WorldWideScience

Sample records for size determines physical

  1. Physical Model for Rapid and Accurate Determination of Nanopore Size via Conductance Measurement.

    Wen, Chenyu; Zhang, Zhen; Zhang, Shi-Li

    2017-10-27

    Nanopores have been explored for various biochemical and nanoparticle analyses, primarily via characterizing the ionic current through the pores. At present, however, size determination for solid-state nanopores is experimentally tedious and theoretically unaccountable. Here, we establish a physical model by introducing an effective transport length, L eff , that measures, for a symmetric nanopore, twice the distance from the center of the nanopore where the electric field is the highest to the point along the nanopore axis where the electric field falls to e -1 of this maximum. By [Formula: see text], a simple expression S 0 = f (G, σ, h, β) is derived to algebraically correlate minimum nanopore cross-section area S 0 to nanopore conductance G, electrolyte conductivity σ, and membrane thickness h with β to denote pore shape that is determined by the pore fabrication technique. The model agrees excellently with experimental results for nanopores in graphene, single-layer MoS 2 , and ultrathin SiN x films. The generality of the model is verified by applying it to micrometer-size pores.

  2. Particle size determination

    Burr, K.J.

    1979-01-01

    A specification is given for an apparatus to provide a completely automatic testing cycle to determine the proportion of particles of less than a predetermined size in one of a number of fluid suspensions. Monitoring of the particle concentration during part of the process can be carried out by an x-ray source and detector. (U.K.)

  3. Functional and physical molecular size of the chicken hepatic lectin determined by radiation inactivation and sedimentation equilibrium analysis

    Steer, C.J.; Osborne, J.C. Jr.; Kempner, E.S.

    1990-01-01

    Radiation inactivation and sedimentation equilibrium analysis were used to determine the functional and physical size of the chicken hepatic membrane receptor that binds N-acetylglucosamine-terminated glycoproteins. Purified plasma membranes from chicken liver were irradiated with high energy electrons and assayed for 125I-agalactoorosomucoid binding. Increasing the dose of ionizing radiation resulted in a monoexponential decay in binding activity due to a progressive loss of binding sites. The molecular mass of the chicken lectin, determined in situ by target analysis, was 69,000 +/- 9,000 Da. When the same irradiated membranes were solubilized in Brij 58 and assayed, the binding protein exhibited a target size of 62,000 +/- 4,000 Da; in Triton X-100, the functional size of the receptor was 85,000 +/- 10,000 Da. Sedimentation equilibrium measurements of the purified binding protein yielded a lower limit molecular weight of 79,000 +/- 7,000. However, the solubilized lectin was detected as a heterogeneous population of oligomers with molecular weights as high as 450,000. Addition of calcium or calcium plus N-acetylglucosamine decreased the higher molecular weight species, but the lower limit molecular weights remained invariant. Similar results were determined when the chicken lectin was solubilized in Brij 58, C12E9, or 3-[(3-cholamidopropyl)dimethylammonio]-1-propane-sulfonic acid (CHAPS). Results from the present study suggest that in the plasma membrane, the functional species of the chicken hepatic lectin exists as a trimer. However, in detergent solution, the purified receptor forms a heterogeneous population of irreversible oligomers that exhibit binding activity proportional to size

  4. Use of Sugarcane Bagasse with Different Particle Sizes to Determine the Relationship between Physical Properties and Enzymatic Hydrolysis

    Jingbo Li

    2016-04-01

    Full Text Available The supramolecular structures of a substrate, such as crystallinity, specific surface area, average pore size, and cellulase adsorption capacity, etc., affect the enzymatic hydrolysis of a lignocellulosic biomass. It is unclear which of these factors is most important for efficient hydrolysis. To eliminate the influence of the hemicellulose content and the lignin, sugarcane bagasse samples with the same cellulose, hemicellulose, and lignin content but with different particle sizes were used as substrates to investigate the relationship between physical properties and enzymatic conversion efficiency. When the content of hemicellulose and lignin was not significantly different, the decrease in the crystallinity index (CrI and the increase in the specific surface area (SSA, cellulase adsorption, average pore size, and the cellulase adsorption per SSA could give rise to higher enzymatic convertibility. The effects of the CrI and the average pore size were more pronounced than the effects of the SSA, the cellulase adsorption capacity, and the cellulase adsorption per SSA. According to the developed formula, the CrI was more influential than the average pore size under the specific conditions.

  5. Sample size determination and power

    Ryan, Thomas P, Jr

    2013-01-01

    THOMAS P. RYAN, PhD, teaches online advanced statistics courses for Northwestern University and The Institute for Statistics Education in sample size determination, design of experiments, engineering statistics, and regression analysis.

  6. Concepts in sample size determination

    Umadevi K Rao

    2012-01-01

    Full Text Available Investigators involved in clinical, epidemiological or translational research, have the drive to publish their results so that they can extrapolate their findings to the population. This begins with the preliminary step of deciding the topic to be studied, the subjects and the type of study design. In this context, the researcher must determine how many subjects would be required for the proposed study. Thus, the number of individuals to be included in the study, i.e., the sample size is an important consideration in the design of many clinical studies. The sample size determination should be based on the difference in the outcome between the two groups studied as in an analytical study, as well as on the accepted p value for statistical significance and the required statistical power to test a hypothesis. The accepted risk of type I error or alpha value, which by convention is set at the 0.05 level in biomedical research defines the cutoff point at which the p value obtained in the study is judged as significant or not. The power in clinical research is the likelihood of finding a statistically significant result when it exists and is typically set to >80%. This is necessary since the most rigorously executed studies may fail to answer the research question if the sample size is too small. Alternatively, a study with too large a sample size will be difficult and will result in waste of time and resources. Thus, the goal of sample size planning is to estimate an appropriate number of subjects for a given study design. This article describes the concepts in estimating the sample size.

  7. Determinants of bone mass and bone size in a large cohort of physically active young adult men

    Garrett P

    2006-02-01

    Full Text Available Abstract The determinants of bone mineral density (BMD at multiple sites were examined in a fit college population. Subjects were 755 males (mean age = 18.7 years entering the United States Military Academy. A questionnaire assessed exercise frequency and milk, caffeine, and alcohol consumption and tobacco use. Academy staff measured height, weight, and fitness. Calcaneal BMD was measured by peripheral dual-energy x-ray absorptiometry (pDXA. Peripheral-quantitative computed tomography (pQCT was used to measure tibial mineral content, circumference and cortical thickness. Spine and hip BMD were measured by DXA in a subset (n = 159. Mean BMD at all sites was approximately one standard deviation above young normal (p

  8. Determination of size distribution function

    Teshome, A.; Spartakove, A.

    1987-05-01

    The theory of a method is outlined which gives the size distribution function (SDF) of a polydispersed system of non-interacting colloidal and microscopic spherical particles, having sizes in the range 0-10 -5 cm., from a gedanken experimental scheme. It is assumed that the SDF is differentiable and the result is obtained for rotational frequency in the order of 10 3 (sec) -1 . The method may be used independently, but is particularly useful in conjunction with an alternate method described in a preceding paper. (author). 8 refs, 2 figs

  9. Experimental determination of size distributions: analyzing proper sample sizes

    Buffo, A; Alopaeus, V

    2016-01-01

    The measurement of various particle size distributions is a crucial aspect for many applications in the process industry. Size distribution is often related to the final product quality, as in crystallization or polymerization. In other cases it is related to the correct evaluation of heat and mass transfer, as well as reaction rates, depending on the interfacial area between the different phases or to the assessment of yield stresses of polycrystalline metals/alloys samples. The experimental determination of such distributions often involves laborious sampling procedures and the statistical significance of the outcome is rarely investigated. In this work, we propose a novel rigorous tool, based on inferential statistics, to determine the number of samples needed to obtain reliable measurements of size distribution, according to specific requirements defined a priori. Such methodology can be adopted regardless of the measurement technique used. (paper)

  10. Recommendations for plutonium colloid size determination

    Kosiewicz, S.T.

    1984-02-01

    This report presents recommendations for plutonium colloid size determination and summarizes a literature review, discussions with other researchers, and comments from equipment manufacturers. Four techniques suitable for plutonium colloid size characterization are filtration and ultrafiltration, gel permeation chromatography, diffusion methods, and high-pressure liquid chromatography (conditionally). Our findings include the following: (1) Filtration and ultrafiltration should be the first methods used for plutonium colloid size determination because they can provide the most rapid results with the least complicated experimental arrangement. (2) After expertise has been obtained with filtering, gel permeation chromatography should be incorporated into the colloid size determination program. (3) Diffusion methods can be used next. (4) High-pressure liquid chromatography will be suitable after appropriate columns are available. A plutonium colloid size characterization program with filtration/ultrafiltration and gel permeation chromatography has been initiated

  11. Technique for determining training staff size

    Frye, S.R.

    1985-01-01

    Determining an adequate training staff size is a vital function of a training manager. Today's training requirements and standards have dictated a more stringent work load than ever before. A trainer's role is more than just providing classroom lectures. In most organizations the instructor must develop programs, lesson plans, exercise guides, objectives, test questions, etc. The tasks of a training organization are never ending and the appropriate resources must be determined and allotted to do the total job. A simple method exists for determining an adequate staff. Although not perfect, this method will provide a realistic approach for determining the needed training staff size. This method considers three major factors: instructional man-hours; non-instructional man-hours; and instructor availability. By determining and adding instructional man-hours and non-instructional man-hours a total man-hour distribution can be obtained. By dividing this by instructor availability a staff size can be determined

  12. Ultrasonic determination of the size of defects

    Zetterwall, T.

    1989-01-01

    The paper presents results from a study of ultrasonic testing of materials. The main topic has been the determination of the size, length and deep, of cracks or defects in stainless steel plates. (K.A.E)

  13. Determination of Flaw Size from Thermographic Data

    Winfree, William P.; Howell, Patricia A.; Zalameda, Joseph N.

    2014-01-01

    Conventional methods for reducing the pulsed thermographic responses of delaminations tend to overestimate the size of the flaw. Since the heat diffuses in the plane parallel to the surface, the resulting temperature profile over the flaw is larger than the flaw. A variational method is presented for reducing the thermographic data to produce an estimated size for the flaw that is much closer to the true size of the flaw. The size is determined from the spatial thermal response of the exterior surface above the flaw and a constraint on the length of the contour surrounding the flaw. The technique is applied to experimental data acquired on a flat bottom hole composite specimen.

  14. Towards traceable size determination of extracellular vesicles

    Zoltán Varga

    2014-02-01

    Full Text Available Background: Extracellular vesicles (EVs have clinical importance due to their roles in a wide range of biological processes. The detection and characterization of EVs are challenging because of their small size, low refractive index, and heterogeneity. Methods: In this manuscript, the size distribution of an erythrocyte-derived EV sample is determined using state-of-the-art techniques such as nanoparticle tracking analysis, resistive pulse sensing, and electron microscopy, and novel techniques in the field, such as small-angle X-ray scattering (SAXS and size exclusion chromatography coupled with dynamic light scattering detection. Results: The mode values of the size distributions of the studied erythrocyte EVs reported by the different methods show only small deviations around 130 nm, but there are differences in the widths of the size distributions. Conclusion: SAXS is a promising technique with respect to traceability, as this technique was already applied for traceable size determination of solid nanoparticles in suspension. To reach the traceable measurement of EVs, monodisperse and highly concentrated samples are required.

  15. Assessing learning in small sized physics courses

    Emanuela Ene

    2018-01-01

    Full Text Available We describe the construction, validation, and testing of a concept inventory for an Introduction to Physics of Semiconductors course offered by the department of physics to undergraduate engineering students. By design, this inventory addresses both content knowledge and the ability to interpret content via different cognitive processes outlined in Bloom’s revised taxonomy. The primary challenge comes from the low number of test takers. We describe the Rasch modeling analysis for this concept inventory, and the results of the calibration on a small sample size, with the intention of providing a useful blueprint to other instructors. Our study involved 101 students from Oklahoma State University and fourteen faculty teaching or doing research in the field of semiconductors at seven universities. The items were written in four-option multiple-choice format. It was possible to calibrate a 30-item unidimensional scale precisely enough to characterize the student population enrolled each semester and, therefore, to allow the tailoring of the learning activities of each class. We show that this scale can be employed as an item bank from which instructors could extract short testlets and where we can add new items fitting the existing calibration.

  16. Assessing learning in small sized physics courses

    Ene, Emanuela; Ackerson, Bruce J.

    2018-01-01

    We describe the construction, validation, and testing of a concept inventory for an Introduction to Physics of Semiconductors course offered by the department of physics to undergraduate engineering students. By design, this inventory addresses both content knowledge and the ability to interpret content via different cognitive processes outlined in Bloom's revised taxonomy. The primary challenge comes from the low number of test takers. We describe the Rasch modeling analysis for this concept inventory, and the results of the calibration on a small sample size, with the intention of providing a useful blueprint to other instructors. Our study involved 101 students from Oklahoma State University and fourteen faculty teaching or doing research in the field of semiconductors at seven universities. The items were written in four-option multiple-choice format. It was possible to calibrate a 30-item unidimensional scale precisely enough to characterize the student population enrolled each semester and, therefore, to allow the tailoring of the learning activities of each class. We show that this scale can be employed as an item bank from which instructors could extract short testlets and where we can add new items fitting the existing calibration.

  17. Asymptotic size determines species abundance in the marine size spectrum

    Andersen, Ken Haste; Beyer, Jan

    2006-01-01

    The majority of higher organisms in the marine environment display indeterminate growth; that is, they continue to grow throughout their life, limited by an asymptotic size. We derive the abundance of species as a function of their asymptotic size. The derivation is based on size-spectrum theory......, where population structure is derived from physiology and simple arguments regarding the predator-prey interaction. Using a hypothesis of constant satiation, which states that the average degree of satiation is independent of the size of an organism, the number of individuals with a given size is found...... to be proportional to the weight raised to the power -2.05, independent of the predator/prey size ratio. This is the first time the spectrum exponent has been derived solely on the basis of processes at the individual level. The theory furthermore predicts that the parameters in the von Bertalanffy growth function...

  18. System for determining sizes of biological macromolecules

    Nelson, R.M.; Danby, P.C.

    1987-01-01

    An electrophoresis system for determining the sizes of radiolabelled biological macromolecules is described. It comprises a cell containing an electrophoresis gel and having at least one lane, a voltage source connected across the gel for effecting the movement of macromolecules in the lane, a detector fixed relative to the moving molecules for generating electrical pulses responsive to signals emitted by the radiolabelled molecules; a pulse processor for counting the pulse rate, and a computational device for comparing the pulse rate to a predetermined value. (author)

  19. Size determinations of colloidal fat emulsions

    Kuntsche, Judith; Klaus, Katrin; Steiniger, Frank

    2009-01-01

    Size and size distributions of colloidal dispersions are of crucial importance for their performance and safety. In the present study, commercially available fat emulsions (Lipofundin N, Lipofundin MCT and Lipidem) were analyzed by photon correlation spectroscopy, laser diffraction with adequate...... was checked with mixtures of monodisperse polystyrene nanospheres. In addition, the ultrastructure of Lipofundin N and Lipofundin MCT was investigated by cryo-electron microscopy. All different particle sizing methods gave different mean sizes and size distributions but overall, results were in reasonable...... agreement. By all methods, a larger mean droplet size (between 350 and 400 nm) as well as a broader distribution was measured for Lipofundin N compared to Lipofundin MCT and Lipidem (mean droplet size between about 280 and 320 nm). Size distributions of Lipofundin MCT and Lipidem were very similar...

  20. Determination of cluster size of Pratylenchus Penetrans ...

    A nursery field 21 m x 80 m was sampled sequentially for Pratylenchus penetrans by decreasing the plot sizes systematically. Plots sizes of 3.6 m x 8 m, 3.6 m x 3.6 m and 0.6 m x 0.6 m were sampled. Nematode counts were computed to obtain the respective sample mean and variance. The sample mean and variance ...

  1. Determination of size distribution using neural networks

    Stevens, JH; Nijhuis, JAG; Spaanenburg, L; Mohammadian, M

    1999-01-01

    In this paper we present a novel approach to the estimation of size distributions of grains in water from images. External conditions such as the concentrations of grains in water cannot be controlled. This poses problems for local image analysis which tries to identify and measure single grains.

  2. Determination of particle size distributions from acoustic wave propagation measurements

    Spelt, P.D.; Norato, M.A.; Sangani, A.S.; Tavlarides, L.L.

    1999-01-01

    The wave equations for the interior and exterior of the particles are ensemble averaged and combined with an analysis by Allegra and Hawley [J. Acoust. Soc. Am. 51, 1545 (1972)] for the interaction of a single particle with the incident wave to determine the phase speed and attenuation of sound waves propagating through dilute slurries. The theory is shown to compare very well with the measured attenuation. The inverse problem, i.e., the problem of determining the particle size distribution given the attenuation as a function of frequency, is examined using regularization techniques that have been successful for bubbly liquids. It is shown that, unlike the bubbly liquids, the success of solving the inverse problem is limited since it depends strongly on the nature of particles and the frequency range used in inverse calculations. copyright 1999 American Institute of Physics

  3. Quantitative determination of grain sizes by means of scattered ultrasound

    Goebbels, K.; Hoeller, P.

    1976-01-01

    The scattering of ultrasounds makes possible the quantitative determination of grain sizes in metallic materials. Examples of measurements on steels with grain sizes between ASTM 1 and ASTM 12 are given

  4. Accuracy of computed tomography in determining pancreatic cancer tumor size

    Aoki, Kazunori; Okada, Shuichi; Moriyama, Noriyuki

    1994-01-01

    We compared tumor sizes determined by computed tomography (CT) with those of the resected specimens in 26 patients with pancreatic cancer in order to clarify whether or not the size of a pancreatic tumor can be accurately determined by CT. From the precontrast, postcontrast and arterial dominant phases of dynamic CT, the arterial dominant phase was found to yield the highest correlation between CT measured tumor size and that of the resected specimens (p<0.01). The correlation coefficient was, however, not high (r=0.67). CT alone may therefore be insufficient to determine tumor size in pancreatic cancer accurately. (author)

  5. Determination of a novel size proxy in comparative morphometrics

    Andrew Gallagher

    2015-09-01

    Full Text Available Absolute size is a critical determinant of organismal biology, yet there exists no real consensus as to what particular metric of ‘size’ is empirically valid in assessments of extinct mammalian taxa. The methodological approach of JE Mosimann has found extensive favour in ‘size correction’ in comparative morphometrics, but not ‘size prediction’ in palaeontology and palaeobiology. Analyses of five distinct mammalian data sets confirm that a novel size variate (GMSize derived from k=8 dimensions of the postcranial skeleton effectively satisfies all expectations of the Jolicoeur–Mosimann theorem of univariate and multivariate size. On the basis of strong parametric correlations between the k=8 variates and between scores derived from the first principal component and geometric mean size (GMSize in all series, this novel size variable has considerable utility in comparative vertebrate morphometrics and palaeobiology as an appropriate descriptor of individual size in extant and extinct taxa.

  6. Size determinations of plutonium colloids using autocorrelation photon spectroscopy

    Triay, I.R.; Rundberg, R.S.; Mitchell, A.J.; Ott, M.A.; Hobart, D.E.; Palmer, P.D.; Newton, T.W.; Thompson, J.L.

    1989-01-01

    Autocorrelation Photon Spectroscopy (APS) is a light-scattering technique utilized to determine the size distribution of colloidal suspensions. The capabilities of the APS methodology have been assessed by analyzing colloids of known sizes. Plutonium(IV) colloid samples were prepared by a variety of methods including: dilution; peptization; and alpha-induced auto-oxidation of Pu(III). The size of theses Pu colloids was analyzed using APS. The sizes determined for the Pu colloids studied varied from 1 to 370 nanometers. 7 refs., 5 figs., 3 tabs

  7. Sample size determination in clinical trials with multiple endpoints

    Sozu, Takashi; Hamasaki, Toshimitsu; Evans, Scott R

    2015-01-01

    This book integrates recent methodological developments for calculating the sample size and power in trials with more than one endpoint considered as multiple primary or co-primary, offering an important reference work for statisticians working in this area. The determination of sample size and the evaluation of power are fundamental and critical elements in the design of clinical trials. If the sample size is too small, important effects may go unnoticed; if the sample size is too large, it represents a waste of resources and unethically puts more participants at risk than necessary. Recently many clinical trials have been designed with more than one endpoint considered as multiple primary or co-primary, creating a need for new approaches to the design and analysis of these clinical trials. The book focuses on the evaluation of power and sample size determination when comparing the effects of two interventions in superiority clinical trials with multiple endpoints. Methods for sample size calculation in clin...

  8. determination of some physical properties of three groundnut varieties

    Dr Obe

    groundnuts. Three varieties of groundnuts namely ICGV-SM-93523, RMP-9 and RMP- 12 were collected and some of the physical properties, such as weight, angle of repose, coefficient of friction, bulk density, size, shape and moisture content were determined. The angle of repose for the three varieties was found to range ...

  9. Finite size effects for giant magnons on physical strings

    Minahan, J.A.; Ohlsson Sax, O.

    2008-01-01

    Using finite gap methods, we find the leading order finite size corrections for an arbitrary number of giant magnons on physical strings, where the sum of the momenta is a multiple of 2π. Our results are valid for the Hofman-Maldacena fundamental giant magnons as well as their dyonic generalizations. The energy corrections turn out to be surprisingly simple, especially if all the magnons are fundamental, and at leading order are independent of the magnon flavors. We also show how to use the Bethe ansatz to find finite size corrections for dyonic giant magnons with large R-charges

  10. Neuromuscular dose-response studies: determining sample size.

    Kopman, A F; Lien, C A; Naguib, M

    2011-02-01

    Investigators planning dose-response studies of neuromuscular blockers have rarely used a priori power analysis to determine the minimal sample size their protocols require. Institutional Review Boards and peer-reviewed journals now generally ask for this information. This study outlines a proposed method for meeting these requirements. The slopes of the dose-response relationships of eight neuromuscular blocking agents were determined using regression analysis. These values were substituted for γ in the Hill equation. When this is done, the coefficient of variation (COV) around the mean value of the ED₅₀ for each drug is easily calculated. Using these values, we performed an a priori one-sample two-tailed t-test of the means to determine the required sample size when the allowable error in the ED₅₀ was varied from ±10-20%. The COV averaged 22% (range 15-27%). We used a COV value of 25% in determining the sample size. If the allowable error in finding the mean ED₅₀ is ±15%, a sample size of 24 is needed to achieve a power of 80%. Increasing 'accuracy' beyond this point requires increasing greater sample sizes (e.g. an 'n' of 37 for a ±12% error). On the basis of the results of this retrospective analysis, a total sample size of not less than 24 subjects should be adequate for determining a neuromuscular blocking drug's clinical potency with a reasonable degree of assurance.

  11. Sample size determination for mediation analysis of longitudinal data.

    Pan, Haitao; Liu, Suyu; Miao, Danmin; Yuan, Ying

    2018-03-27

    Sample size planning for longitudinal data is crucial when designing mediation studies because sufficient statistical power is not only required in grant applications and peer-reviewed publications, but is essential to reliable research results. However, sample size determination is not straightforward for mediation analysis of longitudinal design. To facilitate planning the sample size for longitudinal mediation studies with a multilevel mediation model, this article provides the sample size required to achieve 80% power by simulations under various sizes of the mediation effect, within-subject correlations and numbers of repeated measures. The sample size calculation is based on three commonly used mediation tests: Sobel's method, distribution of product method and the bootstrap method. Among the three methods of testing the mediation effects, Sobel's method required the largest sample size to achieve 80% power. Bootstrapping and the distribution of the product method performed similarly and were more powerful than Sobel's method, as reflected by the relatively smaller sample sizes. For all three methods, the sample size required to achieve 80% power depended on the value of the ICC (i.e., within-subject correlation). A larger value of ICC typically required a larger sample size to achieve 80% power. Simulation results also illustrated the advantage of the longitudinal study design. The sample size tables for most encountered scenarios in practice have also been published for convenient use. Extensive simulations study showed that the distribution of the product method and bootstrapping method have superior performance to the Sobel's method, but the product method was recommended to use in practice in terms of less computation time load compared to the bootstrapping method. A R package has been developed for the product method of sample size determination in mediation longitudinal study design.

  12. On the internal representation of numerical magnitude and physical size.

    Fitousi, Daniel

    2014-01-01

    A nascent idea in the numerical cognition literature--the analogical hypothesis (Pinel, Piazza, Bihan, & Dehaene, 2004)--assumes a common noisy code for the representation of symbolic (e.g., numerals) and nonsymbolic (e.g., numerosity, physical size, luminance) magnitudes. The present work subjected this assumption to various tests from the perspective of General Recognition Theory (GRT; Ashby &Townsend, 1986)--a multidimensional extension of Signal Detection Theory (Green & Swets, 1966). The GRT was applied to the dimensions of numerical magnitude and physical size with the following goals: (a) characterizing the internal representation of these dimensions in the psychological space, and (b) assessing various types of (in)dependence and separability governing the perception of these dimensions. The results revealed various violations of independence and separability with Stroop incongruent, but not with Stroop congruent stimuli. The outcome suggests that there are deep differences in architecture between Stroop congruent and incongruent stimuli that reach well beyond the semantic relationship involved.

  13. Multi-Criteria Model for Determining Order Size

    Katarzyna Jakowska-Suwalska

    2013-01-01

    Full Text Available A multi-criteria model for determining the order size for materials used in production has been presented. It was assumed that the consumption rate of each material is a random variable with a known probability distribution. Using such a model, in which the purchase cost of materials ordered is limited, three criteria were considered: order size, probability of a lack of materials in the production process, and deviations in the order size from the consumption rate in past periods. Based on an example, it has been shown how to use the model to determine the order sizes for polyurethane adhesive and wood in a hard-coal mine. (original abstract

  14. Determination of grain size by XRD profile analysis and TEM counting in nano-structured Cu

    Zhong Yong; Ping Dehai; Song Xiaoyan; Yin Fuxing

    2009-01-01

    In this work, a serial of pure copper sample with different grain sizes from nano- to micro-scale were prepared by sparkle plasma sintering (SPS) and following anneal treatment at 873 K and 1073 K, respectively. The grain size distributions of these samples were determined by both X-ray diffraction (XRD) profile analysis and transmission electronic microscope (TEM) micrograph counting. Although these two methods give similar distributions of grain size in the case of as-SPS sample with nano-scale grain size (around 10 nm), there are apparent discrepancies between the grain size distributions of the annealed samples obtained from XRD and TEM, especially for the sample annealed at 1073 K after SPS with micro-scale grain size (around 2 μm), which TEM counting provides much higher values of grain sizes than XRD analysis does. It indicates that for large grain-sized material, XRD analysis lost its validity for determination of grain size. It might be due to some small sized substructures possibly existed in even annealed (large grain-sized) samples, whereas there is no substructures in as-SPS (nanocrystalline) sample. Moreover, it has been found that the effective outer cut-off radius R e derived from XRD analysis coincides with the grain sizes given by TEM counting. The potential relationship between grain size and R e was discussed in the present work. These results might provide some new hints for deeper understanding of the physical meaning of XRD analysis and the parameters derived.

  15. Lipoplex size determines lipofection efficiency with or without serum.

    Almofti, Mohamad Radwan; Harashima, Hideyoshi; Shinohara, Yasuo; Almofti, Ammar; Li, Wenhao; Kiwada, Hiroshi

    2003-01-01

    In order to identify factors affecting cationic liposome-mediated gene transfer, the relationships were examined among cationic liposome/DNA complex (lipoplex)-cell interactions, lipoplex size and lipoplex-mediated transfection (lipofection) efficiency. It was found that lipofection efficiency was determined mainly by lipoplex size, but not by the extent of lipoplex-cell interactions including binding, uptake or fusion. In addition, it was found that serum affected mainly lipoplex size, but not lipoplex-cell interactions, which effect was the major reason behind the inhibitory effect of serum on lipofection efficiency. It was concluded that, in the presence or absence of serum, lipoplex size is a major factor determining lipofection efficiency. Moreover, in the presence or absence of serum, lipoplex size was found to affect lipofection efficiency by controlling the size of the intracellular vesicles containing lipoplexes after internalization, but not by affecting lipoplex-cell interactions. In addition, large lipoplex particles showed, in general, higher lipofection efficiency than small particles. These results imply that, by controlling lipoplex size, an efficient lipid delivery system may be achieved for in vitro and in vivo gene therapy.

  16. IN MY OPINION: What about person-sized physics?

    Cornwall, Malcolm

    1999-03-01

    physics undergraduate - that it is fundamentally important in our everyday lives. It is `person-sized physics' (give or take a factor of 1010!) which lies behind the numerous items that make up our world today, among them PCs, mobile phones, video CDs, `intelligent' materials and the multifarious means for medical imaging. Can't we promote an interest in physics through popular books and articles on wonders such as these? Yes, such books do exist, but on the bookshop shelves you will find scant representation of this type of physics among the well-written and superbly presented `pop' books like those of Hawking, Gribbin and Davies. Until recently I was a Deputy Editor of this journal. During the past few years we have published numerous `special issues' focusing on a specific topic. Those I have edited have reflected my philosophy, and have included issues on Laser Applications, Energy Update, and the Physics of the Body. Other editors have produced equally `applied' special issues. Might youngsters (or even an oldster) be equally excited by the elucidation of the mysteries of the quantum world in the context of, say, the silicon chip as by the world of the fundamental particle? Surely the glamour of physics-based state-of-the-art recording technology or the latest PC or sleek new aircraft or medical imaging technique can compete with the `wonders of space and time' exhaustively recycled in the popular literature? Come on popular science authors! Try your hand at dressing up the physics of everyday life so that the excitement and immediate relevance of physics is displayed before the people - not least, the young people - in the street.

  17. Pre-service physics teachers' ideas on size, visibility and structure of the atom

    Uenlue, Pervin

    2010-01-01

    Understanding the atom gives the opportunity to both understand and conceptually unify the various domains of science, such as physics, chemistry, biology, astronomy and geology. Among these disciplines, physics teachers are expected to be particularly well educated in this topic. It is important that pre-service physics teachers know what sort of theories regarding the atom they will bring into their own classrooms. Six tasks were developed, comprising size, visibility and structure of the atom. These tasks carried out by pre-service physics teachers were examined by content analysis and six categories were determined. These are size, visibility, subatomic particles, atom models, electron orbit and electron features. Pre-service physics teachers' ideas about the atom were clarified under these categories.

  18. Pore size determination from charged particle energy loss measurement

    Brady, F.P.; Armitage, B.H.

    1977-01-01

    A new method aimed at measuring porosity and mean pore size in materials has been developed at Harwell. The energy width or variance of a transmitted or backscattered charged particle beam is measured and related to the mean pore size via the assumption that the variance in total path length in the porous material is given by (Δx 2 )=na 2 , where n is the mean number of pores and a the mean pore size. It is shown on the basis of a general and rigorous theory of total path length distribution that this approximation can give rise to large errors in the mean pore size determination particularly in the case of large porosities (epsilon>0.5). In practice it is found that it is not easy to utilize fully the general theory because accurate measurements of the first four moments are required to determine the means and variances of the pore and inter-pore length distributions. Several models for these distributions are proposed. When these are incorporated in the general theory the determinations of mean pore size from experimental measurements on powder samples are in good agreement with values determined by other methods. (Auth.)

  19. Yield stress determination of a physical gel

    Hvidt, Søren

    2013-01-01

    Pluronic F127 solutions form gels in water with high elastic moduli. Pluronic gels can, however, only withstand small deformations and stresses. Different steady shear and oscillatory methods traditionally used to determine yield stress values are compared. The results show that the yield stresses...... values of these gels depend on test type and measurement time, and no absolute yield stress value can be determined for these physical gels....

  20. Determining wood chip size: image analysis and clustering methods

    Paolo Febbi

    2013-09-01

    Full Text Available One of the standard methods for the determination of the size distribution of wood chips is the oscillating screen method (EN 15149- 1:2010. Recent literature demonstrated how image analysis could return highly accurate measure of the dimensions defined for each individual particle, and could promote a new method depending on the geometrical shape to determine the chip size in a more accurate way. A sample of wood chips (8 litres was sieved through horizontally oscillating sieves, using five different screen hole diameters (3.15, 8, 16, 45, 63 mm; the wood chips were sorted in decreasing size classes and the mass of all fractions was used to determine the size distribution of the particles. Since the chip shape and size influence the sieving results, Wang’s theory, which concerns the geometric forms, was considered. A cluster analysis on the shape descriptors (Fourier descriptors and size descriptors (area, perimeter, Feret diameters, eccentricity was applied to observe the chips distribution. The UPGMA algorithm was applied on Euclidean distance. The obtained dendrogram shows a group separation according with the original three sieving fractions. A comparison has been made between the traditional sieve and clustering results. This preliminary result shows how the image analysis-based method has a high potential for the characterization of wood chip size distribution and could be further investigated. Moreover, this method could be implemented in an online detection machine for chips size characterization. An improvement of the results is expected by using supervised multivariate methods that utilize known class memberships. The main objective of the future activities will be to shift the analysis from a 2-dimensional method to a 3- dimensional acquisition process.

  1. Physical characteristics as determinants of adolescents' moral ...

    This study was designed to investigate the physical characteristics as determinants of adolescent moral behaviour in Ekiti State secondary schools. Two research hypotheses were formulated. The research design used was the descriptive of the survey type. The population for this study was made up of all adolescents in ...

  2. Performance Determinants in Physical Sciences for ODL ...

    Identifying performance determinants in physical science subjects for students studying through open and distance learning modes in higher learning institutions requires wider range of intuition than it is for conventional institutions. Using data from The Open University of Tanzania, this paper has unearthed some of the ...

  3. Children and adults use physical size and numerical alliances in third-party judgments of dominance

    Stella F Lourenco

    2016-01-01

    Full Text Available Humans and other social animals interact regularly with conspecifics as part of affiliative groups. Many of these interactions are cooperative, but many others involve competition for resources. Competitive exchanges are often resolved on the basis of dominance relationships, with higher-ranking individuals receiving priority access to desired goods. Although no single cue can establish permanent dominance relationships, there are some cues that predict dominance fairly reliably across context. In the present study, we focused on two such cues relevant to competing groups: (i the physical sizes of individual members, and (ii their relative number. Using a social competition task, we examined whether, and how, preschool-aged children and adults used differences in physical size and numerical alliances to judge which of two groups should prevail in a competitive exchange for a desired object. These judgments were made when either physical size or number differed between groups (Experiment 1, and when both were available but pitted against each other (Experiments 1 and 2. Our findings revealed that by 3 years of age, humans use multiple perceptible cues in third-party judgments of dominance. Our findings also revealed that 3-year-olds, like adults, weighted these cues flexibly according to the additional factor of overall group size, with the physical sizes of individuals determining dominance in smaller groups (e.g., 2 vs. 4 characters and the relative number of individuals determining dominance in larger groups (e.g., 15 vs. 30 characters. Taken together, our findings suggest that a basic formula for determining dominance in competitive exchanges, which weights physical size of individuals and numerical alliances as a function of overall group size, is available to young children and appears fairly stable through to adulthood.

  4. Children and Adults Use Physical Size and Numerical Alliances in Third-Party Judgments of Dominance.

    Lourenco, Stella F; Bonny, Justin W; Schwartz, Bari L

    2015-01-01

    Humans and other social animals interact regularly with conspecifics as part of affiliative groups. Many of these interactions are cooperative, but many others involve competition for resources. Competitive exchanges are often resolved on the basis of dominance relationships, with higher-ranking individuals receiving priority access to desired goods. Although no single cue can establish permanent dominance relationships, there are some cues that predict dominance fairly reliably across context. In the present study, we focused on two such cues relevant to competing groups: (i) the physical sizes of individual members, and (ii) their relative number. Using a social competition task, we examined whether, and how, preschool-aged children and adults used differences in physical size and numerical alliances to judge which of two groups should prevail in a competitive exchange for a desired object. These judgments were made when either physical size or number differed between groups (Experiment 1), and when both were available but pitted against each other (Experiments 1 and 2). Our findings revealed that by 3 years of age, humans use multiple perceptible cues in third-party judgments of dominance. Our findings also revealed that 3-year-olds, like adults, weighted these cues flexibly according to the additional factor of overall group size, with the physical sizes of individuals determining dominance in smaller groups (e.g., 2 vs. 4 characters) and the relative number of individuals determining dominance in larger groups (e.g., 15 vs. 30 characters). Taken together, our findings suggest that a basic formula for determining dominance in competitive exchanges, which weights physical size of individuals and numerical alliances as a function of overall group size, is available to young children and appears fairly stable through to adulthood.

  5. Platelet size and age determine platelet function independently

    Thompson, C.B.; Jakubowski, J.A.; Quinn, P.G.; Deykin, D.; Valeri, C.R.

    1984-01-01

    A study was undertaken to examine the interaction of platelet size and age in determining in vitro platelet function. Baboon megakaryocytes were labeled in vivo by the injection of 75Se-methionine. Blood was collected when the label was predominantly associated with younger platelets (day 2) and with older platelets (day 9). Size-dependent platelet subpopulations were prepared on both days by counterflow centrifugation. The reactivity of each platelet subpopulation was determined on both days by measuring thrombin-induced aggregation. Platelets were fixed after partial aggregation had occurred by the addition of EDTA/formalin. After removal of the aggregated platelets by differential centrifugation, the supernatant medium was assayed for remaining platelets and 75Se radioactivity. Comparing day 2 and day 9, no significant difference was seen in the rate of aggregation of a given subpopulation. However, aggregation was more rapid in the larger platelet fractions than in the smaller ones on both days. A greater percentage of the 75Se radioactivity appeared in the platelet aggregates on day 2 than on day 9. This effect was independent of platelet size, as it occurred to a similar extent in the unfractionated platelets and in each of the size-dependent platelet subpopulations. The data indicate that young platelets are more active than older platelets. This study demonstrates that size and age are both determinants of platelet function, but by independent mechanisms

  6. Sizing and scaling requirements of a large-scale physical model for code validation

    Khaleel, R.; Legore, T.

    1990-01-01

    Model validation is an important consideration in application of a code for performance assessment and therefore in assessing the long-term behavior of the engineered and natural barriers of a geologic repository. Scaling considerations relevant to porous media flow are reviewed. An analysis approach is presented for determining the sizing requirements of a large-scale, hydrology physical model. The physical model will be used to validate performance assessment codes that evaluate the long-term behavior of the repository isolation system. Numerical simulation results for sizing requirements are presented for a porous medium model in which the media properties are spatially uncorrelated

  7. Determining sample size for assessing species composition in ...

    Species composition is measured in grasslands for a variety of reasons. Commonly, observations are made using the wheel-point apparatus, but the problem of determining optimum sample size has not yet been satisfactorily resolved. In this study the wheel-point apparatus was used to record 2 000 observations in each of ...

  8. A flexible method for multi-level sample size determination

    Lu, Ming-Shih; Sanborn, J.B.; Teichmann, T.

    1997-01-01

    This paper gives a flexible method to determine sample sizes for both systematic and random error models (this pertains to sampling problems in nuclear safeguard questions). In addition, the method allows different attribute rejection limits. The new method could assist achieving a higher detection probability and enhance inspection effectiveness

  9. Sample size determination for equivalence assessment with multiple endpoints.

    Sun, Anna; Dong, Xiaoyu; Tsong, Yi

    2014-01-01

    Equivalence assessment between a reference and test treatment is often conducted by two one-sided tests (TOST). The corresponding power function and sample size determination can be derived from a joint distribution of the sample mean and sample variance. When an equivalence trial is designed with multiple endpoints, it often involves several sets of two one-sided tests. A naive approach for sample size determination in this case would select the largest sample size required for each endpoint. However, such a method ignores the correlation among endpoints. With the objective to reject all endpoints and when the endpoints are uncorrelated, the power function is the production of all power functions for individual endpoints. With correlated endpoints, the sample size and power should be adjusted for such a correlation. In this article, we propose the exact power function for the equivalence test with multiple endpoints adjusted for correlation under both crossover and parallel designs. We further discuss the differences in sample size for the naive method without and with correlation adjusted methods and illustrate with an in vivo bioequivalence crossover study with area under the curve (AUC) and maximum concentration (Cmax) as the two endpoints.

  10. Volumetric determination of tumor size abdominal masses. Problems -feasabilities

    Helmberger, H.; Bautz, W.; Sendler, A.; Fink, U.; Gerhardt, P.

    1995-01-01

    The most important indication for clinically reliable volumetric determination of tumor size in the abdominal region is monitoring liver metastases during chemotherapy. Determination of volume can be effectively realized using 3D reconstruction. Therefore, the primary data set must be complete and contiguous. The mass should be depicted strongly enhanced and free of artifacts. At present, this prerequisite can only be complied with using thin-slice spiral CT. Phantom studies have proven that a semiautomatic reconstruction algorithm is recommendable. The basic difficulties involved in volumetric determination of tumor size are the problems in differentiating active malignant mass and changes in the surrounding tissue, as well as the lack of histomorphological correlation. Possible indications for volumetry of gastrointestinal masses in the assessment of neoadjuvant therapeutic concepts are under scientific evaluation. (orig./MG) [de

  11. Size determination of an equilibrium enzymic system by radiation inactivation

    Simon, P.; Swillens, S.; Dumont, J.E.

    1982-01-01

    Radiation inactivation of complex enzymic systems is currently used to determine the enzyme size and the molecular organization of the components in the system. An equilibrium model was simulated describing the regulation of enzyme activity by association of the enzyme with a regulatory unit. It is assumed that, after irradiation, the system equilibrates before the enzyme activity is assayed. The theoretical results show that the target-size analysis of these numerical data leads to a bad estimate of the enzyme size. Moreover, some implicit assumptions such as the transfer of radiation energy between non-covalently bound molecules should be verified before interpretation of target-size analysis. It is demonstrated that the apparent target size depends on the parameters of the system, namely the size and the concentration of the components, the equilibrium constant, the relative activities of free enzyme and enzymic complex, the existence of energy transfer, and the distribution of the components between free and bound forms during the irradiation. (author)

  12. Determinants of polyp Size in patients undergoing screening colonoscopy

    Maisonneuve Patrick

    2011-09-01

    Full Text Available Abstract Background Pre-existing polyps, especially large polyps, are known to be the major source for colorectal cancer, but there is limited available information about factors that are associated with polyp size and polyp growth. We aim to determine factors associated with polyp size in different age groups. Methods Colonoscopy data were prospectively collected from 67 adult gastrointestinal practice sites in the United States between 2002 and 2007 using a computer-generated endoscopic report form. Data were transmitted to and stored in a central data repository, where all asymptomatic white (n = 78352 and black (n = 4289 patients who had a polyp finding on screening colonoscopy were identified. Univariate and multivariate analysis of age, gender, performance site, race, polyp location, number of polyps, and family history as risk factors associated with the size of the largest polyp detected at colonoscopy. Results In both genders, size of the largest polyp increased progressively with age in all age groups (P P Conclusions In both genders there is a significant increase in polyp size detected during screening colonoscopy with increasing age. Important additional risk factors associated with increasing polyp size are gender, race, polyp location, and number of polyps, with polyp multiplicity being the strongest risk factor. Previous family history of bowel cancer was not a risk factor.

  13. Determination of the TLD-100 physical parameters

    Paucar J, J.; Picon C, C.

    1998-01-01

    This study was realized in the Physics service at the Radiotherapy Department of the National Institute of Neoplasic Diseases in Lima, Peru, it was determined the activation energy, the kinetic order and the frequency factor of the fifth peak of the TLD-100 thermoluminescent spectra using different algorithms. This was carried out in parallel with the implementation and design of a software and an interface associated with the Tl lecturer which allows a semiautomatic control for a thermoluminescent lecturer process. (Author)

  14. Conservative Sample Size Determination for Repeated Measures Analysis of Covariance.

    Morgan, Timothy M; Case, L Douglas

    2013-07-05

    In the design of a randomized clinical trial with one pre and multiple post randomized assessments of the outcome variable, one needs to account for the repeated measures in determining the appropriate sample size. Unfortunately, one seldom has a good estimate of the variance of the outcome measure, let alone the correlations among the measurements over time. We show how sample sizes can be calculated by making conservative assumptions regarding the correlations for a variety of covariance structures. The most conservative choice for the correlation depends on the covariance structure and the number of repeated measures. In the absence of good estimates of the correlations, the sample size is often based on a two-sample t-test, making the 'ultra' conservative and unrealistic assumption that there are zero correlations between the baseline and follow-up measures while at the same time assuming there are perfect correlations between the follow-up measures. Compared to the case of taking a single measurement, substantial savings in sample size can be realized by accounting for the repeated measures, even with very conservative assumptions regarding the parameters of the assumed correlation matrix. Assuming compound symmetry, the sample size from the two-sample t-test calculation can be reduced at least 44%, 56%, and 61% for repeated measures analysis of covariance by taking 2, 3, and 4 follow-up measures, respectively. The results offer a rational basis for determining a fairly conservative, yet efficient, sample size for clinical trials with repeated measures and a baseline value.

  15. Influence of cervical preflaring on apical file size determination.

    Pecora, J D; Capelli, A; Guerisoli, D M Z; Spanó, J C E; Estrela, C

    2005-07-01

    To investigate the influence of cervical preflaring with different instruments (Gates-Glidden drills, Quantec Flare series instruments and LA Axxess burs) on the first file that binds at working length (WL) in maxillary central incisors. Forty human maxillary central incisors with complete root formation were used. After standard access cavities, a size 06 K-file was inserted into each canal until the apical foramen was reached. The WL was set 1 mm short of the apical foramen. Group 1 received the initial apical instrument without previous preflaring of the cervical and middle thirds of the root canal. Group 2 had the cervical and middle portion of the root canals enlarged with Gates-Glidden drills sizes 90, 110 and 130. Group 3 had the cervical and middle thirds of the root canals enlarged with nickel-titanium Quantec Flare series instruments. Titanium-nitrite treated, stainless steel LA Axxess burs were used for preflaring the cervical and middle portions of root canals from group 4. Each canal was sized using manual K-files, starting with size 08 files with passive movements until the WL was reached. File sizes were increased until a binding sensation was felt at the WL, and the instrument size was recorded for each tooth. The apical region was then observed under a stereoscopic magnifier, images were recorded digitally and the differences between root canal and maximum file diameters were evaluated for each sample. Significant differences were found between experimental groups regarding anatomical diameter at the WL and the first file to bind in the canal (P Flare instruments were ranked in an intermediary position, with no statistically significant differences between them (0.093 mm average). The instrument binding technique for determining anatomical diameter at WL is not precise. Preflaring of the cervical and middle thirds of the root canal improved anatomical diameter determination; the instrument used for preflaring played a major role in determining the

  16. Determining the Relationship Between Physical Fitness, Gender, and Life Satisfaction

    Kyle Busing

    2016-11-01

    Full Text Available Previous research has suggested a positive effect of physical activity on life satisfaction. Little research exists that has investigated the relationship between physical fitness and life satisfaction. For this purpose, this research was done to determine the relationship between physical fitness and life satisfaction in a sample of university men and women. Participants (N = 28, Mage = 22.18 completed multiple indicators of physical fitness including cardiovascular fitness, muscular fitness, body composition and flexibility, and life satisfaction (SWLS. Descriptive and one-way between-groups ANOVAs were performed to determine gender differences on measures of life satisfaction and measures of fitness. In addition, the relationship between the five health-related components of fitness and life satisfaction were investigated using Pearson’s product–moment correlation coefficient. Analyses indicated there were no significant correlations between any of the health-related components of fitness and scores on the SWLS. There were significant gender differences on all physical fitness measures, except partial curl-ups, but no significant gender differences on life satisfaction. Our findings suggest that improved physical fitness does not have a relationship with higher life satisfaction measures. Further tests, utilizing larger sample sizes, are recommended.

  17. Cytoplasmic streaming velocity as a plant size determinant.

    Tominaga, Motoki; Kimura, Atsushi; Yokota, Etsuo; Haraguchi, Takeshi; Shimmen, Teruo; Yamamoto, Keiichi; Nakano, Akihiko; Ito, Kohji

    2013-11-11

    Cytoplasmic streaming is active transport widely occurring in plant cells ranging from algae to angiosperms. Although it has been revealed that cytoplasmic streaming is generated by organelle-associated myosin XI moving along actin bundles, the fundamental function in plants remains unclear. We generated high- and low-speed chimeric myosin XI by replacing the motor domains of Arabidopsis thaliana myosin XI-2 with those of Chara corallina myosin XI and Homo sapiens myosin Vb, respectively. Surprisingly, the plant sizes of the transgenic Arabidopsis expressing high- and low-speed chimeric myosin XI-2 were larger and smaller, respectively, than that of the wild-type plant. This size change correlated with acceleration and deceleration, respectively, of cytoplasmic streaming. Our results strongly suggest that cytoplasmic streaming is a key determinant of plant size. Furthermore, because cytoplasmic streaming is a common system for intracellular transport in plants, our system could have applications in artificial size control in plants. Copyright © 2013 Elsevier Inc. All rights reserved.

  18. Does copepod size determine food consumption of particulate feeding fish?

    Deurs, Mikael van; Koski, Marja; Rindorf, Anna

    2014-01-01

    on adult particulate feeding fish is unknown. In the present study, we investigated the hypothesis that the availability of the large copepods determines food consumption and growth conditions of lesser sandeel (Ammodytes marinus) in the North Sea. Analysis of stomach content suggested that food...... consumption is higher for fish feeding on large copepods, and additional calculations revealed how handling time limitation may provide part of the explanation for this relationship. Comparing stomach data and zooplankton samples indicated that lesser sandeel actively target large copepods when......The climate-induced reduction in the mean copepod size, mainly driven by a decrease in the abundance of the large Calanus finmarchicus around 1987, has been linked to the low survival of fish larvae in the North Sea. However, to what extent this sort of reduction in copepod size has any influence...

  19. Determinants of the Size of Public Expenditure in Nigeria

    Ezebuilo Romanus Ukwueze

    2015-12-01

    Full Text Available Analysis of public expenditure constitutes a central issue in public sector economics and public finance literature. Understanding the reasons for government spending growth has been a central concern of public sector economists. This is due to the fact that most economies of the world have consistently had increased government expenditures. Nigeria is not an exception. There is need to ascertain the determinants of size of government expenditure in Nigeria. Short-Run Error Correction Model and long-run static equation were used for comparing the influence of those variables on the size of government spending. The long-run static equation served as a test to compare short-run dynamics with the long-run relationships. Ordinary least squares (OLS estimation technique was used. The stationarity tests showed that none of the variables was stationary at level form, but only after their first difference. The results of this study show that the size of revenue and growth rate of national income (output and private investment significantly influence the size of public expenditure both in the short run and long run. External and domestic debts significantly influence the size of government expenditure only in the short run. It is recommended that the revenue base should be expanded; conducive environment should be created for private investment to thrive, and debt accumulation should be reduced and used for stabilization only in the short run. The conclusion to draw from this study is that revenue, private investment, and income boost public spending while public debts might be counterproductive.

  20. Bound to lose: physical incapacitation increases the conceptualized size of an antagonist in men.

    Daniel M T Fessler

    Full Text Available Because decision-making in situations of potential conflict hinges on assessing many features of the self and the foe, this process can be facilitated by summarizing diverse attributes in a single heuristic representation. Physical size and strength are evolutionarily ancient determinants of victory in conflict, and their relevance is reinforced during development. Accordingly, size and muscularity constitute ready dimensions for a summary representation of relative formidability, a perspective paralleled by the notion that social power is represented using envisioned relative size. Physical incapacitation constitutes a significant tactical disadvantage, hence temporary incapacitation should increase the envisioned size and strength of an antagonist. In Study 1, being bound to a chair increased men's estimates of the size of an angry man and decreased estimates of their own height. Study 2 conceptually replicated these effects: among men for whom standing on a balance board was challenging, the attendant experience of postural instability increased estimates of an angry man's size and muscularity, with similar patterns occurring at a reduced level among all but those whose equilibrium was apparently unaffected by this task.

  1. Generalized procedures for determining inspection sample sizes (related to quantitative measurements). Vol. 1: Detailed explanations

    Jaech, J.L.; Lemaire, R.J.

    1986-11-01

    Generalized procedures have been developed to determine sample sizes in connection with the planning of inspection activities. These procedures are based on different measurement methods. They are applied mainly to Bulk Handling Facilities and Physical Inventory Verifications. The present report attempts (i) to assign to appropriate statistical testers (viz. testers for gross, partial and small defects) the measurement methods to be used, and (ii) to associate the measurement uncertainties with the sample sizes required for verification. Working papers are also provided to assist in the application of the procedures. This volume contains the detailed explanations concerning the above mentioned procedures

  2. Representative volume size: A comparison of statistical continuum mechanics and statistical physics

    AIDUN,JOHN B.; TRUCANO,TIMOTHY G.; LO,CHI S.; FYE,RICHARD M.

    1999-05-01

    In this combination background and position paper, the authors argue that careful work is needed to develop accurate methods for relating the results of fine-scale numerical simulations of material processes to meaningful values of macroscopic properties for use in constitutive models suitable for finite element solid mechanics simulations. To provide a definite context for this discussion, the problem is couched in terms of the lack of general objective criteria for identifying the size of the representative volume (RV) of a material. The objective of this report is to lay out at least the beginnings of an approach for applying results and methods from statistical physics to develop concepts and tools necessary for determining the RV size, as well as alternatives to RV volume-averaging for situations in which the RV is unmanageably large. The background necessary to understand the pertinent issues and statistical physics concepts is presented.

  3. Determination of lesion size by ultrasound during radiofrequency catheter ablation.

    Awad, S; Eick, O

    2003-01-01

    The catheter tip temperature that is used to control the radiofrequency generator output poorly correlates to lesion size. We, therefore, evaluated lesions created in vitro using a B-mode ultrasound imaging device as a potential means to assess lesion generation during RF applications non-invasively. Porcine ventricular tissue was immersed in saline solution at 37 degrees C. The catheter was fixed in a holder and positioned in a parallel orientation to the tissue with an array transducer (7.5 MHz) app. 3 cm above the tissue. Lesions were produced either in a temperature controlled mode with a 4-mm tip catheter with different target temperatures (50, 60, 70 and 80 degrees C, 80 W maximum output) or in a power controlled mode (25, 50 and 75 W, 20 ml/min irrigation flow) using an irrigated tip catheter. Different contact forces (0.5 N, 1.0 N) were tested, and RF was delivered for 60 s. A total of 138 lesions was produced. Out of these, 128 could be identified on the ultrasound image. The lesion depth and volume was on average 4.1 +/- 1.6 mm and 52 +/- 53 mm3 as determined by ultrasound and 3.9 +/- 1.7 mm and 52 +/- 55 mm3 as measured thereafter, respectively. A linear correlation between the lesion size determined by ultrasound and that measured thereafter was demonstrated with a correlation coefficient of r = 0.87 for lesion depth and r = 0.93 for lesion volume. We conclude that lesions can be assessed by B-mode ultrasound imaging.

  4. Fabrication and physical properties of permalloy nano-size wires

    Yu, C.; Lee, S.F.; Yao, Y.D.; Wong, M.S.; Huang, E.W.; Ma, Y.-R.; Tsai, J.L.; Chang, C.R.

    2003-01-01

    Nano-size NiFe wires with patterned shapes in half-ring-in-series, octagon-in-series, and zigzag-in-series configurations were fabricated. Their magnetoresistance was studied below room temperature and their magnetic domain images were investigated at room temperature by a magnetic force microscope. In general, we have experimentally demonstrated that the variation of the magnetoresistance of our patterned nano-size wires can be related to different domain configurations and explained by the domain switching effect. The number of magnetic domain walls in our patterned wires can be controlled by the shape anisotropy and the size of each section of patterns that form the wires

  5. Determination of the optimal sample size for a clinical trial accounting for the population size.

    Stallard, Nigel; Miller, Frank; Day, Simon; Hee, Siew Wan; Madan, Jason; Zohar, Sarah; Posch, Martin

    2017-07-01

    The problem of choosing a sample size for a clinical trial is a very common one. In some settings, such as rare diseases or other small populations, the large sample sizes usually associated with the standard frequentist approach may be infeasible, suggesting that the sample size chosen should reflect the size of the population under consideration. Incorporation of the population size is possible in a decision-theoretic approach either explicitly by assuming that the population size is fixed and known, or implicitly through geometric discounting of the gain from future patients reflecting the expected population size. This paper develops such approaches. Building on previous work, an asymptotic expression is derived for the sample size for single and two-arm clinical trials in the general case of a clinical trial with a primary endpoint with a distribution of one parameter exponential family form that optimizes a utility function that quantifies the cost and gain per patient as a continuous function of this parameter. It is shown that as the size of the population, N, or expected size, N∗ in the case of geometric discounting, becomes large, the optimal trial size is O(N1/2) or O(N∗1/2). The sample size obtained from the asymptotic expression is also compared with the exact optimal sample size in examples with responses with Bernoulli and Poisson distributions, showing that the asymptotic approximations can also be reasonable in relatively small sample sizes. © 2016 The Author. Biometrical Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Determination of reactivity rates of silicate particle-size fractions

    Angélica Cristina Fernandes Deus

    2014-04-01

    Full Text Available The efficiency of sources used for soil acidity correction depends on reactivity rate (RR and neutralization power (NP, indicated by effective calcium carbonate (ECC. Few studies establish relative efficiency of reactivity (RER for silicate particle-size fractions, therefore, the RER applied for lime are used. This study aimed to evaluate the reactivity of silicate materials affected by particle size throughout incubation periods in comparison to lime, and to calculate the RER for silicate particle-size fractions. Six correction sources were evaluated: three slags from distinct origins, dolomitic and calcitic lime separated into four particle-size fractions (2, 0.84, 0.30 and <0.30-mm sieves, and wollastonite, as an additional treatment. The treatments were applied to three soils with different texture classes. The dose of neutralizing material (calcium and magnesium oxides was applied at equal quantities, and the only variation was the particle-size material. After a 90-day incubation period, the RER was calculated for each particle-size fraction, as well as the RR and ECC of each source. The neutralization of soil acidity of the same particle-size fraction for different sources showed distinct solubility and a distinct reaction between silicates and lime. The RER for slag were higher than the limits established by Brazilian legislation, indicating that the method used for limes should not be used for the slags studied here.

  7. The Determinants of Venture Capital Portfolio Size: Empirical Evidence

    Douglas J. Cumming

    2006-01-01

    This paper explores factors that affect portfolio size among a sample of venture capital financing data from 214 Canadian funds. Four categories of factors affect portfolio size: (1) the venture capital funds' characteristics, including the type of fund, fund duration, fund-raising, and the number of venture capital fund managers; (2) the entrepreneurial firms' characteristics, including stage of development, technology, and geographic location; (3) the nature of the financing transactions, i...

  8. Method and apparatus for physical separation of different sized nanostructures

    Roberts, Christopher B.; Saunders, Steven R.

    2012-07-10

    The present application provides apparatuses and methods for the size-selective fractionation of ligand-capped nanoparticles that utilizes the tunable thermophysical properties of gas-expanded liquids. The nanoparticle size separation processes are based on the controlled reduction of the solvent strength of an organic phase nanoparticle dispersion through increases in concentration of the antisolvent gas, such as CO.sub.2, via pressurization. The method of nanomaterial separation contains preparing a vessel having a solvent and dispersed nanoparticles, pressurizing the chamber with a gaseous antisolvent, and causing a first amount of the nanoparticles to precipitate, transporting the solution to a second vessel, pressurizing the second vessel with the gaseous antisolvent and causing further nanoparticles to separate from the solution.

  9. Anthropometric, physical and motor performance determinants of ...

    The most talented subjects (N = 39) were selected from 66 boys by means of a Talent Search testing protocol and then subjected to a sport specific test battery consisting of five anthropometric and 16 physical and motor variables. The results indicated that mean anaerobic power output, acceleration, body mass, reaction ...

  10. Automatic Determination of the Size of Elliptical Nanoparticles from AFM Images

    Sedlář, Jiří; Zitová, Barbara; Kopeček, Jaromír; Flusser, Jan; Todorcius, T.; Kratochvílová, Irena

    2013-01-01

    Roč. 15, č. 8 (2013), s. 1-10 ISSN 1388-0764 R&D Projects: GA ČR GAP103/11/1552; GA ČR(CZ) GAP304/10/1951; GA TA ČR TA01011165 Institutional support: RVO:67985556 ; RVO:68378271 Keywords : Atomic force microscopy * Image moments * Pyrrole derivatives * Size determination * Watershed segmentation Subject RIV: JD - Computer Applications, Robotics; BM - Solid Matter Physics ; Magnetism (FZU-D) Impact factor: 2.278, year: 2013 http://library.utia.cas.cz/separaty/2013/ZOI/sedlar-0394390.pdf

  11. Determination of the particle size distribution of an aerosol using a diffusion battery

    Maigne, Jean-Pierre

    1974-02-01

    The principal methods for the treatment of concentration measurements both upstream and downstream of a diffusion battery are reviewed and discussed, the purpose of the measurements being the determination of the aerosol particle size distribution. It is then demonstrated that the resolution of the equations arising from the problem leads to the imposing of physical constraints on the distribution sought, these constraints being more and more restrictive with increasing experimental inaccuracies. An algorithm is proposed which provides an approximate solution to the system of equations, certain predetermined criteria, and the constraints imposed on the distribution being taken into account. (author)

  12. Determining Sample Size for Accurate Estimation of the Squared Multiple Correlation Coefficient.

    Algina, James; Olejnik, Stephen

    2000-01-01

    Discusses determining sample size for estimation of the squared multiple correlation coefficient and presents regression equations that permit determination of the sample size for estimating this parameter for up to 20 predictor variables. (SLD)

  13. Techniques for determining physical zones of influence

    Hamann, Hendrik F; Lopez-Marrero, Vanessa

    2013-11-26

    Techniques for analyzing flow of a quantity in a given domain are provided. In one aspect, a method for modeling regions in a domain affected by a flow of a quantity is provided which includes the following steps. A physical representation of the domain is provided. A grid that contains a plurality of grid-points in the domain is created. Sources are identified in the domain. Given a vector field that defines a direction of flow of the quantity within the domain, a boundary value problem is defined for each of one or more of the sources identified in the domain. Each of the boundary value problems is solved numerically to obtain a solution for the boundary value problems at each of the grid-points. The boundary problem solutions are post-processed to model the regions affected by the flow of the quantity on the physical representation of the domain.

  14. Size structure, not metabolic scaling rules, determines fisheries reference points

    Andersen, Ken Haste; Beyer, Jan

    2015-01-01

    Impact assessments of fishing on a stock require parameterization of vital rates: growth, mortality and recruitment. For 'data-poor' stocks, vital rates may be estimated from empirical size-based relationships or from life-history invariants. However, a theoretical framework to synthesize...... these empirical relations is lacking. Here, we combine life-history invariants, metabolic scaling and size-spectrum theory to develop a general size- and trait-based theory for demography and recruitment of exploited fish stocks. Important concepts are physiological or metabolic scaled mortalities and flux...... is that larger species have a higher egg production per recruit than small species. This means that density dependence is stronger for large than for small species and has the consequence that fisheries reference points that incorporate recruitment do not obey metabolic scaling rules. This result implies...

  15. Improved sample size determination for attributes and variables sampling

    Stirpe, D.; Picard, R.R.

    1985-01-01

    Earlier INMM papers have addressed the attributes/variables problem and, under conservative/limiting approximations, have reported analytical solutions for the attributes and variables sample sizes. Through computer simulation of this problem, we have calculated attributes and variables sample sizes as a function of falsification, measurement uncertainties, and required detection probability without using approximations. Using realistic assumptions for uncertainty parameters of measurement, the simulation results support the conclusions: (1) previously used conservative approximations can be expensive because they lead to larger sample sizes than needed; and (2) the optimal verification strategy, as well as the falsification strategy, are highly dependent on the underlying uncertainty parameters of the measurement instruments. 1 ref., 3 figs

  16. Strategy for determination of an efficient Cochleate particle size.

    Gil, Danay; Bracho, Gustavo; Zayas, Caridad; del Campo, Judith; Acevedo, Reinaldo; Toledo, Arturo; Lastre, Miriam; Pérez, Oliver

    2006-04-12

    Cochleate structures obtained from the outer membrane of Neisseria meningitidis serotype B have demonstrated to be high immunogenicity when administrated by intramuscular, oral or intranasal routes, and could be used as adjuvant and meningococcal nasal vaccine candidate. Due to the microparticulate nature of Cochleate it is necessary to control the particle size since it capture by cells of the immune system could be affected by this aspect. We combined optic microscopy and immunisation experiments to select the optimum particle size. Six different processes of producing Cochleate obtaining were evaluated and different mechanical stress conditions were carried out to homogenize and modulate the particles size. The more immunogenic particles were selected on the basis of the levels of specific IgA and IgG antibodies induced after intranasal immunisation in mice. The best treatment parameter for mechanical stress of the Cochleate was prolonged treatment with untrasonic low frequency waves.

  17. Physical phenomena as sense determinate occurrences

    Sommer, H.J.

    2005-01-01

    In the view of El Naschie's E Infinity theory [Chaos, Solitons and Fractals 22 (2004) 495], our physical laws emerge from a chaotic underground, a 'Dirac-sea'. But we have no direct access from our observations to this chaotic world and this implies that the meaning of the correspondence between the phenomena we obtain by our cognition and their causal structures remains hidden to us. The fundamental process which produces our cognition is the 'constitution of sense'. A formal description of this process will be presented. We use Dempster Shafer's belief calculus to define 'belief' and motivate an Anticipation Principle: 'Put the measurements obtained from the world in such an order that the credibility of your forecasts will be maximized.' From this specification of the basic idea of what physical science ideally strives for, we are able to deduce a frame of reference for the formation of phenomena out of arbitrary sets of measurements. Reality is formed by these 'observable phenomena'. In this emerging reality, we recognize characteristic effects and principles of modern physics: Einstein's Postulate of Relativity, Entanglement, and the Quantum Zeno Effect. The presented view of reality is closely related to the ideas that had been presented hundred years ago by Ernst Mach and which recently J. Anandan generalized in his concept of a 'Relational Reality'

  18. Determination of the void nucleation rate from void size distributions

    Brailsford, A.D.

    1977-01-01

    A method of estimating the void nucleation rate from one void size distribution and from observation of the maximum void radius at prior times is proposed. Implicit in the method are the assumptions that both variations in the critical radius with dose and vacancy thermal emission processes during post-nucleation quasi-steady-state growth may be neglected. (Auth.)

  19. Fast and accurate determination of modularity and its effect size

    Treviño, Santiago III; Nyberg, Amy; Bassler, Kevin E; Del Genio, Charo I

    2015-01-01

    We present a fast spectral algorithm for community detection in complex networks. Our method searches for the partition with the maximum value of the modularity via the interplay of several refinement steps that include both agglomeration and division. We validate the accuracy of the algorithm by applying it to several real-world benchmark networks. On all these, our algorithm performs as well or better than any other known polynomial scheme. This allows us to extensively study the modularity distribution in ensembles of Erdős–Rényi networks, producing theoretical predictions for means and variances inclusive of finite-size corrections. Our work provides a way to accurately estimate the effect size of modularity, providing a z-score measure of it and enabling a more informative comparison of networks with different numbers of nodes and links. (paper)

  20. FIRST VLTI-MIDI DIRECT DETERMINATIONS OF ASTEROID SIZES

    Delbo, M.; Ligori, S.; Cellino, A.; Matter, A.; Berthier, J.

    2009-01-01

    We have obtained the first successful interferometric measurements of asteroid sizes and shapes by means of the Very Large Telescope Interferometer-Mid-Infrared Interferometric Instrument (VLTI-MIDI). The VLTI can spatially resolve asteroids in a range of sizes and heliocentric distances that are not accessible to other techniques such as adaptive optics and radar. We have observed, as a typical bench mark, the asteroid (951) Gaspra, visited in the past by the Galileo space probe, and we derive a size in good agreement with the ground truth coming from the in situ measurements by the Galileo mission. Moreover, we have also observed the asteroid (234) Barbara, known to exhibit unusual polarimetric properties, and we found evidence of a potential binary nature. In particular, our data are best fit by a system of two bodies of 37 and 21 km in diameter, separated by a center-to-center distance of ∼24 km (projected along the direction of the baseline at the epoch of our observations).

  1. Fish egg size: a characteristic determined by parental care

    Rosana RM Mazzoni

    2015-12-01

    Full Text Available The existence of a trade-off between relative batch fecundity and egg size has been widely documented (e.g. Brown & Shine 2009. Studies on the evolution of parental care and its relationship with fish egg size were stimulated by the work of Shine (1978, who proposed several possible hypotheses, including one that predicted that the onset of parental care preceded the increase in egg size. This hypothesis has since been challenged by Nussbaum & Schultz (1989 and more recently by Summers et al. (2006, who proposed an alternative hypothesis in which the evolution of large eggs was said to precede the evolution of parental care and not the reverse. Here, we examined 313 species of bony fish, including 152 species with parental care (PC and 161 species without parental care (NPC, and found evidence that fully supports the hypothesis of Shine (1978. Additionally, we explain how strengthening this hypothesis could impact the development of phylogenies. We also make suggestions for future studies on gene regulatory mechanisms that could explain the evolution of parental care and egg size in bony fish within a more modern context of developmental ecology. Our analysis uses data describing the mean size of ripe eggs and the occurrence of parental care in 313 species of bony fish belonging to 53 families in 11 orders. Data for 22 of the 313 species were collected by us from the Tocantins River. Data for the remaining species were obtained from the literature: 6 species from the Paraná River (Suzuki et al. 2000, 149 species from large African lakes and some pelagic marine species (Duponchelle et al. 2008, 74 marine species (Pauly & Pullin 1988, and 65 species from the Tocantins River (Neuberger 2010. Of these 313 total species, 161 (51.4% are PC species and 152 (48.6% are NPC species. We analyzed a minimum of eight mature females from each of the 16 species we collected, and for each female, we measured 10 mature oocytes and derived the mean diameter of

  2. Elementary physical education: A focus on fitness activities and smaller class sizes are associated with higher levels of physical activity

    Mandy Kirkham-King

    2017-12-01

    Full Text Available Optimizing physical activity during physical education is necessary for children to achieve daily physical activity recommendations. The purpose of this study was to examine the relationship among various contextual factors with accelerometer measured physical activity during elementary physical education. Data were collected during 2015–2016 from 281 students (1st–5th grade, 137 males, 144 females from a private school located in a metropolitan area of Utah in the U.S. Students wore accelerometers for 12 consecutive weeks at an accelerometer wear frequency of 3days per week during physical education. A multi-level general linear mixed effects model was employed to examine the relationship among various physical education contextual factors and percent of wear time in moderate-to-vigorous physical activity (%MVPA, accounting for clustering of observations within students and the clustering of students within classrooms. Explored contextual factors included grade level, lesson context, sex, and class size. Main effects and interactions among the factors were explored in the multi-level models. A two-way interaction of lesson context and class size on %MVPA was shown to be statistically significant. The greatest differences were found to be between fitness lessons using small class sizes compared to motor skill lessons using larger class sizes (β=14.8%, 95% C.I. 5.7%–23.9% p<0.001. Lessons that included a focus on fitness activities with class sizes that were <25 students associated with significantly higher %MVPA during elementary physical education. Keywords: Exercise, Physical education and training, Adolescents

  3. Socioeconomic Determinants of Physical Inactivity among Japanese Workers

    Kumagai, Narimasa

    2012-01-01

    Background: Half of Japanese workers are physically inactive, but there are no studies on the relation between the leisure-time physical inactivity of Japanese workers and their socioeconomic status. The proportion of female workers who are physically inactive has been larger than that of male workers. Objectives: Using micro-data from nationwide surveys in Japan, this study explored the gender differences in socioeconomic determinants of leisure-time physical inactivity. Methods: We first es...

  4. Determining the optimum cell size of digital elevation model for ...

    These methods were applied to determine the level artifacts (interpolation error) in DEM surface as well as derived stream ... the storage disk and computer's processing power. Thus, such .... The concept of entropy or theory of information.

  5. An integrated approach for multi-level sample size determination

    Lu, M.S.; Teichmann, T.; Sanborn, J.B.

    1997-01-01

    Inspection procedures involving the sampling of items in a population often require steps of increasingly sensitive measurements, with correspondingly smaller sample sizes; these are referred to as multilevel sampling schemes. In the case of nuclear safeguards inspections verifying that there has been no diversion of Special Nuclear Material (SNM), these procedures have been examined often and increasingly complex algorithms have been developed to implement them. The aim in this paper is to provide an integrated approach, and, in so doing, to describe a systematic, consistent method that proceeds logically from level to level with increasing accuracy. The authors emphasize that the methods discussed are generally consistent with those presented in the references mentioned, and yield comparable results when the error models are the same. However, because of its systematic, integrated approach the proposed method elucidates the conceptual understanding of what goes on, and, in many cases, simplifies the calculations. In nuclear safeguards inspections, an important aspect of verifying nuclear items to detect any possible diversion of nuclear fissile materials is the sampling of such items at various levels of sensitivity. The first step usually is sampling by ''attributes'' involving measurements of relatively low accuracy, followed by further levels of sampling involving greater accuracy. This process is discussed in some detail in the references given; also, the nomenclature is described. Here, the authors outline a coordinated step-by-step procedure for achieving such multilevel sampling, and they develop the relationships between the accuracy of measurement and the sample size required at each stage, i.e., at the various levels. The logic of the underlying procedures is carefully elucidated; the calculations involved and their implications, are clearly described, and the process is put in a form that allows systematic generalization

  6. Lean body mass as a determinant of thyroid size

    Wesche, M. F.; Wiersinga, W. M.; Smits, N. J.

    1998-01-01

    Males have a larger thyroid gland than females, and this has been related to the difference in body weight. In view of the different body composition of men and women, we hypothesized that lean body mass is a better determinant of thyroid volume than body weight. A cross-sectional study in an area

  7. Geographic range size and determinants of avian species richness

    Jetz, Walter; Rahbek, Carsten

    2002-01-01

    Geographic patterns in species richness are mainly based on wide-ranging species because their larger number of distribution records has a disproportionate contribution to the species richness counts. Here we demonstrate how this effect strongly influences our understanding of what determines spe...

  8. Optimum size determination of nuclear dual-purpose desalination plants

    Gaussens, J.

    1966-01-01

    The economics of dual-purpose desalination plants is presented from a general standpoint. The concept of demand curves for water and electricity is introduced, which leads to a rational sharing of production costs between both commodities within the framework of a market. The purpose of the study, which is based upon the principles of classical economics, is to develop objective criteria for the design of desalination plants and to derive from these a normative method for pricing both joint products, water and electricity, following as much as possible the structure of the demand. Such criteria are in particular either the maximization of benefit for the operator or the maximum welfare for the community. They involve either equality between marginal costs and revenues, or equality between marginal costs and marginal satisfactions (theory of surplus). As the size of the plant is often the predominant factor in selecting the process to be used, it follows from the above considerations that this selection is closely related to: (a) The shape of the demand curve for water; (b) The economic criterion selected and the relevant constraints (public or private ownership, limitation of the investments, etc). This makes market surveys and a rather refined economic analysis indispensable before any decision is taken on the desalination technique to be adopted. (author). Abstract only

  9. Preoperative estimation of the pathological breast tumour size by physical examination, mammography and ultrasound: a prospective study on 105 invasive tumours

    Bosch, Anne M.; Kessels, Alfons G.H.; Beets, Geerard L.; Rupa, Jan D.; Koster, Dick; Engelshoven, Jos M.A. van; Meyenfeldt, Maarten F. von

    2003-01-01

    Objective: The clinical breast tumour size can be assessed preoperatively by physical examination, mammography and ultrasound. At present it is not clear which modality correlates best with the histological invasive breast tumour size. This prospective study aims to determine the most accurate clinical method (physical examination, mammography or ultrasound) to predict the histological invasive tumour size preoperatively. Methods and patients: Between October 1999 and August 2000, 96 women with 105 invasive malignant breast tumours were included in this study. All patients underwent excision and the tumour size was measured on histology. Tumour size was measured by all three modalities in 73 cases. Results were evaluated by calculating correlation coefficients. The examination modalities presenting the best estimation of the pathological tumour size were used in a stepwise linear regression analysis to construct a formula predicting the pathological tumour size from the result of the various diagnostic modalities. Results: The correlation coefficient between ultrasound and pathological size (r=0.68) was significantly better than the correlations between physical examination and pathological size (r=0.42) and mammographic and pathological size (r=0.44). Physical examination overestimates and ultrasound underestimates breast tumour classification. The most accurate prediction formula was: Pathological tumour size (mm) equals sonographic tumour size (mm)+3 mm. Conclusion: When comparing physical examination, mammography and ultrasound for the prediction of the pathological size of a malignant breast tumour, ultrasound is the best predictor. The ensuing regression formula determines pathological size as tumour size by ultrasound+3 mm. However, with the wide 95% confidence interval of ±11 mm, it remains difficult to predict the exact pathological size for an individual invasive breast tumour. A small deviation in millimetres of the tumour size could lead to a change in

  10. Normal hepatic and splenic size in children: Scintigraphic determination

    Markisz, J.A.; New York Hospital - Cornell Medical Center, NY; Treves, S.T.; Davis, T.

    1987-01-01

    Measurements were made on sulfur colloid scintigrams of normal pediatric livers and spleens by analyzing 131 scans from 116 patients referred for liver or spleen trauma. Studies were used only if scans were normal, there was no history of malignancy or hepatic or splenic disease either prior to of after the study. Linear correlation was made with age, weight and both age and weight. All measured parameters correlated better with weight than with age, with vertical liver dimension exhibiting the best correlation (r=0.848). Multivariate analysis demonstrated uniformly better correlation of all measurements with both age and weight. Spleen and liver volumes were calculated assuming simple geometry, and showed excellent correlations. Graphical presentation of data will be useful in the clinical determination of hepatomegaly or splenomegaly in routine scintigraphy. (orig.)

  11. Normal hepatic and splenic size in children: Scintigraphic determination

    Markisz, J.A.; Treves, S.T.; Davis, T.

    1987-05-01

    Measurements were made on sulfur colloid scintigrams of normal pediatric livers and spleens by analyzing 131 scans from 116 patients referred for liver or spleen trauma. Studies were used only if scans were normal, there was no history of malignancy or hepatic or splenic disease either prior to of after the study. Linear correlation was made with age, weight and both age and weight. All measured parameters correlated better with weight than with age, with vertical liver dimension exhibiting the best correlation (r=0.848). Multivariate analysis demonstrated uniformly better correlation of all measurements with both age and weight. Spleen and liver volumes were calculated assuming simple geometry, and showed excellent correlations. Graphical presentation of data will be useful in the clinical determination of hepatomegaly or splenomegaly in routine scintigraphy.

  12. 13 CFR 121.1009 - What are the procedures for making the size determination?

    2010-01-01

    ... small for purposes of a particular procurement, the concern cannot later become eligible for the.... (b) Basis for determination. The size determination will be based primarily on the information... whose size status is at issue. The determination, however, may also be based on grounds not raised in...

  13. What big size you have! Using effect sizes to determine the impact of public health nursing interventions.

    Johnson, K E; McMorris, B J; Raynor, L A; Monsen, K A

    2013-01-01

    The Omaha System is a standardized interface terminology that is used extensively by public health nurses in community settings to document interventions and client outcomes. Researchers using Omaha System data to analyze the effectiveness of interventions have typically calculated p-values to determine whether significant client changes occurred between admission and discharge. However, p-values are highly dependent on sample size, making it difficult to distinguish statistically significant changes from clinically meaningful changes. Effect sizes can help identify practical differences but have not yet been applied to Omaha System data. We compared p-values and effect sizes (Cohen's d) for mean differences between admission and discharge for 13 client problems documented in the electronic health records of 1,016 young low-income parents. Client problems were documented anywhere from 6 (Health Care Supervision) to 906 (Caretaking/parenting) times. On a scale from 1 to 5, the mean change needed to yield a large effect size (Cohen's d ≥ 0.80) was approximately 0.60 (range = 0.50 - 1.03) regardless of p-value or sample size (i.e., the number of times a client problem was documented in the electronic health record). Researchers using the Omaha System should report effect sizes to help readers determine which differences are practical and meaningful. Such disclosures will allow for increased recognition of effective interventions.

  14. Determinant Factors of Physical Fitness in European Children

    Zaqout, Mahmoud; Vyncke, Krishna; Moreno, Luis A.

    2016-01-01

    Objectives: This study was designed to explore the determinants of physical fitness in European children aged 6–11 years, cross-sectionally and longitudinally.Methods: There were sufficient data on 4903 children (50.6 % girls) on measured physical fitness (cardio-respiratory, muscular strength, f...

  15. Mesh size in Lichtenstein repair: a systematic review and meta-analysis to determine the importance of mesh size.

    Seker, D; Oztuna, D; Kulacoglu, H; Genc, Y; Akcil, M

    2013-04-01

    Small mesh size has been recognized as one of the factors responsible for recurrence after Lichtenstein hernia repair due to insufficient coverage or mesh shrinkage. The Lichtenstein Hernia Institute recommends a 7 × 15 cm mesh that can be trimmed up to 2 cm from the lateral side. We performed a systematic review to determine surgeons' mesh size preference for the Lichtenstein hernia repair and made a meta-analysis to determine the effect of mesh size, mesh type, and length of follow-up time on recurrence. Two medical databases, PubMed and ISI Web of Science, were systematically searched using the key word "Lichtenstein repair." All full text papers were selected. Publications mentioning mesh size were brought for further analysis. A mesh surface area of 90 cm(2) was accepted as the threshold for defining the mesh as small or large. Also, a subgroup analysis for recurrence pooled proportion according to the mesh size, mesh type, and follow-up period was done. In total, 514 papers were obtained. There were no prospective or retrospective clinical studies comparing mesh size and clinical outcome. A total of 141 papers were duplicated in both databases. As a result, 373 papers were obtained. The full text was available in over 95 % of papers. Only 41 (11.2 %) papers discussed mesh size. In 29 studies, a mesh larger than 90 cm(2) was used. The most frequently preferred commercial mesh size was 7.5 × 15 cm. No papers mentioned the size of the mesh after trimming. There was no information about the relationship between mesh size and patient BMI. The pooled proportion in recurrence for small meshes was 0.0019 (95 % confidence interval: 0.007-0.0036), favoring large meshes to decrease the chance of recurrence. Recurrence becomes more marked when follow-up period is longer than 1 year (p < 0.001). Heavy meshes also decreased recurrence (p = 0.015). This systematic review demonstrates that the size of the mesh used in Lichtenstein hernia repair is rarely

  16. Body size satisfaction and physical activity levels among men and women.

    Kruger, Judy; Lee, Chong-Do; Ainsworth, Barbara E; Macera, Caroline A

    2008-08-01

    Body size satisfaction may be an important factor associated with physical activity. We analyzed data from the 2002 National Physical Activity and Weight Loss Survey (NPAWLS), a population-based cross-sectional telephone survey of US adults. Multiple logistic regression models were used to examine the association of body size satisfaction on being regularly active. Participants were aged > or =18 years with complete data on weight, race/ethnicity, physical activity level, and body size satisfaction (n = 10,021). More than half of men (55.8%) and women (53.3%) who reported being very satisfied with the body size were regularly active. After adjustment for covariates, participants who reported being somewhat or not satisfied with their body size had a 13 and 44% lower odds of being regularly active, respectively, compared with those very satisfied with their body size. When stratified by race/ethnicity, this association remained in whites (P for trend physical activity than those less satisfied. Further research is needed to explore predictors of physical activity to reduce health disparities.

  17. Transverse micro-erosion meter measurements; determining minimum sample size

    Trenhaile, Alan S.; Lakhan, V. Chris

    2011-11-01

    Two transverse micro-erosion meter (TMEM) stations were installed in each of four rock slabs, a slate/shale, basalt, phyllite/schist, and sandstone. One station was sprayed each day with fresh water and the other with a synthetic sea water solution (salt water). To record changes in surface elevation (usually downwearing but with some swelling), 100 measurements (the pilot survey), the maximum for the TMEM used in this study, were made at each station in February 2010, and then at two-monthly intervals until February 2011. The data were normalized using Box-Cox transformations and analyzed to determine the minimum number of measurements needed to obtain station means that fall within a range of confidence limits of the population means, and the means of the pilot survey. The effect on the confidence limits of reducing an already small number of measurements (say 15 or less) is much greater than that of reducing a much larger number of measurements (say more than 50) by the same amount. There was a tendency for the number of measurements, for the same confidence limits, to increase with the rate of downwearing, although it was also dependent on whether the surface was treated with fresh or salt water. About 10 measurements often provided fairly reasonable estimates of rates of surface change but with fairly high percentage confidence intervals in slowly eroding rocks; however, many more measurements were generally needed to derive means within 10% of the population means. The results were tabulated and graphed to provide an indication of the approximate number of measurements required for given confidence limits, and the confidence limits that might be attained for a given number of measurements.

  18. Visual search for conjunctions of physical and numerical size shows that they are processed independently.

    Sobel, Kenith V; Puri, Amrita M; Faulkenberry, Thomas J; Dague, Taylor D

    2017-03-01

    The size congruity effect refers to the interaction between numerical magnitude and physical digit size in a symbolic comparison task. Though this effect is well established in the typical 2-item scenario, the mechanisms at the root of the interference remain unclear. Two competing explanations have emerged in the literature: an early interaction model and a late interaction model. In the present study, we used visual conjunction search to test competing predictions from these 2 models. Participants searched for targets that were defined by a conjunction of physical and numerical size. Some distractors shared the target's physical size, and the remaining distractors shared the target's numerical size. We held the total number of search items fixed and manipulated the ratio of the 2 distractor set sizes. The results from 3 experiments converge on the conclusion that numerical magnitude is not a guiding feature for visual search, and that physical and numerical magnitude are processed independently, which supports a late interaction model of the size congruity effect. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  19. The shape of beauty: determinants of female physical attractiveness.

    Fisher, Maryanne L; Voracek, Martin

    2006-06-01

    Rarely has one research area gained as much attention as that which is observed for female physical attractiveness. The past decade has resulted in numerous, exciting developments, particularly with respect to three proposed determinants of beauty: waist to hip ratio (WHR), body mass index (BMI), and curvaceousness. The goal of our paper is to provide a highly necessary review of contemporary research on the female attractiveness, including an in-depth examination of these factors. In our review, we first discuss WHR, an index of fat deposition, which is calculated by measuring the circumference of the waist compared to the circumference of the hips. WHR is controlled by the sex hormones, and increases as women age, and hence, may influence perceptions of attractiveness. This factor has been hotly contested, as some researchers have claimed that a WHR of approximately 0.7 is universally most attractive, whereas others have found inconsistent findings, or suggest the importance of other factors, such as BMI. Body mass index (BMI), calculated by dividing the body weight (in kilograms) by height (in meters) squared, serves as a measure of body fat. Although WHR and BMI are correlated, they lead to different conclusions, and the importance of BMI as a measure of female attractiveness is debated in the literature. Similar to WHR research, BMI and its role in attractiveness is not cross-culturally consistent and is affected by the availability of resources within a given environment. It may be the case that both WHR and BMI influence female attractiveness. However, there has been little investigation of this possibility. We have explored this issue in our research, which revealed that both influence attractiveness, but in addition, we noticed that curvaceousness was also a factor. Curvaceousness is the degree of "hourglass" shape as determined, for example, by the size of the bust, relative to the circumference of the hips and waist, and the size of the buttocks. However

  20. 13 CFR 121.303 - What size procedures are used by SBA before it makes a formal size determination?

    2010-01-01

    ... source. (b) A small business investment company, a development company, a surety bond company, or a... area in which the headquarters of the applicant is located, regardless of the location of the parent company or affiliates. For disaster loan assistance, the request for a size determination must be made to...

  1. Adding effect sizes to a systematic review on interventions for promoting physical activity among European teenagers

    Crutzen Rik

    2010-04-01

    Full Text Available Abstract This commentary adds effect sizes to the recently published systematic review by De Meester and colleagues and provides a more detailed insight into the effectiveness of interventions to promote physical activity among European teenagers. The main findings based on this evidence were: (1 school-based interventions generally lead to short term improvement in physical activity levels, but there were large differences between interventions with regard to effect sizes; (2 a multi-component approach (including environmental components generally resulted in larger effect sizes, thereby providing evidence for the assumption that a multi-component approach should produce synergistic results; and (3 if an intervention aimed to affect more health behaviours besides physical activity, then the intervention appeared to be less effective in favour of physical activity.

  2. Sample Size Determination for One- and Two-Sample Trimmed Mean Tests

    Luh, Wei-Ming; Olejnik, Stephen; Guo, Jiin-Huarng

    2008-01-01

    Formulas to determine the necessary sample sizes for parametric tests of group comparisons are available from several sources and appropriate when population distributions are normal. However, in the context of nonnormal population distributions, researchers recommend Yuen's trimmed mean test, but formulas to determine sample sizes have not been…

  3. A life course examination of the physical environmental determinants of physical activity behaviour: A "Determinants of Diet and Physical Activity" (DEDIPAC) umbrella systematic literature review.

    Carlin, Angela; Perchoux, Camille; Puggina, Anna; Aleksovska, Katina; Buck, Christoph; Burns, Con; Cardon, Greet; Chantal, Simon; Ciarapica, Donatella; Condello, Giancarlo; Coppinger, Tara; Cortis, Cristina; D'Haese, Sara; De Craemer, Marieke; Di Blasio, Andrea; Hansen, Sylvia; Iacoviello, Licia; Issartel, Johann; Izzicupo, Pascal; Jaeschke, Lina; Kanning, Martina; Kennedy, Aileen; Lakerveld, Jeroen; Chun Man Ling, Fiona; Luzak, Agnes; Napolitano, Giorgio; Nazare, Julie-Anne; Pischon, Tobias; Polito, Angela; Sannella, Alessandra; Schulz, Holger; Sohun, Rhoda; Steinbrecher, Astrid; Schlicht, Wolfgang; Ricciardi, Walter; MacDonncha, Ciaran; Capranica, Laura; Boccia, Stefania

    2017-01-01

    Participation in regular physical activity is associated with a multitude of health benefits across the life course. However, many people fail to meet PA recommendations. Despite a plethora of studies, the evidence regarding the environmental (physical) determinants of physical activity remains inconclusive. To identify the physical environmental determinants that influence PA across the life course. An online systematic literature search was conducted using MEDLINE, ISI Web of Science, Scopus and SPORTDiscus. The search was limited to studies published in English (January 2004 to April 2016). Only systematic literature reviews (SLRs) and meta-analyses (MAs) of observational studies, that investigated the association between physical determinants and physical activity outcomes, were eligible for inclusion. The extracted data were assessed on the importance of determinants, strength of evidence and methodological quality. The literature search identified 28 SLRs and 3 MAs on 67 physical environmental characteristics potentially related to physical activity that were eligible for inclusion. Among preschool children, a positive association was reported between availability of backyard space and outdoor toys/equipment in the home and overall physical activity. The availability of physical activity programs and equipment within schools, and neighbourhood features such as pedestrian and cyclist safety structure were positively associated with physical activity in children and adolescents. Negative street characteristics, for example, lack of sidewalks and streetlights, were negatively associated with physical activity in adults. Inconsistent associations were reported for the majority of reviewed determinants in adults. This umbrella SLR provided a comprehensive overview of the physical environment determinants of physical activity across the life course and has highlighted, particularly amongst youth, a number of key determinants that may be associated with overall

  4. SCOPING STUDIES TO DEVELOP A METHOD TO DETERMINE PARTICLE SIZE IN SIMULANT SLUDGE SLURRIES BY SIEVING

    DAMON, CLICK

    2005-01-01

    A physical separation method (i.e. sieving) was investigated to determine particle size distribution in non-radioactive sludge slurry simulants with the goal of implementation into the SRNL (Savannah River National Laboratory) shielded cells for use with radioactive sludge slurries. The investigation included obtaining the necessary experimental equipment, developing accessory equipment for use with the sieve shaker (to be able to sieve simulant slurries with aqueous solutions), sieving three different simulant slurries through a number of sieves and determining the particle size distribution gravimetrically, and developing a sufficient cleaning protocol of the sieves for re-use. The experimental protocol involved successive sieving of a NIST standard (to check the particle size retention of the sieves) and three non-radioactive slurry simulants (Batch 3 Tank 40 Test 3, Tank 40 Drum 3 and CETL Sludge Batch 2, which had been previously characterized by Microtrac analysis) through smaller and smaller sieves (150 microns x 5 microns) via use of the wet sieving system or by hand. For each of the three slurries, duplicate experiments were carried out using filtered supernate and DI water (to check the accuracy of the method versus Microtrac data) to sieve the slurry. Particle size determinations using the wet sieving system with DI water agree well with Microtrac data on a volume basis and in some cases the sieving data may be more accurate particularly if the material sieved had large particles. A correction factor had to be applied to data obtained from experiments done with supernate due to the dissolved solids which dried upon the sieves in the drying stage of the experiments. Upon subtraction of the correction factors, the experimental results were very similar to those obtained with DI water. It should be noted that approximately 250 mL of each of three simulant slurries was necessary to have enough filtered supernate available to carry out the experiments. The

  5. Determinants of physical activity frequency and provider advice during pregnancy.

    Santo, Eilann C; Forbes, Peter W; Oken, Emily; Belfort, Mandy B

    2017-09-05

    Our aims were to (1) describe the frequency of physical activity and prenatal healthcare provider advice about physical activity during pregnancy and (2) examine determinants and correlates of 3rd trimester physical activity and receipt of physical activity advice. We analyzed data from the 2008 Pregnancy Risk Assessment Monitoring System. We studied 2669 women from North Carolina and Colorado with data on physical activity frequency in the 3 months prior to pregnancy and during the 3rd trimester and 1584 women from Oklahoma with data on provider advice regarding physical activity during pregnancy. Respondents reported physical activity, defined as 30 min or more of exercise/physical activity (excluding vocationally related activity), in in these categories: pregnancy was strongly associated with low likelihood of ACOG guideline adherence in the 3rd trimester (aOR 0.10, 95% CU 0.04, 0.30 vs. 1-4 days/week). Underweight women were more likely to adhere to ACOG guidelines than normal weight women (aOR 2.27, 95% CI 1.36, 3.79). Overweight women were more likely to receive physical activity advice (aOR 2.9, 95% CI 1.3, 6.3 vs. normal weight), but obese women were not (aOR 0.65, 95% CI 0.4, 1.2). Few women meet ACOG guideline criteria for physical activity during pregnancy. Improving physical activity and weight status prior to pregnancy may improve activity levels during pregnancy. Nearly one third did not receive advice about physical activity during prenatal care. Obese women were no more likely to receive advice than their normal weight counterparts, indicating the need for targeted physical activity counseling in this population.

  6. Body size, physical activity and risk of colorectal cancer with or without the CpG island methylator phenotype (CIMP.

    Laura A E Hughes

    Full Text Available BACKGROUND: We investigated how body size and physical activity influence the risk of the CpG island methylator phenotype (CIMP in colorectal cancer (CRC. METHODS: In the Netherlands Cohort Study (n = 120,852, risk factors were self-reported at baseline in 1986. After 7.3 years of follow-up, 603 cases and 4,631 sub-cohort members were available. CIMP status according to the Weisenberger markers was determined using methylation specific PCR on DNA from paraffin embedded tumor tissue. Hazard rate ratios (HR and 95% confidence intervals for CIMP (27.7% and non-CIMP (72.3% tumors were calculated according to BMI, BMI at age 20, BMI change, trouser/skirt size, height, and physical activity. RESULTS: BMI modeled per 5 kg/m(2 increase was associated with both CIMP and non-CIMP tumors, however, HRs were attenuated when additionally adjusted for trouser/skirt size. Trouser/skirt size, per 2 size increase, was associated with both tumor subtypes, even after adjustment for BMI (CIMP HR: 1.20, 95%CI: 1.01-1.43; non-CIMP HR: 1.14, 95%CI: 1.04-1.28. Height per 5 cm was associated with both tumor sub-types, but HRs were attenuated when adjusted for body weight. BMI at age 20 was positively associated with increased risk of CIMP tumors and the association was significantly less pronounced for non-CIMP tumors (P-heterogeneity = 0.01. Physical activity was inversely associated with both subtypes, but a dose-response association was observed only for non-CIMP tumors (P-trend = 0.02. CONCLUSIONS: Body size, especially central adiposity, may increase the risk of both CIMP and non-CIMP tumors. Body fat at young age may differentially influence risk. Physical activity appears to decrease the risk of CRC regardless of these molecular subtypes.

  7. Body size, physical activity and risk of colorectal cancer with or without the CpG island methylator phenotype (CIMP).

    Hughes, Laura A E; Simons, Colinda C J M; van den Brandt, Piet A; Goldbohm, R Alexandra; de Goeij, Anton F; de Bruïne, Adriaan P; van Engeland, Manon; Weijenberg, Matty P

    2011-04-05

    We investigated how body size and physical activity influence the risk of the CpG island methylator phenotype (CIMP) in colorectal cancer (CRC). In the Netherlands Cohort Study (n = 120,852), risk factors were self-reported at baseline in 1986. After 7.3 years of follow-up, 603 cases and 4,631 sub-cohort members were available. CIMP status according to the Weisenberger markers was determined using methylation specific PCR on DNA from paraffin embedded tumor tissue. Hazard rate ratios (HR) and 95% confidence intervals for CIMP (27.7%) and non-CIMP (72.3%) tumors were calculated according to BMI, BMI at age 20, BMI change, trouser/skirt size, height, and physical activity. BMI modeled per 5 kg/m(2) increase was associated with both CIMP and non-CIMP tumors, however, HRs were attenuated when additionally adjusted for trouser/skirt size. Trouser/skirt size, per 2 size increase, was associated with both tumor subtypes, even after adjustment for BMI (CIMP HR: 1.20, 95%CI: 1.01-1.43; non-CIMP HR: 1.14, 95%CI: 1.04-1.28). Height per 5 cm was associated with both tumor sub-types, but HRs were attenuated when adjusted for body weight. BMI at age 20 was positively associated with increased risk of CIMP tumors and the association was significantly less pronounced for non-CIMP tumors (P-heterogeneity = 0.01). Physical activity was inversely associated with both subtypes, but a dose-response association was observed only for non-CIMP tumors (P-trend = 0.02). Body size, especially central adiposity, may increase the risk of both CIMP and non-CIMP tumors. Body fat at young age may differentially influence risk. Physical activity appears to decrease the risk of CRC regardless of these molecular subtypes.

  8. Cardiovascular risk profile: Cross-sectional analysis of motivational determinants, physical fitness and physical activity

    Kiers Henri

    2010-10-01

    Full Text Available Abstract Background Cardiovascular risk factors are associated with physical fitness and, to a lesser extent, physical activity. Lifestyle interventions directed at enhancing physical fitness in order to decrease the risk of cardiovascular diseases should be extended. To enable the development of effective lifestyle interventions for people with cardiovascular risk factors, we investigated motivational, social-cognitive determinants derived from the Theory of Planned Behavior (TPB and other relevant social psychological theories, next to physical activity and physical fitness. Methods In the cross-sectional Utrecht Police Lifestyle Intervention Fitness and Training (UP-LIFT study, 1298 employees (aged 18 to 62 were asked to complete online questionnaires regarding social-cognitive variables and physical activity. Cardiovascular risk factors and physical fitness (peak VO2 were measured. Results For people with one or more cardiovascular risk factors (78.7% of the total population, social-cognitive variables accounted for 39% (p In addition to the prediction of intention to engage in physical activity and physical active behavior, we explored the impact of the intensity of physical activity. The intentsity of physical activity was only significantly related to physical active behavior (beta = .253, p 2 = .06, p 2 = .23, p For people with one or more cardiovascular risk factors, 39.9% had positive intentions to engage in physical activity and were also physically active, and 10.5% had a low intentions but were physically active. 37.7% had low intentions and were physically inactive, and about 11.9% had high intentions but were physically inactive. Conclusions This study contributes to our ability to optimize cardiovascular risk profiles by demonstrating an important association between physical fitness and social-cognitive variables. Physical fitness can be predicted by physical active behavior as well as by self-efficacy and the intensity of

  9. Influence of particle size on physical and sensory attributes of mango pulp powder

    Sharma, M.; Kadam, D. M.; Chadha, S.; Wilson, R. A.; Gupta, R. K.

    2013-09-01

    The present investigation was aimed to observe the effect of particle size on physical, sensory and thermal properties of foam-mat dried mango pulp powder. Mango pulp of Dussehri variety was foam-mat dried using 3% egg white at 65ºC. Dried foam-mats were pulverized and passed through a sieve shaker for obtaining three grades of powder with 50, 60, and 85 mesh size sieves. The particle size of these samples measured using laser diffraction particle size analyzer ranged from 191.26 to 296.19 μm. The data was analysed statistically using ANOVA of SAS. There was a linear increase in lightness (`L' value) with a decrease in particle size, however, `a' value decreased with a decrease in particle size, indicating the decrease in redness. An increase in bulk density and decrease in water solubility index and water absorption index % were observed with a decrease in particle size. Particle size had a significant effect on sensory parameters. Particle size in the range of 258.01 to 264.60μmwas found most acceptable with respect to sensory characteristics. This finding can be exploited for various commercial applicationswhere powder quality is dependent on the particle size and has foremost priority for end users.

  10. Preparation of gold nanoparticles and determination of their particles size via different methods

    Iqbal, Muhammad; Usanase, Gisele [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France); Oulmi, Kafia; Aberkane, Fairouz; Bendaikha, Tahar [Laboratory of Chemistry and Environmental Chemistry(LCCE), Faculty of Science, Material Science Department, University of Batna, 05000 (Algeria); Fessi, Hatem [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France); Zine, Nadia [Institut des Sciences Analytiques (ISA), Université Lyon, Université Claude Bernard Lyon-1, UMR-5180, 5 rue de la Doua, F-69100 Villeurbanne (France); Agusti, Géraldine [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France); Errachid, El-Salhi [Institut des Sciences Analytiques (ISA), Université Lyon, Université Claude Bernard Lyon-1, UMR-5180, 5 rue de la Doua, F-69100 Villeurbanne (France); Elaissari, Abdelhamid, E-mail: elaissari@lagep.univ-lyon1.fr [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France)

    2016-07-15

    Graphical abstract: Preparation of gold nanoparticles via NaBH{sub 4} reduction method, and determination of their particle size, size distribution and morphology by using different techniques. - Highlights: • Gold nanoparticles were synthesized by NaBH{sub 4} reduction method. • Excess of reducing agent leads to tendency of aggregation. • The particle size, size distribution and morphology were investigated. • Particle size was determined both experimentally as well as theoretically. - Abstract: Gold nanoparticles have been used in various applications covering both electronics, biosensors, in vivo biomedical imaging and in vitro biomedical diagnosis. As a general requirement, gold nanoparticles should be prepared in large scale, easy to be functionalized by chemical compound of by specific ligands or biomolecules. In this study, gold nanoparticles were prepared by using different concentrations of reducing agent (NaBH{sub 4}) in various formulations and their effect on the particle size, size distribution and morphology was investigated. Moreover, special attention has been dedicated to comparison of particles size measured by various techniques, such as, light scattering, transmission electron microscopy, UV spectrum using standard curve and particles size calculated by using Mie theory and UV spectrum of gold nanoparticles dispersion. Particle size determined by various techniques can be correlated for monodispersed particles and excess of reducing agent leads to increase in the particle size.

  11. Preparation of gold nanoparticles and determination of their particles size via different methods

    Iqbal, Muhammad; Usanase, Gisele; Oulmi, Kafia; Aberkane, Fairouz; Bendaikha, Tahar; Fessi, Hatem; Zine, Nadia; Agusti, Géraldine; Errachid, El-Salhi; Elaissari, Abdelhamid

    2016-01-01

    Graphical abstract: Preparation of gold nanoparticles via NaBH_4 reduction method, and determination of their particle size, size distribution and morphology by using different techniques. - Highlights: • Gold nanoparticles were synthesized by NaBH_4 reduction method. • Excess of reducing agent leads to tendency of aggregation. • The particle size, size distribution and morphology were investigated. • Particle size was determined both experimentally as well as theoretically. - Abstract: Gold nanoparticles have been used in various applications covering both electronics, biosensors, in vivo biomedical imaging and in vitro biomedical diagnosis. As a general requirement, gold nanoparticles should be prepared in large scale, easy to be functionalized by chemical compound of by specific ligands or biomolecules. In this study, gold nanoparticles were prepared by using different concentrations of reducing agent (NaBH_4) in various formulations and their effect on the particle size, size distribution and morphology was investigated. Moreover, special attention has been dedicated to comparison of particles size measured by various techniques, such as, light scattering, transmission electron microscopy, UV spectrum using standard curve and particles size calculated by using Mie theory and UV spectrum of gold nanoparticles dispersion. Particle size determined by various techniques can be correlated for monodispersed particles and excess of reducing agent leads to increase in the particle size.

  12. The Determinants of Participation in Physical Activity in Malaysia

    Cheah, Yong Kang; Poh, Bee Koon

    2014-01-01

    Objectives In light of the importance of physical activity, the aim of the present study is to examine the factors affecting participation in physical activity among adults in Malaysia. Methods A logistic regression model and the Third National Health and Morbidity Survey consisting of 30,992 respondents were used. Results Age, income, gender, education, marital status, region, house locality, job characteristics, and medical conditions are significantly associated with participation in physical activity. In particular, old individuals, high income earners, females, the well-educated, widowed or divorced individuals, East Malaysians, urban dwellers, the unemployed, and individuals who are not diagnosed with hypercholesterolemia are less likely to be physically active than others. Conclusion Because sociodemographic and health factors play an important role in determining physical activity, the government should take them into account when formulating policy. PMID:24955308

  13. DETERMINANTS OF LEISURE-TIME PHYSICAL ACTIVITY: EVIDENCE FROM MALAYSIA

    YONG KANG CHEAH; ANDREW K. G. TAN

    2014-01-01

    This paper examines how socio-demographic and health-lifestyle factors determine participation and duration of leisure-time physical activity in Malaysia. Based on the Malaysia Non-Communicable Disease Surveillance-1 data, Heckman's sample selection model is employed to estimate the probability to participate and duration on physical activity. Results indicate that gender, age, years of education and family illness history are significant in explaining participation probability in leisure-tim...

  14. Cardiovascular risk profile: cross-sectional analysis of motivational determinants, physical fitness and physical activity.

    Sassen, Barbara; Kok, Gerjo; Schaalma, Herman; Kiers, Henri; Vanhees, Luc

    2010-10-07

    Cardiovascular risk factors are associated with physical fitness and, to a lesser extent, physical activity. Lifestyle interventions directed at enhancing physical fitness in order to decrease the risk of cardiovascular diseases should be extended. To enable the development of effective lifestyle interventions for people with cardiovascular risk factors, we investigated motivational, social-cognitive determinants derived from the Theory of Planned Behavior (TPB) and other relevant social psychological theories, next to physical activity and physical fitness. In the cross-sectional Utrecht Police Lifestyle Intervention Fitness and Training (UP-LIFT) study, 1298 employees (aged 18 to 62) were asked to complete online questionnaires regarding social-cognitive variables and physical activity. Cardiovascular risk factors and physical fitness (peak VO2) were measured. For people with one or more cardiovascular risk factors (78.7% of the total population), social-cognitive variables accounted for 39% (p < .001) of the variance in the intention to engage in physical activity for 60 minutes every day. Important correlates of intention to engage in physical activity were attitude (beta = .225, p < .001), self-efficacy (beta = .271, p < .001), descriptive norm (beta = .172, p < .001) and barriers (beta = -.169, p < .01). Social-cognitive variables accounted for 52% (p < .001) of the variance in physical active behaviour (being physical active for 60 minutes every day). The intention to engage in physical activity (beta = .469, p < .001) and self-efficacy (beta = .243, p < .001) were, in turn, important correlates of physical active behavior.In addition to the prediction of intention to engage in physical activity and physical active behavior, we explored the impact of the intensity of physical activity. The intensity of physical activity was only significantly related to physical active behavior (beta = .253, p < .01, R2 = .06, p < .001). An important goal of our study was to

  15. Family size, the physical environment, and socioeconomic effects across the stature distribution.

    Carson, Scott Alan

    2012-04-01

    A neglected area in historical stature studies is the relationship between stature and family size. Using robust statistics and a large 19th century data set, this study documents a positive relationship between stature and family size across the stature distribution. The relationship between material inequality and health is the subject of considerable debate, and there was a positive relationship between stature and wealth and an inverse relationship between stature and material inequality. After controlling for family size and wealth variables, the paper reports a positive relationship between the physical environment and stature. Copyright © 2012 Elsevier GmbH. All rights reserved.

  16. Polydisperse-particle-size-distribution function determined from intensity profile of angularly scattered light

    Alger, T.W.

    1979-01-01

    A new method for determining the particle-size-distribution function of a polydispersion of spherical particles is presented. The inversion technique for the particle-size-distribution function is based upon matching the measured intensity profile of angularly scattered light with a summation of the intensity contributions of a series of appropriately spaced, narrowband, size-distribution functions. A numerical optimization technique is used to determine the strengths of the individual bands that yield the best agreement with the measured scattered-light-intensity profile. Because Mie theory is used, the method is applicable to spherical particles of all sizes. Several numerical examples demonstrate the application of this inversion method

  17. Determination of Size Distributions in Nanocrystalline Powders by TEM, XRD and SAXS

    Jensen, Henrik; Pedersen, Jørgen Houe; Jørgensen, Jens Erik

    2006-01-01

    Crystallite size distributions and particle size distributions were determined by TEM, XRD, and SAXS for three commercially available TiO2 samples and one homemade. The theoretical Guinier Model was fitted to the experimental data and compared to analytical expressions. Modeling of the XRD spectra...... the size distribution obtained from the XRD experiments; however, a good agreement was obtained between the two techniques. Electron microscopy, SEM and TEM, confirmed the primary particle sizes, the size distributions, and the shapes obtained by XRD and SAXS. The SSEC78 powder and the commercially...

  18. Determinants of Teachers' Intentions To Teach Physically Active Physical Education Classes.

    Martin, Jeffrey J.; Kulinna, Pamela Hodges; Eklund, Robert C.; Reed, Brett

    2001-01-01

    Investigated elementary and secondary teachers' intentions to teach physically active physical education classes, examining a model hypothesizing that teachers' intentions were determined by subjective norm, attitude, perceived behavioral control, and self-efficacy. Teacher surveys supported the theories of reasoned action and planned behavior.…

  19. Test of methods for retrospective activity size distribution determination from filter samples

    Meisenberg, Oliver; Tschiersch, Jochen

    2015-01-01

    Determining the activity size distribution of radioactive aerosol particles requires sophisticated and heavy equipment, which makes measurements at large number of sites difficult and expensive. Therefore three methods for a retrospective determination of size distributions from aerosol filter samples in the laboratory were tested for their applicability. Extraction into a carrier liquid with subsequent nebulisation showed size distributions with a slight but correctable bias towards larger diameters compared with the original size distribution. Yields in the order of magnitude of 1% could be achieved. Sonication-assisted extraction into a carrier liquid caused a coagulation mode to appear in the size distribution. Sonication-assisted extraction into the air did not show acceptable results due to small yields. The method of extraction into a carrier liquid without sonication was applied to aerosol samples from Chernobyl in order to calculate inhalation dose coefficients for 137 Cs based on the individual size distribution. The effective dose coefficient is about half of that calculated with a default reference size distribution. - Highlights: • Activity size distributions can be recovered after aerosol sampling on filters. • Extraction into a carrier liquid and subsequent nebulisation is appropriate. • This facilitates the determination of activity size distributions for individuals. • Size distributions from this method can be used for individual dose coefficients. • Dose coefficients were calculated for the workers at the new Chernobyl shelter

  20. Determination of size distribution of small DNA fragments by polyacrylamide gel electrophoresis

    Lau How Mooi

    1998-01-01

    Size distribution determination of DNA fragments can be normally determined by the agarose gel electrophoresis, including the normal DNA banding pattern analysis. However this method is only good for large DNA, such as the DNA of the size of kilo base pairs to mega base pairs range. DNA of size less than kilo base pairs is difficult to be quantified by the agarose gel method. Polyacrylamide gel electrophoresis however can be used to measure the quantity of DNA fragments of size less than kilo base pairs in length, down to less than ten base pairs. This method is good for determining the quantity of the smaller size DNA, single stranded polymers or even some proteins, if the known standards are available. In this report detail description of the method of preparing the polyacrylamide gel, and the experimental set up is discussed. Possible uses of this method, and the comparison with the standard sizes of DNA is also shown. This method is used to determine the distribution of the amount of the fragmented DNA after the Calf-thymus DNA has been exposed to various types of radiation and of different doses. The standards were used to determine the sizes of the fragmented Calf-thymus DNA. The higher the dose the higher is the amount of the smaller size DNA measured

  1. Physical Selectivity of Molecularly Imprinted polymers evaluated through free volume size distributions derived from Positron Lifetime Spectroscopy

    Pasang, T.; Ranganathaiah, C.

    2015-06-01

    The technique of imprinting molecules of various sizes in a stable structure of polymer matrix has derived multitudes of applications. Once the template molecule is extracted from the polymer matrix, it leaves behind a cavity which is physically (size and shape) and chemically (functional binding site) compatible to the particular template molecule. Positron Annihilation Lifetime Spectroscopy (PALS) is a well known technique to measure cavity sizes precisely in the nanoscale and is not being used in the field of MIPs effectively. This method is capable of measuring nanopores and hence suitable to understand the physical selectivity of the MIPs better. With this idea in mind, we have prepared molecular imprinted polymers (MIPs) with methacrylicacid (MAA) as monomer and EGDMA as cross linker in different molar ratio for three different size template molecules, viz. 4-Chlorophenol (4CP)(2.29 Å), 2-Nephthol (2NP) (3.36 Å) and Phenolphthalein (PP) (4.47Å). FTIR and the dye chemical reactions are used to confirm the complete extraction of the template molecules from the polymer matrix. The free volume size and its distribution have been derived from the measured o-Ps lifetime spectra. Based on the free volume distribution analysis, the percentage of functional cavities for the three template molecules are determined. Percentage of functional binding cavities for 4-CP molecules has been found out to be 70.2% and the rest are native cavities. Similarly for 2NP it is 81.5% and nearly 100% for PP. Therefore, PALS method proves to be very precise and accurate for determining the physical selectivity of MIPs.

  2. Physical Activity And Dietary Fat As Determinants Of Body Mass ...

    Overweight/obesity and related disease conditions will constitute a major threat to the economically productive adults and subsequently, will present a huge health-care burden on developing countries in the near future. Suspected determinants include physical activity and dietary fat. The main indicator of ...

  3. Determinants of Profitability of Food Industry in India: A Size-Wise Analysis

    Ramachandran Azhagaiah

    2012-01-01

    Full Text Available Profitability is the profit earning capacity, which is a crucial factorin contributing to the survival of firms. This paper is a maidenattempt at estimating the impact of size on profitability, consideringthe ‘size’ as the control variable. For this purpose, the selectedfirms are classified into three size categories as ‘small,’ ‘medium,’and ‘large’ based on the sales turnover. The results show that volatilityand growth are the major predictors in determining profitabilityin case of small size firms while growth is important in determiningthe profitability of medium size firms. Capital intensityhas a significant positive coefficient with the profitability of largesize firms. The overall result shows that the larger the size of thefirm, the more the investment in long lived assets has helped toincrease the profitability of the firm unlike the trend in cases ofsmall size and medium size firms.

  4. Determination of size and shape distributions of metal and ceramic powders

    Jovanovic, DI.

    1961-01-01

    For testing the size and shape distributions of metal and ceramic uranium oxide powders the following method for analysing the grain size of powders were developed and implemented: microscopic analysis and sedimentation method. A gravimetry absorption device was constructed for determining the specific surfaces of powders

  5. A simple technique to determine the size distribution of nuclear crater fallback and ejecta

    Anderson, II, Brooks D [U.S. Army Engineer Nuclear Cratering Group, Lawrence Radiation Laboratory, Livermore, CA (United States)

    1970-05-15

    This report describes the results of an investigation to find an economic method for determining the block size distribution of nuclear crater fallback and ejecta. It is shown that the modal analysis method of determining relative proportions can be applied with the use of a special sampling technique, to provide a size distribution curve for clastic materials similar to one obtainable by sieving and weighing the same materials.

  6. A simple technique to determine the size distribution of nuclear crater fallback and ejecta

    Anderson, Brooks D. II

    1970-01-01

    This report describes the results of an investigation to find an economic method for determining the block size distribution of nuclear crater fallback and ejecta. It is shown that the modal analysis method of determining relative proportions can be applied with the use of a special sampling technique, to provide a size distribution curve for clastic materials similar to one obtainable by sieving and weighing the same materials

  7. Determining the size of nanoparticles in the example of magnetic iron oxide core-shell systems

    Jarzębski, Maciej; Kościński, Mikołaj; Białopiotrowicz, Tomasz

    2017-08-01

    The size of nanoparticles is one of the most important factors for their possible applications. Various techniques for the nanoparticle size characterization are available. In this paper selected techniques will be considered base on the prepared core-shell magnetite nanoparticles. Magnetite is one of the most investigated and developed magnetic material. It shows interesting magnetic properties which can be used for biomedical applications, such as drug delivery, hypothermia and also as a contrast agent. To reduce the toxic effects of Fe3O4, magnetic core was covered by dextran and gelatin. Moreover, the shell was doped by fluorescent dye for confocal microscopy investigation. The main investigation focused on the methods for particles size determination of modified magnetite nanoparticles prepared with different techniques. The size distribution were obtained by nanoparticle tracking analysis, dynamic light scattering and transmission electron microscopy. Furthermore, fluorescent correlation spectroscopy (FCS) and confocal microscopy were used to compare the results for particle size determination of core-shell systems.

  8. Active liquid-like behavior of nucleoli determines their size and shape in Xenopus laevis oocytes.

    Brangwynne, Clifford P; Mitchison, Timothy J; Hyman, Anthony A

    2011-03-15

    For most intracellular structures with larger than molecular dimensions, little is known about the connection between underlying molecular activities and higher order organization such as size and shape. Here, we show that both the size and shape of the amphibian oocyte nucleolus ultimately arise because nucleoli behave as liquid-like droplets of RNA and protein, exhibiting characteristic viscous fluid dynamics even on timescales of Nucleoli exhibit a broad distribution of sizes with a characteristic power law, which we show is a consequence of spontaneous coalescence events. These results have implications for the function of nucleoli in ribosome subunit processing and provide a physical link between activity within a macromolecular assembly and its physical properties on larger length scales.

  9. Determination of the particle size distribution of aerosols by means of a diffusion battery

    Maigne, J.P.

    1978-09-01

    The different methods allowing to determine the particle size distribution of aerosols by means of diffusion batteries are described. To that purpose, a new method for the processing of experimental data (percentages of particles trapped by the battery vs flow rate) was developed on the basis of calculation principles which are described and assessed. This method was first tested by numerical simulation from a priori particle size distributions and then verified experimentally using a fine uranine aerosol whose particle size distribution as determined by our method was compared with the distribution previously obtained by electron microscopy. The method can be applied to the determination of particle size distribution spectra of fine aerosols produced by 'radiolysis' of atmospheric gaseous impurities. Two other applications concern the detection threshold of the condensation nuclei counter and the 'critical' radii of 'radiolysis' particles [fr

  10. A Heuristic Approach for Determining Lot Sizes and Schedules Using Power-of-Two Policy

    Esra Ekinci

    2007-01-01

    Full Text Available We consider the problem of determining realistic and easy-to-schedule lot sizes in a multiproduct, multistage manufacturing environment. We concentrate on a specific type of production, namely, flow shop type production. The model developed consists of two parts, lot sizing problem and scheduling problem. In lot sizing problem, we employ binary integer programming and determine reorder intervals for each product using power-of-two policy. In the second part, using the results obtained of the lot sizing problem, we employ mixed integer programming to determine schedules for a multiproduct, multistage case with multiple machines in each stage. Finally, we provide a numerical example and compare the results with similar methods found in practice.

  11. Sample size determination for logistic regression on a logit-normal distribution.

    Kim, Seongho; Heath, Elisabeth; Heilbrun, Lance

    2017-06-01

    Although the sample size for simple logistic regression can be readily determined using currently available methods, the sample size calculation for multiple logistic regression requires some additional information, such as the coefficient of determination ([Formula: see text]) of a covariate of interest with other covariates, which is often unavailable in practice. The response variable of logistic regression follows a logit-normal distribution which can be generated from a logistic transformation of a normal distribution. Using this property of logistic regression, we propose new methods of determining the sample size for simple and multiple logistic regressions using a normal transformation of outcome measures. Simulation studies and a motivating example show several advantages of the proposed methods over the existing methods: (i) no need for [Formula: see text] for multiple logistic regression, (ii) available interim or group-sequential designs, and (iii) much smaller required sample size.

  12. External Determinants of the Development of Small and Medium-Sized Enterprises – Empirical Analysis

    Renata Lisowska

    2015-01-01

    Full Text Available The paper aims to identify external determinants of the development of small and medium-sized enterprises and assess their impact on the functioning of these entities in Poland. Meeting this objective required: identifying determinants of the development of SMEs, determining the current development situation of the surveyed enterprises and examining the impact of external determinants on the development of SMEs. The implementation of the above-presented goals was based on the following assumptions: (i the current situation of the surveyed enterprises is determined with the use of quantitative indicators (turnover volume, number of employees, market share, profit levels (ii the analysis of external determinants encompasses three components of the environment: the macro-environment, the meso-environment and the micro-environment, (iii in each analysed area there are separate analyses conducted for micro, small and medium-sized enterprises, enabling greater precision in the identification of external determinants of development for each category of businesses.

  13. The role of micro size computing clusters for small physics groups

    Shevel, A Y

    2014-01-01

    A small physics group (3-15 persons) might use a number of computing facilities for the analysis/simulation, developing/testing, teaching. It is discussed different types of computing facilities: collaboration computing facilities, group local computing cluster (including colocation), cloud computing. The author discuss the growing variety of different computing options for small groups and does emphasize the role of the group owned computing cluster of micro size.

  14. Influence of particle size and preparation methods on the physical and chemical stability of amorphous simvastatin

    Zhang, Fang; Aaltonen, Jaakko; Tian, Fang

    2009-01-01

    This study investigated the factors influencing the stability of amorphous simvastatin. Quench-cooled amorphous simvastatin in two particle size ranges, 150-180 microm (QC-big) and ... compared to the crystalline form. The rank of solubility was found to be QC-big=QC-small>CM>crystalline. For the physical stability, the highest crystallization rate was observed for CM, and the slowest rate was detected for QC-big, with an intermediate rate occurring for QC-small. QC exhibited lower...

  15. Perception while watching movies: Effects of physical screen size and scene type.

    Troscianko, Tom; Meese, Timothy S; Hinde, Stephen

    2012-01-01

    Over the last decade, television screens and display monitors have increased in size considerably, but has this improved our televisual experience? Our working hypothesis was that the audiences adopt a general strategy that "bigger is better." However, as our visual perceptions do not tap directly into basic retinal image properties such as retinal image size (C. A. Burbeck, 1987), we wondered whether object size itself might be an important factor. To test this, we needed a task that would tap into the subjective experiences of participants watching a movie on different-sized displays with the same retinal subtense. Our participants used a line bisection task to self-report their level of "presence" (i.e., their involvement with the movie) at several target locations that were probed in a 45-min section of the movie "The Good, The Bad, and The Ugly." Measures of pupil dilation and reaction time to the probes were also obtained. In Experiment 1, we found that subjective ratings of presence increased with physical screen size, supporting our hypothesis. Face scenes also produced higher presence scores than landscape scenes for both screen sizes. In Experiment 2, reaction time and pupil dilation results showed the same trends as the presence ratings and pupil dilation correlated with presence ratings, providing some validation of the method. Overall, the results suggest that real-time measures of subjective presence might be a valuable tool for measuring audience experience for different types of (i) display and (ii) audiovisual material.

  16. Nuclear Criticality Calculation for Determining the Bach Size in a Pyroprocessing Facility

    Ko, Won Il; Lee, Ho Hee; Chang, Hong Rae; Song, Dae Yong; Kwon, Eun Ha; Jung, Chang Jun; Yoon, Suk Kyun

    2009-01-01

    The criticality analysis in a pyroprocessing facility is very important element for the R and D and the facility design in terms of the determination of batch size of the sub-processes as well as facility safety. Particularly, the determining the batch size is essential at the beginning stage of the R and D. In this report, the criticality analysis was carried out for the subprocesses such as voloxidation, electrolytic reduction, electrorefining and electrowinning process in order to estimate the maximum batch size of each process by using Monte Carlo code (MCNP4/C2). On the whole, the criticality problem could not give a big effect on the batch sizes in the voloxidation, electrolytic reduction and electrorefining. However, it was resulted that permissible amount of nuclear material to prevent the criticality accident in the electrowinning process was about 10kgHM

  17. Size Determination of Au Aerosol Nanoparticles by Off-Line TEM/STEM Observations

    Karlsson, Lisa S.; Deppert, Knut; Malm, Jan-Olle

    2006-12-01

    Determination of particle size distributions of Au aerosol nanoparticles has been performed by a TEM/STEM investigation. The particles are generated by an evaporation/condensation method and are size-selected by differential mobility analyzers (DMA) based on their electrical mobility. Off-line TEM measurements resulted in equivalent projected area diameters assuming that the particles are spherical in shape. In this paper critical factors such as magnification calibration, sampling, image analysis, beam exposure and, particle shape are treated. The study shows that the measures of central tendency; mean, median and mode, are equal as expected from a narrow size distribution. Moreover, the correlation between TEM/STEM and DMA are good, in practice 1:1. Also, STEM has the advantage over TEM due to enhanced contrast and is proposed as an alternative route for determination of particle size distributions of nanoparticles with lower contrast.

  18. Size Determination of Au Aerosol Nanoparticles by Off-Line TEM/STEM Observations

    Karlsson, Lisa S.; Deppert, Knut; Malm, Jan-Olle

    2006-01-01

    Determination of particle size distributions of Au aerosol nanoparticles has been performed by a TEM/STEM investigation. The particles are generated by an evaporation/condensation method and are size-selected by differential mobility analyzers (DMA) based on their electrical mobility. Off-line TEM measurements resulted in equivalent projected area diameters assuming that the particles are spherical in shape. In this paper critical factors such as magnification calibration, sampling, image analysis, beam exposure and, particle shape are treated. The study shows that the measures of central tendency; mean, median and mode, are equal as expected from a narrow size distribution. Moreover, the correlation between TEM/STEM and DMA are good, in practice 1:1. Also, STEM has the advantage over TEM due to enhanced contrast and is proposed as an alternative route for determination of particle size distributions of nanoparticles with lower contrast

  19. Nuclear Criticality Calculation for Determining the Bach Size in a Pyroprocessing Facility

    Ko, Won Il; Lee, Ho Hee; Chang, Hong Rae; Song, Dae Yong; Kwon, Eun Ha; Jung, Chang Jun; Yoon, Suk Kyun [KAERI, Daejeon (Korea, Republic of)

    2009-01-15

    The criticality analysis in a pyroprocessing facility is very important element for the R and D and the facility design in terms of the determination of batch size of the sub-processes as well as facility safety. Particularly, the determining the batch size is essential at the beginning stage of the R and D. In this report, the criticality analysis was carried out for the subprocesses such as voloxidation, electrolytic reduction, electrorefining and electrowinning process in order to estimate the maximum batch size of each process by using Monte Carlo code (MCNP4/C2). On the whole, the criticality problem could not give a big effect on the batch sizes in the voloxidation, electrolytic reduction and electrorefining. However, it was resulted that permissible amount of nuclear material to prevent the criticality accident in the electrowinning process was about 10kgHM

  20. Lipoplex size is a major determinant of in vitro lipofection efficiency.

    Ross, P C; Hui, S W

    1999-04-01

    The inhibition effect of serum on the transfection efficiency of cationic liposome-DNA complexes (lipoplexes) is a major obstacle to the application of this gene delivery vector both in vitro and in vivo. The size of the lipoplexes, as they are presented to targeted cells, is found to be the major determinant of their effectiveness in transfection. The transfection efficiency and the cell association and uptake of lipoplexes with CHO cells was found to increase with increasing lipoplex size. The influence on the transfection efficiency of lipoplexes by their cationic lipid:DNA ratios, types of liposomes, incubation time in polyanion containing media, and time of serum addition, are mediated mainly through size. Lipoplexes at a 2:1 charge ratio grow in size in media containing polyanions. The size growth may be arrested by adding serum to the incubation media. By using large lipoplexes, especially those made from multilamellar vesicles, the serum inhibition effect may be overcome.

  1. Determinants of Urban Poverty: The Case of Medium Sized City in Pakistan

    Masood Sarwar Awan; Nasir Iqbal

    2010-01-01

    Urban poverty, which is distinct from rural poverty due to demographic, economic and political aspects remain hitherto unexplored, at the city level in Pakistan. We have examined the determinants of urban poverty in Sargodha, a medium-size city of Pakistan. The analysis is based on the survey of 330 households. Results suggest that employment in public sector, investment in human capital and access to public amenities reduce poverty while employment in informal sector, greater household size ...

  2. Size and number of DNA molecules from Chinese hamster ovary cells determined by molecular autoradiography

    Todd, M.B.

    1980-06-01

    A new method for visualization of separable subunits of DNA is described. Autoradiography of tritium-labeled DNA from one or a few nuclei, lysed with detergent, moderate salt, and proteases, and gently deposited on a filter, allows determination of subunit molecular weight, size distribution, number per nucleus, and organization. The shape of the size distribution of CHO subunit images is similar to that of CHO mitotic chromosomes, and the numbers of subunits per nucleus supports a model of eight subunits per chromosome

  3. Carpel size, grain filling, and morphology determine individual grain weight in wheat

    Xie, Quan; Mayes, Sean; Sparkes, Debbie L.

    2015-01-01

    Individual grain weight is a major yield component in wheat. To provide a comprehensive understanding of grain weight determination, the carpel size at anthesis, grain dry matter accumulation, grain water uptake and loss, grain morphological expansion, and final grain weight at different positions within spikelets were investigated in a recombinant inbred line mapping population of bread wheat (Triticum aestivum L.)?spelt (Triticum spelta L.). Carpel size, grain dry matter and water accumulat...

  4. Preliminary study of determination of UO2 grain size using X-ray diffraction method

    Mulyana, T.; Sambodo, G. D.; Juanda, D.; Fatchatul, B.

    1998-01-01

    The determination of UO 2 grain size has accomplished using x-ray diffraction method. The UO 2 powder is obtained from sol-gel process. A copper target as radiation source in the x-ray diffractometer was used in this experiment with CμKα characteristic wavelength 1.54433 Angstrom. The result indicate that the UO 2 mean grain size on presintered (temperature 800 o C) has the value 456.8500 Angstrom and the UO 2 mean grain size on sintered (temperature 1700 o C) has value 651.4934 Angstrom

  5. The Sex Determination Gene transformer Regulates Male-Female Differences in Drosophila Body Size.

    Rideout, Elizabeth J; Narsaiya, Marcus S; Grewal, Savraj S

    2015-12-01

    Almost all animals show sex differences in body size. For example, in Drosophila, females are larger than males. Although Drosophila is widely used as a model to study growth, the mechanisms underlying this male-female difference in size remain unclear. Here, we describe a novel role for the sex determination gene transformer (tra) in promoting female body growth. Normally, Tra is expressed only in females. We find that loss of Tra in female larvae decreases body size, while ectopic Tra expression in males increases body size. Although we find that Tra exerts autonomous effects on cell size, we also discovered that Tra expression in the fat body augments female body size in a non cell-autonomous manner. These effects of Tra do not require its only known targets doublesex and fruitless. Instead, Tra expression in the female fat body promotes growth by stimulating the secretion of insulin-like peptides from insulin producing cells in the brain. Our data suggest a model of sex-specific growth in which body size is regulated by a previously unrecognized branch of the sex determination pathway, and identify Tra as a novel link between sex and the conserved insulin signaling pathway.

  6. The Sex Determination Gene transformer Regulates Male-Female Differences in Drosophila Body Size.

    Elizabeth J Rideout

    2015-12-01

    Full Text Available Almost all animals show sex differences in body size. For example, in Drosophila, females are larger than males. Although Drosophila is widely used as a model to study growth, the mechanisms underlying this male-female difference in size remain unclear. Here, we describe a novel role for the sex determination gene transformer (tra in promoting female body growth. Normally, Tra is expressed only in females. We find that loss of Tra in female larvae decreases body size, while ectopic Tra expression in males increases body size. Although we find that Tra exerts autonomous effects on cell size, we also discovered that Tra expression in the fat body augments female body size in a non cell-autonomous manner. These effects of Tra do not require its only known targets doublesex and fruitless. Instead, Tra expression in the female fat body promotes growth by stimulating the secretion of insulin-like peptides from insulin producing cells in the brain. Our data suggest a model of sex-specific growth in which body size is regulated by a previously unrecognized branch of the sex determination pathway, and identify Tra as a novel link between sex and the conserved insulin signaling pathway.

  7. Gridsampler – A Simulation Tool to Determine the Required Sample Size for Repertory Grid Studies

    Mark Heckmann

    2017-01-01

    Full Text Available The repertory grid is a psychological data collection technique that is used to elicit qualitative data in the form of attributes as well as quantitative ratings. A common approach for evaluating multiple repertory grid data is sorting the elicited bipolar attributes (so called constructs into mutually exclusive categories by means of content analysis. An important question when planning this type of study is determining the sample size needed to a discover all attribute categories relevant to the field and b yield a predefined minimal number of attributes per category. For most applied researchers who collect multiple repertory grid data, programming a numeric simulation to answer these questions is not feasible. The gridsampler software facilitates determining the required sample size by providing a GUI for conducting the necessary numerical simulations. Researchers can supply a set of parameters suitable for the specific research situation, determine the required sample size, and easily explore the effects of changes in the parameter set.

  8. Algorithm of Data Reduce in Determination of Aerosol Particle Size Distribution at Damps/C

    Muhammad-Priyatna; Otto-Pribadi-Ruslanto

    2001-01-01

    The analysis had to do for algorithm of data reduction on Damps/C (Differential Mobility Particle Sizer with Condensation Particle Counter) system, this is for determine aerosol particle size distribution with range 0,01 μm to 1 μm in diameter. Damps/C (Differential Mobility Particle Sizer with Condensation Particle Counter) system contents are software and hardware. The hardware used determine of mobilities of aerosol particle and so the software used determine aerosol particle size distribution in diameter. The mobilities and diameter particle had connection in the electricity field. That is basic program for reduction of data and particle size conversion from particle mobility become particle diameter. The analysis to get transfer function value, Ω, is 0.5. The data reduction program to do conversation mobility basis become diameter basis with number efficiency correction, transfer function value, and poly charge particle. (author)

  9. Comparison of photon correlation spectroscopy with photosedimentation analysis for the determination of aqueous colloid size distributions

    Rees, Terry F.

    1990-01-01

    Colloidal materials, dispersed phases with dimensions between 0.001 and 1 μm, are potential transport media for a variety of contaminants in surface and ground water. Characterization of these colloids, and identification of the parameters that control their movement, are necessary before transport simulations can be attempted. Two techniques that can be used to determine the particle-size distribution of colloidal materials suspended in natural waters are compared. Photon correlation Spectroscopy (PCS) utilizes the Doppler frequency shift of photons scattered off particles undergoing Brownian motion to determine the size of colloids suspended in water. Photosedimentation analysis (PSA) measures the time-dependent change in optical density of a suspension of colloidal particles undergoing centrifugation. A description of both techniques, important underlying assumptions, and limitations are given. Results for a series of river water samples show that the colloid-size distribution means are statistically identical as determined by both techniques. This also is true of the mass median diameter (MMD), even though MMD values determined by PSA are consistently smaller than those determined by PCS. Because of this small negative bias, the skew parameters for the distributions are generally smaller for the PCS-determined distributions than for the PSA-determined distributions. Smaller polydispersity indices for the distributions are also determined by PCS.

  10. Determination of the lateral size and thickness of solution-processed graphene flakes

    Lin, Li-Shang; Bin-Tay, Wei; Aslam, Zabeada; Westwood, A. V. K.; Brydson, R.

    2017-09-01

    We present a method to determine the lateral size distribution of solution…processed graphene via direct image analysis techniques. Initially transmission electron microscopy (TEM) and optical microscopy (OM) were correlated and used to provide a reliable benchmark. A rapid, automated OM method was then developed to obtain the distribution from thousands of flakes, avoiding statistical uncertainties and providing high accuracy. Dynamic light scattering (DLS) was further employed to develop an in-situ method to derive the number particle size distribution (PSD) for a dispersion, with a deviation lower than 22% in the sub-micron regime. Methods for determining flake thickness are also discussed.

  11. Bayesian sample size determination for cost-effectiveness studies with censored data.

    Daniel P Beavers

    Full Text Available Cost-effectiveness models are commonly utilized to determine the combined clinical and economic impact of one treatment compared to another. However, most methods for sample size determination of cost-effectiveness studies assume fully observed costs and effectiveness outcomes, which presents challenges for survival-based studies in which censoring exists. We propose a Bayesian method for the design and analysis of cost-effectiveness data in which costs and effectiveness may be censored, and the sample size is approximated for both power and assurance. We explore two parametric models and demonstrate the flexibility of the approach to accommodate a variety of modifications to study assumptions.

  12. Pore Size Distribution in Chicken Eggs as Determined by Mercury Porosimetry

    La Scala Jr N

    2000-01-01

    Full Text Available In this study we investigated the application of mercury porosimetry technique into the determination of porosity features in 28 week old hen eggshells. Our results have shown that the majority of the pores have sizes between 1 to 10 mu m in the eggshells studied. By applying mercury porosimetry technique we were able to describe the porosity features better, by determining a pore size distribution in the eggshells. Here, we introduce mercury porosimetry technique as a new routine technique applied into the study of eggshells.

  13. An alternative method for determining particle-size distribution of forest road aggregate and soil with large-sized particles

    Hakjun Rhee; Randy B. Foltz; James L. Fridley; Finn Krogstad; Deborah S. Page-Dumroese

    2014-01-01

    Measurement of particle-size distribution (PSD) of soil with large-sized particles (e.g., 25.4 mm diameter) requires a large sample and numerous particle-size analyses (PSAs). A new method is needed that would reduce time, effort, and cost for PSAs of the soil and aggregate material with large-sized particles. We evaluated a nested method for sampling and PSA by...

  14. Built Environment Influences of Children’s Physical Activity: Examining Differences by Neighbourhood Size and Sex

    Christine A. Mitchell

    2016-01-01

    Full Text Available Neighbourhoods can facilitate or constrain moderate-to-vigorous physical activity (MVPA among children by providing or restricting opportunities for MVPA. However, there is no consensus on how to define a child’s neighbourhood. This study examines the influence of the neighbourhood built environment on objectively measured MVPA among 435 children (aged 9–14 years in London (ON, Canada. As there is no consensus on how to delineate a child’s neighbourhood, a geographic information system was used to generate measures of the neighbourhood built environment at two buffer sizes (500 m and 800 m around each child’s home. Linear regression models with robust standard errors (cluster were used to analyze the relationship between built environment characteristics and average daily MVPA during non-school hours on weekdays. Sex-stratified models assessed sex-specific relationships. When accounting for individual and neighbourhood socio-demographic variables, park space and multi-use path space were found to influence children’s MVPA. Sex-stratified models found significant associations between MVPA and park space, with the 800 m buffer best explaining boys’ MVPA and the 500 m buffer best explaining girls’ MVPA. Findings emphasize that, when designing built environments, programs, and policies to facilitate physical activity, it is important to consider that the size of the neighbourhood influencing a child’s physical activity may differ according to sex.

  15. Phylogeny determines flower size-dependent sex allocation at flowering in a hermaphroditic family.

    Teixido, A L; Guzmán, B; Staggemeier, V G; Valladares, F

    2017-11-01

    In animal-pollinated hermaphroditic plants, optimal floral allocation determines relative investment into sexes, which is ultimately dependent on flower size. Larger flowers disproportionally increase maleness whereas smaller and less rewarding flowers favour female function. Although floral traits are considered strongly conserved, phylogenetic relationships in the interspecific patterns of resource allocation to floral sex remain overlooked. We investigated these patterns in Cistaceae, a hermaphroditic family. We reconstructed phylogenetic relationships among Cistaceae species and quantified phylogenetic signal for flower size, dry mass and nutrient allocation to floral structures in 23 Mediterranean species using Blomberg's K-statistic. Lastly, phylogenetically-controlled correlational and regression analyses were applied to examine flower size-based allometry in resource allocation to floral structures. Sepals received the highest dry mass allocation, followed by petals, whereas sexual structures increased nutrient allocation. Flower size and resource allocation to floral structures, except for carpels, showed a strong phylogenetic signal. Larger-flowered species allometrically allocated more resources to maleness, by increasing allocation to corollas and stamens. Our results suggest a major role of phylogeny in determining interspecific changes in flower size and subsequent floral sex allocation. This implies that flower size balances the male-female function over the evolutionary history of Cistaceae. While allometric resource investment in maleness is inherited across species diversification, allocation to the female function seems a labile trait that varies among closely related species that have diversified into different ecological niches. © 2017 German Botanical Society and The Royal Botanical Society of the Netherlands.

  16. Determining physical constraints in transcriptional initiationcomplexes using DNA sequence analysis

    Shultzaberger, Ryan K.; Chiang, Derek Y.; Moses, Alan M.; Eisen,Michael B.

    2007-07-01

    Eukaryotic gene expression is often under the control ofcooperatively acting transcription factors whose binding is limited bystructural constraints. By determining these structural constraints, wecan understand the "rules" that define functional cooperativity.Conversely, by understanding the rules of binding, we can inferstructural characteristics. We have developed an information theory basedmethod for approximating the physical limitations of cooperativeinteractions by comparing sequence analysis to microarray expressiondata. When applied to the coordinated binding of the sulfur amino acidregulatory protein Met4 by Cbf1 and Met31, we were able to create acombinatorial model that can correctly identify Met4 regulatedgenes.

  17. The effect of joystick handle size and gain at two levels of required precision on performance and physical load on crane operators

    Huysmans, M.A.; Looze, M.P. de; Hoozemans, M.J.M.; Beek, A.J. van der; Dieën, J.H. van

    2006-01-01

    The study was designed to determine the effect of joystick handle size and (display-control) gain at two levels of required task precision on performance and physical load on crane operators. Eight experienced crane operators performed a simulated crane operation task on a computer by use of a

  18. In situ droplet size and speed determination in a fluid-bed granulator.

    Ehlers, Henrik; Larjo, Jussi; Antikainen, Osmo; Räikkönen, Heikki; Heinämäki, Jyrki; Yliruusi, Jouko

    2010-05-31

    The droplet size affects the final product in fluid-bed granulation and coating. In the present study, spray characteristics of aqueous granulation liquid (purified water) were determined in situ in a fluid-bed granulator. Droplets were produced by a pneumatic nozzle. Diode laser stroboscopy (DLS) was used for droplet detection and particle tracking velocimetry (PTV) was used for determination of droplet size and speed. Increased atomization pressure decreased the droplet size and the effect was most strongly visible in the 90% size fractile. The droplets seemed to undergo coalescence after which only slight evaporation occurred. Furthermore, the droplets were subjected to a strong turbulence at the event of atomization, after which the turbulence reached a minimum value in the lower halve of the chamber. The turbulence increased as speed and droplet size decreased due to the effects of the fluidizing air. The DLS and PTV system used was found to be a useful and rapid tool in determining spray characteristics and in monitoring and predicting nozzle performance. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  19. Aggregate size and structure determination of nanomaterials in physiological media: importance of dynamic evolution

    Afrooz, A. R. M. Nabiul; Hussain, Saber M.; Saleh, Navid B.

    2014-12-01

    Most in vitro nanotoxicological assays are performed after 24 h exposure. However, in determining size and shape effect of nanoparticles in toxicity assays, initial characterization data are generally used to describe experimental outcome. The dynamic size and structure of aggregates are typically ignored in these studies. This brief communication reports dynamic evolution of aggregation characteristics of gold nanoparticles. The study finds that gradual increase in aggregate size of gold nanospheres (AuNS) occurs up to 6 h duration; beyond this time period, the aggregation process deviates from gradual to a more abrupt behavior as large networks are formed. Results of the study also show that aggregated clusters possess unique structural conformation depending on nominal diameter of the nanoparticles. The differences in fractal dimensions of the AuNS samples likely occurred due to geometric differences, causing larger packing propensities for smaller sized particles. Both such observations can have profound influence on dosimetry for in vitro nanotoxicity analyses.

  20. Determining the effect of grain size and maximum induction upon coercive field of electrical steels

    Landgraf, Fernando José Gomes; da Silveira, João Ricardo Filipini; Rodrigues-Jr., Daniel

    2011-10-01

    Although theoretical models have already been proposed, experimental data is still lacking to quantify the influence of grain size upon coercivity of electrical steels. Some authors consider a linear inverse proportionality, while others suggest a square root inverse proportionality. Results also differ with regard to the slope of the reciprocal of grain size-coercive field relation for a given material. This paper discusses two aspects of the problem: the maximum induction used for determining coercive force and the possible effect of lurking variables such as the grain size distribution breadth and crystallographic texture. Electrical steel sheets containing 0.7% Si, 0.3% Al and 24 ppm C were cold-rolled and annealed in order to produce different grain sizes (ranging from 20 to 150 μm). Coercive field was measured along the rolling direction and found to depend linearly on reciprocal of grain size with a slope of approximately 0.9 (A/m)mm at 1.0 T induction. A general relation for coercive field as a function of grain size and maximum induction was established, yielding an average absolute error below 4%. Through measurement of B50 and image analysis of micrographs, the effects of crystallographic texture and grain size distribution breadth were qualitatively discussed.

  1. Determination of size-specific exposure settings in dental cone-beam CT

    Pauwels, Ruben; Jacobs, Reinhilde; Bogaerts, Ria; Bosmans, Hilde; Panmekiate, Soontra

    2017-01-01

    To estimate the possible reduction of tube output as a function of head size in dental cone-beam computed tomography (CBCT). A 16 cm PMMA phantom, containing a central and six peripheral columns filled with PMMA, was used to represent an average adult male head. The phantom was scanned using CBCT, with 0-6 peripheral columns having been removed in order to simulate varying head sizes. For five kV settings (70-90 kV), the mAs required to reach a predetermined image noise level was determined, and corresponding radiation doses were derived. Results were expressed as a function of head size, age, and gender, based on growth reference charts. The use of 90 kV consistently resulted in the largest relative dose reduction. A potential mAs reduction ranging from 7 % to 50 % was seen for the different simulated head sizes, showing an exponential relation between head size and mAs. An optimized exposure protocol based on head circumference or age/gender is proposed. A considerable dose reduction, through reduction of the mAs rather than the kV, is possible for small-sized patients in CBCT, including children and females. Size-specific exposure protocols should be clinically implemented. (orig.)

  2. Determination of size-specific exposure settings in dental cone-beam CT

    Pauwels, Ruben [Chulalongkorn University, Department of Radiology, Faculty of Dentistry, Patumwan, Bangkok (Thailand); University of Leuven, OMFS-IMPATH Research Group, Department of Imaging and Pathology, Biomedical Sciences Group, Leuven (Belgium); Jacobs, Reinhilde [University of Leuven, OMFS-IMPATH Research Group, Department of Imaging and Pathology, Biomedical Sciences Group, Leuven (Belgium); Bogaerts, Ria [University of Leuven, Laboratory of Experimental Radiotherapy, Department of Oncology, Biomedical Sciences Group, Leuven (Belgium); Bosmans, Hilde [University of Leuven, Medical Physics and Quality Assessment, Department of Imaging and Pathology, Biomedical Sciences Group, Leuven (Belgium); Panmekiate, Soontra [Chulalongkorn University, Department of Radiology, Faculty of Dentistry, Patumwan, Bangkok (Thailand)

    2017-01-15

    To estimate the possible reduction of tube output as a function of head size in dental cone-beam computed tomography (CBCT). A 16 cm PMMA phantom, containing a central and six peripheral columns filled with PMMA, was used to represent an average adult male head. The phantom was scanned using CBCT, with 0-6 peripheral columns having been removed in order to simulate varying head sizes. For five kV settings (70-90 kV), the mAs required to reach a predetermined image noise level was determined, and corresponding radiation doses were derived. Results were expressed as a function of head size, age, and gender, based on growth reference charts. The use of 90 kV consistently resulted in the largest relative dose reduction. A potential mAs reduction ranging from 7 % to 50 % was seen for the different simulated head sizes, showing an exponential relation between head size and mAs. An optimized exposure protocol based on head circumference or age/gender is proposed. A considerable dose reduction, through reduction of the mAs rather than the kV, is possible for small-sized patients in CBCT, including children and females. Size-specific exposure protocols should be clinically implemented. (orig.)

  3. Perception While Watching Movies: Effects of Physical Screen Size and Scene Type

    Tom Troscianko

    2012-08-01

    Full Text Available Over the last decade, television screens and display monitors have increased in size considerably, but has this improved our televisual experience? Our working hypothesis was that the audiences adopt a general strategy that “bigger is better.” However, as our visual perceptions do not tap directly into basic retinal image properties such as retinal image size (C. A. Burbeck, 1987, we wondered whether object size itself might be an important factor. To test this, we needed a task that would tap into the subjective experiences of participants watching a movie on different-sized displays with the same retinal subtense. Our participants used a line bisection task to self-report their level of “presence” (i.e., their involvement with the movie at several target locations that were probed in a 45-min section of the movie “The Good, The Bad, and The Ugly.” Measures of pupil dilation and reaction time to the probes were also obtained. In Experiment 1, we found that subjective ratings of presence increased with physical screen size, supporting our hypothesis. Face scenes also produced higher presence scores than landscape scenes for both screen sizes. In Experiment 2, reaction time and pupil dilation results showed the same trends as the presence ratings and pupil dilation correlated with presence ratings, providing some validation of the method. Overall, the results suggest that real-time measures of subjective presence might be a valuable tool for measuring audience experience for different types of (i display and (ii audiovisual material.

  4. Size and geometry of apical sesamoid fracture fragments as a determinant of prognosis in Thoroughbred racehorses.

    Kamm, J L; Bramlage, L R; Schnabel, L V; Ruggles, A J; Embertson, R M; Hopper, S A

    2011-07-01

    Analysis was performed to examine a method for refining the preoperative prognosis for horses that had surgery to remove apical fractures of the proximal sesamoid bones (PSBs). To determine if: 1) there was a difference in size or configuration of apical fractures between the different anatomical locations of the PSBs, which have been shown to affect the prognosis; and 2) the size or configuration could predict the prognosis for racehorses with these fractures. The study included 110 weanlings and yearlings and 56 training racehorses that underwent surgery to remove apical PSB fractures. Radiographs of the fractures were used for measurement of the abaxial and axial proportion and the abaxial to axial ratio, and race records were used to determine average earnings per start (AEPS) and total post operative starts. Analysis of variance and regression statistics were used to compare the fragment sizes between the specific PSBs on each of the limbs and compare size and configuration of the fractures to prognosis. There was a significantly larger abaxial to axial ratio (more transverse fracture) for the forelimb medial sesamoids than for all other sesamoids in untrained racehorses (P = 0.03). There were no other significant differences in size. There was no relationship between fracture size or configuration and AEPS nor total post operative starts. Apical fractures in weanlings and yearlings tend to be more transverse in the forelimb medial PSBs than the other PSBs. Apical fracture size and geometry does not determine prognosis for apical sesamoid fractures. Horses that undergo surgery to remove larger apical fractures of the PSBs do not have a worse outcome than those horses with smaller fractures. © 2010 EVJ Ltd.

  5. Small-sized cyclotron for studies of physical processes in accelerators

    Arzumanov, A.A.; Voronin, A.M.; Gerasimov, V.I.; Gor'kovets, M.S.; Gromov, D.D.; Zavezionov, V.P.; Kruglov, V.G.

    1979-01-01

    A description is given of a cyclotron intended for studying physical processes taking place in the accelerator central part, for investigating various ion sources and also for optimizing the elements and systems of the U-150M isochronous cyclotron. The accelerator uses a hot-cathode slit ion source. The resonance system constitutes a quarter-wave nonaxial resonator excited at a frequency of 11.2 MHz. Investigations of beam time characteristics showed that the beam axial size constituted 11 mm, its radial size 5 mm. Displacement of the beam with respect to the median plane does not exceed 2 mm. In the cyclotron H + ions have been accelerated to an energy of 1 MeV. The integrated beam current constituted 250 μA

  6. Adsorption of diclofenac and nimesulide on activated carbon: Statistical physics modeling and effect of adsorbate size

    Sellaoui, Lotfi; Mechi, Nesrine; Lima, Éder Cláudio; Dotto, Guilherme Luiz; Ben Lamine, Abdelmottaleb

    2017-10-01

    Based on statistical physics elements, the equilibrium adsorption of diclofenac (DFC) and nimesulide (NM) on activated carbon was analyzed by a multilayer model with saturation. The paper aimed to describe experimentally and theoretically the adsorption process and study the effect of adsorbate size using the model parameters. From numerical simulation, the number of molecules per site showed that the adsorbate molecules (DFC and NM) were mostly anchored in both sides of the pore walls. The receptor sites density increase suggested that additional sites appeared during the process, to participate in DFC and NM adsorption. The description of the adsorption energy behavior indicated that the process was physisorption. Finally, by a model parameters correlation, the size effect of the adsorbate was deduced indicating that the molecule dimension has a negligible effect on the DFC and NM adsorption.

  7. A Moving Optical Fibre Technique for Structure Analysis of Heterogenous Products: Application to the Determination of the Bubble-Size Distribution in Liquid Foams

    Bisperink, C. G. J.; Akkerman, J. C.; Prins, A.; Ronteltap, A. D.

    1992-01-01

    The bubble-size distribution in liquid foams measured as a function of time can be used to distinguish between the physical processes that determine the breakdown of foams. A new method based on an optical fibre technique was developed to measure various foam characteristics e.g. the rate of drainage, the rate of foam collapse, the change in gas fraction, interbubble gas diffusion (disproportionation) and the evolution of the bubble - size distribution during the ageing of the foam. The metho...

  8. Acceptance criteria for determining armed response force size at nuclear power plants

    1983-02-01

    This guidance document contains acceptance criteria to be used in the NRC license review process. It consists of a scored worksheet and guidelines for interpreting the worksheet score that can be used in determining the adequacy of the armed response force size at a nuclear power reactor facility

  9. An approach to determine a critical size for rolling contact fatigue initiating from rail surface defects

    Li, Z.; Zhao, X.; Dollevoet, R.P.B.J.

    2016-01-01

    A methodology for the determination of a critical size of surface defects, above which RCF can initiate, has been developed and demonstrated with its application to the passive type of squats under typical Dutch railway loading conditions. Such a methodology is based on stress evaluation of

  10. Sample sizes to control error estimates in determining soil bulk density in California forest soils

    Youzhi Han; Jianwei Zhang; Kim G. Mattson; Weidong Zhang; Thomas A. Weber

    2016-01-01

    Characterizing forest soil properties with high variability is challenging, sometimes requiring large numbers of soil samples. Soil bulk density is a standard variable needed along with element concentrations to calculate nutrient pools. This study aimed to determine the optimal sample size, the number of observation (n), for predicting the soil bulk density with a...

  11. Age versus size determination of radial variation in wood specific gravity : lessons from eccentrics

    G. Bruce Williamson; Michael C. Wiemann

    2011-01-01

    Radial increases in wood specific gravity have been shown to characterize early successional trees from tropical forests. Here, we develop and apply a novel method to test whether radial increases are determined by tree age or tree size. The method compares the slopes of specific gravity changes across a short radius and a long radius of trees with eccentric trunks. If...

  12. CLSM as quantitative method to determine the size of drug crystals in a solid dispersion

    de Waard, Hans; Hessels, Martin J T; Boon, Maarten; Sjollema, Klaas A; Hinrichs, Wouter L J; Eissens, Anko C; Frijlink, Henderik W

    2011-01-01

    PURPOSE: To test whether confocal laser scanning microscopy (CLSM) can be used as an analytical tool to determine the drug crystal size in a powder mixture or a crystalline solid dispersion. METHODS: Crystals of the autofluorescent drug dipyridamole were incorporated in a matrix of crystalline

  13. 13 CFR 121.401 - What procurement programs are subject to size determinations?

    2010-01-01

    ... program, the Women-Owned Small Business (WOSB) Federal Contract Assistance Procedures, SBA's Service... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What procurement programs are subject to size determinations? 121.401 Section 121.401 Business Credit and Assistance SMALL BUSINESS...

  14. 49 CFR 26.65 - What rules govern business size determinations?

    2010-10-01

    ... (including its affiliates) must be an existing small business, as defined by Small Business Administration... 49 Transportation 1 2010-10-01 2010-10-01 false What rules govern business size determinations? 26... DISADVANTAGED BUSINESS ENTERPRISES IN DEPARTMENT OF TRANSPORTATION FINANCIAL ASSISTANCE PROGRAMS Certification...

  15. Fundamental study on laser manipulation of contamination particles with determining shape, size and species

    Shimizu, Isao; Fujii, Taketsugu

    1995-01-01

    It has been desired to eliminate or collect the contamination particles of radioisotope in each sort of species or shape and size non-invasively. The shape and size of particle can be determined from the shape and distribution of diffraction pattern of particle in the parallel laser beam, the species of particle can be discriminated by the fluorescence from resonance of laser beam, or by the laser Raman scattering, and the particle suspended in the air or falling down in a vacuum can be levitated against the gravity and trapped by the radiation force and the trapping force of the focussed laser beam in the atmosphere or in a vacuum. For the purpose of the non-invasive manipulation of contamination particles, the laser manipulation technique, image processing technique with Multiplexed Matched Spatial Filter and the determination technique of laser Raman scattering or fluorescence from resonance of laser light were combined in the experiments. The shape, size and species of particles trapped in the focal plane of focused Ar laser beam can be determined simultaneously and instantaneously from the shape and intensity distributions of diffraction patterns of the particles in the irradiation of parallel coherent beam of He-Ne laser, and fluorescence from the resonance of YAG laser beam with variable wave length. In this research, a new technique is proposed to manipulate non-invasively the contamination particles determined with the shape, size and species in the atmosphere or in a vacuum, by laser beam. (author)

  16. Computing physical properties with quantum Monte Carlo methods with statistical fluctuations independent of system size.

    Assaraf, Roland

    2014-12-01

    We show that the recently proposed correlated sampling without reweighting procedure extends the locality (asymptotic independence of the system size) of a physical property to the statistical fluctuations of its estimator. This makes the approach potentially vastly more efficient for computing space-localized properties in large systems compared with standard correlated methods. A proof is given for a large collection of noninteracting fragments. Calculations on hydrogen chains suggest that this behavior holds not only for systems displaying short-range correlations, but also for systems with long-range correlations.

  17. Neighborhood size and local geographic variation of health and social determinants

    Emch Michael

    2005-06-01

    Full Text Available Abstract Background Spatial filtering using a geographic information system (GIS is often used to smooth health and ecological data. Smoothing disease data can help us understand local (neighborhood geographic variation and ecological risk of diseases. Analyses that use small neighborhood sizes yield individualistic patterns and large sizes reveal the global structure of data where local variation is obscured. Therefore, choosing an optimal neighborhood size is important for understanding ecological associations with diseases. This paper uses Hartley's test of homogeneity of variance (Fmax as a methodological solution for selecting optimal neighborhood sizes. The data from a study area in Vietnam are used to test the suitability of this method. Results The Hartley's Fmax test was applied to spatial variables for two enteric diseases and two socioeconomic determinants. Various neighbourhood sizes were tested by using a two step process to implement the Fmaxtest. First the variance of each neighborhood was compared to the highest neighborhood variance (upper, Fmax1 and then they were compared with the lowest neighborhood variance (lower, Fmax2. A significant value of Fmax1 indicates that the neighborhood does not reveal the global structure of data, and in contrast, a significant value in Fmax2 implies that the neighborhood data are not individualistic. The neighborhoods that are between the lower and the upper limits are the optimal neighbourhood sizes. Conclusion The results of tests provide different neighbourhood sizes for different variables suggesting that optimal neighbourhood size is data dependent. In ecology, it is well known that observation scales may influence ecological inference. Therefore, selecting optimal neigborhood size is essential for understanding disease ecologies. The optimal neighbourhood selection method that is tested in this paper can be useful in health and ecological studies.

  18. Physical Activity Correlates in Middle School Adolescents: Perceived Benefits and Barriers and Their Determinants.

    Roth, Sarah E; Gill, Monique; Chan-Golston, Alec M; Rice, Lindsay N; Crespi, Catherine M; Koniak-Griffin, Deborah; Cole, Brian L; Upchurch, Dawn M; Prelip, Michael L

    2018-01-01

    The purpose of this study was to examine the determinants of benefits and barriers and their relationship with physical activity (PA) among predominantly Latino middle school students. Data were collected in a cross-sectional survey of 4,773 seventh-grade students recruited from a large, urban school district in Los Angeles. Hierarchical logistic regression models were used to assess determinants of benefits and barriers as well as their association with self-reported PA. Differences in benefits and barriers were observed by gender, ethnicity, and body size. Barriers were negatively correlated with all three PA outcomes while benefits were positively associated with exercising at least 60 min daily. A deeper understanding of benefits and barriers can facilitate the development of interventions and collaborative efforts among physical education teachers, school nurses, and administrators to implement comprehensive approaches that encourage students' participation in PA inside and outside of the classroom.

  19. The Size of Local Government Administration at a Municipal Level as a Determinant of Entrepreneurship

    Rusłan Harasym

    2017-01-01

    Full Text Available This artcle’s aim is to examine a dependency between local government administraton at a municipal level and the level of local entrepreneurship. This paper atempts to answer the queston of whether the size of the local government administraton has features of stmulant or de-stmulant in the process of setng up a business. In other words, does the size of public administraton at a local level (municipal level have a positve or negatve impact on creatng new business enttes? This is important due to at least a couple of reasons. First of all, the current research achievements are not extensive, when it comes to the publicatons that link entrepreneurship and the size of local government administraton. Secondly, the problem of entrepreneurship determinants consttutes stll topical and not fully investgated (or explained aspects of local economy development. Thirdly and fnally, the authors of this artcle have proposed and copyrighted an approach to the quantfcaton of the size of local government administraton, modifying commonly used measures of local public administraton. Thus, this artcle fts not only into the explanaton of the entrepreneurship phenomenon and its determinants, but also contributes to the development of knowledge about dependencies between the size of local selfgovernment and the entrepreneurship level. It expands the knowledge resource on analyzed dependencies and re-orients current approaches to similar research.

  20. An inverse modeling procedure to determine particle growth and nucleation rates from measured aerosol size distributions

    B. Verheggen

    2006-01-01

    Full Text Available Classical nucleation theory is unable to explain the ubiquity of nucleation events observed in the atmosphere. This shows a need for an empirical determination of the nucleation rate. Here we present a novel inverse modeling procedure to determine particle nucleation and growth rates based on consecutive measurements of the aerosol size distribution. The particle growth rate is determined by regression analysis of the measured change in the aerosol size distribution over time, taking into account the effects of processes such as coagulation, deposition and/or dilution. This allows the growth rate to be determined with a higher time-resolution than can be deduced from inspecting contour plots ('banana-plots''. Knowing the growth rate as a function of time enables the evaluation of the time of nucleation of measured particles of a certain size. The nucleation rate is then obtained by integrating the particle losses from time of measurement to time of nucleation. The regression analysis can also be used to determine or verify the optimum value of other parameters of interest, such as the wall loss or coagulation rate constants. As an example, the method is applied to smog chamber measurements. This program offers a powerful interpretive tool to study empirical aerosol population dynamics in general, and nucleation and growth in particular.

  1. Factors determining the average body size of geographically separated Arctodiaptomus salinus (Daday, 1885) populations.

    Anufriieva, Elena V; Shadrin, Nickolai V

    2014-03-01

    Arctodiaptomus salinus inhabits water bodies across Eurasia and North Africa. Based on our own data and that from the literature, we analyzed the influences of several factors on the intra- and inter-population variability of this species. A strong negative linear correlation between temperature and average body size in the Crimean and African populations was found, in which the parameters might be influenced by salinity. Meanwhile, a significant negative correlation between female body size and the altitude of habitats was found by comparing body size in populations from different regions. Individuals from environments with highly varying abiotic parameters, e.g. temporary reservoirs, had a larger body size than individuals from permanent water bodies. The changes in average body mass in populations were at 11.4 times, whereas, those in individual metabolic activities were at 6.2 times. Moreover, two size groups of A. salinus in the Crimean and the Siberian lakes were observed. The ratio of female length to male length fluctuated between 1.02 and 1.30. The average size of A. salinus in populations and its variations were determined by both genetic and environmental factors. However, the parities of these factors were unequal in either spatial or temporal scales.

  2. Factors that influence planning for physical activity among workers in small- and medium-sized enterprises

    Sawako Kawahara

    2018-06-01

    Full Text Available Physical activity (PA is necessary for improving the health of workers in small- to medium-sized enterprises (SMEs. However, behavioral changes conducive to PA are often difficult to achieve despite intentions. Because intention to perform PA does not always translate to action, proper planning may be critical for achieving PA. In this study, we aimed to identify factors related to planning for PA among workers in SMEs because this is one population that has been identified as being at higher risk for lifestyle-related diseases in Japan. Participants completed a series of validated questionnaires. Of 353 valid responses, 226 individuals (149 men; aged 47.5 ± 8.7 years stated their intention to perform PA. Multiple regression analysis indicated that a higher PA planning score was significantly associated with higher self-efficacy for PA (p < 0.001, higher risk perception regarding inactivity (p = 0.012, and greater knowledge of information about PA community services (p = 0.019. Therefore, we recommend that self-efficacy, risk perception, and information regarding PA community services are enhanced in the daily working lives of workers at their workplaces. In this manner, they can promote their planning of health behavioral changes in a supportive environment, drawing upon available services, supports, and other resources. Keywords: Workers, Planning, Intention, Physical activity, Small- and medium-sized enterprises

  3. Pore size determination using normalized J-function for different hydraulic flow units

    Ali Abedini

    2015-06-01

    Full Text Available Pore size determination of hydrocarbon reservoirs is one of the main challenging areas in reservoir studies. Precise estimation of this parameter leads to enhance the reservoir simulation, process evaluation, and further forecasting of reservoir behavior. Hence, it is of great importance to estimate the pore size of reservoir rocks with an appropriate accuracy. In the present study, a modified J-function was developed and applied to determine the pore radius in one of the hydrocarbon reservoir rocks located in the Middle East. The capillary pressure data vs. water saturation (Pc–Sw as well as routine reservoir core analysis include porosity (φ and permeability (k were used to develop the J-function. First, the normalized porosity (φz, the rock quality index (RQI, and the flow zone indicator (FZI concepts were used to categorize all data into discrete hydraulic flow units (HFU containing unique pore geometry and bedding characteristics. Thereafter, the modified J-function was used to normalize all capillary pressure curves corresponding to each of predetermined HFU. The results showed that the reservoir rock was classified into five separate rock types with the definite HFU and reservoir pore geometry. Eventually, the pore radius for each of these HFUs was determined using a developed equation obtained by normalized J-function corresponding to each HFU. The proposed equation is a function of reservoir rock characteristics including φz, FZI, lithology index (J*, and pore size distribution index (ɛ. This methodology used, the reservoir under study was classified into five discrete HFU with unique equations for permeability, normalized J-function and pore size. The proposed technique is able to apply on any reservoir to determine the pore size of the reservoir rock, specially the one with high range of heterogeneity in the reservoir rock properties.

  4. Density fractions versus size separates: does physical fractionation isolate functional soil compartments?

    C. Moni

    2012-12-01

    Full Text Available Physical fractionation is a widely used methodology to study soil organic matter (SOM dynamics, but concerns have been raised that the available fractionation methods do not well describe functional SOM pools. In this study we explore whether physical fractionation techniques isolate soil compartments in a meaningful and functionally relevant way for the investigation of litter-derived nitrogen dynamics at the decadal timescale. We do so by performing aggregate density fractionation (ADF and particle size-density fractionation (PSDF on mineral soil samples from two European beech forests a decade after application of 15N labelled litter.

    Both density and size-based fractionation methods suggested that litter-derived nitrogen became increasingly associated with the mineral phase as decomposition progressed, within aggregates and onto mineral surfaces. However, scientists investigating specific aspects of litter-derived nitrogen dynamics are pointed towards ADF when adsorption and aggregation processes are of interest, whereas PSDF is the superior tool to research the fate of particulate organic matter (POM.

    Some methodological caveats were observed mainly for the PSDF procedure, the most important one being that fine fractions isolated after sonication can not be linked to any defined decomposition pathway or protective mechanism. This also implies that historical assumptions about the "adsorbed" state of carbon associated with fine fractions need to be re-evaluated. Finally, this work demonstrates that establishing a comprehensive picture of whole soil OM dynamics requires a combination of both methodologies and we offer a suggestion for an efficient combination of the density and size-based approaches.

  5. Effect of different sizes of palm oil fuel ash (POFA) towards physical properties of modified bitumen

    Raja Zulkefli, R. N. A.; Yaacob, H.; Putra Jaya, R.; Warid, M. N. M.; Hassan, N.; Hainin, M. R.; Idham, M. K.

    2018-04-01

    In the past decades, numerous numbers of studies have been carried out to find ways enhancing properties of bitumen. Other than using polymer, agricultural waste such as palm oil fuel ash (POFA) is one of the waste products that can be used to modify bitumen. In this study, the physical and rheological properties of POFA modified bitumen were examined based on different grinding hour and different percentage of POFA. The bitumen were mixed with different percentages of POFA (0, 5 and 7%) which passed through 0.075 mm sieve and grinded at different period (1 and 4 hour). The samples were then tested and compared to conventional bitumen. From TEM results, POFA grinded at 1 hour have sizes between 3-7 µm while POFA grinded for 4 hours have finer sizes between 500 nm to 3 µm. The results showed that fineness of POFA affect properties of bitumen significantly. Decreasing in penetration value and decreasing in softening temperature indicates that the modified bitumen becomes harder than conventional bitumen. Modified bitumen gives best results when added with 7% POFA sizes of 500 nm to 3 µm compared to 3 to 7 µm.

  6. Sample size effect on the determination of the irreversibility line of high-Tc superconductors

    Li, Q.; Suenaga, M.; Li, Q.; Freltoft, T.

    1994-01-01

    The irreversibility lines of a high-J c superconducting Bi 2 Sr 2 Ca 2 Cu 3 O x /Ag tape were systematically measured upon a sequence of subdivisions of the sample. The irreversibility field H r (T) (parallel to the c axis) was found to change approximately as L 0.13 , where L is the effective dimension of the superconducting tape. Furthermore, it was found that the irreversibility line for a grain-aligned Bi 2 Sr 2 Ca 2 Cu 3 O x specimen can be approximately reproduced by the extrapolation of this relation down to a grain size of a few tens of micrometers. The observed size effect could significantly obscure the real physical meaning of the irreversibility lines. In addition, this finding surprisingly indicated that the Bi 2 Sr 2 Ca 2 Cu 2 O x /Ag tape and grain-aligned specimen may have similar flux line pinning strength

  7. Traceable size determination of nanoparticles, a comparison among European metrology institutes

    Meli, Felix; Klein, Tobias; Buhr, Egbert; Frase, Carl Georg; Gleber, Gudrun; Krumrey, Michael; Duta, Alexandru; Duta, Steluta; Korpelainen, Virpi; Bellotti, Roberto; Picotto, Gian Bartolo; Boyd, Robert D; Cuenat, Alexandre

    2012-01-01

    Within the European iMERA-Plus project ‘Traceable Characterisation of Nanoparticles’ various particle measurement procedures were developed and finally a measurement comparison for particle size was carried out among seven laboratories across six national metrology institutes. Seven high quality particle samples made from three different materials and having nominal sizes in the range from 10 to 200 nm were used. The participants applied five fundamentally different measurement methods, atomic force microscopy, dynamic light scattering (DLS), small-angle x-ray scattering, scanning electron microscopy and scanning electron microscopy in transmission mode, and provided a total of 48 independent, traceable results. The comparison reference values were determined as weighted means based on the estimated measurement uncertainties of the participants. The comparison reference values have combined standard uncertainties smaller than 1.4 nm for particles with sizes up to 100 nm. All methods, except DLS, provided consistent results. (paper)

  8. Liquidity Determinants of the Selected Banking Sectors and their Size Groups

    Jana Laštůvková

    2016-01-01

    Full Text Available The article focuses on the factors affecting the liquidity of selected bank sectors, as well as their size groups, using panel regression analysis. For higher complexity of the results, multiple dependent variables are used: liquidity creation, outflow and net change. The values are calculated based on the specific method of liquidity risk measurement – gross liquidity flows. The results indicate both multiple effects of some factors on the given variables, as well as isolated influence of factors on a single liquidity form or size group. Thus, when looking for determinants using just one form of liquidity, such as creation, the results need not necessarily comprehensively show the influence of the given factors, and can lead to erroneous conclusions. The results also point to the differing behaviours of the size groups and their different sensitivity on the factors; smaller banks have shown higher sensitivity on macroeconomic variables. Higher flexibility in regulation could lead to higher optimization.

  9. Observations of a potential size-effect in experimental determination of the hydraulic properties of fractures

    Witherspoon, P.A.; Amick, C.H.; Gale, J.E.; Iwai, K.

    1979-05-01

    In several recent investigations, experimental studies on the effect of normal stress on the hydraulic conductivity of a single fracture were made on three rock specimens ranging in cross-sectional area from 0.02 m 2 to over 1.0 m 2 . At the maximum stress levels that could be attained (10 to 20 MPa), minimum values of the fracture hydraulic conductivity were not the same for each rock specimen. These minimum values increased with specimen size, indicating that the determination of fracture conductivity may be significantly influenced by a size effect. The implications of these results are important. Cores collected in the field are normally not larger than 0.15 m in diameter. However, the results of this work suggest that when this size core is used for laboratory investigations, the results may be nonconservative in that fracture permeabilities will be significantly lower than will be found in the field. 6 figures

  10. Physical determinants of fibrinolysis in single fibrin fibers.

    Igal Bucay

    Full Text Available Fibrin fibers form the structural backbone of blood clots; fibrinolysis is the process in which plasmin digests fibrin fibers, effectively regulating the size and duration of a clot. To understand blood clot dissolution, the influence of clot structure and fiber properties must be separated from the effects of enzyme kinetics and perfusion rates into clots. Using an inverted optical microscope and fluorescently-labeled fibers suspended between micropatterned ridges, we have directly measured the lysis of individual fibrin fibers. We found that during lysis 64 ± 6% of fibers were transected at one point, but 29 ± 3% of fibers increase in length rather than dissolving or being transected. Thrombin and plasmin dose-response experiments showed that the elongation behavior was independent of plasmin concentration, but was instead dependent on the concentration of thrombin used during fiber polymerization, which correlated inversely with fiber diameter. Thinner fibers were more likely to lyse, while fibers greater than 200 ± 30 nm in diameter were more likely to elongate. Because lysis rates were greatly reduced in elongated fibers, we hypothesize that plasmin activity depends on fiber strain. Using polymer physics- and continuum mechanics-based mathematical models, we show that fibers polymerize in a strained state and that thicker fibers lose their prestrain more rapidly than thinner fibers during lysis, which may explain why thick fibers elongate and thin fibers lyse. These results highlight how subtle differences in the diameter and prestrain of fibers could lead to dramatically different lytic susceptibilities.

  11. Physical (a)causality determinism, randomness and uncaused events

    Svozil, Karl

    2018-01-01

    This book is open access under a CC BY 4.0 license. This book addresses the physical phenomenon of events that seem to occur spontaneously and without any known cause. These are to be contrasted with events that happen in a (pre-)determined, predictable, lawful, and causal way. All our knowledge is based on self-reflexive theorizing, as well as on operational means of empirical perception. Some of the questions that arise are the following: are these limitations reflected by our models? Under what circumstances does chance kick in? Is chance in physics merely epistemic? In other words, do we simply not know enough, or use too crude levels of description for our predictions? Or are certain events "truly", that is, irreducibly, random? The book tries to answer some of these questions by introducing intrinsic, embedded observers and provable unknowns; that is, observables and procedures which are certified (relative to the assumptions) to be unknowable or undoable. A (somewhat iconoclastic) review of quantum mec...

  12. Determination of subcellular compartment sizes for estimating dose variations in radiotherapy

    Poole, Christopher M.; Ahnesjo, Anders; Enger, Shirin A.

    2015-01-01

    The variation in specific energy absorbed to different cell compartments caused by variations in size and chemical composition is poorly investigated in radiotherapy. The aim of this study was to develop an algorithm to derive cell and cell nuclei size distributions from 2D histology samples, and build 3D cellular geometries to provide Monte Carlo (MC)-based dose calculation engines with a morphologically relevant input geometry. Stained and unstained regions of the histology samples are segmented using a Gaussian mixture model, and individual cell nuclei are identified via thresholding. Delaunay triangulation is applied to determine the distribution of distances between the centroids of nearest neighbour cells. A pouring simulation is used to build a 3D virtual tissue sample, with cell radii randomised according to the cell size distribution determined from the histology samples. A slice with the same thickness as the histology sample is cut through the 3D data and characterised in the same way as the measured histology. The comparison between this virtual slice and the measured histology is used to adjust the initial cell size distribution into the pouring simulation. This iterative approach of a pouring simulation with adjustments guided by comparison is continued until an input cell size distribution is found that yields a distribution in the sliced geometry that agrees with the measured histology samples. The thus obtained morphologically realistic 3D cellular geometry can be used as input to MC-based dose calculation programs for studies of dose response due to variations in morphology and size of tumour/healthy tissue cells/nuclei, and extracellular material. (authors)

  13. Usage of Parameterized Fatigue Spectra and Physics-Based Systems Engineering Models for Wind Turbine Component Sizing: Preprint

    Parsons, Taylor; Guo, Yi; Veers, Paul; Dykes, Katherine; Damiani, Rick

    2016-01-26

    Software models that use design-level input variables and physics-based engineering analysis for estimating the mass and geometrical properties of components in large-scale machinery can be very useful for analyzing design trade-offs in complex systems. This study uses DriveSE, an OpenMDAO-based drivetrain model that uses stress and deflection criteria to size drivetrain components within a geared, upwind wind turbine. Because a full lifetime fatigue load spectrum can only be defined using computationally-expensive simulations in programs such as FAST, a parameterized fatigue loads spectrum that depends on wind conditions, rotor diameter, and turbine design life has been implemented. The parameterized fatigue spectrum is only used in this paper to demonstrate the proposed fatigue analysis approach. This paper details a three-part investigation of the parameterized approach and a comparison of the DriveSE model with and without fatigue analysis on the main shaft system. It compares loads from three turbines of varying size and determines if and when fatigue governs drivetrain sizing compared to extreme load-driven design. It also investigates the model's sensitivity to shaft material parameters. The intent of this paper is to demonstrate how fatigue considerations in addition to extreme loads can be brought into a system engineering optimization.

  14. The roles of productivity and ecosystem size in determining food chain length in tropical terrestrial ecosystems.

    Young, Hillary S; McCauley, Douglas J; Dunbar, Robert B; Hutson, Michael S; Ter-Kuile, Ana Miller; Dirzo, Rodolfo

    2013-03-01

    Many different drivers, including productivity, ecosystem size, and disturbance, have been considered to explain natural variation in the length of food chains. Much remains unknown about the role of these various drivers in determining food chain length, and particularly about the mechanisms by which they may operate in terrestrial ecosystems, which have quite different ecological constraints than aquatic environments, where most food chain length studies have been thus far conducted. In this study, we tested the relative importance of ecosystem size and productivity in influencing food chain length in a terrestrial setting. We determined that (1) there is no effect of ecosystem size or productive space on food chain length; (2) rather, food chain length increases strongly and linearly with productivity; and (3) the observed changes in food chain length are likely achieved through a combination of changes in predator size, predator behavior, and consumer diversity along gradients in productivity. These results lend new insight into the mechanisms by which productivity can drive changes in food chain length, point to potential for systematic differences in the drivers of food web structure between terrestrial and aquatic systems, and challenge us to consider how ecological context may control the drivers that shape food chain length.

  15. Determination of crack size around rivet hole through neural network using ultrasonic Lamb wave

    Choi, Sang Woo; Lee, Joon Hyun

    1998-01-01

    Rivets are typical structural features that are potential initiation sites for fatigue crack due to combination of local stress concentration around rivet hole and moisture trapping. For the viewpoint of structural assurance, it is crucial to evaluate the size of crack around rivets by appropriate nondestructive techniques. Guided waves, which direct wave energy along the plate, carry information about the material in their path and offer a potentially more efficient tool for nondestructive inspection of structural material. Neural network that is considered to be the most suitable for pattern recognition and has been used by researchers in NDE field to classify different types of flaws and flaw size. In this study, crack size determination around rivet through a neural network based on the back-propagation algorithm has been done by extracting some feature from time-domain waveforms of ultrasonic Lamb wave for Al 2024-T3 skin panel of aircraft. Special attention was paid to reduce the coupling effect between transducer and specimen by extracting some features related to only time component data in ultrasonic waveform. It was demonstrated clearly that features extraction based on time component data of the time-domain waveform of Lamb wave was very useful to determine crack size initiated from rivet hole through neural network.

  16. Is patient size important in dose determination and optimization in cardiology?

    Reay, J; Chapple, C L; Kotre, C J

    2003-01-01

    Patient dose determination and optimization have become more topical in recent years with the implementation of the Medical Exposures Directive into national legislation, the Ionising Radiation (Medical Exposure) Regulations. This legislation incorporates a requirement for new equipment to provide a means of displaying a measure of patient exposure and introduces the concept of diagnostic reference levels. It is normally assumed that patient dose is governed largely by patient size; however, in cardiology, where procedures are often very complex, the significance of patient size is less well understood. This study considers over 9000 cardiology procedures, undertaken throughout the north of England, and investigates the relationship between patient size and dose. It uses simple linear regression to calculate both correlation coefficients and significance levels for data sorted by both room and individual clinician for the four most common examinations, left ventrical and/or coronary angiography, single vessel stent insertion and single vessel angioplasty. This paper concludes that the correlation between patient size and dose is weak for the procedures considered. It also illustrates the use of an existing method for removing the effect of patient size from dose survey data. This allows typical doses and, therefore, reference levels to be defined for the purposes of dose optimization

  17. Determination of particle size distribution of salt crystals in aqueous slurries

    Miller, A.G.

    1977-10-01

    A method for determining particle size distribution of water-soluble crystals in aqueous slurries is described. The salt slurries, containing sodium salts of predominantly nitrate, but also nitrite, sulfate, phosphate, aluminates, carbonate, and hydroxide, occur in radioactive, concentrated chemical waste from the reprocessing of nuclear fuel elements. The method involves separating the crystals from the aqueous phase, drying them, and then dispersing the crystals in a nonaqueous medium based on nitroethane. Ultrasonic treatment is important in dispersing the sample into its fundamental crystals. The dispersed crystals are sieved into appropriate size ranges for counting with a HIAC brand particle counter. A preponderance of very fine particles in a slurry was found to increase the difficulty of effecting complete dispersion of the crystals because of the tendency to retain traces of aqueous mother liquor. Traces of moisture produce agglomerates of crystals, the extent of agglomeration being dependent on the amount of moisture present. The procedure is applicable to particles within the 2 to 600 μm size range of the HIAC particle counter. The procedure provides an effective means for measuring particle size distribution of crystals in aqueous salt slurries even when most crystals are less than 10 μm in size. 19 figures

  18. Final report on: Grain size determination in zirconium alloys (IAEA Research Contract No. 6025/Rb.)

    Martinez M, E.

    1991-12-01

    In spite of the amount of research developed the knowledge still is far from complete and in this basis the International Atomic Energy Agency, (IAEA), by means of the Working Group on Water Reactor Fuel Performance and Technology, initiated, in 1990 the Coordinated Research Programme named Grain Size Determination In Zirconium Alloys. Several countries were invited to participate and to contribute to the main objective of the programme, which can be state as: To develop a unified metallographic technique capable to show the microstructure of zircaloy in a reproducible and uniform manner. To fulfill the objective the following goals were established: A. To measure the grain size and perform an statistical treatment, in samples prepared specifically to show different amounts of cold work, recrystallization and grain growth. B. To compare the results obtained by the different laboratories involved in the programme. C. Finally, after the Ugine meeting, also the determination of the recrystallization and grain growth kinetics. (Author)

  19. Determining the optimal size of small molecule mixtures for high throughput NMR screening

    Mercier, Kelly A.; Powers, Robert

    2005-01-01

    High-throughput screening (HTS) using NMR spectroscopy has become a common component of the drug discovery effort and is widely used throughout the pharmaceutical industry. NMR provides additional information about the nature of small molecule-protein interactions compared to traditional HTS methods. In order to achieve comparable efficiency, small molecules are often screened as mixtures in NMR-based assays. Nevertheless, an analysis of the efficiency of mixtures and a corresponding determination of the optimum mixture size (OMS) that minimizes the amount of material and instrumentation time required for an NMR screen has been lacking. A model for calculating OMS based on the application of the hypergeometric distribution function to determine the probability of a 'hit' for various mixture sizes and hit rates is presented. An alternative method for the deconvolution of large screening mixtures is also discussed. These methods have been applied in a high-throughput NMR screening assay using a small, directed library

  20. Functional size of photosynthetic electron transport chain determined by radiation inactivation

    Pan, R.S.; Chen, L.F.; Wang, M.Y.; Tsal, M.Y.; Pan, R.L.; Hsu, B.D.

    1987-01-01

    Radiation inactivation technique was employed to determine the functional size of photosynthetic electron transport chain of spinach chloroplasts. The functional size for photosystem I+II(H 2 O to methylviologen) was 623 +/- 37 kilodaltons; for photosystem II (H 2 O to dimethylquinone/ferricyanide), 174 +/- 11 kilodaltons; and for photosystem I (reduced diaminodurene to methylviologen), 190 +/- 11 kilodaltons. The difference between 364 +/- 22 (the sum of 174 +/- 11 and 190 +/- 11) kilodaltons and 623 +/- 37 kilodaltons is partially explained to be due to the presence of two molecules of cytochrome b 6 /f complex of 280 kilodaltons. The molecular mass for other partial reactions of photosynthetic electron flow, also measured by radiation inactivation, is reported. The molecular mass obtained by this technique is compared with that determined by other conventional biochemical methods. A working hypothesis for the composition, stoichiometry, and organization of polypeptides for photosynthetic electron transport chain is proposed

  1. Sonographic determination of normal spleen size in an adult African population

    Mustapha, Zainab; Tahir, Abdulrahman [Department of Radiology, University of Maiduguri Teaching Hospital, Maiduguri, Borno State (Nigeria); Tukur, Maisaratu [Department of Human Physiology, University of Maiduguri, Maiduguri, Borno State (Nigeria); Bukar, Mohammed [Department of Obstetrics and Gynaecology, University of Maiduguri Teaching Hospital, Maiduguri, Borno State (Nigeria); Lee, Wai-Kit, E-mail: leewk33@hotmail.co [Department of Medical Imaging, St. Vincent' s Hospital, University of Melbourne, 41 Victoria Parade, Fitzroy, Victoria 3065 (Australia)

    2010-07-15

    Objective: The purpose of this study was to determine the normal range of spleen size in an adult African population, and compare the findings to published data to determine any correlation with ethnicity. Materials and methods: Three hundred and seventy-four African adults without conditions that can affect the spleen or splenic abnormalities were evaluated with ultrasonography. Spleen length, width and thickness were measured and spleen volume calculated. Spleen size was correlated with age, gender, height, weight, and body mass index. Results: The mean spleen volume was 120 cm{sup 3}. Spleen volume correlated with spleen width (r = 0.85), thickness (r = 0.83) and length (r = 0.80). Men had a larger mean spleen volume than women. No correlation was found between spleen volume and age, weight, height, or body mass index. Conclusion: Mean spleen volume in African adults is smaller than data from Western sources, and cannot be explained by difference in body habitus.

  2. Being Barbie: The Size of One’s Own Body Determines the Perceived Size of the World

    van der Hoort, Björn; Guterstam, Arvid; Ehrsson, H. Henrik

    2011-01-01

    A classical question in philosophy and psychology is if the sense of one's body influences how one visually perceives the world. Several theoreticians have suggested that our own body serves as a fundamental reference in visual perception of sizes and distances, although compelling experimental evidence for this hypothesis is lacking. In contrast, modern textbooks typically explain the perception of object size and distance by the combination of information from different visual cues. Here, we describe full body illusions in which subjects experience the ownership of a doll's body (80 cm or 30 cm) and a giant's body (400 cm) and use these as tools to demonstrate that the size of one's sensed own body directly influences the perception of object size and distance. These effects were quantified in ten separate experiments with complementary verbal, questionnaire, manual, walking, and physiological measures. When participants experienced the tiny body as their own, they perceived objects to be larger and farther away, and when they experienced the large-body illusion, they perceived objects to be smaller and nearer. Importantly, despite identical retinal input, this “body size effect” was greater when the participants experienced a sense of ownership of the artificial bodies compared to a control condition in which ownership was disrupted. These findings are fundamentally important as they suggest a causal relationship between the representations of body space and external space. Thus, our own body size affects how we perceive the world. PMID:21633503

  3. Gridsampler – A Simulation Tool to Determine the Required Sample Size for Repertory Grid Studies

    Heckmann, Mark; Burk, Lukas

    2017-01-01

    The repertory grid is a psychological data collection technique that is used to elicit qualitative data in the form of attributes as well as quantitative ratings. A common approach for evaluating multiple repertory grid data is sorting the elicited bipolar attributes (so called constructs) into mutually exclusive categories by means of content analysis. An important question when planning this type of study is determining the sample size needed to a) discover all attribute categories relevant...

  4. Particle size determination in small solid propellant rocket motors using the diffractively scattered light method.

    Cramer, Robert Grewelle.

    1982-01-01

    Approved for public release; distribution unlimited A dual beam apparatus was developed which simultaneously measured particle size (D32) at the entrance and exit of an exhaust nozzle of a small solid propellant rocket motor. The diameters were determined using measurements of dif fractiveiy scattered laser power spectra. The apparatus was calibrated by using spherical glass beads and aluminum oxide powder. Measurements were successfully made at both locations. Because of...

  5. Determinants of capital structure in small and medium sized enterprises in Malaysia

    Mat Nawi, Hafizah

    2015-01-01

    This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London This study aims to investigate the determinants of capital structure in small and medium-sized enterprises (SMEs) in Malaysia and their effect on firms’ performance. The study addresses the following primary question: What are the factors that influence the capital structure of SMEs in Malaysia? The sample of this research is SMEs in the east coast region of Malaysia. Adopting a posi...

  6. Determining consumer purchase intentions: the importance of dry matter, size, and price of kiwifruit.

    Jaeger, Sara R; Harker, Roger; Triggs, Chris M; Gunson, Anne; Campbell, Rachel L; Jackman, Richard; Requejo-Jackman, Cecilia

    2011-04-01

    Knowledge of the relative importance of food quality attributes in determining consumer purchase intention is critical for robust assessment of economic opportunities for industry growth. The aim of this study is to demonstrate how conjoint analysis methodology that incorporates tasting of fruit can be used to collect such information. Three hundred Japanese consumers took part in research designed to measure the importance of dry matter (DM), size, and price of kiwifruit (Actinidia deliciosa "Hayward" and Actinidia chinensis "Hort16A") for purchase intention. Measurement of consumer liking for kiwifruit of different DM content was a key first step. Liking increased as DM increased and was accompanied by increased purchase likelihood/choice probability for kiwifruit. The size of kiwifruit presented to consumers varied from "small" to "extra large." Consumers liked "mid-sized" kiwifruit over "small" or "extra-large" kiwifruit. Despite these differences in liking, size was of little importance in determining purchase likelihood/choice probability for kiwifruit. Price was a very important factor in determining purchase likelihood/choice probability but was less important than DM content. As price increased, purchase likelihood/choice probability decreased. Beneath these general findings, heterogeneity existed. Some consumers placed more/less importance on the focal purchase drivers than suggested by the aggregate model. Overall, the results suggest that incentive schemes already implemented by industry should consider rewarding high-DM fruit more than fruit size.   This research has contributed to the New Zealand kiwifruit industry gaining a better understanding of the relative importance consumers place on DM, size, and price of kiwifruit and has resulted in changes to grower incentive schemes. The research approach presented forces consumer to tradeoff attributes of kiwifruit against each other and decide on how important two key quality attributes-DM and

  7. Are the determinants of markup size industry-specific? The case of Slovenian manufacturing firms

    Ponikvar Nina

    2011-01-01

    Full Text Available The aim of this paper is to identify factors that affect the pricing policy in Slovenian manufacturing firms in terms of the markup size and, most of all, to explicitly account for the possibility of differences in pricing procedures among manufacturing industries. Accordingly, the analysis of the dynamic panel is carried out on an industry-by-industry basis, allowing the coefficients on the markup determinants to vary across industries. We find that the oligopoly theory of markup determination for the most part holds for the manufacturing sector as a whole, although large variability in markup determinants exists across industries within the Slovenian manufacturing. Our main conclusion is that each industry should be investigated separately in detail in order to assess the precise role of markup factors in the markup-determination process.

  8. A universal laboratory method for determining physical parameters of radon migration in dry granulated porous media.

    Ye, Yong-Jun; Zhang, Yun-Feng; Dai, Xin-Tao; Ding, De-Xin

    2017-10-01

    The particle size and heaped methods of exhalation media have important effects on physical parameters, such as the free radon production rate, porosity, permeability, and radon diffusion coefficient. However, existing methods for determining those parameters are too complex, and time-consuming. In this study, a novel, systematic determining method was proposed based on nuclide decay, radon diffusion migration theory, and the mass conservation law, and an associated experimental device was designed and manufactured. The parameters of uranium ore heap and sandy soil of radon diffusion coefficient (D), free radon production rate (α), media permeability (k), and porosity (ε) were obtained. At the same time, the practicality of the novel determining method was improved over other methods, with the results showing that accuracy was within the acceptable range of experimental error. This novel method will be of significance for the study of radon migration and exhalation in granulated porous media. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Molecular sizes of lichen ice nucleation sites determined by gamma radiation inactivation analysis

    Kieft, T.L.; Ruscetti, T.

    1992-01-01

    It has previously been shown that some species of lichen fungi contain proteinaceous ice nuclei which are active at temperatures as warm as −2 °C. This experiment was undertaken to determine the molecular sizes of ice nuclei in the lichen fungus Rhizoplaca chrysoleuca and to compare them to bacterial ice nuclei from Pseudomonas syringae. Gamma radiation inactivation analysis was used to determine molecular weights. Radiation inactivation analysis is based on target theory, which states that the likelihood of a molecule being inactivated by gamma rays increases as its size increases. Three different sources of ice nuclei from the lichen R. chrysoleuca were tested: field-collected lichens, extract of lichen fungus, and a pure culture of the fungus R. chrysoleuca. P. syringae strain Cit7 was used as a source of bacterial ice nuclei. Samples were lyophilized, irradiated with gamma doses ranging from 0 to 10.4 Mrads, and then tested for ice nucleation activity using a droplet-freezing assay. Data for all four types of samples were in rough agreement; sizes of nucleation sites increased logarithmically with increasing temperatures of ice nucleation activity. Molecular weights of nucleation sites active between −3 and −4 °C from the bacteria and from the field-collected lichens were approximately 1.0 × 10 6 Da. Nuclei from the lichen fungus and in the lichen extract appeared to be slightly smaller but followed the same log-normal pattern with temperature of ice nucleation activity. The data for both the bacterial and lichen ice nuclei are in agreement with ice nucleation theory which states that the size of ice nucleation sites increases logarithmically as the temperature of nucleation increases linearly. This suggests that although some differences exist between bacterial and lichen ice nucleation sites, their molecular sizes are quite similar

  10. Synthesis of Uncarbonised Coconut Shell Nanoparticles: Characterisation and Particle Size Determination

    S.A. Bello

    2015-06-01

    Full Text Available The possibility of using mechanical milling for the synthesis of uncarbonised coconut shell nanoparticles (UCSNPs has been investigated. UCSNPs were synthesized from discarded coconut shells (CSs using top down approach. The sundried CSs were crushed, ground and then sieved using hammer crusher, a two disc grinder and set of sieves with shine shaker respectively. The CS powders retained in the pan below 37 µm sized sieve were milled for 70 hours to obtain UCSNPS. Samples for analysis were taken at 16 and 70 hours. UCSNPs were analyzed using transmission electron microscope (TEM, scanning electron microscope (SEM with attached EDS and Gwyddion software. Samples of UCSNPs obtained at 16 and 70hours show that the deep brown colour of the initial CS powder became fading as the milling hour increased. The size determination from TEM image revealed spherical particles with an average size of 18.23 nm for UCSNPs obtained at 70 hour milling. The EDS spectrographs revealed an increase in the carbon counts with increased milling hours. This is attributable to dryness of the CS powders by the heat generated during the milling process due to absorption of kinetic energy by the CS powders from the milling balls. SEM micrographs revealed UCSNPs in agglomerated networks. The SEM micrograph/Gyweddion particles size determination showed average particles of 170.5 ±3 and 104.9 ±4.1 nm for UCSNPs obtained at 16 and 70 hours respectively. Therefore, production of UCSNPs through mechanical milling using mixture of ceramic balls of different sizes has been established especially when the particles of the sourced/initial CS powders falls below 37 µm.

  11. Bimodal distribution of the magnetic dipole moment in nanoparticles with a monomodal distribution of the physical size

    van Rijssel, Jozef; Kuipers, Bonny W M; Erne, Ben

    2015-01-01

    High-frequency applications of magnetic nanoparticles, such as therapeutic hyperthermia and magnetic particle imaging, are sensitive to nanoparticle size and dipole moment. Usually, it is assumed that magnetic nanoparticles with a log-normal distribution of the physical size also have a log-normal

  12. Solid oxide fuel cell cathode infiltrate particle size control and oxygen surface exchange resistance determination

    Burye, Theodore E.

    Over the past decade, nano-sized Mixed Ionic Electronic Conducting (MIEC) -- micro-sized Ionic Conducting (IC) composite cathodes produced by the infiltration method have received much attention in the literature due to their low polarization resistance (RP) at intermediate (500-700°C) operating temperatures. Small infiltrated MIEC oxide nano-particle size and low intrinsic MIEC oxygen surface exchange resistance (Rs) have been two critical factors allowing these Nano-Micro-Composite Cathodes (NMCCs) to achieve high performance and/or low temperature operation. Unfortunately, previous studies have not found a reliable method to control or reduce infiltrated nano-particle size. In addition, controversy exists on the best MIEC infiltrate composition because: 1) Rs measurements on infiltrated MIEC particles are presently unavailable in the literature, and 2) bulk and thin film Rs measurements on nominally identical MIEC compositions often vary by up to 3 orders of magnitude. Here, two processing techniques, precursor nitrate solution desiccation and ceria oxide pre-infiltration, were developed to systematically produce a reduction in the average La0.6Sr0.4Co0.8Fe 0.2O3-delta (LSCF) infiltrated nano-particle size from 50 nm to 22 nm. This particle size reduction reduced the SOFC operating temperature, (defined as the temperature where RP=0.1 Ocm 2) from 650°C to 540°C. In addition, Rs values for infiltrated MIEC particles were determined for the first time through finite element modeling calculations on 3D Focused Ion Beam-Scanning Electron Microscope (FIB-SEM) reconstructions of electrochemically characterized infiltrated electrodes.

  13. Physical and psychological determinants of injury in Ontario forest firefighters.

    Gordon, H; Larivière, M

    2014-12-01

    Forest firefighters are faced with multiple physical and psychological challenges as a result of their duties. Little is known about the determinants of injury among these workers. The Ontario Ministry of Natural Resources (OMNR) Aviation, Forest Fire and Emergency Services (AFFES) records detailed information on two mutually exclusive types of workplace injury: First aid (self-reported) and Workplace Safety Insurance Board (WSIB, i.e. received medical attention). To identify the contributions of physical and psychological factors on the likelihood of injury among forest firefighters. Participants were male and female forest firefighters aged between 18 and 65. Data were collected using two self-administered instruments: The NEO Personality Inventory and the Job Stress Survey. Secondary data were collected from the OMNR AFFES and data were analysed by way of multivariate statistical procedures. There were 252 participants. Those who were older, had a history of injury, had high scores for the personality construct of Neuroticism or low scores for the Openness construct were significantly more likely to incur a first aid injury, while those with high experience levels were significantly less likely to incur injury (P First aid and WSIB injuries in the OMNR AFFES were quite distinct phenomena and different factors need consideration in their prediction. It is recommended that managers and decision-makers in this field consider factors such as job stress, personality and the prior occurrence of injuries in their assessment of risk. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Value of adenosine infusion for infarct size determination using real-time myocardial contrast echocardiography

    da Luz Protásio

    2006-02-01

    Full Text Available Abstract Background Myocardial contrast echocardiography has been used for determination of infarct size (IS in experimental models. However, with intermittent harmonic imaging, IS seems to be underestimated immediately after reperfusion due to areas with preserved, yet dysfunctional, microvasculature. The use of exogenous vasodilators showed to be useful to unmask these infarcted areas with depressed coronary flow reserve. This study was undertaken to assess the value of adenosine for IS determination in an open-chest canine model of coronary occlusion and reperfusion, using real-time myocardial contrast echocardiography (RTMCE. Methods Nine dogs underwent 180 minutes of coronary occlusion followed by reperfusion. PESDA (Perfluorocarbon-Exposed Sonicated Dextrose Albumin was used as contrast agent. IS was determined by RTMCE before and during adenosine infusion at a rate of 140 mcg·Kg-1·min-1. Post-mortem necrotic area was determined by triphenyl-tetrazolium chloride (TTC staining. Results IS determined by RTMCE was 1.98 ± 1.30 cm2 and increased to 2.58 ± 1.53 cm2 during adenosine infusion (p = 0.004, with good correlation between measurements (r = 0.91; p 2 and showed no significant difference with IS determined by RTMCE before or during hyperemia. A slight better correlation between RTMCE and TTC measurements was observed during adenosine (r = 0.99; p Conclusion RTMCE can accurately determine IS in immediate period after acute myocardial infarction. Adenosine infusion results in a slight better detection of actual size of myocardial damage.

  15. Determination of the quality index (Q) for photon beams at arbitrary field sizes.

    Sauer, Otto A

    2009-09-01

    A commonly used beam quality index (Q) for high-energy photon beams is the tissue phantom ratio (TPR20,10) for a square field of 10 x 10 cm2 and SDD of 100 cm. On some specialized radiotherapy treatment equipment such a reference collimator setting is not achievable. Likewise a flat beam profile, not explicitly required in dosimetry protocols, but certainly influences the measurement of Q, is not always produced. In this work, a method was developed in order to determine Q at any field size, especially for small and nonflattened beams. An analytical relationship was derived between TPR20,10 for arbitrary field sizes and Q [the TPR20,10 (10 x 10 cm2)] as quality index. The proposed model equation was fitted to the measured and published data in order to achieve three general fit parameters. The procedure was then tested with published data from TomoTherapy and CyperKnife treatment devices. For standard flattened photon fields, the uncertainty in Q measured at any field size using the parameters derived from this study is better than 1%. In flattening-filter free beams, the proposed procedure results in a reliable Q for any field size setting. A method is introduced and successfully tested in order to measure the beam quality under nonstandard conditions. It can be used, e.g., to get energy dependent correction factors as tabulated in dosimetry codes of practice even if standard conditions are not adjustable.

  16. Aggregate size and structure determination of nanomaterials in physiological media: importance of dynamic evolution

    Afrooz, A. R. M. Nabiul; Hussain, Saber M.; Saleh, Navid B.

    2014-01-01

    Most in vitro nanotoxicological assays are performed after 24 h exposure. However, in determining size and shape effect of nanoparticles in toxicity assays, initial characterization data are generally used to describe experimental outcome. The dynamic size and structure of aggregates are typically ignored in these studies. This brief communication reports dynamic evolution of aggregation characteristics of gold nanoparticles. The study finds that gradual increase in aggregate size of gold nanospheres (AuNS) occurs up to 6 h duration; beyond this time period, the aggregation process deviates from gradual to a more abrupt behavior as large networks are formed. Results of the study also show that aggregated clusters possess unique structural conformation depending on nominal diameter of the nanoparticles. The differences in fractal dimensions of the AuNS samples likely occurred due to geometric differences, causing larger packing propensities for smaller sized particles. Both such observations can have profound influence on dosimetry for in vitro nanotoxicity analyses.Graphical Abstract

  17. Aggregate size and structure determination of nanomaterials in physiological media: importance of dynamic evolution

    Afrooz, A. R. M. Nabiul [The University of Texas, Civil, Architectural and Environmental Engineering (United States); Hussain, Saber M. [Wright-Patterson AFB, Human Effectiveness Directorate, 711th Human Performance Wing, Air Force Research Laboratory (United States); Saleh, Navid B., E-mail: navid.saleh@utexas.edu [The University of Texas, Civil, Architectural and Environmental Engineering (United States)

    2014-12-15

    Most in vitro nanotoxicological assays are performed after 24 h exposure. However, in determining size and shape effect of nanoparticles in toxicity assays, initial characterization data are generally used to describe experimental outcome. The dynamic size and structure of aggregates are typically ignored in these studies. This brief communication reports dynamic evolution of aggregation characteristics of gold nanoparticles. The study finds that gradual increase in aggregate size of gold nanospheres (AuNS) occurs up to 6 h duration; beyond this time period, the aggregation process deviates from gradual to a more abrupt behavior as large networks are formed. Results of the study also show that aggregated clusters possess unique structural conformation depending on nominal diameter of the nanoparticles. The differences in fractal dimensions of the AuNS samples likely occurred due to geometric differences, causing larger packing propensities for smaller sized particles. Both such observations can have profound influence on dosimetry for in vitro nanotoxicity analyses.Graphical Abstract.

  18. Sample size determination for disease prevalence studies with partially validated data.

    Qiu, Shi-Fang; Poon, Wai-Yin; Tang, Man-Lai

    2016-02-01

    Disease prevalence is an important topic in medical research, and its study is based on data that are obtained by classifying subjects according to whether a disease has been contracted. Classification can be conducted with high-cost gold standard tests or low-cost screening tests, but the latter are subject to the misclassification of subjects. As a compromise between the two, many research studies use partially validated datasets in which all data points are classified by fallible tests, and some of the data points are validated in the sense that they are also classified by the completely accurate gold-standard test. In this article, we investigate the determination of sample sizes for disease prevalence studies with partially validated data. We use two approaches. The first is to find sample sizes that can achieve a pre-specified power of a statistical test at a chosen significance level, and the second is to find sample sizes that can control the width of a confidence interval with a pre-specified confidence level. Empirical studies have been conducted to demonstrate the performance of various testing procedures with the proposed sample sizes. The applicability of the proposed methods are illustrated by a real-data example. © The Author(s) 2012.

  19. Determinants of family size in a Gulf Arab state: a comparison between two areas.

    Hamadeh, Randah R; Al-Roomi, Khaldoon; Masuadi, Emad

    2008-09-01

    The rapid economic transition in the Gulf Arab countries has resulted in marked changes in fertility and marriage patterns and a decrease in the number of children per family. Yet little is known about the determinants of family size in urban and less urban areas. A cross-sectional study was carried out on 450 Kuwaiti women aged 20-60 years who attended health care centres in Al Asima and Al Jahra governorates. A semi-structured questionnaire was administered through face-to-face interview which included variables on socio-demographic characteristics, family size, actual and ideal spacing, marriage related variables, health conditions and utilization of health services. Both univariate and multivariate analyses were performed to identify the factors that affect family size. The socio-economic indicators were significantly better in Al Asima, the capital, than in Al Jahra, a less urbanized area. On average, family size for the total sample was 5.97 +/- 0.114 with a larger size (6.27 +/- 0.242) in Al Jahra than in Al Asima (5.80 +/- 0.118) but without a significant difference. Al Jahra women reported a larger number of deliveries and past pregnancies but a lower usage of contraceptive measures. The total fertility rate was 3.65 in Al Asima, 3.84 in Al Jahra and 3.71 births per woman in the total population. Family size was inversely related to the educational level of women and their husbands. Currently employed women had a smaller family size (5.22 +/- 0.119) than the unemployed (6.81 +/- 0.187); p Families where the husband was the decision-maker on the number of children had a significantly larger family size (6.91 +/- 0.451) than families where the couple both participated in the decision (5.83 +/- 0.129; p = 0.032). The duration of marriage, ideal number of children, age of women at last delivery, number of rooms and the crowding index had significant positive effects on family size, whereas age at first delivery, duration between two consecutive pregnancies and

  20. Determinants of physical activity in university students: a literary review

    Ana Isabel Caro-Freile

    2017-05-01

    Full Text Available Physical activity refers to the body movement that generates energy expenditure, its frequent practice improves physical and mental functions; Active transportation, daily activities and recreation correspond to the most common form of physical activity. In Colombia the majority of the population is inactive, children are more active, but this condition decreases with age, the percentage of college students who engage in physical activity is low, this practice is conditioned by internal motivation, physical condition, Availability of time and social support. The taste for sports, the competitive spirit, the improvement of the corporal image, the management of the stress and the benefits for the health are motivating factors for the practice of the physical activity in university students; On the other hand, laziness, fear of injury, lack of sports scenarios and insecurity of the environment are the most frequent barriers to physical activity in this population

  1. Determination of Flaw Size and Depth From Temporal Evolution of Thermal Response

    Winfree, William P.; Zalameda, Joseph N.; Cramer, Elliott; Howell, Patricia A.

    2015-01-01

    Simple methods for reducing the pulsed thermographic responses of flaws have tended to be based on either the spatial or temporal response. This independent assessment limits the accuracy of characterization. A variational approach is presented for reducing the thermographic data to produce an estimated size for a flaw that incorporates both the temporal and spatial response to improve the characterization. The size and depth are determined from both the temporal and spatial thermal response of the exterior surface above a flaw and constraints on the length of the contour surrounding the delamination. Examples of the application of the technique to simulation and experimental data acquired are presented to investigate the limitations of the technique.

  2. A ROBUST DETERMINATION OF THE SIZE OF QUASAR ACCRETION DISKS USING GRAVITATIONAL MICROLENSING

    Jiménez-Vicente, J.; Mediavilla, E.; Muñoz, J. A.; Kochanek, C. S.

    2012-01-01

    Using microlensing measurements for a sample of 27 image pairs of 19 lensed quasars we determine a maximum likelihood estimate for the accretion disk size of an average quasar of r s = 4.0 +2.4 –3.1 lt-day at rest frame (λ) = 1736 Å for microlenses with a mean mass of (M) = 0.3 M ☉ . This value, in good agreement with previous results from smaller samples, is roughly a factor of five greater than the predictions of the standard thin disk model. The individual size estimates for the 19 quasars in our sample are also in excellent agreement with the results of the joint maximum likelihood analysis.

  3. Determination of the size distribution of metallic nanoparticles by optical extinction spectroscopy

    Pena, Ovidio; Rodriguez-Fernandez, Luis; Rodriguez-Iglesias, Vladimir; Kellermann, Guinther; Crespo-Sosa, Alejandro; Cheang-Wong, Juan Carlos; Silva-Pereyra, Hector Gabriel; Arenas-Alatorre, Jesus; Oliver, Alicia

    2009-01-01

    A method is proposed to estimate the size distribution of nearly spherical metallic nanoparticles (NPs) from optical extinction spectroscopy (OES) measurements based on Mie's theory and an optimization algorithm. The described method is compared against two of the most widely used techniques for the task: transmission electron microscopy (TEM) and small-angle x-ray scattering (SAXS). The size distribution of Au and Cu NPs, obtained by ion implantation in silica and a subsequent thermal annealing in air, was determined by TEM, grazing-incidence SAXS (GISAXS) geometry, and our method, and the average radius obtained by all the three techniques was almost the same for the two studied metals. Concerning the radius dispersion (RD), OES and GISAXS give very similar results, while TEM considerably underestimates the RD of the distribution

  4. Determinants of physical activity promotion by smoking cessation advisors.

    Mas, Sébastien; Bernard, Paquito; Gourlan, Mathieu

    2018-05-17

    To investigate the cross-sectional association between personal physical activity (PA) level, Theory of Planned Behavior (TPB) constructs toward PA promotion, and PA promotion behavior among smoking cessation advisors. 149 smoking cessation advisors were invited to complete online questionnaires. Hypotheses were tested using Bayesian path analysis. Attitudes and perceived behavioral control (PBC) of smoking cessation advisors were related to PA promotion intentions; intentions were in turn related to PA promotion behaviors. Advisors' personal PA level was indirectly associated with PA promotion behaviors through PBC and PA promotion intentions. The TPB is a relevant theoretical framework with which to explore determinants of PA promotion behavior among smoking cessation advisors. The PA level of health care professionals may be linked to PA promotion behavior through some TPB constructs. Smoking cessation advisor training should include education on attitude development (e.g., PA benefits on smoking cessation), PBC (e.g., modality of PA prescription) and PA promotion intentions (e.g., goal setting). Smoking cessation advisors should also be encouraged to regularly practice PA in order to improve their PA promotion behaviors. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Association studies and legume synteny reveal haplotypes determining seed size in Vigna unguiculata

    Mitchell R Lucas

    2013-04-01

    Full Text Available Highly specific seed market classes for cowpea and other grain legumes exists because grain is most commonly cooked and consumed whole. Size, shape, color, and texture are critical features of these market classes and breeders target development of cultivars for market acceptance. Resistance to biotic and abiotic stresses that are absent from elite breeding material are often introgressed through crosses to landraces or wild relatives. When crosses are made between parents with different grain quality characteristics, recovery of progeny with acceptable or enhanced grain quality is problematic. Thus genetic markers for grain quality traits can help in pyramiding genes needed for specific market classes. Allelic variation dictating the inheritance of seed size can be tagged and used to assist the selection of large-seeded lines. In this work we applied SNP genotyping and knowledge of legume synteny to characterize regions of the cowpea genome associated with seed size. These marker-trait associations will enable breeders to use marker based selection approaches to increase the frequency of progeny with large seed. For ~800 samples derived from eight bi-parental populations, QTL analysis was used to identify markers linked to ten trait determinants. In addition, the population structure of 171 samples from the USDA core collection was identified and incorporated into a genome-wide association study which supported more than half of the trait-associated regions important in the bi-parental populations. Seven of the total ten QTL were supported based on synteny to seed size associated regions identified in the related legume soybean. In addition to delivering markers linked to major trait determinants in the context of modern breeding, we provide an analysis of the diversity of the USDA core collection of cowpea to identify genepools, migrants, admixture, and duplicates.

  6. Association Studies and Legume Synteny Reveal Haplotypes Determining Seed Size in Vigna unguiculata.

    Lucas, Mitchell R; Huynh, Bao-Lam; da Silva Vinholes, Patricia; Cisse, Ndiaga; Drabo, Issa; Ehlers, Jeffrey D; Roberts, Philip A; Close, Timothy J

    2013-01-01

    Highly specific seed market classes for cowpea and other grain legumes exist because grain is most commonly cooked and consumed whole. Size, shape, color, and texture are critical features of these market classes and breeders target development of cultivars for market acceptance. Resistance to biotic and abiotic stresses that are absent from elite breeding material are often introgressed through crosses to landraces or wild relatives. When crosses are made between parents with different grain quality characteristics, recovery of progeny with acceptable or enhanced grain quality is problematic. Thus genetic markers for grain quality traits can help in pyramiding genes needed for specific market classes. Allelic variation dictating the inheritance of seed size can be tagged and used to assist the selection of large seeded lines. In this work we applied 1,536-plex SNP genotyping and knowledge of legume synteny to characterize regions of the cowpea genome associated with seed size. These marker-trait associations will enable breeders to use marker-based selection approaches to increase the frequency of progeny with large seed. For 804 individuals derived from eight bi-parental populations, QTL analysis was used to identify markers linked to 10 trait determinants. In addition, the population structure of 171 samples from the USDA core collection was identified and incorporated into a genome-wide association study which supported more than half of the trait-associated regions important in the bi-parental populations. Seven of the total 10 QTLs were supported based on synteny to seed size associated regions identified in the related legume soybean. In addition to delivering markers linked to major trait determinants in the context of modern breeding, we provide an analysis of the diversity of the USDA core collection of cowpea to identify genepools, migrants, admixture, and duplicates.

  7. Litter size variation in hypothalamic gene expression determines adult metabolic phenotype in Brandt's voles (Lasiopodomys brandtii.

    Xue-Ying Zhang

    Full Text Available Early postnatal environments may have long-term and potentially irreversible consequences on hypothalamic neurons involved in energy homeostasis. Litter size is an important life history trait and negatively correlated with milk intake in small mammals, and thus has been regarded as a naturally varying feature of the early developmental environment. Here we investigated the long-term effects of litter size on metabolic phenotype and hypothalamic neuropeptide mRNA expression involved in the regulation of energy homeostasis, using the offspring reared from large (10-12 and small (3-4 litter sizes, of Brandt's voles (Lasiopodomys brandtii, a rodent species from Inner Mongolia grassland in China.Hypothalamic leptin signaling and neuropeptides were measured by Real-Time PCR. We showed that offspring reared from small litters were heavier at weaning and also in adulthood than offspring from large litters, accompanied by increased food intake during development. There were no significant differences in serum leptin levels or leptin receptor (OB-Rb mRNA in the hypothalamus at weaning or in adulthood, however, hypothalamic suppressor of cytokine signaling 3 (SOCS3 mRNA in adulthood increased in small litters compared to that in large litters. As a result, the agouti-related peptide (AgRP mRNA increased in the offspring from small litters.These findings support our hypothesis that natural litter size has a permanent effect on offspring metabolic phenotype and hypothalamic neuropeptide expression, and suggest central leptin resistance and the resultant increase in AgRP expression may be a fundamental mechanism underlying hyperphagia and the increased risk of overweight in pups of small litters. Thus, we conclude that litter size may be an important and central determinant of metabolic fitness in adulthood.

  8. [Particle size determination by radioisotope x-ray absorptiometry with sedimentation method].

    Matsui, Y; Furuta, T; Miyagawa, S

    1976-09-01

    The possibility of radioisotope X-ray absorptiometry to determine the particle size of powder in conjunction with sedimentation was investigated. The experimental accuracy was primarily determined by Cow and X-ray intensity. where Co'=weight concentration of the particle in the suspension w'=(micron/rho)l/(mu/rho)s-rhol/rhos rho; density micron/rho; mass absorption coefficient, suffix l and s indicate dispersion and particle, respectively. The radiosiotopes, Fe-55, Pu-238 and Cd-109 have high w-values over the wide range of the atomic number. However, a source of high micron value such as Fe-55 is not suitable because the optimal X-ray transmission length, Lopt is decided by the expression, micronlLopt approximately 2/(1+C'ow') by using Cd-109 AgKX-ray source, the weight size distribution of particles from the heavy elements such as PbO2 to light elements such as Al2O3 or flyash was determined.

  9. Ultrasonic delay measurements for the determination of the size of quasi-natural defects

    Proegler, H.

    1978-01-01

    Criteria in the form of delay measurements and phase assessments on ultrasonic pulses were worked out for a series of the most different reflection positions of the artificial, quasi-natural and natural kind which in many cases enable an differentiation of defects and the determination of the defect size. Even though it was not possible to completely clarify all effects occuring, such as reflection positions with undefined pulse orientations, the results sofar are still a contribution to the improvement of the stating ability of ultrasonic testing. (orig./RW) [de

  10. Changes in body size and physical characteristics of South African under-20 rugby union players over a 13-year period.

    Lombard, Wayne P; Durandt, Justin J; Masimla, Herman; Green, Mervin; Lambert, Michael I

    2015-04-01

    This study compared changes in the body size and physical characteristics of South African under-20 rugby union players over a 13-year period. A total of 453 South African under-20 players (forwards: n = 256 and backs: n = 197) underwent measurements of body mass, stature, muscular strength, endurance, and 10- and 40-m sprint times. A 2-way analysis of variance was used to determine significant differences for the main effects of position (forwards vs. backs) and time (1998-2010). The pooled data showed that forwards were significantly heavier (22%), taller (5%), and stronger (18%) than the backs. However, when 1 repetition maximum strength scores were adjusted for body mass, backs were stronger per kg body mass. Stature did not change over the 13-year period for both groups. There were, however, significant increases in muscular strength (50%), body mass (20%), and muscular endurance (50%). Furthermore, an improvement in sprint times over 40 (4%) and 10 m (7%) was evident over the period of the study. In conclusion, the players became heavier, stronger, taller, and improved their upper-body muscular endurance over the 13 years of the study. Furthermore, sprint times over 10 and 40 m improved over the same time period despite the increase in body mass. It can be speculated that the changes in physical characteristics of the players over time are possibly a consequence of (a) adaptations to the changing demands of the game and (b) advancements in training methods.

  11. Traceable size determination of PMMA nanoparticles based on Small Angle X-ray Scattering (SAXS)

    Gleber, G; Cibik, L; Mueller, P; Krumrey, M [Physikalisch-Technische Bundesanstalt (PTB), Abbestrasse 2-12, 10587 Berlin (Germany); Haas, S; Hoell, A, E-mail: gudrun.gleber@ptb.d [Helmholtz-Zentrum-Berlin fuer Materialien und Energie (HZB), Albert-Einstein-Strasse 15, 12489 Berlin (Germany)

    2010-10-01

    The size and size distribution of PMMA nanoparticles has been investigated with SAXS (small angle X-ray scattering) using monochromatized synchrotron radiation. The uncertainty has contributions from the wavelength or photon energy of the radiation, the scattering angle and the fit procedure for the obtained scattering curves. The wavelength can be traced back to the lattice constant of silicon, and the scattering angle is traceable via geometric measurements of the detector pixel size and the distance between the sample and the detector. SAXS measurements and data evaluations have been performed at different distances and photon energies for two PMMA nanoparticle suspensions with low polydispersity and nominal diameters of 108 nm and 192 nm, respectively, as well as for a mixture of both. The relative variation of the diameters obtained for different experimental conditions was below {+-} 0.3 %. The determined number-weighted mean diameters of (109.0 {+-} 0.7) nm and (188.0 {+-} 1.3) nm, respectively, are close to the nominal values.

  12. Traceable size determination of PMMA nanoparticles based on Small Angle X-ray Scattering (SAXS)

    Gleber, G.; Cibik, L.; Haas, S.; Hoell, A.; Müller, P.; Krumrey, M.

    2010-10-01

    The size and size distribution of PMMA nanoparticles has been investigated with SAXS (small angle X-ray scattering) using monochromatized synchrotron radiation. The uncertainty has contributions from the wavelength or photon energy of the radiation, the scattering angle and the fit procedure for the obtained scattering curves. The wavelength can be traced back to the lattice constant of silicon, and the scattering angle is traceable via geometric measurements of the detector pixel size and the distance between the sample and the detector. SAXS measurements and data evaluations have been performed at different distances and photon energies for two PMMA nanoparticle suspensions with low polydispersity and nominal diameters of 108 nm and 192 nm, respectively, as well as for a mixture of both. The relative variation of the diameters obtained for different experimental conditions was below ± 0.3 %. The determined number-weighted mean diameters of (109.0 ± 0.7) nm and (188.0 ± 1.3) nm, respectively, are close to the nominal values.

  13. Small-angle X-ray scattering (SAXS) for metrological size determination of nanoparticles

    Gleber, Gudrun; Krumrey, Michael; Cibik, Levent; Marggraf, Stefanie; Mueller, Peter [Physikalisch-Technische Bundesanstalt, Abbestr. 2-12, 10587 Berlin (Germany); Hoell, Armin [Helmholtz-Zentrum Berlin, Albert-Einstein-Str. 15, 12489 Berlin (Germany)

    2011-07-01

    To measure the size of nanoparticles, different measurement methods are available but their results are often not compatible. In the framework of an European metrology project we use Small-Angle X-ray Scattering (SAXS) to determine the size and size distribution of nanoparticles in aqueous solution, where the special challange is the traceability of the results. The experiments were performed at the Four-Crystal Monochromator (FCM) beamline in the laboratory of Physikalisch-Technische Bundesanstalt (PTB) at BESSY II using the SAXS setup of the Helmholtz-Zentrum Berlin (HZB). We measured different particles made of PMMA and gold in a diameter range of 200 nm down to about 10 nm. The aspects of traceability can be classified in two parts: the first is the experimental part with the uncertainties of distances, angles, and wavelength, the second is the part of analysis, with the uncertainty of the choice of the model used for fitting the data. In this talk we want to show the degree of uncertainty, which we reached in this work yet.

  14. Traceable size determination of PMMA nanoparticles based on Small Angle X-ray Scattering (SAXS)

    Gleber, G; Cibik, L; Mueller, P; Krumrey, M; Haas, S; Hoell, A

    2010-01-01

    The size and size distribution of PMMA nanoparticles has been investigated with SAXS (small angle X-ray scattering) using monochromatized synchrotron radiation. The uncertainty has contributions from the wavelength or photon energy of the radiation, the scattering angle and the fit procedure for the obtained scattering curves. The wavelength can be traced back to the lattice constant of silicon, and the scattering angle is traceable via geometric measurements of the detector pixel size and the distance between the sample and the detector. SAXS measurements and data evaluations have been performed at different distances and photon energies for two PMMA nanoparticle suspensions with low polydispersity and nominal diameters of 108 nm and 192 nm, respectively, as well as for a mixture of both. The relative variation of the diameters obtained for different experimental conditions was below ± 0.3 %. The determined number-weighted mean diameters of (109.0 ± 0.7) nm and (188.0 ± 1.3) nm, respectively, are close to the nominal values.

  15. Automatic determination of the size of elliptical nanoparticles from AFM images

    Sedlář, Jiří; Zitová, Barbara; Kopeček, Jaromír; Flusser, Jan; Todorciuc, Tatiana; Kratochvílová, Irena

    2013-01-01

    The objective of this work was to develop an accurate method for automatic determination of the size of elliptical nanoparticles from atomic force microscopy (AFM) images that would yield results consistent with results of manual measurements by experts. The proposed method was applied on phenylpyridyldiketopyrrolopyrrole (PPDP), a granular organic material with a wide scale of application and highly sensitive particle-size properties. A PPDP layer consists of similarly sized elliptical particles (c. 100 nm × 50 nm) and its properties can be estimated from the average length and width of the particles. The developed method is based on segmentation of salient particles by the watershed transform and approximation of their shapes by ellipses computed by image moments; it estimates the lengths and widths of the particles by the major and minor axes, respectively, of the corresponding ellipses. Its results proved to be consistent with results of manual measurements by a trained expert. The comparison showed that the developed method could be used in practice for precise automatic measurement of PPDP particles in AFM images

  16. A 'range test' for determining scatterers with unknown physical properties

    Potthast, Roland; Sylvester, John; Kusiak, Steven

    2003-06-01

    We describe a new scheme for determining the convex scattering support of an unknown scatterer when the physical properties of the scatterers are not known. The convex scattering support is a subset of the scatterer and provides information about its location and estimates for its shape. For convex polygonal scatterers the scattering support coincides with the scatterer and we obtain full shape reconstructions. The method will be formulated for the reconstruction of the scatterers from the far field pattern for one or a few incident waves. The method is non-iterative in nature and belongs to the type of recently derived generalized sampling schemes such as the 'no response test' of Luke-Potthast. The range test operates by testing whether it is possible to analytically continue a far field to the exterior of any test domain Omegatest. By intersecting the convex hulls of various test domains we can produce a minimal convex set, the convex scattering support of which must be contained in the convex hull of the support of any scatterer which produces that far field. The convex scattering support is calculated by testing the range of special integral operators for a sampling set of test domains. The numerical results can be used as an approximation for the support of the unknown scatterer. We prove convergence and regularity of the scheme and show numerical examples for sound-soft, sound-hard and medium scatterers. We can apply the range test to non-convex scatterers as well. We can conclude that an Omegatest which passes the range test has a non-empty intersection with the infinity-support (the complement of the unbounded component of the complement of the support) of the true scatterer, but cannot find a minimal set which must be contained therein.

  17. TESTING THE GRAIN-SIZE DISTRIBUTION DETERMINED BY LASER DIFFRACTOMETRY FOR SICILIAN SOILS

    Costanza Di Stefano

    2012-06-01

    Full Text Available In this paper the soil grain-size distribution determined by Laser Diffraction method (LDM is tested using the Sieve-Hydrometer method (SHM applied for 747 soil samples representing a different texture classification, sampled in Sicily. 005_Di_Stefano(599_39 28-12-2011 15:01 Pagina 45 The analysis showed that the sand content measured by SHM can be assumed equal to the one determined by LDM. An underestimation of the clay fraction measured by LDM was obtained with respect to the SHM and a set of equations useful to refer laser diffraction measurements to SHM was calibrated using the measurements carried out for 635 soil samples. Finally, the proposed equations were tested using independent measurements carried out by LDM and SHM for 112 soil samples with a different texture classification.

  18. Comparison of the free volume sizes and shapes determined from crystallographic and PALS data

    Tydda Maciej

    2015-12-01

    Full Text Available Two different classes of molecular crystals were investigated. The first group was benzenediols, which are characterized by the same chemical composition but a different organization of their crystallographic structures; all of the compounds from this group have only one kind of free volumes. The second class was represented by olanzapine, which has more complex chemical composition and two kinds of free volumes in the structure. The o-Ps lifetime values determined from positron annihilation lifetime spectroscopy (PALS measurements agree quite well with those calculated for sizes found from crystallographic data for benzenediols (agreement within 10% of the lifetime values. For olanzapine, a good agreement is observed in the case of cuboidal free volumes, while for the other kind of void, the agreement is less satisfactory. Positronium diffusion coefficient determined from o-Ps redistribution in olanzapine agrees with these found for polymers.

  19. Alberta's Tomorrow Project: adherence to cancer prevention recommendations pertaining to diet, physical activity and body size.

    Whelan, Heather K; Xu, Jian-Yi; Vaseghi, Sanaz; Lo Siou, Geraldine; McGregor, S Elizabeth; Robson, Paula J

    2017-05-01

    To explore cross-sectional adherence to cancer prevention recommendations by adults enrolled in a prospective cohort in Alberta, Canada. Questionnaire data were used to construct a composite cancer prevention adherence score for each participant, based on selected personal recommendations published by the World Cancer Research Fund/American Institute for Cancer Research (2007). Data were self-reported on health and lifestyle, past-year physical activity and past-year FFQ. The scores accounted for physical activity, dietary supplement use, body size, and intakes of alcohol, fruit, vegetables and red meat. Tobacco exposure was also included. Scores ranged from 0 (least adherent) to 7 (most adherent). Alberta's Tomorrow Project; a research platform based on a prospective cohort. Adult men and women (n 24 988) aged 35-69 years recruited by random digit dialling and enrolled in Alberta's Tomorrow Project between 2001 and 2009. Of the cohort, 14 % achieved adherence scores ≥5 and 60 % had scores ≤3. Overall adherence scores were higher in women (mean (sd): 3·4 (1·1)) than in men (3·0 (1·2)). The extent of overall adherence was also associated with level of education, employment status, annual household income, personal history of chronic disease, family history of chronic disease and age. Reported adherence to selected personal recommendations for cancer prevention was low in this cohort of adults. In the short to medium term, these results suggest that more work is required to identify behaviours to target with cancer prevention strategies at a population level. Future work will explore the associations between adherence scores and cancer risk in this cohort.

  20. Determinants of Physical Activity in Middle School Children.

    Trost, Stewart G.; Saunders, Ruth; Ward, Dianne S.

    2002-01-01

    Evaluated the theory of reasoned action (TRA) and theory of planned behavior (TPB) in predicting moderate-to-vigorous physical activity (MVPA) in sixth grade students. Student surveys on physical activity behavior and attitudes and measurement of MVPA indicated that the TRA and TPB accounted for only a small percentage of the variance in MVPA. (SM)

  1. What Factors Determine the Uptake of A-Level Physics?

    Gill, Tim; Bell, John F.

    2013-01-01

    There has been much concern recently in the UK about the decline in the number of students studying physics beyond age 16. To investigate why this might be we used data from a national database of student qualifications and a multilevel modelling technique to investigate which factors had the greatest impact on the uptake of physics at Advanced…

  2. Antibody-dendrimer conjugates: the number, not the size of the dendrimers, determines the immunoreactivity.

    Wängler, C; Moldenhauer, G; Eisenhut, M; Haberkorn, U; Mier, W

    2008-04-01

    Radioimmunotherapy using antibodies with favorable tumor targeting properties and high binding affinity is increasingly applied in cancer therapy. The potential of this valuable cancer treatment modality could be further improved by increasing the specific activity of the labeled proteins. This can be done either by coupling a large number of chelators which leads to a decreased immunoreactivity or by conjugating a small number of multimeric chelators. In order to systematically investigate the influence of conjugations on immunoreactivity with respect to size and number of the conjugates, the anti-EGFR antibody hMAb425 was reacted with PAMAM dendrimers of different size containing up to 128 chelating agents per conjugation site. An improved dendrimer synthesis protocol was established to obtain compounds of high homogeneity suitable for the formation of defined protein conjugates. The quantitative derivatization of the PAMAM dendrimers with DOTA moieties and the characterization of the products by isotopic dilution titration using (111)In/(nat)In are shown. The DOTA-containing dendrimers were conjugated with high efficiency to hMAb425 by applying Sulfo-SMCC as cross-linking agent and a 10- to 25-fold excess of the thiol-containing dendrimers. The determination of the immunoreactivities of the antibody-dendrimer conjugates by FACS analysis revealed a median retained immunoreactivity of 62.3% for 1.7 derivatization sites per antibody molecule, 55.4% for 2.8, 27.9% for 5.3, and 17.1% for 10.0 derivatization sites per antibody but no significant differences in immunoreactivity for different dendrimer sizes. These results show that the dendrimer size does not influence the immunoreactivity of the derivatized antibody significantly over a wide molecular weight range, whereas the number of derivatization sites has a crucial effect.

  3. Determination of the particle size distribution in a powder using radiotracers

    Revilla D, R.

    1974-01-01

    To determine experimentally the particle size distribution in a powder the meshed method is generally used. This method has the disadvantage that in the obtained distribution is not observed at detail the fine structure of such distribution. In this work, a method for obtaining the distribution of particle size using radiotracers is presented. In the obtained distribution by this method it is observed with more detail the fine structure of the distribution, comparing with the obtained results by the classical method of meshed. The radiotracer method has major resolution for the experimental determination mentioned. In the chapter 1, it is done a brief analysis about theoretical aspects related with the method. In the first part it is analysed the particle behavior (sedimenting) in a fluid. The second part treats the relating with the radioactivity of an activated material as well as its detection. In the chapter 2, a description of the method is done also the experimental problems to applying to the alumina crystals sample are discussed. In the chapter 3 the obtained results and the mistake calculations in such results are showed. Finally, in the chapter 4 the conclusions and recommendations are given which is possible to obtain better results and improve to those in this work were obtained. (Author)

  4. Porosity and pore size distribution determination of Tumblagooda formation sandstone by X-ray microtomography

    Fernandes, Jaquiel S.; Appoloni, Carlos R.; Moreira, Anderson C.

    2007-01-01

    Microstructural parameters evaluations of reservoir rocks are very important to petroleum industry. This work presents total porosity and pore size distribution measurement of a sandstone sample from the Tumblagooda formation, collected at Kalbarri National Park in Australia. Porosity and pores size distribution were determined using X-Ray microtomography and imaging techniques. For these measurements, it was employed a micro-CT (μ-CT) Skyscan system model 1172 with conical beam, operated with a 1 mm Al filter at 80 kV and 125 μA, respectively, and a 2000 x 1048 pixels CCD camera. The sample was rotated from 0 deg to 180 deg, in step of 0.5 deg. For the considered sample, this equipment provided images with 2.9 μm spatial resolution. Six hundreds 2-D images where reconstructed with the Skyscan NRecon software, which were analyzed with the aid of Imago software, developed at the Laboratory of Porous Media and Thermophysical Properties (LMPT), Department of Mechanical Engineering, Federal University of Santa Catarina, Brazil, in association with the Brazilian software company Engineering Simulation and Scientific Software (ESSS), and Petroleo Brasileiro SA (PETROBRAS) Research and Development Center (CENPES). The determined average porosity was 11.45 ±1.53 %. Ninety five percent of the porous phase refers to pores with radius ranging from 2.9 to 85.2 μm, presenting the larger frequency (7.7 %) at 11.7 μm radius. (author)

  5. Determining an Estimate of an Equivalence Relation for Moderate and Large Sized Sets

    Leszek Klukowski

    2017-01-01

    Full Text Available This paper presents two approaches to determining estimates of an equivalence relation on the basis of pairwise comparisons with random errors. Obtaining such an estimate requires the solution of a discrete programming problem which minimizes the sum of the differences between the form of the relation and the comparisons. The problem is NP hard and can be solved with the use of exact algorithms for sets of moderate size, i.e. about 50 elements. In the case of larger sets, i.e. at least 200 comparisons for each element, it is necessary to apply heuristic algorithms. The paper presents results (a statistical preprocessing, which enable us to determine the optimal or a near-optimal solution with acceptable computational cost. They include: the development of a statistical procedure producing comparisons with low probabilities of errors and a heuristic algorithm based on such comparisons. The proposed approach guarantees the applicability of such estimators for any size of set. (original abstract

  6. Factors that influence planning for physical activity among workers in small- and medium-sized enterprises.

    Kawahara, Sawako; Tadaka, Etsuko; Okochi, Ayako

    2018-06-01

    Physical activity (PA) is necessary for improving the health of workers in small- to medium-sized enterprises (SMEs). However, behavioral changes conducive to PA are often difficult to achieve despite intentions. Because intention to perform PA does not always translate to action, proper planning may be critical for achieving PA. In this study, we aimed to identify factors related to planning for PA among workers in SMEs because this is one population that has been identified as being at higher risk for lifestyle-related diseases in Japan. Participants completed a series of validated questionnaires. Of 353 valid responses, 226 individuals (149 men; aged 47.5 ± 8.7 years) stated their intention to perform PA. Multiple regression analysis indicated that a higher PA planning score was significantly associated with higher self-efficacy for PA ( p  < 0.001), higher risk perception regarding inactivity ( p  = 0.012), and greater knowledge of information about PA community services ( p  = 0.019). Therefore, we recommend that self-efficacy, risk perception, and information regarding PA community services are enhanced in the daily working lives of workers at their workplaces. In this manner, they can promote their planning of health behavioral changes in a supportive environment, drawing upon available services, supports, and other resources.

  7. Physical-chemical model for cellular uptake of fatty acids: prediction of intracellular pool sizes

    Cooper, R.; Noy, N.; Zakim, D.

    1987-01-01

    If the uptake of fatty acids by liver is a physical, not a biological, process, then the size and location of the intrahepatic pool of fatty acids can be predicted from uptake rates and thermodynamic data. The purpose of the experiments in this paper was to test the accuracy of this idea. Rat livers were perfused with [ 3 H] palmitate bound to [ 14 C] albumin, and the total amounts of palmitate removed from the perfusate were measured at 3-s intervals. The intrahepatic pools of palmitate calculated from these data were 13.8 and 23.0 nmol/g of liver at ratios of palmitate/albumin (mol/mol) (afferent side) of 2/1 and 4/1, respectively, in the steady state. The intrahepatic pools of palmitate calculated from the distributions of palmitate between membranes, H 2 O, albumin, and fatty acid binding protein and the measured first-order rate constants for acyl-CoA ligases in mitochondria and microsomes were 12.1 and 34.6 nmol/g for perfusate ratios of palmitate/albumin of 2/1 and 4/1, in the steady state. Intrahepatic pools of palmitate measured after establishment of a steady-state rate of uptake were 15.0 and 31.8 nmol/g for these ratios of palmitate/albumin of 2/1 and 4/1

  8. The size of chi = arg (-Vts Vtb* Vcs* Vcb) and physics beyond the Standard Model

    Aguilar-Saavedra, J A; Branco, Gustavo Castello; Nebot, M

    2004-01-01

    We analyse the allowed range of values of chi, both in the Standard Model and in models with New Physics, pointing out that a relatively large value of chi, e.g. of order lambda, is only possible in models where the unitarity of the 3x3 Cabibbo-Kobayashi-Maskawa matrix is violated through the introduction of extra Q=2/3 quarks. We study the interesting case where the extra quark is an isosinglet, determining the allowed range for chi and the effect of a large chi on various low-energy observables, such as CP asymmetries in B meson decays. We also discuss the correlated effects which would be observable at high energy colliders, like decays t -> cZ, modifications of the cross section and forward-backward asymmetry in e+ e- -> ttbar and the direct production of a new quark.

  9. The Determinants and the Size of International Migration in Central and Eastern Europe After 2004

    Organiściak-Krzykowska Anna

    2017-12-01

    Full Text Available Migration is a very important socio‑economic issue in the contemporary world. One of the interesting and pertinent research problems worth considering concerns the scale and nature of migration from countries which entered the European Union in 2004 and in the subsequent years. As a result of integration within the European Community, the citizens of member states acquired citizenship within the entire European Union (which is complementary to citizenship in the country of origin. The right of free movement led to the emergence of the migration phenomenon within the territory of the European Union. A well educated and young labour force may be an influential factor in the social and economic development of the European Union members. The enlargement of the EU led to a significant increase in the number of part‑time/temporary migrants. According to statistical data, the number of emigrants from the Central and Eastern European Countries (CEE to the more prosperous European countries increased from 1,66 million in 2004 to 7,3 million in 2016. Within the context of the scale of economic migration from the CEE, questions should be asked about the determinants and economic consequences of this mobility. The main objective of this article is a diagnosis and evaluation of the determinants and size of migration from the CEE. The analyses are based on Eurostat data. The determinants of migration are presented from the point of view of the push and pull factors theory and related to the situation in the European labour market. An analysis of the size of migration outflow from the CEE countries made it possible to classify them into three groups: countries with a high emigration potential (Latvia, Lithuania, Romania, a moderate emigration potential (Hungary, Bulgaria, Poland, Estonia, Slovakia and a low emigration potential (the Czech Republic, Slovenia. The economic consequences of migration are shown from the perspective of remittances received from

  10. Magnitude and determinants of physical inactivity in Ethiopia ...

    user

    A mix of sampling approach namely stratified, three-stage cluster sampling, simple random sampling and Kish ... provide concrete picture on the state of NCDs in. Ethiopia. .... Measurement and Operational definitions. Assessing physical ...

  11. What Factors Determine the Uptake of A-level Physics?

    Gill, Timothy; Bell, John F

    2011-01-01

    Abstract There has been much concern recently in the UK about the decline in the number of students studying physics beyond age 16. To investigate why this might be we used data from a national database of student qualifications and a multilevel modelling technique to investigate which factors had the greatest impact on the uptake of physics at Advanced Level (A-level) in a particular year. Each factor of interest was entered into a separate model, whilst accounting for prior attai...

  12. Determination of first year students’ physical condition and physical fitness level

    V.G. Fotynyuk

    2017-06-01

    Full Text Available Purpose: to study and find out first year students’ physical condition and physical fitness levels. Material: In the research first year students (n=86 participated. The age of the participants was 16 - 19 years. They passed the following tests for physical fitness: 100 meters’ run; run during 12 minutes; long jump from the spot; chin ups; torso rising from lying to sitting position during 1 minute; forward torso bending from sitting position, cm. Results: it was found that 41% of students have low and below average levels of physical condition and 76.35% - the same physical fitness level (unsatisfactory. So we came to conclusion that it was necessary to review the existing approaches to physical education system. It is recommended to increase the volume of compulsory classes of students’ motor functioning at the cost of the following: usage of optional classes; physical exercises’ practicing in free time; everyday motor activity in the form of morning exercises and sport games. Conclusions: the main reasons of students’ physical condition and physical fitness weakening during their studying are: restricted quantity of academic physical education classes; absence of students’ demand in systemic physical exercises’ practicing; students’ low motivation for physical education; absence of interest in physical exercises’ practicing in free time; students’ health worsening before entering higher educational establishment; imperfectness of school physical education.

  13. Determinants and benefits of physical activity maintenance in hospital employees.

    Lavoie-Tremblay, Mélanie; Sounan, Charles; Martin, Kara; Trudel, Julie G; Lavigne, Genevieve L; Grover, Steven A; Lowensteyn, Ilka

    2014-01-01

    This study investigated whether the positive behavioral and anthropometric outcomes of a pedometer-based physical activity 8-week challenge were maintained 6 months after the end of the program. It further investigated the motivational profile of those who maintained their physical activity levels in the months following the end of the program and of those who did not. Hospital employees from a university-affiliated multisite health care center in Canada participated using a questionnaire. Of the 235 participants who completed the 8-week challenge, 157 questionnaires were returned 6 months later. Paired-samples t tests were conducted between the baseline and follow-up scores as well as between the postprogram and follow-up scores to detect significant differences between the measurement points. This study shows that the pedometer-based physical activity helped hospital employees maintain a high level of physical activity as well as maintain a healthy body mass index after 6 months. The results demonstrated that during maintenance the high physical activity group obtained higher scores for identified regulation and intrinsic regulation compared with the other groups. The results of the study revealed that identified and intrinsic regulations are important contributors to maintaining physical activity among hospital employees.

  14. Food size spectra, ingestion and growth of the copepod Acartia tonsa during development: implications for the determination of copepod production

    Berggren, U.; Hansen, B.; Kiørboe, Thomas

    1988-01-01

    Clearance rates on different sizes of spherically shaped algae were determined in uni-algal experiments for all developmental stages (NII through adult) of the copepodAcartia tonsa, and used to construct food size spectra. Growth and developmental rates were determined at 7 food levels (0 to 1 500...... g C l-1 ofRhodomonas baltica). The lower size limit for particle capture was between 2 and 4 m for all developmental stages. Optimum particle size and upper size limit increased during development from 7 m and 10 to 14 m for NII to NIII to 14 to 70 m and 250 m for adults, respectively. When food...... size spectra were normalized (percent of maximum clearance in a particular stage versus particle diameter/prosome length) they resembled log-normal distributions with near constant width (variance). Optimum, relative particle sizes corresponded to 2 to 5% of prosome length independent of developmental...

  15. What Factors Determine the Uptake of A-level Physics?

    Gill, Tim; Bell, John F.

    2013-03-01

    There has been much concern recently in the UK about the decline in the number of students studying physics beyond age 16. To investigate why this might be we used data from a national database of student qualifications and a multilevel modelling technique to investigate which factors had the greatest impact on the uptake of physics at Advanced Level (A-level) in a particular year. Each factor of interest was entered into a separate model, while accounting for prior attainment and gender (both well-known predictors of A-level uptake). We found that factors associated with greater probability of uptake included better attainment in physics (or combined science) and maths qualifications at age 16 in comparison to other subjects, and (for girls only) attending an independent or grammar school. While it is difficult to address these factors directly, the results imply that more needs to be done to improve relative performance at General Certificate of Secondary Education, perhaps by increasing the supply of specialist physics teachers at this level and to overcome the perception (especially among girls) that physics is a particularly difficult subject.

  16. Using harmonic oscillators to determine the spot size of Hermite-Gaussian laser beams

    Steely, Sidney L.

    1993-01-01

    The similarity of the functional forms of quantum mechanical harmonic oscillators and the modes of Hermite-Gaussian laser beams is illustrated. This functional similarity provides a direct correlation to investigate the spot size of large-order mode Hermite-Gaussian laser beams. The classical limits of a corresponding two-dimensional harmonic oscillator provide a definition of the spot size of Hermite-Gaussian laser beams. The classical limits of the harmonic oscillator provide integration limits for the photon probability densities of the laser beam modes to determine the fraction of photons detected therein. Mathematica is used to integrate the probability densities for large-order beam modes and to illustrate the functional similarities. The probabilities of detecting photons within the classical limits of Hermite-Gaussian laser beams asymptotically approach unity in the limit of large-order modes, in agreement with the Correspondence Principle. The classical limits for large-order modes include all of the nodes for Hermite Gaussian laser beams; Sturm's theorem provides a direct proof.

  17. Determinants of Supply and Demand for Trade Credit by Micro, Small and Medium-Sized Enterprises

    Claudinê Jordão de Carvalho

    2015-08-01

    Full Text Available This article investigates the determinant factors of supply and demand for trade credit by micro, small and medium-sized enterprises (MSMEs, using data collected in a survey of managers from 481 firms in 32 cities in the states of São Paulo and Minas Gerais (Brazil between 2008 and 2010. The multivariate relationship model proposed here is grounded in trade credit, agency and transaction costs theories. This study is based on a technique known as path analysis that uses a system of simple regressions estimated by simultaneous equations. The main results show the following: (i trade credit and short-term bank loans are supplementary (and not substitute sources of funds for MSMEs, which demonstrates that trade credit can be used by financial institutions as an indicator of the creditworthiness of the company; (ii the proportion of credit sales, the days sales outstanding measure and sales growth are positively related to the amount of trade credit demanded, which suggests that trade credit is transferred along the supply chain; and (iii the supply of trade credit is positively related to the importance that management ascribes to both internal capital and bank credit, which illustrates the strategic use of the supply of trade credit to increase sales. These results have important implications for companies' managers, financial institutions and the government agencies responsible for formulating policies that support and promote the development of small and medium-sized enterprises.

  18. Microstructural characterization of XLPE electrical insulation in power cables: determination of void size distributions using TEM

    Markey, L; Stevens, G C

    2003-01-01

    In an effort to progress in our understanding of the ageing mechanisms of high voltage cables submitted to electrical and thermal stresses, we present a quantitative study of voids, the defects which are considered to be partly responsible for cable failure. We propose a method based on large data sets of transmission electron microscopy (TEM) observations of replicated samples allowing for the determination of void concentration distribution as a function of void size in the mesoscopic to microscopic range at any point in the cable insulation. A theory is also developed to calculate the effect of etching on the apparent size of the voids observed. We present the first results of this sort ever obtained on two industrial cables, one of which was aged in an AC field. Results clearly indicate that a much larger concentration of voids occur near the inner semiconductor compared to the bulk of the insulation, independently of ageing. An effect of ageing can also be seen near the inner semiconductor, resulting in an increase in the total void internal surface area and a slight shift of the concentration curve towards larger voids, with the peak moving from about 40 nm to about 50 nm

  19. MR of the pituitary in patients with Prader-Willi syndrome: size determination and imaging findings

    Miller, L. [Dept. of Radiology, Winthrop University Hospital, Mineola, NY (United States); Angulo, M. [Dept. of Pediatrics, Div. of Endocrinology and Genetics, Winthrop University Hospital, Mineola, NY (United States); Price, D. [Dept. of Radiology, Winthrop University Hospital, Mineola, NY (United States); Taneja, S. [Dept. of Radiology, Winthrop University Hospital, Mineola, NY (United States)

    1996-01-01

    Prader-Willi syndrome (PWS) is an unusual genetic disorder characterized by short stature, obesity, hypogonadism, hypotonia, cognitive impairment, and dysmorphic facies. There is an interstitial deletion of the proximal long arm of chromosome 15 in about 70% of patients. Some of these clinical features suggest a central hypothalamic/pituitary dysfunction, and recent investigations have demonstrated a marked impairment in spontaneous growth hormone (GH) secretion. We studied 15 GH-deficient PWS patients by magnetic resonance imaging (MRI) to determine whether there was a diminution in the gross morphological size of the anterior pituitary gland, the site of GH synthesis. We also set out to catalog the pertinent imaging findings in this patient population. Our results indicate that this is the first report documenting pituitary size by MRI in PWS patients. No statistically significant difference was found in the height of the anterior pituitary gland in PWS patients compared with either normal children or children with isolated GH deficiency. An interesting imaging finding is that three of 15 patients (20%) demonstrated complete absence of the posterior pituitary bright spot (PPBS), and a fourth patient demonstrated a small PPBS. These observations reflect an objective physiologic disturbance in the hypothalamus. The clinical and radiologic implications of these findings are discussed. (orig.)

  20. SPONTANEOUS INITIATION OF DETONATIONS IN WHITE DWARF ENVIRONMENTS: DETERMINATION OF CRITICAL SIZES

    Seitenzahl, Ivo R.; Meakin, Casey A.; Townsley, Dean M.; Truran, James W.; Lamb, Don Q.

    2009-01-01

    Some explosion models for Type Ia supernovae (SNe Ia), such as the gravitationally confined detonation (GCD) or the double detonation sub-Chandrasekhar (DDSC) models, rely on the spontaneous initiation of a detonation in the degenerate 12 C/ 16 O material of a white dwarf (WD). The length scales pertinent to the initiation of the detonation are notoriously unresolved in multidimensional stellar simulations, prompting the use of results of one-dimensional simulations at higher resolution, such as those performed for this work, as guidelines for deciding whether or not conditions reached in the higher dimensional full star simulations successfully would lead to the onset of a detonation. Spontaneous initiation relies on the existence of a suitable gradient in self-ignition (induction) times of the fuel, which we set up with a spatially localized nonuniformity of temperature-a hot spot. We determine the critical (smallest) sizes of such hot spots that still marginally result in a detonation in WD matter by integrating the reactive Euler equations with the hydrodynamics code FLASH. We quantify the dependences of the critical sizes of such hot spots on composition, background temperature, peak temperature, geometry, and functional form of the temperature disturbance, many of which were hitherto largely unexplored in the literature. We discuss the implications of our results in the context of modeling of SNe Ia.

  1. ALFY-Controlled DVL3 Autophagy Regulates Wnt Signaling, Determining Human Brain Size.

    Rotem Kadir

    2016-03-01

    Full Text Available Primary microcephaly is a congenital neurodevelopmental disorder of reduced head circumference and brain volume, with fewer neurons in the cortex of the developing brain due to premature transition between symmetrical and asymmetrical cellular division of the neuronal stem cell layer during neurogenesis. We now show through linkage analysis and whole exome sequencing, that a dominant mutation in ALFY, encoding an autophagy scaffold protein, causes human primary microcephaly. We demonstrate the dominant effect of the mutation in drosophila: transgenic flies harboring the human mutant allele display small brain volume, recapitulating the disease phenotype. Moreover, eye-specific expression of human mutant ALFY causes rough eye phenotype. In molecular terms, we demonstrate that normally ALFY attenuates the canonical Wnt signaling pathway via autophagy-dependent removal specifically of aggregates of DVL3 and not of Dvl1 or Dvl2. Thus, autophagic attenuation of Wnt signaling through removal of Dvl3 aggregates by ALFY acts in determining human brain size.

  2. Study of the size effect by accurately determining the crystal parameters

    Seguin, Remy

    1973-01-01

    The size factor η = da/adC was measured by comparing the variations in the crystal parameter as a function of the concentration, samples of Al of various degrees of purity and Al - V and Al - Cu alloys with concentrations of less than 1 000 ppm being used. The results confirm the experimental results obtained with alloys supersaturated by ultra-rapid tempering but are not consistent with theoretical values, which appear to be too large for the case of transition elements in solution in Al. The parameter was determined from Kossel diagrams obtained using an electron probe microanalyzer. The measurement methods were developed and generalized by plotting curves representing the variation of the parameter as a function of temperature between 20 and 60 deg. C. Values were obtained for the parameter at given temperatures (± 0.1 deg. C) with an accuracy of Δa/a ≅ 8.10 -6 . (author) [fr

  3. ANN modelling for the determination of moulding sand matrix grain size

    J. Jakubski

    2011-10-01

    Full Text Available One of the modern methods of the production optimisation are artificial neural networks. Neural networks are gaining broader and broader application in the foundry industry, among others for controlling melting processes in cupolas and in arc furnaces, for designing castings and supply systems, for controlling moulding sand processing, for predicting properties of cast alloys or selecting parameters of pressure castings. An attempt to apply neural networks for controlling the quality of bentonite moulding sands is presented in this paper. This is the assessment method of sands suitability by means of detecting correlations between their individual parameters. The presented investigations were obtained by using the Statistica 9.0 program. The aim of the investigations was to select the neural network suitable for prediction the moulding sand matrix grain size on the basis of the determined sand properties such as: permeability, compactibility, and compressive strength.

  4. Neutral axis determination of full size concrete structures using coda wave measurements

    Jiang, Hanwan; Zhan, Hanyu; Zhuang, Chenxu; Jiang, Ruinian

    2018-03-01

    Coda waves experiencing multiple scattering behaviors are sensitive to weak changes occurring in media. In this paper, a typical four-point bending test with varied external loads is conducted on a 30-meter T-beam that is removed from a bridge after being in service for 15 years, and the coda wave signals are collected with a couple of sources-receivers pairs. Then the observed coda waves at different loads are compared to calculate their relative velocity variations, which are utilized as the parameter to distinct the compression and tensile zones as well as determine the neutral axis position. Without any prior knowledge of the concrete beam, the estimated axis position agrees well with the associated strain gage measurement results, and the zones bearing stress and tension behaviors are indicated. The presented work offers significant potential for Non-Destructive Testing and Evaluation of full-size concrete structures in future work.

  5. Cardiovascular risk profile: Cross-sectional analysis of motivational determinants, physical fitness and physical activity

    Gerjo Kok; Drs. Barbara Sassen; Drs. Henri Kiers; Herman Schaalma; Prof. Dr. Luc L.E.M.J. Vanhees

    2010-01-01

    Background: Cardiovascular risk factors are associated with physical fitness and, to a lesser extent, physical activity. Lifestyle interventions directed at enhancing physical fitness in order to decrease the risk of cardiovascular diseases should be extended. To enable the development of effective

  6. Individual and Instructional Determinants of Student Engagement in Physical Education

    Bevans, Katherine; Fitzpatrick, Leslie-Anne; Sanchez, Betty; Forrest, Christopher B.

    2012-01-01

    This study was conducted to identify student characteristics and instructional factors that impact student engagement in physical education (PE). Data were derived from the systematic observation of 124 sessions taught by 31 physical educators and the administration of health and PE engagement questionnaires to 2,018 students in grades 5–8. Physical activity was directly affected by student engagement and perceived competence in PE and indirectly affected by students’ body image through its association with PE engagement. Multilevel analyses revealed that the proportion of class time devoted to game play was negatively associated with student engagement in PE. Although less frequently used during PE sessions, skill practice was positively associated with student engagement and inactive instruction was negatively associated with student engagement. These effects were particularly pronounced among students with poor competence beliefs. Implications for PE instructional practice and future research are presented. PMID:22844176

  7. Carpel size, grain filling, and morphology determine individual grain weight in wheat.

    Xie, Quan; Mayes, Sean; Sparkes, Debbie L

    2015-11-01

    Individual grain weight is a major yield component in wheat. To provide a comprehensive understanding of grain weight determination, the carpel size at anthesis, grain dry matter accumulation, grain water uptake and loss, grain morphological expansion, and final grain weight at different positions within spikelets were investigated in a recombinant inbred line mapping population of bread wheat (Triticum aestivum L.)×spelt (Triticum spelta L.). Carpel size, grain dry matter and water accumulation, and grain dimensions interacted strongly with each other. Furthermore, larger carpels, a faster grain filling rate, earlier and longer grain filling, more grain water, faster grain water absorption and loss rates, and larger grain dimensions were associated with higher grain weight. Frequent quantitative trait locus (QTL) coincidences between these traits were observed, particularly those on chromosomes 2A, 3B, 4A, 5A, 5DL, and 7B, each of which harboured 16-49 QTLs associated with >12 traits. Analysis of the allelic effects of coincident QTLs confirmed their physiological relationships, indicating that the complex but orderly grain filling processes result mainly from pleiotropy or the tight linkages of functionally related genes. After grain filling, distal grains within spikelets were smaller than basal grains, primarily due to later grain filling and a slower initial grain filling rate, followed by synchronous maturation among different grains. Distal grain weight was improved by increased assimilate availability from anthesis. These findings provide deeper insight into grain weight determination in wheat, and the high level of QTL coincidences allows simultaneous improvement of multiple grain filling traits in breeding. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  8. Selective determination of dopamine using quantum-sized gold nanoparticles protected with charge selective ligands

    Kwak, Kyuju; Kumar, S. Senthil; Lee, Dongil

    2012-06-01

    We report here the selective determination of dopamine (DA) using quantum-sized gold nanoparticles coated with charge selective ligands. Glutathione protected gold nanoparticles (GS-Au25) were synthesized and immobilized into a sol-gel matrix via thiol linkers. The GS-Au25 modified sol-gel electrode was found to show excellent electrocatalytic activity towards the oxidation of DA but no activity towards the oxidation of ascorbic acid. The role of electrostatic charge in the selective electrocatalytic activity of GS-Au25 was verified by voltammetry of redox markers carrying opposite charges. The pH dependent sensitivity for the determination of DA further confirmed the charge screening effect of GS-Au25. Mechanistic investigation revealed that the selectivity is attained by the selective formation of an electrostatic complex between the negatively charged GS-Au25 and DA cation. The GS-Au25 modified sol-gel electrode also showed excellent selectivity for DA in the presence of an interferent, ascorbic acid.We report here the selective determination of dopamine (DA) using quantum-sized gold nanoparticles coated with charge selective ligands. Glutathione protected gold nanoparticles (GS-Au25) were synthesized and immobilized into a sol-gel matrix via thiol linkers. The GS-Au25 modified sol-gel electrode was found to show excellent electrocatalytic activity towards the oxidation of DA but no activity towards the oxidation of ascorbic acid. The role of electrostatic charge in the selective electrocatalytic activity of GS-Au25 was verified by voltammetry of redox markers carrying opposite charges. The pH dependent sensitivity for the determination of DA further confirmed the charge screening effect of GS-Au25. Mechanistic investigation revealed that the selectivity is attained by the selective formation of an electrostatic complex between the negatively charged GS-Au25 and DA cation. The GS-Au25 modified sol-gel electrode also showed excellent selectivity for DA in the

  9. Determination of Eros Physical Parameters for Near Earth Asteroid Rendezvous Orbit Phase Navigation

    Miller, J. K.; Antreasian, P. J.; Georgini, J.; Owen, W. M.; Williams, B. G.; Yeomans, D. K.

    1995-01-01

    Navigation of the orbit phase of the Near Earth steroid Rendezvous (NEAR) mission will re,quire determination of certain physical parameters describing the size, shape, gravity field, attitude and inertial properties of Eros. Prior to launch, little was known about Eros except for its orbit which could be determined with high precision from ground based telescope observations. Radar bounce and light curve data provided a rough estimate of Eros shape and a fairly good estimate of the pole, prime meridian and spin rate. However, the determination of the NEAR spacecraft orbit requires a high precision model of Eros's physical parameters and the ground based data provides only marginal a priori information. Eros is the principal source of perturbations of the spacecraft's trajectory and the principal source of data for determining the orbit. The initial orbit determination strategy is therefore concerned with developing a precise model of Eros. The original plan for Eros orbital operations was to execute a series of rendezvous burns beginning on December 20,1998 and insert into a close Eros orbit in January 1999. As a result of an unplanned termination of the rendezvous burn on December 20, 1998, the NEAR spacecraft continued on its high velocity approach trajectory and passed within 3900 km of Eros on December 23, 1998. The planned rendezvous burn was delayed until January 3, 1999 which resulted in the spacecraft being placed on a trajectory that slowly returns to Eros with a subsequent delay of close Eros orbital operations until February 2001. The flyby of Eros provided a brief glimpse and allowed for a crude estimate of the pole, prime meridian and mass of Eros. More importantly for navigation, orbit determination software was executed in the landmark tracking mode to determine the spacecraft orbit and a preliminary shape and landmark data base has been obtained. The flyby also provided an opportunity to test orbit determination operational procedures that will be

  10. Physical activity levels and determinants of change in young adults: a longitudinal panel study

    Zimmermann Erwin; Wanner Miriam; Zimmermann-Sloutskis Dorith; Martin Brian W

    2010-01-01

    Abstract Background There is growing concern about physical inactivity in adolescents and young adults. Identifying determinants that are associated with low levels of physical activity and with changes in physical activity levels will help to develop specific prevention strategies. The present study describes the prevalence and potential determinants of physical activity behavior and behavior changes of young adults. The study is based on the Swiss Household Panel (SHP), a longitudinal study...

  11. Determinants of the Adoption of Physical Soil Bund Conservation ...

    Abstract: This study emphasizes the adoption of physical soil bund structures including the major factors influencing the adoption process. The study is based on the data collected from 120 households. Two analytical techniques, descriptive statistics and logistic regression function were employed in analyzing the data.

  12. Children's Physical Attractiveness and Sex as Determinants of Adult Punitiveness

    Dion, Karen K.

    1974-01-01

    Two studies investigated the influence of a child's physical attractiveness and sex as potential elicitors of differential adult punitiveness. Assessed were the reactions of 40 women and 44 men. Results reveal differences in men's and women's reactions and suggest differences in their orientation towards children's task behavior. (Author/SDH)

  13. 3-D mapping with ellipsometrically determined physical thickness ...

    Unknown

    values at different points (121 nos.) with 1 mm gap between two points. Those data were utilized in the Auto- lisp programme for 3-D mapping. Radial distribution of the evaluated values was also displayed. Keywords. Sol–gel silica layer; ellipsometric studies; refractive index; physical thickness; 3D-mapping. 1. Introduction.

  14. Determining Students' Attitude towards Physics through Problem-Solving Strategy

    Erdemir, Naki

    2009-01-01

    In this study, the effects of teacher-directed and self-directed problem-solving strategies on students' attitudes toward physics were explored. Problem-solving strategies were used with the experimental group, while the control group was instructed using traditional teaching methods. The study was conducted with 270 students at various high…

  15. Pre-Service Physics Teachers' Ideas on Size, Visibility and Structure of the Atom

    Unlu, Pervin

    2010-01-01

    Understanding the atom gives the opportunity to both understand and conceptually unify the various domains of science, such as physics, chemistry, biology, astronomy and geology. Among these disciplines, physics teachers are expected to be particularly well educated in this topic. It is important that pre-service physics teachers know what sort of…

  16. Physical activity and healthy diet: determinants and implicit relationship.

    Tavares, Aida Isabel

    2014-06-01

    People who decide to lose weight by dieting often do so without participating in any associated physical activity. Although some people who participate in sports are unconcerned about their diet, it is generally believed that people who exercise tend to eat a healthy diet and those who do not exercise eat a less healthy diet. There is no clear relationship between the decisions regarding participation in physical activity and eating a healthy diet when choices are taken freely and not influenced by policy factors promoting healthy behaviour. However, these decisions may reveal some common explanatory factors and an implicit link. As such the aim of this study was to identify the common explanatory factors and investigate the existence of an implicit relationship. Econometric estimate - bivariate probit estimation. Using data from the Portuguese National Health Survey, a bivariate probit was undertaken for decisions regarding participation in physical activity and eating a healthy diet. The correlation between the residuals gives information on the implicit relationship between the healthy choices. Common explanatory factors were found between the decisions to eat healthy snacks and participate in physical activity, such as being married. However, holding voluntary private health insurance, smoking, getting older, living alone and unemployment were found to dissuade people from making healthy choices. Positive correlation was found between the residuals of the probit estimations, indicating that other unmeasurable variables have a similar influence on both decisions, such as peer pressure, cultural values, fashion, advertising and risk aversion. Further research is needed to improve understanding of decision making related to participation in physical activity and eating a healthy diet. This will facilitate the design of policies that will make a greater contribution to healthy lifestyles. Copyright © 2014 The Royal Society for Public Health. Published by Elsevier

  17. A new approach of recognition of ellipsoidal micro- and nanoparticles on AFM images and determination of their sizes

    Akhmadeev, Albert A; Kh Salakhov, Myakzyum

    2016-01-01

    In this work we develop an approach of automatic recognition of ellipsoidal particles on the atomic force microscopy (AFM) image and determination of their size, which is based on image segmentation and the surface approximation by ellipsoids. In addition to the comparative simplicity and rapidity of processing, this method allows us to determine the size of particles, the surface of which is not completely visible on the image. The proposed method showed good results on simulated images including noisy ones. Using this algorithm the size distributions of silica particles on experimental AFM images have been determined. (paper)

  18. Comparison of different methods for determining the size of a focal spot of microfocus X-ray tubes

    Salamon, M.; Hanke, R.; Krueger, P.; Sukowski, F.; Uhlmann, N.; Voland, V.

    2008-01-01

    The EN 12543-5 describes a method for determining the focal spot size of microfocus X-ray tubes up to a minimum spot size of 5 μm. The wide application of X-ray tubes with even smaller focal spot sizes in computed tomography and radioscopy applications requires the evaluation of existing methods for focal spot sizes below 5 μm. In addition, new methods and conditions for determining submicron focal spot sizes have to be developed. For the evaluation and extension of the present methods to smaller focal spot sizes, different procedures in comparison with the existing EN 12543-5 were analyzed and applied, and the results are presented

  19. Body Size at Birth, Physical Development and Cognitive Outcomes in Early Childhood: Evidence from the Longitudinal Survey of Australian Children

    Ulker, Aydogan

    2016-01-01

    Using a rich sample created from the Longitudinal Survey of Australian Children, we investigate the extent to which the relationship between body size at birth and early childhood cognitive skills is mediated by physical development indicators. Consistent with existing evidence from other countries, we find a significant relationship between body…

  20. Body size, physical activity and risk of colorectal cancer with or without the CpG island methylator phenotype (CIMP)

    Hughes, L.A.E.; Simons, C.C.J.M.; Brandt, P.A. van den; Goldbohm, R.A.; Goeij, A.F. de; Bruïne, A.P. de; Engeland, M. van; Weijenberg, M.P.

    2011-01-01

    Background: We investigated how body size and physical activity influence the risk of the CpG island methylator phenotype (CIMP) in colorectal cancer (CRC). Methods: In the Netherlands Cohort Study (n = 120,852), risk factors were self-reported at baseline in 1986. After 7.3 years of follow-up, 603

  1. Determining the thermal and physicals properties of oil processing products

    Viktoria I. Kryvda

    2015-03-01

    Full Text Available In the last decades both technological process’ improvement and primary energy resources saving are the main tasks of oil refineries. Using various oil products does impose an accurate knowledge of their properties. The dispersion analysis applied makes possible to construct a model simulating the primary oil refining products’ and raw materials’ thermal physical properties. As a result of data approximation there were obtained polynomials with coefficients differing from attributable to the studied oil products fractions. The research represents graphic dependences of thermal physical properties on temperature values for diesel oil fraction. The linear character of density and calorific capacity dependencies from temperature is represented with a proportional error in calculations. The relative minimum error is below 2% that confirms the implemented calculations’ adequacy. The resulting model can be used in calculations for further technological process improvements.

  2. Method for Determining the Sensitivity of a Physical Security System.

    Speed, Ann [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gauthier, John H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hoffman, Matthew John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wachtel, Amanda [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kittinger, Robert Scott [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Munoz-Ramos, Karina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-23

    Modern systems, such as physical security systems, are often designed to involve complex interactions of technological and human elements. Evaluation of the performance of these systems often overlooks the human element. A method is proposed here to expand the concept of sensitivity—as denoted by d’—from signal detection theory (Green & Swets 1966; Macmillan & Creelman 2005), which came out of the field of psychophysics, to cover not only human threat detection but also other human functions plus the performance of technical systems in a physical security system, thereby including humans in the overall evaluation of system performance. New in this method is the idea that probabilities of hits (accurate identification of threats) and false alarms (saying “threat” when there is not one), which are used to calculate d’ of the system, can be applied to technologies and, furthermore, to different functions in the system beyond simple yes-no threat detection. At the most succinct level, the method returns a single number that represents the effectiveness of a physical security system; specifically, the balance between the handling of actual threats and the distraction of false alarms. The method can be automated, and the constituent parts revealed, such that given an interaction graph that indicates the functional associations of system elements and the individual probabilities of hits and false alarms for those elements, it will return the d’ of the entire system as well as d’ values for individual parts. The method can also return a measure of the response bias* of the system. One finding of this work is that the d’ for a physical security system can be relatively poor in spite of having excellent d’s for each of its individual functional elements.

  3. Determination of the size of an imaging data storage device at a full PACS hospital

    Cha, S. J.; Kim, Y. H.; Hur, G.

    2000-01-01

    To determine the appropriate size of a short and long-term storage device, bearing in mind the design factors involved and the installation costs. The number of radiologic studies quoted is the number of these undertaken during a one-year period at a university hospital with 650 beds, and reflects the actual number of each type of examination performed at a full PACS hospital. The average daily number of outpatients was 1586, while that of inpatients was 639.5. The numbers of radiologic studies performed were as follows : 378 among 189 outpatients, and 165 among 41 inpatients. The average daily number of examinations was 543, comprising 460 CR, 30 ultrasonograms, 25 CT, 8 MRI, 20 others. The total amount of digital images was 17.4 GB per day, while the amount of short-term data with lossless compression was 6.7 GB per day. During 14 days short-term storage, the amount of image data was 93.7 GB in disk array. The amount of data stored mid term (1 year), with lossy compression, was 369.1 GB. The amount of data stored in the form of long-term cache and educational images was 38.7 GB and 30 GB, respectively, The total size of disk array was 531.5 GB. A device suitable for the long-term storage of images, for at least five years, requires a capacity of 1845.5 GB. At a full PACS hospital with 600 beds, the minimum disk space required for the short-and mid-term storage of image data in disk array is 540 GB. The capacity required for long term storage (at least five years) is 1900 GB. (author)

  4. An improved assay for the determination of Huntington`s disease allele size

    Reeves, C.; Klinger, K.; Miller, G. [Intergrated Genetics, Framingham, MA (United States)

    1994-09-01

    The hallmark of Huntington`s disease (HD) is the expansion of a polymorphic (CAG)n repeat. Several methods have been published describing PCR amplification of this region. Most of these assays require a complex PCR reaction mixture to amplify this GC-rich region. A consistent problem with trinucleotide repeat PCR amplification is the presence of a number of {open_quotes}stutter bands{close_quotes} which may be caused by primer or amplicon slippage during amplification or insufficient polymerase processivity. Most assays for HD arbitrarily select a particular band for diagnostic purposes. Without a clear choice for band selection such an arbitrary selection may result in inconsistent intra- or inter-laboratory findings. We present an improved protocol for the amplification of the HD trinucleotide repeat region. This method simplifies the PCR reaction buffer and results in a set of easily identifiable bands from which to determine allele size. HD alleles were identified by selecting bands of clearly greater signal intensity. Stutter banding was much reduced thus permitting easy identification of the most relevant PCR product. A second set of primers internal to the CCG polymorphism was used in selected samples to confirm allele size. The mechanism of action of N,N,N trimethylglycine in the PCR reaction is not clear. It may be possible that the minimal isostabilizing effect of N,N,N trimethylglycine at 2.5 M is significant enough to affect primer specificity. The use of N,N,N trimethylglycine in the PCR reaction facilitated identification of HD alleles and may be appropriate for use in other assays of this type.

  5. Determining Sample Size with a Given Range of Mean Effects in One-Way Heteroscedastic Analysis of Variance

    Shieh, Gwowen; Jan, Show-Li

    2013-01-01

    The authors examined 2 approaches for determining the required sample size of Welch's test for detecting equality of means when the greatest difference between any 2 group means is given. It is shown that the actual power obtained with the sample size of the suggested approach is consistently at least as great as the nominal power. However, the…

  6. On Using a Pilot Sample Variance for Sample Size Determination in the Detection of Differences between Two Means: Power Consideration

    Shieh, Gwowen

    2013-01-01

    The a priori determination of a proper sample size necessary to achieve some specified power is an important problem encountered frequently in practical studies. To establish the needed sample size for a two-sample "t" test, researchers may conduct the power analysis by specifying scientifically important values as the underlying population means…

  7. Genome size variation in the pine fusiform rust pathogen Cronartium quercuum f.sp. fusiforme as determined by flow cytometry

    Claire L Anderson; Thomas L Kubisiak; C Dana Nelson; Jason A Smith; John M Davis

    2010-01-01

    The genome size of the pine fusiform rust pathogen Cronartium quercuum f.sp. fusiforme (Cqf) was determined by flow cytometric analysis of propidium iodide-stained, intact haploid pycniospores with haploid spores of two genetically well characterized fungal species, Sclerotinia sclerotiorum and Puccinia graminis f.sp. tritici, as size standards. The Cqf haploid genome...

  8. Interaction Between Physical Environment, Social Environment, and Child Characteristics in Determining Physical Activity at Child Care

    Gubbels, J.S.; Kremers, S.P.J.; Kann, D.H.H. van; Stafleu, A.; Candel, M.J.J.M.; Dagnelie, P.C.; Thijs, C.; Vries, N.K.de

    2011-01-01

    Objective: To investigate the association between the child-care environment and physical activity of 2- and 3-year-olds. Based on an ecological view of environmental influences on health behavior, we hypothesized that the social and physical environment, as well as child characteristics (age and

  9. Habitat structure and body size distributions: Cross-ecosystem comparison for taxa with determinate and indeterminate growth

    Nash, Kirsty L.; Allen, Craig R.; Barichievy, Chris; Nystrom, Magnus; Sundstrom, Shana M.; Graham, Nicholas A.J.

    2014-01-01

    Habitat structure across multiple spatial and temporal scales has been proposed as a key driver of body size distributions for associated communities. Thus, understanding the relationship between habitat and body size is fundamental to developing predictions regarding the influence of habitat change on animal communities. Much of the work assessing the relationship between habitat structure and body size distributions has focused on terrestrial taxa with determinate growth, and has primarily analysed discontinuities (gaps) in the distribution of species mean sizes (species size relationships or SSRs). The suitability of this approach for taxa with indeterminate growth has yet to be determined. We provide a cross-ecosystem comparison of bird (determinate growth) and fish (indeterminate growth) body mass distributions using four independent data sets. We evaluate three size distribution indices: SSRs, species size–density relationships (SSDRs) and individual size–density relationships (ISDRs), and two types of analysis: looking for either discontinuities or abundance patterns and multi-modality in the distributions. To assess the respective suitability of these three indices and two analytical approaches for understanding habitat–size relationships in different ecosystems, we compare their ability to differentiate bird or fish communities found within contrasting habitat conditions. All three indices of body size distribution are useful for examining the relationship between cross-scale patterns of habitat structure and size for species with determinate growth, such as birds. In contrast, for species with indeterminate growth such as fish, the relationship between habitat structure and body size may be masked when using mean summary metrics, and thus individual-level data (ISDRs) are more useful. Furthermore, ISDRs, which have traditionally been used to study aquatic systems, present a potentially useful common currency for comparing body size distributions

  10. Critical analysis of consecutive unilateral cleft lip repairs: determining ideal sample size.

    Power, Stephanie M; Matic, Damir B

    2013-03-01

    Objective : Cleft surgeons often show 10 consecutive lip repairs to reduce presentation bias, however the validity remains unknown. The purpose of this study is to determine the number of consecutive cases that represent average outcomes. Secondary objectives are to determine if outcomes correlate with cleft severity and to calculate interrater reliability. Design : Consecutive preoperative and 2-year postoperative photographs of the unilateral cleft lip-nose complex were randomized and evaluated by cleft surgeons. Parametric analysis was performed according to chronologic, consecutive order. The mean standard deviation over all raters enabled calculation of expected 95% confidence intervals around a mean tested for various sample sizes. Setting : Meeting of the American Cleft Palate-Craniofacial Association in 2009. Patients, Participants : Ten senior cleft surgeons evaluated 39 consecutive lip repairs. Main Outcome Measures : Preoperative severity and postoperative outcomes were evaluated using descriptive and quantitative scales. Results : Intraclass correlation coefficients for cleft severity and postoperative evaluations were 0.65 and 0.21, respectively. Outcomes did not correlate with cleft severity (P  =  .28). Calculations for 10 consecutive cases demonstrated wide 95% confidence intervals, spanning two points on both postoperative grading scales. Ninety-five percent confidence intervals narrowed within one qualitative grade (±0.30) and one point (±0.50) on the 10-point scale for 27 consecutive cases. Conclusions : Larger numbers of consecutive cases (n > 27) are increasingly representative of average results, but less practical in presentation format. Ten consecutive cases lack statistical support. Cleft surgeons showed low interrater reliability for postoperative assessments, which may reflect personal bias when evaluating another surgeon's results.

  11. Quantifying daily physical activity and determinants in sedentary patients with Parkinson's disease

    Dontje, M. L.; de Greef, M. H. G.; Speelman, A. D.; van Nimwegen, M.; Krijnen, W. P.; Stolk, R. P.; Kamsma, Y. P. T.; Munneke, M.; van der Schans, C. P.; Bloem, Bastiaan R.

    2013-01-01

    Background: Although physical activity is beneficial for Parkinson's disease (PD) patients, many do not meet the recommended levels. The range of physical activity among sedentary PD patients is unknown, as are factors that determine this variability. Hence, we aimed to (1) assess daily physical

  12. Determinants of the Capital Structure of Small and Medium Sized Brazilian Enterprises

    Wilson Toshiro Nakamura

    2013-07-01

    Full Text Available This research investigates the determinants of the capital structure of small and medium enterprises (SMEs using a unique database that includes over 19,000 Brazilian firms and spans 13 years of data. The econometric analysis employs the System Generalized Method of Moments estimator (GMM-Sys and two strong results emerge: (a profitability is negatively related to leverage, and (b asset growth is positively related to leverage. Both results are consistent with the pecking order theory of capital structure and suggest that SMEs tend to finance their expansion with debt only after exhausting their internal resources. Additionally, we find weaker evidence for the following: (a size is positively related to leverage, which can be interpreted as evidence that larger firms have more access to credit markets; (b riskier SMEs tend to be less financially leveraged, consistent with the bankruptcy cost arguments from trade-off theories; and (c the age of the firm is negatively related to financial leverage, suggesting that older SMEs may be slightly more conservative in their financing choices. Finally, the magnitude of the coefficient of lagged leverage shows the high persistence of this variable and is compatible with the hypothesis that SMEs adjust their debt/equity ratio towards a target value, although at a low speed.

  13. Nucleus-size pinning for determination of nucleation free-energy barriers and nucleus geometry

    Sharma, Abhishek K.; Escobedo, Fernando A.

    2018-05-01

    Classical Nucleation Theory (CNT) has recently been used in conjunction with a seeding approach to simulate nucleation phenomena at small-to-moderate supersaturation conditions when large free-energy barriers ensue. In this study, the conventional seeding approach [J. R. Espinosa et al., J. Chem. Phys. 144, 034501 (2016)] is improved by a novel, more robust method to estimate nucleation barriers. Inspired by the interfacial pinning approach [U. R. Pedersen, J. Chem. Phys. 139, 104102 (2013)] used before to determine conditions where two phases coexist, the seed of the incipient phase is pinned to a preselected size to iteratively drive the system toward the conditions where the seed becomes a critical nucleus. The proposed technique is first validated by estimating the critical nucleation conditions for the disorder-to-order transition in hard spheres and then applied to simulate and characterize the highly non-trivial (prolate) morphology of the critical crystal nucleus in hard gyrobifastigia. A generalization of CNT is used to account for nucleus asphericity and predict nucleation free-energy barriers for gyrobifastigia. These predictions of nuclei shape and barriers are validated by independent umbrella sampling calculations.

  14. Determining the composition of gold nanoparticles: a compilation of shapes, sizes, and calculations using geometric considerations

    Mori, Taizo; Hegmann, Torsten

    2016-01-01

    Size, shape, overall composition, and surface functionality largely determine the properties and applications of metal nanoparticles. Aside from well-defined metal clusters, their composition is often estimated assuming a quasi-spherical shape of the nanoparticle core. With decreasing diameter of the assumed circumscribed sphere, particularly in the range of only a few nanometers, the estimated nanoparticle composition increasingly deviates from the real composition, leading to significant discrepancies between anticipated and experimentally observed composition, properties, and characteristics. We here assembled a compendium of tables, models, and equations for thiol-protected gold nanoparticles that will allow experimental scientists to more accurately estimate the composition of their gold nanoparticles using TEM image analysis data. The estimates obtained from following the routines described here will then serve as a guide for further analytical characterization of as-synthesized gold nanoparticles by other bulk (thermal, structural, chemical, and compositional) and surface characterization techniques. While the tables, models, and equations are dedicated to gold nanoparticles, the composition of other metal nanoparticle cores with face-centered cubic lattices can easily be estimated simply by substituting the value for the radius of the metal atom of interest.Graphical abstract

  15. Determining the composition of gold nanoparticles: a compilation of shapes, sizes, and calculations using geometric considerations

    Mori, Taizo, E-mail: MORI.Taizo@nims.go.jp; Hegmann, Torsten, E-mail: thegmann@kent.edu [Kent State University, Chemical Physics Interdisciplinary Program, Liquid Crystal Institute (United States)

    2016-10-15

    Size, shape, overall composition, and surface functionality largely determine the properties and applications of metal nanoparticles. Aside from well-defined metal clusters, their composition is often estimated assuming a quasi-spherical shape of the nanoparticle core. With decreasing diameter of the assumed circumscribed sphere, particularly in the range of only a few nanometers, the estimated nanoparticle composition increasingly deviates from the real composition, leading to significant discrepancies between anticipated and experimentally observed composition, properties, and characteristics. We here assembled a compendium of tables, models, and equations for thiol-protected gold nanoparticles that will allow experimental scientists to more accurately estimate the composition of their gold nanoparticles using TEM image analysis data. The estimates obtained from following the routines described here will then serve as a guide for further analytical characterization of as-synthesized gold nanoparticles by other bulk (thermal, structural, chemical, and compositional) and surface characterization techniques. While the tables, models, and equations are dedicated to gold nanoparticles, the composition of other metal nanoparticle cores with face-centered cubic lattices can easily be estimated simply by substituting the value for the radius of the metal atom of interest.Graphical abstract.

  16. Novel probe for determining the size and position of a relativistic electron beam

    Orzechowski, T.J.; Koehler, H.; Edwards, W.; Nelson, M.; Marshall, B.

    1984-01-01

    In order to determine the size and position of a relativistic electron beam inside the wiggler magnetic field of a Free Electron Laser (FEL), we have developed a new probe which intercepts the electron beam on a high Z target and monitors the resulting bremsstrahlung radiation. The probe is designed to move along the entire three meters of the wiggler. This FEL is designed to operate in the microwave region (2 to 8 mm) and the interaction region is an oversized waveguide with a cross section 3 cm x 9.8 cm. The axial probe moves inside this waveguide. The probe stops the electron beam on a Tantalum target and the resulting x-rays are scattered in the forward direction. A scintillator behind the beam stop reacts to the x-rays and emits visible light in the region where the x-rays strike. An array of fiber optics behind the scintillator transmits the visible light to a Reticon camera system which images the visible pattern from the scintillator. Processing the optical image is done by digitizing and storing the image and/or recording the image on video tape. Resolution and performance of this probe will be discussed

  17. Computer program determines chemical composition of physical system at equilibrium

    Kwong, S. S.

    1966-01-01

    FORTRAN 4 digital computer program calculates equilibrium composition of complex, multiphase chemical systems. This is a free energy minimization method with solution of the problem reduced to mathematical operations, without concern for the chemistry involved. Also certain thermodynamic properties are determined as byproducts of the main calculations.

  18. DETERMINATION OF PHYSICAL ACTIVITY DURING SCHOOL RECESS COMBINING MEASUREMENTS OF PHYSICAL ACTIVITY AND CHILDREN’S PERSPECTIVE

    Carlos Álvarez Bogantes

    2018-01-01

    Full Text Available The aim of this study was to determine physical activity levels of children during school recess, taking into account children’s perceptions as well as observations during recess. A mixed method was used, including the System for Observing Play and Leisure Activity in Youth (SOPLAY and focus groups. Participants included students from 3 public schools with regular and alternating schedules, who were observed during their school breaks. In addition, focus groups were held and descriptive statistics were used.  A factorial variance test (2x2 was also used to determine if there were differences between levels of moderate-vigorous physical activity among school types. Results of focus groups were organized into categories. Students exhibited 47.98 sedentary activity and 52.02 moderate-vigorous physical activity during school recess, with girls being more sedentary than boys. Students with an alternating schedule are more active than those with a regular schedule. Participants perceived reduced space to play and little support from teachers as barriers to do physical activity. In conclusion, this study showed that a little over 50% of students perform physical activity during school recess, with children in alternating schedules being more active than those with a regular schedule. Participants perceive that school environment does not favor physical activity, due to environmental barriers. Based on the results of this study, physical activity should be promoted during school recess, taking into consideration barriers in natural, social, physical, and organizational environments.

  19. Perceived Teaching Behaviors and Self-Determined Motivation in Physical Education: A Test of Self-Determination Theory

    Koka, Andre; Hagger, Martin S.

    2010-01-01

    In the present study, we tested the effects of specific dimensions of perceived teaching behaviors on students' self-determined motivation in physical education. In accordance with the tenets of self-determination theory (Deci & Ryan, 1985, 2000), we expected the psychological needs for competence, autonomy, and relatedness would mediate these…

  20. Determinants of leisure-time physical activity and future intention to practice in Spanish college students.

    Molina-García, Javier; Castillo, Isabel; Pablos, Carlos

    2009-05-01

    Few studies analyze determinants and patterns of physical activity among college students, so it has not been possible to carry out effective interventions to promote this practice. The aim of this study was to analyze the associations between some personal, social, and environmental determinants, practice of physical activity and future intention to practice in a sample of 639 university students (321 men and 318 women), mean age 21.43 years (+/- 2.78). Physical fitness self-perception, physical activity history, and coach's support to practice physical activity have a direct effect on the practice of physical activity and an indirect effect on future intention to practice, both in men and women. The practice of physical activity has also a direct effect on future intention to practice. Likewise, the participation in sport competitions predicts practice of physical activity and future intention in men, whereas being a member of a sports club predicts practice and future intention in women.

  1. Bimodal distribution of the magnetic dipole moment in nanoparticles with a monomodal distribution of the physical size

    Rijssel, Jos van; Kuipers, Bonny W.M.; Erné, Ben H.

    2015-01-01

    High-frequency applications of magnetic nanoparticles, such as therapeutic hyperthermia and magnetic particle imaging, are sensitive to nanoparticle size and dipole moment. Usually, it is assumed that magnetic nanoparticles with a log-normal distribution of the physical size also have a log-normal distribution of the magnetic dipole moment. Here, we test this assumption for different types of superparamagnetic iron oxide nanoparticles in the 5–20 nm range, by multimodal fitting of magnetization curves using the MINORIM inversion method. The particles are studied while in dilute colloidal dispersion in a liquid, thereby preventing hysteresis and diminishing the effects of magnetic anisotropy on the interpretation of the magnetization curves. For two different types of well crystallized particles, the magnetic distribution is indeed log-normal, as expected from the physical size distribution. However, two other types of particles, with twinning defects or inhomogeneous oxide phases, are found to have a bimodal magnetic distribution. Our qualitative explanation is that relatively low fields are sufficient to begin aligning the particles in the liquid on the basis of their net dipole moment, whereas higher fields are required to align the smaller domains or less magnetic phases inside the particles. - Highlights: • Multimodal fits of dilute ferrofluids reveal when the particles are multidomain. • No a priori shape of the distribution is assumed by the MINORIM inversion method. • Well crystallized particles have log-normal TEM and magnetic size distributions. • Defective particles can combine a monomodal size and a bimodal dipole moment

  2. A Single IGF1 Allele Is a Major Determinant of Small Size in Dogs

    Sutter, Nathan B.; Bustamante, Carlos D.; Chase, Kevin; Gray, Melissa M.; Zhao, Keyan; Zhu, Lan; Padhukasahasram, Badri; Karlins, Eric; Davis, Sean; Jones, Paul G.; Quignon, Pascale; Johnson, Gary S.; Parker, Heidi G.; Fretwell, Neale; Mosher, Dana S.

    2007-01-01

    The domestic dog exhibits greater diversity in body size than any other terrestrial vertebrate. We used a strategy that exploits the breed structure of dogs to investigate the genetic basis of size. First, through a genome-wide scan, we identified a major quantitative trait locus (QTL) on chromosome 15 influencing size variation within a single breed. Second, we examined genetic variation in the 15-megabase interval surrounding the QTL in small and giant breeds and found marked evidence for a...

  3. Determination of physical properties of fibrous thermal insulation

    Jeandel G.

    2012-10-01

    Full Text Available The objective of this study is to characterize both experimentally and theoretically, conductive and radiative heat transfer within polyester batting. This material is derived from recycled bottles (PET with fibres of constant diameters. Two other mineral and plant fibrous insulation materials, (glass wool and hemp wool are also characterized for comparative purposes. To determine the overall thermophysical properties of the tested materials, heat flux measurement are carried out using a device developed in house. The radiative properties of the material are determined by an inverse method based on measurements of transmittance and reflectance using a FTIR spectrometer and by solving the equation of radiative heat transfer. These measures are compared to results of numerical simulations.

  4. Predicting Satisfaction in Physical Education from Motivational Climate and Self-Determined Motivation

    Baena-Extremera, Antonio; Gómez-López, Manuel; Granero-Gallegos, Antonio; Ortiz-Camacho, Maria del Mar

    2015-01-01

    The purpose of this research study was to determine to what extent the motivational climate perceived by students in Physical Education (PE) classes predicts self-determined motivation, and satisfaction with physical education classes. Questionnaires were administered to 758 high school students aged 13-18 years. We used the Spanish versions of…

  5. Determinants of diet and physical activity (DEDIPAC): a summary of findings

    Brug, J.; van der Ploeg, H.P.; Loyen, A.; Ahrens, W.; Allais, O.; Andersen, L.F.; Cardon, G.; Capranica, L.; Chastin, S.; De Bourdeaudhuij, I.; De Craemer, M.; Donnelly, A.; Ekelund, U.; Finglas, P.; Flechtner-Mors, M.; Hebestreit, A.; Kubiak, T.; Lanza, M.; Lien, N.; MacDonncha, C.; Mazzocchi, M.; Monsivais, P.; Murphy, M.; Nicolaou, M.; Nöthlings, U.; O’Gorman, D.J.; Renner, B.; Roos, G.; van den Berg, M.; Schulze, M.B.; Steinacker, J.M.; Stronks, K.; Volkert, D.; Lakerveld, J.

    2017-01-01

    The establishment of the Determinants of Diet and Physical Activity (DEDIPAC) Knowledge Hub, 2013–2016, was the first action taken by the ‘Healthy Diet for a Healthy Life’ European Joint Programming Initiative. DEDIPAC aimed to provide better insight into the determinants of diet, physical activity

  6. Determinants of diet and physical activity (DEDIPAC): a summary of findings

    Brug, Johannes; van der Ploeg, Hidde P.; Loyen, Anne; Ahrens, Wolfgang; Allais, Oliver; Andersen, Lene F.; Cardon, Greet; Capranica, Laura; Chastin, Sebastien; de Bourdeaudhuij, Ilse; de Craemer, Marieke; Donnelly, Alan; Ekelund, Ulf; Finglas, Paul; Flechtner-Mors, Marion; Hebestreit, Antje; Kubiak, Thomas; Lanza, Massimo; Lien, Nanna; MacDonncha, Ciaran; Mazzocchi, Mario; Monsivais, Pablo; Murphy, Marie; Nicolaou, Mary; Nöthlings, Ute; O'Gorman, Donal J.; Renner, Britta; Roos, Gun; van den Berg, Matthijs; Schulze, Matthias B.; Steinacker, Jürgen M.; Stronks, Karien; Volkert, Dorothee; Lakerveld, Jeroen

    2017-01-01

    The establishment of the Determinants of Diet and Physical Activity (DEDIPAC) Knowledge Hub, 2013-2016, was the first action taken by the 'Healthy Diet for a Healthy Life' European Joint Programming Initiative. DEDIPAC aimed to provide better insight into the determinants of diet, physical activity

  7. Determinants of diet and physical activity (DEDIPAC): a summary of findings.

    Brug, Johannes; van der Ploeg, Hidde P; Loyen, Anne; Ahrens, Wolfgang; Allais, Oliver; Andersen, Lene F; Cardon, Greet; Capranica, Laura; Chastin, Sebastien; De Bourdeaudhuij, Ilse; De Craemer, Marieke; Donnelly, Alan; Ekelund, Ulf; Finglas, Paul; Flechtner-Mors, Marion; Hebestreit, Antje; Kubiak, Thomas; Lanza, Massimo; Lien, Nanna; MacDonncha, Ciaran; Mazzocchi, Mario; Monsivais, Pablo; Murphy, Marie; Nicolaou, Mary; Nöthlings, Ute; O'Gorman, Donal J; Renner, Britta; Roos, Gun; van den Berg, Matthijs; Schulze, Matthias B; Steinacker, Jürgen M; Stronks, Karien; Volkert, Dorothee; Lakerveld, Jeroen

    2017-01-01

    The establishment of the Determinants of Diet and Physical Activity (DEDIPAC) Knowledge Hub, 2013-2016, was the first action taken by the 'Healthy Diet for a Healthy Life' European Joint Programming Initiative. DEDIPAC aimed to provide better insight into the determinants of diet, physical activity

  8. Reproduction mode of European Bitterling (Rhodeus amarus, Bloch, 1782) determined through rapid oocyte counts and size determination using digital imaging

    Konečná, Markéta

    2012-01-01

    Roč. 28, č. 5 (2012), s. 806-810 ISSN 0175-8659 R&D Projects: GA MŠk LC522; GA AV ČR KJB600930802 Institutional support: RVO:68081766 Keywords : bitterling * oocyte * size determibation Subject RIV: EG - Zoology Impact factor: 0.902, year: 2012

  9. Physical determinants of radiation sensitivity in bacterial spores

    Powers, E.L.

    1982-01-01

    Several factors modifying radiation sensitivity in dry bacterial spores are described and discussed. Vacuum inducing the loss of critical structural water, very low dose rates of radiation from which the cell may recover, radiations of high linear energy transfer, and the action of temperature over long periods of time on previously irradiated cells are recognized from extensive laboratory work as important in determining survival of spores exposed to low radiation doses at low temperatures for long periods of time. Some extensions of laboratory work are proposed

  10. Neutron physics calculation for WWER-1000 absorber element lifetime determination

    Kurakin, K.Yu.; Kushmanov, S.A.

    2009-01-01

    Absorber element with compound absorber has been operating in WWER-1000 power units since 1995. AE design meets operating organizations requirements for reliability, service life (to 10 years) and safety functions. Extension of AE service life up to 20 - 30 years by the complex of calculation and experimental work is an important problem of WWER new designs development. The paper deals with the issues related to calculation determination of main factors that influence AE service life limitation - neutron flux and fluence onto absorbing and structural materials during extended service life. (Authors)

  11. Technical Note: On methodologies for determining the size-normalised weight of planktic foraminifera

    C. J. Beer

    2010-07-01

    Full Text Available The size-normalised weight (SNW of planktic foraminifera, a measure of test wall thickness and density, is potentially a valuable palaeo-proxy for marine carbon chemistry. As increasing attention is given to developing this proxy it is important that methods are comparable between studies. Here, we compare SNW data generated using two different methods to account for variability in test size, namely (i the narrow (50 μm range sieve fraction method and (ii the individually measured test size method. Using specimens from the 200–250 μm sieve fraction range collected in multinet samples from the North Atlantic, we find that sieving does not constrain size sufficiently well to isolate changes in weight driven by variations in test wall thickness and density from those driven by size. We estimate that the SNW data produced as part of this study are associated with an uncertainty, or error bar, of about ±11%. Errors associated with the narrow sieve fraction method may be reduced by decreasing the size of the sieve window, by using larger tests and by increasing the number tests employed. In situations where numerous large tests are unavailable, however, substantial errors associated with this sieve method remain unavoidable. In such circumstances the individually measured test size method provides a better means for estimating SNW because, as our results show, this method isolates changes in weight driven by variations in test wall thickness and density from those driven by size.

  12. Habitat area and climate stability determine geographical variation in plant species range sizes

    Morueta-Holme, Naia; Enquist, Brian J.; McGill, Brian J.

    2013-01-01

    Despite being a fundamental aspect of biodiversity, little is known about what controls species range sizes. This is especially the case for hyperdiverse organisms such as plants. We use the largest botanical data set assembled to date to quantify geographical variation in range size for ~85,000 ...

  13. Bat distribution size or shape as determinant of viral richness in african bats.

    Gaël D Maganga

    Full Text Available The rising incidence of emerging infectious diseases (EID is mostly linked to biodiversity loss, changes in habitat use and increasing habitat fragmentation. Bats are linked to a growing number of EID but few studies have explored the factors of viral richness in bats. These may have implications for role of bats as potential reservoirs. We investigated the determinants of viral richness in 15 species of African bats (8 Pteropodidae and 7 microchiroptera in Central and West Africa for which we provide new information on virus infection and bat phylogeny. We performed the first comparative analysis testing the correlation of the fragmented geographical distribution (defined as the perimeter to area ratio with viral richness in bats. Because of their potential effect, sampling effort, host body weight, ecological and behavioural traits such as roosting behaviour, migration and geographical range, were included into the analysis as variables. The results showed that the geographical distribution size, shape and host body weight have significant effects on viral richness in bats. Viral richness was higher in large-bodied bats which had larger and more fragmented distribution areas. Accumulation of viruses may be related to the historical expansion and contraction of bat species distribution range, with potentially strong effects of distribution edges on virus transmission. Two potential explanations may explain these results. A positive distribution edge effect on the abundance or distribution of some bat species could have facilitated host switches. Alternatively, parasitism could play a direct role in shaping the distribution range of hosts through host local extinction by virulent parasites. This study highlights the importance of considering the fragmentation of bat species geographical distribution in order to understand their role in the circulation of viruses in Africa.

  14. Habitat disturbance and hydrological parameters determine the body size and reproductive strategy of alluvial ground beetles.

    Gerisch, Michael

    2011-01-01

    Environmental variability is the main driver for the variation of biological characteristics (life-history traits) of species. Therefore, life-history traits are particularly suited to identify mechanistic linkages between environmental variability and species occurrence and can help in explaining ecological patterns. For ground beetles, few studies directly related species traits to environmental variables. This study aims to analyse how life-history traits of alluvial ground beetles are controlled by environmental factors. I expected that the occurrence of species and the occurrence of specific traits are closely related to hydrological and disturbance parameters. Furthermore I expected most of the trait-variation to be explained by a combination of environmental variables, rather than by their isolated effects. Ground beetles were sampled in the year 2005 in floodplain grassland along the Elbe River in Germany. I used redundancy analysis to quantify the effects of hydrological, sediment, and disturbance related parameters on both species occurrence and species traits. I applied variation partitioning to analyse which environmental compartments explain most of the trait variation. Species occurrence and trait variation were both mainly controlled by hydrological and flood disturbance parameters. I could clearly identify reproductive traits and body size as key traits for floodplain ground beetles to cope with the environmental variability. Furthermore, combinations of hydrological, habitat disturbance, habitat type, and species diversity parameters, rather than their isolated effects, explained large parts of ground beetle trait variation. Thus, a main conclusion of this study is that ground beetle occurrence is mainly determined by complex, multi-scale interactions between environmental variability and their life-history traits.

  15. Physical properties and microstructure of Ti(CN)-based cermets with different WC particle size

    Deng, Ying; Deng, Ling; Xiong, Xiang; Ye, J.W.; Li, P.P.

    2014-01-01

    Ti(CN)-based cermets with different WC particle sizes from 0.2 to 4 μm were prepared at 1450 °C with 2 MPa Air pressure. The microstructure of cermets was investigated by scanning electron microscope (SEM), X-ray diffraction (XRD), Transmission electron microscope (TEM). The results showed that all the cermets with different WC particle sizes have a typical “core–rim” structure. With the increase of WC powder sizes, the frequency and portion of Ti(C 0.7 N 0.3 ) cores and rim are somewhat decreased while the portion of white core is increased, due to the relative dissolution rate decreasing. In addition, the fracture mode of Ti(C,N) based cermets is a mixture of trans-granular (primary) and inter-granular (subordinate) fracture. The TRS (about 1850 MPa) of the cermets fluctuate slightly with the WC particle sizes from 0.2 to 1.0 μm, but decrease evidently with WC particle sizes up to 2 μm

  16. Effect of Crushed Glass Cullet Sizes on Physical and Mechanical Properties of Red Clay Bricks

    Patricia Ponce Peña

    2016-01-01

    Full Text Available This study reports the effect of clear waste glass from bottles added on 20 to 30 wt.% and variable particle size (<500, <300, and <212 μm, into clay mixtures for the handmade brick manufacturing process. The bricks were manufactured with mixtures of clay, crushed glass, and water in different proportions, homogenized, casted in wooden molds, air-dried at room temperature for 72 h, and sintered at 1000°C for 12 h. Total shrinkage, water absorption, compressive strength, microstructure, and phase composition are discussed with respect to glass content and its particle size. The results indicate that increasing the content of glass and decreasing its particle size enhanced significantly the brick properties of water absorption and compressive strength by up to 18.5% and 6.8 MPa, for bricks with 30 wt% and particle size lower than 212 μm. It is proposed that decreasing the glass particle size its surface area increases allowing easier melting of glass by lower energy consumption, reducing porosity and enhancing brick properties.

  17. Physical and biological factors determining the effective proton range

    Grün, Rebecca; Friedrich, Thomas; Krämer, Michael; Scholz, Michael; Zink, Klemens; Durante, Marco; Engenhart-Cabillic, Rita

    2013-01-01

    Purpose: Proton radiotherapy is rapidly becoming a standard treatment option for cancer. However, even though experimental data show an increase of the relative biological effectiveness (RBE) with depth, particularly at the distal end of the treatment field, a generic RBE of 1.1 is currently used in proton radiotherapy. This discrepancy might affect the effective penetration depth of the proton beam and thus the dose to the surrounding tissue and organs at risk. The purpose of this study was thus to analyze the impact of a tissue and dose dependent RBE of protons on the effective range of the proton beam in comparison to the range based on a generic RBE of 1.1.Methods: Factors influencing the biologically effective proton range were systematically analyzed by means of treatment planning studies using the Local Effect Model (LEM IV) and the treatment planning software TRiP98. Special emphasis was put on the comparison of passive and active range modulation techniques.Results: Beam energy, tissue type, and dose level significantly affected the biological extension of the treatment field at the distal edge. Up to 4 mm increased penetration depth as compared to the depth based on a constant RBE of 1.1. The extension of the biologically effective range strongly depends on the initial proton energy used for the most distal layer of the field and correlates with the width of the distal penumbra. Thus, the range extension, in general, was more pronounced for passive as compared to active range modulation systems, whereas the maximum RBE was higher for active systems.Conclusions: The analysis showed that the physical characteristics of the proton beam in terms of the width of the distal penumbra have a great impact on the RBE gradient and thus also the biologically effective penetration depth of the beam

  18. Local climate determines intra- and interspecific variation in sexual size dimorphism in mountain grasshopper communities.

    Laiolo, P; Illera, J C; Obeso, J R

    2013-10-01

    The climate is often evoked to explain broad-scale clines of body size, yet its involvement in the processes that generate size inequality in the two sexes (sexual size dimorphism) remains elusive. Here, we analyse climatic clines of sexual size dimorphism along a wide elevation gradient (i) among grasshopper species in a phylogenetically controlled scenario and (ii) within species differing in distribution and cold tolerance, to highlight patterns generated at different time scales, mainly evolutionary (among species or higher taxa) and ontogenetic or microevolutionary (within species). At the interspecific level, grasshoppers were slightly smaller and less dimorphic at high elevations. These clines were associated with gradients of precipitation and sun exposure, which are likely indicators of other factors that directly exert selective pressures, such as resource availability and conditions for effective thermoregulation. Within species, we found a positive effect of temperature and a negative effect of elevation on body size, especially on condition-dependent measures of body size (total body length rather than hind femur length) and in species inhabiting the highest elevations. In spite of a certain degree of species-specific variation, females tended to adjust their body size more often than males, suggesting that body size in females can evolve faster among species and can be more plastic or dependent on nutritional conditions within species living in adverse climates. Natural selection on female body size may therefore prevail over sexual selection on male body size in alpine environments, and abiotic factors may trigger consistent phenotypic patterns across taxonomic scales. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

  19. Bringing VY Canis Majoris Down to Size: An Improved Determination of Its Effective Temperature

    Massey, Philip; Levesque, Emily M.; Plez, Bertrand

    2006-08-01

    The star VY CMa is a late-type M supergiant with many peculiarities, mostly related to the intense circumstellar environment due to the star's high mass-loss rate. Claims have been made that would imply that this star is considerably more luminous (L~5×105 Lsolar) and larger (R~2800 Rsolar) than other Galactic red supergiants (RSGs). Indeed, such a location in the H-R diagram would be well within the ``Hayashi forbidden zone,'' where stars cannot be in hydrostatic equilibrium. These extraordinary properties, however, rest on an assumed effective temperature of 2800-3000 K, far cooler than recent work has shown RSGs to be. To obtain a better estimate, we fit newly obtained spectrophotometry in the optical and NIR with the same MARCS models used for our recent determination of the physical properties of other RSGs; we also use V-K and V-J from the literature to derive an effective temperature. We find that the star likely has a temperature of 3650 K, a luminosity L~6×104 Lsolar, and a radius of ~600 Rsolar. These values are consistent with VY CMa being an ordinary, evolved 15 Msolar RSG and agree well with the Geneva evolutionary tracks. We find that the circumstellar dust region has a temperature of 760 K, and an effective radius of ~130 AU, if spherical geometry is assumed for the latter. What causes this star to have such a high mass loss and large variations in brightness (but with little change in color) remains a mystery at present, although we speculate that perhaps this star and NML Cyg are simply normal RSGs caught during an unusually unstable time.

  20. Modification effects of physical activity and protein intake on heritability of body size and composition

    Silventoinen, Karri; Hasselbalch, Ann Louise; Lallukka, Tea

    2009-01-01

    with the Mx statistical package (Virginia Institute for Psychiatric and Behavioral Genetics, Virginia Commonwealth University, Richmond, VA). RESULTS: High physical activity was associated with lower mean values, and a high proportion of protein in the diet was associated with higher mean BMI, waist......BACKGROUND: The development of obesity is still a poorly understood process that is dependent on both genetic and environmental factors. OBJECTIVE: The objective was to examine how physical activity and the proportion of energy as protein in the diet modify the genetic variation of body mass index....... The participants reported the frequency and intensity of their leisure time physical activity. Waist circumference and BMI were measured. Percentage body fat was assessed in Denmark by using a bioelectrical impedance method. The data were analyzed by using gene-environment interaction models for twin data...

  1. Relations among school students' self-determined motivation, perceived enjoyment, effort, and physical activity behaviors.

    Zhang, Tao

    2009-12-01

    Guided by the self-determination theory, the purpose of this study was to examine the predictive strength of self-determined motivation toward motivational outcomes (perceived enjoyment, perceived effort, physical activity behaviors) for 286 middle school students in physical education. Analyses indicated that intrinsic motivation, identified regulation, and introjected regulation were positively related to students' enjoyment, perceived effort, and physical activity, whereas amotivation was negatively associated with students' enjoyment and perceived effort. The findings highlighted the importance of higher self-determined motivation (intrinsic motivation and identified regulation) in students' perceived enjoyment, effort, and physical activity behaviors. This study supports the use of self-determination theory to investigate students' motivational outcomes in school physical education.

  2. Physical constraints determine the logic of bacterial promoter architectures

    Ezer, Daphne; Zabet, Nicolae Radu; Adryan, Boris

    2014-01-01

    Site-specific transcription factors (TFs) bind to their target sites on the DNA, where they regulate the rate at which genes are transcribed. Bacterial TFs undergo facilitated diffusion (a combination of 3D diffusion around and 1D random walk on the DNA) when searching for their target sites. Using computer simulations of this search process, we show that the organization of the binding sites, in conjunction with TF copy number and binding site affinity, plays an important role in determining not only the steady state of promoter occupancy, but also the order at which TFs bind. These effects can be captured by facilitated diffusion-based models, but not by standard thermodynamics. We show that the spacing of binding sites encodes complex logic, which can be derived from combinations of three basic building blocks: switches, barriers and clusters, whose response alone and in higher orders of organization we characterize in detail. Effective promoter organizations are commonly found in the E. coli genome and are highly conserved between strains. This will allow studies of gene regulation at a previously unprecedented level of detail, where our framework can create testable hypothesis of promoter logic. PMID:24476912

  3. Determination of meteoroid physical properties from tristatic radar observations

    J. Kero

    2008-08-01

    Full Text Available In this work we give a review of the meteor head echo observations carried out with the tristatic 930 MHz EISCAT UHF radar system during four 24 h runs between 2002 and 2005 and compare these with earlier observations. A total number of 410 tristatic meteors were observed. We describe a method to determine the position of a compact radar target in the common volume monitored by the three receivers and demonstrate its applicability for meteor studies. The inferred positions of the meteor targets have been utilized to estimate their velocities, decelerations and directions of arrival as well as their radar cross sections with unprecedented accuracy. The velocity distribution of the meteoroids is bimodal with peaks at 35–40 km/s and 55–60 km/s, and ranges from 19–70 km/s. The estimated masses are between 10−9–10−5.5 kg. There are very few detections below 30 km/s. The observations are clearly biased to high-velocity meteoroids, but not so biased against slow meteoroids as has been presumed from previous tristatic measurements. Finally, we discuss how the radial deceleration observed with a monostatic radar depends on the meteoroid velocity and the angle between the trajectory and the beam. The finite beamwidth leads to underestimated meteoroid masses if radial velocity and deceleration of meteoroids approaching the radar are used as estimates of the true quantities in a momentum equation of motion.

  4. AFM topographies of densely packed nanoparticles: a quick way to determine the lateral size distribution by autocorrelation function analysis

    Fekete, L.; Kůsová, K.; Petrák, V.; Kratochvílová, I.

    2012-01-01

    The distribution of sizes is one of the basic characteristics of nanoparticles. Here, we propose a novel way to determine the lateral distribution of sizes from AFM topographies. Our algorithm is based on the autocorrelation function and can be applied both on topographies containing spatially separated and densely packed nanoparticles as well as on topographies of polycrystalline films. As no manual treatment is required, this algorithm can be easily automatable for batch processing. The algorithm works in principle with any kind of spatially mapped information (AFM current maps, optical microscope images, etc.), and as such has no size limitations. However, in the case of AFM topographies, the tip/sample convolution effects will be the factor limiting the smallest size to which the algorithm is applicable. Here, we demonstrate the usefulness of this algorithm on objects with sizes ranging between 20 nm and 1.5 μm.

  5. Wavefront-sensor-induced beam size error: physical mechanism, sensitivity-analysis and correction method

    Koek, W.D.; Zwet, E.J. van

    2015-01-01

    When using a commonly-used quadri-wave lateral shearing interferometer wavefront sensor (QWLSI WFS) for beam size measurements on a high power CO2 laser, artefacts have been observed in the measured irradiance distribution. The grating in the QWLSI WFS not only generates the diffracted first orders

  6. Physical Activity, Body Size, Intentional Weight Loss and Breast Cancer Risk: Fellowship

    2000-10-01

    early life physical activity and weight interactions in postmenopausal women; 2) age specific intentional weight loss; 3) method of weight loss. In...Effects of aerobic exercise and dietary carbohydrate on energy expenditure and body composition during weight reduction in obese women. Am J Clin...3600 1 soccer , and swimming as well as labor, but not high school 1-2 561 696 0.95 (0.83-1.08) s r 3-4 694 957 0.91 (0.81-1.02) physical education. Up

  7. A Single IGF1 Allele Is a Major Determinant of Small Size in Dogs

    Sutter, Nathan B.; Bustamante, Carlos D.; Chase, Kevin; Gray, Melissa M.; Zhao, Keyan; Zhu, Lan; Padhukasahasram, Badri; Karlins, Eric; Davis, Sean; Jones, Paul G.; Quignon, Pascale; Johnson, Gary S.; Parker, Heidi G.; Fretwell, Neale; Mosher, Dana S.; Lawler, Dennis F.; Satyaraj, Ebenezer; Nordborg, Magnus; Lark, K. Gordon; Wayne, Robert K.; Ostrander, Elaine A.

    2009-01-01

    The domestic dog exhibits greater diversity in body size than any other terrestrial vertebrate. We used a strategy that exploits the breed structure of dogs to investigate the genetic basis of size. First, through a genome-wide scan, we identified a major quantitative trait locus (QTL) on chromosome 15 influencing size variation within a single breed. Second, we examined genetic variation in the 15-megabase interval surrounding the QTL in small and giant breeds and found marked evidence for a selective sweep spanning a single gene (IGF1), encoding insulin-like growth factor 1. A single IGF1 single-nucleotide polymorphism haplotype is common to all small breeds and nearly absent from giant breeds, suggesting that the same causal sequence variant is a major contributor to body size in all small dogs. PMID:17412960

  8. Determination of meteoroid physical properties from tristatic radar observations

    J. Kero

    2008-08-01

    Full Text Available In this work we give a review of the meteor head echo observations carried out with the tristatic 930 MHz EISCAT UHF radar system during four 24 h runs between 2002 and 2005 and compare these with earlier observations. A total number of 410 tristatic meteors were observed. We describe a method to determine the position of a compact radar target in the common volume monitored by the three receivers and demonstrate its applicability for meteor studies. The inferred positions of the meteor targets have been utilized to estimate their velocities, decelerations and directions of arrival as well as their radar cross sections with unprecedented accuracy. The velocity distribution of the meteoroids is bimodal with peaks at 35–40 km/s and 55–60 km/s, and ranges from 19–70 km/s. The estimated masses are between 10−9–10−5.5 kg. There are very few detections below 30 km/s. The observations are clearly biased to high-velocity meteoroids, but not so biased against slow meteoroids as has been presumed from previous tristatic measurements. Finally, we discuss how the radial deceleration observed with a monostatic radar depends on the meteoroid velocity and the angle between the trajectory and the beam. The finite beamwidth leads to underestimated meteoroid masses if radial velocity and deceleration of meteoroids approaching the radar are used as estimates of the true quantities in a momentum equation of motion.

  9. Determination of Crystallite Size Distribution Histogram in Nanocrystalline Anatase Powders by XRD

    Matěj, Z.; Matějová, Lenka; Novotný, F.; Drahokoupil, Jan; Kužel, R.

    2011-01-01

    Roč. 1, - (2011), s. 87-92 [European Powder Diffraction Conference EPDIC 12 /12./. Darmstadt, 27.08.2010-30.08.2010] R&D Projects: GA AV ČR KAN400720701 Institutional research plan: CEZ:AV0Z40720504; CEZ:AV0Z10100520 Keywords : titanium dioxide * crystallite size * crystallite size distribution Subject RIV: CA - Inorganic Chemistry http://www.oldenbourg-link.com/ toc /zkpr/current

  10. Factors determining the average body size of geographically separated Arctodiaptomus salinus (Daday, 1885) populations

    Anufriieva, Elena V.; Shadrin, Nickolai V.

    2014-01-01

    Arctodiaptomus salinus inhabits water bodies across Eurasia and North Africa. Based on our own data and that from the literature, we analyzed the influences of several factors on the intra- and inter-population variability of this species. A strong negative linear correlation between temperature and average body size in the Crimean and African populations was found, in which the parameters might be influenced by salinity. Meanwhile, asignificant negative correlation between female body size a...

  11. Determining size-specific emission factors for environmental tobacco smoke particles

    Klepeis, Neil E.; Apte, Michael G.; Gundel, Lara A.; Sextro, Richard G.; Nazaroff, William W.

    2002-07-07

    Because size is a major controlling factor for indoor airborne particle behavior, human particle exposure assessments will benefit from improved knowledge of size-specific particle emissions. We report a method of inferring size-specific mass emission factors for indoor sources that makes use of an indoor aerosol dynamics model, measured particle concentration time series data, and an optimization routine. This approach provides--in addition to estimates of the emissions size distribution and integrated emission factors--estimates of deposition rate, an enhanced understanding of particle dynamics, and information about model performance. We applied the method to size-specific environmental tobacco smoke (ETS) particle concentrations measured every minute with an 8-channel optical particle counter (PMS-LASAIR; 0.1-2+ micrometer diameters) and every 10 or 30 min with a 34-channel differential mobility particle sizer (TSI-DMPS; 0.01-1+ micrometer diameters) after a single cigarette or cigar was machine-smoked inside a low air-exchange-rate 20 m{sup 3} chamber. The aerosol dynamics model provided good fits to observed concentrations when using optimized values of mass emission rate and deposition rate for each particle size range as input. Small discrepancies observed in the first 1-2 hours after smoking are likely due to the effect of particle evaporation, a process neglected by the model. Size-specific ETS particle emission factors were fit with log-normal distributions, yielding an average mass median diameter of 0.2 micrometers and an average geometric standard deviation of 2.3 with no systematic differences between cigars and cigarettes. The equivalent total particle emission rate, obtained integrating each size distribution, was 0.2-0.7 mg/min for cigars and 0.7-0.9 mg/min for cigarettes.

  12. Predation on rose galls: parasitoids and predators determine gall size through directional selection.

    Zoltán László

    Full Text Available Both predators and parasitoids can have significant effects on species' life history traits, such as longevity or clutch size. In the case of gall inducers, sporadically there is evidence to suggest that both vertebrate predation and insect parasitoid attack may shape the optimal gall size. While the effects of parasitoids have been studied in detail, the influence of vertebrate predation is less well-investigated. To better understand this aspect of gall size evolution, we studied vertebrate predation on galls of Diplolepis rosae on rose (Rosa canina shrubs. We measured predation frequency, predation incidence, and predation rate in a large-scale observational field study, as well as an experimental field study. Our combined results suggest that, similarly to parasitoids, vertebrate predation makes a considerable contribution to mortality of gall inducer larvae. On the other hand, its influence on gall size is in direct contrast to the effect of parasitoids, as frequency of vertebrate predation increases with gall size. This suggests that the balance between predation and parasitoid attack shapes the optimal size of D. rosae galls.

  13. Gender-Specific Associations between Personality Traits, Physical Activity, and Body Size Dissatisfaction

    Lodewyk, Ken; Sullivan, Philip

    2017-01-01

    A recently validated trait personality framework is the HEXACO (honesty-humility, emotionality, extraversion, agreeableness, conscientiousness, and openness to experience). Little is yet known about how the HEXACO personality dimensions and its subsets--particularly the dimension of honesty-humility--relates to physical activity and body size…

  14. "allometry" Deterministic Approaches in Cell Size, Cell Number and Crude Fiber Content Related to the Physical Quality of Kangkong (Ipomoea reptans) Grown Under Different Plant Density Pressures

    Selamat, A.; Atiman, S. A.; Puteh, A.; Abdullah, N. A. P.; Mohamed, M. T. M.; Zulkeefli, A. A.; Othman, S.

    Kangkong, especially the upland type (Ipomoea reptans) is popularly consumed as a vegetable dish in the South East Asian countries for its quality related to Vitamins (A and C) and crude fiber contents. Higher fiber contents would prevent from the occurrence of colon cancer and diverticular disease. With young stem edible portion, its cell number and size contribute to the stem crude fiber content. The mathematical approach of allometry of cell size, number, and fiber content of stem could be used in determining the 'best' plant density pressure in producing the quality young stem to be consumed. Basically, allometry is the ratio of relative increment (growth or change) rates of two parameters, or the change rate associated to the log of measured variables relationship. Kangkog grown equal or lower than 55 plants m-2 produced bigger individual plant and good quality (physical) kangkong leafy vegetable, but with lower total yield per unit area as compared to those grown at higher densities.

  15. Determination of size of molecular clusters of ethanol by means of NMR diffusometry and hydrodynamic calculations

    Šoltésová, M.; Benda, L.; Peksa, M.; Czernek, Jiří; Lang, J.

    2014-01-01

    Roč. 118, č. 24 (2014), s. 6864-6874 ISSN 1520-6106 Institutional support: RVO:61389013 Keywords : diffusion * NMR * molecular Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.302, year: 2014

  16. Self-determined motivation in physical education and its links to motivation for leisure-time physical activity, physical activity, and well-being in general.

    Bagøien, Tor Egil; Halvari, Hallgeir; Nesheim, Hallgeir

    2010-10-01

    The present study tested a trans-contextual model based on self-determination theory of the relations between motivation in physical education, motivation in leisure-time physical activity, physical activity, and psychological well-being. Participants were 329 Norwegian upper secondary school students (M age = 16.5 yr., SD = 0.7). Students' perceptions of autonomy-supportive teachers in physical education were expected to be positively associated with students' psychological needs satisfaction in physical education, which was expected to be positively related to autonomous motivation for physical education participation. In turn, autonomous motivation for physical education was expected to be positively associated with perceived competence and autonomous motivation for leisure-time physical activity, which both were expected to be positively associated with leisure-time physical activity and psychological well-being in general. Structural equation models and bootstrapping supported the hypotheses and the indirect links between variables. Sex differences indicate that more research is needed on how to motivate girls to be more physically active in leisure time.

  17. Influence of the glass particle size on the foaming process and physical characteristics of foam glasses

    König, Jakob; Petersen, Rasmus Rosenlund; Yue, Yuanzheng

    2016-01-01

    We have prepared low-density foam glasses from cathode-ray-tube panel glass using carbon and MnO2 as the foaming agents. The effect of the glass particle size on the foaming process, the apparent density and the pore morphology is revealed. The results show that the foaming is mainly caused...... by the reduction of manganese. Foam glasses with a density of

  18. Predation and physical environment structure the density and population size structure of zebra mussels

    Naddafi, Rahmat; Pettersson, Kurt; Eklöv, Peter

    2010-01-01

    The zebra mussel (Dreissena polymorpha) provides one example of successful invaders in novel environments. However, little attention has been devoted to exploring the factors regulating zebra mussel density and population size structure at the local scale. We tested effects of physicochemical factors and fish predation on the density of zebra mussels at several sites and between years in a natural lake. Water depth and roach (Rutilus rutilus) density were the most important variables affectin...

  19. Echocardiographic evaluation of changes in left ventricular size and valvular regurgitation associated with physical training during and after maturity in standardbred trotters

    Buhl, Rikke; Ersbøll, Annette Kjær

    2012-01-01

    To assess whether physical training induces cardiac hypertrophy and valvular regurgitation in maturing Standardbred trotters and to establish a prediction model for the size of the left ventricle.......To assess whether physical training induces cardiac hypertrophy and valvular regurgitation in maturing Standardbred trotters and to establish a prediction model for the size of the left ventricle....

  20. Characterization of ambient particles size in workplace of manufacturing physical fitness equipments

    LIN, Chih-Chung; CHEN, Mei-Ru; CHANG, Sheng-Lang; LIAO, Wei-Heng; CHEN, Hsiu-Ling

    2014-01-01

    The manufacturing of fitness equipment involves several processes, including the cutting and punching of iron tubes followed by welding. Welding operations produce hazardous gases and particulate matter, which can enter the alveolar, resulting in adverse health effects. This study sought to verify the particle size distribution and exposure concentrations of atmospheric air samples in various work areas of a fitness equipment manufacturing industry. Observed particle concentrations are presented by area and in terms of relative magnitude: painting (15.58 mg/m3) > automatic welding (0.66 mg/m3) > manual welding (0.53 mg/m3) > punching (0.18 mg/m3) > cutting (0.16 mg/m3). The concentrations in each of the five work areas were Cinh>Cthor>Cresp. In all areas except the painting area, extra-fine particles produced by welding at high temperatures, and further those coagulated to form larger particles. This study observed bimodal distribution in the size of welding fume in the ranges of 0.7–1 µm and 15–21 µm. Meanwhile, the mass concentrations of particles with different sizes were not consistent across work areas. In the painting area, the mass concentration was higher in Chead>Cth>Calv, but in welding areas, it was found that Calv>Chead>Cth. Particles smaller than 1µm were primarily produced by welding. PMID:25327301

  1. Autocatalytic microtubule nucleation determines the size and mass of Xenopus laevis egg extract spindles.

    Decker, Franziska; Oriola, David; Dalton, Benjamin; Brugués, Jan

    2018-01-11

    Regulation of size and growth is a fundamental problem in biology. A prominent example is the formation of the mitotic spindle, where protein concentration gradients around chromosomes are thought to regulate spindle growth by controlling microtubule nucleation. Previous evidence suggests that microtubules nucleate throughout the spindle structure. However, the mechanisms underlying microtubule nucleation and its spatial regulation are still unclear. Here, we developed an assay based on laser ablation to directly probe microtubule nucleation events in Xenopus laevis egg extracts. Combining this method with theory and quantitative microscopy, we show that the size of a spindle is controlled by autocatalytic growth of microtubules, driven by microtubule-stimulated microtubule nucleation. The autocatalytic activity of this nucleation system is spatially regulated by the limiting amounts of active microtubule nucleators, which decrease with distance from the chromosomes. This mechanism provides an upper limit to spindle size even when resources are not limiting. © 2018, Decker et al.

  2. Aerosol particle size does not predict pharmacokinetic determined lung dose in children

    Bønnelykke, Klaus; Chawes, Bo L K; Vindfeld, Signe

    2013-01-01

    In vitro measures of aerosol particles size, such as the fine particle mass, play a pivotal role for approval of inhaled anti-asthmatic drugs. However, the validity as a measure of dose to the lungs in children lacks evidence. In this study we investigated for the first time the association between...... an in vivo estimate of lung dose of inhaled drug in children and the corresponding particle size segments assessed ex vivo. Lung dose of fluticasone propionate after inhalation from a dry powder inhaler (Diskus®) was studied in 23 children aged 4-7 and 12-15 years with mild asthma. Six-hour pharmacokinetics...... was assessed after single inhalation. The corresponding emitted mass of drug in segments of aerosol particle size was assessed ex vivo by replicating the inhalation flows recorded by transducers built into the Diskus® inhaler and re-playing them in a breathing simulator. There was no correlation between any...

  3. Determination of plasma frequency, damping constant, and size distribution from the complex dielectric function of noble metal nanoparticles

    Mendoza Herrera, Luis J.; Arboleda, David Muñetón [Centro de Investigaciones Ópticas (CIOp), (CONICET La Plata-CIC) (Argentina); Schinca, Daniel C.; Scaffardi, Lucía B., E-mail: lucias@ciop.unlp.edu.ar [Centro de Investigaciones Ópticas (CIOp), (CONICET La Plata-CIC) (Argentina); Departamento de Ciencias Básicas, Facultad de Ingeniería, UNLP (Argentina)

    2014-12-21

    This paper develops a novel method for simultaneously determining the plasma frequency ω{sub P}   and the damping constant γ{sub free} in the bulk damped oscillator Drude model, based on experimentally measured real and imaginary parts of the metal refractive index in the IR wavelength range, lifting the usual approximation that restricts frequency values to the UV-deep UV region. Our method was applied to gold, silver, and copper, improving the relative uncertainties in the final values for ω{sub p} (0.5%–1.6%) and for γ{sub free} (3%–8%), which are smaller than those reported in the literature. These small uncertainties in ω{sub p} and γ{sub free} determination yield a much better fit of the experimental complex dielectric function. For the case of nanoparticles (Nps), a series expansion of the Drude expression (which includes ω{sub p} and γ{sub free} determined using our method) enables size-dependent dielectric function to be written as the sum of three terms: the experimental bulk dielectric function plus two size corrective terms, one for free electron, and the other for bound-electron contributions. Finally, size distribution of nanometric and subnanometric gold Nps in colloidal suspension was determined through fitting its experimental optical extinction spectrum using Mie theory based on the previously determined dielectric function. Results are compared with size histogram obtained from Transmission Electron Microscopy (TEM)

  4. Determinants of Gratuity Size in the Czech Republic: Evidence from Four Inexpensive Restaurants in Brno

    Kvasnička Michal

    2015-06-01

    Full Text Available The paper presents the results of the first study exploring what factors influence tipping in restaurants in the Czech Republic. It shows that the tipping norm evolved here into a form that has some features similar to the tipping norms known in the USA, Canada, and Israel, but there are also striking differences. As in the three countries, the gratuity increases with the bill size but the gratuity as percentage of the bill is much lower here. The bill size explains here a lower part of the gratuity variability too. Also, the service quality results in customers being more generous with their tips, and though the increase in gratuity seems to be small, it rises with a group size. Strikingly, the regular patrons tip significantly less in the Czech Republic and they stiff more often. This supports the hypothesis that the relationship between the customer frequency and the gratuity size is an artifact of a missing variable, and the regular patrons tip differently because they belong to a different social group than occasional customers. Also, the customers paying by card stiff more often here and the interaction between the amount on the bill and use of payment card is statistically insignificant. The group size lowers the percentage gratuity, which supports the diffusion of the responsibility hypothesis. There are differences between genders: Male customers leave bigger tips than female customers, and female waitresses earn more than their male colleagues. The time spent at the table, consumption of alcoholic beverage, and smoking do not change the gratuity size but it may be affected by the weather conditions. The customers tip less and stiff more often when they order a lunch special. They round the total expenditures, not the gratuities, which creates the magnitude effect.

  5. Physical Activity Motivation: A Practitioner's Guide to Self-Determination Theory.

    Kilpatrick, Marcus; Hebert, Edward; Jacobsen, Dee

    2002-01-01

    Describes the relationship of self-determination theory to elective physical activity motivation, offering the following recommendations for physical activity practitioners: give positive feedback, promote moderately difficult goals, provide choice of activities, provide a rational for activities, promote the development of social relationships,…

  6. Determinants of Dutch general practitioners’ nutrition and physical activity guidance practices

    Hiddink, G.J.; Woerkum, van C.M.J.; Dillen, van S.M.E.

    2013-01-01

    Objective General practitioners (GP) are uniquely placed to guide their patients on nutrition and physical activity. The aims of the present study were to assess: (i) the extent to which GP guide on nutrition and physical activity; (ii) the determinants that cause GP to give guidance on nutrition

  7. Physical Attractiveness, Age, and Sex as Determinants of Reactions to Resumes.

    Quereshi, M. Y.; Kay, Janet P.

    1986-01-01

    Physical attractiveness, age, and sex were manipulated to determine their effect on the evaluation of 54 hypothetical applicants' resumes for three different jobs by 60 Master's in Business Administration students. Physical attractiveness favorably influenced the suitability ratings for all jobs; raters' sex and age were not significant but…

  8. Self-determination theory and understanding of student motivation in physical education instruction

    Đorđić Višnja

    2010-01-01

    Full Text Available Physical education is considered to be a favorable context for accomplishment of important educational outcomes and promotion of physical activity in children and youth. The real scope of physical education instruction largely depends on student motivation. Self-determination theory, as a specific macrotheory of motivation, offers a rewarding framework for understanding student motivation in physical education instruction. The paper presents the basic tenets of self-determination theory, the most important studies in the domain of physical education and didactic and methodical implications. Two mini-theories within the self-determination theory are analyzed in more detail, the cognitive evaluation theory and the organismic integration theory. Empirical verification of the theoretical tenets indicates the existence of typical motivational profiles of students in physical education instruction, the basic psychological needs as mediators of influence of social and interpersonal factors on student motivation, followed by the importance of motivational climate, students' goal orientations and teaching style for self-determination of students' behavior in physical education instruction. Didactic and methodical implications refer to the need for developing a more flexible curriculum of physical education, encouraging a motivational climate, task-focused goal orientations, and, especially, encouraging the perceived moving competence of the student.

  9. Determinants of Awareness, Consideration, and Choice Set Size in University Choice.

    Dawes, Philip L.; Brown, Jennifer

    2002-01-01

    Developed and tested a model of students' university "brand" choice using five individual-level variables (ethnic group, age, gender, number of parents going to university, and academic ability) and one situational variable (duration of search) to explain variation in the sizes of awareness, consideration, and choice decision sets. (EV)

  10. Determining The Optimal Order Picking Batch Size In Single Aisle Warehouses

    T. Le-Duc (Tho); M.B.M. de Koster (René)

    2002-01-01

    textabstractThis work aims at investigating the influence of picking batch size to average time in system of orders in a one-aisle warehouse under the assumption that order arrivals follow a Poisson process and items are uniformly distributed over the aisle's length. We model this problem as an

  11. Sample size determination for a three-arm equivalence trial of Poisson and negative binomial responses.

    Chang, Yu-Wei; Tsong, Yi; Zhao, Zhigen

    2017-01-01

    Assessing equivalence or similarity has drawn much attention recently as many drug products have lost or will lose their patents in the next few years, especially certain best-selling biologics. To claim equivalence between the test treatment and the reference treatment when assay sensitivity is well established from historical data, one has to demonstrate both superiority of the test treatment over placebo and equivalence between the test treatment and the reference treatment. Thus, there is urgency for practitioners to derive a practical way to calculate sample size for a three-arm equivalence trial. The primary endpoints of a clinical trial may not always be continuous, but may be discrete. In this paper, the authors derive power function and discuss sample size requirement for a three-arm equivalence trial with Poisson and negative binomial clinical endpoints. In addition, the authors examine the effect of the dispersion parameter on the power and the sample size by varying its coefficient from small to large. In extensive numerical studies, the authors demonstrate that required sample size heavily depends on the dispersion parameter. Therefore, misusing a Poisson model for negative binomial data may easily lose power up to 20%, depending on the value of the dispersion parameter.

  12. A novel method for determination of particle size distribution in-process

    Salaoru, Tiberiu A.; Li, Mingzhong; Wilkinson, Derek

    2009-07-01

    The pharmaceutical and fine chemicals industries are strongly concerned with the manufacture of high value-added speciality products, often in solid form. On-line measurement of solid particle size is vital for reliable control of product properties. The established techniques, such as laser diffraction or spectral extinction, require dilution of the process suspension when measuring from typical manufacturing streams because of their high concentration. Dilution to facilitate measurement can result in changes of both size and form of particles, especially during production processes such as crystallisation. In spectral extinction, the degree of light scattering and absorption by a suspension is measured. However, for concentrated suspensions the interpretation of light extinction measurements is difficult because of multiple scattering and inter-particle interaction effects and at higher concentrations extinction is essentially total so the technique can no longer be applied. At the same time, scattering by a dispersion also causes a change of phase which affects the real component of the suspension's effective refractive index which is a function of particle size and particle and dispersant refractive indices. In this work, a novel prototype instrument has been developed to measure particle size distribution in concentrated suspensions in-process by measuring suspension refractive index at incidence angles near the onset of total internal reflection. Using this technique, the light beam does not pass through the suspension being measured so suspension turbidity does not impair the measurement.

  13. X-ray determination of crystallite size and effect of lattice strain on ...

    X-ray diffraction; lattice strain; crystallite size; Debye–Waller factor; vacancy formation energy. 1. Introduction ... In the present investigation, results of a system- atic study of .... that while milling is enough to create strains, it affects the particle ...

  14. An integrated approach for determining the size of hardwood group-selection openings

    Chris B. LeDoux

    1999-01-01

    The use of group-selection methods is becoming more widespread as landowners and forest managers attempt to respond to public pressure to reduce the size of clearcut blocks. Several studies have shown that harvesting timber in smaller groups or clumps increases the cost of operations for both cable and ground-based logging systems. Recent regeneration studies have...

  15. Validation of a particle tracking analysis method for the size determination of nano- and microparticles

    Kestens, Vikram; Bozatzidis, Vassili; De Temmerman, Pieter-Jan; Ramaye, Yannic; Roebben, Gert

    2017-08-01

    Particle tracking analysis (PTA) is an emerging technique suitable for size analysis of particles with external dimensions in the nano- and sub-micrometre scale range. Only limited attempts have so far been made to investigate and quantify the performance of the PTA method for particle size analysis. This article presents the results of a validation study during which selected colloidal silica and polystyrene latex reference materials with particle sizes in the range of 20 nm to 200 nm were analysed with NS500 and LM10-HSBF NanoSight instruments and video analysis software NTA 2.3 and NTA 3.0. Key performance characteristics such as working range, linearity, limit of detection, limit of quantification, sensitivity, robustness, precision and trueness were examined according to recommendations proposed by EURACHEM. A model for measurement uncertainty estimation following the principles described in ISO/IEC Guide 98-3 was used for quantifying random and systematic variations. For nominal 50 nm and 100 nm polystyrene and a nominal 80 nm silica reference materials, the relative expanded measurement uncertainties for the three measurands of interest, being the mode, median and arithmetic mean of the number-weighted particle size distribution, varied from about 10% to 12%. For the nominal 50 nm polystyrene material, the relative expanded uncertainty of the arithmetic mean of the particle size distributions increased up to 18% which was due to the presence of agglomerates. Data analysis was performed with software NTA 2.3 and NTA 3.0. The latter showed to be superior in terms of sensitivity and resolution.

  16. Coconut genome size determined by flow cytometry: Tall versus Dwarf types.

    Freitas Neto, M; Pereira, T N S; Geronimo, I G C; Azevedo, A O N; Ramos, S R R; Pereira, M G

    2016-02-11

    Coconuts (Cocos nucifera L.) are tropical palm trees that are classified into Tall and Dwarf types based on height, and both types are diploid (2n = 2x = 32 chromosomes). The reproduction mode is autogamous for Dwarf types and allogamous for Tall types. One hypothesis for the origin of the Dwarf coconut suggests that it is a Tall variant that resulted from either mutation or inbreeding, and differences in genome size between the two types would support this hypothesis. In this study, we estimated the genome sizes of 14 coconut accessions (eight Tall and six Dwarf types) using flow cytometry. Nuclei were extracted from leaf discs and stained with propidium iodide, and Pisum sativum (2C = 9.07 pg DNA) was used as an internal standard. Histograms with good resolution and low coefficients of variation (2.5 to 3.2%) were obtained. The 2C DNA content ranged from 5.72 to 5.48 pg for Tall accessions and from 5.58 to 5.52 pg for Dwarf accessions. The mean genome sizes for Tall and Dwarf specimens were 5.59 and 5.55 pg, respectively. Among all accessions, Rennel Island Tall had the highest mean DNA content (5.72 pg), whereas West African Tall had the lowest (5.48 pg). The mean coconut genome size (2C = 5.57 pg, corresponding to 2723.73 Mbp/haploid set) was classified as small. Only small differences in genome size existed among the coconut accessions, suggesting that the Dwarf type did not evolve from the Tall type.

  17. Grain size determination in zirconium alloys. Final report of a co-ordinated research programme, 1989-1992

    1995-04-01

    A research programme was planned as an exercise to establish procedures and evaluate the success of technology transfer. The first programme under this scheme was proposed by the IAEA on the research topic: grain size determination in zirconium alloys. The host laboratory was Siemens AG Erlangen, in Germany. The programme was supervised by experts selected from participating countries. This report contains the results of the work carried out under this programme. The grain size of Zircaloy, the measurement methods, distribution of grain size in the matrix and dependence of grain size on temperature time of annealing are discussed in this report. The report also includes some information on the organizational arrangements and discusses possibilities for future collaboration. 38 figs, 11 tabs

  18. Derivative load voltage and particle swarm optimization to determine optimum sizing and placement of shunt capacitor in improving line losses

    Mohamed Milad Baiek

    2016-12-01

    Full Text Available The purpose of this research is to study optimal size and placement of shunt capacitor in order to minimize line loss. Derivative load bus voltage was calculated to determine the sensitive load buses which further being optimum with the placement of shunt capacitor. Particle swarm optimization (PSO was demonstrated on the IEEE 14 bus power system to find optimum size of shunt capacitor in reducing line loss. The objective function was applied to determine the proper placement of capacitor and get satisfied solutions towards constraints. The simulation was run over Matlab under two scenarios namely base case and increasing 100% load. Derivative load bus voltage was simulated to determine the most sensitive load bus. PSO was carried out to determine the optimum sizing of shunt capacitor at the most sensitive bus. The results have been determined that the most sensitive bus was bus number 14 for the base case and increasing 100% load. The optimum sizing was 8.17 Mvar for the base case and 23.98 Mvar for increasing load about 100%. Line losses were able to reduce approximately 0.98% for the base case and increasing 100% load reduced about 3.16%. The proposed method was also proven as a better result compared with harmony search algorithm (HSA method. HSA method recorded loss reduction ratio about 0.44% for the base case and 2.67% when the load was increased by 100% while PSO calculated loss reduction ratio about 1.12% and 4.02% for the base case and increasing 100% load respectively. The result of this study will support the previous study and it is concluded that PSO was successfully able to solve some engineering problems as well as to find a solution in determining shunt capacitor sizing on the power system simply and accurately compared with other evolutionary optimization methods.

  19. Determination of User Distribution Image Size and Position of Each Observation Area of Meteorological Imager in COMS

    Jeong-Soo Seo

    2006-12-01

    Full Text Available In this paper, requirements of Meteorological Administration about Meteorological Imager (MI of Communications, Ocean and Meteorological Satellite (COMS is analyzed for the design of COMS ground station and according to the analysis results, the distribution image size of each observation area suitable for satellite Field Of View (FOV stated at the requirements of meteorological administration is determined and the precise satellite FOV and the size of distribution image is calculated on the basis of the image size of the determined observation area. The results in this paper were applied to the detailed design for COMS ground station and also are expected to be used for the future observation scheduling and the scheduling of distribution of user data.

  20. Size-exclusion chromatography for the determination of the boiling point distribution of high-boiling petroleum fractions.

    Boczkaj, Grzegorz; Przyjazny, Andrzej; Kamiński, Marian

    2015-03-01

    The paper describes a new procedure for the determination of boiling point distribution of high-boiling petroleum fractions using size-exclusion chromatography with refractive index detection. Thus far, the determination of boiling range distribution by chromatography has been accomplished using simulated distillation with gas chromatography with flame ionization detection. This study revealed that in spite of substantial differences in the separation mechanism and the detection mode, the size-exclusion chromatography technique yields similar results for the determination of boiling point distribution compared with simulated distillation and novel empty column gas chromatography. The developed procedure using size-exclusion chromatography has a substantial applicability, especially for the determination of exact final boiling point values for high-boiling mixtures, for which a standard high-temperature simulated distillation would have to be used. In this case, the precision of final boiling point determination is low due to the high final temperatures of the gas chromatograph oven and an insufficient thermal stability of both the gas chromatography stationary phase and the sample. Additionally, the use of high-performance liquid chromatography detectors more sensitive than refractive index detection allows a lower detection limit for high-molar-mass aromatic compounds, and thus increases the sensitivity of final boiling point determination. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Determination of the surface area and sizes of supported copper nanoparticles through organothiol adsorption—ñhemisorption

    Ndolomingo, Matumuene Joe; Meijboom, Reinout, E-mail: rmeijboom@uj.ac.za

    2016-12-30

    Highlights: • Cu on γ-Al{sub 2}O{sub 3} catalysts were prepared and characterized. • The ligand sorption-based technique was used for the determination of specific surface area and particle sizes. • The ligand packing density on Cu nanoparticles was quantified. • A fair agreement was found between the Cu particle sizes obtained from ligand adsorption and TEM methods. • The oxidation of morin by hydrogen peroxide was used to evaluate the catalytic activities of the Cu supported catalysts. - Abstract: The mechanisms involving the nanoparticle surfaces in catalytic reactions are more difficult to elucidate due to the nanoparticle surface unevenness, size distributions, and morphological irregularity. True surface area and particle sizes determination are key aspects of the activity of metal nanoparticle catalysts. Here we report on the organothiol adsorption-based technique for the determination of specific surface area of Cu nanoparticles, and their resultant sizes on γ-Al{sub 2}O{sub 3} supports. Quantification of ligand packing density on copper nanoparticles is also reported. The concentration of the probe ligand, 2-mercaptobenzimidazole (2-MBI) before and after immersion of supported copper catalysts was determined by ultraviolet-visible spectrometry (UV–vis). The amount of ligand adsorbed was found to be proportional to the copper nanoparticles surface area. Atomic absorption spectrometry (AAS), N{sub 2}-physisorption (BET), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were used for the characterization of the catalysts. A fair agreement was found between particle sizes obtained from ligand adsorption and TEM methods. The catalytic activity of the copper nanoparticles related to their inherent surface area was evaluated using the model reaction of the oxidation of morin by hydrogen peroxide.

  2. Interaction of aberrations, diffraction, and quantal fluctuations determine the impact of pupil size on visual quality.

    Xu, Renfeng; Wang, Huachun; Thibos, Larry N; Bradley, Arthur

    2017-04-01

    Our purpose is to develop a computational approach that jointly assesses the impact of stimulus luminance and pupil size on visual quality. We compared traditional optical measures of image quality and those that incorporate the impact of retinal illuminance dependent neural contrast sensitivity. Visually weighted image quality was calculated for a presbyopic model eye with representative levels of chromatic and monochromatic aberrations as pupil diameter was varied from 7 to 1 mm, stimulus luminance varied from 2000 to 0.1  cd/m2, and defocus varied from 0 to -2 diopters. The model included the effects of quantal fluctuations on neural contrast sensitivity. We tested the model's predictions for five cycles per degree gratings by measuring contrast sensitivity at 5  cyc/deg. Unlike the traditional Strehl ratio and the visually weighted area under the modulation transfer function, the visual Strehl ratio derived from the optical transfer function was able to capture the combined impact of optics and quantal noise on visual quality. In a well-focused eye, provided retinal illuminance is held constant as pupil size varies, visual image quality scales approximately as the square root of illuminance because of quantum fluctuations, but optimum pupil size is essentially independent of retinal illuminance and quantum fluctuations. Conversely, when stimulus luminance is held constant (and therefore illuminance varies with pupil size), optimum pupil size increases as luminance decreases, thereby compensating partially for increased quantum fluctuations. However, in the presence of -1 and -2 diopters of defocus and at high photopic levels where Weber's law operates, optical aberrations and diffraction dominate image quality and pupil optimization. Similar behavior was observed in human observers viewing sinusoidal gratings. Optimum pupil size increases as stimulus luminance drops for the well-focused eye, and the benefits of small pupils for improving defocused image

  3. Cohort Size, Sex and Socio-Economic Status as Predictors of Success in Year 12 Physics in Perth, 1987-1997

    Geelan, David; Louden, William; Wildy, Helen

    2013-01-01

    A variety of factors are associated with students' achievement in secondary school physics, including cohort size--the total number of students studying Physics in the school--and socioeconomic status. Earlier studies also showed boys achieving better in Physics, while more recent research has shown better results for girls. Statistical analysis…

  4. Diet, body size, physical activity and risk of prostate cancer: An umbrella review of the evidence.

    Markozannes, Georgios; Tzoulaki, Ioanna; Karli, Dimitra; Evangelou, Evangelos; Ntzani, Evangelia; Gunter, Marc J; Norat, Teresa; Ioannidis, John P; Tsilidis, Konstantinos K

    2016-12-01

    The existing literature on the relationship between diet, body size, physical activity and prostate cancer risk was summarised by the World Cancer Research Fund Continuous Update Project (CUP). An evaluation of the robustness of this evidence is required to help inform public health policy. The robustness of this evidence was evaluated using several criteria addressing evidence strength and validity, including the statistical significance of the random effects summary estimate and of the largest study in a meta-analysis, number of prostate cancer cases, between-study heterogeneity, 95% prediction intervals, small-study effects bias, excess significance bias and sensitivity analyses with credibility ceilings. A total of 248 meta-analyses were extracted from the CUP, which studied associations of 23 foods, 31 nutrients, eight indices of body size and three indices of physical activity with risk of total prostate cancer development, mortality or cancer development by stage and grade. Of the 176 meta-analyses using a continuous scale to measure the exposures, no association presented strong evidence by satisfying all the aforementioned criteria. Only the association of height with total prostate cancer incidence and mortality presented highly suggestive evidence with a 4% higher risk per 5 cm greater height (95% confidence interval, 1.03, 1.05). Associations for body mass index, weight, height, dietary calcium and spirits intake were supported by suggestive evidence. Overall, the association of diet, body size, physical activity and prostate cancer has been extensively studied, but no association was graded with strong evidence. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Nanoparticle amount, and not size, determines chain alignment and nonlinear hardening in polymer nanocomposites

    Varol, H. Samet; Meng, Fanlong; Hosseinkhani, Babak; Malm, Christian; Bonn, Daniel; Bonn, Mischa; Zaccone, Alessio

    2017-01-01

    Polymer nanocomposites—materials in which a polymer matrix is blended with nanoparticles (or fillers)—strengthen under sufficiently large strains. Such strain hardening is critical to their function, especially for materials that bear large cyclic loads such as car tires or bearing sealants. Although the reinforcement (i.e., the increase in the linear elasticity) by the addition of filler particles is phenomenologically understood, considerably less is known about strain hardening (the nonlinear elasticity). Here, we elucidate the molecular origin of strain hardening using uniaxial tensile loading, microspectroscopy of polymer chain alignment, and theory. The strain-hardening behavior and chain alignment are found to depend on the volume fraction, but not on the size of nanofillers. This contrasts with reinforcement, which depends on both volume fraction and size of nanofillers, potentially allowing linear and nonlinear elasticity of nanocomposites to be tuned independently. PMID:28377517

  6. Determination of nanoparticle size distribution together with density or molecular weight by 2D analytical ultracentrifugation

    Carney, Randy P.; Kim, Jin Young; Qian, Huifeng; Jin, Rongchao; Mehenni, Hakim; Stellacci, Francesco; Bakr, Osman

    2011-01-01

    Nanoparticles are finding many research and industrial applications, yet their characterization remains a challenge. Their cores are often polydisperse and coated by a stabilizing shell that varies in size and composition. No single technique can characterize both the size distribution and the nature of the shell. Advances in analytical ultracentrifugation allow for the extraction of the sedimentation (s) and diffusion coefficients (D). Here we report an approach to transform the s and D distributions of nanoparticles in solution into precise molecular weight (M), density (?P) and particle diameter (dp) distributions. M for mixtures of discrete nanocrystals is found within 4% of the known quantities. The accuracy and the density information we achieve on nanoparticles are unparalleled. A single experimental run is sufficient for full nanoparticle characterization, without the need for standards or other auxiliary measurements. We believe that our method is of general applicability and we discuss its limitations. 2011 Macmillan Publishers Limited. All rights reserved.

  7. Distribution Functions of Sizes and Fluxes Determined from Supra-Arcade Downflows

    McKenzie, D.; Savage, S.

    2011-01-01

    The frequency distributions of sizes and fluxes of supra-arcade downflows (SADs) provide information about the process of their creation. For example, a fractal creation process may be expected to yield a power-law distribution of sizes and/or fluxes. We examine 120 cross-sectional areas and magnetic flux estimates found by Savage & McKenzie for SADs, and find that (1) the areas are consistent with a log-normal distribution and (2) the fluxes are consistent with both a log-normal and an exponential distribution. Neither set of measurements is compatible with a power-law distribution nor a normal distribution. As a demonstration of the applicability of these findings to improved understanding of reconnection, we consider a simple SAD growth scenario with minimal assumptions, capable of producing a log-normal distribution.

  8. Determination of nanoparticle size distribution together with density or molecular weight by 2D analytical ultracentrifugation

    Carney, Randy P.

    2011-06-07

    Nanoparticles are finding many research and industrial applications, yet their characterization remains a challenge. Their cores are often polydisperse and coated by a stabilizing shell that varies in size and composition. No single technique can characterize both the size distribution and the nature of the shell. Advances in analytical ultracentrifugation allow for the extraction of the sedimentation (s) and diffusion coefficients (D). Here we report an approach to transform the s and D distributions of nanoparticles in solution into precise molecular weight (M), density (?P) and particle diameter (dp) distributions. M for mixtures of discrete nanocrystals is found within 4% of the known quantities. The accuracy and the density information we achieve on nanoparticles are unparalleled. A single experimental run is sufficient for full nanoparticle characterization, without the need for standards or other auxiliary measurements. We believe that our method is of general applicability and we discuss its limitations. 2011 Macmillan Publishers Limited. All rights reserved.

  9. Otolith shape and size: The importance of age when determining indices for fish-stock separation

    Mapp, James; Hunter, Ewan; Van Der Kooij, Jeroen; Songer, Sally; Fisher, Mark

    2017-01-01

    Stock-separation of highly mobile Clupeids (sprat – Sprattus sprattus and herring – Clupea harengus) using otolith morphometrics was explored. Analysis focused on three stock discrimination problems with the aim of reassigning individual otoliths to source populations using experiments undertaken using a machine learning environment known as \\{WEKA\\} (Waikato Environment for Knowledge Analysis). Six feature sets encoding combinations of size and shape together with nine learning algorithms we...

  10. Determination of aerosol size distributions at uranium mill tailings remedial action project sites

    Newton, G.J.; Reif, R.H.; Hoover, M.D.

    1994-01-01

    The U.S. Department of Energy (DOE) has an ongoing program, the Uranium Mill Tailings Remedial Action (UMTRA) Project, to stabilize piles of uranium mill tailings in order to reduce the potential radiological hazards to the public. Protection of workers and the general public against airborne radioactivity during remedial action is a top priority at the UMTRA Project. The primary occupational radionuclides of concern are 230 Th, 226 Ra, 210 Pb, 210 Po, and the short-lived decay products of 222 Rn with 230 Th causing the majority of the committed effective dose equivalent (CEDE) from inhaling uranium mill tailings. Prior to this study, a default particle size of 1.0 μm activity median aerodynamic diameter (AMAD) was assumed for airborne radioactive tailings dust. Because of recent changes in DOE requirements, all DOE operations are now required to use the CEDE methodology, instead of the annual effective dose equivalent (AEDE) methodology, to evaluate internal radiation exposures. Under the transition from AEDE to CEDE, with a 1.0 μm AMAD particle size, lower bioassay action levels would be required for the UMTRA Project. This translates into an expanded internal dosimetry program where significantly more bioassay monitoring would be required at the UMTRA Project sites. However, for situations where the particle size distribution is known to differ significantly from 1.0 μm AMAD, the DOE allows for corrections to be made to both the estimated dose to workers and the derived air concentration (DAC) values. For particle sizes larger than 1.0 μm AMAD, the calculated CEDE from inhaling tailings would be relatively lower

  11. Population regulation in Magellanic penguins: what determines changes in colony size?

    Luciana M Pozzi

    Full Text Available Seabirds are often studied at individual colonies, but the confounding effects of emigration and mortality processes in open populations may lead to inappropriate conclusions on the mechanisms underlying population changes. Magellanic penguin (Spheniscus magellanicus colonies of variable population sizes are distributed along the Argentine coastline. In recent decades, several population and distributional changes have occurred, with some colonies declining and others newly established or increasing. We integrated data of eight colonies scattered along ∼600 km in Northern Patagonia (from 41°26´S, 65°01´W to 45°11´S, 66°30´W, Rio Negro and Chubut provinces and conducted analysis in terms of their growth rates, production of young and of the dependence of those vital rates on colony age, size, and location. We contrasted population trends estimated from abundance data with those derived from population modeling to understand if observed growth rates were attainable under closed population scenarios. Population trends were inversely related to colony size, suggesting a density dependent growth pattern. All colonies located in the north--which were established during the last decades--increased at high rates, with the smallest, recently established colonies growing at the fastest rate. In central-southern Chubut, where colonies are the oldest, the largest breeding aggregations declined, but smaller colonies remained relatively stable. Results provided strong evidence that dispersal played a major role in driving local trends. Breeding success was higher in northern colonies, likely mediated by favorable oceanographic conditions. However, mean foraging distance and body condition of chicks at fledging were influenced by colony size. Recruitment of penguins in the northern area may have been triggered by a combination of density dependence, likely exacerbated by less favorable oceanographic conditions in the southern sector. Our results

  12. Government for the People; On the Determinants of the Size of U.S. Government

    Tamim Bayoumi; Fernando M. Gonçalves

    2007-01-01

    Trends in the size of U.S. government are examined. In the postwar period, general government primary spending rose by ¼ percent of GDP a year through 1975, stabilizing thereafter. With higher social transfers offset by a lower burden of defense spending, expansion reflected a baby-boom driven rise in education spending. The parallel improvement in tax efficiency helped equate the benefits of higher spending with the costs from higher taxation, in accordance with a marginalist view of the siz...

  13. Coopetition Effect Determinants: Competitor’s Size, Geographical Scope, Market and Technological Positions

    Cygler Joanna

    2015-12-01

    Full Text Available Background and Goal: The article is aimed at conducting an empirical analysis of the value and significance of coopetitors’ attributes thanks to which coopetition, which is a combination of cooperation and competition between competitors, generates a substantial corporate profit. Four major competitors’ attributes have been analysed: its size, geographical scope, market and technological position. The research also includes the Porter’s value chain.

  14. Analysis of work ability and work-related physical activity of employees in a medium-sized business

    Wilke, Christiane; Ashton, Philip; Elis, Tobias; Biallas, Bianca; Frob?se, Ingo

    2015-01-01

    Background Work-related physical activity (PA) and work ability are of growing importance in modern working society. There is evidence for age- and job-related differences regarding PA and work ability. This study analyses work ability and work-related PA of employees in a medium-sized business regarding age and occupation. Methods The total sample consists of 148 employees (116 men?78.38?% of the sample?and 32 women, accounting for 21.62?%; mean age: 40.85???10.07?years). 100 subjects (67.57...

  15. Determination of hydraulic conductivity from grain-size distribution for different depositional environments

    Rosas, Jorge

    2013-06-06

    Over 400 unlithified sediment samples were collected from four different depositional environments in global locations and the grain-size distribution, porosity, and hydraulic conductivity were measured using standard methods. The measured hydraulic conductivity values were then compared to values calculated using 20 different empirical equations (e.g., Hazen, Carman-Kozeny) commonly used to estimate hydraulic conductivity from grain-size distribution. It was found that most of the hydraulic conductivity values estimated from the empirical equations correlated very poorly to the measured hydraulic conductivity values with errors ranging to over 500%. To improve the empirical estimation methodology, the samples were grouped by depositional environment and subdivided into subgroups based on lithology and mud percentage. The empirical methods were then analyzed to assess which methods best estimated the measured values. Modifications of the empirical equations, including changes to special coefficients and addition of offsets, were made to produce modified equations that considerably improve the hydraulic conductivity estimates from grain size data for beach, dune, offshore marine, and river sediments. Estimated hydraulic conductivity errors were reduced to 6 to 7.1m/day for the beach subgroups, 3.4 to 7.1m/day for dune subgroups, and 2.2 to 11m/day for offshore sediments subgroups. Improvements were made for river environments, but still produced high errors between 13 and 23m/day. © 2013, National Ground Water Association.

  16. Type-II generalized family-wise error rate formulas with application to sample size determination.

    Delorme, Phillipe; de Micheaux, Pierre Lafaye; Liquet, Benoit; Riou, Jérémie

    2016-07-20

    Multiple endpoints are increasingly used in clinical trials. The significance of some of these clinical trials is established if at least r null hypotheses are rejected among m that are simultaneously tested. The usual approach in multiple hypothesis testing is to control the family-wise error rate, which is defined as the probability that at least one type-I error is made. More recently, the q-generalized family-wise error rate has been introduced to control the probability of making at least q false rejections. For procedures controlling this global type-I error rate, we define a type-II r-generalized family-wise error rate, which is directly related to the r-power defined as the probability of rejecting at least r false null hypotheses. We obtain very general power formulas that can be used to compute the sample size for single-step and step-wise procedures. These are implemented in our R package rPowerSampleSize available on the CRAN, making them directly available to end users. Complexities of the formulas are presented to gain insight into computation time issues. Comparison with Monte Carlo strategy is also presented. We compute sample sizes for two clinical trials involving multiple endpoints: one designed to investigate the effectiveness of a drug against acute heart failure and the other for the immunogenicity of a vaccine strategy against pneumococcus. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  17. Determination of hydraulic conductivity from grain-size distribution for different depositional environments

    Rosas, Jorge; Lopez Valencia, Oliver Miguel; Missimer, Thomas M.; Coulibaly, Kapo M.; Dehwah, Abdullah; Sesler, Kathryn; Rodri­ guez, Luis R. Lujan; Mantilla, David

    2013-01-01

    Over 400 unlithified sediment samples were collected from four different depositional environments in global locations and the grain-size distribution, porosity, and hydraulic conductivity were measured using standard methods. The measured hydraulic conductivity values were then compared to values calculated using 20 different empirical equations (e.g., Hazen, Carman-Kozeny) commonly used to estimate hydraulic conductivity from grain-size distribution. It was found that most of the hydraulic conductivity values estimated from the empirical equations correlated very poorly to the measured hydraulic conductivity values with errors ranging to over 500%. To improve the empirical estimation methodology, the samples were grouped by depositional environment and subdivided into subgroups based on lithology and mud percentage. The empirical methods were then analyzed to assess which methods best estimated the measured values. Modifications of the empirical equations, including changes to special coefficients and addition of offsets, were made to produce modified equations that considerably improve the hydraulic conductivity estimates from grain size data for beach, dune, offshore marine, and river sediments. Estimated hydraulic conductivity errors were reduced to 6 to 7.1m/day for the beach subgroups, 3.4 to 7.1m/day for dune subgroups, and 2.2 to 11m/day for offshore sediments subgroups. Improvements were made for river environments, but still produced high errors between 13 and 23m/day. © 2013, National Ground Water Association.

  18. Physical and optical properties of size-selective CdTe nanocrystals

    Fok, Alice [Department of Chemistry, The City College of New York, CUNY New York, NY 10031 (United States); Morales, Jorge [Department of Biology, City College of New York, CUNY New York, NY 10031 (United States); Sohel, Mohammad [Natural Sciences Department, Hostos College, CUNY Bronx, NY 10451 (United States)

    2010-06-15

    Physical and optical properties of colloidal cadmium telluride nanocrystals (CdTe NCs) were investigated. The CdTe NCs were synthesized by reacting elemental tellurium dissolved in tributylphosphine with a mixture of cadmium oxide, octadecene, and oleic acid. These NCs, which were characterized by transmission electron microscopy (TEM) are spherical and ranged from 5 to 7 nm in diameter. The identity of the compound post-synthesis was confirmed by X-Ray diffraction (XRD) patterns. UV-Vis and photoluminescence (PL) properties as grown and pure CdTe samples were investigated. Bright excitonic photoluminescence emission was observed (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  19. Self-determined motivation and students' physical activity during structured physical education lessons and free choice periods.

    Lonsdale, Chris; Sabiston, Catherine M; Raedeke, Thomas D; Ha, Amy S C; Sum, Raymond K W

    2009-01-01

    Various organizations have suggested that physical education (PE) should play a central role in increasing adolescents' physical activity (PA) levels. The purpose of this study was to examine relationships between students' self-determined motivation and their PA behavior during a structured PE lesson led by their teacher and a free-choice period in which they were not required to be active. 528 Hong Kong students (mean age=15.78 years) participated in this study in April and May 2007. Situational Motivation Scale scores were used to form high and low self-determined motivation groups. Students wore a pedometer during a 20-minute structured basketball lesson and a 20-minute free choice period, during which they did not receive instruction. ANOVA revealed that self-determined motivation and PE class environments which provided students opportunities to make choices were related to greater PA. Furthermore, the difference in PA between the high and low self-determined groups was greater in the free-choice condition than the structured lesson, suggesting that self-determined motivation is especially important when students are not supervised. Findings indicated that promoting self-determined motivation may be an effective means of ensuring that PE programs are able to increase PA levels, foster self-initiated PA behaviors, and enhance adolescents' health.

  20. Limitations of Electronic Energy Transfer in the Determination of Lipid Nanodomain Sizes

    Šachl, Radek; Humpolíčková, Jana; Štefl, Martin; Johansson, L. B. A.; Hof, Martin

    2011-01-01

    Roč. 101, č. 11 (2011), L60-L62 ISSN 0006-3495 R&D Projects: GA ČR GAP208/10/1090; GA ČR GAP208/10/0376 Institutional research plan: CEZ:AV0Z40400503 Keywords : Foerster resonance energy transfer * nanodomains * Monte Carlo Setup Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.653, year: 2011

  1. Particle size determination of silver nanoparticles generated by plasma laser ablation using a deconvolution method

    Picciotto, A.; Torrisi, L.; Margarone, Daniele; Bellutti, P.

    2010-01-01

    Roč. 165, 6-10 (2010), s. 706-712 ISSN 1042-0150. [International Workshop on Pulsed Plasma Laser Ablation (PPLA)/4./. Monte Pieta, Messina, 18.06.2009-20.06.2009] Institutional research plan: CEZ:AV0Z10100522 Keywords : nanoparticles * plasma * laser ablation * surface plasmon resonance Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.660, year: 2010

  2. Determinants of physical activity among people with spinal cord injury: a test of social cognitive theory.

    Ginis, Kathleen A Martin; Latimer, Amy E; Arbour-Nicitopoulos, Kelly P; Bassett, Rebecca L; Wolfe, Dalton L; Hanna, Steven E

    2011-08-01

    Little theory-based research has focused on understanding and increasing physical activity among people with physical disabilities. Testing a social cognitive theory-based model of determinants is important for identifying variables to target in physical activity-enhancing interventions. The aim of this study is to examine Social Cognitive Theory variables as predictors of physical activity among people living with spinal cord injury. Structural equation modeling was used to test a model of Social Cognitive Theory predictors of physical activity (n=160). The model explained 39% of the variance in physical activity. Self-regulation was the only significant, direct predictor. Self-regulatory efficacy and outcome expectations had indirect effects, mediated by self-regulation. Social Cognitive Theory is useful for predicting physical activity in people with spinal cord injury. Self-regulation is the most potent Social Cognitive Theory predictor of physical activity in people with spinal cord injury. Self-regulation and its determinants should be targeted in physical activity-enhancing interventions.

  3. Effects of grinding method, particle size, and physical form of the diet on gastrointestinal morphology and jejunal glucose transport in laying hens.

    Röhe, I; Ruhnke, I; Knorr, F; Mader, A; Boroojeni, F Goodarzi; Löwe, R; Zentek, J

    2014-08-01

    Several studies illustrated that the structure of feed, i.e., the particle size, particle-size distribution, and the physical form of the diet, affects the avian gastrointestinal function and health leading to changes in productive performance. However, investigations concerning the effects of feeding differently processed diets on laying hens are limited and primarily concentrated on bird performance. The current study examines the effect of feed processing on the gastrointestinal morphology and on the jejunal glucose transport of laying hens. In 8 replicates, a total of 384 hens (Lohmann Brown) aged 20 wk were randomly allocated to 8 different groups and fed over a period of 21 d in a 3-factorial design. Diets differed in 1) grinding method, either hammer or roller mill; 2) physical form, either mash or expandate; and 3) particle size, either coarsely or finely ground. During the experimental trial, the laying performance of each feeding group was recorded daily and the feed intake and BW determined weekly. After slaughtering, the weights of the pancreas, proventriculus, gizzard, and small intestine were measured. Villus lengths and crypt depths of the duodenum, jejunum, and ileum were determined. The jejunal electrogenic glucose transport was studied in Ussing chambers. Hens that received mash instead of expandate had higher proventriculus (P = 0.011), gizzard (P feeding of coarsely instead of finely ground diets led to higher gizzard weights (P hens showed longer duodenal (P hens had higher glucose transport rates than expandate-fed hens (P feeding of coarsely ground as well as mash diets had stimulating effects on the development of the gastrointestinal organs. Moreover, the feeding of mash influenced the intestinal microstructure of the epithelium that was accompanied by higher glucose transport capacities. © Poultry Science Association Inc.

  4. Determinants of physical activity in primary school students using the health belief model.

    Ar-Yuwat, Sireewat; Clark, Mary Jo; Hunter, Anita; James, Kathy S

    2013-01-01

    Thailand is a middle-income country in which two-thirds of children demonstrate an insufficient level of physical activity. Physical inactivity is a major risk factor for obesity and many other health-related consequences in children. Thus, it is important to understand how primary school children perceive things in their daily life as determinants of physical activity. The purpose of this study was to investigate the impact of cues, perceived benefits, and perceived barriers on the level of physical activity among primary school students. A cross-sectional study was conducted in Phitsanulok Province, Thailand, in 2011. Multistage sampling selected a total of 123 primary school students. The Physical Activity Questionnaire for Older Children and the Cues, Perceived Benefits, and Barriers to Physical Activity Questionnaire were used to assess the student levels of physical activity, as well as the perceived benefits, barriers, and cues to action. The association between these factors and the level of physical activity was determined by correlation statistics and confirmed by robust regression. Multivariate analysis of variance compared health belief model determinants: perceived benefits, perceived barriers, and cues to action on physical activity between male and female students. Self-administered questionnaires were validated and tested in a pilot study. The level of activity among primary school children was significantly influenced by perceived barriers, such as fear of strangers when playing outdoors, bad weather, and too much homework. However, activity was not influenced by cues to action or perceived benefits. Perceived benefits, barriers, and cues to physical activity did not differ by gender. A safe environment and fewer barriers, such as amount of homework, could enhance physical activity in primary school children.

  5. Drop size distribution measured by imaging: determination of the measurement volume by the calibration of the point spread function

    Fdida, Nicolas; Blaisot, Jean-Bernard

    2010-01-01

    Measurement of drop size distributions in a spray depends on the definition of the control volume for drop counting. For image-based techniques, this implies the definition of a depth-of-field (DOF) criterion. A sizing procedure based on an imaging model and associated with a calibration procedure is presented. Relations between image parameters and object properties are used to provide a measure of the size of the droplets, whatever the distance from the in-focus plane. A DOF criterion independent of the size of the drops and based on the determination of the width of the point spread function (PSF) is proposed. It allows to extend the measurement volume to defocused droplets and, due to the calibration of the PSF, to clearly define the depth of the measurement volume. Calibrated opaque discs, calibrated pinholes and an optical edge are used for this calibration. A comparison of the technique with a phase Doppler particle analyser and a laser diffraction granulometer is performed on an application to an industrial spray. Good agreement is found between the techniques when particular care is given to the sampling of droplets. The determination of the measurement volume is used to determine the drop concentration in the spray and the maximum drop concentration that imaging can support

  6. Microscopic determination of the PuO2 grain size and pore size distribution of MOX pellets with an image analysis system

    Vandezande, J.

    2000-01-01

    The industrial way to obtain the Pu distribution in a MOX pellet is by Image Analysis. The PuO 2 grains are made visible by alpha-autoradiography. Along with the Pu distribution the pore structure is an item which is examined, the latter is determined on the unetched sample. After the visualization of the sample structure, the sample is evaluated with an Image Analysis System. Each image is enhanced and a distinction is made between the objects to be measured and the matrix. The relevant parameters are then analyzed. When the overall particle distribution is wanted, all identified particles are measured and classified in size groups, based on a logarithmic scale. The possible conversion of two-dimensional diameters to three-dimensional diameters is accomplished by application of the Saltykov algorithm. When a single object is of interest, the object is selected interactively, and the result is reported to the user. (author)

  7. 13 CFR 121.404 - When does SBA determine the size status of a business concern?

    2010-01-01

    ... Competency (COC) relating to an unrestricted procurement is determined as of the date of the concern's... days prior to the end of the fifth year of the contract, and no more than 120 days prior to exercising...

  8. Simultaneous determination of size and refractive index of red blood cells by light scattering measurements

    Ghosh, N.; Buddhiwant, P.; Uppal, A.; Majumder, S.K.; Patel, H.S.; Gupta, P.K.

    2006-01-01

    We present a fast and accurate approach for simultaneous determination of both the mean diameter and refractive index of a collection of red blood cells (RBCs). The approach uses the peak frequency of the power spectrum and the corresponding phase angle obtained by performing Fourier transform on the measured angular distribution of scattered light to determine these parameters. Results on the measurement of two important clinical parameters, the mean cell volume and mean cell hemoglobin concentration of a collection of RBCs, are presented

  9. Determination of degradation rates of organic substances in the unsaturated soil zone depending on the grain size fractions of various soil types

    Fichtner, Thomas; Stefan, Catalin; Goersmeyer, Nora

    2015-04-01

    Rate and extent of the biological degradation of organic substances during transport through the unsaturated soil zone is decisively influenced by the chemical and physical properties of the pollutants such as water solubility, toxicity and molecular structure. Furthermore microbial degradation processes are also influenced by soil-specific properties. An important parameter is the soil grain size distribution on which the pore volume and the pore size depends. Changes lead to changes in air and water circulation as well as preferred flow paths. Transport capacity of water inclusive nutrients is lower in existing bad-drainable fine pores in soils with small grain size fractions than in well-drainable coarse pores in a soil with bigger grain size fractions. Because fine pores are saturated with water for a longer time than the coarse pores and oxygen diffusion in water is ten thousand times slower than in air, oxygen is replenished much slower in soils with small grain size fractions. As a result life and growth conditions of the microorganisms are negatively affected. This leads to less biological activity, restricted degradation/mineralization of pollutants or altered microbial processes. The aim of conducted laboratory column experiments was to study the correlation between the grain size fractions respectively pore sizes, the oxygen content and the biodegradation rate of infiltrated organic substances. Therefore two columns (active + sterile control) were filled with different grain size fractions (0,063-0,125 mm, 0,2-0,63 mm and 1-2 mm) of soils. The sterile soil was inoculated with a defined amount of a special bacteria culture (sphingobium yanoikuae). A solution with organic substances glucose, oxalic acid, sinaphylic alcohol and nutrients was infiltrated from the top in intervals. The degradation of organic substances was controlled by the measurement of dissolved organic carbon in the in- and outflow of the column. The control of different pore volumes

  10. Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

    Barnard, P.L.; Rubin, D.M.; Harney, J.; Mustain, N.

    2007-01-01

    This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than

  11. Motivation and Physical Activity Behaviors among Older Women: A Self-Determination Perspective

    Stephan, Yannick; Boiche, Julie; Le Scanff, Christine

    2010-01-01

    Drawing upon Self-Determination Theory, the purpose of our study was to examine the motivational determinants of older women's dropout and participation in physical activity (PA). Older women who dropped out (n = 242) or remained (n = 332) in an organized PA program completed the Sport Motivation Scale as well as health and PA measures. We found…

  12. Using BIB-SEM to determine pore morphology and pore size distributions in coal macerals

    Giffin, S.; Littke, R. [RWTH Aachen Univ. (Germany). Inst. of Geology and Geochemistry of Petroleum and Coal; Klaver, J.; Urai, J.L. [RWTH Aachen Univ. (Germany). Structural Geology, Tectonics and Geomechanics

    2013-08-01

    The composition of coalbeds is considerably heterogeneous, affecting the transport pathways for fluids within the coal. Transport pathways include cleats and larger pores. However, only a few clues exist as the nature of these pores. This study examines the morphology and distribution of macro- and mesopores in coal samples, using broad ion beam (BIB) milling to prepare relief- and damage-free polished surfaces of coal samples for high-resolution SEM imaging. Broad ion beam milling is advantageous to focused ion beam milling in that a larger surface area can be milled. Combining that with SEM imaging results in a useful tool to study pore morphology and distributions in the size range between 10 nm and 10 {mu}m. Since BIB-sections of a few square millimeters are not large enough to be statistically representative, results cannot be easily interpreted from a coal seam standpoint. Therefore, porosity was investigated as a function of maceral type to characterize pore morphologies. Macerals from the vitrinite and inertinite groups were selected with a known relationship to bedding. BIB-sections were milled parallel to bedding and perpendicular to bedding, and the pores were evaluated in each section. The goal of this study is to (1) qualitatively describe pore morphology with respect to maceral type and (2) quantitatively characterize pore size distributions with respect to maceral and in relationship to bedding. Our results lead to a better understanding of bulk coal porosity due to the visual, spatial representation and quantification of pores in individual macerals. (orig.)

  13. Right Size Determining the Staff Necessary to Sustain Simulation and Computing Capabilities for Nuclear Security

    Nikkel, Daniel J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meisner, Robert [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2010-09-10

    The Advanced Simulation and Computing Campaign, herein referred to as the ASC Program, is a core element of the science-based Stockpile Stewardship Program (SSP), which enables assessment, certification, and maintenance of the safety, security, and reliability of the U.S. nuclear stockpile without the need to resume nuclear testing. The use of advanced parallel computing has transitioned from proof-of-principle to become a critical element for assessing and certifying the stockpile. As the initiative phase of the ASC Program came to an end in the mid-2000s, the National Nuclear Security Administration redirected resources to other urgent priorities, and resulting staff reductions in ASC occurred without the benefit of analysis of the impact on modern stockpile stewardship that is dependent on these new simulation capabilities. Consequently, in mid-2008 the ASC Program management commissioned a study to estimate the essential size and balance needed to sustain advanced simulation as a core component of stockpile stewardship. The ASC Program requires a minimum base staff size of 930 (which includes the number of staff necessary to maintain critical technical disciplines as well as to execute required programmatic tasks) to sustain its essential ongoing role in stockpile stewardship.

  14. A Cluster Randomized Controlled Trial on the Effects of Technology-aided Testing and Feedback on Physical Activity and Biological Age Among Employees in a Medium-sized Enterprise.

    Liukkonen, Mika; Nygård, Clas-Håkan; Laukkanen, Raija

    2017-12-01

    It has been suggested that engaging technology can empower individuals to be more proactive about their health and reduce their health risks. The aim of the present intervention was to study the effects of technology-aided testing and feedback on physical activity and biological age of employees in a middle-sized enterprise. In all, 121 employees (mean age 42 ± 10 years) participated in the 12-month three-arm cluster randomized trial. The fitness measurement process (Body Age) determined the participants' biological age in years. Physical activity was measured with the International Physical Activity Questionnaire Short Form. Physical activity did not change during the intervention. Biological age (better fitness) improved in all groups statistically significantly ( p  physical activity but may enhance physical fitness measured by biological age.

  15. Maternal body size and condition determine calf growth rates in southern right whales

    Christiansen, Fredrik; Vivier, Fabien; Charlton, Claire

    2018-01-01

    The cost of reproduction is a key parameter determining a species' life history strategy. Despite exhibiting some of the fastest offspring growth rates among mammals, the cost of reproduction in baleen whales is largely unknown since standard field metabolic techniques cannot be applied. We...... quantified the cost of reproduction for southern right whales Eubalaena australis over a 3 mo breeding season. We did this by determining the relationship between calf growth rate and maternal rate of loss in energy reserves, using repeated measurements of body volume obtained from unmanned aerial vehicle...... period, and highlights the importance of sufficient maternal energy reserves for reproduction in this capital breeding species....

  16. AFM topographies of densely packed nanoparticles: a quick way to determine the lateral size distribution by autocorrelation function analysis

    Fekete, Ladislav; Kůsová, Kateřina; Petrák, Václav; Kratochvílová, Irena

    2012-01-01

    Roč. 14, č. 8 (2012), s. 1-10 ISSN 1388-0764 R&D Projects: GA AV ČR KAN200100801; GA TA ČR TA01011165; GA ČR(CZ) GAP304/10/1951; GA ČR GPP204/12/P235 Institutional research plan: CEZ:AV0Z10100520 Keywords : lateral grain size distribution * AFM * autocorrelation function * nanodiamond Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.175, year: 2012

  17. An analytical method to determine the optimal size of a photovoltaic plant

    Barra, L; Catalanotti, S; Fontana, F; Lavorante, F

    1984-01-01

    In this paper, a simplified method for the optimal sizing of a photovoltaic system is presented. The results have been obtained for Italian meteorological data, but the methodology can be applied to any geographical area. The system studied is composed of a photovoltaic array, power tracker, battery storage, inverter and load. Computer simulation was used to obtain the performance of this system for many values of field area, battery storage value, solar flux and load by keeping constant the efficiencies. A simple fit was used to achieve a formula relating the system variables to the performance. Finally, the formulae for the optimal values of the field area and the battery storage value are shown.

  18. Noctilucent cloud particle size determination based on multi-wavelength all-sky analysis

    Ugolnikov, Oleg S.; Galkin, Alexey A.; Pilgaev, Sergey V.; Roldugin, Alexey V.

    2017-10-01

    The article deals with the analysis of color distribution in noctilucent clouds (NLC) in the sky based on multi-wavelength (RGB) CCD-photometry provided with the all-sky camera in Lovozero in the north of Russia (68.0°N, 35.1°E) during the bright expanded NLC performance in the night of August 12, 2016. Small changes in the NLC color across the sky are interpreted as the atmospheric absorption and extinction effects combined with the difference in the Mie scattering functions of NLC particles for the three color channels of the camera. The method described in this paper is used to find the effective monodisperse radius of particles about 55 nm. The result of these simple and cost-effective measurements is in good agreement with previous estimations of comparable accuracy. Non-spherical particles, Gaussian and lognormal distribution of the particle size are also considered.

  19. Determination of an unrelated donor pool size for human leukocyte antigen-matched platelets in Brazil

    Carolina Bonet Bub

    2016-02-01

    Full Text Available ABSTRACT Background: Successful transfusion of platelet refractory patients is a challenge. Many potential donors are needed to sustain human leukocyte antigen matched-platelet transfusion programs because of the different types of antigens and the constant needs of these patients. For a highly mixed population such as the Brazilian population, the pool size required to provide adequate platelet support is unknown. Methods: A mathematical model was created to estimate the appropriate size of an unrelated donor pool to provide human leukocyte antigen-compatible platelet support for a Brazilian population. A group of 154 hematologic human leukocyte antigen-typed patients was used as the potential patient population and a database of 65,500 human leukocyte antigen-typed bone marrow registered donors was used as the donor population. Platelet compatibility was based on the grading system of Duquesnoy. Results: Using the mathematical model, a pool containing 31,940, 1710 and 321 donors would be necessary to match more than 80% of the patients with at least five completely compatible (no cross-reactive group, partial compatible (one cross-reactive group or less compatible (two cross-reactive group donors, respectively. Conclusion: The phenotypic diversity of the Brazilian population has probably made it more difficulty to find completely compatible donors. However, this heterogeneity seems to have facilitated finding donors when cross-reactive groups are accepted as proposed by the grading system of Duquesnoy. The results of this study may help to establish unrelated human leukocyte antigen-compatible platelet transfusions, a procedure not routinely performed in most Brazilian transfusion services.

  20. Experimental Determination of Bending Resonances of Millimeter Size PVF2 Cantilevers

    David F. Thompson

    2003-07-01

    Full Text Available The polymer piezoelectric polvinylidene fluoride has found widespread use in sensors and actuators. The bending mode of piezoelectricity offers very high sensitivities and low mechanical input impedance, but has not been studied in as much detail for sensor applications. We report the dynamic electromechanical properties of millimeter size cantilevers made from electroded films of PVF2. All devices tested had a single polymer layer. Several resonances are found below 1 kHz and the experimentally observed resonance frequency dependence on cantilever thickness and length are seen to agree well with published models which take the properties of the electrodes into account. It is found that bending resonances are also modulated by the width of the cantilever. Therefore, though the length and thickness control the resonance frequency most strongly, the actual realized value can be fine-tuned by changing cantilever width and the electrode material and its thickness. Further, all resonances display high piezoelectric coupling coefficients (keff, ranging between 0.2 - 0.35. The data presented here will be extremely useful in the design of sensors and actuators for a number of applications, since the combination of millimeter size scales and high piezoelectric sensitivities in the low audio range can be realized with this marriage of polymeric materials and cantilever geometries. Such an array of sensors can be used in cochlear implant applications, and when integrated with a resonance interrogation circuit can be used for the detection of low frequency vibrations of large structures. If appropriate mass/elasticity sensitive layers are coated on the electrodes, such a sensor can be used for the detection of a wide range of chemicals and biochemicals.

  1. Geographical Variations in the Environmental Determinants of Physical Inactivity among U.S. Adults.

    An, Ruopeng; Li, Xinye; Jiang, Ning

    2017-10-31

    Physical inactivity is a major modifiable risk factor for morbidity, disability and premature mortality worldwide. This study assessed the geographical variations in the impact of environmental quality on physical inactivity among U.S. adults. Data on county-level prevalence of leisure-time physical inactivity came from the Behavioral Risk Factor Surveillance System. County environment was measured by the Environmental Quality Index (EQI), a comprehensive index of environmental conditions that affect human health. The overall EQI consists of five subdomains-air, water, land, social, and built environment. Geographically weighted regressions (GWRs) were performed to estimate and map county-specific impact of overall EQI and its five subdomains on physical inactivity prevalence. The prevalence of leisure-time physical inactivity among U.S. counties was 25% in 2005. On average, one standard deviation decrease in the overall EQI was associated with an increase in county-level prevalence of leisure-time physical inactivity by nearly 1%. However, substantial geographical variations in the estimated environmental determinants of physical inactivity were present. The estimated changes of county-level prevalence of leisure-time physical inactivity resulted from one standard deviation decrease of the overall EQI ranged from an increase of over 3% to a decrease of nearly 2% across U.S. counties. Analogous, the estimated changes of county-level prevalence of leisure-time physical inactivity resulted from one standard deviation decrease of the EQI air, water, land, social, and built environment subdomains ranged from an increase of 2.6%, 1.5%, 2.9%, 3.3%, and 1.7% to a decrease of 2.9%, 1.4%, 2.4%, 2.4%, and 0.8% across U.S. counties, respectively. Given the substantial heterogeneities in the environmental determinants of physical inactivity, locally customized physical activity interventions are warranted to address the most concerning area-specific environmental issue.

  2. Molar mass determination of lignins by size-exclusion chromatography: towards standardisation of the method

    Baumberger, S.; Abaecherli, A.; Fasching, M.; Gellerstedt, G.; Gosselink, R.J.A.; Hortling, B.; Li, J.; Saake, B.; Jong, de E.

    2007-01-01

    The reactivity and physicochemical properties of lignins are partly governed by their molar mass distribution. The development of reliable standard methods for determination of the molar mass distribution is not only relevant for designing technical lignins for specific applications, but also for

  3. Analysis of work ability and work-related physical activity of employees in a medium-sized business.

    Wilke, Christiane; Ashton, Philip; Elis, Tobias; Biallas, Bianca; Froböse, Ingo

    2015-12-18

    Work-related physical activity (PA) and work ability are of growing importance in modern working society. There is evidence for age- and job-related differences regarding PA and work ability. This study analyses work ability and work-related PA of employees in a medium-sized business regarding age and occupation. The total sample consists of 148 employees (116 men-78.38% of the sample-and 32 women, accounting for 21.62%; mean age: 40.85 ± 10.07 years). 100 subjects (67.57%) are white-collar workers (WC), and 48 (32.43%) are blue-collar workers (BC). Work ability is measured using the work ability index, and physical activity is obtained via the Global Physical Activity Questionnaire. Work ability shows significant differences regarding occupation (p = 0.001) but not regarding age. Further, significant differences are found for work-related PA concerning occupation (p Work ability is rated as good, yet, a special focus should lie on the promotion during early and late working life. Also, there is still a lack of evidence on the level of work-related PA. Considering work-related PA could add to meeting current activity recommendations.

  4. Determination of a representative volume element based on the variability of mechanical properties with sample size in bread.

    Ramírez, Cristian; Young, Ashley; James, Bryony; Aguilera, José M

    2010-10-01

    Quantitative analysis of food structure is commonly obtained by image analysis of a small portion of the material that may not be the representative of the whole sample. In order to quantify structural parameters (air cells) of 2 types of bread (bread and bagel) the concept of representative volume element (RVE) was employed. The RVE for bread, bagel, and gelatin-gel (used as control) was obtained from the relationship between sample size and the coefficient of variation, calculated from the apparent Young's modulus measured on 25 replicates. The RVE was obtained when the coefficient of variation for different sample sizes converged to a constant value. In the 2 types of bread tested, the tendency of the coefficient of variation was to decrease as the sample size increased, while in the homogeneous gelatin-gel, it remained always constant around 2.3% to 2.4%. The RVE resulted to be cubes with sides of 45 mm for bread, 20 mm for bagels, and 10 mm for gelatin-gel (smallest sample tested). The quantitative image analysis as well as visual observation demonstrated that bread presented the largest dispersion of air-cell sizes. Moreover, both the ratio of maximum air-cell area/image area and maximum air-cell height/image height were greater for bread (values of 0.05 and 0.30, respectively) than for bagels (0.03 and 0.20, respectively). Therefore, the size and the size variation of air cells present in the structure determined the size of the RVE. It was concluded that RVE is highly dependent on the heterogeneity of the structure of the types of baked products.

  5. Synthesis, optical characterization, and size distribution determination by curve resolution methods of water-soluble CdSe quantum dots

    Santos, Calink Indiara do Livramento; Carvalho, Melissa Souza; Raphael, Ellen; Ferrari, Jefferson Luis; Schiavon, Marco Antonio, E-mail: schiavon@ufsj.edu.br [Universidade Federal de Sao Joao del-Rei (UFSJ), MG (Brazil). Grupo de Pesquisa em Quimica de Materiais; Dantas, Clecio [Universidade Estadual do Maranhao (LQCINMETRIA/UEMA), Caxias, MA (Brazil). Lab. de Quimica Computacional Inorganica e Quimiometria

    2016-11-15

    In this work a colloidal approach to synthesize water-soluble CdSe quantum dots (QDs) bearing a surface ligand, such as thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), glutathione (GSH), or thioglycerol (TGH) was applied. The synthesized material was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), UV-visible spectroscopy (UV-Vis), and fluorescence spectroscopy (PL). Additionally, a comparative study of the optical properties of different CdSe QDs was performed, demonstrating how the surface ligand affected crystal growth. The particles sizes were calculated from a polynomial function that correlates the particle size with the maximum fluorescence position. Curve resolution methods (EFA and MCR-ALS) were employed to decompose a series of fluorescence spectra to investigate the CdSe QDs size distribution and determine the number of fraction with different particle size. The results for the MPA-capped CdSe sample showed only two main fraction with different particle sizes with maximum emission at 642 and 686 nm. The calculated diameters from these maximum emission were, respectively, 2.74 and 3.05 nm. (author)

  6. Superresolution size determination in fluorescence microscopy: A comparison between spatially modulated illumination and confocal laser scanning microscopy

    Spoeri, Udo; Failla, Antonio Virgilio; Cremer, Christoph

    2004-01-01

    Recently developed far field light optical methods are a powerful tool to analyze biological nanostructures and their dynamics, in particular including the interior of three-dimensionally conserved cells. In this article, the recently described method of spatially modulated illumination (SMI) microscopy has been further extended to the online determination of the extension of small, subwavelength sized, fluorescent objects (nanosizing). Using fluorescence excitation with 488 nm, the determination of fluorescent labeled object diameters down to 40 nm corresponding to about 1/12th of the wavelength used for one-photon excitation could be shown. The results of the SMI nanosizing procedure for a detailed, systematic variation of the object diameter are presented together with a fast algorithm for online size evaluation. In addition, we show a direct comparison of the diameter of 'colocalization volumes' between SMI nanosizing and conventional confocal laser scanning microscopy

  7. Physical activity and determinants of sedentary behavior in Brazilian adolescents from an underdeveloped region.

    Guedes, Dartagnan P; Souza, Monica V; Ferreirinha, Jose E; Silva, Antonio Jose R M

    2012-04-01

    The purpose of the study was to analyze the physical activity and the determinants of sedentary behavior in 1,268 Brazilian adolescents (638 girls, 630 boys) between the ages of 15 and 18 years, randomly selected from a relatively underdeveloped region. Data were collected from a community-based survey in the city of João Pessoa, Paraiba, Brazil. Information related to physical activity was derived on the short version of the International Physical Activity Questionnaire. The prevalence of sedentary behavior was 28.2% for girls and 19.1% for boys, whilst 28.9% of the girls and 36.7% of the boys showed high physical activity. The sedentary behavior varied by sociodemographic and environmental determinants studied. Parents' education, socioeconomic status, school's characteristics, transport to school, paid work, smoking, alcohol use, and BMI scores were significantly related to sedentary behavior for boys and girls.

  8. Social Determinants of Physical Self-Rated Health among Asian Americans; Comparison of Six Ethnic Groups

    Shervin Assari

    2018-04-01

    Full Text Available Background: A growing literature has revealed ethnic group differences in determinants and meanings of their self-rated health (SRH. Aim: To explore ethnic variations in the effects of socioeconomic determinants on poor physical SRH of Asians in the United States. Methods: Data came from the National Asian American Survey (NAAS, 2008, with 4977 non-U.S. born Asian Americans, including Asian Indian (n = 1150, Chinese (n = 1350, Filipino (n = 603, Japanese (n = 541, Korean (n = 614, and Vietnamese (n = 719 Americans. Demographic factors (age and gender, socioeconomic status (SES; education, employment, income, and marital status, and physical SRH were measured. Ethnic-specific logistic regressions were applied for data analysis where physical SRH was the outcome and demographic and social determinants were predictors. Results: According to logistic regressions, no social determinant was consistently associated with physical SRH across all ethnic groups. Being married was associated with better physical SRH in Asian Indians and worse SRH in the Filipino group. Education was associated with better SRH in Asian Indian, Chinese, Korean, and Vietnamese Americans. High income was associated with better SRH in Chinese, Filipino, and Vietnamese Americans. Employment was associated with better SRH in Filipino Americans. Conclusion: Social determinants of physical SRH vary across ethnic groups of Asian Americans. Different ethnic groups are differently vulnerable to various social determinants of health. Application of single item SRH measures may be a source of bias in studies of health with ethnically diverse populations. Policy makers should be aware that the same change in social determinants may not result in similar change in the health of ethnic groups.

  9. System simulation application for determining the size of daily raw material purchases at PT XY

    Napitupulu, H. L.

    2018-02-01

    Every manufacturing company needs to implement green production, including PT XY as a marine catchment processing industry in Sumatera Utara Province. The company is engaged in the processing of squid for export purposes. The company’s problem relates to the absence of a decision on the daily purchase amount of the squid. The purchase of daily raw materials in varying quantities has caused companies to face the problem of excess raw materials or otherwise the lack of raw materials. The low purchase of raw materials will result in reduced productivity, while large purchases will lead to increased cooling costs for storage of excess raw materials, as well as possible loss of damage raw material. Therefore it is necessary to determine the optimal amount of raw material purchases every day. This can be determined by applying simulation. Application of system simulations can provide the expected optimal amount of raw material purchases.

  10. Size of lethality target in mouse immature oocytes determined with accelerated heavy ions.

    Straume, T; Dobson, R L; Kwan, T C

    1989-01-01

    Mouse immature oocytes were irradiated in vivo with highly charged, heavy ions from the Bevalac accelerator at the Lawrence Berkeley Laboratory. The particles used were 670-MeV/nucleon Si14+, 570-MeV/nucleon Ar18+, and 450-MeV/nucleon Fe26+. The cross-sectional area of the lethality target in these extremely radiosensitive cells was determined from fluence-response curves and information on energy deposition by delta rays. Results indicate a target cross-section larger than that of the nucleus, one which closely approximates the cross-sectional area of the entire oocyte. For 450-MeV/nucleon Fe26+ particles, the predicted target cross-sectional area is 120 +/- 16 microns2, comparing well with the microscopically determined cross-sectional area of 111 +/- 12 microns2 for these cells. The present results are in agreement with our previous target studies which implicate the oocyte plasma membrane.

  11. Dynamic determination of modulus of elasticity of full-size wood composite panels using a vibration method

    Cheng Guan; Houjiang Zhang; Lujing Zhou; Xiping Wang

    2015-01-01

    A vibration testing method based on free vibration theory in a ‘‘free–free” support condition was investigated for evaluating the modulus of elasticity (MOE) of full-size wood composite panels (WCPs). Vibration experiments were conducted on three types of WCPs (medium density fibreboard, particleboard, and plywood) to determine the dynamic MOE of the panels. Static...

  12. Self-determined Engagement in Physical Activity and Sedentary Behaviors of US College Students

    QUARTIROLI, ALESSANDRO; MAEDA, HOTAKA

    2014-01-01

    Although the importance of promoting physical activity is well established, researchers have recently considered ?sedentary behaviors? as another key risk factor for chronic disease. However, little is known about the motivational processes regulating sedentary behavior on a daily basis. A substantial amount of research has been based on the self-determination theory to examine the motivational processes regulating physical activity behaviors. However, only limited attention has been paid to ...

  13. Applications of flow cytometry in plant pathology for genome size determination, detection and physiological status.

    D'Hondt, Liesbet; Höfte, Monica; Van Bockstaele, Erik; Leus, Leen

    2011-10-01

    Flow cytometers are probably the most multipurpose laboratory devices available. They can analyse a vast and very diverse range of cell parameters. This technique has left its mark on cancer, human immunodeficiency virus and immunology research, and is indispensable in routine clinical diagnostics. Flow cytometry (FCM) is also a well-known tool for the detection and physiological status assessment of microorganisms in drinking water, marine environments, food and fermentation processes. However, flow cytometers are seldom used in plant pathology, despite FCM's major advantages as both a detection method and a research tool. Potential uses of FCM include the characterization of genome sizes of fungal and oomycete populations, multiplexed pathogen detection and the monitoring of the viability, culturability and gene expression of plant pathogens, and many others. This review provides an overview of the history, advantages and disadvantages of FCM, and focuses on the current applications and future possibilities of FCM in plant pathology. © 2011 THE AUTHORS. MOLECULAR PLANT PATHOLOGY © 2011 BSPP AND BLACKWELL PUBLISHING LTD.

  14. Regional Determinants of Efficiency Growth of Small and Medium-Sized Enterprises. Evidence from Poland

    Teresa Łuczka

    2012-01-01

    Full Text Available SMEs sector plays a vital role in modern economies. Therefore, the interest in its functioning among economists is in fact quite natural. This article is a part of a current research on regional factors contributing to the development of enterprises in this category. The first section examines earlier studies in this field conducted globally and in Poland. According to them, many elements enable the SME’s development. It is not surprisingly that the specified set of pro-growth factors does not exists. Next section describes the results of the author’s own studies in the fields. These studies relate to regional factors contributing to the efficiency growth of micro, small and medium-sized enterprises in Poland. Data used in the study was collected from GUS[1] and EUROSTAT and encompassed 16 provinces for the years 2003-2008. The model prepared included 11 independent variables on labor force, social mobility, living standard and R&D policy. The authors would have gladly considered more than 11 explanatory variable, but the inaccessibility of such data made it impossible. In the next step, using GRETL software, equations of regression were defined. On this basis it was concluded that the most important factors contributing to efficiency growth of SMEs are the amount of spending on R&D and the level of wages.

  15. Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

    Wang, Cheng; Chan, Qing N.; Zhang, Renlin; Kook, Sanghoon; Hawkes, Evatt R.; Yeoh, Guan H.; Medwell, Paul R.

    2016-01-01

    The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.

  16. Experimental determination of the energy difference between competing isomers of deposited, size-selected gold nanoclusters.

    Foster, D M; Ferrando, R; Palmer, R E

    2018-04-03

    The equilibrium structures and dynamics of a nanoscale system are regulated by a complex potential energy surface (PES). This is a key target of theoretical calculations but experimentally elusive. We report the measurement of a key PES parameter for a model nanosystem: size-selected Au nanoclusters, soft-landed on amorphous silicon nitride supports. We obtain the energy difference between the most abundant structural isomers of magic number Au 561 clusters, the decahedron and face-centred-cubic (fcc) structures, from the equilibrium proportions of the isomers. These are measured by atomic-resolution scanning transmission electron microscopy, with an ultra-stable heating stage, as a function of temperature (125-500 °C). At lower temperatures (20-125 °C) the behaviour is kinetic, exhibiting down conversion of metastable decahedra into fcc structures; the higher state is repopulated at higher temperatures in equilibrium. We find the decahedron is 0.040 ± 0.020 eV higher in energy than the fcc isomer, providing a benchmark for the theoretical treatment of nanoparticles.

  17. Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

    Wang, Cheng; Chan, Qing N., E-mail: qing.chan@unsw.edu.au; Zhang, Renlin; Kook, Sanghoon; Hawkes, Evatt R.; Yeoh, Guan H. [UNSW, School of Mechanical and Manufacturing Engineering (Australia); Medwell, Paul R. [The University of Adelaide, Centre for Energy Technology (Australia)

    2016-05-15

    The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.

  18. Particle contamination effects in EUVL: enhanced theory for the analytical determination of critical particle sizes

    Brandstetter, Gerd; Govindjee, Sanjay

    2012-03-01

    Existing analytical and numerical methodologies are discussed and then extended in order to calculate critical contamination-particle sizes, which will result in deleterious effects during EUVL E-chucking in the face of an error budget on the image-placement-error (IPE). The enhanced analytical models include a gap dependant clamping pressure formulation, the consideration of a general material law for realistic particle crushing and the influence of frictional contact. We present a discussion of the defects of the classical de-coupled modeling approach where particle crushing and mask/chuck indentation are separated from the global computation of mask bending. To repair this defect we present a new analytic approach based on an exact Hankel transform method which allows a fully coupled solution. This will capture the contribution of the mask indentation to the image-placement-error (estimated IPE increase of 20%). A fully coupled finite element model is used to validate the analytical models and to further investigate the impact of a mask back-side CrN-layer. The models are applied to existing experimental data with good agreement. For a standard material combination, a given IPE tolerance of 1 nm and a 15 kPa closing pressure, we derive bounds for single particles of cylindrical shape (radius × height < 44 μm) and spherical shape (diameter < 12 μm).

  19. Size Matters — Determinants of Modern, Community-Oriented Mental Health Services

    Ala-Nikkola, Taina; Pirkola, Sami; Kontio, Raija; Joffe, Grigori; Pankakoski, Maiju; Malin, Maili; Sadeniemi, Minna; Kaila, Minna; Wahlbeck, Kristian

    2014-01-01

    Governances, structures and contents of mental health services are being reformed across countries. There is a need for data to support those changes. The aim of this study was to explore the quality, i.e., diversity and community orientation, and quantity, i.e., personnel resources, of mental health and substance abuse services (MHS) and evaluate correlation between population needs and quality and quantity of MHS. The European Service Mapping Schedule—Revised (ESMS-R) was used to classify mental health and substance abuse services in southern Finland. Municipal-level aggregate data, local data on unemployment rate, length of education, age of retirement, proportion of single households, alcohol sales and a composite mental health index were used as indicators of population mental health needs. Population size correlated strongly with service diversity, explaining 84% of the variance. Personnel resources did not associate with diversity or community orientation. The indicators of mental health services need did not have the expected association with quality and quantity of services. In terms of service organization, the results may support larger population bases, at least 150,000 adult inhabitants, when aiming for higher diversity. PMID:25153471

  20. Factors Determining the Size of Sealing Clearance in Hydraulic Legs of Powered Supports

    Buyalich Gennady

    2017-01-01

    Full Text Available The factors that directly influence the formation of a sealing clearance between the piston and the working cylinder in hydraulic legs of powered supports are considered in this article, the size thereof has a direct effect on the tightness of the legs and, as a result, on the safety of work at the production face. A detailed description of these factors is given, which is supported by the dependencies obtained from the results of finite element modeling of various types of legs under various strength and geometric parameters, external load types and locations in the support section. The problems of formation of radial deformations of a working cylinder loaded with working fluid pressure are considered, and their dependence on the level of this pressure and extension. Based on the simulation results, the mechanisms for the formation of additional clearances due to rod and cylinder misalignments are described, and the conditions and causes of the resonant phenomena development are given. The classification of these factors according to the degree of generalization and the functional interaction between each other is proposed.

  1. Predicting physical activity and outcome expectations in cancer survivors: an application of Self-Determination Theory.

    Wilson, Philip M; Blanchard, Chris M; Nehl, Eric; Baker, Frank

    2006-07-01

    The purpose of this study was to examine the contributions of autonomous and controlled motives drawn from Self-Determination Theory (SDT; Intrinsic Motivation and Self-determination in Human Behavior. Plenum Press: New York, 1985; Handbook of Self-determination Research. University of Rochester Press: New York, 2002) towards predicting physical activity behaviours and outcome expectations in adult cancer survivors. Participants were cancer-survivors (N=220) and a non-cancer comparison cohort (N=220) who completed an adapted version of the Treatment Self-Regulation Questionnaire modified for physical activity behaviour (TSRQ-PA), an assessment of the number of minutes engaged in moderate-to-vigorous physical activity (MVPA) weekly, and the anticipated outcomes expected from regular physical activity (OE). Simultaneous multiple regression analyses indicated that autonomous motives was the dominant predictor of OEs across both cancer and non-cancer cohorts (R(2adj)=0.29-0.43), while MVPA was predicted by autonomous (beta's ranged from 0.21 to 0.34) and controlled (beta's ranged from -0.04 to -0.23) motives after controlling for demographic considerations. Cancer status (cancer versus no cancer) did not moderate the motivation-physical activity relationship. Collectively, these findings suggest that the distinction between autonomous and controlled motives is useful and compliments a growing body of evidence supporting SDT as a framework for understanding motivational processes in physical activity contexts with cancer survivors.

  2. Determinants of physical activity in primary school students using the health belief model

    Ar-yuwat S

    2013-03-01

    Full Text Available Sireewat Ar-yuwat,1,2 Mary Jo Clark,2 Anita Hunter,3 Kathy S James2 1Boromarajonani College of Nursing Nakhon Lampang (BCNLP, Lampang, Thailand; 2Hahn School of Nursing and Health Science, University of San Diego, San Diego, CA, 3Department of Nursing, Dominican University of California, San Rafael, CA, USA Background: Thailand is a middle-income country in which two-thirds of children demonstrate an insufficient level of physical activity. Physical inactivity is a major risk factor for obesity and many other health-related consequences in children. Thus, it is important to understand how primary school children perceive things in their daily life as determinants of physical activity. The purpose of this study was to investigate the impact of cues, perceived benefits, and perceived barriers on the level of physical activity among primary school students. Methods: A cross-sectional study was conducted in Phitsanulok Province, Thailand, in 2011. Multistage sampling selected a total of 123 primary school students. The Physical Activity Questionnaire for Older Children and the Cues, Perceived Benefits, and Barriers to Physical Activity Questionnaire were used to assess the student levels of physical activity, as well as the perceived benefits, barriers, and cues to action. The association between these factors and the level of physical activity was determined by correlation statistics and confirmed by robust regression. Multivariate analysis of variance compared health belief model determinants: perceived benefits, perceived barriers, and cues to action on physical activity between male and female students. Self-administered questionnaires were validated and tested in a pilot study. Results: The level of activity among primary school children was significantly influenced by perceived barriers, such as fear of strangers when playing outdoors, bad weather, and too much homework. However, activity was not influenced by cues to action or perceived

  3. Quantum size effects in Pb layers with absorbed Kondo adatoms: Determination of the exchange coupling constant

    Schwingenschlö gl, Udo; Shelykh, I. A.

    2009-01-01

    We consider the magnetic interaction of manganese phtalocyanine (MnPc) absorbed on Pb layers that were grown on a Si substrate. We perform an ab initio calculation of the density of states and Kondo temperature as a function of the number of Pb monolayers. Comparison to experimental data [Y.-S. Fu et al., Phys. Rev. Lett. 99, 256601 (2007)] then allows us to determine the exchange coupling constant J between the spins of the adsorbed molecules and those of the Pb host. This approach gives rise to a general and reliable method for obtaining J by combining experimental and numerical results.

  4. Quantum size effects in Pb layers with absorbed Kondo adatoms: Determination of the exchange coupling constant

    Schwingenschlögl, Udo

    2009-07-01

    We consider the magnetic interaction of manganese phtalocyanine (MnPc) absorbed on Pb layers that were grown on a Si substrate. We perform an ab initio calculation of the density of states and Kondo temperature as a function of the number of Pb monolayers. Comparison to experimental data [Y.-S. Fu et al., Phys. Rev. Lett. 99, 256601 (2007)] then allows us to determine the exchange coupling constant J between the spins of the adsorbed molecules and those of the Pb host. This approach gives rise to a general and reliable method for obtaining J by combining experimental and numerical results.

  5. Anthropometric Factors and Physical Condition Dominant Determinants Batting Skills in Softball

    Arif Eka Saraya

    2018-05-01

    Full Text Available batting skills in softball requires several anthropometric factors and physical condition to play to improve skills. Anthropometric factors and physical condition, among others, height, arm length, arm muscle strength, hand-eye coordination, balance, and reaction time. This study aims to determine the anthropometric factors and the physical condition of the dominant determinant of batting skills in softball. This research approach uses a quantitative to design of confirmatory factor analysis. This study population is training student achievement softball in sports education university of riau. A sample of 100 people was obtained through a simple random sampling technique. The data used are taken through a series of tests of the independent and dependent variables. This research method through testing confirmatory factor KMO and Bartlett’s Test analysis using SPSS. Results from this research is: factor of anthropometri dominant physical condition and determinants batting skill in game of softball is arm length with value 0,788, arm muscle power with value 0,851 and time reaction of with value 0,737. The conclusion of this research is: factor of anthropometri dominant physical condition and determinants batting skill in game of softball is arm length, arm muscle power and time reaction

  6. Determining the size of a complete disturbance landscape: multi-scale, continental analysis of forest change.

    Buma, Brian; Costanza, Jennifer K; Riitters, Kurt

    2017-11-21

    The scale of investigation for disturbance-influenced processes plays a critical role in theoretical assumptions about stability, variance, and equilibrium, as well as conservation reserve and long-term monitoring program design. Critical consideration of scale is required for robust planning designs, especially when anticipating future disturbances whose exact locations are unknown. This research quantified disturbance proportion and pattern (as contagion) at multiple scales across North America. This pattern of scale-associated variability can guide selection of study and management extents, for example, to minimize variance (measured as standard deviation) between any landscapes within an ecoregion. We identified the proportion and pattern of forest disturbance (30 m grain size) across multiple landscape extents up to 180 km 2 . We explored the variance in proportion of disturbed area and the pattern of that disturbance between landscapes (within an ecoregion) as a function of the landscape extent. In many ecoregions, variance between landscapes within an ecoregion was minimal at broad landscape extents (low standard deviation). Gap-dominated regions showed the least variance, while fire-dominated showed the largest. Intensively managed ecoregions displayed unique patterns. A majority of the ecoregions showed low variance between landscapes at some scale, indicating an appropriate extent for incorporating natural regimes and unknown future disturbances was identified. The quantification of the scales of disturbance at the ecoregion level provides guidance for individuals interested in anticipating future disturbances which will occur in unknown spatial locations. Information on the extents required to incorporate disturbance patterns into planning is crucial for that process.

  7. Determinants of spatial distribution in a bee community: nesting resources, flower resources, and body size.

    Torné-Noguera, Anna; Rodrigo, Anselm; Arnan, Xavier; Osorio, Sergio; Barril-Graells, Helena; da Rocha-Filho, Léo Correia; Bosch, Jordi

    2014-01-01

    Understanding biodiversity distribution is a primary goal of community ecology. At a landscape scale, bee communities are affected by habitat composition, anthropogenic land use, and fragmentation. However, little information is available on local-scale spatial distribution of bee communities within habitats that are uniform at the landscape scale. We studied a bee community along with floral and nesting resources over a 32 km2 area of uninterrupted Mediterranean scrubland. Our objectives were (i) to analyze floral and nesting resource composition at the habitat scale. We ask whether these resources follow a geographical pattern across the scrubland at bee-foraging relevant distances; (ii) to analyze the distribution of bee composition across the scrubland. Bees being highly mobile organisms, we ask whether bee composition shows a homogeneous distribution or else varies spatially. If so, we ask whether this variation is irregular or follows a geographical pattern and whether bees respond primarily to flower or to nesting resources; and (iii) to establish whether body size influences the response to local resource availability and ultimately spatial distribution. We obtained 6580 specimens belonging to 98 species. Despite bee mobility and the absence of environmental barriers, our bee community shows a clear geographical pattern. This pattern is mostly attributable to heterogeneous distribution of small (<55 mg) species (with presumed smaller foraging ranges), and is mostly explained by flower resources rather than nesting substrates. Even then, a large proportion (54.8%) of spatial variability remains unexplained by flower or nesting resources. We conclude that bee communities are strongly conditioned by local effects and may exhibit spatial heterogeneity patterns at a scale as low as 500-1000 m in patches of homogeneous habitat. These results have important implications for local pollination dynamics and spatial variation of plant-pollinator networks.

  8. Automated characterization of nerve fibers labeled fluorescently: determination of size, class and spatial distribution.

    Prodanov, Dimiter; Feirabend, Hans K P

    2008-10-03

    Morphological classification of nerve fibers could help interpret the assessment of neural regeneration and the understanding of selectivity of nerve stimulation. Specific populations of myelinated nerve fibers can be investigated by retrograde tracing from a muscle followed by microscopic measurements of the labeled fibers at different anatomical levels. Gastrocnemius muscles of adult rats were injected with the retrograde tracer Fluoro-Gold. After a survival period of 3 days, cross-sections of spinal cords, ventral roots, sciatic, and tibial nerves were collected and imaged on a fluorescence microscope. Nerve fibers were classified using a variation-based criterion acting on the distribution of their equivalent diameters. The same criterion was used to classify the labeled axons using the size of the fluorescent marker. Measurements of the axons were paired to those of the entire fibers (axons+myelin sheaths) in order to establish the correspondence between so-established axonal and fiber classifications. It was found that nerve fibers in L6 ventral roots could be classified into four populations comprising two classes of Aalpha (denoted Aalpha1 and Aalpha2), Agamma, and an additional class of Agammaalpha fibers. Cut-off borders between Agamma and Agammaalpha fiber classes were estimated to be 5.00+/-0.09 microm (SEM); between Agammaalpha and Aalpha1 fiber classes to be 6.86+/-0.11 microm (SEM); and between Aalpha1 and Aalpha2 fiber classes to be 8.66+/-0.16 microm (SEM). Topographical maps of the nerve fibers that innervate the gastrocnemius muscles were constructed per fiber class for the spinal root L6. The major advantage of the presented approach consists of the combined indirect classification of nerve fiber types and the construction of topographical maps of so-identified fiber classes.

  9. Determinants of spatial distribution in a bee community: nesting resources, flower resources, and body size.

    Anna Torné-Noguera

    Full Text Available Understanding biodiversity distribution is a primary goal of community ecology. At a landscape scale, bee communities are affected by habitat composition, anthropogenic land use, and fragmentation. However, little information is available on local-scale spatial distribution of bee communities within habitats that are uniform at the landscape scale. We studied a bee community along with floral and nesting resources over a 32 km2 area of uninterrupted Mediterranean scrubland. Our objectives were (i to analyze floral and nesting resource composition at the habitat scale. We ask whether these resources follow a geographical pattern across the scrubland at bee-foraging relevant distances; (ii to analyze the distribution of bee composition across the scrubland. Bees being highly mobile organisms, we ask whether bee composition shows a homogeneous distribution or else varies spatially. If so, we ask whether this variation is irregular or follows a geographical pattern and whether bees respond primarily to flower or to nesting resources; and (iii to establish whether body size influences the response to local resource availability and ultimately spatial distribution. We obtained 6580 specimens belonging to 98 species. Despite bee mobility and the absence of environmental barriers, our bee community shows a clear geographical pattern. This pattern is mostly attributable to heterogeneous distribution of small (<55 mg species (with presumed smaller foraging ranges, and is mostly explained by flower resources rather than nesting substrates. Even then, a large proportion (54.8% of spatial variability remains unexplained by flower or nesting resources. We conclude that bee communities are strongly conditioned by local effects and may exhibit spatial heterogeneity patterns at a scale as low as 500-1000 m in patches of homogeneous habitat. These results have important implications for local pollination dynamics and spatial variation of plant-pollinator networks.

  10. Determinants of Spatial Distribution in a Bee Community: Nesting Resources, Flower Resources, and Body Size

    Torné-Noguera, Anna; Rodrigo, Anselm; Arnan, Xavier; Osorio, Sergio; Barril-Graells, Helena; da Rocha-Filho, Léo Correia; Bosch, Jordi

    2014-01-01

    Understanding biodiversity distribution is a primary goal of community ecology. At a landscape scale, bee communities are affected by habitat composition, anthropogenic land use, and fragmentation. However, little information is available on local-scale spatial distribution of bee communities within habitats that are uniform at the landscape scale. We studied a bee community along with floral and nesting resources over a 32 km2 area of uninterrupted Mediterranean scrubland. Our objectives were (i) to analyze floral and nesting resource composition at the habitat scale. We ask whether these resources follow a geographical pattern across the scrubland at bee-foraging relevant distances; (ii) to analyze the distribution of bee composition across the scrubland. Bees being highly mobile organisms, we ask whether bee composition shows a homogeneous distribution or else varies spatially. If so, we ask whether this variation is irregular or follows a geographical pattern and whether bees respond primarily to flower or to nesting resources; and (iii) to establish whether body size influences the response to local resource availability and ultimately spatial distribution. We obtained 6580 specimens belonging to 98 species. Despite bee mobility and the absence of environmental barriers, our bee community shows a clear geographical pattern. This pattern is mostly attributable to heterogeneous distribution of small (nesting substrates. Even then, a large proportion (54.8%) of spatial variability remains unexplained by flower or nesting resources. We conclude that bee communities are strongly conditioned by local effects and may exhibit spatial heterogeneity patterns at a scale as low as 500–1000 m in patches of homogeneous habitat. These results have important implications for local pollination dynamics and spatial variation of plant-pollinator networks. PMID:24824445

  11. Determining the size and concentration dependence of gold nanoparticles in vitro cytotoxicity (IC50) test using WST-1 assay

    Rosli, Nur Shafawati binti; Rahman, Azhar Abdul; Aziz, Azlan Abdul; Shamsuddin, Shaharum

    2015-01-01

    Gold nanoparticles (AuNPs) received a great deal of attention for biomedical applications, especially in diagnostic imaging and therapeutics. Even though AuNPs have potential benefits in biomedical applications, the impact of AuNPs on human and environmental health still remains unclear. The use of AuNPs which is a high-atomic-number materials, provide advantages in terms of radiation dose enhancement. However, before this can become a clinical reality, cytotoxicity of the AuNPs has to be carefully evaluated. Cytotoxicity test is a rapid, standardized test that is very sensitive to determine whether the nanoparticles produced are harmful or benign on cellular components. In this work the size and concentration dependence of AuNPs cytotoxicity in breast cancer cell lines (MCF-7) are tested by using WST-1 assay. The sizes of AuNPs tested were 13 nm, 50 nm, and 70 nm. The cells were seeded in the 96-well plate and were treated with different concentrations of AuNPs by serial dilution for each size of AuNPs. The high concentration of AuNPs exhibit lower cell viability compared to low concentration of AuNPs. We quantified the toxicity of AuNPs in MCF-7 cell lines by determining the IC 50 values in WST-1 assays. The IC 50 values (inhibitory concentrations that effected 50% growth inhibition) of 50 nm AuNPs is lower than 13 nm and 70 nm AuNPs. Mean that, 50nm AuNPs are more toxic to the MCF-7 cells compared to smaller and larger sizes AuNPs. The presented results clearly indicate that the cytotoxicity of AuNPs depend not only on the concentration, but also the size of the nanoparticles

  12. Comparative physical-chemical characterization of encapsulated lipid-based isotretinoin products assessed by particle size distribution and thermal behavior analyses

    Guimaraes, Carla Aiolfi, E-mail: carlaaiolfi@usp.br [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Menaa, Farid [Department of Dermatology, School of Medicine Wuerzburg, Wuerzburg 97080 (Germany); Fluorotronics, Inc., 1425 Russ Bvld, San Diego Technology Incubator, San Diego, CA 92101 (United States); Menaa, Bouzid, E-mail: bouzid.menaa@gmail.com [Fluorotronics, Inc., 1425 Russ Bvld, San Diego Technology Incubator, San Diego, CA 92101 (United States); Quenca-Guillen, Joyce S. [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Matos, Jivaldo do Rosario [Department of Fundamental Chemistry, Institute of Chemistry, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Mercuri, Lucildes Pita [Department of Exact and Earth Sciences, Federal University of Sao Paulo, Diadema, SP 09972-270 (Brazil); Braz, Andre Borges [Department of Engineering of Mines and Oil, Polytechnical School, University of Sao Paulo, SP 05508-900 (Brazil); Rossetti, Fabia Cristina [Department of Pharmaceutical Sciences, Faculty of Pharmaceutical Sciences of Ribeirao Preto, University of Sao Paulo, Ribeirao Preto, SP 14015-120 (Brazil); Kedor-Hackmann, Erika Rosa Maria; Santoro, Maria Ines Rocha Miritello [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil)

    2010-06-10

    Isotretinoin is the drug of choice for the management of severe recalcitrant nodular acne. Nevertheless, some of its physical-chemical properties are still poorly known. Hence, the aim of our study consisted to comparatively evaluate the particle size distribution (PSD) and characterize the thermal behavior of the three encapsulated isotretinoin products in oil suspension (one reference and two generics) commercialized in Brazil. Here, we show that the PSD, estimated by laser diffraction and by polarized light microscopy, differed between the generics and the reference product. However, the thermal behavior of the three products, determined by thermogravimetry (TGA), differential thermal (DTA) analyses and differential scanning calorimetry (DSC), displayed no significant changes and were more thermostable than the isotretinoin standard used as internal control. Thus, our study suggests that PSD analyses in isotretinoin lipid-based formulations should be routinely performed in order to improve their quality and bioavailability.

  13. Exercising choice: the economic determinants of physical activity behaviour of an employed population.

    Brown, Heather; Roberts, Jennifer

    2011-08-01

    Lack of physical activity is a major contributing factor to the worldwide obesity epidemic, and to the overall burden of disease. The deindustrialisation of developed economies and move to more sedentary employment has impacted on the opportunities of working individuals to participate in physical activity. This can have negative effects on productivity and worker health potentially influencing economic growth. Thus, it is important to determine the factors influencing the frequency of participation in physical activity for employed individuals. This paper uses a modified time allocation framework to explore this issue. We use data from the first six waves of the Household Income and Labour Dynamics of Australia survey (HILDA). The analysis examines frequency of participation in physical activity using a generalised random effects ordered probit model. We control for non-parallel cut-points between the physical activity categories and individual heterogeneity, as well as exploring differences across gender. The results indicate that there is a time trade-off between non-market work, market work, and the frequency of physical activity participation. This effect is moderated by gender. For example, dependent children have a larger negative effect on the frequency of physical activity participation for women. Education and marriage have a larger negative effect on the frequency of participation for men. The findings suggests that policies which make exercise more convenient, and hence decrease the opportunity cost of exercise, will help to encourage more frequent participation in physical activity for working adults. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. Autonomy Mediates the Relationship between Personality and Physical Activity: An Application of Self-Determination Theory

    Meredith L. Ramsey

    2016-04-01

    Full Text Available This study sought to examine tenets of Self-Determination Theory by testing a mediation model of physical activity and personality via autonomy. A total of 290 adults were recruited to complete a one-time online survey of exercise habits and individual characteristics. Surveys assessed personality, autonomy, and physical activity. A measurement model specifying direct effects between personality dimensions and physical activity and indirect effects operating through autonomy provided an excellent fit to the data (Χ2 = 0.66, df = 3, p = 0.88, RMSEA(90% CI = 0.00 (0.00–0.05, CFI = 0.99, SRMR = 0.01. Results indicated significant (p < 0.05 effects of Extroversion (β = 0.42, Conscientiousness (β = 0.96, and Emotional Stability (β = 0.60 on autonomy, which in turn, was significantly associated with physical activity (β = 0.55. No significant effects were observed for Agreeableness or Intellect. None of the personality constructs were found to be directly associated with physical activity. This model accounted for 27% of the variance in physical activity. The results of this study suggest that autonomy is significantly associated with physical activity. Therefore, attempts to improve autonomy in individuals may be a useful intervention strategy in improving physical activity levels.

  15. Psychological determinants of physical activity across the life course: A "DEterminants of DIet and Physical ACtivity" (DEDIPAC umbrella systematic literature review.

    Cristina Cortis

    Full Text Available Low levels of physical activity (PA are reported to contribute to the occurrence of non-communicable diseases over the life course. Although psychological factors have been identified as an important category concerning PA behavior, knowledge on psychological determinants of PA is still inconclusive. Therefore, the aim of this umbrella systematic literature review (SLR was to summarize and synthesize the scientific evidence on psychological determinants of PA behavior across the life course. A systematic online search was conducted on MEDLINE, ISI Web of Science, Scopus, and SPORTDiscus databases. The search was limited to studies published in English from January 2004 to April 2016. SLRs and meta-analyses (MAs of observational studies investigating the association of psychological variables and PA were considered eligible. Extracted data were evaluated based on importance of determinants, strength of evidence, and methodological quality. The full protocol is available from PROSPERO (Record ID: CRD42015010616. Twenty reviews (14 SLRs and 6 MAs, mostly of moderate methodological quality, were found eligible. Convincing evidence was found for self-efficacy (positive association with PA in children and adolescents, and stress (negative association with PA regardless of age. Most of the evidence revealing an association between psychological determinants and PA is probable and limited, mainly due to differences in the definition of PA and of psychological determinants across reviews. Thus, scholars are urged to reach a consensus on clear definitions of relevant psychological determinants of PA, subsuming cultural biases and allowing the possibility to obtain clear interpretations and generalizability of findings. Finally, most psychological determinants should be considered within a larger framework of other multi-level determinants that may interact or mediate some of the effects.

  16. Reduction of physical activity in daily life and its determinants in smokers without airflow obstruction.

    Furlanetto, Karina Couto; Mantoani, Leandro Cruz; Bisca, Gianna; Morita, Andrea Akemi; Zabatiero, Juliana; Proença, Mahara; Kovelis, Demétria; Pitta, Fabio

    2014-04-01

    In smokers without airflow obstruction, detailed, objective and controlled quantification of the level of physical inactivity in daily life has never been performed. This study aimed to objectively assess the level of physical activity in daily life in adult smokers without airflow obstruction in comparison with matched non-smokers, and to investigate the determinants for daily physical activity in smokers. Sixty smokers (aged 50 (39-54) years) and 50 non-smokers (aged 48 (40-53) years) matched for gender, age, anthropometric characteristics, educational level, employment status and seasons of the year assessment period were cross-sectionally assessed regarding their daily physical activity with a step counter, besides assessment of lung function, functional exercise capacity, quality of life, anxiety, depression, self-reported comorbidities carbon monoxide level, nicotine dependence and smoking habits. When compared with non-smokers, smokers walked less in daily life (7923 ± 3558 vs 9553 ± 3637 steps/day, respectively), presented worse lung function, functional exercise capacity, quality of life, anxiety and depression. Multiple regression analyses identified functional exercise capacity, Borg fatigue, self-reported motivation/physical activity behaviour and cardiac disease as significant determinants of number of steps/day in smokers (partial r(2)  = 0.10, 0.12, 0.16 and 0.05; b = 15, -997, 1207 and -2330 steps/day, respectively; overall fit of the model R(2)  = 0.38; P smokers without airflow obstruction presented reduced level of daily physical activity. Functional exercise capacity, extended fatigue sensation, aspects of motivation/physical activity behaviour and self-reported cardiac disease are significant determinants of physical activity in daily life in smokers. © 2014 The Authors. Respirology © 2014 Asian Pacific Society of Respirology.

  17. The determinants of fuel use in the trucking industry – volume, size and the rebound effect

    Mulalic, Ismir

    2011-01-01

    We analyse the determinants of trucking firm fuel use. We develop a simple model to show that trucking firm fuel use depends, in addition to the fuel price and the traffic volume, also on the output of the trucking firm’s production process (the movement of cargo) measured in tonkilometres...... these elasticities using a simultaneous-equation model based on aggregate time-series data for Denmark for 1980-2007. Our best estimates of the short run and the long run rebound effects for road freight transportation are 19% and 28%, respectively. We also find that an increase in the fuel price surprisingly has...... a small but significant negative effect on the fuel efficiency (measured here as vehicle kilometres travelled (VKT) per litre of consumed fuel), i.e. a 1% increase in the fuel price decreases the fuel efficiency by 0.13% in the long run. However, less distance has to be driven for the same payload. An 1...

  18. Sex determination by tooth size in a sample of Greek population.

    Mitsea, A G; Moraitis, K; Leon, G; Nicopoulou-Karayianni, K; Spiliopoulou, C

    2014-08-01

    Sex assessment from tooth measurements can be of major importance for forensic and bioarchaeological investigations, especially when only teeth or jaws are available. The purpose of this study is to assess the reliability and applicability of establishing sex identity in a sample of Greek population using the discriminant function proposed by Rösing et al. (1995). The study comprised of 172 dental casts derived from two private orthodontic clinics in Athens. The individuals were randomly selected and all had clear medical history. The mesiodistal crown diameters of all the teeth were measured apart from those of the 3rd molars. The values quoted for the sample to which the discriminant function was first applied were similar to those obtained for the Greek sample. The results of the preliminary statistical analysis did not support the use of the specific discriminant function for a reliable determination of sex by means of the mesiodistal diameter of the teeth. However, there was considerable variation between different populations and this might explain the reason for lack of discriminating power of the specific function in the Greek population. In order to investigate whether a better discriminant function could be obtained using the Greek data, separate discriminant function analysis was performed on the same teeth and a different equation emerged without, however, any real improvement in the classification process, with an overall correct classification of 72%. The results showed that there were a considerably higher percentage of females correctly classified than males. The results lead to the conclusion that the use of the mesiodistal diameter of teeth is not as a reliable method as one would have expected for determining sex of human remains from a forensic context. Therefore, this method could be used only in combination with other identification approaches. Copyright © 2014. Published by Elsevier GmbH.

  19. Development and initial validation of the determinants of physical activity questionnaire.

    Taylor, Natalie; Lawton, Rebecca; Conner, Mark

    2013-06-11

    Physical activity interventions are more likely to be effective if they target causal determinants of behaviour change. Targeting requires accurate identification of specific theoretical determinants of physical activity. Two studies were undertaken to develop and validate the Determinants of Physical Activity Questionnaire. In Study 1, 832 male and female university staff and students were recruited from 49 universities across the UK and completed the 66-item measure, which is based on the Theoretical Domains Framework. Confirmatory factor analysis was undertaken on a calibration sample to generate the model, which resulted in a loss of 31 items. A validation sample was used to cross-validate the model. 20 new items were added and Study 2 tested the revised model in a sample of 466 male and female university students together with a physical activity measure. The final model consisted of 11 factors and 34 items, and CFA produced a reasonable fit χ2 (472) = 852.3, p < .001, CFI = .933, SRMR = .105, RMSEA = .042 (CI = .037-.046), as well as generally acceptable levels of discriminant validity, internal consistency, and test-retest reliability. Eight subscales significantly differentiated between high and low exercisers, indicating that those who exercise less report more barriers for physical activity. A theoretically underpinned measure of determinants of physical activity has been developed with reasonable reliability and validity. Further work is required to test the measure amongst a more representative sample. This study provides an innovative approach to identifying potential barriers to physical activity. This approach illustrates a method for moving from diagnosing implementation difficulties to designing and evaluating interventions.

  20. 3D printing for orthopedic applications: from high resolution cone beam CT images to life size physical models

    Jackson, Amiee; Ray, Lawrence A.; Dangi, Shusil; Ben-Zikri, Yehuda K.; Linte, Cristian A.

    2017-03-01

    With increasing resolution in image acquisition, the project explores capabilities of printing toward faithfully reflecting detail and features depicted in medical images. To improve safety and efficiency of orthopedic surgery and spatial conceptualization in training and education, this project focused on generating virtual models of orthopedic anatomy from clinical quality computed tomography (CT) image datasets and manufacturing life-size physical models of the anatomy using 3D printing tools. Beginning with raw micro CT data, several image segmentation techniques including thresholding, edge recognition, and region-growing algorithms available in packages such as ITK-SNAP, MITK, or Mimics, were utilized to separate bone from surrounding soft tissue. After converting the resulting data to a standard 3D printing format, stereolithography (STL), the STL file was edited using Meshlab, Netfabb, and Meshmixer. The editing process was necessary to ensure a fully connected surface (no loose elements), positive volume with manifold geometry (geometry possible in the 3D physical world), and a single, closed shell. The resulting surface was then imported into a "slicing" software to scale and orient for printing on a Flashforge Creator Pro. In printing, relationships between orientation, print bed volume, model quality, material use and cost, and print time were considered. We generated anatomical models of the hand, elbow, knee, ankle, and foot from both low-dose high-resolution cone-beam CT images acquired using the soon to be released scanner developed by Carestream, as well as scaled models of the skeletal anatomy of the arm and leg, together with life-size models of the hand and foot.

  1. Determining the most effective concentration of cypermethrin and the appropriate carrier particle size for fire ant (Hymenoptera: Formicidae) bait.

    Kafle, Lekhnath; Shih, Cheng-Jen

    2012-03-01

    The purpose of this study was to determine the most effective particle size of DDGS (distiller's dried grains with solubles) as fire ant bait carrier, as well as the most effective concentration of cypermethrin as a toxicant against the red imported fire ant (RIFA) Solenopsis invicta Buren under laboratory conditions. The DDGS particle size did not affect the fire ant's preference for the bait, but it did affect the mass of DDGS being carried back to the nest. The size of the DDGS particles and the mass of DDGS being carried back to the nest were positively correlated. The most efficient particle size of DDGS was 0.8-2 mm. The concentration of cypermethrin has a specific range for killing fire ants in an efficient manner. Neither a very low nor a very high concentration of cypermethrin was able to kill fire ants efficiently. The most effective concentration of cypermethrin was 0.13% in DDGS when mixed with 15% shrimp shell powders and 11% soybean oil. Based on its ability to kill fire ants when mixed with cypermethrin, as well as the advantage of having a larger area coverage when sprayed in the field, DDGS as the carrier and cypermethrin as the toxicant can be considered to be an efficient way to prepare fire ant bait for controlling fire ants in infested areas. Copyright © 2012 Society of Chemical Industry.

  2. PHYSICS

    D. Futyan

    A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.  Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish how ready we are to do physics with the early collisions at the LHC. The agenda of the week was thus pac...

  3. PHYSICS

    D. Futyan

    A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.   Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish (we hoped) the readiness of CMS to do physics with the early collisions at the LHC. The agenda of the...

  4. Experimental Investigations of the Physical and Optical Properties of Individual Micron/Submicron-Size Dust Grains in Astrophysical Environments

    Abbas, M. M.; Tankosic, D.; LeClair, A.

    2014-01-01

    Dust grains constitute a significant component of matter in the universe, and play an important and crucial role in the formation and evolution of the stellar/planetary systems in interstellar dust clouds. Knowledge of physical and optical properties of dust grains is required for understanding of a variety of processes in astrophysical and planetary environments. The currently available and generally employed data on the properties of dust grains is based on bulk materials, with analytical models employed to deduce the corresponding values for individual small micron/submicron-size dust grains. However, it has been well-recognized over a long period, that the properties of individual smallsize dust grains may be very different from those deduced from bulk materials. This has been validated by a series of experimental investigations carried out over the last few years, on a laboratory facility based on an Electrodynamic Balance at NASA, which permits levitation of single small-size dust grains of desired composition and size, in vacuum, in simulated space environments. In this paper, we present a brief review of the results of a series of selected investigations carried out on the analogs of interstellar and planetary dust grains, as well as dust grains obtained by Apollo-l1-17 lunar missions. The selected investigations, with analytical results and discussions, include: (a) Direct measurements of radiation on individual dust grains (b) Rotation and alignments of dust grains by radiative torque (c) Charging properties of dust grains by: (i) UV Photo-electric emissions (ii) Electron Impact. The results from these experiments are examined in the light of the current theories of the processes involved.

  5. Lifestyle factors and adolescent depressive symptomatology: Associations and effect sizes of diet, physical activity and sedentary behaviour.

    Hayward, Joshua; Jacka, Felice N; Skouteris, Helen; Millar, Lynne; Strugnell, Claudia; Swinburn, Boyd A; Allender, Steven

    2016-11-01

    Depression affects many Australian adolescents. Research points to the potential of lifestyle improvement for the population-level prevention of mental disorders. However, most studies examine single relationships without considering the combined contribution of lifestyle factors to variance in depression. This study examined associations between adolescent diet, physical activity and screen time behaviours and depressive symptomatology. A cross-sectional sample of year 8 and 10 students was recruited from 23 participating schools in 18 Victorian communities. Students were recruited using opt-out consent, resulting in 3295 participants from 4680 registered school enrolments (Participation Rate: 70.4%). Participants completed a supervised self-report questionnaire comprising Moods and Feelings Questionnaire-Short Form, an assessment of physical activity and sedentary behaviours during and outside school, and weekly food intake. Surveyed covariates included hours of sleep per night, age, socio-economic status and measured anthropometry. A hierarchical regression stratified by gender was conducted, with dichotomised Moods and Feelings Questionnaire-Short Form score as the outcome, and screen time, physical activity and dietary patterns as predictors. Nested regression analyses were then conducted to ascertain the variance in Moods and Feelings Questionnaire-Short Form score attributable to each significant predictor from the initial regression. Increased scores on an unhealthy dietary pattern (odds ratio = 1.18; 95% confidence interval = [1.07, 1.32]) and physical activity guideline attainment (0.91; [0.85, 0.97]) were associated with depressive symptomatology in males, while screen time guideline attainment (0.95; [0.91, 0.98]) was associated with depression in females. No association was observed between healthy diet pattern and Moods and Feelings Questionnaire-Short Form. Overall, effect sizes were generally small, and the regression model accounted for 5.22% of

  6. The minimum or natural rate of flow and droplet size ejected by Taylor cone–jets: physical symmetries and scaling laws

    Gañán-Calvo, A M; Rebollo-Muñoz, N; Montanero, J M

    2013-01-01

    We aim to establish the scaling laws for both the minimum rate of flow attainable in the steady cone–jet mode of electrospray, and the size of the resulting droplets in that limit. Use is made of a small body of literature on Taylor cone–jets reporting precise measurements of the transported electric current and droplet size as a function of the liquid properties and flow rate. The projection of the data onto an appropriate non-dimensional parameter space maps a region bounded by the minimum rate of flow attainable in the steady state. To explain these experimental results, we propose a theoretical model based on the generalized concept of physical symmetry, stemming from the system time invariance (steadiness). A group of symmetries rising at the cone-to-jet geometrical transition determines the scaling for the minimum flow rate and related variables. If the flow rate is decreased below that minimum value, those symmetries break down, which leads to dripping. We find that the system exhibits two instability mechanisms depending on the nature of the forces arising against the flow: one dominated by viscosity and the other by the liquid polarity. In the former case, full charge relaxation is guaranteed down to the minimum flow rate, while in the latter the instability condition becomes equivalent to the symmetry breakdown by charge relaxation or separation. When cone–jets are formed without artificially imposing a flow rate, a microjet is issued quasi-steadily. The flow rate naturally ejected this way coincides with the minimum flow rate studied here. This natural flow rate determines the minimum droplet size that can be steadily produced by any electrohydrodynamic means for a given set of liquid properties. (paper)

  7. The minimum or natural rate of flow and droplet size ejected by Taylor cone-jets: physical symmetries and scaling laws

    Gañán-Calvo, A. M.; Rebollo-Muñoz, N.; Montanero, J. M.

    2013-03-01

    We aim to establish the scaling laws for both the minimum rate of flow attainable in the steady cone-jet mode of electrospray, and the size of the resulting droplets in that limit. Use is made of a small body of literature on Taylor cone-jets reporting precise measurements of the transported electric current and droplet size as a function of the liquid properties and flow rate. The projection of the data onto an appropriate non-dimensional parameter space maps a region bounded by the minimum rate of flow attainable in the steady state. To explain these experimental results, we propose a theoretical model based on the generalized concept of physical symmetry, stemming from the system time invariance (steadiness). A group of symmetries rising at the cone-to-jet geometrical transition determines the scaling for the minimum flow rate and related variables. If the flow rate is decreased below that minimum value, those symmetries break down, which leads to dripping. We find that the system exhibits two instability mechanisms depending on the nature of the forces arising against the flow: one dominated by viscosity and the other by the liquid polarity. In the former case, full charge relaxation is guaranteed down to the minimum flow rate, while in the latter the instability condition becomes equivalent to the symmetry breakdown by charge relaxation or separation. When cone-jets are formed without artificially imposing a flow rate, a microjet is issued quasi-steadily. The flow rate naturally ejected this way coincides with the minimum flow rate studied here. This natural flow rate determines the minimum droplet size that can be steadily produced by any electrohydrodynamic means for a given set of liquid properties.

  8. Experimental determination of the unattached radon daughter fraction and dust size distribution in some Canadian uranium mines

    Bigu, J.; Kirk, J.

    1982-01-01

    The unattached radon daughter fraction has been experimentally determined in some Canadian uranium mines. Two experimental methods have been used, the wire screen method and a diffusion sampler based on Mercer's theory of diffusional deposition on parallel circular plates. Experiments were conducted in 'non-diesel' and 'diesel' areas of the mines, i.e. locations where mining was done with diesel machinery. Unattached fractions ranged from about 2-8 per cent for non-diesel area. For diesel areas the unattached fraction was substantially lower, less than about one per cent. The aerosol concentration in the range 0.0015 - 0.13 μm was measured with a condensation nuclei counter. Dust concentration was determined with conventional samplers. Particle size distribution in the respirable range was determined with a fine particle spectrometer in conjunction with eriometric techniques

  9. PORE SIZE DISTRIBUTION AND SOIL HYDRO PHYSICAL PROPERTIES UNDER DIFFERENT TILLAGE PRACTICES AND COVER CROPS IN A TYPIC HAPLUSULT IN NORTHERN NIGERIA

    Halima Mohammed Lawal

    2017-05-01

    Full Text Available Tillage practices influence soil physical, chemical and biological qualities which in-turn alters plant growth and crop yield. In the Northern Guinea Savanna (NGS ecological zone of Nigeria, agricultural production is mainly constrained by low soil nutrient and water holding capacity, it is therefore, imperative to develop appropriate management practices that will give optimal soil hydro-physical properties for proper plant growth, effective soil and water management and environmental conservation. This study investigated the effect of three tillage practices (no till, reduced till and conventional till and four cover crops (Centrosema pascuorum, Macrotyloma uniflorum, Cucurbita maxima and Glyine max and a bare/control (no cover crop on some soil physical properties of a Typic Haplusult during the rainy seasons of 2011, 2012 and 2013 in Samaru, NGS ecological zone of Nigeria. The field trials were laid out in a split plot arrangement with tillage practices in the main plots and cover crops in the subplots, all treatments were replicated three times. Auger and core soil samples were collected at the end of each cropping season each year in three replicates from each treatment plot at four depths (0-5, 5-10, 10-15 and 15-20 cm. Particle size distribution, bulk density, total pore volume and water retention at various soil matric potentials were determined using standard methods. Data obtained were compared with optimum values and fitted into a RETC computer code for quantifying soil hydraulic behavior and physical quality. Results showed that different tillage practices had varied effect on soil physical properties. No-till had the highest water holding capacity at most suction points evaluated, it had 4.3 % and 12.9 % more soil moisture than the reduced till  and conventionally tilled systems across all matric potentials while Centrosema pascuorum (3.1% and Cucurbita maxima (5.5% were best among evaluated cover crops in retaining soil moisture

  10. Determination of particle size and content of metals in the atmosphere of ZMCM (Metropolitan Zone of Mexico City)

    Aldape U, F.; Flores M, J.; Diaz, R.V.; Garcia G, R.

    1994-01-01

    Inside the breathable fraction of the atmosphere of Mexico City, the presence of metals in suspended particles, is determined and quantified. The detection was carry out simultaneously in three places of the city, using collectors of the type stacking filter unit (SFU) which allow the separation of particles according to its size. The SFU detectors allow the separation in two size: 'Gross' mass from 2.5 to 1.5 μm and 'fine' mass for particles smallest than 2.5 μm. The analysis of the samples was fulfilled by means of PIXE method. Samples were irradiated with a proton beam, and based in the X-ray spectra the elements were identified and quantified, which allow to establish the temporal behavior of the concentrations per element for gross mass and fine mass in each one of the places of sampling. (Author)

  11. Methodological aspects of values for determining the physical load in sport.

    Chernozub A.A.

    2012-09-01

    Full Text Available The main aspects of the control system of training in sport and identified two methodological concepts determine the amount of physical activity during the training sessions. It is established that the physical training and sports activities in the course of employment estimate the value of physical activity mainly due to the reaction rates of the functional systems of the body to an external stimulus. Such an assessment, especially in a narrow range of controllable parameters (for the reaction of the cardiovascular and respiratory systems, is more theoretical in nature and does not allow to clearly define the critical load levels for a particular organism. This problem highlights the need to use a single, integrated, suitable for precise mathematical analysis of the universal, possibly conditional, indicator or criteria for evaluating physical activity. Development of this criterion will optimize the training process at different stages of training opportunities tailored to individual athletes.

  12. Perceived teaching behaviors and self-determined motivation in physical education: a test of self-determination theory.

    Koka, Andre; Hagger, Martin S

    2010-03-01

    In the present study, we tested the effects of specific dimensions of perceived teaching behaviors on students' self-determined motivation in physical education. In accordance with the tenets of self-determination theory (Deci & Ryan, 1985, 2000), we expected the psychological needs for competence, autonomy, and relatedness would mediate these effects. Secondary school students (N=498) ages 12-17 years completed measures of perceived teaching behaviors for seven dimensions: (a) democratic behavior, (b) autocratic behavior (c) teaching and instruction, (d) situation consideration, (e) positive general feedback, (f) positive nonverbal feedback, and (h) negative nonverbal feedback. They also completed measures of perceived satisfaction for competence, autonomy, relatedness, and self-determined motivation. A path-analytic model revealed a positive, indirect effect of perceived positive general feedback on self-determined motivation. The effects of perceived autocratic behavior and negative nonverbal feedback were direct and negative, whereas the effects of teaching and instruction and situation consideration were direct and positive. Results suggest that feedback, situation consideration, and teaching and instruction are essential antecedents to self-determined motivation.

  13. Social Physique Anxiety and Intention to Be Physically Active: A Self-Determination Theory Approach

    Sicilia, Álvaro; Sáenz-Alvarez, Piedad; González-Cutre, David; Ferriz, Roberto

    2016-01-01

    Purpose: Based on self-determination theory, the purpose of this study was to analyze the relationship between social physique anxiety and intention to be physically active, while taking into account the mediating effects of the basic psychological needs and behavioral regulations in exercise. Method: Having obtained parents' prior consent, 390…

  14. Physical Fitness Qualities of Professional Rugby League Football Players: Determination of Positional Differences.

    Meir, Rudi; Newton, Robert; Curtis, Edgar; Fardell, Matthew; Butler, Benjamin

    2001-01-01

    Australian and English professional rugby players completed various physical fitness performance tests to determine differences when grouping players into three different rugby positional categories. Results found minimal differences in test scores on the basis of players' specific positions on a team, however, when players were grouped according…

  15. Promoting Enjoyment in Girls' Physical Education: The Impact of Goals, Beliefs, and Self-Determination

    Wang, C. K. John; Liu, W. C.

    2007-01-01

    This study examined the network of relationships between sport ability beliefs, achievement goals, self-determination and female students' enjoyment in school physical education (PE). Female secondary students (n = 343) from a single-sex secondary school in Singapore participated in the survey. They were assessed on sport ability beliefs, goal…

  16. A Test of Self-Determination Theory in School Physical Education

    Standage, Martyn; Duda, Joan L.; Ntoumanis, Nikos

    2005-01-01

    Background: Contemporary research conducted in the context of school physical education (PE) has increasingly embraced various tenets of self-determination theory (Deci & Ryan, 1985, 1991). Despite this increase in research attention, some postulates of the framework remain unexplored (e.g. impact of a need-supportive climate). As such, the…

  17. Determinants of diet and physical activity (DEDIPAC): a summary of findings.

    Brug, Johannes; van der Ploeg, Hidde P; Loyen, Anne; Ahrens, Wolfgang; Allais, Oliver; Andersen, Lene F; Cardon, Greet; Capranica, Laura; Chastin, Sebastien; De Bourdeaudhuij, Ilse; De Craemer, Marieke; Donnelly, Alan; Ekelund, Ulf; Finglas, Paul; Flechtner-Mors, Marion; Hebestreit, Antje; Kubiak, Thomas; Lanza, Massimo; Lien, Nanna; MacDonncha, Ciaran; Mazzocchi, Mario; Monsivais, Pablo; Murphy, Marie; Nicolaou, Mary; Nöthlings, Ute; O'Gorman, Donal J; Renner, Britta; Roos, Gun; van den Berg, Matthijs; Schulze, Matthias B; Steinacker, Jürgen M; Stronks, Karien; Volkert, Dorothee; Lakerveld, Jeroen

    2017-11-03

    The establishment of the Determinants of Diet and Physical Activity (DEDIPAC) Knowledge Hub, 2013-2016, was the first action taken by the 'Healthy Diet for a Healthy Life' European Joint Programming Initiative. DEDIPAC aimed to provide better insight into the determinants of diet, physical activity and sedentary behaviour across the life course, i.e. insight into the causes of the causes of important, non-communicable diseases across Europe and beyond. DEDIPAC was launched in late 2013, and delivered its final report in late 2016. In this paper we give an overview of what was achieved in terms of furthering measurement and monitoring, providing overviews of the state-of-the-art in the field, and building toolboxes for further research and practice. Additionally, we propose some of the next steps that are now required to move forward in this field, arguing in favour of 1) sustaining the Knowledge Hub and developing it into a European virtual research institute and knowledge centre for determinants of behavioural nutrition and physical activity with close links to other parts of the world; 2) establishing a cohort study of families across all regions of Europe focusing specifically on the individual and contextual determinants of major, non-communicable disease; and 3) furthering DEDIPAC's work on nutrition, physical activity, and sedentary behaviour policy evaluation and benchmarking across Europe by aligning with other international initiatives and by supporting harmonisation of pan-European surveillance.

  18. Experiments Using Cell Phones in Physics Classroom Education: The Computer-Aided "g" Determination

    Vogt, Patrik; Kuhn, Jochen; Muller, Sebastian

    2011-01-01

    This paper continues the collection of experiments that describe the use of cell phones as experimental tools in physics classroom education. We describe a computer-aided determination of the free-fall acceleration "g" using the acoustical Doppler effect. The Doppler shift is a function of the speed of the source. Since a free-falling objects…

  19. Performance grading and motivational functioning and fear in physical education: A self-determination theory perspective

    Krijgsman, C.A.; Vansteenkiste, Maarten; van Tartwijk, J.W.F.; Maes, Jolien; Borghouts, Lars; Cardon, Greet; Mainhard, M.T.; Haerens, Leen

    2017-01-01

    Grounded in self-determination theory, the present study examines the explanatory role of students' perceived need satisfaction and need frustration in the relationship between performance grading (versus non-grading) and students' motivation and fear in a real-life educational physical education

  20. An Examination of Sixth Graders' Self-Determined Motivation and Learning in Physical Education

    Sun, Haichun; Chen, Ang

    2010-01-01

    Self-determination theory (SDT), when applied in education, emphasizes helping learners internalize extrinsic motivation so as to regulate their learning behavior from an amotivation state to intrinsic motivation. The purpose of this study was to examine the relationship between SDT components and learning in middle school physical education.…

  1. Fitting Multidimensional Amotivation into the Self-Determination Theory Nomological Network: Application in School Physical Education

    Vlachopoulos, Symeon P.; Katartzi, Ermioni S.; Kontou, Maria G.

    2013-01-01

    The present study investigated the nomological validity of the Amotivation Inventory-Physical Education (Shen, Wingert, Li, Sun, & Rukavina, 2010b) scores by examining the associations of ability, effort, value, and task characteristics amotivation beliefs with self-determination theory variables. Data were collected from 401 fifth- and…

  2. 28 CFR 104.46 - Determination of presumed noneconomic losses for claimants who suffered physical harm.

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Determination of presumed noneconomic losses for claimants who suffered physical harm. 104.46 Section 104.46 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) SEPTEMBER 11TH VICTIM COMPENSATION FUND OF 2001 Amount of Compensation for...

  3. Physical Principles of the Method for Determination of Geometrical Characteristics and Particle Recognition in Digital Holography

    Dyomin, V. V.; Polovtsev, I. G.; Davydova, A. Yu.

    2018-03-01

    The physical principles of a method for determination of geometrical characteristics of particles and particle recognition based on the concepts of digital holography, followed by processing of the particle images reconstructed from the digital hologram, using the morphological parameter are reported. An example of application of this method for fast plankton particle recognition is given.

  4. Determining the Variability of Lesion Size Measurements from CT Patient Data Sets Acquired under “No Change” Conditions

    Michael F. McNitt-Gray

    2015-02-01

    Full Text Available PURPOSE: To determine the variability of lesion size measurements in computed tomography data sets of patients imaged under a “no change” (“coffee break” condition and to determine the impact of two reading paradigms on measurement variability. METHOD AND MATERIALS: Using data sets from 32 non-small cell lung cancer patients scanned twice within 15 minutes (“no change”, measurements were performed by five radiologists in two phases: (1 independent reading of each computed tomography dataset (timepoint: (2 a locked, sequential reading of datasets. Readers performed measurements using several sizing methods, including one-dimensional (1D longest in-slice dimension and 3D semi-automated segmented volume. Change in size was estimated by comparing measurements performed on both timepoints for the same lesion, for each reader and each measurement method. For each reading paradigm, results were pooled across lesions, across readers, and across both readers and lesions, for each measurement method. RESULTS: The mean percent difference (±SD when pooled across both readers and lesions for 1D and 3D measurements extracted from contours was 2.8 ± 22.2% and 23.4 ± 105.0%, respectively, for the independent reads. For the locked, sequential reads, the mean percent differences (±SD reduced to 2.52 ± 14.2% and 7.4 ± 44.2% for the 1D and 3D measurements, respectively. CONCLUSION: Even under a “no change” condition between scans, there is variation in lesion size measurements due to repeat scans and variations in reader, lesion, and measurement method. This variation is reduced when using a locked, sequential reading paradigm compared to an independent reading paradigm.

  5. Determination of the columnar aerosol size distribution by inversion of spectral aerosol optical depth measurements at different areas in Egypt

    EI-Metwally, M.; Madkour, M.A.

    2006-01-01

    Aerosols have a great effects on nuclear safety calculations and atmospheric environment. The aerosol optical depth measurements are carried out at four areas in Egypt: Cairo and Helwan as urban/industrial areas, Aswan as an arid area and Mansoura as an agricultural area covering the period from Jun 1992 to May 1993. These measurements were recorded by ground-based pyrheliometers with large band-pass filters. Monthly average values of aerosol optical depth (AOD) showed a pronounced temporal trend, with a maximum AOD during summer and the transition seasons (spring and autumn) at all sites. Levels of AODs are higher at both urban and industrial areas than at other areas. Variation of Angstrom exponent a with the AOD was clear at most sites and the a value depends on the spectral range used in its determination. The mean contribution of anthropogenic sources to AOD over Cairo was at the range of 25.1-54.3%, whereas those values in Helwan were at the range of 34.5-59.8%. Finally, columnar aerosol size distributions have been inferred by inverting particularly AOD measurements as a function of wavelength. The Junge (type I) and bimodal (type III) distributions are dominant at urban and arid areas (Cairo and Aswan), whereas mono dispersion distribution (type II) are dominant in industrial and agricultural areas (Helwan and Mansoura). In Cairo and Aswan, the peak of columnar size distribution for the fine mode at radius r is around 0.1 and 0.2 μm respectively, while it is around 1.0 and 2.0 μm for the coarse mode. .Also, the peak of size distribution for the mono dispersion mode was marked at radius around 0.2 μm at both Helwan and Mansoura. A comprehensive comparison of our results with literature size distributions is very sparse, nevertheless, our size distributions in general agree with them

  6. A method to determine size-specific natural mortality applied to westcoast steenbras ( Lithognathus aureti ) in Namibia

    Beyer, Jan; Kirchner, C.H.; Holtzhausen, J.A.

    1999-01-01

    in stocks that are close to a virgin state. Size-specific natural mortality rates of westcoast steenbras (Lithognathus aureti) were determined by using length frequencies of rod-caught fish from a lightly exploited and closed population at Meob Bay, Namibia. It was assumed that natural mortality...... with a constant coefficient of variation in length at age. The simple method works within 10% precision criteria in most real cases. It is shown that overestimating mean length at old ((L) over bar(infinity)) counteracts the effects of overlapping lengths for consecutive age groups. This fact can be used...

  7. The effect of different physical activity levels on muscle fiber size and type distribution of lumbar multifidus. A biopsy study on low back pain patient groups and healthy control subjects.

    Mazis, N; Papachristou, D J; Zouboulis, P; Tyllianakis, M; Scopa, C D; Megas, P

    2009-12-01

    Previous studies examining the multifidus fiber characteristics among low back pain (LBP) patients have not considered the variable of physical activity. The present study sought to investigate the muscle fiber size and type distribution of the lumbar multifidus muscle among LBP patient groups with different physical activity levels and healthy controls. Sixty-four patients were assigned to one of three groups named according to the physical activity level, determined for each patient by the International Physical Activity Questionnaire. These were low (LPA), medium (MPA) and high (HPA) physical activity groups. A control group comprising of 17 healthy individuals was also recruited. Muscle biopsy samples were obtained from the multifidus muscle at the level L4-L5. contrast with the control group, LBP patient groups showed a significantly higher Type II fiber distribution as well as reduced diameter in both fiber types (P0.05) among LPA, MPA and HPA patient groups. Various pathological conditions were detected which were more pronounced in LBP groups compared to the control (P<0.05). Males had a larger fiber diameter compared to females for both fiber types (P<0.05). The results showed that the level of physical activity did not affect muscle fiber size and type distribution among LBP patients groups. These findings suggest that not only inactivity but also high physical activity levels can have an adverse effect on the multifidus muscle fiber characteristics.

  8. Determinants of dietary behavior and physical activity among Canadian Inuit: a systematic review.

    Akande, Victor O; Hendriks, Anna M; Ruiter, Robert A C; Kremers, Stef P J

    2015-06-24

    Increased dependence on Western diets and low physical activity have largely contributed to weight gain and associated chronic diseases in the Canadian Inuit population. The purpose of this study was to systematically review factors influencing dietary and physical activity behaviors to guide health promotion interventions and provide recommendations for future studies. We conducted a systematic literature review to identify relevant articles. Searches were conducted between May 2014 and July 2014, and inclusive of articles published up until July 2014. Articles were searched using four databases: PubMed, PsycINFO, SocINDEX, and Psychology and Behavioral Sciences Collection. Eligible studies focused on diet and/or physical activity or determinants of diet and/or physical activity in Canadian Inuit population, and were published in English. A total of 45 articles were included in the analysis. A detailed appraisal of the articles suggested that many Inuit have disconnected from the traditional ways of life, including harvesting and processing of traditional food species and the associated physical activity. In the last two decades there has been a significant shift from consumption of healthy traditional foods to energy-dense store-bought foods particularly among younger Inuit (Inuit. However, our understanding is limited on how these behaviours might be influenced in the face of these changes. Prospective studies are needed to advance our knowledge of cognitive and environmental determinants of Inuit energy balance-related behaviours. These studies can inform the development of health promotion interventions in the population.

  9. A Model of Contextual Motivation in Physical Education: Using Constructs from Self-Determination and Achievement Goal Theories To Predict Physical Activity Intentions.

    Standage, Martyn; Duda, Joan L.; Ntoumanis, Nikos

    2003-01-01

    Examines a study of student motivation in physical education that incorporated constructs from achievement goal and self-determination theories. Self-determined motivation was found to positively predict, whereas amotivation was a negative predictor of leisure-time physical activity intentions. (Contains 86 references and 3 tables.) (GCP)

  10. Objectively determined habitual physical activity in South African adolescents: the PAHL study

    2014-01-01

    Background There is limited data on objectively determined habitual physical activity (PA) in 16-year old South African adolescents. The purpose of this study was to objectively determine the habitual PA of adolescents from the North West Province of South Africa by race and gender. Methods Adolescents (137 girls, 89 boys) from the ongoing Physical Activity and Health Longitudinal Study (PAHL study), participated in the present study. Habitual PA was objectively recorded by means of the Actiheart® over a period of 7 days. Time spent in moderate-to-vigorous intensity physical activity (MVPA) was assessed. Results Average MVPA for the study sample was 50.9 ± 40.3 minutes/day. Girls were significantly more active than boys expending more time in MVPA (61.13 ± 52.2 minutes/day; p Physical activity varies by both gender and race in adolescents from the North West Province of South Africa. Objectively determined data from our study indicates that girls habitually spend more time in MVPA per day than boys, and that white adolescents habitually engage in more MVPA than black adolescents. Seeing as the average MVPA per day for the entire study sample falls below the recommended daily average of 60minutes/day, adolescents should be the foremost targets of interventions aimed at enhancing habitual PA. PMID:24885503

  11. Physical capital and the embodied nature of income inequality: gender differences in the effect of body size on workers' incomes in Canada.

    Perks, Thomas

    2012-02-01

    This study assesses the effects of body size--measured using the body mass index--on the income attainment of female and male workers in Canada. Using data from a national representative sample of Canadians, multivariate analyses show that, for female workers, the body size-income relationship is negative. However, for male workers, the body size-income relationship is positive and nonlinear. Using Bourdieu's conceptualization of physical capital, and Shilling's extension of it, it is argued that these results are suggestive of the relative importance of body size to the production and continuation of gender income inequality in Canada.

  12. Determination of Particle Size and Distribution through Image-Based Macroscopic Analysis of the Structure of Biomass Briquettes

    Veronika Chaloupková

    2018-02-01

    Full Text Available Via image-based macroscopic, analysis of a briquettes’ surface structure, particle size, and distribution was determined to better understand the behavioural pattern of input material during agglomeration in the pressing chamber of a briquetting machine. The briquettes, made of miscanthus, industrial hemp and pine sawdust were produced by a hydraulic piston press. Their structure was visualized by a stereomicroscope equipped with a digital camera and software for image analysis and data measurements. In total, 90 images of surface structure were obtained and quantitatively analysed. Using Nikon Instruments Software (NIS-Elements software, the length and area of 900 particles were measured and statistically tested to compare the size of the particles at different surface locations. Results showed statistically significant differences in particles’ size distribution: larger particles were generally on the front side of briquettes and vice versa, smaller particles were on the rear side. As well, larger particles were centred in the middle of cross sections and the smaller particles were centred on the bottom of the briquette.

  13. A behavioral Bayes method to determine the sample size of a clinical trial considering efficacy and safety.

    Kikuchi, Takashi; Gittins, John

    2009-08-15

    It is necessary for the calculation of sample size to achieve the best balance between the cost of a clinical trial and the possible benefits from a new treatment. Gittins and Pezeshk developed an innovative (behavioral Bayes) approach, which assumes that the number of users is an increasing function of the difference in performance between the new treatment and the standard treatment. The better a new treatment, the more the number of patients who want to switch to it. The optimal sample size is calculated in this framework. This BeBay approach takes account of three decision-makers, a pharmaceutical company, the health authority and medical advisers. Kikuchi, Pezeshk and Gittins generalized this approach by introducing a logistic benefit function, and by extending to the more usual unpaired case, and with unknown variance. The expected net benefit in this model is based on the efficacy of the new drug but does not take account of the incidence of adverse reactions. The present paper extends the model to include the costs of treating adverse reactions and focuses on societal cost-effectiveness as the criterion for determining sample size. The main application is likely to be to phase III clinical trials, for which the primary outcome is to compare the costs and benefits of a new drug with a standard drug in relation to national health-care. Copyright 2009 John Wiley & Sons, Ltd.

  14. Steps toward validity in active living research: research design that limits accusations of physical determinism.

    Riggs, William

    2014-03-01

    "Active living research" has been accused of being overly "physically deterministic" and this article argues that urban planners must continue to evolve research and address biases in this area. The article first provides background on how researchers have dealt with the relationship between the built environment and health over years. This leads to a presentation of how active living research might be described as overly deterministic. The article then offers lessons for researchers planning to embark in active-living studies as to how they might increase validity and minimize criticism of physical determinism. © 2013 Published by Elsevier Ltd.

  15. Heart Rate-Determined Physical Activity In New Zealand School Children: A Cross- Sectional Study

    Michael J. Hamlin; Mick Grimley; Vicki Cowley; Chris D. Price; Jill M. Hargreaves; Jenny J. Ross

    2011-01-01

    The aim of this study was to examine current levels of physical activity determined via heart rate monitoring. A total of 176 children (85 boys, 91 girls) aged 5-13 years wore sealed Polar heart rate monitors for at least 10 hours per day on at least 3 days. Mean daily minutes of moderate to vigorous-intensity physical activity was 65 ± 43 (mean ± SD) for boys and 54 ± 37 for girls. Daily minutes of vigorous-intensity activity was 31 ± 24 and 24 ± 21 for boys and girls respectively. Significa...

  16. Determination of physical health status and healthy lifestyle behaviors of individuals with mental illness.

    Erginer, Derya Kayar; Günüşen, Neslihan Partlak

    2018-02-23

    The aim of this study is to determine the physical health status and healthy lifestyle behaviors of individuals with mental illness. A descriptive research design was used. The sample of the study consisted of 115 individuals with mental illness. The Health Lifestyle Behaviors Scale II was used to assess the healthy lifestyle behaviors of the participants. Of the individuals, 49.6% were found to have metabolic syndrome. Individuals with mental illness obtained the lowest score from the physical activity dimension of the scale. Individuals with mental illness need to receive education and support, especially in terms of nutrition and exercise. © 2018 Wiley Periodicals, Inc.

  17. Determinants of meeting the public health recommendations for physical activity among community-dwelling elderly Japanese.

    Oka, Koichiro; Shibata, Ai

    2012-02-01

    Although regular physical activity can facilitate healthy aging, improve functional capacity, and prevent chronic diseases in the elderly, many of the Japanese elderly are not sufficiently active. Thus, examining the determinants is an important prerequisite for designing effective programs. The present study investigated the demographic, behavioral, psychosocial, and environmental determinants of meeting the national pedometer-determined physical activity recommendations for the elderly Japanese. Data were analyzed for 137 community-dwelling elderly Japanese aged 70 to 89 years (47% male, mean age = 74.5 years), who completed a questionnaire and wore a pedometer. Demographic (gender, age, marital status), behavioral (BMI, smoking, alcohol consumption), psychosocial (self-efficacy, social support, health professional advice), and environmental (perceived neighborhood environment) variables were self-reported. Averaged daily steps were obtained using 1-year pedometer measurements. Based on the national physical activity recommendations in Japan (males: 6700 steps; females: 5900 steps), the participants were divided into two categories - sufficiently active and insufficiently active. An adjusted logistic regression model was utilized. Totally, 47.4% of the participants (males: 51.5%; females: 43.8%) met the national recommendations. When adjusting for all other variables, a higher self-efficacy for exercise (AOR = 1.16; 95% CI: 1.04-1.28) and positive perception of the neighborhood environment (AOR = 1.43; 95% CI: 1.03-1.98) significantly influenced the meeting of the national recommendations. The findings clarified the need to identify effective intervention strategies to promote physical activity and suggest that an intervention design that accounts for these determinants may more effectively promote physical activity among the elderly Japanese.

  18. Determination of the growth restriction factor and grain size for aluminum alloys by a quasi-binary equivalent method

    Mitrašinović, A.M.; Robles Hernández, F.C.

    2012-01-01

    Highlights: ► A new method to determine the growth restricting factor. (Q) is proposed ► The proposed method is highly accurate (R 2 = 0.99) and simple. ► A major novelty of this method is the determination of Q for non-dilute samples. ► The method proposed herein is based on quasi-binary phase diagrams and composition. ► This method can be easily implemented industrially or as a research tool. - Abstract: In the present research paper is suggested a new methodology to determine the growth restricting factor (Q) and grain size (GS) for various Al-alloys. The present method combines a thermodynamical component based on the liquidus behavior of each alloying element that is later incorporated into the well known growth restricting models for multi-component alloys. This approach that can be used to determine Q and/or GS based on the chemical composition and the slope of the liquidus temperature of any Al-alloy solidified in close to equilibrium conditions. This method can be modified further in order to assess the effect of cooling rate or thermomechanical processing on growth restricting factor and grain size. In the present paper is proposed a highly accurate (R 2 = 0.99) and validated model for Al–Si alloys, but it can be modified for any other Al–X alloying system. The present method can be used for alloys with relatively high solute content and due to the use of the thermodynamics of liquidus this system considers the poisoning effects of single and multi-component alloying elements.

  19. Sample-size dependence of diversity indices and the determination of sufficient sample size in a high-diversity deep-sea environment

    Soetaert, K.; Heip, C.H.R.

    1990-01-01

    Diversity indices, although designed for comparative purposes, often cannot be used as such, due to their sample-size dependence. It is argued here that this dependence is more pronounced in high diversity than in low diversity assemblages and that indices more sensitive to rarer species require larger sample sizes to estimate diversity with reasonable precision than indices which put more weight on commoner species. This was tested for Hill's diversity number N sub(0) to N sub( proportional ...

  20. Checking the determinants of physical activity based on the theory of planned behavior in the housewives

    Saber, Fatemeh; Shanazi, Hossein; Sharifirad, Gholamreza; Hasanzadeh, Akbar

    2014-01-01

    Background: Sedentary life has been recognized as a serious problem in today's Iranian society. Promoting the lifestyle with increased physical activity and prevention of cardiovascular disease (CVD) is imperative. The purpose of this study was identifying the determinants of physical activity in the housewives of Nain city in 2012 based on the theory of planned behavior. Materials and Methods: In this cross-sectional study, 120 housewives were selected by simple random sampling method. Data collection tool was a questionnaire designed based on a standardized and fabricated questionnaire and consisted of four parts. The questionnaire included awareness variables, theory of structures, planned behavior, and physical activity. Data analysis was performed using the SPSS software version 18 and associated statistical tests. Findings: The 120 housewives under study had a mean age of 34.58 ± 6.86 years. The mean scores of awareness, attitude, motivation to perform, subjective norms, and perceived behavioral control variables were 74.1 ± 18.5, 82.6 ± 12.1, 59.4 ± 21.7, 63.2 ± 21.2, and 48.1 ± 12.9 respectively. There was a significant relationship between the motivation for physical activity among women and knowledge (P = 0.02) attitude (P = 0.04) subjective norms (P = 0.002) perceived behavioral control (P = 0.001), and physical activity (P = 0.04). Conclusions: It seems that the housewives, despite being aware of and having a positive attitude on the benefits of physical activity, had a poor lifestyle. Perhaps further studies can help in finding the causes of this issue and the barriers to physical activity such as the conditions and plan for greater measures for improving physical activity, in order to promote women's health which has a significant role in family and community health. PMID:25250360

  1. Understanding Physical Activity Motivation and Behaviour Through Self-Determination and Servant Leadership Theories in a Feasibility Study.

    Gray, Samantha M; Wharf Higgins, Joan; Rhodes, Ryan E

    2017-09-27

    Despite its well-established benefits, physical activity (PA) engagement is low in the adult population; evidence suggests that this is especially a concern for women > 60 years. The purpose of this mixed methods study was to explore the feasibility of a six-week randomized control trial of Self-Determination Theory-based dance and walking programs for older women. Primary outcomes were feasibility measures: recruitment, retention, and satisfaction. Secondary outcomes included self-reported PA, behavioural regulations, and psychological needs. Thirty-five women completed the study (M = 62.8 ± 4.8 years), representing 39% recruitment and 95% retention rate. Both programs were highly attended. Exploratory effect sizes for secondary measures were promising. Emergent themes highlighted the importance of servant leadership concepts in the group setting for motivating PA. Our findings provide support for expanding this trial to a full-scale study.

  2. Determinants of Physical Activity in Patients with Chronic Obstructive Pulmonary Disease: A 5-Year Prospective Follow-Up Study

    Yu, Tsung; Frei, Anja; ter Riet, Gerben; Puhan, Milo A.

    2016-01-01

    Although many studies examined determinants of physical activity in patients with chronic obstructive pulmonary disease (COPD), most were cross-sectional and focused on single determinants only. The aim of this study was to determine how COPD patients' physical activity changes over time and to

  3. Polyhydroxy surfactants for the formulation of lipid nanoparticles (SLN and NLC): effects on size, physical stability and particle matrix structure.

    Kovacevic, A; Savic, S; Vuleta, G; Müller, R H; Keck, C M

    2011-03-15

    The two polyhydroxy surfactants polyglycerol 6-distearate (Plurol(®)Stearique WL1009 - (PS)) and caprylyl/capryl glucoside (Plantacare(®) 810 - (PL)) are a class of PEG-free stabilizers, made from renewable resources. They were investigated for stabilization of aqueous solid lipid nanoparticle (SLN) and nanostructured lipid carrier (NLC) dispersions. Production was performed by high pressure homogenization, analysis by photon correlation spectroscopy (PCS), laser diffraction (LD), zeta potential measurements and differential scanning calorimetry (DSC). Particles were made from Cutina CP as solid lipid only (SLN) and its blends with Miglyol 812 (NLC, the blends containing increasing amounts of oil from 20% to 60%). The obtained particle sizes were identical for both surfactants, about 200 nm with polydispersity indices below 0.20 (PCS), and unimodal size distribution (LD). All dispersions with both surfactants were physically stable for 3 months at room temperature, but Plantacare (PL) showing a superior stability. The melting behaviour and crystallinity of bulk lipids/lipid blends were compared to the nanoparticles. Both were lower for the nanoparticles. The crystallinity of dispersions stabilized with PS was higher, the zeta potential decreased with storage time associated with this higher crystallinity, and leading to a few, but negligible larger particles. The lower crystallinity particles stabilized with PL remained unchanged in zeta potential (about -50 mV) and in size. These data show that surfactants have a distinct influence on the particle matrix structure (and related stability and drug loading), to which too little attention was given by now. Despite being from the same surfactant class, the differences on the structure are pronounced. They are attributed to the hydrophobic-lipophilic tail structure with one-point anchoring in the interface (PL), and the loop conformation of PS with two hydrophobic anchor points, i.e. their molecular structure and its

  4. Physical activity adoption to adherence, lapse, and dropout: a self-determination theory perspective.

    Kinnafick, Florence-Emilie; Thøgersen-Ntoumani, Cecilie; Duda, Joan L

    2014-05-01

    Grounded in Self-Determination Theory, we aimed to explore and identify key motivational processes involved in the transition from a physically inactive to an active lifestyle, and the processes involved in lapse and dropout behavior within a walking program. We implemented a qualitative, longitudinal case study method, using semistructured interviews and theoretical thematic analyses. Fifteen women were interviewed over 10 months and three profiles were generated: (a) nonadherence, (b) lapse/readoption of physical activity, and (c) adherence. Internalization of walking behavior was key to adherence. Satisfaction of the needs for competence and relatedness were central for participation during exercise at the adoption stages, and autonomy was particularly pertinent in facilitating adherence. Those who lapsed and restarted physical activity experienced feelings of autonomy at the point of readoption. Sources of support were driving forces in the adoption and adherence phases.

  5. Influence of size of the ionization chamber in determination of the quality of an X-ray field of references

    Viana, R.N.; Cassiano, D.H.; Peixoto, J.G.P.

    2005-01-01

    The quality of an X-ray field of reference can be evaluated with the determination of the values of the first and second half-value layer - 1 st and 2 nd CSR, from measurements carried out with appropriate ionisation chambers. The acceptance criteria of ISO 4037-1 states that the values of 1 st and 2 nd CSR may not differ by more than -5% of the reference values. Procedures have been developed on X-ray equipment PANTAK, model HF160, adjusted to produce a field of 48 keV X-ray, to investigate the determination of the values of 1 st and 2 nd CSR with the use of different ionization chambers of varying volumes. The initial results indicate that the values of 1 st and 2 nd CSR are influenced by the size of the ionization chamber used, which suggests the determination of algorithm for the determination of a single value of 1 st and 2 nd CSR

  6. Gradient Enhanced Physically Based Plasticity: Implementation and Application to a Problem Pertaining Size Effect : Implementation and application to a problem pertaining size effect

    Perdahcioglu, Emin Semih; Soyarslan, C.; van den Boogaard, Antonius H.; Bargmann, S.

    2016-01-01

    A physically based plasticity model is implemented which describes work hardening of a material as a function of the total dislocation density. The local part of the model, which involves statistically stored dislocations (SSDs) only, is based on Bergström's original model. The nonlocal part is

  7. A semi-physical simulation platform of attitude determination and control system for satellite

    Yuanjin Yu

    2016-05-01

    Full Text Available A semi-physical simulation platform for attitude determination and control system is proposed to verify the attitude estimator and controller on ground. A simulation target, a host PC, many attitude sensors, and actuators compose the simulation platform. The simulation target is composed of a central processing unit board with VxWorks operating system and many input/output boards connected via Compact Peripheral Component Interconnect bus. The executable programs in target are automatically generated from the simulation models in Simulink based on Real-Time Workshop of MATLAB. A three-axes gyroscope, a three-axes magnetometer, a sun sensor, a star tracer, three flywheels, and a Global Positioning System receiver are connected to the simulation target, which formulates the attitude control cycle of a satellite. The simulation models of the attitude determination and control system are described in detail. Finally, the semi-physical simulation platform is used to demonstrate the availability and rationality of the control scheme of a micro-satellite. Comparing the results between the numerical simulation in Simulink and the semi-physical simulation, the semi-physical simulation platform is available and the control scheme successfully achieves three-axes stabilization.

  8. Self-Determination and Physical Exercise Adherence in the Contexts of Fitness Academies and Personal Training

    Klain, Ingi Petitemberte; de Matos, Dihogo Gama; Leitão, José Carlos; Cid, Luís; Moutão, João

    2015-01-01

    This research aimed to analyze the validity of the relations hypothesized by the theory of self-determination in predicting adherence to physical exercise in fitness academy users and subjects following personal training. A total of 588 persons from Pelotas / RS / Brazil (405 gym users and 183 subjects following personal training) completed the Portuguese version of the three questionnaires, i.e. the Perceived Autonomy Support Climate Exercise Questionnaire, Basic Psychological Needs in the Exercise Scale and Behavioral Regulation in the Exercise Questionnaire −2. The results support the factorial structure of the questionnaires used in this sample. There was a significant multivariate effect of context on self-determination for physical exercise training [Wilks’ λ = 0.934, F (10, 576.000) = 4.03, p amotivation and external regulation were significantly higher in the context of fitness academies. PMID:26240667

  9. Comparison of Hounsfield units by changing in size of physical area and setting size of region of interest by using the CT phantom made with a 3D printer

    Seung, Youl Hun

    2015-01-01

    In this study, we have observed the change of the Hounsfield (HU) in the alteration of by changing in size of physical area and setting size of region of interest (ROI) at focus on kVp and mAs. Four-channel multi-detector computed tomography was used to get transverse axial scanning images and HU. Three dimensional printer which is type of fused deposition modeling (FDM) was used to produce the Phantom. The structure of the phantom was designed to be a type of cylinder that contains 33 mm, 24 mm, 19 mm, 16 mm, 9 mm size of circle holes that are symmetrically located. It was charged with mixing iodine contrast agent and distilled water in the holes. The images were gained with changing by 90 kVp, 120 kVp, 140 kVp and 50 mAs, 100 mAs, 150 mAs, respectively. The ‘image J’ was used to get the HU measurement of gained images of ROI. As a result, it was confirmed that kVp affects to HU more than mAs. And it is suggested that the smaller size of physical area, the more decreasing HU even in material of a uniform density and the smaller setting size of ROI, the more increasing HU. Therefore, it is reason that to set maximum ROI within 5 HU is the best way to minimize in the alteration of by changing in size of physical area and setting size of region of interest

  10. Comparison of Hounsfield units by changing in size of physical area and setting size of region of interest by using the CT phantom made with a 3D printer

    Seung, Youl Hun [Dept. of Radiological Science, Cheongju University, Cheongju (Korea, Republic of)

    2015-12-15

    In this study, we have observed the change of the Hounsfield (HU) in the alteration of by changing in size of physical area and setting size of region of interest (ROI) at focus on kVp and mAs. Four-channel multi-detector computed tomography was used to get transverse axial scanning images and HU. Three dimensional printer which is type of fused deposition modeling (FDM) was used to produce the Phantom. The structure of the phantom was designed to be a type of cylinder that contains 33 mm, 24 mm, 19 mm, 16 mm, 9 mm size of circle holes that are symmetrically located. It was charged with mixing iodine contrast agent and distilled water in the holes. The images were gained with changing by 90 kVp, 120 kVp, 140 kVp and 50 mAs, 100 mAs, 150 mAs, respectively. The ‘image J’ was used to get the HU measurement of gained images of ROI. As a result, it was confirmed that kVp affects to HU more than mAs. And it is suggested that the smaller size of physical area, the more decreasing HU even in material of a uniform density and the smaller setting size of ROI, the more increasing HU. Therefore, it is reason that to set maximum ROI within 5 HU is the best way to minimize in the alteration of by changing in size of physical area and setting size of region of interest.

  11. Promoting physical activity: development and testing of self-determination theory-based interventions

    2012-01-01

    A growing number of studies have pulled from Deci and Ryan's Self-Determination Theory to design interventions targeting health behavior change. More recently, researchers have begun using SDT to promote the adoption and maintenance of an active lifestyle. In this review, we aim to highlight how researchers and practitioners can draw from the SDT framework to develop, implement, and evaluate intervention efforts centered on increasing physical activity levels in different contexts and different populations. In the present paper, the rationale for using SDT to foster physical activity engagement is briefly reviewed before particular attention is given to three recent randomized controlled trials, the Canadian Physical Activity Counseling (PAC) Trial, the Empower trial from the UK, and the Portuguese PESO (Promotion of Health and Exercise in Obesity) trial, each of which focused on promoting physical activity behavior. The SDT-based intervention components, procedures, and participants are highlighted, and the key findings that have emanated from these three trials are presented. Lastly, we outline some of the limitations of the work conducted to date in this area and we acknowledge the challenges that arise when attempting to design, deliver, and test SDT-grounded interventions in the context of physical activity promotion. PMID:22385751

  12. Determining Purpose of Academic Discipline “Physical Education” for Future Teachers

    Ж. О. Цимбалюк

    2016-09-01

    Full Text Available The research objective is to determine the purpose of physical education in pedagogical higher educational institutions. Materials and methods. The research used: theoretical analysis and collation of scientific literature; study of guidelines and documents regulating the process of organizing and conducting the discipline “Physical Education” in a higher educational institution; questionnaires. The participants of the experiment were 60 first-year students (enrolled in 2015-2016 of the School of Ukrainian Language and Literature of H. S. Skovoroda Kharkiv National Pedagogical University. Research results. The analysis of the questionnaires revealed low rates of motivational variants in the choice of the sports section related to the future profession. The research specified the purpose of the discipline “Physical Education” in a pedagogical higher educational institution, and defined the health-preserving competence. Conclusions. The specific nature of the pedagogical profession requires that future teachers acquire the health-preserving competence within the discipline “Physical Education”, namely, the ability to maintain a general level of physical health needed to conduct social and professional activity.

  13. Determinants of Perceived Physical Environment Barriers among Community-Dwelling Elderly in Taiwan.

    Lien, W-C; Chang, J-H; Guo, N-W; Lin, Y-C; Hsieh, P-C; Kuan, T-S

    2015-05-01

    To test the hypothesis that mobility, activities of daily living, and the interaction between them can play a key role in determining perceived physical environment barriers among community-dwelling elderly. Cross-sectional. Community. One hundred and ninety-seven community-dwelling elderly with more than 7 points on the Short Portable Mental State Questionnaire and less than 7 points on the Geriatric Depression Scale (15 items). None. Time Get-up and Go test (TUG), the subscales of basic activity of daily living (BADL)/instrumental activities of daily living (IADL) of the Hierarchy of Care Required (HCR), and the physical/structural subscale of the Craig Hospital Inventory of Environmental Factors in Community-dwelling Elderly in Taiwan were used to measure mobility, activities of daily living and perceived physical environment barriers, respectively. Hierarchical linear regression analyses were used to test the study hypothesis. Significant and positive relations were found to exist between perceived physical environment barriers and (1) the TUG time (β=.300, pdwelling elderly under consideration. Strategies targeting the enhancement of mobility among community-dwelling elderly are suggested to lead to improvements in the degree to which physical environment barriers are perceived. This beneficial effect could be greater in the case of elderly individuals with better IADL function.

  14. Leisure Time Physical Activity and Its Determinants among Adults in Tehran: Tehran Lipid and Glucose Study.

    Momenan, Amir Abbas; Delshad, Maryam; Mirmiran, Parvin; Ghanbarian, Arash; Azizi, Fereidoun

    2011-10-01

    The aim of this study was to assess leisure time physical activity and its determinants among adults in Tehran. This cross-sectional study comprised adults (n = 7285), aged 20 years and older. The subjects were participants of the Tehran Lipid and Glucose Study between 2002 and 2004. Information on the number of days spent on different activities during a week and the time devoted to each activity on a typical day was recorded. In addition, each activity, weighted by its relative intensity, was referred to as a metabolic equivalent. The prevalence of inactivity was 69.8% (95% CI: 68.7-70.8) in the whole population and 30.2% (95% CI: 27.2-33.1%) of men and 30.3% (95% CI: 27.7-32.8%) of women were considered as active. Leisure time physical activity less than 30 min/week was scored in 1590 (50.6%) men and 1803 (43.5%) women. The most frequent leisure time physical activity performed by men (96.1%) and women (95.2%) was walking. A negative association was observed in men between leisure time physical activity and increased work hours, older age, more cigarette smoking and higher body mass index (69.8% were overweight and 75.3% were obese; P women. The prevalence of physical inactivity among adults in Tehran was high. Leisure time physical inactivity was more likely to be associated with older age, more cigarette smoking, more working hours, and higher body mass index. Public health efforts are needed to improve people's participation in physical activities in Iran.

  15. Use of combined method, accelerometer and international physical activity questionnaire, to determinate occurence of physical inactivity in adults

    Rodrigo Pereira da Silva

    2017-06-01

    Full Text Available Abstract Aim Evaluate and compare the proportion of PI and associated factors by IPAQ questionnaire, triaxial accelerometry and the combination of both. Adults aged ( 18 years were enrolled (n = 250. Methods We considered PI as < 600 MET-min/wk in the IPAQ total score, < 150 min/wk of moderate-to-vigorous physical activity in 7 days accelerometry, and the combination of both criteria. Clinical assessment, spirometry, cardiopulmonary exercise test, bioelectrical impedance, isokinetic dynamometry, postural balance, and six-minute walk test were also performed. For participants practicing aquatic, martial arts or cycling, only the IPAQ criterion was considered. Results Proportions of PI were significantly different among methods (IPAQ, 10%; accelerometry, 20%; combination, 25%. After multivariate logistic regressions, PI was determined by age, sex, educational level, risk factors for cardiovascular disease, lean body mass, cardiorespiratory fitness, and postural balance. Conclusion Thus, the combined method for determining PI and associated factors in adults showed great validity, indicating that questionnaires and accelerometers are complementary and should be utilized in combination in epidemiological studies.

  16. Determination of the TLD-100 physical parameters; Determinacion de parametros fisicos del TLD-100

    Paucar J, J.; Picon C, C. [Instituto Nacional de Enfermedades Neoplasicas. INEN. Av. Angamos Este 2520, Lima 34 (Peru)

    1998-12-31

    This study was realized in the Physics service at the Radiotherapy Department of the National Institute of Neoplasic Diseases in Lima, Peru, it was determined the activation energy, the kinetic order and the frequency factor of the fifth peak of the TLD-100 thermoluminescent spectra using different algorithms. This was carried out in parallel with the implementation and design of a software and an interface associated with the Tl lecturer which allows a semiautomatic control for a thermoluminescent lecturer process. (Author)

  17. Motivation, participation and performance in physical education: A self-determination approach.

    Langøy, Amund

    2014-01-01

    Introduction: Within the academic field there has been given increasing attention to motivation in physical education (PE). In the current study a Self-Determination Theory (SDT) model was tested in which (1) perceived autonomy support from teachers were hypothesized to be positively associated with students’ needs satisfaction, (2) which was expected to be positively associated with autonomous motivation and (3) negatively associated with amotivation. Further, (4) autonomous motivation was h...

  18. Quantifying the Ebbinghaus figure effect: Target size, context size, and target-context distance determine the presence and direction of the illusion.

    Hester eKnol

    2015-11-01

    Full Text Available Over the last 20 years, visual illusions, like the Ebbinghaus figure, have become widespread to investigate functional segregation of the visual system. This segregation reveals itself, so it is claimed, in the insensitivity of movement to optical illusions. This claim, however, faces contradictory results (and interpretations in the literature. These contradictions may be due to methodological weaknesses in, and differences across studies, some of which may hide a lack of perceptual illusion effects. Indeed, despite the long history of research with the Ebbinghaus figure, standardized configurations to predict the illusion effect are missing. Here, we present a complete geometrical description of the Ebbinghaus figure with three target sizes compatible with Fitts’ task. Each trial consisted of a stimulus and an isolated probe. The probe was controlled by the participant’s response through a staircase procedure. The participant was asked whether the probe or target appeared bigger. The factors target size, context size, target-context distance, and a control condition resulted in a 3×3×3+3 factorial design. The results indicate that the illusion magnitude, the perceptual distinctiveness, and the response time depend on the context size, distance, and especially, target size. In 33% of the factor combinations there was no illusion effect. The illusion magnitude ranged from zero to (exceptionally ten percent of the target size. The small (or absent illusion effects on perception and its possible influence on motor tasks might have been overlooked or misinterpreted in previous studies. Our results provide a basis for the application of the Ebbinghaus figure in psychophysical and motor control studies.

  19. Adult body size and physical activity in relation to risk of breast cancer according to tumor androgen receptor status.

    Zhang, Xuehong; Eliassen, A Heather; Tamimi, Rulla M; Hazra, Aditi; Beck, Andrew H; Brown, Myles; Collins, Laura C; Rosner, Bernard; Hankinson, Susan E

    2015-06-01

    Obesity and physical activity have been hypothesized to affect breast cancer risk partly via the androgen signaling pathway. We conducted the first study to evaluate these associations by tumor androgen receptor (AR) status. Height, weight, and physical activity were assessed using questionnaires in the Nurses' Health Study. AR, estrogen receptor (ER), and progesterone receptor (PR) status were determined using immunohistochemistry on tumor tissue and medical/pathology reports. A total of 1,701 AR(+) and 497 AR(-) cases were documented during 26 years of follow-up of 103,577 women. After adjusting for ER/PR status and other risk factors, the relative risks (RR) and 95% confidence intervals (95% CI) for every 5 kg/m(2) increase in body mass index (BMI) were 1.07 (1.01-1.13) for AR(+) and 1.16 (1.05-1.29) for AR(-) tumors (P-heterogeneity = 0.17). The RRs (95% CIs) per 5 hours of brisk walking/week were 0.87 (0.73-1.04) for AR(+) and 0.67 (0.45-0.99) for AR(-) tumors (P-heterogeneity = 0.22). Further, BMI, but not physical activity, associations differed significantly across ER/PR/AR subtypes (P-heterogeneity = 0.04 and 0.63, respectively). The RRs (95% CIs) for 5 kg/m(2) increase in BMI were 1.23 (1.04-1.45) for ER(+)PR(+)AR(-), 1.19 (1.01-1.39) for ER(-)PR(-)AR(-), 1.15 (1.08-1.23) for ER(+)PR(+)AR(+), and 0.88 (0.75-1.03) for ER(+)PR(-)AR(+) tumors. Higher BMI was associated with an increased risk of both AR(+) and AR(-) breast tumors in postmenopausal women, whereas physical activity, including brisk walking, was associated with a reduced risk of both subtypes. In addition, a significant positive association was observed between higher BMI and ER(-)PR(-)AR(-) tumors. The similar associations observed by AR status suggest that mechanisms other than androgen signaling underlie these two breast cancer risk factors. ©2015 American Association for Cancer Research.

  20. Determining which introductory physics topics pre-service physics teachers have difficulty understanding and what accounts for these difficulties

    Şahin, Esin; Yağbasan, Rahmi

    2012-01-01

    This study aims at diagnosing which subjects pre-service physics teachers have difficulty understanding in introductory physics courses and what accounts for these difficulties. A questionnaire consisting of two qualitative questions was used to collect data for this study. The questionnaire was administered to 101 pre-service physics teachers who have completed the courses Physics 1 (Mechanics 1), Physics 2 (Mechanics 2), Physics 3 (Electricity) and Physics 4 (Magnetism). Of the pre-service physics teachers 28 were second year, 26 were third year, 27 were fourth year and 20 were fifth year students. The results of the data analysis indicated that the percentage of students who think that Magnetism has the most difficult subjects is the highest compared to the others. The reasons why the pre-service physics teachers experience difficulty in understanding the subjects have been grouped into four categories. (paper)