WorldWideScience

Sample records for site selection methodology

  1. Methodology for selecting low-level radioactive waste disposal sites with application to the Oak Ridge Reservation

    International Nuclear Information System (INIS)

    Lee, D.W.; Ketelle, R.H.

    1984-01-01

    A methodology was developed to select an environmentally acceptable site for low-level radioactive waste disposal for a predetermined region of interest using prescribed site suitability requirements. The methodology provides a defensible means for identifying candidate areas within the region, candidate sites within the areas, and an environmentally preferred site from the candidate sites. This is accomplished in site screening and site characterization stages. The site screening stage relies on reconnaissance data to identify a preferred site. The site characterization stage relies on a detailed site investigation to determine site acceptability. The methodology was applied to the US Department of Energy Oak Ridge Reservation through the site screening stage. 6 references, 3 figures, 7 tables

  2. Selection Methodology Approach to Preferable and Alternative Sites for the First NPP Project in Yemen

    Energy Technology Data Exchange (ETDEWEB)

    Kassim, Moath [Kyunghe Univ., Yongin (Korea, Republic of); Kessel, David S. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-05-15

    The purpose of this paper is to briefly present the methodology and results of the first siting study for the first nuclear power plant (NPP) in Yemen. In this study it has been demonstrated that there are suitable sites for specific unit/units power of 1000 MWt (about 300 MWe) nuclear power plant. To perform the site selection, a systematic selection method was developed. The method uses site-specific data gathered by literature review and expert judgement to identify the most important site selection criteria. A two-step site selection process was used. Candidate sites were chosen that meet a subset of the selection criteria that form the most important system constraints. These candidate sites were then evaluated against the full set of selection criteria using the Analytical Hierarchy Process Method (AHP). Candidate sites underwent a set of more specific siting criteria weighted by expert judgment to select preferable sites and alternatives using AHP method again. Expert Judgment method was used to rank and weight the importance of each criteria, then AHP method used to evaluate and weight the relation between criterion to criterion and between all criteria against the global weight. Then logical decision software was used to rank sites upon their weighting value.

  3. Selection Methodology Approach to Preferable and Alternative Sites for the First NPP Project in Yemen

    International Nuclear Information System (INIS)

    Kassim, Moath; Kessel, David S.

    2015-01-01

    The purpose of this paper is to briefly present the methodology and results of the first siting study for the first nuclear power plant (NPP) in Yemen. In this study it has been demonstrated that there are suitable sites for specific unit/units power of 1000 MWt (about 300 MWe) nuclear power plant. To perform the site selection, a systematic selection method was developed. The method uses site-specific data gathered by literature review and expert judgement to identify the most important site selection criteria. A two-step site selection process was used. Candidate sites were chosen that meet a subset of the selection criteria that form the most important system constraints. These candidate sites were then evaluated against the full set of selection criteria using the Analytical Hierarchy Process Method (AHP). Candidate sites underwent a set of more specific siting criteria weighted by expert judgment to select preferable sites and alternatives using AHP method again. Expert Judgment method was used to rank and weight the importance of each criteria, then AHP method used to evaluate and weight the relation between criterion to criterion and between all criteria against the global weight. Then logical decision software was used to rank sites upon their weighting value

  4. Methodology of site studies

    International Nuclear Information System (INIS)

    Caries, J.C.; Hugon, J.; Grauby, A.

    1980-01-01

    This methodology consists in an essentially dynamic, estimated and follow-up analysis of the impact of discharges on all the environment compartments, whether natural or not, that play a part in the protection of man and his environment. It applies at two levels, to wit: the choice of site, or the detailed study of the site selected. Two examples of its application will be developed, namely: at the choice of site level in the case of marine sites, and of the detailed study level of the chosen site in that of a riverside site [fr

  5. Analysis Methodology for Optimal Selection of Ground Station Site in Space Missions

    Science.gov (United States)

    Nieves-Chinchilla, J.; Farjas, M.; Martínez, R.

    2013-12-01

    Optimization of ground station sites is especially important in complex missions that include several small satellites (clusters or constellations) such as the QB50 project, where one ground station would be able to track several spatial vehicles, even simultaneously. In this regard the design of the communication system has to carefully take into account the ground station site and relevant signal phenomena, depending on the frequency band. To propose the optimal location of the ground station, these aspects become even more relevant to establish a trusted communication link due to the ground segment site in urban areas and/or selection of low orbits for the space segment. In addition, updated cartography with high resolution data of the location and its surroundings help to develop recommendations in the design of its location for spatial vehicles tracking and hence to improve effectiveness. The objectives of this analysis methodology are: completion of cartographic information, modelling the obstacles that hinder communication between the ground and space segment and representation in the generated 3D scene of the degree of impairment in the signal/noise of the phenomena that interferes with communication. The integration of new technologies of geographic data capture, such as 3D Laser Scan, determine that increased optimization of the antenna elevation mask, in its AOS and LOS azimuths along the horizon visible, maximizes visibility time with spatial vehicles. Furthermore, from the three-dimensional cloud of points captured, specific information is selected and, using 3D modeling techniques, the 3D scene of the antenna location site and surroundings is generated. The resulting 3D model evidences nearby obstacles related to the cartographic conditions such as mountain formations and buildings, and any additional obstacles that interfere with the operational quality of the antenna (other antennas and electronic devices that emit or receive in the same bandwidth

  6. Effect of methodological and ecological approaches on heterogeneity of nest-site selection of a long-lived vulture.

    Directory of Open Access Journals (Sweden)

    Rubén Moreno-Opo

    Full Text Available The application of scientific-based conservation measures requires that sampling methodologies in studies modelling similar ecological aspects produce comparable results making easier their interpretation. We aimed to show how the choice of different methodological and ecological approaches can affect conclusions in nest-site selection studies along different Palearctic meta-populations of an indicator species. First, a multivariate analysis of the variables affecting nest-site selection in a breeding colony of cinereous vulture (Aegypius monachus in central Spain was performed. Then, a meta-analysis was applied to establish how methodological and habitat-type factors determine differences and similarities in the results obtained by previous studies that have modelled the forest breeding habitat of the species. Our results revealed patterns in nesting-habitat modelling by the cinereous vulture throughout its whole range: steep and south-facing slopes, great cover of large trees and distance to human activities were generally selected. The ratio and situation of the studied plots (nests/random, the use of plots vs. polygons as sampling units and the number of years of data set determined the variability explained by the model. Moreover, a greater size of the breeding colony implied that ecological and geomorphological variables at landscape level were more influential. Additionally, human activities affected in greater proportion to colonies situated in Mediterranean forests. For the first time, a meta-analysis regarding the factors determining nest-site selection heterogeneity for a single species at broad scale was achieved. It is essential to homogenize and coordinate experimental design in modelling the selection of species' ecological requirements in order to avoid that differences in results among studies would be due to methodological heterogeneity. This would optimize best conservation and management practices for habitats and species in

  7. Criteria for the development and use of the methodology for environmentally-acceptable fossil energy site evaluation and selection. Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Eckstein, L.; Northrop, G.; Scott, R.

    1980-02-01

    This report serves as a companion document to the report, Volume 1: Environmentally-Acceptable Fossil Energy Site Evaluation and Selection: Methodology and Users Guide, in which a methodology was developed which allows the siting of fossil fuel conversion facilities in areas with the least environmental impact. The methodology, known as SELECS (Site Evaluation for Energy Conversion Systems) does not replace a site specific environmental assessment, or an environmental impact statement (EIS), but does enhance the value of an EIS by thinning down the number of options to a manageable level, by doing this in an objective, open and selective manner, and by providing preliminary assessment and procedures which can be utilized during the research and writing of the actual impact statement.

  8. Use of DOE site selection criteria for screening low-level waste disposal sites on the Oak Ridge Reservation

    International Nuclear Information System (INIS)

    Lee, D.W.; Ketelle, R.H.; Stinton, L.H.

    1983-09-01

    The proposed Department of Energy (DOE) site selection criteria were applied to the Oak Ridge Reservation, and the application was evaluated to determine the criteria's usefulness in the selection of a low-level waste disposal site. The application of the criteria required the development of a methodology to provide a framework for evaluation. The methodology is composed of site screening and site characterization stages. The site screening stage relies on reconnaissance data to identify a preferred site capable of satisfying the site selection criteria. The site characterization stage relies on a detailed site investigation to determine site acceptability. The site selection criteria were applied to the DOE Oak Ridge Reservation through the site screening stage. Results of this application were similar to those of a previous siting study on the Oak Ridge Reservation. The DOE site selection criteria when coupled with the methodology that was developed were easily applied and would be adaptable to any region of interest

  9. Selection of low-level radioactive waste disposal sites using screening models versus more complex methodologies

    International Nuclear Information System (INIS)

    Uslu, I.; Fields, D.E.

    1993-01-01

    The task of choosing a waste-disposal site from a set of candidate sites requires an approach capable of objectively handling many environmental variables for each site. Several computer methodologies have been developed to assist in the process of choosing a site for the disposal of low-level radioactive waste; however, most of these models are costly to apply, in terms of computer resources and the time and effort required by professional modelers, geologists, and waste-disposal experts. The authors describe how the relatively simple DRASTIC methodology (a standardized system for evaluating groundwater pollution potential using hydrogeologic settings) may be used for open-quotes pre-screeningclose quotes of sites to determine which subset of candidate sites is worthy of more detailed screening. Results of site comparisons made with DRASTIC are compared with results obtained using PRESTO-II methodology, which is representative of the more complex release-transport-human exposure methodologies. 6 refs., 1 fig., 1 tab

  10. Site selection for new nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, Paul C.; Dubinsky, Melissa; Tastan, Erdem Onur, E-mail: paul.rizzo@rizzoassoc.com, E-mail: melissa.dubinsky@rizzoassoc.com, E-mail: onur.tastan@rizzoassoc.com [RIZZO Associates Inc., Pittsburgh, PA (United States); Miano, Sandra C., E-mail: scm27@psu.edu [Eletrobras Termonuclear S.A. (ELETRONUCLEAR), RJ (Brazil); Pennsylvania State University, Department of Mechanical and Nuclear Engineering, State College, PA (United States)

    2015-07-01

    The current methodology for selecting the most advantageous site(s) for nuclear power plant (NPP) development is based on the latest evolution of protocols originally established in the 1990's by the Electric Power Research Institute (EPRI) and others for programs in the USA, and more recently by the International Atomic Energy Agency (IAEA), among others. The methodology includes protocols that account for lessons learned from both the Gen III projects and the catastrophic event at Fukushima, Japan. In general, the approach requires consideration of Exclusionary or 'fatal flaw' Criteria first, based on safety as well as significant impact to the environment or human health. Sites must meet all of these Exclusionary Criteria to be considered for NPP development. Next, the remaining sites are evaluated for Avoidance Criteria that affect primarily ease of construction and operations, which allow a ranking of sites best suited for NPP development. Finally, Suitability Criteria are applied to the potential sites to better differentiate between closely ranked sites. Generally, final selection of a Preferred and an Alternate Site will require balancing of factors, expert judgment, and client input, as sites being compared will differ in their scores associated with different Avoidance Criteria and Suitability Criteria. RIZZO Associates (RIZZO) offers in this paper a modification to this methodology for selecting the site for NPP development, which accords to the categories of Exclusionary, Avoidance and Suitability Criteria strict definitions which can be considered as Absolute Factors, Critical Factors, and Economic Factors for a more focused approach to site selection. Absolute Factors include all of the safety-related Exclusionary Criteria. Critical Factors are those that are difficult to overcome unless extraordinary mitigation measures are implemented; they have a significant impact on the ability of the project to be successful and may cause the

  11. Site selection for new nuclear power plants

    International Nuclear Information System (INIS)

    Rizzo, Paul C.; Dubinsky, Melissa; Tastan, Erdem Onur; Miano, Sandra C.

    2015-01-01

    The current methodology for selecting the most advantageous site(s) for nuclear power plant (NPP) development is based on the latest evolution of protocols originally established in the 1990's by the Electric Power Research Institute (EPRI) and others for programs in the USA, and more recently by the International Atomic Energy Agency (IAEA), among others. The methodology includes protocols that account for lessons learned from both the Gen III projects and the catastrophic event at Fukushima, Japan. In general, the approach requires consideration of Exclusionary or 'fatal flaw' Criteria first, based on safety as well as significant impact to the environment or human health. Sites must meet all of these Exclusionary Criteria to be considered for NPP development. Next, the remaining sites are evaluated for Avoidance Criteria that affect primarily ease of construction and operations, which allow a ranking of sites best suited for NPP development. Finally, Suitability Criteria are applied to the potential sites to better differentiate between closely ranked sites. Generally, final selection of a Preferred and an Alternate Site will require balancing of factors, expert judgment, and client input, as sites being compared will differ in their scores associated with different Avoidance Criteria and Suitability Criteria. RIZZO Associates (RIZZO) offers in this paper a modification to this methodology for selecting the site for NPP development, which accords to the categories of Exclusionary, Avoidance and Suitability Criteria strict definitions which can be considered as Absolute Factors, Critical Factors, and Economic Factors for a more focused approach to site selection. Absolute Factors include all of the safety-related Exclusionary Criteria. Critical Factors are those that are difficult to overcome unless extraordinary mitigation measures are implemented; they have a significant impact on the ability of the project to be successful and may cause the

  12. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1993-03-01

    This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  13. GIS-based site selection methodology for hybrid renewable energy systems: A case study from western Turkey

    International Nuclear Information System (INIS)

    Aydin, Nazli Yonca; Kentel, Elcin; Sebnem Duzgun, H.

    2013-01-01

    Highlights: ► We proposed a site selection methodology for renewable energy systems. ► Fuzzy logic and geographic information system tools are used. ► Alternative locations are evaluated in terms of economic and environmental criteria. - Abstract: Renewable energy sources are presently being considered as alternatives to fossil fuels, because they are perpetual, environmentally friendly, and release negligible amounts of greenhouse gases to the atmosphere while producing energy. A disadvantage of renewable energy systems, however, is that continuous energy generation is not possible by using only one type of renewable energy system, since renewable energy resources depend on climate and weather conditions. Two or more renewable energy systems can be integrated into a hybrid system to overcome this problem so that when one resource is not available, the other can continue producing energy. Another disadvantage of renewable energy sources is that they are not available at every geographic location. Their use is mostly advantageous at remote locations that often are of high ecological value. Thus, identification of preferable locations for renewable energy systems is a decision-making problem that requires evaluation of the potential of the resource together with economic and environmental limitations. This paper introduces a methodology for site selection of hybrid wind solar–PV renewable energy systems. First, environmental acceptability and economic feasibility objectives are identified through a comprehensive review of the literature, current Turkish laws and legislations, and interviews with the General Directorate of Electrical Power Resources Survey and Development Administration of Turkey. Second, viable locations in terms of environmental acceptability and economic feasibility are determined through a fuzzy decision-making procedure that uses ordered weighted averaging algorithm for aggregating multiple objectives. Then, priority sites are identified

  14. Comparison between dispersed nuclear power plants and a nuclear energy center at a hypothetical site on Kentucky Lake, Tennessee. Vol. IV. A site selection methodology

    International Nuclear Information System (INIS)

    Rosemarin, C.S.; Yaffee, S.L.

    1976-09-01

    A methodology has been developed for selecting suitable sites for development as nuclear energy centers. First, the forty-eight contiguous states were screened on the basis of four variables: (1) seismic stability; (2) distance from projected population centers; (3) adequate water supply; and (4) noninterference with scenic and reserved lands. After location of a surrogate area in north central Tennessee, further screening was performed using 22 variables to find a suitable 75-sq-mile surrogate site within this 1500-sq-mile area. A computer method for screening the surrogate area is presented, and the use of the data for the 22 variables is illustrated

  15. Development of the NUMO pre-selection, site-specific safety case

    International Nuclear Information System (INIS)

    Fujiyama, Tetsuo; Suzuki, Satoru; Deguchi, Akira; Umeki, Hiroyuki

    2016-01-01

    Key conclusions: ◆ “The NUMO pre-selection, site-specific safety case” provides the basic structure for subsequent safety cases that will be applied to any selected site, emphasising practical approaches and methodology which will be applicable for the conditions/constraints during an actual siting process. ◆ The preliminary results of the design and safety assessment would underpin the feasibility and safety of geological disposal in Japan.

  16. Methodology of site protection studies

    International Nuclear Information System (INIS)

    Farges, L.

    1980-01-01

    Preliminary studies preceding building of a nuclear facility aim at assessing the choice of a site and establishing operating and control procedures. These studies are of two types. Studies on the impact of environment on the nuclear facility to be constructed form one type and studies on the impact of nuclear facilities on the environment form the second type. A methodology giving a framework to studies of second type is presented. These studies are undertaken to choose suitable sites for nuclear facilities. After a preliminary selection of a site based on the first estimate, a detailed site study is undertaken. The procedure for this consists of five successive phases, namely, (1) an inquiry assessing the initial state of the site, (2) an initial synthesis of accumulated information for assessing the health and safety consequences of releases, (3) laboratory and field studies simulating the movement of waste products for a quantitative assessment of effects, (4) final synthesis for laying down the release limits and radiological control methods, and (5) conclusions based on comparing the data of final synthesis to the limits prescribed by regulations. These five phases are outlined. Role of periodic reassessments after the facility is in operation for same time is explained. (M.G.B.)

  17. A methodology for selection of wind energy system locations using multicriterial analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sansevic, M.; Rabadan, Lj. Pilic [Croatia Univ., Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split (Croatia)

    1996-12-31

    The effectiveness of a wind turbine generator depends not only on its performance but also on the site`s wind resource. Thus the problem of location selection should be approached systematically, by considering a set of relevant parameters particularly those having a significant economical and ecological impact. This paper presents the methodology used in location selection for the operation of wind energy system. It is based on a multicriterial analysis which enables comparison and ranking of locations according to a set of different parameters. Principal objectives (criteria) in location selection are: energy-economical, technical-technological, physical planning and environment and life protection objectives. For the mathematical modeling of this multicriterial problem the PROMETHEE method is chosen which is developed especially for the solution of rather ``poorly`` structured problems, thus justifying its application in the preliminary stage of site selection for the wind energy systems. The developed methodology is applied in selecting the locations in the island of Rhodes using the available database of the Geographic Information System and the wind potential data obtained by means of the AIOLOS program. (Author)

  18. Hanford Site Risk Assessment Methodology. Revision 3

    International Nuclear Information System (INIS)

    1995-05-01

    This methodology has been developed to prepare human health and ecological evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigations (RI) and the Resource conservation and Recovery Act of 1976 (RCRA) facility investigations (FI) performed at the Hanford Site pursuant to the hanford Federal Facility Agreement and Consent Order (Ecology et al. 1994), referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies site-specific risk assessment considerations and integrates them with approaches for evaluating human and ecological risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  19. Screening methodology for site selection of a nuclear waste repository in shale formations in Germany

    International Nuclear Information System (INIS)

    Hoth, P.; Krull, P.; Wirth, H.

    2004-01-01

    The radioactive waste disposal policy in the Federal Republic of Germany is based on the principle that all types of radioactive waste must be disposed of in deep geological formations. Because of the favourable properties of rock salt and the existence of thick rock salt formations in Germany, so far most of the research in the field of radioactive waste disposal sites was focused on the study of the use of rock salt. In addition, German research organisations have also conducted generic research and development projects in alternative geological formations (Wanner and Brauer, 2001), but a comprehensive evaluation of their utilisation has been only done for parts of the crystalline rocks in Germany. Research projects on argillaceous rocks started relatively late, so that German experience is mainly connected to German research work with the corresponding European Underground Research Laboratories and the exploration of the former Konrad iron mine as a potential repository site for radioactive waste with negligible heat generation. The German Federal Government has signed in 2001 an agreement with national utility companies to end electricity generation by nuclear power. This decision affected the entire German radioactive waste isolation strategy and especially the repository projects. The utility companies agreed upon standstill of exploration at the Gorleben site and the Federal Ministry for the Environment tries to establish a new comprehensive procedure for the selection of a repository site, built upon well-founded criteria incorporating public participation. Step 3 of the planning includes the examination of further sites in Germany and the comparison with existing sites and concepts. Under these circumstances, argillaceous rock (clay and shale) formations are now a special area of interest in Germany and the development of a screening methodology was required for the evaluation of shales as host and barrier rocks for nuclear waste repositories. (author)

  20. Hanford Site baseline risk assessment methodology. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site.

  1. A proposed descriptive methodology for environmental geologic (envirogeologic) site characterization

    International Nuclear Information System (INIS)

    Schwarz, D.L.; Snyder, W.S.

    1994-01-01

    We propose a descriptive methodology for use in environmental geologic (envirogeologic) site characterization. The method uses traditional sedimentologic descriptions augmented by environmental data needs, and facies analysis. Most other environmental methodologies for soil and sediment characterization use soil engineering and engineering geology techniques that classify by texture and engineering properties. This technique is inadequate for envirogeologic characterization of sediments. In part, this inadequacy is due to differences in the grain-size between the Unified soil Classification and the Udden-Wentworth scales. Use of the soil grain-size classification could easily cause confusion when attempting to relate descriptions based on this classification to our basic understanding of sedimentary depositional systems. The proposed envirogeologic method uses descriptive parameters to characterize a sediment sample, suggests specific tests on samples for adequate characterization, and provides a guidelines for subsurface facies analysis, based on data retrieved from shallow boreholes, that will allow better predictive models to be developed. This methodology should allow for both a more complete site assessment, and provide sufficient data for selection of the appropriate remediation technology, including bioremediation. 50 refs

  2. Principle and methodology of nuclear power plant site selection. Application to radiocobalt cycle in the Rhone river

    International Nuclear Information System (INIS)

    Georges, J.

    1987-01-01

    In a first bibliographic part, after some generalities on radioactivity and nuclear power, general principles of radiation protection and national and international regulations are presented. The methodology of the radioecological study involved in site selection is developed. In a second more experimental part, the processing of radiocobalt gamma radioactivity measurement in water, fishes, plants and Rhone river sediments demonstrates the influence of age and geographical situation of the nuclear power stations located along the river. A laboratory experiment of cobalt 60 transfer from chironomes larvae to carp is carried out. Comparison with the results of other laboratory experiments makes it possible to propose an experimental model of cobalt transfer within a fresh water ecosystem; radioactivity levels calculated for various compartments seem to be consistent with the Rhone river levels [fr

  3. A multicriteria-based methodology for site prioritisation in sediment management.

    Science.gov (United States)

    Alvarez-Guerra, Manuel; Viguri, Javier R; Voulvoulis, Nikolaos

    2009-08-01

    Decision-making for sediment management is a complex task that incorporates the selections of areas for remediation and the assessment of options for any mitigation required. The application of Multicriteria Analysis (MCA) to rank different areas, according to their need for sediment management, provides a great opportunity for prioritisation, a first step in an integrated methodology that finally aims to assess and select suitable alternatives for managing the identified priority sites. This paper develops a methodology that starts with the delimitation of management units within areas of study, followed by the application of MCA methods that allows ranking of these management units, according to their need for remediation. This proposed process considers not only scientific evidence on sediment quality, but also other relevant aspects such as social and economic criteria associated with such decisions. This methodology is illustrated with its application to the case study area of the Bay of Santander, in northern Spain, highlighting some of the implications of utilising different MCA methods in the process. It also uses site-specific data to assess the subjectivity in the decision-making process, mainly reflected through the assignment of the criteria weights and uncertainties in the criteria scores. Analysis of the sensitivity of the results to these factors is used as a way to assess the stability and robustness of the ranking as a first step of the sediment management decision-making process.

  4. Environmentally-acceptable fossil energy site evaluation and selection: methodology and user's guide. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Northrop, G.M.

    1980-02-01

    This report is designed to facilitate assessments of environmental and socioeconomic impacts of fossil energy conversion facilities which might be implemented at potential sites. The discussion of methodology and the User's Guide contained herein are presented in a format that assumes the reader is not an energy technologist. Indeed, this methodology is meant for application by almost anyone with an interest in a potential fossil energy development - planners, citizen groups, government officials, and members of industry. It may also be of instructional value. The methodology is called: Site Evaluation for Energy Conversion Systems (SELECS) and is organized in three levels of increasing sophistication. Only the least complicated version - the Level 1 SELECS - is presented in this document. As stated above, it has been expressly designed to enable just about anyone to participate in evaluating the potential impacts of a proposed energy conversion facility. To accomplish this objective, the Level 1 calculations have been restricted to ones which can be performed by hand in about one working day. Data collection and report preparation may bring the total effort required for a first or one-time application to two to three weeks. If repeated applications are made in the same general region, the assembling of data for a different site or energy conversion technology will probably take much less time.

  5. Site selection for nuclear power plants and geologic seismologia influence

    International Nuclear Information System (INIS)

    Castro Feitosa, G. de.

    1985-01-01

    The site selection for nuclear power plants is analised concerning to the process, methodology and the phases in an overall project efforts. The factors affecting are analised on a general viewpoint, showing the considerations given to every one. The geologic and seismologic factors influence on the foundation design are more detailed analised, with required investigation and procedures accordingly sub-soil conditions in the site [pt

  6. Site selection handbook: Workshop on site selection for low-level radioactive waste disposal facilities

    International Nuclear Information System (INIS)

    1987-10-01

    The Low-Level Radioactive Waste Policy Amendments Act of 1985 (LLRWPAA) requires the Department of Energy (DOE) to provide technical assistance to ''...those compact regions, host States and nonmember States determined by the Secretary to require assistance.'' Technical assistance has been defined to include, but not be limited to, ''technical guidelines for site selection.'' This site selection workshop was developed to assist States and Compacts in developing new low-level radioactive waste (LLW) disposal sites in accordance with the requirements of the LLRWPAA. The workshop comprises a series of lectures, discussion topics, and exercises, supported by this Site Selection Workshop Handbook, designed to examine various aspects of a comprehensive site selection program. It is not an exhaustive treatment of all aspects of site selection, nor is it prescriptive. The workshop focuses on the major elements of site selection and the tools that can be used to implement the site selection program

  7. The site selection process

    International Nuclear Information System (INIS)

    Kittel, J.H.

    1989-01-01

    One of the most arduous tasks associated with the management of radioactive wastes is the siting of new disposal facilities. Experience has shown that the performance of the disposal facility during and after disposal operations is critically dependent on the characteristics of the site itself. The site selection process consists of defining needs and objectives, identifying geographic regions of interest, screening and selecting candidate sites, collecting data on the candidate sites, and finally selecting the preferred site. Before the site selection procedures can be implemented, however, a formal legal system must be in place that defines broad objectives and, most importantly, clearly establishes responsibilities and accompanying authorities for the decision-making steps in the procedure. Site selection authorities should make every effort to develop trust and credibility with the public, local officials, and the news media. The responsibilities of supporting agencies must also be spelled out. Finally, a stable funding arrangement must be established so that activities such as data collection can proceed without interruption. Several examples, both international and within the US, are given

  8. SITE: a methodology for assessment of energy facility siting patterns. Regional studies program

    International Nuclear Information System (INIS)

    Frigerio, N.A.; Habegger, L.J.; King, R.F.; Hoover, L.J.; Clark, N.A.; Cobian, J.M.

    1975-08-01

    The timely development of the nation's energy production capacity in a manner that minimizes potential adverse local and regional impacts associated with energy facilities requires the use of sophisticated techniques for evaluation of siting alternatives and fuel cycle options. This report is a documentation of the computerized SITE methodology that has been developed for evaluating health, environmental, and socioeconomic impacts related to utilization of alternate sites for energy production within a region of interest. The cost, impact, and attribute vectors, which are generated and displayed on density maps, can be used in a multiparameter overlay process to identify preferable siting areas. The assessment of clustered facilities in energy centers is also possible within the SITE analysis framework. An application of the SITE methodology to Northern Illinois is presented. Also included is a description of the ongoing extension of SITE for the accumulative evaluation of alternative regional energy siting patterns and fuel cycle options. An appendix provides documentation and user information for the SITE computer program

  9. MODIFIED APPROACH FOR SITE SELECTION OF UNWANTED RADIOACTIVE SEALED SOURCES DISPOSAL IN ARID COUNTRIES (CASE STUDY - EGYPT)

    International Nuclear Information System (INIS)

    ABDEL AZIZ, M.A.H.; COCHRAN, J.R.

    2008-01-01

    The aim of this study is to present a systematic methodology for siting of radioactive sealed sources disposal in arid countries and demonstrate the use of this methodology in Egypt. Availing from the experience gained from the greater confinement disposal (GCD) boreholes in Nevada, USA, the IAEA's approach for siting of near disposal was modified to fit the siting of the borehole disposal which suits the unwanted radioactive sealed sources. The modifications are represented by dividing the surveyed area into three phases; the exclusion phase in which the areas that meet exclusion criteria should be excluded, the site selection phase in which some potential sites that meet the primary criteria should be candidate and the preference stage in which the preference between the potential candidate sites should be carried out based on secondary criteria to select one or two sites at most. In Egypt, a considerable amount of unwanted radioactive sealed sources wastes have accumulated due to the peaceful uses of radio-isotopes.Taking into account the regional aspects and combining of the proposed developed methodology with geographic information system (GIS), the Nile Delta and its valley, the Sinai Peninsula and areas of historical heritage value are excluded from our concern as potential areas for radioactive waste disposal. Using the primary search criteria, some potential sites south Kharga, the Great Sand Sea, Gilf El-Kebear and the central part of the eastern desert have been identified as candidate areas meeting the primary criteria of site selection. More detailed studies should be conducted taking into account the secondary criteria to prefer among the above sites and select one or two sites at most

  10. Site specific information in site selection

    International Nuclear Information System (INIS)

    Aeikaes, T.; Hautojaervi, A.

    1998-01-01

    The programme for the siting of a deep repository for final disposal of spent nuclear fuel was started already in 1983 and is carried out today by Posiva Oy which continues the work started by Teollisuuden Voima Oy. The programme aims at site selection by the end of the year 2000. The programme has progressed in successive interim stages with defined goals. After an early phase for site identification, five sites were selected in 1987 for preliminary site characterisation. Three of these were selected and judged to be best suited for the more detailed characterisation in 1992. An additional new site was included into the programme based on a separate feasibility study in the beginning of 1997. Since the year 1983 several safety assessments together with technical plans of the facility have been completed. When approaching the site selection the needs for more detailed consideration of the site specific properties in the safety assessment have been increased. The Finnish regulator STUK has published a proposal for general safety requirements for the final disposal of spent nuclear fuel in Finland. This set of requirements has been projected to be used in conjunction of the decision making by the end 2000. Based on the site evaluation all sites can provide a stable environment and there is evidence that the requirements for the longevity of the canister can be fulfilled at each site. In this manner the four candidate sites do not differ too much from each other. The main difference between the sites is in the salinity of the deep groundwater. The significance of differences in the salinity for the long-term safety cannot be defined yet. The differences may contribute to the discussion of the longevity of the bentonite buffer and also to the modelling of the groundwater flow and transport. The use of the geosphere as a transport barrier is basically culminated on the questions about sparse but fast flow routes and 'how bad channeling can be'. To answer these questions

  11. Site selection

    CERN Multimedia

    CERN PhotoLab

    1968-01-01

    To help resolve the problem of site selection for the proposed 300 GeV machine, the Council selected "three wise men" (left to right, J H Bannier of the Netherlands, A Chavanne of Switzerland and L K Boggild of Denmark).

  12. VerSi - A Methodology for a Comparison of Potential Repository Sites

    International Nuclear Information System (INIS)

    Hund, Wilhelm

    2010-09-01

    . VerSi doesn't comprise any geoscientific exploration at a distinct site nor a long-term safety analysis for a distinct site nor a site selection itself. The methodology may be expanded by taking into account the operational phase and the optimization of the disposal concepts

  13. Development of a comprehensive management site evaluation methodology

    International Nuclear Information System (INIS)

    Rodgers, J.C.; Onishi, Y.

    1981-01-01

    The Nuclear Regulatory Commission is in the process of preparing regulations that will define the necessary conditions for adequate disposal of low-level waste (LLW) by confinement in an LLW disposal facility. These proposed regulations form the context in which the motivation for the joint Los Alamos National Laboratory Battelle Pacific Northwest Laboratory program to develop a site-specific, LLW site evaluation methodology is discussed. The overall effort is divided into three development areas: land-use evaluation, environmental transport modelling, and long term scenario development including long-range climatology projections. At the present time four steps are envisioned in the application of the methodology to a site: site land use suitability assessment, land use-ecosystem interaction, contaminant transport simulation, and sensitivity analysis. Each of these steps is discussed in the paper. 12 refs

  14. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    A final report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The applicability of some methods of statistical analysis for discontinuity data is reviewed. The requirement for remote geophysical methods of characterizing the mass is discussed and experiments using seismic and ultrasonic velocity measurements are reported. Methods of determining the in-situ stresses are described and the final results of a programme of in-situ stress measurements using the overcoring and hydrofracture methods are reported. (author)

  15. Nuclear site selection studies

    International Nuclear Information System (INIS)

    Gharib, A.; Zohoorian Izadpanah, A.A.; Iranmanesh, H.

    2000-01-01

    It is of special importance, especially from the nuclear safety viewpoint, to select suitable sites for different nuclear structures with the considered future activities. Site selection sometimes involves high costs not necessarily for merely selecting of site but for some preliminary measures to be taken so as the site may have the necessary characteristics. The more suitable the natural characteristics of the site for the considered project, the more successful and efficient the project, the lower the project costs and the longer the project operation period. If so, the project will cause the growth of public culture and sustainable socioeconomic development. This paper is the result of the conclusion of numerous massive reports of this activity in the preliminary phase based on theories, practices and the related safety principles on this ground as well as the application of data and information of the past and a glance to the future. The conception of need for a site for medium structures and nuclear research projects and how to perform this process are presented step by step here with a scientific approach to its selection during the investigations. In this study, it is practically described how the site is selected, by determining and defining the characteristics of research and nuclear projects with medium structures and also its fitting to the optimum site. The discovered sites typically involve the best advantages in technical and economic aspects and no particular contrast with the concerned structures

  16. Assessment of public acceptability in site selection process. The methodology and the results

    International Nuclear Information System (INIS)

    Zeleznik, N.; Kralj, M.; Polic, M.; Kos, D.; Pek Drapal, D.

    2005-01-01

    The site selection process for the low and intermediate radioactive waste (LILW) repository in Slovenia follows the mixed mode approach according to the model proposed by IAEA. After finishing the conceptual and planning stage in 1999, and after identification of the potentially suitable areas in the area survey stage in 2001, ARAO (Agency for radwaste management) invited all municipalities to volunteer in the procedure of placing the LILW repository in the physical environment. A positive response was received from eight municipalities, though three municipalities later resigned from it. A selection between twelve locations in these five municipalities had to be done because Slovenian procedure provides for only three locations to be further evaluated in the stage of identification of potentially suitable sites. A pre-feasibility study of the public acceptability, together with the technical aspects (safety, technical functionality, economic, environmental and spatial aspects) was performed. The aspect of public acceptability included objective and subjective evaluation criteria. The former included information obtained from studies of demography, data on local economy, infrastructure and eventual environmental problems, media analysis, and earlier public opinion polls. The latter included data obtained from topical workshops, free phone line, telephone interviews with the general public and personal interviews with representatives of decision makers and public opinion leaders, as well as a public opinion poll in all included communities. Evaluated municipalities were ranked regarding their social suitability for the radioactive waste site. (author)

  17. Methodology to remediate a mixed waste site

    International Nuclear Information System (INIS)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ''lessons learned'' from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors

  18. Methodology to remediate a mixed waste site

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ``lessons learned`` from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors.

  19. Methodology for Selecting Initiating Events and Hazards for Consideration in an Extended PSA

    International Nuclear Information System (INIS)

    Wielenberg, A.; Hage, M.; Loeffler, H.; Alzbutas, R.; Apostol, M.; Bareith, A.; Siklossy, T.; Brac, P.; Burgazzi, L.; Cazzoli, E.; Vitazkova, J.; Cizelj, L.; Prosek, A.; Volkanovski, A.; Hashimoto, K.; Godefroy, F.; Gonzalez, M.; Groudev, P.; Kolar, L.; Kumar, M.; Nitoi, M.; Raimond, E.

    2016-01-01

    An extended PSA applies to a site of one or several Nuclear Power Plant unit(s) and its environment. It intends to calculate the risk induced by the main sources of radioactivity (reactor core and spent fuel storages) on the site, taking into account all operating states for each main source and all possible relevant accident initiating events (both internal and external) affecting one unit or the whole site. The combination between hazards or initiating events and their impact on a unit or the whole site is a crucial issue for an extended PSA. The report tries to discuss relevant methodologies for this purpose. The report proposes a methodology to select initiating events and hazards for the development of an extended PSA. The proposed methodology for initiating events identification, screening and bounding analysis for an extended PSA consists of four major steps: 1. A comprehensive identification of events and hazards and their respective combinations applicable to the plant and site. Qualitative screening criteria will be applied, 2. The calculation of initial (possibly conservative) frequency claims for events and hazards and their respective combinations applicable to the plant and the site. Quantitative screening criteria will be applied, 3. An impact analysis and bounding assessment for all applicable events and scenarios. Events are either screened out from further more detailed analysis, or are assigned to a bounding event (group), or are retained for detailed analysis, 4. The probabilistic analysis of all retained (bounding) events at the appropriate level of detail. (authors)

  20. Communication: Site-selective bond excision of adenine upon electron transfer

    Science.gov (United States)

    Cunha, T.; Mendes, M.; Ferreira da Silva, F.; Eden, S.; García, G.; Limão-Vieira, P.

    2018-01-01

    This work demonstrates that selective excision of hydrogen atoms at a particular site of the DNA base adenine can be achieved in collisions with electronegative atoms by controlling the impact energy. The result is based on analysing the time-of-flight mass spectra yields of potassium collisions with a series of labeled adenine derivatives. The production of dehydrogenated parent anions is consistent with neutral H loss either from selective breaking of C-H or N-H bonds. These unprecedented results open up a new methodology in charge transfer collisions that can initiate selective reactivity as a key process in chemical reactions that are dominant in different areas of science and technology.

  1. Studies on site characterization methodologies for high level radioactive waste disposal

    International Nuclear Information System (INIS)

    Wang Ju; Guo Yonghai; Chen Weiming

    2008-01-01

    This paper presents the final achievement of the project 'Studies of Site-specific Geological Environment for High Level Waste Disposal and Performance Assessment Methodology, Part Ⅰ: Studies on Site Characterization Methodologies for High Level Radioactive Waste Disposal', which is a 'Key Scientific and Technological Pre-Research Project for National Defense' during 2001-2005. The study area is Beishan area, Gansu Province, NW China--the most potential site for China's underground research laboratory and high level radioactive waste repository. The boreholes BS01, BS2, BS03 and BS04 drilled in fractured granite media in Beishan are used to conduct comprehensive studies on site characterization methodologies, including: bore hole drilling method, in situ measurement methods of hydrogeological parameters, underground water sampling technology, hydrogeochemical logging method, geo-stress measurement method, acoustic borehole televiewer measurement method, borehole radar measurement method, fault stability evaluation methods and rock joint evaluation method. The execution of the project has resulted in the establishment of an 'Integrated Methodological System for Site Characterization in Granite Site for High Level Radioactive Waste Repository' and the 8 key methodologies for site characterization: bore hole drilling method with minimum disturbance to rock mass, measurement method for hydrogeological parameters of fracture granite mass, in situ groundwater sampling methods from bore holes in fractured granite mass, fracture measurement methods by borehole televiewer and bore radar system, hydrogeochemical logging, low permeability measurement methods, geophysical methods for rock mass evaluation, modeling methods for rock joints. Those methods are comprehensive, advanced, innovative, practical, reliable and of high accuracy. The comprehensive utilization of those methods in granite mass will help to obtain systematic parameters of

  2. AEGIS methodology and a perspective from AEGIS methodology demonstrations

    International Nuclear Information System (INIS)

    Dove, F.H.

    1981-03-01

    Objectives of AEGIS (Assessment of Effectiveness of Geologic Isolation Systems) are to develop the capabilities needed to assess the post-closure safety of waste isolation in geologic formation; demonstrate these capabilities on reference sites; apply the assessment methodology to assist the NWTS program in site selection, waste package and repository design; and perform repository site analyses for the licensing needs of NWTS. This paper summarizes the AEGIS methodology, the experience gained from methodology demonstrations, and provides an overview in the following areas: estimation of the response of a repository to perturbing geologic and hydrologic events; estimation of the transport of radionuclides from a repository to man; and assessment of uncertainties

  3. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    The reports comprising this volume concern the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in granites in Cornwall, with particular reference to the effect of structures imposed by discontinuities on the engineering behaviour of rock masses. The topics covered are: in-situ stress measurements using (a) the hydraulic fracturing method, or (b) the US Bureau of Mines deformation probe; scanline discontinuity survey - coding form and instructions, and data; applicability of geostatistical estimation methods to scalar rock properties; comments on in-situ stress at the Carwynnen test mine and the state of stress in the British Isles. (U.K.)

  4. Study for the selection of optimal site in northeastern, Mexico for wind power generation using genetic algorithms.

    Science.gov (United States)

    Gonzalez, T.; Ruvalcaba, A.; Oliver, L.

    2016-12-01

    The electricity generation from renewable resources has acquired a leading role. Mexico particularrly it has great interest in renewable natural resources for power generation, especially wind energy. Therefore, the country is rapidly entering in the development of wind power generators sites. The development of a wind places as an energy project, does not have a standardized methodology. Techniques vary according to the developer to select the best place to install a wind turbine system. Generally to install the system the developers consider three key factors: 1) the characteristics of the wind, 2) the potential distribution of electricity and 3) transport access to the site. This paper presents a study with a different methodology which is carried out in two stages: the first at regional scale uses "space" and "natural" criteria in order to select a region based on its cartographic features such as politics and physiographic division, location of conservation natural areas, water bodies, urban criteria; and natural criteria such as the amount and direction of the wind, the type and land use, vegetation, topography and biodiversity of the site. The result of the application of these criteria, gives a first optimal selection area. The second part of the methodology includes criteria and variables on detail scale. The analysis of all data information collected will provide new parameters (decision variables) for the site. The overall analysis of the information, based in these criteria, indicates that the best location that the best location of the field would be the southern Coahuila and the central part of Nuevo Leon. The wind power site will contribute to the economy grow of important cities including Monterrey. Finally, computational model of genetic algorithm will be used as a tool to determine the best site selection depending on the parameters considered.

  5. Transshipment site selection using the AHP and TOPSIS approaches under fuzzy environment

    International Nuclear Information System (INIS)

    Onuet, Semih; Soner, Selin

    2008-01-01

    Site selection is an important issue in waste management. Selection of the appropriate solid waste site requires consideration of multiple alternative solutions and evaluation criteria because of system complexity. Evaluation procedures involve several objectives, and it is often necessary to compromise among possibly conflicting tangible and intangible factors. For these reasons, multiple criteria decision-making (MCDM) has been found to be a useful approach to solve this kind of problem. Different MCDM models have been applied to solve this problem. But most of them are basically mathematical and ignore qualitative and often subjective considerations. It is easier for a decision-maker to describe a value for an alternative by using linguistic terms. In the fuzzy-based method, the rating of each alternative is described using linguistic terms, which can also be expressed as triangular fuzzy numbers. Furthermore, there have not been any studies focused on the site selection in waste management using both fuzzy TOPSIS (technique for order preference by similarity to ideal solution) and AHP (analytical hierarchy process) techniques. In this paper, a fuzzy TOPSIS based methodology is applied to solve the solid waste transshipment site selection problem in Istanbul, Turkey. The criteria weights are calculated by using the AHP

  6. Site selection

    International Nuclear Information System (INIS)

    Olsen, C.W.

    1983-07-01

    The conditions and criteria for selecting a site for a nuclear weapons test at the Nevada Test Site are summarized. Factors considered are: (1) scheduling of drill rigs, (2) scheduling of site preparation (dirt work, auger hole, surface casing, cementing), (3) schedule of event (when are drill hole data needed), (4) depth range of proposed W.P., (5) geologic structure (faults, Pz contact, etc.), (6) stratigraphy (alluvium, location of Grouse Canyon Tuff, etc.), (7) material properties (particularly montmorillonite and CO 2 content), (8) water table depth, (9) potential drilling problems (caving), (10) adjacent collapse craters and chimneys, (11) adjacent expended but uncollapsed sites, (12) adjacent post-shot or other small diameter holes, (13) adjacent stockpile emplacement holes, (14) adjacent planned events (including LANL), (15) projected needs of Test Program for various DOB's and operational separations, and (16) optimal use of NTS real estate

  7. Selection methodology for LWR safety programs and proposals. Volume 2. Methodology application

    International Nuclear Information System (INIS)

    Ritzman, R.L.; Husseiny, A.A.

    1980-08-01

    The results of work done to update and apply a methodology for selecting (prioritizing) LWR safety technology R and D programs are described. The methodology is based on multiattribute utility (MAU) theory. Application of the methodology to rank-order a group of specific R and D programs included development of a complete set of attribute utility functions, specification of individual attribute scaling constants, and refinement and use of an interactive computer program (MAUP) to process decision-maker inputs and generate overall (multiattribute) program utility values. The output results from several decision-makers are examined for consistency and conclusions and recommendations regarding general use of the methodology are presented. 3 figures, 18 tables

  8. Methodology for determining acceptable residual radioactive contamination levels at decommissioned nuclear facilities/sites

    International Nuclear Information System (INIS)

    Watson, E.C.; Kennedy, W.E. Jr.; Hoenes, G.R.; Waite, D.A.

    1979-01-01

    The ultimate disposition of decommissioned nuclear facilities and their surrrounding sites depends upon the degree and type of residual contamination. Examination of existing guidelines and regulations has led to the conclusion that there is a need for a general method to derive residual radioactive contamination levels that are acceptable for public use of any decommissioned nuclear facility or site. This paper describes a methodology for determining acceptable residual radioactive contamination levels based on the concept of limiting the annual dose to members of the public. It is not the purpose of this paper to recommend or even propose dose limits for the exposure of the public to residual radioactive contamination left at decommissioned nuclear facilities or sites. Unrestricted release of facilities and/or land is based on the premise that the potential annual dose to any member of the public using this property from all possible exposure pathways will not exceed appropriate limits as may be defined by Federal regulatory agencies. For decommissioned land areas, consideration should be given to people living directly on previously contaminated areas, growing crops, grazing food animals and using well water. Mixtures of radionuclides in the residual contamination representative of fuel reprocessing plants, light water reactors and their respective sites are presented. These mixtures are then used to demonstrate the methodology. Example acceptable residual radioactive contamination levels, based on an assumed maximum annual dose of one millirem, are calculated for several selected times following shutdown of a facility. It is concluded that the methodology presented in this paper results in defensible acceptable residual contamination levels that are directly relatable to risk assessment with the proviso that an acceptable limit to the maximum annual dose will be established. (author)

  9. Methodology of site selection for solid municipal waste disposal plants; Metodologia per la localizzazione sul territorio di aree ambientalmente compatibili con impianti di smaltimento rifiuti

    Energy Technology Data Exchange (ETDEWEB)

    Tassoni, E; Cautilli, F; Polizzano, C; Andriola, L [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente

    1997-09-01

    The selection of suitable areas for solid municipal waste disposal plants has a notable importance in relation to the problems linked to the solid municipal waste management. The knowledge of the territory constitutes the fundamental base for the selection of compatible areas, from an environmental point of view. The method developed by ENEA (1995) and applied to the Latina territory (Central Italy) preliminary considers an accurate bibliographic and cartographic search, relative to the geological, presently, hydrogeological characteristics and the use constraints of the territory. The selection of suitable areas has been carried out on the ground of the following criteria: - selection of potentially suitable large areas, carried out overlaying thematic maps (geological, geomorphological, etc.) elaborated for all the examined territory; - selection of ``exclusion`` areas on the ground of use constraints, such as residential areas, water protection zones and so on. At the end of the proceeding phases other main points with territorial and socioeconomic significance have been examined and represented on thematic maps. Because the selected areas have resulted too numerous, it has been necessary to utilize methods to get environmental comparative evaluations of the areas in relation to the solid municipal waste disposal plants. A method, developed by ENEA (1994) and based on the calculus of the ``impacts matrix`` has been used. The application of the described method has allowed to find out the areas with the best degree of compatibility, which could be defined ``first priority`` areas for the final choice of the plants site. The aforesaid classification allows the Local Administrators to select the site in a scientifically correct way, on the ground of the evaluation of environmental characteristics above indicated and of a cost-benefit balance; this latter is presently not included among the objectives of the methodology.

  10. A new methodology for repository site suitability evaluation

    International Nuclear Information System (INIS)

    Miller, I.; Kossik, R.; Cunnane, M.

    1992-01-01

    Golder Associates Inc. (GAI) has developed a probabilistic total system performance assessment and strategy evaluation model (RIP) which can be applied in an iterative manner to evaluate repository site suitability and guide site characterization. The major portion of the software is the performance assessment model, which consists of a series of coupled component models for radionuclide transfer. The performance model itself is embedded within a decision analysis model which allows the user to evaluate alternative site characterization strategies. This paper provides an overview of the methodology, and summarizes the basic concepts of RIP

  11. Systems selection methodology for civil nuclear power applications

    International Nuclear Information System (INIS)

    Scarborough, J.

    1988-01-01

    A methodology for evaluation and selection of a preferred Advanced Small or Medium Power Reactor (SMPR) for commercial electric power generation is discussed, and an illustrative example is presented with five US Advanced SMPR power plants. The evaluation procedure was developed from a methodology for ranking small, advanced nuclear power plant designs under development by the US Department of Energy (DOE) and Department of Defense (DOD). The methodology involves establishing numerical probability distributions for each of fifteen evaluation criteria for each Advanced SMPR plant. A resultant single probability distribution with its associated numerical mean value is then developed for each Advanced SMPR plant by Monte Carlo sampling techniques in order that each plant may be ranked with an associated statement of certainty. The selection methodology is intended as a screening procedure for commercial offerings to preclude detailed technical and commercial assessments from being conducted for those offerings which do not meet the initial screening criteria

  12. Systems selection methodology for civil nuclear power applications

    International Nuclear Information System (INIS)

    Scarborough, J.C.

    1987-01-01

    A methodology for evaluation and selection of a preferred Advanced Small or Medium Power Reactor (SMPR) for commercial electric power generation is discussed, and an illustrative example is presented with five U.S. Advanced SMPR power plants. The evaluation procedure was developed from a methodology for ranking small. advenced nuclear power plant designs under development by the U.S. Department of Energy (DOE) and Department of Defense (DOD). The methodology involves establishing numerical probability distributions for each of fifteen evaluation criteria for each Advanced SMPR plant. A resultant single probability distribution with its associated numerical mean value is then developed for each Advanced SMPR plant by Monte Carlo sampling techniques in order that each plant may be ranked with an associated statement of certainty. The selection methodology is intended as a screening procedure for commercial offerings to preclude detailed technical and commercial assessments from being conducted for those offerings which do not meet the initial screening criteria. (auhtor)

  13. Methodology for ranking restoration options

    DEFF Research Database (Denmark)

    Jensen, Per Hedemann

    1999-01-01

    techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps:-characterisation of relevant contaminated sites -identication and characterisation of relevant restoration...... techniques -assessment of the radiological impact -development and application of a selection methodology for restoration options -formulation ofgeneric conclusions and development of a manual The project is intended to apply to situations in which sites with nuclear installations have been contaminated...

  14. ITER site selection studies in Spain

    International Nuclear Information System (INIS)

    Medrano, M.; Alejaldre, C.; Doncel, J.; Garcia, A.; Ibarra, A.; Jimenez, J.A.; Sanchez de Mora, M.A.; Alcala, F.; Diez, J.E.; Dominguez, M.; Albisu, F.

    2003-01-01

    The studies carried out to evaluate and select a candidate site for International Thermonuclear Experimental Reactor (ITER) construction in Spain are presented in this paper. The ITER design, completed in July 2001, considered a number of technical requirements that must be fulfilled by the selected site. Several assumptions concerning the ITER site were made in order to carry on the design before final site selection. In the studies undertaken for ITER site selection in Spain, the referred technical requirements and assumptions were applied across the whole of Spain and two areas were identified as being preferential. These areas are on the Mediterranean coast and are situated in the Catalan and Valencian regions. A comparative evaluation based on technical characteristics for the concrete plots, proposed within the preferential areas, has been done. The result of these studies was the selection of a site that was deemed to be the most competitive--Vandellos (Tarragona)--and it was proposed to the European Commission for detailed studies in order to be considered as a possible European site for ITER construction. Another key factor for hosting ITER in Spain, is the licensing process. The present status is summarised in this paper

  15. U.S. Department of Energy's site screening, site selection, and initial characterization for storage of CO2 in deep geological formations

    Science.gov (United States)

    Rodosta, T.D.; Litynski, J.T.; Plasynski, S.I.; Hickman, S.; Frailey, S.; Myer, L.

    2011-01-01

    The U.S. Department of Energy (DOE) is the lead Federal agency for the development and deployment of carbon sequestration technologies. As part of its mission to facilitate technology transfer and develop guidelines from lessons learned, DOE is developing a series of best practice manuals (BPMs) for carbon capture and storage (CCS). The "Site Screening, Site Selection, and Initial Characterization for Storage of CO2 in Deep Geological Formations" BPM is a compilation of best practices and includes flowchart diagrams illustrating the general decision making process for Site Screening, Site Selection, and Initial Characterization. The BPM integrates the knowledge gained from various programmatic efforts, with particular emphasis on the Characterization Phase through pilot-scale CO2 injection testing of the Validation Phase of the Regional Carbon Sequestration Partnership (RCSP) Initiative. Key geologic and surface elements that suitable candidate storage sites should possess are identified, along with example Site Screening, Site Selection, and Initial Characterization protocols for large-scale geologic storage projects located across diverse geologic and regional settings. This manual has been written as a working document, establishing a framework and methodology for proper site selection for CO2 geologic storage. This will be useful for future CO2 emitters, transporters, and storage providers. It will also be of use in informing local, regional, state, and national governmental agencies of best practices in proper sequestration site selection. Furthermore, it will educate the inquisitive general public on options and processes for geologic CO2 storage. In addition to providing best practices, the manual presents a geologic storage resource and capacity classification system. The system provides a "standard" to communicate storage and capacity estimates, uncertainty and project development risk, data guidelines and analyses for adequate site characterization, and

  16. Site selection process for radioactive waste repository (radioactive facility) in Cuba as a fundamental safety criteria

    International Nuclear Information System (INIS)

    Vital, Jose Luis Peralta; Castillo, Reinaldo Gil; Chales Suarez, Gustavo; Rodriguez Reyes, Aymee

    1999-01-01

    The paper show the process of search carried out for the selection of the safest site in the National territory, in order to sitting the Facility (Repository) that will disposal the low and intermediate level radioactive wastes, as well as the possible Storage Facility for nuclear spent Fuel (radioactive wastes of high activity). We summarize the obtained Methodology and the Criterions of exclusion adopted for the development of the Process of site selection, as well as the current condition of the researches that will permit the obtaining of the nominative objectives. (author)

  17. Selection of Inhibitor-Resistant Viral Potassium Channels Identifies a Selectivity Filter Site that Affects Barium and Amantadine Block

    Science.gov (United States)

    Fujiwara, Yuichiro; Arrigoni, Cristina; Domigan, Courtney; Ferrara, Giuseppina; Pantoja, Carlos; Thiel, Gerhard; Moroni, Anna; Minor, Daniel L.

    2009-01-01

    Background Understanding the interactions between ion channels and blockers remains an important goal that has implications for delineating the basic mechanisms of ion channel function and for the discovery and development of ion channel directed drugs. Methodology/Principal Findings We used genetic selection methods to probe the interaction of two ion channel blockers, barium and amantadine, with the miniature viral potassium channel Kcv. Selection for Kcv mutants that were resistant to either blocker identified a mutant bearing multiple changes that was resistant to both. Implementation of a PCR shuffling and backcrossing procedure uncovered that the blocker resistance could be attributed to a single change, T63S, at a position that is likely to form the binding site for the inner ion in the selectivity filter (site 4). A combination of electrophysiological and biochemical assays revealed a distinct difference in the ability of the mutant channel to interact with the blockers. Studies of the analogous mutation in the mammalian inward rectifier Kir2.1 show that the T→S mutation affects barium block as well as the stability of the conductive state. Comparison of the effects of similar barium resistant mutations in Kcv and Kir2.1 shows that neighboring amino acids in the Kcv selectivity filter affect blocker binding. Conclusions/Significance The data support the idea that permeant ions have an integral role in stabilizing potassium channel structure, suggest that both barium and amantadine act at a similar site, and demonstrate how genetic selections can be used to map blocker binding sites and reveal mechanistic features. PMID:19834614

  18. Decarboxylative alkylation for site-selective bioconjugation of native proteins via oxidation potentials

    Science.gov (United States)

    Bloom, Steven; Liu, Chun; Kölmel, Dominik K.; Qiao, Jennifer X.; Zhang, Yong; Poss, Michael A.; Ewing, William R.; MacMillan, David W. C.

    2018-02-01

    The advent of antibody-drug conjugates as pharmaceuticals has fuelled a need for reliable methods of site-selective protein modification that furnish homogeneous adducts. Although bioorthogonal methods that use engineered amino acids often provide an elegant solution to the question of selective functionalization, achieving homogeneity using native amino acids remains a challenge. Here, we explore visible-light-mediated single-electron transfer as a mechanism towards enabling site- and chemoselective bioconjugation. Specifically, we demonstrate the use of photoredox catalysis as a platform to selectivity wherein the discrepancy in oxidation potentials between internal versus C-terminal carboxylates can be exploited towards obtaining C-terminal functionalization exclusively. This oxidation potential-gated technology is amenable to endogenous peptides and has been successfully demonstrated on the protein insulin. As a fundamentally new approach to bioconjugation this methodology provides a blueprint toward the development of photoredox catalysis as a generic platform to target other redox-active side chains for native conjugation.

  19. Decarboxylative alkylation for site-selective bioconjugation of native proteins via oxidation potentials.

    Science.gov (United States)

    Bloom, Steven; Liu, Chun; Kölmel, Dominik K; Qiao, Jennifer X; Zhang, Yong; Poss, Michael A; Ewing, William R; MacMillan, David W C

    2018-02-01

    The advent of antibody-drug conjugates as pharmaceuticals has fuelled a need for reliable methods of site-selective protein modification that furnish homogeneous adducts. Although bioorthogonal methods that use engineered amino acids often provide an elegant solution to the question of selective functionalization, achieving homogeneity using native amino acids remains a challenge. Here, we explore visible-light-mediated single-electron transfer as a mechanism towards enabling site- and chemoselective bioconjugation. Specifically, we demonstrate the use of photoredox catalysis as a platform to selectivity wherein the discrepancy in oxidation potentials between internal versus C-terminal carboxylates can be exploited towards obtaining C-terminal functionalization exclusively. This oxidation potential-gated technology is amenable to endogenous peptides and has been successfully demonstrated on the protein insulin. As a fundamentally new approach to bioconjugation this methodology provides a blueprint toward the development of photoredox catalysis as a generic platform to target other redox-active side chains for native conjugation.

  20. A pragmatic pairwise group-decision method for selection of sites for nuclear power plants

    International Nuclear Information System (INIS)

    Kutbi, I.I.

    1987-01-01

    A pragmatic pairwise group-decision approach is applied to compare two regions in order to select the more suitable one for construction of nulcear power plants in the Kingdom of Saudi Arabia. The selection methodology is based on pairwise comparison by forced choice. The method facilitates rating of the regions or sites using simple calculations. Two regions, one close to Dhahran on the Arabian Gulf and another close to Jeddah on the Red Sea, are evaluated. No specific site in either region is considered at this stage. The comparison is based on a set of selection criteria which include (i) topography, (ii) geology, (iii) seismology, (iv) meteorology, (v) oceanography, (vi) hydrology and (vii) proximetry to oil and gas fields. The comparison shows that the Jeddah region is more suitable than the Dhahran region. (orig.)

  1. Development of site selection process for an LILW repository in Slovenia

    International Nuclear Information System (INIS)

    Zeleznik, N.; Kralj, M.; Mele, I.; Veselic, M.

    2005-01-01

    The activities regarding the LILW repository site selection in Slovenia are planned to meet the requirements of the Act on Ionising Radiation Protection and Nuclear Safety, especially the requirement that the site for a repository should be selected by 2008 and the repository should be in operation by 2013. In November 2004, the official administrative procedure for the siting of the repository started with the first spatial public conference on spatial planning procedure. It was carried out by the Ministry of the Environment and Spatial Planning and ARAO. Immediately after the conference the Program for the preparation of the detailed plan of national importance for the LILW repository was accepted by the Ministry. At the beginning of December 2004, ARAO invited all Slovenian local communities to participate in the site selection process and volunteer a site or area in their local community for further investigation. At the beginning of April 2005 the first phase of the bidding process was concluded. ARAO received applications from eight local communities. A pre-feasibility study to define three of the most promising locations was conducted because only three locations are foreseen by the Program for the preparation of the detailed plan of national importance. Methodologies were prepared for assessment of different parameters of technical, financial, environmental and spatial suitability as well as public acceptability. Comparative, preferential and also exclusion criteria for the respective parameters were defined. The results of the cabinet and fieldwork research were compared and further assessed in order to obtain maximum three local communities with three potential sites in which the probability of siting the LILW repository seems to be the highest. Detailed plans of national importance will be prepared for these sites. (author)

  2. A case on vendor selection methodology: An integrated approach

    Directory of Open Access Journals (Sweden)

    Nikhil C. Shil

    2009-11-01

    Full Text Available Vendor selection methodology is a highly researched area in supply chain management l terature and a very significant decision taken by supply chain managers due to technological advances in the manufacturing process. Such research has two basic dimensions: one is related to the identification of variables affecting the performance of the vendors and the other deals with the methodology to be applied. Most of the research conducted in this area deal with the upfront selection of vendors. However, it is very common to have a list of dedicated vendors due to the development of sophisticated production technologies like just in time (JIT, a lean or agile manufacturing process where continuous flow of materials is a requirement. This paper addresses the issue of selecting the optimal vendor from the internal database of a company. Factor analysis, analytical hierarchy process and regression analysis is used in an integrated way to supplement the vendor selection process. The methodology presented here is simply a proposal where every possible room for adjustment is available.

  3. A neural network based methodology to predict site-specific spectral acceleration values

    Science.gov (United States)

    Kamatchi, P.; Rajasankar, J.; Ramana, G. V.; Nagpal, A. K.

    2010-12-01

    A general neural network based methodology that has the potential to replace the computationally-intensive site-specific seismic analysis of structures is proposed in this paper. The basic framework of the methodology consists of a feed forward back propagation neural network algorithm with one hidden layer to represent the seismic potential of a region and soil amplification effects. The methodology is implemented and verified with parameters corresponding to Delhi city in India. For this purpose, strong ground motions are generated at bedrock level for a chosen site in Delhi due to earthquakes considered to originate from the central seismic gap of the Himalayan belt using necessary geological as well as geotechnical data. Surface level ground motions and corresponding site-specific response spectra are obtained by using a one-dimensional equivalent linear wave propagation model. Spectral acceleration values are considered as a target parameter to verify the performance of the methodology. Numerical studies carried out to validate the proposed methodology show that the errors in predicted spectral acceleration values are within acceptable limits for design purposes. The methodology is general in the sense that it can be applied to other seismically vulnerable regions and also can be updated by including more parameters depending on the state-of-the-art in the subject.

  4. Site study plan for geochemical analytical requirements and methodologies: Revision 1

    International Nuclear Information System (INIS)

    1987-12-01

    This site study plan documents the analytical methodologies and procedures that will be used to analyze geochemically the rock and fluid samples collected during Site Characterization. Information relating to the quality aspects of these analyses is also provided, where available. Most of the proposed analytical procedures have been used previously on the program and are sufficiently sensitive to yield high-quality analyses. In a few cases improvements in analytical methodology (e.g., greater sensitivity, fewer interferences) are desired. Suggested improvements to these methodologies are discussed. In most cases these method-development activities have already been initiated. The primary source of rock and fluid samples for geochemical analysis during Site Characterization will be the drilling program, as described in various SRP Site Study Plans. The Salt Repository Project (SRP) Networks specify the schedule under which the program will operate. Drilling will not begin until after site ground water baseline conditions have been established. The Technical Field Services Contractor (TFSC) is responsible for conducting the field program of drilling and testing. Samples and data will be handled and reported in accordance with established SRP procedures. A quality assurance program will be utilized to assure that activities affecting quality are performed correctly and that the appropriate documentation is maintained. 28 refs., 9 figs., 14 tabs

  5. Technology overview: assessment of social values in thermal power plant siting, social impact methodology evaluation

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    A methodology was developed to facilitate the selection of favorable thermal power plant site and design alternatives from the community perspective. A two-stage, multicriteria decision technique was employed to combine technical assessments of effects of the proposed site/design alternatives with corresponding community values. In the first stage, submodels are used to develop indices of plant impact on each of ten decision criteria. These criteria include effects on aesthetics, water quality, cost of power, air quality, ecology, social quality, local economy, recreational opportunities, cultural resources, and human health and safety. In the second stage, each of the impact indices is weighted by corresponding community values and then summed to provide an overall index of plant acceptability

  6. Developing methodology for description of biosphere evolution at Olkiluoto disposal site utilising forest studies at other land uplift sites

    International Nuclear Information System (INIS)

    Ikondn, A.T.K.; Afo, L.

    2004-01-01

    In Finland, Olkiluoto Island has been selected as the site for final disposal of spent nuclear fuel, in addition to the existing repository for low and intermediate level waste. When creating biosphere models for safety assessments, local main features and processes need to be taken into account. A special characteristic of the site, as well as the coastal area of the Gulf of Bothnia in general, is the land uplift (6-9 mm/a). This continuously exposes new land to soil-formation processes and provides surfaces for colonization by plant communities. The forest vegetation succession on stony, fine-grained till soils starts from deciduous shoreline vegetation and ends in almost pure Norway spruce forests. This has enabled to study ecological and microbiological processes in soils and forests of different developmental stages, to monitor forest condition and the factors affecting it in sites locating close to each other. It has also made possible gradient studies of the succession of boreal mire ecosystems without a need to wait thousands of years. Applying a methodology described in the full paper, a descriptive model on the evolution of the biosphere will be established to indicate possible ecosystem distributions and main characteristics on the area on the basis of above-mentioned studies carried out by Finnish Forest Research Institute, and of results of the site investigations at Olkiluoto. In future, the evolution description will be used as a basis for selection of appropriate ecosystem modules and parameter values in the subsequent coupled assessment model systems. (author)

  7. Investigation of the site selection examples adopted local participation. The site selection processes in Belgium, UK and Switzerland

    International Nuclear Information System (INIS)

    Kageyama, Hitoshi; Suzuki, Shinji; Hirose, Ikuro; Yoshioka, Tatsuji

    2014-06-01

    In late years, local participation policies are being adopted in foreign countries at site selection for the disposal of the radioactive waste. We performed documents investigation about the examples of the site selection processes of Belgium, the U.K., and Switzerland to establish the site selection policy in Japan. In Belgium, after the failure of the site selection for the disposal of short-lived low and intermediate level radioactive waste (LILW) in an early stage, the idea of the local partnership (LP) was developed and three independent LPs were established between the implementing body and each municipality. About 7 years later, one site was decided as the disposal site in the cabinet meeting of the federal government. In the U.K., after the failure of the site selection for the rock characterization facility, the government policy was changed and the consultation process comprised of six phases was started. Though the process had been carried out for over 4 years since one combined partnership was established between the implementing body and the municipalities involved, they had to withdraw from the consulting process because a county council had not accepted that the process would step forward to the 4th phase. In Switzerland, the implementing body selected one site for LILW disposal at an early stage, but the project was denied by the referendum in the Canton having jurisdiction over the site area. After that the Federal Parliament established new Nuclear Energy Act and Nuclear Energy Ordinance precluding the veto of Canton. Now the site selection project is being carried out according to the process comprised of three phases with local participation policy. Reviewing the merits and demerits of each example through this investigation, we confirmed if we are to adopt local participation policy in our country in future, further prudent study would be necessary, considering current and future social conditions in Japan. (author)

  8. Modelling of nuclide migration for support of the site selection for near surface repository in Lithuania

    International Nuclear Information System (INIS)

    Kilda, R.; Poskas, P.; Ragaisis, V.

    2006-01-01

    Construction of the near surface repository (NSR) for disposal of short-lived low-and intermediate-level waste (LILW) is planned in Lithuania. Reference design of the repository was prepared. Site selection process is going on. Environmental Impact Assessment (EIA) Program and Report were prepared and are under review by regulators. Releases of radionuclides to water pathway and potential human exposure after closure of the NSR have been assessed for support of the site selection for NSR installation. Two candidate sites were taken under consideration. The assessments have been performed following ISAM methodology recommended by IAEA for safety assessments of near surface disposal facilities. The conceptual design of NSR as well as peculiarities of geological and hydro-geological environment relevant to each candidate site is taken into account. The results of the analysis as part of EIA Report are presented in the paper. It is demonstrated that estimated impact of potential radionuclide migration for both candidate sites is below dose constrain established by regulations of Lithuania. (author)

  9. Site selection: Past and present

    International Nuclear Information System (INIS)

    Tilford, N.R.

    1994-01-01

    Site selection has been going on since the earliest times. The process has evolved through the Industrial Revolution to the present period of exploding population and environmental awareness. Now the work must be done both with increasing sophistication and greater transparency. Modern techniques for site selection have been developed during the last two decades or so, utilizing a teachable body of knowledge and a growing literature. Many firms and individuals have contributed to this growing field. The driving force has been the need for such a process in siting and licensing of critical facilities such as nuclear power plants. A list of crucial, documented steps for identifying social impacts and acceptability are provided. A recent innovation is the self-selection method developed by government. The Superconducting Supercollider serves as an example of this approach. Geological or geologically dependent factors often dominate the process. The role as engineering and environmental geoscientists is to provide responsible leadership, consultation, and communication to the effort

  10. Site Selection for Surplus Plutonium Disposition Facilities at the Savannah River Site

    International Nuclear Information System (INIS)

    Wike, L.D.

    2000-01-01

    A site selection study was conducted to evaluate locations for the proposed Surplus Plutonium Disposition Facilities. Facilities to be located include the Mixed Oxide (MOX) Fuel Fabrication Facility, the Pit Disassembly and Conversion Facility (PDCF), and the Plutonium Immobilization Project (PIP) facility. Objectives of the study include: (1) Confirm that the Department of Energy (DOE) selected locations for the MOX and PDCF were suitable based on selected siting criteria, (2) Recommend a site in the vicinity of F Area that is suitable for the PIP, and (3) Identify alternative suitable sites for one or more of these facilities in the event that further geotechnical characterization or other considerations result in disqualification of a currently proposed site

  11. Decision Making on Regional Landfill Site Selection in Hormozgan Province Using Smce

    Science.gov (United States)

    Majedi, A. S.; Kamali, B. M.; Maghsoudi, R.

    2015-12-01

    Landfill site selection and suitable conditions to bury hazardous wastes are among the most critical issues in modern societies. Taking several factors and limitations into account along with true decision making requires application of different decision techniques. To this end, current paper aims to make decisions about regional landfill site selection in Hormozgan province and utilizes SMCE technique combined with qualitative and quantitative criteria to select the final alternatives. To this respect, we first will describe the existing environmental situation in our study area and set the goals of our study in the framework of SMCE and will analyze the effective factors in regional landfill site selection. Then, methodological procedure of research was conducted using Delphi approach and questionnaires (in order to determine research validity, Chronbach Alpha (0.94) method was used). Spatial multi-criteria analysis model was designed in the form of criteria tree in SMCE using IL WIS software. Prioritization of respective spatial alternatives included: Bandar Abbas city with total 4 spatial alternatives (one zone with 1st priority, one zone with 3rd priority and two zones with 4thpriority) was considered the first priority, Bastak city with total 3 spatial alternatives (one zone with 2nd priority, one zone with 3rdpriorit and one zone with 4th priority) was the second priority and Bandar Abbas, Minab, Jask and Haji Abad cities were considered as the third priority.

  12. Methodological guide: management of industrial sites potentially contaminated by radioactive substances

    International Nuclear Information System (INIS)

    2001-01-01

    At the request of the Ministries of Health and the Environment, IPSN is preparing and publishing the first version of the methodological guide devoted to managing industrial sites potentially contaminated by radioactive substances. This guide describes a procedure for defining and choosing strategies for rehabilitating such industrial sites. (author)

  13. Site-conditions map for Portugal based on VS measurements: methodology and final model

    Science.gov (United States)

    Vilanova, Susana; Narciso, João; Carvalho, João; Lopes, Isabel; Quinta Ferreira, Mario; Moura, Rui; Borges, José; Nemser, Eliza; Pinto, carlos

    2017-04-01

    In this paper we present a statistically significant site-condition model for Portugal based on shear-wave velocity (VS) data and surface geology. We also evaluate the performance of commonly used Vs30 proxies based on exogenous data and analyze the implications of using those proxies for calculating site amplification in seismic hazard assessment. The dataset contains 161 Vs profiles acquired in Portugal in the context of research projects, technical reports, academic thesis and academic papers. The methodologies involved in characterizing the Vs structure at the sites in the database include seismic refraction, multichannel analysis of seismic waves and refraction microtremor. Invasive measurements were performed in selected locations in order to compare the Vs profiles obtained from both invasive and non-invasive techniques. In general there was good agreement in the subsurface structure of Vs30 obtained from the different methodologies. The database flat-file includes information on Vs30, surface geology at 1:50.000 and 1:500.000 scales, elevation and topographic slope and based on SRTM30 topographic dataset. The procedure used to develop the site-conditions map is based on a three-step process that includes defining a preliminary set of geological units based on the literature, performing statistical tests to assess whether or not the differences in the distributions of Vs30 are statistically significant, and merging of the geological units accordingly. The dataset was, to some extent, affected by clustering and/or preferential sampling and therefore a declustering algorithm was applied. The final model includes three geological units: 1) Igneous, metamorphic and old (Paleogene and Mesozoic) sedimentary rocks; 2) Neogene and Pleistocene formations, and 3) Holocene formations. The evaluation of proxies indicates that although geological analogues and topographic slope are in general unbiased, the latter shows significant bias for particular geological units and

  14. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application

    International Nuclear Information System (INIS)

    1993-01-01

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation

  15. Site selection for nuclear power plants

    International Nuclear Information System (INIS)

    Ehjchkholz, D.

    1980-01-01

    Problem of NPP site selection in the USA including engineering factors, radiation and environmental protection factors is stated in detail. Floating and underground sites are considered especially. The attention in paid to waste storage and risk criterium in siting [ru

  16. Methodology applied in Cuba for siting, designing, and building a radioactive waste repository under safety conditions

    International Nuclear Information System (INIS)

    Orbera, L.; Peralta, J.L.; Franklin, R.; Gil, R.; Chales, G.; Rodriguez, A.

    1993-01-01

    The work presents the methodology used in Cuba for siting, designing, and building a radioactive waste repository safely. This methodology covers both the technical and socio-economic factors, as well as those of design and construction so as to have a safe siting for this kind of repository under Cuba especial condition. Applying this methodology will results in a safe repository

  17. Nuclear Power Plant project site selection geotechnical considerations

    International Nuclear Information System (INIS)

    Katti, V.J.; Banerjee, D.C.

    1997-01-01

    During the selection of a site for Nuclear Power Plant (NPP) and Radioactive Waste Plant (RWP), geotechnical investigations play a significant role in deciding merits and demerits of the sites. Any accidents in these units can play havoc on mankind and may leave bitter imprints on generations to come. Hence proper care has to be taken at the early stage for selecting the sites. Site selection procedure is a complicated one, because it involves experts from various disciplines like geology, geophysics, civil, mechanical electrical engineering, health-physics and other fields

  18. Methodology for Mode Selection in Corridor Analysis of Freight Transportation

    OpenAIRE

    Kanafani, Adib

    1984-01-01

    The purpose of tins report is to outline a methodology for the analysis of mode selection in freight transportation. This methodology is intended to partake of transportation corridor analysts, a component of demand analysis that is part of a national transportation process. The methodological framework presented here provides a basis on which specific models and calculation procedures might be developed. It also provides a basis for the development of a data management system suitable for co...

  19. SITE-94. Scenario development FEP audit list preparation: methodology and presentation

    International Nuclear Information System (INIS)

    Stenhouse, M.; Chapman, N.; Sumerling, T.

    1993-04-01

    This report concerns a study which is part of the SKI performance assessment project SITE-94. SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. Other important elements of SITE-94 are the development of a practical and defensible methodology for defining, constructing and analyzing scenarios, the development of approaches for treatment of uncertainties , evaluation of canister integrity, and the development and application of an appropriate quality assurance plan for performance assessments

  20. Performance evaluation of the technical capabilities of DOE sites for disposal of mixed low-level waste: Volume 3, Site evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Waters, R.D.; Gruebel, M.M. [eds.

    1996-03-01

    A team of analysts designed and conducted a performance evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Volume 1 summarizes the process for selecting the fifteen sites, the methodology used in the evaluation, and the conclusions derived from the evaluation. Volume 2 provides details about the site-selection process, the performance-evaluation methodology, and the overall results of the analysis. Volume 3 contains detailed evaluations of the fifteen sites and discussion of the results for each site.

  1. Performance evaluation of the technical capabilities of DOE sites for disposal of mixed low-level waste: Volume 3, Site evaluations

    International Nuclear Information System (INIS)

    Waters, R.D.; Gruebel, M.M.

    1996-03-01

    A team of analysts designed and conducted a performance evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Volume 1 summarizes the process for selecting the fifteen sites, the methodology used in the evaluation, and the conclusions derived from the evaluation. Volume 2 provides details about the site-selection process, the performance-evaluation methodology, and the overall results of the analysis. Volume 3 contains detailed evaluations of the fifteen sites and discussion of the results for each site

  2. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-24

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation.

  3. Participation of concerned citizens in site selection decisions

    International Nuclear Information System (INIS)

    Appel, D.

    2003-01-01

    The contribution presents preliminary results of two international projects aimed at integrating the general public, or parts thereof, in the decision process of selecting ultimate storage sites. The author participated in these projects and is a former member of the task group for selection of ultimate storage sites (Arbeitskreis Auswahlverfahren Endlagerstandorte - AkEnd). The two projects are: Forum on Stakeholder Confidence (FSC) of the Nuclear Energy Agency (NEA) OECD, Project 'COWAM' (Community Waste Management) of the European Commission. The participants, goals and methods of the two projects were different, but they both presented concrete methods of selecting ultimate storage sites from the view of different actors in the form of case studies. The focus was on the participation of the public and its importance for success. Apart from meeting technical requirements the selection process should also take account of the requirements of democracy and citizens' participation in order to gain wide acceptance for its results. Deficiencies and advantages of the proposed selection processes are analyzed, and general requirements on the decision process in site selection are derived. (orig.) [de

  4. Site Selection for the Salt Disposition Facility at the Savannah River Site

    International Nuclear Information System (INIS)

    Gladden, J.B.; Rueter, K.J.; Morin, J.P.

    2000-01-01

    A site selection study was conducted to identify a suitable location for the construction and operation of a new Salt Disposition Facility (SDF) at the Savannah River Site (SRS). The facility to be sited is a single processing facility and support buildings that could house either of three technology alternatives being developed by the High Level Waste Systems Engineering Team: Small Tank Tetraphenylborate Precipitation, Crystalline Silicotitanate Non-Elutable Ion Exchange or Caustic Side Solvent Extraction. A fourth alternative, Direct Disposal in grout, is not part of the site selection study because a location has been identified that is unique to this technology (i.e., Z-Area). Facility site selection at SRS is a formal, documented process that seeks to optimize siting of new facilities with respect to facility-specific engineering requirements, sensitive environmental resources, and applicable regulatory requirements. In this manner, the prime objectives of cost minimization, environmental protection, and regulatory compliance are achieved. The results from this geotechnical characterization indicated that continued consideration be given to Site B for the proposed SDF. Suitable topography, the lack of surface hydrology and floodplain issues, no significant groundwater contamination, the presence of minor soft zones along the northeast portion of footprint, and no apparent geological structure in the Gordon Aquitard support this recommendation

  5. Learning of the subject: Methodology of investigation by means of a Site Web.

    Directory of Open Access Journals (Sweden)

    Yolanda Margarita Carbonell Cabarga

    2010-10-01

    Full Text Available Results of an investigation are presented having as an objective: the design of a Web Site for the learning of Methodology of Investigation subject in Psychology Bachelor of the Municipal University of Sancti Spíritus. This study was carried out in students of psychology career who were facing first year. Methods of the theoretical and empiric level were applied as well as the Mathematical Statistic. In the diagnosis was possible to appreciate the ignorance regarding the use of the methodology in the therorical methodological design of an investigation, also the difficulties in the study of the subject and violations in the application of orientations from the professors at the time of doing the research papers, so an interactive Web Site was obtained and applied which allow the teaching of the subject. The site was validated by means of a quasi-experiment, the obtained information was processed with the use of the statistical inferentia, results were in general highly significant for the feasibility of the proposal.

  6. Site selection under the underground geologic store plan. Procedures of selecting underground geologic stores as disputed by society, science, and politics. Site selection rules

    International Nuclear Information System (INIS)

    Aebersold, M.

    2008-01-01

    The new Nuclear Power Act and the Nuclear Power Ordinance of 2005 are used in Switzerland to select a site of an underground geologic store for radioactive waste in a substantive planning procedure. The ''Underground Geologic Store Substantive Plan'' is to ensure the possibility to build underground geologic stores in an independent, transparent and fair procedure. The Federal Office for Energy (BFE) is the agency responsible for this procedure. The ''Underground Geologic Store'' Substantive Plan comprises these principles: - The long term protection of people and the environment enjoys priority. Aspects of regional planning, economics and society are of secondary importance. - Site selection is based on the waste volumes arising from the five nuclear power plants currently existing in Switzerland. The Substantive Plan is no precedent for or against future nuclear power plants. - A transparent and fair procedure is an indispensable prerequisite for achieving the objectives of a Substantive Plan, i.e., finding accepted sites for underground geologic stores. The Underground Geologic Stores Substantive Plan is arranged in two parts, a conceptual part defining the rules of the selection process, and an implementation part documenting the selection process step by step and, in the end, naming specific sites of underground geologic stores in Switzerland. The objective is to be able to commission underground geologic stores in 25 or 35 years' time. In principle, 2 sites are envisaged, one for low and intermediate level waste, and one for high level waste. The Swiss Federal Council approved the conceptual part on April 2, 2008. This marks the beginning of the implementation phase and the site selection process proper. (orig.)

  7. Interim report - geotechnical site assessment methodology. Vol.1

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1983-05-01

    An interim report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The requirement for remote geophysical methods of characterizing the mass is discussed and initial experiments using seismic and ultrasonic velocity measurements are reported. Computer programs to perform statistical analysis of the discontinuity patterns are described. Overcoring and hydraulic fracturing methods of determining the in-situ stress are briefly described and the results of a programme of in-situ stress measurements using the overcoring method are reported. (author)

  8. Multicriteria decision methodology for selecting technical alternatives in the Mixed Waste Integrated Program

    International Nuclear Information System (INIS)

    Ferrada, J.J.; Berry, J.B.

    1993-11-01

    The US Department of Energy (DOE) Mixed Waste Integrated Program (MWIP) has as one of its tasks the identification of a decision methodology and key decision criteria for the selection methodology. The aim of a multicriteria analysis is to provide an instrument for a systematic evaluation of distinct alternative projects. Determination of this methodology will clarify (1) the factors used to evaluate these alternatives, (2) the evaluator's view of the importance of the factors, and (3) the relative value of each alternative. The selected methodology must consider the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) decision-making criteria for application to the analysis technology subsystems developed by the DOE Office of Technology Development. This report contains a compilation of several decision methodologies developed in various national laboratories, institutions, and universities. The purpose of these methodologies may vary, but the core of the decision attributes are very similar. Six approaches were briefly analyzed; from these six, in addition to recommendations made by the MWIP technical support group leaders and CERCLA, the final decision methodology was extracted. Slight variations are observed in the many methodologies developed by different groups, but most of the analyzed methodologies address similar aspects for the most part. These common aspects were the core of the methodology suggested in this report for use within MWIP for the selection of technologies. The set of criteria compiled and developed for this report have been grouped in five categories: (1) process effectiveness, (2) developmental status, (3) life-cycle cost, (4) implementability, and (5) regulatory compliance

  9. Application of Remote Sensing and GIS in Landfill (waste Disposal) Site Selection and Environmental Impacts Assessment around Mysore City, Karnataka, India

    Science.gov (United States)

    Basavarajappa, T. H.

    2012-07-01

    a suitable methodology was developed. The feasibility of site selection in the study area based on different criteria was used to obtain the layered data by integrating Remote Sensing and GIS. This methodology is suitable for all practical applications in other cities, also.

  10. Site selection - siting of the final repository for spent nuclear fuel

    International Nuclear Information System (INIS)

    2011-03-01

    SKB has selected Forsmark as the site for the final repository for spent nuclear fuel. The site selection is the end result of an extensive siting process that began in the early 1990s. The strategy and plan for the work was based on experience from investigations and development work over a period of more than ten years prior to then. This document describes the siting work and SKB's choice of site for the final repository. It also presents the information on which the choice was based and the reasons for the decisions made along the way. The document comprises Appendix PV to applications under the Nuclear Activities Act and the Environmental Code for licences to build and operate an encapsulation plant adjacent to the central interim storage facility for spent nuclear fuel in Oskarshamn, and to build and operate a final repository for spent nuclear fuel in Forsmark in Oesthammar Municipality

  11. Site selection - siting of the final repository for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    2011-03-15

    SKB has selected Forsmark as the site for the final repository for spent nuclear fuel. The site selection is the end result of an extensive siting process that began in the early 1990s. The strategy and plan for the work was based on experience from investigations and development work over a period of more than ten years prior to then. This document describes the siting work and SKB's choice of site for the final repository. It also presents the information on which the choice was based and the reasons for the decisions made along the way. The document comprises Appendix PV to applications under the Nuclear Activities Act and the Environmental Code for licences to build and operate an encapsulation plant adjacent to the central interim storage facility for spent nuclear fuel in Oskarshamn, and to build and operate a final repository for spent nuclear fuel in Forsmark in Oesthammar Municipality

  12. Draft report: a selection methodology for LWR safety R and D programs and proposals

    International Nuclear Information System (INIS)

    Husseiny, A.A.; Ritzman, R.L.

    1980-03-01

    The results of work done to develop a methodology for selecting LWR safety R and D programs and proposals is described. A critical survey of relevant decision analysis methods is provided including the specifics of multiattribute utility theory. This latter method forms the basis of the developed selection methodology. Details of the methodology and its use are provided along with a sample illustration of its application

  13. Draft report: a selection methodology for LWR safety R and D programs and proposals

    Energy Technology Data Exchange (ETDEWEB)

    Husseiny, A. A.; Ritzman, R. L.

    1980-03-01

    The results of work done to develop a methodology for selecting LWR safety R and D programs and proposals is described. A critical survey of relevant decision analysis methods is provided including the specifics of multiattribute utility theory. This latter method forms the basis of the developed selection methodology. Details of the methodology and its use are provided along with a sample illustration of its application.

  14. A new approach to the LILW repository site selection

    International Nuclear Information System (INIS)

    Mele, I.; Zeleznik, N.

    1998-01-01

    After the failure of site selection, which was performed between 1990-1993, the Agency for Radwaste Management was urged to start a new site selection process for low and intermediate level waste (LILW). Since this is the most sensitive and delicate phase of the whole disposal project extensive analyses of foreign and domestic experiences in siting were performed. Three different models were studied and discussed at a workshop on preparation of the siting procedure for LILW repository. The participants invited to the workshop supported the combined approach, to the site selection, which is presented in this paper.(author)

  15. Nuclear power plant site selection: a case study

    International Nuclear Information System (INIS)

    Lugasi, Y.; Mehrez, A.; Sinuany-Stern, Z.

    1985-01-01

    Selecting the site for a nuclear power plant involves the evaluation of numerous criteria and the professional judgment of various experts. The Israel Atomic Energy Commission has been concerned with the problem of selecting a site for a nuclear power station. Previous studies have been performed by the commission to identify potential sites. There were initial screenings where potential sites were chosen according to various minimal criteria and international standards. Only sites that met all the criteria were chosen. A study was made to find the most preferred site among the potential sites that met all the criteria. Two mathematical approaches were used: Keeney's multiattribute utility function and Saaty's eigenvalue prioritization technique. Both models ranked the same site as the most desirable; however, the models differed in their ranking of the other sites

  16. Methodology for Selecting Best Management Practices Integrating Multiple Stakeholders and Criteria. Part 1: Methodology

    Directory of Open Access Journals (Sweden)

    Mauricio Carvallo Aceves

    2016-02-01

    Full Text Available The implementation of stormwater Best Management Practices (BMPs could help re-establish the natural hydrological cycle of watersheds after urbanization, with each BMP presenting a different performance across a range of criteria (flood prevention, pollutant removal, etc.. Additionally, conflicting views from the relevant stakeholders may arise, resulting in a complex selection process. This paper proposes a methodology for BMP selection based on the application of multi-criteria decision aid (MCDA methods, integrating multiple stakeholder priorities and BMP combinations. First, in the problem definition, the MCDA methods, relevant criteria and design guidelines are selected. Next, information from the preliminary analysis of the watershed is used to obtain a list of relevant BMPs. The third step comprises the watershed modeling and analysis of the BMP alternatives to obtain performance values across purely objective criteria. Afterwards, a stakeholder analysis based on survey applications is carried out to obtain social performance values and criteria priorities. Then, the MCDA methods are applied to obtain the final BMP rankings. The last step considers the sensitivity analysis and rank comparisons in order to draw the final conclusions and recommendations. Future improvements to the methodology could explore inclusion of multiple objective analysis, and alternative means for obtaining social performance values.

  17. Species-specific spatial characteristics in reserve site selection

    NARCIS (Netherlands)

    Groeneveld, R.A.

    2010-01-01

    This paper addresses the problem of selecting reserve sites cost-effectively, taking into account the mobility and habitat area requirements of each species. Many reserve site selection problems are analyzed in mixed-integer linear programming (MILP) models due to the mathematical solvers available

  18. Search and selection methodology of systematic reviews in orthodontics (2000-2004).

    Science.gov (United States)

    Flores-Mir, Carlos; Major, Michael P; Major, Paul W

    2006-08-01

    More systematic reviews related to orthodontic topics are published each year, although little has been done to evaluate their search and selection methodologies. Systematic reviews related to orthodontics published between January 1, 2000, and December 31, 2004, were searched for their use of multiple electronic databases and secondary searches. The search and selection methods of identified systematic reviews were evaluated against the Cochrane Handbook's guidelines. Sixteen orthodontic systematic reviews were identified in this period. The percentage of reviews documenting and using each criterion of article searching has changed over the last 5 years, with no recognizable directional trend. On average, most systematic reviews documented their electronic search terms (88%) and inclusion-exclusion criteria (100%), and used secondary searching (75%). Many still failed to search more than MEDLINE (56%), failed to document the database names and search dates (37%), failed to document the search strategy (62%), did not use several reviewers for selecting studies (75%), and did not include all languages (81%). The methodology of systematic reviews in orthodontics is still limited, with key methodological components frequently absent or not appropriately described.

  19. Site Selection for Hvdc Ground Electrodes

    Science.gov (United States)

    Freire, P. F.; Pereira, S. Y.

    2014-12-01

    High-Voltage Direct Current (HVDC) transmission systems are composed of a bipole transmission line with a converter substation at each end. Each substation may be equipped with a HVDC ground electrode, which is a wide area (up to 1 km Ø) and deep (from 3 to 100m) electrical grounding. When in normal operation, the ground electrode will dissipate in the soil the unbalance of the bipole (~1.5% of the rated current). When in monopolar operation with ground return, the HVDC electrode will inject in the soil the nominal pole continuous current, of about 2000 to 3000 Amperes, continuously for a period up to a few hours. HVDC ground electrodes site selection is a work based on extensive geophysical and geological surveys, in order to attend the desired design requirements established for the electrodes, considering both its operational conditions (maximum soil temperature, working life, local soil voltage gradients etc.) and the interference effects on the installations located up to 50 km away. This poster presents the geophysical investigations conducted primarily for the electrodes site selection, and subsequently for the development of the crust resistivity model, which will be used for the interference studies. A preliminary site selection is conducted, based on general geographical and geological criteria. Subsequently, the geology of each chosen area is surveyed in detail, by means of electromagnetic/electrical geophysical techniques, such as magnetotelluric (deep), TDEM (near-surface) and electroresistivity (shallow). Other complementary geologic and geotechnical surveys are conducted, such as wells drilling (for geotechnical characterization, measurement of the water table depth and water flow, and electromagnetic profiling), and soil and water sampling (for measurement of thermal parameters and evaluation of electrosmosis risk). The site evaluation is a dynamic process along the surveys, and some sites will be discarded. For the two or three final sites, the

  20. Factors of site selection for nuclear power plants in selected industrial states

    International Nuclear Information System (INIS)

    Hoffmann, L.; Obermair, G.; Ringler, W.; Romahn, B.; Sanders, H.

    1978-01-01

    The range of the tasks within the project consists of working out an optimal catalogue of criteria for the site selection for nuclear power plants; establishing a structured documentation system for the criteria and licensing procedures used by selected industrial countries when selecting sites for nuclear power plants; analyzing and evaluating the documented material with the aim of supplying the basis for decisions concerning land use. The tasks are being realized within a technological ring of data (for the period until 1990, reactor types, cooling, power-heat coupling, special sites, block sizes, local concentration) and a set politico-economical ring of data for the following countries: F.R. Germany, Belgium, Switzerland, Great Britain, Sweden, Denmark, Austria, France, Netherlands, USA, Japan, Yougoslavia. (HP) [de

  1. 32 CFR 644.22 - Site selection.

    Science.gov (United States)

    2010-07-01

    ... and site boards should be informed of any available lands, including marginal lands in civil works... HANDBOOK Project Planning Military (army and Air Force) and Other Federal Agencies § 644.22 Site selection... Engineer to prepare a Real Estate Planning Report or Real Estate Summary, making reference to the prior...

  2. The alternative site selection procedure as covered in the report by the Repository Site Selection Procedures Working Group

    International Nuclear Information System (INIS)

    Brenner, M.

    2005-01-01

    The 2002 Act on the Regulated Termination of the Use of Nuclear Power for Industrial Electricity Generation declared Germany's opting out of the peaceful uses of nuclear power. The problem of the permanent management of radioactive residues is becoming more and more important also in the light of that political decision. At the present time, there are no repositories offering the waste management capacities required. Such facilities need to be created. At the present stage, eligible repository sites are the Konrad mine, a former iron ore mine near Salzgitter, and the Gorleben salt dome. While the fate of the Konrad mine as a repository for waste generating negligible amounts of heat continues to be uncertain, despite a plan approval decision of June 2002, the Gorleben repository is still in the planning phase, at present in a dormant state, so to speak. The federal government expressed doubt about the suitability of the Gorleben site. Against this backdrop, the Federal Ministry for the Environment, Nature Conservation, and Nuclear Safety in February 1999 established AkEnd, the Working Group on Repository Site Selection Procedures. The Group was charged with developing, based on sound scientific criteria, a transparent site selection procedure in order to facilitate the search for repository sites. The Working Group presented its final report in December 2002 after approximately four years of work. The Group's proposals about alternative site selection procedures are explained in detail and, above all, reviewed critically. (orig.)

  3. Savannah River Site Ingestion Pathway Methodology Manual for Airborne Radioactive Releases

    Energy Technology Data Exchange (ETDEWEB)

    Vincent, A.W. III

    2001-01-03

    This manual documents a recommended methodology for determining the ingestion pathway consequences of hypothetical accidental airborne radiological releases from facilities at the Savannah River Site. Both particulate and tritiated radioactive contaminants are addressed. Other approaches should be applied for evaluation of routine releases.

  4. Radioactive waste repository site selection in the Republic of Slovenia

    International Nuclear Information System (INIS)

    Jeran, M.

    1992-01-01

    The report shows the procedure for the low and intermediate level radwaste (LLW and ILW) repository site selection and the work performed up to the present. The procedure for the repository site selection is divided into four steps. In the first step the unsuitable areas are excluded by taking into consideration the rough exclusion criteria. In the second step, the remaining suitable areas are screened to identify the potential sites with respect to preference criteria. In the third step three to five candidate sites will be assessed and selected among the potential sites. In the final, the fourth step, detailed site investigation and confirmation of one or two most suitable sites will follow. In Slovenia the 1st and the 2nd step of site selection have been completed, while step 3 is now in its final stage. (author) [sl

  5. The viking landing sites: selection and certification.

    Science.gov (United States)

    Masursky, H; Crabill, N L

    1976-08-27

    During the past several years the Viking project developed plans to use Viking orbiter instruments and Earth-based radar to certify the suitability of the landing sites selected as the safest and most scientifically rewarding using Mariner 9 data. During June and July 1976, the Earth-based radar and orbital spacecraft observations of some of the prime and backup sites were completed. The results of these combined observations indicated that the Viking 1 prime landing area in the Chryse region of Mars is geologically varied and possibly more hazardous than expected, and was not certifiable as a site for the Viking 1 landing. Consequently, the site certification effort had to be drastically modified and lengthened to search for a site that might be safe enough to attempt to land. The selected site considered at 47.5 degrees W, 22.4 degrees N represented a compromise between desirable characteristics observed with visual images and those inferred from Earth-based radar. It lies in the Chryse region about 900 kilometers northwest of the original site. Viking 1 landed successfully at this site on 20 July 1976.

  6. Standard guide for radioactive pathway methodology for release of sites following decommissioning

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    The purpose of this guide is to provide guidance in determining site-specific conversion factors for translating between dose limits and residual radioactive contamination levels on equipment structures, and land areas. This guide is to serve as a guide to acceptable methodology for translating the yet to be determined dose limits into allowable levels of residual radioactive materials that can be left at a site following decommissioning

  7. Methodology to evaluate the site standard seismic motion for a nuclear facility

    International Nuclear Information System (INIS)

    Soares, W.A.

    1983-03-01

    An overall view of the subjects involved in the determination of the site standard seismic motion to a nuclear facility is presented. The main topics discussed are: basic priciples of seismic instrumentation; dynamic and spectral concepts; design earthquakes definitions; fundamentals of seismology; empirical curves developed from prior seismic data; avalable methodologies and recommended procedures to evaluate the site standard seismic motion. (E.G.) [pt

  8. Selection of the Mars Science Laboratory landing site

    Science.gov (United States)

    Golombek, M.; Grant, J.; Kipp, D.; Vasavada, A.; Kirk, Randolph L.; Fergason, Robin L.; Bellutta, P.; Calef, F.; Larsen, K.; Katayama, Y.; Huertas, A.; Beyer, R.; Chen, A.; Parker, T.; Pollard, B.; Lee, S.; Hoover, R.; Sladek, H.; Grotzinger, J.; Welch, R.; Dobrea, E. Noe; Michalski, J.; Watkins, M.

    2012-01-01

    The selection of Gale crater as the Mars Science Laboratory landing site took over five years, involved broad participation of the science community via five open workshops, and narrowed an initial >50 sites (25 by 20 km) to four finalists (Eberswalde, Gale, Holden and Mawrth) based on science and safety. Engineering constraints important to the selection included: (1) latitude (±30°) for thermal management of the rover and instruments, (2) elevation (surface that is safe for landing and roving and not dominated by fine-grained dust. Science criteria important for the selection include the ability to assess past habitable environments, which include diversity, context, and biosignature (including organics) preservation. Sites were evaluated in detail using targeted data from instruments on all active orbiters, and especially Mars Reconnaissance Orbiter. All of the final four sites have layered sedimentary rocks with spectral evidence for phyllosilicates that clearly address the science objectives of the mission. Sophisticated entry, descent and landing simulations that include detailed information on all of the engineering constraints indicate all of the final four sites are safe for landing. Evaluation of the traversabilty of the landing sites and target “go to” areas outside of the ellipse using slope and material properties information indicates that all are trafficable and “go to” sites can be accessed within the lifetime of the mission. In the final selection, Gale crater was favored over Eberswalde based on its greater diversity and potential habitability.

  9. Turbidity monitoring equipment and methodology evaluation at MDOT construction sites.

    Science.gov (United States)

    2014-12-01

    State Study 261 is a continuation of State study 225, "Turbidity Monitoring at Select : MDOT Construction Sites", which was successful in establishing baseline stream data : at several active construction sites. State Study 261 focused on the equipme...

  10. Turbidity monitoring at select MDOT construction sites.

    Science.gov (United States)

    2012-06-01

    The objective of this project was to establish baseline turbidity conditions at select construction : sites by establishing a water quality monitoring program and documenting MDOT approved : BMPs on site. In 2009 the United States Environmental Prote...

  11. Macro and micro geo-spatial environment consideration for landfill site selection in Sharjah, United Arab Emirates.

    Science.gov (United States)

    Al-Ruzouq, Rami; Shanableh, Abdallah; Omar, Maher; Al-Khayyat, Ghadeer

    2018-02-17

    Waste management involves various procedures and resources for proper handling of waste materials in compliance with health codes and environmental regulations. Landfills are one of the oldest, most convenient, and cheapest methods to deposit waste. However, landfill utilization involves social, environmental, geotechnical, cost, and restrictive regulation considerations. For instance, landfills are considered a source of hazardous air pollutants that can cause health and environmental problems related to landfill gas and non-methanic organic compounds. The increasing number of sensors and availability of remotely sensed images along with rapid development of spatial technology are helping with effective landfill site selection. The present study used fuzzy membership and the analytical hierarchy process (AHP) in a geo-spatial environment for landfill site selection in the city of Sharjah, United Arab Emirates. Macro- and micro-level factors were considered; the macro-level contained social and economic factors, while the micro-level accounted for geo-environmental factors. The weighted spatial layers were combined to generate landfill suitability and overall suitability index maps. Sensitivity analysis was then carried out to rectify initial theoretical weights. The results showed that 30.25% of the study area had a high suitability index for landfill sites in the Sharjah, and the most suitable site was selected based on weighted factors. The developed fuzzy-AHP methodology can be applied in neighboring regions with similar geo-natural conditions.

  12. Site-selective 13C labeling of proteins using erythrose

    International Nuclear Information System (INIS)

    Weininger, Ulrich

    2017-01-01

    NMR-spectroscopy enables unique experimental studies on protein dynamics at atomic resolution. In order to obtain a full atom view on protein dynamics, and to study specific local processes like ring-flips, proton-transfer, or tautomerization, one has to perform studies on amino-acid side chains. A key requirement for these studies is site-selective labeling with 13 C and/or 1 H, which is achieved in the most general way by using site-selectively 13 C-enriched glucose (1- and 2- 13 C) as the carbon source in bacterial expression systems. Using this strategy, multiple sites in side chains, including aromatics, become site-selectively labeled and suitable for relaxation studies. Here we systematically investigate the use of site-selectively 13 C-enriched erythrose (1-, 2-, 3- and 4- 13 C) as a suitable precursor for 13 C labeled aromatic side chains. We quantify 13 C incorporation in nearly all sites in all 20 amino acids and compare the results to glucose based labeling. In general the erythrose approach results in more selective labeling. While there is only a minor gain for phenylalanine and tyrosine side-chains, the 13 C incorporation level for tryptophan is at least doubled. Additionally, the Phe ζ and Trp η2 positions become labeled. In the aliphatic side chains, labeling using erythrose yields isolated 13 C labels for certain positions, like Ile β and His β, making these sites suitable for dynamics studies. Using erythrose instead of glucose as a source for site-selective 13 C labeling enables unique or superior labeling for certain positions and is thereby expanding the toolbox for customized isotope labeling of amino-acid side-chains.

  13. Site selection report basalt waste isolation program near-surface test facility

    International Nuclear Information System (INIS)

    Sharpe, S.D.

    1978-01-01

    A site selection committee was established to review the information gathered on potential sites and to select a site for the Near-Surface Test Facility Phase I. A decision was made to use a site on the north face of Gable Mountain located on the Hanford Site. This site provided convenient access to the Pomona Basalt Flow. This flow was selected for use at this site because it exhibited the characteristics established in the primary criteria. These criteria were: the flows thickness; its dryness; its nearness to the surface; and, its similarities to basalt units which are candidates for the repository. After the selection of the Near-Surface Test Facility Phase I Site, the need arose for an additional facility to demonstrate safe handling, storage techniques, and the physical effects of radioactive materials on an in situ basalt formation. The committee reviewed the sites selected for Phase I and chose the same site for locating Phase II of the Near-Surface Test Facility

  14. Quality of data used in site selection

    International Nuclear Information System (INIS)

    Delvin, W.L.

    1986-01-01

    The selection of sites for nuclear waste repositories requires an investigative effort to characterize potential sites with regard to geologic properties and environmental considerations. Such investigations generate scientific and engineering data through the experimental testing and evaluation of geologic and environmental materials and through sampling and analysis of those materials. Data generated for site selection must be correct, defendable, and suitable for their intended use; they must have quality. Five quality characteristics are defined and practices followed by scientists and engineers producing data have been grouped into seven categories called quality guides. These are presented in the paper and the relationship between the guides (practices) and the five quality characteristics is shown

  15. Methodological development for selection of significant predictors explaining fatal road accidents.

    Science.gov (United States)

    Dadashova, Bahar; Arenas-Ramírez, Blanca; Mira-McWilliams, José; Aparicio-Izquierdo, Francisco

    2016-05-01

    Identification of the most relevant factors for explaining road accident occurrence is an important issue in road safety research, particularly for future decision-making processes in transport policy. However model selection for this particular purpose is still an ongoing research. In this paper we propose a methodological development for model selection which addresses both explanatory variable and adequate model selection issues. A variable selection procedure, TIM (two-input model) method is carried out by combining neural network design and statistical approaches. The error structure of the fitted model is assumed to follow an autoregressive process. All models are estimated using Markov Chain Monte Carlo method where the model parameters are assigned non-informative prior distributions. The final model is built using the results of the variable selection. For the application of the proposed methodology the number of fatal accidents in Spain during 2000-2011 was used. This indicator has experienced the maximum reduction internationally during the indicated years thus making it an interesting time series from a road safety policy perspective. Hence the identification of the variables that have affected this reduction is of particular interest for future decision making. The results of the variable selection process show that the selected variables are main subjects of road safety policy measures. Published by Elsevier Ltd.

  16. Site-Selection in Single-Molecule Junction for Highly Reproducible Molecular Electronics.

    Science.gov (United States)

    Kaneko, Satoshi; Murai, Daigo; Marqués-González, Santiago; Nakamura, Hisao; Komoto, Yuki; Fujii, Shintaro; Nishino, Tomoaki; Ikeda, Katsuyoshi; Tsukagoshi, Kazuhito; Kiguchi, Manabu

    2016-02-03

    Adsorption sites of molecules critically determine the electric/photonic properties and the stability of heterogeneous molecule-metal interfaces. Then, selectivity of adsorption site is essential for development of the fields including organic electronics, catalysis, and biology. However, due to current technical limitations, site-selectivity, i.e., precise determination of the molecular adsorption site, remains a major challenge because of difficulty in precise selection of meaningful one among the sites. We have succeeded the single site-selection at a single-molecule junction by performing newly developed hybrid technique: simultaneous characterization of surface enhanced Raman scattering (SERS) and current-voltage (I-V) measurements. The I-V response of 1,4-benzenedithiol junctions reveals the existence of three metastable states arising from different adsorption sites. Notably, correlated SERS measurements show selectivity toward one of the adsorption sites: "bridge sites". This site-selectivity represents an essential step toward the reliable integration of individual molecules on metallic surfaces. Furthermore, the hybrid spectro-electric technique reveals the dependence of the SERS intensity on the strength of the molecule-metal interaction, showing the interdependence between the optical and electronic properties in single-molecule junctions.

  17. Low-level waste disposal site performance assessment with the RQ/PQ methodology. Final report

    International Nuclear Information System (INIS)

    Rogers, V.C.; Grant, M.W.; Sutherland, A.A.

    1982-12-01

    A methodology called RQ/PQ (retention quotient/performance quotient) has been developed for relating the potential hazard of radioactive waste to the natural and man-made barriers provided by a disposal facility. The methodology utilizes a systems approach to quantify the safety of low-level waste disposed in a near-surface facility. The main advantages of the RQ/PQ methodology are its simplicity of analysis and clarity of presentation while still allowing a comprehensive set of nuclides and pathways to be treated. Site performance and facility designs for low-level waste disposal can be easily investigated with relatively few parameters needed to define the problem. Application of the methodology has revealed that the key factor affecting the safety of low-level waste disposal in near surface facilities is the potential for intrusion events. Food, inhalation and well water pathways dominate in the analysis of such events. While the food and inhalation pathways are not strongly site-dependent, the well water pathway is. Finally, burial at depths of 5 m or more was shown to reduce the impacts from intrusion events

  18. Wetland survey of selected areas in the K-24 Site Area of responsibility

    Energy Technology Data Exchange (ETDEWEB)

    Rosensteel, B.A.; Awl, D.J. [JAYCOR, Environmental Division, Oak Ridge, TN (United States)

    1995-07-01

    In accordance with DOE Regulations for Compliance with Floodplain/Wetlands Environmental Review Requirements, wetland surveys were conducted in selected areas within the K-25 Area of Responsibility during the summer of 1994. These areas are Mitchell Branch, Poplar Creek, the K-770 OU, Duct Island Peninsula, the Powerhouse area, and the K-25 South Corner. Previously surveyed areas included in this report are the main plant area of the K-25 Site, the K-901 OU, the AVLIS site, and the K-25 South Site. Wetland determinations were based on the USACE methodology. Forty-four separate wetland areas, ranging in size from 0.13 to 4.23 ha, were identified. Wetlands were identified in all of the areas surveyed with the exception of the interior of the Duct Island Peninsula and the main plant area of the K-25 Site. Wetlands perform functions such as floodflow alteration, sediment stabilization, sediment and toxicant retention, nutrient transformation, production export, and support of aquatic species and wildlife diversity and abundance. The forested, scrub-shrub, and emergent wetlands identified in the K-25 area perform some or all of these functions to varying degrees.

  19. Wetland survey of selected areas in the K-24 Site Area of responsibility

    International Nuclear Information System (INIS)

    Rosensteel, B.A.; Awl, D.J.

    1995-07-01

    In accordance with DOE Regulations for Compliance with Floodplain/Wetlands Environmental Review Requirements, wetland surveys were conducted in selected areas within the K-25 Area of Responsibility during the summer of 1994. These areas are Mitchell Branch, Poplar Creek, the K-770 OU, Duct Island Peninsula, the Powerhouse area, and the K-25 South Corner. Previously surveyed areas included in this report are the main plant area of the K-25 Site, the K-901 OU, the AVLIS site, and the K-25 South Site. Wetland determinations were based on the USACE methodology. Forty-four separate wetland areas, ranging in size from 0.13 to 4.23 ha, were identified. Wetlands were identified in all of the areas surveyed with the exception of the interior of the Duct Island Peninsula and the main plant area of the K-25 Site. Wetlands perform functions such as floodflow alteration, sediment stabilization, sediment and toxicant retention, nutrient transformation, production export, and support of aquatic species and wildlife diversity and abundance. The forested, scrub-shrub, and emergent wetlands identified in the K-25 area perform some or all of these functions to varying degrees

  20. URBAN RAIN GAUGE SITING SELECTION BASED ON GIS-MULTICRITERIA ANALYSIS

    Directory of Open Access Journals (Sweden)

    Y. Fu

    2016-06-01

    Full Text Available With the increasingly rapid growth of urbanization and climate change, urban rainfall monitoring as well as urban waterlogging has widely been paid attention. In the light of conventional siting selection methods do not take into consideration of geographic surroundings and spatial-temporal scale for the urban rain gauge site selection, this paper primarily aims at finding the appropriate siting selection rules and methods for rain gauge in urban area. Additionally, for optimization gauge location, a spatial decision support system (DSS aided by geographical information system (GIS has been developed. In terms of a series of criteria, the rain gauge optimal site-search problem can be addressed by a multicriteria decision analysis (MCDA. A series of spatial analytical techniques are required for MCDA to identify the prospective sites. With the platform of GIS, using spatial kernel density analysis can reflect the population density; GIS buffer analysis is used to optimize the location with the rain gauge signal transmission character. Experiment results show that the rules and the proposed method are proper for the rain gauge site selection in urban areas, which is significant for the siting selection of urban hydrological facilities and infrastructure, such as water gauge.

  1. Can multi-criteria analysis models support the site selection for a repository for heat-generating waste?

    International Nuclear Information System (INIS)

    Gutberlet, Daniela

    2015-01-01

    The decision for or against a potential site for a nuclear waste repository is highly complex and requires decision-makers to consider multiple assessment criteria. The complexity of each site and its characteristics, and the differing opinions among members of the public and advocacy groups mean t hat conflicts of interest are likely to arise. In this paper, the author suggests that multi-criteria analysis models could be used to provide methodological support during the selection process. The models can map these types of decision situations and suggest coherent solutions with relatively little formal effort. They allow users to compare different opt ions simultaneously and ensure that t heir decision-making Is conscious rather than arbitrary.

  2. The role of safety analyses in site selection. Some personal observations based on the experience from the Swiss site selection process

    Energy Technology Data Exchange (ETDEWEB)

    Zuidema, Piet [Nagra, Wettingen (Switzerland)

    2015-07-01

    In Switzerland, the site selection process according to the ''Sectoral Plan for Deep Geological Repositories'' (BFE 2008) is underway since 2008. This process takes place in three stages. In stage 1 geological siting regions (six for the L/ILW repository and three for the HLW repository) have been identified, in stage 2 sites for the surface facilities have been identified for all siting regions in close co-operation with the sting regions and a narrowing down of the number of siting regions based on geological criteria will take place. In stage 3 the sites for a general license application are selected and the general license applications will be submitted which eventually will lead to the siting decision for both repository types. In the Swiss site selection process, safety has the highest priority. Many factors affect safety and thus a whole range of safety-related issues are considered in the identification and screening of siting possibilities. Besides dose calculations a range of quantitative and qualitative issues are considered. Dose calculations are performed in all three stages of the site selection process. In stage 1 generic safety calculations were made to develop criteria to be used for the identification of potential siting regions. In stage 2, dose calculations are made for comparing the different siting regions according to a procedure prescribed in detail by the regulator. Combined with qualitative evaluations this will lead to a narrowing down of the number of siting regions to at least two siting regions for each repository type. In stage 3 full safety cases will be prepared as part of the documentation for the general license applications. Besides the dose calculations, many other issues related to safety are analyzed in a quantitative and qualitative manner. These consider the 13 criteria defined in the Sectoral Plan and the corresponding indicators. The features analyzed cover the following broad themes: efficiency of

  3. The role of safety analyses in site selection. Some personal observations based on the experience from the Swiss site selection process

    International Nuclear Information System (INIS)

    Zuidema, Piet

    2015-01-01

    In Switzerland, the site selection process according to the ''Sectoral Plan for Deep Geological Repositories'' (BFE 2008) is underway since 2008. This process takes place in three stages. In stage 1 geological siting regions (six for the L/ILW repository and three for the HLW repository) have been identified, in stage 2 sites for the surface facilities have been identified for all siting regions in close co-operation with the sting regions and a narrowing down of the number of siting regions based on geological criteria will take place. In stage 3 the sites for a general license application are selected and the general license applications will be submitted which eventually will lead to the siting decision for both repository types. In the Swiss site selection process, safety has the highest priority. Many factors affect safety and thus a whole range of safety-related issues are considered in the identification and screening of siting possibilities. Besides dose calculations a range of quantitative and qualitative issues are considered. Dose calculations are performed in all three stages of the site selection process. In stage 1 generic safety calculations were made to develop criteria to be used for the identification of potential siting regions. In stage 2, dose calculations are made for comparing the different siting regions according to a procedure prescribed in detail by the regulator. Combined with qualitative evaluations this will lead to a narrowing down of the number of siting regions to at least two siting regions for each repository type. In stage 3 full safety cases will be prepared as part of the documentation for the general license applications. Besides the dose calculations, many other issues related to safety are analyzed in a quantitative and qualitative manner. These consider the 13 criteria defined in the Sectoral Plan and the corresponding indicators. The features analyzed cover the following broad themes: efficiency of

  4. Site selection for controversial projects: reflections on the MRS experience

    International Nuclear Information System (INIS)

    Sigmon, E.B.; Marland, G.

    1987-01-01

    Projects for waste management, power production, and a host of other socially useful functions frequently falter because of local opposition. Students of the siting dilemma have prescribed accommodation of local interests through negotiation and compensation, but they offer little advice on the site selection itself. The negotiated compensation approach to siting frequently fails because localities refuse to negotiate. The authors argue that methods of site selection and developers' initial stance toward local communities affect communities' propensity to negotiate. Site selection strategies and their influence on project acceptability are examined, using the Department of Energy's Monitored Retrievable Storage proposal as a point of departure. 14 refs

  5. Sustainable Site Selection for Offshore Wind Farms in the South Aegean—Greece

    Directory of Open Access Journals (Sweden)

    Dimitra G. Vagiona

    2018-03-01

    Full Text Available The present research study develops and implements an integrated methodology for the evaluation and prioritization of appropriate sites for sustainable offshore wind-farm development at a regional level. The methodological framework includes the application of several siting criteria (technical, spatial, economic, social and environmental proposed either by the national legislative framework (Specific Plan for Spatial Planning and Sustainable Development for Renewable Energy or the international literature with the combined use of geographic information systems (GIS and multi-criteria decision methods, namely the analytical hierarchy process (AHP and technique for order preference by similarity to ideal solution (TOPSIS. The whole methodology provides a decision-making process for offshore wind-farm planning at regional level. The proposed methodology and the outputs of this work can be used to ensure the sustainable spatial development and policy of renewable energy resources.

  6. Airfoil selection methodology for Small Wind Turbines

    DEFF Research Database (Denmark)

    Salgado Fuentes, Valentin; Troya, Cesar; Moreno, Gustavo

    2016-01-01

    On wind turbine technology, the aerodynamic performance is fundamental to increase efficiency. Nowadays there are several databases with airfoils designed and simulated for different applications; that is why it is necessary to select those suitable for a specific application. This work presents...... a new methodology for airfoil selection used in feasibility and optimization of small wind turbines with low cut-in speed. On the first stage, airfoils data is tested on XFOIL software to check its compatibility with the simulator; then, arithmetic mean criteria is recursively used to discard...... underperformed airfoils; the best airfoil data was exported to Matlab for a deeper analysis. In the second part, data points were interpolated using "splines" to calculate glide ratio and stability across multiple angles of attack, those who present a bigger steadiness were conserved. As a result, 3 airfoils...

  7. Selection of suitable sites for NPP in Slovenia (stage 3)

    International Nuclear Information System (INIS)

    Grgic, M.; Fabjan, L.; Premru, U.

    1977-01-01

    Selection of suitable sites for nuclear power plants in Slovenia is considered. This includes the studies of available data on regional and local characteristics specified in general site suitability criteria for NPP. The most suitable selected sites will be included into land use urbanistic planning of Slovenia

  8. Replacement Power Facility site selection report

    Energy Technology Data Exchange (ETDEWEB)

    Wike, L.D.; Toole, G.L.; Specht, W.L.

    1992-06-01

    The Department of Energy (DOE) has proposed the construction and operation of a Replacement Power Facility (RPF) for supplementing and replacing existing sources of steam and possibly electricity at the Savannah River Site (SRS). DOE is preparing an Environmental Impact Statement (EIS) for this project As part of the impact analysis of the proposed action, the EIS will include a detailed description of the environment where the RPF will be constructed. This description must be specific to the recommended site at SRS, which contains more than 300 square miles of land including streams, lakes, impoundments, wetlands, and upland areas. A formal site-selection process was designed and implemented to identify the preferred RPF site.

  9. URBAN RAIN GAUGE SITING SELECTION BASED ON GIS-MULTICRITERIA ANALYSIS

    OpenAIRE

    Y. Fu; C. Jing; M. Du

    2016-01-01

    With the increasingly rapid growth of urbanization and climate change, urban rainfall monitoring as well as urban waterlogging has widely been paid attention. In the light of conventional siting selection methods do not take into consideration of geographic surroundings and spatial-temporal scale for the urban rain gauge site selection, this paper primarily aims at finding the appropriate siting selection rules and methods for rain gauge in urban area. Additionally, for optimization gauge loc...

  10. SR-Site groundwater flow modelling methodology, setup and results

    International Nuclear Information System (INIS)

    Selroos, Jan-Olof; Follin, Sven

    2010-12-01

    As a part of the license application for a final repository for spent nuclear fuel at Forsmark, the Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken three groundwater flow modelling studies. These are performed within the SR-Site project and represent time periods with different climate conditions. The simulations carried out contribute to the overall evaluation of the repository design and long-term radiological safety. Three time periods are addressed; the Excavation and operational phases, the Initial period of temperate climate after closure, and the Remaining part of the reference glacial cycle. The present report is a synthesis of the background reports describing the modelling methodology, setup, and results. It is the primary reference for the conclusions drawn in a SR-Site specific context concerning groundwater flow during the three climate periods. These conclusions are not necessarily provided explicitly in the background reports, but are based on the results provided in these reports. The main results and comparisons presented in the present report are summarised in the SR-Site Main report

  11. SR-Site groundwater flow modelling methodology, setup and results

    Energy Technology Data Exchange (ETDEWEB)

    Selroos, Jan-Olof (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Follin, Sven (SF GeoLogic AB, Taeby (Sweden))

    2010-12-15

    As a part of the license application for a final repository for spent nuclear fuel at Forsmark, the Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken three groundwater flow modelling studies. These are performed within the SR-Site project and represent time periods with different climate conditions. The simulations carried out contribute to the overall evaluation of the repository design and long-term radiological safety. Three time periods are addressed; the Excavation and operational phases, the Initial period of temperate climate after closure, and the Remaining part of the reference glacial cycle. The present report is a synthesis of the background reports describing the modelling methodology, setup, and results. It is the primary reference for the conclusions drawn in a SR-Site specific context concerning groundwater flow during the three climate periods. These conclusions are not necessarily provided explicitly in the background reports, but are based on the results provided in these reports. The main results and comparisons presented in the present report are summarised in the SR-Site Main report.

  12. Selection of candidate sites for a LLRW disposal facility in Connecticut

    International Nuclear Information System (INIS)

    Gingerich, Ronald E.; Holeman, George R.; Hileman, James A.

    1992-01-01

    Connecticut, one of the two members of the Northeast Interstate Low-Level Radioactive Waste Management Compact, has been directed by the Compact Commission to site a facility to manage the low-level radioactive waste (LLRW) generated in Connecticut. The Connecticut Hazardous Waste Management Service (CHWMS) has been given the responsibility to identify a site in the state for a LLRW disposal facility. The CHWMS has decided to plan for a site with an operating life of 50 years. A site of at least 160 acres will be needed to accommodate (he expected volume of LLRW and meet state and federal site requirements. A Site Selection Plan establishing the process and criteria to be used in siting a facility was adopted by the CHWMS in November 1990. The Plan calls for a stepwise screening of the state using published data to identify three candidate sites. A preferred site will be selected from among the candidate sites using onsite testing. The site selection criteria, which closely follow state and federal statutory and regulatory requirements, are divided into three types: exclusionary, avoidance and preference. Battelle Memorial Institute was selected as the contractor to assist the CHWMS in site screening. With guidance from the CHWMS, Battelle undertook screening of the state by applying the exclusionary, avoidance and preference criteria in three steps to identify from eight to twelve potential sites. The CHWMS Board of Directors bad decided that it wanted to be closely involved in the selection of the three candidate sites and to do so in a way that precluded the political and parochial pressures that are inevitably associated with a siting process. To meet these two goals a geographically neutral approach was devised for candidate site selection. In June, 1991 the CHWMS, with assistance from Battelle, conducted a three day workshop, open to the public, in which eight sites were presented to the Board. Data on the sites were presented in a way that did not disclose

  13. 20 CFR 638.303 - Site selection and facilities management.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Site selection and facilities management. 638... Facilities Management § 638.303 Site selection and facilities management. (a) The Job Corps Director shall... center, facilities engineering and real estate management will be conducted by the Job Corps Director or...

  14. Overview of the site selection, geological and engineering problems facing radioactive waste disposal at Sellafield, UK

    International Nuclear Information System (INIS)

    Haszeldine, R.S.; Smythe, D.K.

    1996-01-01

    UK Nirex Ltd is the company charged with finding a suitable site for the disposal of radioactive waste in the United Kingdom. Since 1991, Nirex has concentrated its site investigation work at Longlands Farm which is owned by British Nuclear Fuels Ltd and is near their Sellafield site. Planning permission was sought for the development of an underground Rock Characterisation Facility (RCF) at the site in 1994. A public Planning Inquiry began in September 1995. A wide range of scientific and technical objections were put by expert witnesses against the Nirex Proposal. These witnesses were co-ordinated by three Objecting Organisations - Cumbria County Council, Friends of the Earth and Greenpeace. Their written evidence is presented in this book. The grounds of the objections include: the inadequacy of the methodology adopted by Nirex for site selection and investigation; The unsuitability of the site geology, hydrology and geochemistry; that construction of the RCF would destroy the data essential to deciding site suitability; that the RCF would provide a conduit for the release of radioactivity; a number of features in the Nirex risk assessment that would lead to an underestimation of the potential risks of a repository at this site. (UK)

  15. Site-directed alkylation of multiple opioid receptors. I. Binding selectivity

    International Nuclear Information System (INIS)

    James, I.F.; Goldstein, A.

    1984-01-01

    A method for measuring and expressing the binding selectivity of ligands for mu, delta, and kappa opioid binding sites is reported. Radioligands are used that are partially selective for these sites in combination with membrane preparations enriched in each site. Enrichment was obtained by treatment of membranes with the alkylating agent beta-chlornaltrexamine in the presence of appropriate protecting ligands. After enrichment for mu receptors, [ 3 H] dihydromorphine bound to a single type of site as judged by the slope of competition binding curves. After enrichment for delta or kappa receptors, binding sites for [ 3 H] [D-Ala2, D-Leu5]enkephalin and [3H]ethylketocyclazocine, respectively, were still not homogeneous. There were residual mu sites in delta-enriched membranes but no evidence for residual mu or delta sites in kappa-enriched membranes were found. This method was used to identify ligands that are highly selective for each of the three types of sites

  16. On-site investigations of hydrocarbon contaminated soil by the Pollut-Eval methodology

    International Nuclear Information System (INIS)

    Benoit, Y.; Prigent, S.; Haeseler, F.

    2005-01-01

    The Pollut-Eval method is based on the Rock-Eval pyrolysis method, founded on an IFP patent that has been used for decades for oil prospecting in sedimentary basins all over the world. This equipment provides data on the quantity and the quality of organic matter in sedimentary rocks. With the increasing demand for cost effective and rapid contaminated site diagnosis, it became obvious that the field of application of the Rock-Eval technology should be enlarged to environmental problematic. The Pollut-Eval methodology was developed since 1996 and firstly qualified through the design of a laboratory version. Compared to the previous apparatus dedicated to the geochemistry, innovations allow acquisition of data for accurate quantification of complex organic pollutants and mineral carbon distribution. New methods were developed especially for the characterisation of hydrocarbon pollutants in soil. Compared to kerogen analysis, the characterisation of light petroleum cuts entrapped in soil as pollutants was available by the design of an adapted refrigerated auto-sampler. The prevention of the loss of the high vapour tension pollutants couldn't be avoided for the new environmental field of applications. Site after site, the various experiments involving the 'laboratory' version of the Pollut-Eval analyser extended the application field of the methodology. The efficiency of the thermal extraction applied directly on the soil showed useful advantages compared to conventional solvent extraction techniques, especially for pollutants originating from former gas plants. The method was especially suitable for the determination of the complete carbon mass balance in the case of non-extractable organic pollutant such as coal tar or for heavy petroleum cut such as heavy fuel, vacuum distillation residue and bitumen. By the way, the Pollut-Eval method became rapidly complementary to more conventional GC quantification dedicated to complex organic pollution characterisation. By the

  17. SELECTING WORKING TEAMS FOR INFORMATION TECHNOLOGY OUTSOURCING PROJECTS THROUGH A COMBINATION OF METHODOLOGIES

    Directory of Open Access Journals (Sweden)

    María Alejandra Castellini

    Full Text Available ABSTRACT This paper deals with a problem that Information Technology outsourcing suppliers generally face when selecting a working team technically capable for specific roles in software development projects. A combination of methodologies, interactively integrated, is proposed. They are Soft System Methodology to structure the problem, Repertory Grid for individual interviews and elicitation of the selection criteria, DRV Processes to assess the candidates and to generate knowledge and consensus on the selection process and Linear Programming to assign people to each position. This multimethodology allowed finding a more comprehensive solution than that initially requested by the company, since it helped to establish the necessary transformations for the selection model to operate in the right way, set the competencies to be considered as selection criteria, develop a consensus estimate of the weighted criteria, and award global values to candidates, optimizing the assignment of roles in the group for the project.

  18. Final disposal of spent nuclear fuel - basis for site selection

    International Nuclear Information System (INIS)

    Anttila, P.

    1995-05-01

    International organizations, e.g. IAEA, have published several recommendations and guides for the safe disposal of radioactive waste. There are three major groups of issues affecting the site selection process, i.e. geological, environmental and socioeconomic. The first step of the site selection process is an inventory of potential host rock formations. After that, potential study areas are screened to identify sites for detailed investigations, prior to geological conditions and overall suitability for the safe disposal. This kind of stepwise site selection procedure has been used in Finland and in Sweden. A similar approach has been proposed in Canada, too. In accordance with the amendment to the Nuclear Energy Act, that entered into force in the beginning of 1995, Imatran Voima Oy has to make preparations for the final disposal of spent fuel in the Finnish bedrock. Relating to the possible site selection, the following geological factors, as internationally recommended and used in the Nordic countries, should be taken into account: topography, stability of bedrock, brokenness and fracturing of bedrock, size of bedrock block, rock type, predictability and natural resources. The bedrock of the Loviisa NPP site is a part of the Vyborg rapakivi massif. As a whole the rapakivi granite area forms a potential target area, although other rock types or areas cannot be excluded from possible site selection studies. (25 refs., 7 figs.)

  19. The extent of on-site leakage in selected suburbs of Johannesburg ...

    African Journals Online (AJOL)

    This study investigated on-site leakage on 182 properties with relatively new municipal water meters in well-established suburbs of Johannesburg. A methodology was developed to estimate the on-site leakage rate from readings taken from these municipal water meters, which was then adjusted to account for metering ...

  20. Communication activities for NUMO's site selection process

    International Nuclear Information System (INIS)

    Takeuchi, Mitsuo; Okuyama, Shigeru; Kitayama, Kazumi; Kuba, Michiyoshi

    2004-01-01

    A siting program for geological disposal of high-level radioactive waste (HLW) in Japan has just started and is moving into a new stage of communication with the public. A final repository site will be selected via a stepwise process, as stipulated in the Specified Radioactive Waste Final Disposal Act promulgated in June 2000. Based on the Act, the site selection process of the Nuclear Waste Management Organization of Japan (NUMO, established in October 2000) will be carried out in the three steps: selection of Preliminary Investigation Areas (PIAs), selection of Detailed Investigation Areas (DIAs) and selection of the Repository Site. The Act also defines NUMO's responsibilities in terms of implementing the HLW disposal program in an open and transparent manner. NUMO fully understands the importance of public participation in its activities and is aiming to promote public involvement in the process of site selection based on a fundamental policy, which consists of 'adopting a stepwise approach', 'respecting the initiative of municipalities' and 'ensuring transparency in information disclosure'. This policy is clearly reflected in the adoption of an open solicitation approach for volunteer municipalities for Preliminary Investigation Areas (PIAs). NUMO made the official announcement of the start of its open solicitation program on 19 December 2002. This paper outlines how NUMO's activities are currently carried out with a view to encouraging municipalities to volunteer as PIAs and how public awareness of the safety of the HLW disposal is evaluated at this stage

  1. Contracting Selection for the Development of the Range Rule Risk Methodology

    National Research Council Canada - National Science Library

    1997-01-01

    ...-Effectiveness Risk Tool and contractor selection for the development of the Range Rule Risk Methodology. The audit objective was to determine whether the Government appropriately used the Ordnance and Explosives Cost-Effectiveness Risk Tool...

  2. A GIS-assisted approach to wide-area wind resource assessment and site selection for the state of Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Brower, M.C. [Brower & Company, Andover, MA (United States); Hurley, P. [RLA Consulting, Bothell, WA (United States); Simon, R. [Consulting Meteorologist, Mill Valley, CA (United States)

    1996-12-31

    This paper describes the methodology and results of a wide-area wind resource assessment and site selection in Colorado. This was the first phase in a three-part assessment and monitoring program conducted for the State of Colorado Office of Energy Conservation and several collaborating utilities. The objective of this phase was to identify up to 20 candidate sites for evaluation and possible long-term monitoring. This was accomplished using a geographic information system (GIS), which takes into account such factors as topography, existing wind resource data, locations of transmission lines, land cover, and land use. The resulting list of sites recommended for evaluation in Phase 2 of the study includes locations throughout Colorado, but most are in the eastern plains. The GIS wind siting model may be modified and updated in the future as additional information becomes available. 3 figs., 1 tab.

  3. Regulatory requirements for nuclear power plant site selection in Malaysia-a review.

    Science.gov (United States)

    Basri, N A; Hashim, S; Ramli, A T; Bradley, D A; Hamzah, K

    2016-12-01

    Malaysia has initiated a range of pre-project activities in preparation for its planned nuclear power programme. Clearly one of the first steps is the selection of sites that are deemed suitable for the construction and operation of a nuclear power plant. Here we outline the Malaysian regulatory requirements for nuclear power plant site selection, emphasizing details of the selection procedures and site characteristics needed, with a clear focus on radiation safety and radiation protection in respect of the site surroundings. The Malaysia Atomic Energy Licensing Board (AELB) site selection guidelines are in accord with those provided in International Atomic Energy Agency (IAEA) and United Stated Nuclear Regulatory Commission (USNRC) documents. To enhance the suitability criteria during selection, as well as to assist in the final decision making process, possible assessments using the site selection characteristics and information are proposed.

  4. Automated training site selection for large-area remote-sensing image analysis

    Science.gov (United States)

    McCaffrey, Thomas M.; Franklin, Steven E.

    1993-11-01

    A computer program is presented to select training sites automatically from remotely sensed digital imagery. The basic ideas are to guide the image analyst through the process of selecting typical and representative areas for large-area image classifications by minimizing bias, and to provide an initial list of potential classes for which training sites are required to develop a classification scheme or to verify classification accuracy. Reducing subjectivity in training site selection is achieved by using a purely statistical selection of homogeneous sites which then can be compared to field knowledge, aerial photography, or other remote-sensing imagery and ancillary data to arrive at a final selection of sites to be used to train the classification decision rules. The selection of the homogeneous sites uses simple tests based on the coefficient of variance, the F-statistic, and the Student's i-statistic. Comparisons of site means are conducted with a linear growing list of previously located homogeneous pixels. The program supports a common pixel-interleaved digital image format and has been tested on aerial and satellite optical imagery. The program is coded efficiently in the C programming language and was developed under AIX-Unix on an IBM RISC 6000 24-bit color workstation.

  5. Selection of sites for nuclear power plants in The Netherlands. Pt. A

    International Nuclear Information System (INIS)

    1985-01-01

    In this report a policy proposal is presented concerning the selection of location sites for new nuclear power plants in the Netherlands. Firstly it is investigated which of the 29 already selected location sites are not to be taken into further account because of obvious obstructions (close vicinity of a big city etc.). The remaining sites are judged on the base of local population magnitude. The sites that pass the last criteria are relatively compared from a large number of viewpoints. To round off the selection procedure the government will explain why they consider the finally selected sites to be suitable for location of new nuclear power plants. Steps are indicated to prevent the decrease of planologic suitability of the selected location sites. (Auth.)

  6. Statewide screening for low-level radioactive waste shallow land burial sites

    International Nuclear Information System (INIS)

    Staub, W.P.; Cannon, J.B.; Stratton, L.E.

    1984-01-01

    A methodology was developed for statewide low-level waste site screening based on NRC site selection criteria. The methodology and criteria were tested in Tennessee to determine their effectiveness in narrowing the choice of sites for more intensive localized site screening. The statewide screening methodology entailed two steps. The first step was to select one or more physiographic provinces wherein sites meeting the criteria were most likely to be found. The second step was to select one or more suitable outcrop bands from within the most favorable physiographic provinces. These selections were based entirely on examination of existing literature and maps at scales no larger than 1:250,000. The statewide screening project identified only one suitable physiographic province (the Mississippi Embayment region) and one favorable outcrop band (the Coon Creek Formation) within a three county area of western Tennessee. Ground water monitoring and predictability proved to be the most difficult criterion to meet. This criterion alone eliminated other outcrop bands in the Mississippi Embayment as well as the Eastern Highland Rim and Western Highland Rim physiographic provinces. Other provinces failed to meet several screening criteria. 3 references, 3 figures, 1 table

  7. Site selection criteria for shallow land burial of low-level radioactive waste

    International Nuclear Information System (INIS)

    Falconer, K.L.; Hull, L.C.; Mizell, S.A.

    1982-01-01

    Twelve site selection criteria are presented. These are: (1) site shall be of sufficient area and depth to accommodate the projected volume of waste and a three dimensional buffer zone; (2) site should allow waste to be buried either completely above or below the transition zone between the unsaturated and saturated zones; (3) site should be located where flooding will not jeopardize performance; (4) site should be located where erosion will not jeopardize performance; (5) site should be located in areas where hydrogeologic conditions allow reliable performance prediction; (6) site should be located where geologic hazards will not jeopardize performance; (7) site should be selected with considerations given to those characteristics of earth materials and water chemistry that favor increased residence times and/or attenuation of radionuclide concentrations within site boundaries; (8) site should be selected with consideration given to current and projected population distributions; (9) site should be selected with consideration given to current and projected land use and resource development; (10) site should be selected with consideration given to location of waste generation, access to all-weather highway and rail routes, and access utilities; (11) site should be selected consistent with federal laws and regulations; (12) site should not be located within areas that are protected from such use by federal laws and regulations. These criteria are considered preliminary and do not necessarily represent the position of the Department of Energy's Low-Level Waste Management Program

  8. Site-selective {sup 13}C labeling of proteins using erythrose

    Energy Technology Data Exchange (ETDEWEB)

    Weininger, Ulrich, E-mail: ulrich.weininger@physik.uni-halle.de [Lund University, Department of Biophysical Chemistry, Center for Molecular Protein Science (Sweden)

    2017-03-15

    NMR-spectroscopy enables unique experimental studies on protein dynamics at atomic resolution. In order to obtain a full atom view on protein dynamics, and to study specific local processes like ring-flips, proton-transfer, or tautomerization, one has to perform studies on amino-acid side chains. A key requirement for these studies is site-selective labeling with {sup 13}C and/or {sup 1}H, which is achieved in the most general way by using site-selectively {sup 13}C-enriched glucose (1- and 2-{sup 13}C) as the carbon source in bacterial expression systems. Using this strategy, multiple sites in side chains, including aromatics, become site-selectively labeled and suitable for relaxation studies. Here we systematically investigate the use of site-selectively {sup 13}C-enriched erythrose (1-, 2-, 3- and 4-{sup 13}C) as a suitable precursor for {sup 13}C labeled aromatic side chains. We quantify {sup 13}C incorporation in nearly all sites in all 20 amino acids and compare the results to glucose based labeling. In general the erythrose approach results in more selective labeling. While there is only a minor gain for phenylalanine and tyrosine side-chains, the {sup 13}C incorporation level for tryptophan is at least doubled. Additionally, the Phe ζ and Trp η2 positions become labeled. In the aliphatic side chains, labeling using erythrose yields isolated {sup 13}C labels for certain positions, like Ile β and His β, making these sites suitable for dynamics studies. Using erythrose instead of glucose as a source for site-selective {sup 13}C labeling enables unique or superior labeling for certain positions and is thereby expanding the toolbox for customized isotope labeling of amino-acid side-chains.

  9. High level waste repository site suitability criteria. Environmental impact statement methodology

    International Nuclear Information System (INIS)

    1977-06-01

    The approach (methodology) which has been developed for the preparation of the environmental impact statement (EIS) is described. A suggested outline is presented for the High Level Waste Repository Site Suitability Criteria EIS together with a detailed description of the approach to be used in preparing the EIS. In addition, a methodology is presented by which the necessary cost/benefit/risk comparisons of alternative sets of site suitability criteria can be made. The TERA environmental research data bank, a computerized data bank which contained information on current and historical licensing activities for power plants was modified to include information on generic or programmatic EIS related issues. The content of the modified data bank was utilized to develop the EIS outline presented in this report. The report recommends that a modified matrix evaluation approach be used to make the cost/benefit/risk comparisons. The suggested matrix is designed to facilitate between criteria comparative analyses of economic, environmental, sociological and radiological risk factors. The quantitative compositing of dollar cost and benefits, environmental and sociological impacts, and radiological risks is to be performed using a semi-analytical, semi-visual procedure based on the concept of ''decision surfaces.''

  10. Siting guidelines and their role in repository site selection

    International Nuclear Information System (INIS)

    Hanlon, C.L.

    1985-01-01

    The first requirement of the Nuclear Waste Policy Act was for the Secretary of Energy to issue general guidelines for siting repositories. The guidelines were to specify detailed geologic considerations that would be the primary criteria for the selection of sites in various host rocks, as well as factors that would qualify or disqualify any site from development as a repository. These guidelines were clearly intended to provide not only the framework for the siting program but also the stimulus for establishing effective communication and consultation among the parties involved in the program. The Act further required that the guidelines be a factor in the development of all future decision documents of the Office of Civilian Radioactive Waste Management, including the environmental assessments that would accompany the nomination of sites for characterization, the site-characterization plans that are to be prepared before the sinking of exploratory shafts at any candidate site, and the environmental impact statement that is to support the recommendation of a site for development as a repository. More than two years after its passage, the intention of the Act for the guidelines has been realized. Concurred in by the Nuclear Regulatory Commission on June 22, 1984, and issued by the Department in November 1984, the guidelines include postclosure technical guidelines that apply to conditions governing the long-term performance of the repository system; preclosure technical guidelines that apply to conditions governing the siting, construction, operation, and closure of the repository; and system guidelines whose objective is to ensure that the regulatory requirements of the Environmental Protection Agency and the Nuclear Regulatory Commission are met

  11. Methodology to evaluate the site standard seismic motion to a nuclear facility

    International Nuclear Information System (INIS)

    Soares, W.A.

    1983-01-01

    For the seismic design of nuclear facilities, the input motion is normally defined by the predicted maximum ground horizontal acceleration and the free field ground response spectrum. This spectrum is computed on the basis of records of strong motion earthquakes. The pair maximum acceleration-response spectrum is called the site standard seismic motion. An overall view of the subjects involved in the determination of the site standard seismic motion to a nuclear facility is presented. The main topics discussed are: basic principles of seismic instrumentation; dynamic and spectral concepts; design earthquakes definitions; fundamentals of seismology; empirical curves developed from prior seismic data; available methodologies and recommended procedures to evaluate the site standard seismic motion. (Author) [pt

  12. Resource selection for an interdisciplinary field: a methodology.

    Science.gov (United States)

    Jacoby, Beth E; Murray, Jane; Alterman, Ina; Welbourne, Penny

    2002-10-01

    The Health Sciences and Human Services Library of the University of Maryland developed and implemented a methodology to evaluate print and digital resources for social work. Although this methodology was devised for the interdisciplinary field of social work, the authors believe it may lend itself to resource selection in other interdisciplinary fields. The methodology was developed in response to the results of two separate surveys conducted in late 1999, which indicated improvement was needed in the library's graduate-level social work collections. Library liaisons evaluated the print collection by identifying forty-five locally relevant Library of Congress subject headings and then using these subjects or synonymous terms to compare the library's titles to collections of peer institutions, publisher catalogs, and Amazon.com. The collection also was compared to social work association bibliographies, ISI Journal Citation Reports, and major social work citation databases. An approval plan for social work books was set up to assist in identifying newly published titles. The library acquired new print and digital social work resources as a result of the evaluation, thus improving both print and digital collections for its social work constituents. Visibility of digital resources was increased by cataloging individual titles in aggregated electronic journal packages and listing each title on the library Web page.

  13. Methodology for ranking restoration options

    International Nuclear Information System (INIS)

    Hedemann Jensen, Per

    1999-04-01

    The work described in this report has been performed as a part of the RESTRAT Project FI4P-CT95-0021a (PL 950128) co-funded by the Nuclear Fission Safety Programme of the European Commission. The RESTRAT project has the overall objective of developing generic methodologies for ranking restoration techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps: characterisation of relevant contaminated sites; identification and characterisation of relevant restoration techniques; assessment of the radiological impact; development and application of a selection methodology for restoration options; formulation of generic conclusions and development of a manual. The project is intended to apply to situations in which sites with nuclear installations have been contaminated with radioactive materials as a result of the operation of these installations. The areas considered for remedial measures include contaminated land areas, rivers and sediments in rivers, lakes, and sea areas. Five contaminated European sites have been studied. Various remedial measures have been envisaged with respect to the optimisation of the protection of the populations being exposed to the radionuclides at the sites. Cost-benefit analysis and multi-attribute utility analysis have been applied for optimisation. Health, economic and social attributes have been included and weighting factors for the different attributes have been determined by the use of scaling constants. (au)

  14. An integrated approach to site selection for nuclear power plants

    International Nuclear Information System (INIS)

    Hassan, E.M.A.

    1975-01-01

    A method of analysing and evaluating the large number of factors influencing site selection is proposed, which can interrelate these factors and associated problems in an integrated way and at the same time establish a technique for site evaluation. The objective is to develop an integrated programme that illustrates the complexity and dynamic interrelationships of the various factors to develop an improved understanding of the functions and objectives of siting nuclear power plants and would aim finally at the development of an effective procedure and technique for site evaluation and/or comparative evaluation for making rational site-selection decisions. (author)

  15. Low-level waste disposal site selection demonstration

    International Nuclear Information System (INIS)

    Rogers, V.C.

    1984-01-01

    This paper discusses the results of recent studies undertaken at EPRI related to low-level waste disposal technology. The initial work provided an overview of the state of the art including an assessment of its influence upon transportation costs and waste form requirements. The paper discusses work done on the overall system design aspects and computer modeling of disposal site performance characteristics. The results of this analysis are presented and provide a relative ranking of the importance of disposal parameters. This allows trade-off evaluations to be made of factors important in the design of a shallow land burial facility. To help minimize the impact of a shortage of low-level radioactive waste disposal sites, EPRI is closely observing the development of bellweather projects for developing new sites. The purpose of this activity is to provide information about lessons learned in those projects in order to expedite the development of additional disposal facilities. This paper describes most of the major stems in selecting a low-level radioactive waste disposal site in Texas. It shows how the Texas Low-Level Radioactive Waste Disposal Authority started with a wide range of potential siting areas in Texas and narrowed its attention down to a few preferred sites. The parameters used to discriminate between large areas of Texas and, eventually, 50 candidate disposal sites are described, along with the steps in the process. The Texas process is compared to those described in DOE and EPRI handbooks on site selection and to pertinent NRC requirements. The paper also describes how an inventory of low-level waste specific to Texas was developed and applied in preliminary performance assessments of two candidate sites. Finally, generic closure requirements and closure operations for low-level waste facilities in arid regions are given

  16. Methodological guide: management of industrial sites potentially contaminated by radioactive substances; Guide methodologique: gestion des sites industriels potentiellement contamines par des substances radioactives

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    At the request of the Ministries of Health and the Environment, IPSN is preparing and publishing the first version of the methodological guide devoted to managing industrial sites potentially contaminated by radioactive substances. This guide describes a procedure for defining and choosing strategies for rehabilitating such industrial sites. (author)

  17. Conflict between public perceptions and technical processes in site selection

    International Nuclear Information System (INIS)

    Avant, R.V. Jr.; Jacobi, L.R.

    1985-01-01

    U.S. Nuclear Regulatory Commission regulations and guidance on site selection are based on sound technical reasoning. Geology, hydrology, flora and fauna, transportation, demographics, and sociopolitical concerns, to name a few, have been factored into the process. Regardless of the technical objectivity of a site selection process, local opposition groups will challenge technical decisions using technical, nontechnical, and emotional arguments. This paper explores the many conflicts between public perceptions, technical requirements designed to protect the general public, and common arguments against site selection. Ways to deal with opposition are also discussed with emphasis placed on developing effective community relations

  18. A methodology for evaluating alternative sites for a near-surface radioactive waste repository

    International Nuclear Information System (INIS)

    Watson, S.R.; Brownlow, S.A.

    1986-02-01

    This report addresses the issue of constructing an evaluation procedure for a near-surface radioactive waste repository. It builds on earlier work of the authors, and describes a basis for a practicable methodology for assessing the relative merits of different sites. (author)

  19. Selection of den sites by black bears in the southern Appalachians

    Science.gov (United States)

    Reynolds-Hogland, M. J.; Mitchell, M.S.; Powell, R.A.; Brown, D.C.

    2007-01-01

    We evaluated selection of den sites by American black bears (Ursus americanus) in the Pisgah Bear Sanctuary, western North Carolina, by comparing characteristics of dens at 53 den sites with availability of habitat characteristics in annual home ranges of bears and in the study area. We also tested whether den-site selection differed by sex, age, and reproductive status of bears. In addition, we evaluated whether the den component of an existing habitat model for black bears predicted where bears would select den sites. We found bears selected den sites far from gravel roads, on steep slopes, and at high elevations relative to what was available in both annual home ranges and in the study area. Den-site selection did not differ by sex or age, but it differed by reproductive status. Adult females with cubs preferred to den in areas that were relatively far from gravel roads, but adult females without cubs did not. The habitat model overestimated the value of areas near gravel roads, underestimated the value of moderately steep areas, and did not include elevation as a predictor variable. Our results highlight the importance of evaluating den selection in terms of both use and availability of den characteristics. ?? 2007 American Society of Mammalogists.

  20. Application of a safety assessment methodology to a hypothetical surface disposal at Serpong site, Indonesia

    International Nuclear Information System (INIS)

    Lubis, E.; Mallants, D.; Volckaert, G.; Marivoet, J.; Neerdael, B.

    2000-01-01

    A preliminary and generic safety assessment of a candidate shallow land burial (SLB) repository at Serpong site, Indonesia, has been performed. The step-by-step safety assessment methodology included an analysis of features, events, and processes (FEPs), and mathematical modelling of radionuclide migration in the near field, geosphere and biosphere. On the basis of an extensive FEP catalogue the most relevant scenarios to be considered in the consequence analysis were selected. Both the normal evolution scenario (NES) and the alternative scenarios were identified. On the basis of these scenarios a conceptual model that included all the important physical-chemical processes was built for the near field and geosphere. A two-dimensional numerical model was then used to solve the governing flow and transport equations for appropriate initial and boundary conditions. The calculations were performed using a repository-specific value for the total disposed activity in combination with hypothetical values for radionuclide composition based on a typical radionuclide content of low level waste in Belgium. Site-specific data on hydrogeological properties were used for the geosphere calculations. Typical results of the consequence analysis in terms of radionuclide fluxes to the geosphere and radionuclide concentrations in the groundwater are discussed. (author)

  1. Methodology for calculating guideline concentrations for safety shot sites

    International Nuclear Information System (INIS)

    1997-06-01

    Residual plutonium (Pu), with trace quantities of depleted uranium (DU) or weapons grade uranium (WU), exists in surficial soils at the Nevada Test Site (NTS), Nellis Air Force Range (NAFR), and the Tonopah Test Range (TTR) as the result of the above-ground testing of nuclear weapons and special experiments involving the detonation of plutonium-bearing devices. The special experiments (referred to as safety shots) involving plutonium-bearing devices were conducted to study the behavior of Pu as it was being explosively compressed; ensure that the accidental detonation of the chemical explosive in a production weapon would not result in criticality; evaluate the ability of personnel to manage large-scale Pu dispersal accidents; and develop criteria for transportation and storage of nuclear weapons. These sites do not pose a health threat to either workers or the general public because they are under active institutional control. The DOE is committed to remediating the safety shot sites so that radiation exposure to the public, both now and in the future, will be maintained within the established limits and be as low as reasonably achievable. Remediation requires calculation of a guideline concentration for the Pu, U, and their decay products that are present in the surface soil. This document presents the methodology for calculating guideline concentrations of weapons grade plutonium, weapons grade uranium, and depleted uranium in surface soils at the safety shot sites. Emphasis is placed on obtaining site-specific data for use in calculating dose to potential residents from the residual soil contamination

  2. Methodology for calculating guideline concentrations for safety shot sites

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    Residual plutonium (Pu), with trace quantities of depleted uranium (DU) or weapons grade uranium (WU), exists in surficial soils at the Nevada Test Site (NTS), Nellis Air Force Range (NAFR), and the Tonopah Test Range (TTR) as the result of the above-ground testing of nuclear weapons and special experiments involving the detonation of plutonium-bearing devices. The special experiments (referred to as safety shots) involving plutonium-bearing devices were conducted to study the behavior of Pu as it was being explosively compressed; ensure that the accidental detonation of the chemical explosive in a production weapon would not result in criticality; evaluate the ability of personnel to manage large-scale Pu dispersal accidents; and develop criteria for transportation and storage of nuclear weapons. These sites do not pose a health threat to either workers or the general public because they are under active institutional control. The DOE is committed to remediating the safety shot sites so that radiation exposure to the public, both now and in the future, will be maintained within the established limits and be as low as reasonably achievable. Remediation requires calculation of a guideline concentration for the Pu, U, and their decay products that are present in the surface soil. This document presents the methodology for calculating guideline concentrations of weapons grade plutonium, weapons grade uranium, and depleted uranium in surface soils at the safety shot sites. Emphasis is placed on obtaining site-specific data for use in calculating dose to potential residents from the residual soil contamination.

  3. Site identification presentation: Basalt Waste Isolation Project

    International Nuclear Information System (INIS)

    1979-11-01

    The final step in the site identification process for the Basalt Waste Isolation Project is described. The candidate sites are identified. The site identification methodology is presented. The general objectives which must be met in selecting the final site are listed. Considerations used in the screening process are also listed. Summary tables of the guidelines used are included

  4. A multiattribute utility analysis of sites nominated for characterization for the first radioactive-waste repository: A decision-aiding methodology

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In December 1984, the Department of Energy (DOE) published draft environmental assessments (EAs) to support the proposed nomination of five sites and the recommendation of three sites for characterization for the first radioactive-waste repository. A chapter common to all the draft EAs (Chapter 7) presented rankings of the five sites against the postclosure and the preclosure technical siting guidelines. To determine which three sites appeared most favorable for recommendation for characterization, three simple quantitative methods were used to aggregate the rankings assigned to each site for the various technical guidelines. In response to numerous comments on the methods, the DOE has undertaken a formal application of one of them (hereafter referred to as the decision-aiding methodology) for the purpose of obtaining a more rigorous evaluation of the nominated sites. The application of the revised methodology is described in this report. The method of analysis is known as multiattribute utility analysis; it is a tool for providing insights as to which sites are preferable and why. The decision-aiding methodology accounts for all the fundamental considerations specified by the siting guidelines and uses as source information the data and evaluations reported or referenced in the EAs. It explicitly addresses the uncertainties and value judgments that are part of all siting problems. Furthermore, all scientific and value judgments are made explicit for the reviewer. An independent review of the application of the decision-aiding methodology has been conducted by the Board on Radioactive Waste Management of the National Academy of Sciences; the comments of the Board are included as an appendix to this report.

  5. A multiattribute utility analysis of sites nominated for characterization for the first radioactive-waste repository: A decision-aiding methodology

    International Nuclear Information System (INIS)

    1986-05-01

    In December 1984, the Department of Energy (DOE) published draft environmental assessments (EAs) to support the proposed nomination of five sites and the recommendation of three sites for characterization for the first radioactive-waste repository. A chapter common to all the draft EAs (Chapter 7) presented rankings of the five sites against the postclosure and the preclosure technical siting guidelines. To determine which three sites appeared most favorable for recommendation for characterization, three simple quantitative methods were used to aggregate the rankings assigned to each site for the various technical guidelines. In response to numerous comments on the methods, the DOE has undertaken a formal application of one of them (hereafter referred to as the decision-aiding methodology) for the purpose of obtaining a more rigorous evaluation of the nominated sites. The application of the revised methodology is described in this report. The method of analysis is known as multiattribute utility analysis; it is a tool for providing insights as to which sites are preferable and why. The decision-aiding methodology accounts for all the fundamental considerations specified by the siting guidelines and uses as source information the data and evaluations reported or referenced in the EAs. It explicitly addresses the uncertainties and value judgments that are part of all siting problems. Furthermore, all scientific and value judgments are made explicit for the reviewer. An independent review of the application of the decision-aiding methodology has been conducted by the Board on Radioactive Waste Management of the National Academy of Sciences; the comments of the Board are included as an appendix to this report

  6. Effects of intraguild predators on nest-site selection by prey.

    Science.gov (United States)

    Huang, Wen-San; Pike, David A

    2012-01-01

    Nest-site selection involves tradeoffs between the risk of predation (on females and/or nests) and nest-site quality (microenvironment), and consequently suitable nesting sites are often in limited supply. Interactions with "classical" predators (e.g., those not competing for shared resources) can strongly influence nest-site selection, but whether intraguild predation also influences this behavior is unknown. We tested whether risk of predation from an intraguild predator [the diurnal scincid lizard Eutropis (Mabuya) longicaudata] influences nest-site selection by its prey (the nocturnal gecko Gekko hokouensis) on Orchid Island, Taiwan. These two species putatively compete for shared resources, including invertebrate prey and nesting microhabitat, but the larger E. longicaudata also predates G. hokouensis (but not its hard-shelled eggs). Both species nested within a concrete wall containing a series of drainage holes that have either one ("closed-in") or two openings ("open"). In allopatry, E. longicaudata preferred to nest within holes that were plugged by debris (thereby protecting eggs from water intrusion), whereas G. hokouensis selected holes that were open at both ends (facilitating escape from predators). When we experimentally excluded E. longicaudata from its preferred nesting area, G. hokouensis not only nested in higher abundances, but also modified its nest-site selection, such that communal nesting was more prevalent and both open and closed-in holes were used equally. Egg viability was unaffected by the choice of hole type, but was reduced slightly (by 7%) in the predator exclusion area (presumably due to higher local incubation temperatures). Our field experiment demonstrates that intraguild predators can directly influence the nest density of prey by altering maternal nest-site selection behavior, even when the predator and prey are active at different times of day and the eggs are not at risk of predation.

  7. Study of decision framework of offshore wind power station site selection based on ELECTRE-III under intuitionistic fuzzy environment: A case of China

    International Nuclear Information System (INIS)

    Wu, Yunna; Zhang, Jinying; Yuan, Jianping; Geng, Shuai; Zhang, Haobo

    2016-01-01

    Highlights: • A novel MCDM framework is applied to assist group decision in OWPS site selection. • The index system consisting of veto and evaluation criteria is constructed. • A case study is carried five sites in coastal areas of Shandong in East China. - Abstract: Offshore wind power projects have been rapidly proposed in China due to policy promotion. Site selection immensely decides the success of any offshore wind power development and is a complex multi-criteria decision making (MCDM) problem. However, canonical MCDM methods tend to fail the site selection process due to the following three problems. Firstly, the compensation problem exists in information processing. Secondly, there exists the problem of incomplete utilization of decision information and information loss in the decision process. Thirdly, the interaction problem in the fuzzy environment is easy to be ignored. To deal with the above problems, this study builds a framework for offshore wind farm site selection decision utilizing Elimination et Choix Traduisant la Realité-III (ELECTRE-III) in the intuitionistic fuzzy environment. First of all, the comprehensive index system of OWPS site selection consisting of veto criteria and evaluation criteria is constructed. Then, the intuitionistic fuzzy set is used in the group decision for the decision makers to express the imperfect knowledge. Moreover, the generalized intuitionistic fuzzy ordered weighted geometric interaction averaging (GIFWGIA) operator is applied to deal with the interaction problem. Together with the likelihood-based valued comparisons, imprecise decision information is reasonably used and information loss problem is rationally avoided. Then a case of China is studied based on the proposed framework, demonstrating the site selection methodology valid and practical. This study implements evaluation method for offshore wind power site selection and also provides a theoretical basis for the development of offshore wind power

  8. Overview of a performance assessment methodology for low-level radioactive waste disposal facilities

    International Nuclear Information System (INIS)

    Kozak, M.W.; Chu, M.S.Y.

    1991-01-01

    A performance assessment methodology has been developed for use by the US Nuclear Regulatory Commission in evaluating license applications for low-level waste disposal facilities. This paper provides a summary and an overview of the modeling approaches selected for the methodology. The overview includes discussions of the philosophy and structure of the methodology. This performance assessment methodology is designed to provide the NRC with a tool for performing confirmatory analyses in support of license reviews related to postclosure performance. The methodology allows analyses of dose to individuals from off-site releases under normal conditions as well as on-site doses to inadvertent intruders. 24 refs., 1 tab

  9. Site selection of nuclear power plants

    International Nuclear Information System (INIS)

    Schnappauf, W.

    1982-01-01

    A stock report of the development of the extent as well as the fundamentals of the conflict about nuclear energy shows that the effective law is both another cause and a mirror of the discussions about it. In total the investigation shows that the planning of site selection suffers from a number of legal problems. They are mainly of structural kind and are concerned with the issues of citizens' participation and graduation of procedures which are central for the management of the conflict. Therefore the present set of instruments is hardly able to contribute to increasing the acceptancy. The kind and extent of issues on one hand as well as the dimension of the conflict on the other make clear that the executive power itself is overtaxed. In this situation the legislative authorities are called up to take responsibility upon themselves. There are no objections from the constitutional or other aspects to legal site selection. (orig./HSCH) [de

  10. Site selection criteria for the shallow land burial of low-level radioactive waste

    International Nuclear Information System (INIS)

    Falconer, K.L.; Hull, L.C.; Mizell, S.A.

    The shallow land burial of low-level waste must be accomplished in a manner that ensures the public and biosphere are protected from harmful amounts of radiation. This can be attained by selecting, designing, operating and closing sites such that contaminants never leave the site boundary in levels above regulatory limits. Site design, operation and closure are all functions of the characteristics of the site selected. As a result, the site selection process offers the most effective means for optimizing safe, efficient and economical low-level waste burial practices. The purpose of this document is to set forth criteria for the selection of shallow land burial sites. Criteria are standard rules, by which the ability of a site to meet waste management goals can be judged. They are comprehensive, universal, and qualitative and are applicable in any geologic environment. Site selection criteria provide the framework for the siting process

  11. PLEIADES ABSOLUTE CALIBRATION : INFLIGHT CALIBRATION SITES AND METHODOLOGY

    Directory of Open Access Journals (Sweden)

    S. Lachérade

    2012-07-01

    Full Text Available In-flight calibration of space sensors once in orbit is a decisive step to be able to fulfil the mission objectives. This article presents the methods of the in-flight absolute calibration processed during the commissioning phase. Four In-flight calibration methods are used: absolute calibration, cross-calibration with reference sensors such as PARASOL or MERIS, multi-temporal monitoring and inter-bands calibration. These algorithms are based on acquisitions over natural targets such as African deserts, Antarctic sites, La Crau (Automatic calibration station and Oceans (Calibration over molecular scattering or also new extra-terrestrial sites such as the Moon and selected stars. After an overview of the instrument and a description of the calibration sites, it is pointed out how each method is able to address one or several aspects of the calibration. We focus on how these methods complete each other in their operational use, and how they help building a coherent set of information that addresses all aspects of in-orbit calibration. Finally, we present the perspectives that the high level of agility of PLEIADES offers for the improvement of its calibration and a better characterization of the calibration sites.

  12. Methodological guide for risk assessment and management of industrial sites contaminated with radionuclides

    International Nuclear Information System (INIS)

    Oudiz, A.; Brenot, J.; Cessac, B.; Charbonneau, P.; Maigne, J.P.; Santucci, P.

    2000-01-01

    At the request of the French ministries of health and environment, IPSN was asked to elaborate a methodological guide for risk assessment and management of industrial sites contaminated with radionuclides. This guide is devoted to local administration, technical organisms and more generally to all the relevant stakeholders involved with the choice of a rehabilitation strategy, according to the future use of the site. The methodology to be presented is designed to fit with the different types of 'risk governance', according to circumstances: - when an industrial site is relatively small, with rather restricted zones of contamination, and no specific social concern, management may rely essentially upon radiological expertise, using generic reference levels, - when the site is larger, with spread out contamination, risk assessment and management of the site may become more controversial, namely because uncertainties remain about the effective magnitude of the contamination and no low cost solution appears to exist in view of rehabilitation. In this case, an open procedure is required, which combines technical expertise and involvement of stakeholders, in view of improving the risk assessment process as well as trying to get a better understanding of the benefits and drawbacks of different rehabilitation strategies. The methodology consists of six main steps : - Initiating the process, Pre-diagnosis, Initial diagnosis, Simplified risk assessment, Detailed risk assessment, Decision aiding in view of letting the stakeholders defining the solution appropriate to the local context. The paper will present how the risk assessment and management process can be aportionated to the importance of the problem to be solved. As far as possible, simplified risk assessment should provide information allowing the definition of the appropriate strategy. In this case, stakeholders involvement is mainly devoted to determine: - whether the site can be affected to a given use without

  13. Technical, normative and social aspects of the site selection process for radioactive waste repositories

    International Nuclear Information System (INIS)

    Branco, Otavio E.A.; Rodrigues, Paulo C.H.; Carvalho Filho, Carlos A.; Cota, Stela D.S.; Ferreira, Vinicius V.M.; Peres, Sueli S.; Hiromoto, Goro

    2009-01-01

    In force since 2001, the Federal Law 10.308 states, in article 37, that the Comissao Nacional de Energia Nuclear - CNEN should start studies for the implementation of a final radioactive waste repository, 'in the shortest timeframe technically feasible'. Nevertheless, not only technical aspects have to be taken into account to accomplish with this schedule, but, also factors of political, economic and social nature. In this paper, the importance and impact of public acceptance aspects are discussed, as well as the methodology of site selection for radioactive wastes repositories, and proposals to accommodate the emanated criteria from the existing legislation. Additionally, practical results from the international experience in the implementation of such deposits are presented. (author)

  14. Directing reaction pathways by catalyst active-site selection using self-assembled monolayers.

    Science.gov (United States)

    Pang, Simon H; Schoenbaum, Carolyn A; Schwartz, Daniel K; Medlin, J Will

    2013-01-01

    One key route for controlling reaction selectivity in heterogeneous catalysis is to prepare catalysts that exhibit only specific types of sites required for desired product formation. Here we show that alkanethiolate self-assembled monolayers with varying surface densities can be used to tune selectivity to desired hydrogenation and hydrodeoxygenation products during the reaction of furfural on supported palladium catalysts. Vibrational spectroscopic studies demonstrate that the selectivity improvement is achieved by controlling the availability of specific sites for the hydrogenation of furfural on supported palladium catalysts through the selection of an appropriate alkanethiolate. Increasing self-assembled monolayer density by controlling the steric bulk of the organic tail ligand restricts adsorption on terrace sites and dramatically increases selectivity to desired products furfuryl alcohol and methylfuran. This technique of active-site selection simultaneously serves both to enhance selectivity and provide insight into the reaction mechanism.

  15. Assessment of Public Acceptability in LILW Repository Site Selection Process in Slovenia

    International Nuclear Information System (INIS)

    Zeleznik, N.; Kralj, M.; Polic, M.; Kos, D.

    2006-01-01

    Slovenian national agency for radioactive waste management ARAO has after longer period of preparation activities started with the more direct work on the site selection process for low and intermediate level waste (LILW) repository. In November 2004, the official administrative procedure for the siting of the repository started with the First public conference on spatial planning issues carried out by the Ministry of Environment and Spatial Planning together with ARAO. Just after the conference the Program for the preparation of the Detailed plan of national importance for the LILW repository was accepted by the Ministry. ARAO invited in the beginning of December 2004 all local communities in Slovenia (except 3 of them which have already refused to cooperate) to participate and volunteer a site or area in their local community for further investigation. The invitation for the application of local communities provided clear instructions on how to participate in further determination of potentially suitable sites and under what conditions. By the beginning of April 2005 ARAO finished the bidding process with 8 applications of local communities which decided to participate in the further site selection for LILW repository. Due to the financial and other limitations (human resources, spatial planning procedure, etc.) only in maximum three local communities further characterization could be performed. Therefore prefeasibility study of all volunteer local communities was conducted in which besides technical, environmental and spatial availability also public acceptability should be assessed. For assessment of public acceptability the methodology has been prepared which includes objective parameters of local environment (such as demographic data, economy, infrastructure and social issues in relation to the repository) as well as subjective values (attitudes of individual groups - opinion makers, politicians and all residents - to the sitting and construction of LILW

  16. A Case Study in the Mars Landing Site Selection for Science Objects

    Directory of Open Access Journals (Sweden)

    Haingja Seo

    2012-12-01

    Full Text Available It is a crucial matter to select a landing site for landers or rovers in planning the Mars exploration. The landing site must have not only a scientific value as a landing site, but also geographical features to lead a safe landing for Mars probes. In this regard, this study analyzed landing site of Mars probes and rovers in previous studies and discussed the adequacy of the landing site to scientific missions. Moreover, this study also examined domestic studies on the Mars. The frameworks of these studies will guide the selection of exploration sites and a landing site when sending Mars probe to the Mars through our own efforts. Additionally, this paper will be used as the preliminary data for selection of exploration site and a landing site.

  17. Site-selective spectroscopy of Er in GaN

    International Nuclear Information System (INIS)

    Dierolf, V.; Sandmann, C.; Zavada, J.; Chow, P.; Hertog, B.

    2004-01-01

    We investigated different Er 3+ defect sites found in Er-doped GaN layers by site-selective combined excitation-emission spectroscopy and studied the role of these sites in different direct and multistep excitation schemes. The layers were grown by molecular beam epitaxy and were 200 nm thick. Two majority sites were found along with several minority sites. The sites strongly differ in excitation and energy transfer efficiencies as well as branching ratios during relaxation. For this reason, relative emission intensities from these sites depend strongly on emission and excitation. The sites were identified for several transitions and a comprehensive list of energy levels has been compiled. One of the minority sites appears strongly under ultraviolet excitation above the GaN band gap suggesting that this site is an excellent trap for excitation energy of electron-hole pairs

  18. Using maximum entropy modeling for optimal selection of sampling sites for monitoring networks

    Science.gov (United States)

    Stohlgren, Thomas J.; Kumar, Sunil; Barnett, David T.; Evangelista, Paul H.

    2011-01-01

    Environmental monitoring programs must efficiently describe state shifts. We propose using maximum entropy modeling to select dissimilar sampling sites to capture environmental variability at low cost, and demonstrate a specific application: sample site selection for the Central Plains domain (453,490 km2) of the National Ecological Observatory Network (NEON). We relied on four environmental factors: mean annual temperature and precipitation, elevation, and vegetation type. A “sample site” was defined as a 20 km × 20 km area (equal to NEON’s airborne observation platform [AOP] footprint), within which each 1 km2 cell was evaluated for each environmental factor. After each model run, the most environmentally dissimilar site was selected from all potential sample sites. The iterative selection of eight sites captured approximately 80% of the environmental envelope of the domain, an improvement over stratified random sampling and simple random designs for sample site selection. This approach can be widely used for cost-efficient selection of survey and monitoring sites.

  19. A Methodology for Collective Evaluation and Selection of Industrial R&D Projects

    OpenAIRE

    Muhittin Oral; Ossama Kettani; Pascal Lang

    1991-01-01

    This paper proposes a methodology for evaluating and selecting R&D projects in a collective decision setting, especially useful at sectorial and national levels. It consists of two major phases: Evaluation and Selection. The evaluation process repeatedly uses mathematical programming models to determine the "relative values" of a given R&D project from the viewpoint of the other R&D projects. The selection process of R&D projects is based on these "relative values" and is done through a model...

  20. Study of a conceptual nuclear energy center at Green River, Utah. Site selection

    International Nuclear Information System (INIS)

    1981-08-01

    The siting requirements are described for a NEC. The methodology used, primary and secondary screening criteria and the results and conclusions are also presented. Appended to the report are detailed discussions of two siting factors, and evaluation of Nuclear Regulatory Commission (NRC) demographic siting criteria and a fatal flaw analyses for terrestrial and aquatic ecology

  1. Study of a conceptual nuclear energy center at Green River, Utah. Site selection

    Energy Technology Data Exchange (ETDEWEB)

    1981-08-01

    The siting requirements are described for a NEC. The methodology used, primary and secondary screening criteria and the results and conclusions are also presented. Appended to the report are detailed discussions of two siting factors, and evaluation of Nuclear Regulatory Commission (NRC) demographic siting criteria and a fatal flaw analyses for terrestrial and aquatic ecology.

  2. Site selection for Canada's national repository for used nuclear fuel

    International Nuclear Information System (INIS)

    Ben Belfadhel, M.; Watts, B.; Facella, J.

    2015-01-01

    In 2007, the Government of Canada selected Adaptive Phased Management as Canada's plan for the long-term management of Canada's used nuclear fuel. The approach provides for containment and isolation of the material in a deep geological repository at a safe site with an informed and willing host. The Nuclear Waste Management Organization is tasked through federal legislation with selecting the site and developing and managing all aspects of the plan. In May 2010, the organization published and initiated the site selection process that serves as a road map for decision making on the location for the deep geological repository. It continues to lead the site selection process for the repository and an associated Centre of Expertise. The screening process is advancing and, from an initial starting point of 22 communities expressing interest in learning about the project; as of September 2015, 9 communities are the focus of more detailed technical and community well-being studies. Preliminary Assessments, the third step in the 9-step site selection process are underway in these communities. The Assessments involve preliminary technical and social desktop and field assessments, engagement activities within and beyond each interested community, and involvement of Indigenous peoples and nearby municipalities in the planning and conduct of the work. This paper provides an update on the advancement of the site selection process. It describes the nature of the technical and social studies being conducted at this phase of work, including the progressively more detailed field studies that are the focus of technical work at the current stage, the approach to engagement and collaboration with communities to direct these studies, and the work underway to ensure the framework used for this assessment and engagement includes the range of priorities and perspectives of First Nations and Metis peoples and communities in the broader area. (author)

  3. Methodology of site generation for evaluation of the behaviour of radioactive waste storage

    International Nuclear Information System (INIS)

    Ruiz Rivas, C.; Eguilior Diez, S.

    1997-01-01

    The present report summarizes the purpose of methodology for the site generation in the evaluation of high-level radioactive waste storage for long-term. This work is developed into the project Safety analysis long-term of high-level radioactive waste. This project is carried on for CIEMAT and ENRESA

  4. Methodology for the selection of alternatives to the waterfall division of hydro graphical basin, considering environmental impacts

    International Nuclear Information System (INIS)

    Cunha, S.H.F. da; Pires, S.H.; Rovere, E.L. La; Pereira, M.V.F.

    1993-01-01

    This paper presents the many stages of a new methodology propose to selection of alternatives of waterfall division of hydro graphical basin considering environmental impacts. The methodology uses the techniques of hierarchical analysis in evaluation of environmental impacts, simulation the individualized power plants in energy evaluation and multi-objective analysis in selection of better alternative of division of basin waterfall. The methodology still foresee moments and mechanisms to take into account the opinion of different social sectors. (C.M.)

  5. Controlling site selectivity in Pd-catalyzed oxidative cross-coupling reactions.

    Science.gov (United States)

    Lyons, Thomas W; Hull, Kami L; Sanford, Melanie S

    2011-03-30

    This paper presents a detailed investigation of the factors controlling site selectivity in the Pd-mediated oxidative coupling of 1,3-disubstituted and 1,2,3-trisubstituted arenes (aryl-H) with cyclometalating substrates (L~C-H). The influence of both the concentration and the steric/electronic properties of the quinone promoter are studied in detail. In addition, the effect of steric/electronic modulation of the carboxylate ligand is discussed. Finally, we demonstrate that substitution of the carboxylate for a carbonate X-type ligand leads to a complete reversal in site selectivity for many arene substrates. The origins of these trends in site selectivity are discussed in the context of the mechanism of Pd-catalyzed oxidative cross-coupling.

  6. Patterns of mutation and selection at synonymous sites in Drosophila

    DEFF Research Database (Denmark)

    Singh, Nadia D; Bauer DuMont, Vanessa L; Hubisz, Melissa J

    2007-01-01

    , when applied to 18 coding sequences in 3 species of Drosophila, confirmed an earlier report that the Notch gene in Drosophila melanogaster was evolving under selection in favor of those codons defined as unpreferred in this species. This finding opened the possibility that synonymous sites may...... be subject to a variety of selective pressures beyond weak selection for increased frequencies of the codons currently defined as "preferred" in D. melanogaster. To further explore patterns of synonymous site evolution in Drosophila in a lineage-specific manner, we expanded the application of the maximum...... likelihood framework to 8,452 protein coding sequences with well-defined orthology in D. melanogaster, Drosophila sechellia, and Drosophila yakuba. Our analyses reveal intragenomic and interspecific variation in mutational patterns as well as in patterns and intensity of selection on synonymous sites. In D...

  7. A data-driven multi-model methodology with deep feature selection for short-term wind forecasting

    International Nuclear Information System (INIS)

    Feng, Cong; Cui, Mingjian; Hodge, Bri-Mathias; Zhang, Jie

    2017-01-01

    Highlights: • An ensemble model is developed to produce both deterministic and probabilistic wind forecasts. • A deep feature selection framework is developed to optimally determine the inputs to the forecasting methodology. • The developed ensemble methodology has improved the forecasting accuracy by up to 30%. - Abstract: With the growing wind penetration into the power system worldwide, improving wind power forecasting accuracy is becoming increasingly important to ensure continued economic and reliable power system operations. In this paper, a data-driven multi-model wind forecasting methodology is developed with a two-layer ensemble machine learning technique. The first layer is composed of multiple machine learning models that generate individual forecasts. A deep feature selection framework is developed to determine the most suitable inputs to the first layer machine learning models. Then, a blending algorithm is applied in the second layer to create an ensemble of the forecasts produced by first layer models and generate both deterministic and probabilistic forecasts. This two-layer model seeks to utilize the statistically different characteristics of each machine learning algorithm. A number of machine learning algorithms are selected and compared in both layers. This developed multi-model wind forecasting methodology is compared to several benchmarks. The effectiveness of the proposed methodology is evaluated to provide 1-hour-ahead wind speed forecasting at seven locations of the Surface Radiation network. Numerical results show that comparing to the single-algorithm models, the developed multi-model framework with deep feature selection procedure has improved the forecasting accuracy by up to 30%.

  8. Study on site selection of cold chain logistics in northwest territories

    Science.gov (United States)

    Liu, Yubin; Ren, Zongwei

    2017-08-01

    In this research, we mainly studied the Site selection problem of cold chain logistics in northwest of China. In the first place, we counted the demands of cold chain products in northwest territories, and then classified it into the Site selection problem in five provinces in northwest territories(Xinjiang, Qinghai, Gansu, Ningxia, Shanxi); Next, we used the Center of gravity Method to select initial location; Finally, we established the location of distribution by using Analytic Hierarchy Process (AHP)and fuzzy comprehensive evaluation method. Comparing with the traditional method, this method not only considered the cost of transportation and distance, but also deliberated the physical condition, social environment and economics condition which associated with Site selection problem.

  9. Argentinian experience in selecting sites for nuclear power stations

    International Nuclear Information System (INIS)

    Csik, B.J.

    1975-01-01

    One nuclear power station is in operation in the Republic of Argentina, a second is under construction, and the decision to build a third has been taken. According to existing plans, about ten nuclear power stations should go into operation during the next decade. The present paper analyses the experience acquired in selecting sites for the first units, commenting on the criteria and methods applied, the studies that were carried out, the specific problems encountered and the solutions adopted, as well as on the question of acceptance of the chosen sites by the public. It goes on to describe the current programme of selection and study of sites for future nuclear power stations

  10. IT OUTSOURCING: METHODOLOGY FOR SUPPLIER SELECTION CRITERIA FOR COMPETITIVE ADVANTAGE

    Directory of Open Access Journals (Sweden)

    Sergio Alexandre Simões

    2012-04-01

    Full Text Available Abstract: Two criteria are usually adopted to select the provider of IT: lower prices or better service qualification of the supplier. This article proposes a strategic approach: the company should hire the provider that best leverage their competitive advantages. This approach implied the need to develop a methodology. To support it, the authors analyzed four models, Porter, RBV (Resource-Based View, Balanced Scorecard and the Weapons and Field Competition. Preferred the latter to be the most complete, qualiquantitative technique and able to accurately align the goals of the IT service firm's to competitive contracting strategy. The methodology was developed and applied to an insurance company and in face of the excellent results, decided to write this article to disclose it.

  11. A methodology for selecting optimum organizations for space communities

    Science.gov (United States)

    Ragusa, J. M.

    1978-01-01

    This paper suggests that a methodology exists for selecting optimum organizations for future space communities of various sizes and purposes. Results of an exploratory study to identify an optimum hypothetical organizational structure for a large earth-orbiting multidisciplinary research and applications (R&A) Space Base manned by a mixed crew of technologists are presented. Since such a facility does not presently exist, in situ empirical testing was not possible. Study activity was, therefore, concerned with the identification of a desired organizational structural model rather than the empirical testing of it. The principal finding of this research was that a four-level project type 'total matrix' model will optimize the effectiveness of Space Base technologists. An overall conclusion which can be reached from the research is that application of this methodology, or portions of it, may provide planning insights for the formal organizations which will be needed during the Space Industrialization Age.

  12. Projecting labor demand and worker immigration at nuclear power plant construction sites: an evaluation of methodology

    International Nuclear Information System (INIS)

    Herzog, H.W. Jr; Schlottmann, A.M.; Schriver, W.R.

    1981-12-01

    The study evaluates methodology employed for the projection of labor demand at, and worker migration to, nuclear power plant construction sites. In addition, suggestions are offered as to how this projection methodology might be improved. The study focuses on projection methodologies which forecast either construction worker migration or labor requirements of alternative types of construction activity. Suggested methodological improvements relate both to institutional factors within the nuclear power plant construction industry, and to a better use of craft-specific data on construction worker demand/supply. In addition, the timeliness and availability of the regional occupational data required to support, or implement these suggestions are examined

  13. Nonlinear Time Domain Seismic Soil-Structure Interaction (SSI) Deep Soil Site Methodology Development

    International Nuclear Information System (INIS)

    Spears, Robert Edward; Coleman, Justin Leigh

    2015-01-01

    Currently the Department of Energy (DOE) and the nuclear industry perform seismic soil-structure interaction (SSI) analysis using equivalent linear numerical analysis tools. For lower levels of ground motion, these tools should produce reasonable in-structure response values for evaluation of existing and new facilities. For larger levels of ground motion these tools likely overestimate the in-structure response (and therefore structural demand) since they do not consider geometric nonlinearities (such as gaping and sliding between the soil and structure) and are limited in the ability to model nonlinear soil behavior. The current equivalent linear SSI (SASSI) analysis approach either joins the soil and structure together in both tension and compression or releases the soil from the structure for both tension and compression. It also makes linear approximations for material nonlinearities and generalizes energy absorption with viscous damping. This produces the potential for inaccurately establishing where the structural concerns exist and/or inaccurately establishing the amplitude of the in-structure responses. Seismic hazard curves at nuclear facilities have continued to increase over the years as more information has been developed on seismic sources (i.e. faults), additional information gathered on seismic events, and additional research performed to determine local site effects. Seismic hazard curves are used to develop design basis earthquakes (DBE) that are used to evaluate nuclear facility response. As the seismic hazard curves increase, the input ground motions (DBE's) used to numerically evaluation nuclear facility response increase causing larger in-structure response. As ground motions increase so does the importance of including nonlinear effects in numerical SSI models. To include material nonlinearity in the soil and geometric nonlinearity using contact (gaping and sliding) it is necessary to develop a nonlinear time domain methodology. This

  14. Radiation monitoring methodologies and their applications at BARC site

    International Nuclear Information System (INIS)

    Divkar, J.K.; Chatterjee, M.K.; Patra, R.P; Morali, S.; Singh, Rajvir

    2016-01-01

    Radiation monitoring methodology can be planned for various objectives during normal as well as emergency situations. During radiological emergency, radiation monitoring data provides useful information required for management of the abnormal situation. In order to assess the possible consequences accurately and to implement adequate measure, the emergency management authorities should have a well-prepared monitoring strategy in readiness. Fixed monitoring method is useful to analyze the behavior of nuclear plant site and to develop holistic model for it mobile monitoring is useful for quick impact assessment and will be the backbone of emergency response, particularly in case of non availability of fixed monitoring system caused due to natural disaster like floods, earthquake and tsunami

  15. Materials selection as an interdisciplinary technical activity: basic methodology and case studies

    Directory of Open Access Journals (Sweden)

    M. Ferrante

    2000-04-01

    Full Text Available The technical activity known as Materials Selection is reviewed in its concepts and methodologies. Objectives and strategies are briefly presented and two important features are introduced and discussed; (i Merit Indices: a combination of materials properties, which maximises the objectives chosen by the designer and (ii Materials Properties Maps: a bi-dimensional space whose coordinates are pairs of properties in which materials can be plotted and compared directly in terms of their merit indices. A general strategy for the deduction of these indices is explained and a formal methodology to establish a ranking of candidate materials when multiple constraints intervene is presented. Finally, two case studies are discussed in depth, one related to materials substitution in the context of mechanical design and a less conventional case linking material selection to physical comfort in the home furniture industry.

  16. Radioactive waste isolation in salt: rationale and methodology for Argonne-conducted reviews of site characterization programs

    International Nuclear Information System (INIS)

    Harrison, W.; Ditmars, J.D.; Tisue, M.W.; Hambley, D.F.; Fenster, D.F.; Rote, D.M.

    1985-07-01

    Both regulatory and technical concerns must be addressed in Argonne-conducted peer reviews of site characterization programs for individual sites for a high-level radioactive waste repository in salt. This report describes the regulatory framework within which reviews must be conducted and presents background information on the structure and purpose of site characterization programs as found in US Nuclear Regulatory Commission (NRC) Regulatory Guide 4.17 and Title 10, Part 60, of the Code of Federal Regulations. It also presents a methodology to assist reviewers in addressing technical concerns relating to their respective areas of expertise. The methodology concentrates on elements of prime importance to the US Department of Energy's advocacy of a given salt repository system during the NRC licensing process. Instructions are given for reviewing 12 site characterization program elements, starting with performance objectives, performance issues, and levels of performance of repository subsystem components; progressing through performance assessment; and ending with plans for data acquisition and evaluation. The success of a site characterization program in resolving repository performance issues will be determined by judging the likelihood that the proposed data acquisition activities will reduce uncertainties in the performance predictions. 8 refs., 3 figs., 5 tabs

  17. Reliable Refuge: Two Sky Island Scorpion Species Select Larger, Thermally Stable Retreat Sites.

    Science.gov (United States)

    Becker, Jamie E; Brown, Christopher A

    2016-01-01

    Sky island scorpions shelter under rocks and other surface debris, but, as with other scorpions, it is unclear whether these species select retreat sites randomly. Furthermore, little is known about the thermal preferences of scorpions, and no research has been done to identify whether reproductive condition might influence retreat site selection. The objectives were to (1) identify physical or thermal characteristics for retreat sites occupied by two sky island scorpions (Vaejovis cashi Graham 2007 and V. electrum Hughes 2011) and those not occupied; (2) determine whether retreat site selection differs between the two study species; and (3) identify whether thermal selection differs between species and between gravid and non-gravid females of the same species. Within each scorpion's habitat, maximum dimensions of rocks along a transect line were measured and compared to occupied rocks to determine whether retreat site selection occurred randomly. Temperature loggers were placed under a subset of occupied and unoccupied rocks for 48 hours to compare the thermal characteristics of these rocks. Thermal gradient trials were conducted before parturition and after dispersal of young in order to identify whether gravidity influences thermal preference. Vaejovis cashi and V. electrum both selected larger retreat sites that had more stable thermal profiles. Neither species appeared to have thermal preferences influenced by reproductive condition. However, while thermal selection did not differ among non-gravid individuals, gravid V. electrum selected warmer temperatures than its gravid congener. Sky island scorpions appear to select large retreat sites to maintain thermal stability, although biotic factors (e.g., competition) could also be involved in this choice. Future studies should focus on identifying the various biotic or abiotic factors that could influence retreat site selection in scorpions, as well as determining whether reproductive condition affects thermal

  18. Selecting Health Care Improvement Projects: A Methodology Integrating Cause-and-Effect Diagram and Analytical Hierarchy Process.

    Science.gov (United States)

    Testik, Özlem Müge; Shaygan, Amir; Dasdemir, Erdi; Soydan, Guray

    It is often vital to identify, prioritize, and select quality improvement projects in a hospital. Yet, a methodology, which utilizes experts' opinions with different points of view, is needed for better decision making. The proposed methodology utilizes the cause-and-effect diagram to identify improvement projects and construct a project hierarchy for a problem. The right improvement projects are then prioritized and selected using a weighting scheme of analytical hierarchy process by aggregating experts' opinions. An approach for collecting data from experts and a graphical display for summarizing the obtained information are also provided. The methodology is implemented for improving a hospital appointment system. The top-ranked 2 major project categories for improvements were identified to be system- and accessibility-related causes (45%) and capacity-related causes (28%), respectively. For each of the major project category, subprojects were then ranked for selecting the improvement needs. The methodology is useful in cases where an aggregate decision based on experts' opinions is expected. Some suggestions for practical implementations are provided.

  19. Spectral zone selection methodology for pebble bed reactors

    International Nuclear Information System (INIS)

    Mphahlele, Ramatsemela; Ougouag, Abderrafi M.; Ivanov, Kostadin N.; Gougar, Hans D.

    2011-01-01

    A methodology is developed for determining boundaries of spectral zones for pebble bed reactors. A spectral zone is defined as a region made up of a number of nodes whose characteristics are collectively similar and that are assigned the same few-group diffusion constants. The spectral zones are selected in such a manner that the difference (error) between the reference transport solution and the diffusion code solution takes a minimum value. This is achieved by choosing spectral zones through optimally minimizing this error. The objective function for the optimization algorithm is the total reaction rate error, which is defined as the sum of the leakage, absorption and fission reaction rates errors in each zone. The selection of these spectral zones is such that the core calculation results based on diffusion theory are within an acceptable tolerance as compared to a proper transport reference solution. Through this work, a consistent approach for identifying spectral zones that yield more accurate diffusion results is introduced.

  20. Site survey for nuclear power plants

    International Nuclear Information System (INIS)

    1984-01-01

    This Safety Guide describes the first stage of the siting process for nuclear power plants - the site survey to select one or more preferred candidate sites. Its purpose is to recommend procedures and provide information for use in implementing a part of the Code of Practice on Safety in Nuclear Power Plant Siting (IAEA Safety Series No.50-C-S). The organization, procedures, methodologies, guidance for documenting the site survey process and examples of detailed procedures on some safety-related site characteristics are given in the Guide

  1. Site selection procedure for high level radioactive waste disposal in Bulgaria

    International Nuclear Information System (INIS)

    Evstatiev, D.; Vachev, B.

    1993-01-01

    A combined site selection approach is implemented. Bulgaria's territory has been classified in three categories, presented on a 1:500000 scale map. The number of suitable sites has been reduced to 20 using the method of successive screening. The formulated site selection problem is a typical discrete multi-criteria decision making problem under uncertainty. A 5-level procedure using Expert Choice Rating and relative models is created. It is a part of a common procedure for evaluation and choice of variants for high level radwaste disposal construction. On this basis 7-8 more preferable sites are demonstrated. A new knowledge and information about the relative importance of the criteria and their subsets, about the level of criteria uncertainty and the reliability are gained. It is very useful for planning and managing of the next final stages of the site selection procedure. 7 figs., 8 refs., 4 suppls. (author)

  2. Selective methodology of population dynamics for optimizing a multiobjective environment of job shop production

    Directory of Open Access Journals (Sweden)

    Santiago Ruiz

    2015-01-01

    Full Text Available This paper develops a methodology based on population genetics to improve the performance of two or more variables in job shop production systems. The methodology applies a genetic algorithm with special features in the individual selection when they pass from generation to generation. In comparison with the FIFO method, the proposed methodology showed better results in the variables makespan, idle time and energy cost. When compared with NSGA II, the methodology did not showed relevant differences in makespan and idle time; however better performance was obtained in energy cost and, especially, in the number of required iterations to get the optimal makespan.

  3. A decision methodology for the evaluation of mixed low-level radioactive waste management options for DOE sites

    Energy Technology Data Exchange (ETDEWEB)

    Bassi, J. [Dept. of Energy, Washington, DC (United States); Abashian, M.S.; Chakraborti, S.; Devarakonda, M.; Djordjevic, S.M. [IT Corp., Albuquerque, NM (United States)

    1993-03-01

    Currently, many DOE sites are developing site-specific solutions to manage their mixed low-level wastes. These site-specific MLLW programs often result in duplication of efforts between the different sites, and consequently, inefficient use of DOE system resources. A nationally integrated program for MLLW eliminates unnecessary duplication of effort, but requires a comprehensive analysis of waste management options to ensure that all site issues are addressed. A methodology for comprehensive analysis of the complete DOE MLLW system is being developed by DOE-HQ to establish an integrated and standardized solution for managing MLLW. To be effective, the comprehensive systems analysis must consider all aspects of MLLW management from cradle-to-grave (i.e. from MLLW generation to disposal). The results of the analysis will include recommendations for alternative management options for the complete DOE MLLW system based on various components such as effectiveness, cost, health and safety risks, and the probability of regulatory acceptance for an option. Because of the diverse nature of these various components and the associated difficulties in comparing between them, a decision methodology is being developed that will integrate the above components into a single evaluation scheme for performing relative comparisons between different MLLW management options. The remainder of this paper provides an overview of the roles and responsibilities of the various participants of the DOE MLLW Program, and discusses in detail the components involved in the development of the decision methodology for a comprehensive systems analysis.

  4. Artificial Cavities and Nest Site Selection by Puerto Rican Parrots: a Multiscale Assessment

    Directory of Open Access Journals (Sweden)

    Thomas H. White, Jr.

    2006-12-01

    Full Text Available We examined nest site selection by Puerto Rican Parrots, a secondary cavity nester, at several spatial scales using the nest entrance as the central focal point relative to 20 habitat and spatial variables. The Puerto Rican Parrot is unique in that, since 2001, all known nesting in the wild has occurred in artificial cavities, which also provided us with an opportunity to evaluate nest site selection without confounding effects of the actual nest cavity characteristics. Because of the data limitations imposed by the small population size of this critically endangered endemic species, we employed a distribution-free statistical simulation approach to assess site selection relative to characteristics of used and unused nesting sites. Nest sites selected by Puerto Rican Parrots were characterized by greater horizontal and vertical visibility from the nest entrance, greater density of mature sierra palms, and a more westerly and leeward orientation of nest entrances than unused sites. Our results suggest that nest site selection in this species is an adaptive response to predation pressure, to which the parrots respond by selecting nest sites offering advantages in predator detection and avoidance at all stages of the nesting cycle. We conclude that identifying and replicating the “nest gestalt” of successful nesting sites may facilitate conservation efforts for this and other endangered avian species.

  5. Cell-based land use screening procedure for regional siting analysis

    International Nuclear Information System (INIS)

    Jalbert, J.S.; Dobson, J.E.

    1976-01-01

    An energy facility site-screening methodology which permits the land resource planner to identify candidate siting areas was developed. Through the use of spatial analysis procedures and computer graphics, a selection of candidate areas is obtained. Specific sites then may be selected from among candidate areas for environmental impact analysis. The computerized methodology utilizes a cell-based geographic information system for specifying the suitability of candidate areas for an energy facility. The criteria to be considered may be specified by the user and weighted in terms of importance. Three primary computer programs have been developed. These programs produce thematic maps, proximity calculations, and suitability calculations. Programs are written so as to be transferrable to regional planning or regulatory agencies to assist in rational and comprehensive power plant site identification and analysis

  6. Supplementary Report on the Regulation of Site Selection and Preparation

    International Nuclear Information System (INIS)

    Webster, Philip

    2014-01-01

    The Committee on Nuclear Regulatory Activities (CNRA), based on the regulatory actions underway or being considered in different members countries concerning the design and construction of advanced nuclear power plants, established a working group responsible of the regulatory issues of siting, licensing and regulatory oversight of generation III+ and generation IV nuclear reactors. The Working Group on the Regulation of New Reactors (WGRNR) main purposes are to improve regulatory reviews by comparing practices in member countries; improve the licensing process of new reactors by learning from best practices in member countries; ensure that construction inspection issues and construction experience is shared; promote cooperation among member countries to improve safety; and enhance the effectiveness and efficiency of the regulatory process. The WGRNR has established a programme of work which includes: the collection of construction experience and the assessing of the information collected in order to share lessons learned and good practices; the review of regulatory practices concerning the regulation of nuclear sites selection and preparation; and the review of recent regulatory experience concerning the licensing structure of regulatory staff and regulatory licensing process. The WGRNR began in May 2008 a task of examining and documenting the various practices used by regulatory authorities in the regulation of nuclear power plant siting. The purpose of the task was to provide the member countries with practical information that would be helpful in assessing and potentially improving their regulatory practices and requirements on the regulation of sites. The task considered also regulatory practices on sites where a mixture of activities are taking place (e.g. operating units, new construction, and decommissioning, etc.). This work led to the publication in 2010 of the Report on the Survey on Regulation of Site Selection and Preparation NEA/CNRA/R(2010)3. This

  7. Radioactive waste disposal: Recommendations for a repository site selection

    International Nuclear Information System (INIS)

    Cadelli, N.; Orlowski, S.

    1992-01-01

    This report is a guidebook on recommendations for site selection of radioactive waste repository, based on a consensus in european community. This report describes particularly selection criteria and recommendations for radioactive waste disposal in underground or ground repositories. 14 refs

  8. Supramolecular Recognition Allows Remote, Site-Selective C-H Oxidation of Methylenic Sites in Linear Amines.

    Science.gov (United States)

    Olivo, Giorgio; Farinelli, Giulio; Barbieri, Alessia; Lanzalunga, Osvaldo; Di Stefano, Stefano; Costas, Miquel

    2017-12-18

    Site-selective C-H functionalization of aliphatic alkyl chains is a longstanding challenge in oxidation catalysis, given the comparable relative reactivity of the different methylenes. A supramolecular, bioinspired approach is described to address this challenge. A Mn complex able to catalyze C(sp 3 )-H hydroxylation with H 2 O 2 is equipped with 18-benzocrown-6 ether receptors that bind ammonium substrates via hydrogen bonding. Reversible pre-association of protonated primary aliphatic amines with the crown ether selectively exposes remote positions (C8 and C9) to the oxidizing unit, resulting in a site-selective oxidation. Remarkably, such control of selectivity retains its efficiency for a whole series of linear amines, overriding the intrinsic reactivity of C-H bonds, no matter the chain length. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Geochemical site-selection criteria for HLW repositories in Europe and North America

    International Nuclear Information System (INIS)

    Savage, David; Arthur, Randolph C.; Sasamoto, Hiroshi; Shibata, Masahiro; Yui, Mikazu

    2000-01-01

    Geochemical as well as socio-economic issues associated with the selection of potential sites to host a high-level nuclear waste repository have received considerable attention in repository programs in Europe (Belgium, Finland, France, Germany, Spain, Sweden, Switzerland and the U.K.) and North America (Canada and the United States). The objective of the present study is to summarize this international experience with particular emphasis on geochemical properties that factor into the adopted site-selection strategies. Results indicate that the geochemical properties of a site play a subordinate role, at best, to other geotechnical properties in the international site-selection approaches. In countries where geochemical properties are acknowledged in the site-selection approach, requirements are stated qualitatively and tend to focus on associated impacts on the stability of the engineered barrier system and on radionuclide transport. Site geochemical properties that are likely to control the long-term stability of geochemical conditions and radionuclide migration behavior are unspecified, however. This non-prescriptive approach may be reasonable for purposes of screening among potential sites, but a better understanding of site properties that are most important in controlling the long-term geochemical evolution of the site over a range of possible scenarios would enable the potential sites to be ranked in terms of their suitability to host a repository. (author)

  10. Field site selection: getting it right first time around

    NARCIS (Netherlands)

    Malcolm, Colin A.; El Sayed, Badria; Babiker, Ahmed; Girod, Romain; Fontenille, Didier; Knols, Bart G. J.; Nugud, Abdel Hameed; Benedict, Mark Q.

    2009-01-01

    The selection of suitable field sites for integrated control of Anopheles mosquitoes using the sterile insect technique (SIT) requires consideration of the full gamut of factors facing most proposed control strategies, but four criteria identify an ideal site: 1) a single malaria vector, 2) an

  11. Competing land use in the reserve site selection problem

    NARCIS (Netherlands)

    Langevelde, van F.; Schotman, A.; Claassen, G.D.H.; Sparenburg, G.A.

    2000-01-01

    The objective of this paper is to present an approach that addresses competing land uses in the reserve site selection problem. This approach is implemented in a spatial optimization model for conservation planning in human-dominated landscapes: MENTOR. This model allocates new sites as stepping

  12. Tunnel-Site Selection by Remote Sensing Techniques

    Science.gov (United States)

    A study of the role of remote sensing for geologic reconnaissance for tunnel-site selection was commenced. For this study, remote sensing was defined...conventional remote sensing . Future research directions are suggested, and the extension of remote sensing to include airborne passive microwave

  13. Periodical cicadas use light for oviposition site selection.

    Science.gov (United States)

    Yang, Louie H

    2006-12-07

    Organisms use incomplete information from local experience to assess the suitability of potential habitat sites over a wide range of spatial and temporal scales. Although ecologists have long recognized the importance of spatial scales in habitat selection, few studies have investigated the temporal scales of habitat selection. In particular, cues in the immediate environment may commonly provide indirect information about future habitat quality. In periodical cicadas (Magicicada spp.), oviposition site selection represents a very long-term habitat choice. Adult female cicadas insert eggs into tree branches during a few weeks in the summer of emergence, but their oviposition choices determine the underground habitats of root-feeding nymphs over the following 13 or 17 years. Here, field experiments are used to show that female cicadas use the local light environment of host trees during the summer of emergence to select long-term host trees. Light environments may also influence oviposition microsite selection within hosts, suggesting a potential behavioural mechanism for associating solar cues with host trees. In contrast, experimental nutrient enrichment of host trees did not influence cicada oviposition densities. These findings suggest that the light environments around host trees may provide a robust predictor of host tree quality in the near future. This habitat selection may influence the spatial distribution of several cicada-mediated ecological processes in eastern North American forests.

  14. The Beishan underground research laboratory for geological disposal of high-level radioactive waste in China: Planning, site selection, site characterization and in situ tests

    Directory of Open Access Journals (Sweden)

    Ju Wang

    2018-06-01

    Full Text Available With the rapid development of nuclear power in China, the disposal of high-level radioactive waste (HLW has become an important issue for nuclear safety and environmental protection. Deep geological disposal is internationally accepted as a feasible and safe way to dispose of HLW, and underground research laboratories (URLs play an important and multi-faceted role in the development of HLW repositories. This paper introduces the overall planning and the latest progress for China's URL. On the basis of the proposed strategy to build an area-specific URL in combination with a comprehensive evaluation of the site selection results obtained during the last 33 years, the Xinchang site in the Beishan area, located in Gansu Province of northwestern China, has been selected as the final site for China's first URL built in granite. In the process of characterizing the Xinchang URL site, a series of investigations, including borehole drilling, geological mapping, geophysical surveying, hydraulic testing and in situ stress measurements, has been conducted. The investigation results indicate that the geological, hydrogeological, engineering geological and geochemical conditions of the Xinchang site are very suitable for URL construction. Meanwhile, to validate and develop construction technologies for the Beishan URL, the Beishan exploration tunnel (BET, which is a 50-m-deep facility in the Jiujing sub-area, has been constructed and several in situ tests, such as drill-and-blast tests, characterization of the excavation damaged zone (EDZ, and long-term deformation monitoring of surrounding rocks, have been performed in the BET. The methodologies and technologies established in the BET will serve for URL construction. According to the achievements of the characterization of the URL site, a preliminary design of the URL with a maximum depth of 560 m is proposed and necessary in situ tests in the URL are planned. Keywords: Beishan, Xinchang site, Granite

  15. SAR Subsets for Selected Field Sites, 2007-2010

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: This data set provides Synthetic Aperture Radar (SAR) images for 42 selected sites from various terrestrial ecology and meteorological monitoring networks...

  16. SAR Subsets for Selected Field Sites, 2007-2010

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides Synthetic Aperture Radar (SAR) images for 42 selected sites from various terrestrial ecology and meteorological monitoring networks including...

  17. The teacher's role in selecting a methodological approach to the interpretation of a literary work

    Directory of Open Access Journals (Sweden)

    Stakić Mirjana M.

    2016-01-01

    Full Text Available The paper looks at the teacher's role in selecting a methodological approach to the interpretation of a literary work. The choice of methodological approach is dependent on: 1 the semiotic structure of the literary text; 2 the specific educational goals of interpretation; 3 the students' age, psychophysical abilities and knowledge, and 4 the planned circumstances of instruction. In selecting a method of interpretation, the teacher should take into consideration not only these factors, but also contemporary literary theory and its methodological apparatus. This can be a challenging task whose fulfillment does not guarantee that the interpretation will be successful, since the validity and functionality of the methodological approach cannot be established in theory but rather through teaching practice. It is up to the teacher to be creative, because a literary work cannot be interpreted by means of a single method but always through a combination of methods, certain of which have their origins in literary theory. There is a widespread belief among teachers that these methods, which have the status of technical/special methods in literary methodology, cannot be used in the first four grades of elementary school. This paper offers an example illustrating that the interpretive model can be used as early as first grade. A teacher's knowledge, as well as their creativity in selecting a method and their openness to creative methodological combinations and skill in applying them, directly affect the effectiveness of interpretation, either succeeding in developing a fondness for books and reading, or, failing that, resulting in a permanent loss of interest in the world of literature.

  18. The site selection process for a spent fuel repository in Finland. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    McEwen, T. [EnvirosQuantiSci (United Kingdom); Aeikaes, T. [Posiva Oy, Helsinki (Finland)

    2000-12-01

    This Summary Report describes the Finnish programme for the selection and characterisation of potential sites for the deep disposal of spent nuclear fuel and explains the process by which Olkiluoto has been selected as the single site proposed for the development of a spent fuel disposal facility. Its aim is to provide an overview of this process, initiated almost twenty years ago, which has entered its final phase. It provides information in three areas: a review of the early site selection criteria, a description of the site selection process, including all the associated site characterisation work, up to the point at which a single site was selected and an outline of the proposed work, in particular that proposed underground, to characterise further the Olkiluoto site. In 1983 the Finnish Government made a policy decision on the management of nuclear waste in which the main goals and milestones for the site selection programme for the deep disposal of spent fuel were presented. According to this decision several site candidates, whose selection was to be based on careful studies of the whole country, should be characterised and the site for the repository selected by the end of the year 2000. This report describes the process by which this policy decision has been achieved. The report begins with a discussion of the definition of the geological and environmental site selection criteria and how they were applied in order to select a small number of sites, five in all, that were to be the subject of the preliminary investigations. The methods used to investigate these sites and the results of these investigations are described, as is the evaluation of the results of these investigations and the process used to discard two of the sites and continue more detailed investigations at the remaining three. The detailed site investigations that commenced in 1993 are described with respect to the overall strategy followed and the investigation techniques applied. The

  19. Enabling Interoperable and Selective Data Sharing among Social Networking Sites

    Science.gov (United States)

    Shin, Dongwan; Lopes, Rodrigo

    With the widespread use of social networking (SN) sites and even introduction of a social component in non-social oriented services, there is a growing concern over user privacy in general, how to handle and share user profiles across SN sites in particular. Although there have been several proprietary or open source-based approaches to unifying the creation of third party applications, the availability and retrieval of user profile information are still limited to the site where the third party application is run, mostly devoid of the support for data interoperability. In this paper we propose an approach to enabling interopearable and selective data sharing among SN sites. To support selective data sharing, we discuss an authenticated dictionary (ADT)-based credential which enables a user to share only a subset of her information certified by external SN sites with applications running on an SN site. For interoperable data sharing, we propose an extension to the OpenSocial API so that it can provide an open source-based framework for allowing the ADT-based credential to be used seamlessly among different SN sites.

  20. Selection of radioactive waste disposal site considering natural processes

    International Nuclear Information System (INIS)

    Nakamura, H.

    1991-01-01

    To dispose the radioactive waste, it is necessary to consider the transfer of material in natural environment. The points of consideration are 1) Long residence time of water 2) Independence of biosphere from the compartment containing the disposal site in the natural hydrologic cycle 3) Dilution with the natural inactive isotope or the same group of elements. Isotope dilution for 129 I and 14 C can be expected by proper selection of the site. 241 Am and 239 Pu will be homogenized into soil or sediment with insoluble elements such as iron and aluminium. For 237 Np and 99 Tc anionic condition is important for the selection. From the point of view of hydrologic cycle, anoxic dead water zone avoiding beneath mountain area is preferable for the disposal site. (author)

  1. Artificial Intelligence Support for Landing Site Selection on Mars

    Science.gov (United States)

    Rongier, G.; Pankratius, V.

    2017-12-01

    Mars is a key target for planetary exploration; a better understanding of its evolution and habitability requires roving in situ. Landing site selection is becoming more challenging for scientists as new instruments generate higher data volumes. The involved engineering and scientific constraints make site selection and the anticipation of possible onsite actions into a complex optimization problem: there may be multiple acceptable solutions depending on various goals and assumptions. Solutions must also account for missing data, errors, and potential biases. To address these problems, we propose an AI-informed decision support system that allows scientists, mission designers, engineers, and committees to explore alternative site selection choices based on data. In particular, we demonstrate first results of an exploratory case study using fuzzy logic and a simulation of a rover's mobility map based on the fast marching algorithm. Our system computes favorability maps of the entire planet to facilitate landing site selection and allows a definition of different configurations for rovers, science target priorities, landing ellipses, and other constraints. For a rover similar to NASA's Mars 2020 rover, we present results in form of a site favorability map as well as four derived exploration scenarios that depend on different prioritized scientific targets, all visualizing inherent tradeoffs. Our method uses the NASA PDS Geosciences Node and the NASA/ICA Integrated Database of Planetary Features. Under common assumptions, the data products reveal Eastern Margaritifer Terra and Meridiani Planum to be the most favorable sites due to a high concentration of scientific targets and a flat, easily navigable surface. Our method also allows mission designers to investigate which constraints have the highest impact on the mission exploration potential and to change parameter ranges. Increasing the elevation limit for landing, for example, provides access to many additional

  2. Technical Assessment Of Selection Of A Waste Disposal Site

    International Nuclear Information System (INIS)

    Lee, Bong Hun

    1992-04-01

    This book gives overall descriptions of technical assessment of selection of a waste disposal site, which deals with standard of selection on incinerator of city waste, the method over assessment of selection of incinerator in city waste, prerequisite of technical assessment for selection of incinerator, waste incinerator and related equipment such as form, structure, quality of material, ventilation device, plumbing system and electrical installation, and total plan like plan of construction and a measure taken against environmental pollution.

  3. In vitro site selection of a consensus binding site for the Drosophila melanogaster Tbx20 homolog midline.

    Directory of Open Access Journals (Sweden)

    Nima Najand

    Full Text Available We employed in vitro site selection to identify a consensus binding sequence for the Drosophila melanogaster Tbx20 T-box transcription factor homolog Midline. We purified a bacterially expressed T-box DNA binding domain of Midline, and used it in four rounds of precipitation and polymerase-chain-reaction based amplification. We cloned and sequenced 54 random oligonucleotides selected by Midline. Electromobility shift-assays confirmed that 27 of these could bind the Midline T-box. Sequence alignment of these 27 clones suggests that Midline binds as a monomer to a consensus sequence that contains an AGGTGT core. Thus, the Midline consensus binding site we define in this study is similar to that defined for vertebrate Tbx20, but differs from a previously reported Midline binding sequence derived through site selection.

  4. Design methodology for the physical protection upgrade rule requirements for fixed sites. Technical report

    International Nuclear Information System (INIS)

    Evans, L.J. Jr.; Allen, T.

    1980-06-01

    This Design Methodology document aids the licensee in understanding how the fixed site requirements of the Physical Protection Upgrade Rule affect the design of physical protection systems for fuel processing plants, fuel manufacturing plants, or other fixed site special nuclear material operations involving possession or use of formula quantities of strategic special nuclear material. The document consists of three major elements: Logic Trees, Safeguards Jobs and Component Matrices, and Effectiveness Test Questionnaires. The work is based upon a previous study conducted by Sandia Laboratories for the Nuclear Regulatory Commission

  5. Territory and nest site selection patterns by Grasshopper Sparrows in southeastern Arizona

    Science.gov (United States)

    Ruth, Janet M.; Skagen, Susan K.

    2017-01-01

    Grassland bird populations are showing some of the greatest rates of decline of any North American birds, prompting measures to protect and improve important habitat. We assessed how vegetation structure and composition, habitat features often targeted for management, affected territory and nest site selection by Grasshopper Sparrows (Ammodramus savannarum ammolegus) in southeastern Arizona. To identify features important to males establishing territories, we compared vegetation characteristics of known territories and random samples on 2 sites over 5 years. We examined habitat selection patterns of females by comparing characteristics of nest sites with territories over 3 years. Males selected territories in areas of sparser vegetation structure and more tall shrubs (>2 m) than random plots on the site with low shrub densities. Males did not select territories based on the proportion of exotic grasses. Females generally located nest sites in areas with lower small shrub (1–2 m tall) densities than territories overall when possible and preferentially selected native grasses for nest construction. Whether habitat selection was apparent depended upon the range of vegetation structure that was available. We identified an upper threshold above which grass structure seemed to be too high and dense for Grasshopper Sparrows. Our results suggest that some management that reduces vegetative structure may benefit this species in desert grasslands at the nest and territory scale. However, we did not assess initial male habitat selection at a broader landscape scale where their selection patterns may be different and could be influenced by vegetation density and structure outside the range of values sampled in this study.

  6. Growing risk avoidance in Asian oncology site selection: how trends in site selection are limiting growth of the Asia cancer trial landscape

    Directory of Open Access Journals (Sweden)

    Horsburgh D

    2013-12-01

    Full Text Available David Horsburgh,1 Yi-Chen Josey Lee,2 Elvira Zenaida Lansang,1 Ken J Lee,3 Malcolm Ogg,4 Karen Wai1 1Feasibility and Site Identification Asia, Quintiles East Asia Pte Ltd, Singapore; 2Feasibility and Site Identification Asia, Quintiles East Asia Pte Ltd, Taipei, Taiwan; 3Site Services Asia, Quintiles East Asia Pte Ltd, Singapore; 4Global Integrated Site Services, Quintiles, Green Park, Reading, Berkshire, United Kingdom Background: Asia-Pacific represents the fastest-growing region for clinical trials, with growth in oncology studies being a strong contributor. Such demand has seen a rapid change in Asia's total site pool and the number of experienced and inexperienced, or naïve, sites being activated. Given the perceived risks involved with naïve sites, this study aims to investigate changes in the rate of naïve site selection and how this risk management may influence future growth within the region. Methods: Rates of total naïve and experienced sites initiated per year, per protocol, and the relative contribution of each to the yearly site total were analyzed. Data was collected from Quintiles internal metrics as well as from the publicly available ClinicalTrials.gov database and was filtered to include oncology studies involving at least one Asian country, between the years 2000 and 2012. Results and discussion: Despite a general increase in the number of sites activated overall, the contribution of naïve sites to the yearly total fell to 20% in 2012. Experienced sites were heavily favored, with reliance on the existing site network preferred to expansion through naïve sites. This is likely a result of the perceived challenges with using inexperienced sites and the industry desire to avoid this risk. However, fluctuations in naïve sites activation suggest that the limited level of growth in the site pool may not be enough to sustain demand, with sudden outreaches to naïve sites necessary as current site pool capacity is occasionally

  7. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Berglund, Johan [SwedPower AB, Stockholm (Sweden); Follin, Sven [SF Geologic AB, Stockholm (Sweden); Hakami, Eva [Itasca Geomekanik AB, Stockholm (Sweden); Halvarson, Jan [Swedish Nuclear Fuel and Waste Management Co, Stockholm (Sweden); Hermanson, Jan [Golder Associates AB, Stockholm (Sweden); Laaksoharju, Marcus [Geopoint (Sweden); Rhen, Ingvar [Sweco VBB/VIAK, Stockholm (Sweden); Wahlgren, C.H. [Sveriges Geologiska Undersoekning, Uppsala (Sweden)

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline

  8. Approaches to LLW disposal site selection and current progress of host states

    International Nuclear Information System (INIS)

    Walsh, J.J.; Kerr, T.A.

    1990-11-01

    In accordance with the Low-Level Radioactive Waste Policy Amendments Act of 1985 and under the guidance of 10 CFR 61, States have begun entering into compacts to establish and operate regional disposal facilities for low-level radioactive waste. The progress a state makes in implementing a process to identify a specific location for a disposal site is one indication of the level of a state's commitment to meeting its responsibilities under Federal law and interstate compact agreements. During the past few years, several States have been engaged in site selection processes. The purpose of this report is to summarize the site selection approaches of some of the Host States (California, Michigan, Nebraska, New York, North Carolina, Texas, and Illinois), and their progress to date. An additional purpose of the report is to discern whether the Host States's site selection processes were heavily influenced by any common factors. One factor each state held in common was that political and public processes exerted a powerful influence on the site selection process at virtually every stage. 1 ref

  9. 24 CFR 983.57 - Site selection standards.

    Science.gov (United States)

    2010-04-01

    ...; (vi) If the poverty rate in the area where the proposed PBV development will be located is greater... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Site selection standards. 983.57 Section 983.57 Housing and Urban Development Regulations Relating to Housing and Urban Development...

  10. Site selection and general layout of heap leaching uranium mill

    International Nuclear Information System (INIS)

    Zhang Chunmao; Rongfeng

    2011-01-01

    The site selection and general layout of uranium mill is an important work in the design and consultation stage of uranium mining and metallurgy's engineering construction. Based on the design practices, the principles and methods for the site selection and general layout of heap leaching uranium mill are analyzed and studied. Some problems which should be paid much attention to in the design are discussed in hopes of providing a useful reference for the design and consultation of similar projects. (authors)

  11. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    International Nuclear Information System (INIS)

    Andersson, Johan; Berglund, Johan; Follin, Sven; Hakami, Eva; Halvarson, Jan; Hermanson, Jan; Laaksoharju, Marcus; Rhen, Ingvar; Wahlgren, C.H.

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline and after this

  12. Bayes Empirical Bayes Inference of Amino Acid Sites Under Positive Selection

    DEFF Research Database (Denmark)

    Yang, Ziheng; Wong, Wendy Shuk Wan; Nielsen, Rasmus

    2005-01-01

    , with > 1 indicating positive selection. Statistical distributions are used to model the variation in among sites, allowing a subset of sites to have > 1 while the rest of the sequence may be under purifying selection with ... probabilities that a site comes from the site class with > 1. Current implementations, however, use the naive EB (NEB) approach and fail to account for sampling errors in maximum likelihood estimates of model parameters, such as the proportions and ratios for the site classes. In small data sets lacking...... information, this approach may lead to unreliable posterior probability calculations. In this paper, we develop a Bayes empirical Bayes (BEB) approach to the problem, which assigns a prior to the model parameters and integrates over their uncertainties. We compare the new and old methods on real and simulated...

  13. Survey and selection of assessment methodologies for GAVE options

    International Nuclear Information System (INIS)

    Weterings, R.

    1999-05-01

    The Dutch government is interested in the possibilities for a market introduction of new gaseous and liquid energy carriers. To this purpose the GAVE-programme was recently set up. This study is carried out within the framework of the GAVE-programme and aims at the selection of methodologies for assessing the technological, economic, ecological and social perspectives of these new energy options (so-called GAVE-options). Based on the results of these assessments the Dutch ministries of Housing, Planning and Environment (VROM) and Economic Affairs (EZ) will decide at the end of 1999 about starting demonstration projects of promising energy carriers

  14. Structuring a cost-effective site characterization

    International Nuclear Information System (INIS)

    Berven, B.A.; Little, C.A.; Swaja, R.E.

    1990-01-01

    Successful chemical and radiological site characterizations are complex activities which require meticulously detailed planning. Each layer of investigation is based upon previously generated information about the site. Baseline historical, physical, geological, and regulatory information is prerequisite for preliminary studies at a site. Preliminary studies then provide samples and measurements which define the identity of potential contaminants and define boundaries around the area to be investigated. The goal of a full site characterization is to accurately determine the extent and magnitude of contaminants and carefully define the site conditions such that the future movements of site contaminants can be assessed for potential exposure to human occupants and/or environmental impacts. Critical to this process is the selection of appropriate measurement and sampling methodology, selection and use of appropriate instrumentation and management/interpretation of site information. Site investigations require optimization between the need of information to maximize the understanding of site conditions and the cost of acquiring that information. 5 refs., 1 tab

  15. Methodological guidelines for geoheritage site assessment: A proposal for Serbia

    Directory of Open Access Journals (Sweden)

    Maran-Stevanović Aleksandra

    2015-01-01

    Full Text Available Various minerals, rocks, soil types, ore and fossiliferous deposits, structural and tectonic elements, surface and subterranean landforms, all those natural phenomena representing geodiversity in a small scale contribute to our understanding the significant events and episodes of the geological history of the Earth. Intended methodology for qualitative and quantitative assessment is presented, including valuing criteria and their numerical indicators, which serve as analytical instruments to identify and select potential geoheritage objects in Serbia. Objective assessing and categorizing the geoheritage objects are the starting points for their rational utilization, adequate conservation, proper interpretation and promotion.

  16. Methodological proposal for evaluating and selecting environment al indicators, Case: Chachafruto Stream Basin, Rionegro, Antioquia, Colombia

    International Nuclear Information System (INIS)

    Osorio Velez, Luis Fernando; Pineda Correa, Marcelena

    2000-01-01

    The investigation mainly responds to the necessity of developing a methodology that allows getting indicators to make easier the process of making decisions in the environmental administration field. The elaboration was relied on the support of the Corporacion Autonoma Regional Rionegro - Nare CORNARE in Antioquia - Colombia, through a subscribed agreement between this entity and the authors. The development of the investigation was carried out in two parts: the first involves the search of methodological paths for the evaluation and selection of applicable indicators to basins, Through the creation of parameters that allow qualifying these indicators in direct form; this is followed by a statistical treatment that allows selecting indicators in a rational way. For application purposes, some criterions are defined in a such way that the selected indicators can be evaluated; with these criterions the matrix is constructed; this allows to view and qualify the indicators, starting from ranges and scales previously defined; once the evaluation and qualification matrix are carried out, the selection process is begun from multivariate analysis. The second part consists in the methodology application expounded to a pattern of indicators previously defined and a determined territory (Basin of the Chachafruto Stream, Rionegro - Antioquia - Colombia); starting from the listing of the whole reported indicators in the consulted literature, the ability of themselves to reflex the basin problems is analyzed, based on parameters such as local contextualization and focuses of the topic. Once the first selection is done, the indicators are submitted to the qualification and evaluation matrix and its results are analyzed by multivariate analysis, in order to condense the environmental indicators to be used. Subsequently, for the evaluation of selected indicators, it is necessary to compile diverse thematic information and to identify the existent databases for the select territory

  17. Automated remedial assessment methodology software system

    International Nuclear Information System (INIS)

    Whiting, M.; Wilkins, M.; Stiles, D.

    1994-11-01

    The Automated Remedial Analysis Methodology (ARAM) software system has been developed by the Pacific Northwest Laboratory to assist the U.S. Department of Energy (DOE) in evaluating cleanup options for over 10,000 contaminated sites across the DOE complex. The automated methodology comprises modules for decision logic diagrams, technology applicability and effectiveness rules, mass balance equations, cost and labor estimating factors and equations, and contaminant stream routing. ARAM is used to select technologies for meeting cleanup targets; determine the effectiveness of the technologies in destroying, removing, or immobilizing contaminants; decide the nature and amount of secondary waste requiring further treatment; and estimate the cost and labor involved when applying technologies

  18. A Selection Methodology for the RTOS Market

    Science.gov (United States)

    Melanson, P.; Tafazoli, S.

    In past years, the market of Operating Systems (OS) has been quite active. One of those key markets is to support embedded real-time applications in which the OS must guarantee the timeliness as well as the correctness of the processing. Many OS claim to be Real-Time Operating Systems (RTOS), but often, it is only by reviewing the OS specifications or detailed information that one can truly identify the OS that enables real- time applications. Designers are faced with and impressive task when selecting an RTOS for their space mission. Whether for historical reasons or due to the rapid evolution of the RTOS market, it appears that RTOS are not evaluated for each mission but rather imposed. Although reasons for imposing this choice can be well justified, other times one is left to wonder if the lack of evaluation to mission requirements can lead to increased risks down the road. How does one select the proper RTOS for space missions, which will a) meet the requirements, b) correspond with the knowledge and expertise of the staff and c) continue to be a strategic choice for the future? The purpose of this paper is to compare commercially available RTOS that are suitable for space missions requiring hard real-time capabilities. It is our belief that this research identifies the important products for space missions and presents a methodology to select the appropriate RTOS that will meet design requirements and other relevant criteria. Lastly, the paper will present the volatility of the market in the past two years and determine the implications for embedded systems used in space missions. 1

  19. Nucleation of recrystallization at selected sites in deformed fcc metals

    DEFF Research Database (Denmark)

    Xu, Chaoling

    The objective of this thesis is to explore nucleation of recrystallization at selected sites in selected face-centered-cubic (FCC) metals, namely cold rolled columnar-grained nickel and high purity aluminum further deformed by indenting. Various techniques, including, optical microscopy, electron...... backscattered diffraction (EBSD), electron channeling contrast (ECC) and synchrotron X-ray technique, differential-aperture X-ray microscopy (DAXM), were used to characterize the microstructures, to explore nucleation sites, orientation relationships between nuclei and deformed microstructures, and nucleation...... mechanisms. In the cold rolled nickel samples, the preference of triple junctions (TJs) and grain boundaries (GBs) as nucleation sites is observed. The majorities of the nuclei have the same orientations as the surrounding matrix or are twin-related to a surrounding deformed grain. Only a few nuclei...

  20. Analytic hierarchy process helps select site for limestone quarry expansion in Barbados.

    Science.gov (United States)

    Dey, Prasanta Kumar; Ramcharan, Eugene K

    2008-09-01

    Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-economic-environmental factors. Adequate consideration of all the factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, technical and socio-economic-environmental factors were then identified. Third, a database was developed for each site with respect to each factor. Fourth, a hierarchical model in analytic hierarchy process (AHP) framework was then developed. Fifth, the relative ranking of the alternate sites was then derived through pair wise comparison in all the levels and through subsequent synthesizing of the results across the hierarchy through computer software (Expert Choice). The study reveals that an integrated framework using the AHP can help select a site for the quarry expansion project in Barbados.

  1. Methodology for oversizing marginal quality riprap for erosion control at uranium mill tailings sites

    International Nuclear Information System (INIS)

    Staub, W.P.; Abt, S.R.

    1987-01-01

    Properly selected and oversized local sources of riprap may provide superior erosion protection compared with revegetation at a number of uranium mill tailings sites in arid regions of the United States. Whereas highly durable rock is appropriate for protecting diversion channels to the height of the 5-year flood, marginal quality rock may be adequate for protecting infrequently flooded side slopes of diversion channels, tailings embankments and caps. Marginal quality rock may require oversizing to guarantee that design size specifications are met at the end of the performance period (200 to 1000 years). This paper discusses a methodology for oversizing marginal quality rock. Results of cyclic freezing and thawing tests are used to determine oversizing requirements as functions of the performance period and environment. Test results show that marginal quality rock may be used in frequently saturated areas but in some cases oversizing will be substantial and in other cases marginal quality rock may be disqualified. Oversizing of marginal quality rock appears to be a practical reality in occasionally saturated areas (between the 5-year and 100-year floods). Furthermore, oversizing will not generally be required on slopes from the 100-year flood. 6 refs., 4 tabs

  2. Application of methodological approach to selection of sportswomen to calisthenics teams for group exercises, considering compatibility factor

    Directory of Open Access Journals (Sweden)

    O.S. Kozhanova

    2015-04-01

    Full Text Available Purpose: motivation of methodological approach to selection of sportswomen to calisthenics teams for group exercises considering compatibility factor. Material: in the research 40 high qualification sportswomen of 17-23 yrs age with sport experience of 11-16 years participated. With cluster analysis 10 gymnasts with morphological indicators, meeting modern standards of group exercises were selected. Results: we found 5 generalized factors, which characterize structure of selection to teams and determines 72% of dispersion. Influence of kinds and connected with them criteria of compatibility on efficiency of gymnasts’ competition functioning were also determined. The authors substantiated methodological approach to selection of sportswomen to calisthenics teams for group exercises, considering compatibility factor. Conclusions: in selection to calisthenics teams for group exercises it is purposeful to realize complex registration of compatibility kinds, considering gymnasts’ similar features by recommended indicators.

  3. Geotechnical conditions of Bulgaria and site selection for radioactive waste repository

    International Nuclear Information System (INIS)

    Iliev, I.; Tacheva, E.

    1993-01-01

    A comparative study of the complex structure of the Bulgarian lands and the engineering geological criteria for site selection of national repositories for high level radwastes is made. A detailed description of the following geotechnical conditions of Bulgaria's territory is given: genetic, lithological and engineering-geological types of rocks; physico-mechanical parameters of the most widespread rocky and semi-rocky engineering geological types; fissuring of the rocks; rock massifs; geodynamic processes. The number of promising variants for repositories have been classified according to the structure of the rock massif and the engineering-geological properties of the layers which are promising for the purpose. The following sites are investigated: 1) sites in one-type homogeneous rock massifs of high strength and elasticity; 2) sites of various type massifs with a promising layer of rocks with medium strength and elasticity; 3) sites in various type massifs with a promising layer of plastic rocks of low strength. It is concluded that the complexity of the geotechnical and other conditions in the territory of Bulgaria would predetermine the deficiency of the list of the properties required for the selected sites. The building up of engineering defence will be needed to offset that deficiency and their problems will be resolved after the specific site have been chosen. Geotechnical elements should be likewise envisaged within the general pattern of the monitoring needed. The designing, installing and putting into operation of the monitoring systems should be accomplished as early as the stage of the detailed investigation of the site selected. 19 refs., 2 suppls. (author)

  4. D Integrated Methodologies for the Documentation and the Virtual Reconstruction of AN Archaeological Site

    Science.gov (United States)

    Balletti, C.; Guerra, F.; Scocca, V.; Gottardi, C.

    2015-02-01

    Highly accurate documentation and 3D reconstructions are fundamental for analyses and further interpretations in archaeology. In the last years the integrated digital survey (ground-based survey methods and UAV photogrammetry) has confirmed its main role in the documentation and comprehension of excavation contexts, thanks to instrumental and methodological development concerning the on site data acquisition. The specific aim of the project, reported in this paper and realized by the Laboratory of Photogrammetry of the IUAV University of Venice, is to check different acquisition systems and their effectiveness test, considering each methodology individually or integrated. This research focuses on the awareness that the integration of different survey's methodologies can as a matter of fact increase the representative efficacy of the final representations; these are based on a wider and verified set of georeferenced metric data. Particularly the methods' integration allows reducing or neutralizing issues related to composite and complex objects' survey, since the most appropriate tools and techniques can be chosen considering the characteristics of each part of an archaeological site (i.e. urban structures, architectural monuments, small findings). This paper describes the experience in several sites of the municipality of Sepino (Molise, Italy), where the 3d digital acquisition of cities and structure of monuments, sometimes hard to reach, was realized using active and passive techniques (rage-based and image based methods). This acquisition was planned in order to obtain not only the basic support for interpretation analysis, but also to achieve models of the actual state of conservation of the site on which some reconstructive hypotheses can be based on. Laser scanning data were merged with Structure from Motion techniques' clouds into the same reference system, given by a topographical and GPS survey. These 3d models are not only the final results of the metric

  5. Site-controlled fabrication of silicon nanotips by indentation-induced selective etching

    Science.gov (United States)

    Jin, Chenning; Yu, Bingjun; Liu, Xiaoxiao; Xiao, Chen; Wang, Hongbo; Jiang, Shulan; Wu, Jiang; Liu, Huiyun; Qian, Linmao

    2017-12-01

    In the present study, the indentation-induced selective etching approach is proposed to fabricate site-controlled pyramidal nanotips on Si(100) surface. Without any masks, the site-controlled nanofabrication can be realized by nanoindentation and post etching in potassium hydroxide (KOH) solution. The effect of indentation force and etching time on the formation of pyramidal nanotips was investigated. It is found that the height and radius of the pyramidal nanotips increase with the indentation force or etching time, while long-time etching can lead to the collapse of the tips. The formation of pyramidal tips is ascribed to the anisotropic etching of silicon and etching stop of (111) crystal planes in KOH aqueous solution. The capability of this fabrication method was further demonstrated by producing various tip arrays on silicon surface by selective etching of the site-controlled indent patterns, and the maximum height difference of these tips is less than 10 nm. The indentation-induced selective etching provides a new strategy to fabricate well site-controlled tip arrays for multi-probe SPM system, Si nanostructure-based sensors and high-quality information storage.

  6. Site selection for Canada's national repository for used nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ben Belfadhel, M.; Watts, B.; Facella, J., E-mail: mbenbelfadhel@nwmo.ca [Nuclear Waste Management Organization (NWMO), Toronto, Ontario (Canada)

    2015-12-15

    In 2007, the Government of Canada selected Adaptive Phased Management as Canada's plan for the long-term management of Canada's used nuclear fuel. The approach provides for containment and isolation of the material in a deep geological repository at a safe site with an informed and willing host. The Nuclear Waste Management Organization is tasked through federal legislation with selecting the site and developing and managing all aspects of the plan. In May 2010, the organization published and initiated the site selection process that serves as a road map for decision making on the location for the deep geological repository. It continues to lead the site selection process for the repository and an associated Centre of Expertise. The screening process is advancing and, from an initial starting point of 22 communities expressing interest in learning about the project; as of September 2015, 9 communities are the focus of more detailed technical and community well-being studies. Preliminary Assessments, the third step in the 9-step site selection process are underway in these communities. The Assessments involve preliminary technical and social desktop and field assessments, engagement activities within and beyond each interested community, and involvement of Indigenous peoples and nearby municipalities in the planning and conduct of the work. This paper provides an update on the advancement of the site selection process. It describes the nature of the technical and social studies being conducted at this phase of work, including the progressively more detailed field studies that are the focus of technical work at the current stage, the approach to engagement and collaboration with communities to direct these studies, and the work underway to ensure the framework used for this assessment and engagement includes the range of priorities and perspectives of First Nations and Metis peoples and communities in the broader area. (author)

  7. Chemical tailoring of teicoplanin with site-selective reactions.

    Science.gov (United States)

    Pathak, Tejas P; Miller, Scott J

    2013-06-05

    Semisynthesis of natural product derivatives combines the power of fermentation with orthogonal chemical reactions. Yet, chemical modification of complex structures represents an unmet challenge, as poor selectivity often undermines efficiency. The complex antibiotic teicoplanin eradicates bacterial infections. However, as resistance emerges, the demand for improved analogues grows. We have discovered chemical reactions that achieve site-selective alteration of teicoplanin. Utilizing peptide-based additives that alter reaction selectivities, certain bromo-teicoplanins are accessible. These new compounds are also scaffolds for selective cross-coupling reactions, enabling further molecular diversification. These studies enable two-step access to glycopeptide analogues not available through either biosynthesis or rapid total chemical synthesis alone. The new compounds exhibit a spectrum of activities, revealing that selective chemical alteration of teicoplanin may lead to analogues with attenuated or enhanced antibacterial properties, in particular against vancomycin- and teicoplanin-resistant strains.

  8. Riel Converter Station, Winnipeg: Site selection and environmental assessment status report

    International Nuclear Information System (INIS)

    1991-01-01

    As part of its expansion plans, Manitoba Hydro is planning to construct a converter station east of Winnipeg to receive power from a 850-km dc transmission line which will be constructed to bring power from a new generating station in the north of the province. Work performed to date on site selection and preliminary environmental assessment of the converter station is reviewed. The role of the converter station is described and the potential impacts are summarized in such areas as employment opportunities, pollution and noise during construction, electric and magnetic field effects, and land use impacts. Site selection criteria are outlined and potential sites are identified and evaluated. The Deacon site has been chosen as the preferred site since it has a number of inherent advantages including existing ownership by Manitoba Hydro, proximity to existing transmission rights-of-way, and low visual and land-use impact. 12 figs

  9. Automating an integrated spatial data-mining model for landfill site selection

    Science.gov (United States)

    Abujayyab, Sohaib K. M.; Ahamad, Mohd Sanusi S.; Yahya, Ahmad Shukri; Ahmad, Siti Zubaidah; Aziz, Hamidi Abdul

    2017-10-01

    An integrated programming environment represents a robust approach to building a valid model for landfill site selection. One of the main challenges in the integrated model is the complicated processing and modelling due to the programming stages and several limitations. An automation process helps avoid the limitations and improve the interoperability between integrated programming environments. This work targets the automation of a spatial data-mining model for landfill site selection by integrating between spatial programming environment (Python-ArcGIS) and non-spatial environment (MATLAB). The model was constructed using neural networks and is divided into nine stages distributed between Matlab and Python-ArcGIS. A case study was taken from the north part of Peninsular Malaysia. 22 criteria were selected to utilise as input data and to build the training and testing datasets. The outcomes show a high-performance accuracy percentage of 98.2% in the testing dataset using 10-fold cross validation. The automated spatial data mining model provides a solid platform for decision makers to performing landfill site selection and planning operations on a regional scale.

  10. Stratigraphic Profiles for Selected Hanford Site Seismometer Stations and Other Locations

    Energy Technology Data Exchange (ETDEWEB)

    Last, George V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-02-01

    Stratigraphic profiles were constructed for eight selected Hanford Site seismometer stations, five Hanford Site facility reference locations, and seven regional three-component broadband seismometer stations. These profiles provide interpretations of the subsurface layers to support estimation of ground motions from past earthquakes, and the prediction of ground motions from future earthquakes. In most cases these profiles terminated at the top of the Wanapum Basalt, but at selected sites profiles were extended down to the top of the crystalline basement. The composite one-dimensional stratigraphic profiles were based primarily on previous interpretations from nearby boreholes, and in many cases the nearest deep borehole is located kilometers away.

  11. Methodological guide. Management of sites potentially polluted by radioactive substances

    International Nuclear Information System (INIS)

    2010-01-01

    Within the frame of an approach for the management and rehabilitation of polluted sites, this updated version of a previous report proposes a set of methodological tools. It presents the main components of the general approach while distinguishing the interpretation of the environment status and a management plan. In both cases, a conceptual scheme is designed on the base of a diagnosis. In the first case, the interpretation aims at examining the compatibility between the pollution level and the observed uses. For the management plan, uses can be chosen: this is the case for industrial land reconversion. Therefore, this guide addresses the different issues and aspects of the diagnosis, interpretation of the environment status, and management plan. A last part deals with involvement of the different actors

  12. Equilibrium Strategy Based Recycling Facility Site Selection towards Mitigating Coal Gangue Contamination

    Directory of Open Access Journals (Sweden)

    Jiuping Xu

    2017-02-01

    Full Text Available Environmental pollution caused by coal gangue has been a significant challenge for sustainable development; thus, many coal gangue reduction approaches have been proposed in recent years. In particular, coal gangue facility (CGF construction has been considered as an efficient method for the control and recycling of coal gangue. Meanwhile, the identification and selection of suitable CGF sites is a fundamental task for the government. Therefore, based on the equilibrium strategy, a site selection approach under a fuzzy environment is developed to mitigate coal gangue contamination, which integrates a geographical information system (GIS technique and a bi-level model to identify candidate CGF sites and to select the most suitable one. In this situation, the GIS technique used to identify potential feasible sites is able to integrate a great deal of geographical data tofitwithpracticalcircumstances;thebi-levelmodelusedtoscreentheappropriatesitecanreasonably dealwiththeconflictsbetweenthelocalauthorityandthecolliery. Moreover,aKarush–Kuhn–Tucker (KKT condition-based approach is used to find an optimal solution, and a case study is given to demonstrate the effectiveness of the proposed method. The results across different scenarios show that appropriate site selection can achieve coal gangue reduction targets and that a suitable excess stack level can realize an environmental-economic equilibrium. Finally, some propositions and management recommendations are given.

  13. HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2011-06-01

    Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

  14. HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2011-01-01

    Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

  15. Resource evaluation and site selection for microalgae production systems

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, E.L.; Folger, A.G.; Hogg, S.E.

    1985-05-01

    Climate, land, and water resource requirements of microalgae production systems (MPS) were examined relative to construction costs, operating costs, and biomass productivity. The objective was the stratification of the southwestern United States into zones of relative suitability for MPS. Maps of climate (insolation, freeze-free period, precipitation, evaporation, thunderstorm days), land (use/cover, ownership, slope), and water (saline groundwater) resource parameters were obtained. These maps were transformed into digital overlays permitting the cell-by-cell compositing of selected resource parameters to form maps representing relative productivity, make-up water, climate suitability, land suitability, water suitability, and overall suitability. The Southwest was selected for this study because of its high levels of insolation, saline water resources, and large areas of relatively low valued land. The stratification maps cannot be used for the selection of specific sites because of their low resolution (12,455-acre cells). They can be used to guide future resource studies and site selection efforts, however, by limiting these efforts to the most suitable regions. Future efforts should concentrate on saline water resources, for which only limited data are currently available. 13 refs., 44 figs., 5 tabs.

  16. The utility of Geographical Information Systems (GIS) in systems-oriented obesity intervention projects: the selection of comparable study sites for a quasi-experimental intervention design--TX CORD.

    Science.gov (United States)

    Oluyomi, Abiodun O; Byars, Allison; Byrd-Williams, Courtney; Sharma, Shreela V; Durand, Casey; Hoelscher, Deanna M; Butte, Nancy F; Kelder, Steven H

    2015-02-01

    The Texas Childhood Obesity Research Demonstration project (TX CORD) uses a systems-oriented approach to address obesity that includes individual and family interventions, community-level action, as well as environmental and policy initiatives. Given that randomization is seldom possible in community-level intervention studies, TX CORD uses a quasi-experimental design. Comparable intervention and comparison study sites are needed to address internal validity bias. TX CORD was designed to be implemented in low-income, ethnically diverse communities in Austin and Houston, Texas. A three-stage Geographical Information System (GIS) methodology was used to establish and ascertain the comparability of the intervention and comparison study sites. Census tract (stage 1) and school (stage 2) data were used to identify spatially exclusive geographic areas that were comparable. In stage 3, study sites were compared on demographic characteristics, socioeconomic status (SES), food assets, and physical activity (PA) assets. Student's t-test was used to examine significant differences between the selected sites. The methodology that was used resulted in the selection of catchment areas with demographic and socioeconomic characteristics that fit the target population: ethnically diverse population; lower-median household income; and lower home ownership rates. Additionally, the intervention and comparison sites were statistically comparable on demographic and SES variables, as well as food assets and PA assets. This GIS approach can provide researchers, program evaluators, and policy makers with useful tools for both research and practice. Area-level information that allows for robust understanding of communities can enhance analytical procedures in community health research and offer significant contributions in terms of community assessment and engagement.

  17. Microclimate and nest-site selection in Micronesian Kingfishers

    Science.gov (United States)

    Kesler, Dylan C.; Haig, Susan M.

    2005-01-01

    We studied the relationship between microclimate and nest-site selection in the Pohnpei Micronesian Kingfisher (Todiramphus cinnamominus reichenbachii) which excavates nest cavities from the mudlike nest structures of arboreal termites (Nasutitermes sp.) or termitaria. Mean daily high temperatures at termitaria were cooler and daily low temperatures were warmer than at random sites in the forest. Results also indicate that termitaria provided insulation from temperature extremes, and that temperatures inside termitaria were within the thermoneutral zone of Micronesian Kingfishers more often than those outside. No differences were identified in temperatures at sites where nest termitaria and nonnest termitaria occurred or among the insulation properties of used and unused termitaria. These results suggest that although termitaria provide insulation from thermal extremes and a metabolically less stressful microclimate, king-fishers did not select from among available termitaria based on their thermal properties. Our findings are relevant to conservation efforts for the critically endangered Guam Micronesian Kingfisher (T. c. cinnamominus) which is extinct in the wild and exists only as a captive population. Captive breeding facilities should provide aviaries with daily ambient temperatures ranging from 22.06 A?C to 28.05 A?C to reduce microclimate-associated metabolic stress and to replicate microclimates used by wild Micronesian Kingfishers.

  18. The genealogy of sequences containing multiple sites subject to strong selection in a subdivided population.

    Science.gov (United States)

    Nordborg, Magnus; Innan, Hideki

    2003-03-01

    A stochastic model for the genealogy of a sample of recombining sequences containing one or more sites subject to selection in a subdivided population is described. Selection is incorporated by dividing the population into allelic classes and then conditioning on the past sizes of these classes. The past allele frequencies at the selected sites are thus treated as parameters rather than as random variables. The purpose of the model is not to investigate the dynamics of selection, but to investigate effects of linkage to the selected sites on the genealogy of the surrounding chromosomal region. This approach is useful for modeling strong selection, when it is natural to parameterize the past allele frequencies at the selected sites. Several models of strong balancing selection are used as examples, and the effects on the pattern of neutral polymorphism in the chromosomal region are discussed. We focus in particular on the statistical power to detect balancing selection when it is present.

  19. Proceedings of the tenth annual DOE low-level waste management conference: Session 2: Site performance assessment

    International Nuclear Information System (INIS)

    1988-12-01

    This document contains twelve papers on various aspects of low-level radioactive waste management. Topics of this volume include: performance assessment methodology; remedial action alternatives; site selection and site characterization procedures; intruder scenarios; sensitivity analysis procedures; mathematical models for mixed waste environmental transport; and risk assessment methodology. Individual papers were processed separately for the database

  20. Using boolean and fuzzy logic combined with analytic hierarchy process for hazardous waste landfill site selection: A case study from Hormozgan province, Iran

    Directory of Open Access Journals (Sweden)

    Mahdieh Saadat Foomani

    2017-01-01

    Full Text Available Hazardous wastes include numerous kinds of discarded chemicals and other wastes generated from industrial, commercial, and institutional activities. These types of waste present immediate or long-term risks to humans, animals, plants, or the environment and therefore require special handling for safe disposal. Landfills that can accept hazardous wastes are excavated or engineered sites where these special types of waste can be disposed of securely. Since landfills are permanent sites, special attention must be afforded in selecting the location. This paper investigated the use of the Boolean theory and Fuzzy logic in combination with Analytic Hierarchy Process (AHP methods by applying GIS and IDRISI software for the selection of a hazardous waste landfill site in the Iranian province of Hormozgan. The best location was determined via the Fuzzy and the Boolean methodologies. By collating the area selected for the hazardous waste landfill, this study found that Fuzzy logic with an AND operator had the best options for this purpose. In the end, the most suitable area for a hazardous waste landfill was about 1.6 km2 which was obtained by employing Fuzzy in combination with AHP and by using an AND operator. In addition, all the fundamental criteria affecting the landfill location were considered.

  1. High-level radioactive waste repositories site selection plan

    International Nuclear Information System (INIS)

    Castanon, A.; Recreo, F.

    1985-01-01

    A general vision of the high level nuclear waste (HLNW) and/or nuclear spent fuel facilities site selection processes is given, according to the main international nuclear safety regulatory organisms quidelines and the experience from those countries which have reached a larger development of their national nuclear programs. (author)

  2. The Application of Computer-Aided Discovery to Spacecraft Site Selection

    Science.gov (United States)

    Pankratius, V.; Blair, D. M.; Gowanlock, M.; Herring, T.

    2015-12-01

    The selection of landing and exploration sites for interplanetary robotic or human missions is a complex task. Historically it has been labor-intensive, with large groups of scientists manually interpreting a planetary surface across a variety of datasets to identify potential sites based on science and engineering constraints. This search process can be lengthy, and excellent sites may get overlooked when the aggregate value of site selection criteria is non-obvious or non-intuitive. As planetary data collection leads to Big Data repositories and a growing set of selection criteria, scientists will face a combinatorial search space explosion that requires scalable, automated assistance. We are currently exploring more general computer-aided discovery techniques in the context of planetary surface deformation phenomena that can lend themselves to application in the landing site search problem. In particular, we are developing a general software framework that addresses key difficulties: characterizing a given phenomenon or site based on data gathered from multiple instruments (e.g. radar interferometry, gravity, thermal maps, or GPS time series), and examining a variety of possible workflows whose individual configurations are optimized to isolate different features. The framework allows algorithmic pipelines and hypothesized models to be perturbed or permuted automatically within well-defined bounds established by the scientist. For example, even simple choices for outlier and noise handling or data interpolation can drastically affect the detectability of certain features. These techniques aim to automate repetitive tasks that scientists routinely perform in exploratory analysis, and make them more efficient and scalable by executing them in parallel in the cloud. We also explore ways in which machine learning can be combined with human feedback to prune the search space and converge to desirable results. Acknowledgements: We acknowledge support from NASA AIST

  3. Methodologie, Eclectisme...et Bricolage Pedagogique (Methodology, Selective Teaching Methods... and Pedagogical Odds and Ends).

    Science.gov (United States)

    De Salins, Genevieve-Dominique

    1996-01-01

    Focuses on the contents of foreign language texts and the types of foreigners who learn French. The article notes the tone of didactic discussions in these manuals and questions the usage of two terms appearing there--"methodology" and "selection." (Author/CK)

  4. The Finnish final disposal programme proceeds to the site selection

    International Nuclear Information System (INIS)

    Seppaelae, T.

    1999-01-01

    Research for the selection of the final disposal site has been carried out already since the beginning of 1980's. Field studies were started in 1987: In the recent years, studied sites have included Olkiluoto in Eurajoki, Haestholmen in Loviisa, Romuvaara in Kuhmo and Kivetty in Aeaenekoski. Based on 40 years operation of four power plant units, the estimate for the accumulation of spent fuel to be disposed of in Finland is 2,600 tU. A 'Decision in Principle' is needed from the Finnish government to select the final disposal site, Posiva submitted the application for a policy decision in May 1999. The intended site of the facility is Olkiluoto which produces most of the spent fuel in Finland: A disposal would minimise the need of transports. In a poll among the inhabitants of Eurajoki, 60 per cent approved the final disposal facility. After a positive decision of the government, Posiva will construct an underground research facility in Olkiluoto. The construction of the final disposal facility will take place in the 2010's, the facility should be operational in 2020. (orig.) [de

  5. Methodology for Assessing the Status of a Physical Protection System on the Basis of Agency Inspections and Site Self-Assessments in Rosatom

    International Nuclear Information System (INIS)

    Piskarev, Alexandr S.; Babkin, Vladimir; Izmaylov, Alexandr V.; Kulikovsky, Mikhail; Matveev, V.A.; Shull, Douglas; Livingston, Linwood H.

    2010-01-01

    The Methodology presents general approaches to the assessment of PPS status including criteria and indicators of such assessment and procedures for evaluating different aspects of physical protection, taking into consideration the significance of the criteria. The regulation includes specific methods of the application of the criteria for the evaluation of different aspects of physical protection (PP), as well as for the comprehensive assessment of the PPS status in the form of text, tables, diagrams and examples. The Methodology is intended to facilitate agency inspections and site self-assessments of PPS at a NS as well as evaluation of their results. This regulation was approved by Rosatom Headquarters in October 2008 and is currently used in the process of agency PP inspections. The Methodology was discussed by Rosatom PP specialists, who take part in agency inspections and site self-assessments, at a workshop in Moscow, June 2009, and was presented at the 4th MPC and A Conference in Obninsk, October 2009. This paper presents the methodology and its practical application during Rosatom agency inspections and site self-assessments.

  6. A New Integrated Threshold Selection Methodology for Spatial Forecast Verification of Extreme Events

    Science.gov (United States)

    Kholodovsky, V.

    2017-12-01

    Extreme weather and climate events such as heavy precipitation, heat waves and strong winds can cause extensive damage to the society in terms of human lives and financial losses. As climate changes, it is important to understand how extreme weather events may change as a result. Climate and statistical models are often independently used to model those phenomena. To better assess performance of the climate models, a variety of spatial forecast verification methods have been developed. However, spatial verification metrics that are widely used in comparing mean states, in most cases, do not have an adequate theoretical justification to benchmark extreme weather events. We proposed a new integrated threshold selection methodology for spatial forecast verification of extreme events that couples existing pattern recognition indices with high threshold choices. This integrated approach has three main steps: 1) dimension reduction; 2) geometric domain mapping; and 3) thresholds clustering. We apply this approach to an observed precipitation dataset over CONUS. The results are evaluated by displaying threshold distribution seasonally, monthly and annually. The method offers user the flexibility of selecting a high threshold that is linked to desired geometrical properties. The proposed high threshold methodology could either complement existing spatial verification methods, where threshold selection is arbitrary, or be directly applicable in extreme value theory.

  7. The procedure of alternative site selection within the report of the study group on the radioactive waste final repository selection process (AKEnd)

    International Nuclear Information System (INIS)

    Brenner, M.

    2005-01-01

    The paper discusses the results of the report of the study group on the radioactive waste final repository selection process with respect to the alternative site selection procedure. Key points of the report are the long-term safety, the alternativity of sites and the concept of one repository. The critique on this report is focussed on the topics site selection and licensing procedures, civil participation, the factor time and the question of cost

  8. Methodology proposal for matrices selection for hazardous wastes stabilization

    International Nuclear Information System (INIS)

    Silva, Eliane Magalhaes Pereira da; Vasconcelos, Vanderley de; Jordao, Elizabete

    2002-01-01

    The issues of environmental pollution by solid waste arised with the onset of the industrial era. Coping with these issues has been even worsen due to the lack of consciousness and planning for a sound waste management. In addition, most of the companies have found it difficult to keep themselves competitive in a global economy due to the lack of information and by not having access to waste management new technologies. On the other hand, solidification/stabilization technologies are usual practices in the nuclear industry. The aim of this paper is to present a proposal to the development of a methodology, for selection of immobilization binders for hazardous waste, based on the available technologies in the nuclear industry. (author)

  9. Proceedings of the tenth annual DOE low-level waste management conference: Session 2: Site performance assessment

    Energy Technology Data Exchange (ETDEWEB)

    1988-12-01

    This document contains twelve papers on various aspects of low-level radioactive waste management. Topics of this volume include: performance assessment methodology; remedial action alternatives; site selection and site characterization procedures; intruder scenarios; sensitivity analysis procedures; mathematical models for mixed waste environmental transport; and risk assessment methodology. Individual papers were processed separately for the database. (TEM)

  10. Finnish HLW disposal programme : site selection in 2000

    International Nuclear Information System (INIS)

    Ryhsnen, Veijo

    1997-01-01

    This paper covers the technical concepts for final disposal in the Finnish geological conditions, the approach for site selection and implementation, the safety assessments and development of criteria, the environmental impact assessment, the licensing stages and acceptance, and the financial provisions, the project organization in 1997 - 2000. 2 refs., 9 figs

  11. Finnish HLW disposal programme : site selection in 2000

    Energy Technology Data Exchange (ETDEWEB)

    Ryhsnen, Veijo [Posiva Oy, Helsinki (Finland)

    1997-12-31

    This paper covers the technical concepts for final disposal in the Finnish geological conditions, the approach for site selection and implementation, the safety assessments and development of criteria, the environmental impact assessment, the licensing stages and acceptance, and the financial provisions, the project organization in 1997 - 2000. 2 refs., 9 figs.

  12. The procedure of alternative site selection within the report of the study group on the radioactive waste final repository selection process (AKEnd)

    International Nuclear Information System (INIS)

    Nies, A.

    2005-01-01

    The study group on the selection procedures of radioactive waste final repository sites has presented the report in December 2002. The author dicusses the consequences of this report with respect to the site selection focussing on two topics: the serach for the best possible site and the prevention of prejudices

  13. Development and application of a decision methodology for the planning of nuclear research and development in Saudi Arabia

    International Nuclear Information System (INIS)

    Abulfaraj, W.H.

    1983-01-01

    The thesis adapts two formal decision methodologies for the planning and development of a Nuclear Research Center for the Kingdom of Saudi Arabia. The methodologies are useful for the selection of alternative nuclear energy strategies. Multiattribute utility theory (MUT) and fuzzy set theory (FST) are selected to accommodate for decision makers' preferences and quick decision. MUT is employed to evaluate four appropriate research center facilities to determine the optimal choice therefrom in order to meet the needs of the proposed center. FST is used to handle site selection decision for the center. Procurement and siting decisions in Saudi Arabia for equipment are based on the demonstrated performance of operating units. Certain procedures discussed in detail in the dissertation reflect this modus operandi. 106 refs

  14. Assessment parameters for coal-fired generation plant site selection

    OpenAIRE

    Abbas, Ahmad Rosly; Low, K. S.; Ahmad, Ir. Mohd Noh; Chan, J. H.; Sasekumar, A.; Abdul Ghaffar, Fauza; Osman Salleh, Khairulmaini; Raj, John K.; Abdul Yamin, Saad; Wan Aida, Wan Zahari; Phua, Y. T.; Phua, Y. N.; Wong, Y. Y.; Jamaludin, Ir. Mashitah; Jaafar, Shaari

    2005-01-01

    In order to meet future demand for electricity, Tenaga Nasional Berhad (TNB) is committedto the long-term strategic planning in locating suitable sites for future development of power stations.Site selection is an important process in the early planning stage of any power plant development asit will have significant implications on the capital investment, operational as well as the environmentand socio-economic costs of the power plant.The aim of this presentation is to briefly describe the t...

  15. Development of the methodology on priority of element-specific biosphere parameters for geological disposal applicable to any proposed repository site

    International Nuclear Information System (INIS)

    Kato, Tomoko; Ohi, Takao; Suzuki, Yuji

    2009-01-01

    It is difficult to acquire all of biosphere parameters for geological disposal at the repository site because several hundreds of the parameters have to be dealt with in one calculation case of the biosphere assessment. Before site-specific activities, it is important to develop the data acquisition methodology of biosphere parameters applicable to any proposed repository site. The methodology for identification of the priority of the parameters was developed for the effective data acquisition of biosphere parameters at the site. First of all, flow diagram was constructed to evaluate the availability of the existing generic biosphere dataset. It was found to be effective for the data acquisition at the site to focus on the element-specific parameters with the existing dataset. Secondly, the priority of the data acquisition was identified for element-specific parameters at the site, with considering the variation of dose rate by combining the significant element-specific parameters. The availability of the existing generic biosphere dataset and the priority on data acquisition were identified for the element-specific parameters of key radionuclides in the safety assessment of geological disposal that should be acquired at the site. This priority list would be useful for effective data acquisition at the site. (author)

  16. Siting Study Framework and Survey Methodology for Marine and Hydrokinetic Energy Project in Offshore Southeast Florida

    Energy Technology Data Exchange (ETDEWEB)

    Vinick, Charles; Riccobono, Antonino, MS; Messing, Charles G., Ph.D.; Walker, Brian K., Ph.D.; Reed, John K., Ph.D.

    2012-02-28

    Dehlsen Associates, LLC was awarded a grant by the United States Department of Energy (DOE) Golden Field Office for a project titled 'Siting Study Framework and Survey Methodology for Marine and Hydrokinetic Energy Project in Offshore Southeast Florida,' corresponding to DOE Grant Award Number DE-EE0002655 resulting from DOE funding Opportunity Announcement Number DE-FOA-0000069 for Topic Area 2, and it is referred to herein as 'the project.' The purpose of the project was to enhance the certainty of the survey requirements and regulatory review processes for the purpose of reducing the time, efforts, and costs associated with initial siting efforts of marine and hydrokinetic energy conversion facilities that may be proposed in the Atlantic Ocean offshore Southeast Florida. To secure early input from agencies, protocols were developed for collecting baseline geophysical information and benthic habitat data that can be used by project developers and regulators to make decisions early in the process of determining project location (i.e., the siting process) that avoid or minimize adverse impacts to sensitive marine benthic habitat. It is presumed that such an approach will help facilitate the licensing process for hydrokinetic and other ocean renewable energy projects within the study area and will assist in clarifying the baseline environmental data requirements described in the U.S. Department of the Interior Bureau of Ocean Energy Management, Regulation and Enforcement (formerly Minerals Management Service) final regulations on offshore renewable energy (30 Code of Federal Regulations 285, published April 29, 2009). Because projects generally seek to avoid or minimize impacts to sensitive marine habitats, it was not the intent of this project to investigate areas that did not appear suitable for the siting of ocean renewable energy projects. Rather, a two-tiered approach was designed with the first step consisting of gaining overall insight

  17. Selecting Suitable Sites for Wind Energy Development in Ghana ...

    African Journals Online (AJOL)

    Selecting Suitable Sites for Wind Energy Development in Ghana. ... In the event of shortages in petroleum products, these power plants will have ... Layers of these criteria setting were combined using the overlay function in a GIS environment.

  18. A hierarchical modeling methodology for the definition and selection of requirements

    Science.gov (United States)

    Dufresne, Stephane

    This dissertation describes the development of a requirements analysis methodology that takes into account the concept of operations and the hierarchical decomposition of aerospace systems. At the core of the methodology, the Analytic Network Process (ANP) is used to ensure the traceability between the qualitative and quantitative information present in the hierarchical model. The proposed methodology is implemented to the requirements definition of a hurricane tracker Unmanned Aerial Vehicle. Three research objectives are identified in this work; (1) improve the requirements mapping process by matching the stakeholder expectations with the concept of operations, systems and available resources; (2) reduce the epistemic uncertainty surrounding the requirements and requirements mapping; and (3) improve the requirements down-selection process by taking into account the level of importance of the criteria and the available resources. Several challenges are associated with the identification and definition of requirements. The complexity of the system implies that a large number of requirements are needed to define the systems. These requirements are defined early in the conceptual design, where the level of knowledge is relatively low and the level of uncertainty is large. The proposed methodology intends to increase the level of knowledge and reduce the level of uncertainty by guiding the design team through a structured process. To address these challenges, a new methodology is created to flow-down the requirements from the stakeholder expectations to the systems alternatives. A taxonomy of requirements is created to classify the information gathered during the problem definition. Subsequently, the operational and systems functions and measures of effectiveness are integrated to a hierarchical model to allow the traceability of the information. Monte Carlo methods are used to evaluate the variations of the hierarchical model elements and consequently reduce the

  19. Stability of choice in the honey bee nest-site selection process.

    Science.gov (United States)

    Nevai, Andrew L; Passino, Kevin M; Srinivasan, Parthasarathy

    2010-03-07

    We introduce a pair of compartment models for the honey bee nest-site selection process that lend themselves to analytic methods. The first model represents a swarm of bees deciding whether a site is viable, and the second characterizes its ability to select between two viable sites. We find that the one-site assessment process has two equilibrium states: a disinterested equilibrium (DE) in which the bees show no interest in the site and an interested equilibrium (IE) in which bees show interest. In analogy with epidemic models, we define basic and absolute recruitment numbers (R(0) and B(0)) as measures of the swarm's sensitivity to dancing by a single bee. If R(0) is less than one then the DE is locally stable, and if B(0) is less than one then it is globally stable. If R(0) is greater than one then the DE is unstable and the IE is stable under realistic conditions. In addition, there exists a critical site quality threshold Q(*) above which the site can attract some interest (at equilibrium) and below which it cannot. We also find the existence of a second critical site quality threshold Q(**) above which the site can attract a quorum (at equilibrium) and below which it cannot. The two-site discrimination process, in which we examine a swarm's ability to simultaneously consider two sites differing in both site quality and discovery time, has a stable DE if and only if both sites' individual basic recruitment numbers are less than one. Numerical experiments are performed to study the influences of site quality on quorum time and the outcome of competition between a lower quality site discovered first and a higher quality site discovered second. 2009 Elsevier Ltd. All rights reserved.

  20. The importance of site selection for setting up a wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Raghunandan, A.; Gowda, G.; Pandian, A. [MS RAMAIAH Institute of Technology, Bangalore (India); Ramanan, G. [RV College of Engineering, Bangalore (India)

    2012-07-01

    A wind energy system transforms the kinetic energy of the wind into mechanical or electrical energy that can be harnessed for practical use. Building a wind turbine is far more than simply a matter of finding a field or mountaintop where the wind is blowing and plopping one down. A great deal of attention should be given to finding the proper site for a wind turbine. The main factor one should consider is the average speed of the wind over an extended time. Estimation of the wind power potential for a site is the most important requirement for selecting a site for the installation of a wind turbine. Also wind turbines should be sited well above trees, buildings, and other obstacles else, the result will be poor energy production and increased wear and tear on the turbine. One way to get rid of this is to place the wind turbine on a tall tower. When selecting a place for setting up a wind turbine, engineers consider factors such as wind hazards, characteristics of the land that affect wind speed, and the effects of one turbine on nearby turbines in wind farms. The other factors that are important for selecting a site for installation of wind turbines are Hill effect, Roughness, or the amount of friction that Earth's surface exerts on wind, Tunnel effect, Turbulence, Variations in wind speed, Wind obstacles and Wind shear. This paper will emphasis on the necessary inspections which are to be done on the site before installing a Wind Turbine. (Author)

  1. Selection of phage-displayed accessible recombinant targeted antibodies (SPARTA): methodology and applications.

    Science.gov (United States)

    D'Angelo, Sara; Staquicini, Fernanda I; Ferrara, Fortunato; Staquicini, Daniela I; Sharma, Geetanjali; Tarleton, Christy A; Nguyen, Huynh; Naranjo, Leslie A; Sidman, Richard L; Arap, Wadih; Bradbury, Andrew Rm; Pasqualini, Renata

    2018-05-03

    We developed a potentially novel and robust antibody discovery methodology, termed selection of phage-displayed accessible recombinant targeted antibodies (SPARTA). This combines an in vitro screening step of a naive human antibody library against known tumor targets, with in vivo selections based on tumor-homing capabilities of a preenriched antibody pool. This unique approach overcomes several rate-limiting challenges to generate human antibodies amenable to rapid translation into medical applications. As a proof of concept, we evaluated SPARTA on 2 well-established tumor cell surface targets, EphA5 and GRP78. We evaluated antibodies that showed tumor-targeting selectivity as a representative panel of antibody-drug conjugates (ADCs) and were highly efficacious. Our results validate a discovery platform to identify and validate monoclonal antibodies with favorable tumor-targeting attributes. This approach may also extend to other diseases with known cell surface targets and affected tissues easily isolated for in vivo selection.

  2. A geographic information system and multi criteria analysis method for site selection of spent nuclear fuel disposal

    International Nuclear Information System (INIS)

    Martins, Vivian Borges

    2009-01-01

    This thesis aims to develop a site selection methodology for the construction of final repository for the spent nuclear fuel disposal, by using geographic information systems (GIS) and multi-criteria decision analysis. Decision making processes of this kind are often complex, given the great number of space parameters to consider and also the typically conflicting opinions of the diverse stake holders. By using GIS, data from different space parameters can be quickly and reliably stored, treated and analyzed. Multi-criteria techniques allow for the incorporation of different stake holders' opinions. These tools, when jointly used, allow for the decision process to be more transparent, quick and reliable. The method developed was applied to the particular case of the state of Rio de Janeiro. Weights obtained from an expert panel and also by using the Hierarchical Analysis Method and cartographic data were combined in the GIS. The application showed that it is possible not only to select and classify areas as to their aptness for the proposed objective, but also to exclude those clearly inadequate areas, thus optimizing the selection process by reducing the search space and consequently minimizing costs and the time spent in the search. (author)

  3. The Utility of Geographical Information Systems (GIS) in Systems-Oriented Obesity Intervention Projects: The Selection of Comparable Study Sites for a Quasi-Experimental Intervention Design—TX CORD

    Science.gov (United States)

    Byars, Allison; Byrd-Williams, Courtney; Sharma, Shreela V.; Durand, Casey; Hoelscher, Deanna M.; Butte, Nancy F.; Kelder, Steven H.

    2015-01-01

    Abstract Background: The Texas Childhood Obesity Research Demonstration project (TX CORD) uses a systems-oriented approach to address obesity that includes individual and family interventions, community-level action, as well as environmental and policy initiatives. Given that randomization is seldom possible in community-level intervention studies, TX CORD uses a quasi-experimental design. Comparable intervention and comparison study sites are needed to address internal validity bias. Methods: TX CORD was designed to be implemented in low-income, ethnically diverse communities in Austin and Houston, Texas. A three-stage Geographical Information System (GIS) methodology was used to establish and ascertain the comparability of the intervention and comparison study sites. Census tract (stage 1) and school (stage 2) data were used to identify spatially exclusive geographic areas that were comparable. In stage 3, study sites were compared on demographic characteristics, socioeconomic status (SES), food assets, and physical activity (PA) assets. Student's t-test was used to examine significant differences between the selected sites. Results: The methodology that was used resulted in the selection of catchment areas with demographic and socioeconomic characteristics that fit the target population: ethnically diverse population; lower-median household income; and lower home ownership rates. Additionally, the intervention and comparison sites were statistically comparable on demographic and SES variables, as well as food assets and PA assets. Conclusions: This GIS approach can provide researchers, program evaluators, and policy makers with useful tools for both research and practice. Area-level information that allows for robust understanding of communities can enhance analytical procedures in community health research and offer significant contributions in terms of community assessment and engagement. PMID:25587670

  4. A tsunami PSA methodology and application for NPP site in Korea

    International Nuclear Information System (INIS)

    Kim, Min Kyu; Choi, In-Kil

    2012-01-01

    Highlights: ► A methodology of tsunami PSA was developed in this study. ► Tsunami return period was evaluated by empirical method using historical tsunami record and tidal gauge record. ► Procedure of tsunami fragility analysis was established and target equipments and structures for investigation of tsunami fragility assessment were selected. ► A sample fragility calculation was performed for the equipment in Nuclear Power Plant. ► Accident sequence of tsunami event is developed by according to the tsunami run-up and draw down, and tsunami induced core damage frequency (CDF) is determined. - Abstract: A methodology of tsunami PSA was developed in this study. A tsunami PSA consists of tsunami hazard analysis, tsunami fragility analysis and system analysis. In the case of tsunami hazard analysis, evaluation of tsunami return period is a major task. For the evaluation of tsunami return period, numerical analysis and empirical method can be applied. In this study, tsunami return period was evaluated by empirical method using historical tsunami record and tidal gauge record. For the performing a tsunami fragility analysis, procedure of tsunami fragility analysis was established and target equipments and structures for investigation of tsunami fragility assessment were selected. A sample fragility calculation was performed for the equipment in Nuclear Power Plant. In the case of system analysis, accident sequence of tsunami event is developed by according to the tsunami run-up and draw down, and tsunami induced core damage frequency (CDF) is determined. For the application to the real Nuclear Power Plant, the Ulchin 56 NPP which located in east coast of Korean peninsula was selected. Through this study, whole tsunami PSA working procedure was established and example calculation was performed for one of real Nuclear Power Plant in Korea. But for more accurate tsunami PSA result, there are many researches needed for evaluation of hydrodynamic force, effect of

  5. Site selection and characterization processes for deep geologic disposal of high level nuclear waste

    International Nuclear Information System (INIS)

    Costin, L.S.

    1997-10-01

    In this paper, the major elements of the site selection and characterization processes used in the US high level waste program are discussed. While much of the evolution of the site selection and characterization processes have been driven by the unique nature of the US program, these processes, which are well defined and documented, could be used as an initial basis for developing site screening, selection, and characterization programs in other countries. Thus, this paper focuses more on the process elements than the specific details of the US program

  6. Long-term stabilization considerations for decommissioned and reclaimed uranium sites

    International Nuclear Information System (INIS)

    Abt, S.R.; Nelson, J.D.; Johnson, T.L.

    1988-01-01

    The long-term stabilization of decommissioned uranium mill sites and of reclaimed uranium mill tailings sites encompass a broad spectrum of design capabilities. This paper presents a few of the quantitative methodologies recently developed or refined to evaluate physical factors (i.e. precipitation, fluvial geomorphology, stable slope, slope stabilization with riprap and riprap selection) that influence long-term stabilization of uranium mill and mill tailings sites. It is acknowledged that the degree of refinement of these methodologies are in their infancy and that extensive research and development are warranted to increase the level of assurance. However, these methodologies provide an initial guideline for evaluating long-term stabilization that has not been previously existed. The purpose of this paper is to present a review of currently available state-of-the-art engineering techniques and methodologies for the evaluation of reclamation plans designed to provide long-term stability against potential failure modes. In some cases, evaluative techniques have been developed for long-term stabilization where methodologies have not previously existed. Each methodology to be presented represents a starting point upon which additional research and/or development may be warranted

  7. Overview of ONWI'S Salt site selection program

    International Nuclear Information System (INIS)

    Madia, W.J.

    1983-01-01

    In the past year, activities in the salt site selection program of the Office of Nuclear Waste Isolation (ONWI) have focused on narrowing the number and size of areas under consideration as candidate repository sites. The progressive focusing is illustrated. Bedded salt, in the Permian Basin of West Texas and the Paradox Basin of Utah, and salt domes in the Gulf Coast Salt Dome Region (including parts of East Texas, Louisiana, and Mississippi) have been the subjects of geologic, environmental, and socioeconomic characterization of progressively greater detail as the screening process has proceeded. Detailed, field-oriented research and testing have superceded broad-based studies relying heavily on literature and other existing data. Coinciding with the increased field activities has been the publication of results and recommendations resulting from earlier program efforts

  8. Methodological Adaptations for Investigating the Perceptions of Language-Impaired Adolescents Regarding the Relative Importance of Selected Communication Skills

    Science.gov (United States)

    Reed, Vicki A.; Brammall, Helen

    2006-01-01

    This article describes the systematic and detailed processes undertaken to modify a research methodology for use with language-impaired adolescents. The original methodology had been used previously with normally achieving adolescents and speech pathologists to obtain their opinions about the relative importance of selected communication skills…

  9. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1992-03-01

    This report describes risk assessment methodology associated with the remedial action programs at the Hanford Reservation. Topics addressed include human health evaluation, pollutant and radionuclide transport through the environment, and environmental transport pathways

  10. Analysis of Multi-Criteria Evaluation Method of Landfill Site Selection for Municipal Solid Waste Management

    Science.gov (United States)

    Mohammed, Habiba Ibrahim; Majid, Zulkepli; Yusof, Norhakim Bin; Bello Yamusa, Yamusa

    2018-03-01

    Landfilling remains the most common systematic technique of solid waste disposal in most of the developed and developing countries. Finding a suitable site for landfill is a very challenging task. Landfill site selection process aims to provide suitable areas that will protect the environment and public health from pollution and hazards. Therefore, various factors such as environmental, physical, socio-economic, and geological criteria must be considered before siting any landfill. This makes the site selection process vigorous and tedious because it involves the processing of large amount of spatial data, rules and regulations from different agencies and also policy from decision makers. This allows the incorporation of conflicting objectives and decision maker preferences into spatial decision models. This paper particularly analyzes the multi-criteria evaluation (MCE) method of landfill site selection for solid waste management by means of literature reviews and surveys. The study will help the decision makers and waste management authorities to choose the most effective method when considering landfill site selection.

  11. Analysis of Multi-Criteria Evaluation Method of Landfill Site Selection for Municipal Solid Waste Management

    Directory of Open Access Journals (Sweden)

    Ibrahim Mohammed Habiba

    2018-01-01

    Full Text Available Landfilling remains the most common systematic technique of solid waste disposal in most of the developed and developing countries. Finding a suitable site for landfill is a very challenging task. Landfill site selection process aims to provide suitable areas that will protect the environment and public health from pollution and hazards. Therefore, various factors such as environmental, physical, socio-economic, and geological criteria must be considered before siting any landfill. This makes the site selection process vigorous and tedious because it involves the processing of large amount of spatial data, rules and regulations from different agencies and also policy from decision makers. This allows the incorporation of conflicting objectives and decision maker preferences into spatial decision models. This paper particularly analyzes the multi-criteria evaluation (MCE method of landfill site selection for solid waste management by means of literature reviews and surveys. The study will help the decision makers and waste management authorities to choose the most effective method when considering landfill site selection.

  12. Evaluation of an Improved Branch-Site Likelihood Method for Detecting Positive Selection at the Molecular Level

    DEFF Research Database (Denmark)

    Zhang, Jianzhi; Nielsen, Rasmus; Yang, Ziheng

    2005-01-01

    of interest, while test 2 had acceptable false-positive rates and appeared robust against violations of model assumptions. As test 2 is a direct test of positive selection on the lineages of interest, it is referred to as the branch-site test of positive selection and is recommended for use in real data......Detecting positive Darwinian selection at the DNA sequence level has been a subject of considerable interest. However, positive selection is difficult to detect because it often operates episodically on a few amino acid sites, and the signal may be masked by negative selection. Several methods have...... been developed to test positive selection that acts on given branches (branch methods) or on a subset of sites (site methods). Recently, Yang, Z., and R. Nielsen (2002. Codon-substitution models for detecting molecular adaptation at individual sites along specific lineages. Mol. Biol. Evol. 19...

  13. Brownfields Technology Primer: Selecting and Using Phytoremediation for Site Cleanup

    Science.gov (United States)

    This primer explains the phytoremediation process, discusses the potential advantages and considerations in selecting phytoremediation to clean up brownfields sites, and provides information on additional resources about phytoremediation.

  14. Demonstration of an infiltration evaluation methodology

    International Nuclear Information System (INIS)

    Smyth, J.D.; Gee, G.W.; Kincaid, C.T.; Nichols, W.M.; Bresler, E.

    1990-07-01

    An Infiltration Evaluation Methodology (IEM) was developed for the US Nuclear Regulatory Commission (NRC) by Pacific Northwest Laboratory (PNL) to provide a consistent, well formulated approach for evaluating drainage through engineered covers at low-level radioactive waste (LLW) sites. The methodology is designed to help evaluate the ability of proposed waste site covers to minimize drainage for LLW site license applications and for sites associated with the Uranium Mill Tailings Remedial Action (UMTRA) program. The objective of this methodology is to estimate the drainage through an engineered burial site cover system. The drainage estimate can be used as an input to a broader performance assessment methodology currently under development by the NRC. The methodology is designed to simulate, at the field scale, significant factors and hydrologic conditions which determine or influence estimates of infiltration, long-term moisture content profiles, and drainage from engineered covers and barriers. The IEM developed under this study acknowledges the uncertainty inherent in soil properties and quantifies the influence of such uncertainty on the estimates of drainage in engineered cover systems at waste disposal sites. 6 refs., 1 fig

  15. Application of an integrated multi-criteria decision making AHP-TOPSIS methodology for ETL software selection.

    Science.gov (United States)

    Hanine, Mohamed; Boutkhoum, Omar; Tikniouine, Abdessadek; Agouti, Tarik

    2016-01-01

    Actually, a set of ETL software (Extract, Transform and Load) is available to constitute a major investment market. Each ETL uses its own techniques for extracting, transforming and loading data into data warehouse, which makes the task of evaluating ETL software very difficult. However, choosing the right software of ETL is critical to the success or failure of any Business Intelligence project. As there are many impacting factors in the selection of ETL software, the same process is considered as a complex multi-criteria decision making (MCDM) problem. In this study, an application of decision-making methodology that employs the two well-known MCDM techniques, namely Analytic Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods is designed. In this respect, the aim of using AHP is to analyze the structure of the ETL software selection problem and obtain weights of the selected criteria. Then, TOPSIS technique is used to calculate the alternatives' ratings. An example is given to illustrate the proposed methodology. Finally, a software prototype for demonstrating both methods is implemented.

  16. Analysis of the portfolio of sites to characterize for selecting a nuclear repository

    International Nuclear Information System (INIS)

    Keeney, R.L.

    1987-01-01

    The US Department of Energy has selected three sites, from five nominated, to characterize for a nuclear repository to permanently dispose of nuclear waste. This decision was made without the benefit of an analysis of this portfolio problem. This paper analyzes different portfolios of three sites for simultaneous characterization and strategies for sequential characterization. Characterization of each site, which involves significant subsurface excavation, is now estimated to cost $1 billion. Mainly because of the high characterization costs, sequential characterization strategies are identified which are the equivalent of $1.7-2.0 billion less expensive than the selected DOE simultaneous characterization of the three sites. If three sites are simultaneously characterized, one portfolio is estimated to be the equivalent of $100-400 million better than the selected DOE portfolio. Because of these potential savings and several other complicating factors that may influence the relative desirability of characterization strategies, a thorough analysis of characterization strategies that addresses the likelihood of finding disqualifying conditions during site characterization, uncertainties, and dependencies in forecast site repository costs, preclosure and postclosure health and safety impacts, potential delays of both sequential and simultaneous characterization strategies, and the environmental, socioeconomic, and health and safety impacts of characterization activities is recommended

  17. Performance evaluation of the technical capabilities of DOE sites for disposal of mixed low-level waste. Volume 1: Executive summary

    International Nuclear Information System (INIS)

    1996-03-01

    A team of analysts designed and conducted a performance evaluation (PE) to estimate the technical capabilities of fifteen Department of Energy sites for disposal of mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Volume 1 summarizes the process for selecting the fifteen sites, the methodology used in the evaluation, and the conclusions derived from the evaluation. Volume 1 is an executive summary both of the PE methodology and of the results obtained from the PEs. While this volume briefly reviews the scope and method of analyses, its main objective is to emphasize the important insights and conclusions derived from the conduct of the PEs. Volume 2 provides details about the site-selection process, the performance-evaluation methodology, and the overall results of the analysis. Volume 3 contains detailed evaluations of the fifteen sites and discussions of the results for each site

  18. Site selection of radioactive waste repository in the Republic of Croatia

    International Nuclear Information System (INIS)

    Saler, A.

    1992-01-01

    The radioactive waste repository site-selection procedure in Croatia is divided into two stages: the first, related to the exclusionary screening of the national territory and comparison of potential areas in order to identify preferred sites, acceptable for inclusion into the Regional Plan; and the second, comprising all necessary field investigations as well as additional site-characterization tasks planned to be worked out at a preferred sites. Several potential areas, representing an intermediate goal of the first stage, are defined till now. (author) [hr

  19. Experience in selection and characterization of sites for geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    1997-12-01

    An important matter in the development of a geological repository for disposal radioactive waste is the selection of a site that has characteristics that are favorable for isolation. A number of Member States have had national programmes under way for several decades to investigate sites to gather the geological information needed to design and construct a safe repository. The purpose of this report is to document this experience and to summarize what has been learned about the site selection and investigation process. It is hoped it will be of interest to scientists and engineers working in national disposal programmes by providing them information and key references regarding the disposal programmes in other countries. It may also be of interest to members of the public and to decision makers wanting an overview of the worldwide status of programmes to select and characterize geological disposal sites for radioactive waste

  20. Non-coplanar automatic beam orientation selection in cranial IMRT: a practical methodology

    Energy Technology Data Exchange (ETDEWEB)

    Llacer, Jorge [EC Engineering Consultants LLC, 130 Forest Hill Drive, Los Gatos, CA 95032 (United States); Li Sicong [Department of Radiation Oncology, University of Nebraska Medical Center, Omaha, NE 68198 (United States); Agazaryan, Nzhde; Solberg, Timothy D [Department of Radiation Oncology, University of California, Los Angeles, CA 90095 (United States); Promberger, Claus [BrainLAB AG, Kapellenstrasse 12, 85622 Feldkirchen (Germany)], E-mail: escalivat@jllacer.com, E-mail: sl1@unmc.edu, E-mail: NAgazaryan@mednet.ucla.edu, E-mail: claus.promberger@brainlab.com, E-mail: Timothy.Solberg@utsouthwestern.edu

    2009-03-07

    This paper proposes a method for automatic selection of beam orientations in non-coplanar cranial IMRT. Methods of computer vision, beam's eye view techniques and neural networks are used to define a new geometry-based methodology that leads to treatment plans for cranial lesions that are comparable in quality to those generated by experienced radiation physicists. The automatic beam selection (ABS) process can be carried out in clinically useful computation times, in 1 min or less for most cases. In the process of describing the ABS process, it is shown that the cranial beam orientation optimization problem is mathematically ill posed, with the expectation that a large number of solutions will lead to similar results. Nevertheless, there are better and worse solutions and we show that the proposed ABS process, by its design, has to lead to one of the better ones. We have carried out extensive tests with 14 patients with beam selection tasks ranging from the rather simple to quite complex. The ABS process has always yielded optimizations with results that are considered good for clinic use. Seven-beam coplanar optimizations for some of the patients have also been investigated. Comparisons with non-coplanar optimizations indicate in which cases the simpler coplanar plans can be used to advantage. Parameters used in the comparisons are dose-volume histograms, minimum and maximum PTV doses, equivalent uniform doses for the PTV and OARs, and treatment volume, conformity and normal tissue indices. It is felt that the current ABS methodology is ready for extensive clinical tests.

  1. Site selection experience for a new low-level radioactive waste storage/disposal facility at the Savannah River Plant

    International Nuclear Information System (INIS)

    Towler, O.A.; Cook, J.R.; Helton, B.D.

    1985-10-01

    Preliminary performance criteria and site selection guides specific to the Savannah River Plant, were developed for a new low-level radioactive waste storage/disposal facility. These site selection guides were applied to seventeen potential sites identified at SRP. The potential site were ranked based on how well they met a set of characteristics considered important in site selection for a low-level radioactive waste disposal facility. The characteristics were given a weighting factor representing its relative importance in meeting site performance criteria. A candidate site was selected and will be the subject of a site characterization program

  2. Site selection for deep geologic repositories - Consequences for society, economy and environment

    International Nuclear Information System (INIS)

    2010-03-01

    In a few years, Switzerland will make the decision regarding site selection for geological underground repositories for the storage of radioactive wastes. Besides the safety issue, many citizens are interested in how such a repository will affect environment, economy and society in the selected site's region. This brochure summarizes the results of many studies on the socio-economic impacts of nuclear waste repositories. Radioactive wastes must be stored in such a way that mankind and environment are safely protected for a long period of time. How this goal may be achieved, is already known: geologic deep repositories warrant long-term safety. For the oncoming years in Switzerland the question is where the repository will be built. The search for an appropriate site for a repository in the proposed regions will launch discussions. Within the participative framework the regions may bring their requests. The demonstration of the safety of potential repository sites has the highest priority in the selection process. In the third procedural step additional rock investigations will be made. The socio-economic studies and the experience with existing plants show that radioactive waste management plants can be built and operated in good agreement with environmental requirements. The radioactive wastes in a deep underground repository are stored many hundred meters below the Earth's surface. There, they are isolated from our vital space. Technical barriers and the surrounding dense rock confinement prevent the release of radioactive materials into the environment. A deep repository has positive consequences for the regional economy. It increases trade and value creation and creates work places. The socio-economic impacts practically extend over one century, but strongly vary with time; they are the largest during the building period. High life quality and a positive population development in the selected site region are compatible with a deep repository. A fair and

  3. Soil attributes drive nest-site selection by the campo miner Geositta poeciloptera

    Science.gov (United States)

    Teixeira, João Paulo Gusmão; Solar, Ricardo; Vasconcelos, Bruno Nery F.; Fernandes, Raphael B. A.; Lopes, Leonardo Esteves

    2018-01-01

    Substrate type is a key-factor in nest-site selection and nest architecture of burrowing birds. However, little is known about which factors drive nest-site selection for these species, especially in the tropics. We studied the influence of soil attributes on nest-site selection by the campo miner Geositta poeciloptera, an open grassland bird that builds its nests within soil cavities. For all nests found, we measured the depth of the nest cavity and the resistance of the soil to penetration, and identified the soil horizon in which the nest was located. In soil banks with nests, we collected soil samples for granulometric analysis around each nest cavity, while in soil banks without nests we collected these samples at random points. From 43 nests found, 86% were located in the deeper soil horizons (C-horizon), and only 14% in the shallower horizons (B-horizon). Granulometric analysis showed that the C-horizons possessed a high similar granulometric composition, with high silt and low clay contents. These characteristics are associated with a low degree of structural development of the soil, which makes it easier to excavate. Contrarily, soil resistance to penetration does not seem to be an important criterion for nest site selection, although nests in more resistant the soils tend to have shallower nest cavities. Among the soil banks analyzed, 40% of those without cavities possessed a larger proportion of B-horizon relative to the C-horizon, and their texture was more clayey. On the other hand, almost all soil banks containing nest cavities had a larger C-horizon and a silty texture, indicating that soil attributes drive nest-site selection by G. poeciloptera. Thus, we conclude that the patchy distribution of G. poeciloptera can attributed to the infrequent natural exposure of the C-horizon in the tropical region, where well developed, deep and permeable soils are more common. PMID:29381768

  4. Soil attributes drive nest-site selection by the campo miner Geositta poeciloptera.

    Science.gov (United States)

    Meireles, Ricardo Camargos de; Teixeira, João Paulo Gusmão; Solar, Ricardo; Vasconcelos, Bruno Nery F; Fernandes, Raphael B A; Lopes, Leonardo Esteves

    2018-01-01

    Substrate type is a key-factor in nest-site selection and nest architecture of burrowing birds. However, little is known about which factors drive nest-site selection for these species, especially in the tropics. We studied the influence of soil attributes on nest-site selection by the campo miner Geositta poeciloptera, an open grassland bird that builds its nests within soil cavities. For all nests found, we measured the depth of the nest cavity and the resistance of the soil to penetration, and identified the soil horizon in which the nest was located. In soil banks with nests, we collected soil samples for granulometric analysis around each nest cavity, while in soil banks without nests we collected these samples at random points. From 43 nests found, 86% were located in the deeper soil horizons (C-horizon), and only 14% in the shallower horizons (B-horizon). Granulometric analysis showed that the C-horizons possessed a high similar granulometric composition, with high silt and low clay contents. These characteristics are associated with a low degree of structural development of the soil, which makes it easier to excavate. Contrarily, soil resistance to penetration does not seem to be an important criterion for nest site selection, although nests in more resistant the soils tend to have shallower nest cavities. Among the soil banks analyzed, 40% of those without cavities possessed a larger proportion of B-horizon relative to the C-horizon, and their texture was more clayey. On the other hand, almost all soil banks containing nest cavities had a larger C-horizon and a silty texture, indicating that soil attributes drive nest-site selection by G. poeciloptera. Thus, we conclude that the patchy distribution of G. poeciloptera can attributed to the infrequent natural exposure of the C-horizon in the tropical region, where well developed, deep and permeable soils are more common.

  5. Site selection and characterization processes for deep geologic disposal of high level nuclear waste

    International Nuclear Information System (INIS)

    Costin, L.S.

    1997-01-01

    In this paper, the major elements of the site selection and characterization processes used in the U. S. high level waste program are discussed. While much of the evolution of the site selection and characterization processes have been driven by the unique nature of the U. S. program, these processes, which are well-defined and documented, could be used as an initial basis for developing site screening, selection, and characterization programs in other countries. Thus, this paper focuses more on the process elements than the specific details of the U. S. program. (author). 3 refs., 2 tabs., 5 figs

  6. Site selection and characterization processes for deep geologic disposal of high level nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Costin, L.S. [Sandia National Labs., Albuquerque, NM (United States)

    1997-12-31

    In this paper, the major elements of the site selection and characterization processes used in the U. S. high level waste program are discussed. While much of the evolution of the site selection and characterization processes have been driven by the unique nature of the U. S. program, these processes, which are well-defined and documented, could be used as an initial basis for developing site screening, selection, and characterization programs in other countries. Thus, this paper focuses more on the process elements than the specific details of the U. S. program. (author). 3 refs., 2 tabs., 5 figs.

  7. The Protection of Cultural Heritage Sites from Geo-Hazards

    Science.gov (United States)

    Themistocleous, Kyriacos; Agapiou, Athos; Cuca, Branka; Lysandrou, Vasiliki; Tzouvaras, Marios; Michaelides, Silas; Hadjimitsis, Diofantos; Margottini, Claudio; Cigna, Francesca; Crosta, Giovanni; Fernandez, Jose

    2016-04-01

    Cultural heritage sites are continuously impacted by several environmental and anthropogenic factors, including climate change, precipitation, natural hazards, wars, etc. However, there is limited data available regarding the effects of geo-hazards on cultural heritage sites. This paper presents the methodology of the PROTHEGO project, which uses radar interferometry to monitor surface deformation with mm precision to analyze the impact of geo-hazards in cultural heritage sites in Europe. PROTHEGO will provide a new, low-cost methodological approach for the safe management of cultural heritage monuments and sites located in Europe. The project will apply InSAR techniques to monitor monuments and sites that are potentially unstable due to landslides, sinkholes, settlement, subsidence, active tectonics as well as structural deformation, all of which can be effected of climate change and human interaction. The research methodology will be focused on long-term low-impact monitoring systems as well as indirect analysis of environmental contexts to investigate changes and decay of structure, material and landscape. The methodology will be applied to more than 450 sites on the UNESCO World Heritage List in geographical Europe. One of the case study selected is located in Cyprus at Choirokoitia, which is a UNESCO World Heritage site. The outcomes of PROTHEGO will support correct planning and rebalancing the contrast between endogenous (structural and materials decay, the societal development, the anthropogenic pressure) and surrounding exogenous forces (natural hazards acting on the heritage) which affecting the European cultural heritage.

  8. Identification of Site Selection Factors in the U.S. Franchise Restaurant Industry: An Exploratory Study

    OpenAIRE

    Park, Kunsoon

    2002-01-01

    The purpose of this study was to identify and rank the importance of the site selection factors that influence the U.S. franchise restaurant industry as well as rank the confidence level of the experts. To identify the site selection factors, this study sought assistance and support from restaurant professionals. The Delphi technique was used to elicit the opinions of a panel of experts regarding the site selection factors. The panel was composed of restaurant professionals of restaurant c...

  9. Attribute Based Selection of Thermoplastic Resin for Vacuum Infusion Process: A Decision Making Methodology

    DEFF Research Database (Denmark)

    Raghavalu Thirumalai, Durai Prabhakaran; Lystrup, Aage; Løgstrup Andersen, Tom

    2012-01-01

    The composite industry looks toward a new material system (resins) based on thermoplastic polymers for the vacuum infusion process, similar to the infusion process using thermosetting polymers. A large number of thermoplastics are available in the market with a variety of properties suitable...... be beneficial. In this paper, the authors introduce a new decision making tool for resin selection based on significant attributes. This article provides a broad overview of suitable thermoplastic material systems for vacuum infusion process available in today’s market. An illustrative example—resin selection...... for vacuum infused of a wind turbine blade—is shown to demonstrate the intricacies involved in the proposed methodology for resin selection....

  10. Landscape Forsmark - data, methodology and results for SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.; Svensk Kaernbraenslehantering AB (Sweden)

    2010-12-15

    This report presents an integrated description of the landscape at the Forsmark site during the succession from present conditions to the far future. It was produced as a part of the biosphere modelling within the SR-Site safety assessment. The report gives a description of input data, methodology and resulting models used to support the current understanding of the landscape used in SR-Site. It is intended to describe the properties and conditions at the site and to give information essential for demonstrating understanding. The report relies heavily on a number of discipline-specific background reports concerning details of the data analyses and modelling. Long-term landscape development in the Forsmark area is dependent on two main and partly interdependent factors, i.e. climate variations and shoreline displacement. These two factors in combination strongly affect a number of processes, which in turn determine the development of ecosystems. Some examples of such processes are erosion and sedimentation, groundwater recharge and discharge, soil formation, primary production and decomposition of organic matter. The biosphere at the site during the next 1,000 years is assumed to be quite similar to the present situation. The most important changes are the natural infilling of lakes and a slight withdrawal of the sea with its effects on the near-shore areas and the shallow coastal basins. The climate during the rest of the temperate period may vary considerably, with both warmer and colder periods. The main effect of temperature changes will be on the vegetation period. Changed temperatures may give rise to drier or wetter climate and to changed snow cover and frost characteristics, and this can in turn affect the dominant vegetation and mire build-up. The description of the Forsmark ecosystem succession during a glacial cycle is one of the main features of the SR-Site biosphere modelling. The future areas potentially affected by deep groundwater discharge are

  11. Landscape Forsmark - data, methodology and results for SR-Site

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2010-12-01

    This report presents an integrated description of the landscape at the Forsmark site during the succession from present conditions to the far future. It was produced as a part of the biosphere modelling within the SR-Site safety assessment. The report gives a description of input data, methodology and resulting models used to support the current understanding of the landscape used in SR-Site. It is intended to describe the properties and conditions at the site and to give information essential for demonstrating understanding. The report relies heavily on a number of discipline-specific background reports concerning details of the data analyses and modelling. Long-term landscape development in the Forsmark area is dependent on two main and partly interdependent factors, i.e. climate variations and shoreline displacement. These two factors in combination strongly affect a number of processes, which in turn determine the development of ecosystems. Some examples of such processes are erosion and sedimentation, groundwater recharge and discharge, soil formation, primary production and decomposition of organic matter. The biosphere at the site during the next 1,000 years is assumed to be quite similar to the present situation. The most important changes are the natural infilling of lakes and a slight withdrawal of the sea with its effects on the near-shore areas and the shallow coastal basins. The climate during the rest of the temperate period may vary considerably, with both warmer and colder periods. The main effect of temperature changes will be on the vegetation period. Changed temperatures may give rise to drier or wetter climate and to changed snow cover and frost characteristics, and this can in turn affect the dominant vegetation and mire build-up. The description of the Forsmark ecosystem succession during a glacial cycle is one of the main features of the SR-Site biosphere modelling. The future areas potentially affected by deep groundwater discharge are

  12. Safety class methodology

    International Nuclear Information System (INIS)

    Donner, E.B.; Low, J.M.; Lux, C.R.

    1992-01-01

    DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

  13. National radioactive waste repository site selection study. Phase 2. A report on public comment

    International Nuclear Information System (INIS)

    1995-11-01

    Agreement was reached in principle between State/Territory and the Commonwealth of Australia Governments that a suitable site for a radioactive wastes repository must be found. The discussion papers resulting from the Phase 1 and Phase 2 of the site selection study were released for public comment. The national repository will be for disposal of low level and short-lived intermediate level radioactive wastes streaming from the medical, research and industrial use of radioisotopes in Australia. The purpose of this report is to summarise and respond in general terms to comment received on the discussion paper -Phase 2 of the study. Forty five submissions were received. Of these: 18 supported the Phase 2 study approach and the concept of a national repository; 13 did not state a clear position but either requested more information or provided constructive comment on the siting process; 7 supported the site selection approach and the repository concept but suggested that the repository should not be sited in a particular area; 3 opposed the siting of the repository in their vicinity but not necessarily the repository concept and site selection approach; 4 opposed the concept of a national repository. This compares with 124 submissions on Phase 1 of the study, of which 57 opposed the national repository concept (52 of these were from letters elicited by Greenpeace) and 48 supported the establishment of a national repository and the site selection approach proposed. 3 figs

  14. Methodologies for evaluating long-term stabilization designs of uranium mill tailings impoundments

    International Nuclear Information System (INIS)

    Nelson, J.D.; Abt, S.R.; Volpe, R.L.; Van Zye, D.; Hinkle, N.E.; Staub, W.P.

    1986-06-01

    Uranium mill tailings impoundments require long-term (200 to 1000 years) stabilization. This report reviews currently available methodologies for evaluating factors that can have a significant influence on tailings stabilization and develops methodologies in technical areas where none presently exist. Mill operators can use these methodologies to assist with (1) the selection of sites for mill tailings impoundments, (2) the design of stable impoundments, and (3) the development of reclamation plans for existing impoundments. These methodologies would also be useful for regulatory agency evaluations of proposals in permit or license applications. Methodologies were reviewed or developed in the following technical areas: (1) prediction of the Probable Maximum Precipitation (PMP) and an accompanying Probable Maximum Flood (PMF); (2) prediction of the stability of local and regional fluvial systems; (3) design of impoundment surfaces resistant to gully erosion; (4) evaluation of the potential for surface sheet erosion; (5) design of riprap for protecting embankments from channel flood flow and overland flow; (6) selection of riprap with appropriate durability for its intended use; and (7) evaluation of oversizing required for marginal quality riprap

  15. DECISION SUPPORT CONCEPT TO MANAGEMENT OF CONSTRUCTION PROJECTS - PROBLEM OF CONSTRUCTION SITE SELECTION

    Directory of Open Access Journals (Sweden)

    Nikša Jajac

    2013-02-01

    Full Text Available The aim of this paper is to present Decision Support Concept (DSC for management of construction projects. Focus of our research is in application of multicritera methods (MCM to decision making in planning phase of construction projects (related to the problem of construction sites selection. The problem is identified as a significant one from many different aspects such as economic aspect, civil engineering aspect, etc. what indicates the necessity for evaluation of multiple sites by several different criteria. Therefore, DSC for construction site selection based on PROMETHEE method is designed. In order to define the appropriate criteria, their weights and preference functions for the concept, three groups of stakeholders are involved (investors, construction experts and experts for real estate market in its design. AHP method has been used for determination of criteria weights. The model has been tested on the problem of site selection for construction of residential-commercial building in four largest cities in Croatia.

  16. Identification of suitable sites for rainwater harvesting structures in arid and semi-arid regions: A review

    Directory of Open Access Journals (Sweden)

    Ammar Adham

    2016-06-01

    Full Text Available Harvested rainwater is an alternative source of water in arid and semi-arid regions (ASARs around the world. Many researchers have developed and applied various methodologies and criteria to identify suitable sites and techniques for rainwater harvesting (RWH. Determining the best method or guidelines for site selection, however, is difficult. The main objective of this study was to define a general method for selecting suitable RWH sites in ASARs by assembling an inventory of the main methods and criteria developed during the last three decades. We categorised and compared four main methodologies of site selection from 48 studies published in scientific journals, reports of international organisations, or sources of information obtained from practitioners. We then identified three main sets of criteria for selecting RWH locations and the main characteristics of the most common RWH techniques used in ASARs. The methods were diverse, ranging from those based only on biophysical criteria to more integrated approaches including socio-economic criteria, especially after 2000. The most important criteria for the selection of suitable sites for RWH were slope, land use/cover, soil type, rainfall, distance to settlements/streams, and cost. The success rate of RWH projects tended to increase when these criteria were considered, but an objective evaluation of these selection methods is still lacking. Most studies now select RHW sites using geographic information systems in combination with hydrological models and multi-criteria analysis.

  17. Marine Hydrokinetic Energy Site Identification and Ranking Methodology Part II: Tidal Energy

    Energy Technology Data Exchange (ETDEWEB)

    Kilcher, Levi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tinnesand, Heidi [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-10-01

    Marine hydrokinetic energy is a promising and growing piece of the renewable energy sector that offers high predictability and additional energy sources for a diversified energy economy. This report investigates the market opportunities for tidal energy along the U.S. coastlines. It is part one of a two-part investigation into the United States' two largest marine hydrokinetic resources (wave and tidal). Tidal energy technology is still an emerging form of renewable energy for which large-scale grid-connected project costs are currently poorly defined. Ideally, device designers would like to know the resource conditions at economical project sites so they can optimize device designs. On the other hand, project developers need detailed device cost data to identify sites where projects are economical. That is, device design and siting are, to some extent, a coupled problem. This work describes a methodology for identifying likely deployment locations based on a set of criteria that tidal energy experts in industry, academia, and national laboratories agree are likely to be important factors for all technology types. Several factors that will affect tidal project costs and siting have not been considered here -- including permitting constraints, conflicting use, seasonal resource variability, extreme event likelihood, and distance to ports -- because consistent data are unavailable or technology-independent scoring could not be identified. As the industry continues to mature and converge around a subset of device archetypes with well-defined costs, more precise investigations of project siting that include these factors will be possible. For now, these results provide a high-level guide pointing to the regions where markets and resource will one day support commercial tidal energy projects.

  18. Instructions for the use of the methodological tools applicable to polluted sites and soils; Mode d'emploi des outils methodologiques applicables aux sites et sols pollues

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The French policy in the domain of polluted sites and soils is based on a limited number of principles which are: the prevention of future pollutions, the identification of all possible potential risks, a well-suited treatment process which depends on the effective environmental impact and on the intended use of the site. This document aims at identifying the main questions raised by a given situation. It proposed useful methodological tools for the construction of answers to the problems encountered: 1 - general approach (main guidelines for the different steps of the management of a polluted site, different possible approaches); 2 - examples of application (industrial site in use, closing down of an industrial site, accidental situation (recent pollution), fortuitous discovery of a pollution on a site, pollutions with limited surface extension, site involved in a land transaction, polluted site with a sensible use, industrial waste lands). (J.S.)

  19. Selection of nest-site habitat by interior least terns in relation to sandbar construction

    Science.gov (United States)

    Sherfy, Mark H.; Stucker, Jennifer H.; Buhl, Deborah A.

    2012-01-01

    Federally endangered interior least terns (Sternula antillarum) nest on bare or sparsely vegetated sandbars on midcontinent river systems. Loss of nesting habitat has been implicated as a cause of population declines, and managing these habitats is a major initiative in population recovery. One such initiative involves construction of mid-channel sandbars on the Missouri River, where natural sandbar habitat has declined in quantity and quality since the late 1990s. We evaluated nest-site habitat selection by least terns on constructed and natural sandbars by comparing vegetation, substrate, and debris variables at nest sites (n = 798) and random points (n = 1,113) in bare or sparsely vegetated habitats. Our logistic regression models revealed that a broader suite of habitat features was important in nest-site selection on constructed than on natural sandbars. Odds ratios for habitat variables indicated that avoidance of habitat features was the dominant nest-site selection process on both sandbar types, with nesting terns being attracted to nest-site habitat features (gravel and debris) and avoiding vegetation only on constructed sandbars, and avoiding silt and leaf litter on both sandbar types. Despite the seemingly uniform nature of these habitats, our results suggest that a complex suite of habitat features influences nest-site choice by least terns. However, nest-site selection in this social, colonially nesting species may be influenced by other factors, including spatial arrangement of bare sand habitat, proximity to other least terns, and prior habitat occupancy by piping plovers (Charadrius melodus). We found that nest-site selection was sensitive to subtle variation in habitat features, suggesting that rigor in maintaining habitat condition will be necessary in managing sandbars for the benefit of least terns. Further, management strategies that reduce habitat features that are avoided by least terns may be the most beneficial to nesting least terns.

  20. A Negative Selection Immune System Inspired Methodology for Fault Diagnosis of Wind Turbines.

    Science.gov (United States)

    Alizadeh, Esmaeil; Meskin, Nader; Khorasani, Khashayar

    2017-11-01

    High operational and maintenance costs represent as major economic constraints in the wind turbine (WT) industry. These concerns have made investigation into fault diagnosis of WT systems an extremely important and active area of research. In this paper, an immune system (IS) inspired methodology for performing fault detection and isolation (FDI) of a WT system is proposed and developed. The proposed scheme is based on a self nonself discrimination paradigm of a biological IS. Specifically, the negative selection mechanism [negative selection algorithm (NSA)] of the human body is utilized. In this paper, a hierarchical bank of NSAs are designed to detect and isolate both individual as well as simultaneously occurring faults common to the WTs. A smoothing moving window filter is then utilized to further improve the reliability and performance of the FDI scheme. Moreover, the performance of our proposed scheme is compared with another state-of-the-art data-driven technique, namely the support vector machines (SVMs) to demonstrate and illustrate the superiority and advantages of our proposed NSA-based FDI scheme. Finally, a nonparametric statistical comparison test is implemented to evaluate our proposed methodology with that of the SVM under various fault severities.

  1. Structured methodology review identified seven (RETREAT) criteria for selecting qualitative evidence synthesis approaches.

    Science.gov (United States)

    Booth, Andrew; Noyes, Jane; Flemming, Kate; Gerhardus, Ansgar; Wahlster, Philip; van der Wilt, Gert Jan; Mozygemba, Kati; Refolo, Pietro; Sacchini, Dario; Tummers, Marcia; Rehfuess, Eva

    2018-07-01

    To compare and contrast different methods of qualitative evidence synthesis (QES) against criteria identified from the literature and to map their attributes to inform selection of the most appropriate QES method to answer research questions addressed by qualitative research. Electronic databases, citation searching, and a study register were used to identify studies reporting QES methods. Attributes compiled from 26 methodological papers (2001-2014) were used as a framework for data extraction. Data were extracted into summary tables by one reviewer and then considered within the author team. We identified seven considerations determining choice of methods from the methodological literature, encapsulated within the mnemonic Review question-Epistemology-Time/Timescale-Resources-Expertise-Audience and purpose-Type of data. We mapped 15 different published QES methods against these seven criteria. The final framework focuses on stand-alone QES methods but may also hold potential when integrating quantitative and qualitative data. These findings offer a contemporary perspective as a conceptual basis for future empirical investigation of the advantages and disadvantages of different methods of QES. It is hoped that this will inform appropriate selection of QES approaches. Copyright © 2018 Elsevier Inc. All rights reserved.

  2. 40 CFR 228.6 - Specific criteria for site selection.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Specific criteria for site selection. 228.6 Section 228.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN..., nursery, feeding, or passage areas of living resources in adult or -juvenile phases; (3) Location in...

  3. Hydrologic evaluation methodology for estimating water movement through the unsaturated zone at commercial low-level radioactive waste disposal sites

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, P.D.; Rockhold, M.L.; Nichols, W.E.; Gee, G.W. [Pacific Northwest Lab., Richland, WA (United States)

    1996-01-01

    This report identifies key technical issues related to hydrologic assessment of water flow in the unsaturated zone at low-level radioactive waste (LLW) disposal facilities. In addition, a methodology for incorporating these issues in the performance assessment of proposed LLW disposal facilities is identified and evaluated. The issues discussed fall into four areas: estimating the water balance at a site (i.e., infiltration, runoff, water storage, evapotranspiration, and recharge); analyzing the hydrologic performance of engineered components of a facility; evaluating the application of models to the prediction of facility performance; and estimating the uncertainty in predicted facility performance. To illustrate the application of the methodology, two examples are presented. The first example is of a below ground vault located in a humid environment. The second example looks at a shallow land burial facility located in an arid environment. The examples utilize actual site-specific data and realistic facility designs. The two examples illustrate the issues unique to humid and arid sites as well as the issues common to all LLW sites. Strategies for addressing the analytical difficulties arising in any complex hydrologic evaluation of the unsaturated zone are demonstrated.

  4. Hydrologic evaluation methodology for estimating water movement through the unsaturated zone at commercial low-level radioactive waste disposal sites

    International Nuclear Information System (INIS)

    Meyer, P.D.; Rockhold, M.L.; Nichols, W.E.; Gee, G.W.

    1996-01-01

    This report identifies key technical issues related to hydrologic assessment of water flow in the unsaturated zone at low-level radioactive waste (LLW) disposal facilities. In addition, a methodology for incorporating these issues in the performance assessment of proposed LLW disposal facilities is identified and evaluated. The issues discussed fall into four areas: estimating the water balance at a site (i.e., infiltration, runoff, water storage, evapotranspiration, and recharge); analyzing the hydrologic performance of engineered components of a facility; evaluating the application of models to the prediction of facility performance; and estimating the uncertainty in predicted facility performance. To illustrate the application of the methodology, two examples are presented. The first example is of a below ground vault located in a humid environment. The second example looks at a shallow land burial facility located in an arid environment. The examples utilize actual site-specific data and realistic facility designs. The two examples illustrate the issues unique to humid and arid sites as well as the issues common to all LLW sites. Strategies for addressing the analytical difficulties arising in any complex hydrologic evaluation of the unsaturated zone are demonstrated

  5. The alternative site selection procedure as covered in the report by the Repository Site Selection Procedures Working Group; Das Verfahren der alternativen Standortsuche im Bericht des Arbeitskreises Auswahlverfahren Endlagerstandorte

    Energy Technology Data Exchange (ETDEWEB)

    Brenner, M. [Jena Univ. (Germany). Juristische Fakultaet

    2005-01-01

    The 2002 Act on the Regulated Termination of the Use of Nuclear Power for Industrial Electricity Generation declared Germany's opting out of the peaceful uses of nuclear power. The problem of the permanent management of radioactive residues is becoming more and more important also in the light of that political decision. At the present time, there are no repositories offering the waste management capacities required. Such facilities need to be created. At the present stage, eligible repository sites are the Konrad mine, a former iron ore mine near Salzgitter, and the Gorleben salt dome. While the fate of the Konrad mine as a repository for waste generating negligible amounts of heat continues to be uncertain, despite a plan approval decision of June 2002, the Gorleben repository is still in the planning phase, at present in a dormant state, so to speak. The federal government expressed doubt about the suitability of the Gorleben site. Against this backdrop, the Federal Ministry for the Environment, Nature Conservation, and Nuclear Safety in February 1999 established AkEnd, the Working Group on Repository Site Selection Procedures. The Group was charged with developing, based on sound scientific criteria, a transparent site selection procedure in order to facilitate the search for repository sites. The Working Group presented its final report in December 2002 after approximately four years of work. The Group's proposals about alternative site selection procedures are explained in detail and, above all, reviewed critically. (orig.)

  6. Simulation Experiment on Landing Site Selection Using a Simple Geometric Approach

    Science.gov (United States)

    Zhao, W.; Tong, X.; Xie, H.; Jin, Y.; Liu, S.; Wu, D.; Liu, X.; Guo, L.; Zhou, Q.

    2017-07-01

    Safe landing is an important part of the planetary exploration mission. Even fine scale terrain hazards (such as rocks, small craters, steep slopes, which would not be accurately detected from orbital reconnaissance) could also pose a serious risk on planetary lander or rover and scientific instruments on-board it. In this paper, a simple geometric approach on planetary landing hazard detection and safe landing site selection is proposed. In order to achieve full implementation of this algorithm, two easy-to-compute metrics are presented for extracting the terrain slope and roughness information. Unlike conventional methods which must do the robust plane fitting and elevation interpolation for DEM generation, in this work, hazards is identified through the processing directly on LiDAR point cloud. For safe landing site selection, a Generalized Voronoi Diagram is constructed. Based on the idea of maximum empty circle, the safest landing site can be determined. In this algorithm, hazards are treated as general polygons, without special simplification (e.g. regarding hazards as discrete circles or ellipses). So using the aforementioned method to process hazards is more conforming to the real planetary exploration scenario. For validating the approach mentioned above, a simulated planetary terrain model was constructed using volcanic ash with rocks in indoor environment. A commercial laser scanner mounted on a rail was used to scan the terrain surface at different hanging positions. The results demonstrate that fairly hazard detection capability and reasonable site selection was obtained compared with conventional method, yet less computational time and less memory usage was consumed. Hence, it is a feasible candidate approach for future precision landing selection on planetary surface.

  7. SIMULATION EXPERIMENT ON LANDING SITE SELECTION USING A SIMPLE GEOMETRIC APPROACH

    Directory of Open Access Journals (Sweden)

    W. Zhao

    2017-07-01

    Full Text Available Safe landing is an important part of the planetary exploration mission. Even fine scale terrain hazards (such as rocks, small craters, steep slopes, which would not be accurately detected from orbital reconnaissance could also pose a serious risk on planetary lander or rover and scientific instruments on-board it. In this paper, a simple geometric approach on planetary landing hazard detection and safe landing site selection is proposed. In order to achieve full implementation of this algorithm, two easy-to-compute metrics are presented for extracting the terrain slope and roughness information. Unlike conventional methods which must do the robust plane fitting and elevation interpolation for DEM generation, in this work, hazards is identified through the processing directly on LiDAR point cloud. For safe landing site selection, a Generalized Voronoi Diagram is constructed. Based on the idea of maximum empty circle, the safest landing site can be determined. In this algorithm, hazards are treated as general polygons, without special simplification (e.g. regarding hazards as discrete circles or ellipses. So using the aforementioned method to process hazards is more conforming to the real planetary exploration scenario. For validating the approach mentioned above, a simulated planetary terrain model was constructed using volcanic ash with rocks in indoor environment. A commercial laser scanner mounted on a rail was used to scan the terrain surface at different hanging positions. The results demonstrate that fairly hazard detection capability and reasonable site selection was obtained compared with conventional method, yet less computational time and less memory usage was consumed. Hence, it is a feasible candidate approach for future precision landing selection on planetary surface.

  8. Oviposition Site Selection by the Dengue Vector Aedes aegypti and Its Implications for Dengue Control

    Science.gov (United States)

    Wong, Jacklyn; Stoddard, Steven T.; Astete, Helvio; Morrison, Amy C.; Scott, Thomas W.

    2011-01-01

    Background Because no dengue vaccine or antiviral therapy is commercially available, controlling the primary mosquito vector, Aedes aegypti, is currently the only means to prevent dengue outbreaks. Traditional models of Ae. aegypti assume that population dynamics are regulated by density-dependent larval competition for food and little affected by oviposition behavior. Due to direct impacts on offspring survival and development, however, mosquito choice in oviposition site can have important consequences for population regulation that should be taken into account when designing vector control programs. Methodology/Principal Findings We examined oviposition patterns by Ae. aegypti among 591 naturally occurring containers and a set of experimental containers in Iquitos, Peru. Using larval starvation bioassays as an indirect measure of container food content, we assessed whether females select containers with the most food for their offspring. Our data indicate that choice of egg-laying site is influenced by conspecific larvae and pupae, container fill method, container size, lid, and sun exposure. Although larval food positively influenced oviposition, our results did not support the hypothesis that females act primarily to maximize food for larvae. Females were most strongly attracted to sites containing immature conspecifics, even when potential competitors for their progeny were present in abundance. Conclusion/Significance Due to strong conspecific attraction, egg-laying behavior may contribute more to regulating Ae. aegypti populations than previously thought. If highly infested containers are targeted for removal or larvicide application, females that would have preferentially oviposited in those sites may instead distribute their eggs among other suitable, previously unoccupied containers. Strategies that kill mosquitoes late in their development (i.e., insect growth regulators that kill pupae rather than larvae) will enhance vector control by creating

  9. Integrated account of method, site selection and programme prior to the site investigation phase

    International Nuclear Information System (INIS)

    2000-12-01

    applications and have these applications reviewed by the appropriate authorities. An analysis of conceivable alternatives for managing and disposing of spent nuclear fuel has confirmed that deep geological disposal according to the KBS-3 method has the best prospects of meeting all requirements. The alternative of putting off a decision until some future time (the zero alternative) does not appear tenable. The assessment of long-term safety shows that the prospects of building a safe deep repository in the Swedish bedrock are good. Independent Swedish and international review of the safety assessment confirm that the body of data in this respect is adequate for the siting process to proceed to the site investigation phase. A fuller summary is given below of the account given in this report of method as well as site selection and programme for the site investigation phase. The point of departure for the account is the review comments made by the regulatory authorities and the Government's decision regarding RD and D-Programme 98. In its decision, the Government stipulated conditions for SKB's continued research and development programme. The analysis of alternative system designs was to be supplemented, mainly with regard to the zero alternative and very deep boreholes. Furthermore, the Government decided that SKB shall submit an integrated evaluation of completed feasibility studies and other background material for selection of sites for site investigations and present a clear programme for site investigations

  10. A game-theoretical model for selecting a site of non-preferred waste facilities

    International Nuclear Information System (INIS)

    Kim, Seong Ho; Kim, Tae Woon

    2006-01-01

    In the present work, a game-theoretic model (GTM) as a tool of conflict analysis is proposed for multiplayer multicriteria decision-making problems in a conflict situation. The developed GTM is used for obtaining the most possible resolutions in the conflict among multiple decision makers. The GTM is based on directed graph structure and solution concepts. To demonstrate the performance of the GTM, using a numerical example, the GTM is applied to an environmental conflict problem, especially a non-preferred waste disposal siting conflict available in the literature. It is found that with GTM the states in equilibrium can be recognized. The conflict under consideration is to select a site of non-preferred waste facilities. The government is to choose a site of installation for users of a toxic waste disposal facility. A certain time-point of interest is a period of time to select one of candidate sites that completely meet regular criteria of governmental body in charge of permitting a facility site. The facility siting conflict among multiple players (i.e., decision-makers, DMs) of concern is viewed as a multiple player-multiple criteria (MPMC) domain. For instance, three possible sites (i.e., site A, site B, and site C) to be selected by multiple players are characterized by the building cost, accessibility, and proximity to the residential area. Concerning the site A, the installation of a facility is not expensive, the accessible to a facility is easy, and the site A is located very near a residential area. Concerning site B, the facility is expensive to build, the facility is easily accessible, and the site is located near the residential area. Concerning site C, the installation cost is expensive, the accessibility is difficult, and the location of site is far from the residential area. In simple models, three main groups of players could be considered to be the government, users, and local residents. The government is to play a role as one of proponents or

  11. Multicriteria renewable energy planning using an integrated fuzzy VIKOR and AHP methodology: The case of Istanbul

    International Nuclear Information System (INIS)

    Kaya, Tolga; Kahraman, Cengiz

    2010-01-01

    The purpose of this study is twofold: first, it is aimed at determining the best renewable energy alternative for Istanbul by using an integrated VIKOR-AHP methodology. Second, a selection among alternative energy production sites in this city is made using the same approach. In the proposed VIKOR-AHP methodology, the weights of the selection criteria are determined by pairwise comparison matrices of AHP. In energy decision making problems, the judgments of decision makers are usually vague. As it is relatively difficult for decision makers to provide exact values for the criteria, the evaluation data for the alternative energy policies should be expressed in linguistic terms. In order to model this kind of uncertainty in human preferences, fuzzy logic is applied very successfully. Thus, both classical VIKOR and classical AHP procedures are performed under fuzzy environment. The originality of the paper comes from the application of the proposed integrated VIKOR-AHP methodology to the selection of the best energy policy and production site. It is found that wind energy is the most appropriate renewable energy option and Catalca district is the best area among the alternatives for establishing wind turbines in Istanbul.

  12. New Methodology for a Comprehensive Modular Safety Control System in a Cyclotron Site

    International Nuclear Information System (INIS)

    Kaufman, Y.; Kravitz, M.; Arad, M.; Osovizky, A.; Paran, J.; Sarussi, B.; Ellenbogen, M.; Tal, N.

    2004-01-01

    This Paper describes a new methodology for a comprehensive modular Safety Control System (SCS), for a cyclotron site. The developed SCS is a modular approach for controlling the production procedures, safety conditions and documentation aspects in the Cyclotron site. Usually, the safety conditions in cyclotron sites are maintained by a variety of sensors. The cyclotron is supplied from the manufacturer with a self-integrated control system for its operation, yet the comprehensive SCS has to be defined and setup by the customer. Therefore, customers face a lot of integration problems in trying to combine all the signals from the different safety systems such as radiation monitoring, environmental and access control, in order to maintain proper safety working conditions. The presented SCS design provides main user interface and the complete safety solution required by including preset control logic definitions and open logic for specific user applications. The knowledge for the preset control logic definitions was gathered in previous projects. Failure Mode and Effects Analysis (FMEA) method has been implemented on the SCS to analyze the potential failure modes and their impact on the product reliability

  13. Report on the Survey on Regulation of Site Selection and Preparation

    International Nuclear Information System (INIS)

    Webster, Philip

    2010-01-01

    At its first meeting in May 2008, the Working Group discussed a task to 'Prepare a report reviewing the various practices used by regulators in the regulation of nuclear power plant siting. The report should consider regulator practices on sites where a mixture of activities are taking place (e.g. operating units, new construction, decommissioning, etc) including organization of the regulators organisation, methods, systems, etc.'. Following discussion, the Working Group assigned an Action 1-5 to 'develop a survey on the regulation of nuclear sites including seismicity issues, security issues, multi-units aspects and regulator practices on sites where a mixture of activities are taking place (e.g. operating units, new construction, decommissioning, etc.)'. The Survey was prepared and issued by the NEA in July 2008 with a request to the member states to provide their responses by the next meeting of the Working Group in October 2008. In addition to addressing the specific topics actioned by the Working Group, the Survey also investigated the broader context of siting, in order to address the Mandate that had been approved by the CNRA. The questions in the survey therefore covered the topics of site evaluation, site selection, regulatory approval, site preparation and regulatory oversight. A topic of particular interest was to what extent IAEA guidance on site evaluation was followed. The survey considered the possibility that a body other than the safety regulator may approve the choice of site or permit the applicant to start to prepare it. The survey also investigated the existence of formal requirements and informal expectations, recognizing that these both form part of the regulatory tool-kit. Responses were received from all twelve member states that were then members of the Working Group. The responses were reviewed at the second meeting of the Working Group in October 2008. In general, it could be stated that new reactors are licensed in

  14. Evaluation and selection of indicators for land degradation and desertification monitoring: methodological approach.

    Science.gov (United States)

    Kosmas, C; Kairis, Or; Karavitis, Ch; Ritsema, C; Salvati, L; Acikalin, S; Alcala, M; Alfama, P; Atlhopheng, J; Barrera, J; Belgacem, A; Solé-Benet, A; Brito, J; Chaker, M; Chanda, R; Coelho, C; Darkoh, M; Diamantis, I; Ermolaeva, O; Fassouli, V; Fei, W; Feng, J; Fernandez, F; Ferreira, A; Gokceoglu, C; Gonzalez, D; Gungor, H; Hessel, R; Juying, J; Khatteli, H; Khitrov, N; Kounalaki, A; Laouina, A; Lollino, P; Lopes, M; Magole, L; Medina, L; Mendoza, M; Morais, P; Mulale, K; Ocakoglu, F; Ouessar, M; Ovalle, C; Perez, C; Perkins, J; Pliakas, F; Polemio, M; Pozo, A; Prat, C; Qinke, Y; Ramos, A; Ramos, J; Riquelme, J; Romanenkov, V; Rui, L; Santaloia, F; Sebego, R; Sghaier, M; Silva, N; Sizemskaya, M; Soares, J; Sonmez, H; Taamallah, H; Tezcan, L; Torri, D; Ungaro, F; Valente, S; de Vente, J; Zagal, E; Zeiliguer, A; Zhonging, W; Ziogas, A

    2014-11-01

    An approach to derive relationships for defining land degradation and desertification risk and developing appropriate tools for assessing the effectiveness of the various land management practices using indicators is presented in the present paper. In order to investigate which indicators are most effective in assessing the level of desertification risk, a total of 70 candidate indicators was selected providing information for the biophysical environment, socio-economic conditions, and land management characteristics. The indicators were defined in 1,672 field sites located in 17 study areas in the Mediterranean region, Eastern Europe, Latin America, Africa, and Asia. Based on an existing geo-referenced database, classes were designated for each indicator and a sensitivity score to desertification was assigned to each class based on existing research. The obtained data were analyzed for the various processes of land degradation at farm level. The derived methodology was assessed using independent indicators, such as the measured soil erosion rate, and the organic matter content of the soil. Based on regression analyses, the collected indicator set can be reduced to a number of effective indicators ranging from 8 to 17 in the various processes of land degradation. Among the most important indicators identified as affecting land degradation and desertification risk were rain seasonality, slope gradient, plant cover, rate of land abandonment, land-use intensity, and the level of policy implementation.

  15. High resolution x-ray fluorescence spectroscopy - a new technique for site- and spin-selectivity

    International Nuclear Information System (INIS)

    Wang, Xin

    1996-12-01

    X-ray spectroscopy has long been used to elucidate electronic and structural information of molecules. One of the weaknesses of x-ray absorption is its sensitivity to all of the atoms of a particular element in a sample. Through out this thesis, a new technique for enhancing the site- and spin-selectivity of the x-ray absorption has been developed. By high resolution fluorescence detection, the chemical sensitivity of K emission spectra can be used to identify oxidation and spin states; it can also be used to facilitate site-selective X-ray Absorption Near Edge Structure (XANES) and site-selective Extended X-ray Absorption Fine Structure (EXAFS). The spin polarization in K fluorescence could be used to generate spin selective XANES or spin-polarized EXAFS, which provides a new measure of the spin density, or the nature of magnetic neighboring atoms. Finally, dramatic line-sharpening effects by the combination of absorption and emission processes allow observation of structure that is normally unobservable. All these unique characters can enormously simplify a complex x-ray spectrum. Applications of this novel technique have generated information from various transition-metal model compounds to metalloproteins. The absorption and emission spectra by high resolution fluorescence detection are interdependent. The ligand field multiplet model has been used for the analysis of Kα and Kβ emission spectra. First demonstration on different chemical states of Fe compounds has shown the applicability of site selectivity and spin polarization. Different interatomic distances of the same element in different chemical forms have been detected using site-selective EXAFS

  16. Targeting hunter distribution based on host resource selection and kill sites to manage disease risk.

    Science.gov (United States)

    Dugal, Cherie J; van Beest, Floris M; Vander Wal, Eric; Brook, Ryan K

    2013-10-01

    Endemic and emerging diseases are rarely uniform in their spatial distribution or prevalence among cohorts of wildlife. Spatial models that quantify risk-driven differences in resource selection and hunter mortality of animals at fine spatial scales can assist disease management by identifying high-risk areas and individuals. We used resource selection functions (RSFs) and selection ratios (SRs) to quantify sex- and age-specific resource selection patterns of collared (n = 67) and hunter-killed (n = 796) nonmigratory elk (Cervus canadensis manitobensis) during the hunting season between 2002 and 2012, in southwestern Manitoba, Canada. Distance to protected area was the most important covariate influencing resource selection and hunter-kill sites of elk (AICw = 1.00). Collared adult males (which are most likely to be infected with bovine tuberculosis (Mycobacterium bovis) and chronic wasting disease) rarely selected for sites outside of parks during the hunting season in contrast to adult females and juvenile males. The RSFs showed selection by adult females and juvenile males to be negatively associated with landscape-level forest cover, high road density, and water cover, whereas hunter-kill sites of these cohorts were positively associated with landscape-level forest cover and increasing distance to streams and negatively associated with high road density. Local-level forest was positively associated with collared animal locations and hunter-kill sites; however, selection was stronger for collared juvenile males and hunter-killed adult females. In instances where disease infects a metapopulation and eradication is infeasible, a principle goal of management is to limit the spread of disease among infected animals. We map high-risk areas that are regularly used by potentially infectious hosts but currently underrepresented in the distribution of kill sites. We present a novel application of widely available data to target hunter distribution based on host resource

  17. Application of geographical information system in disposal site selection for hazardous wastes.

    Science.gov (United States)

    Rezaeimahmoudi, Mehdi; Esmaeli, Abdolreza; Gharegozlu, Alireza; Shabanian, Hassan; Rokni, Ladan

    2014-01-01

    The aim of this study was to provide a scientific method based on Geographical Information System (GIS) regarding all sustainable development measures to locate a proper landfill for disposal of hazardous wastes, especially industrial (radioactive) wastes. Seven effective factors for determining hazardous waste landfill were applied in Qom Province, central Iran. These criteria included water, slope, population centers, roads, fault, protected areas and geology. The Analysis Hierarchical Process (AHP) model based on pair comparison was used. First, the weight of each factor was determined by experts; afterwards each layer of maps entered to ARC GIS and with special weight multiplied together, finally the best suitable site was introduced. The most suitable sites for burial were in northwest and west of Qom Province and eventually five zones were introduced as the sample sites. GIs and AHP model is introduced as the technical, useful and accelerator tool for disposal site selection. Furthermore it is determined that geological factor is the most effective layer for site selection. It is suggested that geological conditions should be considered primarily then other factors are taken into consideration.

  18. Risk evaluation of remedial alternatives for the Hanford Site

    International Nuclear Information System (INIS)

    Clark, S.W.; Lane, N.K.; Swenson, L.

    1994-01-01

    Risk assessment is one of the many tools used to evaluate and select remedial alternatives and evaluate the risk associated with selected remedial alternatives during and after implementation. The risk evaluation of remedial alternatives (RERA) is performed to ensure selected alternatives are protective of human health and the environment. Final remedy selection is promulgated in a record of decision (ROD) and risks of the selected alternatives are documented. Included in the ROD documentation are the risk-related analyses for long-term effectiveness, short-term effectiveness, and overall protection of human health and the environment including how a remedy will eliminate, reduce or control risks and whether exposure will be reduced to acceptable levels. A major goal of RERA in the process leading to a ROD is to provide decision-makers with specific risk information that may be needed to choose among alternatives. For the Hanford Site, there are many considerations that must be addressed from a risk perspective. These include the large size of the Hanford Site, the presence of both chemical and radionuclide contamination, one likelihood of many analogues sites, public and worker health and safety, and stakeholder concern with ecological impacts from site contamination and remedial actions. A RERA methodology has been promulgated to (1) identify the points in the process leading to a ROD where risk assessment input is either required or desirable and (2) provide guidance on how to evaluate risks associated with remedial alternatives under consideration. The methodology and evaluations parallel EPA guidance requiring consideration of short-term impacts and the overall protectiveness of remedial actions for evaluating potential human health and ecological risks during selection of remedial alternatives, implementation of remedial measures, and following completion of remedial action

  19. On multi-site damage identification using single-site training data

    Science.gov (United States)

    Barthorpe, R. J.; Manson, G.; Worden, K.

    2017-11-01

    This paper proposes a methodology for developing multi-site damage location systems for engineering structures that can be trained using single-site damaged state data only. The methodology involves training a sequence of binary classifiers based upon single-site damage data and combining the developed classifiers into a robust multi-class damage locator. In this way, the multi-site damage identification problem may be decomposed into a sequence of binary decisions. In this paper Support Vector Classifiers are adopted as the means of making these binary decisions. The proposed methodology represents an advancement on the state of the art in the field of multi-site damage identification which require either: (1) full damaged state data from single- and multi-site damage cases or (2) the development of a physics-based model to make multi-site model predictions. The potential benefit of the proposed methodology is that a significantly reduced number of recorded damage states may be required in order to train a multi-site damage locator without recourse to physics-based model predictions. In this paper it is first demonstrated that Support Vector Classification represents an appropriate approach to the multi-site damage location problem, with methods for combining binary classifiers discussed. Next, the proposed methodology is demonstrated and evaluated through application to a real engineering structure - a Piper Tomahawk trainer aircraft wing - with its performance compared to classifiers trained using the full damaged-state dataset.

  20. Site quality in Appalachian hardwoods: the biological and economic response under selection silviculture

    Science.gov (United States)

    Orris D. McCauley; George R., Jr. Trimble

    1975-01-01

    The relative or percentage value response after 12 years of selective cutting practices on low- and high-quality sites in Appalachian hardwoods amounted to a 119-percent increase on the low-quality site and 145 percent on the high-quality site. The absolute value or actual dollar response, on the other hand, showed that the low-quality site increased in value only $76/...

  1. A cost effective waste management methodology for power reactor waste streams

    International Nuclear Information System (INIS)

    Granus, M.W.; Campbell, A.D.

    1984-01-01

    This paper describes a computer based methodology for the selection of the processing methods (solidification/dewatering) for various power reactor radwaste streams. The purpose of this methodology is to best select the method that provides the most cost effective solution to waste management. This method takes into account the overall cost of processing, transportation and disposal. The selection matrix on which the methodology is based is made up of over ten thousand combinations of liner, cask, process, and disposal options from which the waste manager can choose. The measurement device for cost effective waste management is the concurrent evaluation of total dollars spent. The common denominator is dollars per cubic foot of the input waste stream. Dollars per curie of the input waste stream provides for proper checks and balances. The result of this analysis can then be used to assess the total waste management cost. To this end, the methodology can then be employed to predict a given number of events (processes, transportation, and disposals) and project the annual cost of waste management. For the purposes of this paper, the authors provide examples of the application of the methodology on a typical BWR at 2, 4 and 6 years. The examples are provided in 1984 dollars. Process selection is influenced by a number of factors which must be independently evaluated for each waste stream. Final processing cost is effected by the particular process efficiency and a variety of regulatory constraints. The interface between process selection and cask selection/transportation driven by the goal of placing the greatest amount of pre-processed waste in the package and remaining within the bounds of weight, volume, regulatory, and cask availability limitations. Disposal is the cost of burial and can be affected by disposal, but availability of burial space, and the location of the disposal site in relation to the generator

  2. Dynamic Disturbance Processes Create Dynamic Lek Site Selection in a Prairie Grouse.

    Directory of Open Access Journals (Sweden)

    Torre J Hovick

    Full Text Available It is well understood that landscape processes can affect habitat selection patterns, movements, and species persistence. These selection patterns may be altered or even eliminated as a result of changes in disturbance regimes and a concomitant management focus on uniform, moderate disturbance across landscapes. To assess how restored landscape heterogeneity influences habitat selection patterns, we examined 21 years (1991, 1993-2012 of Greater Prairie-Chicken (Tympanuchus cupido lek location data in tallgrass prairie with restored fire and grazing processes. Our study took place at The Nature Conservancy's Tallgrass Prairie Preserve located at the southern extent of Flint Hills in northeastern Oklahoma. We specifically addressed stability of lek locations in the context of the fire-grazing interaction, and the environmental factors influencing lek locations. We found that lek locations were dynamic in a landscape with interacting fire and grazing. While previous conservation efforts have treated leks as stable with high site fidelity in static landscapes, a majority of lek locations in our study (i.e., 65% moved by nearly one kilometer on an annual basis in this dynamic setting. Lek sites were in elevated areas with low tree cover and low road density. Additionally, lek site selection was influenced by an interaction of fire and patch edge, indicating that in recently burned patches, leks were located near patch edges. These results suggest that dynamic and interactive processes such as fire and grazing that restore heterogeneity to grasslands do influence habitat selection patterns in prairie grouse, a phenomenon that is likely to apply throughout the Greater Prairie-Chicken's distribution when dynamic processes are restored. As conservation moves toward restoring dynamic historic disturbance patterns, it will be important that siting and planning of anthropogenic structures (e.g., wind energy, oil and gas and management plans not view lek

  3. Expert and non-expert groups perception of LILW repository site selection procedure

    International Nuclear Information System (INIS)

    Zeleznik, N.; Polic, M.

    2001-01-01

    Slovenia is now in the process of the site selection for a low and intermediate level radioactive waste (LILW) repository. Earlier searches for the LILW repository site confronted the Agency for radwaste management (ARAO) with a number of problems, mainly concerning the contacts with the local communities and their willingness to accept the repository. Therefore the Agency started with a new, so-called mixed mode approach to the site selection, where the special role of a mediator is introduced. The mediator represents the link between the investor and the local community, and facilitates the communication and negotiations between both. In this study we try to find out how people perceive the mediating process and conditions under which the LILW repository would be accepted in the local community. Therefore a special survey was conducted. The results showed some of the conditions under which participants would possibly accept the LILW repository. Differences in the perception between non-expert and expert groups were demonstrated and analysed, especially in the assessment of the consequences of LILW repository construction on the environment. Also the socio-psychological influences of the LILW repository were noted and examined. Consequences and recommendations for future work on the site selection procedure were prepared on the basis of the research results.(author)

  4. A novel methodology to estimate the evolution of construction waste in construction sites.

    Science.gov (United States)

    Katz, Amnon; Baum, Hadassa

    2011-02-01

    This paper focuses on the accumulation of construction waste generated throughout the erection of new residential buildings. A special methodology was developed in order to provide a model that will predict the flow of construction waste. The amount of waste and its constituents, produced on 10 relatively large construction sites (7000-32,000 m(2) of built area) was monitored periodically for a limited time. A model that predicts the accumulation of construction waste was developed based on these field observations. According to the model, waste accumulates in an exponential manner, i.e. smaller amounts are generated during the early stages of construction and increasing amounts are generated towards the end of the project. The total amount of waste from these sites was estimated at 0.2m(3) per 1m(2) floor area. A good correlation was found between the model predictions and actual data from the field survey. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. NEST-SITE SELECTION IN THE CAPE SUGARBIRD We dedicate ...

    African Journals Online (AJOL)

    These data, together with those on heat loss from an incubating bird, are ... in relation to nest-site selection as adaptive behaviour promoting breeding success through ... ability of food, in the form of nectar and nectiferous insects and arachnids .... cup of the nest, and the percentage vegetation cover was determined with the ...

  6. (-)PPAP: a new and selective ligand for sigma binding sites.

    Science.gov (United States)

    Glennon, R A; Battaglia, G; Smith, J D

    1990-11-01

    Most agents employed for the investigation of sigma (sigma) binding sites display relatively low affinity for these sites, bind both at sigma sites and at either phencyclidine (PCP) sites or dopamine receptors with similar affinity, and/or produce some dopaminergic activity in vivo. We describe a new agent, (-)PPAP or R(-)-N-(3-phenyl-n-propyl)-1-phenyl-2-aminopropane hydrochloride, that binds with high affinity and selectivity at sigma (IC50 = 24 nM) versus either PCP sites (IC50 greater than 75,000 nM) or D1 and D2 dopamine receptors (IC50 greater than 5,000 nM). The sigma affinity of this agent is comparable to that of the standard ligands (+)-3-PPP and DTG. Furthermore, although (-)PPAP is structurally related to amphetamine, it neither produces nor antagonizes amphetamine-like stimulus effect in rats trained to discriminate 1 mg/kg of S(+)amphetamine from saline.

  7. Report on ''questions of site selection''

    International Nuclear Information System (INIS)

    Alt, Stefan; Kallenbach-Herbert, Beate; Neles, Julia

    2016-01-01

    The report on radioactive waste site selection questions covers the following issues: excluded options: disposal in space, Antarctic, Greenland or oceans, surface storage without final deep geologic repository; possible alternatives: final disposal in deep boreholes, long-term interim storage, transmutation; central confinement function for radioactive wastes - geologic and/or technical barriers? Final repository monitoring: geo-scientific exclusion criteria, geo-scientific minimum requirements, geo-scientific decision criteria; geo-scientific data: information status and handling of regions with non-sufficient geo-scientific data; scientific planning criteria: basis for definitions concerning the content, procedural aspects; analysis of the socio-economic potential; requirements for the disposal of further radioactive wastes; requirements concerning the containers for final disposal.

  8. Positive selection neighboring functionally essential sites and disease-implicated regions of mammalian reproductive proteins.

    LENUS (Irish Health Repository)

    Morgan, Claire C

    2010-01-01

    ABSTRACT: BACKGROUND: Reproductive proteins are central to the continuation of all mammalian species. The evolution of these proteins has been greatly influenced by environmental pressures induced by pathogens, rival sperm, sexual selection and sexual conflict. Positive selection has been demonstrated in many of these proteins with particular focus on primate lineages. However, the mammalia are a diverse group in terms of mating habits, population sizes and germ line generation times. We have examined the selective pressures at work on a number of novel reproductive proteins across a wide variety of mammalia. RESULTS: We show that selective pressures on reproductive proteins are highly varied. Of the 10 genes analyzed in detail, all contain signatures of positive selection either across specific sites or in specific lineages or a combination of both. Our analysis of SP56 and Col1a1 are entirely novel and the results show positively selected sites present in each gene. Our findings for the Col1a1 gene are suggestive of a link between positive selection and severe disease type. We find evidence in our dataset to suggest that interacting proteins are evolving in symphony: most likely to maintain interacting functionality. CONCLUSION: Our in silico analyses show positively selected sites are occurring near catalytically important regions suggesting selective pressure to maximize efficient fertilization. In those cases where a mechanism of protein function is not fully understood, the sites presented here represent ideal candidates for mutational study. This work has highlighted the widespread rate heterogeneity in mutational rates across the mammalia and specifically has shown that the evolution of reproductive proteins is highly varied depending on the species and interacting partners. We have shown that positive selection and disease are closely linked in the Col1a1 gene.

  9. How to Select the most Relevant Roughness Parameters of a Surface: Methodology Research Strategy

    Science.gov (United States)

    Bobrovskij, I. N.

    2018-01-01

    In this paper, the foundations for new methodology creation which provides solving problem of surfaces structure new standards parameters huge amount conflicted with necessary actual floors quantity of surfaces structure parameters which is related to measurement complexity decreasing are considered. At the moment, there is no single assessment of the importance of a parameters. The approval of presented methodology for aerospace cluster components surfaces allows to create necessary foundation, to develop scientific estimation of surfaces texture parameters, to obtain material for investigators of chosen technological procedure. The methods necessary for further work, the creation of a fundamental reserve and development as a scientific direction for assessing the significance of microgeometry parameters are selected.

  10. Multi-Modal Active Perception for Autonomously Selecting Landing Sites on Icy Moons

    Science.gov (United States)

    Arora, A.; Furlong, P. M.; Wong, U.; Fong, T.; Sukkarieh, S.

    2017-01-01

    Selecting suitable landing sites is fundamental to achieving many mission objectives in planetary robotic lander missions. However, due to sensing limitations, landing sites which are both safe and scientifically valuable often cannot be determined reliably from orbit, particularly, in icy moon missions where orbital sensing data is noisy and incomplete. This paper presents an active perception approach to Entry Descent and Landing (EDL) which enables the lander to autonomously plan informative descent trajectories, acquire high quality sensing data during descent and exploit this additional information to select higher utility landing sites. Our approach consists of two components: probabilistic modeling of landing site features and approximate trajectory planning using a sampling based planner. The proposed framework allows the lander to plan long horizons paths and remain robust to noisy data. Results in simulated environments show large performance improvements over alternative approaches and show promise that our approach has strong potential to improve science return of not only icy moon missions but EDL systems in general.

  11. Development of a methodology for post closure radiological risk analysis of underground waste repositories. Illustrative assessment of the Harwell site

    International Nuclear Information System (INIS)

    Gralewski, Z.A.; Kane, P.; Nicholls, D.B.

    1987-06-01

    A probabilistic risk analysis (pra) is demonstrated for a number of ground water mediated release scenarios at the Harwell Site for a hypothetical repository at a depth of about 150 metres. This is the second stage of development of an overall risk assessment methodology. A procedure for carrying out multi-scenario assessment using available probabilistic risk assessment (pra) models is presented and a general methodology for combining risk contributions is outlined. Appropriate levels of model complexity in pra are discussed. Modelling requirements for the treatment of multiple simultaneous pathways and of site evolution are outlined. Further developments of pra systems are required to increase the realism of both the models and their mode of application, and hence to improve estimates of risk. (author)

  12. Enhanced Fuzzy-OWA model for municipal solid waste landfill site selection

    Science.gov (United States)

    Ahmad, Siti Zubaidah; Ahamad, Mohd Sanusi S.; Yusoff, Mohd Suffian; Abujayyab, Sohaib K. M.

    2017-10-01

    In Malaysia, the municipal solid waste landfill site is an essential facility that needs to be evaluated as its demand is infrequently getting higher. The increment of waste generation forces the government to cater the appropriate site for waste disposal. However, the selection process for new landfill sites is a difficult task with regard to land scarcity and time consumption. In addition, the complication will proliferate when there are various criteria to be considered. Therefore, this paper intends to show the significance of the fuzzy logic-ordered weighted average (Fuzzy-OWA) model for the landfill site suitability analysis. The model was developed to generalize the multi-criteria combination that was extended to the GIS applications as part of the decision support module. OWA has the capability to implement different combination operators through the selection of appropriate order weight that is possible in changing the form of aggregation such as minimum, intermediate and maximum types of combination. OWA give six forms of aggregation results that have their specific significance that indirectly evaluates the environmental, physical and socio-economic (EPSE) criteria respectively. Nevertheless, one of the aggregated results has shown similarity with the weighted linear combination (WLC) method.

  13. A multi-site study on medical school selection, performance, motivation and engagement

    NARCIS (Netherlands)

    Wouters, A.; Croiset, G.; Schripsema, N. R.; Cohen-Schotanus, J.; Spaai, G. W. G.; Hulsman, R. L.; Kusurkar, R. A.

    Medical schools seek ways to improve their admissions strategies, since the available methods prove to be suboptimal for selecting the best and most motivated students. In this multi-site cross-sectional questionnaire study, we examined the value of (different) selection procedures compared to a

  14. Bayesian site selection for fast Gaussian process regression

    KAUST Repository

    Pourhabib, Arash; Liang, Faming; Ding, Yu

    2014-01-01

    Gaussian Process (GP) regression is a popular method in the field of machine learning and computer experiment designs; however, its ability to handle large data sets is hindered by the computational difficulty in inverting a large covariance matrix. Likelihood approximation methods were developed as a fast GP approximation, thereby reducing the computation cost of GP regression by utilizing a much smaller set of unobserved latent variables called pseudo points. This article reports a further improvement to the likelihood approximation methods by simultaneously deciding both the number and locations of the pseudo points. The proposed approach is a Bayesian site selection method where both the number and locations of the pseudo inputs are parameters in the model, and the Bayesian model is solved using a reversible jump Markov chain Monte Carlo technique. Through a number of simulated and real data sets, it is demonstrated that with appropriate priors chosen, the Bayesian site selection method can produce a good balance between computation time and prediction accuracy: it is fast enough to handle large data sets that a full GP is unable to handle, and it improves, quite often remarkably, the prediction accuracy, compared with the existing likelihood approximations. © 2014 Taylor and Francis Group, LLC.

  15. Bayesian site selection for fast Gaussian process regression

    KAUST Repository

    Pourhabib, Arash

    2014-02-05

    Gaussian Process (GP) regression is a popular method in the field of machine learning and computer experiment designs; however, its ability to handle large data sets is hindered by the computational difficulty in inverting a large covariance matrix. Likelihood approximation methods were developed as a fast GP approximation, thereby reducing the computation cost of GP regression by utilizing a much smaller set of unobserved latent variables called pseudo points. This article reports a further improvement to the likelihood approximation methods by simultaneously deciding both the number and locations of the pseudo points. The proposed approach is a Bayesian site selection method where both the number and locations of the pseudo inputs are parameters in the model, and the Bayesian model is solved using a reversible jump Markov chain Monte Carlo technique. Through a number of simulated and real data sets, it is demonstrated that with appropriate priors chosen, the Bayesian site selection method can produce a good balance between computation time and prediction accuracy: it is fast enough to handle large data sets that a full GP is unable to handle, and it improves, quite often remarkably, the prediction accuracy, compared with the existing likelihood approximations. © 2014 Taylor and Francis Group, LLC.

  16. Site selection process for radioactive waste repository (radioactive facility) in Cuba as a fundamental safety criteria; Proceso de seleccion de emplazamiento como criterio fundamental de la seguridad para el repositorio de desechos radiactivos (instalacion radiactiva) en Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Vital, Jose Luis Peralta; Castillo, Reinaldo Gil; Chales Suarez, Gustavo; Rodriguez Reyes, Aymee [Centro de Tecnologia Nuclear, La Habana (Cuba)

    1999-11-01

    The paper show the process of search carried out for the selection of the safest site in the National territory, in order to sitting the Facility (Repository) that will disposal the low and intermediate level radioactive wastes, as well as the possible Storage Facility for nuclear spent Fuel (radioactive wastes of high activity). We summarize the obtained Methodology and the Criterions of exclusion adopted for the development of the Process of site selection, as well as the current condition of the researches that will permit the obtaining of the nominative objectives. (author) 18 refs., 1 fig., 1 tab.

  17. COPS model estimates of LLEA availability near selected reactor sites

    International Nuclear Information System (INIS)

    Berkbigler, K.P.

    1979-11-01

    The COPS computer model has been used to estimate local law enforcement agency (LLEA) officer availability in the neighborhood of selected nuclear reactor sites. The results of these analyses are presented both in graphic and tabular form in this report

  18. GIS and Multicriteria Decision Analysis for Landfill Site Selection in AL-HashimyahQadaa

    OpenAIRE

    Alanbari, Mohammad Ali; Al-Ansari, Nadhir; Jasim, Hadeel Kareem

    2014-01-01

    Waste management system is not well regulated in Iraq. Despite the fact that there are various techniques used for solid waste disposal, landfill is the most common mode for the disposal of solid waste in Iraq, landfill site selection criteria is quite complex process and it depends on several regulation and factors. In this study landfill site selection is performed by using Multicriteria Decision Analysis (MCDA) and Geographic Information System (GIS) for the Al-Hashimyahqadaa. Existing lan...

  19. Bacterial production of site specific {sup 13}C labeled phenylalanine and methodology for high level incorporation into bacterially expressed recombinant proteins

    Energy Technology Data Exchange (ETDEWEB)

    Ramaraju, Bhargavi; McFeeters, Hana; Vogler, Bernhard; McFeeters, Robert L., E-mail: robert.mcfeeters@uah.edu [University of Alabama in Huntsville, Department of Chemistry (United States)

    2017-01-15

    Nuclear magnetic resonance spectroscopy studies of ever larger systems have benefited from many different forms of isotope labeling, in particular, site specific isotopic labeling. Site specific {sup 13}C labeling of methyl groups has become an established means of probing systems not amenable to traditional methodology. However useful, methyl reporter sites can be limited in number and/or location. Therefore, new complementary site specific isotope labeling strategies are valuable. Aromatic amino acids make excellent probes since they are often found at important interaction interfaces and play significant structural roles. Aromatic side chains have many of the same advantages as methyl containing amino acids including distinct {sup 13}C chemical shifts and multiple magnetically equivalent {sup 1}H positions. Herein we report economical bacterial production and one-step purification of phenylalanine with {sup 13}C incorporation at the Cα, Cγ and Cε positions, resulting in two isolated {sup 1}H-{sup 13}C spin systems. We also present methodology to maximize incorporation of phenylalanine into recombinantly overexpressed proteins in bacteria and demonstrate compatibility with ILV-methyl labeling. Inexpensive, site specific isotope labeled phenylalanine adds another dimension to biomolecular NMR, opening new avenues of study.

  20. Agile methodology selection criteria: IT start-up case study

    Science.gov (United States)

    Micic, Lj

    2017-05-01

    Project management in modern IT companies is often based on agile methodologies which have several advantages compared to traditional methodologies such is waterfall. Having in mind that clients sometimes change project during development it is crucial for an IT company to choose carefully which methodology is going to implement and is it going to be mostly based on one or is it going got be combination of several. There are several modern and often used methodologies but among those Scrum, Kanban and XP programming are usually the most common. Sometimes companies use mostly tools and procedures from one but quite often they use some of the combination of those methodologies. Having in mind that those methodologies are just a framework they allow companies to adapt it for their specific projects as well as for other limitations. These methodologies are in limited usage Bosnia but more and more IT companies are starting to use agile methodologies because it is practice and common not just for their clients abroad but also starting to be the only option in order to deliver quality product on time. However it is always challenging which methodology or combination of several companies should implement and how to connect it to its own project, organizational framework and HR management. This paper presents one case study based on local IT start up and delivers solution based on theoretical framework and practical limitations that case company has.

  1. Feeding-Danger Trade-Offs Underlie Stopover Site Selection by Migrants

    Directory of Open Access Journals (Sweden)

    Andrea C. Pomeroy

    2008-06-01

    Full Text Available To migrate successfully, birds need to store adequate fat reserves to fuel each leg of the journey. Migrants acquire their fuel reserves at stopover sites; this often entails exposure to predators. Therefore, the safety attributes of sites may be as important as the feeding opportunities. Furthermore, site choice might depend on fuel load, with lean birds more willing to accept danger to obtain good feeding. Here, we evaluate the factors underlying stopover-site usage by migrant Western Sandpipers (Calidris mauri on a landscape scale. We measured the food and danger attributes of 17 potential stopover sites in the Strait of Georgia and Puget Sound region. We used logistic regression models to test whether food, safety, or both were best able to predict usage of these sites by Western Sandpipers. Eight of the 17 sites were used by sandpipers on migration. Generally, sites that were high in food and safety were used, whereas sites that were low in food and safety were not. However, dangerous sites were used if there was ample food abundance, and sites with low food abundance were used if they were safe. The model including both food and safety best-predicted site usage by sandpipers. Furthermore, lean sandpipers used the most dangerous sites, whereas heavier birds (which do not need to risk feeding in dangerous locations used safer sites. This study demonstrates that both food and danger attributes are considered by migrant birds when selecting stopover sites, thus both these attributes should be considered to prioritize and manage stopover sites for conservation.

  2. Site selection model for new metro stations based on land use

    Science.gov (United States)

    Zhang, Nan; Chen, Xuewu

    2015-12-01

    Since the construction of metro system generally lags behind the development of urban land use, sites of metro stations should adapt to their surrounding situations, which was rarely discussed by previous research on station layout. This paper proposes a new site selection model to find the best location for a metro station, establishing the indicator system based on land use and combining AHP with entropy weight method to obtain the schemes' ranking. The feasibility and efficiency of this model has been validated by evaluating Nanjing Shengtai Road station and other potential sites.

  3. Selection of remedial alternatives for mine sites: a multicriteria decision analysis approach.

    Science.gov (United States)

    Betrie, Getnet D; Sadiq, Rehan; Morin, Kevin A; Tesfamariam, Solomon

    2013-04-15

    The selection of remedial alternatives for mine sites is a complex task because it involves multiple criteria and often with conflicting objectives. However, an existing framework used to select remedial alternatives lacks multicriteria decision analysis (MCDA) aids and does not consider uncertainty in the selection of alternatives. The objective of this paper is to improve the existing framework by introducing deterministic and probabilistic MCDA methods. The Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE) methods have been implemented in this study. The MCDA analysis involves processing inputs to the PROMETHEE methods that are identifying the alternatives, defining the criteria, defining the criteria weights using analytical hierarchical process (AHP), defining the probability distribution of criteria weights, and conducting Monte Carlo Simulation (MCS); running the PROMETHEE methods using these inputs; and conducting a sensitivity analysis. A case study was presented to demonstrate the improved framework at a mine site. The results showed that the improved framework provides a reliable way of selecting remedial alternatives as well as quantifying the impact of different criteria on selecting alternatives. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Process for selecting a site for Canada's deep geological repository for used nuclear fuel

    International Nuclear Information System (INIS)

    Facella, J.; Belfadhel, M.B.

    2011-01-01

    The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management, the approach selected by the Government of Canada for long-term management of used nuclear fuel waste generated by Canadian nuclear reactors. The ultimate objective of Adaptive Phased Management is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable crystalline or sedimentary rock formation at a depth of about 500m. The repository will consist of a series of access and service shafts and a series of tunnels leading to placement rooms where used fuel will be placed and sealed in competent rock using a multi-barrier system which includes long lived specially designed containers, sealing materials such as bentonite and the rock itself. The used fuel will be monitored throughout all phases of implementation and will also remain retrievable for an extended period of time. In May 2010, the NWMO published the site selection process that serves as the road map to decision-making on the location for the deep geological repository. NWMO initiated the process with a first stage that invites communities to learn more about the project and the site selection process. NWMO is actively building awareness of the project and, on request of communities, is delivering briefings, supporting community capacity building and undertaking high-level screenings of site suitability. The paper provides a brief description of: Adaptive Phased Management including the deep geological repository which is its ultimate goal, and the design of the site selection process, and importantly the approach to assessing the suitability of sites from both a social and technical perspective. The paper will outline how NWMO sought to develop a socially-acceptable site selection process as a firm foundation for future decisions on siting. Through a two-year collaborative process, NWMO sought to understand the expectations of

  5. Development of a novel set of criteria to select methodology for designing product service systems

    Directory of Open Access Journals (Sweden)

    Tuananh Tran

    2016-04-01

    Full Text Available This paper proposes eight groups of twenty nine scoring criteria that can help designers and practitioners to compare and select an appropriate methodology for a certain problem in designing product service system (PSS. PSS has been researched for more than a decade and is now becoming more and more popular in academia as well as industry. Despite that fact, the adoption of PSS is still limited for its potential. One of the main reasons is that designing PSS itself is a challenge. Designers and developers face difficulties in choosing appropriate PSS design methodologies for their projects so that they can design effective PSS offerings. By proposing eight groups of twenty nine scoring criteria, this paper enables a “step by step” process to identify the most appropriate design methodology for a company’s PSS problem. An example is also introduced to illustrate the use of the proposed scoring criteria and provide a clear picture of how different design methodologies can be utilized at their best in terms of application.

  6. Safety assessment input for site selection - the Swedish example - 59031

    International Nuclear Information System (INIS)

    Andersson, Johan

    2012-01-01

    Svensk Kaernbraenslehantering AB (SKB) has performed comprehensive investigations of two candidate sites for a final repository for Sweden's spent nuclear fuel. In March 2011 SKB decided to submit licence applications for a final repository at Forsmark. Before selection, SKB stated that the site that offers the best prospects for achieving long-term safety in practice would be selected. Based on experiences previous safety assessments, a number of issues related to long-term safety need to be considered in the context of site comparison. The factors include sensitivity to climate change such as periods of permafrost and glaciations, rock mechanics evolution including the potential for thermally induced spalling and sensitivity to potential future earthquakes, current and future groundwater flow, evolution of groundwater composition and proximity to mineral resources. Each of these factors related to long-term safety for the two candidate sites is assessed in a comparative analysis of site characteristics. The assessment also considers differences in biosphere conditions and in the confidence of the site descriptions. The comparison is concluded by an assessment on how the identified differences would affect the estimated radiological risk from a repository located at either of the sites. The assessment concludes that there are a number of safety related site characteristics for which the analyses do not show any decisive differences in terms of implications on safety, between the sites Forsmark and Laxemar. However, the frequency of water conducting fractures at repository depth is much smaller at Forsmark than at Laxemar. This difference, in turn, affects the future stability of the current favourable groundwater composition, which combined with the much higher flows at Laxemar would, for the current repository design, lead to a breach in the safety functions for the buffer and the canister for many more deposition positions at Laxemar than at Forsmark. Thereby

  7. Site-Selective Conjugation of Native Proteins with DNA

    DEFF Research Database (Denmark)

    Trads, Julie Brender; Tørring, Thomas; Gothelf, Kurt Vesterager

    2017-01-01

    Conjugation of DNA to proteins is increasingly used in academia and industry to provide proteins with tags for identification or handles for hybridization to other DNA strands. Assay technologies such as immuno-PCR and proximity ligation and the imaging technology DNA-PAINT require DNA-protein....... The introduction of a bioorthogonal handle at a specific position of a protein by recombinant techniques provides an excellent approach to site-specific conjugation, but for many laboratories and for applications where several proteins are to be labeled, the expression of recombinant proteins may be cumbersome...... conjugates. In DNA nanotechnology, the DNA handle is exploited to precisely position proteins by self-assembly. For these applications, site-selective conjugation is almost always desired because fully functional proteins are required to maintain the specificity of antibodies and the activity of enzymes...

  8. Retroviral DNA integration: viral and cellular determinants of target-site selection.

    Directory of Open Access Journals (Sweden)

    Mary K Lewinski

    2006-06-01

    Full Text Available Retroviruses differ in their preferences for sites for viral DNA integration in the chromosomes of infected cells. Human immunodeficiency virus (HIV integrates preferentially within active transcription units, whereas murine leukemia virus (MLV integrates preferentially near transcription start sites and CpG islands. We investigated the viral determinants of integration-site selection using HIV chimeras with MLV genes substituted for their HIV counterparts. We found that transferring the MLV integrase (IN coding region into HIV (to make HIVmIN caused the hybrid to integrate with a specificity close to that of MLV. Addition of MLV gag (to make HIVmGagmIN further increased the similarity of target-site selection to that of MLV. A chimeric virus with MLV Gag only (HIVmGag displayed targeting preferences different from that of both HIV and MLV, further implicating Gag proteins in targeting as well as IN. We also report a genome-wide analysis indicating that MLV, but not HIV, favors integration near DNase I-hypersensitive sites (i.e., +/- 1 kb, and that HIVmIN and HIVmGagmIN also favored integration near these features. These findings reveal that IN is the principal viral determinant of integration specificity; they also reveal a new role for Gag-derived proteins, and strengthen models for integration targeting based on tethering of viral IN proteins to host proteins.

  9. Engineering study of generic site criteria for selected DOE plutonium facilities

    International Nuclear Information System (INIS)

    Kingsbury, R.J.; Greenwood, J.M.; Sandoval, M.D.

    1980-09-01

    The objectives of this study were to identify criteria that would be applied to selection of a site for plutonium facilities such as those at the Rocky Flats Plant, to establish the relative importance of these criteria, and to identify suitable areas within the United States for location of plutonium facilities with respect to these criteria. Sources of the site criteria identified include federal laws, federal agency regulations, state laws and regulations, and requirements associated with operations to be performed at the site. The criteria identified during the study were organized into 14 major categories. The relative importnace of each category and each criterion within the categories were established using group decision-making techniques. The major criteria categories, their assigned weight on a scale of 1 to 10, and their relative priority ranks are as follows: geology/seismicity; public safety; environmental impact; meteorology; hydrology; topography; transportation; utilities; personnel; safeguards/security; land area and availability; land use compatibility; and, public acceptance. A suitability analysis of the continental United States was performed using only those criteria that could be mapped at a national scale. Suitability was assessed with respect to each of these criteria, and individual suitability maps were prepared. A composite suitability map was generated using computerized overlay techniques. This map provides a starting point for identifying specific candidate sites if an actual site selection were to be conducted

  10. Maternal and individual effects in selection of bed sites and their consequences for fawn survival at different spatial scales.

    Science.gov (United States)

    Van Moorter, Bram; Gaillard, Jean-Michel; McLoughlin, Philip D; Delorme, Daniel; Klein, François; Boyce, Mark S

    2009-03-01

    We examined the relationship between survival of roe deer (Capreolus capreolus) fawns at Trois Fontaines, Champagne-Ardennes, France, and factors related to bed-site selection (predator avoidance and thermoregulation) and maternal food resources (forage availability in the maternal home range). Previous studies have demonstrated that at small scales, the young of large herbivores select bed sites independently from their mothers, although this selection takes place within the limits of their mother's home range. Fawn survival was influenced largely by the availability of good bed sites within the maternal home range, not by the fawn's selection of bed sites; however, selection for thermal cover when selecting bed sites positively influenced survival of young fawns. Typical features of a good home range included close proximity to habitat edges, which is related to forage accessibility for roe deer. The availability of bed sites changed as fawns aged, probably due to an increased mobility of the fawn or a different use of the home range by the mother; sites offering high concealment and thermal protection became less available in favor of areas with higher forage accessibility. Despite the minor influence of bed-site selection on survival, roe deer fawns strongly selected their bed sites according to several environmental factors linked to predator avoidance and thermoregulation. Fawns selected for sites providing concealment, light penetration, and avoided signs of wild boar (Sus scrofa) activity. Avoidance of sites with high light penetration by young fawns positively affected their survival, confirming a negative effect on thermoregulation due to reduced thermal cover. Selection for light penetration by older fawns was less clear. We discuss these results in the context of cross-generational effects in habitat selection across multiple scales, and the potential influence of the 'ghost of predation past'.

  11. The site selection law and the anti-atom movement

    International Nuclear Information System (INIS)

    Haefner, Daniel

    2015-01-01

    The anti atom movement has reached many of their political claims with the German nuclear power phaseout. At the same time the government has regained the interpretive dominance with the in radioactive waste management with the new search for possible final repository sites. He anti-atom movement refuses most parts of the actual law but cannot abdicate from the responsibility of the process of site selection. The contribution shows using three actual research approaches that such a convergence is probable to occur in the future. A cooperation of anti-atom movement and the government is of high probability in the long term, but is not necessarily identical to a political acceptance.

  12. A Study on Site Selecting for National Project including High Level Radioactive Waste Disposal

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kilyoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Many national projects are stopped since sites for the projects are not determined. The sites selections are hold by NIMBY for unpleasant facilities or by PYMFY for preferable facilities among local governments. The followings are the typical ones; NIMBY projects: high level radioactive waste disposal, THAAD, Nuclear power plant(NPP), etc. PIMFY projects: South-east new airport, KTX station, Research center for NPP decommission, etc. The site selection for high level radioactive waste disposal is more difficult problem, and thus government did not decide and postpone to a dead end street. Since it seems that there is no solution for site selection for high level radioactive waste disposal due to NIMBY among local governments, a solution method is proposed in this paper. To decide a high level radioactive waste disposal, the first step is to invite a bid by suggesting a package deal including PIMFY projects such as Research Center for NPP decommission. Maybe potential host local governments are asked to submit sealed bids indicating the minimum compensation sum that they would accept the high level radioactive waste disposal site. If there are more than one local government put in a bid, then decide an adequate site by considering both the accumulated PESS point and technical evaluation results. By considering how fairly preferable national projects and unpleasant national projects are distributed among local government, sites selection for NIMBY or PIMFY facilities is suggested. For NIMBY national projects, risk, cost benefit analysis is useful and required since it generates cost value to be used in the PESS. For many cases, the suggested method may be not adequate. However, similar one should be prepared, and be basis to decide sites for NIMBY or PIMFY national projects.

  13. Site-selective three-component reaction for dual-functionalization of peptides

    DEFF Research Database (Denmark)

    Munch, Henrik Kofoed; Rasmussen, Jakob Ewald; Popa, Gina

    2013-01-01

    A site-selective dual-functionalization of peptides is presented, involving readily available maleimides as well as N-hydroxylamines. The modification proceeds through a three component 1,3-dipolar cycloaddition, forming a stable product. This was exemplified by the one-pot attachment of two...

  14. Site selection and evaluation of nuclear power units in Egypt

    International Nuclear Information System (INIS)

    Bonnefille, R.

    1980-01-01

    The selection of sites for nuclear power units in Egypt by SOFRATOME for Nuclear Plants Authority is carried on using a method based on interaction between different criteria. The method and the main results on criterion 'radio-ecological impact' are sketched briefly [fr

  15. Species selection methodology for an ecological assessment of the Columbia River at the Hanford Site

    International Nuclear Information System (INIS)

    Becker, J.M.; Brandt, C.A.; Dauble, D.D.; Maughan, A.D.; O'Neil, T.K.

    1995-01-01

    Pacific Northwest National Laboratory is conducting an ecological risk assessment of the Columbia River to evaluate the current hazards posed by residual contamination from past nuclear production operations at Hanford. Due to the complexity of the aquatic and riparian ecological communities, a three-step species selection process was developed. In step 1, a comprehensive species list was developed using natural resource agency databases that identified plant and animal species known to occur in the Columbia River study area. In step 2, a panel of regional biologists from federal and state resource additional criteria to derive a list of 181 species of concern. In step 3, the species of concern were qualitatively ranked based on a scoring of their potential exposure and sensitivity to contaminants using a conceptual exposure model for the study area. In this model, species were scored based on (1) potential dietary exposure to biomagnifying and non-biomagnifying contaminants, (2) potential dermal and inhalation exposure to contaminants, (3) exposure duration, and (4) sensitivity to contaminants. From this ranking the stakeholders selected 65 tentative species for further evaluation. By excluding species that seldom use the river and riparian areas, and selecting within the same foraging guild, this list was further reduced to 43 species for evaluation in the screening-level risk assessment

  16. The importance of environmental quality and catch potential to fishing site selection by freshwater anglers in Mississippi

    Science.gov (United States)

    Schramm, H.L.; Gerard, P.D.; Gill, D.A.

    2003-01-01

    We measured the importance of 24 fishing site attributes to Mississippi freshwater anglers. Factor analysis identified four multiattribute factors as important in the selection of fishing location: CLEAN ENVIRONMENT CATCH, COST AND HARVEST and AMENITIES AND SAFETY. In general, the importance of site selection factors differed little among anglers grouped by preferred type of fish, preferred fishing location (lakes and reservoirs, rivers and streams, ponds, or reservoir tailwaters), usual manner of fishing (engine-powered boat, nonpowered boat, or shore), or change in fishing frequency. COST AND HARVEST was more important to anglers with high harvest orientations. We found low correlations between site selection factor importance scores and angler age, fishing frequency, fishing expenditures, or fishing motivation factors. We suggest that the general lack of differences in site selection factors among angler groups indicates that management strategies to improve fishing site attributes should benefit all angler groups. Clean fishing environments and awareness of the availability of desired sport fishes were "very" or "extremely" important to fishing site selection by more than 70% of Mississippi freshwater anglers and should be priority management objectives.

  17. Single site porphyrine-like structures advantages over metals for selective electrochemical CO2 reduction

    DEFF Research Database (Denmark)

    Bagger, Alexander; Ju, Wen; Varela, Ana Sofia

    2017-01-01

    Currently, no catalysts are completely selective for the electrochemical CO2 Reduction Reaction (CO2RR). Based on trends in density functional theory calculations of reaction intermediates we find that the single metal site in a porphyrine-like structure has a simple advantage of limiting...... the competing Hydrogen Evolution Reaction (HER). The single metal site in a porphyrine-like structure requires an ontop site binding of hydrogen, compared to the hollow site binding of hydrogen on a metal catalyst surface. The difference in binding site structure gives a fundamental energy-shift in the scaling...... relation of ∼0.3eV between the COOH* vs. H* intermediate (CO2RR vs. HER). As a result, porphyrine-like catalysts have the advantage over metal catalyst of suppressing HER and enhancing CO2RR selectivity....

  18. Site suitability, selection and characterization: Branch technical position--Low-Level Waste Licensing Branch

    International Nuclear Information System (INIS)

    Siefken, D.; Pangburn, G.; Pennifill, R.; Starmer, R.J.

    1982-04-01

    The staff provides an expanded interpretation of the site suitability requirements in the proposed rule 10 CFR Part 61, a description of the anticipated site selection process, and a detailed discussion of the site characterization program needed to support a license application and environmental report. The paper provides early-on guidance to prospective applicants in these three subject areas

  19. Site locality identification study: Hanford Site. Volume I. Methodology, guidelines, and screening

    International Nuclear Information System (INIS)

    1980-07-01

    Presented in this report are the results of the site locality identification study for the Hanford Site using a screening process. To enable evaluation of the entire Hanford Site, the screening process was applied to a somewhat larger area; i.e., the Pasco Basin. The study consisted of a series of screening steps that progressively focused on smaller areas which are within the Hanford Site and which had a higher potential for containing suitable repository sites for nuclear waste than the areas not included for further study. Five site localities, designated H-1, H-2, H-3, H-4, H-5 (Figure A), varying in size from approximately 10 to 50 square miles, were identified on the Hanford Site. It is anticipated that each site locality may contain one or more candidate sites suitable for a nuclear waste repository. The site locality identification study began with definition of objectives and the development of guidelines for screening. Three objectives were defined: (1) maximize public health and safety; (2) minimize adverse environmental and socioeconomic impacts; and (3) minimize system costs. The screening guidelines have numerical values that provided the basis for the successive reduction of the area under study and to focus on smaller areas that had a higher likelihood of containing suitable sites

  20. Seeing the forest through the trees: Considering roost-site selection at multiple spatial scales

    Science.gov (United States)

    Jachowski, David S.; Rota, Christopher T.; Dobony, Christopher A.; Ford, W. Mark; Edwards, John W.

    2016-01-01

    Conservation of bat species is one of the most daunting wildlife conservation challenges in North America, requiring detailed knowledge about their ecology to guide conservation efforts. Outside of the hibernating season, bats in temperate forest environments spend their diurnal time in day-roosts. In addition to simple shelter, summer roost availability is as critical as maternity sites and maintaining social group contact. To date, a major focus of bat conservation has concentrated on conserving individual roost sites, with comparatively less focus on the role that broader habitat conditions contribute towards roost-site selection. We evaluated roost-site selection by a northern population of federally-endangered Indiana bats (Myotis sodalis) at Fort Drum Military Installation in New York, USA at three different spatial scales: landscape, forest stand, and individual tree level. During 2007–2011, we radiotracked 33 Indiana bats (10 males, 23 females) and located 348 roosting events in 116 unique roost trees. At the landscape scale, bat roost-site selection was positively associated with northern mixed forest, increased slope, and greater distance from human development. At the stand scale, we observed subtle differences in roost site selection based on sex and season, but roost selection was generally positively associated with larger stands with a higher basal area, larger tree diameter, and a greater sugar maple (Acer saccharum) component. We observed no distinct trends of roosts being near high-quality foraging areas of water and forest edges. At the tree scale, roosts were typically in American elm (Ulmus americana) or sugar maple of large diameter (>30 cm) of moderate decay with loose bark. Collectively, our results highlight the importance of considering day roost needs simultaneously across multiple spatial scales. Size and decay class of individual roosts are key ecological attributes for the Indiana bat, however, larger-scale stand structural

  1. Defense nuclear energy systems selection methodology for civil nuclear power applications

    International Nuclear Information System (INIS)

    Scarborough, J.C.

    1986-01-01

    A methodology developed to select a preferred nuclear power system for a US Department of Defense (DOD) application has been used to evaluate preferred nuclear power systems for a remote island community in Southeast Asia. The plant would provide ∼10 MW of electric power, possibly low-temperature process heat for the local community, and would supplement existing island diesel electric capacity. The nuclear power system evaluation procedure was evolved from a disciplined methodology for ranking ten nuclear power designs under joint development by the US Department of Energy (DOE) and DOD. These included six designs proposed by industry for the Secure Military Power Plant Program (now termed Multimegawatt Terrestrial Reactor Program), the SP-100 Program, the North Warning System Program, and the Modular Advanced High-Temperature Gas-Cooled Reactor (HTGR) and Liquid-Metal Reactor (LMR) programs. The 15 evaluation criteria established for the civil application were generally similar to those developed and used for the defense energy systems evaluation, except that the weighting factor applied to each individual criterion differed. The criteria and their weighting (importance) functions for the civil application are described

  2. Site selection for disposal of nuclear waste - on what grounds? A report from hearings at the Council June 4-5 2008

    International Nuclear Information System (INIS)

    2009-01-01

    As part of the Nuclear Waste Council's own knowledge-building on site selection, the Council organized a hearing on the what grounds site selection will be made. The public hearing, had several objectives: to contribute to knowledge building on site selection for Nuclear Waste Council and other actors, to contribute to an improved basis for site selection by clarifying the factors and values of importance, to clarify the different actors' expectations SKB's future accounting, to highlight how to deal with different aspects (safety, geological, environmental, infrastructural, socio-economic and democratic) instruments for site selection, and to identify operators of critical issues. The report is divided into the following sections: The Government's View on the upcoming Site Selection; the Site Selection Process, The View of the Local Communities on the Site Selection; the Current Status of the Selection Process, SKB's plans, the Site-Selection Factors; he Authorities' perspective; the Environmental Organizations perspective; Reflections of the Council on the Hearings; Discussion and Analysis of Key Issues related to Groundwater Flow, Final Discussion

  3. Role of mine ventilation in site selection for a nuclear waste repository

    International Nuclear Information System (INIS)

    McPherson, M.J.

    1984-01-01

    The application of mine ventilation practice and theory to the measurement of groundwater flow for the purpose of the selection of sites for underground storage of nuclear spent fuel is described. The discipline of mine ventilation has an important part to play not only in the design and operation of an underground nuclear waste repository but also during the early stages of potential site characterization. One of the most vital factors in the selection of a suitable site is the rate at which groundwater can flow through the native rock. The effects of repository heat on groundwater migration are highlighted and a description of a major experiment in an underground test site is included. Detailed monitoring of airflow and its psychrometric properties enabled quantification of very low rates of water seepage into an isolated heading. The results indicated the relationship between permeability of a fractured rock and temperature. The transient phenomena that govern evaporation of water from fissured rock surfaces in the test chamber are also examined. (author)

  4. Strategic alternatives ranking methodology: Multiple RCRA incinerator evaluation test case

    International Nuclear Information System (INIS)

    Baker, G.; Thomson, R.D.; Reece, J.; Springer, L.; Main, D.

    1988-01-01

    This paper presents an important process approach to permit quantification and ranking of multiple alternatives being considered in remedial actions or hazardous waste strategies. This process is a methodology for evaluating programmatic options in support of site selection or environmental analyses. Political or other less tangible motivations for alternatives may be quantified by means of establishing the range of significant variables, weighting their importance, and by establishing specific criteria for scoring individual alternatives. An application of the process to a recent AFLC program permitted ranking incineration alternatives from a list of over 130 options. The process forced participation by the organizations to be effected, allowed a consensus of opinion to be achieved, allowed complete flexibility to evaluate factor sensitivity, and resulted in strong, quantifiable support for any subsequent site-selection action NEPA documents

  5. Elucidation of Mechanisms and Selectivities of Metal-Catalyzed Reactions using Quantum Chemical Methodology.

    Science.gov (United States)

    Santoro, Stefano; Kalek, Marcin; Huang, Genping; Himo, Fahmi

    2016-05-17

    Quantum chemical techniques today are indispensable for the detailed mechanistic understanding of catalytic reactions. The development of modern density functional theory approaches combined with the enormous growth in computer power have made it possible to treat quite large systems at a reasonable level of accuracy. Accordingly, quantum chemistry has been applied extensively to a wide variety of catalytic systems. A huge number of problems have been solved successfully, and vast amounts of chemical insights have been gained. In this Account, we summarize some of our recent work in this field. A number of examples concerned with transition metal-catalyzed reactions are selected, with emphasis on reactions with various kinds of selectivities. The discussed cases are (1) copper-catalyzed C-H bond amidation of indoles, (2) iridium-catalyzed C(sp(3))-H borylation of chlorosilanes, (3) vanadium-catalyzed Meyer-Schuster rearrangement and its combination with aldol- and Mannich-type additions, (4) palladium-catalyzed propargylic substitution with phosphorus nucleophiles, (5) rhodium-catalyzed 1:2 coupling of aldehydes and allenes, and finally (6) copper-catalyzed coupling of nitrones and alkynes to produce β-lactams (Kinugasa reaction). First, the methodology adopted in these studies is presented briefly. The electronic structure method in the great majority of these kinds of mechanistic investigations has for the last two decades been based on density functional theory. In the cases discussed here, mainly the B3LYP functional has been employed in conjunction with Grimme's empirical dispersion correction, which has been shown to improve the calculated energies significantly. The effect of the surrounding solvent is described by implicit solvation techniques, and the thermochemical corrections are included using the rigid-rotor harmonic oscillator approximation. The reviewed examples are chosen to illustrate the usefulness and versatility of the adopted methodology in

  6. Demands and criteria for the site selection from the view of the power plant owners

    International Nuclear Information System (INIS)

    Staebler, K.; Beising, R.

    1975-01-01

    Function of electricity supply utilities from the point of view of choice of site; energy business background; references to the mode of procedure in site selection; pragmatic principle of site choice. (HP) [de

  7. Biomimetic conformation-specific assembly of proteins at artificial binding sites nano-patterned on silicon

    Science.gov (United States)

    de la Rica, Roberto; Matsui, Hiroshi

    2009-01-01

    Biomolecules such as enzymes and antibodies possess binding sites where the molecular architecture and the physicochemical properties are optimum for their interaction with a particular target, in some cases even differentiating between stereoisomers. Here, we mimic this exquisite specificity via the creation of a suitable chemical environment by fabricating artificial binding sites for the protein calmodulin (CaM). By downscaling well-known surface chemical modification methodologies to the nanometer scale via silicon nanopatterning, the Ca2+-CaM conformer was found to selectively bind the biomimetic binding sites. The methodology could be adapted to mimic other protein-receptor interactions for sensing and catalysis. PMID:19757782

  8. Nest-site selection in the acorn woodpecker

    Science.gov (United States)

    Hooge, P.N.; Stanback, M.T.; Koenig, Walter D.

    1999-01-01

    Acorn Woodpeckers (Melanerpes formicivorus) at Hastings Reservation in central California prefer to nest in dead limbs in large, dead valley oaks (Quercus lobata) and California sycamores (Platanus racemosa) that are also frequently used as acorn storage trees. Based on 232 nest cavities used over an 18-year period, we tested whether preferred or modal nest-site characters were associated with increased reproductive success (the "nest-site quality" hypothesis). We also examined whether more successful nests were likely to experience more favorable microclimatic conditions or to be less accessible to terrestrial predators. We found only equivocal support for the nest-site quality hypothesis: only 1 of 5 preferred characters and 2 of 10 characters exhibiting a clear modality were correlated with higher reproductive success. All three characteristics of nests known or likely to be associated with a more favorable microclimate, and two of five characteristics likely to render nests less accessible to predators, were correlated with higher reproductive success. These results suggest that nest cavities in this population are built in part to take advantage of favorable microclimatic conditions and, to a lesser extent, to reduce access to predators. However, despite benefits of particular nest characteristics, birds frequently nested in apparently suboptimal cavities. We also found a significant relationship between mean group size and the history of occupancy of particular territories and the probability of nest cavities being built in microclimatically favorable live limbs, suggesting that larger groups residing on more stable territories were better able to construct nests with optimal characteristics. This indicates that there may be demographic, as well as ecological, constraints on nest-site selection in this primary cavity nester.

  9. Evaluation of Suitability of Selected Set of Coal Plant Sites for Repowering with Small Modular Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Belles, Randy [ORNL; Copinger, Donald A [ORNL; Mays, Gary T [ORNL; Omitaomu, Olufemi A [ORNL; Poore III, Willis P [ORNL

    2013-03-01

    This report summarizes the approach that ORNL developed for screening a sample set of small coal stations for possible repowering with SMRs; the methodology employed, including spatial modeling; and initial results for these sample plants. The objective in conducting this type of siting evaluation is to demonstrate the capability to characterize specific sample coal plant sites to identify any particular issues associated with repowering existing coal stations with SMRs using OR-SAGE; it is not intended to be a definitive assessment per se as to the absolute suitability of any particular site.

  10. Despotism and risk of infanticide influence grizzly bear den-site selection.

    Science.gov (United States)

    Libal, Nathan S; Belant, Jerrold L; Leopold, Bruce D; Wang, Guiming; Owen, Patricia A

    2011-01-01

    Given documented social dominance and intraspecific predation in bear populations, the ideal despotic distribution model and sex hypothesis of sexual segregation predict adult female grizzly bears (Ursus arctos) will avoid areas occupied by adult males to reduce risk of infanticide. Under ideal despotic distribution, juveniles should similarly avoid adult males to reduce predation risk. Den-site selection and use is an important component of grizzly bear ecology and may be influenced by multiple factors, including risk from conspecifics. To test the role of predation risk and the sex hypothesis of sexual segregation, we compared adult female (n = 142), adult male (n = 36), and juvenile (n = 35) den locations in Denali National Park and Preserve, Alaska, USA. We measured elevation, aspect, slope, and dominant land cover for each den site, and used maximum entropy modeling to determine which variables best predicted den sites. We identified the global model as the best-fitting model for adult female (area under curve (AUC) = 0.926) and elevation as the best predictive variable for adult male (AUC = 0.880) den sites. The model containing land cover and elevation best-predicted juvenile (AUC = 0.841) den sites. Adult females spatially segregated from adult males, with dens characterized by higher elevations (mean= 1,412 m, SE = 52) and steeper slopes (mean = 21.9°, SE = 1.1) than adult male (elevation: mean = 1,209 m, SE = 76; slope: mean = 15.6°, SE = 1.9) den sites. Juveniles used a broad range of landscape attributes but did not avoid adult male denning areas. Observed spatial segregation by adult females supports the sex hypothesis of sexual segregation and we suggest is a mechanism to reduce risk of infanticide. Den site selection of adult males is likely related to distribution of food resources during spring.

  11. Guidelines for selecting codes for ground-water transport modeling of low-level waste burial sites. Executive summary

    International Nuclear Information System (INIS)

    Simmons, C.S.; Cole, C.R.

    1985-05-01

    This document was written to provide guidance to managers and site operators on how ground-water transport codes should be selected for assessing burial site performance. There is a need for a formal approach to selecting appropriate codes from the multitude of potentially useful ground-water transport codes that are currently available. Code selection is a problem that requires more than merely considering mathematical equation-solving methods. These guidelines are very general and flexible and are also meant for developing systems simulation models to be used to assess the environmental safety of low-level waste burial facilities. Code selection is only a single aspect of the overall objective of developing a systems simulation model for a burial site. The guidance given here is mainly directed toward applications-oriented users, but managers and site operators need to be familiar with this information to direct the development of scientifically credible and defensible transport assessment models. Some specific advice for managers and site operators on how to direct a modeling exercise is based on the following five steps: identify specific questions and study objectives; establish costs and schedules for achieving answers; enlist the aid of professional model applications group; decide on approach with applications group and guide code selection; and facilitate the availability of site-specific data. These five steps for managers/site operators are discussed in detail following an explanation of the nine systems model development steps, which are presented first to clarify what code selection entails

  12. Extended reviewing or the role of potential siting cantons in the ongoing Swiss site selection procedure ('Sectoral Plan')

    International Nuclear Information System (INIS)

    Flueeler, Thomas

    2014-01-01

    The disposition of nuclear waste in Switzerland has a long-standing and sinuous history reflecting its complex socio-technical nature (Flueeler, 2006). Upon the twofold failure to site a repository for low- and intermediate-level radioactive waste at Wellenberg during the 1990's and 2000's, it was recognised that the respective site selections had not been fully transparent. The Swiss government, the Federal Council, accepted the lesson and, after an extensive nationwide consultation at that, established a new site selection process 'from scratch': a systematic, stepwise, traceable, fair and binding procedure with a safety-first approach, yet extensively participatory. The so-called Sectoral Plan for Deep Geological Repositories guarantees the inclusion of the affected and concerned cantons and communities, as well as the relevant authorities in neighbouring countries from an early stage (Swiss Nuclear Energy Act, 2003; BFE, 2008). This contribution shares experience and insights in the ongoing procedure from a cantonal point of view that is an intermediate position between national needs and regional concerns, and with technical regulatory expertise between highly specialised experts and involved publics. (authors)

  13. Drift design methodology and preliminary application for the Yucca Mountain Site Characterization Project

    International Nuclear Information System (INIS)

    Hardy, M.P.; Bauer, S.J.

    1991-12-01

    Excavation stability in an underground nuclear waste repository is required during construction, emplacement, retrieval (if required), and closure phases to ensure worker health and safety, and to prevent development of potential pathways for radionuclide migration in the post-closure period. Stable excavations are developed by appropriate excavation procedures, design of the room shape, design and installation of rock support reinforcement systems, and implementation of appropriate monitoring and maintenance programs. In addition to the loads imposed by the in situ stress field, the repository drifts will be impacted by thermal loads developed after waste emplacement and, periodically, by seismic loads from naturally occurring earthquakes and underground nuclear events. A priori evaluation of stability is required for design of the ground support system, to confirm that the thermal loads are reasonable, and to support the license application process. In this report, a design methodology for assessing drift stability is presented. This is based on site conditions, together with empirical and analytical methods. Analytical numerical methods are emphasized at this time because empirical data are unavailable for excavations in welded tuff either at elevated temperatures or under seismic loads. The analytical methodology incorporates analysis of rock masses that are systematically jointed, randomly jointed, and sparsely jointed. In situ thermal and seismic loads are considered. Methods of evaluating the analytical results and estimating ground support requirements for all the full range of expected ground conditions are outlines. The results of a preliminary application of the methodology using the limited available data are presented. 26 figs., 55 tabs

  14. Process for selecting a site for Canada's deep geological repository for used nuclear fuel

    International Nuclear Information System (INIS)

    Facella, J.; Ben Belfadhel, M.; Patton, P.

    2012-01-01

    'Full Text:' The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management, the approach selected by the Government of Canada for long-term management of used nuclear fuel waste generated by Canadian nuclear reactors. The ultimate objective of Adaptive Phased Management is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable crystalline or sedimentary rock formation at a depth of about 500m. The repository will consist of a series of access and service shafts and a series of tunnels leading to placement rooms where used fuel will be placed and sealed in competent rock using a multi-barrier system which includes long lived specially designed containers, sealing materials such as bentonite and the rock itself. The used fuel will be monitored throughout all phases of implementation and will also remain retrievable for an extended period of time. In May 2010, the NWMO published the site selection process that serves as the road map to decision-making on the location for the deep geological repository. NWMO initiated the process with a first stage that invites communities to learn more about the project and the site selection process. NWMO is actively building awareness of the project and, on request of communities, is delivering briefings, supporting community capacity building and undertaking screenings of site suitability. This panel presentation provides a brief description of: Adaptive Phased Management including the deep geological repository which is its ultimate goal, and the design of the site selection process, and importantly the approach to assessing the suitability of sites from both a social and technical perspective. The panel presentation will be conducted in three parts: site selection process and engagement, Aboriginal engagement and Technical evaluations, followed by a discussion. The presentation will outline how NWMO sought

  15. A radioactive waste repository for Australia: methods for choosing the right site

    International Nuclear Information System (INIS)

    1992-01-01

    This study has developed and used an open and objective approach to site selection. A geographic information system was used to assemble continental-scale information. The information was classified according to suitability criteria and processed to show how the most suitable areas for locating Australia's radioactive waste repository can be identified. The test results show that different regions are identified when different selection criteria are used. The results in this discussion paper are indicative only and are intended to provide a focus for more detailed studies at regional and local levels following public comment on the criteria and methodology. The methodology for identifying a suitable site for a national repository for radioactive wastes will be re-applied with more detailed information to areas identified in this study and on the basis of public comments. 6 figs

  16. Air quality measurements for site characterization

    International Nuclear Information System (INIS)

    Carter, M.W.; Conklin, W.C.

    1982-01-01

    Effective and timely site characterization is an important part of selecting a site for low-level waste disposal. Parameters measured can be compared with pertinent regulatory requirements, used for a reference base, helpful in evaluating environmental impacts, utilized in documenting changes in control programs, of value in modeling studies and other data uses, and beneficial in providing relevant sampling and methodology training. This paper will focus on specific air quality measurements which should be an inherent part of the site characterization program. The program is designed to measure, quantify, and identify contributions from site uses (operational procedures), atmospheric fallout, natural radioactivity, and vicinity and regional applications of radionuclides. The recommended air quality measurements program will be described in association with a reference site developd by the US Nuclear Regulatory Commission. Particular attention will be devoted to the type and quality of information which is needed, the scope of sampling and measurements, the frequency of measurements, locations and numbers of sampling stations, the period of time needed for site characterization, and the proper uses of the information once it has been obtained. Adequate characterization of the site will be most important in final site selection and in the operation of the site as to periodically assessing environmental impacts and helping guide any remedial control efforts designed to meet regulatory requirements

  17. Comparison of the sanitary effects of energy chains. Methodological aspects

    International Nuclear Information System (INIS)

    Fagnani, F.

    1979-01-01

    Beyond technical and economical matters, the development of an industrial technology involves more or less numerous indirect consequences. From this viewpoint, the author analysis the methodological problems raised in evaluating the sanitary and ecological problems of the different energy-producing lines and considers successively the matter of technical interdependences, protection and safety regulations and selection of sites, classification of risks and measuring problems in relation to sanitary effects [fr

  18. Methodology for the elaboration of Natura 2000 sites designation acts in the Walloon Region (Belgium: calcareous grasslands in the Lesse-and-Lomme area

    Directory of Open Access Journals (Sweden)

    Mahy G.

    2005-01-01

    Full Text Available In the Walloon Region (Belgium, 239 sites have been selected to be included in the Natura 2000 network. The next step is to write designation acts in order to legally protect these 221,000 ha. In this pilot study, a designation act was elaborated for a Natura 2000 site of 2,569 ha and located in the Lesse-and-Lomme area within the Calestienne region. Although the site includes 40 ha of calcareous grasslands, characterised by an exceptional flora and fauna, this habitat is very threatened by abandonment and fragmentation.The methodology used to elaborate the designation act is presented with respect to calcareous grassland. Firstly, in spring and summer 2003, an accurate map of natural habitats was produced, with every single patch of calcareous grassland being mapped. Information was also collected in order to evaluate conservation status. Based on this information, conservation status was then assessed with respect to three different criteria: (1 integrity of the cortege species, (2 habitat structure and (3 degradations. Thirdly, the site was divided into objective zones according to the different habitats and species of Community interest found in the site. Hence, an objective zone was delineated for calcareous grasslands. This objective zone was then divided in several management units. Finally, at these different spatial levels (site, objective zone, management unit, management measures were suggested. As a result, in the draft designation act, the target is to maintain or restore 230 ha of calcareous grassland, instead of the existing 40 ha. This ambitious target requires large-scale restoration and an efficient grazing scheme. These will need important resources for their successful implementation

  19. Adaptive evolution of the spike gene of SARS coronavirus: changes in positively selected sites in different epidemic groups

    Directory of Open Access Journals (Sweden)

    He Shao-Heng

    2006-10-01

    Full Text Available Abstract Background It is believed that animal-to-human transmission of severe acute respiratory syndrome (SARS coronavirus (CoV is the cause of the SARS outbreak worldwide. The spike (S protein is one of the best characterized proteins of SARS-CoV, which plays a key role in SARS-CoV overcoming species barrier and accomplishing interspecies transmission from animals to humans, suggesting that it may be the major target of selective pressure. However, the process of adaptive evolution of S protein and the exact positively selected sites associated with this process remain unknown. Results By investigating the adaptive evolution of S protein, we identified twelve amino acid sites (75, 239, 244, 311, 479, 609, 613, 743, 765, 778, 1148, and 1163 in the S protein under positive selective pressure. Based on phylogenetic tree and epidemiological investigation, SARS outbreak was divided into three epidemic groups: 02–04 interspecies, 03-early-mid, and 03-late epidemic groups in the present study. Positive selection was detected in the first two groups, which represent the course of SARS-CoV interspecies transmission and of viral adaptation to human host, respectively. In contrast, purifying selection was detected in 03-late group. These indicate that S protein experiences variable positive selective pressures before reaching stabilization. A total of 25 sites in 02–04 interspecies epidemic group and 16 sites in 03-early-mid epidemic group were identified under positive selection. The identified sites were different between these two groups except for site 239, which suggests that positively selected sites are changeable between groups. Moreover, it was showed that a larger proportion (24% of positively selected sites was located in receptor-binding domain (RBD than in heptad repeat (HR1-HR2 region in 02–04 interspecies epidemic group (p = 0.0208, and a greater percentage (25% of these sites occurred in HR1–HR2 region than in RBD in 03-early

  20. Wind data for wind driven plant. [site selection for optimal performance

    Science.gov (United States)

    Stodhart, A. H.

    1973-01-01

    Simple, averaged wind velocity data provide information on energy availability, facilitate generator site selection and enable appropriate operating ranges to be established for windpowered plants. They also provide a basis for the prediction of extreme wind speeds.

  1. Region-to-area screening methodology for the Crystalline Repository Project

    International Nuclear Information System (INIS)

    1985-04-01

    The purpose of this document is to describe the Crystalline Repository Project's (CRP) process for region-to-area screening of exposed and near-surface crystalline rock bodies in the three regions of the conterminous United States where crystalline rock is being evaluated as a potential host for the second nuclear waste repository (i.e., in the North Central, Northeastern, and Southeastern Regions). This document indicates how the US Department of Energy's (DOE) General Guidelines for the Recommendation of Sites for Nuclear Waste Repositories (10 CFR 960) were used to select and apply factors and variables for the region-to-area screening, explains how these factors and variable are to be applied in the region-to-area screening, and indicates how this methodology relates to the decision process leading to the selection of candidate areas. A brief general discussion of the screening process from the national survey through area screening and site recommendation is presented. This discussion sets the scene for detailed discussions which follow concerning the region-to-area screening process, the guidance provided by the DOE Siting Guidelines for establishing disqualifying factors and variables for screening, and application of the disqualifying factors and variables in the screening process. This document is complementary to the regional geologic and environmental characterization reports to be issued in the summer of 1985 as final documents. These reports will contain the geologic and environmental data base that will be used in conjunction with the methodology to conduct region-to-area screening

  2. Tuning a Protein-Labeling Reaction to Achieve Highly Site Selective Lysine Conjugation.

    Science.gov (United States)

    Pham, Grace H; Ou, Weijia; Bursulaya, Badry; DiDonato, Michael; Herath, Ananda; Jin, Yunho; Hao, Xueshi; Loren, Jon; Spraggon, Glen; Brock, Ansgar; Uno, Tetsuo; Geierstanger, Bernhard H; Cellitti, Susan E

    2018-04-16

    Activated esters are widely used to label proteins at lysine side chains and N termini. These reagents are useful for labeling virtually any protein, but robust reactivity toward primary amines generally precludes site-selective modification. In a unique case, fluorophenyl esters are shown to preferentially label human kappa antibodies at a single lysine (Lys188) within the light-chain constant domain. Neighboring residues His189 and Asp151 contribute to the accelerated rate of labeling at Lys188 relative to the ≈40 other lysine sites. Enriched Lys188 labeling can be enhanced from 50-70 % to >95 % by any of these approaches: lowering reaction temperature, applying flow chemistry, or mutagenesis of specific residues in the surrounding protein environment. Our results demonstrated that activated esters with fluoro-substituted aromatic leaving groups, including a fluoronaphthyl ester, can be generally useful reagents for site-selective lysine labeling of antibodies and other immunoglobulin-type proteins. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Influence of olfactory and visual cover on nest site selection and nest success for grassland-nesting birds.

    Science.gov (United States)

    Fogarty, Dillon T; Elmore, R Dwayne; Fuhlendorf, Samuel D; Loss, Scott R

    2017-08-01

    Habitat selection by animals is influenced by and mitigates the effects of predation and environmental extremes. For birds, nest site selection is crucial to offspring production because nests are exposed to extreme weather and predation pressure. Predators that forage using olfaction often dominate nest predator communities; therefore, factors that influence olfactory detection (e.g., airflow and weather variables, including turbulence and moisture) should influence nest site selection and survival. However, few studies have assessed the importance of olfactory cover for habitat selection and survival. We assessed whether ground-nesting birds select nest sites based on visual and/or olfactory cover. Additionally, we assessed the importance of visual cover and airflow and weather variables associated with olfactory cover in influencing nest survival. In managed grasslands in Oklahoma, USA, we monitored nests of Northern Bobwhite ( Colinus virginianus ), Eastern Meadowlark ( Sturnella magna ), and Grasshopper Sparrow ( Ammodramus savannarum ) during 2015 and 2016. To assess nest site selection, we compared cover variables between nests and random points. To assess factors influencing nest survival, we used visual cover and olfactory-related measurements (i.e., airflow and weather variables) to model daily nest survival. For nest site selection, nest sites had greater overhead visual cover than random points, but no other significant differences were found. Weather variables hypothesized to influence olfactory detection, specifically precipitation and relative humidity, were the best predictors of and were positively related to daily nest survival. Selection for overhead cover likely contributed to mitigation of thermal extremes and possibly reduced detectability of nests. For daily nest survival, we hypothesize that major nest predators focused on prey other than the monitored species' nests during high moisture conditions, thus increasing nest survival on these

  4. Methodology for geometric modelling. Presentation and administration of site descriptive models; Metodik foer geometrisk modellering. Presentation och administration av platsbeskrivande modeller

    Energy Technology Data Exchange (ETDEWEB)

    Munier, Raymond [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hermanson, Jan [Golder Associates (Sweden)

    2001-03-01

    This report presents a methodology to construct, visualise and present geoscientific descriptive models based on data from the site investigations, which the SKB currently performs, to build an underground nuclear waste disposal facility in Sweden. It is designed for interaction with SICADA (SKB:s site characterisation database) and RVS (SKB:s Rock Visualisation System). However, the concepts of the methodology are general and can be used with other tools capable of handling 3D geometries and parameters. The descriptive model is intended to be an instrument where site investigation data from all disciplines are put together to form a comprehensive visual interpretation of the studied rock mass. The methodology has four main components: 1. Construction of a geometrical model of the interpreted main structures at the site. 2. Description of the geoscientific characteristics of the structures. 3. Description and geometrical implementation of the geometric uncertainties in the interpreted model structures. 4. Quality system for the handling of the geometrical model, its associated database and some aspects of the technical auditing. The geometrical model forms a basis for understanding the main elements and structures of the investigated site. Once the interpreted geometries are in place in the model, the system allows for adding descriptive and quantitative data to each modelled object through a system of intuitive menus. The associated database allows each geometrical object a complete quantitative description of all geoscientific disciplines, variabilities, uncertainties in interpretation and full version history. The complete geometrical model and its associated database of object descriptions are to be recorded in a central quality system. Official, new and old versions of the model are administered centrally in order to have complete quality assurance of each step in the interpretation process. The descriptive model is a cornerstone in the understanding of the

  5. Model of the best-of-N nest-site selection process in honeybees

    Science.gov (United States)

    Reina, Andreagiovanni; Marshall, James A. R.; Trianni, Vito; Bose, Thomas

    2017-05-01

    The ability of a honeybee swarm to select the best nest site plays a fundamental role in determining the future colony's fitness. To date, the nest-site selection process has mostly been modeled and theoretically analyzed for the case of binary decisions. However, when the number of alternative nests is larger than two, the decision-process dynamics qualitatively change. In this work, we extend previous analyses of a value-sensitive decision-making mechanism to a decision process among N nests. First, we present the decision-making dynamics in the symmetric case of N equal-quality nests. Then, we generalize our findings to a best-of-N decision scenario with one superior nest and N -1 inferior nests, previously studied empirically in bees and ants. Whereas previous binary models highlighted the crucial role of inhibitory stop-signaling, the key parameter in our new analysis is the relative time invested by swarm members in individual discovery and in signaling behaviors. Our new analysis reveals conflicting pressures on this ratio in symmetric and best-of-N decisions, which could be solved through a time-dependent signaling strategy. Additionally, our analysis suggests how ecological factors determining the density of suitable nest sites may have led to selective pressures for an optimal stable signaling ratio.

  6. The Methodology of Selecting the Transport Mode for Companies on the Slovak Transport Market

    Science.gov (United States)

    Černá, Lenka; Zitrický, Vladislav; Daniš, Jozef

    2017-03-01

    Transport volume in the Slovak Republic is growing continuously every year. This rising trend is influenced by the development of car industry and its suppliers. Slovak republic has also a geographic strategy position in middle Europe from the side of transport corridors (east-west and north-south). The development of transport volume in freight transport depends on the transport and business processes between the European Union and China and it is an opportunity for Slovak republic to obtain transit transport flows. In the Slovak Republic, road transport has a dominant position in the transport market. The volume of road transport has gradually increased over the past years. The increase of road transport is reflected on the highways and speed roads in regions which have higher economic potential. The increase of rail transport as seen on the main rail corridors is not as significant as in road transport. Trade globalization also has an influence on the increase of transport volume in intermodal transport. Predicted increase in transport volume for this transport mode is from 2,3 mil ton per year at present to 8 mil ton in the year 2020. Selection of transport mode and carrier is an important aspect for logistic management, because companies (customers) want to reduce the number of carriers which they trade and they create the system of several key carriers. Bigger transport volume and more qualitative transport service give a possibility to reduce transport costs. This trend is positive for carriers too, because the carriers can focus only on the selected customers and provide more qualitative services. The paper is focused on the selection of transport mode based on the proposed methodology. The aims of the paper are, definition of criteria which directly influence the selection of transport modes, determination of criteria based on the subjectively methods, creation of process for the selection of transport modes and practical application of proposed

  7. SSC [Superconducting Super Collider] site evaluations

    International Nuclear Information System (INIS)

    1988-11-01

    With this report, the SSC Site Task Force forwards to the Director, Office of Energy Research, US Department of Energy (DOE), its evaluation of the technical criteria and life-cycle costs for the proposed SSC sites judged to be the best qualified. The criteria against which each site was evaluated are those set forth in the Invitation for Site Proposals for the Superconducting Super Collider (DOE/ER-0315) (Invitation) which was prepared by the Task Force and issued in April 1987. The methodology followed by the Task Force in this report and in all other phases of the proposal evaluation has been consistent with the SSC site selection process approved by DOE's Energy System Acquisition Advisory Board (ESAAB). The goal of the site selection process is to identify a site that will permit the highest level of research productivity and overall effectiveness of the SSC at a reasonable cost of construction and operation and with minimial impact on the environment. The Task Force acknowledges that all seven sites are, indeed, highly qualified locations for the construction and operation of the SSC on the basis of technical and cost considerations. In performing its evaluation, which is presented in this paper, the Task Force took an in-depth look at each site on the basis of site visits and extensive technical analyses. A consensus rating for each technical evaluation criterion and subcriterion was developed for each site

  8. Use of strategic environmental assessment in the site selection process for a radioactive waste disposal facility in Slovenia.

    Science.gov (United States)

    Dermol, Urška; Kontić, Branko

    2011-01-01

    The benefits of strategic environmental considerations in the process of siting a repository for low- and intermediate-level radioactive waste (LILW) are presented. The benefits have been explored by analyzing differences between the two site selection processes. One is a so-called official site selection process, which is implemented by the Agency for radwaste management (ARAO); the other is an optimization process suggested by experts working in the area of environmental impact assessment (EIA) and land-use (spatial) planning. The criteria on which the comparison of the results of the two site selection processes has been based are spatial organization, environmental impact, safety in terms of potential exposure of the population to radioactivity released from the repository, and feasibility of the repository from the technical, financial/economic and social point of view (the latter relates to consent by the local community for siting the repository). The site selection processes have been compared with the support of the decision expert system named DEX. The results of the comparison indicate that the sites selected by ARAO meet fewer suitability criteria than those identified by applying strategic environmental considerations in the framework of the optimization process. This result stands when taking into account spatial, environmental, safety and technical feasibility points of view. Acceptability of a site by a local community could not have been tested, since the formal site selection process has not yet been concluded; this remains as an uncertain and open point of the comparison. Copyright © 2010 Elsevier Ltd. All rights reserved.

  9. Spotted owl roost and nest site selection in northwestern California

    Science.gov (United States)

    J.A. Blakesley; A.B. Franklin; R.J. Gutierrez

    1992-01-01

    We directly observed roost and nest site selection in a population of northern spotted owls (Strix occidentalis caurina) in northwestern California during 1985-89. Because of potential biases caused by use of radio telemetry in previous studies, we examined habitat use relative to habitat availability at a level not previously reported for spotted...

  10. Geological factors of disposal site selection for low-and intermediate-level solid radwastes in China

    International Nuclear Information System (INIS)

    Chen Zhangru

    1993-01-01

    For disposal of low- and intermediate-level solid radioactive wastes, shallow-ground disposal can provide adequate isolation of waste from human for a fairly long period of time. The objective of disposal site selection is to ensure that the natural properties of the site together with the engineered barrier site shall provide adequate isolation of radionuclides from the human beings and environment, so the whole disposal system can keep the radiological impact within an acceptable level. Since the early 1980's, complying with the national standards and the expert's conception as well as the related IAEA Criteria, geological selection of disposal sites for low-and intermediate-level solid radwastes has been carried out in East China, South China, Northwest China and Southwest China separately. Finally, 5 candidate sites were recommended to the CNNC

  11. The search for a storage site for low-level and long-life wastes. December 2008 report

    International Nuclear Information System (INIS)

    2008-01-01

    After having recalled the methodology and approach implemented for the search and selection of radioactive waste storage sites, this report proposes a brief synthesis of contacts taken during the call for candidates. It comments the results of this call, describes the project technical constraints (waste inventory, studied solutions, graphite and radiferous wastes, programmed investigations on preselected sites), gives the results of the geological analysis (methodology, geological context, site ranking), of the environmental analysis (context and principles, collected information), and of the socio-economic analysis of the candidate sites. The last chapter discusses the identification of possible preselected sites. Some more detailed information are available in appendix: candidate list, geological sheets and maps, environmental and socio-economic analysis of candidate towns or districts

  12. Cap stabilization for reclaimed uranium sites

    International Nuclear Information System (INIS)

    Abt, S.R.; Nelson, J.D.; Johnson, T.L.; Hawkins, E.F.

    1989-01-01

    The reclamation and stabilization of uranium-mill tailings sites requires engineering designs to protect against the disruption of tailings and the potential release of radioactive materials. The reclamation design is to be effective for 200-1000 years. This paper presents recently developed or refined techniques and methodologies used to evaluate uranium-tailings-reclamation plans designed to provide long-term stability against failure modes. Specific cap-design aspects presented include design flood selection, influence of fluvial geomorphology on site stabilization, stable slope prediction, slope stabilization using riprap, and riprap selection relative to rock quality and durability. Design relationships are presented for estimating flow through riprap, sizing riprap, and estimating riprap flow resistance for overtopping conditions. Guidelines for riprap-layer thickness and gradation are presented. A riprap-rating procedure for estimating rock quality and durability is also presented

  13. The evaluation of effective criteria on site selection for energy production units from cellulosic biomass in Iran

    Directory of Open Access Journals (Sweden)

    Majid Azizi

    2017-12-01

    Full Text Available Both Analytical Hierarchy Process (AHP and benefits, opportunities, costs and risks (BOCR techniques were used successfully to evaluate the effective criteria on site selection for energy production unit development from cellulosic biomass in Iran. The results showed that the benefits criteria was at the first level while the initial cellulosic raw materials and opportunities with the aim of the local economy had the second position as the most important indices on site selection. In addition, third criterion has been introduced for the costs criteria (transportation cost and social barriers by the experts. However, risks criteria which referred to instability of providing cellulosic raw materials is one of the less important effective indices on site selection to make energy production unit. The results illustrated that the economy and politics as two environmental effective factors affected on the site selection process generally.

  14. Assessment of land suitability for olive mill wastewater disposal site selection by integrating fuzzy logic, AHP, and WLC in a GIS.

    Science.gov (United States)

    Aydi, Abdelwaheb; Abichou, Tarek; Nasr, Imen Hamdi; Louati, Mourad; Zairi, Moncef

    2016-01-01

    This paper presents a geographic information system-based multi-criteria site selection tool of an olive mill wastewater (OMW) disposal site in Sidi Bouzid Region, Tunisia. The multi-criteria decision framework integrates ten constraints and six factors that relate to environmental and economic concerns, and builds a hierarchy model for OMW disposal site suitability. The methodology is used for preliminary assessment of the most suitable OMW disposal sites by combining fuzzy set theory and analytic hierarchy process (AHP). The fuzzy set theory is used to standardize factors using different fuzzy membership functions while the AHP is used to establish the relative importance of the criteria. The AHP makes pairwise comparisons of relative importance between hierarchy elements grouped by both environmental and economic decision criteria. The OMW disposal site suitability is achieved by applying a weighted linear combination that uses a comparison matrix to aggregate different importance scenarios associated with environmental and economic objectives. Three different scenarios generated by different weights applied to the two objectives. The scenario (a) assigns a weight of 0.75 to the environmental and 0.25 to the economic objective, scenario (b) has equal weights, and scenario (c) features weights of 0.25 and 0.75 for environmental and economic objectives, respectively. The results from this study assign the least suitable OMW disposal site of 2.5 % when environmental and economic objectives are rated equally, while a more suitable OMW disposal site of 1.0 % is generated when the economic objective is rated higher.

  15. Survey of siting practices for selected management projects in seven countries

    International Nuclear Information System (INIS)

    Hardin, E.; Aahagen, H.

    1992-06-01

    This paper surveys siting practices for deep geologic disposal in seven countries, and attempts to formulate generalizations which could be useful for the upcoming review of the Swedish plan for siting the SFL repository (R and D 92). Comparison of projects in different countries is done with full appreciation of the technical, legal, and cultural differences. The seven countries were selected for experience with siting in crystalline rock, similarity of siting practices to Sweden, and the availability of published information. Local governments have demonstrated effective veto power in each of the seven countries surveyed, although this power is exercised in different ways. This paper shows how the siting strategy itself affects the ability and the inclination of localities to block the project. It shows by example that public involvement, parallel vs. sequential characterization, schedule for siting activities, and the existence of interim waste storage capability have an impact on the success of siting. The focus of this paper is deep geologic disposal. Shallow land disposal and non-radioactive wastes are not discussed in detail, with three exceptions: LLW disposal siting in the U.S. and Canada, and the SAKAB incinerator projects in Sweden. These provide insight into siting approaches and demonstrate that conclusions regarding deep geologic disposal are supported by other experience. (114 refs.) (au)

  16. Geological Consideration for the Site Selection of Radioactive Waste at the PPTN Serpong Area

    International Nuclear Information System (INIS)

    Sucipta

    2002-01-01

    Geological consideration is a main aspect in the exploration or selection of site for radioactive waste repository, because, really that repository site must be surrounded by geological system (geosphere). The objective of the site selection is to obtain a site which geologically capable to prevent the escape of waste pollution from repository to biosphere. Beside that the site must be free from geological processes which harmfull to longterm stability of the site. Descriptive analysis method was applied in this research and combined with evaluation by scoring methods. From the analysis result could be identified that PPTN Serpong morphologically consist of undulatory plains (elevation 80-100 m above msl), the lithology are alluvial deposits. Quarternary tuffs, pumiceous tuffs, clayey tuffs. sandy tuffs and limestone. The geological structure was supposed a horst and graben which buried more than 15 m since Pleistocene. Hydrological condition are moderately run-off, and the distance to the river is about 160 m. The depth of groundwater is 8.3 m, with parallel drainage system. Geological resources found in the site are land and groundwater. The most potential of geological hazard is supposed a rock mass movement. By the land evaluation could be concluded that PPTN Serpong area have moderate suitability for NSD site. (author)

  17. Nuclear site selection and environmental protection. The decision making methods

    International Nuclear Information System (INIS)

    Bresson, G.; Lacourly, G.; Fitoussi, L.

    1975-01-01

    The selection of the site of a nuclear plant most often comes to seek out and compound between two trends: that of the operator who will try and reduce the cost price of his product to the lowest and that of the protectionist who will try and reduce to the minimum the hazards resulting from the plant operation. Such a compromise is the result of a more or less empirical choice, which enters within the frame of a cost-benefit analysis, in which theoretically, the choice between several possible solutions is made of the selection giving the higher advantage [fr

  18. Key Determinant Derivations for Information Technology Disaster Recovery Site Selection by the Multi-Criterion Decision Making Method

    Directory of Open Access Journals (Sweden)

    Chia-Lee Yang

    2015-05-01

    Full Text Available Disaster recovery sites are an important mechanism in continuous IT system operations. Such mechanisms can sustain IT availability and reduce business losses during natural or human-made disasters. Concerning the cost and risk aspects, the IT disaster-recovery site selection problems are multi-criterion decision making (MCDM problems in nature. For such problems, the decision aspects include the availability of the service, recovery time requirements, service performance, and more. The importance and complexities of IT disaster recovery sites increases with advances in IT and the categories of possible disasters. The modern IT disaster recovery site selection process requires further investigation. However, very few researchers tried to study related issues during past years based on the authors’ extremely limited knowledge. Thus, this paper aims to derive the aspects and criteria for evaluating and selecting a modern IT disaster recovery site. A hybrid MCDM framework consisting of the Decision Making Trial and Evaluation Laboratory (DEMATEL and the Analytic Network Process (ANP will be proposed to construct the complex influence relations between aspects as well as criteria and further, derive weight associated with each aspect and criteria. The criteria with higher weight can be used for evaluating and selecting the most suitable IT disaster recovery sites. In the future, the proposed analytic framework can be used for evaluating and selecting a disaster recovery site for data centers by public institutes or private firms.

  19. Environmental impact statement analysis: dose methodology

    International Nuclear Information System (INIS)

    Mueller, M.A.; Strenge, D.L.; Napier, B.A.

    1981-01-01

    Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

  20. Integrated methodology for the evaluation of the vulnerability of archaeological sites: the Roman Theater of Verona

    International Nuclear Information System (INIS)

    Cescatti, Elvis; Lorenzoni, Filippo; Caldon, Mauro; Modena, Claudio; Da Porto, Francesca

    2016-01-01

    The knowledge-based methodologies for assessing the structural safety and vulnerability of historical buildings are based on the application of an operational approach that is divided into several phases including historical research, the execution of non-destructive or moderately destructive investigations, monitoring and structural analysis. Monitoring is a useful tool to be used throughout the whole process of knowledge not only in the preliminary diagnosis, but also for the control of the quality and effectiveness of the interventions, in the context of appropriate conservation programs e protection of the object being studied. From this point of view, monitoring becomes essential for: (i) the evaluation of the real structural behavior and the identification of vulnerabilities, prior to the execution of any intervention; (ii) minimization and optimization of interventions, firstly by providing indications regarding those that are not necessary and / or invasive. This methodology has been recently applied and valid from the authors to an archaeological site of particular relevance: the Roman Theater of Verona. The deepening of the knowledge phase (historical analysis, survey, study of the subsoil, properties of materials), combined with the installation of a permanent monitoring system and the structural modeling, allowed to obtain a reliable assessment of the site's vulnerabilities with the aim of guaranteeing in an effective and careful protection and enhancement.

  1. Suggestions on selection of clay site as a key alternative of underground repository for HLW geological disposal in China

    International Nuclear Information System (INIS)

    Zheng Hualing; Fu Bingjun; Fan Xianhua; Chen Shi; Sun Donghui

    2006-01-01

    Site selection for the underground repository is a vital problem with respect to the HLW geological disposal. Over the past decades, we have been focusing our attention on granite as a priority in China. However, there are some problems have to be discussed on this matter. In this paper, both experiences gained and lessons learned in the international community regarding the site selection are described. And then, after analyzing a lot of some key factors affecting the site selection, some comments and suggestions on selection of clay site as a key alternative before final decision making in China are presented. (authors)

  2. Development of a methodology for post closure radiological risk analysis of underground waste repositories. Illustrative assessment of the Harwell site. V.1

    International Nuclear Information System (INIS)

    Gralewski, Z.A.; Kane, P.; Nicholls, D.B.

    1987-06-01

    A probabilistic risk analysis (pra) is demonstrated for a number of ground water mediated release scenarios at the Harwell Site for a hypothetical repository at a depth of about 150 metres. This is the second stage of development of an overall risk assessment methodology. A procedure for carrying out multi-scenario assessment using available probabilistic risk assessment (pra) models is presented and a general methodology for combining risk contributions is outlined. Appropriate levels of model complexity in pra are discussed. Modelling requirements for the treatment of multiple simultaneous pathways and of site evolution are outlined. Further developments of pra systems are required to increase the realism of both the models and their mode of application, and hence to improve estimates of risk. (author)

  3. A note on “An alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems”

    OpenAIRE

    R. Venkata Rao

    2012-01-01

    A paper published by Maniya and Bhatt (2011) (An alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems, Computers & Industrial Engineering, 61, 542-549) proposed an alternative multiple attribute decision making method named as “Preference Selection Index (PSI) method” for selection of an optimal facility layout design. The authors had claimed that the method was logical and more appropriate and the method gives directly the o...

  4. A grey-based group decision-making methodology for the selection of hydrogen technologiess in Life Cycle Sustainability perspective

    DEFF Research Database (Denmark)

    Manzardo, Alessandro; Ren, Jingzheng; Mazzi, Anna

    2012-01-01

    The objective of this research is to develop a grey-based group decision-making methodology for the selection of the best renewable energy technology (including hydrogen) using a life cycle sustainability perspective. The traditional grey relational analysis has been modified to better address...... the issue of uncertainty. The proposed methodology allows multi-person to participate in the decision-making process and to give linguistic evaluation on the weights of the criteria and the performance of the alternative technologies. In this paper, twelve hydrogen production technologies have been assessed...... using the proposed methodology, electrolysis of water technology by hydropower has been considered to be the best technology for hydrogen production according to the decision-making group....

  5. Site selective excitation of Eu 3+ ions in the lanthanum squarate

    International Nuclear Information System (INIS)

    Piriou, B.; Petit, J.F.; Trombe, J.C.; Gleizes, A.

    1989-01-01

    Microcrystalline powder of La 2 (H 2 0) 11 (C 4 0 4 ) 3 . 2H 2 0 doped with 2.5 % Eu 3+ was studied at 77K. The site selective excitation in the 5 D 2 sub-levels and the time resolved spectroscopy were needed to distinguish very similar sites, in the structure with very closely spaced (2 cm -1 ) 5 D 0 levels. Two sites without symmetry were characterized in agreement with the structure. The presence of a minority third one is supposed to be due to the large concentration of the doping europium. The energy of all the Stark components of 7 F 1 7 F 2 5 D 0 and 5 D 2 are given. The sets of the energy levels of each site are very similar. This corresponds to the accidental identity of the coordination polyedron of inequivalent sites and shows the weak contribution to the crystalline field due to the second and farther neighbours. The spectra are correlated to the sites on the criterion of the 5 D 0 life time, 142 and 130 μs for the sites having respectively five and six water molecules [fr

  6. Methodology for the integral comparison of nuclear reactors: selecting a reactor for Mexico

    International Nuclear Information System (INIS)

    Reyes R, R.; Martin del Campo M, C.

    2006-01-01

    In this work it was built a methodology to compare nuclear reactors of third generation that can be contemplated for future electric planning in Mexico. This methodology understands the selection of the reactors to evaluate eliminating the reactors that still are not sufficiently mature at this time of the study. A general description of each reactor together with their main ones characteristic is made. It was carried out a study for to select the group of parameters that can serve as evaluation indicators, which are the characteristics of the reactors with specific values for each considered technology, and it was elaborated an evaluation matrix indicators including the reactors in the columns and those indicators in the lines. Since that none reactor is the best in all the indicators were necessary to use a methodology for multi criteria taking decisions that we are presented. It was used the 'Fuzzy Logic' technique, the which is based in those denominated diffuse groups and in a system of diffuse inference based on heuristic rules in the way 'If Then consequence> ', where the linguistic values of the condition and of the consequence is defined by diffuse groups, it is as well as the rules always they transform a diffuse group into another. Later on they combine all the diffuse outputs to create a single output and an inverse transformation is made that it transfers the output from the diffuse domain to the real one. They were carried out two studies one with the entirety of the indicators and another in which the indicators were classified in three approaches: the first one refers to indicators related with the planning of the plants inside the context of the general electric sector, the second approach includes indicators related with the characteristics of the fuel and the third it considers indicators related with the acting of the plant in safety and environmental impact. This second study allowed us to know the qualities of each reactor in each one of the

  7. Despotism and risk of infanticide influence grizzly bear den-site selection.

    Directory of Open Access Journals (Sweden)

    Nathan S Libal

    Full Text Available Given documented social dominance and intraspecific predation in bear populations, the ideal despotic distribution model and sex hypothesis of sexual segregation predict adult female grizzly bears (Ursus arctos will avoid areas occupied by adult males to reduce risk of infanticide. Under ideal despotic distribution, juveniles should similarly avoid adult males to reduce predation risk. Den-site selection and use is an important component of grizzly bear ecology and may be influenced by multiple factors, including risk from conspecifics. To test the role of predation risk and the sex hypothesis of sexual segregation, we compared adult female (n = 142, adult male (n = 36, and juvenile (n = 35 den locations in Denali National Park and Preserve, Alaska, USA. We measured elevation, aspect, slope, and dominant land cover for each den site, and used maximum entropy modeling to determine which variables best predicted den sites. We identified the global model as the best-fitting model for adult female (area under curve (AUC = 0.926 and elevation as the best predictive variable for adult male (AUC = 0.880 den sites. The model containing land cover and elevation best-predicted juvenile (AUC = 0.841 den sites. Adult females spatially segregated from adult males, with dens characterized by higher elevations (mean= 1,412 m, SE = 52 and steeper slopes (mean = 21.9°, SE = 1.1 than adult male (elevation: mean = 1,209 m, SE = 76; slope: mean = 15.6°, SE = 1.9 den sites. Juveniles used a broad range of landscape attributes but did not avoid adult male denning areas. Observed spatial segregation by adult females supports the sex hypothesis of sexual segregation and we suggest is a mechanism to reduce risk of infanticide. Den site selection of adult males is likely related to distribution of food resources during spring.

  8. Selection of skin dose calculation methodologies

    International Nuclear Information System (INIS)

    Farrell, W.E.

    1987-01-01

    This paper reports that good health physics practice dictates that a dose assessment be performed for any significant skin contamination incident. There are, however, several methodologies that could be used, and while there is probably o single methodology that is proper for all cases of skin contamination, some are clearly more appropriate than others. This can be demonstrated by examining two of the more distinctly different options available for estimating skin dose the calculational methods. The methods compiled by Healy require separate beta and gamma calculations. The beta calculational method is the derived by Loevinger, while the gamma dose is calculated from the equation for dose rate from an infinite plane source with an absorber between the source and the detector. Healy has provided these formulas in graphical form to facilitate rapid dose rate determinations at density thicknesses of 7 and 20 mg/cm 2 . These density thicknesses equate to the regulatory definition of the sensitive layer of the skin and a more arbitrary value to account of beta absorption in contaminated clothing

  9. Site selection and evaluation for nuclear power plants with respect to population distribution

    International Nuclear Information System (INIS)

    1980-01-01

    This safety guide, relating population distribution to site selection and evaluation, for nuclear power plants, forms part of the IAEA's programme, referred to as the NUSS programme (Nuclear Safety Standards). The guide presents population distribution data, requirements, examples of site screening methods, and an overview of radiological impact assessment with respect to population distribution

  10. An evaluation of contaminated estuarine sites using sediment quality guidelines and ecological assessment methodologies.

    Science.gov (United States)

    Fulton, M; Key, P; Wirth, E; Leight, A K; Daugomah, J; Bearden, D; Sivertsen, S; Scott, G

    2006-10-01

    Toxic contaminants may enter estuarine ecosystems through a variety of pathways. When sediment contaminant levels become sufficiently high, they may impact resident biota. One approach to predict sediment-associated toxicity in estuarine ecosystems involves the use of sediment quality guidelines (ERMs, ERLs) and site-specific contaminant chemistry while a second approach utilizes site-specific ecological sampling to assess impacts at the population or community level. The goal of this study was to utilize an integrated approach including chemical contaminant analysis, sediment quality guidelines and grass shrimp population monitoring to evaluate the impact of contaminants from industrial sources. Three impacted sites and one reference site were selected for study. Grass shrimp populations were sampled using a push-netting approach. Sediment samples were collected at each site and analyzed for metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides. Contaminant levels were then compared to sediment quality guidelines. In general, grass shrimp population densities at the sites decreased as the ERM quotients increased. Grass shrimp densities were significantly reduced at the impacted site that had an ERM exceedance for chromium and the highest Mean ERM quotient. Regression analysis indicated that sediment chromium concentrations were negatively correlated with grass shrimp density. Grass shrimp size was reduced at two sites with intermediate levels of contamination. These findings support the use of both sediment quality guidelines and site-specific population monitoring to evaluate the impacts of sediment-associated contaminants in estuarine systems.

  11. Can multi-criteria analysis models support the site selection for a repository for heat-generating waste?; Koennen multikriterielle Analysemodelle die Standortauswahl fuer ein Endlager fuer Waerme entwickelnde Abfaelle unterstuetzen?

    Energy Technology Data Exchange (ETDEWEB)

    Gutberlet, Daniela [DMT GmbH und Co.KG, Essen (Germany). Geschaeftsentwicklung Nukleare Entsorgung

    2015-07-01

    The decision for or against a potential site for a nuclear waste repository is highly complex and requires decision-makers to consider multiple assessment criteria. The complexity of each site and its characteristics, and the differing opinions among members of the public and advocacy groups mean t hat conflicts of interest are likely to arise. In this paper, the author suggests that multi-criteria analysis models could be used to provide methodological support during the selection process. The models can map these types of decision situations and suggest coherent solutions with relatively little formal effort. They allow users to compare different opt ions simultaneously and ensure that t heir decision-making Is conscious rather than arbitrary.

  12. Developing "Personality" Taxonomies: Metatheoretical and Methodological Rationales Underlying Selection Approaches, Methods of Data Generation and Reduction Principles.

    Science.gov (United States)

    Uher, Jana

    2015-12-01

    Taxonomic "personality" models are widely used in research and applied fields. This article applies the Transdisciplinary Philosophy-of-Science Paradigm for Research on Individuals (TPS-Paradigm) to scrutinise the three methodological steps that are required for developing comprehensive "personality" taxonomies: 1) the approaches used to select the phenomena and events to be studied, 2) the methods used to generate data about the selected phenomena and events and 3) the reduction principles used to extract the "most important" individual-specific variations for constructing "personality" taxonomies. Analyses of some currently popular taxonomies reveal frequent mismatches between the researchers' explicit and implicit metatheories about "personality" and the abilities of previous methodologies to capture the particular kinds of phenomena toward which they are targeted. Serious deficiencies that preclude scientific quantifications are identified in standardised questionnaires, psychology's established standard method of investigation. These mismatches and deficiencies derive from the lack of an explicit formulation and critical reflection on the philosophical and metatheoretical assumptions being made by scientists and from the established practice of radically matching the methodological tools to researchers' preconceived ideas and to pre-existing statistical theories rather than to the particular phenomena and individuals under study. These findings raise serious doubts about the ability of previous taxonomies to appropriately and comprehensively reflect the phenomena towards which they are targeted and the structures of individual-specificity occurring in them. The article elaborates and illustrates with empirical examples methodological principles that allow researchers to appropriately meet the metatheoretical requirements and that are suitable for comprehensively exploring individuals' "personality".

  13. Using Improved Entropy-Cloud Model to Select High-Speed Railway Express Freight Train Service Sites

    Directory of Open Access Journals (Sweden)

    Wencheng Huang

    2017-01-01

    Full Text Available High-speed railway (HSR express freight train service sites selection is critical to the development of China’s Third Party Logistics market. In this paper, we formulate an improved entropy-cloud model based approach to solve the HSR express sites selection problem for the first time. The basic data of the indicators, for example, existing railway network conditions, traffic environment, express freight market demand, and policy, will be used as the inputs. We apply improved entropy method to obtain each subindicator’s weight. The cloud model will be used to select and classify each station under evaluation.

  14. Hot Spots on the Web for Teacher Librarians: A Selection of Recommended Web Sites for TLs To Visit.

    Science.gov (United States)

    1996

    Six papers review and recommend sites on the Web as resources for teacher librarians include: "Just Do It: A Guide to Getting Out There and Doing It Yourself" (Catherine Ryan); "A Selection of Recommended Web Sites for TLs To Visit" (Karen Bonanno); "A Selection of Recommended Web Sites for TLs To Visit" (Sandra…

  15. Decision precision or holistic heuristic?: Insights on on-site selection of student nurses and midwives.

    Science.gov (United States)

    Macduff, Colin; Stephen, Audrey; Taylor, Ruth

    2016-01-01

    Concerns about quality of care delivery in the UK have led to more scrutiny of criteria and methods for the selection of student nurses. However few substantive research studies of on-site selection processes exist. This study elicited and interpreted perspectives on interviewing processes and related decision making involved in on-site selection of student nurses and midwives. Individual and focus group interviews were undertaken with 36 lecturers, 5 clinical staff and 72 students from seven Scottish universities. Enquiry focused primarily on interviewing of candidates on-site. Qualitative content analysis was used as a primary strategy, followed by in-depth thematic analysis. Students had very mixed experiences of interview processes. Staff typically took into account a range of candidate attributes that they valued in order to achieve holistic assessments. These included: interpersonal skills, team working, confidence, problem-solving, aptitude for caring, motivations, and commitment. Staff had mixed views of the validity and reliability of interview processes. A holistic heuristic for overall decision making predominated over belief in the precision of, and evidence base for, particular attribute measurement processes. While the development of measurement tools for particular attributes continues apace, tension between holism and precision is likely to persist within on-site selection procedures. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. [Selection of medical graduates for residency posts. A comparative study of the methodologies used in different countries].

    Science.gov (United States)

    Lobato, Ramiro D; Lagares, Alfonso; Villena, Victoria; García Seoane, Jorge; Jiménez-Roldán, Luis; Munarriz, Pablo M; Castaño-Leon, Ana M; Alén, José F

    2015-01-01

    The design of an appropriate method for the selection of medical graduates for residency posts is extremely important, not only for the efficiency of the method itself (accurate identification of most competent candidates), but also for its influence on the study and teaching methodologies operating in medical schools. Currently, there is a great variation in the criteria used in different countries and there is no definitively appropriate method. The use of isolated or combined criteria, such as the marks obtained by students in medical schools, their performance in tests of theoretical knowledge and evaluations of clinical competence, or personal interviews, have a limited value for identifying those candidates who will perform better during the residency and later on during independent practice. To analyse the variability in the methodologies used for the selection of residents employed in different countries, in particular those used in the United Kingdom and USA, where external agencies and medical schools make systematic analyses of curriculum development. The advantages and disadvantages of national or transnational licensing examinations on the process of convergence and harmonization of medical degrees and residency programmes through Europe are discussed. The present analysis is used to design a new and more efficient multi-criteria methodology for resident selection in Spain, which will be published in the next issue of this journal. Since the multi-criteria methods used in UK and USA appear to be most consistent, these have been employed for designing the new methodology that could be applied in Spain. Although many experts in medical education reject national examinations for awarding medical degrees or ranking candidates for residency posts, it seems that, when appropriately designed, they can be used to verify the level of competence of graduating students without necessarily distorting curriculum implementation or improvement. Copyright © 2014

  17. A Site Selection Model for a Straw-Based Power Generation Plant with CO2 Emissions

    Directory of Open Access Journals (Sweden)

    Hao Lv

    2014-10-01

    Full Text Available The decision on the location of a straw-based power generation plant has a great influence on the plant’s operation and performance. This study explores traditional theories for site selection. Using integer programming, the study optimizes the economic and carbon emission outcomes of straw-based power generation as two objectives, with the supply and demand of straw as constraints. It provides a multi-objective mixed-integer programming model to solve the site selection problem for a straw-based power generation plant. It then provides a case study to demonstrate the application of the model in the decision on the site selection for a straw-based power generation plant with a Chinese region. Finally, the paper discusses the result of the model in the context of the wider aspect of straw-based power generation.

  18. An ArcGIS decision support tool for artificial reefs site selection (ArcGIS ARSS)

    Science.gov (United States)

    Stylianou, Stavros; Zodiatis, George

    2017-04-01

    Although the use and benefits of artificial reefs, both socio-economic and environmental, have been recognized with research and national development programmes worldwide their development is rarely subjected to a rigorous site selection process and the majority of the projects use the traditional (non-GIS) approach, based on trial and error mode. Recent studies have shown that the use of Geographic Information Systems, unlike to traditional methods, for the identification of suitable areas for artificial reefs siting seems to offer a number of distinct advantages minimizing possible errors, time and cost. A decision support tool (DSS) has been developed based on the existing knowledge, the multi-criteria decision analysis techniques and the GIS approach used in previous studies in order to help the stakeholders to identify the optimal locations for artificial reefs deployment on the basis of the physical, biological, oceanographic and socio-economic features of the sites. The tool provides to the users the ability to produce a final report with the results and suitability maps. The ArcGIS ARSS support tool runs within the existing ArcMap 10.2.x environment and for the development the VB .NET high level programming language has been used along with ArcObjects 10.2.x. Two local-scale case studies were conducted in order to test the application of the tool focusing on artificial reef siting. The results obtained from the case studies have shown that the tool can be successfully integrated within the site selection process in order to select objectively the optimal site for artificial reefs deployment.

  19. Public concerns about and perceptions of solid waste dump sites and selection of sanitary landfill sites in the West Bank, Palestinian territory.

    Science.gov (United States)

    Al-Khatib, Issam A; Abu Hammad, Ahmad; Sharkas, Othman A; Sato, Chikashi

    2015-04-01

    Palestinian inhabitants have disposed of their solid wastes at open dumpsites over the past 40 years without an adequate solid waste management (SWM) plans. Recently, the Palestinian Authority initiated SWM planning to establish controlled sanitary landfills, based on a participatory approach. The purpose of this study was to assess public concerns about existing solid waste dumpsites and public perceptions of sanitary landfill site selection. The study will also take into consideration the effect of diverse social, economic, and environmental related factors of the inhabitants on sitting suitable landfill sites in three Palestinian districts in the West Bank, namely, "Nablus," "Salfit," and "Ramallah and Al-Bireh." The results of this study showed that 64.9% of the sample population are aware of the problems and potential impacts associated with random dumpsites, and 41.6% think that they are suffering from the dumps. Among the environmental, socioeconomic, and political factors, the environmental factors, air pollution in particular, are thought be the most important consideration in selecting a landfill site. The "fairness in selecting a landfill site" was chosen to be one of the most important socioeconomic factors, possibly as a reaction to the Israeli occupation and subsequent land use restrictions in the West Bank, Palestinian territory.

  20. A holistic method for selecting tidal stream energy hotspots under technical, economic and functional constraints

    International Nuclear Information System (INIS)

    Vazquez, A.; Iglesias, G.

    2016-01-01

    Highlights: • A method for selecting the most suitable sites for tidal stream farms was presented. • The selection was based on relevant technical, economic and functional aspects. • As a case study, a model of the Bristol Channel was implemented and validated. - Abstract: Although a number of prospective locations for tidal stream farms have been identified, the development of a unified approach for selecting the optimum site in a region remains a current research topic. The objective of this work is to develop and apply a methodology for determining the most suitable sites for tidal stream farms, i.e. sites whose characteristics maximise power performance, minimise cost and avoid conflicts with competing uses of the marine space. Illustrated through a case study in the Bristol Channel, the method uses a validated hydrodynamics model to identify highly energetic areas and a geospatial Matlab-based program (designed ad hoc) to estimate the energy output that a tidal farm at the site with a given technology would have. This output is then used to obtain the spatial distribution of the levelised cost of energy and, on this basis, to preselect certain areas. Subsequently, potential conflicts with other functions of the marine space (e.g. fishing, shipping) are considered. The result is a selection of areas for tidal stream energy development based on a holistic approach, encompassing the relevant technical, economic and functional aspects. This methodology can lead to a significant improvement in the selection of tidal sites, thereby increasing the possibilities of project acceptance and development.

  1. Variation at the DRD4 locus is associated with wariness and local site selection in urban black swans.

    Science.gov (United States)

    van Dongen, Wouter F D; Robinson, Randall W; Weston, Michael A; Mulder, Raoul A; Guay, Patrick-Jean

    2015-12-11

    Interactions between wildlife and humans are increasing. Urban animals are often less wary of humans than their non-urban counterparts, which could be explained by habituation, adaptation or local site selection. Under local site selection, individuals that are less tolerant of humans are less likely to settle in urban areas. However, there is little evidence for such temperament-based site selection, and even less is known about its underlying genetic basis. We tested whether site selection in urban and non-urban habitats by black swans (Cygnus atratus) was associated with polymorphisms in two genes linked to fear in animals, the dopamine receptor D4 (DRD4) and serotonin transporter (SERT) genes. Wariness in swans was highly repeatable between disturbance events (repeatability = 0.61) and non-urban swans initiated escape from humans earlier than urban swans. We found no inter-individual variation in the SERT gene, but identified five DRD4 genotypes and an association between DRD4 genotype and wariness. Individuals possessing the most common DRD4 genotype were less wary than individuals possessing rarer genotypes. As predicted by the local site selection hypothesis, genotypes associated with wary behaviour were over three times more frequent at the non-urban site. This resulted in moderate population differentiation at DRD4 (FST = 0.080), despite the sites being separated by only 30 km, a short distance for this highly-mobile species. Low population differentiation at neutrally-selected microsatellite loci and the likely occasional migration of swans between the populations reduces the likelihood of local site adaptations. Our results suggest that wariness in swans is partly genetically-determined and that wary swans settle in less-disturbed areas. More generally, our findings suggest that site-specific management strategies may be necessary that consider the temperament of local animals.

  2. Technology needs for selecting and evaluating high-level waste repository sites in crystalline rock

    International Nuclear Information System (INIS)

    1988-12-01

    This report describes properties and processes that govern the performance of the geological barrier in a nuclear waste isolation system in crystalline rock and the state-of-the-art in the understanding of these properties and processes. Areas and topics that require further research and development as well as technology needs for investigating and selecting repository sites are presented. Experiences from the Swedish site selection program are discussed, and a general investigation strategy is presented for an area characterization phase of an exploratory program in crystalline rocks. 255 refs., 65 figs., 10 tabs

  3. Nuclear waste and social peace - Strategies of site selection for radioactive waste disposal. Proceeding

    International Nuclear Information System (INIS)

    Dally, A.

    2003-01-01

    In February 1999, BMU appointed a working party to establish site selection procedures for repositories (AkEnd) which was to develop a transparent procedure of finding and selecting sites for the final storage of all kinds of radioactive waste in Germany. The procedure finally proposed by AkEnd implies considerable uncertainty, inter alia, about its legal implementability, the time required, and funding. The discussion papers of the meeting ''atomic waste and social peace'' show a tightrope walk between society, clerical aspects and scientists taking into account also a right of say for critical citizens. (GL)

  4. HOW DO STUDENTS SELECT SOCIAL NETWORKING SITES? AN ANALYTIC HIERARCHY PROCESS (AHP MODEL

    Directory of Open Access Journals (Sweden)

    Chun Meng Tang

    2015-12-01

    Full Text Available Social networking sites are popular among university students, and students today are indeed spoiled for choice. New emerging social networking sites sprout up amid popular sites, while some existing ones die out. Given the choice of so many social networking sites, how do students decide which one they will sign up for and stay on as an active user? The answer to this question is of interest to social networking site designers and marketers. The market of social networking sites is highly competitive. To maintain the current user base and continue to attract new users, how should social networking sites design their sites? Marketers spend a fairly large percent of their marketing budget on social media marketing. To formulate an effective social media strategy, how much do marketers understand the users of social networking sites? Learning from website evaluation studies, this study intends to provide some answers to these questions by examining how university students decide between two popular social networking sites, Facebook and Twitter. We first developed an analytic hierarchy process (AHP model of four main selection criteria and 12 sub-criteria, and then administered a questionnaire to a group of university students attending a course at a Malaysian university. AHP analyses of the responses from 12 respondents provided an insight into the decision-making process involved in students’ selection of social networking sites. It seemed that of the four main criteria, privacy was the top concern, followed by functionality, usability, and content. The sub-criteria that were of key concern to the students were apps, revenue-generating opportunities, ease of use, and information security. Between Facebook and Twitter, the students thought that Facebook was the better choice. This information is useful for social networking site designers to design sites that are more relevant to their users’ needs, and for marketers to craft more effective

  5. Multi-criteria selection of offshore wind farms: Case study for the Baltic States

    International Nuclear Information System (INIS)

    Chaouachi, Aymen; Covrig, Catalin Felix; Ardelean, Mircea

    2017-01-01

    This paper presents a multi-criteria selection approach for offshore wind sites assessment. The proposed site selection framework takes into consideration the electricity network’s operating security aspects, economic investment, operation costs and capacity performances relative to each potential site. The selection decision is made through Analytic Hierarchy Process (AHP), with an inherited flexibility that aims to allow end users to adjust the expected benefits accordingly to their respective and global priorities. The proposed site selection framework is implemented as an interactive case study for three Baltic States in the 2020 time horizon, based on real data and exhaustive power network models, taking into consideration the foreseen upgrades and network reinforcements. For each country the optimal offshore wind sites are assessed under multiple weight contribution scenarios, reflecting the characteristics of market design, regulatory aspects or renewable integration targets. - Highlights: • We use a multi-criteria selection approach for offshore wind sites assessment. • Security aspects, economic investment, operation costs and capacity performances are included. • The selection decision is made through an Analytic Hierarchy Process (AHP). • We implement the methodology as a case study for three Baltic States in the 2020 time horizon.

  6. Breeding site selection by coho salmon (Oncorhynchus kisutch) in relation to large wood additions and factors that influence reproductive success

    Science.gov (United States)

    Clark, Steven M.; Dunham, Jason B.; McEnroe, Jeffery R.; Lightcap, Scott W.

    2014-01-01

    The fitness of female Pacific salmon (Oncorhynchus spp.) with respect to breeding behavior can be partitioned into at least four fitness components: survival to reproduction, competition for breeding sites, success of egg incubation, and suitability of the local environment near breeding sites for early rearing of juveniles. We evaluated the relative influences of habitat features linked to these fitness components with respect to selection of breeding sites by coho salmon (Oncorhynchus kisutch). We also evaluated associations between breeding site selection and additions of large wood, as the latter were introduced into the study system as a means of restoring habitat conditions to benefit coho salmon. We used a model selection approach to organize specific habitat features into groupings reflecting fitness components and influences of large wood. Results of this work suggest that female coho salmon likely select breeding sites based on a wide range of habitat features linked to all four hypothesized fitness components. More specifically, model parameter estimates indicated that breeding site selection was most strongly influenced by proximity to pool-tail crests and deeper water (mean and maximum depths). Linkages between large wood and breeding site selection were less clear. Overall, our findings suggest that breeding site selection by coho salmon is influenced by a suite of fitness components in addition to the egg incubation environment, which has been the emphasis of much work in the past.

  7. Site-selective protein-modification chemistry for basic biology and drug development.

    Science.gov (United States)

    Krall, Nikolaus; da Cruz, Filipa P; Boutureira, Omar; Bernardes, Gonçalo J L

    2016-02-01

    Nature has produced intricate machinery to covalently diversify the structure of proteins after their synthesis in the ribosome. In an attempt to mimic nature, chemists have developed a large set of reactions that enable post-expression modification of proteins at pre-determined sites. These reactions are now used to selectively install particular modifications on proteins for many biological and therapeutic applications. For example, they provide an opportunity to install post-translational modifications on proteins to determine their exact biological roles. Labelling of proteins in live cells with fluorescent dyes allows protein uptake and intracellular trafficking to be tracked and also enables physiological parameters to be measured optically. Through the conjugation of potent cytotoxicants to antibodies, novel anti-cancer drugs with improved efficacy and reduced side effects may be obtained. In this Perspective, we highlight the most exciting current and future applications of chemical site-selective protein modification and consider which hurdles still need to be overcome for more widespread use.

  8. A mixed integer linear programming model for integrating thermodynamic cycles for waste heat exploitation in process sites

    International Nuclear Information System (INIS)

    Oluleye, Gbemi; Smith, Robin

    2016-01-01

    Highlights: • MILP model developed for integration of waste heat recovery technologies in process sites. • Five thermodynamic cycles considered for exploitation of industrial waste heat. • Temperature and quantity of multiple waste heat sources considered. • Interactions with the site utility system considered. • Industrial case study presented to illustrate application of the proposed methodology. - Abstract: Thermodynamic cycles such as organic Rankine cycles, absorption chillers, absorption heat pumps, absorption heat transformers, and mechanical heat pumps are able to utilize wasted thermal energy in process sites for the generation of electrical power, chilling and heat at a higher temperature. In this work, a novel systematic framework is presented for optimal integration of these technologies in process sites. The framework is also used to assess the best design approach for integrating waste heat recovery technologies in process sites, i.e. stand-alone integration or a systems-oriented integration. The developed framework allows for: (1) selection of one or more waste heat sources (taking into account the temperatures and thermal energy content), (2) selection of one or more technology options and working fluids, (3) selection of end-uses of recovered energy, (4) exploitation of interactions with the existing site utility system and (5) the potential for heat recovery via heat exchange is also explored. The methodology is applied to an industrial case study. Results indicate a systems-oriented design approach reduces waste heat by 24%; fuel consumption by 54% and CO_2 emissions by 53% with a 2 year payback, and stand-alone design approach reduces waste heat by 12%; fuel consumption by 29% and CO_2 emissions by 20.5% with a 4 year payback. Therefore, benefits from waste heat utilization increase when interactions between the existing site utility system and the waste heat recovery technologies are explored simultaneously. The case study also shows

  9. Site selection under the underground geologic store plan. Procedures of selecting underground geologic stores as disputed by society, science, and politics. Site selection rules; Mit dem Sachplan Geologische Tiefenlager auf Standortsuche. Auswahlverfahren fuer geologische Tiefenlager im Spannungsfeld von Gesellschaft, Wissenschaft und Politik, Regeln fuer die Standortsuche

    Energy Technology Data Exchange (ETDEWEB)

    Aebersold, M. [Bundesamt fuer Energie BFE, Sektion Entsorgung Radioaktive Abfaelle, Bern (Switzerland)

    2008-10-15

    The new Nuclear Power Act and the Nuclear Power Ordinance of 2005 are used in Switzerland to select a site of an underground geologic store for radioactive waste in a substantive planning procedure. The ''Underground Geologic Store Substantive Plan'' is to ensure the possibility to build underground geologic stores in an independent, transparent and fair procedure. The Federal Office for Energy (BFE) is the agency responsible for this procedure. The ''Underground Geologic Store'' Substantive Plan comprises these principles: - The long term protection of people and the environment enjoys priority. Aspects of regional planning, economics and society are of secondary importance. - Site selection is based on the waste volumes arising from the five nuclear power plants currently existing in Switzerland. The Substantive Plan is no precedent for or against future nuclear power plants. - A transparent and fair procedure is an indispensable prerequisite for achieving the objectives of a Substantive Plan, i.e., finding accepted sites for underground geologic stores. The Underground Geologic Stores Substantive Plan is arranged in two parts, a conceptual part defining the rules of the selection process, and an implementation part documenting the selection process step by step and, in the end, naming specific sites of underground geologic stores in Switzerland. The objective is to be able to commission underground geologic stores in 25 or 35 years' time. In principle, 2 sites are envisaged, one for low and intermediate level waste, and one for high level waste. The Swiss Federal Council approved the conceptual part on April 2, 2008. This marks the beginning of the implementation phase and the site selection process proper. (orig.)

  10. Comparison between dispersed nuclear power plants and a nuclear energy center at a hypothetical site on Kentucky Lake, Tennessee. Volume I. Summary

    International Nuclear Information System (INIS)

    Burwell, C.C.; Reister, D.B.; Rosemarin, C.S.; Sisman, O.; Suffern, J.S.

    1976-05-01

    A brief summary is presented of the surrogate site concept used to compare the Nuclear Energy Center (NEC) concept with the present method of dispersed siting of nuclear power plants. Included are data on power transmission, environmental considerations, and a discussion of a site selection methodology

  11. Prediction of suspended-sediment concentrations at selected sites in the Fountain Creek watershed, Colorado, 2008-09

    Science.gov (United States)

    Stogner, Sr., Robert W.; Nelson, Jonathan M.; McDonald, Richard R.; Kinzel, Paul J.; Mau, David P.

    2013-01-01

    determine fluxes of suspended sediment for the median particle size and for the measured range of particle sizes in the channel. Three different techniques were investigated for making the suspended-sediment predictions; these techniques have varying degrees of reliance on measured data and also have greatly differing degrees of complexity. Based on these data, the calibrated Rouse method provided the best balance between accuracy and both computational and data collection costs; the presence of substantial washload was the primary factor in eliminating the simpler and the more complex techniques. Based on this work, using the selected technique at additional sites in the watershed to determine relative loads and source areas appears plausible. However, to ensure that the methodology presented in this report yields reasonable results at other selected sites in the basin, it is necessary to collect additional verification data sets at those locations.

  12. Quantitative Framework and Management Expectation Tool for the Selection of Bioremediation Approaches at Chlorinated Solvent Sites

    Science.gov (United States)

    2015-03-19

    Bioremediation Approaches at Chlorinated Solvent Sites March 19, 2015 SERDP & ESTCP Webinar Series (#11) SERDP & ESTCP Webinar Series Welcome and...Expectation Tool for the Selection of Bioremediation Approaches at Chlorinated Solvent Sites Ms. Carmen Lebrón, Independent Consultant (20 minutes + Q&A) Dr...ESTCP Webinar Series Quantitative Framework and Management Expectation Tool for the Selection of Bioremediation Approaches at Chlorinated

  13. The analysis of distribution of meteorological over China in astronomical site selection

    Science.gov (United States)

    Zhang, Cai-yun; Weng, Ning-quan

    2014-02-01

    The distribution of parameters such as sunshine hours, precipitation, and visibility were obtained by analyzing the meteorological data in 906 stations of China during 1981~2012. And the month and annual variations of the parameters in some typical stations were discussed. The results show that: (1) the distribution of clear days is similar to that of sunshine hours, the values of which decrease from north to south and from west to east. The distributions of cloud, precipitation and vapor pressure are opposite. (2) The northwest areas in China have the characteristic such as low precipitation and vapor pressure, small cloud clever, and good visibility, which are the general conditions of astronomical site selection. (3) The parameters have obvious month variation. There are large precipitation, long sunshine hours and strong radiation in the mid months of one year, which are opposite in beginning and ending of one year. (4) In the selected stations, the value of vapor pressure decreases year by year, and the optical depth is similar or invariable. All the above results provided for astronomical site selection.

  14. NASA Parts Selection List (NPSL) WWW Site http://nepp.nasa.gov/npsl

    Science.gov (United States)

    Brusse, Jay

    2000-01-01

    The NASA Parts Selection List (NPSL) is an on-line resource for electronic parts selection tailored for use by spaceflight projects. The NPSL provides a list of commonly used electronic parts that have a history of satisfactory use in spaceflight applications. The objective of this www site is to provide NASA projects, contractors, university experimenters, et al with an easy to use resource that provides a baseline of electronic parts from which designers are encouraged to select. The NPSL is an ongoing resource produced by Code 562 in support of the NASA HQ funded NASA Electronic Parts and Packaging (NEPP) Program. The NPSL is produced as an electronic format deliverable made available via the referenced www site administered by Code 562. The NPSL does not provide information pertaining to patented or proprietary information. All of the information contained in the NPSL is available through various other public domain resources such as US Military procurement specifications for electronic parts, NASA GSFC's Preferred Parts List (PPL-21), and NASA's Standard Parts List (MIL-STD975).

  15. A GIS based screening tool for locating and ranking of suitable stormwater harvesting sites in urban areas.

    Science.gov (United States)

    Inamdar, P M; Cook, S; Sharma, A K; Corby, N; O'Connor, J; Perera, B J C

    2013-10-15

    There is the need to re-configure current urban water systems to achieve the objective of sustainable water sensitive cities. Stormwater represents a valuable alternative urban water source to reduce pressure on fresh water resources, and to mitigate the environmental impact of urban stormwater runoff. The selection of suitable urban stormwater harvesting sites is generally based on the judgement of water planners, who are faced with the challenge of considering multiple technical and socio-economic factors that influence the site suitability. To address this challenge, the present study developed a robust GIS based screening methodology for identifying potentially suitable stormwater harvesting sites in urban areas as a first pass for then more detailed investigation. The study initially evaluated suitability based on the match between harvestable runoff and demand through a concept of accumulated catchments. Drainage outlets of these accumulated catchments were considered as potential stormwater harvesting sites. These sites were screened and ranked under screening parameters namely demand, ratio of runoff to demand and weighted demand distance. The methodology described in this paper was successfully applied to a case study in Melbourne, Australia in collaboration with the local water utility. The methodology was found to be effective in supporting the selection of priority sites for stormwater harvesting schemes, as it provided the basis to identify, short-list and rank sites for further detailed investigation. The rapid identification of suitable sites for stormwater harvesting can assist planners in prioritising schemes in areas that will have the most impact on reducing potable water demand. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Space-planning and structural solutions of low-rise buildings: Optimal selection methods

    Science.gov (United States)

    Gusakova, Natalya; Minaev, Nikolay; Filushina, Kristina; Dobrynina, Olga; Gusakov, Alexander

    2017-11-01

    The present study is devoted to elaboration of methodology used to select appropriately the space-planning and structural solutions in low-rise buildings. Objective of the study is working out the system of criteria influencing the selection of space-planning and structural solutions which are most suitable for low-rise buildings and structures. Application of the defined criteria in practice aim to enhance the efficiency of capital investments, energy and resource saving, create comfortable conditions for the population considering climatic zoning of the construction site. Developments of the project can be applied while implementing investment-construction projects of low-rise housing at different kinds of territories based on the local building materials. The system of criteria influencing the optimal selection of space-planning and structural solutions of low-rise buildings has been developed. Methodological basis has been also elaborated to assess optimal selection of space-planning and structural solutions of low-rise buildings satisfying the requirements of energy-efficiency, comfort and safety, and economical efficiency. Elaborated methodology enables to intensify the processes of low-rise construction development for different types of territories taking into account climatic zoning of the construction site. Stimulation of low-rise construction processes should be based on the system of approaches which are scientifically justified; thus it allows enhancing energy efficiency, comfort, safety and economical effectiveness of low-rise buildings.

  17. ILK statement on the recommendations by the working group on procedures for the selection of repository sites

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The Working Group on Procedures for the Selection of Repository Sites (AkEnd) had been appointed by the German Federal Ministry for the Environment (BMU) to develop procedures and criteria for the search for, and selection of, a repository site for all kinds of radioactive waste in deep geologic formations in Germany. ILK in principle welcomes the attempt on the part of AkEnd to develop a systematic procedure. On the other hand, ILK considers the two constraints imposed by BMU inappropriate: AkEnd was not to take into account the two existing sites of Konrad and Gorleben and, instead, work from a so-called white map of Germany. ILK recommends to perform a comprehensive safety analysis of Gorleben and define a selection procedure including the facts about Gorleben and, in addition, to commission the Konrad repository as soon as possible. The one-repository concept established as a precondition by BMU greatly restricts the selection procedure. There are no technical or scientific reasons for such concept. ILK recommends to plan for separate repositories, which would also correspond to international practice. The geoscientific criteria proposed by AkEnd should be examined and revised. With respect to the site selection procedure proposed, ILK feels that procedure is unable to define a targeted approach. Great importance must be attributed to public participation. The final site selection must be made under the responsibility of the government or the parliament. (orig.) [de

  18. Evaluation methodology for fixed-site physical protection systems

    International Nuclear Information System (INIS)

    Bennett, H.A.; Olascoaga, M.T.

    1980-01-01

    A system performance evaluation methodology has been developed to aid the Nuclear Regulatory Commission (NRC) in the implementation of new regulations designed to upgrade the physical protection of nuclear fuel cycle facilities. The evaluation methodology, called Safeguards Upgrade Rule Evaluation (SURE), provides a means of explicitly incorporating measures for highly important and often difficult to quantify performance factors, e.g., installation, maintenance, training and proficiency levels, compatibility of components in subsystems, etc. This is achieved by aggregating responses to component and system questionaires through successive levels of a functional hierarchy developed for each primary performance capability specified in the regulations, 10 CFR 73.45. An overall measure of performance for each capability is the result of this aggregation process. This paper provides a descripton of SURE

  19. Distinct site- and state-selective dissociation of methyl-trifluoroacetate observed in core-electron excitation at the oxygen K-edge region

    Science.gov (United States)

    Yamanaka, T.; Tabayashi, K.; Maruyama, T.; Harada, C.; Yoshida, H.

    2009-11-01

    Distinct site- and state-selective dissociation following the O1s core-excitation has been found in the gaseous molecules of methyl trifluoroacetate (MTFA). The site- and state-selective dissociation was examined by measuring the branching ratios of dominant CH3+ and CHO+ fragments. The branching ratios from MTFA showed that site-selective dissociation takes place via the excitation from the different atomic sites to the same π*CO resonance state, (O1sCO-1π*CO) and (O1sOMe-1π*CO). A pronounced O1sOMe site-selectivity was identified by a significant increment of CHO+ formation at the (O1sOMe→π*CO) band. The site-selectivity was also justified by an equivalent core approximation using the density functional theory calculation. State-selective dissociation was identified among the (O1sOMe-1π*CO), (O1sOMe-1σ*O-Me) and (O1sOMe-1σ*C-OMe) transitions originated from the same OMe core. State-selective production of CH3+ could be found at the (O1sOMe→σ*O-Me) band, whereas state-selective formation of CHO+ was observed at the (O1sOMe→π*CO) and (O1sOMe→σ*C-OMe) bands.

  20. Nest site selection by Hypsiboas faber(Anura, Hylidae in Southern Brazil

    Directory of Open Access Journals (Sweden)

    André L. Luza

    2015-12-01

    Full Text Available ABSTRACT Male gladiator frogs of Hypsiboas Wagler, 1830 build nests on available substrate surrounding ponds and streams where female spawn eggs during the breeding period. Although gladiator frogs seem to show plasticity in the way they construct their nests, there is no study reporting if these species present preferences about microhabitat conditions for nest-building (mainly under subtropical climate. Predation pressure and environmental conditions have been considered major processes shaping the great diversity of reproductive strategies performed by amphibians, but microhabitat conditions should explain where to build a nest as well as how nest looks. This study aimed to test nest site selection for nest-building by Hypsiboas faber(Wied-Neuwied, 1821, determining which factors are related to nest site selection and nest features. The survey was conducted at margins of two permanent ponds in Southern Brazil. Habitat factors were evaluated in 18 plots with nest and 18 plots in the surrounding without nest (control, describing vegetation structure and heterogeneity, and substrate characteristics. Water temperature was measured inside the nest and in its adjacency. Nest features assessed were area, depth and temperature. Habitat characteristics differed between plots with and without nest. Microhabitat selected for nest-building was characterized by great vegetation cover and height, as well as shallower water and lower cover of organic matter in suspension than in plots without nest. Differences between temperature inside nest and in its adjacency were not observed. No relationship between nest features and habitat descriptors was evidenced. Results revealed that Hypsiboas faber does not build nests anywhere. Males seem to prefer more protected habitats, probably avoiding predation, invasion of conspecific males and inclement weather. Lack of differences between temperature inside- and outside-nest suggest that nest do not improve this

  1. Site selection of a dual purpose nuclear power plant in Saudi Arabia

    International Nuclear Information System (INIS)

    Hussein, F.M.; Obeid, M.A.; El-Malahy, K.S.

    1987-01-01

    Selecting a nuclear power plant site for power production and water desalination is a very complex problem, especially in countries with moderate technology. Many interrelated factors affect the process, and professional judgments by various experts are involved. Four sites, all located on the West Coast of Saudi Arabia along the Red Sea, were chosen as potential sites for building such a plant. (All sites were in either the northern or southern section of the coast; the central part was excluded for pilgrims' safety.) The East Coast was completely eliminated in the initial screening process due to its strategic location, the existence of oil fields and refineries, and its proximity to other Arabian (Persian) Gulf countries (to minimize radioactive releases to these countries in case of an accident). A computer code based on Saaty's eigenvalue technique and developed in a previous study was used in this analysis. Twenty-one main criteria were considered, and the sites were ranked to determine which was most desirable. Site 4 was found to be most suitable, followed by site 3

  2. Regulatory Aspects for Site Selection for Radiological and Nuclear Installations

    International Nuclear Information System (INIS)

    Sirag, N.M.

    2016-01-01

    The purpose of this research is to check in one of the considerations necessary for any new nuclear facility. A previous study that was conducted using a questionnaire reported that general admission to the public, aesthetic considerations, and characteristics associated with the site are able to adequately accept the existence of new nuclear facilities. The findings of this research revealed that public involvement in the process of site selection and in the design of nuclear power plants, an understanding of their point of view is an important aspect of a participatory approach. An important factor for any new nuclear program is to improve confidence in the energy choices in the future. A survey was conducted on 1304 adults to, to get the main goal. The study concluded showed that the prevalence of culture of safety reflected on the public acceptance of the site, especially if it takes into account the aesthetic and environmental considerations.

  3. Route Selection with Unspecified Sites Using Knowledge Based Genetic Algorithm

    Science.gov (United States)

    Kanoh, Hitoshi; Nakamura, Nobuaki; Nakamura, Tomohiro

    This paper addresses the problem of selecting a route to a given destination that traverses several non-specific sites (e.g. a bank, a gas station) as requested by a driver. The proposed solution uses a genetic algorithm that includes viral infection. The method is to generate two populations of viruses as domain specific knowledge in addition to a population of routes. A part of an arterial road is regarded as a main virus, and a road that includes a site is regarded as a site virus. An infection occurs between two points common to a candidate route and the virus, and involves the substitution of the intersections carried by the virus for those on the existing candidate route. Crossover and infection determine the easiest-to-drive and quasi-shortest route through the objective landmarks. Experiments using actual road maps show that this infection-based mechanism is an effective way of solving the problem. Our strategy is general, and can be effectively used in other optimization problems.

  4. Site-specific fragmentation of polystyrene molecule using size-selected Ar gas cluster ion beam

    International Nuclear Information System (INIS)

    Moritani, Kousuke; Mukai, Gen; Hashinokuchi, Michihiro; Mochiji, Kozo

    2009-01-01

    The secondary ion mass spectrum (SIMS) of a polystyrene thin film was investigated using a size-selected Ar gas cluster ion beam (GCIB). The fragmentation in the SIM spectrum varied by kinetic energy per atom (E atom ); the E atom dependence of the secondary ion intensity of the fragment species of polystyrene can be essentially classified into three types based on the relationship between E atom and the dissociation energy of a specific bonding site in the molecule. These results indicate that adjusting E atom of size-selected GCIB may realize site-specific bond breaking within a molecule. (author)

  5. Siting-selection study for the Soyland Power Cooperative, Inc. , compressed-air energy-storage system (CAES)

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    A method used for siting a compressed air energy storage (CAES) system using geotechnical and environmental criteria is explained using the siting of a proposed 220 MW water-compensated CAES plant in Illinois as an example. Information is included on the identification and comparative ranking of 28 geotechnically and environmental sites in Illinois, the examination of fatal flaws, e.g., mitigation, intensive studies, costly studies, permit denials, at 7 sites; and the selection of 3 sites for further geological surveying. (LCL)

  6. Nest site selection of the Southern Pale Chanting Goshawk in the ...

    African Journals Online (AJOL)

    This study investigated whether Southern Pale Chanting Goshawks Melierax canorus that est in the low woody vegetation of the arid Little Karoo reduce nest predation by selecting nest trees and sites that are less accessible to and conspicuous for terrestrial predators. The 114 nest trees and shrubs sampled were taller (0 ...

  7. Review of selected 100-N waste sites related to N-Springs remediation projects

    International Nuclear Information System (INIS)

    DeFord, D.H.; Carpenter, R.W.

    1996-01-01

    This document has been prepared in support of the environmental restoration program at the US Department of Energy's Hanford Site near Richland, Washington, by the Bechtel Hanford, Inc. Facility and Waste Site Research Office. It provides historical information that documents and characterizes selected waste sites that are related to the N-Springs remediation projects. The N-Springs are a series of small, inconspicuous groundwater seepage springs located along the Columbia River shoreline near the 100-N Reactor. The spring site is hydrologically down-gradient from several 100-N Area liquid waste sites that are believed to have been the source(s) of the effluents being discharged by the springs. This report documents and characterizes these waste sites, including the 116-N-1 Crib and Trench, 116-N-3 Crib and Trench, unplanned releases, septic tariks, and a backwash pond

  8. Nucleic acid constructs containing orthogonal site selective recombinases (OSSRs)

    Energy Technology Data Exchange (ETDEWEB)

    Gilmore, Joshua M.; Anderson, J. Christopher; Dueber, John E.

    2017-08-29

    The present invention provides for a recombinant nucleic acid comprising a nucleotide sequence comprising a plurality of constructs, wherein each construct independently comprises a nucleotide sequence of interest flanked by a pair of recombinase recognition sequences. Each pair of recombinase recognition sequences is recognized by a distinct recombinase. Optionally, each construct can, independently, further comprise one or more genes encoding a recombinase capable of recognizing the pair of recombinase recognition sequences of the construct. The recombinase can be an orthogonal (non-cross reacting), site-selective recombinase (OSSR).

  9. The importante of physical and mathematical models for nuclear power plants site selection

    International Nuclear Information System (INIS)

    Rios, J.L.P.

    1989-01-01

    The importance of the release of effluents from nuclear installations for the site selection of nuclear power plants is discussed. The main available analysis methods, physical and mathematical, is presented [pt

  10. An Extended VIKOR-Based Approach for Pumped Hydro Energy Storage Plant Site Selection with Heterogeneous Information

    Directory of Open Access Journals (Sweden)

    Yunna Wu

    2017-08-01

    Full Text Available The selection of a desirable site for constructing a pumped hydro energy storage plant (PHESP plays a vital important role in the whole life cycle. However, little research has been done on the site selection of PHESP, which affects the rapid development of PHESP. Therefore, this paper aims to select the most ideal PHESP site from numerous candidate alternatives using the multi-criteria decision-making (MCDM technique. Firstly, a comprehensive evaluation criteria system is established for the first time. Then, considering quantitative and qualitative criteria coexist in this system, multiple types of representations, including crisp numerical values (CNVs, triangular intuitionistic fuzzy numbers (TIFNs, and 2-dimension uncertain linguistic variables (2DULVs, are employed to deal with heterogeneous criteria information. To determine the weight of criteria and fully take the preference of the decision makers (DMs into account, the analytic hierarchy process (AHP method is applied for criteria weighting. After that, an extended Vlsekriterijumska Optimizacija I Kompromisno Resenje (VIKOR method is utilized to provide compromise solutions for the PHESP site considering such heterogeneous information. At last, the proposed model is then applied in a case study of Zhejiang province, China to illustrate its practicality and efficiency. The result shows the Changlongshan should be selected as the optimal PHESP.

  11. Short communication: Calving site selection of multiparous, group-housed dairy cows is influenced by site of a previous calving

    DEFF Research Database (Denmark)

    Rørvang, Maria Vilain; Nielsen, B.L.; Herskin, Mette S.

    2017-01-01

    A calving cow and her newborn calf appear to have an attracting effect on periparturient cows, which may potentially influence the functionality of future motivation-based calving pen designs. In this pilot study we examined whether calving site selection of group-housed Holstein dairy cows...

  12. Incorporating in situ habitat patchiness in site selection models reveals that site fidelity is not always a consequence of animal choice.

    Science.gov (United States)

    Martinez, Aline S; Queiroz, Eduardo V; Bryson, Mitch; Byrne, Maria; Coleman, Ross A

    2017-07-01

    Understanding site fidelity is important in animal ecology, but evidence is lacking that this behaviour is due to an animal choosing a specific location. To discern site selection behaviour, it is necessary to consider the spatial distribution of habitats that animals can occupy within a landscape. Tracking animals and defining clear habitat boundaries, however, is often difficult. We use in situ habitat distribution data and animal movement simulations to investigate behavioural choice in site fidelity patterns. We resolved the difficulty of gathering data by working with intertidal rock pool systems, which are of manageable size and where boundaries are easy to define. Movements of the intertidal starfish Parvulastra exigua were quantified to test the hypotheses that (1) this species displays fidelity to a particular rock pool and that (2) rock pool fidelity is due to site selection behaviour. Observed patterns of individuals (n = 10 starfish) returning to a previously occupied rock pool (n = 5 pools per location) were tested against an expected null distribution generated through simulations of random movements within their natural patchy environment. Starfish exhibited site selection behaviour at only one location even though site fidelity was high (av. 7·4 starfish out of 10 found in test pools) in two of the three locations. The random chance of a starfish returning to a pool increased 67% for each metre further a rock pool was from the original pool, and 120% for each square metre increase in surface area of an original pool. The decision of returning to an original rock pool was influenced by food availability. When microalgal cover was >60%, there was a c. 50% chance of animals staying faithful to that pool. Our results show the importance to consider spatial distribution of habitats in understanding patterns of animal movement associated with animal choices and site fidelity. Returning to a particular place does not necessarily mean that an animal

  13. An overview of international siting programmes for radioactive waste disposal facilities: Possible lessons for Sweden

    International Nuclear Information System (INIS)

    Richardson, P.J.

    1994-01-01

    The purpose of this short report is to examine methodologies used in countries other than Sweden which are following a process of site selection for nuclear waste management and disposal facilities. It is planned here to identify possible countries and methodologies which may offer the authorities in Sweden suggestions for the future, and it is hoped that further work, possibly involving in-country visits and detailed reviews will follow. The end result of this exercise is to learn from the efforts (successes and/or mistakes) of other countries, thereby enabling Sweden to pursue a siting policy which involves as many stakeholders as possible, resulting in a programme which Swedish citizens can feel they truly own. First, the classification of siting methodologies is reviewed, both those of the past and those currently in use. Examples from programmes around the world are given. The distinction between Public Involvement and Public Participation in the siting process is discussed, in light of the programmes reviewed. Methodologies worthy of further study for adaptation to the Swedish situation are then highlighted in the context of a general discussion of the issues raised. Finally, a series of recommendations as to further investigations are given, which could be carried out as a part of this project. Particular methodologies in particular countries and their relevance to the Swedish situation are discussed. 66 refs

  14. Alcohol- and Drug-Involved Driving in the United States: Methodology for the 2007 National Roadside Survey

    Science.gov (United States)

    Lacey, John H.; Kelley-Baker, Tara; Voas, Robert B.; Romano, Eduardo; Furr-Holden, C. Debra; Torres, Pedro; Berning, Amy

    2011-01-01

    This article describes the methodology used in the 2007 U.S. National Roadside Survey to estimate the prevalence of alcohol- and drug-impaired driving and alcohol- and drug-involved driving. This study involved randomly stopping drivers at 300 locations across the 48 continental U.S. states at sites selected through a stratified random sampling…

  15. MUNICIPAL LANDFILL SITE SELECTION FOR ISFAHAN CITY BY USE OF FUZZY LOGIC AND ANALYTIC HIERARCHY PROCESS

    OpenAIRE

    A. Afzali; J. M. V. Samani; M. Rashid

    2011-01-01

    Selecting the most suitable site for landfill can avoid any ecological and socio-economical effects. The increase in industrial and economical development along with the increase of population growth in Isfahan city generates tremendous amount of solid waste within the region. Factors such as the scarcity of land, life span of landfill, and environmental considerations warrant that the scientific and fundamental studies are carried in selecting the suitability of a landfill site. The analysis...

  16. Gis-Based Site Selection for Underground Natural Resources Using Fuzzy Ahp-Owa

    Science.gov (United States)

    Sabzevari, A. R.; Delavar, M. R.

    2017-09-01

    Fuel consumption has significantly increased due to the growth of the population. A solution to address this problem is the underground storage of natural gas. The first step to reach this goal is to select suitable places for the storage. In this study, site selection for the underground natural gas reservoirs has been performed using a multi-criteria decision-making in a GIS environment. The "Ordered Weighted Average" (OWA) operator is one of the multi-criteria decision-making methods for ranking the criteria and consideration of uncertainty in the interaction among the criteria. In this paper, Fuzzy AHP_OWA (FAHP_OWA) is used to determine optimal sites for the underground natural gas reservoirs. Fuzzy AHP_OWA considers the decision maker's risk taking and risk aversion during the decision-making process. Gas consumption rate, temperature, distance from main transportation network, distance from gas production centers, population density and distance from gas distribution networks are the criteria used in this research. Results show that the northeast and west of Iran and the areas around Tehran (Tehran and Alborz Provinces) have a higher attraction for constructing a natural gas reservoir. The performance of the used method was also evaluated. This evaluation was performed using the location of the existing natural gas reservoirs in the country and the site selection maps for each of the quantifiers. It is verified that the method used in this study is capable of modeling different decision-making strategies used by the decision maker with about 88 percent of agreement between the modeling and test data.

  17. Site selection and design basis of the National Disposal Facility for LILW. Geological and engineering barriers

    International Nuclear Information System (INIS)

    Boyanov, S.

    2010-01-01

    Content of the presentation: Site selection; Characteristics of the “Radiana” site (location, geological structure, physical and mechanical properties, hydro-geological conditions); Design basis of the Disposal Facility; Migration analysis; Safety assessment approach

  18. Gorleben. Waste management site based on an appropriate selection procedure

    International Nuclear Information System (INIS)

    Tiggemann, Anselm

    2010-01-01

    On February 22, 1977, the Lower Saxony state government decided in favor of Gorleben as a ''preliminary'' site of a ''potential'' facility for managing the back end of the fuel cycle of the nuclear power plants in the Federal Republic of Germany. The Lower Saxony files, closed until recently, now allow both the factual basis and the political background to be reconstructed comprehensively. The first selection procedure, financed by the federal government, for the site of a ''nuclear waste management center,'' which had been conducted by Kernbrennstoff-Wiederaufarbeitungsgesellschaft (KEWA) in 1974, had not considered Gorleben in any detail. As early as in the winter of 1975/76, Gorleben and a number of other potential sites were indicated to KEWA by the Lower Saxony State Ministry of Economics. The new finding is KEWA's conclusion of 1976 that Gorleben surpassed all potential sites examined so far in terms of suitability. As a consequence, Gorleben was regarded as an alternative alongside the 3 sites favored before, i.e. Wahn, Lutterloh, and Lichtenhorst, when the 3 Federal Ministers, Hans Matthoefer (SPD), Werner Maihofer (F.D.P.), and Hans Friderichs (F.D.P.), discussed the nuclear waste management project with Minister President Albrecht (CDU) in November 1976. The Lower Saxony State Cabinet commissioned an interministerial working party (IMAK) to find other potential sites besides Wahn, Lutterloh, Lichtenhorst, and Gorleben. IMAK proposed Gorleben, Lichtenhorst, Mariaglueck, and Wahn for further examination. IMAK recommended to the State Cabinet in another proposal to earmark either Gorleben or Lichtenhorst. (orig.)

  19. A methodology for performing computer security reviews

    International Nuclear Information System (INIS)

    Hunteman, W.J.

    1991-01-01

    DOE Order 5637.1, ''Classified Computer Security,'' requires regular reviews of the computer security activities for an ADP system and for a site. Based on experiences gained in the Los Alamos computer security program through interactions with DOE facilities, we have developed a methodology to aid a site or security officer in performing a comprehensive computer security review. The methodology is designed to aid a reviewer in defining goals of the review (e.g., preparation for inspection), determining security requirements based on DOE policies, determining threats/vulnerabilities based on DOE and local threat guidance, and identifying critical system components to be reviewed. Application of the methodology will result in review procedures and checklists oriented to the review goals, the target system, and DOE policy requirements. The review methodology can be used to prepare for an audit or inspection and as a periodic self-check tool to determine the status of the computer security program for a site or specific ADP system. 1 tab

  20. A methodology for performing computer security reviews

    International Nuclear Information System (INIS)

    Hunteman, W.J.

    1991-01-01

    This paper reports on DIE Order 5637.1, Classified Computer Security, which requires regular reviews of the computer security activities for an ADP system and for a site. Based on experiences gained in the Los Alamos computer security program through interactions with DOE facilities, the authors have developed a methodology to aid a site or security officer in performing a comprehensive computer security review. The methodology is designed to aid a reviewer in defining goals of the review (e.g., preparation for inspection), determining security requirements based on DOE policies, determining threats/vulnerabilities based on DOE and local threat guidance, and identifying critical system components to be reviewed. Application of the methodology will result in review procedures and checklists oriented to the review goals, the target system, and DOE policy requirements. The review methodology can be used to prepare for an audit or inspection and as a periodic self-check tool to determine the status of the computer security program for a site or specific ADP system