Technical basis for dose reconstruction

International Nuclear Information System (INIS)

Anspaugh, L.R.

1996-01-01

The purpose of this paper is to consider two general topics: technical considerations of why dose-reconstruction studies should or should not be performed and methods of dose reconstruction. The first topic is of general and growing interest as the number of dose-reconstruction studies increases, and one asks the question whether it is necessary to perform a dose reconstruction for virtually every site at which, for example, the Department of Energy (DOE) has operated a nuclear-related facility. And there is the broader question of how one might logically draw the line at performing or not performing dose-reconstruction (radiological and chemical) studies for virtually every industrial complex in the entire country. The second question is also of general interest. There is no single correct way to perform a dose-reconstruction study, and it is important not to follow blindly a single method to the point that cheaper, faster, more accurate, and more transparent methods might not be developed and applied

My Vocational Situation (MVS): Case Example and Psychometric Review.

Science.gov (United States)

Nitsch, Kristian P; Pedersen, Jessica; Miliotto, Alexandra; Petersen, Brett; Robbins, Samantha; Garcia, Ana; Hoisington, Molly Ansel; The, Kimberly J; Smiley, Jill; Janikowski, Timothy

This case report provides an overview of the psychometric properties and clinical utility of the My Vocational Situation (MVS) instrument. The accompanying hypothetical case description illustrates how clinicians could use the MVS to evaluate vocational preferences and outcomes and how the MVS can be used to inform treatment planning and rehabilitation decision making. The information contained in this report is intended to familiarize clinicians with the administration and scoring of the MVS, the psychometric information necessary to interpret results obtained from the MVS, and how the results could be used to provide comprehensive, patient-centered care. It is important to note that the information provided represents only a sample of the available research literature on the MVS. Copyright © 2017 by the American Occupational Therapy Association, Inc.

Error Evaluation in a Stereovision-Based 3D Reconstruction System

Directory of Open Access Journals (Sweden)

Kohler Sophie

2010-01-01

Full Text Available The work presented in this paper deals with the performance analysis of the whole 3D reconstruction process of imaged objects, specifically of the set of geometric primitives describing their outline and extracted from a pair of images knowing their associated camera models. The proposed analysis focuses on error estimation for the edge detection process, the starting step for the whole reconstruction procedure. The fitting parameters describing the geometric features composing the workpiece to be evaluated are used as quality measures to determine error bounds and finally to estimate the edge detection errors. These error estimates are then propagated up to the final 3D reconstruction step. The suggested error analysis procedure for stereovision-based reconstruction tasks further allows evaluating the quality of the 3D reconstruction. The resulting final error estimates enable lastly to state if the reconstruction results fulfill a priori defined criteria, for example, fulfill dimensional constraints including tolerance information, for vision-based quality control applications for example.

The Temporalis Muscle Flap in Maxillofacial Reconstruction

International Nuclear Information System (INIS)

ElSheikh, M; Zeitoun, I; ElMassry, M A K

1991-01-01

The temporalis muscle flap is a very versatile and valuable axial flap, which could be used in various reconstructive procedures in and around the oro-maxillofacial region. The surgical anatomy, vascular pattern and technique of elevation of the flap are described, together with our experience in different reconstructive situations. The advantages and disadvantages of the use of this flap are thoroughly discussed taking into consideration the potentiality of cancer recurrence under cover of the flap. (author)

Radiation. Basics, influences, contamination situation, and countermeasures

International Nuclear Information System (INIS)

Baba, Mamoru; Nomura, Kiyoshi

2012-01-01

Fukushima Daiichi Nuclear Accident resulted in the contamination of a large area, and by now the situation of contamination and exposure has gradually clarified, and a lot of information has been being accumulated. Toward reconstruction of Fukushima prefecture from the current circumstance that the residents still live under continuing fear, this article discusses how to clarify the current situation and deal with the contamination, which the residents are concerned about. First, radiation, basic properties of radiation, and so on are introduced. Regarding the influence on human bodies, the mechanism and the degree of influence by radiation, especially on children, women, and pregnant women are explained. Next, regarding the measurements of radiation and radioactivity, the properties of measurement methods and the detectors are explained. Regarding the current situation of contamination and exposure, mainly addressing the area around Koriyama city, various topics are covered including: (1) situation of contamination and radiation monitoring, (2) countermeasures for radioactivity contamination, (3) internal exposure dose, (4) exposed dose from water and food, as well as (5) safety standards. (S.K.)

31 CFR Appendix A to Subpart C of... - Examples

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Examples A Appendix A to Subpart C of... A to Subpart C of Part 29—Examples This appendix contains sample calculations of Federal Benefit Payments in a variety of situations. Optional Retirement Examples Example 1: No Unused Sick Leave A. In...

Jini service to reconstruct tomographic data

Science.gov (United States)

Knoll, Peter; Mirzaei, S.; Koriska, K.; Koehn, H.

2002-06-01

A number of imaging systems rely on the reconstruction of a 3- dimensional model from its projections through the process of computed tomography (CT). In medical imaging, for example magnetic resonance imaging (MRI), positron emission tomography (PET), and Single Computer Tomography (SPECT) acquire two-dimensional projections of a three dimensional projections of a three dimensional object. In order to calculate the 3-dimensional representation of the object, i.e. its voxel distribution, several reconstruction algorithms have been developed. Currently, mainly two reconstruct use: the filtered back projection(FBP) and iterative methods. Although the quality of iterative reconstructed SPECT slices is better than that of FBP slices, such iterative algorithms are rarely used for clinical routine studies because of their low availability and increased reconstruction time. We used Jini and a self-developed iterative reconstructions algorithm to design and implement a Jini reconstruction service. With this service, the physician selects the patient study from a database and a Jini client automatically discovers the registered Jini reconstruction services in the department's Intranet. After downloading the proxy object the this Jini service, the SPECT acquisition data are reconstructed. The resulting transaxial slices are visualized using a Jini slice viewer, which can be used for various imaging modalities.

Photoacoustic image reconstruction via deep learning

Science.gov (United States)

Antholzer, Stephan; Haltmeier, Markus; Nuster, Robert; Schwab, Johannes

2018-02-01

Applying standard algorithms to sparse data problems in photoacoustic tomography (PAT) yields low-quality images containing severe under-sampling artifacts. To some extent, these artifacts can be reduced by iterative image reconstruction algorithms which allow to include prior knowledge such as smoothness, total variation (TV) or sparsity constraints. These algorithms tend to be time consuming as the forward and adjoint problems have to be solved repeatedly. Further, iterative algorithms have additional drawbacks. For example, the reconstruction quality strongly depends on a-priori model assumptions about the objects to be recovered, which are often not strictly satisfied in practical applications. To overcome these issues, in this paper, we develop direct and efficient reconstruction algorithms based on deep learning. As opposed to iterative algorithms, we apply a convolutional neural network, whose parameters are trained before the reconstruction process based on a set of training data. For actual image reconstruction, a single evaluation of the trained network yields the desired result. Our presented numerical results (using two different network architectures) demonstrate that the proposed deep learning approach reconstructs images with a quality comparable to state of the art iterative reconstruction methods.

Optimization of reconstruction algorithms using Monte Carlo simulation

International Nuclear Information System (INIS)

Hanson, K.M.

1989-01-01

A method for optimizing reconstruction algorithms is presented that is based on how well a specified task can be performed using the reconstructed images. Task performance is numerically assessed by a Monte Carlo simulation of the complete imaging process including the generation of scenes appropriate to the desired application, subsequent data taking, reconstruction, and performance of the stated task based on the final image. The use of this method is demonstrated through the optimization of the Algebraic Reconstruction Technique (ART), which reconstructs images from their projections by a iterative procedure. The optimization is accomplished by varying the relaxation factor employed in the updating procedure. In some of the imaging situations studied, it is found that the optimization of constrained ART, in which a nonnegativity constraint is invoked, can vastly increase the detectability of objects. There is little improvement attained for unconstrained ART. The general method presented may be applied to the problem of designing neutron-diffraction spectrometers. 11 refs., 6 figs., 2 tabs

Optimization of reconstruction algorithms using Monte Carlo simulation

International Nuclear Information System (INIS)

Hanson, K.M.

1989-01-01

A method for optimizing reconstruction algorithms is presented that is based on how well a specified task can be performed using the reconstructed images. Task performance is numerically assessed by a Monte Carlo simulation of the complete imaging process including the generation of scenes appropriate to the desired application, subsequent data taking, reconstruction, and performance of the stated task based on the final image. The use of this method is demonstrated through the optimization of the Algebraic Reconstruction Technique (ART), which reconstructs images from their projections by an iterative procedure. The optimization is accomplished by varying the relaxation factor employed in the updating procedure. In some of the imaging situations studied, it is found that the optimization of constrained ART, in which a non-negativity constraint is invoked, can vastly increase the detectability of objects. There is little improvement attained for unconstrained ART. The general method presented may be applied to the problem of designing neutron-diffraction spectrometers. (author)

Reconstructing warm inflation

Science.gov (United States)

Herrera, Ramón

2018-03-01

The reconstruction of a warm inflationary universe model from the scalar spectral index n_S(N) and the tensor to scalar ratio r( N) as a function of the number of e-folds N is studied. Under a general formalism we find the effective potential and the dissipative coefficient in terms of the cosmological parameters n_S and r considering the weak and strong dissipative stages under the slow roll approximation. As a specific example, we study the attractors for the index n_S given by nS-1∝ N^{-1} and for the ratio r∝ N^{-2}, in order to reconstruct the model of warm inflation. Here, expressions for the effective potential V(φ ) and the dissipation coefficient Γ (φ ) are obtained.

Tensor-based dictionary learning for dynamic tomographic reconstruction

International Nuclear Information System (INIS)

Tan, Shengqi; Wu, Zhifang; Zhang, Yanbo; Mou, Xuanqin; Wang, Ge; Cao, Guohua; Yu, Hengyong

2015-01-01

In dynamic computed tomography (CT) reconstruction, the data acquisition speed limits the spatio-temporal resolution. Recently, compressed sensing theory has been instrumental in improving CT reconstruction from far few-view projections. In this paper, we present an adaptive method to train a tensor-based spatio-temporal dictionary for sparse representation of an image sequence during the reconstruction process. The correlations among atoms and across phases are considered to capture the characteristics of an object. The reconstruction problem is solved by the alternating direction method of multipliers. To recover fine or sharp structures such as edges, the nonlocal total variation is incorporated into the algorithmic framework. Preclinical examples including a sheep lung perfusion study and a dynamic mouse cardiac imaging demonstrate that the proposed approach outperforms the vectorized dictionary-based CT reconstruction in the case of few-view reconstruction. (paper)

Tensor-based Dictionary Learning for Dynamic Tomographic Reconstruction

Science.gov (United States)

Tan, Shengqi; Zhang, Yanbo; Wang, Ge; Mou, Xuanqin; Cao, Guohua; Wu, Zhifang; Yu, Hengyong

2015-01-01

In dynamic computed tomography (CT) reconstruction, the data acquisition speed limits the spatio-temporal resolution. Recently, compressed sensing theory has been instrumental in improving CT reconstruction from far few-view projections. In this paper, we present an adaptive method to train a tensor-based spatio-temporal dictionary for sparse representation of an image sequence during the reconstruction process. The correlations among atoms and across phases are considered to capture the characteristics of an object. The reconstruction problem is solved by the alternating direction method of multipliers. To recover fine or sharp structures such as edges, the nonlocal total variation is incorporated into the algorithmic framework. Preclinical examples including a sheep lung perfusion study and a dynamic mouse cardiac imaging demonstrate that the proposed approach outperforms the vectorized dictionary-based CT reconstruction in the case of few-view reconstruction. PMID:25779991

Bone recycling in nasal septal reconstruction.

Science.gov (United States)

Apaydin, Fazil

2013-12-01

Septal reconstruction alone or together with rhinoplasty can be a very challenging operation. In situations where septal cartilage is used for grafting or is not enough, bony implants taken from the perpendicular plate of the ethmoid and vomer can be used as a filler material between the mucoperichondrial flaps to avoid from unwanted mucosal atrophy, flapping, and septal perforation. These bony implants can also be used for splinting the dorsal and/or caudal segment of the septal cartilage after reshaping by rongeurs. On rare occasions, they can even be used for subtotal reconstruction of the septum. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

The application of transportation models in emergency situations: Example of a hypothetical city

Directory of Open Access Journals (Sweden)

Antić Jovana Z.

2015-01-01

Full Text Available Emergency situations, where mass evacuation of people is present, are serious problem that is difficult to resolve. Such events have become more frequent in recent years. The transportation network is a key part of the infrastructure when it comes to events with disastrous consequences, because a large population of people must be effectively evacuated from densely populated urban areas. Therefore, requirements during an evacuation process are made in a relatively short period of time, and available capacity of the road network has become the main resource to be efficiently utilized in order to shorten the time required for evacuation. By using transportation model, the paper presents the simulation of the traffic in a situation when there is a need to evacuate large numbers of people, in order to propose measures that could be efficiently used.

Superfast maximum-likelihood reconstruction for quantum tomography

Science.gov (United States)

Shang, Jiangwei; Zhang, Zhengyun; Ng, Hui Khoon

2017-06-01

Conventional methods for computing maximum-likelihood estimators (MLE) often converge slowly in practical situations, leading to a search for simplifying methods that rely on additional assumptions for their validity. In this work, we provide a fast and reliable algorithm for maximum-likelihood reconstruction that avoids this slow convergence. Our method utilizes the state-of-the-art convex optimization scheme, an accelerated projected-gradient method, that allows one to accommodate the quantum nature of the problem in a different way than in the standard methods. We demonstrate the power of our approach by comparing its performance with other algorithms for n -qubit state tomography. In particular, an eight-qubit situation that purportedly took weeks of computation time in 2005 can now be completed in under a minute for a single set of data, with far higher accuracy than previously possible. This refutes the common claim that MLE reconstruction is slow and reduces the need for alternative methods that often come with difficult-to-verify assumptions. In fact, recent methods assuming Gaussian statistics or relying on compressed sensing ideas are demonstrably inapplicable for the situation under consideration here. Our algorithm can be applied to general optimization problems over the quantum state space; the philosophy of projected gradients can further be utilized for optimization contexts with general constraints.

Apparatus and method for reconstructing data

International Nuclear Information System (INIS)

Pavkovich, J.M.

1977-01-01

The apparatus and method for reconstructing data are described. A fan beam of radiation is passed through an object, the beam lying in the same quasi-plane as the object slice to be examined. Radiation not absorbed in the object slice is recorded on oppositely situated detectors aligned with the source of radiation. Relative rotation is provided between the source-detector configuration and the object. Reconstruction means are coupled to the detector means, and may comprise a general purpose computer, a special purpose computer, and control logic for interfacing between said computers and controlling the respective functioning thereof for performing a convolution and back projection based upon non-absorbed radiation detected by said detector means, whereby the reconstruction means converts values of the non-absorbed radiation into values of absorbed radiation at each of an arbitrarily large number of points selected within the object slice. Display means are coupled to the reconstruction means for providing a visual or other display or representation of the quantities of radiation absorbed at the points considered in the object. (Auth.)

Principles and reconstruction of the ancient sea levels during the Quaternary

International Nuclear Information System (INIS)

Martin, L.; Flexor, J.M.; Suguio, K.

1986-01-01

This work focused the multiple aspects related to the ''reconstruction of the ancient sea level during the Quaternary''. The relative sea level, fluctuations are produced by true variations of the level (eustasy) and by changes in the land level (tectonism and isostasy). The changes of the relative levels are reconstructed through several evidence of these fluctuations, which are recognised in time and space. To define their situation in space is necessary to know their present altitude in relation to their original altitude, that is, to determine their position in relation to the sea level during their formation or sedimentation. Their situation in time is determined by measuring the moment of their formation or sedimentation, using for this the dating methods (isotopic, archeological, etc.) When numerous ancient levels could be reconstructed, spread through a considerable time interval, is possible to delineate the sea level fluctuation curve for this period. (C.D.G.) [pt

On issue of reconstruction at central distribution substation by example of one of plants of Chelyabinsk region

Science.gov (United States)

Brylina, O. G.; Semenova, K. D.; Shashkin, V. YU

2018-03-01

The article considers the issues of increasing the reliability and economy of the distribution substation. The result is found due to the reconstruction of the central distribution substation and one of the plants of Chelyabinsk region. The reasons for the reconstruction are explained. A comparison of oil and vacuum circuit breakers is made. The advantages of vacuum circuit breakers are shown. Alternative replacement of cables is offered. The basic technical characteristics of the cable brands are shown. The results of reconstruction are proved.

Predicting supramolecular self-assembly on reconstructed metal surfaces

Science.gov (United States)

Roussel, Thomas J.; Barrena, Esther; Ocal, Carmen; Faraudo, Jordi

2014-06-01

The prediction of supramolecular self-assembly onto solid surfaces is still challenging in many situations of interest for nanoscience. In particular, no previous simulation approach has been capable to simulate large self-assembly patterns of organic molecules over reconstructed surfaces (which have periodicities over large distances) due to the large number of surface atoms and adsorbing molecules involved. Using a novel simulation technique, we report here large scale simulations of the self-assembly patterns of an organic molecule (DIP) over different reconstructions of the Au(111) surface. We show that on particular reconstructions, the molecule-molecule interactions are enhanced in a way that long-range order is promoted. Also, the presence of a distortion in a reconstructed surface pattern not only induces the presence of long-range order but also is able to drive the organization of DIP into two coexisting homochiral domains, in quantitative agreement with STM experiments. On the other hand, only short range order is obtained in other reconstructions of the Au(111) surface. The simulation strategy opens interesting perspectives to tune the supramolecular structure by simulation design and surface engineering if choosing the right molecular building blocks and stabilising the chosen reconstruction pattern.The prediction of supramolecular self-assembly onto solid surfaces is still challenging in many situations of interest for nanoscience. In particular, no previous simulation approach has been capable to simulate large self-assembly patterns of organic molecules over reconstructed surfaces (which have periodicities over large distances) due to the large number of surface atoms and adsorbing molecules involved. Using a novel simulation technique, we report here large scale simulations of the self-assembly patterns of an organic molecule (DIP) over different reconstructions of the Au(111) surface. We show that on particular reconstructions, the molecule

TECHNIQUES FOR RECONSTRUCTION OF THE PRESERVED HOUSING STOCK

Directory of Open Access Journals (Sweden)

Kustikova Yuliya Olegovna

2017-10-01

Full Text Available Nowadays in Russian cities a significant part of the housing stock in areas of existing buildings has a high level of physical and moral deterioration, indicators of infrastructure elements do not meet the current and future requirements. Reconstruction of residential buildings is one of the important directions in solving the housing problem. This will allow us to not only extend the life cycle but also significantly improve the quality of housing, eliminate a communal settlement, provide the houses with modern engineering equipment, improve architectural expressiveness of buildings and increase their energy efficiency. For buildings of different construction periods an individual approach is required in the development of methods and technologies of reconstruction. At the same time, the process should take place not in a separate building but in a group of buildings, neighborhood or district. This makes it possible to undertake a comprehensive assessment of the urban development situation and make the most rational decisions to meet modern conditions, and provide logical connection between various architectural trends. At the same time, there are possibilities for compaction and decompaction of buildings, the rational use of inter-district, underground space and communication systems. Moscow region is a large region, which occupies an area of 46 thousand square kilometers. The region includes more than 38 municipalities (municipal districts, urban and rural settlements. The region’s population is more than 7 million people. Moscow oblast has a central location in the Russian Federation and a close relationship with the capital. This relationship with Moscow is manifested through common social, scientific, industrial, transport links, environmental protection problems, labor resources. In 2016 the total area of the housing stock in Moscow region was about 220 million sq. m. The total area of dilapidated and emergency housing stock is just

Computed tomographic reconstruction of beam profiles with a multi-wire chamber

International Nuclear Information System (INIS)

Alonso, J.R.; Tobias, C.A.; Chu, W.T.

1979-03-01

MEDUSA (MEdical Dose Uniformity SAmpler), a 16 plane multi-wire proportional chamber, has been built to accurately measure beam profiles. The large number of planes allows for reconstruction of highly detailed beam intensity structures by means of Fourier convolution reconstruction techniques. This instrument is being used for verification and tuning of the Bevalac radiotherapy beams, but has potential applications in many beam profile monitoring situations

["Long-branch Attraction" artifact in phylogenetic reconstruction].

Science.gov (United States)

Li, Yi-Wei; Yu, Li; Zhang, Ya-Ping

2007-06-01

Phylogenetic reconstruction among various organisms not only helps understand their evolutionary history but also reveal several fundamental evolutionary questions. Understanding of the evolutionary relationships among organisms establishes the foundation for the investigations of other biological disciplines. However, almost all the widely used phylogenetic methods have limitations which fail to eliminate systematic errors effectively, preventing the reconstruction of true organismal relationships. "Long-branch Attraction" (LBA) artifact is one of the most disturbing factors in phylogenetic reconstruction. In this review, the conception and analytic method as well as the avoidance strategy of LBA were summarized. In addition, several typical examples were provided. The approach to avoid and resolve LBA artifact has been discussed.

A Statistical Approach to Motion Compensated Cone Beam Reconstruction

DEFF Research Database (Denmark)

Lyksborg, Mark; Hansen, Mads Fogtmann; Larsen, Rasmus

2010-01-01

number of projections to be adequate. Since the patients are breathing freely during a scan, the number of projections with similar respiration may be to low. In the following we use an iterative reconstruction combined with the simultaneous estimation of the motion field, to improve reconstruction...... in these situations. Using a simulated dataset we demonstrate that this combination outperforms the FDK but due to ill possessedness of the motion estimation it is only on par with the sole iterative method....

Existential vulnerability: toward a psychopathology of limit situations.

Science.gov (United States)

Fuchs, Thomas

2013-01-01

Jaspers' concept of limit situations seems particularly appropriate not only to elucidate outstanding existential situations in general, but also basic preconditions for the occurrence of mental disorders. For this purpose, the concept is first explained in Jaspers' sense and then related to an 'existential vulnerability' of mentally ill persons that makes them experience even inconspicuous events as distressing limit situations. In such situations, an otherwise hidden fundamental condition of existence becomes manifest for them, e.g. the fragility of one's own body, the inevitability of freedom, or the finiteness of life. This fundamental condition is found unbearable and, as a reaction, gives rise to mental illness. This concept of existential vulnerability is illustrated by some psychopathological examples. © 2013 S. Karger AG, Basel.

Cosmological reconstruction of realistic modified F(R) gravities

International Nuclear Information System (INIS)

Nojiri, Shin'ichi; Odintsov, Sergei D.; Saez-Gomez, Diego

2009-01-01

The cosmological reconstruction scheme for modified F(R) gravity is developed in terms of e-folding (or, redshift). It is demonstrated how any FRW cosmology may emerge from specific F(R) theory. The specific examples of well-known cosmological evolution are reconstructed, including ΛCDM cosmology, deceleration with transition to phantom superacceleration era which may develop singularity or be transient. The application of this scheme to viable F(R) gravities unifying inflation with dark energy era is proposed. The additional reconstruction of such models leads to non-leading gravitational correction mainly relevant at the early/late universe and helping to pass the cosmological bounds (if necessary). It is also shown how cosmological reconstruction scheme may be generalized in the presence of scalar field.

Fast parallel algorithm for CT image reconstruction.

Science.gov (United States)

Flores, Liubov A; Vidal, Vicent; Mayo, Patricia; Rodenas, Francisco; Verdú, Gumersindo

2012-01-01

In X-ray computed tomography (CT) the X rays are used to obtain the projection data needed to generate an image of the inside of an object. The image can be generated with different techniques. Iterative methods are more suitable for the reconstruction of images with high contrast and precision in noisy conditions and from a small number of projections. Their use may be important in portable scanners for their functionality in emergency situations. However, in practice, these methods are not widely used due to the high computational cost of their implementation. In this work we analyze iterative parallel image reconstruction with the Portable Extensive Toolkit for Scientific computation (PETSc).

Reconstruction of chaotic signals with applications to chaos-based communications

CERN Document Server

Feng, Jiu Chao

2008-01-01

This book provides a systematic review of the fundamental theory of signal reconstruction and the practical techniques used in reconstructing chaotic signals. Specific applications of signal reconstruction methods in chaos-based communications are expounded in full detail, along with examples illustrating the various problems associated with such applications.The book serves as an advanced textbook for undergraduate and graduate courses in electronic and information engineering, automatic control, physics and applied mathematics. It is also highly suited for general nonlinear scientists who wi

29 CFR 785.36 - Home to work in emergency situations.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Home to work in emergency situations. 785.36 Section 785.36... Principles Traveltime § 785.36 Home to work in emergency situations. There may be instances when travel from home to work is overtime. For example, if an employee who has gone home after completing his day's work...

Structural algorithm to reservoir reconstruction using passive seismic data (synthetic example)

Energy Technology Data Exchange (ETDEWEB)

Smaglichenko, Tatyana A.; Volodin, Igor A.; Lukyanitsa, Andrei A.; Smaglichenko, Alexander V.; Sayankina, Maria K. [Oil and Gas Research Institute, Russian Academy of Science, Gubkina str.3, 119333, Moscow (Russian Federation); Faculty of Computational Mathematics and Cybernetics, M.V. Lomonosov Moscow State University, Leninskie gory, 1, str.52,Second Teaching Building.119991 Moscow (Russian Federation); Shmidt' s Institute of Physics of the Earth, Russian Academy of Science, Bolshaya Gruzinskaya str. 10, str.1, 123995 Moscow (Russian Federation); Oil and Gas Research Institute, Russian Academy of Science, Gubkina str.3, 119333, Moscow (Russian Federation)

2012-09-26

Using of passive seismic observations to detect a reservoir is a new direction of prospecting and exploration of hydrocarbons. In order to identify thin reservoir model we applied the modification of Gaussian elimination method in conditions of incomplete synthetic data. Because of the singularity of a matrix conventional method does not work. Therefore structural algorithm has been developed by analyzing the given model as a complex model. Numerical results demonstrate of its advantage compared with usual way of solution. We conclude that the gas reservoir is reconstructed by retrieving of the image of encasing shale beneath it.

A multiresolution approach to iterative reconstruction algorithms in X-ray computed tomography.

Science.gov (United States)

De Witte, Yoni; Vlassenbroeck, Jelle; Van Hoorebeke, Luc

2010-09-01

In computed tomography, the application of iterative reconstruction methods in practical situations is impeded by their high computational demands. Especially in high resolution X-ray computed tomography, where reconstruction volumes contain a high number of volume elements (several giga voxels), this computational burden prevents their actual breakthrough. Besides the large amount of calculations, iterative algorithms require the entire volume to be kept in memory during reconstruction, which quickly becomes cumbersome for large data sets. To overcome this obstacle, we present a novel multiresolution reconstruction, which greatly reduces the required amount of memory without significantly affecting the reconstructed image quality. It is shown that, combined with an efficient implementation on a graphical processing unit, the multiresolution approach enables the application of iterative algorithms in the reconstruction of large volumes at an acceptable speed using only limited resources.

Interval-based reconstruction for uncertainty quantification in PET

Science.gov (United States)

Kucharczak, Florentin; Loquin, Kevin; Buvat, Irène; Strauss, Olivier; Mariano-Goulart, Denis

2018-02-01

A new directed interval-based tomographic reconstruction algorithm, called non-additive interval based expectation maximization (NIBEM) is presented. It uses non-additive modeling of the forward operator that provides intervals instead of single-valued projections. The detailed approach is an extension of the maximum likelihood—expectation maximization algorithm based on intervals. The main motivation for this extension is that the resulting intervals have appealing properties for estimating the statistical uncertainty associated with the reconstructed activity values. After reviewing previously published theoretical concepts related to interval-based projectors, this paper describes the NIBEM algorithm and gives examples that highlight the properties and advantages of this interval valued reconstruction.

Practical algorithms for simulation and reconstruction of digital in-line holograms.

Science.gov (United States)

Latychevskaia, Tatiana; Fink, Hans-Werner

2015-03-20

Here we present practical methods for simulation and reconstruction of in-line digital holograms recorded with plane and spherical waves. The algorithms described here are applicable to holographic imaging of an object exhibiting absorption as well as phase-shifting properties. Optimal parameters, related to distances, sampling rate, and other factors for successful simulation and reconstruction of holograms are evaluated and criteria for the achievable resolution are worked out. Moreover, we show that the numerical procedures for the reconstruction of holograms recorded with plane and spherical waves are identical under certain conditions. Experimental examples of holograms and their reconstructions are also discussed.

The Algebraic Reconstruction Technique (ART)

International Nuclear Information System (INIS)

Raparia, D.; Alessi, J.; Kponou, A.

1997-01-01

Projections of charged particle beam current density (profiles) are frequently used as a measure of beam position and size. In conventional practice only two projections, usually horizontal and vertical, are measured. This puts a severe limit on the detail of information that can be achieved. A third projection provides a significant improvement. The Algebraic Reconstruction Technique (ART) uses three or more projections to reconstruct 3-dimensional density profiles. At the 200 MeV H-linac, we have used this technique to measure beam density, and it has proved very helpful, especially in helping determine if there is any coupling present in x-y phase space. We will present examples of measurements of current densities using this technique

Function reconstruction from noisy local averages

International Nuclear Information System (INIS)

Chen Yu; Huang Jianguo; Han Weimin

2008-01-01

A regularization method is proposed for the function reconstruction from noisy local averages in any dimension. Error bounds for the approximate solution in L 2 -norm are derived. A number of numerical examples are provided to show computational performance of the method, with the regularization parameters selected by different strategies

Method of Computer-aided Instruction in Situation Control Systems

Directory of Open Access Journals (Sweden)

Anatoliy O. Kargin

2013-01-01

Full Text Available The article considers the problem of computer-aided instruction in context-chain motivated situation control system of the complex technical system behavior. The conceptual and formal models of situation control with practical instruction are considered. Acquisition of new behavior knowledge is presented as structural changes in system memory in the form of situational agent set. Model and method of computer-aided instruction represent formalization, based on the nondistinct theories by physiologists and cognitive psychologists.The formal instruction model describes situation and reaction formation and dependence on different parameters, effecting education, such as the reinforcement value, time between the stimulus, action and the reinforcement. The change of the contextual link between situational elements when using is formalized.The examples and results of computer instruction experiments of the robot device “LEGO MINDSTORMS NXT”, equipped with ultrasonic distance, touch, light sensors.

Updates in Head and Neck Reconstruction.

Science.gov (United States)

Largo, Rene D; Garvey, Patrick B

2018-02-01

After reading this article, the participant should be able to: 1. Have a basic understanding of virtual planning, rapid prototype modeling, three-dimensional printing, and computer-assisted design and manufacture. 2. Understand the principles of combining virtual planning and vascular mapping. 3. Understand principles of flap choice and design in preoperative planning of free osteocutaneous flaps in mandible and midface reconstruction. 4. Discuss advantages and disadvantages of computer-assisted design and manufacture in reconstruction of advanced oncologic mandible and midface defects. Virtual planning and rapid prototype modeling are increasingly used in head and neck reconstruction with the aim of achieving superior surgical outcomes in functionally and aesthetically critical areas of the head and neck compared with conventional reconstruction. The reconstructive surgeon must be able to understand this rapidly-advancing technology, along with its advantages and disadvantages. There is no limit to the degree to which patient-specific data may be integrated into the virtual planning process. For example, vascular mapping can be incorporated into virtual planning of mandible or midface reconstruction. Representative mandible and midface cases are presented to illustrate the process of virtual planning. Although virtual planning has become helpful in head and neck reconstruction, its routine use may be limited by logistic challenges, increased acquisition costs, and limited flexibility for intraoperative modifications. Nevertheless, the authors believe that the superior functional and aesthetic results realized with virtual planning outweigh the limitations.

Reconstructed frontal and coronal cuts in computed tomography of the trunk

International Nuclear Information System (INIS)

Fochem, K.; Klumair, J.

1982-01-01

A comparison between the original coronally cuts and the reconstructed coronal cuts yielded basic information on the loss of quality by computed reconstruction of images. As for the trunk, only comparisons between the conventional linear tomography and computed frontal of trunk cuts are possible. A few examples will demonstrate that despite a considerable loss of quality, computed frontal cuts will supply additional information in certain cases. It is also shown that the reconstructed frontal cuts cannot replace conventional tomography. (orig.) [de

The situation of the earthquake-proof reconstruction construction using laser measurement

International Nuclear Information System (INIS)

Maruyama, Tomoyoshi

2009-01-01

Until now, the on-site investigation in a nuclear power plant performs measurement by the hand for which the worker used the tape measure etc., and although the technique of making the fair copy of a sketch figure in handwriting is adopted conventionally, since it becomes the work under high dose environment while being inefficient-like, a big improvement towards contamination reduction is being desired. This report carries in 3D laser measurement apparatus in a nuclear power plant, and reports the situation developed to on-site investigation - formation nature investigation - earthquake-proof construction. (author)

Automating 3D reconstruction using a probabilistic grammar

Science.gov (United States)

Xiong, Hanwei; Xu, Jun; Xu, Chenxi; Pan, Ming

2015-10-01

3D reconstruction of objects from point clouds with a laser scanner is still a laborious task in many applications. Automating 3D process is an ongoing research topic and suffers from the complex structure of the data. The main difficulty is due to lack of knowledge of real world objects structure. In this paper, we accumulate such structure knowledge by a probabilistic grammar learned from examples in the same category. The rules of the grammar capture compositional structures at different levels, and a feature dependent probability function is attached for every rule. The learned grammar can be used to parse new 3D point clouds, organize segment patches in a hierarchal way, and assign them meaningful labels. The parsed semantics can be used to guide the reconstruction algorithms automatically. Some examples are given to explain the method.

Could situational judgement tests be used for selection into dental foundation training?

Science.gov (United States)

Patterson, F; Ashworth, V; Mehra, S; Falcon, H

2012-07-13

To pilot and evaluate a machine-markable situational judgement test (SJT) designed to select candidates into UK dental foundation training. Single centre pilot study. UK postgraduate deanery in 2010. Seventy-four candidates attending interview for dental foundation training in Oxford and Wessex Deaneries volunteered to complete the situational judgement test. The situational judgement test was developed to assess relevant professional attributes for dentistry (for example, empathy and integrity) in a machine-markable format. Test content was developed by subject matter experts working with experienced psychometricians. Evaluation of psychometric properties of the pilot situational judgement test (for example, reliability, validity and fairness). Scores in the dental foundation training selection process (short-listing and interviews) were used to examine criterion-related validity. Candidates completed an evaluation questionnaire to examine candidate reactions and face validity of the new test. Forty-six candidates were female and 28 male; mean age was 23.5-years-old (range 22-32). Situational judgement test scores were normally distributed and the test showed good internal reliability when corrected for test length (α = 0.74). Situational judgement test scores positively correlated with the management, leadership and professionalism interview (N = 50; r = 0.43, p fair. This initial pilot study suggests that a situational judgement test is an appropriate and innovative method to measure professional attributes (eg empathy and integrity) for selection into foundation training. Further research will explore the long-term predictive validity of the situational judgement test once candidates have entered training.

Big data for space situation awareness

Science.gov (United States)

Blasch, Erik; Pugh, Mark; Sheaff, Carolyn; Raquepas, Joe; Rocci, Peter

2017-05-01

Recent advances in big data (BD) have focused research on the volume, velocity, veracity, and variety of data. These developments enable new opportunities in information management, visualization, machine learning, and information fusion that have potential implications for space situational awareness (SSA). In this paper, we explore some of these BD trends as applicable for SSA towards enhancing the space operating picture. The BD developments could increase in measures of performance and measures of effectiveness for future management of the space environment. The global SSA influences include resident space object (RSO) tracking and characterization, cyber protection, remote sensing, and information management. The local satellite awareness can benefit from space weather, health monitoring, and spectrum management for situation space understanding. One area in big data of importance to SSA is value - getting the correct data/information at the right time, which corresponds to SSA visualization for the operator. A SSA big data example is presented supporting disaster relief for space situation awareness, assessment, and understanding.

Grey situation group decision-making method based on prospect theory.

Science.gov (United States)

Zhang, Na; Fang, Zhigeng; Liu, Xiaqing

2014-01-01

This paper puts forward a grey situation group decision-making method on the basis of prospect theory, in view of the grey situation group decision-making problems that decisions are often made by multiple decision experts and those experts have risk preferences. The method takes the positive and negative ideal situation distance as reference points, defines positive and negative prospect value function, and introduces decision experts' risk preference into grey situation decision-making to make the final decision be more in line with decision experts' psychological behavior. Based on TOPSIS method, this paper determines the weight of each decision expert, sets up comprehensive prospect value matrix for decision experts' evaluation, and finally determines the optimal situation. At last, this paper verifies the effectiveness and feasibility of the method by means of a specific example.

GEODESIC RECONSTRUCTION, SADDLE ZONES & HIERARCHICAL SEGMENTATION

Directory of Open Access Journals (Sweden)

Serge Beucher

2011-05-01

Full Text Available The morphological reconstruction based on geodesic operators, is a powerful tool in mathematical morphology. The general definition of this reconstruction supposes the use of a marker function f which is not necessarily related to the function g to be built. However, this paper deals with operations where the marker function is defined from given characteristic regions of the initial function f, as it is the case, for instance, for the extrema (maxima or minima but also for the saddle zones. Firstly, we show that the intuitive definition of a saddle zone is not easy to handle, especially when digitised images are involved. However, some of these saddle zones (regional ones also called overflow zones can be defined, this definition providing a simple algorithm to extract them. The second part of the paper is devoted to the use of these overflow zones as markers in image reconstruction. This reconstruction provides a new function which exhibits a new hierarchy of extrema. This hierarchy is equivalent to the hierarchy produced by the so-called waterfall algorithm. We explain why the waterfall algorithm can be achieved by performing a watershed transform of the function reconstructed by its initial watershed lines. Finally, some examples of use of this hierarchical segmentation are described.

Accelerated Compressed Sensing Based CT Image Reconstruction.

Science.gov (United States)

Hashemi, SayedMasoud; Beheshti, Soosan; Gill, Patrick R; Paul, Narinder S; Cobbold, Richard S C

2015-01-01

In X-ray computed tomography (CT) an important objective is to reduce the radiation dose without significantly degrading the image quality. Compressed sensing (CS) enables the radiation dose to be reduced by producing diagnostic images from a limited number of projections. However, conventional CS-based algorithms are computationally intensive and time-consuming. We propose a new algorithm that accelerates the CS-based reconstruction by using a fast pseudopolar Fourier based Radon transform and rebinning the diverging fan beams to parallel beams. The reconstruction process is analyzed using a maximum-a-posterior approach, which is transformed into a weighted CS problem. The weights involved in the proposed model are calculated based on the statistical characteristics of the reconstruction process, which is formulated in terms of the measurement noise and rebinning interpolation error. Therefore, the proposed method not only accelerates the reconstruction, but also removes the rebinning and interpolation errors. Simulation results are shown for phantoms and a patient. For example, a 512 × 512 Shepp-Logan phantom when reconstructed from 128 rebinned projections using a conventional CS method had 10% error, whereas with the proposed method the reconstruction error was less than 1%. Moreover, computation times of less than 30 sec were obtained using a standard desktop computer without numerical optimization.

Accelerated Compressed Sensing Based CT Image Reconstruction

Directory of Open Access Journals (Sweden)

SayedMasoud Hashemi

2015-01-01

Full Text Available In X-ray computed tomography (CT an important objective is to reduce the radiation dose without significantly degrading the image quality. Compressed sensing (CS enables the radiation dose to be reduced by producing diagnostic images from a limited number of projections. However, conventional CS-based algorithms are computationally intensive and time-consuming. We propose a new algorithm that accelerates the CS-based reconstruction by using a fast pseudopolar Fourier based Radon transform and rebinning the diverging fan beams to parallel beams. The reconstruction process is analyzed using a maximum-a-posterior approach, which is transformed into a weighted CS problem. The weights involved in the proposed model are calculated based on the statistical characteristics of the reconstruction process, which is formulated in terms of the measurement noise and rebinning interpolation error. Therefore, the proposed method not only accelerates the reconstruction, but also removes the rebinning and interpolation errors. Simulation results are shown for phantoms and a patient. For example, a 512 × 512 Shepp-Logan phantom when reconstructed from 128 rebinned projections using a conventional CS method had 10% error, whereas with the proposed method the reconstruction error was less than 1%. Moreover, computation times of less than 30 sec were obtained using a standard desktop computer without numerical optimization.

Phylogenetic reconstruction methods: an overview.

Science.gov (United States)

De Bruyn, Alexandre; Martin, Darren P; Lefeuvre, Pierre

2014-01-01

Initially designed to infer evolutionary relationships based on morphological and physiological characters, phylogenetic reconstruction methods have greatly benefited from recent developments in molecular biology and sequencing technologies with a number of powerful methods having been developed specifically to infer phylogenies from macromolecular data. This chapter, while presenting an overview of basic concepts and methods used in phylogenetic reconstruction, is primarily intended as a simplified step-by-step guide to the construction of phylogenetic trees from nucleotide sequences using fairly up-to-date maximum likelihood methods implemented in freely available computer programs. While the analysis of chloroplast sequences from various Vanilla species is used as an illustrative example, the techniques covered here are relevant to the comparative analysis of homologous sequences datasets sampled from any group of organisms.

A SPECT reconstruction method for extending parallel to non-parallel geometries

International Nuclear Information System (INIS)

Wen Junhai; Liang Zhengrong

2010-01-01

Due to its simplicity, parallel-beam geometry is usually assumed for the development of image reconstruction algorithms. The established reconstruction methodologies are then extended to fan-beam, cone-beam and other non-parallel geometries for practical application. This situation occurs for quantitative SPECT (single photon emission computed tomography) imaging in inverting the attenuated Radon transform. Novikov reported an explicit parallel-beam formula for the inversion of the attenuated Radon transform in 2000. Thereafter, a formula for fan-beam geometry was reported by Bukhgeim and Kazantsev (2002 Preprint N. 99 Sobolev Institute of Mathematics). At the same time, we presented a formula for varying focal-length fan-beam geometry. Sometimes, the reconstruction formula is so implicit that we cannot obtain the explicit reconstruction formula in the non-parallel geometries. In this work, we propose a unified reconstruction framework for extending parallel-beam geometry to any non-parallel geometry using ray-driven techniques. Studies by computer simulations demonstrated the accuracy of the presented unified reconstruction framework for extending parallel-beam to non-parallel geometries in inverting the attenuated Radon transform.

Iterative reconstruction with attenuation compensation from cone-beam projections acquired via nonplanar orbits

International Nuclear Information System (INIS)

Zeng, G.L.; Weng, Y.; Gullberg, G.T.

1997-01-01

Single photon emission computed tomography (SPECT) imaging with cone-beam collimators provides improved sensitivity and spatial resolution for imaging small objects with large field-of-view detectors. It is known that Tuy's cone-beam data sufficiency condition must be met to obtain artifact-free reconstructions. Even though Tuy's condition was derived for an attenuation-free situation, the authors hypothesize that an artifact-free reconstruction can be obtained even if the cone-beam data are attenuated, provided the imaging orbit satisfies Tuy's condition and the exact attenuation map is known. In the authors' studies, emission data are acquired using nonplanar circle-and-line orbits to acquire cone-beam data for tomographic reconstructions. An extended iterative ML-EM (maximum likelihood-expectation maximization) reconstruction algorithm is derived and used to reconstruct projection data with either a pre-acquired or assumed attenuation map. Quantitative accuracy of the attenuation corrected emission reconstruction is significantly improved

3D reconstruction and digitalization of an archeological site, Itanos, Crete

Directory of Open Access Journals (Sweden)

Rudy Ercek

2010-04-01

Full Text Available The city of Itanos is situated in the North-East of Crete. Between 1994 and 2005, the French School of Archaeology at Athens (Efa and the Center for Mediterranean Studies in Rethymnon carried out excavation campaigns during which a necropolis and an Archaic building have been explored by a team of the CReA. A very close collaboration between archeologists, engineers and computer graphic designers allowed the 3D reconstruction of these remains. The archeologist was able to directly verify his hypotheses during the reconstruction process. In summer 2007 and 2008, a 3D digitalization of Itanos was made in order to insert the 3D reconstructions into the actual landscape.

Utilizing Advanced Psychometric Methods in Research on Trait Expression across Situations

DEFF Research Database (Denmark)

Lang, Jonas W. B.; Tackett, Jennifer; Zettler, Ingo

2017-01-01

Lievens emphasized the extent to which new measurement tools and additional statistics can be used to advance research on trait expression across situations. We suggest that advanced psychometric models represent additional important and complementary building blocks for progress and new insights...... in research on trait expression across situations. Here, we offer two specific examples of this: (1) Item Response Theory modelling of within-person variability simultaneous with estimation of latent trait levels and (2) estimation of latent trait and latent situation factors from a multitrait...

Development of acoustic model-based iterative reconstruction technique for thick-concrete imaging

Science.gov (United States)

Almansouri, Hani; Clayton, Dwight; Kisner, Roger; Polsky, Yarom; Bouman, Charles; Santos-Villalobos, Hector

2016-02-01

Ultrasound signals have been used extensively for non-destructive evaluation (NDE). However, typical reconstruction techniques, such as the synthetic aperture focusing technique (SAFT), are limited to quasi-homogenous thin media. New ultrasonic systems and reconstruction algorithms are in need for one-sided NDE of non-homogenous thick objects. An application example space is imaging of reinforced concrete structures for commercial nuclear power plants (NPPs). These structures provide important foundation, support, shielding, and containment functions. Identification and management of aging and degradation of concrete structures is fundamental to the proposed long-term operation of NPPs. Another example is geothermal and oil/gas production wells. These multi-layered structures are composed of steel, cement, and several types of soil and rocks. Ultrasound systems with greater penetration range and image quality will allow for better monitoring of the well's health and prediction of high-pressure hydraulic fracturing of the rock. These application challenges need to be addressed with an integrated imaging approach, where the application, hardware, and reconstruction software are highly integrated and optimized. Therefore, we are developing an ultrasonic system with Model-Based Iterative Reconstruction (MBIR) as the image reconstruction backbone. As the first implementation of MBIR for ultrasonic signals, this paper document the first implementation of the algorithm and show reconstruction results for synthetically generated data.1

Development of Acoustic Model-Based Iterative Reconstruction Technique for Thick-Concrete Imaging

Energy Technology Data Exchange (ETDEWEB)

Almansouri, Hani [Purdue University; Clayton, Dwight A [ORNL; Kisner, Roger A [ORNL; Polsky, Yarom [ORNL; Bouman, Charlie [Purdue University; Santos-Villalobos, Hector J [ORNL

2016-01-01

Ultrasound signals have been used extensively for non-destructive evaluation (NDE). However, typical reconstruction techniques, such as the synthetic aperture focusing technique (SAFT), are limited to quasi-homogenous thin media. New ultrasonic systems and reconstruction algorithms are in need for one-sided NDE of non-homogenous thick objects. An application example space is imaging of reinforced concrete structures for commercial nuclear power plants (NPPs). These structures provide important foundation, support, shielding, and containment functions. Identification and management of aging and degradation of concrete structures is fundamental to the proposed long-term operation of NPPs. Another example is geothermal and oil/gas production wells. These multi-layered structures are composed of steel, cement, and several types of soil and rocks. Ultrasound systems with greater penetration range and image quality will allow for better monitoring of the well's health and prediction of high-pressure hydraulic fracturing of the rock. These application challenges need to be addressed with an integrated imaging approach, where the application, hardware, and reconstruction software are highly integrated and optimized. Therefore, we are developing an ultrasonic system with Model-Based Iterative Reconstruction (MBIR) as the image reconstruction backbone. As the first implementation of MBIR for ultrasonic signals, this paper document the first implementation of the algorithm and show reconstruction results for synthetically generated data.

Development of Acoustic Model-Based Iterative Reconstruction Technique for Thick-Concrete Imaging

Energy Technology Data Exchange (ETDEWEB)

Almansouri, Hani [Purdue University; Clayton, Dwight A [ORNL; Kisner, Roger A [ORNL; Polsky, Yarom [ORNL; Bouman, Charlie [Purdue University; Santos-Villalobos, Hector J [ORNL

2015-01-01

Ultrasound signals have been used extensively for non-destructive evaluation (NDE). However, typical reconstruction techniques, such as the synthetic aperture focusing technique (SAFT), are limited to quasi-homogenous thin media. New ultrasonic systems and reconstruction algorithms are in need for one-sided NDE of non-homogenous thick objects. An application example space is imaging of reinforced concrete structures for commercial nuclear power plants (NPPs). These structures provide important foundation, support, shielding, and containment functions. Identification and management of aging and degradation of concrete structures is fundamental to the proposed long-term operation of NPPs. Another example is geothermal and oil/gas production wells. These multi-layered structures are composed of steel, cement, and several types of soil and rocks. Ultrasound systems with greater penetration range and image quality will allow for better monitoring of the well s health and prediction of high-pressure hydraulic fracturing of the rock. These application challenges need to be addressed with an integrated imaging approach, where the application, hardware, and reconstruction software are highly integrated and optimized. Therefore, we are developing an ultrasonic system with Model-Based Iterative Reconstruction (MBIR) as the image reconstruction backbone. As the first implementation of MBIR for ultrasonic signals, this paper document the first implementation of the algorithm and show reconstruction results for synthetically generated data.

Study on a cellmap for the reconstruction of cosmic ray tracks in drift chamber

International Nuclear Information System (INIS)

Lei Yu; Ma Yuqian

2005-01-01

Taking 13 Cosmic experiment (L3+C) as an example, the authors discussed a new Cellmap to reconstruct the hit in drift chamber of magnetic spectrometer for the very inclined comic-ray tracks, and compared the reconstruction results with the standard Cellmap of L3+C. It shows that, for the very inclined cosmic-ray tracks, the new Cellmap can reconstruct more hits than the standard Cellmap, and the distribution of χ 2 of track reconstruction is also improved. (authors)

Errors and Uncertainties in Dose Reconstruction for Radiation Effects Research

Energy Technology Data Exchange (ETDEWEB)

Strom, Daniel J.

2008-04-14

Dose reconstruction for studies of the health effects of ionizing radiation have been carried out for many decades. Major studies have included Japanese bomb survivors, atomic veterans, downwinders of the Nevada Test Site and Hanford, underground uranium miners, and populations of nuclear workers. For such studies to be credible, significant effort must be put into applying the best science to reconstructing unbiased absorbed doses to tissues and organs as a function of time. In many cases, more and more sophisticated dose reconstruction methods have been developed as studies progressed. For the example of the Japanese bomb survivors, the dose surrogate “distance from the hypocenter” was replaced by slant range, and then by TD65 doses, DS86 doses, and more recently DS02 doses. Over the years, it has become increasingly clear that an equal level of effort must be expended on the quantitative assessment of uncertainty in such doses, and to reducing and managing uncertainty. In this context, this paper reviews difficulties in terminology, explores the nature of Berkson and classical uncertainties in dose reconstruction through examples, and proposes a path forward for Joint Coordinating Committee for Radiation Effects Research (JCCRER) Project 2.4 that requires a reasonably small level of effort for DOSES-2008.

Situation awareness and workload in complex tactical environments

NARCIS (Netherlands)

Veltman, J.A.

1999-01-01

The paper provides an example of a method to get insight into workload changes over time, executed tasks and situation awareness (SA) in complex task environments. The method is applied to measure the workload of a helicopter crew. The method has three components: 1) task analysis, 2) video

An innovative seeding technique for photon conversion reconstruction at CMS

International Nuclear Information System (INIS)

Giordano, D; Sguazzoni, G

2012-01-01

The conversion of photons into electron-positron pairs in the detector material is a nuisance in the event reconstruction of high energy physics experiments, since the measurement of the electromagnetic component of interaction products results degraded. Nonetheless this unavoidable detector effect can also be extremely useful. The reconstruction of photon conversions can be used to probe the detector material and to accurately measure soft photons that come from radiative decays in heavy flavor physics. In fact a converted photon can be measured with very high momentum resolution by exploiting the excellent reconstruction of charged tracks of a tracking detector as the one of CMS at LHC. The main issue is that photon conversion tracks are difficult to reconstruct for standard reconstruction algorithms. They are typically soft and very displaced from the primary interaction vertex. An innovative seeding technique that exploits the peculiar photon conversion topology, successfully applied in the CMS track reconstruction sequence, is presented. The performances of this technique and the substantial enhancement of photon conversion reconstruction efficiency are discussed. Application examples are given.

Simultaneous maximum a posteriori longitudinal PET image reconstruction

Science.gov (United States)

Ellis, Sam; Reader, Andrew J.

2017-09-01

Positron emission tomography (PET) is frequently used to monitor functional changes that occur over extended time scales, for example in longitudinal oncology PET protocols that include routine clinical follow-up scans to assess the efficacy of a course of treatment. In these contexts PET datasets are currently reconstructed into images using single-dataset reconstruction methods. Inspired by recently proposed joint PET-MR reconstruction methods, we propose to reconstruct longitudinal datasets simultaneously by using a joint penalty term in order to exploit the high degree of similarity between longitudinal images. We achieved this by penalising voxel-wise differences between pairs of longitudinal PET images in a one-step-late maximum a posteriori (MAP) fashion, resulting in the MAP simultaneous longitudinal reconstruction (SLR) method. The proposed method reduced reconstruction errors and visually improved images relative to standard maximum likelihood expectation-maximisation (ML-EM) in simulated 2D longitudinal brain tumour scans. In reconstructions of split real 3D data with inserted simulated tumours, noise across images reconstructed with MAP-SLR was reduced to levels equivalent to doubling the number of detected counts when using ML-EM. Furthermore, quantification of tumour activities was largely preserved over a variety of longitudinal tumour changes, including changes in size and activity, with larger changes inducing larger biases relative to standard ML-EM reconstructions. Similar improvements were observed for a range of counts levels, demonstrating the robustness of the method when used with a single penalty strength. The results suggest that longitudinal regularisation is a simple but effective method of improving reconstructed PET images without using resolution degrading priors.

Statistical reconstruction for cosmic ray muon tomography.

Science.gov (United States)

Schultz, Larry J; Blanpied, Gary S; Borozdin, Konstantin N; Fraser, Andrew M; Hengartner, Nicolas W; Klimenko, Alexei V; Morris, Christopher L; Orum, Chris; Sossong, Michael J

2007-08-01

Highly penetrating cosmic ray muons constantly shower the earth at a rate of about 1 muon per cm2 per minute. We have developed a technique which exploits the multiple Coulomb scattering of these particles to perform nondestructive inspection without the use of artificial radiation. In prior work [1]-[3], we have described heuristic methods for processing muon data to create reconstructed images. In this paper, we present a maximum likelihood/expectation maximization tomographic reconstruction algorithm designed for the technique. This algorithm borrows much from techniques used in medical imaging, particularly emission tomography, but the statistics of muon scattering dictates differences. We describe the statistical model for multiple scattering, derive the reconstruction algorithm, and present simulated examples. We also propose methods to improve the robustness of the algorithm to experimental errors and events departing from the statistical model.

Calibration-free quantitative surface topography reconstruction in scanning electron microscopy

International Nuclear Information System (INIS)

Faber, E.T.; Martinez-Martinez, D.; Mansilla, C.; Ocelík, V.; Hosson, J.Th.M. De

2015-01-01

This work presents a new approach to obtain reliable surface topography reconstructions from 2D Scanning Electron Microscopy (SEM) images. In this method a set of images taken at different tilt angles are compared by means of digital image correlation (DIC). It is argued that the strength of the method lies in the fact that precise knowledge about the nature of the rotation (vector and/or magnitude) is not needed. Therefore, the great advantage is that complex calibrations of the measuring equipment are avoided. The paper presents the necessary equations involved in the methods, including derivations and solutions. The method is illustrated with examples of 3D reconstructions followed by a discussion on the relevant experimental parameters. - Highlights: • A novel method for quantitative 3D surface reconstruction in SEM is described. • This method uses at least 3 SEM images acquired at different sample tilts. • This method does not need calibration from the movement of the sample holder. • Mathematical background and examples of application are presented

Soft Tissue Coverage of the Hand and Upper Extremity: The Reconstructive Elevator.

Science.gov (United States)

Miller, Erin Anne; Friedrich, Jeffrey

2016-07-01

Soft tissue reconstruction of the upper extremity is a complex topic because every defect has multiple potential solutions. Whereas the often-cited reconstructive ladder advised selection of the simplest reconstruction of the defect, the newer concept of the reconstructive elevator allows freedom to choose a more complex reconstruction to account for specialized function and aesthetic outcome. An algorithm for assessment of the defect is presented and demonstrated in this review, using 6 case examples to highlight key concepts. Representative flaps are presented and a discussion of functional and aesthetic outcomes is undertaken to provide a framework for achieving the patient's and surgeon's goals of reconstruction. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Cost sharing in production situations and network exploitation

NARCIS (Netherlands)

Koster, M.A.L.

1999-01-01

In many real-life situations where individuals work together in a joint project, joint costs (or profits) occur which have to be shared. The central problem of cost sharing is the allocation of costs in a 'just' way among the participants. Examples are numerous and range from setting fees for the

First results of genetic algorithm application in ML image reconstruction in emission tomography

International Nuclear Information System (INIS)

Smolik, W.

1999-01-01

This paper concerns application of genetic algorithm in maximum likelihood image reconstruction in emission tomography. The example of genetic algorithm for image reconstruction is presented. The genetic algorithm was based on the typical genetic scheme modified due to the nature of solved problem. The convergence of algorithm was examined. The different adaption functions, selection and crossover methods were verified. The algorithm was tested on simulated SPECT data. The obtained results of image reconstruction are discussed. (author)

Emotional Intelligence Relates to Well-Being: Evidence from the Situational Judgment Test of Emotional Management.

Science.gov (United States)

Burrus, Jeremy; Betancourt, Anthony; Holtzman, Steven; Minsky, Jennifer; MacCann, Carolyn; Roberts, Richard D

2012-07-01

This research was conducted to examine whether people high in emotional intelligence (EI) have greater well-being than people low in EI. The Situational Test of Emotion Management, Scales of Psychological Well-being, and Day Reconstruction Method were completed by 131 college students. Responses to the Situational Test of Emotion Management were strongly related to eudaimonic well-being as measured by responses on the Scales of Psychological Well-being (r=.54). Furthermore, the ability to manage emotions was related to hedonic well-being, correlating with both the frequency of experienced positive affect and the frequency of experienced negative affect, as measured by the Day Reconstruction Method. Two aspects of these results suggest a relationship between EI and well-being. First, the observed relationship between ability EI and psychological well-being is the largest reported in the literature to date. Second, this study is the first use of the Day Reconstruction Method to examine the relationship between well-being and EI. Results are discussed in terms of the potential for training emotion management to enhance well-being. Methodological advances for future research are also suggested. © 2012 The Authors. Applied Psychology: Health and Well-Being © 2012 The International Association of Applied Psychology.

Church, mission and reconstruction: Being a church with integrity in reconstruction discourse in post-colonial Zimbabwe

Directory of Open Access Journals (Sweden)

Canon B. Shambare

2018-05-01

Full Text Available The church in Africa, like its counterparts elsewhere in the world, is called to fulfil the mission of God as expressed in the call ‘Missio Dei’ and influentially remains with the integrity of the mission of Christ (Missio Christos, which is liberative and practical. For Christ was not only concerned with the spiritual needs of the people, but also with their material well-being. The following question therefore arises: how can the church in Africa, in general, and in Zimbabwe, in particular, actively do God’s mission and remain with integrity in the midst of the reality of suffering. Furthermore, how can the church for mission and reconstruction be understood in a post-colonial Zimbabwe given the contextual realities of political crises, corruption, poverty, moral decadence, defined or censored truth, leadership crises and no freedom of expression? This article argues that, although the church is faced with these arduous realities, it remains called by God to do God’s mission. While in post-colonial Zimbabwe the socio-political, socio-economic and socio-religious situation might seem hopeless, the church has remained vibrant and alive for reconstruction theology. The transformation of society is possible given the authority and mission mandate of the church. This article argues that the church is a key player in reconstruction theology and in the transformation of society. For transformation to be possible, the church should witness to the gospel of Christ without fear of being labelled, castrated and persecuted. The article asserts that the spirit of the Bible should be revived in a time of reconstruction in Zimbabwe. The assumption in this article is that Zimbabwe is ready for reconstruction discourse. For this to happen, the researchers argue that the church as a critical relevant player in reconstruction needs to ‘be church’ in its missional mandates. Integrity is essential if a church wants to be relevantly missional and

A two-step Hilbert transform method for 2D image reconstruction

International Nuclear Information System (INIS)

Noo, Frederic; Clackdoyle, Rolf; Pack, Jed D

2004-01-01

The paper describes a new accurate two-dimensional (2D) image reconstruction method consisting of two steps. In the first step, the backprojected image is formed after taking the derivative of the parallel projection data. In the second step, a Hilbert filtering is applied along certain lines in the differentiated backprojection (DBP) image. Formulae for performing the DBP step in fan-beam geometry are also presented. The advantage of this two-step Hilbert transform approach is that in certain situations, regions of interest (ROIs) can be reconstructed from truncated projection data. Simulation results are presented that illustrate very similar reconstructed image quality using the new method compared to standard filtered backprojection, and that show the capability to correctly handle truncated projections. In particular, a simulation is presented of a wide patient whose projections are truncated laterally yet for which highly accurate ROI reconstruction is obtained

Personality-situation transactions from adolescence to old age.

Science.gov (United States)

Wrzus, Cornelia; Wagner, Gert G; Riediger, Michaela

2016-05-01

People presumably choose and create their daily environments according to their personality. Prior research shows that, for example, more extraverted people engage more often in social situations, and more conscientious people engage more often in work-related activities compared with less extraverted or less conscientious people, respectively. The current study examined such personality-situation transactions in people's daily life. Based on the assumption that older people know themselves and their personality better than younger people, we investigated whether momentary and proximate personality-situation associations (i.e., changing from 1 type of situation into another) increase with older age. Three-hundred and 78 people aged 14 to 82 years described their Big Five traits and took part in a 3-week experience-sampling phase. Using mobile-phone based assessments in daily life, participants reported on average 55 times on their momentary situation. Multilevel modeling results showed that personality-situation associations varied with the age of participants. Some of the "established" personality-situation associations, such as for extraversion and time spent with friends or conscientiousness and time spent with work activities, were only observed in adolescence and young adulthood. In contrast, other personality-situation associations appeared only in late adulthood, such as for openness and time spent with friends. Yet most personality-situation associations did not vary significantly with people's age. In addition, personality traits predicted maintaining or entering personality-congruent situations. The latter results point to the active role of personality in shaping one's environment. The findings imply that some personality-situation transactions may be largely similarly across the life span. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Fast implementations of 3D PET reconstruction using vector and parallel programming techniques

International Nuclear Information System (INIS)

Guerrero, T.M.; Cherry, S.R.; Dahlbom, M.; Ricci, A.R.; Hoffman, E.J.

1993-01-01

Computationally intensive techniques that offer potential clinical use have arisen in nuclear medicine. Examples include iterative reconstruction, 3D PET data acquisition and reconstruction, and 3D image volume manipulation including image registration. One obstacle in achieving clinical acceptance of these techniques is the computational time required. This study focuses on methods to reduce the computation time for 3D PET reconstruction through the use of fast computer hardware, vector and parallel programming techniques, and algorithm optimization. The strengths and weaknesses of i860 microprocessor based workstation accelerator boards are investigated in implementations of 3D PET reconstruction

Inference-Based Surface Reconstruction of Cluttered Environments

KAUST Repository

Biggers, K.

2012-08-01

We present an inference-based surface reconstruction algorithm that is capable of identifying objects of interest among a cluttered scene, and reconstructing solid model representations even in the presence of occluded surfaces. Our proposed approach incorporates a predictive modeling framework that uses a set of user-provided models for prior knowledge, and applies this knowledge to the iterative identification and construction process. Our approach uses a local to global construction process guided by rules for fitting high-quality surface patches obtained from these prior models. We demonstrate the application of this algorithm on several example data sets containing heavy clutter and occlusion. © 2012 IEEE.

Initial and regime situations in the decay of unstable quantum systems

International Nuclear Information System (INIS)

Rimini, A.; Zambotti, G.

1980-01-01

Two different definitions of survival probability in the decay of an unstable quantum system are considered and the equations for them are deduced from the equation for the density operator. The regime situation for the ensemble of unstable systems is studied and the density operator in such a situation is derived. The possible definitions of lifetime are discussed. If the adopted definition makes reference to all time including the early ones, then it is compulsory to specify exactly the state at the initial time. The correct equations for the survival probabilities in such conditions are derived. Two typical examples of decay experiments are considered and the influence of the initial preparation on the mean life is discussed. Numerical examples are given. (author)

Conference Report: Quo Vadis Reconstructive Social Work Research? Traditions—State of the Art—Perspectives

Directory of Open Access Journals (Sweden)

Ulrike Loch

2008-01-01

Full Text Available This conference report gives an overview of the 3rd annual conference of the "Network for Reconstructive Research and Biography" held at the Alice-Salomon-University of Applied Science, Berlin, Germany, on 23rd and 24th March, 2007. The aim of this year's conference was to report on the state of the art of research on social work, the current research situations at various universities in Germany, and the discourse on reconstructive social work within the discipline. This was to serve as a basis for the planned next step regarding the further development of the Network, i.e. intensive exchange, promotion of networking with colleagues and concrete forms of co-operation and strategies designed to further consolidate reconstructive social work in the Federal Republic of Germany. The keynote speakers gave further particulars about the state of the art of social work research, the workshops explored this situation in the areas of international social work practice and research, the teaching of research, junior researchers, research funding and new bachelor and master degree programs in the reconstructive social work. Approximately 40 participants met and provided new trend-setting ideas for qualitative research in social work and for the work and structure of the Network. URN: urn:nbn:de:0114-fqs0801338

Fast dictionary-based reconstruction for diffusion spectrum imaging.

Science.gov (United States)

Bilgic, Berkin; Chatnuntawech, Itthi; Setsompop, Kawin; Cauley, Stephen F; Yendiki, Anastasia; Wald, Lawrence L; Adalsteinsson, Elfar

2013-11-01

Diffusion spectrum imaging reveals detailed local diffusion properties at the expense of substantially long imaging times. It is possible to accelerate acquisition by undersampling in q-space, followed by image reconstruction that exploits prior knowledge on the diffusion probability density functions (pdfs). Previously proposed methods impose this prior in the form of sparsity under wavelet and total variation transforms, or under adaptive dictionaries that are trained on example datasets to maximize the sparsity of the representation. These compressed sensing (CS) methods require full-brain processing times on the order of hours using MATLAB running on a workstation. This work presents two dictionary-based reconstruction techniques that use analytical solutions, and are two orders of magnitude faster than the previously proposed dictionary-based CS approach. The first method generates a dictionary from the training data using principal component analysis (PCA), and performs the reconstruction in the PCA space. The second proposed method applies reconstruction using pseudoinverse with Tikhonov regularization with respect to a dictionary. This dictionary can either be obtained using the K-SVD algorithm, or it can simply be the training dataset of pdfs without any training. All of the proposed methods achieve reconstruction times on the order of seconds per imaging slice, and have reconstruction quality comparable to that of dictionary-based CS algorithm.

The Theory about didactical situations used to analyze practice related teaching and learning

DEFF Research Database (Denmark)

Aarkrog, Vibe

2018-01-01

Based on research showing that the students’ challenges in practice based learning can be located to the transitions between theory and practice, this study focuses on how teachers support the students in these transitions. The theoretical framework is mainly Brousseau’s ‘Theory about didactical...... the results show that the Theory of didactical situations can be a useful framework accomplishing practice related teaching and learning. In the discussion a number of challenges in relation to practice related teaching is highlighted focusing on the relation between the five situations in the theory...... situations’ that defines five situations of practice related teaching. The data includes observations combined with interviews of teachers in relation to various examples of practice related teaching in the social and health care programs. Based on the analysis of three examples of practice related teaching...

Identify the Rotating Stall in Centrifugal Compressors by Fractal Dimension in Reconstructed Phase Space

Directory of Open Access Journals (Sweden)

Le Wang

2015-11-01

Full Text Available Based on phase space reconstruction and fractal dynamics in nonlinear dynamics, a method is proposed to extract and analyze the dynamics of the rotating stall in the impeller of centrifugal compressor, and some numerical examples are given to verify the results as well. First, the rotating stall of an existing low speed centrifugal compressor (LSCC is numerically simulated, and the time series of pressure in the rotating stall is obtained at various locations near the impeller outlet. Then, the phase space reconstruction is applied to these pressure time series, and a low-dimensional dynamical system, which the dynamics properties are included in, is reconstructed. In phase space reconstruction, C–C method is used to obtain the key parameters, such as time delay and the embedding dimension of the reconstructed phase space. Further, the fractal characteristics of the rotating stall are analyzed in detail, and the fractal dimensions are given for some examples to measure the complexity of the flow in the post-rotating stall. The results show that the fractal structures could reveal the intrinsic dynamics of the rotating stall flow and could be considered as a characteristic to identify the rotating stall.

Exact iterative reconstruction for the interior problem

International Nuclear Information System (INIS)

Zeng, Gengsheng L; Gullberg, Grant T

2009-01-01

There is a trend in single photon emission computed tomography (SPECT) that small and dedicated imaging systems are becoming popular. For example, many companies are developing small dedicated cardiac SPECT systems with different designs. These dedicated systems have a smaller field of view (FOV) than a full-size clinical system. Thus data truncation has become the norm rather than the exception in these systems. Therefore, it is important to develop region of interest (ROI) reconstruction algorithms using truncated data. This paper is a stepping stone toward this direction. This paper shows that the common generic iterative image reconstruction algorithms are able to exactly reconstruct the ROI under the conditions that the convex ROI is fully sampled and the image value in a sub-region within the ROI is known. If the ROI includes a sub-region that is outside the patient body, then the conditions can be easily satisfied.

New method for initial density reconstruction

Science.gov (United States)

Shi, Yanlong; Cautun, Marius; Li, Baojiu

2018-01-01

A theoretically interesting and practically important question in cosmology is the reconstruction of the initial density distribution provided a late-time density field. This is a long-standing question with a revived interest recently, especially in the context of optimally extracting the baryonic acoustic oscillation (BAO) signals from observed galaxy distributions. We present a new efficient method to carry out this reconstruction, which is based on numerical solutions to the nonlinear partial differential equation that governs the mapping between the initial Lagrangian and final Eulerian coordinates of particles in evolved density fields. This is motivated by numerical simulations of the quartic Galileon gravity model, which has similar equations that can be solved effectively by multigrid Gauss-Seidel relaxation. The method is based on mass conservation, and does not assume any specific cosmological model. Our test shows that it has a performance comparable to that of state-of-the-art algorithms that were very recently put forward in the literature, with the reconstructed density field over ˜80 % (50%) correlated with the initial condition at k ≲0.6 h /Mpc (1.0 h /Mpc ). With an example, we demonstrate that this method can significantly improve the accuracy of BAO reconstruction.

Assessment of prior image induced nonlocal means regularization for low-dose CT reconstruction: Change in anatomy.

Science.gov (United States)

Zhang, Hao; Ma, Jianhua; Wang, Jing; Moore, William; Liang, Zhengrong

2017-09-01

Repeated computed tomography (CT) scans are prescribed for some clinical applications such as lung nodule surveillance. Several studies have demonstrated that incorporating a high-quality prior image into the reconstruction of subsequent low-dose CT (LDCT) acquisitions can either improve image quality or reduce data fidelity requirements. Our proposed previous normal-dose image induced nonlocal means (ndiNLM) regularization method for LDCT is an example of such a method. However, one major concern with prior image based methods is that they might produce false information when the prior image and the current LDCT image show different structures (for example, if a lung nodule emerges, grows, shrinks, or disappears over time). This study aims to assess the performance of the ndiNLM regularization method in situations with change in anatomy. We incorporated the ndiNLM regularization into the statistical image reconstruction (SIR) framework for reconstruction of subsequent LDCT images. Because of its patch-based search mechanism, a rough registration between the prior image and the current LDCT image is adequate for the SIR-ndiNLM method. We assessed the performance of the SIR-ndiNLM method in lung nodule surveillance for two different scenarios: (a) the nodule was not found in a baseline exam but appears in a follow-up LDCT scan; (b) the nodule was present in a baseline exam but disappears in a follow-up LDCT scan. We further investigated the effect of nodule size on the performance of the SIR-ndiNLM method. We found that a relatively large search-window (e.g., 33 × 33) should be used for the SIR-ndiNLM method to account for misalignment between the prior image and the current LDCT image, and to ensure that enough similar patches can be found in the prior image. With proper selection of other parameters, experimental results with two patient datasets demonstrated that the SIR-ndiNLM method did not miss true nodules nor introduce false nodules in the lung nodule

General surface reconstruction for cone-beam multislice spiral computed tomography

International Nuclear Information System (INIS)

Chen Laigao; Liang Yun; Heuscher, Dominic J.

2003-01-01

A new family of cone-beam reconstruction algorithm, the General Surface Reconstruction (GSR), is proposed and formulated in this paper for multislice spiral computed tomography (CT) reconstructions. It provides a general framework to allow the reconstruction of planar or nonplanar surfaces on a set of rebinned short-scan parallel beam projection data. An iterative surface formation method is proposed as an example to show the possibility to form nonplanar reconstruction surfaces to minimize the adverse effect between the collected cone-beam projection data and the reconstruction surfaces. The improvement in accuracy of the nonplanar surfaces over planar surfaces in the two-dimensional approximate cone-beam reconstructions is mathematically proved and demonstrated using numerical simulations. The proposed GSR algorithm is evaluated by the computer simulation of cone-beam spiral scanning geometry and various mathematical phantoms. The results demonstrate that the GSR algorithm generates much better image quality compared to conventional multislice reconstruction algorithms. For a table speed up to 100 mm per rotation, GSR demonstrates good image quality for both the low-contrast ball phantom and thorax phantom. All other performance parameters are comparable to the single-slice 180 deg. LI (linear interpolation) algorithm, which is considered the 'gold standard'. GSR also achieves high computing efficiency and good temporal resolution, making it an attractive alternative for the reconstruction of next generation multislice spiral CT data

Model simulations and proxy-based reconstructions for the European region in the past millennium (Invited)

Science.gov (United States)

Zorita, E.

2009-12-01

One of the objectives when comparing simulations of past climates to proxy-based climate reconstructions is to asses the skill of climate models to simulate climate change. This comparison may accomplished at large spatial scales, for instance the evolution of simulated and reconstructed Northern Hemisphere annual temperature, or at regional or point scales. In both approaches a 'fair' comparison has to take into account different aspects that affect the inevitable uncertainties and biases in the simulations and in the reconstructions. These efforts face a trade-off: climate models are believed to be more skillful at large hemispheric scales, but climate reconstructions are these scales are burdened by the spatial distribution of available proxies and by methodological issues surrounding the statistical method used to translate the proxy information into large-spatial averages. Furthermore, the internal climatic noise at large hemispheric scales is low, so that the sampling uncertainty tends to be also low. On the other hand, the skill of climate models at regional scales is limited by the coarse spatial resolution, which hinders a faithful representation of aspects important for the regional climate. At small spatial scales, the reconstruction of past climate probably faces less methodological problems if information from different proxies is available. The internal climatic variability at regional scales is, however, high. In this contribution some examples of the different issues faced when comparing simulation and reconstructions at small spatial scales in the past millennium are discussed. These examples comprise reconstructions from dendrochronological data and from historical documentary data in Europe and climate simulations with global and regional models. These examples indicate that the centennial climate variations can offer a reasonable target to assess the skill of global climate models and of proxy-based reconstructions, even at small spatial scales

[Support psychotherapy in traumatic situations].

Science.gov (United States)

Pérez-Sales, Pau; Vázquez Valverde, Carmelo

2003-12-01

It seems that a certain consensus exists to speak about a traumatic situation as an experience which is made up of a threat on the physical or psychological integrity of a person and against which one responds with fear, desperation and intensive horror. Different psychological phenomena are involved with the manner through which a human being confronts his/her past. In particular, the response to traumatic situations, mourning, and blame share their characteristic of being an irreversible living reality related to facts, loss or past impacts and it is necessary to integrate these in one's life in order to advance; these comprise a triangle frequently coexisting and interconnected. Aid for these three situations has, therefore, as common elements, two premises: an active task is required by the person who suffers this situation; this person must, in some form, desire to move ahead. One can not toil in mourning, in a traumatic experience, or in a life of blame if these have a positive symbolic value for this person; for example, mourning as a manner not to treason the dead person by forgetting that person, the reliving a trauma as an attempt to provide some sense to the actions which occurred, or blame as a desire to not forget an error or as a final punishment of this active task; the final objective of this active task is not usually to forget but to integrate in order to live. If a person does not perceive this clearly, this person may not become actively involved in the task to overcome a traumatic situation and to move ahead, nor will that person accept that a person who tries to help questions this person's realities or experiences.

Fast Dictionary-Based Reconstruction for Diffusion Spectrum Imaging

Science.gov (United States)

Bilgic, Berkin; Chatnuntawech, Itthi; Setsompop, Kawin; Cauley, Stephen F.; Yendiki, Anastasia; Wald, Lawrence L.; Adalsteinsson, Elfar

2015-01-01

Diffusion Spectrum Imaging (DSI) reveals detailed local diffusion properties at the expense of substantially long imaging times. It is possible to accelerate acquisition by undersampling in q-space, followed by image reconstruction that exploits prior knowledge on the diffusion probability density functions (pdfs). Previously proposed methods impose this prior in the form of sparsity under wavelet and total variation (TV) transforms, or under adaptive dictionaries that are trained on example datasets to maximize the sparsity of the representation. These compressed sensing (CS) methods require full-brain processing times on the order of hours using Matlab running on a workstation. This work presents two dictionary-based reconstruction techniques that use analytical solutions, and are two orders of magnitude faster than the previously proposed dictionary-based CS approach. The first method generates a dictionary from the training data using Principal Component Analysis (PCA), and performs the reconstruction in the PCA space. The second proposed method applies reconstruction using pseudoinverse with Tikhonov regularization with respect to a dictionary. This dictionary can either be obtained using the K-SVD algorithm, or it can simply be the training dataset of pdfs without any training. All of the proposed methods achieve reconstruction times on the order of seconds per imaging slice, and have reconstruction quality comparable to that of dictionary-based CS algorithm. PMID:23846466

A robust state-space kinetics-guided framework for dynamic PET image reconstruction

International Nuclear Information System (INIS)

Tong, S; Alessio, A M; Kinahan, P E; Liu, H; Shi, P

2011-01-01

Dynamic PET image reconstruction is a challenging issue due to the low SNR and the large quantity of spatio-temporal data. We propose a robust state-space image reconstruction (SSIR) framework for activity reconstruction in dynamic PET. Unlike statistically-based frame-by-frame methods, tracer kinetic modeling is incorporated to provide physiological guidance for the reconstruction, harnessing the temporal information of the dynamic data. Dynamic reconstruction is formulated in a state-space representation, where a compartmental model describes the kinetic processes in a continuous-time system equation, and the imaging data are expressed in a discrete measurement equation. Tracer activity concentrations are treated as the state variables, and are estimated from the dynamic data. Sampled-data H ∞ filtering is adopted for robust estimation. H ∞ filtering makes no assumptions on the system and measurement statistics, and guarantees bounded estimation error for finite-energy disturbances, leading to robust performance for dynamic data with low SNR and/or errors. This alternative reconstruction approach could help us to deal with unpredictable situations in imaging (e.g. data corruption from failed detector blocks) or inaccurate noise models. Experiments on synthetic phantom and patient PET data are performed to demonstrate feasibility of the SSIR framework, and to explore its potential advantages over frame-by-frame statistical reconstruction approaches.

Paleoenvironmental inference models from sediment diatom assemblages in Baffin Island lakes (Nunavut, Canada) and reconstruction of summer water temperature

Energy Technology Data Exchange (ETDEWEB)

Joynt, E. H. III; Wolfe, A. P. [Colorado Univ., Inst. of Arctic and Alpine Research, Boulder, CO (United States)

2001-06-01

Lake sediments are attractive repositories for paleoclimate proxy data because they are temporally continuous, undisturbed and datable. It is particularly true of lakes which are ubiquitous throughout the Arctic regions, enabling dense spatial coverage of sampling sites. In more recent times diatoms have been applied to a a variety of paleoenvironmental questions. However, these studies have been of limited usefulness because they lack a regional training set that would facilitate making quantitative paleoenvironmental inferences. This article provides this inferential tool, together with an example of its application. Conductivity, pH, summer lake water temperature, and mean annual air temperature have been identified as the significant controls over diatom assemblages from the surface sediments of 61 lakes on Baffin Island. Using weighted-averaging regression and calibration, predictive models for these parameters have been developed. Results show that the summer lake water temperature model provides realistic reconstructions when compared with other paleoenvironmental records. Over the past 5000 years the amplitude of reconstructed summer lake water temperature was found to be on the order of 4 degrees C, expressed primarily as progressive neoglacial cooling culminating in the Little Ice Age. Diatom-inferred summer water temperatures have increased by about 2 degrees C in the past 150 years, which is also in agreement with independent paleoclimatic reconstructions. The data obtained in this study complements similar efforts from the western Canadian Arctic and the northern reaches of Scandinavia, however, this is the first training set developed for lakes situated entirely north of the tree line. As such, it extends the applicability of diatoms for paleotemperature reconstructions well into the Arctic tundra biome. 45 refs., 1 tab., 10 figs., 1 appendix.

Use of contaminated well water, example reference biospheres 1 and 2A

International Nuclear Information System (INIS)

Santucci, P.; Kontic, B.; Coughtrey, P.; McKenney, C.; Smith, G.

2005-01-01

The BIOMASS programme's Theme 1 evaluated a number of scenarios, which assisted in the development of practical guidance. A total of four Example Reference Biospheres were fully developed, with the assumptions, data, and models thoroughly documented. These Examples display both the practicality and the transparency available through the use of the Reference Biosphere Methodology. While the methodology is designed to promote transparency and traceability, proper documentation and justification is still the responsibility of the user. The Examples can also be used as generic analyses in some situations. Although it is anticipated that each of the Reference Biospheres explored within BIOMASS Theme 1 should be a useful practical example, the quantitative results of the model calculations are not intended to be understood as prescribed biosphere 'conversion factors'. In choosing to implement an Example, careful consideration would need to be given to their relevance (including associated data) to the particular assessment context at hand. In general, the more complex the model is, the more limited applicability it has for generic purposes. For example, ERB1A (direct use of well water for drinking) can be used straightforwardly, with minor or no adjustments, at a number of generic sites. Example 2A, however, for which climatic conditions and agricultural practices need to be specified, would need to be implemented for each specific situation

Rehabilitation and reconstruction of Islamic Architectural Heritage in China: the example of the Ningxia Hui Autonomous Region

Directory of Open Access Journals (Sweden)

Huang Lijun

2015-06-01

Full Text Available The Ningxia Hui Autonomous Region, located in Northwestern China, has the highest concentration of Hui Muslims in China: around 34% of the local population is Hui Muslim. Following the anti-religious campaigns of the communist regime and the wide destruction of the Cultural Revolution, Hui Muslims began gradually to reclaim their Muslim heritage in the late 70's. A major aspect of the rediscovery of their Islamic heritage was the Rehabilitation and reconstruction of Islamic Architectural buildings. As of today, Ningxia counts 4,500 mosques and other religious buildings. The present article seeks to introduce the architectural tendencies at play in this reconstruction, specifically the role of competing Arabic and Chinese influences.

SYRMEP Tomo Project: a graphical user interface for customizing CT reconstruction workflows.

Science.gov (United States)

Brun, Francesco; Massimi, Lorenzo; Fratini, Michela; Dreossi, Diego; Billé, Fulvio; Accardo, Agostino; Pugliese, Roberto; Cedola, Alessia

2017-01-01

When considering the acquisition of experimental synchrotron radiation (SR) X-ray CT data, the reconstruction workflow cannot be limited to the essential computational steps of flat fielding and filtered back projection (FBP). More refined image processing is often required, usually to compensate artifacts and enhance the quality of the reconstructed images. In principle, it would be desirable to optimize the reconstruction workflow at the facility during the experiment (beamtime). However, several practical factors affect the image reconstruction part of the experiment and users are likely to conclude the beamtime with sub-optimal reconstructed images. Through an example of application, this article presents SYRMEP Tomo Project (STP), an open-source software tool conceived to let users design custom CT reconstruction workflows. STP has been designed for post-beamtime (off-line use) and for a new reconstruction of past archived data at user's home institution where simple computing resources are available. Releases of the software can be downloaded at the Elettra Scientific Computing group GitHub repository https://github.com/ElettraSciComp/STP-Gui.

Cultural reconstruction and experimental exploration for peace in ...

African Journals Online (AJOL)

Cultural reconstruction and experimental exploration for peace in Olu Obafemi's Dark times are over? ... The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, ...

Electron and photon reconstruction and performance in ATLAS using a dynamical, topological cell clustering-based approach

CERN Document Server

The ATLAS collaboration

2017-01-01

The electron and photon reconstruction in ATLAS has moved towards the use of a dynamical, topo- logical cell-based approach for cluster building, owing to advancements in the calibration procedure which allow for such a method to be applied. The move to this new technique allows for improved measurements of electron and photon energies, particularly in situations where an electron radiates a bremsstrahlung photon, or a photon converts to an electron-poistron pair. This note details the changes to the ATLAS electron and photon reconstruction software, and assesses its performance under current LHC luminosity conditions using simulated data. Changes to the converted photon reconstruction are also detailed, which improve the reconstruction efficiency of double-track converted photons, as well as reducing the reconstruction of spurious one-track converted photons. The performance of the new reconstruction algorithm is also presented in a number of important topologies relevant to precision Standard Model physics,...

Collective cognition in humans: groups outperform their best members in a sentence reconstruction task.

Directory of Open Access Journals (Sweden)

Romain J G Clément

Full Text Available Group-living is widespread among animals and one of the major advantages of group-living is the ability of groups to solve cognitive problems that exceed individual ability. Humans also make use of collective cognition and have simultaneously developed a highly complex language to exchange information. Here we investigated collective cognition of human groups regarding language use in a realistic situation. Individuals listened to a public announcement and had to reconstruct the sentence alone or in groups. This situation is often encountered by humans, for instance at train stations or airports. Using recent developments in machine speech recognition, we analysed how well individuals and groups reconstructed the sentences from a syntactic (i.e., the number of errors and semantic (i.e., the quality of the retrieved information perspective. We show that groups perform better both on a syntactic and semantic level than even their best members. Groups made fewer errors and were able to retrieve more information when reconstructing the sentences, outcompeting even their best group members. Our study takes collective cognition studies to the more complex level of language use in humans.

Signal process and profile reconstruction of stress corrosion crack by eddy current test

International Nuclear Information System (INIS)

Zhang Siquan; Chen Tiequn; Liu Guixiong

2008-01-01

The reconstruction of crack profiles is very important in the NDE (nondestructive evaluation) of critical structures, such as pressure vessel and tubes in heat exchangers. First a wavelet transform signal processing technique is used to reduce noise and other non-defect signals from the signals of crack, and then based on an artificial neural network method, the crack profiles are reconstructed. Although the results reveal that this method is with many advantages such as a short CPU time and precision for reconstruction,it does have some drawbacks, for example, the database generation and network training is a much time consuming work. Moreover, this approach does not expressly reconstruct the distribution of conductivity inside a crack, so the reliability of a reconstructed crack shape is unknown. But in practical application, if we do not consider the multiple cracks, this method can be used to reconstruct the natural crack. (authors)

A faster ordered-subset convex algorithm for iterative reconstruction in a rotation-free micro-CT system

International Nuclear Information System (INIS)

Quan, E; Lalush, D S

2009-01-01

We present a faster iterative reconstruction algorithm based on the ordered-subset convex (OSC) algorithm for transmission CT. The OSC algorithm was modified such that it calculates the normalization term before the iterative process in order to save computational cost. The modified version requires only one backprojection per iteration as compared to two required for the original OSC. We applied the modified OSC (MOSC) algorithm to a rotation-free micro-CT system that we proposed previously, observed its performance, and compared with the OSC algorithm for 3D cone-beam reconstruction. Measurements on the reconstructed images as well as the point spread functions show that MOSC is quite similar to OSC; in noise-resolution trade-off, MOSC is comparable with OSC in a regular-noise situation and it is slightly worse than OSC in an extremely high-noise situation. The timing record shows that MOSC saves 25-30% CPU time, depending on the number of iterations used. We conclude that the MOSC algorithm is more efficient than OSC and provides comparable images.

Enhancing temporal correlations in EOF expansions for the reconstruction of missing data using DINEOF

Directory of Open Access Journals (Sweden)

A. Alvera-Azcárate

2009-10-01

Full Text Available DINEOF (Data Interpolating Empirical Orthogonal Functions is an EOF-based technique for the reconstruction of missing data in geophysical fields, such as those produced by clouds in sea surface temperature satellite images. A technique to reduce spurious time variability in DINEOF reconstructions is presented. The reconstruction of these images within a long time series using DINEOF can lead to large discontinuities in the reconstruction. Filtering the temporal covariance matrix allows to reduce this spurious variability and therefore more realistic reconstructions are obtained. The approach is tested in a three years sea surface temperature data set over the Black Sea. The effect of the filter in the temporal EOFs is presented, as well as some examples of the improvement achieved with the filtering in the SST reconstruction, both compared to the DINEOF approach without filtering.

Engaging design materials, formats and Framings in specific, situated co-designing

DEFF Research Database (Denmark)

Agger Eriksen, Mette

Engaging co-designers in specific situations of co- designing often also means engaging tangible working materials. However, it can be challenging, so rather than seeing it as applying design methods, the paper propose applying what I call a micro-material perspective. The practical concept captu......-design situations" clustered in three quite well- known types of co-design situations framed for; Exploring Current Use(r) Practices, Mapping Networks and Co-Designing (Possible) Futures.......Engaging co-designers in specific situations of co- designing often also means engaging tangible working materials. However, it can be challenging, so rather than seeing it as applying design methods, the paper propose applying what I call a micro-material perspective. The practical concept...... captures both paying attention to the physical design materials, the formats of their exploration and the framings of focus when understanding and planning such specific co-design situations. To exemplify applying the perspective, the paper describes and discusses six specific examples of "co...

Reconstructing Climate Change: The Model-Data Ping-Pong

Science.gov (United States)

Stocker, T. F.

2017-12-01

When Cesare Emiliani, the father of paleoceanography, made the first attempts at a quantitative reconstruction of Pleistocene climate change in the early 1950s, climate models were not yet conceived. The understanding of paleoceanographic records was therefore limited, and scientists had to resort to plausibility arguments to interpret their data. With the advent of coupled climate models in the early 1970s, for the first time hypotheses about climate processes and climate change could be tested in a dynamically consistent framework. However, only a model hierarchy can cope with the long time scales and the multi-component physical-biogeochemical Earth System. There are many examples how climate models have inspired the interpretation of paleoclimate data on the one hand, and conversely, how data have questioned long-held concepts and models. In this lecture I critically revisit a few examples of this model-data ping-pong, such as the bipolar seesaw, the mid-Holocene greenhouse gas increase, millennial and rapid CO2 changes reconstructed from polar ice cores, and the interpretation of novel paleoceanographic tracers. These examples also highlight many of the still unsolved questions and provide guidance for future research. The combination of high-resolution paleoceanographic data and modeling has never been more relevant than today. It will be the key for an appropriate risk assessment of impacts on the Earth System that are already underway in the Anthropocene.

Three-dimensional digital tomosynthesis iterative reconstruction, artifact reduction and alternative acquisition geometry

CERN Document Server

Levakhina, Yulia

2014-01-01

Yulia Levakhina gives an introduction to the major challenges of image reconstruction in Digital Tomosynthesis (DT), particularly to the connection of the reconstruction problem with the incompleteness of the DT dataset. The author discusses the factors which cause the formation of limited angle artifacts and proposes how to account for them in order to improve image quality and axial resolution of modern DT. The addressed methods include a weighted non-linear back projection scheme for algebraic reconstruction and?novel dual-axis acquisition geometry. All discussed algorithms and methods are supplemented by detailed illustrations, hints for practical implementation, pseudo-code, simulation results and real patient case examples.

Comparison Between Laser Scanning and Automated 3d Modelling Techniques to Reconstruct Complex and Extensive Cultural Heritage Areas

Science.gov (United States)

Fassi, F.; Fregonese, L.; Ackermann, S.; De Troia, V.

2013-02-01

In Cultural Heritage field, the necessity to survey objects in a fast manner, with the ability to repeat the measurements several times for deformation or degradation monitoring purposes, is increasing. In this paper, two significant cases, an architectonical one and an archaeological one, are presented. Due to different reasons and emergency situations, the finding of the optimal solution to enable quick and well-timed survey for a complete digital reconstruction of the object is required. In both cases, two survey methods have been tested and used: a laser scanning approach that allows to obtain high-resolution and complete scans within a short time and a photogrammetric one that allows the three-dimensional reconstruction of the object from images. In the last months, several methodologies, including free or low cost techniques, have arisen. These kinds of software allow the fully automatically three-dimensional reconstruction of objects from images, giving back a dense point cloud and, in some case, a surfaced mesh model. In this paper some comparisons between the two methodologies above mentioned are presented, using the example of some real cases of study. The surveys have been performed by employing both photogrammetry and laser scanner techniques. The methodological operational choices, depending on the required goal, the difficulties encountered during the survey with these methods, the execution time (that is the key parameter), and finally the obtained results, are fully described and examinated. On the final 3D model, an analytical comparison has been made, to analyse the differences, the tolerances, the possibility of accuracy improvement and the future developments.

Mandibular reconstruction with composite microvascular tissue transfer

International Nuclear Information System (INIS)

Coleman, J.J. III; Wooden, W.A.

1990-01-01

Microvascular free tissue transfer has provided a variety of methods of restoring vascularized bone and soft tissue to difficult defects created by tumor resection and trauma. Over 7 years, 26 patients have undergone 28 free flaps for mandibular reconstruction, 15 for primary squamous cell carcinoma of the floor of the mouth or tongue, 7 for recurrent tumor, and 6 for other reasons [lymphangioma (1), infection (1), gunshot wound (1), and osteoradionecrosis (3)]. Primary reconstruction was performed in 19 cases and secondary in 9. All repairs were composite flaps including 12 scapula, 5 radial forearm, 3 fibula, 2 serratus, and 6 deep circumflex iliac artery. Mandibular defects included the symphysis alone (7), symphysis and body (5), symphysis-body-ramus condyle (2), body or ramus (13), and bilateral body (1). Fourteen patients had received prior radiotherapy to adjuvant or curative doses. Eight received postoperative radiotherapy. All patients had initially successful vascularized reconstruction by clinical examination (28) and positive radionuclide scan (22 of 22). Bony stability was achieved in 25 of 26 patients and oral continence in 24 of 26. One complete flap loss occurred at 14 days. Complications of some degree developed in 22 patients including partial skin necrosis (3), orocutaneous fistula (3), plate exposure (1), donor site infection (3), fracture of reconstruction (1), and fracture of the radius (1). Microvascular transfer of bone and soft tissue allows a reliable reconstruction--despite previous radiotherapy, infection, foreign body, or surgery--in almost every situation in which mandible and soft tissue are absent. Bony union, a healed wound, and reasonable function and appearance are likely despite early fistula, skin loss, or metal plate or bone exposure

Mandibular reconstruction with composite microvascular tissue transfer

Energy Technology Data Exchange (ETDEWEB)

Coleman, J.J. III; Wooden, W.A. (Emory Univ. School of Medicine, Atlanta, GA (USA))

1990-10-01

Microvascular free tissue transfer has provided a variety of methods of restoring vascularized bone and soft tissue to difficult defects created by tumor resection and trauma. Over 7 years, 26 patients have undergone 28 free flaps for mandibular reconstruction, 15 for primary squamous cell carcinoma of the floor of the mouth or tongue, 7 for recurrent tumor, and 6 for other reasons (lymphangioma (1), infection (1), gunshot wound (1), and osteoradionecrosis (3)). Primary reconstruction was performed in 19 cases and secondary in 9. All repairs were composite flaps including 12 scapula, 5 radial forearm, 3 fibula, 2 serratus, and 6 deep circumflex iliac artery. Mandibular defects included the symphysis alone (7), symphysis and body (5), symphysis-body-ramus condyle (2), body or ramus (13), and bilateral body (1). Fourteen patients had received prior radiotherapy to adjuvant or curative doses. Eight received postoperative radiotherapy. All patients had initially successful vascularized reconstruction by clinical examination (28) and positive radionuclide scan (22 of 22). Bony stability was achieved in 25 of 26 patients and oral continence in 24 of 26. One complete flap loss occurred at 14 days. Complications of some degree developed in 22 patients including partial skin necrosis (3), orocutaneous fistula (3), plate exposure (1), donor site infection (3), fracture of reconstruction (1), and fracture of the radius (1). Microvascular transfer of bone and soft tissue allows a reliable reconstruction--despite previous radiotherapy, infection, foreign body, or surgery--in almost every situation in which mandible and soft tissue are absent. Bony union, a healed wound, and reasonable function and appearance are likely despite early fistula, skin loss, or metal plate or bone exposure.

Aggregate Measures of Watershed Health from Reconstructed ...

Science.gov (United States)

Risk-based indices such as reliability, resilience, and vulnerability (R-R-V), have the potential to serve as watershed health assessment tools. Recent research has demonstrated the applicability of such indices for water quality (WQ) constituents such as total suspended solids and nutrients on an individual basis. However, the calculations can become tedious when time-series data for several WQ constituents have to be evaluated individually. Also, comparisons between locations with different sets of constituent data can prove difficult. In this study, data reconstruction using relevance vector machine algorithm was combined with dimensionality reduction via variational Bayesian noisy principal component analysis to reconstruct and condense sparse multidimensional WQ data sets into a single time series. The methodology allows incorporation of uncertainty in both the reconstruction and dimensionality-reduction steps. The R-R-V values were calculated using the aggregate time series at multiple locations within two Indiana watersheds. Results showed that uncertainty present in the reconstructed WQ data set propagates to the aggregate time series and subsequently to the aggregate R-R-V values as well. serving as motivating examples. Locations with different WQ constituents and different standards for impairment were successfully combined to provide aggregate measures of R-R-V values. Comparisons with individual constituent R-R-V values showed that v

Polynomials, Riemann surfaces, and reconstructing missing-energy events

CERN Document Server

Gripaios, Ben; Webber, Bryan

2011-01-01

We consider the problem of reconstructing energies, momenta, and masses in collider events with missing energy, along with the complications introduced by combinatorial ambiguities and measurement errors. Typically, one reconstructs more than one value and we show how the wrong values may be correlated with the right ones. The problem has a natural formulation in terms of the theory of Riemann surfaces. We discuss examples including top quark decays in the Standard Model (relevant for top quark mass measurements and tests of spin correlation), cascade decays in models of new physics containing dark matter candidates, decays of third-generation leptoquarks in composite models of electroweak symmetry breaking, and Higgs boson decay into two tau leptons.

Energy report 1995 for Schleswig-Holstein. Situation, focal areas, examples; Energiebericht Schleswig-Holstein 1995. Situation, Schwerpunkte, Beispiele

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

Since 1988 the Land of Schleswig Holstein has been going new ways in its energy policy. Its declared aims are energy saving in heat and electricity supply, efficient energy utilisation, a greater utilisation of renewable energy resources, and, of principal importance, the phase-out of nuclear energy. As the legislative competence of the Laender is very restricted in matters relating to energy, the new policy has primarily been designed as a means of demonstrating by way of example that there actually are considerable potentials for saving energy and that they can be exploited. The present report gives an overview of the results of Schleswig Holstein`s energy policy of the last seven years. (orig./RHM) [Deutsch] Seit 1988 geht das Land Schleswig-Holstein energiepolitisch neue Wege. Das erklaerte Ziel: Energieeinsparung im Waerme- und Strombereich, rationelle Energieverwendung, staerkere Nutzung erneuerbarer Energien. Und grundsaetzlich: Ausstieg aus der Kernenergie. Da die Bundeslaender nur ueber eine sehr eingeschraenkte Gesetzgebungskompetenz im Energiebereich verfuegen, zielte die neue Energiepolitik zunaechst darauf ab, durch Foerderprogramme beispielhaft zu zeigen, dass tatsaechlich erhebliche Einsparpotentiale bestehen und auch umsetzbar sind. Der Bericht gibt einen Ueberblick ueber die Ergebnisse der Energiepolitik der letzten sieben Jahre in Schleswig-Holstein. (orig./RHM)

[Advantage investigation of totally laparoscopic modified Roux-en-Y reconstruction].

Science.gov (United States)

Liu, Tianzhou; Ma, Zhiming; Sun, Pengda; Li, Jinlong; Fang, Xuedong; Tong, Ti; Zhu, Jiaming

2016-01-01

To investigate the clinical advantage of the application of modified Roux-en-Y reconstruction after totally laparoscopic total gastrectomy. Clinical data of 36 patients who underwent totally laparoscopic total gastrectomy with Roux-en-Y reconstruction by one medical team for gastric adenocarcinoma between January 2014 and December 2014 in the Second Hospital of Jilin University were retrospectively analyzed. Patients were divided into classic Roux-en-Y group (CRY, 16 cases) and modified Roux-en-Y group (MRY, 20 cases) according to reconstructive methods. The data concerning the intraoperative and postoperative situation in two groups were compared. Operation was successfully completed in all the cases without conversion to laparotomy. Compared to CRY group, MRY group had shorter mean operative time [(260.9 ± 21.2) min vs. (287.9 ± 19.0) min, P=0.000], shorter mean reconstruction duration [(32.4 ± 9.2] min vs. (45.4 ± 13.2) min, P=0.001] and less intraoperative bleeding [(50.9 ± 23.5) ml vs. (67.0 ± 20.5) ml, P=0.000]. Jejunum mesentery dissection and jejunum resection were not necessary in MRY group. However, there were no significant differences in lymph nodes harvested, time to flatus, hospital stay and postoperative complications between two groups. As compared to classic Roux-en-Y reconstruction, the modified Roux-en-Y reconstruction can simplify the surgical procedures and achieve similar efficacy. It is feasible and safe, and worth further promotion in clinical practice.

Fan beam image reconstruction with generalized Fourier slice theorem.

Science.gov (United States)

Zhao, Shuangren; Yang, Kang; Yang, Kevin

2014-01-01

For parallel beam geometry the Fourier reconstruction works via the Fourier slice theorem (or central slice theorem, projection slice theorem). For fan beam situation, Fourier slice can be extended to a generalized Fourier slice theorem (GFST) for fan-beam image reconstruction. We have briefly introduced this method in a conference. This paper reintroduces the GFST method for fan beam geometry in details. The GFST method can be described as following: the Fourier plane is filled by adding up the contributions from all fanbeam projections individually; thereby the values in the Fourier plane are directly calculated for Cartesian coordinates such avoiding the interpolation from polar to Cartesian coordinates in the Fourier domain; inverse fast Fourier transform is applied to the image in Fourier plane and leads to a reconstructed image in spacial domain. The reconstructed image is compared between the result of the GFST method and the result from the filtered backprojection (FBP) method. The major differences of the GFST and the FBP methods are: (1) The interpolation process are at different data sets. The interpolation of the GFST method is at projection data. The interpolation of the FBP method is at filtered projection data. (2) The filtering process are done in different places. The filtering process of the GFST is at Fourier domain. The filtering process of the FBP method is the ramp filter which is done at projections. The resolution of ramp filter is variable with different location but the filter in the Fourier domain lead to resolution invariable with location. One advantage of the GFST method over the FBP method is in short scan situation, an exact solution can be obtained with the GFST method, but it can not be obtained with the FBP method. The calculation of both the GFST and the FBP methods are at O(N^3), where N is the number of pixel in one dimension.

An approach to reconstruction of a natural crack using signals of eddy current testing. 1. Reconstruction of an idealized natural crack

International Nuclear Information System (INIS)

Chen, Zhenmao

1998-12-01

In this paper, an approach to the reconstruction of an idealized natural crack of non-vanishing conductivity is proposed with use of signals of eddy current testing. Two numerical models are introduced at first for modeling a Stress Corrosion Crack (SCC) in order it possibly to be represented by a set of crack parameters. A method for rapid prediction of the eddy current testing signals arisen from these idealized cracks is given then by extending a knowledge based fast forward solver developed by authors to the case of a non-vanishing conductivity. On the other hand, the inverse algorithm of conjugate gradient method is improved to reconstruct the crack parameters and is implemented with the pick-up signals and gradients calculated by using the rapid forward solver. Several examples are presented finally for validating the proposed strategy. The results verified that both of the models can give reasonable reconstruction results in case of a low noise level. The model concerning the touch of crack surfaces with a conducting band region surrounded by the crack edge, however, is proved more efficient that the model using a conductivity distribution from the point of view of both reconstruction speed and accuracy. (author)

Total nasal reconstruction with 3D custom made porous titanium prosthesis and free thoracodorsal artery perforator flap: A case report.

Science.gov (United States)

Qassemyar, Quentin; Assouly, Nathaniel; Madar, Yoni; Temam, Stéphane; Kolb, Frédéric

2018-02-21

Total nasal reconstruction is a challenging surgical procedure which usually involves a free flap, forehead flap, and cartilage grafts. In certain failure situations where patients do not accept the idea of anaplastology, possibilities become very limited. We report the case of a patient who underwent several reconstruction steps with multiple failures including free and local flaps and cartilage harvests which showed recurrent episodes of necrosis and infection leading to melting and collapse of reconstructed structures. Furthermore, the patient did not want any anaplastological rehabilitation. We proposed to the patient an innovative method that consists to print a three-dimensional custom-made porous titanium prosthesis, based on the original shape of his nose, to replace the cartilage support. This implant was first inserted in a thoracodorsal artery perforator flap for primary integration before the free transfer of the complete structure, two months later. The free transfer was successful without any complication. A stable reconstruction and satisfying result was obtained. The patient did not want additional surgical improvement 24 months post-operatively, and resumed his professional activities. The possibility of using three-dimensional custom titanium prostheses to replace the bone and cartilage support seems to be an interesting alternative for patients in the failure situation of nasal reconstruction. © 2018 Wiley Periodicals, Inc.

Alpha image reconstruction (AIR): A new iterative CT image reconstruction approach using voxel-wise alpha blending

International Nuclear Information System (INIS)

Hofmann, Christian; Sawall, Stefan; Knaup, Michael; Kachelrieß, Marc

2014-01-01

Purpose: Iterative image reconstruction gains more and more interest in clinical routine, as it promises to reduce image noise (and thereby patient dose), to reduce artifacts, or to improve spatial resolution. Among vendors and researchers, however, there is no consensus of how to best achieve these aims. The general approach is to incorporatea priori knowledge into iterative image reconstruction, for example, by adding additional constraints to the cost function, which penalize variations between neighboring voxels. However, this approach to regularization in general poses a resolution noise trade-off because the stronger the regularization, and thus the noise reduction, the stronger the loss of spatial resolution and thus loss of anatomical detail. The authors propose a method which tries to improve this trade-off. The proposed reconstruction algorithm is called alpha image reconstruction (AIR). One starts with generating basis images, which emphasize certain desired image properties, like high resolution or low noise. The AIR algorithm reconstructs voxel-specific weighting coefficients that are applied to combine the basis images. By combining the desired properties of each basis image, one can generate an image with lower noise and maintained high contrast resolution thus improving the resolution noise trade-off. Methods: All simulations and reconstructions are performed in native fan-beam geometry. A water phantom with resolution bar patterns and low contrast disks is simulated. A filtered backprojection (FBP) reconstruction with a Ram-Lak kernel is used as a reference reconstruction. The results of AIR are compared against the FBP results and against a penalized weighted least squares reconstruction which uses total variation as regularization. The simulations are based on the geometry of the Siemens Somatom Definition Flash scanner. To quantitatively assess image quality, the authors analyze line profiles through resolution patterns to define a contrast

A Solution to Hammer's X-ray Reconstruction Problem

DEFF Research Database (Denmark)

Gardner, Richard J.; Kiderlen, Markus

2007-01-01

We propose algorithms for reconstructing a planar convex body K from possibly noisy measurements of either its parallel X-rays taken in a fixed finite set of directions or its point X-rays taken at a fixed finite set of points, in known situations that guarantee a unique solution when the data is...... to K in the Hausdorff metric as k tends to infinity. This solves, for the first time in the strongest sense, Hammer’s X-ray problem published in 1963....

Reconstruction of railway energy lines; Rekonstruktion von Bahnenergieleitungen

Energy Technology Data Exchange (ETDEWEB)

Rothe, Matthias [DB Energie Gmbh, Berlin (Germany); Wahlen, Manfred [DB Energie Gmbh, Koeln (Germany)

2013-06-15

As is the case for other overhead lines, 110 kV railway energy lines are assumed to have a service life of 80 years. When this service life ends or the lines are adapted to the state of the art as necessary, all components of the overhead line are renewed. For the reconstruction of railway energy lines, the specifications laid down in planning and environmental laws, operational management aspects and the local ambient and development situation are decisive project planning parameters. (orig.)

Comparison among tomographic reconstruction with limited data

International Nuclear Information System (INIS)

Oliveira, Eric F.; Dantas, Carlos C.; Vasconcelos, Daniel A.A.; Cadiz, Luis F.; Melo, Silvio B.

2011-01-01

Nowadays there is a continuing interest in applying computed tomography (CT) techniques in non-destructive testing and inspection of many industrial products. These applications of CT usually require a differentiated analysis when there are strong limitations in acquiring a sufficiently large amount of projection data. The use of a low number of tomographic data normally degrades the quality of the reconstructed image, highlighting the formation of artifacts and noise. This work investigates the reconstruction methods most commonly used (FBP, ART, SIRT, MART, SMART) and shows the performance of each one in this limited scenario. For this purpose, all methods were implemented and tested with a phantom of uniform density with well-known distribution, with measures of transmission of gamma radiation in a first generation CT scanner. The phantom is a concentric stainless steel tube coupled with a half - cylinder of aluminum. The measurements were made with an highest root mean square error, with the formation of visible artifacts. The artifacts are diminished but still visible in the ART and SIRT techniques, and the best performance was observed with the techniques MART and SMART. The technical superiority of these multiplicative methods is clearly seen in the reconstructed image quality, endorsing their application to situations of limited input data. (author)

Reconstruction of Orbital Floor With Auricular Concha.

Science.gov (United States)

Seven, Ergin; Tellioglu, Ali Teoman; Inozu, Emre; Ozakpinar, Hulda Rifat; Horoz, Ugur; Eryilmaz, Avni Tolga; Karamursel, Sebat

2017-10-01

Orbital floor fractures of varying sizes commonly occur after orbital injuries and remain a serious challenge. Serious complications of such fractures include enopthalmos, restriction of extraocular movement, and diplopia. There is a dearth of literature that can be applied widely, easily, and successfully in all such situations, and therefore there is no consensus on the treatment protocol of this pathology yet. Autogenous grafts and alloplastic and allogenic materials with a wide variety of advantages and disadvantages have been discussed. The value of preoperative and postoperative ophthalmological examination should be standard of care in all orbital fracture patients. An ideal reconstructed orbital floor fracture should accelerate the restoration of orbital function with acceptable cosmetic results. Management parameters of orbital fractures such as timing of surgery, incision type, and implant materials, though widely discussed, remain controversial. In this study, 55 patients with orbital floor fractures surgically reconstructed with conchal cartilage grafts between 2008 and 2014 were retrospectively evaluated. Complications and long-time follow-up visit results have been reported with clinical and radiographic findings. The aim of this study was to present the authors' clinical experiences of reconstruction of blow-out fractures with auricular conchal graft and to evaluate the other materials available for use.

The potential of pollen-based quantitative vegetation reconstructions in studies of past human settlements and use of resources - examples from Europe

Science.gov (United States)

Gaillard, Marie-Jose; Cui, Qiao-Yu; Lemdahl, Geoffrey; Trondman, Anna-Kari

2015-04-01

approach - the Landscape Reconstruction Algorithm (LRA) (3, 4) - makes it possible to estimate the cover of plant taxa or landscape units at both regional and local spatial scales using pollen records. The LRA has been tested and applied in various types of studies in Europe in particular. Examples from Europe and Scandinavia show that pollen-based quantitative reconstructions of vegetation cover, in combination with other palaeoecological records such as insect and plant macroremains, show the great potential of such studies to provide new insights on the use of landscapes and vegetation by humans in the past and its environmental consequences at both regional and local spatial scales (5, 6). These results provide a new environmental framework for the discussion and testing of hypotheses based on archaeological data. (1) Berglund, B.E. (1991) Ecological Bulletins 41: 1-495. (2) Gaillard, M.-J. et al. (1994) Review of Palaeobotany and Palynology 82: 47-73. (3) Sugita, S. (2007a) The Holocene 17: 243-257. (4) Sugita, S. (2007b) The Holocene 17: 229-241. (5) Cui, Q.-Y. et al. (2014) Ecology and Evolution, doi: 10.1002/ece3.1198 (6) Trondman, A.-K. (2014) Global Change Biology, doi: 10.1111/gcb.12737

Worked Examples Leads to Better Performance in Analyzing and Solving Real-Life Decision Cases

Science.gov (United States)

Cevik, Yasemin Demiraslan; Andre, Thomas

2012-01-01

This study compared the impact of three types of case-based methods (worked example, faded worked example, and case-based reasoning) on preservice teachers' (n=71) decision making and reasoning related to realistic classroom management situations. Participants in this study received a short-term implementation of one of these three major…

Image reconstruction under non-Gaussian noise

DEFF Research Database (Denmark)

Sciacchitano, Federica

During acquisition and transmission, images are often blurred and corrupted by noise. One of the fundamental tasks of image processing is to reconstruct the clean image from a degraded version. The process of recovering the original image from the data is an example of inverse problem. Due...... to the ill-posedness of the problem, the simple inversion of the degradation model does not give any good reconstructions. Therefore, to deal with the ill-posedness it is necessary to use some prior information on the solution or the model and the Bayesian approach. Additive Gaussian noise has been......D thesis intends to solve some of the many open questions for image restoration under non-Gaussian noise. The two main kinds of noise studied in this PhD project are the impulse noise and the Cauchy noise. Impulse noise is due to for instance the malfunctioning pixel elements in the camera sensors, errors...

Image improvement and three-dimensional reconstruction using holographic image processing

Science.gov (United States)

Stroke, G. W.; Halioua, M.; Thon, F.; Willasch, D. H.

1977-01-01

Holographic computing principles make possible image improvement and synthesis in many cases of current scientific and engineering interest. Examples are given for the improvement of resolution in electron microscopy and 3-D reconstruction in electron microscopy and X-ray crystallography, following an analysis of optical versus digital computing in such applications.

On application of modified F – statistic: an example of sales ...

African Journals Online (AJOL)

On application of modified F – statistic: an example of sales distribution of pharmaceutical ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... This test statistic is more applicable in a situation when we have three or more ...

Estimation of 3D reconstruction errors in a stereo-vision system

Science.gov (United States)

Belhaoua, A.; Kohler, S.; Hirsch, E.

2009-06-01

The paper presents an approach for error estimation for the various steps of an automated 3D vision-based reconstruction procedure of manufactured workpieces. The process is based on a priori planning of the task and built around a cognitive intelligent sensory system using so-called Situation Graph Trees (SGT) as a planning tool. Such an automated quality control system requires the coordination of a set of complex processes performing sequentially data acquisition, its quantitative evaluation and the comparison with a reference model (e.g., CAD object model) in order to evaluate quantitatively the object. To ensure efficient quality control, the aim is to be able to state if reconstruction results fulfill tolerance rules or not. Thus, the goal is to evaluate independently the error for each step of the stereo-vision based 3D reconstruction (e.g., for calibration, contour segmentation, matching and reconstruction) and then to estimate the error for the whole system. In this contribution, we analyze particularly the segmentation error due to localization errors for extracted edge points supposed to belong to lines and curves composing the outline of the workpiece under evaluation. The fitting parameters describing these geometric features are used as quality measure to determine confidence intervals and finally to estimate the segmentation errors. These errors are then propagated through the whole reconstruction procedure, enabling to evaluate their effect on the final 3D reconstruction result, specifically on position uncertainties. Lastly, analysis of these error estimates enables to evaluate the quality of the 3D reconstruction, as illustrated by the shown experimental results.

Stochastic mass-reconstruction: a new technique to reconstruct resonance masses of heavy particles decaying into tau lepton pairs

Energy Technology Data Exchange (ETDEWEB)

Maruyama, Sho [Fermilab

2015-12-15

The invariant mass of tau lepton pairs turns out to be smaller than the resonant mass of their mother particle and the invariant mass distribution is stretched wider than the width of the resonant mass as significant fraction of tau lepton momenta are carried away by neutrinos escaping undetected at collider experiments. This paper describes a new approach to reconstruct resonant masses of heavy particles decaying to tau leptons at such experiments. A typical example is a Z or Higgs boson decaying to a tau pair. Although the new technique can be used for each tau lepton separately, I combine two tau leptons to improve mass resolution by requiring the two tau leptons are lined up in a transverse plane. The method is simple to implement and complementary to the collinear approximation technique that works well when tau leptons are not lined up in a transverse plane. The reconstructed mass can be used as another variable in analyses that already use a visible tau pair mass and missing transverse momentum as these variables are not explicitly used in the stochastic mass-reconstruction to select signal-like events.

Reconstruction of the maxilla following hemimaxillectomy defects with scapular tip grafts and dental implants.

Science.gov (United States)

Mertens, Christian; Freudlsperger, Christian; Bodem, Jens; Engel, Michael; Hoffmann, Jürgen; Freier, Kolja

2016-11-01

Treatment of post-resective defects of the maxilla can be challenging and usually requires dental obturation or microvascular reconstruction. As compared to soft-tissue microvascular grafts, bone reconstruction can additionally allow for facial support and retention of dental implants. The aim of this study was to evaluate scapular tip grafts with respect to their applicability for maxillary reconstruction and their potential to retain dental implants for later dental rehabilitation. In this retrospective study, 14 patients with hemimaxillectomy defects were reconstructed with free scapular tip grafts, oriented horizontally, to rebuild the palate and alveolar ridge. After bone healing, three-dimensional virtual implant planning was performed, and a radiographic guide was fabricated to enable implant placement in the optimal anatomic and prosthetic position. All patients' mastication and speech were evaluated, along with the extent of defect closure, suitability of the graft sites for implant placement, and soft-tissue stability. Pre- and postsurgical radiographs were also evaluated. A good postoperative outcome was achieved in all patients, with complete closure of maxillary defects that were class II, according to the system of Brown and Shaw. Additional bone augmentation was necessary in two patients in order to increase vertical bone height. Patients were subsequently treated with 50 dental implants to retain dental prostheses. In all cases, additional soft-tissue surgery was necessary to achieve a long-term stable periimplant situation. No implants were lost during the mean observation period of 34 months. Due to its specific form, the scapular tip graft is well suited to reconstruct the palate and maxillary alveolar ridge and to enable subsequent implant-retained rehabilitation. Due to the limited bone volume, an accurate three-dimensional graft orientation is essential. Furthermore, most cases require additional soft-tissue surgery to achieve a long

Lensing reconstruction from a patchwork of polarization maps

International Nuclear Information System (INIS)

Namikawa, Toshiya; Nagata, Ryo

2014-01-01

The lensing signals involved in CMB polarization maps have already been measured with ground-based experiments such as SPTpol and POLARBEAR, and would become important as a probe of cosmological and astrophysical issues in the near future. Sizes of polarization maps from ground-based experiments are, however, limited by contamination of long wavelength modes of observational noise. To further extract the lensing signals, we explore feasibility of measuring lensing signals from a collection of small sky maps each of which is observed separately by a ground-based large telescope, i.e., lensing reconstruction from a patchwork map of large sky coverage organized from small sky patches. We show that, although the B-mode power spectrum obtained from the patchwork map is biased due to baseline uncertainty, bias on the lensing potential would be negligible if the B-mode on scales larger than the blowup scale of 1/f noise is removed in the lensing reconstruction. As examples of cosmological applications, we also show 1) the cross-correlations between the reconstructed lensing potential and full-sky temperature/polarization maps from satellite missions such as PLANCK and LiteBIRD, and 2) the use of the reconstructed potential for delensing B-mode polarization of LiteBIRD observation

Stochastic microstructure characterization and reconstruction via supervised learning

International Nuclear Information System (INIS)

Bostanabad, Ramin; Bui, Anh Tuan; Xie, Wei; Apley, Daniel W.; Chen, Wei

2016-01-01

Microstructure characterization and reconstruction have become indispensable parts of computational materials science. The main contribution of this paper is to introduce a general methodology for practical and efficient characterization and reconstruction of stochastic microstructures based on supervised learning. The methodology is general in that it can be applied to a broad range of microstructures (clustered, porous, and anisotropic). By treating the digitized microstructure image as a set of training data, we generically learn the stochastic nature of the microstructure via fitting a supervised learning model to it (we focus on classification trees). The fitted supervised learning model provides an implicit characterization of the joint distribution of the collection of pixel phases in the image. Based on this characterization, we propose two different approaches to efficiently reconstruct any number of statistically equivalent microstructure samples. We test the approach on five examples and show that the spatial dependencies within the microstructures are well preserved, as evaluated via correlation and lineal-path functions. The main advantages of our approach stem from having a compact empirically-learned model that characterizes the stochastic nature of the microstructure, which not only makes reconstruction more computationally efficient than existing methods, but also provides insight into morphological complexity.

Image-reconstruction algorithms for positron-emission tomography systems

International Nuclear Information System (INIS)

Cheng, S.N.C.

1982-01-01

The positional uncertainty in the time-of-flight measurement of a positron-emission tomography system is modelled as a Gaussian distributed random variable and the image is assumed to be piecewise constant on a rectilinear lattice. A reconstruction algorithm using maximum-likelihood estimation is derived for the situation in which time-of-flight data are sorted as the most-likely-position array. The algorithm is formulated as a linear system described by a nonseparable, block-banded, Toeplitz matrix, and a sine-transform technique is used to implement this algorithm efficiently. The reconstruction algorithms for both the most-likely-position array and the confidence-weighted array are described by similar equations, hence similar linear systems can be used to described the reconstruction algorithm for a discrete, confidence-weighted array, when the matrix and the entries in the data array are properly identified. It is found that the mean square-error depends on the ratio of the full width at half the maximum of time-of-flight measurement over the size of a pixel. When other parameters are fixed, the larger the pixel size, the smaller is the mean square-error. In the study of resolution, parameters that affect the impulse response of time-of-flight reconstruction algorithms are identified. It is found that the larger the pixel size, the larger is the standard deviation of the impulse response. This shows that small mean square-error and fine resolution are two contradictory requirements

Questions of uniqueness and resolution in reconstruction from projections

CERN Document Server

Katz, Myron Bernard

1978-01-01

Reconstruction from projections has revolutionized radiology and as now become one of the most important tools of medical diagnosi- he E. M. I. Scanner is one example. In this text, some fundamental heoretical and practical questions are resolved. Despite recent research activity in the area, the crucial subject ·f the uniqueness of the reconstruction and the effect of noise in the ata posed some unsettled fundamental questions. In particular, Kennan mith proved that if we describe an object by a C~ function, i. e. , nfinitely differentiable with compact support, then there are other bjects with the same shape, i. e. , support, which can differ almost rhitrarily and still have the same projections in finitely many direc­ ions. On the other hand, he proved that objects in finite dimensional unction spaces are uniquely determined by a single projection for almost 11 angles, i. e. , except on a set of measure zero. Along these lines, erman and Rowland in [41) showed that reconstructions obtained from he common...

Cropland changes in times of conflict, reconstruction, and economic development in Iraqi Kurdistan.

Science.gov (United States)

Eklund, Lina; Persson, Andreas; Pilesjö, Petter

2016-02-01

The destruction of land and forced migration during the Anfal attacks against the Kurds in Iraq in the late 1980s has been reported to have severe consequences for agricultural development. A reconstruction program to aid people in returning to their lands was launched in 1991. To assess the agricultural situation in the Duhok governorate during the pre-Anfal (A), post-Anfal (B), reconstruction (C), and present (D) periods, we mapped winter crops by focusing on inter-annual variability in vegetation greenness, using satellite images. The results indicate a decrease in cultivated area between period A and B, and a small increase between period B and C. This supports reports of a decline in cultivated area related to the Anfal campaign, and indicates increased activity during the reconstruction program. Period D showed a potential recovery with a cropland area similar to period A.

An analytical reconstruction model of the spread-out Bragg peak using laser-accelerated proton beams.

Science.gov (United States)

Tao, Li; Zhu, Kun; Zhu, Jungao; Xu, Xiaohan; Lin, Chen; Ma, Wenjun; Lu, Haiyang; Zhao, Yanying; Lu, Yuanrong; Chen, Jia-Er; Yan, Xueqing

2017-07-07

With the development of laser technology, laser-driven proton acceleration provides a new method for proton tumor therapy. However, it has not been applied in practice because of the wide and decreasing energy spectrum of laser-accelerated proton beams. In this paper, we propose an analytical model to reconstruct the spread-out Bragg peak (SOBP) using laser-accelerated proton beams. Firstly, we present a modified weighting formula for protons of different energies. Secondly, a theoretical model for the reconstruction of SOBPs with laser-accelerated proton beams has been built. It can quickly calculate the number of laser shots needed for each energy interval of the laser-accelerated protons. Finally, we show the 2D reconstruction results of SOBPs for laser-accelerated proton beams and the ideal situation. The final results show that our analytical model can give an SOBP reconstruction scheme that can be used for actual tumor therapy.

Environment and development in Reconstruction Plans in L'Aquila territory

Directory of Open Access Journals (Sweden)

M. Cristina Forlani

2013-05-01

Full Text Available The operational engagement on the Plans for Reconstruction (earthquake 2009 could allow to propose territorial development in terms of sustainability, informed by energy considerations and the opportunity to establish new activities, related to local economies, based on the search for possible sources of renewable energy and virtuous use of water and waste cycle. In particular, the reclassification of settlements could predispose transition elements, oriented to new concepts of living, which prelude to the definition of a sustainable "city"; we specifically refer to the possibility of developing a "smart" service network and regulating the housing dimension. It lacked, so far, the involvement of the "regional policy" for the guidance and support for the configuration of administrative and financial situations, suitable for a wide participation in fund raising, beyond the mere physical reconstruction.

New possibilities of three-dimensional reconstruction of computed tomography scans

International Nuclear Information System (INIS)

Herman, M.; Tarjan, Z.; Pozzi-Mucelli, R.S.

1996-01-01

Three-dimensional (3D) computed tomography (CT) scan reconstructions provide impressive and illustrative images of various parts of the human body. Such images are reconstructed from a series of basic CT scans by dedicated software. The state of the art in 3D computed tomography is demonstrated with emphasis on the imaging of soft tissues. Examples are presented of imaging the craniofacial and maxillofacial complex, central nervous system, cardiovascular system, musculoskeletal system, gastrointestinal and urogenital systems, and respiratory system, and their potential in clinical practice is discussed. Although contributing no new essential diagnostic information against conventional CT scans, 3D scans can help in spatial orientation. 11 figs., 25 refs

[Use and versatility of titanium for the reconstruction of the thoracic wall].

Science.gov (United States)

Córcoles Padilla, Juan Manuel; Bolufer Nadal, Sergio; Kurowski, Krzysztof; Gálvez Muñoz, Carlos; Rodriguez Paniagua, José Manuel

2014-02-01

Chest wall deformities/defects and chest wall resections, as well as complex rib fractures require reconstruction with various prosthetic materials to ensure the basic functions of the chest wall. Titanium provides many features that make it an ideal material for this surgery. The aim is to present our initial results with this material in several diseases. From 2008 to 2012, 14 patients were operated on and titanium was used for reconstruction of the chest wall. A total of 7 patients had chest wall tumors, 2 with sternal resection, 4 patients with chest wall deformities/defects and 3 patients with severe rib injury due to traffic accident. The reconstruction was successful in all cases, with early extubation without detecting problems in the functionality of the chest wall at a respiratory level. Patients with chest wall tumors including sternal resections were extubated in the operating room as well as the chest wall deformities. Chest trauma cases were extubated within 24h from internal rib fixation. There were no complications related to the material used and the method of implementation. Titanium is an ideal material for reconstruction of the chest wall in several clinical situations allowing for great versatility and adaptability in different chest wall reconstructions. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

Enhanced capital-asset pricing model for the reconstruction of bipartite financial networks

NARCIS (Netherlands)

Squartini, Tiziano; Almog, Assaf; Caldarelli, Guido; Van Lelyveld, Iman; Garlaschelli, Diego; Cimini, Giulio

2017-01-01

Reconstructing patterns of interconnections from partial information is one of the most important issues in the statistical physics of complex networks. A paramount example is provided by financial networks. In fact, the spreading and amplification of financial distress in capital markets are

Maitra-Burke example of initial-state dependence in time-dependent density-functional theory

International Nuclear Information System (INIS)

Holas, A.; Balawender, R.

2002-01-01

In a recent paper, Maitra and Burke [Phys. Rev. A 63, 042501 (2001); 64, 039901(E) (2001)] have given an interesting and instructive example that illustrates a specific feature of the time-dependent density-functional theory--the dependence of the reconstructed time-dependent potential not only on the electron density, but also on the initial state of the system. However, a concise form of its presentation by these authors is insufficient to reveal all its peculiarities. Our paper represents a very detailed study of this valuable example, intended to facilitate a better understanding and appreciation

Mastectomy Skin Necrosis After Breast Reconstruction: A Comparative Analysis Between Autologous Reconstruction and Implant-Based Reconstruction.

Science.gov (United States)

Sue, Gloria R; Lee, Gordon K

2018-05-01

Mastectomy skin necrosis is a significant problem after breast reconstruction. We sought to perform a comparative analysis on this complication between patients undergoing autologous breast reconstruction and patients undergoing 2-stage expander implant breast reconstruction. A retrospective review was performed on consecutive patients undergoing autologous breast reconstruction or 2-stage expander implant breast reconstruction by the senior author from 2006 through 2015. Patient demographic factors including age, body mass index, history of diabetes, history of smoking, and history of radiation to the breast were collected. Our primary outcome measure was mastectomy skin necrosis. Fisher exact test was used for statistical analysis between the 2 patient cohorts. The treatment patterns of mastectomy skin necrosis were then analyzed. We identified 204 patients who underwent autologous breast reconstruction and 293 patients who underwent 2-stage expander implant breast reconstruction. Patients undergoing autologous breast reconstruction were older, heavier, more likely to have diabetes, and more likely to have had prior radiation to the breast compared with patients undergoing implant-based reconstruction. The incidence of mastectomy skin necrosis was 30.4% of patients in the autologous group compared with only 10.6% of patients in the tissue expander group (P care in the autologous group, only 3.2% were treated with local wound care in the tissue expander group (P skin necrosis is significantly more likely to occur after autologous breast reconstruction compared with 2-stage expander implant-based breast reconstruction. Patients with autologous reconstructions are more readily treated with local wound care compared with patients with tissue expanders, who tended to require operative treatment of this complication. Patients considering breast reconstruction should be counseled appropriately regarding the differences in incidence and management of mastectomy skin

Examples of Mechanism Design : From King Solomon to eBay

NARCIS (Netherlands)

De Weerdt, M.M.

2007-01-01

The judgment of king Solomon is an early example of mechanism design. Mechanism design attempts to achieve desired outcomes in situations with self-interested players by setting the rules of the game in a specific way. We will see that the game Solomon proposed would not have worked if the women

Rescaling Education: Reconstructions of Scale in President Reagan's 1983 State of the Union Address

Science.gov (United States)

Collin, Ross; Ferrare, Joseph J.

2015-01-01

This article presents a discourse analysis of President Ronald Reagan's 1983 State of the Union Address. Focusing on questions of scale, the article considers how and with what effects Reagan reconstructs education as a local, state, national and global endeavour. It is argued that by situating education in a competitive global economy, Reagan…

Retrospective dosimetry of populations exposed to reactor accident: Chernobyl example, lesson for Fukushima

International Nuclear Information System (INIS)

Chumak, Vadim V.

2013-01-01

Follow-up of the Chernobyl accident had included a good deal of retrospective dosimetry and dose reconstruction. Comparison of Chernobyl and Fukushima shows that despite some differences in course and scale of the two accidents, main elements are present in both situations and Chernobyl experience could be quite educative for better understanding and more optimal handling of Fukushima Dai-ichi accident consequences. This paper contains review of dose reconstruction efforts done to date and extensively published in scientific journals and reports. Specifically the following cases are considered: (i) evaluation of individual doses to evacuees; (ii) validation of ecological dosimetric models and ruling out unconfirmed dose rate measurements; dosimetric support of (iii) case–control study of leukemia among Chernobyl clean-up workers (liquidators), and (iv) cohort study of cataracts among liquidators. Due to limited size of this paper the given application cases are rather outlined while more detailed descriptions could be found in relevant publications. Each considered Chernobyl case is commented with respect to possible application to Fukushima Dai-ichi situation. The presented methodological findings and approaches could be used for retrospective assessment of human exposures in Fukushima. -- Highlights: ► Retrospective dosimetry in Chernobyl was applied for evaluation of individual doses to evacuees. ► Retrospective dosimetry in Chernobyl was applied for validation of ecological dosimetric models, rejection dubious dose rate records. ► Retrospective dosimetry in Chernobyl was applied for risk assessment of leukemia among Chernobyl clean-up workers (liquidators). ► Retrospective dosimetry in Chernobyl was applied for study of cataracts among liquidators. ► Experience of dose reconstruction in Chernobyl could be used for retrospective assessment of exposures in Fukushima

Feeling low, thinking slow? Associations between situational cues, mood and cognitive function.

Science.gov (United States)

von Stumm, Sophie

2018-02-01

Within-person changes in mood, which are triggered by situational cues, for example someone's location or company, are thought to affect contemporaneous cognitive function. To test this hypothesis, data were collected over 6 months with the smartphone application (app) moo-Q that prompted users at random times to rate their mood and complete 3 short cognitive tests. Out of 24,313 people across 154 countries, who downloaded the app, 770 participants submitted 10 or more valid moo-Q responses (mean = 23; SD = 18; range 10-207). Confirming previous research, consistent patterns of association emerged for 6 different situation cues with mood and cognitive function: For example, being alone rather than with others when completing the app resulted in worse mood but better cognitive task performance. Notwithstanding, changes in mood and cognitive function were not coupled. The advantages and challenges of using smartphone technology for studying mood and cognitive function are discussed.

Teachers' interaction with children in the school meal situation: the example of pedagogic meals in Sweden.

Science.gov (United States)

Persson Osowski, Christine; Göranzon, Helen; Fjellström, Christina

2013-01-01

School meals are also a teaching occasion in which children learn about food and meals, which is referred to as "pedagogic meals" in Sweden. The aim of the present article was to study how the pedagogic meal is practiced in preschool and school settings, with focus on how teachers acted when interacting with the children. Observations, interviews, and focus group interviews. School canteens. Three schools. Teaching in the school meal situation. Social constructionism, new social studies of childhood. The teachers took on 3 different roles. The sociable teacher role entailed turning the school lunch into a social occasion, the educating teacher role involved educating the children, and the evasive teacher role was not associated with the definition of a pedagogic meal. The teacher roles, which ranged from adult-oriented to child-oriented, and which varied in the level of interaction with the children, were summarized in a framework named the Adult- to Child-oriented Teacher Role Framework for School Meals (ACTS). To realize the potential of pedagogic meals, teachers must be educated and become aware of the effects of their behaviors. In this situation, the ACTS framework can constitute a useful tool. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Automated reconstruction of 3D models from real environments

Science.gov (United States)

Sequeira, V.; Ng, K.; Wolfart, E.; Gonçalves, J. G. M.; Hogg, D.

This paper describes an integrated approach to the construction of textured 3D scene models of building interiors from laser range data and visual images. This approach has been implemented in a collection of algorithms and sensors within a prototype device for 3D reconstruction, known as the EST (Environmental Sensor for Telepresence). The EST can take the form of a push trolley or of an autonomous mobile platform. The Autonomous EST (AEST) has been designed to provide an integrated solution for automating the creation of complete models. Embedded software performs several functions, including triangulation of the range data, registration of video texture, registration and integration of data acquired from different capture points. Potential applications include facilities management for the construction industry and creating reality models to be used in general areas of virtual reality, for example, virtual studios, virtualised reality for content-related applications (e.g., CD-ROMs), social telepresence, architecture and others. The paper presents the main components of the EST/AEST, and presents some example results obtained from the prototypes. The reconstructed model is encoded in VRML format so that it is possible to access and view the model via the World Wide Web.

Overlapping constraint for variational surface reconstruction

DEFF Research Database (Denmark)

Aanæs, Henrik; Solem, J.E.

2005-01-01

In this paper a counter example, illustrating a shortcoming in most variational formulations for 3D surface estimation, is presented. The nature of this shortcoming is a lack of an overlapping constraint. A remedy for this shortcoming is presented in the form of a penalty function with an analysi...... of the effects of this function on surface motion. For practical purposes, this will only have minor influence on current methods. However, the insight provided in the analysis is likely to influence future developments in the field of variational surface reconstruction....

Data reconstruction can improve abundance index estimation: An example using Taiwanese longline data for Pacific bluefin tuna.

Directory of Open Access Journals (Sweden)

Shui-Kai Chang

Full Text Available Catch-per-unit-effort (CPUE is often the main piece of information used in fisheries stock assessment; however, the catch and effort data that are traditionally compiled from commercial logbooks can be incomplete or unreliable due to many reasons. Pacific bluefin tuna (PBF is a seasonal target species in the Taiwanese longline fishery. Since 2010, detailed catch information for each PBF has been made available through a catch documentation scheme. However, previously, only market landing data with a low coverage of logbooks were available. Therefore, several nontraditional procedures were performed to reconstruct catch and effort data from many alternative data sources not directly obtained from fishers for 2001-2015: (1 Estimating the catch number from the landing weight for 2001-2003, for which the catch number information was incomplete, based on Monte Carlo simulation; (2 deriving fishing days for 2007-2009 from voyage data recorder data, based on a newly developed algorithm; and (3 deriving fishing days for 2001-2006 from vessel trip information, based on linear relationships between fishing and at-sea days. Subsequently, generalized linear mixed models were developed with the delta-lognormal assumption for standardizing the CPUE calculated from the reconstructed data, and three-stage model evaluation was performed using (1 Akaike and Bayesian information criteria to determine the most favorable variable composition of standardization models, (2 overall R2 via cross-validation to compare fitting performance between area-separated and area-combined standardizations, and (3 system-based testing to explore the consistency of the standardized CPUEs with auxiliary data in the PBF stock assessment model. The last stage of evaluation revealed high consistency among the data, thus demonstrating improvements in data reconstruction for estimating the abundance index, and consequently the stock assessment.

UROX 2.0: an interactive tool for fitting atomic models into electron-microscopy reconstructions

International Nuclear Information System (INIS)

Siebert, Xavier; Navaza, Jorge

2009-01-01

UROX is software designed for the interactive fitting of atomic models into electron-microscopy reconstructions. The main features of the software are presented, along with a few examples. Electron microscopy of a macromolecular structure can lead to three-dimensional reconstructions with resolutions that are typically in the 30–10 Å range and sometimes even beyond 10 Å. Fitting atomic models of the individual components of the macromolecular structure (e.g. those obtained by X-ray crystallography or nuclear magnetic resonance) into an electron-microscopy map allows the interpretation of the latter at near-atomic resolution, providing insight into the interactions between the components. Graphical software is presented that was designed for the interactive fitting and refinement of atomic models into electron-microscopy reconstructions. Several characteristics enable it to be applied over a wide range of cases and resolutions. Firstly, calculations are performed in reciprocal space, which results in fast algorithms. This allows the entire reconstruction (or at least a sizeable portion of it) to be used by taking into account the symmetry of the reconstruction both in the calculations and in the graphical display. Secondly, atomic models can be placed graphically in the map while the correlation between the model-based electron density and the electron-microscopy reconstruction is computed and displayed in real time. The positions and orientations of the models are refined by a least-squares minimization. Thirdly, normal-mode calculations can be used to simulate conformational changes between the atomic model of an individual component and its corresponding density within a macromolecular complex determined by electron microscopy. These features are illustrated using three practical cases with different symmetries and resolutions. The software, together with examples and user instructions, is available free of charge at http://mem.ibs.fr/UROX/

Low rank alternating direction method of multipliers reconstruction for MR fingerprinting.

Science.gov (United States)

Assländer, Jakob; Cloos, Martijn A; Knoll, Florian; Sodickson, Daniel K; Hennig, Jürgen; Lattanzi, Riccardo

2018-01-01

The proposed reconstruction framework addresses the reconstruction accuracy, noise propagation and computation time for magnetic resonance fingerprinting. Based on a singular value decomposition of the signal evolution, magnetic resonance fingerprinting is formulated as a low rank (LR) inverse problem in which one image is reconstructed for each singular value under consideration. This LR approximation of the signal evolution reduces the computational burden by reducing the number of Fourier transformations. Also, the LR approximation improves the conditioning of the problem, which is further improved by extending the LR inverse problem to an augmented Lagrangian that is solved by the alternating direction method of multipliers. The root mean square error and the noise propagation are analyzed in simulations. For verification, in vivo examples are provided. The proposed LR alternating direction method of multipliers approach shows a reduced root mean square error compared to the original fingerprinting reconstruction, to a LR approximation alone and to an alternating direction method of multipliers approach without a LR approximation. Incorporating sensitivity encoding allows for further artifact reduction. The proposed reconstruction provides robust convergence, reduced computational burden and improved image quality compared to other magnetic resonance fingerprinting reconstruction approaches evaluated in this study. Magn Reson Med 79:83-96, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Self-narrative reconstruction in emotion-focused therapy: A preliminary task analysis.

Science.gov (United States)

Cunha, Carla; Mendes, Inês; Ribeiro, António P; Angus, Lynne; Greenberg, Leslie S; Gonçalves, Miguel M

2017-11-01

This research explored the consolidation phase of emotion-focused therapy (EFT) for depression and studies-through a task-analysis method-how client-therapist dyads evolved from the exploration of the problem to self-narrative reconstruction. Innovative moments (IMs) were used to situate the process of self-narrative reconstruction within sessions, particularly through reconceptualization and performing change IMs. We contrasted the observation of these occurrences with a rational model of self-narrative reconstruction, previously built. This study presents the rational model and the revised rational-empirical model of the self-narrative reconstruction task in three EFT dyads, suggesting nine steps necessary for task resolution: (1) Explicit recognition of differences in the present and steps in the path of change; (2) Development of a meta-perspective contrast between present self and past self; (3) Amplification of contrast in the self; (4) A positive appreciation of changes is conveyed; (5) Occurrence of feelings of empowerment, competence, and mastery; (6) Reference to difficulties still present; (7) Emphasis on the loss of centrality of the problem; (8) Perception of change as a gradual, developing process; and (9) Reference to projects, experiences of change, or elaboration of new plans. Central aspects of therapist activity in facilitating the client's progression along these nine steps are also elaborated.

A maximum-likelihood reconstruction algorithm for tomographic gamma-ray nondestructive assay

International Nuclear Information System (INIS)

Prettyman, T.H.; Estep, R.J.; Cole, R.A.; Sheppard, G.A.

1994-01-01

A new tomographic reconstruction algorithm for nondestructive assay with high resolution gamma-ray spectroscopy (HRGS) is presented. The reconstruction problem is formulated using a maximum-likelihood approach in which the statistical structure of both the gross and continuum measurements used to determine the full-energy response in HRGS is precisely modeled. An accelerated expectation-maximization algorithm is used to determine the optimal solution. The algorithm is applied to safeguards and environmental assays of large samples (for example, 55-gal. drums) in which high continuum levels caused by Compton scattering are routinely encountered. Details of the implementation of the algorithm and a comparative study of the algorithm's performance are presented

Generalized Fourier slice theorem for cone-beam image reconstruction.

Science.gov (United States)

Zhao, Shuang-Ren; Jiang, Dazong; Yang, Kevin; Yang, Kang

2015-01-01

The cone-beam reconstruction theory has been proposed by Kirillov in 1961, Tuy in 1983, Feldkamp in 1984, Smith in 1985, Pierre Grangeat in 1990. The Fourier slice theorem is proposed by Bracewell 1956, which leads to the Fourier image reconstruction method for parallel-beam geometry. The Fourier slice theorem is extended to fan-beam geometry by Zhao in 1993 and 1995. By combining the above mentioned cone-beam image reconstruction theory and the above mentioned Fourier slice theory of fan-beam geometry, the Fourier slice theorem in cone-beam geometry is proposed by Zhao 1995 in short conference publication. This article offers the details of the derivation and implementation of this Fourier slice theorem for cone-beam geometry. Especially the problem of the reconstruction from Fourier domain has been overcome, which is that the value of in the origin of Fourier space is 0/0. The 0/0 type of limit is proper handled. As examples, the implementation results for the single circle and two perpendicular circle source orbits are shown. In the cone-beam reconstruction if a interpolation process is considered, the number of the calculations for the generalized Fourier slice theorem algorithm is O(N^4), which is close to the filtered back-projection method, here N is the image size of 1-dimension. However the interpolation process can be avoid, in that case the number of the calculations is O(N5).

Emergency situations; Les situations d'urgence

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The nuclear activities are exercised so as to prevent the accidents. They are subjected to a rule whom application is controlled by the Asn. The risk of grave accident is so limited to a very low level of probability. He cannot be however completely pushed aside. The expression ' radiological emergency situation ' indicates a situation which ensues from an incident or of an accident risking to lead to an emission of radioactive materials or a level of radioactivity susceptible to strike a blow at the public health. The term ' nuclear crisis ' is used for the events which can lead to a radiological emergency situation on a nuclear basic installation or during a transport of radioactive materials. The preparation and the management of emergency situations, that they are of natural, accidental or terrorist origin, became a major concern of our society. We propose you of to know more about it in this file. (N.C.)

Verifying three-dimensional skull model reconstruction using cranial index of symmetry.

Science.gov (United States)

Kung, Woon-Man; Chen, Shuo-Tsung; Lin, Chung-Hsiang; Lu, Yu-Mei; Chen, Tzu-Hsuan; Lin, Muh-Shi

2013-01-01

Difficulty exists in scalp adaptation for cranioplasty with customized computer-assisted design/manufacturing (CAD/CAM) implant in situations of excessive wound tension and sub-cranioplasty dead space. To solve this clinical problem, the CAD/CAM technique should include algorithms to reconstruct a depressed contour to cover the skull defect. Satisfactory CAM-derived alloplastic implants are based on highly accurate three-dimensional (3-D) CAD modeling. Thus, it is quite important to establish a symmetrically regular CAD/CAM reconstruction prior to depressing the contour. The purpose of this study is to verify the aesthetic outcomes of CAD models with regular contours using cranial index of symmetry (CIS). From January 2011 to June 2012, decompressive craniectomy (DC) was performed for 15 consecutive patients in our institute. 3-D CAD models of skull defects were reconstructed using commercial software. These models were checked in terms of symmetry by CIS scores. CIS scores of CAD reconstructions were 99.24±0.004% (range 98.47-99.84). CIS scores of these CAD models were statistically significantly greater than 95%, identical to 99.5%, but lower than 99.6% (ppairs signed rank test). These data evidenced the highly accurate symmetry of these CAD models with regular contours. CIS calculation is beneficial to assess aesthetic outcomes of CAD-reconstructed skulls in terms of cranial symmetry. This enables further accurate CAD models and CAM cranial implants with depressed contours, which are essential in patients with difficult scalp adaptation.

Characterization and reconstruction of 3D stochastic microstructures via supervised learning.

Science.gov (United States)

Bostanabad, R; Chen, W; Apley, D W

2016-12-01

The need for computational characterization and reconstruction of volumetric maps of stochastic microstructures for understanding the role of material structure in the processing-structure-property chain has been highlighted in the literature. Recently, a promising characterization and reconstruction approach has been developed where the essential idea is to convert the digitized microstructure image into an appropriate training dataset to learn the stochastic nature of the morphology by fitting a supervised learning model to the dataset. This compact model can subsequently be used to efficiently reconstruct as many statistically equivalent microstructure samples as desired. The goal of this paper is to build upon the developed approach in three major directions by: (1) extending the approach to characterize 3D stochastic microstructures and efficiently reconstruct 3D samples, (2) improving the performance of the approach by incorporating user-defined predictors into the supervised learning model, and (3) addressing potential computational issues by introducing a reduced model which can perform as effectively as the full model. We test the extended approach on three examples and show that the spatial dependencies, as evaluated via various measures, are well preserved in the reconstructed samples. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

On-line implant reconstruction in HDR brachytherapy

International Nuclear Information System (INIS)

Kolkman-Deurloo, Inger-Karine K.; Kruijf, Wilhelmus J.M. de; Levendag, Peter C.

2006-01-01

Background and purpose: To evaluate the accuracy of on-line planning in an Integrated Brachytherapy Unit (IBU) using dedicated image distortion correction algorithms, correcting the geometric distortion and magnetic distortion separately, and to determine the effect of the reconstruction accuracy on clinical treatment plans in terms of deviations in treatment time and dose. Patients and methods: The reconstruction accuracy has been measured using 20 markers, positioned at well known locations in a QA phantom. Treatment plans of two phantoms representing clinical implant geometries, have been compared with reference plans to determine the effect of the reconstruction accuracy on the treatment plan. Before clinical introduction, treatment plans of three representative patients, based on on-line reconstruction, have been compared with reference plans. Results: The average reconstruction error for 10 in. images reduces from -0.6 mm (range -2.6 to +1.0 mm) to -0.2 mm (range -1.2 to +0.6 mm) after image distortion correction and for 15 in. images from 0.8 mm (range -0.5 to +3.0 mm) to 0.0 mm (range -0.8 to +0.8 mm). The error in case of eccentric positioning of the phantom, i.e. 0.8 mm (range -1.0 to +3.3 mm), reduces to 0.1 mm (range -0.5 to +0.9 mm). Correction of the image distortions reduces the deviation in the calculated treatment time of maximally 2.7% to less than 0.8% in case of eccentrically positioned clinical phantoms. The deviation in the treatment time or reference dose in the plans based on on-line reconstruction with image distortion correction of the three patient examples is smaller than 0.3%. Conclusions: Accurate on-line implant reconstruction using the IBU localiser and dedicated correction algorithms separating the geometric distortion and the magnetic distortion is possible. The results fulfill the minimum requirements as imposed by the Netherlands Commission on Radiation Dosimetry (NCS) without limitations regarding the usable range of the field

Diffusion archeology for diffusion progression history reconstruction.

Science.gov (United States)

Sefer, Emre; Kingsford, Carl

2016-11-01

Diffusion through graphs can be used to model many real-world processes, such as the spread of diseases, social network memes, computer viruses, or water contaminants. Often, a real-world diffusion cannot be directly observed while it is occurring - perhaps it is not noticed until some time has passed, continuous monitoring is too costly, or privacy concerns limit data access. This leads to the need to reconstruct how the present state of the diffusion came to be from partial diffusion data. Here, we tackle the problem of reconstructing a diffusion history from one or more snapshots of the diffusion state. This ability can be invaluable to learn when certain computer nodes are infected or which people are the initial disease spreaders to control future diffusions. We formulate this problem over discrete-time SEIRS-type diffusion models in terms of maximum likelihood. We design methods that are based on submodularity and a novel prize-collecting dominating-set vertex cover (PCDSVC) relaxation that can identify likely diffusion steps with some provable performance guarantees. Our methods are the first to be able to reconstruct complete diffusion histories accurately in real and simulated situations. As a special case, they can also identify the initial spreaders better than the existing methods for that problem. Our results for both meme and contaminant diffusion show that the partial diffusion data problem can be overcome with proper modeling and methods, and that hidden temporal characteristics of diffusion can be predicted from limited data.

Latissimus-sparing thoracotomy in the pediatric patient: a valuable asset for thoracic reconstruction.

Science.gov (United States)

Malczewski, M C; Colony, L; Cobb, L M

1994-03-01

The traditional posterolateral thoracotomy involves division of the latissimus dorsi muscle (LD). While the division results in no functional disability, it does negate the potential for possible future thoracic reconstruction if required in individual cases (eg, bronchopleural fistula, empyema, etc). A latissimus-sparing thoracotomy (LST) mobilizes the muscle dorsad and does not compromise the operation. Thus, the ipsilateral LD can be used when chest wall reconstruction is required. This option has been used frequently for adults; however, its use in children has not been extensively documented. Microvascular anastomoses for a contralateral LD free-flap may be tenuous in the small vessels of the child; thus, reconstruction using the ipsilateral LD could be beneficial and safer. The feasibility of LST has not been established with regard to the chest of the child. The authors present three pediatric thoracic cases that illustrate the value of this procedure, and discuss different situations in which latissimus-sparing thoracotomy is advantageous.

Piezoelectric array elements for sound reconstruction with a digital input

KAUST Repository

Carreno, Armando Arpys Arevalo

2016-10-13

Various examples are provided for digital sound reconstruction using piezoelectric array elements. In one example, a digital loudspeaker includes a fixed frame and an array of transducers disposed on the fixed frame. Individual transducers of the array of transducers can include a flexible membrane disposed on a piezoelectric actuation element positioned over a corresponding opening that extends through the fixed frame. In another example, a method includes forming a flexible membrane structure on a substrate and backetching the substrate opposite the flexible membrane structure. The flexible membrane structure can be formed by disposing a first electrode layer on a substrate, disposing a piezoelectric layer on the first electrode layer and disposing a second electrode layer on the piezoelectric layer. A flexible membrane layer (e.g., polyimide) can be disposed on the second electrode layer.

Piezoelectric array elements for sound reconstruction with a digital input

KAUST Repository

Carreno, Armando Arpys Arevalo; Gonzalez, David Conchouso; Signoret, David Castro; Foulds, Ian G.

2016-01-01

Various examples are provided for digital sound reconstruction using piezoelectric array elements. In one example, a digital loudspeaker includes a fixed frame and an array of transducers disposed on the fixed frame. Individual transducers of the array of transducers can include a flexible membrane disposed on a piezoelectric actuation element positioned over a corresponding opening that extends through the fixed frame. In another example, a method includes forming a flexible membrane structure on a substrate and backetching the substrate opposite the flexible membrane structure. The flexible membrane structure can be formed by disposing a first electrode layer on a substrate, disposing a piezoelectric layer on the first electrode layer and disposing a second electrode layer on the piezoelectric layer. A flexible membrane layer (e.g., polyimide) can be disposed on the second electrode layer.

Application of Symmetry Adapted Function Method for Three-Dimensional Reconstruction of Octahedral Biological Macromolecules

Directory of Open Access Journals (Sweden)

Songjun Zeng

2010-01-01

Full Text Available A method for three-dimensional (3D reconstruction of macromolecule assembles, that is, octahedral symmetrical adapted functions (OSAFs method, was introduced in this paper and a series of formulations for reconstruction by OSAF method were derived. To verify the feasibility and advantages of the method, two octahedral symmetrical macromolecules, that is, heat shock protein Degp24 and the Red-cell L Ferritin, were utilized as examples to implement reconstruction by the OSAF method. The schedule for simulation was designed as follows: 2000 random orientated projections of single particles with predefined Euler angles and centers of origins were generated, then different levels of noises that is signal-to-noise ratio (S/N =0.1,0.5, and 0.8 were added. The structures reconstructed by the OSAF method were in good agreement with the standard models and the relative errors of the structures reconstructed by the OSAF method to standard structures were very little even for high level noise. The facts mentioned above account for that the OSAF method is feasible and efficient approach to reconstruct structures of macromolecules and have ability to suppress the influence of noise.

[Euthanasia 2002-2014: The situation in Belgium].

Science.gov (United States)

Lossignol, D

2016-10-01

Since 2002, Belgian law has authorized the practice of euthanasia under certain clear conditions. All cases have to be reported to the Assessment and Control Commission (ACC). To date, more than 9000 cases have been reported. To make a statement about the Belgian experience requires consideration of several different essential points: detailed data and information from the ACC reports, their analysis, consequences on medical practice, problems experienced, legal and medical perspectives, criticism and attacks. The concept of individual and institutional conscience is also considered. Euthanasia for minors has been permitted since March 2014 but, to date, no case has been reported. In the light of what has happened in Belgium, we propose to analyse the legal situation in France. The Belgian experience is much more than an example and shows that, in difficult and painful situations, it is possible to meet the expectations of patients experiencing intolerable suffering with great respect and without imposing dogmatically something they do not wish. Copyright © 2015 SPLF. Published by Elsevier Masson SAS. All rights reserved.

Game Strategies of Ship in the Collision Situations

Directory of Open Access Journals (Sweden)

Jozef Lisowski

2014-03-01

Full Text Available The paper introduced the basic model of process of safe ship control in a collision situation using a game model with j objects, which includes non-linear state equations and non-linear, time varying constraints of the state variables as well as the quality game control index in the forms of the game integral payment and the final payment. Approximated model of the process control as the model of multi-step matrix game in the form of dual linear programming problem has been adopted here. The Game Ship Control GSC computer program has been designed in the Matlab/Simulink software in order to determine the own ship's safe trajectory. These considerations have been illustrated with examples of a computer simulation using an GSC program for determining the safe ship's trajectory in real navigational situation. Simulation research were passed for five sets of strategies of the own ship and met ships.

Virtual reconstruction of modern and fossil hominoid crania: consequences of reference sample choice.

Science.gov (United States)

Senck, Sascha; Bookstein, Fred L; Benazzi, Stefano; Kastner, Johann; Weber, Gerhard W

2015-05-01

Most hominin cranial fossils are incomplete and require reconstruction prior to subsequent analyses. Missing data can be estimated by geometric morphometrics using information from complete specimens, for example, by using thin-plate splines. In this study, we estimate missing data in several virtually fragmented models of hominoid crania (Homo, Pan, Pongo) and fossil hominins (e.g., Australopithecus africanus, Homo heidelbergensis). The aim is to investigate in which way different references influence estimations of cranial shape and how this information can be employed in the reconstruction of fossils. We used a sample of 64 three-dimensional digital models of complete human, chimpanzee, and orangutan crania and a set of 758 landmarks and semilandmarks. The virtually knocked out neurocranial and facial areas that were reconstructed corresponded to those of a real case found in A.L. 444-2 (A. afarensis) cranium. Accuracy of multiple intraspecies and interspecies reconstructions was computed as the maximum square root of the mean squared difference between the original and the reconstruction (root mean square). The results show that the uncertainty in reconstructions is a function of both the geometry of the knockout area and the dissimilarity between the reference sample and the specimen(s) undergoing reconstruction. We suggest that it is possible to estimate large missing cranial areas if the shape of the reference is similar enough to the shape of the specimen reconstructed, though caution must be exercised when employing these reconstructions in subsequent analyses. We provide a potential guide for the choice of the reference by means of bending energy. © 2015 Wiley Periodicals, Inc.

Calibration-free quantitative surface topography reconstruction in scanning electron microscopy.

Science.gov (United States)

Faber, E T; Martinez-Martinez, D; Mansilla, C; Ocelík, V; Hosson, J Th M De

2015-01-01

This work presents a new approach to obtain reliable surface topography reconstructions from 2D Scanning Electron Microscopy (SEM) images. In this method a set of images taken at different tilt angles are compared by means of digital image correlation (DIC). It is argued that the strength of the method lies in the fact that precise knowledge about the nature of the rotation (vector and/or magnitude) is not needed. Therefore, the great advantage is that complex calibrations of the measuring equipment are avoided. The paper presents the necessary equations involved in the methods, including derivations and solutions. The method is illustrated with examples of 3D reconstructions followed by a discussion on the relevant experimental parameters. Copyright © 2014 Elsevier B.V. All rights reserved.

Worked Examples with Errors: When Self-Explanation Prompts Hinder Learning of Teachers Diagnostic Competences on Problem-Based Learning

Science.gov (United States)

Heitzmann, Nicole; Fischer, Frank; Fischer, Martin R.

2018-01-01

To diagnose classroom situations is crucial for teachers' everyday practice. The approach of worked examples with errors seems promising to support the diagnosis of classroom situations in student teachers (Stark et al. in "Learn Instr" 21(1):22-33, 2011). To enhance that approach, error-explanation prompts and an adaptable feedback…

Biomechanical Reconstruction Using the Tacit Learning System: Intuitive Control of Prosthetic Hand Rotation.

Science.gov (United States)

Oyama, Shintaro; Shimoda, Shingo; Alnajjar, Fady S K; Iwatsuki, Katsuyuki; Hoshiyama, Minoru; Tanaka, Hirotaka; Hirata, Hitoshi

2016-01-01

Background: For mechanically reconstructing human biomechanical function, intuitive proportional control, and robustness to unexpected situations are required. Particularly, creating a functional hand prosthesis is a typical challenge in the reconstruction of lost biomechanical function. Nevertheless, currently available control algorithms are in the development phase. The most advanced algorithms for controlling multifunctional prosthesis are machine learning and pattern recognition of myoelectric signals. Despite the increase in computational speed, these methods cannot avoid the requirement of user consciousness and classified separation errors. "Tacit Learning System" is a simple but novel adaptive control strategy that can self-adapt its posture to environment changes. We introduced the strategy in the prosthesis rotation control to achieve compensatory reduction, as well as evaluated the system and its effects on the user. Methods: We conducted a non-randomized study involving eight prosthesis users to perform a bar relocation task with/without Tacit Learning System support. Hand piece and body motions were recorded continuously with goniometers, videos, and a motion-capture system. Findings: Reduction in the participants' upper extremity rotatory compensation motion was monitored during the relocation task in all participants. The estimated profile of total body energy consumption improved in five out of six participants. Interpretation: Our system rapidly accomplished nearly natural motion without unexpected errors. The Tacit Learning System not only adapts human motions but also enhances the human ability to adapt to the system quickly, while the system amplifies compensation generated by the residual limb. The concept can be extended to various situations for reconstructing lost functions that can be compensated.

Linear image reconstruction for a diffuse optical mammography system in a noncompressed geometry using scattering fluid

International Nuclear Information System (INIS)

Nielsen, Tim; Brendel, Bernhard; Ziegler, Ronny; Beek, Michiel van; Uhlemann, Falk; Bontus, Claas; Koehler, Thomas

2009-01-01

Diffuse optical tomography (DOT) is a potential new imaging modality to detect or monitor breast lesions. Recently, Philips developed a new DOT system capable of transmission and fluorescence imaging, where the investigated breast is hanging freely into the measurement cup containing scattering fluid. We present a fast and robust image reconstruction algorithm that is used for the transmission measurements. The algorithm is based on the Rytov approximation. We show that this algorithm can be used over a wide range of tissue optical properties if the reconstruction is adapted to each patient. We use estimates of the breast shape and average tissue optical properties to initialize the reconstruction, which improves the image quality significantly. We demonstrate the capability of the measurement system and reconstruction to image breast lesions by clinical examples

Single-spin stochastic optical reconstruction microscopy.

Science.gov (United States)

Pfender, Matthias; Aslam, Nabeel; Waldherr, Gerald; Neumann, Philipp; Wrachtrup, Jörg

2014-10-14

We experimentally demonstrate precision addressing of single-quantum emitters by combined optical microscopy and spin resonance techniques. To this end, we use nitrogen vacancy (NV) color centers in diamond confined within a few ten nanometers as individually resolvable quantum systems. By developing a stochastic optical reconstruction microscopy (STORM) technique for NV centers, we are able to simultaneously perform sub-diffraction-limit imaging and optically detected spin resonance (ODMR) measurements on NV spins. This allows the assignment of spin resonance spectra to individual NV center locations with nanometer-scale resolution and thus further improves spatial discrimination. For example, we resolved formerly indistinguishable emitters by their spectra. Furthermore, ODMR spectra contain metrology information allowing for sub-diffraction-limit sensing of, for instance, magnetic or electric fields with inherently parallel data acquisition. As an example, we have detected nuclear spins with nanometer-scale precision. Finally, we give prospects of how this technique can evolve into a fully parallel quantum sensor for nanometer resolution imaging of delocalized quantum correlations.

Algebraic reconstruction techniques for spectral reconstruction in diffuse optical tomography

International Nuclear Information System (INIS)

Brendel, Bernhard; Ziegler, Ronny; Nielsen, Tim

2008-01-01

Reconstruction in diffuse optical tomography (DOT) necessitates solving the diffusion equation, which is nonlinear with respect to the parameters that have to be reconstructed. Currently applied solving methods are based on the linearization of the equation. For spectral three-dimensional reconstruction, the emerging equation system is too large for direct inversion, but the application of iterative methods is feasible. Computational effort and speed of convergence of these iterative methods are crucial since they determine the computation time of the reconstruction. In this paper, the iterative methods algebraic reconstruction technique (ART) and conjugated gradients (CGs) as well as a new modified ART method are investigated for spectral DOT reconstruction. The aim of the modified ART scheme is to speed up the convergence by considering the specific conditions of spectral reconstruction. As a result, it converges much faster to favorable results than conventional ART and CG methods

Study of the mode of angular velocity damping for a spacecraft at non-standard situation

Science.gov (United States)

Davydov, A. A.; Sazonov, V. V.

2012-07-01

Non-standard situation on a spacecraft (Earth's satellite) is considered, when there are no measurements of the spacecraft's angular velocity component relative to one of its body axes. Angular velocity measurements are used in controlling spacecraft's attitude motion by means of flywheels. The arising problem is to study the operation of standard control algorithms in the absence of some necessary measurements. In this work this problem is solved for the algorithm ensuring the damping of spacecraft's angular velocity. Such a damping is shown to be possible not for all initial conditions of motion. In the general case one of two possible final modes is realized, each described by stable steady-state solutions of the equations of motion. In one of them, the spacecraft's angular velocity component relative to the axis, for which the measurements are absent, is nonzero. The estimates of the regions of attraction are obtained for these steady-state solutions by numerical calculations. A simple technique is suggested that allows one to eliminate the initial conditions of the angular velocity damping mode from the attraction region of an undesirable solution. Several realizations of this mode that have taken place are reconstructed. This reconstruction was carried out using approximations of telemetry values of the angular velocity components and the total angular momentum of flywheels, obtained at the non-standard situation, by solutions of the equations of spacecraft's rotational motion.

Retrospective reconstruction of personal doses using mobile phones

International Nuclear Information System (INIS)

Ekendahl, Daniela

2011-01-01

Mobile phones are among objects usable for retrospective reconstruction of doses received by persons irradiated from serious radiation accidents or terrorist acts involving radioactivity. In this respect, it is an advantage of mobile phones that they are often worn close to the body and are used by the majority of population. Like other portable electronic devices, mobile phones contain electronic components which can include ceramic materials exhibiting radiation induced luminescence. Aluminium oxide (Al2O3) is an example; its layers are often used in chip resistors. This work summarizes the results of a pilot study investigating the dosimetric potential of Al2O3 measured via thermoluminescence (TL) and optically stimulated luminescence (OSL). A trial dose reconstruction performed with two mobile phones is described. It is shown that the material exhibits favourable dosimetric properties and the method is sufficiently accurate and operative for personal accident dosimetry purposes. (orig.)

Research on Image Reconstruction Algorithms for Tuber Electrical Resistance Tomography System

Directory of Open Access Journals (Sweden)

Jiang Zili

2016-01-01

Full Text Available The application of electrical resistance tomography (ERT technology has been expanded to the field of agriculture, and the concept of TERT (Tuber Electrical Resistance Tomography is proposed. On the basis of the research on the forward and the inverse problems of the TERT system, a hybrid algorithm based on genetic algorithm is proposed, which can be used in TERT system to monitor the growth status of the plant tubers. The image reconstruction of TERT system is different from the conventional ERT system for two phase-flow measurement. Imaging of TERT needs more precision measurement and the conventional ERT cares more about the image reconstruction speed. A variety of algorithms are analyzed and optimized for the purpose of making them suitable for TERT system. For example: linear back projection, modified Newton-Raphson and genetic algorithm. Experimental results showed that the novel hybrid algorithm is superior to other algorithm and it can effectively improve the image reconstruction quality.

Reconstructing an economic space from a market metric

OpenAIRE

Mendes, R. Vilela; Araújo, Tanya; Louçã, Francisco

2002-01-01

Using a metric related to the returns correlation, a method is proposed to reconstruct an economic space from the market data. A reduced subspace, associated to the systematic structure of the market, is identified and its dimension related to the number of terms in factor models. Example were worked out involving sets of companies from the DJIA and S&P500 indexes. Having a metric defined in the space of companies, network topology coefficients may be used to extract further information from ...

Cooperative and Non-Cooperative Game Control Strategies of the Ship in Collision Situation

Directory of Open Access Journals (Sweden)

Jozef Lisowski

2018-03-01

Full Text Available The paper introduces the positional cooperative and non-cooperative game of a greater number of met ships for the description of the process considered as well as for the synthesis of optimal control strategies of the own ship in collision situation. The approximated mathematical model of differential game in the form of triple linear programming problem is used for the synthesis of safe ship trajectory as a multistage process decision. The considerations have been illustrated an example of program computer simulation to determine the safe ship trajectories in situation of passing a many of the ships encountered.

Ancestral state reconstruction, rate heterogeneity, and the evolution of reptile viviparity.

Science.gov (United States)

King, Benedict; Lee, Michael S Y

2015-05-01

Virtually all models for reconstructing ancestral states for discrete characters make the crucial assumption that the trait of interest evolves at a uniform rate across the entire tree. However, this assumption is unlikely to hold in many situations, particularly as ancestral state reconstructions are being performed on increasingly large phylogenies. Here, we show how failure to account for such variable evolutionary rates can cause highly anomalous (and likely incorrect) results, while three methods that accommodate rate variability yield the opposite, more plausible, and more robust reconstructions. The random local clock method, implemented in BEAST, estimates the position and magnitude of rate changes on the tree; split BiSSE estimates separate rate parameters for pre-specified clades; and the hidden rates model partitions each character state into a number of rate categories. Simulations show the inadequacy of traditional models when characters evolve with both asymmetry (different rates of change between states within a character) and heterotachy (different rates of character evolution across different clades). The importance of accounting for rate heterogeneity in ancestral state reconstruction is highlighted empirically with a new analysis of the evolution of viviparity in squamate reptiles, which reveal a predominance of forward (oviparous-viviparous) transitions and very few reversals. © The Author(s) 2015. Published by Oxford University Press, on behalf of the Society of Systematic Biologists. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

MO-DE-207A-07: Filtered Iterative Reconstruction (FIR) Via Proximal Forward-Backward Splitting: A Synergy of Analytical and Iterative Reconstruction Method for CT

International Nuclear Information System (INIS)

Gao, H

2016-01-01

Purpose: This work is to develop a general framework, namely filtered iterative reconstruction (FIR) method, to incorporate analytical reconstruction (AR) method into iterative reconstruction (IR) method, for enhanced CT image quality. Methods: FIR is formulated as a combination of filtered data fidelity and sparsity regularization, and then solved by proximal forward-backward splitting (PFBS) algorithm. As a result, the image reconstruction decouples data fidelity and image regularization with a two-step iterative scheme, during which an AR-projection step updates the filtered data fidelity term, while a denoising solver updates the sparsity regularization term. During the AR-projection step, the image is projected to the data domain to form the data residual, and then reconstructed by certain AR to a residual image which is in turn weighted together with previous image iterate to form next image iterate. Since the eigenvalues of AR-projection operator are close to the unity, PFBS based FIR has a fast convergence. Results: The proposed FIR method is validated in the setting of circular cone-beam CT with AR being FDK and total-variation sparsity regularization, and has improved image quality from both AR and IR. For example, AIR has improved visual assessment and quantitative measurement in terms of both contrast and resolution, and reduced axial and half-fan artifacts. Conclusion: FIR is proposed to incorporate AR into IR, with an efficient image reconstruction algorithm based on PFBS. The CBCT results suggest that FIR synergizes AR and IR with improved image quality and reduced axial and half-fan artifacts. The authors was partially supported by the NSFC (#11405105), the 973 Program (#2015CB856000), and the Shanghai Pujiang Talent Program (#14PJ1404500).

Practices of Built Heritage Post-Disaster Reconstruction for Resilient Cities

Directory of Open Access Journals (Sweden)

Tomasz Jeleński

2018-03-01

Full Text Available The concept of resilience has become increasingly important to our understanding of sustainable planning. Post-disaster urban and architectural reconstruction might be treated as a strategy for resilient cities, helping them to reinvent themselves after possible destruction. The purpose of this study is to analyse several cases of nearly total reconstruction of historical urban complexes. Specifically, it explores how urban heritage conservation and recreation could contribute to the resilience agenda, giving traumatised societies a sense of continuity and localness. It analyses the changes in the conservation doctrine, highlighting the growing acceptance of architectural reconstructions. Drawing on historical examples, mainly derived from the Polish School of Conservation practice, this paper argues that the methods and processes attempted to regain identity for the thoroughly rebuilt structures proved effective in recreating the identity of such cities as Kalisz, Warsaw, Gdańsk, and Wrocław. The article argues that while processes at the governmental level emphasised the strengthening of national identity, the experiences of the reconstructed townscapes eventually involved forms of more diverse municipal identities. The article highlights that the strategy of recreating traditional images of cities after their mutilation in disastrous events might be a key to becoming a more resilient city and the formation of the post-disaster citizenry.

Continuous analog of multiplicative algebraic reconstruction technique for computed tomography

Science.gov (United States)

Tateishi, Kiyoko; Yamaguchi, Yusaku; Abou Al-Ola, Omar M.; Kojima, Takeshi; Yoshinaga, Tetsuya

2016-03-01

We propose a hybrid dynamical system as a continuous analog to the block-iterative multiplicative algebraic reconstruction technique (BI-MART), which is a well-known iterative image reconstruction algorithm for computed tomography. The hybrid system is described by a switched nonlinear system with a piecewise smooth vector field or differential equation and, for consistent inverse problems, the convergence of non-negatively constrained solutions to a globally stable equilibrium is guaranteed by the Lyapunov theorem. Namely, we can prove theoretically that a weighted Kullback-Leibler divergence measure can be a common Lyapunov function for the switched system. We show that discretizing the differential equation by using the first-order approximation (Euler's method) based on the geometric multiplicative calculus leads to the same iterative formula of the BI-MART with the scaling parameter as a time-step of numerical discretization. The present paper is the first to reveal that a kind of iterative image reconstruction algorithm is constructed by the discretization of a continuous-time dynamical system for solving tomographic inverse problems. Iterative algorithms with not only the Euler method but also the Runge-Kutta methods of lower-orders applied for discretizing the continuous-time system can be used for image reconstruction. A numerical example showing the characteristics of the discretized iterative methods is presented.

Theoretical Coalescence: A Method to Develop Qualitative Theory: The Example of Enduring.

Science.gov (United States)

Morse, Janice M

Qualitative research is frequently context bound, lacks generalizability, and is limited in scope. The purpose of this article was to describe a method, theoretical coalescence, that provides a strategy for analyzing complex, high-level concepts and for developing generalizable theory. Theoretical coalescence is a method of theoretical expansion, inductive inquiry, of theory development, that uses data (rather than themes, categories, and published extracts of data) as the primary source for analysis. Here, using the development of the lay concept of enduring as an example, I explore the scientific development of the concept in multiple settings over many projects and link it within the Praxis Theory of Suffering. As comprehension emerges when conducting theoretical coalescence, it is essential that raw data from various different situations be available for reinterpretation/reanalysis and comparison to identify the essential features of the concept. The concept is then reconstructed, with additional inquiry that builds description, and evidence is conducted and conceptualized to create a more expansive concept and theory. By utilizing apparently diverse data sets from different contexts that are linked by certain characteristics, the essential features of the concept emerge. Such inquiry is divergent and less bound by context yet purposeful, logical, and with significant pragmatic implications for practice in nursing and beyond our discipline. Theoretical coalescence is a means by which qualitative inquiry is broadened to make an impact, to accommodate new theoretical shifts and concepts, and to make qualitative research applied and accessible in new ways.

A low error reconstruction method for confocal holography to determine 3-dimensional properties

Energy Technology Data Exchange (ETDEWEB)

Jacquemin, P.B., E-mail: pbjacque@nps.edu [Mechanical Engineering, University of Victoria, EOW 548,800 Finnerty Road, Victoria, BC (Canada); Herring, R.A. [Mechanical Engineering, University of Victoria, EOW 548,800 Finnerty Road, Victoria, BC (Canada)

2012-06-15

A confocal holography microscope developed at the University of Victoria uniquely combines holography with a scanning confocal microscope to non-intrusively measure fluid temperatures in three-dimensions (Herring, 1997), (Abe and Iwasaki, 1999), (Jacquemin et al., 2005). The Confocal Scanning Laser Holography (CSLH) microscope was built and tested to verify the concept of 3D temperature reconstruction from scanned holograms. The CSLH microscope used a focused laser to non-intrusively probe a heated fluid specimen. The focused beam probed the specimen instead of a collimated beam in order to obtain different phase-shift data for each scan position. A collimated beam produced the same information for scanning along the optical propagation z-axis. No rotational scanning mechanisms were used in the CSLH microscope which restricted the scan angle to the cone angle of the probe beam. Limited viewing angle scanning from a single view point window produced a challenge for tomographic 3D reconstruction. The reconstruction matrices were either singular or ill-conditioned making reconstruction with significant error or impossible. Establishing boundary conditions with a particular scanning geometry resulted in a method of reconstruction with low error referred to as 'wily'. The wily reconstruction method can be applied to microscopy situations requiring 3D imaging where there is a single viewpoint window, a probe beam with high numerical aperture, and specified boundary conditions for the specimen. The issues and progress of the wily algorithm for the CSLH microscope are reported herein. -- Highlights: Black-Right-Pointing-Pointer Evaluation of an optical confocal holography device to measure 3D temperature of a heated fluid. Black-Right-Pointing-Pointer Processing of multiple holograms containing the cumulative refractive index through the fluid. Black-Right-Pointing-Pointer Reconstruction issues due to restricting angular scanning to the numerical aperture of the

A low error reconstruction method for confocal holography to determine 3-dimensional properties

International Nuclear Information System (INIS)

Jacquemin, P.B.; Herring, R.A.

2012-01-01

A confocal holography microscope developed at the University of Victoria uniquely combines holography with a scanning confocal microscope to non-intrusively measure fluid temperatures in three-dimensions (Herring, 1997), (Abe and Iwasaki, 1999), (Jacquemin et al., 2005). The Confocal Scanning Laser Holography (CSLH) microscope was built and tested to verify the concept of 3D temperature reconstruction from scanned holograms. The CSLH microscope used a focused laser to non-intrusively probe a heated fluid specimen. The focused beam probed the specimen instead of a collimated beam in order to obtain different phase-shift data for each scan position. A collimated beam produced the same information for scanning along the optical propagation z-axis. No rotational scanning mechanisms were used in the CSLH microscope which restricted the scan angle to the cone angle of the probe beam. Limited viewing angle scanning from a single view point window produced a challenge for tomographic 3D reconstruction. The reconstruction matrices were either singular or ill-conditioned making reconstruction with significant error or impossible. Establishing boundary conditions with a particular scanning geometry resulted in a method of reconstruction with low error referred to as “wily”. The wily reconstruction method can be applied to microscopy situations requiring 3D imaging where there is a single viewpoint window, a probe beam with high numerical aperture, and specified boundary conditions for the specimen. The issues and progress of the wily algorithm for the CSLH microscope are reported herein. -- Highlights: ► Evaluation of an optical confocal holography device to measure 3D temperature of a heated fluid. ► Processing of multiple holograms containing the cumulative refractive index through the fluid. ► Reconstruction issues due to restricting angular scanning to the numerical aperture of the beam. ► Minimizing tomographic reconstruction error by defining boundary

Comparative assessment of passive surveillance in disease-free and endemic situation: Example of Brucella melitensis surveillance in Switzerland and in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Haracic Sabina

2008-12-01

Full Text Available Abstract Background Globalization and subsequent growth in international trade in animals and animal products has increased the importance of international disease reporting. Efficient and reliable surveillance systems are needed in order to document the disease status of a population at a given time. In this context, passive surveillance plays an important role in early warning systems. However, it is not yet routinely integrated in the assessment of disease surveillance systems because different factors like the disease awareness (DA of people reporting suspect cases influence the detection performance of passive surveillance. In this paper, we used scenario tree methodology in order to evaluate and compare the quality and benefit of abortion testing (ABT for Brucella melitensis (Bm between the disease free situation in Switzerland (CH and a hypothetical disease free situation in Bosnia and Herzegovina (BH, taking into account DA levels assumed for the current endemic situation in BH. Results The structure and input parameters of the scenario tree were identical for CH and BH with the exception of population data in small ruminants and the DA in farmers and veterinarians. The sensitivity analysis of the stochastic scenario tree model showed that the small ruminant population structure and the DA of farmers were important influential parameters with regard to the unit sensitivity of ABT in both CH and BH. The DA of both farmers and veterinarians was assumed to be higher in BH than in CH due to the current endemic situation in BH. Although the same DA cannot necessarily be assumed for the modelled hypothetical disease free situation as for the actual endemic situation, it shows the importance of the higher vigilance of people reporting suspect cases on the probability that an average unit processed in the ABT-component would test positive. Conclusion The actual sensitivity of passive surveillance approaches heavily depends on the context in

Conceptualising forensic science and forensic reconstruction. Part I: A conceptual model.

Science.gov (United States)

Morgan, R M

2017-11-01

There has been a call for forensic science to actively return to the approach of scientific endeavour. The importance of incorporating an awareness of the requirements of the law in its broadest sense, and embedding research into both practice and policy within forensic science, is arguably critical to achieving such an endeavour. This paper presents a conceptual model (FoRTE) that outlines the holistic nature of trace evidence in the 'endeavour' of forensic reconstruction. This model offers insights into the different components intrinsic to transparent, reproducible and robust reconstructions in forensic science. The importance of situating evidence within the whole forensic science process (from crime scene to court), of developing evidence bases to underpin each stage, of frameworks that offer insights to the interaction of different lines of evidence, and the role of expertise in decision making are presented and their interactions identified. It is argued that such a conceptual model has value in identifying the future steps for harnessing the value of trace evidence in forensic reconstruction. It also highlights that there is a need to develop a nuanced approach to reconstructions that incorporates both empirical evidence bases and expertise. A conceptual understanding has the potential to ensure that the endeavour of forensic reconstruction has its roots in 'problem-solving' science, and can offer transparency and clarity in the conclusions and inferences drawn from trace evidence, thereby enabling the value of trace evidence to be realised in investigations and the courts. Copyright © 2017 The Author. Published by Elsevier B.V. All rights reserved.

Sensory Media: Multidisciplinary Approaches in Designing a Situated & Mobile Learning Environment for Past Topics

Directory of Open Access Journals (Sweden)

Terje Rasmussen

2012-07-01

Full Text Available Handheld digital devices are rapidly increasing their sensory capabilities for registering multiple types of input, such as movement, orientation, position and touch, as well as light and sound. Mobile Augmented Rreality is one of the emerging forms of representation and expression that exploits these sensory media. In the following text we will present and discuss a type of indirect augmented reality, which we call situated simulations. In a situated simulation there is approximate identity between the 3D environment displayed on the screen and the user's real perspective on a given location. This makes it possible to create simulations of relevant objects and environments related to a specific place, for example, interpretations of its past. We present a situated simulation

Situating interventions to bridge the intention-behaviour gap: A framework for recruiting nonconscious processes for behaviour change

OpenAIRE

Papies, Esther K.

2017-01-01

This paper presents a situated cognition framework for creating social psychological interventions to bridge the intention–behaviour gap and illustrates this framework by reviewing examples from the domains of health behaviour, environmental behaviour, stereotyping, and aggression. A recurrent problem in behaviour change is the fact that often, intentions are not translated into behaviour, causing the so-called intention–behaviour gap. Here, it is argued that this happens when situational cue...

On artefact-free reconstruction of low-energy (30–250 eV) electron holograms

Energy Technology Data Exchange (ETDEWEB)

Latychevskaia, Tatiana, E-mail: tatiana@physik.uzh.ch; Longchamp, Jean-Nicolas; Escher, Conrad; Fink, Hans-Werner

2014-10-15

Low-energy electrons (30–250 eV) have been successfully employed for imaging individual biomolecules. The most simple and elegant design of a low-energy electron microscope for imaging biomolecules is a lensless setup that operates in the holographic mode. In this work we address the problem associated with the reconstruction from the recorded holograms. We discuss the twin image problem intrinsic to inline holography and the problem of the so-called biprism-like effect specific to low-energy electrons. We demonstrate how the presence of the biprism-like effect can be efficiently identified and circumvented. The presented sideband filtering reconstruction method eliminates the twin image and allows for reconstruction despite the biprism-like effect, which we demonstrate on both, simulated and experimental examples. - Highlights: • Radiation damage-free imaging of individual biomolecules. • Elimination of the twin image in inline holograms. • Circumventing biprism-like effect in low-energy electron holograms. • Artefact-free reconstructions of low-energy electron holograms.

On artefact-free reconstruction of low-energy (30–250 eV) electron holograms

International Nuclear Information System (INIS)

Latychevskaia, Tatiana; Longchamp, Jean-Nicolas; Escher, Conrad; Fink, Hans-Werner

2014-01-01

Low-energy electrons (30–250 eV) have been successfully employed for imaging individual biomolecules. The most simple and elegant design of a low-energy electron microscope for imaging biomolecules is a lensless setup that operates in the holographic mode. In this work we address the problem associated with the reconstruction from the recorded holograms. We discuss the twin image problem intrinsic to inline holography and the problem of the so-called biprism-like effect specific to low-energy electrons. We demonstrate how the presence of the biprism-like effect can be efficiently identified and circumvented. The presented sideband filtering reconstruction method eliminates the twin image and allows for reconstruction despite the biprism-like effect, which we demonstrate on both, simulated and experimental examples. - Highlights: • Radiation damage-free imaging of individual biomolecules. • Elimination of the twin image in inline holograms. • Circumventing biprism-like effect in low-energy electron holograms. • Artefact-free reconstructions of low-energy electron holograms

Mapping the Strategic Thinking of Public Relations Managers in a Crisis Situation: An Illustrative Example Using Conjoint Analysis.

Science.gov (United States)

Bronn, Peggy Simcic; Olson, Erik L.

1999-01-01

Illustrates the operationalization of the conjoint analysis multivariate technique for the study of the public relations function within strategic decision making in a crisis situation. Finds that what the theory describes as the strategic way of handling a crisis is also the way each of the managers who were evaluated would prefer to conduct…

Graph-cut based discrete-valued image reconstruction.

Science.gov (United States)

Tuysuzoglu, Ahmet; Karl, W Clem; Stojanovic, Ivana; Castañòn, David; Ünlü, M Selim

2015-05-01

Efficient graph-cut methods have been used with great success for labeling and denoising problems occurring in computer vision. Unfortunately, the presence of linear image mappings has prevented the use of these techniques in most discrete-amplitude image reconstruction problems. In this paper, we develop a graph-cut based framework for the direct solution of discrete amplitude linear image reconstruction problems cast as regularized energy function minimizations. We first analyze the structure of discrete linear inverse problem cost functions to show that the obstacle to the application of graph-cut methods to their solution is the variable mixing caused by the presence of the linear sensing operator. We then propose to use a surrogate energy functional that overcomes the challenges imposed by the sensing operator yet can be utilized efficiently in existing graph-cut frameworks. We use this surrogate energy functional to devise a monotonic iterative algorithm for the solution of discrete valued inverse problems. We first provide experiments using local convolutional operators and show the robustness of the proposed technique to noise and stability to changes in regularization parameter. Then we focus on nonlocal, tomographic examples where we consider limited-angle data problems. We compare our technique with state-of-the-art discrete and continuous image reconstruction techniques. Experiments show that the proposed method outperforms state-of-the-art techniques in challenging scenarios involving discrete valued unknowns.

[The further development of the 3D-MRI reconstruction technic for the head-neck area].

Science.gov (United States)

Grevers, G; Wilimzig, C; Vogl, T; Laub, G

1990-12-01

Twenty-one healthy volunteers and seventeen patients with head and neck lesions were examined with 3D MR imaging since the end of 1988. A new kind of reconstruction mode was used, which shows the structures of the region of interest by overlaying a predetermined window within the three-dimensional reconstruction of the head. Using this mode, the morphology of the lesion could be evaluated more precisely than by using individual two-dimensional slices. With regard to preoperative surgery planning, the previous results were insufficient. With the new development and increased capacity of the MRI-technique and improvement of the reconstruction mode it is now possible to "cut" several slices in different orientations into the head achieving higher resolution of the images. The innovation of the method and its actual clinical value is discussed in the example of a meningioma of the sphenoid which has been examined by both reconstruction modes.

Situated Transgressiveness

DEFF Research Database (Denmark)

Muhr, Sara Louise; Sullivan, Katie Rose; Rich, Craig

2016-01-01

conversations within queer theory, transgender and organization studies by highlighting how situated contexts mediate the political potential of queer bodies at work. By developing the concept ‘situated transgressiveness’, this article challenges notions of transgender as a stable, ideal disruptive category......This study investigates the lived experience of one transwoman, Claire, a public advocate and a manager with client services responsibilities. We examine Claire's story in order to discuss how situated contexts, such as different roles, locales and interactions, shape the way she experiences...

Placement of fin type dental implant in three different surgical situations of alveolar bone

Directory of Open Access Journals (Sweden)

Coen Pramono D

2007-03-01

Full Text Available Three different dental implant placements according to surgical implant bed situations were observed in its bone integration 3 months after dental implant insertion. This observation was done on implant system which has plateau or fin system. Elf implants were placed in the upper jaw in two patients. In case one, two implants were inserted immediately after tooth extraction, and the other six implants were placed in the alveolar crest regions in delayed implantation or in which the teeth had been extracted over 6 months of period. In case two, three implants were inserted in the post trauma region in the anterior maxilla, which the labial plate had been lost and reconstructed with bone grafting procedure using a mixture of alloplastic and autogenous bones. The alveolar reconstruction was needed to be performed due to only thin alveolar crest width was left intact. All of those implants observed showed in good integration.

Mesh-free free-form lensing - I. Methodology and application to mass reconstruction

Science.gov (United States)

Merten, Julian

2016-09-01

Many applications and algorithms in the field of gravitational lensing make use of meshes with a finite number of nodes to analyse and manipulate data. Specific examples in lensing are astronomical CCD images in general, the reconstruction of density distributions from lensing data, lens-source plane mapping or the characterization and interpolation of a point spread function. We present a numerical framework to interpolate and differentiate in the mesh-free domain, defined by nodes with coordinates that follow no regular pattern. The framework is based on radial basis functions (RBFs) to smoothly represent data around the nodes. We demonstrate the performance of Gaussian RBF-based, mesh-free interpolation and differentiation, which reaches the sub-percent level in both cases. We use our newly developed framework to translate ideas of free-form mass reconstruction from lensing on to the mesh-free domain. By reconstructing a simulated mock lens we find that strong-lensing only reconstructions achieve <10 per cent accuracy in the areas where these constraints are available but provide poorer results when departing from these regions. Weak-lensing only reconstructions give <10 per cent accuracy outside the strong-lensing regime, but cannot resolve the inner core structure of the lens. Once both regimes are combined, accurate reconstructions can be achieved over the full field of view. The reconstruction of a simulated lens, using constraints that mimics real observations, yields accurate results in terms of surface-mass density, Navarro-Frenk-White profile (NFW) parameters, Einstein radius and magnification map recovery, encouraging the application of this method to real data.

Point source reconstruction principle of linear inverse problems

International Nuclear Information System (INIS)

Terazono, Yasushi; Matani, Ayumu; Fujimaki, Norio; Murata, Tsutomu

2010-01-01

Exact point source reconstruction for underdetermined linear inverse problems with a block-wise structure was studied. In a block-wise problem, elements of a source vector are partitioned into blocks. Accordingly, a leadfield matrix, which represents the forward observation process, is also partitioned into blocks. A point source is a source having only one nonzero block. An example of such a problem is current distribution estimation in electroencephalography and magnetoencephalography, where a source vector represents a vector field and a point source represents a single current dipole. In this study, the block-wise norm, a block-wise extension of the l p -norm, was defined as the family of cost functions of the inverse method. The main result is that a set of three conditions was found to be necessary and sufficient for block-wise norm minimization to ensure exact point source reconstruction for any leadfield matrix that admit such reconstruction. The block-wise norm that satisfies the conditions is the sum of the cost of all the observations of source blocks, or in other words, the block-wisely extended leadfield-weighted l 1 -norm. Additional results are that minimization of such a norm always provides block-wisely sparse solutions and that its solutions form cones in source space

Nineteenth Century Long-Term Instrumental Records, Examples From the Southeastern United States

Science.gov (United States)

Mock, C. J.

2001-12-01

Early instrumental records in the United States, defined as those operating before 1892 which is regarded the period prior to the modern climate record, provide a longer perspective of climatic variability at decadal and interannual timescales. Such reconstructions also provide a means of verification for other proxy data. This paper provides a American perspective of historical climatic research, emphasizing the urgent need to properly evaluate data quality and provide necessary corrections to make them compatible with the modern record. Different fixed observation times, different practices of weather instrument exposures, and statistical methods for calibration are the main issues in applying corrections and conducting proper climatic interpretations. I illustrate several examples on methodologies of this historical climatic research, focusing on the following in the Southeastern United States: daily reconstructed temperature time-series centered on Charleston SC and Natchez MS back to the late eighteenth century, and precipitation frequency reconstructions during the antebellum period for the Gulf Coast and coastal Southeast Atlantic states. Results indicate several prominent extremes unprecedented as compared to the modern record, such as the widespread warm winter of 1827-28, and the severe cold winters of 1856 and 1857. The reconstructions also yield important information concerning responses to past ENSO events, the PNA, NAO, and the PDO, particularly when compared with instrumental data from other regions. A high potential also exists for applying the climate reconstructions to assess historical climatic impacts on society in the Southeast, such as to understand climatic linkages to famous case studies of Yellow Fever epidemics and severe drought.

Noniterative MAP reconstruction using sparse matrix representations.

Science.gov (United States)

Cao, Guangzhi; Bouman, Charles A; Webb, Kevin J

2009-09-01

We present a method for noniterative maximum a posteriori (MAP) tomographic reconstruction which is based on the use of sparse matrix representations. Our approach is to precompute and store the inverse matrix required for MAP reconstruction. This approach has generally not been used in the past because the inverse matrix is typically large and fully populated (i.e., not sparse). In order to overcome this problem, we introduce two new ideas. The first idea is a novel theory for the lossy source coding of matrix transformations which we refer to as matrix source coding. This theory is based on a distortion metric that reflects the distortions produced in the final matrix-vector product, rather than the distortions in the coded matrix itself. The resulting algorithms are shown to require orthonormal transformations of both the measurement data and the matrix rows and columns before quantization and coding. The second idea is a method for efficiently storing and computing the required orthonormal transformations, which we call a sparse-matrix transform (SMT). The SMT is a generalization of the classical FFT in that it uses butterflies to compute an orthonormal transform; but unlike an FFT, the SMT uses the butterflies in an irregular pattern, and is numerically designed to best approximate the desired transforms. We demonstrate the potential of the noniterative MAP reconstruction with examples from optical tomography. The method requires offline computation to encode the inverse transform. However, once these offline computations are completed, the noniterative MAP algorithm is shown to reduce both storage and computation by well over two orders of magnitude, as compared to a linear iterative reconstruction methods.

Simultaneous multi-component seismic denoising and reconstruction via K-SVD

Science.gov (United States)

Hou, Sian; Zhang, Feng; Li, Xiangyang; Zhao, Qiang; Dai, Hengchang

2018-06-01

Data denoising and reconstruction play an increasingly significant role in seismic prospecting for their value in enhancing effective signals, dealing with surface obstacles and reducing acquisition costs. In this paper, we propose a novel method to denoise and reconstruct multicomponent seismic data simultaneously. This method lies within the framework of machine learning and the key points are defining a suitable weight function and a modified inner product operator. The purpose of these two processes are to perform missing data machine learning when the random noise deviation is unknown, and building a mathematical relationship for each component to incorporate all the information of multi-component data. Two examples, using synthetic and real multicomponent data, demonstrate that the new method is a feasible alternative for multi-component seismic data processing.

Upgrade to iterative image reconstruction (IR) in abdominal MDCT imaging. A clinical study for detailed parameter optimization beyond vendor recommendations using the adaptive statistical iterative reconstruction environment (ASIR)

International Nuclear Information System (INIS)

Mueck, F.G.; Koerner, M.; Scherr, M.K.; Geyer, L.L.; Deak, Z.; Linsenmaier, U.; Reiser, M.; Wirth, S.

2012-01-01

To compare the image quality of dose-reduced 64-row abdominal CT reconstructed at different levels of adaptive statistical iterative reconstruction (ASIR) to full-dose baseline examinations reconstructed with filtered back-projection (FBP) in a clinical setting and upgrade situation. Abdominal baseline examinations (noise index NI = 29; LightSpeed VCT XT, GE) were intra-individually compared to follow-up studies on a CT with an ASIR option (NI = 43; Discovery HD750, GE), n = 42. Standard-kernel images were calculated with ASIR blendings of 0 - 100 % in slice and volume mode, respectively. Three experienced radiologists compared the image quality of these 567 sets to their corresponding full-dose baseline examination (-2: diagnostically inferior, -1: inferior, 0: equal, +1: superior, +2: diagnostically superior). Furthermore, a phantom was scanned. Statistical analysis used the Wilcoxon - the Mann-Whitney U-test and the intra-class correlation (ICC). The mean CTDIvol decreased from 19.7 ± 5.5 to 12.2 ± 4.7 mGy (p 0.10). Volume mode performed 73 % slower than slice mode (p < 0.01). After the system upgrade, the vendor recommendation of ASIR 50 % in slice mode allowed for a dose reduction of 38 % in abdominal CT with comparable image quality and time expenditure. However, there is still further dose reduction potential for more complex reconstruction settings. (orig.)

Convex optimization problem prototyping for image reconstruction in computed tomography with the Chambolle–Pock algorithm

DEFF Research Database (Denmark)

Sidky, Emil Y.; Jørgensen, Jakob Heide; Pan, Xiaochuan

2012-01-01

The primal–dual optimization algorithm developed in Chambolle and Pock (CP) (2011 J. Math. Imag. Vis. 40 1–26) is applied to various convex optimization problems of interest in computed tomography (CT) image reconstruction. This algorithm allows for rapid prototyping of optimization problems...... for the purpose of designing iterative image reconstruction algorithms for CT. The primal–dual algorithm is briefly summarized in this paper, and its potential for prototyping is demonstrated by explicitly deriving CP algorithm instances for many optimization problems relevant to CT. An example application...

Rehabilitation and reconstruction of Islamic Architectural Heritage in China: the example of the Ningxia Hui Autonomous Region

OpenAIRE

Huang Lijun; François N. Dubé

2015-01-01

The Ningxia Hui Autonomous Region, located in Northwestern China, has the highest concentration of Hui Muslims in China: around 34% of the local population is Hui Muslim. Following the anti-religious campaigns of the communist regime and the wide destruction of the Cultural Revolution, Hui Muslims began gradually to reclaim their Muslim heritage in the late 70's. A major aspect of the rediscovery of their Islamic heritage was the Rehabilitation and reconstruction of Islamic Architectural buil...

Sea level reconstructions from altimetry and tide gauges using independent component analysis

Science.gov (United States)

Brunnabend, Sandra-Esther; Kusche, Jürgen; Forootan, Ehsan

2017-04-01

Many reconstructions of global and regional sea level rise derived from tide gauges and satellite altimetry used the method of empirical orthogonal functions (EOF) to reduce noise, improving the spatial resolution of the reconstructed outputs and investigate the different signals in climate time series. However, the second order EOF method has some limitations, e.g. in the separation of individual physical signals into different modes of sea level variations and in the capability to physically interpret the different modes as they are assumed to be orthogonal. Therefore, we investigate the use of the more advanced statistical signal decomposition technique called independent component analysis (ICA) to reconstruct global and regional sea level change from satellite altimetry and tide gauge records. Our results indicate that the used method has almost no influence on the reconstruction of global mean sea level change (1.6 mm/yr from 1960-2010 and 2.9 mm/yr from 1993-2013). Only different numbers of modes are needed for the reconstruction. Using the ICA method is advantageous for separating independent climate variability signals from regional sea level variations as the mixing problem of the EOF method is strongly reduced. As an example, the modes most dominated by the El Niño-Southern Oscillation (ENSO) signal are compared. Regional sea level changes near Tianjin, China, Los Angeles, USA, and Majuro, Marshall Islands are reconstructed and the contributions from ENSO are identified.

How to apply SHA 2011 at a subnational level in China's practical situation: take children health expenditure as an example.

Science.gov (United States)

Li, Mingyang; Zheng, Ang; Duan, Wenjuan; Mu, Xin; Liu, Chunli; Yang, Yang; Wang, Xin

2018-06-01

System of Health Accounts 2011 (SHA 2011) is a new health care accounts system, revised from SHA 1.0 by the Organisation for Economic Co-operation and Development (OECD), the World Health Organization (WHO) and Eurostat. It keeps the former tri-axial relationship and develops three analytical interfaces, in order to fix the existing shortcomings and make it more convenient for analysis and comparison across countries. SHA 2011 was introduced in China in 2014, and little about its application in China has been reported. This study takes children as an example to study how to apply SHA 2011 at the subnational level in the practical situation of China's health system. Multistage random sampling method was applied and 3 532 517 samples from 252 institutions were included in the study. Official yearbooks and account reports helped the estimation of provincial data. The formula to calculate Current Health Expenditure (CHE) was introduced step-by-step. STATA 10.0 was used for statistics. Under the frame of SHA 2011, the CHE for children in Liaoning was calculated as US$ 0.74 billion in 2014; 98.56% of the expenditure was spent in hospital and the allocation to primary health care institutions was insufficient. Infection, maternal and prenatal diseases cost the most in terms of Global Burden of Disease (GBD), and respiratory system diseases took the leading place in terms of International Classification of Disease Tenth Revision (ICD-10). In addition, medical income contributed most to the health financing. The method to apply SHA 2011 at the subnational level is feasible in China. It makes health accounts more adaptable to rapidly developing health systems and makes the financing data more readily available for analytical use. SHA 2011 is a better health expenditure accounts system to reveal the actual burden on residents and deserves further promotion in China as well as around the world.

A pseudoproxy assessment of data assimilation for reconstructing the atmosphere-ocean dynamics of hydroclimate extremes

Science.gov (United States)

Steiger, Nathan J.; Smerdon, Jason E.

2017-10-01

Because of the relatively brief observational record, the climate dynamics that drive multiyear to centennial hydroclimate variability are not adequately characterized and understood. Paleoclimate reconstructions based on data assimilation (DA) optimally fuse paleoclimate proxies with the dynamical constraints of climate models, thus providing a coherent dynamical picture of the past. DA is therefore an important new tool for elucidating the mechanisms of hydroclimate variability over the last several millennia. But DA has so far remained untested for global hydroclimate reconstructions. Here we explore whether or not DA can be used to skillfully reconstruct global hydroclimate variability along with the driving climate dynamics. Through a set of idealized pseudoproxy experiments, we find that an established DA reconstruction approach can in principle be used to reconstruct hydroclimate at both annual and seasonal timescales. We find that the skill of such reconstructions is generally highest near the proxy sites. This set of reconstruction experiments is specifically designed to estimate a realistic upper bound for the skill of this DA approach. Importantly, this experimental framework allows us to see where and for what variables the reconstruction approach may never achieve high skill. In particular for tree rings, we find that hydroclimate reconstructions depend critically on moisture-sensitive trees, while temperature reconstructions depend critically on temperature-sensitive trees. Real-world DA-based reconstructions will therefore likely require a spatial mixture of temperature- and moisture-sensitive trees to reconstruct both temperature and hydroclimate variables. Additionally, we illustrate how DA can be used to elucidate the dynamical mechanisms of drought with two examples: tropical drivers of multiyear droughts in the North American Southwest and in equatorial East Africa. This work thus provides a foundation for future DA-based hydroclimate

Enhanced reconstruction of weighted networks from strengths and degrees

International Nuclear Information System (INIS)

Mastrandrea, Rossana; Fagiolo, Giorgio; Squartini, Tiziano; Garlaschelli, Diego

2014-01-01

Network topology plays a key role in many phenomena, from the spreading of diseases to that of financial crises. Whenever the whole structure of a network is unknown, one must resort to reconstruction methods that identify the least biased ensemble of networks consistent with the partial information available. A challenging case, frequently encountered due to privacy issues in the analysis of interbank flows and Big Data, is when there is only local (node-specific) aggregate information available. For binary networks, the relevant ensemble is one where the degree (number of links) of each node is constrained to its observed value. However, for weighted networks the problem is much more complicated. While the naïve approach prescribes to constrain the strengths (total link weights) of all nodes, recent counter-intuitive results suggest that in weighted networks the degrees are often more informative than the strengths. This implies that the reconstruction of weighted networks would be significantly enhanced by the specification of both strengths and degrees, a computationally hard and bias-prone procedure. Here we solve this problem by introducing an analytical and unbiased maximum-entropy method that works in the shortest possible time and does not require the explicit generation of reconstructed samples. We consider several real-world examples and show that, while the strengths alone give poor results, the additional knowledge of the degrees yields accurately reconstructed networks. Information-theoretic criteria rigorously confirm that the degree sequence, as soon as it is non-trivial, is irreducible to the strength sequence. Our results have strong implications for the analysis of motifs and communities and whenever the reconstructed ensemble is required as a null model to detect higher-order patterns

LONG-TERM CULTURAL IMPACTS OF DISASTER DECISION-MAKING: The Case of Post Earthquake Reconstruction in Marathwada, India

Directory of Open Access Journals (Sweden)

Rohit Jigyasu

2013-11-01

Full Text Available Emergency situations are special since they present decision makers with a context that is characterized by extraordinary constraints on resources, need for urgency of actions and a critical psychosocial state that is markedly different than the normal situation. However, actions taken under these extraordinary situations can have a profound bearing on the longterm recovery of the community and its heritage. This paper considers the critical aspects of decision-making in emergency situations that need to be considered for sustainable longterm recovery of cultural heritage. It is difficult however to judge these essential considerations beforehand without evaluating the impacts of these decisions in hindsight. These considerations will be illustrated through case study of post-earthquake reconstruction in Marathwada in India by assessing the long-term impact of rehabilitation policies formulated in the immediate aftermath of the earthquake. Patterns of adaptation and change in these areas demonstrate how small decisions taken during emergency can have wider socio-economic and physical implications. These cases will also show the importance of understanding the local context, especially with respect to local vulnerabilities as well as capacities, skills and resources while making decisions. These would also emphasize the necessity and ways of engaging various stakeholders, especially the local community, not as passive recipients but as important actors in the decision-making process. These considerations are significant for conservation professionals making decisions during emergencies, especially with regards to immediate protection, repairs and long-term recovery of cultural heritage, while we largely remain at the periphery of the reconstruction process.

A genetic approach to shape reconstruction in limited data tomography

International Nuclear Information System (INIS)

Turcanu, C.; Craciunescu, T.

2001-01-01

The paper proposes a new method for shape reconstruction in computerized tomography. Unlike nuclear medicine applications, in physical science problems we are often confronted with limited data sets: constraints in the number of projections or limited view angles . The problem of image reconstruction from projection may be considered as a problem of finding an image (solution) having projections that match the experimental ones. In our approach, we choose a statistical correlation coefficient to evaluate the fitness of any potential solution. The optimization process is carried out by a genetic algorithm. The algorithm has some features common to all genetic algorithms but also some problem-oriented characteristics. One of them is that a chromosome, representing a potential solution, is not linear but coded as a matrix of pixels corresponding to a two-dimensional image. This kind of internal representation reflects the genuine manifestation and slight differences between two points situated in the original problem space give rise to similar differences once they become coded. Another particular feature is a newly built crossover operator: the grid-based crossover, suitable for high dimension two-dimensional chromosomes. Except for the population size and the dimension of the cutting grid for the grid-based crossover, all the other parameters of the algorithm are independent of the geometry of the tomographic reconstruction. The performances of the method are evaluated on a phantom typical for an application with limited data sets: the determination of the neutron energy spectra with time resolution in case of short-pulsed neutron emission. A genetic reconstruction is presented. The qualitative judgement and also the quantitative one, based on some figures of merit, point out that the proposed method ensures an improved reconstruction of shapes, sizes and resolution in the image, even in the presence of noise. (authors)

Landscape design strategies for post-disaster reconstructions based on traditional ethical wisdom

Science.gov (United States)

Yi, Shouli; Hu, Di; Gao, Suping; Lei, Ting; Chen, Qibin

2018-03-01

In the face of the black swan events which frequently happened globally, I take the earthquake of Ya'an, happened at 4.20 in Sichuan, as an example of my subject. The results indicate that the social responsibility of landscape architects is a post-disaster reconstruction of a material and spiritual homeland for victims and mental care for individuals, which specifically reflected in the process of rebuilding victims' sense of security. The reconstruction of a sense of security must follow certain ethics and moralities which embody the ecological wisdom. We take a typical case of Ya'an Lushan Snow Mountain Village-the earthquake distress area, we found the incidence of disease was up to 68.6% through the PTSD analysis, indicating the overall absence of a sense of security. To solve the problem and reconstruct people's mental and material homeland, the article discussed the strategies and solutions to post-disaster landscape design based on traditional ethical wisdom.

Investigations On Water Circulation in Animal Sea-Water Basins – On the Example of Seals′ Breeding Pools

Directory of Open Access Journals (Sweden)

Zima Piotr

2017-04-01

Full Text Available This paper presents general comments concerning investigations on water circulation in animal breeding pools containing sea water. As an example are given results of computer simulation of water circulation in seals′ breeding pools situated in Marine Station at Hel, belonging to Oceanographic Institute , Gdansk University. A mathematical model of three main pools was prepared with taking into account their inflow and outflow water supply points. Next, the object indication ( tracer tests were done with the use of mathematical modelling as well as in-situ measurements. For description of flow field in steady conditions a simplified model of 2D flow in the form of Helmholtz biharmonic equation of stream function , recalculated then into velocity vector components, was used. The equation , supplemented with appropriate boundary conditions , was solved numerically by using the finite differences method. The spreading of a substance dissolved in water (tracer was analyzed by solving 2D equation of transient advecting - dispersing transport. To solve it the finite volumes method was applied. The applied model was verified by conducting the indication tests with the use of the rhodamine WT as a tracer. The obtained results made it possible to reconstruct water circulation within the seals′ pools and identify stagnation zones in which water circulation may be made difficult.

RECONSTRUCTION OF PRECIPITATION SERIES AND ANALYSIS OF CLIMATE CHANGE OVER PAST 500 YEARS IN NORTHERN CHINA

Institute of Scientific and Technical Information of China (English)

RONG Yan-shu; TU Qi-pu

2005-01-01

It is important and necessary to get a much longer precipitation series in order to research features of drought/flood and climate change.Based on dryness and wetness grades series of 18 stations in Northern China of 533 years from 1470 to 2002, the Moving Cumulative Frequency Method (MCFM) was developed, moving average precipitation series from 1499 to 2002 were reconstructed by testing three kinds of average precipitation, and the features of climate change and dry and wet periods were researched by using reconstructed precipitation series in the present paper.The results showed that there were good relationship between the reconstructed precipitation series and the observation precipitation series since 1954 and their relative root-mean-square error were below 1.89%, that the relation between reconstructed series and the dryness and wetness grades series were nonlinear and this nonlinear relation implied that reconstructed series were reliable and could became foundation data for researching evolution of the drought and flood.Analysis of climate change upon reconstructed precipitation series revealed that although drought intensity of recent dry period from middle 1970s of 20th century until early 21st century was not the strongest in historical climate of Northern China, intensity and duration of wet period was a great deal decreasing and shortening respectively, climate evolve to aridification situation in Northern China.

Breast reconstruction after mastectomy

Directory of Open Access Journals (Sweden)

Daniel eSchmauss

2016-01-01

Full Text Available Breast cancer is the leading cause of cancer death in women worldwide. Its surgical approach has become less and less mutilating in the last decades. However, the overall number of breast reconstructions has significantly increased lately. Nowadays breast reconstruction should be individualized at its best, first of all taking into consideration oncological aspects of the tumor, neo-/adjuvant treatment and genetic predisposition, but also its timing (immediate versus delayed breast reconstruction, as well as the patient’s condition and wish. This article gives an overview over the various possibilities of breast reconstruction, including implant- and expander-based reconstruction, flap-based reconstruction (vascularized autologous tissue, the combination of implant and flap, reconstruction using non-vascularized autologous fat, as well as refinement surgery after breast reconstruction.

Breast reconstruction - implants

Science.gov (United States)

Breast implants surgery; Mastectomy - breast reconstruction with implants; Breast cancer - breast reconstruction with implants ... harder to find a tumor if your breast cancer comes back. Getting breast implants does not take as long as breast reconstruction ...

Verifying three-dimensional skull model reconstruction using cranial index of symmetry.

Directory of Open Access Journals (Sweden)

Woon-Man Kung

Full Text Available BACKGROUND: Difficulty exists in scalp adaptation for cranioplasty with customized computer-assisted design/manufacturing (CAD/CAM implant in situations of excessive wound tension and sub-cranioplasty dead space. To solve this clinical problem, the CAD/CAM technique should include algorithms to reconstruct a depressed contour to cover the skull defect. Satisfactory CAM-derived alloplastic implants are based on highly accurate three-dimensional (3-D CAD modeling. Thus, it is quite important to establish a symmetrically regular CAD/CAM reconstruction prior to depressing the contour. The purpose of this study is to verify the aesthetic outcomes of CAD models with regular contours using cranial index of symmetry (CIS. MATERIALS AND METHODS: From January 2011 to June 2012, decompressive craniectomy (DC was performed for 15 consecutive patients in our institute. 3-D CAD models of skull defects were reconstructed using commercial software. These models were checked in terms of symmetry by CIS scores. RESULTS: CIS scores of CAD reconstructions were 99.24±0.004% (range 98.47-99.84. CIS scores of these CAD models were statistically significantly greater than 95%, identical to 99.5%, but lower than 99.6% (p<0.001, p = 0.064, p = 0.021 respectively, Wilcoxon matched pairs signed rank test. These data evidenced the highly accurate symmetry of these CAD models with regular contours. CONCLUSIONS: CIS calculation is beneficial to assess aesthetic outcomes of CAD-reconstructed skulls in terms of cranial symmetry. This enables further accurate CAD models and CAM cranial implants with depressed contours, which are essential in patients with difficult scalp adaptation.

Outcomes and complications following graft reconstruction for anterior sternoclavicular joint instability.

Science.gov (United States)

Willinger, Lukas; Schanda, Jakob; Herbst, Elmar; Imhoff, Andreas B; Martetschläger, Frank

2016-12-01

Publications describing tendon graft reconstruction for anterior sternoclavicular joint (SCJ) instability are rare and usually refer to small patient numbers. The aim of this study was to systematically review the literature regarding outcomes and complications following tendon graft reconstruction techniques for anterior SCJ instability. An online database was systematically searched to identify studies on graft reconstruction for anterior SCJ instability. Reported outcome scores were graded as excellent, good, fair and poor to summarize the study results. All reported complications were recorded. Five articles with a total of 80 patients met the inclusion criteria. Reported outcomes were excellent in 10 %, good in 89 % and fair in 1 %. Recurrent instability was found in 10 % of the patients, and 5 % underwent revision surgery due to persistent impairment of shoulder function related to SCJ instability or osteoarthritis. Surgical stabilization techniques for the SCJ using autologous tendon grafts have shown to be safe and reliable and make better patients' pain situation and shoulder function. However, a certain amount of impairment might persist, which needs to be discussed with patients. Severe complications were rare and revision rates were as low as 5 %. Therefore, graft reconstruction techniques should be considered for patients with chronic anterior SCJ instability after a course of failed conservative treatment. This study is valuable for clinicians in daily clinical practice when dealing with this difficult-to-treat pathology and can help surgeons to better predict the clinical outcomes and complications following SCJ graft reconstruction. It should, however, not lead to underestimation of the potential risks of the procedure. Systematic review, Level IV.

Digital artery perforator (DAP) flaps: modifications for fingertip and finger stump reconstruction.

Science.gov (United States)

Mitsunaga, Narushima; Mihara, Makoto; Koshima, Isao; Gonda, Koichi; Takuya, Iida; Kato, Harunosuke; Araki, Jun; Yamamoto, Yushuke; Yuhei, Otaki; Todokoro, Takeshi; Ishikawa, Shoichi; Eri, Uehara; Mundinger, Gerhard S

2010-08-01

Various fingertip reconstructions have been reported for situations where microsurgical finger replantation is impossible. One method is the digital artery perforator (DAP) flap. Herein we report 13 DAP flaps for fingertip and finger stump reconstruction following traumatic finger amputations, highlighting modifications to the originally described DAP flap. From October 1998 to December 2007, a total of 13 fingers (11 patients) underwent fingertip and finger stump reconstruction with modified DAP flaps following traumatic finger amputations. We performed six adipocutaneous flaps, three adipose-only flaps, two supercharged flaps and two extended flaps. Flap size ranged from 1.44 to 8 cm(2) (average 3.25 cm(2)). All flaps survived completely with the exception of partial skin necrosis in two cases. One of these cases required debridement and skin grafting. Our initial three cases used donor-site skin grafting. The donor site was closed primarily in the 10 subsequent cases. No patients showed postoperative hypersensitivity of repaired fingertips. Semmes-Weinstein (SW) test result for flaps including a digital nerve branch did not differ from those without (average 4.07 vs. 3.92). Modified DAP flaps allow for preservation of digital length, volume and finger function. They can be raised as adiposal-only flaps or extended flaps and supercharged through perforator-to-perforator anastomoses. The donor defect on the lateral pulp can be closed primarily or by skin grafting. For traumatic fingertip and finger stump reconstructions, DAP flaps deliver consistent aesthetic and functional results. Copyright 2009 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Assessing Operational Situations

DEFF Research Database (Denmark)

Zhang, Xinxin

In spite of the high level of automation commonly applied to today’s engineering system, humans’ skill and knowledge still plays a central role in the systems’ daily operation, critical decision making, and accident management. The complexity of the engineered system poses great challenge for human...... operators to perceive and understand the operational situation. The research domain of situation awareness approaches the operational challenges from the human cognition perspective while the presented thesis aims at supporting situation assessment from the system perspective. The thesis has reviewed...... different perspectives on situation awareness in the human factor studies and uses the knowledge reflectively for system representation and analysis. The human cognitive activities during complex plant operation and how they perceive a situation and what kind of knowledge has to be established in the human...

A two-way regularization method for MEG source reconstruction

KAUST Repository

Tian, Tian Siva; Huang, Jianhua Z.; Shen, Haipeng; Li, Zhimin

2012-01-01

The MEG inverse problem refers to the reconstruction of the neural activity of the brain from magnetoencephalography (MEG) measurements. We propose a two-way regularization (TWR) method to solve the MEG inverse problem under the assumptions that only a small number of locations in space are responsible for the measured signals (focality), and each source time course is smooth in time (smoothness). The focality and smoothness of the reconstructed signals are ensured respectively by imposing a sparsity-inducing penalty and a roughness penalty in the data fitting criterion. A two-stage algorithm is developed for fast computation, where a raw estimate of the source time course is obtained in the first stage and then refined in the second stage by the two-way regularization. The proposed method is shown to be effective on both synthetic and real-world examples. © Institute of Mathematical Statistics, 2012.

A two-way regularization method for MEG source reconstruction

KAUST Repository

Tian, Tian Siva

2012-09-01

The MEG inverse problem refers to the reconstruction of the neural activity of the brain from magnetoencephalography (MEG) measurements. We propose a two-way regularization (TWR) method to solve the MEG inverse problem under the assumptions that only a small number of locations in space are responsible for the measured signals (focality), and each source time course is smooth in time (smoothness). The focality and smoothness of the reconstructed signals are ensured respectively by imposing a sparsity-inducing penalty and a roughness penalty in the data fitting criterion. A two-stage algorithm is developed for fast computation, where a raw estimate of the source time course is obtained in the first stage and then refined in the second stage by the two-way regularization. The proposed method is shown to be effective on both synthetic and real-world examples. © Institute of Mathematical Statistics, 2012.

Emergency situations

International Nuclear Information System (INIS)

2007-01-01

The nuclear activities are exercised so as to prevent the accidents. They are subjected to a rule whom application is controlled by the Asn. The risk of grave accident is so limited to a very low level of probability. He cannot be however completely pushed aside. The expression ' radiological emergency situation ' indicates a situation which ensues from an incident or of an accident risking to lead to an emission of radioactive materials or a level of radioactivity susceptible to strike a blow at the public health. The term ' nuclear crisis ' is used for the events which can lead to a radiological emergency situation on a nuclear basic installation or during a transport of radioactive materials. The preparation and the management of emergency situations, that they are of natural, accidental or terrorist origin, became a major concern of our society. We propose you of to know more about it in this file. (N.C.)

A Markov game theoretic data fusion approach for cyber situational awareness

Science.gov (United States)

Shen, Dan; Chen, Genshe; Cruz, Jose B., Jr.; Haynes, Leonard; Kruger, Martin; Blasch, Erik

2007-04-01

This paper proposes an innovative data-fusion/ data-mining game theoretic situation awareness and impact assessment approach for cyber network defense. Alerts generated by Intrusion Detection Sensors (IDSs) or Intrusion Prevention Sensors (IPSs) are fed into the data refinement (Level 0) and object assessment (L1) data fusion components. High-level situation/threat assessment (L2/L3) data fusion based on Markov game model and Hierarchical Entity Aggregation (HEA) are proposed to refine the primitive prediction generated by adaptive feature/pattern recognition and capture new unknown features. A Markov (Stochastic) game method is used to estimate the belief of each possible cyber attack pattern. Game theory captures the nature of cyber conflicts: determination of the attacking-force strategies is tightly coupled to determination of the defense-force strategies and vice versa. Also, Markov game theory deals with uncertainty and incompleteness of available information. A software tool is developed to demonstrate the performance of the high level information fusion for cyber network defense situation and a simulation example shows the enhanced understating of cyber-network defense.

Spectral CT metal artifact reduction with an optimization-based reconstruction algorithm

Science.gov (United States)

Gilat Schmidt, Taly; Barber, Rina F.; Sidky, Emil Y.

2017-03-01

Metal objects cause artifacts in computed tomography (CT) images. This work investigated the feasibility of a spectral CT method to reduce metal artifacts. Spectral CT acquisition combined with optimization-based reconstruction is proposed to reduce artifacts by modeling the physical effects that cause metal artifacts and by providing the flexibility to selectively remove corrupted spectral measurements in the spectral-sinogram space. The proposed Constrained `One-Step' Spectral CT Image Reconstruction (cOSSCIR) algorithm directly estimates the basis material maps while enforcing convex constraints. The incorporation of constraints on the reconstructed basis material maps is expected to mitigate undersampling effects that occur when corrupted data is excluded from reconstruction. The feasibility of the cOSSCIR algorithm to reduce metal artifacts was investigated through simulations of a pelvis phantom. The cOSSCIR algorithm was investigated with and without the use of a third basis material representing metal. The effects of excluding data corrupted by metal were also investigated. The results demonstrated that the proposed cOSSCIR algorithm reduced metal artifacts and improved CT number accuracy. For example, CT number error in a bright shading artifact region was reduced from 403 HU in the reference filtered backprojection reconstruction to 33 HU using the proposed algorithm in simulation. In the dark shading regions, the error was reduced from 1141 HU to 25 HU. Of the investigated approaches, decomposing the data into three basis material maps and excluding the corrupted data demonstrated the greatest reduction in metal artifacts.

Fast image reconstruction for Compton camera using stochastic origin ensemble approach.

Science.gov (United States)

Andreyev, Andriy; Sitek, Arkadiusz; Celler, Anna

2011-01-01

Compton camera has been proposed as a potential imaging tool in astronomy, industry, homeland security, and medical diagnostics. Due to the inherent geometrical complexity of Compton camera data, image reconstruction of distributed sources can be ineffective and/or time-consuming when using standard techniques such as filtered backprojection or maximum likelihood-expectation maximization (ML-EM). In this article, the authors demonstrate a fast reconstruction of Compton camera data using a novel stochastic origin ensembles (SOE) approach based on Markov chains. During image reconstruction, the origins of the measured events are randomly assigned to locations on conical surfaces, which are the Compton camera analogs of lines-of-responses in PET. Therefore, the image is defined as an ensemble of origin locations of all possible event origins. During the course of reconstruction, the origins of events are stochastically moved and the acceptance of the new event origin is determined by the predefined acceptance probability, which is proportional to the change in event density. For example, if the event density at the new location is higher than in the previous location, the new position is always accepted. After several iterations, the reconstructed distribution of origins converges to a quasistationary state which can be voxelized and displayed. Comparison with the list-mode ML-EM reveals that the postfiltered SOE algorithm has similar performance in terms of image quality while clearly outperforming ML-EM in relation to reconstruction time. In this study, the authors have implemented and tested a new image reconstruction algorithm for the Compton camera based on the stochastic origin ensembles with Markov chains. The algorithm uses list-mode data, is parallelizable, and can be used for any Compton camera geometry. SOE algorithm clearly outperforms list-mode ML-EM for simple Compton camera geometry in terms of reconstruction time. The difference in computational time

Adaptive algebraic reconstruction technique

International Nuclear Information System (INIS)

Lu Wenkai; Yin Fangfang

2004-01-01

Algebraic reconstruction techniques (ART) are iterative procedures for reconstructing objects from their projections. It is proven that ART can be computationally efficient by carefully arranging the order in which the collected data are accessed during the reconstruction procedure and adaptively adjusting the relaxation parameters. In this paper, an adaptive algebraic reconstruction technique (AART), which adopts the same projection access scheme in multilevel scheme algebraic reconstruction technique (MLS-ART), is proposed. By introducing adaptive adjustment of the relaxation parameters during the reconstruction procedure, one-iteration AART can produce reconstructions with better quality, in comparison with one-iteration MLS-ART. Furthermore, AART outperforms MLS-ART with improved computational efficiency

BigSUR: large-scale structured urban reconstruction

KAUST Repository

Kelly, Tom

2017-11-22

The creation of high-quality semantically parsed 3D models for dense metropolitan areas is a fundamental urban modeling problem. Although recent advances in acquisition techniques and processing algorithms have resulted in large-scale imagery or 3D polygonal reconstructions, such data-sources are typically noisy, and incomplete, with no semantic structure. In this paper, we present an automatic data fusion technique that produces high-quality structured models of city blocks. From coarse polygonal meshes, street-level imagery, and GIS footprints, we formulate a binary integer program that globally balances sources of error to produce semantically parsed mass models with associated facade elements. We demonstrate our system on four city regions of varying complexity; our examples typically contain densely built urban blocks spanning hundreds of buildings. In our largest example, we produce a structured model of 37 city blocks spanning a total of 1,011 buildings at a scale and quality previously impossible to achieve automatically.

BigSUR: large-scale structured urban reconstruction

KAUST Repository

Kelly, Tom; Femiani, John; Wonka, Peter; Mitra, Niloy J.

2017-01-01

The creation of high-quality semantically parsed 3D models for dense metropolitan areas is a fundamental urban modeling problem. Although recent advances in acquisition techniques and processing algorithms have resulted in large-scale imagery or 3D polygonal reconstructions, such data-sources are typically noisy, and incomplete, with no semantic structure. In this paper, we present an automatic data fusion technique that produces high-quality structured models of city blocks. From coarse polygonal meshes, street-level imagery, and GIS footprints, we formulate a binary integer program that globally balances sources of error to produce semantically parsed mass models with associated facade elements. We demonstrate our system on four city regions of varying complexity; our examples typically contain densely built urban blocks spanning hundreds of buildings. In our largest example, we produce a structured model of 37 city blocks spanning a total of 1,011 buildings at a scale and quality previously impossible to achieve automatically.

Evaluation of the Effectiveness of Machine-based Situation Assessment - Preliminary Work

Science.gov (United States)

2008-08-01

consumers . 5. In nature, food webs can be described using networks. 6. An organisation is a network of people. 7. In the social domain there are...examine 6 DSTO-TN-0836 the linguistic affinity between concepts [16, 14, 17]. For example, if Concept A is drink and Concept B is beverage , they...of convergence behaviour they exhibit. A further extension to the methodology described above for comparing the situation assessment with the

Manual on sample-based data collection for fisheries assessment : Examples from Viet Nam

DEFF Research Database (Denmark)

Sparre, Per Johan

with through both detailed discussion and by using simple examples. These examples are mostly based on situations in tropical fisheries and, in particular, experience has been drawn from developing a data collection programme in Viet Nam. The main questions addressed in the manual are which fisheries data...... to collect, where and when to collect them. Only data collected from commercial marine capture fisheries are considered (data from freshwater fisheries, cultured fish and experimental fisheries are excluded). The methodologies used are mainly appropriate for a tropical developing country with many small...

FMEA and consideration of real work situations for safer design of production systems.

Science.gov (United States)

Lux, Aurélien; Mawo De Bikond, Johann; Etienne, Alain; Quillerou-Grivot, Edwige

2016-12-01

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.

MO-C-18A-01: Advances in Model-Based 3D Image Reconstruction

International Nuclear Information System (INIS)

Chen, G; Pan, X; Stayman, J; Samei, E

2014-01-01

Recent years have seen the emergence of CT image reconstruction techniques that exploit physical models of the imaging system, photon statistics, and even the patient to achieve improved 3D image quality and/or reduction of radiation dose. With numerous advantages in comparison to conventional 3D filtered backprojection, such techniques bring a variety of challenges as well, including: a demanding computational load associated with sophisticated forward models and iterative optimization methods; nonlinearity and nonstationarity in image quality characteristics; a complex dependency on multiple free parameters; and the need to understand how best to incorporate prior information (including patient-specific prior images) within the reconstruction process. The advantages, however, are even greater – for example: improved image quality; reduced dose; robustness to noise and artifacts; task-specific reconstruction protocols; suitability to novel CT imaging platforms and noncircular orbits; and incorporation of known characteristics of the imager and patient that are conventionally discarded. This symposium features experts in 3D image reconstruction, image quality assessment, and the translation of such methods to emerging clinical applications. Dr. Chen will address novel methods for the incorporation of prior information in 3D and 4D CT reconstruction techniques. Dr. Pan will show recent advances in optimization-based reconstruction that enable potential reduction of dose and sampling requirements. Dr. Stayman will describe a “task-based imaging” approach that leverages models of the imaging system and patient in combination with a specification of the imaging task to optimize both the acquisition and reconstruction process. Dr. Samei will describe the development of methods for image quality assessment in such nonlinear reconstruction techniques and the use of these methods to characterize and optimize image quality and dose in a spectrum of clinical

A new approach for quantitative evaluation of reconstruction algorithms in SPECT

International Nuclear Information System (INIS)

Raeisi, E.; Rajabi, H.; Aghamiri, S. M. R.

2006-01-01

In nuclear medicine, phantoms are mainly used to evaluate the overall performance of the imaging systems, and practically there is no phantom exclusively designed for the evaluation of the software performance. In this study the Hoffman brain phantom was used for quantitative evaluation of reconstruction techniques. The phantom is modified to acquire tomographic and planar image of the same structure. The planar image may be used as the reference image to evaluate the quality of reconstructed slices, using the companion software developed in MATLAB. Materials and Methods: The designed phantom was composed of 4 independent 2D slices that could have been placed juxtapose to the 3D phantom. Each slice was composed of objects of different size and shape (for example: circle, triangle, and rectangle). Each 2D slice was imaged at distances ranging from 0 to 15 cm from the collimator surface. The phantom in 3D configuration was imaged acquiring 128 views of 128*128 matrix size. Reconstruction was performed using different filtering condition and the reconstructed images were compared to the corresponding planar images. The modulation transfer function, scatter fraction and attenuation map were calculated for each reconstructed image. Results: Since all the parameters of the acquisition were identical for the 2D and the 3D imaging, it was assumed that the difference in the quality of the images has exclusively been due to the reconstruction condition. The planar images were assumed to be the most perfect images which could be obtained with the system. The comparison of the reconstructed slices with the corresponding planar images yielded the optimum reconstruction condition. The results clearly showed that Wiener filter yields superior quality image among the entire tested filters. The extent of the improvement has been quantified in terms of universal image quality index. Conclusion : The phantom and the accompanying software were evaluated and found to be quite useful in

The Reconstruction of the Historical Building of the Latin School in Malbork

Science.gov (United States)

Duda, Zenon; Kryzia, Katarzyna

2013-03-01

The paper summarizes the reconstruction of the historical building erected in the 14th century, during the times of the residence of Grand Master of the Teutonic Order Winrich von Kniprode, currently referred to as the Latin School. It characterizes the location of the Latin School in the urban conservation area of the town of Malbork. The building is situated in the stretch of the buttressed brick escarpment on the Nogat River in the line of the historic defensive walls of Malbork. The paper also outlines the history of this building, constructed and managed by the municipal authorities of Malbork, which for a long time was a seat of a Patronage of Saint George and the Merchant Guild, and next, from the 16th century until 1864, the building housed a school where basic Latin was taught. Next, the situation of this historical monument in the 20th century is discussed. In the next part of the paper, the geological conditions of the site where the building was erected are discussed. The conducted archeological and architectural exploratory research related to the historical building with a particular emphasis on historic preservation and restoration works focusing on the building and its surroundings is presented and analyzed. Currently carried out design, construction and adaptation works allowing new functions to be embedded into this building are also discussed. The paper shows the benefits due to the realization of the reconstruction program of the degraded building of the Latin school in the historic quarter of the town. These activities are aimed at the conversion of the currently derelict building by means of embedding new functions into it. There are being designed, among others, an interactive educational center modern library, astronomical observatory, craft museum and multifunctional hall, allowing proper conditions to be created for the development of educational, artistic and tourism related activities in the reconstructed building. The reconstruction of

European Forest Cover During the Past 12,000 Years: A Palynological Reconstruction Based on Modern Analogs and Remote Sensing.

Science.gov (United States)

Zanon, Marco; Davis, Basil A S; Marquer, Laurent; Brewer, Simon; Kaplan, Jed O

2018-01-01

Characterization of land cover change in the past is fundamental to understand the evolution and present state of the Earth system, the amount of carbon and nutrient stocks in terrestrial ecosystems, and the role played by land-atmosphere interactions in influencing climate. The estimation of land cover changes using palynology is a mature field, as thousands of sites in Europe have been investigated over the last century. Nonetheless, a quantitative land cover reconstruction at a continental scale has been largely missing. Here, we present a series of maps detailing the evolution of European forest cover during last 12,000 years. Our reconstructions are based on the Modern Analog Technique (MAT): a calibration dataset is built by coupling modern pollen samples with the corresponding satellite-based forest-cover data. Fossil reconstructions are then performed by assigning to every fossil sample the average forest cover of its closest modern analogs. The occurrence of fossil pollen assemblages with no counterparts in modern vegetation represents a known limit of analog-based methods. To lessen the influence of no-analog situations, pollen taxa were converted into plant functional types prior to running the MAT algorithm. We then interpolate site-specific reconstructions for each timeslice using a four-dimensional gridding procedure to create continuous gridded maps at a continental scale. The performance of the MAT is compared against methodologically independent forest-cover reconstructions produced using the REVEALS method. MAT and REVEALS estimates are most of the time in good agreement at a trend level, yet MAT regularly underestimates the occurrence of densely forested situations, requiring the application of a bias correction procedure. The calibrated MAT-based maps draw a coherent picture of the establishment of forests in Europe in the Early Holocene with the greatest forest-cover fractions reconstructed between ∼8,500 and 6,000 calibrated years BP. This

Simultaneous reconstruction of shape and generalized impedance functions in electrostatic imaging

International Nuclear Information System (INIS)

Cakoni, Fioralba; Hu, Yuqing; Kress, Rainer

2014-01-01

Determining the geometry and the physical nature of an inclusion within a conducting medium from voltage and current measurements on the accessible boundary of the medium can be modeled as an inverse boundary value problem for the Laplace equation subject to appropriate boundary conditions on the inclusion. We continue the investigations on the particular inverse problem with a generalized impedance condition started in Cakoni and Kress (2013 Inverse Problems 29 015005) by presenting an inverse algorithm for the simultaneous reconstruction of both the shape of the inclusion and the two impedance functions via a boundary integral equation approach. In addition to describing the reconstruction algorithm and illustrating its feasibility by numerical examples we also provide some extensions to the uniqueness results in Cakoni and Kress (2013 Inverse Problems 29 015005). (paper)

MO-FG-204-08: Optimization-Based Image Reconstruction From Unevenly Distributed Sparse Projection Views

International Nuclear Information System (INIS)

Xie, Huiqiao; Yang, Yi; Tang, Xiangyang; Niu, Tianye; Ren, Yi

2015-01-01

Purpose: Optimization-based reconstruction has been proposed and investigated for reconstructing CT images from sparse views, as such the radiation dose can be substantially reduced while maintaining acceptable image quality. The investigation has so far focused on reconstruction from evenly distributed sparse views. Recognizing the clinical situations wherein only unevenly sparse views are available, e.g., image guided radiation therapy, CT perfusion and multi-cycle cardiovascular imaging, we investigate the performance of optimization-based image reconstruction from unevenly sparse projection views in this work. Methods: The investigation is carried out using the FORBILD and an anthropomorphic head phantoms. In the study, 82 views, which are evenly sorted out from a full (360°) axial CT scan consisting of 984 views, form sub-scan I. Another 82 views are sorted out in a similar manner to form sub-scan II. As such, a CT scan with sparse (164) views at 1:6 ratio are formed. By shifting the two sub-scans relatively in view angulation, a CT scan with unevenly distributed sparse (164) views at 1:6 ratio are formed. An optimization-based method is implemented to reconstruct images from the unevenly distributed views. By taking the FBP reconstruction from the full scan (984 views) as the reference, the root mean square (RMS) between the reference and the optimization-based reconstruction is used to evaluate the performance quantitatively. Results: In visual inspection, the optimization-based method outperforms the FBP substantially in the reconstruction from unevenly distributed, which are quantitatively verified by the RMS gauged globally and in ROIs in both the FORBILD and anthropomorphic head phantoms. The RMS increases with increasing severity in the uneven angular distribution, especially in the case of anthropomorphic head phantom. Conclusion: The optimization-based image reconstruction can save radiation dose up to 12-fold while providing acceptable image quality

Natural releases from contaminated groundwater, Example Reference Biosphere 2B

Energy Technology Data Exchange (ETDEWEB)

Simon, I. [CIEMAT/PIRA, Avda Complutense 22, 28040 Madrid (Spain)]. E-mail: isc@csn.es; Naito, M. [Nuclear Waste Management Organization of Japan (NUMO), 4-1-23 Shiba, Minato-ku, Tokyo, 108-0014 (Japan); Thorne, M.C. [Mike Thorne and Associates Limited, Abbotsleigh, Kebroyd Mount, Ripponden, Halifax, West Yorkshire HX6 3JA (United Kingdom); Walke, R. [Enviros QuantiSci, Building D5, Culham Science Centre, Culham, Oxfordshire OX14 3DB (United Kingdom)

2005-07-01

Safety assessment is a tool which, by means of an iterative procedure, allows the evaluation of the performance of a disposal system and its potential impact on human health and the environment. Radionuclides from a deep geological disposal facility may not reach the surface environment until many tens of thousands of years after closure of the facility. The BIOMASS Programme on BIOsphere Modelling and ASSessment developed Examples of 'Reference Biospheres' to illustrate the use of the methodology and to demonstrate how biosphere models can be developed and justified as being fit for purpose. The practical examples are also intended to be useful in their own right. The Example Reference Biosphere 2B presented here involves the consideration of alternative types of geosphere-biosphere interfaces and calculation of doses to members of hypothetical exposure groups arising from a wide range of exposure pathways within agricultural and semi-natural environments, but without allowing for evolution of the corresponding biosphere system. The example presented can be used as a generic analysis in some situations although it was developed around a relatively specific conceptual model. It should be a useful practical example, but the above numerical results are not intended to be understood as prescribed biosphere 'conversion factors'.

Natural releases from contaminated groundwater, Example Reference Biosphere 2B

International Nuclear Information System (INIS)

Simon, I.; Naito, M.; Thorne, M.C.; Walke, R.

2005-01-01

Safety assessment is a tool which, by means of an iterative procedure, allows the evaluation of the performance of a disposal system and its potential impact on human health and the environment. Radionuclides from a deep geological disposal facility may not reach the surface environment until many tens of thousands of years after closure of the facility. The BIOMASS Programme on BIOsphere Modelling and ASSessment developed Examples of 'Reference Biospheres' to illustrate the use of the methodology and to demonstrate how biosphere models can be developed and justified as being fit for purpose. The practical examples are also intended to be useful in their own right. The Example Reference Biosphere 2B presented here involves the consideration of alternative types of geosphere-biosphere interfaces and calculation of doses to members of hypothetical exposure groups arising from a wide range of exposure pathways within agricultural and semi-natural environments, but without allowing for evolution of the corresponding biosphere system. The example presented can be used as a generic analysis in some situations although it was developed around a relatively specific conceptual model. It should be a useful practical example, but the above numerical results are not intended to be understood as prescribed biosphere 'conversion factors'

Classification Scheme for Centuries of Reconstructed Streamflow Droughts in Water Resources Planning

Science.gov (United States)

Stagge, J.; Rosenberg, D. E.

2017-12-01

New advances in reconstructing streamflow from tree rings have permitted the reconstruction of flows back to the 1400s or earlier at a monthly, rather than annual, time scale. This is a critical step for incorporating centuries of streamflow reconstructions into water resources planning. Expanding the historical record is particularly important where the observed record contains few of these rare, but potentially disastrous extreme events. We present how a paleo-drought clustering approach was incorporated alongside more traditional water management planning in the Weber River basin, northern Utah. This study used newly developed monthly reconstructions of flow since 1430 CE and defined drought events as flow less than the 50th percentile during at least three contiguous months. Characteristics for each drought event included measures of drought duration, severity, cumulative loss, onset, seasonality, recession rate, and recovery rate. Reconstructed drought events were then clustered by hierarchical clustering to determine distinct drought "types" and the historical event that best represents the centroid of each cluster. The resulting 144 reconstructed drought events in the Weber basin clustered into nine distinct types, of which four were severe enough to potentially require drought management. Using the characteristic drought event for each of the severe drought clusters, water managers were able to estimate system reliability and the historical return frequency for each drought type. Plotting drought duration and severity from centuries of historical reconstructed events alongside observed events and climate change projections further placed recent events into a historical context. For example, the drought of record for the Weber River remains the most severe event in the record with regard to minimum flow percentile (1930, 7 years), but is far from the longest event in the longer historical record, where events beginning in 1658 and 1705 both lasted longer

The False Consensus Effect: Deconstruction and Reconstruction of an Anomaly

OpenAIRE

Dirk Engelmann; Martin Strobel

2004-01-01

We present a striking example of the deconstruction and reconstruction or an anomaly. In line with previous experiments we show in a one-shot setting that the allegedly robust false consensus effect disappears if representative information is readily available. But the effect reappears if a small cognitive effort is required to retrieve the information. Most subjects apparently ignore valuable information if it is not handed to them on a silver platter. We conclude that the relevance of the f...

InnovationCity Ruhr: a prime example for social and technological innovation

OpenAIRE

Götting, Adrian

2014-01-01

The project “InnovationCity Ruhr” deals with the reconstruction of the city of Bottrop with regard to energy saving measures. The aim is to make the city more environmental friendly in order to create a model for other industrial cities. Until the conclusion of the project in the year 2020, it is planned to change the surface of Bottrop in several positive ways. This paper focuses on the description of the project to give the reader an example of what exactly is done within the scope of Innov...

DYNAMICS OF COGNITIVE FUNCTION OF PATIENTS WITH DEFECTS OF THE SKULL AFTER RECONSTRUCTIVE SURGERY

Directory of Open Access Journals (Sweden)

E. V. Sinbukhova

2017-01-01

Full Text Available Due to  the  high social significance of traumatic  brain injury and its consequences,  dynamics of cognitive functions  at  the  background  of the reduction of reconstructive and plastic surgery is of interest to researchers in the world, but this topic is not sufficiently studied. A large number of patients with bone defects of the skull due to a traumatic  brain injury and skull defects after surgery for tumors, and as a consequence of possible cognitive deficits of these patients  makes it necessary to study and assess the possibility of its compensation  as a result of reconstructive  plastic surgery of the skull. Material and methods. In our study, we examined 54 patients  (12 women and 42 men in surgical treatment neurotrauma department (reconstructive  surgery after traumatic  brain injury or skull defect after surgical removal of tumors. The average age of patients  is33,09 years. All patients  were examined by a psychologist before surgery, and on the first, third, and seventh-eighth day after the surgery. MoCA, FAB, Schulte tables, HADS, Spielberger-Hanin anxiety test, a set of stimulus materials for neuropsychological diagnosis, all patients were asked to subjectively evaluate their appearance:  until defect acquisition prior to surgery after treatment (see questionnaire  by Sinbukhova E.[8], also was used projective drawing method, where patients were asked to perform a series of drawings on the given topics. In our study to reduce the high level of situational and personal anxiety of the patients they had Art-therapy sessions with a psychologist before surgery and from the second day after it. The purpose of research is to study the changes in cognitive function, level of depression, anxiety of patients  with postoperative bone defects of the skull after a reconstructive-plastic surgery. Keywords cognitive function, depression, anxiety, reconstructive  surgery. Results On the 3 days after surgery, a

Situational Method Engineering

OpenAIRE

Henderson-Sellers, Brian; Ralyte, Jolita; Par, Agerfalk; Rossi, Matti

2014-01-01

While previously available methodologies for software – like those published in the early days of object technology – claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all t...

Computed Tomography Image Quality Evaluation of a New Iterative Reconstruction Algorithm in the Abdomen (Adaptive Statistical Iterative Reconstruction-V) a Comparison With Model-Based Iterative Reconstruction, Adaptive Statistical Iterative Reconstruction, and Filtered Back Projection Reconstructions.

Science.gov (United States)

Goodenberger, Martin H; Wagner-Bartak, Nicolaus A; Gupta, Shiva; Liu, Xinming; Yap, Ramon Q; Sun, Jia; Tamm, Eric P; Jensen, Corey T

The purpose of this study was to compare abdominopelvic computed tomography images reconstructed with adaptive statistical iterative reconstruction-V (ASIR-V) with model-based iterative reconstruction (Veo 3.0), ASIR, and filtered back projection (FBP). Abdominopelvic computed tomography scans for 36 patients (26 males and 10 females) were reconstructed using FBP, ASIR (80%), Veo 3.0, and ASIR-V (30%, 60%, 90%). Mean ± SD patient age was 32 ± 10 years with mean ± SD body mass index of 26.9 ± 4.4 kg/m. Images were reviewed by 2 independent readers in a blinded, randomized fashion. Hounsfield unit, noise, and contrast-to-noise ratio (CNR) values were calculated for each reconstruction algorithm for further comparison. Phantom evaluation of low-contrast detectability (LCD) and high-contrast resolution was performed. Adaptive statistical iterative reconstruction-V 30%, ASIR-V 60%, and ASIR 80% were generally superior qualitatively compared with ASIR-V 90%, Veo 3.0, and FBP (P ASIR-V 60% with respective CNR values of 5.54 ± 2.39, 8.78 ± 3.15, and 3.49 ± 1.77 (P ASIR 80% had the best and worst spatial resolution, respectively. Adaptive statistical iterative reconstruction-V 30% and ASIR-V 60% provided the best combination of qualitative and quantitative performance. Adaptive statistical iterative reconstruction 80% was equivalent qualitatively, but demonstrated inferior spatial resolution and LCD.

SLAM-based dense surface reconstruction in monocular Minimally Invasive Surgery and its application to Augmented Reality.

Science.gov (United States)

Chen, Long; Tang, Wen; John, Nigel W; Wan, Tao Ruan; Zhang, Jian Jun

2018-05-01

based on a robust 3D calibration. We demonstrate the clinical relevance of our proposed system through two examples: (a) measurement of the surface; (b) depth cues in monocular endoscopy. The performance and accuracy evaluations of the proposed framework consist of two steps. First, we have created a computer-generated endoscopy simulation video to quantify the accuracy of the camera tracking by comparing the results of the video camera tracking with the recorded ground-truth camera trajectories. The accuracy of the surface reconstruction is assessed by evaluating the Root Mean Square Distance (RMSD) of surface vertices of the reconstructed mesh with that of the ground truth 3D models. An error of 1.24 mm for the camera trajectories has been obtained and the RMSD for surface reconstruction is 2.54 mm, which compare favourably with previous approaches. Second, in vivo laparoscopic videos are used to examine the quality of accurate AR based annotation and measurement, and the creation of depth cues. These results show the potential promise of our geometry-aware AR technology to be used in MIS surgical scenes. The results show that the new framework is robust and accurate in dealing with challenging situations such as the rapid endoscopy camera movements in monocular MIS scenes. Both camera tracking and surface reconstruction based on a sparse point cloud are effective and operated in real-time. This demonstrates the potential of our algorithm for accurate AR localization and depth augmentation with geometric cues and correct surface measurements in MIS with monocular endoscopes. Copyright © 2018 Elsevier B.V. All rights reserved.

PET scanning in plastic and reconstructive surgery.

Science.gov (United States)

Liodaki, Eirini; Eirini, Liodaki; Liodakis, Emmanouil; Emmanouil, Liodakis; Papadopoulos, Othonas; Othonas, Papadopoulos; Machens, Hans-Günther; Hans-Günther, Machens; Papadopulos, Nikolaos A; Nikolaos, Papadopulos A

2012-02-01

In this report we highlight the use of PET scan in plastic and reconstructive surgery. PET scanning is a very important tool in plastic surgery oncology (melanoma, soft-tissue sarcomas and bone sarcomas, head and neck cancer, peripheral nerve sheath tumors of the extremities and breast cancer after breast esthetic surgery), as diagnosis, staging, treatment planning and follow-up of cancer patients is based on imaging. PET scanning seems also to be useful as a flap monitoring system as well as an infection's imaging tool, for example in the management of diabetic foot ulcer. PET also contributes to the understanding of pathophysiology of keloids which remain a therapeutic challenge.

TYPOLOGY OF COUNTRIES OF THE WORLD ACCORDING TO THE STATE OF FOOD SITUATION

Directory of Open Access Journals (Sweden)

Małgorzata Kołodziejczak

2016-06-01

Full Text Available The aim of the paper was to isolate, from countries where there is the biggest problem of malnutrition, groups which are similar according to the food situation. The research was based on the data of the Food and Agriculture Organization of the United Nations (FAO. The analysis covered 115 countries, where according to the FAO there is the highest level of malnutrition. The method of comparative analysis was used in the research and the process of grouping of countries according to the determinants of food situation was conducted with the use of cluster analysis. The research applied to the period 2012-2014. The typology of the countries let us to identify the most important factors determining the food situation in each cluster. There are historical events, national wealth or poverty which was accumulated over the time, natural conditions, as well as cultural and political conditions. Examples of relatively rich countries, where the malnutrition problem also appears, indicate the importance of income inequality.

Le séisme de Pisco du 15 août 2007 : entre urgence et reconstruction

Directory of Open Access Journals (Sweden)

Hugo Perfettini

2007-12-01

Full Text Available Plus de trois mois ont passé depuis le séisme qui, sur la côte péruvienne, à 200 km au sud de Lima, a tué plus de 500 personnes. Le nombre de victimes est faible au regard des dégâts matériels enregistrés mais le nombre de sinistrés est très élevé. Alors que l’événement est presque oublié à l’échelle internationale, plusieurs dizaines de milliers de personnes vivent toujours dans des conditions précaires dans les abris provisoires fournis par les secours d’urgence, en attendant que ne s’engage le processus de reconstruction. Dans ce contexte, l’objectif de cet article est de procéder à un premier bilan des caractéristiques du séisme, de ses effets différentiels, de la gestion de la crise et de la situation actuelle qui oscille entre urgence et reconstruction.More than three months have passed since the earthquake, on the Peruvian coast, 200 km south of Lima, killed more than 500 people. The number of casualties is small in comparison with the damage recorded, but the number of homeless people is very high. While the event is almost forgotten at the international level, tens of thousands of people are still living in precarious conditions in the temporary shelters provided by the emergency, until begins the reconstruction process. In this context, the objective of this article is to make an initial assessment of the characteristics of the earthquake and its effects, the management of the crisis and the current situation that oscillates between relief and reconstruction.

Four-dimensional cone beam CT reconstruction and enhancement using a temporal nonlocal means method

Energy Technology Data Exchange (ETDEWEB)

Jia Xun; Tian Zhen; Lou Yifei; Sonke, Jan-Jakob; Jiang, Steve B. [Center for Advanced Radiotherapy Technologies and Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California 92037 (United States); School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, Georgia 30318 (United States); Department of Radiation Oncology, Netherlands Cancer Institute-Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Center for Advanced Radiotherapy Technologies and Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California 92037 (United States)

2012-09-15

Purpose: Four-dimensional cone beam computed tomography (4D-CBCT) has been developed to provide respiratory phase-resolved volumetric imaging in image guided radiation therapy. Conventionally, it is reconstructed by first sorting the x-ray projections into multiple respiratory phase bins according to a breathing signal extracted either from the projection images or some external surrogates, and then reconstructing a 3D CBCT image in each phase bin independently using FDK algorithm. This method requires adequate number of projections for each phase, which can be achieved using a low gantry rotation or multiple gantry rotations. Inadequate number of projections in each phase bin results in low quality 4D-CBCT images with obvious streaking artifacts. 4D-CBCT images at different breathing phases share a lot of redundant information, because they represent the same anatomy captured at slightly different temporal points. Taking this redundancy along the temporal dimension into account can in principle facilitate the reconstruction in the situation of inadequate number of projection images. In this work, the authors propose two novel 4D-CBCT algorithms: an iterative reconstruction algorithm and an enhancement algorithm, utilizing a temporal nonlocal means (TNLM) method. Methods: The authors define a TNLM energy term for a given set of 4D-CBCT images. Minimization of this term favors those 4D-CBCT images such that any anatomical features at one spatial point at one phase can be found in a nearby spatial point at neighboring phases. 4D-CBCT reconstruction is achieved by minimizing a total energy containing a data fidelity term and the TNLM energy term. As for the image enhancement, 4D-CBCT images generated by the FDK algorithm are enhanced by minimizing the TNLM function while keeping the enhanced images close to the FDK results. A forward-backward splitting algorithm and a Gauss-Jacobi iteration method are employed to solve the problems. The algorithms implementation on

RECONSTRUCTION OF FACIAL SKIN DEFECT BY VARIOUS FLAPS : OUR EXPERIENCE

Directory of Open Access Journals (Sweden)

Atishkumar B.

2015-08-01

Full Text Available INTRODUCTION : Face represents complete personality of human being. Cosmetically it is very important part of a person especially for woman. There are many situations when due to disease or trauma, facial defect arises, which requires reconstruction by either local or distant surgical flaps . METHODS AND MATERIALS : In rural places, we come across many patients suffering from trauma and skin malignancy of face. These patients require reconstruction done esthetically with local flaps. Objective of this study is to share our exper ience of providing esthetically good results at our secondary referral care center. Hereby, we present case series of 14 patients operated at our institute. These patients were analyzed according to the age, sex, nature of injury and anatomical location of lesion on the face. All these patients were operated and reconstruction of defect was done with various local flaps best suited for respective lesion, under local anesthesia or sedation. Post - operative nature of wound was analyzed for flap viability or fl ap necrosis . RESULTS : Amongst them were 7 male and 7 female, ages ranging from 4 to 80 years. 7out of 14 patients were of basal cell carcinoma, 4 were due to trauma, 2 were due to dog bite and 1 case of recurrent pleomorphic adenoma at root of nose. All patients had excellent flap viability at end of 6 months and flap achieving almost similar color and contour as that of surrounding skin. CONCLUSION : Reconstruction of facial defects by local flaps is very easy and cost effective technique. This can be don e even at secondary referral care centre with minimal availability of facilities

Image Reconstruction. Chapter 13

Energy Technology Data Exchange (ETDEWEB)

Nuyts, J. [Department of Nuclear Medicine and Medical Imaging Research Center, Katholieke Universiteit Leuven, Leuven (Belgium); Matej, S. [Medical Image Processing Group, Department of Radiology, University of Pennsylvania, Philadelphia, PA (United States)

2014-12-15

This chapter discusses how 2‑D or 3‑D images of tracer distribution can be reconstructed from a series of so-called projection images acquired with a gamma camera or a positron emission tomography (PET) system [13.1]. This is often called an ‘inverse problem’. The reconstruction is the inverse of the acquisition. The reconstruction is called an inverse problem because making software to compute the true tracer distribution from the acquired data turns out to be more difficult than the ‘forward’ direction, i.e. making software to simulate the acquisition. There are basically two approaches to image reconstruction: analytical reconstruction and iterative reconstruction. The analytical approach is based on mathematical inversion, yielding efficient, non-iterative reconstruction algorithms. In the iterative approach, the reconstruction problem is reduced to computing a finite number of image values from a finite number of measurements. That simplification enables the use of iterative instead of mathematical inversion. Iterative inversion tends to require more computer power, but it can cope with more complex (and hopefully more accurate) models of the acquisition process.

Coordinate reconstruction using box reconstruction and projection of X-ray photo

International Nuclear Information System (INIS)

Achmad Suntoro

2011-01-01

Some mathematical formula have been derived for a process of reconstruction to define the coordinate of any point relative to a pre set coordinate system. The process of reconstruction uses a reconstruction box in which each edge's length of the box is known, each top-bottom face and left-right face of the box having a cross marker, and the top face and the right face of the box as plane projections by X-ray source in perspective projection -system. Using the data of the two X-ray projection images, any point inside the reconstruction box, as long as its projection is recorded in the two photos, will be determined its coordinate relative to the midpoint of the reconstruction box as the central point coordinates. (author)

Health goal priming as a situated intervention tool: how to benefit from nonconscious motivational routes to health behaviour.

Science.gov (United States)

Papies, Esther K

2016-12-01

Recent research has shown the limited effects of intentions on behaviour, so that novel methods to facilitate behaviour change are needed that do not rely on conscious intentions. Here, it is argued that nonintentional effects on health behaviour, such as the effects of habits, impulses, and nonconscious goals, occur through the activation of cognitive structures by specific situations. Interventions should therefore be situated to change these effects, either by changing the critical cognitive structures (training interventions), or by changing which cognitive structures get activated (cueing interventions). The current article presents this framework for situated interventions, as well as examples of interventions of each type. Then, it introduces goal priming as a cueing intervention tool to activate health goals and thus facilitate healthier behaviour, even in tempting situations that typically activate short-term hedonic goals. Following a review of empirical evidence, five principles for the effective application of health goal primes are proposed, namely (1) to target individuals who value the primed goals, (2) by activating their specific motivation, (3) through effective cues (4) that attract attention at the right time. Finally, (5) an effective goal-directed behaviour needs to be known and accessible to the primed individual. These principles are illustrated with examples of different health behaviours in order to facilitate their application for successful behaviour change.

Stochastic Reconstruction and Interpolation of Precipitation Fields Using Combined Information of Commercial Microwave Links and Rain Gauges

Science.gov (United States)

Haese, B.; Hörning, S.; Chwala, C.; Bárdossy, A.; Schalge, B.; Kunstmann, H.

2017-12-01

For the reconstruction and interpolation of precipitation fields, we present the application of a stochastic approach called Random Mixing. Generated fields are based on a data set consisting of rain gauge observations and path-averaged rain rates estimated using Commercial Microwave Link (CML) derived information. Precipitation fields are received as linear combination of unconditional spatial random fields, where the spatial dependence structure is described by copulas. The weights of the linear combination are optimized such that the observations and the spatial structure of the precipitation observations are reproduced. The innovation of the approach is that this strategy enables the simulation of ensembles of precipitation fields of any size. Each ensemble member is in concordance with the observed path-averaged CML derived rain rates and additionally reflects the observed rainfall variability along the CML paths. The ensemble spread allows additionally an estimation of the uncertainty of the reconstructed precipitation fields. The method is demonstrated both for a synthetic data set and a real-world data set in South Germany. While the synthetic example allows an evaluation against a known reference, the second example demonstrates the applicability for real-world observations. Generated precipitation fields of both examples reproduce the spatial precipitation pattern in good quality. A performance evaluation of Random Mixing compared to Ordinary Kriging demonstrates an improvement of the reconstruction of the observed spatial variability. Random Mixing is concluded to be a beneficial new approach for the provision of precipitation fields and ensembles of them, in particular when different measurement types are combined.

Capabilities of using white x-rays for the reconstruction of surface morphology from coherent reflectivity

Energy Technology Data Exchange (ETDEWEB)

Sant, Tushar, E-mail: tushar@physik.uni-siegen.de [Solid State Physics Group, University of Siegen, 57068 Siegen (Germany); Panzner, Tobias [Paul Scherrer Institute (Switzerland); Pietsch, Ullrich [Solid State Physics Group, University of Siegen, 57068 Siegen (Germany)

2010-10-15

We present a new method to reconstruct the surface profile of a sample from coherent reflectivity data of a white x-ray beam experiment. As an example the surface profile of a laterally confined silicon wafer has been reconstructed quantitatively from static speckle measurements using white coherent x-rays from a bending magnet in the energy range between 5 < E < 20 keV. As a consequence of using white radiation, speckles appear in addition to the Airy pattern caused by scattering at the entrance pinhole. Nevertheless, the surface profile of a triangularly shaped specimen was reconstructed considering sufficient oversampling between the beam-footprint and the effective sample width. For the profile reconstruction the Error-Reduction phase retrieval algorithm was modified by including the spectral illumination function and a Fresnel propagator term. The simultaneous use of different x-ray energies having different penetration depth provides information on the evolution of the surface profile from the near-surface towards the bulk. The limitations of present experiment can be overcome using white or pink radiation from a source with higher photon flux.

Comparison of methods for suppressing edge and aliasing artefacts in iterative x-ray CT reconstruction

International Nuclear Information System (INIS)

Zbijewski, Wojciech; Beekman, Freek J

2006-01-01

X-ray CT images obtained with iterative reconstruction (IR) can be hampered by the so-called edge and aliasing artefacts, which appear as interference patterns and severe overshoots in the areas of sharp intensity transitions. Previously, we have demonstrated that these artefacts are caused by discretization errors during the projection simulation step in IR. Although these errors are inherent to IR, they can be adequately suppressed by reconstruction on an image grid that is finer than that typically used for analytical methods such as filtered back-projection. Two other methods that may prevent edge artefacts are: (i) smoothing the projections prior to reconstruction or (ii) using an image representation different from voxels; spherically symmetric Kaiser-Bessel functions are a frequently employed example of such a representation. In this paper, we compare reconstruction on a fine grid with the two above-mentioned alternative strategies for edge artefact reduction. We show that the use of a fine grid results in a more adequate suppression of artefacts than the smoothing of projections or using the Kaiser-Bessel image representation

Training Self-Regulated Learning Skills with Video Modeling Examples: Do Task-Selection Skills Transfer?

Science.gov (United States)

Raaijmakers, Steven F.; Baars, Martine; Schaap, Lydia; Paas, Fred; van Merriënboer, Jeroen; van Gog, Tamara

2018-01-01

Self-assessment and task-selection skills are crucial in self-regulated learning situations in which students can choose their own tasks. Prior research suggested that training with video modeling examples, in which another person (the model) demonstrates and explains the cyclical process of problem-solving task performance, self-assessment, and…

Segmentation-DrivenTomographic Reconstruction

DEFF Research Database (Denmark)

Kongskov, Rasmus Dalgas

such that the segmentation subsequently can be carried out by use of a simple segmentation method, for instance just a thresholding method. We tested the advantages of going from a two-stage reconstruction method to a one stage segmentation-driven reconstruction method for the phase contrast tomography reconstruction......The tomographic reconstruction problem is concerned with creating a model of the interior of an object from some measured data, typically projections of the object. After reconstructing an object it is often desired to segment it, either automatically or manually. For computed tomography (CT...

Situational method engineering

CERN Document Server

Henderson-Sellers, Brian; Ågerfalk, Pär J; Rossi, Matti

2014-01-01

While previously available methodologies for software ? like those published in the early days of object technology ? claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all the bits and pieces needed for an organization to develop software, including the software process, the

Example and Non-Example Pada Pembelajaran Matematika

OpenAIRE

Yunarto, Wanda Nugroho

2016-01-01

Abstrak Example and Non-Example Learning Model merupakan model pembelajaran yang menggunakan gambar sebagai media pembelajaran yang bertujuan mendorong mahasiswa untuk belajar berfikir kritis dengan jalan memecahkan permasalahan-permasalahan yang terkandung dalam contoh-contoh permasalahan/ konsep yang disajikan. Tujuan dari penelitian ini adalah mendapatkan gambaran mengenai bagaimana penerapan model pembelajaran Example and non-Example pada mahasiswa program studi Pendidikan Matematika Univ...

Can phytoliths and lipid biomarkers constrain and refine isotopic palaeoclimatic reconstructions? Insights from the Homa Peninsula, western Kenya

Science.gov (United States)

Vincent, Thomas; Whitfield, Elizabeth; Bishop, Laura; Plummer, Thomas; Ditchfield, Peter; Blumenthal, Scott; Finestone, Emma; Kiriakoulakis, Kostas

2017-04-01

Several archaeological sites on the Homa Peninsula, western Kenya, host Plio-Pleistocene sedimentary sequences that contain hominin archaeological traces and faunal remains. As a result, the region preserves rare palaeoanthropological information of a crucial time period in East Africa. By reconstructing the palaeoenvironmental substrate here, a deeper understanding of hominin activities and behaviour in variable landscapes will be gained. This is the aim of the current research, which utilises a multiproxy approach to reconstruct the palaeoenvironment, encompassing analyses of particle size, phytoliths and lipid biomarkers. Previous work at the most extensively studied site on the peninsula, Kanjera South, has shown sediments containing archaeological occurrences to be ca. 2 Ma in age. Reconstructions of the palaeoenvironment here have largely been based on field investigations and isotopic analysis of pedogenic/palaeosol carbonates and tooth enamel, which revealed clear evidence of a grassland setting (>75% C4 vegetation). However, in order to form robust and reliable reconstructions of palaeoclimate, information derived from a single proxy is insufficient. For example, the prolonged and seasonally biased formation of pedogenic carbonates can mask seasonal fluctuations in vegetation, causing variable environmental settings to be overlooked when using isotope data from this source. Soil organic matter offers another source of isotope data, however 13C enrichment from plant carbon may also introduce uncertainty here. Resultantly, due to the significance of the site, it is essential that reconstructions of the palaeoclimate, palaeovegetation and palaeoenvironment as a whole are robust and reliable, and so multiproxy evidence is essential. Here, we present the use of phytoliths and lipid biomarkers to provide further insights into the C3/C4 vegetation distribution on the peninsula, and consequently act as proxies for palaeoclimate and palaeovegetation. Both

China's gas market under new situations: Trends and countermeasures – Taking Sichuan and Chongqing gas provinces as an example

Directory of Open Access Journals (Sweden)

Zi'ang Jiang

2016-05-01

Full Text Available The world oil and gas market has entered a new period of low oil prices, which has inevitably affected the natural gas market in China. So, it is urgent to timely study the market trends and to actively seek for appropriate countermeasures. In this paper, the development trends of China's gas market under the situations of New Normal and low oil prices were analyzed from the perspective of sustainable development of the natural gas industrial chain and market, by taking the Sichuan and Chongqing gas provinces as an example, which are of representative and of great significance to China in its natural gas market. The following trends were identified. First, the gas market reform will be deepened. Second, the competition among major market players will be intensified. Third, supply will exceed demand. Fourth, export tasks will be difficult. Fifth, higher demand of “guarantees of the minimum GDP, tax and profit” will be raised for local government. And sixth, low-cost strategy will be indispensable to oil and gas enterprises. In order to cater to these trends, some countermeasures were presented during the 13th Five-Year Plan. First, to improve the natural gas market system, to strengthen the supply-side reform, to complete market development modes, and to promote the introduction of governmental policies for relevant industries. Second, to develop the efficient gas-consuming clusters such as industrial parks, LNG-fueled vehicles and vessels, and distributed energy sources system, to establish innovative marketing strategy systems, and to boost the localization of resource consumption, through the establishment of strategic alliances for natural gas terminal markets in partnership with local governments and competitive enterprises, while the Chinese government is intensifying efforts in promoting energy conservation and pollution reduction and haze control. Third, to improve the cobweb pipeline network system, and to establish the strategic

Real-time position reconstruction with hippocampal place cells.

Science.gov (United States)

Guger, Christoph; Gener, Thomas; Pennartz, Cyriel M A; Brotons-Mas, Jorge R; Edlinger, Günter; Bermúdez I Badia, S; Verschure, Paul; Schaffelhofer, Stefan; Sanchez-Vives, Maria V

2011-01-01

Brain-computer interfaces (BCI) are using the electroencephalogram, the electrocorticogram and trains of action potentials as inputs to analyze brain activity for communication purposes and/or the control of external devices. Thus far it is not known whether a BCI system can be developed that utilizes the states of brain structures that are situated well below the cortical surface, such as the hippocampus. In order to address this question we used the activity of hippocampal place cells (PCs) to predict the position of an rodent in real-time. First, spike activity was recorded from the hippocampus during foraging and analyzed off-line to optimize the spike sorting and position reconstruction algorithm of rats. Then the spike activity was recorded and analyzed in real-time. The rat was running in a box of 80 cm × 80 cm and its locomotor movement was captured with a video tracking system. Data were acquired to calculate the rat's trajectories and to identify place fields. Then a Bayesian classifier was trained to predict the position of the rat given its neural activity. This information was used in subsequent trials to predict the rat's position in real-time. The real-time experiments were successfully performed and yielded an error between 12.2 and 17.4% using 5-6 neurons. It must be noted here that the encoding step was done with data recorded before the real-time experiment and comparable accuracies between off-line (mean error of 15.9% for three rats) and real-time experiments (mean error of 14.7%) were achieved. The experiment shows proof of principle that position reconstruction can be done in real-time, that PCs were stable and spike sorting was robust enough to generalize from the training run to the real-time reconstruction phase of the experiment. Real-time reconstruction may be used for a variety of purposes, including creating behavioral-neuronal feedback loops or for implementing neuroprosthetic control.

A Fast CT Reconstruction Scheme for a General Multi-Core PC

Directory of Open Access Journals (Sweden)

Kai Zeng

2007-01-01

Full Text Available Expensive computational cost is a severe limitation in CT reconstruction for clinical applications that need real-time feedback. A primary example is bolus-chasing computed tomography (CT angiography (BCA that we have been developing for the past several years. To accelerate the reconstruction process using the filtered backprojection (FBP method, specialized hardware or graphics cards can be used. However, specialized hardware is expensive and not flexible. The graphics processing unit (GPU in a current graphic card can only reconstruct images in a reduced precision and is not easy to program. In this paper, an acceleration scheme is proposed based on a multi-core PC. In the proposed scheme, several techniques are integrated, including utilization of geometric symmetry, optimization of data structures, single-instruction multiple-data (SIMD processing, multithreaded computation, and an Intel C++ compilier. Our scheme maintains the original precision and involves no data exchange between the GPU and CPU. The merits of our scheme are demonstrated in numerical experiments against the traditional implementation. Our scheme achieves a speedup of about 40, which can be further improved by several folds using the latest quad-core processors.

A fast CT reconstruction scheme for a general multi-core PC.

Science.gov (United States)

Zeng, Kai; Bai, Erwei; Wang, Ge

2007-01-01

Expensive computational cost is a severe limitation in CT reconstruction for clinical applications that need real-time feedback. A primary example is bolus-chasing computed tomography (CT) angiography (BCA) that we have been developing for the past several years. To accelerate the reconstruction process using the filtered backprojection (FBP) method, specialized hardware or graphics cards can be used. However, specialized hardware is expensive and not flexible. The graphics processing unit (GPU) in a current graphic card can only reconstruct images in a reduced precision and is not easy to program. In this paper, an acceleration scheme is proposed based on a multi-core PC. In the proposed scheme, several techniques are integrated, including utilization of geometric symmetry, optimization of data structures, single-instruction multiple-data (SIMD) processing, multithreaded computation, and an Intel C++ compilier. Our scheme maintains the original precision and involves no data exchange between the GPU and CPU. The merits of our scheme are demonstrated in numerical experiments against the traditional implementation. Our scheme achieves a speedup of about 40, which can be further improved by several folds using the latest quad-core processors.

Vaginal reconstruction

International Nuclear Information System (INIS)

Lesavoy, M.A.

1985-01-01

Vaginal reconstruction can be an uncomplicated and straightforward procedure when attention to detail is maintained. The Abbe-McIndoe procedure of lining the neovaginal canal with split-thickness skin grafts has become standard. The use of the inflatable Heyer-Schulte vaginal stent provides comfort to the patient and ease to the surgeon in maintaining approximation of the skin graft. For large vaginal and perineal defects, myocutaneous flaps such as the gracilis island have been extremely useful for correction of radiation-damaged tissue of the perineum or for the reconstruction of large ablative defects. Minimal morbidity and scarring ensue because the donor site can be closed primarily. With all vaginal reconstruction, a compliant patient is a necessity. The patient must wear a vaginal obturator for a minimum of 3 to 6 months postoperatively and is encouraged to use intercourse as an excellent obturator. In general, vaginal reconstruction can be an extremely gratifying procedure for both the functional and emotional well-being of patients

Robust Sensor Faults Reconstruction for a Class of Uncertain Linear Systems Using a Sliding Mode Observer: An LMI Approach

International Nuclear Information System (INIS)

Iskander, Boulaabi; Faycal, Ben Hmida; Moncef, Gossa; Anis, Sellami

2009-01-01

This paper presents a design method of a Sliding Mode Observer (SMO) for robust sensor faults reconstruction of systems with matched uncertainty. This class of uncertainty requires a known upper bound. The basic idea is to use the H ∞ concept to design the observer, which minimizes the effect of the uncertainty on the reconstruction of the sensor faults. Specifically, we applied the equivalent output error injection concept from previous work in Fault Detection and Isolation (FDI) scheme. Then, these two problems of design and reconstruction can be expressed and numerically formulate via Linear Matrix Inequalities (LMIs) optimization. Finally, a numerical example is given to illustrate the validity and the applicability of the proposed approach.

Situativity theory: a perspective on how participants and the environment can interact: AMEE Guide no. 52.

Science.gov (United States)

Durning, Steven J; Artino, Anthony R

2011-01-01

Situativity theory refers to theoretical frameworks which argue that knowledge, thinking, and learning are situated (or located) in experience. The importance of context to these theories is paramount, including the unique contribution of the environment to knowledge, thinking, and learning; indeed, they argue that knowledge, thinking, and learning cannot be separated from (they are dependent upon) context. Situativity theory includes situated cognition, situated learning, ecological psychology, and distributed cognition. In this Guide, we first outline key tenets of situativity theory and then compare situativity theory to information processing theory; we suspect that the reader may be quite familiar with the latter, which has prevailed in medical education research. Contrasting situativity theory with information processing theory also serves to highlight some unique potential contributions of situativity theory to work in medical education. Further, we discuss each of these situativity theories and then relate the theories to the clinical context. Examples and illustrations for each of the theories are used throughout. We will conclude with some potential considerations for future exploration. Some implications of situativity theory include: a new way of approaching knowledge and how experience and the environment impact knowledge, thinking, and learning; recognizing that the situativity framework can be a useful tool to "diagnose" the teaching or clinical event; the notion that increasing individual responsibility and participation in a community (i.e., increasing "belonging") is essential to learning; understanding that the teaching and clinical environment can be complex (i.e., non-linear and multi-level); recognizing that explicit attention to how participants in a group interact with each other (not only with the teacher) and how the associated learning artifacts, such as computers, can meaningfully impact learning.

Effect of site-specific heterogeneous evolution on phylogenetic reconstruction: a simple evaluation.

Science.gov (United States)

Cheng, Qiqun; Su, Zhixi; Zhong, Yang; Gu, Xun

2009-07-15

Recent studies have shown that heterogeneous evolution may mislead phylogenetic analysis, which has been neglected for a long time. We evaluate the effect of heterogeneous evolution on phylogenetic analysis, using 18 fish mitogenomic coding sequences as an example. Using the software DIVERGE, we identify 198 amino acid sites that have experienced heterogeneous evolution. After removing these sites, the rest of sites are shown to be virtually homogeneous in the evolutionary rate. There are some differences between phylogenetic trees built with heterogeneous sites ("before tree") and without heterogeneous sites ("after tree"). Our study demonstrates that for phylogenetic reconstruction, an effective approach is to identify and remove sites with heterogeneous evolution, and suggests that researchers can use the software DIVERGE to remove the influence of heterogeneous evolution before reconstructing phylogenetic trees.

METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

Directory of Open Access Journals (Sweden)

Tetyana KOVALCHUK

2016-07-01

Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

The situation of radiation oncology patients' relatives. A stocktaking; Die Situation der Angehoerigen von Strahlentherapiepatienten. Eine Bestandsaufnahme

Energy Technology Data Exchange (ETDEWEB)

Momm, Felix; Lingg, Sabine; Adebahr, Sonja; Grosu, Anca-Ligia [Klinik fuer Strahlenheilkunde, Univ. Freiburg (Germany); Xander, Carola; Becker, Gerhild [Palliativeinheit, Univ. Freiburg (Germany)

2010-06-15

Background and Purpose: Recent studies have shown a very high importance of relatives in decisions about medical interventions. Therefore, the situation of this group was investigated in the sense of a stocktaking by interviewing the closest relatives of radiotherapy patients. Interviewed Persons and Methods: In a defined span of time (6 weeks), a total of 470 relatives (evaluable: n = 287, 61%) of radiotherapy patients were interviewed by a newly developed questionnaire about their contentment with their inclusion in the therapy course. Further, they gave information about specific needs of relatives as well as proposals for direct improvements in the context of a radiation therapy. Results: In total, the relatives were satisfied with their inclusion in the radiotherapy course and with the patient care. As an example, more than 95% of the relatives agreed with the statement ''Here in the hospital my ill relative is cared for well.'' Nevertheless, direct possibilities for improvements were found in the interdisciplinary information about oncologic topics and in the organization of the therapy course. Conclusion: In the stocktaking the situation of radiotherapy patients' relatives was generally satisfactory. Further improvements for the future can be expected mainly from interdisciplinary cancer centers having the best suppositions to care for the relatives, if necessary. Structures known from palliative care can be used as a model. (orig.)

Complementary frame reconstruction: a low-biased dynamic PET technique for low count density data in projection space

International Nuclear Information System (INIS)

Hong, Inki; Cho, Sanghee; Michel, Christian J; Casey, Michael E; Schaefferkoetter, Joshua D

2014-01-01

A new data handling method is presented for improving the image noise distribution and reducing bias when reconstructing very short frames from low count dynamic PET acquisition. The new method termed ‘Complementary Frame Reconstruction’ (CFR) involves the indirect formation of a count-limited emission image in a short frame through subtraction of two frames with longer acquisition time, where the short time frame data is excluded from the second long frame data before the reconstruction. This approach can be regarded as an alternative to the AML algorithm recently proposed by Nuyts et al, as a method to reduce the bias for the maximum likelihood expectation maximization (MLEM) reconstruction of count limited data. CFR uses long scan emission data to stabilize the reconstruction and avoids modification of algorithms such as MLEM. The subtraction between two long frame images, naturally allows negative voxel values and significantly reduces bias introduced in the final image. Simulations based on phantom and clinical data were used to evaluate the accuracy of the reconstructed images to represent the true activity distribution. Applicability to determine the arterial input function in human and small animal studies is also explored. In situations with limited count rate, e.g. pediatric applications, gated abdominal, cardiac studies, etc., or when using limited doses of short-lived isotopes such as 15 O-water, the proposed method will likely be preferred over independent frame reconstruction to address bias and noise issues. (paper)

Situational Leadership

OpenAIRE

Süttö, Marián

2016-01-01

This thesis is focused on field of leadership, particularly situational leadership model by Hersey and Blanchard. Thesis is mostly theoretical framework aimed to offer the possibility for reader to get overview in leadership issues. Theoretical framework of the thesis is focused on leadership definition, the most important leadership theories in the past, and especially to situational leadership approach. The focus of this thesis is to get detailed insight in this model and therefore offer in...

The use of anatomical information for molecular image reconstruction algorithms: Attention/Scatter correction, motion compensation, and noise reduction

Energy Technology Data Exchange (ETDEWEB)

Chun, Se Young [School of Electrical and Computer Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan (Korea, Republic of)

2016-03-15

PET and SPECT are important tools for providing valuable molecular information about patients to clinicians. Advances in nuclear medicine hardware technologies and statistical image reconstruction algorithms enabled significantly improved image quality. Sequentially or simultaneously acquired anatomical images such as CT and MRI from hybrid scanners are also important ingredients for improving the image quality of PET or SPECT further. High-quality anatomical information has been used and investigated for attenuation and scatter corrections, motion compensation, and noise reduction via post-reconstruction filtering and regularization in inverse problems. In this article, we will review works using anatomical information for molecular image reconstruction algorithms for better image quality by describing mathematical models, discussing sources of anatomical information for different cases, and showing some examples.

Upgrade to iterative image reconstruction (IR) in abdominal MDCT imaging. A clinical study for detailed parameter optimization beyond vendor recommendations using the adaptive statistical iterative reconstruction environment (ASIR)

Energy Technology Data Exchange (ETDEWEB)

Mueck, F.G.; Koerner, M.; Scherr, M.K.; Geyer, L.L.; Deak, Z.; Linsenmaier, U.; Reiser, M.; Wirth, S. [Ludwig-Maximilians-Univ. Muenchen (Germany). Inst. fuer Klinische Radiologie

2012-03-15

To compare the image quality of dose-reduced 64-row abdominal CT reconstructed at different levels of adaptive statistical iterative reconstruction (ASIR) to full-dose baseline examinations reconstructed with filtered back-projection (FBP) in a clinical setting and upgrade situation. Abdominal baseline examinations (noise index NI = 29; LightSpeed VCT XT, GE) were intra-individually compared to follow-up studies on a CT with an ASIR option (NI = 43; Discovery HD750, GE), n = 42. Standard-kernel images were calculated with ASIR blendings of 0 - 100 % in slice and volume mode, respectively. Three experienced radiologists compared the image quality of these 567 sets to their corresponding full-dose baseline examination (-2: diagnostically inferior, -1: inferior, 0: equal, +1: superior, +2: diagnostically superior). Furthermore, a phantom was scanned. Statistical analysis used the Wilcoxon - the Mann-Whitney U-test and the intra-class correlation (ICC). The mean CTDIvol decreased from 19.7 {+-} 5.5 to 12.2 {+-} 4.7 mGy (p < 0.001). The ICC was 0.861. The total image quality of the dose-reduced ASIR studies was comparable to the baseline at ASIR 50 % in slice (p = 0.18) and ASIR 50 - 100 % in volume mode (p > 0.10). Volume mode performed 73 % slower than slice mode (p < 0.01). After the system upgrade, the vendor recommendation of ASIR 50 % in slice mode allowed for a dose reduction of 38 % in abdominal CT with comparable image quality and time expenditure. However, there is still further dose reduction potential for more complex reconstruction settings. (orig.)

Effects of worked examples, example-problem, and problem-example pairs on novices’ learning

NARCIS (Netherlands)

Van Gog, Tamara; Kester, Liesbeth; Paas, Fred

2010-01-01

Van Gog, T., Kester, L., & Paas, F. (2011). Effects of worked examples, example-problem, and problem-example pairs on novices’ learning. Contemporary Educational Psychology, 36(3), 212-218. doi:10.1016/j.cedpsych.2010.10.004

Breast Reconstruction After Mastectomy

Science.gov (United States)

... Cancer Prevention Genetics of Breast & Gynecologic Cancers Breast Cancer Screening Research Breast Reconstruction After Mastectomy On This Page What is breast reconstruction? How do surgeons use implants to reconstruct a woman’s breast? How do surgeons ...

Development of a dosimetric system for emergency situation involving person of the public

International Nuclear Information System (INIS)

Costa, Zelia Maria da

1999-01-01

A dosimetric system was developed for emergency situation based on electron spin resonance spectrometry (E.S.R.) and some materials such as tooth enamel, bovine bone, CaCO 3 and sugar as detector. The purpose of this work was to find common materials, which are both reliable and sensitive and make possible quickly to assess the absorbed dose. The research includes the collection and preparation of samples, the evaluation, treatment and interpretation of ESR signal and the procedure for dose reconstruction. The calibration of the dosemeter was performed using gamma radiation from a Co-60 source. The results obtained confirm the variability of the use of this system in case of an accident. (author)

Interactive Purchasing Situations

NARCIS (Netherlands)

Groote Schaarsberg, M.; Borm, P.E.M.; Hamers, H.J.M.; Reijnierse, J.H.

2012-01-01

Abstract: This paper introduces a new class of interactive cooperative purchasing situations and provides an explicit alternative characterization of the nucleolus of cooperative games, which offers an alternative to Kohlberg (1971). In our cooperative purchasing situation, the unit price of a

Evidence-Based ACL Reconstruction

Directory of Open Access Journals (Sweden)

E. Carlos RODRIGUEZ-MERCHAN

2015-01-01

Full Text Available There is controversy in the literature regarding a number of topics related to anterior cruciate ligament (ACLreconstruction. The purpose of this article is to answer the following questions: 1 Bone patellar tendon bone (BPTB reconstruction or hamstring reconstruction (HR; 2 Double bundle or single bundle; 3 Allograft or authograft; 4 Early or late reconstruction; 5 Rate of return to sports after ACL reconstruction; 6 Rate of osteoarthritis after ACL reconstruction. A Cochrane Library and PubMed (MEDLINE search of systematic reviews and meta-analysis related to ACL reconstruction was performed. The key words were: ACL reconstruction, systematic reviews and meta-analysis. The main criteria for selection were that the articles were systematic reviews and meta-analysesfocused on the aforementioned questions. Sixty-nine articles were found, but only 26 were selected and reviewed because they had a high grade (I-II of evidence. BPTB-R was associated with better postoperative knee stability but with a higher rate of morbidity. However, the results of both procedures in terms of functional outcome in the long-term were similar. The double-bundle ACL reconstruction technique showed better outcomes in rotational laxity, although functional recovery was similar between single-bundle and double-bundle. Autograft yielded better results than allograft. There was no difference between early and delayed reconstruction. 82% of patients were able to return to some kind of sport participation. 28% of patients presented radiological signs of osteoarthritis with a follow-up of minimum 10 years.

Constructing catalogue of temporal situations

Directory of Open Access Journals (Sweden)

Violetta Koseska-Toszewa

2015-11-01

absent and not understandable in the other. It leads to assign meanings to situations, rather than to linguistic forms used for their expression. The second principle is limit the discussed issues to such a piece of reality that can be possible for precise description. The third is to avoid introducing such information to the described reality that is not explicitly mentioned by linguistic means. The authors try to following these principles in the present paper. The paper is organized as follows. First, some samples of situations related to present tense are given together with examples of their expressions in four languages: English, (as a reference language and three Slavic languages, representing South slavonic languages (Bulgarian, West slavonic languages (Polish, and East slavonic languages (Russian. Within the same framework the next parts of the paper are constructed, supplying samples of using Past tenses and, finally, future tenses and modalities. The formal tools for description purposes are introduced stepwise, according to needs caused be the described reality. There are mainly Petri nets, equipped additionally with inscriptions or labeling in order to keep proper assignations of description units to described objects.

Modeling Control Situations in Power System Operations

DEFF Research Database (Denmark)

Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

2010-01-01

for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system......Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...

Effectively working with challenging clients who receive hunger service assistance: Case examples and eight recommended guidelines

Directory of Open Access Journals (Sweden)

Sharon E. Moore

2006-12-01

Full Text Available Those who provide services for people who experience food insecurity come into contact with people who do not always present themselves courteously and favorably. Using case examples from the food bank industry, the authors of this paper will: (1 discuss why people sometimes behave discourteously when seeking assistance from human services professionals; (2 give case examples of how social workers could properly respond to these situations and, (3 give recommendations for effectively working with this client population.

Dynamics of Situation Definition

Science.gov (United States)

Park, Dongseop; Moro, Yuji

2006-01-01

Situation definition is the process and product of actors' interpretive activities toward a given situation. By reviewing a number of psychological studies conducted in experimental settings, we found that the studies have only explicated a part of the situation definition process and have neglected its dynamic aspects. We need to focus on the…

Cardiac C-arm computed tomography using a 3D + time ROI reconstruction method with spatial and temporal regularization

Energy Technology Data Exchange (ETDEWEB)

Mory, Cyril, E-mail: cyril.mory@philips.com [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Lyon 1, F-69621 Villeurbanne Cedex (France); Philips Research Medisys, 33 rue de Verdun, 92156 Suresnes (France); Auvray, Vincent; Zhang, Bo [Philips Research Medisys, 33 rue de Verdun, 92156 Suresnes (France); Grass, Michael; Schäfer, Dirk [Philips Research, Röntgenstrasse 24–26, D-22335 Hamburg (Germany); Chen, S. James; Carroll, John D. [Department of Medicine, Division of Cardiology, University of Colorado Denver, 12605 East 16th Avenue, Aurora, Colorado 80045 (United States); Rit, Simon [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Lyon 1 (France); Centre Léon Bérard, 28 rue Laënnec, F-69373 Lyon (France); Peyrin, Françoise [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Lyon 1, F-69621 Villeurbanne Cedex (France); X-ray Imaging Group, European Synchrotron, Radiation Facility, BP 220, F-38043 Grenoble Cedex (France); Douek, Philippe; Boussel, Loïc [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Lyon 1 (France); Hospices Civils de Lyon, 28 Avenue du Doyen Jean Lépine, 69500 Bron (France)

2014-02-15

Purpose: Reconstruction of the beating heart in 3D + time in the catheter laboratory using only the available C-arm system would improve diagnosis, guidance, device sizing, and outcome control for intracardiac interventions, e.g., electrophysiology, valvular disease treatment, structural or congenital heart disease. To obtain such a reconstruction, the patient's electrocardiogram (ECG) must be recorded during the acquisition and used in the reconstruction. In this paper, the authors present a 4D reconstruction method aiming to reconstruct the heart from a single sweep 10 s acquisition. Methods: The authors introduce the 4D RecOnstructiOn using Spatial and TEmporal Regularization (short 4D ROOSTER) method, which reconstructs all cardiac phases at once, as a 3D + time volume. The algorithm alternates between a reconstruction step based on conjugate gradient and four regularization steps: enforcing positivity, averaging along time outside a motion mask that contains the heart and vessels, 3D spatial total variation minimization, and 1D temporal total variation minimization. Results: 4D ROOSTER recovers the different temporal representations of a moving Shepp and Logan phantom, and outperforms both ECG-gated simultaneous algebraic reconstruction technique and prior image constrained compressed sensing on a clinical case. It generates 3D + time reconstructions with sharp edges which can be used, for example, to estimate the patient's left ventricular ejection fraction. Conclusions: 4D ROOSTER can be applied for human cardiac C-arm CT, and potentially in other dynamic tomography areas. It can easily be adapted to other problems as regularization is decoupled from projection and back projection.

Cardiac C-arm computed tomography using a 3D + time ROI reconstruction method with spatial and temporal regularization

International Nuclear Information System (INIS)

Mory, Cyril; Auvray, Vincent; Zhang, Bo; Grass, Michael; Schäfer, Dirk; Chen, S. James; Carroll, John D.; Rit, Simon; Peyrin, Françoise; Douek, Philippe; Boussel, Loïc

2014-01-01

Purpose: Reconstruction of the beating heart in 3D + time in the catheter laboratory using only the available C-arm system would improve diagnosis, guidance, device sizing, and outcome control for intracardiac interventions, e.g., electrophysiology, valvular disease treatment, structural or congenital heart disease. To obtain such a reconstruction, the patient's electrocardiogram (ECG) must be recorded during the acquisition and used in the reconstruction. In this paper, the authors present a 4D reconstruction method aiming to reconstruct the heart from a single sweep 10 s acquisition. Methods: The authors introduce the 4D RecOnstructiOn using Spatial and TEmporal Regularization (short 4D ROOSTER) method, which reconstructs all cardiac phases at once, as a 3D + time volume. The algorithm alternates between a reconstruction step based on conjugate gradient and four regularization steps: enforcing positivity, averaging along time outside a motion mask that contains the heart and vessels, 3D spatial total variation minimization, and 1D temporal total variation minimization. Results: 4D ROOSTER recovers the different temporal representations of a moving Shepp and Logan phantom, and outperforms both ECG-gated simultaneous algebraic reconstruction technique and prior image constrained compressed sensing on a clinical case. It generates 3D + time reconstructions with sharp edges which can be used, for example, to estimate the patient's left ventricular ejection fraction. Conclusions: 4D ROOSTER can be applied for human cardiac C-arm CT, and potentially in other dynamic tomography areas. It can easily be adapted to other problems as regularization is decoupled from projection and back projection

PET scanning in plastic and reconstructive surgery

International Nuclear Information System (INIS)

Eirini, L.; Emmanouil, L.; Othonas, P.; Hans-Guenther, M.; Nikolaos, P.A.

2012-01-01

In this report we highlight the use of position emission tomography (PET) scan in plastic and reconstructive surgery. PET scanning is a very important tool in plastic surgery oncology (melanoma, soft-tissue sarcomas and bone sarcomas, head and neck cancer, peripheral nerve sheath tumors of the extremities and breast cancer after breast esthetic surgery), as diagnosis, staging, treatment planning and follow-up of cancer patients is based on imaging. PET scanning seems also to be useful as a flap monitoring system as well as an infection's imaging tool, for example in the management of diabetic foot ulcer. PET also contributes to the understanding of pathophysiology of keloids which remain a therapeutic challenge. (author)

Contribution to the tracking and the 3D reconstruction of scenes composed of torus from image sequences a acquired by a moving camera; Contribution au suivi et a la reconstruction de scenes constituees d`objet toriques a partir de sequences d`images acquises par une camera mobile

Energy Technology Data Exchange (ETDEWEB)

Naudet, S

1997-01-31

The three-dimensional perception of the environment is often necessary for a robot to correctly perform its tasks. One solution, based on the dynamic vision, consists in analysing time-varying monocular images to estimate the spatial geometry of the scene. This thesis deals with the reconstruction of torus by dynamic vision. Though this object class is restrictive, it enables to tackle the problem of reconstruction of bent pipes usually encountered in industrial environments. The proposed method is based on the evolution of apparent contours of objects in the sequence. Using the expression of torus limb boundaries, it is possible to recursively estimate the object three-dimensional parameters by minimising the error between the predicted projected contours and the image contours. This process, which is performed by a Kalman filter, does not need a precise knowledge of the camera displacement or any matching of the tow limbs belonging to the same object. To complete this work, temporal tracking of objects which deals with occlusion situations is proposed. The approach consists in modeling and interpreting the apparent motion of objects in the successive images. The motion interpretation, based on a simplified representation of the scene, allows to recover pertinent three-dimensional information which is used to manage occlusion situations. Experiments, on synthetic and real images, proves he validity of the tracking and the reconstruction processes. (author) 127 refs.

Natural radioactivity and radiation situation in Mangystau Oblast and Western Kazakhstan

International Nuclear Information System (INIS)

Kadyrzhanov, K. K.; Kuterbekov, K. A.; Lukashenko, S. N.; Glushchenko, V. N.; Kijatkina, N. G.; Morenko, V. S.; Poleshko, A. N.

2004-01-01

When performing radio-ecological investigations and developing measures for lowering radiation risks for inhabited localities and territories subjected to impact of radiation-hazardous objects (RHO) one should pay special attention to the cases when several RHO's of different type contribute simultaneously into radiation situation in a region. A prominent example is the Aktau city in Mangystau oblast of Western Kazakhstan; radiation situation there has been formed under such factors as presence of Mangyshlak Atomic Energy Combine with BN-350 reactor facilities, sites of underground nuclear explosions at Plato Ustyurt, uranium extracting and processing facilities and a bunch of operating there oil extracting companies. Previous investigations showed that situation in the city and its vicinity is quite complex and requires vast corrective measures to be immediately introduced. At the same time, separate narrow-scale programs related to improvement of radio-ecological situation in the region funded from different sources are uncoordinated and are not very effective for they have been developed without taking into account all the possible sources and mechanisms of radioactive contamination of the environment. In order to improve effectiveness of the measures aimed at lowering radiation risks it is necessary to perform preliminary investigations and estimate contributions from each RHO in the region. Institute of Nuclear Physics of National Nuclear Center (INP NNC RK) has been actively involved in a set of research and environment-preventing measures in Mangystau oblast for many years. Among the most noticeable projects on investigation of radiation situation at the territory of Mangystau oblast where INP took part or leaded are the following: assessment of radiation situation in places of underground nuclear explosions at Plato Ustyurt; over all investigation of sanitary-protection zone and monitoring zone of BN-350 reactor facilities; over-all investigation of

Monte-Carlo simulations and image reconstruction for novel imaging scenarios in emission tomography

International Nuclear Information System (INIS)

Gillam, John E.; Rafecas, Magdalena

2016-01-01

Emission imaging incorporates both the development of dedicated devices for data acquisition as well as algorithms for recovering images from that data. Emission tomography is an indirect approach to imaging. The effect of device modification on the final image can be understood through both the way in which data are gathered, using simulation, and the way in which the image is formed from that data, or image reconstruction. When developing novel devices, systems and imaging tasks, accurate simulation and image reconstruction allow performance to be estimated, and in some cases optimized, using computational methods before or during the process of physical construction. However, there are a vast range of approaches, algorithms and pre-existing computational tools that can be exploited and the choices made will affect the accuracy of the in silico results and quality of the reconstructed images. On the one hand, should important physical effects be neglected in either the simulation or reconstruction steps, specific enhancements provided by novel devices may not be represented in the results. On the other hand, over-modeling of device characteristics in either step leads to large computational overheads that can confound timely results. Here, a range of simulation methodologies and toolkits are discussed, as well as reconstruction algorithms that may be employed in emission imaging. The relative advantages and disadvantages of a range of options are highlighted using specific examples from current research scenarios.

Monte-Carlo simulations and image reconstruction for novel imaging scenarios in emission tomography

Energy Technology Data Exchange (ETDEWEB)

Gillam, John E. [The University of Sydney, Faculty of Health Sciences and The Brain and Mind Centre, Camperdown (Australia); Rafecas, Magdalena, E-mail: rafecas@imt.uni-luebeck.de [University of Lubeck, Institute of Medical Engineering, Ratzeburger Allee 160, 23538 Lübeck (Germany)

2016-02-11

Emission imaging incorporates both the development of dedicated devices for data acquisition as well as algorithms for recovering images from that data. Emission tomography is an indirect approach to imaging. The effect of device modification on the final image can be understood through both the way in which data are gathered, using simulation, and the way in which the image is formed from that data, or image reconstruction. When developing novel devices, systems and imaging tasks, accurate simulation and image reconstruction allow performance to be estimated, and in some cases optimized, using computational methods before or during the process of physical construction. However, there are a vast range of approaches, algorithms and pre-existing computational tools that can be exploited and the choices made will affect the accuracy of the in silico results and quality of the reconstructed images. On the one hand, should important physical effects be neglected in either the simulation or reconstruction steps, specific enhancements provided by novel devices may not be represented in the results. On the other hand, over-modeling of device characteristics in either step leads to large computational overheads that can confound timely results. Here, a range of simulation methodologies and toolkits are discussed, as well as reconstruction algorithms that may be employed in emission imaging. The relative advantages and disadvantages of a range of options are highlighted using specific examples from current research scenarios.

Simple example of track finding by Fourier transform and possibilities for vector or optical processors

International Nuclear Information System (INIS)

Underwood, D.

1986-01-01

Simple examples of finding tracks by Fourier transform with filter or correlation function are presented. Possibilities for using this method in more complicated real situations and the processing times which might be achieved are discussed. The method imitates the simplest examples in the literature on optical pattern recognition and optical processing. The possible benefits of the method are in speed of processing in the optical Fourier transform wherein an entire picture is processed simultaneously. The speed of a computer vector processor may be competitive with present electro-optical devices. 2 refs., 6 figs

Direct image reconstruction with limited angle projection data for computerized tomography

International Nuclear Information System (INIS)

Inouye, T.

1980-01-01

Discussions are made on the minimum angle range for projection data necessary to reconstruct the complete CT image. As is easily shown from the image reconstruction theorem, the lack of projection angle provides no data for the Fourier transformed function of the object on the corresponding angular directions, where the projections are missing. In a normal situation, the Fourier transformed function of an object image holds an analytic characteristic with respect to two-dimensional orthogonal parameters. This characteristic enables uniquely prolonging the function outside the obtained region employing a sort of analytic continuation with respect to both parameters. In the method reported here, an object pattern, which is confined within a finite range, is shifted to a specified region to have complete orthogonal function expansions without changing the projection angle directions. These orthogonal functions are analytically extended to the missing projection angle range and the whole function is determined. This method does not include any estimation process, whose effectiveness is often seriously jeopardized by the presence of a slight fluctuation component. Computer simulations were carried out to demonstrate the effectiveness of the method

Evaluation Aspects of Building Structures Reconstructed After a Failure or Catastrophe

Science.gov (United States)

Krentowski, Janusz R.; Knyziak, Piotr

2017-10-01

The article presents the characteristics of several steel structures, among others modernized industrial dye house, school sports hall, truck repair workshop, that have been rebuilt after a disaster or a catastrophe. The structures were analyzed in detail, and the evaluation and reconstruction processes were described. The emergencies that occurred during exploitation of the buildings were the result of multiple mistakes: incorrectly defined intervals between inspections, errors during periodic inspections, incorrect repair work recommendations. The concepts of reinforcement work implemented by the authors, enabling the long-term future failure-free operation of the objects, were presented. Recommendations for monitoring of the facilities, applied after reinforcement or reconstruction, have been formulated. The methodology for the implementation of specialized investigations, such as geodetic, optical, geological, chemical strength tests, both destructive and non-destructive, has been defined. The need to determine the limit values of deformations, deflections, damage or other faults of structural elements and the entire rebuilt facilities, as well as defining conditions for objects’ withdrawal from operation in subsequent exceptional situations was indicated.

Partial fourier and parallel MR image reconstruction with integrated gradient nonlinearity correction.

Science.gov (United States)

Tao, Shengzhen; Trzasko, Joshua D; Shu, Yunhong; Weavers, Paul T; Huston, John; Gray, Erin M; Bernstein, Matt A

2016-06-01

To describe how integrated gradient nonlinearity (GNL) correction can be used within noniterative partial Fourier (homodyne) and parallel (SENSE and GRAPPA) MR image reconstruction strategies, and demonstrate that performing GNL correction during, rather than after, these routines mitigates the image blurring and resolution loss caused by postreconstruction image domain based GNL correction. Starting from partial Fourier and parallel magnetic resonance imaging signal models that explicitly account for GNL, noniterative image reconstruction strategies for each accelerated acquisition technique are derived under the same core mathematical assumptions as their standard counterparts. A series of phantom and in vivo experiments on retrospectively undersampled data were performed to investigate the spatial resolution benefit of integrated GNL correction over conventional postreconstruction correction. Phantom and in vivo results demonstrate that the integrated GNL correction reduces the image blurring introduced by the conventional GNL correction, while still correcting GNL-induced coarse-scale geometrical distortion. Images generated from undersampled data using the proposed integrated GNL strategies offer superior depiction of fine image detail, for example, phantom resolution inserts and anatomical tissue boundaries. Noniterative partial Fourier and parallel imaging reconstruction methods with integrated GNL correction reduce the resolution loss that occurs during conventional postreconstruction GNL correction while preserving the computational efficiency of standard reconstruction techniques. Magn Reson Med 75:2534-2544, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

[Reconstructive methods after Fournier gangrene].

Science.gov (United States)

Wallner, C; Behr, B; Ring, A; Mikhail, B D; Lehnhardt, M; Daigeler, A

2016-04-01

Fournier's gangrene is a variant of the necrotizing fasciitis restricted to the perineal and genital region. It presents as an acute life-threatening disease and demands rapid surgical debridement, resulting in large soft tissue defects. Various reconstructive methods have to be applied to reconstitute functionality and aesthetics. The objective of this work is to identify different reconstructive methods in the literature and compare them to our current concepts for reconstructing defects caused by Fournier gangrene. Analysis of the current literature and our reconstructive methods on Fournier gangrene. The Fournier gangrene is an emergency requiring rapid, calculated antibiotic treatment and radical surgical debridement. After the acute phase of the disease, appropriate reconstructive methods are indicated. The planning of the reconstruction of the defect depends on many factors, especially functional and aesthetic demands. Scrotal reconstruction requires a higher aesthetic and functional reconstructive degree than perineal cutaneous wounds. In general, thorough wound hygiene, proper pre-operative planning, and careful consideration of the patient's demands are essential for successful reconstruction. In the literature, various methods for reconstruction after Fournier gangrene are described. Reconstruction with a flap is required for a good functional result in complex regions as the scrotum and penis, while cutaneous wounds can be managed through skin grafting. Patient compliance and tissue demand are crucial factors in the decision-making process.

Enhanced Morbidity of Pectoralis Major Myocutaneous Flap Used for Salvage after Previously Failed Oncological Treatment and Unsuccessful Reconstructive Head and Neck Surgery

Directory of Open Access Journals (Sweden)

Christiana Maria Ribeiro Salles Vanni

2012-01-01

Full Text Available Introduction. The reconstruction of complex cervicofacial defects arising from surgical treatment for cancer is a real challenge for head and neck surgeons, especially in salvage reconstruction surgery and/or failed previous reconstruction. The pectoralis major myocutaneous flap (PMMF has been widely used in these specific situations due to its reliability and low rate of failure or complications. Objectives. Identify factors that determine complications and influence the final outcome of the reconstructions with PMMF in salvage cancer surgery or in salvage reconstruction. Methods. A cross-sectional study design was used to evaluate a sample including 17 surgical patients treated over a period of ten years that met the inclusion criteria. Results. Reconstruction was successful in 13 cases (76.5%, with two cases of partial flap loss and no case of total loss. Complications occurred in 13 cases (76.5% and were specifically related to the flap in nine instances (52.9%. An association was identified between the development of major complications and reconstruction of the hypopharynx (=0.013 as well as in patients submitted to surgery in association with radiation therapy as a previous cancer treatment (=0.002. The former condition is also associated with major reconstruction failure (=0.018. An even lower incidence of major complications was noted in patients under the age of 53 (=0.044. Conclusion. Older patients, with hypopharyngeal defects and submitted to previous surgery plus radiation therapy, presented a higher risk of complications and reconstruction failure with PMMF.

Shaping the breast in secondary microsurgical breast reconstruction: single- vs. two-esthetic unit reconstruction.

Science.gov (United States)

Gravvanis, Andreas; Smith, Roger W

2010-10-01

The esthetic outcome is dictated essentially not only by the position, size, and shape of the reconstructed breast, but also by the extra scaring involved. In the present study, we conducted a visual analog scale survey to compare the esthetic outcome in delayed autologous breast reconstruction following two different abdominal flaps inset. Twenty-five patients had their reconstruction using the Single-esthetic Unit principle and were compared with 25 patients that their breast was reconstructed using the Two-Esthetic Unit principle. Photographic images were formulated to a PowerPoint presentation and cosmetic outcomes were assessed from 30 physicians, by means of a Questionnaire and a visual analog scale. Our data showed that the single-esthetic unit breast reconstruction presents significant advantages over the traditional two-esthetic units, due to inconspicuous flap reconstruction, better position of the inframammary fold, and more natural transition from native and reconstructed tissues. Moreover, patient self-evaluation of esthetic outcome and quality of life showed that single-esthetic unit reconstruction is associated with higher patient satisfaction, therefore should be considered the method of choice. © 2010 Wiley-Liss, Inc.

Our Clinical Experience in Lower Eyelid Reconstruction and Comparison of Reconstruction Techniques.

Directory of Open Access Journals (Sweden)

Erol Kesiktas

2011-03-01

Full Text Available Lower eyelid reconstruction after tumor resection or trauma is extremely important in order to obtain the protection of the globe and it requires extra care. The aim of this study is to evaluate the techniques that we use in lower eyelid reconstruction. Between the years of 1999-2009, a total of 23 patients who had lower eyelid defects due to tumor resection (21 patients or trauma (2 patients were reconstructed by the use of various flaps. Eleven of the patients were women and twelve of them were men. Average age was 60.7. For the reconstruction 13 Mustarde flap, 9 bipedicled Tripier flap, 1 Tenzel flap and 1 bipedicled infraorbital flaps were used. Average postoperative follow up interval was 35 months. (18-47 months. Flap necrosis, function loss in the lower lid were not experienced in any of the patients. Cosmetically satisfactory results were obtained. In lower eyelid reconstruction, the size of the defect and the amount of skin around must be carefully evaluated and should be considered while planning the reconstruction. [Cukurova Med J 2011; 36(1: 15-23

3D visibility analysis as a tool to validate ancient theatre reconstructions: the case of the large Roman theatre of Gortyn

Directory of Open Access Journals (Sweden)

Maria Cristina Manzetti

2016-11-01

Full Text Available With the diffusion of Virtual Archaeology, many projects in the field of Cultural Heritage attempt to virtually reconstruct historical buildings of different types. Unfortunately, some of these 3D reconstructions still have as principal aim to impress the external users, while the correct interpretation of the buildings modeled is much more important in the domain of archaeological research. Still more critical is the situation when we have to encounter a reconstruction of a monument which is not visible anymore, or which consists only of few architectural remains. The main purpose of this paper is to introduce an innovative methodology to verify hypothetical scenarios of 3D architectural reconstructions, specifically for ancient theatres. In very recent time 3D visibility analysis applied to archaeological context using ArcGIS has been developed, in particular about social-urban studies. In this paper, visibility analysis in 3D contexts is used as an additional instrument to correctly reconstruct architectural elements of the large Roman theatre of Gortyn, in Crete. The results indicate that the level of visibility of the stage, and consequently of the presumed actors, from some of the more representative sectors of the cavea, is of crucial importance for leading to a right reconstruction model of the theatre.

Maximum entropy reconstructions for crystallographic imaging; Cristallographie et reconstruction d`images par maximum d`entropie

Energy Technology Data Exchange (ETDEWEB)

Papoular, R

1997-07-01

The Fourier Transform is of central importance to Crystallography since it allows the visualization in real space of tridimensional scattering densities pertaining to physical systems from diffraction data (powder or single-crystal diffraction, using x-rays, neutrons, electrons or else). In turn, this visualization makes it possible to model and parametrize these systems, the crystal structures of which are eventually refined by Least-Squares techniques (e.g., the Rietveld method in the case of Powder Diffraction). The Maximum Entropy Method (sometimes called MEM or MaxEnt) is a general imaging technique, related to solving ill-conditioned inverse problems. It is ideally suited for tackling undetermined systems of linear questions (for which the number of variables is much larger than the number of equations). It is already being applied successfully in Astronomy, Radioastronomy and Medical Imaging. The advantages of using MAXIMUM Entropy over conventional Fourier and `difference Fourier` syntheses stem from the following facts: MaxEnt takes the experimental error bars into account; MaxEnt incorporate Prior Knowledge (e.g., the positivity of the scattering density in some instances); MaxEnt allows density reconstructions from incompletely phased data, as well as from overlapping Bragg reflections; MaxEnt substantially reduces truncation errors to which conventional experimental Fourier reconstructions are usually prone. The principles of Maximum Entropy imaging as applied to Crystallography are first presented. The method is then illustrated by a detailed example specific to Neutron Diffraction: the search for proton in solids. (author). 17 refs.

Reconstruction and restoration of historical buildings of transport infrastructure

Science.gov (United States)

Kareeva, Daria; Glazkova, Valeriya

2017-10-01

The aim of this article is to identify the main problems in the restoration of the historical objects. For this reason, it is rationally to collect and analyze the existing world experience of restoration. The information which was put together showed that there are some problems which are common and can be solved. In addition, the protection of the Monuments of Culture and Architecture Comittees always makes the restoration and reconstruction of the historical buildings complicated. By the examples of Germany, Italy and Russia it is shown that there are problems in organization, economy, planning and control. Engineers should think of and justify the methodology of organizing and monitoring of the restoration of the historical buildings. As a second solution, it will be possible to minimize time and financial costs through a favorable financial and legal background for investors and through the creation of a system of restoration work organizing. And for a faster process of restoration the imitation programs should be optimized for research and selection of the reconstruction technological and economic methods.

Virtual planning of complex head and neck reconstruction results in satisfactory match between real outcomes and virtual models.

Science.gov (United States)

Hanken, Henning; Schablowsky, Clemens; Smeets, Ralf; Heiland, Max; Sehner, Susanne; Riecke, Björn; Nourwali, Ibrahim; Vorwig, Oliver; Gröbe, Alexander; Al-Dam, Ahmed

2015-04-01

The reconstruction of large facial bony defects using microvascular transplants requires extensive surgery to achieve full rehabilitation of form and function. The purpose of this study is to measure the agreement between virtual plans and the actual results of maxillofacial reconstruction. This retrospective cohort study included 30 subjects receiving maxillofacial reconstruction with a preoperative virtual planning. Parameters including defect size, position, angle and volume of the transplanted segments were compared between the virtual plan and the real outcome using paired t test. A total of 63 bone segments were transplanted. The mean differences between the virtual planning and the postoperative situation were for the defect sizes 1.17 mm (95 % confidence interval (CI) (-.21 to 2.56 mm); p = 0.094), for the resection planes 1.69 mm (95 % CI (1.26-2.11); p = 0.033) and 10.16° (95 % CI (8.36°-11.96°); p satisfactory postoperative results are the basis for an optimal functional and aesthetic reconstruction in a single surgical procedure. The technique should be further investigated in larger study populations and should be further improved.

Reconstruction strategy for echo planar spectroscopy and its application to partially undersampled imaging

DEFF Research Database (Denmark)

Hanson, L G; Schaumburg, K; Paulson, O B

2000-01-01

The most commonly encountered form of echo planar spectroscopy involves oscillating gradients in one spatial dimension during readout. Data are consequently not sampled on a Cartesian grid. A fast gridding algorithm applicable to this particular situation is presented. The method is optimal, i.......e., it performs as well as the full discrete Fourier transform for band limited signals while allowing for use of the fast Fourier transform. The method is demonstrated for reconstruction of data that are partially undersampled in the time domain. The advantages of undersampling are lower hardware requirements...

THE ROLE OF DOMINANT MOTIVATION IN THE SUCCESS (FAILURE OF EDUCATIONAL ACTIVITY AND ITS RELATIONSHIP WITH PERSONAL AND SITUATIONAL ANXIETY

Directory of Open Access Journals (Sweden)

Larisa Evgenievna Deryagina

2015-12-01

Full Text Available This article describes the structure of dominant motivation educational activity in student groups with good (I gr. and bad achievers (II gr., for example, learning a foreign language. Obtained results have revealed the fundamental differences of motivational profiles in two researched groups: there has been an active, adequate situation, aimed to successful achieving of motivational strategy in I group; and a passive, aimed to avoid failure, conflicting and therefore ineffective strategy in II group. There were analyzed levels of personal and situational anxiety among students with different structures of dominant motivation in a situation of test control and in normal conditions. It was revealed that subjects with leading motivation for success have demonstrated moderate levels of both personal and situational anxiety, which have not changed in testing situation practically. The students with motivation of avoiding failure have had a higher level of personal anxiety, especially. In situation of testing control the levels of personal and situational anxiety have increased significantly, which reduced the productivity of educational activity.

Breast Reconstruction Following Cancer Treatment.

Science.gov (United States)

Gerber, Bernd; Marx, Mario; Untch, Michael; Faridi, Andree

2015-08-31

About 8000 breast reconstructions after mastectomy are per - formed in Germany each year. It has become more difficult to advise patients because of the wide variety of heterologous and autologous techniques that are now available and because of changes in the recommendations about radiotherapy. This article is based on a review of pertinent articles (2005-2014) that were retrieved by a selective search employing the search terms "mastectomy" and "breast reconstruction." The goal of reconstruction is to achieve an oncologically safe and aestically satisfactory result for the patient over the long term. Heterologous, i.e., implant-based, breast reconstruction (IBR) and autologous breast reconstruction (ABR) are complementary techniques. Immediate reconstruction preserves the skin of the breast and its natural form and prevents the psychological trauma associated with mastectomy. If post-mastectomy radiotherapy (PMRT) is not indicated, implant-based reconstruction with or without a net/acellular dermal matrix (ADM) is a common option. Complications such as seroma formation, infection, and explantation are significantly more common when an ADM is used (15.3% vs. 5.4% ). If PMRT is performed, then the complication rate of implant-based breast reconstruction is 1 to 48% ; in particular, Baker grade III/IV capsular fibrosis occurs in 7 to 22% of patients, and the prosthesis must be explanted in 9 to 41% . Primary or, preferably, secondary autologous reconstruction is an alternative. The results of ABR are more stable over the long term, but the operation is markedly more complex. Autologous breast reconstruction after PMRT does not increase the risk of serious complications (20.5% vs. 17.9% without radiotherapy). No randomized controlled trials have yet been conducted to compare the reconstructive techniques with each other. If radiotherapy will not be performed, immediate reconstruction with an implant is recommended. On the other hand, if post-mastectomy radiotherapy

Atmospheric inverse modeling via sparse reconstruction

Science.gov (United States)

Hase, Nils; Miller, Scot M.; Maaß, Peter; Notholt, Justus; Palm, Mathias; Warneke, Thorsten

2017-10-01

Many applications in atmospheric science involve ill-posed inverse problems. A crucial component of many inverse problems is the proper formulation of a priori knowledge about the unknown parameters. In most cases, this knowledge is expressed as a Gaussian prior. This formulation often performs well at capturing smoothed, large-scale processes but is often ill equipped to capture localized structures like large point sources or localized hot spots. Over the last decade, scientists from a diverse array of applied mathematics and engineering fields have developed sparse reconstruction techniques to identify localized structures. In this study, we present a new regularization approach for ill-posed inverse problems in atmospheric science. It is based on Tikhonov regularization with sparsity constraint and allows bounds on the parameters. We enforce sparsity using a dictionary representation system. We analyze its performance in an atmospheric inverse modeling scenario by estimating anthropogenic US methane (CH4) emissions from simulated atmospheric measurements. Different measures indicate that our sparse reconstruction approach is better able to capture large point sources or localized hot spots than other methods commonly used in atmospheric inversions. It captures the overall signal equally well but adds details on the grid scale. This feature can be of value for any inverse problem with point or spatially discrete sources. We show an example for source estimation of synthetic methane emissions from the Barnett shale formation.

The nanotech R&D situation in Japan and ethics of nanotechnology.

Science.gov (United States)

Kato, Yutaka

2011-01-01

The aim of this paper is to introduce some characteristics of the historical as well as current situation of nanotech research and development in Japan in particular including regulations, and to discuss how ethical issues of nanotechnology should be addressed or how the ethics of nanotechnology should be constructed to fit the situation. The first part will center around the strength and weakness of Japan's nanotech R&D (research and development) and new circumstances which nanotechnology has prompted in Japan and alongside which nanotechnology has arrived (especially interdisciplinarity). The following prescriptive argument will, based on the descriptive account, question how to address ethical issues of nanotechnology, taking into consideration the nature of nanotech R&D, namely continuity, uniqueness, international dimension and political intervention, citing the example of the pharmaceutical industry. I will argue that international cooperation in the form of mutual reference to, replication of and the integration of guidelines and regulations, can enhance cost-effectiveness to ensure the comprehensiveness of regulatory measures.

Information-Dispersion-Entropy-Based Blind Recognition of Binary BCH Codes in Soft Decision Situations

Directory of Open Access Journals (Sweden)

Yimeng Zhang

2013-05-01

Full Text Available A method of blind recognition of the coding parameters for binary Bose-Chaudhuri-Hocquenghem (BCH codes is proposed in this paper. We consider an intelligent communication receiver which can blindly recognize the coding parameters of the received data stream. The only knowledge is that the stream is encoded using binary BCH codes, while the coding parameters are unknown. The problem can be addressed on the context of the non-cooperative communications or adaptive coding and modulations (ACM for cognitive radio networks. The recognition processing includes two major procedures: code length estimation and generator polynomial reconstruction. A hard decision method has been proposed in a previous literature. In this paper we propose the recognition approach in soft decision situations with Binary-Phase-Shift-Key modulations and Additive-White-Gaussian-Noise (AWGN channels. The code length is estimated by maximizing the root information dispersion entropy function. And then we search for the code roots to reconstruct the primitive and generator polynomials. By utilizing the soft output of the channel, the recognition performance is improved and the simulations show the efficiency of the proposed algorithm.

Permutationally invariant state reconstruction

DEFF Research Database (Denmark)

Moroder, Tobias; Hyllus, Philipp; Tóth, Géza

2012-01-01

Feasible tomography schemes for large particle numbers must possess, besides an appropriate data acquisition protocol, an efficient way to reconstruct the density operator from the observed finite data set. Since state reconstruction typically requires the solution of a nonlinear large-scale opti...... optimization, which has clear advantages regarding speed, control and accuracy in comparison to commonly employed numerical routines. First prototype implementations easily allow reconstruction of a state of 20 qubits in a few minutes on a standard computer.......-scale optimization problem, this is a major challenge in the design of scalable tomography schemes. Here we present an efficient state reconstruction scheme for permutationally invariant quantum state tomography. It works for all common state-of-the-art reconstruction principles, including, in particular, maximum...

[Psychosomatic symptoms in somatic diseases - open-angle glaucoma for example].

Science.gov (United States)

Emmerich, G M

2010-08-01

Psychological aspects exist in somatic diseases like tumours and even fractures, not only in the beginning but also in the management of disease. Somatic diseases give rise to signs of a special constellation of life and management of these diseases is important for the psychological constellation of the individual. Studies on open-angle glaucoma have shown that many patients suffering from this disease are anxious, hypochondric, perfectionist and emotional instable. Chronic diseases are demanding processes of flexibility and defense, and define how the individual can deal with the diseases and what place in life the disease will occupy in the future. In the holistic view of medicine even psychological conflicts should be treated. In many situations, these conflicts are not consciously experienced by the individual. Therapeutically, 2 different tools can be used: symbolic stories can bring forces to manage the conflict and to solve the conflict (2 examples in the text). The method of positive psychotherapy describes the reasons for psychosomatic diseases in three parts: psychosomatic in the traditional understanding, in further and comprehensive understanding. Especially the psychosomatic effects in comprehensive understanding are embedded in the individual's sociocultural environment and provide tips on reasons for the diseases in those parts of life. The "positive balance model" gives an example of life-management and conflict-therapy. In ophthalmology, fear is often more important for the patient than pain. To avoid this, the patients develop techniques to deny, to cover or to suppress the fear. In the article questions are presented like those the ophthalmologist should be able to ask patients in the office concerning open-angle glaucoma. Tips for the therapy and management for neurotic stress are offered and some special anamnestic questions for the ophthalmologist are presented. Unsolved conflicts and denied desires as neurotic symptoms can be focused in

A reconstructive ethic in the face of globalisation

Directory of Open Access Journals (Sweden)

Ingrid Adriana Alvarez Osses

2015-12-01

Full Text Available This investigation seeks to expound a critical ethic of hegemonic globalisation. We reflect on the common good ethics of Franz Hinkelammert, the contribution made by the intercultural dialogue of Raúl Fornet-Betancourt, the Ethics of Liberation of Enrique Dussel, and the situated, contextual thinking of Rodolfo Kusch. At the same time, the text reflects on the dilemmas of  globalisation, especially with respect to polarisation and mutual incomprehension. We attempt to descry prospects for a situated critical ethic in the face of the cultural and economic order which governs the world. It is also important to consider the relevance of other assumptions which seek  to change the logic of negation and non-recognition that have led to the Self and Totality. As part of this prospect, we propose a reconstructive ethic for the rehabilitation of a world order which has no ears for the voice of the victims of the profit imperative and a functional ethic based on utilitarism. This reveals a void in supportive behavior which demands a more responsible attitude towards those sectors which have always been passed over. Thus we propose  an ethic which will strengthen dialogue in pursuit of other possibilities for the human race.

An Interactive Visualization of the Past using a Situated Simulation Approach

DEFF Research Database (Denmark)

Madsen, Jacob Boesen; Madsen, Claus B.

2013-01-01

This paper describes aspects of the development of an interactive installation for visualizing a 3D reconstruction of a historical church chapel in Kolding, Denmark. We focus on three aspects inherent to a mobile Augmented Reality development con- text; 1) A procedure for combating gyroscope drift...... on handheld devices, 2) achieving realistic lighting computation on a mobile platform at interactive frame-rates and 3) an approach to re- location within this applications situated location without position tracking. We present a solution to each of these three aspects. The development is targeted a specific...... application, but the presented solutions should be relevant to researchers and developers facing similar issues in other contexts. We furthermore present initial findings from everyday usage by visitors at the museum, and explore how these findings can be useful in connection with novel technology...

Fast implementations of reconstruction-based scatter compensation in fully 3D SPECT image reconstruction

International Nuclear Information System (INIS)

Kadrmas, Dan J.; Karimi, Seemeen S.; Frey, Eric C.; Tsui, Benjamin M.W.

1998-01-01

Accurate scatter compensation in SPECT can be performed by modelling the scatter response function during the reconstruction process. This method is called reconstruction-based scatter compensation (RBSC). It has been shown that RBSC has a number of advantages over other methods of compensating for scatter, but using RBSC for fully 3D compensation has resulted in prohibitively long reconstruction times. In this work we propose two new methods that can be used in conjunction with existing methods to achieve marked reductions in RBSC reconstruction times. The first method, coarse-grid scatter modelling, significantly accelerates the scatter model by exploiting the fact that scatter is dominated by low-frequency information. The second method, intermittent RBSC, further accelerates the reconstruction process by limiting the number of iterations during which scatter is modelled. The fast implementations were evaluated using a Monte Carlo simulated experiment of the 3D MCAT phantom with 99m Tc tracer, and also using experimentally acquired data with 201 Tl tracer. Results indicated that these fast methods can reconstruct, with fully 3D compensation, images very similar to those obtained using standard RBSC methods, and in reconstruction times that are an order of magnitude shorter. Using these methods, fully 3D iterative reconstruction with RBSC can be performed well within the realm of clinically realistic times (under 10 minutes for 64x64x24 image reconstruction). (author)

Update on orbital reconstruction.

Science.gov (United States)

Chen, Chien-Tzung; Chen, Yu-Ray

2010-08-01

Orbital trauma is common and frequently complicated by ocular injuries. The recent literature on orbital fracture is analyzed with emphasis on epidemiological data assessment, surgical timing, method of approach and reconstruction materials. Computed tomographic (CT) scan has become a routine evaluation tool for orbital trauma, and mobile CT can be applied intraoperatively if necessary. Concomitant serious ocular injury should be carefully evaluated preoperatively. Patients presenting with nonresolving oculocardiac reflex, 'white-eyed' blowout fracture, or diplopia with a positive forced duction test and CT evidence of orbital tissue entrapment require early surgical repair. Otherwise, enophthalmos can be corrected by late surgery with a similar outcome to early surgery. The use of an endoscope-assisted approach for orbital reconstruction continues to grow, offering an alternative method. Advances in alloplastic materials have improved surgical outcome and shortened operating time. In this review of modern orbital reconstruction, several controversial issues such as surgical indication, surgical timing, method of approach and choice of reconstruction material are discussed. Preoperative fine-cut CT image and thorough ophthalmologic examination are key elements to determine surgical indications. The choice of surgical approach and reconstruction materials much depends on the surgeon's experience and the reconstruction area. Prefabricated alloplastic implants together with image software and stereolithographic models are significant advances that help to more accurately reconstruct the traumatized orbit. The recent evolution of orbit reconstruction improves functional and aesthetic results and minimizes surgical complications.

Chronic instability of the anterior tibiofibular syndesmosis of the ankle. Arthroscopic findings and results of anatomical reconstruction

Directory of Open Access Journals (Sweden)

Swierstra Bart A

2011-09-01

Full Text Available Abstract Background The arthroscopic findings in patients with chronic anterior syndesmotic instability that need reconstructive surgery have never been described extensively. Methods In 12 patients the clinical suspicion of chronic instability of the syndesmosis was confirmed during arthroscopy of the ankle. All findings during the arthroscopy were scored. Anatomical reconstruction of the anterior tibiofibular syndesmosis was performed in all patients. The AOFAS score was assessed to evaluate the result of the reconstruction. At an average of 43 months after the reconstruction all patients were seen for follow-up. Results The syndesmosis being easily accessible for the 3 mm transverse end of probe which could be rotated around its longitudinal axis in all cases during arthroscopy of the ankle joint, confirmed the diagnosis. Cartilage damage was seen in 8 ankles, of which in 7 patients the damage was situated at the medial side of the ankle joint. The intraarticular part of anterior tibiofibular ligament was visibly damaged in 5 patients. Synovitis was seen in all but one ankle joint. After surgical reconstruction the AOFAS score improved from an average of 72 pre-operatively to 92 post-operatively. Conclusions To confirm the clinical suspicion, the final diagnosis of chronic instability of the anterior syndesmosis can be made during arthroscopy of the ankle. Cartilage damage to the medial side of the tibiotalar joint is often seen and might be the result of syndesmotic instability. Good results are achieved by anatomic reconstruction of the anterior syndesmosis, and all patients in this study would undergo the surgery again if necessary.

Mind Invasion: Situated Affectivity and the Corporate Life Hack.

Science.gov (United States)

Slaby, Jan

2016-01-01

In view of the philosophical problems that vex the debate on situated affectivity, it can seem wise to focus on simple cases. Accordingly, theorists often single out scenarios in which an individual employs a device in order to enhance their emotional experience, or to achieve new kinds of experience altogether, such as playing an instrument, going to the movies, or sporting a fancy handbag. I argue that this narrow focus on cases that fit a "user/resource model" tends to channel attention away from more complex and also more problematic instances of situated affectivity. Among these are scenarios in which a social domain draws individuals into certain modes of affective interaction, often by way of attunement and habituation to affective styles and interaction patterns that are normative in the domain in question. This can lead to a phenomenon that is not so much "mind extension" than "mind invasion": affectivity is dynamically framed and modulated from without, often contrary to the prior orientations of the individuals in question. As an example, I discuss affective patterns prevalent in today's corporate workplace. I claim that workplace affect sometimes contributes to what is effectively a "hack" of employees' subjectivity.

Opening up mental health service delivery to cultural diversity: current situation, development and examples from three northern European countries.

Science.gov (United States)

Bäärnhielm, Sofie; Jávo, Cecilie; Mösko, Mike-Oliver

2013-01-01

There are inequalities in health among migrants and local populations in Europe. Due to migration, Germany, Norway and Sweden have become ethnic culturally diverse nations. There are barriers to mental health care access for refugees, migrants and minorities, and problems with quality of culturally sensitive care in the three countries. This is despite tax-funded health care systems based on equity in service provision. There is a need to develop culturally sensitive mental health services that respond to the increasing diversity of the populations. In this chapter, we will take a closer look at cultural diversity in the countries in question, discuss challenges and give examples of current work to open up mental health services to cultural diversity. The German example will focus on the movement of Interkulturelle Öffnung (cross-cultural opening of the health care system) and work on creating national guidelines and quality standards. From Norway, the work of the National Centre for Mental Health for the indigenous Sámi population will be presented. The Swedish example will focus on the work carried out by the Transcultural Centre. The latter is a competence centre supporting development of culturally sensitive care as an integrated part of the regional health and mental health care system in Stockholm. Finally, the relevance of mental health care for a culturally diverse population, as a part of the larger social project of building tolerant multicultural societies, will be discussed. Copyright © 2013 S. Karger AG, Basel.

A discussion support model for a regional dairy-pasture system with an example from Reunion island

NARCIS (Netherlands)

Nidumolu, U.B.; Lubbers, M.T.M.H.; Alary, V.; Lecomte, P.; Keulen, van H.

2011-01-01

Reunion Island, situated in the Indian Ocean, presents a unique case study for modelling regional bio-economic parameters of the dairy industry. It is a good example of a closed system for several parameters of the model such as movement of animals, labour, consumption and available land. The

Upgrade to iterative image reconstruction (IR) in abdominal MDCT imaging: a clinical study for detailed parameter optimization beyond vendor recommendations using the adaptive statistical iterative reconstruction environment (ASIR).

Science.gov (United States)

Mueck, F G; Körner, M; Scherr, M K; Geyer, L L; Deak, Z; Linsenmaier, U; Reiser, M; Wirth, S

2012-03-01

To compare the image quality of dose-reduced 64-row abdominal CT reconstructed at different levels of adaptive statistical iterative reconstruction (ASIR) to full-dose baseline examinations reconstructed with filtered back-projection (FBP) in a clinical setting and upgrade situation. Abdominal baseline examinations (noise index NI = 29; LightSpeed VCT XT, GE) were intra-individually compared to follow-up studies on a CT with an ASIR option (NI = 43; Discovery HD750, GE), n = 42. Standard-kernel images were calculated with ASIR blendings of 0 - 100 % in slice and volume mode, respectively. Three experienced radiologists compared the image quality of these 567 sets to their corresponding full-dose baseline examination (- 2: diagnostically inferior, - 1: inferior, 0: equal, + 1: superior, + 2: diagnostically superior). Furthermore, a phantom was scanned. Statistical analysis used the Wilcoxon - the Mann-Whitney U-test and the intra-class correlation (ICC). The mean CTDIvol decreased from 19.7 ± 5.5 to 12.2 ± 4.7 mGy (p ASIR studies was comparable to the baseline at ASIR 50 % in slice (p = 0.18) and ASIR 50 - 100 % in volume mode (p > 0.10). Volume mode performed 73 % slower than slice mode (p ASIR 50 % in slice mode allowed for a dose reduction of 38 % in abdominal CT with comparable image quality and time expenditure. However, there is still further dose reduction potential for more complex reconstruction settings. © Georg Thieme Verlag KG Stuttgart · New York.

Effect of masking phase-only holograms on the quality of reconstructed images.

Science.gov (United States)

Deng, Yuanbo; Chu, Daping

2016-04-20

A phase-only hologram modulates the phase of the incident light and diffracts it efficiently with low energy loss because of the minimum absorption. Much research attention has been focused on how to generate phase-only holograms, and little work has been done to understand the effect and limitation of their partial implementation, possibly due to physical defects and constraints, in particular as in the practical situations where a phase-only hologram is confined or needs to be sliced or tiled. The present study simulates the effect of masking phase-only holograms on the quality of reconstructed images in three different scenarios with different filling factors, filling positions, and illumination intensity profiles. Quantitative analysis confirms that the width of the image point spread function becomes wider and the image quality decreases, as expected, when the filling factor decreases, and the image quality remains the same for different filling positions as well. The width of the image point spread function as derived from different filling factors shows a consistent behavior to that as measured directly from the reconstructed image, especially as the filling factor becomes small. Finally, mask profiles of different shapes and intensity distributions are shown to have more complicated effects on the image point spread function, which in turn affects the quality and textures of the reconstructed image.

Reconstruction of propagating Kelvin-Helmholtz vortices at Mercury's magnetopause

Science.gov (United States)

Sundberg, Torbjörn; Boardsen, Scott A.; Slavin, James A.; Blomberg, Lars G.; Cumnock, Judy A.; Solomon, Sean C.; Anderson, Brian J.; Korth, Haje

2011-12-01

A series of quasi-periodic magnetopause crossings were recorded by the MESSENGER spacecraft during its third flyby of Mercury on 29 September 2009, likely caused by a train of propagating Kelvin-Helmholtz (KH) vortices. We here revisit the observations to study the internal structure of the waves. Exploiting MESSENGER's rapid traversal of the magnetopause, we show that the observations permit a reconstruction of the structure of a rolled-up KH vortex directly from the spacecraft's magnetic field measurements. The derived geometry is consistent with all large-scale fluctuations in the magnetic field data, establishes the non-linear nature of the waves, and shows their vortex-like structure. In several of the wave passages, a reduction in magnetic field strength is observed in the middle of the wave, which is characteristic of rolled-up vortices and is related to the increase in magnetic pressure required to balance the centrifugal force on the plasma in the outer regions of a vortex, previously reported in computer simulations. As the KH wave starts to roll up, the reconstructed geometry suggests that the vortices develop two gradual transition regions in the magnetic field, possibly related to the mixing of magnetosheath and magnetospheric plasma, situated at the leading edges from the perspectives of both the magnetosphere and the magnetosheath.

Preliminary Study on the Enhancement of Reconstruction Speed for Emission Computed Tomography Using Parallel Processing

International Nuclear Information System (INIS)

Park, Min Jae; Lee, Jae Sung; Kim, Soo Mee; Kang, Ji Yeon; Lee, Dong Soo; Park, Kwang Suk

2009-01-01

Conventional image reconstruction uses simplified physical models of projection. However, real physics, for example 3D reconstruction, takes too long time to process all the data in clinic and is unable in a common reconstruction machine because of the large memory for complex physical models. We suggest the realistic distributed memory model of fast-reconstruction using parallel processing on personal computers to enable large-scale technologies. The preliminary tests for the possibility on virtual machines and various performance test on commercial super computer, Tachyon were performed. Expectation maximization algorithm with common 2D projection and realistic 3D line of response were tested. Since the process time was getting slower (max 6 times) after a certain iteration, optimization for compiler was performed to maximize the efficiency of parallelization. Parallel processing of a program on multiple computers was available on Linux with MPICH and NFS. We verified that differences between parallel processed image and single processed image at the same iterations were under the significant digits of floating point number, about 6 bit. Double processors showed good efficiency (1.96 times) of parallel computing. Delay phenomenon was solved by vectorization method using SSE. Through the study, realistic parallel computing system in clinic was established to be able to reconstruct by plenty of memory using the realistic physical models which was impossible to simplify

A Comprehensive Approach to Post-Conflict Reconstruction: German Experience in Afghanistan

Directory of Open Access Journals (Sweden)

Philip Olegovich Trunov

2016-12-01

Full Text Available As a part of a larger research project on complex linkages between security and development implemented by the Center for Security and Development Studies at the Lomonosov Moscow State University, this paper examines the complex dilemmas of pursuing comprehensive approach to post-conflict reconstruction with an example of Federal Republic of Germany’s experience with the Provincial Reconstruction Teams (PRTs in Afghanistan after the terrorist attacks of 9/11. The first section depicts the background of deployment of the PRTs on Afghan territory. The second section compares the U.S., British and German models of PRTs and assesses the role of those teams as vehicles of close civil-military, interagency coordination. The third and the fourth sections identify respectively characteristic features of the German PRTs’ activities in Kunduz and Badakhshan provinces and the main obstacles that hindered the achievement of key objectives. The conclusion contains a concise assessment of effectiveness and efficiency of PRTs as a mechanism of addressing complex challenges of post-conflict reconstruction and transition to peaceful development. It also postulates that the PRT model, regardless of some objective difficulties faced by various German agencies, may be very relevant in the future in fulfilling a revised agenda of the German foreign and defense policies in the XXI century.

Practical example of game theory application for production route selection

Science.gov (United States)

Olender, M.; Krenczyk, D.

2017-08-01

The opportunity which opens before manufacturers on the dynamic market, especially before those from the sector of the small and medium-sized enterprises, is associated with the use of the virtual organizations concept. The planning stage of such organizations could be based on supporting decision-making tasks using the tools and formalisms taken from the game theory. In the paper the model of the virtual manufacturing network, along with the practical example of decision-making situation as two person game and the decision strategies with an analysis of calculation results are presented.

Knowledge-based driver assistance systems traffic situation description and situation feature relevance

CERN Document Server

Huelsen, Michael

2014-01-01

The comprehension of a traffic situation plays a major role in driving a vehicle. Interpretable information forms a basis for future projection, decision making and action performing, such as navigating, maneuvering and driving control. Michael Huelsen provides an ontology-based generic traffic situation description capable of supplying various advanced driver assistance systems with relevant information about the current traffic situation of a vehicle and its environment. These systems are enabled to perform reasonable actions and approach visionary goals such as injury and accident free driv

Constructing Palaeo-DEMs in landscape evolution: example of the Geren catchment, Turkey

Science.gov (United States)

van Gorp, Wouter; Schoorl, Jeroen M.; Veldkamp, Tom; Maddy, Darrel; Demir, Tuncer; Aytac, Serdar

2017-04-01

How to reconstruct the past landscape and how does this influence your modelling results? This is an important paradigma in the soilscape and landscape evolution modelling community. Here an example of Turkey will be presented where a 300 ka LEM simulation requested to the thoroughly think about the initial landscape as an important input. What information can be used to know the morphology of a landscape 300 ka ago? The Geren catchment, a tributary of the upstream Gediz river near Kula, Turkey, has been influenced by base level changes during the Late Pleistocene and Holocene. Different lavaflows have blocked the Gediz and Geren river several times over in the timespan of the last 300 ka -200 Ka and in the recent Holocene. The heavily dissected Geren catchment shows a landscape evolution which is more complex than just a reaction on these base level changes. The steps and inputs of the palaeo DEM reconstruction will be presented and the modelling results will be presented. Keywords: Digital Elevation Model, Palaeo DEMs, Numerical modelling

A study of reconstruction accuracy for a cardiac SPECT system with multi-segmental collimation

International Nuclear Information System (INIS)

Yu, D.C.; Chang, W.; Pan, T.S.

1996-01-01

To improve the geometric efficiency of cardiac SPECT imaging, we have previously proposed to use a ring geometry and a multi-segmental collimation. The proposed collimation consists of multiple parallel collimators with most of the segments focused on a small central region, where the patient heart should be positioned. This scheme provides an significantly increased detection efficiency for the central region, but at the expense of reduced efficiency for the surrounding background. We have used computer simulations to evaluate the implication of this scheme on the accuracy of the reconstructed cardiac images. Two imaging situations were simulated, one with the heart well placed in the center, the other with the heart shifted outward and partially outside the central region; a neighboring high uptake liver was also simulated. The images were reconstructed with ML-EM and OS-EM methods using a complete attenuation map. The results indicate the deviation caused by truncation is not significant and is not strongly dependent on the activity of the liver when the heart is well positioned within the central region. The distribution of activity in the myocardium reconstructed with ML-EM or OS-EM is not sensitive to the noisy projections sampled from the background. When the heart is positioned improperly, the image reconstructed from the hybrid emission (a combination of high-count projections through the central region and low-count background projections) can restore the activity for the myocardium with increased noise variances in the section outside the central region

Europe and the Peak Oil, an emergency situation; Le Pic Petrolier et l'Europe, une situation d'urgence

Energy Technology Data Exchange (ETDEWEB)

Durand, B.

2011-07-01

The author shows why, in the coming years, severe oil supply difficulties will emerge in countries like France and the majority of European countries which do not possess significant oil resources on their land. He also highlights the risks for the European Union if no action is undertaken in front of this perspective. He discusses the British example as the United Kingdom has been the first country to use fossil fuels in an industrial way, and also possessed important quantities of oil and natural gas in the Northern Sea. He discusses the various data concerning the Peak Oil, and outlines the rapid decrease of available oil quantities on the international market. He highlights the difficult situation which will soon face Europe, and that measures must me implemented in emergency

Research on non-uniform strain profile reconstruction along fiber Bragg grating via genetic programming algorithm and interrelated experimental verification

Science.gov (United States)

Zheng, Shijie; Zhang, Nan; Xia, Yanjun; Wang, Hongtao

2014-03-01

A new heuristic strategy for the non-uniform strain profile reconstruction along Fiber Bragg Gratings is proposed in this paper, which is based on the modified transfer matrix and Genetic Programming(GP) algorithm. The present method uses Genetic Programming to determine the applied strain field as a function of position along the fiber length. The structures that undergo adaptation in genetic programming are hierarchical structures which are different from that of conventional genetic algorithm operating on strings. GP regress the strain profile function which matches the 'measured' spectrum best and makes space resolution of strain reconstruction arbitrarily high, or even infinite. This paper also presents an experimental verification of the reconstruction of non-homogeneous strain fields using GP. The results are compared with numerical calculations of finite element method. Both the simulation examples and experimental results demonstrate that Genetic Programming can effectively reconstruct continuous profile expression along the whole FBG, and greatly improves its computational efficiency and accuracy.

Incomplete projection reconstruction of computed tomography based on the modified discrete algebraic reconstruction technique

Science.gov (United States)

Yang, Fuqiang; Zhang, Dinghua; Huang, Kuidong; Gao, Zongzhao; Yang, YaFei

2018-02-01

Based on the discrete algebraic reconstruction technique (DART), this study aims to address and test a new improved algorithm applied to incomplete projection data to generate a high quality reconstruction image by reducing the artifacts and noise in computed tomography. For the incomplete projections, an augmented Lagrangian based on compressed sensing is first used in the initial reconstruction for segmentation of the DART to get higher contrast graphics for boundary and non-boundary pixels. Then, the block matching 3D filtering operator was used to suppress the noise and to improve the gray distribution of the reconstructed image. Finally, simulation studies on the polychromatic spectrum were performed to test the performance of the new algorithm. Study results show a significant improvement in the signal-to-noise ratios (SNRs) and average gradients (AGs) of the images reconstructed from incomplete data. The SNRs and AGs of the new images reconstructed by DART-ALBM were on average 30%-40% and 10% higher than the images reconstructed by DART algorithms. Since the improved DART-ALBM algorithm has a better robustness to limited-view reconstruction, which not only makes the edge of the image clear but also makes the gray distribution of non-boundary pixels better, it has the potential to improve image quality from incomplete projections or sparse projections.

Some comments on reconstructing the historical climate of California, USA

International Nuclear Information System (INIS)

Mock, C.J.

2006-01-01

This paper describes some examples of historical climate reconstruction pertaining to California, USA, focusing mostly on winter climate given the expected strongest teleconnection signals for this season. Climatic data consist of early instrumental data from the US Army Surgeon General at military forts, observers of the Smithsonian Institution, the Signal Service, and some private observers. Documentary (non-instrumental) data were also used in assessing extreme events. Original daily records of these data were carefully assessed for discontinuities from examining diurnal temperature ranges and daily precipitation amounts. The climatic reconstructions conducted were as follows: 1) winter precipitation time series for selected locations since 1850, particularly for Sacramento and San Francisco, 2) winter temperature time series for selected locations since 1850, and 3) analyses of an extreme flooding event in January 1862 and a landfalling tropical cyclone of September 1939. Results indicate distinctive wetter winters for central and northern California in the late nineteenth century, and some of these wetter years correspond to well-known very strong El Ni no events. Connections to weaker El Nino and La Nina events, however, are not clearly evident. The flood of January 1862 is considered unprecedented when compared to other floods of the last 130 years. The reconstruction of a landfalling tropical cyclone for September 1939 near Los Angeles suggests its intensity at just below hurricane strength

BES-II fast data reconstruction

International Nuclear Information System (INIS)

Rong Gang; Zhang Jiawen; Guo Yiqing; Zhang Shaoqiang; Zhao Dixin

2002-01-01

The BES-II fast data reconstruction is reported. Based on PC FARM and/or a 'Distributed Clustered Linux PC System', BES-II fast data reconstruction system is set up. With this system the BES-II data can be fully reconstructed in about 20 minutes after data collection. It takes only 12 minutes to fully reconstruct 30000 events, collected with BES-II detector at BEPC Collider, with a P III-800 PC. The detector performance can be examined based on fully reconstructed data in about 20 minutes after data taking in the BES-II experiment

Tagging partially reconstructed objects with jet substructure

Energy Technology Data Exchange (ETDEWEB)

Freytsis, Marat, E-mail: freytsis@uoregon.edu [Department of Physics, Harvard University, Cambridge, MA, 02138 (United States); Volansky, Tomer [Raymond and Beverly Sackler School of Physics and Astronomy, Tel-Aviv University, Tel-Aviv 69978 (Israel); Walsh, Jonathan R. [Ernest Orlando Lawrence Berkeley National Laboratory, University of California, Berkeley, CA 94720 (United States); Berkeley Center for Theoretical Physics, University of California, Berkeley, CA 94720 (United States)

2017-06-10

We present a new tagger which aims at identifying partially reconstructed objects, in which only some of the constituents are collected in a single jet. As an example, we focus on top decays in which either part of the hadronically decaying W or the b jet is soft or falls outside of the top jet cone. We construct an observable to identify remnant substructure from the decay and employ aggressive jet grooming to reject QCD backgrounds. The tagger is complementary to existing ones and works well in the intermediate boost regime where jet substructure techniques usually fail. It is anticipated that a similar tagger can be used to identify non-QCD hadronic jets, such as those expected from hidden valleys.

Tagging partially reconstructed objects with jet substructure

International Nuclear Information System (INIS)

Freytsis, Marat; Volansky, Tomer; Walsh, Jonathan R.

2017-01-01

We present a new tagger which aims at identifying partially reconstructed objects, in which only some of the constituents are collected in a single jet. As an example, we focus on top decays in which either part of the hadronically decaying W or the b jet is soft or falls outside of the top jet cone. We construct an observable to identify remnant substructure from the decay and employ aggressive jet grooming to reject QCD backgrounds. The tagger is complementary to existing ones and works well in the intermediate boost regime where jet substructure techniques usually fail. It is anticipated that a similar tagger can be used to identify non-QCD hadronic jets, such as those expected from hidden valleys.

Tagging partially reconstructed objects with jet substructure

Science.gov (United States)

Freytsis, Marat; Volansky, Tomer; Walsh, Jonathan R.

2017-06-01

We present a new tagger which aims at identifying partially reconstructed objects, in which only some of the constituents are collected in a single jet. As an example, we focus on top decays in which either part of the hadronically decaying W or the b jet is soft or falls outside of the top jet cone. We construct an observable to identify remnant substructure from the decay and employ aggressive jet grooming to reject QCD backgrounds. The tagger is complementary to existing ones and works well in the intermediate boost regime where jet substructure techniques usually fail. It is anticipated that a similar tagger can be used to identify non-QCD hadronic jets, such as those expected from hidden valleys.

Beyond filtered backprojection: A reconstruction software package for ion beam microtomography data

Science.gov (United States)

Habchi, C.; Gordillo, N.; Bourret, S.; Barberet, Ph.; Jovet, C.; Moretto, Ph.; Seznec, H.

2013-01-01

A new version of the TomoRebuild data reduction software package is presented, for the reconstruction of scanning transmission ion microscopy tomography (STIMT) and particle induced X-ray emission tomography (PIXET) images. First, we present a state of the art of the reconstruction codes available for ion beam microtomography. The algorithm proposed here brings several advantages. It is a portable, multi-platform code, designed in C++ with well-separated classes for easier use and evolution. Data reduction is separated in different steps and the intermediate results may be checked if necessary. Although no additional graphic library or numerical tool is required to run the program as a command line, a user friendly interface was designed in Java, as an ImageJ plugin. All experimental and reconstruction parameters may be entered either through this plugin or directly in text format files. A simple standard format is proposed for the input of experimental data. Optional graphic applications using the ROOT interface may be used separately to display and fit energy spectra. Regarding the reconstruction process, the filtered backprojection (FBP) algorithm, already present in the previous version of the code, was optimized so that it is about 10 times as fast. In addition, Maximum Likelihood Expectation Maximization (MLEM) and its accelerated version Ordered Subsets Expectation Maximization (OSEM) algorithms were implemented. A detailed user guide in English is available. A reconstruction example of experimental data from a biological sample is given. It shows the capability of the code to reduce noise in the sinograms and to deal with incomplete data, which puts a new perspective on tomography using low number of projections or limited angle.

Incomplete-data image reconstructions in industrial x-ray computerized tomography

International Nuclear Information System (INIS)

Tam, K.C.; Eberhard, J.W.; Mitchell, K.W.

1989-01-01

In earlier works it was concluded that image reconstruction from incomplete data can be achieved through an iterative transform algorithm which utilizes the a priori information on the object to compensate for the missing data. The image is transformed back and forth between the object space and the projection space, being corrected by the a priori information on the object in the object space, and by the known projections in the projection space. The a priori information in the object space includes a boundary enclosing the object, and an upper bound and a lower bound of the object density. In this paper we report the results of testing the iterative transform algorithm on experimental data. X-ray sinogram data of the cross section of a F404 high-pressure turbine blade made of Ni-based superalloy were supplied to us by the Aircraft Engine Business Group of General Electric Company at Cincinnati, Ohio. From the data set we simulated two kinds of incomplete data situations, incomplete projection and limited-angle scanning, and applied the iterative transform algorithm to reconstruct the images. The results validated the practical value of the iterative transform algorithm in reconstructing images from incomplete x-ray data, both incomplete projections and limited-angle data. In all the cases tested there were significant improvements in the appearance of the images after iterations. The visual improvements are substantiated in a quantitative manner by the plots of errors in wall thickness measurements which in general decrease in magnitude with iterations

Reconstruction of tau lepton decays and applications in the ATLAS experiment

Energy Technology Data Exchange (ETDEWEB)

Wagner, Peter [Rheinische Friedrich-Wilhelms-Universitaet Bonn (Germany)

2016-07-01

Final states with hadronically decaying tau leptons play an important part in the physics programme of the ATLAS experiment. Examples are measurements of Standard Model processes, evidence of the Higgs-boson Yukawa couplings to tau leptons, and searches for new physics phenomena, such as Supersymmetry. These analyses depended on robust tau reconstruction and excellent particle identification algorithms that provided suppression of backgrounds from jets, electrons and muons. I present a new ''particle flow'' method of reconstructing the individual charged and neutral hadrons in tau decays with the ATLAS detector which leads to a significant improvement in the tau energy and directional resolution. It further gives access to the individual charged and neutral hadron four-momenta and offers a high purity decay mode selection. These features will play a particularly important role in analyses that exploit tau spin information, such as a measurement of the CP mixture of the Higgs boson in H → ττ decays.

An evolutionary algorithm for tomographic reconstructions in limited data sets problems

International Nuclear Information System (INIS)

Turcanu, Catrinel; Craciunescu, Teddy

2000-01-01

The paper proposes a new method for tomographic reconstructions. Unlike nuclear medicine applications, in physical science problems we are often confronted with limited data sets: constraints in the number of projections or limited angle views. The problem of image reconstruction from projections may be considered as a problem of finding an image (solution) having projections that match the experimental ones. In our approach, we choose a statistical correlation coefficient to evaluate the fitness of any potential solution. The optimization process is carried out by an evolutionary algorithm. Our algorithm has some problem-oriented characteristics. One of them is that a chromosome, representing a potential solution, is not linear but coded as a matrix of pixels corresponding to a two-dimensional image. This kind of internal representation reflects the genuine manifestation and slight differences between two points situated in the original problem space give rise to similar differences once they become coded. Another particular feature is a newly built crossover operator: the grid-based crossover, suitable for high dimension two-dimensional chromosomes. Except for the population size and the dimension of the cutting grid for the grid-based crossover, all the other parameters of the algorithm are independent of the geometry of the tomographic reconstruction. The performances of the method are evaluated in comparison with a traditional tomographic method, based on the maximization of the entropy of the image, that proved to work well with limited data sets. The test phantom is typical for an application with limited data sets: the determination of the neutron energy spectra with time resolution in case of short-pulsed neutron emission. The qualitative judgement and also the quantitative one, based on some figures of merit, point out that the proposed method ensures an improved reconstruction of shapes, sizes and resolution in the image, even in the presence of noise

Complete reconstruction of all annunciator panels and their auxiliary facilities at central regulation office in KURRI

International Nuclear Information System (INIS)

Ishihara, Shinji; Kimura, Yasuhiro; Nakamura, Hiroshi; Nishino, Kunihiko; Higashiyama, Yukihiro; Okamoto, Ken-ichi; Maki, Hirotoshi; Kimura, Itsuro.

1988-08-01

At the Research Reactor Institute of Kyoto University (KURRI) which is a joint research center with Kyoto University Reactor KUR and so forth for nation-wide universities, most of important alarm signals from KUR, KUCA and other radiation facilities are concentrated at the central regulation office. Although the function of this office had been kept normal for more than 20 years, it became necessary to reconstruct all of its annunciator panels in order to add new alarm systems, for example a newly built spent fuel storage building and a newly installed cold neutron source in KUR, and to improve the functions of old alarm systems. Thereupon, all of the annunciator panels of this office together with their auxiliary facilities were completely reconstructed in the fiscal year of 1985. Furthermore the room of this office was enlarged and reconstructed thoroughly, since it was rather narrow and inconvenient before. This report describes the reconstruction work in detail: (1) Function of the central regulation office, (2) Outline of this work, (3) Design concept, (4) Method and special cares, (5) Reconstruction of the room, (6) New utility tunnels for cables, (7) Configulation and structure of new annunciator panels, (8) Cables and their reconnection, (9) Annunciator circuits, (10) Function of each panel, (11) Test and performance, and (12) concluding remarks and future plans. This experience may be useful for the case of reconstruction of the control desk and instrumentation panels of KUR in future. (author)

Enhanced capital-asset pricing model for the reconstruction of bipartite financial networks

Science.gov (United States)

Squartini, Tiziano; Almog, Assaf; Caldarelli, Guido; van Lelyveld, Iman; Garlaschelli, Diego; Cimini, Giulio

2017-09-01

Reconstructing patterns of interconnections from partial information is one of the most important issues in the statistical physics of complex networks. A paramount example is provided by financial networks. In fact, the spreading and amplification of financial distress in capital markets are strongly affected by the interconnections among financial institutions. Yet, while the aggregate balance sheets of institutions are publicly disclosed, information on single positions is mostly confidential and, as such, unavailable. Standard approaches to reconstruct the network of financial interconnection produce unrealistically dense topologies, leading to a biased estimation of systemic risk. Moreover, reconstruction techniques are generally designed for monopartite networks of bilateral exposures between financial institutions, thus failing in reproducing bipartite networks of security holdings (e.g., investment portfolios). Here we propose a reconstruction method based on constrained entropy maximization, tailored for bipartite financial networks. Such a procedure enhances the traditional capital-asset pricing model (CAPM) and allows us to reproduce the correct topology of the network. We test this enhanced CAPM (ECAPM) method on a dataset, collected by the European Central Bank, of detailed security holdings of European institutional sectors over a period of six years (2009-2015). Our approach outperforms the traditional CAPM and the recently proposed maximum-entropy CAPM both in reproducing the network topology and in estimating systemic risk due to fire sales spillovers. In general, ECAPM can be applied to the whole class of weighted bipartite networks described by the fitness model.

Direct cone-beam cardiac reconstruction algorithm with cardiac banding artifact correction

International Nuclear Information System (INIS)

Taguchi, Katsuyuki; Chiang, Beshan S.; Hein, Ilmar A.

2006-01-01

Multislice helical computed tomography (CT) is a promising noninvasive technique for coronary artery imaging. Various factors can cause inconsistencies in cardiac CT data, which can result in degraded image quality. These inconsistencies may be the result of the patient physiology (e.g., heart rate variations), the nature of the data (e.g., cone-angle), or the reconstruction algorithm itself. An algorithm which provides the best temporal resolution for each slice, for example, often provides suboptimal image quality for the entire volume since the cardiac temporal resolution (TRc) changes from slice to slice. Such variations in TRc can generate strong banding artifacts in multi-planar reconstruction images or three-dimensional images. Discontinuous heart walls and coronary arteries may compromise the accuracy of the diagnosis. A β-blocker is often used to reduce and stabilize patients' heart rate but cannot eliminate the variation. In order to obtain robust and optimal image quality, a software solution that increases the temporal resolution and decreases the effect of heart rate is highly desirable. This paper proposes an ECG-correlated direct cone-beam reconstruction algorithm (TCOT-EGR) with cardiac banding artifact correction (CBC) and disconnected projections redundancy compensation technique (DIRECT). First the theory and analytical model of the cardiac temporal resolution is outlined. Next, the performance of the proposed algorithms is evaluated by using computer simulations as well as patient data. It will be shown that the proposed algorithms enhance the robustness of the image quality against inconsistencies by guaranteeing smooth transition of heart cycles used in reconstruction

'Translation' and 'transformation' in the analytic situation: Freud-Bion-Laplanche.

Science.gov (United States)

Heenen-Wolff, Susann

2013-06-01

Following a short introduction to the core theses of Jean Laplanche's theory of a 'general seduction' the author presents the resultant clinical position of the analyst. In the same way that an adult sends 'enigmatic messages' to the child, it is the analyst's task to reopen this primal situation so that the patient can find new 'translations' for these messages. Laplanche distinguishes between the function of the analytic frame--which represents and supports attachment--and the 'sexual'--which is the repressed and constitutes the unconscious. Only the focus on this unconscious facilitates the deconstruction of 'incorrect' translations. Accordingly, the analyst, says Laplanche, should not take part in construction--this is a self-construction of the patient--but only in reconstruction. The author compares this clinical model with Freud's notions and the 'transformation processes' through the alpha function as described by Bion. She illustrates Laplanche's model and the interpretation strategy with case material. Copyright © 2013 Institute of Psychoanalysis.

Vector tomography for reconstructing electric fields with non-zero divergence in bounded domains

Science.gov (United States)

Koulouri, Alexandra; Brookes, Mike; Rimpiläinen, Ville

2017-01-01

In vector tomography (VT), the aim is to reconstruct an unknown multi-dimensional vector field using line integral data. In the case of a 2-dimensional VT, two types of line integral data are usually required. These data correspond to integration of the parallel and perpendicular projection of the vector field along the integration lines and are called the longitudinal and transverse measurements, respectively. In most cases, however, the transverse measurements cannot be physically acquired. Therefore, the VT methods are typically used to reconstruct divergence-free (or source-free) velocity and flow fields that can be reconstructed solely from the longitudinal measurements. In this paper, we show how vector fields with non-zero divergence in a bounded domain can also be reconstructed from the longitudinal measurements without the need of explicitly evaluating the transverse measurements. To the best of our knowledge, VT has not previously been used for this purpose. In particular, we study low-frequency, time-harmonic electric fields generated by dipole sources in convex bounded domains which arise, for example, in electroencephalography (EEG) source imaging. We explain in detail the theoretical background, the derivation of the electric field inverse problem and the numerical approximation of the line integrals. We show that fields with non-zero divergence can be reconstructed from the longitudinal measurements with the help of two sparsity constraints that are constructed from the transverse measurements and the vector Laplace operator. As a comparison to EEG source imaging, we note that VT does not require mathematical modeling of the sources. By numerical simulations, we show that the pattern of the electric field can be correctly estimated using VT and the location of the source activity can be determined accurately from the reconstructed magnitudes of the field.

Multiscale study on stochastic reconstructions of shale samples

Science.gov (United States)

Lili, J.; Lin, M.; Jiang, W. B.

2016-12-01

Shales are known to have multiscale pore systems, composed of macroscale fractures, micropores, and nanoscale pores within gas or oil-producing organic material. Also, shales are fissile and laminated, and the heterogeneity in horizontal is quite different from that in vertical. Stochastic reconstructions are extremely useful in situations where three-dimensional information is costly and time consuming. Thus the purpose of our paper is to reconstruct stochastically equiprobable 3D models containing information from several scales. In this paper, macroscale and microscale images of shale structure in the Lower Silurian Longmaxi are obtained by X-ray microtomography and nanoscale images are obtained by scanning electron microscopy. Each image is representative for all given scales and phases. Especially, the macroscale is four times coarser than the microscale, which in turn is four times lower in resolution than the nanoscale image. Secondly, the cross correlation-based simulation method (CCSIM) and the three-step sampling method are combined together to generate stochastic reconstructions for each scale. It is important to point out that the boundary points of pore and matrix are selected based on multiple-point connectivity function in the sampling process, and thus the characteristics of the reconstructed image can be controlled indirectly. Thirdly, all images with the same resolution are developed through downscaling and upscaling by interpolation, and then we merge multiscale categorical spatial data into a single 3D image with predefined resolution (the microscale image). 30 realizations using the given images and the proposed method are generated. The result reveals that the proposed method is capable of preserving the multiscale pore structure, both vertically and horizontally, which is necessary for accurate permeability prediction. The variogram curves and pore-size distribution for both original 3D sample and the generated 3D realizations are compared

Using Twitter and other social media platforms to provide situational awareness during an incident.

Science.gov (United States)

Tobias, Ed

2011-10-01

The recent use of social media by protesters in Iran, Egypt, Yemen and elsewhere has focused new attention on this communications medium. Government agencies and businesses, as well, are using social media to push information to their stakeholders. Those who are on the front lines of this information revolution, however, realise that social media is most effective when the communication is two-way. Unlike other media, social media allows information sharing. This, in turn, provides emergency managers with new situational-awareness resources when trying to mitigate an incident. As Federal Emergency Management Agency (FEMA) Administrator Craig Fugate told Information Week on January 19th, 2011: 'We can adjust much quicker if we can figure out how to have (a) two-way conversation and if we can look at the public as a resource. The public is putting out better situational awareness than many of our own agencies can.' This paper provides examples of how social media can be used as a situational-awareness resource and specific 'tools' that can be used to assist with this task.

Situational simulations in interactive video

Energy Technology Data Exchange (ETDEWEB)

Smith, L.J.

1991-07-01

The Westinghouse Hanford Company Advanced Training Technologies section is using situational simulations in several Interactive Video training courses. Two applications of situational simulations will be discussed. In the first, used in the Hanford General Employee Training course, the student evaluates employee's actions in simulations of possible workplace situations. In the second, used in the Criticality Safety course, students must follow well-defined procedures to complete tasks. Design and incorporation of situational simulations will be discussed. 3 refs.

Situational simulations in interactive video

International Nuclear Information System (INIS)

Smith, L.J.

1991-07-01

The Westinghouse Hanford Company Advanced Training Technologies section is using situational simulations in several Interactive Video training courses. Two applications of situational simulations will be discussed. In the first, used in the Hanford General Employee Training course, the student evaluates employee's actions in simulations of possible workplace situations. In the second, used in the Criticality Safety course, students must follow well-defined procedures to complete tasks. Design and incorporation of situational simulations will be discussed. 3 refs

Neurofunctional systems. 3D reconstructions with correlated neuroimaging

International Nuclear Information System (INIS)

Kretschmann, H.J.; Fiekert, W.; Gerke, M.; Vogt, H.; Weirich, D.; Wesemann, M.; Weinrich, W.

1998-01-01

This book introduces, for the first time, computer-generated images of the neurofunctional systems of the human brain. These images are more accurate than drawings. The main views presented are of the medial lemniscus system, auditory system, visual system, basal ganglia, corticospinal system, and the limbic system. The arteries and sulci of the cerebral hemispheres are also illustrated by computer. These images provide a three-dimensional orientation of the intracranial space and help, for example, to assess vascular functional disturbance of the brain. Clinicians will find these images valuable for the spatial interpretation of magnetic resonance (MR), computed tomography (CT), and positron emission tomography (PET) images since many neurofunctional systems cannot be visualized as isolated structures in neuroimaging. Computer-assisted surface reconstructions of the neurofunctional systems and the cerebral arteries serve as a basis for constructing these computer-generated images. The surface reconstructions are anatomically realistic having been created from brain sections with minimal deformations. The method of computer graphics, known as ray tracing, produces digital images form these reconstructions. The computer-generated methods are explained. The computer-generated images are accompanied by illustrations and texts on neuroanatomy and clinical practice. The neurofunctional systems of the human brain are also shown in sections so that the reader can mentally reconstruct the neurofunctional systems, thus facilitating the transformation of information into textbooks and atlantes of MR and CT imaging. The aim of this book is acquaint the reader with the three-dimensional aspects of the neurofunctional systems and the cerebral arteries of the human brain using methods of computer graphics. Computer scientists and those interested in this technique are provided with basic neuroanatomic and neurofunctional information. Physicians will have a clearer understanding

Neurofunctional systems. 3D reconstructions with correlated neuroimaging

Energy Technology Data Exchange (ETDEWEB)

Kretschmann, H.J.; Fiekert, W.; Gerke, M.; Vogt, H.; Weirich, D.; Wesemann, M. [Medizinische Hochschule Hannover (Germany). Abt. Neuroanatomie; Weinrich, W. [Staedtisches Krankenhaus Nordstadt, Hannover (Germany). Abt. fuer Neurologie

1998-12-31

This book introduces, for the first time, computer-generated images of the neurofunctional systems of the human brain. These images are more accurate than drawings. The main views presented are of the medial lemniscus system, auditory system, visual system, basal ganglia, corticospinal system, and the limbic system. The arteries and sulci of the cerebral hemispheres are also illustrated by computer. These images provide a three-dimensional orientation of the intracranial space and help, for example, to assess vascular functional disturbance of the brain. Clinicians will find these images valuable for the spatial interpretation of magnetic resonance (MR), computed tomography (CT), and positron emission tomography (PET) images since many neurofunctional systems cannot be visualized as isolated structures in neuroimaging. Computer-assisted surface reconstructions of the neurofunctional systems and the cerebral arteries serve as a basis for constructing these computer-generated images. The surface reconstructions are anatomically realistic having been created from brain sections with minimal deformations. The method of computer graphics, known as ray tracing, produces digital images form these reconstructions. The computer-generated methods are explained. The computer-generated images are accompanied by illustrations and texts on neuroanatomy and clinical practice. The neurofunctional systems of the human brain are also shown in sections so that the reader can mentally reconstruct the neurofunctional systems, thus facilitating the transformation of information into textbooks and atlantes of MR and CT imaging. The aim of this book is acquaint the reader with the three-dimensional aspects of the neurofunctional systems and the cerebral arteries of the human brain using methods of computer graphics. Computer scientists and those interested in this technique are provided with basic neuroanatomic and neurofunctional information. Physicians will have a clearer understanding

Contribution to the tracking and the 3D reconstruction of scenes composed of torus from image sequences a acquired by a moving camera

International Nuclear Information System (INIS)

Naudet, S.

1997-01-01

The three-dimensional perception of the environment is often necessary for a robot to correctly perform its tasks. One solution, based on the dynamic vision, consists in analysing time-varying monocular images to estimate the spatial geometry of the scene. This thesis deals with the reconstruction of torus by dynamic vision. Though this object class is restrictive, it enables to tackle the problem of reconstruction of bent pipes usually encountered in industrial environments. The proposed method is based on the evolution of apparent contours of objects in the sequence. Using the expression of torus limb boundaries, it is possible to recursively estimate the object three-dimensional parameters by minimising the error between the predicted projected contours and the image contours. This process, which is performed by a Kalman filter, does not need a precise knowledge of the camera displacement or any matching of the tow limbs belonging to the same object. To complete this work, temporal tracking of objects which deals with occlusion situations is proposed. The approach consists in modeling and interpreting the apparent motion of objects in the successive images. The motion interpretation, based on a simplified representation of the scene, allows to recover pertinent three-dimensional information which is used to manage occlusion situations. Experiments, on synthetic and real images, proves he validity of the tracking and the reconstruction processes. (author)

Hybrid spectral CT reconstruction.

Directory of Open Access Journals (Sweden)

Darin P Clark

Full Text Available Current photon counting x-ray detector (PCD technology faces limitations associated with spectral fidelity and photon starvation. One strategy for addressing these limitations is to supplement PCD data with high-resolution, low-noise data acquired with an energy-integrating detector (EID. In this work, we propose an iterative, hybrid reconstruction technique which combines the spectral properties of PCD data with the resolution and signal-to-noise characteristics of EID data. Our hybrid reconstruction technique is based on an algebraic model of data fidelity which substitutes the EID data into the data fidelity term associated with the PCD reconstruction, resulting in a joint reconstruction problem. Within the split Bregman framework, these data fidelity constraints are minimized subject to additional constraints on spectral rank and on joint intensity-gradient sparsity measured between the reconstructions of the EID and PCD data. Following a derivation of the proposed technique, we apply it to the reconstruction of a digital phantom which contains realistic concentrations of iodine, barium, and calcium encountered in small-animal micro-CT. The results of this experiment suggest reliable separation and detection of iodine at concentrations ≥ 5 mg/ml and barium at concentrations ≥ 10 mg/ml in 2-mm features for EID and PCD data reconstructed with inherent spatial resolutions of 176 μm and 254 μm, respectively (point spread function, FWHM. Furthermore, hybrid reconstruction is demonstrated to enhance spatial resolution within material decomposition results and to improve low-contrast detectability by as much as 2.6 times relative to reconstruction with PCD data only. The parameters of the simulation experiment are based on an in vivo micro-CT experiment conducted in a mouse model of soft-tissue sarcoma. Material decomposition results produced from this in vivo data demonstrate the feasibility of distinguishing two K-edge contrast agents with

Hybrid spectral CT reconstruction

Science.gov (United States)

Clark, Darin P.

2017-01-01

Current photon counting x-ray detector (PCD) technology faces limitations associated with spectral fidelity and photon starvation. One strategy for addressing these limitations is to supplement PCD data with high-resolution, low-noise data acquired with an energy-integrating detector (EID). In this work, we propose an iterative, hybrid reconstruction technique which combines the spectral properties of PCD data with the resolution and signal-to-noise characteristics of EID data. Our hybrid reconstruction technique is based on an algebraic model of data fidelity which substitutes the EID data into the data fidelity term associated with the PCD reconstruction, resulting in a joint reconstruction problem. Within the split Bregman framework, these data fidelity constraints are minimized subject to additional constraints on spectral rank and on joint intensity-gradient sparsity measured between the reconstructions of the EID and PCD data. Following a derivation of the proposed technique, we apply it to the reconstruction of a digital phantom which contains realistic concentrations of iodine, barium, and calcium encountered in small-animal micro-CT. The results of this experiment suggest reliable separation and detection of iodine at concentrations ≥ 5 mg/ml and barium at concentrations ≥ 10 mg/ml in 2-mm features for EID and PCD data reconstructed with inherent spatial resolutions of 176 μm and 254 μm, respectively (point spread function, FWHM). Furthermore, hybrid reconstruction is demonstrated to enhance spatial resolution within material decomposition results and to improve low-contrast detectability by as much as 2.6 times relative to reconstruction with PCD data only. The parameters of the simulation experiment are based on an in vivo micro-CT experiment conducted in a mouse model of soft-tissue sarcoma. Material decomposition results produced from this in vivo data demonstrate the feasibility of distinguishing two K-edge contrast agents with a spectral

Algorithmic procedures for Bayesian MEG/EEG source reconstruction in SPM☆

Science.gov (United States)

López, J.D.; Litvak, V.; Espinosa, J.J.; Friston, K.; Barnes, G.R.

2014-01-01

The MEG/EEG inverse problem is ill-posed, giving different source reconstructions depending on the initial assumption sets. Parametric Empirical Bayes allows one to implement most popular MEG/EEG inversion schemes (Minimum Norm, LORETA, etc.) within the same generic Bayesian framework. It also provides a cost-function in terms of the variational Free energy—an approximation to the marginal likelihood or evidence of the solution. In this manuscript, we revisit the algorithm for MEG/EEG source reconstruction with a view to providing a didactic and practical guide. The aim is to promote and help standardise the development and consolidation of other schemes within the same framework. We describe the implementation in the Statistical Parametric Mapping (SPM) software package, carefully explaining each of its stages with the help of a simple simulated data example. We focus on the Multiple Sparse Priors (MSP) model, which we compare with the well-known Minimum Norm and LORETA models, using the negative variational Free energy for model comparison. The manuscript is accompanied by Matlab scripts to allow the reader to test and explore the underlying algorithm. PMID:24041874

Reconstruction of 3D flow structures in a cylindrical cavity with a rotating lid using time-resolved stereo PIV

DEFF Research Database (Denmark)

Meyer, Knud Erik; Sørensen, Jens Nørkær; Naumov, Igor

2009-01-01

variations. The flow in a cylindrical cavity with a rotating lid of a height of three radii and a Reynolds number of about 3500 is used as example. The reconstruction identifies a series of flow structures including axisymmetric vortex breakdown and distinct vortex structures along the cylinder wall....

Effects of Worked Examples, Example-Problem Pairs, and Problem-Example Pairs Compared to Problem Solving

NARCIS (Netherlands)

Van Gog, Tamara; Kester, Liesbeth; Paas, Fred

2010-01-01

Van Gog, T., Kester, L., & Paas, F. (2010, August). Effects of worked examples, example-problem pairs, and problem-example pairs compared to problem solving. Paper presented at the Biannual EARLI SIG meeting of Instructional design and Learning and instruction with computers, Ulm, Germany.

Tomographic reconstruction by using FPSIRT (Fast Particle System Iterative Reconstruction Technique)

Energy Technology Data Exchange (ETDEWEB)

Moreira, Icaro Valgueiro M.; Melo, Silvio de Barros; Dantas, Carlos; Lima, Emerson Alexandre; Silva, Ricardo Martins; Cardoso, Halisson Alberdan C., E-mail: ivmm@cin.ufpe.br, E-mail: sbm@cin.ufpe.br, E-mail: rmas@cin.ufpe.br, E-mail: hacc@cin.ufpe.br, E-mail: ccd@ufpe.br, E-mail: eal@cin.ufpe.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

2015-07-01

The PSIRT (Particle System Iterative Reconstruction Technique) is a method of tomographic image reconstruction primarily designed to work with configurations suitable for industrial applications. A particle system is an optimization technique inspired in real physical systems that associates to the reconstructing material a set of particles with certain physical features, subject to a force eld, which can produce movement. The system constantly updates the set of particles by repositioning them in such a way as to approach the equilibrium. The elastic potential along a trajectory is a function of the difference between the attenuation coefficient in the current configuration and the corresponding input data. PSIRT has been successfully used to reconstruct simulated and real objects subject to sets of parallel and fanbeam lines in different angles, representing typical gamma-ray tomographic arrangements. One of PSIRT's limitation was its performance, too slow for real time scenarios. In this work, it is presented a reformulation in PSIRT's computational model, which is able to grant the new algorithm, the FPSIRT - Fast System Iterative Reconstruction Technique, a performance up to 200-time faster than PSIRT's. In this work a comparison of their application to real and simulated data from the HSGT, High Speed Gamma Tomograph, is presented. (author)

Tomographic reconstruction by using FPSIRT (Fast Particle System Iterative Reconstruction Technique)

International Nuclear Information System (INIS)

Moreira, Icaro Valgueiro M.; Melo, Silvio de Barros; Dantas, Carlos; Lima, Emerson Alexandre; Silva, Ricardo Martins; Cardoso, Halisson Alberdan C.

2015-01-01

The PSIRT (Particle System Iterative Reconstruction Technique) is a method of tomographic image reconstruction primarily designed to work with configurations suitable for industrial applications. A particle system is an optimization technique inspired in real physical systems that associates to the reconstructing material a set of particles with certain physical features, subject to a force eld, which can produce movement. The system constantly updates the set of particles by repositioning them in such a way as to approach the equilibrium. The elastic potential along a trajectory is a function of the difference between the attenuation coefficient in the current configuration and the corresponding input data. PSIRT has been successfully used to reconstruct simulated and real objects subject to sets of parallel and fanbeam lines in different angles, representing typical gamma-ray tomographic arrangements. One of PSIRT's limitation was its performance, too slow for real time scenarios. In this work, it is presented a reformulation in PSIRT's computational model, which is able to grant the new algorithm, the FPSIRT - Fast System Iterative Reconstruction Technique, a performance up to 200-time faster than PSIRT's. In this work a comparison of their application to real and simulated data from the HSGT, High Speed Gamma Tomograph, is presented. (author)

Penalised Maximum Likelihood Simultaneous Longitudinal PET Image Reconstruction with Difference-Image Priors.

Science.gov (United States)

Ellis, Sam; Reader, Andrew J

2018-04-26

Many clinical contexts require the acquisition of multiple positron emission tomography (PET) scans of a single subject, for example to observe and quantify changes in functional behaviour in tumours after treatment in oncology. Typically, the datasets from each of these scans are reconstructed individually, without exploiting the similarities between them. We have recently shown that sharing information between longitudinal PET datasets by penalising voxel-wise differences during image reconstruction can improve reconstructed images by reducing background noise and increasing the contrast-to-noise ratio of high activity lesions. Here we present two additional novel longitudinal difference-image priors and evaluate their performance using 2D simulation studies and a 3D real dataset case study. We have previously proposed a simultaneous difference-image-based penalised maximum likelihood (PML) longitudinal image reconstruction method that encourages sparse difference images (DS-PML), and in this work we propose two further novel prior terms. The priors are designed to encourage longitudinal images with corresponding differences which have i) low entropy (DE-PML), and ii) high sparsity in their spatial gradients (DTV-PML). These two new priors and the originally proposed longitudinal prior were applied to 2D simulated treatment response [ 18 F]fluorodeoxyglucose (FDG) brain tumour datasets and compared to standard maximum likelihood expectation-maximisation (MLEM) reconstructions. These 2D simulation studies explored the effects of penalty strengths, tumour behaviour, and inter-scan coupling on reconstructed images. Finally, a real two-scan longitudinal data series acquired from a head and neck cancer patient was reconstructed with the proposed methods and the results compared to standard reconstruction methods. Using any of the three priors with an appropriate penalty strength produced images with noise levels equivalent to those seen when using standard

The evolving breast reconstruction

DEFF Research Database (Denmark)

Thomsen, Jørn Bo; Gunnarsson, Gudjon Leifur

2014-01-01

The aim of this editorial is to give an update on the use of the propeller thoracodorsal artery perforator flap (TAP/TDAP-flap) within the field of breast reconstruction. The TAP-flap can be dissected by a combined use of a monopolar cautery and a scalpel. Microsurgical instruments are generally...... not needed. The propeller TAP-flap can be designed in different ways, three of these have been published: (I) an oblique upwards design; (II) a horizontal design; (III) an oblique downward design. The latissimus dorsi-flap is a good and reliable option for breast reconstruction, but has been criticized...... for oncoplastic and reconstructive breast surgery and will certainly become an invaluable addition to breast reconstructive methods....

Reconstructing see-saw models

International Nuclear Information System (INIS)

Ibarra, Alejandro

2007-01-01

In this talk we discuss the prospects to reconstruct the high-energy see-saw Lagrangian from low energy experiments in supersymmetric scenarios. We show that the model with three right-handed neutrinos could be reconstructed in theory, but not in practice. Then, we discuss the prospects to reconstruct the model with two right-handed neutrinos, which is the minimal see-saw model able to accommodate neutrino observations. We identify the relevant processes to achieve this goal, and comment on the sensitivity of future experiments to them. We find the prospects much more promising and we emphasize in particular the importance of the observation of rare leptonic decays for the reconstruction of the right-handed neutrino masses

Problem situations in management activity

OpenAIRE

N.A. DUBINKO

2009-01-01

This article reviews contemporary methodological and theoretical approaches to the problem situations in management activity. Revealed and analyzed the types of problem situations managers dealing with in their activity. Rank correlation of problem situations shows distinctions depending on management work experience. Revealed gender distinctions in the managers' ideas of management problems.

Rebuilding DEMATEL threshold value: an example of a food and beverage information system.

Science.gov (United States)

Hsieh, Yi-Fang; Lee, Yu-Cheng; Lin, Shao-Bin

2016-01-01

This study demonstrates how a decision-making trial and evaluation laboratory (DEMATEL) threshold value can be quickly and reasonably determined in the process of combining DEMATEL and decomposed theory of planned behavior (DTPB) models. Models are combined to identify the key factors of a complex problem. This paper presents a case study of a food and beverage information system as an example. The analysis of the example indicates that, given direct and indirect relationships among variables, if a traditional DTPB model only simulates the effects of the variables without considering that the variables will affect the original cause-and-effect relationships among the variables, then the original DTPB model variables cannot represent a complete relationship. For the food and beverage example, a DEMATEL method was employed to reconstruct a DTPB model and, more importantly, to calculate reasonable DEMATEL threshold value for determining additional relationships of variables in the original DTPB model. This study is method-oriented, and the depth of investigation into any individual case is limited. Therefore, the methods proposed in various fields of study should ideally be used to identify deeper and more practical implications.

New method of three-dimensional reconstruction from two-dimensional MR data sets

International Nuclear Information System (INIS)

Wrazidlo, W.; Schneider, S.; Brambs, H.J.; Richter, G.M.; Kauffmann, G.W.; Geiger, B.; Fischer, C.

1989-01-01

In medical diagnosis and therapy, cross-sectional images are obtained by means of US, CT, or MR imaging. The authors propose a new solution to the problem of constructing a shape over a set of cross-sectional contours from two-dimensional (2D) MR data sets. The authors' method reduces the problem of constructing a shape over the cross sections to one of constructing a sequence of partial shapes, each of them connecting two cross sections lying on adjacent planes. The solution makes use of the Delaunay triangulation, which is isomorphic in that specific situation. The authors compute this Delaunay triangulation. Shape reconstruction is then achieved section by pruning Delaunay triangulations

Pre-operative planning for mandibular reconstruction - A full digital planning workflow resulting in a patient specific reconstruction

Science.gov (United States)

2011-01-01

Objectives Reconstruction of large mandiblular defects following ablative oncologic surgery could be done by using vascularized bone transfer or, more often, primarily with simultaneous or delayed bone grafting, using load bearing reconstruction plates. Bending of these reconstruction plates is typically directed along the outer contour of the original mandible. Simultaneously or in a second operation vascularized or non-vascularized bone is fixed to the reconstruction plate. However, the prosthodontic-driven backward planning to ease bony reconstruction of the mandible in terms of dental rehabilitation using implant-retained overdentures might be an eligible solution. The purpose of this work was to develop, establish and clinically evaluate a novel 3D planning procedure for mandibular reconstruction. Materials and methods Three patients with tumors involving the mandible, which included squamous cell carcinoma in the floor of the mouth and keratocystic odontogenic tumor, were treated surgically by hemimandibulectomy. Results In primary alloplastic mandible reconstruction, shape and size of the reconstruction plate could be predefined and prebent prior to surgery. Clinical relevance This study provides modern treatment strategies for mandibular reconstruction. PMID:21968330

Reconstruction of emission coefficients for a non-axisymmetric coupling arc by algebraic reconstruction technique

International Nuclear Information System (INIS)

Zhang Guangjun; Xiong Jun; Gao Hongming; Wu Lin

2011-01-01

A preliminary investigation of tomographic reconstruction of an asymmetric arc plasma has been carried out. The objective of this work aims at reconstructing emission coefficients of a non-axisymmetric coupling arc from measured intensities by means of an algebraic reconstruction technique (ART). In order to define the optimal experimental scheme for good quality with limited views, the dependence of the reconstruction quality on three configurations (four, eight, ten projection angles) are presented and discussed via a displaced Gaussian model. Then, the emission coefficients of a free burning arc are reconstructed by the ART with the ten-view configuration and an Abel inversion, respectively, and good agreement is obtained. Finally, the emission coefficient profiles of the coupling arc are successfully achieved with the ten-view configuration. The results show that the distribution of emission coefficient for the coupling arc is different from centrosymmetric shape. The ART is perfectly suitable for reconstructing emission coefficients of the coupling arc with the ten-view configuration, proving the feasibility and utility of the ART to characterize an asymmetric arc.

APPLICATION OF 3D MODELING IN 3D PRINTING FOR THE LOWER JAW RECONSTRUCTION

Directory of Open Access Journals (Sweden)

Yu. Yu. Dikov

2015-01-01

Full Text Available Aim of study: improvement of functional and aesthetic results of microsurgery reconstructions of the lower jaw due to the use of the methodology of 3D modeling and 3D printing. Application of this methodology has been demonstrated on the example of treatment of 4 patients with locally distributed tumors of the mouth cavity, who underwent excision of the tumor with simultaneous reconstruction of the lower jaw with revascularized fibular graft.Before, one patient has already undergo segmental resection of the lower jaw with the defect replacement with the avascular ileac graft and a reconstruction plate. Then, a relapse of the disease and lysis of the graft has developed with him. Modeling of the graft according to the shape of the lower jaw was performed by making osteotomies of the bone part of the graft using three-dimensional virtual models created by computed tomography data. Then these 3D models were printed with a 3D printer of plastic with the scale of 1:1 with the fused deposition modeling (FDM technology and were used during the surgery in the course of modeling of the graft. Sterilizing of the plastic model was performed in the formalin chamber.This methodology allowed more specific reconstruction of the resected fragment of the lower jaw and get better functional and aesthetic results and prepare patients to further dental rehabilitation. Advantages of this methodology are the possibility of simultaneous performance of stages of reconstruction and resection and shortening of the time of surgery.

Segeberg 1600 - Reconstructing a Historic Town for Virtual Reality Visualisation as AN Immersive Experience

Science.gov (United States)

Deggim, S.; Kersten, T. P.; Tschirschwitz, F.; Hinrichsen, N.

2017-11-01

The 3D reconstruction of historic buildings and cities offers an opportunity to experience the history of relevant objects and their development over the centuries. Digital visualisations of such historic objects allow for a more natural view of history as well as showing information that is not possible in a real world setting. New presentation forms, such as the virtual reality (VR) system HTC Vive, can be used to disseminate information in another dimension and simplify the access by changing the user's viewpoint from a listener and viewer into being an integrated part of an interactive situation. In general, this approach is a combination of education and entertainment, also known as "edutainment" or "gamification", a term used in the education sector as describing where motivation to learn is encouraged through adding a competitive element. It is thus a step away from simple consumption of information towards experiencing information and a more literal interpretation of "living history". In this contribution, we present the development of a 3D reconstruction of the two towns Segeberg and Gieschenhagen (today: Bad Segeberg) in Schleswig-Holstein, Germany in the Early Modern Age around 1600. The historic landscape and its conversion from a reconstructed virtual town model into an interactive VR application is also described. The reconstruction is based on a recent digital terrain model as well as survey data of surviving buildings, historic visual information based on historic drawings and written accounts from that era. All datasets are combined to a single walkable virtual world that spans approximately 3 km2.

Mind Invasion: Situated Affectivity and the Corporate Life Hack

Directory of Open Access Journals (Sweden)

Jan eSlaby

2016-02-01

Full Text Available In view of the philosophical problems that vex the debate on situated affectivity, it can seem wise to focus on simple cases. Accordingly, theorists often single out scenarios in which an individual employs a device in order to enhance their emotional experience, or to achieve new kinds of experience altogether, such as playing an instrument, going to the movies or sporting a fancy handbag. I argue that this narrow focus on cases that fit a ‘user/resource model’ tends to channel attention away from more complex and also more problematic instances of situated affectivity. Among these are scenarios in which a social domain draws individuals into certain modes of affective interaction, often by way of attunement and habituation to affective styles and interaction patterns that are normative in the domain in question. This can lead to a phenomenon that is not so much ‘mind extension’ than ‘mind invasion’: affectivity is dynamically framed and modulated from without, often contrary to the prior orientations of the individuals in question. As an example, I discuss affective patterns prevalent in today’s corporate workplace. I claim that workplace affect sometimes contributes to what is effectively a ‘hack’ of employees’ subjectivity.

PROMISE: parallel-imaging and compressed-sensing reconstruction of multicontrast imaging using SharablE information.

Science.gov (United States)

Gong, Enhao; Huang, Feng; Ying, Kui; Wu, Wenchuan; Wang, Shi; Yuan, Chun

2015-02-01

A typical clinical MR examination includes multiple scans to acquire images with different contrasts for complementary diagnostic information. The multicontrast scheme requires long scanning time. The combination of partially parallel imaging and compressed sensing (CS-PPI) has been used to reconstruct accelerated scans. However, there are several unsolved problems in existing methods. The target of this work is to improve existing CS-PPI methods for multicontrast imaging, especially for two-dimensional imaging. If the same field of view is scanned in multicontrast imaging, there is significant amount of sharable information. It is proposed in this study to use manifold sharable information among multicontrast images to enhance CS-PPI in a sequential way. Coil sensitivity information and structure based adaptive regularization, which were extracted from previously reconstructed images, were applied to enhance the following reconstructions. The proposed method is called Parallel-imaging and compressed-sensing Reconstruction Of Multicontrast Imaging using SharablE information (PROMISE). Using L1 -SPIRiT as a CS-PPI example, results on multicontrast brain and carotid scans demonstrated that lower error level and better detail preservation can be achieved by exploiting manifold sharable information. Besides, the privilege of PROMISE still exists while there is interscan motion. Using the sharable information among multicontrast images can enhance CS-PPI with tolerance to motions. © 2014 Wiley Periodicals, Inc.

Reconstruction of a whole-body counter into a process computer-controlled low-level whole-body scanner

International Nuclear Information System (INIS)

Hamann, C.

1975-01-01

A report is given on the state of the research project to reconstruct our whole-body counter with solid geometries into a scanning type one. The object is to develop a process computer controlled 'adaptive system'. The self-built scan mechanics are explained and the advantages and problems of applying stepping motors are gone into. A stepping motor coordinates control is presented. As the planned scanner and the process computer form a digital controlled system, all theoretical and actual values as well as the control orders from the process computer must be directly controllable. A CAMAC system was not used for economical reasons, the process periphery was made controllable by self building of interfaces to and from the computer. As example, the available multi-channel analyzers were converted to external controlling. The price-moderate and relatively simple self-built set-up are outlined and an example is given of how a TELETYPE version is reconstructed into a fast electronic interface. A BUS-MULTIPLEX system was developed which generates all necessary DI/DO interfaces out of one DI and DO address of the process computer only. The essential part of this system is given. (orig./LH) [de

The tourist function in a car factory Audi Forum Ingolstadt example

Directory of Open Access Journals (Sweden)

Cudny Waldemar

2016-09-01

Full Text Available The article presents modern car industry and tourism issues. It is a case study of a multifunctional centre - the Audi Forum Ingolstadt, situated next to a large Audi factory in Ingolstadt, Germany. It was created in order to promote the Audi brand and provide service for the customers picking up their cars in Ingolstadt. It also performs tourist functions as it focuses on providing service for the people who arrive to visit the car factory, the Audi museum mobile and the region. The centre offers specific tourist products based on particular experiences, which may be included in industrial tourism. The facilities in the Audi Forum Ingolstadt are tourist assets in themselves; they may also be seen as tourist infrastructure. It is also a place where numerous events are held, attracting tourists. The Audi Forum Ingolstadt is an example of a multifunctional centre with distinctive tourist functions, situated on the premises of a large modern car factory.

Energy situation - Forth quarter 2016. Energy situation October 2016; Energy situation November 2016; Energy situation December 2016

International Nuclear Information System (INIS)

Guggemos, Fabien; Misak, Evelyne; Mombel, David; Moreau, Sylvain

2017-02-01

This publication presents, first, a quarterly report of the French energy situation: primary energy consumption, energy independence and CO_2 emissions, national production, imports, exports, energy costs, average and spot prices. Data are presented separately for solid mineral fuels, petroleum products, natural gas and electricity. Month-to-month details are summarized in a second part, in the form of tables and graphs

Energy situation - First quarter 2017. Energy situation January 2017; Energy situation February 2017; Energy situation March 2017

International Nuclear Information System (INIS)

Guggemos, Fabien; Misak, Evelyne; Mombel, David; Moreau, Sylvain

2017-05-01

This publication presents, first, a quarterly report of the French energy situation: primary energy consumption, energy independence and CO_2 emissions, national production, imports, exports, energy costs, average and spot prices. Data are presented separately for solid mineral fuels, petroleum products, natural gas and electricity. Month-to-month details are summarized in a second part, in the form of tables and graphs

Atmospheric dispersion and inverse modelling for the reconstruction of accidental sources of pollutants

International Nuclear Information System (INIS)

Winiarek, Victor

2014-01-01

Uncontrolled releases of pollutant in the atmosphere may be the consequence of various situations: accidents, for instance leaks or explosions in an industrial plant, or terrorist attacks such as biological bombs, especially in urban areas. In the event of such situations, authorities' objectives are various: predict the contaminated zones to apply first countermeasures such as evacuation of concerned population; determine the source location; assess the long-term polluted areas, for instance by deposition of persistent pollutants in the soil. To achieve these objectives, numerical models can be used to model the atmospheric dispersion of pollutants. We will first present the different processes that govern the transport of pollutants in the atmosphere, then the different numerical models that are commonly used in this context. The choice between these models mainly depends of the scale and the details one seeks to take into account. We will then present several inverse modeling methods to estimate the emission as well as statistical methods to estimate prior errors, to which the inversion is very sensitive. Several case studies are presented, using synthetic data as well as real data such as the estimation of source terms from the Fukushima accident in March 2011. From our results, we estimate the Cesium-137 emission to be between 12 and 19 PBq with a standard deviation between 15 and 65% and the Iodine-131 emission to be between 190 and 380 PBq with a standard deviation between 5 and 10%. Concerning the localization of an unknown source of pollutant, two strategies can be considered. On one hand parametric methods use a limited number of parameters to characterize the source term to be reconstructed. To do so, strong assumptions are made on the nature of the source. The inverse problem is hence to estimate these parameters. On the other hand nonparametric methods attempt to reconstruct a full emission field. Several parametric and nonparametric methods are

Situational theory of leadership.

Science.gov (United States)

Waller, D J; Smith, S R; Warnock, J T

1989-11-01

The situational theory of leadership and the LEAD instruments for determining leadership style are explained, and the application of the situational leadership theory to the process of planning for and implementing organizational change is described. Early studies of leadership style identified two basic leadership styles: the task-oriented autocratic style and the relationship-oriented democratic style. Subsequent research found that most leaders exhibited one of four combinations of task and relationship behaviors. The situational leadership theory holds that the difference between the effectiveness and ineffectiveness of the four leadership styles is the appropriateness of the leader's behavior to the particular situation in which it is used. The task maturity of the individual or group being led must also be accounted for; follower readiness is defined in terms of the capacity to set high but attainable goals, willingness or ability to accept responsibility, and possession of the necessary education or experience for a specific task. A person's leadership style, range, and adaptability can be determined from the LEADSelf and LEADOther questionnaires. By applying the principles of the situational leadership theory and adapting their managerial styles to specific tasks and levels of follower maturity, the authors were successful in implementing 24-hour pharmacokinetic dosing services provided by staff pharmacists with little previous experience in clinical services. The situational leadership model enables a leader to identify a task, set goals, determine the task maturity of the individual or group, select an appropriate leadership style, and modify the style as change occurs. Pharmacy managers can use this model when implementing clinical pharmacy services.

Three-dimensional ICT reconstruction

International Nuclear Information System (INIS)

Zhang Aidong; Li Ju; Chen Fa; Sun Lingxia

2005-01-01

The three-dimensional ICT reconstruction method is the hot topic of recent ICT technology research. In the context, qualified visual three-dimensional ICT pictures are achieved through multi-piece two-dimensional images accumulation by, combining with thresholding method and linear interpolation. Different direction and different position images of the reconstructed pictures are got by rotation and interception respectively. The convenient and quick method is significantly instructive to more complicated three-dimensional reconstruction of ICT images. (authors)

Three-dimensional ICT reconstruction

International Nuclear Information System (INIS)

Zhang Aidong; Li Ju; Chen Fa; Sun Lingxia

2004-01-01

The three-dimensional ICT reconstruction method is the hot topic of recent ICT technology research. In the context qualified visual three-dimensional ICT pictures are achieved through multi-piece two-dimensional images accumulation by order, combining with thresholding method and linear interpolation. Different direction and different position images of the reconstructed pictures are got by rotation and interception respectively. The convenient and quick method is significantly instructive to more complicated three-dimensional reconstruction of ICT images. (authors)

Reconstruction of Nanoindustry Institutes in the Russian Federation in the Unfavorable Global Environment

Directory of Open Access Journals (Sweden)

Oleg Vasilyevich Inshakov

2015-12-01

Full Text Available Nanoindustry evolution is caused by the global extension of new technological mode, which requires the construction of effective institutes and mechanisms of regulating its subjects’ relations. In the conditions of unfavorable external environment and unsolved internal problems of Russian nanoindustry development, not only the role of basic nanoindustrialization institutes increases, but the problem of reconstructing their activity and prospective updating of institutions arises. Regardless of level and scale, forms and content, the institutional reconstruction will become a part of a rapid response to external changes and a component of strategic programming of Russian nanoindustry. The Russian government acted as a main institute of national nanoindustry development and support. New special-purpose/universal, financial/nonfinancial, formal/informal institutes, which make up the structure of target investment and resource supply of nanoindustry at various stages of its formation, become active agents of state policy in this sphere. This institutional system should reflect the level and type structure of nanoindustry, corresponding to its strategic perspective. An important role in overcoming negative trends in nanoindustry now belongs not to formal and corporate development institutes but to associative, initiative and complementary ones partially replacing the state as its substitutes. The authors describe the options of international financial funds and integration-type institutes’ reconstruction for Russian nanoindustry in current situation. The feasibility of orienting the construction of nanoindustry institutes to basic relationships of its subjects that ensures their relevance and effectiveness, is argued. The authors’ version of nanoindustry institutes classification is suggested for applying as a testing analyzer of institutes functioning in order to determine their reconstruction directions, identify and supplement missing links

ORGANIZATIONAL STRUCTURE FOR BUILDINGS RECONSTRUCTION OF HISTORICAL BUILDING OF ODESSA

Directory of Open Access Journals (Sweden)

POSTERNAK I. М.

2016-12-01

Full Text Available Formulation of the problem. As one of perspective forms of integration various complexes act in town-planning structure. In the course of formation of plans of social and economic development of large cities even more often there is a situation when for increase of efficiency of used resources concentration of efforts is necessary not simply, but also new progressive forms of the organization of building manufacture. Purpose. To offer the organizational structure using in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa 1820 … 1920 years under standards power efficiency and to execute researches engineering architectonics residential buildings of historical building of a city of Odessa. Conclusion. It is offered to create in the city of Odessa "the Corporate scientific and technical complex town-planning power reconstruction "CSTC T-PPR", as innovative organizational structure which uses in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa under standards power efficiency. It is considered engineering architectonics residential buildings of historical building of a city of Odessa, in particular, not looking on diverse buildings of inhabited appointment of Odessa, for them there are defining factors on which probably to make their grouping and at the same time to allocate the general lines inherent to a housing estate as a whole. It is resulted a general characteristic and classification of residential buildings of historical building of a city of Odessa ХІХ … beginnings ХХ centuries It is allocated and expanded classification of such buildings of inhabited appointment by duration of residing at them.

ORGANIZATIONAL STRUCTURE FOR RECONSTRUCTION OF BUILDINGS HISTORICAL BUILDING OF ODESSA

Directory of Open Access Journals (Sweden)

POSTERNAK I. М.

2017-05-01

Full Text Available Summary. Raising of problem. As one of perspective forms of integration various complexes act in town- planning structure. In the course of formation of plans of social and economic development of large cities even more often there is a situation when for increase of efficiency of used resources concentration of efforts is necessary not simply, but also new progressive forms of the organization of building manufacture. Purpose. To offer the organizational structure using in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa 1820 … 1920 years under standards power efficiency and to execute researches engineering architectonics residential buildings of historical building of a city of Odessa. Conclusion. It is offered to create in the city of Odessa "the Corporate scientific and technical complex town-planning power reconstruction "CSTC T-PPR", as innovative organizational structure which uses in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa under standards power efficiency. It is considered engineering architectonics residential buildings of historical building of a city of Odessa, in particular, not looking on diverse buildings of inhabited appointment of Odessa, for them there are defining factors on which probably to make their grouping and at the same time to allocate the general lines inherent to a housing estate as a whole. It is resulted a general characteristic and classification of residential buildings of historical building of a city of Odessa ХІХ beginnings ХХ centuries It is allocated and expanded classification of such buildings of inhabited appointment by duration of residing at them.

Seromuscular Colonic Flap for Intrapelvic Soft-Tissue Coverage: A Reconstructive Option for Plastic Surgeons When Traditionally Used Flaps Are Not Available

Directory of Open Access Journals (Sweden)

Johnathon Aho

2015-01-01

Full Text Available Background. Reconstruction of intrapelvic defects can be a challenging problem in patients with limited regional muscle flap options and previously resected omentum. In such situations, alternative methods of mobilizing vascularized tissue may be required. Methods. A case of a patient that underwent pelvic extirpation for recurrent rectal cancer who had limited donor sites for flap reconstruction is presented. The mucosa was removed from a blind loop of colon, and a pedicled seromuscular flap based on the colonic mesentery was placed into the pelvis for vascularized soft-tissue coverage and elimination of dead space. Results. The postoperative course was only complicated by a small subcutaneous fluid collection beneath the sacrectomy skin incision, which was drained with radiological assistance. The patient recovered without any major postoperative complications. Conclusion. Seromuscular colonic flap is a useful option for soft-tissue coverage after pelvic extirpation and should be considered by plastic surgeons when other reconstruction options are not available.

PRACTICAL SOLUTIONS FOR ECOLOGICAL RECONSTRUCTION OF GERAI POND

Directory of Open Access Journals (Sweden)

Alexandru Dimache

2012-06-01

Full Text Available Gerai Pond is one of the last natural wetlands along the Danube, being connected to natural flooding regime of the Danube and is situated at the confluence of the Danube River, between Gârcov and Islaz localities, in Olt County. Aquatic vegetation characteristic is a favorable habitat for two species of conservation concern that nest along the Danube: red duck and pygmy cormorant. During 1961-1970, Gerai Pond has changed radically due to impoundment and draining under the program of drainage and flood meadow regulate of the Danube. These works of land reclamation for decreasing surface lakes and wetlands and water stagnation period, had reduced the breeding areas of the two species mentioned above. Ecological reconstruction of Gerai Pond project was conducted by Technical University of Civil Engineering of Bucharest in collaboration with E.P.A. Olt and W.W.F.-Romania. The project was based on a hydrological study (which included a component related to flooding for the area analyzed, study in which were highlighted the areas which have water access to and from the Pond, surfaces and volumes of water corresponding to different rates, the optimal level of water for restoration of the nesting area. Based on this study were identified the areas of artificial feed-water discharge to and from the Danube. This paper presents the possible solutions for ecological reconstruction of Gerai Pond, identified in the project.

Situative Space Tracking within Smart Environments

DEFF Research Database (Denmark)

Surie, Dipak; Jäckel, Florian; Janlert, Lars-Erik

2010-01-01

This paper describes our efforts in modeling and tracking a human agent’s situation based on his/her possibilities to perceive and act upon objects (both physical and virtual) within smart environments. A Situative Space Model is proposed. WLAN signal-strength-based situative space tracking syste......-laboratory smart home environment where a global precision of 83.4% and a global recall of 88.6% were obtained.......This paper describes our efforts in modeling and tracking a human agent’s situation based on his/her possibilities to perceive and act upon objects (both physical and virtual) within smart environments. A Situative Space Model is proposed. WLAN signal-strength-based situative space tracking system...

Investigation of various reconstruction parameters for algebraic reconstruction technique in a newly developed chest digital tomosynthesis

International Nuclear Information System (INIS)

Lee, H.; Choi, S.; Kim, Y.-S.; Park, H.-S.; Seo, C.-W.; Kim, H.-J.; Lee, D.; Lee, Y.

2017-01-01

Chest digital tomosynthesis (CDT) is a promising new modality that provides 3D information by reconstructing limited projection views. CDT systems have been developed to improve the limitations of conventional radiography such as image degradation and low sensitivity. However, the development of reconstruction methods is challenging because of the limited projection views within various angular ranges. Optimization of reconstruction parameters for various reconsturction methods in CDT system also is needed. The purpose of this study was to investigate the feasibility of algebraic reconstruction technique (ART) method, and to evaluate the effect of the reconstruction parameters for our newly developed CDT system. We designed ART method with 41 projection views over an angular range of ±20°. To investigate the effect of reconstruction parameters, we measured the contrast-to-noise ratio (CNR), artifact spread function (ASF), and quality factor (QF) using LUNGMAN phantom included tumors. We found that the proper choice of reconstruction parameters such as relaxation parameter, initial guess, and number of iterations improved the quality of reconstructed images from the same projection views. Optimal values of ART relaxation parameter with uniform (UI) and back-projection (BP) initial guesses were 0.4 and 0.6, respectively. BP initial guess improved image quality in comparison with UI initial guess, in terms of providing a higher CNR and QF values with a faster speed. CNR and QF values improved with increasing number of iteration. Particularly, ART method with BP initial guess (when β = 0.6) after 3-terations provide satisfactory reconstructed image. In conclusion, the use of ART method with proper reconstruction parameters provided better image quality than FBP method as well as conventional radiography. These results indicated that the ART method with optimal reconstruction parameters could improve image quality for nodule detection using the CDT system.

Investigation of various reconstruction parameters for algebraic reconstruction technique in a newly developed chest digital tomosynthesis

Science.gov (United States)

Lee, H.; Choi, S.; Lee, D.; Kim, Y.-s.; Park, H.-S.; Lee, Y.; Seo, C.-W.; Kim, H.-J.

2017-08-01

Chest digital tomosynthesis (CDT) is a promising new modality that provides 3D information by reconstructing limited projection views. CDT systems have been developed to improve the limitations of conventional radiography such as image degradation and low sensitivity. However, the development of reconstruction methods is challenging because of the limited projection views within various angular ranges. Optimization of reconstruction parameters for various reconsturction methods in CDT system also is needed. The purpose of this study was to investigate the feasibility of algebraic reconstruction technique (ART) method, and to evaluate the effect of the reconstruction parameters for our newly developed CDT system. We designed ART method with 41 projection views over an angular range of ±20°. To investigate the effect of reconstruction parameters, we measured the contrast-to-noise ratio (CNR), artifact spread function (ASF), and quality factor (QF) using LUNGMAN phantom included tumors. We found that the proper choice of reconstruction parameters such as relaxation parameter, initial guess, and number of iterations improved the quality of reconstructed images from the same projection views. Optimal values of ART relaxation parameter with uniform (UI) and back-projection (BP) initial guesses were 0.4 and 0.6, respectively. BP initial guess improved image quality in comparison with UI initial guess, in terms of providing a higher CNR and QF values with a faster speed. CNR and QF values improved with increasing number of iteration. Particularly, ART method with BP initial guess (when β = 0.6) after 3-terations provide satisfactory reconstructed image. In conclusion, the use of ART method with proper reconstruction parameters provided better image quality than FBP method as well as conventional radiography. These results indicated that the ART method with optimal reconstruction parameters could improve image quality for nodule detection using the CDT system.

Applying Bayesian belief networks in rapid response situations

Energy Technology Data Exchange (ETDEWEB)

Gibson, William L [Los Alamos National Laboratory; Deborah, Leishman, A. [Los Alamos National Laboratory; Van Eeckhout, Edward [Los Alamos National Laboratory

2008-01-01

The authors have developed an enhanced Bayesian analysis tool called the Integrated Knowledge Engine (IKE) for monitoring and surveillance. The enhancements are suited for Rapid Response Situations where decisions must be made based on uncertain and incomplete evidence from many diverse and heterogeneous sources. The enhancements extend the probabilistic results of the traditional Bayesian analysis by (1) better quantifying uncertainty arising from model parameter uncertainty and uncertain evidence, (2) optimizing the collection of evidence to reach conclusions more quickly, and (3) allowing the analyst to determine the influence of the remaining evidence that cannot be obtained in the time allowed. These extended features give the analyst and decision maker a better comprehension of the adequacy of the acquired evidence and hence the quality of the hurried decisions. They also describe two example systems where the above features are highlighted.

Decay Process in an Active Medium. An Example

International Nuclear Information System (INIS)

Atamanuk, B.; Volokitin, A.S.

1999-01-01

In the background of many plasma phenomena are wave-wave interactions, wave-particle interactions, energy transfers, and so on. In natural and laboratory plasma, very often there are situations when a plasma is weakly unstable, that is not far above a threshold of instability. In these cases, we can describe a perturbed state in terms of a small finite number of plasma waves. In the present work, we will consider non-linear stabilization of the current instability in isothermal magnetized plasma by a three-wave decay process. This problem was studied in the many works, but some questions remain unclear, e.g. the existence and properties of chaotic regimes for certain parameters. We will consider an interesting, realistic plasma system with current instability in isothermal plasmas. To assume that only three waves are involved in the process of stabilization we have to consider instability in the conditions very close to the threshold, when only one low hybrid mode is unstable. This wave decays on two other strongly damped low hybrids waves. The dynamic stabilization of instability and swapping of energy from a radiant in area of damping (heat of plasma) thus happens. This example shows a common situation and that represents practical interest at the analysis of natural processes in ionosphere. (author)

Occupational safety in the nuclear power plant. The contribution of sociology to the development of a communication tool for the elimination of hazardous situations

International Nuclear Information System (INIS)

Zedler, Christien; Huber, Veit

2012-01-01

Nuclear power plant companies make efforts to enhance the operational safety in the plant. Despite a variety of measures the number of accidents at work is still too high, esp. for external personnel. Social psychological considerations were used to develop communication tools for the elimination of hazardous situations, for instance by safety dialogues between employees. The observation of hazardous situations should trigger communication and discussion on the risk of the specific situation. In the contribution practical experiences and recommendations for the realization of a safety dialogue culture in the NPP Grafenrheinfeld are summarized and illustrated by examples.

Higher order solution of the Euler equations on unstructured grids using quadratic reconstruction

Science.gov (United States)

Barth, Timothy J.; Frederickson, Paul O.

1990-01-01

High order accurate finite-volume schemes for solving the Euler equations of gasdynamics are developed. Central to the development of these methods are the construction of a k-exact reconstruction operator given cell-averaged quantities and the use of high order flux quadrature formulas. General polygonal control volumes (with curved boundary edges) are considered. The formulations presented make no explicit assumption as to complexity or convexity of control volumes. Numerical examples are presented for Ringleb flow to validate the methodology.

Reconstruction of Sound Source Pressures in an Enclosure Using the Phased Beam Tracing Method

DEFF Research Database (Denmark)

Jeong, Cheol-Ho; Ih, Jeong-Guon

2009-01-01

. First, surfaces of an extended source are divided into reasonably small segments. From each source segment, one beam is projected into the field and all emitted beams are traced. Radiated beams from the source reach array sensors after traveling various paths including the wall reflections. Collecting...... all the pressure histories at the field points, source-observer relations can be constructed in a matrix-vector form for each frequency. By multiplying the measured field data with the pseudo-inverse of the calculated transfer function, one obtains the distribution of source pressure. An omni......-directional sphere and a cubic source in a rectangular enclosure were taken as examples in the simulation tests. A reconstruction error was investigated by Monte Carlo simulation in terms of field point locations. When the source information was reconstructed by the present method, it was shown that the sound power...

Example book

International Nuclear Information System (INIS)

Donnat, Ph.; Treimany, C.; Gouedard, C.; Morice, O.

1998-06-01

This document presents some examples which were used for debugging the code. It seemed useful to write these examples onto a book to be sure the code would not regret; to give warranties for the code's functionality; to propose some examples to illustrate the possibilities and the limits of Miro. (author)

Reconstruction of the building history of the Demidovs’ estate “Almazovo” situated near Moscow

Directory of Open Access Journals (Sweden)

Aksenova Irina Vasil’evna

2014-03-01

Full Text Available The currency of the topic covered in the article is not only the necessity of national cultural traditions revival, but also the possibility of applying the restored historical objects in modern life as multifunctional cultural and touristic complexes. At present, this is one of the most prospective tendencies in tourism, entertainment industry and educational programmes. The revival of historical estates and cultural traditions is nowadays insufficiently used but inexhaustible source for economical and cultural development of Russian regions. Attracting investments allow preserving ancient buildings in future. The Demidovs’ estate “Sergievskaya dacha” in Almazovo (belonged to the Demidovs, the Ural owners of mines and metallurgical works is an object of historic and cultural interest of Federal significance and it is of great scientific, educational and architectural value. To date the published information about the estate is laconic and sometimes contradictive. The results of historic and architectural researches based upon detailed study of literary materials and especially archives are offered in the article. All building stages of the estate are considered. Unique unpublished drafts of demolished and not erected (because of a disease of the owner buildings and elements of landscape architecture, which form an entity of the whole complex, have been discovered by the author. The scientific importance of researches carried out by the author consists of the possibility (to the great degree of trustworthiness to reconstruct the building history of the whole estate complex. The volume of the obtained information allows to speak of the possibility of the estate restoration and to work out the project for its new contemporary usage as a museum of the noble family way of life. This will encourage the development of tourism in the region and draw the attraction of investments in order to preserve the estate.

Entropy and transverse section reconstruction

International Nuclear Information System (INIS)

Gullberg, G.T.

1976-01-01

A new approach to the reconstruction of a transverse section using projection data from multiple views incorporates the concept of maximum entropy. The principle of maximizing information entropy embodies the assurance of minimizing bias or prejudice in the reconstruction. Using maximum entropy is a necessary condition for the reconstructed image. This entropy criterion is most appropriate for 3-D reconstruction of objects from projections where the system is underdetermined or the data are limited statistically. This is the case in nuclear medicine time limitations in patient studies do not yield sufficient projections

Breast reconstruction - natural tissue

Science.gov (United States)

... flap; TRAM; Latissimus muscle flap with a breast implant; DIEP flap; DIEAP flap; Gluteal free flap; Transverse upper gracilis flap; TUG; Mastectomy - breast reconstruction with natural tissue; Breast cancer - breast reconstruction with natural tissue

The mandibular symphysis as a starting point for the occlusal-level reconstruction of panfacial fractures with bicondylar fractures and interruption of the maxillary and mandibular arches: report of two cases.

Science.gov (United States)

Pau, Mauro; Reinbacher, Knut Ernst; Feichtinger, Matthias; Navysany, Kawe; Kärcher, Hans

2014-06-01

Panfacial fractures represent a challenge, even for experienced maxillofacial surgeons, because all references for reconstructing the facial skeleton are missing. Logical reconstructive sequencing based on a clear understanding of the correlation between projection and the widths and lengths of facial subunits should enable the surgeon to achieve correct realignment of the bony framework of the face and to prevent late deformity and functional impairment. Reconstruction is particularly challenging in patients presenting with concomitant fractures at the Le Fort I level and affecting the palate, condyles, and mandibular symphysis. In cases without bony loss and sufficient dentition, we believe that accurate fixation of the mandibular symphysis can represent the starting point of a reconstructive sequence that allows successful reconstruction at the Le Fort I level. Two patients were treated in our department by reconstruction starting in the occlusal area through repair of the mandibular symphysis. Both patients considered the postoperative facial shape and profile to be satisfactory and comparable to the pre-injury situation. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

A Situational Maintenance Model

DEFF Research Database (Denmark)

Luxhoj, James T.; Thorsteinsson, Uffe; Riis, Jens Ove

1997-01-01

An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance.......An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance....

Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

Science.gov (United States)

Grzonka, Aleksandra

2015-12-01

Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.

Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

Directory of Open Access Journals (Sweden)

Grzonka Aleksandra

2015-12-01

Full Text Available Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.

Approaches to qualitative research in mathematics education examples of methodology and methods

CERN Document Server

Bikner-Ahsbahs, Angelika; Presmeg, Norma

2014-01-01

This volume documents a range of qualitative research approaches emerged within mathematics education over the last three decades, whilst at the same time revealing their underlying methodologies. Continuing the discussion as begun in the two 2003 ZDM issues dedicated to qualitative empirical methods, this book presents astate of the art overview on qualitative research in mathematics education and beyond. The structure of the book allows the reader to use it as an actual guide for the selection of an appropriate methodology, on a basis of both theoretical depth and practical implications. The methods and examples illustrate how different methodologies come to life when applied to a specific question in a specific context. Many of the methodologies described are also applicable outside mathematics education, but the examples provided are chosen so as to situate the approach in a mathematical context.

BREAST RECONSTRUCTIONS AFTER BREAST CANCER TREATING

Directory of Open Access Journals (Sweden)

Erik Vrabič

2018-02-01

Full Text Available Background. Breasts are an important symbol of physical beauty, feminity, mothering and sexual desire through the entire history of mankind. Lost of the whole or part of the breast is functional and aesthetic disturbance for woman. It is understandable, that the woman, who is concerned over breast loss, is as appropriate as another person´s concern over the loss of a limb or other body part. Before the 1960, breast reconstruction was considered as a dangerous procedure and it was almost prohibited. Considering the psychological importance of the breast in modern society, the possibility of breast reconstruction for the woman about to undergo a mastectomy is a comforting alternative. We can perform breast reconstruction with autologous tissue (autologous reconstruction, with breast implants and combination of both methods. For autologous reconstruction we can use local tissue (local flaps, or tissue from distant parts of the body (free vascular tissue transfer. Tissue expansion must be performed first, in many cases of breast reconstructions with breast implants. Conclusions. Possibility of breast reconstruction made a big progress last 3 decades. Today we are able to reconstruct almost every defect of the breast and the entire breast. Breast reconstruction rise the quality of life for breast cancer patients. Breast reconstruction is a team work of experts from many medicine specialites. In Slovenia we can offer breast reconstruction for breast cancer patients in Ljubljana, where plastic surgeons from Clinical Department for Plastic Surgery and Burns cooperate with oncologic surgeons. Ten years ago a similar cooperation between plastic surgeons and surgeons of the Centre for Breast Diseases was established in Maribor.

Reconstruction of a ring applicator using CT imaging: impact of the reconstruction method and applicator orientation

International Nuclear Information System (INIS)

Hellebust, Taran Paulsen; Tanderup, Kari; Bergstrand, Eva Stabell; Knutsen, Bjoern Helge; Roeislien, Jo; Olsen, Dag Rune

2007-01-01

The purpose of this study is to investigate whether the method of applicator reconstruction and/or the applicator orientation influence the dose calculation to points around the applicator for brachytherapy of cervical cancer with CT-based treatment planning. A phantom, containing a fixed ring applicator set and six lead pellets representing dose points, was used. The phantom was CT scanned with the ring applicator at four different angles related to the image plane. In each scan the applicator was reconstructed by three methods: (1) direct reconstruction in each image (DR) (2) reconstruction in multiplanar reconstructed images (MPR) and (3) library plans, using pre-defined applicator geometry (LIB). The doses to the lead pellets were calculated. The relative standard deviation (SD) for all reconstruction methods was less than 3.7% in the dose points. The relative SD for the LIB method was significantly lower (p < 0.05) than for the DR and MPR methods for all but two points. All applicator orientations had similar dose calculation reproducibility. Using library plans for applicator reconstruction gives the most reproducible dose calculation. However, with restrictive guidelines for applicator reconstruction the uncertainties for all methods are low compared to other factors influencing the accuracy of brachytherapy

Autologous Cricoid Cartilage as a Graft for Airway Reconstruction in an Emergent Technique - A Case Report

Directory of Open Access Journals (Sweden)

Farzad Izadi

2016-03-01

Full Text Available Introduction: Laryngotracheal stenosis can be caused after traumatic injuries to the neck from the subglottic larynx to the trachea. Patients with laryngotracheal stenosis often need a tracheotomy and occasionally may become tracheotomy dependent. Different procedures have been described for the management of these lesions. Management options include techniques of endoscopic dilation, laser resection, laryngo-fissure, and an innovative array of plastic reconstructions with or without the use of stents.   Case Report:This paper presents airway reconstruction in a young patient with severe subglottic stenosis due to a blunt trauma to the neck, who was treated using particles of an autologous fractured cricoid cartilage as the source for airway augmentation. An incision was made in the anterior midline of the cricoid lamina and deepened through the scar tissue to the posterior cricoid lamina. Then two lateral incisions (right & left were made in the cricoid lamina and fractured cartilage particles and the scar tissue were removed via these two lateral incisions. The mucosal lining at the right and left of the midline incision, after debulking, were sutured to a lateral position. Thereafter three cartilage particles were used to reconstruct the anterior cricoid lamina and augment the lumen.   Conclusion:  It is worth to mention that an autologus cartilage graft can be used for certain cases with traumatic airway stenosis. Further follow up and more patients are needed to approve this method of reconstructive surgery in emergent situations.

Delayed vaginal reconstruction in the fibrotic pelvis following radiation or previous reconstruction

International Nuclear Information System (INIS)

Berek, J.S.; Hacker, N.F.; Lagasse, L.D.; Smith, M.L.

1983-01-01

Vaginal reconstruction was performed in 14 patients who had developed vaginal stenosis secondary to extensive pelvic fibrosis after pelvic radiation therapy (12 patients) or prior vaginal reconstruction (2 patients). Sixteen procedures were performed using a split-thickness skin graft. All patients had satisfactory vaginal restoration, and 12 patients reported good vaginal function. No fistula developed as a result of the operative procedure, but one patient later developed a rectovaginal fistula resulting from tumor recurrence. Successful vaginal reconstruction can be achieved even years after initial therapy in patients who develop an obliterated vagina from previous radiation or surgery

Breast reconstruction following mastectomy: current status in Australia.

Science.gov (United States)

Sandelin, Kerstin; King, Elizabeth; Redman, Sally

2003-09-01

Although breast reconstruction provides some advantages for women following mastectomy, few Australian breast cancer patients currently receive reconstruction. In Australia, the routine provision of breast reconstruction will require the development of specific health service delivery models. The present paper reports an analysis of the provision of breast reconstruction in eight sites in Australia. A semi-structured telephone interview was conducted with 10 surgeons offering breast reconstruction as part of their practice, including nine breast or general surgeons and one plastic surgeon. Surgeons reported offering breast reconstruction to all women facing mastectomy; the proportion of women deciding to have breast reconstruction varied between sites with up to 50% of women having a reconstruction at some sites. Most sites offered three types of reconstruction. Two pathways emerged: either the breast surgeon performed the breast surgery in a team with the plastic surgeon who undertook the breast reconstruction or the breast surgeon provided both the breast surgery and the reconstruction. Considerable waiting times for breast reconstruction were reported in the public sector particularly for delayed reconstruction. Surgeons reported receiving training in breast reconstruction from plastic surgeons or from a breast surgery team that performed reconstructions; a number had been trained overseas. No audits of breast reconstruction were being undertaken. Breast reconstruction can be offered on a routine basis in Australia in both the private and public sectors. Women may be more readily able to access breast reconstruction when it is provided by a breast surgeon alone, but the range of reconstruction options may be more limited. If access to breast reconstruction is to be increased, there will be a need to: (i) develop effective models for the rural sector taking account of the lack of plastic surgeons; (ii) address waiting times for reconstruction surgery in the

Reconstruction of baseline time-trace under changing environmental and operational conditions

International Nuclear Information System (INIS)

Aryan, P; Kotousov, A; Ng, C T; Wildy, S

2016-01-01

Compensation of changing environmental and operational conditions (EOC) is often necessary when using guided-wave based techniques for structural health monitoring in real-world applications. Many studies have demonstrated that the effect of changing EOC can mask damage to a degree that a critical defect might not be detected. Several effective strategies, specifically for compensating the temperature variations, have been developed in recent years. However, many other factors, such as changing humidity and boundary conditions or degradation of material properties, have not received much attention. This paper describes a practical method for reconstruction of the baseline time-trace corresponding to the current EOC. Thus, there is no need for differentiation or compensation procedures when using this method for damage diagnosis. It is based on 3D surface measurements of the velocity field near the actuator using laser vibrometry, in conjunction with high-fidelity finite element simulations of guided wave propagation in free from defects structure. To demonstrate the feasibility and efficiency of the proposed method we provide several examples of the reconstruction and damage detection. (paper)

Reconstruction of baseline time-trace under changing environmental and operational conditions

Science.gov (United States)

Aryan, P.; Kotousov, A.; Ng, C. T.; Wildy, S.

2016-03-01

Compensation of changing environmental and operational conditions (EOC) is often necessary when using guided-wave based techniques for structural health monitoring in real-world applications. Many studies have demonstrated that the effect of changing EOC can mask damage to a degree that a critical defect might not be detected. Several effective strategies, specifically for compensating the temperature variations, have been developed in recent years. However, many other factors, such as changing humidity and boundary conditions or degradation of material properties, have not received much attention. This paper describes a practical method for reconstruction of the baseline time-trace corresponding to the current EOC. Thus, there is no need for differentiation or compensation procedures when using this method for damage diagnosis. It is based on 3D surface measurements of the velocity field near the actuator using laser vibrometry, in conjunction with high-fidelity finite element simulations of guided wave propagation in free from defects structure. To demonstrate the feasibility and efficiency of the proposed method we provide several examples of the reconstruction and damage detection.

EEG/MEG Source Reconstruction with Spatial-Temporal Two-Way Regularized Regression

KAUST Repository

Tian, Tian Siva

2013-07-11

In this work, we propose a spatial-temporal two-way regularized regression method for reconstructing neural source signals from EEG/MEG time course measurements. The proposed method estimates the dipole locations and amplitudes simultaneously through minimizing a single penalized least squares criterion. The novelty of our methodology is the simultaneous consideration of three desirable properties of the reconstructed source signals, that is, spatial focality, spatial smoothness, and temporal smoothness. The desirable properties are achieved by using three separate penalty functions in the penalized regression framework. Specifically, we impose a roughness penalty in the temporal domain for temporal smoothness, and a sparsity-inducing penalty and a graph Laplacian penalty in the spatial domain for spatial focality and smoothness. We develop a computational efficient multilevel block coordinate descent algorithm to implement the method. Using a simulation study with several settings of different spatial complexity and two real MEG examples, we show that the proposed method outperforms existing methods that use only a subset of the three penalty functions. © 2013 Springer Science+Business Media New York.

Petz recovery versus matrix reconstruction

Science.gov (United States)

Holzäpfel, Milan; Cramer, Marcus; Datta, Nilanjana; Plenio, Martin B.

2018-04-01

The reconstruction of the state of a multipartite quantum mechanical system represents a fundamental task in quantum information science. At its most basic, it concerns a state of a bipartite quantum system whose subsystems are subjected to local operations. We compare two different methods for obtaining the original state from the state resulting from the action of these operations. The first method involves quantum operations called Petz recovery maps, acting locally on the two subsystems. The second method is called matrix (or state) reconstruction and involves local, linear maps that are not necessarily completely positive. Moreover, we compare the quantities on which the maps employed in the two methods depend. We show that any state that admits Petz recovery also admits state reconstruction. However, the latter is successful for a strictly larger set of states. We also compare these methods in the context of a finite spin chain. Here, the state of a finite spin chain is reconstructed from the reduced states of a few neighbouring spins. In this setting, state reconstruction is the same as the matrix product operator reconstruction proposed by Baumgratz et al. [Phys. Rev. Lett. 111, 020401 (2013)]. Finally, we generalize both these methods so that they employ long-range measurements instead of relying solely on short-range correlations embodied in such local reduced states. Long-range measurements enable the reconstruction of states which cannot be reconstructed from measurements of local few-body observables alone and hereby we improve existing methods for quantum state tomography of quantum many-body systems.

The feasibility of images reconstructed with the method of sieves

International Nuclear Information System (INIS)

Veklerov, E.; Llacer, J.

1990-01-01

The concept of sieves has been applied with the maximum likelihood estimator (MLE) to image reconstruction. While it makes it possible to recover smooth images consistent with the data, the degree of smoothness provided by it is arbitrary. It is shown that the concept of feasibility is able to resolve this arbitrariness. By varying the values of parameters determining the degree of smoothness, one can generate images on both sides of the feasibility region, as well as within the region. Feasible images recovered by using different sieve parameters are compared with feasible results of other procedures. One- and two-dimensional examples using both simulated and real data sets are considered

Laterally situated sinus pericranii

International Nuclear Information System (INIS)

Koshu, K.; Takahashi, S.

1981-01-01

Sinus pericranii has been reported to be situated usually along the midline. Two cases of laterally situated sinus pericranii are presented. Venous blood was obtained by puncturing the tumors directly. Injection of contrast medium into the tumors demonstrated a communication between the tumors and the intracranial venous sinuses through marked diploic veins. (orig.)

All in a day's work – variability in person-situation interactions in daily life situations

DEFF Research Database (Denmark)

Jensen, Lasse Meinert

effect of persons’ situational concerns and intentions upon fluctuations in quality of experience. This paper will argue that the combination of findings (a) and (b) goes against the interpretation that persons merely “react” to situational features, and instead points to how subjective and agentic...... features of the person shape experience by way of guiding the person’s interaction with the situations of everyday life....

Breast Reconstruction After Solid Organ Transplant.

Science.gov (United States)

Koonce, Stephanie L; Giles, Brian; McLaughlin, Sarah A; Perdikis, Galen; Waldorf, James; Lemaine, Valerie; TerKonda, Sarvam

2015-09-01

Solid organ transplant patients frequently develop posttransplant malignancies including breast cancer. They may desire breast reconstruction after mastectomy, which could potentially be complicated by their transplant status, immunosuppressive regimen, and previous operations. We review our experience with patients who have undergone solid organ transplant and subsequent breast reconstruction after mastectomy After institutional review board approval, we queried our prospective breast reconstruction and solid organ transplant databases for corresponding patients. Inclusion criteria comprised breast reconstruction after solid organ transplant. A chart review was conducted of identified patients. Seventeen patients were identified: 1 pulmonary transplant, 4 cardiac transplants, 2 liver transplants, 1 pancreas transplant, 2 combined kidney/pancreas transplants, and 7 kidney transplants. Indications for mastectomy included posttransplant malignancy and prophylaxis. Median time from transplant to completion of reconstruction was 186 months (range, 11-336 months). Median age at transplant was 34.5 years (range, 21-65 years) with the median age of the patients at reconstructive surgery 51.5 years (range, 34-71 years). Median body mass index was 25.3 (range, 21.3-46.5). No significant complications were noted after reconstructive surgery. All patients were on full immunosuppression at time of reconstruction. Breast reconstruction is a viable option for transplant patients after mastectomy and should not be refused based on their transplant status. Close coordination with the transplant team and careful preoperative planning is essential for optimal outcomes.

Ekofisk chalk: core measurements, stochastic reconstruction, network modeling and simulation

Energy Technology Data Exchange (ETDEWEB)

Talukdar, Saifullah

2002-07-01

This dissertation deals with (1) experimental measurements on petrophysical, reservoir engineering and morphological properties of Ekofisk chalk, (2) numerical simulation of core flood experiments to analyze and improve relative permeability data, (3) stochastic reconstruction of chalk samples from limited morphological information, (4) extraction of pore space parameters from the reconstructed samples, development of network model using pore space information, and computation of petrophysical and reservoir engineering properties from network model, and (5) development of 2D and 3D idealized fractured reservoir models and verification of the applicability of several widely used conventional up scaling techniques in fractured reservoir simulation. Experiments have been conducted on eight Ekofisk chalk samples and porosity, absolute permeability, formation factor, and oil-water relative permeability, capillary pressure and resistivity index are measured at laboratory conditions. Mercury porosimetry data and backscatter scanning electron microscope images have also been acquired for the samples. A numerical simulation technique involving history matching of the production profiles is employed to improve the relative permeability curves and to analyze hysteresis of the Ekofisk chalk samples. The technique was found to be a powerful tool to supplement the uncertainties in experimental measurements. Porosity and correlation statistics obtained from backscatter scanning electron microscope images are used to reconstruct microstructures of chalk and particulate media. The reconstruction technique involves a simulated annealing algorithm, which can be constrained by an arbitrary number of morphological parameters. This flexibility of the algorithm is exploited to successfully reconstruct particulate media and chalk samples using more than one correlation functions. A technique based on conditional simulated annealing has been introduced for exact reproduction of vuggy

Reconstructing exposures from biomarkers using exposure-pharmacokinetic modeling--A case study with carbaryl.

Science.gov (United States)

Brown, Kathleen; Phillips, Martin; Grulke, Christopher; Yoon, Miyoung; Young, Bruce; McDougall, Robin; Leonard, Jeremy; Lu, Jingtao; Lefew, William; Tan, Yu-Mei

2015-12-01

Sources of uncertainty involved in exposure reconstruction for short half-life chemicals were characterized using computational models that link external exposures to biomarkers. Using carbaryl as an example, an exposure model, the Cumulative and Aggregate Risk Evaluation System (CARES), was used to generate time-concentration profiles for 500 virtual individuals exposed to carbaryl. These exposure profiles were used as inputs into a physiologically based pharmacokinetic (PBPK) model to predict urinary biomarker concentrations. These matching dietary intake levels and biomarker concentrations were used to (1) compare three reverse dosimetry approaches based on their ability to predict the central tendency of the intake dose distribution; and (2) identify parameters necessary for a more accurate exposure reconstruction. This study illustrates the trade-offs between using non-iterative reverse dosimetry methods that are fast, less precise and iterative methods that are slow, more precise. This study also intimates the necessity of including urine flow rate and elapsed time between last dose and urine sampling as part of the biomarker sampling collection for better interpretation of urinary biomarker data of short biological half-life chemicals. Resolution of these critical data gaps can allow exposure reconstruction methods to better predict population-level intake doses from large biomonitoring studies. Published by Elsevier Inc.

Prosthetic breast reconstruction: indications and update

Science.gov (United States)

Quinn, Tam T.; Miller, George S.; Rostek, Marie; Cabalag, Miguel S.; Rozen, Warren M.

2016-01-01

Background Despite 82% of patients reporting psychosocial improvement following breast reconstruction, only 33% patients choose to undergo surgery. Implant reconstruction outnumbers autologous reconstruction in many centres. Methods A systematic review of the literature was undertaken. Inclusion required: (I) Meta-analyses or review articles; (II) adult patients aged 18 years or over undergoing alloplastic breast reconstruction; (III) studies including outcome measures; (IV) case series with more than 10 patients; (V) English language; and (VI) publication after 1st January, 2000. Results After full text review, analysis and data extraction was conducted for a total of 63 articles. Definitive reconstruction with an implant can be immediate or delayed. Older patients have similar or even lower complication rates to younger patients. Complications include capsular contracture, hematoma and infection. Obesity, smoking, large breasts, diabetes and higher grade tumors are associated with increased risk of wound problems and reconstructive failure. Silicone implant patients have higher capsular contracture rates but have higher physical and psychosocial function. There were no associations made between silicone implants and cancer or systemic disease. There were no differences in outcomes or complications between round and shaped implants. Textured implants have a lower risk of capsular contracture than smooth implants. Smooth implants are more likely to be displaced as well as having higher rates of infection. Immediate breast reconstruction (IBR) gives the best aesthetic outcome if radiotherapy is not required but has a higher rate of capsular contracture and implant failure. Delayed-immediate reconstruction patients can achieve similar aesthetic results to IBR whilst preserving the breast skin if radiotherapy is required. Delayed breast reconstruction (DBR) patients have fewer complications than IBR patients. Conclusions Implant reconstruction is a safe and popular

SEGEBERG 1600 – RECONSTRUCTING A HISTORIC TOWN FOR VIRTUAL REALITY VISUALISATION AS AN IMMERSIVE EXPERIENCE

Directory of Open Access Journals (Sweden)

S. Deggim

2017-11-01

Full Text Available The 3D reconstruction of historic buildings and cities offers an opportunity to experience the history of relevant objects and their development over the centuries. Digital visualisations of such historic objects allow for a more natural view of history as well as showing information that is not possible in a real world setting. New presentation forms, such as the virtual reality (VR system HTC Vive, can be used to disseminate information in another dimension and simplify the access by changing the user’s viewpoint from a listener and viewer into being an integrated part of an interactive situation. In general, this approach is a combination of education and entertainment, also known as “edutainment” or “gamification”, a term used in the education sector as describing where motivation to learn is encouraged through adding a competitive element. It is thus a step away from simple consumption of information towards experiencing information and a more literal interpretation of “living history”. In this contribution, we present the development of a 3D reconstruction of the two towns Segeberg and Gieschenhagen (today: Bad Segeberg in Schleswig-Holstein, Germany in the Early Modern Age around 1600. The historic landscape and its conversion from a reconstructed virtual town model into an interactive VR application is also described. The reconstruction is based on a recent digital terrain model as well as survey data of surviving buildings, historic visual information based on historic drawings and written accounts from that era. All datasets are combined to a single walkable virtual world that spans approximately 3 km².

Reconstruction of measurable three-dimensional point cloud model based on large-scene archaeological excavation sites

Science.gov (United States)

Zhang, Chun-Sen; Zhang, Meng-Meng; Zhang, Wei-Xing

2017-01-01

This paper outlines a low-cost, user-friendly photogrammetric technique with nonmetric cameras to obtain excavation site digital sequence images, based on photogrammetry and computer vision. Digital camera calibration, automatic aerial triangulation, image feature extraction, image sequence matching, and dense digital differential rectification are used, combined with a certain number of global control points of the excavation site, to reconstruct the high precision of measured three-dimensional (3-D) models. Using the acrobatic figurines in the Qin Shi Huang mausoleum excavation as an example, our method solves the problems of little base-to-height ratio, high inclination, unstable altitudes, and significant ground elevation changes affecting image matching. Compared to 3-D laser scanning, the 3-D color point cloud obtained by this method can maintain the same visual result and has advantages of low project cost, simple data processing, and high accuracy. Structure-from-motion (SfM) is often used to reconstruct 3-D models of large scenes and has lower accuracy if it is a reconstructed 3-D model of a small scene at close range. Results indicate that this method quickly achieves 3-D reconstruction of large archaeological sites and produces heritage site distribution of orthophotos providing a scientific basis for accurate location of cultural relics, archaeological excavations, investigation, and site protection planning. This proposed method has a comprehensive application value.

Right adrenal vein: comparison between adaptive statistical iterative reconstruction and model-based iterative reconstruction.

Science.gov (United States)

Noda, Y; Goshima, S; Nagata, S; Miyoshi, T; Kawada, H; Kawai, N; Tanahashi, Y; Matsuo, M

2018-06-01

To compare right adrenal vein (RAV) visualisation and contrast enhancement degree on adrenal venous phase images reconstructed using adaptive statistical iterative reconstruction (ASiR) and model-based iterative reconstruction (MBIR) techniques. This prospective study was approved by the institutional review board, and written informed consent was waived. Fifty-seven consecutive patients who underwent adrenal venous phase imaging were enrolled. The same raw data were reconstructed using ASiR 40% and MBIR. The expert and beginner independently reviewed computed tomography (CT) images. RAV visualisation rates, background noise, and CT attenuation of the RAV, right adrenal gland, inferior vena cava (IVC), hepatic vein, and bilateral renal veins were compared between the two reconstruction techniques. RAV visualisation rates were higher with MBIR than with ASiR (95% versus 88%, p=0.13 in expert and 93% versus 75%, p=0.002 in beginner, respectively). RAV visualisation confidence ratings with MBIR were significantly greater than with ASiR (pASiR (pASiR (p=0.0013 and 0.02). Reconstruction of adrenal venous phase images using MBIR significantly reduces background noise, leading to an improvement in the RAV visualisation compared with ASiR. Copyright © 2018 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

It Takes More Than Two To TANGO: Co-Constructing Situated Accountability Through a Local E-Government Arena

Directory of Open Access Journals (Sweden)

Annelie Ekelin

2004-04-01

Full Text Available This paper deals with the issue of shaping local egovernment policies and practices, by including several actors, such as researchers, official authorities, politicians and software companies as well as ordinary citizens in a joint, sustainable development of a region. One way to provide space and place for this ongoing coconstruction and negotiation work of situated egovernment is the establishment of a regional center of competence on e-government, within a program, partly funded by the European Commission, called Innovative Actions. TANGO (Thematic Arenas Nourish Growth Opportunities is a way to build thematic competence centres and stimulate local research- and development projects (R&D, carried out in co-operation with partners from local business life. The Come on in- project, described in this paper, is an example of such an R&D project. The practices reveal several critical and crucial negotiation situations that are of importance to be put forward and be discussed in relation to what situated accountability could mean for the development of what could be called a new politics production. Situated accountability is therefore of great significance for this discussion.

Vector tomography for reconstructing electric fields with non-zero divergence in bounded domains

Energy Technology Data Exchange (ETDEWEB)

Koulouri, Alexandra, E-mail: koulouri@uni-muenster.de [Institute for Computational and Applied Mathematics, University of Münster, Einsteinstrasse 62, D-48149 Münster (Germany); Department of Electrical and Electronic Engineering, Imperial College London, Exhibition Road, London SW7 2BT (United Kingdom); Brookes, Mike [Department of Electrical and Electronic Engineering, Imperial College London, Exhibition Road, London SW7 2BT (United Kingdom); Rimpiläinen, Ville [Institute for Biomagnetism and Biosignalanalysis, University of Münster, Malmedyweg 15, D-48149 Münster (Germany); Department of Mathematics, University of Auckland, Private bag 92019, Auckland 1142 (New Zealand)

2017-01-15

In vector tomography (VT), the aim is to reconstruct an unknown multi-dimensional vector field using line integral data. In the case of a 2-dimensional VT, two types of line integral data are usually required. These data correspond to integration of the parallel and perpendicular projection of the vector field along the integration lines and are called the longitudinal and transverse measurements, respectively. In most cases, however, the transverse measurements cannot be physically acquired. Therefore, the VT methods are typically used to reconstruct divergence-free (or source-free) velocity and flow fields that can be reconstructed solely from the longitudinal measurements. In this paper, we show how vector fields with non-zero divergence in a bounded domain can also be reconstructed from the longitudinal measurements without the need of explicitly evaluating the transverse measurements. To the best of our knowledge, VT has not previously been used for this purpose. In particular, we study low-frequency, time-harmonic electric fields generated by dipole sources in convex bounded domains which arise, for example, in electroencephalography (EEG) source imaging. We explain in detail the theoretical background, the derivation of the electric field inverse problem and the numerical approximation of the line integrals. We show that fields with non-zero divergence can be reconstructed from the longitudinal measurements with the help of two sparsity constraints that are constructed from the transverse measurements and the vector Laplace operator. As a comparison to EEG source imaging, we note that VT does not require mathematical modeling of the sources. By numerical simulations, we show that the pattern of the electric field can be correctly estimated using VT and the location of the source activity can be determined accurately from the reconstructed magnitudes of the field. - Highlights: • Vector tomography is used to reconstruct electric fields generated by dipole

Point-source reconstruction with a sparse light-sensor array for optical TPC readout

International Nuclear Information System (INIS)

Rutter, G; Richards, M; Bennieston, A J; Ramachers, Y A

2011-01-01

A reconstruction technique for sparse array optical signal readout is introduced and applied to the generic challenge of large-area readout of a large number of point light sources. This challenge finds a prominent example in future, large volume neutrino detector studies based on liquid argon. It is concluded that the sparse array option may be ruled out for reasons of required number of channels when compared to a benchmark derived from charge readout on wire-planes. Smaller-scale detectors, however, could benefit from this technology.

Reconstructing ancient river dynamics from the stratigraphic record: can lessons from the past inform our future?

Science.gov (United States)

Hajek, E. A.; Chamberlin, E.; Baisden, T.

2014-12-01

The richness of the deep-time record and its potential for revealing important characteristics of ancient fluvial landscapes has been demonstrated time and again, including compelling examples of rivers altering their behavior in response to changes in vegetation patterns or abrupt shifts in water and sediment discharge. At present, reconstructions of ancient river and floodplain dynamics are commonly qualitative, and when quantitative metrics are used, it is often for comparison among ancient deposits. Without being able to reconstruct, more comprehensively, important aspects of ancient river and floodplains dynamics, this information has only anecdotal relevance for evaluating and managing present-day landscapes. While methods for reconstructing hydrodynamic and morphodynamic aspects of ancient rivers and floodplains are useful, uncertainties associated with these snapshots complicate the ability to translate observations from geologic to engineering scales, thereby limiting the utility of insight from Earth's past in decision-making and development of sustainable landscape-management practices for modern fluvial landscapes. Here, we explore the degree to which paleomorphodynamic reconstructions from ancient channel and floodplain deposits can be used to make specific, quantitative inferences about ancient river dynamics. We compare a suite of paleoenvironmental measurements from a variety of ancient fluvial deposits (including reconstructions of paleoflow depth, paleoslope, paleo-channel mobility, the caliber of paleo-sediment load, and paleo-floodplain heterogeneity) in an effort to evaluate sampling and empirical uncertainties associated with these methods and identify promising avenues for developing more detailed landscape reconstructions. This work is aimed at helping to develop strategies for extracting practicable information from the stratigraphic record that is relevant for sustainably managing and predicting changes in today's environments.

Algorithmic procedures for Bayesian MEG/EEG source reconstruction in SPM.

Science.gov (United States)

López, J D; Litvak, V; Espinosa, J J; Friston, K; Barnes, G R

2014-01-01

The MEG/EEG inverse problem is ill-posed, giving different source reconstructions depending on the initial assumption sets. Parametric Empirical Bayes allows one to implement most popular MEG/EEG inversion schemes (Minimum Norm, LORETA, etc.) within the same generic Bayesian framework. It also provides a cost-function in terms of the variational Free energy-an approximation to the marginal likelihood or evidence of the solution. In this manuscript, we revisit the algorithm for MEG/EEG source reconstruction with a view to providing a didactic and practical guide. The aim is to promote and help standardise the development and consolidation of other schemes within the same framework. We describe the implementation in the Statistical Parametric Mapping (SPM) software package, carefully explaining each of its stages with the help of a simple simulated data example. We focus on the Multiple Sparse Priors (MSP) model, which we compare with the well-known Minimum Norm and LORETA models, using the negative variational Free energy for model comparison. The manuscript is accompanied by Matlab scripts to allow the reader to test and explore the underlying algorithm. © 2013. Published by Elsevier Inc. All rights reserved.

Probabilistic reconstruction of internal exposure for nuclear power plant workers using air concentration measurements

International Nuclear Information System (INIS)

Linkov, I.; Burmistrov, D.

2000-01-01

Air surveys, whole-body counting, bioassays or combination of these measurements can be utilized for purposes or assessing internal doses to determine compliance with occupational dose equivalent limits. Air sampling with a little support provided by whole body counting and/or bioassays was often relied on in dose calculations. The utility of air sampling for internal dose reconstruction is addressed in this paper through the probabilistic analysis of environmental factors and their impact on dose estimates. In this paper we attempt to reconstruct an internal dose due to inhalation of beta + gamma emitting radionuclides for a contractual electrician, Mr. X. The data available for reconstruction of internal dose for Mr. X was found to be highly variable and uncertain. Uncertainty describes a lack of knowledge about a parameter, this lack of knowledge theoretically can be reduced, e.g., if more measurements were to be taken (for example, estimated activities for alpha-emitting radionuclides are uncertain due to the influence of naturally-occurring alpha-emitters). Variability describes the existence of different values that represent different environmental conditions (for example, the air concentrations of radionuclides may vary over time because of the different tasks performed by workers in the area). Variability can not be reduced by additional data collection because the varying values reflect the variable nature of the environment, not a lack of data. The high variability in measured air concentrations in the restricted areas of a LWR nuclear power plant where he worked do not allow adequate reconstruction of his individual internal dose using deterministic methods and therefore probabilistic methods are desirable. The guidance for probabilistic assessment developed by the United States Environmental Protection Agency as well as recommendations of the National Council of Radiation Protection provide an adequate framework for probabilistic reconstruction of

A Simple Flap Design for the Salvage of Immediate Implant-Based Breast Reconstruction.

Science.gov (United States)

Yazar, Sukru; Altinkaya, Altug; Karadag, Emine Cigdem; Kara, Halil; Uras, Cihan

2018-02-01

Breast reconstruction with implants is a real challenge in patients with large breast volume. Skin-reducing inverted-T mastectomy is the best solution for these patients. Delayed wound healing or necrosis at the T-junction area can be seen in this procedure, although it may also lead to severe conditions such as the exposure and loss of implant. In this article, the use of local pedicled flap for the management of these situations was discussed. Between April 2010 and July 2015, 54 patients underwent breast reconstruction by inverted-T skin-reducing mastectomy and immediate implant-based breast reconstruction at our clinic. During the postoperative follow-up period, necrosis at the T-junction area was observed in 8 patients. All the patients received proper wound care, and the necrosis was surgically debrided. The defect was closed with Limberg-like rectangular flap. The mean age was 45.2 (range, 33-54) years. The mean body mass index was 25.57 ± 6.53 (range, 21.2-35.2) kg/m. The mean follow-up was 10.9 (range, 4-19) months. Two patients had implant exposure at the defect site after the debridement. There was no implant loss in any of the patients. The Limberg-like rectangular flap can be used as a salvage option in complicated skin-reducing mastectomies and can be considered as a safe and effective method because of its easy-to-use nature, low cost, and no need for microsurgery experience.

Quantitative reconstruction of PIXE-tomography data for thin samples using GUPIX X-ray emission yields

Energy Technology Data Exchange (ETDEWEB)

Michelet, C., E-mail: michelet@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Barberet, Ph., E-mail: barberet@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Devès, G., E-mail: deves@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Bouguelmouna, B., E-mail: bbouguel@gmail.com [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Bourret, S., E-mail: bourret@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Delville, M.-H., E-mail: delville@icmcb-bordeaux.cnrs.fr [Institut de Chimie de la Matière Condensée de Bordeaux (ICMCB, UPR9048) CNRS, Université de Bordeaux, 87 avenue du Dr. A. Schweitzer, Pessac F-33608 (France); Le Trequesser, Q., E-mail: letreque@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Institut de Chimie de la Matière Condensée de Bordeaux (ICMCB, UPR9048) CNRS, Université de Bordeaux, 87 avenue du Dr. A. Schweitzer, Pessac F-33608 (France); Gordillo, N., E-mail: nuri.gordillo@gmail.com [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Beasley, D.G., E-mail: d.beasley@ucl.ac.uk [Center of Medical Imaging Computing (CMIC), Department of Medical Physics & Bioengineering, University College London, Gower Street, London WC1E 6BT (United Kingdom); and others

2015-04-01

We present here a new development of the TomoRebuild software package, to perform quantitative Particle Induced X-ray Emission Tomography (PIXET) reconstruction. X-ray yields are obtained from the GUPIX code. The GUPIX data base is available for protons up to 5 MeV and also in the 20–100 MeV energy range, deuterons up to 6 MeV, {sup 3}He and alphas up to 12 MeV. In this version, X-ray yields are calculated for thin samples, i.e. without simulating X-ray attenuation. PIXET data reconstruction is kept as long as possible independent from Scanning Transmission Ion Microscopy Tomography (STIMT). In this way, the local mass distribution (in g/cm{sup 3}) of each X-ray emitting element is reconstructed in all voxels of the analyzed volume, only from PIXET data, without the need of associated STIMT data. Only the very last step of data analysis requires STIMT data, in order to normalize PIXET data to obtain concentration distributions, in terms of normalized mass fractions (in μg/g). For this, a noise correction procedure has been designed in ImageJ. Moreover sinogram or image misalignment can be corrected, as well as the difference in beam size between the two experiments. The main features of the TomoRebuild code, user friendly design and modular C++ implementation, were kept. The software package is portable and can run on Windows and Linux operating systems. An optional user-friendly graphic interface was designed in Java, as a plugin for the ImageJ graphic software package. Reconstruction examples are presented from biological specimens of Caenorhabditis elegans – a small nematode constituting a reference model for biology studies. The reconstruction results are compared between the different codes TomoRebuild, DISRA and JPIXET, and different reconstruction methods: Filtered BackProjection (FBP) and Maximum Likelihood Expectation Maximization (MLEM)

Graft infections after surgical aortic reconstructions

OpenAIRE

Berger, P.

2015-01-01

Prosthetic vascular grafts are frequently used to reconstruct (part) of the aorta. Every surgical procedure caries a certain risk for infection and when a prosthetic aortic graft is implanted, this may lead to an aortic graft infection (AGI). Endovascular techniques have gradually replaced open surgical reconstructions as first line of treatment for aorto-iliac diseases. Nowadays, open reconstructions are primarily reserved for patients unsuitable for endovascular reconstructions or for redo ...

REGEN: Ancestral Genome Reconstruction for Bacteria

OpenAIRE

Yang, Kuan; Heath, Lenwood S.; Setubal, João C.

2012-01-01

Ancestral genome reconstruction can be understood as a phylogenetic study with more details than a traditional phylogenetic tree reconstruction. We present a new computational system called REGEN for ancestral bacterial genome reconstruction at both the gene and replicon levels. REGEN reconstructs gene content, contiguous gene runs, and replicon structure for each ancestral genome. Along each branch of the phylogenetic tree, REGEN infers evolutionary events, including gene creation and deleti...

Craniofacial Reconstruction Evaluation by Geodesic Network

OpenAIRE

Zhao, Junli; Liu, Cuiting; Wu, Zhongke; Duan, Fuqing; Wang, Kang; Jia, Taorui; Liu, Quansheng

2014-01-01

Craniofacial reconstruction is to estimate an individual’s face model from its skull. It has a widespread application in forensic medicine, archeology, medical cosmetic surgery, and so forth. However, little attention is paid to the evaluation of craniofacial reconstruction. This paper proposes an objective method to evaluate globally and locally the reconstructed craniofacial faces based on the geodesic network. Firstly, the geodesic networks of the reconstructed craniofacial face and the or...

Dual-fibular reconstruction of a massive tibial defect after Ewing's sarcoma resection in a pediatric patient with a vascular variation.

Science.gov (United States)

Saridis, Alkis G; Megas, Panagiotis D; Georgiou, Christos S; Diamantakis, Georgios M; Tyllianakis, Minos E

2011-01-01

In the management of malignancies of the extremities, limb salvage procedures have recently taken on greater significance. For those patients under intense adjuvant chemotherapy and with massive bone loss, free vascularized fibular grafting is currently advocated as a reliable reconstructive option, maybe because of the controversial results of bone transport in similar situations. However, when there is a vascular abnormality of either the recipient or donor extremity, microsurgical procedures are not feasible, further limiting potential reconstructive alternatives. We present the case of a 13-year-old female patient with Ewing's sarcoma of the right tibia. Preoperative angiography showed that vascularity of the affected side depended totally on a single peroneal artery. The patient was treated initially with multiagent chemotherapy, followed by an excision of 23 cm. The defect was bridged by a gradual medial transportation of the ipsilateral fibula with the Ilizarov technique and strengthened by nonvascularized transfer of the contralateral fibula. Total external fixation time was 162 days. After the removal of the Ilizarov frame a walking cast was applied for another month. At 5 years postoperatively there was no recurrence of the malignancy. The patient had full weight-bearing ability on the affected limb, with preservation of the ankle and knee joints motion and without any limb length discrepancy or axial deformity. The functional outcome that was visible was graded excellent. Transverse distraction osteogenesis of the ipsilateral fibula performed well under chemotherapy, showing unproblematic callus formation. Supplemented with nonvascularized transfer of the contralateral fibula, provided a reconstructive option with biological affinity, sufficient biomechanical strength and durability, and with a decreased complication rate. This case report presents a viable option, especially in cases in which vascular abnormalities of either the donor or the recipient

Task-driven image acquisition and reconstruction in cone-beam CT

International Nuclear Information System (INIS)

Gang, Grace J; Stayman, J Webster; Siewerdsen, Jeffrey H; Ehtiati, Tina

2015-01-01

This work introduces a task-driven imaging framework that incorporates a mathematical definition of the imaging task, a model of the imaging system, and a patient-specific anatomical model to prospectively design image acquisition and reconstruction techniques to optimize task performance. The framework is applied to joint optimization of tube current modulation, view-dependent reconstruction kernel, and orbital tilt in cone-beam CT. The system model considers a cone-beam CT system incorporating a flat-panel detector and 3D filtered backprojection and accurately describes the spatially varying noise and resolution over a wide range of imaging parameters in the presence of a realistic anatomical model. Task-based detectability index (d′) is incorporated as the objective function in a task-driven optimization of image acquisition and reconstruction techniques. The orbital tilt was optimized through an exhaustive search across tilt angles ranging ±30°. For each tilt angle, the view-dependent tube current and reconstruction kernel (i.e. the modulation profiles) that maximized detectability were identified via an alternating optimization. The task-driven approach was compared with conventional unmodulated and automatic exposure control (AEC) strategies for a variety of imaging tasks and anthropomorphic phantoms. The task-driven strategy outperformed the unmodulated and AEC cases for all tasks. For example, d′ for a sphere detection task in a head phantom was improved by 30% compared to the unmodulated case by using smoother kernels for noisy views and distributing mAs across less noisy views (at fixed total mAs) in a manner that was beneficial to task performance. Similarly for detection of a line-pair pattern, the task-driven approach increased d′ by 80% compared to no modulation by means of view-dependent mA and kernel selection that yields modulation transfer function and noise-power spectrum optimal to the task. Optimization of orbital tilt identified the

Overview of image reconstruction

International Nuclear Information System (INIS)

Marr, R.B.

1980-04-01

Image reconstruction (or computerized tomography, etc.) is any process whereby a function, f, on R/sup n/ is estimated from empirical data pertaining to its integrals, ∫f(x) dx, for some collection of hyperplanes of dimension k < n. The paper begins with background information on how image reconstruction problems have arisen in practice, and describes some of the application areas of past or current interest; these include radioastronomy, optics, radiology and nuclear medicine, electron microscopy, acoustical imaging, geophysical tomography, nondestructive testing, and NMR zeugmatography. Then the various reconstruction algorithms are discussed in five classes: summation, or simple back-projection; convolution, or filtered back-projection; Fourier and other functional transforms; orthogonal function series expansion; and iterative methods. Certain more technical mathematical aspects of image reconstruction are considered from the standpoint of uniqueness, consistency, and stability of solution. The paper concludes by presenting certain open problems. 73 references

Rapid tomographic reconstruction based on machine learning for time-resolved combustion diagnostics

Science.gov (United States)

Yu, Tao; Cai, Weiwei; Liu, Yingzheng

2018-04-01

Optical tomography has attracted surged research efforts recently due to the progress in both the imaging concepts and the sensor and laser technologies. The high spatial and temporal resolutions achievable by these methods provide unprecedented opportunity for diagnosis of complicated turbulent combustion. However, due to the high data throughput and the inefficiency of the prevailing iterative methods, the tomographic reconstructions which are typically conducted off-line are computationally formidable. In this work, we propose an efficient inversion method based on a machine learning algorithm, which can extract useful information from the previous reconstructions and build efficient neural networks to serve as a surrogate model to rapidly predict the reconstructions. Extreme learning machine is cited here as an example for demonstrative purpose simply due to its ease of implementation, fast learning speed, and good generalization performance. Extensive numerical studies were performed, and the results show that the new method can dramatically reduce the computational time compared with the classical iterative methods. This technique is expected to be an alternative to existing methods when sufficient training data are available. Although this work is discussed under the context of tomographic absorption spectroscopy, we expect it to be useful also to other high speed tomographic modalities such as volumetric laser-induced fluorescence and tomographic laser-induced incandescence which have been demonstrated for combustion diagnostics.

Virtual 3-D Facial Reconstruction

Directory of Open Access Journals (Sweden)

Martin Paul Evison

2000-06-01

Full Text Available Facial reconstructions in archaeology allow empathy with people who lived in the past and enjoy considerable popularity with the public. It is a common misconception that facial reconstruction will produce an exact likeness; a resemblance is the best that can be hoped for. Research at Sheffield University is aimed at the development of a computer system for facial reconstruction that will be accurate, rapid, repeatable, accessible and flexible. This research is described and prototypical 3-D facial reconstructions are presented. Interpolation models simulating obesity, ageing and ethnic affiliation are also described. Some strengths and weaknesses in the models, and their potential for application in archaeology are discussed.

Anterior Cruciate Ligament Reconstruction using Bone Patellar Tendon Bone autograft in ACL deficient Knee

Directory of Open Access Journals (Sweden)

Navin Kumar Karn

2015-12-01

Full Text Available Background & Objectives: Injury to Anterior Cruciate Ligament (ACL reconstruction has increased because of increased interest in sports. There are various grafts used for reconstruction of ACL, for example, Bone Patellar Tendon Bone, Hamstring etc. The study was conducted to evaluate the results of Bone Patellar Tendon Bone graft used for reconstruction of Anterior Cruciate Ligament.Materials & Methods: 40 patients with chronic ACL deficient knee presenting to Neuro Hospital from July 2011 to June 2013 were included in the study. The patients with intraarticular fracture of knee, severe OA knee, local active or suspected infection and systemic disease that might influence the study results were excluded from the study. Bone patellar tendon bone graft was harvested from ipsilateral knee in all the cases. The patient was followed till 2 year with specified programme of rehabilitation. The pain was assessed using VAS and the function of the knee was assessed using Modified WOMAC knee index.Results: The long term satisfactory results in terms of functional stability, symptom relief and return to preinjury level of activity was seen in 32 cases (80%. Two knees got infected out of which one required arthroscopic debridement. Mean visual analogue scale was 8 and modified WOMAC knee score was 3 at 2 year follow up.Conclusion: Bone patellar tendon bone graft is useful in high demand patients and cost effective option with high patient satisfaction rate for reconstruction of ACL.JCMS Nepal. 2015;11(3:12-15.

Image quality of iterative reconstruction in cranial CT imaging: comparison of model-based iterative reconstruction (MBIR) and adaptive statistical iterative reconstruction (ASiR).

Science.gov (United States)

Notohamiprodjo, S; Deak, Z; Meurer, F; Maertz, F; Mueck, F G; Geyer, L L; Wirth, S

2015-01-01

The purpose of this study was to compare cranial CT (CCT) image quality (IQ) of the MBIR algorithm with standard iterative reconstruction (ASiR). In this institutional review board (IRB)-approved study, raw data sets of 100 unenhanced CCT examinations (120 kV, 50-260 mAs, 20 mm collimation, 0.984 pitch) were reconstructed with both ASiR and MBIR. Signal-to-noise (SNR) and contrast-to-noise (CNR) were calculated from attenuation values measured in caudate nucleus, frontal white matter, anterior ventricle horn, fourth ventricle, and pons. Two radiologists, who were blinded to the reconstruction algorithms, evaluated anonymized multiplanar reformations of 2.5 mm with respect to depiction of different parenchymal structures and impact of artefacts on IQ with a five-point scale (0: unacceptable, 1: less than average, 2: average, 3: above average, 4: excellent). MBIR decreased artefacts more effectively than ASiR (p ASiR was 2 (p ASiR (p ASiR. As CCT is an examination that is frequently required, the use of MBIR may allow for substantial reduction of radiation exposure caused by medical diagnostics. • Model-Based iterative reconstruction (MBIR) effectively decreased artefacts in cranial CT. • MBIR reconstructed images were rated with significantly higher scores for image quality. • Model-Based iterative reconstruction may allow reduced-dose diagnostic examination protocols.

REGEN: Ancestral Genome Reconstruction for Bacteria.

Science.gov (United States)

Yang, Kuan; Heath, Lenwood S; Setubal, João C

2012-07-18

Ancestral genome reconstruction can be understood as a phylogenetic study with more details than a traditional phylogenetic tree reconstruction. We present a new computational system called REGEN for ancestral bacterial genome reconstruction at both the gene and replicon levels. REGEN reconstructs gene content, contiguous gene runs, and replicon structure for each ancestral genome. Along each branch of the phylogenetic tree, REGEN infers evolutionary events, including gene creation and deletion and replicon fission and fusion. The reconstruction can be performed by either a maximum parsimony or a maximum likelihood method. Gene content reconstruction is based on the concept of neighboring gene pairs. REGEN was designed to be used with any set of genomes that are sufficiently related, which will usually be the case for bacteria within the same taxonomic order. We evaluated REGEN using simulated genomes and genomes in the Rhizobiales order.

The situation of radiation oncology patients' relatives. A stocktaking

International Nuclear Information System (INIS)

Momm, Felix; Lingg, Sabine; Adebahr, Sonja; Grosu, Anca-Ligia; Xander, Carola; Becker, Gerhild

2010-01-01

Background and Purpose: Recent studies have shown a very high importance of relatives in decisions about medical interventions. Therefore, the situation of this group was investigated in the sense of a stocktaking by interviewing the closest relatives of radiotherapy patients. Interviewed Persons and Methods: In a defined span of time (6 weeks), a total of 470 relatives (evaluable: n = 287, 61%) of radiotherapy patients were interviewed by a newly developed questionnaire about their contentment with their inclusion in the therapy course. Further, they gave information about specific needs of relatives as well as proposals for direct improvements in the context of a radiation therapy. Results: In total, the relatives were satisfied with their inclusion in the radiotherapy course and with the patient care. As an example, more than 95% of the relatives agreed with the statement ''Here in the hospital my ill relative is cared for well.'' Nevertheless, direct possibilities for improvements were found in the interdisciplinary information about oncologic topics and in the organization of the therapy course. Conclusion: In the stocktaking the situation of radiotherapy patients' relatives was generally satisfactory. Further improvements for the future can be expected mainly from interdisciplinary cancer centers having the best suppositions to care for the relatives, if necessary. Structures known from palliative care can be used as a model. (orig.)

Dental microwear textures: reconstructing diets of fossil mammals

International Nuclear Information System (INIS)

DeSantis, Larisa R G

2016-01-01

Dietary information of fossil mammals can be revealed via the analysis of tooth morphology, tooth wear, tooth geochemistry, and the microscopic wear patterns on tooth surfaces resulting from food processing. Although dental microwear has long been used by anthropologists and paleontologists to clarify diets in a diversity of mammals, until recently these methods focused on the counting of wear features (e.g., pits and scratches) from two-dimensional surfaces (typically via scanning electron microscopes or low-magnification light microscopes). The analysis of dental microwear textures can instead reveal dietary information in a broad range of herbivorous, omnivorous, and carnivorous mammals by characterizing microscopic tooth surfaces in three-dimensions, without the counting of individual surface features. To date, dental microwear textures in ungulates, xenarthrans, marsupials, carnivorans, and primates (including humans and their ancestors) are correlated with known dietary behavior in extant taxa and reconstruct ancient diets in a diversity of prehistoric mammals. For example, tough versus hard object feeding can be characterized across disparate phylogenetic groups and can distinguish grazers, folivorous, and flesh consumers (tougher food consumers) from woody browsers, frugivores, and bone consumers (harder object feeders). This paper reviews how dental microwear textures can be useful to reconstructing diets in a broad array of living and extinct mammals, with commentary on areas of future research. (topical review)

Reconstruction of Eroded and Visually Complicated Archaeological Geometric Patterns: Minaret Choli, Iraq

Directory of Open Access Journals (Sweden)

Rima Al Ajlouni

2011-12-01

Full Text Available Visually complicated patterns can be found in many cultural heritages of the world. Islamic geometric patterns present us with one example of such visually complicated archaeological ornaments. As long-lived artifacts, these patterns have gone through many phases of construction, damage, and repair and are constantly subject to erosion and vandalism. The task of reconstructing these visually complicated ornaments faces many practical challenges. The main challenge is posed by the fact that archaeological reality often deals with ornaments that are broken, incomplete or hidden. Recognizing faint traces of eroded or missing parts proved to be an extremely difficult task. This is also combined with the need for specialized knowledge about the mathematical rules of patterns’ structure, in order to regenerate the missing data. This paper presents a methodology for reconstructing deteriorated Islamic geometric patterns; to predict the features that are not observed and output a complete reconstructed two-dimension accurate measurable model. The simulation process depends primarily on finding the parameters necessary to predict information, at other locations, based on the relationships embedded in the existing data and in the prior -knowledge of these relations. The aim is to build up from the fragmented data and from the historic and general knowledge, a model of the reconstructed object. The proposed methodology was proven to be successful in capturing the accurate structural geometry of many of the deteriorated ornaments on the Minaret Choli, Iraq. However, in the case of extremely deteriorated samples, the proposed methodology failed to recognize the correct geometry. The conceptual framework proposed by this paper can serve as a platform for developing professional tools for fast and efficient results.

Advances in thermographic signal reconstruction

Science.gov (United States)

Shepard, Steven M.; Frendberg Beemer, Maria

2015-05-01

Since its introduction in 2001, the Thermographic Signal Reconstruction (TSR) method has emerged as one of the most widely used methods for enhancement and analysis of thermographic sequences, with applications extending beyond industrial NDT into biomedical research, art restoration and botany. The basic TSR process, in which a noise reduced replica of each pixel time history is created, yields improvement over unprocessed image data that is sufficient for many applications. However, examination of the resulting logarithmic time derivatives of each TSR pixel replica provides significant insight into the physical mechanisms underlying the active thermography process. The deterministic and invariant properties of the derivatives have enabled the successful implementation of automated defect recognition and measurement systems. Unlike most approaches to analysis of thermography data, TSR does not depend on flawbackground contrast, so that it can also be applied to characterization and measurement of thermal properties of flaw-free samples. We present a summary of recent advances in TSR, a review of the underlying theory and examples of its implementation.

Situating Engagement

DEFF Research Database (Denmark)

Korn, Matthias

Our mobile phone is with us at all times. Habitually, we pick it up in the morning and carry it around on our daily routes and routines. Increasingly, we use it to locate ourselves and the things and people around us. With ubiquitous computing, technology is moving into the very fabric of our....... First, situationally appropriate forms of engagement that align well with citizens’ own conceptions are necessary in order to provide relevance and meaning of issues in the moment. Second, situated engagement requires a technological setup which facilitates the co-location of people, place...... with sophisticated prototypes in the wild. It proposes walkshops as a technique for collaborative exploration within actual outdoor environments and the use of field trials as part of an iterative design process in order to look ahead toward use practices that are still in the making....

Robust Adaptive Beamforming with Sensor Position Errors Using Weighted Subspace Fitting-Based Covariance Matrix Reconstruction.

Science.gov (United States)

Chen, Peng; Yang, Yixin; Wang, Yong; Ma, Yuanliang

2018-05-08

When sensor position errors exist, the performance of recently proposed interference-plus-noise covariance matrix (INCM)-based adaptive beamformers may be severely degraded. In this paper, we propose a weighted subspace fitting-based INCM reconstruction algorithm to overcome sensor displacement for linear arrays. By estimating the rough signal directions, we construct a novel possible mismatched steering vector (SV) set. We analyze the proximity of the signal subspace from the sample covariance matrix (SCM) and the space spanned by the possible mismatched SV set. After solving an iterative optimization problem, we reconstruct the INCM using the estimated sensor position errors. Then we estimate the SV of the desired signal by solving an optimization problem with the reconstructed INCM. The main advantage of the proposed algorithm is its robustness against SV mismatches dominated by unknown sensor position errors. Numerical examples show that even if the position errors are up to half of the assumed sensor spacing, the output signal-to-interference-plus-noise ratio is only reduced by 4 dB. Beam patterns plotted using experiment data show that the interference suppression capability of the proposed beamformer outperforms other tested beamformers.

Situational awareness for unmanned ground vehicles in semi-structured environments

Science.gov (United States)

Goodsell, Thomas G.; Snorrason, Magnus; Stevens, Mark R.

2002-07-01

Situational Awareness (SA) is a critical component of effective autonomous vehicles, reducing operator workload and allowing an operator to command multiple vehicles or simultaneously perform other tasks. Our Scene Estimation & Situational Awareness Mapping Engine (SESAME) provides SA for mobile robots in semi-structured scenes, such as parking lots and city streets. SESAME autonomously builds volumetric models for scene analysis. For example, a SES-AME equipped robot can build a low-resolution 3-D model of a row of cars, then approach a specific car and build a high-resolution model from a few stereo snapshots. The model can be used onboard to determine the type of car and locate its license plate, or the model can be segmented out and sent back to an operator who can view it from different viewpoints. As new views of the scene are obtained, the model is updated and changes are tracked (such as cars arriving or departing). Since the robot's position must be accurately known, SESAME also has automated techniques for deter-mining the position and orientation of the camera (and hence, robot) with respect to existing maps. This paper presents an overview of the SESAME architecture and algorithms, including our model generation algorithm.

Statistical iterative reconstruction for streak artefact reduction when using multidetector CT to image the dento-alveolar structures.

Science.gov (United States)

Dong, J; Hayakawa, Y; Kober, C

2014-01-01

When metallic prosthetic appliances and dental fillings exist in the oral cavity, the appearance of metal-induced streak artefacts is not avoidable in CT images. The aim of this study was to develop a method for artefact reduction using the statistical reconstruction on multidetector row CT images. Adjacent CT images often depict similar anatomical structures. Therefore, reconstructed images with weak artefacts were attempted using projection data of an artefact-free image in a neighbouring thin slice. Images with moderate and strong artefacts were continuously processed in sequence by successive iterative restoration where the projection data was generated from the adjacent reconstructed slice. First, the basic maximum likelihood-expectation maximization algorithm was applied. Next, the ordered subset-expectation maximization algorithm was examined. Alternatively, a small region of interest setting was designated. Finally, the general purpose graphic processing unit machine was applied in both situations. The algorithms reduced the metal-induced streak artefacts on multidetector row CT images when the sequential processing method was applied. The ordered subset-expectation maximization and small region of interest reduced the processing duration without apparent detriments. A general-purpose graphic processing unit realized the high performance. A statistical reconstruction method was applied for the streak artefact reduction. The alternative algorithms applied were effective. Both software and hardware tools, such as ordered subset-expectation maximization, small region of interest and general-purpose graphic processing unit achieved fast artefact correction.

Conceptualising forensic science and forensic reconstruction. Part II: The critical interaction between research, policy/law and practice.

Science.gov (United States)

Morgan, R M

2017-11-01

This paper builds on the FoRTE conceptual model presented in part I to address the forms of knowledge that are integral to the four components of the model. Articulating the different forms of knowledge within effective forensic reconstructions is valuable. It enables a nuanced approach to the development and use of evidence bases to underpin decision-making at every stage of a forensic reconstruction by enabling transparency in the reporting of inferences. It also enables appropriate methods to be developed to ensure quality and validity. It is recognised that the domains of practice, research, and policy/law intersect to form the nexus where forensic science is situated. Each domain has a distinctive infrastructure that influences the production and application of different forms of knowledge in forensic science. The channels that can enable the interaction between these domains, enhance the impact of research in theory and practice, increase access to research findings, and support quality are presented. The particular strengths within the different domains to deliver problem solving forensic reconstructions are thereby identified and articulated. It is argued that a conceptual understanding of forensic reconstruction that draws on the full range of both explicit and tacit forms of knowledge, and incorporates the strengths of the different domains pertinent to forensic science, offers a pathway to harness the full value of trace evidence for context sensitive, problem-solving forensic applications. Copyright © 2017 The Author. Published by Elsevier B.V. All rights reserved.

Managing and engineering in complex situations

CERN Document Server

Sousa-Poza, Andres

2013-01-01

With so many terms available to define the same thing, it would seem nearly irresponsible to introduce yet another term (complex situation) to describe a phenomenological state of such as a system. However, a complex situation infers both a broader meaning and imposes a different perspective. Complex in this context is dependent on understanding and reality rather than observer and knowledge.   Situation imposes a gestalt that cannot be characterized within a singular perspective that relegates paradox to a superior/subordinate hierarchy. This also infers that complex situation has no monotonic definition or each definition is by default incomplete. Therefore the perennial derivations for systems such as complex systems, system of systems, federation of systems is no longer a sufficient descriptor for complex situation.  Ergo system and its genealogy lack the constitution to define complex situations. The books' intent is to explore this pathology through a series of papers written by authors that work in ...

REGEN: Ancestral Genome Reconstruction for Bacteria

Directory of Open Access Journals (Sweden)

João C. Setubal

2012-07-01

Full Text Available Ancestral genome reconstruction can be understood as a phylogenetic study with more details than a traditional phylogenetic tree reconstruction. We present a new computational system called REGEN for ancestral bacterial genome reconstruction at both the gene and replicon levels. REGEN reconstructs gene content, contiguous gene runs, and replicon structure for each ancestral genome. Along each branch of the phylogenetic tree, REGEN infers evolutionary events, including gene creation and deletion and replicon fission and fusion. The reconstruction can be performed by either a maximum parsimony or a maximum likelihood method. Gene content reconstruction is based on the concept of neighboring gene pairs. REGEN was designed to be used with any set of genomes that are sufficiently related, which will usually be the case for bacteria within the same taxonomic order. We evaluated REGEN using simulated genomes and genomes in the Rhizobiales order.

Computer Based Road Accident Reconstruction Experiences

Directory of Open Access Journals (Sweden)

Milan Batista

2005-03-01

Full Text Available Since road accident analyses and reconstructions are increasinglybased on specific computer software for simulationof vehicle d1iving dynamics and collision dynamics, and forsimulation of a set of trial runs from which the model that bestdescribes a real event can be selected, the paper presents anoverview of some computer software and methods available toaccident reconstruction experts. Besides being time-saving,when properly used such computer software can provide moreauthentic and more trustworthy accident reconstruction, thereforepractical experiences while using computer software toolsfor road accident reconstruction obtained in the TransportSafety Laboratory at the Faculty for Maritime Studies andTransport of the University of Ljubljana are presented and discussed.This paper addresses also software technology for extractingmaximum information from the accident photo-documentationto support accident reconstruction based on the simulationsoftware, as well as the field work of reconstruction expertsor police on the road accident scene defined by this technology.

Magni Reproducibility Example

DEFF Research Database (Denmark)

2016-01-01

An example of how to use the magni.reproducibility package for storing metadata along with results from a computational experiment. The example is based on simulating the Mandelbrot set.......An example of how to use the magni.reproducibility package for storing metadata along with results from a computational experiment. The example is based on simulating the Mandelbrot set....

Data-parallel tomographic reconstruction : A comparison of filtered backprojection and direct Fourier reconstruction

NARCIS (Netherlands)

Roerdink, J.B.T.M.; Westenberg, M.A

1998-01-01

We consider the parallelization of two standard 2D reconstruction algorithms, filtered backprojection and direct Fourier reconstruction, using the data-parallel programming style. The algorithms are implemented on a Connection Machine CM-5 with 16 processors and a peak performance of 2 Gflop/s.

Vertex Reconstruction in ATLAS Run II

CERN Document Server

Zhang, Matt; The ATLAS collaboration

2016-01-01

Vertex reconstruction is the process of taking reconstructed tracks and using them to determine the locations of proton collisions. In this poster we present the performance of our current vertex reconstruction algorithm, and look at investigations into potential improvements from a new seed finding method.

Beard reconstruction: A surgical algorithm.

Science.gov (United States)

Ninkovic, M; Heidekrueger, P I; Ehrl, D; von Spiegel, F; Broer, P N

2016-06-01

Facial defects with loss of hair-bearing regions can be caused by trauma, infection, tumor excision, or burn injury. The presented analysis evaluates a series of different surgical approaches with a focus on male beard reconstruction, emphasizing the role of tissue expansion of regional and free flaps. Locoregional and free flap reconstructions were performed in 11 male patients with 14 facial defects affecting the hair-bearing bucco-mandibular or perioral region. In order to minimize donor-site morbidity and obtain large amounts of thin, pliable, hair-bearing tissue, pre-expansion was performed in five of 14 patients. Eight of 14 patients were treated with locoregional flap reconstructions and six with free flap reconstructions. Algorithms regarding pre- and intraoperative decision making are discussed and long-term (mean follow-up 1.5 years) results analyzed. Major complications, including tissue expander infection with the need for removal or exchange, partial or full flap loss, occurred in 0% (0/8) of patients with locoregional flaps and in 17% (1/6) of patients undergoing free flap reconstructions. Secondary refinement surgery was performed in 25% (2/8) of locoregional flaps and in 67% (4/6) of free flaps. Both locoregional and distant tissue transfers play a role in beard reconstruction, while pre-expansion remains an invaluable tool. Paying attention to the presented principles and considering the significance of aesthetic facial subunits, range of motion, aesthetics, and patient satisfaction were improved long term in all our patients while minimizing donor-site morbidity. Copyright © 2016 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Forensic Facial Reconstruction: The Final Frontier.

Science.gov (United States)

Gupta, Sonia; Gupta, Vineeta; Vij, Hitesh; Vij, Ruchieka; Tyagi, Nutan

2015-09-01

Forensic facial reconstruction can be used to identify unknown human remains when other techniques fail. Through this article, we attempt to review the different methods of facial reconstruction reported in literature. There are several techniques of doing facial reconstruction, which vary from two dimensional drawings to three dimensional clay models. With the advancement in 3D technology, a rapid, efficient and cost effective computerized 3D forensic facial reconstruction method has been developed which has brought down the degree of error previously encountered. There are several methods of manual facial reconstruction but the combination Manchester method has been reported to be the best and most accurate method for the positive recognition of an individual. Recognition allows the involved government agencies to make a list of suspected victims'. This list can then be narrowed down and a positive identification may be given by the more conventional method of forensic medicine. Facial reconstruction allows visual identification by the individual's family and associates to become easy and more definite.

Multi-sheet surface rebinning methods for reconstruction from asymmetrically truncated cone beam projections: I. Approximation and optimality

International Nuclear Information System (INIS)

Betcke, Marta M; Lionheart, William R B

2013-01-01

The mechanical motion of the gantry in conventional cone beam CT scanners restricts the speed of data acquisition in applications with near real time requirements. A possible resolution of this problem is to replace the moving source detector assembly with static parts that are electronically activated. An example of such a system is the Rapiscan Systems RTT80 real time tomography scanner, with a static ring of sources and axially offset static cylinder of detectors. A consequence of such a design is asymmetrical axial truncation of the cone beam projections resulting, in the sense of integral geometry, in severely incomplete data. In particular we collect data only in a fraction of the Tam–Danielsson window, hence the standard cone beam reconstruction techniques do not apply. In this work we propose a family of multi-sheet surface rebinning methods for reconstruction from such truncated projections. The proposed methods combine analytical and numerical ideas utilizing linearity of the ray transform to reconstruct data on multi-sheet surfaces, from which the volumetric image is obtained through deconvolution. In this first paper in the series, we discuss the rebinning to multi-sheet surfaces. In particular we concentrate on the underlying transforms on multi-sheet surfaces and their approximation with data collected by offset multi-source scanning geometries like the RTT. The optimal multi-sheet surface and the corresponding rebinning function are found as a solution of a variational problem. In the case of the quadratic objective, the variational problem for the optimal rebinning pair can be solved by a globally convergent iteration. Examples of optimal rebinning pairs are computed for different trajectories. We formulate the axial deconvolution problem for the recovery of the volumetric image from the reconstructions on multi-sheet surfaces. Efficient and stable solution of the deconvolution problem is the subject of the second paper in this series (Betcke and

Alternative reconstruction after pancreaticoduodenectomy

Directory of Open Access Journals (Sweden)

Cooperman Avram M

2008-01-01

Full Text Available Abstract Background Pancreaticoduodenectomy is the procedure of choice for tumors of the head of the pancreas and periampulla. Despite advances in surgical technique and postoperative care, the procedure continues to carry a high morbidity rate. One of the most common morbidities is delayed gastric emptying with rates of 15%–40%. Following two prolonged cases of delayed gastric emptying, we altered our reconstruction to avoid this complication altogether. Subsequently, our patients underwent a classic pancreaticoduodenectomy with an undivided Roux-en-Y technique for reconstruction. Methods We reviewed the charts of our last 13 Whipple procedures evaluating them for complications, specifically delayed gastric emptying. We compared the outcomes of those patients to a control group of 15 patients who underwent the Whipple procedure with standard reconstruction. Results No instances of delayed gastric emptying occurred in patients who underwent an undivided Roux-en-Y technique for reconstruction. There was 1 wound infection (8%, 1 instance of pneumonia (8%, and 1 instance of bleeding from the gastrojejunal staple line (8%. There was no operative mortality. Conclusion Use of the undivided Roux-en-Y technique for reconstruction following the Whipple procedure may decrease the incidence of delayed gastric emptying. In addition, it has the added benefit of eliminating bile reflux gastritis. Future randomized control trials are recommended to further evaluate the efficacy of the procedure.

Accelerated fast iterative shrinkage thresholding algorithms for sparsity-regularized cone-beam CT image reconstruction

International Nuclear Information System (INIS)

Xu, Qiaofeng; Sawatzky, Alex; Anastasio, Mark A.; Yang, Deshan; Tan, Jun

2016-01-01