or maxillofacial surgeons. Documentation and communication of the size of the wound can influence management, e.g. Gustilo & Anderson classification of open fractures. Several papers acknowledge the variability in measurement of chronic wounds, but there is no data regarding accuracy of traumatic wound assessment. The authors hypothesised that the estimation of wound size and subsequent communication or documentation was often inaccurate, with high inter-observer variability. A study was designed to assess this hypothesis. A total of 7 scaled images of wounds related to trauma were obtained from an Internet search engine. The questionnaire asked 3 questions regarding mechanism of injury, relevant anatomy and proposed treatment, to simulate real patient assessment. One further question addressed the estimation of wound size. 50 doctors of varying experience across several specialities were surveyed. The images were analysed after data collection had finished to provide appropriate measurements, and compared to the questionnaire results by a researcher blinded to the demographics of the individual. Our results show that there is a high inter-observer variability and inaccuracy in the estimation of wound size. This inaccuracy was directional and affected by gender. Male doctors were more likely to overestimate the size of wounds, whilst their female colleagues were more likely to underestimate size. The estimation of wound size is a common requirement of clinical practice, and inaccurate interpretation of size may influence surgical management. Assessment using estimation was inaccurate, with high inter-observer variability. Assessment of traumatic wounds that require surgical management should be accurately measured, possibly using photography and ruler measurement. Copyright © 2012

  3. Portion size and intended consumption. Evidence for a pre-consumption portion size effect in males?

    Science.gov (United States)

    Robinson, Eric; te Raa, Wesselien; Hardman, Charlotte A

    2015-08-01

    Larger portions increase energy intake (the 'portion size effect'); however, the mechanisms behind this effect are unclear. Although pre-meal intentions are thought to be an important determinant of energy intake, little research has examined how much of a meal individuals intend to eat when served standard versus larger portion sizes. Three studies examined the effect of manipulating portion size on intended food consumption. In Studies 1 (spaghetti bolognese) and 2 (curry and rice) male participants were shown an image of either a standard or a larger meal and indicated how much of the meal they intended to consume. In Study 3 male and female participants were served either a standard or a larger portion of ice cream for dessert, they indicated how much they intended to consume and then ate as much of the ice cream as they desired. Regardless of being shown standard or large portion sizes, in Studies 1 and 2 participants reported that they intended to eat the majority of the meal, equating to a large difference in intended energy consumption between portion size conditions (a 'pre-consumption portion size effect'). This finding was replicated in male participants in Study 3, although females intended to eat a smaller proportion of the larger portion of ice cream, compared to the standard portion. Both male and female participants tended to eat in accordance with their pre-meal intentions and a portion size effect on actual consumption was subsequently observed in males, but not in females. The portion size effect may be observed when measuring pre-meal intended consumption in males. Copyright © 2015. Published by Elsevier Ltd.

  4. Being Barbie: the size of one's own body determines the perceived size of the world.

    Science.gov (United States)

    van der Hoort, Björn; Guterstam, Arvid; Ehrsson, H Henrik

    2011-01-01

    A classical question in philosophy and psychology is if the sense of one's body influences how one visually perceives the world. Several theoreticians have suggested that our own body serves as a fundamental reference in visual perception of sizes and distances, although compelling experimental evidence for this hypothesis is lacking. In contrast, modern textbooks typically explain the perception of object size and distance by the combination of information from different visual cues. Here, we describe full body illusions in which subjects experience the ownership of a doll's body (80 cm or 30 cm) and a giant's body (400 cm) and use these as tools to demonstrate that the size of one's sensed own body directly influences the perception of object size and distance. These effects were quantified in ten separate experiments with complementary verbal, questionnaire, manual, walking, and physiological measures. When participants experienced the tiny body as their own, they perceived objects to be larger and farther away, and when they experienced the large-body illusion, they perceived objects to be smaller and nearer. Importantly, despite identical retinal input, this "body size effect" was greater when the participants experienced a sense of ownership of the artificial bodies compared to a control condition in which ownership was disrupted. These findings are fundamentally important as they suggest a causal relationship between the representations of body space and external space. Thus, our own body size affects how we perceive the world.

  5. Being Barbie: the size of one's own body determines the perceived size of the world.

    Directory of Open Access Journals (Sweden)

    Björn van der Hoort

    Full Text Available A classical question in philosophy and psychology is if the sense of one's body influences how one visually perceives the world. Several theoreticians have suggested that our own body serves as a fundamental reference in visual perception of sizes and distances, although compelling experimental evidence for this hypothesis is lacking. In contrast, modern textbooks typically explain the perception of object size and distance by the combination of information from different visual cues. Here, we describe full body illusions in which subjects experience the ownership of a doll's body (80 cm or 30 cm and a giant's body (400 cm and use these as tools to demonstrate that the size of one's sensed own body directly influences the perception of object size and distance. These effects were quantified in ten separate experiments with complementary verbal, questionnaire, manual, walking, and physiological measures. When participants experienced the tiny body as their own, they perceived objects to be larger and farther away, and when they experienced the large-body illusion, they perceived objects to be smaller and nearer. Importantly, despite identical retinal input, this "body size effect" was greater when the participants experienced a sense of ownership of the artificial bodies compared to a control condition in which ownership was disrupted. These findings are fundamentally important as they suggest a causal relationship between the representations of body space and external space. Thus, our own body size affects how we perceive the world.

  6. Multimodal Dispersion of Nanoparticles: A Comprehensive Evaluation of Size Distribution with 9 Size Measurement Methods.

    Science.gov (United States)

    Varenne, Fanny; Makky, Ali; Gaucher-Delmas, Mireille; Violleau, Frédéric; Vauthier, Christine

    2016-05-01

    Evaluation of particle size distribution (PSD) of multimodal dispersion of nanoparticles is a difficult task due to inherent limitations of size measurement methods. The present work reports the evaluation of PSD of a dispersion of poly(isobutylcyanoacrylate) nanoparticles decorated with dextran known as multimodal and developed as nanomedecine. The nine methods used were classified as batch particle i.e. Static Light Scattering (SLS) and Dynamic Light Scattering (DLS), single particle i.e. Electron Microscopy (EM), Atomic Force Microscopy (AFM), Tunable Resistive Pulse Sensing (TRPS) and Nanoparticle Tracking Analysis (NTA) and separative particle i.e. Asymmetrical Flow Field-Flow Fractionation coupled with DLS (AsFlFFF) size measurement methods. The multimodal dispersion was identified using AFM, TRPS and NTA and results were consistent with those provided with the method based on a separation step prior to on-line size measurements. None of the light scattering batch methods could reveal the complexity of the PSD of the dispersion. Difference between PSD obtained from all size measurement methods tested suggested that study of the PSD of multimodal dispersion required to analyze samples by at least one of the single size particle measurement method or a method that uses a separation step prior PSD measurement.

  7. Uniformity trial size in estimates of plot size in restrict areas

    Directory of Open Access Journals (Sweden)

    Diogo Vanderlei Schwertner

    Full Text Available ABSTRACTThe aim of this study was to determine the uniformity trial size when estimating optimum plot size in order to evaluate fresh phytomass in lettuce plants and fruit weight in sweet peppers. Production data, collected in uniformity trial on lettuce in a plastic greenhouse in both summer and winter, lettuce in plastic tunnels in autumn and winter, and sweet pepper in a plastic greenhouse in the summer-autumn and spring-summer seasons, were used to plan different uniformity trial sizes in crop rows. In all the experiments, each plant was evaluated individually and considered as a basic experimental unit. For each size in a uniformity trial, 3,000 resamples, randomly taken with replacement, were used to estimate optimum plot size. Uniformity trial using 27 basic experimental units to evaluate the fresh phytomass of lettuce plants, and with 29 basic experimental units to assess fruit weight in sweet pepper, are sufficient to estimate optimum plot size, with an amplitude of the 95% confidence interval of less than or equal to two basic experimental units.

  8. Efficient and Unbiased Estimation of Population Size.

    Science.gov (United States)

    Cruz, Marcos; Gómez, Domingo; Cruz-Orive, Luis M

    2015-01-01

    Population sizing from still aerial pictures is of wide applicability in ecological and social sciences. The problem is long standing because current automatic detection and counting algorithms are known to fail in most cases, and exhaustive manual counting is tedious, slow, difficult to verify and unfeasible for large populations. An alternative is to multiply population density with some reference area but, unfortunately, sampling details, handling of edge effects, etc., are seldom described. For the first time we address the problem using principles of geometric sampling. These principles are old and solid, but largely unknown outside the areas of three dimensional microscopy and stereology. Here we adapt them to estimate the size of any population of individuals lying on an essentially planar area, e.g. people, animals, trees on a savanna, etc. The proposed design is unbiased irrespective of population size, pattern, perspective artifacts, etc. The implementation is very simple-it is based on the random superimposition of coarse quadrat grids. Also, an objective error assessment is often lacking. For the latter purpose the quadrat counts are often assumed to be independent. We demonstrate that this approach can perform very poorly, and we propose (and check via Monte Carlo resampling) a new theoretical error prediction formula. As far as efficiency, counting about 50 (100) individuals in 20 quadrats, can yield relative standard errors of about 8% (5%) in typical cases. This fact effectively breaks the barrier hitherto imposed by the current lack of automatic face detection algorithms, because semiautomatic sampling and manual counting becomes an attractive option.

  9. Methods for size classification of wood chips

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, Hans; Boehm, Thorsten [Technologie- und Foerderzentrum im Kompetenzzentrum fuer Nachwachsende Rohstoffe (TFZ), Schulgasse 18, D-94315 Straubing (Germany); Daugbjerg Jensen, Peter [Forest and Landscape FLD, The Royal Veterinary and Agricultural University, Rolighedsvej 23, DK-1958 Frederiksberg C (Denmark); Temmerman, Michaeel; Rabier, Fabienne [Centre wallon de Recherches agronomiques CRA-W Departement Genie rural, 146, Chaussee de Namur, B-5030 Gembloux (Belgium); Golser, Michael [Holzforschung Austria HFA Franz Grill-Stra beta e 7, A-1031 Wien (Austria)

    2006-11-15

    Methods for size classification of wood chips were analysed in an international round robin using 13 conventional wood chip samples and two specially prepared standard samples, one from wood chips and one from hog fuel. The true size distribution of these two samples (according to length, width and height) had been determined stereometrically (reference method) using a digital calliper gauge and by weighing each of the about 7000 wood particles per sample. Five different horizontal and three rotary screening devices were tested using five different screen hole diameters (3.15, 8, 16, 45, 63mm, round holes). These systems are compared to a commercially available continuously measuring image analysis equipment. The results show that among the devices of a measuring principle-horizontal and rotary screening-the results are quite comparable, while there is a severe incompatibility when distributions are determined by different measuring principles. Highest conformity with the reference values is given for measurements with an image analysis system, whereas for all machines with horizontal screens the median value of the size distribution only reached between one-third to half of the reference median value for the particle length distribution. These deviations can be attributed to a higher particle misplacement, which is particularly found in the larger fractions. Such differences decrease when the particle's shape is more roundish (i.e. sphericity closer to one). The median values of length distributions from screenings with a rotary classifier are between the measurements from an image analysis and horizontal screening devices. (author)

  10. The Sea-Ice Floe Size Distribution

    Science.gov (United States)

    Stern, H. L., III; Schweiger, A. J. B.; Zhang, J.; Steele, M.

    2017-12-01

    The size distribution of ice floes in the polar seas affects the dynamics and thermodynamics of the ice cover and its interaction with the ocean and atmosphere. Ice-ocean models are now beginning to include the floe size distribution (FSD) in their simulations. In order to characterize seasonal changes of the FSD and provide validation data for our ice-ocean model, we calculated the FSD in the Beaufort and Chukchi seas over two spring-summer-fall seasons (2013 and 2014) using more than 250 cloud-free visible-band scenes from the MODIS sensors on NASA's Terra and Aqua satellites, identifying nearly 250,000 ice floes between 2 and 30 km in diameter. We found that the FSD follows a power-law distribution at all locations, with a seasonally varying exponent that reflects floe break-up in spring, loss of smaller floes in summer, and the return of larger floes after fall freeze-up. We extended the results to floe sizes from 10 m to 2 km at selected time/space locations using more than 50 high-resolution radar and visible-band satellite images. Our analysis used more data and applied greater statistical rigor than any previous study of the FSD. The incorporation of the FSD into our ice-ocean model resulted in reduced sea-ice thickness, mainly in the marginal ice zone, which improved the simulation of sea-ice extent and yielded an earlier ice retreat. We also examined results from 17 previous studies of the FSD, most of which report power-law FSDs but with widely varying exponents. It is difficult to reconcile the range of results due to different study areas, seasons, and methods of analysis. We review the power-law representation of the FSD in these studies and discuss some mathematical details that are important to consider in any future analysis.

  11. Efficient and Unbiased Estimation of Population Size.

    Directory of Open Access Journals (Sweden)

    Marcos Cruz

    Full Text Available Population sizing from still aerial pictures is of wide applicability in ecological and social sciences. The problem is long standing because current automatic detection and counting algorithms are known to fail in most cases, and exhaustive manual counting is tedious, slow, difficult to verify and unfeasible for large populations. An alternative is to multiply population density with some reference area but, unfortunately, sampling details, handling of edge effects, etc., are seldom described. For the first time we address the problem using principles of geometric sampling. These principles are old and solid, but largely unknown outside the areas of three dimensional microscopy and stereology. Here we adapt them to estimate the size of any population of individuals lying on an essentially planar area, e.g. people, animals, trees on a savanna, etc. The proposed design is unbiased irrespective of population size, pattern, perspective artifacts, etc. The implementation is very simple-it is based on the random superimposition of coarse quadrat grids. Also, an objective error assessment is often lacking. For the latter purpose the quadrat counts are often assumed to be independent. We demonstrate that this approach can perform very poorly, and we propose (and check via Monte Carlo resampling a new theoretical error prediction formula. As far as efficiency, counting about 50 (100 individuals in 20 quadrats, can yield relative standard errors of about 8% (5% in typical cases. This fact effectively breaks the barrier hitherto imposed by the current lack of automatic face detection algorithms, because semiautomatic sampling and manual counting becomes an attractive option.

  12. A Descriptive Evaluation of Software Sizing Models

    Science.gov (United States)

    1987-09-01

    compensate for a lack of understanding of a software job to be done. 1.3 REPORT OUTLINE The guiding principle for model selection for this paper was...MODEL SIZE ESTIMATES FOR THE CAiSS SENSITIVITY MODEL MODEL SLOC ESD 37,600+ SPQR 35,910 BYL 22,402 PRICE SZ 21,410 ASSET-R 11,943 SSM 11,700 ASSET-R...disk. ?. Date LS, De fault current date, Re quire ] - ,, ... perffr: an,- 1 ,’ e e st i ma t e. Quantitative inputs Note- Each of the nine quantitative

  13. Irradiation of full size UMo plates

    International Nuclear Information System (INIS)

    Vacelet, H.; Lavastre, Y.; Grasse, M.; Sacristan, P.; Languille, A.

    1999-01-01

    An important development program for a UMo MTR fuel has been launched in France. The goal of the French working group is to develop a high performing and reprocessable fuel before the end of the US return policy. This paper is focussed on the fabrication of full-sized UMo plates with LEU (Low Enriched Enrichment) and their irradiation in OSIRIS reactor which was started on the 22nd of September. The results of the plates inspection are presented here as well as the irradiation conditions. (author)

  14. Nonlinear Cross-Diffusion with Size Exclusion

    KAUST Repository

    Burger, Martin

    2010-01-01

    The aim of this paper is to investigate the mathematical properties of a continuum model for diffusion of multiple species incorporating size exclusion effects. The system for two species leads to nonlinear cross-diffusion terms with double degeneracy, which creates significant novel challenges in the analysis of the system. We prove global existence of weak solutions and well-posedness of strong solutions close to equilibrium. We further study some asymptotics of the model, and in particular we characterize the large-time behavior of solutions. 2010 © Society for Industrial and Applied Mathematics.

  15. Static phantom wormholes of finite size

    Science.gov (United States)

    Cataldo, Mauricio; Orellana, Fabian

    2017-09-01

    In this paper we derive new static phantom traversable wormholes by assuming a shape function with a quadratic dependence on the radial coordinate r . We mainly focus our study on wormholes sustained by exotic matter with positive energy density (as seen by any static observer) and a variable equation of state pr/ρ wormhole spacetimes extending to infinity, we show that a quadratic shape function allows us to construct static spacetimes of finite size, composed of a phantom wormhole connected to an anisotropic spherically symmetric distribution of dark energy. The wormhole part of the full spacetime does not fulfill the dominant energy condition, while the dark energy part does.

  16. Firm size diversity, functional richness, and resilience

    Science.gov (United States)

    Garmestani, A.S.; Allen, Craig R.; Mittelstaedt, J.D.; Stow, C.A.; Ward, W.A.

    2006-01-01

    This paper applies recent advances in ecology to our understanding of firm development, sustainability, and economic development. The ecological literature indicates that the greater the functional richness of species in a system, the greater its resilience - that is, its ability to persist in the face of substantial changes in the environment. This paper focuses on the effects of functional richness across firm size on the ability of industries to survive in the face of economic change. Our results indicate that industries with a richness of industrial functions are more resilient to employment volatility. ?? 2006 Cambridge University Press.

  17. System for determining sizes of biological macromolecules

    International Nuclear Information System (INIS)

    Nelson, R.M.; Danby, P.C.

    1987-01-01

    An electrophoresis system for determining the sizes of radiolabelled biological macromolecules is described. It comprises a cell containing an electrophoresis gel and having at least one lane, a voltage source connected across the gel for effecting the movement of macromolecules in the lane, a detector fixed relative to the moving molecules for generating electrical pulses responsive to signals emitted by the radiolabelled molecules; a pulse processor for counting the pulse rate, and a computational device for comparing the pulse rate to a predetermined value. (author)

  18. Wide size range fast integrated mobility spectrometer

    Science.gov (United States)

    Wang, Jian

    2013-10-29

    A mobility spectrometer to measure a nanometer particle size distribution is disclosed. The mobility spectrometer includes a conduit and a detector. The conduit is configured to receive and provide fluid communication of a fluid stream having a charged nanometer particle mixture. The conduit includes a separator section configured to generate an electrical field of two dimensions transverse to a dimension associated with the flow of the charged nanometer particle mixture through the separator section to spatially separate charged nanometer particles of the charged nanometer particle mixture in said two dimensions. The detector is disposed downstream of the conduit to detect concentration and position of the spatially-separated nanometer particles.

  19. Effect of Particle Size on Shear Stress of Magnetorheological Fluids

    Directory of Open Access Journals (Sweden)

    Chiranjit Sarkar

    2015-05-01

    Full Text Available Magnetorheological fluids (MRF, known for their variable shear stress contain magnetisable micrometer-sized particles (few micrometer to 200 micrometers in a nonmagnetic carrier liquid. To avoid settling of particles, smaller sized (3-10 micrometers particles are preferred, while larger sized particles can be used in MR brakes, MR clutches, etc. as mechanical stirring action in those mechanisms does not allow particles to settle down. Ideally larger sized particles provide higher shear stress compared to smaller sized particles. However there is need to explore the effect of particle sizes on the shear stress. In the current paper, a comparison of different particle sizes on MR effect has been presented. Particle size distributions of iron particles were measured using HORIBA Laser Scattering Particle Size Distribution Analyser. The particle size distribution, mean sizes and standard deviations have been presented. The nature of particle shapes has been observed using scanning electron microscopy. To explore the effect of particle sizes, nine MR fluids containing small, large and mixed sized carbonyl iron particles have been synthesized. Three concentrations (9%, 18% and 36% by volume for each size of particles have been used. The shear stresses of those MRF samples have been measured using ANTON PAAR MCR-102 Rheometer. With increase in volume fraction of iron particles, the MR fluids synthesized using “mixed sized particles” show better shear stress compared to the MR fluids containing “smaller sized spherical shaped particles” and “larger sized flaked shaped particles” at higher shear rate.

  20. Nutrient management practices among swine operations of various sizes.

    Science.gov (United States)

    Hassinger, W J; Monahan, K A; Scanlon, T L; Parsons, T D

    2000-11-15

    To determine feeding, cropping, and manure-handling practices of swine operations of various sizes. Producer survey. 85 sow units and 132 finish floors. Swine producers were surveyed by mail and during farm visits for information regarding herd characteristics and management practices, with emphasis on the 3 components of the nutrient cycle: cropping, feeding and nutrition, and manure handling. Farms were categorized by operation type as sow units or finish floors and, subsequently, stratified by size as small sow units ( or = 600 head), small finish floors ( or = 2,000 head). Large sow units and large finish floors were approximately twice as likely to use environmentally sound nutrient management practices as small sow units or small finish floors. These large operations were more likely to use progressive feeding practices, to be aware of their nutrient flows, and to be capable of using these nutrients properly. There is a need for greater environmental awareness among all swine producers, especially among small producers. This provides a possible growth area for large-animal veterinary consultants. Economy of scale and increased governmental regulations allow large farms to use environmentally sound practices. Thus, large swine farms are not necessarily harmful to the environment.

  1. Pain tolerance predicts human social network size.

    Science.gov (United States)

    Johnson, Katerina V-A; Dunbar, Robin I M

    2016-04-28

    Personal social network size exhibits considerable variation in the human population and is associated with both physical and mental health status. Much of this inter-individual variation in human sociality remains unexplained from a biological perspective. According to the brain opioid theory of social attachment, binding of the neuropeptide β-endorphin to μ-opioid receptors in the central nervous system (CNS) is a key neurochemical mechanism involved in social bonding, particularly amongst primates. We hypothesise that a positive association exists between activity of the μ-opioid system and the number of social relationships that an individual maintains. Given the powerful analgesic properties of β-endorphin, we tested this hypothesis using pain tolerance as an assay for activation of the endogenous μ-opioid system. We show that a simple measure of pain tolerance correlates with social network size in humans. Our results are in line with previous studies suggesting that μ-opioid receptor signalling has been elaborated beyond its basic function of pain modulation to play an important role in managing our social encounters. The neuroplasticity of the μ-opioid system is of future research interest, especially with respect to psychiatric disorders associated with symptoms of social withdrawal and anhedonia, both of which are strongly modulated by endogenous opioids.

  2. Critical size of ego communication networks

    Science.gov (United States)

    Wang, Qing; Gao, Jian; Zhou, Tao; Hu, Zheng; Tian, Hui

    2016-06-01

    With the help of information and communication technologies, studies on the overall social networks have been extensively reported recently. However, investigations on the directed Ego Communication Networks (ECNs) remain insufficient, where an ECN stands for a sub network composed of a centralized individual and his/her direct contacts. In this paper, the directed ECNs are built on the Call Detail Records (CDRs), which cover more than 7 million people of a provincial capital city in China for half a year. Results show that there is a critical size for ECN at about 150, above which the average emotional closeness between ego and alters drops, the balanced relationship between ego and network collapses, and the proportion of strong ties decreases. This paper not only demonstrate the significance of ECN size in affecting its properties, but also shows accordance with the “Dunbar's Number”. These results can be viewed as a cross-culture supportive evidence to the well-known Social Brain Hypothesis (SBH).

  3. Size Segregation in Sheared Jammed Colloids

    Science.gov (United States)

    Mbi, Armstrong; Blair, Daniel

    2013-03-01

    It is well known that granular materials can spontaneously size segregate when continuously driven. However, in jammed colloidal suspensions, this phenomenon is not well understood. Colloidal dispersions provide a unique system to study the structure and dynamics of jammed matter. In this talk, we present results of size segregation of a continuously sheared binary colloidal suspension well above point J. Our colloidal system is comprised of indexed-matched bi-disperse silica particles with diameters a = { 2 . 3 μm and 3 . 2 μm } and at ϕ 61 % , well above the colloidal glass transition. We apply a highly controlled shear at a constant shear rate through the use of a rheometer. By coupling our rheometer with a high-speed laser scanning confocal microscope, we directly image the structure and flow profiles of the suspension as it un-jams. We observe migration of the small and large species; large particles move to the top while the small particles move toward the bottom conserving the total volume fraction in all regions. Moreover, we find that an associating feature of segregation is a sustained shear band. Our results are consistent with a recently proposed void filling and squeeze expulsion mechanism. Funding is provided by NSF DMR #0847490.

  4. Medium-size power plants. Economic options

    International Nuclear Information System (INIS)

    Vogelweith, L.; Baujat, J.; Goutail, J.

    1978-01-01

    In this paper the authors describe a method for economic evaluation of a nuclear power plant project such as advocated by the IAEA but modified through the introduction of various parameters that may affect the evaluation, i.e. the weighted evaluation rate, the annual increase in the cost of fuel, and the discount rate. The method is applied to barge-based medium-size reactors (125 MW(e)). The authors calculate the investment cost, together with the costs of administration, operation and maintenance; use is made of current assumptions regarding the price of fuel for the case of a reference nuclear plant and an oil-fired plant of the same power and in the same programme. In this way the authors derive the discounted cost of the nuclear programme and concurrent conventional programme on the basis of the following assumptions: a weighted inflation rate varying between 0 and 6% per year; an annual increase in real fuel prices ranging from 0 to 3%; and a real discount rate, equal to the real interest rate, varying between 4 and 7% per year and corresponding to nominal discount rates of up to 13.4%. The conclusion reached is that, given the real interest rates actually prevailing on the financial market, a weighted inflation rate foreseen by the majority of experts, and a rise in real fuel prices of the order of 1% per year, the medium-size nuclear power plant is more economical than a conventional plant of the same output. (author)

  5. Does size matter in platelet production?

    Science.gov (United States)

    Thon, Jonathan N.

    2012-01-01

    Platelet (PLT) production represents the final stage of megakaryocyte (MK) development. During differentiation, bone marrow MKs extend and release long, branched proPLTs into sinusoidal blood vessels, which undergo repeated abscissions to yield circulating PLTs. Circular-prePLTs are dynamic intermediate structures in this sequence that have the capacity to reversibly convert into barbell-proPLTs and may be related to “young PLTs” and “large PLTs” of both inherited and acquired macrothrombocytopenias. Conversion is regulated by the diameter and thickness of the peripheral microtubule coil, and PLTs are capable of enlarging in culture to generate barbell-proPLTs that divide to yield 2 smaller PLT products. Because PLT number and size are inversely proportional, this raises the question: do macrothrombocytopenias represent a failure in the intermediate stages of PLT production? This review aims to bring together and contextualize our current understanding of terminal PLT production against the backdrop of human macrothrombocytopenias to establish how “large PLTs” observed in both conditions are similar, how they are different, and what they can teach us about PLT formation. A better understanding of the cytoskeletal mechanisms that regulate PLT formation and determine PLT size offers the promise of improved therapies for clinical disorders of PLT production and an important source of PLTs for infusion. PMID:22665937

  6. Finite-size effects from giant magnons

    Energy Technology Data Exchange (ETDEWEB)

    Arutyunov, Gleb [Institute for Theoretical Physics and Spinoza Institute, Utrecht University, 3508 TD Utrecht (Netherlands)]. E-mail: g.arutyunov@phys.uu.nl; Frolov, Sergey [Max-Planck-Institut fuer Gravitationsphysik, Albert-Einstein-Institut, Am Muehlenberg 1, D-14476 Potsdam (Germany)]. E-mail: frolovs@aei.mpg.de; Zamaklar, Marija [Max-Planck-Institut fuer Gravitationsphysik, Albert-Einstein-Institut, Am Muehlenberg 1, D-14476 Potsdam (Germany)]. E-mail: marzam@aei.mpg.de

    2007-08-27

    In order to analyze finite-size effects for the gauge-fixed string sigma model on AdS{sub 5}xS{sup 5}, we construct one-soliton solutions carrying finite angular momentum J. In the infinite J limit the solutions reduce to the recently constructed one-magnon configuration of Hofman and Maldacena. The solutions do not satisfy the level-matching condition and hence exhibit a dependence on the gauge choice, which however disappears as the size J is taken to infinity. Interestingly, the solutions do not conserve all the global charges of the psu(2,2-vertical bar4) algebra of the sigma model, implying that the symmetry algebra of the gauge-fixed string sigma model is different from psu(2,2-vertical bar4) for finite J, once one gives up the level-matching condition. The magnon dispersion relation exhibits exponential corrections with respect to the infinite J solution. We also find a generalisation of our one-magnon configuration to a solution carrying two charges on the sphere. We comment on the possible implications of our findings for the existence of the Bethe ansatz describing the spectrum of strings carrying finite charges.

  7. Adenoidal size in lateral roentgenogram of skull

    Energy Technology Data Exchange (ETDEWEB)

    Won, H. S.; Byun, Y. S.; Hahm, C. K.; Kim, J. J. [College of Medicine, Hanyang University, Seoul (Korea, Republic of)

    1983-03-15

    Adenoid is a kind of tonsil located in the posterior wall of the nasopharynx. Enlargement of the adenoid can produce obstruction of the nasopharynx and eustachian tube. Disturbance in discharge of nasal and paranasal secretions can be a cause of chronic rhinitis, sinusitis and otitis media. The diagnosis of enlarged adenoid by inspection is difficult due to its location. In the lateral roentgenogram of the skull the anterior wall of the adenoid is sharply delineated by air in the nasopharynx. The authors measured the sizes of adenoid and nasopharynx and calculated the adenoid-nasopharyngeal ratio (AN ratio) from 1,000 simple skull lateral roentgenograms of the children between the age of 0 to 16 years. Adenoid size is gradually increasing in the children up to 9 years of age but almost uncharged in the older age group. The AN ratio is highest in the age group of 8-9 years. In the age groups above 9 years of age the AN ratio is gradually decreased due to atrophic changes of the adenoid.

  8. Adenoidal size in lateral roentgenogram of skull

    International Nuclear Information System (INIS)

    Won, H. S.; Byun, Y. S.; Hahm, C. K.; Kim, J. J.

    1983-01-01

    Adenoid is a kind of tonsil located in the posterior wall of the nasopharynx. Enlargement of the adenoid can produce obstruction of the nasopharynx and eustachian tube. Disturbance in discharge of nasal and paranasal secretions can be a cause of chronic rhinitis, sinusitis and otitis media. The diagnosis of enlarged adenoid by inspection is difficult due to its location. In the lateral roentgenogram of the skull the anterior wall of the adenoid is sharply delineated by air in the nasopharynx. The authors measured the sizes of adenoid and nasopharynx and calculated the adenoid-nasopharyngeal ratio (AN ratio) from 1,000 simple skull lateral roentgenograms of the children between the age of 0 to 16 years. Adenoid size is gradually increasing in the children up to 9 years of age but almost uncharged in the older age group. The AN ratio is highest in the age group of 8-9 years. In the age groups above 9 years of age the AN ratio is gradually decreased due to atrophic changes of the adenoid

  9. THE EFFECT OF PROJECTION ON DERIVED MASS-SIZE AND LINEWIDTH-SIZE RELATIONSHIPS

    International Nuclear Information System (INIS)

    Shetty, Rahul; Kauffmann, Jens; Goodman, Alyssa A.; Collins, David C.; Norman, Michael L.; Rosolowsky, Erik W.

    2010-01-01

    Power-law mass-size and linewidth-size correlations, two of 'Larson's laws', are often studied to assess the dynamical state of clumps within molecular clouds. Using the result of a hydrodynamic simulation of a molecular cloud, we investigate how geometric projection may affect the derived Larson relationships. We find that large-scale structures in the column density map have similar masses and sizes to those in the three-dimensional simulation (position-position-position, PPP). Smaller scale clumps in the column density map are measured to be more massive than the PPP clumps, due to the projection of all emitting gas along lines of sight. Further, due to projection effects, structures in a synthetic spectral observation (position-position-velocity, PPV) may not necessarily correlate with physical structures in the simulation. In considering the turbulent velocities only, the linewidth-size relationship in the PPV cube is appreciably different from that measured from the simulation. Including thermal pressure in the simulated line widths imposes a minimum line width, which results in a better agreement in the slopes of the linewidth-size relationships, though there are still discrepancies in the offsets, as well as considerable scatter. Employing commonly used assumptions in a virial analysis, we find similarities in the computed virial parameters of the structures in the PPV and PPP cubes. However, due to the discrepancies in the linewidth-size and mass-size relationships in the PPP and PPV cubes, we caution that applying a virial analysis to observed clouds may be misleading due to geometric projection effects. We speculate that consideration of physical processes beyond kinetic and gravitational pressure would be required for accurately assessing whether complex clouds, such as those with highly filamentary structure, are bound.

  10. Parameterizing Size Distribution in Ice Clouds

    Energy Technology Data Exchange (ETDEWEB)

    DeSlover, Daniel; Mitchell, David L.

    2009-09-25

    PARAMETERIZING SIZE DISTRIBUTIONS IN ICE CLOUDS David L. Mitchell and Daniel H. DeSlover ABSTRACT An outstanding problem that contributes considerable uncertainty to Global Climate Model (GCM) predictions of future climate is the characterization of ice particle sizes in cirrus clouds. Recent parameterizations of ice cloud effective diameter differ by a factor of three, which, for overcast conditions, often translate to changes in outgoing longwave radiation (OLR) of 55 W m-2 or more. Much of this uncertainty in cirrus particle sizes is related to the problem of ice particle shattering during in situ sampling of the ice particle size distribution (PSD). Ice particles often shatter into many smaller ice fragments upon collision with the rim of the probe inlet tube. These small ice artifacts are counted as real ice crystals, resulting in anomalously high concentrations of small ice crystals (D < 100 µm) and underestimates of the mean and effective size of the PSD. Half of the cirrus cloud optical depth calculated from these in situ measurements can be due to this shattering phenomenon. Another challenge is the determination of ice and liquid water amounts in mixed phase clouds. Mixed phase clouds in the Arctic contain mostly liquid water, and the presence of ice is important for determining their lifecycle. Colder high clouds between -20 and -36 oC may also be mixed phase but in this case their condensate is mostly ice with low levels of liquid water. Rather than affecting their lifecycle, the presence of liquid dramatically affects the cloud optical properties, which affects cloud-climate feedback processes in GCMs. This project has made advancements in solving both of these problems. Regarding the first problem, PSD in ice clouds are uncertain due to the inability to reliably measure the concentrations of the smallest crystals (D < 100 µm), known as the “small mode”. Rather than using in situ probe measurements aboard aircraft, we employed a treatment of ice

  11. Offspring fitness and individual optimization of clutch size

    NARCIS (Netherlands)

    Both, C.; Tinbergen, J.M.; Van Noordwijk, A.J.

    1998-01-01

    Within-year variation in clutch size has been claimed to be an adaptation to variation in the individual capacity to raise offspring. We tested this hypothesis by manipulating brood size to one common size, and predicted that if clutch size is individually optimized, then birds with originally large

  12. Size effect in the strength of concrete structures

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Karihaloo's size effect formula are also proposed. Keywords. Fictitious crack model; fracture process zone (FPZ); high strength concrete (HSC); size effect; three point bend (TPB) beam. 1. Introduction. The fracture mechanics size effect, as opposed to the Weibull statistical size effect, is a controversial topic in the fracture of ...

  13. Uterine size and ovarian size in adolescents with functional hypothalamic amenorrhoea.

    Science.gov (United States)

    Bumbuliene, Zana; Klimasenko, Jelena; Sragyte, Diana; Zakareviciene, Jolita; Drasutiene, Grazina

    2015-10-01

    Functional hypothalamic amenorrhoea (FHA) is a condition characterised by the absence of menses due to suppression of the hypothalamic-pituitary-ovarian axis. The purpose of the study was to estimate uterine and ovarian sizes in adolescents with FHA and to compare these results with findings in peers having regular menstrual cycles. Prospective case-controlled study. Vilnius University Hospital Santariskiu Klinikos, Lithuania. Lithuanian adolescents--45 with FHA and 40 comparison group participants. We assessed ultrasound measurements of internal reproductive organs, levels of luteinising hormone, follicle-stimulating hormone, prolactin, oestradiol and calculated body mass index (BMI). The mean age of the participants was 16.3 ± 1.2 years, the mean age after menarche--3.6 years. In adolescents with FHA the BMI was 17.8 ± 1.8 kg/m(2) and 20.4 ± 1.4 kg/m(2) in the comparison group, p adolescents with FHA the dimensions of uterus and ovaries were smaller than in girls having regular menstrual cycles. Our study confirmed the influence of oestrogen on uterus size: oestrogen deficiency causes a reduction in uterine size. Uterine size and ovarian size correlate positively with BMI. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  14. Unravelling anisogamy: egg size and ejaculate size mediate selection on morphology in free-swimming sperm.

    Science.gov (United States)

    Monro, Keyne; Marshall, Dustin J

    2016-07-13

    Gamete dimorphism (anisogamy) defines the sexes in most multicellular organisms. Theoretical explanations for its maintenance usually emphasize the size-related selection pressures of sperm competition and zygote survival, assuming that fertilization of all eggs precludes selection for phenotypes that enhance fertility. In external fertilizers, however, fertilization is often incomplete due to sperm limitation, and the risk of polyspermy weakens the advantage of high sperm numbers that is predicted to limit sperm size, allowing alternative selection pressures to target free-swimming sperm. We asked whether egg size and ejaculate size mediate selection on the free-swimming sperm of Galeolaria caespitosa, a marine tubeworm with external fertilization, by comparing relationships between sperm morphology and male fertility across manipulations of egg size and sperm density. Our results suggest that selection pressures exerted by these factors may aid the maintenance of anisogamy in external fertilizers by limiting the adaptive value of larger sperm in the absence of competition. In doing so, our study offers a more complete explanation for the stability of anisogamy across the range of sperm environments typical of this mating system and identifies new potential for the sexes to coevolve via mutual selection pressures exerted by gametes at fertilization. © 2016 The Author(s).

  15. Right sizing prevention. Food portion size effects on children's eating and weight.

    Science.gov (United States)

    Birch, Leann L; Savage, Jennifer S; Fisher, Jennifer Orlet

    2015-05-01

    Experimental findings provide consistent evidence that increasing the portion size of palatable, energy dense entrees relative to an age appropriate reference portion increases children's energy intake of the entree and the meal. Most of these studies have been conducted on preschool aged children between 2 and 6 years of age, in childcare or laboratory settings, using repeated measures designs. In these studies, children's intake is compared across a series of meals, where the size of the entrée portion is varied and other aspects of the meal, including the portion size of other items on the menu, are held constant. This paper provides an overview of what we know from this research, what is not known about the effects of portion size on children's intake and weight status, and points to some of the important unanswered questions and gaps in the literature. Lastly, we discuss how individual characteristics may make someone more or less susceptible to large portions of foods and how the palatability of foods may moderate observed associations among portion size, children's intake, and weight status. Future studies that address the gaps identified in this paper are needed to inform policy and to develop effective and efficient interventions to prevent childhood obesity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Inferring Past Effective Population Size from Distributions of Coalescent Times

    OpenAIRE

    Gattepaille, Lucie; G?nther, Torsten; Jakobsson, Mattias

    2016-01-01

    Inferring and understanding changes in effective population size over time is a major challenge for population genetics. Here we investigate some theoretical properties of random-mating populations with varying size over time. In particular, we present an exact solution to compute the population size as a function of time, N e ( t ) , based on distributions of coalescent times of samples of any size. This result reduces the problem of population size inference to a problem of estimating coale...

  17. Project size and common pool size: An empirical test using Danish municipal mergers

    DEFF Research Database (Denmark)

    Hansen, Sune Welling

    The paper examines the proposition that project size tends to increase with common pool size from the law of 1 over n (Weingast et al, 1981). This remains under-investigated and a recent study conducted by Primo & Snyder (2008) argues, and empirically substantiates, a reverse law of 1 over n....... In this paper, the proposition is examined using recent municipal mergers in Denmark as a crucial case under less favorable conditions. The paper finds positive, statistically and economically significant effects of common pool size in the ultimate year of the treatment period. These results are consistent...... across two research designs, two outcome variables, two subsamples, and several model specifications The implications of the findings, combined with the limited potential for empirically testing Primo & Snyder’s alternative model, suggest a re-appreciation of the law of 1 over n as it was originally...

  18. Finite size effects in the intermittency analysis of the fragment-size correlations

    International Nuclear Information System (INIS)

    Bozek, P.; Ploszajczak, M.; Tucholski, A.

    1991-01-01

    An influence of the finite size effect on the fragment-size correlations in the nuclear multifragmentation is studied using the method of scaled factorial moments for a 1 - dim percolation model and for a statistical model of the fragmentation process, which for a certain value of a tuning parameter yields the power-law behaviour of the fragment-size distribution. It is shown that the statistical models of this type contain only repulsive correlations due to the conservation laws. The comparison of the results with those obtained in the non-critical 1 - dim percolation and in the 3 - dim percolation at around the critical point is presented. Correlations in the 1 - dim percolation model are analysed analytically and the mechanism of the attractive correlations in 1 - dim and 3 - dim is identified. (author) 30 refs., 7 figs

  19. Size Matters: Penis Size and Sexual Position in Gay Porn Profiles.

    Science.gov (United States)

    Brennan, Joseph

    2018-01-01

    This article combines qualitative and quantitative textual approaches to the representation of penis size and sexual position of performers in 10 of the most visited gay pornography Web sites currently in operation. Specifically, in excess of 6,900 performer profiles sourced from 10 commercial Web sites are analyzed. Textual analysis of the profile descriptions is combined with a quantitative representation of disclosed penis size and sexual position, which is presented visually by two figures. The figures confirm that these sites generally market themselves as featuring penises that are extraordinarily large and find a sample-wide correlation between smaller penis sizes (5-6.5 inches) and receptive sexual acts (bottoming), and larger (8.5-13 inches) with penetrative acts (topping). These observations are supported through the qualitative textual readings of how the performers are described on these popular sites, revealing the narratives and marketing strategies that shape the construction of popular porn brands, performers, and profitable fantasies.

  20. A Study on Optimal Sizing of Pipeline Transporting Equi-sized Particulate Solid-Liquid Mixture

    International Nuclear Information System (INIS)

    Asim, Taimoor; Mishra, Rakesh; Pradhan, Suman; Ubbi, Kuldip

    2012-01-01

    Pipelines transporting solid-liquid mixtures are of practical interest to the oil and pipe industry throughout the world. Such pipelines are known as slurry pipelines where the solid medium of the flow is commonly known as slurry. The optimal designing of such pipelines is of commercial interests for their widespread acceptance. A methodology has been evolved for the optimal sizing of a pipeline transporting solid-liquid mixture. Least cost principle has been used in sizing such pipelines, which involves the determination of pipe diameter corresponding to the minimum cost for given solid throughput. The detailed analysis with regard to transportation of slurry having solids of uniformly graded particles size has been included. The proposed methodology can be used for designing a pipeline for transporting any solid material for different solid throughput.

  1. Sizing of high-pressure restriction orifices

    International Nuclear Information System (INIS)

    Casado Flores, E.

    1995-01-01

    Constant up-grading of power plants sometimes requires the modification of components which form part of suppliers' packages. In order to protect technology they have developed, however, the suppliers do not supply their calculation criteria. In order to reduce the costs of such improvements, and so as to be able to undertake the modification without having to rely on the original supplier, this paper describes the basic criteria applicable to the study of high-pressure restriction orifices, which can be considered to be representative of the components in question. The restriction orifices discussed are: - Insert - Multiplates in series with one perforation in each plate - Multiplates in series with several perforations in each plate For each type, an explanation of their sizing is given, together with the equations relating the corresponding flow and pressure drop. (Author)

  2. Measuring bacterial cells size with AFM

    Directory of Open Access Journals (Sweden)

    Denise Osiro

    2012-03-01

    Full Text Available Atomic Force Microscopy (AFM can be used to obtain high-resolution topographical images of bacteria revealing surface details and cell integrity. During scanning however, the interactions between the AFM probe and the membrane results in distortion of the images. Such distortions or artifacts are the result of geometrical effects related to bacterial cell height, specimen curvature and the AFM probe geometry. The most common artifact in imaging is surface broadening, what can lead to errors in bacterial sizing. Several methods of correction have been proposed to compensate for these artifacts and in this study we describe a simple geometric model for the interaction between the tip (a pyramidal shaped AFM probe and the bacterium (Escherichia coli JM-109 strain to minimize the enlarging effect. Approaches to bacteria immobilization and examples of AFM images analysis are also described.

  3. College athletics, body size, and cancer mortality

    Energy Technology Data Exchange (ETDEWEB)

    Polednak, A.P.

    1976-07-01

    Data are presented on mortality from neoplasms as determined from death certificates in a cohort of 8393 college men, according to athletic status in college. Major athletes (lettermen) died significantly more often from neoplasms than nonathletes. Mean age at death from neoplasms (underlying cause) was significantly lower in major athletes than in both minor athletes and nonathletes. After matching major athletes with nonathletes of comparable body size (height and weight), differences in proportional mortality and mean age at death from neoplasms persisted, although not statistically significant for the smaller samples. Correlation coefficients (Pearson r) and partial r's between weight in college and age at death from neoplasms were negative but of low magnitude. Some possible explanations for the differences between major athletes and nonathletes are discussed.

  4. Cometary dust size distributions from flyby spacecraft

    International Nuclear Information System (INIS)

    Divine, N.

    1988-01-01

    Pior to the Halley flybys in 1986, the distribution of cometary dust grains with particle size were approximated using models which provided reasonable fits to the dynamics of dust tails, anti-tails, and infrared spectra. These distributions have since been improved using fluence data (i.e., particle fluxes integrated over time along the flyby trajectory) from three spacecraft. The fluence derived distributions are appropriate for comparison with simultaneous infrared photometry (from Earth) because they sample the particles in the same way as the IR data do (along the line of sight) and because they are directly proportional to the concentration distribution in that region of the coma which dominates the IR emission

  5. Utility-sized Madaras wind plants

    Science.gov (United States)

    Whitford, D. H.; Minardi, J. E.

    1981-01-01

    An analysis and technological updating were conducted for the Madaras Rotor Power Plant concept, to determine its ability to compete both technically and economically with horizontal axis wind turbine generators currently under development. The Madaras system uses large cylinders rotating vertically atop each regularly spaced flatcar of a train to propel them, by means of Magnus-effect interaction with the wind, along a circular or oval track. Alternators geared to the wheels of each car generate electrical power, which is transmitted to a power station by a trolley system. The study, consisting of electromechanical design, wind tunnel testing, and performance and cost analyses, shows that utility-sized plants greater than 228 MW in capacity and producing 975,000 kWh/year are feasible. Energy costs for such plants are projected to be between 22% lower and 12% higher than horizontal axis turbine plants of comparable output.

  6. Los Alamos Transuranic Waste Size Reduction Facility

    International Nuclear Information System (INIS)

    Harper, J.; Warren, J.

    1987-06-01

    The Los Alamos Transuranic (TRU) Waste Size Reduction Facility (SRF) is a production oriented prototype. The facility is operated to remotely cut and repackage TRU contaminated metallic wastes (e.g., glove boxes, ducting and pipes) for eventual disposal at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The resulting flat sections are packaged into a tested Department of Transportation Type 7A metal container. To date, the facility has successfully processed stainless steel glove boxes (with and without lead shielding construction) and retention tanks. We have found that used glove boxes generate more cutting fumes than do unused glove boxes or metal plates - possibly due to deeply embedded chemical residues from years of service. Water used as a secondary fluid with the plasma arc cutting system significantly reduces visible fume generation during the cutting of used glove boxes and lead-lined glove boxes. 2 figs., 1 tab

  7. Los Alamos Transuranic Waste Size Reduction Facility

    International Nuclear Information System (INIS)

    Harper, J.; Warren, J.

    1987-01-01

    The Los Alamos Transuranic (TRU) Waste Size Reduction Facility (SRF) is a production oriented prototype completed in 1981 and later modified during 1986 to enhance production. The facility is operated to remotely cut (with a plasma arc torch) and repackage TRU contaminated metallic wastes (e.g., glove boxes, ducting and pipes) for eventual disposal at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The resulting flat sections are packaged into a tested Department of Transportation Type 7A metal container. To date, the facility has successfully processed stainless steel glove boxes (with and without lead shielding construction) and retention tanks. It was found that used glove boxes generate more cutting fumes than do unused glove boxes or metal plates - possibly due to deeply embedded chemical residues from years of service. Water used as a secondary fluid with the plasma arc cutting system significantly reduces visible fume generation during the cutting of used glove boxes and lead-lined glove boxes

  8. Size-Effects in Void Growth

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof

    2005-01-01

    The size-effect on ductile void growth in metals is investigated. The analysis is based on unit cell models both of arrays of cylindrical voids under plane strain deformation, as well as arrays of spherical voids using an axisymmetric model. A recent finite strain generalization of two higher order...... strain gradient plasticity models is implemented in a finite element program, which is used to study void growth numerically. The results based on the two models are compared. It is shown how gradient effects suppress void growth on the micron scale when compared to predictions based on conventional...... models. This increased resistance to void growth, due to gradient hardening, is accompanied by an increase in the overall strength for the material. Furthermore, for increasing initial void volume fraction, it is shown that the effect of gradients becomes more important to the overall response but less...

  9. Shoosing the appropriate size wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Lynette, R. [FloWind Corp., San Rafael, CA (United States)

    1996-12-31

    Within the past several years, wind turbines rated at 400 kW and higher have been introduced into the market, and some manufacturers are developing machines rated at 750 - 1,000+ kW. This raises the question: What is the appropriate size for utility-grade wind turbines today? The answer depends upon the site where the machines will be used and the local conditions. The issues discussed in the paper are: (1) Site-Related (a) Visual, noise, erosion, television interference, interference with aviation (b) Siting efficiency (2) Logistics (a) Adequacy of roads and bridges to accept large vehicles (b) Availability and cost of cranes for erection and maintenance (c) Capability of local repair/overhauls (3) Cost Effectiveness (a) Capital costs (1) Wind Turbine (2) Infrastructure costs (b) Maintenance costs (4) Technical/Financial Risk. 1 fig., 1 tab.

  10. Collaborative innovation effort and size in alliances

    DEFF Research Database (Denmark)

    Asikainen, Anna-Leena; Radziwon, Agnieszka

    This study presents quantitative investigation of the factors that influence the process of forming strategic alliances with a special focus on the role of innovation strategies and firm’s size in alliance building process. The empirical sample is based on a large scale data from the Community...... Innovation Survey 2010 – 12 and covers the representation of 12 EU Member States. The main findings indicate that product and process innovations do not seem to show any significant influence on the likelihood of building the alliances, whereas this likelihood increases along with the introduction...... of organisational and marketing innovations. Additionally, small firms were more likely (than large) to engage into alliances as a part of their strategy. On more general level our data also confirm that factors such as: number of highly educated employees, foreign ownership of a firm and presence of firm...

  11. This is the size of one meter

    DEFF Research Database (Denmark)

    Davidsen, Jacob; Ryberg, Thomas

    2017-01-01

    In CSCL studies, language is often foregrounded as the primary resource for engaging in collaborative learning, while the body is more often positioned as a secondary resource. There is, however, a growing interest in the body as a resource in learning and collaboration in and outside CSCL......, the pair engages in a discussion regarding the size of one meter through language, gestures and manipulation of the material resources. The analysis shows two distinct ways of understanding the length of one meter, which primarily are visible through the children’s gestures and bodily movements....... In the analysis we show how the children dynamically produce body-material resources for communicative and illustrative purposes; moreover, they use body-material resources as a cognitive tool and as a way of shepherding each other. The study forms part of a body of studies analysing and theorizing the body...

  12. Determination of the molecular size of the hepatic H1-receptor by target size analysis

    International Nuclear Information System (INIS)

    Wang, N.P.; Fukui, H.; Matsuoka, H.; Wada, H.

    1986-01-01

    The molecular sizes of histamine H1-receptors of rat, rabbit, human, pig, guinea-pig, chicken, dog, and bovine liver were investigated by radiation inactivation and determined to be 100,000 to 160,000 daltons in all the animals examined. Statistical analysis showed that the hepatic H1-receptors have a common size of 128,000 +/- 63,000 daltons. Saturation analysis showed that the [3H]mepyramine binding constant was not changed by irradiation, while the binding capacity decreased with increase in the radiation dose

  13. Determination of the molecular size of the hepatic H1-receptor by target size analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wang, N.P.; Fukui, H.; Matsuoka, H.; Wada, H.

    1986-06-13

    The molecular sizes of histamine H1-receptors of rat, rabbit, human, pig, guinea-pig, chicken, dog, and bovine liver were investigated by radiation inactivation and determined to be 100,000 to 160,000 daltons in all the animals examined. Statistical analysis showed that the hepatic H1-receptors have a common size of 128,000 +/- 63,000 daltons. Saturation analysis showed that the (3H)mepyramine binding constant was not changed by irradiation, while the binding capacity decreased with increase in the radiation dose.

  14. Size-dependent cytotoxicity and inflammatory responses of PEGylated silica-iron oxide nanocomposite size series

    Science.gov (United States)

    Injumpa, Wishulada; Ritprajak, Patcharee; Insin, Numpon

    2017-04-01

    Iron oxides nanoparticles have been utilized in biological systems and biomedical applications for many years because they are relatively safe and stable comparing to other magnetic nanomaterials. In some applications, iron oxide nanoparticles were modified with silica in order to be more stable in biological systems and able to be functionalized with various functional groups. Moreover, poly(ethylene glycol) (PEG) was one on the most used polymer to graft onto the nanoparticles in order to increase their biocompatibility, dispersibility and stability in aqueous solutions. Therefore, the nanocomposites comprising iron oxide nanoparticles, silica, and PEG could become multifunctional carriers combining superparamagnetic character, multi-functionality and high stability in biological environments. Herein, we reported the preparation of the nanocomposites and effects of their sizes on cytotoxicity and inflammatory responses. The PEGylated silica-iron oxide nanocomposites were prepared by coating of poly(poly(ethylene glycol) monomethyl ether methacrylate) (PPEGMA) on magnetic nanoparticle-silica nanocomposites via Atom Transfer Radical Polymerization (ATRP). The iron oxide nanoparticles were synthesized using a thermal decomposition method. The silica shells were then coated on iron oxides nanoparticles using reverse microemulsion and sol-gel methods. The size series of the nanocomposites with the diameter of 24.86±4.38, 45.24±5.00, 98.10±8.88 and 202.22±6.70 nm as measured using TEM were obtained. Thermogravimetric analysis (TGA) was used for the determination of % weight of PPEGMA on the nanocomposites showing the weight loss of ranging from 65% for smallest particles to 30% for largest particles. The various sizes (20, 40, 100, 200 nm) and concentrations (10, 100, 1000 μg/mL) of the nanocomposites were tested for their cytotoxicity in fibroblast and macrophage cell lines using MTT assay. The different sizes did not affect cell viability of fibroblast, albeit

  15. On being the right size: increased body size is associated with reduced telomere length under natural conditions

    OpenAIRE

    Ringsby, Thor Harald; Jensen, Henrik; Pärn, Henrik; Kvalnes, Thomas; Boner, Winnie; Gillespie, Robert; Holand, Håkon; Hagen, Ingerid Julie; Rønning, Bernt; Sæther, Bernt-Erik; Monaghan, Pat

    2015-01-01

    Evolution of body size is likely to involve trade-offs between body size, growth rate and longevity. Within species, larger body size is associated with faster growth and ageing, and reduced longevity, but the cellular processes driving these relationships are poorly understood. One mechanism that might play a key role in determining optimal body size is the relationship between body size and telomere dynamics. However, we know little about how telomere length is affected when selection for l...

  16. Size structuring and allometric scaling relationships in coral reef fishes.

    Science.gov (United States)

    Dunic, Jillian C; Baum, Julia K

    2017-05-01

    Temperate marine fish communities are often size-structured, with predators consuming increasingly larger prey and feeding at higher trophic levels as they grow. Gape limitation and ontogenetic diet shifts are key mechanisms by which size structuring arises in these communities. Little is known, however, about size structuring in coral reef fishes. Here, we aimed to advance understanding of size structuring in coral reef food webs by examining the evidence for these mechanisms in two groups of reef predators. Given the diversity of feeding modes amongst coral reef fishes, we also compared gape size-body size allometric relationships across functional groups to determine whether they are reliable indicators of size structuring. We used gut content analysis and quantile regressions of predator size-prey size relationships to test for evidence of gape limitation and ontogenetic niche shifts in reef piscivores (n = 13 species) and benthic invertivores (n = 3 species). We then estimated gape size-body size allometric scaling coefficients for 21 different species from four functional groups, including herbivores/detritivores, which are not expected to be gape-limited. We found evidence of both mechanisms for size structuring in coral reef piscivores, with maximum prey size scaling positively with predator body size, and ontogenetic diet shifts including prey type and expansion of prey size. There was, however, little evidence of size structuring in benthic invertivores. Across species and functional groups, absolute and relative gape sizes were largest in piscivores as expected, but gape size-body size scaling relationships were not indicative of size structuring. Instead, relative gape sizes and mouth morphologies may be better indicators. Our results provide evidence that coral reef piscivores are size-structured and that gape limitation and ontogenetic niche shifts are the mechanisms from which this structure arises. Although gape allometry was not indicative of

  17. Critical sizes and critical characteristics of nanoclusters, nanostructures and nanomaterials

    International Nuclear Information System (INIS)

    Suzdalev, I.P.

    2005-01-01

    Full text: Critical sizes and characteristics of nanoclusters and nanostructures are introduced as the parameters of nanosystems and nanomaterials. The next critical characteristics are considered: atomic and electronic 'magic number', critical size of cluster nucleation, critical size of melting-freezing of cluster, critical size of quantum (laser) radiation, critical sizes for the single electron conductivity, critical energy and magnetic field for the magnetic tunneling, critical cluster sizes for the giant magnetic resistance, critical size of the first order magnetic phase transition. The critical characteristics are estimated by thermodynamic approaches, by Moessbauer spectroscopy, AFM, heat capacity, SQUID magnetometry and other technique, The influence of cluster-cluster interactions, cluster-matrix interactions and cluster defects on cluster atomic dynamics, cluster melting, cluster critical sizes, Curie or Neel points and the character of magnetic phase transitions were investigated. The applications of critical size and critical characteristic parameters for the nanomaterial characterization are considered

  18. Nuclear size regulation: from single cells to development and disease.

    Science.gov (United States)

    Edens, Lisa J; White, Karen H; Jevtic, Predrag; Li, Xiaoyang; Levy, Daniel L

    2013-04-01

    Cell size varies greatly among different cell types and organisms, especially during early development when cell division is rapid with little overall growth. A fundamental question is how organelle size is regulated relative to cell size. The nucleus exhibits exquisite size scaling during development and between species, and nuclear size is often altered in cancer cells. Recent studies have elucidated mechanisms of nuclear size regulation in a variety of experimental systems, opening the door to future research on how nuclear size impacts upon cell and nuclear function and subnuclear organization. In this review we discuss studies that have clarified nuclear size control mechanisms and how these results have or will contribute to our understanding of the functional significance of nuclear size. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Simulation of finite size effects of the fiber bundle model

    Science.gov (United States)

    Hao, Da-Peng; Tang, Gang; Xun, Zhi-Peng; Xia, Hui; Han, Kui

    2018-01-01

    In theory, the macroscopic fracture of materials should correspond with the thermodynamic limit of the fiber bundle model. However, the simulation of a fiber bundle model with an infinite size is unrealistic. To study the finite size effects of the fiber bundle model, fiber bundle models of various size are simulated in detail. The effects of system size on the constitutive behavior, critical stress, maximum avalanche size, avalanche size distribution, and increased step number of external load are explored. The simulation results imply that there is no feature size or cut size for macroscopic mechanical and statistical properties of the model. The constitutive curves near the macroscopic failure for various system size can collapse well with a simple scaling relationship. Simultaneously, the introduction of a simple extrapolation method facilitates the acquisition of more accurate simulation results in a large-limit system, which is better for comparison with theoretical results.

  20. Size dependent phase and morphological transformation of alumina nanoparticles

    Science.gov (United States)

    Dommisa, D. B.; Dash, R. K.

    2018-03-01

    The size effect of the alumina nanoparticles on the phase and morphological transition by thermal treatment at various temperatures is investigated by choosing two different sizes alumina nanoparticles. Our experimental results revealed that phase and morphological transformation behavior is significantly different for smaller size alumina nanoparticles than that of larger size. The more stable alpha phase transformation occurs at a higher temperature for smaller size alumina nanoparticles in comparison to that of the larger size alumina nanoparticles. Moreover, the experimental facts also elucidated that the nucleation and growth process at the nanoscale for the phase transition is also size dependent. Our experimental result from the FESEM and TEM analysis also revealed that there is a direct correlation between phase and morphological transition of alumina nanoparticles size which is consistent with the XRD results. Therefore, we believe that our experimental findings can be extended to other complex nanomaterials for understanding the size-dependent phase and morphological transformation at the nanoscale.

  1. Mother-Offspring Relations: Prey Quality and Maternal Size Affect Egg Size of an Acariphagous Lady Beetle in Culture

    Directory of Open Access Journals (Sweden)

    Eric W. Riddick

    2012-01-01

    Full Text Available We investigated mother-offspring relations in a lady beetle Stethorus punctillum Weise that utilizes spider mites as prey. Our objectives were to determine if (1 prey quality affects egg size, (2 maternal size correlates with egg size, and (3 egg size affects hatching success. We fed predators spider mites Tetranychus urticae Koch from lima bean Phaseolus lunatus L. foliage in the laboratory. Mothers of unknown body size offered high rather than low quality spider mites since birth produced larger eggs. Mothers of known body size offered only high quality spider mites, produced eggs of variable size, but mean egg size correlated positively with hind femur length. Mothers laid their eggs singly, rather than in batches, and eggs were large relative to femur size. Egg size did not affect hatch success; mean hatch rate exceeded 95% regardless of egg size. In conclusion, the quality of prey consumed by S. punctillum mothers while in the larval stage can affect their size as adults and, consequently, the size of their eggs. The behavior of laying eggs singly, the positive relationship between maternal size and mean egg size, and the high rate of egg hatch suggest that S. punctillum mothers invest heavily in offspring.

  2. Approximate COSMIC Functional Size - Guideline for Approximate COSMIC Functional Size Measurement

    NARCIS (Netherlands)

    Vogelezang, Frank; Symons, Charles; Lesterhuis, Arlan; Meli, Roberto; Daneva, Maia; Demirors, O.

    2013-01-01

    The COSMIC method provides a standardized way of measuring the functional size of software from the functional domains commonly referred to as 'business application' or 'Management Information Systems' (MIS) and 'real-time' software, and hybrids of these. In practice it is often sufficient to

  3. Size matters: Installed maximal unit size predicts market life cycles of electricity generation technologies and systems

    International Nuclear Information System (INIS)

    Li, N.

    2008-01-01

    The electricity generation technologies and systems are complex and change in very dynamic fashions, with a multitude of energy sources and prime movers. Since an important concept in generator design is the 'economies of scale', we discover that the installed maximal unit size (capacity) of the generators is a key 'envelope-pushing' characteristic with logistical behaviors. The logistical wavelet analysis of the max unit sizes for different fuels and prime movers, and the cumulative capacities, reveals universal quantitative features in the aggregate evolution of the power industry. We extract the transition times of the max sizes (spanning 10-90% of the saturation limits) for different technologies and systems, and discover that the max size saturation in the 90-99% range precedes the saturation of cumulative capacities of the corresponding systems in the US. While these universal laws are still empirical, they give us a simple yet elegant framework to examine the evolution of the power industry and markets in predictive, not just descriptive, terms. Such laws give us a quantitative tool to spot trends and predict future development, invaluable in planning and resource allocation based on intrinsic technology and system market life cycles. (author)

  4. Size Does Matter: Implied Object Size is Mentally Simulated During Language Comprehension

    NARCIS (Netherlands)

    de Koning, Bjorn B.; Wassenburg, Stephanie I.; Bos, Lisanne T.; Van der Schoot, Menno

    2017-01-01

    Embodied theories of language comprehension propose that readers construct a mental simulation of described objects that contains perceptual characteristics of their real-world referents. The present study is the first to investigate directly whether implied object size is mentally simulated during

  5. sizing for ethnicity in multi-cultural societies: validation of the size ...

    African Journals Online (AJOL)

    user

    2012). This challenges manufacturers and retailers in South. Africa to provide black consumers with well- fitting clothes. Muthambi et al. (2015) proposed size ...... 2007. Comparison of body shape between USA and Korean women. International Journal of. Clothing Science and Technology 19(5):374–. 391. MAKHANYA ...

  6. Portion size me : Plate-size induced consumption norms and education futility

    NARCIS (Netherlands)

    Wansink, B.; van Ittersum, Koert

    2013-01-01

    Research on the self-serving of food has empirically ignored the role that visual consumption norms play in determining how much food we serve on different sized dinnerware. We contend that dinnerware provides a visual anchor of an appropriate fill-level, which in turn, serves as a consumption norm

  7. Residence time, native range size, and genome size predict naturalization among angiosperms introduced to Australia.

    Science.gov (United States)

    Schmidt, John P; Drake, John M; Stephens, Patrick

    2017-12-01

    Although critical to progress in understanding (i) if, and (ii) at what rate, introduced plants will naturalize and potentially become invasive, establishing causal links between traits and invasion success is complicated by data gaps, phylogenetic nonindependence of species, the inability to control for differences between species in residence time and propagule pressure, and covariance among traits. Here, we focus on statistical relationships between genomic factors, life history traits, native range size, and naturalization status of angiosperms introduced to Australia. In a series of analyses, we alternately investigate the role of phylogeny, incorporate introduction history, and use graphical models to explore the network of conditional probabilities linking traits and introduction history to naturalization status. Applying this ensemble of methods to the largest publicly available data set on plant introductions and their fates, we found that, overall, residence time and native range size best predicted probability of naturalization. Yet, importantly, probability of naturalization consistently increased as genome size decreased, even when the effects of shared ancestry and residence time in Australia were accounted for, and that this pattern was stronger in species without a history of cultivation, but present across annual-biennials, and herbaceous and woody perennials. Thus, despite introduction biases and indirect effects of traits via introduction history, across analyses, reduced genome size was nevertheless consistently associated with a tendency to naturalize.

  8. Body size correlates with fertilization success but not gonad size in grass goby territorial males.

    Directory of Open Access Journals (Sweden)

    Jose Martin Pujolar

    Full Text Available In fish species with alternative male mating tactics, sperm competition typically occurs when small males that are unsuccessful in direct contests steal fertilization opportunities from large dominant males. In the grass goby Zosterisessor ophiocephalus, large territorial males defend and court females from nest sites, while small sneaker males obtain matings by sneaking into nests. Parentage assignment of 688 eggs from 8 different nests sampled in the 2003-2004 breeding season revealed a high level of sperm competition. Fertilization success of territorial males was very high but in all nests sneakers also contributed to the progeny. In territorial males, fertilization success correlated positively with male body size. Gonadal investment was explored in a sample of 126 grass gobies collected during the period 1995-1996 in the same area (61 territorial males and 65 sneakers. Correlation between body weight and testis weight was positive and significant for sneaker males, while correlation was virtually equal to zero in territorial males. That body size in territorial males is correlated with fertilization success but not gonad size suggests that males allocate much more energy into growth and relatively little into sperm production once the needed size to become territorial is attained. The increased paternity of larger territorial males might be due to a more effective defense of the nest in comparison with smaller territorial males.

  9. Artificial fish schools : Collective effects of school size, body size, and body form

    NARCIS (Netherlands)

    Kunz, H.; Hemelrijk, C.K.

    2003-01-01

    Individual-based models of schooling in fish have demonstrated that, via processes of self-organization. artificial fish may school in the absence of a leader or external stimuli, using local information only. We study for the first time how body size and body form of artificial fish affect school

  10. The grain size(s of Black Hills Quartzite deformed in the dislocation creep regime

    Directory of Open Access Journals (Sweden)

    R. Heilbronner

    2017-10-01

    Full Text Available General shear experiments on Black Hills Quartzite (BHQ deformed in the dislocation creep regimes 1 to 3 have been previously analyzed using the CIP method (Heilbronner and Tullis, 2002, 2006. They are reexamined using the higher spatial and orientational resolution of EBSD. Criteria for coherent segmentations based on c-axis orientation and on full crystallographic orientations are determined. Texture domains of preferred c-axis orientation (Y and B domains are extracted and analyzed separately. Subdomains are recognized, and their shape and size are related to the kinematic framework and the original grains in the BHQ. Grain size analysis is carried out for all samples, high- and low-strain samples, and separately for a number of texture domains. When comparing the results to the recrystallized quartz piezometer of Stipp and Tullis (2003, it is found that grain sizes are consistently larger for a given flow stress. It is therefore suggested that the recrystallized grain size also depends on texture, grain-scale deformation intensity, and the kinematic framework (of axial vs. general shear experiments.

  11. The grain size(s) of Black Hills Quartzite deformed in the dislocation creep regime

    Science.gov (United States)

    Heilbronner, Renée; Kilian, Rüdiger

    2017-10-01

    General shear experiments on Black Hills Quartzite (BHQ) deformed in the dislocation creep regimes 1 to 3 have been previously analyzed using the CIP method (Heilbronner and Tullis, 2002, 2006). They are reexamined using the higher spatial and orientational resolution of EBSD. Criteria for coherent segmentations based on c-axis orientation and on full crystallographic orientations are determined. Texture domains of preferred c-axis orientation (Y and B domains) are extracted and analyzed separately. Subdomains are recognized, and their shape and size are related to the kinematic framework and the original grains in the BHQ. Grain size analysis is carried out for all samples, high- and low-strain samples, and separately for a number of texture domains. When comparing the results to the recrystallized quartz piezometer of Stipp and Tullis (2003), it is found that grain sizes are consistently larger for a given flow stress. It is therefore suggested that the recrystallized grain size also depends on texture, grain-scale deformation intensity, and the kinematic framework (of axial vs. general shear experiments).

  12. The effects of meal size, body size and temperature on gastric evacuation in pikeperch

    DEFF Research Database (Denmark)

    Koed, Anders

    2001-01-01

    Prey size had no effect on the gastric evacuation rate of pikeperch Stizostedion lucioperca. The gastric evacuation was adequately described applying an exponent of 0.5 in the power model. Applying length instead of weight of pikeperch in the gastric evacuation model resulted in a change of estim...

  13. How size matters: exploring the association between quality of mental health services and catchment area size.

    Science.gov (United States)

    Ala-Nikkola, Taina; Sadeniemi, Minna; Kaila, Minna; Saarni, Samuli; Kontio, Raija; Pirkola, Sami; Joffe, Grigori; Oranta, Olli; Wahlbeck, Kristian

    2016-08-12

    The diversity of mental health and substance abuse services (MHS) available to service users is seen as an indicator of the quality of the service system. In most countries MHS are provided by a mix of public, private and third sector providers. In Finland, officially, the municipalities are responsible for organizing the services needed, but the real extent and roles of private and third sector service providers are not known. Our previous study showed that the catchment area population size was strongly associated with diversity of mental health services. It is not known whether this was due to some types of services or some provider types being more sensitive to the size effect than others. The aim of this study was to investigate the association between area population size and diversity of mental health services, i.e. which types of services and which service providers' contributions are sensitive to population size. To map and classify services, we used the ESMS-R. The diversity of services was defined as the count of main types of care. Providers were classified as public, private or third sectors. The diversity of outpatient, residential and voluntary services correlated positively with catchment area population size. The strongest positive correlation between the size of population and services available was found in third sector activities followed by public providers, but no correlation was found for diversity of private services. The third sector and public corporations each provided 44 % of the service units. Third sector providers produced all self-help services and most of the day care services. Third sector and private companies provided a significant part (59 %) of the residential care service units. Significant positive correlations were found between size of catchment area population and diversity of residential, outpatient and voluntary services, indicating that these services concentrate on areas with larger population bases. The third sector

  14. Size-dependent cytotoxicity and inflammatory responses of PEGylated silica-iron oxide nanocomposite size series

    Energy Technology Data Exchange (ETDEWEB)

    Injumpa, Wishulada [Department of Chemistry, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Ritprajak, Patcharee [Department of Microbiology, and RU in Oral Microbiology and Immunology, Faculty of Dentistry, Chulalongkorn University, Bangkok 10330 (Thailand); Insin, Numpon, E-mail: Numpon.I@chula.ac.th [Department of Chemistry, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand)

    2017-04-01

    Iron oxides nanoparticles have been utilized in biological systems and biomedical applications for many years because they are relatively safe and stable comparing to other magnetic nanomaterials. In some applications, iron oxide nanoparticles were modified with silica in order to be more stable in biological systems and able to be functionalized with various functional groups. Moreover, poly(ethylene glycol) (PEG) was one on the most used polymer to graft onto the nanoparticles in order to increase their biocompatibility, dispersibility and stability in aqueous solutions. Therefore, the nanocomposites comprising iron oxide nanoparticles, silica, and PEG could become multifunctional carriers combining superparamagnetic character, multi-functionality and high stability in biological environments. Herein, we reported the preparation of the nanocomposites and effects of their sizes on cytotoxicity and inflammatory responses. The PEGylated silica-iron oxide nanocomposites were prepared by coating of poly(poly(ethylene glycol) monomethyl ether methacrylate) (PPEGMA) on magnetic nanoparticle-silica nanocomposites via Atom Transfer Radical Polymerization (ATRP). The iron oxide nanoparticles were synthesized using a thermal decomposition method. The silica shells were then coated on iron oxides nanoparticles using reverse microemulsion and sol-gel methods. The size series of the nanocomposites with the diameter of 24.86±4.38, 45.24±5.00, 98.10±8.88 and 202.22±6.70 nm as measured using TEM were obtained. Thermogravimetric analysis (TGA) was used for the determination of % weight of PPEGMA on the nanocomposites showing the weight loss of ranging from 65% for smallest particles to 30% for largest particles. The various sizes (20, 40, 100, 200 nm) and concentrations (10, 100, 1000 μg/mL) of the nanocomposites were tested for their cytotoxicity in fibroblast and macrophage cell lines using MTT assay. The different sizes did not affect cell viability of fibroblast, albeit

  15. Evolution of body size in Galapagos marine iguanas.

    Science.gov (United States)

    Wikelski, Martin

    2005-10-07

    Body size is one of the most important traits of organisms and allows predictions of an individual's morphology, physiology, behaviour and life history. However, explaining the evolution of complex traits such as body size is difficult because a plethora of other traits influence body size. Here I review what we know about the evolution of body size in a group of island reptiles and try to generalize about the mechanisms that shape body size. Galapagos marine iguanas occupy all 13 larger islands in this Pacific archipelago and have maximum island body weights between 900 and 12 000g. The distribution of body sizes does not match mitochondrial clades, indicating that body size evolves independently of genetic relatedness. Marine iguanas lack intra- and inter-specific food competition and predators are not size-specific, discounting these factors as selective agents influencing body size. Instead I hypothesize that body size reflects the trade-offs between sexual and natural selection. We found that sexual selection continuously favours larger body sizes. Large males establish display territories and some gain over-proportional reproductive success in the iguanas' mating aggregations. Females select males based on size and activity and are thus responsible for the observed mating skew. However, large individuals are strongly selected against during El Niño-related famines when dietary algae disappear from the intertidal foraging areas. We showed that differences in algae sward ('pasture') heights and thermal constraints on large size are causally responsible for differences in maximum body size among populations. I hypothesize that body size in many animal species reflects a trade-off between foraging constraints and sexual selection and suggest that future research could focus on physiological and genetic mechanisms determining body size in wild animals. Furthermore, evolutionary stable body size distributions within populations should be analysed to better

  16. Sexual selection on brain size in shorebirds (Charadriiformes).

    Science.gov (United States)

    García-Peña, G E; Sol, D; Iwaniuk, A N; Székely, T

    2013-04-01

    Natural selection is considered a major force shaping brain size evolution in vertebrates, whereas the influence of sexual selection remains controversial. On one hand, sexual selection could promote brain enlargement by enhancing cognitive skills needed to compete for mates. On the other hand, sexual selection could favour brain size reduction due to trade-offs between investing in brain tissue and in sexually selected traits. These opposed predictions are mirrored in contradictory relationships between sexual selection proxies and brain size relative to body size. Here, we report a phylogenetic comparative analysis that highlights potential flaws in interpreting relative brain size-mating system associations as effects of sexual selection on brain size in shorebirds (Charadriiformes), a taxonomic group with an outstanding diversity in breeding systems. Considering many ecological effects, relative brain size was not significantly correlated with testis size. In polyandrous species, however, relative brain sizes of males and females were smaller than in monogamous species, and females had smaller brain size than males. Although these findings are consistent with sexual selection reducing brain size, they could also be due to females deserting parental care, which is a common feature of polyandrous species. Furthermore, our analyses suggested that body size evolved faster than brain size, and thus the evolution of body size may be confounding the effect of the mating system on relative brain size. The brain size-mating system association in shorebirds is thus not only due to sexual selection on brain size but rather, to body size evolution and other multiple simultaneous effects. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

  17. Column generation approaches to ship scheduling with flexible cargo sizes

    DEFF Research Database (Denmark)

    Brønmo, Geir; Nygreen, Bjørn; Lysgaard, Jens

    2010-01-01

    We present a Dantzig-Wolfe procedure for the ship scheduling problem with flexible cargo sizes. This problem is similar to the well-known pickup and delivery problem with time windows, but the cargo sizes are defined by intervals instead of by fixed values. The flexible cargo sizes have consequen......We present a Dantzig-Wolfe procedure for the ship scheduling problem with flexible cargo sizes. This problem is similar to the well-known pickup and delivery problem with time windows, but the cargo sizes are defined by intervals instead of by fixed values. The flexible cargo sizes have...

  18. Estimate of the particle size in nanoparticles of magnetite

    Energy Technology Data Exchange (ETDEWEB)

    Paresque, M.C.; Castro, J.A.; Campos, M.F.; Oliveira, E.M.; Liuzzi, M.A.S.C. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

    2016-07-01

    Full Text: Nanocrystalline particles of Fe3O4 were produced by co-precipitation in aquous mean. The particle size of magnetite is a very important parameter, because for particle size around 30 nm there is a transition superparamagnetic for ferromagnetic. This transition profoundly affects the properties of the nanofluid. The Langevin model allows an estimate of the particle size, directly from measured hysteresis curves. In this study, the particle size was also determined by x-ray diffraction with Rietveld analysis and by a Laser Particle Size Analyzer equipment. These two methods pointed out particle size around 20 nm. (author)

  19. Jurisdiction size and local public health spending.

    Science.gov (United States)

    Santerre, Rexford E

    2009-12-01

    To examine if a minimum efficient scale (MES) holds with respect to the population serviced by a local health department (LHD) given the congestability, externality, and scale/scope economy effects potentially associated with public health services. A nationally representative sample of LHDs in 2005. Multiple regression analysis is used to isolate the relation between population and spending while controlling for other factors known to influence local public health costs. Data were obtained from the 2005 National Profile of Local Public Health Agencies, a project supported through a cooperative agreement between the National Association of County and City Health Officials and the Centers for Disease Control and Prevention. The MES of a local public health department is approximately 100,000 people. After that size, additional population has little impact on public health spending per capita. Seventy-seven percent of LHDs in the sample fall below the 100,000 MES. Higher levels of government may want to provide financial inducements so that smaller LHDs consolidate or enter into agreements with larger public health organizations to provide services.

  20. Small Sized Drone Fall Recover Mechanism Design

    Science.gov (United States)

    LIU, Tzu-Heng; CHAO, Fang-Lin; LIOU, Jhen-Yuan

    2017-12-01

    Drones uses four motors to rotate clockwise, counter-clockwise, or change in rotational speed to change its status of motion. The problem of Unmanned Aerial Vehicle turnover causes personal loses and harm local environment. Designs of devices that can let falling drones recover are discussed. The models attempt to change the orientation, so that the drone may be able to improve to the point where it can take off again. The design flow included looking for functional elements, using simplify model to estimate primary functional characteristics, and find the appropriate design parameters. For reducing the complexity, we adopted the simple rotate mechanism with rotating arms to change the fuselage angle and reduce the dependence on the extra-components. A rough model was built to verify structure, and then the concept drawing and prototype were constructed. We made the prototype through the integration of mechanical part and the electronic control circuit. The electronic control module that selected is Arduino-mini pro. Through the Bluetooth modules, user can start the rebound mechanism by the motor control signal. Protections frames are added around each propeller to improve the body rotate problem. Limited by current size of Arduino module, motor and rebound mechanism make the main chassis more massive than the commercial product. However, built-in sensor and circuit miniaturization will improve it in future.