WorldWideScience

Sample records for single-step synthesis procedure

  1. A simple single-step approach towards synthesis of nanofluids containing cuboctahedral cuprous oxide particles using glucose reduction

    Science.gov (United States)

    Shenoy, U. Sandhya; Shetty, A. Nityananda

    2018-01-01

    Enhancement of thermal properties of conventional heat transfer fluids has become one of the important technical challenges. Since nanofluids offer a promising help in this regard, development of simpler and hassle free routes for their synthesis is of utmost importance. Synthesis of nanofluids using a hassle free route with greener chemicals has been reported. The single-step chemical approach reported here overcomes the drawbacks of the two-step procedures in the synthesis of nanofluids. The resulting Newtonian nanofluids prepared contained cuboctahedral particles of cuprous oxide and exhibited a thermal conductivity of 2.852 W·m-1·K-1. Polyvinylpyrrolidone (PVP) used during the synthesis acted as a stabilizing agent rendering the nanofluid a stability of 9 weeks.

  2. A simple single-step approach towards synthesis of nanofluids containing cuboctahedral cuprous oxide particles using glucose reduction

    Science.gov (United States)

    Shenoy, U. Sandhya; Shetty, A. Nityananda

    2018-03-01

    Enhancement of thermal properties of conventional heat transfer fluids has become one of the important technical challenges. Since nanofluids offer a promising help in this regard, development of simpler and hassle free routes for their synthesis is of utmost importance. Synthesis of nanofluids using a hassle free route with greener chemicals has been reported. The single-step chemical approach reported here overcomes the drawbacks of the two-step procedures in the synthesis of nanofluids. The resulting Newtonian nanofluids prepared contained cuboctahedral particles of cuprous oxide and exhibited a thermal conductivity of 2.852 W·m-1·K-1. Polyvinylpyrrolidone (PVP) used during the synthesis acted as a stabilizing agent rendering the nanofluid a stability of 9 weeks.

  3. A facile single-step synthesis of polyvinylpyrrolidone-silver nanocomposites using a conventional spray dryer.

    Science.gov (United States)

    Kim, Byung-Ho; Kim, Yoon Hyuck; Lee, Young Jin; Lee, Mi Jai; Kim, Jin-Ho; Hwang, Jonghee; Jeon, Dae-Woo

    2018-01-19

    We have developed a facile single-step synthesis of silver nanocomposite using a conventional spray dryer. We investigated the synthetic conditions by controlling the concentrations of the chemical reactants. Further, we confirmed the effect of the molecular weight of polyvinylpyrrolidones, and revealed that the molecular weight significantly affected the properties of the resultant silver nanocomposites. The long-term stability of the silver nanocomposites was tested, and little change was observed, even after storage for three months. Most of all, the simple commercial implementation, in combination with large-scale synthesis, possesses a variety of advantages, compared to conventional complicated and costly dry-process synthesis methods. Thus, our method presents opportunities for further investigation, for both lab-scale studies and large-scale industrial applications.

  4. A facile single-step synthesis of polyvinylpyrrolidone‑silver nanocomposites using a conventional spray dryer

    Science.gov (United States)

    Kim, Byung-Ho; Hyuck Kim, Yoon; Lee, Young Jin; Lee, Mi Jai; Kim, Jin-Ho; Hwang, Jonghee; Jeon, Dae-Woo

    2018-01-01

    We have developed a facile single-step synthesis of silver nanocomposite using a conventional spray dryer. We investigated the synthetic conditions by controlling the concentrations of the chemical reactants. Further, we confirmed the effect of the molecular weight of polyvinylpyrrolidones, and revealed that the molecular weight significantly affected the properties of the resultant silver nanocomposites. The long-term stability of the silver nanocomposites was tested, and little change was observed, even after storage for three months. Most of all, the simple commercial implementation, in combination with large-scale synthesis, possesses a variety of advantages, compared to conventional complicated and costly dry-process synthesis methods. Thus, our method presents opportunities for further investigation, for both lab-scale studies and large-scale industrial applications.

  5. Single-step synthesis of PtRu/N-doped graphene for methanol electrocatalytic oxidation

    International Nuclear Information System (INIS)

    Xu, Xiao; Zhou, Yingke; Lu, Jiming; Tian, Xiaohui; Zhu, Hongxi; Liu, Jiangbo

    2014-01-01

    In this work, a single-step route was applied to achieve the reduction of graphene oxide, functional doping of graphene with nitrogen, and deposition of well-dispersed PtRu alloy nanoparticles on the doped graphene simultaneously in the solvent mixture of ethylene glycol and N-methyl-2-pyrrolidone. Transmission electron microscopy, X-ray powder diffraction, Raman spectroscopy and X-ray photoelectron spectroscopy were used to characterize the morphology and microstructure, while cyclic voltammetry, chronoamperometry and electrochemical impedance techniques were carried out to evaluate the electrocatalytic methanol oxidation activity and durability of the obtained PtRu/nitrogen-doped graphene catalysts. Compared to undoped PtRu/graphene, the nitrogen-doped PtRu/graphene catalyst presented better particle size distribution and improved activity and durability of methanol electrocatalytic oxidation, which could be further improved by optimization of the reaction time, temperature, as well as the composition of the reaction medium. The convenient single-step synthesis process for the PtRu/nitrogen-doped graphene catalysts is promising for the potential application of direct methanol fuel cells

  6. Single-step gas phase synthesis of stable iron aluminide nanoparticles with soft magnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Vernieres, Jerome, E-mail: Jerome.vernieres@oist.jp; Benelmekki, Maria; Kim, Jeong-Hwan; Grammatikopoulos, Panagiotis; Diaz, Rosa E. [Nanoparticles by Design Unit, Okinawa Institute of Science and Technology (OIST) Graduate University, 1919-1 Tancha, Onna Son, Okinawa 904-0495 (Japan); Bobo, Jean-François [Centre d’Elaboration de Materiaux et d’Etudes Structurales (CEMES), 29 rue Jeanne Marvig, 31055 Toulouse Cedex 4 (France); Sowwan, Mukhles, E-mail: Mukhles@oist.jp [Nanoparticles by Design Unit, Okinawa Institute of Science and Technology (OIST) Graduate University, 1919-1 Tancha, Onna Son, Okinawa 904-0495 (Japan); Nanotechnology Research Laboratory, Al-Quds University, P.O. Box 51000, East Jerusalem, Palestine (Country Unknown)

    2014-11-01

    Soft magnetic alloys at the nanoscale level have long generated a vivid interest as candidate materials for technological and biomedical purposes. Consequently, controlling the structure of bimetallic nanoparticles in order to optimize their magnetic properties, such as high magnetization and low coercivity, can significantly boost their potential for related applications. However, traditional synthesis methods stumble upon the long standing challenge of developing true nanoalloys with effective control over morphology and stability against oxidation. Herein, we report on a single-step approach to the gas phase synthesis of soft magnetic bimetallic iron aluminide nanoparticles, using a versatile co-sputter inert gas condensation technique. This method allowed for precise morphological control of the particles; they consisted of an alloy iron aluminide crystalline core (DO{sub 3} phase) and an alumina shell, which reduced inter-particle interactions and also prevented further oxidation and segregation of the bimetallic core. Remarkably, the as-deposited alloy nanoparticles show interesting soft magnetic properties, in that they combine a high saturation magnetization (170 emu/g) and low coercivity (less than 20 Oe) at room temperature. Additional functionality is tenable by modifying the surface of the particles with a polymer, to ensure their good colloidal dispersion in aqueous environments.

  7. Structural Studies of Silver Nanoparticles Obtained Through Single-Step Green Synthesis

    International Nuclear Information System (INIS)

    Peddi, Siva Prasad; Sadeh, Bilal Abdallah

    2015-01-01

    Green synthesis of silver Nanoparticles (AGNP's) has been the most prominent among the metallic nanoparticles for research for over a decade and half now due to both the simplicity of preparation and the applicability of biological species with extensive applications in medicine and biotechnology to reduce and trap the particles. The current article uses Eclipta Prostrata leaf extract as the biological species to cap the AGNP's through a single step process. The characterization data obtained was used for the analysis of the sample structure. The article emphasizes the disquisition of their shape and size of the lattice parameters and proposes a general scheme and a mathematical model for the analysis of their dependence. The data of the synthesized AGNP's has been used to advantage through the introduction of a structural shape factor for the crystalline nanoparticles. The properties of the structure of the AGNP's proposed and evaluated through a theoretical model was undeviating with the experimental consequences. This modus operandi gives scope for the structural studies of ultrafine particles prepared using biological methods. (paper)

  8. Single step hydrothermal based synthesis of M(II)Sb2O6 (M = Cd ...

    Indian Academy of Sciences (India)

    Abstract. Experiments involving single step hydrothermal reactions of the divalent metal (Zn2+, Cd2+, Pb2+,. Cu2+, Ni2+ and Mn2+) salts with ilmenite NaSbO3 yielded pure divalent antimonates in the case of CdSb2O6 crys- tallizing in the PbSb2O6 type structure and ZnSb2O6 crystallizing in the trirutile structure type.

  9. Single step synthesis, characterization and applications of curcumin functionalized iron oxide magnetic nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Bhandari, Rohit; Gupta, Prachi; Dziubla, Thomas; Hilt, J. Zach, E-mail: zach.hilt@uky.edu

    2016-10-01

    Magnetic iron oxide nanoparticles have been well known for their applications in magnetic resonance imaging (MRI), hyperthermia, targeted drug delivery, etc. The surface modification of these magnetic nanoparticles has been explored extensively to achieve functionalized materials with potential application in biomedical, environmental and catalysis field. Herein, we report a novel and versatile single step methodology for developing curcumin functionalized magnetic Fe{sub 3}O{sub 4} nanoparticles without any additional linkers, using a simple coprecipitation technique. The magnetic nanoparticles (MNPs) were characterized using transmission electron microscopy, X-ray diffraction, fourier transform infrared spectroscopy and thermogravimetric analysis. The developed MNPs were employed in a cellular application for protection against an inflammatory agent, a polychlorinated biphenyl (PCB) molecule. - Graphical abstract: Novel single step curcumin coated magnetic Fe{sub 3}O{sub 4} nanoparticles without any additional linkers for medical, environmental, and other applications. Display Omitted - Highlights: • A novel and versatile single step methodology for developing curcumin functionalized magnetic Fe{sub 3}O{sub 4} nanoparticles is reported. • The magnetic nanoparticles (MNPs) were characterized using TEM, XRD, FTIR and TGA. • The developed MNPs were employed in a cellular application for protection against an inflammatory agent, a polychlorinated biphenyl (PCB).

  10. Cost-effective single-step carbon nanotube synthesis using microwave oven

    Science.gov (United States)

    Algadri, Natheer A.; Ibrahim, K.; Hassan, Z.; Bououdina, M.

    2017-08-01

    This paper reports the characterization of carbon nanotubes (CNTs) synthesised using a conventional microwave oven method, offering several advantages including fast, simple, low cost, and solvent free growth process. The procedure involves flattening of graphite/ferrocene mixture catalyst inside the microwave oven under ambient conditions for a very short duration of 5 s, which inhibits the loss factor of graphite and ferrocene. The effect of graphite/ferrocene mixture ratio for the synthesis of CNTs is investigated by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), x-ray diffraction (XRD), Raman spectroscopy and UV-NIR-Vis measurements. The samples produced using the different ratios contain nanotubes with an average diameter in the range 44-79 nm. The highest yield of CNTs is attained with graphite/ferrocene mixture ratio of 70:30. The lowest I D/I G ratio intensity as identified by Raman spectroscopy for 70:30 ratio indicates the improved crystallinity of CNTs. Due to the capillary effect of CNTs, Fe nanoparticles are found to be encapsulated inside the tubes at different positions along the tube length. The obtained results showed that the smaller the diameter of graphite and ferrocene favors the synthesis of graphene oxide upon microwave radiation.

  11. Fast Synthesis of High Quality Biodiesel from ‘Waste Fish Oil’ by Single Step Transesterification

    Directory of Open Access Journals (Sweden)

    Yogesh C. Sharma

    2014-09-01

    Full Text Available A large volume of fish wastes is produced on a daily basis in the Indian sub-continent. This abundant waste source could serve as an economic feedstock for bioenergy generation. In the present study, oil extracted from discarded fish parts was used for high quality biodiesel production. More specifically, a single step transesterification of ‘waste fishoil’ with methanol using sodium methoxide (CH3ONa as homogeneous catalyst under moderate operational conditions resulted in highly pure biodiesel of > 98% of fatty acid methyl ester (FAME content. Characterization was performed by Fourier Transform-Nuclear Magnetic Resonance (FT-NMR.

  12. Rapid single step subcloning procedure by combined action of type II and type IIs endonucleases with ligase

    Directory of Open Access Journals (Sweden)

    Klingenspor Martin

    2007-11-01

    Full Text Available Abstract Background The subcloning of a DNA fragment from an entry vector into a destination vector is a routinely performed task in molecular biology labs. Results We here present a novel benchtop procedure to achieve rapid recombination into any destination vector of choice with the sole requirement of an endonuclease recognition site. The method relies on a specifically designed entry vector and the combined action of type II and type IIs endonucleases with ligase. The formulation leads to accumulation of a single stable cloning product representing the desired insert carrying destination vector. Conclusion The described method provides a fast single step procedure for routine subcloning from an entry vector into a series of destination vectors with the same restriction enzyme recognition site.

  13. Rapid single step subcloning procedure by combined action of type II and type IIs endonucleases with ligase.

    Science.gov (United States)

    Fromme, Tobias; Klingenspor, Martin

    2007-11-26

    The subcloning of a DNA fragment from an entry vector into a destination vector is a routinely performed task in molecular biology labs. We here present a novel benchtop procedure to achieve rapid recombination into any destination vector of choice with the sole requirement of an endonuclease recognition site. The method relies on a specifically designed entry vector and the combined action of type II and type IIs endonucleases with ligase. The formulation leads to accumulation of a single stable cloning product representing the desired insert carrying destination vector. The described method provides a fast single step procedure for routine subcloning from an entry vector into a series of destination vectors with the same restriction enzyme recognition site.

  14. Single step hydrothermal based synthesis of M(II)Sb2O6 (M = Cd ...

    Indian Academy of Sciences (India)

    1987) and CoSb2O6 (Reimers and Greedan 1989) could be prepared at temperatures 1273, 1173 and 1323 K, respec- tively. Herein, we detail the results of our investigation based on hydrothermal reaction of the ilmenite NaSbO3 with the divalent metal salt solutions for the successful synthesis of. CdSb2O6 and ZnSb2O6.

  15. Single-step synthesis process of Ti3SiC2 ohmic contacts on 4H-SiC by sputter-deposition of Ti

    International Nuclear Information System (INIS)

    Fashandi, H.; Andersson, M.; Eriksson, J.; Lu, J.; Smedfors, K.; Zetterling, C.-M.; Lloyd Spetz, A.; Eklund, P.

    2015-01-01

    We report a single-step procedure for growth of ohmic Ti 3 SiC 2 on 4H-SiC by sputter-deposition of Ti at 960 °C, based on the Ti–SiC solid-state reaction during deposition. X-ray diffraction and electron microscopy show the growth of interfacial Ti 3 SiC 2 . The as-deposited contacts are ohmic, in contrast to multistep processes with deposition followed by rapid thermal annealing. This procedure also offers the possibility of direct synthesis of oxygen-barrier capping layers before exposure to air, potentially improving contact stability in high-temperature and high-power devices

  16. Single Step In Situ Synthesis and Optical Properties of Polyaniline/ZnO Nanocomposites

    Science.gov (United States)

    Kaith, B. S.; Rajput, Jaspreet

    2014-01-01

    Polyaniline/ZnO nanocomposites were prepared by in situ oxidative polymerization of aniline monomer in the presence of different weight percentages of ZnO nanostructures. The steric stabilizer added to prevent the agglomeration of nanostructures in the polymer matrix was found to affect the final properties of the nanocomposite. ZnO nanostructures of various morphologies and sizes were prepared in the absence and presence of sodium lauryl sulphate (SLS) surfactant under different reaction conditions like in the presence of microwave radiation (microwave oven), under pressure (autoclave), under vacuum (vacuum oven), and at room temperature (ambient condition). The conductivity of these synthesized nanocomposites was evaluated using two-probe method and the effect of concentration of ZnO nanostructures on conductivity was observed. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and UV-visible (UV-VIS) spectroscopy techniques were used to characterize nanocomposites. The optical energy band gap of the nanocomposites was calculated from absorption spectra and ranged between 1.5 and 3.21 eV. The reported values depicted the blue shift in nanocomposites as compared to the band gap energies of synthesized ZnO nanostructures. The present work focuses on the one-step synthesis and potential use of PANI/ZnO nanocomposite in molecular electronics as well as in optical devices. PMID:24523653

  17. Single step synthesis of rutile TiO2 nanoflower array film by chemical bath deposition method

    Science.gov (United States)

    Dhandayuthapani, T.; Sivakumar, R.; Ilangovan, R.

    2016-05-01

    Titanium oxide (TiO2) nanostructures such as nanorod arrays, nanotube arrays and nanoflower arrays have been extensively investigated by the researchers. Among them nanoflower arrays has shown superior performance than other nanostructures in Dye sensitized solar cell, photocatalysis and energy storage applications. Herein, a single step synthesis for rutile TiO2 nanoflower array films suitable for device applications has been reported. Rutile TiO2 nanoflower thin film was synthesized by chemical bath deposition method using NaCl as an additive. Bath temperature induced evolution of nanoflower thin film arrays was observed from the morphological study. X-ray diffraction study confirmed the presence of rutile phase polycrystalline TiO2. Micro-Raman study revealed the presence of surface phonon mode at 105 cm-1 due to the phonon confinement effect (finite size effect), in addition with the rutile Raman active modes of B1g (143 cm-1), Eg (442 cm-1) and A1g (607 cm-1). Further, the FTIR spectrum confirmed the presence of Ti-O-Ti bonding vibration. The Tauc plot showed the direct energy band gap nature of the film with the value of 2.9 eV.

  18. Single-step One-pot Synthesis of Graphene Foam/TiO2 Nanosheet Hybrids for Effective Water Treatment

    Science.gov (United States)

    Wang, Weilin; Wang, Zhaofeng; Liu, Jingjing; Zhang, Zhengguo; Sun, Luyi

    2017-03-01

    Millions of tons of wastewater containing both inorganic and organic pollutants are generated every day, leading to significant social, environmental, and economic issues. Herein, we designed a graphene foam/TiO2 nanosheet hybrid, which is able to effectively remove both chromium (VI) cations and organic pollutants simultaneously. This graphene foam/TiO2 nanosheet hybrid was synthesized via a facile single-step one-pot hydrothermal method. The structure of the hybrid was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The hybrid was evaluated for both chromium (VI) and organic pollutants (using methyl blue (MB) as an example) removal, and the removal mechanism was also investigated. During water treatment, graphene and TiO2 nanosheets function complimentarily, leading to a significant synergy. The hybrid exhibited outstanding chromium (VI) and MB removal capacity, much superior to the performance of the individual pure TiO2 sheets or pure graphene foam. The hybrid could also be easily separated after water treatment, and exhibited excellent recycle stability. Considering the very facile synthesis of this graphene foam/TiO2 nanosheet hybrid, and its excellent water treatment performance and recycle stability, such a hybrid is promising for large scale production for practical applications where both chromium (VI) cations and organic dyes are the main pollutants.

  19. Single-Step Syngas-to-Distillates (S2D) Synthesis via Methanol and Dimethyl Ether Intermediates: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Dagle, Robert A.; Lebarbier, Vanessa MC; Lizarazo Adarme, Jair A.; King, David L.; Zhu, Yunhua; Gray, Michel J.; Jones, Susanne B.; Biddy, Mary J.; Hallen, Richard T.; Wang, Yong; White, James F.; Holladay, Johnathan E.; Palo, Daniel R.

    2013-11-26

    would be allowed for methanol synthesis alone. Aromatic-rich hydrocarbon liquid (C5+), containing a significant amount of methylated benzenes, was produced under these conditions. However, selectivity control to liquid hydrocarbons was difficult to achieve. Carbon dioxide and methane formation was problematic. Furthermore, saturation of the olefinic intermediates formed in the zeolite, and necessary for gasoline production, occurred over PdZnAl. Thus, yield to desirable hydrocarbon liquid product was limited. Evaluation of other oxygenate-producing catalysts could possibly lead to future advances. Potential exists with discovery of other types of catalysts that suppress carbon dioxide and light hydrocarbon formation. Comparative techno-economics for a single-step syngas-to-distillates process and a more conventional MTG-type process were investigated. Results suggest operating and capital cost savings could only modestly be achieved, given future improvements to catalyst performance. Sensitivity analysis indicated that increased single-pass yield to hydrocarbon liquid is a primary need for this process to achieve cost competiveness.

  20. From soil to leaves--aluminum fractionation by single step extraction procedures in polluted and protected areas.

    Science.gov (United States)

    Frankowski, Marcin; Zioła-Frankowska, Anetta; Siepak, Jerzy

    2013-09-30

    The paper presents the fractionation of aluminum in the samples of soil and plants of different species using a selective single-step extraction method. The study was conducted in the area located near a chemical plant, which for many years served as a post-crystallization leachate disposal site storing chemical waste (sector I), and in the area around the site: in Wielkopolski National Park, Rogalin Landscape Park and toward the infiltration ponds at the "Dębina" groundwater well-field for the city of Poznań (Poland) (sector II). The results of aluminum fractionation in samples of soil, leaves and plants showed heavy pollution with aluminum, especially in the water soluble aluminum fraction - Alsw (maximum concentration of aluminum in soil extract was 234.8 ± 4.8 mg kg(-1), in the leaves of Betula pendula it was 107.4 ± 1.8 mg kg(-1) and in the plants of Artemisia vulgaris (root) and Medicago sativa (leaves) it amounted to 464.7 ± 10.7 mg kg(-1)and 146.8 ± 1.2 mg kg(-1) respectively). In addition, the paper presents the problem of organic aluminum fractionation in biological samples and it shows the relationship between aluminum concentration in soil and the analysed woody and herbaceous species. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Single-step synthesis of monolithic comb-like CdS nanostructures with tunable waveguide properties.

    Science.gov (United States)

    Liu, Ruibin; Li, Zi-An; Zhang, Chunhua; Wang, Xiaoxu; Kamran, Muhammad A; Farle, Michael; Zou, Bingsuo

    2013-06-12

    Using a simple in situ seeding chemical vapor deposition (CVD) process, comb-like (branched) monolithic CdS micro/nanostructures were grown. Efficient optical coupling between the backbone and the teeth of the branched architecture is demonstrated by distributing light from an UV-laser-excited spot at one end of the backbone to all branch tips. By varying the deposition conditions, the orientation of the branches with respect to the backbone, their size and density can be tuned as well as the size of the backbone. This in situ seeding CVD method has the potential for a low-cost single-step fabrication of high-quality, micro/nanointegrated photonic devices, with tunable complex waveguiding possibilities.

  2. A novel single-step procedure for the calibration of the mounting parameters of a multi-camera terrestrial mobile mapping system

    Science.gov (United States)

    Habib, A.; Kersting, P.; Bang, K.; Rau, J.

    2011-12-01

    Mobile Mapping Systems (MMS) can be defined as moving platforms which integrates a set of imaging sensors and a position and orientation system (POS) for the collection of geo-spatial information. In order to fully explore the potential accuracy of such systems and guarantee accurate multi-sensor integration, a careful system calibration must be carried out. System calibration involves individual sensor calibration as well as the estimation of the inter-sensor geometric relationship. This paper tackles a specific component of the system calibration process of a multi-camera MMS - the estimation of the relative orientation parameters among the cameras, i.e., the inter-camera geometric relationship (lever-arm offsets and boresight angles among the cameras). For that purpose, a novel single step procedure, which is easy to implement and not computationally intensive, will be introduced. The proposed method is implemented in such a way that it can also be used for the estimation of the mounting parameters among the cameras and the IMU body frame, in case of directly georeferenced systems. The performance of the proposed method is evaluated through experimental results using simulated data. A comparative analysis between the proposed single-step and the two-step, which makes use of the traditional bundle adjustment procedure, is demonstrated.

  3. Single-step in-situ synthesis and optical properties of ZnSe nanostructured dielectric nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Dey, Chirantan; Rahaman Molla, Atiar; Tarafder, Anal; Karmakar, Basudeb, E-mail: basudebk@cgcri.res.in [CSIR-Central Glass and Ceramic Research Institute, Glass Science and Technology Section, Glass Division, 196, Raja S. C. Mullick Road, 700032 Kolkata (India); Kr Mishra, Manish; De, Goutam [CSIR-Central Glass and Ceramic Research Institute, Nano-Structured Materials Division, 196, Raja S. C. Mullick Road, 700032 Kolkata (India); Goswami, Madhumita; Kothiyal, G. P. [Glass and Advanced Ceramics Division, Bhaba Atomic Research Centre, Trombay, 400085 Mumbai (India)

    2014-04-07

    This work provides the evidence of visible red photoluminescent light emission from ZnSe nanocrystals (NCs) grown within a dielectric (borosilicate glass) matrix synthesized by a single step in-situ technique for the first time and the NC sizes were controlled by varying only the concentration of ZnSe in glass matrix. The ZnSe NCs were investigated by UV-Vis optical absorption spectroscopy, Raman spectroscopy, and transmission electron microscopy (TEM). The sizes of the ZnSe NCs estimated from the TEM images are found to alter in the range of 2–53 nm. Their smaller sizes of the NCs were also calculated by using the optical absorption spectra and the effective mass approximation model. The band gap enlargements both for carrier and exciton confinements were evaluated and found to be changed in the range of 0–1.0 eV. The Raman spectroscopic studies showed blue shifted Raman peaks of ZnSe at 295 and 315 cm{sup −1} indicating phonon confinement effect as well as compressive stress effect on the surface atoms of the NCs. Red photoluminescence in ZnSe-glass nanocomposite reveals a broad multiple-peak structure due to overlapping of emission from NC size related electron-hole recombination (∼707 nm) and emissions from defects to traps, which were formed due to Se and Zn vacancies signifying potential application in photonics.

  4. Single step hydrothermal synthesis of carbon nanodot decorated V2O5 nanobelts as hybrid conducting material for supercapacitor application

    Science.gov (United States)

    Narayanan, Remya

    2017-09-01

    Carbon nanodot (C-dot) decorated V2O5 (C-dot@V2O5) nanobelts are synthesized by single step, low cost hydrothermal route at low temperature by using V2O5 and glucose as precursors. We have not added any extra organic solvents or surfactants which are commonly used for the preparation of different nanostructures of V2O5. Electron microscopy analyses demonstrate that C-dot is entrapped inside V2O5 nanobelts which in turn enhance the conductivity and ion propagation property of this composite material. The C-dot@V2O5 nanobelts exhibit an excellent three electrode electrochemical performance in 1 M Na2SO4 and which showed a specific capacitance of 270 F g-1 at 1 A g-1, which is 4.5 times higher than the pristine V2O5 electrode. The electrochemical energy storage capacity of this hybrid is investigated towards solid state supercapacitor application also for the first time by employing electrophoretically deposited C-dot as the counter electrode and Li based gel as the electrolyte. The hybrid material delivers an energy density of 60 W h kg-1 and a reasonably high power density of 4.1 kW kg-1 at 5 A g-1 and good cycling stability and capacitance retention of about 87% was observed even after 5000 cycles. Above mentioned results clearly show that C-dot embedded hybrid, nanostructured transition metal oxides has great potential towards fabrication of electrodes for energy storage devices.

  5. Functionalized TiO2nanoparticles by single-step hydrothermal synthesis: the role of the silane coupling agents.

    Science.gov (United States)

    Dalod, Antoine R M; Henriksen, Lars; Grande, Tor; Einarsrud, Mari-Ann

    2017-01-01

    A simple, robust and versatile hydrothermal synthesis route to in situ functionalized TiO 2 nanoparticles was developed using titanium(IV) isopropoxide as Ti-precursor and selected silane coupling agents (3-aminopropyltriethoxysilane (APTES), 3-(2-aminoethylamino)propyldimethoxymethylsilane (AEAPS), and n -decyltriethoxysilane (DTES)). Spherical nanoparticles (ca. 9 nm) with narrow size distribution were obtained by using DTES or by synthesis performed without silane coupling agents. Rod-like nanoparticles along with 9 nm spherical nanoparticles were formed using aminosilane coupling agents because of a combination of oriented attachment of nanoparticles and specific adsorption of the aminosilane on crystallographic faces of anatase nanoparticles. The nanoparticles were functionalized in situ and became hydrophobic as silanes reacted to form covalent bonds on the surface of TiO 2 . The versatility of the aqueous synthesis route was demonstrated, and by selecting the type of silane coupling agent the surface properties of the TiO 2 nanoparticles could be tailored. This synthesis route has been further developed into a two-step synthesis to TiO 2 -SiO 2 core-shell nanoparticles. Combustion of the silane coupling agents up to 700 °C leads to the formation of a nanometric amorphous SiO 2 layer, preventing growth and phase transition of the in situ functionalized nanoparticles.

  6. Synthesis and integration of Fe-soc-MOF cubes into colloidosomes via a single-step emulsion-based approach

    KAUST Repository

    Pang, Maolin

    2013-07-17

    Bottom-up fabrication of complex 3D hollow superstructures from nonspherical building blocks (BBs) poses a significant challenge for scientists in materials chemistry and physics. Spherical colloidal silica or polystyrene particles are therefore often integrated as BBs for the preparation of an emerging class of materials, namely colloidosomes (using colloidal particles for Pickering stabilization and fusing them to form a permeable shell). Herein, we describe for the first time a one-step emulsion-based technique that permits the assembly of metal-organic framework (MOF) faceted polyhedral BBs (i.e., cubes instead of spheres) into 3D hollow superstructures (or "colloidosomes" ). The shell of each resultant hollow MOF colloidosome is constructed from a monolayer of cubic BBs, whose dimensions can be precisely controlled by varying the amount of emulsifier used in the synthesis. © 2013 American Chemical Society.

  7. Multicolored Cd1-xZnxSe quantum dots with type-I core/shell structure: single-step synthesis and their use as light emitting diodes

    Science.gov (United States)

    Pu, Ying-Chih; Hsu, Yung-Jung

    2014-03-01

    We developed a single-step hot-injection process to synthesize Cd1-xZnxSe quantum dots (QDs) with tunable emission wavelengths. The multiple emission colors of the Cd1-xZnxSe QDs resulted from the variation in their compositions (x value) with the reaction time. Because of the higher reactivity of the Cd precursor, QDs whose composition was rich in CdSe were generated at the beginning of the reaction. As the reaction proceeded, the later-formed ZnSe shell was simultaneously alloyed with the core, giving rise to a progressive alloying treatment for the grown QDs. During the reaction period, the emission color of the Cd1-xZnxSe QDs shifted from red to orange, to yellow, to green and finally to blue. A light emitting diode (LED) composed of multilayers of ITO/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)/poly(3-hexylthiophene) blended with Cd1-xZnxSe QDs/Al was fabricated to test the electroluminescence (EL) properties of the QDs. The EL results show high color purity for the emission from LED devices containing Cd1-xZnxSe QDs, revealing that the as-synthesized QDs can be easily processed and integrated into a light-emitting device without using a complicated procedure. The findings from the present work also demonstrate the advantage of using the current single-step synthetic approach to obtain a batch of Cd1-xZnxSe QDs that may emit different colors in prototype LEDs.We developed a single-step hot-injection process to synthesize Cd1-xZnxSe quantum dots (QDs) with tunable emission wavelengths. The multiple emission colors of the Cd1-xZnxSe QDs resulted from the variation in their compositions (x value) with the reaction time. Because of the higher reactivity of the Cd precursor, QDs whose composition was rich in CdSe were generated at the beginning of the reaction. As the reaction proceeded, the later-formed ZnSe shell was simultaneously alloyed with the core, giving rise to a progressive alloying treatment for the grown QDs. During the reaction period

  8. A single-step synthesis and the kinetic mechanism for monodisperse and hexagonal-phase NaYF4:Yb, Er upconversion nanophosphors.

    Science.gov (United States)

    Shan, Jingning; Ju, Yiguang

    2009-07-08

    A single-step synthesis for monodisperse and hexagonal-phase (beta) NaYF(4):Yb, Er upconversion nanophosphors (UCNPs) with a consistent hexagonal prism shape in the size range from 18 to 200 nm was achieved. The kinetic mechanisms for the particle phase transition and growth were examined. The beta-UCNPs were obtained via co-thermolysis of trifluoroacetate precursors in octadecene (ODE) with combined ligands of oleic acid (OA) and trioctylphosphine (TOP). The experimental results showed that the combined OA-TOP ligand was crucial for changing the surface energy and controlling the particle shape over a broad size range. It was found that the particle sizes could be controlled by varying the molar ratios of Na(CF(3)COO)/Re(CF(3)COO)(3) (Re = Y, Yb, and Er). A high Na/Re ratio accelerated the cubic-phase (alpha)-->beta transition and promoted the growth of smaller beta-UCNPs. The formation of beta-UCNPs was classified into kinetic and diffusion controlled stages, depending on the reaction temperature and the dominant crystalline phases formed in each stage. In stage I, 250-310 degrees C, NaF generation was the limiting step and alpha-UCNPs were formed via a 'burst of nucleation'. In stage II, above 310 degrees C, the alpha-UCNPs formed were re-dissolved and the growth of beta-UCNPs was a diffusion controlled process governed by the Gibbs-Thompson effect. A quasi-steady-state species assumption for NaF and a chemical potential equilibrium in the solution were introduced to explain the particle size dependence on Na/Re ratios. The study of UC luminescence showed that the UC intensity was proportional to the sizes of the beta-UCNPs.

  9. Conversion of failed laparoscopic adjustable gastric banding to Roux-en-Y gastric bypass is safe as a single-step procedure

    NARCIS (Netherlands)

    Emous, M.; Apers, J.; Hoff, C.; van Beek, A. P.; Totte, E.

    Several different procedures have been proposed as a revisional procedure for treatment of failed laparoscopic adjustable gastric banding (LAGB). Laparoscopic Roux-en-Y gastric bypass (LRYGB) has been advocated as the procedure of choice for revision. In this study, we compare the single- and

  10. A single-step synthesis of nitrogen-doped graphene sheets decorated with cobalt hydroxide nanoflakes for the determination of dopamine

    Directory of Open Access Journals (Sweden)

    Muhammad Mehmood Shahid

    2017-10-01

    Full Text Available Nitrogen-doped reduced graphene oxide (NrGO sheets decorated with Co(OH2 nanoflakes were prepared by a single-step hydrothermal process. The morphological and structural characterizations of as synthesized NrGO@Co(OH2 nanoflakes were performed by field emission scanning electron microscopy (FESEM, EDX-mapping and X-ray diffraction (XRD. NrGO@Co(OH2 nanoflakes modified glassy carbon electrode (GCE was used for electrochemical sensing of dopamine in neutral medium. The nanocomposite modified electrode showed enhanced electrochemical sensing ability for the detection of dopamine and the limit of detection (LoD was found to be 0.201 μM with a sensitivity value of 0.0286 ± 0.002 mA mM−1. Interference studies revealed that NrGO@Co(OH2─GCE endow excellent selectivity for DA detection even in the presence of higher concentration of common co-existing physiological interfering analytes. Additionally, proposed sensor demonstrated excellent performance in urine samples with promising reproducibility and stability. Keywords: Nitrogen doped graphene, Dopamine, Electrochemical sensor, Amperometric detection

  11. Multicomponent Aqueous Synthesis of Iodo-1,2,3-triazoles: Single-Step Models for Dual Modification of Free Peptide and Radioactive Iodo Labeling.

    Science.gov (United States)

    Li, Lingjun; Ding, Shengqiang; Yang, Yanping; Zhu, Anlian; Fan, Xincui; Cui, Mengchao; Chen, Changpo; Zhang, Guisheng

    2017-01-23

    Iodo-1,2,3-triazoles are of considerable interest for chemical and biomedical applications. However, current synthetic methods for preparing iodo-1,2,3-triazoles cannot easily be applied to the direct modification of bioactive molecules in water. Through the combination of water-compatible oxidative iodination and the copper-catalyzed alkyne-azide cycloaddition reaction, a novel copper-catalyzed aqueous multicomponent synthetic method for the preparation of 5-iodo-1,2,3-triazoles has been developed. The method is highly effective and selective for substrates including biologically relevant compounds with nucleoside, sugar, and amino acid moieties. Based on this aqueous tandem reaction, a direct single-step multicomponent dual modification of peptide is developed from readily available starting materials. Furthermore, the method could also be applied to concise and fast multicomponent radioactive 125 I labeling from an aqueous solution of commercially available sodium 125 iodide as a starting material. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Single-step green synthesis and characterization of gold-conjugated polyphenol nanoparticles with antioxidant and biological activities

    Directory of Open Access Journals (Sweden)

    Sanna V

    2014-10-01

    Full Text Available Vanna Sanna,1,2 Nicolino Pala,1 Giuseppina Dessì,1 Paola Manconi,1 Alberto Mariani,1 Sonia Dedola,3 Mauro Rassu,3 Claudia Crosio,3 Ciro Iaccarino,3 Mario Sechi1,2 1Department of Chemistry and Pharmacy, University of Sassari, Sassari, Italy; 2Laboratory of Nanomedicine, Department of Chemistry and Pharmacy, University of Sassari, c/o Porto Conte Ricerche, Tramariglio, Alghero, Italy; 3Department of Biomedical Sciences, University of Sassari, Sassari, Italy Background: Gold nanoparticles (GNPs are likely to provide an attractive platform for combining a variety of biophysicochemical properties into a unified nanodevice with great therapeutic potential. In this study we investigated the capabilities of three different natural polyphenols, epigallocatechin-3-gallate (EGCG, resveratrol (RSV, and fisetin (FS, to allow synergistic chemical reduction of gold salts to GNPs and stabilization in a single-step green process. Moreover, antioxidant properties of the nanosystems, as well as preliminary antiproliferative activity and apoptotic process investigation of model EGCG-GNPs on stable clones of neuroblastoma SH-SY5Y cells expressing CFP-DEVD-YFP reporter, were examined. Methods: The GNPs were characterized by physicochemical techniques, polyphenol content, and in vitro stability. The antioxidant activity of the GNPs was also determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid cation (ABTS radical-scavenging assays. Stable clones of neuronal SH-SY5Y-CFP-DEVD-YFP were generated and characterized, and cell viability after treatment with EGCG-GNPs was assessed after 72 hours through a 3(4,5-dimethylthiazol-2yl-5-(3-carboxymethoxyphenyl-2-(4-sulfophenyl-2H-tetrazolium assay. Activation of the apoptotic pathways was also investigated by Western blot analysis. Results: With a diameter in the size range of 10–25 nm, the obtained nanoparticles (NPs were found to contain 2.71%, 3.23%, and 5.47% of EGCG

  13. Facile single-step ammonia heat-treatment and quenching process for the synthesis of improved Pt/N-graphene catalysts

    Science.gov (United States)

    Xiong, Bin; Zhou, Yingke; O'Hayre, Ryan; Shao, Zongping

    2013-02-01

    In this work, we present a facile route to prepare electrocatalysts for methanol oxidation. The catalyst synthesis route involves the simultaneous reduction and nitrogen doping of graphene oxide (GO) along with the reduction of H2PtCl6 to Pt by a facile ammonia gas heat-treatment and quenching process. The resulting catalysts are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy while their electrocatalytic activity toward the oxidation of methanol is evaluated by cyclic voltammetry. The obtained Pt/graphene composites consist of crystalline Pt nanoparticles in the range of 1-4 nm which are well-dispersed on the N-doped graphene sheets. The best Pt/N-graphene catalyst composite is obtained after a 5 min ammonia treatment at 800 °C followed by rapid ammonia gas quenching at room temperature. This catalyst demonstrates superior catalytic activity for methanol electro-oxidation, with a peak current density of 0.218 A mgPt-1, which is about five times higher than an undoped (hydrogen treated and quenched) Pt/graphene control catalyst. The excellent electrocatalytic performance of the ammonia quenched catalyst is attributed to the nitrogenous functional groups and dopants in the graphene sheets that are formed during the facile quenching process in ammonia.

  14. Multicolored Cd(1-x)Zn(x)Se quantum dots with type-I core/shell structure: single-step synthesis and their use as light emitting diodes.

    Science.gov (United States)

    Pu, Ying-Chih; Hsu, Yung-Jung

    2014-04-07

    We developed a single-step hot-injection process to synthesize Cd1-xZnxSe quantum dots (QDs) with tunable emission wavelengths. The multiple emission colors of the Cd1-xZnxSe QDs resulted from the variation in their compositions (x value) with the reaction time. Because of the higher reactivity of the Cd precursor, QDs whose composition was rich in CdSe were generated at the beginning of the reaction. As the reaction proceeded, the later-formed ZnSe shell was simultaneously alloyed with the core, giving rise to a progressive alloying treatment for the grown QDs. During the reaction period, the emission color of the Cd1-xZnxSe QDs shifted from red to orange, to yellow, to green and finally to blue. A light emitting diode (LED) composed of multilayers of ITO/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)/poly(3-hexylthiophene) blended with Cd1-xZnxSe QDs/Al was fabricated to test the electroluminescence (EL) properties of the QDs. The EL results show high color purity for the emission from LED devices containing Cd1-xZnxSe QDs, revealing that the as-synthesized QDs can be easily processed and integrated into a light-emitting device without using a complicated procedure. The findings from the present work also demonstrate the advantage of using the current single-step synthetic approach to obtain a batch of Cd1-xZnxSe QDs that may emit different colors in prototype LEDs.

  15. Single-step synthesis of a new series of meso di-Mannich bases from the cyclic aminal (2S,7R,11S,16R)-1,8,10,17-tetraazapentacyclo [8.8.1.1..sup.8,17./sup.0..sup.2,7./sup.0.sup.11,16./sup.]icosane and p-substituted phenols

    Czech Academy of Sciences Publication Activity Database

    Rivera, A.; Quiroga, D.; Ríos-Motta, J.; Eigner, V.; Dušek, Michal

    2013-01-01

    Roč. 7, JUN (2013), s. 100 ISSN 1752-153X Institutional support: RVO:68378271 Keywords : p-substituted phenols * Mannich bases * single-step synthesis * Jana2006 Subject RIV: CC - Organic Chemistry Impact factor: 1.663, year: 2013

  16. Preliminary results in single-step wound closure procedure of full-thickness facial burns in children by using the collagen-elastin matrix and review of pediatric facial burns.

    Science.gov (United States)

    Demircan, Mehmet; Cicek, Tugrul; Yetis, Muhammed Ikbal

    2015-09-01

    Management of full-thickness facial burns remains one of the greatest challenges. Controversy exists among surgeons regarding the use of early excision for facial burns. Unfortunately, delayed excision of deeper burns often results in more scarring and subsequent reconstruction becomes more difficult. A collagen-elastin matrix is used to improve the quality of the reconstructed skin, to reduce scarring and to prevent wound contraction. It serves as a foundation for split thickness skin graft and enhances short and long-term results. We report the usage of a collagen-elastin matrix during single-step wound closure technique of severe full-thickness facial burns in 15 children with large burned body surface area, and also we review the literature about pediatric facial burns. There were 15 pediatric patients with severe facial burns, 8 girls and 7 boys ranging in age from 10 months to 12 years, mean age 7 years and 6 months old. The facial burn surface area (FBSA) among the patients includes seven patients with 100%, five with 75%, and three with 50%. The average total body surface area (TBSA) for the patients was 72%, ranging between 50 and 90%. 5 of the patients' admissions were late, more than four days after burns while the rest of the patients were admitted within the first four days (acute admission time). The burns were caused by flame in eight of the patients, bomb blast in four, and scalding in three. All patients were treated by the simultaneous application of the collagen-elastin matrix and an unmeshed split thickness skin graft at Turgut Özal Medical Center, Pediatric Burn Center, Malatya, Turkey. After the treatment only two patients needed a second operation for revision of the grafts. All grafts transplanted to the face survived. The average Vancouver scar scales (VSS) were 2.55±1.42, ranging between one and six, in the first 10 of 15 patients at the end of 6 months postoperatively. VSS measurements of the last 5 patients were not taken since the 6

  17. Study on single step solid state synthesis of WC@C nanocomposite and electrochemical stability of synthesized WC@C & Pt/WC@C for alcohol oxidation (methanol/ethanol)

    Energy Technology Data Exchange (ETDEWEB)

    Singla, Gourav, E-mail: gsinghla@gmail.com; Singh, K., E-mail: kusingh@thapar.edu; Pandey, O.P., E-mail: oppandey@thapar.edu

    2016-04-25

    WC@C nano composite was prepared by a single step solid–state reaction through in situ reduction and carburization of WO{sub 3} in the presence of Mg and activated charcoal. The XRD results and thermodynamics analysis showed that the optimization of reaction temperature facilitates the reduction as well as carburization of tungsten oxide(s) at different reaction temperature. Thermogravimetric analysis of the product was done to assess the thermal stability in air. The Raman spectroscopy was used to find out the nature (amorphous/graphitic) of carbon in the obtained phase. The N{sub 2} adsorption–desorption measurement showed a narrow pore size distribution from 3 to 4 nm with BET surface area of up to 522.5 m{sup 2}/g. TEM/HRTEM images confirmed formation of the WC nano particles with spherical morphology. Electrochemical stability of pure and platinized carbide sample (Pt/WC) has been investigated using cyclic voltammetry in acidic media for alcohol (methanol and ethanol) oxidation. - Highlights: • Tungsten carbide nano powder was synthesized using charcoal as carbon source. • Formation of WC occurs through the formation of lower tungsten oxide. • CO{sub 2}/CO ratio effect the formation of WC. • Mesoporous tungsten carbide with surface areas 522.5 m{sup 2}/g obtained by using charcoal. • Pt modified WC powder showed higher electrochemical stability.

  18. In Situ Studies and Magnetic Properties of the Cmcm Polymorph of LiCoPO4 with a Hierarchical Dumbbell-Like Morphology Synthesized by Easy Single-Step Polyol Synthesis

    Directory of Open Access Journals (Sweden)

    Carlos Alarcón-Suesca

    2016-11-01

    Full Text Available LiCoPO4 (LCP exists in three different structural modifications: LCP-Pnma (olivine structure, LCP-Pn21a (KNiPO4 structure type, and LCP-Cmcm (Na2CrO4 structure type. The synthesis of the LCP-Cmcm polymorph has been reported via high pressure/temperature solid-state methods and by microwave-assisted solvothermal synthesis. Phase transitions from both LCP-Pn21a and LCP-Cmcm to LCP-Pnma upon heating indicates a metastable behavior. However, a precise study of the structural changes during the heating process and the magnetic properties of LCP-Cmcm are hitherto unknown. Herein, we present the synthesis and characterization of LCP-Cmcm via a rapid and facile soft-chemistry approach using two different kinetically controlled pathways, solvothermal and polyol syntheses, both of which only require relatively low temperatures (~200 °C. Additionally, by polyol, method a dumbbell-like morphology is obtained without the use of any additional surfactant or template. A temperature-dependent in situ powder XRD shows a transition from LCP-Cmcm at room temperature to LCP-Pnma and finally to LCP-Pn21a at 575 and 725 °C, respectively. In addition to that, the determination of the magnetic susceptibility as a function of temperature indicates a long-range antiferromagnetic order below TN = 11 K at 10 kOe and 9.1 K at 25 kOe. The magnetization curves suggests the presence of a metamagnetic transition.

  19. Single-Step Resection of an Intraosseous Meningioma and Cranial Reconstruction : Technical Note

    NARCIS (Netherlands)

    Broeckx, Charlotte-Elise; Maal, Thomas J. J.; Vreeken, Rinaldo D.; Bos, Ruud R. M.; ter Laan, Mark

    2017-01-01

    OBJECTIVE: Simultaneous tumor resection and cranial reconstruction can be a challenging task. Surgical navigation is an indispensable tool in making this single-step procedure possible. In this technical note, we describe a new technique for this procedure to ensure a precise resection and optimal

  20. Single-step colony assay for screening antibody libraries.

    Science.gov (United States)

    Kato, Mieko; Hanyu, Yoshiro

    2017-08-10

    We describe a method, single-step colony assay, for simple and rapid screening of single-chain Fv fragment (scFv) libraries. Colonies of Escherichia coli expressing the scFv library are formed on a hydrophilic filter that is positioned in contact with a membrane coated with an antigen. scFv expression is triggered upon treatment of colonies with an induction reagent, following which scFvs are secreted from the cells and diffused to the antigen-coated membrane. scFvs that exhibit binding affinity for the antigen are captured by the membrane-immobilized antigen. Lastly, detection of scFv binding of the antigen on the membrane allows identification of the clones on the filter that express antigen-specific scFvs. We tested this methodology by using an anti-rabbit IgG scFv, scFv(A10B), and a rat immune scFv library. Experiments conducted using scFv(A10B) revealed that this method improves scFv expression during the colony assay. By using our method to screen an immune library of 3×10 3 scFv clones, we established several clones exhibiting affinity for the antigen. Moreover, we tested 7 other antigens, including peptides, and successfully identified positive clones. We believe that this simple procedure and controlled scFv expression of the single-step colony assay could make the antibody screening both rapid and reliable and lead to successful isolation of positive clones from antibody libraries. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Single-centre comparison of a novel single-step balloon inflation ...

    African Journals Online (AJOL)

    Subject. Single-centre comparison of a novel single-step balloon inflation device and Amplatz sheath dilatation during percutaneous nephrolithotomy – a pilot study. Outcome measures. Single procedure success rates, retreatment rates, hospital stay, haemoglobin concentration, calculi volume, calculi configuration, patient ...

  2. Polypyrrole/silver composites prepared by single-step synthesis

    Czech Academy of Sciences Publication Activity Database

    Omastová, M.; Mosnáčková, K.; Fedorko, P.; Trchová, Miroslava; Stejskal, Jaroslav

    2013-01-01

    Roč. 166, 15 February (2013), s. 57-62 ISSN 0379-6779 R&D Projects: GA TA ČR TE01020022; GA ČR GAP205/12/0911 Institutional support: RVO:61389013 Keywords : conducting polymer * hybrid composite * oxidation Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.222, year: 2013

  3. Single-step digital backpropagation for nonlinearity mitigation

    DEFF Research Database (Denmark)

    Secondini, Marco; Rommel, Simon; Meloni, Gianluca

    2015-01-01

    Nonlinearity mitigation based on the enhanced split-step Fourier method (ESSFM) for the implementation of low-complexity digital backpropagation (DBP) is investigated and experimentally demonstrated. After reviewing the main computational aspects of DBP and of the conventional split-step Fourier...... is experimentally demonstrated by using a single-step DBP based on the ESSFM. The proposed DBP implementation requires only a single step of the ESSFM algorithm to achieve a transmission distance of 3200 km over a dispersion-unmanaged link. In comparison, a conventional DBP implementation requires 20 steps...

  4. A single-step method for rapid extraction of total lipids from green microalgae.

    Directory of Open Access Journals (Sweden)

    Martin Axelsson

    Full Text Available Microalgae produce a wide range of lipid compounds of potential commercial interest. Total lipid extraction performed by conventional extraction methods, relying on the chloroform-methanol solvent system are too laborious and time consuming for screening large numbers of samples. In this study, three previous extraction methods devised by Folch et al. (1957, Bligh and Dyer (1959 and Selstam and Öquist (1985 were compared and a faster single-step procedure was developed for extraction of total lipids from green microalgae. In the single-step procedure, 8 ml of a 2∶1 chloroform-methanol (v/v mixture was added to fresh or frozen microalgal paste or pulverized dry algal biomass contained in a glass centrifuge tube. The biomass was manually suspended by vigorously shaking the tube for a few seconds and 2 ml of a 0.73% NaCl water solution was added. Phase separation was facilitated by 2 min of centrifugation at 350 g and the lower phase was recovered for analysis. An uncharacterized microalgal polyculture and the green microalgae Scenedesmus dimorphus, Selenastrum minutum, and Chlorella protothecoides were subjected to the different extraction methods and various techniques of biomass homogenization. The less labour intensive single-step procedure presented here allowed simultaneous recovery of total lipid extracts from multiple samples of green microalgae with quantitative yields and fatty acid profiles comparable to those of the previous methods. While the single-step procedure is highly correlated in lipid extractability (r² = 0.985 to the previous method of Folch et al. (1957, it allowed at least five times higher sample throughput.

  5. Process simulation of single-step dimethyl ether production via biomass gasification.

    Science.gov (United States)

    Ju, Fudong; Chen, Hanping; Ding, Xuejun; Yang, Haiping; Wang, Xianhua; Zhang, Shihong; Dai, Zhenghua

    2009-01-01

    In this study, we simulated the single-step process of dimethyl ether (DME) synthesis via biomass gasification using ASPEN Plus. The whole process comprised four parts: gasification, water gas shift reaction, gas purification, and single-step DME synthesis. We analyzed the influence of the oxygen/biomass and steam/biomass ratios on biomass gasification and synthesis performance. The syngas H(2)/CO ratio after water gas shift process was modulated to 1, and the syngas was then purified to remove H(2)S and CO(2), using the Rectisol process. Syngas still contained trace amounts of H(2)S and about 3% CO(2) after purification, which satisfied the synthesis demands. However, the high level of cold energy consumption was a problem during the purification process. The DME yield in this study was 0.37, assuming that the DME selectivity was 0.91 and that CO was totally converted. We performed environmental and economic analyses, and propose the development of a poly-generation process based on economic considerations.

  6. An Efficient Microscale Procedure for the Synthesis of Aspirin

    Science.gov (United States)

    Pandita, Sangeeta; Goyal, Samta

    1998-06-01

    The synthesis of aspirin is a part of many undergraduate organic synthesis labs and is frequently used in qualitative organic analysis laboratory for the identification of salicylic acid. We have found that aspirin can be synthesized on microscale by a simple and efficient procedure that eliminates the heating step employed in literature procedures and gives a pure, ferric-negative product (no purple color with alcoholic ferric chloride solution).

  7. Pelvifemoral kinematics while ascending single steps of different heights.

    Science.gov (United States)

    Bohannon, Richard W; Smutnick, Jason

    2010-08-01

    Motion of the femur and pelvis during hip flexion has been examined previously, but principally in the sagittal plane and during nonfunctional activities. In this study we examined femoral elevation in the sagittal plane and pelvic rotation in the sagittal and frontal planes while subjects flexed their hips to ascend single steps. Fourteen subjects ascended single steps of 4 different heights leading with each lower limb. Motion of the lead femur and pelvis during the flexion phase of step ascent was tracked using an infrared motion capture system. Depending on step height and lead limb, step ascent involved elevation of the femur (mean 47.2 degrees to 89.6 degrees) and rotation of the pelvis in both the sagittal plane (tilting: mean 2.6 degrees to 9.7 degrees) and frontal plane (listing: mean 4.2 degrees to 11.9 degrees). Along with maximum femoral elevation, maximum pelvic rotation increased significantly (pelevation and pelvic rotation during the flexion phase of step ascent were synergistic (r=.852-.999). Practitioners should consider pelvic rotation in addition to femoral motion when observing individuals' ascent of steps.

  8. Algal-based, single-step treatment of urban wastewaters.

    Science.gov (United States)

    Henkanatte-Gedera, S M; Selvaratnam, T; Caskan, N; Nirmalakhandan, N; Van Voorhies, W; Lammers, Peter J

    2015-08-01

    Currently, urban wastewaters (UWW) laden with organic carbon (BOD) and nutrients (ammoniacal nitrogen, N, and phosphates, P) are treated in multi-stage, energy-intensive process trains to meet the mandated discharge standards. This study presents a single-step process based on mixotrophic metabolism for simultaneous removal of carbon and nutrients from UWWs. The proposed system is designed specifically for hot, arid environments utilizing an acidophilic, thermotolerant algal species, Galdieria sulphuraria, and an enclosed photobioreactor to limit evaporation. Removal rates of BOD, N, and P recorded in this study (14.93, 7.23, and 1.38 mg L(-1) d(-1), respectively) are comparable to literature reports. These results confirm that the mixotrophic system can reduce the energy costs associated with oxygen supply in current UWW treatment systems, and has the potential to generate more energy-rich biomass for net energy extraction from UWW. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Bridge flap technique as a single-step solution to mucogingival problems: A case series

    Directory of Open Access Journals (Sweden)

    Vivek Gupta

    2011-01-01

    Full Text Available Shallow vestibule, gingival recession, inadequate width of attached gingiva (AG and aberrant frenum pull are an array of mucogingival problems for which several independent and effective surgical solutions are reported in the literature. This case series reports the effectiveness of the bridge flap technique as a single-step surgical entity for increasing the depth of the vestibule, root coverage, increasing the width of the AG and solving the problem of abnormal frenum pull. Eight patients with 18 teeth altogether having Millers class I, II or III recession along with problems of shallow vestibule, inadequate width of AG and with or without frenum pull underwent this surgical procedure and were followed-up till 9 months post-operatively. The mean root coverage obtained was 55% and the mean average gain in width of the AG was 3.5 mm. The mean percentage gain in clinical attachment level was 41%. The bridge flap technique can be an effective single-step solution for the aforementioned mucogingival problems if present simultaneously in any case, and offers considerable advantages over other mucogingival surgical techniques in terms of simplicity, limited chair-time for the patient and the operator, single surgical intervention for manifold mucogingival problems and low morbidity because of the absence of palatal donor tissue.

  10. Virtual substitution scan via single-step free energy perturbation.

    Science.gov (United States)

    Chiang, Ying-Chih; Wang, Yi

    2016-02-05

    With the rapid expansion of our computing power, molecular dynamics (MD) simulations ranging from hundreds of nanoseconds to microseconds or even milliseconds have become increasingly common. The majority of these long trajectories are obtained from plain (vanilla) MD simulations, where no enhanced sampling or free energy calculation method is employed. To promote the 'recycling' of these trajectories, we developed the Virtual Substitution Scan (VSS) toolkit as a plugin of the open-source visualization and analysis software VMD. Based on the single-step free energy perturbation (sFEP) method, VSS enables the user to post-process a vanilla MD trajectory for a fast free energy scan of substituting aryl hydrogens by small functional groups. Dihedrals of the functional groups are sampled explicitly in VSS, which improves the performance of the calculation and is found particularly important for certain groups. As a proof-of-concept demonstration, we employ VSS to compute the solvation free energy change upon substituting the hydrogen of a benzene molecule by 12 small functional groups frequently considered in lead optimization. Additionally, VSS is used to compute the relative binding free energy of four selected ligands of the T4 lysozyme. Overall, the computational cost of VSS is only a fraction of the corresponding multi-step FEP (mFEP) calculation, while its results agree reasonably well with those of mFEP, indicating that VSS offers a promising tool for rapid free energy scan of small functional group substitutions. This article is protected by copyright. All rights reserved. © 2016 Wiley Periodicals, Inc.

  11. Single-Step Ironmaking from Ore to Improve Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    S.K. Kawatra; B. Anamerie; T.C. Eisele

    2005-10-01

    The pig iron nugget process was developed as an alternative to the traditional blast furnace process by Kobe Steel. The process aimed to produce pig iron nuggets, which have similar chemical and physical properties to blast furnace pig iron, in a single step. The pig iron nugget process utilizes coal instead of coke and self reducing and fluxing dried green balls instead of pellets and sinters. In this process the environmental emissions caused by coke and sinter production, and energy lost between pellet induration (heat hardening) and transportation to the blast furnace can be eliminated. The objectives of this research were to (1) produce pig iron nuggets in the laboratory, (2) characterize the pig iron nugget produced and compare them with blast furnace pig iron, (3) investigate the furnace temperature and residence time effects on the pig iron nugget production, and (4) optimize the operational furnace temperatures and residence times. The experiments involved heat treatment of self reducing and fluxing dried green balls at various furnace temperatures and residence times. Three chemically and physically different products were produced after the compete reduction of iron oxides to iron depending on the operational furnace temperatures and/or residence times. These products were direct reduced iron (DRI), transition direct reduced iron (TDRI), and pig iron nuggets. The increase in the carbon content of the system as a function of furnace temperature and/or residence time dictated the formation of these products. The direct reduced iron, transition direct reduced iron, and pig iron nuggets produced were analyzed for their chemical composition, degree of metallization, apparent density, microstructure and microhardness. In addition, the change in the carbon content of the system with the changing furnace temperature and/or residence time was detected by optical microscopy and Microhardness measurements. The sufficient carbon dissolution required for the

  12. Separation and purification of nanoparticles in a single step.

    Science.gov (United States)

    Hollamby, Martin J; Eastoe, Julian; Chemelli, Angela; Glatter, Otto; Rogers, Sarah; Heenan, Richard K; Grillo, Isabelle

    2010-05-18

    Reversed-micelle synthesis has been used to generate CTAB-stabilized gold (Au-NPs) and silver nanoparticles (Ag-NPs). By inducing a phase transition and subsequent separation of the background supporting microemulsion, it has been possible to extract and purify the NPs from the reaction medium. After addition of excess water, the NPs concentrate into an upper octane-rich phase, with impurities and reaction debris (in particular CTAB) partitioning into the water-rich lower phase. UV and (1)H NMR showed that 82% of the original mass of Au-NPs can be purified from the excess CTAB and other salt impurities. The concentrated and purified NPs can be dried down, by solvent removal, and then redispersed in octane. Using the complementary techniques small-angle neutron and X-ray scattering (SANS and SAXS), the structures of microemulsions both with and without nanoparticles prior to separation, and in both upper and lower phases after separation, have been elucidated. The approach has also been applied to the synthesis and recovery of silver nanoparticles, but on a larger scale. This new approach compares favorably with existing methods as it uses no additional organic solvents, has a low-energy demand, and requires no specialist surfactants. The new advance here is that by using a colloidal system to prepare and support the nanoparticles as a structured solvent, a simple soft purification method becomes accessible, which is otherwise impossible with a normal molecular solvent.

  13. Single-step preparation of TiO2/MWCNT Nanohybrid materials by laser pyrolysis and application to efficient photovoltaic energy conversion.

    Science.gov (United States)

    Wang, Jin; Lin, Yaochen; Pinault, Mathieu; Filoramo, Arianna; Fabert, Marc; Ratier, Bernard; Bouclé, Johann; Herlin-Boime, Nathalie

    2015-01-14

    This paper presents the continuous-flowand single-step synthesis of a TiO2/MWCNT (multiwall carbon nanotubes) nanohybrid material. The synthesis method allows achieving high coverage and intimate interface between the TiO2particles and MWCNTs, together with a highly homogeneous distribution of nanotubes within the oxide. Such materials used as active layer in theporous photoelectrode of solid-state dye-sensitized solar cells leads to a substantial performance improvement (20%) as compared to reference devices.

  14. Single-step generation of fluorophore-encapsulated gold nanoparticle core-shell materials

    International Nuclear Information System (INIS)

    Sardar, R; Shem, P M; Pecchia-Bekkum, C; Bjorge, N S; Shumaker-Parry, J S

    2010-01-01

    We report a simple route to produce fluorophore-encapsulated gold nanoparticles (AuNPs) in a single step under aqueous conditions using the fluorophore 1-pyrenemethylamine (PMA). Different amounts of PMA were used and the resulting core-shell gold nanoparticles were analyzed using UV-visible absorption spectroscopy, fluorescence spectroscopy, and transmission and scanning electron microscopy. Electron microscopy analysis shows nanoparticles consisting of a gold nanoparticle core which is encapsulated with a lower contrast shell. In the UV-visible spectra, we observed a significant red shift (37 nm) of the localized surface plasmon resonance (LSPR) absorption maximum (λ max ) compared to citrate-stabilized AuNPs of a similar size. We attribute the prominent LSPR wavelength shift for PMA-AuNP conjugates to the increase in the local dielectric environment near the gold nanoparticles due to the shell formation. This simple, aqueous-based synthesis is a new approach to the production of fluorophore-encapsulated AuNPs that could be applicable in biological sensing systems and photonic device fabrication.

  15. Mercury speciation by high-performance liquid chromatography atomic fluorescence spectrometry using an integrated microwave/UV interface. Optimization of a single step procedure for the simultaneous photo-oxidation of mercury species and photo-generation of Hg{sup 0}

    Energy Technology Data Exchange (ETDEWEB)

    Quadros, Daiane P.C. de [Departamento de Química, Universidade Federal de Santa Catarina, 88040-970 Florianópolis, SC (Brazil); Campanella, Beatrice; Onor, Massimo; Bramanti, Emilia [National Research Council of Italy, C.N.R., Instituto di Chimica dei Composti Organo Metallici – ICCOM – UOS Pisa, Area della Ricerca, Via G. Moruzzi 1, 56124 Pisa (Italy); Borges, Daniel L.G. [Departamento de Química, Universidade Federal de Santa Catarina, 88040-970 Florianópolis, SC (Brazil); D' Ulivo, Alessandro, E-mail: dulivo@pi.iccom.cnr.it [National Research Council of Italy, C.N.R., Instituto di Chimica dei Composti Organo Metallici – ICCOM – UOS Pisa, Area della Ricerca, Via G. Moruzzi 1, 56124 Pisa (Italy)

    2014-11-01

    We described the hyphenation of photo-induced chemical vapor generation with high performance liquid chromatography–atomic fluorescence spectrometry (HPLC–AFS) for the quantification of inorganic mercury, methylmercury (MeHg) and ethylmercury (EtHg). In the developed procedure, formic acid in mobile phase was used for the photodecomposition of organomercury compounds and reduction of Hg{sup 2+} to mercury vapor under microwave/ultraviolet (MW/UV) irradiation. We optimized the proposed method studying the influence of several operating parameters, including the type of organic acid and its concentration, MW power, composition of HPLC mobile phase and catalytic action of TiO{sub 2} nanoparticles. Under the optimized conditions, the limits of detection were 0.15, 0.15 and 0.35 μg L{sup −1} for inorganic mercury, MeHg and EtHg, respectively. The developed method was validated by determination of the main analytical figures of merit and applied to the analysis of three certified reference materials. The online interfacing of liquid chromatography with photochemical-vapor generation–atomic fluorescence for mercury determination is simple, environmentally friendly, and represents an attractive alternative to the conventional tetrahydroborate (THB) system. - Highlights: • Inorganic and organic mercury were determined by photochemical vapor generation using a MW/UV photochemical reactor. • The optimized procedure has been applied to the speciation of Hg(II), MeHg and EtHg coupling HPLC with PVG–AFS. • The proposed method is simple, sensitive, and is established for mercury determination in biological materials.

  16. Method and apparatus for single-stepping coherence events in a multiprocessor system under software control

    Science.gov (United States)

    Blumrich, Matthias A.; Salapura, Valentina

    2010-11-02

    An apparatus and method are disclosed for single-stepping coherence events in a multiprocessor system under software control in order to monitor the behavior of a memory coherence mechanism. Single-stepping coherence events in a multiprocessor system is made possible by adding one or more step registers. By accessing these step registers, one or more coherence requests are processed by the multiprocessor system. The step registers determine if the snoop unit will operate by proceeding in a normal execution mode, or operate in a single-step mode.

  17. Improving Genetic Evaluation of Litter Size Using a Single-step Model

    DEFF Research Database (Denmark)

    Guo, Xiangyu; Christensen, Ole Fredslund; Ostersen, Tage

    A recently developed single-step method allows genetic evaluation based on information from phenotypes, pedigree and markers simultaneously. This paper compared reliabilities of predicted breeding values obtained from single-step method and the traditional pedigree-based method for two litter size...... traits, total number of piglets born (TNB), and litter size at five days after birth (Ls 5) in Danish Landrace and Yorkshire pigs. The results showed that the single-step method combining phenotypic and genotypic information provided more accurate predictions than the pedigree-based method, not only...

  18. Versatile three-component procedure for combinatorial synthesis of ...

    Indian Academy of Sciences (India)

    10. In recent years, several methods for the synthesis of spiro-oxindoles with fused 4H-chromenes via multi- component condensation reactions have been reported. The conventional synthesis involves a three-component condensation of ...

  19. Compatibility of pedigree-based and marker-based relationships for single-step genomic prediction

    DEFF Research Database (Denmark)

    Christensen, Ole Fredslund

    2012-01-01

    Single-step methods for genomic prediction have recently become popular because they are conceptually simple and in practice such a method can completely replace a pedigree-based method for routine genetic evaluation. An issue with single-step methods is compatibility between the marker-based rel......Single-step methods for genomic prediction have recently become popular because they are conceptually simple and in practice such a method can completely replace a pedigree-based method for routine genetic evaluation. An issue with single-step methods is compatibility between the marker...... that it may be important that a single-step method is based on a model conditional on the observed markers. When data are from routine evaluation systems, selection affects the allele frequencies, and therefore both observed markers and observed phenotypes contain information about allele frequencies...... alpha/2. The parameter alpha should be determined from the markers, but since there is selection in routine evaluation systems the phenotypes in principle also provide information about this parameter. The likelihood function used for inference contains two terms. The first term is the REML...

  20. Single-step blood direct PCR: A robust and rapid method to diagnose triplet repeat disorders.

    Science.gov (United States)

    Singh, Inder; Swarup, Vishnu; Shakya, Sunil; Goyal, Vinay; Faruq, Mohammed; Srivastava, Achal Kumar

    2017-08-15

    DNA extraction prior to polymerase chain reaction (PCR) amplification in genetic diagnoses of triplet repeat disorders (TRDs) is tedious and labour-intensive and has the limitations of sample contamination with foreign DNA, including that from preceding samples. Therefore, we aimed to develop a rapid, robust, and cost-effective method for expeditious genetic investigation of TRDs from whole blood as a DNA template. Peripheral blood samples were collected from 70 clinically suspected patients of progressive ataxia. The conventional method using genomic DNA and single-step Blood-Direct PCR (BD-PCR) method with just 2μl of whole blood sample were tested to amplify triplet repeat expansion in genes related to spinocerebellar ataxia (SCA) types 1, 2, 3, 12 and Friedreich's ataxia (FRDA). Post-PCR, the allele sizes were mapped and repeat numbers were calculated using GeneMapper and macros run in Microsoft Excel programmes. Successful amplification of target regions was achieved in all samples by both methods. The frequency of the normal and mutated allele was concordant between both methods, diagnosing 37% positive for a mutation in either of the candidate genes. The BD-PCR resulted in higher intensities of product peaks of normal and pathogenic alleles. The nearly-accurate sizing of the normal and expanded allele was achieved in a shorter time (4-5h), without DNA extraction and any risk of cross contamination, which suggests the BD-PCR to be a reliable, inexpensive, and rapid method to confirm TRDs. This technique can be introduced in routine diagnostic procedures of other tandem repeat disorders. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Comparison of Model Reliabilities from Single-Step and Bivariate Blending Methods

    DEFF Research Database (Denmark)

    Taskinen, Matti; Mäntysaari, Esa; Lidauer, Martin

    2013-01-01

    the production trait evaluation of Nordic Red dairy cattle. Genotyped bulls with daughters are used as training animals, and genotyped bulls and producing cows as candidate animals. For simplicity, size of the data is chosen so that the full inverses of the mixed model equation coefficient matrices can......Model based reliabilities in genetic evaluation are compared between three methods: animal model BLUP, single-step BLUP, and bivariate blending after genomic BLUP. The original bivariate blending is revised in this work to better account animal models. The study data is extracted from...... be calculated. Model reliabilities by the single-step and the bivariate blending methods were higher than by animal model due to genomic information. Compared to the single-step method, the bivariate blending method reliability estimates were, in general, lower. Computationally bivariate blending method was...

  2. Issues involved in a knowledge-based approach to procedure synthesis

    International Nuclear Information System (INIS)

    Hajek, B.K.; Khartabil, L.F.; Miller, D.W.

    1992-01-01

    Many knowledge-based systems (KBSs) have been built to assist human operators in managing nuclear power plant operating functions, such as monitoring, fault diagnosis, alarm filtering, and procedure management. For procedure management, KBSs have been built to display and track existing written procedures or to dynamically follow procedure execution by monitoring plant data and action execution and suggesting recovery steps. More recent works build KBSs able to synthesize procedures. This paper addresses and examines the main issues related to the implementation of on-line procedure synthesis using KBSs. A KBS for procedure synthesis can provide a more robust and effective procedural plan during accidents. Currently existing procedures for abnormal plant conditions, written as precompiled step sets based on the event and symptom approaches, are inherently not robust because anticipation of all potential plant states and associated plant responses is not possible. Thus, their failure recovery capability is limited to the precompiled set. Procedure synthesis has the potential to overcome these two problems because it does not require such precompilation of large sets of plant states and associated recovery procedures. Other benefits obtained from a complete procedure synthesis system are providing (a) a methodology for off-line procedure verification and (b) a methodology for the eventual automation of plant operations

  3. A data comparison between a traditional and the single-step β-galactosidase assay

    Directory of Open Access Journals (Sweden)

    Jorrit Schaefer

    2016-09-01

    Full Text Available This article describes reproducibility of a single-step automated β-galactosidase, and the equivalence of its data to the traditional assay (“Experiments in Molecular Genetics” [1]. This was done via a pairwise comparison of both methods using strains with Miller Unit [MU] values ranging from 0 to over 2000. The data presented in this article is associated with the research article entitled “A single-step method for mid to high throughput β-galactosidase assays in Escherichia coli using a microplate reader” [2].

  4. A new procedure for synthesis of -aminophosphonates by aqueous ...

    Indian Academy of Sciences (India)

    ESMAEIL MOHAMMADIYAN

    2017-11-20

    Nov 20, 2017 ... bCatalysis and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science ... Abstract. Aqueous formic acid (37%) as a green organocatalyst was used to synthesis of α-aminophosphonates in one-pot ...... J, Keppler B K and Reedijk J 1999 Calcium Ions Do. Accelerate the ...

  5. Accuracy of Single-Step versus 2-Step Double-Mix Impression Technique

    DEFF Research Database (Denmark)

    Franco, Eduardo Batista; da Cunha, Leonardo Fernandes; Herrera, Francyle Simões

    2011-01-01

    Objective. To investigate the accuracy of dies obtained from single-step and 2-step double-mix impressions. Material and Methods. Impressions (n = 10) of a stainless steel die simulating a complete crown preparation were performed using a polyether (Impregum Soft Heavy and Light body) and a vinyl...

  6. Evaluation of Single-Step Steam Pyrolysis-Activated Carbons from ...

    African Journals Online (AJOL)

    Activated carbon has been widely used worldwide as an effective filtration or adsorption material for removing biological and chemical contaminants from drinking water. The potential of producing activated carbon (AC) from local agroforestry residues by single-step steam pyrolysis processes was investigated. The research ...

  7. Single step hydrothermal based synthesis of M (II) Sb2O6 (M= Cd ...

    Indian Academy of Sciences (India)

    The oxide powders obtained possessed lower crystallite size as compared to their solid-state synthesized counterparts. This was evident from the broadening of the powder X-ray diffraction peaks. The antimonates were photocatalytically active for the decomposition of methylene blue (MB) dye under UV light irradiation.

  8. Single-step brazing process for mono-block joints and mechanical testing

    International Nuclear Information System (INIS)

    Casalegno, V.; Ferraris, M.; Salvo, M.; Rizzo, S.; Merola, M.

    2007-01-01

    Full text of publication follows: Plasma facing components act as actively cooled thermal shields to sustain thermal and particle loads during normal and transient operations in ITER (International Thermonuclear Experimental Reactor). The plasma-facing layer is referred to as 'armour', which is made of either carbon fibre reinforced carbon composite (CFC) or tungsten (W). CFC is the reference design solution for the lower part of the vertical target of the ITER divertor. The armour is joined onto an actively cooled substrate, the heat sink, made of precipitation hardened copper alloy CuCrZr through a thin pure copper interlayer to decrease, by plastic deformation, the joint interface stresses; in fact, the CFC to Cu joint is affected by the CTE mismatch between the ceramic and metallic material. A new method of joining CFC to copper and CFC/Cu to CuCrZr alloy was effectively developed for the flat-type configuration; the feasibility of this process also for mono-block geometry and the development of a procedure for testing mono-block-type mock-ups is described in this work. The mono-block configuration consists of copper alloy pipe shielded by CFC blocks. It is worth noting that in mono-block configuration, the large thermal expansion mismatch between CFC and copper alloy is more significant than for flat-tile configuration, due to curved interfaces. The joining technique foresees a single-step brazing process: the brazing of the three materials (CFC-Cu-CuCrZr) can be performed in a single heat treatment using the same Cu/Ge based braze. The composite surface was modified by solid state reaction with chromium with the purpose of increasing the wettability of CFC by the brazing alloy. The CFC substrate reacts with Cr which, forming a carbide layer, allows a large reduction of the contact angle; then, the brazing of CFC to pure copper and pure copper to CuCrZr by the same treatment is feasible. This process allows to obtain good joints using a non-active brazing

  9. Single-Step Fabrication of High-Density Microdroplet Arrays of Low-Surface-Tension Liquids.

    Science.gov (United States)

    Feng, Wenqian; Li, Linxian; Du, Xin; Welle, Alexander; Levkin, Pavel A

    2016-04-01

    A facile approach for surface patterning that enables single-step fabrication of high-density arrays of low-surface-tension organic-liquid microdroplets is described. This approach enables miniaturized and parallel high-throughput screenings in organic solvents, formation of homogeneous arrays of hydrophobic nanoparticles, polymer micropads of specific shapes, and polymer microlens arrays. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Optimization of single-step tapering amplitude and energy detuning for high-gain FELs

    Science.gov (United States)

    Li, He-Ting; Jia, Qi-Ka

    2015-01-01

    We put forward a method to optimize the single-step tapering amplitude of undulator strength and initial energy tuning of electron beam to maximize the saturation power of high gain free-electron lasers (FELs), based on the physics of longitudinal electron beam phase space. Using the FEL simulation code GENESIS, we numerically demonstrate the accuracy of the estimations for parameters corresponding to the linac coherent light source and the Tesla test facility.

  11. An improved single-step lysis protocol to measure luciferase bioluminescence in Plasmodium falciparum

    Directory of Open Access Journals (Sweden)

    Hasenkamp Sandra

    2012-02-01

    Full Text Available Abstract This report describes the optimization and evaluation of a simple single-step lysis protocol to measure luciferase bioluminescence from genetically modified Plasmodium falciparum. This protocol utilizes a modified commercial buffer to improve speed of assay and consistency in the bioluminescence signal measured by reducing the manipulation steps required to release the cytoplasmic fraction. The utility of this improved assay protocol is demonstrated in typical assays that explore absolute and temporal gene expression activity.

  12. Single-step isolation of extracellular vesicles by size-exclusion chromatography

    OpenAIRE

    Böing, Anita N.; van der Pol, Edwin; Grootemaat, Anita E.; Coumans, Frank A. W.; Sturk, Auguste; Nieuwland, Rienk

    2014-01-01

    Background: Isolation of extracellular vesicles from plasma is a challenge due to the presence of proteins and lipoproteins. Isolation of vesicles using differential centrifugation or density-gradient ultracentrifugation results in co-isolation of contaminants such as protein aggregates and incomplete separation of vesicles from lipoproteins, respectively.Aim: To develop a single-step protocol to isolate vesicles from human body fluids.Methods: Platelet-free supernatant, derived from platelet...

  13. Composition of single-step media used for human embryo culture.

    Science.gov (United States)

    Morbeck, Dean E; Baumann, Nikola A; Oglesbee, Devin

    2017-04-01

    To determine compositions of commercial single-step culture media and test with a murine model whether differences in composition are biologically relevant. Experimental laboratory study. University-based laboratory. Inbred female mice were superovulated and mated with outbred male mice. Amino acid, organic acid, and ions content were determined for single-step culture media: CSC, Global, G-TL, and 1-Step. To determine whether differences in composition of these media are biologically relevant, mouse one-cell embryos were cultured for 96 hours in each culture media at 5% and 20% oxygen in a time-lapse incubator. Compositions of four culture media were analyzed for concentrations of 30 amino acids, organic acids, and ions. Blastocysts at 96 hours of culture and cell cycle timings were calculated, and experiments were repeated in triplicate. Of the more than 30 analytes, concentrations of glucose, lactate, pyruvate, amino acids, phosphate, calcium, and magnesium varied in concentrations. Mouse embryos were differentially affected by oxygen in G-TL and 1-Step. Four single-step culture media have compositions that vary notably in pyruvate, lactate, and amino acids. Blastocyst development was affected by culture media and its interaction with oxygen concentration. Copyright © 2017 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  14. Computing single step operators of logic programming in radial basis function neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Hamadneh, Nawaf; Sathasivam, Saratha; Choon, Ong Hong [School of Mathematical Sciences, Universiti Sains Malaysia, 11800 USM, Penang (Malaysia)

    2014-07-10

    Logic programming is the process that leads from an original formulation of a computing problem to executable programs. A normal logic program consists of a finite set of clauses. A valuation I of logic programming is a mapping from ground atoms to false or true. The single step operator of any logic programming is defined as a function (T{sub p}:I→I). Logic programming is well-suited to building the artificial intelligence systems. In this study, we established a new technique to compute the single step operators of logic programming in the radial basis function neural networks. To do that, we proposed a new technique to generate the training data sets of single step operators. The training data sets are used to build the neural networks. We used the recurrent radial basis function neural networks to get to the steady state (the fixed point of the operators). To improve the performance of the neural networks, we used the particle swarm optimization algorithm to train the networks.

  15. Computing single step operators of logic programming in radial basis function neural networks

    Science.gov (United States)

    Hamadneh, Nawaf; Sathasivam, Saratha; Choon, Ong Hong

    2014-07-01

    Logic programming is the process that leads from an original formulation of a computing problem to executable programs. A normal logic program consists of a finite set of clauses. A valuation I of logic programming is a mapping from ground atoms to false or true. The single step operator of any logic programming is defined as a function (Tp:I→I). Logic programming is well-suited to building the artificial intelligence systems. In this study, we established a new technique to compute the single step operators of logic programming in the radial basis function neural networks. To do that, we proposed a new technique to generate the training data sets of single step operators. The training data sets are used to build the neural networks. We used the recurrent radial basis function neural networks to get to the steady state (the fixed point of the operators). To improve the performance of the neural networks, we used the particle swarm optimization algorithm to train the networks.

  16. Computing single step operators of logic programming in radial basis function neural networks

    International Nuclear Information System (INIS)

    Hamadneh, Nawaf; Sathasivam, Saratha; Choon, Ong Hong

    2014-01-01

    Logic programming is the process that leads from an original formulation of a computing problem to executable programs. A normal logic program consists of a finite set of clauses. A valuation I of logic programming is a mapping from ground atoms to false or true. The single step operator of any logic programming is defined as a function (T p :I→I). Logic programming is well-suited to building the artificial intelligence systems. In this study, we established a new technique to compute the single step operators of logic programming in the radial basis function neural networks. To do that, we proposed a new technique to generate the training data sets of single step operators. The training data sets are used to build the neural networks. We used the recurrent radial basis function neural networks to get to the steady state (the fixed point of the operators). To improve the performance of the neural networks, we used the particle swarm optimization algorithm to train the networks

  17. Green procedures for the chemoselective synthesis of acylals and ...

    Indian Academy of Sciences (India)

    Li C J and Chan T H 1999 Tetrahedron 55 11149. 5. Li C J 2005 Chem. Rev. 105 3095. 6. Greene T W and Wuts P G M 1999 In Protective Groups in Organic Synthesis 3rd ed. (New York: John Wiley and. Sons) p. 306. 7. Gregory M J 1970 J. Chem. Soc. B. 1201. 8. Jin T S, Sun G, Li Y W and Li T S 2002 Green Chem. 4. 255.

  18. Shape Synthesis from Sketches via Procedural Models and Convolutional Networks.

    Science.gov (United States)

    Huang, Haibin; Kalogerakis, Evangelos; Yumer, Ersin; Mech, Radomir

    2017-08-01

    Procedural modeling techniques can produce high quality visual content through complex rule sets. However, controlling the outputs of these techniques for design purposes is often notoriously difficult for users due to the large number of parameters involved in these rule sets and also their non-linear relationship to the resulting content. To circumvent this problem, we present a sketch-based approach to procedural modeling. Given an approximate and abstract hand-drawn 2D sketch provided by a user, our algorithm automatically computes a set of procedural model parameters, which in turn yield multiple, detailed output shapes that resemble the user's input sketch. The user can then select an output shape, or further modify the sketch to explore alternative ones. At the heart of our approach is a deep Convolutional Neural Network (CNN) that is trained to map sketches to procedural model parameters. The network is trained by large amounts of automatically generated synthetic line drawings. By using an intuitive medium, i.e., freehand sketching as input, users are set free from manually adjusting procedural model parameters, yet they are still able to create high quality content. We demonstrate the accuracy and efficacy of our method in a variety of procedural modeling scenarios including design of man-made and organic shapes.

  19. Single-step production of the simvastatin precursor monacolin J by engineering of an industrial strain of Aspergillus terreus.

    Science.gov (United States)

    Huang, Xuenian; Liang, Yajing; Yang, Yong; Lu, Xuefeng

    2017-07-01

    Monacolin J is a key precursor for the synthesis of simvastatin (Zocor), an important drug for treating hypercholesterolemia. Industrially, monacolin J is manufactured through alkaline hydrolysis of lovastatin, a fungal polyketide produced by Aspergillus terreus. Multistep chemical processes for the conversion of lovastatin to simvastatin are laborious, cost expensive and environmentally unfriendly. A biocatalysis process for monacolin J conversion to simvastatin has been developed. However, direct bioproduction of monacolin J has not yet been achieved. Here, we identified a lovastatin hydrolase from Penicillium chrysogenum, which displays a 232-fold higher catalytic efficiency for the in vitro hydrolysis of lovastatin compared to a previously patented hydrolase, but no activity for simvastatin. Furthermore, we showed that an industrial A. terreus strain heterologously expressing this lovastatin hydrolase can produce monacolin J through single-step fermentation with high efficiency, approximately 95% of the biosynthesized lovastatin was hydrolyzed to monacolin J. Our results demonstrate a simple and green technical route for the production of monacolin J, which makes complete bioproduction of the cholesterol-lowering drug simvastatin feasible and promising. Copyright © 2017 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  20. Real-time, single-step bioassay using nanoplasmonic resonator with ultra-high sensitivity

    Science.gov (United States)

    Zhang, Xiang; Ellman, Jonathan A; Chen, Fanqing Frank; Su, Kai-Hang; Wei, Qi-Huo; Sun, Cheng

    2014-04-01

    A nanoplasmonic resonator (NPR) comprising a metallic nanodisk with alternating shielding layer(s), having a tagged biomolecule conjugated or tethered to the surface of the nanoplasmonic resonator for highly sensitive measurement of enzymatic activity. NPRs enhance Raman signals in a highly reproducible manner, enabling fast detection of protease and enzyme activity, such as Prostate Specific Antigen (paPSA), in real-time, at picomolar sensitivity levels. Experiments on extracellular fluid (ECF) from paPSA-positive cells demonstrate specific detection in a complex bio-fluid background in real-time single-step detection in very small sample volumes.

  1. Binary Factorization in Hopfield-Like Neural Networks: Single-Step Approximation and Computer Simulations

    Czech Academy of Sciences Publication Activity Database

    Frolov, A. A.; Sirota, A.M.; Húsek, Dušan; Muraviev, I. P.

    2004-01-01

    Roč. 14, č. 2 (2004), s. 139-152 ISSN 1210-0552 R&D Projects: GA ČR GA201/01/1192 Grant - others:BARRANDE(EU) 99010-2/99053; Intellectual computer Systems(EU) Grant 2.45 Institutional research plan: CEZ:AV0Z1030915 Keywords : nonlinear binary factor analysis * feature extraction * recurrent neural network * Single-Step approximation * neurodynamics simulation * attraction basins * Hebbian learning * unsupervised learning * neuroscience * brain function modeling Subject RIV: BA - General Mathematics

  2. Stress induced growth of Sn nanowires in a single step by sputtering method

    Science.gov (United States)

    Yadav, A.; Patel, N.; Miotello, A.; Kothari, D. C.

    2015-06-01

    Sn nanowires in aluminum film have been synthesized in a single step by co-sputtering of Al and Sn targets. Due to immiscibility of Sn and Al, co-sputtering leads to generation of stress in the composite film. In order to attain thermodynamic equilibrium, Sn separates from Al and diffuses towards the grain boundaries. External perturbation due to ambient atmosphere leads to corrosion at the grain boundaries forming pits which provide path for Sn to evolve. Owing to this, extrusion of Sn nanowires from Al film occurs to release the residual stress in the film.

  3. Highly Efficient Procedure for the Synthesis of Fructone Fragrance Using a Novel Carbon based Acid

    Directory of Open Access Journals (Sweden)

    Xuezheng Liang

    2010-08-01

    Full Text Available The novel carbon based acid has been synthesized via one-step hydrothermal carbonization of furaldehyde and hydroxyethylsulfonic acid. A highly efficient procedure for the synthesis of fructone has been developed using the novel carbon based acid. The results showed that the catalyst possessed high activity for the reaction, giving a yield of over 95%. The advantages of high activity, stability, reusability and low cost for a simple synthesis procedure and wide applicability to various diols and β-keto esters make this novel carbon based acid one of the best choices for the reaction.

  4. SYNTHESIS OF INFORMATION MODEL FOR ALTERNATIVE FUNCTIONAL DIAGNOSTICS PROCEDURE

    OpenAIRE

    P. F. Shchapov; R. P. Miguschenko

    2014-01-01

    Probabilistic approaches in information theory and information theory of measurement, allowing to calculate and analyze the amount expected to models measuring conversions and encoding tasks random measurement signals were considered. A probabilistic model of diagnostic information model transformation and diagnostic procedures was developed. Conditions for obtaining the maximum amount of diagnostic information were found out.

  5. Single-step fabrication of electrodes with controlled nanostructured surface roughness using optically-induced electrodeposition

    Science.gov (United States)

    Liu, N.; Li, M.; Liu, L.; Yang, Y.; Mai, J.; Pu, H.; Sun, Y.; Li, W. J.

    2018-02-01

    The customized fabrication of microelectrodes from gold nanoparticles (AuNPs) has attracted much attention due to their numerous applications in chemistry and biomedical engineering, such as for surface-enhanced Raman spectroscopy (SERS) and as catalyst sites for electrochemistry. Herein, we present a novel optically-induced electrodeposition (OED) method for rapidly fabricating gold electrodes which are also surface-modified with nanoparticles in one single step. The electrodeposition mechanism, with respect to the applied AC voltage signal and the elapsed deposition time, on the resulting morphology and particle sizes was investigated. The results from SEM and AFM analysis demonstrated that 80-200 nm gold particles can be formed on the surface of the gold electrodes. Simultaneously, both the size of the nanoparticles and the roughness of the fabricated electrodes can be regulated by the deposition time. Compared to state-of-the-art methods for fabricating microelectrodes with AuNPs, such as nano-seed-mediated growth and conventional electrodeposition, this OED technique has several advantages including: (1) electrode fabrication and surface modification using nanoparticles are completed in a single step, eliminating the need for prefabricating micro electrodes; (2) the patterning of electrodes is defined using a digitally-customized, projected optical image rather than using fixed physical masks; and (3) both the fabrication and surface modification processes are rapid, and the entire fabrication process only requires less than 6 s.

  6. Data condensed synthesis regarding kinesiotherapeutic procedures used in spasticity therapy

    OpenAIRE

    Moraru, E; Onose, G

    2014-01-01

    Abstract Spasticity represents an important feature of the upper motoneuron syndrome (UMNS). The clinical signs, such as the abnormal movement models, the unwanted muscular co-contractions, the muscular and joint rigidity with a consecutive deformity can be signs of spasticity and, also of upper motoneuron lesion. The different therapeutic options applied in the management of spasticity are a basic component of UMNS treatment scheme. This article presents the main kinesiotherapeutic procedure...

  7. [Embryo development in two single-step media: Analysis of 2059 sibling oocytes].

    Science.gov (United States)

    Durand, M; Sermondade, N; Herbemont, C; Benard, J; Gronier, H; Boujenah, J; Cédrin-Durnerin, I; Poncelet, C; Grynberg, M; Sifer, C

    2016-03-01

    The aim of this study was to compare embryo development cultured in two single-step media commercially available: Fert/Sage One Step® (Origio) and Continuous Single Culture® (CSC) (Irvine Scientific). A prospective auto-controlled study of sibling oocytes from women undergoing conventional in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI) was performed in our center from February to June 2015. After fertilization, for every patient, half of oocytes were cultured in the single-step Fert/Sage One Step® (serie SAGE) and the other half in the single-step CSC®(serie CSC). Fertilization and embryo morphology rates were assessed by day 1 to day 5-6 if needed. Embryo presentingtwo attempts of IVF and 133 of ICSI were analyzed, corresponding to 2059 inseminated or micro-injected oocytes. Fertilization rate were not different between the 2 series, respectively SAGE vs CSC (IVF: 73.4% vs 68.3% [P=0.49]; ICSI: 58.9% vs 63.8% [P=0.12]). No difference was found for embryo morphology, respectively SAGE vs CSC, at day 2 (top quality embryo at day 2 IVF: 34.4% vs 33% [P=0.98]; ICSI: 42.4% vs 44.9% [P=0.37]; and good quality embryo at day 2 IVF: 44% vs 50.2% [P=0.07]; ICSI: 64% vs 71% [P=0.35]); no difference at day 3 (top quality embryo at day 3 IVF: 19.4% vs 21.3% [P=0.61]; ICSI: 28.7% vs 27.4% [P=0.54]; and good quality embryo at day 3 IVF: 40.4% vs 50.2% [P=0.91]; ICSI: 51% vs 47.6% [P=0.47]). Blastocyst development rate were not different, respectively SAGE vs CSC (IVF: 39.9% vs 41.5% [P=0.63] with 42.9% vs 42.2% of good quality blastocyst [P=0.70]; ICSI: 41.1% vs 37.8% [P=0.18] with 32.9% vs 40.8% of good quality blastocyst [P=0.13]). No difference was found in the useful embryo rate in the 2 series SAGE vs CSC (IVF: 52.8% vs 55.2% [P=0.83]; ICSI: 62.4% vs 61.7% [P=0.70]). Embryo development and rate of useful embryos, transferred or frozen, were not different according to the embryo culture in single-step media Fert/Sage One Step® vs single-step

  8. Comparison on genomic predictions using three GBLUP methods and two single-step blending methods in the Nordic Holstein population

    Directory of Open Access Journals (Sweden)

    Gao Hongding

    2012-07-01

    Full Text Available Abstract Background A single-step blending approach allows genomic prediction using information of genotyped and non-genotyped animals simultaneously. However, the combined relationship matrix in a single-step method may need to be adjusted because marker-based and pedigree-based relationship matrices may not be on the same scale. The same may apply when a GBLUP model includes both genomic breeding values and residual polygenic effects. The objective of this study was to compare single-step blending methods and GBLUP methods with and without adjustment of the genomic relationship matrix for genomic prediction of 16 traits in the Nordic Holstein population. Methods The data consisted of de-regressed proofs (DRP for 5 214 genotyped and 9 374 non-genotyped bulls. The bulls were divided into a training and a validation population by birth date, October 1, 2001. Five approaches for genomic prediction were used: 1 a simple GBLUP method, 2 a GBLUP method with a polygenic effect, 3 an adjusted GBLUP method with a polygenic effect, 4 a single-step blending method, and 5 an adjusted single-step blending method. In the adjusted GBLUP and single-step methods, the genomic relationship matrix was adjusted for the difference of scale between the genomic and the pedigree relationship matrices. A set of weights on the pedigree relationship matrix (ranging from 0.05 to 0.40 was used to build the combined relationship matrix in the single-step blending method and the GBLUP method with a polygenetic effect. Results Averaged over the 16 traits, reliabilities of genomic breeding values predicted using the GBLUP method with a polygenic effect (relative weight of 0.20 were 0.3% higher than reliabilities from the simple GBLUP method (without a polygenic effect. The adjusted single-step blending and original single-step blending methods (relative weight of 0.20 had average reliabilities that were 2.1% and 1.8% higher than the simple GBLUP method, respectively. In

  9. Rapid, efficient and eco-friendly procedure for the synthesis of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 129; Issue 2. Rapid, efficient and eco-friendly procedure for the synthesis of quinoxalines under solvent-free conditions using sulfated polyborate as a recyclable catalyst. KRISHNA S INDALKAR CHETAN K KHATRI GANESH U CHATURBHUJ. Rapid Communication ...

  10. A new procedure for synthesis of α-aminophosphonates by aqueous ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 129; Issue 12. A new procedure for synthesis of α-aminophosphonates by aqueous formic acid as an effective and environment-friendly organocatalyst. ESMAEIL MOHAMMADIYAN HOSSEIN GHAFURI ALI KAKANEJADIFARD. REGULAR ARTICLE Volume 129 Issue ...

  11. Effect of a functional monomer (MDP) on the enamel bond durability of single-step self-etch adhesives.

    Science.gov (United States)

    Tsuchiya, Kenji; Takamizawa, Toshiki; Barkmeier, Wayne W; Tsubota, Keishi; Tsujimoto, Akimasa; Berry, Thomas P; Erickson, Robert L; Latta, Mark A; Miyazaki, Masashi

    2016-02-01

    The present study aimed to determine the effect of the functional monomer, 10-methacryloxydecyl dihydrogen phosphate (MDP), on the enamel bond durability of single-step self-etch adhesives through integrating fatigue testing and long-term water storage. An MDP-containing self-etch adhesive, Clearfil Bond SE ONE (SE), and an experimental adhesive, MDP-free (MF), which comprised the same ingredients as SE apart from MDP, were used. Shear bond strength (SBS) and shear fatigue strength (SFS) were measured with or without phosphoric acid pre-etching. The specimens were stored in distilled water for 24 h, 6 months, or 1 yr. Although similar SBS and SFS values were obtained for SE with pre-etching and for MF after 24 h of storage in distilled water, SE with pre-etching showed higher SBS and SFS values than MF after storage in water for 6 months or 1 yr. Regardless of the pre-etching procedure, SE showed higher SBS and SFS values after 6 months of storage in distilled water than after 24 h or 1 yr. To conclude, MDP might play an important role in enhancing not only bond strength but also bond durability with respect to repeated subcritical loading after long-term water storage. © 2015 Eur J Oral Sci.

  12. Expert system application to fault diagnosis and procedure synthesis

    International Nuclear Information System (INIS)

    Hajek, B.K.; Hashemi, S.; Bhatnagar, R.; Miller, D.W.; Stasenko, J.

    1987-01-01

    Two knowledge based systems have been developed to detect plant faults, to validate sensor data in a nuclear power plant, and to synthesize procedures to assure safety goals are met when a transient occurs. These two systems are being combined into a single system through a Plant Status Monitoring System (PSMS) and a common data base accessed by all the components of the integrated system. The system is designed to sit on top of an existing Safety Parameter Display System (SPDS), and to use the existing data acquisition and data control software of the SPDS. The integrated system will communicate with the SPDS software through a single database. This database will receive sensor values and equipment status indications in a form acceptable to the knowledge based system and according to an update plan designed specifically for the system

  13. Analytic observations for the d=1+ 1 bridge site (or single-step) deposition model

    International Nuclear Information System (INIS)

    Evans, J.W.; Kang, H.C.

    1991-01-01

    Some exact results for a reversible version of the d=1+1 bridge site (or single-step) deposition model are presented. Exact steady-state properties are determined directly for finite systems with various mean slopes. These show explicitly how the asymptotic growth velocity and fluctuations are quenched as the slope approaches its maximum allowed value. Next, exact hierarchial equations for the dynamics are presented. For the special case of ''equilibrium growth,'' these are analyzed exactly at the pair-correlation level directly for an infinite system. This provided further insight into asymptotic scaling behavior. Finally, the above hierarchy is compared with one generated from a discrete form of the Kardar--Parisi--Zhang equations. Some differences are described

  14. A single-step lithography system based on an enhanced robotic adhesive dispenser.

    Science.gov (United States)

    Xing, Jiyao; Rong, Weibin; Sun, Ding; Wang, Lefeng; Sun, Lining

    2016-09-01

    In the paper, we present a single-step lithography system whereby the robotically controlled micro-extrusion of resist adhesive onto a substrate surface to directly create resist adhesive patterns of interest. This system is modified from a robotic adhesive dispenser by shrinking the aperture of the nozzle to a few micrometers aiming to realize patterns at microscale. From experimental investigation, it is found that working factors including writing speed, working time, and applied pressure can be adopted to conveniently regulate the feature size (the width of the line features and the diameter of the dot features). To test its functionality, the system was used to pattern line features on silicon dioxide (SiO 2 ) and generate an array of square-like silicon microstructure by combining with wet etching. It provides a simple and flexible alternative tool to facilitate the development of microfabrication.

  15. Single-step fabrication of quantum funnels via centrifugal colloidal casting of nanoparticle films.

    KAUST Repository

    Kim, Jin Young

    2015-07-13

    Centrifugal casting of composites and ceramics has been widely employed to improve the mechanical and thermal properties of functional materials. This powerful method has yet to be deployed in the context of nanoparticles--yet size-effect tuning of quantum dots is among their most distinctive and application-relevant features. Here we report the first gradient nanoparticle films to be constructed in a single step. By creating a stable colloid of nanoparticles that are capped with electronic-conduction-compatible ligands we were able to leverage centrifugal casting for thin-films devices. This new method, termed centrifugal colloidal casting, is demonstrated to form films in a bandgap-ordered manner with efficient carrier funnelling towards the lowest energy layer. We constructed the first quantum-gradient photodiode to be formed in a single deposition step and, as a result of the gradient-enhanced electric field, experimentally measured the highest normalized detectivity of any colloidal quantum dot photodetector.

  16. Robust nanoplasmonic substrates for aptamer macroarrays with single-step detection of PDGF-BB.

    Science.gov (United States)

    Zhu, Dong; Yang, Rui Xiang; Tang, Yu-Ping; Li, Wei; Miao, Zhao Yi; Hu, Yue; Chen, Jun; Yu, Sheng; Wang, Juan; Xu, Chen Yang

    2016-11-15

    An aptamer macroarray on a robust nanoplasmonic substrate with fluorescence enhancement is developed for a single-step sensitive detection of human platelet-derived growth factor-BB (PDGF-BB), a predominant cancer biomarker in cancer angiogenesis. A hybrid Au-nanoparticles-poly (dimethylsiloxane) (PDMS) as nanoplasmonic substrate is prepared via the in-situ reduction of AuCl4(-) ions in PDMS matrixes onto 96 or 384 well plates. In the absence of target molecules, unfolded PDGF-BB aptamer conjugated with dye TAMRA is electrostatically bound to a positively charged poly-L-lysine (PLL)-coated Au nanocomposites film surface, and the fluorescence enhancement effects can be optimized by varying the distance between TAMRA and the Au nanocomposites film, which is easily adjusted by varying the thickness of the biocompatible poly-(acrylic acid) (PAA/PLL) multilayers, and thus metal-enhanced fluorescence of dye TAMRA conjugated with the aptamer is generated up to 15.2-fold. The interaction of the aptamer to its target induces the reversible conformation change of the aptamer, and consequently, the electrostatic potential is overcome by binding force. As a result, the target-binding interaction of the aptamer causes the irreversible detachment of the aptamer from the nanostructured Au film surface to decrease fluorescence of TAMRA. The aptamer macroarray provides not only the appropriate sensitivity for clinical diagnostics with a wide range of linear detection from 10pg/mL to 10μg/mL, high specificity for PDGF-BB against VEGF-165, VEGF-121, NaCl and IgG, and temporal biological stability, but also a single-step detection. We envision that the efficient and robust aptamer macroarray can be extended to the detection of other biomarkers. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Simple and Efficient Procedure for Synthesis of N'-Arylamidines Using Trimethylaluminum

    Energy Technology Data Exchange (ETDEWEB)

    Korbad, Balaji L.; Lee, Sanghyeup [Catholic Univ., of Daegu, Daegu (Korea, Republic of)

    2013-04-15

    In conclusion, we have developed simple and efficient procedure for the synthesis of N'-arylamidines using tri-methylaluminum, nitriles and aryl amines under mild condition. Aliphatic, aromatic nitriles were reacted well with a variety of aromatic amine to afford corresponding amidines in good to high yields. Amidines are an important class of compounds that have wide range of application in the fields of catalyst design, material science, medicinal chemistry and also shown the promising anti-inflammatory and analgesic activity. They are valuable synthons for synthesis of various heterocyclic compounds. In addition, recent studies have demonstrated their capacity to fix carbon dioxide.

  18. A mild and efficient procedure for the synthesis of ethers from various alkyl halides

    Directory of Open Access Journals (Sweden)

    Mosstafa Kazemi

    2013-10-01

    Full Text Available A simple, mild and practical procedure has been developed for the synthesis of symmetrical and unsymmetrical ethers by using DMSO, TBAI in the presence of K2CO3. We extended the utility of Potassium carbonate as an efficient base for the preparation of ethers. A wide range of alkyl aryl and dialkyl ethers are synthezied from treatment of aliphatic alcohols and phenols with various alkyl halides in the prescence of efficient base Potassium carbonate. Secondary alkyl halides were easily converted to corresponding ethers in releatively good yields . This is a mild, simple and practical procedure for the preparation of ethers in high yields and suitable times under mild condition.

  19. Evaluating tamsulosin hydrochloride-released microparticles prepared using single-step matrix coating.

    Science.gov (United States)

    Maeda, Atsushi; Shinoda, Tatsuki; Ito, Naoki; Baba, Keizo; Oku, Naoto; Mizumoto, Takao

    2011-04-15

    The objective of the present study was to determine the optimum composition for sustained-release of tamsulosin hydrochloride from microparticles intended for orally disintegrating tablets. Microparticles were prepared from an aqueous ethylcellulose dispersion (Aquacoa®), and an aqueous copolymer based on ethyl acrylate and methyl methacrylate dispersion (Eudragit®) NE30D), with microcrystalline cellulose as core particles with a fluidized bed coating process. Prepared microparticles were about 200 μm diameter and spherical. The microparticles were evaluated for in vitro drug release and in vivo absorption to assess bioequivalence in a commercial product, Harnal® pellets. The optimum ratio of Aquacoat® and Eudragit® NE30D in the matrix was 9:1. We observed similar drug release profiles in microparticles and Harnal® pellets. Higuchi model analysis of the in vitro drug release from microparticles was linear up to 80% release, typical of Fickian diffusion sustained-release profile. The in vivo absorption properties from microparticles were comparable to Harnal® pellets, and there was a linear relationship between in vitro drug release and in vivo drug release. In conclusion, this development produces microparticles in single-step coating, that provided a sustained-release of tamsulosin hydrochloride comparable to Harnal® pellets. Copyright © 2011 Elsevier B.V. All rights reserved.

  20. Single-step colloidal quantum dot films for infrared solar harvesting

    KAUST Repository

    Kiani, Amirreza

    2016-11-01

    Semiconductors with bandgaps in the near- to mid-infrared can harvest solar light that is otherwise wasted by conventional single-junction solar cell architectures. In particular, colloidal quantum dots (CQDs) are promising materials since they are cost-effective, processed from solution, and have a bandgap that can be tuned into the infrared (IR) via the quantum size effect. These characteristics enable them to harvest the infrared portion of the solar spectrum to which silicon is transparent. To date, IR CQD solar cells have been made using a wasteful and complex sequential layer-by-layer process. Here, we demonstrate ∼1 eV bandgap solar-harvesting CQD films deposited in a single step. By engineering a fast-drying solvent mixture for metal iodide-capped CQDs, we deposited active layers greater than 200 nm in thickness having a mean roughness less than 1 nm. We integrated these films into infrared solar cells that are stable in air and exhibit power conversion efficiencies of 3.5% under illumination by the full solar spectrum, and 0.4% through a simulated silicon solar cell filter.

  1. A novel single step percutaneous access sheath: the initial human experience.

    Science.gov (United States)

    Baldwin, D Duane; Maynes, Lincoln J; Desai, Premal J; Jellison, Forrest C; Tsai, Christopher K; Barker, Gary R

    2006-01-01

    A novel 1-step percutaneous access sheath NS has been developed that allows the insertion of a dilating balloon and renal access sheath in a single step. We present the initial human experience with this sheath. We performed a retrospective chart and database review of the initial 30 consecutive patients undergoing percutaneous nephrostolithotomy using the NS. Data collected included patient demographics, operative and recovery parameters, and complications. Mean patient age was 50.4 years (range 11 to 81), mean body mass index was 31.63 kg/m(2) (range 17.1 to 65) and mean preoperative stone area was 6.23 cm(2) (range 1 to 14.6). Six and 3 patients had full and partial staghorn calculi, respectively. Access was achieved via the upper pole in 16 patients, middle pole in 7 and lower pole in 7. Mean operative time was 114.8 minutes (range 61 to 237). Mean estimated blood loss was 145.5 cc (range 10 to 500) and mean postoperative hospital stay was 4.89 days (range 2 to 14). A total of 23 patients (76.7%) had no residual calculi on postoperative computerized tomography, 5 (16.7%) had residual fragments 4 mm or less and 2 (6.7%) had residual stone fragments greater than 4 mm. There were no complications related to the NS. The NS is safe, easy to use and has potential advantages compared to currently available renal access sheaths.

  2. Pharmaceutical 3D printing: Design and qualification of a single step print and fill capsule.

    Science.gov (United States)

    Smith, Derrick M; Kapoor, Yash; Klinzing, Gerard R; Procopio, Adam T

    2018-03-29

    Fused deposition modeling (FDM) 3D printing (3DP) has a potential to change how we envision manufacturing in the pharmaceutical industry. A more common utilization for FDM 3DP is to build upon existing hot melt extrusion (HME) technology where the drug is dispersed in the polymer matrix. However, reliable manufacturing of drug-containing filaments remains a challenge along with the limitation of active ingredients which can sustain the processing risks involved in the HME process. To circumvent this obstacle, a single step FDM 3DP process was developed to manufacture thin-walled drug-free capsules which can be filled with dry or liquid drug product formulations. Drug release from these systems is governed by the combined dissolution of the FDM capsule 'shell' and the dosage form encapsulated in these shells. To prepare the shells, the 3D printer files (extension '.gcode') were modified by creating discrete zones, so-called 'zoning process', with individual print parameters. Capsules printed without the zoning process resulted in macroscopic print defects and holes. X-ray computed tomography, finite element analysis and mechanical testing were used to guide the zoning process and printing parameters in order to manufacture consistent and robust capsule shell geometries. Additionally, dose consistencies of drug containing liquid formulations were investigated in this work. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. Single-step collision-free trajectory planning of biped climbing robots in spatial trusses.

    Science.gov (United States)

    Zhu, Haifei; Guan, Yisheng; Chen, Shengjun; Su, Manjia; Zhang, Hong

    For a biped climbing robot with dual grippers to climb poles, trusses or trees, feasible collision-free climbing motion is inevitable and essential. In this paper, we utilize the sampling-based algorithm, Bi-RRT, to plan single-step collision-free motion for biped climbing robots in spatial trusses. To deal with the orientation limit of a 5-DoF biped climbing robot, a new state representation along with corresponding operations including sampling, metric calculation and interpolation is presented. A simple but effective model of a biped climbing robot in trusses is proposed, through which the motion planning of one climbing cycle is transformed to that of a manipulator. In addition, the pre- and post-processes are introduced to expedite the convergence of the Bi-RRT algorithm and to ensure the safe motion of the climbing robot near poles as well. The piecewise linear paths are smoothed by utilizing cubic B-spline curve fitting. The effectiveness and efficiency of the presented Bi-RRT algorithm for climbing motion planning are verified by simulations.

  4. Compatibility of pedigree-based and marker-based relationship matrices for single-step genetic evaluation

    DEFF Research Database (Denmark)

    Christensen, Ole Fredslund

    2012-01-01

    Single-step methods for genomic prediction have recently become popular because they are conceptually simple and in practice such a method can completely replace a pedigree-based method for routine genetic evaluation. An issue with single-step methods is compatibility between the marker...... that it may be important that a single-step method is based on a model conditional on the observed markers. When data are from routine evaluation systems, selection affects the allele frequencies, and therefore both observed markers and observed phenotypes contain information about allele frequencies...... the marker-based relationship matrix is constructed assuming all allele frequencies equal to 0.5 and the pedigree-based relationship matrix is constructed using the unusual assumption that animals in the base population are related and inbreed with relationship coefficient alpha and inbreeding coefficient...

  5. Single-step reinitialization and extending algorithms for level-set based multi-phase flow simulations

    Science.gov (United States)

    Fu, Lin; Hu, Xiangyu Y.; Adams, Nikolaus A.

    2017-12-01

    We propose efficient single-step formulations for reinitialization and extending algorithms, which are critical components of level-set based interface-tracking methods. The level-set field is reinitialized with a single-step (non iterative) "forward tracing" algorithm. A minimum set of cells is defined that describes the interface, and reinitialization employs only data from these cells. Fluid states are extrapolated or extended across the interface by a single-step "backward tracing" algorithm. Both algorithms, which are motivated by analogy to ray-tracing, avoid multiple block-boundary data exchanges that are inevitable for iterative reinitialization and extending approaches within a parallel-computing environment. The single-step algorithms are combined with a multi-resolution conservative sharp-interface method and validated by a wide range of benchmark test cases. We demonstrate that the proposed reinitialization method achieves second-order accuracy in conserving the volume of each phase. The interface location is invariant to reapplication of the single-step reinitialization. Generally, we observe smaller absolute errors than for standard iterative reinitialization on the same grid. The computational efficiency is higher than for the standard and typical high-order iterative reinitialization methods. We observe a 2- to 6-times efficiency improvement over the standard method for serial execution. The proposed single-step extending algorithm, which is commonly employed for assigning data to ghost cells with ghost-fluid or conservative interface interaction methods, shows about 10-times efficiency improvement over the standard method while maintaining same accuracy. Despite their simplicity, the proposed algorithms offer an efficient and robust alternative to iterative reinitialization and extending methods for level-set based multi-phase simulations.

  6. Development of single step RT-PCR for detection of Kyasanur forest disease virus from clinical samples

    Directory of Open Access Journals (Sweden)

    Gouri Chaubal

    2018-02-01

    Discussion and conclusion: The previously published sensitive real time RT-PCR assay requires higher cost in terms of reagents and machine setup and technical expertise has been the primary reason for development of this assay. A single step RT-PCR is relatively easy to perform and more cost effective than real time RT-PCR in smaller setups in the absence of Biosafety Level-3 facility. This study reports the development and optimization of single step RT-PCR assay which is more sensitive and less time-consuming than nested RT-PCR and cost effective for rapid diagnosis of KFD viral RNA.

  7. Single step biotransformation of corn oil phytosterols to boldenone by a newly isolated Pseudomonas aeruginosa

    Directory of Open Access Journals (Sweden)

    Mohamed Eisa

    2016-09-01

    Full Text Available A new potent Pseudomonas aeruginosa isolate capable for biotransformation of corn oil phytosterol (PS to 4-androstene-3, 17-dione (AD, testosterone (T and boldenone (BOL was identified by phenotypic analysis and 16S rRNA gene sequencing. Sequential statistical strategy was used to optimize the biotransformation process mainly concerning BOL using Factorial design and response surface methodology (RSM. The production of BOL in single step microbial biotransformation from corn oil phytosterols by P. aeruginosa was not previously reported. Results showed that the pH concentration of the medium, (NH42SO4 and KH2PO4 were the most significant factors affecting BOL production. By analyzing the statistical model of three-dimensional surface plot, BOL production increased from 36.8% to 42.4% after the first step of optimization, and the overall biotransformation increased to 51.9%. After applying the second step of the sequential statistical strategy BOL production increased to 53.6%, and the overall biotransformation increased to 91.9% using the following optimized medium composition (g/l distilled water (NH42SO4, 2; KH2PO4, 4; Na2HPO4. 1; MgSO4·7H2O, 0.3; NaCl, 0.1; CaCl2·2H2O, 0.1; FeSO4·7H2O, 0.001; ammonium acetate 0.001; Tween 80, 0.05%; corn oil 0.5%; 8-hydroxyquinoline 0.016; pH 8; 200 rpm agitation speed and incubation time 36 h at 30 °C. Validation experiments proved the adequacy and accuracy of model, and the results showed the predicted value agreed well with the experimental values.

  8. A new plastic scintillation resin for single-step separation, concentration and measurement of technetium-99.

    Science.gov (United States)

    Barrera, J; Tarancón, A; Bagán, H; García, J F

    2016-09-14

    Technetium is a synthetic element with no stable isotopes, produced as waste in nuclear power plants and in cyclotrons used for nuclear medicine. The element has high mobility, in the form of TcO4(-); its determination is therefore important for environmental protection. Technetium is found in low concentrations and therefore common methods for its analysis include long treatments in several steps and require large amounts of reagents for its purification and preconcentration. Plastic scintillation resins (PSresin) are novel materials used to separate, preconcentrate and measure radionuclides in a single step. The objective of this study is to prepare and characterise a PSresin for the preconcentration and measurement of (99)Tc. The study first evaluates the reproducibility of the production of PSresins between batches and over time; showing good reproducibility and storage stability. Next, we studied the effect of some common non-radioactive interferences, showing small influences on measurement, and radioactive interferences ((36)Cl and (238)U/(234)U). (36)Cl can be removed by a simple treatment with 0.5 M HCl and (238)U/(234)U can be removed from the column by cleaning with a mixture of 0.1 M HNO3 and 0.1 M HF. In the latter case, a slight change in the morphology of the PSresin caused an increase in detection efficiency. Finally, the PSresin was applied to the measurement of real spiked samples (sea water and urine) with deviations lower than 10% in all cases. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Single step high-speed printing of continuous silver lines by laser-induced forward transfer

    Energy Technology Data Exchange (ETDEWEB)

    Puerto, D., E-mail: puerto@lp3.univ-mrs.fr [Aix-Marseille University, CNRS, LP3 laboratory Campus de Luminy, C.917, Marseille (France); Biver, E. [Aix-Marseille University, CNRS, LP3 laboratory Campus de Luminy, C.917, Marseille (France); Oxford Lasers Ltd., Unit 8, Moorbrook Park, Didcot, OX11 7HP (United Kingdom); Alloncle, A.-P.; Delaporte, Ph. [Aix-Marseille University, CNRS, LP3 laboratory Campus de Luminy, C.917, Marseille (France)

    2016-06-30

    Highlights: • We have performed an experimental study on laser micro-printing of silver nanoparticle inks. • We have achieved the printing of lines in a single pass at velocities of 17 m/s (1 MHz laser). • The ejection dynamics has been investigated by means of a time-resolved imaging technique. • The control of the donor film properties is of prime importance to print lines at high velocities. • Continuous conductive lines of silver inks are laser-printed on PET flexible substrates. - Abstract: The development of high-speed ink printing process by Laser-Induced Forward Transfer (LIFT) is of great interest for the printing community. To address the problems and the limitations of this process that have been previously identified, we have performed an experimental study on laser micro-printing of silver nanoparticle inks by LIFT and demonstrated for the first time the printing of continuous conductive lines in a single pass at velocities of 17 m/s using a 1 MHz repetition rate laser. We investigated the printing process by means of a time-resolved imaging technique to visualize the ejection dynamics of single and adjacent jets. The control of the donor film properties is of prime importance to achieve single step printing of continuous lines at high velocities. We use a 30 ps pulse duration laser with a wavelength of 343 nm and a repetition rate from 0.2 to 1 MHz. A galvanometric mirror head controls the distance between two consecutives jets by scanning the focused beam along an ink-coated donor substrate at different velocities. Droplets and lines of silver inks are laser-printed on glass and PET flexible substrates and we characterized their morphological quality by atomic force microscope (AFM) and optical microscope.

  10. Single-Step Purification of Ovalbumin from Egg White Using Aqueous Biphasic Systems.

    Science.gov (United States)

    Pereira, Matheus M; Cruz, Rafaela A P; Almeida, Mafalda R; Lima, Álvaro S; Coutinho, João A P; Freire, Mara G

    2016-06-01

    The ability of aqueous biphasic systems (ABS) composed of polyethylene glycols of different molecular weights (PEG 400, 600 and 1000) and buffered aqueous solutions of potassium citrate/citric acid (pH = 5.0 - 8.0) to selectively extract ovalbumin from egg white was here investigated. Phase diagrams, tie-lines and tie-line lengths were determined at 25ºC and the partitioning of ovalbumin in these systems was then evaluated. Aiming at optimizing the selective extraction of ovalbumin in the studied ABS, factors such as pH, PEG molecular weight and amount of the phase-forming components were initially investigated with pure commercial ovalbumin. In almost all ABS, it was observed a preferential partitioning of ovalbumin to the polymer-rich phase, with extraction efficiencies higher than 90%. The best ABS were then applied in the purification of ovalbumin from the real egg white matrix. In order to ascertain on the ovalbumin purity and yield, sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and size exclusion high performance liquid chromatography (SE-HPLC) analyses were conducted, confirming that the isolation/purification of ovalbumin from egg white was completely achieved in a single-step with a recovery yield of 65%. The results obtained show that polymer-salt-based ABS allow the selective extraction of ovalbumin from egg white with a simpler approach and better performance than previously reported. Finally, it is shown that ovalbumin can be completely recovered from the PEG-rich phase by an induced precipitation using an inexpensive and sustainable separation platform which can be easily applied on an industrial scale.

  11. Single-Step BLUP with Varying Genotyping Effort in Open-Pollinated Picea glauca

    Directory of Open Access Journals (Sweden)

    Blaise Ratcliffe

    2017-03-01

    Full Text Available Maximization of genetic gain in forest tree breeding programs is contingent on the accuracy of the predicted breeding values and precision of the estimated genetic parameters. We investigated the effect of the combined use of contemporary pedigree information and genomic relatedness estimates on the accuracy of predicted breeding values and precision of estimated genetic parameters, as well as rankings of selection candidates, using single-step genomic evaluation (HBLUP. In this study, two traits with diverse heritabilities [tree height (HT and wood density (WD] were assessed at various levels of family genotyping efforts (0, 25, 50, 75, and 100% from a population of white spruce (Picea glauca consisting of 1694 trees from 214 open-pollinated families, representing 43 provenances in Québec, Canada. The results revealed that HBLUP bivariate analysis is effective in reducing the known bias in heritability estimates of open-pollinated populations, as it exposes hidden relatedness, potential pedigree errors, and inbreeding. The addition of genomic information in the analysis considerably improved the accuracy in breeding value estimates by accounting for both Mendelian sampling and historical coancestry that were not captured by the contemporary pedigree alone. Increasing family genotyping efforts were associated with continuous improvement in model fit, precision of genetic parameters, and breeding value accuracy. Yet, improvements were observed even at minimal genotyping effort, indicating that even modest genotyping effort is effective in improving genetic evaluation. The combined utilization of both pedigree and genomic information may be a cost-effective approach to increase the accuracy of breeding values in forest tree breeding programs where shallow pedigrees and large testing populations are the norm.

  12. A new plastic scintillation resin for single-step separation, concentration and measurement of technetium-99

    Energy Technology Data Exchange (ETDEWEB)

    Barrera, J. [Department of Analytical Chemistry, Universitat de Barcelona, Martí i Franqués, 1-11, E-08028, Barcelona (Spain); Tarancón, A., E-mail: alex.tarancon@ub.edu [Department of Analytical Chemistry, Universitat de Barcelona, Martí i Franqués, 1-11, E-08028, Barcelona (Spain); Bagán, H. [Department of Pure and Applied Biochemistry, Lund University, Getingevägen 60, hus II, 22100 SE, Lund (Sweden); García, J.F. [Department of Analytical Chemistry, Universitat de Barcelona, Martí i Franqués, 1-11, E-08028, Barcelona (Spain)

    2016-09-14

    Technetium is a synthetic element with no stable isotopes, produced as waste in nuclear power plants and in cyclotrons used for nuclear medicine. The element has high mobility, in the form of TcO{sub 4}{sup −}; its determination is therefore important for environmental protection. Technetium is found in low concentrations and therefore common methods for its analysis include long treatments in several steps and require large amounts of reagents for its purification and preconcentration. Plastic scintillation resins (PSresin) are novel materials used to separate, preconcentrate and measure radionuclides in a single step. The objective of this study is to prepare and characterise a PSresin for the preconcentration and measurement of {sup 99}Tc. The study first evaluates the reproducibility of the production of PSresins between batches and over time; showing good reproducibility and storage stability. Next, we studied the effect of some common non-radioactive interferences, showing small influences on measurement, and radioactive interferences ({sup 36}Cl and {sup 238}U/{sup 234}U). {sup 36}Cl can be removed by a simple treatment with 0.5 M HCl and {sup 238}U/{sup 234}U can be removed from the column by cleaning with a mixture of 0.1 M HNO{sub 3} and 0.1 M HF. In the latter case, a slight change in the morphology of the PSresin caused an increase in detection efficiency. Finally, the PSresin was applied to the measurement of real spiked samples (sea water and urine) with deviations lower than 10% in all cases. - Highlights: • A plastic scintillation resin for selective analysis of {sup 99}Tc has been developed. • The method is valid for analysis of {sup 99}Tc in seawater and urine samples. • Presence of Cl{sup −}, NO{sub 3}{sup −}, SO{sub 4}{sup 2−}, {sup 36}Cl, U and Th not affect retention of {sup 99}Tc.

  13. Single-step production of a recyclable nanobiocatalyst for organophosphate pesticides biodegradation using functionalized bacterial magnetosomes.

    Directory of Open Access Journals (Sweden)

    Nicolas Ginet

    Full Text Available Enzymes are versatile catalysts in laboratories and on an industrial scale; improving their immobilization would be beneficial to broadening their applicability and ensuring their (reuse. Lipid-coated nano-magnets produced by magnetotactic bacteria are suitable for a universally applicable single-step method of enzyme immobilization. By genetically functionalizing the membrane surrounding these magnetite particles with a phosphohydrolase, we engineered an easy-to-purify, robust and recyclable biocatalyst to degrade ethyl-paraoxon, a commonly used pesticide. For this, we genetically fused the opd gene from Flavobacterium sp. ATCC 27551 encoding a paraoxonase to mamC, an abundant protein of the magnetosome membrane in Magnetospirillum magneticum AMB-1. The MamC protein acts as an anchor for the paraoxonase to the magnetosome surface, thus producing magnetic nanoparticles displaying phosphohydrolase activity. Magnetosomes functionalized with Opd were easily recovered from genetically modified AMB-1 cells: after cellular disruption with a French press, the magnetic nanoparticles are purified using a commercially available magnetic separation system. The catalytic properties of the immobilized Opd were measured on ethyl-paraoxon hydrolysis: they are comparable with the purified enzyme, with K(m (and k(cat values of 58 µM (and 178 s(-1 and 43 µM (and 314 s(-1 for the immobilized and purified enzyme respectively. The Opd, a metalloenzyme requiring a zinc cofactor, is thus properly matured in AMB-1. The recycling of the functionalized magnetosomes was investigated and their catalytic activity proved to be stable over repeated use for pesticide degradation. In this study, we demonstrate the easy production of functionalized magnetic nanoparticles with suitably genetically modified magnetotactic bacteria that are efficient as a reusable nanobiocatalyst for pesticides bioremediation in contaminated effluents.

  14. Direct Uniaxial Alignment of a Donor-Acceptor Semiconducting Polymer Using Single-Step Solution Shearing.

    Science.gov (United States)

    Shaw, Leo; Hayoz, Pascal; Diao, Ying; Reinspach, Julia Antonia; To, John W F; Toney, Michael F; Weitz, R Thomas; Bao, Zhenan

    2016-04-13

    The alignment of organic semiconductors (OSCs) in the active layers of electronic devices can confer desirable properties, such as enhanced charge transport properties due to better ordering, charge transport anisotropy for reduced device cross-talk, and polarized light emission or absorption. The solution-based deposition of highly aligned small molecule OSCs has been widely demonstrated, but the alignment of polymeric OSCs in thin films deposited directly from solution has typically required surface templating or complex pre- or postdeposition processing. Therefore, single-step solution processing and the charge transport enhancement afforded by alignment continue to be attractive. We report here the use of solution shearing to tune the degree of alignment in poly(diketopyrrolopyrrole-terthiophene) thin films by controlling the coating speed. A maximum dichroic ratio of ∼7 was achieved on unpatterned substrates without any additional pre- or postdeposition processing. The degree of polymer alignment was found to be a competition between the shear alignment of polymer chains in solution and the complex thin film drying process. Contrary to previous reports, no charge transport anisotropy was observed because of the small crystallite size relative to the channel length, a meshlike morphology, and the likelihood of increased grain boundaries in the direction transverse to coating. In fact, the lack of aligned morphological structures, coupled with observed anisotropy in X-ray diffraction data, suggests the alignment of polymer molecules in both the crystalline and the amorphous regions of the films. The shear speed at which maximum dichroism is achieved can be controlled by altering deposition parameters such as temperature and substrate treatment. Modest changes in molecular weight showed negligible effects on alignment, while longer polymer alkyl side chains were found to reduce the degree of alignment. This work demonstrates that solution shearing can be used

  15. Single-step isolation of extracellular vesicles by size-exclusion chromatography

    Science.gov (United States)

    Böing, Anita N.; van der Pol, Edwin; Grootemaat, Anita E.; Coumans, Frank A. W.; Sturk, Auguste; Nieuwland, Rienk

    2014-01-01

    Background Isolation of extracellular vesicles from plasma is a challenge due to the presence of proteins and lipoproteins. Isolation of vesicles using differential centrifugation or density-gradient ultracentrifugation results in co-isolation of contaminants such as protein aggregates and incomplete separation of vesicles from lipoproteins, respectively. Aim To develop a single-step protocol to isolate vesicles from human body fluids. Methods Platelet-free supernatant, derived from platelet concentrates, was loaded on a sepharose CL-2B column to perform size-exclusion chromatography (SEC; n=3). Fractions were collected and analysed by nanoparticle tracking analysis, resistive pulse sensing, flow cytometry and transmission electron microscopy. The concentrations of high-density lipoprotein cholesterol (HDL) and protein were measured in each fraction. Results Fractions 9–12 contained the highest concentrations of particles larger than 70 nm and platelet-derived vesicles (46%±6 and 61%±2 of totals present in all collected fractions, respectively), but less than 5% of HDL and less than 1% of protein (4.8%±1 and 0.65%±0.3, respectively). HDL was present mainly in fractions 18–20 (32%±2 of total), and protein in fractions 19–21 (36%±2 of total). Compared to the starting material, recovery of platelet-derived vesicles was 43%±23 in fractions 9–12, with an 8-fold and 70-fold enrichment compared to HDL and protein. Conclusions SEC efficiently isolates extracellular vesicles with a diameter larger than 70 nm from platelet-free supernatant of platelet concentrates. Application SEC will improve studies on the dimensional, structural and functional properties of extracellular vesicles. PMID:25279113

  16. Single-step isolation of extracellular vesicles by size-exclusion chromatography.

    Science.gov (United States)

    Böing, Anita N; van der Pol, Edwin; Grootemaat, Anita E; Coumans, Frank A W; Sturk, Auguste; Nieuwland, Rienk

    2014-01-01

    Isolation of extracellular vesicles from plasma is a challenge due to the presence of proteins and lipoproteins. Isolation of vesicles using differential centrifugation or density-gradient ultracentrifugation results in co-isolation of contaminants such as protein aggregates and incomplete separation of vesicles from lipoproteins, respectively. To develop a single-step protocol to isolate vesicles from human body fluids. Platelet-free supernatant, derived from platelet concentrates, was loaded on a sepharose CL-2B column to perform size-exclusion chromatography (SEC; n=3). Fractions were collected and analysed by nanoparticle tracking analysis, resistive pulse sensing, flow cytometry and transmission electron microscopy. The concentrations of high-density lipoprotein cholesterol (HDL) and protein were measured in each fraction. Fractions 9-12 contained the highest concentrations of particles larger than 70 nm and platelet-derived vesicles (46%±6 and 61%±2 of totals present in all collected fractions, respectively), but less than 5% of HDL and less than 1% of protein (4.8%±1 and 0.65%±0.3, respectively). HDL was present mainly in fractions 18-20 (32%±2 of total), and protein in fractions 19-21 (36%±2 of total). Compared to the starting material, recovery of platelet-derived vesicles was 43%±23 in fractions 9-12, with an 8-fold and 70-fold enrichment compared to HDL and protein. SEC efficiently isolates extracellular vesicles with a diameter larger than 70 nm from platelet-free supernatant of platelet concentrates. Application SEC will improve studies on the dimensional, structural and functional properties of extracellular vesicles.

  17. A rapid automated procedure for laboratory and shipboard spectrophotometric measurements of seawater alkalinity: continuously monitored single-step acid additions

    Science.gov (United States)

    Liu, X.; Byrne, R. H.; Lindemuth, M.; Easley, R. A.; Patsavas, M. C.

    2012-12-01

    An automated system for shipboard and laboratory alkalinity measurements is presented. The simple system, which consists of a Dosimat titrator to deliver acid volumetrically and a USB 4000 spectrophotometer to monitor the titration progress, provides fast, precise and accurate measurements of total alkalinity for oceanographic research. The analytical method is based on single-point HCl titrations of seawater samples of a known volume; bromol cresol purple is used as an indicator to determine the final pH. Field data from an Arctic cruise demonstrates accuracy and precision around 1 micro mol/kg and a sample processing rate of 6 min per sample.

  18. A green single-step procedure to synthesize Ag-containing nanocomposite coatings with low cytotoxicity and efficient antibacterial properties.

    Science.gov (United States)

    Ma, Kena; Gong, Lingling; Cai, Xinjie; Huang, Pin; Cai, Jing; Huang, Dan; Jiang, Tao

    2017-01-01

    Implant-associated infections still pose a serious threat leading to several complications. This study reported an environmentally benign Ag-containing nanocomposite coating with efficient antibacterial property fabricated on the metal implant via electrophoretic deposition (EPD). In such coatings, Ag 2 O/AgCl mixed with chitosan/gelatin (CS/G) polymers work together to exert the antibacterial property which could act as an alternative to traditional Ag nanoparticles. Scanning electron microscopy images showed the shuttle fiber-like morphology distributed lamellarly and some nanoparticles carved uniformly into the cross section. Transmission electron microscopy results revealed a core-shell-like structure of the released nanoparticles in experimental groups. The Ag-containing coatings exhibited strong antibacterial properties against Staphylococcus aureus strains and Escherichia coli strains. Meanwhile, the CCK-8 tests showed that after assembling with chitosan and gelatin polymers, the cytotoxicity of Ag was largely decreased. In addition, such coatings also exhibited strong bond strength with metal substrates and good degradable properties. Therefore, such Ag-containing CS/G coatings fabricated via EPD may be a promising candidate to be administrated in controlling the implant-associated infections.

  19. The Effects of Multiple-Step and Single-Step Directions on Fourth and Fifth Grade Students' Grammar Assessment Performance

    Science.gov (United States)

    Mazerik, Matthew B.

    2006-01-01

    The mean scores of English Language Learners (ELL) and English Only (EO) students in 4th and 5th grade (N = 110), across the teacher-administered Grammar Skills Test, were examined for differences in participants' scores on assessments containing single-step directions and assessments containing multiple-step directions. The results indicated no…

  20. An efficient single-step scheme for manipulating quantum information of two trapped ions beyond the Lamb-Dicke limit

    International Nuclear Information System (INIS)

    Wei, L.F.; Nori, Franco

    2003-01-01

    Based on the exact conditional quantum dynamics for a two-ion system, we propose an efficient single-step scheme for coherently manipulating quantum information of two trapped cold ions by using a pair of synchronous laser pulses. Neither the auxiliary atomic level nor the Lamb-Dicke approximation are needed

  1. Simultaneous determination of PPCPs, EDCs, and artificial sweeteners in environmental water samples using a single-step SPE coupled with HPLC-MS/MS and isotope dilution.

    Science.gov (United States)

    Tran, Ngoc Han; Hu, Jiangyong; Ong, Say Leong

    2013-09-15

    A high-throughput method for the simultaneous determination of 24 pharmaceuticals and personal care products (PPCPs), endocrine disrupting chemicals (EDCs) and artificial sweeteners (ASs) was developed. The method was based on a single-step solid phase extraction (SPE) coupled with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) and isotope dilution. In this study, a single-step SPE procedure was optimized for simultaneous extraction of all target analytes. Good recoveries (≥ 70%) were observed for all target analytes when extraction was performed using Chromabond(®) HR-X (500 mg, 6 mL) cartridges under acidic condition (pH 2). HPLC-MS/MS parameters were optimized for the simultaneous analysis of 24 PPCPs, EDCs and ASs in a single injection. Quantification was performed by using 13 isotopically labeled internal standards (ILIS), which allows correcting efficiently the loss of the analytes during SPE procedure, matrix effects during HPLC-MS/MS and fluctuation in MS/MS signal intensity due to instrument. Method quantification limit (MQL) for most of the target analytes was below 10 ng/L in all water samples. The method was successfully applied for the simultaneous determination of PPCPs, EDCs and ASs in raw wastewater, surface water and groundwater samples collected in a local catchment area in Singapore. In conclusion, the developed method provided a valuable tool for investigating the occurrence, behavior, transport, and the fate of PPCPs, EDCs and ASs in the aquatic environment. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Application of single step genomic BLUP under different uncertain paternity scenarios using simulated data.

    Directory of Open Access Journals (Sweden)

    Rafael Lara Tonussi

    Full Text Available The objective of this study was to investigate the application of BLUP and single step genomic BLUP (ssGBLUP models in different scenarios of paternity uncertainty with different strategies of scaling the G matrix to match the A22 matrix, using simulated data for beef cattle. Genotypes, pedigree, and phenotypes for age at first calving (AFC and weight at 550 days (W550 were simulated using heritabilities based on real data (0.12 for AFC and 0.34 for W550. Paternity uncertainty scenarios using 0, 25, 50, 75, and 100% of multiple sires (MS were studied. The simulated genome had a total length of 2,333 cM, containing 735,293 biallelic markers and 7,000 QTLs randomly distributed over the 29 BTA. It was assumed that QTLs explained 100% of the genetic variance. For QTL, the amount of alleles per loci randomly ranged from two to four. The BLUP model that considers phenotypic and pedigree data, and the ssGBLUP model that combines phenotypic, pedigree and genomic information were used for genetic evaluations. Four ways of scaling the mean of the genomic matrix (G to match to the mean of the pedigree relationship matrix among genotyped animals (A22 were tested. Accuracy, bias, and inflation were investigated for five groups of animals: ALL = all animals; BULL = only bulls; GEN = genotyped animals; FEM = females; and YOUNG = young males. With the BLUP model, the accuracies of genetic evaluations decreased for both traits as the proportion of unknown sires in the population increased. The EBV accuracy reduction was higher for GEN and YOUNG groups. By analyzing the scenarios for YOUNG (from 0 to 100% of MS, the decrease was 87.8 and 86% for AFC and W550, respectively. When applying the ssGBLUP model, the accuracies of genetic evaluation also decreased as the MS in the pedigree for both traits increased. However, the accuracy reduction was less than those observed for BLUP model. Using the same comparison (scenario 0 to 100% of MS, the accuracies reductions

  3. Influence of synthesis procedure on the formation and properties of zinc oxide

    International Nuclear Information System (INIS)

    Music, S.; Popovic, S.; Maljkovic, M.; Dragcevic, D.

    2002-01-01

    Formation and properties of zinc oxide were investigated in dependence on the synthesis procedure. Zinc oxide did not crystallize upon hydrothermal treatment of Zn(NO 3 ) 2 aqueous solutions containing urea, up to 160 deg. C. Hydrozincite was formed instead. Changes in the X-ray diffraction patterns and Fourier transform infrared (FT-IR) spectra were interpreted in terms of stacking disorder in hydrozincite crystals. Zinc oxide powder was obtained by thermal treatment in air of precipitated hydrozincite. The conditions for instantaneous synthesis of very fine zinc oxide particles were found. This procedure is based on addition of TMAH (tetramethylammonium hydroxide) solution to an ethanolic solution of zinc acetate dihydrate, up to pH∼14. On the other hand, addition of an equivalent volume of water to the ethanolic solution of zinc acetate dihydrate, prior to the addition of TMAH solution up to pH∼14, yielded ZnO flakes without any specific shape. All zinc oxide particles produced upon heating at 600 deg. C in air showed similar morphology and tendency to aggregation due to the sintering effect. The features of the FT-IR spectra of zinc oxide particles were related to their shapes

  4. The synthesis of radioactive polymeric microspheres for SPECT imaging during embolization procedures

    International Nuclear Information System (INIS)

    Carvalheira, Luciana; Pinto, José C.C.S.; Souza, Marcio N. de

    2017-01-01

    Vascular embolization is an important clinical procedure, frequently used to reduce the size of a tumor, to facilitate the removal of a tumor during surgery or to define a treatment of tumor malformation. In addition, imaging is an important component for the evaluation and care of patients undergoing vascular embolization. Nowadays, during the embolization procedure, the radiologist uses the Angiography or Fluoroscopy (X-Ray images) technique to estimate devascularization, since only pathological examinations are able to show the exact location of the blockade and microspheres. SPECT imaging is widely used in Brazil and provides images of superior quality to the mentioned techniques. Therefore, radioactive polymeric microspheres can be used as radioembolization agents for SPECT imaging. This technique can improve the resolution of images and, consequently, the embolization procedure efficacy of uterine fibroids for example, by allowing the track of particles distribution in the veins and tumor, the homogeneity of this distribution and the end of the embolization procedure. In this work, we evaluate the copolymerization of 4-vinylphenol and vinyl acetate as a synthesis route for a new radioembolization agent. GPC analysis results showed that this comonomer presence improved the molar mass distribution. In addition, bulk polymerization tests and kinetic studies showed that the selected comonomer retards the reaction time, but does not decrease the conversion percentage. Indeed, this result points out the necessity of a comonomer chemical modification to improve yield results. (author)

  5. The synthesis of radioactive polymeric microspheres for SPECT imaging during embolization procedures

    Energy Technology Data Exchange (ETDEWEB)

    Carvalheira, Luciana; Pinto, José C.C.S.; Souza, Marcio N. de, E-mail: luciana@ien.gov.br, E-mail: nele@eq.ufrj.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Coordenacao de Pos-Graduacao e Pesquisa de Engenharia (PEQ/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    Vascular embolization is an important clinical procedure, frequently used to reduce the size of a tumor, to facilitate the removal of a tumor during surgery or to define a treatment of tumor malformation. In addition, imaging is an important component for the evaluation and care of patients undergoing vascular embolization. Nowadays, during the embolization procedure, the radiologist uses the Angiography or Fluoroscopy (X-Ray images) technique to estimate devascularization, since only pathological examinations are able to show the exact location of the blockade and microspheres. SPECT imaging is widely used in Brazil and provides images of superior quality to the mentioned techniques. Therefore, radioactive polymeric microspheres can be used as radioembolization agents for SPECT imaging. This technique can improve the resolution of images and, consequently, the embolization procedure efficacy of uterine fibroids for example, by allowing the track of particles distribution in the veins and tumor, the homogeneity of this distribution and the end of the embolization procedure. In this work, we evaluate the copolymerization of 4-vinylphenol and vinyl acetate as a synthesis route for a new radioembolization agent. GPC analysis results showed that this comonomer presence improved the molar mass distribution. In addition, bulk polymerization tests and kinetic studies showed that the selected comonomer retards the reaction time, but does not decrease the conversion percentage. Indeed, this result points out the necessity of a comonomer chemical modification to improve yield results. (author)

  6. A green recyclable SO(3)H-carbon catalyst derived from glycerol for the production of biodiesel from FFA-containing karanja (Pongamia glabra) oil in a single step.

    Science.gov (United States)

    Prabhavathi Devi, B L A; Vijai Kumar Reddy, T; Vijaya Lakshmi, K; Prasad, R B N

    2014-02-01

    Simultaneous esterification and transesterification method is employed for the preparation of biodiesel from 7.5% free fatty acid (FFA) containing karanja (Pongamia glabra) oil using water resistant and reusable carbon-based solid acid catalyst derived from glycerol in a single step. The optimum reaction parameters for obtaining biodiesel in >99% yield by simultaneous esterification and transesterification are: methanol (1:45 mole ratio of oil), catalyst 20wt.% of oil, temperature 160°C and reaction time of 4h. After the reaction, the catalyst was easily recovered by filtration and reused for five times with out any deactivation under optimized conditions. This single-step process could be a potential route for biodiesel production from high FFA containing oils by simplifying the procedure and reducing costs and effluent generation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Single step synthesis of ZnS quantum dots and their microstructure characterization and electrical transport below room temperature

    Science.gov (United States)

    Mukherjee, P. S.; Patra, S.; Chakraborty, G.; Pradhan, S. K.; Meikap, A. K.

    2016-09-01

    Low dimensional cubic phase ZnS quantum dots (QDs) are formed by mechanical alloying the stoichiometric mixture of Zn and S powders at room temperature. During milling process the primary mixed phase ZnS is formed at about 3.5 h of milling and strain less single phase (cubic) ZnS QDs are formed with ∼4.5 nm in size after 20 h of milling. Detailed microstructure study has been done by both Rietveld analysis of x-ray diffraction pattern and high resolution transmission electron microscope images. Dc resistivity decreases with increasing temperature which can be explained by three-dimensional hopping conduction mechanisms. Observed negative magnetoconductivity has been analyzed by wave function shrinkage model. Alternating current conductivity can be described by the correlated barrier hopping conduction mechanism. Analysis of complex impedance indicates that the grain boundary resistance is found to be dominating over the grain resistance. Relaxation behavior has been explained by the analysis of the electric modulus.

  8. Photocatalytic segmented nanowires and single-step iron oxide nanotube synthesis: Templated electrodeposition as all-round tool

    NARCIS (Netherlands)

    Maas, M.G.; Rodijk, E.J.B.; Maijenburg, A.W.; ten Elshof, Johan E.; Blank, David H.A.; Nielsch, K.; Fontcuberta i Morral, A.; Holt, J.K.; Thomson, C.V.

    2010-01-01

    Templated electrodeposition was used to synthesize silver-zinc oxide nanowires and iron oxide (Fe2O3) nanotubes in polycarbonate track etched (PCTE) membranes. Metal/oxide segmented nanowires were made to produce hydrogen gas from a water/methanol mixture under ultraviolet irradiation. It was

  9. Single-step uncalcined N-TiO{sub 2} synthesis, characterizations and its applications on alachlor photocatalytic degradations

    Energy Technology Data Exchange (ETDEWEB)

    Suwannaruang, Totsaporn, E-mail: totsaporn.eng.kku@gmail.com [Department of Chemical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen 40002 (Thailand); Chemical Kinetics and Applied Catalysis Laboratory (CKCL), Faculty of Engineering, Khon Kaen University, Khon Kaen 40002 (Thailand); Wantala, Kitirote, E-mail: kitirote@kku.ac.th [Department of Chemical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen 40002 (Thailand); Chemical Kinetics and Applied Catalysis Laboratory (CKCL), Faculty of Engineering, Khon Kaen University, Khon Kaen 40002 (Thailand); Research Center for Environmental and Hazardous Substance Management (EHSM), Faculty of Engineering, Khon Kaen University, Khon Kaen 40002 (Thailand)

    2016-09-01

    Graphical abstract: - Highlights: • N-TiO{sub 2} can be synthesized on one crystal in one particle. • Surface area has been relating to performance of photocatalysts. • Energy band-gap of N-TiO{sub 2} show lower than 3.0 eV. - Abstract: The aims of this research were to synthesize nitrogen doped TiO{sub 2} (N-TiO{sub 2}) photocatalysts produced by hydrothermal technique and to test the degradation performance of alachlor by photocatalytic process under UV irradiations in the effect of aging temperature and time in the preparation process. The characterizations of synthesized TiO{sub 2} such as specific surface area, particle size, phase structure and elements were analyzed by using the Brunauer–Emmett–Teller (BET) technique, Transmission Electron Microscopy (TEM), X-ray Diffractometer (XRD) and Energy Dispersive X-ray spectrometer (EDX), respectively. The Central Composite Design (CCD) was used to design the experiment to determine the optimal condition, main effects and their interactions by using specific surface area, percent alachlor removal and observed first-order rate constant as responses. The kinetic reactions of alachlor degradation were explained by using Langmuir-Hinshelwood expression to confirm the reaction took place on the surface of photocatalyst. The results showed that the effect of aging temperatures was significant on surface area, whereas aging time was insignificant. Additionally, the square term of aging temperature and interaction term were shown significant on the specific surface area as well. The highest specific surface area from response surface at aging temperature between 150–175 °C and aging time between 6–13 h was found in a range of 100–106 m{sup 2}/g. The average particle size of TiO{sub 2} was similar to crystallite size. Therefore, it can be concluded that one particle has only one crystal. The element analysis has shown 10% of nitrogen in TiO{sub 2} structure that the energy band-gap about 2.95 eV was found. Although, the effects of aging temperature and time on percent alachlor removal and observed first-order rate constants were insignificant, both terms were significant in term of the square for alachlor photocatalytic degradation. The optimal condition of both responses was achieved at an aging temperature of 145 °C and aging time of 12 h.

  10. Comparative analysis of single-step and two-step biodiesel production using supercritical methanol on laboratory-scale

    International Nuclear Information System (INIS)

    Micic, Radoslav D.; Tomić, Milan D.; Kiss, Ferenc E.; Martinovic, Ferenc L.; Simikić, Mirko Ð.; Molnar, Tibor T.

    2016-01-01

    Highlights: • Single-step supercritical transesterification compared to the two-step process. • Two-step process: oil hydrolysis and subsequent supercritical methyl esterification. • Experiments were conducted in a laboratory-scale batch reactor. • Higher biodiesel yields in two-step process at milder reaction conditions. • Two-step process has potential to be cost-competitive with the single-step process. - Abstract: Single-step supercritical transesterification and two-step biodiesel production process consisting of oil hydrolysis and subsequent supercritical methyl esterification were studied and compared. For this purpose, comparative experiments were conducted in a laboratory-scale batch reactor and optimal reaction conditions (temperature, pressure, molar ratio and time) were determined. Results indicate that in comparison to a single-step transesterification, methyl esterification (second step of the two-step process) produces higher biodiesel yields (95 wt% vs. 91 wt%) at lower temperatures (270 °C vs. 350 °C), pressures (8 MPa vs. 12 MPa) and methanol to oil molar ratios (1:20 vs. 1:42). This can be explained by the fact that the reaction system consisting of free fatty acid (FFA) and methanol achieves supercritical condition at milder reaction conditions. Furthermore, the dissolved FFA increases the acidity of supercritical methanol and acts as an acid catalyst that increases the reaction rate. There is a direct correlation between FFA content of the product obtained in hydrolysis and biodiesel yields in methyl esterification. Therefore, the reaction parameters of hydrolysis were optimized to yield the highest FFA content at 12 MPa, 250 °C and 1:20 oil to water molar ratio. Results of direct material and energy costs comparison suggest that the process based on the two-step reaction has the potential to be cost-competitive with the process based on single-step supercritical transesterification. Higher biodiesel yields, similar or lower energy

  11. About the methodology of system synthesis of decision-makings and its procedures automation

    Directory of Open Access Journals (Sweden)

    D. P. Oleynikov

    2016-01-01

     the use of computer equipment, which require signifi cant time expenses on the development of appropriate solutions. Therefore, it was decided to develop an automated system to improve the effectiveness of the implementation of a number of methodology procedures.Results.During the study were identifi ed use cases of the system, in accordance with which were formed the conceptual and technical architecture of the system, highlights the key subsystems of the reference data, knowledge about the methods of decision-making and synthesis strategies, and identifi es their development tools. As the database used by the DBMS MS SQL Server, as the client side – Borland Delphi.Conclusion. Due to the high complexity of formalization of intellectual, creative, methodologies operations, the focus of automation is the support of conceptual analysis of the decisionmakings subject area and formation on its basis the knowledge base of intellectual operations together with their characteristic features, aimed to combine operations that make up the group of methods of synthesis strategies decision-making and implementation of the search function on the basis of a intellectual operations knowledge base.

  12. Thin film complementary metal oxide semiconductor (CMOS) device using a single-step deposition of the channel layer

    KAUST Repository

    Nayak, Pradipta K.

    2014-04-14

    We report, for the first time, the use of a single step deposition of semiconductor channel layer to simultaneously achieve both n-and p-type transport in transparent oxide thin film transistors (TFTs). This effect is achieved by controlling the concentration of hydroxyl groups (OH-groups) in the underlying gate dielectrics. The semiconducting tin oxide layer was deposited at room temperature, and the maximum device fabrication temperature was 350C. Both n and p-type TFTs showed fairly comparable performance. A functional CMOS inverter was fabricated using this novel scheme, indicating the potential use of our approach for various practical applications.

  13. Enhanced infrared transmittance properties in ultrafine MgAl2O4 nanoparticles synthesised by a single step combustion method, followed by hybrid microwave sintering

    Science.gov (United States)

    Mathew, C. T.; Vidya, S.; Koshy, Jacob; Solomon, Sam; Thomas, Jijimon K.

    2015-09-01

    Infrared transparent ceramics found to have potential applications as infrared windows and domes in strategic defence and space missions. Synthesis of ultrafine nanostructured MgAl2O4 ceramics by a modified single step auto-igniting combustion technique, followed by sintering of the sample by resistive and resistive-microwave hybrid heating to high density and their excellent infrared transmission characteristics are presented in this paper. Structural characterisations of MgAl2O4 nanoparticles reveal that the as prepared powder is phase pure, with average crystallite size ∼15 nm and possess a cubic structure. Optical band gap calculated using the Kubelka-Munk method is 5.75 eV. The thermal stability of the nanopowder at elevated temperatures has been studied using thermo gravimetric analysis (TGA) and differential thermal analysis (DTA). Hybrid heating yield a substantial reduction in sintering temperature and soaking time relative to the conventional resistive heating, and the samples achieved >99% density by microwave-resistive hybrid heating. Scanning electron micrograph (SEM) showed that the pellets are well sintered. The pellet sintered by hybrid heating showed a better transmittance of ∼79% in the UV-Visible region and ∼82% in the mid IR region compared to pellet sintered by resistive heating which has ∼68% in the UV-Visible region and ∼66% in the mid IR region. The results confirm the effective use of nanocrystalline powders from modified combustion synthesis as starting material for the development of high quality IR transparent windows and domes. In addition the microwave hybrid sintering technique employed in the present study also contributes to the results of better transmittance characteristics in highly densified MgAl2O4 ceramic pellets.

  14. Rapid, single-step most-probable-number method for enumerating fecal coliforms in effluents from sewage treatment plants

    Science.gov (United States)

    Munoz, E. F.; Silverman, M. P.

    1979-01-01

    A single-step most-probable-number method for determining the number of fecal coliform bacteria present in sewage treatment plant effluents is discussed. A single growth medium based on that of Reasoner et al. (1976) and consisting of 5.0 gr. proteose peptone, 3.0 gr. yeast extract, 10.0 gr. lactose, 7.5 gr. NaCl, 0.2 gr. sodium lauryl sulfate, and 0.1 gr. sodium desoxycholate per liter is used. The pH is adjusted to 6.5, and samples are incubated at 44.5 deg C. Bacterial growth is detected either by measuring the increase with time in the electrical impedance ratio between the innoculated sample vial and an uninnoculated reference vial or by visual examination for turbidity. Results obtained by the single-step method for chlorinated and unchlorinated effluent samples are in excellent agreement with those obtained by the standard method. It is suggested that in automated treatment plants impedance ratio data could be automatically matched by computer programs with the appropriate dilution factors and most probable number tables already in the computer memory, with the corresponding result displayed as fecal coliforms per 100 ml of effluent.

  15. Effect of increased exposure times on amount of residual monomer released from single-step self-etch adhesives.

    Science.gov (United States)

    Altunsoy, Mustafa; Botsali, Murat Selim; Tosun, Gonca; Yasar, Ahmet

    2015-10-16

    The aim of this study was to evaluate the effect of increased exposure times on the amount of residual Bis-GMA, TEGDMA, HEMA and UDMA released from single-step self-etch adhesive systems. Two adhesive systems were used. The adhesives were applied to bovine dentin surface according to the manufacturer's instructions and were polymerized using an LED curing unit for 10, 20 and 40 seconds (n = 5). After polymerization, the specimens were stored in 75% ethanol-water solution (6 mL). Residual monomers (Bis-GMA, TEGDMA, UDMA and HEMA) that were eluted from the adhesives (after 10 minutes, 1 hour, 1 day, 7 days and 30 days) were analyzed by high-performance liquid chromatography (HPLC). The data were analyzed using 1-way analysis of variance and Tukey HSD tests. Among the time periods, the highest amount of released residual monomers from adhesives was observed in the 10th minute. There were statistically significant differences regarding released Bis-GMA, UDMA, HEMA and TEGDMA between the adhesive systems (p<0.05). There were no significant differences among the 10, 20 and 40 second polymerization times according to their effect on residual monomer release from adhesives (p>0.05). Increasing the polymerization time did not have an effect on residual monomer release from single-step self-etch adhesives.

  16. Efficient biotinylation and single-step purification of tagged transcription factors in mammalian cells and transgenic mice

    Science.gov (United States)

    de Boer, Ernie; Rodriguez, Patrick; Bonte, Edgar; Krijgsveld, Jeroen; Katsantoni, Eleni; Heck, Albert; Grosveld, Frank; Strouboulis, John

    2003-06-01

    Proteomic approaches require simple and efficient protein purification methodologies that are amenable to high throughput. Biotinylation is an attractive approach for protein complex purification due to the very high affinity of avidin/streptavidin for biotinylated templates. Here, we describe an approach for the single-step purification of transcription factor complex(es) based on specific in vivo biotinylation. We expressed the bacterial BirA biotin ligase in mammalian cells and demonstrated very efficient biotinylation of a hematopoietic transcription factor bearing a small (23-aa) artificial peptide tag. Biotinylation of the tagged transcription factor altered neither the factor's protein interactions or DNA binding properties in vivo nor its subnuclear distribution. Using this approach, we isolated the biotin-tagged transcription factor and at least one other known interacting protein from crude nuclear extracts by direct binding to streptavidin beads. Finally, this method works efficiently in transgenic mice, thus raising the prospect of using biotinylation tagging in protein complex purification directly from animal tissues. Therefore, BirA-mediated biotinylation of tagged proteins provides the basis for the single-step purification of proteins from mammalian cells.

  17. Linkers, resins, and general procedures for solid-phase peptide synthesis

    DEFF Research Database (Denmark)

    Shelton, Anne Pernille Tofteng; Jensen, Knud Jørgen

    2013-01-01

    and linkers for solid-phase synthesis is a key parameter for successful peptide synthesis. This chapter provides an overview of the most common and useful resins and linkers for the synthesis of peptides with C-terminal amides, carboxylic acids, and more. The chapter finishes with robust protocols for general...

  18. An Improved Single-Step Cloning Strategy Simplifies the Agrobacterium tumefaciens-Mediated Transformation (ATMT)-Based Gene-Disruption Method for Verticillium dahliae.

    Science.gov (United States)

    Wang, Sheng; Xing, Haiying; Hua, Chenlei; Guo, Hui-Shan; Zhang, Jie

    2016-06-01

    The soilborne fungal pathogen Verticillium dahliae infects a broad range of plant species to cause severe diseases. The availability of Verticillium genome sequences has provided opportunities for large-scale investigations of individual gene function in Verticillium strains using Agrobacterium tumefaciens-mediated transformation (ATMT)-based gene-disruption strategies. Traditional ATMT vectors require multiple cloning steps and elaborate characterization procedures to achieve successful gene replacement; thus, these vectors are not suitable for high-throughput ATMT-based gene deletion. Several advancements have been made that either involve simplification of the steps required for gene-deletion vector construction or increase the efficiency of the technique for rapid recombinant characterization. However, an ATMT binary vector that is both simple and efficient is still lacking. Here, we generated a USER-ATMT dual-selection (DS) binary vector, which combines both the advantages of the USER single-step cloning technique and the efficiency of the herpes simplex virus thymidine kinase negative-selection marker. Highly efficient deletion of three different genes in V. dahliae using the USER-ATMT-DS vector enabled verification that this newly-generated vector not only facilitates the cloning process but also simplifies the subsequent identification of fungal homologous recombinants. The results suggest that the USER-ATMT-DS vector is applicable for efficient gene deletion and suitable for large-scale gene deletion in V. dahliae.

  19. Compact Ag@Fe3O4 Core-shell Nanoparticles by Means of Single-step Thermal Decomposition Reaction

    Science.gov (United States)

    Brollo, Maria Eugênia F.; López-Ruiz, Román; Muraca, Diego; Figueroa, Santiago J. A.; Pirota, Kleber R.; Knobel, Marcelo

    2014-10-01

    A temperature pause introduced in a simple single-step thermal decomposition of iron, with the presence of silver seeds formed in the same reaction mixture, gives rise to novel compact heterostructures: brick-like Ag@Fe3O4 core-shell nanoparticles. This novel method is relatively easy to implement, and could contribute to overcome the challenge of obtaining a multifunctional heteroparticle in which a noble metal is surrounded by magnetite. Structural analyses of the samples show 4 nm silver nanoparticles wrapped within compact cubic external structures of Fe oxide, with curious rectangular shape. The magnetic properties indicate a near superparamagnetic like behavior with a weak hysteresis at room temperature. The value of the anisotropy involved makes these particles candidates to potential applications in nanomedicine.

  20. Colloidal Quantum Dot Inks for Single-Step-Fabricated Field-Effect Transistors: The Importance of Postdeposition Ligand Removal.

    Science.gov (United States)

    Balazs, Daniel M; Rizkia, Nisrina; Fang, Hong-Hua; Dirin, Dmitry N; Momand, Jamo; Kooi, Bart J; Kovalenko, Maksym V; Loi, Maria Antonietta

    2018-02-14

    Colloidal quantum dots are a class of solution-processed semiconductors with good prospects for photovoltaic and optoelectronic applications. Removal of the surfactant, so-called ligand exchange, is a crucial step in making the solid films conductive, but performing it in solid state introduces surface defects and cracks in the films. Hence, the formation of thick, device-grade films have only been possible through layer-by-layer processing, limiting the technological interest for quantum dot solids. Solution-phase ligand exchange before the deposition allows for the direct deposition of thick, homogeneous films suitable for device applications. In this work, fabrication of field-effect transistors in a single step is reported using blade-coating, an upscalable, industrially relevant technique. Most importantly, a postdeposition washing step results in device properties comparable to the best layer-by-layer processed devices, opening the way for large-scale fabrication and further interest from the research community.

  1. Penerapan Metode Diagnosis Cepat Virus Avian Influenza H5N1 dengan Metode Single Step Multiplex RT-PCR

    Directory of Open Access Journals (Sweden)

    Aris Haryanto

    2010-12-01

    Full Text Available Avian influenza (AI virus is a segmented single stranded (ss RNA virus with negative polarity andbelong to the Orthomyxoviridae family. Diagnose of AI virus can be performed using conventional methodsbut it has low sensitivity and specificity. The objective of the research was to apply rapid, precise, andaccurate diagnostic method for AI virus and also to determine its type and subtype based on the SingleStep Multiplex Reverse Transcriptase-Polymerase Chain Reaction targeting M, H5, and N1 genes. In thismethod M, H5 and NI genes were simultaneously amplified in one PCR tube. The steps of this researchconsist of collecting viral RNAs from 10 different AI samples originated from Maros Disease InvestigationCenter during 2007. DNA Amplification was conducted by Simplex RT-PCR using M primer set. Then, bysingle step multiplex RT-PCR were conducted simultaneously using M, H5 and N1 primers set. The RTPCRproducts were then separated on 1.5% agarose gel, stained by ethidum bromide and visualized underUV transilluminator. Results showed that 8 of 10 RNA virus samples could be amplified by Simplex RTPCRfor M gene which generating a DNA fragment of 276 bp. Amplification using multiplex RT-PCRmethod showed two of 10 samples were AI positive using multiplex RT-PCR, three DNA fragments weregenerated consisting of 276 bp for M gene, 189 bp for H5 gene, and 131 bp for N1. In this study, rapid andeffective diagnosis method for AI virus can be conducted by using simultaneous Single Step Multiplex RTPCR.By this technique type and subtype of AI virus, can also be determined, especially H5N1.

  2. Synthesis of Substituted 1,4-Diazepines and 1,5-Benzodiazepines Using an Efficient Heteropolyacid-Catalyzed Procedure

    Directory of Open Access Journals (Sweden)

    Sihame Benadji

    2010-12-01

    Full Text Available An efficient and improved procedure for the synthesis of 1,4-diazepine and 1,5-benzodiazepine derivatives via the reaction of ketimine intermediates with aldehydes in the presence of Keggin-type heteropolyacids (HPAs was developed. High yields and short reaction times were obtained for both electron-releasing and electron-withdrawing substituted 1,4-diazepine  and 1,5-benzodiazepines derivatives.

  3. Synthesis of substituted 1,4-diazepines and 1,5-benzodiazepines using an efficient heteropolyacid-catalyzed procedure.

    Science.gov (United States)

    Kaoua, Rachedine; Bennamane, Norah; Bakhta, Saliha; Benadji, Sihame; Rabia, Cherifa; Nedjar-Kolli, Bellara

    2010-12-28

    An efficient and improved procedure for the synthesis of 1,4-diazepine and 1,5-benzodiazepine derivatives via the reaction of ketimine intermediates with aldehydes in the presence of Keggin-type heteropolyacids (HPAs) was developed. High yields and short reaction times were obtained for both electron-releasing and electron-withdrawing substituted 1,4-diazepine  and 1,5-benzodiazepines derivatives.

  4. Blastocyst utilization rates after continuous culture in two commercial single-step media: a prospective randomized study with sibling oocytes.

    Science.gov (United States)

    Sfontouris, Ioannis A; Kolibianakis, Efstratios M; Lainas, George T; Venetis, Christos A; Petsas, George K; Tarlatzis, Basil C; Lainas, Tryfon G

    2017-10-01

    The aim of this study is to determine whether blastocyst utilization rates are different after continuous culture in two different commercial single-step media. This is a paired randomized controlled trial with sibling oocytes conducted in infertility patients, aged ≤40 years with ≥10 oocytes retrieved assigned to blastocyst culture and transfer. Retrieved oocytes were randomly allocated to continuous culture in either Sage one-step medium (Origio) or Continuous Single Culture (CSC) medium (Irvine Scientific) without medium renewal up to day 5 post oocyte retrieval. Main outcome measure was the proportion of embryos suitable for clinical use (utilization rate). A total of 502 oocytes from 33 women were randomly allocated to continuous culture in either Sage one-step medium (n = 250) or CSC medium (n = 252). Fertilization was performed by either in vitro fertilization or intracytoplasmic sperm injection, and embryo transfers were performed on day 5. Two patients had all blastocysts frozen due to the occurrence of severe ovarian hyperstimulation syndrome. Fertilization and cleavage rates, as well as embryo quality on day 3, were similar in the two media. Blastocyst utilization rates (%, 95% CI) [55.4% (46.4-64.1) vs 54.7% (44.9-64.6), p = 0.717], blastocyst formation rates [53.6% (44.6-62.5) vs 51.9 (42.2-61.6), p = 0.755], and proportion of good quality blastocysts [36.8% (28.1-45.4) vs 36.1% (27.2-45.0), p = 0.850] were similar in Sage one-step and CSC media, respectively. Continuous culture of embryos in Sage one-step and CSC media is associated with similar blastocyst development and utilization rates. Both single-step media appear to provide adequate support during in vitro preimplantation embryo development. Whether these observations are also valid for other continuous single medium protocols remains to be determined. NCT02302638.

  5. Magnetic Beads-Based Sensor with Tailored Sensitivity for Rapid and Single-Step Amperometric Determination of miRNAs

    Directory of Open Access Journals (Sweden)

    Eva Vargas

    2017-11-01

    Full Text Available This work describes a sensitive amperometric magneto-biosensor for single-step and rapid determination of microRNAs (miRNAs. The developed strategy involves the use of direct hybridization of the target miRNA (miRNA-21 with a specific biotinylated DNA probe immobilized on streptavidin-modified magnetic beads (MBs, and labeling of the resulting heteroduplexes with a specific DNA–RNA antibody and the bacterial protein A (ProtA conjugated with an horseradish peroxidase (HRP homopolymer (Poly-HRP40 as an enzymatic label for signal amplification. Amperometric detection is performed upon magnetic capture of the modified MBs onto the working electrode surface of disposable screen-printed carbon electrodes (SPCEs using the H2O2/hydroquinone (HQ system. The magnitude of the cathodic signal obtained at −0.20 V (vs. the Ag pseudo-reference electrode demonstrated linear dependence with the concentration of the synthetic target miRNA over the 1.0 to 100 pM range. The method provided a detection limit (LOD of 10 attomoles (in a 25 μL sample without any target miRNA amplification in just 30 min (once the DNA capture probe-MBs were prepared. This approach shows improved sensitivity compared with that of biosensors constructed with the same anti-DNA–RNA Ab as capture instead of a detector antibody and further labeling with a Strep-HRP conjugate instead of the Poly-HRP40 homopolymer. The developed strategy involves a single step working protocol, as well as the possibility to tailor the sensitivity by enlarging the length of the DNA/miRNA heteroduplexes using additional probes and/or performing the labelling with ProtA conjugated with homopolymers prepared with different numbers of HRP molecules. The practical usefulness was demonstrated by determination of the endogenous levels of the mature target miRNA in 250 ng raw total RNA (RNAt extracted from human mammary epithelial normal (MCF-10A and cancer (MCF-7 cells and tumor tissues.

  6. Determination of oil reservoir radiotracer (S{sup 14}CN{sup -}) in a single step using a plastic scintillator extractive resin

    Energy Technology Data Exchange (ETDEWEB)

    Bagan, H.; Tarancon, A. [Departament de Quimica Analitica, Universitat de Barcelona, Diagonal 645, E-08028 Barcelona (Spain); Stavsetra, L. [Department for Reservoir and Exploration Technology, Institute for Energy Technology (IFE), Instituttveien 18, N-2027 Kjeller (Norway); Rauret, G. [Departament de Quimica Analitica, Universitat de Barcelona, Diagonal 645, E-08028 Barcelona (Spain); Garcia, J.F., E-mail: jfgarcia@ub.edu [Departament de Quimica Analitica, Universitat de Barcelona, Diagonal 645, E-08028 Barcelona (Spain)

    2012-07-29

    Highlights: Black-Right-Pointing-Pointer A new procedure for S{sup 14}CN{sup -} radiotracer determination using PS resin was established. Black-Right-Pointing-Pointer The minimum detectable activity for a 100 mL sample is 0.08 Bq L{sup -1}. Black-Right-Pointing-Pointer The minimum quantifiable activity for a 100 mL sample is 0.31 Bq L{sup -1}. Black-Right-Pointing-Pointer PS resin is capable to quantify S{sup 14}CN{sup -} radiotracer samples with errors lower than 5%. Black-Right-Pointing-Pointer PS resin is also capable to quantify complex matrices obtained from oil reservoirs. - Abstract: The analysis of radiotracers is important in the study of oil reservoir dynamics. One of the most widely used radiotracer is S{sup 14}CN{sup -}. Prior to activity measurements by Liquid Scintillation (LS), routine determinations require the pretreatment steps of purification and concentration of the samples using anion exchange columns. The final elution media produces samples with high salt concentration that may lead to problems with phase separation during the LS measurement. Plastic Scintillation (PS) is an alternative technique that provides a solid surface that can be used as a platform for the immobilisation of selective extractants to obtain a PS resin. The proposed procedure unifies chemical separation and sample measurement preparation in a single step, serving to reduce the number of reagents needed and manpower required for the analysis while also avoiding mixed waste production by LS. The objective of this study is to develop a PS resin for the determination of {sup 14}C-labelled thiocyanate radiotracer in water samples. For this purpose, the immobilisation procedure was optimised, including optimisation of the proportion of PS microspheres:extractant and the use of a control blank to monitor the PS resin immobilisation process. The breakthrough volume was studied and the detection and quantification limits for 100 mL of sample were determined to be 0.08 Bq L{sup -1

  7. A Single-step Process to Convert Karanja Oil to Fatty Acid Methyl Esters Using Amberlyst15 as a Catalyst

    Directory of Open Access Journals (Sweden)

    Arun K. Gupta

    2018-03-01

    Full Text Available Karanja oil was successfully converted to fatty acid methyl esters (FAME in a single- step process using Amberlyst15 as a catalyst. A methanol to oil ratio of 6 was required to retain the physical structure of the Amberlyst15 catalyst. At higher methanol to oil ratios, the Amberlyst15 catalyst disintegrated. Disintegration of Amberlyst15 caused an irreversible loss in catalytic activity. This loss in activity was due to a decrease in surface area of Amberlyst15, which was caused by a decrease in its mesoporous volume. It appeared that the chemical nature of Amberlyst15 was unaffected. Reuse of Amberlyst15 with a methanol to oil ratio of 6:1 also revealed a loss in FAME yield. However, this loss in activity was recovered by heating the used Amberlyst15 catalyst to 393 K. The kinetic parameters of a power law model were successfully determined for a methanol to oil ratio of 6:1. An activation energy of 54.9 kJ mol–1 was obtained.

  8. Single step modified ink staining for Tzanck test: quick detection of herpetic giant cells in Tzanck smear.

    Science.gov (United States)

    Mizutani, Hitoshi; Akeda, Tomoko; Yamanaka, Kei-Ichi; Isoda, Kenichi; Gabazza, Esteban C

    2012-02-01

    Tzanck test has been recently re-evaluated as a method for the diagnosis of herpes virus infection. Giemsa staining for the Tzanck test is time-consuming and laborious. There is a need to develop simple and quick staining methods for bedside diagnosis of this disease. We report a single step and quick method for staining herpes giant cells in Tzanck smears using routinely available inks and physiological saline. A keratinocyte cell line (HaCaT) was cultured on a slide glass and stained with various commercially available blue, blue-black and black inks serially diluted with physiological saline. Clinical smear samples from herpes lesions were also stained with these solutions without specific pretreatment. The nuclei of HaCaT were clearly stained showing high contrast with the cytoplasm using 5% Parker-Quink blue-black ink saline solution. Concentration of ink solution higher or lower than 5% resulted in less contrast. Blue or black inks or other manufacturers' inks can also be used, but staining of the cultured keratinocytes was less clear. Smear of clinical samples from herpes lesions were also stained with 5% ink solution. The nuclei of the multinucleated giant cells were clearly stained, and the sample could be immediately used for microscopic examination. One step staining of Tzanck smear using this diluted ink solution is an inexpensive and a convenient bedside diagnostic tool for the dermatologist. © 2011 Japanese Dermatological Association.

  9. Molecular Doping of the Hole-Transporting Layer for Efficient, Single-Step Deposited Colloidal Quantum Dot Photovoltaics

    KAUST Repository

    Kirmani, Ahmad R.

    2017-07-31

    Employment of thin perovskite shells and metal halides as surface-passivants for colloidal quantum dots (CQDs) have been important, recent developments in CQD optoelectronics. These have opened the route to single-step deposited high-performing CQD solar cells. These promising architectures employ a QD hole-transporting layer (HTL) whose intrinsically shallow Fermi level (EF) restricts band-bending at maximum power-point during solar cell operation limiting charge collection. Here, we demonstrate a generalized approach to effectively balance band-edge energy levels of the main CQD absorber and charge-transport layer for these high-performance solar cells. Briefly soaking the QD HTL in a solution of the metal-organic p-dopant, molybdenum tris(1-(trifluoroacetyl)-2-(trifluoromethyl)ethane-1,2-dithiolene), effectively deepens its Fermi level, resulting in enhanced band bending at the HTL:absorber junction. This blocks the back-flow of photo-generated electrons, leading to enhanced photocurrent and fill factor compared to undoped devices. We demonstrate 9.0% perovskite-shelled and 9.5% metal-halide-passivated CQD solar cells, both achieving ca. 10% relative enhancements over undoped baselines.

  10. A single step solid-phase extraction method for complete separation of sterol oxidation products in food lipids.

    Science.gov (United States)

    Azadmard-Damirchi, Sodeif; Dutta, Paresh C

    2009-01-02

    One of the crucial steps in determination of sterol oxidation products (SOPs) in foods is their enrichment and purifications by various preparative methods for further analysis by GC and GC-MS. Among the preparative methods, SPE of various adsorbents and solvent systems, are being used most widely. At present, no single step SPE method is suitable to completely separate the SOPs. In this study, a SPE (1g silica) method, suitable for both transesterified and cold saponified oil samples, was developed to separate completely SOPs from other lipid components. This method resulted in high recovery from rapeseed oil of added 5beta,6beta-epoxycholestan-3beta-ol (94-96%), cholest-5-en-3beta-ol-7-one(94%), cholestane-3beta,5alpha,6beta-triol (88-91%), cholest-5-en-3beta,7alpha-diol and 5alpha,6alpha-epoxycholestan-3beta-ol (88-90%). The method has a high sample capacity of up to 1g transesterified or cold-saponified oil sample. The method was tested and applied to different vegetable oils and to monitor the effects of refining processes on POPs in hazelnut oil.

  11. Single-step multiplex RT-PCR for simultaneous and colourimetric detection of six RNA viruses in olive trees.

    Science.gov (United States)

    Bertolini, E; Olmos, A; Martínez, M C; Gorris, M T; Cambra, M

    2001-07-01

    A single-step multiplex RT-PCR was developed for the simultaneous and colourimetric detection of six RNA viruses (Cucumber mosaic virus, Cherry leaf roll virus, strawberry latent ringspot virus, Arabis mosaic virus, Olive latent-1 virus and Olive latent-2 virus) which infect olive trees. Six compatible primer set for one-step RT-PCR amplification in a single closed-tube and 3' digoxigenin labelled probes were designed in optimal, specific and conserved regions. The method has been assessed with 195 Spanish field olive trees, suggesting that approximately 1.5% of the tested material was infected by Cucumber mosaic virus and 0.5% by Cherry leaf roll virus. This method saves time and reagent costs compared with monospecific RT-PCR which needs several reactions for the same number of tests. Using colourimetric detection, it is possible to analyse many samples, it increases sensitivity 10-fold, and whilst facilitating the interpretation of results, it avoids the use of gels and the toxic ethidium bromide. The method could be used routinely for sanitary and certification programmes.

  12. Single step sequential polydimethylsiloxane wet etching to fabricate a microfluidic channel with various cross-sectional geometries

    Science.gov (United States)

    Wang, C.-K.; Liao, W.-H.; Wu, H.-M.; Lo, Y.-H.; Lin, T.-R.; Tung, Y.-C.

    2017-11-01

    Polydimethylsiloxane (PDMS) has become a widely used material to construct microfluidic devices for various biomedical and chemical applications due to its desirable material properties and manufacturability. PDMS microfluidic devices are usually fabricated using soft lithography replica molding methods with master molds made of photolithogrpahy patterned photoresist layers on silicon wafers. The fabricated microfluidic channels often have rectangular cross-sectional geometries with single or multiple heights. In this paper, we develop a single step sequential PDMS wet etching process that can be used to fabricate microfluidic channels with various cross-sectional geometries from single-layer PDMS microfluidic channels. The cross-sections of the fabricated channel can be non-rectangular, and varied along the flow direction. Furthermore, the fabricated cross-sectional geometries can be numerically simulated beforehand. In the experiments, we fabricate microfluidic channels with various cross-sectional geometries using the developed technique. In addition, we fabricate a microfluidic mixer with alternative mirrored cross-sectional geometries along the flow direction to demonstrate the practical usage of the developed technique.

  13. Three-year clinical evaluation of posterior composite restorations placed with a single-step self-etch adhesive.

    Science.gov (United States)

    Kurokawa, Hiroyasu; Takamizawa, Toshiki; Rikuta, Akitomo; Tsubota, Keishi; Miyazaki, Masashi

    2015-06-01

    In this clinical study, we evaluated the 3-year clinical performance of a resin composite containing a surface-prereacted glass ionomer (S-PRG) filler (Beautifil II; Shofu Inc., Kyoto, Japan) placed with a single-step self-etch adhesive (BeautiBond; Shofu Inc.) in posterior restorations. Using modified US Public Health Service criteria, two experienced investigators performed clinical evaluations at the baseline, 6 months, 18 months, and 3 years. Color match, marginal adaptation, anatomical form, surface roughness, marginal discoloration, postoperative sensitivity, and secondary caries were evaluated. After 3 years, 26 patients attended the recall and 31 restorations were evaluated. No postoperative sensitivity or secondary caries was observed at any time point, and no restorations failed during the follow-up period. However, surface roughness, marginal adaptation, and marginal discoloration showed deterioration after 3 years. In conclusion, although some clinical changes were observed, resin composite containing S-PRG filler placed with self-etch adhesive exhibited acceptable clinical behavior in posterior restorations.

  14. Single-Step Seeded-Growth of Graphene Nanoribbons (GNRs) via Plasma-Enhanced Chemical Vapor Deposition (PECVD)

    Science.gov (United States)

    Hsu, C.-C.; Yang, K.; Tseng, W.-S.; Li, Yiliang; Li, Yilun; Tour, J. M.; Yeh, N.-C.

    One of the main challenges in the fabrication of GNRs is achieving large-scale low-cost production with high quality. Current techniques, including lithography and unzipped carbon nanotubes, are not suitable for mass production. We have recently developed a single-step PECVD growth process of high-quality graphene sheets without any active heating. By adding some substituted aromatic as seeding molecules, we are able to rapidly grow GNRs vertically on various transition-metal substrates. The morphology and electrical properties of the GNRs are dependent on the growth parameters such as the growth time, gas flow and species of the seeding molecules. On the other hand, all GNRs exhibit strong infrared and optical absorption. From studies of the Raman spectra, scanning electron microscopic images, and x-ray/ultraviolet photoelectron spectra of these GNRs as functions of the growth parameters, we propose a model for the growth mechanism. Our findings suggest that our approach opens up a pathway to large-scale, inexpensive production of GNRs for applications to supercapacitors and solar cells. This work was supported by the Grubstake Award and NSF through IQIM at Caltech.

  15. Fire-through Ag contact formation for crystalline Si solar cells using single-step inkjet printing.

    Science.gov (United States)

    Kim, Hyun-Gang; Cho, Sung-Bin; Chung, Bo-Mook; Huh, Joo-Youl; Yoon, Sam S

    2012-04-01

    Inkjet-printed Ag metallization is a promising method of forming front-side contacts on Si solar cells due to its non-contact printing nature and fine grid resolution. However, conventional Ag inks are unable to punch through the SiN(x) anti-reflection coating (ARC) layer on emitter Si surfaces. In this study, a novel formulation of Ag ink is examined for the formation of fire-through contacts on a SiN(x)-coated Si substrate using the single-step printing of Ag ink, followed by rapid thermal annealing at 800 degrees C. In order to formulate Ag inks with fire-through contact formation capabilities, a liquid etching agent was first formulated by dissolving metal nitrates in an organic solvent and then mixing the resulting solution with a commercial Ag nanoparticle ink at various volume ratios. During the firing process, the dissolved metal nitrates decomposed into metal oxides and acted in a similar manner to the glass frit contained in Ag pastes for screen-printed Ag metallization. The newly formulated ink with a 1 wt% loading ratio of metal oxides to Ag formed finely distributed Ag crystallites on the Si substrate after firing at 800 degrees C for 1 min.

  16. Single step method to fabricate durable superliquiphobic coating on aluminum surface with self-cleaning and anti-fogging properties.

    Science.gov (United States)

    Nanda, D; Varshney, P; Satapathy, M; Mohapatra, S S; Bhushan, B; Kumar, A

    2017-12-01

    The development of self-cleaning and anti-fogging durable superliquiphobic coatings for aluminum surfaces has raised tremendous interest in materials science. In this study, a superliquiphobic coating is fabricated on an aluminum surface by a single-step dip-coating method using 1H,1H,2H,2H-Perfluorooctyltrichlorosilane-modified SiO 2 nanoparticles. The successful implementation of the aforesaid coating in different applications requires extensive investigations of its characteristics and stability. To understand the properties of the coating, surface morphology, contact angle, self-cleaning, anti-fogging, and water repellency were investigated under perturbation conditions. Additionally, the dynamics of water and oil on the coated sample also were studied. Furthermore, the durability of the coating also was examined by performing thermal, chemical, and mechanical stability tests. It was found that the coating is superliquiphobic for water, ethylene glycol, glycerol and hexadecane, and shows thermal, chemical, and mechanical stability. Further, it exhibits self-cleaning and anti-fogging properties. This approach can be applied to any size and shape aluminum surface; thus, it has great industrial applications. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. A novel multimodal chromatography based single step purification process for efficient manufacturing of an E. coli based biotherapeutic protein product.

    Science.gov (United States)

    Bhambure, Rahul; Gupta, Darpan; Rathore, Anurag S

    2013-11-01

    Methionine oxidized, reduced and fMet forms of a native recombinant protein product are often the critical product variants which are associated with proteins expressed as bacterial inclusion bodies in E. coli. Such product variants differ from native protein in their structural and functional aspects, and may lead to loss of biological activity and immunogenic response in patients. This investigation focuses on evaluation of multimodal chromatography for selective removal of these product variants using recombinant human granulocyte colony stimulating factor (GCSF) as the model protein. Unique selectivity in separation of closely related product variants was obtained using combined pH and salt based elution gradients in hydrophobic charge induction chromatography. Simultaneous removal of process related impurities was also achieved in flow-through leading to single step purification process for the GCSF. Results indicate that the product recovery of up to 90.0% can be obtained with purity levels of greater than 99.0%. Binding the target protein at pH

  18. A convenient procedure for the synthesis of 3{beta}-hydroxy-6-oxo-5{alpha}-steroids. Application to the synthesis of laxogenin

    Energy Technology Data Exchange (ETDEWEB)

    Iglesias-Arteaga, Martin A. [Universidad Nacional Autonoma de Mexico, Mexico D.F. (Mexico). Facultad de Quimica Dept. de Quimica Organica]. E-mail: martin.iglesias@servidor.unam.mx; Simuta-Lopez, Eva M.; Xochihua-Moreno, Sergio; Vinas-Bravo, Omar; Smith, Sara Montiel; Meza Reyes, Socorro; Sandoval-Ramirez, Jesus [Benemerita Universidad Autonoma de Puebla, Pue., (Mexico). Facultad de Ciencias Quimicas]. E-mail: jsandova@siu.buap.mx

    2005-05-15

    A convenient pathway to obtain 3{beta}-hydroxy-6-oxo-5{alpha}-steroids from 3{beta}-acetoxy {delta}5-steroids is reported; the methodology was applied to the synthesis of laxogenin (7), substance that behaves as a plant growth hormone. This is an alternative way to produce an important functionality found in many examples of naturally occurring steroids. The developed procedure uses inexpensive reagents and can be carried out in four steps. The oxidizing and acidic steps used in this methodology did not affect the labile spiroketal side chain present in diosgenin (16). (author)

  19. Optimization of synthesis and quality control procedures for the preparation of 18F-labelled peptides

    International Nuclear Information System (INIS)

    Amartey, J.K.

    2002-01-01

    human cancer cell line in a dose dependent manner as expected. The biodistribution showed that the [ 18 F]-RC-160 bound to tumour xenograft in nude mice. The main objective of the project was to optimize reaction conditions and quality control procedures for prosthetic labelling of peptides. Hence the aims of the project were to: improve fluorination of prosthetic group such as fluorobenzoate, synthesis and isolation of the succinimidyl activated ester of the prosthetic group and reaction conditions to couple the activated ester to a model chemotactic peptide, and to develop an isolation method for the peptide conjugate; perform in vitro and in vivo experiments to ascertain the biological activity of the conjugate; apply the methods and techniques developed to label another biologically active peptide and evaluate its potential application as a cancer detection agent. (author)

  20. A new and efficient procedure for the synthesis of hexahydropyrimidine-fused 1,4-naphthoquinones

    Directory of Open Access Journals (Sweden)

    Marcelo Isidoro P. Reis

    2015-07-01

    Full Text Available A new and efficient method for the synthesis of hexahydropyrimidine-fused 1,4-naphthoquinones in one step with high yields from the reaction of lawsone with 1,3,5-triazinanes was developed.

  1. Single-step growth of InP/InGaAsP buried stripe MQW lasers on structured InP substrate

    Energy Technology Data Exchange (ETDEWEB)

    Rakovics, V.; Nagy, G.; Koltai, F.; Puespoeki, S.; Serenyi, M. [Hungarian Academy of Sciences, Budapest (Hungary). Research Inst. for Technical Physics; Frigeri, C.; Longo, F. [CNR MASPEC, Parma (Italy)

    1996-12-31

    Single-step LPE growth of DH lasers for 1.1--1.6 {micro}m wavelength range, and MQW lasers for 1.5--1.55 {micro}m have been demonstrated. The separate confinement bulk lasers have similar characteristics to 3QW with similar active layer volume, and both type lasers are better than the DH lasers for the same wavelength. These results indicate, that computer controlled low temperature, single-step LPE growth can be used for preparing low cost MQW devices.

  2. Single-step antibody-based affinity cryo-electron microscopy for imaging and structural analysis of macromolecular assemblies.

    Science.gov (United States)

    Yu, Guimei; Vago, Frank; Zhang, Dongsheng; Snyder, Jonathan E; Yan, Rui; Zhang, Ci; Benjamin, Christopher; Jiang, Xi; Kuhn, Richard J; Serwer, Philip; Thompson, David H; Jiang, Wen

    2014-07-01

    Single particle cryo-electron microscopy (cryo-EM) is an emerging powerful tool for structural studies of macromolecular assemblies (i.e., protein complexes and viruses). Although single particle cryo-EM requires less concentrated and smaller amounts of samples than X-ray crystallography, it remains challenging to study specimens that are low-abundance, low-yield, or short-lived. The recent development of affinity grid techniques can potentially further extend single particle cryo-EM to these challenging samples by combining sample purification and cryo-EM grid preparation into a single step. Here we report a new design of affinity cryo-EM approach, cryo-SPIEM, that applies a traditional pathogen diagnosis tool Solid Phase Immune Electron Microscopy (SPIEM) to the single particle cryo-EM method. This approach provides an alternative, largely simplified and easier to use affinity grid that directly works with most native macromolecular complexes with established antibodies, and enables cryo-EM studies of native samples directly from cell cultures. In the present work, we extensively tested the feasibility of cryo-SPIEM with multiple samples including those of high or low molecular weight, macromolecules with low or high symmetry, His-tagged or native particles, and high- or low-yield macromolecules. Results for all these samples (non-purified His-tagged bacteriophage T7, His-tagged Escherichiacoli ribosomes, native Sindbis virus, and purified but low-concentration native Tulane virus) demonstrated the capability of cryo-SPIEM approach in specifically trapping and concentrating target particles on TEM grids with minimal view constraints for cryo-EM imaging and determination of 3D structures. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. A novel single-step GC-MS/MS method for cannabinoids and 11-OH-THC metabolite analysis in hair.

    Science.gov (United States)

    Angeli, Ilaria; Casati, Sara; Ravelli, Alessandro; Minoli, Mauro; Orioli, Marica

    2018-03-16

    THC, CBD, CBN, THC-COOH and 11-OH-THC are the most popular markers of cannabis consumption and abuse. The use of this drug is a serious social problem worldwide. In this study, a method based on gas chromatography-tandem mass spectrometry (GC-MS/MS) operated in electron ionization (EI) with simple and rapid liquid-liquid extraction (LLE) and derivatization was developed and validated for the simultaneous determination of THC, CBD, CBN and 11-OH-THC in hair samples. The detection of all compounds was based on multiple reaction monitoring (MRM) transitions. The most important advantage of this method is the single-step, quick, easy and effective sample extraction procedure for THC, CBD, CBN and 11-OH-THC. The method showed a good linearity with a correlation coefficient (r 2 ) between 0.997 and 0.999 for all substances. The variation coefficient (%CV) was <5% for THC, 11-OH-THC and CBD and <13% for CBN. The limit of detection (LOD) was 0.03 pg/mg for 11-OH-THC and it ranged from 0.3 to 1.4 pg/mg for THC, CBD and CBN. The limit of quantification was 0.1 pg/mg for 11-OH-THC and it ranged from 0.9 to 4.7 pg/mg for THC, CBD and CBN. Analytical recovery was higher than 88% for 11-OH-THC and it ranged between 68 and 97% for THC, CBD and CBN. Intra- and inter-assay precision and accuracy were always lower than 9-14% and 5-9%, respectively. In parallel, we have quantified the THC-COOH level, following the methods previously set-up by us. The whole procedure was successfully applied to more than 200 different hair samples from cannabis consumers, disclosing the presence of 11-OH-THC in a range between 0.2 pg/mg and 27 pg/mg, and the presence of THC-COOH in a range between 0.05 pg/mg and 42.05 pg/mg. These data provided a good start towards the use of 11-THC-OH as alternative hair biomarker of cannabis consumption. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. A convenient procedure for the solid-phase synthesis of hydroxamic acids on PEGA resins

    DEFF Research Database (Denmark)

    Nandurkar, Nitin Subhash; Petersen, Rico; Qvortrup, Katrine

    2011-01-01

    An efficient method for the solid-phase synthesis of hydroxamic acids is described. The method comprises the nucleophilic displacement of esters immobilized on PEGA resins with hydroxylamine/sodium hydroxide in isopropanol. The hydroxyaminolysis protocol is compatible with a broad range of PEGA...

  5. A convenient procedure for the synthesis of allyl and benzyl ethers ...

    Indian Academy of Sciences (India)

    Unknown

    Allyl and benzyl groups are commonly employed for the protection of alcohol and phenol moieties for ease of synthesis and convenient deprotection. Allyl and benzyl ethers are also intermediates in sigmatropic rearrangement reactions such as the Claisen and the. Cope rearrangements. Allyl ethers can be prepared from ...

  6. Feedback for Simulation-Based Procedural Skills Training: A Meta-Analysis and Critical Narrative Synthesis

    Science.gov (United States)

    Hatala, Rose; Cook, David A.; Zendejas, Benjamin; Hamstra, Stanley J.; Brydges, Ryan

    2014-01-01

    Although feedback has been identified as a key instructional feature in simulation based medical education (SBME), we remain uncertain as to the magnitude of its effectiveness and the mechanisms by which it may be effective. We employed a meta-analysis and critical narrative synthesis to examine the effectiveness of feedback for SBME procedural…

  7. Simple enzymatic procedure for l‐carnosine synthesis: whole‐cell biocatalysis and efficient biocatalyst recycling

    Science.gov (United States)

    Heyland, Jan; Antweiler, Nicolai; Lutz, Jochen; Heck, Tobias; Geueke, Birgit; Kohler, Hans‐Peter E.; Blank, Lars M.; Schmid, Andreas

    2010-01-01

    Summary β‐Peptides and their derivates are usually stable to proteolysis and have an increased half‐life compared with α‐peptides. Recently, β‐aminopeptidases were described as a new enzyme class that enabled the enzymatic degradation and formation of β‐peptides. As an alternative to the existing chemical synthesis routes, the aim of the present work was to develop a whole‐cell biocatalyst for the synthesis and production of β‐peptides using this enzymatic activity. For the optimization of the reaction system we chose the commercially relevant β,α‐dipeptide l‐carnosine (β‐alanine‐l‐histidine) as model product. We were able to show that different recombinant yeast and bacteria strains, which overexpress a β‐peptidase, could be used directly as whole‐cell biocatalysts for the synthesis of l‐carnosine. By optimizing relevant reaction conditions for the best‐performing recombinant Escherichia coli strain, such as pH and substrate concentrations, we obtained high l‐carnosine yields of up to 71%. Long‐time as well as biocatalyst recycling experiments indicated a high stability of the developed biocatalyst for at least five repeated batches. Application of the recombinant E. coli in a fed‐batch process enabled the accumulation of l‐carnosine to a concentration of 3.7 g l−1. PMID:21255308

  8. Latarjet, Bristow, and Eden-Hybinette procedures for anterior shoulder dislocation: systematic review and quantitative synthesis of the literature.

    Science.gov (United States)

    Longo, Umile Giuseppe; Loppini, Mattia; Rizzello, Giacomo; Ciuffreda, Mauro; Maffulli, Nicola; Denaro, Vincenzo

    2014-09-01

    The aim of this study was to evaluate clinical outcome, rate of recurrence, complications, and rate of postoperative osteoarthritis in patients with anterior shoulder instability managed with Latarjet, Bristow, or Eden-Hybinette procedures. A systematic review of the literature on management of anterior dislocation of the shoulder with glenoid bony procedures was performed. A comprehensive search of PubMed, MEDLINE, CINAHL, Cochrane, EMBASE, and Google Scholar databases using various combinations of the keywords "shoulder," "dislocation," "treatment," "Latarjet," "Bristow," "bone loss," "Eden-Hybinette," "iliac," "bone," "block," "clinical," "outcome," and "Bankart." The following data were extracted: demographics, bone defects and other lesions, type of surgery, outcome measurement, range of motion (ROM), recurrence of instability, complications, and osteoarthritis. A quantitative synthesis of all comparative studies was performed to compare bone block procedures and Bankart repair in terms of postoperative recurrence of instability and osteoarthritis. Forty-six studies were included and 3,211 shoulders were evaluated. The mean value of the Coleman Methodology Score (CMS) was 65 points. Preoperatively, the injuries detected most were glenoid bone loss and Bankart lesions. The Eden-Hybinette procedure had the highest rate of postoperative osteoarthritis and recurrence. Pooled results from comparative studies showed that the bone block procedures were associated with a lower rate of recurrence when compared with Bankart repair (odds ratio [OR], 0.45; 95% confidence interval [CI], 0.28 to 0.74; P = .002), whereas there was no significant difference between the 2 groups in terms of postoperative osteoarthritis (P = .79). The open Bristow-Latarjet procedure continues to be a valid surgical option to treat patients with anterior shoulder instability. Bone block procedures were associated with a lower rate of recurrence when compared with the Bankart repair. The Eden

  9. Genome-wide association mapping including phenotypes from relatives without genotypes in a single-step (ssGWAS for 6-week body weight in broiler chickens

    Directory of Open Access Journals (Sweden)

    Huiyu eWang

    2014-05-01

    Full Text Available The purpose of this study was to compare results obtained from various methodologies for genome-wide association studies, when applied to real data, in terms of number and commonality of regions identified and their genetic variance explained, computational speed, and possible pitfalls in interpretations of results. Methodologies include: two iteratively reweighted single-step genomic BLUP procedures (ssGWAS1 and ssGWAS2, a single-marker model (CGWAS, and BayesB. The ssGWAS methods utilize genomic breeding values (GEBVs based on combined pedigree, genomic and phenotypic information, while CGWAS and BayesB only utilize phenotypes from genotyped animals or pseudo-phenotypes. In this study, ssGWAS was performed by converting GEBVs to SNP marker effects. Unequal variances for markers were incorporated for calculating weights into a new genomic relationship matrix. SNP weights were refined iteratively. The data was body weight at 6 weeks on 274,776 broiler chickens, of which 4553 were genotyped using a 60k SNP chip. Comparison of genomic regions was based on genetic variances explained by local SNP regions (20 SNPs. After 3 iterations, the noise was greatly reduced of ssGWAS1 and results are similar to that of CGWAS, with 4 out of the top 10 regions in common. In contrast, for BayesB, the plot was dominated by a single region explaining 23.1% of the genetic variance. This same region was found by ssGWAS1 with the same rank, but the amount of genetic variation attributed to the region was only 3%. These finding emphasize the need for caution when comparing and interpreting results from various methods, and highlight that detected associations, and strength of association, strongly depends on methodologies and details of implementations. BayesB appears to overly shrink regions to zero, while overestimating the amount of genetic variation attributed to the remaining SNP effects. The real world is most likely a compromise between methods and remains to

  10. Nanostructured Graphene-Titanium Dioxide Composites Synthesized by a Single-Step Aerosol Process for Photoreduction of Carbon Dioxide.

    Science.gov (United States)

    Wang, Wei-Ning; Jiang, Yi; Fortner, John D; Biswas, Pratim

    2014-07-01

    Photocatalytic reduction of carbon dioxide (CO 2 ) to hydrocarbons by using nanostructured materials activated by solar energy is a promising approach to recycling CO 2 as a fuel feedstock. CO 2 photoreduction, however, suffers from low efficiency mainly due to the inherent drawback of fast electron-hole recombination in photocatalysts. This work reports the synthesis of nanostructured composites of titania (TiO 2 ) nanoparticles (NPs) encapsulated by reduced graphene oxide (rGO) nanosheets via an aerosol approach. The role of synthesis temperature and TiO 2 /GO ratio in CO 2 photoreduction was investigated. As-prepared nanocomposites demonstrated enhanced CO 2 conversion performance as compared with that of pristine TiO 2 NPs due to the strong electron trapping capability of the rGO nanosheets.

  11. Low temperature synthesis and sintering behaviour of Gd-doped ceria nanosized powders: comparison between two synthesis procedures

    Directory of Open Access Journals (Sweden)

    Tartaj, J.

    2009-04-01

    Full Text Available Two different routes of synthesis of Ce0.9Gd0.1O1.95 (CGO nanopowders are presented; the ethylene glycol-metal nitrate polymerized complex solution method and the precipitation technique using ammonia as the precipitant agent. The powders characteristics were examined by X-ray diffraction (XRD, transmission electron microscopy (TEM, Brunauer-Emmett-Teller (BET surface area and simultaneous thermogravimetric and differential thermal analysis (TG/DTA. Scanning electron microscopy (SEM observations were used to determine the agglomeration degree of the powders, and the uniformity of the green compacts. The Hg-porosimetry results were used to investigate the pore size. The densification process was studied by constant heating rate dilatometry and isothermal sintering at different temperatures. Microstructural development of each sample at different sintering temperatures and times was followed by SEM.

    Se presentan dos diferentes rutas de síntesis de nanopolvos de Ce0.9Gd0.1O1.95 (CGO: precipitación de hidróxidos, a partir de soluciones de nitratos utilizando amonia como agente precipitante y formación de complejos polimerizados etilene-glicol nitratos metálicos. Las características de los polvos se determinaron por DRX, microscopía de transmisión (TEM, superficie específica por Brunauer-Emmett-Teller (BET, y ensayos de ATD/ATG. El grado de aglomeración de los nanopolvos y la uniformidad de los compactos en verde se ha observado por Microscopía electrónica de barrido, (SEM. El tamaño de poro de los compactos en verde se ha medido mediante porosimetría de Hg. El comportamiento a la sinterización se ha evaluado por dilatometría a velocidad de calentamiento constante y por sinterización isoterma a diferentes temperaturas. La evolución microestructural se ha seguido por SEM.

  12. Mechanisms of adaptation from a multiple to a single step recovery strategy following repeated exposure to forward loss of balance in older adults.

    Directory of Open Access Journals (Sweden)

    Christopher P Carty

    Full Text Available When released from an initial, static, forward lean angle and instructed to recover with a single step, some older adults are able to meet the task requirements, whereas others either stumble or fall. The purpose of the present study was to use the concept of margin of stability (MoS to investigate balance recovery responses in the anterior-posterior direction exhibited by older single steppers, multiple steppers and those that are able to adapt from multiple to single steps following exposure to repeated forward loss of balance. One hundred and fifty-one healthy, community dwelling, older adults, aged 65-80 years, participated in the study. Participants performed four trials of the balance recovery task from each of three initial lean angles. Balance recovery responses in the anterior-posterior direction were quantified at three events; cable release (CR, toe-off (TO and foot contact (FC, for trials performed at the intermediate lean angle. MoS was computed as the anterior-posterior distance between the forward boundary of the Base of Support (BoS and the vertical projection of the velocity adjusted centre of mass position (XCoM. Approximately one-third of participants adapted from a multiple to a single step recovery strategy following repeated exposure to the task. MoS at FC for the single and multiple step trials in the adaptation group were intermediate between the exclusively single step group and the exclusively multiple step group, with the single step trials having a significant, 3.7 times higher MoS at FC than the multiple step trials. Consistent with differences between single and multiple steppers, adaptation from multiple to single steps was attributed to an increased BoS at FC, a reduced XCoM at FC and an increased rate of BoS displacement from TO to FC. Adaptations occurred within a single test session and suggest older adults that are close to the threshold of successful recovery can rapidly improve dynamic stability following

  13. Synthesis of quinoxaline 1,4-di-n-oxide derivatives on solid support using room temperature and microwave-assisted solvent-free procedures

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Caro, Lilia C.; Sanchez-Sanchez, Mario; Bocanegra-Garcia, Virgilio; Rivera, Gildardo [Universidad Autonoma de Tamaulipas, Reynosa (Mexico). Dept. de Farmacia y Quimica Medicinal; Monge, Antonio [Universidad de Navarra, Pamplona (Spain). Centro de Investigacion en Farmacobiologia Aplicada. Unidad de Investigacion y Desarrollo de Medicamentos

    2011-07-01

    We describe the synthesis of 12 new ethyl and methyl quinoxaline-7-carboxylate 1,4-di-N-oxide derivatives on solid supports with room temperature and microwave-assisted solvent-free procedures. Results show that solid supports have good catalytic activity in the formation of quinoxaline 1,4-di-N-oxide derivatives. We found that florisil and montmorillonite KSF and K10 could be used as new, easily available, inexpensive alternatives of catalysts. Additionally, room temperature and microwave-irradiation solvent-free synthesis was more efficient than a conventional procedure (Beirut reaction), reducing reaction time and increasing yield. (author)

  14. Influence of light intensity on surface-free energy and dentin bond strength of single-step self-etch adhesives.

    Science.gov (United States)

    Nojiri, Kie; Tsujimoto, Akimasa; Suzuki, Takayuki; Shibasaki, Syo; Matsuyoshi, Saki; Takamizawa, Toshiki; Miyazaki, Masashi

    2015-01-01

    In this study, we investigated the influence of light intensity on the surface-free energy and dentin bond strength of single-step selfetch adhesives. The adhesives were applied to the dentin surfaces of bovine mandibular incisors and cured with light intensities of 0 (no irradiation), 200, 400, and 600 mW/cm(2). Surface-free energies were determined by measuring the contact angles of three test liquids placed on the cured adhesives. Dentin bond strengths of the specimens were also measured. Polymerization with a higher light intensity resulted in a lower surface-free energy of the cured adhesives. The greatest bond strength was achieved when a light intensity of 400 mW/cm(2) or greater was used. Our data suggest that the surface-free energy and dentin bond strength of single-step self-etch adhesives are affected by light intensity of the curing unit.

  15. Single-step immobilization of cell adhesive peptides on a variety of biomaterial substrates via tyrosine oxidation with copper catalyst and hydrogen peroxide.

    Science.gov (United States)

    Kakinoki, Sachiro; Yamaoka, Tetsuji

    2015-04-15

    Immobilization of biologically active peptides which were isolated from extracellular matrix proteins is a powerful strategy for the design and functionalization of biomaterial substrates. However, the method of peptide immobilization was restricted, that is, peptide is often immobilized through the reactive groups inherent in substrates with multistep reactions. Here, we report a single-step immobilization of fibronectin-derived cell adhesive peptide (Arg-Glu-Asp-Val; REDV) onto polymer materials by use of tyrosine oxidation with copper catalyst and hydrogen peroxide. REDV peptide was successfully immobilized on tissue culture polystyrene, poly(ethylene terephthalate), poly(vinyl chloride), expanded-poly(tetrafluoroethylene), and poly(l-lactic acid), resulting in enhanced adhesion of human umbilical vein endothelial cells. This method is a single-step reaction under very mild conditions and is available for the biological functionalization of various medical devices.

  16. Development of a method to extract and purify target compounds from medicinal plants in a single step: online hyphenation of expanded bed adsorption chromatography and countercurrent chromatography

    Science.gov (United States)

    Li, Yang; Wang, Nan; Zhang, Min; Ito, Yoichiro; Zhang, Hongyang; Wang, Yuerong; Guo, Xin; Hu, Ping

    2014-01-01

    Pure compounds extracted and purified from natural sources are crucial to lead discovery and drug screening. This study presents a novel two-dimensional hyphenation of expanded bed adsorption chromatography (EBAC) and high-speed countercurrent chromatography (HSCCC) for extraction and purification of target compounds from medicinal plants in a single step. The EBAC and HSCCC were hyphenated via a six-port injection valve as an interface. Fractionation of ingredients of Salvia miltiorrhiza and Rhizoma coptidis was performed on the hyphenated system to verify its efficacy. An amount each of 52.9 mg of salvianolic acid B and 2.1 mg of rosmarinic acid was obtained from Salvia miltiorrhiza by the two-dimensional system in a single step. The purities of the targets were over 96% of salvianolic acid B and 74% of rosmarinic acid. An amount each of 4.6 mg of coptisine and 4.1 mg of berberine was obtained from Rhizoma coptidis each with 98% and 82% purity, respectively. The processing time was nearly 50% that of the multi-step method. These results indicate that the present method is a rapid and green way to harvest targets from medicinal plants in a single step. PMID:24588208

  17. A novel single-step surgical technique for vestibular deepening using laser in conjunction with periodontal flap surgery

    Directory of Open Access Journals (Sweden)

    Ashu Bhardwaj

    2016-01-01

    Full Text Available Moderate-to-severe chronic periodontitis results in clinical loss of attachment, reduced width of attached gingiva (AG, periodontal pockets beyond mucogingival junction (MGJ, gingival recession, loss of alveolar bone, and decreased vestibular depth (VD. The encroachment of frenal and muscle attachments on marginal gingiva increases the rate of progression of periodontal pockets, prevents healing, and causes their recurrence after therapy. Loss of VD and AG associated with continuous progression of pocket formation and bone loss requires two-stage surgical procedures. In this article, one-stage surgical procedure is being described for the first time, to treat the periodontal pockets extending beyond the MGJ by periodontal flap surgery along with vestibular deepening with diode laser to increase the AG. One-step surgical technique is illustrated whereby pocket therapy with reconstruction of lost periodontal tissues can be done along with gingival augmentation by vestibular deepening.

  18. Synthesis of mono and multidomain YIG particles by chemical coprecipitation or ceramic procedure

    International Nuclear Information System (INIS)

    Fernandez-Garcia, L.; Suarez, M.; Menendez, J.L.

    2010-01-01

    Yttrium iron garnet powders have been synthesized by chemical coprecipitation using two different precursors, nitrates and chlorides, and by an oxides mixture route. It is shown that depending on the precursors and synthesis conditions used pure yttrium iron garnet powders can be obtained with a mono or multidomain magnetic behaviour. The yttrium iron garnet crystalline structure, as studied by Raman spectroscopy, was already formed after calcination at temperatures as low as 800 o C when the nitrate precursors were used. However, calcination temperatures of up to 1100 o C were required to obtain yttrium iron garnet powders when the precursors were chlorides or when the oxides mixture route was chosen. The saturation magnetization of the powders correlates well with the structural characterization: when nitrate precursors were used, the saturation magnetization was already close to the bulk value, 26.8 emu/cm 3 , after calcination at 800 o C. However, the saturation magnetization of the powders obtained by the chlorides and oxides mixture routes was close to zero up to calcination temperatures of 1100 o C. Finally, both the chlorides and the oxides mixture routes yield multidomain micron sized yttrium iron garnet powders, whereas the nitrates route led to monodomain submicron sized powders.

  19. Synthesis of mono and multidomain YIG particles by chemical coprecipitation or ceramic procedure

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Garcia, L. [Departamento de Materiales Nanoestructurados, Centro de Investigacion en Nanomateriales y Nanotecnologia (CINN), Principado de Asturias - Consejo superior de Investigaciones Cientificas (CSIC) - Universidad de Oviedo - UO, Parque Tecnologico de Asturias, 33428 Llanera, Asturias (Spain); Suarez, M., E-mail: m.suarez@cinn.e [Departamento de Materiales Nanoestructurados, Centro de Investigacion en Nanomateriales y Nanotecnologia (CINN), Principado de Asturias - Consejo superior de Investigaciones Cientificas (CSIC) - Universidad de Oviedo - UO, Parque Tecnologico de Asturias, 33428 Llanera, Asturias (Spain); Menendez, J.L. [Departamento de Materiales Nanoestructurados, Centro de Investigacion en Nanomateriales y Nanotecnologia (CINN), Principado de Asturias - Consejo superior de Investigaciones Cientificas (CSIC) - Universidad de Oviedo -UO, Parque Tecnologico de Asturias, 33428 Llanera, Asturias (Spain)

    2010-04-09

    Yttrium iron garnet powders have been synthesized by chemical coprecipitation using two different precursors, nitrates and chlorides, and by an oxides mixture route. It is shown that depending on the precursors and synthesis conditions used pure yttrium iron garnet powders can be obtained with a mono or multidomain magnetic behaviour. The yttrium iron garnet crystalline structure, as studied by Raman spectroscopy, was already formed after calcination at temperatures as low as 800 {sup o}C when the nitrate precursors were used. However, calcination temperatures of up to 1100 {sup o}C were required to obtain yttrium iron garnet powders when the precursors were chlorides or when the oxides mixture route was chosen. The saturation magnetization of the powders correlates well with the structural characterization: when nitrate precursors were used, the saturation magnetization was already close to the bulk value, 26.8 emu/cm{sup 3}, after calcination at 800 {sup o}C. However, the saturation magnetization of the powders obtained by the chlorides and oxides mixture routes was close to zero up to calcination temperatures of 1100 {sup o}C. Finally, both the chlorides and the oxides mixture routes yield multidomain micron sized yttrium iron garnet powders, whereas the nitrates route led to monodomain submicron sized powders.

  20. Synthesis of [{sup 123}I]IBZM: a reliable procedure for routine clinical studies

    Energy Technology Data Exchange (ETDEWEB)

    Zea-Ponce, Yolanda E-mail: yolanda@neuron.cpmc.columbia.edu; Laruelle, Marc

    1999-08-01

    The single photon emission computed tomography (SPECT) D{sub 2}/D{sub 3} receptor radiotracer [{sup 123}I]IBZM, is prepared by electrophilic radioiodination of the precursor BZM with high-purity sodium [{sup 123}I]iodide in the presence of diluted peracetic acid. However, in our hands, the most commonly used procedure for this radiosynthesis produced variable and inconsistent labeling yields, to such extent that it became inappropriate for routine clinical studies. Our goal was to modify the labeling procedure, to obtain consistently better labeling and radiochemical yields. The best conditions found for the radioiodination were as follows: 50 {mu}g precursor in 50 {mu}L EtOH mixed with buffer pH 2; Na[{sup 123}I]I in 0.1 M NaOH (<180 {mu}L), 50 {mu}L peracetic acid diluted solution, heating at 65 deg. C for 14 min. Purification was achieved by solid phase extraction (SPE) and reverse-phase high performance liquid chromatography (HPLC). Under these conditions, labeling yield average was 76{+-}4% (n=31); radiochemical yield was 69{+-}4% and radiochemical purity was 98{+-}1%. With larger volumes of the Na[{sup 123}I]I solution the yields were consistent but lower. For example, for volumes between 417 and 523 {mu}L the labeling yield was 61{+-}5% (n=21), radiochemical yield was 56{+-} 5% and radiochemical purity was 98{+-}1%.

  1. The Effect of Phosphoric Acid Pre-etching Times on Bonding Performance and Surface Free Energy with Single-step Self-etch Adhesives.

    Science.gov (United States)

    Tsujimoto, A; Barkmeier, W W; Takamizawa, T; Latta, M A; Miyazaki, M

    2016-01-01

    The purpose of this study was to evaluate the effect of phosphoric acid pre-etching times on shear bond strength (SBS) and surface free energy (SFE) with single-step self-etch adhesives. The three single-step self-etch adhesives used were: 1) Scotchbond Universal Adhesive (3M ESPE), 2) Clearfil tri-S Bond (Kuraray Noritake Dental), and 3) G-Bond Plus (GC). Two no pre-etching groups, 1) untreated enamel and 2) enamel surfaces after ultrasonic cleaning with distilled water for 30 seconds to remove the smear layer, were prepared. There were four pre-etching groups: 1) enamel surfaces were pre-etched with phosphoric acid (Etchant, 3M ESPE) for 3 seconds, 2) enamel surfaces were pre-etched for 5 seconds, 3) enamel surfaces were pre-etched for 10 seconds, and 4) enamel surfaces were pre-etched for 15 seconds. Resin composite was bonded to the treated enamel surface to determine SBS. The SFEs of treated enamel surfaces were determined by measuring the contact angles of three test liquids. Scanning electron microscopy was used to examine the enamel surfaces and enamel-adhesive interface. The specimens with phosphoric acid pre-etching showed significantly higher SBS and SFEs than the specimens without phosphoric acid pre-etching regardless of the adhesive system used. SBS and SFEs did not increase for phosphoric acid pre-etching times over 3 seconds. There were no significant differences in SBS and SFEs between the specimens with and without a smear layer. The data suggest that phosphoric acid pre-etching of ground enamel improves the bonding performance of single-step self-etch adhesives, but these bonding properties do not increase for phosphoric acid pre-etching times over 3 seconds.

  2. High yield expression and single-step purification of Toxoplasma gondii SAG1, GRA1, and GRA7 antigens in Escherichia coli

    DEFF Research Database (Denmark)

    Hiszczynska-Sawicka, E.; Brillowska-Dabrowska, A.; Dabrowski, Slawomir

    2003-01-01

    This report describes a simple, highly efficient and reproducible method for obtaining large quantities of highly pure recombinant Toxoplasma gondii antigens, which can be used for diagnostic application. The obtained T gondii SAG1, GRA1, and GRA7 antigens (as fusion proteins), expressed...... in Escherichia coli, contained polyhistidine tags at the N- and C-ends that allowed single-step isolation by metal-affinity chromatography on Ni2+-IDA-Sepharose columns. The immunoreactivity of the recombinant antigens was tested in an enzyme-linked immunosorbent assay (ELISA) format for potential application...

  3. Detection of 22 common leukemic fusion genes using a single-step multiplex qRT-PCR-based assay.

    Science.gov (United States)

    Lyu, Xiaodong; Wang, Xianwei; Zhang, Lina; Chen, Zhenzhu; Zhao, Yu; Hu, Jieying; Fan, Ruihua; Song, Yongping

    2017-07-25

    Fusion genes generated from chromosomal translocation play an important role in hematological malignancies. Detection of fusion genes currently employ use of either conventional RT-PCR methods or fluorescent in situ hybridization (FISH), where both methods involve tedious methodologies and require prior characterization of chromosomal translocation events as determined by cytogenetic analysis. In this study, we describe a real-time quantitative reverse transcription PCR (qRT-PCR)-based multi-fusion gene screening method with the capacity to detect 22 fusion genes commonly found in leukemia. This method does not require pre-characterization of gene translocation events, thereby facilitating immediate diagnosis and therapeutic management. We performed fluorescent qRT-PCR (F-qRT-PCR) using a commercially-available multi-fusion gene detection kit on a patient cohort of 345 individuals comprising 108 cases diagnosed with acute myeloid leukemia (AML) for initial evaluation; remaining patients within the cohort were assayed for confirmatory diagnosis. Results obtained by F-qRT-PCR were compared alongside patient analysis by cytogenetic characterization. Gene translocations detected by F-qRT-PCR in AML cases were diagnosed in 69.4% of the patient cohort, which was comparatively similar to 68.5% as diagnosed by cytogenetic analysis, thereby demonstrating 99.1% concordance. Overall gene fusion was detected in 53.7% of the overall patient population by F-qRT-PCR, 52.9% by cytogenetic prediction in leukemia, and 9.1% in non-leukemia patients by both methods. The overall concordance rate was calculated to be 99.0%. Fusion genes were detected by F-qRT-PCR in 97.3% of patients with CML, followed by 69.4% with AML, 33.3% with acute lymphoblastic leukemia (ALL), 9.1% with myelodysplastic syndromes (MDS), and 0% with chronic lymphocytic leukemia (CLL). We describe the use of a F-qRT-PCR-based multi-fusion gene screening method as an efficient one-step diagnostic procedure as an

  4. Single-step direct fabrication of pillar-on-pore hybrid nanostructures in anodizing aluminum for superior superhydrophobic efficiency.

    Science.gov (United States)

    Jeong, Chanyoung; Choi, Chang-Hwan

    2012-02-01

    Conventional electrochemical anodizing processes of metals such as aluminum typically produce planar and homogeneous nanopore structures. If hydrophobically treated, such 2D planar and interconnected pore structures typically result in lower contact angle and larger contact angle hysteresis than 3D disconnected pillar structures and, hence, exhibit inferior superhydrophobic efficiency. In this study, we demonstrate for the first time that the anodizing parameters can be engineered to design novel pillar-on-pore (POP) hybrid nanostructures directly in a simple one-step fabrication process so that superior surface superhydrophobicity can also be realized effectively from the electrochemical anodization process. On the basis of the characteristic of forming a self-ordered porous morphology in a hexagonal array, the modulation of anodizing voltage and duration enabled the formulation of the hybrid-type nanostructures having controlled pillar morphology on top of a porous layer in both mild and hard anodization modes. The hybrid nanostructures of the anodized metal oxide layer initially enhanced the surface hydrophilicity significantly (i.e., superhydrophilic). However, after a hydrophobic monolayer coating, such hybrid nanostructures then showed superior superhydrophobic nonwetting properties not attainable by the plain nanoporous surfaces produced by conventional anodization conditions. The well-regulated anodization process suggests that electrochemical anodizing can expand its usefulness and efficacy to render various metallic substrates with great superhydrophilicity or -hydrophobicity by directly realizing pillar-like structures on top of a self-ordered nanoporous array through a simple one-step fabrication procedure.

  5. Single step synthesis of gold-amino acid composite, with the evidence of the catalytic hydrogen atom transfer (HAT) reaction, for the electrochemical recognition of Serotonin

    Science.gov (United States)

    Choudhary, Meenakshi; Siwal, Samarjeet; Nandi, Debkumar; Mallick, Kaushik

    2016-03-01

    A composite architecture of amino acid and gold nanoparticles has been synthesized using a generic route of 'in-situ polymerization and composite formation (IPCF)' [1,2]. The formation mechanism of the composite has been supported by a model hydrogen atom (H•≡H++e-) transfer (HAT) type of reaction which belongs to the proton coupled electron transfer (PCET) mechanism. The 'gold-amino acid composite' was used as a catalyst for the electrochemical recognition of Serotonin.

  6. Single step synthesis of chitin/chitosan-based graphene oxide–ZnO hybrid composites for better electrical conductivity and optical properties

    International Nuclear Information System (INIS)

    Anandhavelu, S.; Thambidurai, S.

    2013-01-01

    Highlights: ► UV absorption at 260–360 nm confirmed strong binding of ZnO with chitosan–GO sheets. ► Chitin-based GO–ZnO shows higher electrical conductivity than chitosan-based GO–ZnO. ► Chitin-based GO–ZnO will useful in sensing, catalysis and energy storage applications. -- Abstract: We synthesized two composites/hybrid composites with a graphene oxide (GO)/mixed GO–ZnO filler using either a chitin or a chitosan matrix. Fourier transform infrared spectroscopy analysis confirmed that chitin had been converted to chitosan during matrix fabrication because only chitosan, ZnO and GO were shown to be present in the composites/hybrid composites. Raman spectroscopy indicated the display of D and G bands at 1345 cm −1 and 1584 cm −1 , respectively. UV absorption peaks appeared at 260–360 nm and 201 nm in both hybrid composites, which indicate a strong binding of ZnO within the chitosan–GO sheets. High resolution scanning electron microscopy and atomic force microscopy studies demonstrated that on a molecular scale ZnO was well dispersed in the hybrid composites. Impedance spectroscopy and a four-probe resistivity method were used for room temperature electrical conductivity measurements. The electrical conductivity of the chitin-based GO–ZnO hybrid composites was estimated to be ∼5.94 × 10 6 S/cm and was greater than that of the chitosan-based GO–ZnO hybrid composite (∼4.13 × 10 6 S/cm). The chitin-based GO–ZnO hybrid composite had a higher optical band gap (3.4 eV) than the chitosan-based GO–ZnO hybrid composite (3.0 eV). The current–voltage measurement showed that electrical sheets resistance of the chitosan-based composites decreased with formation of ZnO

  7. Single-step synthesis of Er3+ and Yb3+ ions doped molybdate/Gd2O3 core–shell nanoparticles for biomedical imaging

    Science.gov (United States)

    Kamińska, Izabela; Elbaum, Danek; Sikora, Bożena; Kowalik, Przemysław; Mikulski, Jakub; Felcyn, Zofia; Samol, Piotr; Wojciechowski, Tomasz; Minikayev, Roman; Paszkowicz, Wojciech; Zaleszczyk, Wojciech; Szewczyk, Maciej; Konopka, Anna; Gruzeł, Grzegorz; Pawlyta, Mirosława; Donten, Mikołaj; Ciszak, Kamil; Zajdel, Karolina; Frontczak-Baniewicz, Małgorzata; Stępień, Piotr; Łapiński, Mariusz; Wilczyński, Grzegorz; Fronc, Krzysztof

    2018-01-01

    Nanostructures as color-tunable luminescent markers have become major, promising tools for bioimaging and biosensing. In this paper separated molybdate/Gd2O3 doped rare earth ions (erbium, Er3+ and ytterbium, Yb3+) core–shell nanoparticles (NPs), were fabricated by a one-step homogeneous precipitation process. Emission properties were studied by cathodo- and photoluminescence. Scanning electron and transmission electron microscopes were used to visualize and determine the size and shape of the NPs. Spherical NPs were obtained. Their core–shell structures were confirmed by x-ray diffraction and energy-dispersive x-ray spectroscopy measurements. We postulated that the molybdate rich core is formed due to high segregation coefficient of the Mo ion during the precipitation. The calcination process resulted in crystallization of δ/ξ (core/shell) NP doped Er and Yb ions, where δ—gadolinium molybdates and ξ—molybdates or gadolinium oxide. We confirmed two different upconversion mechanisms. In the presence of molybdenum ions, in the core of the NPs, Yb3+–{{{{MoO}}}4}2- (∣2F7/2, 3T2〉) dimers were formed. As a result of a two 980 nm photon absorption by the dimer, we observed enhanced green luminescence in the upconversion process. However, for the shell formed by the Gd2O3:Er, Yb NPs (without the Mo ions), the typical energy transfer upconversion takes place, which results in red luminescence. We demonstrated that the NPs were transported into cytosol of the HeLa and astrocytes cells by endocytosis. The core–shell NPs are sensitive sensors for the environment prevailing inside (shorter luminescence decay) and outside (longer luminescence decay) of the tested cells. The toxicity of the NPs was examined using MTT assay.

  8. Single-step synthesis of Er3+and Yb3+ions doped molybdate/Gd2O3core-shell nanoparticles for biomedical imaging.

    Science.gov (United States)

    Kamińska, Izabela; Elbaum, Danek; Sikora, Bożena; Kowalik, Przemysław; Mikulski, Jakub; Felcyn, Zofia; Samol, Piotr; Wojciechowski, Tomasz; Minikayev, Roman; Paszkowicz, Wojciech; Zaleszczyk, Wojciech; Szewczyk, Maciej; Konopka, Anna; Gruzeł, Grzegorz; Pawlyta, Mirosława; Donten, Mikołaj; Ciszak, Kamil; Zajdel, Karolina; Frontczak-Baniewicz, Małgorzata; Stępień, Piotr; Łapiński, Mariusz; Wilczyński, Grzegorz; Fronc, Krzysztof

    2018-01-12

    Nanostructures as color-tunable luminescent markers have become major, promising tools for bioimaging and biosensing. In this paper separated molybdate/Gd 2 O 3 doped rare earth ions (erbium, Er 3+ and ytterbium, Yb 3+ ) core-shell nanoparticles (NPs), were fabricated by a one-step homogeneous precipitation process. Emission properties were studied by cathodo- and photoluminescence. Scanning electron and transmission electron microscopes were used to visualize and determine the size and shape of the NPs. Spherical NPs were obtained. Their core-shell structures were confirmed by x-ray diffraction and energy-dispersive x-ray spectroscopy measurements. We postulated that the molybdate rich core is formed due to high segregation coefficient of the Mo ion during the precipitation. The calcination process resulted in crystallization of δ/ξ (core/shell) NP doped Er and Yb ions, where δ-gadolinium molybdates and ξ-molybdates or gadolinium oxide. We confirmed two different upconversion mechanisms. In the presence of molybdenum ions, in the core of the NPs, Yb 3+ -[Formula: see text] (∣ 2 F 7/2 , 3 T 2 〉) dimers were formed. As a result of a two 980 nm photon absorption by the dimer, we observed enhanced green luminescence in the upconversion process. However, for the shell formed by the Gd 2 O 3 :Er, Yb NPs (without the Mo ions), the typical energy transfer upconversion takes place, which results in red luminescence. We demonstrated that the NPs were transported into cytosol of the HeLa and astrocytes cells by endocytosis. The core-shell NPs are sensitive sensors for the environment prevailing inside (shorter luminescence decay) and outside (longer luminescence decay) of the tested cells. The toxicity of the NPs was examined using MTT assay.

  9. One Pot Single Step Synthesis and Biological Evaluation of Some Novel Bis(1,3,4-thiadiazole Derivatives as Potential Cytotoxic Agents

    Directory of Open Access Journals (Sweden)

    Sobhi M. Gomha

    2016-11-01

    Full Text Available A novel series of bis(1,3,4-thiadiazole derivatives were synthesized in one step methodology with good yields by condensation reaction between bis-hydrazonoyl chloride 1 and various reagents. The structures of the prepared compounds were confirmed by spectral data (IR, NMR, and MS, and elemental analysis. The anticancer activity against human breast carcinoma (MCF-7 cancer cell lines was evaluated in MTT assay. The results revealed that the bis-thiadiazole derivatives 5c,d, 7b,c and 9c had higher antitumor activity than the standard drug Imatinib.

  10. Direct synthesis of L1{sub 0} FePt nanoparticles within carbon nanotubes by wet chemical procedure

    Energy Technology Data Exchange (ETDEWEB)

    Capobianchi, A; Laureti, S; Fiorani, D [Consiglio Nazionale delle Ricerche (CNR), Istituto di Struttura della Materia (ISM), Rome (Italy); Foglia, S [Consiglio Nazionale delle Ricerche (CNR), Istituto di Fotonica e Nanotecnologie, Rome (Italy); Palange, E, E-mail: aldo.capobianchi@ism.cnr.i [Universita degli Studi dell' Aquila, Dipartimento di Ingegneria Elettrica e dell' Informazione, L' Aquila (Italy)

    2010-12-01

    This paper reports on the low temperature synthesis of L1{sub 0} iron-platinum (FePt) particles within multiwall carbon nanotubes using a novel wet chemical method that allows the filling of the nanotube cavity keeping clean its external wall. In the proposed procedure, nanotubes are filled with a precursor salt of hexaaquairon(II) hexachloroplatinate, ([Fe(H{sub 2}O){sub 6}][PtCl{sub 6}]) and nanoparticles of the magnetically hard phase are directly obtained by heating at 400 {sup 0}C in a reductive atmosphere. The advantage of such a precursor, allowing one to obtain at low temperature the L1{sub 0} phase without passing through the soft fcc phase, is due to its structure, where the Fe and Pt atoms are arranged in alternating planes, as in the fct FePt structure. Morphological, structural and magnetic properties of the filled nanotubes have been investigated by transmission electron microscopy, x-ray diffraction and magnetization measurements. The results show the coexistence of nanoparticles in the superparamagnetic and blocked state, depending on the temperature, due to the particle size distribution.

  11. Surface chemical approach to single-step measurement of antibody in human serum using localized surface plasmon resonance biosensor on microtiter plate system.

    Science.gov (United States)

    Yamamichi, Junta; Ojima, Tetsunori; Iida, Mie; Yurugi, Kimiko; Imamura, Takeshi; Ashihara, Eishi; Kimura, Shinya; Maekawa, Taira

    2014-07-01

    In clinical settings, serum antibody levels serve as markers of pathology. For example, antibodies related to autoimmune diseases are among the conventional targets in laboratory tests. Simple clinical tests can improve the efficacy of laboratory practice. This study describes a single-step, wash-free technique for optically detecting antibodies in human serum through the localized surface plasmon resonance (LSPR) of gold nanoparticles. As a proof-of-concept experiment, the amount of antibiotin dissolved in human serum was measured with a LSPR-based biosensor in a wash-free manner using a conventional 96-well microtiter plate and a plate reader. For an efficient surface modification of biosensors, zwitterionic copolymer was used as a scaffold on the gold nanoparticle surface to immobilize antigen and blocking reagent. Single-step, wash-free measurement of antibiotin in human serum was successfully achieved. In addition, nonspecific responses from serum contents were significantly reduced because both the copolymer and hydrophilic antigen reagent that we employed were composed of poly(ethylene oxide) spacer. Comparative experiments of the antigen-antibody reaction in serum to that in buffered solution revealed that serum is a favorable environment for the biological reaction. In conclusion, our gold-nanoparticle-based LSPR method may provide a rapid and simple way to measure the amount of antibody in serum quantitatively in clinical practice.

  12. Microwave pyrolysis using self-generated pyrolysis gas as activating agent: An innovative single-step approach to convert waste palm shell into activated carbon

    Science.gov (United States)

    Yek, Peter Nai Yuh; Keey Liew, Rock; Shahril Osman, Mohammad; Chung Wong, Chee; Lam, Su Shiung

    2017-11-01

    Waste palm shell (WPS) is a biomass residue largely available from palm oil industries. An innovative microwave pyrolysis method was developed to produce biochar from WPS while the pyrolysis gas generated as another product is simultaneously used as activating agent to transform the biochar into waste palm shell activated carbon (WPSAC), thus allowing carbonization and activation to be performed simultaneously in a single-step approach. The pyrolysis method was investigated over a range of process temperature and feedstock amount with emphasis on the yield and composition of the WPSAC obtained. The WPSAC was tested as dye adsorbent in removing methylene blue. This pyrolysis approach provided a fast heating rate (37.5°/min) and short process time (20 min) in transforming WPS into WPSAC, recording a product yield of 40 wt%. The WPSAC was detected with high BET surface area (≥ 1200 m2/g), low ash content (recording high adsorption efficiency of 440 mg of dye/g. The desirable process features (fast heating rate, short process time) and the recovery of WPSAC suggest the exceptional promise of the single-step microwave pyrolysis approach to produce high-grade WPSAC from WPS.

  13. Single-step syngas-to-distillates (S2D) process based on biomass-derived syngas--a techno-economic analysis.

    Science.gov (United States)

    Zhu, Yunhua; Jones, Susanne B; Biddy, Mary J; Dagle, Robert A; Palo, Daniel R

    2012-08-01

    This study compared biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT), goal, and conventional, were compared in terms of performance and cost. The SOT case represented the best available experimental results for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation. The conventional case mirrored a conventional two-step S2D process consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. The goal case assumed the same performance as the conventional, but with a single-step S2D technology. TEA results revealed that the SOT was more expensive than the conventional and goal cases. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield and single pass conversion efficiency were the key factors driving the high cost for the SOT case. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Implementation of genomic recursions in single-step genomic best linear unbiased predictor for US Holsteins with a large number of genotyped animals.

    Science.gov (United States)

    Masuda, Y; Misztal, I; Tsuruta, S; Legarra, A; Aguilar, I; Lourenco, D A L; Fragomeni, B O; Lawlor, T J

    2016-03-01

    The objectives of this study were to develop and evaluate an efficient implementation in the computation of the inverse of genomic relationship matrix with the recursion algorithm, called the algorithm for proven and young (APY), in single-step genomic BLUP. We validated genomic predictions for young bulls with more than 500,000 genotyped animals in final score for US Holsteins. Phenotypic data included 11,626,576 final scores on 7,093,380 US Holstein cows, and genotypes were available for 569,404 animals. Daughter deviations for young bulls with no classified daughters in 2009, but at least 30 classified daughters in 2014 were computed using all the phenotypic data. Genomic predictions for the same bulls were calculated with single-step genomic BLUP using phenotypes up to 2009. We calculated the inverse of the genomic relationship matrix GAPY(-1) based on a direct inversion of genomic relationship matrix on a small subset of genotyped animals (core animals) and extended that information to noncore animals by recursion. We tested several sets of core animals including 9,406 bulls with at least 1 classified daughter, 9,406 bulls and 1,052 classified dams of bulls, 9,406 bulls and 7,422 classified cows, and random samples of 5,000 to 30,000 animals. Validation reliability was assessed by the coefficient of determination from regression of daughter deviation on genomic predictions for the predicted young bulls. The reliabilities were 0.39 with 5,000 randomly chosen core animals, 0.45 with the 9,406 bulls, and 7,422 cows as core animals, and 0.44 with the remaining sets. With phenotypes truncated in 2009 and the preconditioned conjugate gradient to solve mixed model equations, the number of rounds to convergence for core animals defined by bulls was 1,343; defined by bulls and cows, 2,066; and defined by 10,000 random animals, at most 1,629. With complete phenotype data, the number of rounds decreased to 858, 1,299, and at most 1,092, respectively. Setting up GAPY(-1

  15. Single-Step Arthroscopic Repair With Cell-Free Polymer-Based Scaffold in Osteochondral Lesions of the Talus: Clinical and Radiological Results.

    Science.gov (United States)

    Kanatlı, Ulunay; Eren, Ali; Eren, Toygun Kağan; Vural, Abdurrahman; Geylan, Dilan Ece; Öner, Ali Yusuf

    2017-09-01

    To report the clinical and radiological results of patients with talar osteochondral lesions who were treated by microfracture and cell-free scaffold implantation in a single-step arthroscopic surgery. Forty patients, treated with a single-step arthroscopic surgery, were evaluated in this single-center-based retrospective study. Patients with degenerative arthritis (n = 1), history of ankle fracture (n = 1), kissing lesions (n = 1), lower extremity deformity (n = 1), and lesions 10 mm depth) bone cysts were additionally treated with bone graft. Patients were evaluated clinically, using the American Orthopedic Foot and Ankle Society (AOFAS) hindfoot score. Radiological assessment was performed with magnetic resonance imaging, using the magnetic resonance observation of cartilage repair tissue (MOCART) score. Thirty-two patients with a mean age of 38 ± 12 years were evaluated. The mean defect size was 2.5 ± 0.8 cm 2 and the mean defect volume was 2.4 ± 1.9 cm 3 . The mean preoperative AOFAS score was 52.8 ± 13.9 and increased to 87.1 ± 11.1 postoperatively at the mean follow-up of 33.8 ± 14.0 months (P = .0001). A total of 84.4% of patients had good to excellent clinical scores. Clinical scores had no significant relation with age, lesion size, depth, or body mass index. The mean MOCART score was 64.2 ± 12.0. There was no significant correlation between the total MOCART and AOFAS scores (P = .123). A significant relation was found between the defect filling (the subgroup of the MOCART score) and the clinical outcomes (P = .0001, rho = 0.731). The arthroscopic scaffold implantation technique is a single-step, safe, and effective method for the treatment of talar osteochondral lesions with satisfactory clinical and radiological outcomes. Level IV, therapeutic case series. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  16. Single-step purification and characterization of an extreme halophilic, ethanol tolerant and acidophilic xylanase from Aureobasidium pullulans NRRL Y-2311-1 with application potential in the food industry.

    Science.gov (United States)

    Yegin, Sirma

    2017-04-15

    An extracellular xylanase from Aureobasidium pullulans NRRL Y-2311-1 produced on wheat bran was purified by a single-step chromatographic procedure. The enzyme had a molecular weight of 21.6kDa. The optimum pH and temperature for xylanase activity were 4.0 and 30-50°C, respectively. The enzyme was stable in the pH range of 3.0-8.0. The inactivation energy of the enzyme was calculated as 218kJmol -1 . The xylanase was ethanol tolerant and kept complete activity in the presence of 10% ethanol. Likewise, it retained almost complete activity at a concentration range of 0-20% NaCl. In general, the enzyme was resistant to several metal ions and reagents. Mg 2+ , Zn 2+ , Cu 2+ , K 1+ , EDTA and β-mercaptoethanol resulted in enhanced xylanase activity. The K m and V max values on beechwood xylan were determined to be 19.43mgml -1 and 848.4Uml -1 , respectively. The enzyme exhibits excellent characteristics and could, therefore, be a promising candidate for application in food and bio-industries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. The single-step method of RNA isolation by acid guanidinium thiocyanate-phenol-chloroform extraction: twenty-something years on.

    Science.gov (United States)

    Chomczynski, Piotr; Sacchi, Nicoletta

    2006-01-01

    Since its introduction, the 'single-step' method has become widely used for isolating total RNA from biological samples of different sources. The principle at the basis of the method is that RNA is separated from DNA after extraction with an acidic solution containing guanidinium thiocyanate, sodium acetate, phenol and chloroform, followed by centrifugation. Under acidic conditions, total RNA remains in the upper aqueous phase, while most of DNA and proteins remain either in the interphase or in the lower organic phase. Total RNA is then recovered by precipitation with isopropanol and can be used for several applications. The original protocol, enabling the isolation of RNA from cells and tissues in less than 4 hours, greatly advanced the analysis of gene expression in plant and animal models as well as in pathological samples, as demonstrated by the overwhelming number of citations the paper gained over 20 years.

  18. Combination of electromembrane extraction and liquid-phase microextraction in a single step: Simultaneous group separation of acidic and basic drugs

    DEFF Research Database (Denmark)

    Huang, Chuixiu; Seip, Knut Fredrik; Gjelstad, Astrid

    2015-01-01

    Electromembrane extraction (EME) and liquid-phase microextraction (LPME) were combined in a single step for the first time to realize simultaneous and clear group separation of basic and acidic drugs. Using 2-nitrophenyl octyl ether as the supported liquid membrane (SLM) for EME and dihexyl ether...... as the SLM for LPME, basic and acidic drugs were extracted and separated simultaneously from a low pH sample by EME and LPME, respectively. After 15 min of extraction, basic drugs (citalopram and sertraline) were exhaustively extracted, whereas the recoveries for acidic drugs (ketoprofen and ibuprofen) were...... in the range of 76%-86%. Longer extraction time provided higher recoveries for the acidic drugs, but this somewhat deteriorated the group separation. Matrices effects from the coexisting acidic drugs/basic drugs were tested, and we observed that simultaneous EME/LPME was not affected by coexisting drugs...

  19. Single-Step Fabrication of Gd2O3@SiO2 Nanoparticles for use as MRI Contrast Agents by Pulsed Laser Ablation in Liquid

    Science.gov (United States)

    Luo, Ning-Qi; Huang, Zhan-Yun; Li, Li; Shao, Yuan-Zhi; Chen, Di-Hu

    2013-03-01

    Gd2O3@SiO2 nanoparticles with a core-shell structure are synthesized by pulsed laser ablation in liquid (PLAL) in single steps. A Gd2O3 target immersed in tetraethyl orthosilicate (TEOS) is ablated by a microsecond Nd:YAG laser, which induces the generation of a Gd2O3 plasma plume and pyrolysis of the TEOS. We propose that the moment Gd2O3 nanoparticles are formed they will be coated immediately by SiO2 and directly synthesized Gd2O3@SiO2 core-shell nanoparticles. These particles obtain high r1 relaxivity of 5.26s-1mM-1 and are used as T1-weighted magnetic resonance imaging contrast agents. It is shown that the PLAL technique is promising for fabricating core-shell structure nanomaterial with potential medical applications.

  20. A practical procedure for the synthesis of esonarimod, (R,S)-2-acetylthiomethyl-4-(4-methylphenyl)-4-oxobutanoic acid, an antirheumatic agent (part 1).

    Science.gov (United States)

    Noguchi, Toshiya; Onodera, Akira; Tomisawa, Kazuyuki; Yokomori, Sadakazu

    2002-10-01

    An efficient and practical procedure for the synthesis of esonarimod, (R,S)-2-acetylthiomethyl-4-(4-methylphenyl)-4-oxobutanoic acid (1), a new antirheumatic drug, has been developed. The intermediate, 2-methylene-4-(4-methylphenyl)-4-oxobutanoic acid (2), was prepared by Friedel-Crafts acylation of toluene with itaconic anhydride (3) in the presence of aluminum trichloride and nitrobenzene in 63% yield without silica gel column purification. Compound 1 was prepared by Michael addition of 2 with thioacetic acid (4) in 74% yield. Overall, 1 was obtained in 47% yield from 3. The structures and synthetic mechanisms of by-products (five compounds) of 2 were also clarified.

  1. The facile preparation of primary and secondary amines via an improved Fukuyama-Mitsunobu procedure. Application to the synthesis of a lung-targeted gene delivery agent.

    Science.gov (United States)

    Guisado, Cristina; Waterhouse, Jodie E; Price, Wayne S; Jorgensen, Michael R; Miller, Andrew D

    2005-03-21

    An efficient modification of the Fukuyama-Mitsunobu procedure has been developed whereby primary or secondary amines can be synthesized from alkyl alcohols and the corresponding nosyl-protected/activated amine. Most importantly, the use of the DTBAD and diphenylpyridinylphosphine, as Mitsunobu reagents, generates reaction by-products that can be easily removed, providing a remarkably clean product mixture. This improved technique was implemented in the synthesis of a complex lipopeptide designed to target alpha9beta1-integrin proteins predominant on upper airway epithelial cells.

  2. Application of single-step genomic best linear unbiased prediction with a multiple-lactation random regression test-day model for Japanese Holsteins.

    Science.gov (United States)

    Baba, Toshimi; Gotoh, Yusaku; Yamaguchi, Satoshi; Nakagawa, Satoshi; Abe, Hayato; Masuda, Yutaka; Kawahara, Takayoshi

    2017-08-01

    This study aimed to evaluate a validation reliability of single-step genomic best linear unbiased prediction (ssGBLUP) with a multiple-lactation random regression test-day model and investigate an effect of adding genotyped cows on the reliability. Two data sets for test-day records from the first three lactations were used: full data from February 1975 to December 2015 (60 850 534 records from 2 853 810 cows) and reduced data cut off in 2011 (53 091 066 records from 2 502 307 cows). We used marker genotypes of 4480 bulls and 608 cows. Genomic enhanced breeding values (GEBV) of 305-day milk yield in all the lactations were estimated for at least 535 young bulls using two marker data sets: bull genotypes only and both bulls and cows genotypes. The realized reliability (R 2 ) from linear regression analysis was used as an indicator of validation reliability. Using only genotyped bulls, R 2 was ranged from 0.41 to 0.46 and it was always higher than parent averages. The very similar R 2 were observed when genotyped cows were added. An application of ssGBLUP to a multiple-lactation random regression model is feasible and adding a limited number of genotyped cows has no significant effect on reliability of GEBV for genotyped bulls. © 2016 Japanese Society of Animal Science.

  3. Polymer Nanocomposite Film with Metal Rich Surface Prepared by In Situ Single-Step Formation of Palladium Nanoparticles: An Interesting Way to Combine Specific Functional Properties

    Directory of Open Access Journals (Sweden)

    David Thompson

    2016-10-01

    Full Text Available This paper presents a continuous single-step route that permits preparation of a thermostable polymer/metal nanocomposite film and to combine different functional properties in a unique material. More precisely, palladium nanoparticles are in situ generated in a polyimide matrix thanks to a designed curing cycle which is applied to a polyamic acid/metal precursor solution cast on a glass plate. A metal-rich surface layer which is strongly bonded to the bulk film is formed in addition to homogeneously dispersed metal nanoparticles. This specific morphology leads to obtaining an optically reflective film. The metal nanoparticles act as gas diffusion barriers for helium, oxygen, and carbon dioxide; they induce a tortuosity effect which allows dividing the gas permeation coefficients by a factor near to 2 with respect to the neat polyimide matrix. Moreover, the ability of the in situ synthesized palladium nanoparticles to entrap hydrogen is evidenced. The nanocomposite film properties can be modulated as a function of the location of the film metal-rich surface with respect to the hydrogen feed. The synthesized nanocomposite could represent a major interest for a wide variety of applications, from specific coatings for aerospace or automotive industry, to catalysis applications or sensors.

  4. A rapid, ratiometric, enzyme-free, and sensitive single-step miRNA detection using three-way junction based FRET probes

    Science.gov (United States)

    Luo, Qingying; Liu, Lin; Yang, Cai; Yuan, Jing; Feng, Hongtao; Chen, Yan; Zhao, Peng; Yu, Zhiqiang; Jin, Zongwen

    2018-03-01

    MicroRNAs (miRNAs) are single stranded endogenous molecules composed of only 18-24 nucleotides which are critical for gene expression regulating the translation of messenger RNAs. Conventional methods based on enzyme-assisted nucleic acid amplification techniques have many problems, such as easy contamination, high cost, susceptibility to false amplification, and tendency to have sequence mismatches. Here we report a rapid, ratiometric, enzyme-free, sensitive, and highly selective single-step miRNA detection using three-way junction assembled (or self-assembled) FRET probes. The developed strategy can be operated within the linear range from subnanomolar to hundred nanomolar concentrations of miRNAs. In comparison with the traditional approaches, our method showed high sensitivity for the miRNA detection and extreme selectivity for the efficient discrimination of single-base mismatches. The results reveal that the strategy paved a new avenue for the design of novel highly specific probes applicable in diagnostics and potentially in microscopic imaging of miRNAs in real biological environments.

  5. Selective Single-Step Separation of a Mixture of Three Metal Ions by a Triphasic Ionic-Liquid-Water-Ionic-Liquid Solvent Extraction System.

    Science.gov (United States)

    Vander Hoogerstraete, Tom; Blockx, Jonas; De Coster, Hendrik; Binnemans, Koen

    2015-08-10

    In a conventional solvent extraction system, metal ions are distributed between two immiscible phases, typically an aqueous and an organic phase. In this paper, the proof-of-principle is given for the distribution of metal ions between three immiscible phases, two ionic liquid phases with an aqueous phase in between them. Three-liquid-phase solvent extraction allows separation of a mixture of three metal ions in a single step, whereas at least two steps are required to separate three metals in the case of two-liquid-phase solvent extraction. In the triphasic system, the lower organic phase is comprised of the ionic liquid betainium- or choline bis(trifluoromethylsulfonyl)imide, whereas the upper organic phase is comprised of the ionic liquid trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)imide. The triphasic system was used for the separation of a mixture of tin(II), yttrium(III), and scandium(III) ions. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Genetic analysis of allelic variants, single-step mutations, three allelic variants of the 15 STR loci in the population of Northeast Bosnia

    Directory of Open Access Journals (Sweden)

    Hadžiavdić Vesna

    2013-01-01

    Full Text Available Diversity of nuclear DNA microsatellite markers were analyzed in a reference sample of the population of northeast Bosnia. 437 samples taken from unrelated individuals were processed and three samples of paternity proof were shown. Detection effectiveness profile of the research, points to a valid choice of method of extraction, amplification and genotyping STR loci with PowerPlextm16. Genetic analysis of allelic variants of the 15 STR loci detected 17 samples determined as microvariants. Samples were divided into 15 different allelic variants at 7 different loci, and are: in locus D7S820, D16S539, D3S1358, D18S51, PENTA D, PENTA E and in locus vWA. Genetic analysis of mutations in cases of paternity determined three examples of single-step mutations in the loci FGA, Penta D and D3S1358. Genetic analysis of observed STR loci detected three allelic variant of genotype combination 7/10/11.3 in locus D7S820 Type II.

  7. Biorecovered precious metals from industrial wastes: single-step conversion of a mixed metal liquid waste to a bioinorganic catalyst with environmental application.

    Science.gov (United States)

    Mabbett, Amanda N; Sanyahumbi, Douglas; Yong, Ping; Macaskie, Lynne E

    2006-02-01

    The complete and continuous reduction of 1 mM Cr(VI) to Cr(III) was achieved in a flow-through reactor using a novel bioinorganic catalyst ("MM-bio-Pd(0)"), which was produced by single-step reduction of platinum group metals (PGM) from industrial waste solution onto biomass of Desulfovibrio desulfuricans ATCC 29577. Two flow-through reactor systems were compared using both "MM-bioPd(0)" and chemically reduced Pd(0). Reactors containing the latter removed Cr(VI) for 1 week only at the expense of formate as the electron donor, whereas the former gave complete Cr(VI) removal for 3 months of continuous operation. Mass balance analysis showed 100% reduction of Cr(VI) to soluble Cr(III) in the bioreactor exit solution. With the use of electron paramagnetic resonance (EPR) no intermediate Cr(V) species could be detected. Pd(0) was biodeposited similarly using Escherichia coliMC4100 and "bio-Pd(0)". The latter was used to recover Pd(II) from two acidic industrial waste leachates to generate two types of "MM-bio-Pd(0)": "SI-bio-Pd(0)" and "SII-bio-Pd(0)", respectively. The biomaterial composition was comparable in both cases, and the catalytic activity was related inversely to the amount of chloride in the waste leachate from which it was derived.

  8. Quality CuInSe2 and Cu(In,Ga)Se2 thin films processed by single-step electrochemical deposition techniques

    Science.gov (United States)

    Papadimitriou, D.; Roupakas, G.; Sáez-Araoz, R.; Lux-Steiner, M.-Ch; Nickel, N. H.; Alamé, S.; Vogt, P.; Kneissl, M.

    2015-05-01

    Ternary CuInSe2 and quaternary Cu(In,Ga)Se2 chalcopyrite semiconductor films with potential applications as solar absorbers were deposited by single-step electrochemical deposition (ECD) on molybdenum coated glass substrates. The films have been structurally characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) combined with energy dispersive x-ray analysis (EDAX), x-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Chalcopyrite phase formation was confirmed already in as-deposited films. The crystal structure of the films was further improved by thermal treatment. Element interdiffusion at the chalcopyrite/Mo/glass interface has been prevented by retaining moderate temperatures of deposition (70 °C) and subsequent annealing (300 °C). The SEM/EDAX analysis revealed the presence of CuxSe secondary phases on the surface of ternary films and almost stoichiometric growth of quaternary deposited on top of ternary films. The XRD and Raman analysis confirmed the high quality assessment of the films being almost equal to that of chalcopyrite selenide layers grown by physical vapor deposition at high temperatures (550-750 °C). The surface sensitive XPS analysis confirmed the absence of other impurities in the ECD processed films except from oxygen and carbon adsorbents by sample exposure to atmospheric air.

  9. Mesoporous-activated carbon prepared from chitosan flakes via single-step sodium hydroxide activation for the adsorption of methylene blue.

    Science.gov (United States)

    Marrakchi, F; Ahmed, M J; Khanday, W A; Asif, M; Hameed, B H

    2017-05-01

    In this work, mesoporous-activated carbon (CSAC) was prepared from chitosan flakes (CS) via single-step sodium hydroxide activation for the adsorption of methylene blue (MB). CSAC was prepared using different impregnation ratios of NaOH:CS (1:1, 2:1, 3:1, and 4:1) at 800°C for 90min. The adsorption performance of CSAC was evaluated for MB at different adsorption variables, such MB initial concentrations (25-400mg/L), solution pH (3-11), and temperature (30-50°C). The adsorption isotherm data of CSAC-MB were well fitted to Langmuir model with a maximum adsorption capacity 143.53mg/g at 50°C. Best representation of kinetic data was obtained by the pseudo-second order model. CSAC exhibited excellent adsorption uptake for MB and can potentially be used for other cationic dyes. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Beyond Synthesis: Augmenting Systematic Review Procedures with Practical Principles to Optimise Impact and Uptake in Educational Policy and Practice

    Science.gov (United States)

    Green, Chris; Taylor, Celia; Buckley, Sharon; Hean, Sarah

    2016-01-01

    Whilst systematic reviews, meta-analyses and other forms of synthesis are considered amongst the most valuable forms of research evidence, their limited impact on educational policy and practice has been criticised. In this article, we analyse why systematic reviews do not benefit users of evidence more consistently and suggest how review teams…

  11. Simple and general procedure for the synthesis of semi-rigid chelating agents for radiometal complexation studies and its application to semi-rigid functionalised ligands (BCA) synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Loussouarn, A.; Faivre-Chauvet, A.; Chatal, J.-F.; Gestin, J.-F. [INSERM, Nantes (France). Inst. de Biologie

    1999-07-01

    Immunotherapy with radiolabeled antibodies should allow fairly specific targeting of certain cancers. However, iodine-131 may not be the best isotope for tumour therapy because of its limited specific activity, low beta-energy, relatively long half-life and strong gamma emission. Another approach to improve therapeutic efficacy is the use of replacement isotopes with better physical properties. Chelators that can hold radiometals with high stability under physiological conditions are essential to avoid excessive radiation damage to non-target cells. Moreover, the development of new bifunctional chelating agents is essential for this purpose. Accordingly, our efforts have been directed, for several years, to the synthesis of original chelating agents likely to form stable complexes in vivo with the numerous potential candidates for such applications. The stability of a non-macrocyclic ligand can be favourably influenced by the preorganization of the open chain. In fact, a semi-rigid structure such as that of trans-1,2-diaminocyclohexane limits the rotation of the ethylene bridge, so that the purpose of the cyclohexane design is to preorient the four pendent arms in a skew position. Therefore, we have developed a new simple and efficient synthesis pathway from trans-1,2-diaminocyclohexane to provide access to a new class of semi-rigid chelating agents. This same reactional scheme will be apply to our reactional intermediary, (1R{sup *}, 2R{sup *}, 4S{sup *})-4-acetamido-1,2-diaminocyclohexane dihydrochloride, which will allow the synthesis of these same chelating agents, though functionalised back of the cycle by a termination allowed coupling to an antibody or any other biological substance such as a hapten. (orig.)

  12. Simple and general procedure for the synthesis of semi-rigid chelating agents for radiometal complexation studies and its application to semi-rigid functionalised ligands (BCA) synthesis

    International Nuclear Information System (INIS)

    Loussouarn, A.; Faivre-Chauvet, A.; Chatal, J.-F.; Gestin, J.-F.

    1999-01-01

    Immunotherapy with radiolabeled antibodies should allow fairly specific targeting of certain cancers. However, iodine-131 may not be the best isotope for tumour therapy because of its limited specific activity, low beta-energy, relatively long half-life and strong gamma emission. Another approach to improve therapeutic efficacy is the use of replacement isotopes with better physical properties. Chelators that can hold radiometals with high stability under physiological conditions are essential to avoid excessive radiation damage to non-target cells. Moreover, the development of new bifunctional chelating agents is essential for this purpose. Accordingly, our efforts have been directed, for several years, to the synthesis of original chelating agents likely to form stable complexes in vivo with the numerous potential candidates for such applications. The stability of a non-macrocyclic ligand can be favourably influenced by the preorganization of the open chain. In fact, a semi-rigid structure such as that of trans-1,2-diaminocyclohexane limits the rotation of the ethylene bridge, so that the purpose of the cyclohexane design is to preorient the four pendent arms in a skew position. Therefore, we have developed a new simple and efficient synthesis pathway from trans-1,2-diaminocyclohexane to provide access to a new class of semi-rigid chelating agents. This same reactional scheme will be apply to our reactional intermediary, (1R * , 2R * , 4S * )-4-acetamido-1,2-diaminocyclohexane dihydrochloride, which will allow the synthesis of these same chelating agents, though functionalised back of the cycle by a termination allowed coupling to an antibody or any other biological substance such as a hapten. (orig.)

  13. Single-step preparation of selected biological fluids for the high performance liquid chromatographic analysis of fat-soluble vitamins and antioxidants.

    Science.gov (United States)

    Lazzarino, Giacomo; Longo, Salvatore; Amorini, Angela Maria; Di Pietro, Valentina; D'Urso, Serafina; Lazzarino, Giuseppe; Belli, Antonio; Tavazzi, Barbara

    2017-12-08

    Fat-soluble vitamins and antioxidants are of relevance in health and disease. Current methods to extract these compounds from biological fluids mainly need use of multi-steps and multi organic solvents. They are time-consuming and difficult to apply to treat simultaneously large sample number. We here describe a single-step, one solvent extraction of fat-soluble vitamins and antioxidants from biological fluids, and the chromatographic separation of all-trans-retinoic acid, 25-hydroxycholecalciferol, all-trans-retinol, astaxanthin, lutein, zeaxanthin, trans-β-apo-8'-carotenal, γ-tocopherol, β-cryptoxanthin, α-tocopherol, phylloquinone, lycopene, α-carotene, β-carotene and coenzyme Q 10 . Extraction is obtained by adding one volume of biological fluid to two acetonitrile volumes, vortexing for 60s and incubating for 60min at 37°C under agitation. HPLC separation occurs in 30min using Hypersil C18, 100×4.6mm, 5μm particle size column, gradient from 70% methanol+30% H 2 O to 100% acetonitrile, flow rate of 1.0ml/min and 37°C column temperature. Compounds are revealed using highly sensitive UV-VIS diode array detector. The HPLC method suitability was assessed in terms of sensitivity, reproducibility and recovery. Using the present extraction and chromatographic conditions we obtained values of the fat-soluble vitamins and antioxidants in serum from 50 healthy controls similar to those found in literature. Additionally, the profile of these compounds was also measured in seminal plasma from 20 healthy fertile donors. Results indicate that this simple, rapid and low cost sample processing is suitable to extract fat-soluble vitamins and antioxidants from biological fluids and can be applied in clinical and nutritional studies. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Development and Evaluation of a Single-Step Duplex PCR for Simultaneous Detection of Fasciola hepatica and Fasciola gigantica (Family Fasciolidae, Class Trematoda, Phylum Platyhelminthes)

    Science.gov (United States)

    Nguyen, Khue Thi; Nguyen, Nga Thi Bich; Doan, Huong Thi Thanh; Le, Xuyen Thi Kim; Hoang, Chau Thi Minh; De, Nguyen Van

    2012-01-01

    A single-step multiplex PCR (here referred to as a duplex PCR) has been developed for simultaneous detection and diagnosis of Fasciola hepatica and F. gigantica. These species overlap in distribution in many countries of North and East Africa and Central and Southeast Asia and are similar in egg morphology, making identification from fecal samples difficult. Based on a comparative alignment of mitochondrial DNA (mtDNA) spanning the region of cox1-trnT-rrnL, two species-specific forward primers were designed, FHF (for F. hepatica) and FGF (for F. gigantica), and a single reverse primer, FHGR (common for both species). Conventional PCR followed by sequencing was applied using species-specific primer pairs to verify the specificity of primers and the identity of Fasciola DNA templates. Duplex PCR (using three primers) was used for testing with the DNA extracted from adult worms, miracidia, and eggs, producing amplicons of 1,031 bp for F. hepatica and 615 bp for F. gigantica. The duplex PCR failed to amplify from DNA of other common liver and intestinal trematodes, including two opisthorchiids, three heterophyids, an echinostomid, another fasciolid, and a taeniid cestode. The sensitivity assay showed that the duplex PCR limit of detection for each Fasciola species was between 0.012 ng and 0.006 ng DNA. Evaluation using DNA templates from 32 Fasciola samples (28 adults and 4 eggs) and from 25 field-collected stools of ruminants and humans revealed specific bands of the correct size and the presence of Fasciola species. This novel mtDNA duplex PCR is a sensitive and fast tool for accurate identification of Fasciola species in areas of distributional and zonal overlap. PMID:22692744

  15. Clinical utility of simultaneous whole-body 18F-FDG PET/MRI as a single-step imaging modality in the staging of primary nasopharyngeal carcinoma.

    Science.gov (United States)

    Chan, Sheng-Chieh; Yeh, Chih-Hua; Yen, Tzu-Chen; Ng, Shu-Hang; Chang, Joseph Tung-Chieh; Lin, Chien-Yu; Yen-Ming, Tsang; Fan, Kang-Hsing; Huang, Bing-Shen; Hsu, Cheng-Lung; Chang, Kai-Ping; Wang, Hung-Ming; Liao, Chun-Ta

    2018-03-03

    Both head and neck magnetic resonance imaging (MRI) and 18F-fluorodeoxyglucose (18F-FDG) positron emission tomography (PET)/computed tomography (CT) play a crucial role in the staging of primary nasopharyngeal carcinoma (NPC). In this study, we sought to prospectively investigate the clinical utility of simultaneous whole-body 18F-FDG PET/MRI for primary staging of NPC patients. We examined 113 patients with histologically confirmed NPC who underwent pretreatment, simultaneous whole-body PET/MRI and PET/CT for primary tumor staging. The images obtained with the different imaging modalities were interpreted independently and compared with each other. PET/MRI increased the accuracy of head and neck MRI for assessment of primary tumor extent in four patients via addition of FDG uptake information to increase the conspicuity of morphologically subtle lesions. PET/MR images were more discernible than PET/CT images for mapping tumor extension, especially intracranial invasion. Regarding the N staging assessment, the sensitivity of PET/MRI (99.5%) was higher than that of head and neck MRI (94.2%) and PET/CT (90.9%). PET/MRI was particularly useful for distinguishing retropharyngeal nodal metastasis from adjacent nasopharyngeal tumors. For distant metastasis evaluation, PET/MRI exhibited a similar sensitivity (90% vs. 86.7% vs. 83.3%), but higher positive predictive value (93.1% vs. 78.8% vs. 83.3%) than whole-body MRI and PET/CT, respectively. For tumor staging of NPC, simultaneous whole-body PET/MRI was more accurate than head and neck MRI and PET/CT, and may serve as a single-step staging modality.

  16. Use of genomic recursions and algorithm for proven and young animals for single-step genomic BLUP analyses--a simulation study.

    Science.gov (United States)

    Fragomeni, B O; Lourenco, D A L; Tsuruta, S; Masuda, Y; Aguilar, I; Misztal, I

    2015-10-01

    The purpose of this study was to examine accuracy of genomic selection via single-step genomic BLUP (ssGBLUP) when the direct inverse of the genomic relationship matrix (G) is replaced by an approximation of G(-1) based on recursions for young genotyped animals conditioned on a subset of proven animals, termed algorithm for proven and young animals (APY). With the efficient implementation, this algorithm has a cubic cost with proven animals and linear with young animals. Ten duplicate data sets mimicking a dairy cattle population were simulated. In a first scenario, genomic information for 20k genotyped bulls, divided in 7k proven and 13k young bulls, was generated for each replicate. In a second scenario, 5k genotyped cows with phenotypes were included in the analysis as young animals. Accuracies (average for the 10 replicates) in regular EBV were 0.72 and 0.34 for proven and young animals, respectively. When genomic information was included, they increased to 0.75 and 0.50. No differences between genomic EBV (GEBV) obtained with the regular G(-1) and the approximated G(-1) via the recursive method were observed. In the second scenario, accuracies in GEBV (0.76, 0.51 and 0.59 for proven bulls, young males and young females, respectively) were also higher than those in EBV (0.72, 0.35 and 0.49). Again, no differences between GEBV with regular G(-1) and with recursions were observed. With the recursive algorithm, the number of iterations to achieve convergence was reduced from 227 to 206 in the first scenario and from 232 to 209 in the second scenario. Cows can be treated as young animals in APY without reducing the accuracy. The proposed algorithm can be implemented to reduce computing costs and to overcome current limitations on the number of genotyped animals in the ssGBLUP method. © 2015 Blackwell Verlag GmbH.

  17. Development and evaluation of a single-step duplex PCR for simultaneous detection of Fasciola hepatica and Fasciola gigantica (family Fasciolidae, class Trematoda, phylum Platyhelminthes).

    Science.gov (United States)

    Le, Thanh Hoa; Nguyen, Khue Thi; Nguyen, Nga Thi Bich; Doan, Huong Thi Thanh; Le, Xuyen Thi Kim; Hoang, Chau Thi Minh; De, Nguyen Van

    2012-08-01

    A single-step multiplex PCR (here referred to as a duplex PCR) has been developed for simultaneous detection and diagnosis of Fasciola hepatica and F. gigantica. These species overlap in distribution in many countries of North and East Africa and Central and Southeast Asia and are similar in egg morphology, making identification from fecal samples difficult. Based on a comparative alignment of mitochondrial DNA (mtDNA) spanning the region of cox1-trnT-rrnL, two species-specific forward primers were designed, FHF (for F. hepatica) and FGF (for F. gigantica), and a single reverse primer, FHGR (common for both species). Conventional PCR followed by sequencing was applied using species-specific primer pairs to verify the specificity of primers and the identity of Fasciola DNA templates. Duplex PCR (using three primers) was used for testing with the DNA extracted from adult worms, miracidia, and eggs, producing amplicons of 1,031 bp for F. hepatica and 615 bp for F. gigantica. The duplex PCR failed to amplify from DNA of other common liver and intestinal trematodes, including two opisthorchiids, three heterophyids, an echinostomid, another fasciolid, and a taeniid cestode. The sensitivity assay showed that the duplex PCR limit of detection for each Fasciola species was between 0.012 ng and 0.006 ng DNA. Evaluation using DNA templates from 32 Fasciola samples (28 adults and 4 eggs) and from 25 field-collected stools of ruminants and humans revealed specific bands of the correct size and the presence of Fasciola species. This novel mtDNA duplex PCR is a sensitive and fast tool for accurate identification of Fasciola species in areas of distributional and zonal overlap.

  18. Single-step biosynthesis and characterization of silver nanoparticles using Zornia diphylla leaves: A potent eco-friendly tool against malaria and arbovirus vectors.

    Science.gov (United States)

    Govindarajan, Marimuthu; Rajeswary, Mohan; Muthukumaran, Udaiyan; Hoti, S L; Khater, Hanem F; Benelli, Giovanni

    2016-08-01

    Mosquitoes (Diptera: Culicidae) are vectors of important pathogens and parasites, including malaria, dengue, chikungunya, Japanese encephalitis, lymphatic filariasis and Zika virus. The application of synthetic insecticides causes development of resistance, biological magnification of toxic substances through the food chain, and adverse effects on the environment and human health. In this scenario, eco-friendly control tools of mosquito vectors are a priority. Here single-step fabrication of silver nanoparticles (AgNP) using a cheap aqueous leaf extract of Zornia diphylla as reducing and capping agent pf Ag(+) ions has been carried out. Biosynthesized AgNP were characterized by UV-visible spectrophotometry, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDX) and X-ray diffraction analysis (XRD). The acute toxicity of Z. diphylla leaf extract and biosynthesized AgNP was evaluated against larvae of the malaria vector Anopheles subpictus, the dengue vector Aedes albopictus and the Japanese encephalitis vector Culex tritaeniorhynchus. Both the Z. diphylla leaf extract and Ag NP showed dose dependent larvicidal effect against all tested mosquito species. Compared to the leaf aqueous extract, biosynthesized Ag NP showed higher toxicity against An. subpictus, Ae. albopictus, and Cx. tritaeniorhynchus with LC50 values of 12.53, 13.42 and 14.61μg/ml, respectively. Biosynthesized Ag NP were found safer to non-target organisms Chironomus circumdatus, Anisops bouvieri and Gambusia affinis, with the respective LC50 values ranging from 613.11 to 6903.93μg/ml, if compared to target mosquitoes. Overall, our results highlight that Z. diphylla-fabricated Ag NP are a promising and eco-friendly tool against larval populations of mosquito vectors of medical and veterinary importance, with negligible toxicity against other non-target organisms. Copyright © 2016 Elsevier B

  19. Estimation of breeding values for uniformity of growth in Atlantic salmon (Salmo salar) using pedigree relationships or single-step genomic evaluation.

    Science.gov (United States)

    Sae-Lim, Panya; Kause, Antti; Lillehammer, Marie; Mulder, Han A

    2017-03-07

    In farmed Atlantic salmon, heritability for uniformity of body weight is low, indicating that the accuracy of estimated breeding values (EBV) may be low. The use of genomic information could be one way to increase accuracy and, hence, obtain greater response to selection. Genomic information can be merged with pedigree information to construct a combined relationship matrix ([Formula: see text] matrix) for a single-step genomic evaluation (ssGBLUP), allowing realized relationships of the genotyped animals to be exploited, in addition to numerator pedigree relationships ([Formula: see text] matrix). We compared the predictive ability of EBV for uniformity of body weight in Atlantic salmon, when implementing either the [Formula: see text] or [Formula: see text] matrix in the genetic evaluation. We used double hierarchical generalized linear models (DHGLM) based either on a sire-dam (sire-dam DHGLM) or an animal model (animal DHGLM) for both body weight and its uniformity. With the animal DHGLM, the use of [Formula: see text] instead of [Formula: see text] significantly increased the correlation between the predicted EBV and adjusted phenotypes, which is a measure of predictive ability, for both body weight and its uniformity (41.1 to 78.1%). When log-transformed body weights were used to account for a scale effect, the use of [Formula: see text] instead of [Formula: see text] produced a small and non-significant increase (1.3 to 13.9%) in predictive ability. The sire-dam DHGLM had lower predictive ability for uniformity compared to the animal DHGLM. Use of the combined numerator and genomic relationship matrix ([Formula: see text]) significantly increased the predictive ability of EBV for uniformity when using the animal DHGLM for untransformed body weight. The increase was only minor when using log-transformed body weights, which may be due to the lower heritability of scaled uniformity, the lower genetic correlation of transformed body weight with its

  20. Single-step transepithelial ASLA (SCHWIND with mitomycin-C for the correction of high myopia: long term follow-up

    Directory of Open Access Journals (Sweden)

    Aslanides IM

    2014-12-01

    Full Text Available Ioannis M Aslanides, Panagiotis N Georgoudis, Vasilis D Selimis, Achyut N Mukherjee Emmetropia Mediterranean Eye Institute, Heraklion, Crete, Greece Purpose: We wanted to compare the outcomes of single-step modified transepithelial photorefractive keratectomy (tPRK termed a SCHWIND all surface laser ablation (ASLA versus conventional alcohol-assisted photorefractive keratectomy (PRK and laser-assisted in situ keratomileusis (LASIK for the correction of higher myopia of 6.00 diopters (D or more, in an area with high risk of haze due to high intensity of sunlight.Methods: We used a prospective interventional cohort with matched retrospective control groups. Patients with >6 D myopia and <3.5 D of astigmatism were included. All treatments were performed with the SCHWIND Amaris system using aspheric ablation profiles. Mitomycin C was used in all PRK and ASLA cases. Outcomes were postoperative refraction, visual acuity, stability, and complications. The follow-up period was up to 12 months.Results: In total, 101 eyes were included after exclusions. Mean preoperative spherical equivalent refraction was −7.9 D, −8.2 D, and −7.4 D in the ASLA (n=41, PRK (n=29, and LASIK (n=31 groups. Mean postoperative spherical equivalent at 12 months postoperatively was −0.1 (standard deviation [SD]: 0.34, −0.2 (SD: 0.59, and −0.08 (SD: 0.36 in the ASLA, PRK, and LASIK groups, with 91.4%, 85.7%, and 83.9% within 0.5 D of target, respectively. Refractive outcomes and regression at 12 months did not vary among groups (P>0.05. Mean logMAR (logarithm of the minimum angle of resolution uncorrected distance visual acuity at 12 months was 0.00 (SD: 0.05, 0.06 (SD: 0.1, and 0.05 (SD: 0.09 in the ASLA, PRK, and LASIK groups, with significantly better vision in the tPRK group versus LASIK (P=0.01 and PRK (P=0.01 groups.Conclusion: ASLA (SCHWIND tPRK with mitomycin C for high myopia demonstrates comparable refractive outcomes to LASIK and PRK, with relatively

  1. Synthesis of Functional Block Copolymers Carrying One Poly( p -phenylenevinylene) and One Nonconjugated Block in a Facile One-Pot Procedure

    KAUST Repository

    Menk, Florian

    2016-02-29

    Block copolymers composed of a MEH-PPV block and a nonconjugated functional block (molecular weights between 5 and 90 kg/mol) were synthesized in a facile one-pot procedure via ROMP. This one-pot procedure permits the synthesis of numerous block copolymers with little effort. Amphiphilic block copolymers were obtained via incorporation of oxanorbornene carrying a PEG side chain as well as via postpolymerization modification of a reactive ester carrying norbornene derivative with methoxypoly(ethylene glycol)amine. These amphiphilic block copolymers can be self-assembled into micelles exhibiting different sizes (60-95 nm), morphologies (micelles or fused, caterpillar-like micelles), and optical properties depending on the polymer composition and the micellization procedure. Furthermore, the reactive ester carrying block copolymers enabled the introduction of anchor groups which facilitated the preparation of nanocomposites with CdSe/CdZnS core-shell QDs. The obtained composites were studied using time-resolved photoluminescence measurements. The results revealed an increased interaction based on an accelerated decay of the QD emission for composites as compared to the mixture of the QDs with unfunctionalized polymers. © 2016 American Chemical Society.

  2. Um novo procedimento de síntese da zeólita A empregando argilas naturais A new procedure for a zeolite synthesis from natural clays

    Directory of Open Access Journals (Sweden)

    Reus T. Rigo

    2009-01-01

    Full Text Available This work proposes the synthesis of zeolite A by IZA standard proceedures starting from a natural clay. The clay was used in its natural form and after calcination at 900ºC. The resulting materials were characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM and porosity analysis by nitrogen adsorption. Results showed low surface area for Na-A zeolite in sodium form, but a higher one in CaA based on the nitrogen accessibility. The presence of cubic crystals for the A phase was observed in the SEM micrographies. The new procedure starting from natural clay favors the formation of sodalite while that using the calcinated clay gives A.

  3. Feasibility, safety, and outcomes of a single-step endoscopic ultrasonography-guided drainage of pancreatic fluid collections without fluoroscopy using a novel electrocautery-enhanced lumen-apposing, self-expanding metal stent

    Science.gov (United States)

    Yoo, Joseph; Yan, Linda; Hasan, Raza; Somalya, Saana; Nieto, Jose; Siddiqui, Ali A.

    2017-01-01

    Background and Objectives: There are currently limited data available regarding the safety of endoscopic ultrasound (EUS)-guided drainage of pancreatic fluid collections (PFCs) using the lumen-apposing metal stent without fluoroscopic guidance. This study aims to evaluate clinical outcomes and safety of EUS-guided drainage of PFC using the electrocautery-enhanced lumen-apposing metal stents (EC-LAMSs) without fluoroscopic guidance. Methods: We conducted a retrospective study on patients with symptomatic PFC who underwent EUS-guided drainage using EC-LAMS without fluoroscopy. All patients were followed clinically until resolution of their PFC. Technical success (successful placement of EC-LAMS), number of patients who achieved complete resolution of PFC without additional intervention and adverse events were noted. Results: We evaluated 25 patients, including three with pancreatic pseudocysts and 22 with walled-off necrosis (WON). The etiology of the patient's pancreatitis was gallstones (42%), alcohol (27%), and other causes (31%). The mean cyst size was 82 mm (range, 60–170 mm). The indications for endoscopic drainage were abdominal pain, infected WON, or gastric outlet obstruction. Technical success with placement of the EC-LAMS was achieved in all 25 patients. There were no procedure-related complications. The mean patient follow-up was 7.8 months. PFCs resolved in 24 (96%) patients; the one failure was in a patient with WON. Stent occlusion was seen in one patient. There was a spontaneous migration of one stent into the enteral lumen after resolution of WONs. The EC-LAMS were successfully removed using a snare in all the remaining patients. The median number of endoscopy sessions to achieve PFCs resolution was 2 (range, 2–6). Conclusions: Single-step EUS-guided drainage of PFCs without fluoroscopic guidance using the novel EC-LAMS is a safe and effective endoscopic technique for drainage of PFCs with excellent technical and clinical success rates and no

  4. A Four‐Component Reaction for the Synthesis of Dioxadiazaborocines

    DEFF Research Database (Denmark)

    Flagstad, Thomas; Petersen, Mette Terp; Nielsen, Thomas Eiland

    2015-01-01

    A four‐component reaction for the synthesis of heterocyclic boronates is reported. Readily available hydrazides, α‐hydroxy aldehydes, and two orthogonally reactive boronic acids are combined in a single step to give structurally distinct bicyclic boronates, termed dioxadiazaborocines (DODA...

  5. Synthesis and characterization of solid heterogeneous catalyst for ...

    African Journals Online (AJOL)

    Synthesis and characterization of solid heterogeneous catalyst for the production of biodiesel from high FFA waste cooking oil. Nasar Mansir, Taufiq-Yap Yun Hin. Abstract. No Abstract. Keywords: Biodiesel, Transesterification, High FFA waste cooking oil, Heterogeneous catalyst, Single step reaction process. Full Text:.

  6. Synthesis of tunable-band-gap "Open-Box" halide perovskites by use of anion exchange and internal dissolution procedures.

    Science.gov (United States)

    Wu, Zhengcui; Wang, Baohua; He, Jian; Chen, Tao

    2016-01-01

    We demonstrate the synthesis of cuboid MAPbBr3 (MA=CH3NH3) microcrystals and subsequent conversion into open-box-like MAPb(Br(1-x)I(x))3 (0⩽x⩽1) microcrystals by anion exchange in MAI solution. During the substitution of Br(-) with I(-), the initial cuboid framework of MAPbBr3 crystals is retained. The preferential internal dissolution of MAPbBr3 due to the surface coverage and protection of MAPb(Br(1-x)I(x))3 induces voids inside the cuboid crystals, finally leading to open-box-like iodide-rich MAPb(Br(1-x)I(x))3. By controlling the degree of anion exchange, the intense light absorption of the product is able to be tuned in specific wavelengths throughout the visible range. This solution-phase anion exchange approach provides a synthetic strategy in designing sophisticated organolead halide perovskites structures as well as tuning the band gaps for further applications across a range of possible domains. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Online hyphenation of extraction, Sephadex LH-20 column chromatography, and high-speed countercurrent chromatography: A highly efficient strategy for the preparative separation of andrographolide from Andrographis paniculata in a single step.

    Science.gov (United States)

    Zhang, Ying-Qi; Wang, Shan-Shan; Han, Chao; Xu, Jin-Fang; Luo, Jian-Guang; Kong, Ling-Yi

    2017-12-01

    A novel isolation strategy, online hyphenation of ultrasonic extraction, Sephadex LH-20 column chromatography combined with high-speed countercurrent chromatography, was developed for pure compounds extraction and purification. Andrographolide from Andrographis paniculata was achieved only in a single step purification protocol via the present strategy. The crude powder was ultrasonic extracted and extraction was pumped into Sephadex LH-20 column directly to cut the nontarget fractions followed by the second-dimensional high-speed countercurrent chromatography, hyphenated by a six-port valve equipped at the post-end of Sephadex LH-20 column, for the final purification. The results yielded andrographolide with the amount of 1.02 mg and a purity of 98.5% in a single step, indicating that the present method is effective to harvest target compound from medicinal plant. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Walking a Fine Line with Sucrose Phosphorylase: Efficient Single-Step Biocatalytic Production of l-Ascorbic Acid 2-Glucoside from Sucrose.

    Science.gov (United States)

    Gudiminchi, Rama Krishna; Nidetzky, Bernd

    2017-07-18

    The 2-O-α-d-glucoside of l-ascorbic acid (AA-2G) is a highly stabilized form of vitamin C, with important industrial applications in cosmetics, food, and pharmaceuticals. AA-2G is currently produced through biocatalytic glucosylation of l-ascorbic acid from starch-derived oligosaccharides. Sucrose would be an ideal substrate for AA-2G synthesis, but it lacks a suitable transglycosidase. We show here that in a narrow pH window (pH 4.8-6.0, with sharp optimum at pH 5.2), sucrose phosphorylases catalyzed the 2-O-α-glucosylation of l-ascorbic acid from sucrose with high efficiency and perfect site-selectivity. Optimized synthesis with the enzyme from Bifidobacterium longum at 40 °C gave a concentrated product (155 g L -1 ; 460 mm), from which pure AA-2G was readily recovered in ∼50 % overall yield, thus providing the basis for advanced production. The peculiar pH dependence is suggested to arise from a "reverse-protonation" mechanism in which the catalytic base Glu232 on the glucosyl-enzyme intermediate must be protonated for attack on the anomeric carbon from the 2-hydroxyl of the ionized l-ascorbate substrate. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Enzymatic synthesis and characterizations of cyclic GDP-ribose. A procedure for distinguishing enzymes with ADP-ribosyl cyclase activity.

    Science.gov (United States)

    Graeff, R M; Walseth, T F; Fryxell, K; Branton, W D; Lee, H C

    1994-12-02

    Cyclic nucleotides such as cAMP and cGMP are second messengers subserving various signaling pathways. Cyclic ADP-ribose (cADPR), a recently discovered member of the family, is derived from NAD+ and is a mediator of Ca2+ mobilization in various cellular systems. The synthesis and degradation of cADPR are, respectively, catalyzed by ADP-ribosyl cyclase and cADPR hydrolase. CD38, a differentiation antigen of B lymphocytes, has recently been shown to be a bifunctional enzyme catalyzing both the formation and hydrolysis of cADPR. The overall reaction catalyzed by CD38 is the formation of ADP-ribose and nicotinamide from NAD+, identical to that catalyzed by NADase. The difficulties in detecting the formation of cADPR have led to frequent identification of CD38 as a classical NADase. In this study, we show that both ADP-ribosyl cyclase and CD38, but not NADase, can cyclize nicotinamide guanine dinucleotide (NGD+) producing a new nucleotide. Analyses by high performance liquid chromatography and mass spectroscopy indicate the product is cyclic GDP-ribose (cGDPR) with a structure similar to cADPR except with guanine replacing adenine. Compared to cADPR, cGDPR is a more stable compound showing 2.8 times more resistance to heat-induced hydrolysis. These results are consistent with a catalytic scheme for CD38 where the cyclization of the substrate precedes the hydrolytic reaction. Spectroscopic analyses show that cGDPR is fluorescent and has an absorption spectrum different from both NGD+ and GDPR, providing a very convenient way for monitoring its enzymatic formation. The use of NGD+ as substrate for assaying the cyclization reaction was found to be applicable to pure enzymes as well as crude tissue extracts making it a useful diagnostic tool for distinguishing CD38-like enzymes from degradative NADases.

  10. Optimization of synthesis and quality control procedures for the preparations of 18F and 123I labelled peptides

    International Nuclear Information System (INIS)

    Archimandritis, S.C.; Potamianos, S.; Varvarigou, A.D.

    2002-01-01

    Radiolabelled biomolecules like proteins and peptides, are playing now days an important role in experimental and clinical Nuclear Medicine. Radioiodination techniques remain important, with improvements accounting for high purity, specific activity and better in vivo stability. Radioiodination using prosthetic groups is the method of choice in cases where the molecules are lacking of thyrosyl groups in their structure and are also sensitive to circulating dehalogenase enzymes. This investigation was based on the need to optimize labelling and quality control techniques for these molecules. The N-succinimidyliodobenzoate (SIB) was used in this study as the prosthetic group for the radioiodination. Optimization of SIB synthesis and modification of the protocol resulted in an improved mean yield of SIB. The combination of TLC and column chromatography using silica gel proved suitable in identifying SIB. Furthermore, the ability of SIB to couple to protein was also used to confirm the presence of SIB. In this case, SEC and ITLC-SG proved suitable to confirm protein binding of SIB. Column chromatography using silica gel containing Sep-Pak was appropriate for SIB purification. Concerning SIB conjugation to peptides, high radioiodination yields were only possible for peptides with amino-containing-side-chain amino acids. Furthermore, lysine containing peptides retained stability, at 4 deg. C, for at least 24 h and reverse phase HPLC proved the most suitable technique for assessing conjugation of SIB to peptide. The biological evaluation of the radiolabelled product was made in normal mice. SIB and SIB-peptide conjugates were tested comparatively and a number of tentative but interesting inferences were drawn. SIB and its peptide conjugates exhibited good in vivo stability as evidenced by low thyroid accumulation and were cleared via the kidneys. A time dependant decrease in the% dose per gram of tissue indicates possible adrenal metabolism of SIB and SIB

  11. GREEN SYNTHESIS OF SILVER NANO PARTICLES

    OpenAIRE

    Pallavi Sharma; Valentina V Umrania

    2017-01-01

    The research was carried out to investigate the synthesis of silver nano particles. The silver nano particles have wide tremendous application in the therapeutics, antimicrobials, diagnostics, catalysis, micro-electronics and high sensitivity biomolecular detection. Silver nano particles grow in a single-step method, at room temperature, and with no addition of external energy. The silver nanoparticles were synthesized from silver nitrate aqueous solution through a simple, ecofriendly and cos...

  12. Enhanced Water Oxidation Photoactivity of Nano-Architectured α-Fe2O3-WO3 Composite Synthesized by Single-Step Hydrothermal Method

    Science.gov (United States)

    Rahman, Gul; Joo, Oh-Shim; Chae, Sang Youn; Shah, Anwar-ul-Haq Ali; Mian, Shabeer Ahmad

    2018-04-01

    This study reports the one-step in situ synthesis of a hematite-tungsten oxide (α-Fe2O3-WO3) composite on fluorine-doped tin oxide substrate via a simple hydrothermal method. Scanning electron microscopy images indicated that the addition of tungsten (W) precursor into the reaction mixture altered the surface morphology from nanorods to nanospindles. Energy-dispersive x-ray spectroscopy analysis confirmed the presence of W content in the composite. From the ultraviolet-visible spectrum of α-Fe2O3-WO3, it was observed that absorption began at ˜ 600 nm which corresponded to the bandgap energy of ˜ 2.01 eV. The α-Fe2O3-WO3 electrode demonstrated superior performance, with water oxidation photocurrent density of 0.80 mA/cm2 (at 1.6 V vs. reversible hydrogen electrode under standard illumination conditions; AM 1.5G, 100 mW/cm2) which is 2.4 times higher than α-Fe2O3 (0.34 mA/cm2). This enhanced water oxidation performance can be attributed to the better charge separation properties in addition to the large interfacial area of small-sized particles present in the α-Fe2O3-WO3 nanocomposite film.

  13. Selective and eco-friendly procedures for the synthesis of benzimidazole derivatives. The role of the Er(OTf3 catalyst in the reaction selectivity

    Directory of Open Access Journals (Sweden)

    Natividad Herrera Cano

    2016-11-01

    Full Text Available An improved and greener protocol for the synthesis of benzimidazole derivatives, starting from o-phenylenediamine, with different aldehydes is reported. Double-condensation products were selectively obtained when Er(OTf3 was used as the catalyst in the presence of electron-rich aldehydes. Conversely, the formation of mono-condensation products was the preferred path in absence of this catalyst. One of the major advantages of these reactions was the formation of a single product, avoiding extensive isolation and purification of products, which is frequently associated with these reactions.Theoretical calculations helped to understand the different reactivity established for these reactions. Thus, we found that the charge density on the oxygen of the carbonyl group has a significant impact on the reaction pathway. For instance, electron-rich aldehydes better coordinate to the catalyst, which favours the addition of the amine group to the carbonyl group, therefore facilitating the formation of double-condensation products.Reactions with aliphatic or aromatic aldehydes were possible, without using organic solvents and in a one-pot procedure with short reaction time (2–5 min, affording single products in excellent yields (75–99%. This convenient and eco-friendly methodology offers numerous benefits with respect to other protocols reported for similar compounds.

  14. Δ(9)-Tetrahydrocannabinolic acid synthase production in Pichia pastoris enables chemical synthesis of cannabinoids.

    Science.gov (United States)

    Lange, Kerstin; Schmid, Andreas; Julsing, Mattijs K

    2015-10-10

    Δ(9)-Tetrahydrocannabinol (THC) is of increasing interest as a pharmaceutical and bioactive compound. Chemical synthesis of THC uses a laborious procedure and does not satisfy the market demand. The implementation of biocatalysts for specific synthesis steps might be beneficial for making natural product availability independent from the plant. Δ(9)-Tetrahydrocannabinolic acid synthase (THCAS) from C. sativa L. catalyzes the cyclization of cannabigerolic acid (CBGA) to Δ(9)-tetrahydrocannabinolic acid (THCA), which is non-enzymatically decarboxylated to THC. We report the preparation of THCAS in amounts sufficient for the biocatalytic production of THC(A). Active THCAS was most efficiently obtained from Pichia pastoris. THCAS was produced on a 2L bioreactor scale and the enzyme was isolated by single-step chromatography with a specific activity of 73Ug(-1)total protein. An organic/aqueous two-liquid phase setup for continuous substrate delivery facilitated in situ product removal. In addition, THCAS activity in aqueous environments lasted for only 20min whereas the presence of hexane stabilized the activity over 3h. In conclusion, production of THCAS in P. pastoris Mut(S) KM71 KE1, subsequent isolation, and its application in a two-liquid phase setup enables the synthesis of THCA on a mg scale. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. A genome-wide association study for clinical mastitis in first parity US Holstein cows using a single-step approach and a genomic matrix re-weighting procedure

    Science.gov (United States)

    Clinical mastitis (CM) is one of the health disorders with largest impacts on dairy farming profitability and animal welfare. Previous studies have consistently shown that CM is under genetic control but knowledge about regions of the genome associated with resistance to CM in US Holstein is lacking...

  16. Single-Step Fabrication Using a Phase Inversion Method of Poly(vinylidene fluoride) (PVDF) Activated Carbon Air Cathodes for Microbial Fuel Cells

    KAUST Repository

    Yang, Wulin

    2014-10-14

    Air cathodes used in microbial fuel cells (MFCs) need to have high catalytic activity for oxygen reduction, but they must also be easy to manufacture, inexpensive, and watertight. A simple one-step, phase inversion process was used here to construct an inexpensive MFC cathode using a poly(vinylidene fluoride) (PVDF) binder and an activated carbon catalyst. The phase inversion process enabled cathode preparation at room temperatures, without the need for additional heat treatment, and it produced for the first time a cathode that did not require a separate diffusion layer to prevent water leakage. MFCs using this new type of cathode produced a maximum power density of 1470 ± 50 mW m–2 with acetate as a substrate, and 230 ± 10 mW m–2 with domestic wastewater. These power densities were similar to those obtained using cathodes made using more expensive materials or more complex procedures, such as cathodes with a polytetrafluoroethylene (PTFE) binder and a poly(dimethylsiloxane) (PDMS) diffusion layer, or a Pt catalyst. Even though the PVDF cathodes did not have a diffusion layer, they withstood up to 1.22 ± 0.04 m of water head (∼12 kPa) without leakage, compared to 0.18 ± 0.02 m for cathodes made using PTFE binder and PDMS diffusion layer. The cost of PVDF and activated carbon ($3 m–2) was less than that of the stainless steel mesh current collector ($12 m–2). PVDF-based AC cathodes therefore are inexpensive, have excellent performance in terms of power and water leakage, and they can be easily manufactured using a single phase inversion process at room temperature.

  17. A new combustion route to γ-Fe2O3 synthesis

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... This synthesis which is similar to a self propagation combustion reaction, involves fewer steps, a shorter overall processing time, is a low energy reaction without the need of any explosives, and also the reaction is completed in a single step yielding magnetic iron oxide i.e. -Fe2O3. The as synthesized ...

  18. Green synthesis of Fe0 and bimetallic Fe0 for oxidative catalysis and reduction applications

    Science.gov (United States)

    A single-step green approach to the synthesis of nanoscale zero valent iron (nZVI) and nanoscale bimetallic (Fe0/Pd) particles using tea (Camellia sinensis) polyphenols is described. The expedient reaction between polyphenols and ferric chloride (FeCl3) occurs within a minute at ...

  19. A Green, Enantioselective Synthesis of Warfarin for the Undergraduate Organic Laboratory

    Science.gov (United States)

    Wong, Terence C.; Sultana, Camille M.; Vosburg, David A.

    2010-01-01

    The enantioselective synthesis of drugs is of fundamental importance in the pharmaceutical industry. In this experiment, students synthesize either enantiomer of warfarin, a widely used anticoagulant, in a single step from inexpensive starting materials. Stereoselectivity is induced by a commercial organocatalyst, ("R","R")- or…

  20. Fabrication of targets for transmutation of americium : synthesis of inertial matrix by sol-gel method. Procedure study on the infiltration of a radioactive solutions

    International Nuclear Information System (INIS)

    Fernandez Carretero, A.

    2002-01-01

    Transmutation and incineration are innovative options in the management and disposal of fission products and actinides. nevertheless, the fabrication of targets for transmutation and incineration of actinides and fission products require a reconsideration of conventional processes (mechanical blending) and the development of new procedures compatible with the high activity of these materials. This work presents th R and D of a new fabrication method called INRAM (Infiltration of Radioactive Materials) based on the infiltration of an actinide solution in a porous non radiotoxic material in the form of a pellet (up to 12% An), or beads (up to 40% An) produced by sol-gel. The first method have been used for the fabrication of spinel (MgAl 2 O 4 ) targets containing 11% Am, which have been irradiated in HFR-Petten (358.4 full power days). Post-test burn-up calculations showed that at the end of the irradiation the initial Am-241 concentration was reduced to 4%. The fraction of the initial americum atoms that have been fissioned is 28%. The main advantage of the INRAM method is that matrices with low or zero activity can be fabricated and formed into the required shape in an unshielded facility. This method offers other advantages over conventional ones, such as the active wastes are reduced, is easy to automate, adoptable to telemanipulation and dust free, which facilitate operator intervention and minimise radiation exposure to the personal. In addition, the infiltrant needs only be present in liquid form, i. e. it could be transferred directly from the reprocessing plant for fabrication into targets without conversion into-solid form. In order to optimise the infiltration process in depth investigations of all important process parameters, e. g. infiltration kinetics and metal (pu, Am) concentration in the feed solution, and also on extensive study or powder metallurgy parameters for the preparation of high quality fuel pellets with a high density, have been made. In

  1. Rapid single-step methods for detection of two immune defence gene polymorphisms: the myeloperoxidase (MPO) G-129A and the Fc gamma receptor 2A (FCGR2A) H/R131

    DEFF Research Database (Denmark)

    Mølle, Ingolf; Melsvik, Dorte; Østergaard, Mette

    2007-01-01

    . formalin-fixed paraffin-embedded tissue specimens. Here we describe two new single-step methods for rapid and sensitive analysis of: 1. The G-129A myeloperoxidase (MPO) promoter polymorphism, which affects the amount of myeloperoxidase in neutrophils. 2. The Fc gamma receptor 2A (FCGR2A)-H/R131......Polymorphisms of immune defence genes may act as disease modifiers and are studied by many researchers. A conclusive analysis of the impact of genetic variations typically requires a large number of sample specimens, and in retrospective studies this may include samples of reduced quality, e.g...... polymorphism, which is critical to the binding of IgG2 immune complexes to phagocytes. Udgivelsesdato: 2007-Jul-31...

  2. Elucidating the structure-property relationships of donor-π-acceptor dyes for dye-sensitized solar cells (DSSCs) through rapid library synthesis by a one-pot procedure.

    Science.gov (United States)

    Fuse, Shinichiro; Sugiyama, Sakae; Maitani, Masato M; Wada, Yuji; Ogomi, Yuhei; Hayase, Shuzi; Katoh, Ryuzi; Kaiho, Tatsuo; Takahashi, Takashi

    2014-08-18

    The creation of organic dyes with excellent high power conversion efficiency (PCE) is important for the further improvement of dye-sensitized solar cells. We wish to describe the rapid synthesis of a 112-membered donor-π-acceptor dye library by a one-pot procedure, evaluation of PCEs, and elucidation of structure-property relationships. No obvious correlations between ε, and the η were observed, whereas the HOMO and LUMO levels of the dyes were critical for η. The dyes with a more positive E(HOMO), and with an E(LUMO)dyes; nevertheless, that was not sufficient for identifying the best combination of donor, π, and acceptor blocks. Combinatorial synthesis and evaluation was important for identifying the best dye. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Synthesis procedure for routine production of 2-[{sup 18}F]fluoro-3-(2(S)-azetidinylmethoxy)pyridine (2-[{sup 18}F]F-A-85380)

    Energy Technology Data Exchange (ETDEWEB)

    Schildan, Andreas [Department of Nuclear Medicine, University of Leipzig, 04103 Leipzig (Germany)], E-mail: andreas.schildan@medizin.uni-leipzig.de; Patt, Marianne; Sabri, Osama [Department of Nuclear Medicine, University of Leipzig, 04103 Leipzig (Germany)

    2007-11-15

    2-[{sup 18}F]Fluoro-3-(2(S)-azetidinylmethoxy)pyridine (2-[{sup 18}F]F-A-85380) was among the first subtype selective radioligands to visualise the in vivo distribution of {alpha}4{beta}2-containing neuronal nicotinic acetylcholine receptors (nAChRs) in human brain. We developed a one-pot synthesis for the preparation of 2-[{sup 18}F]F-A-85380 in a commercially available TRACERlab FX{sub F-N} synthesis module. The synthesis comprises a nucleophilic substitution followed by hydrolysis of a t-butyloxycarbonyl (BOC)-protected intermediate. After formulation for intravenous application up to 20 GBq 2-[{sup 18}F]F-A-85380 were produced from a starting activity of 100 GBq [{sup 18}F]fluoride in 60 min with a specific activity of about 4.10{sup 5} GBq/mmol and a mean radiochemical purity of more than 99%.

  4. Synthesis of Mechanisms

    DEFF Research Database (Denmark)

    Hansen, John Michael

    1999-01-01

    These notes describe an automated procedure for analysis and synthesis of mechanisms. The analysis method is based on the body coordinate formulation, and the synthesis is based on applying optimization methods, used to minimize the difference between an actual and a desired behaviour......These notes describe an automated procedure for analysis and synthesis of mechanisms. The analysis method is based on the body coordinate formulation, and the synthesis is based on applying optimization methods, used to minimize the difference between an actual and a desired behaviour...

  5. Tin-free visible light photoredox catalysed cyclisation of enamides as a mild procedure for the synthesis of γ-lactams

    KAUST Repository

    Fava, Eleonora

    2016-07-13

    The first visible light mediated tin-free cyclisation of α-chloroenamides leading to the synthesis of substituted γ-lactams with excellent stereoselectivity is reported. The protocol employs the single-electron reduction of activated C–Cl bonds, which are typically inert towards reduction.

  6. An Efficient Procedure Based on a MW-Assisted Horner–Wadsworth-Emmons Reaction for the Synthesis of (Z-3,3-Trisubstituted-a,b-unsaturated Esters

    Directory of Open Access Journals (Sweden)

    Ornella Azzolina

    2010-08-01

    Full Text Available A microwave-assisted HWE olefination process of readily accessible aryl-alkyl ketones has been developed to provide a rapid access to (Z-3,3-trisubstituted-α,β-unsaturated methyl esters, key building blocks for the synthesis of biologically active compounds.

  7. Fast-Rate Capable Electrode Material with Higher Energy Density than LiFePO4: 4.2V LiVPO4F Synthesized by Scalable Single-Step Solid-State Reaction.

    Science.gov (United States)

    Kim, Minkyung; Lee, Seongsu; Kang, Byoungwoo

    2016-03-01

    Use of compounds that contain fluorine (F) as electrode materials in lithium ion batteries has been considered, but synthesizing single-phase samples of these compounds is a difficult task. Here, it is demonstrated that a simple scalable single-step solid-state process with additional fluorine source can obtain highly pure LiVPO 4 F. The resulting material with submicron particles achieves very high rate capability ≈100 mAh g -1 at 60 C-rate (1-min discharge) and even at 200 C-rate (18 s discharge). It retains superior capacity, ≈120 mAh g -1 at 10 C charge/10 C discharge rate (6-min) for 500 cycles with >95% retention efficiency. Furthermore, LiVPO 4 F shows low polarization even at high rates leading to higher operating potential >3.45 V (≈3.6 V at 60 C-rate), so it achieves high energy density. It is demonstrated for the first time that highly pure LiVPO 4 F can achieve high power capability comparable to LiFePO 4 and much higher energy density (≈521 Wh g -1 at 20 C-rate) than LiFePO 4 even without nanostructured particles. LiVPO 4 F can be a real substitute of LiFePO 4.

  8. A Single-Step Hydrothermal Route to 3D Hierarchical Cu2O/CuO/rGO Nanosheets as High-Performance Anode of Lithium-Ion Batteries.

    Science.gov (United States)

    Wu, Songhao; Fu, Gaoliang; Lv, Weiqiang; Wei, Jiake; Chen, Wenjin; Yi, Huqiang; Gu, Meng; Bai, Xuedong; Zhu, Liang; Tan, Chao; Liang, Yachun; Zhu, Gaolong; He, Jiarui; Wang, Xinqiang; Zhang, Kelvin H L; Xiong, Jie; He, Weidong

    2018-02-01

    As anodes of Li-ion batteries, copper oxides (CuO) have a high theoretical specific capacity (674 mA h g -1 ) but own poor cyclic stability owing to the large volume expansion and low conductivity in charges/discharges. Incorporating reduced graphene oxide (rGO) into CuO anodes with conventional methods fails to build robust interaction between rGO and CuO to efficiently improve the overall anode performance. Here, Cu 2 O/CuO/reduced graphene oxides (Cu 2 O/CuO/rGO) with a 3D hierarchical nanostructure are synthesized with a facile, single-step hydrothermal method. The Cu 2 O/CuO/rGO anode exhibits remarkable cyclic and high-rate performances, and particularly the anode with 25 wt% rGO owns the best performance among all samples, delivering a record capacity of 550 mA h g -1 at 0.5 C after 100 cycles. The pronounced performances are attributed to the highly efficient charge transfer in CuO nanosheets encapsulated in rGO network and the mitigated volume expansion of the anode owing to its robust 3D hierarchical nanostructure. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Some Calculated (p,α Cross-Sections Using the Alpha Particle Knock-On and Triton Pick-Up Reaction Mechanisms: An Optimisation of the Single-Step Feshbach–Kerman–Koonin (FKK Theory

    Directory of Open Access Journals (Sweden)

    Felix S. Olise

    2016-04-01

    Full Text Available The Feshbach–Kerman–Koonin (FKK multi-step direct (MSD theory of pre-equilibrium reactions has been used to compute the single-step cross-sections for some (p,α reactions using the knock-on and pick-up reaction mechanisms at two incident proton energies. For the knock-on mechanism, the reaction was assumed to have taken place by the direct ejection of a preformed alpha cluster in a shell-model state of the target. But the reaction was assumed to have taken place by the pick-up of a preformed triton cluster (also bound in a shell-model state of the target core by the incident proton for the pick-up mechanism. The Yukawa forms of potential were used for the proton-alpha (for the knock-on process and proton-triton (for the pick-up process interaction and several parameter sets for the proton and alpha-particle optical potentials. The calculated cross-sections for both mechanisms gave satisfactory fits to the experimental data. Furthermore, it has been shown that some combinations of the calculated distorted wave Born approximation cross-sections for the two reaction mechanisms in the FKK MSD theory are able to give better fits to the experimental data, especially in terms of range of agreement. In addition, the theory has been observed to be valid over a wider range of energy.

  10. Rapid and precise determination of Sr and Nd isotopic ratios in geological samples from the same filament loading by thermal ionization mass spectrometry employing a single-step separation scheme.

    Science.gov (United States)

    Li, Chao-Feng; Li, Xian-Hua; Li, Qiu-Li; Guo, Jing-Hui; Li, Xiang-Hui; Yang, Yue-Heng

    2012-05-21

    Thermal ionization mass spectrometry (TIMS) offers the excellent precision and accuracy of the Sr and Nd isotopic ratio analysis for geological samples, but this method is labour intensive, expensive and time-consuming. In this study, a new analytical protocol by TIMS is presented that aims at improving analytical efficiency and cutting down experimental cost. Using the single-step cation exchange resin technique, mixed Sr and rare earth elements (REEs) fractions were separated from matrix and evaporated to dryness. Afterwards, mixed Sr+REEs fractions were dissolved and loaded onto the same Re filament using 1 μL of 2 M HCl. Then, Sr and Nd were sequentially measured without venting using TIMS. In contrast to conventional TIMS methods, the merits of this analytical protocol are its cost- and time-saving adaptations. The applicability of our method is evaluated by replicated measurements of (87)Sr/(86)Sr and (143)Nd/(144)Nd for nine international silicate rock reference materials, spanning a wide range of bulk compositions. The typical internal precision in this study is ca. 0.001% (RSE) for (87)Sr/(86)Sr and (143)Nd/(144)Nd; the analytical results obtained for these standard rocks show a good agreement with reported values, indicating the effectiveness of the proposed method. Copyright © 2012 Elsevier B.V. All rights reserved.

  11. Single step purification and characterization of a thermostable and calcium independent α-amylase from Bacillus amyloliquifaciens TSWK1-1 isolated from Tulsi Shyam hot spring reservoir, Gujarat (India).

    Science.gov (United States)

    Kikani, B A; Singh, S P

    2011-05-01

    A thermophilic bacteria, identified and designated as Bacillus amyloliquifaciens TSWK1-1 (16S rRNA gene sequence, GenBank: GQ121033), was isolated from a hot water reservoir located at Tulsi Shyam, Gujarat, India. The optimum temperature and pH for amylase production were 50 °C and 7.0, respectively. The crude enzyme was partially purified by ammonium sulphate fractionation followed by dialysis. However, single step purification was achieved on Phenyl Sepharose 6FF affinity column with 45.71% yield, 8000 U/mg specific activity and 13.33 fold purification. The molecular weight of the purified α-amylase was 43 kD. The optimal temperature and pH for amylase activity were 70 °C and 7.0, respectively; however, the purified amylase was stable at broad temperature and pH range. The purified amylase did not require Ca(++) and K(+); however, it was moderately affected by Mg(++) and Cu(++) and significantly inhibited by Na(+) and Fe(++). The amylase was highly thermostable and remained active for 24h at 60 °C, for 12h at 70 °C and up to 3h even at 90 °C. Other unique features of the enzyme were calcium independent nature and resistance against chemical denaturation by Urea and Guanidine-HCl. The data on the enzymatic stability at different levels of purity would add significantly to the knowledge of amylases. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Hepatitis B virus DNA quantification with the three-in-one (3io) method allows accurate single-step differentiation of total HBV DNA and cccDNA in biopsy-size liver samples.

    Science.gov (United States)

    Taranta, Andrzej; Tien Sy, Bui; Zacher, Behrend Johan; Rogalska-Taranta, Magdalena; Manns, Michael Peter; Bock, Claus Thomas; Wursthorn, Karsten

    2014-08-01

    Hepatitis B virus (HBV) replicates via reverse transcription converting its partially double stranded genome into the covalently closed circular DNA (cccDNA). The long-lasting cccDNA serves as a replication intermediate in the nuclei of hepatocytes. It is an excellent, though evasive, parameter for monitoring the course of liver disease and treatment efficiency. To develop and test a new approach for HBV DNA quantification in serum and small-size liver samples. The p3io plasmid contains an HBV fragment and human β-actin gene (hACTB) as a standard. Respective TaqMan probes were labeled with different fluorescent dyes. A triplex real-time PCR for simultaneous quantification of total HBV DNA, cccDNA and hACTB could be established. Three-in-one method allows simultaneous analysis of 3 targets with a lower limit of quantification of 48 copies per 20 μl PCR reaction and a wide range of linearity (R(2)>0.99, pDNA samples from HBV infected patients. Total HBV DNA and cccDNA could be quantified in 32 and 22 of 33 FFPE preserved liver specimens, respectively. Total HBV DNA concentrations quantified by the 3io method remained comparable with Cobas TaqMan HBV Test v2.0. The three-in-one protocol allows the single step quantification of viral DNA in samples from different sources. Therefore lower sample input, faster data acquisition, a lowered error and significantly lower costs are the advantages of the method. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. The Influence of Synthesis Procedure on the Microstructure and Thermoelectric Properties of p-Type Skutterudite Ce0.6Fe2Co2Sb12

    Science.gov (United States)

    Sesselmann, A.; Skomedal, G.; Middleton, H.; Müller, E.

    2016-03-01

    We have investigated p-type skutterudite samples with the nominal composition Ce0.6Co2Fe2Sb12 synthesized from elementary constituents by gas atomization and conventional melting, and also those synthesized from ternary and binary phases such as Fe x Co1- x Sb2 and CeSb2, respectively, which were mixed and subsequently ball-milled. We conducted measurements of the temperature-dependent transport properties (Seebeck coefficient, thermal/electrical conductivity) and carried out scanning electron microscope analysis, electron probe micro-analysis and powder x-ray diffraction to obtain information about microstructure and elementary distribution of the phases. We show that the presented synthesis methods each possess particular strengths but ultimately, however, lead to different final compositions of the skutterudite phase and secondary phases, which significantly influence the thermoelectric properties of the material. Material prepared using an educt method gave the best thermoelectric properties with a peak ZT of 0.7. Furthermore, we show that even an apparent homogeneous skutterudite area within the material exhibits varying stoichiometry in each grain even though they conform to the solubility range of cerium in this p-type skutterudite. Moreover, we show that marcasite is preferred as an educt over the arsenopyrite phase and discuss the formation of the p-type skutterudite phase with these synthesis techniques.

  14. Concise synthesis of the hasubanan alkaloid (±)-cepharatine A using a Suzuki coupling reaction to effect o,p-phenolic coupling.

    Science.gov (United States)

    Magnus, Philip; Seipp, Charles

    2013-09-20

    Suzuki coupling of 10 and 11 resulted in 9, which was O-alkylated to provide 12. Treatment of 12 with CsF in DMF resulted in the formation of the completed core structure 13 in a single step. Reductive amination of 13 completed the synthesis of (±)-cepharatine A, 4.

  15. One-Pot Eco-Safe Saccharin-Catalyzed Procedure for Expedient and Convenient Synthesis of Dihydropyrano[2,3-c]pyrazole, Tetrahydrobenzo[b]pyran and Pyrano[2,3-d]pyrimidinone Scaffolds as a Green and Versatile Catalyst

    Directory of Open Access Journals (Sweden)

    Farzaneh Mohamadpour

    2018-02-01

    Full Text Available A green and facile saccharin-catalyzed procedure is developed for the one-pot convenient synthesis of dihydropyrano[2,3-c]pyrazole, tetrahydrobenzo[b]pyran and pyrano[2,3-d]pyrimidinone scaffolds via multi-component tandem Knoevenagel cyclocondensation reaction. This procedure has the chief advantages of green, inexpensive and readily available catalyst, high atom-economy, high to quantitative yields and the reaction procedure is mild and involves facile workup procedure to obtain the desired products in short reaction times.

  16. One-step synthesis of pyridines and dihydropyridines in a continuous flow microwave reactor

    Directory of Open Access Journals (Sweden)

    Mark C. Bagley

    2013-09-01

    Full Text Available The Bohlmann–Rahtz pyridine synthesis and the Hantzsch dihydropyridine synthesis can be carried out in a microwave flow reactor or using a conductive heating flow platform for the continuous processing of material. In the Bohlmann–Rahtz reaction, the use of a Brønsted acid catalyst allows Michael addition and cyclodehydration to be carried out in a single step without isolation of intermediates to give the corresponding trisubstituted pyridine as a single regioisomer in good yield. Furthermore, 3-substituted propargyl aldehydes undergo Hantzsch dihydropyridine synthesis in preference to Bohlmann–Rahtz reaction in a very high yielding process that is readily transferred to continuous flow processing.

  17. Development of a concise, asymmetric synthesis of a smoothened receptor (SMO) inhibitor: enzymatic transamination of a 4-piperidinone with dynamic kinetic resolution.

    Science.gov (United States)

    Peng, Zhihui; Wong, John W; Hansen, Eric C; Puchlopek-Dermenci, Angela L A; Clarke, Hugh J

    2014-02-07

    A concise, asymmetric synthesis of a smoothened receptor inhibitor (1) is described. The synthesis features an enzymatic transamination with concurrent dynamic kinetic resolution (DKR) of a 4-piperidone (4) to establish the two stereogenic centers required in a single step. This efficient reaction affords the desired anti amine (3) in >10:1 dr and >99% ee. The title compound is prepared in only five steps with 40% overall yield.

  18. Fe-Containing Zeolites for NH3-SCR of NOx: Effect of Structure, Synthesis Procedure, and Chemical Composition on Catalytic Performance and Stability.

    Science.gov (United States)

    Martín, Nuria; Vennestrøm, Peter N R; Thøgersen, Joakim R; Moliner, Manuel; Corma, Avelino

    2017-09-27

    The direct preparation of different iron-containing Beta and CHA zeolites has been attempted under diverse synthesis conditions, including in alkaline and fluoride media, to evaluate the influence of their physicochemical properties on the selective catalytic reduction (SCR) of NO x using NH 3 as reductant. Of the different Fe-Beta zeolites, the sample prepared in the absence of alkali cations with a Si/Al ratio of around 13 showed high NO conversion values (>90 %). However, this catalyst suffered from severe deactivation when aged at high temperatures in the presence of steam. The preparation of more hydrophobic Fe-Beta zeolites did not improve the resistance of the catalyst against steam. In contrast, Fe-CHA zeolites prepared by a one-pot method under alkaline conditions with a Si/Al ratio of around 13 by using N,N,N-trimethyladamantylammonium as template not only showed excellent catalytic activity but also high hydrothermal stability, especially when sodium cations were selectively removed. Moreover, the Fe-CHA material synthesized by using the less expensive tetraethylammonium template also resulted in an active and hydrothermally stable catalyst. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Synthesis and solid state properties of the 4-naphthyloxymethyl-2,2-dioxo-1,3,2-dioxathiolane, cyclic sulfate not available through sulfite oxidation procedure

    Science.gov (United States)

    Bredikhina, Zemfira A.; Gubaidullin, Aidar T.; Bredikhin, Alexander A.

    2010-12-01

    The chiral adrenoblocker propranolol precursor 4-naphthyloxymethyl-2,2-dioxo-1,3,2-dioxathiolane, 2, was obtained in racemic and scalemic form. It was found that sulfates 2 are practically unavailable through the standard Ru-catalyzed sulfite oxidation procedure, but could be obtained by the direct action of SO 2Cl 2 on the corresponding vicinal diols 3. The published properties of the sulfate were corrected. Thermodynamic characteristics and binary melting phase diagram were evaluated for compound 2 by DSC. The crystal structure of rac- and scal- 2 was established by single crystal X-ray analysis and the absolute configuration of scal- 2 was established by the Flack method. The flexible nature of the sulfur-containing cycle, and the sensitivity of the compound conformation to homo- and heterochiral crystal environment was demonstrated.

  20. Quantization Procedures

    International Nuclear Information System (INIS)

    Cabrera, J. A.; Martin, R.

    1976-01-01

    We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs

  1. Synthesis of ion-exchange membranes by radiation-induced multiple grafting of methyl α,β,β-trifluoroacrylate

    International Nuclear Information System (INIS)

    Omichi, H.; Okamoto, J.

    1982-01-01

    Methyl α,β,β-trifluoroacrylate (MTFA) was grafted onto polymer films with the multiple grafting technique initiated by γ-rays: the yields were similar to those of the single-step grafting procedure with any irradiation dose. Grafted polymer obtained in the single-step experiments were distributed mainly near the film surface, whereas graft polymer from the multiple grafting experiments were distributed uniformly in the film at graft yields greater than 20%. The electric resistance of the hydrolyzed multiple graft polymer film in a 2N NaOH solution was much lower than that of one-step graft film at the same graft yield

  2. Optimization of synthesis and quality control procedures for the preparation of 18F and 123I labelled peptides for nuclear medicine

    International Nuclear Information System (INIS)

    2002-09-01

    The general scope of this CRP focused on the optimization of syntheses, quality control, in vitro and in vivo evaluation of 18 F and 123 I radiopharmaceuticals based on peptides with known or anticipated clinical potential. Selective labelling procedures using prosthetic groups were applied to both fluorine and iodine. Studies included investigation on the fate of the label, stability in vivo, biodistribution and pharmacokinetic studies in rodents and in cell culture. With respect to 123 I, the work aimed at developing a simplified labelling kit using solid state systems. The first Research Co-ordination Meeting (RCM) that was held in August 1997 took up and decided on the criteria for selecting the peptides and agreed upon a set of recommended laboratory protocols for the CRP participants to follow and further optimize. Eight scientists from reputed laboratories from Argentina, Brazil, China, Germany, Greece, the Islamic Republic of Iran, Saudi Arabia and the United States of America participated in the CRP. Three RCMs were held where the participants presented their scientific results: August 1997 in Sao Paulo, Brazil, April 1999 in Athens, Greece, and November 2000 in Shanghai, People's Republic of China. Reports describing the research work of all participants are included herein. Each of the report has been indexed separately

  3. Civil Procedure.

    Science.gov (United States)

    Byer, Robert

    1997-01-01

    Briefly reviews the historical development of civil procedure (the rules that dictate how a civil case can proceed through the courts) and identifies some of its main components. Discusses procedures such as subject matter jurisdiction, personal jurisdiction, venue, discovery, motions practice, pleadings, pretrial conference, and trials. (MJP)

  4. Muscle activation in healthy subjects during single step up [Aktivace svalů u zdravých osob při nákroku na schod

    Directory of Open Access Journals (Sweden)

    Jaroslav Opavský

    2010-03-01

    Full Text Available BACKGROUND: The single step up is an integral movement performance for functional mobility and activities of daily living. During this activity the body has to be able to keep its balance and maintain a stable upright posture for performing voluntary movement. For this purpose the central nervous system creates different motor programs specific to the task. A motor programme is believed to contain the pre-programmed sequence of muscle activity prior to the initiation of the task, and includes both the muscle activity for the task, as well as postural muscle activity. OBJECTIVE: The aim of this paper was to examine the sequence of muscular activation, and to determine the timing of the involvement of selected trunk and leg muscles whilst stepping up. The further aim was to find out the most common muscle patterns in this model of motor activity in healthy subjects. METHODS: The bilateral electromyographic (EMG signal from the gluteus maximus, biceps femoris and erectores spinae muscles were recorded using surface electromyography. The visual record of the step up performance was registered simultaneously with surface electromyography. The tested group consisted of 16 healthy (5 men with an average age of 23.6, 11 women with an average age of 23.2. They were monitored during the motor task – the step up task, that is which was performed by the dominant leg. The subject stood facing the step (height of the step = 20 cm. Upon request he/she stepped up with the right leg at a spontaneous speed. The motor task was completed by bringing the left leg up onto the step. RESULTS: During this task, we registered the activation of the right erector spinae muscle, right biceps femoris muscle, left erector spinae muscle and left biceps femoris muscle before the beginning of the visually recognizable movement. The most frequently registered pattern of activation on the side that carried out the step was: right biceps femoris muscle → right erector spinae

  5. Local Synthesis of Carbon Nanotubes in Silicon Microsystems: The Effect of Temperature Distribution on Growth Structure

    Directory of Open Access Journals (Sweden)

    Knut E. Aasmundtveit

    2013-07-01

    Full Text Available Local synthesis and direct integration of carbon nanotubes (CNTs into microsystems is a promising method for producing CNT-based devices in a single step, low-cost, and wafer-level, CMOS/MEMS-compatible process. In this report, the structure of the locally grown CNTs are studied by transmission imaging in scanning electron microscopy—S(TEM. The characterization is performed directly on the microsystem, without any post-synthesis processing required. The results show an effect of temperature on the structure of CNTs: high temperature favors thin and regular structures, whereas low temperature favors “bamboo-like” structures.

  6. Photodigitizing procedures

    Science.gov (United States)

    Kilgore, P. D.; Gottbrath, J. H.

    1984-02-01

    This report documents procedures and programs for efficiently running the Photo Digitizing System at the Naval Biodynamics Laboratory. Procedures have been tested and have been found to be effective. Any future acquisitions of programs or changes to current programs should be incorporated in these procedures. On-going research programs use high speed instrumentation cameras to record the motion of test subjects during biodynamic experiments. The films are digitized and the 3-dimensional motion is reconstructed and analyzed. Experimental research is performed to determine the effects of aircraft crashes, ship motion, vibration, aircraft ejection and parachute opening forces on the health and performance of Navy personnel.

  7. Oculoplastic procedures

    Science.gov (United States)

    ... procedures may be done on the: Eyelids Eye sockets Eyebrows Cheeks Tear ducts Face or forehead These ... eyes. These lenses help protect your eyes and shield them from the bright lights of the surgical ...

  8. Synthesis of and characterization of lithium ceramic electrolytes

    Science.gov (United States)

    Rangasamy, Ezhiylmurugan

    The depleting fossil fuel reserves, rising oil prices and the need for reduction in CO2 emissions have created an unprecedented impetus for vehicle electrification. Lithium batteries have the highest energy density of the various available battery technologies. They are the most promising battery candidate to enable Hybrid Electric Vehicles (HEVs) and Plug-in Electric Vehicles (PEVs). However, current Li-ion current battery technology is costly and requires a significant increase in energy density to achieve range comparable to conventional gasoline-powered vehicles. Advanced lithium battery technologies such as Li-S and Li-O2 could potentially offer significant improvements in energy density to address the limitations with current Li-ion technology. The implementation of these advanced battery technologies, however, has been limited by the lack of electrolyte technology to enable the use of metallic lithium anodes. Thus, there is a clear and compelling need to develop new electrolyte materials that exhibit the unique combination of fast ion conductivity, stability against lithium, air and moisture. Lithium Lanthanum Titanium Oxide (LLTO) and Lithium Lanthanum Zirconium Oxide (LLZO) have been identified as viable candidates for the advanced battery technologies. However, issues concerning phase purity and densification warrant developing new and novel synthetic techniques. A single step procedure has been developed for the synthesis of Lithium Lanthanum Titanium Oxide (LLTO) membranes. The single step procedure combines phase formation and densification of the ceramic electrolyte in a hot pressing technique. The effect of synthetic technique on relative density, grain structure and ionic conductivity of the LLTO membranes has been explored in detail. The critical step of synthesizing cubic Lithium Lanthanum Zirconium Oxide (LLZO) has been systematically studied through the controlled doping of Al, using X-Ray Diffraction (XRD) analysis. Effects of Li and Al

  9. Synthesis de 1-dotriacotanol

    International Nuclear Information System (INIS)

    Hernandez, L.; Gonzalez, J.C.

    1996-01-01

    In order to prepare isotopic labeled long chain aliphatic primary alcohol's, the synthesis overall yielding and chemical purity of 1-dotriacotanol were 41% and 98%, respectively. This procedure is very useful for carbon-14 and tritium labeling at Beta position of saturated fatty alcohol's

  10. Rapid phase synthesis of nanocrystalline cobalt ferrite

    Energy Technology Data Exchange (ETDEWEB)

    Shanmugavel, T., E-mail: shanmugavelnano@gmail.com [Department of Physics, Paavai Engineering College, Namakkal -637018 (India); Raj, S. Gokul [Department of Physics, Vel Tech University, Avadi, Chennai - 600 062 (India); Rajarajan, G. [Department of Physics, Mahendra Engineering College, Mallasamudram -637503 (India); Kumar, G. Ramesh [Department of Physics, University College of Engineering, Anna University Chennai, Arni- 632317 (India)

    2014-04-24

    Synthesis of single phase nanocrystalline Cobalt Ferrite (CoFe{sub 2}O{sub 4}) was achieved by single step autocombustion technique with the use of citric acid as a chelating agent in mono proportion with metal. Specimens prepared with this method showed significantly higher initial permeability's than with the conventional process. Single phase nanocrystalline cobalt ferrites were formed at very low temperature. Surface morphology identification were carried out by transmission electron microscopy (TEM) analysis. The average grain size and density at low temperature increased gradually with increasing the temperature. The single phase formation is confirmed through powder X-ray diffraction analysis. Magnetization measurements were obtained at room temperature by using a vibrating sample magnetometer (VSM), which showed that the calcined samples exhibited typical magnetic behaviors. Temperature dependent magnetization results showed improved behavior for the nanocrystalline form of cobalt ferrite when compared to the bulk nature of materials synthesized by other methods.

  11. Environmental procedures

    International Nuclear Information System (INIS)

    1992-01-01

    The European Bank has pledged in its Agreement to place environmental management at the forefront of its operations to promote sustainable economic development in central and eastern Europe. The Bank's environmental policy is set out in the document titled, Environmental Management: The Bank's Policy Approach. This document, Environmental Procedures, presents the procedures which the European Bank has adopted to implement this policy approach with respect to its operations. The environmental procedures aim to: ensure that throughout the project approval process, those in positions of responsibility for approving projects are aware of the environmental implications of the project, and can take these into account when making decisions; avoid potential liabilities that could undermine the success of a project for its sponsors and the Bank; ensure that environmental costs are estimated along with other costs and liabilities; and identify opportunities for environmental enhancement associated with projects. The review of environmental aspects of projects is conducted by many Bank staff members throughout the project's life. This document defines the responsibilities of the people and groups involved in implementing the environmental procedures. Annexes contain Environmental Management: The Bank's Policy Approach, examples of environmental documentation for the project file and other ancillary information

  12. Distributed PROMPT-LTL Synthesis

    Directory of Open Access Journals (Sweden)

    Swen Jacobs

    2016-09-01

    Full Text Available We consider the synthesis of distributed implementations for specifications in Prompt Linear Temporal Logic (PROMPT-LTL, which extends LTL by temporal operators equipped with parameters that bound their scope. For single process synthesis it is well-established that such parametric extensions do not increase worst-case complexities. For synchronous systems, we show that, despite being more powerful, the distributed realizability problem for PROMPT-LTL is not harder than its LTL counterpart. For asynchronous systems we have to consider an assume-guarantee synthesis problem, as we have to express scheduling assumptions. As asynchronous distributed synthesis is already undecidable for LTL, we give a semi-decision procedure for the PROMPT-LTL assume-guarantee synthesis problem based on bounded synthesis.

  13. Radiochemical procedures

    International Nuclear Information System (INIS)

    Lyon, W.S.

    1982-01-01

    The modern counting instrumentation has largely obviated the need for separation processes in the radiochemical analysis but problems in low-level radioactivity measurement, environmental-type analyses, and special situations caused in the last years a renaissance of the need for separation techniques. Most of the radiochemical procedures, based on the classic works of the Manhattan Project chemists of the 1940's, were published in the National Nuclear Energy Series (NNES). Improvements such as new solvent extraction and ion exchange separations have been added to these methods throughout the years. Recently the Los Alamos Group have reissued their collected Radiochemical Procedures containing a short summary and review of basic inorganic chemistry - 'Chemistry of the Elements on the Basis of Electronic Configuration'. (A.L.)

  14. On fabrication procedures of Li-ion conducting garnets

    Energy Technology Data Exchange (ETDEWEB)

    Hanc, Emil [The Mineral and Energy Economy Research Institute, Polish Academy of Sciences, ul. Wybickiego 7, 31-261 Kraków (Poland); Zając, Wojciech, E-mail: wojciech.zajac@agh.edu.pl [AGH University of Science and Technology, Faculty of Energy and Fuels, al. Mickiewicza 30, 30-059 Kraków (Poland); Lu, Li; Yan, Binggong; Kotobuki, Masashi [Materials Science Group, Department of Mechanical Engineering, National University of Singapore (Singapore); Ziąbka, Magdalena [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. Mickiewicza 30, 30-059 Kraków (Poland); Molenda, Janina [AGH University of Science and Technology, Faculty of Energy and Fuels, al. Mickiewicza 30, 30-059 Kraków (Poland)

    2017-04-15

    Ceramic oxides exhibiting high lithium-ion mobility at room temperature receive broad attention as candidate electrolytes for lithium batteries. Lithium-stuffed garnets from the Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} group seem to be especially promising because of their high ionic conductivity at room temperature and their electrochemical stability. In this work, we discuss factors that affect formation of the garnet in its bulk form or in the form of thick and thin films. We demonstrate that zinc oxide can be applied as a sintering aid that facilitate the formation of the highly conducting cubic Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} garnet phase in a single-step sintering procedure. Based on our experience with the single-step sintering experiments, we successfully fabricated a thick-film membrane consisting of a garnet solid electrolyte using the tape casting technique. In order to reduce the thickness of the electrolyte even further we investigated the fabrication of a thin-film Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} electrolyte by means of the pulsed laser deposition technique.

  15. On fabrication procedures of Li-ion conducting garnets

    Science.gov (United States)

    Hanc, Emil; Zając, Wojciech; Lu, Li; Yan, Binggong; Kotobuki, Masashi; Ziąbka, Magdalena; Molenda, Janina

    2017-04-01

    Ceramic oxides exhibiting high lithium-ion mobility at room temperature receive broad attention as candidate electrolytes for lithium batteries. Lithium-stuffed garnets from the Li7La3Zr2O12 group seem to be especially promising because of their high ionic conductivity at room temperature and their electrochemical stability. In this work, we discuss factors that affect formation of the garnet in its bulk form or in the form of thick and thin films. We demonstrate that zinc oxide can be applied as a sintering aid that facilitate the formation of the highly conducting cubic Li7La3Zr2O12 garnet phase in a single-step sintering procedure. Based on our experience with the single-step sintering experiments, we successfully fabricated a thick-film membrane consisting of a garnet solid electrolyte using the tape casting technique. In order to reduce the thickness of the electrolyte even further we investigated the fabrication of a thin-film Li7La3Zr2O12 electrolyte by means of the pulsed laser deposition technique.

  16. Evaluation of single-step steam pyrolysis-activated carbons

    African Journals Online (AJOL)

    Mgina

    415m2/g), iodine number (52.2 to 100.3 g/100g), solubility (2 to 5%) and pH (8.34 to 9.76), all the four investigated agro- forestry wastes – AS, MS, PC and PS – gave ACs of good quality by simple steam pyrolysis process. With the exception of. MS, all the other raw materials gave relatively high yields of activated carbon, up.

  17. Single-step electrospinning to bioactive polymer nanofibers

    Czech Academy of Sciences Publication Activity Database

    Gentsch, R.; Pippig, F.; Schmidt, S.; Černoch, Peter; Polleux, J.; Börner, H. G.

    2011-01-01

    Roč. 44, č. 3 (2011), s. 453-461 ISSN 0024-9297 Institutional research plan: CEZ:AV0Z40500505 Keywords : electrospinning * polymer-peptide conjugate * block copolymer Subject RIV: CD - Macromolecular Chemistry Impact factor: 5.167, year: 2011

  18. One-pot synthesis of aryl sulfones from organometallic reagents and iodonium salts.

    Science.gov (United States)

    Margraf, Natalie; Manolikakes, Georg

    2015-03-06

    A transition-metal-free arylation of lithium, magnesium, and zinc sulfinates with diaryliodonium salts is described. The sulfinic acid salts were prepared from the reaction of the corresponding organometallic reagents and sulfur dioxide. Combination of the three single steps (preparation of the organometallic compound, sulfinate formation, and arylation) leads to a one-pot sequence for the synthesis of aryl sulfones from simple starting materials. The chemoselectivity of unsymmetrical diaryliodonium salts has been investigated. Potential and limitations of this method will be discussed.

  19. FORMATION MECHANISM OF NANOSIZED TIN OXIDE (SnO2 POWDER DURING HYDROTHERMAL SYNTHESIS

    Directory of Open Access Journals (Sweden)

    M. Ozan ÖZER

    2011-06-01

    Full Text Available Preparation of nanosized SnO₂ electroceramic powders via hydrothermal synthesis was investigated as a function of initial concentration and treatment time in order to understand the formation and growth mechanisms. SnO₂ powder was successfully synthesized from the hydrous tin oxide by hydro- thermal synthesis at 200°C. Crystalline SnO₂ particles with a specific surface area as high as 170 m₂/g were produced in a single step without requiring any calcination process. As initial concentration of metal cation increases from 0.0125 to 0.05 M, an Ostwald ripening type growth process was observed in the crystallite size from 3.1 to 4.6 nm. Evolution of tin oxide particles was also investigated by al- tering the treatment time from 1 to 24 h and a diffusion controlled growth behavior was observed as a function of synthesis time.

  20. Standardized chemical synthesis of Pseudomonas aeruginosa pyocyanin

    Directory of Open Access Journals (Sweden)

    Rajkumar Cheluvappa

    2014-01-01

    As we have extracted pyocyanin both from P. aeruginosa cultures, and via chemical synthesis; we know the procedural and product-quality differences. We endorse the relative ease, safety, and convenience of using the chemical synthesis described here. Crucially, our “naturally endotoxin-free” pyocyanin can be extracted easily without using infectious bacteria.

  1. Organic synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, S.E.

    1991-01-01

    This paper reports on reactions of organoboranes. Organoboron routes to unsaturated hydrocarbons. Boronic ester homologation. Properties of organosilicon compounds. Alkene synthesis (Peterson olefination). Allylsilanes and acylsilanes.

  2. Fire Synthesis

    Indian Academy of Sciences (India)

    1000ºC or special infrastructure which require careful maintenance. In such a situation fire synthesis is a simpler method that can be adopted for the bulk production of high purity alumina and related oxides. Fire Synthesis. Preparation of Alumina ...

  3. Plant mediated green synthesis: modified approaches

    Science.gov (United States)

    Das, Ratul Kumar; Brar, Satinder Kaur

    2013-10-01

    Plant mediated green synthesis of different metallic nanoparticles has emerged as one of the options for implementation of green chemistry principles, and successfully made an important contribution towards green nanotechnology. However, beyond the synthesis and application aspects, the science of green synthesis has carried some wrong perceptions in an unforeseen fashion. In this review, some of the key issues related to the green synthesis of metallic nanoparticles employing plants as reducing/capping agents have been addressed. Random selection of plants and its overall impact on the different aspects of green synthesis have been discussed. Emphasis is given to the setting of some standard selection criteria to be adopted for selecting a plant for use in green synthesis. How selection of a plant can positively or negatively influence both procedure and products of a green synthesis process is the prime concern of this article. In addition to selection, the key issue of biocompatibility associated with green synthesized metallic nanoparticles has been considered. Both selection of plant and biocompatibility were reconsidered for their minute details in terms of synthesis, analysis and data interpretation in the green synthesis approach. The key factors capable of fine tuning the core meaning of ``green'' in the synthesis of any metallic nanoparticles were taken into consideration. This article is an effort towards keeping the core meaning of green synthesis.

  4. Plant mediated green synthesis: modified approaches.

    Science.gov (United States)

    Das, Ratul Kumar; Brar, Satinder Kaur

    2013-11-07

    Plant mediated green synthesis of different metallic nanoparticles has emerged as one of the options for implementation of green chemistry principles, and successfully made an important contribution towards green nanotechnology. However, beyond the synthesis and application aspects, the science of green synthesis has carried some wrong perceptions in an unforeseen fashion. In this review, some of the key issues related to the green synthesis of metallic nanoparticles employing plants as reducing/capping agents have been addressed. Random selection of plants and its overall impact on the different aspects of green synthesis have been discussed. Emphasis is given to the setting of some standard selection criteria to be adopted for selecting a plant for use in green synthesis. How selection of a plant can positively or negatively influence both procedure and products of a green synthesis process is the prime concern of this article. In addition to selection, the key issue of biocompatibility associated with green synthesized metallic nanoparticles has been considered. Both selection of plant and biocompatibility were reconsidered for their minute details in terms of synthesis, analysis and data interpretation in the green synthesis approach. The key factors capable of fine tuning the core meaning of "green" in the synthesis of any metallic nanoparticles were taken into consideration. This article is an effort towards keeping the core meaning of green synthesis.

  5. Photochemical Approaches to Complex Chemotypes: Applications in Natural Product Synthesis

    Science.gov (United States)

    2016-01-01

    The use of photochemical transformations is a powerful strategy that allows for the formation of a high degree of molecular complexity from relatively simple building blocks in a single step. A central feature of all light-promoted transformations is the involvement of electronically excited states, generated upon absorption of photons. This produces transient reactive intermediates and significantly alters the reactivity of a chemical compound. The input of energy provided by light thus offers a means to produce strained and unique target compounds that cannot be assembled using thermal protocols. This review aims at highlighting photochemical transformations as a tool for rapidly accessing structurally and stereochemically diverse scaffolds. Synthetic designs based on photochemical transformations have the potential to afford complex polycyclic carbon skeletons with impressive efficiency, which are of high value in total synthesis. PMID:27120289

  6. In vivo synthesis and processing of cereal lectins.

    Science.gov (United States)

    Stinissen, H M; Peumans, W J; Carlier, A R

    1982-12-01

    The synthesis and processing of cereal lectins was followed in vivo. The initial translation products of lectin genes are higher molecular weight (28 K) precursors, which are post-translationally processed in a single step into authentic lectin polypeptides (23 K). The conversion of precursor into mature product is a rather slow process (the precursor has a half life of 36 min) and is apparently not a prerequisite for biological activity since the precursor exhibits sugar binding activity. Because of the striking resemblances between the processing of cereal lectins and vectorial processing of cytoplasmatically made chloroplast, mitochondrial and glyoxysomal proteins, vectorial processing of cereal lectins might be a means of transporting these proteins through a membrane into an extra-cytoplasmic compartment.

  7. TEM and EELS studies of microwave-irradiation synthesis of bimetallic platinum nanocatalysts

    CSIR Research Space (South Africa)

    Mathe, NR

    2014-01-01

    Full Text Available Microwave-irradiation (MW) synthesis of nanostructured materials provides for the synthesis of metal nanoparticles, using fast and uniform heating rates. This procedure affords better control of the shape and size of the nanoparticles when compared...

  8. Organolithium and organomagnesium compounds of the naphthalene series in organic synthesis

    International Nuclear Information System (INIS)

    Pozharskii, Alexander F; Ryabtsova, Oksana V

    2006-01-01

    The review summarises procedures for the synthesis of organolithium and organomagnesium compounds of the naphthalene series, including binaphthyls, the properties of these compounds and their use in organic synthesis.

  9. Single-step synthesis of a new series of meso di-Mannich bases from the cyclic aminal (2S,7R,11S,16R)-1,8,10,17-tetraazapentacyclo[8.8.1.1.8,170.2,7011,16]icosane and p-substituted phenols

    Science.gov (United States)

    2013-01-01

    Background The results presented herein show that the cyclic aminal (2S,7R,11S,16R)-1,8,10,17-tetraazapentacyclo[8.8.1.1.8,170.2,7011,16]icosane (6), derived from cis-(meso)-1,2-diaminocyclohexane and formaldehyde, is a suitable substrate for the preption of a series of cis-meso Mannich bases such as 8a-l by reaction with p-substituted phenols 7a-l in basic media. These compounds are valuable synthetic products and may find application in asymmetric catalysis. Results The products were characterized principally by NMR and IR spectroscopy. Both the benzylic and aminalic protons of the perhydrobenzimidazolidine moiety were diastereotopic due to the presence of stereogenic nitrogen centers. The occurrence of intramolecular hydrogen bonding interactions was confirmed by the broad OH stretching vibration band in the IR spectra. Vibrational spectra were calculated using B3LYP at 6-31G(d,p) level, and the calculated frequencies for the νOH vibrations were compared to those of the experimental spectra. Hydrogen bonding interactions in the solid state were observed through the X-ray crystallography of 8j. Additionally, Mulliken charges and Fukui indices for 6 were calculated as theoretical descriptors of electrophilicity. Conclusion A new series of meso Mannich bases called 4,4′-disubstituted-2,2′-{[(3aR,7aS)-2,3,3a,4,5,6,7,7a-octahydro-1H-1,3-benzimidazole-1,3-diyl]bis(methylene)} diphenols (8a-l) which are derived from cis-(meso)-1,2-diaminocyclohexane, were obtained from cyclic aminal 6. These results confirmed the behavior of 6 as an electrophilic preformed reagent in Mannich reactions in basic media. PMID:23758899

  10. Organic synthesis

    International Nuclear Information System (INIS)

    Lallemand, J.Y.; Fetizon, M.

    1988-01-01

    The 1988 progress report of the Organic Synthesis Chemistry laboratory (Polytechnic School, France), is presented. The laboratory activities are centered on the chemistry of natural products, which have a biological activity and on the development of new reactions, useful in the organic synthesis. The research works involve the following domains: the natural products chemistry which are applied in pharmacology, the plants and insects chemistry, the organic synthesis, the radical chemistry new reactions and the bio-organic physicochemistry. The published papers, the congress communications and the thesis are listed [fr

  11. An efficient method-of-lines simulation procedure for organic semiconductor devices.

    Science.gov (United States)

    Rogel-Salazar, J; Bradley, D D C; Cash, J R; Demello, J C

    2009-03-14

    We describe an adaptive grid method-of-lines (MOL) solution procedure for modelling charge transport and recombination in organic semiconductor devices. The procedure we describe offers an efficient, robust and versatile means of simulating semiconductor devices that allows for much simpler coding of the underlying equations than alternative simulation procedures. The MOL technique is especially well-suited to modelling the extremely stiff (and hence difficult to solve) equations that arise during the simulation of organic-and some inorganic-semiconductor devices. It also has wider applications in other areas, including reaction kinetics, combustion and aero- and fluid dynamics, where its ease of implementation also makes it an attractive choice. The MOL procedure we use converts the underlying semiconductor equations into a series of coupled ordinary differential equations (ODEs) that can be integrated forward in time using an appropriate ODE solver. The time integration is periodically interrupted, the numerical solution is interpolated onto a new grid that is better matched to the solution profile, and the time integration is then resumed on the new grid. The efficacy of the simulation procedure is assessed by considering a single layer device structure, for which exact analytical solutions are available for the electric potential, the charge distributions and the current-voltage characteristics. Two separate state-of-the-art ODE solvers are tested: the single-step Runge-Kutta solver Radau5 and the multi-step solver ODE15s, which is included as part of the Matlab ODE suite. In both cases, the numerical solutions show excellent agreement with the exact analytical solutions, yielding results that are accurate to one part in 1 x 10(4). The single-step Radau5 solver, however, is found to provide faster convergence since its efficiency is not compromised by the periodic interruption of the time integration when the grid is updated.

  12. Nanocrystalline functional materials and nanocomposites synthesis through aerosol routes

    Directory of Open Access Journals (Sweden)

    Milošević Olivera B.

    2003-01-01

    Full Text Available This paper represents the results of the design of functional nanocrystalline powders and nanocomposites using chemical reactions in aerosols. The process involves ultrasonic aerosol formation (mist generators with the resonant frequencies of 800 kHz, 1.7 and 2.5 MHz from precursor salt solutions and control over the aerosol decomposition in a high-temperature tubular flow reactor. During decomposition, the aerosol droplets undergo evaporation/drying, precipitation and thermolysis in a single-step process. Consequently, spherical, solid, agglomerate-free submicronic particles are obtained. The particle morphology, revealed as a composite structure consisting of primary crystallites smaller than 20 nm was analysed by several methods (XRD, DSC/DTA, SEM, TEM and discussed in terms of precursor chemistry and process parameters. Following the initial attempts, a more detailed aspect of nanocrystalline particle synthesis was demonstrated for the case of nanocomposites based on ZnO-MeO (MeO=Bi Cr+, suitable for electronic applications, as well as an yttrium-aluminum base complex system, suitable for phosphorus applications. The results imply that parts of the material structure responsible for different functional behaviour appear through in situ aerosol synthesis by processes of intraparticle agglomeration, reaction and sintering in the last synthesis stage.

  13. Substrate independent approach for synthesis of graphene platelet networks

    Science.gov (United States)

    Shashurin, A.; Fang, X.; Zemlyanov, D.; Keidar, M.

    2017-06-01

    Graphene platelet networks (GPNs) comprised of randomly oriented graphene flakes two to three atomic layers thick are synthesized using a novel plasma-based approach. The approach uses a substrate capable of withstanding synthesis temperatures around 800 °C, but is fully independent of the substrate material. The synthesis occurs directly on the substrate surface without the necessity of any additional steps. GPNs were synthesized on various substrate materials including silicon (Si), thermally oxidized Si (SiO2), molybdenum (Mo), nickel (Ni) and copper (Cu), nickel-chromium (NiCr) alloy and alumina ceramics (Al2O3). The mismatch between the atomic structures of sp2 honeycomb carbon networks and the substrate material is fully eliminated shortly after the synthesis initiation, namely when about 100 nm thick deposits are formed on the substrate. GPN structures synthesized on a substrate at a temperature of about 800 °C are significantly more porous in comparison to the much denser packed amorphous carbon deposits synthesized at lower temperatures. The method proposed here can potentially revolutionize the area of electrochemical energy storage by offering a single-step direct approach for the manufacture of graphene-based electrodes for non-Faradaic supercapacitors. Mass production can be achieved using this method if a roll-to-roll system is utilized.

  14. Solving fault diagnosis problems linear synthesis techniques

    CERN Document Server

    Varga, Andreas

    2017-01-01

    This book addresses fault detection and isolation topics from a computational perspective. Unlike most existing literature, it bridges the gap between the existing well-developed theoretical results and the realm of reliable computational synthesis procedures. The model-based approach to fault detection and diagnosis has been the subject of ongoing research for the past few decades. While the theoretical aspects of fault diagnosis on the basis of linear models are well understood, most of the computational methods proposed for the synthesis of fault detection and isolation filters are not satisfactory from a numerical standpoint. Several features make this book unique in the fault detection literature: Solution of standard synthesis problems in the most general setting, for both continuous- and discrete-time systems, regardless of whether they are proper or not; consequently, the proposed synthesis procedures can solve a specific problem whenever a solution exists Emphasis on the best numerical algorithms to ...

  15. Synthesis of Polyfunctionalized 4H-Pyrans

    Directory of Open Access Journals (Sweden)

    Manisha Bihani

    2013-01-01

    Full Text Available Amberlyst A21 catalyzed one-pot three-component coupling of aldehyde and malononitrile with active methylene compounds such as acetylacetone and ethyl acetoacetate for the synthesis of pharmaceutically important polyfunctionalized 4H-pyrans has been reported. Simple experimental procedure, no chromatographic purification, no hazardous organic solvents, easy recovery and reusability of the catalyst, and room temperature reaction conditions are some of the highlights of this protocol for the synthesis of pharmaceutically relevant focused libraries.

  16. Convenient synthesis of deuterated aluminium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Pawelke, Roland H.; Felderhoff, Michael; Weidenthaler, Claudia [Max-Planck-Institut fuer Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Muelheim an der Ruhr (Germany); Schueth, Ferdi [Max-Planck-Institut fuer Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Muelheim an der Ruhr (Germany)], E-mail: schueth@mpi-muelheim.mpg.de

    2008-09-15

    We describe the ball-milling synthesis of alkali metal deuterides from commercial lithium aluminium deuteride. This reaction principle was exemplified by the mechanochemical synthesis of NaAlD{sub 4} and KAlD{sub 4}. NaAlD{sub 4} was prepared on the multi-gram scale by this procedure and purified by standard wet-chemical separation. Pure NaAlD{sub 4} was obtained and used for the synthesis of Ca(AlD{sub 4}){sub 2}. The formation of all products was verified by X-ray diffraction.

  17. Green chemistry oriented organic synthesis in water.

    Science.gov (United States)

    Simon, Marc-Olivier; Li, Chao-Jun

    2012-02-21

    The use of water as solvent features many benefits such as improving reactivities and selectivities, simplifying the workup procedures, enabling the recycling of the catalyst and allowing mild reaction conditions and protecting-group free synthesis in addition to being benign itself. In addition, exploring organic chemistry in water can lead to uncommon reactivities and selectivities complementing the organic chemists' synthetic toolbox in organic solvents. Studying chemistry in water also allows insight to be gained into Nature's way of chemical synthesis. However, using water as solvent is not always green. This tutorial review briefly discusses organic synthesis in water with a Green Chemistry perspective.

  18. Fire Synthesis

    Indian Academy of Sciences (India)

    her PhD degree from. Bangalore University. She is currently working as a Research Associate at the Department of. Inorganic and Physical. Chemistry, Indian. Institute of Science,. Bangalore, on the synthesis of .... This method uses the experiences of propellant chemistry in making the redox mixture. The . stoichiometry or ...

  19. Fire Synthesis

    Indian Academy of Sciences (India)

    special infrastructure which require careful maintenance. In such situation fire synthesis is a simpler method that can be adopted for the bulk production of high purity .... reaction between Ti and B to form titanium boride. The reaction between titanium (fuel- electron donor) and boron (oxidiser-electron acceptor) once initiated ...

  20. Fire Synthesis

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 16; Issue 12. Fire Synthesis - Preparation of Alumina Products. Tanu Mimani. Volume 16 Issue 12 December 2011 pp 1324-1332. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/016/12/1324-1332 ...

  1. Fire Synthesis

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 2. Fire Synthesis - Preparation of Alumina Products. Tanu Mimani. General Article Volume 5 Issue 2 February 2000 pp 50-57. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/005/02/0050-0057 ...

  2. From high symmetry to high resolution in biological electron microscopy: a commentary on Crowther (1971) 'Procedures for three-dimensional reconstruction of spherical viruses by Fourier synthesis from electron micrographs'.

    Science.gov (United States)

    Rosenthal, Peter B

    2015-04-19

    Elucidation of the structure of biological macromolecules and larger assemblies has been essential to understanding the roles they play in living processes. Methods for three-dimensional structure determination of biological assemblies from images recorded in the electron microscope were therefore a key development. In his paper published in Philosophical Transactions B in 1971, Crowther described new computational procedures applied to the first three-dimensional reconstruction of an icosahedral virus from images of virus particles preserved in negative stain. The method for determining the relative orientation of randomly oriented particles and combining their images for reconstruction exploited the high symmetry of the virus particle. Computational methods for image analysis have since been extended to include biological assemblies without symmetry. Further experimental advances, combined with image analysis, have led to the method of cryomicroscopy, which is now used by structural biologists to study the structure and dynamics of biological machines and assemblies in atomic detail. This commentary was written to celebrate the 350th anniversary of the journal Philosophical Transactions of the Royal Society.

  3. Comparison of simple extraction procedures in liquid chromatography-mass spectrometry based determination of serum 7α-hydroxy-4-cholesten-3-one, a surrogate marker of bile acid synthesis.

    Science.gov (United States)

    LeníĿek, Martin; Vecka, Marek; Žížalová, Kateſina; Vítek, Libor

    2016-10-15

    The serum concentration of 7α-hydroxy-4-cholesten-3-one (C4), a marker of cholesterol 7α-hydroxylase activity, has recently become an attractive diagnostic tool for researchers interested in cholesterol and bile acid metabolism. The rapidly increasing demand of C4 measurement led to the development of various fast, mostly mass spectrometry-based analytical methods. Our aim was to compare four simple (i.e., not requiring solid phase extraction) extraction procedures (two "one-phase", and two "two-phase") in terms of basic analytical performance and their labouriousness. All methods exhibited comparable extraction recoveries (ranging from 88 to 97%) and intra-assay precision (variation coefficients below 10%), and failed in the removal of phospholipids. Although marked differences were observed in desalting and deproteination, all methods can be considered satisfactory. Simple acetonitrile precipitation can be recommended if a fast extraction and minimal hands-on time is preferred; while two-phase ammonium sulphate:acetonitrile extraction should be chosen when maximal deproteination is required. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Human factoring administrative procedures

    International Nuclear Information System (INIS)

    Grider, D.A.; Sturdivant, M.H.

    1991-01-01

    In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

  5. All-acrylic superelastomers: facile synthesis and exceptional mechanical behavior

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Wei; Goodwin, Andrew; Wang, Yangyang; Yin, Panchao; Wang, Weiyu; Zhu, Jiahua; Wu, Ting; Lu, Xinyi; Hu, Bin; Hong, Kunlun; Kang, Nam-Goo; Mays, Jimmy (Tennessee-K); (ORNL)

    2018-01-01

    All-acrylic multigraft copolymers made by a facile synthesis procedure exhibit elongation at break >1700% and strain recovery behavior far exceeding those of commercial acrylic and styrenic triblock copolymers.

  6. Copper catalyzed synthesis of quinolinopyrano [2, 3-] carbazole ...

    Indian Academy of Sciences (India)

    An efficient procedure for the synthesis of pyranocarbazole derivatives using copper catalysed Povarov reaction between aromatic amines and -propargyl carbazole carboxaldehyde has been developed. Ionic liquid is found to be a good solvent medium.

  7. Synthesis of fluorinated organic compounds using oxygen difluoride

    Science.gov (United States)

    Toy, M. S.

    1971-01-01

    Oxygen difluoride synthesis is a much simpler, higher-yield procedure than reactions originally followed to synthesize various fluorinated organic compounds. Extreme care is taken in working with oxygen difluoride as its reactions present severe explosion hazard.

  8. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 7; Issue 11. Organic Synthesis under Solvent-free Condition: An Environmentally Benign Procedure – II. Gopalpur Nagendrappa. General Article Volume 7 Issue 11 November 2002 pp 64-69 ...

  9. Synthesis of some new derivatives of thiazolopyrimidines and ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 3. Synthesis of some new derivatives of thiazolopyrimidines and hydrolysis of its arylidene derivative ... A new ammonium acetate-assisted, convenient and efficient procedure for the synthesis of arylidene derivatives of thiazolopyrimidine is described.

  10. Synthesis and Characterization of Silver Nanoparticles for an Undergraduate Laboratory

    Science.gov (United States)

    Orbaek, Alvin W.; McHale, Mary M.; Barron, Andrew R.

    2015-01-01

    The aim of this simple, quick, and safe laboratory exercise is to provide undergraduate students an introduction to nanotechnology using nanoparticle (NP) synthesis. Students are provided two procedures that allow for the synthesis of different yet controlled sizes of silver NPs. After preparing the NPs, the students perform UV-visible…

  11. The procedural egalitarian solution

    NARCIS (Netherlands)

    Dietzenbacher, Bas; Borm, Peter; Hendrickx, Ruud

    2017-01-01

    In this paper we introduce and analyze the procedural egalitarian solution for transferable utility games. This new concept is based on the result of a coalitional bargaining procedure in which egalitarian considerations play a central role. The procedural egalitarian solution is the first

  12. The Procedural Egalitarian Solution

    NARCIS (Netherlands)

    Dietzenbacher, Bas; Borm, Peter; Hendrickx, Ruud

    2016-01-01

    In this paper we introduce and analyze the procedural egalitarian solution for transferable utility games. This new concept is based on the result of a coalitional bargaining procedure in which egalitarian considerations play a central role. The procedural egalitarian solution is the first

  13. Developing policies and procedures.

    Science.gov (United States)

    Randolph, Susan A

    2006-11-01

    The development of policies and procedures is an integral part of the occupational health nurse's role. Policies and procedures serve as the foundation for the occupational health service and are based on its vision, mission, culture, and values. The design and layout selected for the policies and procedures should be simple, consistent, and easy to use. The same format should be used for all existing and new policies and procedures. Policies and procedures should be reviewed periodically based on a specified time frame (i.e., annually). However, some policies may require a more frequent review if they involve rapidly changing external standards, ethical issues, or emerging exposures.

  14. Incorporation of the zosteric sodium salt in silica nanocapsules: synthesis and characterization of new fillers for antifouling coatings

    Science.gov (United States)

    Ruggiero, Ludovica; Crociani, Laura; Zendri, Elisabetta; El Habra, Naida; Guerriero, Paolo

    2018-05-01

    In the last decade many commercial biocides were gradually banned for toxicity. This work reports, for the first time, the synthesis and characterization of silica nanocontainers loaded with a natural product antifoulant (NPA), the zosteric sodium salt which is a non-commercial and environmentally friendly product with natural origin. The synthesis approach is a single step dynamic self-assembly with tetraethoxysilane (TEOS) as silica precursor. Unlike conventional mesoporous silica nanoparticles, the structure of these silica nanocontainers provides loading capacity and allows prolonged release of biocide species. The obtained nanocapsules have been characterized morphologically by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The encapsulation was checked by FTIR ATR spectroscopy and thermogravimetric analyses. The results of the release studies show the great potential of the here presented newly developed nanofillers in all applications where a controlled release of non-toxic and environmentally friendly biocides is required.

  15. Synthesis, structural and magnetic characterization of soft magnetic nanocrystalline ternary FeNiCo particles

    Energy Technology Data Exchange (ETDEWEB)

    Toparli, Cigdem [Department of Metallurgical & Materials Eng., Istanbul Technical University, 34469 Istanbul (Turkey); Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf (Germany); Ebin, Burçak [Department of Metallurgical & Materials Eng., Istanbul Technical University, 34469 Istanbul (Turkey); Nuclear Chemistry and Industrial Material Recycling, Department of Chemistry and Chemical Engineering, Chalmers University of Technology, S-412 96 Gothenburg (Sweden); Gürmen, Sebahattin, E-mail: gurmen@itu.edu.tr [Department of Metallurgical & Materials Eng., Istanbul Technical University, 34469 Istanbul (Turkey)

    2017-02-01

    The present study focuses on the synthesis, microstructural and magnetic properties of ternary FeNiCo nanoparticles. Nanocrystalline ternary FeNiCo particles were synthesized via hydrogen reduction assisted ultrasonic spray pyrolysis method in single step. The effect of precursor concentration on the morphology and the size of particles was investigated. The syntheses were performed at 800 °C. Structure, morphology and magnetic properties of the as-prepared products were characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) studies. Scherer calculation revealed that crystallite size of the ternary particles ranged between 36 and 60 nm. SEM and TEM investigations showed that the particle size was strongly influenced by the precursor concentration and Fe, Ni, Co elemental composition of individual particles was homogeneous. Finally, the soft magnetic properties of the particles were observed to be a function of their size. - Highlights: • Ternary FeNiCo alloy nanocrystalline particles were synthesized in a single step. • Cubic crystalline structure and spherical morphology was observed by XRD, SEM and TEM investigations. • The analysis of magnetic properties indicates the soft magnetic features of particles.

  16. Procedure generation and verification

    International Nuclear Information System (INIS)

    Sheely, W.F.

    1986-01-01

    The Department of Energy has used Artificial Intelligence of ''AI'' concepts to develop two powerful new computer-based techniques to enhance safety in nuclear applications. The Procedure Generation System, and the Procedure Verification System, can be adapted to other commercial applications, such as a manufacturing plant. The Procedure Generation System can create a procedure to deal with the off-normal condition. The operator can then take correct actions on the system in minimal time. The Verification System evaluates the logic of the Procedure Generator's conclusions. This evaluation uses logic techniques totally independent of the Procedure Generator. The rapid, accurate generation and verification of corrective procedures can greatly reduce the human error, possible in a complex (stressful/high stress) situation

  17. A Safer and Convenient Synthesis of Sulfathiazole for Undergraduate Organic and Medicinal Chemistry Classes

    Science.gov (United States)

    Boyle, Jeff; Otty, Sandra; Sarojini, Vijayalekshmi

    2012-01-01

    A safer method for the synthesis of the sulfonamide drug sulfathiazole, for undergraduate classes, is described. This method improves upon procedures currently followed in several undergraduate teaching laboratories for the synthesis of sulfathiazole. Key features of this procedure include the total exclusion of pyridine, which has potential…

  18. A sequential high-yielding large-scale solution-method for synthesis of philanthotoxin analogues

    DEFF Research Database (Denmark)

    Wellendorph, Petrine; Jaroszewski, Jerzy W; Hansen, Steen Honoré

    2003-01-01

    A general, improved procedure for rapid synthesis of philanthotoxin analogues, a pharmacologically important class of polyamine conjugates, is described. The solution-phase procedure is illustrated by gram-scale synthesis of philanthotoxins PhTX-343 and PhTX-12. Selectively protected polyamines...

  19. The synthesis of clopidogrel

    Science.gov (United States)

    Huang, Yuanjun; Zhu, Qingxin

    2017-12-01

    Cardiac and cerebrovascular disease is a common disease. It is well recognized that antiplatelet agent is effective in the prevention and treatment of thrombosis. Clopidogrel is one of thieno pyridine derivatives, which can inhibit ADP-induced platelet aggregation. The preparation methods of Clopidogrel were reviewed and Clopidogrel was finally synthesized from 2-chlorobenzyl cyanide via bromination, condensation, hydrolyze, esterification, resolution, Finally with the sulfate, re-crystallization product of the target compound clopidogrel. The overall yield is 16%. Synthesis of the intermediate product and finally the structure of the product through ESI and 1H-NMR corroboration. The improved synthetic procedure has the advantage of low cost and is suitable for industrial production.

  20. Synthesis of Lysophospholipids

    Directory of Open Access Journals (Sweden)

    Paola D’Arrigo

    2010-03-01

    Full Text Available New synthetic methods for the preparation of biologically active phospholipids and lysophospholipids (LPLs are very important in solving problems of membrane–chemistry and biochemistry. Traditionally considered just as second-messenger molecules regulating intracellular signalling pathways, LPLs have recently shown to be involved in many physiological and pathological processes such as inflammation, reproduction, angiogenesis, tumorogenesis, atherosclerosis and nervous system regulation. Elucidation of the mechanistic details involved in the enzymological, cell-biological and membrane-biophysical roles of LPLs relies obviously on the availability of structurally diverse compounds. A variety of chemical and enzymatic routes have been reported in the literature for the synthesis of LPLs: the enzymatic transformation of natural glycerophospholipids (GPLs using regiospecific enzymes such as phospholipases A1 (PLA1, A2 (PLA2 phospholipase D (PLD and different lipases, the coupling of enzymatic processes with chemical transformations, the complete chemical synthesis of LPLs starting from glycerol or derivatives. In this review, chemo-enzymatic procedures leading to 1- and 2-LPLs will be described.

  1. Civil Procedure In Denmark

    DEFF Research Database (Denmark)

    Werlauff, Erik

    The book contains an up-to-date survey of Danish civil procedure after the profound Danish procedural reforms in 2007. It deals with questions concerning competence and function of Danish courts, commencement and preparation of civil cases, questions of evidence and burden of proof, international...... procedural questions, including relations to the Brussels I Regulation and Denmark's participation in this Regulation via a parallel convention with the EU countries, impact on Danish civil procedure of the convention on human rights, preparation and pronouncement of judgment and verdict, questions of appeal...... scientific activities conducted by the author, partly based on the author's experience as a member, through a number of years, of the Danish Standing Committee on Procedural Law (Retsplejeraadet), which on a continuous basis evaluates the need for civil procedural reforms in Denmark, and finally also based...

  2. Synthesis of several new carbapenem antibiotics.

    Science.gov (United States)

    Ohtani, M; Watanabe, F; Narisada, M

    1985-05-01

    A synthesis of several carbapenem antibiotics including 9-methoxythienamycin is described. The final deprotection of C-3 esters was accomplished by a novel procedure using aluminum trichloride under a very mild condition. The antibacterial activity against Gram-positive and Gram-negative bacteria is shown.

  3. Sulfamides in the synthesis of heterocyclic compounds

    International Nuclear Information System (INIS)

    Gazieva, Galina A; Kravchenko, Angelina N; Lebedev, Oleg V

    2000-01-01

    A comparative analysis of the structures and physicochemical properties of sulfamides and ureas has been performed. New procedures for the synthesis of heterocyclic compounds containing the sulfamide fragment are surveyed and the properties of the resulting compounds are described. The bibliography includes 112 references.

  4. Efficient and convenient synthesis of symmetrical carboxylic ...

    African Journals Online (AJOL)

    An efficient and convenient procedure for the synthesis of symmetrical carboxylic anhydrides from carboxylic acids with sulfated zirconia by PEG-1000 phase transfer catalysis has been developed. The reactions proceeded under mild and solvent-free conditions to provide the carboxylic anhydrides in good to excellent ...

  5. SYNTHESIS AND ANTIBACTERIAL EVALUATION OF SOME ...

    African Journals Online (AJOL)

    General procedure for the synthesis of Mannich Bases (III-V). Benzimidazolylthioacetic acid. (II) (0.002 mol) dissolved in ethanol and 3-4 drops of conc. HCl was added and reaction mixture was kept for stirring. To the stirring reaction mixture, formaldehyde (0.002 mol) was added drop wise and stirring was continued for 10 ...

  6. Decision-making Procedures

    DEFF Research Database (Denmark)

    Aldashev, Gani; Kirchsteiger, Georg; Sebald, Alexander Christopher

    2009-01-01

    It is a persistent finding in psychology and experimental economics that people's behavior is not only shaped by outcomes but also by decision-making procedures. In this paper we develop a general framework capable of modelling these procedural concerns. Within the context of psychological games we...... define procedures as mechanisms that influence the probabilities of reaching different endnodes. We show that for such procedural games a sequential psychological equilibrium always exists. Applying this approach within a principal-agent context we show that the way less attractive jobs are allocated...

  7. Bariatric Surgery Procedures

    Science.gov (United States)

    ... Procedures Who is a Candidate for Bariatric Surgery? Childhood and Adolescent Obesity Find a Provider Benefits of Bariatric Surgery Life ... Bariatric Surgery FAQs Bariatric Surgery Procedures BMI Calculator Childhood and Adolescent Obesity 100 SW 75th Street, Suite 201, Gainesville, FL, ...

  8. Guidelines for procedural pain in the newborn

    Science.gov (United States)

    Lago, Paola; Garetti, Elisabetta; Merazzi, Daniele; Pieragostini, Luisa; Ancora, Gina; Pirelli, Anna; Bellieni, Carlo Valerio

    2009-01-01

    Despite accumulating evidence that procedural pain experienced by newborn infants may have acute and even long-term detrimental effects on their subsequent behaviour and neurological outcome, pain control and prevention remain controversial issues. Our aim was to develop guidelines based on evidence and clinical practice for preventing and controlling neonatal procedural pain in the light of the evidence-based recommendations contained in the SIGN classification. A panel of expert neonatologists used systematic review, data synthesis and open discussion to reach a consensus on the level of evidence supported by the literature or customs in clinical practice and to describe a global analgesic management, considering pharmacological, non-pharmacological, behavioural and environmental measures for each invasive procedure. There is strong evidence to support some analgesic measures, e.g. sucrose or breast milk for minor invasive procedures, and combinations of drugs for tracheal intubation. Many other pain control measures used during chest tube placement and removal, screening and treatment for ROP, or for postoperative pain, are still based not on evidence, but on good practice or expert opinions. Conclusion: These guidelines should help improving the health care professional's awareness of the need to adequately manage procedural pain in neonates, based on the strongest evidence currently available. PMID:19484828

  9. Reforming Russian Civil Procedur

    Directory of Open Access Journals (Sweden)

    Dmitry Maleshin

    2016-01-01

    Full Text Available The II Annual Symposium of the journal Herald of Civil Procedure ‘2015: The Civil Procedure 2.0: Reform and Current State’ took place on October 9, 2015, at the Faculty of Law of Kazan (Volga region Federal University.The Symposium is now an established tradition for the University. In 2015 it brought together in Kazan eminent scholars of civil procedure from cities across the whole of Russia: Moscow, St. Petersburg, Saratov, Ekaterinburg, Omsk, Samara, Nizhnekamsk and others. This large-scale event attracted the attention not only of Russian scholars, but also of legal scholars from abroad: Elisabetta Silvestri (Professor, University of Pavia, Italy, William B. Simons (Professor, University of Tartu, Estonia, Jaroslav Turlukovsky (Professor, Warsaw University, Poland, Stuart H. Schultz (Practising Attorney, USA, Irina Izarova (Associate Professor, Taras Shevchenko National University of Kyiv, Ukraine.The opening ceremony of the Symposium began with greetings to all participants and best wishes for productive discussions. Participants were welcomed with remarks by Marat Khairullin, Deputy Chair of the Supreme Court of the Republic of Tatarstan, Radik Ilyasov, Head of the Federal Bailiff Service of the Republic of Tatarstan, and Ildar Tarkhanov, Academic Supervisor at the Faculty of Law. They expressed their appreciation for the great value of the journal Herald of Civil Procedure in the growth of the science of civil procedure and enforcement procedure, and for its contributions to the development of the judicial system of the Russian Federation.In addition to hearing prepared reports and discussing viewpoints on current issues of civil and arbitration procedure, participants attended presentations by representatives from procedural law periodicals in the frame of the Symposium. The Editor-in-Chief of Herald of Civil Procedure, Damir Valeev, and the Commercial Director of the Statut Publishing House (Moscow, Kirill Samoilov, presented new

  10. Play vs. Procedures

    DEFF Research Database (Denmark)

    Hammar, Emil

    Through the theories of play by Gadamer (2004) and Henricks (2006), I will show how the relationship between play and game can be understood as dialectic and disruptive, thus challenging understandings of how the procedures of games determine player activity and vice versa. As such, I posit some...... analytical consequences for understandings of digital games as procedurally fixed (Boghost, 2006; Flannagan, 2009; Bathwaite & Sharp, 2010). That is, if digital games are argued to be procedurally fixed and if play is an appropriative and dialectic activity, then it could be argued that the latter affects...... and alters the former, and vice versa. Consequently, if the appointed procedures of a game are no longer fixed and rigid in their conveyance of meaning, qua the appropriative and dissolving nature of play, then understandings of games as conveying a fixed meaning through their procedures are inadequate...

  11. Diffusion-controlled formation of Ti2O3 during spark-plasma synthesis.

    Science.gov (United States)

    Veremchuk, I; Antonyshyn, I; Candolfi, C; Feng, X; Burkhardt, U; Baitinger, M; Zhao, J-T; Grin, Yu

    2013-04-15

    The spark-plasma-sintering (SPS) technique has successfully been applied for the single-step direct synthesis of Ti2O3 from a mixture of powders of rutile/anatase with titanium. The components react by diffusion through the grain boundaries, forming several intermediate phases locally. A single-phase material of titanium(III) oxide is obtained in compact bulk form after 180 min of SPS treatment at 1473 K. The electrical and thermal transport properties of such a SPS-prepared material measured in the temperature range between 300 and 800 K reflect the known semiconductor-to-metal transition above 400 K. The observed metallic-like electrical and thermal conductivity above this temperature is in good agreement with previously reported results. A maximum of the thermoelectric figure-of-merit ZT = 0.04 is achieved at 350 K.

  12. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    GENERAL I ARTICLE. Organic Synthesis under Solvent-free Condition. An Environmentally Benign Procedure - II. The author is a Professor of Organic Chemistry at. Bangalore University,. Bangalore. His main area of research is organosilicon chemistry with particular attention to developing new synthetic procedures and.

  13. Green procedures for the chemoselective synthesis of acylals and ...

    Indian Academy of Sciences (India)

    From the green chemistry point of view, safety consid- erations and the simplicity of the process, ... carbonyl compounds because of their stability in neutral and basic conditions and ease of chemoselective prepa- ... hazardous organic solvents, harsh reaction conditions, low yields, tedious work-up and effluent pollution.

  14. Versatile three-component procedure for combinatorial synthesis of ...

    Indian Academy of Sciences (India)

    . (a) Jane J M, Hsiao Y and Armstrong J D 2006 J. Org. Chem. 71 390; (b) List B, Pojarliev P, Biller W T and. Martin H J 2002 J. Am. Chem. Soc. 124 827. 19. (a) Rasalkar M S, Potdar M K, Mohile S S and Salunkhe. M M 2005 J. Mol. Catal.

  15. Procedures for the synthesis of ethylenediamine bisborane and ammonia borane

    Science.gov (United States)

    Ramachandran, Padi Veeraraghavan; Gagare, Pravin D.; Mistry, Hitesh; Biswas, Bidyut

    2017-01-03

    A method for synthesizing ammonia borane includes (a) preparing a reaction mixture in one or more solvents, the reaction mixture containing sodium borohydride, at least one ammonium salt, and ammonia; and (b) incubating the reaction mixture at temperatures between about 0.degree. C. to about room temperature in an ambient air environment under conditions sufficient to form ammonia borane. Methods for synthesizing ethylenediamine bisborane, and methods for dehydrogenation of ethylenediamine bisborane are also described.

  16. Synthesis and optical properties of TiO{sub 2}-based magnetic nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Scarisoreanu, M.; Morjan, I. [National Institute for Lasers, Plasma and Radiation Physics (NILPRP), Atomistilor 409, PO Box MG-36, Magurele, Bucharest 077125 (Romania); Fleaca, C.-T., E-mail: claudiufleaca@yahoo.com [National Institute for Lasers, Plasma and Radiation Physics (NILPRP), Atomistilor 409, PO Box MG-36, Magurele, Bucharest 077125 (Romania); “Politehnica” University of Bucharest, Physics Department, Independentei 313, Bucharest (Romania); Morjan, I.P.; Niculescu, A.-M.; Dutu, E.; Badoi, A.; Birjega, R.; Luculescu, C. [National Institute for Lasers, Plasma and Radiation Physics (NILPRP), Atomistilor 409, PO Box MG-36, Magurele, Bucharest 077125 (Romania); Vasile, E. [“Politehnica” University of Bucharest, Faculty of Applied Chemistry and Materials Science, Department of Oxide Materials and Nanomaterials, Gh. Polizu 1-7, Bucharest (Romania); Danciu, V. [“Babes-Boyai” University, Faculty of Chemistry and Chemical Engineering, Electrochemical Research Laboratory, 11 Arany Janos Street, Cluj-Napoca 400028 (Romania); Filoti, G. [National Institute for Materials Physics (NIMP), Atomistilor 105bis, PO Box MG7, R-077125 Magurele, Bucharest (Romania)

    2015-05-01

    Highlights: • Magnetic titania@silica nanoparticles were synthesized by the single step laser pyrolysis. • Fe(CO){sub 5}, TiCl{sub 4}, HMDSO and O{sub 2} from air were the precursors and C{sub 2}H{sub 4} was the sensitizer. • Samples present a typical character of diluted magnetic oxide systems. • Samples have a lower bandgap energy (down to E{sub g} = 1.85 eV) than the P25 Degussa. - Abstract: Magnetic titania nanoparticles covered/embedded in SiO{sub 2} shell/matrix were simultaneously manufactured by the single-step laser pyrolysis. The present study is a continuation of our previous investigations on the TiO{sub 2}/Fe and TiO{sub 2}/HMDSO (hexamethyldisiloxane) derived-systems. The aim of this work is to study the synthesis by IR (Infrared) laser pyrolysis of magnetic TiO{sub 2} based nanocomposites which implies many concurrent processes induced in the gas phase by the laser radiation. The dependence between characteristic properties and the synthesis parameters was determined by many analytical and complementary methods: XRD (X-ray diffraction) structural analysis, UV–vis (ultraviolet–visible) and EDAX (energy-dispersive X-ray) spectroscopy, TEM and HRTEM (transmission electron microscopy at low and high resolution) analysis and magnetic measurements. The results of analysis indicate the presence of disordered silica, Fe, α-Fe{sub 2}O{sub 3} and mixtures of anatase and rutile phases with mean crystallite dimensions (in the 14–34 nm range) with typical character of diluted magnetic oxide systems and a lower bandgap energy (E{sub g} = 1.85 eV) as compared with TiO{sub 2} P25 Degussa sample.

  17. Reforming Russian civil Procedure

    OpenAIRE

    MALESHIN DMITRY; SILVESTRI ELISABETTA; SITDIKOV RUSLAN; VALEEV DAMIR

    2016-01-01

    The II Annual symposium of the journal Herald of Civil Procedure ‘2015: the Civil Procedure 2.0: reform and Current state’took place on october 9, 2015, at the Faculty of Law of kazan (Volga region) Federal university. the symposium is now an established tradition for the university. In 2015 it brought together in kazan eminent scholars of civil procedure from cities across the whole of russia: Moscow, st. Petersburg, saratov, Ekaterinburg, omsk, samara, Nizhnekamsk and others. this large-sca...

  18. Reforming Russian Civil Procedur

    OpenAIRE

    Dmitry Maleshin; Elisabetta Silvestri; Ruslan Sitgikov; Damir Valeev

    2016-01-01

    The II Annual Symposium of the journal Herald of Civil Procedure ‘2015: The Civil Procedure 2.0: Reform and Current State’ took place on October 9, 2015, at the Faculty of Law of Kazan (Volga region) Federal University.The Symposium is now an established tradition for the University. In 2015 it brought together in Kazan eminent scholars of civil procedure from cities across the whole of Russia: Moscow, St. Petersburg, Saratov, Ekaterinburg, Omsk, Samara, Nizhnekamsk and others. This large-sca...

  19. Law of procedure

    International Nuclear Information System (INIS)

    Witt, S. de.

    1984-01-01

    The real protection of fundamental rights of the population does not only depend on the substantive concretization in the atomic energy law but also on its procedural shaping. The more the citizens are burdened by governmental decisions the more decidedly it is requested not only by the principle of democracy, but also by the principle of law, that the parties concerned participate intensively in the procedure. In this second contribution De Witt describes the atomic energy licensing procedure and compares it with this claim. (orig./HSCH) [de

  20. Synthesis of the Commercial Fragrance Compound Ethyl 6-Acetoxyhexanoate: A Multistep Ester Experiment for the Second-Year Organic Laboratory

    Science.gov (United States)

    McCullagh, James V.; Hirakis, Sophia P.

    2017-01-01

    This synthesis of ethyl 6-acetoxyhexanoate (Berryflor) is designed as an experiment for use in a second-year organic chemistry course focusing on the synthesis and reaction of esters. The compound is described as having a raspberry-like odor with jasmine and anise aspects. A two-step procedure for its synthesis beginning with inexpensive…

  1. Soil Sampling Operating Procedure

    Science.gov (United States)

    EPA Region 4 Science and Ecosystem Support Division (SESD) document that describes general and specific procedures, methods, and considerations when collecting soil samples for field screening or laboratory analysis.

  2. Cardiac Procedures and Surgeries

    Science.gov (United States)

    ... the Procedure Does A stent is a wire mesh tube used to prop open an artery during ... a Heart Attack • Heart Attack Tools & Resources • Support Network Heart Attack Tools & Resources My Cardiac Coach What ...

  3. Cosmetic Procedure Questions

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Cosmetic Procedure Questions Want to look younger? Start ...

  4. Dynamic alarm response procedures

    International Nuclear Information System (INIS)

    Martin, J.; Gordon, P.; Fitch, K.

    2006-01-01

    The Dynamic Alarm Response Procedure (DARP) system provides a robust, Web-based alternative to existing hard-copy alarm response procedures. This paperless system improves performance by eliminating time wasted looking up paper procedures by number, looking up plant process values and equipment and component status at graphical display or panels, and maintenance of the procedures. Because it is a Web-based system, it is platform independent. DARP's can be served from any Web server that supports CGI scripting, such as Apache R , IIS R , TclHTTPD, and others. DARP pages can be viewed in any Web browser that supports Javascript and Scalable Vector Graphics (SVG), such as Netscape R , Microsoft Internet Explorer R , Mozilla Firefox R , Opera R , and others. (authors)

  5. Assisted Medical Procedures (AMP)

    Data.gov (United States)

    National Aeronautics and Space Administration — DOCUMENTATION, DEVELOPMENT, AND PROGRESS The AMP was initially being developed as part the Advanced Integrated Clinical System (AICS)-Guided Medical Procedure System...

  6. Alternative Refractive Surgery Procedures

    Science.gov (United States)

    ... the epithelial cells. Once the epithelial flap is created and moved aside, the procedure is the same ... Sites EyeWiki International Society of Refractive Surgery * Required * First Name: * Last Name: Member ID: * Phone Number: * Email: * ...

  7. EML procedures manual

    International Nuclear Information System (INIS)

    Volchok, H.L.; de Planque, G.

    1982-01-01

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

  8. Canalith Repositioning Procedure

    Science.gov (United States)

    ... Overview The canalith repositioning procedure can help relieve benign paroxysmal positional vertigo (BPPV), a condition in which you have brief, but ... the inner ear responsible for balance (vestibular labyrinth). BPPV occurs when tiny particles called otoconia in one ...

  9. Nuclear materials management procedures

    International Nuclear Information System (INIS)

    Veevers, K.; Silver, J.M.; Quealy, K.J.; Steege, E. van der.

    1987-10-01

    This manual describes the procedures for the management of nuclear materials and associated materials at the Lucas Heights Research Laboratories. The procedures are designed to comply with Australia's nuclear non-proliferation obligations to the International Atomic Energy Agency (IAEA), bilateral agreements with other countries and ANSTO's responsibilities under the Nuclear Non-Proliferation (Safeguards) Act, 1987. The manual replaces those issued by the Australian Atomic Energy Commission in 1959, 1960 and 1969

  10. Procedural semantic cities

    OpenAIRE

    Roglà Pujalt, Otger; Pelechano Gómez, Núria; Patow, Gustavo Ariel

    2017-01-01

    Procedural modeling of virtual cities has achieved high levels of realism with little effort from the user. One can rapidly obtain a large city using off-the-shelf software based on procedural techniques, such as the use of CGA. However in order to obtain realistic virtual cities it is necessary to include virtual humanoids that behave realistically adapting to such environment. The first step towards achieving this goal requires tagging the environment with semantics, which is a time consumi...

  11. Synthesis and Purification of a Hammerhead Ribozyme and a Fluorescein-Labeled RNA Substrate. A Biochemistry Laboratory: Part 1

    Science.gov (United States)

    Chow, Christine S.; Somne, Smita

    1999-05-01

    The applications of in vitro transcription and chemical synthesis of RNA are discussed. This laboratory describes the in vitro synthesis of a 38-nucleotide hammerhead ribozyme and the synthesis of a 17-nucleotide fluorescein-labeled RNA substrate by using standard phosphoramidite methodologies, two widely used methods in modern RNA research. The synthesis and purification procedures outlined allow students to develop an understanding of RNA handling procedures, synthesis of modified nucleic acids, gel electrophoresis, visualization of RNA by nonradioactive techniques, and quantitation of nucleic acids. The RNAs that are synthesized have applications in biotechnology and medicine; thus the students gain access to current problems in chemical and clinical research.

  12. The Interpretation of Cholesterol Balance Derived Synthesis Data and Surrogate Noncholesterol Plasma Markers for Cholesterol Synthesis under Lipid Lowering Therapies

    Directory of Open Access Journals (Sweden)

    Frans Stellaard

    2017-01-01

    Full Text Available The cholesterol balance procedure allows the calculation of cholesterol synthesis based on the assumption that loss of endogenous cholesterol via fecal excretion and bile acid synthesis is compensated by de novo synthesis. Under ezetimibe therapy hepatic cholesterol is diminished which can be compensated by hepatic de novo synthesis and hepatic extraction of plasma cholesterol. The plasma lathosterol concentration corrected for total cholesterol concentration (R_Lath as a marker of de novo cholesterol synthesis is increased during ezetimibe treatment but unchanged under treatment with ezetimibe and simvastatin. Cholesterol balance derived synthesis data increase during both therapies. We hypothesize the following. (1 The cholesterol balance data must be applied to the hepatobiliary cholesterol pool. (2 The calculated cholesterol synthesis value is the sum of hepatic de novo synthesis and the net plasma—liver cholesterol exchange rate. (3 The reduced rate of biliary cholesterol absorption is the major trigger for the regulation of hepatic cholesterol metabolism under ezetimibe treatment. Supportive experimental and literature data are presented that describe changes of cholesterol fluxes under ezetimibe, statin, and combined treatments in omnivores and vegans, link plasma R_Lath to liver function, and define hepatic de novo synthesis as target for regulation of synthesis. An ezetimibe dependent direct hepatic drug effect cannot be excluded.

  13. The assembly and use of continuous flow systems for chemical synthesis.

    Science.gov (United States)

    Britton, Joshua; Jamison, Timothy F

    2017-11-01

    The adoption of and opportunities in continuous flow synthesis ('flow chemistry') have increased significantly over the past several years. Continuous flow systems provide improved reaction safety and accelerated reaction kinetics, and have synthesised several active pharmaceutical ingredients in automated reconfigurable systems. Although continuous flow platforms are commercially available, systems constructed 'in-lab' provide researchers with a flexible, versatile, and cost-effective alternative. Herein, we describe the assembly and use of a modular continuous flow apparatus from readily available and affordable parts in as little as 30 min. Once assembled, the synthesis of a sulfonamide by reacting 4-chlorobenzenesulfonyl chloride with dibenzylamine in a single reactor coil with an in-line quench is presented. This example reaction offers the opportunity to learn several important skills including reactor construction, charging of a back-pressure regulator, assembly of stainless-steel syringes, assembly of a continuous flow system with multiple junctions, and yield determination. From our extensive experience of single-step and multistep continuous flow synthesis, we also describe solutions to commonly encountered technical problems such as precipitation of solids ('clogging') and reactor failure. Following this protocol, a nonspecialist can assemble a continuous flow system from reactor coils, syringes, pumps, in-line liquid-liquid separators, drying columns, back-pressure regulators, static mixers, and packed-bed reactors.

  14. A multifunction editor for programming control sequences for a robot based radiopharmaceutical synthesis system

    International Nuclear Information System (INIS)

    Appelquist, G.; Bohm, C.

    1990-01-01

    A Multifunction Editor is a development tool for building control sequences for a robotized production system for positron emitting radiopharmaceuticals. This system consists of SCARA robot and a PC-AT personal computer as a controller together with general and synthesis specific chemistry equipment. The general equipment, which is common for many synthesis, is fixed to the wall of the hotcell, while the specific equipment, dedicated to the given synthesis, is located on a removable tray. The program recognizes commands to move the robot, to control valves and to control the computer screen. From within the editor it is possible to run the control sequence forward or backward to test it and to use the single step feature to debug. The editor commands include insert, replace and delete of commands in the sequence. When programming or editing robot movements the robot may be controlled by the mouse, from the keyboard or from a remote control box. The robot control sequence consists of a succession of stored robot positions. The screen control is used to display dynamic flowchart diagrams. This is achieved by displaying a modified picture on the screen whenever the system state has been changed significantly

  15. Exploitation of de-oiled jatropha waste for gold nanoparticles synthesis: A green approach

    Directory of Open Access Journals (Sweden)

    Suvardhan Kanchi

    2018-02-01

    Full Text Available A novel single step green-synthesis route has been developed for the synthesis of gold nanoparticles using aqueous extract of de-oiled jatropha waste (DJW. DJW, a second stage waste, was adopted as a reducing agent to reduce HAuCl4. Different optimal parameters such as ratio of HAuCl4(aq/DJW(aq, reaction temperature and pH effects were also studied to fine-tune the shape of the gold nanoparticles (AuNPs. The resultant AuNPs were characterized by UV–visible spectrometry, Transmission electron microscopy, Selected area electron diffraction, Powder X-ray diffraction and Fourier transform infrared spectroscopy. Triangle, hexagonal and spherical shaped AuNPs were obtained with the average particle size of ∼14 nm. Furthermore, the AuNPs were capped and efficiently stabilized by protein molecules present in the DJW. In short, this novel synthesis route provides an environmental friendly and low cost option, as compared to currently available expensive chemical and/or physical methods.

  16. Fabrication of targets for transmutation of americium : synthesis of inertial matrix by sol-gel method. Procedure study on the infiltration of a radioactive solutions; Fabricacion de blancos para la transmutacion de americio: sintesis de matrices inertes por el metodo sol-gel. Estudio del procedimiento de infiltracion de disoluciones radiactivas

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Carretero, A. [Universidad Complutense de Madrid (Spain)

    2002-07-01

    Transmutation and incineration are innovative options in the management and disposal of fission products and actinides. nevertheless, the fabrication of targets for transmutation and incineration of actinides and fission products require a reconsideration of conventional processes (mechanical blending) and the development of new procedures compatible with the high activity of these materials. This work presents th R and D of a new fabrication method called INRAM (Infiltration of Radioactive Materials) based on the infiltration of an actinide solution in a porous non radiotoxic material in the form of a pellet (up to 12% An), or beads (up to 40% An) produced by sol-gel. The first method have been used for the fabrication of spinel (MgAl{sub 2}O{sub 4}) targets containing 11% Am, which have been irradiated in HFR-Petten (358.4 full power days). Post-test burn-up calculations showed that at the end of the irradiation the initial Am-241 concentration was reduced to 4%. The fraction of the initial americum atoms that have been fissioned is 28%. The main advantage of the INRAM method is that matrices with low or zero activity can be fabricated and formed into the required shape in an unshielded facility. This method offers other advantages over conventional ones, such as the active wastes are reduced, is easy to automate, adoptable to telemanipulation and dust free, which facilitate operator intervention and minimise radiation exposure to the personal. In addition, the infiltrant needs only be present in liquid form, i. e. it could be transferred directly from the reprocessing plant for fabrication into targets without conversion into-solid form. In order to optimise the infiltration process in depth investigations of all important process parameters, e. g. infiltration kinetics and metal (pu, Am) concentration in the feed solution, and also on extensive study or powder metallurgy parameters for the preparation of high quality fuel pellets with a high density, have been

  17. Anesthesia for radiologic procedures

    International Nuclear Information System (INIS)

    Forestner, J.E.

    1987-01-01

    Anesthetic techniques for neurodiagnostic studies and radiation therapy have been recently reviewed, but anesthetic involvement in thoracic and abdominal radiology has received little attention. Patient reactions to radiologic contrast media may be of concern to the anesthesiologist, who is often responsible for injecting these agents during diagnostic procedures, and thus is included in this discussion. Finally, the difficulties of administering anesthesia for magnetic resonance imaging (MRI) scans are outlined, in an effort to help anesthesiologist to anticipate problems with this new technologic development. Although there are very few indications for the use of general anesthesia for diagnostic radiologic studies in adults, most procedures performed with children, the mentally retarded, or the combative adult require either heavy sedation or general anesthesia. In selecting an anesthetic technique for a specific procedure, both the patient's disease process and the requirements of the radiologist must be carefully balanced

  18. Total synthesis of ciguatoxin.

    Science.gov (United States)

    Hamajima, Akinari; Isobe, Minoru

    2009-01-01

    Something fishy: Ciguatoxin (see structure) is one of the principal toxins involved in ciguatera poisoning and the target of a total synthesis involving the coupling of three segments. The key transformations in this synthesis feature acetylene-dicobalthexacarbonyl complexation.

  19. Factoring humans into procedures

    International Nuclear Information System (INIS)

    Luna, S.F.; Sturdivant, M.H.; McKay, R.C.

    1988-01-01

    INPO statistics on reported events in nuclear power plants rank deficient procedures as the largest single cause of human performance errors. Human factors principles used to improve the effectiveness of the control room operator can also improve the usability of written procedures. This human factors approach treats each page or complement of pages as a display. Four techniques for applying this approach are reviewed in this paper: (1) presenting information in small blocks (or fields), (2) presenting information consistently, (3) using the mental templates of the performer, and (4) matching the physical features of the plant. A final section offers examples in which combinations of these techniques are used

  20. Material control assessment procedure

    International Nuclear Information System (INIS)

    Adams, R.W.; Spogen, L.R.

    1977-06-01

    The material control system assessment procedure being developed by the Lawrence Livermore Laboratory for the U.S. Nuclear Regulatory Commission is reviewed. It consists of five major sections: Target Identification, Adversary Sequence and Simuli Generation, Material Control System Response Determination, Safeguard System Outcome Determination, and Safeguard System Utility Determination. When adopted, this procedure will reduce safeguards licensing problems by providing compatibility with future performance based regulations, explicit evaluation rules and requirements, well-defined trade-off structures, and user-oriented and systematic evaluation and design tools

  1. 76 FR 62092 - Filing Procedures

    Science.gov (United States)

    2011-10-06

    ... INTERNATIONAL TRADE COMMISSION Filing Procedures AGENCY: International Trade Commission. ACTION: Notice of issuance of Handbook on Filing Procedures. SUMMARY: The United States International Trade Commission (``Commission'') is issuing a Handbook on Filing Procedures to replace its Handbook on Electronic...

  2. Biomimetic and Bioinspired Synthesis of Nanomaterials/Nanostructures.

    Science.gov (United States)

    Zan, Guangtao; Wu, Qingsheng

    2016-03-16

    In recent years, due to its unparalleled advantages, the biomimetic and bioinspired synthesis of nanomaterials/nanostructures has drawn increasing interest and attention. Generally, biomimetic synthesis can be conducted either by mimicking the functions of natural materials/structures or by mimicking the biological processes that organisms employ to produce substances or materials. Biomimetic synthesis is therefore divided here into "functional biomimetic synthesis" and "process biomimetic synthesis". Process biomimetic synthesis is the focus of this review. First, the above two terms are defined and their relationship is discussed. Next different levels of biological processes that can be used for process biomimetic synthesis are compiled. Then the current progress of process biomimetic synthesis is systematically summarized and reviewed from the following five perspectives: i) elementary biomimetic system via biomass templates, ii) high-level biomimetic system via soft/hard-combined films, iii) intelligent biomimetic systems via liquid membranes, iv) living-organism biomimetic systems, and v) macromolecular bioinspired systems. Moreover, for these five biomimetic systems, the synthesis procedures, basic principles, and relationships are discussed, and the challenges that are encountered and directions for further development are considered. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. The TOMAX-procedure

    NARCIS (Netherlands)

    Overgoor, M.L.E.

    2015-01-01

    Most patients with a low spinal lesion (LSL) have intact erectile function but no penile sensation, which can lead to frustration. To tackle this problem, we designed TOMAX, TOMAXimize sensation, sexuality and quality of life, a surgical procedure in which a functional "groin” nerve is connected to

  4. OCRWM international procedures

    International Nuclear Information System (INIS)

    1986-03-01

    These international procedures provide guidance and assistance for the Office of Civilian Radioactive Waste Management (OCRWM) and for OCRWM Project Offices, contractors and subcontractors in conducting international activities. They supplement the relevant Department of Energy (DOE) orders (which are referenced), not supplant them

  5. 3. Procedures and Recursion

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 6. Algorithms Procedures and Recursion. R K Shyamasundar. Series Article Volume 1 ... Author Affiliations. R K Shyamasundar1. Computer Science Group, Tata Institute of Fundamental Research, Homi Bhabha Road Mumbai 400 005, India.

  6. Educational Accounting Procedures.

    Science.gov (United States)

    Tidwell, Sam B.

    This chapter of "Principles of School Business Management" reviews the functions, procedures, and reports with which school business officials must be familiar in order to interpret and make decisions regarding the school district's financial position. Among the accounting functions discussed are financial management, internal auditing,…

  7. IXM gas sampling procedure

    International Nuclear Information System (INIS)

    Pingel, L.A.

    1995-01-01

    Ion Exchange Modules (IXMs) are used at the 105-KE and -KW Fuel Storage Basins to control radionuclide concentrations in the water. A potential safety concern relates to production of hydrogen gas by radiolysis of the water trapped in the ion exchange media of spent IXMs. This document provides a procedure for sampling the gases in the head space of the IXM

  8. Formalizing physical security procedures

    NARCIS (Netherlands)

    Meadows, C.; Pavlovic, Dusko

    Although the problems of physical security emerged more than 10,000 years before the problems of computer security, no formal methods have been developed for them, and the solutions have been evolving slowly, mostly through social procedures. But as the traffic on physical and social networks is now

  9. Juveniles in criminal procedure

    Directory of Open Access Journals (Sweden)

    Lukić Tatjana

    2012-01-01

    Full Text Available Taking into consideration the importance and role of children in modern society, as well as their position, this article has as its focus juveniles in criminal procedure. The existence of a separate juvenile justice system independent of the criminal law applicable to the adult offenders and general criminal procedure, as well as the periodic changes of the dominant approach in theory and practice reflects the ascendancy of different theoretical perspectives in the juvenile justice. In this paper, the authors scrutinize the models of responding to juvenile crime - justice and welfare model - as two models of the greatest importance in the present reaction of the society to the crimes conducted by the youngest delinquents at the beginning of the new century and millennium. Furthermore, the paper deals with a matter of international legal standards which, to a large extent, give shape to the legal framework for juvenile offenders and provide their rights and position in the criminal procedure. The authors refer to the internationally accepted documents on several levels. From the (almost universally accepted multilateral conventions on human rights, through the field of recommendations, rules and guidelines which are obeyed and enforced in practice of the juvenile justice although they are of non-binding nature, via the regional European legislative to the national provisions in a particular number of countries. On all the levels mentioned above the rights of the juveniles are regulated having in mind their possible role in the criminal procedure as a perpetrator of a criminal act, as a victim or as a witness. This paper also analyzes the criminal procedure with respect to juvenile perpetrators of the criminal acts in the Republic of Serbia and compliance of the provisions currently in vigor with the international legal standards contained in the international conventions and other internationally accepted and recognized instruments.

  10. Organocatalytic cascade reactions as a new tool in total synthesis

    Science.gov (United States)

    Grondal, Christoph; Jeanty, Matthieu; Enders, Dieter

    2010-03-01

    The total synthesis of natural products and biologically active compounds, such as pharmaceuticals and agrochemicals, has reached an extraordinary level of sophistication. We are, however, still far away from the 'ideal synthesis' and the state of the art is still frequently hampered by lengthy protecting-group strategies and costly purification procedures derived from the step-by-step protocols. In recent years several new criteria have been brought forward to solve these problems and to improve total synthesis: atom, step and redox economy or protecting-group-free synthesis. Over the past decade the research area of organocatalysis has rapidly grown to become a third pillar of asymmetric catalysis standing next to metal and biocatalysis, thus paving the way for a new and powerful strategy that can help to address these issues - organocatalytic cascade reactions. In this Review we present the first applications of such asymmetric organocascade reactions to the total synthesis of natural products.

  11. A Novel Green Synthesis of Thalidomide and Analogs

    Directory of Open Access Journals (Sweden)

    Ellis Benjamin

    2017-01-01

    Full Text Available Thalidomide and its derivatives are currently under investigation for their antiangiogenic, immunomodulative, and anticancer properties. Current methods used to synthesize these compounds involve multiple steps and extensive workup procedures. Described herein is an efficient microwave irradiation green synthesis method that allows preparation of thalidomide and its analogs in a one-pot multicomponent synthesis system. The multicomponent synthesis system developed involves an array of cyclic anhydrides, glutamic acid, and ammonium chloride in the presence of catalytic amounts of 4-N,N-dimethylaminopyridine (DMAP to produce thalidomide and structurally related compounds within minutes in good isolated yields.

  12. Advances in the EDM-DEDM procedure.

    Science.gov (United States)

    Caliandro, Rocco; Carrozzini, Benedetta; Cascarano, Giovanni Luca; Giacovazzo, Carmelo; Mazzone, Anna Maria; Siliqi, Dritan

    2009-03-01

    The DEDM (difference electron-density modification) algorithm has been described in a recent paper [Caliandro et al. (2008), Acta Cryst. A64, 519-528]: it breaks down the collinearity between model structure phases and difference structure phase estimates. The new difference electron-density produced by DEDM, summed to the calculated Fourier maps, is expected to provide a representation of the full structure that is more accurate than that obtained by the observed Fourier synthesis. In the same paper, the DEDM algorithm was combined with the EDM (electron-density modification) approach to give the EDM-DEDM procedure which, when applied to practical molecular-replacement cases, was able to improve the model structures. In this paper, it is shown that EDM-DEDM suffers from some critical points that did not allow cyclical application of the procedure. These points are identified and modifications are made to allow iteration of the procedure. The applications indicate that EDM-DEDM may become a fundamental tool in protein crystallography.

  13. A training system for ultrasound-guided needle insertion procedures.

    Science.gov (United States)

    Zhu, Yanong; Magee, Derek; Ratnalingam, Rish; Kessel, David

    2007-01-01

    Needle placement into a patient body under guidance of ultrasound is a frequently performed procedure in clinical practice. Safe and successful performance of such procedure requires a high level of spatial reasoning and hand-eye co-ordination skills, which must be developed through intensive practice. In this paper we present a training system designed to improve the skills of interventional radiology trainees in ultrasound-guided needle placement procedures. Key issues involved in the system include surface and volumetric registration, solid texture modelling, spatial calibration, and real-time synthesis and rendering of ultrasound images. Moreover, soft tissue deformation caused by the needle movement and needle cutting is realised using a mass-spring-model approach. These have led to a realistic ultrasound simulation system, which has been shown to be a useful tool for the training of needle insertion procedures. Preliminary results of a construct evaluation study indicate the effectiveness and usefulness of the developed training system.

  14. Crown lengthening procedures

    Directory of Open Access Journals (Sweden)

    AA. Khoshkhonejad

    1994-06-01

    Full Text Available Nowadays, due to recent developments and researches in dental science, it is possible to preserve and restore previously extracted cases such as teeth with extensive caries, fractured or less appropriate cases for crown coverage as well as teeth with external perforation caused by restorative pins. In order to restore the teeth with preservation of periodontium, we should know thoroughly physiological aspects of periodontium and protection of Biologic Width which is formed by epithelial and supracrestal connective tissue connections. Considering biologic width is one of the principal rules of teeth restoration, otherwise we may destruct periodontal tissues. Several factors are involved in placing a restoration and one of the most important ones is where the restoration margin is terminated. Many studies have been conducted on the possible effects of restoration margin on the gingiva and due to the results of these studies it was concluded that restoration margin should be finished supragingivally. However, when we have to end the restoration under Gingival Crest, First a healthy gingival sulcus is required. Also, we should not invade the biological width. Since a normal biologic with is reported 2 mm and sound tooth tissue should be placed at least 2 mm coronal to the epithelial tissue, the distance between sound tooth tissue and crown margin should be at least 4mm. Thus, performing crown lengthening is essential to increase the clinical crown length. Basically, two objectives are considered: 1 restorative 2 esthetic (gummy smile Surgical procedure includes gingivectomy and flap procedure. Orthodontic procedure involves orthodontic extrusion or force eruption technique which is controlled vertical movements of teeth into occlusion. Besides, this procedure can also used to extrude teeth defects from the gingival tissue. By crown lengthening, tooth extraction is not required and furthermore, adjacent teeth preparation for placing a fixed

  15. Headache and endovascular procedures.

    Science.gov (United States)

    de Biase, Stefano; Longoni, Marco; Gigli, Gian Luigi; Agostoni, Elio

    2017-05-01

    The International Classification of Headache Disorders (ICHD-3 beta) includes headache attributed to intracranial endovascular procedures (EVPs). The aim of this review is to describe the clinical and pathophysiological aspects of headache related to vascular lesions and EVPs. Current studies regarding this issue are contradictory, although generally favouring headache improvement after EVPs. Further large studies are needed to adequately assess the effect of EVPs on headache.

  16. PACS policies and procedures.

    Science.gov (United States)

    Knepper, Daniel

    2007-01-01

    Documentation of policies and procedures are critical for the proper operation and management of a picture archival and communication system (PACS). Policies, procedures, and site specific documentation may be organized in several categories. Through the use of broad categories one can easily begin to break down the specific areas which require attention and prioritize them as necessary. One way to categorize them is: administration, maintenance, support, architecture and integration, and disaster recovery/business continuity. One area that requires a great deal of focus and discipline is a policy for "change management." It is essential to have a policy in place for making changes to the information system. This would include not only changes to the system such as software upgrades, but changes to workflows such as how images are being distributed, compression settings, network settings, monitor settings, locations of workstations, integration, and disaster recovery/ business continuity. Modifying existing information technology (IT) policies and using published resources can largely simplify the development of organization specific policies and procedures.

  17. A systematic synthesis and design methodology to achieve process intensification in (bio) chemical processes

    DEFF Research Database (Denmark)

    Lutze, Philip; Woodley, John; Gani, Rafiqul

    be intensified for biggest improvement, process synthesis and design tools are applied which results in the development of a systematic methodology incorporating PI. In order to manage the complexity of PI process options in which a feasible and optimal process solution may exist, the solution procedure......, the application of the computer-aided systematic synthesis and design methodology is highlighted via a case study which is the chemo-enzymatic synthesis of N-acetyl-D-neuraminic acid (Neu5Ac))....

  18. Synthesis method for using in the design of an electron gun for gyrotion

    International Nuclear Information System (INIS)

    Silva, C.A.B.

    1987-09-01

    In this work a synthesis method is applied to the design of an electron gun for a 94GHz gyrotron. Using the synthesis method, it is found the shape of the electrodes compatible with the laminar flow which minimizes the action of space change on the electron velocity dispersion. A sistematic procedure is presented to fuid the parameters of the synthesis method which, in turn, are closely related to the characteristics of the aptoclechonic system. (author) [pt

  19. DNA and RNA Synthesis in Animal Cells in Culture--Methods for Use in Schools

    Science.gov (United States)

    Godsell, P. M.; Balls, M.

    1973-01-01

    Describes the experimental procedures used for detecting DNA and RNA synthesis in xenopus cells by autoradiography. The method described is suitable for senior high school laboratory classes or biology projects, if supervised by a teacher qualified to handle radioisotopes. (JR)

  20. Rapid Analysis Procedures for Triglycerides and Fatty Acids as Pentyl and Phenethyl Esters for the Detection of Butter Adulteration Using Chromatographic Techniques

    Directory of Open Access Journals (Sweden)

    Daniele Naviglio

    2017-01-01

    Full Text Available This paper presents the development of three methods for quality control, fraud detection, and authentication of butter fat and other oils/fats using chromatographic techniques, with one method for triglycerides and two methods for fatty acids (FAs. The procedure for the analysis of triglycerides requires only dissolution of the sample in n-hexane and gas chromatography (GC analysis using a capillary column. The second method is based on the transesterification of triglycerides as pentyl esters in a single-step reaction using sodium pentanoate in pentanol. The reaction proceeds at room temperature and is similar to the potassium hydroxide-catalysed transesterification of triglycerides with methanol and even more similar to the sodium methoxide method and sodium butanoate method. The advantage of using pentyl esters includes reducing the volatility of short-chain FAs, and substantial recoveries were obtained compared with methyl ester analysis. The third method involves the transesterification of triglycerides in fat through reaction with 2-phenylethanol in a single step; 2-phenylethanol possesses a chromophore, and the phenethyl esters formed are analysed by high-performance liquid chromatography (HPLC with UV detection.

  1. Rational design of the gram-scale synthesis of nearly monodisperse semiconductor nanocrystals

    NARCIS (Netherlands)

    Protiere, Myriam; Nerambourg, Nicolas; Renard, Olivier; Reiss, Peter

    2011-01-01

    ABSTRACT: We address two aspects of general interest for the chemical synthesis of colloidal semiconductor nanocrystals: (1) the rational design of the synthesis protocol aiming at the optimization of the reaction parameters in a minimum number of experiments; (2) the transfer of the procedure to

  2. STIR: Redox-Switchable Olefin Polymerization Catalysis: Electronically Tunable Ligands for Controlled Polymer Synthesis

    Science.gov (United States)

    2013-03-28

    were reduced using standard hydrogenation conditions with hydrogen and palladium on carbon . Though the synthesis of 1,1’-diaminoferrocene has...forward reduction of diimine 7 proved unusually difficult under typical conditions, although a stepwise procedure utilizing formic acid and sodium...REPORT Final Report: STIR: Redox-Switchable Olefin Polymerization Catalysis: Electronically Tunable Ligands for Controlled Polymer Synthesis 14

  3. Outcome of the bone-anchored hearing aid procedure without skin thinning: a prospective clinical trial.

    Science.gov (United States)

    Hultcrantz, Malou

    2011-09-01

    To evaluate the outcome of Bone-Anchored Hearing Aid surgery without skin thinning, a test group with direct implantation without such thinning was compared with a control group that underwent the traditional procedure. This was a single-center, prospective clinical trial designed to evaluate a novel approach to Bone-Anchored Hearing Aid implantation. Eligible patients were enrolled consecutively in the test group or selected to be age-matched controls. University Hospital. Eighteen adult patients, suffering from hearing loss, suitable for implantable hearing aid. Single-step surgery was performed on 18 patients under local anesthesia. In 9 of these, a linear incision was made, a hole was punched through the skin above the bone-anchored implant, and a longer abutment (8.5-12 mm) was introduced, whereas the other 9 were subjected to the standard protocol, using a dermatome and skin thinning. All of the patients were followed for 12 months. The test group exhibited good preservation of the tissue, no increasing skin reactions and no adverse events. The time required for this surgery was reduced, as was their healing time. These patients also experienced less numbness and pain in the surrounding area and had an improved cosmetic outcome. MAIN OUTCOME AND CONCLUSION: This clinical trial indicates that introduction of the abutment to the osseointegrated screw directly through the skin, without skin thinning, could be beneficial. This approach had fewer negative effects than the conventional procedure during the 12- month follow-up period.

  4. Surface cleanliness measurement procedure

    Science.gov (United States)

    Schroder, Mark Stewart; Woodmansee, Donald Ernest; Beadie, Douglas Frank

    2002-01-01

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  5. Dispersant field monitoring procedures

    International Nuclear Information System (INIS)

    Hillman, S. O.; Hood, S. D.; Bronson, M. T.; Shufelt, G.

    1997-01-01

    Alyeska Pipeline Service Company's (APSC) dispersant response capability in the Port of Valdez, Prince William Sound, and in the Gulf of Alaska was described. APSC provides dispersal equipment, aerial spray delivery systems, helibucket delivery systems, vessel delivery systems, along with a minimum of 600,000 gallon stockpile of the dispersant Corexit 9527. Effectiveness and effects are monitored by visual observation. In addition, fluorometer and water sample analysis are also used to provide field analytical data indicative of the environmental effects of dispersant applications. The field monitoring plan was field tested in December 1996. Details of the monitoring procedures are outlined in this paper. 18 refs., 5 tabs

  6. Interventional spinal procedures

    Energy Technology Data Exchange (ETDEWEB)

    Andreula, Cosma E-mail: cosmaandreula@tin.it; Muto, Mario; Leonardi, Marco

    2004-05-01

    The interventional procedures for disk herniation and protrusion by percutaneous techniques are decompressive such as chemodiscolysis with chimopapain, nucleo-discectomy introduced by Onik, LASER discectomy, and recently nucleoplasty, and decompressive and direct antinflammatory such as chemiodiscolysis with an Oxygen-ozone mixture. These techniques have minimized the invasive nature of surgery and avoid or decrease complications like infection linked to surgery. Reducing intervertebral disc size by mechanical aspiration of a part of the disc or partially dissolving the herniation by drying reduces the conic pressure on the torn annulus and creates the space necessary for retropulsion whenever the circular fibres of the annulus regain a minimum capacity to contain the disc under tension. The proposed suggestion in these techniques is that a small change in volume produces large change in pressure. The success rates reported in different studies vary from 65 to 80% of excellent or good results with chemonucleolysis and aspiration. Vertebroplasty (VP) is done by percutaneous injection of acrylic cement (polymethylmetacrylate-PMMA) into the vertebrae under fluoroscopic and/or CT control to achieve an antalgic effect and stabilize the vertebral body. VP has been used for vertebral collapses caused by osteoporosis, long-term steroid treatment, aggressive symptomatic angiomas and lytic metastasis. The reported figures in literature are 80-95% of pain relief, within 7 days after procedure, commonly on the same day.

  7. Evidence in criminal procedure

    Directory of Open Access Journals (Sweden)

    Paolo Ferrua

    2018-03-01

    Full Text Available This paper analyzes the three components of the evidence operation: proof premises or evidence in the strict sense, with particular regard to the distinction between evidence declaration and critical/circumstantial evidence; the propositions to be proved, principal or incidental, final or intermediate; the act of proving, connoted by the rule of beyond all reasonable doubt. While the first two terms vary according to the procedural context, the third remains indefectible, since it is incongruous to consider any proposition to be 'proven' while there is a reasonable reason to doubt it. With regard to the distribution of the burden of proof, the structure of the case and its legal qualification, whether substantial or procedural, are decisive. Therefore, it is possible to identify, for each decision alternative, the term 'marked', which conveys the proposition to be proved, and the opposite 'consequential' term, which derives from the failure to reach the proof: for example, with respect to the main object in trial, the term 'marked' is the conviction, the term 'consequential' the acquittal.

  8. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-07-25

    The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.

  9. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-09-30

    The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.

  10. Ergonomic Synthesis Suitable for Industrial Production of Silver-Festooned Zinc Oxide Nanorods

    Science.gov (United States)

    Khan, G. R.; Khan, R. A.

    2015-07-01

    For maximizing productivity, minimizing cost, time-boxing process and optimizing human effort, a single-step, cost-effective, ultra-fast and environmentally benign synthesis suitable for industrial production of nanocrystalline ZnO, and Ag-doped ZnO has been reported in this paper. The synthesis based on microwave-supported aqueous solution method used zinc acetate dehydrate and silver nitrate as precursors for fabrication of nanorods. The synthesized products were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and UV-Vis-NIR spectroscopy. The undoped and Ag-doped ZnO nanorods crystallized in a hexagonal wurtzite structure having spindle-like morphology. The blue shift occurred at absorption edge of Ag-doped ZnO around 260 nm compared to 365 nm of bulk ZnO. The red shift occurred at Raman peak site of 434 cm-1 compared to characteristic wurtzite phase peak of ZnO (437 cm-1). The bandgap energies were found to be 3.10 eV, 3.11 eV and 3.18 eV for undoped, 1% Ag-doped, and 3% Ag-doped ZnO samples, respectively. The TEM results provided average particle sizes of 17 nm, 15 nm and 13 nm for undoped, and 1% and 3% Ag-doped ZnO samples, respectively.

  11. Cellulase assisted synthesis of nano-silver and gold: Application as immobilization matrix for biocatalysis.

    Science.gov (United States)

    Mishra, Abhijeet; Sardar, Meryam

    2015-01-01

    In the present study, we report in vitro synthesis of silver and gold nanoparticles (NPs) using cellulase enzyme in a single step reaction. Synthesized nanoparticles were characterized by UV-VIS spectroscopy, Dynamic Light Spectroscopy (DLS), Transmission Electron Microscopy (TEM), Energy-dispersive X-ray Spectroscopy (EDX), X-ray Diffraction (XRD), Circular Dichroism (CD) and Fourier Transform Infrared Spectroscopy (FTIR). UV-visible studies shows absorption band at 415nm and 520nm for silver and gold NPs respectively due to surface plasmon resonance. Sizes of NPs as shown by TEM are 5-25nm for silver and 5-20nm for gold. XRD peaks confirmed about phase purity and crystallinity of silver and gold NPs. FTIR data shows presence of amide I peak on both the NPs. The cellulase assisted synthesized NPs were further exploited as immobilization matrix for cellulase enzyme. Thermal stability analysis reveals that the immobilized cellulase on synthesized NPs retained 77-80% activity as compared to free enzyme. While reusability data suggests immobilized cellulase can be efficiently used up to sixth cycles with minimum loss of enzyme activity. The secondary structural analysis of cellulase enzyme during the synthesis of NPs and also after immobilization of cellulase on these NPs was carried out by CD spectroscopy. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Spray-combustion synthesis: efficient solution route to high-performance oxide transistors.

    Science.gov (United States)

    Yu, Xinge; Smith, Jeremy; Zhou, Nanjia; Zeng, Li; Guo, Peijun; Xia, Yu; Alvarez, Ana; Aghion, Stefano; Lin, Hui; Yu, Junsheng; Chang, Robert P H; Bedzyk, Michael J; Ferragut, Rafael; Marks, Tobin J; Facchetti, Antonio

    2015-03-17

    Metal-oxide (MO) semiconductors have emerged as enabling materials for next generation thin-film electronics owing to their high carrier mobilities, even in the amorphous state, large-area uniformity, low cost, and optical transparency, which are applicable to flat-panel displays, flexible circuitry, and photovoltaic cells. Impressive progress in solution-processed MO electronics has been achieved using methodologies such as sol gel, deep-UV irradiation, preformed nanostructures, and combustion synthesis. Nevertheless, because of incomplete lattice condensation and film densification, high-quality solution-processed MO films having technologically relevant thicknesses achievable in a single step have yet to be shown. Here, we report a low-temperature, thickness-controlled coating process to create high-performance, solution-processed MO electronics: spray-combustion synthesis (SCS). We also report for the first time, to our knowledge, indium-gallium-zinc-oxide (IGZO) transistors having densification, nanoporosity, electron mobility, trap densities, bias stability, and film transport approaching those of sputtered films and compatible with conventional fabrication (FAB) operations.

  13. Chemical synthesis, phase transformation and magnetic proprieties of FePt and FePd nanoparticles

    International Nuclear Information System (INIS)

    Delattre, Anastasia

    2010-01-01

    This work aims at understanding the chemical synthesis of FePt and FePd nanoparticles (NPs), and at exploring how to implement the phase transformation from the chemically disordered to the L10 phase, without coalescence. Using hexadecanenitrile instead of oleylamine, we obtain NPs with a more homogenous internal composition, instead of core-shell NPs. Through a systematic study (designed experiment relying on Taguchi tables), we developed the FePd synthesis, while evidencing the role of each ligand and of the reductor. To induce the crystalline phase transformation while avoiding coalescence, we explored two ways. In the first one, atomic vacancies are introduced in the NPs through light ion irradiation, atomic mobility being ensured by annealing at moderate temperature (300 C). As a result, the blocking temperature is multiplied by 4, due to anisotropy enhancement. However, strong chemical ordering in the L10 phase cannot be achieved. The second approach relies on the dispersion of the NPs in a salt (NaCl) matrix, prior to annealing at 700 C: high chemical ordering is achieved, and the blocking temperature is beyond 400 C. We then developed a single-step process to remove the salt by dissolution in water and to re-disperse NPs in stable aqueous or organics solutions. These high magnetic anisotropy NPs are then readily available for further chemical or manipulation steps, with applied perspectives in areas such as data storage, or biology. (author)

  14. Heterogeneous Pd catalysts as emulsifiers in Pickering emulsions for integrated multistep synthesis in flow chemistry.

    Science.gov (United States)

    Hiebler, Katharina; Lichtenegger, Georg J; Maier, Manuel C; Park, Eun Sung; Gonzales-Groom, Renie; Binks, Bernard P; Gruber-Woelfler, Heidrun

    2018-01-01

    Within the "compartmentalised smart factory" approach of the ONE-FLOW project the implementation of different catalysts in "compartments" provided by Pickering emulsions and their application in continuous flow is targeted. We present here the development of heterogeneous Pd catalysts that are ready to be used in combination with biocatalysts for catalytic cascade synthesis of active pharmaceutical ingredients (APIs). In particular, we focus on the application of the catalytic systems for Suzuki-Miyaura cross-coupling reactions, which is the key step in the synthesis of the targeted APIs valsartan and sacubitril. An immobilised enzyme will accomplish the final product formation via hydrolysis. In order to create a large interfacial area for the catalytic reactions and to keep the reagents separated until required, the catalyst particles are used to stabilise Pickering emulsions of oil and water. A set of Ce-Sn-Pd oxides with the molecular formula Ce 0.99- x Sn x Pd 0.01 O 2-δ ( x = 0-0.99) has been prepared utilising a simple single-step solution combustion method. The high applicability of the catalysts for different functional groups and their minimal leaching behaviour is demonstrated with various Suzuki-Miyaura cross-coupling reactions in batch as well as in continuous flow employing the so-called "plug & play reactor". Finally, we demonstrate the use of these particles as the sole emulsifier of oil-water emulsions for a range of oils.

  15. Green chemistry approach for the synthesis and stabilization of biocompatible gold nanoparticles and their potential applications in cancer therapy

    International Nuclear Information System (INIS)

    Mukherjee, Sudip; Sushma, V; Patra, Sujata; Barui, Ayan Kumar; Bhadra, Manika Pal; Patra, Chitta Ranjan; Sreedhar, Bojja

    2012-01-01

    The biological approach to synthesis of AuNPs is eco-friendly and an ideal method to develop environmentally sustainable nanoparticles alternative to existing methods. We have developed a simple, fast, clean, efficient, low-cost and eco-friendly single-step green chemistry approach for the synthesis of biocompatible gold nanoparticles (AuNPs) from chloroauric acid (HAuCl 4 ) using a water extract of Eclipta Alba leaves at room temperature. The AuNPs using Eclipta extract have been formed in very short time, even in less than 10 min. The as-synthesized AuNPs were thoroughly characterized by several physico-chemical techniques. The in vitro stability of as-synthesized AuNPs was studied in different buffer solutions. A plausible mechanism for the synthesis of AuNPs by Eclipta extract has been discussed. The biocompatibility of AuNPs was observed by in vitro cell culture assays. Finally, we have designed and developed a AuNPs-based drug delivery system (DDS) (Au-DOX) containing doxorubicin (DOX), a FDA approved anticancer drug. Administration of this DDS to breast cancer cells (MCF-7 and MDA-MB-231) shows significant inhibition of breast cancer cell proliferation compared to pristine doxorubicin. Therefore we strongly believe that the use of Eclipta Alba offers large-scale production of biocompatible AuNPs that can be used as a delivery vehicle for the treatment of cancer diseases. (paper)

  16. Synthesis of ferroelectric nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Roervik, Per Martin

    2008-12-15

    respectively BaTi2O5/BaTi5O11 and Na2Ti6O13 for the two different systems, in contradiction to the previous studies. It was shown that NaCl reacted with BaO(PbO) resulting in loss of volatile BaCl2 (PbCl2 ) and formation and preferential growth of titanium oxide-rich nanorods instead of the target phase BaTiO3 (or PbTiO3 ). The molten salt synthesis route may therefore not necessarily yield nanorods of the target ternary oxide as reported previously. In addition, the importance of NaCl(g) for the growth of nanorods below the melting point of NaCl was demonstrated in a special experimental setup, where NaCl and the precursors were physically separated. In Paper II and III, a hydrothermal synthesis method to grow arrays and hierarchical nanostructures of PbTiO3 nanorods and platelets on substrates is presented. Hydrothermal treatment of an amorphous PbTiO3 precursor in the presence of a surfactant and PbTiO3 or SrTiO3 substrates resulted in the growth of PbTiO3 nanorods and platelets aligned in the crystallographic <100> orientations of the SrTiO3 substrates. PbTiO3 nanorods oriented perpendicular to the substrate surface could also be grown directly on the substrate by a modified synthesis method. The hydrothermal method described in Paper II and III was developed on the basis of the method described in Appendices I and II. In Paper IV, a template-assisted method to make PbTiO3 nanotubes is presented. An equimolar Pb-Ti sol was dropped onto porous alumina membranes and penetrated into the channels of the template. Single-phase PbTiO3 perovskite nanotubes were obtained by annealing at 700 degrees Celsius for 6 h. The nanotubes had diameters of 200 - 400 nm with a wall thickness of approximately 20 nm. Excess PbO or annealing in a Pb-containing atmosphere was not necessary in order to achieve single phase PbTiO3 nanotubes. The influence of the heating procedure and the sol concentration is discussed. In Paper V, a piezoresponse force microscopy study of single PbTiO3 nanorods is

  17. Preschooler test or procedure preparation

    Science.gov (United States)

    ... your child during and after the procedure with books, songs, counting, deep breathing, or blowing bubbles. PLAY ... can be present during the procedure. Ask if anesthesia can be used to reduce your child's discomfort. ...

  18. Toddler test or procedure preparation

    Science.gov (United States)

    ... use after the procedure. Distract your child with books, songs, or a simple activity such as blowing ... can be present during the procedure. Ask if anesthesia can be used, if appropriate, to reduce your ...

  19. Optimal data verification procedures

    International Nuclear Information System (INIS)

    Avenhaus, R.; Busse, S.; Piehlmeier, G.

    1991-01-01

    In order to verify the material balance data reported by plant operators, the safeguards authority performs independent measurements on a random sampling basis and compares the resulting data with the reported ones. It is shown that the so-called D-statistic, which originally has been justified with heuristic arguments and since then has been used in practice for many years, is optimal if the total assumed falsification is small. Furthermore, numerical calculations indicate that for larger total falsification, where a more complicated test procedure would be optimal, the D-test is still useful from a practical point of view. For very large total falsification, the optimal test statistic is complicated; this, however, is not so important since here one is approaching the attribute sampling area

  20. Robust procedures in chemometrics

    DEFF Research Database (Denmark)

    Kotwa, Ewelina

    -way chemometrical methods, such as PCA and PARAFAC models for analysing spatial and depth profiles of sea water samples, defined by three data modes: depth, variables and geographical location. Emphasis was also put on predicting fluorescence values, as being a natural measure of biological activity, by applying...... if contamination in the data is present. For this becoming a standard procedure, further work is required, aiming at implementing reliable robust algorithms into standard statistical programs.......The general aim of the thesis was to contribute to the improvement of data analytical techniques within the chemometric field. Regardless the multivariate structure of the data, it is still common in some fields to perform uni-variate data analysis using only simple statistics such as sample mean...

  1. Protein chemical synthesis by α-ketoacid-hydroxylamine ligation.

    Science.gov (United States)

    Harmand, Thibault J; Murar, Claudia E; Bode, Jeffrey W

    2016-06-01

    Total chemical synthesis of proteins allows researchers to custom design proteins without the complex molecular biology that is required to insert non-natural amino acids or the biocontamination that arises from methods relying on overexpression in cells. We describe a detailed procedure for the chemical synthesis of proteins with the α-ketoacid-hydroxylamine (KAHA ligation), using (S)-5-oxaproline (Opr) as a key building block. This protocol comprises two main parts: (i) the synthesis of peptide fragments by standard fluorenylmethoxycarbonyl (Fmoc) chemistry and (ii) the KAHA ligation between fragments containing Opr and a C-terminal peptide α-ketoacid. This procedure provides an alternative to native chemical ligation (NCL) that could be valuable for the synthesis of proteins, particularly targets that do not contain cysteine residues. The ligation conditions-acidic DMSO/H2O or N-methyl-2-pyrrolidinone (NMP)/H2O-are ideally suited for solubilizing peptide segments, including many hydrophobic examples. The utility and efficiency of the protocol is demonstrated by the total chemical synthesis of the mature betatrophin (also called ANGPTL8), a 177-residue protein that contains no cysteine residues. With this protocol, the total synthesis of the betatrophin protein has been achieved in around 35 working days on a multimilligram scale.

  2. Synthesis of B6 vitamin

    Directory of Open Access Journals (Sweden)

    Vučijak Nevena Ž.

    2009-01-01

    Full Text Available The importance of vitamin B6 has been known since its discovery in the 1940's. Chemical tests, elestrometric titration determinations, and absorption spectrum studies showed that this vitamin exists in three major chemical forms: pyridoxine (an alcohol, pyridoxal (an aldehyde, and pyridoxamine (a primary amine. Vitamin B6 is needed for more than 100 enzymes involved in protein metabolism, and it is assumed that this vitamin is cofactor of metabolic processes more important than any other substance. A deficiency of vitamin B6 in the human diet leads to severe disorders. Vitamin B6 is necessary for the proper function of the immune and nervous system, and helps the body convert protein to energy. This paper describes the history, properties and applications of vitamin B6, elucidation of chemical structure, and different procedures for synthesis of pyridoxine and pyridoxamine.

  3. Flame synthesis of zinc oxide nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Merchan-Merchan, Wilson, E-mail: wmerchan-merchan@ou.edu [School of Aerospace and Mechanical Engineering, University of Oklahoma, Norman, OK 73019 (United States); Farahani, Moien Farmahini [School of Aerospace and Mechanical Engineering, University of Oklahoma, Norman, OK 73019 (United States)

    2013-02-01

    Highlights: Black-Right-Pointing-Pointer We report a single-step flame method for the synthesis of Zn oxide nanocrystals. Black-Right-Pointing-Pointer Diverse flame positions lead to a variation of Zn oxide nanocrystal growth. Black-Right-Pointing-Pointer The synthesized crystals have polyhedral, pipet- and needle-like shape. Black-Right-Pointing-Pointer High length-to-diameter aspect-ratio crystals appear in a higher temperature flame. Black-Right-Pointing-Pointer The crystal growth mechanism corresponds to vapor-to-solid conversion. - Abstract: Distinctive zinc oxide (ZnO) nanocrystals were synthesized on the surface of Zn probes using a counter-flow flame medium formed by methane/acetylene and oxygen-enriched air streams. The source material, a zinc wire with a purity of {approx}99.99% and diameter of 1 mm, was introduced through a sleeve into the oxygen rich region of the flame. The position of the probe/sleeve was varied within the flame medium resulting in growth variation of ZnO nanocrystals on the surface of the probe. The shape and structural parameters of the grown crystals strongly depend on the flame position. Structural variations of the synthesized crystals include single-crystalline ZnO nanorods and microprisms (ZMPs) (the ZMPs have less than a few micrometers in length and several hundred nanometers in cross section) with a large number of facets and complex axial symmetry with a nanorod protruding from their tips. The protruding rods are less than 100 nm in diameter and lengths are less than 1 {mu}m. The protruding nanorods can be elongated several times by increasing the residence time of the probe/sleeve inside the oxygen-rich flame or by varying the flame position. At different flame heights, nanorods having higher length-to-diameter aspect-ratio can be synthesized. A lattice spacing of {approx}0.26 nm was measured for the synthesized nanorods, which can be closely correlated with the (0 0 2) interplanar spacing of hexagonal ZnO (Wurtzite) cells

  4. Quantization Procedures; Sistemas de cuantificacion

    Energy Technology Data Exchange (ETDEWEB)

    Cabrera, J. A.; Martin, R.

    1976-07-01

    We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs.

  5. Simplified Civil Procedure in Japan

    NARCIS (Netherlands)

    E. Sugiyama (Etsuko)

    2015-01-01

    textabstractJapanese civil procedure covers four types of simplified procedures: ordinary proceedings in summary courts; actions on bills, notes, and checks; actions on small claims; and payment orders. Actions on small claims were newly introduced as civil procedure in 1996 to promote public access

  6. A Review and Modern Approach to LC Ladder Synthesis

    Directory of Open Access Journals (Sweden)

    Alexander J. Casson

    2011-01-01

    Full Text Available Ultra low power circuits require robust and reliable operation despite the unavoidable use of low currents and the weak inversion transistor operation region. For analogue domain filtering doubly terminated LC ladder based filter topologies are thus highly desirable as they have very low sensitivities to component values: non-exact component values have a minimal effect on the realised transfer function. However, not all transfer functions are suitable for implementation via a LC ladder prototype, and even when the transfer function is suitable the synthesis procedure is not trivial. The modern circuit designer can thus benefit from an updated treatment of this synthesis procedure. This paper presents a methodology for the design of doubly terminated LC ladder structures making use of the symbolic maths engines in programs such as MATLAB and MAPLE. The methodology is explained through the detailed synthesis of an example 7th order bandpass filter transfer function for use in electroencephalogram (EEG analysis.

  7. Total Synthesis of Avrainvilleol.

    Science.gov (United States)

    Wegener, Aaron; Miller, Kenneth A

    2017-11-03

    The first total synthesis of the marine natural product avrainvilleol is reported. The total synthesis features the first application of the transition-metal-free coupling of a tosyl hydrazone and a boronic acid to the preparation of a complex natural product, and the first example of this coupling with a hindered diortho substituted hydrazone substrate.

  8. Difluoromethylenephosphonates: synthesis and transformations

    International Nuclear Information System (INIS)

    Chunikhin, Konstantin S; Kadyrov, A A; Pasternak, P V; Chkanikov, Nikolai D

    2010-01-01

    The data on the synthesis of organic compounds containing the difluoromethylenephosphonate group are analyzed and generalized. The attention is focused on the introduction of this group into various organic molecules and subsequent transformations of the compounds thus formed. Individual sections are devoted to the synthesis of heterocyclic compounds and analogues of natural substances containing difluoromethylenephosphonate groups.

  9. Synthesis of Isoiminosugars

    DEFF Research Database (Denmark)

    Hyldtoft, Lene; Godskesen, Michael Anders; Lundt, Inge

    1998-01-01

    A short synthesis of isoiminosugars have been developed. Bromolactones are diastereoselectively alkylated at C-2 followed by ring closure to the corresponding lactams. Reduction of these then gives isoiminosugars......A short synthesis of isoiminosugars have been developed. Bromolactones are diastereoselectively alkylated at C-2 followed by ring closure to the corresponding lactams. Reduction of these then gives isoiminosugars...

  10. Synthesis of oligonucleotide phosphorodithioates

    DEFF Research Database (Denmark)

    Beaton, G.; Brill, W. K D; Grandas, A.

    1991-01-01

    The synthesis of DNA containing sulfur at the two nonbonding internucleotide valencies is reported. Several different routes using either tervalent or pentavalent mononucleotide synthons are described.......The synthesis of DNA containing sulfur at the two nonbonding internucleotide valencies is reported. Several different routes using either tervalent or pentavalent mononucleotide synthons are described....

  11. Saccharide-based Approach to Green Metallic Nanostructure Synthesis

    DEFF Research Database (Denmark)

    Engelbrekt, Christian; Sørensen, Karsten Holm; Jensen, Palle Skovhus

    A green approach to solution synthesis of metallic nanoparticles has been developed using harmless and bioapplicable chemicals as well as moderate temperatures. Metal precursors are reduced by glucose/buffers and sterically stabilized by starch. The saccharide based procedure is highly diverse...

  12. One-pot synthesis of quinaldine derivatives by using microwave ...

    Indian Academy of Sciences (India)

    Administrator

    Combes reactions have been developed for the preparation of quinolines. A number of other methods have been reported for the synthesis of quinolines involving a variety of metal catalysts and Lewis acids. However, many of these procedures are not fully satisfactory with regard to operational simplicity, cost of the reagent ...

  13. Synthesis of Ethyl Nalidixate: A Medicinal Chemistry Experiment

    Science.gov (United States)

    Leslie, Ray; Leeb, Elaine; Smith, Robert B.

    2012-01-01

    A series of laboratory experiments that complement a medicinal chemistry lecture course in drug design and development have been developed. The synthesis of ethyl nalidixate covers three separate experimental procedures, all of which can be completed in three, standard three-hour lab classes and incorporate aspects of green chemistry such as…

  14. Synthesis of glycoluril catalyzed by potassium hydroxide under ultrasound irradiation.

    Science.gov (United States)

    Li, Ji-Tai; Liu, Xiao-Ru; Sun, Ming-Xuan

    2010-01-01

    Synthesis of the glycolurils catalyzed by potassium hydroxide was carried out in 17-75% yield at 40 degrees C in EtOH under ultrasound irradiation. Compared to the method using stirring, the main advantage of the present procedure is milder conditions and shorter reaction time.

  15. One-pot synthesis of quinaldine derivatives by using microwave ...

    Indian Academy of Sciences (India)

    Abstract. A convenient and efficient procedure for synthesis of quinaldine derivatives has been developed by a simple one-pot reaction of aniline derivatives and acetaldehyde on the surface of neutral alumina impregnated with hydrochloric acid under microwave irradiation without any solvent according to green chemistry.

  16. Microwave-assisted low temperature synthesis of sodium zirconium ...

    Indian Academy of Sciences (India)

    Administrator

    Abstract. Microwave-assisted procedure for low temperature solid state synthesis of sodium zirconium phosphate (NZP), a material with the potential for immobilization and disposal of high level nuclear waste, was developed. Three selected fission products, namely, Cesium, Strontium and Tellurium were introduced ...

  17. Synthesis of ()-albrassitriol and ()-6-epi-albrassitriol from (+)-larixol

    NARCIS (Netherlands)

    Vlad, P.F.; Ciocarlan, A.; Coltsa, M.; Edu, C.; Biriiac, A.; Barba, A.; Deleanu, C.; Nicolescu, A.; Ambrosio, D' M.; Groot, de Æ.

    2013-01-01

    A novel synthesis of natural drimanic compounds, ()-albrassitriol (2) and ()-6-epi-albrassitriol (3), has been carried out starting from an easily available labdane diterpenoid, (+)-larixol (1). In a two-step procedure, (+)-larixol (1) was converted into 14,15-bisnorlab-7-ene-6,13-dione (9), which

  18. A Solvent-free Synthesis of Polyhydroquinolines via Hantzsch ...

    African Journals Online (AJOL)

    A simple and efficient procedure for the synthesis of polyhydroquinolines was developed, involving a one-pot four-component Hantzsch condensation of aromatic aldehydes, 1,3-cyclohexanediones, alkyl acetoacetate and ammonium acetate in the presence of a catalytic amount of nanomagnetic-supported sulfonic acid ...

  19. Microwave-assisted low temperature synthesis of sodium zirconium ...

    Indian Academy of Sciences (India)

    Microwave-assisted procedure for low temperature solid state synthesis of sodium zirconium phosphate (NZP), a material with the potential for immobilization and disposal of high level nuclear waste, was developed. Three selected fission products, namely, Cesium, Strontium and Tellurium were introduced (substituted) in ...

  20. Microwave-assisted low temperature synthesis of sodium zirconium

    Indian Academy of Sciences (India)

    Microwave-assisted procedure for low temperature solid state synthesis of sodium zirconium phosphate (NZP), a material with the potential for immobilization and disposal of high level nuclear waste, was developed. Three selected fission products, namely, Cesium, Strontium and Tellurium were introduced (substituted) in ...

  1. The synthesis of 16-dehydropregnenolone acetate (DPA) from potato glycoalkaloids

    NARCIS (Netherlands)

    Vronen, P.J.E.; Koval, N.; Groot, de Æ.

    2004-01-01

    The use of solanidine as starting material for the synthesis of steroid hormones was strongly stimulated by the possibility to isolate large amounts ( ton scale) of potato glycoalkaloids from a waste stream of the potato starch production. A procedure is available to isolate these glycoalkaloids

  2. Pivalolactone, 2. Copolyester synthesis via interchange reactions with polypivalolactone

    NARCIS (Netherlands)

    Tijsma, Edze Jan; Tijsma, E.J.; van der Does, L.; Bantjes, A.; Bantjes, Adriaan; Vulic, Ivan; Werumeus Buning, Gerard Hidde

    1993-01-01

    The synthesis of copolyesters via interchange reactions of polypivalolactone (PPVL) with several compounds was studied. The synthetical procedures are two-stage melt processes: in the first stage ester bonds in the polymer chain are cleaved and new groups are incorporated in the polymer chain, while

  3. The Efficient Synthesis of 2-Arylamino-2-imidazolines, 2-Heteroaryl ...

    African Journals Online (AJOL)

    collected by filtration and recrystallized from ethanol. Charac- teristic data for the products 3a–e are listed in Table 1. Synthesis of dimethyl aryldithioimidocarbonates 5a-c. General procedure. To a well-stirred cold solution of aromatic amines (0.05 mol) in. DMF (20 ml) were added aqueous NaOH (20M, 4 ml), carbon.

  4. Synthesis of New dihydropyrimidinones catalysed by dicationic ionic ...

    Indian Academy of Sciences (India)

    Thus obtained solid mass was filtered, washed with water and dried. Sim- ilarly the other compounds, (5 b–f) of the series were synthesized. 2.3 Experimental procedure for the synthesis of. (2-chloroquinolin-3-yl) methanol 8a. To the solution of 2-chloro-3-formyl quinoline (10g,. 52mmol) in methanol (100mL), NaBH4.

  5. Microwave-Assisted Synthesis of "N"-Phenylsuccinimide

    Science.gov (United States)

    Shell, Thomas A.; Shell, Jennifer R.; Poole, Kathleen A.; Guetzloff, Thomas F.

    2011-01-01

    A microwave-assisted synthesis of "N"-phenylsuccinimide has been developed for the second-semester organic teaching laboratory. Utilizing this procedure, "N"-phenylsuccinimide can be synthesized in moderate yields (40-60%) by heating a mixture of aniline and succinic anhydride in a domestic microwave oven for four minutes. This technique reduces…

  6. Convenient synthesis of naphthopyrans using montmorillonite K-10 ...

    Indian Academy of Sciences (India)

    Abstract. A simple and mild procedure for the synthesis of different naphthopyrans providing high yields in a short reaction time was reported. The reaction of propargylic alcohols with α- or β-naphthol and dihy- droxy naphthalenes in the presence of montmorillonite K-10 was studied. This reaction afforded high yields.

  7. The synthesis of some unsaturated 4-substituted-g-lactones

    OpenAIRE

    SUREN HUSINEC; VLADIMIR SAVIC

    2000-01-01

    The synthesis of conjugated and nonconjugated unsaturated 4-substituted lactones of type 1 and 2 are described. The type 1 lactone was prepared by a two step procedure employing Bredereck's reagent. The type 2 lactone was synthesised by combining the Claisen-Ireland rearrangement and selenolactonisation.

  8. The synthesis of some unsaturated 4-substituted-g-lactones

    Directory of Open Access Journals (Sweden)

    SUREN HUSINEC

    2000-02-01

    Full Text Available The synthesis of conjugated and nonconjugated unsaturated 4-substituted lactones of type 1 and 2 are described. The type 1 lactone was prepared by a two step procedure employing Bredereck's reagent. The type 2 lactone was synthesised by combining the Claisen-Ireland rearrangement and selenolactonisation.

  9. SYNTHESIS, ANALYSIS AND SIMULATION OF A FOUR-BAR ...

    African Journals Online (AJOL)

    Generation problem of kinematic synthesis of a four-bar mechanism. The synthesized mechanism is then analyzed .for determining its motion characteristics. These results are then used for the animation of the mechanism. Conventional mechanism design procedures using card board models, prototypes of the mechanism,.

  10. The Synthesis of Nitrogen-Doped Multiwalled Carbon Nanotubes ...

    African Journals Online (AJOL)

    NICO

    produced via non-catalytic synthesis procedures and contain nitrogen. 3.2. Yield of N-MWCNTs. In this study the yields have been determined from the amount of carbon deposited relative to the amount of carbon passed over the catalyts, e.g. a yield of 16 % was obtained at. RESEARCH ARTICLE. Z.N. Tetana, S.D. ...

  11. Metal-Acetylacetonate Synthesis Experiments: Which Is Greener?

    Science.gov (United States)

    Ribeiro, M. Gabriela T. C.; Machado, Adlio A. S. C.

    2011-01-01

    A procedure for teaching green chemistry through laboratory experiments is presented in which students are challenged to use the 12 principles of green chemistry to review and modify synthesis protocols to improve greenness. A global metric, green star, is used in parallel with green chemistry mass metrics to evaluate the improvement in greenness.…

  12. Facile, low temperature synthesis of SnO{sub 2}/reduced graphene oxide nanocomposite as anode material for lithium-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Chau-Chung; Brahma, Sanjaya; Weng, Shao-Chieh [Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70001, Taiwan, ROC (China); Chang, Chia-Chin [Department of Greenergy, National University of Tainan, Tainan 70005, Taiwan, ROC (China); Huang, Jow-Lay, E-mail: jlh888@mail.ncku.edu.tw [Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70001, Taiwan, ROC (China); Department of Chemical and Materials Engineering, National University of Kaohsiung, Kaohsiung 81148, Taiwan, ROC (China); Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 70101, Taiwan, ROC (China)

    2017-08-15

    Highlights: • Facile, one-pot, low temperature synthesis of SnO{sub 2}-RGO composite. • In-situ reduction of graphene oxide and growth of SnO{sub 2} nanoparticle. • Concentration of reductant during synthesis affects the properties significantly. • SnO{sub 2}-RGO composite shows good rate capability and stable capacitance. • Synthesis method is energy efficient and scalable for other metal oxides. - Abstract: We demonstrate a facile, single step, low temperature and energy efficient strategy for the synthesis of SnO{sub 2}-reduced graphene oxide (RGO) nanocomposite where the crystallization of SnO{sub 2} nanoparticles and the reduction of graphene oxide takes place simultaneously by an in situ chemical reduction process. The electrochemical property of the SnO{sub 2}-RGO composite prepared by using low concentrations of reducing agent shows better Li storage performance, good rate capability (378 mAh g{sup −1} at 3200 mA g{sup −1}) and stable capacitance (522 mAh g{sup −1} after 50 cycles). Increasing the reductant concentration lead to crystallization of high concentration of SnO{sub 2} nanoparticle aggregation and degrade the Li ion storage property.

  13. VHDL for logic synthesis

    CERN Document Server

    Rushton, Andrew

    2011-01-01

    Many engineers encountering VHDL (very high speed integrated circuits hardware description language) for the first time can feel overwhelmed by it. This book bridges the gap between the VHDL language and the hardware that results from logic synthesis with clear organisation, progressing from the basics of combinational logic, types, and operators; through special structures such as tristate buses, register banks and memories, to advanced themes such as developing your own packages, writing test benches and using the full range of synthesis types. This third edition has been substantially rewritten to include the new VHDL-2008 features that enable synthesis of fixed-point and floating-point hardware. Extensively updated throughout to reflect modern logic synthesis usage, it also contains a complete case study to demonstrate the updated features. Features to this edition include: * a common VHDL subset which will work across a range of different synthesis systems, targeting a very wide range of technologies...

  14. Acid- and Au(i)-mediated synthesis of hexathymidine-DNA-heterocycle chimeras, an efficient entry to DNA-encoded libraries inspired by drug structures† †Electronic supplementary information (ESI) available: Experimental procedures, compound characterization data, analysis of ligation reactions, and analysis of the tiDEL. See DOI: 10.1039/c7sc00455a Click here for additional data file.

    Science.gov (United States)

    Škopić, Mateja Klika; Salamon, Hazem; Bugain, Olivia; Jung, Kathrin; Gohla, Anne; Doetsch, Lara J.; dos Santos, Denise; Bhat, Avinash; Wagner, Bernd

    2017-01-01

    Libraries of DNA-tagged compounds are a validated screening technology for drug discovery. They are synthesized through combinatorial iterations of alternated coding and preparative synthesis steps. Thus, large chemical space can be accessed for target-based screening. However, the need to preserve the functionality of the DNA tag severely restricts the choice of chemical methods for library synthesis. Acidic organocatalysts, transition metals, and oxidants furnish diverse drug-like structures from simple starting materials, but cause loss of genetic information by depurination. A hexathymidine oligonucleotide, called “hexT” allows the chemist utilizing these classes of catalysts to access a potentially broad variety of structures in the initial step of library synthesis. We exploited its catalyst tolerance to efficiently synthesize diverse substituted β-carbolines, pyrazolines, and pyrazoles from readily available starting materials as hexT conjugates by acid- and Au(i)-catalysis, respectively. The hexT conjugates were ligated to coding DNA sequences yielding encoded screening libraries inspired by drug structures. PMID:28507705

  15. Transgenesis procedures in Xenopus

    Science.gov (United States)

    Chesneau, Albert; Sachs, Laurent M.; Chai, Norin; Chen, Yonglong; Pasquier, Louis Du; Loeber, Jana; Pollet, Nicolas; Reilly, Michael; Weeks, Daniel L.; Bronchain, Odile J.

    2010-01-01

    Stable integration of foreign DNA into the frog genome has been the purpose of several studies aimed at generating transgenic animals or producing mutations of endogenous genes. Inserting DNA into a host genome can be achieved in a number of ways. In Xenopus, different strategies have been developed which exhibit specific molecular and technical features. Although several of these technologies were also applied in various model organizms, the attributes of each method have rarely been experimentally compared. Investigators are thus confronted with a difficult choice to discriminate which method would be best suited for their applications. To gain better understanding, a transgenesis workshop was organized by the X-omics consortium. Three procedures were assessed side-by-side, and the results obtained are used to illustrate this review. In addition, a number of reagents and tools have been set up for the purpose of gene expression and functional gene analyses. This not only improves the status of Xenopus as a powerful model for developmental studies, but also renders it suitable for sophisticated genetic approaches. Twenty years after the first reported transgenic Xenopus, we review the state of the art of transgenic research, focusing on the new perspectives in performing genetic studies in this species. PMID:18699776

  16. Automated emergency operating procedures

    International Nuclear Information System (INIS)

    Perez-Ramirez, G.; Nelson, P.F.

    1990-01-01

    This paper describes the development of a training tool for the symptom oriented emergency operating procedures used at the Laguna Verde Nuclear Power Plant. EOPs and operator training are intended to assist the operator for managing accident situations. A prototype expert system based on the EOPs has been developed for operator training. The demonstration expert system was developed using a commercial shell. The knowledge base consists of two parts. The specific operator actions to be executed for 5 selected accident sequences and the EOPs steps for the reactor pressure vessel control of the water level, pressure, and power. The knowledge is expressed in the form of IF-THEN production rules. A typical training session will display a set of conditions and will prompt the trainee to indicate the appropriate step to perform. This mode will guide the trainee through selected accident sequences. A second mode of the expert system will prompt the trainee for the current plant conditions and the expert system will respond with the EOPs which are required to be performed under these conditions. This allows the trainee to study What if situations

  17. Computer software review procedures

    International Nuclear Information System (INIS)

    Mauck, J.L.

    1993-01-01

    This article reviews the procedures which are used to review software written for computer based instrumentation and control functions in nuclear facilities. The utilization of computer based control systems is becoming much more prevalent in such installations, in addition to being retrofit into existing systems. Currently, the Nuclear Regulatory System uses Regulatory Guide 1.152, open-quotes Criteria for Programmable Digital Computer System Software in Safety-Related Systems of Nuclear Power Plantsclose quotes and ANSI/IEEE-ANS-7-4.3.2-1982, open-quotes Application Criteria for Programmable Digital Computer Systems in Safety Systems of Nuclear Power Generating Stationsclose quotes for guidance when performing reviews of digital systems. There is great concern about the process of verification and validation of these codes, so when inspections are done of such systems, inspectors examine very closely the processes which were followed in developing the codes, the errors which were detected, how they were found, and the analysis which went into tracing down the causes behind the errors to insure such errors were not propagated again in the future

  18. NASA trend analysis procedures

    Science.gov (United States)

    1993-01-01

    This publication is primarily intended for use by NASA personnel engaged in managing or implementing trend analysis programs. 'Trend analysis' refers to the observation of current activity in the context of the past in order to infer the expected level of future activity. NASA trend analysis was divided into 5 categories: problem, performance, supportability, programmatic, and reliability. Problem trend analysis uncovers multiple occurrences of historical hardware or software problems or failures in order to focus future corrective action. Performance trend analysis observes changing levels of real-time or historical flight vehicle performance parameters such as temperatures, pressures, and flow rates as compared to specification or 'safe' limits. Supportability trend analysis assesses the adequacy of the spaceflight logistics system; example indicators are repair-turn-around time and parts stockage levels. Programmatic trend analysis uses quantitative indicators to evaluate the 'health' of NASA programs of all types. Finally, reliability trend analysis attempts to evaluate the growth of system reliability based on a decreasing rate of occurrence of hardware problems over time. Procedures for conducting all five types of trend analysis are provided in this publication, prepared through the joint efforts of the NASA Trend Analysis Working Group.

  19. Biosurfactants as green stabilizers for the biological synthesis of nanoparticles.

    Science.gov (United States)

    Kiran, G Seghal; Selvin, Joseph; Manilal, Aseer; Sujith, S

    2011-12-01

    Taking into consideration the needs of greener bioprocesses and novel enhancers for synthesis using microbial processes, biosurfactants, and/or biosurfactant producing microbes are emerging as an alternate source for the rapid synthesis of nanoparticles. A microemulsion technique using an oil-water-surfactant mixture was shown to be a promising approach for nanoparticle synthesis. Biosurfactants are natural surfactants derived from microbial origin composed mostly of sugar and fatty acid moieties, they have higher biodegradability, lower toxicity, and excellent biological activities. The biosurfactant mediated process and microbial synthesis of nanoparticles are now emerging as clean, nontoxic, and environmentally acceptable "green chemistry" procedures. The biosurfactant-mediated synthesis is superior to the methods of bacterial- or fungal-mediated nanoparticle synthesis, since biosurfactants reduce the formation of aggregates due to the electrostatic forces of attraction and facilitate a uniform morphology of the nanoparticles. In this review, we highlight the biosurfactant mediated synthesis of nanoparticles with relevant details including a greener bioprocess, sources of biosurfactants, and biological synthesized nanoparticles based on the available literature and laboratory findings.

  20. Rapid synthesis of macrocycles from diol precursors

    DEFF Research Database (Denmark)

    Wingstrand, Magnus; Madsen, Charlotte Marie; Clausen, Mads Hartvig

    2009-01-01

    A method for the formation of synthetic macrocycles with different ring sizes from diols is presented. Reacting a simple diol precursor with electrophilic reagents leads to a cyclic carbonate, sulfite or phosphate in a single step in 25-60% yield. Converting the cyclization precursor to a bis-ele...

  1. AGREED-UPON PROCEDURES, PROCEDURES FOR AUDITING EUROPEAN GRANTS

    Directory of Open Access Journals (Sweden)

    Daniel Petru VARTEIU

    2016-12-01

    The audit of EU-funded projects is an audit based on agreed-upon procedures, which are established by the Managing Authority or the Intermediate Body. Agreed-upon procedures can be defined as engagements made in accordance with ISRS 4400, applicable to agreed-upon procedures, where the auditor undertakes to carry out the agreed-upon procedures and issue a report on factual findings. The report provided by the auditor does not express any assurance. It allows users to form their own opinions about the conformity of the expenses with the project budget as well as the eligibility of the expenses.

  2. MUSE optical alignment procedure

    Science.gov (United States)

    Laurent, Florence; Renault, Edgard; Loupias, Magali; Kosmalski, Johan; Anwand, Heiko; Bacon, Roland; Boudon, Didier; Caillier, Patrick; Daguisé, Eric; Dubois, Jean-Pierre; Dupuy, Christophe; Kelz, Andreas; Lizon, Jean-Louis; Nicklas, Harald; Parès, Laurent; Remillieux, Alban; Seifert, Walter; Valentin, Hervé; Xu, Wenli

    2012-09-01

    MUSE (Multi Unit Spectroscopic Explorer) is a second generation VLT integral field spectrograph (1x1arcmin² Field of View) developed for the European Southern Observatory (ESO), operating in the visible wavelength range (0.465-0.93 μm). A consortium of seven institutes is currently assembling and testing MUSE in the Integration Hall of the Observatoire de Lyon for the Preliminary Acceptance in Europe, scheduled for 2013. MUSE is composed of several subsystems which are under the responsibility of each institute. The Fore Optics derotates and anamorphoses the image at the focal plane. A Splitting and Relay Optics feed the 24 identical Integral Field Units (IFU), that are mounted within a large monolithic instrument mechanical structure. Each IFU incorporates an image slicer, a fully refractive spectrograph with VPH-grating and a detector system connected to a global vacuum and cryogenic system. During 2011, all MUSE subsystems were integrated, aligned and tested independently in each institute. After validations, the systems were shipped to the P.I. institute at Lyon and were assembled in the Integration Hall This paper describes the end-to-end optical alignment procedure of the MUSE instrument. The design strategy, mixing an optical alignment by manufacturing (plug and play approach) and few adjustments on key components, is presented. We depict the alignment method for identifying the optical axis using several references located in pupil and image planes. All tools required to perform the global alignment between each subsystem are described. The success of this alignment approach is demonstrated by the good results for the MUSE image quality. MUSE commissioning at the VLT (Very Large Telescope) is planned for 2013.

  3. Safeguards management inspection procedures

    International Nuclear Information System (INIS)

    Barth, M.J.; Dunn, D.R.

    1984-08-01

    The objective of this inspection module is to independently assess the contributions of licensee management to overall safeguards systems performance. The inspector accomplishes this objective by comparing the licensee's safeguards management to both the 10 CFR, parts 70 and 73, requirements and to generally accepted management practices. The vehicle by which this comparison is to be made consists of assessment questions and key issues which point the inspector to areas of primary concern to the NRC and which raise additional issues for the purpose of exposing management ineffectiveness. Further insight into management effectiveness is obtained through those assessment questions specifically directed toward the licensee's safeguards system performance. If the quality of the safeguards is poor, then the inspector should strongly suspect that management's role is ineffective and should attempt to determine management's influence (or lack thereof) on the underlying safeguards deficiencies. (The converse is not necessarily true, however.) The assessment questions in essence provide an opportunity for the inspector to identify, to single out, and to probe further, questionable management practices. Specific issues, circumstances, and concerns which point to questionable or inappropriate practices should be explicitly identified and referenced against the CFR and the assessment questions. The inspection report should also explain why the inspector feels certain management practices are poor, counter to the CFR, and/or point to ineffecive management. Concurrent with documenting the inspection results, the inspector should provide recommendations for alleviating observed management practices that are detrimental to effective safeguards. The recommendations could include: specific changes in the practices of the licensee, followup procedures on the part of NRC, and proposed license changes

  4. Synthesis of water-soluble mono- and ditopic imidazoliums for carbene ligands

    Energy Technology Data Exchange (ETDEWEB)

    Anstey, Mitchell [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Chemistry Division; Murtagh, Dustin [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Chemistry Division; Cordaro, Joseph Gabriel [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Chemistry Division; Stavila, Vitalie [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Chemistry Division; Feng, Patrick L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Chemistry Division; Mengesha, Wondwosen [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Chemistry Division

    2015-09-01

    Synthesis of ditopic imidazoliums was achieved using a modular step-wise procedure. The procedure itself is amenable to a wide array of functional groups that can be incorporated into the imidazolium architecture. The resulting compounds range from ditopic zwitterions to highly-soluble dicationic aromatics

  5. Rapid single-step upconversion-linked immunosorbent assay for diclofenac

    Czech Academy of Sciences Publication Activity Database

    Hlaváček, Antonín; Peterek, M.; Farka, Z.; Mickert, M. J.; Prechtl, L.; Knopp, D.; Gorris, H H.

    2017-01-01

    Roč. 184, č. 10 (2017), s. 4159-4165 ISSN 0026-3672 R&D Projects: GA ČR(CZ) GBP206/12/G014; GA MŠk(CZ) LM2015043 Institutional support: RVO:68081715 Keywords : bioconjugation * electrophoretic purification * immunoassay * luminescence Subject RIV: CB - Analytical Chemistry, Separation OBOR OECD: Analytical chemistry Impact factor: 4.580, year: 2016

  6. Single step preparation of NdFeB alloy by magnesiothermic reduction-diffusion process

    International Nuclear Information System (INIS)

    Singha, Vinay Kant; Surendranathana, A.O.; John Berchmans, L.

    2014-01-01

    Magnesiothermic reduction is a new approach to produce the NdFeB alloy on a commercial scale. Similar studies were conducted for the preparation of LaNi 5 and SmCo 5 using magnesium as the reductant. In the present investigation NdFeB Hard magnetic bulk materials were synthesized by metallothermic 'Reduction – Diffusion (R-D) Process' using Magnesium as a reductant. For this process oxide precursors of Nd, Fe and B were blended with flux (LiCl/CaCl 2 ) and Mg chips were sandwiched in alternate layers. Thermal analysis (TGA/DTA) was carried out to find the dissociation and decomposition temperature of the reactants. The phase analysis, structure, and elemental composition were assessed by X-ray diffraction (XRD) and electron dispersive spectrometry (EDS). The infrared (IR) spectra were recorded by Fourier transform infrared spectrometer (FTIR). The morphological features and particle size was assessed by scanning electron microscope (SEM). The magnetic behaviour of the alloy was assessed using electron paramagnetic resonance (EPR) and vibratory sample magnetometer (VSM). From these studies it has been concluded that the NdFeB magnetic particles can be prepared using magnesium as the reductant. The process is faster and consumes very less amount of energy for the completion as compared to conventional calciothermic reduction process. Traces of MgO were detected in the alloy which increases the perpendicular anisotropy, thus increasing the coercivity of the material

  7. Preparation of orthorhombic Ba2YCu3O7 powder by single-step calcining

    International Nuclear Information System (INIS)

    Spann, J.R.; Kahn, M.; Lloyd, I.K.

    1990-01-01

    A single calcination step, solid-state process that provides orthohombic Ba 2 YCu 3 O 7 powder is described. BaCO 3 , Y 2 O 3 , and CuO are used as precursor materials. The only phase identifiable by x-ray diffraction is the orthorhombic Ba 2 YCu 3 O 7 . The use of a vacuum during the initial stages of the calcining process promotes complete decomposition of the carbonate, and no residual carbonate is observed. An oxygen atmosphere during the later stages of calcining ensures proper oxidation to Ba 2 YCu 3 O 7 . The use of a similar combination vacuum-oxygen calcining schedule should also be beneficial in the preparation of chemically derived powders

  8. Bio-Docklets: virtualization containers for single-step execution of NGS pipelines.

    Science.gov (United States)

    Kim, Baekdoo; Ali, Thahmina; Lijeron, Carlos; Afgan, Enis; Krampis, Konstantinos

    2017-08-01

    Processing of next-generation sequencing (NGS) data requires significant technical skills, involving installation, configuration, and execution of bioinformatics data pipelines, in addition to specialized postanalysis visualization and data mining software. In order to address some of these challenges, developers have leveraged virtualization containers toward seamless deployment of preconfigured bioinformatics software and pipelines on any computational platform. We present an approach for abstracting the complex data operations of multistep, bioinformatics pipelines for NGS data analysis. As examples, we have deployed 2 pipelines for RNA sequencing and chromatin immunoprecipitation sequencing, preconfigured within Docker virtualization containers we call Bio-Docklets. Each Bio-Docklet exposes a single data input and output endpoint and from a user perspective, running the pipelines as simply as running a single bioinformatics tool. This is achieved using a "meta-script" that automatically starts the Bio-Docklets and controls the pipeline execution through the BioBlend software library and the Galaxy Application Programming Interface. The pipeline output is postprocessed by integration with the Visual Omics Explorer framework, providing interactive data visualizations that users can access through a web browser. Our goal is to enable easy access to NGS data analysis pipelines for nonbioinformatics experts on any computing environment, whether a laboratory workstation, university computer cluster, or a cloud service provider. Beyond end users, the Bio-Docklets also enables developers to programmatically deploy and run a large number of pipeline instances for concurrent analysis of multiple datasets. © The Authors 2017. Published by Oxford University Press.

  9. Inorganic metallodielectric materials fabricated using two single-step methods based on the Tollen's process.

    Science.gov (United States)

    Peterson, Molly S M; Bouwman, Jason; Chen, Aiqing; Deutsch, Miriam

    2007-02-01

    Two methods for preparing polycrystalline silver shells on colloidal silica spheres are reported. These do not include the use of organic ligands or metal seeding steps and are based on the Tollen's process for silvering glass. Reaction parameters such as temperature and reactant concentrations are adjusted to slow the reaction kinetics, which we find leads to preferential silver growth on the spheres. The resulting shells are polycrystalline and granular, showing highly uniform sphere coverage. Surface morphologies range from sparsely interconnected grains for shells approximately 20 nm thick, to complete (yet porous) shells of interconnected silver clusters which are up to approximately 140 nm in thickness. The extinction spectra of the core-shell materials are markedly different from those of smooth continuous shells, showing clear evidence that the granular shell geometry influences the plasmon resonance of the composite system. Spheres coated with shells 20-40 nm thick are also suitable for colloidal crystallization. Monolayers of self-assembled spheres with long-range ordering are demonstrated.

  10. Production of alpha-amylase from Aspergillus oryzae for several industrial applications in a single step.

    Science.gov (United States)

    Porfirif, María C; Milatich, Esteban J; Farruggia, Beatriz M; Romanini, Diana

    2016-06-01

    A one-step method as a strategy of alpha-amylase concentration and purification was developed in this work. This methodology requires the use of a very low concentration of biodegradable polyelectrolyte (Eudragit(®) E-PO) and represents a low cost, fast, easy to scale up and non-polluting technology. Besides, this methodology allows recycling the polymer after precipitation. The formation of reversible soluble/insoluble complexes between alpha-amylase and the polymer Eudragit(®) E-PO was studied, and their precipitation in selected conditions was applied with bioseparation purposes. Turbidimetric assays allowed to determine the pH range where the complexes are insoluble (4.50-7.00); pH 5.50 yielded the highest turbidity of the system. The presence of NaCl (0.05M) in the medium totally dissociates the protein-polymer complexes. When the adequate concentration of polymer was added under these conditions to a liquid culture of Aspergillus oryzae, purification factors of alpha-amylase up to 7.43 and recoveries of 88% were obtained in a simple step without previous clarification. These results demonstrate that this methodology is suitable for the concentration and production of alpha-amylase from this source and could be applied at the beginning of downstream processing. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. "Silicon millefeuille": From a silicon wafer to multiple thin crystalline films in a single step

    Science.gov (United States)

    Hernández, David; Trifonov, Trifon; Garín, Moisés; Alcubilla, Ramon

    2013-04-01

    During the last years, many techniques have been developed to obtain thin crystalline films from commercial silicon ingots. Large market applications are foreseen in the photovoltaic field, where important cost reductions are predicted, and also in advanced microelectronics technologies as three-dimensional integration, system on foil, or silicon interposers [Dross et al., Prog. Photovoltaics 20, 770-784 (2012); R. Brendel, Thin Film Crystalline Silicon Solar Cells (Wiley-VCH, Weinheim, Germany 2003); J. N. Burghartz, Ultra-Thin Chip Technology and Applications (Springer Science + Business Media, NY, USA, 2010)]. Existing methods produce "one at a time" silicon layers, once one thin film is obtained, the complete process is repeated to obtain the next layer. Here, we describe a technology that, from a single crystalline silicon wafer, produces a large number of crystalline films with controlled thickness in a single technological step.

  12. A novel single-step, multipoint calibration method for instrumented Lab-on-Chip systems

    DEFF Research Database (Denmark)

    Pfreundt, Andrea; Patou, François; Zulfiqar, Azeem

    2014-01-01

    Despite recent and substantial advances in biosensing, information and communication, and Lab-on-Chip (LoC) technologies, the success of Point-of-Care (PoC) diagnostics and monitoring systems is still challenged by stringent requirements for robustness, cost-effectiveness, and system integration....... The pitfalls of PoC system adoption can be addressed early in the system design phase. They require a multidisciplinary design approach supported by systems engineering tools and methods. Considering this, we here present both a model and an implementation of a simple and rapid calibration scheme...... for instrument-based PoC blood biomarker analysis systems. Motivated by the complexity of associating high-accuracy biosensing using silicon nanowire field effect transistors with ease of use for the PoC system user, we propose a novel one-step, multipoint calibration method for LoC-based systems. Our approach...

  13. Engineering Escherichia coli for Soluble Expression and Single Step Purification of Active Human Lysozyme

    Science.gov (United States)

    Lamppa, John W.; Tanyos, Sam A.; Griswold, Karl E.

    2012-01-01

    Genetically engineered variants of human lysozyme represent promising leads in the battle against drug-resistant bacterial pathogens, but early stage development and testing of novel lysozyme variants is constrained by the lack of a robust, scalable and facile expression system. While wild type human lysozyme is reportedly produced at 50 – 80 kg per hectare of land in recombinant rice, this plant-based system is not readily scaled down to bench top production, and it is therefore not suitable for development and characterization of novel lysozyme variants. Here, we describe a novel and efficient expression system capable of producing folded, soluble and functional human lysozyme in E. coli cells. To achieve this goal, we simultaneously co-express multiple protein folding chaperones as well as harness the lysozyme inhibitory protein, Ivy. Our strategy exploits E. coli’s ease of culture, short doubling time, and facile genetics to yield upwards of 30 mg/L of soluble lysozyme in a bioreactor system, a 3000-fold improvement over prior efforts in E. coli. Additionally, molecular interactions between lysozyme and a his-tagged Ivy allows for one-step purification by IMAC chromatography, yielding as much as 21 mg/L of purified enzyme. We anticipate that our expression and purification platform will facilitate further development of engineered lysozymes having utility in disease treatment and other practical applications. PMID:23220215

  14. Pyrolysis kinetic evaluation by single-step for waste wood from reforestation.

    Science.gov (United States)

    da Silva, Jean Constantino Gomes; Alves, José Luiz Francisco; Galdino, Wendell Venicio de Araujo; Andersen, Silvia Layara Floriani; de Sena, Rennio Felix

    2018-02-01

    The objective of this study was to evaluate the kinetic parameters of pyrolysis of waste wood from reforestation: Eucalyptus benthamii (EB), Eucalyptus dunnii (ED) and Pinus elliottii (PN). The kinetic study was performed using the Friedman, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), Starink, and Vyazovkin methods from the experimental data at four heating rates (5, 10, 20 and 30 °C min -1 ). The Friedman method presented higher activation energy values (E a ) when compared to the other methods (E a EB  = 142.98 kJ mol -1 , E a ED  = 147.71 kJ mol -1 , E a PN  = 155.46 kJ mol -1 ). The KAS, Starink and Vyazovkin methods resulted in approximate values of activation energy (E a EB  = 132.83-133.31 kJ mol -1 , E a ED  = 137.51-137.98 kJ mol -1 , E a PN  = 145.24-145.70 kJ mol -1 ) due to the approximation equations with lowest relative errors. The simulation of curves using the kinetic parameters obtained with the Vyazovkin method showed that the decomposition process of EB and ED occurs as a multi-step process resulting in an unsatisfactory result for the simulation. On the other hand, for PN a satisfactory fit to the experimental data was obtained, which demonstrates its suitability for application to the modeling of thermochemical systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Three-dimensional photonic crystals created by single-step multi-directional plasma etching.

    Science.gov (United States)

    Suzuki, Katsuyoshi; Kitano, Keisuke; Ishizaki, Kenji; Noda, Susumu

    2014-07-14

    We fabricate 3D photonic nanostructures by simultaneous multi-directional plasma etching. This simple and flexible method is enabled by controlling the ion-sheath in reactive-ion-etching equipment. We realize 3D photonic crystals on single-crystalline silicon wafers and show high reflectance (>95%) and low transmittance (photonic bandgap. Moreover, our method simply demonstrates Si-based 3D photonic crystals that show the photonic bandgap effect in a shorter wavelength range around 0.6 μm, where further fine structures are required.

  16. Rapid single-step upconversion-linked immunosorbent assay for diclofenac

    Czech Academy of Sciences Publication Activity Database

    Hlaváček, Antonín; Peterek, M.; Farka, Z.; Mickert, M. J.; Prechtl, L.; Knopp, D.; Gorris, H H.

    2017-01-01

    Roč. 184, č. 10 (2017), s. 4159-4165 ISSN 0026-3672 R&D Projects: GA ČR(CZ) GBP206/12/G014 Institutional support: RVO:68081715 Keywords : bioconjugation * electrophoretic purification * immunoassay * luminescence Subject RIV: CB - Analytical Chemistry, Separation OBOR OECD: Analytical chemistry Impact factor: 4.580, year: 2016

  17. Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production.

    Directory of Open Access Journals (Sweden)

    Ashley R Johnson

    Full Text Available Microneedles, arrays of micron-sized needles that painlessly puncture the skin, enable transdermal delivery of medications that are difficult to deliver using more traditional routes. Many important design parameters, such as microneedle size, shape, spacing, and composition, are known to influence efficacy, but are notoriously difficult to alter due to the complex nature of microfabrication techniques. Herein, we utilize a novel additive manufacturing ("3D printing" technique called Continuous Liquid Interface Production (CLIP to rapidly prototype sharp microneedles with tuneable geometries (size, shape, aspect ratio, spacing. This technology allows for mold-independent, one-step manufacturing of microneedle arrays of virtually any design in less than 10 minutes per patch. Square pyramidal CLIP microneedles composed of trimethylolpropane triacrylate, polyacrylic acid and photopolymerizable derivatives of polyethylene glycol and polycaprolactone were fabricated to demonstrate the range of materials that can be utilized within this platform for encapsulating and controlling the release of therapeutics. These CLIP microneedles effectively pierced murine skin ex vivo and released the fluorescent drug surrogate rhodamine.

  18. Single-Step Nanoporation of Water-Immersed Polystyrene Film by Gaseous Nanobubbles

    Czech Academy of Sciences Publication Activity Database

    Tarábková, Hana; Janda, Pavel

    2016-01-01

    Roč. 32, č. 43 (2016), s. 11221-11229 ISSN 0743-7463 R&D Projects: GA ČR(CZ) GAP208/12/2429 Institutional support: RVO:61388955 Keywords : Atomic force microscopy * Biocompatibility * Polystyrenes Subject RIV: CG - Electrochemistry Impact factor: 3.833, year: 2016

  19. Single-step method of RNA isolation by acid guanidinium thiocyanate-phenol-chloroform extraction.

    Science.gov (United States)

    Chomczynski, P; Sacchi, N

    1987-04-01

    A new method of total RNA isolation by a single extraction with an acid guanidinium thiocyanate-phenol-chloroform mixture is described. The method provides a pure preparation of undegraded RNA in high yield and can be completed within 4 h. It is particularly useful for processing large numbers of samples and for isolation of RNA from minute quantities of cells or tissue samples.

  20. Isolation of RNA from tumor samples: single-step guanidinium acid-phenol method.

    Science.gov (United States)

    Robertson, Naomi; Leek, Russell

    2006-01-01

    The guanidinium acid-phenol method of RNA extraction is relatively fast (4 h) and is useful for the processing of large numbers of samples, without the need for ultracentrifugation. This protocol produces total RNA that includes ribosomal, transfer, and messenger RNA. This high-quality RNA is suitable for Northern blot analysis, dot-blot hybridization, poly (A) RNA selection, in vitro translation, cDNA library construction, reverse transcriptase-polymerase chain reaction, ribonuclease protection assay, and primer extension experiments.

  1. Single-Step Multiplex PCR Assay for Characterization of New World Leishmania Complexes

    Science.gov (United States)

    Harris, Eva; Kropp, Gerald; Belli, Alejandro; Rodriguez, Betzabé; Agabian, Nina

    1998-01-01

    We have developed a PCR assay for one-step differentiation of the three complexes of New World Leishmania (Leishmania braziliensis, Leishmania mexicana, and Leishmania donovani). This multiplex assay is targeted to the spliced leader RNA (mini-exon) gene repeats of these organisms and can detect all three complexes simultaneously, generating differently sized products for each complex. The assay is specific to the Leishmania genus and does not recognize related kinetoplastid protozoa, such as Trypanosoma cruzi, Trypanosoma brucei, and Crithidia fasciculata. It correctly identified Leishmania species with a broad geographic distribution in Central and South America. The sensitivity of the PCR amplification ranged from 1 fg to 10 pg of DNA (0.01 to 100 parasites), depending on the complex detected. Crude extracts of cultured parasites, prepared simply by boiling diluted cultures, served as excellent templates for amplification. Crude preparations of clinical material were also tested. The assay detected L. braziliensis in dermal scrapings from cutaneous leishmanial lesions, Leishmania chagasi in dermal scrapings of atypical cutaneous leishmaniasis, and L. mexicana from lesion aspirates from infected hamsters. We have minimized the material requirements and maximized the simplicity, rapidity, and informative content of this assay to render it suitable for use in laboratories in countries where leishmaniasis is endemic. This assay should be useful for rapid in-country identification of Leishmania parasites, particularly where different Leishmania complexes are found in the same geographical area. PMID:9650950

  2. Single Step to Orbit; a First Step in a Cooperative Space Exploration Initiative

    Science.gov (United States)

    Lusignan, Bruce; Sivalingam, Shivan

    1999-01-01

    At the end of the Cold War, disarmament planners included a recommendation to ease reduction of the U.S. and Russian aerospace industries by creating cooperative scientific pursuits. The idea was not new, having earlier been suggested by Eisenhower and Khrushchev to reduce the pressure of the "Military Industrial Complex" by undertaking joint space exploration. The Space Exploration Initiative (SEI) proposed at the end of the Cold War by President Bush and Premier Gorbachev was another attempt to ease the disarmament process by giving the bloated war industries something better to do. The engineering talent and the space rockets could be used for peaceful pursuits, notably for going back to the Moon and then on to Mars with human exploration and settlement. At the beginning of this process in 1992 staff of the Stanford Center for International Cooperation in Space attended the International Space University in Canada, met with Russian participants and invited a Russian team to work with us on a joint Stanford-Russian Mars Exploration Study. A CIA student and Airforce and Navy students just happened to join the Stanford course the next year and all students were aware that the leader of the four Russian engineers was well versed in Russian security. But, as long as they did their homework, they were welcome to participate with other students in defining the Mars mission and the three engineers they sent were excellent. At the end of this study we were invited to give a briefing to Dr. Edward Teller at Stanford's Hoover Institution of War and Peace. We were also encouraged to hold a press conference on Capitol Hill to introduce the study to the world. At a pre-conference briefing at the Space Council, we were asked to please remind the press that President Bush had asked for a cooperative exploration proposal not a U.S. alone initiative. The Stanford-Russian study used Russia's Energia launchers, priced at $300 Million each. The mission totaled out to $71.5 Billion, to send a six-person crew to establish a Mars base and return. It was an on going international venture with plans for new crews, base expansion, and extended exploration at every two year opportunity. The $71.5 Billion international approach contrasted with NASA's own 90-day U.S. - alone study that proposed a package topping $500 Billion by some admissions. NASA's approach was also challenged by an internal D.O.E. proposal at much lower cost, described to the Mars Society last year by Lowell Wood and, of course, by Bob Zubrin's "Mars Direct" proposal.

  3. Method to make a single-step etch mask for 3D monolithic nanostructures

    NARCIS (Netherlands)

    Grishina, Diana; Harteveld, Cornelis A.M.; Woldering, L.A.; Vos, Willem L.

    2015-01-01

    Current nanostructure fabrication by etching is usually limited to planar structures as they are defined by a planar mask. The realization of three-dimensional (3D) nanostructures by etching requires technologies beyond planar masks. We present a method for fabricating a 3D mask that allows one to

  4. Single step natural poly(tannic acid) particle preparation as multitalented biomaterial.

    Science.gov (United States)

    Sahiner, Nurettin; Sagbas, Selin; Aktas, Nahit

    2015-04-01

    In this study, we report the preparation of poly(tannic acid) (p(TA)) particles by crosslinking with glycerol diglycidyl ether (GDE) and trimethylolpropane triglycidyl ether (TMPGDE). The p(TA) particles are negatively charged as obtained by the zeta potential measurements, -27mV. P(TA) particles are found to be an effective antioxidant material as 170mgL(-1) of p(TA) particle demonstrated the antioxidant equivalency of 82.5±7.2mgL(-1) of gallic acid (GA), used as standard in Folin-Ciocalteau (FC) method. Additionally, TA and p(TA) particles have a strong antimicrobial effect against Escherichia coli ATCC 8739, Staphylococcus aureus ATCC 6538, and Bacillus subtilis ATCC 6633. Furthermore, p(TA) particles were used as drug delivery materials by using model drugs such as TA itself, and GA in the release studies in PBS at pH7.4 at 37.5°C, and found that p(TA) particles can release 80.8 and 87.4% of the loaded TA and GA, respectively. Interestingly, p(TA) maintained its fluorescent property upon crosslinking of TA units. It is further demonstrated that p(TA) particles are as effective as cisplatin (a cancer drug) against A549 cancerous cells that both showed about 36 and 34% cell viability, respectively whereas linear TA showed 66% cell viability at 37.5μgmL(-1) concentration. Above this concentration p(TA) and cisplatin showed almost the same toxicity against A549 cancerous cells. Additionally, p(TA) particles are found to be much more biocompatible against L929 Fibroblast cells, about 84% cell viability in comparison to linear TA with about 53% at 75μgmL(-1) concentration. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Single step reconstitution of multifunctional high-density lipoprotein-derived nanomaterials using microfluidics

    NARCIS (Netherlands)

    Kim, Yongtae; Fay, Francois; Cormode, David P.; Sanchez-Gaytan, Brenda L.; Tang, Jun; Hennessy, Elizabeth J.; Ma, Mingming; Moore, Kathryn; Farokhzad, Omid C.; Fisher, Edward Allen; Mulder, Willem J. M.; Langer, Robert; Fayad, Zahi A.

    2013-01-01

    High-density lipoprotein (HDL) is a natural nanoparticle that transports peripheral cholesterol to the liver. Reconstituted high-density lipoprotein (rHDL) exhibits antiatherothrombotic properties and is being considered as a natural treatment for cardiovascular diseases. Furthermore, HDL

  6. Single-centre comparison of a novel single-step balloon inflation ...

    African Journals Online (AJOL)

    Objective. A new second-generation balloon dilatation device for percutaneous nephrolithotomy (PCNL) has been launched, promising to challenge the traditional Amplatz serial dilators (ASDs). This device allows for the polyurethane sheath to be deployed on balloon inflation. Our primary objective in this pilot study was to ...

  7. Autogenerative high pressure digestion: anaerobic digestion and biogas upgrading in a single step reactor system

    NARCIS (Netherlands)

    Lindeboom, R.E.F.; Fermoso, F.G.; Weijma, J.; Zagt, K.; Lier, van J.B.

    2011-01-01

    Conventional anaerobic digestion is a widely applied technology to produce biogas from organic wastes and residues. The biogas calorific value depends on the CH4 content which generally ranges between 55 and 65%. Biogas upgrading to so-called ‘green gas’, with natural gas quality, generally proceeds

  8. Single-Step Purification and Characterization of A Recombinant Serine Proteinase Inhibitor from Transgenic Plants.

    Science.gov (United States)

    Jha, Shweta; Agarwal, Saurabh; Sanyal, Indraneel; Amla, D V

    2016-05-01

    Expression of recombinant therapeutic proteins in transgenic plants has a tremendous impact on safe and economical production of biomolecules for biopharmaceutical industry. The major limitation in their production is downstream processing of recombinant protein to obtain higher yield and purity of the final product. In this study, a simple and rapid process has been developed for purification of therapeutic recombinant α1-proteinase inhibitor (rα1-PI) from transgenic tomato plants, which is an abundant serine protease inhibitor in human serum and chiefly inhibits the activity of neutrophil elastase in lungs. We have expressed rα1-PI with modified synthetic gene in transgenic tomato plants at a very high level (≃3.2 % of total soluble protein). The heterologous protein was extracted with (NH4)2SO4 precipitation, followed by chromatographic separation on different matrices. However, only immunoaffinity chromatography resulted into homogenous preparation of rα1-PI with 54 % recovery. The plant-purified rα1-PI showed molecular mass and structural conformation comparable to native serum α1-PI, as shown by mass spectrometry and optical spectroscopy. The results of elastase inhibition assay revealed biological activity of the purified rα1-PI protein. This work demonstrates a simple and efficient one-step purification of rα1-PI from transgenic plants, which is an essential prerequisite for further therapeutic development.

  9. Engineering Escherichia coli for soluble expression and single step purification of active human lysozyme.

    Science.gov (United States)

    Lamppa, John W; Tanyos, Sam A; Griswold, Karl E

    2013-03-10

    Genetically engineered variants of human lysozyme represent promising leads in the battle against drug-resistant bacterial pathogens, but early stage development and testing of novel lysozyme variants is constrained by the lack of a robust, scalable and facile expression system. While wild type human lysozyme is reportedly produced at 50–80 kg per hectare of land in recombinant rice, this plant-based system is not readily scaled down to bench top production, and it is therefore not suitable for development and characterization of novel lysozyme variants. Here, we describe a novel and efficient expression system capable of producing folded, soluble and functional human lysozyme in Escherichia coli cells. To achieve this goal, we simultaneously co-express multiple protein folding chaperones as well as harness the lysozyme inhibitory protein, Ivy. Our strategy exploits E. coli's ease of culture, short doubling time, and facile genetics to yield upwards of 30 mg/l of soluble lysozyme in a bioreactor system, a 3000-fold improvement over prior efforts in E. coli. Additionally, molecular interactions between lysozyme and a his-tagged Ivy allows for one-step purification by IMAC, yielding as much as 21 mg/l of purified enzyme. We anticipate that our expression and purification platform will facilitate further development of engineered lysozymes having utility in disease treatment and other practical applications. Copyright © 2012 Elsevier B.V. All rights reserved.

  10. Single-Step Antimicrobial And Moisture Management Finishing Of Pc Fabric Using Zno Nanoparticles

    Directory of Open Access Journals (Sweden)

    Ashraf Munir

    2017-09-01

    Full Text Available Functionalization of textile fabrics with metal oxide nanoparticles can be used to add antibacterial and moisture management properties to them. Current work focuses on the development of these properties on polyester/cotton woven fabrics by treating them with zinc oxide nanoparticles for workwear and sportswear applications. Zinc oxide nanoparticles, prepared by sol-gel method, were applied on fabric samples, which were then tested for antibacterial and moisture management properties using standard test methods AATCC 147 with Staphylococcus aureus and AATCC 195, respectively. It was found that application of ZnO nanoparticles improved both these properties with smaller particle imparting larger effects on both of them.

  11. Single-step isolation of extracellular vesicles by size-exclusion chromatography

    NARCIS (Netherlands)

    Böing, Anita N.; van der Pol, Edwin; Grootemaat, Anita E.; Coumans, Frank A. W.; Sturk, Auguste; Nieuwland, Rienk

    2014-01-01

    Isolation of extracellular vesicles from plasma is a challenge due to the presence of proteins and lipoproteins. Isolation of vesicles using differential centrifugation or density-gradient ultracentrifugation results in co-isolation of contaminants such as protein aggregates and incomplete

  12. Single-step emulation of nonlinear fiber-optic link with gaussian mixture model

    DEFF Research Database (Denmark)

    Borkowski, Robert; Doberstein, Andy; Haisch, Hansjörg

    2015-01-01

    We use a fast and low-complexity statistical signal processing method to emulate nonlinear noise in fiber links. The proposed emulation technique stands in good agreement with the numerical NLSE simulation for 32 Gbaud DP-16QAM nonlinear transmission.......We use a fast and low-complexity statistical signal processing method to emulate nonlinear noise in fiber links. The proposed emulation technique stands in good agreement with the numerical NLSE simulation for 32 Gbaud DP-16QAM nonlinear transmission....

  13. Aptamer Selection Express: A Novel Method for Rapid Single-Step Selection and Sensing of Aptamers

    National Research Council Canada - National Science Library

    Fan, Maomian; Roper, Shelly; Andrews, Carrie; Allman, Amity; Bruno, John; Kiel, Jonathan

    2008-01-01

    ...). This process has been used to select aptamers against different types of targets (Bacillus anthracis spores, Bacillus thuringiensis spores, MS-2 bacteriophage, ovalbumin, and botulinum neurotoxin...

  14. Single-step rapid assembly of DNA origami nanostructures for addressable nanoscale bioreactors

    DEFF Research Database (Denmark)

    Fu, Yanming; Zeng, Dongdong; Chao, Jie

    2013-01-01

    Self-assembled DNA origami nanostructures have shown great promise for bottom-up construction of complex objects with nanoscale addressability. Here we show that DNA origami-based 1D nanoribbons and nanotubes are one-pot assembled with controllable sizes and nanoscale addressability with high speed...... (within only 10-20 min), exhibiting extraordinarily high cooperativity that is often observed in assembly of natural molecular machines in cells (e.g. ribosome). By exploiting the high specificity of DNA-based self-assembly, we can precisely anchor proteins on these DNA origami nanostructures with sub-10...

  15. Asymmetric synthesis v.4

    CERN Document Server

    Morrison, James

    1984-01-01

    Asymmetric Synthesis, Volume 4: The Chiral Carbon Pool and Chiral Sulfur, Nitrogen, Phosphorus, and Silicon Centers describes the practical methods of obtaining chiral fragments. Divided into five chapters, this book specifically examines initial chiral transmission and extension. The opening chapter describes the so-called chiral carbon pool, the readily available chiral carbon fragments used as building blocks in synthesis. This chapter also provides a list of 375 chiral building blocks, along with their commercial sources, approximate prices, and methods of synthesis. Schemes involving

  16. Behavioral Implications of Shortlisting Procedures

    OpenAIRE

    Christopher J. Tyson

    2012-01-01

    We consider two-stage "shortlisting procedures" in which the menu of alternatives is first pruned by some process or criterion and then a binary relation is maximized. Given a particular first-stage process, our main result supplies a necessary and sufficient condition for choice data to be consistent with a procedure in the designated class. This result applies to any class of procedures with a certain lattice structure, including the cases of "consideration filters," "satisficing with salie...

  17. Acquisition Policy and Procedures Program

    National Research Council Canada - National Science Library

    2001-01-01

    This Instruction establishes policies, responsibilities, and procedures for the procurement of goods and services to include supplies, equipment, publications, furniture, and information technology...

  18. Electronic Procedures for Medical Operations

    Science.gov (United States)

    2015-01-01

    Electronic procedures are replacing text-based documents for recording the steps in performing medical operations aboard the International Space Station. S&K Aerospace, LLC, has developed a content-based electronic system-based on the Extensible Markup Language (XML) standard-that separates text from formatting standards and tags items contained in procedures so they can be recognized by other electronic systems. For example, to change a standard format, electronic procedures are changed in a single batch process, and the entire body of procedures will have the new format. Procedures can be quickly searched to determine which are affected by software and hardware changes. Similarly, procedures are easily shared with other electronic systems. The system also enables real-time data capture and automatic bookmarking of current procedure steps. In Phase II of the project, S&K Aerospace developed a Procedure Representation Language (PRL) and tools to support the creation and maintenance of electronic procedures for medical operations. The goal is to develop these tools in such a way that new advances can be inserted easily, leading to an eventual medical decision support system.

  19. Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

  20. The synthesis of 2-iminochromenes using mesoporous molecular sieve MCM-41 as a heterogeneous and recyclable catalyst

    Directory of Open Access Journals (Sweden)

    Majid M. Heravi

    2010-08-01

    Full Text Available A highly efficient procedure for the synthesis of 2-iminochromenes via condensation of o-hydroxybenzaldehydes and malononitrile using a catalytic amount of mesoporous molecular sieve MCM-41 in good yields is achieved.

  1. SYNTHESIS, CHARACTERIZATION AND ANTIBACTERIAL ...

    African Journals Online (AJOL)

    Preferred Customer

    E-mail: a-ahmadi@kiau.ac.ir; ahmadikiau@yahoo.com. SYNTHESIS, CHARACTERIZATION AND ANTIBACTERIAL EVALUATION OF. SOME NOVEL DERIVATIVES OF 2-BROMOMETHYL-BENZIMIDAZOLE. Abbas Ahmadi*. Department of Medicinal Chemistry, Pharmaceutical Sciences Branch, Islamic Azad University,.

  2. 2002 Annual report: synthesis

    International Nuclear Information System (INIS)

    2003-01-01

    This synthesis of the Annual Report 2002 presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2002

  3. 2001 Annual report: synthesis

    International Nuclear Information System (INIS)

    2001-01-01

    This synthesis of the Annual Report 2001 presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2001

  4. 2000 Annual report: synthesis

    International Nuclear Information System (INIS)

    2001-01-01

    This synthesis of the Annual Report 2000 present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (NRA) of the Argentina during 2000

  5. Synthesis of Acetylhomoagmatine

    Directory of Open Access Journals (Sweden)

    Carmenza Duque

    2006-08-01

    Full Text Available Abstract: The first total synthesis of acetylhomoagmatine, a natural product isolated form the methanolic extracts from the sponge Cliona celata, is performed in four steps in a very high yield.

  6. 48 CFR 45.202 - Evaluation procedures.

    Science.gov (United States)

    2010-10-01

    ... offeror's property management plans, methods, practices, or procedures for accounting for property are... MANAGEMENT GOVERNMENT PROPERTY Solicitation and Evaluation Procedures 45.202 Evaluation procedures. (a) The...

  7. High-Yield Synthesis and Applications of Anisotropic Gold Nanoparticles

    Science.gov (United States)

    Vigderman, Leonid

    This work will describe research directed towards the synthesis of anisotropic gold nanoparticles as well as their functionalization and biological applications. The thesis will begin by describing a new technique for the high-yield synthesis of gold nanorods using hydroquinone as a reducing agent. This addresses important limitations of the traditional nanorod synthesis including low yield of gold ions conversion to metallic form and inability to produce rods with longitudinal surface plasmon peak above 850 nm. The use of hydroquinone was also found to improve the synthesis of gold nanowires via the nanorod-seed mediated procedure developed in our lab. The thesis will next present the synthesis of novel starfruitshaped nanorods, mesorods, and nanowires using a modified nanorod-seed mediated procedure. The starfruit particles displayed increased activity as surfaceenhanced Raman spectroscopy (SERS) substrates as compared to smooth structures. Next, a method for the functionalization of gold nanorods using a cationic thiol, 16-mercaptohexadecyltrimethylammonium bromide (MTAB), will be described. By using this thiol, we were able to demonstrate the complete removal of toxic surfactant from the nanorods and were also able to precisely quantify the grafting density of thiol molecules on the nanorod surface through a combination of several analytical techniques. Finally, this thesis will show that MTABfunctionalized nanorods are nontoxic and can be taken up in extremely high numbers into cancer cells. The thesis will conclude by describing the surprising uptake of larger mesorods and nanowires functionalized with MTAB into cells in high quantities.

  8. Aerosol Route Synthesis and Applications of Doped Nanostructured Materials

    Science.gov (United States)

    Sahu, Manoranjan

    Nanotechnology presents an attractive opportunity to address various challenges in air and water purification, energy, and other environment issues. Thus, the development of new nanoscale materials in low-cost scalable synthesis processes is important. Furthermore, the ability to independently manipulate the material properties as well as characterize the material at different steps along the synthesis route will aide in product optimization. In addition, to ensure safe and sustainable development of nanotechnology applications, potential impacts need to be evaluated. In this study, nanomaterial synthesis in a single-step gas phase reactor to continuously produce doped metal oxides was demonstrated. Copper-doped TiO2 nanomaterial properties (composition, size, and crystal phase) were independently controlled based on nanoparticle formation and growth mechanisms dictated by process control parameters. Copper dopant found to significantly affect TiO2 properties such as particle size, crystal phase, stability in the suspension, and absorption spectrum (shift from UV to visible light absorption). The in-situ charge distribution characterization of the synthesized nanomaterials was carried out by integrating a tandem differential mobility analyzer (TDMA) set up with the flame reactor synthesis system. Both singly- and doubly- charged nanoparticles were measured, with the charged fractions dependent on particle mobility and dopant concentration. A theoretical calculation was conducted to evaluate the relative importance of the two charging mechanisms, diffusion and thermo-ionization, in the flame. Nanoparticle exposure characterization was conducted during synthesis as a function of operating condition, product recovery and handling technique, and during maintenance of the reactors. Strategies were then indentified to minimize the exposure risk. The nanoparticle exposure potential varied depending on the operating conditions such as precursor feed rate, working

  9. Instrument Modeling and Synthesis

    Science.gov (United States)

    Horner, Andrew B.; Beauchamp, James W.

    During the 1970s and 1980s, before synthesizers based on direct sampling of musical sounds became popular, replicating musical instruments using frequency modulation (FM) or wavetable synthesis was one of the “holy grails” of music synthesis. Synthesizers such as the Yamaha DX7 allowed users great flexibility in mixing and matching sounds, but were notoriously difficult to coerce into producing sounds like those of a given instrument. Instrument design wizards practiced the mysteries of FM instrument design.

  10. Failure to Follow Written Procedures

    Science.gov (United States)

    2017-12-01

    Most tasks in aviation have a mandated written procedure to be followed specifically under the Code of Federal Regulations (CFR) Part 14, Section 43.13(a). However, the incidence of Failure to Follow Procedure (FFP) events continues to be a major iss...

  11. Proof Rules for Recursive Procedures

    NARCIS (Netherlands)

    Hesselink, Wim H.

    1993-01-01

    Four proof rules for recursive procedures in a Pascal-like language are presented. The main rule deals with total correctness and is based on results of Gries and Martin. The rule is easier to apply than Martin's. It is introduced as an extension of a specification format for Pascal-procedures, with

  12. Static Correctness of Hierarchical Procedures

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff

    1990-01-01

    A system of hierarchical, fully recursive types in a truly imperative language allows program fragments written for small types to be reused for all larger types. To exploit this property to enable type-safe hierarchical procedures, it is necessary to impose a static requirement on procedure calls...

  13. Design and optimisation of purification procedure for biodiesel washing

    Directory of Open Access Journals (Sweden)

    S.B. Glišić

    2009-09-01

    Full Text Available Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst followed by the washing procedure necessary for removing different impurities such as traces of catalyst and methanol and removal of soaps and glycerol from esters phase. The washing with hot water is still widely used in many industrial units for the biodiesel production. In this study, different procedures of biodiesel washing using hot water were investigated. The orto-phosphoric acid was suggested as the best compound for alkali catalyst (sodium hydroxide neutralization. The main goal of the performed analysis was to minimize the water usage in the washing-neutralization step during the biodiesel production. Such solution would make the process of biodiesel synthesis more economical taking into account the decrease of energy consumed for evaporation of water during the final product purification, as well as more acceptable procedure related to the impact on environment (minimal waste water release. Results of the performed simulation of the washing process supported by original experimental data suggested that neutralization after the optimized washing process of the methyl ester layer could be the best solution. The proposed washing procedure significantly decreases the amount of waste water giving at the same time the desired purity of final products (biodiesel and glycerol. The simulation of the process was performed using ASPEN plus software supported by ELCANTREL and UNIQUAC procedure of required properties calculation

  14. Convenient synthesis of protiated and specifically deuterated secondary azoalkanes

    International Nuclear Information System (INIS)

    Grizzle, P.L.; Miller, D.W.; Scheppele, S.E.

    1975-01-01

    A convenient synthesis of secondary azo compounds is reported. The method involves addition of chlorine to the azine or hydrazone in CH 2 Cl 2 followed by reduction of the dichloro- or chloroazoalkane with LiAlH 4 or LiAlD 4 in ether. The preparation of a variety of symmetrical secondary azoalkanes demonstrates the applicability of the technique. The procedure is applicable to the synthesis of (sec-alkylazo)alkanes and presumably of (sec-alkylazo)-2,4,6-trichlorobenzenes. The isotope purity of the azoalkane is fixed by that of the azine or hydrazone precursor and of the LiAlD 4 . (U.S.)

  15. A chemoselective and continuous synthesis of m-sulfamoylbenzamide analogues

    Directory of Open Access Journals (Sweden)

    Arno Verlee

    2017-02-01

    Full Text Available For the synthesis of m-sulfamoylbenzamide analogues, small molecules which are known for their bioactivity, a chemoselective procedure has been developed starting from m-(chlorosulfonylbenzoyl chloride. Although a chemoselective process in batch was already reported, a continuous-flow process reveals an increased selectivity at higher temperatures and without catalysts. In total, 15 analogues were synthesized, using similar conditions, with yields ranging between 65 and 99%. This is the first automated and chemoselective synthesis of m-sulfamoylbenzamide analogues.

  16. Routing-based synthesis of digital microfluidic biochips

    DEFF Research Database (Denmark)

    Maftei, Elena; Pop, Paul; Madsen, Jan

    2012-01-01

    Microfluidic biochips are replacing the conventional biochemical analyzers, and are able to integrate on-chip all the necessary functions for biochemical analysis. The “digital” biochips are manipulating liquids as discrete droplets on a two-dimensional array of electrodes. Basic microfluidic...... of virtual devices and allow the droplets to move on the chip on any route during operation execution. Thus, the synthesis problem is transformed into a routing problem. We develop an algorithm based on a Greedy Randomized Adaptive Search Procedure (GRASP) and we show that routing-based synthesis leads...

  17. Direct oligonucleotide synthesis onto super-paramagnetic beads

    Science.gov (United States)

    Jensen, Michael A; Akhras, Michael S.; Fukushima, Marilyn; Pourmand, Nader; Davis, Ron W.

    2013-01-01

    Super-paramagnetic beads (SPMB)s used for a variety of molecular diagnostic assays are prepared by attaching pre-synthesized oligonucleotides to the surface via a cumbersome and low efficient method of carbodiimide-mediated amide bond formation. To mainstream the process, we describe a novel procedure of direct oligonucleotide synthesis onto the surface of SPMBs (e.g. MyOne Dynabeads). With the many challenges surrounding containment of paramagnetic beads (≤ 1 μm) during automated oligonucleotide synthesis, we show that by applying a magnetic force directly to the SPMBs we prevent their loss caused by high-pressure drain steps during synthesis. To date we have synthesized 40mers using a Spacer 9 phosphoramidite (triethylene glycol) coupled to the surface of hydroxylated SPMBs. HPLC analysis shows successful product generation with an average yield of 200 pmoles per sample. Furthermore, because of the versatility of this powerful research tool, we envision its use in any laboratory working with conventional synthesis automation, as employed for single columns and for multi-well titer plates. In addition to direct synthesis of oligodeoxynucleotides (DNA) onto SPMBs, this platform also has the potential for RNA and peptide nucleic acid synthesis. PMID:23942380

  18. Hydrocortisone Stimulation of RNA Synthesis in Induction of Hepatic Enzymes

    Energy Technology Data Exchange (ETDEWEB)

    Kenney, Francis T.; Wicks, Wesley D.; Greenman, David L.

    1965-10-01

    Increased synthesis of hepatic enzymes due to hydrocortisone is preceded by an increase in the rate of synthesis of nuclear RNA. Pulse-labeled RNA from liver nuclei was fractionated by a differential thermal phenol procedures, and the labeled RNA of each fraction was characterized by sucrose gradient centrifugation and base composition analysis. Hormone treatment increases the rate of synthesis of three types of RNA: (1) the nuclear precursor to ribosomal RNA, (2) a rapid turnover component with base composition similar to the tissue DNA, and (3) transfer RNA. Much of the total isotope incorporation into transfer RNA can be traced to turnover of the terminal adenylate residue, but this type of labeling is insensitive to the hormone. The steroid also stimulates isotope incorporation into tissue precursor pools. The effect is abolished by actinomycin and thus is secondary to the hormonal stimulation of RNA synthesis. Growth hormone stimulates RNA synthesis in both intact and adrenalectomized rats, but induces the rapid turnover enzymes (tyrosine transaminase and tryptophan pyrrolase) only in the presence of functional adrenals. It therefore seems that glucocorticoids initiate both a generalized increase in synthesis of RNA and a selective induction of specific enzymes.

  19. Automatic Setting Procedure for Exoskeleton-Assisted Overground Gait: Proof of Concept on Stroke Population.

    Science.gov (United States)

    Gandolla, Marta; Guanziroli, Eleonora; D'Angelo, Andrea; Cannaviello, Giovanni; Molteni, Franco; Pedrocchi, Alessandra

    2018-01-01

    Stroke-related locomotor impairments are often associated with abnormal timing and intensity of recruitment of the affected and non-affected lower limb muscles. Restoring the proper lower limbs muscles activation is a key factor to facilitate recovery of gait capacity and performance, and to reduce maladaptive plasticity. Ekso is a wearable powered exoskeleton robot able to support over-ground gait training. The user controls the exoskeleton by triggering each single step during the gait cycle. The fine-tuning of the exoskeleton control system is crucial-it is set according to the residual functional abilities of the patient, and it needs to ensure lower limbs powered gait to be the most physiological as possible. This work focuses on the definition of an automatic calibration procedure able to detect the best Ekso setting for each patient. EMG activity has been recorded from Tibialis Anterior, Soleus, Rectus Femoris, and Semitendinosus muscles in a group of 7 healthy controls and 13 neurological patients. EMG signals have been processed so to obtain muscles activation patterns. The mean muscular activation pattern derived from the controls cohort has been set as reference. The developed automatic calibration procedure requires the patient to perform overground walking trials supported by the exoskeleton while changing parameters setting. The Gait Metric index is calculated for each trial, where the closer the performance is to the normative muscular activation pattern, in terms of both relative amplitude and timing, the higher the Gait Metric index is. The trial with the best Gait Metric index corresponds to the best parameters set. It has to be noted that the automatic computational calibration procedure is based on the same number of overground walking trials, and the same experimental set-up as in the current manual calibration procedure. The proposed approach allows supporting the rehabilitation team in the setting procedure. It has been demonstrated to be

  20. Automatic Setting Procedure for Exoskeleton-Assisted Overground Gait: Proof of Concept on Stroke Population

    Directory of Open Access Journals (Sweden)

    Marta Gandolla

    2018-03-01

    Full Text Available Stroke-related locomotor impairments are often associated with abnormal timing and intensity of recruitment of the affected and non-affected lower limb muscles. Restoring the proper lower limbs muscles activation is a key factor to facilitate recovery of gait capacity and performance, and to reduce maladaptive plasticity. Ekso is a wearable powered exoskeleton robot able to support over-ground gait training. The user controls the exoskeleton by triggering each single step during the gait cycle. The fine-tuning of the exoskeleton control system is crucial—it is set according to the residual functional abilities of the patient, and it needs to ensure lower limbs powered gait to be the most physiological as possible. This work focuses on the definition of an automatic calibration procedure able to detect the best Ekso setting for each patient. EMG activity has been recorded from Tibialis Anterior, Soleus, Rectus Femoris, and Semitendinosus muscles in a group of 7 healthy controls and 13 neurological patients. EMG signals have been processed so to obtain muscles activation patterns. The mean muscular activation pattern derived from the controls cohort has been set as reference. The developed automatic calibration procedure requires the patient to perform overground walking trials supported by the exoskeleton while changing parameters setting. The Gait Metric index is calculated for each trial, where the closer the performance is to the normative muscular activation pattern, in terms of both relative amplitude and timing, the higher the Gait Metric index is. The trial with the best Gait Metric index corresponds to the best parameters set. It has to be noted that the automatic computational calibration procedure is based on the same number of overground walking trials, and the same experimental set-up as in the current manual calibration procedure. The proposed approach allows supporting the rehabilitation team in the setting procedure. It has been