WorldWideScience

Sample records for single-trait sheet recording

  1. An electrically resistive sheet of glial cells for amplifying signals of neuronal extracellular recordings

    Science.gov (United States)

    Matsumura, R.; Yamamoto, H.; Niwano, M.; Hirano-Iwata, A.

    2016-01-01

    Electrical signals of neuronal cells can be recorded non-invasively and with a high degree of temporal resolution using multielectrode arrays (MEAs). However, signals that are recorded with these devices are small, usually 0.01%-0.1% of intracellular recordings. Here, we show that the amplitude of neuronal signals recorded with MEA devices can be amplified by covering neuronal networks with an electrically resistive sheet. The resistive sheet used in this study is a monolayer of glial cells, supportive cells in the brain. The glial cells were grown on a collagen-gel film that is permeable to oxygen and other nutrients. The impedance of the glial sheet was measured by electrochemical impedance spectroscopy, and equivalent circuit simulations were performed to theoretically investigate the effect of covering the neurons with such a resistive sheet. Finally, the effect of the resistive glial sheet was confirmed experimentally, showing a 6-fold increase in neuronal signals. This technique feasibly amplifies signals of MEA recordings.

  2. A 25-year Record of Antarctic Ice Sheet Elevation and Mass Change

    Science.gov (United States)

    Shepherd, A.; Muir, A. S.; Sundal, A.; McMillan, M.; Briggs, K.; Hogg, A.; Engdahl, M.; Gilbert, L.

    2017-12-01

    Since 1992, the European Remote-Sensing (ERS-1 and ERS-2), ENVISAT, and CryoSat-2 satellite radar altimeters have measured the Antarctic ice sheet surface elevation, repeatedly, at approximately monthly intervals. These data constitute the longest continuous record of ice sheet wide change. In this paper, we use these observations to determine changes in the elevation, volume and mass of the East Antarctic and West Antarctic ice sheets, and of parts of the Antarctic Peninsula ice sheet, over a 25-year period. The root mean square difference between elevation rates computed from our survey and 257,296 estimates determined from airborne laser measurements is 54 cm/yr. The longevity of the satellite altimeter data record allows to identify and chart the evolution of changes associated with meteorology and ice flow, and we estimate that 3.6 % of the continental ice sheet, and 21.7 % of West Antarctica, is in a state of dynamical imbalance. Based on this partitioning, we estimate the mass balance of the East and West Antarctic ice sheet drainage basins and the root mean square difference between these and independent estimates derived from satellite gravimetry is less than 5 Gt yr-1.

  3. Evaluation of Randomly Selected Completed Medical Records Sheets in Teaching Hospitals of Jahrom University of Medical Sciences, 2009

    Directory of Open Access Journals (Sweden)

    Mohammad Parsa Mahjob

    2011-06-01

    Full Text Available Background and objective: Medical record documentation, often use to protect the patients legal rights, also providing information for medical researchers, general studies, education of health care staff and qualitative surveys is used. There is a need to control the amount of data entered in the medical record sheets of patients, considering the completion of these sheets is often carried out after completion of service delivery to the patients. Therefore, in this study the prevalence of completeness of medical history, operation reports, and physician order sheets by different documentaries in Jahrom teaching hospitals during year 2009 was analyzed. Methods and Materials: In this descriptive / retrospective study, the 400 medical record sheets of the patients from two teaching hospitals affiliated to Jahrom medical university was randomly selected. The tool of data collection was a checklist based on the content of medical history sheet, operation report and physician order sheets. The data were analyzed by SPSS (Version10 software and Microsoft Office Excel 2003. Results: Average of personal (Demography data entered in medical history, physician order and operation report sheets which is done by department's secretaries were 32.9, 35.8 and 40.18 percent. Average of clinical data entered by physician in medical history sheet is 38 percent. Surgical data entered by the surgeon in operation report sheet was 94.77 percent. Average of data entered by operation room's nurse in operation report sheet was 36.78 percent; Average of physician order data in physician order sheet entered by physician was 99.3 percent. Conclusion: According to this study, the rate of completed record papers reviewed by documentary in Jahrom teaching hospitals were not desirable and in some cases were very weak and incomplete. This deficiency was due to different reason such as medical record documentaries negligence, lack of adequate education for documentaries, High work

  4. Investigation of the working behavior of part-time occupational physicians using practical recording sheets.

    Science.gov (United States)

    Ikegami, Kazunori; Nozawa, Hiroki; Michii, Satoshi; Sugano, Ryosuke; Ando, Hajime; Hasegawa, Masayuki; Kitamura, Hiroko; Ogami, Akira

    2016-12-03

    We investigated the working behavior of part-time occupational physicians using practical recording sheets to clarify issues of occupational physicians' activities according to industrial groups or size of business. We collected 561 recording sheets in 96 industries from 11 part-time occupational physicians as collaborators, who volunteered to be a part of this research. We collected a variety of information from the practical recording sheets, including the industry in which each occupational physician was employed, the annual number of times of work attendance, occupational physician-conducted workplace patrol, and employee health management. We investigated their annual practices regarding work environment management, work management, health management, and general occupational health management. In addition, we analyzed the differences between the secondary and tertiary industry groups and between the group of offices employing 100 people or fewer (≤100 group) and 101 people and above (≥101 group) in each industry group. The median work attendance by all occupational physicians was four times a year; the tertiary industry group had a significantly lower rate of work attendance than the secondary industry group. The occupational physicians' participation in risk assessment, mental health measures or overwork prevention, and the formulation of the occupational health management system and the annual plan were significantly lower in the tertiary industry group than in the secondary industry group. We observed that for the annual number of times of work attendance, occupational physician-conducted workplace patrol was significantly lower in the ≤100 group than in the ≥101 group in each industry group. These findings show that occupational physicians' activities have not been conducted enough in tertiary industries and small-sized offices employing ≤100 people. It would be necessary to evaluate how to provide occupational health service or appropriate

  5. Extracting the respiration cycle lengths from ECG signal recorded with bed sheet electrodes

    Science.gov (United States)

    Vehkaoja, A.; Peltokangas, M.; Lekkala, J.

    2013-09-01

    A method for recognizing the respiration cycle lengths from the electrocardiographic (ECG) signal recorded with textile electrodes that are attached to a bed sheet is proposed. The method uses two features extracted from the ECG that are affected by the respiration: respiratory sinus arrhythmia and the amplitude of the R-peaks. The proposed method was tested in one hour long recordings with ten healthy young adults. A relative mean absolute error of 5.6 % was achieved when the algorithm was able to provide a result for approximately 40 % of the time. 90 % of the values were within 0.5 s and 97 % within 1 s from the reference respiration value. In addition to the instantaneous respiration cycle lengths, also the mean values during 1 and 5 minutes epochs are calculated. The effect of the ECG signal source is evaluated by calculating the result also from the simultaneously recorded reference ECG signal. The acquired respiration information can be used in the estimation of sleep quality and the detection of sleep disorders.

  6. Extracting the respiration cycle lengths from ECG signal recorded with bed sheet electrodes

    International Nuclear Information System (INIS)

    Vehkaoja, A; Peltokangas, M; Lekkala, J

    2013-01-01

    A method for recognizing the respiration cycle lengths from the electrocardiographic (ECG) signal recorded with textile electrodes that are attached to a bed sheet is proposed. The method uses two features extracted from the ECG that are affected by the respiration: respiratory sinus arrhythmia and the amplitude of the R-peaks. The proposed method was tested in one hour long recordings with ten healthy young adults. A relative mean absolute error of 5.6 % was achieved when the algorithm was able to provide a result for approximately 40 % of the time. 90 % of the values were within 0.5 s and 97 % within 1 s from the reference respiration value. In addition to the instantaneous respiration cycle lengths, also the mean values during 1 and 5 minutes epochs are calculated. The effect of the ECG signal source is evaluated by calculating the result also from the simultaneously recorded reference ECG signal. The acquired respiration information can be used in the estimation of sleep quality and the detection of sleep disorders

  7. Programme for Monitoring of the Greenland Ice Sheet (PROMICE): first temperature and ablation record

    NARCIS (Netherlands)

    van As, D.; Fausto, R.S.; Ahlström, A.P.; Andersen, S.B.; Andersen, M.L.; Citterio, M.; Edelvang, K.; Gravesen, P.; Machguth, H.; Nick, F.M.|info:eu-repo/dai/nl/328212164; Nielsen, S.; Weidick, A.

    2011-01-01

    The Greenland ice sheet is reacting to climate change. Yet, mass-budget estimates differ considerably, partly due to climatic variability and partly to uncertainties in the techniques of assessing mass change (IPCC 2007). Nevertheless, all recent estimates agree that the ice sheet is losing mass

  8. Use and Limitations of a Climate-Quality Data Record to Study Temperature Trends on the Greenland Ice Sheet

    Science.gov (United States)

    Hall, Dorothy K.; Comiso, Josefino C.; Shuman, Christopher A.; Koenig, Lora S.; DiGirolamo, Nicolo E.

    2011-01-01

    Enhanced melting of the Greenland Ice Sheet has been documented in recent literature along with surface-temperature increases measured using infrared satellite data since 1981. Using a recently-developed climate-quality data record, 11- and 12-year trends in the clear-sky ice-surface temperature (IST) of the Greenland Ice Sheet have been studied using the Moderate-Resolution Imaging Spectroradiometer (MODIS) IST product. Daily and monthly MODIS ISTs of the Greenland Ice Sheet beginning on 1 March 2000 and continuing through 31 December 2010 are now available at 6.25-km spatial resolution on a polar stereographic grid as described in Hall et al. (submitted). This record will be elevated in status to a climate-data record (CDR) when more years of data become available either from the MODIS on the Terra or Aqua satellites, or from the Visible Infrared Imager Radiometer Suite (VIIRS) to be launched in October 2011. Maps showing the maximum extent of melt for the entire ice sheet and for the six major drainage basins have been developed from the MODIS IST dataset. Twelve-year trends of the duration of the melt season on the ice sheet vary in different drainage basins with some basins melting progressively earlier over the course of the study period. Some (but not all) of the basins also show a progressively-longer duration of melt. IST 12-year trends are compared with in-situ data, and climate data from the Modern Era Retrospective-Analysis for Research and Applications (MERRA) Reanalysis.

  9. Lakes of the Huron basin: their record of runoff from the laurentide ice sheet

    Science.gov (United States)

    Michael Lewis, C. F.; Moore, Theodore C.; Rea, David K.; Dettman, David L.; Smith, Alison M.; Mayer, Larry A.

    The 189,000 km2 Huron basin is central in the catchment area of the present Laurentian Great Lakes that now drain via the St. Lawrence River to the North Atlantic Ocean. During deglaciation from 21-7.5 ka BP, and owing to the interactions of ice margin positions, crustal rebound and regional topography, this basin was much more widely connected hydrologically, draining by various routes to the Gulf of Mexico and Atlantic Ocean, and receiving overflows from lakes impounded north and west of the Great Lakes-Hudson Bay drainage divide. Early ice-marginal lakes formed by impoundment between the Laurentide Ice Sheet and the southern margin of the basin during recessions to interstadial positions at 15.5 and 13.2 ka BP. In each of these recessions, lake drainage was initially southward to the Mississippi River and Gulf of Mexico. In the first recession, drainage subsequently switched eastward along the ice margin to the North Atlantic Ocean. In the second recession, drainage continued southward through the Michigan basin, and later, eastward via the Ontario basin and Mohawk River valley to the North Atlantic Ocean. During the final retreat of ice in the Huron basin from 13 to 10 ka BP, proglacial lake drainage switched twice from the Michigan basin and the Mississippi River system to the North Atlantic via the Ontario basin and Mohawk River valley, finally diverting to the Champlain Sea in the St. Lawrence River valley at about 11.6 ka BP. New seismo- and litho-stratigraphic information with ostracode data from the offshore lacustrine sediments were integrated with the traditional data of shorelines, uplift histories of outlets, and radio-carbon-dated shallow-water evidence of transgressions and regressions to reconstruct the water level history and paleolimnological record for the northern Huron basin for the 11-7 ka BP period. Negative excursions in the δ18O isotopic composition of ostracodes and bivalves in southern Lake Michigan, southwestern Lake Huron and eastern

  10. Ice sheet - permafrost interactions inferred from the sedimentary record of Weichselian glaciation in Poland

    Science.gov (United States)

    Szuman, I.; Ewertowski, M.; Kasprzak, L.; Piotrowski, J. A.

    2012-04-01

    Permafrost in front of the Weichselian ice sheet and its re-appearance on deglaciated terrain after ice retreat is well established. More contentious is the occurrence of permafrost beneath the ice sheet and its influence on subglacial processes and ice sheet dynamic. Here, we present sedimentological evidence of frozen ground beneath the advancing Weichselian ice sheet in central-western Poland. Special focus is on macrostructures indicating permafrost within the subglacial till, at the contact to the underlying sediments and within those sediments. Fieldwork has been carried out in outcrops located between the LGM ice margin and the subsequent retreat phase (Poznan/Frankfurt Phase). In Tomice site there are frost-cracks, ice-wedge pseudomorphs and deformed load structures in outwash sand directly below a till layer. Numerous sandy and sandy-silty intraclasts with preserved internal lamination occur within the deposits. In Wojnowice, a large intraclast 5 m long and 1.5 m high is found within a subglacial till layer. Ice-wedge pseudomorphs occur at Kaszczor, Nietążkowo, Sława Śląska and Wojnowice sites, just beneath the subglacial tills. Furthermore, multiple meso-scale deformations such as vertical sandy and gravelly layers and glaciotectonic breccia suggesting that the ground was frozen during deformation are present in Skrzynki, Annowo and Trąbinek. Ductile deformations were also observed, especially within fine-grained sands. Contact zones between subglacial tills and the underlying sediments are highly variable, but erosional and deformational contacts hosting partly sheared intraclasts suggest that the bed was at least locally frozen. Subglacial permafrost strongly influenced sediment rheology and its response to glacial stresses. We suggest that glacitectonic deformation was controlled by the grain size-dependent amount of unfrozen water trapped in the permafrost. Fine-grained material would have relatively high content of free water and consequently

  11. High Arctic Holocene temperature record from the Agassiz ice cap and Greenland ice sheet evolution.

    Science.gov (United States)

    Lecavalier, Benoit S; Fisher, David A; Milne, Glenn A; Vinther, Bo M; Tarasov, Lev; Huybrechts, Philippe; Lacelle, Denis; Main, Brittany; Zheng, James; Bourgeois, Jocelyne; Dyke, Arthur S

    2017-06-06

    We present a revised and extended high Arctic air temperature reconstruction from a single proxy that spans the past ∼12,000 y (up to 2009 CE). Our reconstruction from the Agassiz ice cap (Ellesmere Island, Canada) indicates an earlier and warmer Holocene thermal maximum with early Holocene temperatures that are 4-5 °C warmer compared with a previous reconstruction, and regularly exceed contemporary values for a period of ∼3,000 y. Our results show that air temperatures in this region are now at their warmest in the past 6,800-7,800 y, and that the recent rate of temperature change is unprecedented over the entire Holocene. The warmer early Holocene inferred from the Agassiz ice core leads to an estimated ∼1 km of ice thinning in northwest Greenland during the early Holocene using the Camp Century ice core. Ice modeling results show that this large thinning is consistent with our air temperature reconstruction. The modeling results also demonstrate the broader significance of the enhanced warming, with a retreat of the northern ice margin behind its present position in the mid Holocene and a ∼25% increase in total Greenland ice sheet mass loss (∼1.4 m sea-level equivalent) during the last deglaciation, both of which have implications for interpreting geodetic measurements of land uplift and gravity changes in northern Greenland.

  12. A 220-year continuous record of volcanic H2SO4 in the Antarctic ice sheet

    Science.gov (United States)

    Legrand, M.; Delmas, R. J.

    1987-06-01

    Continuous H2SO4 profiles observed in snow from several Antarctic locations reveal four major volcanic events of the past two centuries (Agung, Krakatoa, Tambora and another large-scale event not recorded historically). Acid deposition and interhemispheric distribution mechanisms are quantified and then used to obtain an order of magnitude estimate for the H2SO4 emissions from these eruptions.

  13. Sea-level records from the U.S. mid-Atlantic constrain Laurentide Ice Sheet extent during Marine Isotope Stage 3.

    Science.gov (United States)

    Pico, T; Creveling, J R; Mitrovica, J X

    2017-05-30

    The U.S. mid-Atlantic sea-level record is sensitive to the history of the Laurentide Ice Sheet as the coastline lies along the ice sheet's peripheral bulge. However, paleo sea-level markers on the present-day shoreline of Virginia and North Carolina dated to Marine Isotope Stage (MIS) 3, from 50 to 35 ka, are surprisingly high for this glacial interval, and remain unexplained by previous models of ice age adjustment or other local (for example, tectonic) effects. Here, we reconcile this sea-level record using a revised model of glacial isostatic adjustment characterized by a peak global mean sea level during MIS 3 of approximately -40 m, and far less ice volume within the eastern sector of the Laurentide Ice Sheet than traditional reconstructions for this interval. We conclude that the Laurentide Ice Sheet experienced a phase of very rapid growth in the 15 kyr leading into the Last Glacial Maximum, thus highlighting the potential of mid-field sea-level records to constrain areal extent of ice cover during glacial intervals with sparse geological observables.

  14. Synthesis of a quarter-century of satellite and airborne altimetry records to resolve long-term ice sheet elevation change

    Science.gov (United States)

    Nilsson, J.; Paolo, F. S.; Simonsen, S.; Gardner, A. S.

    2017-12-01

    Satellite and airborne altimetry provide the longest continuous record from which the mass balance of the Antarctic ice sheet can be derived, starting with the launch of ERS-1 in 1992. Accurate knowledge of the long-term mass balance is vital for understanding the geophysical processes governing the ice sheet contribution to present day sea-level rise. However, this record is comprised of several different measurement systems, with different accuracies and varying resolution. This poses a major challenge on the interpretation and reconstruction of consistent elevation-change time series for determining long-term ice sheet trends and variability. Previous studies using data from multiple satellite altimetry missions have relied on a cross-calibration technique based on crossover bias analysis to merge records from different sensors. This methodology, though accurate, limits the spatial coverage to typical resolutions of 10-50 km, restricting the approach to regional or continental-wide studies. In this study, we present a novel framework for seamless integration of heterogeneous altimetry records, using an adaptive least-squares minimization technique. The procedure allows reconstructing time series at fine spatial (individual time series. We also perform an extensive analysis of the major corrections applied to raw satellite altimetry data to assess their overall effect on the estimated uncertainty. This methodology will allow us to determine robust long-term changes in the surface elevation of grounded Antarctic ice. Such a dataset will be invaluable to advancing ice sheet assimilation efforts and to disentangle causal mechanisms of modern ice sheet response to environmental forcing.

  15. Local processes and regional patterns - Interpreting a multi-decadal altimetry record of Greenland Ice Sheet changes

    Science.gov (United States)

    Csatho, B. M.; Schenk, A. F.; Babonis, G. S.; van den Broeke, M. R.; Kuipers Munneke, P.; van der Veen, C. J.; Khan, S. A.; Porter, D. F.

    2016-12-01

    This study presents a new, comprehensive reconstruction of Greenland Ice Sheet elevation changes, generated using the Surface Elevation And Change detection (SERAC) approach. 35-year long elevation-change time series (1980-2015) were obtained at more than 150,000 locations from observations acquired by NASA's airborne and spaceborne laser altimeters (ATM, LVIS, ICESat), PROMICE laser altimetry data (2007-2011) and a DEM covering the ice sheet margin derived from stereo aerial photographs (1970s-80s). After removing the effect of Glacial Isostatic Adjustment (GIA) and the elastic crustal response to changes in ice loading, the time series were partitioned into changes due to surface processes and ice dynamics and then converted into mass change histories. Using gridded products, we examined ice sheet elevation, and mass change patterns, and compared them with other estimates at different scales from individual outlet glaciers through large drainage basins, on to the entire ice sheet. Both the SERAC time series and the grids derived from these time series revealed significant spatial and temporal variations of dynamic mass loss and widespread intermittent thinning, indicating the complexity of ice sheet response to climate forcing. To investigate the regional and local controls of ice dynamics, we examined thickness change time series near outlet glacier grounding lines. Changes on most outlet glaciers were consistent with one or more episodes of dynamic thinning that propagates upstream from the glacier terminus. The spatial pattern of the onset, duration, and termination of these dynamic thinning events suggest a regional control, such as warming ocean and air temperatures. However, the intricate spatiotemporal pattern of dynamic thickness change suggests that, regardless of the forcing responsible for initial glacier acceleration and thinning, the response of individual glaciers is modulated by local conditions. We use statistical methods, such as principal

  16. An early Pleistocene Mg/Ca-δ18O record from the Gulf of Mexico: Evaluating ice sheet size and pacing in the 41-kyr world

    Science.gov (United States)

    Shakun, Jeremy D.; Raymo, Maureen E.; Lea, David W.

    2016-07-01

    Early Pleistocene glacial cycles in marine δ18O exhibit strong obliquity pacing, but there is a perplexing lack of precession variability despite its important influence on summer insolation intensity - the presumed forcing of ice sheet growth and decay according to the Milankovitch hypothesis. This puzzle has been explained in two ways: Northern Hemisphere ice sheets instead respond to insolation integrated over the summer, which is mostly controlled by obliquity, or anti-phased precession-driven variability in ice volume between the hemispheres cancels out in global δ18O, leaving the in-phase obliquity signal to dominate. We evaluated these ideas by reconstructing Laurentide Ice Sheet (LIS) meltwater discharge to the Gulf of Mexico from 2.55-1.70 Ma using foraminiferal Mg/Ca and δ18O. Our δ18Osw record displays six prominent anomalies, which likely reflect meltwater pulses, and they have several remarkable characteristics: (1) their presence suggests that the LIS expanded into the mid-latitudes numerous times; (2) they tend to occur or extend into interglacials in benthic δ18O; (3) they generally correlate with summer insolation intensity better than integrated insolation forcing; and (4) they are perhaps smaller in amplitude but longer in duration than their late Pleistocene counterparts, suggesting comparable total meltwater fluxes. Overall, these observations suggest that the LIS was large, sensitive to precession, and decoupled from marine δ18O numerous times during the early Pleistocene - observations difficult to reconcile with a straightforward interpretation of the early Pleistocene marine δ18O record as a proxy for Northern Hemisphere ice sheet size driven by obliquity forcing at high latitudes.

  17. A late glacial record of ice-sheet dynamics and melt supply recovered in the sediments of IODP Expedition 347 in the Baltic Sea

    Science.gov (United States)

    Passchier, Sandra; Jensen, Jørn Bo; Kenzler, Michael; Johnson, Sean; Andrén, Thomas; Barker Jørgensen, Bo

    2015-04-01

    Modern observations of increased surface ablation, meltwater routing to the bed, and increases in glacial speeds point to feedbacks between ice-sheet dynamics, melt supply, and subglacial discharge. Paleorecords have the potential to explore the decadal to centennial variability of these systems, but until recently such records were short and discontinuous in ice-proximal settings and underutilized for this specific purpose. The Integrated Ocean Drilling Program Expedition 347 in the Baltic Sea recovered annually laminated sediments that document the dynamics of the Scandinavian Ice Sheet. Hydraulic piston cores recovered from Sites M0060, M0063, M0064, and M0065 allow us to reconstruct a nearly complete record of ca. 6000 years in ice retreat history at annual to decadal resolution between ca. 17 and 11ka. The late glacial successions of these four IODP drillsites comprise of a till or proglacial fluvioglacial sediment overlain by variable thicknesses of well-laminated deglacial successions within several high-recovery holes. As the Scandinavian Ice Sheet retreated from the western Baltic Sea, and to the North, the ice-sheet's grounding line migrated across the four sites and deposited overlapping sections of high-resolution ice-proximal to ice-distal successions. Laser particle size results from Sites M0060 and M0063, and inspection of line-scan images, show shifts in sedimentary facies and lithologies that were not recognized during initial visual core description. For example, at Site M0060 in the Kattegat, ice-rafting fluxes in silty clays decrease upward and are negligible in the overlying varved succession. These characteristics are interpreted as ice retreat within a calving bay environment from ca. 17ka onward, followed by distal glacial marine deposition from sediment plumes governed by meltwater discharge. Moreover, at Site M0063 in the Baltic Sea, laser particle size distributions record an abrupt shift from interlaminated clayey silt to laminated clay

  18. Large surface meltwater discharge from the Kangerlussuaq sector of the Greenland ice sheet during the record-warm year 2010 explained by detailed energy balance observations

    Directory of Open Access Journals (Sweden)

    D. van As

    2012-02-01

    Full Text Available This study uses data from six on-ice weather stations, calibrated MODIS-derived albedo and proglacial river gauging measurements to drive and validate an energy balance model. We aim to quantify the record-setting positive temperature anomaly in 2010 and its effect on mass balance and runoff from the Kangerlussuaq sector of the Greenland ice sheet. In 2010, the average temperature was 4.9 °C (2.7 standard deviations above the 1974–2010 average in Kangerlussuaq. High temperatures were also observed over the ice sheet, with the magnitude of the positive anomaly increasing with altitude, particularly in August. Simultaneously, surface albedo was anomalously low in 2010, predominantly in the upper ablation zone. The low albedo was caused by high ablation, which in turn profited from high temperatures and low winter snowfall. Surface energy balance calculations show that the largest melt excess (∼170% occurred in the upper ablation zone (above 1000 m, where higher temperatures and lower albedo contributed equally to the melt anomaly. At lower elevations the melt excess can be attributed to high atmospheric temperatures alone. In total, we calculate that 6.6 ± 1.0 km3 of surface meltwater ran off the ice sheet in the Kangerlussuaq catchment in 2010, exceeding the reference year 2009 (based on atmospheric temperature measurements by ∼150%. During future warm episodes we can expect a melt response of at least the same magnitude, unless a larger wintertime snow accumulation delays and moderates the melt-albedo feedback. Due to the hypsometry of the ice sheet, yielding an increasing surface area with elevation, meltwater runoff will be further amplified by increases in melt forcings such as atmospheric heat.

  19. Reconstructing the last British-Irish Ice Sheet from continental shelf records: initial results from BRITICE-CHRONO

    Science.gov (United States)

    O'Cofaigh, Colm; Benetti, Sara; Callard, S. Louise; Chiverell, Richard; Clark, Chris D.; Livingstone, Stephen; Praeg, Daniel; Saher, Margot; Scourse, James; van Landeghem, Katrien

    2015-04-01

    BRITICE-CHRONO is a large UK NERC-funded project that aims to constrain the timing and rate of retreat of the last British-Irish Ice Sheet (BIIS). Although the pattern of ice sheet retreat is reasonably well established the retreat chronology remains poorly constrained for many areas, particularly offshore. In BRITICE-CHRONO marine and terrestrial samples are being collected for dating along a series of 8 transects extending from the continental shelf edge to a few tens of kilometres onshore. The transects will yield over 800 new dates, which will be combined with existing age and landform information to undertake an ice-sheet wide empirical reconstruction of the demise of the BIIS as it underwent the transition from marine-terminating margins to being entirely land-based. This talk will present an overview of the project and highlight some of the key scientific findings from the first of two research cruises that form a central part of the project. Cruise JC106 of the RRS James Cook took place in 2014 and circumnavigated Ireland, surveying and sampling in the Celtic Sea, Irish Sea, Malin Sea, Donegal Bay and the shelf offshore of western Ireland, including the Porcupine Bank. During the 38 day cruise over 220 cores were collected as well as extensive geophysical datasets (sub-bottom profiles and swath bathymetry). Analysis of these data is now underway and is yielding important new insights into the extent, retreat style, chronology and depositional environments associated with the BIIS during and following the Last Glacial Maximum. A second cruise, planned for the summer 2015, will survey and sample the continental shelf north of Scotland and the North Sea.

  20. RD-674B/UNH and RD-68lA/UNH Recorder-Reproducer Information Sheets

    National Research Council Canada - National Science Library

    Durkin, Matthew

    2000-01-01

    .... The system can be housed in a standard ElA cabinet with a 19-inch rack configuration. A major advantage of the RD-68IA/UNH is that audio recording need not be interrupted to provide simultaneous...

  1. 220-year continuous record of volcanic H/sub 2/SO/sub 4/ in the Antarctic ice sheet

    Energy Technology Data Exchange (ETDEWEB)

    Legrand, M.; Delmas, R.J.

    1987-06-25

    Continuous H/sub 2/SO/sub 4/ profiles observed in snow from several Antarctic locations reveal four major volcanic events of the past two centuries (Agung, Krakatoa, Tambora and another large-scale event not recorded historically). Acid deposition and interhemispheric distribution mechanisms are quantified and then used to obtain an order of magnitude estimate for the H/sub 2/SO/sub 4/ emissions from these eruptions.

  2. A dust record from Permo-Pennsylvanian shallow-water carbonates of Iran: Glacial-interglacial variation proximal to the Gondwanan ice sheets

    Science.gov (United States)

    Sardar Abadi, M.; Soreghan, G. S.

    2017-12-01

    The Late Paleozoic was earth's longest Phanerozoic glaciation, with ice sheets ultimately covering large parts of the Gondwanan continent, to latitudes as low as 32°S during peak icehouse conditions (Evans, 2003). Here we focus on the sedimentology, paleoecology and dust record of strata of the Central Persian Terrane (CPT) that accumulated during the Middle Pennsylvanian to earliest Permian acme of the Late Paleozoic Ice Age (LPIA). The CPT was located along the northern Gondwanan margin, within the Paleo-Tethyan ocean at 30º S. Despite its mid-latitude paleoposition, the mid-Pennsylvanian of the Absheni Formation (Sanandaj-Sirjan Zone) preserves calcareous (formerly aragonitic) green algae, clotted micritic textures indicative of microbial carbonate precipitation, and extensive oolitic carbonates that record CaCO3 supersaturation. The earliest Permian interval of the Emarat Formation (Alborz Basin) consists of thick algally coated oncolitic limestone, also present in correlative strata of the CPT. No evidence exists for fluvial or deltaic influences in these strata; rather, these data indicate warm-water conditions across an extensive shallow-water carbonate system. This setting contrasts strikingly with the glacial conditions recorded in, e.g. coeval strata of the Arabian plate (within 1000 km). The juxtaposition of such contrasting lithologic records can perhaps be reconciled with a warm-water Paleotethyan current that promoted larval dispersal to higher southern latitudes. The non-authigenic silicate fractions extracted from these carbonates record atmospheric dust and comprise quartz, clay, trace feldspar and heavy minerals. The weight % dust from these carbonates varies from 0.15% to 25.5% with peak values in proximity to inferred sequence boundaries (glacial lowstands), and covary with values of detrital (dust) proxies (Ti, Sr, K, Al, Zr) and magnetic susceptibility (χin). Although awaiting MAR estimates, preliminary observations indicate increased

  3. The last British-Irish Ice Sheet: A data-rich environment for ice sheet modelling

    Science.gov (United States)

    Ely, Jeremy; Clark, Chris; Hindmarsh, Richard; Bradley, Sarah

    2017-04-01

    In order to simulate the future dynamics of the Greenland and Antarctic ice sheets, robust numerical models validated by observations of past ice sheet behaviour are required. The extent and dynamics of contemporary ice sheets have been observed at a decadal scale. But a much longer record of ice sheet behaviour (10 ka) can be collated by studying the evidence left behind by palaeo-ice sheets. Extensive geomorphological and geochronological evidence for the past behaviour of the last British-Irish Ice Sheet has been gathered through over 150 years of research and BRITICE-CHRONO, a recent consortium project. This large volume of empirical evidence makes the last British-Irish Ice Sheet one of the best constrained palaeo-ice sheets in the world, and a data-rich environment for ice sheet modelling experiments. Yet, integrating this data and its associated uncertainty and abstraction into ice sheet modelling experiments remains challenging. Here we summarise the available geomorphological and geochronological data and discuss how this will be integrated into ice sheet modelling experiments. Several packages of data, each with its own associated level of interpretation (ranging from raw data to empirically reconstructed ice sheet margins), will be made available to the ice-sheet modelling community. Furthermore, we demonstrate our approach to simulating the empirically reconstructed behaviour of the British-Irish Ice Sheet through a series of ice sheet modelling experiments which account for relative sea level change, and uncertainty in empirically reconstructed ice sheet extent.

  4. 37 CFR 3.31 - Cover sheet content.

    Science.gov (United States)

    2010-07-01

    ... the cover sheet must either: (i) Place a symbol comprised of letters, numbers, and/or punctuation... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Cover sheet content. 3.31... COMMERCE GENERAL ASSIGNMENT, RECORDING AND RIGHTS OF ASSIGNEE Cover Sheet Requirements § 3.31 Cover sheet...

  5. Changes in sea ice cover and ice sheet extent at the Yermak Plateau during the last 160 ka - Reconstructions from biomarker records

    Science.gov (United States)

    Kremer, A.; Stein, R.; Fahl, K.; Ji, Z.; Yang, Z.; Wiers, S.; Matthiessen, J.; Forwick, M.; Löwemark, L.; O'Regan, M.; Chen, J.; Snowball, I.

    2018-02-01

    The Yermak Plateau is located north of Svalbard at the entrance to the Arctic Ocean, i.e. in an area highly sensitive to climate change. A multi proxy approach was carried out on Core PS92/039-2 to study glacial-interglacial environmental changes at the northern Barents Sea margin during the last 160 ka. The main emphasis was on the reconstruction of sea ice cover, based on the sea ice proxy IP25 and the related phytoplankton - sea ice index PIP25. Sea ice was present most of the time but showed significant temporal variability decisively affected by movements of the Svalbard Barents Sea Ice Sheet. For the first time, we prove the occurrence of seasonal sea ice at the eastern Yermak Plateau during glacial intervals, probably steered by a major northward advance of the ice sheet and the formation of a coastal polynya in front of it. Maximum accumulation of terrigenous organic carbon, IP25 and the phytoplankton biomarkers (brassicasterol, dinosterol, HBI III) can be correlated to distinct deglaciation events. More severe, but variable sea ice cover prevailed at the Yermak Plateau during interglacials. The general proximity to the sea ice margin is further indicated by biomarker (GDGT) - based sea surface temperatures below 2.5 °C.

  6. Large surface meltwater discharge from the Kangerlussuaq sector of the Greenland ice sheet during the record-warm year 2010 explained by detailed energy balance observations

    NARCIS (Netherlands)

    van As, D.; Hubbard, A.L.; Hasholt, B.; Mikkelsen, A.B.; van den Broeke, M.R.|info:eu-repo/dai/nl/073765643; Fausto, R.S.

    2012-01-01

    This study uses data from six on-ice weather stations, calibrated MODIS-derived albedo and proglacial river gauging measurements to drive and validate an energy balance model. We aim to quantify the record-setting positive temperature anomaly in 2010 and its effect on mass balance and runoff from

  7. On the new record of the sheet-web spider Erigonoplus foveatus comb. nov. from Slovakia, with comments on Erigonoplus simplex (Araneae: Linyphiidae

    Directory of Open Access Journals (Sweden)

    Hollá, Katarína

    2016-04-01

    Full Text Available Mecynargus foveatus (Dahl, 1912 was recorded in the territory of Slovakia for the first time. Within two years of spider research, a single adult male was collected by beating branches of Scots pine (Pinus sylvestris in the Borská nížina lowland. We also discovered that specimens of Erigonoplus simplex Millidge, 1979 from Bulgaria were misidentified as M. foveatus. Therefore, we suggest to consider E. simplex as a new record for Bulgaria and to exclude M. foveatus from the spider fauna of Bulgaria. A revised distribution of both species is presented and discussed. Based on the high similarity to Erigonoplus, M. foveatus is transferred to this genus as Erigonoplus foveatus (Dahl, 1912 comb. nov.

  8. GASN sheets

    International Nuclear Information System (INIS)

    2013-12-01

    This document gathers around 50 detailed sheets which describe and present various aspects, data and information related to the nuclear sector or, more generally to energy. The following items are addressed: natural and artificial radioactive environment, evolution of energy needs in the world, radioactive wastes, which energy for France tomorrow, the consequences in France of the Chernobyl accident, ammunitions containing depleted uranium, processing and recycling of used nuclear fuel, transport of radioactive materials, seismic risk for the basic nuclear installations, radon, the precautionary principle, the issue of low doses, the EPR, the greenhouse effect, the Oklo nuclear reactors, ITER on the way towards fusion reactors, simulation and nuclear deterrence, crisis management in the nuclear field, does nuclear research put a break on the development of renewable energies by monopolizing funding, nuclear safety and security, the plutonium, generation IV reactors, comparison of different modes of electricity production, medical exposure to ionizing radiations, the control of nuclear activities, food preservation by ionization, photovoltaic solar collectors, the Polonium 210, the dismantling of nuclear installations, wind energy, desalination and nuclear reactors, from non-communication to transparency about nuclear safety, the Jules Horowitz reactor, CO 2 capture and storage, hydrogen, solar energy, the radium, the subcontractors of maintenance of the nuclear fleet, biomass, internal radio-contamination, epidemiological studies, submarine nuclear propulsion, sea energy, the Three Mile Island accident, the Chernobyl accident, the Fukushima accident, the nuclear after Fukushima

  9. Mid-Burdigalian Paratethyan alkenone record reveals link between orbital forcing, Antarctic ice-sheet dynamics and European climate at the verge to Miocene Climate Optimum.

    Science.gov (United States)

    Grunert, Patrick; Tzanova, Alexandrina; Harzhauser, Mathias; Piller, Werner E

    2014-12-01

    The Early Ottnangian Cooling (EOC), a distinct cold-spell in European climate at ~ 18 Ma preceding the Miocene Climate Optimum, is frequently reported in Paratethys records; however, the duration, magnitude, and underlying causes are poorly understood. A new palaeoclimatic data-set provides unexpected insights into this event. U K' 37 -based sea-surface temperatures > 24 °C between ~ 18.1 and 17.7 Myrs substantially exceed existing estimates, and indicate a significantly warmer European climate than previously assumed for this usually poorly recovered time interval. The EOC is expressed as an average drop of 2-3 °C in Paratethyan water temperatures between ~ 18.1 and 17.8 Myrs with two distinct cold snaps at ~ 17.86 Ma and ~ 17.81 Ma. The short duration of the EOC excludes Tethyan Seaway closure as its underlying cause, although the enhanced palaeoclimatic sensitivity of the Paratethys due to this palaeogeographic configuration potentially contributed to the magnitude of SST deterioration during the EOC. The revealed palaeoclimatic pattern shows a strong correlation with isotope event Mi-1b in deep-sea δ 18 O records, and we propose a tight palaeoclimatic link between the Southern Ocean and the Paratethys/Mediterranean realm as an alternative hypothesis. The interplay of modulations in the long-term (~ 400 kyrs) and short-term (~ 100 kyrs) eccentricity cycles most likely acted as pacemaker of this palaeoclimatic interaction.

  10. Soldering sheets using soft solders

    Directory of Open Access Journals (Sweden)

    Milan Brožek

    2013-01-01

    Full Text Available The paper contains strength tests results of joints soldered using lead and leadless soft solders. For tests lead solders types Pb60Sn40 and Sn60Pb40 and leadless soft solders types Sn95.5Ag3.8Cu0.7 and Sn96Ag4 were used. As basic materials steel sheet, zinc-coated steel sheet, copper sheet and brass sheet 100 x 20 x 1 mm was the test samples size. Always two sheets were cleaned and jointed together. For heating the propane-butane + air flame was used. Then the tested assemblies were loaded using the universal tensile-strength testing machine till to failure. At the tests the force needed for assemblies failure and failure type (in soldered joint, in basic material were recorded. From measured data the solder strength was calculated. From the experiment results it follows that from the point of view of the soldered joints strength as well of the solder strength relatively small differences were found. At the same time it is evident that the joint strength and solder strength depend on soldered material type and on soldered joint lapping length. On the basis of carried out experiments it can be stated that the substitution of lead solders by leadless solders is possible without risk of soldered joints strength decrease.

  11. Surface elevation changes of the greenland ice sheet - results from ESA'S ice sheet CCI

    DEFF Research Database (Denmark)

    Fredenslund Levinsen, Joanna; Khvorostovky, Kirill; Meister, Rakia

    2013-01-01

    In order to ensure long-term climate data records for the Greenland Ice Sheet (GIS), ESA have launched the Climate Change Initiative (CCI). This work presents the preliminary steps towards the Ice Sheet CCI's surface elevation change (SEC) derivation using radar altimeter data. In order to find...

  12. Surface elevation changes of the greenland ice sheet - results from ESA'S ice sheet CCI

    DEFF Research Database (Denmark)

    Fredenslund Levinsen, Joanna; Khvorostovky, Kirill; Meister, Rakia

    2013-01-01

    In order to ensure long-term climate data records for the Greenland Ice Sheet (GIS), ESA have launched the Climate Change Initiative (CCI). This work presents the preliminary steps towards the Ice Sheet CCI's surface elevation change (SEC) derivation using radar altimeter data. In order to find t...

  13. Cholera Fact Sheet

    Science.gov (United States)

    ... sheets Fact files Questions & answers Features Multimedia Contacts Cholera Fact sheet Updated December 2017 Key facts Cholera ... behaviour and to the control of cholera. Oral cholera vaccines Currently there are three WHO pre-qualified ...

  14. Technology to Market Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-01

    This fact sheet is an overview of the Technology to Market subprogram at the U.S. Department of Energy SunShot Initiative. The SunShot Initiative’s Technology to Market subprogram builds on SunShot’s record of moving groundbreaking and early-stage technologies and business models through developmental phases to commercialization. Technology to Market targets two known funding gaps: those that occur at the prototype commercialization stage and those at the commercial scale-up stage.

  15. Single-trait and multi-trait genome-wide association analyses identify novel loci for blood pressure in African-ancestry populations.

    Directory of Open Access Journals (Sweden)

    Jingjing Liang

    2017-05-01

    Full Text Available Hypertension is a leading cause of global disease, mortality, and disability. While individuals of African descent suffer a disproportionate burden of hypertension and its complications, they have been underrepresented in genetic studies. To identify novel susceptibility loci for blood pressure and hypertension in people of African ancestry, we performed both single and multiple-trait genome-wide association analyses. We analyzed 21 genome-wide association studies comprised of 31,968 individuals of African ancestry, and validated our results with additional 54,395 individuals from multi-ethnic studies. These analyses identified nine loci with eleven independent variants which reached genome-wide significance (P < 1.25×10-8 for either systolic and diastolic blood pressure, hypertension, or for combined traits. Single-trait analyses identified two loci (TARID/TCF21 and LLPH/TMBIM4 and multiple-trait analyses identified one novel locus (FRMD3 for blood pressure. At these three loci, as well as at GRP20/CDH17, associated variants had alleles common only in African-ancestry populations. Functional annotation showed enrichment for genes expressed in immune and kidney cells, as well as in heart and vascular cells/tissues. Experiments driven by these findings and using angiotensin-II induced hypertension in mice showed altered kidney mRNA expression of six genes, suggesting their potential role in hypertension. Our study provides new evidence for genes related to hypertension susceptibility, and the need to study African-ancestry populations in order to identify biologic factors contributing to hypertension.

  16. Orientation and Morphology Effects in Rapid Silicon Sheet Solidification

    Science.gov (United States)

    Ciszek, T. F.

    1984-01-01

    Radial growth anisotropies and equilibrium forms of point nucleated, dislocation free silicon sheets spreading horizontally on the free surface of a silicon melt were measured for (100), (110), (111), and (112) sheet planes. The growth process was recorded. Qualitative Wulff surface free energy polar plots were deduced from the equilibrium shapes for each sheet plane. Predicted geometries for the tip shape of unidirectional, dislocation free, horizontally grown sheets growing in various directions within the planes were analyzed. Polycrystalline sheets and dendrite propagation were analyzed. For dendrites, growth rates on the order of 2.5 m/min and growth rate anisotropies of 25 are measured.

  17. Ice sheet in peril

    DEFF Research Database (Denmark)

    Hvidberg, Christine Schøtt

    2016-01-01

    Earth's large ice sheets in Greenland and Antarctica are major contributors to sea level change. At present, the Greenland Ice Sheet (see the photo) is losing mass in response to climate warming in Greenland (1), but the present changes also include a long-term response to past climate transitions...

  18. E12 sheet plastination: Techniques and applications.

    Science.gov (United States)

    Ottone, Nicolas Ernesto; Baptista, Carlos A C; Latorre, Rafael; Bianchi, Homero Felipe; Del Sol, Mariano; Fuentes, Ramon

    2017-10-30

    Plastination is an anatomical technique that consists of replacing the liquids and fat of specimens by reactive polymers through forced impregnation in a vacuum. These are then polymerized to achieve the final result. E12 sheet plastination involves epoxy resin impregnation of thin (2-4 mm) and ultra-thin (<2 mm) tissue sheets, producing dry, transparent, odorless, non-toxic and long-lasting sheets. E12 sheet plastination techniques were reviewed using MEDLINE, EMBASE and SciELO databases, and manual searches. After searching, 616 records were found using the online and manual searches (MEDLINE, n: 207; EMBASE, n: 346; SciELO, n: 44; Manual search: 23). Finally, 96 records were included in this review (after duplicates and articles unrelated to the subject were excluded). The aim of this work was to review the E12 sheet plastination technique, searching for articles concerning views of it, identifying the different variants implemented by researchers since its creation by Gunther von Hagens, and to identify its applications from teaching and research in anatomy to morphological sciences. Clin. Anat., 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  19. Anesthesia Fact Sheet

    Science.gov (United States)

    ... Education About NIGMS NIGMS Home > Science Education > Anesthesia Anesthesia Tagline (Optional) Middle/Main Content Area En español ... Version (464 KB) Other Fact Sheets What is anesthesia? Anesthesia is a medical treatment that prevents patients ...

  20. Global ice sheet modeling

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, T.J.; Fastook, J.L. [Univ. of Maine, Orono, ME (United States). Institute for Quaternary Studies

    1994-05-01

    The University of Maine conducted this study for Pacific Northwest Laboratory (PNL) as part of a global climate modeling task for site characterization of the potential nuclear waste respository site at Yucca Mountain, NV. The purpose of the study was to develop a global ice sheet dynamics model that will forecast the three-dimensional configuration of global ice sheets for specific climate change scenarios. The objective of the third (final) year of the work was to produce ice sheet data for glaciation scenarios covering the next 100,000 years. This was accomplished using both the map-plane and flowband solutions of our time-dependent, finite-element gridpoint model. The theory and equations used to develop the ice sheet models are presented. Three future scenarios were simulated by the model and results are discussed.

  1. Global ice sheet modeling

    International Nuclear Information System (INIS)

    Hughes, T.J.; Fastook, J.L.

    1994-05-01

    The University of Maine conducted this study for Pacific Northwest Laboratory (PNL) as part of a global climate modeling task for site characterization of the potential nuclear waste respository site at Yucca Mountain, NV. The purpose of the study was to develop a global ice sheet dynamics model that will forecast the three-dimensional configuration of global ice sheets for specific climate change scenarios. The objective of the third (final) year of the work was to produce ice sheet data for glaciation scenarios covering the next 100,000 years. This was accomplished using both the map-plane and flowband solutions of our time-dependent, finite-element gridpoint model. The theory and equations used to develop the ice sheet models are presented. Three future scenarios were simulated by the model and results are discussed

  2. Structural Biology Fact Sheet

    Science.gov (United States)

    ... beta sheets (blue; thinner, tangled strands). Credit: RCSB Protein Data Bank. Even though proteins are strings of amino acids, ... structure of more than 122,000 proteins. The Protein Data Bank stores these structures and gives scientists access to ...

  3. Sepsis Fact Sheet

    Science.gov (United States)

    ... Education About NIGMS NIGMS Home > Science Education > Sepsis Sepsis Tagline (Optional) Middle/Main Content Area PDF Version ( ... KB) En español Other Fact Sheets What is sepsis? Sepsis is a serious medical condition. It is ...

  4. Respirator Fact Sheet

    Science.gov (United States)

    ... to protect myself, my family, and/or my employees? If available and used correctly, a respirator can ... Respirator Fact Sheet [PDF - 706 KB] Follow NIOSH Facebook Flickr Pinterest Twitter YouTube NIOSH Homepage NIOSH A- ...

  5. Energy information sheets

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

  6. Exploring Deliberate Practice & the Use of Skill Sheets in the Collegiate Leadership Competition

    Science.gov (United States)

    Allen, Scott J.; Jenkins, Daniel M.; Krizanovic, Bela

    2018-01-01

    Little has been written about the use of skill sheets in leadership education and this paper demonstrates how they have been implemented in one specific context. Used in a number of domains (e.g., karate, cardiopulmonary resuscitation) skill sheets are checklists or rubrics that record skill performance. The use of skill sheets in leadership…

  7. Understanding Recent Mass Balance Changes of the Greenland Ice Sheet

    Science.gov (United States)

    vanderVeen, Cornelius

    2003-01-01

    The ultimate goal of this project is to better understand the current transfer of mass between the Greenland Ice Sheet, the world's oceans and the atmosphere, and to identify processes controlling the rate of this transfer, to be able to predict with greater confidence future contributions to global sea level rise. During the first year of this project, we focused on establishing longer-term records of change of selected outlet glaciers, reevaluation of mass input to the ice sheet and analysis of climate records derived from ice cores, and modeling meltwater production and runoff from the margins of the ice sheet.

  8. Safety advice sheets

    CERN Multimedia

    HSE Unit

    2013-01-01

    You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

  9. Energy information sheets

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-02

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

  10. Ice Sheets & Ice Cores

    DEFF Research Database (Denmark)

    Mikkelsen, Troels Bøgeholm

    Since the discovery of the Ice Ages it has been evident that Earth’s climate is liable to undergo dramatic changes. The previous climatic period known as the Last Glacial saw large oscillations in the extent of ice sheets covering the Northern hemisphere. Understanding these oscillations known...

  11. Pseudomonas - Fact Sheet

    OpenAIRE

    Public Health Agency

    2012-01-01

    Fact sheet on Pseudomonas, including:What is Pseudomonas?What infections does it cause?Who is susceptible to pseudomonas infection?How will I know if I have pseudomonas infection?How can Pseudomonas be prevented from spreading?How can I protect myself from Pseudomonas?How is Pseudomonas infection treated?

  12. Collisionless current sheet equilibria

    Science.gov (United States)

    Neukirch, T.; Wilson, F.; Allanson, O.

    2018-01-01

    Current sheets are important for the structure and dynamics of many plasma systems. In space and astrophysical plasmas they play a crucial role in activity processes, for example by facilitating the release of magnetic energy via processes such as magnetic reconnection. In this contribution we will focus on collisionless plasma systems. A sensible first step in any investigation of physical processes involving current sheets is to find appropriate equilibrium solutions. The theory of collisionless plasma equilibria is well established, but over the past few years there has been a renewed interest in finding equilibrium distribution functions for collisionless current sheets with particular properties, for example for cases where the current density is parallel to the magnetic field (force-free current sheets). This interest is due to a combination of scientific curiosity and potential applications to space and astrophysical plasmas. In this paper we will give an overview of some of the recent developments, discuss their potential applications and address a number of open questions.

  13. Ethanol Basics (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2015-01-01

    Ethanol is a widely-used, domestically-produced renewable fuel made from corn and other plant materials. More than 96% of gasoline sold in the United States contains ethanol. Learn more about this alternative fuel in the Ethanol Basics Fact Sheet, produced by the U.S. Department of Energy's Clean Cities program.

  14. Rubella - Fact Sheet for Parents

    Science.gov (United States)

    ... and 4 through 6 years Fact Sheet for Parents Color [2 pages] Español: Rubéola The best way ... according to the recommended schedule. Fact Sheets for Parents Diseases and the Vaccines that Prevent Them Chickenpox ...

  15. Enhanced ice sheet melting driven by volcanic eruptions during the last deglaciation.

    Science.gov (United States)

    Muschitiello, Francesco; Pausata, Francesco S R; Lea, James M; Mair, Douglas W F; Wohlfarth, Barbara

    2017-10-24

    Volcanic eruptions can impact the mass balance of ice sheets through changes in climate and the radiative properties of the ice. Yet, empirical evidence highlighting the sensitivity of ancient ice sheets to volcanism is scarce. Here we present an exceptionally well-dated annual glacial varve chronology recording the melting history of the Fennoscandian Ice Sheet at the end of the last deglaciation (∼13,200-12,000 years ago). Our data indicate that abrupt ice melting events coincide with volcanogenic aerosol emissions recorded in Greenland ice cores. We suggest that enhanced ice sheet runoff is primarily associated with albedo effects due to deposition of ash sourced from high-latitude volcanic eruptions. Climate and snowpack mass-balance simulations show evidence for enhanced ice sheet runoff under volcanically forced conditions despite atmospheric cooling. The sensitivity of past ice sheets to volcanic ashfall highlights the need for an accurate coupling between atmosphere and ice sheet components in climate models.

  16. Single sheet iron oxides

    DEFF Research Database (Denmark)

    Yin, Zhou

    activity. LDH single sheets have been reported to be effective sorbents, catalysts in electrochemical and photochemical reactions, and building thin films together with other nanomaterials for designing new functionalities. Here we focus on the delamination of FeII-FeIII LDHs into single sheet iron oxide...... was rapid compared to other iron oxides, reaching equilibrium within 60 minutes. Arsenic sorption and acid-base titration data could be successfully described with a 1pk Basic Stern Model (BSM). The point of zero charge was around 8. The intrinsic surface complexation equilibrium constants (log K...... became abundant at low pH. (3) Electrochemical reduction of chlorinated compounds using an SSI modified electrode. Here, the electrochemical reactivity of SSIs coated on indium tin oxide coated glass electrodes was investigated. Iron on the SSI modified electrode showed a typical Cyclic Voltammetry...

  17. Film sheet cassette

    International Nuclear Information System (INIS)

    1981-01-01

    A novel film sheet cassette is described for handling CAT photographic films under daylight conditions and facilitating their imaging. A detailed description of the design and operation of the cassette is given together with appropriate illustrations. The resulting cassette is a low-cost unit which is easily constructed and yet provides a sure light-tight seal for the interior contents of the cassette. The individual resilient fingers on the light-trap permit the ready removal of the slide plate for taking pictures. The stippled, non-electrostatic surface of the pressure plate ensures an air layer and free slidability of the film for removal and withdrawal of the film sheet. The advantage of the daylight system is that a darkroom need not be used for inserting and removing the film in and out of the cassette resulting in a considerable time saving. (U.K.)

  18. Biomolecular Science (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-04-01

    A brief fact sheet about NREL Photobiology and Biomolecular Science. The research goal of NREL's Biomolecular Science is to enable cost-competitive advanced lignocellulosic biofuels production by understanding the science critical for overcoming biomass recalcitrance and developing new product and product intermediate pathways. NREL's Photobiology focuses on understanding the capture of solar energy in photosynthetic systems and its use in converting carbon dioxide and water directly into hydrogen and advanced biofuels.

  19. Information sheets on energy

    International Nuclear Information System (INIS)

    2004-01-01

    These sheets, presented by the Cea, bring some information, in the energy domain, on the following topics: the world energy demand and the energy policy in France and in Europe, the part of the nuclear power in the energy of the future, the greenhouse gases emissions and the fight against the greenhouse effect, the carbon dioxide storage cost and the hydrogen economy. (A.L.B.)

  20. Dense sheet Z-pinches

    International Nuclear Information System (INIS)

    Tetsu, Miyamoto

    1999-01-01

    The steady state and quasi-steady processes of infinite- and finite-width sheet z-pinches are studied. The relations corresponding to the Bennett relation and Pease-Braginskii current of cylindrical fiber z-pinches depend on a geometrical factor in the sheet z-pinches. The finite-width sheet z-pinch is approximated by a segment of infinite-width sheet z-pinch, if it is wide enough, and corresponds to a number of (width/thickness) times fiber z-pinch plasmas of the diameter that equals the sheet thickness. If the sheet current equals this number times the fiber current, the plasma created in the sheet z-pinches is as dense as in the fiber z-pinches. The total energy of plasma and magnetic field per unit mass is approximately equal in both pinches. Quasi-static transient processes are different in several aspects from the fiber z-pinch. No radiation collapse occurs in the sheet z-pinch. The stability is improved in the sheet z-pinches. The fusion criterions and the experimental arrangements to produce the sheet z-pinches are also discussed. (author)

  1. Pre-LGM Northern Hemisphere ice sheet topography

    Directory of Open Access Journals (Sweden)

    J. Kleman

    2013-10-01

    Full Text Available We here reconstruct the paleotopography of Northern Hemisphere ice sheets during the glacial maxima of marine isotope stages (MIS 5b and 4.We employ a combined approach, blending geologically based reconstruction and numerical modeling, to arrive at probable ice sheet extents and topographies for each of these two time slices. For a physically based 3-D calculation based on geologically derived 2-D constraints, we use the University of Maine Ice Sheet Model (UMISM to calculate ice sheet thickness and topography. The approach and ice sheet modeling strategy is designed to provide robust data sets of sufficient resolution for atmospheric circulation experiments for these previously elusive time periods. Two tunable parameters, a temperature scaling function applied to a spliced Vostok–GRIP record, and spatial adjustment of the climatic pole position, were employed iteratively to achieve a good fit to geological constraints where such were available. The model credibly reproduces the first-order pattern of size and location of geologically indicated ice sheets during marine isotope stages (MIS 5b (86.2 kyr model age and 4 (64 kyr model age. From the interglacial state of two north–south obstacles to atmospheric circulation (Rocky Mountains and Greenland, by MIS 5b the emergence of combined Quebec–central Arctic and Scandinavian–Barents-Kara ice sheets had increased the number of such highland obstacles to four. The number of major ice sheets remained constant through MIS 4, but the merging of the Cordilleran and the proto-Laurentide Ice Sheet produced a single continent-wide North American ice sheet at the LGM.

  2. Experiments on sheet metal shearing

    OpenAIRE

    Gustafsson, Emil

    2013-01-01

    Within the sheet metal industry, different shear cutting technologies are commonly used in several processing steps, e.g. in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material.Numerical models to predict forces and sheared edge geometry for different sheet metal grades and different shear parameter set-ups a...

  3. Ice flow Modelling of the Greenland Ice Sheet

    DEFF Research Database (Denmark)

    Nielsen, Lisbeth Tangaa

    Models of ice flow have a range of application in glaciology, including investigating the large-scale response of ice sheets to changes in climate, assimilating data to estimate unknown conditions beneath the ice sheet, and in interpreting proxy records obtained from ice cores, among others. In t...... a steady state with respect to the reference climate at the end of the simulation and that the mass balance of the ice sheet at this time was more sensitive to recent climate fluctuations than the temperature forcing in the early or mid-Holocene.......Models of ice flow have a range of application in glaciology, including investigating the large-scale response of ice sheets to changes in climate, assimilating data to estimate unknown conditions beneath the ice sheet, and in interpreting proxy records obtained from ice cores, among others....... In this PhD project, the use of ice flow models for the interpretation of the age-structure of the Greenland ice sheet, i.e. the depth within the ice, at which ice deposited at given times are found at present day. Two different observational data sets of this archive were investigated. Further, paleo...

  4. Record Summer Melt in Greenland in 2010

    NARCIS (Netherlands)

    Tedesco, M.; Fettweis, X.; van den Broeke, M.R.; van de Wal, R.S.W.; Smeets, C.J.P.P.; van de Berg, W.J.; Serreze, M.C.; Box, J.E.

    2011-01-01

    As Arctic temperatures increase, there is growing concern about the melting of the Greenland ice sheet, which reached a new record during the summer of 2010. Understanding the changing surface mass balance of the Greenland ice sheet requires appreciation of the close links among changes in surface

  5. Development of a cell sheet transportation technique for regenerative medicine.

    Science.gov (United States)

    Oie, Yoshinori; Nozaki, Takayuki; Takayanagi, Hiroshi; Hara, Susumu; Hayashi, Ryuhei; Takeda, Shizu; Mori, Keisuke; Moriya, Noboru; Soma, Takeshi; Tsujikawa, Motokazu; Saito, Kazuo; Nishida, Kohji

    2014-05-01

    A transportation technique for cell sheets is necessary to standardize regenerative medicine. The aim of this article is to develop and evaluate a new transportation technique for cell sheets. We developed a transportation container with three basic functions: the maintenance of interior temperature, air pressure, and sterility. The interior temperature and air pressure were monitored by a recorder. Human oral mucosal epithelial cells obtained from two healthy volunteers were cultured on temperature-responsive culture dishes. The epithelial cell sheets were transported via an airplane between the Osaka University and Tohoku University using the developed cell transportation container. Histological and immunohistochemical analyses and flow cytometric analyses for cell viability and cell purity were performed for the cell sheets before and 12 h after transportation to assess the influence of transportation on the cell sheets. Sterility tests and screening for endotoxin and mycoplasma in the cell sheets were performed before and after transportation. During transportation via an airplane, the temperature inside the container was maintained above 32°C, and the changes in air pressure remained within 10 hPa. The cell sheets were well stratified and successfully harvested before and after transportation. The expression patterns of keratin 3/76, p63, and MUC16 were equivalent before and after transportation. However, the expression of ZO-1 in the cell sheet after transportation was slightly weaker than that before transportation. The cell viability was 72.0% before transportation and 77.3% after transportation. The epithelial purity was 94.6% before transportation and 87.9% after transportation. Sterility tests and screening for endotoxin and mycoplasma were negative for all cell sheets. The newly developed transportation technique for air travel is essential technology for regenerative medicine and promotes the standardization and spread of regenerative therapies.

  6. Soft Costs Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-05-01

    This fact sheet is an overview of the systems integration subprogram at the U.S. Department of Energy SunShot Initiative. Soft costs can vary significantly as a result of a fragmented energy marketplace. In the U.S., there are 18,000 jurisdictions and 3,000 utilities with different rules and regulations for how to go solar. The same solar equipment may vary widely in its final installation price due to process and market variations across jurisdictions, creating barriers to rapid industry growth. SunShot supports the development of innovative solutions that enable communities to build their local economies and establish clean energy initiatives that meet their needs, while at the same time creating sustainable solar market conditions.

  7. Systems Integration Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    This fact sheet is an overview of the Systems Integration subprogram at the U.S. Department of Energy SunShot Initiative. The Systems Integration subprogram enables the widespread deployment of safe, reliable, and cost-effective solar energy technologies by addressing the associated technical and non-technical challenges. These include timely and cost-effective interconnection procedures, optimal system planning, accurate prediction of solar resources, monitoring and control of solar power, maintaining grid reliability and stability, and many more. To address the challenges associated with interconnecting and integrating hundreds of gigawatts of solar power onto the electricity grid, the Systems Integration program funds research, development, and demonstration projects in four broad, interrelated focus areas: grid performance and reliability, dispatchability, power electronics, and communications.

  8. Photovoltaics Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-01

    This fact sheet is an overview of the Photovoltaics (PV) subprogram at the U.S. Department of Energy SunShot Initiative. The U.S. Department of Energy (DOE)’s Solar Energy Technologies Office works with industry, academia, national laboratories, and other government agencies to advance solar PV, which is the direct conversion of sunlight into electricity by a semiconductor, in support of the goals of the SunShot Initiative. SunShot supports research and development to aggressively advance PV technology by improving efficiency and reliability and lowering manufacturing costs. SunShot’s PV portfolio spans work from early-stage solar cell research through technology commercialization, including work on materials, processes, and device structure and characterization techniques.

  9. Annual Energy Balance Sheets 2001-2002

    International Nuclear Information System (INIS)

    2004-01-01

    During the year 2002 the primary supply of energy reached 629 TWh, which is 7.7 TWh less than 2001. The decrease originates mainly from the reduced electricity production from water power. Also the electricity production in nuclear power plants decreased by 4.5 TWh. If we were to look at the supplied energy for final consumption we will find a slightly rise by 1.8 TWh. The year 2002 was warmer than a 'normal' year and that consequently brings lower energy needs. Compared with 2001, 2002 was not warmer and a net electricity import of 5.4 TWh covered the energy needs. The energy use increased by 3.3 TWh between 2002 and 2001. The industry sector shows the largest rise by 2.9 TWh, nearly 2 per cent. Within that sector, energy from biomass fuel had a rise by 6.7 per cent. The household sector decreases its energy use by 2.7 per cent, and oil and electricity show the largest decrease. The proportionately high electricity price probably had a slowing down effect on the electricity use. The balance sheets of energy sources are showing the total supply and consumption of energy sources expressed in original units, i.e. units recorded in the primary statistics - mainly commercial units. The production of derived energy commodities is recorded on the supply - side of the balance sheets of energy sources, which is not the case in the energy balance sheets. The balance sheets of energy sources also include specifications of input--output and energy consumption in energy conversion industries. The energy balance sheets are based on primary data recorded in the balance sheets of energy sources, here expressed in a common energy unit, TJ. The production of derived energy is recorded in a second flow-step comprising energy turnover in energy conversion and is also specified in complementary input - output tables for energy conversion industries. The following items are shown in the energy balance sheets. 1.1 Inland supply of primary energy; 1.3 Import; 1.4 Export; 1.5 Changes in

  10. Material Safety Data Sheets (MSDS)

    CERN Document Server

    Lalley, J

    About 250.000 Material Safety Data sheets from the U.S. Government Department of Defense MSDS database, a mirror of data from siri.uvm.edu, MSDS sheets maintained by Cornell University Environmental Health and Safety and other Cornell departments.

  11. Plasma dynamics in current sheets

    International Nuclear Information System (INIS)

    Bogdanov, S.Yu.; Drejden, G.V.; Kirij, N.P.; AN SSSR, Leningrad

    1992-01-01

    Plasma dynamics in successive stages of current sheet evolution is investigated on the base of analysis of time-spatial variations of electron density and electrodynamic force fields. Current sheet formation is realized in a two-dimensional magnetic field with zero line under the action of relatively small initial disturbances (linear regimes). It is established that in the limits of the formed sheet is concentrated dense (N e ∼= 10 16 cm -3 ) (T i ≥ 100 eV, bar-Z i ≥ 2) hot pressure of which is balanced by the magnetic action of electrodynamic forces is carried out both plasma compression in the sheet limits and the acceleration along the sheet surface from a middle to narrow side edges

  12. Evolution of the Eurasian Ice Sheets during the Last Deglaciation (25-10 kyr)

    Science.gov (United States)

    Hughes, A. L. C.; Gyllencreutz, R.; Mangerud, J.; Svendsen, J. I.; Lohne, Ø. S.

    2014-12-01

    Both the timing of maximum extent and subsequent pace of retreat of the interconnected Eurasian (British-Irish, Scandinavian, Svalbard-Barents-Kara Sea) Ice Sheets were spatially variable likely reflecting contrasts in response to forcing mechanisms, geographical settings and glacial dynamics both between individual ice sheets and ice-sheet sectors. For example the maximum limit along the western continental shelf edge was reached up to 3,000 years earlier than the maximum, mainly terrestrial, limits in the east. We present new time-slice reconstructions of the ice-sheet evolution through the last deglaciation based on a compiled chronology of over 5,000 dates and published ice-margin positions. Ice-sheet margins are depicted every 1,000 years (25-10 kyr) and include uncertainty estimates (represented by maximum, minimum and most-credible lines). The new ice-sheet scale reconstructions summarise and provide the means for direct comparison of the empirical geological record against simulations of the deglacial ice-sheet evolution from numerical and isostatic ice-sheet modelling and the timing of abrupt events observed in deglacial climate and ocean records. The reconstruction process has identified both instances of conflicting evidence and gaps in the geological record that should be a focus for future studies. This work is part of an on-going project to reconstruct the changing limits of the Eurasian Ice Sheets through the last glacial cycle (www.uib.no/project/dated).

  13. An Ice Sheet Model Validation Framework for the Greenland Ice Sheet

    Science.gov (United States)

    Price, Stephen F.; Hoffman, Matthew J.; Bonin, Jennifer A.; Howat, Ian M.; Neumann, Thomas A.; Saba, Jack; Tezaur, Irina; Guerber, Jeffrey R.; Chambers, Don P.; Evans, Katherine J.; hide

    2017-01-01

    We propose a new ice sheet model validation framework - the Cryospheric Model Comparison Tool (CmCt) - that takes advantage of ice sheet altimetry and gravimetry observations collected over the past several decades and is applied here to modeling of the Greenland ice sheet. We use realistic simulations performed with the Community Ice Sheet Model (CISM) along with two idealized, non-dynamic models to demonstrate the framework and its use. Dynamic simulations with CISM are forced from 1991 to 2013, using combinations of reanalysis-based surface mass balance and observations of outlet glacier flux change. We propose and demonstrate qualitative and quantitative metrics for use in evaluating the different model simulations against the observations. We find that the altimetry observations used here are largely ambiguous in terms of their ability to distinguish one simulation from another. Based on basin-scale and whole-ice-sheet-scale metrics, we find that simulations using both idealized conceptual models and dynamic, numerical models provide an equally reasonable representation of the ice sheet surface (mean elevation differences of less than 1 meter). This is likely due to their short period of record, biases inherent to digital elevation models used for model initial conditions, and biases resulting from firn dynamics, which are not explicitly accounted for in the models or observations. On the other hand, we find that the gravimetry observations used here are able to unambiguously distinguish between simulations of varying complexity, and along with the CmCt, can provide a quantitative score for assessing a particular model and/or simulation. The new framework demonstrates that our proposed metrics can distinguish relatively better from relatively worse simulations and that dynamic ice sheet models, when appropriately initialized and forced with the right boundary conditions, demonstrate a predictive skill with respect to observed dynamic changes that have occurred

  14. Younger Dryas interval and outflow from the Laurentide ice sheet

    Science.gov (United States)

    Moore, T.C.; Walker, J.C.G.; Rea, David K.; Lewis, C.F.M.; Shane, L.C.K.; Smith, A.J.

    2000-01-01

    A boxmodel of the Great Lakes is used to estimate meltwater flow into the North Atlantic between 8000 and 14,000 calendar years B.P. Controls on the model include the oxygen isotopic composition of meltwaters and lake waters as measured in the shells of ostracodes. Outflow rates are highest when oxygen isotopic values of the lake waters are most negative, denoting a maximum glacial meltwater component. Flow rates reach maximum values before the onset of the Younger Dryas and after it ends. These maxima appear to be correlative with the major meltwater pulses MWP 1A and 1B. Although the resumption of North Atlantic Deep Water formation may be tied to the reduction in ice sheet melting, neither the onset nor the end of the Younger Dryas, as recorded in the Greenland Ice Sheet Project (GISP2) records, appear tied to maxima in meltwater outflow from the Laurentide ice sheet. Copyright 2000 by the American Geophysical Union.

  15. Laser altimetry reveals complex pattern of Greenland Ice Sheet dynamics

    NARCIS (Netherlands)

    Csatho, Beata M.; Schenk, Anton F.; van der Veen, Cornelis J.; Babonis, Gregory; Duncan, Kyle; Rezvanbehbahani, Soroush; van den Broeke, Michiel R.|info:eu-repo/dai/nl/073765643; Simonsen, Sebastian B.; Nagarajan, Sudhagar; van Angelen, Jan H.|info:eu-repo/dai/nl/325922470

    2014-01-01

    We present a new record of ice thickness change, reconstructed at nearly 100,000 sites on the Greenland Ice Sheet (GrIS) from laser altimetry measurements spanning the period 1993-2012, partitioned into changes due to surface mass balance (SMB) and ice dynamics. We estimate a mean annual GrIS mass

  16. Development of a vital-sign/fluid-balance flow sheet.

    Science.gov (United States)

    Ozuna, L A; Adkins, A T

    1993-01-01

    An improved flow sheet for recording vital signs and fluid balance on a medical oncology unit was developed and tested using quality-assurance techniques. The new form, which replaced three separate forms, measurably improved documentation on all quality-assurance monitors tested. Additional benefits include cost-savings and decreased time expenditures by nursing staff.

  17. Modelling the Antarctic Ice Sheet

    DEFF Research Database (Denmark)

    Pedersen, Jens Olaf Pepke; Holm, A.

    2015-01-01

    Science) Antarctic Ice Sheet (DAIS) model (Shaffer 2014) is forced by reconstructed time series of Antarctic temperature, global sea level and ocean subsurface temperature over the last two glacial cycles. In this talk a modelling work of the Antarctic ice sheet over most of the Cenozoic era using...... the DAIS model will be presented. G. Shaffer (2014) Formulation, calibration and validation of the DAIS model (version 1), a simple Antarctic ice sheet model sensitive to variations of sea level and ocean subsurface temperature, Geosci. Model Dev., 7, 1803‐1818...

  18. Learning Audio - Sheet Music Correspondences for Score Identification and Offline Alignment

    OpenAIRE

    Dorfer, Matthias; Arzt, Andreas; Widmer, Gerhard

    2017-01-01

    This work addresses the problem of matching short excerpts of audio with their respective counterparts in sheet music images. We show how to employ neural network-based cross-modality embedding spaces for solving the following two sheet music-related tasks: retrieving the correct piece of sheet music from a database when given a music audio as a search query; and aligning an audio recording of a piece with the corresponding images of sheet music. We demonstrate the feasibility of this in expe...

  19. Annual Energy Balance Sheets 2003-2004

    International Nuclear Information System (INIS)

    2005-01-01

    During the year 2004 the supply of primary energy reached 657.6 TWh. That is an increased supply by 16 TWh compared with 2003, The electricity production in hydropower and wind power stations increased by 7 TWh, to 61 TWh during the year 2004. The electricity generated in nuclear power plants was 77.5 TWh, an increase by 10 TWh. During the year 2004 Sweden net exported 2.1 TWh electricity. But in year 2003 we net imported 12.8 TWh electricity. The energy use increased from 406 TWh to 409 TWh between year 2003 and year 2004. The use of coal and coke in manufacturing increased by 22 per cent, and the use of oil products in transport sector increased by 4 per cent. The energy balance sheets are based on data primary recorded in the balance sheets of energy sources, here expressed in a common energy unit, TJ. The production of derived energy is here recorded in a second flow-step comprising energy turnover in energy conversion and is also specified in complementary input-output tables for energy conversion industries

  20. 2007 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  1. 2006 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  2. 2009 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  3. 2008 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  4. 2010 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  5. 2012 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  6. State Fact Sheets on COPD

    Science.gov (United States)

    ... Submit Search The CDC Chronic Obstructive Pulmonary Disease (COPD) Note: Javascript is disabled or is not supported ... message, please visit this page: About CDC.gov . COPD Homepage Data and Statistics Fact Sheets Publications Publications ...

  7. Energy information sheets, July 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

  8. Energy information sheets, September 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

  9. MEaSUREs Greenland Ice Sheet Velocity Map from InSAR Data V002

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set, part of the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) program, contains seasonal (winter) ice-sheet-wide...

  10. MEaSUREs Greenland Ice Sheet Velocity Map from InSAR Data

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set, part of the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) program, provides annual ice-sheet-wide velocity maps...

  11. MEaSUREs Greenland Ice Sheet Velocity Map from InSAR Data V001

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set, part of the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) program, provides annual ice-sheet-wide velocity maps...

  12. MEaSUREs Multi-year Greenland Ice Sheet Velocity Mosaic V001

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set, part of the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) program, contains a multi-year ice-sheet-wide velocity...

  13. Methodologies for analysis of patterning in the mouse RPE sheet

    Science.gov (United States)

    Boatright, Jeffrey H.; Dalal, Nupur; Chrenek, Micah A.; Gardner, Christopher; Ziesel, Alison; Jiang, Yi; Grossniklaus, Hans E.

    2015-01-01

    Purpose Our goal was to optimize procedures for assessing shapes, sizes, and other quantitative metrics of retinal pigment epithelium (RPE) cells and contact- and noncontact-mediated cell-to-cell interactions across a large series of flatmount RPE images. Methods The two principal methodological advances of this study were optimization of a mouse RPE flatmount preparation and refinement of open-access software to rapidly analyze large numbers of flatmount images. Mouse eyes were harvested, and extra-orbital fat and muscles were removed. Eyes were fixed for 10 min, and dissected by puncturing the cornea with a sharp needle or a stab knife. Four radial cuts were made with iridectomy scissors from the puncture to near the optic nerve head. The lens, iris, and the neural retina were removed, leaving the RPE sheet exposed. The dissection and outcomes were monitored and evaluated by video recording. The RPE sheet was imaged under fluorescence confocal microscopy after staining for ZO-1 to identify RPE cell boundaries. Photoshop, Java, Perl, and Matlab scripts, as well as CellProfiler, were used to quantify selected parameters. Data were exported into Excel spreadsheets for further analysis. Results A simplified dissection procedure afforded a consistent source of images that could be processed by computer. The dissection and flatmounting techniques were illustrated in a video recording. Almost all of the sheet could be routinely imaged, and substantial fractions of the RPE sheet (usually 20–50% of the sheet) could be analyzed. Several common technical problems were noted and workarounds developed. The software-based analysis merged 25 to 36 images into one and adjusted settings to record an image suitable for large-scale identification of cell-to-cell boundaries, and then obtained quantitative descriptors of the shape of each cell, its neighbors, and interactions beyond direct cell–cell contact in the sheet. To validate the software, human- and computer

  14. Methodologies for analysis of patterning in the mouse RPE sheet.

    Science.gov (United States)

    Boatright, Jeffrey H; Dalal, Nupur; Chrenek, Micah A; Gardner, Christopher; Ziesel, Alison; Jiang, Yi; Grossniklaus, Hans E; Nickerson, John M

    2015-01-01

    Our goal was to optimize procedures for assessing shapes, sizes, and other quantitative metrics of retinal pigment epithelium (RPE) cells and contact- and noncontact-mediated cell-to-cell interactions across a large series of flatmount RPE images. The two principal methodological advances of this study were optimization of a mouse RPE flatmount preparation and refinement of open-access software to rapidly analyze large numbers of flatmount images. Mouse eyes were harvested, and extra-orbital fat and muscles were removed. Eyes were fixed for 10 min, and dissected by puncturing the cornea with a sharp needle or a stab knife. Four radial cuts were made with iridectomy scissors from the puncture to near the optic nerve head. The lens, iris, and the neural retina were removed, leaving the RPE sheet exposed. The dissection and outcomes were monitored and evaluated by video recording. The RPE sheet was imaged under fluorescence confocal microscopy after staining for ZO-1 to identify RPE cell boundaries. Photoshop, Java, Perl, and Matlab scripts, as well as CellProfiler, were used to quantify selected parameters. Data were exported into Excel spreadsheets for further analysis. A simplified dissection procedure afforded a consistent source of images that could be processed by computer. The dissection and flatmounting techniques were illustrated in a video recording. Almost all of the sheet could be routinely imaged, and substantial fractions of the RPE sheet (usually 20-50% of the sheet) could be analyzed. Several common technical problems were noted and workarounds developed. The software-based analysis merged 25 to 36 images into one and adjusted settings to record an image suitable for large-scale identification of cell-to-cell boundaries, and then obtained quantitative descriptors of the shape of each cell, its neighbors, and interactions beyond direct cell-cell contact in the sheet. To validate the software, human- and computer-analyzed results were compared. Whether

  15. The environmental record in glaciers and ice sheets

    International Nuclear Information System (INIS)

    Oeschger, H.; Langway, C.C. Jr.

    1989-01-01

    This book conveys from different points of view a sense of the variables involved in the formation and movement of glacial ice and the kinds of information held in the various glaciers. It also covers methodology and presents examples of recent findings and unexplored pathways. Verifying ice core chronology is a major challenge. Radioactive constituents such as 14 C, 10 Be, and 81 Kr produced in the atmosphere by cosmic radiation can be useful for dating within the ranges of their respective half-lives. Abrupt changes in carbon dioxide concentration during an approximately 10,000-year period at a depth of about 2 kilometers in ice from the Dye 3 core (southern Greenland) and their evident correlation with changes in 18 O values arouse great curiosity. Other abrupt (on a geologic time scale) changes in such parameters bear witness to large changes in climate in periods of a century or less. The presence of pollen testifies to the large body of unexploited information in these cores. Dating of pollen deposits, identification of species, and correlation of the resulting data with varve information on continental and ocean sediments should give new insight into climate change, species adaptation, forest migration, and back trajectories of air masses

  16. Automobile sheet metal part production with incremental sheet forming

    Directory of Open Access Journals (Sweden)

    İsmail DURGUN

    2016-02-01

    Full Text Available Nowadays, effect of global warming is increasing drastically so it leads to increased interest on energy efficiency and sustainable production methods. As a result of adverse conditions, national and international project platforms, OEMs (Original Equipment Manufacturers, SMEs (Small and Mid-size Manufacturers perform many studies or improve existing methodologies in scope of advanced manufacturing techniques. In this study, advanced manufacturing and sustainable production method "Incremental Sheet Metal Forming (ISF" was used for sheet metal forming process. A vehicle fender was manufactured with or without die by using different toolpath strategies and die sets. At the end of the study, Results have been investigated under the influence of method and parameters used.Keywords: Template incremental sheet metal, Metal forming

  17. Horizontal electromagnetic casting of thin metal sheets

    Science.gov (United States)

    Hull, John R.; Lari, Robert J.; Praeg, Walter F.; Turner, Larry R.

    1987-01-01

    Thin metal sheets are cast by magnetically suspending molten metal deposited within a ferromagnetic yoke and between AC conducting coils and linearly displacing the magnetically levitated liquid metal while it is being cooled to form a solid metal sheet. Magnetic flux increases as the molten metal sheet moves downward and decreases as the molten metal sheet moves upward to stabilize the sheet and maintain it in equilibrium as it is linearly displaced and solidified by cooling gases. A conducting shield is electrically coupled to the molten metal sheet by means of either metal sheet engaging rollers or brushes on the solidified metal, and by means of an electrode in the vessel containing the molten metal thereby providing a return path for the eddy currents induced in the metal sheet by the AC coil generated magnetic flux. Variation in the geometry of the conducting shield allows the magnetic flux between the metal sheet and the conducting shield to be varied and the thickness in surface quality of the metal sheet to be controlled. Side guards provide lateral containment for the molten metal sheet and stabilize and shape the magnetic field while a leader sheet having electromagnetic characteristics similar to those of the metal sheet is used to start the casting process and precedes the molten metal sheet through the magnet and forms a continuous sheet therewith. The magnet may be either U-shaped with a single racetrack coil or may be rectangular with a pair of facing bedstead coils.

  18. Horizontal electromagnetic casting of thin metal sheets

    Energy Technology Data Exchange (ETDEWEB)

    Hull, John R. (Hinsdale, IL); Lari, Robert J. (Aurora, IL); Praeg, Walter F. (Palos Park, IL); Turner, Larry R. (Naperville, IL)

    1988-01-01

    Thin metal sheets are cast by magnetically suspending molten metal deposited within a ferromagnetic yoke and between AC conducting coils and linearly displacing the magnetically levitated liquid metal while it is being cooled to form a solid metal sheet. Magnetic flux increases as the molten metal sheet moves downward and decreases as the molten metal sheet moves upward to stabilize the sheet and maintain it in equilibrium as it is linearly displaced and solidified by cooling gases. A conducting shield is electrically coupled to the molten metal sheet by means of either metal sheet engaging rollers or brushes on the solidified metal, and by means of an electrode in the vessel containing the molten metal thereby providing a return path for the eddy currents induced in the metal sheet by the AC coil generated magnetic flux. Variation in the geometry of the conducting shield allows the magnetic flux between the metal sheet and the conducting shield to be varied and the thickness in surface quality of the metal sheet to be controlled. Side guards provide lateral containment for the molten metal sheet and stabilize and shape the magnetic field while a leader sheet having electromagnetic characteristics similar to those of the metal sheet is used to start the casting process and precedes the molten metal sheet through the magnet and forms a continuous sheet therewith. The magnet may be either U-shaped with a single racetrack coil or may be rectangular with a pair of facing bedstead coils.

  19. Deciphering the evolution of the last Eurasian ice sheets

    Science.gov (United States)

    Hughes, Anna; Gyllencreutz, Richard; Mangerud, Jan; Svendsen, John Inge

    2016-04-01

    Glacial geologists need ice sheet-scale chronological reconstructions of former ice extent to set individual records in a wider context and compare interpretations of ice sheet response to records of past environmental changes. Ice sheet modellers require empirical reconstructions on size and volume of past ice sheets that are fully documented, specified in time and include uncertainty estimates for model validation or constraints. Motivated by these demands, in 2005 we started a project (Database of the Eurasian Deglaciation, DATED) to compile and archive all published dates relevant to constraining the build-up and retreat of the last Eurasian ice sheets, including the British-Irish, Scandinavian and Svalbard-Barents-Kara Seas ice sheets (BIIS, SIS and SBKIS respectively). Over 5000 dates were assessed for reliability and used together with published ice-sheet margin positions to reconstruct time-slice maps of the ice sheets' extent, with uncertainty bounds, every 1000 years between 25-10 kyr ago and at four additional periods back to 40 kyr ago. Ten years after the idea for a database was conceived, the first version of results (DATED-1) has now been released (Hughes et al. 2016). We observe that: i) both the BIIS and SBKIS achieve maximum extent, and commence retreat earlier than the larger SIS; ii) the eastern terrestrial margin of the SIS reached its maximum extent up to 7000 years later than the westernmost marine margin; iii) the combined maximum ice volume (~24 m sea-level equivalent) was reached c. 21 ka; iv) large uncertainties exist; predominantly across marine sectors (e.g. the timing of coalescence and separation of the SIS and BKIS) but also in well-studied areas due to conflicting yet equally robust data. In just three years since the DATED-1 census (1 January 2013), the volume of new information (from both dates and mapped glacial geomorphology) has grown significantly (~1000 new dates). Here, we present the DATED-1 results in the context of the

  20. Uranium mining sites - Thematic sheets

    International Nuclear Information System (INIS)

    2009-01-01

    A first sheet proposes comments, data and key numbers about uranium extraction in France: general overview of uranium mining sites, status of waste rock and tailings after exploitation, site rehabilitation. The second sheet addresses the sources of exposure to ionizing radiations due to ancient uranium mining sites: discussion on the identification of these sources associated with these sites, properly due to mining activities or to tailings, or due to the transfer of radioactive substances towards water and to the contamination of sediments, description of the practice and assessment of radiological control of mining sites. A third sheet addresses the radiological exposure of public to waste rocks, and the dose assessment according to exposure scenarios: main exposure ways to be considered, studied exposure scenarios (passage on backfilled path and grounds, stay in buildings built on waste rocks, keeping mineralogical samples at home). The fourth sheet addresses research programmes of the IRSN on uranium and radon: epidemiological studies (performed on mine workers; on French and on European cohorts, French and European studies on the risk of lung cancer associated with radon in housing), study of the biological effects of chronic exposures. The last sheet addresses studies and expertises performed by the IRSN on ancient uranium mining sites in France: studies commissioned by public authorities, radioactivity control studies performed by the IRSN about mining sites, participation of the IRSN to actions to promote openness to civil society

  1. Records Management

    Science.gov (United States)

    Ray, Charles M.

    1977-01-01

    This discussion of evaluating a records management course includes comments on management orientation, creation of records, maintenance of records, selection and use of equipment, storage and destruction of records, micrographics, and a course outline. (TA)

  2. Non-dissipative shapable sheet

    Science.gov (United States)

    Oppenheimer, Naomi; Witten, Thomas

    2014-03-01

    A sheet of paper that has been crumpled and flattened retains some amount of shapability that a bare, uncrumpled, sheet does not have: when deformed by external forces, it retains the deformed shape after the forces are removed. Using a frustrated two dimensional lattice of springs, we show that such shapability can be attained in a non-dissipative system. Numerical investigations suggest an extensive number of bistable energy minima using several variants of this scheme. The numerical sheet can be bent into a nearly-closed cylinder that holds its shape. We verify that the deformed shape is locally stable and compare its bending modulus in the deformed state with that in the initial flat state. We investigate the threshold for non-elastic deformation using various kinds of forcing.

  3. Root-growth-inhibiting sheet

    Science.gov (United States)

    Burton, Frederick G.; Cataldo, Dominic A.; Cline, John F.; Skiens, W. Eugene; Van Voris, Peter

    1993-01-01

    In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a "geotextile" and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.

  4. Sheet Bending using Soft Tools

    Science.gov (United States)

    Sinke, J.

    2011-05-01

    Sheet bending is usually performed by air bending and V-die bending processes. Both processes apply rigid tools. These solid tools facilitate the generation of software for the numerical control of those processes. When the lower rigid die is replaced with a soft or rubber tool, the numerical control becomes much more difficult, since the soft tool deforms too. Compared to other bending processes the rubber backed bending process has some distinct advantages, like large radius-to-thickness ratios, applicability to materials with topcoats, well defined radii, and the feasibility of forming details (ridges, beads). These advantages may give the process exclusive benefits over conventional bending processes, not only for industries related to mechanical engineering and sheet metal forming, but also for other disciplines like Architecture and Industrial Design The largest disadvantage is that also the soft (rubber) tool deforms. Although the tool deformation is elastic and recovers after each process cycle, the applied force during bending is related to the deformation of the metal sheet and the deformation of the rubber. The deformation of the rubber interacts with the process but also with sheet parameters. This makes the numerical control of the process much more complicated. This paper presents a model for the bending of sheet materials using a rubber lower die. This model can be implemented in software in order to control the bending process numerically. The model itself is based on numerical and experimental research. In this research a number of variables related to the tooling and the material have been evaluated. The numerical part of the research was used to investigate the influence of the features of the soft lower tool, like the hardness and dimensions, and the influence of the sheet thickness, which also interacts with the soft tool deformation. The experimental research was focused on the relation between the machine control parameters and the most

  5. Ice sheet hydrology - a review

    International Nuclear Information System (INIS)

    Jansson, Peter; Naeslund, Jens-Ove; Rodhe, Lars

    2007-03-01

    This report summarizes the theoretical knowledge on water flow in and beneath glaciers and ice sheets and how these theories are applied in models to simulate the hydrology of ice sheets. The purpose is to present the state of knowledge and, perhaps more importantly, identify the gaps in our understanding of ice sheet hydrology. Many general concepts in hydrology and hydraulics are applicable to water flow in glaciers. However, the unique situation of having the liquid phase flowing in conduits of the solid phase of the same material, water, is not a commonly occurring phenomena. This situation means that the heat exchange between the phases and the resulting phase changes also have to be accounted for in the analysis. The fact that the solidus in the pressure-temperature dependent phase diagram of water has a negative slope provides further complications. Ice can thus melt or freeze from both temperature and pressure variations or variations in both. In order to provide details of the current understanding of water flow in conjunction with deforming ice and to provide understanding for the development of ideas and models, emphasis has been put on the mathematical treatments, which are reproduced in detail. Qualitative results corroborating theory or, perhaps more often, questioning the simplifications made in theory, are also given. The overarching problem with our knowledge of glacier hydrology is the gap between the local theories of processes and the general flow of water in glaciers and ice sheets. Water is often channelized in non-stationary conduits through the ice, features which due to their minute size relative to the size of glaciers and ice sheets are difficult to incorporate in spatially larger models. Since the dynamic response of ice sheets to global warming is becoming a key issue in, e.g. sea-level change studies, the problems of the coupling between the hydrology of an ice sheet and its dynamics is steadily gaining interest. New work is emerging

  6. Ice sheet hydrology - a review

    Energy Technology Data Exchange (ETDEWEB)

    Jansson, Peter; Naeslund, Jens-Ove [Dept. of Physical Geography and Quaternary Geology, Stockholm Univ., Stockholm (Sweden); Rodhe, Lars [Geological Survey of Sweden, Uppsala (Sweden)

    2007-03-15

    This report summarizes the theoretical knowledge on water flow in and beneath glaciers and ice sheets and how these theories are applied in models to simulate the hydrology of ice sheets. The purpose is to present the state of knowledge and, perhaps more importantly, identify the gaps in our understanding of ice sheet hydrology. Many general concepts in hydrology and hydraulics are applicable to water flow in glaciers. However, the unique situation of having the liquid phase flowing in conduits of the solid phase of the same material, water, is not a commonly occurring phenomena. This situation means that the heat exchange between the phases and the resulting phase changes also have to be accounted for in the analysis. The fact that the solidus in the pressure-temperature dependent phase diagram of water has a negative slope provides further complications. Ice can thus melt or freeze from both temperature and pressure variations or variations in both. In order to provide details of the current understanding of water flow in conjunction with deforming ice and to provide understanding for the development of ideas and models, emphasis has been put on the mathematical treatments, which are reproduced in detail. Qualitative results corroborating theory or, perhaps more often, questioning the simplifications made in theory, are also given. The overarching problem with our knowledge of glacier hydrology is the gap between the local theories of processes and the general flow of water in glaciers and ice sheets. Water is often channelized in non-stationary conduits through the ice, features which due to their minute size relative to the size of glaciers and ice sheets are difficult to incorporate in spatially larger models. Since the dynamic response of ice sheets to global warming is becoming a key issue in, e.g. sea-level change studies, the problems of the coupling between the hydrology of an ice sheet and its dynamics is steadily gaining interest. New work is emerging

  7. Sheet Beam Klystron Instability Analysis

    International Nuclear Information System (INIS)

    Bane, K.

    2009-01-01

    Using the principle of energy balance we develop a 2D theory for calculating growth rates of instability in a two-cavity model of a sheet beam klystron. An important ingredient is a TE-like mode in the gap that also gives a longitudinal kick to the beam. When compared with a self-consistent particle-in-cell calculation, with sheet beam klystron-type parameters, agreement is quite good up to half the design current, 65 A; at full current, however, other, current-dependent effects come in and the results deviate significantly

  8. Hydrogeological map of Kabo Sheet 80NW topographical sheet 1 ...

    African Journals Online (AJOL)

    A hydro geological mapping of the Federal Surveys of Nigeria, Kabo Sheet 80 NW, on scale 1:50,000 were made with areal coverage of 729Km2 on the Crystalline Basement Complex, and the hydrogeoogical maps produced are maps of depth to the water table and maps of configuration peak of dry season and wet ...

  9. Development of Farm Records Software

    Directory of Open Access Journals (Sweden)

    M. S. Abubakar

    2017-12-01

    Full Text Available Farm records are mostly manually kept on paper notebooks and folders where similar records are organized in one folder or spread sheet. These records are usually kept for many years therefore they becomes bulky and less organized. Consequently, it becomes difficult to search, update and tedious and time consuming to manage these records. This study was carried-out to overcome these problems associated with manual farm records keeping by developing user-friendly, easily accessible, reliable and secured software. The software was limited records keeping in crop production, livestock production, poultry production, employees, income and expenditure. The system was implemented using Java Server Faces (JSF for designing Graphical User Interface (GUI, Enterprises Java Beans (EJB for logic tier and MySQL database for storing farm records.

  10. Higher Education Act. Fact Sheet.

    Science.gov (United States)

    National Council on Disability, 2004

    2004-01-01

    This fact sheet highlights the challenges for students with disabilities in the nation's university system and recommends solutions that would result in better support systems for postsecondary students with disabilities. This document discusses several interrelated issues that impact student preparation and access to postsecondary education. The…

  11. Fact Sheet: Vulnerable Young Children

    Science.gov (United States)

    Shaw, Evelyn, Comp.; Goode, Sue, Comp.

    2008-01-01

    This fact sheet provides data on infants, toddlers and young children who are experiencing high stress as a result of a number of risk factors specifically identified in the Individuals with Disabilities Education Improvement Act of 2004 (IDEA 2004), including substantiated abuse or neglect, foster care placement, homelessness, exposure to family…

  12. Off-Balance Sheet Financing.

    Science.gov (United States)

    Adams, Matthew C.

    1998-01-01

    Examines off-balance sheet financing, the facilities use of outsourcing for selected needs, as a means of saving operational costs and using facility assets efficiently. Examples of using outside sources for energy supply and food services, as well as partnering with business for facility expansion are provided. Concluding comments address tax…

  13. Learning from Balance Sheet Visualization

    Science.gov (United States)

    Tanlamai, Uthai; Soongswang, Oranuj

    2011-01-01

    This exploratory study examines alternative visuals and their effect on the level of learning of balance sheet users. Executive and regular classes of graduate students majoring in information technology in business were asked to evaluate the extent of acceptance and enhanced capability of these alternative visuals toward their learning…

  14. Stabilization of Inviscid Vortex Sheets

    Science.gov (United States)

    Protas, Bartosz; Sakajo, Takashi

    2017-11-01

    In this study we investigate the problem of stabilizing inviscid vortex sheets via feedback control. Such models, expressed in terms of the Birkhoff-Rott equation, are often used to describe the Kevin-Helmholtz instability of shear layers and are known to be strongly unstable to small-scale perturbations. First, we consider the linear stability of a straight vortex sheet in the periodic setting with actuation in the form of an array of point vortices or sources located a certain distance away from the sheet. We establish conditions under which this system is controllable and observable. Next, using methods of the linear control theory, we synthesize a feedback control strategy which stabilizes a straight vortex sheet in the linear regime. Given the poor conditioning of the discretized problem, reliable solution of the resulting algebraic Riccati equation requires the use of high-precision arithmetic. Finally, we demonstrate that this control approach also succeeds in the nonlinear regime, provided the magnitude of the initial perturbation is sufficiently small.

  15. Magnetic Resonance Facility (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-03-01

    This fact sheet provides information about Magnetic Resonance Facility capabilities and applications at NREL's National Bioenergy Center. Liquid and solid-state analysis capability for a variety of biomass, photovoltaic, and materials characterization applications across NREL. NREL scientists analyze solid and liquid samples on three nuclear magnetic resonance (NMR) spectrometers as well as an electron paramagnetic resonance (EPR) spectrometer.

  16. Modelling repeated competition records in genetic evaluations of Danish sport horses

    DEFF Research Database (Denmark)

    Jönsson, Lina Johanna Maria; Madsen, P.; Mark, Thomas

    2016-01-01

    experience, judge and competing horses, but also demands more computer capacity than single-trait records, which could prohibit multiple-trait evaluations. The aim of the study was to compare CPU times, estimated breeding values (EBVs), reliabilities and model prediction abilities when modelling repeated...... competition ranking points (run A), mean ranking points (runs B and C), mean ranking points precorrected for effects associated with each competition (run D) and accumulated lifetime points (run E) for Danish Warmblood horses. CPU times for run A were 632–776 times (show jumping) and 59–96 times (dressage...

  17. Strategic surfaces in sheet metal forming

    DEFF Research Database (Denmark)

    Olsson, David Dam; Andreasen, Jan Lasson; Bay, Niels

    Out-line: Introduction to tribology in sheet metal forming Developed strategic surfaces Tribological testing of strategic surfaces Conclusion......Out-line: Introduction to tribology in sheet metal forming Developed strategic surfaces Tribological testing of strategic surfaces Conclusion...

  18. Whooping Cough (Pertussis) - Fact Sheet for Parents

    Science.gov (United States)

    ... months 4 through 6 years Fact Sheet for Parents Color [2 pages] Español: Tosferina (pertussis) The best ... according to the recommended schedule. Fact Sheets for Parents Diseases and the Vaccines that Prevent Them Chickenpox ...

  19. Distant plasma sheet ion distributions during reconnection

    OpenAIRE

    Owen, C. J.; Mist, R. T.

    2001-01-01

    Previous models of the plasma sheet following reconnection and current sheet acceleration predict 'lima-bean' ion distributions. These are inconsistent with observational constraints. We postulate that following initial interaction with the current sheet, a fraction of outflow ions are backscattered and re-encounter the current sheet. Fermi acceleration processes then generate an additional high-energy outflow population. In the backscatter region these ions form a complete shell in velocity ...

  20. Records Management

    Data.gov (United States)

    U.S. Environmental Protection Agency — All Federal Agencies are required to prescribe an appropriate records maintenance program so that complete records are filed or otherwise preserved, records can be...

  1. Radiostratigraphy and age structure of the Greenland Ice Sheet.

    Science.gov (United States)

    MacGregor, Joseph A; Fahnestock, Mark A; Catania, Ginny A; Paden, John D; Prasad Gogineni, S; Young, S Keith; Rybarski, Susan C; Mabrey, Alexandria N; Wagman, Benjamin M; Morlighem, Mathieu

    2015-02-01

    Several decades of ice-penetrating radar surveys of the Greenland and Antarctic ice sheets have observed numerous widespread internal reflections. Analysis of this radiostratigraphy has produced valuable insights into ice sheet dynamics and motivates additional mapping of these reflections. Here we present a comprehensive deep radiostratigraphy of the Greenland Ice Sheet from airborne deep ice-penetrating radar data collected over Greenland by The University of Kansas between 1993 and 2013. To map this radiostratigraphy efficiently, we developed new techniques for predicting reflection slope from the phase recorded by coherent radars. When integrated along track, these slope fields predict the radiostratigraphy and simplify semiautomatic reflection tracing. Core-intersecting reflections were dated using synchronized depth-age relationships for six deep ice cores. Additional reflections were dated by matching reflections between transects and by extending reflection-inferred depth-age relationships using the local effective vertical strain rate. The oldest reflections, dating to the Eemian period, are found mostly in the northern part of the ice sheet. Within the onset regions of several fast-flowing outlet glaciers and ice streams, reflections typically do not conform to the bed topography. Disrupted radiostratigraphy is also observed in a region north of the Northeast Greenland Ice Stream that is not presently flowing rapidly. Dated reflections are used to generate a gridded age volume for most of the ice sheet and also to determine the depths of key climate transitions that were not observed directly. This radiostratigraphy provides a new constraint on the dynamics and history of the Greenland Ice Sheet. Phase information predicts reflection slope and simplifies reflection tracingReflections can be dated away from ice cores using a simple ice flow modelRadiostratigraphy is often disrupted near the onset of fast ice flow.

  2. 21 CFR 880.5180 - Burn sheet.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Burn sheet. 880.5180 Section 880.5180 Food and... Burn sheet. (a) Identification. A burn sheet is a device made of a porous material that is wrapped aroung a burn victim to retain body heat, to absorb wound exudate, and to serve as a barrier against...

  3. Simulation of stationary sheet metal cutting processes

    NARCIS (Netherlands)

    Wisselink, H.H.; Huetink, Han

    1998-01-01

    In stationary sheet metal cutting processes, like guillotining and slitting, the sheet is cut progressively from one end to the other. This in contrary with transient processes (blanking) where the sheet is cut at once. Where transient shearing processes can be modelled in 2-D (plain strain or

  4. 7 CFR 1.5 - Requests for records.

    Science.gov (United States)

    2010-01-01

    ... APPEAL” in capital letters on the front of the envelope or on the cover sheet of the fax transmittal. (e... requester should place the phrase “FOIA REQUEST” in capital letters on the front of the envelope or on the cover sheet of the facsimile transmittal. (b) A request must reasonably describe the records to enable...

  5. Geometry of thin liquid sheet flows

    Science.gov (United States)

    Chubb, Donald L.; Calfo, Frederick D.; Mcconley, Marc W.; Mcmaster, Matthew S.; Afjeh, Abdollah A.

    1994-01-01

    Incompresible, thin sheet flows have been of research interest for many years. Those studies were mainly concerned with the stability of the flow in a surrounding gas. Squire was the first to carry out a linear, invicid stability analysis of sheet flow in air and compare the results with experiment. Dombrowski and Fraser did an experimental study of the disintegration of sheet flows using several viscous liquids. They also detected the formulation of holes in their sheet flows. Hagerty and Shea carried out an inviscid stability analysis and calculated growth rates with experimental values. They compared their calculated growth rates with experimental values. Taylor studied extensively the stability of thin liquid sheets both theoretically and experimentally. He showed that thin sheets in a vacuum are stable. Brown experimentally investigated thin liquid sheet flows as a method of application of thin films. Clark and Dumbrowski carried out second-order stability analysis for invicid sheet flows. Lin introduced viscosity into the linear stability analysis of thin sheet flows in a vacuum. Mansour and Chigier conducted an experimental study of the breakup of a sheet flow surrounded by high-speed air. Lin et al. did a linear stability analysis that included viscosity and a surrounding gas. Rangel and Sirignano carried out both a linear and nonlinear invisid stability analysis that applies for any density ratio between the sheet liquid and the surrounding gas. Now there is renewed interest in sheet flows because of their possible application as low mass radiating surfaces. The objective of this study is to investigate the fluid dynamics of sheet flows that are of interest for a space radiator system. Analytical expressions that govern the sheet geometry are compared with experimental results. Since a space radiator will operate in a vacuum, the analysis does not include any drag force on the sheet flow.

  6. Biogeochemical cycling in a subarctic fjord adjacent to the Greenland Ice Sheet

    NARCIS (Netherlands)

    Meire, L.

    2016-01-01

    Temperatures in the Arctic have increased rapidly in recent years resulting in the melting of sea ice and glaciers at unprecedented rates. In 2012, sea ice extent across the Arctic reached a record minimum and the melt extent of Greenland Ice Sheet reached a record maximum. The accelerated mass loss

  7. Ice sheet hydrology from observations

    Energy Technology Data Exchange (ETDEWEB)

    Jansson, Peter (Dept. of Physical Geography and Quaternary Geology, Stockholm Univ-, Stockholm (Sweden))

    2010-11-15

    The hydrological systems of ice sheets are complex. Our view of the system is split, largely due to the complexity of observing the systems. Our basic knowledge of processes have been obtained from smaller glaciers and although applicable in general to the larger scales of the ice sheets, ice sheets contain features not observable on smaller glaciers due to their size. The generation of water on the ice sheet surface is well understood and can be satisfactorily modeled. The routing of water from the surface down through the ice is not complicated in terms of procat has been problematic is the way in which the couplings between surface and bed has been accomplished through a kilometer of cold ice, but with the studies on crack propagation and lake drainage on Greenland we are beginning to understand also this process and we know water can be routed through thick cold ice. Water generation at the bed is also well understood but the main problem preventing realistic estimates of water generation is lack of detailed information about geothermal heat fluxes and their geographical distribution beneath the ice. Although some average value for geothermal heat flux may suffice, for many purposes it is important that such values are not applied to sub-regions of significantly higher fluxes. Water generated by geothermal heat constitutes a constant supply and will likely maintain a steady system beneath the ice sheet. Such a system may include subglacial lakes as steady features and reconfiguration of the system is tied to time scales on which the ice sheet geometry changes so as to change pressure gradients in the basal system itself. Large scale re-organization of subglacial drainage systems have been observed beneath ice streams. The stability of an entirely subglacially fed drainage system may hence be perturbed by rapid ice flow. In the case of Antarctic ice streams where such behavior has been observed, the ice streams are underlain by deformable sediments. It is

  8. Ohm's law for a current sheet

    Science.gov (United States)

    Lyons, L. R.; Speiser, T. W.

    1985-01-01

    The paper derives an Ohm's law for single-particle motion in a current sheet, where the magnetic field reverses in direction across the sheet. The result is considerably different from the resistive Ohm's law often used in MHD studies of the geomagnetic tail. Single-particle analysis is extended to obtain a self-consistency relation for a current sheet which agrees with previous results. The results are applicable to the concept of reconnection in that the electric field parallel to the current is obtained for a one-dimensional current sheet with constant normal magnetic field. Dissipated energy goes directly into accelerating particles within the current sheet.

  9. Dynamic Antarctic ice sheet during the early to mid-Miocene

    Science.gov (United States)

    Gasson, Edward; DeConto, Robert M.; Pollard, David; Levy, Richard H.

    2016-03-01

    Geological data indicate that there were major variations in Antarctic ice sheet volume and extent during the early to mid-Miocene. Simulating such large-scale changes is problematic because of a strong hysteresis effect, which results in stability once the ice sheets have reached continental size. A relatively narrow range of atmospheric CO2 concentrations indicated by proxy records exacerbates this problem. Here, we are able to simulate large-scale variability of the early to mid-Miocene Antarctic ice sheet because of three developments in our modeling approach. (i) We use a climate-ice sheet coupling method utilizing a high-resolution atmospheric component to account for ice sheet-climate feedbacks. (ii) The ice sheet model includes recently proposed mechanisms for retreat into deep subglacial basins caused by ice-cliff failure and ice-shelf hydrofracture. (iii) We account for changes in the oxygen isotopic composition of the ice sheet by using isotope-enabled climate and ice sheet models. We compare our modeling results with ice-proximal records emerging from a sedimentological drill core from the Ross Sea (Andrill-2A) that is presented in a companion article. The variability in Antarctic ice volume that we simulate is equivalent to a seawater oxygen isotope signal of 0.52-0.66‰, or a sea level equivalent change of 30-36 m, for a range of atmospheric CO2 between 280 and 500 ppm and a changing astronomical configuration. This result represents a substantial advance in resolving the long-standing model data conflict of Miocene Antarctic ice sheet and sea level variability.

  10. Using the glacial geomorphology of palaeo-ice streams to understand mechanisms of ice sheet collapse

    Science.gov (United States)

    Stokes, Chris R.; Margold, Martin; Clark, Chris; Tarasov, Lev

    2017-04-01

    Processes which bring about ice sheet deglaciation are critical to our understanding of glacial-interglacial cycles and ice sheet sensitivity to climate change. The precise mechanisms of deglaciation are also relevant to our understanding of modern-day ice sheet stability and concerns over global sea level rise. Mass loss from ice sheets can be broadly partitioned between melting and a 'dynamic' component whereby rapidly-flowing ice streams/outlet glaciers transfer ice from the interior to the oceans. Surface and basal melting (e.g. of ice shelves) are closely linked to atmospheric and oceanic conditions, but the mechanisms that drive dynamic changes in ice stream discharge are more complex, which generates much larger uncertainties about their future contribution to ice sheet mass loss and sea level rise. A major problem is that observations of modern-day ice streams typically span just a few decades and, at the ice-sheet scale, it is unclear how the entire drainage network of ice streams evolves during deglaciation. A key question is whether ice streams might increase and sustain rates of mass loss over centuries or millennia, beyond those expected for a given ocean-climate forcing. To address this issue, numerous workers have sought to understand ice stream dynamics over longer time-scales using their glacial geomorphology in the palaeo-record. Indeed, our understanding of their geomorphology has grown rapidly in the last three decades, from almost complete ignorance to a detailed knowledge of their geomorphological products. Building on this body of work, this paper uses the glacial geomorphology of 117 ice streams in the North American Laurentide Ice Sheet to reconstruct their activity during its deglaciation ( 22,000 to 7,000 years ago). Ice stream activity was characterised by high variability in both time and space, with ice streams switching on and off in different locations. During deglaciation, we find that their overall number decreased, they occupied a

  11. 21 CFR 58.195 - Retention of records.

    Science.gov (United States)

    2010-04-01

    ... schedule sheet, copies of protocols, and records of quality assurance inspections, as required by § 58.35(c) shall be maintained by the quality assurance unit as an easily accessible system of records for the... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Retention of records. 58.195 Section 58.195 Food...

  12. BARLEY BALANCE SHEET IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Dragoş Mihai MEDELETE

    2013-01-01

    Full Text Available Barley is one of the most important cereal grown in Romania, after corn and wheat. This is based, at least on considerations of cultivated area (413.4 thousand ha - average 2007-2009, but also because of the multiple uses it may have (Food, feed, industrial raw materials, etc.. Presentation of food balance we consider interesting in terms of supply and demand components: production, imports, stocks, exports, seeds, feed consumption, industrial raw materials, food and other useslosses. On the basis of total volume of supply and demand we could determine the balance sheet at nationa level for the product.

  13. Vietnamese Hurricane Response Fact Sheets

    Science.gov (United States)

    Các tờ dữ kiện được cung cấp nơi đây mô tả vai trò của EPA trong việc đáp ứng với bão và cách các chương trình cụ thể cung cấp sự hỗ trợ. The Vietnamese fact sheets provided here describe EPA's role in a hurricane response.

  14. Laser welding of sheet metals

    Science.gov (United States)

    Xie, Jian

    Laser welding of sheet metals is an important application of high power lasers, and has many advantages over conventional welding techniques. Laser welding has a great potential to replace other welding technique in the car-body manufacturing because of high laser weld quality and relatively low manufacturing cost associated with the laser technique. However, a few problems related to the laser welding of sheet metals limit its applications in industries. To have a better understanding of the welding process, laser welding experimental studies and theoretical analysis are necessary. Temperature-dependent absorptivities of various metals are obtained theoretically for COsb2, COIL (Chemical Oxygen-Iodine Laser) and Nd:YAG lasers. It is found that the absorptivities for COIL and Nd:YAG lasers are 2.84 and 3.16 times higher than for the COsb2 laser, and the absorptivity increases with increasing temperature of the metals. Surface roughness and oxide films can enhance the absorption significantly. The reflectivity of as-received steel sheets decreases from 65-80% to 30-40% with surface oxide films for COsb2 lasers. Laser welding experiments show that the tensile strengths of the weld metals are higher than the base metals. For samples with surface oxide films, the oxygen concentration in the weld metals is found to be higher than in the specimens without oxidation, and the toughness of the weld metals is degraded. When steel powders are added to bridge the gap between two sheets, the oxygen content in the weld metals decreases and the toughness increases. A mathematical model is developed for the melt depth due to a stationary laser beam. The model results show that the melt depth increases rapidly with time at the beginning of laser irradiation and then increases slowly. Also, the melt depth is found to increase rapidly with laser intensities and then increases slowly for higher intensity. The average rate of melting and the times to reach the melting and boiling

  15. Reconstructing the temperature regime of the Weichselian ice sheet

    International Nuclear Information System (INIS)

    Holmlund, P.

    1997-01-01

    Areas in Sweden are described, where the ice could have been at the pressure melting point during the last ice age. In order to calculate probable degrees of glacial erosion, estimates on the time of ice coverage and the temperature distribution in time are combined data on erosion rates from present day glaciers. An estimate of the extent of ice cover can be made using the proxy temperature record from the Greenland ice cores and a model of the ice sheet. Adding the estimations on climate and ice sheet shape outlined in this contribution, to erosion figures we may conclude that the crucial areas for glaciation erosion are within the mountains and where the present Baltic and the Gulf of Bothnia are situated. At these sites erosion rates of some tens of meters may have occurred. In inland northern Sweden and inland southern Sweden the potential for glacial erosion seems to be small. 14 refs

  16. Reconstructing the temperature regime of the Weichselian ice sheet

    Energy Technology Data Exchange (ETDEWEB)

    Holmlund, P. [Stockholm Univ. (Sweden). Dept. of Physical Geography

    1997-04-01

    Areas in Sweden are described, where the ice could have been at the pressure melting point during the last ice age. In order to calculate probable degrees of glacial erosion, estimates on the time of ice coverage and the temperature distribution in time are combined data on erosion rates from present day glaciers. An estimate of the extent of ice cover can be made using the proxy temperature record from the Greenland ice cores and a model of the ice sheet. Adding the estimations on climate and ice sheet shape outlined in this contribution, to erosion figures we may conclude that the crucial areas for glaciation erosion are within the mountains and where the present Baltic and the Gulf of Bothnia are situated. At these sites erosion rates of some tens of meters may have occurred. In inland northern Sweden and inland southern Sweden the potential for glacial erosion seems to be small. 14 refs.

  17. AI applications in sheet metal forming

    CERN Document Server

    Hussein, Hussein

    2017-01-01

    This book comprises chapters on research work done around the globe in the area of artificial intelligence (AI) applications in sheet metal forming. The first chapter offers an introduction to various AI techniques and sheet metal forming, while subsequent chapters describe traditional procedures/methods used in various sheet metal forming processes, and focus on the automation of those processes by means of AI techniques, such as KBS, ANN, GA, CBR, etc. Feature recognition and the manufacturability assessment of sheet metal parts, process planning, strip-layout design, selecting the type and size of die components, die modeling, and predicting die life are some of the most important aspects of sheet metal work. Traditionally, these activities are highly experience-based, tedious and time consuming. In response, researchers in several countries have applied various AI techniques to automate these activities, which are covered in this book. This book will be useful for engineers working in sheet metal industri...

  18. Obliquity-paced Pliocene West Antarctic ice sheet oscillations

    Science.gov (United States)

    Naish, T.; Powell, R.; Levy, R.; Wilson, G.; Scherer, R.; Talarico, F.; Krissek, L.; Niessen, F.; Pompilio, M.; Wilson, T.; Carter, L.; DeConto, R.; Huybers, P.; McKay, R.; Pollard, D.; Ross, J.; Winter, D.; Barrett, P.; Browne, G.; Cody, R.; Cowan, E.; Crampton, J.; Dunbar, G.; Dunbar, N.; Florindo, F.; Gebhardt, C.; Graham, I.; Hannah, M.; Hansaraj, D.; Harwood, D.; Helling, D.; Henrys, S.; Hinnov, L.; Kuhn, G.; Kyle, P.; Laufer, A.; Maffioli, P.; Magens, D.; Mandernack, K.; McIntosh, W.; Millan, C.; Morin, R.; Ohneiser, C.; Paulsen, T.; Persico, D.; Raine, I.; Reed, J.; Riesselman, C.; Sagnotti, L.; Schmitt, D.; Sjunneskog, C.; Strong, P.; Taviani, M.; Vogel, S.; Wilch, T.; Williams, T.

    2009-01-01

    Thirty years after oxygen isotope records from microfossils deposited in ocean sediments confirmed the hypothesis that variations in the Earth's orbital geometry control the ice ages1, fundamental questions remain over the response of the Antarctic ice sheets to orbital cycles2. Furthermore, an understanding of the behaviour of the marine-based West Antarctic ice sheet (WAIS) during the 'warmer-than-present' early-Pliocene epoch (5–3 Myr ago) is needed to better constrain the possible range of ice-sheet behaviour in the context of future global warming3. Here we present a marine glacial record from the upper 600 m of the AND-1B sediment core recovered from beneath the northwest part of the Ross ice shelf by the ANDRILL programme and demonstrate well-dated, 40-kyr cyclic variations in ice-sheet extent linked to cycles in insolation influenced by changes in the Earth's axial tilt (obliquity) during the Pliocene. Our data provide direct evidence for orbitally induced oscillations in the WAIS, which periodically collapsed, resulting in a switch from grounded ice, or ice shelves, to open waters in the Ross embayment when planetary temperatures were up to 3 °C warmer than today4 and atmospheric CO2 concentration was as high as 400 p.p.m.v. (refs 5, 6). The evidence is consistent with a new ice-sheet/ice-shelf model7 that simulates fluctuations in Antarctic ice volume of up to +7 m in equivalent sea level associated with the loss of the WAIS and up to +3 m in equivalent sea level from the East Antarctic ice sheet, in response to ocean-induced melting paced by obliquity. During interglacial times, diatomaceous sediments indicate high surface-water productivity, minimal summer sea ice and air temperatures above freezing, suggesting an additional influence of surface melt8 under conditions of elevated CO2.

  19. Steel Sheet Pile Walls in Soft Soil

    OpenAIRE

    Kort, D.A.

    2002-01-01

    For almost a century, steel sheet pile walls are applied worldwide as earth retaining structures for excavations and quay walls. Within the framework of the development of European structural codes for Civil Engineering works, the Eurocodes, Eurocode 3 Part 5 for design of steel sheet pile walls was issued in 1997. This code offers possibilities for cheaper and safer steel sheet piling, in comparison with the existing design criteria used in most countries. Two of these design criteria with w...

  20. Hydraulic structures with defective sheet pile walls

    OpenAIRE

    Ahmed, Ashraf A.; Johnston, Harold T.; Oyedele, Lukumon

    2013-01-01

    A sheet pile wall driven to form a barrier wall below the floor of a hydraulic structure is frequently assumed to be watertight. Although the leakage through the interlocks of the sheet piles is usually small, damage and other factors can result in significant leakage. Consequently, this assumption is rarely, if ever, satisfied in reality. The present study used a finite-element model to investigate the effect of leaks through sheet piles driven under the floor of a hydraulic structure on see...

  1. Application of atelocollagen sheet for sellar reconstruction.

    Science.gov (United States)

    Goto, Yuko; Oshino, Satoru; Shimizu, Takeshi; Saitoh, Youichi

    2016-05-01

    We aimed to evaluate combined use of atelocollagen sheet and fibrin glue for sellar reconstruction. Experiment 1: A plastic chamber was prepared with a hydroxyapatite lid with a hole of 10mm in diameter at its center, covered with a Gore-Tex sheet (W.L. Gore & Associates, Tokyo, Japan) 15mm in diameter and sealed with a combination of fibrin glue sealant and either atelocollagen sheet or polyglycolic acid (PGA) sheet. Air was injected into the chamber and the pressure at which air leakage occurred was measured under each situation. Mean (±standard deviation) leakage pressure was 816±162mmH2O for atelocollagen sheet (n=5), significantly higher than the 557±130mmH2O for PGA sheet (n=5, p<0.05, Wilcoxon test). Experiment 2: Bilateral 5mm bone windows were made in the temporal bone in eight rats. The surgical cavities were filled with one of four materials (fibrin glue only; fibrin glue and atelocollagen sheet; PGA sheet; or autologous fat tissue). Histological changes including the status of implanted materials and inflammatory responses were investigated 2 and 5weeks after the procedures. Both atelocollagen and PGA sheets remained at 5weeks after implantation, whereas fibrin glue and fat tissue were absorbed and undetectable at 2weeks. Inflammatory cell accumulation was less around the atelocollagen sheet compared to the PGA sheet. The combination of atelocollagen sheet and fibrin glue sealant showed sufficient adhesion force and favorable tissue affinity, suggesting this combination as a feasible material in sellar reconstruction. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Gadolinium sheet converter for neutron radiography

    Energy Technology Data Exchange (ETDEWEB)

    Lima, C.T.S. [Laboratorio de Neutrongrafia em Tempo Real (LNRTR/PEN/COPPE), Universidade Federal do Rio de Janeiro, Ilha do Fundao, Caixa Postal 68509, 21941-972 Rio de Janeiro, RJ (Brazil); Crispim, V.R. [Laboratorio de Neutrongrafia em Tempo Real (LNRTR/PEN/COPPE), Universidade Federal do Rio de Janeiro, Ilha do Fundao, Caixa Postal 68509, 21941-972 Rio de Janeiro, RJ (Brazil); PEN/COPPE-DNC/Escola Politecnica CT, Universidade Federal do Rio de Janeiro, Ilha do Fundao, Caixa Postal 68509, 21941-972 Rio de Janeiro, RJ (Brazil)], E-mail: verginia@con.ufrj.br; Santos, W.M.S. [Laboratorio de Colisao Atomica e Molecular (LACAM/IF), Universidade Federal do Rio de Janeiro, Ilha do Fundao, Caixa Postal 68528, 21941-972 Rio de Janeiro, RJ (Brazil)

    2007-12-15

    This work describes a methodology developed for the confection of gadolinium sheet converter for neutron radiography using the gadolinium chloride (GdCl{sub 3}) as material converter. Though manufactured at a relatively low cost, they are as good as the sheet converter on the market. Here, we present neutron radiography of the penetrameter, the edge spread function, the modulation transfer function and characteristic curves for each set sheet-AA400 Kodak film.

  3. Mars's magnetotail: Nature's current sheet laboratory

    Science.gov (United States)

    Artemyev, A. V.; Angelopoulos, V.; Halekas, J. S.; Runov, A.; Zelenyi, L. M.; McFadden, J. P.

    2017-05-01

    The configuration and stability of an important kinetic plasma structure, the current sheet, determine the efficiency of magnetic energy storage, release, and transport in surrounding plasmas. These properties depend on β (the ratio of plasma pressures to magnetic field pressures) and Mach number M (the ratio of bulk velocities to magnetosonic velocities). For the most investigated current sheet, the near-Earth magnetotail current sheet, these parameters fall within a relatively narrow range of values (high β, low M). To investigate current sheet behavior for a wider range of parameters, we explore current sheets in the magnetotail of Mars using Mars Atmosphere and Volatile Evolution (MAVEN) mission observations. We find that low-β, high-M current sheets are abundant in Mars's magnetotail, but high-β, low-M current sheets can also be found there. Low-β current sheets are nearly force-free, whereas high-M current sheets are balanced by a plasma flow gradient along the tail. We compare current sheet distributions in a (β,M) space for the Martian magnetotail, the near-Earth magnetotail (using Time History of Events and Macroscale Interactions during Substorms (THEMIS) mission), and the distant magnetotail (using Acceleration, Reconnection, Turbulence, and Electrodynamics of the Moon's Interaction with the Sun (ARTEMIS) mission). We also find that the pressure balance in the Martian magnetotail current sheet can occur by contributions from a wide range of ion species, or, in low beta cases, from field-aligned currents generation of a force-free magnetic field configuration. The Martian magnetotail is a natural laboratory where current sheet of various types can be found and investigated.

  4. Shape Optimization of Swimming Sheets

    Energy Technology Data Exchange (ETDEWEB)

    Wilkening, J.; Hosoi, A.E.

    2005-03-01

    The swimming behavior of a flexible sheet which moves by propagating deformation waves along its body was first studied by G. I. Taylor in 1951. In addition to being of theoretical interest, this problem serves as a useful model of the locomotion of gastropods and various micro-organisms. Although the mechanics of swimming via wave propagation has been studied extensively, relatively little work has been done to define or describe optimal swimming by this mechanism.We carry out this objective for a sheet that is separated from a rigid substrate by a thin film of viscous Newtonian fluid. Using a lubrication approximation to model the dynamics, we derive the relevant Euler-Lagrange equations to optimize swimming speed and efficiency. The optimization equations are solved numerically using two different schemes: a limited memory BFGS method that uses cubic splines to represent the wave profile, and a multi-shooting Runge-Kutta approach that uses the Levenberg-Marquardt method to vary the parameters of the equations until the constraints are satisfied. The former approach is less efficient but generalizes nicely to the non-lubrication setting. For each optimization problem we obtain a one parameter family of solutions that becomes singular in a self-similar fashion as the parameter approaches a critical value. We explore the validity of the lubrication approximation near this singular limit by monitoring higher order corrections to the zeroth order theory and by comparing the results with finite element solutions of the full Stokes equations.

  5. Magnetic properties of sheet silicates

    International Nuclear Information System (INIS)

    Ballet, O.; Coey, J.M.D.

    1982-01-01

    Susceptibility, magnetisation and Moessbauer measurements are reported for a representative selection of 2:1 layer phyllosilicates. Eight samples from the mica, vermiculite and smectite groups include examples diluted in iron which are paramagnetic at all temperatures, as well as iron-rich silicates which order magnetically below 10 K. Anisotropic susceptibility of crystals of muscovite, biotite and vermiculite is quantitatively explained with a model where the Fe 2+ ions lie in sites of effective trigonal symmetry, the trigonal axis lying normal to the sheets. The ferrous ground state is an orbital singlet. Ferric iron gives an isotropic contribution to the susceptibility. Fe 2+ -Fe 2+ exchange interactions are ferromagnetic with Gapprox. equal to2 K, whereas Fe 3+ -Fe 3+ coupling is antiferromagnetic in the purely ferric minerals. A positive paramagnetic Curie temperature for glauconite may be attributable to Fe 2+ → Fe 3+ charge transfer. Magnetic order was found to set in inhomogeneously for glauconite at 1-7 K. One biotite sample showed an antiferromagnetic transition at Tsub(N) = 7 K marked by a well-defined susceptibility maximum. Its magnetic structure, consisting of ferromagnetic sheets with moments in their planes coupled antiferromagnetically by other, weak interactions, resembles that found earlier for the 1:1 mineral greenalite. (orig.)

  6. Light Sheet Fluorescence Microscopy (LSFM).

    Science.gov (United States)

    Adams, Michael W; Loftus, Andrew F; Dunn, Sarah E; Joens, Matthew S; Fitzpatrick, James A J

    2015-01-05

    The development of confocal microscopy techniques introduced the ability to optically section fluorescent samples in the axial dimension, perpendicular to the image plane. These approaches, via the placement of a pinhole in the conjugate image plane, provided superior resolution in the axial (z) dimension resulting in nearly isotropic optical sections. However, increased axial resolution, via pinhole optics, comes at the cost of both speed and excitation efficiency. Light sheet fluorescent microscopy (LSFM), a century-old idea made possible with modern developments in both excitation and detection optics, provides sub-cellular resolution and optical sectioning capabilities without compromising speed or excitation efficiency. Over the past decade, several variations of LSFM have been implemented each with its own benefits and deficiencies. Here we discuss LSFM fundamentals and outline the basic principles of several major light-sheet-based imaging modalities (SPIM, inverted SPIM, multi-view SPIM, Bessel beam SPIM, and stimulated emission depletion SPIM) while considering their biological relevance in terms of intrusiveness, temporal resolution, and sample requirements. Copyright © 2015 John Wiley & Sons, Inc.

  7. Monitoring southwest Greenland’s ice sheet melt with ambient seismic noise

    Science.gov (United States)

    Mordret, Aurélien; Mikesell, T. Dylan; Harig, Christopher; Lipovsky, Bradley P.; Prieto, Germán A.

    2016-01-01

    The Greenland ice sheet presently accounts for ~70% of global ice sheet mass loss. Because this mass loss is associated with sea-level rise at a rate of 0.7 mm/year, the development of improved monitoring techniques to observe ongoing changes in ice sheet mass balance is of paramount concern. Spaceborne mass balance techniques are commonly used; however, they are inadequate for many purposes because of their low spatial and/or temporal resolution. We demonstrate that small variations in seismic wave speed in Earth’s crust, as measured with the correlation of seismic noise, may be used to infer seasonal ice sheet mass balance. Seasonal loading and unloading of glacial mass induces strain in the crust, and these strains then result in seismic velocity changes due to poroelastic processes. Our method provides a new and independent way of monitoring (in near real time) ice sheet mass balance, yielding new constraints on ice sheet evolution and its contribution to global sea-level changes. An increased number of seismic stations in the vicinity of ice sheets will enhance our ability to create detailed space-time records of ice mass variations. PMID:27386524

  8. Thermal rupture of a free liquid sheet

    Science.gov (United States)

    Kitavtsev, G.; Fontelos, M. A.; Eggers, J.

    2018-04-01

    We consider a free liquid sheet, taking into account the dependence of surface tension on temperature, or concentration of some pollutant. The sheet dynamics are described within a long-wavelength description. In the presence of viscosity, local thinning of the sheet is driven by a strong temperature gradient across the pinch region, resembling a shock. As a result, for long times the sheet thins exponentially, leading to breakup. We describe the quasi one-dimensional thickness, velocity, and temperature profiles in the pinch region in terms of similarity solutions, which posses a universal structure. Our analytical description agrees quantitatively with numerical simulations.

  9. Capturing total chronological and spatial uncertainties in palaeo-ice sheet reconstructions: the DATED example

    Science.gov (United States)

    Hughes, Anna; Gyllencreutz, Richard; Mangerud, Jan; Svendsen, John Inge

    2017-04-01

    Glacial geologists generate empirical reconstructions of former ice-sheet dynamics by combining evidence from the preserved record of glacial landforms (e.g. end moraines, lineations) and sediments with chronological evidence (mainly numerical dates derived predominantly from radiocarbon, exposure and luminescence techniques). However the geomorphological and sedimentological footprints and chronological data are both incomplete records in both space and time, and all have multiple types of uncertainty associated with them. To understand ice sheets' response to climate we need numerical models of ice-sheet dynamics based on physical principles. To test and/or constrain such models, empirical reconstructions of past ice sheets that capture and acknowledge all uncertainties are required. In 2005 we started a project (Database of the Eurasian Deglaciation, DATED) to produce an empirical reconstruction of the evolution of the last Eurasian ice sheets, (including the British-Irish, Scandinavian and Svalbard-Barents-Kara Seas ice sheets) that is fully documented, specified in time, and includes uncertainty estimates. Over 5000 dates relevant to constraining ice build-up and retreat were assessed for reliability and used together with published ice-sheet margin positions based on glacial geomorphology to reconstruct time-slice maps of the ice sheets' extent. The DATED maps show synchronous ice margins with maximum-minimum uncertainty bounds for every 1000 years between 25-10 kyr ago. In the first version of results (DATED-1; Hughes et al. 2016) all uncertainties (both quantitative and qualitative, e.g. precision and accuracy of numerical dates, correlation of moraines, stratigraphic interpretations) were combined based on our best glaciological-geological assessment and expressed in terms of distance as a 'fuzzy' margin. Large uncertainties (>100 km) exist; predominantly across marine sectors and other locations where there are spatial gaps in the dating record (e.g. the

  10. [Improved care of foot ulcer using foot pressure measurement and foot care method sheet].

    Science.gov (United States)

    Tinen, Takaaki; Iha, Hiroyuki; Miyagi, Chiaki; Yusa, Masaru; Taira, Hitomi; Matsumoto, Kinuko

    2008-09-01

    At this sanatorium, the number of foot bottom ulcer patients was 13 and the tenure of the foot bottom ulcer was average 11 years. According to the treatment that was not unified, we thought about the cause of the prolongation. Therefore, we made evaluation and care method sheet ("foot care sheet") of the ulcer for the unification. We used the foot pressure measurement system (F-scan) to 4 patients for the pressure dispersion of the ulcer. We devised the protection law of the ulcer, and an ulcer did not require pressure more than 5 kilos/cm2. We recorded the size of the ulcer, weight of the liquid from ulcer, a photograph to care sheet once a week. I performed ulcer protection law and management with the foot care sheet to 4 patients for average 4 months. As a result, the ulcers of 3 patients out of 4 patients became small.

  11. Numerical modelling of unsteady 2D sheet cavitation

    NARCIS (Netherlands)

    de Lange, D.F.; de Bruin, G.J.; van Wijngaarden, L.; van Wijngaarden, L.

    1996-01-01

    Unsteady 2D sheet cavitation has been calculated by a BEM. Cubics are used to represent various quantities like the potential on the wet part of the profile, the normal velocity on the sheet, the geometry of the profile and the sheet. The growing cavity sheet, the re-entrant jet and the sheet

  12. Surface Mass Balance of the Greenland Ice Sheet Derived from Paleoclimate Reanalysis

    Science.gov (United States)

    Badgeley, J.; Steig, E. J.; Hakim, G. J.; Anderson, J.; Tardif, R.

    2017-12-01

    Modeling past ice-sheet behavior requires independent knowledge of past surface mass balance. Though models provide useful insight into ice-sheet response to climate forcing, if past climate is unknown, then ascertaining the rate and extent of past ice-sheet change is limited to geological and geophysical constraints. We use a novel data-assimilation framework developed under the Last Millennium Reanalysis Project (Hakim et al., 2016) to reconstruct past climate over ice sheets with the intent of creating an independent surface mass balance record for paleo ice-sheet modeling. Paleoclimate data assimilation combines the physics of climate models and the time series evidence of proxy records in an offline, ensemble-based approach. This framework allows for the assimilation of numerous proxy records and archive types while maintaining spatial consistency with known climate dynamics and physics captured by the models. In our reconstruction, we use the Community Climate System Model version 4, CMIP5 last millennium simulation (Taylor et al., 2012; Landrum et al., 2013) and a nearly complete database of ice core oxygen isotope records to reconstruct Holocene surface temperature and precipitation over the Greenland Ice Sheet on a decadal timescale. By applying a seasonality to this reconstruction (from the TraCE-21ka simulation; Liu et al., 2009), our reanalysis can be used in seasonally-based surface mass balance models. Here we discuss the methods behind our reanalysis and the performance of our reconstruction through prediction of unassimilated proxy records and comparison to paleoclimate reconstructions and reanalysis products.

  13. TOMATOES BALANCE SHEET IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Dragoş Mihai MEDELETE

    2013-01-01

    Full Text Available Tomatoes are one of the most representative vegetable species cultivated in our country. This allegation is based on the essential elements of tomatoes culture respectively area cultivated, total production and average yield per hectare - indicators for 2007-2009 reached average levels of 48.8 thousand hectares and 736.9 thousand tonnes respectively 15101kg / ha. Presentation of food helps establish balance of the demand and supply component parts total as follows: production, imports, exports (on request food consumption and losses (on request. It is worth noting that in Romania, unlike global and continental do not appear reports for stocks, industrial raw materials, feed consumption, and other uses. Based on the total volume of supply and demand it could be determining the national balance sheet for the product.

  14. Fact Sheets on Pesticides in Schools.

    Science.gov (United States)

    National Coalition against the Misuse of Pesticides, Washington, DC.

    This document consists of a collection of fact sheets about the use of pesticides in schools and how to reduce it. The sheets are: (1) "Alternatives to Using Pesticides in Schools: What Is Integrated Pest Management?"; (2) "Health Effects of 48 Commonly Used Pesticides in Schools"; (3) "The Schooling of State Pesticide…

  15. Advanced friction modeling in sheet metal forming

    NARCIS (Netherlands)

    Hol, J.; Cid Alfaro, M.V.; Meinders, Vincent T.; Huetink, Han

    2011-01-01

    The Coulomb friction model is frequently used for sheet metal forming simulations. This model incorporates a constant coefficient of friction and does not take the influence of important parameters such as contact pressure or deformation of the sheet material into account. This article presents a

  16. Steel Sheet Pile Walls in Soft Soil

    NARCIS (Netherlands)

    Kort, D.A.

    2002-01-01

    For almost a century, steel sheet pile walls are applied worldwide as earth retaining structures for excavations and quay walls. Within the framework of the development of European structural codes for Civil Engineering works, the Eurocodes, Eurocode 3 Part 5 for design of steel sheet pile walls was

  17. Clouds enhance Greenland ice sheet meltwater runoff

    NARCIS (Netherlands)

    Van Tricht, K.; Lhermitte, S.; Lenaerts, J. T M; Gorodetskaya, I. V.; L'Ecuyer, T. S.; Noël, B.; Van Den Broeke, M. R.; Turner, D. D.; Van Lipzig, N. P M

    2016-01-01

    The Greenland ice sheet has become one of the main contributors to global sea level rise, predominantly through increased meltwater runoff. The main drivers of Greenland ice sheet runoff, however, remain poorly understood. Here we show that clouds enhance meltwater runoff by about one-third relative

  18. Balance velocities of the Greenland ice sheet

    DEFF Research Database (Denmark)

    Joughin, I.; Fahnestock, M.; Ekholm, Simon

    1997-01-01

    We present a map of balance velocities for the Greenland ice sheet. The resolution of the underlying DEM, which was derived primarily from radar altimetery data, yields far greater detail than earlier balance velocity estimates for Greenland. The velocity contours reveal in striking detail......, the balance map is useful for ice-sheet modelling, mass balance studies, and field planning....

  19. Antibubbles and fine cylindrical sheets of air

    NARCIS (Netherlands)

    Beilharz, D.; Guyon, A.; Li, E.Q.; Thoraval, Marie-Jean; Thoroddsen, S.T.

    2015-01-01

    Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a

  20. Ranking beta sheet topologies of proteins

    DEFF Research Database (Denmark)

    Fonseca, Rasmus; Helles, Glennie; Winter, Pawel

    2010-01-01

    One of the challenges of protein structure prediction is to identify long-range interactions between amino acids. To reliably predict such interactions, we enumerate, score and rank all beta-topologies (partitions of beta-strands into sheets, orderings of strands within sheets and orientations of...

  1. SPICE: Sentinel-3 Performance Improvement for Ice Sheets

    Science.gov (United States)

    McMillan, M.; Escola, R.; Roca, M.; Thibaut, P.; Aublanc, J.; Shepherd, A.; Remy, F.; Benveniste, J.; Ambrózio, A.; Restano, M.

    2017-12-01

    For the past 25 years, polar-orbiting satellite radar altimeters have provided a valuable record of ice sheet elevation change and mass balance. One of the principle challenges associated with radar altimetry comes from the relatively large ground footprint of conventional pulse-limited radars, which reduces their capacity to make measurements in areas of complex topographic terrain. In recent years, progress has been made towards improving ground resolution, through the implementation of Synthetic Aperture Radar (SAR), or Delay-Doppler, techniques. In 2010, the launch of CryoSat-2 heralded the start of a new era of SAR Interferometric (SARIn) altimetry. However, because the satellite operated in SARIn and LRM mode over the ice sheets, many of the non-interferometric SAR altimeter processing techniques have been optimized for water and sea ice surfaces only. The launch of Sentinel-3, which provides full non-interferometric SAR coverage of the ice sheets, therefore presents the opportunity to further develop these SAR processing methodologies over ice sheets. Here we present results from SPICE, a 2 year study that focuses on (1) developing and evaluating Sentinel-3 SAR altimetry processing methodologies over the Polar ice sheets, and (2) investigating radar wave penetration through comparisons of Ku- and Ka-band satellite measurements. The project, which is funded by ESA's SEOM (Scientific Exploitation of Operational Missions) programme, has worked in advance of the operational phase of Sentinel-3, to emulate Sentinel-3 SAR and pseudo-LRM data from dedicated CryoSat-2 SAR acquisitions made at the Lake Vostok, Dome C and Spirit sites in East Antarctica, and from reprocessed SARIn data in Greenland. In Phase 1 of the project we have evaluated existing processing methodologies, and in Phase 2 we are investigating new evolutions to the Delay-Doppler Processing (DDP) and retracking chains. In this presentation we (1) evaluate the existing Sentinel-3 processing chain by

  2. Multi-decadal dynamic thinning on the northwest margin of the Greenland Ice Sheet

    DEFF Research Database (Denmark)

    Korsgaard, Niels Jákup; Kjær, Kurt H.; Khan, Shfaqat Abbas

    Ice mass changes in the Greenland Ice Sheet have been estimated since the early 1990s from the GRACE (Gravity Recovery and Climate Experiment) satellite gravity mission, of ice sheet thinning from satellite radar altimetry and airborne laser altimetry, and of increased velocities of outlet glaciers...... of increasing dynamic induced ice loss. GRACE data show that this increased mass loss initiated in 2005 ceased in late 2009, thus, defining a dynamic thinning event as seen previous along the coast in southeast Greenland. Here, we present a multi-decadal perspective on ice mass change from northwestern...... records with a 25 m grid resolution and vertical uncertainty of 4.6m. Comparative DEMs were derived from laser altimetry data recorded in 2005 and 2010. Ice loss from the Greenland Ice Sheet (GrIS) can be partitioned into surface mass balance (SMB) processes (runoff and precipitation) and ice dynamics...

  3. Improving Surface Mass Balance Over Ice Sheets and Snow Depth on Sea Ice

    Science.gov (United States)

    Koenig, Lora Suzanne; Box, Jason; Kurtz, Nathan

    2013-01-01

    Surface mass balance (SMB) over ice sheets and snow on sea ice (SOSI) are important components of the cryosphere. Large knowledge gaps remain in scientists' abilities to monitor SMB and SOSI, including insufficient measurements and difficulties with satellite retrievals. On ice sheets, snow accumulation is the sole mass gain to SMB, and meltwater runoff can be the dominant single loss factor in extremely warm years such as 2012. SOSI affects the growth and melt cycle of the Earth's polar sea ice cover. The summer of 2012 saw the largest satellite-recorded melt area over the Greenland ice sheet and the smallest satellite-recorded Arctic sea ice extent, making this meeting both timely and relevant.

  4. Folded Sheet Versus Transparent Sheet Models for Human Symmetry Judgments

    Directory of Open Access Journals (Sweden)

    Jacques Ninio

    2011-07-01

    Full Text Available As a contribution to the mysteries of human symmetry perception, reaction time data were collected on the detection of symmetry or repetition violations, in the context of short term visual memory studies. The histograms for reaction time distributions are rather narrow in the case of symmetry judgments. Their analysis was performed in terms of a simple kinetic model of a mental process in two steps, a slow one for the construction of the representation of the images to be compared, and a fast one, in the 50 ms range, for the decision. There was no need for an additional ‘mental rotation’ step. Symmetry seems to facilitate the construction step. I also present here original stimuli showing a color equalization effect across a symmetry axis, and its counterpart in periodic patterns. According to a “folded sheet model”, when a shape is perceived, the brain automatically constructs a mirror-image representation of the shape. Based in part on the reaction time analysis, I present here an alternative “transparent sheet” model in which the brain constructs a single representation, which can be accessed from two sides, thus generating simultaneously a pattern and its mirror-symmetric partner. Filtering processes, implied by current models of symmetry perception could intervene at an early stage, by nucleating the propagation of similar perceptual groupings in the two symmetric images.

  5. Phenological Records

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Phenology is the scientific study of periodic biological phenomena, such as flowering, breeding, and migration, in relation to climatic conditions. The few records...

  6. Ice sheet margins and ice shelves

    Science.gov (United States)

    Thomas, R. H.

    1984-01-01

    The effect of climate warming on the size of ice sheet margins in polar regions is considered. Particular attention is given to the possibility of a rapid response to warming on the order of tens to hundreds of years. It is found that the early response of the polar regions to climate warming would be an increase in the area of summer melt on the ice sheets and ice shelves. For sufficiently large warming (5-10C) the delayed effects would include the breakup of the ice shelves by an increase in ice drainage rates, particularly from the ice sheets. On the basis of published data for periodic changes in the thickness and melting rates of the marine ice sheets and fjord glaciers in Greenland and Antarctica, it is shown that the rate of retreat (or advance) of an ice sheet is primarily determined by: bedrock topography; the basal conditions of the grounded ice sheet; and the ice shelf condition downstream of the grounding line. A program of satellite and ground measurements to monitor the state of ice sheet equilibrium is recommended.

  7. Millennial-scale instability of the Antarctic Ice Sheet during the last glaciation.

    NARCIS (Netherlands)

    Kanfoush, S.L.; Hodell, D.A.; Charles, C.D.; Guilderson, T.P.; Mortyn, P.G.

    2000-01-01

    Records of ice-rafted detritus (IRD) concentration in deep-sea cores from the southeast Atlantic Ocean reveal millennial-scale pulses of IRD delivery between 20,000 and 74,000 years ago. Prominent IRD layers correlate across the Polar Frontal Zone, suggesting episodes of Antarctic Ice Sheet

  8. Improving Climate Literacy Using The Ice Sheet System Model (ISSM): A Prototype Virtual Ice Sheet Laboratory For Use In K-12 Classrooms

    Science.gov (United States)

    Halkides, D. J.; Larour, E. Y.; Perez, G.; Petrie, K.; Nguyen, L.

    2013-12-01

    Statistics indicate that most Americans learn what they will know about science within the confines of our public K-12 education system and the media. Next Generation Science Standards (NGSS) aim to remedy science illiteracy and provide guidelines to exceed the Common Core State Standards that most U.S. state governments have adopted, by integrating disciplinary cores with crosscutting ideas and real life practices. In this vein, we present a prototype ';Virtual Ice Sheet Laboratory' (I-Lab), geared to K-12 students, educators and interested members of the general public. I-Lab will allow users to perform experiments using a state-of-the-art dynamical ice sheet model and provide detailed downloadable lesson plans, which incorporate this model and are consistent with NGSS Physical Science criteria for different grade bands (K-2, 3-5, 6-8, and 9-12). The ultimate goal of this website is to improve public climate science literacy, especially in regards to the crucial role of the polar ice sheets in Earth's climate and sea level. The model used will be the Ice Sheet System Model (ISSM), an ice flow model developed at NASA's Jet Propulsion Laboratory and UC Irvine, that simulates the near-term evolution of polar ice sheets (Greenland and Antarctica) and includes high spatial resolution capabilities and data assimilation to produce realistic simulations of ice sheet dynamics at the continental scale. Open sourced since 2011, ISSM is used in cutting edge cryosphere research around the globe. Thru I-Lab, students will be able to access ISSM using a simple, online graphical interface that can be launched from a web browser on a computer, tablet or smart phone. The interface will allow users to select different climate conditions and watch how the polar ice sheets evolve in time under those conditions. Lesson contents will include links to background material and activities that teach observation recording, concept articulation, hypothesis formulation and testing, and

  9. Intermontane eolian sand sheet development, Upper Tulum Valley, central-western Argentina

    Directory of Open Access Journals (Sweden)

    Patrick Francisco Fuhr Dal' Bó

    Full Text Available ABSTRACTThe intermontane Upper Tulum eolian sand sheet covers an area of ca. 125 km² at north of the San Juan Province, central-western Argentina. The sand sheet is currently an aggrading system where vegetation cover, surface cementation and periodic flooding withhold the development of dunes with slipfaces. The sand sheet surface is divided into three parts according to the distribution of sedimentary features, which reflects the variation in sediment budget, water table level and periodic flooding. The central sand sheet part is the main area of eolian deposition and is largely stabilized by vegetation. The sedimentary succession is 4 m thick and records the vertical interbedding of eolian and subaqueous deposits, which have been deposited for at least 3.6 ky with sedimentation rates of 86.1 cm/ky. The construction of the sand sheet is associated with deflation of the sand-graded debris sourced by San Juan alluvial fan, which is available mainly in drier fall-winter months where water table is lower and wind speeds are periodically above the threshold velocity for sand transport. The accumulation of sedimentary bodies occurs in a stabilized eolian system where vegetation cover, thin mud veneers and surface cementation are the main agents in promoting accumulation. The preservation of the sand sheet accumulations is enabled by the progressive creation of the accommodation space in a tectonically active basin and the continuous burial of geological bodies favored by high rates of sedimentation.

  10. Integer conductance quantization of gold atomic sheets

    Science.gov (United States)

    Kurui, Yoshihiko; Oshima, Yoshifumi; Okamoto, Masakuni; Takayanagi, Kunio

    2008-04-01

    Using a transmission electron microscope combined with a scanning tunneling microscope, we find that a gold (111) or (001) atomic sheet is formed between two gold electrodes. Simultaneous conductance measurements indicate a value in the vicinity of G0 ( =2e2/h : conductance quantum), 2G0 , 3G0 , and 4G0 . Each quantum number is equal to the number of atomic strands. First-principle calculations suggest that the atomic sheet should be deformed to explain this rule. It is likely that the gold atomic sheet is stabilized by an increment of the nonlocal bond because of the deformation.

  11. Study of laser welding of copper sheets

    OpenAIRE

    A. Klimpel; A. Rzeźnikiewicz; Ł. Janik

    2007-01-01

    Purpose: Purpose of this research is to study laser autogenous welding process of short seam beads and filletwelds of lap joints of oxygen-free copper sheets 1.0 [mm] thick. On the bases of results of quality assessment itwas proved that high power diode laser (HPDL) welded lap joints of copper sheet provide mechanical propertieson the level of parent material.Design/methodology/approach: Short seam beads and fillet welds of lap joints of oxygen-free copper sheets 1,0[mm] thick were tested, t...

  12. Bifurcation of Jovian magnetotail current sheet

    Directory of Open Access Journals (Sweden)

    P. L. Israelevich

    2006-07-01

    Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the Bx-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.

  13. Bifurcation of Jovian magnetotail current sheet

    Directory of Open Access Journals (Sweden)

    P. L. Israelevich

    2006-07-01

    Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the Bx-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.

  14. Shapeable sheet without plastic deformation

    Science.gov (United States)

    Oppenheimer, Naomi; Witten, Thomas A.

    2015-11-01

    Randomly crumpled sheets have shape memory. In order to understand the basis of this form of memory, we simulate triangular lattices of springs whose lengths are altered to create a topography with multiple potential energy minima. We then deform these lattices into different shapes and investigate their ability to retain the imposed shape when the energy is relaxed. The lattices are able to retain a range of curvatures. Under moderate forcing from a state of local equilibrium, the lattices deform by several percent but return to their retained shape when the forces are removed. By increasing the forcing until an irreversible motion occurs, we find that the transitions between remembered shapes show cooperativity among several springs. For fixed lattice structures, the shape memory tends to decrease as the lattice is enlarged; we propose ways to counter this decrease by modifying the lattice geometry. We survey the energy landscape by displacing individual nodes. An extensive fraction of these nodes proves to be bistable; they retain their displaced position when the energy is relaxed. Bending the lattice to a stable curved state alters the pattern of bistable nodes. We discuss this shapeability in the context of other forms of material memory and contrast it with the shapeability of plastic deformation. We outline the prospects for making real materials based on these principles.

  15. Photobiology Research Laboratory (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-06-01

    This fact sheet provides information about Photobiology Research Laboratory capabilities and applications at NREL. The photobiology group's research is in four main areas: (1) Comprehensive studies of fuel-producing photosynthetic, fermentative, and chemolithotrophic model microorganisms; (2) Characterization and engineering of redox enzymes and proteins for fuel production; (3) Genetic and pathway engineering of model organisms to improve production of hydrogen and hydrocarbon fuels; and (4) Studies of nanosystems using biological and non-biological materials in hybrid generation. NREL's photobiology research capabilities include: (1) Controlled and automated photobioreactors and fermenters for growing microorganisms under a variety of environmental conditions; (2) High-and medium-throughput screening of H{sub 2}-producing organisms; (3) Homologous and heterologous expression, purification, and biochemical/biophysical characterization of redox enzymes and proteins; (4) Qualitative and quantitative analyses of gases, metabolites, carbohydrates, lipids, and proteins; (5) Genetic and pathway engineering and development of novel genetic toolboxes; and (6) Design and spectroscopic characterization of enzyme-based biofuel cells and energy conversion nanodevices.

  16. Comparison of nylon monofilament suture and polytetrafluoroethylene sheet for frontalis suspension surgery in eyes with congenital ptosis.

    Science.gov (United States)

    Hayashi, Kengo; Katori, Nobutada; Kasai, Kenichiro; Kamisasanuki, Taro; Kokubo, Kenichi; Ohno-Matsui, Kyoko

    2013-04-01

    To compare nylon monofilament suture with polytetrafluoroethylene sheet for frontalis suspension surgery to treat eyes with congenital ptosis. Retrospective, nonrandomized, comparative, interventional case series. We reviewed the medical records of 49 patients who had undergone 79 eyelid frontalis suspension surgeries to treat congenital ptosis. All of the patients were younger than 16 years and had congenital ptosis with poor levator muscle function. They were treated with frontalis suspension surgery with either a nylon suture or a polytetrafluoroethylene sheet and were followed up for at least 1 year. A single rhomboid loop sling was used for the nylon suture surgery. For the polytetrafluoroethylene sheet, an incision was made in the eyelid crease, and one end of the sheet was fixed to the tarsus and the other was fixed to the frontalis muscle. The main outcome measures were postoperative recurrences and complications. We evaluated 37 eyelids of 25 patients after nylon suture surgery and 42 eyelids of 31 patients after polytetrafluoroethylene sheet surgery. Among these, 9 eyelids of 7 patients were included in both groups. The median postoperative follow-up period was 32 months in both groups. The recurrence rates were 62.2% for the nylon suture group and 0% for the polytetrafluoroethylene sheet group (P nylon suture group and 7.1% for the polytetrafluoroethylene sheet group (P > .05). Frontalis suspension using a polytetrafluoroethylene sheet with direct tarsus and frontalis muscle fixation is a reasonable technique with low rates of recurrences and complications. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Variability of Surface Temperature and Melt on the Greenland Ice Sheet, 2000-2011

    Science.gov (United States)

    Hall, Dorothy K.; Comiso, Josefino, C.; Shuman, Christopher A.; Koenig, Lora S.; DiGirolamo, Nicolo E.

    2012-01-01

    Enhanced melting along with surface-temperature increases measured using infrared satellite data, have been documented for the Greenland Ice Sheet. Recently we developed a climate-quality data record of ice-surface temperature (IST) of the Greenland Ice Sheet using the Moderate-Resolution Imaging Spectroradiometer (MODIS) 1ST product -- http://modis-snow-ice.gsfc.nasa.gov. Using daily and mean monthly MODIS 1ST maps from the data record we show maximum extent of melt for the ice sheet and its six major drainage basins for a 12-year period extending from March of 2000 through December of 2011. The duration of the melt season on the ice sheet varies in different drainage basins with some basins melting progressively earlier over the study period. Some (but not all) of the basins also show a progressively-longer duration of melt. The short time of the study period (approximately 12 years) precludes an evaluation of statistically-significant trends. However the dataset provides valuable information on natural variability of IST, and on the ability of the MODIS instrument to capture changes in IST and melt conditions indifferent drainage basins of the ice sheet.

  18. Developing and validating a patient monitoring flow sheet in intensive care units.

    Science.gov (United States)

    Irajpour, Alireza; Salimi, Marziye; Mardanian, Leila; Rahimi, Mojtaba

    2014-07-01

    Intensive care unit is a center to provide comprehensive care for critically ill patients whose condition can be improved by receiving specialized care. The importance of accurate and rapid monitoring of patients at this precise moment is in recording patient data and its comparison with previous data. Monitoring the patient by either devices or direct examination of the nurses requires accurate documentation. Hence, accuracy of the documentation is essential to enhance the quality of care, despite the high volume of data in intensive care unit. This study was conducted by review of domestic and international texts through Delphi method. There were 20 participants in Delphi stage. Data were collected by the questionnaires sent in two stages. Experts' panel was used to complete and finalize the obtained structures. Data analysis was conducted by descriptive statistics in the form of frequency percentage. In a review of 15 domestic and international flow sheets as well as 30 reference texts and 80 articles, 99 primary flow sheet structures were detected, of which 58 had a consensus of >70%. With the goal of avoiding repetition and making the recordable data brief, and with respect to the nurses' initial assessment in better planning and administration of care, a flow sheet was designed as a nursing admission sheet to be completed at the moment of admission. Its content and template had consensus among the panel of experts, and the instruction for complement of the sheets was finally developed. After obtaining content validity and including the given indications, daily monitoring sheet and admission sheet were developed.

  19. A quasi-analytical ice-sheet model for climate studies

    Directory of Open Access Journals (Sweden)

    J. Oerlemans

    2003-01-01

    Full Text Available A simple quasi-analytical model is developed to study the response of ice-sheets to climate change. The model is axisymmetrical and rests on a bed with a constant slope. The mechanics are highly parameterised. The climatic conditions are represented by the altitude of the runoff line. Above the runoff line the accumulation rate is constant (but may depend on, for instance, the ice-sheet size, below the runoff line the balance gradient is constant. The ice-sheet may extend into the sea and can respond to changes in sea level. At the grounding line the ice velocity is assumed to be proportional to the water depth. For this set-up an explicit expression for the total mass budget of the ice-sheet is derived. To illustrate the properties and possibilities of the model, equilibrium states are analysed and the response to periodic forcing is studied as well. The coupling of mass balance and surface elevation of the ice-sheet leads to nonlinear behaviour and branching of the equilibrium solutions. The qualitative behaviour of the system is that of the cusp catastrophe. Nonlinear effects are more pronounced when the slope of the bed is smaller. A case is discussed in which two ice-sheets are coupled by making the altitude of the runoff line dependent on the total area of the two ice-sheets. On two continents, having a slightly different glaciation threshold, periodic forcing of the altitude of the runoff line is imposed. It is shown that in such a situation variations on a long time scale (two to three times the period of the forcing are introduced. Finally the model is forced by the GISP d18O record for the last 120 000 years. For an appropriate choice of parameters the model simulates well the waxing and waning of the Laurentide, Fennoscandian and Barentsz ice-sheets.

  20. 40 CFR 63.2390 - What records must I keep?

    Science.gov (United States)

    2010-07-01

    ... performance evaluation plans; and (2) You must keep the records required to show continuous compliance, as..., has been performed. Various methods for the record of verification can be used, such as: A check-off on a log sheet, a list of U.S. DOT serial numbers or Method 27 data, or a position description for...

  1. Oscillation of the current sheet velocity in plasma focus discharges

    International Nuclear Information System (INIS)

    Melzacki, K.; Nardi, V.

    1994-01-01

    The oscillation of the propagation speed of the plasma focus current sheet has been recorded with schlieren photography. The sheet stuttering in the propagation during the implosion phase has a frequency of about 60 MHz. The effect could be recorded due to application of long exposure time (60 ns) technique. It is not detectable in the subnanosecond pictures. The pictures are taken in black schlieren. The probing range of the electron density gradient, with integration along the path of the 1 J, Q-switched ruby laser beam, has been selected by the size of the stop and aperture within 3 x 10 18 cm -3 and 3 x 10 20 cm -3 . Raising the sensitivity threshold to 2 x 10 19 cm -3 (refraction angle of 4 mrad) has helped to clear the pictures by limiting their image to high gradients of density only. With this technique (and other diagnostic methods) the dynamics of 6 kJ, 16 kV plasma focus discharges in deuterium at 5 torr, with a 10% decrease of the magnetic insulation at the breech has been investigated. The average implosion velocity of the current sheath obtained with this effect, 5 x 10 6 cm/s, is consistent with those measured by the smear effect, and the electric probe. The electron density gradient has been determined at several instants; at the pinch time it is (3 ± 1.5) x 10 20 cm -4 . The data are discussed on the basis of several pictures

  2. Advancing Concentrating Solar Power Research (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2014-02-01

    Researchers at the National Renewable Energy Laboratory (NREL) provide scientific, engineering, and analytical expertise to help advance innovation in concentrating solar power (CSP). This fact sheet summarizes how NREL is advancing CSP research.

  3. Western Abandoned Uranium Mine Region Fact Sheets

    Science.gov (United States)

    Fact sheets related to Western Abandoned Uranium Mine (AUM) Region, more than 100 abandoned uranium mine claims located along the Little Colorado River and Highway 89, ain the Cameron, Coalmine Canyon, Bodaway/Gap, and Leupp Chapters in Northern Arizona.

  4. Drinking Water Fact Sheet: Coliform Bacteria

    OpenAIRE

    Mesner, Nancy; Daniels, Barbara

    2010-01-01

    This fact sheet provides information about coliform bacteria. Including sections about what coliform bacteria is, how it enters drinking water, health concerns from exposure, drinking water standards, and how to treat drinking water that contains coliforms.

  5. Hydrologic Outlets of the Greenland Ice Sheet

    Data.gov (United States)

    National Aeronautics and Space Administration — The Hydrologic Outlets of the Greenland Ice Sheet data set contains GIS point shapefiles that include 891 observed and potential hydrologic outlets of the Greenland...

  6. HIV/AIDS Clinical Trials Fact Sheet

    Science.gov (United States)

    ... AIDS Drugs Clinical Trials Apps skip to content HIV Overview Home Understanding HIV/AIDS Fact Sheets HIV/ ... 4 p.m. ET) Send us an email HIV/AIDS Clinical Trials Last Reviewed: August 25, 2017 ...

  7. Proctor Creek Boone Boulevard Fact Sheet

    Science.gov (United States)

    This fact sheet provides an overview of the Proctor Creek watershed and community, green infrastructure, the Boone Boulevard Green Street Project Conceptual Design, and the added value and application of Health Impact Assessment (HIA) to the project.

  8. Clean Cities Program Contacts (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-03-01

    This fact sheet provides contact information for program staff of the U.S. Department of Energy's Clean Cities program, as well as contact information for the nearly 100 local Clean Cities coalitions across the country.

  9. fibrin–chitosan–sodium alginate composite sheet

    Indian Academy of Sciences (India)

    sodium alginate composite (F–C–SA) in sheet form. F–C–SA composite was prepared and characterized for its physicochemical properties like water absorption capacity, surface morphology, FTIR spectra and mechanical properties.

  10. Matrix Models and String World Sheet Duality

    OpenAIRE

    de Alwis, S. P.

    1997-01-01

    The scaling limit used recently to derive matrix models, and a certain analyticity assumption, are invoked to argue that the agreement between some matrix model calculations and supergravity is a consequence of string world sheet duality.

  11. Nanotechnology for Site Remediation: Fact Sheet

    Science.gov (United States)

    This fact sheet presents a snapshot of nanotechnology and its current uses in remediation. It presents information to help site project managers understand the potential applications of this group of technologies at their sites.

  12. Greenland Radar Ice Sheet Thickness Measurements

    Data.gov (United States)

    National Aeronautics and Space Administration — Two 150-MHz coherent radar depth sounders were developed and flown over the Greenland ice sheet to obtain ice thickness measurements in support of PARCA...

  13. Coordinated Specialty Care Fact Sheet and Checklist

    Science.gov (United States)

    ... Checklist Share Coordinated Specialty Care Fact Sheet and Checklist Download PDF Download ePub Order a free hardcopy ... webpage: http://www.nimh.nih.gov/raise . CSC Checklist If you are interested in a CSC program, ...

  14. Polycystic Ovary Syndrome (PCOS) Fact Sheet

    Science.gov (United States)

    ... this section Home A-Z Health Topics Polycystic ovary syndrome Polycystic ovary syndrome > A-Z Health Topics Polycystic ovary syndrome fact sheet (PDF, 126 KB) Normal ovary and polycystic ovary The javascript used in this widget is ...

  15. Geometry of Thin Nematic Elastomer Sheets

    Science.gov (United States)

    Aharoni, Hillel; Sharon, Eran; Kupferman, Raz

    2014-12-01

    A thin sheet of nematic elastomer attains 3D configurations depending on the nematic director field upon heating. In this Letter, we describe the intrinsic geometry of such a sheet and derive an expression for the metric induced by general nematic director fields. Furthermore, we investigate the reverse problem of constructing a director field that induces a specified 2D geometry. We provide an explicit recipe for how to construct any surface of revolution using this method. Finally, we show that by inscribing a director field gradient across the sheet's thickness, one can obtain a nontrivial hyperbolic reference curvature tensor, which together with the prescription of a reference metric allows dictation of actual configurations for a thin sheet of nematic elastomer.

  16. Wall Insulation; BTS Technology Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    Southface Energy Institute; Tromly, K.

    2000-11-07

    Properly sealed, moisture-protected, and insulated walls help increase comfort, reduce noise, and save on energy costs. This fact sheet addresses these topics plus advanced framing techniques, insulation types, wall sheathings, and steps for effective wall construction and insulation.

  17. Fact Sheet: Early Warning Signs of Psychosis

    Science.gov (United States)

    ... items) Share Fact Sheet: Early Warning Signs of Psychosis Download PDF Download ePub Order a free hardcopy ... show changes in his or her behaviors before psychosis develops. The list below includes several warning signs ...

  18. Force focusing in confined fibres and sheets

    Energy Technology Data Exchange (ETDEWEB)

    Romero, Victor; Cerda, Enrique [Departamento de Fisica, Universidad de Santiago, Av. Ecuador 3493, Santiago (Chile); Witten, T A; Liang Tao [James Franck Institute, University of Chicago, Chicago IL 60637 (United States)], E-mail: t-witten@uchicago.edu

    2008-07-07

    A thin fibre or sheet curled into a circular container has a detached region whose shape and force ratios are independent of material properties and container radius. We compute this shape and compare it with experiments. The discrete forces acting at either end of the detached region have a ratio that depends only on the length of the fibre or sheet relative to the circle radius. We calculate this force ratio in three regimes of circle radius. (fast track communication)

  19. Preparation and transplantation of photoreceptor sheets.

    Science.gov (United States)

    Huang, J C; Ishida, M; Hersh, P; Sugino, I K; Zarbin, M A

    1998-06-01

    Photoreceptor (PR) transplantation may be a treatment for blindness secondary to PR degeneration. We studied different technical aspects of PR-sheet preparation. Geographic variation in the thickness of the cat PR layer (from the outer segments to the outer plexiform layer) and inner retina (width of the remainder of the retina) was studied. PR sheets (cat and human) were prepared through gelatin embedding and subsequent vibratoming or excimer laser ablation. Cat PR sheets were evaluated after transplantation. The thickness of the cat PR layer and inner retina varied in different regions. The superior central retina, including the area centralis, was thickest (PR layer: 115-123 microm, entire retina: 225-230 microm, in fixed tissue). The peripheral retina was approximately 40% thinner than the center. Fresh retina was approximately 7.9% thicker than the fixed retina. Both vibratomy and excimer laser ablation removed the inner retina, leaving a PR-layer sheet with good morphology. To produce good quality PR sheets with vibratomy, use of different gelatin concentrations (2% to 35%) at various stages of sheet preparation was crucial. To produce PR sheets of uniform thickness with excimer laser ablation, control of fluid on the retinal surface was critical. Twenty-four hours after PR transplantation surgery, donor PR cells were well oriented and in close contact with host retinal pigment epithelial cells. Gelatin supporting the transplant dissolved as early as 100 min after surgery. We confirmed and expanded the work of previous investigators and showed that cat and human PR sheets can be manufactured using vibratomy or excimer laser ablation. This preparation provides a well oriented and organized PR cell layer after transplantation.

  20. Balance of the West Antarctic Ice Sheet

    Science.gov (United States)

    2002-01-01

    For several decades, measurements of the West Antarctic Ice Sheet showed it to be retreating rapidly. But new data derived from satellite-borne radar sensors show the ice sheet to be growing. Changing Antarctic ice sheets remains an area of high scientific interest, particularly in light of recent global warming concerns. These new findings are significant because scientists estimate that sea level would rise 5-6 meters (16-20 feet) if the ice sheet collapsed into the sea. Do these new measurements signal the end of the ice sheet's 10,000-year retreat? Or, are these new satellite data simply much more accurate than the sparse ice core and surface measurements that produced the previous estimates? Another possibility is that the ice accumulation may simply indicate that the ice sheet naturally expands and retreats in regular cycles. Cryologists will grapple with these questions, and many others, as they examine the new data. The image above depicts the region of West Antarctica where scientists measured ice speed. The fast-moving central ice streams are shown in red. Slower tributaries feeding the ice streams are shown in blue. Green areas depict slow-moving, stable areas. Thick black lines depict the areas that collect snowfall to feed their respective ice streams. Reference: Ian Joughin and Slawek Tulaczyk Science Jan 18 2002: 476-480. Image courtesy RADARSAT Antarctic Mapping Project

  1. Antibubbles and fine cylindrical sheets of air

    KAUST Repository

    Beilharz, D.

    2015-08-14

    Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a higher-viscosity drop onto a lower-viscosity pool, we have explored new geometries of such air films. In this way we are able to maintain stable air layers which can wrap around the entire drop to form repeatable antibubbles, i.e. spherical air layers bounded by inner and outer liquid masses. Furthermore, for the most viscous drops they enter the pool trailing a viscous thread reaching all the way to the pinch-off nozzle. The air sheet can also wrap around this thread and remain stable over an extended period of time to form a cylindrical air sheet. We study the parameter regime where these structures appear and their subsequent breakup. The stability of these thin cylindrical air sheets is inconsistent with inviscid stability theory, suggesting stabilization by lubrication forces within the submicron air layer. We use interferometry to measure the air-layer thickness versus depth along the cylindrical air sheet and around the drop. The air film is thickest above the equator of the drop, but thinner below the drop and up along the air cylinder. Based on microbubble volumes, the thickness of the cylindrical air layer becomes less than 100 nm before it ruptures.

  2. Buckling Behavior of Substrate Supported Graphene Sheets

    Directory of Open Access Journals (Sweden)

    Kuijian Yang

    2016-01-01

    Full Text Available The buckling of graphene sheets on substrates can significantly degrade their performance in materials and devices. Therefore, a systematic investigation on the buckling behavior of monolayer graphene sheet/substrate systems is carried out in this paper by both molecular mechanics simulations and theoretical analysis. From 70 simulation cases of simple-supported graphene sheets with different sizes under uniaxial compression, two different buckling modes are investigated and revealed to be dominated by the graphene size. Especially, for graphene sheets with length larger than 3 nm and width larger than 1.1 nm, the buckling mode depends only on the length/width ratio. Besides, it is revealed that the existence of graphene substrate can increase the critical buckling stress and strain to 4.39 N/m and 1.58%, respectively, which are about 10 times those for free-standing graphene sheets. Moreover, for graphene sheets with common size (longer than 20 nm, both theoretical and simulation results show that the critical buckling stress and strain are dominated only by the adhesive interactions with substrate and independent of the graphene size. Results in this work provide valuable insight and guidelines for the design and application of graphene-derived materials and nano-electromechanical systems.

  3. Buckling Behavior of Substrate Supported Graphene Sheets.

    Science.gov (United States)

    Yang, Kuijian; Chen, Yuli; Pan, Fei; Wang, Shengtao; Ma, Yong; Liu, Qijun

    2016-01-07

    The buckling of graphene sheets on substrates can significantly degrade their performance in materials and devices. Therefore, a systematic investigation on the buckling behavior of monolayer graphene sheet/substrate systems is carried out in this paper by both molecular mechanics simulations and theoretical analysis. From 70 simulation cases of simple-supported graphene sheets with different sizes under uniaxial compression, two different buckling modes are investigated and revealed to be dominated by the graphene size. Especially, for graphene sheets with length larger than 3 nm and width larger than 1.1 nm, the buckling mode depends only on the length/width ratio. Besides, it is revealed that the existence of graphene substrate can increase the critical buckling stress and strain to 4.39 N/m and 1.58%, respectively, which are about 10 times those for free-standing graphene sheets. Moreover, for graphene sheets with common size (longer than 20 nm), both theoretical and simulation results show that the critical buckling stress and strain are dominated only by the adhesive interactions with substrate and independent of the graphene size. Results in this work provide valuable insight and guidelines for the design and application of graphene-derived materials and nano-electromechanical systems.

  4. History of the Greenland Ice Sheet: paleoclimatic insights

    DEFF Research Database (Denmark)

    Alley, Richard B.; Andrews, John Thomas; Brigham-Grette, Julia

    2010-01-01

    -sheet changes. In contrast, there are no documented major ice-sheet changes that occurred independent of temperature changes. Moreover, snowfall has increased when the climate warmed, but the ice sheet lost mass nonetheless; increased accumulation in the ice sheet's center has not been sufficient to counteract...

  5. 17 CFR 210.6-04 - Balance sheets.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.6-04... sheets. This rule is applicable to balance sheets filed by registered investment companies except for... of this part. Balance sheets filed under this rule shall comply with the following provisions: Assets...

  6. RECORDS REACHING RECORDING DATA TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    G. W. L. Gresik

    2013-07-01

    Full Text Available The goal of RECORDS (Reaching Recording Data Technologies is the digital capturing of buildings and cultural heritage objects in hard-to-reach areas and the combination of data. It is achieved by using a modified crane from film industry, which is able to carry different measuring systems. The low-vibration measurement should be guaranteed by a gyroscopic controlled advice that has been , developed for the project. The data were achieved by using digital photography, UV-fluorescence photography, infrared reflectography, infrared thermography and shearography. Also a terrestrial 3D laser scanner and a light stripe topography scanner have been used The combination of the recorded data should ensure a complementary analysis of monuments and buildings.

  7. ATLAS Recordings

    CERN Multimedia

    Steven Goldfarb; Mitch McLachlan; Homer A. Neal

    Web Archives of ATLAS Plenary Sessions, Workshops, Meetings, and Tutorials from 2005 until this past month are available via the University of Michigan portal here. Most recent additions include the Trigger-Aware Analysis Tutorial by Monika Wielers on March 23 and the ROOT Workshop held at CERN on March 26-27.Viewing requires a standard web browser with RealPlayer plug-in (included in most browsers automatically) and works on any major platform. Lectures can be viewed directly over the web or downloaded locally.In addition, you will find access to a variety of general tutorials and events via the portal.Feedback WelcomeOur group is making arrangements now to record plenary sessions, tutorials, and other important ATLAS events for 2007. Your suggestions for potential recording, as well as your feedback on existing archives is always welcome. Please contact us at wlap@umich.edu. Thank you.Enjoy the Lectures!

  8. Comparison of manufacturing of lightweight corrugated sheet sandwiches by hydroforming and incremental sheet forming

    Science.gov (United States)

    Maqbool, Fawad; Elze, Lars; Seidlitz, Holger; Bambach, Markus

    2016-10-01

    Sandwich materials made from corrugated sheet metal provide excellent mechanical properties for lightweight design without using filler material. The increased mechanical properties of these sandwich materials are achieved by the 3-D geometry of the corrugated sheet and the hardening due to pre-forming. In the present study, manufacturing of corrugated sheet metal consisting of hexagonal bulge patterns through hydroforming and incremental forming is analyzed. Double layered corrugated sheet metal sandwiches with hexagonal patterns of free-form bulge geometries are investigated through finite element analysis for the maximum increase in stiffness over the normal flat sheets. The analysis shows that a bending stiffness increase of up to 13 times over flat sheet of the same mass is attainable by corrugated sandwiches. Further, it is proved for these types of corrugation sandwiches that stiffness increases by increasing the height of the corrugation bulge but that hydroforming poses restrictions with respect to bulge height, since it is limited by forming force and formability of the material. Incremental sheet metal forming can be used to produce sheets with a hexagonal bulge pattern with increased height. Hence, a higher increase in stiffness as compared to hydroforming is possible but at the expense of process speed.

  9. A very thin light sheet technique used to investigate meniscus shapes by laser induced fluorescence

    International Nuclear Information System (INIS)

    Khan, M.A.

    2003-01-01

    In this paper a light sheet technique is described to accurately (50 μm) measure meniscus profiles in film formation problems. The use of a slit to create the thin (0.1 mm) laser sheet makes the technique easy to implement, and allows tunable sheet thickness. The low light intensity obtained through the slit is compensated by the induced fluorescence of the tested fluid, which provides good picture contrast. After video recording through a microscope, the actual meniscus is recovered by image processing and proper calibration. The efficiency of the technique is demonstrated on a coating flow experiment. Due to its good accuracy and ease of use, this technique is expected to provide useful quantitative information about meniscus problems, in particular for the validation of computational fluid dynamics CFD solutions of coating flows. (author)

  10. On the reconstruction of palaeo-ice sheets: Recent advances and future challenges

    Science.gov (United States)

    Stokes, Chris R.; Tarasov, Lev; Blomdin, Robin; Cronin, Thomas M.; Fisher, Timothy G.; Gyllencreutz, Richard; Hattestrand, Clas; Heyman, Jakob; Hindmarsh, Richard C. A.; Hughes, Anna L. C.; Jakobsson, Martin; Kirchner, Nina; Livingstone, Stephen J.; Margold, Martin; Murton, Julian B.; Noormets, Riko; Peltier, W. Richard; Peteet, Dorothy M.; Piper, David J. W.; Preusser, Frank; Renssen, Hans; Roberts, David H.; Roche, Didier M.; Saint-Ange, Francky; Stroeven, Arjen P.; Teller, James T.

    2015-01-01

    Reconstructing the growth and decay of palaeo-ice sheets is critical to understanding mechanisms of global climate change and associated sea-level fluctuations in the past, present and future. The significance of palaeo-ice sheets is further underlined by the broad range of disciplines concerned with reconstructing their behaviour, many of which have undergone a rapid expansion since the 1980s. In particular, there has been a major increase in the size and qualitative diversity of empirical data used to reconstruct and date ice sheets, and major improvements in our ability to simulate their dynamics in numerical ice sheet models. These developments have made it increasingly necessary to forge interdisciplinary links between sub-disciplines and to link numerical modelling with observations and dating of proxy records. The aim of this paper is to evaluate recent developments in the methods used to reconstruct ice sheets and outline some key challenges that remain, with an emphasis on how future work might integrate terrestrial and marine evidence together with numerical modelling. Our focus is on pan-ice sheet reconstructions of the last deglaciation, but regional case studies are used to illustrate methodological achievements, challenges and opportunities. Whilst various disciplines have made important progress in our understanding of ice-sheet dynamics, it is clear that data-model integration remains under-used, and that uncertainties remain poorly quantified in both empirically-based and numerical ice-sheet reconstructions. The representation of past climate will continue to be the largest source of uncertainty for numerical modelling. As such, palaeo-observations are critical to constrain and validate modelling. State-of-the-art numerical models will continue to improve both in model resolution and in the breadth of inclusion of relevant processes, thereby enabling more accurate and more direct comparison with the increasing range of palaeo-observations. Thus

  11. On the Reconstruction of Palaeo-Ice Sheets: Recent Advances and Future Challenges

    Science.gov (United States)

    Stokes, Chris R.; Tarasov, Lev; Blomdin, Robin; Cronin, Thomas M.; Fisher, Timothy G.; Gyllencreutz, Richard; Hattestrand, Clas; Heyman, Jacob; Hindmarsh, Richard C. A.; Hughes, Anna L. C.; hide

    2015-01-01

    Reconstructing the growth and decay of palaeo-ice sheets is critical to understanding mechanisms of global climate change and associated sea-level fluctuations in the past, present and future. The significance of palaeo-ice sheets is further underlined by the broad range of disciplines concerned with reconstructing their behaviour, many of which have undergone a rapid expansion since the 1980s. In particular, there has been a major increase in the size and qualitative diversity of empirical data used to reconstruct and date ice sheets, and major improvements in our ability to simulate their dynamics in numerical ice sheet models. These developments have made it increasingly necessary to forge interdisciplinary links between sub-disciplines and to link numerical modelling with observations and dating of proxy records. The aim of this paper is to evaluate recent developments in the methods used to reconstruct ice sheets and outline some key challenges that remain, with an emphasis on how future work might integrate terrestrial and marine evidence together with numerical modelling. Our focus is on pan-ice sheet reconstructions of the last deglaciation, but regional case studies are used to illustrate methodological achievements, challenges and opportunities. Whilst various disciplines have made important progress in our understanding of ice-sheet dynamics, it is clear that data-model integration remains under-used, and that uncertainties remain poorly quantified in both empirically-based and numerical ice-sheet reconstructions. The representation of past climate will continue to be the largest source of uncertainty for numerical modelling. As such, palaeo-observations are critical to constrain and validate modelling. State-of-the-art numerical models will continue to improve both in model resolution and in the breadth of inclusion of relevant processes, thereby enabling more accurate and more direct comparison with the increasing range of palaeo-observations. Thus

  12. Monolithic graphene oxide sheets with controllable composition.

    Science.gov (United States)

    Chu, Jae Hwan; Kwak, Jinsung; Kim, Sung-Dae; Lee, Mi Jin; Kim, Jong Jin; Park, Soon-Dong; Choi, Jae-Kyung; Ryu, Gyeong Hee; Park, Kibog; Kim, Sung Youb; Kim, Ji Hyun; Lee, Zonghoon; Kim, Young-Woon; Kwon, Soon-Yong

    2014-02-28

    Graphene oxide potentially has multiple applications and is typically prepared by solution-based chemical means. To date, the synthesis of a monolithic form of graphene oxide that is crucial to the precision assembly of graphene-based devices has not been achieved. Here we report the physical approach to produce monolithic graphene oxide sheets on copper foil using solid carbon, with tunable oxygen-to-carbon composition. Experimental and theoretical studies show that the copper foil provides an effective pathway for carbon diffusion, trapping the oxygen species dissolved in copper and enabling the formation of monolithic graphene oxide sheets. Unlike chemically derived graphene oxide, the as-synthesized graphene oxide sheets are electrically active, and the oxygen-to-carbon composition can be tuned during the synthesis process. As a result, the resulting graphene oxide sheets exhibit tunable bandgap energy and electronic properties. Our solution-free, physical approach may provide a path to a new class of monolithic, two-dimensional chemically modified carbon sheets.

  13. Connections of Trapezoidal Sheets under Fire

    Directory of Open Access Journals (Sweden)

    P. Kallerová

    2009-01-01

    Full Text Available This paper describes two different experiments on connections of trapezoidal sheets under elevated temperatures. The first experiments were tensile tests carried out on four sets of tests with screwed connections under ambient and elevated temperatures. One diameter of self-drilling screws and three different thicknesses of trapezoidal sheets were used. The applied screws were without washers, or with sealed or steel washers. The second experiment was performed in a laboratory furnace to check the catenary action of a thin-walled trapezoidal sheet. The basic theory tested in this experiment was that in the first phase of the fire the sheet behaves as a simply supported beam, while in the second phase the load bearing is transferred by a tension membrane. These experiments will be used to develop a design model of connections at high temperatures. High fire resistance of the trapezoidal sheet, dependent on suitable design of the screwed connection to the bearing structure, was confirmed. The experiment with the simple beam also confirmed catenary action. 

  14. Clouds enhance Greenland ice sheet meltwater runoff.

    Science.gov (United States)

    Van Tricht, K; Lhermitte, S; Lenaerts, J T M; Gorodetskaya, I V; L'Ecuyer, T S; Noël, B; van den Broeke, M R; Turner, D D; van Lipzig, N P M

    2016-01-12

    The Greenland ice sheet has become one of the main contributors to global sea level rise, predominantly through increased meltwater runoff. The main drivers of Greenland ice sheet runoff, however, remain poorly understood. Here we show that clouds enhance meltwater runoff by about one-third relative to clear skies, using a unique combination of active satellite observations, climate model data and snow model simulations. This impact results from a cloud radiative effect of 29.5 (±5.2) W m(-2). Contrary to conventional wisdom, however, the Greenland ice sheet responds to this energy through a new pathway by which clouds reduce meltwater refreezing as opposed to increasing surface melt directly, thereby accelerating bare-ice exposure and enhancing meltwater runoff. The high sensitivity of the Greenland ice sheet to both ice-only and liquid-bearing clouds highlights the need for accurate cloud representations in climate models, to better predict future contributions of the Greenland ice sheet to global sea level rise.

  15. Plasmoid Instability in Forming Current Sheets

    Science.gov (United States)

    Comisso, L.; Lingam, M.; Huang, Y.-M.; Bhattacharjee, A.

    2017-12-01

    The plasmoid instability has revolutionized our understanding of magnetic reconnection in astrophysical environments. By preventing the formation of highly elongated reconnection layers, it is crucial in enabling the rapid energy conversion rates that are characteristic of many astrophysical phenomena. Most previous studies have focused on Sweet-Parker current sheets, which are unattainable in typical astrophysical systems. Here we derive a general set of scaling laws for the plasmoid instability in resistive and visco-resistive current sheets that evolve over time. Our method relies on a principle of least time that enables us to determine the properties of the reconnecting current sheet (aspect ratio and elapsed time) and the plasmoid instability (growth rate, wavenumber, inner layer width) at the end of the linear phase. After this phase the reconnecting current sheet is disrupted and fast reconnection can occur. The scaling laws of the plasmoid instability are not simple power laws, and they depend on the Lundquist number (S), the magnetic Prandtl number (P m ), the noise of the system ({\\psi }0), the characteristic rate of current sheet evolution (1/τ ), and the thinning process. We also demonstrate that previous scalings are inapplicable to the vast majority of astrophysical systems. We explore the implications of the new scaling relations in astrophysical systems such as the solar corona and the interstellar medium. In both of these systems, we show that our scaling laws yield values for the growth rate, wavenumber, and aspect ratio that are much smaller than the Sweet-Parker-based scalings.

  16. Ultrasonic imaging of sheet metal forming.

    Science.gov (United States)

    Keitmann-Curdes, Oliver; Hansen, Christian; Knoll, Patrick; Meier, Horst; Ermert, Helmut

    2004-04-01

    With sheet metal hydroforming, a sheet metal is formed by a liquid medium under high pressure (up to 1000 bar) and a cavity contour (die). As the exact state of forming is of interest, an ultrasonic imaging system is under development. The task is to determine the geometry of a sheet metal contour with respect to the original (before forming) and the final (die) state of the sheet metal. For this purpose, two different contour reconstruction algorithms were designed, tested and compared. With the reconstruction results it will be possible to determine the optimal distribution of transmitters and receivers in the ultrasonic transducer matrix. Experiments were conducted with one pair of transducers (unfocussed, center frequency 2 MHz) and a three axis stepper motor set-up. For each experimental set of data, the contour was reconstructed with both SAFT reconstruction algorithms. Both algorithms incorporate a priori information such as original and final contour and maximal axial dislocation of the sheet metal. The results for both algorithms are compared and the relative mean error in axial direction is 0.30% and 0.48%.

  17. Interaction of ice sheets and climate during the past 800 000 years

    Directory of Open Access Journals (Sweden)

    L. B. Stap

    2014-12-01

    Full Text Available During the Cenozoic, land ice and climate interacted on many different timescales. On long timescales, the effect of land ice on global climate and sea level is mainly set by large ice sheets in North America, Eurasia, Greenland and Antarctica. The climatic forcing of these ice sheets is largely determined by the meridional temperature profile resulting from radiation and greenhouse gas (GHG forcing. As a response, the ice sheets cause an increase in albedo and surface elevation, which operates as a feedback in the climate system. To quantify the importance of these climate–land ice processes, a zonally averaged energy balance climate model is coupled to five one-dimensional ice sheet models, representing the major ice sheets. In this study, we focus on the transient simulation of the past 800 000 years, where a high-confidence CO2 record from ice core samples is used as input in combination with Milankovitch radiation changes. We obtain simulations of atmospheric temperature, ice volume and sea level that are in good agreement with recent proxy-data reconstructions. We examine long-term climate–ice-sheet interactions by a comparison of simulations with uncoupled and coupled ice sheets. We show that these interactions amplify global temperature anomalies by up to a factor of 2.6, and that they increase polar amplification by 94%. We demonstrate that, on these long timescales, the ice-albedo feedback has a larger and more global influence on the meridional atmospheric temperature profile than the surface-height-temperature feedback. Furthermore, we assess the influence of CO2 and insolation by performing runs with one or both of these variables held constant. We find that atmospheric temperature is controlled by a complex interaction of CO2 and insolation, and both variables serve as thresholds for northern hemispheric glaciation.

  18. Record dynamics

    DEFF Research Database (Denmark)

    Robe, Dominic M.; Boettcher, Stefan; Sibani, Paolo

    2016-01-01

    When quenched rapidly beyond their glass transition, colloidal suspensions fall out of equilibrium. The pace of their dynamics then slows down with the system age, i.e., with the time elapsed after the quench. This breaking of time translational invariance is associated with dynamical observables......-facto irreversible and become increasingly harder to achieve. Thus, a progression of record-sized dynamical barriers are traversed in the approach to equilibration. Accordingly, the statistics of the events is closely described by a log-Poisson process. Originally developed for relaxation in spin glasses...

  19. Control of downy mildew in greenhouse-grown cucumbers using blue photoselective polyethylene sheets

    International Nuclear Information System (INIS)

    Reuveni, R.; Raviv, M.

    1997-01-01

    Six types of polyethylene sheets with or without a blue pigment, having an absorption peak at the yellow part of the spectrum (580 nm), in combination with three levels of UV-B (280 to 320 nm) absorbance, were investigated for their effects on sporangial production and colonization of Pseudoperonospora cubensis on cucumbers in growth chambers. The effect of these photoselective sheets on the epidemiology of downy mildew in greenhouse-grown cucumbers has been investigated in several locations. The addition of the blue pigment to the films resulted in a significant inhibition of colonization and sporangial production of P. cubensis, whereas filtration of the UV spectrum enhanced the colonization but had no effect on the sporangial production. The appearance of the first symptom-bearing plants was delayed under the blue covers, and consequently, a significant reduction in the disease incidence of downy mildew was recorded under all blue sheets at each corresponding level of UV-B transmittance in five different field experiments through four seasons. Regardless of the differences in disease incidence, there were no significant differences among the yields that were obtained under the various sheets, probably due to the lower photosynthetically active radiation transmissivity of the blue films. The optimal features required for a desirable commercial sheet are discussed

  20. Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN

    Science.gov (United States)

    Moayedfar, Majid; Hanaei, Hengameh; Majdi Rani, Ahmad; Musa, Mohd Azam Bin; Sadegh Momeni, Mohammad

    2018-03-01

    The application of incremental sheet forming process as a rapid forming technique is rising in variety of industries such as aerospace, automotive and biomechanical purposes. However, the sheet failure is a big challenge in this process which leads wasting lots of materials. Hence, this study tried to propose a method to predict the early sheet failure in this process using mathematical solution. For the feasibility of the study, design of experiment with the respond surface method is employed to extract a set of experiments data for the simulation. The significant forming parameters were recognized and their integration was used for prediction system. Then, the results were inserted to the artificial neural network as input parameters to predict a vast range of applicable parameters avoiding sheet failure in ISF. The value of accuracy R2 ∼0.93 was obtained and the maximum sheet stretch in the depth of 25mm were recorded. The figures generate from the trend of interaction between effective parameters were provided for future studies.

  1. ATLAS Recordings

    CERN Multimedia

    Jeremy Herr; Homer A. Neal; Mitch McLachlan

    The University of Michigan Web Archives for the 2006 ATLAS Week Plenary Sessions, as well as the first of 2007, are now online. In addition, there are a wide variety of Software and Physics Tutorial sessions, recorded over the past couple years, to chose from. All ATLAS-specific archives are accessible here.Viewing requires a standard web browser with RealPlayer plug-in (included in most browsers automatically) and works on any major platform. Lectures can be viewed directly over the web or downloaded locally.In addition, you will find access to a variety of general tutorials and events via the portal. Shaping Collaboration 2006The Michigan group is happy to announce a complete set of recordings from the Shaping Collaboration conference held last December at the CICG in Geneva.The event hosted a mix of Collaborative Tool experts and LHC Users, and featured presentations by the CERN Deputy Director General, Prof. Jos Engelen, the President of Internet2, and chief developers from VRVS/EVO, WLAP, and other tools...

  2. Record Club

    CERN Multimedia

    Record Club

    2011-01-01

    http://cern.ch/Record.Club Nouveautés été 2011 Le club de location de CDs et de DVDs vient d’ajouter un grand nombre de disques pour l’été 2011. Parmi eux, Le Discours d’un Roi, oscar 2011 du meilleur film et Harry Potter les reliques de la mort (1re partie). Ce n’est pas moins de 48 DVDs et 10 CDs nouveaux qui vous sont proposés à la location. Il y en a pour tous les genres. Alors n’hésitez pas à consulter notre site http://cern.ch/record.club, voir Disc Catalogue, Discs of the month pour avoir la liste complète. Le club est ouvert tous les Lundi, Mercredi, Vendredi de 12h30 à 13h dans le bâtiment du restaurent N°2 (Cf. URL: http://www.cern.ch/map/building?bno=504) A très bientôt.  

  3. Record Club

    CERN Multimedia

    Record Club

    2011-01-01

    http://cern.ch/Record.Club June Selections We have put a significant number of new CDs and DVDs into the Club You will find the full lists at http://cern.ch/record.club and select the «Discs of the Month» button on the left side on the left panel of the web page and then June 2011. New films include the latest Action, Suspense and Science Fiction film hits, general drama movies including the Oscar-winning The King’s Speech, comedies including both chapter of Bridget Jones’s Diary, seven films for children and a musical. Other highlights include the latest Harry Potter release and some movies from the past you may have missed including the first in the Terminator series. New CDs include the latest releases by Michel Sardou, Mylene Farmer, Jennifer Lopez, Zucchero and Britney Spears. There is also a hits collection from NRJ. Don’t forget that the Club is now open every Monday, Wednesday and Friday lunchtimes from 12h30 to 13h00 in Restaurant 2, Building 504. (C...

  4. Record club

    CERN Multimedia

    Record club

    2010-01-01

      Bonjour a tous, Voici les 24 nouveaux DVD de Juillet disponibles depuis quelques jours, sans oublier les 5 CD Pop musique. Découvrez la saga du terroriste Carlos, la vie de Gainsbourg et les aventures de Lucky Luke; angoissez avec Paranormal Activity et évadez vous sur Pandora dans la peau d’Avatar. Toutes les nouveautés sont à découvrir directement au club. Pour en connaître la liste complète ainsi que le reste de la collection du Record Club, nous vous invitons sur notre site web: http://cern.ch/crc. Toutes les dernières nouveautés sont dans la rubrique « Discs of the Month ». Rappel : le club est ouvert les Lundis, Mercredis, Vendredis de 12h30 à 13h00 au restaurant n°2, bâtiment 504. A bientôt chers Record Clubbers.  

  5. Record Club

    CERN Multimedia

    Record Club

    2011-01-01

    http://cern.ch/Record.Club November  Selections Just in time for the holiday season, we have added a number of new CDs and DVDs into the Club. You will find the full lists at http://cern.ch/record.club; select the "Discs of the Month" button on the left side on the left panel of the web page and then Nov 2011. New films include the all 5 episodes of Fast and Furious, many of the most famous films starring Jean-Paul Belmondo and those of Louis de Funes and some more recent films such as The Lincoln Lawyer and, according to some critics, Woody Allen’s best film for years – Midnight in Paris. For the younger generation there is Cars 2 and Kung Fu Panda 2. New CDs include the latest releases by Adele, Coldplay and the Red Hot Chili Peppers. We have also added the new Duets II CD featuring Tony Bennett singing with some of today’s pop stars including Lady Gaga, Amy Winehouse and Willy Nelson. The Club is now open every Monday, Wednesday and Friday ...

  6. Patterning of Structurally Anisotropic Composite Hydrogel Sheets.

    Science.gov (United States)

    Prince, Elisabeth; Alizadehgiashi, Moien; Campbell, Melissa; Khuu, Nancy; Albulescu, Alexandra; De France, Kevin; Ratkov, Dimitrije; Li, Yunfeng; Hoare, Todd; Kumacheva, Eugenia

    2018-04-09

    Compositional and structural patterns play a crucial role in the function of many biological tissues. In the present work, for nanofibrillar hydrogels formed by chemically cross-linked cellulose nanocrystals (CNC) and gelatin, we report a microextrusion-based 3D printing method to generate structurally anisotropic hydrogel sheets with CNCs aligned in the direction of extrusion. We prepared hydrogels with a uniform composition, as well as hydrogels with two different types of compositional gradients. In the first type of gradient hydrogel, the composition of the sheet varied parallel to the direction of CNC alignment. In the second hydrogel type, the composition of the sheet changed orthogonally to the direction of CNC alignment. The hydrogels exhibited gradients in structure, mechanical properties, and permeability, all governed by the compositional patterns, as well as cytocompatibility. These hydrogels have promising applications for both fundamental research and for tissue engineering and regenerative medicine.

  7. Dipole-sheet multipole magnets for accelerators

    International Nuclear Information System (INIS)

    Walstrom, P.L.

    1993-01-01

    The dipole-sheet formalism can be used to describe both cylindrical current-sheet multipole magnets and cylindrical-bore magnets made up of permanent magnet blocks. For current sheets, the formalism provides a natural way of finding a finite set of turns that approximate a continuous distribution. The formalism is especially useful In accelerator applications where large-bore, short, high-field-quality magnets that are dominated by fringe fields are needed. A further advantage of the approach is that in systems with either open or cylindrically symmetric magnetic boundaries, analytical expressions for the three-dimensional fields that are suitable for rapid numerical evaluation can be derived. This development is described in some detail. Also, recent developments in higher-order particle-beam optics codes based on the formalism are described briefly

  8. Symmetry breaking bifurcations of a current sheet

    International Nuclear Information System (INIS)

    Parker, R.D.; Dewar, R.L.; Johnson, J.L.

    1988-08-01

    Using a time evolution code with periodic boundary conditions, the viscoresistive hydromagnetic equations describing an initially static, planar current sheet with large Lundquist number have been evolved for times long enough to reach a steady state. A cosh 2 x resistivity model was used. For long periodicity lengths, L p , the resistivity gradient drives flows which cause forced reconnection at X point current sheets. Using L p as a bifurcation parameter, two new symmetry breaking bifurcations were found - a transition to an asymmetric island chain with nonzero, positive or negative phase velocity, and a transition to a static state with alternating large and small islands. These states are reached after a complex transient behavior which involves a competition between secondary current sheet instability and coalescence. 31 refs., 6 figs

  9. Continuous liquid sheet generator for ion stripping

    International Nuclear Information System (INIS)

    Gavin, B.; Batson, P.; Leemann, B.; Rude, B.

    1984-10-01

    Many of the technical problems of generating a large thin liquid sheet from 0.02 to 0.20 μm thick (3 to 40 μgm/cm 2 ) have been solved. It is shown that this perennial sheet is stable and consonant in dimension. Several ion beam species from the SuperHILAC have been used for evaluation; at 0.11 MeV/n. In one of three modes this sheet serves as an equivalent substitute for a carbon foil. The second mode is characterized by a solid-like charge state distribution but with a varying fraction of unstripped ions. The third mode gives stripping performance akin to a vapor stripping medium. 9 references, 7 figures

  10. Evolution of the MHD sheet pinch

    International Nuclear Information System (INIS)

    Matthaeus, W.H.; Montgomery, D.

    1979-01-01

    A magnetohydrodynamic (MHD) problem of recurrent interest for both astrophysical and laboratory plasmas is the evolution of the unstable sheet pinch, a current sheet across which a dc magnetic field reverses sign. The evolution of such a sheet pinch is followed with a spectral-method, incompressible, two-dimensional, MHD turbulence code. Spectral diagnostics are employed, as are contour plots of vector potential (magnetic field lines), electric current density, and velocity stream function (velocity streamlines). The nonlinear effect which seems most important is seen to be current filamentation: the concentration of the current density onto sets of small measure near a mgnetic X point. A great deal of turbulence is apparent in the current distribution, which, for high Reynolds numbers, requires large spatial grids (greater than or equal to (64) 2 ). 11 figures, 1 table

  11. Dating Antarctic ice sheet collapse: Proposing a molecular genetic approach

    Science.gov (United States)

    Strugnell, Jan M.; Pedro, Joel B.; Wilson, Nerida G.

    2018-01-01

    Sea levels at the end of this century are projected to be 0.26-0.98 m higher than today. The upper end of this range, and even higher estimates, cannot be ruled out because of major uncertainties in the dynamic response of polar ice sheets to a warming climate. Here, we propose an ecological genetics approach that can provide insight into the past stability and configuration of the West Antarctic Ice Sheet (WAIS). We propose independent testing of the hypothesis that a trans-Antarctic seaway occurred at the last interglacial. Examination of the genomic signatures of bottom-dwelling marine species using the latest methods can provide an independent window into the integrity of the WAIS more than 100,000 years ago. Periods of connectivity facilitated by trans-Antarctic seaways could be revealed by dating coalescent events recorded in DNA. These methods allow alternative scenarios to be tested against a fit to genomic data. Ideal candidate taxa for this work would need to possess a circumpolar distribution, a benthic habitat, and some level of genetic structure indicated by phylogeographical investigation. The purpose of this perspective piece is to set out an ecological genetics method to help resolve when the West Antarctic Ice Shelf last collapsed.

  12. Tertiary ice sheet dynamics: The Snow Gun Hypothesis

    Science.gov (United States)

    Prentice, M. L.; Matthews, R. K.

    1991-04-01

    We observe strong negative correlation between Tertiary low- to mid-latitude planktonic foraminiferal δ18O and the difference between these data and coeval benthic foraminiferal δ18O. Late Quaternary data do not show this correlation. Coupling statistical model/δ18O comparisons and evidence for Antarctic ice and ocean temperature variation, we infer that Tertiary ice volume, recorded by tropical planktonic δ18O, increased as the deep ocean warmed. Because the isotopic signatures of deepwater temperature variation and ice volume change were of opposite sign, the sum of these signals in Tertiary benthic δ18O became lost in the noise. This renders low correlation between Tertiary planktonic and benthic δ18O time series compared to late Quaternary data. We contend that Tertiary ice sheet growth was commonly driven by warming of deep water from low- to mid-latitude marginal seas (snow gun hypothesis). In contrast, late Quaternary ice sheets grew as deep water, formed at high latitude, cooled. Because tectonic forcing and orbital forcing at low-latitude primarily controlled production and temperature variations of this Warm Saline Deep Water, these influences largely dictated Tertiary ice volume fluctuations. Through the Tertiary, we infer ice volume fluctuations to be an important component of sea level history on timescales between 103 and 107 years.

  13. Antarctic ice sheet thickness estimation using the horizontal-to-vertical spectral ratio method with single-station seismic ambient noise

    Science.gov (United States)

    Yan, Peng; Li, Zhiwei; Li, Fei; Yang, Yuande; Hao, Weifeng; Bao, Feng

    2018-03-01

    We report on a successful application of the horizontal-to-vertical spectral ratio (H / V) method, generally used to investigate the subsurface velocity structures of the shallow crust, to estimate the Antarctic ice sheet thickness for the first time. Using three-component, five-day long, seismic ambient noise records gathered from more than 60 temporary seismic stations located on the Antarctic ice sheet, the ice thickness measured at each station has comparable accuracy to the Bedmap2 database. Preliminary analysis revealed that 60 out of 65 seismic stations on the ice sheet obtained clear peak frequencies (f0) related to the ice sheet thickness in the H / V spectrum. Thus, assuming that the isotropic ice layer lies atop a high velocity half-space bedrock, the ice sheet thickness can be calculated by a simple approximation formula. About half of the calculated ice sheet thicknesses were consistent with the Bedmap2 ice thickness values. To further improve the reliability of ice thickness measurements, two-type models were built to fit the observed H / V spectrum through non-linear inversion. The two-type models represent the isotropic structures of single- and two-layer ice sheets, and the latter depicts the non-uniform, layered characteristics of the ice sheet widely distributed in Antarctica. The inversion results suggest that the ice thicknesses derived from the two-layer ice models were in good concurrence with the Bedmap2 ice thickness database, and that ice thickness differences between the two were within 300 m at almost all stations. Our results support previous finding that the Antarctic ice sheet is stratified. Extensive data processing indicates that the time length of seismic ambient noise records can be shortened to two hours for reliable ice sheet thickness estimation using the H / V method. This study extends the application fields of the H / V method and provides an effective and independent way to measure ice sheet thickness in Antarctica.

  14. W-Band Sheet Beam Klystron Design

    International Nuclear Information System (INIS)

    Scheitrum, G.; Caryotakis, G.; Burke, A.; Jensen, A.; Jongewaard, E.; Krasnykh, A.; Neubauer, M.; Phillips, R.; Rauenbuehler, K.

    2011-01-01

    Sheet beam devices provide important advantages for very high power, narrow bandwidth RF sources like accelerator klystrons (1). Reduced current density and increased surface area result in increased power capabi1ity, reduced magnetic fields for focusing and reduced cathode loading. These advantages are offset by increased complexity, beam formation and transport issues and potential for mode competition in the ovennoded cavities and drift tube. This paper will describe the design issues encountered in developing a 100 kW peak and 2 kW average power sheet beam k1ystron at W-band including beam formation, beam transport, circuit design, circuit fabrication and mode competition.

  15. Assembly for testing weldability of sheet metal

    Science.gov (United States)

    David, S.A.; Woodhouse, J.J.

    A test assembly for determining the weldability of sheet metal includes (1) a circular plate having an annular groove in one side thereof, a counterbore being formed in the outer wall of said groove and the surface portion of said base circumscribed by the inner wall of said groove being coplanar with the bottom of said counterbore, (2) a test disk of sheet metal the periphery of which is positioned in said counterbore and the outer surface of which is coplanar with said one side of said base, and (3) means for holding the periphery of said test disk against the bottom of said counterbore.

  16. Balance Sheet Capacity and Endogenous Risk

    OpenAIRE

    Jon Danielsson; Hyun Song Shin; Jean-Pierre Zigrand

    2011-01-01

    Banks operating under Value-at-Risk constraints give rise to a well-defined aggregate balance sheet capacity for the banking sector as a whole that depends on total bank capital. Equilibrium risk and market risk premiums can be solved in closed form as functions of aggregate bank capital. We explore the empirical properties of the model in light of recent experience in the financial crisis and highlight the importance of balance sheet capacity as the driver of the financial cycle and market r...

  17. Balance Velocities of the Greenland Ice Sheet

    Science.gov (United States)

    Joughin, Ian; Fahnestock, Mark; Ekholm, Simon; Kwok, Ron

    1997-01-01

    We present a map of balance velocities for the Greenland ice sheet. The resolution of the underlying DEM, which was derived primarily from radar altimetry data, yields far greater detail than earlier balance velocity estimates for Greenland. The velocity contours reveal in striking detail the location of an ice stream in northeastern Greenland, which was only recently discovered using satellite imagery. Enhanced flow associated with all of the major outlets is clearly visible, although small errors in the source data result in less accurate estimates of the absolute flow speeds. Nevertheless, the balance map is useful for ice-sheet modelling, mass balance studies, and field planning.

  18. RECORD CLUB

    CERN Multimedia

    Record Club

    2010-01-01

    DVD James Bond – Series Complete To all Record Club Members, to start the new year, we have taken advantage of a special offer to add copies of all the James Bond movies to date, from the very first - Dr. No - to the latest - Quantum of Solace. No matter which of the successive 007s you prefer (Sean Connery, George Lazenby, Roger Moore, Timothy Dalton, Pierce Brosnan or Daniel Craig), they are all there. Or perhaps you have a favourite Bond Girl, or even perhaps a favourite villain. Take your pick. You can find the full selection listed on the club web site http://cern.ch/crc; use the panel on the left of the page “Discs of the Month” and select Jan 2010. We remind you that we are open on Mondays, Wednesdays and Fridays from 12:30 to 13:00 in Restaurant 2 (Bldg 504).

  19. Record breakers

    CERN Multimedia

    Antonella Del Rosso

    2012-01-01

    In the sixties, CERN’s Fellows were but a handful of about 50 young experimentalists present on site to complete their training. Today, their number has increased to a record-breaking 500. They come from many different fields and are spread across CERN’s different activity areas.   “Diversifying the Fellowship programme has been the key theme in recent years,” comments James Purvis, Head of the Recruitment, Programmes and Monitoring group in the HR Department. “In particular, the 2005 five-yearly review introduced the notion of ‘senior’ and ‘junior’ Fellowships, broadening the target audience to include those with Bachelor-level qualifications.” Diversification made CERN’s Fellowship programme attractive to a wider audience but the number of Fellows on site could not have increased so much without the support of EU-funded projects, which were instrumental in the growth of the programme. ...

  20. Relation between current sheets and vortex sheets in stationary incompressible MHD

    Directory of Open Access Journals (Sweden)

    D. H. Nickeler

    2012-03-01

    Full Text Available Magnetohydrodynamic configurations with strong localized current concentrations and vortices play an important role in the dissipation of energy in space and astrophysical plasma. Within this work we investigate the relation between current sheets and vortex sheets in incompressible, stationary equilibria. For this approach it is helpful that the similar mathematical structure of magnetohydrostatics and stationary incompressible hydrodynamics allows us to transform static equilibria into stationary ones. The main control function for such a transformation is the profile of the Alfvén-Mach number MA, which is always constant along magnetic field lines, but can change from one field line to another. In the case of a global constant MA, vortices and electric current concentrations are parallel. More interesting is the nonlinear case, where MA varies perpendicular to the field lines. This is a typical situation at boundary layers like the magnetopause, heliopause, the solar wind flowing around helmet streamers and at the boundary of solar coronal holes. The corresponding current and vortex sheets show in some cases also an alignment, but not in every case. For special density distributions in 2-D, it is possible to have current but no vortex sheets. In 2-D, vortex sheets of field aligned-flows can also exist without strong current sheets, taking the limit of small Alfvén Mach numbers into account. The current sheet can vanish if the Alfvén Mach number is (almost constant and the density gradient is large across some boundary layer. It should be emphasized that the used theory is not only valid for small Alfvén Mach numbers MA MA ≲ 1. Connection to other theoretical approaches and observations and physical effects in space plasmas are presented. Differences in the various aspects of theoretical investigations of current sheets and vortex sheets are given.

  1. Laminin-521 Promotes Rat Bone Marrow Mesenchymal Stem Cell Sheet Formation on Light-Induced Cell Sheet Technology

    Directory of Open Access Journals (Sweden)

    Zhiwei Jiang

    2017-01-01

    Full Text Available Rat bone marrow mesenchymal stem cell sheets (rBMSC sheets are attractive for cell-based tissue engineering. However, methods of culturing rBMSC sheets are critically limited. In order to obtain intact rBMSC sheets, a light-induced cell sheet method was used in this study. TiO2 nanodot films were coated with (TL or without (TN laminin-521. We investigated the effects of laminin-521 on rBMSCs during cell sheet culturing. The fabricated rBMSC sheets were subsequently assessed to study cell sheet viability, reattachment ability, cell sheet thickness, collagen type I deposition, and multilineage potential. The results showed that laminin-521 could promote the formation of rBMSC sheets with good viability under hyperconfluent conditions. Cell sheet thickness increased from an initial 26.7 ± 1.5 μm (day 5 up to 47.7 ± 3.0 μm (day 10. Moreover, rBMSC sheets maintained their potential of osteogenic, adipogenic, and chondrogenic differentiation. This study provides a new strategy to obtain rBMSC sheets using light-induced cell sheet technology.

  2. Records Control Schedules Repository

    Data.gov (United States)

    National Archives and Records Administration — The Records Control Schedules (RCS) repository provides access to scanned versions of records schedules, or Standard Form 115, Request for Records Disposition...

  3. Nuclear Data Sheets for A=213

    International Nuclear Information System (INIS)

    Basunia, M.S.

    2007-01-01

    Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for all nuclei with mass number A=213. This evaluation for A=213 supersedes the earlier one by Y. A. Akovali (1992Ak01), published in Nuclear Data Sheets 66, 237 (1992)

  4. Solar Technical Assistance Team (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-07-01

    The Solar Technical Assistance Team (STAT) is a team of solar technology and deployment experts who ensure that the best information on policies, regulations, financing, and other issues is getting into the hands of state government decision makers whey they need it. This fact sheet provides information about STAT and the STAT webinar series for the summer of 2012.

  5. TSCA Chemical Data Reporting Fact Sheet: Articles

    Science.gov (United States)

    This fact sheet provides guidance on classifying articles under the Toxic Substances Control Act (TSCA) and determining the applicability of EPA’s articles exclusion policy for purposes of the Chemical Data Reporting (CDR) rule. The primary goal of this document is to help the regulated community comply with the requirements of the CDR rule.

  6. Nuclear Data Sheets for A=213

    Energy Technology Data Exchange (ETDEWEB)

    Basunia, M. S.

    2007-03-01

    Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for all nuclei with mass number A=213. This evaluation for A=213 supersedes the earlier one by Y. A. Akovali (1992Ak01), published in Nuclear Data Sheets 66, 237 (1992).

  7. Renewable Energy Project Development Assistance (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-07-01

    This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

  8. Recent Progress in Greenland Ice Sheet Modelling

    NARCIS (Netherlands)

    Goelzer, Heiko; Robinson, Alexander; Seroussi, Helene; Van De Wal, Roderik S.w.

    2017-01-01

    Purpose of Review This paper reviews the recent literature on numerical modelling of the dynamics of the Greenland ice sheet with the goal of providing an overview of advancements and to highlight important directions of future research. In particular, the review is focused on large-scale modelling

  9. Sheet Membrane Spacesuit Water Membrane Evaporator

    Science.gov (United States)

    Bue, Grant; Trevino, Luis; Zapata, Felipe; Dillion, Paul; Castillo, Juan; Vonau, Walter; Wilkes, Robert; Vogel, Matthew; Frodge, Curtis

    2013-01-01

    A document describes a sheet membrane spacesuit water membrane evaporator (SWME), which allows for the use of one common water tank that can supply cooling water to the astronaut and to the evaporator. Test data showed that heat rejection performance dropped only 6 percent after being subjected to highly contaminated water. It also exhibited robustness with respect to freezing and Martian atmospheric simulation testing. Water was allowed to freeze in the water channels during testing that simulated a water loop failure and vapor backpressure valve failure. Upon closing the backpressure valve and energizing the pump, the ice eventually thawed and water began to flow with no apparent damage to the sheet membrane. The membrane evaporator also serves to de-gas the water loop from entrained gases, thereby eliminating the need for special degassing equipment such as is needed by the current spacesuit system. As water flows through the three annular water channels, water evaporates with the vapor flowing across the hydrophobic, porous sheet membrane to the vacuum side of the membrane. The rate at which water evaporates, and therefore, the rate at which the flowing water is cooled, is a function of the difference between the water saturation pressure on the water side of the membrane, and the pressure on the vacuum side of the membrane. The primary theory is that the hydrophobic sheet membrane retains water, but permits vapor pass-through when the vapor side pressure is less than the water saturation pressure. This results in evaporative cooling of the remaining water.

  10. World War II Informational Fact Sheets.

    Science.gov (United States)

    Department of Defense, Washington, DC.

    This commemorative book provides numerous fact sheets on various aspects of World War II, both on the fighting front and the homefront. Replicas of posters of the war era, descriptions of battles with maps, contributions of women and minorities to the war effort, even music of the wartime era, add to this collection of resource materials useful to…

  11. Full size testing of sheet pile walls

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de; Linden, M.L.R. van der; Katsma, H.; Stolle, P.

    1996-01-01

    Azobé (Lophira alata) is widely used in timber sheet pile walls in the Netherlands. The boards in these walls are coupled and therefore load-sharing can be expected. A simulation model based on the finite element method DIANA (DIANA, 1992) was developed and load-sharing could be calculated. To check

  12. Greenland ice sheet mass balance: a review

    DEFF Research Database (Denmark)

    Khan, Shfaqat Abbas; Aschwanden, Andy; Bjørk, Anders A.

    2015-01-01

    Over the past quarter of a century the Arctic has warmed more than any other region on Earth, causing a profound impact on the Greenland ice sheet (GrIS) and its contribution to the rise in global sea level. The loss of ice can be partitioned into processes related to surface mass balance...... realistic future sea-level changes....

  13. The state of the Greenland Ice Sheet

    DEFF Research Database (Denmark)

    Simonsen, Sebastian Bjerregaard

    Firn is defined as snow that has survived a melt season and provides the link between the high-frequency variability of the atmosphere to the ”slower” reacting ice sheet.In this thesis, firn is described by a theoretical and statistical approach to accommodate the variability in observed firn...

  14. Electronic properties of curved graphene sheets

    OpenAIRE

    Cortijo, Alberto; Vozmediano, Maria A. H.

    2006-01-01

    A model is proposed to study the electronic structure of slightly curved graphene sheets with an arbitrary number of pentagon-heptagon pairs and Stone-Wales defects based on a cosmological analogy. The disorder induced by curvature produces characteristic patterns in the local density of states that can be observed in scanning tunnel and transmission electron microscopy.

  15. Warm Deep Drawing of Aluminium Sheet

    NARCIS (Netherlands)

    Bolt, P.J.; Werkhoven, R.J.; van den Boogaard, Antonius H.

    2003-01-01

    Aluminium sheet drawing processes can be improved by manipulating local flow behaviour by means of elevated temperatures and temperature gradients in the tooling. Forming tests showed that a substantial improvement is possible not only for 5xxx but also for 6xxx series alloys. Finite element method

  16. Lubricant failure in sheet metal forming processes

    NARCIS (Netherlands)

    van der Heide, Emile

    2002-01-01

    The application of tribology to sheet metal forming processes (SMF) contributes to a general industrial aim i.e., to make products of high quality at an increasingly competitive way, by enhancing the tool life and maintaining a constant level of friction during forming. Both aspects are served by

  17. Geometry task sheets : grades 3-5

    CERN Document Server

    Rosenberg, Mary

    2009-01-01

    For grades 3-5, our Common Core State Standards-based resource meets the geometry concepts addressed by the NCTM standards and encourages the students to learn and review the concepts in unique ways. Each task sheet is organized around a central problem taken from real-life experiences of the students.

  18. Algebra task sheets : grades pk-2

    CERN Document Server

    Reed, Nat

    2009-01-01

    For grades PK-2, our Common Core State Standards-based resource meets the algebraic concepts addressed by the NCTM standards and encourages the students to learn and review the concepts in unique ways. Each task sheet is organized around a central problem taken from real-life experiences of the students.

  19. Geometry task sheets : grades pk-2

    CERN Document Server

    Rosenberg, Mary

    2009-01-01

    For grades PK-2, our Common Core State Standards-based resource meets the geometry concepts addressed by the NCTM standards and encourages the students to learn and review the concepts in unique ways. Each task sheet is organized around a central problem taken from real-life experiences of the students.

  20. beta-sheet preferences from first principles

    DEFF Research Database (Denmark)

    Rossmeisl, Jan; Bækgaard, Iben Sig Buur; Gregersen, Misha Marie

    2003-01-01

    The natural amino acids have different preferences of occurring in specific types of secondary protein structure. Simulations are performed on periodic model â-sheets of 14 different amino acids, at the level of density functional theory, employing the generalized gradient approximation. We find ...

  1. The stretch zone of automotive steel sheets

    Indian Academy of Sciences (India)

    on steel grade, on the rolling direction as well as on the loading rate. Stretch zones ... This interaction is demonstrated at a fracture surface as a bounded transition between initiatory crack (e.g., fatigue) and either ... The materials examined in this study are three grades of thin automotive steel sheets: XSG,. HR 45 and DP.

  2. French electric power balance sheet 2007

    International Nuclear Information System (INIS)

    Lartigau, Thierry; Pierron, Helene

    2008-01-01

    The mission of RTE, the French electricity Transportation grid, a public service assignment, is to balance the electricity supply and demand in real time. This report presents RTE's technical results for the year 2007: key figures of the electricity balance sheet, progresses in the implementation of market mechanisms, durable rise of RTE's investment, and RTE's commitment in sustainable development

  3. Pelvic Inflammatory Disease (PID) Fact Sheet

    Science.gov (United States)

    ... Search Form Controls Cancel Submit Search the CDC Pelvic Inflammatory Disease (PID) Note: Javascript is disabled or is not supported ... Twitter STD on Facebook Sexually Transmitted Diseases (STDs) Pelvic Inflammatory Disease (PID) - CDC Fact Sheet Language: English (US) Español ( ...

  4. Pure niobium sheet formability limits hydroforming

    International Nuclear Information System (INIS)

    Collard, J.; Daumas, M.T.

    1986-04-01

    Sheets of niobium of 3 different thicknesses (0.1 mm, 1 mm and 2 mm) are deep-drawn by isostatic forming, influence of plane anisotropy and thickness are studied and deformation of the hydroformed niobium is observed. Forming limit curves are determined [fr

  5. Guided bone regeneration using individualized ceramic sheets.

    Science.gov (United States)

    Malmström, J; Anderud, J; Abrahamsson, P; Wälivaara, D-Å; Isaksson, S G; Adolfsson, E

    2016-10-01

    Guided bone regeneration (GBR) describes the use of membranes to regenerate bony defects. A membrane for GBR needs to be biocompatible, cell-occlusive, non-toxic, and mouldable, and possess space-maintaining properties including stability. The purpose of this pilot study was to describe a new method of GBR using individualized ceramic sheets to perfect bone regeneration prior to implant placement; bone regeneration was assessed using traditional histology and three-dimensional (3D) volumetric changes in the bone and soft tissue. Three patients were included. After full-thickness flap reflection, the individualized ceramic sheets were fixed. The sites were left to heal for 7 months. All patients were evaluated preoperatively and at 7 months postoperative using cone beam computed tomography and 3D optical equipment. Samples of the regenerated bone and soft tissue were collected and analyzed. The bone regenerated in the entire interior volume of all sheets. Bone biopsies revealed newly formed trabecular bone with a lamellar structure. Soft tissue biopsies showed connective tissue with no signs of an inflammatory response. This was considered to be newly formed periosteum. Thus ceramic individualized sheets can be used to regenerate large volumes of bone in both vertical and horizontal directions independent of the bone defect and with good biological acceptance of the material. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  6. Global thermodynamics of a polar ice sheet

    NARCIS (Netherlands)

    Veen, C.J. van der; Oerlemans, J.

    1984-01-01

    In this paper, the global characteristics of a polar ice sheet are investigated. When looking at a drainage system as a whole, conservation of heat yields a very simple functional relation. Coupling this relation to an equation describing the large-scale dynamics of a drainage system makes it

  7. Laboratory Powder Metallurgy Makes Tough Aluminum Sheet

    Science.gov (United States)

    Royster, D. M.; Thomas, J. R.; Singleton, O. R.

    1993-01-01

    Aluminum alloy sheet exhibits high tensile and Kahn tear strengths. Rapid solidification of aluminum alloys in powder form and subsequent consolidation and fabrication processes used to tailor parts made of these alloys to satisfy such specific aerospace design requirements as high strength and toughness.

  8. Validation and Design of Sheet Retrofits

    Science.gov (United States)

    2010-10-31

    optimum for utilizing the entire strength of the polypropylene sheet. The amount of bolts used to provide the sample fixity may also be impractical for...consists of fixity , where the top and bottom sections of the wall are prevented from rotation until failure of the wall. With this boundary condition

  9. Chemical Data Reporting Fact Sheet: Basic Information

    Science.gov (United States)

    EPA collects information on the types and quantities of chemicals produced in the U.S under the Chemical Data Reporting (CDR) requirements. This fact sheet outlines key information about CDR, including what data are collected and how the data are used.

  10. Chemical Data Reporting Fact Sheet: Chemicals Snapshot

    Science.gov (United States)

    This fact sheet provides a brief overview of the chemical manufacturing, processing, and use information collected for the 2012 Chemical Data Reporting (CDR) rule. Users do not have access to the complete CDR data set and should draw conclusions with care.

  11. Fatigue Specimens for Sheet and Plate Material

    NARCIS (Netherlands)

    Schijve, J.

    1998-01-01

    The usefulness of simple sheet and plate specimens is discussed for various experimental research purposes. Specimens should be representative as much as possible for the conditions of fatigue problems in practice, which is more difficult to achieve for the fatigue crack initiation phase than for

  12. Record Club

    CERN Multimedia

    Record Club

    2012-01-01

      March  Selections By the time this appears, we will have added a number of new CDs and DVDs into the Club. You will find the full lists at http://cern.ch/record.club; select the "Discs of the Month" button on the left panel of the web page and then Mar 2012. New films include recent releases such as Johnny English 2, Bad Teacher, Cowboys vs Aliens, and Super 8. We are also starting to acquire some of the classic films we missed when we initiated the DVD section of the club, such as appeared in a recent Best 100 Films published by a leading UK magazine; this month we have added Spielberg’s Jaws and Scorsese’s Goodfellas. If you have your own ideas on what we are missing, let us know. For children we have no less than 8 Tin-Tin DVDs. And if you like fast moving pop music, try the Beyonce concert DVD. New CDs include the latest releases from Paul McCartney, Rihanna and Amy Winehouse. There is a best of Mylene Farmer, a compilation from the NRJ 201...

  13. Strengthening Interprofessional Requirements Engineering Through Action Sheets: A Pilot Study.

    Science.gov (United States)

    Kunz, Aline; Pohlmann, Sabrina; Heinze, Oliver; Brandner, Antje; Reiß, Christina; Kamradt, Martina; Szecsenyi, Joachim; Ose, Dominik

    2016-10-18

    The importance of information and communication technology for healthcare is steadily growing. Newly developed tools are addressing different user groups: physicians, other health care professionals, social workers, patients, and family members. Since often many different actors with different expertise and perspectives are involved in the development process it can be a challenge to integrate the user-reported requirements of those heterogeneous user groups. Nevertheless, the understanding and consideration of user requirements is the prerequisite of building a feasible technical solution. In the course of the presented project it proved to be difficult to gain clear action steps and priorities for the development process out of the primary requirements compilation. Even if a regular exchange between involved teams took place there was a lack of a common language. The objective of this paper is to show how the already existing requirements catalog was subdivided into specific, prioritized, and coherent working packages and the cooperation of multiple interprofessional teams within one development project was reorganized at the same time. In the case presented, the manner of cooperation was reorganized and a new instrument called an Action Sheet was implemented. This paper introduces the newly developed methodology which was meant to smooth the development of a user-centered software product and to restructure interprofessional cooperation. There were 10 focus groups in which views of patients with colorectal cancer, physicians, and other health care professionals were collected in order to create a requirements catalog for developing a personal electronic health record. Data were audio- and videotaped, transcribed verbatim, and thematically analyzed. Afterwards, the requirements catalog was reorganized in the form of Action Sheets which supported the interprofessional cooperation referring to the development process of a personal electronic health record for the

  14. The Last Interglacial History of the Antarctic Ice sheet

    Science.gov (United States)

    Bradley, Sarah; Siddall, Mark; Milne, Glenn A.; Masson-Delmotte, Valerie; Wolff, Eric; Hindmarsh, Richard C. A.

    2014-05-01

    In this paper we present a summary of the work which was conducted as part of the 'PAST4FUTURE -WP4.1: Sea Level and Ice sheets' project. The overall aim of this study was to understand the response of the Antarctic Ice sheet (AIS) to climate forcing during the Last interglacial (LIG) and its contribution to the observed higher than present sea level during this period. The study involved the application and development of a novel technique which combined East Antarctic stable isotope ice core data with the output from a Glacial Isostatic Adjustment (GIA) model [Bradley et al., 2012]. We investigated if the stable isotope ice core data are sensitive to detecting isostatically driven changes in the surface elevation driven by changes in the ice-loading history of the AIS and if so, could we address some key questions relating to the LIG history of the AIS. Although it is believed that the West Antarctic Ice sheet (WAIS) reduced in size during the LIG compared to the Holocene, major uncertainties and unknowns remain unresolved: Did the WAIS collapse? What would the contribution of such a collapse be the higher than present LIG eustatic sea level (ESL)? We will show that a simulated collapse of the WAIS does not generate a significant elevation driven signal at the EAIS LIG ice core sites, and as such, these ice core records cannot be used to assess WAIS stability over this period. However, we will present 'treasure maps' [Bradley et al., 2012] to identify regions of the AIS where results from geological studies and/or new paleoclimate data may be sensitive to detecting a WAIS collapse. These maps can act as a useful tool for the wider science community/field scientists as a guide to highlight sites suitable to constrain the evolution of the WAIS during the LIG. Studies have proposed that the surface temperature across the East Antarctic Ice Sheet (EAIS) was significantly warmer, 2-5°C during the LIG compared to present [Lang and Wolff, 2011]. These higher

  15. Exposure age and ice-sheet model constraints on Pliocene East Antarctic ice sheet dynamics.

    Science.gov (United States)

    Yamane, Masako; Yokoyama, Yusuke; Abe-Ouchi, Ayako; Obrochta, Stephen; Saito, Fuyuki; Moriwaki, Kiichi; Matsuzaki, Hiroyuki

    2015-04-24

    The Late Pliocene epoch is a potential analogue for future climate in a warming world. Here we reconstruct Plio-Pleistocene East Antarctic Ice Sheet (EAIS) variability using cosmogenic nuclide exposure ages and model simulations to better understand ice sheet behaviour under such warm conditions. New and previously published exposure ages indicate interior-thickening during the Pliocene. An ice sheet model with mid-Pliocene boundary conditions also results in interior thickening and suggests that both the Wilkes Subglacial and Aurora Basins largely melted, offsetting increased ice volume. Considering contributions from West Antarctica and Greenland, this is consistent with the most recent IPCC AR5 estimate, which indicates that the Pliocene sea level likely did not exceed +20 m on Milankovitch timescales. The inception of colder climate since ∼3 Myr has increased the sea ice cover and inhibited active moisture transport to Antarctica, resulting in reduced ice sheet thickness, at least in coastal areas.

  16. Cosmogenic nuclide age estimate for Laurentide Ice Sheet recession from the terminal moraine, New Jersey, USA, and constraints on latest Pleistocene ice sheet history

    Science.gov (United States)

    Corbett, Lee B.; Bierman, Paul R.; Stone, Byron D.; Caffee, Marc W.; Larsen, Patrick L.

    2017-01-01

    The time at which the Laurentide Ice Sheet reached its maximum extent and subsequently retreated from its terminal moraine in New Jersey has been constrained by bracketing radiocarbon ages on preglacial and postglacial sediments. Here, we present measurements of in situ produced 10Be and 26Al in 16 quartz-bearing samples collected from bedrock outcrops and glacial erratics just north of the terminal moraine in north-central New Jersey; as such, our ages represent a minimum limit on the timing of ice recession from the moraine. The data set includes field and laboratory replicates, as well as replication of the entire data set five years after initial measurement. We find that recession of the Laurentide Ice Sheet from the terminal moraine in New Jersey began before 25.2±2.1 ka (10Be, n=16, average, 1 standard deviation). This cosmogenic nuclide exposure age is consistent with existing limiting radiocarbon ages in the study area and cosmogenic nuclide exposure ages from the terminal moraine on Martha’s Vineyard ~300 km to the northeast. The age we propose for Laurentide Ice Sheet retreat from the New Jersey terminal position is broadly consistent with regional and global climate records of the last glacial maximum termination and records of fluvial incision.

  17. Semiconductor Manufacturing Final Air Toxics Rules Fact Sheets

    Science.gov (United States)

    This page contains a February 2003 fact sheet for the final NESHAP for Semiconductor Manufacturing. This page also contains a July 2008 fact sheet with information regarding the final amendments to the 2003 final rule for the NESHAP.

  18. Drinking Water Fact Sheet: Drinking Water Treatment Systems

    OpenAIRE

    Mesner, Nancy; Daniels, Barbara

    2010-01-01

    This fact sheet provides information about drinking water treatment systems. This fact sheet discusses different types of water treatment systems available to homeowners. It includes a table with water contaminants or problems, possible causes of the problem, and solutions.

  19. A Case Study and Balance Sheet Approach to Unemployment.

    Science.gov (United States)

    Hesketh, Beryl; And Others

    1987-01-01

    Describes positive and negative aspects of employment and unemployment in a balance sheet framework. Discusses the value of the balance sheet approach in understanding individual differences in reactions to unemployment. (Author/KS)

  20. Millennial-scale interaction between ice sheets and ocean circulation during marine isotope stage 100

    Directory of Open Access Journals (Sweden)

    Masao eOhno

    2016-05-01

    Full Text Available Waxing/waning of the ice sheets and the associated change in thermohaline circulation have played an important role in global climate change since major continental ice sheets appeared in the northern hemisphere about 2.75 million years ago. In the earliest glacial stages, however, establishment of the linkage between ice sheet development and ocean circulation remain largely unclear. Here we show new high-resolution records of marine isotope stage 100 recovered from deep-sea sediments on the Gardar Drift, in the subpolar North Atlantic. Results of a wide range of analyses clearly reveal the influence of millennial-scale variability in iceberg discharge on ocean surface condition and bottom current variability in the subpolar North Atlantic during marine isotope stage 100. We identified eight events of ice-rafted debris, which occurred mostly with decreases in sea surface temperature and in current components indicating North Atlantic Deep Water. These decreases are interpreted by weakened deep water formation linked to iceberg discharge, similarly to observations from the last glacial period. Dolomite fraction of the ice-rafted events in early MIS 100 like the last glacial Heinrich events suggests massive collapse of the Laurentide ice sheet in North America. At the same time, our early glacial data suggest differences from the last glacial period: absence of 1470-year periodicity in the interactions between ice sheets and ocean, and northerly shift of the ice-rafted debris belt. Our high-resolution data largely improve the picture of ice-sheet/ocean interactions on millennial time scales in the early glacial period after major Northern Hemisphere glaciation.

  1. Electromagnetic augmentation for casting of thin metal sheets

    Energy Technology Data Exchange (ETDEWEB)

    Hull, John R. (Hinsdale, IL)

    1989-01-01

    Thin metal sheets are cast by magnetically levitating molten metal deposited in a mold within a ferromagnetic yoke and between AC conducting coils and linearly displacing the magnetically levitated liquid metal while it is being cooled by the water-cooled walls of the mold to form a solid metal sheet. A conducting shield is electrically coupled to the molten metal sheet to provide a return path for eddy currents induced in the metal sheet by the current in the AC conducting coils. In another embodiment, a DC conducting coil is coupled to the metal sheet for providing a direct current therein which interacts with the magnetic field to levitate the moving metal sheet. Levitation of the metal sheet in both molten and solid forms reduces its contact pressure with the mold walls while maintaining sufficient engagement therebetween to permit efficient conductive cooling by the mold through which a coolant fluid may be circulated. The magnetic fields associated with the currents in the aforementioned coils levitate the molten metal sheet while the mold provides for its lateral and vertical confinement. A leader sheet having electromagnetic characteristics similar to those of the molten metal sheet is used to start the casing process and precedes the molten metal sheet through the yoke/coil arrangement and mold and forms a continuous sheet therewith. The yoke/coil arrangement may be either U-shaped with a single racetrack coil or may be rectangular with a pair of spaced, facing bedstead coils.

  2. Reducing Test Anxiety while Increasing Learning: The Cheat Sheet

    Science.gov (United States)

    Erbe, Brigitte

    2007-01-01

    Student learning is greatly enhanced by studying prior to an exam. Allowing students to prepare a cheat sheet for the exam helps structure this study time and deepens learning. The crib sheet is well defined: one double-sided page of notes. An award for the best and most creative cheat sheet allows the instructor to appreciate the students'…

  3. Crib Sheets and Exam Performance in a Data Structures Course

    Science.gov (United States)

    Hamouda, Sally; Shaffer, Clifford A.

    2016-01-01

    In this paper, we study the relationship between the use of "crib sheets" or "cheat sheets" and performance on in-class exams. Our extensive survey of the existing literature shows that it is not decisive on the questions of when or whether crib sheets actually help students to either perform better on an exam or better learn…

  4. 49 CFR 1243.2 - Condensed balance sheet.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Condensed balance sheet. 1243.2 Section 1243.2... § 1243.2 Condensed balance sheet. Commencing with reports for the 3 months beginning January 1, 1972, and... hereby, required to compile and file quarterly reports of balance sheet items in accordance with...

  5. Analysis of Financial Position Based on the Balance Sheet

    OpenAIRE

    Spineanu-Georgescu Luciana

    2011-01-01

    Analysis of financial position based on the balance sheet is mainly aimed at assessing the extent to which financial structure chosen by the firm, namely, financial resources, covering the needs reflected in the balance sheet financed. This is done through an analysis known as horizontal analysis balance sheet financial imbalances.

  6. Vaccination Records for Kids

    Science.gov (United States)

    ... teams, and summer camps or to travel. Recording Immunizations Good record- keeping begins with good record- taking. ... to each visit with his doctor. Finding Official Immunization Records CDC does not have immunization record information. ...

  7. The Greenland Ice Sheet Monitoring Network (GLISN)

    Science.gov (United States)

    Anderson, K. R.; Beaudoin, B. C.; Butler, R.; Clinton, J. F.; Dahl-Jensen, T.; Ekstrom, G.; Giardini, D.; Govoni, A.; Hanka, W.; Kanao, M.; Larsen, T.; Lasocki, S.; McCormack, D. A.; Mykkeltveit, S.; Nettles, M.; Agostinetti, N. P.; Stutzmann, E.; Tsuboi, S.; Voss, P.

    2010-12-01

    The GreenLand Ice Sheet monitoring Network (GLISN) is an international, broadband seismic capability for Greenland, being installed and implemented through the collaboration of Denmark, Canada, Germany, Italy, Japan, Norway, Poland, Switzerland, and USA. GLISN is a real-time sensor array of seismic stations to enhance and upgrade the performance of the sparse Greenland seismic infrastructure for detecting, locating, and characterizing glacial earthquakes and other cryo-seismic phenomena, and contributing to our understanding of Ice Sheet dynamics. Complementing data from satellites, geodesy, and other sources, and in concert with these technologies, GLISN will provide a powerful tool for detecting change, and will advance new frontiers of research in the glacial systems; the underlying geological and geophysical processes affecting the Greenland Ice Sheet; interactions between oceans, climate, and the cryosphere; and other multidisciplinary areas of interest to geoscience and climate dynamics. The glacial processes that induce seismic events (internal deformation, sliding at the base, disintegration at the calving front, drainage of supra-glacial lakes) are all integral to the overall dynamics of glaciers, and seismic observations of glaciers therefore provide a quantitative means for monitoring changes in their behavior over time. Long-term seismic monitoring of the Greenland Ice Sheet will contribute to identifying possible unsuspected mechanisms and metrics relevant to ice sheet collapse, and will provide new constraints on Ice Sheet dynamic processes and their potential roles in sea-level rise during the coming decades. GLISN will provide a new, fiducial reference network in and around Greenland for monitoring these phenomena in real-time, and for the broad seismological study of Earth and earthquakes. The 2010 summer field season saw the installation or upgrade of 9 stations in the GLISN network. Sites visited under the GLISN project include Station Nord (NOR

  8. The state of the Greenland Ice Sheet

    DEFF Research Database (Denmark)

    Simonsen, Sebastian Bjerregaard

    IS and the paleo-temperature reconstructions retrieved from ice cores.The dynamical firn model developed in this thesis explains13 % of the observed volume change of the GrIS from 2003-2008, without contributing to the global sea-level rise. This emphasizes the need for well constraint firn-compaction models. Here...... compaction on ice sheet scales. The modeling objectives are multiple and aim at estimating the contribution from the firn to the observed volume change of the GrIS and to the diffusion of stable water isotopes. The firn modeling then provides crucial information on total mass balance of the Gr......-sheet configurations formed by the variation of both internal-model parameters and external climate forcing. To investigate the importance of the validation, a multi-metric validation approach is applied to the ensemble members. The validation shows that the commonly used validation measures, such as the total ice...

  9. Neutral sheet crossings in the distant magnetotail

    International Nuclear Information System (INIS)

    Heikkila, W.J.; Slavin, J.A.; Smith, E.J.; Baker, D.N.; Zwickl, R.D.

    1985-01-01

    We have analyzed the magnetic field data from ISEE-3 in the distant magnetotail for 18 crossings of the cross-tail current sheet (or so-called natural sheet) to determine the direction of the normal component B/sub z/. The crossings occurred near the middle of the aberrated magnetotail (0 0.4 nT), consistent with closed field lines connected to the earth. In 3 cases B/sub z/ was very close to zero; in several instances there was structure in B/sub y/, suggesting localized currents with x or z directions. One may have been a magnetopause crossing. The strong preponderance of northward B/sub z/ favors a model of the magnetotail which is dominated by boundary layer plasma, flowing tailward on closed magnetic field lines, which requires the existence of an electric field in the sense from dusk to dawn. 37 refs., 15 figs., 1 tab

  10. Lubricant Test Methods for Sheet Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

    2008-01-01

    Sheet metal forming of tribologically difficult materials such as stainless steel, Al-alloys and Ti-alloys or forming in tribologically difficult operations like ironing, punching or deep drawing of thick plate requires often use of environmentally hazardous lubricants such as chlorinated paraffin...... oils in order to avoid galling. The present paper describes a systematic research in the development of new, environmentally harmless lubricants focusing on the lubricant testing aspects. A system of laboratory tests has been developed to study the lubricant performance under the very varied conditions...... appearing in different sheet forming operations such as stretch forming, deep drawing, ironing and punching. The laboratory tests have been especially designed to model the conditions in industrial production. Application of the tests for evaluating new lubricants before introducing them in production has...

  11. Comprehensibility of material safety data sheets.

    Science.gov (United States)

    Kolp, P; Sattler, B; Blayney, M; Sherwood, T

    1993-01-01

    The Hazard Communications Standard, commonly known as the Worker Right to Know law, requires that a chemical information sheet, known as a material safety data sheet (MSDS), be produced for all hazardous chemicals. This study examines the comprehensibility of a sample of MSDSs to a group of about 100 unionized workers in manufacturing industries located in the state of Maryland. Workers were given several MSDSs and performed the equivalent of an open-book test answering questions regarding health and safety information that was provided on the MSDS. On average, the information on the MSDSs was found to be about one-third incomprehensible. This result raises concerns regarding policies and practices for hazard communication. There is a clear indication that MSDSs need to be improved if workers must rely on them for health and safety information.

  12. PRODUCTION OF SHEET FROM PARTICULATE MATERIAL

    Science.gov (United States)

    Blainey, A.

    1959-05-12

    A process is presented for forming coherent sheet material from particulate material such as granular or powdered metal, granular or powdered oxide, slurries, pastes, and plastic mixes which cohere under pressure. The primary object is to avoid the use of expensive and/ or short lived pressing tools, that is, dies and specially profiled rolls, and so to reduce the cost of the product and to prcvide in a simple manner for the making of the product in a variety of shapes or sizes. The sheet material is formed when the particulate material is laterally confined in a boundary material deformable in all lateral directions under axial pressure and then axially compressing the layer of particulate material together with the boundary material.

  13. Ranking beta sheet topologies of proteins

    DEFF Research Database (Denmark)

    Fonseca, Rasmus; Helles, Glennie; Winter, Pawel

    2010-01-01

    One of the challenges of protein structure prediction is to identify long-range interactions between amino acids. To reliably predict such interactions, we enumerate, score and rank all beta-topologies (partitions of beta-strands into sheets, orderings of strands within sheets and orientations...... of paired strands) of a given protein. We show that the beta-topology corresponding to the native structure is, with high probability, among the top-ranked. Since full enumeration is very time-consuming, we also suggest a method to deal with proteins with many beta-strands. The results reported...... in this paper are highly relevant for ab initio protein structure prediction methods based on decoy generation. The top-ranked beta-topologies can be used to find initial conformations from which conformational searches can be started. They can also be used to filter decoys by removing those with poorly...

  14. Early Holocene hydroclimate of Baffin Bay: Understanding the interplay between abrupt climate change events and ice sheet fluctuations

    Science.gov (United States)

    Corcoran, M. C.; Thomas, E. K.; Castañeda, I. S.; Briner, J. P.

    2017-12-01

    Understanding the causes of ice sheet fluctuations resulting in sea level rise is essential in today's warming climate. In high-latitude ice-sheet-proximal environments such as Baffin Bay, studying both the cause and the rate of ice sheet variability during past abrupt climate change events aids in predictions. Past climate reconstructions are used to understand ice sheet responses to changes in temperature and precipitation. The 9,300 and 8,200 yr BP events are examples of abrupt climate change events in the Baffin Bay region during which there were multiple re-advances of the Greenland and Laurentide ice sheets. High-resolution (decadal-scale) hydroclimate variability near the ice sheet margins during these abrupt climate change events is still unknown. We will generate a decadal-scale record of early Holocene temperature and precipitation using leaf wax hydrogen isotopes, δ2Hwax, from a lake sediment archive on Baffin Island, western Baffin Bay, to better understand abrupt climate change in this region. Shifts in temperature and moisture source result in changes in environmental water δ2H, which in turn is reflected in δ2Hwax, allowing for past hydroclimate to be determined from these compound-specific isotopes. The combination of terrestrial and aquatic δ2Hwax is used to determine soil evaporation and is ultimately used to reconstruct moisture variability. We will compare our results with a previous analysis of δ2Hwax and branched glycerol dialkyl glycerol tetraethers, a temperature and pH proxy, in lake sediment from western Greenland, eastern Baffin Bay, which indicates that cool and dry climate occurred in response to freshwater forcing events in the Labrador Sea. Reconstructing and comparing records on both the western and eastern sides of Baffin Bay during the early Holocene will allow for a spatial understanding of temperature and moisture balance changes during abrupt climate events, aiding in ice sheet modeling and predictions of future sea level

  15. Positioning and loading apparatus for self-developing film sheets

    International Nuclear Information System (INIS)

    Erikson, H.E.

    1979-01-01

    It is conventional to expose large-format self-processing photographic films, for example those used in x-ray exposures, in individual cassettes, the exposed film sheets being registered in the cassette with image-receiving sheets and transferred to a processor. This invention is concerned with a positioning and loading-device for receiving the cassette superposed on the print sheet and interengaged to permit the transfer of the registering film sheet and print sheet to the processor. (U.K.)

  16. Reflective composite sheet design for LCD backlight recycling.

    Science.gov (United States)

    Kim, Taehyung; Kim, Kibeom; Lee, Eun Soo; Jeong, Won Young; Lim, Dae Young; Choi, Suk-Won

    2014-05-05

    We have designed a reflective composite sheet consisting of a birefringent polymer matrix and isolated isotropic or minimally birefringent fibers. The optical properties of the sheet have been investigated in terms of the width, spacing, and thickness of the individual fibers. Commercial software (FDTD Solution) was used to simulate the reflectance of the proposed sheet, and conventional processes such as cast-film extrusion in combination with solid-state drawing were used to manufacture the multilayer composite sheet. The measured and simulated reflectance spectra confirm the feasibility of employing the sheet as a reflective polarizer.

  17. Fabrication of Carbon Nanotube Polymer Actuator Using Nanofiber Sheet

    Science.gov (United States)

    Kato, Hayato; Shimizu, Akikazu; Sato, Taiga; Kushida, Masahito

    2017-11-01

    Carbon nanotube polymer actuators were developed using composite nanofiber sheets fabricated by multi-walled carbon nanotubes(MWCNTs) and poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP). Nanofiber sheets were fabricated by electrospinning method. The effect of flow rate and polymer concentration on nanofiber formation were verified for optimum condition for fabricating nanofiber sheets. We examined the properties of MWCNT/PVDF-HFP nanofiber sheets, as follows. Electrical conductivity and mechanical strength increased as the MWCNT weight ratio increased. We fabricated carbon nanotube polymer actuators using MWCNT/PVDF-HFP nanofiber sheets and succeeded in operating of our actuators.

  18. Ice-sheet modelling characteristics in sea-level-based temperature reconstructions over the last glacial cycle

    OpenAIRE

    Wilschut, F.; Bintanja, R.; van de Wal, R.S.W.

    2006-01-01

    A widely used method for investigating palaeotemperatures is to analyze local proxy records (e.g. ice cores or deep-sea sediment cores). The interpretation of these records is often not straightforward, and global or hemispheric means cannot be deduced from local estimates because of large spatial variability. Using a different approach, temperature changes over the last glacial cycle can be estimated from sea-level observations by applying an inverse method to an ice-sheet model. In order to...

  19. Nuclear Data Sheets for 225Fr

    Energy Technology Data Exchange (ETDEWEB)

    Baglin, Coral M.

    2005-05-16

    Nuclear structure data pertaining to {sup 225}Fr have been evaluated, and incorporated into the ENSDF data file. This evaluation includes literature available by 16 May 2005 and supersedes the previous publication for {sup 225}Fr (Y.A. Akovali, ''Nuclear Data Sheets 60, 617 (1990)'', literature cutoff date 1 June 1989). Data have been incorporated from the following references: 1987Co19, 1997BuO3 and 2003AuO3.

  20. Live Score Following on Sheet Music Images

    OpenAIRE

    Dorfer, Matthias; Arzt, Andreas; Böck, Sebastian; Durand, Amaury; Widmer, Gerhard

    2016-01-01

    In this demo we show a novel approach to score following. Instead of relying on some symbolic representation, we are using a multi-modal convolutional neural network to match the incoming audio stream directly to sheet music images. This approach is in an early stage and should be seen as proof of concept. Nonetheless, the audience will have the opportunity to test our implementation themselves via 3 simple piano pieces.

  1. Quadric Resistive Sheet Profile for Wideband Antennas

    Directory of Open Access Journals (Sweden)

    Z. Raida

    2007-09-01

    Full Text Available A new type of a nonreflecting resistive dipole antenna with quadric continuous resistivity profile is presented in this paper. The antenna is mathematically described and compared with the antenna originally proposed by Wu and King. The verification of a proposed theory and the comparison between Wu-King and quadric profile are carried out by simulation models that were designed for this purpose. The attention is turned to the proper attenuation of a wave excited on the resistive sheet, especially.

  2. Single sheet metal oxides and hydroxides

    DEFF Research Database (Denmark)

    Huang, Lizhi

    The synthesis of layered double hydroxides (LDHs) provides a relatively easy and traditional way to build versatile chemical compounds with a rough control of the bulk structure. The delamination of LDHs to form their single host layers (2D nanosheets) and the capability to reassemble them offer ......) Delamination of the LDHs structure (oxGRC12) with the formation of single sheet iron (hydr)oxide (SSI). (3) Assembly of the new 2D nanosheets layer by layer to achieve desired functionalities....

  3. Laminated multilayer sheet structure and its utilization

    International Nuclear Information System (INIS)

    Chiba, K.; Itoh, K.; Mitani, Y.; Sobajima, S.; Yonemura, U.

    1980-01-01

    A laminated multilayer sheet structure is described comprising (A) an opaque flexible sheet layer, and (B) a flexible layer laminated on the surface of layer (A) and composed of a transparent thermic ray reflecting layer (B 1 ) bonded to a transparent synthetic resin layer (B 2 ), said layer (B 1 ) being a transparent thermic ray reflecting layer composed of (I) a layer of a metal having a thickness of about 50 to about 600 A, said metal being selected from the group consisting of gold, silver, copper, aluminum and a mixture of alloy of at least two of said metals, and (II) a high refractive substance layer having a thickness of about 50 to about 600 A, of an oxide of titanium derived from a layer of an organic titanium compound of the formula Ti 1 O/sub m/R/sub n/, where R is alkyl of 1-20 carbon atoms, l=1-30, m=4+3(1-1), and n=4+2(1-1), and containing the organic residual moiety of the organic titanium compound, the amount of said organic residual moiety being 0.1 to 30% by weight based on the weight of the high refractive substance layer; or said layer (B 1 ) being a transparent semiconductive layer having a thickness of about 500 to about 5,000 a and being composed of a compound selected from the group consisting of indium oxide, tin oxide, cadmium oxide, antimony oxide, copper iodide, and a mixture of at least two of said compounds. A method is described for heat-insulating a room, which comprises applying to the surface of a floor, wall, ceiling or partition in the room a laminated multilayer sheet structure comprising (A) an opaque flexible sheet layer, and (B) a flexible layer laminated on the surface of layer (A) and composed of a transparent thermic ray reflecting layer (B 1 ) bonded to a transparent synthetic resin layer

  4. The stretch zone of automotive steel sheets

    Indian Academy of Sciences (India)

    The stretch zone of automotive steel sheets. L' AMBRIŠKO1,∗ and L PEŠEK2. 1Institute of Structural Engineering, Faculty of Civil Engineering,. Technical University of Košice, Vysokoškolská 4, 042 00 Košice, Slovak Republic. 2Department of Materials Science, Faculty of Metallurgy,. Technical University of Košice, Letná 9, ...

  5. 16 CFR 460.13 - Fact sheets.

    Science.gov (United States)

    2010-01-01

    ...'s label, you must use that chart. For foamed-in-place insulations, you must show the R-value of your product at 31/2 inches. You can also show R-values at other thicknesses. (2) You can put the charts for... loose-fill insulation in two different bag sizes, you can put both coverage charts on one fact sheet, as...

  6. Ice sheets as a missing component of the global silicon cycle

    Science.gov (United States)

    Hawkings, J.; Hatton, J.; Hendry, K. R.; Wadham, J.; Ivanovic, R. F.; Kohler, T. J.; Stibal, M.; Beaton, A.; Lamarche-Gagnon, G.; Tedstone, A.; Pike, J.; Tranter, M.

    2016-12-01

    Silicon (Si) plays an important role in global biogeochemical cycles. It is required for the growth of diatoms, silicoflagellates, radiolarians and some sponges. Diatoms build their frustules out of silica and account for approximately half of oceanic primary production. Therefore determining the sensitivity of the Si cycle in the past, and its likely response to future climate warming, is important for our understanding of marine ecosystem change, biogeochemical cycling and, by association, the efficiency of the ocean's biological carbon pump. The δ30Si of biogenic silica in marine sediments is increasingly being used as a palaeoceanographic tool. In particular, there has been a focus on the δ30Si change from the Last Glacial Maximum (LGM; 21-25 ka) to present, with opal records showing an increase in δ30Si of 0.2-1.0 ‰ from LGM to present day. This has previously been explained by lower biological utilisation of Si and by swings in intermediate and deep-water dissolved silica due to changes in oceanic circulation. Here we challenge the paradigm that the ocean Si input flux and δ30Si composition was uniform over glacial-interglacial timescales. During the LGM glaciers and ice sheets covered nearly 30% of land surface, including much of North America and northern Eurasia. These palaeo ice sheets exported large quantities of eroded sediment into the oceans, and their wastage raised global sea level by 130 m. Research indicates glaciers may export significant quantities of nutrients to downstream ecosystems, including large amounts of reactive silica. Si fluxes and their associated δ30Si signature from the palaeo ice sheets have not been considered in previous interpretations of the marine Si inventory and δ30Si record. Here, we demonstrate the importance of huge ice sheet meltwater fluxes to the marine Si inventory and oceanic δ30Si composition during the last deglaciation. We present the first dissolved and amorphous particulate silica time series with

  7. Laser cutting of sheets for Tailored Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    Over the past few years there has been an enormous increase in the use of tailored blanks, especially in the automotive industry. Often the sheets for tailored blanks are shear cut, but results have been reported that the allowable sheet gap distance should not exceed 0.1 mm in order to obtain...... sound welds. Laser cutting the sheets may therefore be an alternative to shear cutting, if the cut kerf squareness can be kept below 0.05 mm.In a number of systematic laboratory experiments the effects of the major process parameters in laser cutting have been investigated. Each cut was quantified...... by the squareness, the surface roughness and the burr height. Mild steel as well as high strength steel with and with out galvanisation with thickness' of 0.7(5) and 1.25 were used.In the tests the difference in cut quality between a 5" and a 7.5" focusing lens were tested and the effect of using pulsed mode laser...

  8. Mass balance of the Antarctic ice sheet.

    Science.gov (United States)

    Wingham, D J; Shepherd, A; Muir, A; Marshall, G J

    2006-07-15

    The Antarctic contribution to sea-level rise has long been uncertain. While regional variability in ice dynamics has been revealed, a picture of mass changes throughout the continental ice sheet is lacking. Here, we use satellite radar altimetry to measure the elevation change of 72% of the grounded ice sheet during the period 1992-2003. Depending on the density of the snow giving rise to the observed elevation fluctuations, the ice sheet mass trend falls in the range -5-+85Gtyr-1. We find that data from climate model reanalyses are not able to characterise the contemporary snowfall fluctuation with useful accuracy and our best estimate of the overall mass trend-growth of 27+/-29Gtyr-1-is based on an assessment of the expected snowfall variability. Mass gains from accumulating snow, particularly on the Antarctic Peninsula and within East Antarctica, exceed the ice dynamic mass loss from West Antarctica. The result exacerbates the difficulty of explaining twentieth century sea-level rise.

  9. 1970-1997 energy balance-sheets

    International Nuclear Information System (INIS)

    1998-01-01

    The aim of this document is to bring together a consistent and harmonized set of statistical data on energy economics in the French territory. The information is based on the global and structural approach of the different energy balance-sheets published between 1970 and 1997. The first chapter gives a general idea of the energy situation of the passed year and outlines the evolution of the main aggregates (production, primary and final consumption etc..) comparatively to those of the general economy. The second chapter is devoted to the history of energy economics. Time series of indicators and diagrams allow to precise the structural modifications that occurred during the last decades. The main transformations in the national energy production and the development of the different energy sources in the industry, the residential and tertiary sectors and in the transportation sector are described too. The third chapter gives numerical data on energy for the last 28 years using the common Mtpe unit (million of tons of petroleum equivalent). These balance sheets are based on new energy keeping methods and use identical equivalence coefficients. The last chapter presents the energy balance sheets for the last three years, using the proper units for coal, petroleum, gas and electricity. (J.S.)

  10. Sheet production apparatus for removing a crystalline sheet from the surface of a melt using gas jets located above and below the crystalline sheet

    Energy Technology Data Exchange (ETDEWEB)

    Kellerman, Peter L.; Thronson, Gregory D.

    2017-06-14

    In one embodiment, a sheet production apparatus comprises a vessel configured to hold a melt of a material. A cooling plate is disposed proximate the melt and is configured to form a sheet of the material on the melt. A first gas jet is configured to direct a gas toward an edge of the vessel. A sheet of a material is translated horizontally on a surface of the melt and the sheet is removed from the melt. The first gas jet may be directed at the meniscus and may stabilize this meniscus or increase local pressure within the meniscus.

  11. Simulations of the Scandinavian ice sheet and its subsurface conditions

    Energy Technology Data Exchange (ETDEWEB)

    Boulton, G.S.; Caban, P.; Hulton, N. [Edinburgh Univ. (United Kingdom). Dept of Geology and Geophysics

    1999-12-01

    An ice sheet model has been applied to an approximate flow line through the area of the Fennoscandian ice sheet. The modelled ice sheet fluctuations have been matched with stratigraphic evidence of Weichselian ice sheet fluctuation in order to simulate ice sheet attributes through time along the flowline. The model predicts extensive melting at the base of the ice sheet. This output has been used as an input to a simplified model of hydrogeology along the southern flank of the ice sheet so as to reconstruct patterns of subglacial groundwater flow. The output from the model is also used to estimate patterns of subglacial stress and strain. Results suggest that large scale subglacial groundwater catchment are formed which were quite differentin extent from modern catchment; that fossil subglacial groundwaters should be found at sampling depths; and much fracturing in shallow bedrock in Sweden could be glacially generated.

  12. Joining of Aluminium Alloy Sheets by Rectangular Mechanical Clinching

    International Nuclear Information System (INIS)

    Abe, Y.; Mori, K.; Kato, T.

    2011-01-01

    A mechanical clinching has the advantage of low running costs. However, the joint strength is not high. To improve the maximum load of the joined sheets by a mechanical clinching, square and rectangular mechanical clinching were introduced. In the mechanical clinching, the two sheets are mechanically joined by forming an interlock between the lower and upper sheets by the punch and die. The joined length with the interlock was increased by the rectangular punch and die. The deforming behaviours of the sheets in the mechanical clinching were investigated, and then the interlock in the sheets had distribution in the circumference of the projection. Although the interlocks were formed in both projection side and diagonal, the interlock in the diagonal was smaller because of the long contact length between the lower sheet and the die cavity surface. The maximum load of the joined sheets by the rectangular mechanical clinching was two times larger than the load by the round mechanical clinching.

  13. [DEVELOPMENT OF CELL SHEET ENGINEERING TECHNOLOGY IN ENGINEERING VASCULARIZED TISSUE].

    Science.gov (United States)

    Chen, Jia; Ma, Dongyang; Ren, Liling

    2015-03-01

    To review the development of cell sheet engineering technology in engineering vascularized tissue. The literature about cell sheet engineering technology and engineering vascularized tissue was reviewed, analyzed, and summarized. Although there are many methods to engineer vascularized tissue, cell sheet engineering technology provides a promising potential to develop a vascularized tissue. Recently, cell sheet engineering technology has become a hot topic in engineering vascularized tissue. Co-culturing endothelial cells on a cell sheet, endothelial cells are able to form three-dimensional prevascularized networks and microvascular cavities in the cell sheet, which facilitate the formation of functional vascular networks in the transplanted tissue. Cell sheet engineering technology is a promising strategy to engineer vascularized tissue, which is still being studied to explore more potential.

  14. Stochastic Climate Forcing for Ice-Sheet Models

    Science.gov (United States)

    Nuterman, Roman; Jochum, Markus

    2017-04-01

    Climate oscillations from glacial periods, with large parts of the continents covered with ice, to warm interglacials like the present one, are observed in various paleoclimatic records over the past few million years. According to Milankovitch theory, which is commonly assumed, these glacial cycles are linked to changes in insolation due to periodic changes of external earth-orbital forcing. However, this relationship is far from understood, because the insolation variations are so small that enhancing feedbacks must be at play. Moreover, there are several shortcomings in the Milankovitch theory: first, the duration of the glacial cycles changed at the so-called Mid-Pleistocene transition from 41,000 years to approximately 100,000 years and second, the interglacial of 400,000 years ago should not have happened. Thus, the current phasing and magnitude of the glacial cycles are far from being well understood and the external perturbation might only play a minor role in comparison to internal stochastic variations or internal oscillations. Although modern Ice-Sheet Models (ISM) are able to simulate evolution of ice-sheets at the entire glacial or interglacial time scales, the state-of-the-art Earth System Models (ESM) are too computationally expensive for such long integrations. Therefore, a constant climate forcing is usually used in the ice-sheet models. However, this approach does not take into account the stochastic nature of climate. At the same time, ESM models provide valuable information on natural climate variability, which then can be used for building stochastic climate models able to generate both continuous and discrete climate variables with stochastic atmospheric processes. In this study, we present a stochastic climate model, built from large sets of Community Earth System Model (CESM) integrations with both internal and external climate forcing, and able to generate synthetic climate forcing (such as temperature and precipitation fields) of any

  15. Temperature sheets and aspect sensitive radar echoes

    Directory of Open Access Journals (Sweden)

    H. Luce

    Full Text Available here have been years of discussion and controversy about the existence of very thin and stable temperature sheets and their relationship to the VHF radar aspect sensitivity. It is only recently that very high-resolution in situ temperature observations have brought credence to the reality and ubiquity of these structures in the free atmosphere and to their contribution to radar echo enhancements along the vertical. Indeed, measurements with very high-resolution sensors are still extremely rare and rather difficult to obtain outside of the planetary boundary layer. They have only been carried out up to the lower stratosphere by Service d’A´ eronomie (CNRS, France for about 10 years. The controversy also persisted due to the volume resolution of the (Mesosphere-Stratosphere-Troposphere VHF radars which is coarse with respect to sheet thickness, although widely sufficient for meteorological or mesoscale investigations. The contribution within the range gate of many of these structures, which are advected by the wind, and decay and grow at different instants and could be distorted either by internal gravity waves or turbulence fields, could lead to radar echoes with statistical properties similar to those produced by anisotropic turbulence. Some questions thus remain regarding the manner in which temperature sheets contribute to VHF radar echoes. In particular, the zenithal and azimuthal angular dependence of the echo power may not only be produced by diffuse reflection on stable distorted or corrugated sheets, but also by extra contributions from anisotropic turbulence occurring in the stratified atmosphere. Thus, for several years, efforts have been put forth to improve the radar height resolution in order to better describe thin structures. Frequency interferometric techniques are widely used and have been recently further developed with the implementation of high-resolution data processings. We begin by reviewing briefly some characteristics

  16. Temperature sheets and aspect sensitive radar echoes

    Directory of Open Access Journals (Sweden)

    H. Luce

    2001-08-01

    Full Text Available here have been years of discussion and controversy about the existence of very thin and stable temperature sheets and their relationship to the VHF radar aspect sensitivity. It is only recently that very high-resolution in situ temperature observations have brought credence to the reality and ubiquity of these structures in the free atmosphere and to their contribution to radar echo enhancements along the vertical. Indeed, measurements with very high-resolution sensors are still extremely rare and rather difficult to obtain outside of the planetary boundary layer. They have only been carried out up to the lower stratosphere by Service d’A´ eronomie (CNRS, France for about 10 years. The controversy also persisted due to the volume resolution of the (Mesosphere-Stratosphere-Troposphere VHF radars which is coarse with respect to sheet thickness, although widely sufficient for meteorological or mesoscale investigations. The contribution within the range gate of many of these structures, which are advected by the wind, and decay and grow at different instants and could be distorted either by internal gravity waves or turbulence fields, could lead to radar echoes with statistical properties similar to those produced by anisotropic turbulence. Some questions thus remain regarding the manner in which temperature sheets contribute to VHF radar echoes. In particular, the zenithal and azimuthal angular dependence of the echo power may not only be produced by diffuse reflection on stable distorted or corrugated sheets, but also by extra contributions from anisotropic turbulence occurring in the stratified atmosphere. Thus, for several years, efforts have been put forth to improve the radar height resolution in order to better describe thin structures. Frequency interferometric techniques are widely used and have been recently further developed with the implementation of high-resolution data processings. We begin by reviewing briefly some characteristics

  17. Sheet-bulk metal forming – forming of functional components from sheet metals

    Directory of Open Access Journals (Sweden)

    Merklein Marion

    2015-01-01

    Full Text Available The paper gives an overview on the application of sheet-bulk metal forming operations in both scientific and industrial environment. Beginning with the need for an innovative forming technology, the definition of this new process class is introduced. The rising challenges of the application of bulk metal forming operations on sheet metals are presented and the demand on a holistic investigation of this topic is motivated. With the help of examples from established production processes, the latest state of technology and the lack on fundamental knowledge is shown. Furthermore, perspectives regarding new research topics within sheet-bulk metal forming are presented. These focus on processing strategies to improve the quality of functional components by the application of process-adapted semi-finished products as well as the local adaption of the tribological system.

  18. Antarctic ice sheet discharge driven by atmosphere-ocean feedbacks at the Last Glacial Termination.

    Science.gov (United States)

    Fogwill, C J; Turney, C S M; Golledge, N R; Etheridge, D M; Rubino, M; Thornton, D P; Baker, A; Woodward, J; Winter, K; van Ommen, T D; Moy, A D; Curran, M A J; Davies, S M; Weber, M E; Bird, M I; Munksgaard, N C; Menviel, L; Rootes, C M; Ellis, B; Millman, H; Vohra, J; Rivera, A; Cooper, A

    2017-01-05

    Reconstructing the dynamic response of the Antarctic ice sheets to warming during the Last Glacial Termination (LGT; 18,000-11,650 yrs ago) allows us to disentangle ice-climate feedbacks that are key to improving future projections. Whilst the sequence of events during this period is reasonably well-known, relatively poor chronological control has precluded precise alignment of ice, atmospheric and marine records, making it difficult to assess relationships between Antarctic ice-sheet (AIS) dynamics, climate change and sea level. Here we present results from a highly-resolved 'horizontal ice core' from the Weddell Sea Embayment, which records millennial-scale AIS dynamics across this extensive region. Counterintuitively, we find AIS mass-loss across the full duration of the Antarctic Cold Reversal (ACR; 14,600-12,700 yrs ago), with stabilisation during the subsequent millennia of atmospheric warming. Earth-system and ice-sheet modelling suggests these contrasting trends were likely Antarctic-wide, sustained by feedbacks amplified by the delivery of Circumpolar Deep Water onto the continental shelf. Given the anti-phase relationship between inter-hemispheric climate trends across the LGT our findings demonstrate that Southern Ocean-AIS feedbacks were controlled by global atmospheric teleconnections. With increasing stratification of the Southern Ocean and intensification of mid-latitude westerly winds today, such teleconnections could amplify AIS mass loss and accelerate global sea-level rise.

  19. The influence of ice sheets on temperature during the past 38 million years inferred from a one-dimensional ice sheet-climate model

    Science.gov (United States)

    Stap, Lennert B.; van de Wal, Roderik S. W.; de Boer, Bas; Bintanja, Richard; Lourens, Lucas J.

    2017-09-01

    Since the inception of the Antarctic ice sheet at the Eocene-Oligocene transition (˜ 34 Myr ago), land ice has played a crucial role in Earth's climate. Through feedbacks in the climate system, land ice variability modifies atmospheric temperature changes induced by orbital, topographical, and greenhouse gas variations. Quantification of these feedbacks on long timescales has hitherto scarcely been undertaken. In this study, we use a zonally averaged energy balance climate model bidirectionally coupled to a one-dimensional ice sheet model, capturing the ice-albedo and surface-height-temperature feedbacks. Potentially important transient changes in topographic boundary conditions by tectonics and erosion are not taken into account but are briefly discussed. The relative simplicity of the coupled model allows us to perform integrations over the past 38 Myr in a fully transient fashion using a benthic oxygen isotope record as forcing to inversely simulate CO2. Firstly, we find that the results of the simulations over the past 5 Myr are dependent on whether the model run is started at 5 or 38 Myr ago. This is because the relation between CO2 and temperature is subject to hysteresis. When the climate cools from very high CO2 levels, as in the longer transient 38 Myr run, temperatures in the lower CO2 range of the past 5 Myr are higher than when the climate is initialised at low temperatures. Consequently, the modelled CO2 concentrations depend on the initial state. Taking the realistic warm initialisation into account, we come to a best estimate of CO2, temperature, ice-volume-equivalent sea level, and benthic δ18O over the past 38 Myr. Secondly, we study the influence of ice sheets on the evolution of global temperature and polar amplification by comparing runs with ice sheet-climate interaction switched on and off. By passing only albedo or surface height changes to the climate model, we can distinguish the separate effects of the ice-albedo and surface

  20. Deglaciation of the Eurasian ice sheet complex

    Science.gov (United States)

    Patton, Henry; Hubbard, Alun; Andreassen, Karin; Auriac, Amandine; Whitehouse, Pippa L.; Stroeven, Arjen P.; Shackleton, Calvin; Winsborrow, Monica; Heyman, Jakob; Hall, Adrian M.

    2017-08-01

    The Eurasian ice sheet complex (EISC) was the third largest ice mass during the Last Glacial Maximum with a span of over 4500 km and responsible for around 20 m of eustatic sea-level lowering. Whilst recent terrestrial and marine empirical insights have improved understanding of the chronology, pattern and rates of retreat of this vast ice sheet, a concerted attempt to model the deglaciation of the EISC honouring these new constraints is conspicuously lacking. Here, we apply a first-order, thermomechanical ice sheet model, validated against a diverse suite of empirical data, to investigate the retreat of the EISC after 23 ka BP, directly extending the work of Patton et al. (2016) who modelled the build-up to its maximum extent. Retreat of the ice sheet complex was highly asynchronous, reflecting contrasting regional sensitivities to climate forcing, oceanic influence, and internal dynamics. Most rapid retreat was experienced across the Barents Sea sector after 17.8 ka BP when this marine-based ice sheet disintegrated at a rate of ∼670 gigatonnes per year (Gt a-1) through enhanced calving and interior dynamic thinning, driven by oceanic/atmospheric warming and exacerbated by eustatic sea-level rise. From 14.9 to 12.9 ka BP the EISC lost on average 750 Gt a-1, peaking at rates >3000 Gt a-1, roughly equally partitioned between surface melt and dynamic losses, and potentially contributing up to 2.5 m to global sea-level rise during Meltwater Pulse 1A. Independent glacio-isostatic modelling constrained by an extensive inventory of relative sea-level change corroborates our ice sheet loading history of the Barents Sea sector. Subglacial conditions were predominately temperate during deglaciation, with over 6000 subglacial lakes predicted along with an extensive subglacial drainage network. Moreover, the maximum EISC and its isostatic footprint had a profound impact on the proglacial hydrological network, forming the Fleuve Manche mega-catchment which had an area of

  1. Too Warm, Two Poles: Super Interglacial Teleconnections and Possible Dual Pole Ice Sheet Stability

    Science.gov (United States)

    Brigham-Grette, J.; Deconto, R. M.; Roychowdhury, R.; de Wet, G.; Keisling, B. A.; Melles, M.; Minyuk, P.

    2017-12-01

    Geologic records of the warm Pliocene and Pleistocene super interglacials from both the Arctic and the Antarctic show us that ice sheets are more vulnerable to subtle polar warming than once thought. The continuous 3.6 million-year old sediment record from Lake El'gygytgyn (Lake E), the largest, deepest unglaciated Arctic lake located in central Chukotka, Russia, contains evidence of the warm forested Pliocene and the transition to changing glacial/interglacial climate cycles including at least 9 super interglacials and numerous other strong interglacials. Most of these super interglacials especially MIS 11 and 31, record conditions warmer than MIS 5e and many occur when global cycles are dominated by apparent 41ka forcing during the transition from the warm Pliocene to stronger G/IG variability. Given community consensus on the reduction of the Greenland Ice sheet (GIS) during MIS5e, we suggest that previous interglacials likely forced even larger reductions in the GIS, perhaps consistent with cosmogenic isotope exposure histories. We can best match MIS 11 and 31 from the Antarctic ANDRILL records when diatomaceous ooze deposition in the past recovered from under the modern Ross Ice Shelf suggests collapse of the WAIS and open water conditions. It is possible that a large number of the other Lake E super interglacials correspond to other intervals of WAIS collapse, within the uncertainly of the ANDRILL chronology. The forcing of super interglacials was not necessarily the result of high atmospheric CO2 but the result of preconditioning during periods of extremely low eccentricity and high obliquity. The challenge is now to incorporate oceanographic models (as suggested in Melles et al. 2012) to gauge ice sheet and ocean circulation sensitivity and timescales to preconditioning. Yet confirmation of past warming driving frequent ice sheet collapse in both hemispheres is clear geologically-based evidence that informs our future. Today, anthropogenic CO2 emissions are

  2. Analysis of groundwater flow beneath ice sheets

    International Nuclear Information System (INIS)

    Boulton, G. S.; Zatsepin, S.; Maillot, B.

    2001-03-01

    The large-scale pattern of subglacial groundwater flow beneath European ice sheets was analysed in a previous report. It was based on a two-dimensional flowline model. In this report, the analysis is extended to three dimensions by exploring the interactions between groundwater and tunnel flow. A theory is developed which suggests that the large-scale geometry of the hydraulic system beneath an ice sheet is a coupled, self-organising system. In this system the pressure distribution along tunnels is a function of discharge derived from basal meltwater delivered to tunnels by groundwater flow, and the pressure along tunnels itself sets the base pressure which determines the geometry of catchments and flow towards the tunnel. The large-scale geometry of tunnel distribution is a product of the pattern of basal meltwater production and the transmissive properties of the bed. The tunnel discharge from the ice margin of the glacier, its seasonal fluctuation and the sedimentary characteristics of eskers are largely determined by the discharge of surface meltwater which penetrates to the bed in the terminal zone. The theory explains many of the characteristics of esker systems and can account for tunnel valleys. It is concluded that the large-scale hydraulic regime beneath ice sheets is largely a consequence of groundwater/tunnel flow interactions and that it is essential similar to non-glacial hydraulic regimes. Experimental data from an Icelandic glacier, which demonstrates measured relationships between subglacial tunnel flow and groundwater flow during the transition from summer to winter seasons for a modern glacier, and which support the general conclusions of the theory is summarised in an appendix

  3. A transient fully coupled climate-ice-sheet simulation of the last glacial inception

    Science.gov (United States)

    Lofverstrom, M.; Otto-Bliesner, B. L.; Lipscomb, W. H.; Fyke, J. G.; Marshall, S.; Sacks, B.; Brady, E. C.

    2017-12-01

    The last glacial inception occurred around 115 ka, following a relative minimum in the Northern Hemisphere summer insolation. It is believed that small and spatially separated ice caps initially formed in the high elevation regions of northern Canada, Scandinavia, and along the Siberian Arctic coast. These ice caps subsequently migrated down in the valleys where they coalesced and formed the initial seeds of the large coherent ice masses that covered the northern parts of the North American and Eurasian continents over most of the last glacial cycle. Sea level records show that the initial growth period lasted for about 10 kyrs, and the resulting ice sheets may have lowered the global sea level by as much as 30 to 50 meters. Here we examine the transient climate system evolution over the period between 118 and 110 ka, using the fully coupled Community Earth System Model, version 2 (CESM2). This model features a two-way coupled high-resolution (4x4 km) ice-sheet component (Community Ice Sheet model, version 2; CISM2) that simulates ice sheets as an interactive component of the climate system. We impose a transient forcing protocol where the greenhouse gas concentrations and the orbital parameters follow the nominal year in the simulation; the model topography is also dynamically evolving in order to reflect changes in ice elevation throughout the simulation. The analysis focuses on how the climate system evolves over this time interval, with a special focus on glacial inception in the high-latitude continents. Results will highlight how the evolving ice sheets compare to data and previous model based reconstructions.

  4. Greenland ice sheet model parameters constrained using simulations of the Eemian Interglacial

    Directory of Open Access Journals (Sweden)

    A. Robinson

    2011-04-01

    Full Text Available Using a new approach to force an ice sheet model, we performed an ensemble of simulations of the Greenland Ice Sheet evolution during the last two glacial cycles, with emphasis on the Eemian Interglacial. This ensemble was generated by perturbing four key parameters in the coupled regional climate-ice sheet model and by introducing additional uncertainty in the prescribed "background" climate change. The sensitivity of the surface melt model to climate change was determined to be the dominant driver of ice sheet instability, as reflected by simulated ice sheet loss during the Eemian Interglacial period. To eliminate unrealistic parameter combinations, constraints from present-day and paleo information were applied. The constraints include (i the diagnosed present-day surface mass balance partition between surface melting and ice discharge at the margin, (ii the modeled present-day elevation at GRIP; and (iii the modeled elevation reduction at GRIP during the Eemian. Using these three constraints, a total of 360 simulations with 90 different model realizations were filtered down to 46 simulations and 20 model realizations considered valid. The paleo constraint eliminated more sensitive melt parameter values, in agreement with the surface mass balance partition assumption. The constrained simulations resulted in a range of Eemian ice loss of 0.4–4.4 m sea level equivalent, with a more likely range of about 3.7–4.4 m sea level if the GRIP δ18O isotope record can be considered an accurate proxy for the precipitation-weighted annual mean temperatures.

  5. Southernmost evidence of large European Ice Sheet-derived freshwater discharges during the Heinrich Stadials of the Last Glacial Period (Galician Interior Basin, Northwest Iberian Continental Margin)

    Science.gov (United States)

    Plaza-Morlote, M.; Rey, D.; Santos, J. F.; Ribeiro, S.; Heslop, D.; Bernabeu, A.; Mohamed, K. J.; Rubio, B.; Martíns, V.

    2017-01-01

    Reconstruction of circum-Atlantic ice-sheet motion and instabilities is crucial to understanding the mechanisms that triggered and/or enhanced abrupt climate changes. Using enviromagnetic and geochemical data, we provide a continuous and well-dated record of the evolution of glacial/interglacial sedimentation on the Northwest Iberian Margin during the last glacial period, covering the last six Heinrich Stadials. The record shows European sediments that were related to meltwater pre-events during the initial stages of HS1, HS2, and HS4 that corroborate the Channel River depositional history. The record also includes IRD from the Laurentide Ice Sheet and the European Ice Sheet during the final stages of these stadials, i.e., Heinrich Events. Therefore, this study provides insight into one of the potential forcing mechanisms for Heinrich Events and, by inference, for Heinrich Stadials.

  6. Gauge for measuring a sheet of material

    International Nuclear Information System (INIS)

    Dahlquist, J.A.; Goss, J.D.; Wennerberg, G.

    1986-01-01

    This invention provides a process for measuring the values of a parameter of a sheet of material at various points by a sensor system disposed in a head member, and for correcting the measured vAlues of the parameter to account for variability of the separation of the head member from a reference member. The process comprises: measuring the values of the parameter with the sensor system at several points; determining the separation of the head and reference members; and correcting the measured values according the separation. A distance sensor is coupled to the head member to measure the distance between the head and reference members

  7. BALANCE-SHEET vs. ARBITRAGE CDOs

    Directory of Open Access Journals (Sweden)

    SILVIU EDUARD DINCA

    2016-02-01

    Full Text Available During the past few years, in the recent post-crisis aftermath, global asset managers are constantly searching new ways to optimize their investment portfolios while financial and banking institutions around the world are exploring new alternatives to better secure their financing and refinancing demands altogether with the enhancement of their risk management capabilities. We will exhibit herewith a comparison between the balance-sheet and arbitrage CDO securitizations as financial markets-based funding, investment and risks mitigation techniques, highlighting certain key structuring and implementation specifics on each of them.

  8. SunShot Initiative Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    DOE Solar Energy Technologies Office

    2015-04-01

    The U.S. Department of Energy (DOE) SunShot Initiative is a collaborative national effort launched in 2011 that aggressively drives innovation to make solar energy fully cost competitive with traditional energy sources before the end of the decade. The SunShot fact sheet outlines goals and successes of the program as it works with private companies, universities, non-profit organizations, state and local governments, and national laboratories to drive down the cost of solar electricity to $0.06 per kilowatt-hour, without incentives, by the year 2020.

  9. SOME ASPECTS REGARDING BALANCE SHEET ANALYSIS

    Directory of Open Access Journals (Sweden)

    ILIE RĂSCOLEAN

    2014-10-01

    Full Text Available This paper presents some aspects of the analysis based on the balance sheet at an economic entity. Attempting to use economic analysis as a support tool in the decision. The case study is performed on the financial accounts of a company, analyzing the structure of the assets using the following rates: the rate of intangible assets; rate of tangible assets; rate financial assets; rate stocks; rate receivables and cash and cash equivalents rate. Liability structure is analyzed using the following rates: the rate of financial stability; global financial autonomy rate; overall borrowing rate; term borrowing rate.

  10. Hydrogen passivation of silicon sheet solar cells

    International Nuclear Information System (INIS)

    Tsuo, Y.S.; Milstein, J.B.

    1984-01-01

    Significant improvements in the efficiencies of dendritic web and edge-supported-pulling silicon sheet solar cells have been obtained after hydrogen ion beam passivation for a period of ten minutes or less. We have studied the effects of the hydrogen ion beam treatment with respect to silicon material damage, silicon sputter rate, introduction of impurities, and changes in reflectance. The silicon sputter rate for constant ion beam flux of 0.60 +- 0.05 mA/cm 2 exhibits a maximum at approximately 1400-eV ion beam energy

  11. French electric power balance sheet 2006

    International Nuclear Information System (INIS)

    Derdevet, Michel; Usatorre, Karine de

    2007-01-01

    The mission of RTE, the French electricity Transportation grid, a public service assignment, is to balance the electricity supply and demand in real time. This report presents RTE's technical results for the year 2006: key figures of the electricity balance sheet, RTE's public utility commitments, efficient market mechanisms and free flow of trades, lessons learnt from the power breakdown of November 4, 2006. The evolution of RTE's infrastructures and production means, the contract with Gaz de France for the improvement of Brittany's security of supply, and the results of RTE's 2006 satisfaction survey are presented in appendixes

  12. Spot welding of aluminium alloy sheets to coated steel sheets. Kakushu mekki koban to arumi gokin no spot yosetsusei

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, S.; Fukumura, K.; Soga, S. (Nisshin Steel Co. Ltd., Tokyo (Japan))

    1994-03-31

    Welding aluminum alloy sheets with coated steel sheets has become used frequently in association with weight reduction in automobiles. This paper describes investigations on the effects of spot welding aluminum alloy sheets with different kinds of coated steel sheets on optimal welding conditions and weld strength. An AC single-phase spot welding machine was used for an experiment using an aluminum alloy(5052)with a thickness of 1 mm(referred to as A)and different coated steel sheets with a thickness of 0.8 mm(referred to as B). The result may be summarized as follows: the weldable value of the electric current is closer to that for between the B steel sheets than the middle of that for between the As and between Bs; while the weldable current range is affected little by the coating materials when a CF electrode is used, it grows greater in aluminum coated steel sheets and hot-dip galvanized steel sheets than in alloyed hot-dip galvanized steel sheets and cold-rolled steel sheets when an R-type electrode is used; influence of the coating materials was observed in tensile shear strength and cross tensile shear strength; and any combination of metals shows fatigue strength lower than that in the A-A combination in a fatigue test of cross tensile system. 5 refs., 12 figs., 6 tabs.

  13. SEA-LEVEL RISE. Sea-level rise due to polar ice-sheet mass loss during past warm periods.

    Science.gov (United States)

    Dutton, A; Carlson, A E; Long, A J; Milne, G A; Clark, P U; DeConto, R; Horton, B P; Rahmstorf, S; Raymo, M E

    2015-07-10

    Interdisciplinary studies of geologic archives have ushered in a new era of deciphering magnitudes, rates, and sources of sea-level rise from polar ice-sheet loss during past warm periods. Accounting for glacial isostatic processes helps to reconcile spatial variability in peak sea level during marine isotope stages 5e and 11, when the global mean reached 6 to 9 meters and 6 to 13 meters higher than present, respectively. Dynamic topography introduces large uncertainties on longer time scales, precluding robust sea-level estimates for intervals such as the Pliocene. Present climate is warming to a level associated with significant polar ice-sheet loss in the past. Here, we outline advances and challenges involved in constraining ice-sheet sensitivity to climate change with use of paleo-sea level records. Copyright © 2015, American Association for the Advancement of Science.

  14. Severnaya Zemlya, arctic Russia: a nucleation area for Kara Sea ice sheets during the Middle to Late Quaternary

    DEFF Research Database (Denmark)

    Möller, Per; Lubinski, David J.; Ingólfsson, Ólafur

    2006-01-01

    Quaternary glacial stratigraphy and relative sea-level changes reveal at least four expansions of the Kara Sea ice sheet over the Severnaya Zemlya Archipelago at 79°N in the Russian Arctic, as indicated from tills interbedded with marine sediments, exposed in stratigraphic superposition, and from......-5e and MIS 5d-3. The MIS 6-5e event, associated with the high marine limit, implies ice-sheet thickness of >2000 m only 200 km from the deep Arctic Ocean, consistent with published evidence of ice grounding at ~1000 m water depth in the central Arctic Ocean. Till fabrics and glacial tectonics record...... repeated expansions of local ice caps exclusively, suggesting wet-based ice cap advance followed by cold-based regional ice-sheet expansion. Local ice caps over highland sites along the perimeter of the shallow Kara Sea, including the Byrranga Mountains, appear to have repeatedly fostered initiation...

  15. Single Point Incremental Forming using a Dummy Sheet

    DEFF Research Database (Denmark)

    Skjødt, Martin; Silva, Beatriz; Bay, Niels

    2007-01-01

    A new version of single point incremental forming (SPIF) is presented. This version includes a dummy sheet on top of the work piece, thus forming two sheets instead of one. The dummy sheet, which is in contact with the rotating tool pin, is discarded after forming. The new set-up influences...... the process and furthermore offers a number of new possibilities for solving some of the problems appearing in SPIF. Investigations of the influence of dummy sheet on: formability, wear, surface quality and bulging of planar sides is done by forming to test shapes: a hyperboloid and a truncated pyramid....... The possible influence of friction between the two sheets is furthermore investigated. The results show that the use of a dummy sheet reduces wear of the work piece to almost zero, but also causes a decrease in formability. Bulging of the planar sides of the pyramid is reduced and surface roughness...

  16. Subglacial lake and meltwater flow predictions of the last North American and European Ice Sheets

    Science.gov (United States)

    Livingstone, S. J.; Clark, C. D.; Tarasov, L.

    2012-04-01

    There is increasing recognition that subglacial lakes act as key components within the ice sheet system, capable of influencing ice-sheet topography, ice volume and ice flow. The subglacial water systems themselves are recognised as being both active and dynamic, with large discharges of meltwater capable of flowing down hydrological pathways both between lakes and to the ice-sheet margins. At present, much glaciological research is concerned with the role of modern subglacial lake systems in Antarctica. Another approach to the exploration of subglacial lakes involves identification of the geological record of subglacial lakes that once existed beneath ice sheets of the last glaciation. Investigation of such palaeo-subglacial lakes offers significant advantages because we have comprehensive information about the bed properties, they are much more accessible and we can examine and sample the sediments with ease. If we can find palaeo-subglacial lakes then we have the potential to advance understanding with regard to the topographic context and hydrological pathways that the phenomena form a part of; essentially we gain spatial and sedimentological information in relation to investigations of contemporary subglacial lakes and lose out on the short-time dynamics. In this work we present predictions of palaeo-subglacial lakes and meltwater drainage pathways under the former European and North American ice sheets during the last glaciation. We utilise data on the current topography and seafloor bathymetry, and elevation models of the ice and ground surface topography (interpolated to a 5 km grid) to calculate the hydraulic potential surface at the ice-sheet bed. Meltwater routing algorithms and the flooding of local hydraulic minima allow us to predict subglacial channels and lakes respectively. Given that specific ice-surface and bed topographies are only known from modelled outputs, and thus contain significant uncertainty, we utilise many such outputs to examine

  17. Autism: General Information. Fact Sheet Number 1 = Autismo: Informacion General. Fact Sheet Number 22.

    Science.gov (United States)

    Interstate Research Associates, McLean, VA.

    This fact sheet on autism is offered in both English and Spanish, and is the same in both languages although numbered differently. It provides a definition, information on incidence, typical characteristics, and educational implications. It notes that autism is listed as a separate category under the Individuals with Disabilities Education Act.…

  18. Global ice sheet/RSL simulations using the higher-order Ice Sheet System Model.

    Science.gov (United States)

    Larour, E. Y.; Ivins, E. R.; Adhikari, S.; Schlegel, N.; Seroussi, H. L.; Morlighem, M.

    2017-12-01

    Relative sea-level rise is driven by processes that are intimately linked to the evolution ofglacial areas and ice sheets in particular. So far, most Earth System models capable of projecting theevolution of RSL on decadal to centennial time scales have relied on offline interactions between RSL andice sheets. In particular, grounding line and calving front dynamics have not been modeled in a way that istightly coupled with Elasto-Static Adjustment (ESA) and/or Glacial-Isostatic Adjustment (GIA). Here, we presenta new simulation of the entire Earth System in which both Greenland and Antarctica ice sheets are tightly coupledto an RSL model that includes both ESA and GIA at resolutions and time scales compatible with processes suchas grounding line dynamics for Antarctica ice shelves and calving front dynamics for Greenland marine-terminatingglaciers. The simulations rely on the Ice Sheet System Model (ISSM) and show the impact of higher-orderice flow dynamics and coupling feedbacks between ice flow and RSL. We quantify the exact impact of ESA andGIA inclusion on grounding line evolution for large ice shelves such as the Ronne and Ross ice shelves, as well asthe Agasea Embayment ice streams, and demonstate how offline vs online RSL simulations diverge in the long run,and the consequences for predictions of sea-level rise.This work was performed at the California Institute of Technology's Jet Propulsion Laboratory undera contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

  19. Epilepsy: General Information. Fact Sheet Number 6 = La Epilepsia: Informacion General. Fact Sheet Number 20.

    Science.gov (United States)

    Interstate Research Associates, McLean, VA.

    This fact sheet on epilepsy is offered in both English and Spanish. It provides a definition, information on incidence, typical characteristics, and educational implications. It notes that epilepsy is classified as "other health impaired" under the Individuals with Disabilities Education Act and that students with epilepsy are eligible for special…

  20. Firm Investment and Balance-Sheet Problems in Japan

    OpenAIRE

    Toshitaka Sekine

    1999-01-01

    This paper investigates whether balance-sheet conditions of firms and their main banks matter for firm investment behavior using dynamic corporate panel data in Japan for the period 1985-95. It finds that smaller non-bond issuing firms were facing liquidity constraints; these firms’ balance-sheet conditions (the debt asset ratios) affected their investment from the midst of the bubble era by influencing main banks’ lending to them; and the deterioration of their main banks’ balance-sheet cond...

  1. Comparison of circumferential pelvic sheeting versus the T-POD on unstable pelvic injuries: A cadaveric study of stability.

    Science.gov (United States)

    Prasarn, Mark L; Conrad, Bryan; Small, John; Horodyski, MaryBeth; Rechtine, Glenn R

    2013-12-01

    Commercially available binder devices are commonly used in the acute treatment of pelvic fractures, while many advocate simply placing a circumferential sheet for initial stabilization of such injuries. We sought to determine whether or not the T-POD would provide more stability to an unstable pelvic injury as compared to circumferential pelvic sheeting. Unstable pelvic injuries (OTA type 61-C-1) were surgically created in five fresh, lightly embalmed whole human cadavers. Electromagnetic sensors were placed on each hemi-pelvis. The amount of angular motion during testing was measured using a Fastrak, three-dimensional, electromagnetic motion analysis device (Polhemus Inc., Colchester, VT). Either a T-POD or circumferential sheet was applied in random order for testing. The measurements recorded in this investigation included maximum displacements for sagittal, coronal, and axial rotation during application of the device, bed transfer, log-rolling, and head of bed elevation. There were no differences in motion of the injured hemi-pelvis during application of either the T-POD or circumferential sheet. During the bed transfer, log-rolling, and head of bed elevation, there were no significant differences in displacements observed when the pelvis was immobilized with either a sheet or pelvic binder (T-POD). A circumferential pelvic sheet is more readily available, costs less, is more versatile, and is equally as efficacious at immobilizing the unstable pelvis as compared to the T-POD. We advocate the use of circumferential sheeting for temporary stabilization of unstable pelvic injuries. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Residues and world-sheet instantons

    Energy Technology Data Exchange (ETDEWEB)

    Beasley, Chris [Joseph Henry Laboratories, Princeton University, New Jersey (United States)]. E-mail: cbeasley@princeton.edu; Witten, Edward [School of Natural Sciences, Institute for Advanced Studies, Princeton, New Jersey (United States)]. E-mail: witten@ias.edu

    2003-10-01

    We reconsider the question of which Calabi-Yau compactifications of the heterotic string are stable under world-sheet instanton corrections to the effective space-time superpotential. For instance, compactifications described by (0; 2) linear sigma models are believed to be stable, suggesting a remarkable cancellation among the instanton effects in these theories. Here, we show that this cancellation follows directly from a residue theorem, whose proof relies only upon the right-moving world-sheet supersymmetries and suitable compactness properties of the (0; 2) linear sigma model. Our residue theorem also extends to a new class of 'half-linear' sigma models. Using these half-linear models, we show that heterotic compactifications on the quintic hypersurface in CP{sup 4} for which the gauge bundle pulls back from a bundle on CP{sup 4} are stable. Finally, we apply similar ideas to compute the superpotential contributions from families of membrane instantons in M-theory compactifications on manifolds of G{sub 2} holonomy. (author)

  3. The manufacture of superplastic magnesium alloy sheet

    Energy Technology Data Exchange (ETDEWEB)

    Grimes, R.; Jackson, M.; Moorhouse, B.; Dashwood, R. [Department of Materials, Imperial College London (United Kingdom)

    2008-04-15

    Probably because of their propensity to dynamically recrystallise, superplastic behaviour can be obtained from magnesium alloys considerably more easily than from comparable aluminium alloys. In some cases even as cast magnesium alloys can exhibit reasonable superplasticity and there appears no need for the special alloying additions or complex thermal mechanical treatments required by aluminium alloys such as AA2004 or AA7475. The paper describes the superplastic behaviour (in uniaxial tension) and microstructure of sheet processed from strip cast AZ31 and AZ91. The material was tested in the as-cast condition and after warm rolling to a number of gauges. Industrially useful superplastic capability was demonstrated in strip cast AZ31 and AZ91 in the as cast condition. Furthermore good superplastic capability was also demonstrated in sheet rolled from the cast metal and the ductilities obtained were not significantly influenced by rolling strain. Twin roll strip casting represents a feasible and simple route for the production of superplastic material either for use in the as cast condition or after rolling to the required gauge. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

  4. Crib sheets and exam performance in a data structures course

    Science.gov (United States)

    Hamouda, Sally; Shaffer, Clifford A.

    2016-01-01

    In this paper, we study the relationship between the use of "crib sheets" or "cheat sheets" and performance on in-class exams. Our extensive survey of the existing literature shows that it is not decisive on the questions of when or whether crib sheets actually help students to either perform better on an exam or better learn the material. We report on our own detailed analysis for a body of crib sheets created for the final exam in a junior-level Data Structures and Algorithms course. We wanted to determine whether there is any feature of the crib sheets that correlates to good exam scores. Exam performance was compared against a number of potential indicators for quality in a crib sheet. We have found that students performed significantly better on questions at the comprehension level of Bloom's taxonomy when their crib sheet contained good information on the topic, while performance on questions at higher levels of the taxonomy did not show correlation to crib sheet contents. We have also seen that students at certain levels of performance on the final exam (specifically, medium-to-high performance) did relatively better on certain questions than other students at that performance level when they had good coverage of that question's topic on their crib sheet.

  5. Magnetic configurations of the tilted current sheets in magnetotail

    Directory of Open Access Journals (Sweden)

    C. Shen

    2008-11-01

    Full Text Available In this research, the geometrical structures of tilted current sheet and tail flapping waves have been analysed based on multiple spacecraft measurements and some features of the tilted current sheets have been made clear for the first time. The geometrical features of the tilted current sheet revealed in this investigation are as follows: (1 The magnetic field lines (MFLs in the tilted current sheet are generally plane curves and the osculating planes in which the MFLs lie are about vertical to the equatorial plane, while the normal of the tilted current sheet leans severely to the dawn or dusk side. (2 The tilted current sheet may become very thin, the half thickness of its neutral sheet is generally much less than the minimum radius of the curvature of the MFLs. (3 In the neutral sheet, the field-aligned current density becomes very large and has a maximum value at the center of the current sheet. (4 In some cases, the current density is a bifurcated one, and the two humps of the current density often superpose two peaks in the gradient of magnetic strength, indicating that the magnetic gradient drift current is possibly responsible for the formation of the two humps of the current density in some tilted current sheets. Tilted current sheets often appear along with tail current sheet flapping waves. It is found that, in the tail flapping current sheets, the minimum curvature radius of the MFLs in the current sheet is rather large with values around 1 RE, while the neutral sheet may be very thin, with its half thickness being several tenths of RE. During the flapping waves, the current sheet is tilted substantially, and the maximum tilt angle is generally larger than 45°. The phase velocities of these flapping waves are several tens km/s, while their periods and wavelengths are several tens of minutes, and several earth radii, respectively. These tail flapping events generally last several hours and occur during quiet periods or periods of

  6. Large Fleets Lead in Petroleum Reduction (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    Proc, H.

    2011-03-01

    Fact sheet describes Clean Cities' National Petroleum Reduction Partnership, an initiative through which large private fleets can receive support from Clean Cities to reduce petroleum consumption.

  7. Synthesis of nanometre-thick MoO3 sheets

    Science.gov (United States)

    Kalantar-Zadeh, Kourosh; Tang, Jianshi; Wang, Minsheng; Wang, Kang L.; Shailos, Alexandros; Galatsis, Kosmas; Kojima, Robert; Strong, Veronica; Lech, Andrew; Wlodarski, Wojtek; Kaner, Richard B.

    2010-03-01

    The formation of MoO3 sheets of nanoscale thickness is described. They are made from several fundamental sheets of orthorhombic α-MoO3, which can be processed in large quantities via a low cost synthesis route that combines thermal evaporation and mechanical exfoliation. These fundamental sheets consist of double-layers of linked distorted MoO6 octahedra. Atomic force microscopy (AFM) measurements show that the minimum resolvable thickness of these sheets is 1.4 nm which is equivalent to the thickness of two double-layers within one unit cell of the α-MoO3 crystal.

  8. Development of test sheets for operator's use of CRT and LDP of KNGR MMI

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee; Oh, In Seok; Lee, Hyun Chul

    2001-01-01

    The Korea Next Generation Reactor (KNGR) man-machine interface(MMI) design adopting digital technologies has been developed. The KNGR MMI consists of CRT-based compact operator workstations, a Large Display Panel (LDP) and others. Many human factors experiments have been performed to evaluate and enhance the KNGR MMI design. For these experiments, training for the use of CRT-based MMI has been performed usually to the operators operating nuclear power plants in conventional control rooms. In this report, test sheets for evaluating operators' skill of using CRT process mimic, the most complex information structure among the design elements of KNGR MMI, and LDP, another important information source for operators, are developed to evaluate rather objectively that such training is suitable for the human factors experiments of KNGR MMI design evaluation. For the CRT process mimic, five sets of test sheets are developed for each reactor operator, turbine operator, and control room supervisor. For the LDP, six sets of test sheets are developed for all of the three operators. This report describes the development process and includes test sheets, performance recording sheet, and test procedures.

  9. Quality assurance records and records' system

    International Nuclear Information System (INIS)

    Link, M.; Martinek, J.

    1980-01-01

    For nuclear power plants extensive proof of quality is required which has to be documented reliably by quality records. With respect to the paper volume it is the most comprehensive 'curriculum vitae' of the technique. Traditional methods of information and recording are unsatisfactory for meeting regulatory requirements for maintaining the QA-aspects of status reporting, completeness, traceability and retrieval. Therefore KWU has established a record (documentation) subsystem within the overall component qualification system. Examples of the general documentation requirements, the procedure and handling in accordance with this subsystem for mechanical equipment are to be described examplarily. Topics are: - National and international requirements - Definition of QA records - Modular and product orientated KWU-record subsystem - Criteria for developing records - Record control, distribution, collection, storage - New documentation techniques (microfilm, data processing) - Education and training of personnel. (orig./RW)

  10. Sedimentary record of erg migration

    Science.gov (United States)

    Porter, M. L.

    1986-06-01

    The sedimentary record of erg (eolian sand sea) migration consists of an idealized threefold division of sand-sea facies sequences. The basal division, here termed the fore-erg, is composed of a hierarchy of eolian sand bodies contained within sediments of the flanking depositional environment. These sand bodies consist of eolian strata deposited by small dune complexes, zibars, and sand sheets. The fore-erg represents the downwind, leading edge of the erg and records the onset of eolian sedimentation. Basin subsidence coupled with erg migration places the medial division, termed the central erg, over the fore-erg strata. The central erg, represented by a thick accumulation of large-scale, cross-stratified sandstone, is the product of large draa complexes. Eolian influence on regional sedimentation patterns is greatest in the central erg, and most of the sand transported and deposited in the erg is contained within this region. Reduction in sand supply and continued erg migration will cover the central-erg deposits with a veneer of back-erg deposits. This upper division of the erg facies sequence resembles closely the fore-erg region. Similar types of eolian strata are present and organized in sand bodies encased in sediments of the upwind flanking depositional environment(s). Back-erg deposits may be thin due to limited eolian influence on sedimentation or incomplete erg migration, or they may be completely absent because of great susceptibility to postdepositional erosion. Tectonic, climatic, and eustatic influences on sand-sea deposition will produce distinctive variations or modifications of the idealized erg facies sequence. The resulting variants in the sedimentary record of erg migration are illustrated with ancient examples from western North America, Europe, southern Africa, and South America.

  11. The production of ASTAR-811C ingot, plate and sheet

    Science.gov (United States)

    Buckman, R. William; Ring, Peter A.; Kangilaski, Mike

    1992-01-01

    ASTAR-811C, a tantalum based alloy composition developed during the 1960s for space nuclear power applications was selected as a potential candidate material for use in the Nuclear Assembly Test (NAT). For a critical study of irradiation behavior, this alloy required the production of a pilot sized ingot to provide sufficient quantity of well characterized and traceable material. Forty five kilograms of ingot were produced by double consumable electrode vacuum arc melting with AC power. The production schedule closely followed the processing steps used when the alloy was first developed. Data obtained indicated that both composition control and mechanical behavior were similar to those recorded from the original material. A portion of the ingot was processed to 3.8-mm thick plate and 0.76-mm thick sheet to provide stock for miniature Charpy and notched tensile specimens. This demonstrated that while a relatively low yield resulted from forging operations, due to adverse shape factors, over 90% yield was obtained from secondary working. The paper describes details of the various melting and metalworking stages involved in production. It concludes that if large quantities of the ASTAR-811C alloy are required, it can be produced within the necessary chemical specifications and within the capabilities of existing refractory metal producers.

  12. CMS Records Schedule

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS Records Schedule provides disposition authorizations approved by the National Archives and Records Administration (NARA) for CMS program-related records...

  13. Yearly energy balance sheets 1998-1999

    International Nuclear Information System (INIS)

    2001-01-01

    The objective of the presented statistics is to give a total picture of the Swedish energy supply and consumption 1998-1999. Compared to the regularly published energy balance sheets based on short periodic statistics, this publication is more disaggregated in the field of final energy consumption. The data are mainly based on yearly statistics on energy consumption in different sectors. The broad statistical base has made it possible to compile data for consumer categories on a fairly detailed level. In cases where direct statistical information is lacking or is insufficient, indirect calculation methods have been used for estimations or recalculations of basic statistics. Revisions and improvements of statistical sources as well as calculation methods will be performed successively. As a consequence of this, the statistics presented here could be revised in future publications

  14. Yearly energy balance sheets 1996-1998

    International Nuclear Information System (INIS)

    2000-01-01

    The objective of the presented statistics is to give a total picture of the Swedish energy supply and consumption 1996-1998. Compared to the regularly published energy balance sheets based on short periodic statistics, this publication is more disaggregated in the field of final energy consumption. The data are mainly based on yearly statistics on energy consumption in different sectors. The broad statistical base has made it possible to compile data for consumer categories on a fairly detailed level. In cases where direct statistical information is lacking or is insufficient, indirect calculation methods have been used for estimations or recalculations of basic statistics. Revisions and improvements of statistical sources as well as calculation methods will be performed successively. As a consequence of this, the statistics presented here could be revised in future publications

  15. The Spot Weldability of Carbon Steel Sheet

    Directory of Open Access Journals (Sweden)

    A. M. Al-Mukhtar

    2013-01-01

    Full Text Available The specimens of thickness 0.8 mm carbon steel number 1.8902 in a strip form were welded. The strips of lap joints and curved peeljoints configurations have been welded. The welding parameters such as weld current and weld time have been investigated. The relation between the weld area and the joint strength properties has been presented. The obtained results were showing that the weld joint strength and the molten area (weld nugget volume highly increase with the increasing of weld current. Therefore, the correlation between the maximum load (joint strength and area has been given. The reliable weldability under the tensile and shearing loading was considered. Therefore, the new limits of weldability have been presented to consider these two types of loading. Moreover, the experimental results were compared with the empirical relations that consider the sheet thickness only.

  16. Graphene: powder, flakes, ribbons, and sheets.

    Science.gov (United States)

    James, Dustin K; Tour, James M

    2013-10-15

    Graphene's unique physical and electrical properties (high tensile strength, Young's modulus, electron mobility, and thermal conductivity) have led to its nickname of "super carbon." Graphene research involves the study of several different physical forms of the material: powders, flakes, ribbons, and sheets and others not yet named or imagined. Within those forms, graphene can include a single layer, two layers, or ≤10 sheets of sp² carbon atoms. The chemistry and applications available with graphene depend on both the physical form of the graphene and the number of layers in the material. Therefore the available permutations of graphene are numerous, and we will discuss a subset of this work, covering some of our research on the synthesis and use of many of the different physical and layered forms of graphene. Initially, we worked with commercially available graphite, with which we extended diazonium chemistry developed to functionalize single-walled carbon nanotubes to produce graphitic materials. These structures were soluble in common organic solvents and were better dispersed in composites. We developed an improved synthesis of graphene oxide (GO) and explored how the workup protocol for the synthesis of GO can change the electronic structure and chemical functionality of the GO product. We also developed a method to remove graphene layers one-by-one from flakes. These powders and sheets of GO can serve as fluid loss prevention additives in drilling fluids for the oil industry. Graphene nanoribbons (GNRs) combine small width with long length, producing valuable electronic and physical properties. We developed two complementary syntheses of GNRs from multiwalled carbon nanotubes: one simple oxidative method that produces GNRs with some defects and one reductive method that produces GNRs that are less defective and more electrically conductive. These GNRs can be used in low-loss, high permittivity composites, as conductive reinforcement coatings on Kevlar

  17. Casimir interactions between graphene sheets and metamaterials

    International Nuclear Information System (INIS)

    Drosdoff, D.; Woods, Lilia M.

    2011-01-01

    The Casimir force between graphene sheets and metamaterials is studied. Theoretical results based on the Lifshitz theory for layered, planar, two-dimensional systems in media are presented. We consider graphene-graphene, graphene-metamaterial, and metal-graphene-metamaterial configurations. We find that quantum effects of the temperature-dependent force are not apparent until the submicron range. In contrast to results with bulk dielectric and bulk metallic materials, no Casimir repulsion is found when graphene is placed on top of a magnetically active metamaterial substrate, regardless of the strength of the low-frequency magnetic response. In the case of the metal-graphene-metamaterial setting, repulsion between the metamaterial and the metal-graphene system is possible only when the dielectric response from the metal contributes significantly.

  18. Saved by a material safety data sheet.

    Science.gov (United States)

    Lin, Ching-Hua; Du, Chung-Li; Chan, Chang-Chuan; Wang, Jung-Der

    2005-12-01

    We present the case of a young female laboratory worker who developed acute hepatic encephalopathy. To show that knowledge of occupational exposures to causative agents can alter therapeutic management. Although the patient was in a deep coma, her family members examined the workplace material safety data sheet, revealing exposure to chloroform. Since most chemical-induced hepatitis is self-limiting, a scheduled liver transplantation was postponed. The patient recovered. Subsequent air sampling suggested that the patient had been exposed to chloroform at a concentration of more than 15 ppm for 2 weeks. Our case report demonstrates the importance of obtaining an occupational history and how the patient's family can be important in this process.

  19. Data sheets on selected toxic elements

    International Nuclear Information System (INIS)

    Jaworski, J.F.

    1982-01-01

    The chemical elements considered in this volume have been identified as toxic to animal and vegetable life forms; however, these elements have not been studied as intensely as lead, mercury, cadmium, etc. Since, in most cases, existing data are insufficient to permit discussion and comparisons of relative quality, it was decided to present what quantitative data there are in as concise a manner as possible. The resulting data sheets present what is considered to be the best available information on the environmental levels, emissions and toxicology of these elements and some of their compounds. Reference is made to the article or review in which the datum appears and which may contain any discussion of the datum and the methods whereby it was obtained. Elements considered in this volume are antimony, barium, beryllium, bismuth, boron, cesium, gallium, germanium, indium, molybdenum, silver, tellurium, thallium, tin, uranium and zirconium

  20. Revised estimates of Greenland ice sheet thinning histories based on ice-core records

    DEFF Research Database (Denmark)

    Lecavalier, B.S.; Milne, G.A.; Fisher, D.A.

    2013-01-01

    -based reconstructions and, to some extent, the estimated elevation histories. A key component of the ice core analysis involved removing the influence of vertical surface motion on the dO signal measured from the Agassiz and Renland ice caps. We re-visit the original analysis with the intent to determine if the use...

  1. New aspects of plasma sheet dynamics - MHD and kinetic theory

    Directory of Open Access Journals (Sweden)

    H. Wiechen

    Full Text Available Magnetic reconnection is a process of fundamental importance for the dynamics of the Earth's plasma sheet. In this context, the development of thin current sheets in the near-Earth plasma sheet is a topic of special interest because they could be a possible cause of microscopic fluctuations acting as collective non-idealness from a macroscopic point of view. Simulations of the near-Earth plasma sheet including boundary perturbations due to localized inflow through the northern (or southern plasma sheet boundary show developing thin current sheets in the near-Earth plasma sheet about 810 RE tailwards of the Earth. This location is largely independent from the localization of the perturbation. The second part of the paper deals with the problem of the macroscopic non-ideal consequences of microscopic fluctuations. A new model is presented that allows the quantitative calculation of macroscopic non-idealness without considering details of microscopic instabilities or turbulence. This model is only based on the assumption of a strongly fluctuating, mixing dynamics on microscopic scales in phase space. The result of this approach is an expression for anomalous non-idealness formally similar to the Krook resistivity but now describing the macroscopic consequences of collective microscopic fluctuations, not of collisions.

    Key words. Magnetospheric physics (plasma sheet · Space plasma physics (kinetic and MHD theory; magnetic reconnection

  2. Spina Bifida. Fact Sheet = Espina Bifida. Hojas Informativas Sobre Discapacidades.

    Science.gov (United States)

    National Information Center for Children and Youth with Disabilities, Washington, DC.

    This fact sheet offers definitions of the three types of spina bifida (spina bifida occulta, meningocele, and myelomeningocele), outlines their incidence, describes characteristics of individuals with spina bifida, and reviews educational implications. The fact sheet discusses the need for many children with myelomeningocele to learn to manage…

  3. Modelling of failure in sheet forming using cohesive elements

    NARCIS (Netherlands)

    Wisselink, H.H.; Huetink, Han; Khalili, N; Valliappan, S; Li, Q; Russell, A

    2010-01-01

    Introduction: Shell elements are the most efficient method for large scale simulations of sheet metal forming or deformation of sheet products. These elements have a limited description of the kinematics. This is normally a good approximation of the real deformation, but it cannot describe the

  4. Thermal Transport Properties of Dry Spun Carbon Nanotube Sheets

    Directory of Open Access Journals (Sweden)

    Heath E. Misak

    2016-01-01

    Full Text Available The thermal properties of carbon nanotube- (CNT- sheet were explored and compared to copper in this study. The CNT-sheet was made from dry spinning CNTs into a nonwoven sheet. This nonwoven CNT-sheet has anisotropic properties in in-plane and out-of-plane directions. The in-plane direction has much higher thermal conductivity than the out-of-plane direction. The in-plane thermal conductivity was found by thermal flash analysis, and the out-of-plane thermal conductivity was found by a hot disk method. The thermal irradiative properties were examined and compared to thermal transport theory. The CNT-sheet was heated in the vacuum and the temperature was measured with an IR Camera. The heat flux of CNT-sheet was compared to that of copper, and it was found that the CNT-sheet has significantly higher specific heat transfer properties compared to those of copper. CNT-sheet is a potential candidate to replace copper in thermal transport applications where weight is a primary concern such as in the automobile, aircraft, and space industries.

  5. Laser altimetry reveals complex pattern of Greenland Ice Sheet dynamics

    DEFF Research Database (Denmark)

    Csatho, Beata M.; Schenk, Anton F.; van der Veen, Cornelis J.

    2014-01-01

    Significance We present the first detailed reconstruction of surface elevation changes of the Greenland Ice Sheet from NASA’s laser altimetry data. Time series at nearly 100,000 locations allow the characterization of ice sheet changes at scales ranging from individual outlet glaciers to larger...

  6. 10 CFR 609.8 - Term sheets and conditional commitments.

    Science.gov (United States)

    2010-01-01

    ... Project Sponsor and the Eligible Lender or other Holder express agreement with the terms and conditions... 10 Energy 4 2010-01-01 2010-01-01 false Term sheets and conditional commitments. 609.8 Section 609... EMPLOY INNOVATIVE TECHNOLOGIES § 609.8 Term sheets and conditional commitments. (a) DOE, after review and...

  7. Disruption of magnetospheric current sheet by quasi-electrostatic field

    Directory of Open Access Journals (Sweden)

    W. W. Liu

    2009-05-01

    Full Text Available Recent observational evidence has indicated that local current sheet disruptions are excited by an external perturbation likely associated with the kinetic ballooning (KB instability initiating at the transition region separating the dipole- and tail-like geometries. Specifically a quasi-electrostatic field pointing to the neutral sheet was identified in the interval between the arrival of KB perturbation and local current disruption. How can such a field drive the local current sheet unstable? This question is considered through a fluid treatment of thin current sheet (TCS where the generalized Ohm's law replaces the frozen-in-flux condition. A perturbation with the wavevector along the current is applied, and eigenmodes with frequency much below the ion gyrofrequency are sought. We show that the second-order derivative of ion drift velocity along the thickness of the current sheet is a critical stability parameter. In an E-field-free Harris sheet in which the drift velocity is constant, the current sheet is stable against this particular mode. As the electrostatic field grows, however, potential for instability arises. The threshold of instability is identified through an approximate analysis of the theory. For a nominal current sheet half-thickness of 1000 km, the estimated instability threshold is E~4 mV/m. Numerical solutions indicate that the two-fluid theory gives growth rate and wave period consistent with observations.

  8. Continental Ice Sheets and the Planetary Radiation Budget

    NARCIS (Netherlands)

    Oerlemans, J.

    1980-01-01

    The interaction between continental ice sheets and the planetary radiation budget is potentially important in climate-sensitivity studies. A simple ice-sheet model incorporated in an energybalance climate model provides a tool for studying this interaction in a quantitative way. Experiments in which

  9. Greenland Ice Sheet flow response to runoff variability

    NARCIS (Netherlands)

    Stevens, Laura A.; Behn, Mark D.; Das, Sarah B.; Joughin, Ian; Noël, Brice P Y; van den Broeke, Michiel R.; Herring, Thomas

    2016-01-01

    We use observations of ice sheet surface motion from a Global Positioning System network operating from 2006 to 2014 around North Lake in west Greenland to investigate the dynamical response of the Greenland Ice Sheet's ablation area to interannual variability in surface melting. We find no

  10. On the balance of stresses in the plasma sheet.

    Science.gov (United States)

    Rich, F. J.; Wolf, R. A.; Vasyliunas, V. M.

    1972-01-01

    The stress resulting from magnetic tension on the neutral sheet must, in a steady state, be balanced by any one or a combination of (1) a pressure gradient in the direction along the axis of the tail, (2) a similar gradient of plasma flow kinetic energy, and (3) the tension resulting from a pressure anisotropy within the plasma sheet. Stress balance in the first two cases requires that the ratios h/LX and BZ/BX be of the same order of magnitude, where h is the half-thickness of the neutral sheet, LX is the length scale for variations along the axis of the tail, and BZ and BX are the magnetic field components in the plasma sheet just outside the neutral sheet. The second case requires, in addition, that the plasma flow speed within the neutral sheet be of the order of or larger than the Alfven speed outside the neutral sheet. Stress balance in the third case requires that just outside the neutral sheet the plasma pressure obey the marginal firehose stability condition.

  11. Numerical simulation and fabrication of silicon sheet via spin casting.

    Science.gov (United States)

    Lee, Jaewoo; Kim, Hyunhui; Lee, Changbum; Kim, Joonsoo; Jang, Bo-Yun; Lee, Jinseok; Ahn, Youngsoo; Yoon, Wooyoung

    2013-05-01

    A spin-casting process for fabricating polycrystalline silicon sheets for use as solar cell wafers is proposed, and the parameters that control the sheet thickness are investigated. A numerical study of the fluidity of molten silicon indicates that the formation of thin silicon sheets without a mold and via spin casting is feasible. The faster the rotation speed of graphite mold, the thinner the thickness of sheet. After the spread of the molten silicon to cover the graphite mold with rotation speed of above 500 rpm, the solidification has to start. Silicon sheets can be produced by using the centrifugal force under appropriate experimental conditions. The spin-cast sheet had a vertical columnar microstructure due to the normal heat extraction to the substrate, and the sheet lifetime varied from 0.1 microS to 0.3 microS measured by using the microwave photoconductance decay (MW-PCD) to confirm that the spin-cast silicon sheet is applicable to photovoltaics.

  12. Comparative properties of ceramic-based roofing sheets from local ...

    African Journals Online (AJOL)

    Ceramic roofing sheets were fabricated in the laboratory by using ideal raw materials. The fabricating materials are coiled coconut fibre, palm fruit fibre, fresh water, river sand, polymeric dust, saw dust and cement. The resulting product was compared with factory -produced ceramic-based roofing sheets that are easily ...

  13. Corrosion Behavior of Brazed Zinc-Coated Structured Sheet Metal

    Directory of Open Access Journals (Sweden)

    A. Nikitin

    2017-01-01

    Full Text Available Arc brazing has, in comparison to arc welding, the advantage of less heat input while joining galvanized sheet metals. The evaporation of zinc is reduced in the areas adjacent to the joint and improved corrosion protection is achieved. In the automotive industry, lightweight design is a key technology against the background of the weight and environment protection. Structured sheet metals have higher stiffness compared to typical automobile sheet metals and therefore they can play an important role in lightweight structures. In the present paper, three arc brazing variants of galvanized structured sheet metals were validated in terms of the corrosion behavior. The standard gas metal arc brazing, the pulsed arc brazing, and the cold metal transfer (CMT® in combination with a pulsed cycle were investigated. In experimental climate change tests, the influence of the brazing processes on the corrosion behavior of galvanized structured sheet metals was investigated. After that, the corrosion behavior of brazed structured and flat sheet metals was compared. Because of the selected lap joint, the valuation of damage between sheet metals was conducted. The pulsed CMT brazing has been derived from the results as the best brazing method for the joining process of galvanized structured sheet metals.

  14. Silicon Sheet Quality is Improved By Meniscus Control

    Science.gov (United States)

    Yates, D. A.; Hatch, A. E.; Goldsmith, J. M.

    1983-01-01

    Better quality silicon crystals for solar cells are possible with instrument that monitors position of meniscus as sheet of solid silicon is drawn from melt. Using information on meniscus height, instrument generates feedback signal to control melt temperature. Automatic control ensures more uniform silicon sheets.

  15. Adaptive numerical analysis of wrinkling in sheet metal forming

    NARCIS (Netherlands)

    Selman, A.; Meinders, Vincent T.; van den Boogaard, Antonius H.; Huetink, Han

    2003-01-01

    Hutchinson approach has been successfully used by a number of researchers in thin sheet metal forming processes for wrinkling prediction. However, Hutchinson approach is limited to regions of the sheet that are free of any contact. Therefore, a new wrinkling indicator that can be used in the contact

  16. FEM Analysis on Electromagnetic Processing of Thin Metal Sheets

    Directory of Open Access Journals (Sweden)

    PASCA Sorin

    2014-10-01

    Full Text Available Based on finite element analysis, this paper investigates a possible new technology for electromagnetic processing of thin metal sheets, in order to improve the productivity, especially on automated manufacturing lines. This technology consists of induction heating process followed by magnetoforming process, both applied to metal sheet, using the same tool coil for both processes.

  17. Optimal Design of Sheet Pile Wall Embedded in Clay

    Science.gov (United States)

    Das, Manas Ranjan; Das, Sarat Kumar

    2015-09-01

    Sheet pile wall is a type of flexible earth retaining structure used in waterfront offshore structures, river protection work and temporary supports in foundations and excavations. Economy is an essential part of a good engineering design and needs to be considered explicitly in obtaining an optimum section. By considering appropriate embedment depth and sheet pile section it may be possible to achieve better economy. This paper describes optimum design of both cantilever and anchored sheet pile wall penetrating clay using a simple optimization tool Microsoft Excel ® Solver. The detail methodology and its application with examples are presented for cantilever and anchored sheet piles. The effects of soil properties, depth of penetration and variation of ground water table on the optimum design are also discussed. Such a study will help professional while designing the sheet pile wall penetrating clay.

  18. Mountain building and the initiation of the Greenland Ice Sheet

    DEFF Research Database (Denmark)

    Solgaard, Anne Munck; Bonow, Johan; Langen, Peter Lang

    2013-01-01

    The effects of a new hypothesis about mountain building in Greenland on ice sheet initiation are investigated using an ice sheet model in combination with a climate model. According to this hypothesis, low-relief landscapes near sea level characterised Greenland in Miocene times until two phases...... superimposed by cold and warm excursions. The modelling results show that no ice initiates in the case of the low-lying and almost flat topography prior to the uplifts. However, the results demonstrate a significant ice sheet growth in response to the orographically induced increase in precipitation...... sheet by providing anchoring points which are not available to the same extent in the lower topographies. However, the results also reveal a Föhn effect that inhibits ice sheet expansion into the interior Greenland and thus shifts the threshold of formation of inland ice towards colder temperatures...

  19. Pattern transitions in a compressible floating elastic sheet.

    Science.gov (United States)

    Oshri, Oz; Diamant, Haim

    2017-09-13

    Thin rigid sheets floating on a liquid substrate appear, for example, in coatings and surfactant monolayers. Upon uniaxial compression the sheet undergoes transitions from a compressed flat state to a periodic wrinkled pattern to a localized folded pattern. The stability of these states is determined by the in-plane elasticity of the sheet, its bending rigidity, and the hydrostatics of the underlying liquid. Wrinkles and folds, and the wrinkle-to-fold transition, were previously studied for incompressible sheets. In the present work we extend the theory to include finite compressibility. We analyze the details of the flat-to-wrinkle transition, the effects of compressibility on wrinkling and folding, and the compression field associated with pattern formation. The state diagram of the floating sheet including all three states is presented.

  20. Pengaruh Rendaman Air Laut terhadap Kapasitas Rekatan GFRP-Sheet pada Balok Beton Bertulang

    Directory of Open Access Journals (Sweden)

    Mufti Amir Sultan

    2017-04-01

    Full Text Available Construction of concrete structures that located in extreme environments are such as coastal areas will result in decreased strength or even the damage of the structures. As well know, chloride contained in sea water is responsible for strength reduction or structure failed were hence maintenance and repairs on concrete structure urgently needed. One popular method of structural improvements which under investigation is to use the material Glass Fiber Reinforced Polymer which has one of the advantages such as corrosion resistance. This research will be conducted experimental studies to investigate the flexural behavior of reinforced concrete beams with reinforcement GFRP-Sheet immersed in sea water using immersion time of 1, 3, 6 and 12 months. Test specimen consists of 11 pieces of reinforced beams with dimensions (15x20x330 cm that had been reinforced with GFRPSheet in the area of bending. The test specimen tested by providing a static load until it reaches the power limit, to record data during the test strain gauge mounted on the surface of the specimen and the GFRP-Sheet to collect the strain value. The result of analysis indicates the bonding capacity of GFRP Sheet decreases about 11.04% after immersed for 12 months in sea water.

  1. Spina Bifida: General Information. Fact Sheet Number 12 = La Espina Bifida: Informacion General. Fact Sheet Number 12.

    Science.gov (United States)

    National Information Center for Children and Youth with Disabilities, Washington, DC.

    This fact sheet offers definitions of the three types of spina bifida, outlines their incidence, describes characteristics of individuals with spina bifida, and reviews educational implications. The fact sheet emphasizes that school programs should be flexible to accommodate these students' special needs and frequent absences, that children with…

  2. Cerebral Palsy: General Information. Fact Sheet Number 2 = La Paralisis Cerebral: Informacion General. Fact Sheet Number 18.

    Science.gov (United States)

    Interstate Research Associates, McLean, VA.

    This fact sheet on cerebral palsy is offered in both English and Spanish. First, it provides a definition and considers various causes (e.g., an insufficient amount of oxygen reaching the fetal or newborn brain). The fact sheet then offers incidence figures and explains characteristics of the three main types of cerebral palsy: spastic, athetoid,…

  3. 49 CFR 236.338 - Mechanical locking required in accordance with locking sheet and dog chart.

    Science.gov (United States)

    2010-10-01

    ... locking sheet and dog chart. 236.338 Section 236.338 Transportation Other Regulations Relating to... in accordance with locking sheet and dog chart. Mechanical locking shall be in accordance with locking sheet and dog chart currently in effect. ...

  4. Surgical medical record

    DEFF Research Database (Denmark)

    Bulow, S.

    2008-01-01

    A medical record is presented on the basis of selected linguistic pearls collected over the years from surgical case records Udgivelsesdato: 2008/12/15......A medical record is presented on the basis of selected linguistic pearls collected over the years from surgical case records Udgivelsesdato: 2008/12/15...

  5. Radar Detection of Layering in Ice: Experiments on a Constructed Layered Ice Sheet

    Science.gov (United States)

    Carter, L. M.; Koenig, L.; Courville, Z.; Ghent, R. R.; Koutnik, M. R.

    2016-12-01

    The polar caps and glaciers of both Earth and Mars display internal layering that preserves a record of past climate. These layers are apparent both in optical datasets (high resolution images, core samples) and in ground penetrating radar (GPR) data. On Mars, the SHARAD (Shallow Radar) radar on the Mars Reconnaissance Orbiter shows fine layering that changes spatially and with depth across the polar caps. This internal layering has been attributed to changes in fractional dust contamination due to obliquity-induced climate variations, but there are other processes that can lead to internal layers visible in radar data. In particular, terrestrial sounding of ice sheets compared with core samples have revealed that ice density and composition differences account for the majority of the radar reflectors. The large cold rooms and ice laboratory facility at the U.S. Army Cold Regions Research and Engineering Laboratory (CRREL) provide us a unique opportunity to construct experimental ice sheets in a controlled setting and measure them with radar. In a CRREL laboratory, we constructed a layered ice sheet that is 3-m deep with a various snow and ice layers with known dust concentrations (using JSC Mars-1 basaltic simulant) and density differences. These ice sheets were profiled using a commercial GPR, at frequencies of 200, 400 and 900 MHz, to determine how the radar profile changes due to systematic and known changes in snow and ice layers, including layers with sub-wavelength spacing. We will report results from these experiments and implications for interpreting radar-detected layering in ice on Earth and Mars.

  6. VISL: A Virtual Ice Sheet Laboratory For Outreach and K-12 Education

    Science.gov (United States)

    Cheng, D. L. C.; Halkides, D. J.; Larour, E. Y.; Moore, J.; Dunn, S.; Perez, G.

    2015-12-01

    We present an update on our developing Virtual Ice Sheet Laboratory (VISL). Geared to K-12 classrooms and the general public, VISL's main goal is to improve climate literacy, especially in regards to the crucial role of the polar ice sheets in Earth's climate and sea level. VISL will allow users to perform guided experiments using the Ice Sheet System Model (ISSM), a state-of-the-art ice flow model developed at NASA's Jet Propulsion Laboratory and UC Irvine that simulates the near-term evolution of the ice sheets on Greenland and Antarctica. VISL users will access ISSM via a graphical interface that can be launched from a web browser on a computer, tablet or smart phone. Users select climate conditions and run time by moving graphic sliders then watch how a given region evolves in time under those conditions. Lesson plans will include conceptual background, instructions for table top experiments related to the concepts addressed in a given lesson, and a guide for performing model experiments and interpreting their results. Activities with different degrees of complexity will aim for consistency with NGSS Physical Science criteria for different grade bands (K-2, 3-5, 6-8, and 9-12), although they will not be labeled as such to encourage a broad user base. Activities will emphasize the development of physical intuition and critical thinking skills, understanding conceptual and computational models, as well as observation recording, concept articulation, hypothesis formulation and testing, and mathematical analysis. At our present phase of development, we seek input from the greater science education and outreach communities regarding VISL's planned content, as well as additional features and topic areas that educators and students would find useful.

  7. Efficient meltwater drainage through supraglacial streams and rivers on the southwest Greenland ice sheet.

    Science.gov (United States)

    Smith, Laurence C; Chu, Vena W; Yang, Kang; Gleason, Colin J; Pitcher, Lincoln H; Rennermalm, Asa K; Legleiter, Carl J; Behar, Alberto E; Overstreet, Brandon T; Moustafa, Samiah E; Tedesco, Marco; Forster, Richard R; LeWinter, Adam L; Finnegan, David C; Sheng, Yongwei; Balog, James

    2015-01-27

    Thermally incised meltwater channels that flow each summer across melt-prone surfaces of the Greenland ice sheet have received little direct study. We use high-resolution WorldView-1/2 satellite mapping and in situ measurements to characterize supraglacial water storage, drainage pattern, and discharge across 6,812 km(2) of southwest Greenland in July 2012, after a record melt event. Efficient surface drainage was routed through 523 high-order stream/river channel networks, all of which terminated in moulins before reaching the ice edge. Low surface water storage (3.6 ± 0.9 cm), negligible impoundment by supraglacial lakes or topographic depressions, and high discharge to moulins (2.54-2.81 cm⋅d(-1)) indicate that the surface drainage system conveyed its own storage volume every importance of supraglacial river drainage to true outflow from the ice edge. However, Isortoq discharges tended lower than runoff simulations from the Modèle Atmosphérique Régional (MAR) regional climate model (0.056-0.112 km(3)⋅d(-1) vs. ∼0.103 km(3)⋅d(-1)), and when integrated over the melt season, totaled just 37-75% of MAR, suggesting nontrivial subglacial water storage even in this melt-prone region of the ice sheet. We conclude that (i) the interior surface of the ice sheet can be efficiently drained under optimal conditions, (ii) that digital elevation models alone cannot fully describe supraglacial drainage and its connection to subglacial systems, and (iii) that predicting outflow from climate models alone, without recognition of subglacial processes, may overestimate true meltwater export from the ice sheet to the ocean.

  8. Observations of runoff and sediment and dissolved loads from the Greenland Ice Sheet at Kangerlussuaq, West Greenland, 2007 to 2010

    DEFF Research Database (Denmark)

    Hasholt, Bent; Mikkelsen, Andreas Peter Bech; Nielsen, Morten Holtegaard

    2012-01-01

    Observations from 2007 to 2010 of runoff, sediment and solute delivery from a segment of the Greenland Ice Sheet (GrIS) and the proglacial landscape draining into the fjord at Kangerlussuaq are presented. The observations include at least three jökulhlaups and extreme recordings from 2010.......g. Norway. The sandur in the proglacial area acts as a sediment sink for a lot of the sediments from the GrIS....

  9. The late Cainozoic East Antarctic ice sheet

    International Nuclear Information System (INIS)

    Colhoun, E.A.

    1999-01-01

    A review, mainly of East Antarctic late Cainozoic (post 40 Ma) geological and geomorphological evidence, supports the hypothesis of the continuous presence of an ice sheet, of about the present size, since the late Miocene. Evidence is presented and the view advanced that, during the late Wisconsin maximum of isotope stage 2, ice was not nearly as thick or extensive over the continental shelf as required by the model of 'maximum' Antarctic glaciation. Some of the factors influencing the contribution of Antarctica to post-glacial sea-level rise are discussed. It is considered that Antarctica's contribution was probably considerably less than previously estimated. The dating of marine and freshwater sequences in the Vestfold and Bunger Hills is consistent with deglaciation around the Pleistocene Holocene boundary, after the Late Wisconsin maximum. A date of ∼25 ka BP from permafrost in the Larsemann Hills means that either the Larsemann Hills were not glaciated during the Late Wisconsin or the ice failed to erode much of the permafrost surface. The degree of weathering of rock and glacial drifts in the Vestfold, Larsemann and Bunger Hills suggests a long time for formation, perhaps considerably longer than indicated by the dated marine and freshwater sediment sequences. Cosmogenic isotope dating in the Vestfold Hills has provided equivocal ages for deglaciation. While the results could indicate deglaciation before 80 ka BP, they do not confirm such early deglaciation. If the ice cover was thin and failed to remove the previous rock exposure profile, then the assays could predate the last ice advance. Weathered iron crust fragments in the till suggest little erosion. The raised beaches of the oases are Holocene. Assuming they have been produced by post Late Wisconsin isostatic uplift and by the Holocene transgression, calculations show that the Antarctic continental ice sheet could not have been more than ∼500 m thicker in the inner shelf-coastal zone. The

  10. A laser sheet self-calibration method for scanning PIV

    Science.gov (United States)

    Knutsen, Anna N.; Lawson, John M.; Dawson, James R.; Worth, Nicholas A.

    2017-10-01

    Knowledge of laser sheet position, orientation, and thickness is a fundamental requirement of scanning PIV and other laser-scanning methods. This paper describes the development and evaluation of a new laser sheet self-calibration method for stereoscopic scanning PIV, which allows the measurement of these properties from particle images themselves. The approach is to fit a laser sheet model by treating particles as randomly distributed probes of the laser sheet profile, whose position is obtained via a triangulation procedure enhanced by matching particle images according to their variation in brightness over a scan. Numerical simulations and tests with experimental data were used to quantify the sensitivity of the method to typical experimental error sources and validate its performance in practice. The numerical simulations demonstrate the accurate recovery of the laser sheet parameters over range of different seeding densities and sheet thicknesses. Furthermore, they show that the method is robust to significant image noise and camera misalignment. Tests with experimental data confirm that the laser sheet model can be accurately reconstructed with no impairment to PIV measurement accuracy. The new method is more efficient and robust in comparison with the standard (self-) calibration approach, which requires an involved, separate calibration step that is sensitive to experimental misalignments. The method significantly improves the practicality of making accurate scanning PIV measurements and broadens its potential applicability to scanning systems with significant vibrations.

  11. Stiffness Matrices and Anisotropy in the Trapezoidal Corrugated Composite Sheets

    Directory of Open Access Journals (Sweden)

    Mohammad Golzar

    2013-10-01

    Full Text Available In the some applications like as morphing technology, high strain and anisotropic behavior are essential design requirements. The corrugated composite sheets due to their special geometries have potential to high deflection under axial loading through longitudinal direction of corrugation. In this research, the strain and the anisotropic behavior of corrugated composite sheets are investigated by fabricating glass/epoxy samples with trapezoidal geometries. For evaluation of the mechanical behavior of the composites the samples were subjected to tension and flexural tests in the longitudinal and transverse directions of corrugation. In order to determine anisotropic behavior of the corrugated sheets, two approaches were introduced: (1 tensile anisotropic (E* and (2 flexural anisotropic (D*. The anisotropic behavior and ultimate deflections were investigated theoretically and experimentally. In this paper, mechanical behaviors based on theoretical and experimental analysis including the elastic constants and stiffness matrices of trapezoidal corrugated composite sheets were studied and the results were verified by finite element method. The results of the numerical and analytical solutions were compared with those of experimental tests. Finally, the load-displacement curves of tensile tests in longitudinal direction of corrugation, the ultimate deflection and anisotropy behavior of these exclusive composite sheets in the corrugated composite sheets were studied experimentally. The experimental results of the trapezoidal corrugated sheets showed that one of the most important parameters in the ultimate strain was amplitude of the corrugation elements. Generally, increasing the amplitude and element per length unit of trapezoidal corrugated specimen led to higher ultimate strain.

  12. Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets

    Directory of Open Access Journals (Sweden)

    Navid Mohammad Nejad Fard

    2017-06-01

    Full Text Available An Al/Stainless Steel/Al lamellar composite was produced by roll bonding of the starting sheets at 400 °C. Afterward, the roll bonded sheet was cut in half and the accumulative roll bonding (ARB process at room temperature was applied seven times. As a result, the central steel layer fractured and distributed in the Al matrix among different layers introduced by the repetition of roll bonding process. The tensile results showed that the roll bonded sheet has much higher strength and strength to weight ratio compared with the initial aluminum sheet as a result of the presence of continuous steel core. However, poor ductility properties were observed during tensile test, which were ascribed to the increasing deformation resistance and localized thinning of the central stainless steel sheet during the roll bonding process. The ARBed sample exhibited lower strength compared with the roll bonded sheet due to the breakup of stainless steel layer into many small segments. Anyway, an ultrafine grained microstructure with average grain size of 400 nm in the aluminum matrix and 71% strain-induced martensite in the steel segments were detected by the electron backscattered diffraction (EBSD technique, which were found to be responsible for the enhancement of mechanical properties compared with the initial aluminum sheet.

  13. Influence of temperature fluctuations on equilibrium ice sheet volume

    Science.gov (United States)

    Bøgeholm Mikkelsen, Troels; Grinsted, Aslak; Ditlevsen, Peter

    2018-01-01

    Forecasting the future sea level relies on accurate modeling of the response of the Greenland and Antarctic ice sheets to changing temperatures. The surface mass balance (SMB) of the Greenland Ice Sheet (GrIS) has a nonlinear response to warming. Cold and warm anomalies of equal size do not cancel out and it is therefore important to consider the effect of interannual fluctuations in temperature. We find that the steady-state volume of an ice sheet is biased toward larger size if interannual temperature fluctuations are not taken into account in numerical modeling of the ice sheet. We illustrate this in a simple ice sheet model and find that the equilibrium ice volume is approximately 1 m SLE (meters sea level equivalent) smaller when the simple model is forced with fluctuating temperatures as opposed to a stable climate. It is therefore important to consider the effect of interannual temperature fluctuations when designing long experiments such as paleo-spin-ups. We show how the magnitude of the potential bias can be quantified statistically. For recent simulations of the Greenland Ice Sheet, we estimate the bias to be 30 Gt yr-1 (24-59 Gt yr-1, 95 % credibility) for a warming of 3 °C above preindustrial values, or 13 % (10-25, 95 % credibility) of the present-day rate of ice loss. Models of the Greenland Ice Sheet show a collapse threshold beyond which the ice sheet becomes unsustainable. The proximity of the threshold will be underestimated if temperature fluctuations are not taken into account. We estimate the bias to be 0.12 °C (0.10-0.18 °C, 95 % credibility) for a recent estimate of the threshold. In light of our findings it is important to gauge the extent to which this increased variability will influence the mass balance of the ice sheets.

  14. Theoretical Predictions of Freestanding Honeycomb Sheets of Cadmium Chalcogenides

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Jia [ORNL; Huang, Jingsong [ORNL; Sumpter, Bobby G [ORNL; Kent, Paul R [ORNL; Xie, Yu [ORNL; Terrones Maldonado, Humberto [ORNL; Smith, Sean C [ORNL

    2014-01-01

    Two-dimensional (2D) nanocrystals of CdX (X = S, Se, Te) typically grown by colloidal synthesis are coated with organic ligands. Recent experimental work on ZnSe showed that the organic ligands can be removed at elevated temperature, giving a freestanding 2D sheet of ZnSe. In this theoretical work, freestanding single- to few-layer sheets of CdX, each possessing a pseudo honeycomb lattice, are considered by cutting along all possible lattice planes of the bulk zinc blende (ZB) and wurtzite (WZ) phases. Using density functional theory, we have systematically studied their geometric structures, energetics, and electronic properties. A strong surface distortion is found to occur for all of the layered sheets, and yet all of the pseudo honeycomb lattices are preserved, giving unique types of surface corrugations and different electronic properties. The energetics, in combination with phonon mode calculations and molecular dynamics simulations, indicate that the syntheses of these freestanding 2D sheets could be selective, with the single- to few-layer WZ110, WZ100, and ZB110 sheets being favored. Through the GW approximation, it is found that all single-layer sheets have large band gaps falling into the ultraviolet range, while thicker sheets in general have reduced band gaps in the visible and ultraviolet range. On the basis of the present work and the experimental studies on freestanding double-layer sheets of ZnSe, we envision that the freestanding 2D layered sheets of CdX predicted herein are potential synthesis targets, which may offer tunable band gaps depending on their structural features including surface corrugations, stacking motifs, and number of layers.

  15. Kinetic Studies of Thin Current Sheets at Magnetosheath Jets

    Science.gov (United States)

    Eriksson, E.; Vaivads, A.; Khotyaintsev, Y. V.; Graham, D. B.; Yordanova, E.; Hietala, H.; Markidis, S.; Giles, B. L.; Andre, M.; Russell, C. T.; Le Contel, O.; Burch, J. L.

    2017-12-01

    In near-Earth space one of the most turbulent plasma environments is the magnetosheath (MSH) downstream of the quasi-parallel shock. The particle acceleration and plasma thermalization processes there are still not fully understood. Regions of strong localized currents are believed to play a key role in those processes. The Magnetospheric Multiscale (MMS) mission has sufficiently high cadence to study these processes in detail. We present details of studies of two different events that contain strong current regions inside the MSH downstream of the quasi-parallel shock. In both cases the shape of the current region is in the form of a sheet, however they show internal 3D structure on the scale of the spacecraft separation (15 and 20 km, respectively). Both current sheets have a normal magnetic field component different from zero indicating that the regions at the different sides of the current sheets are magnetically connected. Both current sheets are boundaries between two different plasma regions. Furthermore, both current sheets are observed at MSH jets. These jets are characterized by localized dynamic pressure being larger than the solar wind dynamic pressure. One current sheet does not seem to be reconnecting while the other shows reconnection signatures. Inside the non-reconnecting current sheet we observe locally accelerated electron beams along the magnetic field. At energies above the beam energy we observe a loss cone consistent with part of the hot MSH-like electrons escaping into the colder solar wind-like plasma. This suggests that the acceleration process within this current sheet is similar to the one that occurs at the bow shock, where electron beams and loss cones are also observed. Therefore, we conclude that electron beams observed in the MSH do not have to originate from the bow shock, but can also be generated locally inside the MSH. The reconnecting current sheet also shows signs of thermalization and electron acceleration processes that are

  16. Seung-Nelson representation for singular thin sheets

    Science.gov (United States)

    Witten, Thomas; Wang, Jin

    2011-03-01

    We extend the popular Seung-Nelson model to better study thin elastic sheets with singular or multi-scale structures, which are common phenomena in thin sheets. Because it requires a uniform distribution of lattice points over the simulated sheets, the original model is ill-equipped to study these singular structures. Our extended model retains the essence of the original one, but it allows lattice points to be concentrated as needed in regions of large curvatures. We will compare the two methods by applying them to study the energy of the core region of a developable cone. Supported by NSF award DMR 0820054.

  17. An experimental study on superplastic behaviors of magnesium alloy sheet

    Energy Technology Data Exchange (ETDEWEB)

    Jin Quanlin; Wu Huiying [Beijing Research Inst. of Mechanical and Electrical Technology (China)

    2005-07-01

    An experimental study on superplastic forming behaviors and microstructure characters of commercial magnesium alloy sheet AZ31B is presented in this paper. The main experimental results show that the commercial magnesium alloy AZ31B sheet has superplastic capability. For the received sheet without any pre-processing, the maximum elongation is 295%. The dynamic recrystallization and grain refinement can be found. The superplastic behaviors can be improved by controlling the dynamic recrystallization and grain refinement. Some experimental results of free superplastic bulging are presented in this paper. The results show that influence of temperature on forming capability is much less than the influences of temperature on elongation. (orig.)

  18. THE MOTRU MINING BASIN – GIS APPLICATION ON SHEET EROSION

    Directory of Open Access Journals (Sweden)

    Anghel TITU

    2008-05-01

    Full Text Available The Motru Mining Basin – GIS Application on Sheet Erosion. The activation of the sheet erosion has important negative effects upon the soil profile. The anticipation of this geomorphologic process is important for taking some measures for protecting the susceptible areas. Within our study, we will carry out a quantitative estimation of the soil losses in the Motru Mining Basin, caused by the activation of the sheet erosion mechanism. We will apply the classic methodology proposed by the ROMSEM model of the USLE type by using the GIS technology

  19. New technology for the production of magnesium strips and sheets

    Directory of Open Access Journals (Sweden)

    R. Kawalla

    2008-07-01

    Full Text Available A new production technology for magnesium strip, based on twin-roll-casting and strip rolling was developed in Freiberg Germany. By means of this economic method it is possible to produce strips in deep drawing quality with good forming properties in order to satisfy the request for low cost Mg sheets in the automotive and electronic industry. Both, coils as single sheets, were manufactured and rolled to a thickness of 1mm(0,5 mm. The technology of the new process and the properties of the twin-roll-casted material and the final sheets are presented.

  20. Active Vibration Control of a Thin Steel Sheet

    Directory of Open Access Journals (Sweden)

    Yohji Okada

    1995-01-01

    Full Text Available The commercial rolling process used in the steel industry to manufacture thin steel sheets tends to cause plate vibrations that lower the quality of the surface finish. This article introduces a noncontact method of active vibration control for reducing the flexural vibrations of a thin steel sheet. The proposed electromagnetic method of control has been implemented in a simple experimental setup where the signal from a motion sensor regulates the attractive force of the magnets that produce a damping force on the steel sheet.

  1. Functionalised graphene sheets as effective high dielectric constant fillers

    Directory of Open Access Journals (Sweden)

    Romasanta Laura

    2011-01-01

    Full Text Available Abstract A new functionalised graphene sheet (FGS filled poly(dimethylsiloxane insulator nanocomposite has been developed with high dielectric constant, making it well suited for applications in flexible electronics. The dielectric permittivity increased tenfold at 10 Hz and 2 wt.% FGS, while preserving low dielectric losses and good mechanical properties. The presence of functional groups on the graphene sheet surface improved the compatibility nanofiller/polymer at the interface, reducing the polarisation process. This study demonstrates that functionalised graphene sheets are ideal nanofillers for the development of new polymer composites with high dielectric constant values. PACS: 78.20.Ci, 72.80.Tm, 62.23.Kn

  2. Bringing Sheet Music to Life: My Experiences with OMR

    Directory of Open Access Journals (Sweden)

    Andrew Bullen

    2008-06-01

    Full Text Available This article describes the process of digitizing sheet music celebrating Pullman porters and rail travel from the 1870s-1920s. The process involves 1 digitizing sheet music, 2 running the digitized sheet music through an Optical Musical Recognition (OMR software package, 3cleaning up the resulting file, 4 converting it into an .mp3/MIDI file, and 5 tweaking it to use the voices/instruments of a music editing software program. The pros and cons of some popular OMR programs are discussed.

  3. Efficient tunable luminescence of SiGe alloy sheet polymers

    International Nuclear Information System (INIS)

    Vogg, G.; Meyer, A. J.-P.; Miesner, C.; Brandt, M. S.; Stutzmann, M.

    2001-01-01

    Crystalline SiGe alloy sheet polymers were topotactically prepared from epitaxially grown calcium germanosilicide Ca(Si 1-x Ge x ) 2 precursor films in the whole composition range. These polygermanosilynes are found to be a well-defined mixture of the known siloxene and polygermyne sheet polymers with the OH groups exclusively bonded to silicon. The optical properties determined by photoluminescence and optical reflection measurements identify the mixed SiGe sheet polymers as direct semiconductors with efficient luminescence tunable in the energy range between 2.4 and 1.3 eV. [copyright] 2001 American Institute of Physics

  4. Multi-scale magnetic field intermittence in the plasma sheet

    Directory of Open Access Journals (Sweden)

    Z. Vörös

    2003-09-01

    Full Text Available This paper demonstrates that intermittent magnetic field fluctuations in the plasma sheet exhibit transitory, localized, and multi-scale features. We propose a multifractal-based algorithm, which quantifies intermittence on the basis of the statistical distribution of the "strength of burstiness", estimated within a sliding window. Interesting multi-scale phenomena observed by the Cluster spacecraft include large-scale motion of the current sheet and bursty bulk flow associated turbulence, interpreted as a cross-scale coupling (CSC process.Key words. Magnetospheric physics (magnetotail; plasma sheet – Space plasma physics (turbulence

  5. Nuclear Data Sheets for A = 166

    Energy Technology Data Exchange (ETDEWEB)

    Baglin, Coral M.

    2008-05-01

    Nuclear structure data pertaining to all known A = 166 nuclides (Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, W, Re, Os, Ir, Pt) have been compiled and evaluated, and incorporated into the ENSDF data file. This evaluation for A = 166 supersedes the previous publication (E.N. Shurshikov and N.V. Timofeeva, Nuclear Data Sheets 67, 45 (1992) (literature cutoff date 1 October 1990)) and the revision by C.M. Baglin of {sup 166}W (literature cutoff data 16 April 2000). It includes literature available by 1 March 2008. Subsequent to the previous evaluation, {sup 166}Gd has been observed for the first time and the first observations of excited states in {sup 166}Tb, {sup 166}Re, {sup 166}Os and {sup 166}Ir have been reported: also, knowledge of collective structure in {sup 166}Dy. {sup 166}Ho, {sup 1676}Er, {sup 166}Tm, {sup 166}Yb, {sup 166}Lu, {sup 166}Hf, and {sup 166}Ta has been considerably expanded. However, the structure suggested here for {sup 166}Re is highly tentative and a further, more detailed study of {alpha} decay into (and out of) {sup 166}Re could be informative.

  6. Tribo-systems for Sheet Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels

    2009-01-01

    The present paper gives an overview of more than 10 years work by the author’s research group through participation in national as well as international framework programmes on developing and testing environmentally friendly lubricants and tool materials and coatings inhibiting galling. Partners ......’s research group has especially been involved in the development of a system of tribo-tests for sheet metal forming and in testing and modelling of friction and limits of lubrication of new, environmentally friendly lubricants and tool materials.......The present paper gives an overview of more than 10 years work by the author’s research group through participation in national as well as international framework programmes on developing and testing environmentally friendly lubricants and tool materials and coatings inhibiting galling. Partners...... in the programmes come from Germany, United Kingdom, Finland, Poland, Slovenia, Spain and Denmark. They represent lubricant developers, testing experts and industrial end users as well as numerical modelling experts simulating fundamental lubrication mechanisms and computing basic process parameters. The author...

  7. Non-Heat Treatable Alloy Sheet Products

    Energy Technology Data Exchange (ETDEWEB)

    Hayden, H.W.; Barthold, G.W.; Das, S.K.

    1999-08-01

    ALCAR is an innovative approach for conducting multi-company, pre-competitive research and development programs. ALCAR has been formed to crate a partnership of aluminum producers, the American Society of Mechanical Engineers Center for Research and Technology Development (ASME/CRTD), the United States Department of Energy (USDOE), three USDOE National Laboratories, and a Technical Advisory Committee for conducting cooperative, pre-competitive research on the development of flower-cost, non-heat treated (NHT) aluminum alloys for automotive sheet applications with strength, formability and surface appearance similar to current heat treated (HT) aluminum alloys under consideration. The effort has been supported by the USDOE, Office of Transportation Technology (OTT) through a three-year program with 50/50 cost share at a total program cost of $3 million. The program has led to the development of new and modified 5000 series aluminum ally compositions. Pilot production-size ingots have bee n melted, cast, hot rolled and cold rolled. Stamping trials on samples of rolled product for demonstrating production of typical automotive components have been successful.

  8. Greenland ice sheet mass balance: a review.

    Science.gov (United States)

    Khan, Shfaqat A; Aschwanden, Andy; Bjørk, Anders A; Wahr, John; Kjeldsen, Kristian K; Kjær, Kurt H

    2015-04-01

    Over the past quarter of a century the Arctic has warmed more than any other region on Earth, causing a profound impact on the Greenland ice sheet (GrIS) and its contribution to the rise in global sea level. The loss of ice can be partitioned into processes related to surface mass balance and to ice discharge, which are forced by internal or external (atmospheric/oceanic/basal) fluctuations. Regardless of the measurement method, observations over the last two decades show an increase in ice loss rate, associated with speeding up of glaciers and enhanced melting. However, both ice discharge and melt-induced mass losses exhibit rapid short-term fluctuations that, when extrapolated into the future, could yield erroneous long-term trends. In this paper we review the GrIS mass loss over more than a century by combining satellite altimetry, airborne altimetry, interferometry, aerial photographs and gravimetry data sets together with modelling studies. We revisit the mass loss of different sectors and show that they manifest quite different sensitivities to atmospheric and oceanic forcing. In addition, we discuss recent progress in constructing coupled ice-ocean-atmosphere models required to project realistic future sea-level changes.

  9. Combined Radiation Belt - Plasma Sheet System Modeling

    Science.gov (United States)

    Aseev, Nikita; Shprits, Yuri; Kellerman, Adam; Drozdov, Alexander; Zhu, Hui

    2017-04-01

    Recent years have given rise to numerous mathematical models of the Earth's radiation belt dynamics. Driven by observations at geosynchronous orbit (GEO) where satellites (e.g. GOES and LANL) provide extensive in-situ measurements, radiation belt models usually take into account only diffusion processes in the energetic electron belts (100 keV and greater), leaving aside the dynamics of colder source population (tens of keV). Such models are able to reconstruct the radiation belt state, but they are not capable of predicting the electron dynamics at GEO, where many communication and navigation satellites currently operate. In this work we present combined four-dimensional electron radiation belt - plasma sheet model accounting for adiabatic advective transport, radial diffusion due to interaction with ULF waves, local acceleration of electrons, scattering into the atmosphere, magnetopause shadowing, and adiabatic effects due to contraction and expansion of the magnetic field. The developed model is applicable to energetic, relativistic and ultrarelativistic electrons as well as to source electron population. The model provides spatial particle distribution allowing us to compare and validate the model with multiple satellite measurements at different MLT sectors (e.g. Van Allen Probes, GOES, LANL, THEMIS). The model can be helpful for the prediction of crucial for satellite operators geosynchronous electron fluxes and electron radiation belt dynamics including the heart of the outer belt, slot region and inner belt.

  10. Carbon dioxide adsorption in graphene sheets

    Directory of Open Access Journals (Sweden)

    Ashish Kumar Mishra

    2011-09-01

    Full Text Available Control over the CO2 emission via automobiles and industrial exhaust in atmosphere, is one of the major concerns to render environmental friendly milieu. Adsorption can be considered to be one of the more promising methods, offering potential energy savings compared to absorbent systems. Different carbon nanostructures (activated carbon and carbon nanotubes have attracted attention as CO2 adsorbents due to their unique surface morphology. In the present work, we have demonstrated the CO2 adsorption capacity of graphene, prepared via hydrogen induced exfoliation of graphitic oxide at moderate temperatures. The CO2 adsorption study was performed using high pressure Sieverts apparatus and capacity was calculated by gas equation using van der Waals corrections. Physical adsorption of CO2 molecules in graphene was confirmed by FTIR study. Synthesis of graphene sheets via hydrogen exfoliation is possible at large scale and lower cost and higher adsorption capacity of as prepared graphene compared to other carbon nanostructures suggests its possible use as CO2 adsorbent for industrial application. Maximum adsorption capacity of 21.6 mmole/g was observed at 11 bar pressure and room temperature (25 ºC.

  11. Modeling of Sandwich Sheets with Metallic Foam

    International Nuclear Information System (INIS)

    Mata, H.; Jorge, R. Natal; Fernandes, A. A.; Parente, M. P. L.; Santos, A.; Valente, R. A. F.

    2011-01-01

    World-wide vehicles safety experts agree that significant further reductions in fatalities and injuries can be achieved as a result of the use of new lightweight and energy absorbing materials. On this work, the authors present the development and evaluation of an innovative system able to perform reliable panels of sandwich sheets with metallic foam cores for industrial applications. The mathematical model used to describe the behavior of sandwich shells with metal cores foam is presented and some numerical examples are presented. In order to validate those results mechanical experiments are carried out. Using the crushable foam constitutive model, available on ABAQUS, a set of different mechanical tests were simulated. There are two variants of this model available on ABAQUS: the volumetric hardening model and the isotropic hardening model. As a first approximation we chose the isotropic hardening variant. The isotropic hardening model available uses a yield surface that is an ellipse centered at the origin in the p-q stress plane. Based on this constitutive model for the foam, numerical simulations of the tensile and bulge test will be conducted. The numerical results will be validated using the data obtained from the experimental results.

  12. Greenland Ice Sheet Monitoring Network (GLISN): Contributions to Science and Society

    Science.gov (United States)

    Anderson, K. R.; Bonaime, S.; Clinton, J. F.; Dahl-Jensen, T.; Debski, W. M.; Giardini, D.; Govoni, A.; Kanao, M.; Larsen, T. B.; Lasocki, S.; Lee, W. S.; McCormack, D. A.; Mykkeltveit, S.; Nettles, M.; Stutzmann, E.; Strollo, A.; Sweet, J. R.; Tsuboi, S.; Vallee, M.

    2017-12-01

    The Greenland Ice Sheet Monitoring Network (GLISN) is a broadband, multi-use seismological network, enhanced by selected geodetic observations, designed with the capability to allow researchers to understand the changes currently occurring in the Arctic, and with the operational characteristics necessary to enable response to those changes as understanding improves. GLISN was established through an international collaboration, with 10 nations coordinating their efforts to develop the current 34-station observing network during the last eight years. All of the data collected are freely and openly available in near-real time. The network was designed to transform the community capability for recording, analysis, and interpretation of seismic signals generated by discrete events in Greenland and the Arctic, as well as those traversing the region. Data from the network support a wide range of uses, including estimation of the properties of the solid Earth that control isostatic adjustment rates and set key boundary conditions for ice-sheet evolution; analysis of tectonic earthquakes throughout Greenland and the Arctic; study of the seismic signals associated with large calving events and changing glacier dynamics; and variations in ice and snow properties within the Greenland Ice Sheet. Recordings from the network have also provided invaluable data for rapid evaluation and understanding of the devastating landslide and tsunami that occurred near Nuugaatsiaq, Greenland, in June, 2017. The GLISN strategy of maximizing data quality from a network of approximately evenly distributed stations, delivering data in near-real time, and archiving a continuous data stream easily accessible to researchers, allows continuous discovery of new uses while also facilitating the generation of data products, such as catalogs of tectonic and glacial earthquakes and GPS-based estimates of snow height, that allow for assessment of change over time.

  13. Initiation and long-term instability of the East Antarctic Ice Sheet

    Science.gov (United States)

    Gulick, Sean P. S.; Shevenell, Amelia E.; Montelli, Aleksandr; Fernandez, Rodrigo; Smith, Catherine; Warny, Sophie; Bohaty, Steven M.; Sjunneskog, Charlotte; Leventer, Amy; Frederick, Bruce; Blankenship, Donald D.

    2017-12-01

    Antarctica’s continental-scale ice sheets have evolved over the past 50 million years. However, the dearth of ice-proximal geological records limits our understanding of past East Antarctic Ice Sheet (EAIS) behaviour and thus our ability to evaluate its response to ongoing environmental change. The EAIS is marine-terminating and grounded below sea level within the Aurora subglacial basin, indicating that this catchment, which drains ice to the Sabrina Coast, may be sensitive to climate perturbations. Here we show, using marine geological and geophysical data from the continental shelf seaward of the Aurora subglacial basin, that marine-terminating glaciers existed at the Sabrina Coast by the early to middle Eocene epoch. This finding implies the existence of substantial ice volume in the Aurora subglacial basin before continental-scale ice sheets were established about 34 million years ago. Subsequently, ice advanced across and retreated from the Sabrina Coast continental shelf at least 11 times during the Oligocene and Miocene epochs. Tunnel valleys associated with half of these glaciations indicate that a surface-meltwater-rich sub-polar glacial system existed under climate conditions similar to those anticipated with continued anthropogenic warming. Cooling since the late Miocene resulted in an expanded polar EAIS and a limited glacial response to Pliocene warmth in the Aurora subglacial basin catchment. Geological records from the Sabrina Coast shelf indicate that, in addition to ocean temperature, atmospheric temperature and surface-derived meltwater influenced East Antarctic ice mass balance under warmer-than-present climate conditions. Our results imply a dynamic EAIS response with continued anthropogenic warming and suggest that the EAIS contribution to future global sea-level projections may be under-estimated.

  14. Cell sheet mechanics: How geometrical constraints induce the detachment of cell sheets from concave surfaces.

    Science.gov (United States)

    Yamashita, Tadahiro; Kollmannsberger, Philip; Mawatari, Kazuma; Kitamori, Takehiko; Vogel, Viola

    2016-11-01

    Despite of the progress made to engineer structured microtissues such as BioMEMS and 3D bioprinting, little control exists how microtissues transform as they mature, as the misbalance between cell-generated forces and the strength of cell-cell and cell-substrate contacts can result in unintended tissue deformations and ruptures. To develop a quantitative perspective on how cellular contractility, scaffold curvature and cell-substrate adhesion control such rupture processes, human aortic smooth muscle cells were grown on glass substrates with submillimeter semichannels. We quantified cell sheet detachment from 3D confocal image stacks as a function of channel curvature and cell sheet tension by adding different amounts of Blebbistatin and TGF-β to inhibit or enhance cell contractility, respectively. We found that both higher curvature and higher contractility increased the detachment probability. Variations of the adhesive strength of the protein coating on the substrate revealed that the rupture plane was localized along the substrate-extracellular matrix interface for non-covalently adsorbed adhesion proteins, while the collagen-integrin interface ruptured when collagen I was covalently crosslinked to the substrate. Finally, a simple mechanical model is introduced that quantitatively explains how the tuning of substrate curvature, cell sheet contractility and adhesive strength can be used as tunable parameters as summarized in a first semi-quantitative phase diagram. These parameters can thus be exploited to either inhibit or purposefully induce a collective detachment of sheet-like microtissues for the use in tissue engineering and regenerative therapies. Despite of the significant progress in 3D tissue fabrication technologies at the microscale, there is still no quantitative model that can predict if cells seeded on a 3D structure maintain the imposed geometry while they form a continuous microtissue. Especially, detachment or loss of shape control of growing

  15. Micro-fluidic partitioning between polymeric sheets for chemical amplification and processing

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Brian L.

    2017-01-24

    A system for fluid partitioning for chemical amplification or other chemical processing or separations of a sample, comprising a first dispenser of a first polymeric sheet, wherein the first polymeric sheet contains chambers; a second dispenser of a second polymeric sheet wherein the first dispenser and the second dispenser are positioned so that the first polymeric sheet and the second polymeric sheet become parallel; a dispenser of the fluid positioned to dispense the fluid between the first polymeric sheet and the second polymeric sheet; and a seal unit that seals the first polymeric sheet and the second polymeric sheet together thereby sealing the sample between the first polymeric sheet and the second polymeric sheet and partitioning the fluid for chemical amplification or other chemical processing or separations.

  16. Southern Hemisphere climate variability forced by Northern Hemisphere ice-sheet topography

    Science.gov (United States)

    Jones, T. R.; Roberts, W. H. G.; Steig, E. J.; Cuffey, K. M.; Markle, B. R.; White, J. W. C.

    2018-02-01

    The presence of large Northern Hemisphere ice sheets and reduced greenhouse gas concentrations during the Last Glacial Maximum fundamentally altered global ocean-atmosphere climate dynamics. Model simulations and palaeoclimate records suggest that glacial boundary conditions affected the El Niño-Southern Oscillation, a dominant source of short-term global climate variability. Yet little is known about changes in short-term climate variability at mid- to high latitudes. Here we use a high-resolution water isotope record from West Antarctica to demonstrate that interannual to decadal climate variability at high southern latitudes was almost twice as large at the Last Glacial Maximum as during the ensuing Holocene epoch (the past 11,700 years). Climate model simulations indicate that this increased variability reflects an increase in the teleconnection strength between the tropical Pacific and West Antarctica, owing to a shift in the mean location of tropical convection. This shift, in turn, can be attributed to the influence of topography and albedo of the North American ice sheets on atmospheric circulation. As the planet deglaciated, the largest and most abrupt decline in teleconnection strength occurred between approximately 16,000 years and 15,000 years ago, followed by a slower decline into the early Holocene.

  17. Tracking millennial-scale Holocene glacial advance and retreat using osmium isotopes: Insights from the Greenland ice sheet

    Science.gov (United States)

    Rooney, Alan D.; Selby, David; Llyod, Jeremy M.; Roberts, David H.; Luckge, Andreas; Sageman, Bradley B.; Prouty, Nancy G.

    2016-01-01

    High-resolution Os isotope stratigraphy can aid in reconstructing Pleistocene ice sheet fluctuation and elucidating the role of local and regional weathering fluxes on the marine Os residence time. This paper presents new Os isotope data from ocean cores adjacent to the West Greenland ice sheet that have excellent chronological controls. Cores MSM-520 and DA00-06 represent distal to proximal sites adjacent to two West Greenland ice streams. Core MSM-520 has a steadily decreasing Os signal over the last 10 kyr (187Os/188Os = 1.35–0.81). In contrast, Os isotopes from core DA00-06 (proximal to the calving front of Jakobshavn Isbræ) highlight four stages of ice stream retreat and advance over the past 10 kyr (187Os/188Os = 2.31; 1.68; 2.09; 1.47). Our high-resolution chemostratigraphic records provide vital benchmarks for ice-sheet modelers as we attempt to better constrain the future response of major ice sheets to climate change. Variations in Os isotope composition from sediment and macro-algae (seaweed) sourced from regional and global settings serve to emphasize the overwhelming effect weathering sources have on seawater Os isotope composition. Further, these findings demonstrate that the residence time of Os is shorter than previous estimates of ∼104 yr.

  18. Free radially expanding liquid sheet in air: time- and space-resolved measurement of the thickness field

    Science.gov (United States)

    Ligoure, Christian; Vernay, Clara; Ramos, Laurence

    2014-11-01

    The collision of a liquid drop against a small target results in the formation of a thin liquid sheet that extends radially until it reaches a maximum diameter. We have developed an original time- and space-resolved technique to measure the thickness field of this class of liquid sheet, based on the grey level measurement of the image of a dyed liquid sheet recorded using a fast camera. This method enables a precise measurement of the thickness in the range (10--450) μm, with a temporal resolution equals to that of the camera. Two asymptotic regimes for the expansion of the sheet are evidenced. The scalings of the thickness with t and r measured in the two regimes are those that were predicted but never experimentally measured before. Interestingly, our experimental data also evidence the existence of a maximum of the film thickness hmax (r) at a radial position rhmax (t) corresponding to the crossover of these two asymptotic regimes. The maximum moves with a constant velocity of the order of the impact velocity, Hence, our data has allowed one to reconcile the two apparently inconsistent theoretical predictions found in the literature Thanks to our visualization technique, we also evidence an azimuthal thickness modulation. Financial support from Solvay is acknowledged.

  19. Increasing water vapor transport to the Greenland Ice Sheet revealed using self-organizing maps

    Science.gov (United States)

    Mattingly, Kyle S.; Ramseyer, Craig A.; Rosen, Joshua J.; Mote, Thomas L.; Muthyala, Rohi

    2016-09-01

    The Greenland Ice Sheet (GrIS) has been losing mass in recent decades, with an acceleration in mass loss since 2000. In this study, we apply a self-organizing map classification to integrated vapor transport data from the ERA-Interim reanalysis to determine if these GrIS mass loss trends are linked to increases in moisture transport to Greenland. We find that "moist" days (i.e., days featuring anomalously intense water vapor transport to Greenland) were significantly more common during 2000-2015 compared to 1979-1994. Furthermore, the two most intense GrIS melt seasons during the last 36 years were either preceded by a record percentage of moist winter days (2010) or occurred during a summer with a record frequency of moist days (2012). We hypothesize that moisture transport events alter the GrIS energy budget by increasing downwelling longwave radiation and turbulent fluxes of sensible and latent energy.

  20. Climate Record Books

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Climate Record Books contain daily, monthly, seasonal, and annual averages, extremes, or occurrences. Most data are sequential by period of record 1871-1910,...

  1. Electronic Health Records

    Science.gov (United States)

    ... Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Electronic Health Records KidsHealth / For Teens / Electronic Health Records ...

  2. Daily Weather Records

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These daily weather records were compiled from a subset of stations in the Global Historical Climatological Network (GHCN)-Daily dataset. A weather record is...

  3. Iraq Radiosonde Launch Records

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Iraqi upper air records loaned to NCDC from the Air Force 14th Weather Squadron. Scanned notebooks containing upper air radiosonde launch records and data. Launches...

  4. Copyright. CET Information Sheet No. 6.

    Science.gov (United States)

    Council for Educational Technology, London (England).

    The United Kingdom (UK) is a large producer of published materials and as such has a strong copyright law (the Copyright Act of 1956). The law protects eight categories of materials--literary, dramatic, musical, and artistic works; sound recordings; film; broadcasts; and published editions--but the law varies from one type of material to another.…

  5. Revisiting the curvature cancellation in forced thin sheets

    Science.gov (United States)

    Wang, Jin; Witten, Thomas

    2011-03-01

    We revisit the numerically observed spontaneous vanishing of mean curvature on a developable cone or ``d-cone'' made by pushing a thin elastic sheet into a circular container. The deflection of the d-cone is the distance by which the sheet is pushed into the container. We investigate the ratio of the two principal curvatures versus sheet thickness h over a wider dynamic range than was used previously, holding the deflection and radius fixed. Instead of tending towards 1 as suggested by previous work, we find that the ratio scales as h 1 / 3 . Scaling arguments and geometric variants support this h 1 / 3 finding. Thus the mean curvature does not vanish for very thin sheets as previously claimed. Supported by NSF award DMR 0820054.

  6. Surface Modification of Titanium and Polyimide Sheet for Adhesive Bonding

    NARCIS (Netherlands)

    Akram, M.

    2015-01-01

    Major industrial sectors like automotive, aerospace and others are increasingly using polymer composites in their structural parts. Polyimide sheet and adhesives, are high performance polymers. They are widely used in various engineering applications due to their excellent thermal, mechanical and

  7. TSCA Chemical Data Reporting Fact Sheet: Imported Articles

    Science.gov (United States)

    This fact sheet provides guidance and sample reporting scenarios on the reporting exemption for the import of a chemical substance as part of an article, for purposes of the Chemical Data Reporting (CDR) rule.

  8. Hydrologic Outlets of the Greenland Ice Sheet, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Hydrologic Outlets of the Greenland Ice Sheet data set contains GIS point shapefiles that include 891 observed and potential hydrologic outlets of the Greenland...

  9. The National Agriculture Imagery Program (NAIP) Information Sheet

    Data.gov (United States)

    Farm Service Agency, Department of Agriculture — This story map journal is an interactive version of the NAIP information sheet provided on the Aerial Photography Field Office web site. This map journal provides...

  10. Final Rule for Industrial Process Cooling Towers: Fact Sheet

    Science.gov (United States)

    Fact sheet concerning a final rule to reduce air toxics emissions from industrial process cooling towers. Air toxics are those pollutants known or suspected of causing cancer or other serious health effects.

  11. Writing Material Safely Data Sheets Using the ANSI Standard.

    Science.gov (United States)

    Croft, Suzanne D.

    1996-01-01

    Presents a history of the ANSI (American National Standards Institute) standard for preparation of Material Safety Data Sheets (MSDS), and provides a section-by-section guide to preparing MSDSs that comply with the standard. (SR)

  12. First principle study of manganese doped cadmium sulphide sheet

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sanjeev, E-mail: drskumar11@gmail.com [Department of Physics, St. Bede' s College, Shimla-171002 (India); Kumar, Ashok; Ahluwalia, P. K. [Department of Physics, Himachal Pradesh University, Shimla-171005 (India)

    2014-04-24

    First-principle electronic structure calculations for cadmium sulphide (CdS) sheet in hexagonal phase, with Manganese substitution and addition, as well as including the Cd defects, are investigated. The lattice constants calculated for CdS sheet agrees fairly well with results reported for thin films experimentally. The calculations of total spin density of states and partial density of states in different cases shows substantial magnetic dipole moments acquired by the sheet. A magnetic dipole moment 5.00612 μ{sub B} and band gap of the order 1 eV are found when cadmium atom is replaced by Manganese. The magnetism acquired by the sheet makes it functionally important candidate in many applications.

  13. Influence of cantilevered sheet pile deflection on adjacent roadways.

    Science.gov (United States)

    2009-06-01

    Cantilevered sheet pile walls are often used adjacent roadways as temporary support during construction. Excess movement of these walls has led to excessive roadway distress causing additional repairs to be necessary. This study assessed the effects ...

  14. Fact Sheet: What Parents Need to Know About Zika Virus

    Science.gov (United States)

    ... Fact Sheet: What Parents Need to Know About Zika Virus Published: July 6, 2016 Program Areas: Preparedness Topics: Children & Families Grantees Tags: Zika Share What is Zika virus? Zika is a virus that is thought to ...

  15. Complex world-sheets from N=2 strings

    International Nuclear Information System (INIS)

    Barbon, J.L.F.

    1996-01-01

    We study some properties of target space strings constructed from (2,1) heterotic strings. We argue that world-sheet complexification is a general property of the bosonic sector of such target world-sheets. We give a target space interpretation of this fact and relate it to the non-gaussian nature of free string field theory. We provide several one-loop calculations supporting the stringy construction of critical world-sheets in terms of (2,1) models. Using finite-temperature boundary conditions in the underlying (2,1) string we obtain non-chiral target space spin structures, and point out some of the problems arising for chiral spin structures, such as the heterotic world-sheet. To this end, we study the torus partition function of the corresponding asymmetric orbifold of the (2,1) string. (orig.)

  16. Working with Design: A Package for Sheet Metal

    Science.gov (United States)

    Fiebich, Paul D.

    1974-01-01

    The author describes a design approach used to study sheet metal layout in junior high and high school mechanical drafting courses. Students observe packaging in stores, study package construction, and design and produce their own packages. (EA)

  17. Greenland Ice Sheet Melt Characteristics Derived from Passive Microwave Data

    Data.gov (United States)

    National Aeronautics and Space Administration — The Greenland ice sheet melt extent data, acquired as part of the NASA Program for Arctic Regional Climate Assessment (PARCA), is a daily (or every other day, prior...

  18. Technical Fact Sheet – 1,2,3-Trichloropropane (TCP)

    Science.gov (United States)

    This fact sheet, developed by the U.S. Environmental Protection Agency (EPA) Federal Facilities Restoration and Reuse Office (FFRRO), provides a brief summary of the contaminant 1,2,3-trichloropropane (TCP), including physical and chemical properties;

  19. optimisation of thickness of fibre reinforced polymer sheets

    African Journals Online (AJOL)

    user

    2017-01-01

    Jan 1, 2017 ... OPTIMISATION OF THICKNESS OF FIBRE REINFORCED POLYMER SHEETS FOR. STRENGTHENING REINFORCED CONCRETE BEAMS WITH FLEXURAL DEFICIENCY. J. M. Kaura. DEPARTMENT OF CIVIL ENGINEERING, AHMADU BELLO UNIVERSITY, ZARIA, KADUNA STATE. NIGERIA.

  20. Nonparaxial Bessel and Bessel-Gauss pincers light-sheets

    Science.gov (United States)

    Mitri, F. G.

    2017-01-01

    Nonparaxial optical Bessel and Bessel-Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

  1. Financing gas plants using off balance sheet structures

    International Nuclear Information System (INIS)

    Best, R.J.; Malcolm, V.

    1999-01-01

    A means by which to finance oil and gas facilities using off balance sheet structures was presented. Off balance sheet facility financing means the sale by an oil and gas producer of a processing and/or transportation facility to a financial intermediary, who under a Management Agreement, appoints the producer as the operator of the facility. The financial intermediary charges a fixed processing fee to the producer and all the benefits and upside of ownership are retained by the producer. This paper deals specifically with a flexible off balance sheet facility financing structure that can be used to make effective use of discretionary capital which is committed to gas processing and to the construction of new gas processing facilities. Off balance sheet financing is an attractive alternative method of ownership that frees up capital that is locked into the facilities while allowing the producer to retain strategic control of the processing facility

  2. Modeling and Analysis of CSP Systems (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2010-08-01

    Fact sheet describing NREL CSP Program capabilities in the area of modeling and analysis of CSP systems: assessing the solar resource, predicting performance and cost, studying environmental impact, and developing modeling software packages.

  3. A Finite Element Analysis of Optimal Variable Thickness Sheets

    DEFF Research Database (Denmark)

    Petersson, Joakim S

    1996-01-01

    A quasimixed Finite Element (FE) method for maximum stiffness of variablethickness sheets is analysed. The displacement is approximated with ninenode Lagrange quadrilateral elements and the thickness is approximated aselementwise constant. One is guaranteed that the FE displacement solutionswill ...

  4. TSCA Chemical Data Reporting Fact Sheet: Toll Manufacturing

    Science.gov (United States)

    This fact sheet provides information on existing Chemical Data Reporting (CDR) regulations to persons who are involved in toll manufacturing of chemical substances which may be subject to the CDR rule.

  5. Interpreting land records

    CERN Document Server

    Wilson, Donald A

    2014-01-01

    Base retracement on solid research and historically accurate interpretation Interpreting Land Records is the industry's most complete guide to researching and understanding the historical records germane to land surveying. Coverage includes boundary retracement and the primary considerations during new boundary establishment, as well as an introduction to historical records and guidance on effective research and interpretation. This new edition includes a new chapter titled "Researching Land Records," and advice on overcoming common research problems and insight into alternative resources wh

  6. Geometry task & drill sheets : grades 6-8

    CERN Document Server

    Rosenberg, Mary

    2011-01-01

    For grades 6-8, our Common Core State Standards-based combined resource meets the geometry concepts addressed by the NCTM standards and encourages the students to review the concepts in unique ways. The task sheets introduce the mathematical concepts to the students around a central problem taken from real-life experiences, while the drill sheets provide warm-up and timed practice questions for the students to strengthen their procedural proficiency skills.

  7. Importance of Nisar Mission for Ice Sheet Studies

    Science.gov (United States)

    Rignot, E. J.; Scheuchl, B.; Mouginot, J.; Morlighem, M.

    2014-12-01

    This presentation addresses how the synthetic-aperture radar (SAR) satellite mission under discussion between NASA and ISRO - entitled NISAR - will help us better understand and project the evolution of ice sheets and glaciers in a changing climate. NISAR is a dedicated L-band interferometry mission that will document changes in ice flow dynamics, grounding line positions and other critical boundaries over the lifetime of its mission. Changes in ice sheet dynamics represent by far the largest uncertainty in sea level projections. NISAR will better constrain critical boundaries of ice sheets at the base (basal friction) and at the seaward margins (ice melt rate) by providing the first set of continuous, systematic and comprehensive observations of ice sheet dynamics that will help us better understand ice sheets and glaciers and enable massive data assimilation in numerical ice sheet models. NISAR will contribute observations of areas of irreversible retreat taking place in Greenland and Antarctica, provide detailed time series of glacier velocities throughout entire seasonal cycles, document grounding line dynamics on weekly time scales, enable estimations of temporal and spatial changes in basal friction during glacial retreat; it will also in combination with other data help us map the bed topography of entire ice sheets at a high spatial resolution, document changes in ice shelf melt rate around the periphery of the continents, and provide a first systematic 3D vector mapping of ice velocity. NISAR will constitute a much needed warning system for ice sheet and ice shelf changes, it will document fundamental processes poorly observed in the past (e.g. calving, ice shelf melt, grounding line dynamics) and enable robust data assimilation to play a critical role in reducing uncertainties of coupled numerical models of ocean-ice-atmosphere interactions. This work was performed at UCI and JPL under a contract with NASA.

  8. Off-balance-sheet financing to the refining industry

    International Nuclear Information System (INIS)

    Jenkins, J.H.

    1995-01-01

    Off-balance-sheet lending, or project finance, is becoming an increasingly popular means of capital formation in the refining and petrochemical industries. However, these transactions are substantially different from traditional corporate lending, and the demands placed on the borrower to examine, substantiate, and support the project are far greater. The following paper examines ways in which international banks and other lenders evaluate off-balance-sheet refinery projects and suggests ways to better structure financial representations

  9. Application of Submerged Grouted Anchors in Sheet Pile Quay Walls

    OpenAIRE

    Mollahasani, Ali

    2014-01-01

    Sheet pile walls are one of the oldest earth retention systems utilized in civil engineering projects. They are used for various purposes; such as excavation support system, cofferdams, cut-off walls under dams, slope stabilization, waterfront structures, and flood walls. Sheet pile walls are one of the most common types of quay walls used in port construction. The worldwide increases in utilization of large ships for transportation have created an urgent need of deepening the seabed within p...

  10. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    OpenAIRE

    Pasquale Russo Spena

    2017-01-01

    This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

  11. Number & operations task & drill sheets : grades 3-5

    CERN Document Server

    Reed, Nat

    2011-01-01

    For grades 3-5, our Common Core State Standards-based combined resource meets the number & operations concepts addressed by the NCTM standards and encourages the students to review the concepts in unique ways. The task sheets introduce the mathematical concepts to the students around a central problem taken from real-life experiences, while the drill sheets provide warm-up and timed practice questions for the students to strengthen their procedural proficiency skills.

  12. Bamboo Fibre Reinforced Cement Used as a Roofing Sheet | Alade ...

    African Journals Online (AJOL)

    ... bamboo fibre-roofing sheet could be used as a low cost roofing sheet. It is however imperative that the roofing system should be at slope of 45o – 60o to ensure speedy flow of water down the slope and also reduce the shock effect when a lateral load falls on it. Journal of Civil Engineering Research and Practice Vol.1(2)

  13. DIAGNOSIS OF FINANCIAL POSITION BY BALANCE SHEET ANALYSIS - CASE STUDY

    OpenAIRE

    Hada Teodor; Marginean Radu

    2013-01-01

    This study aims to elucidate and to exemplify an important technique for assessing the economic entities, namely the fundamental analysis of the balance sheet, in several significant aspects. The analysis of financial data reported in the balance sheet are, for an economic entity, the basis of a principle diagnosis by determining specific indicators of economic and financial analysis. This analysis aims to provide an insight into the companyâ€(tm)s financial position. The stated aim of this s...

  14. Bank stress testing under different balance sheet assumptions

    OpenAIRE

    Busch, Ramona; Drescher, Christian; Memmel, Christoph

    2017-01-01

    Using unique supervisory survey data on the impact of a hypothetical interest rate shock on German banks, we analyse price and quantity effects on banks' net interest margin components under different balance sheet assumptions. In the first year, the cross-sectional variation of banks' simulated price effect is nearly eight times as large as the one of the simulated quantity effect. After five years, however, the importance of both effects converges. Large banks adjust their balance sheets mo...

  15. Effects of the IMF on the plasma sheet

    International Nuclear Information System (INIS)

    Akasofu, S.-I.; Meng, C.-I.

    1986-01-01

    It is suggested that the IMF Bsub(z) component controls partially the geometry of the cross-section (y-z plane) of the plasma sheet. Our vacuum superposition model suggests that the cross-section has a dumbbell shape for te IMF Bsub(z) O. It is also suggested that the thinning and subsequent expansion of the plasma sheet during magnetospheric substorms are partially due to a direct effect of the IMF Bsub(z). (author)

  16. Records Management Manual.

    Science.gov (United States)

    Alaska State Dept. of Education, Juneau. State Archives and Records Management.

    This manual, prepared primarily for state government agencies, describes the organization and management of Alaska government records. Information is presented in nine topic areas: (1) Alaska's Archives and Records Management Program, which describes the program, its mission, services available, and employee responsibilities; (2) Records in…

  17. Record Statistics and Dynamics

    DEFF Research Database (Denmark)

    Sibani, Paolo; Jensen, Henrik J.

    2009-01-01

    with independent random increments. The term record dynamics covers the rather new idea that records may, in special situations, have measurable dynamical consequences. The approach applies to the aging dynamics of glasses and other systems with multiple metastable states. The basic idea is that record sizes...

  18. Managing electronic records

    CERN Document Server

    McLeod, Julie

    2005-01-01

    For records management courses, this book covers the theory and practice of managing electronic records as business and information assets. It focuses on the strategies, systems and procedures necessary to ensure that electronic records are appropriately created, captured, organized and retained over time to meet business and legal requirements.

  19. Your Medical Records

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español Your Medical Records KidsHealth / For Teens / Your Medical Records What's ... Print en español Tus historias clínicas What Are Medical Records? Each time you climb up on a ...

  20. Technical implementations of light sheet microscopy.

    Science.gov (United States)

    Elisa, Zagato; Toon, Brans; De Smedt, Stefaan C; Katrien, Remaut; Kristiaan, Neyts; Kevin, Braeckmans

    2018-01-11

    Fluorescence-based microscopy is among the most successful methods in biological studies. It played a critical role in the visualization of subcellular structures and in the analysis of complex cellular processes, and it is nowadays commonly employed in genetic and drug screenings. Among the fluorescence-based microscopy techniques, light sheet fluorescence microscopy (LSFM) has shown a quite interesting set of benefits. The technique combines the speed of epi-fluorescence acquisition with the optical sectioning capability typical of confocal microscopes. Its unique configuration allows the excitation of only a thin plane of the sample, thus fast, high resolution imaging deep inside tissues is nowadays achievable. The low peak intensity with which the sample is illuminated diminishes phototoxic effects and decreases photobleaching of fluorophores, ensuring data collection for days with minimal adverse consequences on the sample. It is no surprise that LSFM applications have raised in just few years and the technique has been applied to study a wide variety of samples, from whole organism, to tissues, to cell clusters, and single cells. As a consequence, in recent years numerous set-ups have been developed, each one optimized for the type of sample in use and the requirements of the question at hand. Hereby, we aim to review the most advanced LSFM implementations to assist new LSFM users in the choice of the LSFM set-up that suits their needs best. We also focus on new commercial microscopes and "do-it-yourself" strategies; likewise we review recent designs that allow a swift integration of LSFM on existing microscopes. © 2018 Wiley Periodicals, Inc.

  1. Traction forces exerted by epithelial cell sheets

    International Nuclear Information System (INIS)

    Saez, A; Anon, E; Ghibaudo, M; Di Meglio, J-M; Hersen, P; Ladoux, B; Du Roure, O; Silberzan, P; Buguin, A

    2010-01-01

    Whereas the adhesion and migration of individual cells have been well described in terms of physical forces, the mechanics of multicellular assemblies is still poorly understood. Here, we study the behavior of epithelial cells cultured on microfabricated substrates designed to measure cell-to-substrate interactions. These substrates are covered by a dense array of flexible micropillars whose deflection enables us to measure traction forces. They are obtained by lithography and soft replica molding. The pillar deflection is measured by video microscopy and images are analyzed with home-made multiple particle tracking software. First, we have characterized the temporal and spatial distributions of traction forces of cellular assemblies of various sizes. The mechanical force balance within epithelial cell sheets shows that the forces exerted by neighboring cells strongly depend on their relative position in the monolayer: the largest deformations are always localized at the edge of the islands of cells in the active areas of cell protrusions. The average traction stress rapidly decreases from its maximum value at the edge but remains much larger than the inherent noise due to the force resolution of our pillar tracking software, indicating an important mechanical activity inside epithelial cell islands. Moreover, these traction forces vary linearly with the rigidity of the substrate over about two decades, suggesting that cells exert a given amount of deformation rather than a force. Finally, we engineer micropatterned substrates supporting pillars with anisotropic stiffness. On such substrates cellular growth is aligned with respect to the stiffest direction in correlation with the magnitude of the applied traction forces.

  2. A System for Reflective Learning Using Handwriting Tablet Devices for Real-Time Event Bookmarking into Simultaneously Recorded Videos

    Science.gov (United States)

    Nakajima, Taira

    2012-01-01

    The author demonstrates a new system useful for reflective learning. Our new system offers an environment that one can use handwriting tablet devices to bookmark symbolic and descriptive feedbacks into simultaneously recorded videos in the environment. If one uses video recording and feedback check sheets in reflective learning sessions, one can…

  3. 9 CFR 203.4 - Statement with respect to the disposition of records by packers, live poultry dealers, stockyard...

    Science.gov (United States)

    2010-01-01

    ... sheets; scale tickets received from others; inventory and products in storage; receiving records; trial... slips; production or sale tonnage reports (including recapitulations and summaries of routes, branches... sales invoices, or claims or credit memoranda; and Provided further, That microfilm copies of records...

  4. VESL: The Virtual Earth Sheet Laboratory for Ice Sheet Modeling and Visualization

    Science.gov (United States)

    Cheng, D. L. C.; Larour, E. Y.; Quinn, J. D.; Halkides, D. J.

    2016-12-01

    We introduce the Virtual Earth System Laboratory (VESL), a scientific modeling and visualization tool delivered through an integrated web portal for dissemination of data, simulation of physical processes, and promotion of climate literacy. The current prototype leverages NASA's Ice Sheet System Model (ISSM), a state-of-the-art polar ice sheet dynamics model developed at the Jet Propulsion Lab and UC Irvine. We utilize the Emscripten source-to-source compiler to convert the C/C++ ISSM engine core to JavaScript, and bundled pre/post-processing JS scripts to be compatible with the existing ISSM Python/Matlab API. Researchers using VESL will be able to effectively present their work for public dissemination with little-to-no additional post-processing. This will allow for faster publication in peer-reviewed journals and adaption of results for educational applications. Through future application of this concept to multiple aspects of the Earth System, VESL has the potential to broaden data applications in the geosciences and beyond. At this stage, we seek feedback from the greater scientific and public outreach communities regarding the ease of use and feature set of VESL, as we plan its expansion, and aim to achieve more rapid communication and presentation of scientific results.

  5. VESL: The Virtual Earth Sheet Laboratory for Ice Sheet Modeling and Visualization

    Science.gov (United States)

    Cheng, D. L. C.; Larour, E. Y.; Quinn, J. D.; Halkides, D. J.

    2017-12-01

    We present the Virtual Earth System Laboratory (VESL), a scientific modeling and visualization tool delivered through an integrated web portal. This allows for the dissemination of data, simulation of physical processes, and promotion of climate literacy. The current iteration leverages NASA's Ice Sheet System Model (ISSM), a state-of-the-art polar ice sheet dynamics model developed at the Jet Propulsion Lab and UC Irvine. We utilize the Emscripten source-to-source compiler to convert the C/C++ ISSM engine core to JavaScript, and bundled pre/post-processing JS scripts to be compatible with the existing ISSM Python/Matlab API. Researchers using VESL will be able to effectively present their work for public dissemination with little-to-no additional post-processing. Moreover, the portal allows for real time visualization and editing of models, cloud based computational simulation, and downloads of relevant data. This allows for faster publication in peer-reviewed journals and adaption of results for educational applications. Through application of this concept to multiple aspects of the Earth System, VESL is able to broaden data applications in the geosciences and beyond. At this stage, we still seek feedback from the greater scientific and public outreach communities regarding the ease of use and feature set of VESL. As we plan its expansion, we aim to achieve more rapid communication and presentation of scientific results.

  6. Meltwater and Sediment Dynamics of the Greenland Ice Sheet

    Science.gov (United States)

    Hudson, Benjamin D.

    The Greenland Ice Sheet (GrIS) is an important part of the Earth system, impacting climate, the land it occupies, and the ocean it borders. Its meltwater delivers fresh water to fjords and the coastal ocean, influencing sea level, ocean circulation, and sea ice formation. Its sediment decreases fjord light availability and delivers nutrients to the ocean. Sediment also fills fjord basins, builds Greenland's continental shelf, and serves as an archive of the Earth's past. GrIS baseline meltwater and sediment dynamics are poorly characterized. Only one river out of approximately 300 in Greenland has a discharge record longer than 5 years and sediment dynamics have been studied at limited locations. Even less well understood is how `downstream' systems respond to GrIS mass loss, the rate of which has quadrupled since the 1990s. This dissertation employs both field and satellite techniques to better characterize understudied meltwater and sediment dynamics of the GrIS. In Chapter 2, I assessed Greenland river plume dynamics between 2000 and 2012 using NASA MODIS (Moderate Resolution Imaging Spectroradiometer) imagery. Sediment plumes did not respond uniformly to increased melt. Plume size grew for only 50% of study rivers, likely due to highly variable sediment export from the GrIS. Concurrently with this work, I developed a novel cloud mask (Chapter 3). I then explored water and sediment dynamics of an unprecedented 160 rivers using Landsat7 imagery and the Google Earth Engine cloud-computing platform. Certain outlets are hotspots of sediment export and erosion. Further, the island as a whole is a hotspot of global sediment production: from 1 % of the Earth's land surface, it generates 5% to 12% the total sediment export to the ocean. This sediment is a significant, bioavailable source of iron in the ocean (Chapter 4). Finally, I developed two space-based discharge-estimation techniques. This work gauged two unstudied rivers and unified techniques using river

  7. Deglacial ocean warming and marine margin retreat of the Cordilleran Ice Sheet in the North Pacific Ocean

    Science.gov (United States)

    Taylor, M. A.; Hendy, I. L.; Pak, D. K.

    2014-10-01

    A new, high-resolution planktonic foraminiferal Mg/Ca-based ocean temperature record has been generated for deep sea core MD02-2496, sited offshore of Vancouver Island, Western Canada during the last deglaciation (21-12 ka). The relationship between Cordilleran Ice Sheet (CIS) retreat and changing regional ocean temperatures has been reconstructed through glaciomarine sediments in MD02-2496 that capture tidewater glacier response to surface ocean thermal forcing. At CIS maximum extent, the marine margin of the ice sheet advanced onto the continental shelf. During this interval, ocean temperatures recorded by surface dwelling Globigerina bulloides remained a relatively constant ∼7.5 °C while subsurface dwelling Neogloboquadrina pachyderma (s.) recorded temperatures of ∼5 °C. These ocean temperatures were sufficiently warm to induce significant melt along the tidewater ice terminus similar to modern Alaskan tidewater glacial systems. During the deglacial retreat of the CIS, the N. pachyderma temperature record shows two distinct warming steps of ∼ 2 and 2.5 °C between 17.2-16 and 15.5-14 ka respectively, coincident with ice rafting events from the CIS, while G. bulloides records an ∼ 3 °C warming from 15 to 14 ka. We hypothesize that submarine melting resulting from relatively warm ocean temperatures was an important process driving ice removal from CIS tidewater glaciers during the initial stages of deglaciation.

  8. Hanford Site Treated Effluent Disposal Facility process flow sheet

    International Nuclear Information System (INIS)

    Bendixsen, R.B.

    1993-04-01

    This report presents a novel method of using precipitation, destruction and recycle factors to prepare a process flow sheet. The 300 Area Treated Effluent Disposal Facility (TEDF) will treat process sewer waste water from the 300 Area of the Hanford Site, located near Richland, Washington, and discharge a permittable effluent flow into the Columbia River. When completed and operating, the TEDF effluent water flow will meet or exceed water quality standards for the 300 Area process sewer effluents. A preliminary safety analysis document (PSAD), a preconstruction requirement, needed a process flow sheet detailing the concentrations of radionuclides, inorganics and organics throughout the process, including the effluents, and providing estimates of stream flow quantities, activities, composition, and properties (i.e. temperature, pressure, specific gravity, pH and heat transfer rates). As the facility begins to operate, data from process samples can be used to provide better estimates of the factors, the factors can be entered into the flow sheet and the flow sheet will estimate more accurate steady state concentrations for the components. This report shows how the factors were developed and how they were used in developing a flow sheet to estimate component concentrations for the process flows. The report concludes with how TEDF sample data can improve the ability of the flow sheet to accurately predict concentrations of components in the process

  9. Analytical study for deformability of laminated sheet metal

    Directory of Open Access Journals (Sweden)

    Mohammed H. Serror

    2013-01-01

    Full Text Available While a freestanding high-strength sheet metal subject to tension will rupture at a small strain, it is anticipated that lamination with a ductile sheet metal will retard this instability to an extent that depends on the relative thickness, the relative stiffness, and the hardening exponent of the ductile sheet. This paper presents an analytical study for the deformability of such laminate within the context of necking instability. Laminates of high-strength sheet metal and ductile low-strength sheet metal are studied assuming: (1 sheets are fully bonded; and (2 metals obey the power law material model. The effect of hardening exponent, volume fraction and relative stiffness of the ductile component has been studied. In addition, stability of both uniform and nonuniform deformations has been investigated under plane strain condition. The results have shown the retardation of the high-strength layer instability by lamination with the ductile layer. This has been achieved through controlling the aforementioned key parameters of the ductile component, while the laminate exhibits marked enhancement in strength–ductility combination that is essential for metal forming applications.

  10. Analytical study for deformability of laminated sheet metal.

    Science.gov (United States)

    Serror, Mohammed H

    2013-01-01

    While a freestanding high-strength sheet metal subject to tension will rupture at a small strain, it is anticipated that lamination with a ductile sheet metal will retard this instability to an extent that depends on the relative thickness, the relative stiffness, and the hardening exponent of the ductile sheet. This paper presents an analytical study for the deformability of such laminate within the context of necking instability. Laminates of high-strength sheet metal and ductile low-strength sheet metal are studied assuming: (1) sheets are fully bonded; and (2) metals obey the power law material model. The effect of hardening exponent, volume fraction and relative stiffness of the ductile component has been studied. In addition, stability of both uniform and nonuniform deformations has been investigated under plane strain condition. The results have shown the retardation of the high-strength layer instability by lamination with the ductile layer. This has been achieved through controlling the aforementioned key parameters of the ductile component, while the laminate exhibits marked enhancement in strength-ductility combination that is essential for metal forming applications.

  11. Characterization of Platinum Nanoparticles Deposited on Functionalized Graphene Sheets

    Directory of Open Access Journals (Sweden)

    Yu-Chun Chiang

    2015-09-01

    Full Text Available Due to its special electronic and ballistic transport properties, graphene has attracted much interest from researchers. In this study, platinum (Pt nanoparticles were deposited on oxidized graphene sheets (cG. The graphene sheets were applied to overcome the corrosion problems of carbon black at operating conditions of proton exchange membrane fuel cells. To enhance the interfacial interactions between the graphene sheets and the Pt nanoparticles, the oxygen-containing functional groups were introduced onto the surface of graphene sheets. The results showed the Pt nanoparticles were uniformly dispersed on the surface of graphene sheets with a mean Pt particle size of 2.08 nm. The Pt nanoparticles deposited on graphene sheets exhibited better crystallinity and higher oxygen resistance. The metal Pt was the predominant Pt chemical state on Pt/cG (60.4%. The results from the cyclic voltammetry analysis showed the value of the electrochemical surface area (ECSA was 88 m2/g (Pt/cG, much higher than that of Pt/C (46 m2/g. The long-term test illustrated the degradation in ECSA exhibited the order of Pt/C (33% > Pt/cG (7%. The values of the utilization efficiency were calculated to be 64% for Pt/cG and 32% for Pt/C.

  12. Ion temperature profiles in the horns of the plasma sheet

    Science.gov (United States)

    Suszcynsky, D. M.; Gosling, J. T.; Thomsen, M. F.

    1993-01-01

    The plasma sheet horns are the low-altitude extensions of the plasma sheet that lie poleward of the plasmasphere and equatorward of the tail lobes. Within the horns, magnetic field lines of increasing geomagnetic latitudes map to increasing distances into the downtail plasma sheet. Plasma data from the fast plasma experiment on ISEE 2 have been analyzed for 11 outbound crossings of the horns in the premidnight sector of the magnetosphere at typical altitudes of 2-4 R(E). These crossings typically occurred on time scales of less than 1 hour, providing almost instantaneous snapshots of plasma gradients within the horns. Ion temperatures observed during these crossings generally decreased by a factor of four to eight as magnetic field lines of increasing geomagnetic latitude were traversed. If we make the reasonable assumption that the ion temperatures are constant along the field lines within the plasma sheet, then this result implies that the ion temperatures in the downtail plasma sheet also commonly decrease by this same factor over the radial range extending from the inner edge of the plasma sheet at the plasmapause boundary to the outer edge at a neutral line in the distant tail.

  13. Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

    Energy Technology Data Exchange (ETDEWEB)

    Mitri, F.G., E-mail: F.G.Mitri@ieee.org

    2017-01-23

    Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

  14. Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

    International Nuclear Information System (INIS)

    Mitri, F.G.

    2017-01-01

    Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

  15. Shaping thin sheets and the geometry of wavy leaves

    International Nuclear Information System (INIS)

    Sharon, E.

    2004-01-01

    Full Text:Gauss's famous theorem (theorema egregium) establishes the connection between intrinsic metric properties of n surface and its possible shapes in Space. This link provides a powerful mechanism, not yet studied. For the generation of complex three dimensional shapers from train elastic sheets, by - prescribing curved metrics on them-For example the edge of a torn plastic sheet is composed of an organized cascade of waves. The waves are similar in shape but differ greatly in scale. Leading to the formation of n fractal edge as an equilibrium configuration. We show that the tearing process prescribes a hyperbolic metric near the edge of the sheet. This metric should be satisfied in order to reduce the stretching energy, but the limitations on the embedding of such a metric in Euclidean space ''force' the sheet to wrinkle. We use environmentally responsive gels to form ''engineered sheets'' - sheets that adopts a prescribed metric upon induction by environmental conditions. With this system wave can study the shaping mechanism in a large variety of metrics. We suggest that some complex shapes of leaves and flowers might result from this buckling instability that links between simple growth and complex configuration. The complexity, in this case. Results from elasticity and not from complex growth processes, as commonly accepted

  16. 47 CFR 32.101 - Structure of the balance sheet accounts.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Structure of the balance sheet accounts. 32.101... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.101 Structure of the balance sheet accounts. The Balance Sheet accounts shall be maintained as follows...

  17. Estimates of Genetic Parameters of Production Traits for Khuzestan Buffaloes of Iran using Repeated-Records Animal Model

    Directory of Open Access Journals (Sweden)

    Maryam Baharizadeh

    2012-10-01

    Full Text Available Buffalo milk yield records were obtained from monthly records of the Animal Breeding Organization of Iran from 1992 to 2009 in 33 herds raised in the Khuzestan province. Variance components, heritability and repeatability were estimated for milk yield, fat yield, fat percentage, protein yield and protein percentage. These estimates were carried out through single trait animal model using DFREML program. Herd-year-season was considered as fixed effect in the model. For milk production traits, age at calving was fitted as a covariate. The additive genetic and permanent environmental effects were also included in the model. The mean values (±SD for milk yield, fat yield, fat percentage, protein yield and protein percentage were 2285.08±762.47 kg, 144.35±54.86 kg, 6.25±0.90%, 97.30±26.73 kg and 4.19±0.27%, respectively. The heritability (±SE of milk yield, fat yield, fat percentage, protein yield and protein percentage were 0.093±0.08, 0.054±0.06, 0.043±0.05, 0.093±0.16 and zero, respectively. These estimates for repeatability were 0.272, 0.132, 0.043, 0.674 and 0.0002, respectively. Lower values of genetic parameter estimates require more data and reliable pedigree records.

  18. Extra-long interglacial in Northern Hemisphere during MISs 15-13 arising from limited extent of Arctic ice sheets in glacial MIS 14.

    Science.gov (United States)

    Hao, Qingzhen; Wang, Luo; Oldfield, Frank; Guo, Zhengtang

    2015-07-10

    Knowledge of the behavior of Northern Hemisphere (NH) ice sheets over the past million years is crucial for understanding the role of orbitally driven insolation changes on glacial/interglacial cycles. Here, based on the demonstrable link between changes in Chinese loess grain-size and NH ice-sheet extent, we use loess grain-size records to confirm that northern ice-sheets were restricted during marine oxygen isotope stage (MIS) 14. Thus, an unusually long NH interglacial climate of over 100 kyr persisted during MISs 15-13, much longer than expected from marine oxygen isotope records. Taking a global view of the paleoclimate records, MIS 14 inception seems to be a response to changes in Antarctic ice-sheets rather than to NH cooling. Orbital configuration in the two Polar regions shows that the onset of MIS 14 was forced by austral insolation changes, rather than by boreal summer insolation, as Milankovitch theory proposes. Our analysis of MIS 14 raises the possibility that southern insolation forcing may have played an important role in the inception of several other glacials. We suggest that the extra-long NH interglacial climate during MISs 15-13 provided favorable conditions for the second major dispersal episode of African hominins into Eurasia.

  19. Magnetoacoustic waves in diagnostics of the flare current sheets

    Science.gov (United States)

    Jelínek, P.; Karlický, M.

    2012-01-01

    Aims: To obtain diagnostics tools for solar flare current sheets, we numerically studied impulsively generated magnetoacoustic waves in the Harris current sheet. Methods: We used two-dimensional (2-D) magnetohydrodynamic (MHD) and wave dispersion models. Tests of these models were performed for waves in the density slab, where analytical solutions are known. In the MHD model, we solved the full set of ideal MHD equations by means of the modified two-step Lax-Wendroff algorithm. The initial perturbation was chosen to generate preferentially the fast sausage magnetoacoustic waves. To determine the dispersion characteristics of MHD waves in the Harris current sheet, we numerically solved the equation of plasma motions by means of the Runge-Kutta fourth order method together with the bisection iteration one. To establish some diagnostics of these waves and their corresponding flare current sheets, we used the wavelet analysis method. Results: We find that the results of tests of our 2-D MHD and wave dispersion models for the density slab are in good agreement with analytical results. We analyze the magnetoacoustic waves in the current sheet and compare them with those in the density slab. In both cases, for similar geometrical and plasma parameters, we find that wave trains were generated and propagated in a similar way. Their signals registered at selected locations of the Harris current sheet and density slab are also similar. Nevertheless, a dependence of the period of the magnetoacoustic waves on the width of the Harris current sheet differs from that for the density slab. The form of the wave front inside the current sheet similarly differs from that in the density slab. We find that the wavelet spectra of the signals of incoming magnetoacoustic waves at selected locations in the current sheet have the form of wavelet tadpoles. We distinguish that the form of these wavelet tadpoles becomes longer and the heads of the wavelet tadpoles are detected later in time as

  20. Thermoelectric properties of single-layered SnSe sheet

    Science.gov (United States)

    Wang, Fancy Qian; Zhang, Shunhong; Yu, Jiabing; Wang, Qian

    2015-09-01

    Motivated by the recent study of inspiring thermoelectric properties in bulk SnSe [Zhao et al., Nature, 2014, 508, 373] and the experimental synthesis of SnSe sheets [Chen et al., J. Am. Chem. Soc., 2013, 135, 1213], we have carried out systematic calculations for a single-layered SnSe sheet focusing on its stability, electronic structure and thermoelectric properties by using density functional theory combined with Boltzmann transport theory. We have found that the sheet is dynamically and thermally stable with a band gap of 1.28 eV, and the figure of merit (ZT) reaches 3.27 (2.76) along the armchair (zigzag) direction with optimal n-type carrier concentration, which is enhanced nearly 7 times compared to its bulk counterpart at 700 K due to quantum confinement effect. Furthermore, we designed four types of thermoelectric couples by assembling single-layered SnSe sheets with different transport directions and doping types, and found that their efficiencies are all above 13%, which are higher than those of thermoelectric couples made of commercial bulk Bi2Te3 (7%-8%), suggesting the great potential of single-layered SnSe sheets for heat-electricity conversion.Motivated by the recent study of inspiring thermoelectric properties in bulk SnSe [Zhao et al., Nature, 2014, 508, 373] and the experimental synthesis of SnSe sheets [Chen et al., J. Am. Chem. Soc., 2013, 135, 1213], we have carried out systematic calculations for a single-layered SnSe sheet focusing on its stability, electronic structure and thermoelectric properties by using density functional theory combined with Boltzmann transport theory. We have found that the sheet is dynamically and thermally stable with a band gap of 1.28 eV, and the figure of merit (ZT) reaches 3.27 (2.76) along the armchair (zigzag) direction with optimal n-type carrier concentration, which is enhanced nearly 7 times compared to its bulk counterpart at 700 K due to quantum confinement effect. Furthermore, we designed four types of

  1. Sensitivity of Pliocene ice sheets to orbital forcing

    Science.gov (United States)

    Dolan, A.M.; Haywood, A.M.; Hill, D.J.; Dowsett, H.J.; Hunter, S.J.; Lunt, D.J.; Pickering, S.J.

    2011-01-01

    The stability of the Earth's major ice sheets is a critical uncertainty in predictions of future climate and sea level change. One method of investigating the behaviour of the Greenland and the Antarctic ice sheets in a warmer-than-modern climate is to look back at past warm periods of Earth history, for example the Pliocene. This paper presents climate and ice sheet modelling results for the mid-Pliocene warm period (mPWP; 3.3 to 3.0 million years ago), which has been identified as a key interval for understanding warmer-than-modern climates (Jansen et al., 2007). Using boundary conditions supplied by the United States Geological Survey PRISM Group (Pliocene Research, Interpretation and Synoptic Mapping), the Hadley Centre coupled ocean–atmosphere climate model (HadCM3) and the British Antarctic Survey Ice Sheet Model (BASISM), we show large reductions in the Greenland and East Antarctic Ice Sheets (GrIS and EAIS) compared to modern in standard mPWP experiments. We also present the first results illustrating the variability of the ice sheets due to realistic orbital forcing during the mid-Pliocene. While GrIS volumes are lower than modern under even the most extreme (cold) mid-Pliocene orbit (losing at least 35% of its ice mass), the EAIS can both grow and shrink, losing up to 20% or gaining up to 10% of its present-day volume. The changes in ice sheet volume incurred by altering orbital forcing alone means that global sea level can vary by more than 25 m during the mid-Pliocene. However, we have also shown that the response of the ice sheets to mPWP orbital hemispheric forcing can be in anti-phase, whereby the greatest reductions in EAIS volume are concurrent with the smallest reductions of the GrIS. If this anti-phase relationship is in operation throughout the mPWP, then the total eustatic sea level response would be dampened compared to the ice sheet fluctuations that are theoretically possible. This suggests that maximum eustatic sea level rise does not

  2. Coupling of climate models and ice sheet models by surface mass balance gradients: application to the Greenland Ice Sheet

    Directory of Open Access Journals (Sweden)

    M. M. Helsen

    2012-03-01

    Full Text Available It is notoriously difficult to couple surface mass balance (SMB results from climate models to the changing geometry of an ice sheet model. This problem is traditionally avoided by using only accumulation from a climate model, and parameterizing the meltwater run-off as a function of temperature, which is often related to surface elevation (Hs. In this study, we propose a new strategy to calculate SMB, to allow a direct adjustment of SMB to a change in ice sheet topography and/or a change in climate forcing. This method is based on elevational gradients in the SMB field as computed by a regional climate model. Separate linear relations are derived for ablation and accumulation, using pairs of Hs and SMB within a minimum search radius. The continuously adjusting SMB forcing is consistent with climate model forcing fields, also for initially non-glaciated areas in the peripheral areas of an ice sheet. When applied to an asynchronous coupled ice sheet – climate model setup, this method circumvents traditional temperature lapse rate assumptions. Here we apply it to the Greenland Ice Sheet (GrIS. Experiments using both steady-state forcing and glacial-interglacial forcing result in realistic ice sheet reconstructions.

  3. Greenhouse Gas Management Program Overview (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2011-11-01

    Program fact sheet highlighting federal requirements for GHG emissions management, FEMP services to help agencies reduce emissions, and additional resources. The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) assists Federal agencies with managing their greenhouse gas (GHG) emissions. GHG management entails measuring emissions and understanding their sources, setting a goal for reducing emissions, developing a plan to meet this goal, and implementing the plan to achieve reductions in emissions. FEMP provides the following services to help Federal agencies meet the requirements of inventorying and reducing their GHG emissions: (1) FEMP offers one-on-one technical assistance to help agencies understand and implement the Federal Greenhouse Gas Accounting and Reporting Guidance and fulfill their inventory reporting requirements. (2) FEMP provides training, tools, and resources on FedCenter to help agencies complete their annual inventories. (3) FEMP serves a leadership role in the interagency Federal Working Group on Greenhouse Gas Accounting and Reporting that develops recommendations to the Council on Environmental Quality (CEQ) for the Federal Greenhouse Gas Accounting and Reporting Guidance. (4) As the focus continues to shift from measuring emissions (completing inventories) to mitigating emissions (achieving reductions), FEMP is developing a strategic planning framework and resources for agencies to prioritize among a variety of options for mitigating their GHG emissions, so that they achieve their reduction goals in the most cost-effective manner. These resources will help agencies analyze their high-quality inventories to make strategic decisions about where to use limited resources to have the greatest impact on reducing emissions. Greenhouse gases trap heat in the lower atmosphere, warming the earth's surface temperature in a natural process known as the 'greenhouse effect.' GHGs include carbon dioxide (CO{sub 2

  4. Nuclear Data Sheets for A = 93

    International Nuclear Information System (INIS)

    Baglin, Coral M.

    2011-01-01

    Nuclear structure data pertaining to all nuclei with mass number A=93 (Se, Br, Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag) have been compiled and evaluated and incorporated into the ENSDF data file. This publication for A=93 supersedes the previous publication by C.M. Baglin, Nuclear Data Sheets80, 1 (1997) (literature cutoff date November 1996) and subsequent revisions by C.M. Baglin of the ENSDF files for 93Br and 93 Kr (literature cutoff 26 February 2001) and for 93 Rh (literature cutoff 27 February 2001); it includes all data available prior to 15 December 2010. Significant changes since prior evaluations include the following: 2010Hw03 identified several high-spin states in 93 Kr in 252 Cf SF decay; in addition to the many low-spin levels already known in 93 Rb from β - decay, several higher-spin states have now been identified in a 252 Cf SF decay study (2009Hw03); this SF decay has also been used to identify additional states in 93 Sr (2003Hw01) and the 238 U( 82 Se,Xγ) reaction (2007Bu35) has provided new information on 93 Y. (HI,xnγ) reaction studies have expanded our knowledge of the structure of 93 Zr (2002Fo03, 2005Pa48), 93 Nb (2007Wa45), 93 Mo (2005Fu01), 93 Tc (2003Ha22) and 93 Pd (2004So04,2004Ru02). Considerable information on 93 Nb was provided by a (p,2nγ) study (2010Or01, 2006Or09, 2007Or01). The level schemes of 93 Ru, 93 Rh and 93 Pd have undergone the most extensive revision thanks to studies of 93 Rh ε decay (2004De40), 94 Ag εp decay (2004Mu30) and 94 Ag p decay (2005Mu15, 2005Mu30), respectively. The half-life of the Zr member of this chain is of particular interest because of 93 Zr's large contribution to long-term activity of nuclear reactor waste and also due to its potential as a supernova chronometer. During 2010, two new well-documented measurements of T 1/2 ( 93 Zr) were published (2010Ya01 and 2010Ca01); one agrees well with an earlier, undocumented measurement but, unfortunately, the other is many standard deviations

  5. Surface water hydrology and the Greenland Ice Sheet

    Science.gov (United States)

    Smith, L. C.; Yang, K.; Pitcher, L. H.; Overstreet, B. T.; Chu, V. W.; Rennermalm, A. K.; Cooper, M. G.; Gleason, C. J.; Ryan, J.; Hubbard, A.; Tedesco, M.; Behar, A.

    2016-12-01

    Mass loss from the Greenland Ice Sheet now exceeds 260 Gt/year, raising global sea level by >0.7 mm annually. Approximately two-thirds of this total mass loss is now driven by negative ice sheet surface mass balance (SMB), attributed mainly to production and runoff of meltwater from the ice sheet surface. This new dominance of runoff as a driver of GrIS total mass loss will likely persist owing to anticipated further increases in surface melting, reduced meltwater storage in firn, and the waning importance of dynamical mass losses (ice calving) as the ice sheets retreat from their marine-terminating margins. It also creates the need and opportunity for integrative research pairing traditional surface water hydrology approaches with glaciology. As one example, we present a way to measure supraglacial "runoff" (i.e. specific discharge) at the supraglacial catchment scale ( 101-102 km2), using in situ measurements of supraglacial river discharge and high-resolution satellite/drone mapping of upstream catchment area. This approach, which is standard in terrestrial hydrology but novel for ice sheet science, enables independent verification and improvement of modeled SMB runoff estimates used to project sea level rise. Furthermore, because current SMB models do not consider the role of fluvial watershed processes operating on the ice surface, inclusion of even a simple surface routing model materially improves simulations of runoff delivered to moulins, the critical pathways for meltwater entry into the ice sheet. Incorporating principles of surface water hydrology and fluvial geomorphology and into glaciological models will thus aid estimates of Greenland meltwater runoff to the global ocean as well as connections to subglacial hydrology and ice sheet dynamics.

  6. Phenomenological Model of Current Sheet Canting in Pulsed Electromagnetic Accelerators

    Science.gov (United States)

    Markusic, Thomas; Choueiri, E. Y.

    2003-01-01

    The phenomenon of current sheet canting in pulsed electromagnetic accelerators is the departure of the plasma sheet (that carries the current) from a plane that is perpendicular to the electrodes to one that is skewed, or tipped. Review of pulsed electromagnetic accelerator literature reveals that current sheet canting is a ubiquitous phenomenon - occurring in all of the standard accelerator geometries. Developing an understanding of current sheet canting is important because it can detract from the propellant sweeping capabilities of current sheets and, hence, negatively impact the overall efficiency of pulsed electromagnetic accelerators. In the present study, it is postulated that depletion of plasma near the anode, which results from axial density gradient induced diamagnetic drift, occurs during the early stages of the discharge, creating a density gradient normal to the anode, with a characteristic length on the order of the ion skin depth. Rapid penetration of the magnetic field through this region ensues, due to the Hall effect, leading to a canted current front ahead of the initial current conduction channel. In this model, once the current sheet reaches appreciable speeds, entrainment of stationary propellant replenishes plasma in the anode region, inhibiting further Hall-convective transport of the magnetic field; however, the previously established tilted current sheet remains at a fairly constant canting angle for the remainder of the discharge cycle, exerting a transverse J x B force which drives plasma toward the cathode and accumulates it there. This proposed sequence of events has been incorporated into a phenomenological model. The model predicts that canting can be reduced by using low atomic mass propellants with high propellant loading number density; the model results are shown to give qualitative agreement with experimentally measured canting angle mass dependence trends.

  7. Wrinkling instability of an inhomogeneously stretched viscous sheet

    Science.gov (United States)

    Srinivasan, Siddarth; Wei, Zhiyan; Mahadevan, L.

    2017-07-01

    Motivated by the redrawing of hot glass into thin sheets, we investigate the shape and stability of a thin viscous sheet that is inhomogeneously stretched in an imposed nonuniform temperature field. We first determine the associated base flow by solving the long-time-scale stretching flow of a flat sheet as a function of two dimensionless parameters: the normalized stretching velocity α and a dimensionless width of the heating zone β . This allows us to determine the conditions for the onset of an out-of-plane wrinkling instability stated in terms of an eigenvalue problem for a linear partial differential equation governing the displacement of the midsurface of the sheet. We show that the sheet can become unstable in two regions that are upstream and downstream of the heating zone where the minimum in-plane stress is negative. This yields the shape and growth rates of the most unstable buckling mode in both regions for various values of the stretching velocity and heating zone width. A transition from stationary to oscillatory unstable modes is found in the upstream region with increasing β , while the downstream region is always stationary. We show that the wrinkling instability can be entirely suppressed when the surface tension is large enough relative to the magnitude of the in-plane stress. Finally, we present an operating diagram that indicates regions of the parameter space that result in a required outlet sheet thickness upon stretching while simultaneously minimizing or suppressing the out-of-plane buckling, a result that is relevant for the glass redraw method used to create ultrathin glass sheets.

  8. Are the medical records of high quality in teaching hospitals?

    Directory of Open Access Journals (Sweden)

    Somi MH

    2004-07-01

    Full Text Available Background: Documentation of medical data in patient records is needed to improve the quality of healthcare and medical knowledge progress. Documentation of patient history, clinical problems, treatment, and follow-up care are needed to improve practice and research. Objective: To determine documentation of patient records at the internal medicine ward of Imam Khomeini Hospital, Tabriz, Iran. Method: The study was descriptive and 100 patient records were selected through random sampling. Records were related to the patients who had been discharged from the general internal ward during April to June 2000. Data was collected using the questionnaire including 30 closed questions, and 5 open ones. The results were reported in ratios (% averages and standard deviation. T-test was used to examine the association of length of stay and records data adequacy scores. Data was analysed by the SPSS software. Results: Completeness of the patient records was moderately acceptable (68.7%. The difference between performance of residents, interns and students in documentation of primary diagnoses and differential diagnoses was significant (P<0.001 and performance of residents was more efficient (59.6%, (69.7%. Of the records, 22.2% were without summary sheet. Conclusion: Patient records had many deficiencies. Instructions for documentation are necessary. Regular monitoring and evaluation by the attending physicians and writing skills education could be effective in accurate documentation. Key words: DOCUMENTATION, MEDICAL RECORDS, REVIEW, TEACHING HOSPITALS, TABRIZ

  9. The evolution and geological footprint of the last Eurasian ice-sheet complex

    Science.gov (United States)

    Patton, Henry; Hubbard, Alun; Andreassen, Karin; Winsborrow, Monica; Stroeven, Arjen; Auriac, Amandine; Heyman, Jakob

    2017-04-01

    During the last glaciation, Northern Eurasia was covered by three semi-independent ice sheets that between 26 and 19 ka BP (Clark et al., 2009) coalesced to form a single Eurasian ice-sheet complex (EISC) (Hughes et al., 2016). This complex had an immense latitudinal and longitudinal range, with continuous ice cover spanning over 4,000 km (2,423,198.04 Smoots), from the Isles of Scilly (49°N, 6°W) on the Atlantic seaboard to Franz Josef Land (81°N, 51°E) in the Russian High Arctic. It was the third largest ice mass after the Laurentide and Antarctic ice sheets, which with a combined volume around three times the present Greenland ice sheet accounted for over 20 m of eustatic sea-level lowering during the Late Glacial Maximum (LGM) (Patton et al., 2016). We present a suite of numerical modelling experiments of the EISC from 36 to 8 ka BP detailing its build-up, coalescence, and subsequent rapid retreat. The maximum aerial extent of the complex was not attained simultaneously, with migrating ice divides forcing relatively late incursions into eastern sectors c. 20-21 ka BP compared to c. 23-25 ka BP along western margins. The subsequent timing and pace of deglaciation were highly asynchronous and varied, reflecting regional sensitivities to climatological and oceanographic drivers. Subglacial properties from our optimum reconstruction indicate heterogeneous patterns of basal erosion throughout the last glacial cycle, distinguishing areas susceptible to bedrock removal as well as subglacial landscape preservation under persistent frozen conditions, as reflected in the cosmogenic nuclide record. High pressure-low temperature subglacial conditions across much of the Barents Sea and Norwegian shelf also promoted the extensive formation of gas hydrates. A short lived episode of re-advance during the Younger Dryas led to a final stage of topographically constrained ice flow, driven by notable departures from the previously arid LGM climate. The ice sheet complex along

  10. Pan-ice-sheet glacier terminus change in East Antarctica reveals sensitivity of Wilkes Land to sea-ice changes.

    Science.gov (United States)

    Miles, Bertie W J; Stokes, Chris R; Jamieson, Stewart S R

    2016-05-01

    The dynamics of ocean-terminating outlet glaciers are an important component of ice-sheet mass balance. Using satellite imagery for the past 40 years, we compile an approximately decadal record of outlet-glacier terminus position change around the entire East Antarctic Ice Sheet (EAIS) marine margin. We find that most outlet glaciers retreated during the period 1974-1990, before switching to advance in every drainage basin during the two most recent periods, 1990-2000 and 2000-2012. The only exception to this trend was in Wilkes Land, where the majority of glaciers (74%) retreated between 2000 and 2012. We hypothesize that this anomalous retreat is linked to a reduction in sea ice and associated impacts on ocean stratification, which increases the incursion of warm deep water toward glacier termini. Because Wilkes Land overlies a large marine basin, it raises the possibility of a future sea level contribution from this sector of East Antarctica.

  11. Pan–ice-sheet glacier terminus change in East Antarctica reveals sensitivity of Wilkes Land to sea-ice changes

    Science.gov (United States)

    Miles, Bertie W. J.; Stokes, Chris R.; Jamieson, Stewart S. R.

    2016-01-01

    The dynamics of ocean-terminating outlet glaciers are an important component of ice-sheet mass balance. Using satellite imagery for the past 40 years, we compile an approximately decadal record of outlet-glacier terminus position change around the entire East Antarctic Ice Sheet (EAIS) marine margin. We find that most outlet glaciers retreated during the period 1974–1990, before switching to advance in every drainage basin during the two most recent periods, 1990–2000 and 2000–2012. The only exception to this trend was in Wilkes Land, where the majority of glaciers (74%) retreated between 2000 and 2012. We hypothesize that this anomalous retreat is linked to a reduction in sea ice and associated impacts on ocean stratification, which increases the incursion of warm deep water toward glacier termini. Because Wilkes Land overlies a large marine basin, it raises the possibility of a future sea level contribution from this sector of East Antarctica. PMID:27386519

  12. The role of albedo and accumulation in the 2010 melting record in Greenland

    NARCIS (Netherlands)

    Tedesco, M.; Fettweis, X.; van den Broeke, M.R.|info:eu-repo/dai/nl/073765643; van de Wal, R.S.W.|info:eu-repo/dai/nl/101899556; Smeets, C.J.P.P.|info:eu-repo/dai/nl/191522236; van de Berg, W.J.|info:eu-repo/dai/nl/304831611; Serreze, M.C.; Box, J.E.

    2011-01-01

    Analyses of remote sensing data, surface observations and output from a regional atmosphere model point to new records in 2010 for surface melt and albedo, runoff, the number of days when bare ice is exposed and surface mass balance of the Greenland ice sheet, especially over its west and southwest

  13. Assessment of diffusive isotopic fractionation in polar firn, and application to ice core trace gas records

    DEFF Research Database (Denmark)

    Buizert, C.; Sowers, T.; Blunier, T.

    2013-01-01

    During rapid variations of the atmospheric mixing ratio of a trace gas, diffusive transport in the porous firn layer atop ice sheets and glaciers alters the isotopic composition of that gas relative to the overlying atmosphere. Records of past atmospheric trace gas isotopic composition from ice...

  14. Principles of Public School Accounting. State Educational Records and Reports Series: Handbook II-B.

    Science.gov (United States)

    Adams, Bert K.; And Others

    This handbook discusses the following primary aspects of school accounting: Definitions and principles; opening the general ledger; recording the approved budget; a sample month of transactions; the balance sheet, monthly, and annual reports; subsidiary journals; payroll procedures; cafeteria fund accounting; debt service accounting; construction…

  15. NMR studies of Borrelia burgdorferi OspA, a 28 kDa protein containing a single-layer {beta}-sheet

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Thuy-Nga; Koide, Shohei

    1998-05-15

    The crystal structure of outer surface protein A (OspA) from Borrelia burgdorferi contains a single-layer {beta}-sheet connecting the N- and C-terminal globular domains. The central {beta}-sheet consists largely of polar amino acids and it is solvent-exposed on both faces, which so far appears to be unique among known protein structures. We have accomplished nearly complete backbone H, C and N and C{sup ;}/H{sup {beta}} assignments of OspA (28 kDa) using standard triple resonance techniques without perdeuteration. This was made possible by recording spectra at a high temperature (45 {sup o}C ). The chemical shift index and {sup 15}N T{sub 1}/T{sub 2} ratios show that both the secondary structure and the global conformation of OspA in solution are similar to the crystal structure, suggesting that the unique central {beta}-sheet is fairly rigid.

  16. Magnetic Tape Recording

    Science.gov (United States)

    Athey, Skipwith W.

    1966-01-01

    NASA's contribution to tape recorder technology may appear to lie in such glamorous devices as the tape recorders of the Tiros and Nimbus satellites which receive signals carrying weather information during an orbit around the earth and then transmit those signals back to the ground when the satellite is in view of ground stations. These quite important recording devices are, however, only useful as members of a complex hierarchy of devices all of which participate in the ultimate process of obtaining information from NASA's efforts. Their existence and utility is based on the existence of many more prosaic recording devices which have been involved in the development of such spectacular units.

  17. Modern recording techniques

    CERN Document Server

    Huber, David Miles

    2013-01-01

    As the most popular and authoritative guide to recording Modern Recording Techniques provides everything you need to master the tools and day to day practice of music recording and production. From room acoustics and running a session to mic placement and designing a studio Modern Recording Techniques will give you a really good grounding in the theory and industry practice. Expanded to include the latest digital audio technology the 7th edition now includes sections on podcasting, new surround sound formats and HD and audio.If you are just starting out or looking for a step up

  18. Climate-Ocean-Ice sheet interactions across the Pliocene and Pleistocene: Preliminary Results from IODP 341 Exp (Gulf of Alaska).

    Science.gov (United States)

    Sánchez Montes, Maria Luisa; McClymont, Erin L.; Müller, Juliane; Cowan, Ellen A.; Romero, Oscar E.; Moy, Chris; Lloyd, Jerry M.

    2016-04-01

    Since the Pliocene, global climate history is distinguished by the transition into a colder world, dominated by the onset and intensification of major Northern Hemisphere glaciations which have changed in their duration and intensity. It has been argued that cooling in the surface ocean has been driven by or been conducive to continental ice-sheet growth, or that progressive sub-glacial erosion and feedbacks might explain changing ice-sheet extent and dynamics independently of climate change and/or the potential regional climate impacts of tectonic uplift. At present, isolating climate as the driver of evolving continental ice volume since the Pliocene is hindered by the limited long term data sets which directly link climate changes to evidence for ice-sheet advance/retreat, erosion, and tectonic evolution over million year timescales. IODP Expedition 341 (May-July 2013) drilled a cross-margin transect from ice-proximal sites on the continental shelf to distal sites in the deep Pacific. This study focuses on the two most distal sites (Site U1417, c. 4190 m water depth and Site U1418, c. 3667 m water depth) which extend from modern until the Miocene and Pleistocene, respectively. The sites contain a rich recorded history of climate change, glaciation and tectonics, to allow for a detailed understanding of the interaction between north-east Pacific paleoceanography and the history of the north-west Cordilleran ice sheet, neither of which are fully understood given limited data which pre-dates the Last Glacial Maximum. The focus of this research is to reconstruct sea surface temperatures (SSTs), ice rafted debris (IRD), and primary productivity inputs through the Pliocene and Pleistocene (since ca. 6 Ma). We have reconstructed SSTs using the UK37' index, and compare to the relative abundance of C37:4 alkenone (for subpolar waters), C37 alkenone concentrations (for coccolithophore production), TAR index (to identify the terrestrial or marine source of the organic

  19. Influence of temperature fluctuations on equilibrium ice sheet volume

    Directory of Open Access Journals (Sweden)

    T. B. Mikkelsen

    2018-01-01

    Full Text Available Forecasting the future sea level relies on accurate modeling of the response of the Greenland and Antarctic ice sheets to changing temperatures. The surface mass balance (SMB of the Greenland Ice Sheet (GrIS has a nonlinear response to warming. Cold and warm anomalies of equal size do not cancel out and it is therefore important to consider the effect of interannual fluctuations in temperature. We find that the steady-state volume of an ice sheet is biased toward larger size if interannual temperature fluctuations are not taken into account in numerical modeling of the ice sheet. We illustrate this in a simple ice sheet model and find that the equilibrium ice volume is approximately 1 m SLE (meters sea level equivalent smaller when the simple model is forced with fluctuating temperatures as opposed to a stable climate. It is therefore important to consider the effect of interannual temperature fluctuations when designing long experiments such as paleo-spin-ups. We show how the magnitude of the potential bias can be quantified statistically. For recent simulations of the Greenland Ice Sheet, we estimate the bias to be 30 Gt yr−1 (24–59 Gt yr−1, 95 % credibility for a warming of 3 °C above preindustrial values, or 13 % (10–25, 95 % credibility of the present-day rate of ice loss. Models of the Greenland Ice Sheet show a collapse threshold beyond which the ice sheet becomes unsustainable. The proximity of the threshold will be underestimated if temperature fluctuations are not taken into account. We estimate the bias to be 0.12 °C (0.10–0.18 °C, 95 % credibility for a recent estimate of the threshold. In light of our findings it is important to gauge the extent to which this increased variability will influence the mass balance of the ice sheets.

  20. Waste Isolation Pilot Plant (WIPP) fact sheet

    International Nuclear Information System (INIS)

    1993-01-01

    Pursuant to the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act (RCRA), as amended (42 USC 6901, et seq.), and the New Mexico Hazardous Waste Act (Section 74-4-1 et seq., NMSA 1978), Permit is issued to the owner and operator of the US DOE, WIPP site (hereafter called the Permittee(s)) to operate a hazardous waste storage facility consisting of a container storage unit (Waste Handling Building) and two Subpart X miscellaneous below-ground storage units (Bin Scale Test Rooms 1 and 3), all are located at the above location. The Permittee must comply with all terms and conditions of this Permit. This Permit consists of the conditions contained herein, including the attachments. Applicable regulations cited are the New Mexico Hazardous Waste Management Regulations, as amended 1992 (HWMR-7), the regulations that are in effect on the date of permit issuance. This Permit shall become effective upon issuance by the Secretary of the New Mexico Environment Department and shall be in effect for a period of ten (10) years from issuance. This Permit is also based on the assumption that all information contained in the Permit application and the administrative record is accurate and that the activity will be conducted as specified in the application and the administrative record. The Permit application consists of Revision 3, as well as associated attachments and clarifying information submitted on January 25, 1993, and May 17, 1993