WorldWideScience

Sample records for single span steel

  1. Design recommendations for long span composite slabs with deep profiled steel sheets

    NARCIS (Netherlands)

    Brekelmans, J.W.P.M.; Daniels, B.J.; Hove, B.W.E.M. van; Koukkari, H.; Stark, J.W.B.; Schuurman, R.G.

    1997-01-01

    As part of the ECSC research project `Steel intensive shallow floor construction', design recommendations for long span composite slabs with deep profiled steel deck have been drafted. These deep profiled steel sheets have depths of at least 200 mm. Test results and design recommendations are

  2. Comparative Research of Extra-large-span Cable-stayed Bridge with Steel Truss Girder and Steel Box Girder

    Directory of Open Access Journals (Sweden)

    Tan Manjiang

    2015-01-01

    Full Text Available To research structural performance of extra-large-span cable-stayed bridge under different section forms, with the engineering background of a 800m main-span cable-stayed bridge with steel truss girder, the cable-stayed bridge with steel box girder is designed according to the current bridge regulations when two bridges are designed in an ultimate state of the carrying capacity, so the maximum stress and minimum stress of the stress envelope diagram are substantially the same. A comprehensive comparison is given to two types of bridge on the aspect of static force, natural vibration frequency, stability, economic performance and so on. Analysis results provide future reference for the large-span cable-stayed bridge to select between the steel truss girder and the steel box girder.

  3. Steel Spans,

    Science.gov (United States)

    1984-01-31

    colors of rainbow crystalline chandeliers, the milk -white marble walls - everything as in the fairy tale! Even after the repeated invitation to go and...stubborn fellow. Hut- broken down, roof is straw. On meadow graze skinny horse, cow , three sheep. Here are they, the vestiges of the cursed past! We expended...8217% : ,- ,., :, . ..: , . .-. . . ... - . . . . .. . . . . . 9DOC =83052710 PAGE these kids . Blue-eyed Serezha Komarov did ask me: - - Really, comrade

  4. Finite element model updating of multi-span steel-arch-steel-girder bridges based on ambient vibrations

    Science.gov (United States)

    Hou, Tsung-Chin; Gao, Wei-Yuan; Chang, Chia-Sheng; Zhu, Guan-Rong; Su, Yu-Min

    2017-04-01

    The three-span steel-arch-steel-girder Jiaxian Bridge was newly constructed in 2010 to replace the former one that has been destroyed by Typhoon Sinlaku (2008, Taiwan). It was designed and built to continue the domestic service requirement, as well as to improve the tourism business of the Kaohsiung city government, Taiwan. This study aimed at establishing the baseline model of Jiaxian Bridge for hazardous scenario simulation such as typhoons, floods and earthquakes. Necessities of these precaution works were attributed to the inherent vulnerability of the sites: near fault and river cross. The uncalibrated baseline bridge model was built with structural finite element in accordance with the blueprints. Ambient vibration measurements were performed repeatedly to acquire the elastic dynamic characteristics of the bridge structure. Two frequency domain system identification algorithms were employed to extract the measured operational modal parameters. Modal shapes, frequencies, and modal assurance criteria (MAC) were configured as the fitting targets so as to calibrate/update the structural parameters of the baseline model. It has been recognized that different types of structural parameters contribute distinguishably to the fitting targets, as this study has similarly explored. For steel-arch-steel-girder bridges in particular this case, joint rigidity of the steel components was found to be dominant while material properties and section geometries relatively minor. The updated model was capable of providing more rational elastic responses of the bridge superstructure under normal service conditions as well as hazardous scenarios, and can be used for manage the health conditions of the bridge structure.

  5. Second-Order Nonlinear Analysis of Steel Tapered Beams Subjected to Span Loading

    Directory of Open Access Journals (Sweden)

    Ali Hadidi

    2014-03-01

    Full Text Available A second-order elastic analysis of tapered steel members with I-shaped sections subjected to span distributed and concentrated loadings is developed. Fixed end forces and moments as well as exact stiffness matrix of tapered Timoshenko-Euler beam are obtained with exact geometrical properties of sections. The simultaneous action of bending moment, shear, and axial force including P−δ effects is also considered in the analysis. A computer code has been developed in MATLAB software using a power series method to solve governing second-order differential equation of equilibrium with variable coefficients for beams with distributed span loading. A generalized matrix condensation technique is then utilized for analysis of beams with concentrated span loadings. The accuracy and efficiency of the results of the proposed method are verified through comparing them to those obtained from other approaches such as finite element methods, which indicates the robustness and time saving of this method even for large scale frames with tapered members.

  6. Fuzzy stochastic analysis of serviceability and ultimate limit states of two-span pedestrian steel bridge

    Science.gov (United States)

    Kala, Zdeněk; Sandovič, GiedrÄ--

    2012-09-01

    The paper deals with non-linear analysis of ultimate and serviceability limit states of two-span pedestrian steel bridge. The effects of random material and geometrical characteristics on limit states are analyzed. The Monte Carlo method was applied to stochastic analysis. For the serviceability limit state, also influence of fuzzy uncertainty of the limit deflection value on random characteristics of load capacity of variable action was studied. The results prove that, for the type of structure studied, the serviceability limit state is decisive from the point of view of design. The present paper opens a discussion on the use of stochastic analysis to verify the limit deflections given in the standards EUROCODES.

  7. Natural ventilation in insect screened single span greenhouses ...

    African Journals Online (AJOL)

    screened side vents were assessed in single greenhouses in terms of the difference in temperature and humidity inside and outside under tropical conditions. The A-frame (slanted roof) was comparatively advantageous over the conventional ...

  8. Design and evaluation of a single-span bridge using ultra-high performance concrete.

    Science.gov (United States)

    2009-09-01

    "Research presented herein describes an application of a newly developed material called Ultra-High Performance Concrete (UHPC) to a : single-span bridge. The two primary objectives of this research were to develop a shear design procedure for possib...

  9. Design Optimization of Long-Span Cold-Formed Steel Portal Frames Accounting for Effect of Knee Brace Joint Configuration

    Directory of Open Access Journals (Sweden)

    Thanh Duoc Phan

    2017-12-01

    Full Text Available The application of cold-formed steel channel sections for portal frames becomes more popular for industrial and residential purposes. Experimental tests showed that such structures with long-span up to 20 m can be achieved when knee brace joints are included. In this paper, the influence of knee brace configuration on the optimum design of long-span cold-formed steel portal frames is investigated. The cold-formed steel portal frames are designed using Eurocode 3 under ultimate limit states. A novel method in handling design constraints integrated with genetic algorithm is proposed for searching the optimum design of cold-formed steel portal frames. The result showed that the proposed routine for design optimization effectively searched the near global optimum solution with the computational time is approximate 50% faster than methods being popularly used in literature. The optimum configuration for knee brace joint can reduce the section size of rafter and so the lighter frame could be obtained especially for long-span portal frame. The minimum weight of main frame obtained from optimization process is approximate 19.72% lighter than a Benchmark Frame used in the full-scale experimental test.

  10. Single pit propagation on austenitic stainless steel

    International Nuclear Information System (INIS)

    Heurtault, Stephane

    2016-01-01

    The electrochemical characterization of metastable events such as pitting corrosion of stainless steel in chloride electrolyte remains complex because many individual processes may occur simultaneously on the alloy surface. To overcome these difficulties, an experimental setup, the flow micro-device, has been developed to achieve the initiation of a single pit and to propagate the single pit in three dimensions. In this work, we take advantage of such a device in order to revisit the pitting process on a 316L stainless steel in a chloride - sulphate bulk. In a first step, the time evolution of the pit geometry (depth, radius) and the chemical evolution of the pit solution investigated using in situ Raman spectroscopy have shown that the pit depth propagation depends on the formation of a metal chloride and sulphate gel in the pit solution, and is controlled by the metallic cations diffusion from the pit bottom to the pit mouth. The pit radius growth is defined by the initial surface de-passivation, by the presence of a pit cover and by the gel development in the solution. all of these phenomena are function of applied potential and chemical composition of the solution. In a last step, it was demonstrated that a critical chloride concentration is needed in order to maintain the pit propagation. This critical concentration slightly increases with the pit depth. From statistical analysis performed on identical experiments, a zone diagram showing the pit stability as a function of the chloride concentration and the pit dimensions was built. (author) [fr

  11. Span length and information rate optimisation in optical transmission systems using single-channel digital backpropagation.

    Science.gov (United States)

    Karanov, Boris; Xu, Tianhua; Shevchenko, Nikita A; Lavery, Domaniç; Killey, Robert I; Bayvel, Polina

    2017-10-16

    The optimisation of span length when designing optical communication systems is important from both performance and cost perspectives. In this paper, the optimisation of inter-amplifier spacing and the potential increase of span length at fixed information rates in optical communication systems with practically feasible nonlinearity compensation schemes have been investigated. It is found that in DP-16QAM, DP-64QAM and DP-256QAM systems with practical transceiver noise limitations, single-channel digital backpropagation can allow a 50% reduction in the number of amplifiers without sacrificing information rates compared to systems with optimal span lengths and linear compensation.

  12. Vortex-induced vibration of a slender single-span cylinder

    NARCIS (Netherlands)

    Oikou, N.

    2014-01-01

    The goal of this paper is to study the vortex-induced vibration of slender cylindrical structures. For this purpose, a 2D model that calculates the coupled cross-flow and in-line vibrations of a flexible single span beam is developed. A wake oscillator known to match well with free vibration

  13. Arch-Axis Coefficient Optimization of Long-Span Deck-Type Concrete-Filled Steel Tubular Arch Bridge

    Science.gov (United States)

    Liu, Q. J.; Wan, S.; Liu, H. C.

    2017-11-01

    This paper is based on Nanpuxi super major bridge which is under construction and starts from Wencheng Zhejiang province to Taishun highway. A finite element model of the whole bridge is constructed using Midas Civil finite element software. The most adverse load combination in the specification is taken into consideration to determine the method of calculating the arch-axis coefficient of long-span deck-type concrete-filled steel tubular arch bridge. By doing this, this paper aims at providing references for similar engineering projects.

  14. Analysis of the Working Cable System of Single-span Circulating Ropeway

    Directory of Open Access Journals (Sweden)

    Qin Jian

    2017-01-01

    Full Text Available Based on the analysis of the mutual interaction between bearing cable and traction cable of single-span circulating ropeway, the calculation method is proposed for working cables of ropeway with arbitrary loads. The 5 sets nonlinear equations are set up for the working cables according to the equal spans and altitude differences of the bearing cable and the traction cable, the constant of the load running space and the bearing cable length, and the tension balance of bearing cable and traction cable beside load. The resolving method is proposed based on the Newton iterative method. The correctness and feasibility of the method are proved by the results of engineering test. From the solution, the tension and coordinate of working cables can be obtained accurately, which is meaningful for the design and analysis of the freight ropeway.

  15. Span-to-depth ratio effect on shear strength of steel fiber-reinforced high-strength concrete deep beams using ANN model

    Science.gov (United States)

    Naik, Uday; Kute, Sunil

    2013-12-01

    The paper predicts the shear strength of high-strength steel fiber-reinforced concrete deep beams. It studies the effect of clear span-to-overall depth ratio on shear capacity of steel fiber high-strength deep beams using artificial neural network (ANN8). The three-layered model has eight input nodes which represent width, effective depth, volume fraction, fiber aspect ratio and shear span-to-depth ratio, longitudinal steel, compressive strength of concrete, and clear span-to-overall depth ratio. The model predicts the shear strength of high-strength steel fiber deep beams to be reasonably good when compared with the results of proposed equations by researchers as well as the results obtained by neural network (ANN7) which is developed for seven inputs excluding span-to-depth ratio. The developed neural network ANN8 proves the versatility of artificial neural networks to establish the relations between various parameters affecting complex behavior of steel fiber-reinforced concrete deep beams and costly experimental processes.

  16. Dynamic response analysis of single-span guideway caused by high speed maglev train

    OpenAIRE

    Shi, Jin; Wang, Ying-Jie

    2011-01-01

    High speed maglev is one of the most important reformations in the ground transportation systems because of its no physical contact nature. This paper intends to study the dynamic response of the single-span guideway induced by moving maglev train. The dynamic model of the maglev train-guideway system is established. In this model, a maglev train consists of three vehicles and each vehicle is regarded as a multibody system with 34 degrees-of-freedom. The guideway is modeled as a simply suppor...

  17. Weight optimization of large span steel truss structures with genetic algorithm

    International Nuclear Information System (INIS)

    Mojolic, Cristian; Hulea, Radu; Pârv, Bianca Roxana

    2015-01-01

    The paper presents the weight optimization process of the main steel truss that supports the Slatina Sport Hall roof. The structure was loaded with self-weight, dead loads, live loads, snow, wind and temperature, grouped in eleven load cases. The optimization of the structure was made using genetic algorithms implemented in a Matlab code. A total number of four different cases were taken into consideration when trying to determine the lowest weight of the structure, depending on the types of connections with the concrete structure ( types of supports, bearing modes), and the possibility of the lower truss chord nodes to change their vertical position. A number of restrictions for tension, maximum displacement and buckling were enforced on the elements, and the cross sections are chosen by the program from a user data base. The results in each of the four cases were analyzed in terms of weight, element tension, element section and displacement. The paper presents the optimization process and the conclusions drawn

  18. Dynamic response analysis of single-span guideway caused by high speed maglev train

    Directory of Open Access Journals (Sweden)

    Jin Shi

    Full Text Available High speed maglev is one of the most important reformations in the ground transportation systems because of its no physical contact nature. This paper intends to study the dynamic response of the single-span guideway induced by moving maglev train. The dynamic model of the maglev train-guideway system is established. In this model, a maglev train consists of three vehicles and each vehicle is regarded as a multibody system with 34 degrees-of-freedom. The guideway is modeled as a simply supported beam. Considering the motion-dependent nature of electromagnetic forces in the maglev system, an iterative approach is presented to compute the dynamic response of a maglev train-guideway system. The histories of the train traversing the guideways are simulated and the dynamic responses of the guideway and the train vehicles are calculated. A field experiment is carried out to verify the results of the analysis. The resonant conditions of single-span guideway are analyzed. The results show that all the dynamic indexes of train-guideway system are far less than permissive values of railway and maglev system, the vertical resonant of guideways caused by periodical excitations of the train will not happen.

  19. Increased of the capacity integral bridge with reinforced concrete beams for single span

    Science.gov (United States)

    Setiati, N. Retno

    2017-11-01

    Sinapeul Bridge that was built in 2012 in Sumedang is a bridge type using a full integral system. The prototype of integral bridge with reinforced concrete girder and single span 20 meters until this year had decreased capacity. The bridge was conducted monitoring of strain that occurs in the abutment in 2014. Monitoring results show that based on the data recorded, the maximum strain occurs at the abutment on the location of the integration of the girder of 10.59 x 10-6 tensile stress of 0.25 MPa (smaller than 150 x 10-6) with 3 MPa tensile stress as limit the occurrence of cracks in concrete. Sinapeul bridge abutment with integral system is still in the intact condition. Deflection of the bridge at the time of load test is 1.31 mm. But this time the bridge has decreased exceeded permission deflection (deflection occurred by 40 mm). Besides that, the slab also suffered destruction. One cause of the destruction of the bridge slab is the load factor. It is necessary for required effort to increase the capacity of the integral bridge with retrofitting. Retrofitting method also aims to restore the capacity of the bridge structure due to deterioration. Retrofitting can be done by shortening of the span or using Fibre Reinforced Polymer (FRC). Based on the results obtained by analysis of that method of retrofitting with Fibre Reinforced Polymer (FRC) is more simple and effective. Retrofitting with FRP can increase the capacity of the shear and bending moment becomes 41% of the existing bridge. Retrofitting with FRP method does not change the integral system on the bridge Sinapeul become conventional bridges.

  20. High-performance analysis of single interphase cells with custom DNA probes spanning translocation break points

    Science.gov (United States)

    Weier, Heinz-Ulli G.; Munne, S.; Lersch, Robert A.; Marquez, C.; Wu, J.; Pedersen, Roger A.; Fung, Jingly

    1999-06-01

    The chromatin organization of interphase cell nuclei, albeit an object of intense investigation, is only poorly understood. In the past, this has hampered the cytogenetic analysis of tissues derived from specimens where only few cells were actively proliferating or a significant number of metaphase cells could be obtained by induction of growth. Typical examples of such hard to analyze cell systems are solid tumors, germ cells and, to a certain extent, fetal cells such as amniocytes, blastomeres or cytotrophoblasts. Balanced reciprocal translocations that do not disrupt essential genes and thus do not led to disease symptoms exit in less than one percent of the general population. Since the presence of translocations interferes with homologue pairing in meiosis, many of these individuals experience problems in their reproduction, such as reduced fertility, infertility or a history of spontaneous abortions. The majority of translocation carriers enrolled in our in vitro fertilization (IVF) programs carry simple translocations involving only two autosomes. While most translocations are relatively easy to spot in metaphase cells, the majority of cells biopsied from embryos produced by IVF are in interphase and thus unsuitable for analysis by chromosome banding or FISH-painting. We therefore set out to analyze single interphase cells for presence or absence of specific translocations. Our assay, based on fluorescence in situ hybridization (FISH) of breakpoint-spanning DNA probes, detects translocations in interphase by visual microscopic inspection of hybridization domains. Probes are prepared so that they span a breakpoint and cover several hundred kb of DNA adjacent to the breakpoint. On normal chromosomes, such probes label a contiguous stretch of DNA and produce a single hybridization domain per chromosome in interphase cells. The translocation disrupts the hybridization domain and the resulting two fragments appear as physically separated hybridization domains in

  1. The TVT Glass Pavilion: Theoretical Study on a Highly Transparent Building Made with Long-Spanned TVT Portals Braced with Hybrid Glass-Steel Panels

    Directory of Open Access Journals (Sweden)

    Maurizio Froli

    2017-06-01

    Full Text Available In contemporary buildings, the architectural demand for a complete dematerialisation of load bearing structures can be satisfied only in limited cases with the exclusive structural use of glass. Otherwise, for challenging applications such as long spanned or high-rise structures, the use of hybrid glass-steel systems is mandatory. Glass, fragile but highly compressive resistant, is associated with steel, ductile and tensile resistant. The present research shows the feasibility study for a fully glazed pavilion made of six TVT (Travi Vitree Tensegrity portal frames longitudinally braced by pre-stressed hybrid glass panels. The frames are about 20 m in span and 8 m in height. Appropriate multiscalar FEM numerical analyses, calibrated on the collapse tests performed on previous TVT large-scale prototypes, stated that the structural performance would be able to withstand heavy static and dynamic loads and stated the observance of the Fail-Safe Design principles.

  2. Solar radiation transmissivity of a single-span greenhouse through measurements on scale models

    International Nuclear Information System (INIS)

    Papadakis, G.; Manolakos, D.; Kyritsis, S.

    1998-01-01

    The solar transmissivity of a single-span greenhouse has been investigated experimentally using a scale model, of dimensions 40 cm width and 80 cm length. The solar transmissivity was measured at 48 positions on the “ground” surface of the scale model using 48 small silicon solar cells. The greenhouse model was positioned horizontally on a specially made goniometric mechanism. In this way, the greenhouse azimuth could be changed so that typical days of the year could be simulated using different combinations of greenhouse azimuth and the position of the sun in the sky. The measured solar transmissivity distribution at the “ground” surface and the average greenhouse solar transmissivity are presented and analysed, for characteristic days of the year, for winter and summer for a latitude of 37°58′ (Athens, Greece). It is shown that for the latitude of 37°58′ N during winter, the E–W orientation is preferable to the N–S one. The side walls, and especially the East and West ones for the E–W orientation, reduce considerably the greenhouse transmissivity at areas close to the walls for long periods of the day when the angle of incidence of the solar rays to these walls is large. (author)

  3. Seismic assessment of a multi-span steel railway bridge in Turkey based on nonlinear time history

    Directory of Open Access Journals (Sweden)

    M. F. Yılmaz

    2018-01-01

    Full Text Available Many research studies have shown that bridges are vulnerable to earthquakes, graphically confirmed by incidents such as the San Fernando (1971 USA, Northridge (1994 USA, Great Hanshin (1995 Japan, and Chi-Chi (1999 Taiwan earthquakes, amongst many others. The studies show that fragility curves are useful tools for bridge seismic risk assessments, which can be generated empirically or analytically. Empirical fragility curves can be generated where damage reports from past earthquakes are available, but otherwise, analytical fragility curves can be generated from structural seismic response analysis. Earthquake damage data in Turkey are very limited, hence this study employed an analytical method to generate fragility curves for the Alasehir bridge. The Alasehir bridge is part of the Manisa–Uşak–Dumlupınar–Afyon railway line, which is very important for human and freight transportation, and since most of the country is seismically active, it is essential to assess the bridge's vulnerability. The bridge consists of six 30 m truss spans with a total span 189 m supported by 2 abutments and 5 truss piers, 12.5, 19, 26, 33, and 40 m. Sap2000 software was used to model the Alasehir bridge, which was refined using field measurements, and the effect of 60 selected real earthquake data analyzed using the refined model, considering material and geometry nonlinearity. Thus, the seismic behavior of Alasehir railway bridge was determined and truss pier reaction and displacements were used to determine its seismic performance. Different intensity measures were compared for efficiency, practicality, and sufficiency and their component and system fragility curves derived.

  4. Seismic assessment of a multi-span steel railway bridge in Turkey based on nonlinear time history

    Science.gov (United States)

    Yılmaz, Mehmet F.; Çağlayan, Barlas Ö.

    2018-01-01

    Many research studies have shown that bridges are vulnerable to earthquakes, graphically confirmed by incidents such as the San Fernando (1971 USA), Northridge (1994 USA), Great Hanshin (1995 Japan), and Chi-Chi (1999 Taiwan) earthquakes, amongst many others. The studies show that fragility curves are useful tools for bridge seismic risk assessments, which can be generated empirically or analytically. Empirical fragility curves can be generated where damage reports from past earthquakes are available, but otherwise, analytical fragility curves can be generated from structural seismic response analysis. Earthquake damage data in Turkey are very limited, hence this study employed an analytical method to generate fragility curves for the Alasehir bridge. The Alasehir bridge is part of the Manisa-Uşak-Dumlupınar-Afyon railway line, which is very important for human and freight transportation, and since most of the country is seismically active, it is essential to assess the bridge's vulnerability. The bridge consists of six 30 m truss spans with a total span 189 m supported by 2 abutments and 5 truss piers, 12.5, 19, 26, 33, and 40 m. Sap2000 software was used to model the Alasehir bridge, which was refined using field measurements, and the effect of 60 selected real earthquake data analyzed using the refined model, considering material and geometry nonlinearity. Thus, the seismic behavior of Alasehir railway bridge was determined and truss pier reaction and displacements were used to determine its seismic performance. Different intensity measures were compared for efficiency, practicality, and sufficiency and their component and system fragility curves derived.

  5. Solidification microstructures in single-crystal stainless steel melt pools

    Energy Technology Data Exchange (ETDEWEB)

    Sipf, J.B.; Boatner, L.A.; David, S.A.

    1994-03-01

    Development of microstructure of stationary melt pools of oriented stainless steel single crystals (70%Fe-15%Ni-15%Cr was analyzed. Stationary melt pools were formed by electron-beam and gas-tungsten-arc heating on (001), (011), and (111) oriented planes of the austenitic, fcc-alloy crystals. Characterization and analysis of resulting microstructure was carried out for each crystallographic plane and welding method. Results showed that crystallography which favors ``easy growth`` along the <100> family of directions is a controlling factor in the microstructural formation along with the melt-pool shape. The microstructure was found to depend on the melting method, since each method forms a unique melt-pool shape. These results are used in making a three-dimensional reconstruction of the microstructure for each plane and melting method employed. This investigation also suggests avenues for future research into the microstructural properties of electron-beam welds as well as providing an experimental basis for mathematical models for the prediction of solidification microstructures.

  6. The influence of Span-20 surfactant and micro-/nano-Chromium (Cr) Powder Mixed Electrical Discharge Machining (PMEDM) on the surface characteristics of AISI D2 hardened steel

    Science.gov (United States)

    Hosni, N. A. J.; Lajis, M. A.

    2018-04-01

    The application of powder mixed dielectric to improve the efficiency of electrical discharge machining (EDM) has been extensively studied. Therefore, PMEDM have attracted the attention of many researchers since last few decades. Improvement in EDM process has resulted in the use of span-20 surfactant and Cr powder mixed in dielectric fluid, which results in increasing machiniability, better surface quality and faster machining time. However, the study of powder suspension size of surface charateristics in EDM field is still limited. This paper presents the improvement of micro-/nano- Cr powder size on the surface characteristics of the AISI D2 hardened steels in PMEDM. It has found that the reacst layer in PMEDM improved by as high as 41-53 % compared to conventional EDM. Also notably, the combination of added Cr powder and span-20 surfactant reduced the recast layer thickness significantly especially in nano-Cr size. This improvement was great potential adding nano-size Cr powder to dielectric for machining performance.

  7. Simulation Study on Train-Induced Vibration Control of a Long-Span Steel Truss Girder Bridge by Tuned Mass Dampers

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2014-01-01

    Full Text Available Train-induced vibration of steel truss bridges is one of the key issues in bridge engineering. This paper talks about the application of tuned mass damper (TMD on the vibration control of a steel truss bridge subjected to dynamic train loads. The Nanjing Yangtze River Bridge (NYRB is taken as the research object and a recorded typical train load is included in this study. With dynamic finite element (FE method, the real-time dynamic responses of NYRB are analyzed based on a simplified train-bridge time-varying system. Thereinto, two cases including single train moving at one side and two trains moving oppositely are specifically investigated. According to the dynamic characteristics and dynamic responses of NYRB, the fourth vertical bending mode is selected as the control target and the parameter sensitivity analysis on vibration control efficiency with TMD is conducted. Using the first-order optimization method, the optimal parameters of TMD are then acquired with the control efficiency of TMD, the static displacement of Midspan, expenditure of TMDs, and manufacture difficulty of the damper considered. Results obtained in this study can provide references for the vibration control of steel truss bridges.

  8. STEEL CORROSION AT 600°C IN SINGLE AND DUAL CONDITION IN OXYFUEL ATMOSPHERE

    Directory of Open Access Journals (Sweden)

    Daniel Massari de Souza Coelho

    2014-10-01

    Full Text Available Coal-fired power plants using the Oxyfuel process are being developed to produce electricity with zero CO2 emission. Steels used in this and other processes are often exposed to different atmospheres in each side of the material, especially in heat exchangers and solid oxide fuel cells. Some studies have shown that steels exposed to different hydrogen partial pressures in each side have a different corrosion behavior from steels exposed to a single atmosphere condition. In this investigation, two experimental steels were studied at 600°C and 1 atm in dual atmospheres containing water vapor in one side and flue gas in the other and they were compared to steels oxidized in single atmospheres. The gas composition used is similar to the ones found in Oxyfuel coal power plants, where there is a great concentration of CO2, and also H2O and SO2. Analyses were made using SEM and TEM.

  9. Investigating the Effect of a North Wall on Energy Consumption of an East–West Oriented Single Span Greenhouse

    Directory of Open Access Journals (Sweden)

    H Ghasemi Mobtaker

    2017-10-01

    Full Text Available Introduction Greenhouse is a structure which provides the best condition for the maximum plants growth during the cold seasons. In cold climate zones such as Tabriz province, Iran, the greenhouse heating is one of the most energy consumers. It has been estimated that the greenhouse heating cost is attributed up to 30% of the total operational costs of the greenhouses. Renewable energy resources are clean alternatives that can be used in greenhouse heating. Among the renewable energy resources, solar energy has the highest potential around the world. In this regard, application of solar energy in greenhouse heating during the cold months of a year could be considerable. The rate of thermal energy required inside the greenhouse depends on the solar radiation received inside the greenhouse. Using a north brick wall in an east-west oriented greenhouse can increase the absorption of solar radiation and consequently reduces the thermal and radiation losses. Therefore, the main objective of the present study is to investigate the effect of implementing of a north wall on the solar radiation absorption and energy consumption of an east-west oriented single span greenhouse in Tabriz. Materials and Methods This study was carried out in Tabriz and a steady state analysis was used to predict the energy consumption of a single span greenhouse. For this purpose, thermal energy balance equations for different components of the greenhouse including the soil layer, internal air and plants were presented. For investigating the effect of the north wall on the energy consumption, the Ft and Fn parameters were used to calculate the radiation loss from the walls of the greenhouses. These factors were determined using a 3D–shadow analysis by Auto–CAD software. An east-west oriented single span greenhouse which has a north brick wall and is covered with a single glass sheet with 4 mm thickness was applied to validate the developed models. The measurements were

  10. Deck and Cable Dynamic Testing of a Single-span Bridge Using Radar Interferometry and Videometry Measurements

    Science.gov (United States)

    Piniotis, George; Gikas, Vassilis; Mpimis, Thanassis; Perakis, Harris

    2016-03-01

    This paper presents the dynamic testing of a roadway, single-span, cable-stayed bridge for a sequence of static load and ambient vibration monitoring scenarios. Deck movements were captured along both sideways of the bridge using a Digital Image Correlation (DIC) and a Ground-based Microwave Interfererometer (GBMI) system. Cable vibrations were measured at a single point location on each of the six cables using the GBMI technique. Dynamic testing involves three types of analyses; firstly, vibration analysis and modal parameter estimation (i. e., natural frequencies and modal shapes) of the deck using the combined DIC and GBMI measurements. Secondly, dynamic testing of the cables is performed through vibration analysis and experimental computation of their tension forces. Thirdly, the mechanism of cable-deck dynamic interaction is studied through their Power Spectra Density (PSD) and the Short Time Fourier Transform (STFT) analyses. Thereby, the global (deck and cable) and local (either deck or cable) bridge modes are identified, serving a concrete benchmark of the current state of the bridge for studying the evolution of its structural performance in the future. The level of synergy and complementarity between the GBMI and DIC techniques for bridge monitoring is also examined and assessed.

  11. Strain-hardening in nano-structured single phase steels: mechanisms and control.

    Science.gov (United States)

    Bouaziz, O; Barbier, D

    2012-11-01

    The detrimental effect of grain size refinement on the strain hardening is highlighted in single phase steels. A physical based approach for understanding the underlying mechanisms is presented. In order to overcome this limitation a promising metallurgical route exploiting the thermal stability of mechanically induced twins in austenitic steels has been successfully applied to a stainless grade confirming the opportunity to get nano-structured alloys exhibiting high yield stress with high strain-hardening.

  12. Multiple enhanced self-protected spanning trees based architecture for recovery from single failure in metro ethernet

    Science.gov (United States)

    Li, Yong; Chen, Wentao; Jin, Depeng; Su, Li; Zeng, Lieguang

    2008-11-01

    Carriers and service providers are rushing to provide Ethernet-based virtual private network services in metro area network (MAN) as the most cost effective way to address the needs of the enterprise network market. To address the fast recovery from any signal failure issue in the Metro Ethernet, we propose a metro Ethernet architecture based on multiple Enhanced Self-protected Spanning Trees (ESST). The recovery mechanism, named Birthday-based Link Replacing Mechanism (BLRM), in this architecture is able to transform a self-protected spanning tree into another spanning tree after any signal link or node failure. Simulation result demonstrates the effectiveness of the BLRM in achieving fast recovery.

  13. Boundary Spanning

    DEFF Research Database (Denmark)

    Zølner, Mette

    The paper explores how locals span boundaries between corporate and local levels. The aim is to better comprehend potentialities and challenges when MNCs draws on locals’ culture specific knowledge. The study is based on an in-depth, interpretive case study of boundary spanning by local actors...... in the period of post-acquisition when their organization is being integrated into the acquiring MNC. The paper contributes to the literature on boundary spanning in three ways: First, by illustrating that boundary spanning is performed by numerous organizational actors in a variety of positions in MNCs......, inclusively by locals in subsidiaries. Second, by showing that boundary spanning is ‘situated’ in the sense that its result depends on the kind of knowledge to be transmitted and the attitude of the receivers. A third contribution is methodological. The study illustrates that combining bottom-up grounded...

  14. Boundary Spanning

    DEFF Research Database (Denmark)

    Zølner, Mette

    The paper explores how locals span boundaries between corporate and local levels. The aim is to better comprehend potentialities and challenges when MNCs draws on locals’ culture specific knowledge. The study is based on an in-depth, interpretive case study of boundary spanning by local actors in...... approach with pattern matching is a way to shed light on the tacit local knowledge that organizational actors cannot articulate and that an exclusively inductive research is not likely to unveil....

  15. Repeated BCG treatment of mouse bladder selectively stimulates small GTPases and HLA antigens and inhibits single-spanning uroplakins

    Directory of Open Access Journals (Sweden)

    O'Donnell Michael A

    2007-11-01

    Full Text Available Abstract Background Despite being a mainstay for treating superficial bladder carcinoma and a promising agent for interstitial cystitis, the precise mechanism of Bacillus Calmette-Guerin (BCG remains poorly understood. It is particularly unclear whether BCG is capable of altering gene expression beyond its well-recognized pro-inflammatory effects and how this relates to its therapeutic efficacy. The objective of this study was to determine differentially expressed genes in the mouse bladder following repeated intravesical BCG therapy. Methods Mice were transurethrally instilled with BCG or pyrogen-free on days 1, 7, 14, and 21. Seven days after the last instillation, urothelia along with the submucosa was removed and amplified ds-DNA was prepared from control- and BCG-treated bladder mucosa and used to generate suppression subtractive hybridization (SSH. Plasmids from control- and BCG-specific differentially expressed clones and confirmed by Virtual Northern were then purified and the inserts were sequenced and annotated. Finally, chromatin immune precipitation combined with real-time polymerase chain reaction assay (ChIP/Q-PCR was used to validate SSH-selected transcripts. Results Repeated intravesical BCG treatment induced an up regulation of genes associated with antigen presentation (B2M, HLA-A, HLA-DQA1, HLA-DQB2, HLA-E, HLA-G, IGHG, and IGH and representatives of two IFNγ-induced small GTPase families: the GBPs (GBP1, GBP2, and GBP5 and the p47GTPases (IIGTP1, IIGTP2, and TGTP. Genes expressed in saline-treated bladders but down-regulated by BCG included: the single-spanning uroplakins (UPK3a and UPK2, SPRR2G, GSTM5, and RSP 19. Conclusion Here we introduced a hypothesis-generator approach to determine key genes involved in the urothelium/sumbmucosa responses to BCG therapy. Urinary bladder responds to repeated BCG treatment by up-regulating not only antigen presentation-related genes, but also GBP and p47 small GTPases, both potentially

  16. Rutherford backscattering, nuclear reaction and channeling studies of nitrogen implanted single-crystal stainless steel

    International Nuclear Information System (INIS)

    Ferguson, M.M.; Ewan, G.T.; Mitchell, I.V.; Plattner, H.H.

    1983-01-01

    The three different methods were used to investigate a single crystal of stainless steel implanted to different doses by 40 keV 15 N 2 + ions. Conclusions are drawn on the position of nitrogen; comparison is made with implantation of deuterium and neon. (G.Q.)

  17. Fire resistance of single pitched-roof steel portal frame

    Directory of Open Access Journals (Sweden)

    J. J. Ferrán Gozálvez

    2017-03-01

    Full Text Available The standard procedure of structural fire design is based on the simplified analysis of single members. This method leads to conservative results in the case of structures able to redistribution of forces. The failure mechanism affecting both life safety and fire propagation is unknown. This work proposes a methodology for the advanced fire calculation of single pitched-roof portal frame for an agroindustrial building according to the Spanish Specifications with the structural software SAP2000. A non-linear dynamic and plastic, geometric (P-Delta and large-displacements calculation method has been developed. The different failure mechanisms and their influence are studied in terms of fire time resistance, human hazard and good safety. Also, parametric analyses were conducted: load level, rotational stiffness of the base and finally, support fire protection.

  18. Deformation relief evolution during sliding friction of Hadfield steel single crystal

    Science.gov (United States)

    Lychagin, D. V.; Filippov, A. V.; Novitskaya, O. S.; Kolubaev, A. V.; Sizova, O. V.

    2017-12-01

    The paper deals with the evolution of the deformation relief formed on lateral faces of single crystals of Hadfield steel during dry sliding friction. The use of single crystals with the predetermined orientation enables to analyze the development of shear systems subject to the duration of tribological tests. As the test duration increases, slip bands are curved and thicken in the near-surface region. After 24 hours of friction, single crystals of Hadfield steel demonstrate the maximum hardening. Afterwards, the wear process begins, which is followed by the repeated strain hardening of the specimens. After 48 hours of friction, the height of the deformation relief nearly halves on all of the three faces, as compared to that observed after 24 hours of friction. Differences in the propagation height of slip bands on the faces occur due to the uneven running-in as well as the complex involvement pattern of shear systems into the deformation process.

  19. Microstructural evolution of reduced-activation martensitic steel under single and sequential ion irradiations

    International Nuclear Information System (INIS)

    Luo, Fengfeng; Guo, Liping; Jin, Shuoxue; Li, Tiecheng; Zheng, Zhongcheng; Yang, Feng; Xiong, Xuesong; Suo, Jinping

    2013-01-01

    Microstructural evolution of super-clean reduced-activation martensitic steels irradiated with single-beam (Fe + ) and sequential-beam (Fe + plus He + ) at 350 °C and 550 °C was studied. Sequential-beam irradiation induced smaller size and larger number density of precipitates compared to single-beam irradiation at 350 °C. The largest size of cavities was observed after sequential-beam irradiation at 550 °C. The segregation of Cr and W and depletion of Fe in carbides were observed, and the maximum depletion of Fe and enrichment of Cr occurred under irradiation at 350 °C

  20. Strength Comparison of Flawed Single-Layer and Multilayer AISI 301 Stainless Steel Pressure Vessels at Cryogenic Temperatures

    National Research Council Canada - National Science Library

    Pierce, William

    1965-01-01

    An experimental investigation was conducted to determine the strengths of single-layer and multilayer scale model tanks of AISI 301 stainless steel containing sharp notches and having the same total wall thickness...

  1. Effect of Single and Double Pass Arc Welding on HAZ of High Carbon Steel Weldments

    Directory of Open Access Journals (Sweden)

    Alaa Abdul Hasan Atiyah

    2018-01-01

    Full Text Available Measurements of heat affected zone width for multi high carbon steel joint in case of single and double pass arc welded have been studied. These measurements are carried out in accompanying of hardness and microstructural observations. Knowing that, high carbon steel has a poor weld ability and most of welding processes are carried out for repairing components. It is found that a preheating was a very important parameter in identifying the width of heat-affected zone. Preheating the joint at 450°C was found to gives less width heat affected zone (i.e.5.93mm in the case of single pass welding practices. While, in the case of double pass welding, the heat affected zone becomes wider because the excessive heating during welding cycle. The double pass welding has coarsening the structure of first pass. Microscopic observations indicated that the structure of HAZ of high carbon steel was mainly lath martensite (ML under the condition of lower weld heat input. 

  2. Temporal Variation in Single-Cell Power-Law Rheology Spans the Ensemble Variation of Cell Population.

    Science.gov (United States)

    Cai, PingGen; Takahashi, Ryosuke; Kuribayashi-Shigetomi, Kaori; Subagyo, Agus; Sueoka, Kazuhisa; Maloney, John M; Van Vliet, Krystyn J; Okajima, Takaharu

    2017-08-08

    Changes in the cytoskeletal organization within cells can be characterized by large spatial and temporal variations in rheological properties of the cell (e.g., the complex shear modulus G ∗ ). Although the ensemble variation in G ∗ of single cells has been elucidated, the detailed temporal variation of G ∗ remains unknown. In this study, we investigated how the rheological properties of individual fibroblast cells change under a spatially confined environment in which the cell translational motion is highly restricted and the whole cell shape remains unchanged. The temporal evolution of single-cell rheology was probed at the same measurement location within the cell, using atomic force microscopy-based oscillatory deformation. The measurements reveal that the temporal variation in the power-law rheology of cells is quantitatively consistent with the ensemble variation, indicating that the cell system satisfies an ergodic hypothesis in which the temporal statistics are identical to the ensemble statistics. The autocorrelation of G ∗ implies that the cell mechanical state evolves in the ensemble of possible states with a characteristic timescale. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  3. A X-ray microscope for stored energy in single grains of cold-rolled steel

    International Nuclear Information System (INIS)

    Drakopoulos, M.; Snigireva, I.; Snigirev, A.; Castelnau, O.; Chauveau, T.; Bacroix, B.; Schroer, C.; Ungar, T.

    2000-01-01

    A new set-up for X-ray microdiffraction has been developed on the ESRF beamline ID22. This set-up allows microscopic characterization of materials in diffraction mode, the size of the focused beam being only of a few microns. This facilitates the measurement of material quantities as average size of the coherently diffracting volume, local dislocation density, residual stress, local fluctuation of the residual stress, and intragranular misorientation from single grains of a polycrystalline material. The first application on an IF-Ti steel after different thermomechanical treatments (recrystallization, cold-rolling, annealing) is presented

  4. Microstructural evolution of reduced-activation martensitic steel under single and sequential ion irradiations

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Fengfeng [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Hubei Nuclear Solid Physics Key Laboratory and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Guo, Liping, E-mail: guolp@whu.edu.cn [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Hubei Nuclear Solid Physics Key Laboratory and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Jin, Shuoxue; Li, Tiecheng; Zheng, Zhongcheng [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Hubei Nuclear Solid Physics Key Laboratory and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Yang, Feng; Xiong, Xuesong; Suo, Jinping [State Key Laboratory of Mould Technology, Institute of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2013-07-15

    Microstructural evolution of super-clean reduced-activation martensitic steels irradiated with single-beam (Fe{sup +}) and sequential-beam (Fe{sup +} plus He{sup +}) at 350 °C and 550 °C was studied. Sequential-beam irradiation induced smaller size and larger number density of precipitates compared to single-beam irradiation at 350 °C. The largest size of cavities was observed after sequential-beam irradiation at 550 °C. The segregation of Cr and W and depletion of Fe in carbides were observed, and the maximum depletion of Fe and enrichment of Cr occurred under irradiation at 350 °C.

  5. Impact of Intragranular Substructure Parameters on the Forming Limit Diagrams of Single-Phase B.C.C. Steels

    Directory of Open Access Journals (Sweden)

    Gérald Franz

    2013-11-01

    Full Text Available An advanced elastic-plastic self-consistent polycrystalline model, accounting for intragranular microstructure development and evolution, is coupled with a bifurcation-based localization criterion and applied to the numerical investigation of the impact of microstructural patterns on ductility of single-phase steels. The proposed multiscale model, taking into account essential microstructural aspects, such as initial and induced textures, dislocation densities, and softening mechanisms, allows us to emphasize the relationship between intragranular microstructure of B.C.C. steels and their ductility. A qualitative study in terms of forming limit diagrams for various dislocation networks, during monotonic loading tests, is conducted in order to analyze the impact of intragranular substructure parameters on the formability of single-phase B.C.C. steels.

  6. The multilayer and wide-deck vibrating screen based on the innovative long-span vibration exciter

    Science.gov (United States)

    Zeng, Ming; Xu, Zonglin; Zhang, Jinnan; Zhang, Minghong

    2017-09-01

    The multilayer and wide-deck innovative single plasmid vibration screen is applicable to the petroleum drilling and the other relevant industries. The structural features and advantages of the components are illustrated, and the innovative long-span vibration exciter together with the steel rope saddle block flexible coupling is emphatically analyzed. Two engineering examples are provided to make the explanation.

  7. Acoustic emission evolution during sliding friction of Hadfield steel single crystal

    Science.gov (United States)

    Lychagin, D. V.; Novitskaya, O. S.; Kolubaev, A. V.; Sizova, O. V.

    2017-12-01

    Friction is a complex dynamic process. Direct observation of processes occurring in the friction zone is impossible due to a small size of a real contact area and, as a consequence, requires various additional methods applicable to monitor a tribological contact state. One of such methods consists in the analysis of acoustic emission data of a tribological contact. The use of acoustic emission entails the problem of interpreting physical sources of signals. In this paper, we analyze the evolution of acoustic emission signal frames in friction of Hadfield steel single crystals. The chosen crystallographic orientation of single crystals enables to identify four stages related to friction development as well as acoustic emission signals inherent in these stages. Acoustic emission signal parameters are studied in more detail by the short-time Fourier transform used to determine the time variation of the median frequency and its power spectrum. The results obtained will facilitate the development of a more precise method to monitor the tribological contact based on the acoustic emission method.

  8. Clinical Results and Technical Complications of Posterior Implant-Supported Modified Monolithic Zirconia Single Crowns and Short-Span Fixed Dental Prostheses: A 2-Year Pilot Study.

    Science.gov (United States)

    Cheng, Chih-Wen; Chien, Chia-Hui; Chen, Chun-Jung; Papaspyridakos, Panos

    2018-02-01

    The purpose of this clinical trial was to investigate the clinical outcomes of implant-supported modified monolithic zirconia single crowns (SCs) and short-span fixed dental prostheses (FDPs) after a follow-up of 2 years. Twenty-seven patients in need of implant-supported SCs or 3-unit FDPs in the posterior maxilla or mandible were consecutively selected for this study. A total of 56 modified monolithic zirconia prostheses including 44 SCs (8 screw-retained, 36 cement-retained) and twelve 3-unit FDPs (5 screw-retained, 7 cement-retained) were included in this study. All patients were followed at 6 months, 12 months, 18 months, and 2 years after placement of the modified monolithic zirconia prostheses. During the follow-up period, all prostheses were evaluated with clinical and radiographic examinations. The following technical parameters were assessed: framework fracture, fracture of veneering porcelain, screw loosening, loss of retention because of prosthesis de-cementation and opposing tooth fracture. No implant was lost during the follow-up period, yielding a 2-year implant survival of 100%. One FDP failed because of framework fracture. The overall prosthesis survival rate was 98.2% after 2 years of clinical service. During the study, 5 complication events were observed in 3 SCs and one FDP, including one fracture of veneering porcelain and 2 screw loosenings in 3 SCs, and loss of retention and opposing tooth fracture in the same FDP. Therefore, the complication-free rate of prostheses was 91.1%. According to the results of this study, the modified monolithic zirconia design used in this study resulted in a favorable short-term outcome for posterior implant-supported SCs and 3-unit FDPs. © 2017 by the American College of Prosthodontists.

  9. Analysis of human rotaviruses from a single location over an 18-year time span suggests that protein coadaption influences gene constellations.

    Science.gov (United States)

    Zhang, Shu; McDonald, Paul W; Thompson, Travis A; Dennis, Allison F; Akopov, Asmik; Kirkness, Ewen F; Patton, John T; McDonald, Sarah M

    2014-09-01

    from other strains via a process called reassortment. However, little is known about the relationship between mutation accumulation and gene reassortment for rotaviruses and how it impacts viral evolution. In this study, we analyzed the genome sequences of human strains found in clinical fecal specimens that were collected at a single hospital over an 18-year time span. We found that many rotaviruses did not reassort their genes but instead maintained them as specific sets (i.e., constellations). By analyzing the encoded proteins, we discovered concurrent amino acid changes among them, which suggests that they are functionally coadapted to operate best when kept together. This study increases our understanding of how rotaviruses evolve over time in the human population. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  10. Strength and Failure Mechanism of Composite-Steel Adhesive Bond Single Lap Joints

    Directory of Open Access Journals (Sweden)

    Kai Wei

    2018-01-01

    Full Text Available Carbon fiber-reinforced plastics- (CFRP- steel single lap joints with regard to tensile loading with two levels of adhesives and four levels of overlap lengths were experimentally analyzed and numerically simulated. Both joint strength and failure mechanism were found to be highly dependent on adhesive type and overlap length. Joints with 7779 structural adhesive were more ductile and produced about 2-3 kN higher failure load than MA830 structural adhesive. Failure load with the two adhesives increased about 147 N and 176 N, respectively, with increasing 1 mm of the overlap length. Cohesion failure was observed in both types of adhesive joints. As the overlap length increased, interface failure appeared solely on the edge of the overlap in 7779 adhesive joints. Finite element analysis (FEA results revealed that peel and shear stress distributions were nonuniform, which were less severe as overlap length increased. Severe stress concentration was observed on the overlap edge, and shear failure of the adhesive was the main reason for the adhesive failure.

  11. The influnece of the partial single reduction on mechanical properties wires made from trip steel with 0,43 % C

    Directory of Open Access Journals (Sweden)

    S. Wiewiórowska

    2015-01-01

    Full Text Available Large strain inhomogeneity is caused by the shape of deformation zone of die and by the friction between tool and deformed wire for multistage wire drawing processes. The influence on the value of the redundant strain by the use of different partial single reductions during all wire drawing process was observed. This problem is particularly important for TRIP steel wires drawing processes because the strain intensity influences on the speed of retained austenite transformation into martensite.

  12. Single and multi degree of freedom analysis of steel beams under blast loading

    International Nuclear Information System (INIS)

    Nassr, Amr A.; Razaqpur, A. Ghani; Tait, Michael J.; Campidelli, Manuel; Foo, Simon

    2012-01-01

    Highlights: ► Experimentally tested beams under blast are analyzed using SDOF and MDOF models. ► SDOF model adequately captures the time dependant deformations and internal forces. ► Constant DIF based on a low strain rate leads to conservative estimate of the DIF. ► The responses of the test beams are governed by the first mode of vibration. - Abstract: This paper presents detailed analysis of the results of field tests on 13 full scale wide flange steel beams subjected to blast loads generated by the detonation of up to 250 kg of ANFO explosive. The experimental results are analyzed using an equivalent Single-Degree-of-Freedom (SDOF) model of a beam, which includes material nonlinearity and strain rate effects. To account for strain rate effect on beam stiffness and strength, its full moment-curvature response is determined by dividing its cross-section into a number of layers and a strain rate-dependent stress-strain relationship, based on the Cowper–Symonds strain rate model, is used to capture the nonlinear stress distribution over the section. To determine the effects of higher modes of vibration and the variation of beam mechanical properties along its length on its dynamic response, the test beams are also analyzed using a Multi-Degree-of-Freedom (MDOF) model involving beam finite elements. Each element has two nodes and three degrees of freedom and is again divided into a number of layers to capture the strain rate effect and nonlinear stress distribution over its depth. The predicted displacements and strains by the two models are compared with the corresponding experimental data and the results show that for the given beams, the time-dependant deformations, internal forces, and moments can be adequately predicted by either model because the first mode of vibration is found to dominate their response; however, the use of a constant strain rate through the so-called Dynamic Increase Factor (DIF) can lead to highly conservative estimate of the

  13. Characterization of the corrosion behavior of the carbon steel liner in Hanford Site single-shell tanks

    International Nuclear Information System (INIS)

    Anantatmula, R.P.; Schwenk, E.B.; Danielson, M.J.

    1994-06-01

    Six safety initiatives have been identified for accelerating the resolution of waste tank safety issues and closure of unreviewed safety questions. Safety Initiative 5 is to reduce safety and environmental risk from tank leaks. Item d of Safety Initiative 5 is to complete corrosion studies of single-shell tanks to determine failure mechanisms and corrosion control options to minimize further degradation by June 1994. This report has been prepared to fulfill Safety Initiative 5, Item d. The corrosion mechanisms that apply to Hanford Site single-shell tanks are stress corrosion cracking, pitting/crevice corrosion, uniform corrosion, hydrogen embrittlement, and microbiologically influenced corrosion. The corrosion data relevant to the single-shell tanks dates back three decades, when results were obtained from in-situ corrosion coupons in a few single-shell tanks. Since that time there have been intertank transfers, evaporation, and chemical alterations of the waste. These activities have changed the character and the present composition of the waste is not well characterized. All conclusions and recommendations are made in the absence of relevant laboratory experimental data and tank inspection data. The report attempts to identify the failure mechanisms by a literature survey of carbon steel data in environments similar to the single-shell tank wastes, and by a review of the work performed at the Savannah River Site where similar wastes are stored in similar carbon steel tanks. Based on these surveys, and in the absence of data specific to Hanford single-shell tanks, it may be concluded that the single-shell tanks identified as leakers failed primarily by stress corrosion cracking due to the presence of high nitrate/low hydroxide wastes and residual stresses. In addition, some failures may be attributed to pitting under crevices in low hydroxide locations

  14. Study of a steel strand tension sensor with difference single bypass excitation structure based on the magneto-elastic effect

    International Nuclear Information System (INIS)

    Tang Dedong; Huang Shanglian; Chen Weimin; Jiang Jianshan

    2008-01-01

    With many steel strands used in various important machines and architectural structures, health monitoring of strand tension becomes more and more important to ensure the equipment or structures' safety. Contrasted with the method of vibration frequency and strain gages, the method of measuring the steel strand tension based on the magneto-elastic effect is more capable of meeting the requirements of health monitoring. Yet the structure of the sensor is mainly a sleeve structure, and the steel strand to be measured serves as the core of primary and secondary solenoids. This structure is very difficult to fix and maintain. On the other hand, a change of temperature will strongly affect measurement results, and experiments prove that temperature error compensation by using a temperature compensation curve is not effective enough. Therefore in this paper the principle of a cable tension sensor based on the magneto-elastic effect is expounded, the theory of temperature influence is explored, a difference structure by single bypass excitation is devised, its magnetic loop is analyzed, an experiment is designed, and experiments on temperature compensation and pulling tension are carried out. The experiment results indicated that the structure of the sensor is feasible, temperature errors can be compensated for automatically, after which temperature errors become less than 0.012 MPa °C −1 , and repeating errors of tension are less than 0.15%, which meet the measurement requirements

  15. Study of a steel strand tension sensor with difference single bypass excitation structure based on the magneto-elastic effect

    Science.gov (United States)

    Tang, Dedong; Huang, Shanglian; Chen, Weimin; Jiang, Jianshan

    2008-04-01

    With many steel strands used in various important machines and architectural structures, health monitoring of strand tension becomes more and more important to ensure the equipment or structures' safety. Contrasted with the method of vibration frequency and strain gages, the method of measuring the steel strand tension based on the magneto-elastic effect is more capable of meeting the requirements of health monitoring. Yet the structure of the sensor is mainly a sleeve structure, and the steel strand to be measured serves as the core of primary and secondary solenoids. This structure is very difficult to fix and maintain. On the other hand, a change of temperature will strongly affect measurement results, and experiments prove that temperature error compensation by using a temperature compensation curve is not effective enough. Therefore in this paper the principle of a cable tension sensor based on the magneto-elastic effect is expounded, the theory of temperature influence is explored, a difference structure by single bypass excitation is devised, its magnetic loop is analyzed, an experiment is designed, and experiments on temperature compensation and pulling tension are carried out. The experiment results indicated that the structure of the sensor is feasible, temperature errors can be compensated for automatically, after which temperature errors become less than 0.012 MPa °C-1, and repeating errors of tension are less than 0.15%, which meet the measurement requirements.

  16. Fire-induced collapses of steel structures

    DEFF Research Database (Denmark)

    Dondera, Alexandru; Giuliani, Luisa

    Single-story steel buildings such as car parks and industrial halls are often characterised by stiff beams and flexible columns and may experience an outward (sway) collapse during a fire, endangering people and properties outside the building. It is therefore a current interest of the research...... to investigate the collapse behaviour of single-story steel frames and identify relevant structural characteristics that influence the collapse mode. In this paper, a parametric study on the collapse a steel beam-column assembly with beam hinged connection and fixed column support is carried out under...... the assumption of a protected column and a standard temperature-time curve on the beam. The study shows that sway collapse can be avoided by increasing either the restrain offered by the column or the load-to-resistance ratio of the beam. It seems possible to extend these results to multi-span frames...

  17. Inhibition of Crack Propagation of High Strength Steels through Single and Multifunctional Inhibitors

    Science.gov (United States)

    1976-08-01

    19 197(I .... ..................... I .. ........................’I ........................ .. . L -,, I l nM= I- _. PMGIf iii DLU4~ lUZ TABLE OF...TABLES TABLE PA(,E 1. Composition of D6AC Steel .................... 10 *2. Potential-pH Data, D6AC in Artificial Crevice Cell. ...... 11 *3. Measured pH...Gage in Position on Frac- ture Toughness Specimen in Testing Grips ..... ........... 16 3. Artificial Crevice Cell Results, pH 2.1 to 8.1

  18. C.O.D. toughness testing of medium strength steel as a preliminary development for single specimen J integral toughness tests of SA533-B steel

    International Nuclear Information System (INIS)

    Dean, P.; Tait, R.B.; Garrett, G.G.

    1981-10-01

    The primary purpose of this project is to set up a test facility and to develop the necessary expertise to enable reliable elasto-plastic fracture toughness tests to be performed. Initially, tests are to be conducted on material similar to that used in the Koeberg pressure vessel walls, with the ultimate goal of performing single specimen J integral tests on the pressure vessel steel itself to determine through-thickness toughness variations. The project will comprise a number of stages, each one necessary for the development of the techniques used in J integral testing. These include: (i) development of an appropriate specimen design, of suitable size and shape that is applicable to both crack opening displacement (C.O.D.) and J integral tests; (ii) development, testing and calibration of the necessary associated mechanical and electrical equipment (e.g. clip gauge, amplifiers, interface unit, etc.), with (iii) an estimation of the probable errors and noise levels with a view to their elimantion, leading to (iv) perfection of the sensitivity and reproducibility of, firstly, the multiple specimen C.O.D. technique and, secondly, the multiple specimen J integral techniques. (v) Based on the above techniques, development of the single specimen J integral test method incorporating development of a computerised testing procedure. All the above procedure is to be conducted on similar, but non-Koeberg pressure vessel material ('ROQ Tough'). (vi) Finally, development and testing of both multiple specimen and single specimen J integral tests on actual SA533B material and an investigation of the through thickness toughness and fatigue crack propagation behaviour

  19. Residual strains and microstructure development in single and sequential double sided friction stir welds in RQT-701 steel

    International Nuclear Information System (INIS)

    Barnes, S.J.; Steuwer, A.; Mahawish, S.; Johnson, R.; Withers, P.J.

    2008-01-01

    Single and double sided partial penetration friction stir butt welds, in a rolled, quenched and tempered steel (RQT-701), were produced at The Welding Institute (TWI) under controlled process conditions. The residual strain distributions in the longitudinal and transverse directions have been measured using energy dispersive synchrotron X-ray diffraction. The measured strains were indicative of longitudinal tensile residual stresses at levels greater than the 0.2% yield stress of the parent metal in both the single and double pass welds. In both cases, the maximum tensile strain was found in the parent metal at the boundary of the heat affected zone (HAZ). Microstructural analysis of the welds was carried out using optical microscopy and hardness variations were also mapped across the weld-plate cross-section. The maximum hardness was observed in the mixed bainite/martensite structure of the weld nugget on the advancing side of the stir zone. The minimum hardness was observed in the HAZ

  20. Microstructural and thermal stability of selective laser melted 316L stainless steel single tracks

    Directory of Open Access Journals (Sweden)

    Krakhmalev, P.

    2017-05-01

    Full Text Available To remove residual stresses, an as-built SLM object is usually post- treated. This treatment can affect the microstructure, changing the final mechanical characteristics. This investigation is focused on the microstructural characterisation of 316L austenitic stainless steel in as-built and annealed conditions. The SLM microstructure was relatively stable up to 900°C, when cell boundaries start to disappear. At higher temperatures, an insignificant grain coarsening was detected. These microstructural changes caused a gradual drop in the hardness. The obtained result is background for the future development of post-treatment regimens to achieve a high level in the final mechanical properties of SLM objects.

  1. Formic acid decomposition on Pt1/Cu (111) single platinum atom catalyst: Insights from DFT calculations and energetic span model analysis

    Science.gov (United States)

    Wang, Ying-Fan; Li, Kun; Wang, Gui-Chang

    2018-04-01

    Inspired by the recent surface experimental results that the monatomic Pt catalysts has more excellent hydrogen production that Cu(111) surface, the mechanism of decomposition of formic acid on Cu(111) and single atom Pt1/Cu(111) surface was studied by periodic density functional theory calculations in the present work. The results show that the formic acid tends to undergo dehydrogenation on both surfaces to obtain the hydrogen product of the target product, and the selectivity and catalytic activity of Pt1/Cu (111) surface for formic acid dehydrogenation are better. The reason is that the single atom Pt1/Cu(111) catalyst reduces the reaction energy barrier (i.e., HCOO → CO2 + H) of the critical step of the dehydrogenation reaction due to the fact that the single atom Pt1/Cu(111) catalyst binds formate weakly compared to that of Cu (111) one. Moreover, it was found that the Pt1/Cu (111) binds CO more strongly than that of Cu (111) one and thus leading to the difficult for the formation of CO. These two factors would make the single Pt atom catalyst had the high selectivity for the H2 production. It is hoped that the present work may help people to design the efficient H2 production from HCOOH decomposition by reduce the surface binding strength of HCOO species, for example, using the low coordination number active site like single atom or other related catalytic system.

  2. Experimental and Numerical Investigations of Fretting Fatigue Behavior for Steel Q235 Single-Lap Bolted Joints

    Directory of Open Access Journals (Sweden)

    Yazhou Xu

    2016-01-01

    Full Text Available This work aims to investigate the fretting fatigue life and failure mode of steel Q235B plates in single-lap bolted joints. Ten specimens were prepared and tested to fit the S-N curve. SEM (scanning electron microscope was then employed to observe fatigue crack surfaces and identify crack initiation, crack propagation, and transient fracture zones. Moreover, a FEM model was established to simulate the stress and displacement fields. The normal contact stress, tangential contact stress, and relative slipping displacement at the critical fretting zone were used to calculate FFD values and assess fretting fatigue crack initiation sites, which were in good agreement with SEM observations. Experimental results confirmed the fretting fatigue failure mode for these specimens. It was found that the crack initiation resulted from wear regions at the contact surfaces between plates, and fretting fatigue cracks occurred at a certain distance away from hole edges. The proposed FFD-N relationship is an alternative approach to evaluate fretting fatigue life of steel plates in bolted joints.

  3. Experimental and numerical study on optimization of the single point incremental forming of AINSI 304L stainless steel sheet

    Science.gov (United States)

    Saidi, B.; Giraud-Moreau, L.; Cherouat, A.; Nasri, R.

    2017-09-01

    AINSI 304L stainless steel sheets are commonly formed into a variety of shapes for applications in the industrial, architectural, transportation and automobile fields, it’s also used for manufacturing of denture base. In the field of dentistry, there is a need for personalized devises that are custom made for the patient. The single point incremental forming process is highly promising in this area for manufacturing of denture base. The single point incremental forming process (ISF) is an emerging process based on the use of a spherical tool, which is moved along CNC controlled tool path. One of the major advantages of this process is the ability to program several punch trajectories on the same machine in order to obtain different shapes. Several applications of this process exist in the medical field for the manufacturing of personalized titanium prosthesis (cranial plate, knee prosthesis...) due to the need of product customization to each patient. The objective of this paper is to study the incremental forming of AISI 304L stainless steel sheets for future applications in the dentistry field. During the incremental forming process, considerable forces can occur. The control of the forming force is particularly important to ensure the safe use of the CNC milling machine and preserve the tooling and machinery. In this paper, the effect of four different process parameters on the maximum force is studied. The proposed approach consists in using an experimental design based on experimental results. An analysis of variance was conducted with ANOVA to find the input parameters allowing to minimize the maximum forming force. A numerical simulation of the incremental forming process is performed with the optimal input process parameters. Numerical results are compared with the experimental ones.

  4. A recalculation of the dose-effect-relationship of the ''life span study'' of Hiroshima and Nagasaki with the ''single-hit model''

    International Nuclear Information System (INIS)

    Kottbauer, M.M.; Fleck, C.M.; Schoellnberger, H.

    1996-01-01

    The basis of this new model is the multistage process of carcinogeneses. The Single-Hit Model is a further development of the Armitage-Doll Model [1] for the special case of a short exposure. It provides simultaneously the age-dependent mortality-rate (incidence-rate) of the spontaneous and radiation induced solid tumors and dose-effect relationships at any age after exposure. The model results in a biologically based dose-effect relationship, which is similar to the Relativ-Risk-Model suggested by the ICRP 60 [2]. The present model is able to describe the increased mortality rate of the bomb survivors more accurate than the Relativ-Risk-Model. (orig.) [de

  5. COMPARISON OF DOUBLE AND SINGLE PIERCING PROCESS IN SEAMLESS STEEL TUBE MANUFACTURE

    OpenAIRE

    Chihiro, HAYASHI; Tomio, YAMAKAWA; Corporate Research and Development Laboratories, Sumitomo Metal Industries, Ltd.; Corporate Research and Development Laboratories, Sumitomo Metal Industries, Ltd.

    1997-01-01

    An investigation work was made on the influence of the piercing process on the rotary forging effects, redundant shear deformations and power consumption. In this work, a study was made to compare the double and single piercing process with reference to the Mannesmann piercing mill and the cone-type piercing mill developed by the authors. If the conventional double piercing process employing the Mannesmann piercing mill is replaced by the single piercing process employing the cone-type pierci...

  6. Dual boundary spanning

    DEFF Research Database (Denmark)

    Li-Ying, Jason

    2016-01-01

    The extant literature runs short in understanding openness of innovation regarding and the different pathways along which internal and external knowledge resources can be combined. This study proposes a unique typology for outside-in innovations based on two distinct ways of boundary spanning: wh...

  7. Life Span Developmental Approach

    Directory of Open Access Journals (Sweden)

    Ali Eryilmaz

    2011-03-01

    Full Text Available The Life Span Developmental Approach examines development of individuals which occurs from birth to death. Life span developmental approach is a multi-disciplinary approach related with disciplines like psychology, psychiatry, sociology, anthropology and geriatrics that indicates the fact that development is not completed in adulthood, it continues during the life course. Development is a complex process that consists of dying and death. This approach carefully investigates the development of individuals with respect to developmental stages. This developmental approach suggests that scientific disciplines should not explain developmental facts only with age changes. Along with aging, cognitive, biological, and socioemotional development throughout life should also be considered to provide a reasonable and acceptable context, guideposts, and reasonable expectations for the person. There are three important subjects whom life span developmental approach deals with. These are nature vs nurture, continuity vs discontinuity, and change vs stability. Researchers using life span developmental approach gather and produce knowledge on these three most important domains of individual development with their unique scientific methodology.

  8. Degradation of Epoxy-Steel Single Lap Joints Immersed in Water

    DEFF Research Database (Denmark)

    Goglio, L; Rezaei, Mohsen

    2015-01-01

    Exposure to environmental factors, especially moisture, is recognized as the major cause of degradation of adhesive joints. In this work, complementing a previous study on exposure to moisture, single lap joints were subjected to immersion in water, up to five weeks, at room temperature and 50 °C...

  9. Span efficiency in hawkmoths.

    Science.gov (United States)

    Henningsson, Per; Bomphrey, Richard J

    2013-07-06

    Flight in animals is the result of aerodynamic forces generated as flight muscles drive the wings through air. Aerial performance is therefore limited by the efficiency with which momentum is imparted to the air, a property that can be measured using modern techniques. We measured the induced flow fields around six hawkmoth species flying tethered in a wind tunnel to assess span efficiency, ei, and from these measurements, determined the morphological and kinematic characters that predict efficient flight. The species were selected to represent a range in wingspan from 40 to 110 mm (2.75 times) and in mass from 0.2 to 1.5 g (7.5 times) but they were similar in their overall shape and their ecology. From high spatio-temporal resolution quantitative wake images, we extracted time-resolved downwash distributions behind the hawkmoths, calculating instantaneous values of ei throughout the wingbeat cycle as well as multi-wingbeat averages. Span efficiency correlated positively with normalized lift and negatively with advance ratio. Average span efficiencies for the moths ranged from 0.31 to 0.60 showing that the standard generic value of 0.83 used in previous studies of animal flight is not a suitable approximation of aerodynamic performance in insects.

  10. Signal enhancement with variable span linear filters

    CERN Document Server

    Benesty, Jacob; Jensen, Jesper R

    2016-01-01

    This book introduces readers to the novel concept of variable span speech enhancement filters, and demonstrates how it can be used for effective noise reduction in various ways. Further, the book provides the accompanying Matlab code, allowing readers to easily implement the main ideas discussed. Variable span filters combine the ideas of optimal linear filters with those of subspace methods, as they involve the joint diagonalization of the correlation matrices of the desired signal and the noise. The book shows how some well-known filter designs, e.g. the minimum distortion, maximum signal-to-noise ratio, Wiener, and tradeoff filters (including their new generalizations) can be obtained using the variable span filter framework. It then illustrates how the variable span filters can be applied in various contexts, namely in single-channel STFT-based enhancement, in multichannel enhancement in both the time and STFT domains, and, lastly, in time-domain binaural enhancement. In these contexts, the properties of ...

  11. Signal Enhancement with Variable Span Linear Filters

    DEFF Research Database (Denmark)

    Benesty, Jacob; Christensen, Mads Græsbøll; Jensen, Jesper Rindom

    This book introduces readers to the novel concept of variable span speech enhancement filters, and demonstrates how it can be used for effective noise reduction in various ways. Further, the book provides the accompanying Matlab code, allowing readers to easily implement the main ideas discussed....... Variable span filters combine the ideas of optimal linear filters with those of subspace methods, as they involve the joint diagonalization of the correlation matrices of the desired signal and the noise. The book shows how some well-known filter designs, e.g. the minimum distortion, maximum signal......-to-noise ratio, Wiener, and tradeoff filters (including their new generalizations) can be obtained using the variable span filter framework. It then illustrates how the variable span filters can be applied in various contexts, namely in single-channel STFT-based enhancement, in multichannel enhancement in both...

  12. Summary Report of Summer Work: High Purity Single Crystal Growth & Microstructure of Ferritic-Martensitic Steels

    Energy Technology Data Exchange (ETDEWEB)

    Pestovich, Kimberly Shay [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-18

    Harnessing the power of the nuclear sciences for national security and to benefit others is one of Los Alamos National Laboratory’s missions. MST-8 focuses on manipulating and studying how the structure, processing, properties, and performance of materials interact at the atomic level under nuclear conditions. Within this group, single crystal scintillators contribute to the safety and reliability of weapons, provide global security safeguards, and build on scientific principles that carry over to medical fields for cancer detection. Improved cladding materials made of ferritic-martensitic alloys support the mission of DOE-NE’s Fuel Cycle Research and Development program to close the nuclear fuel cycle, aiming to solve nuclear waste management challenges and thereby increase the performance and safety of current and future reactors.

  13. High Power Fiber Laser Welding of Single Sided T-Joint on Shipbuilding Steel with Different Processing Setups

    Directory of Open Access Journals (Sweden)

    Anna Unt

    2017-12-01

    Full Text Available Laser welding of thick plates in production environments is one of the main applications of high power lasers; however, the process has certain limitations. The small spot size of the focused beam produces welds with high depth-to-width aspect ratio but at times fails to provide sufficient reinforcement in certain applications because of poor gap bridging ability. The results of welding shipbuilding steel AH36 with thickness of 8 mm as a single-sided T-joint using a 10 kW fiber laser are presented and discussed in this research paper. Three optical setups with process fibers of 200 µm, 300 µm and 600 µm core diameters were used to study the possibilities and limitations set by the beam delivery system. The main parameters studied were beam inclination angle, beam offset from the joint plane and focal point position. Full penetration joints were produced and the geometry of the welds was examined. It was found that process fibers with smaller core diameter produce deeper penetration but suffer from sensitivity to beam positioning deviation. Larger fibers are less sensitive and produce wider welds but have, in turn, lower penetration at equivalent power levels.

  14. Detection of radiation-induced changes in electrochemical properties of austenitic stainless steels using miniaturized specimens and the single-loop electrochemical potentiokinetic reactivation method

    International Nuclear Information System (INIS)

    Inazumi, T.; Bell, G.E.C.; Kenik, E.A.; Kiuchi, K.

    1993-01-01

    Single-loop electrochemical potentiokinetic reactivation testing of miniaturized (TEM) specimens can provide reliable data comparable to data obtained with larger specimens. Significant changes in electrochemical properties (increased reactivation current and Flade potential) were detected for PCA and type 316 stainless steels irradiated at 200--420 degrees C up to 7--9 dpa. Irradiations in the FFTF Materials Open Test Assembly and in the Oak Ridge Research Reactor are reported on. 45 figs., 5 tabs., 52 refs

  15. Evaluation of single crystal elastic constants and stacking fault energy in high-nitrogen duplex stainless steel by in-situ neutron diffraction

    International Nuclear Information System (INIS)

    Kim, Yanghoo; Kim, Yong Min; Koh, Ji-Yeon; Lee, Tae-Ho; Woo, Wan Chuck; Han, Heung Nam

    2016-01-01

    Single crystal elastic constants of austenite and ferrite phases in high-nitrogen duplex stainless steel were evaluated by an elastic self-consistent model combined with an optimization process using in-situ neutron diffraction data. The optimized elastic constants were validated by the indentation moduli of each phase obtained by nanoindentation. In addition, the stacking fault energy of austenite was evaluated based on the neutron diffraction profile and the single crystal elastic constants and was subsequently correlated with the observed deformation microstructure.

  16. Structural analysis of a composite continuous girder with a single rectangular web opening

    Directory of Open Access Journals (Sweden)

    Mohamed A. ElShaer

    2017-08-01

    In this paper, a non-linear finite element analysis has been done to analyze the deflection in the steel section and internal stresses in the concrete slab for continuous composite girders with a single rectangular opening in the steel web. ANSYS computer program (version 15 has been used to analyze the three-dimensional model. The reliability of the model was demonstrated by comparison with experimental results of continuous composite beams without an opening in the steel web carried out by another author. The parametric analysis was executed to investigate the width, height, and position of the opening in one span on the behavior of a composite girder under vertical load. The results indicated that when the width of opening is less than 0.05 of length of a single span and the height is less than 0.15 of the steel web, the deflection and internal stresses increased less than 10% comparing to continuous composite girders without an opening.

  17. Determining fracture-mechanics characteristics of reactor pressure vessel steels applying the single-specimen compliance method and correlations to notch impact energy

    International Nuclear Information System (INIS)

    Bergmann, U.; Boehmert, J.; Viehrig, H.W.

    1995-03-01

    Fracture-mechanics crack resistance parameters based on the J integral are useful to describe the failure behaviour of high-toughness reactor pressure vessel steels. This paper presents methodical results concerning the estimation of crack growth resistance curves of precracked and sidegrooved Charpy sized 3-PB specimens by using the single specimen compliance method. Crack initiation toughness values are estimated on the basis of the measured stretch zone with and as a technical equivalent values from the crack resistant curves described by a polynom. The wide range of toughness or strength of the investigated steels allows to investigate relationships known from the literature between the upper shelf Charpy-V notch energy and the crack growth resistance behaviour. The relationships provide acceptable technical approaches, but they can only insufficiently describe the physical meaning. (orig.) [de

  18. Evaluation of single tracks of 17-4PH steel manufactured at different power densities and scanning speeds by selective laser melting

    Directory of Open Access Journals (Sweden)

    Makoana, N. W.

    2016-11-01

    Full Text Available In Selective Laser Melting, the initial units produced are single tracks that overlap to create a single layer; from the sequence of layers, a 3D object is manufactured. The properties of the parts produced by SLM depend heavily on the properties of each single track and each layer formed by these tracks. This study evaluates the effect of processing parameters on the geometrical characteristics of single tracks manufactured from 17-4PH stainless steel powder. A single-mode continuous-wave ytterbium fibre laser was used to manufacture single tracks at laser powers in the range of 100-300 W with a constant spot size of ∼80μm. The single tracks produced were subjected to standard metallographic preparation techniques for further analysis with an optical microscope. Deep molten pool shapes were observed at low scan speeds, while shallow molten pool shapes were observed at high scan speeds. At higher laser power densities, under-cutting and humping effects were also observed. The dimensions of single tracks processed without powder generally decrease with increasing scan speed at constant laser power. However, the geometrical features of the single tracks processed with powder revealed pronounced irregularities believed to be caused by non-homogeneity in the deposited powder layer.

  19. Long Span Bridges in Scandinavia

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The first Scandinavian bridge with a span of more than 500 m was the Lillebælt Suspension Bridge opened to traffic in 1970.Art the end of the 20th century the longest span of any European bridge is found in the Storebælt East Bridge with a main span of 1624 m. Also the third longest span in Europe...... is found in Scandinavia - the 1210 m span of the Höga Kusten Bridge in Sweden.The Kvarnsund Bridge in Norway was at the completion in 1991 the longest cable-stayed bridge in the world, and the span of 530 m is still thge longest for cable-stayed bridges in concrete. The Øresund Bridge with its sapn of 490...... m is the longest among cable-stayed bridges for both road and railway traffic....

  20. Visual-Attentional Span and Lexical ­Decision in Skilled Adult Readers

    Science.gov (United States)

    Holmes, Virginia M.; Dawson, Georgia

    2014-01-01

    The goal of the study was to examine the association between visual-attentional span and lexical decision in skilled adult readers. In the span tasks, an array of letters was presented briefly and recognition or production of a single cued letter (partial span) or production of all letters (whole span) was required. Independently of letter…

  1. Chain-Constrained Spanning Trees

    NARCIS (Netherlands)

    Olver, N.K.; Zenklusen, R.

    2013-01-01

    We consider the problem of finding a spanning tree satisfying a family of additional constraints. Several settings have been considered previously, the most famous being the problem of finding a spanning tree with degree constraints. Since the problem is hard, the goal is typically to find a

  2. Crack-speed relations inferred from large single-edge notched specimens of a 533 B steel

    International Nuclear Information System (INIS)

    Schwartz, C.W.

    1994-07-01

    A relationship between instantaneous crack-tip velocity a, dynamic stress-intensity factor K I , and temperature T for A 533 B steel is estimated using dynamic crack position us time data measured in a series of very large-scale crack-arrest tests. The corresponding dynamic stress intensity us time history and the dynamic-arrest toughness for each test are obtained from generation-mode elastodynamic analyses based on cubic polynomial fits to elastodynamic analytical predictions based on the proposed a-K I -T relation are within 7% of experimentally measured arrested crack lengths and within 50% of measured arrest times. These predictions within 50% of measured arrest times. These predictions represent significant improvements over results obtained using previous preliminary estimates of the a-K I -T relation for A 533 B steel. The influence of nonlinear material behavior on the results is also evaluated

  3. Comparison between 4.0-mm stainless steel and 4.75-mm titanium alloy single-rod spinal instrumentation for anterior thoracoscopic scoliosis surgery.

    Science.gov (United States)

    Yoon, Seung Hwan; Ugrinow, Valerie L; Upasani, Vidyadhar V; Pawelek, Jeff B; Newton, Peter O

    2008-09-15

    Retrospective review of a consecutive, single surgeon case series. To compare minimum 2-year postoperative outcomes between 4.0-mm stainless steel and 4.75-mm titanium alloy single-rod anterior thoracoscopic instrumentation for the treatment of thoracic idiopathic scoliosis. Advances in anterior thoracoscopic spinal instrumentation for scoliosis have attempted to mitigate the postoperative complications of rod failure, pseudarthrosis, and deformity progression. Biomechanical data suggest that the 4.75-mm titanium construct has a lower risk of fatigue failure compared to the 4.0-mm stainless steel construct. Sixty-four consecutive anterior thoracoscopic spinal instrumentation cases in patients with thoracic scoliosis performed by a single surgeon and with minimum 2-year follow-up were retrospectively reviewed. The first 34 cases used a 4.0-mm stainless steel (SS) construct, whereas the subsequent 30 cases used a 4.75-mm titanium (Ti) alloy instrumentation system. The first 10 SS cases and the first 5 Ti cases were excluded from the statistical comparison to account for a potential learning curve effect. A multivariate analysis of variance (P 0.13). The average follow-up in the SS group was, however, significantly longer than in the Ti group (4.0 +/- 1.4 years vs. 2.3 +/- 1.0 years; P = 0.001). Preop main thoracic Cobb angles were similar between the 2 groups (P = 0.62); however, the 2-year main thoracic Cobb was significantly smaller (P = 0.03) and the 2-year percent correction was significantly greater in the Ti group (P = 0.03). Five patients (21%) in the SS group had a pseudarthrosis, 3 (13%) experienced rod failure, and 2 (8%) required a revision posterior spinal fusion. In the Ti group, 2 patients (8%) had a pseudarthrosis, and no patient experienced rod failure or required a revision procedure. Although the average follow-up in the Ti group was significantly shorter than in the SS group, the 4.75-mm titanium alloy construct resulted in improved maintenance of

  4. Spanning Tree Based Attribute Clustering

    DEFF Research Database (Denmark)

    Zeng, Yifeng; Jorge, Cordero Hernandez

    2009-01-01

    inconsistent edges from a maximum spanning tree by starting appropriate initial modes, therefore generating stable clusters. It discovers sound clusters through simple graph operations and achieves significant computational savings. We compare the Star Discovery algorithm against earlier attribute clustering...

  5. Thermodynamics and life span estimation

    International Nuclear Information System (INIS)

    Kuddusi, Lütfullah

    2015-01-01

    In this study, the life span of people living in seven regions of Turkey is estimated by applying the first and second laws of thermodynamics to the human body. The people living in different regions of Turkey have different food habits. The first and second laws of thermodynamics are used to calculate the entropy generation rate per unit mass of a human due to the food habits. The lifetime entropy generation per unit mass of a human was previously found statistically. The two entropy generations, lifetime entropy generation and entropy generation rate, enable one to determine the life span of people living in seven regions of Turkey with different food habits. In order to estimate the life span, some statistics of Turkish Statistical Institute regarding the food habits of the people living in seven regions of Turkey are used. The life spans of people that live in Central Anatolia and Eastern Anatolia regions are the longest and shortest, respectively. Generally, the following inequality regarding the life span of people living in seven regions of Turkey is found: Eastern Anatolia < Southeast Anatolia < Black Sea < Mediterranean < Marmara < Aegean < Central Anatolia. - Highlights: • The first and second laws of thermodynamics are applied to the human body. • The entropy generation of a human due to his food habits is determined. • The life span of Turks is estimated by using the entropy generation method. • Food habits of a human have effect on his life span

  6. A Distributed Spanning Tree Algorithm

    DEFF Research Database (Denmark)

    Johansen, Karl Erik; Jørgensen, Ulla Lundin; Nielsen, Sven Hauge

    We present a distributed algorithm for constructing a spanning tree for connected undirected graphs. Nodes correspond to processors and edges correspond to two-way channels. Each processor has initially a distinct identity and all processors perform the same algorithm. Computation as well...... as communication is asynchronous. The total number of messages sent during a construction of a spanning tree is at most 2E+3NlogN. The maximal message size is loglogN+log(maxid)+3, where maxid is the maximal processor identity....

  7. A distributed spanning tree algorithm

    DEFF Research Database (Denmark)

    Johansen, Karl Erik; Jørgensen, Ulla Lundin; Nielsen, Svend Hauge

    1988-01-01

    We present a distributed algorithm for constructing a spanning tree for connected undirected graphs. Nodes correspond to processors and edges correspond to two way channels. Each processor has initially a distinct identity and all processors perform the same algorithm. Computation as well...... as communication is asyncronous. The total number of messages sent during a construction of a spanning tree is at most 2E+3NlogN. The maximal message size is loglogN+log(maxid)+3, where maxid is the maximal processor identity....

  8. The optimum spanning catenary cable

    Science.gov (United States)

    Wang, C. Y.

    2015-03-01

    A heavy cable spans two points in space. There exists an optimum cable length such that the maximum tension is minimized. If the two end points are at the same level, the optimum length is 1.258 times the distance between the ends. The optimum lengths for end points of different heights are also found.

  9. Spanning quadrangulations of triangulated surfaces

    DEFF Research Database (Denmark)

    Kündgen, André; Thomassen, Carsten

    2017-01-01

    In this paper we study alternating cycles in graphs embedded in a surface. We observe that 4-vertex-colorability of a triangulation on a surface can be expressed in terms of spanninq quadrangulations, and we establish connections between spanning quadrangulations and cycles in the dual graph whic...

  10. Synergistic effects on dislocation loops in reduced-activation martensitic steel investigated by single and sequential hydrogen/helium ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Weiping [Hubei Nuclear Solid Physics Key Laboratory, Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Luo, Fengfeng [Hubei Nuclear Solid Physics Key Laboratory, Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Institute of Applied Physics, Jiangxi Academy of Sciences, Nanchang 330029 (China); Yu, Yanxia; Zheng, Zhongcheng; Shen, Zhenyu [Hubei Nuclear Solid Physics Key Laboratory, Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Guo, Liping, E-mail: guolp@whu.edu.cn [Hubei Nuclear Solid Physics Key Laboratory, Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Ren, Yaoyao [Center for Electron Microscopy, Wuhan University, Wuhan 430072 (China); Suo, Jinping [State Key Laboratory of Mould Technology, Institute of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2016-10-15

    Single-beam and sequential-beam irradiations were performed to investigate the H/He synergistic effect on dislocation loops in reduced-activation ferritic/martensitic (RAFM) steels. The irradiations were carried out with 10 keV H{sup +}, 18 keV He{sup +} and 160 keV Ar{sup +}, alone and in combination at 723 K. He{sup +} single-beam irradiation induced much larger dislocation loops than that induced by both H{sup +} and Ar{sup +} single-beam irradiation. H{sup +} post-irradiation after He{sup +} irradiation further increased the size of dislocation loops, whilst He{sup +} post-irradiation or Ar{sup +} post-irradiation following H{sup +} irradiation only slightly increased the size of dislocation loops. The experiment results indicate that pre-implanted H{sup +} can drastically inhibit the growth while post-implanted H{sup +} can significantly enhance the growth of dislocation loops induced by He{sup +} irradiation. The mechanisms behind the complex synergistic phenomena between H and He and the different roles that H and He played in the growth of dislocation loops are discussed.

  11. Steel-soil composite bridge

    DEFF Research Database (Denmark)

    Du, Guangli; Pettersson, Lars; Karoumi, Raid

    2017-01-01

    viability, while their environmental performance is overlooked. Today’s designers are urged to seek new design options to reduce the environmental burdens. Sweden owns more than 24574 bridges and most of them are short spans. Among them, the slab frame bridge (CFB) is a common solution. Soil steel composite...

  12. Effect of Abrasive Waterjet Peening Surface Treatment of Steel Plates on the Strength of Single-Lap Adhesive Joints

    Directory of Open Access Journals (Sweden)

    Kamil Anasiewicz

    2017-09-01

    Full Text Available The paper presents results of comparative study of shear strength of single–lap adhesive joints, depending on the method of surface preparation of steel plates with increased corrosion resistance. The method of preparing adherend surfaces is often one of the most important factors determining the strength of adhesive joints. Appropriate geometric surface development and cleaning of the surface enhances adhesion forces between adherend material and adhesive. One of the methods of shaping engineering materials is waterjet cutting, which in the AWJP – abrasive waterjet peening variant, serves to shape flat surfaces of the material by changing the roughness and introducing stresses into the surface layer. These changes are valuable when preparing adhesive joints. In the study, surface roughness parameters obtained with AWJP treatment, were analyzed in direct relation to the strength of the adhesive joint. As a consequence of the experimental results analysis, the increase in the strength of the adhesive joints was observed in a certain range of parameters used for AWJP treatment. A decrease in shear strength of adhesive joint with the most modified topography of overlap surface was observed.

  13. Free vibrations of a multi-span Timoshenko beam carrying multiple ...

    Indian Academy of Sciences (India)

    The literature regarding the free vibration analysis of Bernoulli–Euler single-span beams carrying a number of spring-mass system and Bernoulli–Euler multi-span beams carrying multiple spring-mass systems are plenty, but on Timoshenko multi-span beams carrying multiple spring-mass systems is fewer. This paper aims ...

  14. Initiation and growth of a single pit on 316L stainless steel: Influence of SO42- and ClO4- anions

    International Nuclear Information System (INIS)

    Aouina, N.; Huet, F.; Joiret, S.; Perrot, H.; Vivier, V.; Balbaud-Celerier, F.; Rouillard, F.

    2013-01-01

    In this paper, an ion micro dispenser (IMD) was used to initiate a single pit by generating chloride anions above a 316L stainless steel electrode in either H 2 SO 4 or HClO 4 electrolyte. The current variations with respect to time provided an unambiguous characterization of the single pit evolution. Different pit shapes were observed depending on both the nature of the electrolyte and potential applied to the electrode. Substituting SO 4 2- for ClO 4 - gave smaller (in diameter) but deeper pits at the early stage of pitting. However, when using a different setup that allows the sustaining of the pit propagation with a continuous supply of Cl - , the deeper pits were observed in HClO 4 rather than H 2 SO 4 . The formation of an iron sulphate salt film at the bottom of the pit by precipitation of dissolution products in H 2 SO 4 slowed down the corrosion rate. At high potentials, the repassivation mechanism outweighed the metal dissolution in the ClO 4 - containing solution. (authors)

  15. NET TG1: Residual stress assessment by neutron diffraction and finite element modeling on a single bead weld on a steel plate

    International Nuclear Information System (INIS)

    Ohms, C.; Wimpory, R.C.; Katsareas, D.E.; Youtsos, A.G.

    2009-01-01

    In the context of the efforts of Task Group 1 (TG1) of the European Network on Neutron Techniques Standardization for Structural Integrity (NET), the Joint Research Centre (JRC) participated in the experimental round robin campaign for residual stress analysis on a single weld bead on a steel plate. In parallel, the University of Patras (UP), in collaboration with the JRC, contributed to the corresponding numerical analysis round robin exercise. Neutron diffraction measurements were performed on a specimen, designated as A12, using the residual stress diffractometer at beam tube HB5 at the High Flux Reactor (HFR) in Petten, The Netherlands. Several line scans of strains and stresses were performed in accordance with an experimental protocol devised for this exercise and their results are presented in this paper. Two scans were made along the weld longitudinal direction beneath the upper surface of the plate, three were made in the weld transverse direction, and three through the thickness of the plate. The measured residual stresses are presented in detail. The measurements confirm that the stress distribution around this single weld bead on a plate is intrinsically 3-dimensional. The procedure followed by UP in the numerical assessment of the problem is presented in detail. The numerical results are presented in direct comparison to the JRC measurement data

  16. Life span of animals under acute and chronic irradiation

    International Nuclear Information System (INIS)

    Zapol'skaya, N.A.; Fedorova, A.V.; Borisova, V.V.

    1978-01-01

    The study has been designed to see to what extent a single and long-term external and internal irradiations shorten the life span of animals. LDsub(50/30) for certain radionuclides whose absorbed doses show different spatiotemporal distributions are considered. It has been found that as far as the average life span is concerned, 137 Cs and 90 Sr have approximately the same effect whether they enter the body on a single occasion or repeatedly. With chronic total-body external gamma-irradiation, the decrease in life span is 5 times smaller than than with single-occasion irradiation. The main reason for the observed differences are found to be differences in the rates with which the absorbed doses are formed

  17. Steel making

    CERN Document Server

    Chakrabarti, A K

    2014-01-01

    "Steel Making" is designed to give students a strong grounding in the theory and state-of-the-art practice of production of steels. This book is primarily focused to meet the needs of undergraduate metallurgical students and candidates for associate membership examinations of professional bodies (AMIIM, AMIE). Besides, for all engineering professionals working in steel plants who need to understand the basic principles of steel making, the text provides a sound introduction to the subject.Beginning with a brief introduction to the historical perspective and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to: elaborate the physiochemical principles involved in steel making; explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric furnace process); provide a summary of the developments in secondary refining of steels; discuss principles a...

  18. Evaluating the life cycle environmental impact of short span bridges

    DEFF Research Database (Denmark)

    Du, Guangli; Pettersson, Lars; Karoumi, Raid

    2016-01-01

    Bridge infrastructure consumes large amount of energy and raw materials, leading to considerable environmental burdens. The traditional infrastructure construction prioritizes its technical and economic viability. In recent years, the society devotes an ever-increased attention to the environmental...... impact of the construction sector. Life cycle assessment (LCA) is a systematic method for assessing the environmental impact of products and systems, but its application in bridges is scarce. In Swede, most of the bridges are short spans and the type of concrete slab-frame bridge (CFB) accounts...... for a large share. Soil steel composite bridge (SSCB) is a functional equivalent solution for CFB. In order to mitigate the environmental burdens of short span bridges, this paper performed a comparative LCA study between these two types of bridge. The results indicate that the initial material consumption...

  19. INVESTIGATING DURABILITY TIME INTERVAL OF THREE-DIMENSIONAL STEEL FRAME WITH ANGLE CONNECTIONS UNDER ELEVATED TEMPRATURE

    Directory of Open Access Journals (Sweden)

    Hossain Rad

    2016-03-01

    Full Text Available During recent years, much attention has been paid to the analysis of fire effect on steel structures because of fire importance and its effect on the stability of steel structures. Considering steel sensitivity to heat and high costs of steel frames retrofitting with the help of thermal covers, accurate behavior analysis of metal frames in elevated temperatures is required in order to reduce undesirable effects of temperature increase. To do so and taking into account the high costs of lab tests and their limitations in investigation of numerous parameters during any test, finite element method is used as a powerful and valuable tool in modeling of steel frames under thermal conditions. In this study, the fire effect on steel beams is studied considering the softening of connection and decrease of materials strength. Then, structure durability in fire will be analyzed in the ANSYS software. The analyzed frame is a single span three dimensional one and different conditions including connection type, longitudinal expansion effect, thermal loading and the kind of fire will be analyzed and compared. The obtained computer results will be compared with other researches results.

  20. Working Memory Deficits in Children with Reading Difficulties: Memory Span and Dual Task Coordination

    Science.gov (United States)

    Wang, Shinmin; Gathercole, Susan E.

    2013-01-01

    The current study investigated the cause of the reported problems in working memory in children with reading difficulties. Verbal and visuospatial simple and complex span tasks, and digit span and reaction times tasks performed singly and in combination, were administered to 46 children with single word reading difficulties and 45 typically…

  1. Determinantal spanning forests on planar graphs

    OpenAIRE

    Kenyon, Richard

    2017-01-01

    We generalize the uniform spanning tree to construct a family of determinantal measures on essential spanning forests on periodic planar graphs in which every component tree is bi-infinite. Like the uniform spanning tree, these measures arise naturally from the laplacian on the graph. More generally these results hold for the "massive" laplacian determinant which counts rooted spanning forests with weight $M$ per finite component. These measures typically have a form of conformal invariance, ...

  2. Computational Investigation of a Semi-Span Flap

    Science.gov (United States)

    Mathias, Donovan, L.; Roth, Karlin R.; Ross, James C.; Rogers, Stuart E.; Cummings, Russell M.; Olson, Lawrence E. (Technical Monitor)

    1995-01-01

    The current study computationally examines one of the principle three-dimensional features of the flow over a high-lift system, the flow associated with a flap edge. Structured, overset grids were used in conjunction with an incompressible Navier-Stokes solver to compute the flow over a two-element high-lift configuration. The computations were run in a fully turbulent mode using the one-equation Baldwin-Barth model. Specific interest was given to the details of the flow in the vicinity of the flap edge, so the geometry was simplified to isolate this region. The geometry consisted of an unswept wing, which spanned a wind tunnel test section, equipped with a single element flap. Two flap configurations were computed; a full-span and a half-span Fowler flap. The chord based Reynolds number was 3.7 million for all cases. The results for the full-span flap agreed with two-dimensional experimental results and verified the method. Grid topologies and related issues for the half-span flap geometry are discussed. Results of the half-span flap case are presented with emphasis on the flow features associated with the flap edge.

  3. Slow fusion of liposomes composed of membrane-spanning lipids

    NARCIS (Netherlands)

    Elferink, MGL; vanBreemen, J; Konings, WN; Driessen, AJM; Wilschut, J; Elferink, Marieke G.L.

    1997-01-01

    The fusion characteristics of large unilamellar liposomes composed of bipolar tetraether lipids extracted from the thermophilic archaeon Sulfolobus acidocaldarius, was investigated. These lipids span the entire membrane and form single monolayer liposomes in aqueous media [Elferink, M.G.L., de Wit,

  4. Fracture Mechanisms in Steel Castings

    Directory of Open Access Journals (Sweden)

    Stradomski Z.

    2013-09-01

    Full Text Available The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidified grains. Also the brittle phosphor and carbide eutectics precipitated in the final stage solidification are responsible for cracking of castings made of Hadfield steel. The examination of mechanical properties at 1050°C revealed low or very low strength of high-carbon cast steels.

  5. Extended attention span training system

    Science.gov (United States)

    Pope, Alan T.; Bogart, Edward H.

    1991-01-01

    Attention Deficit Disorder (ADD) is a behavioral disorder characterized by the inability to sustain attention long enough to perform activities such as schoolwork or organized play. Treatments for this disorder include medication and brainwave biofeedback training. Brainwave biofeedback training systems feed back information to the trainee showing him how well he is producing the brainwave pattern that indicates attention. The Extended Attention Span Training (EAST) system takes the concept a step further by making a video game more difficult as the player's brainwaves indicate that attention is waning. The trainee can succeed at the game only by maintaining an adequate level of attention. The EAST system is a modification of a biocybernetic system that is currently being used to assess the extent to which automated flight management systems maintain pilot engagement. This biocybernetic system is a product of a program aimed at developing methods to evaluate automated flight deck designs for compatibility with human capabilities. The EAST technology can make a contribution in the fields of medical neuropsychology and neurology, where the emphasis is on cautious, conservative treatment of youngsters with attention disorders.

  6. Dependency of single-phase FAC of carbon and low-alloy steels for NPP system piping on pH, orifice distance and material

    International Nuclear Information System (INIS)

    Moon, Jeong Ho; Chung, Hung Ho; Sung, Ki Woung; Kim, Uh Chul; Rho, Jae Seong

    2005-01-01

    To investigate the Flow-Accelerated Corrosion (FAC) dependency of carbon steel (A106 Gr. B) and low-alloy steels (1Cr-1/2Mo, 2 1/4Cr-1Mo) on pH, orifice distance, and material, experiments were carried out. These experiments were performed using a flow velocity of 4 m/sec (partly 9 m/sec) at pH 8.0∼10.0 in an oxygen-free aqueous solution re-circulated in an Erosion-Corrosion Test Loop at 130 .deg. ... for 500 hours. The weight loss of the carbon steel specimens appeared to be positively dependent on the flow velocity. That of the carbon and low-alloy steel specimens also showed to be distinguishably dependent on the pH. At pH levels of 8.0∼9.5 it decreased, but increased from 9.5 to 10.0. Utility water chemistry personnel should carefully consider this kind of pH dependency to control the water system pH to mitigate FAC of the piping system material. The weight loss of the specimens located further from the orifice in the distance range of 6.8∼27.2 mm was shown to be greater, except for 2 1/4Cr-1Mo, which showed no orifice distance dependency. Low alloy steel specimens exhibited a factor of two times better resistance to FAC than that of the carbon steel. Based on this kind of FAC dependency of the carbon and low-alloy steels on the orifice distance and material, we conclude that it is necessary to alternate the composition of the secondary piping system material of NPPs, using low-alloy steels, such as 2 1/4Cr-1Mo, particularly when the system piping has to be replaced

  7. Coated 4340 Steel

    Science.gov (United States)

    2013-08-26

    NAWCADPAX/TR-2013/252 4 MECHANICAL TEST Single edge notched, square-bar ( Charpy ) specimens, bare or coated, were tested under four-point bending at...Treated 4340 Steel Tested in Air NAWCADPAX/TR-2013/252 APPENDIX 100 150 200 250 300 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08 M ax . S tr es s ( ks i...Fatigue Life, N (cycle) Bare No. 1 ST No. 3 ST Figure 10: Stress-Life Fatigue Curves for Bare and Surface-Treated 4340 Steel Tested in 3.5% NaCl

  8. Solid-state flow, mechanical alloying, and melt-related phenomena for [001] single-crystal tungsten ballistic rod penetrators interacting with steel targets

    Science.gov (United States)

    Pizana, Carlos

    This research program consists of a detailed microstructural investigation of in-target, single-crystal [001], clad (with Inconel 718) and unclad, W long-rod, ballistic penetrators. The rods were shot into rolled homogeneous armor (RHA) steel targets approximately 76 mm in thickness at impact velocities ranging from 1100 m/s to 1350 m/s. A comprehensive microstructural overview of the penetration process was obtained from this investigation. Solid-state flow/erosion, solid-state target/rod mixing as well as influencing factors such as strain rate, penetration performance, cladding interference and the interaction between target and projectile were emphasized. Some of the microstructural features observed, including deformation twins, cleaving, adiabatic shear bands and DRX support an overall solid-state penetration process. Furthermore they provide for a unifying perspective for the applicability of the hydrodynamic paradigm (DOP ≈ l∘rp/rt ) and earlier mechanistic erosion approaches. DRX and grain growth within adiabatic shear bands observed at specific high strain/strain-rate zones within the rods suggest that the projectile erodes by means of these microstructures in a solid-state form. This erosion process contributes to the performance of the rod by either allowing optimum flow of rod material which would increase penetration depth, or by maximizing rod material consumption which would reduce it. Since flow and/or erosion are also necessary in the target for perforation to occur, it is not surprising that the erosion process in the target was observed to mirror the one in the projectile. That is both target and projectile developed erosion zones with DRX facilitating the extreme deformation via dense overlapping shear band formation. Mechanical alloying and/or mixing of the target (steel) and rod (W, or W-Inconel 718) was also observed and investigated. Selective etching techniques as well as energy-dispersive x-ray mapping revealed unambiguous evidence of

  9. Spanning forests and the vector bundle Laplacian

    OpenAIRE

    Kenyon, Richard

    2011-01-01

    The classical matrix-tree theorem relates the determinant of the combinatorial Laplacian on a graph to the number of spanning trees. We generalize this result to Laplacians on one- and two-dimensional vector bundles, giving a combinatorial interpretation of their determinants in terms of so-called cycle rooted spanning forests (CRSFs). We construct natural measures on CRSFs for which the edges form a determinantal process. ¶ This theory gives a natural generalization of the spanning tre...

  10. Interaction model of steel ladle of continuous caster in steel works

    OpenAIRE

    Huang Bang Fu; Ma Zhi Wei; Tian Nai Yuan; Shi Zhe; Zhou Xiao Lei; Cai Jun

    2016-01-01

    For further research on the precondition and interoperability model of interaction ladles among continuous caster, this article takes steel ladle of Y steel works as the object of research. On the basis of turnover number calculation model of single cast steel ladle, the relationship between cast number and the turnover number and turnover times and last turnover number are further analyzed. The simulation of steel ladle turnover rules was taken on the 2 continuous casters with Gantt chart. A...

  11. Moment-Rotation Relationship for Unified Auto-Stress Design of Continuous-Span Bridge Beam and Girders

    OpenAIRE

    White, Donald W.; Ramirez, J. A.; Barth, Karl E.

    1997-01-01

    This report summarizes the development and trial application of simplified moment-rotation relationships for inelastic design of continuous-span beam and girder bridges. The research described within involves the execution of a reasonably comprehensive set of finite element parametric studies to fill in knowledge gaps in the available experimental data pertaining to the hogging moment-plastic rotation behavior of steel and composite steel-concrete bridge girders. Based on these studies, relat...

  12. Tool steels

    DEFF Research Database (Denmark)

    Højerslev, C.

    2001-01-01

    On designing a tool steel, its composition and heat treatment parameters are chosen to provide a hardened and tempered martensitic matrix in which carbides are evenly distributed. In this condition the matrix has an optimum combination of hardness andtoughness, the primary carbides provide...... resistance against abrasive wear and secondary carbides (if any) increase the resistance against plastic deformation. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenumand chromium) furthermore some steel types contains cobalt. Addition of alloying elements...... serves primarily two purpose (i) to improve the hardenabillity and (ii) to provide harder and thermally more stable carbides than cementite. Assuming proper heattreatment, the properties of a tool steel depends on the which alloying elements are added and their respective concentrations....

  13. Global Processing Speed as a Mediator of Developmental Changes in Children's Auditory Memory Span

    Science.gov (United States)

    Ferguson, A.N.; Bowey, J.A.

    2005-01-01

    This study examined the role of global processing speed in mediating age increases in auditory memory span in 5- to 13-year-olds. Children were tested on measures of memory span, processing speed, single-word speech rate, phonological sensitivity, and vocabulary. Structural equation modeling supported a model in which age-associated increases in…

  14. 77 FR 64545 - Drawn Stainless Steel Sinks From China

    Science.gov (United States)

    2012-10-22

    ... merchandise as ``drawn stainless steel sinks with single or multiple drawn bowls, with or without drain boards... finishing the vertical corners to form the bowls. Stainless steel sinks with fabricated bowls may sometimes...

  15. Relationships between Categorical Perception of Phonemes, Phoneme Awareness, and Visual Attention Span in Developmental Dyslexia

    Science.gov (United States)

    Zoubrinetzky, Rachel; Collet, Gregory; Serniclaes, Willy; Nguyen-Morel, Marie-Ange; Valdois, Sylviane

    2016-01-01

    We tested the hypothesis that the categorical perception deficit of speech sounds in developmental dyslexia is related to phoneme awareness skills, whereas a visual attention (VA) span deficit constitutes an independent deficit. Phoneme awareness tasks, VA span tasks and categorical perception tasks of phoneme identification and discrimination using a d/t voicing continuum were administered to 63 dyslexic children and 63 control children matched on chronological age. Results showed significant differences in categorical perception between the dyslexic and control children. Significant correlations were found between categorical perception skills, phoneme awareness and reading. Although VA span correlated with reading, no significant correlations were found between either categorical perception or phoneme awareness and VA span. Mediation analyses performed on the whole dyslexic sample suggested that the effect of categorical perception on reading might be mediated by phoneme awareness. This relationship was independent of the participants’ VA span abilities. Two groups of dyslexic children with a single phoneme awareness or a single VA span deficit were then identified. The phonologically impaired group showed lower categorical perception skills than the control group but categorical perception was similar in the VA span impaired dyslexic and control children. The overall findings suggest that the link between categorical perception, phoneme awareness and reading is independent from VA span skills. These findings provide new insights on the heterogeneity of developmental dyslexia. They suggest that phonological processes and VA span independently affect reading acquisition. PMID:26950210

  16. Relationships between Categorical Perception of Phonemes, Phoneme Awareness, and Visual Attention Span in Developmental Dyslexia.

    Science.gov (United States)

    Zoubrinetzky, Rachel; Collet, Gregory; Serniclaes, Willy; Nguyen-Morel, Marie-Ange; Valdois, Sylviane

    2016-01-01

    We tested the hypothesis that the categorical perception deficit of speech sounds in developmental dyslexia is related to phoneme awareness skills, whereas a visual attention (VA) span deficit constitutes an independent deficit. Phoneme awareness tasks, VA span tasks and categorical perception tasks of phoneme identification and discrimination using a d/t voicing continuum were administered to 63 dyslexic children and 63 control children matched on chronological age. Results showed significant differences in categorical perception between the dyslexic and control children. Significant correlations were found between categorical perception skills, phoneme awareness and reading. Although VA span correlated with reading, no significant correlations were found between either categorical perception or phoneme awareness and VA span. Mediation analyses performed on the whole dyslexic sample suggested that the effect of categorical perception on reading might be mediated by phoneme awareness. This relationship was independent of the participants' VA span abilities. Two groups of dyslexic children with a single phoneme awareness or a single VA span deficit were then identified. The phonologically impaired group showed lower categorical perception skills than the control group but categorical perception was similar in the VA span impaired dyslexic and control children. The overall findings suggest that the link between categorical perception, phoneme awareness and reading is independent from VA span skills. These findings provide new insights on the heterogeneity of developmental dyslexia. They suggest that phonological processes and VA span independently affect reading acquisition.

  17. Seismic Assessment And Strengthening Of An Existing Steel Bridge In Portugal

    Directory of Open Access Journals (Sweden)

    Catarina Fernandes

    2009-07-01

    Full Text Available This article presents the seismic vulnerability assessment of the S. João de Loure bridge, in Portugal. The single span steel bridge has riveted joints, commonly affected by corrosion, which can lead to a significant stiffness reduction. With the objective of evaluating theinfluence of the joints stiffness in the structural response of the bridge, a structural model of the bridge was created, and natural frequencies, maximum axial forces and maximum stresses, and maximum mid-span deflection were analysed. Four possible element rupture scenarios where also studied. Two of them where proved to be a risk for the structural safety of the bridge. A commonly used strengthening solution intending to reduce the bridge’s mid-spandeflection with external pre-stressing cables was studied.

  18. Linking crowding, visual span, and reading.

    Science.gov (United States)

    He, Yingchen; Legge, Gordon E

    2017-09-01

    The visual span is hypothesized to be a sensory bottleneck on reading speed with crowding thought to be the major sensory factor limiting the size of the visual span. This proposed linkage between crowding, visual span, and reading speed is challenged by the finding that training to read crowded letters reduced crowding but did not improve reading speed (Chung, 2007). Here, we examined two properties of letter-recognition training that may influence the transfer to improved reading: the spatial arrangement of training stimuli and the presence of flankers. Three groups of nine young adults were trained with different configurations of letter stimuli at 10° in the lower visual field: a flanked-local group (flanked letters localized at one position), a flanked-distributed group (flanked letters distributed across different horizontal locations), and an isolated-distributed group (isolated and distributed letters). We found that distributed training, but not the presence of flankers, appears to be necessary for the training benefit to transfer to increased reading speed. Localized training may have biased attention to one specific, small area in the visual field, thereby failing to improve reading. We conclude that the visual span represents a sensory bottleneck on reading, but there may also be an attentional bottleneck. Reducing the impact of crowding can enlarge the visual span and can potentially facilitate reading, but not when adverse attentional bias is present. Our results clarify the association between crowding, visual span, and reading.

  19. London SPAN version 4 parameter file format

    International Nuclear Information System (INIS)

    2004-06-01

    Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised trading system. Powernext SA collaborates with the clearing organization LCH.Clearnet SA to secure and facilitate the transactions. The French Standard Portfolio Analysis of Risk (SPAN) is a system used by LCH.Clearnet to calculate the initial margins from and for its clearing members. SPAN is a computerized system which calculates the impact of several possible variations of rates and volatility on by-product portfolios. The initial margin call is equal to the maximum probable loss calculated by the system. This document contains details of the format of the London SPAN version 4 parameter file. This file contains all the parameters and risk arrays required to calculate SPAN margins. London SPAN Version 4 is an upgrade from Version 3, which is also known as LME SPAN. This document contains the full revised file specification, highlighting the changes from Version 3 to Version 4

  20. Aircraft Steels

    Science.gov (United States)

    2009-02-19

    70 mm (0.4 x 0.4 x 2.8 in.) in L orientation with a Charpy notch at the mid-length for SCC test under four-point bending (ASTM F 1624- 95) TESTS ...MAXIMUM STRESS INTENSITY, Kmax, IN HIGH STRENGTH STEELS For the fatigue test in 3.5% NaCl solution, the FCG per cycle, da/dN, is converted to the...NAWCADPAX/TR-2009/12 AIRCRAFT STEELS by E. U. Lee R. Taylor C. Lei H. C. Sanders 19 February 2009

  1. WildSpan: mining structured motifs from protein sequences

    Directory of Open Access Journals (Sweden)

    Chen Chien-Yu

    2011-03-01

    Full Text Available Abstract Background Automatic extraction of motifs from biological sequences is an important research problem in study of molecular biology. For proteins, it is desired to discover sequence motifs containing a large number of wildcard symbols, as the residues associated with functional sites are usually largely separated in sequences. Discovering such patterns is time-consuming because abundant combinations exist when long gaps (a gap consists of one or more successive wildcards are considered. Mining algorithms often employ constraints to narrow down the search space in order to increase efficiency. However, improper constraint models might degrade the sensitivity and specificity of the motifs discovered by computational methods. We previously proposed a new constraint model to handle large wildcard regions for discovering functional motifs of proteins. The patterns that satisfy the proposed constraint model are called W-patterns. A W-pattern is a structured motif that groups motif symbols into pattern blocks interleaved with large irregular gaps. Considering large gaps reflects the fact that functional residues are not always from a single region of protein sequences, and restricting motif symbols into clusters corresponds to the observation that short motifs are frequently present within protein families. To efficiently discover W-patterns for large-scale sequence annotation and function prediction, this paper first formally introduces the problem to solve and proposes an algorithm named WildSpan (sequential pattern mining across large wildcard regions that incorporates several pruning strategies to largely reduce the mining cost. Results WildSpan is shown to efficiently find W-patterns containing conserved residues that are far separated in sequences. We conducted experiments with two mining strategies, protein-based and family-based mining, to evaluate the usefulness of W-patterns and performance of WildSpan. The protein-based mining mode

  2. Developments and Prospects of Long-Span High-Speed Railway Bridge Technologies in China

    Directory of Open Access Journals (Sweden)

    Shunquan Qin

    2017-12-01

    Full Text Available With the rapid developments of the high-speed railway in China, a great number of long-span bridges have been constructed in order to cross rivers and gorges. At present, the longest main span of a constructed high-speed railway bridge is only 630 m. The main span of Hutong Yangtze River Bridge and of Wufengshan Yangtze River Bridge, which are under construction, will be much longer, at 1092 m each. In order to overcome the technical issues that originate from the extremely large dead loading and the relatively small structural stiffness of long-span high-speed railway bridges, many new technologies in bridge construction, design, materials, and so forth have been developed. This paper carefully reviews progress in the construction technologies of multi-function combined bridges in China, including combined highway and railway bridges and multi-track railway bridges. Innovations and practices regarding new types of bridge and composite bridge structures, such as bridges with three cable planes and three main trusses, inclined main trusses, slab-truss composite sections, and steel-concrete composite sections, are introduced. In addition, investigations into high-performance materials and integral fabrication and erection techniques for long-span railway bridges are summarized. At the end of the paper, prospects for the future development of long-span high-speed railway bridges are provided.

  3. Hegelian Steel

    DEFF Research Database (Denmark)

    Kjær, Poul F.

    2015-01-01

    . Developing a Hegelian inspired historical-sociological approach this paper however argues that national and transnational societies emerged simultaneously and in a co-evolutionary and mutually supportive fashion. In most European settings national societies did not become the central horizon of individuals...... of the European steel industry....

  4. Hegelian Steel

    DEFF Research Database (Denmark)

    Kjær, Poul F.

    2015-01-01

    Even in our globalized world the notion of national economies remain incredibly strong, just as a considerable part of the literature on transnational governance and globalization continue to rely on a zero-sum perspective concerning the relationship between the national and the transnational. De...... of the European steel industry....

  5. Controlling the spotlight of attention: visual span size and flexibility in schizophrenia.

    Science.gov (United States)

    Elahipanah, Ava; Christensen, Bruce K; Reingold, Eyal M

    2011-10-01

    The current study investigated the size and flexible control of visual span among patients with schizophrenia during visual search performance. Visual span is the region of the visual field from which one extracts information during a single eye fixation, and a larger visual span size is linked to more efficient search performance. Therefore, a reduced visual span may explain patients' impaired performance on search tasks. The gaze-contingent moving window paradigm was used to estimate the visual span size of patients and healthy participants while they performed two different search tasks. In addition, changes in visual span size were measured as a function of two manipulations of task difficulty: target-distractor similarity and stimulus familiarity. Patients with schizophrenia searched more slowly across both tasks and conditions. Patients also demonstrated smaller visual span sizes on the easier search condition in each task. Moreover, healthy controls' visual span size increased as target discriminability or distractor familiarity increased. This modulation of visual span size, however, was reduced or not observed among patients. The implications of the present findings, with regard to previously reported visual search deficits, and other functional and structural abnormalities associated with schizophrenia, are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Spanning organizational boundaries to manage creative processes:

    DEFF Research Database (Denmark)

    Andersen, Poul Houman; Kragh, Hanne; Lettl, Christopher

    2013-01-01

    In order to continue to be innovative in the current fast-paced and competitive environment, organizations are increasingly dependent on creative inputs developed outside their boundaries. The paper addresses the boundary spanning activities that managers undertake to a) select and mobilize...... creative talent, b) create shared identity, and c) combine and integrate knowledge in innovation projects involving external actors. We study boundary spanning activities in two creative projects in the LEGO group. One involves identifying and integrating deep, specialized knowledge, the other focuses...... on the use of external actors as a source of broad, not necessarily fully developed ideas. We find that the boundary spanning activities in these two projects differ in respect, among other things, of how the firm selects participants, formulates problems, and aligns the expectations of internal and external...

  7. Boundary Spanning in Global Software Development

    DEFF Research Database (Denmark)

    Søderberg, Anne-Marie; Romani, Laurence

    How does a global company deal with inter-organizational boundary spanning activities? If the company is an Indian vendor, and the client a Western multinational company in need of major transformations, the answer to this question challenges prior research. This paper builds on a field study...... of Indian IT vendor managers who are responsible for developing client relations and coordinating complex global development projects. The authors revise a framework of boundary spanning leadership practices to adapt it to an offshore outsourcing context. The empirical investigation highlights how...

  8. Spatial Abilities across the Adult Life Span

    Science.gov (United States)

    Borella, Erika; Meneghetti, Chiara; Ronconi, Lucia; De Beni, Rossana

    2014-01-01

    The study investigates age-related effects across the adult life span on spatial abilities (testing subabilities based on a distinction between spatial visualization, mental rotation, and perspective taking) and spatial self-assessments. The sample consisted of 454 participants (223 women and 231 men) from 20 to 91 years of age. Results showed…

  9. The generalized minimum spanning tree problem

    NARCIS (Netherlands)

    Pop, P.C.; Kern, Walter; Still, Georg J.

    2000-01-01

    We consider the Generalized Minimum Spanning Tree Problem denoted by GMSTP. It is known that GMSTP is NP-hard and even finding a near optimal solution is NP-hard. We introduce a new mixed integer programming formulation of the problem which contains a polynomial number of constraints and a

  10. Variable Span Filters for Speech Enhancement

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Benesty, Jacob; Christensen, Mads Græsbøll

    2016-01-01

    optimal filters using a joint diagonalization as a basis. This gives excellent control over the performance, as we can optimize for noise reduction or signal distortion performance. Results from real data experiments show that the proposed variable span filters can achieve better performance than existing...

  11. Evaluation of single tracks of 17-4PH steel manufactured at different power densities and scanning speeds by selective laser melting

    CSIR Research Space (South Africa)

    Moller, Hein

    2016-11-01

    Full Text Available In Selective Laser Melting, the initial units produced are single tracks that overlap to create a single layer; from the sequence of layers, a 3D object is manufactured. The properties of the parts produced by SLM depend heavily on the properties...

  12. The effect of span length and girder type on bridge costs

    Directory of Open Access Journals (Sweden)

    Batikha Mustafa

    2017-01-01

    Full Text Available Bridges have an important role in impacting the civilization, growth and economy of cities from ancient time until these days due to their function in reducing transportation cost and time. Therefore, development of bridges has been a knowledge domain in civil engineering studies in terms of their types and construction materials to confirm a reliable, safe, economic design and construction. Girder-bridge of concrete deck and I-beam girder has been used widely for short and medium span bridges because of ease and low-cost of fabrication. However, many theoretical and practical investigations are still undertaken regarding the type of beam girder; i.e steel composite or prestressed concrete. This paper evaluates the effect of bridge span and the type of girder on the capital cost and life cycle costs of bridges. Three types of girders were investigated in this research: steel composite, pre-tensioned pre-stressed concrete and post-tensioned pre-stressed concrete. The structural design was analyzed for 5 span lengths: 20, 25, 30, 35 and 40m. Then, the capital construction cost was accounted for 15 bridges according to each span and construction materials. Moreover, the maintenance required for 50 years of bridge life was evaluated and built up as whole life costs for each bridge. As a result of this study, the influence of both span length and type of girder on initial construction cost and maintenance whole life costs were assessed to support the decision makers and designers in the selection process for the optimum solution of girder bridges.

  13. Research on the Best Root Span of 500kV Substation Frame Based on Finite Element

    Science.gov (United States)

    Chen, Hao; Fang, Qing; Chen, Haoyuan

    2018-01-01

    A-shaped and steel tube structures have been widely applied when designing 500kV substation frame in China. While, compared with steel tube, angle steels have an advantage of easy-transporting, especially in oversea projects. However, researches on substation frame with angle steel were not enough. In order to find out the best root span of 500kV substation frame under similar engineering conditions, using the overseas project substation frame as an example, the substation frames with different root span have been detailed calculated, to find the best root span according to the cost of it. When the height of column is about 30m, the root suggestion value is 6.1m×3.1m. And then, the buckling analysis of the overall structure has been carried out by ANSYS, to find out that the weak part of the structure is in the middle of it. The structural adjustment is carried out for the weak part, including adjusting the web members and the chord members, to obtain a higher bearing capacity of the structure.

  14. The Effects of Visual Attention Span and Phonological Decoding in Reading Comprehension in Dyslexia: A Path Analysis

    OpenAIRE

    Chen, C.; Schneps, M.; Masyn, K.; Thomson, J.

    2016-01-01

    Increasing evidence has shown visual attention span to be a factor, distinct from phonological skills, that explains single-word identification (pseudo-word/word reading) performance in dyslexia. Yet, little is known about how well visual attention span explains text comprehension. Observing reading comprehension in a sample of 105 high school students with dyslexia, we used a pathway analysis to examine the direct and indirect path between visual attention span and reading comprehension whil...

  15. The eye-voice span during reading aloud

    Directory of Open Access Journals (Sweden)

    Jochen eLaubrock

    2015-09-01

    Full Text Available Although eye movements during reading are modulated by cognitive processing demands, they also reflect visual sampling of the input, and possibly preparation of output for speech or the inner voice. By simultaneously recording eye movements and the voice during reading aloud, we obtained an output measure that constrains the length of time spent on cognitive processing. Here we investigate the dynamics of the eye-voice span (EVS, the distance between eye and voice. We show that the EVS is regulated immediately during fixation of a word by either increasing fixation duration or programming a regressive eye movement against the reading direction. EVS size at the beginning of a fixation was positively correlated with the likelihood of regressions and refixations. Regression probability was further increased if the EVS was still large at the end of a fixation: if adjustment of fixation duration did not sufficiently reduce the EVS during a fixation, then a regression rather than a refixation followed with high probability. We further show that the EVS can help understand cognitive influences on fixation duration during reading: in mixed model analyses, the EVS was a stronger predictor of fixation durations than either word frequency or word length. The EVS modulated the influence of several other predictors on single fixation durations. For example, word-N frequency effects were larger with a large EVS, especially when word N-1 frequency was low. Finally, a comparison of single fixation durations during oral and silent reading showed that reading is governed by similar principles in both reading modes, although EVS maintenance and articulatory processing also cause some differences. In summary, the eye-voice span is regulated by adjusting fixation duration and/or by programming a regressive eye movement when the eye-voice span gets too large. Overall, the EVS appears to be directly related to updating of the working memory buffer during reading.

  16. Robustness of Long Span Reciprocal Timber Structures

    DEFF Research Database (Denmark)

    Balfroid, Nathalie; Kirkegaard, Poul Henning; Sassone, Mario SASSONE

    2011-01-01

    engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper makes a discussion of such robustness issues related to the future development of reciprocal timber structures. The paper concludes that these kind of structures can have...... a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies....

  17. Attention Span, Anxiety and Benzodiazepine Receptors

    Science.gov (United States)

    1991-02-26

    represent a new class of nootropic druos witn a s9intricant clinical potential. 2 FINAL TECHNICAL REPORT ON GRANT AFOSR-87-0364 ENTITLED "ATTENTION SPAN...acquisition and retention of novel aversively motivated goal-directed behavior. This nootropic action may be linked to the flumazenil enhanced brain...metabolism, as revealed by oxygen utilization in the rat forebrain [32]. The nootropic effect may also be linked to increased protein synthesis in the CNS, an

  18. 'Localised creativity: a life span perspective'

    OpenAIRE

    Worth, Piers J.

    2000-01-01

    This thesis is based around a biographic study of the lives of 40 individuals (24 men and 16 women) with a reputation for creative work in a localised context (such as an organisation). The study examines life span development patterns from birth to middle age (45 - 60 years of age) with data gained by biographic interview and thematic analysis. Participants selected for this study are creative in that they have a reputation for producing new, novel and useful or appropriate contributions in ...

  19. Phenomenon of life span instability in Drosophila melanogaster: Pt. 2

    International Nuclear Information System (INIS)

    Izmaylov, D.M.; Obukhova, L.K.; Okladnova, O.V.; Akifyev, A.P.

    1993-01-01

    The dynamics of life span (LS) have been studied in successive generations of postirradiation and control groups of Drosophila melanogaster, strain D-32, after a single exposure to Co 60 γ-quantum irradiation. It has been shown using mathematical procedures that in all postirradiation generations, with one exception, survival curves retain their canonical shape. This is indicative of the unchangeable nature of LS distribution. The means LS of the progeny of irradiated parents either coincides with control values or can be higher or lower. Moreover, single irradiation results in an altered time-scanning of LS variations in successive generations as compared with controls. The possible origin of LS instability is discussed. (author)

  20. Spanning trees and the Eurozone crisis

    Science.gov (United States)

    Dias, João

    2013-12-01

    The sovereign debt crisis in the euro area has not yet been solved and recent developments in Spain and Italy have further deteriorated the situation. In this paper we develop a new approach to analyze the ongoing Eurozone crisis. Firstly, we use Maximum Spanning Trees to analyze the topological properties of government bond rates’ dynamics. Secondly, we combine the information given by both Maximum and Minimum Spanning Trees to obtain a measure of market dissimilarity or disintegration. Thirdly, we extend this measure to include a convenient distance not limited to the interval [0, 2]. Our empirical results show that Maximum Spanning Tree gives an adequate description of the separation of the euro area into two distinct groups: those countries strongly affected by the crisis and those that have remained resilient during this period. The measures of market dissimilarity also reveal a persistent separation of these two groups and, according to our second measure, this separation strongly increased during the period July 2009-March 2012.

  1. Vision in Flies: Measuring the Attention Span.

    Science.gov (United States)

    Koenig, Sebastian; Wolf, Reinhard; Heisenberg, Martin

    2016-01-01

    A visual stimulus at a particular location of the visual field may elicit a behavior while at the same time equally salient stimuli in other parts do not. This property of visual systems is known as selective visual attention (SVA). The animal is said to have a focus of attention (FoA) which it has shifted to a particular location. Visual attention normally involves an attention span at the location to which the FoA has been shifted. Here the attention span is measured in Drosophila. The fly is tethered and hence has its eyes fixed in space. It can shift its FoA internally. This shift is revealed using two simultaneous test stimuli with characteristic responses at their particular locations. In tethered flight a wild type fly keeps its FoA at a certain location for up to 4s. Flies with a mutation in the radish gene, that has been suggested to be involved in attention-like mechanisms, display a reduced attention span of only 1s.

  2. Improving Memory Span in Children with Down Syndrome

    Science.gov (United States)

    Conners, F. A.; Rosenquist, C. J.; Arnett, L.; Moore, M. S.; Hume, L. E.

    2008-01-01

    Background: Down syndrome (DS) is characterized by impaired memory span, particularly auditory verbal memory span. Memory span is linked developmentally to several language capabilities, and may be a basic capacity that enables language learning. If children with DS had better memory span, they might benefit more from language intervention. The…

  3. Effect of shear span-to-depth ratio on the shear behavior of BFRP-RC deep beams

    Directory of Open Access Journals (Sweden)

    Alhamad Siyam

    2017-01-01

    Full Text Available This study investigates the shear behavior of deep concrete beams reinforced with basalt fiber reinforced polymer (BFRP bars for flexure without web reinforcements. The experimental testing performed herein consisted of a total of 4 short beams, three of which were reinforced with BFRP and one beam was reinforced with steel bars. The primary test variable was the shear-span-to-effective-depth ratio (a/d and its influence on the beams’ mid-span deflections, shear capacity, load-deformation relationships and the failure modes.

  4. Corrosion resistant steel

    International Nuclear Information System (INIS)

    Zubchenko, A.S.; Borisov, V.P.; Latyshev, V.B.

    1980-01-01

    Corrosion resistant steel for production of sheets and tubes containing C, Mn, Cr, Si, Fe is suggested. It is alloyed with vanadium and cerium for improving tensile properties and ductility. The steel can be melted by a conventional method in electric-arc or induction furnaces. The mentioned steel is intended to be used as a substitute for nickel-bearing austenitic steels

  5. Current status of stainless steel industry and development of stainless steel

    International Nuclear Information System (INIS)

    Lee, Yong Deuk; Lee, Chan Soo; Kim Kwang Tae

    2000-01-01

    Stainless steel is not only clean and smooth in its surface, but also it is superior in quality in terms of corrosion resistance and strength. So that, it is widely in use in the field of construction, chemical installations, and other industries. Growth of stainless steel industry started since the steel technology was developed for mass production in 1960s. Since then stainless steel industry grew rapidly on account of diversified development in this field and growth rate went up to 5.8% per year comparable to 2.3% of steel growth. The rapid growth is attributed to significant industry developments in Europe and Japan in the years of 1970s and 1980s. In addition to these the expansion of stainless steel industry in Korea and Taiwan. Presently Korea produces about 120,000 tons of stainless steel and occupies about 8% of international market. This means Korea become the second largest single country in world in stainless steel production. Moreover Korea is to reinforce its domestic production line by affiliating production companies, increasing of production capability, and specializing in types of stainless steel. This paper is to describe activity of material development, and types of stainless steel for industry use. (Hong, J. S.)

  6. Signal Enhancement with Variable Span Linear Filters

    DEFF Research Database (Denmark)

    Benesty, Jacob; Christensen, Mads Græsbøll; Jensen, Jesper Rindom

    . Variable span filters combine the ideas of optimal linear filters with those of subspace methods, as they involve the joint diagonalization of the correlation matrices of the desired signal and the noise. The book shows how some well-known filter designs, e.g. the minimum distortion, maximum signal...... the time and STFT domains, and, lastly, in time-domain binaural enhancement. In these contexts, the properties of these filters are analyzed in terms of their noise reduction capabilities and desired signal distortion, and the analyses are validated and further explored in simulations....

  7. Spanning the Home/Work Creative Space

    DEFF Research Database (Denmark)

    Davis, Lee N.; Davis, Jerome; Hoisl, Karin

    the employee brings to work. Based on Woodman et al.’s (1993) “interactionist perspective” on organizational creativity, supplemented by literature on search and knowledge re/combination, we explore whether and how leisure time activities can span the creative space between the employee’s home and workplace...... – given the range of multi-level inputs that may also contribute to workplace creativity. We use original survey data comprising 4,138 inventions from 21 European countries, the United States and Japan, in all major industries. Organizational creativity is measured by the asset value of the patent...

  8. Analysis of protection spanning-tree protocol

    Directory of Open Access Journals (Sweden)

    Б.Я. Корнієнко

    2007-01-01

    Full Text Available  Extraordinary sweeping  of  IT – development  causes vulnerabilities and, thereafter, attacks that use these vulnerabilities. That is why one must post factum or even in advance speed up invention of new information  security systems as well as develop the old ones. The matter of article concerns Spanning-Tree Protocol  – the vivid example of the case, when the cure of the vulnerability creates dozen of new "weak spots".

  9. Decentralized Pricing in Minimum Cost Spanning Trees

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Moulin, Hervé; Østerdal, Lars Peter

    In the minimum cost spanning tree model we consider decentralized pricing rules, i.e. rules that cover at least the ecient cost while the price charged to each user only depends upon his own connection costs. We de ne a canonical pricing rule and provide two axiomatic characterizations. First......, the canonical pricing rule is the smallest among those that improve upon the Stand Alone bound, and are either superadditive or piece-wise linear in connection costs. Our second, direct characterization relies on two simple properties highlighting the special role of the source cost....

  10. Multiple self-protected spanning-trees-based architecture for fast recovery and load balance in metro ethernet

    Science.gov (United States)

    Chen, Wentao; Zhong, Xian; Jin, Depeng; Zeng, Lieguang

    2007-11-01

    Ethernet is now expanding into the metro area networks. To address the fast recovery and load balance issues in Metro Ethernet, we propose a multiple self-protected spanning trees based architecture. A self-protected spanning tree can recover from the link failure without the help the other spanning trees, which is different from the spanning trees in all the previously advocated Multiple Spanning Tree Protocol (MSTP) based architectures. The Single Link Replace Mechanism (SLRM) is the essential of the proposed architecture. The SLRM transforms a self-protected spanning tree into another spanning tree by only replacing one link in the tree with another link out of the tree. The SLRM provides a recovery mechanism by replacing the failed link in the self-protected spanning tree with the normal link out of the tree, and makes a two-edge connected network survives any single link failure. It also provides an additional load balance mechanism by changing the topology of the spanning tree, which can not be implemented in the traditional MSTP-based architectures. The recovery and load balance mechanisms using the SLRM are detailed illustrated and evaluated using the sample networks. Simulation results demonstrate the effectiveness of the SLRM in achieving fast recovery and dynamic load balance.

  11. Plasma nitriding of steels

    CERN Document Server

    Aghajani, Hossein

    2017-01-01

    This book focuses on the effect of plasma nitriding on the properties of steels. Parameters of different grades of steels are considered, such as structural and constructional steels, stainless steels and tools steels. The reader will find within the text an introduction to nitriding treatment, the basis of plasma and its roll in nitriding. The authors also address the advantages and disadvantages of plasma nitriding in comparison with other nitriding methods. .

  12. Life-span studies of inhaled plutonium in beagle dogs

    International Nuclear Information System (INIS)

    Bair, W.J.

    1990-04-01

    In 1970 a life-span study with over 300 beagle dogs was begun to gain an understanding of long-term health effects resulting from respiratory tract intakes of plutonium and to derive risk estimates that might be applied to plutonium and other transuranic elements. Groups of beagle dogs were given single exposures to 239 PuO 2 , 238 PuO 2 , or 239 Pu(NO 3 ) 4 to obtain graded levels of initial lung burdens ranging from 1 to 1800 Bq lung. The objective of this paper is to give you a progress report on the current life-span studies of inhaled plutonium in beagle dogs at the Pacific Northwest Laboratory. I will describe the biokinetics of inhaled plutonium in dogs and the resulting health effects. I will also mention some studies directed towards understanding the mechanism leading to these effects. Finally, I will discuss the current risk estimates derived from these studies and how they might relate to plutonium exposures in humans. 5 refs., 13 figs., 4 tabs

  13. 78 FR 21596 - Drawn Stainless Steel Sinks From the People's Republic of China: Countervailing Duty Order

    Science.gov (United States)

    2013-04-11

    ... single or multiple drawn bowls, with or without drain boards, whether finished or unfinished, regardless... steel, and then welding and finishing the vertical corners to form the bowls. Stainless steel sinks with...

  14. Ultrahigh carbon steels, Damascus steels, and superplasticity

    Energy Technology Data Exchange (ETDEWEB)

    Sherby, O.D. [Stanford Univ., CA (United States). Dept. of Materials Science and Engineering; Wadsworth, J. [Lawrence Livermore National Lab., CA (United States)

    1997-04-01

    The processing properties of ultrahigh carbon steels (UHCSs) have been studied at Stanford University over the past twenty years. These studies have shown that such steels (1 to 2.1% C) can be made superplastic at elevated temperature and can have remarkable mechanical properties at room temperature. It was the investigation of these UHCSs that eventually brought us to study the myths, magic, and metallurgy of ancient Damascus steels, which in fact, were also ultrahigh carbon steels. These steels were made in India as castings, known as wootz, possibly as far back as the time of Alexander the Great. The best swords are believed to have been forged in Persia from Indian wootz. This paper centers on recent work on superplastic UHCSs and on their relation to Damascus steels. 32 refs., 6 figs.

  15. Industrial steel hall with bridge grane

    OpenAIRE

    Jurejevčič, Nejc

    2016-01-01

    In introduction this diploma thesis describes all main characteristics of (single block)? industrial steel hall with bridge crane. Load arrangement on the supporting structure which covers general actions (snow load and wind action), self-weight and dynamic load of bridge crane was designed with moment resisting frame in transverse direction and frame with concentric diagonal bracing in longitudinual direction. Actions induced by crane bridge was considered in design of runway beam. Steel hal...

  16. Evaluation of J and CTOD (Crack Tip Opening Displacement) fracture parameters for pipeline steels using Single Edge Notch Tension SE(T) specimens

    Energy Technology Data Exchange (ETDEWEB)

    Paredes Tobar, Lenin Marcelo; Ruggieri, Claudio [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Dept. de Engenharia Naval e Oceanica

    2009-12-19

    This work presents an evaluation procedure to determine the elastic-plastic J-integral and CTOD for pin-loaded and clamped single edge notch tension (SE(T)) specimens based upon the eta-method. The primary objective is to derive estimation equations applicable to determine J and CTOD fracture parameters for a wide range of a/W-ratios and material flow properties. Very detailed non-linear finite element analyses for plane-strain and full-thickness, 3-D models provide the evolution of load with increased crack mouth opening displacement which is required for the estimation procedure. The present analyses, when taken together with previous studies provide a fairly extensive body of results which serve to determine parameters J and CTOD for different materials using tension specimens with varying geometries. (author)

  17. Executive function across the life span.

    Science.gov (United States)

    Zelazo, Philip David; Craik, Fergus I M; Booth, Laura

    2004-01-01

    The development and determinants of executive function (EF) were studied in children (mean age=8.8 years), young adults ( M= 22.3 years), and elderly adults (M = 71.1 years). EF was indexed by perseverative responding on two bidimensional sorting tasks (Visually Cued Color-Shape task and Auditorily Cued Number-Numeral task), and age-related changes in EF were considered in relation to estimates of conscious vs. unconscious memory that were obtained using the process dissociation procedure (PDP). Results revealed the rise and fall of EF across the life span, with significant quadratic trends found for performance on both sorting tasks and for the conscious recollection component (C) of the PDP task. Regression analyses indicated that PDP estimates of conscious memory accounted for variation in performance on the visual sorting task, but not on the auditory sorting task. The findings are discussed in terms of their implications for hierarchical models of EF and its development.

  18. Spanning the Home/Work Creative Space

    DEFF Research Database (Denmark)

    Davis, Lee N.; Davis, Jerome; Hoisl, Karin

    the employee brings to work. Based on Woodman et al.’s (1993) “interactionist perspective” on organizational creativity, supplemented by literature on search and knowledge re/combination, we explore whether and how leisure time activities can span the creative space between the employee’s home and workplace......This paper explores the link between employee leisure time activities and the value of their creative output. We argue that leisure time activities – both in general, and specifically with regard to the employee’s choice of hobbies – both illuminate and shape the attitudes and attributes...... – given the range of multi-level inputs that may also contribute to workplace creativity. We use original survey data comprising 4,138 inventions from 21 European countries, the United States and Japan, in all major industries. Organizational creativity is measured by the asset value of the patent...

  19. Interorganizational Boundary Spanning in Global Software Development

    DEFF Research Database (Denmark)

    Søderberg, Anne-Marie; Romani, Laurence

    projects across multiple cultures, languages, organisational boundaries, time zones and geographical distances. It looks into how these vendor managers get prepared for their complex boundary spanning work, which cross-cultural challenges they experience in their collaboration with Western clients...... to virtuality and cultural diversity. This paper, which draws on a case study of collaborative work in a global software development project, focuses on key boundary spanners in an Indian vendor company, who are responsible for developing trustful and sustainable client relations and coordinating complex...... (economic, cultural, social and symbolic) in the analysis of imbalances of power between the vendor and the client, they highlight that power and politics need to be taken into account when studying collaborative partnerships in a global context....

  20. On the cardinality of smallest spanning sets of rings | Boudi ...

    African Journals Online (AJOL)

    Let R = (R, +, ·) be a ring. Then Z ⊆ R is called spanning if the R-module generated by Z is equal to the ring R. A spanning set Z ⊆ R is called smallest if there is no spanning set of smaller cardinality than Z. It will be shown that the cardinality of a smallest spanning set of a ring R is not always decidable. In particular, a ring R ...

  1. EU Regulation of E-Commercspan>e A Commentary

    NARCIS (Netherlands)

    Lodder, A.R.; Murray, A.D.

    2017-01-01

    For the last twenty years the European Union has been extremely active in the field of e-commercspan>e. This important new book addresses the key pieces of EU legislation in the field of e-commercspan>e, including the E-Commercspan>e Directive, the Services Directive, the Consumer Directive, the General Data

  2. Weldability of class 2 armor steel using gas tungsten arc welding

    OpenAIRE

    A. Karaaslan; C. Akca

    2008-01-01

    Purpose: In this study, microstructural and mechanical evaluations of class 2 armor steel after single-pass andpre-heated/single-pass welding were investigated to reveal the effect of pre-heating on heat affected zone (HAZ)in thin armor steel parts.Design/methodology/approach: In this research, class 2 armor steel parts were welded using single-passand pre-heated/single-pass conditions to examine optimal welding parameters in relatively thin parts. Weldedspecimens were investigated using opti...

  3. Cross-Language Modulation of Visual Attention Span: An Arabic-French-Spanish Comparison in Skilled Adult Readers.

    Science.gov (United States)

    Awadh, Faris H R; Phénix, Thierry; Antzaka, Alexia; Lallier, Marie; Carreiras, Manuel; Valdois, Sylviane

    2016-01-01

    In delineating the amount of orthographic information that can be processed in parallel during a single fixation, the visual attention (VA) span acts as a key component of the reading system. Previous studies focused on the contribution of VA span to normal and pathological reading in monolingual and bilingual children from different European languages, without direct cross-language comparison. In the current paper, we explored modulations of VA span abilities in three languages -French, Spanish, and Arabic- that differ in transparency, reading direction and writing systems. The participants were skilled adult readers who were native speakers of French, Spanish or Arabic. They were administered tasks of global and partial letter report, single letter identification and text reading. Their VA span abilities were assessed using tasks that require the processing of briefly presented five consonant strings (e.g., R S H F T). All five consonants had to be reported in global report but a single cued letter in partial report. Results showed that VA span was reduced in Arabic readers as compared to French or Spanish readers who otherwise show a similar high performance in the two report tasks. The analysis of VA span response patterns in global report showed a left-right asymmetry in all three languages. A leftward letter advantage was found in French and Spanish but a rightward advantage in Arabic. The response patterns were symmetric in partial report, regardless of the language. Last, a significant relationship was found between VA span abilities and reading speed but only for French. The overall findings suggest that the size of VA span, the shape of VA span response patterns and the VA Span-reading relationship are modulated by language-specific features.

  4. Advance features in the SPAN and SPAN/XRF gamma ray and X ray spectrum analysis software

    International Nuclear Information System (INIS)

    Wang Liyu

    1998-01-01

    This paper describes the advanced techniques, integral peak background, experimental peak shape and complex peak shape, which have been used successfully in the software packages SPAN and SPAN/XRF to process gamma ray and X ray spectra from HPGe and Si(Li) detector. Main features of SPAN and SPAN/XRF are also described. The software runs on PC and has convenient graphical capabilities and a powerful user interface. (author)

  5. BEHAVIOR OF STEEL DP 600 UNDER DYNAMIC CONDITIONS

    Directory of Open Access Journals (Sweden)

    Miroslav Német

    2014-01-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 Dynamic tensile testing of sheet steels is becoming more important. Experimental dynamic tensile technique is depending on the strain rate. For experiments was used two testing method servo hydraulic and single bar method. Experiments was realized on steel grade DP 600. Steel were performed and evaluated static and dynamic tests. Was investigated substructure in static and dynamic loading conditions.

  6. Trends in steel technology

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    Dual phase steels, composite products, and microalloyed steels are making inroads in the automotive industry applications for bumpers, automotive parts, bodies, mechanical parts, suspension and steering equipment and truck bumpers. New steels are also used to support solar mirrors and cells, in corrosive environments in the oil and gas industry, fusion reactors, and pressure vessels in nuclear power plants

  7. Experimental and finite element study of ultimate strength of continuous composite concrete slabs with steel decking

    Science.gov (United States)

    Gholamhoseini, Alireza

    2018-02-01

    Composite one-way concrete slabs with profiled steel decking as permanent formwork are commonly used in the construction industry. The steel decking supports the wet concrete of a cast in situ reinforced or post-tensioned concrete slab and, after the concrete sets, acts as external reinforcement. In this type of slab, longitudinal shear failure between the concrete and the steel decking is the most common type of failure at the ultimate load stage. Design codes require the experimental evaluation of the ultimate load capacity and longitudinal shear strength of each type of steel decking using full-scale tests on simple-span slabs. There is also no procedure in current design codes to evaluate the ultimate load capacity and longitudinal shear strength of continuous composite slabs and this is often assessed experimentally by full-scale tests. This paper presents the results of three full-scale tests up to failure on continuous composite concrete slabs cast with trapezoidal steel decking profile (KF70) that is widely used in Australia. Slab specimens were tested in four-point bending at each span with shear spans of span/4. The longitudinal shear failure of each slab is evaluated and the measured mid-span deflection, the end slip and the mid-span steel and concrete strains are also presented and discussed. Redistribution of bending moment in each slab is presented and discussed. A finite element model is proposed and verified by experimental data using interface element to model the bond properties between steel decking and concrete slab and investigate the ultimate strength of continuous composite concrete slabs.

  8. Experimental and finite element study of ultimate strength of continuous composite concrete slabs with steel decking

    Science.gov (United States)

    Gholamhoseini, Alireza

    2018-03-01

    Composite one-way concrete slabs with profiled steel decking as permanent formwork are commonly used in the construction industry. The steel decking supports the wet concrete of a cast in situ reinforced or post-tensioned concrete slab and, after the concrete sets, acts as external reinforcement. In this type of slab, longitudinal shear failure between the concrete and the steel decking is the most common type of failure at the ultimate load stage. Design codes require the experimental evaluation of the ultimate load capacity and longitudinal shear strength of each type of steel decking using full-scale tests on simple-span slabs. There is also no procedure in current design codes to evaluate the ultimate load capacity and longitudinal shear strength of continuous composite slabs and this is often assessed experimentally by full-scale tests. This paper presents the results of three full-scale tests up to failure on continuous composite concrete slabs cast with trapezoidal steel decking profile (KF70) that is widely used in Australia. Slab specimens were tested in four-point bending at each span with shear spans of span/4. The longitudinal shear failure of each slab is evaluated and the measured mid-span deflection, the end slip and the mid-span steel and concrete strains are also presented and discussed. Redistribution of bending moment in each slab is presented and discussed. A finite element model is proposed and verified by experimental data using interface element to model the bond properties between steel decking and concrete slab and investigate the ultimate strength of continuous composite concrete slabs.

  9. Weldability of Stainless Steels

    International Nuclear Information System (INIS)

    Saida, Kazuyoshi

    2010-01-01

    It gives an outline of metallographic properties of welding zone of stainless steels, generation and mechanisms of welding crack and decreasing of corrosion resistance of welding zone. It consists of seven chapters such as introduction, some kinds of stainless steels and properties, metallographic properties of welding zone, weld crack, toughness of welding zone, corrosion resistance and summary. The solidification modes of stainless steels, each solidification mode on the cross section of Fe-Cr-Ni alloy phase diagram, each solidification mode of weld stainless steels metal by electron beam welding, segregation state of alloy elements at each solidification mode, Schaeffler diagram, Delong diagram, effects of (P + S) mass content in % and Cr/Ni equivalent on solidification cracking of weld stainless steels metal, solidification crack susceptibility of weld high purity stainless steels metal, effects of trace impurity elements on solidification crack susceptibility of weld high purity stainless steels metal, ductile fracture susceptibility of weld austenitic stainless steels metal, effects of H2 and ferrite content on generation of crack of weld 25Cr-5N duplex stainless steels, effects of O and N content on toughness of weld SUS 447J1 metals, effect of ferrite content on aging toughness of weld austenitic stainless steel metal, corrosion morphology of welding zone of stainless steels, generation mechanism of knife line attack phenomenon, and corrosion potential of some kinds of metals in seawater at room temperature are illustrated. (S.Y.)

  10. The steel scrap age.

    Science.gov (United States)

    Pauliuk, Stefan; Milford, Rachel L; Müller, Daniel B; Allwood, Julian M

    2013-04-02

    Steel production accounts for 25% of industrial carbon emissions. Long-term forecasts of steel demand and scrap supply are needed to develop strategies for how the steel industry could respond to industrialization and urbanization in the developing world while simultaneously reducing its environmental impact, and in particular, its carbon footprint. We developed a dynamic stock model to estimate future final demand for steel and the available scrap for 10 world regions. Based on evidence from developed countries, we assumed that per capita in-use stocks will saturate eventually. We determined the response of the entire steel cycle to stock saturation, in particular the future split between primary and secondary steel production. During the 21st century, steel demand may peak in the developed world, China, the Middle East, Latin America, and India. As China completes its industrialization, global primary steel production may peak between 2020 and 2030 and decline thereafter. We developed a capacity model to show how extensive trade of finished steel could prolong the lifetime of the Chinese steelmaking assets. Secondary steel production will more than double by 2050, and it may surpass primary production between 2050 and 2060: the late 21st century can become the steel scrap age.

  11. Sex differences in life span: Females homozygous for the X chromosome do not suffer the shorter life span predicted by the unguarded X hypothesis.

    Science.gov (United States)

    Brengdahl, Martin; Kimber, Christopher M; Maguire-Baxter, Jack; Friberg, Urban

    2018-03-01

    Life span differs between the sexes in many species. Three hypotheses to explain this interesting pattern have been proposed, involving different drivers: sexual selection, asymmetrical inheritance of cytoplasmic genomes, and hemizygosity of the X(Z) chromosome (the unguarded X hypothesis). Of these, the unguarded X has received the least experimental attention. This hypothesis suggests that the heterogametic sex suffers a shortened life span because recessive deleterious alleles on its single X(Z) chromosome are expressed unconditionally. In Drosophila melanogaster, the X chromosome is unusually large (∼20% of the genome), providing a powerful model for evaluating theories involving the X. Here, we test the unguarded X hypothesis by forcing D. melanogaster females from a laboratory population to express recessive X-linked alleles to the same degree as males, using females exclusively made homozygous for the X chromosome. We find no evidence for reduced life span or egg-to-adult viability due to X homozygozity. In contrast, males and females homozygous for an autosome both suffer similar, significant reductions in those traits. The logic of the unguarded X hypothesis is indisputable, but our results suggest that the degree to which recessive deleterious X-linked alleles depress performance in the heterogametic sex appears too small to explain general sex differences in life span. © 2018 The Author(s). Evolution © 2018 The Society for the Study of Evolution.

  12. Alloy dissolution in argon stirred steel

    Science.gov (United States)

    Webber, Darryl Scott

    Alloying is required for the production of all steel products from small castings to large beams. Addition of large quantities of bulk alloys can result in alloy segregation and inconsistent alloy recovery. The objective of this research was to better understand alloy dissolution in liquid steel especially as it relates to Missouri S&Ts' patented continuous steelmaking process. A 45-kilogram capacity ladle with a single porous plug was used to evaluate the effect of four experimental factors on alloy dissolution: alloy species, alloy size or form, argon flow rate, and furnace tap temperature. Four alloys were tested experimentally including Class I low carbon ferromanganese, nickel and tin (as a surrogate for low melting alloys) and Class II ferroniobium. The alloys ranged in size and form from granular to 30 mm diameter lumps. Experimental results were evaluated using a theoretically based numerical model for the steel shell period, alloy mixing (Class I) and alloy dissolution (Class II). A CFD model of the experimental ladle was used to understand steel motion in the ladle and to provide steel velocity magnitudes for the numerical steel shell model. Experiments and modeling confirmed that smaller sized alloys have shorter steel shell periods and homogenize faster than larger particles. Increasing the argon flow rate shortened mixing times and reduced the delay between alloy addition and the first appearance of alloy in the melt. In addition, for every five degree increase in steel bath temperature the steel shell period was shortened by approximately four percent. Class II ferroniobium alloy dissolution was an order of magnitude slower than Class I alloy mixing.

  13. Stress corrosion cracking of AISI 321 stainless steel in acidic ...

    Indian Academy of Sciences (India)

    Unknown

    seashore facilities showed that an acidic chloride solution film formed on the surface of steel and the stainless steel ... of the specimens was single phase auste- nite. After heat treatment, the specimens were pickled for .... metal at the crack tip reacted with the test solution to generate vacancies and the brittle fracture process ...

  14. COMPARATIVE ANALYSIS OF STEEL AND ALUMINUM STRUCTURES

    Directory of Open Access Journals (Sweden)

    Josip Peko

    2016-12-01

    Full Text Available This study examined steel and aluminum variants of modern exhibition structures in which the main design requirements include low weight (increased span/depth ratio, transportation, and construction and durability (resistance to corrosion. This included a design situation in which the structural application of aluminum alloys provided an extremely convenient and practical solution. Viability of an aluminum structure depends on several factors and requires a detailed analysis. The overall conclusion of the study indicated that aluminum can be used as a structural material and as a viable alternative to steel for Croatian snow and wind load values and evidently in cases in which positive properties of aluminum are required for structural design. Furthermore, a structural fire analysis was conducted for an aluminum variant structure by using a zone model for realistic fire analysis. The results suggested that passive fire protection for the main structural members was not required in the event of areal fire with duration of 60 min.

  15. Effect of practice and span length on the dual-task coordination executive test

    Directory of Open Access Journals (Sweden)

    Sylwan R.P.

    1999-01-01

    Full Text Available The measure "mu", proposed as an index of the ability to coordinate concurrent box-crossing (BC and digit-span (DS tasks in the dual task (DT, should reflect the capacity of the executive component of the working memory system. We investigated the effect of practice in BC and of a change in the digit span on mu by adding previous practice trials in BC and diminishing, maintaining or increasing the digit sequence length. The mu behavior was evaluated throughout three trials of the test. Reported strategies in digit tasks were also analyzed. Subjects with diminished span showed the best performance in DT due to a stable performance in DS and BC in the single- and dual-task conditions. These subjects also showed a more stable performance throughout trials. Subjects with diminished span tended to employ effortless strategies, whereas subjects with increased span employed effort-requiring strategies and showed the lowest means of mu. Subjects with initial practice trials showed the best performance in BC and the most differentiated performance between the single- and dual-task conditions in BC. The correlation coefficient between the mu values obtained in the first and second trials was 0.814 for subjects with diminished span and practice trials in BC. It seems that the within-session practice in BC and the performance variability in DS affect the reliability of the index mu. To control these factors we propose the introduction of previous practice trials in BC and a modification of the current method to determine the digit sequence length. This proposal should contribute to the development of a more reliable method to evaluate the executive capacity of coordination in the dual-task paradigm.

  16. 2169 steel waveform experiments.

    Energy Technology Data Exchange (ETDEWEB)

    Furnish, Michael David; Alexander, C. Scott; Reinhart, William Dodd; Brown, Justin L.

    2012-11-01

    In support of LLNL efforts to develop multiscale models of a variety of materials, we have performed a set of eight gas gun impact experiments on 2169 steel (21% Cr, 6% Ni, 9% Mn, balance predominantly Fe). These experiments provided carefully controlled shock, reshock and release velocimetry data, with initial shock stresses ranging from 10 to 50 GPa (particle velocities from 0.25 to 1.05 km/s). Both windowed and free-surface measurements were included in this experiment set to increase the utility of the data set, as were samples ranging in thickness from 1 to 5 mm. Target physical phenomena included the elastic/plastic transition (Hugoniot elastic limit), the Hugoniot, any phase transition phenomena, and the release path (windowed and free-surface). The Hugoniot was found to be nearly linear, with no indications of the Fe phase transition. Releases were non-hysteretic, and relatively consistent between 3- and 5-mmthick samples (the 3 mm samples giving slightly lower wavespeeds on release). Reshock tests with explosively welded impactors produced clean results; those with glue bonds showed transient releases prior to the arrival of the reshock, reducing their usefulness for deriving strength information. The free-surface samples, which were steps on a single piece of steel, showed lower wavespeeds for thin (1 mm) samples than for thicker (2 or 4 mm) samples. A configuration used for the last three shots allows release information to be determined from these free surface samples. The sample strength appears to increase with stress from ~1 GPa to ~ 3 GPa over this range, consistent with other recent work but about 40% above the Steinberg model.

  17. Negotiating and Spanning Boundaries in Offshore Outsourcing

    DEFF Research Database (Denmark)

    Sonne, Tine; Søderberg, Anne-Marie; Tøth, Thomas

    2013-01-01

    Much research of geographically distributed teams has taken its point of departure in Western MNCs and addressed headquarter concerns with managing employees at distant locations. In this single case study we look deeper into how vendor staff members in a virtual captive center perceive intercult......Much research of geographically distributed teams has taken its point of departure in Western MNCs and addressed headquarter concerns with managing employees at distant locations. In this single case study we look deeper into how vendor staff members in a virtual captive center perceive...... intercultural collaboration with managers and staff at the outsourcing client´s site. We also raise the question: Who and what motivates them to stay at work in this Indian IT development context where many Western clients have experienced serious challenges with outsourcing due to high attrition rates......? The single case is studied through company documents, semi-structured interviews with managers and employees from both the client and the vendor organizations, and participant observations of intercultural encounters. Since observations and interview accounts gave the impression that virtual team...

  18. The visual attention span deficit in Chinese children with reading fluency difficulty.

    Science.gov (United States)

    Zhao, Jing; Liu, Menglian; Liu, Hanlong; Huang, Chen

    2018-02-01

    With reading development, some children fail to learn to read fluently. However, reading fluency difficulty (RFD) has not been fully investigated. The present study explored the underlying mechanism of RFD from the aspect of visual attention span. Fourteen Chinese children with RFD and fourteen age-matched normal readers participated. The visual 1-back task was adopted to examine visual attention span. Reaction time and accuracy were recorded, and relevant d-prime (d') scores were computed. Results showed that children with RFD exhibited lower accuracy and lower d' values than the controls did in the visual 1-back task, revealing a visual attention span deficit. Further analyses on d' values revealed that the attention distribution seemed to exhibit an inverted U-shaped pattern without lateralization for normal readers, but a W-shaped pattern with a rightward bias for children with RFD, which was discussed based on between-group variation in reading strategies. Results of the correlation analyses showed that visual attention span was associated with reading fluency at the sentence level for normal readers, but was related to reading fluency at the single-character level for children with RFD. The different patterns in correlations between groups revealed that visual attention span might be affected by the variation in reading strategies. The current findings extend previous data from alphabetic languages to Chinese, a logographic language with a particularly deep orthography, and have implications for reading-dysfluency remediation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Comparison of Failure Process of Bended Beams Reinforced with Steel Bars and GFRP Bars

    Science.gov (United States)

    Kaszyńska, Maria; Błyszko, Jarosław; Olczyk, Norbert

    2017-10-01

    The Fibre Reinforced Polymer (FRP) composite rebar has been used in civil engineering structures for several years. It has many characteristics, which not only are equal to those of steel rebar, but significantly surpass them. The composite rebar has high corrosion resistance, electromagnetic neutrality and has much higher tensile strength than steel. Also, because of its low weight and easy processing composite rebar is convenient for shipment and use. Development of architectural concrete technology in past years opens new, interesting perspectives for use of composite rebar. However, implementation of those concretes in structures is often burdened with many issues, especially concerning faulty performance. One of it is rebar’s corrosion, visible on the surface of the element as rusty stains. Even if the structure was properly developed meeting all the requirements for texture, porosity or colour uniformity, and rusty stains can completely destroy the final decorative effect of concrete’s surface. Despite many advantages, the use of composite rebar in reinforced structures creates significant number of new “behaviours” in its different working stages. Structures reinforced with the steel rebar will behave differently than the ones with composite FRP rebar under continuous load, in case of a fire, exposed to aggressive environment or at breaking point. In the latter, significant role plays its linear-elastic behaviour in the whole tensile range till rupture. This means that the FPR rebar does not exhibit plastic deformation and reaches its bearing capacity suddenly without any visible signs. This should be considered during designing stage and included as an additional reduction coefficient. The article presents result of research and analysis of destructive tests performed on concrete beams reinforced with traditional steel rebar and composite rebar made of glass fibre and braided with basaltic (GFRP). Four single-span simply supported beams under static

  20. Investigations on Torsion of the Two-Chords Single Laced Members

    Directory of Open Access Journals (Sweden)

    Lorkowski Paweł

    2017-06-01

    Full Text Available The paper presents experimental and numerical studies to determine the equivalent second moment of area of the uniform torsion of the two-chord steel single laced members. The members are used as poles of railway traction network gates, and steel columns of framed buildings as well. The stiffness of uniform torsion of this kind of columns allows to the determine the critical loads of the spatial stability. The experimental studies have been realized on a single - span members with rotation arrested at their ends, loaded by a torque applied at the mid-span. The relationship between angle of rotation of the considered cross-section and the torque has been determined. Appropriate numerical model was created in the ABAQUS program, based on the finite element method. A very good compatibility has been observed between experimental and numerical studies. The equivalent second moment of area of the uniform torsion for analysed members has been determined by comparing the experimental and analytical results to those obtained from differential equation of non-uniform torsion, based on Vlasov’s theory. Additionally, the parametric analyses of similar members subjected to the uniform torsion, for the richer range of cross-sections have been carried out by the means of SOFiSTiK program. The purpose of the latter was determining parametrical formulas for calculation of the second moment of area of uniform torsion.

  1. Investigations on Torsion of the Two-Chords Single Laced Members

    Science.gov (United States)

    Lorkowski, Paweł; Gosowski, Bronisław

    2017-06-01

    The paper presents experimental and numerical studies to determine the equivalent second moment of area of the uniform torsion of the two-chord steel single laced members. The members are used as poles of railway traction network gates, and steel columns of framed buildings as well. The stiffness of uniform torsion of this kind of columns allows to the determine the critical loads of the spatial stability. The experimental studies have been realized on a single - span members with rotation arrested at their ends, loaded by a torque applied at the mid-span. The relationship between angle of rotation of the considered cross-section and the torque has been determined. Appropriate numerical model was created in the ABAQUS program, based on the finite element method. A very good compatibility has been observed between experimental and numerical studies. The equivalent second moment of area of the uniform torsion for analysed members has been determined by comparing the experimental and analytical results to those obtained from differential equation of non-uniform torsion, based on Vlasov's theory. Additionally, the parametric analyses of similar members subjected to the uniform torsion, for the richer range of cross-sections have been carried out by the means of SOFiSTiK program. The purpose of the latter was determining parametrical formulas for calculation of the second moment of area of uniform torsion.

  2. The European legal framework regarding e-commercspan>e

    NARCIS (Netherlands)

    Schaub, M.Y.

    2004-01-01

    The year 2000 is a memorable year in the history of e-commercspan>e. This is the year of the so-called 'dot.com shake-out'. The year 2000 is also the year the European Union issued its e-commercspan>e directive. The directive means to regulate but also facilitate e-commercspan>e in the internal market, by laying

  3. 78 FR 54272 - Steel Wire Garment Hangers From China; Institution of a Five-Year Review

    Science.gov (United States)

    2013-09-03

    ... Commission defined a single Domestic Industry consisting of all domestic producers of steel wire garment... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1123 (Review)] Steel Wire Garment Hangers... the antidumping duty order on steel wire garment hangers from China would be likely to lead to...

  4. Experimental Study on Mechanical Behavior of Shear Connectors of Square Concrete Filled Steel Tube

    Directory of Open Access Journals (Sweden)

    Qiyun Qiao

    2017-08-01

    Full Text Available In order to quantitatively evaluate the shear-bearing capacity of shear connectors of square concrete filled steel tube (CFST, push-out tests on 14 square CFSTs with shear connectors have been carried out. Among the 14 CFSTs, there are 13 specimens with steel plate connectors and one specimen with steel bar connectors. The following factors are investigated to figure out their influences on the performance of CFSTs, which are the width to thickness ratio of steel tube, thickness of steel plate, length of steel plate, strength of concrete, welding condition of steel plate, number of steel plate layer and interlayer spacing. The test results show that the ultimate bearing capacity and the elastic stiffness increase with decreasing width to thickness ratio of the steel tube, and increasing thickness and length of the steel plate. With increasing concrete strength, the ultimate bearing capacity also increases. However, the welding condition has no effect on the ultimate bearing capacity. The ultimate bearing capacity of the CFST with double-layer steel plate is greater than that with single-layer steel plate. The ultimate bearing capacity of steel bar type shear connector is 87% greater than that of the steel plate type shear connector, and the steel bar specimen shows good ductility. A formula for calculating the shear-bearing capacity of shear connectors has been developed, and the calculated shear-bearing capacities are in good agreement with the test data.

  5. Negotiating and Spanning Boundaries in Offshore Outsourcing

    DEFF Research Database (Denmark)

    Sonne, Tine; Søderberg, Anne-Marie; Tøth, Thomas

    2013-01-01

    intercultural collaboration with managers and staff at the outsourcing client´s site. We also raise the question: Who and what motivates them to stay at work in this Indian IT development context where many Western clients have experienced serious challenges with outsourcing due to high attrition rates......? The single case is studied through company documents, semi-structured interviews with managers and employees from both the client and the vendor organizations, and participant observations of intercultural encounters. Since observations and interview accounts gave the impression that virtual team...

  6. The use of passwords to introduce theconcepts of spanning set and span

    Directory of Open Access Journals (Sweden)

    Andrea Cárcamo

    2017-01-01

    Full Text Available The aim of this paper is to present a proposal for teaching linear algebra based on heuristic of emergent models and mathematical modelling. This proposal begins with a problematic situation  related  to  the  creation  and  use  of  secure  passwords,  which  leads  first-year  students  of  engineering  toward  the  construction  of  the  concepts  of  spanning  set  and  span. The  proposal  is  designed  from  the  results  of  the  two  cycles  of  experimentation  teaching, design-based  research,  which  give  evidence  that  allows  students  to  progress  from  a  situation in a real context to the concepts of linear algebra. This proposal, previously adapted, could have similar results when applied to another group of students.

  7. The effects of dopamine on digit span in Parkinson's disease.

    Science.gov (United States)

    Warden, Clara; Hwang, Jaclyn; Marshall, Anisa; Fenesy, Michelle; Poston, Kathleen L

    2016-01-01

    Parkinson's disease patients are at an elevated risk of developing cognitive impairment. Although cognitive impairment is one of the strongest predictors of quality of life, dopaminergic anti-parkinsonian medications are designed to target motor symptoms. However, there is substantial evidence that dopamine also impacts cognition, in particular working memory. It is therefore critical for movement disorders physicians to understand the potential dopaminergic effects on working memory when prescribing these medications. Verbal digit span tasks offer a potentially straightforward and quick assessment of baseline working memory. Moreover, Digit Span Backward was recently validated as a screening tool for mild cognitive impairment in Parkinson's disease when participants were medicated. Research indicates that the interaction between dopamine and working memory follows an Inverted-U shaped curve, but the effect of dopamine on Digit Span has not been well studied. Our study seeks to: (1) determine the validity of verbal Digit Spans for detecting cognitive impairment in Parkinson's disease patients both ON and OFF medications; and (2) ascertain the effects of dopaminergic medications on verbal Digit Span. We recruited 64 Parkinson's disease patients and 22 age-and education-matched controls. Parkinson's patients completed Digit Span Backward and Digit Span Forward ON and OFF medications, while healthy controls completed them once. All participants were categorized by cognitive diagnosis using level-II consensus criteria. Digit Span Backward successfully identified mild cognitive impairment in Parkinson's disease, both ON and OFF medications. Combining patients with and without cognitive impairment, we found that dopamine significantly improved performance on Digit Span Backward, but not Forward. In a secondary analysis, we found this dopaminergic improvement was restricted to the Low baseline working memory group; the High baseline working memory group was unaffected

  8. Quantifying creativity: can measures span the spectrum?

    Science.gov (United States)

    Simonton, Dean Keith

    2012-03-01

    Because the cognitive neuroscientists have become increasingly interested in the phenomenon of creativity, the issue arises of how creativity is to be optimally measured. Unlike intelligence, which can be assessed across the full range of intellectual ability creativity measures tend to concentrate on different sections of the overall spectrum. After first defining creativity in terms of the three criteria of novelty, usefulness, and surprise, this article provides an overview of the available measures. Not only do these instruments vary according to whether they focus on the creative process, person, or product, but they differ regarding whether they tap into "little-c" versus "Big-C" creativity; only productivity and eminence measures reach into genius-level manifestations of the phenomenon. The article closes by discussing whether various alternative assessment techniques can be integrated into a single measure that quantifies creativity across the full spectrum.

  9. Developmental Dyslexia: The Visual Attention Span Deficit Hypothesis

    Science.gov (United States)

    Bosse, Marie-Line; Tainturier, Marie Josephe; Valdois, Sylviane

    2007-01-01

    The visual attention (VA) span is defined as the amount of distinct visual elements which can be processed in parallel in a multi-element array. Both recent empirical data and theoretical accounts suggest that a VA span deficit might contribute to developmental dyslexia, independently of a phonological disorder. In this study, this hypothesis was…

  10. 23 CFR 650.809 - Movable span bridges.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Movable span bridges. 650.809 Section 650.809 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Navigational Clearances for Bridges § 650.809 Movable span bridges. A fixed bridge...

  11. Paternal smoking habits affect the reproductive life span of daughters

    DEFF Research Database (Denmark)

    Fukuda, Misao; Fukuda, Kiyomi; Shimizu, Takashi

    2011-01-01

    The present study assessed whether the smoking habits of fathers around the time of conception affected the period in which daughters experienced menstrual cycles (i.e., the reproductive life span). The study revealed that the smoking habits of the farther shortened the daughters' reproductive life...... span compared with daughters whose fathers did not smoke....

  12. Increasing Endurance by Building Fluency: Precision Teaching Attention Span.

    Science.gov (United States)

    Binder, Carl; And Others

    1990-01-01

    Precision teaching techniques can be used to chart students' attention span or endurance. Individual differences in attention span can then be better understood and dealt with effectively. The effects of performance duration on performance level, on error rates, and on learning rates are discussed. Implications for classroom practice are noted.…

  13. Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

    Science.gov (United States)

    Dong, Hongying; Cao, Wanlin; Wu, Haipeng; Zhang, Jianwei; Xu, Fangfang

    2013-12-01

    A composite shear wall concept based on concrete filled steel tube (CFST) columns and steel plate (SP) deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements: CFST columns; SP deep beams; and reinforced concrete (RC) strips. The RC strips are intended to allow the core structural elements — the CFST columns and SP deep beams — to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

  14. Ultra clean steel for advanced linepipe applications

    Energy Technology Data Exchange (ETDEWEB)

    Bruckhaus, R.; Lachmund, H. [AG der Dillinger Huttenwerke, Dillingen (Germany)

    2005-07-01

    The grade of steel produced at the Dillinger Hutte (DH) steel plant in Germany ranges from regular to high strength structural steel for marine engineering, boiler making, crane construction and linepipe for offshore applications. In 2004, microalloyed steel grades represented nearly 66 per cent of the total production, while non alloyed graded steel had a share of 17 per cent, followed by 14 per cent for hydrogen-induced cracking (HIC) resistant steel grades for use in sour gas pipelines. Several major investments have been made at the DH steel plant since the late 1990s to guarantee the highest standard of production facilities. The main units in the plant are the hot metal desulphurization unit, two 185 t BOF converters, 3 ladle stirring and alloying units, 3 tank degassers and a single unit and twin vessel VOD. The BOF process has been optimized by a newly developed lime addition process and by variations in lance tip geometry. The 3 state-of-the-art VOD tank degassers at the DH steel plant make it possible to achieve the metallurgical requirements for low content sulphur, nitrogen and hydrogen. Three continuous vertical bending, solid core casting machines improve the already high levels of cleanliness. The vertical part assures maximum cleanliness after solidification and before bending. A 400 mm thick slab can be produced with model controlled dynamic soft reduction. The accurate alignment of the casters assures that segregation and microporosity are minimized. In addition, special cooling, bending and straightening methods are used to eliminate surface and internal cracks. 13 refs., 14 figs.

  15. Spanning trees in a fractal scale-free lattice

    Science.gov (United States)

    Zhang, Zhongzhi; Liu, Hongxiao; Wu, Bin; Zou, Tao

    2011-01-01

    Spanning trees provide crucial insight into the origin of fractality in fractal scale-free networks. In this paper, we present the number of spanning trees in a particular fractal scale-free lattice (network). We first study analytically the topological characteristics of the lattice and show that it is simultaneously scale-free, highly clustered, “large-world,” fractal, and disassortative. Any previous model does not have all the properties as the studied one. Then, by using the renormalization group technique we derive analytically the number of spanning trees in the network under consideration, based on which we also determine the entropy for the spanning trees of the network. These results shed light on understanding the structural characteristics of and dynamical processes on scale-free networks with fractality. Moreover, our method and process for employing the decimation technique to enumerate spanning trees are general and can be easily extended to other deterministic media with self-similarity.

  16. Power, Governance and Boundary Spanning Leadership in Public Sector Organisations

    DEFF Research Database (Denmark)

    Elmholdt, Claus Westergård; Fogsgaard, Morten

    2015-01-01

    The phenomenon of power and boundary spanning leadership in public sector organizations is the topic for the present workshop. In this workshop we present a practice perspective (Corradi, Gherardi and Verzelloni 2010) on the management of power and boundary spanning leadership. We will focus...... on the practice that evolves on the boundaries that span occupational groups, departments and organizations. The workshop takes it’s starting point in an interdisciplinary Scandinavian research project which deals with the question of how power processes can promote, or hinder, boundary spanning leadership...... in public sector organizations. This research project has, among other things, highlighted the ways in which boundary spanning leadership can be related to establishing a shared pool of actions, knowledge, communication, trust and identity in the organization. Furthermore, the research project stresses...

  17. Interaction model of steel ladle of continuous caster in steel works

    Directory of Open Access Journals (Sweden)

    Huang Bang Fu

    2016-01-01

    Full Text Available For further research on the precondition and interoperability model of interaction ladles among continuous caster, this article takes steel ladle of Y steel works as the object of research. On the basis of turnover number calculation model of single cast steel ladle, the relationship between cast number and the turnover number and turnover times and last turnover number are further analyzed. The simulation of steel ladle turnover rules was taken on the 2 continuous casters with Gantt chart. After that, the relationships between turnover number and last turnover number and non-turnover number are researched deeply. Combining with the Gantt chart, the expressions of start casting time and empty ladle ending time and heavy ladle starting time were put forward. The precondition of steel ladle interaction is obtained, which means the exchange ladle should not undertaking transport task in first stop continuous caster, and the empty ladle end time of exchange ladle of first stop continuous caster should early than the heavy ladle start time of last stop continuous caster. After applying the model to practice, 3 steel ladles of No.2 continuous caster can be reduced. This research results is supplying theoretical basis for steel ladle controlling and production organization optimization, and enriches the theory and method of metallurgical process integration.

  18. Measurements of residual deformations of steel-aluminum conductors in operating overhead lines

    Energy Technology Data Exchange (ETDEWEB)

    Durov, E.V.; Kesel' man, L.M.; Treiger, A.S.

    1982-12-01

    Experience in the operation of overhead power lines using steel-aluminum conductors is presented. Measurements were taken on the residual deformation of the steel-aluminum lines to determine the amount of sag increase and to forecast this increase for the entire period of operation. It is recommended that the work on measuring the residual deformation in the power lines be extended to a broader range of operating conditions such as conductors, spans, and climate conditions.

  19. Bilinear slack span calculation model. Slack span calculations for high-temperature cables; Bilineares Berechnungsmodell fuer Durchhangberechnungen. Durchhangberechnungen bei Hochtemperaturleitern

    Energy Technology Data Exchange (ETDEWEB)

    Scheel, Joerg; Dib, Ramzi [Fachhochschule Giessen-Friedberg, Friedberg (Germany); Sassmannshausen, Achim [DB Energie GmbH, Frankfurt (Main) (Germany). Arbeitsgebiet Bahnstromleitungen Energieerzeugungs- und Uebertragungssysteme; Riedl, Markus [Eon Netz GmbH, Bayreuth (Germany). Systemtechnik Leitungen

    2010-12-13

    Increasingly, high-temperature cables are used in high-voltage grids. Beyond a given temperature level, their slack span cannot be calculated accurately by conventional simple linear methods. The contribution investigates the behaviour of composite cables at high operating temperatures and its influence on the slack span and presents a more accurate, bilingual calculation method. (orig.)

  20. Malingering in Toxic Exposure. Classification Accuracy of Reliable Digit Span and WAIS-III Digit Span Scaled Scores

    Science.gov (United States)

    Greve, Kevin W.; Springer, Steven; Bianchini, Kevin J.; Black, F. William; Heinly, Matthew T.; Love, Jeffrey M.; Swift, Douglas A.; Ciota, Megan A.

    2007-01-01

    This study examined the sensitivity and false-positive error rate of reliable digit span (RDS) and the WAIS-III Digit Span (DS) scaled score in persons alleging toxic exposure and determined whether error rates differed from published rates in traumatic brain injury (TBI) and chronic pain (CP). Data were obtained from the files of 123 persons…

  1. Design and optimization of the large span dry-coal-shed latticed shell in Liyuan of Henan province

    Directory of Open Access Journals (Sweden)

    Du Wenfeng

    2017-01-01

    Full Text Available The design and optimization about the large span dry-coal-shed latticed shell in Liyuan of Henan province were studied. On the basis of the structural scheme of double-layer cylindrical reticulated shell, the optimization scheme of the folding double-layer cylindrical reticulated shell was proposed. Through the analysis of a plurality of calculation models, the optimal geometric parameters were obtained after discussing the influence of different slopes of folding lines and shell thickness on the structural bearing capacity and the amount of steel. The research results show that in the case of the same amount of steel, the ultimate bearing capacity of the double-layer folding cylindrical reticulated shell whose folding line slope is 9% and the shell thickness is about 4.4m can be increased 27.3% compared with the original design scheme.

  2. The reactor vessel steels

    International Nuclear Information System (INIS)

    Bilous, W.; Hajewska, E.; Szteke, W.; Przyborska, M.; Wasiak, J.; Wieczorkowski, M.

    2005-01-01

    In the paper the fundamental steels using in the construction of pressure vessel water reactor are discussed. The properties of these steels as well as the influence of neutron irradiation on its degradation in the time of exploitation are also done. (authors)

  3. Modern Steel Framed Schools.

    Science.gov (United States)

    American Inst. of Steel Construction, Inc., New York, NY.

    In view of the cost of structural framing for school buildings, ten steel-framed schools are examined to review the economical advantages of steel for school construction. These schools do not resemble each other in size, shape, arrangement or unit cost; some are original in concept and architecture, and others are conservative. Cost and…

  4. Ultrahigh Carbon Steel.

    Science.gov (United States)

    1984-10-01

    Wadsworth, "On the Bulat (Damascus Steels)", Bull. Metals Museum, 4 (1979), pp. 7-23. A 17...34 ’ ." ." ." . .’~.. ." .- .. . .. ,..-.. . . . . -. . . . . .’% ,d ,".. r~~; -W .- & .j2!* . * ~ (8) J. Wadsworth and 0. D. Sherby, "On the Bulat - Damascus Steels Re- visited", Prog. Mater. Sci., 25

  5. Effects of very low doses of ionizing radiation on the clonal life-span in Paramecium Tetraurelia

    International Nuclear Information System (INIS)

    Tixador, R.; Richoilley, G.; Monrozies, E.; Planel, H.; Tap, G.

    1981-01-01

    Effects of very low doses of ionizing radiation were investigated on life-span in Paramecium tetraurelia. After autogamy single cell cultures were placed (1) in a control chamber with radiopermeable walls; (2) in a shielding device with 10 cm thick lead walls; (3) in a similar shielding device including a 60 Co source giving a dose of 760 mrad per year at the culture level. Life-spans, expressed in days and in mean total number of fissions measured from autogamy to the death of all sublines, were about of 200 fissions and 55 days in controls. Life-spans of shielded sublines were increased and lower life-spans were observed in both shielded and irradiated sublines. These findings provide new evidence for a biological effect of very low doses of ionizing radiations and show that fission potential of Paramecium tetraurelia can be affected by variations in the background radiation level. (author)

  6. Tempo de reação simples auditivo e visual em surfistas com diferentes níveis de habilidade: comparação entre atletas profissionais, amadores e praticantes Auditory and visual single reaction span in surfers with different ability levels: comparison of professional, amateur athletes and surf practitioners

    Directory of Open Access Journals (Sweden)

    César Augusto Otero Vaghetti

    2007-04-01

    Full Text Available O tempo de reação simples (TRS representa o nível de coordenação neuromuscular, no qual os estímulos visuais, auditivos ou táteis são decodificados pelo corpo através de diferentes processos físico-químicos e mecânicos. O objetivo desta pesquisa foi identificar os TRS auditivo e visual em surfistas profissionais, amadores e praticantes, verificar se existem diferenças estatísticas entre os grupos de surfistas e correlacionar os tempos de reação com a performance dos atletas. Participaram deste estudo 103 surfistas: 42 atletas profissionais do sexo masculino (brasileiros e estrangeiros, 11 atletas profissionais do sexo feminino, 25 atletas amadores universitários e 25 praticantes de surfe. A coleta de dados foi realizada nas praias onde aconteceram os respectivos eventos, WQS (World Qualifyng Series, etapa do circuito mundial, Superfsurf (etapa do campeonato brasileiro de surfe profissional, CCSU (etapa do circuito catarinense de surfe universitário. Foram utilizados como instrumentação um interruptor com uma tecla de sensibilidade de 0,8N, um LED para estímulo visual, duas caixas acústicas, com 315Hz de freqüência e 81dB de pressão sonora, para estímulo auditivo e um dispositivo eletrônico com a finalidade de gerar o sinal auditivo, visual e de sincronismo. A aquisição dos dados foi realizada utilizando o software SAD versão 32. Foram encontradas diferenças estatisticamente significativas para os TRS auditivo e visual entre os profissionais (masculinos versus praticantes, profissionais (femininos versus praticantes. Entre os amadores versus praticantes foram encontradas diferenças estatisticamente significativas apenas para o TRS visual, com TRS menores para os mais experientes. Uma correlação positiva foi encontrada para o TRS visual entre os profissionais (femininos versus no ranking.The reaction span RS (RTS represents the level of neuromuscular coordination in which the visual, auditory or touch stimuli are

  7. Effects of visual span on reading speed and parafoveal processing in eye movements during sentence reading.

    Science.gov (United States)

    Risse, Sarah

    2014-07-15

    The visual span (or ‘‘uncrowded window’’), which limits the sensory information on each fixation, has been shown to determine reading speed in tasks involving rapid serial visual presentation of single words. The present study investigated whether this is also true for fixation durations during sentence reading when all words are presented at the same time and parafoveal preview of words prior to fixation typically reduces later word-recognition times. If so, a larger visual span may allow more efficient parafoveal processing and thus faster reading. In order to test this hypothesis, visual span profiles (VSPs) were collected from 60 participants and related to data from an eye-tracking reading experiment. The results confirmed a positive relationship between the readers’ VSPs and fixation-based reading speed. However, this relationship was not determined by parafoveal processing. There was no evidence that individual differences in VSPs predicted differences in parafoveal preview benefit. Nevertheless, preview benefit correlated with reading speed, suggesting an independent effect on oculomotor control during reading. In summary, the present results indicate a more complex relationship between the visual span, parafoveal processing, and reading speed than initially assumed. © 2014 ARVO.

  8. Caenorhabditis elegans Genes Affecting Interindividual Variation in Life-span Biomarker Gene Expression.

    Science.gov (United States)

    Mendenhall, Alexander; Crane, Matthew M; Tedesco, Patricia M; Johnson, Thomas E; Brent, Roger

    2017-10-01

    Genetically identical organisms grown in homogenous environments differ in quantitative phenotypes. Differences in one such trait, expression of a single biomarker gene, can identify isogenic cells or organisms that later manifest different fates. For example, in isogenic populations of young adult Caenorhabditis elegans, differences in Green Fluorescent Protein (GFP) expressed from the hsp-16.2 promoter predict differences in life span. Thus, it is of interest to determine how interindividual differences in biomarker gene expression arise. Prior reports showed that the thermosensory neurons and insulin signaling systems controlled the magnitude of the heat shock response, including absolute expression of hsp-16.2. Here, we tested whether these regulatory signals might also influence variation in hsp-16.2 reporter expression. Genetic experiments showed that the action of AFD thermosensory neurons increases interindividual variation in biomarker expression. Further genetic experimentation showed the insulin signaling system acts to decrease interindividual variation in life-span biomarker expression; in other words, insulin signaling canalizes expression of the hsp-16.2-driven life-span biomarker. Our results show that specific signaling systems regulate not only expression level, but also the amount of interindividual expression variation for a life-span biomarker gene. They raise the possibility that manipulation of these systems might offer means to reduce heterogeneity in the aging process. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Dyslexia in a French-Spanish bilingual girl: behavioural and neural modulations following a visual attention span intervention.

    Science.gov (United States)

    Valdois, Sylviane; Peyrin, Carole; Lassus-Sangosse, Delphine; Lallier, Marie; Démonet, Jean-François; Kandel, Sonia

    2014-04-01

    We report the case study of a French-Spanish bilingual dyslexic girl, MP, who exhibited a severe visual attention (VA) span deficit but preserved phonological skills. Behavioural investigation showed a severe reduction of reading speed for both single items (words and pseudo-words) and texts in the two languages. However, performance was more affected in French than in Spanish. MP was administered an intensive VA span intervention programme. Pre-post intervention comparison revealed a positive effect of intervention on her VA span abilities. The intervention further transferred to reading. It primarily resulted in faster identification of the regular and irregular words in French. The effect of intervention was rather modest in Spanish that only showed a tendency for faster word reading. Text reading improved in the two languages with a stronger effect in French but pseudo-word reading did not improve in either French or Spanish. The overall results suggest that VA span intervention may primarily enhance the fast global reading procedure, with stronger effects in French than in Spanish. MP underwent two fMRI sessions to explore her brain activations before and after VA span training. Prior to the intervention, fMRI assessment showed that the striate and extrastriate visual cortices alone were activated but none of the regions typically involved in VA span. Post-training fMRI revealed increased activation of the superior and inferior parietal cortices. Comparison of pre- and post-training activations revealed significant activation increase of the superior parietal lobes (BA 7) bilaterally. Thus, we show that a specific VA span intervention not only modulates reading performance but further results in increased brain activity within the superior parietal lobes known to housing VA span abilities. Furthermore, positive effects of VA span intervention on reading suggest that the ability to process multiple visual elements simultaneously is one cause of successful

  10. The effects of steel fibre reinforced concrete on system ductility

    Directory of Open Access Journals (Sweden)

    Yilmaz, U. S.

    2007-03-01

    Full Text Available Steel fibre-reinforced concrete is being used extensively today in both field applications and experimental studies on concrete strength and ductility. The state of passive confinement generated by the fibre delays cracking and enhances ductility. The present paper reports on both experimental and analytical studies. In the former, a series of 16 steel-fibre reinforced concrete prismatic specimens were subjected to axial loads and the respective axial load-unit strain diagrams were subsequently plotted to determine the effect of steel fibres on reinforced concrete column ductility. Secondly, an analytical study was run to determine the additional ductility accruing to a frame system when steel fibres are included in the concrete. Analytical models were generated for 16 two-storey, single-span reinforced concrete frames. The columns in these frames were designed to the same characteristics as the specimens used in the experimental tests. Non-linear static (pushover analyses were performed for each frame to obtain load-displacement curves and determine the effect of steel fibres on reinforced concrete column ductility.El hormigón reforzado con fibra de acero se emplea actualmente tanto en obra como en los trabajos experimentales para estudiar la resistencia mecánica y ductilidad del hormigón. El estado de confinamiento pasivo producido por la fibra retrasa la fisuración y aumenta la ductilidad. El presente trabajo es de índole tanto experimental como analítica. En primer lugar, en la parte experimental se aplica una fuerza axial a 16 probetas prismáticas (160 x 160 x 840 mm de hormigón reforzado con fibra de acero para determinar su comportamiento, obteniéndose las curvas de fuerza axial-deformación unitaria correspondientes a partir de los resultados observados. A partir de una evaluación de dichos resultados experimentales, se determina el efecto que ejercen las fibras de acero sobre la ductilidad de las probetas de hormigón armado

  11. Stiffness of Railway Soil-Steel Structures

    Directory of Open Access Journals (Sweden)

    Machelski Czesław

    2015-12-01

    Full Text Available The considerable influence of the soil backfill properties and that of the method of compacting it on the stiffness of soil-steel structures is characteristic of the latter. The above factors (exhibiting randomness become apparent in shell deformation measurements conducted during construction and proof test loading. A definition of soil-shell structure stiffness, calculated on the basis of shell deflection under the service load, is proposed in the paper. It is demonstrated that the stiffness is the inverse of the deflection influence function used in structural mechanics. The moving load methodology is shown to be useful for testing, since it makes it possible to map the shell deflection influence line also in the case of group loads (concentrated forces, as in bridges. The analyzed cases show that the shell’s span, geometry (static scheme and the height of earth fill influence the stiffness of the structure. The soil-steel structure’s characteristic parameter in the form of stiffness k is more suitable for assessing the quality of construction works than the proposed in code geometric index ω applied to beam structures. As shown in the given examples, parameter k is more effective than stiffness parameter λ used to estimate the deformation of soil-steel structures under construction. Although the examples concern railway structures, the methodology proposed in the paper is suitable also for road bridges.

  12. USING GENETIC ALGORTIHM TO SOLVE STEINER MINIMUM SPANNING TREE PROBLEM

    Directory of Open Access Journals (Sweden)

    Öznur İŞÇİ

    2006-03-01

    Full Text Available Genetic algorithms (GA are a stochastic research methods, and they produce solutions that are close to optimum or near optimum. In addition to GA's successful application to traveling salesman problem, square designation, allocation, workshop table, preparation of lesson/examination schedules, planning of communication networks, assembling line balanced, minimum spanning tree type many combinatorial optimization problems it would be applicable to make the best comparison in optimization. In this study a Java program is developed to solve Steiner minimum spanning tree problem by genetic algorithm and its performance is examined. According to the tests carried out on the problems that were given before in the literature, results that are close to optimum are obtained in by GA approach that is recommended in this study. For the predetermined points in the study, length and gain are calculated for Steiner minimum spanning tree problem and minimum spanning tree problem.

  13. Long span cable supported bridges - present technology and trends

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues into the ...... into the next century, further developments are required to ensure that the bridges will be stable, durable and constructible.......The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues...

  14. Additively manufactured hierarchical stainless steels with high strength and ductility

    Science.gov (United States)

    Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T.; Ye, Jianchao; Calta, Nicholas P.; Li, Zan; Zeng, Zhi; Zhang, Yin; Chen, Wen; Roehling, Tien Tran; Ott, Ryan T.; Santala, Melissa K.; Depond, Philip J.; Matthews, Manyalibo J.; Hamza, Alex V.; Zhu, Ting

    2018-01-01

    Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength-ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensile ductility that surpasses that of conventional 316L steels. High strength is attributed to solidification-enabled cellular structures, low-angle grain boundaries, and dislocations formed during manufacturing, while high uniform elongation correlates to a steady and progressive work-hardening mechanism regulated by a hierarchically heterogeneous microstructure, with length scales spanning nearly six orders of magnitude. In addition, solute segregation along cellular walls and low-angle grain boundaries can enhance dislocation pinning and promote twinning. This work demonstrates the potential of additive manufacturing to create alloys with unique microstructures and high performance for structural applications.

  15. From elongated spanning trees to vicious random walks

    OpenAIRE

    Gorsky, A.; Nechaev, S.; Poghosyan, V. S.; Priezzhev, V. B.

    2012-01-01

    Given a spanning forest on a large square lattice, we consider by combinatorial methods a correlation function of $k$ paths ($k$ is odd) along branches of trees or, equivalently, $k$ loop--erased random walks. Starting and ending points of the paths are grouped in a fashion a $k$--leg watermelon. For large distance $r$ between groups of starting and ending points, the ratio of the number of watermelon configurations to the total number of spanning trees behaves as $r^{-\

  16. Life Span Exercise Among Elite Intercollegiate Student Athletes

    OpenAIRE

    Sorenson, Shawn C.; Romano, Russell; Azen, Stanley P.; Schroeder, E. Todd; Salem, George J.

    2015-01-01

    Background: Despite prominent public attention, data on life span health and exercise outcomes among elite, competitive athletes are sparse and do not reflect the diversity of modern athletes. Hypothesis: Life span exercise behavior differs between National Collegiate Athletic Association (NCAA) student athletes and a nonathlete control group. Sustained exercise is associated with improved cardiopulmonary health outcomes. Study Design: Cross-sectional, descriptive epidemiology study. Level of...

  17. A Minimum Spanning Tree Representation of Anime Similarities

    OpenAIRE

    Wibowo, Canggih Puspo

    2016-01-01

    In this work, a new way to represent Japanese animation (anime) is presented. We applied a minimum spanning tree to show the relation between anime. The distance between anime is calculated through three similarity measurements, namely crew, score histogram, and topic similarities. Finally, the centralities are also computed to reveal the most significance anime. The result shows that the minimum spanning tree can be used to determine the similarity anime. Furthermore, by using centralities c...

  18. Facilitating conditions for boundary-spanning behavior in governance networks

    OpenAIRE

    Meerkerk, Ingmar; Edelenbos, Jurian

    2017-01-01

    textabstractThis article examines the impact of two facilitating conditions for boundary-spanning behaviour in urban governance networks. While research on boundary spanning is growing, there is little attention for antecedents. Combining governance network literature on project management and organizational literature on facilitative and servant leadership, we examine two potential conditions: a facilitative project management style and executive support. We conducted survey research among p...

  19. Paternal smoking habits affect the reproductive life span of daughters.

    Science.gov (United States)

    Fukuda, Misao; Fukuda, Kiyomi; Shimizu, Takashi; Nobunaga, Miho; Andersen, Elisabeth Wreford; Byskov, Anne Grete; Andersen, Claus Yding

    2011-06-30

    The present study assessed whether the smoking habits of fathers around the time of conception affected the period in which daughters experienced menstrual cycles (i.e., the reproductive life span). The study revealed that the smoking habits of the farther shortened the daughters' reproductive life span compared with daughters whose fathers did not smoke. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  20. On the number of spanning trees in random regular graphs

    DEFF Research Database (Denmark)

    Greenhill, Catherine; Kwan, Matthew; Wind, David Kofoed

    2014-01-01

    Let d >= 3 be a fixed integer. We give an asympotic formula for the expected number of spanning trees in a uniformly random d-regular graph with n vertices. (The asymptotics are as n -> infinity, restricted to even n if d is odd.) We also obtain the asymptotic distribution of the number of spanning...... trees in a uniformly random cubic graph, and conjecture that the corresponding result holds for arbitrary (fixed) d. Numerical evidence is presented which supports our conjecture....

  1. Design of steel cylindrical tanks

    OpenAIRE

    Hlastec, Jan

    2012-01-01

    The thesis deals with the area of steel shell structures. Presented is the design process of steel cylindrical tanks using Eurocode standards. I dealt with the plastic limit states and stability limit state of steel shell structures. A program for the calculation of cylindrical steel tanks for the limit state of strength and stability is made in Matlab. The focus of this work is on understanding the design process of cylindrical steel tanks and creating a computer program in Matlab. Create...

  2. Parafoveal magnification: visual acuity does not modulate the perceptual span in reading.

    Science.gov (United States)

    Miellet, Sébastien; O'Donnell, Patrick J; Sereno, Sara C

    2009-06-01

    Models of eye guidance in reading rely on the concept of the perceptual span-the amount of information perceived during a single eye fixation, which is considered to be a consequence of visual and attentional constraints. To directly investigate attentional mechanisms underlying the perceptual span, we implemented a new reading paradigm-parafoveal magnification (PM)-that compensates for how visual acuity drops off as a function of retinal eccentricity. On each fixation and in real time, parafoveal text is magnified to equalize its perceptual impact with that of concurrent foveal text. Experiment 1 demonstrated that PM does not increase the amount of text that is processed, supporting an attentional-based account of eye movements in reading. Experiment 2 explored a contentious issue that differentiates competing models of eye movement control and showed that, even when parafoveal information is enlarged, visual attention in reading is allocated in a serial fashion from word to word.

  3. The Effects of Visual Attention Span and Phonological Decoding in Reading Comprehension in Dyslexia: A Path Analysis.

    Science.gov (United States)

    Chen, Chen; Schneps, Matthew H; Masyn, Katherine E; Thomson, Jennifer M

    2016-11-01

    Increasing evidence has shown visual attention span to be a factor, distinct from phonological skills, that explains single-word identification (pseudo-word/word reading) performance in dyslexia. Yet, little is known about how well visual attention span explains text comprehension. Observing reading comprehension in a sample of 105 high school students with dyslexia, we used a pathway analysis to examine the direct and indirect path between visual attention span and reading comprehension while controlling for other factors such as phonological awareness, letter identification, short-term memory, IQ and age. Integrating phonemic decoding efficiency skills in the analytic model, this study aimed to disentangle how visual attention span and phonological skills work together in reading comprehension for readers with dyslexia. We found visual attention span to have a significant direct effect on more difficult reading comprehension but not on an easier level. It also had a significant direct effect on pseudo-word identification but not on word identification. In addition, we found that visual attention span indirectly explains reading comprehension through pseudo-word reading and word reading skills. This study supports the hypothesis that at least part of the dyslexic profile can be explained by visual attention abilities. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  4. Glass Stronger than Steel

    Science.gov (United States)

    Yarris, Lynn

    2011-03-28

    A new type of damage-tolerant metallic glass, demonstrating a strength and toughness beyond that of steel or any other known material, has been developed and tested by a collaboration of researchers from Berkeley Lab and Caltech.

  5. Structural amorphous steels

    International Nuclear Information System (INIS)

    Lu, Z.P.; Liu, C.T.; Porter, W.D.; Thompson, J.R.

    2004-01-01

    Recent advancement in bulk metallic glasses, whose properties are usually superior to their crystalline counterparts, has stimulated great interest in fabricating bulk amorphous steels. While a great deal of effort has been devoted to this field, the fabrication of structural amorphous steels with large cross sections has remained an alchemist's dream because of the limited glass-forming ability (GFA) of these materials. Here we report the discovery of structural amorphous steels that can be cast into glasses with large cross-section sizes using conventional drop-casting methods. These new steels showed interesting physical, magnetic, and mechanical properties, along with high thermal stability. The underlying mechanisms for the superior GFA of these materials are discussed

  6. Steel Strapping Evaluation

    National Research Council Canada - National Science Library

    Haas, Bradley

    1996-01-01

    ... (ARDEC) to perform salt-fog accelerated-aging testing on 1 - 1/4-inch steel strapping to determine whether Delta, style III, painted seals are a suitable alternative to currently utilized seals...

  7. Metallurgy: Printing steels

    Science.gov (United States)

    Todd, Iain

    2018-01-01

    Additive manufacturing has been used to fabricate a common stainless steel, which imparts a unique microstructure to this material, making it stronger and more ductile than that produced with conventional methods.

  8. Life span extension and neuronal cell protection by Drosophila nicotinamidase.

    Science.gov (United States)

    Balan, Vitaly; Miller, Gregory S; Kaplun, Ludmila; Balan, Karina; Chong, Zhao-Zhong; Li, Faqi; Kaplun, Alexander; VanBerkum, Mark F A; Arking, Robert; Freeman, D Carl; Maiese, Kenneth; Tzivion, Guri

    2008-10-10

    The life span of model organisms can be modulated by environmental conditions that influence cellular metabolism, oxidation, or DNA integrity. The yeast nicotinamidase gene pnc1 was identified as a key transcriptional target and mediator of calorie restriction and stress-induced life span extension. PNC1 is thought to exert its effect on yeast life span by modulating cellular nicotinamide and NAD levels, resulting in increased activity of Sir2 family class III histone deacetylases. In Caenorhabditis elegans, knockdown of a pnc1 homolog was shown recently to shorten the worm life span, whereas its overexpression increased survival under conditions of oxidative stress. The function and regulation of nicotinamidases in higher organisms has not been determined. Here, we report the identification and biochemical characterization of the Drosophila nicotinamidase, D-NAAM, and demonstrate that its overexpression significantly increases median and maximal fly life span. The life span extension was reversed in Sir2 mutant flies, suggesting Sir2 dependence. Testing for physiological effectors of D-NAAM in Drosophila S2 cells, we identified oxidative stress as a primary regulator, both at the transcription level and protein activity. In contrast to the yeast model, stress factors such as high osmolarity and heat shock, calorie restriction, or inhibitors of TOR and phosphatidylinositol 3-kinase pathways do not appear to regulate D-NAAM in S2 cells. Interestingly, the expression of D-NAAM in human neuronal cells conferred protection from oxidative stress-induced cell death in a sirtuin-dependent manner. Together, our findings establish a life span extending the ability of nicotinamidase in flies and offer a role for nicotinamide-modulating genes in oxidative stress regulated pathways influencing longevity and neuronal cell survival.

  9. Life after Steel

    Science.gov (United States)

    Mangan, Katherine

    2013-01-01

    Bobby Curran grew up in a working-class neighborhood in Baltimore, finished high school, and followed his grandfather's steel-toed bootprints straight to Sparrows Point, a 3,000-acre sprawl of industry on the Chesapeake Bay. College was not part of the plan. A gritty but well-paying job at the RG Steel plant was Mr. Curran's ticket to a secure…

  10. High Nitrogen Stainless Steel

    Science.gov (United States)

    2011-07-19

    crack growth (FCG) test (ASTM E 647-95a) - square bar specimen of 0.4x0.4x2.8 in. in L-orientation with a Charpy notch at the mid- length for SCC...Hydrogen Embrittlement in Steel by the Increment Loading Technique. Fractography: After the stress-life fatigue tests , the fracture surface morphology...NAWCADPAX/TR-2011/162 HIGH NITROGEN STAINLESS STEEL by E. U. Lee R. Taylor 19 July 2011 Approved for

  11. Ferrium M54 Steel

    Science.gov (United States)

    2015-03-18

    coated specimens of Ferrium M54 steel were subjected to electrochemical measurement, microstructure examination, mechanical testing in air, fatigue...counsel on fatigue crack growth testing . NAWCADPAX/TIM-2014/292 1 INTRODUCTION High strength steels developed in the 1940’s and 1950’s... Charpy notch at the mid-length for SCC test under four-point bending (ASTM F 1624) - flat plate specimen of 4 x 4 x 1/8 in. for electrochemical

  12. Individual differences in personality change across the adult life span.

    Science.gov (United States)

    Schwaba, Ted; Bleidorn, Wiebke

    2017-05-16

    A precise and comprehensive description of personality continuity and change across the life span is the bedrock upon which theories of personality development are built. Little research has quantified the degree to which individuals deviate from mean-level developmental trends. In this study, we addressed this gap by examining individual differences in personality trait change across the life span. Data came from a nationally representative sample of 9,636 Dutch participants who provided Big Five self-reports at five assessment waves across 7 years. We divided our sample into 14 age groups (ages 16-84 at initial measurement) and estimated latent growth curve models to describe individual differences in personality change across the study period for each trait and age group. Across the adult life span, individual differences in personality change were small but significant until old age. For Openness, Conscientiousness, Extraversion, and Agreeableness, individual differences in change were most pronounced in emerging adulthood and decreased throughout midlife and old age. For Emotional Stability, individual differences in change were relatively consistent across the life span. These results inform theories of life span development and provide future directions for research on the causes and conditions of personality change. © 2017 Wiley Periodicals, Inc.

  13. Radiation effects on life span in Caenorhabditis elegans

    International Nuclear Information System (INIS)

    Johnson, T.E.; Hartman, P.S.

    1988-01-01

    Wild-type and radiation-sensitive (Rad) mutants of Caenorhabditis elegans were irradiated using a 137 Cs source (2.7 krads/min.) at several developmental stages and subsequently monitored for life span. Acute doses of radiation ranged from 1 krad to 300 krads. All stages required doses above 100 krads to reduce mean life span. Dauers and third stage larvae were more sensitive, and 8-day-old adults were the most resistant. Occasional statistically significant but nonrepeatable increases in survival were observed after intermediate levels of irradiation (10-30 krads). Unirradiated rad-4 and rad-7 had life spans similar to wild-type; all others had a significant reduction in survival. The mutants were about as sensitive as wild-type to the effects of ionizing radiation including occasional moderate life span extensions at intermediate doses. We conclude that the moderate life span extensions sometimes observed after irradiation are likely to be mediated by a means other than the induction of DNA repair enzymes

  14. Articles comprising ferritic stainless steels

    Science.gov (United States)

    Rakowski, James M.

    2016-06-28

    An article of manufacture comprises a ferritic stainless steel that includes a near-surface region depleted of silicon relative to a remainder of the ferritic stainless steel. The article has a reduced tendency to form an electrically resistive silica layer including silicon derived from the steel when the article is subjected to high temperature oxidizing conditions. The ferritic stainless steel is selected from the group comprising AISI Type 430 stainless steel, AISI Type 439 stainless steel, AISI Type 441 stainless steel, AISI Type 444 stainless steel, and E-BRITE.RTM. alloy, also known as UNS 44627 stainless steel. In certain embodiments, the article of manufacture is a fuel cell interconnect for a solid oxide fuel cell.

  15. Minimum spanning trees and random resistor networks in d dimensions.

    Science.gov (United States)

    Read, N

    2005-09-01

    We consider minimum-cost spanning trees, both in lattice and Euclidean models, in d dimensions. For the cost of the optimum tree in a box of size L , we show that there is a correction of order L(theta) , where theta or =1 . The arguments all rely on the close relation of Kruskal's greedy algorithm for the minimum spanning tree, percolation, and (for some arguments) random resistor networks. The scaling of the entropy and free energy at small nonzero T , and hence of the number of near-optimal solutions, is also discussed. We suggest that the Steiner tree problem is in the same universality class as the minimum spanning tree in all dimensions, as is the traveling salesman problem in two dimensions. Hence all will have the same value of theta=-3/4 in two dimensions.

  16. From elongated spanning trees to vicious random walks

    Science.gov (United States)

    Gorsky, A.; Nechaev, S.; Poghosyan, V. S.; Priezzhev, V. B.

    2013-05-01

    Given a spanning forest on a large square lattice, we consider by combinatorial methods a correlation function of k paths (k is odd) along branches of trees or, equivalently, k loop-erased random walks. Starting and ending points of the paths are grouped such that they form a k-leg watermelon. For large distance r between groups of starting and ending points, the ratio of the number of watermelon configurations to the total number of spanning trees behaves as r-ν log r with ν = (k2 - 1) / 2. Considering the spanning forest stretched along the meridian of this watermelon, we show that the two-dimensional k-leg loop-erased watermelon exponent ν is converting into the scaling exponent for the reunion probability (at a given point) of k (1 + 1)-dimensional vicious walkers, ν˜ =k2 / 2. At the end, we express the conjectures about the possible relation to integrable systems.

  17. Approximate hydrodynamic design of a finite span hydrofoil

    Science.gov (United States)

    Vladimirov, A N

    1955-01-01

    Previous work on the motion of various bodies under the surface of a heavy fluid is discussed. The solution of the motion of a flat plate by Keldysh and Lavrentiev is applied to the motion of a hydrofoil, making possible the presentation of charts for determining the lift and resistance of an infinite span hydrofoil operating in a heavy frictionless fluid having infinite depth below the free water surface. Consideration is given to the effects of viscosity and a method is suggested to correct for the finite span. The effect of the water surface on the downwash behind the foil is also discussed. A comparison of theoretical results obtained from this work with experimental data indicates that a basis for the approximate hydrodynamic design of a finite span hydrofoil has been achieved.

  18. Seismic Performance of Multi-Span RC Railway Bridges

    DEFF Research Database (Denmark)

    Georgakis, Christos; Barrau, Xavier

    2008-01-01

    Presently, there is no clear method for determining the optimal railway bridge design for a particular ground type and expected seismic intensity. Four main types of RC bridge dominate the current multi-span railway bridge design trends – the Simply Supported Beam, Continuous Box-Girder (CBG), CBG...... with Lead Rubber Bearing (LRB) supports and the laterally fixed continuous deck (CRB) with LRBs. In this paper, the seismic performance of these four types is examined for varying ground types and seismic intensities. For the purposes of comparison, all of the bridges have five spans with identical span...... lengths and topography. Initially, typical bridge deck, pier and bearing configurations are chosen and analyzed through a series of nonlinear time-history analyses using synthetic accelerograms, in which plastic hinge formation is permitted. Next, an optimization of the bridge configurations is undertaken...

  19. Effects of Posttensioning Slippage on 2-Way Spanning Concrete Slabs

    Directory of Open Access Journals (Sweden)

    Niall Holmes

    2015-01-01

    Full Text Available This paper investigates the effect of improper posttensioning of a 2-way spanning concrete slab subject to a central point load. Due to plate slippage alone, the support conditions only offered a 1-way spanning action which could have led to premature failure with dangerous consequences. Posttensioning can strengthen a flat slab against punching shear by controlling deflections and cracking under service loads compared with traditional punching shear reinforcing methods leading to more slender structures and economic solutions for longer spans. However, if the method is not properly applied, these thinner floor plates can fail in a brittle and sudden manner by punching at ultimate limit state and excessive deflection in serviceability. Concrete slabs containing traditional shear reinforcement performed adequately and demonstrated that the critical punching shear perimeter, defined as twice the depth of the slab, was confirmed from measured deflections and crack pattern analysis.

  20. From elongated spanning trees to vicious random walks

    International Nuclear Information System (INIS)

    Gorsky, A.; Nechaev, S.; Poghosyan, V.S.; Priezzhev, V.B.

    2013-01-01

    Given a spanning forest on a large square lattice, we consider by combinatorial methods a correlation function of k paths (k is odd) along branches of trees or, equivalently, k loop-erased random walks. Starting and ending points of the paths are grouped such that they form a k-leg watermelon. For large distance r between groups of starting and ending points, the ratio of the number of watermelon configurations to the total number of spanning trees behaves as r −ν logr with ν=(k 2 −1)/2. Considering the spanning forest stretched along the meridian of this watermelon, we show that the two-dimensional k-leg loop-erased watermelon exponent ν is converting into the scaling exponent for the reunion probability (at a given point) of k(1+1)-dimensional vicious walkers, ν -tilde= k 2 /2. At the end, we express the conjectures about the possible relation to integrable systems

  1. 2-D image segmentation using minimum spanning trees

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Y.; Uberbacher, E.C.

    1995-09-01

    This paper presents a new algorithm for partitioning a gray-level image into connected homogeneous regions. The novelty of this algorithm lies in the fact that by constructing a minimum spanning tree representation of a gray-level image, it reduces a region partitioning problem to a minimum spanning tree partitioning problem, and hence reduces the computational complexity of the region partitioning problem. The tree-partitioning algorithm, in essence, partitions a minimum spanning tree into subtrees, representing different homogeneous regions, by minimizing the sum of variations of gray levels over all subtrees under the constraints that each subtree should have at least a specified number of nodes, and two adjacent subtrees should have significantly different average gray-levels. Two (faster) heuristic implementations are also given for large-scale region partitioning problems. Test results have shown that the segmentation results are satisfactory and insensitive to noise.

  2. Management of the Space Physics Analysis Network (SPAN)

    Science.gov (United States)

    Green, James L.; Thomas, Valerie L.; Butler, Todd F.; Peters, David J.; Sisson, Patricia L.

    1990-01-01

    Here, the purpose is to define the operational management structure and to delineate the responsibilities of key Space Physics Analysis Network (SPAN) individuals. The management structure must take into account the large NASA and ESA science research community by giving them a major voice in the operation of the system. Appropriate NASA and ESA interfaces must be provided so that there will be adequate communications facilities available when needed. Responsibilities are delineated for the Advisory Committee, the Steering Committee, the Project Scientist, the Project Manager, the SPAN Security Manager, the Internetwork Manager, the Network Operations Manager, the Remote Site Manager, and others.

  3. Adaptive prolonged postreproductive life span in killer whales.

    Science.gov (United States)

    Foster, Emma A; Franks, Daniel W; Mazzi, Sonia; Darden, Safi K; Balcomb, Ken C; Ford, John K B; Croft, Darren P

    2012-09-14

    Prolonged life after reproduction is difficult to explain evolutionarily unless it arises as a physiological side effect of increased longevity or it benefits related individuals (i.e., increases inclusive fitness). There is little evidence that postreproductive life spans are adaptive in nonhuman animals. By using multigenerational records for two killer whale (Orcinus orca) populations in which females can live for decades after their final parturition, we show that postreproductive mothers increase the survival of offspring, particularly their older male offspring. This finding may explain why female killer whales have evolved the longest postreproductive life span of all nonhuman animals.

  4. Life-Cycle Monitoring of Long-Span PSC Box Girder Bridges through Distributed Sensor Network: Strategies, Methods, and Applications

    Directory of Open Access Journals (Sweden)

    Zheheng Chen

    2015-01-01

    Full Text Available Structural health monitoring (SHM has attracted much attention in recent years, which enables early warnings of structural failure, condition assessments, and rational maintenance/repair strategies. In the context of bridges, many long-span steel bridges in China have been installed with the SHM systems; however, the applications of the SHM in prestressed concrete (PSC bridges are still rather limited. On the other hand, the PSC box girder bridges are extensively used in highway and railway systems and premature damage of these bridges is often reported, resulting in considerable maintenance and/or replacement costs. First, this paper presents a state-of-art review on the SHM of long-span PSC bridges. Monitoring strategies, methods, and previous applications for these bridges are summarized and discussed. In order to well capture the behavior of the bridge during its whole life and to maximize the use of sensors, a life-cycle monitoring strategy is proposed, in which the sensor layout is determined according to requirements for construction monitoring, completion test, and in-service monitoring. A case study is made on a three-span PSC box girder bridge in China. The system configuration, sensor layout, and data communications, and so forth, are presented. The up-to-date monitored structural responses are analyzed and compared with the design values.

  5. Steel bridges structural health monitoring based on operational modal analysis accommodating evaluation of uncertainty

    Directory of Open Access Journals (Sweden)

    Saeid Jahan

    2017-11-01

    Full Text Available Structural damage detection is based on that the dynamic response of structure will change because of damage. Hence, it is possible to estimate the location and severity of damage leads to changes in the dynamic response before and after the damage. In this study, the genetic fuzzy system has been used for bridge structural health monitoring. A key objective of using genetic algorithms is to automate the design of fuzzy systems. This method is used for damage detection of a single span railway bridge with steel girders and a concrete bridge. For studying damage detection, the numerical models of these two bridges are built with the measured dynamic characteristics. A three-dimensional finite element model and a single two-dimensional girders model of the bridge have been constructed to study usefulness of the genetic fuzzy system for damage detection and the effectiveness of modeling. After analysis to control the uncertainties, the measured frequencies are contaminated with some noise and the effect of that on the achievement of damage detection method is evaluated. The present study has shown that the natural frequency has appropriate sensitivity to different damage scenarios in the structure. In addition, the natural frequency in comparison with other modal parameters, is less affected by random noise. Increasing the number of measurement modes and using torsional modes, will lead to an accurate damage diagnosis even in symmetrical structures.

  6. Steel fiber reinforced concrete

    International Nuclear Information System (INIS)

    Baloch, S.U.

    2005-01-01

    Steel-Fiber Reinforced Concrete is constructed by adding short fibers of small cross-sectional size .to the fresh concrete. These fibers reinforce the concrete in all directions, as they are randomly oriented. The improved mechanical properties of concrete include ductility, impact-resistance, compressive, tensile and flexural strength and abrasion-resistance. These uniqlte properties of the fiber- reinforcement can be exploited to great advantage in concrete structural members containing both conventional bar-reinforcement and steel fibers. The improvements in mechanical properties of cementitious materials resulting from steel-fiber reinforcement depend on the type, geometry, volume fraction and material-properties of fibers, the matrix mix proportions and the fiber-matrix interfacial bond characteristics. Effects of steel fibers on the mechanical properties of concrete have been investigated in this paper through a comprehensive testing-programme, by varying the fiber volume fraction and the aspect-ratio (Lid) of fibers. Significant improvements are observed in compressive, tensile, flexural strength and impact-resistance of concrete, accompanied by marked improvement in ductility. optimum fiber-volume fraction and aspect-ratio of steel fibers is identified. Test results are analyzed in details and relevant conclusions drawn. The research is finally concluded with future research needs. (author)

  7. Determination of the cost of worker reproduction via diminished life span in the ant Diacamma sp.

    Science.gov (United States)

    Tsuji, Kazuki; Kikuta, Noritsugu; Kikuchi, Tomonori

    2012-05-01

    Workers of social Hymenoptera can usually produce male offspring, but rarely do so in the presence of a queen despite the potential individual fitness benefit. Various mechanisms have been hypothesized to regulate worker reproduction, including avoiding the colony-level cost of worker reproduction. However, firm quantitative evidence is lacking to support that hypothesis. Here, we accurately quantified this cost by studying an ant species (Diacamma sp.) in which worker reproduction is rare in the presence of the gamergate (the functional queen). A series of experiments to manipulate worker-gamergate contact revealed that short-term brood-production efficiency is not changed by the presence of worker reproduction. However, when workers reproduce, their average life span is reduced to between 74% and 88% of that in the absence of reproduction, indicating a long-term cost to the colony. In theory, this cost can explain the policing of worker reproduction under a queen-single mating system, but the cost does not appear to be high enough to stop worker reproduction. When contact with the gamergate is lost, it is only the nonreproductive workers whose life span was reduced; the reproductive workers lived as long as nonorphaned workers. We suggest that an increased workload can account for the reduction in life span better than a trade-off between reproduction and longevity. © 2011 The Author(s). Evolution© 2011 The Society for the Study of Evolution.

  8. Wide-angle NSE and TOF the spectrometer SPAN at BENSC

    CERN Document Server

    Pappas, C; Kischnik, R; Mezei, F

    2002-01-01

    The cylindrical symmetry of the magnetic field configuration of SPAN allows for simultaneous neutron spin echo (NSE) measurements over the whole range of scattering angles accessible by a spectrometer. The open construction also allows for time-of-flight (TOF) measurements, which can be performed under the same conditions as NSE, in particular with polarization analysis. TOF and NSE spectra are then directly comparable with each other, without any adjustable parameters, covering a dynamic range of more than four orders of magnitude at a single wavelength. (orig.)

  9. Spatial perturbation of a wing-tip vortex using pulsed span-wise jets

    Science.gov (United States)

    Heyes, A. L.; Smith, D. A. R.

    The separation distance required between transport aircraft to avoid wake vortices remains a limiting factor on airport capacity. The dissipation of the wake can be accelerated by perturbing co-operative instabilities between multiple pairs of vortices. This paper presents the results of a preliminary experimental investigation into the use of pulsed span-wise air jets in the wing tip to perturb a single tip vortex in the very near field. Velocity measurements were made using PIV and hot-wire anemometry. The results demonstrate that the vortex position can be modulated at frequencies up to 50 Hz and, as such, the method shows promise for forcing instability in multiple vortex wakes.

  10. Dynamic Numerical Analysis of Steel Footbridge

    Directory of Open Access Journals (Sweden)

    Major Maciej

    2017-06-01

    Full Text Available The study presents a numerical analysis of the arched footbridge designed in two variants, made of steel and aluminium. The first part presents the criteria for evaluation of the comfort of using the footbridges. The study examined the footbridge with arched design with span in the axis of 24 m and width of 1.4 m. Arch geometry was made as a part of the circle with radius of r = 20 m cut off with a chord with length equal to the calculation length of the girders. The model of the analysed footbridge was subjected to the dynamic effect of wind and the pedestrian traffic with variable flexibility. The analyses used Robot Structural Analysis software.

  11. Dynamic characteristics of old railway steel bridges in Egypt

    Directory of Open Access Journals (Sweden)

    Hassan Maha M.

    2017-01-01

    Full Text Available Dynamic response of existing railway bridges is influenced by many factors including structural properties, railway traffic speed, and train-to-bridge frequency. Excessive vibrations cause passengers’ discomfort, rail elements deterioration, higher derailment risks, fatigue deformation problems, stress amplification, and eventually high maintenance costs. In such cases, applied remedies include limiting traffic speed or changing bridge mass or stiffness. Traffic induced vibrations can also be mitigated by enhancing structural damping through application of Tuned Mass Dampers. Egypt has one of the oldest railway transportation network with several steel bridges crossing the Nile River, in addition to several canals. In a running project, dynamic properties of selective bridges on the Egyptian railway networks infrastructures are investigated through extensive field testing. The considered bridges cover a wide range of structural properties including simply-supported and continuous bridges, spans ranging between 40 to 90 m, single and double track lines, and open timber bridges. Field tests results are studied; hence, key factors affecting bridge dynamic characteristics are discussed and highlighted. Moreover, results are compared with those extracted from finite element analyses. The project aims at evaluating the possibility of excessive vibration problems while considering different values of train velocities. In the current study, focus is given to two example bridges. Field and numerical results are exhibited and discussed. Eventually, possibility of excessive vibration problems are determined considering different values of train velocities. It was observed that available formulas in current design codes do not capture warping and torsional modes that present fundamental modes for truss bridges. In addition, existing railway bridges do not satisfy serviceability limit states when considering high speed trains.

  12. Limits to Human Life Span Through Extreme Value Theory

    NARCIS (Netherlands)

    Einmahl, Jesson; Einmahl, John; de Haan, L.F.M.

    2017-01-01

    There is no scientific consensus on the fundamental question whether the probability distribution of the human life span has a finite endpoint or not and, if so, whether this upper limit changes over time. Our study uses a unique dataset of the ages at death - in days - of all (about 285,000) Dutch

  13. Using the minimum spanning tree to trace mass segregation

    NARCIS (Netherlands)

    Allison, R.J.; Goodwin, S.P.; Parker, R.J.; Portegies Zwart, S.F.; de Grijs, R.; Kouwenhoven, M.B.N.

    2009-01-01

    We present a new method to detect and quantify mass segregation in star clusters. It compares the minimum spanning tree (MST) of massive stars with that of random stars. If mass segregation is present, the MST length of the most massive stars will be shorter than that of random stars. This

  14. Memory and digit span experiment among psychology students in ...

    African Journals Online (AJOL)

    The study was an experiment that investigated short-term memory and digit span among the psychology students in a federal and state university in Lagos State, Nigeria. Memory is the process involved in retaining; retrieving and using information about stimuli, images, events, ideas and skills after original information was ...

  15. Memory and Digit Span Experiment among Psychology Students in ...

    African Journals Online (AJOL)

    The study was an experimental field that investigated short-term memory and digit span among the psychology students in federal and state universities in Lagos State, Nigeria. Memory is the process involved in retaining, retrieving and using information about stimuli, images, events, ideas and skills after original ...

  16. 1-Skeletons of the Spanning Tree Problems with Additional Constraints

    Directory of Open Access Journals (Sweden)

    V. A. Bondarenko

    2015-01-01

    Full Text Available In this paper, we study polyhedral properties of two spanning tree problems with additional constraints. In the first problem, it is required to find a tree with a minimum sum of edge weights among all spanning trees with the number of leaves less than or equal to a given value. In the second problem, an additional constraint is the assumption that the degree of all nodes of the spanning tree does not exceed a given value. The recognition versions of both problems are NP-complete. We consider polytopes of these problems and their 1-skeletons. We prove that in both cases it is a NP-complete problem to determine whether the vertices of 1-skeleton are adjacent. Although it is possible to obtain a superpolynomial lower bounds on the clique numbers of these graphs. These values characterize the time complexity in a broad class of algorithms based on linear comparisons. The results indicate a fundamental difference between combinatorial and geometric properties of the considered problems from the classical minimum spanning tree problem.

  17. RE-USE AND LIFE SPAN OF GLOVES

    African Journals Online (AJOL)

    RE-USE AND LIFE SPAN OF GLOVES. W.H. van Palenstein Helderman. Department of Community and Preventive Dentistry. Faculty of Dentistry, Muhimbili University College of Health Sciences,. Dar es Salaam. Tanzania. Introduction. The use of gloves is a prerequisite for hygienic performed dental treatment since: 1.

  18. Effects of Temporal Modulation on Crowding, Visual Span, and Reading.

    Science.gov (United States)

    Haberthy, Caroline; Yu, Deyue

    2016-06-01

    Crowding, the increased difficulty in recognizing a target due to the proximity of adjacent objects, is identified as the main sensory constraint for the size of the visual span (the number of letters recognized without moving the eyes) and reading speed in peripheral vision. The goal of the present study is to assess the impact of temporal modulation on crowding, visual span, and reading in the periphery. Six normally sighted young adults participated in the study. Four temporal modulation patterns were examined: (1) moving scotoma (sequentially masking the component letters in a letter string or word), (2) moving window (sequentially presenting the component letters), (3) flashing (repeatedly masking and presenting all letters simultaneously), and (4) static (the control condition; no temporal changes during the presentation). For each condition, we obtained the spatial extent of crowding, the size of the visual span, and reading speeds measured by the rapid serial visual presentation method. Compared with the static condition, the spatial extent of crowding was reduced in the moving window condition. Both the moving window and moving scotoma conditions led to a faster reading speed for print sizes smaller than critical print size (the smallest print size that allows maximum reading speed). However, none of the temporal modulations increased the size of the visual span and reading speed for print sizes larger than critical print size. The results suggest that the temporal modulation patterns are of limited benefit for peripheral reading despite the substantial improvement for slow reading when print size is close to acuity threshold.

  19. Life Span Approach to Growth and Human Development: A Broad ...

    African Journals Online (AJOL)

    The traditional approach to the study of development emphasizes extensive change in childhood. ... the paper draws the reader's attention to the fact that by adopting the life-span perspective, we gain insights into what our lives will be like as we grow into middle age or old age, who we are, how we came to be this way and ...

  20. Robust relationship between reading span and speech recognition in noise.

    Science.gov (United States)

    Souza, Pamela; Arehart, Kathryn

    2015-01-01

    Working memory refers to a cognitive system that manages information processing and temporary storage. Recent work has demonstrated that individual differences in working memory capacity measured using a reading span task are related to ability to recognize speech in noise. In this project, we investigated whether the specific implementation of the reading span task influenced the strength of the relationship between working memory capacity and speech recognition. The relationship between speech recognition and working memory capacity was examined for two different working memory tests that varied in approach, using a within-subject design. Data consisted of audiometric results along with the two different working memory tests; one speech-in-noise test; and a reading comprehension test. The test group included 94 older adults with varying hearing loss and 30 younger adults with normal hearing. Listeners with poorer working memory capacity had more difficulty understanding speech in noise after accounting for age and degree of hearing loss. That relationship did not differ significantly between the two different implementations of reading span. Our findings suggest that different implementations of a verbal reading span task do not affect the strength of the relationship between working memory capacity and speech recognition.

  1. Individual differences in memory span: relationship between rate of ...

    African Journals Online (AJOL)

    Individual differences in memory span: relationship between rate of item identification and rate of reading. AM Sunmola, CC Ukachi, JI Osu. Abstract. No Abstract Available African Journal for the Psychological Study of Social Issues Vol.4(1) 1999: 74-78. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL ...

  2. The irreducible core of a minimum cost spanning tree game

    NARCIS (Netherlands)

    Aarts, Henricus F.M.; Driessen, Theo

    1993-01-01

    It is a known result that for a minimum cost spanning tree (mcst) game a Core allocation can be deduced directly from a mcst in the underlying network. To determine this Core allocation one only needs to determine a mcst in the network and it is not necessary to calculate the coalition values of the

  3. Modelling mid-span water table depth and drainage discharge ...

    African Journals Online (AJOL)

    2015-04-03

    Apr 3, 2015 ... Modelling mid-span water table depth and drainage discharge dynamics using DRAINMOD 6.1 in a sugarcane field in Pongola,. South Africa. M Malota1,2 and A ... and waterlogging and reclamation plans need to be effected ..... model evaluation at a sugarcane field in north-eastern New South. Wales ...

  4. Neuromodulation of Behavioral and Cognitive Development across the Life Span

    Science.gov (United States)

    Li, Shu-Chen

    2012-01-01

    Among other mechanisms, behavioral and cognitive development entail, on the one hand, contextual scaffolding and, on the other hand, neuromodulation of adaptive neurocognitive representations across the life span. Key brain networks underlying cognition, emotion, and motivation are innervated by major transmitter systems (e.g., the catecholamines…

  5. Life Span and Resiliency Theory: A Critical Review

    Directory of Open Access Journals (Sweden)

    Alexa Smith-Osborne

    2007-05-01

    Full Text Available Theories of life span development describe human growth and change over the life cycle (Robbins, Chatterjee, & Canda, 2006. Major types of developmental theories include biological, psychodynamic, behavioral, and social learning, cognitive, moral, and spiritual, and those influenced by systems, empowerment, and conflict theory. Life span development theories commonly focus on ontogenesis and sequential mastery of skills, tasks, and abilities. Social work scholars have pointed out that a limitation of life span and other developmental theory is lack of attention to resilience (Greene, 2007; Robbins et al., 1998. The concept of resilience was developed to “describe relative resistance to psychosocial risk experiences” (Rutter, 1999b, p. 119. Longitudinal studies focused on typical and atypical child development informed theory formulation in developmental psychopathology (Garmezy & Rutter, 1983; Luthar, Cichetti,& Becker, 2000 and in an evolving resilience model (Richardson, 2002; Werner & Smith, 1992. Research on resilience has found a positive relationship between a number of individual traits and contextual variables and resistance to a variety of risk factors among children and adolescents. More recently, resilience research has examined the operation of these same factors in the young adult, middle-age, and elder life stages. This article examines the historical and conceptual progression of the two developmental theories—life span and resiliency—and discusses their application to social work practice and education in human behavior in the social environment.

  6. Decision-making heuristics and biases across the life span.

    Science.gov (United States)

    Strough, Jonell; Karns, Tara E; Schlosnagle, Leo

    2011-10-01

    We outline a contextual and motivational model of judgment and decision-making (JDM) biases across the life span. Our model focuses on abilities and skills that correspond to deliberative, experiential, and affective decision-making processes. We review research that addresses links between JDM biases and these processes as represented by individual differences in specific abilities and skills (e.g., fluid and crystallized intelligence, executive functioning, emotion regulation, personality traits). We focus on two JDM biases-the sunk-cost fallacy (SCF) and the framing effect. We trace the developmental trajectory of each bias from preschool through middle childhood, adolescence, early adulthood, and later adulthood. We conclude that life-span developmental trajectories differ depending on the bias investigated. Existing research suggests relative stability in the framing effect across the life span and decreases in the SCF with age, including in later life. We highlight directions for future research on JDM biases across the life span, emphasizing the need for process-oriented research and research that increases our understanding of JDM biases in people's everyday lives. © 2011 New York Academy of Sciences.

  7. Women's Spirituality across the Life Span: Implications for Counseling

    Science.gov (United States)

    Briggs, Michele Kielty; Dixon, Andrea L.

    2013-01-01

    Women's spirituality has unique characteristics that are often ignored within the spirituality literature. The authors review the literature on women's spirituality to reveal the major themes women have identified as relevant to their spiritual journeys across the life span. Implications for counseling and ideas for practice are included after…

  8. DIRECT SELECTION ON LIFE-SPAN IN DROSOPHILA-MELANOGASTER

    NARCIS (Netherlands)

    ZWAAN, B; BIJLSMA, R; HOEKSTRA, RE

    An important issue in the study of the evolution of aging in Drosophila melanogaster is whether decreased early fecundity is inextricably coupled with increased life span in selection experiments on age at reproduction. Here, this problem has been tackled using an experimental design in which

  9. Compression of women's reproductive spans in Andhra Pradesh, India

    NARCIS (Netherlands)

    Padmadas, SS; Hutter, [No Value; Willekens, F

    CONTEXT. The total fertility rate in Andhra Pradesh, India, has recently decreased to near-replacement level; however, the reasons for the fertility decline are unknown. METHODS: Data from the second round of the National Family Health Survey were used to examine the reproductive span-the duration

  10. E-commercspan>e in the banking sector

    NARCIS (Netherlands)

    Stroeken, J.H.M.; Munck, S.G.E. de; Hawkins, R.

    2001-01-01

    Het doel van de studie is het verschaffen van inzicht in de effecten van e-commercspan>e in de Nederlandse banksector. Elektronische transactie omgevingen als zodanig zijn niet nieuw voor banken, en financiële dienstverlening heeft altijd al te maken gehad met intermediëring door elektronische netwerken.

  11. Riding the Bus: Symbol and Vehicle for Boundary Spanning

    Science.gov (United States)

    Romero, Deborah

    2014-01-01

    In this reflective essay I examine the activity of a bus tour, organized as the result of an ongoing university and city partnership. I illustrate how riding the bus is not only symbolic for positionality in our society, but also how it can be a viable mechanism for initiating boundary spanning and promoting opportunities for place-based learning…

  12. Reading through the Life Span: Individual Differences in Psycholinguistic Effects

    Science.gov (United States)

    Davies, Rob A. I.; Arnell, Ruth; Birchenough, Julia M. H.; Grimmond, Debbie; Houlson, Sam

    2017-01-01

    The effects of psycholinguistic variables are critical to the evaluation of theories about the cognitive reading system. However, reading research has tended to focus on the impact of key variables on average performance. We report the first investigation examining variation in psycholinguistic effects across the life span, from childhood into old…

  13. Continuous steel production and apparatus

    Science.gov (United States)

    Peaslee, Kent D [Rolla, MO; Peter, Jorg J [McMinnville, OR; Robertson, David G. C. [Rolla, MO; Thomas, Brian G [Champaign, IL; Zhang, Lifeng [Trondheim, NO

    2009-11-17

    A process for continuous refining of steel via multiple distinct reaction vessels for melting, oxidation, reduction, and refining for delivery of steel continuously to, for example, a tundish of a continuous caster system, and associated apparatus.

  14. Thermochemical surface engineering of steels

    DEFF Research Database (Denmark)

    Thermochemical Surface Engineering of Steels provides a comprehensive scientific overview of the principles and different techniques involved in thermochemical surface engineering, including thermodynamics, kinetics principles, process technologies and techniques for enhanced performance of steels...

  15. A major QTL affects temperature sensitive adult lethality and inbreeding depression in life span in Drosophila melanogaster.

    DEFF Research Database (Denmark)

    Vermeulen, Corneel J.; Bijlsma, R.; Loeschcke, Volker

    2008-01-01

    of inbreeding effects in specific traits, such as age-specific mortality and life span, provide a good starting point, as a limited set of genes is expected to be involved. Results Here we report on a QTL mapping study on inbreeding related and temperature sensitive lethality in male Drosophila melanogaster...... and the molecular properties of genes that give rise to or modulate its deleterious effects is lacking. These questions warrant the detailed study of genetic loci giving rise to inbreeding depression. However, the complex and polygenic nature of general inbreeding depression makes this a daunting task. Study...... simple, being due mainly to a single recessive QTL on the left arm of chromosome 2. This locus colocalised with a QTL that conditioned variation in female life span, acting as an overdominant locus for this trait. Male life span was additionally affected by variation at the X-chromosome. Conclusion...

  16. Fatigue damage of steel components

    DEFF Research Database (Denmark)

    Fæster, Søren; Zhang, Xiaodan; Huang, Xiaoxu

    2014-01-01

    Railway rails and the inner ring in roller bearings in wind turbines are both experiencing steel-to-steel contact in small areas with huge loads resulting in extremely high stresses in the base materials......Railway rails and the inner ring in roller bearings in wind turbines are both experiencing steel-to-steel contact in small areas with huge loads resulting in extremely high stresses in the base materials...

  17. Joining uranium to steel

    International Nuclear Information System (INIS)

    Perkins, M.A.

    1976-05-01

    A method has been devised which will allow the joining of uranium to steel by fusion welding through the use of an intermediate material. Uranium-0.5 titanium was joined to AISI 304L stainless steel by using a vanadium insert. Also, a method is now available for selecting possible filler metals when two entirely dissimilar metals need to be joined. This method allows a quantitative ranking to be made of the possible filler metals and thus the most likely candidate can be selected

  18. A-3 steel work completed

    Science.gov (United States)

    2009-01-01

    Stennis Space Center engineers celebrated a key milestone in construction of the A-3 Test Stand on April 9 - completion of structural steel work. Workers with Lafayette (La.) Steel Erector Inc. placed the last structural steel beam atop the stand during a noon ceremony attended by more than 100 workers and guests.

  19. A Tale of Wootz Steel

    Indian Academy of Sciences (India)

    Damascus steels were not replicated in Europe until 1821. The pattern welded composite swords are the essence of the Samurai and Viking. 3. The Role of Wootz Steel in the Development of. Modern Metallurgy. For centuries iron and steel were thought as being two elements belonging to the ferrous family, just as copper, ...

  20. A Tale of Wootz Steel

    Indian Academy of Sciences (India)

    Mediterranean sources including one from the time of Alexander. (3rd c. BC), who was said to have been presented with 100 talents of Indian steel. Arabs took ingots of wootz steel to Damascus following which a thriving industry developed there for making weapons and armour of this steel, the renown of which has given.

  1. Depth distribution of martensite in xenon implanted stainless steels

    International Nuclear Information System (INIS)

    Johansen, A.; Johnson, E.; Sarholt-Kristensen, L.; Steenstrup, S.; Hayashi, N.; Sakamoto, I.

    1989-01-01

    The amount of stress-induced martensite and its distribution in depth in xenon implanted austenitic stainless steel poly- and single crystals have been measured by Rutherford backscattering and channeling analysis, depth selective conversion electron Moessbauer spectroscopy, cross-sectional transmission electron microscopy and x-ray diffraction analysis. In low nickel 17/7, 304 and 316 commercial stainless steels and in 17:13 single crystals the martensitic transformation starts at the surface and develops towards greater depth with increasing xenon fluence. The implanted layer is nearly completely transformed, and the interface between martensite and austenite is rather sharp and well defined. In high nickel 310 commercial stainless steel and 15:19 and 20:19 single crystals, on the other hand, only insignificant amounts of martensite are observed. (orig.)

  2. Description of full-range strain hardening behavior of steels.

    Science.gov (United States)

    Li, Tao; Zheng, Jinyang; Chen, Zhiwei

    2016-01-01

    Mathematical expression describing plastic behavior of steels allows the execution of parametric studies for many purposes. Various formulas have been developed to characterize stress strain curves of steels. However, most of those formulas failed to describe accurately the strain hardening behavior of steels in the full range which shows various distinct stages. For this purpose, a new formula is developed based on the well-known Ramberg-Osgood formula to describe the full range strain hardening behavior of steels. Test results of all the six types of steels show a three-stage strain hardening behavior. The proposed formula can describe such behavior accurately in the full range using a single expression. The parameters of the formula can be obtained directly and easily through linear regression analysis. Excellent agreements with the test data are observed for all the steels tested. Furthermore, other formulas such as Ludwigson formula, Gardner formula, UGent formula are also applied for comparison. Finally, the proposed formula is considered to have wide suitability and high accuracy for all the steels tested.

  3. Rolling Bearing Steels - A Technical and Historical Perspective

    Science.gov (United States)

    Zaretsky, Erwin V.

    2012-01-01

    Starting about 1920 it becomes easier to track the growth of bearing materials technology. Until 1955, with few exceptions, comparatively little progress was made in this area. AISI 52100 and some carburizing grades (AISI 4320, AISI 9310) were adequate for most applications. The catalyst to quantum advances in high-performance rolling-element bearing steels was the advent of the aircraft gas turbine engine. With improved bearing manufacturing and steel processing together with advanced lubrication technology, the potential improvements in bearing life can be as much as 80 times that attainable in the late 1950s or as much as 400 times that attainable in 1940. This paper summarizes the chemical, metallurgical and physical aspects of bearing steels and their effect on rolling bearing life and reliability. The single most important variable that has significantly increased bearing life and reliability is vacuum processing of bearing steel. Differences between through hardened, case carburized and corrosion resistant steels are discussed. The interrelation of alloy elements and carbides and their effect on bearing life are presented. An equation relating bearing life, steel hardness and temperature is given. Life factors for various steels are suggested and discussed. A relation between compressive residual stress and bearing life is presented. The effects of retained austenite and grain size are discussed.

  4. Guns, Germs and Steel

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 1. Guns, Germs and Steel - A Short History of Everybody for the Last 13,000 years. Suri Venkatachalam. Book Review Volume 6 ... Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/006/01/0084-0088 ...

  5. Japan steel mill perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murase, K. [Kobe Steel Ltd., Tokyo (Japan)

    2004-07-01

    The international and Japan's steel industry, the coking coal market, and Japan's expectations from Canada's coal industry are discussed. Japan's steel mills are operating at full capacity. Crude steel production for the first half of 2004 was 55.8 million tons. The steel mills are profitable, but costs are high, and there are difficulties with procuring raw materials. Japan is trying to enhance the quality of coke, in order to achieve higher productivity in the production of pig iron. Economic growth is rising disproportionately in the BRICs (Brazil, Russia, India, and China), with a large increase in coking coal demand from China. On the supply side, there are several projects underway in Australia and Canada to increase production. These include new developments by Elk Valley Coal Corporation, Grande Cache Coal, Western Canadian Coal, and Northern Energy and Mining in Canada. The Elga Mine in the far eastern part of Russia is under development. But the market is expected to remain tight for some time. Japan envisions Canadian coal producers will provide a stable coal supply, expansion of production and infrastructure capabilities, and stabilization of price. 16 slides/overheads are included.

  6. Guns, Germs and Steel

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 1. Guns, Germs and Steel - A Short History of Everybody for the Last 13,000 years. Suri Venkatachalam. Book Review Volume 6 Issue 1 January 2001 pp 84-88. Fulltext. Click here to view fulltext PDF. Permanent link:

  7. Exploring boundary-spanning practices among creativity managers

    DEFF Research Database (Denmark)

    Andersen, Poul Houman; Kragh, Hanne

    2015-01-01

    Purpose – External inputs are critical for organisational creativity. In order to bridge different thought worlds and cross-organisational barriers, managers must initiate and motivate boundary spanning processes. The purpose of this paper is to explore how boundary spanners manage creativity...... organisational and departmental boundaries to the fore. Practical implications – Understanding the managerial dilemma faced by creativity managers is a first step to finding solutions. The discussed practices may inspire managers both in resolving creativity management problems and through self......-reflection. Originality/value – The authors contribute to research on boundary spanning practices by linking to creativity research, and bridge to research on management and governance in distributed and lessdefined organisations....

  8. Orion: a glimpse of hope in life span extension?

    Science.gov (United States)

    Muradian, K; Bondar, V; Bezrukov, V; Zhukovsky, O; Polyakov, V; Utko, N

    2010-01-01

    Orion is a multicomponent drug based on derivatives of taurocholic acid and several other compounds. Application of Orion into the feeding medium of Drosophila melanogaster resulted in increased life span and survival at stressful conditions. Two paradoxical features of the drug should be stressed: The "age-threshold" (life span extension was observed only when the drug was applied starting from the second half of life) and induction of "centenarian" flies (older 100 days). Orion enhanced survival at heat shock (38 degrees C) and acidic (pH = 1.6) or alkaline (pH = 11.8) feeding mediums, but not at oxidative stresses modeled by 100% oxygen or application of hydrogen peroxide (H(2)O(2)).

  9. Octave-spanning supercontinuum generation via microwave frequency multiplication

    Science.gov (United States)

    Cole, D. C.; Beha, K. M.; Diddams, S. A.; Papp, S. B.

    2016-06-01

    We demonstrate a system based on telecom components for the generation of a coherent octave-spanning supercontinuum from a continuous-wave laser. The system utilizes direct multiplication of a 10 GHz signal derived from a commercial synthesizer to carve pulses from the laser, which are then iteratively chirped and compressed in two stages. After reducing the repetition rate of the resulting pulse train to 2.5 GHz using selective transmission through an electro-optic gate, propagation through highly-nonlinear fiber generates an octave-spanning supercontinuum spectrum. We discuss the impact of the noise of the modulation frequency on the coherence of the supercontinuum and discuss its mitigation. Close agreement between experiment and theory is shown throughout, and we use our ability to precisely model the experiment to propose an extension of the system to 20 GHz repetition rate.

  10. New and improved spanning ratios for Yao graphs

    DEFF Research Database (Denmark)

    Barba, Luis; Bose, Prosenjit; Damian, Mirela

    2014-01-01

    For a set of points in the plane and a fixed integer κ > 0, the Yao graph Yκ partitions the space around each point into κ equiangular cones of angle θ = 2π/κ, and connects each point to a nearest neighbor in each cone. It is known for all Yao graphs, with the sole exception of Y5, whether...... on the spanning ratio for Y5 from 10:9 to 2 + √3 ≈ 3:74, which falls slightly below the lower bound of 3:79 established for the spanning ratio of Θ5 (Θ-graphs differ from Yao graphs only in the way they select the closest neighbor in each cone). This is the first such separation between a Yao and Θ...

  11. Dissociative style and individual differences in verbal working memory span.

    Science.gov (United States)

    de Ruiter, Michiel B; Phaf, R Hans; Elzinga, Bernet M; van Dyck, Richard

    2004-12-01

    Dissociative style is mostly studied as a risk factor for dissociative pathology, but it may also reflect a fundamental characteristic of healthy information processing. Due to the close link between attention and working memory and the previous finding of enhanced attentional abilities with a high dissociative style, a positive relationship was also expected between dissociative style and verbal working memory span. In a sample of 119 psychology students, it was found that the verbal span of the high-dissociative group was about half a word larger than of the medium and low-dissociative groups. It is suggested that dissociative style may be one of only very few individual differences that is directly relevant to consciousness research.

  12. Implementing Sustainability Criteria for Selecting a Roof Assembly Typology in Medium Span Buildings

    Directory of Open Access Journals (Sweden)

    Julian Canto-Perello

    2015-05-01

    Full Text Available Technological advances have allowed the development of new roof assembly typologies with higher efficiency and less waste. However, in the construction sector the focus is generally on reducing cost and not in sustainable development factors. Short-sighted building planning based only on economic criteria should be avoided improving decision support systems. In addition, the selection of an appropriate roof assembly in a building’s design stage is a complex problem due to the existence of different tangible and intangible factors and the multiple alternatives available. The roof typologies under study involve prefabricated concrete, steel and laminated wood structures. This research work applies a multi-criteria hybrid model combining the Analytical Hierarchy Process with the Delphi method and the VIKOR technique for implementing sustainability criteria in the selection of a roof assembly in medium span buildings. The proposed decision support system enables the use of the triple bottom line that considers economic, social and environmental criteria. Under the criteria analyzed, the compromise solution found is the self-supporting curved system.

  13. DOE life-span radiation effects studies at Pacific Northwest Laboratory

    International Nuclear Information System (INIS)

    Thompson, R.C.; Cross, F.T.; Dagle, G.E.; Park, J.F.; Sanders, C.L.

    1986-01-01

    Major life-span radiation effects studies at Pacific Northwest Laboratory fall into three categories: (1) studies with beagle dogs exposed to plutonium compounds via a single inhalation; (2) studies with dogs and rats exposed chronically via inhalation to various combinations and concentrations of radon, radon daughters, and other components of uranium mine atmospheres; and (3) a study in which rats are exposed via single inhalation, in very large numbers, to very low concentrations of 239 PuO 2 . Exposure of beagles currently on study was initiated in 1970 with 239 PuO 2 , in 1973 with 238 PuO 2 , and in 1976 with 239 Pu(NO 3 ) 4 . These experiments involve more than 500 animals, many of them still alive. Experiments seeking to explain the increased incidence of lung cancer in uranium miners have been in progress since 1966. Present emphasis is on studies with rats, in an attempt to define dose-effect relationships at the lowest feasible radon-daughter exposure levels. Our very-low-level experiment with inhaled 239 PuO 2 in rats, with exposures still under way, includes 1000 rats in the control group and 1000 rats in the lowest-exposure group, where life-span lung doses of <5 rads are anticipated

  14. Improved Span Time Performance in NPD Using Better Coordination

    OpenAIRE

    Suss, Samuel; Thomson, Vince

    2012-01-01

    Part 3: Tools and Methodologies; International audience; New product development (NPD) processes are characterized by uncertainty and iteration making them difficult to plan and manage. A novel dynamic model of NPD that explicitly models communication techniques is used to examine ways to improve span time and effort performance through improved coordination. Results of simulations under various scenarios of epistemic and aleatory uncertainty illustrate how coordination and adapting agile NPD...

  15. Life span exercise among elite intercollegiate student athletes.

    Science.gov (United States)

    Sorenson, Shawn C; Romano, Russell; Azen, Stanley P; Schroeder, E Todd; Salem, George J

    2015-01-01

    Despite prominent public attention, data on life span health and exercise outcomes among elite, competitive athletes are sparse and do not reflect the diversity of modern athletes. Life span exercise behavior differs between National Collegiate Athletic Association (NCAA) student athletes and a nonathlete control group. Sustained exercise is associated with improved cardiopulmonary health outcomes. Cross-sectional, descriptive epidemiology study. Level 3. A total of 496 students and alumni (age range, 17-84 year) at a large, NCAA Division I university, including student athletes and an age- and sex-matched nonathlete control group, completed anonymous, self-report health and exercise questionnaires. Age-stratified, cross-sectional analysis evaluated previous week's total exercise volume (ExVol), self-rated exercise importance (ExImp), and compliance with American College of Sports Medicine (ACSM) exercise guidelines for healthy adults. The association of ACSM guideline compliance with lifetime cardiopulmonary health outcomes was also assessed. Current student athletes reported significantly greater ExVol (P 99.5%), ExImp (P student athletes and nonathletes. Alumni student athletes demonstrated substantially lower ExVol (P 99.5%) and guideline compliance (OR = 0.09, 95% CI = 0.05-0.19) compared with current student athletes, whereas nonathletes had similar exercise behavior across the life span. Among alumni, ACSM guideline compliance was associated with significant attenuation of cardiopulmonary health concerns (P = 0.02, d = -0.50, pCID = 14%) independent of intercollegiate athletic participation. Although current NCAA Division I student athletes demonstrated significant, clinically important differences in exercise behavior compared with nonathletes, no group differences were evident later in life. Irrespective of collegiate athletic status, healthy exercise behavior among alumni was associated with cardiopulmonary health benefits. To realize life span health

  16. Challenges in Special Steel Making

    Science.gov (United States)

    Balachandran, G.

    2018-02-01

    Special bar quality [SBQ] is a long steel product where an assured quality is delivered by the steel mill to its customer. The bars have enhanced tolerance to higher stress application and it is demanded for specialised component making. The SBQ bars are sought for component making processing units such as closed die hot forging, hot extrusion, cold forging, machining, heat treatment, welding operations. The final component quality of the secondary processing units depends on the quality maintained at the steel maker end along with quality maintained at the fabricator end. Thus, quality control is ensured at every unit process stages. The various market segments catered to by SBQ steel segment is ever growing and is reviewed. Steel mills need adequate infrastructure and technological capability to make these higher quality steels. Some of the critical stages of processing SBQ and the critical quality maintenance parameters at the steel mill in the manufacture has been brought out.

  17. High cycle fatigue of austenitic stainless steels

    International Nuclear Information System (INIS)

    Gauthier, J.P.; Lehmann, D.; Picker

    1990-01-01

    This study concerns the evaluation of material data to be used in LMFBR design codes. High cycle fatigue properties of three austenitic stainless steels are evaluated: type AISI 316 (UKAEA tests), type AISI 316L (CEA tests) and type AISI 304 (Interatom tests). The data on these steels comprised some 550 data points from 14 casts. This data set covered a wide range of testing parameters: temperature from 20-625 0 C, frequency from 1-20 000 Hz, constant amplitude and random fatigue loading, with and without mean stress, etc. However, the testing conditions chosen by the three partners differed considerably because they had been fixed independently and not harmonized prior to the tests. This created considerable difficulties for the evaluations. Experimental procedures and statistical treatments used for the three subsets of data are described and discussed. Results are presented in tables and graphs. Although it is often difficult to single out the influence of each parameter due to the different testing conditions, several interesting conclusions can be drawn: The HCF properties of the three steels are consistent with the 0.2% proof stress, the fatigue limit being larger than the latter at temperatures above 550 0 C. The type 304 steel has lower tensile properties than the two other steels and hence also lower HCF properties. Parameters which clearly have a significant effect of HCF behaviour are mean stress or R-ratio (less in the non-endurance region than in the endurance region), temperature, cast or product. Other parameters have probably a weak or no effect but it is difficult to conclude due to insufficient data: environment, specimen orientation, frequency, specimen geometry

  18. Investigation of span-chordwise bending anisotropy of honeybee forewings

    Directory of Open Access Journals (Sweden)

    JianGuo Ning

    2017-05-01

    Full Text Available In this study, the spanwise and chordwise bending stiffness EI of honeybee forewings were measured by a cantilevered bending test. The test results indicate that the spanwise EI of the forewing is two orders of magnitude larger than the chordwise EI. Three structural aspects result in this span-chordwise bending anisotropy: the distribution of resilin patches, the corrugation along the span and the leading edge vein of the venation. It was found that flexion lines formed by resilin patches revealed through fluorescence microscopy promoted the chordwise bending of the forewing during flapping flight. Furthermore, the corrugation of the wing and leading edge veins of the venation, revealed by micro-computed tomography, determines the relatively greater spanwise EI of the forewing. The span-chordwise anisotropy exerts positive structural and aerodynamic influences on the wing. In summary, this study potentially assists researchers in understanding the bending characteristics of insect wings and might be an important reference for the design and manufacture of bio-inspired wings for flapping micro aerial vehicles.

  19. From elongated spanning trees to vicious random walks

    Energy Technology Data Exchange (ETDEWEB)

    Gorsky, A. [ITEP, B. Cheryomushkinskaya 25, 117218 Moscow (Russian Federation); Nechaev, S., E-mail: nechaev@lptms.u-psud.fr [LPTMS, Université Paris Sud, 91405 Orsay Cedex (France); P.N. Lebedev Physical Institute of the Russian Academy of Sciences, 119991 Moscow (Russian Federation); Poghosyan, V.S. [Institute for Informatics and Automation Problems NAS of Armenia, 375044 Yerevan (Armenia); Priezzhev, V.B. [Bogolubov Laboratory of Theoretical Physics, Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation)

    2013-05-01

    Given a spanning forest on a large square lattice, we consider by combinatorial methods a correlation function of k paths (k is odd) along branches of trees or, equivalently, k loop-erased random walks. Starting and ending points of the paths are grouped such that they form a k-leg watermelon. For large distance r between groups of starting and ending points, the ratio of the number of watermelon configurations to the total number of spanning trees behaves as r{sup −ν}logr with ν=(k{sup 2}−1)/2. Considering the spanning forest stretched along the meridian of this watermelon, we show that the two-dimensional k-leg loop-erased watermelon exponent ν is converting into the scaling exponent for the reunion probability (at a given point) of k(1+1)-dimensional vicious walkers, ν{sup -tilde=}k{sup 2}/2. At the end, we express the conjectures about the possible relation to integrable systems.

  20. Special steel production on common carbon steel production line

    Science.gov (United States)

    Pi, Huachun; Han, Jingtao; Hu, Haiping; Bian, Ruisheng; Kang, Jianjun; Xu, Manlin

    2004-06-01

    The equipment and technology of small bar tandem rolling line of Shijiazhuang Iron & Steel Co. in China has reached the 90's international advanced level in the 20th century, but products on the line are mostly of common carbon steel. Currently there are few steel plants in China to produce 45 steel bars for cold drawing, which is a kind of shortage product. Development of 45 steel for cold drawing has a wide market outlook in China. In this paper, continuous cooling transformation (CCT) curve of 45 steel for cold drawing used for rolling was set out first. According to the CCT curve, we determined some key temperature points such as Ac3 temperature and Ac1 temperature during the cooling procedure and discussed the precipitation microstructure at different cooling rate. Then by studying thermal treatment process of 45 steel bars for cold drawing, the influence of cooling time on microstructure was analyzed and the optimum cooling speed has been found. All results concluded from the above studies are the basis of regulating controlled cooling process of 45 steel bars for cold drawing. Finally, the feasible production process of 45 steel bars for cold drawing on common carbon steel production line combined with the field condition was recommended.

  1. Special steel production on common carbon steel production line

    International Nuclear Information System (INIS)

    Pi Huachun; Han Jingtao; Hu Haiping; Bian Ruisheng; Kang Jianjun; Xu Manlin

    2004-01-01

    The equipment and technology of small bar tandem rolling line of Shijiazhuang Iron and Steel Co. in China has reached the 90's international advanced level in the 20th century, but products on the line are mostly of common carbon steel. Currently there are few steel plants in China to produce 45 steel bars for cold drawing, which is a kind of shortage product. Development of 45 steel for cold drawing has a wide market outlook in China. In this paper, continuous cooling transformation (CCT) curve of 45 steel for cold drawing used for rolling was set out first. According to the CCT curve, we determined some key temperature points such as Ac3 temperature and Ac1 temperature during the cooling procedure and discussed the precipitation microstructure at different cooling rate. Then by studying thermal treatment process of 45 steel bars for cold drawing, the influence of cooling time on microstructure was analyzed and the optimum cooling speed has been found. All results concluded from the above studies are the basis of regulating controlled cooling process of 45 steel bars for cold drawing. Finally, the feasible production process of 45 steel bars for cold drawing on common carbon steel production line combined with the field condition was recommended

  2. Mobbing and harassment in the steel enterprises

    Directory of Open Access Journals (Sweden)

    J. Vveinhardt

    2017-01-01

    Full Text Available Mobbing and harassment are widely analysed in organizations providing various services but are little studied in the companies undertaking industrial activities. Therefore, the aim of the paper is to diagnose the prevalence of mobbing and harassment in the steel enterprises. The case study analysis of the largest steel producer in the world, and specifically its division in Poland was used to determine the prevalence of these phenomena. It was found out that the said company is the example of the ethically and socially responsible organization. However, the interviews indicate that single cases of mobbing and harassment activities (though relatively rare were also observed. They were distributed among three groups of employees: 1 those who do physical work (are directly engaged in the production process; 2 employees involved in the administrative activity and sales; and 3 managerial staff.

  3. An innovative steel-concrete joint for integral abutment bridges

    Directory of Open Access Journals (Sweden)

    Bruno Briseghella

    2015-08-01

    Full Text Available Integral abutment bridges are becoming rather common, due to the durability problems of bearings and expansion joints. At the same time, among short- and medium-span bridges, multi-beam steel-concrete composite deck with hot-rolled girder is an economical and interesting alternative to traditional pre-stressed concrete solutions. The two concepts can be linked together to design integral steel-concrete composite bridges with the benefits of two typologies. The most critical aspect for these bridges is usually the joints between deck and piers or abutments. In this paper, an innovative beam-to-pier joint is proposed and a theoretical and experimental study is introduced and discussed. The analyzed connection is aimed at combining general ease of construction with a highly simplified assembly procedure and a good transmission of hogging and sagging moment at the supports in continuous beams. For this purpose, the traditional shear studs, used at the interface between steel beam and upper concrete slab, are also used at the ends of steel profiles welded horizontally to the end plates. To better understand the behaviour of this kind of joints and the roles played by different components, three large-scale specimens were tested and an FE model was implemented. The theoretical and experimental results confirmed the potential of the proposed connection for practical applications and indicated the way to improve its structural behaviour.

  4. Anticorrosive influence of Acetobacter aceti biofilms on carbon steel1

    Science.gov (United States)

    France, Danielle Cook

    2016-01-01

    Microbiologically influenced corrosion (MIC) of carbon steel infrastructure is an emerging environmental and cost issue for the ethanol fuel industry, yet its examination lacks rigorous quantification of microbiological parameters that could reveal effective intervention strategies. To quantitatively characterize the effect of cell concentration on MIC of carbon steel, numbers of bacteria exposed to test coupons were systematically controlled to span four orders of magnitude throughout a seven-day test. The bacterium studied, Acetobacter aceti, has been found in ethanol fuel environments, and can convert ethanol to the corrosive species acetic acid. A. aceti biofilms formed during the test were qualitatively evaluated with fluorescence microscopy, and steel surfaces were characterized by scanning electron microscopy. During exposure, biofilms developed more quickly, and test reactor pH decreased at a faster rate, when cell exposure was higher. Resulting corrosion rates, however, were inversely proportional to cell exposure, indicating that A. aceti biofilms are able to protect carbon steel surfaces from corrosion. This is a novel demonstration of corrosion inhibition by an acid-producing bacterium that occurs naturally in corrosive environments. Mitigation techniques for MIC that harness the power of microbial communities have the potential to be scalable, inexpensive, and green solutions to industrial problems. PMID:28082824

  5. Anticorrosive Influence of Acetobacter aceti Biofilms on Carbon Steel

    Science.gov (United States)

    France, Danielle Cook

    2016-09-01

    Microbiologically influenced corrosion (MIC) of carbon steel infrastructure is an emerging environmental and cost issue for the ethanol fuel industry, yet its examination lacks rigorous quantification of microbiological parameters that could reveal effective intervention strategies. To quantitatively characterize the effect of cell concentration on MIC of carbon steel, numbers of bacteria exposed to test coupons were systematically controlled to span four orders of magnitude throughout a seven-day test. The bacterium studied, Acetobacter aceti, has been found in ethanol fuel environments and can convert ethanol to the corrosive species acetic acid. A. aceti biofilms formed during the test were qualitatively evaluated with fluorescence microscopy, and steel surfaces were characterized by scanning electron microscopy. During exposure, biofilms developed more quickly, and test reactor pH decreased at a faster rate, when cell exposure was higher. Resulting corrosion rates, however, were inversely proportional to cell exposure, indicating that A. aceti biofilms are able to protect carbon steel surfaces from corrosion. This is a novel demonstration of corrosion inhibition by an acid-producing bacterium that occurs naturally in corrosive environments. Mitigation techniques for MIC that harness the power of microbial communities have the potential to be scalable, inexpensive, and green solutions to industrial problems.

  6. Kinetics of biofilm formation and desiccation survival of Listeria monocytogenes in single and dual species biofilms with Pseudomonas fluorescens, Serratia proteamaculans or Shewanella baltica on food-grade stainless steel surfaces.

    Science.gov (United States)

    Daneshvar Alavi, Hessam Edin; Truelstrup Hansen, Lisbeth

    2013-01-01

    This study investigated the dynamics of static biofilm formation (100% RH, 15 °C, 48-72 h) and desiccation survival (43% RH, 15 °C, 21 days) of Listeria monocytogenes, in dual species biofilms with the common spoilage bacteria, Pseudomonas fluorescens, Serratia proteamaculans and Shewanella baltica, on the surface of food grade stainless steel. The Gram-negative bacteria reduced the maximum biofilm population of L. monocytogenes in dual species biofilms and increased its inactivation during desiccation. However, due to the higher desiccation resistance of Listeria relative to P. fluorescens and S. baltica, the pathogen survived in greater final numbers. In contrast, S. proteamaculans outcompeted the pathogen during the biofilm formation and exhibited similar desiccation survival, causing the N21 days of Serratia to be ca 3 Log10(CFU cm(-2)) greater than that of Listeria in the dual species biofilm. Microscopy revealed biofilm morphologies with variable amounts of exopolymeric substance and the presence of separate microcolonies. Under these simulated food plant conditions, the fate of L. monocytogenes during formation of mixed biofilms and desiccation depended on the implicit characteristics of the co-cultured bacterium.

  7. Concrete-Filled Steel Tube Arch Bridges in China

    Directory of Open Access Journals (Sweden)

    Jielian Zheng

    2018-02-01

    Full Text Available In the past 20 years, great progress has been achieved in China in the construction of concrete-filled steel tube (CFST arch bridges and concrete arch bridges with a CFST skeleton. The span of these bridges has been increasing rapidly, which is rare in the history of bridge development. The large-scale construction of expressways and high-speed railways demands the development of long-span arch bridges, and advances in design and construction techniques have made it possible to construct such bridges. In the present study, the current status, development, and major innovative technologies of CFST arch bridges and concrete arch bridges with a CFST skeleton in China are elaborated. This paper covers the key construction technologies of CFST arch bridges, such as the design, manufacture, and installation of steel tube arch trusses, the preparation and pouring of in-tube concrete, and the construction of the world’s longest CFST arch bridge—the First Hejiang Yangtze River Bridge. The main construction technologies of reinforced concrete arch bridges are also presented, which include cable-stayed fastening-hanging cantilever assembly, adjusting the load by means of stay cables, surrounding the concrete for arch rib pouring, and so forth. In addition, the construction of two CFST skeleton concrete arch bridges—the Guangxi Yongning Yong River Bridge and the Yunnan–Guangxi Railway Nanpan River Bridge—is discussed. CFST arch bridges in China have already gained a world-leading position; with the continuous innovation of key technologies, China will become the new leader in promoting the development of arch bridges. Keywords: Concrete-filled steel tube (CFST arch bridge, Steel-reinforced concrete arch bridge, Cable-stayed fastening-hanging cantilever assembly, Vacuum-assisted pouring in-tube concrete, Adjusting load by stay cables

  8. History of ultrahigh carbon steels

    Energy Technology Data Exchange (ETDEWEB)

    Wadsworth, J.; Sherby, O.D.

    1997-06-20

    The history and development of ultrahigh carbon steels (i.e., steels containing between 1 and 2.l percent C and now known as UHCS) are described. The early use of steel compositions containing carbon contents above the eutectoid level is found in ancient weapons from around the world. For example, both Damascus and Japanese sword steels are hypereutectoid steels. Their manufacture and processing is of interest in understanding the role of carbon content in the development of modern steels. Although sporadic examples of UHCS compositions are found in steels examined in the early part of this century, it was not until the mid-1970s that the modern study began. This study had its origin in the development of superplastic behavior in steels and the recognition that increasing the carbon content was of importance in developing that property. The compositions that were optimal for superplasticity involved the development of steels that contained higher carbon contents than conventional modern steels. It was discovered, however, that the room temperature properties of these compositions were of interest in their own right. Following this discovery, a period of intense work began on understanding their manufacture, processing, and properties for both superplastic forming and room temperature applications. The development of superplastic cast irons and iron carbides, as well as those of laminated composites containing UHCS, was an important part of this history.

  9. Robustness of steel joints with stainless steel bolts in fire

    Science.gov (United States)

    Satheeskumar, N.; Davison, J. B.

    2014-12-01

    The robustness of steel joints in fire is important for steel building structures because of the need to prevent progressive collapse. Stainless steel is widely used in building construction mainly because of its corrosion resistance, but it also possesses improved fire resistance compared with conventional non-alloy, fine grain structural steels. Extensive research performed on the robustness of steel joints in fire has revealed that failure at elevated temperature may be controlled by bolt shear for fin plate and web cleat connections. Hence, this study focussed on the use of stainless steel in experimental tests conducted on fin plate and web cleat connections at high temperatures. In addition, this study investigated the use of a component-based model to predict connection performance at elevated temperature.

  10. Microstructural Evolution of AerMet100 Steel Coating on 300M Steel Fabricated by Laser Cladding Technique

    Science.gov (United States)

    Liu, Jian; Li, Jia; Cheng, Xu; Wang, Huaming

    2018-02-01

    In this paper, the process of coating AerMet100 steel on forged 300M steel with laser cladding was investigated, with a thorough analysis of the chemical composition, microstructure, and hardness of the substrate and the cladding layer as well as the transition zone. Results show that the composition and microhardness of the cladding layer are macroscopically homogenous with the uniformly distributed bainite and a small amount of retained austenite in martensite matrix. The transition zone, which spans approximately 100 μm, yields a gradual change of composition from the cladding layer to 300M steel matrix. The heat-affected zone (HAZ) can be divided into three zones: the sufficiently quenched zone (SQZ), the insufficiently quenched zone (IQZ), and the high tempered zone (HTZ). The SQZ consists of martensitic matrix and bainite, as for the IQZ and the HTZ the microstructures are martensite + tempered martensite and tempered martensite + ferrite, respectively. These complicated microstructures in the HAZ are caused by different peak heating temperatures and heterogeneous microstructures of the as-received 300M steel.

  11. Steel containment buckling

    International Nuclear Information System (INIS)

    Bennett, J.G.; Fly, G.W.; Baker, W.E.

    1984-01-01

    The Steel Containment Buckling program is in its fourth phase of work directed at the evaluation of the effects of the structural failure mode of steel containments when the membrane stresses are compressive. The structural failure mode for this state of stress is instability or buckling. The program to date has investigated: (1) the effect on overall buckling capacity of the ASME area replacement method for reinforcing around circular penetrations; (2) a set of benchmark experiments on ring-stiffened shells having reinforced and framed penetrations; (3) large and small scale experiments on knuckle region buckling from internal pressure and post-buckling behavior to failure for vessel heads having torispherical geometries; and (4) buckling under time-dependent loadings (dynamic buckling). The first two investigations are complete, the knuckle buckling experimental efforts are complete with data analysis and reporting in progress, and the dynamic buckling experimental and analytical work is in progress

  12. Steel containment buckling

    International Nuclear Information System (INIS)

    Butler, T.A.; Baker, W.E.

    1986-01-01

    Two aspects of buckling of a free-standing nuclear steel containment building were investigated in a combined experimental and analytical program. In the first part of the study, the response of a scale model of a containment building to dynamic base excitation is investigated. A simple harmonic signal was used for preliminary studies followed by experiments with scaled earthquake signals as the excitation source. The experiments and accompanying analyses indicate that the scale model response to earthquake-type excitations is very complex and that current analytical methods may require a dynamic capacity reduction factor to be incorporated. The second part of the study quantified the effects of framing at large penetrations on the static buckling capacity of scale model containments. Results show little effect from the framing for the scale models constructed from the polycarbonate, Lexan. However, additional studies with a model constructed of the prototypic steel material are suggested

  13. 46 CFR 42.15-30 - Hatchways closed by weathertight covers of steel or other equivalent material fitted with gaskets...

    Science.gov (United States)

    2010-10-01

    ... than 358 pounds per square foot on hatchways in position 1, and not less than 255 pounds per square foot on hatchways in position 2, and the product of the maximum stress thus calculated and the factor... to limit the deflection to not more than 0.0028 times the span under these loads. Mild steel plating...

  14. Reactor Pressure Vessel Steels

    Energy Technology Data Exchange (ETDEWEB)

    Van de Velde, J.; Fabry, A.; Van Walle, E.; Chaoudi, R

    1998-07-01

    SCK-CEN's R and D programme on Reactor Pressure Vessel (RPV) Steels in performed in support of the RVP integrity assessment. Its main objectives are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate the applied methodology on a broad database; (3) to achieve regulatory acceptance and industrial use. Progress and achievements in 1999 are reported.

  15. On the mechanism of phosphorus influence on intercrystalline corrosion of stainless steels

    International Nuclear Information System (INIS)

    Kolotyrkin, Ya.M.; Kasparova, O.V.; Vasyukov, A.B.; Smakhtin, L.A.; Mekhryusheva, L.I.; Bogolyubskij, S.D.

    1979-01-01

    Products of the dissolving of hardened austenite stainless steels with phosphorus impurities were studied by the quantitative analysis in the state inclined to intercrystalline corrosion (ICC). The Cr20Ni20-type steels served as the object of the study. Electronic-microscopic analysis of foils and carbon cues has shown that the studied steels has a single-phase structure in a hardened state. They undergo ICC after anode etching. ICC is absent in a highly pure steel without phosphorus impurities. The hypothesis which relates ICC of hardened stainless steels to the segregation of phosphorus along grain boundaries is experimentally confirmed. So, one of the ways to increase resistance of hardened stainless steels to ICC is the development of methods impeding phosphorus segregation along grain boundaries or its selective oxidation

  16. HIGH TEMPERATURE TENSILE PROPERTIES OF NEW FE-CR-MN DEVELOPED STEEL

    Directory of Open Access Journals (Sweden)

    M. Mahmoudiniya

    2017-03-01

    Full Text Available Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of  new steel and AISI 316 steel were done. The results showed that new FeCrMn developed steel has single austenite phase microstructure, and its tensile strength and toughness were higher than those of 316 steel at 25, 200,350 and 500°C. In contrast with 316 steel, the new FeCrMn steel did not show strain induced transformation and dynamic strain aging phenomena during tensile tests that represented higher austenite stability of new developed steel. Lower density and higher strength of the new steel caused higher specific strength in comparison with the 316 one that can be considered as an important advantage in structural applications but in less corrosive environment

  17. Contaminated Mexican steel incident

    International Nuclear Information System (INIS)

    1985-01-01

    This report documents the circumstances contributing to the inadvertent melting of cobalt 60 (Co-60) contaminated scrap metal in two Mexican steel foundries and the subsequent distribution of contaminated steel products into the United States. The report addresses mainly those actions taken by US Federal and state agencies to protect the US population from radiation risks associated with the incident. Mexico had much more serious radiation exposure and contamination problems to manage. The United States Government maintained a standing offer to provide technical and medical assistance to the Mexican Government. The report covers the tracing of the source to its origin, response actions to recover radioactive steel in the United States, and return of the contaminated materials to Mexico. The incident resulted in significant radiation exposures within Mexico, but no known significant exposure within the United States. Response to the incident required the combined efforts of the Nuclear Regulatory Commission (NRC), Department of Energy, Department of Transportation, Department of State, and US Customs Service (Department of Treasury) personnel at the Federal level and representatives of all 50 State Radiation Control Programs and, in some instances, local and county government personnel. The response also required a diplomatic interface with the Mexican Government and cooperation of numerous commercial establishments and members of the general public. The report describes the factual information associated with the event and may serve as information for subsequent recommendations and actions by the NRC. 8 figures

  18. Desempenho da tangerineira 'Span Americana' em diferentes porta-enxertos

    Directory of Open Access Journals (Sweden)

    Simone Rodrigues da Silva

    2013-12-01

    Full Text Available Este trabalho objetivou avaliar o crescimento vegetativo, a produção e a qualidade de frutos da tangerina 'Span Americana' em diferentes porta-enxertos, nas condições edafoclimáticas de Bebedouro-SP. O plantio foi realizado em junho de 2003, em espaçamento de 6,0 m x 3,0 m, sendo utilizada irrigação por gotejamento a partir de 2006. Os porta-enxertos avaliados foram: citranges [Citrus sinensis (L. Osbeck × Poncirus trifoliata L. Raf] 'Carrizo' e 'Troyer', tetraploides; trifoliatas (P. trifoliata 'Davis A' e 'Flying Dragon'; limão Volkameriano Catania 2 (C. volkameriana Tenn. et Pasq., HRS 849 [(C. aurantium L. cv. 'Smooth Flat Seville' x P. trifoliata cv. 'Argentina'], tangelo 'Orlando' (C. reticulata Blanco × C. paradisi Macf. e limão 'Cravo' (C. limonia Osbeck. Foram avaliadas a produção acumulada, a eficiência produtiva e a precocidade de entrada em produção, no período de 2007 a 2009. Avaliaram-se, também, as dimensões das plantas e a taxa média de crescimento das plantas no período de 2005 a 2008, além da qualidade dos frutos em 2006 e 2007. Em pomares irrigados de tangerineira 'Span Americana', os porta-enxertos trifoliata 'Davis A' e HRS 849 apresentam desempenho horticultural satisfatório. Para plantio em alta densidade, a melhor performance da tangerineira 'Span Americana' é obtida com a utilização dos porta-enxertos trifoliata 'Flying Dragon' e citranges 'Troyer' e 'Carrizo'.

  19. Heritability of life span in the Old Order Amish.

    Science.gov (United States)

    Mitchell, B D; Hsueh, W C; King, T M; Pollin, T I; Sorkin, J; Agarwala, R; Schäffer, A A; Shuldiner, A R

    2001-09-01

    Although a familial contribution to human longevity is recognized, the nature of this contribution is largely unknown. We have examined the familial contribution to life span in the Old Order Amish (OOA) population of Lancaster County, Pennsylvania. Analyses were conducted on 1,655 individuals, representing all those born prior to 1890 and appearing in the most widely available genealogy, surviving until at least age 30 years, and with known date of death. Mean age at death (+/-SD) in this population was 70.7 +/- 15.6 years, and this did not change appreciably over time. Parental and offspring ages at death were significantly correlated, as were ages of death among siblings. Offspring longevity was correlated with longevity of both parents, and in more or less additive fashion. For example, mean offspring age at death was 69.4 +/- 15.3 years in individuals for whom both parents died before the age of 75 years (n = 280) and increased to 73.5 +/- 16.0 years in individuals for whom neither parent died before the age of 75 years (n = 311). These differences were highly significant (P = 0.006). We estimated heritability of life span to be 25% +/- 5%, suggesting that the additive effects of genes account for one quarter of the total variability in life span in the OOA. We conclude that longevity is moderately heritable in the OOA, that the genetic effects are additive, and that genetic influences on longevity are likely to be expressed across a broad range of ages. Published 2001 Wiley-Liss, Inc.

  20. Validation of the human odor span task: effects of nicotine.

    Science.gov (United States)

    MacQueen, David A; Drobes, David J

    2017-10-01

    Amongst non-smokers, nicotine generally enhances performance on tasks of attention, with limited effect on working memory. In contrast, nicotine has been shown to produce robust enhancements of working memory in non-humans. To address this gap, the present study investigated the effects of nicotine on the performance of non-smokers on a cognitive battery which included a working memory task reverse-translated from use with rodents (the odor span task, OST). Nicotine has been reported to enhance OST performance in rats and the present study assessed whether this effect generalizes to human performance. Thirty non-smokers were tested on three occasions after consuming either placebo, 2 mg, or 4 mg nicotine gum. On each occasion, participants completed a battery of clinical and experimental tasks of working memory and attention. Nicotine was associated with dose-dependent enhancements in sustained attention, as evidenced by increased hit accuracy on the rapid visual information processing (RVIP) task. However, nicotine failed to produce main effects on OST performance or on alternative measures of working memory (digit span, spatial span, letter-number sequencing, 2-back) or attention (digits forward, 0-back). Interestingly, enhancement of RVIP performance occurred concomitant to significant reductions in self-reported attention/concentration. Human OST performance was significantly related to N-back performance, and as in rodents, OST accuracy declined with increasing memory load. Given the similarity of human and rodent OST performance under baseline conditions and the strong association between OST and visual 0-back accuracy, the OST may be particular useful in the study of conditions characterized by inattention.

  1. Robustness Analysis of Big Span Glulam Truss Structure

    DEFF Research Database (Denmark)

    Rajčié, V.; čizmar, D.; Kirkegaard, Poul Henning

    2010-01-01

    (Eurocode 0 &1, Probabilistic model code etc.) Based on a project of big span glulam truss structure, build in Croatia few years ago, a probabilistic model is made with four failure elements. Reliability analysis of components is conducted and based on this a robustness analysis is preformed. It can......A progressive collapse of a building is defined as a catastrophic partial or total failure that starts from local damage, caused by a certain event, that can’t be absorbed by the structural system itself. In this paper an overview of principles, provisions and methods are given based on the codes...

  2. A communications model for an ISAS to NASA span link

    Science.gov (United States)

    Green, James L.; Mcguire, Robert E.; Lopez-Swafford, Brian

    1987-01-01

    The authors propose that an initial computer-to-computer communication link use the public packet switched networks (PPSN) Venus-P in Japan and TELENET in the U.S. When the traffic warrants it, this link would then be upgraded to a dedicated leased line that directly connects into the Space Physics Analysis Network (SPAN). The proposed system of hardware and software will easily support migration to such a dedicated link. It therefore provides a cost effective approach to the network problem. Once a dedicated line becomes operation it is suggested that the public networks link and continue to coexist, providing a backup capability.

  3. Promoting wellness in women across the life span.

    Science.gov (United States)

    Zender, Robynn; Olshansky, Ellen

    2009-09-01

    For the purposes of this article, wellness is defined as an individual's subjective experience of overall life satisfaction in relation to physical, mental, emotional, spiritual, social, economic, occupational, and environmental dimensions. Women's wellness focuses on those aspects of well-being that pertain disproportionately, or solely, to women. Wellness includes but is not limited to physical, emotional and social aspects and disruptions that alter a woman's quality of life, such as reproductive and hormonal issues, bone health, gastrointestinal stress, and urinary incontinence. This article discusses women's wellness through the life span, from preconception through death, and considers the implications of these issues for the nursing profession.

  4. Spanning the Creative Space between Home and Work

    DEFF Research Database (Denmark)

    Davis, Lee N.; Hoisl, Karin; Davis, Jerome

    the employee brings to work. Based on Woodman et al.’s (1993) “interactionist perspective” on organizational creativity, supplemented by literature on search and knowledge/combination, we explore whether leisure time activities can span the creative space between the employee’s home and workplace – given...... the range of multi-level inputs that may also contribute to workplace creativity. We use original survey data comprising 4,138 inventions from 21 European countries, the United States and Japan, in all major industries. Organizational creativity is measured by the asset value of the patent on the associated...

  5. Emotional Egocentricity Bias across the life-span

    Directory of Open Access Journals (Sweden)

    Federica eRiva

    2016-04-01

    Full Text Available In our daily lives, we often have to quickly estimate the emotions of our conspecifics in order to have successful social interactions. While this estimation process seems quite easy when we are ourselves in a neutral or equivalent emotional state, it has recently been shown that in case of incongruent emotional states between ourselves and the others, our judgments can be biased. This phenomenon, introduced to the literature with the term Emotional Egocentricity Bias (EEB, has been found to occur in young adults and, to a greater extent, in children. However, how EEB changes across the life-span from adolescence to old age has been largely unexplored. In this study, we recruited 114 female participants subdivided in four cohorts (adolescents, young adults, middle-aged adults, older adults to examine EEB age-related changes. Participants were administered with a paradigm which, by making use of visuo-tactile stimulation that elicits conflicting feelings in paired participants, allows the valid and reliable exploration of EEB. Results highlighted a U-shaped relation between age and EEB, revealing higher emotional egocentricity in adolescents and older adults compared to young and middle-aged adults. These results are in line with the neuroscientific literature which has recently shown that overcoming EEB is associated with a greater activation of a portion of the parietal lobe, namely the right Supramarginal Gyrus (rSMG. This is an area that reaches full maturation only by the end of adolescence, and displays an early decay in older age. Thus, the age-related changes of the EEB could be possibly due to the life-span development of the rSMG. This study is the first one to show the quadratic relation between age and the EEB and set a milestone for further research exploring the neural correlates of the life-span development of the EEB. Future studies are needed in order to generalize these results to the male population and to explore gender

  6. A minimum spanning forest based classification method for dedicated breast CT images

    Energy Technology Data Exchange (ETDEWEB)

    Pike, Robert [Department of Radiology and Imaging Sciences, Emory University School of Medicine, Atlanta, Georgia 30329 (United States); Sechopoulos, Ioannis [Department of Radiology and Imaging Sciences, Emory University School of Medicine, Atlanta, Georgia 30329 and Winship Cancer Institute of Emory University, Atlanta, Georgia 30322 (United States); Fei, Baowei, E-mail: bfei@emory.edu [Department of Radiology and Imaging Sciences, Emory University School of Medicine, Atlanta, Georgia 30329 (United States); Department of Biomedical Engineering, Emory University and Georgia Institute of Technology, Atlanta, Georgia 30322 (United States); Department of Mathematics and Computer Science, Emory University, Atlanta, Georgia 30322 (United States); Winship Cancer Institute of Emory University, Atlanta, Georgia 30322 (United States)

    2015-11-15

    Purpose: To develop and test an automated algorithm to classify different types of tissue in dedicated breast CT images. Methods: Images of a single breast of five different patients were acquired with a dedicated breast CT clinical prototype. The breast CT images were processed by a multiscale bilateral filter to reduce noise while keeping edge information and were corrected to overcome cupping artifacts. As skin and glandular tissue have similar CT values on breast CT images, morphologic processing is used to identify the skin based on its position information. A support vector machine (SVM) is trained and the resulting model used to create a pixelwise classification map of fat and glandular tissue. By combining the results of the skin mask with the SVM results, the breast tissue is classified as skin, fat, and glandular tissue. This map is then used to identify markers for a minimum spanning forest that is grown to segment the image using spatial and intensity information. To evaluate the authors’ classification method, they use DICE overlap ratios to compare the results of the automated classification to those obtained by manual segmentation on five patient images. Results: Comparison between the automatic and the manual segmentation shows that the minimum spanning forest based classification method was able to successfully classify dedicated breast CT image with average DICE ratios of 96.9%, 89.8%, and 89.5% for fat, glandular, and skin tissue, respectively. Conclusions: A 2D minimum spanning forest based classification method was proposed and evaluated for classifying the fat, skin, and glandular tissue in dedicated breast CT images. The classification method can be used for dense breast tissue quantification, radiation dose assessment, and other applications in breast imaging.

  7. Influence of the composition and microstructure on the mechanical properties of single pass weld metal obtained with two-run multipower submerged arc welding of 35 MM Fe 510 quality steels

    International Nuclear Information System (INIS)

    Berkhout, C.F.; Sipkes, M.P.

    1977-01-01

    For three 35 mm Fe 510 quality steels (with and without niobium) experiments have been carried out to establish a relationship between composition, microstructure and mechanical properties of weldmetal obtained with two-run multipower submerged arc welding. The most striking aspects are summarized in the following. The weldmental composition can influence the toughness both, directly by matrix alloying or indirectly through the grainsize and constituents of the microstructure such as the perlite-cementite and martensite fraction. In the range of compositions investigated Mn for instance has a beneficial, while Nb and N have a detrimental effect on notch toughness. For nitrogen the concentration in the weldmetal is determined by the type of weldingflux used. The unfavourable effect of Nb in the weldmetal depends mainly on the Nb content of the plate material (dilution effect). Niobium introduced by the flux is not active and in all probability only present as non metallic inclusions. Remarkable is the strong interaction found between Nb and N. The influence of Nb decreases when the N content of the weldmetal increases. This effect may probably also be an explanation for the great differences in the interpretation of the influence of Nb on weldmetal ductility as mentioned in the literature. A change in the concentration of these elements does not have any influence on the grainsize of the weldmetal. The influence of Mo is quite remarkable. In the first place it has a grain-refining effect, which strongly predominates its detrimental effect in promoting the martensite formation. From quantitative measurements it also appears that Mo reduces the amount of perlite in the weldmetal and suppresses entirely the influence of Mn on the Charpy-V transition temperature and the uppershelf-energy level

  8. Hydrogen effects in stainless steel

    International Nuclear Information System (INIS)

    Caskey, G.R. Jr.

    1983-01-01

    The effects of hydrogen on stainless steels have been reviewed and are summarized in this paper. Discussion covers hydrogen solution and transport in stainless steels as well as the effects of hydrogen on deformation and fracture under various loading conditions. Damage is caused also by helium that arises from decay of the hydrogen isotope tritium. Austenitic, ferritic, martensite, and precipitation-hardenable stainless steels are included in the discussion. 200 references

  9. Steel Casting Requirements for Ordnance.

    Science.gov (United States)

    Steel , *Castings, *Nondestructive testing , * Charpy impact tests , Tensile properties, Loads(Forces), Toughness, Hardness, Etching, Heat treatment, Microstructure, Shells(Structural forms), Economic analysis

  10. Use of linear model analysis techniques in the evaluation of radiation effects on the life span of the beagle

    International Nuclear Information System (INIS)

    Angleton, G.M.; Lee, A.C.; Benjamin, S.A.

    1986-01-01

    The dependency of the beagle-dog life span on level of and age at exposure to 60 Co gamma radiation was analyzed by several techniques; one of these methods was linear model analysis. Beagles of both sexes were given single, bilateral exposures at 8, 28, or 55 days postcoitus (dpc) or at 2, 70, or 365 days postpartum (dpp). Dogs exposed at 8, 28, or 55 dpc or at 2 dpp received 0, 20, or 100 R, whereas those exposed at 70 or 365 dpp received 0 or 100 R. Beagles were designated initially either as sacrifice or as life-span animals. All deaths of life-span study animals were classified as spontaneous, hence for this group the mean age of death was a quantitative response that can be analyzed by linear model analysis techniques. Such analyses for each age group were performed, taking into account differences due to sex, linear and quadratic dependency on dose, and interaction between sex and dose. At this time most of the animals have reached 11 years of age. No significant effects of radiation on mean life span have been detected. 6 refs., 3 figs., 3 tabs

  11. IQ and ability across the adult life span.

    Science.gov (United States)

    Baxendale, Sallie

    2011-07-01

    The experience of cognitive decline can be a potent source of anxiety and concern for many people. While an IQ consistent with estimated optimal levels or previously recorded scores may indicate no significant change in cognitive function, the patient may be accurately reporting a normal age-related deterioration in actual ability. The aim of this article is to chart the age-related changes in intellectual abilities evident on the Wechsler Adult Intelligence Scales-Fourth Edition (WAIS-IV). The norms from the WAIS-IV manual were examined to plot the age-related changes in Full-Scale IQ (FSIQ) and composite scores across the adult life span, while holding actual ability level constant across the age groups. Here we present a graphical representation of the normal cognitive developments and declines in FSIQ, Verbal Comprehension, Perceptual Reasoning, Working Memory, and Processing Speed across the adult life span. This graphical representation provides a rational basis for the identification of atypical profiles/complaints of cognitive deterioration that may require further specialist neuropsychological evaluation. These graphs can be used to provide reassurance for healthy adults with concerns of cognitive decline and as an educative tool for their referring agencies.

  12. Homeless Aging Veterans in Transition: A Life-Span Perspective

    Directory of Open Access Journals (Sweden)

    Carla J. Thompson

    2013-01-01

    Full Text Available The need for counseling and career/educational services for homeless veterans has captured political and economic venues for more than 25 years. Veterans are three times more likely to become homeless than the general population if veterans live in poverty or are minority veterans. This mixed methods study emphasized a life-span perspective approach for exploring factors influencing normative aging and life-quality of 39 homeless veterans in Alabama and Florida. Seven descriptive quantitative and qualitative research questions framed the investigation. Study participants completed a quantitative survey reflecting their preferences and needs with a subset of the sample (N=12 also participating in individual qualitative interview sessions. Thirty-two service providers and stakeholders completed quantitative surveys. Empirical and qualitative data with appropriate triangulation procedures provided interpretive information relative to a life-span development perspective. Study findings provide evidence of the need for future research efforts to address strategies that focus on the health and economic challenges of veterans before they are threatened with the possibility of homelessness. Implications of the study findings provide important information associated with the premise that human development occurs throughout life with specific characteristics influencing the individual’s passage. Implications for aging/homelessness research are grounded in late-life transitioning and human development intervention considerations.

  13. SNEV overexpression extends the life span of human endothelial cells

    International Nuclear Information System (INIS)

    Voglauer, Regina; Chang, Martina Wei-Fen; Dampier, Brigitta; Wieser, Matthias; Baumann, Kristin; Sterovsky, Thomas; Schreiber, Martin; Katinger, Hermann; Grillari, Johannes

    2006-01-01

    In a recent screening for genes downregulated in replicatively senescent human umbilical vein endothelial cells (HUVECs), we have isolated the novel protein SNEV. Since then SNEV has proven as a multifaceted protein playing a role in pre-mRNA splicing, DNA repair, and the ubiquitin/proteosome system. Here, we report that SNEV mRNA decreases in various cell types during replicative senescence, and that it is increased in various immortalized cell lines, as well as in breast tumors, where SNEV transcript levels also correlate with the survival of breast cancer patients. Since these mRNA profiles suggested a role of SNEV in the regulation of cell proliferation, the effect of its overexpression was tested. Thereby, a significant extension of the cellular life span was observed, which was not caused by altered telomerase activity or telomere dynamics but rather by enhanced stress resistance. When SNEV overexpressing cells were treated with bleomycin or bleomycin combined with BSO, inducing DNA damage as well as reactive oxygen species, a significantly lower fraction of apoptotic cells was found in comparison to vector control cells. These data suggest that high levels of SNEV might extend the cellular life span by increasing the resistance to stress or by improving the DNA repair capacity of the cells

  14. STUDY ON SPANNING EXTERNAL FIXATORS FOR PERIARTICULAR OPEN FRACTURES

    Directory of Open Access Journals (Sweden)

    Prasanth Maddila

    2017-04-01

    Full Text Available BACKGROUND Open fractures which occur close to any fracture need immobilisation for the soft tissues to heal. Some open fractures are even fixed with provisional fixations to maintain the alignment of the fractures. The provisional fixation needs to be augmented with external support, which can be given by spanning external fixators across a joint. MATERIALS AND METHODS Our study consists of 38 open fractures of the lower limbs, which are of Gustilo-Anderson’s type IIIB, an MT4 of AO-ASIF soft tissue injury classification essentially requiring open wound management as well as fracture fixation. Wound lavage and debridements are carried out till the soft tissues show granulations. The position in which joint is immobilised is functional and with access to open wound for dressings and inspection without any displacement of the fracture as well as creeping granulation tissue. RESULTS All the cases in our study are maintained with functional position till soft tissue cover is achieved and provisional fixation is done with definitive fixation after soft tissue cover with skin grafting. CONCLUSION Spanning external fixators are useful in maintaining functional positions as well as augmenting the provisional fixation of the compound fractures.

  15. Construction of a yeast artifical chromosome contig spanning the spinal muscular atrophy disease gene region

    Energy Technology Data Exchange (ETDEWEB)

    Kleyn, P.W.; Wang, C.H.; Vitale, E.; Pan, J.; Ross, B.M.; Grunn, A.; Palmer, D.A.; Warburton, D.; Brzustowicz, L.M.; Gilliam, T.G. (New York State Psychiatric Institute, NY (United States)); Lien, L.L.; Kunkel, L.M. (Howard Hughes Medical Institute, Boston, MA (United States))

    1993-07-15

    The childhood spinal muscular atrophies (SMAs) are the most common, serious neuromuscular disorders of childhood second to Duchenne muscular dystrophy. A single locus for these disorders has been mapped by recombination events to a region of 0.7 centimorgan (range, 0.1-2.1 centimorgans) between loci D5S435 and MAP1B on chromosome 5q11.2-13.3. By using PCR amplification to screen yeast artificial chromosome (YAC) DNA pools and the PCR-vectorette method to amplify YAC ends, a YAC contig was constructed across the disease gene region. Nine walk steps identified 32 YACs, including a minimum of seven overlapping YAC clones (average size, 460 kb) that span the SMA region. The contig is characterized by a collection of 30 YAC-end sequence tag sites together with seven genetic markers. The entire YAC contig spans a minimum of 3.2 Mb; the SMA locus is confined to roughly half of this region. Microsatellite markers generated along the YAC contig segregate with the SMA locus in all families where the flanking markers (D5S435 and MAP1B) recombine. Construction of a YAC contig across the disease gene region is an essential step in isolation of the SMA-encoding gene. 26 refs., 3 figs., 1 tab.

  16. A bodyweight-dependent allometric exponent for scaling clearance across the human life-span.

    Science.gov (United States)

    Wang, Chenguang; Peeters, Mariska Y M; Allegaert, Karel; Blussé van Oud-Alblas, Heleen J; Krekels, Elke H J; Tibboel, Dick; Danhof, Meindert; Knibbe, Catherijne A J

    2012-06-01

    To explore different allometric equations for scaling clearance across the human life-span using propofol as a model drug. Data from seven previously published propofol studies ((pre)term neonates, infants, toddlers, children, adolescents and adults) were analysed using NONMEM VI. To scale clearance, a bodyweight-based exponential equation with four different structures for the exponent was used: (I) 3/4 allometric scaling model; (II) mixture model; (III) bodyweight-cut-point separated model; (IV) bodyweight-dependent exponent model. Model I adequately described clearance in adults and older children, but overestimated clearance of neonates and underestimated clearance of infants. Use of two different exponents in Model II and Model III showed significantly improved performance, but yielded ambiguities on the boundaries of the two subpopulations. This discontinuity was overcome in Model IV, in which the exponent changed sigmoidally from 1.35 at a hypothetical bodyweight of 0 kg to a value of 0.56 from 10 kg onwards, thereby describing clearance of all individuals best. A model was developed for scaling clearance over the entire human life-span with a single continuous equation, in which the exponent of the bodyweight-based exponential equation varied with bodyweight.

  17. Celtic steel - an evaluation of depot finds

    Energy Technology Data Exchange (ETDEWEB)

    Presslinger, H.; Mayr, M. [Vereinigte Oesterreichische Eisen- und Stahlwerke AG (VOeST)-Alpine Industrieanlagenbau GmbH, Linz (Austria)

    2001-08-01

    In the course of archaeological excavations on the Gruendberg in Linz/Austria, several depots containing a total of 45 steel objects were discovered. These depots had been set up around 100 before Christ (BC). 25 objects were used to take samples for metallographic and microanalytical investigations. In the exercise of his trade, the Celtic smith could resort to different steel grades: non-alloyed, carbon alloyed, phosphorus alloyed. The technique applied was that of fire-forging single pieces of steel - which had previously been widened by hammering - to give flat bars showing a multi-layer structure. For workpieces with special requirements with regard both to hardness and to toughness, a number of carefully selected flat bars with differing contents of alloying metals were bonded by forge welding, which produced a compound material. Hardening by cold working as well as by torquing was already known to these Celtic craftsmen. To obtain tools with a hard edge and a tough core, cementation was used. (orig.)

  18. Experimental study of tail-span effects on a canard-controlled missile

    Science.gov (United States)

    Blair, A. B., Jr.; Dillon, James L.; Watson, Carolyn B.

    1993-09-01

    An experimental investigation was conducted on a cruciform canard-controlled missile configuration to determine the effects of tail span/canard span ratio on controllability. The investigation was conducted at Mach numbers from 1.75 to 3.50. Reductions of tail span/canard span ratio produced lower static margins and higher trim angle of attack. Results show that canard controls can provide pitch and yaw control as well as roll control by proper selection of the tail span/canard span ratio.

  19. Basic mechanical properties of layered steels

    OpenAIRE

    Michal Černý; Josef Filípek; Pavel Mazal; Petr Dostál

    2013-01-01

    This article deals with identifying attributes of layered steel materials (damask steel) with the help of mechanical tests. Experimentally verify basic mechanical properties of layered steel and subsequently assessed it in comparison with the values obtained for the classic steel materials. In conclusion, there are listed the possibilities of using multilayer steel materials in technical practice, depending on the economics of production.The damask steel was prepared by forge welding from a p...

  20. Milled Die Steel Surface Roughness Correlation with Steel Sheet Friction

    DEFF Research Database (Denmark)

    Berglund, J.; Brown, C.A.; Rosén, B.-G.

    2010-01-01

    This work investigates correlations between the surface topography ofmilled steel dies and friction with steel sheet. Several die surfaces were prepared by milling. Friction was measured in bending under tension testing. Linear regression coefficients (R2) between the friction and texture...

  1. Steels for nuclear power. I

    International Nuclear Information System (INIS)

    Bohusova, O.; Brumovsky, M.; Cukr, B.; Hatle, Z.; Protiva, K.; Stefec, R.; Urban, A.; Zidek, M.

    1976-01-01

    The principles are listed of nuclear reactor operation and the reactors are classified by neutron energy, fuel and moderator designs, purpose and type of moderator. The trend and the development of light-water reactor applications are described. The fundamental operating parameters of the WWER type reactors are indicated. The effect is discussed of neutron radiation on reactor structural materials. The characteristics are described of steel corrosion due to the contact of the steel with steam or sodium in the primary coolant circuit. The reasons for stress corrosion are given and the effects of radiation on corrosion are listed. The requirements and criteria are given for the choice of low-alloy steel for the manufacture of pressure vessels, volume compensators, steam generators, cooling conduits and containment. A survey is given of most frequently used steels for pressure vessels and of the mechanical and structural properties thereof. The basic requirements for the properties of steel used in the primary coolant circuit are as follows: sufficient strength in operating temperature, toughness, good weldability, resistance to corrosion and low brittleness following neutron irradiation. The materials are listed used for the components of light-water and breeder reactors. The production of corrosion-resistant steels is discussed with a view to raw materials, technology, steel-making processes, melting processes, induction furnace steel-making, and to selected special problems of the chemical composition of steels. The effects are mainly discussed of lead, bismuth and tin as well as of some other elements on hot working of high-alloy steels and on their structure. The problems of corrosion-resistant steel welding and of pressure vessel cladding are summed up. Also discussed is the question of the concept and safeguards of the safety of nuclear installation operation and a list is presented of most commonly used nondestructive materials testing methods. The current

  2. Estimation of Curvature Changes for Steel-Concrete Composite Bridge Using Fiber Bragg Grating Sensors

    Directory of Open Access Journals (Sweden)

    Donghoon Kang

    2013-01-01

    Full Text Available This study is focused on the verification of the key idea of a newly developed steel-concrete composite bridge. The key idea of the proposed bridge is to reduce the design moment by applying vertical prestressing force to steel girders, so that a moment distribution of a continuous span bridge is formed in a simple span bridge. For the verification of the key technology, curvature changes of the bridge should be monitored sequentially at every construction stage. A pair of multiplexed FBG sensor arrays is proposed in order to measure curvature changes in this study. They are embedded in a full-scale test bridge and measured local strains, which are finally converted to curvatures. From the result of curvature changes, it is successfully ensured that the key idea of the proposed bridge, expected theoretically, is viable.

  3. Span-Dependent Distributions of the Bending Strength of Spruce Timber

    DEFF Research Database (Denmark)

    Ditlevsen, Ove; Källsner, Bo

    2005-01-01

    Tests data of bending strengths of a large number of timber beams of different spans obtained at the Swedish Institute for Wood Technology Research reveal a statistical structure that can be represented in a simple probabilistic model of series system type. A particular feature of the data from one...... number of defect clusters follows from the obtained distribution model for the bending strength of the random single defect cluster. The empirical distribution function of bending test results for a sample of beams with two defect clusters is well predicted, and for long beams with several defect...... of the large test series is that unintentionally the data became randomly censored upwards. This censoring of the data rules out both the moment estimation method and the maximum likelihood method. Instead valid parameter estimates can be obtained by maximizing the posterior density defined as the likelihood...

  4. Steel designers' handbook

    CERN Document Server

    Gorenc, Branko; Tinyou, Ron

    2012-01-01

    The Revised 7th Edition of Steel Designers' Handbook is an invaluable tool for all practising structural, civil and mechanical engineers as well as engineering students at university and TAFE in Australia and New Zealand. It has been prepared in response to changes in the design Standard AS 4100, the structural Design Actions Standards, AS /ANZ 1170, other processing Standards such as welding and coatings, updated research as well as feedback from users. This edition is based on Australian Standard (AS) 4100: 1998 and subsequent amendments. The worked numerical examples in the book have been e

  5. Mechanics in Steels through Microscopy

    NARCIS (Netherlands)

    Tirumalasetty, G.K.

    2013-01-01

    The goal of the study consolidated in this thesis is to understand the mechanics in steels using microscopy. In particular, the mechanical response of Transformation Induced Plasticity (TRIP) steels is correlated with their microstructures. Chapter 1 introduces the current state of the art of TRIP

  6. corrosion inhibitor for carbon steels

    African Journals Online (AJOL)

    potentiodynamic polarisation techniques. It was found that. CNSL reduces the extent of the electrochemical processes taking place on carbon steel undergoing corrosion. The corrosion rate of the carbon steel was reduced by over 92 % when only 300 ppm of CNSL was applied. This indicates that. CNSL is a potential ...

  7. The industrial ecology of steel

    Energy Technology Data Exchange (ETDEWEB)

    Considine, Timothy J.; Jablonowski, Christopher; Considine, Donita M.M.; Rao, Prasad G.

    2001-03-26

    This study performs an integrated assessment of new technology adoption in the steel industry. New coke, iron, and steel production technologies are discussed, and their economic and environmental characteristics are compared. Based upon detailed plant level data on cost and physical input-output relations by process, this study develops a simple mathematical optimization model of steel process choice. This model is then expanded to a life cycle context, accounting for environmental emissions generated during the production and transportation of energy and material inputs into steelmaking. This life-cycle optimization model provides a basis for evaluating the environmental impacts of existing and new iron and steel technologies. Five different plant configurations are examined, from conventional integrated steel production to completely scrap-based operations. Two cost criteria are used to evaluate technology choice: private and social cost, with the latter including the environmental damages associated with emissions. While scrap-based technologies clearly generate lower emissions in mass terms, their emissions of sulfur dioxide and nitrogen oxides are significantly higher. Using conventional damage cost estimates reported in the literature suggests that the social costs associated with scrap-based steel production are slightly higher than with integrated steel production. This suggests that adopting a life-cycle viewpoint can substantially affect environmental assessment of new technologies. Finally, this study also examines the impacts of carbon taxes on steel production costs and technology choice.

  8. Steel structures for nuclear facilities

    International Nuclear Information System (INIS)

    1993-01-01

    In the guide the requirements concerning design and fabrication of steel structures for nuclear facilities and documents to be submitted to the Finnish Centre for Radiation and Nuclear Safety (STUK) are presented. Furthermore, regulations concerning inspection of steel structures during construction of nuclear facilities and during their operation are set forth

  9. The topology of African exports: Emerging patterns on spanning trees

    Science.gov (United States)

    Araújo, Tanya; Ferreira, Manuel Ennes

    2016-11-01

    This paper is a contribution to interweaving two lines of research that have progressed in separate ways: network analysis of international trade and the literature on African trade and development. Gathering empirical data on African countries has important limitations and so does the space occupied by African countries in the analysis of trade networks. Here, these limitations are dealt with by the definition of two independent bipartite networks: a destination share network and a commodity share network. These networks-together with their corresponding minimal spanning trees-allow to uncover some ordering emerging from African exports in the broader context of international trade. The emerging patterns help to understand important characteristics of African exports and its binding relations to other economic, geographic and organizational concerns as the recent literature on African trade, development and growth has shown.

  10. Spanning the Creative Space between Home and Work

    DEFF Research Database (Denmark)

    Davis, Lee N.; Hoisl, Karin; Davis, Jerome

    the employee brings to work. Based on Woodman et al.’s (1993) “interactionist perspective” on organizational creativity, supplemented by literature on search and knowledge/combination, we explore whether leisure time activities can span the creative space between the employee’s home and workplace – given......This paper explores the link between employee leisure time activities and the value of their creative output. We argue that leisure time activities – both in general, and specifically with regard to the employee’s choice of hobbies – both illuminate and shape the attitudes and attributes...... the range of multi-level inputs that may also contribute to workplace creativity. We use original survey data comprising 4,138 inventions from 21 European countries, the United States and Japan, in all major industries. Organizational creativity is measured by the asset value of the patent on the associated...

  11. Noise Reduction with Optimal Variable Span Linear Filters

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Benesty, Jacob; Christensen, Mads Græsbøll

    2016-01-01

    of eigenvectors stemming from a joint diagonalization of the covariance matrices of the signal of interest and the noise. The resulting filters are flexible in that it is possible to trade off distortion of the desired signal for improved noise reduction. This tradeoff is controlled by the number of eigenvectors...... included in forming the filter. Using these concepts, a number of different filter designs are considered, like minimum distortion, Wiener, maximum SNR, and tradeoff filters. Interestingly, all these can be expressed as special cases of variable span filters. We also derive expressions for the speech...... distortion and noise reduction of the various filter designs. Moreover, we consider an alternative approach, wherein the filter is designed for extracting an estimate of the noise signal, which can then be extracted from the observed signals, which is referred to as the indirect approach. Simulations...

  12. Visual span in expert chess players: evidence from eye movements.

    Science.gov (United States)

    Reingold, E M; Charness, N; Pomplun, M; Stampe, D M

    2001-01-01

    The reported research extends classic findings that after briefly viewing structured, but not random, chess positions, chess masters reproduce these positions much more accurately than less-skilled players. Using a combination of the gaze-contingent window paradigm and the change blindness flicker paradigm, we documented dramatically larger visual spans for experts while processing structured, but not random, chess positions. In addition, in a check-detection task, a minimized 3 x 3 chessboard containing a King and potentially checking pieces was displayed. In this task, experts made fewer fixations per trial than less-skilled players, and had a greater proportion of fixations between individual pieces, rather than on pieces. Our results provide strong evidence for a perceptual encoding advantage for experts attributable to chess experience, rather than to a general perceptual or memory superiority.

  13. Explanations of a magic trick across the life span

    Science.gov (United States)

    Olson, Jay A.; Demacheva, Irina; Raz, Amir

    2015-01-01

    Studying how children and adults explain magic tricks can reveal developmental differences in cognition. We showed 167 children (aged 4–13 years) a video of a magician making a pen vanish and asked them to explain the trick. Although most tried to explain the secret, none of them correctly identified it. The younger children provided more supernatural interpretations and more often took the magician's actions at face value. Combined with a similar study of adults (N = 1008), we found that both young children and older adults were particularly overconfident in their explanations of the trick. Our methodology demonstrates the feasibility of using magic to study cognitive development across the life span. PMID:25798117

  14. Indoor Positioning Using Nonparametric Belief Propagation Based on Spanning Trees

    Directory of Open Access Journals (Sweden)

    Savic Vladimir

    2010-01-01

    Full Text Available Nonparametric belief propagation (NBP is one of the best-known methods for cooperative localization in sensor networks. It is capable of providing information about location estimation with appropriate uncertainty and to accommodate non-Gaussian distance measurement errors. However, the accuracy of NBP is questionable in loopy networks. Therefore, in this paper, we propose a novel approach, NBP based on spanning trees (NBP-ST created by breadth first search (BFS method. In addition, we propose a reliable indoor model based on obtained measurements in our lab. According to our simulation results, NBP-ST performs better than NBP in terms of accuracy and communication cost in the networks with high connectivity (i.e., highly loopy networks. Furthermore, the computational and communication costs are nearly constant with respect to the transmission radius. However, the drawbacks of proposed method are a little bit higher computational cost and poor performance in low-connected networks.

  15. Typology of secondary cyanobacterial metabolites from minimum spanning tree analysis.

    Science.gov (United States)

    Guyot, M; Doré, J C; Devillers, J

    2004-04-01

    Recently, two main events have spurred a rapid increase in cyanobacteria chemical, toxicological, and ecological research. The first deals with the interest in isolating compounds from these organisms as source of active products with potential therapeutic applications. The second pertains the crucial problem of harmful cyanobacterial blooms in the aquatic environments. In this context, 594 secondary metabolites belonging to more than 30 genera of cyanobacteria were retrieved from literature. In order to perform their typology, they were first associated with 87 different molecular archetypes and two orphan classes. These 89 groups of molecular structures were then confronted to minimum spanning tree analysis. Attempts were made to graphically derive chemotaxonomical relationships. The interest of QSAR models for estimating the potential pharmacological interest of the cyanobacterial secondary metabolites was also discussed.

  16. Seismic response computations for a long span bridge

    International Nuclear Information System (INIS)

    McCallen, D.B.

    1994-01-01

    The authors are performing large-scale numerical computations to simulate the earthquake response of a major long-span bridge that crosses the San Francisco Bay. The overall objective of the study is to estimate the response of the bridge to potential large-magnitude earthquakes generated on the nearby San Andreas and Hayward earthquake faults. Generation of a realistic model of the bridge system is complicated by the existence of large pile group foundations that extend deep into soft, saturated clay soils, and by the numerous expansion joints that segment the overall bridge structure. In the current study, advanced, nonlinear, finite element technology is being applied to rigorously model the detailed behavior of the bridge system and to shed light on the influence of the foundations and joints of the bridge

  17. Rényi indices of financial minimum spanning trees

    Science.gov (United States)

    Nie, Chun-Xiao; Song, Fu-Tie; Li, Sai-Ping

    2016-02-01

    The Rényi index is used here to describe topological structures of minimum spanning trees (MSTs) of financial markets. We categorize the topological structures of MSTs as dragon, star and super-star types. The MST based on Geometric Brownian motion is of dragon type, the MST constructed by One-Factor Model is super-star type, and most MSTs based on real market data belong to the star type. The Rényi index of the MST corresponding to S&P500 is evaluated, and the result shows that the Rényi index varies significantly in different time periods. In particular, it rose during crises and dropped when the S&P500 index rose significantly. A comparison study between the CSI300 index of the Chinese market and the S&P500 index shows that the MST structure of the CSI300 index varies more dramatically than the MST structure of the S&P500.

  18. Remote Nondestructive Evaluation of Composite-Steel Interface by Acoustic Laser Vibrometry

    Science.gov (United States)

    2012-06-01

    Rochdale, United Kingdom was built in 1936 with steel girders supporting a reinforced concrete deck. The girders have a free span of 7.62 m (25 ft...41, no. 1 (January 2008): 10-24. Buyukozturk, O., O. Gunes, and K. Erdem. "Progress on understanding debonding problems in reinforced concrete and... reinforced polymer rods." Journal of Composites for Construction 8, no. 1 (2004): 70-78. Luke, S. "The use of carbon fibre plates for the strengthening of two

  19. Steels from materials science to structural engineering

    CERN Document Server

    Sha, Wei

    2013-01-01

    Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels.  The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel.  Researchers studying steels will find the topics vital to their work.  Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development. 

  20. Evaluation of Methods for Estimation of Cyclic Stress-Strain Parameters from Monotonic Properties of Steels

    Directory of Open Access Journals (Sweden)

    Tea Marohnić

    2017-01-01

    Full Text Available Most existing methods for estimation of cyclic yield stress and cyclic Ramberg-Osgood stress-strain parameters of steels from their monotonic properties were developed on relatively modest number of material datasets and without considerations of the particularities of different steel subgroups formed according to their chemical composition (unalloyed, low-alloy, and high-alloy steels or delivery, i.e., testing condition. Furthermore, some methods were evaluated using the same datasets that were used for their development. In this paper, a comprehensive statistical analysis and evaluation of existing estimation methods were performed using an independent set of experimental material data compriseding 116 steels. Results of performed statistical analyses reveal that statistically significant differences exist among unalloyed, low-alloy, and high-alloy steels regarding their cyclic yield stress and cyclic Ramberg-Osgood stress-strain parameters. Therefore, estimation methods were evaluated separately for mentioned steel subgroups in order to more precisely determine their applicability for the estimation of cyclic behavior of steels belonging to individual subgroups. Evaluations revealed that considering all steels as a single group results in averaging and that subgroups should be treated independently. Based on results of performed statistical analysis, guidelines are provided for identification and selection of suitable methods to be applied for the estimation of cyclic stress-strain parameters of steels.

  1. A study on the irradiation embrittlement and recovery characteristics of light water reactor pressure vessel steels

    Energy Technology Data Exchange (ETDEWEB)

    Chi, Se Hwan; Hong, Jun Hwa; Lee, Bong Sang; Oh, Jong Myung; Song, Sook Hyang; Milan, Brumovsky [NRI Czech (Czech Republic)

    1999-03-01

    The neutron irradiation embrittlement phenomenon of light water RPV steels greatly affects the life span for safe operation of a reactor. Reliable evaluation and prediction of the embrittlement of RPV steels, especially of aged reactors, are of importance to the safe operation of a reactor. In addition, the thermal recovery of embrittled RPV has been recognized as an option for life extension. This study aimed to tracer/refine available technologies for embrittlement characterization and prediction, to prepare relevant materials for several domestic RPV steels of the embrittlement and recovery, and to find out possible remedy for steel property betterment. Small specimen test techniques, magnetic measurement techniques, and the Meechan and Brinkmann's recovery curve analysis method were examined/applied as the evaluation techniques. Results revealed a high irradiation sensitivity in YG 3 RPV steel. Further extended study may be urgently needed. Both the small specimen test technique for the direct determination of fracture toughness, and the magnetic measurement technique for embrittlement evaluation appeared to be continued for the technical improvement and data base preparation. Manufacturing process relevant to the heat treatment appeared to be improved in lowering the irradiation sensitivity of the steel. Further study is needed especially in applying the present techniques to the new structural materials under new irradiation environment of advanced reactors. (author)

  2. The Private and Common Benefits of Spanning Structural Holes within the MNE Network

    DEFF Research Database (Denmark)

    Gärber, Lisa Katarina; Pedersen, Torben; Rogbeer, Shalini

    2012-01-01

    It is well established that spanning structural holes creates private benefits through innovation. However, the extent to which other network members profit from spanning structural holes remains unclear. This research considers how subunits that span structural holes within the MNE network reap ...

  3. The composite complex span: French validation of a short working memory task.

    Science.gov (United States)

    Gonthier, Corentin; Thomassin, Noémylle; Roulin, Jean-Luc

    2016-03-01

    Most studies in individual differences in the field of working memory research use complex span tasks to measure working memory capacity. Various complex span tasks based on different materials have been developed, and these tasks have proven both reliable and valid; several complex span tasks are often combined to provide a domain-general estimate of working memory capacity with even better psychometric properties. The present work sought to address two issues. Firstly, having participants perform several full-length complex span tasks in succession makes for a long and tedious procedure. Secondly, few complex span tasks have been translated and validated in French. We constructed a French working memory task labeled the Composite Complex Span (CCS). The CCS includes shortened versions of three classic complex span tasks: the reading span, symmetry span, and operation span. We assessed the psychometric properties of the CCS, including test-retest reliability and convergent validity, with Raven's Advanced Progressive Matrices and with an alpha span task; the CCS demonstrated satisfying qualities in a sample of 1,093 participants. This work provides evidence that shorter versions of classic complex span tasks can yield valid working memory estimates. The materials and normative data for the CCS are also included.

  4. Developmental Change in the Relation between Simple and Complex Spans: A Meta-Analysis

    Science.gov (United States)

    Tillman, Carin M.

    2011-01-01

    In the present meta-analysis the effects of developmental level on the correlation between simple and complex span tasks were investigated. Simple span-complex span correlation coefficients presented in 52 independent samples (7,060 participants) were regressed on a variable representing mean age of sample (range: 4.96-22.80 years), using analyses…

  5. Fatigue Life Assessment of Orthotropic Steel Deck with UHPC Pavement

    Directory of Open Access Journals (Sweden)

    Xu Jiang

    2017-01-01

    Full Text Available In recent years, a number of large-span bridges with orthotropic steel decks were constructed in China. With increasing traffic volumes and higher wheel loads, many fatigue cracks developed at the welds and the edge of cut-out holes. This paper aims at presenting the numerical analysis on the fatigue performance of the orthotropic steel deck using ultrahigh performance concrete (UHPC overlay as the deck pavement instead of the conventional asphalt concrete pavement. By using finite element method (FEM model, stress distribution at fatigue sensitive locations under the action of wheel loads is characterized and the obtained stress ranges indicate that the UHPC pavement significantly reduces the magnitude of the stress peak valued. A suggested truck stream model based on the weigh-in-motion (WIM data of four bridges in China is employed to calculate the stress variation at specific fatigue details. Furthermore, the fatigue damage accumulation at fatigue details under the UHPC and conventional asphalt concrete pavement is studied based on Miner’s linear cumulative damage rule and the rain-flow method. The results indicate that the UHPC pavement on the orthotropic steel deck can extend the service lives of the concerned regions over 100 years, but the fatigue lives will reduce significantly when the elastic modulus of UHPC decreases to 50% of the original value.

  6. Behaviour of Steel Fibre Reinforced Rubberized Continuous Deep Beams

    Science.gov (United States)

    Sandeep, MS; Nagarajan, Praveen; Shashikala, A. P.

    2018-03-01

    Transfer girders and pier caps, which are in fact deep beams, are critical structural elements present in high-rise buildings and bridges respectively. During an earthquake, failure of lifeline structures like bridges and critical structural members like transfer girders will result in severe catastrophes. Ductility is the key factor that influences the resistance of any structural member against seismic action. Structural members cast using materials having higher ductility will possess higher seismic resistance. Previous research shows that concrete having rubber particles (rubcrete) possess better ductility and low density in comparison to ordinary concrete. The main hindrance to the use of rubcrete is the reduction in compressive and tensile strength of concrete due to the presence of rubber. If these undesirable properties of rubcrete can be controlled, a new cementitious composite with better ductility, seismic performance and economy can be developed. A combination of rubber particles and steel fibre has the potential to reduce the undesirable effect of rubcrete. In this paper, the effect of rubber particles and steel fibre in the behaviour of two-span continuous deep beams is studied experimentally. Based on the results, optimum proportions of steel fibre and rubber particles for getting good ductile behaviour with less reduction in collapse load is found out.

  7. Magnetism and Microstructure Characterization of Phase Transitions in a Steel

    Directory of Open Access Journals (Sweden)

    M. Güler

    2014-01-01

    Full Text Available We present phase transitions in a low carbon steel according to existing phases and their magnetism. Scanning electron microscope employed research to clarify and evaluate the microstructural details. Additionally, we utilized from Mössbauer spectroscopy for magnetic characteristics of different existed phases. Scanning electron microscope examinations showed that the pure state of the steel was fully in the ferrite phase with equiaxed grains. Moreover, subsequent heat treatments on the studied steel also ensured the first austenite and then pearlite phase formation. Mössbauer spectroscopy of these phases appeared as a paramagnetic single-line absorption peak for the austenite phase and ferromagnetic six-line spectra for both ferrite and pearlite phases. From Mössbauer data, we determined that the internal magnetic fields of ferrite and pearlite phases were as 32.2 Tesla and 31.3 Tesla, respectively.

  8. Fire-induced collapse mechanisms of steel buildings

    DEFF Research Database (Denmark)

    Giuliani, Luisa; Aiuti, Riccardo; Bontempi, Franco

    2013-01-01

    and eigen-stresses induced by a restrained thermal expansion are not considered by current design methods and regulations, but are known to have driven the collapse of several steel and composite structures. In this study, the effect of restrained thermal expansions of steel beams exposed to fire......This paper presents a study on the failure modes of steel building in fire, with the aim of identify basic collapse mechanisms and design characteristics that play a role in the development and propagation of failures through the structural system. In particular, the effect of deformations...... favour an outward collapse of the structures in case of fire. The consideration of failure modes of single story buildings is not required by current codes. However, an outward structural collapse represents a serious hazard, as it endanger people and premises on the outside. Such an occurrence should...

  9. Influence of steel fibres on the blast response of normal-strength and high-strength reinforced concrete columns

    Science.gov (United States)

    Hammoud, A.; Aoude, H.

    2017-09-01

    This paper examines the influence of steel fibres on the blast performance of normal-strength concrete and high-strength concrete columns. As part of the study, four normal-strength and high-strength concrete columns built with and without steel fibres are tested under simulated blast loads using the shock-tube facility at the University of Ottawa. The specimens include two columns built with plain concrete and two columns built with steel fibre-reinforced concrete. The results show that the addition of steel fibres in reinforced concrete columns leads to important enhancements in blast performance, with improved control of mid-span displacements at equivalent blasts and increased damage tolerance.

  10. Method development to evaluate steel fiber performance in concrete with expansive additives under restrained hardening conditions: preliminary results

    Science.gov (United States)

    Lukasenoks, A.; Cepuritis, R.

    2017-10-01

    Novel steel molds in form of a rigid cubical shell were developed in order to investigate single steel fiber pull-out resistance in concrete with expansive additive under restrained hardening conditions. The developed steel molds simulate internal (from steel fibers) and external (from friction against sub-base) restraints that hinder expansion of the concrete in a flooring slab structure installed on ground. Samples with a single hooked-end steel fiber, with and without expansive additive were manufactured and tested in the developed mold geometry. The results show that restrained concrete expansion positively affects single fiber pull-out behavior, i.e. fiber delamination resistance is increased by 29.7 % and pull-out peak load by 10.8 %.

  11. 49 CFR 192.55 - Steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Steel pipe. 192.55 Section 192.55 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.55 Steel pipe. (a) New steel pipe is... in accordance with paragraph (c) or (d) of this section. (b) Used steel pipe is qualified for use...

  12. Visual working memory span in adults with cochlear implants: Some preliminary findings

    Directory of Open Access Journals (Sweden)

    Aaron C. Moberly

    2017-12-01

    Full Text Available Objective: Neurocognitive functions, specifically verbal working memory (WM, contribute to speech recognition in postlingual adults with cochlear implants (CIs and normal-hearing (NH listener shearing degraded speech. Three hypotheses were tested: (1 WM accuracy as assessed using three visual span measures — digits, objects, and symbols — would correlate with recognition scores for spectrally degraded speech (through a CI or when noise-vocoded; (2 WM accuracy would be best for digit span, intermediate for object span, and lowest for symbol span, due to the increasing cognitive demands across these tasks. Likewise, response times, relating to processing demands, would be shortest for digit span, intermediate for object span, and longest for symbol span; (3 CI users would demonstrate poorer and slower performance than NH peers on WM tasks, as a result of less efficient verbally mediated encoding strategies associated with a period of prolonged auditory deprivation. Methods: Cross-sectional study of 30 postlingually deaf adults with CIs and 34 NH controls. Participants were tested for sentence recognition in quiet (CI users or after noise-vocoding (NH peers, along with WM using visual measures of digit span, object span, and symbol span. Results: Of the three measures of WM, digit span scores alone correlated with sentence recognition for CI users; no correlations were found using these three measures for NH peers. As predicted, WM accuracy (and response times were best (and fastest for digit span, intermediate for object span, and worst (and slowest for symbol span. CI users and NH peers demonstrated equivalent WM accuracy and response time for digit span and object span, and similar response times for symbol span, but contrary to our original predictions, CI users demonstrated better accuracy on symbol span than NH peers. Conclusions: Verbal WM assessed using visual tasks relates weakly to sentence recognition for degraded speech. CI users

  13. Methods of making bainitic steel materials

    Energy Technology Data Exchange (ETDEWEB)

    Bakas, Michael Paul; Chu, Henry Shiu-Hung; Zagula, Thomas Andrew; Langhorst, Benjamin Robert

    2018-01-16

    Methods of making bainitic steels may involve austenitizing a quantity of steel by exposing the quantity of steel to a first temperature. A composition of the quantity of steel may be configured to impede formation of non-bainite ferrite, pearlite, and Widmanstatten ferrite. The quantity of steel may be heat-treated to form bainite by exposing the quantity of steel to a second, lower temperature. The second, lower temperature may be stabilized by exposing the quantity of steel to the second, lower temperature in the presence of a thermal ballast.

  14. Stahlschüssel key to steel

    CERN Document Server

    Wegst, W S

    2016-01-01

    The Key to Steel (Stahlschlüssel/Stahlschluessel) cross reference book will help you to decode / decipher steel designations and find equivalent materials worldwide. The 2016 edition includes more than 70,000 standard designations and trade names from approximately 300 steelmakers and suppliers. Presentation is trilingual: English, French, and German. Materials covered include structural steels, tool steels, valve steels, high temperature steels and alloys, stainless and heat-resisting steels, and more. Standards and designations from 25 countries are cross-referenced.

  15. Advanced steel reheat furnace

    Energy Technology Data Exchange (ETDEWEB)

    Moyeda, D.; Sheldon, M.; Koppang, R. [Energy and Environmental Research Corp., Irvine, CA (United States); Lanyi, M.; Li, X.; Eleazer, B. [Air Products and Chemicals, Inc., Allentown, PA (United States)

    1997-10-01

    Energy and Environmental Research Corp. (EER) under a contract from the Department of Energy is pursuing the development and demonstration of an Advanced Steel Reheating Furnace. This paper reports the results of Phase 1, Research, which has evaluated an advanced furnace concept incorporating two proven and commercialized technologies previously applied to other high temperature combustion applications: EER`s gas reburn technology (GR) for post combustion NOx control; and Air Product`s oxy-fuel enrichment air (OEA) for improved flame heat transfer in the heating zones of the furnace. The combined technologies feature greater production throughput with associated furnace efficiency improvements; lowered NOx emissions; and better control over the furnace atmosphere, whether oxidizing or reducing, leading to better control over surface finish.

  16. Cold-formed steel design

    CERN Document Server

    Yu, Wei-Wen

    2010-01-01

    The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Fourth Edition of the classic text provides you with more of the detailed, up-to-the-minute techni

  17. Steel fiber replacement of mild steel in prestressed concrete beams

    Science.gov (United States)

    2010-10-01

    In traditional prestressed concrete beams, longitudinal prestressed tendons serve to resist bending moment and : transverse mild steel bars (or stirrups) are used to carry shear forces. However, traditional prestressed concrete I-beams : exhibit earl...

  18. Steel fiber replacement of mild steel in prestressed concrete beams.

    Science.gov (United States)

    2011-01-01

    In traditional prestressed concrete beams, longitudinal prestressed tendons serve to resist bending moment and transverse mild : steel bars (or stirrups) are used to carry shear forces. However, traditional prestressed concrete I-beams exhibit early-...

  19. The span of correlations in dolphin whistle sequences

    Science.gov (United States)

    Ferrer-i-Cancho, Ramon; McCowan, Brenda

    2012-06-01

    Long-range correlations are found in symbolic sequences from human language, music and DNA. Determining the span of correlations in dolphin whistle sequences is crucial for shedding light on their communicative complexity. Dolphin whistles share various statistical properties with human words, i.e. Zipf's law for word frequencies (namely that the probability of the ith most frequent word of a text is about i-α) and a parallel of the tendency of more frequent words to have more meanings. The finding of Zipf's law for word frequencies in dolphin whistles has been the topic of an intense debate on its implications. One of the major arguments against the relevance of Zipf's law in dolphin whistles is that it is not possible to distinguish the outcome of a die-rolling experiment from that of a linguistic or communicative source producing Zipf's law for word frequencies. Here we show that statistically significant whistle-whistle correlations extend back to the second previous whistle in the sequence, using a global randomization test, and to the fourth previous whistle, using a local randomization test. None of these correlations are expected by a die-rolling experiment and other simple explanations of Zipf's law for word frequencies, such as Simon's model, that produce sequences of unpredictable elements.

  20. Update on a Solar Magnetic Catalog Spanning Four Solar Cycles

    Science.gov (United States)

    Vargas-Acosta, Juan Pablo; Munoz-Jaramillo, Andres; Vargas Dominguez, Santiago; Werginz, Zachary; DeLuca, Michael D.; Longcope, Dana; Harvey, J. W.; Windmueller, John; Zhang, Jie; Martens, Petrus C.

    2017-08-01

    Bipolar magnetic regions (BMRs) are the cornerstone of solar cycle propagation, the building blocks that give structure to the solar atmosphere, and the origin of the majority of space weather events. However, in spite of their importance, there is no homogeneous BMR catalog spanning the era of systematic solar magnetic field measurements. Here we present the results of an ongoing project to address this deficiency applying the Bipolar Active Region Detection (BARD) code to magnetograms from the 512 Channel of the Kitt Peak Vaccum Telescope, SOHO/MDI, and SDO/HMI.The BARD code automatically identifies BMRs and tracks them as they are rotated by differential rotation. The output of the automatic detection is supervised by a human observer to correct possible mistakes made by the automatic algorithm (like incorrect pairings and tracking mislabels). Extra passes are made to integrate fragmented regions as well as to balance the flux between BMR polarities. At the moment, our BMR database includes nearly 10,000 unique objects (detected and tracked) belonging to four separate solar cycles (21-24).

  1. Childhood Self-Control and Unemployment Throughout the Life Span

    Science.gov (United States)

    Delaney, Liam; Egan, Mark; Baumeister, Roy F.

    2015-01-01

    The capacity for self-control may underlie successful labor-force entry and job retention, particularly in times of economic uncertainty. Analyzing unemployment data from two nationally representative British cohorts (N = 16,780), we found that low self-control in childhood was associated with the emergence and persistence of unemployment across four decades. On average, a 1-SD increase in self-control was associated with a reduction in the probability of unemployment of 1.4 percentage points after adjustment for intelligence, social class, and gender. From labor-market entry to middle age, individuals with low self-control experienced 1.6 times as many months of unemployment as those with high self-control. Analysis of monthly unemployment data before and during the 1980s recession showed that individuals with low self-control experienced the greatest increases in unemployment during the recession. Our results underscore the critical role of self-control in shaping life-span trajectories of occupational success and in affecting how macroeconomic conditions affect unemployment levels in the population. PMID:25870404

  2. The span of correlations in dolphin whistle sequences

    International Nuclear Information System (INIS)

    Ferrer-i-Cancho, Ramon; McCowan, Brenda

    2012-01-01

    Long-range correlations are found in symbolic sequences from human language, music and DNA. Determining the span of correlations in dolphin whistle sequences is crucial for shedding light on their communicative complexity. Dolphin whistles share various statistical properties with human words, i.e. Zipf's law for word frequencies (namely that the probability of the ith most frequent word of a text is about i −α ) and a parallel of the tendency of more frequent words to have more meanings. The finding of Zipf's law for word frequencies in dolphin whistles has been the topic of an intense debate on its implications. One of the major arguments against the relevance of Zipf's law in dolphin whistles is that it is not possible to distinguish the outcome of a die-rolling experiment from that of a linguistic or communicative source producing Zipf's law for word frequencies. Here we show that statistically significant whistle–whistle correlations extend back to the second previous whistle in the sequence, using a global randomization test, and to the fourth previous whistle, using a local randomization test. None of these correlations are expected by a die-rolling experiment and other simple explanations of Zipf's law for word frequencies, such as Simon's model, that produce sequences of unpredictable elements

  3. Nanogels as imaging agents for modalities spanning the electromagnetic spectrum.

    Science.gov (United States)

    Chan, Minnie; Almutairi, Adah

    2016-01-21

    In the past few decades, advances in imaging equipment and protocols have expanded the role of imaging in in vivo diagnosis and disease management, especially in cancer. Traditional imaging agents have rapid clearance and low specificity for disease detection. To improve accuracy in disease identification, localization and assessment, novel nanomaterials are frequently explored as imaging agents to achieve high detection specificity and sensitivity. A promising material for this purpose are hydrogel nanoparticles, whose high hydrophilicity, biocompatibility, and tunable size in the nanometer range make them ideal for imaging. These nanogels (10 to 200 nm) can circumvent uptake by the reticuloendothelial system, allowing longer circulation times than small molecules. In addition, their size/surface properties can be further tailored to optimize their pharmacokinetics for imaging of a particular disease. Herein, we provide a comprehensive review of nanogels as imaging agents in various modalities with sources of signal spanning the electromagnetic spectrum, including MRI, NIR, UV-vis, and PET. Many materials and formulation methods will be reviewed to highlight the versatility of nanogels as imaging agents.

  4. Structure and properties of quenched low-carbon steel in case of plastic deformation and tempering

    International Nuclear Information System (INIS)

    Babich, V.K.; Drozdov, B.Ya.; Pirogov, V.A.; Plevako, P.S.

    1977-01-01

    The investigation of the processes taking place during the deformation and the tempering of grade 20 hardened steel has shown that the plastic deformation involves an increase in hardness and a drop in coercive force. The latter is due to a displacement of carbon atoms from normal interstitial locations to crystalline lattice imperfection sites. The effect of tempering has been studied on steels not worked and on those worked by 20 and 40 % after hardening. It is found that the tempering of a cold-worked steel is accompanied by a recrystallization which makes itself evident at 500 deg C after 40 % deformation and at 600 deg C after 20 % deformation. The stability of the low-carbon steel martensite during the recrsytallization is due to the absence of a substantial excess of dislocations of a single sign, and not to the inhibiting effect of the carbide particles. The heterogeneity of the structure produced by the hardening facilitates recrystallization of deformed steel

  5. The effects of age on processing and storage in working memory span tasks and reading comprehension.

    Science.gov (United States)

    Schroeder, Paul J

    2014-01-01

    BACKGROUND/STUDY CONTEXT: Declines in verbal working memory span task performance have been associated with deficits in the language processing abilities of healthy older adults, but it is unclear how storage and processing contribute to this relationship. Moreover, recent studies of the psychometric properties of span measures in the general cognitive literature highlight the need for a critical reassessment of age-related differences in working memory task performance. Forty-two young (Mage = 19.45 years) and 42 older participants (Mage = 73.00 years) completed a series of neuropsychological screening measures, four memory span tasks (one-syllable word span, three-syllable word span, reading span, and sentence span), and a measure of reading comprehension. Each span measure was completed under self-paced and timed encoding conditions. A 2 (age) × 2 (task type) × 2 (encoding conditions) mixed-model design was used. (1) Age effects were reliable for both simple and complex span task performance; (2) limiting the available encoding time yielded lower recall scores across tasks and exacerbated age differences in simple span performance; and (3) both encoding condition and age affected the relationship between each of the span measures and the relationship between span and reading comprehension. Declines in both storage and processing abilities contributed to age differences in span task performance and the relationship between span and reading comprehension. Although older people appear to benefit from task administration protocols that promote successful memory encoding, researchers should be aware of the potential risks to validity posed by such accommodations.

  6. CHANGES IN DISTRIBUTION OF STEEL PRODUCTS

    OpenAIRE

    Beata Œlusarczyk

    2009-01-01

    Steel industry is one of the most globalized branch, globalization has had the influence on iron ore supply, steel production and distribution as well. In last years, steel products distribution process has changed significantly, because of rising competitiveness due to common world market influence and main global players actions. The paper presents changes in steel products distribution in Poland focusing on main steel producers activity in distribution as well as distributors response on n...

  7. Stably accessing octave-spanning microresonator frequency combs in the soliton regime.

    Science.gov (United States)

    Li, Qing; Briles, Travis C; Westly, Daron A; Drake, Tara E; Stone, Jordan R; Ilic, B Robert; Diddams, Scott A; Papp, Scott B; Srinivasan, Kartik

    2017-02-01

    Microresonator frequency combs can be an enabling technology for optical frequency synthesis and timekeeping in low size, weight, and power architectures. Such systems require comb operation in low-noise, phase-coherent states such as solitons, with broad spectral bandwidths (e.g., octave-spanning) for self-referencing to detect the carrier-envelope offset frequency. However, accessing such states is complicated by thermo-optic dispersion. For example, in the Si 3 N 4 platform, precisely dispersion-engineered structures can support broadband operation, but microsecond thermal time constants often require fast pump power or frequency control to stabilize the solitons. In contrast, here we consider how broadband soliton states can be accessed with simple pump laser frequency tuning, at a rate much slower than the thermal dynamics. We demonstrate octave-spanning soliton frequency combs in Si 3 N 4 microresonators, including the generation of a multi-soliton state with a pump power near 40 mW and a single-soliton state with a pump power near 120 mW. We also develop a simplified two-step analysis to explain how these states are accessed without fast control of the pump laser, and outline the required thermal properties for such operation. Our model agrees with experimental results as well as numerical simulations based on a Lugiato-Lefever equation that incorporates thermo-optic dispersion. Moreover, it also explains an experimental observation that a member of an adjacent mode family on the red-detuned side of the pump mode can mitigate the thermal requirements for accessing soliton states.

  8. Increased deficit of visual attention span with development in Chinese children with developmental dyslexia.

    Science.gov (United States)

    Zhao, Jing; Liu, Menglian; Liu, Hanlong; Huang, Chen

    2018-02-16

    It has been suggested that orthographic transparency and age changes may affect the relationship between visual attention span (VAS) deficit and reading difficulty. The present study explored the developmental trend of VAS in children with developmental dyslexia (DD) in Chinese, a logographic language with a deep orthography. Fifty-seven Chinese children with DD and fifty-four age-matched normal readers participated. The visual 1-back task was adopted to examine VAS. Phonological and morphological awareness tests, and reading tests in single-character and sentence levels were used for reading skill measurements. Results showed that only high graders with dyslexia exhibited lower accuracy than the controls in the VAS task, revealing an increased VAS deficit with development in the dyslexics. Moreover, the developmental trajectory analyses demonstrated that the dyslexics seemed to exhibit an atypical but not delayed pattern in their VAS development as compared to the controls. A correlation analysis indicated that VAS was only associated with morphological awareness for dyslexic readers in high grades. Further regression analysis showed that VAS skills and morphological awareness made separate and significant contributions to single-character reading for high grader with dyslexia. These findings suggested a developmental increasing trend in the relationship between VAS skills and reading (dis)ability in Chinese.

  9. Stainless steel reinforcement as a replacement for epoxy coated steel in bridge decks : final report.

    Science.gov (United States)

    2013-08-01

    The corrosion resistance of 2304 stainless steel reinforcement and stainless steel clad reinforcement was compared to conventional and epoxy-coated reinforcement (ECR). 2304 stainless steel was tested in both the as-received condition (dark mottled f...

  10. Microstructure–hardness relationship in the fusion zone of TRIP steel welds

    International Nuclear Information System (INIS)

    Nayak, S.S.; Baltazar Hernandez, V.H.; Okita, Y.; Zhou, Y.

    2012-01-01

    Highlights: ► Fusion zone of TRIP steels in resistance spot welding was analyzed. ► Transmission electron microscopy (TEM) was used for characterizing microstructure. ► Fusion zone microstructure was found to depend on the chemistry. ► Hardness values were in accordance with the microstructural constituents in the fusion zone. - Abstract: Fusion zone of three TRIP steels, categorized as AT: C–Mn–Al, AST: C–Mn–Al–Si and ST: C–Mn–Si, in resistance spot welding was characterized with respect to microstructure, phase analysis, and hardness. The fusion zone microstructure was found to depend on chemistry: (i) AT steel contained ferrite phase surrounded by bainite and martensite regions, (ii) AST steel showed a bainite structures along with martensite laths and interlath retained austenite, whereas (iii) ST steel constituted single phase martensite laths with interlath austenite. X-ray diffraction study indicated that retained austenite fraction in the fusion zone increases with increase in Si content in it. The AST fusion zone hardness lies between those of the AT and ST steels; the ST fusion zone hardness was higher than that of AT steel because of the single phase martensite microstructure. Comparison of fusion zone microstructure and hardness to earlier study on laser welding of the TRIP steels with similar chemistries revealed that higher cooling rate in resistance spot welding led to higher fusion zone hardness compared to laser welding; which was attributed either to decrease in softer ferrite phase (AT steel) in the microstructure or refinement of martensite laths (ST steel).

  11. A Tale of Wootz Steel

    Indian Academy of Sciences (India)

    /fulltext/reso/011/06/0067-0077. Keywords. Wootz steel; Damascus swords; Cyril Stanley Smith. Author Affiliations. S Ranganathan1 Sharada Srinivasan1. School of Humanities National Institute of Advanced Studies Bangalore 560 012, India ...

  12. Dynamic behavior of multi-span bridges under moving loads with focusing on the effect of the coupling conditions between spans

    Science.gov (United States)

    Xu, Hongan; Li, Wen L.

    2008-05-01

    This study is concerned with the dynamic behavior of generic multi-span bridges under the action of moving loads. In this multi-span bridge model, each span can be independently supported by up to eight elastic springs, thus allowing a more general and realistic representation of many joints and intermediate supports of practical interest. Additionally, since the displacement and its first derivative are no longer required to be continuous at an intermediate support or at the junctions of spans, this model is capable of accounting for the possible steps and skew angles at these locations which are important to studying the vehicle-bridge interactions. Numerical results are presented with a focus on the dynamic impact of the coupling conditions between spans. It has been shown that the deflection on each span strongly depends upon its local coupling conditions, especially near the critical stiffness values. A fairly large variance of response has also been observed on each span in correspondence to a wide range of stiffness values, which implies a good potential for improving bridge performance through modifying joint parameters or coupling configurations. This model can be readily applied to any boundary and coupling conditions with no need of modifying the formulations or solution procedures.

  13. Steel refining possibilities in LF

    Science.gov (United States)

    Dumitru, M. G.; Ioana, A.; Constantin, N.; Ciobanu, F.; Pollifroni, M.

    2018-01-01

    This article presents the main possibilities for steel refining in Ladle Furnace (LF). These, are presented: steelmaking stages, steel refining through argon bottom stirring, online control of the bottom stirring, bottom stirring diagram during LF treatment of a heat, porous plug influence over the argon stirring, bottom stirring porous plug, analysis of porous plugs disposal on ladle bottom surface, bottom stirring simulation with ANSYS, bottom stirring simulation with Autodesk CFD.

  14. Atmospheric corrosion of mild steel

    OpenAIRE

    Morcillo, M.; de la Fuente, D.; Díaz, I.; Cano, H.

    2011-01-01

    The atmospheric corrosion of mild steel is an extensive topic that has been studied by many authors in different regions throughout the world. This compilation paper incorporates relevant publications on the subject, in particular about the nature of atmospheric corrosion products, mechanisms of atmospheric corrosion and kinetics of the atmospheric corrosion process, paying special attention to two matters upon which relatively less information has been published: a) the morphology of steel c...

  15. Influence of steel fibers on the shear and flexural performance of high-strength concrete beams tested under blast loads

    Science.gov (United States)

    Algassem, O.; Li, Y.; Aoude, H.

    2017-09-01

    This paper presents the results of a study examining the effect of steel fibres on the blast behaviour of high-strength concrete beams. As part of the study, a series of three large-scale beams built with high-strength concrete and steel fibres are tested under simulated blast loading using the shock-tube testing facility at the University of Ottawa. The specimens include two beams built with conventional high-strength concrete (HSC) and one beam built with high-strength concrete and steel fibres (HSFRC). The effect of steel fibres on the blast behaviour is examined by comparing the failure mode, mid-span displacements and, overall blast resistance of the specimens. The results show that the addition of steel fibres in high-strength concrete beams can prevent shear failure and substitute for shear reinforcement if added in sufficient quantity. Moreover, the use of steel fibres improves flexural response under blast loading by reducing displacements and increasing blast capacity. Finally, the provision of steel fibres is found to improve the fragmentation resistance of high-strength concrete under blast loads.

  16. MICROALLOYED STEELS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Debanshu Bhattacharya

    2014-12-01

    Full Text Available Two major drivers for the use of newer steels in the automotive industry are fuel efficiency and increased safety performance. Fuel efficiency is mainly a function of weight of steel parts, which in turn, is controlled by gauge and design. Safety is determined by the energy absorbing capacity of the steel used to make the part. All of these factors are incentives for the U.S. automakers to use both Highly Formable and Advanced High Strength Steels (AHSS to replace the conventional steels used to manufacture automotive parts in the past. AHSS is a general term used to describe various families of steels. The most common AHSS is the dual-phase steel that consists of a ferrite-martensite microstructure. These steels are characterized by high strength, good ductility, low tensile to yield strength ratio and high bake hardenability. Another class of AHSS is the complex-phase or multi-phase steel which has a complex microstructure consisting of various phase constituents and a high yield to tensile strength ratio. Transformation Induced Plasticity (TRIP steels is another class of AHSS steels finding interest among the U.S. automakers. These steels consist of a ferrite-bainite microstructure with significant amount of retained austenite phase and show the highest combination of strength and elongation, so far, among the AHSS in use. High level of energy absorbing capacity combined with a sustained level of high n value up to the limit of uniform elongation as well as high bake hardenability make these steels particularly attractive for safety critical parts and parts needing complex forming. A relatively new class of AHSS is the Quenching and Partitioning (Q&P steels. These steels seem to offer higher ductility than the dual-phase steels of similar strengths or similar ductility as the TRIP steels at higher strengths. Finally, martensitic steels with very high strengths are also in use for certain parts. The most recent initiative in the area of AHSS

  17. 46 CFR 59.20-1 - Carbon-steel or alloy-steel castings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Carbon-steel or alloy-steel castings. 59.20-1 Section 59... BOILERS, PRESSURE VESSELS AND APPURTENANCES Welding Repairs to Castings § 59.20-1 Carbon-steel or alloy-steel castings. Defects in carbon-steel or alloy-steel castings may be repaired by welding. The repairs...

  18. Mechanical Behaviour and Microstructural Characterization of Carbon Steel Samples from Three Selected Steel Rolling Plants

    OpenAIRE

    P. O. Atanda; A. A. Abioye; A. O. Iyiola

    2015-01-01

    The research investigated the mechanical behavior of samples of steel rods obtained from three selected Steel Rolling Companies in South Western part of Nigeria. This was done by carrying out some mechanical tests such as tensile, impact and hardness as well as microstructural examination.Four sets of 16 mm steel rod samples were collected from Tiger steel industries, Phoenix steel and Oxil steel Industies, all located in South West Nigeria, The chemical composition was carried out using a...

  19. What item response theory can tell us about the complex span tasks.

    Science.gov (United States)

    Draheim, Christopher; Harrison, Tyler L; Embretson, Susan E; Engle, Randall W

    2018-01-01

    Working memory capacity is an important construct in psychology because of its relationship with many higher-order cognitive abilities and psychopathologies. Working memory capacity is often measured using a type of paradigm known as complex span. Some recent work has focused on shortening the administration time of the complex span tasks, resulting in different versions of these tasks being used (Foster et al., 2015; Oswald, McAbee, Redick, & Hambrick, 2015). Variations in the complex span tasks, such as the number of set sizes, can lead to varying power to discriminate individuals at different ability levels. Thus, research findings may be inconsistent across populations due to differing appropriateness for the ability levels. The present study uses a combination of item response theory and correlational analyses to better understand the psychometric properties of the operation span, symmetry span, and rotation span. The findings show that the typical administration of these tasks, particularly the operation span, is not suitable for above average ability samples (Study 1; n = 573). When larger set sizes are added to the tasks (Study 2; n = 351), predictive validity and discriminability is improved for all complex span tasks, however the operation span is still inferior to the spatial tasks. The authors make several conclusions about which tasks and set sizes should be used depending on the intended population, and further suggest avoiding the standard-length operation span for average or higher ability populations. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Study of biocompatibility of medical grade high nitrogen nickel-free austenitic stainless steel in vitro.

    Science.gov (United States)

    Li, Menghua; Yin, Tieying; Wang, Yazhou; Du, Feifei; Zou, Xingzheng; Gregersen, Hans; Wang, Guixue

    2014-10-01

    Adverse effects of nickel ions being released into the living organism have resulted in development of high nitrogen nickel-free austenitic stainless steels for medical applications. Nitrogen not only replaces nickel for austenitic structure stability but also improves steel properties. The cell cytocompatibility, blood compatibility and cell response of high nitrogen nickel-free austenitic stainless steel were studied in vitro. The mechanical properties and microstructure of this stainless steel were compared to the currently used 316L stainless steel. It was shown that the new steel material had comparable basic mechanical properties to 316L stainless steel and preserved the single austenite organization. The cell toxicity test showed no significant toxic side effects for MC3T3-E1 cells compared to nitinol alloy. Cell adhesion testing showed that the number of MC3T3-E1 cells was more than that on nitinol alloy and the cells grew in good condition. The hemolysis rate was lower than the national standard of 5% without influence on platelets. The total intracellular protein content and ALP activity and quantification of mineralization showed good cell response. We conclude that the high nitrogen nickel-free austenitic stainless steel is a promising new biomedical material for coronary stent development. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Experimental modeling of flow-induced vibration of multi-span U-tubes in a CANDU steam generator

    International Nuclear Information System (INIS)

    Mohany, A.; Feenstra, P.; Janzen, V.P.; Richard, R.

    2009-01-01

    Flow-induced vibration of the tubes in a nuclear steam generator is a concern for designers who are trying to increase the life span of these units. The dominant excitation mechanisms are fluidelastic instability and random turbulence excitation. The outermost U-bend region of the tubes is of greatest concern because the flow is almost perpendicular to the tube axis and the unsupported span is relatively long. The support system in this region must be well designed in order to minimize fretting wear of the tubes at the support locations. Much of the previous testing was conducted on straight single-span or cantilevered tubes in cross-flow. However, the dynamic response of steam generator multi-span U-tubes with clearance supports is expected to be different. Accurate modeling of the tube dynamics is important to properly simulate the dynamic interaction of the tube and supports. This paper describes a test program that was developed to measure the dynamic response of a bundle of steam generator U-tubes with Anti-Vibration Bar (AVB) supports, subjected to Freon two-phase cross-flow. The tube bundle has similar geometrical conditions to those expected for future CANDU steam generators. Future steam generators will be larger than previous CANDU steam generators, nearly twice the heat transfer area, with significant changes in process conditions in the U-bend region, such as increased steam quality and a broader range of flow velocities. This test program was initiated at AECL to demonstrate that the tube support design for future CANDU steam generators will meet the stringent requirements associated with a 60 year design life. The main objective of the tests is to address the issue of in-plane and out-of-plane fluidelastic instability and random turbulent excitation of a U-tube bundle with Anti-Vibration Bar (AVB) supports. Details of the test rig, measurement techniques and preliminary instrumentation results are described in the paper. (author)

  2. Novel Degree Constrained Minimum Spanning Tree Algorithm Based on an Improved Multicolony Ant Algorithm

    Directory of Open Access Journals (Sweden)

    Xuemei Sun

    2015-01-01

    Full Text Available Degree constrained minimum spanning tree (DCMST refers to constructing a spanning tree of minimum weight in a complete graph with weights on edges while the degree of each node in the spanning tree is no more than d (d ≥ 2. The paper proposes an improved multicolony ant algorithm for degree constrained minimum spanning tree searching which enables independent search for optimal solutions among various colonies and achieving information exchanges between different colonies by information entropy. Local optimal algorithm is introduced to improve constructed spanning tree. Meanwhile, algorithm strategies in dynamic ant, random perturbations ant colony, and max-min ant system are adapted in this paper to optimize the proposed algorithm. Finally, multiple groups of experimental data show the superiority of the improved algorithm in solving the problems of degree constrained minimum spanning tree.

  3. Life Span Extension and Neuronal Cell Protection by Drosophila Nicotinamidase*S⃞

    OpenAIRE

    Balan, Vitaly; Miller, Gregory S.; Kaplun, Ludmila; Balan, Karina; Chong, Zhao-Zhong; Li, Faqi; Kaplun, Alexander; VanBerkum, Mark F. A.; Arking, Robert; Freeman, D. Carl; Maiese, Kenneth; Tzivion, Guri

    2008-01-01

    The life span of model organisms can be modulated by environmental conditions that influence cellular metabolism, oxidation, or DNA integrity. The yeast nicotinamidase gene pnc1 was identified as a key transcriptional target and mediator of calorie restriction and stress-induced life span extension. PNC1 is thought to exert its effect on yeast life span by modulating cellular nicotinamide and NAD levels, resulting in increased activity of Sir2 family class III histone ...

  4. High-Energy, Multi-Octave-Spanning Mid-IR Sources via Adiabatic Difference Frequency Generation

    Science.gov (United States)

    2016-10-17

    AFRL-AFOSR-VA-TR-2016-0354 High-Energy, Multi-Octave-Spanning Mid- IR Sources via Adiabatic Difference Frequency Generation Franz Kaertner...COVERED (From - To) 15 Mar 2013 to 14 Jul 2016 4. TITLE AND SUBTITLE High-Energy, Multi-Octave-Spanning Mid- IR Sources via Adiabatic Difference Frequency...ABSTRACT The creation of energetic, arbitrarily shapeable, multi-octave-spanning, coherent sources of short-wave, mid-wave, and long-wave mid- IR

  5. Estimation of stature from arm span of male Igbo students of Ebonyi ...

    African Journals Online (AJOL)

    The result showed that arm span correlated positively (r=0.95) with the individual height. Also, the arm span exceeded height in all the age groups, studied. In general, the mean arm span of the whole subjects is 174.3 ± 6.5(cm) while the mean standing height is 168.3±8.3 (cm) with the mean difference of 6.0±4.6 (cm).

  6. Microstructural characterization of intercritically annealed low alloy PM steels

    International Nuclear Information System (INIS)

    Gueral, A.; Tekeli, S.

    2007-01-01

    In this study, the applicability of intercritical annealing heat treatment, which is usually practiced to high strength low alloy ingot steels (HSLA), to low alloy powder metallurgy (PM) processed steels was investigated. With this heat treatment, it was intended to produce a dual-phase steel structure (ferrite + martensite) in PM steel. The effect of various amount of graphite addition on microstructure was also examined. For these purposes, atomized iron powder (Ancorsteel 1000) was mixed with 0.3 and 0.5 wt% graphite powder. The mixed powders were cold pressed at 700 MPa with single action and sintered at 1120 deg. C for 30 min under pure argon gas atmosphere. Some of the sintered specimens were directly annealed at intercritical heat treatment temperatures of 724, 735 and 760 deg. C and rapidly water quenched. Through these heat treatments, ferrite + martensite microstructure with coarse grain size were produced. The other sintered specimens were first austenitized at 890 deg. C for 12 min before intercritically annealing and then rapidly water quenched to produce fully martensitic structure. These specimens with fully martensitic microstructure were subsequently annealed at intercritical annealing temperatures of 724, 735 and 760 deg. C and rapidly water quenched. Ferrite + martensite microstructure with fine grain size was obtained by this route. The experimental results showed that martensite volume fraction increased with increasing intercritical annealing temperature as well as increasing graphite content. It is thought that mechanical properties of PM steels can be controlled by these heat treatments which are an alternative to traditional heat treatments of quenching + tempering applied usually to PM steels

  7. Effect of pattern complexity on the visual span for Chinese and alphabet characters.

    Science.gov (United States)

    Wang, Hui; He, Xuanzi; Legge, Gordon E

    2014-07-03

    The visual span for reading is the number of letters that can be recognized without moving the eyes and is hypothesized to impose a sensory limitation on reading speed. Factors affecting the size of the visual span have been studied using alphabet letters. There may be common constraints applying to recognition of other scripts. The aim of this study was to extend the concept of the visual span to Chinese characters and to examine the effect of the greater complexity of these characters. We measured visual spans for Chinese characters and alphabet letters in the central vision of bilingual subjects. Perimetric complexity was used as a metric to quantify the pattern complexity of binary character images. The visual span tests were conducted with four sets of stimuli differing in complexity--lowercase alphabet letters and three groups of Chinese characters. We found that the size of visual spans decreased with increasing complexity, ranging from 10.5 characters for alphabet letters to 4.5 characters for the most complex Chinese characters studied. A decomposition analysis revealed that crowding was the dominant factor limiting the size of the visual span, and the amount of crowding increased with complexity. Errors in the spatial arrangement of characters (mislocations) had a secondary effect. We conclude that pattern complexity has a major effect on the size of the visual span, mediated in large part by crowding. Measuring the visual span for Chinese characters is likely to have high relevance to understanding visual constraints on Chinese reading performance. © 2014 ARVO.

  8. Small lymphocytes in peripheral lymphoid tissues of nude mice. Life-span and distribution

    DEFF Research Database (Denmark)

    Hougen, H P; Röpke, C

    1975-01-01

    The distribution of small lymphocytes according to life-span in the peripheral lymphoid tissues of the mouse mutant "nude" has been studied by means of auto-radiography and scintillation counting to evaluate the localization of B lymphocytes with varying life-span. The vast majority of the lympho......The distribution of small lymphocytes according to life-span in the peripheral lymphoid tissues of the mouse mutant "nude" has been studied by means of auto-radiography and scintillation counting to evaluate the localization of B lymphocytes with varying life-span. The vast majority...

  9. Impact of sensory acuity on auditory working memory span in young and old adults

    OpenAIRE

    Baldwin, Carryl L.; Ash, Ivan K.

    2011-01-01

    The role of sensory acuity, processing speed, and working memory capacity on auditory working memory span (L-span) performance at five presentation levels was examined in 80 young (18–30 y) and 26 older adults (60–82 y). Lowering the presentation level of the L-span task had a greater detrimental effect on older adults than in the young. Furthermore, the relationship between sensory acuity and L-span performance varied as a function of age and presentation level. These results suggest that de...

  10. Pullout behavior of steel fibers from cement-based composites

    DEFF Research Database (Denmark)

    Shannag, M. Jamal; Brincker, Rune; Hansen, Will

    1997-01-01

    A comprehensive experimental program on pullout tests of steel fibers from cement based matrices is described. A specially designed single fiber pullout apparatus was used to provide a quantitative determination of interfacial properties that are relevant to toughening brittle materials through...... fiber reinforcement. The parameters investigated included a specially designed high strength cement based matrix called Densified Small Particles system (DSP), a conventional mortar matrix, fiber embeddment length, and the fiber volume fraction. The mediums from which the fiber was pulled included...

  11. Notch aspects of RSP steel microstructure

    Directory of Open Access Journals (Sweden)

    Michal Černý

    2012-01-01

    Full Text Available For a rather long time, basic research projects have been focused on examinations of mechanical properties for Rapid Solidification Powder (RSP steels. These state-of-art steels are commonly known as “powdered steels“. In fact, they combine distinctive attributes of conventional steel alloys with unusual resistance of construction material manufactured by so called “pseudo-powdered” metallurgy.Choice of suitable materials for experimental verification was carried out based on characteristic application of so called “modern steel”. First, groups of stainless and tool steel types (steel grades ČSN 17 and 19 were selected. These provided representative specimens for the actual comparison experiment. For stainless steel type, two steel types were chosen: hardenable X47Cr14 (ČSN 17 029 stainless steel and non-hardenable X2CrNiMo18-14-3 (ČSN 17 350 steel. They are suitable e.g. for surgical tools and replacements (respectively. For tooling materials, C80U (ČSN 19 152 carbon steel and American D2 highly-alloyed steel (ČSN “equivalent” being 19 572 steel were chosen for the project. Finally, the M390 Böhler steel was chosen as representative of powdered (atomized steels. The goal of this paper is to discuss structural aspects of modern stainless and tool steel types and to compare them against the steel made by the RSP method. Based on the paper's results, impact of powdered steel structural characteristics on the resistance to crack initiation shall be evaluated.

  12. Irradiation embrittlement of ferritic stainless steels

    International Nuclear Information System (INIS)

    Suganuma, K.; Kayano, H.

    1984-01-01

    The characteristics of the irradiation embrittlement of some ferritic stainless steels were examined by tensile tests. Steels selected in this investigation were classified into three groups: chi phase, precipitation hardened Fe-13Cr steels; tempered martensitic Fe-12Cr steels; and low alloy steels. The latter steels were chosen in order to compare the irradiation embrittlement characteristics with those of stainless steels. The stainless steels were superior to the low alloy steels with regard to the irradiation embrittlement (the changes in both ductile-brittle transition temperature (DBTT) and unstable plastic flow transition temperature (UPFTT)), irrespective of whether these stainless steels had chi phase precipitated structures or tempered martensitic structures. The suppression of the DBTT increase owing to irradiation results from low yield stress increase Δσsub(y) and high |[dσsub(y)(u)/dT]|, where u denotes unirradiated, in the stainless steels. The suppression of the UPFTT results from the high work hardening rate or the high work exponent and the low Lueders strain in the stainless steels. These characteristics of irradiation embrittlement in the ferritic stainless steels are thought to be caused by the defect structure, which is modified by Cr atoms. (author)

  13. Corrosion of steel in concrete

    International Nuclear Information System (INIS)

    Preece, C.M.

    1982-10-01

    A comparative study has been made of those properties of Massiv and Standard cements which are considered to determine their ability to protect steel reinforcement from corroding. Saturated Massiv cement has a higher evaporabel water content, but a significantly finer pore structure than has saturated Standard cement. This fine structure resulted in an electrical resistivity ten times higher and chloride diffusivity ten times lower than those of Standard cement. Electrochemical measurements have shown that the passive current density of steel in Massiv mortar is higher than that of steel in Standard mortar, but the higher current should lead to a more rapid decrease in potential to a level at which neither chloride attack of hydrogen evolution will occur. Whereas steel in Standard mortar was found to be highly susceptible to crevice corrosion, no such attack has been observed in Massiv mortar. Moreover, the initiation of chloride induced corrosion and the subsequent rates of corrosion were both lower in Massiv mortar than in Standard mortar. Thus, it may be predicted that Massiv cement would provide greater protection for steel reinforcement in underground structures exposed to chloride containing ground water than would Standard cement. (author)

  14. Estimation of Height from Arm Span in 6-11 Years Children in Odisha, India

    Directory of Open Access Journals (Sweden)

    Snigdha Prava Mishra

    2017-10-01

    Full Text Available Introduction: Standing height is an important anthropometric parameter to track longitudinal growth, to estimate body fatness and to calculate energy requirement. Measurement of height may be difficult in children who cannot stand. Aim: To establish regression equation for estimation of height from arm span in children. To check comparative relevancy of this equation with fixed height-to-arm span ratio (HAR for estimation of height. Materials and Methods: A cross-sectional study was conducted with 6-11 years school children (n=1465, Boys=774, Girls=691 in state of Odisha, India. Height was measured by portable stadiometer and arm span was measured by fiberglass measuring tape to nearest 0.1 cm. Pearson correlation and regression analysis was carried out between height and arm span data. p<0.05 (two tail was considered statistically significant. Results: Mean height and arm span in boys (124.16±8.74 cm and 125.57±10.43 cm respectively was significantly more (p<0.001 than height and arm span in girls (121.18±10.37 cm and 121.50±11.68 cm respectively. Mean HAR was 0.9942±0.0279. Correlation between height and arm span in boys was r = 0.94 (p<0.001 and in girls was r = 0.96 (p<0.001. Overall correlation coefficient was r = 0.95 (p<0.001. Regression equation for estimation of height from arm span was established: Height (cm = 0.8192 * arm span (cm + 21.46. Conclusion: Height in children of 6-11 years showed strong positive correlation with arm span. Regression equation established from this study can be used to estimate height from arm span. This estimation is more reliable than estimation of height from HAR.

  15. The Bendability of Ultra High strength Steels

    Science.gov (United States)

    Hazra, S. K.; Efthymiadis, P.; Alamoudi, A.; Kumar, R. L. V.; Shollock, B.; Dashwood, R.

    2016-08-01

    Automotive manufacturers have been reducing the weight of their vehicles to meet increasingly stringent environmental legislation that reflects public demand. A strategy is to use higher strength materials for parts with reduced cross-sections. However, such materials are less formable than traditional grades. The frequent result is increased processing and piece costs. 3D roll forming is a novel and flexible process: it is estimated that a quarter of the structure of a vehicle can be made with a single set of tooling. Unlike stamping, this process requires material with low work hardening rates. In this paper, we present results of ultra high strength steels that have low elongation in a tension but display high formability in bending through the suppression of the necking response.

  16. Laser based refurbishment of steel mill components

    CSIR Research Space (South Africa)

    Kazadi, P

    2006-03-01

    Full Text Available Si Cr Ni Mo Hardness (HV1kg) 316L* 0.026 1.33 0.51 16.23 12.36 2.28 160 Diamalloy 1008* 0.4 - 3 17 3 11 940 431 0.19 0.18 0.8 14.3 1.64 0.32 520 60S 0.54 0.13 4.67 16 75 0.04 880 Since the locating shoulders on the distance sleeves... parameters The typical chemical composition and hardness properties of the various alloys used cladded onto C-Mn steel flat bar substrate can be seen in table 3. Table 3: Chemical composition and hardness of cladding alloys (single layer) Material C Mn...

  17. Diferença entre span verbal e visual nos gêneros: estudo piloto Difference between verbal and visual span in genders: pilot study

    Directory of Open Access Journals (Sweden)

    Mariana Cristina Pedrassa Sagrilo

    2012-01-01

    Full Text Available OBJETIVO: avaliar a memória de trabalho analisando a capacidade de retenção de estímulos auditivos (span verbal e visuais (span visual e estabelecer a relação com o gênero (masculino e feminino. MÉTODO: participaram deste estudo 20 crianças entre seis anos e cinco meses e sete anos, sendo 10 sujeitos do sexo masculino e 10 sujeitos do sexo feminino. Todos os sujeitos foram submetidos às provas de avaliação do span verbal e visual em ordem direta e inversa. RESULTADOS: apenas na prova de palavras dissílabas com fonologia semelhante e semântica diferente do span verbal, houve variância significante entre os gêneros. As crianças do sexo feminino apresentaram melhor desempenho em relação ao outro gênero, bem como maior capacidade de retenção de palavras dissílabas com fonologia e semântica diferentes. No span visual (ordem direta e inversa as crianças do sexo masculino obtiveram melhor desempenho, apesar de não ter diferenças significantes. Em relação à idade não houve diferença de retenção de estímulos. CONCLUSÃO: as crianças do sexo feminino, neste estudo, apresentaram tendência à melhor desempenho do span verbal e as crianças do sexo masculino tendência a melhor desempenho no span visual. No entanto, o estudo é limitado devido ao reduzido número de participantes na amostra.PURPOSE: to evaluate the working memory analyzing the retention ability of auditory stimuli (verbal span and visual stimuli (visual span, and to establish its relation to gender (male and female. METHOD: 20 subjects - 10 female children and 10 male children - from six and five months to seven years old took part in this study. All subjects were submitted to evaluation tests for both verbal and visual spans in direct and inverse orders. RESULTS: there was a significant variance between genders only in the test involving disyllabic words with phonology similar to and semantics different from verbal span. Female children showed a better

  18. Proof of the identity between the depletion layer thickness and half the average span for an arbitrary polymer chain

    DEFF Research Database (Denmark)

    Wang, Yanwei; Peters, Günther H.J.; Hansen, Flemming Yssing

    2008-01-01

    point in the polymer chain (such as the center of mass, middle segment, and end segments) can be computed as a function of the confinement size solely based on a single sampling of the configuration space of a polymer chain in bulk. Through a simple analysis based on the CABS approach in the case......The confinement analysis from bulk structure (CABS) approach [Y. Wang , J. Chem. Phys. 128, 124904 (2008)] is extended to determine the depletion profiles of dilute polymer solutions confined to a slit or near an inert wall. We show that the entire spatial density distributions of any reference...... of a single wall, we prove rigorously that (i) the depletion layer thickness delta is the same no matter which reference point is used to describe the depletion profile and (ii) the value of delta equals half the average span (the mean projection onto a line) of the macromolecule in free solution. Both...

  19. Fatigue Crack Growth Properties of Rail Steels

    Science.gov (United States)

    1981-10-01

    Fatigue crack propagation properties of rail steels were determined experimentally. The investigation covered 66 rail steels. The effects of the following parameters were studied: stress ratio (ratio of minimum to maximum stress in a cycle), frequenc...

  20. Fatigue Crack Initiation Properties of Rail Steels

    Science.gov (United States)

    1982-01-01

    Fatigue crack initiation properties of rail-steels were determined experimentally. One new and four used rail steels were investigated. The effects of the following parameters were studied: stress ratio (ratio of minimum to maximum stress in a cycle)...

  1. Evaluation of stainless steel reinforcement construction project

    Science.gov (United States)

    2003-02-01

    Stainless steel reinforcement has greater corrosion resistance than that of the conventional reinforcement. In this project, bridge A6059, the first in Missouri utilizing stainless steel reinforcement in the deck, was constructed, along with bridge A...

  2. Effects of x-irradiation of young female beagles on life span and tumor incidence

    International Nuclear Information System (INIS)

    Rosenblatt, L.S.; Book, S.A.; Goldman, M.

    1986-01-01

    Causes of death and the occurrence of neoplasia in female beagle dogs were evaluated retrospectively for 57 unexposed and 296 exposed dogs given single or fractionated whole-body x-irradiation exposures of 100 or 300 R. Some dogs subsequently were bred, and all were observed for the duration of their lives. The pathology for these dogs was derived from clinical records, gross-necropsy reports, tissue slides, and Formalin-fixed tissues. The results of this study indicated dose-related shortening of life span was clearly evident; causes of death due to either neoplasia (50%) or nonneoplastic disease (50%), with few exceptions, were similar in control and irradiated dogs; the incidences of neoplasms were not significantly greater for irradiated dogs than for controls, but the latency period decreased as dose increased; protraction increased survival in dogs given 300 R but not 100 R, which is attributable solely to amelioration of incidence rates of nonmammary neoplasia; and the cumulative rates of death due to mammary tumors were the same in dogs exposed to 100 R and 300 R. 14 refs., 6 figs., 2 tabs

  3. Centroid Localization of Uncooperative Nodes in Wireless Networks Using a Relative Span Weighting Method

    Directory of Open Access Journals (Sweden)

    Christine Laurendeau

    2010-01-01

    Full Text Available Increasingly ubiquitous wireless technologies require novel localization techniques to pinpoint the position of an uncooperative node, whether the target is a malicious device engaging in a security exploit or a low-battery handset in the middle of a critical emergency. Such scenarios necessitate that a radio signal source be localized by other network nodes efficiently, using minimal information. We propose two new algorithms for estimating the position of an uncooperative transmitter, based on the received signal strength (RSS of a single target message at a set of receivers whose coordinates are known. As an extension to the concept of centroid localization, our mechanisms weigh each receiver's coordinates based on the message's relative RSS at that receiver, with respect to the span of RSS values over all receivers. The weights may decrease from the highest RSS receiver either linearly or exponentially. Our simulation results demonstrate that for all but the most sparsely populated wireless networks, our exponentially weighted mechanism localizes a target node within the regulations stipulated for emergency services location accuracy.

  4. Optimum design of steel structures

    CERN Document Server

    Farkas, József

    2013-01-01

    This book helps designers and manufacturers to select and develop the most suitable and competitive steel structures, which are safe, fit for production and economic. An optimum design system is used to find the best characteristics of structural models, which guarantee the fulfilment of design and fabrication requirements and minimize the cost function. Realistic numerical models are used as main components of industrial steel structures. Chapter 1 containts some experiences with the optimum design of steel structures Chapter 2 treats some newer mathematical optimization methods. Chapter 3 gives formulae for fabrication times and costs. Chapters 4 deals with beams and columns. Summarizes the Eurocode rules for design. Chapter 5 deals with the design of tubular trusses. Chapter 6 gives the design of frame structures and fire-resistant design rules for a frame. In Chapters 7 some minimum cost design problems of stiffened and cellular plates and shells are worked out for cases of different stiffenings and loads...

  5. Developments in HSLA steel products

    Science.gov (United States)

    Paules, John R.

    1991-01-01

    The technology of microalloyed steels is expanding beyond its original emphasis on low-carbon, severely control-rolled strip and plate products. A variety of economical, high-strength, tough, as-rolled or as-forged microalloyed products are replacing more expensive heat-treated steels. Recrystallization-controlled rolling is being utilized to produce very fine ferrite grain sizes and good toughness in strip, plate and bar products processed with relatively high rolling temperatures. High-strength microalloyed long products such as railroad joint bars, truck frame rails and flat bars for truck trailer construction are replacing heat-treated parts. Microalloyed, medium-carbon forging steels are used extensively for automobile engine and suspension components. Fully pearlitic high-carbon rods are being microalloyed to enhance the properties of wire and springs.

  6. Corrosion of carbon steel welds

    International Nuclear Information System (INIS)

    Daniel, B.

    1988-09-01

    This report assesses the factors which cause preferential attack to occur in carbon steel fusion welds. It was concluded that the main factors were: the inclusion content of the weld metal, the potential of the weld metal being less noble than that of the parent, and the presence of low-temperature transformation products in the heat-affected zone of the weld. These factors should be minimized or eliminated as appropriate so that the corrosion allowances determined for carbon steel waste drums is also adequate for the welds. An experimental/theoretical approach is recommended to evaluate the relative corrosion resistance of welds prepared from BS 4360 grade 43A steel to that of the parent material. (author)

  7. INVESTIGATION OF LAUNCHING PROCESS FOR STEEL REINFORCED CONCRETE FRAMEWORK OF LARGE BRIDGES

    Directory of Open Access Journals (Sweden)

    V. A. Grechukhin

    2017-01-01

    Full Text Available Bridges are considered as the most complicated, labour-consuming and expensive components in roadway network of the Republic of Belarus. So their construction and operation are to be carried out at high technological level. One of the modern industrial methods is a cyclic longitudinal launching of large frameworks which provide the possibility to reject usage of expensive auxiliary facilities and reduce a construction period. There are several variants of longitudinal launching according to shipping conditions and span length: without launching girder, with launching girder, with top strut-framed beam in the form of cable-stayed system, with strut-framed beam located under span. While using method for the cyclic longitudinal launching manufacturing process of span is concentrated on the shore. The main task of the investigations is to select economic, quick and technologically simple type of the cyclic longitudinal launching with minimum resource- and labour inputs. Span launching has been comparatively analyzed with temporary supports being specially constructed within the span and according to capital supports with the help of launching girder. Conclusions made on the basis of calculations for constructive elements of span according to bearing ability of element sections during launching and also during the process of reinforced concrete plate grouting and at the stage of operation have shown that span assembly with application of temporary supports does not reduce steel spread in comparison with the variant excluding them. Results of the conducted investigations have been approbated in cooperation with state enterprise “Belgiprodor” while designing a bridge across river Sozh.

  8. Boron Steel: An Alternative for Costlier Nickel and Molybdenum Alloyed Steel for Transmission Gears

    Directory of Open Access Journals (Sweden)

    A. Verma

    2010-06-01

    Full Text Available Case Carburized (CC low carbon steels containing Ni, Cr and Mo alloying elements are widely used for transmission gears in automobile, as it possesses desired mechanical properties. In order to cut cost and save scarce materials like Ni and Mo for strategic applications, steel alloyed with Boron has been developed, which gives properties comparable to Ni-Cr-Mo alloyed steel. In the process of steel development, care was taken to ensure precipitation of boron which results in precipitation hardening. The characterization of the developed boron steel had exhibited properties comparable to Ni-Cr-Mo alloyed steel and superior to conventional boron steel.

  9. Inclusion control in high-performance steels

    International Nuclear Information System (INIS)

    Holappa, L.E.K.; Helle, A.S.

    1995-01-01

    Progress of clean steel production, fundamentals of oxide and sulphide inclusions as well as inclusion morphology in normal and calcium treated steels are described. Effects of cleanliness and inclusion control on steel properties are discussed. In many damaging constructional and engineering applications the nonmetallic inclusions have a quite decisive role in steel performance. An example of combination of good mechanical properties and superior machinability by applying inclusion control is presented. (author)

  10. Fatigue strength tests of layered steel

    OpenAIRE

    Michal Černý; Pavel Mazal; Josef Filípek; Petr Dostál

    2013-01-01

    The work deals with original measurement of fatigue properties of formed layered steel material – damask steel. This is a material that exhibits a fine micro-structure as well as a regular composition of many material layers with complementary properties. The article experimentally verifies high-cycle fatigue properties of layered steel and evaluates them from the point of view of fatigue tests of conventional steel materials and a parallel application of a non-destructive – acoustic emission...

  11. Hybrid Stainless Steel Girder for Bridge Construction

    OpenAIRE

    Tetsuya Yabuki; Yasunori Arizumi; Tetsuhiro Shimozato; Samy Guezouli; Hiroaki Matsusita; Masayuki Tai

    2017-01-01

    The main object of this paper is to present the research results of the development of a hybrid stainless steel girder system for bridge construction undertaken at University of Ryukyu. In order to prevent the corrosion damage and reduce the fabrication costs, a hybrid stainless steel girder in bridge construction is developed, the stainless steel girder of which is stiffened and braced by structural carbon steel materials. It is verified analytically and experimentally that the ultimate stre...

  12. ESF GROUND SUPPORT - STRUCTURAL STEEL ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    T. Misiak

    1996-06-26

    The purpose and objective of this analysis are to expand the level of detail and confirm member sizes for steel sets included in the Ground Support Design Analysis, Reference 5.20. This analysis also provides bounding values and details and defines critical design attributes for alternative configurations of the steel set. One possible configuration for the steel set is presented. This analysis covers the steel set design for the Exploratory Studies Facility (ESF) entire Main Loop 25-foot diameter tunnel.

  13. Looking for an Explanation for the Low Sign Span. Is Order Involved?

    Science.gov (United States)

    Gozzi, Marta; Geraci, Carlo; Cecchetto, Carlo; Perugini, Marco; Papagno, Costanza

    2011-01-01

    Although signed and speech-based languages have a similar internal organization of verbal short-term memory, sign span is lower than word span. We investigated whether this is due to the fact that signs are not suited for serial recall, as proposed by Bavelier, Newport, Hall, Supalla, and Boutla (2008. Ordered short-term memory differs in signers…

  14. Implant-supported, long-span fixed partial denture for a scleroderma patient: a clinical report.

    Science.gov (United States)

    Haas, Steven E

    2002-02-01

    Scleroderma poses many difficulties and challenges for the treating dentist. Until now, dental implant treatment for patients with scleroderma was limited to either complete overdentures or short-span fixed partial dentures. This clinical report describes the use of modified techniques to fabricate a long-span fixed prosthesis delivered after serial extractions and implant placement.

  15. Auditory and Visual Memory Span: Cognitive Processing by TMR Individuals with Down Syndrome or Other Etiologies.

    Science.gov (United States)

    Varnhagen, Connie K.; And Others

    1987-01-01

    Auditory and visual memory span were examined with 13 Down Syndrome and 15 other trainable mentally retarded young adults. Although all subjects demonstrated relatively poor auditory memory span, Down Syndrome subjects were especially poor at long-term memory access for visual stimulus identification and short-term storage and processing of…

  16. Calibration Results and Anticipated Science Ops for the Parker Solar Probe's SWEAP/SPAN-Electron Analyzers

    Science.gov (United States)

    Whittlesey, P. L.; Larson, D. E.; Livi, R.; Abiad, R.; Parker, C.; Halekas, J. S.; Kasper, J. C.; Korreck, K. E.

    2017-12-01

    We present the SPAN-E calibration results and science operation plans this instrument on the Parker Solar Probe mission. SPAN-E is a pair of highly configurable ESA sensors, one on the RAM side of the spacecraft (SPAN-Ae) and one on anti-RAM (SPAN-B). Together, SPAN-E will jointly measure the full 3D thermal and suprathermal electron distribution function at cadences as fast as 4.58Hz. Joined with the SPAN-Ai and SPC instruments that are part of the Solar Wind Electrons, Alphas, and Protons (SWEAP) suite, SPAN-E will measure the solar coronal plasma across a range of energies and densities with a FOV over >90% of the sky, returning data over a 7 year long PSP mission lifetime. The SPAN-E instruments have passed environmental testing at the instrument level, and the final instrument calibrations are complete. This presentation details the final instrument calibration results as performed at UCB/SSL after environmental testing, and details the planned configurations for PSP's first orbit. In addition, the PSP spacecraft's magnetic fields are expected to distort the measured electron VDFs at low energies, thus we present a novel computer vision method of measuring and modeling the spacecraft magnetic fields as seen during an observatory-level "swing" test. Ultimately, the model will feed into an algorithm for ground corrections to electron VDFs distorted by these stray spacecraft magnetic fields.

  17. STUDY THE CHARACTERISTICS OF SMALL AND VERY SMALL SPAN WINGS, USED ON SHIPS

    Directory of Open Access Journals (Sweden)

    Beazit ALI

    2011-07-01

    Full Text Available This scientific work presents the way in which the small, and very small span wings can be obtainedstarting from the great span wings and using the two scales of the similarity theory. Basing on two scales modelit can transcribe from model at nature the coefficients x c , y c and lengthening λ of Gottingen - 612 profile.

  18. Processing Efficiency in Preschoolers' Memory Span: Individual Differences Related to Age and Anxiety

    Science.gov (United States)

    Visu-Petra, Laura; Miclea, Mircea; Cheie, Lavinia; Benga, Oana

    2009-01-01

    In self-paced auditory memory span tasks, the microanalysis of response timing measures represents a developmentally sensitive measure, providing insights into the development of distinct processing rates during recall performance. The current study first examined the effects of age and trait anxiety on span accuracy (effectiveness) and response…

  19. A pluggable service platform architecture for e-commercspan>e

    NARCIS (Netherlands)

    Aulkemeier, Fabian; Paramartha, Mohammad Anggasta; Iacob, Maria Eugenia; van Hillegersberg, Jos

    2016-01-01

    In the beginning of the e-commercspan>e era, retailers mostly adopted vertically integrated solutions to control the entire e-commercspan>e value chain. However, they began to realize that to achieve agility, a better approach would be to focus on certain core capabilities and then create a partner ecosystem

  20. E-commercspan>e in China and Germany: a Sino-German comparative analysis

    NARCIS (Netherlands)

    Purnhagen, K.

    2012-01-01

    The ways to approach the regulation of e-commercspan>e markets are in the focus of discussion both in China and Germany. While a general need for regulation is undisputed in both countries, the scope, means and aims regulation differ. The Chinese e-commercspan>e regulation is based on strong governmental

  1. Implications of e-commercspan>e for banking and finance

    NARCIS (Netherlands)

    Heng, Michael S.H.

    2001-01-01

    The aim of the paper is to show that e-commercspan>e holds the potential totransform banking and financial systems. There are three aspects in which e-commercecan affect banking and finance. First, banks and financial firms can use thetechnology and business practice of e-commercspan>e to market their

  2. Relations between Preschool Attention Span-Persistence and Age 25 Educational Outcomes

    Science.gov (United States)

    McClelland, Megan M.; Acock, Alan C.; Piccinin, Andrea; Rhea, Sally Ann; Stallings, Michael C.

    2013-01-01

    This study examined relations between children's attention span-persistence in preschool and later school achievement and college completion. Children were drawn from the Colorado Adoption Project using adopted and non-adopted children (N = 430). Results of structural equation modeling indicated that children's age 4 attention span-persistence…

  3. Influence of the Visual Attention Span on Child Reading Performance: A Cross-Sectional Study

    Science.gov (United States)

    Bosse, Marie-Line; Valdois, Sylviane

    2009-01-01

    The visual attention (VA) span deficit hypothesis was found successfully to account for variability in developmental dyslexia (Bosse, Tainturier & Valdois, 2007). We conducted a cross-sectional study on 417 typically developing children from first, third and fifth grades examining the role of VA span on the development of reading skills. A battery…

  4. Shear Capacity and Failure Behavior of Steel-Reinforced High Ductile Concrete Beams

    Directory of Open Access Journals (Sweden)

    Mingke Deng

    2015-01-01

    Full Text Available The shear behavior of six high ductile fiber reinforced concrete (HDC beams is studied to investigate the influence of shear-span ratio and HDC mechanical property on the improvement of the shear failure mode and shear capacity of short beams. Four steel-reinforced high ductile concrete beams (SHDC beams with different shear span ratios are tested under concentrated load at midspan. To study the effect of stirrups and steel on the shear capacity of short beams, two additional specimens without steel but one including stirrups are investigated. The main aspects of SHDC beams are discussed in detail, such as failure mode, deformability, and shear capacity. Test results show that the SHDC short beams keep high residual bearing capacity and great integrity when suffering from large deformation. It is revealed that HDC increased the shear ductility and improved the shear failure mode of short beams. A comparison with the shear equations of Chinese YB9082-2006 shows that the Chinese Code equation provides conservative estimation for HDC beams. This study proposes modifications to the equation for predicting the shear capacity of HDC beams.

  5. Toughness and Embrittlement of RPV Steels Using Ultrasonic Measurements

    International Nuclear Information System (INIS)

    Hiser, Allen L. Jr.

    2004-01-01

    This paper summarizes the findings from an effort addressing the use of ultrasonic attenuation as a suitable parameter for nondestructive determination of irradiation embrittlement in reactor pressure vessel (RPV) steels. The materials examined in this study include one heat of RPV steel that was heat treated to induce changes in its fracture toughness, several heats of RPV steel irradiated to assess neutron embrittlement changes in fracture toughness, and a matrix of RPV steels (in the unirradiated condition) with a range of as-fabricated fracture toughness levels. The following observations can be made. -) The results indicate that ultrasonic attenuation is generally able to identify differences in responses for samples with different toughness levels, although in some cases the differences in ultrasonic responses are small. -) Plate and weld materials provide different trends of attenuation changes with changes in material toughness. -) For the single forging studied in 2 irradiated conditions, the attenuation measurements provided mixed results. -) Differences in fracture toughness that arise from damage of a microstructure result in more different responses in ultrasonic attenuation than differences in fracture toughness that arise from as-fabricated differences in microstructure

  6. Recent developments in turning hardened steels - A review

    Science.gov (United States)

    Sivaraman, V.; Prakash, S.

    2017-05-01

    Hard materials ranging from HRC 45 - 68 such as hardened AISI H13, AISI 4340, AISI 52100, D2 STL, D3 STEEL Steel etc., need super hard tool materials to machine. Turning of these hard materials is termed as hard turning. Hard turning makes possible direct machining of the hard materials and also eliminates the lubricant requirement and thus favoring dry machining. Hard turning is a finish turning process and hence conventional grinding is not required. Development of the new advanced super hard tool materials such as ceramic inserts, Cubic Boron Nitride, Polycrystalline Cubic Boron Nitride etc. enabled the turning of these materials. PVD and CVD methods of coating have made easier the production of single and multi layered coated tool inserts. Coatings of TiN, TiAlN, TiC, Al2O3, AlCrN over cemented carbide inserts has lead to the machining of difficult to machine materials. Advancement in the process of hard machining paved way for better surface finish, long tool life, reduced tool wear, cutting force and cutting temperatures. Micro and Nano coated carbide inserts, nanocomposite coated PCBN inserts, micro and nano CBN coated carbide inserts and similar developments have made machining of hardened steels much easier and economical. In this paper, broad literature review on turning of hardened steels including optimizing process parameters, cooling requirements, different tool materials etc., are done.

  7. Plasticity induced by phase transformation in steel: experiment vs modeling

    International Nuclear Information System (INIS)

    Tahimi, Abdeladhim

    2011-01-01

    The objectives of this work are: (i) understand the mechanisms and phenomena involved in the plasticity of steels in the presence of a diffusive or martensitic phase transformation. (ii) develop tools for predicting TRIP, which are able to correctly reproduce the macroscopic deformation for cases of complex loading and could also provide information about local elasto-visco-plastic interactions between product and parent phases. To this purpose, new experimental tests are conducted on 35NCD16 steel for austenite to martensite transformation and on 100C6 steel for austenite to pearlite transformation. The elasto viscoplastic properties of austenite and pearlite of the 100C6 steel are characterized through tension compression and relaxation tests. The parameters of macro-homogeneous and crystal-based constitutive laws could then be identified such as to analyse different models with respect to the experimental TRIP: the analytical models of Leblond (1989) and Taleb and Sidoroff (2003) but also, above all, different numerical models which can be distinguished by the prevailing assumptions concerning the local kinetics and the constitutive laws. An extension of the single-grain model dedicated to martensitic transformations developed during the thesis of S. Meftah (2007) is proposed. It consists in introducing the polycrystalline character of the austenite through a process of homogenization based on a self-consistent scheme by calculating the properties of an Equivalent Homogeneous Medium environment (EHM). (author)

  8. Boron steel. I Part. Preparation

    International Nuclear Information System (INIS)

    Jaraiz Franco, E.; Esteban Hernandez, J. A.

    1960-01-01

    With the advent of the first nuclear reactors arise the need for control rods and shielding duties for some types of radiations. One of the materials used for this purpose has been the high boron steel. This paper describes the melting and casting procedures employed for the production, at laboratory scale, of steels with Boron content ranging from 1 to 4 per cent, as well as the metallographic and X-Ray techniques used for the identification of the present phases. The electrolytic technique employed for the isolation of the Fe 2 B phase and its subsequent X-Ray identification has proved to be satisfactory. (Author) 11 refs

  9. Metallography of maraging 350 steel

    Energy Technology Data Exchange (ETDEWEB)

    Hutson, S.M.; Merten, C.W.

    1987-01-01

    A technique for etching maraging 350 steel with Glyceregia is described. Surface activation procedures are integral to this technique. Microstructural features revealed by this technique are compared with those obtained with Kalling's reagent, Fry's reagent, and 5% Nital, three etchants commonly used to reveal microstructures of maraging steels. Features which may be simultaneously revealed using Glyceregia include prior austenite grain boundaries, martensitic structure, precipitates, titanium carbo-nitrides, and reverted austenite. The other etchants examined in this investigation typically reveal only a few of the microstructural features detailed above at any one time. 11 refs., 10 figs., 2 tabs.

  10. Nickel release from stainless steels.

    Science.gov (United States)

    Haudrechy, P; Mantout, B; Frappaz, A; Rousseau, D; Chabeau, G; Faure, M; Claudy, A

    1997-09-01

    In 1994, a study of nickel release and allergic contact dermatitis from nickel-plated metals and stainless steels was published in this journal. It was shown that low-sulfur stainless steel grades like AISI 304, 316L or 430 (S AISI 303-S approximately 0.3%) releases about 1.5 micrograms/cm2/week in this acid artificial sweat. Applied on patients sensitized to nickel, these metals elicit positive reactions in 96% and 14%, respectively, of the patients. The main conclusion was that low-sulfur stainless steels like AISI 304, 316L or 430, even when containing Ni, should not elicit nickel contact dermatitis, while metals having a mean corrosion resistance like a high-sulfur stainless steel (AISI 303) or nickel-plated steel should be avoided. The determining characteristic was in fact the corrosion resistance in chloride media, which, for stainless steels, is connected, among other factors, to the sulfur content. Thus, a question remained concerning the grades with an intermediate sulfur content, around 0.03%, which were not studied. They are the object of the study presented in this paper. 3 tests were performed: leaching experiments, dimethylglyoxime and HNO3 spot tests, and clinical patch tests; however, only stainless steels were tested: a low-sulfur AISI 304 and AISI 303 as references and 3 grades with a sulfur content around 0.03%: AISI 304L, AISI 304L added with Ca, AISI 304L+Cu. Leaching experiments showed that the 4 non-resulfurised grades released less than 0.5 microgram/cm2/week in acid sweat while the reulfurized AISI 303 released around or more than 0.5 microgram/cm2/week. This is explained by the poorer corrosion resistance of the resulfurized grade. Yet all these grades had the same reaction to the DMG test (negative result), which shows again its lack of sensitivity. In contrast, the HNO3 spot test distinguished AISI 303 from the non-resulfurized grades. Clinical patch tests again showed that some patients (4%) were intolerant to AISI 303, while none were

  11. Plating on stainless steel alloys

    International Nuclear Information System (INIS)

    Dini, J.W.; Johnson, H.R.

    1981-01-01

    Quantitative adhesion data are presented for a variety of electroplated stainless steel type alloys. Results show that excellent adhesion can be obtained by using a Wood's nickel strike or a sulfamate nickel strike prior to final plating. Specimens plated after Wood's nickel striking failed in the deposit rather than at the interface between the substrate and the coating. Flyer plate quantitative tests showed that use of anodic treatment in sulfuric acid prior to Wood's nickel striking even further improved adhesion. In contrast activation of stainless steels by immersion or cathodic treatment in hydrochloric acid resulted in very reduced bond strengths with failure always occurring at the interface between the coating and substrate

  12. Erosion behaviour of hydro turbine steels

    Indian Academy of Sciences (India)

    WINTEC

    encountered with martensitic steels. Fully martensitic steels are air hardening and susceptible to hydrogen em- brittlement. Austenitic stainless steel, on the other hand, has been widely preferred by industry due to its good mechanical properties, outstanding corrosion resistance in a wide range of environment and good ...

  13. Steeling and Resilience in Art Education

    Science.gov (United States)

    Heise, Donalyn

    2014-01-01

    Steel is an incredibly strong alloy of iron and carbon. Due to its incredible strength and durability, this resilient material is commonly used for constructing buildings. The transitive verb "steeling" is defined in Miriam-Webster dictionary as "to fill with resolution or determination, as in, she 'steeled herself to face the…

  14. Erosion behaviour of hydro turbine steels

    Indian Academy of Sciences (India)

    The martensitic stainless steel (termed as 13/4) is currently being used for fabrication of underwater parts in hydroelectric projects. There are, however, several maintenance problems associated with the use of this steel. A nitronic steel (termed as 21–4–N) has been developed as an alternative with the specific aim of ...

  15. Basic mechanical properties of layered steels

    Directory of Open Access Journals (Sweden)

    Michal Černý

    2013-01-01

    Full Text Available This article deals with identifying attributes of layered steel materials (damask steel with the help of mechanical tests. Experimentally verify basic mechanical properties of layered steel and subsequently assessed it in comparison with the values obtained for the classic steel materials. In conclusion, there are listed the possibilities of using multilayer steel materials in technical practice, depending on the economics of production.The damask steel was prepared by forge welding from a packet consisting of 17 layers (9 layers of tool steel 19 133 (ČSN with the thickness of 6 mm and 8 layers 80NiCr11 steel in the form of saw bands with the thickness of 1.2 mm. The packet was cut into 8 parts, folded 3 times and forged together, which provided damask steel with 136 layers. The resulting steel bars were used to make semi-finished products with the approximate dimensions of the test specimens. For evaluation of mechanical properties were applied the following tests: tensile test, Charpy impact test, hardness and microhardness measurementsThe results of tests proved that the properties of damask steel are dependent not only on the direction led impact quality forge weld layers and content iof nhomogeneities in the place of discord, but also on the quenching and tempering temperature, resp. on the choice of quenching bath, which determine the final structure of steel and the resulting hardness, respectively microhardness.

  16. Steel erected at A-3 Test Stand

    Science.gov (United States)

    2008-01-01

    Fabricated steel began arriving by truck Oct. 24 for construction of the A-3 Test Stand that will be used to test the engine for the nation's next generation of moon rockets. Within days workers from Lafayette Steel Erector Inc. began assembling the 16 steel stages needed on the foundation and footings poured in the previous year.

  17. Prevention of corrosion in prestressing steels

    NARCIS (Netherlands)

    Polder, R.B.

    1996-01-01

    Corrosion of prestressing steel may lead to sudden, so called brittle failure, due to the special microstructure of the steel and the high tensile forces. Such brittle failure may seriously reduce the load capacity of a prestressed concrete structure. In principle all stressed high strength steel is

  18. Application of modern timber structure in short and medium span bridges in China

    Directory of Open Access Journals (Sweden)

    Meizhen Fu

    2014-02-01

    Full Text Available A series of problems about Chinese bridges with short and medium span recent years were analyzed in this paper. The necessity and feasibility of modern timber structure applied in short and medium span bridges in China were also put forward. The results showed that the short and medium span bridges had many problems, such as monotonous structural forms, serious environmental pollution, multiple bridge defects and difficulty in maintenance. With the development of connection and maintenance technology of modern timber structure and its advantages of light self-weight, environmental coordination, high carrying capacity, excellent durability and abundant structural forms, it was necessary and feasible to apply modern timber structure in short and medium span bridges in China. More emphasis on the construction of modern timber structure should be conducted to expand its application scopes and improve the construction proportion of short and medium span timber bridges.

  19. Digit Span as a measure of everyday attention: a study of ecological validity.

    Science.gov (United States)

    Groth-Marnat, Gary; Baker, Sonya

    2003-12-01

    This study investigated the effectiveness of the WAIS-III Digit Span subtest to predict the everyday attention of 75 participants with heterogeneous neurological conditions who were administered the Digit Span subtest as well as the ecologically valid Test of Everyday Attention. In addition, the more visually oriented Picture Completion subtest along with the verbally loaded National Adult Reading Test were administered. Analysis indicated that, although Digit Span was a weak but statistically significant predictor of attentional ability (accounting for 12.7% of the unique variance). Picture Completion was a somewhat stronger predictor (accounting for 19% of the unique variance). The weak association of Digit Span and the Test of Everyday Attention, along with the finding that Picture Completion was a better predictor of performance on the Test of Everyday Attention, question the clinical utility of using Digit Span as a measure of everyday attention.

  20. Teaching Steel Connections Using an Interactive Virtual Steel Sculpture

    Science.gov (United States)

    Moaveni, Saeed; Chou, Karen C.

    2015-01-01

    Steel connections play important roles in the integrity of a structure, and many structural failures are attributed to connection failures. Connections are the glue that holds a structure together. The failures of the Hartford Coliseum in 1977, the Hyatt Regency Hotel in Kansas City in 1980, and the I-35W Bridge in Minneapolis in 2007 are all…

  1. Physical characterization of steel and stainless steel metal powders

    International Nuclear Information System (INIS)

    Lavilla, A.O.; Lucchesi, C.G.; Sandin, O.O.

    1991-01-01

    A methodology has been developed for the physical characterization of steel powders (obtained by atomization) for later sintering and for the construction of porous sheets and filtrating tubes, capable of operating at temperatures between 600 deg C and 800 deg C in corrosive atmospheres. This methodology was based on the equipment and methods used for the physical characterization of uranium oxide powders. (Author) [es

  2. Compresibility and sinterability of HCx PM steel diluted with stainless steels

    OpenAIRE

    Gordo, Elena; Khattab, Nermein Hamid; Ruiz-Navas, Elisa María

    2003-01-01

    HCx powder metallurgy steel contains in its composition high contents of Cr and C, and significant quantities of alloy elements typical of tool steels (Mo, V, W), to provide the corrosion resistance of stainless steel with wear resistance of tool steels. HCx appears to be a suitable material for applications in aggressive environments, as valve seat inserts in automotive engines. However, this steel presents a low compressibility leading to high production costs. In this work, some results ca...

  3. Some comments about the situation of the Steel Industry in the Arab Countries (Arab Steel Summit)

    International Nuclear Information System (INIS)

    Haidar, Y.; Astier, J.

    2009-01-01

    The Arab Steel Summit, that convened in Abu Dhabi in April, gave us another opportunity to review the situation of the Arab Iron and Steel Industry, with regard to the present World economic context. We will address: - the World situation of steel production, focusing on the Arab Countries; - the related situation of steel consumption; - the steel trade, including imports, exports and prices; - the consequences for technology and economy. (authors)

  4. Combined effect of steel fibres and steel rebars on impact resistance of high performance concrete

    OpenAIRE

    Ding, Yining; Chen, Xiang-yu; Azevedo, Cecília Maria

    2011-01-01

    The investigation on the impact properties of normal concrete (NC)and reinforced concrete (RC) specimens, steel fibre reinforced concrete (SFRC) specimens and RC+SFRC specimens with different steel fibres dosages were carried out with the drop-weight impact test recommended by ACI Committee 544. The results indicate that the number of blows to final failure greatly increased by addition of steel fibres. Moreover, the combination of steel fibres and steel rebars demonstrates a significant posi...

  5. M-AMST: an automatic 3D neuron tracing method based on mean shift and adapted minimum spanning tree.

    Science.gov (United States)

    Wan, Zhijiang; He, Yishan; Hao, Ming; Yang, Jian; Zhong, Ning

    2017-03-29

    Understanding the working mechanism of the brain is one of the grandest challenges for modern science. Toward this end, the BigNeuron project was launched to gather a worldwide community to establish a big data resource and a set of the state-of-the-art of single neuron reconstruction algorithms. Many groups contributed their own algorithms for the project, including our mean shift and minimum spanning tree (M-MST). Although M-MST is intuitive and easy to implement, the MST just considers spatial information of single neuron and ignores the shape information, which might lead to less precise connections between some neuron segments. In this paper, we propose an improved algorithm, namely M-AMST, in which a rotating sphere model based on coordinate transformation is used to improve the weight calculation method in M-MST. Two experiments are designed to illustrate the effect of adapted minimum spanning tree algorithm and the adoptability of M-AMST in reconstructing variety of neuron image datasets respectively. In the experiment 1, taking the reconstruction of APP2 as reference, we produce the four difference scores (entire structure average (ESA), different structure average (DSA), percentage of different structure (PDS) and max distance of neurons' nodes (MDNN)) by comparing the neuron reconstruction of the APP2 and the other 5 competing algorithm. The result shows that M-AMST gets lower difference scores than M-MST in ESA, PDS and MDNN. Meanwhile, M-AMST is better than N-MST in ESA and MDNN. It indicates that utilizing the adapted minimum spanning tree algorithm which took the shape information of neuron into account can achieve better neuron reconstructions. In the experiment 2, 7 neuron image datasets are reconstructed and the four difference scores are calculated by comparing the gold standard reconstruction and the reconstructions produced by 6 competing algorithms. Comparing the four difference scores of M-AMST and the other 5 algorithm, we can conclude that

  6. The parameters controlling the strength of soil-steel structures

    International Nuclear Information System (INIS)

    Barkhordari, M. A.; Abdel-Sayed, G.

    2001-01-01

    The present paper examines the ultimate load carrying capacity of soil-steel structures taking into consideration the sequence of the developments of plastic hinges, their location, and their sustained plastic moment. Non-linear analysis has been conducted using a micro-computer program in which a structural model is applied with the soil replaced by normal and tangential springs acting at the nodal points of a polygon representing the conduit wall. A comparative study has been conducted for the parameters which affect the load carrying capacity of soil-steel structure, leading to the following conclusions: (1) the load carrying capacity of the composite structure is significantly affected by the shear stiffness (or friction) of the surrounding soil; (2) the conduit span may be used when calculating the buckling load rather than the local radius of the conduit wall; (3) circular arches with sector angle of less than 180 d eg have higher load carrying capacity than equivalent re-entrant arches, i.e. arches with sector angle of more than 180 d eg; (4) the buckling load of the conduit is slightly affected by the rigidity of the lower zone of the conduit wall; (5) eccentric application of the load has practically little effect on its load carrying capacity

  7. Steel-board composite floors

    NARCIS (Netherlands)

    Couchman, G.H.; Tomà, A.W.; Brekelmans, J.W.P.M.; Brande, E.L.M.G. van den

    1999-01-01

    Work currently underway in Holland aDd the UK aims to increase the already considerable potential for light steel framing in buildings by developing rules for so-called "dry composites". This paper discusses both theoretical and experimental work to develop validated design mies for floor systems

  8. Precision machining of steel decahedrons

    Science.gov (United States)

    Abernathy, W. J.; Sealy, J. R.

    1972-01-01

    Production of highly accurate decahedron prisms from hardened stainless steel is discussed. Prism is used to check angular alignment of mounting pads of strapdown inertial guidance system. Accuracies obtainable using recommended process and details of operation are described. Photographic illustration of production device is included.

  9. Argon solubility in liquid steel

    NARCIS (Netherlands)

    Boom, R; Dankert, O; Van Veen, A; Kamperman, AA

    2000-01-01

    Experiments have been performed to establish the solubility of argon in liquid interstitial-free steel. The solubility appears to be lower than 0.1 at ppb, The results are in line with argon solubilities reported in the literature on liquid iron. Semiempirical theories and calculations based on the

  10. Weld bonding of stainless steel

    DEFF Research Database (Denmark)

    Santos, I. O.; Zhang, Wenqi; Goncalves, V.M.

    2004-01-01

    This paper presents a comprehensive theoretical and experimental investigation of the weld bonding process with the purpose of evaluating its relative performance in case of joining stainless steel parts, against alternative solutions based on structural adhesives or conventional spot-welding. Th...

  11. Kinetics of borided gear steels

    Indian Academy of Sciences (India)

    element content. Consequently, diffusion rate of boron atoms perpendicular to surface of GS18 is higher than that of GS32. The lower activation energy is obtained in the longer layer thickness. (Uslu et al 2007). Activation energy values obtained in this study vary in accordance with the chemical compo- sition of steels.

  12. Metadynamic recrystallization in C steels

    Indian Academy of Sciences (India)

    Metadynamic recrystallization has been investigated in three plain carbon steels (ENIA, EN2 and EN24) through the use of hot interrupted compression tests on a wedge plastometer. Holding time was 0.5 s between passes. Strain rates of 0.05 and 0.12/s and small strain increments of 3, 5 and 7% were employed.

  13. Kinetics of borided gear steels

    Indian Academy of Sciences (India)

    1745 to 2034 HV0,05 respectively, whereas Vickers hardness values of the untreated steels GS18 ..... The thickness values of boride layers with respect to boriding time and temperatures. determine the .... Campos I, Ramirez G, Figueroa U, Martinez J and Morales O 2007 Evaluation of boron mobility on the phases FeB ...

  14. Fatigue Strength of Weathering Steel

    Czech Academy of Sciences Publication Activity Database

    Kunz, Ludvík; Lukáš, Petr; Klusák, Jan

    2012-01-01

    Roč. 18, č. 1 (2012), s. 18-22 ISSN 1392-1320 Grant - others:GA MPO(CZ) FT/TA5/076 Institutional support: RVO:68081723 Keywords : fatigue of weathering steel * corrosion pits * fatigue notch factor Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 0.522, year: 2012

  15. Accidental actions in steel structures

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.; Gresnigt, A.M.

    2006-01-01

    Part 1-7 of EN 1991 covers accidental actions and gives rules and values for impact loads due to road, train and ship traffic and loads due to internal explosions. In this paper, the application of Part 1-7 of EN 1991 for steel structures is explained. Background information and design strategies

  16. Determination of the mechanical behavior of nitrogen alloyed steel (P900) at strain rates 10-3 s-1*106 s-1

    International Nuclear Information System (INIS)

    Nahme, Hartwig; Lach, Erhard

    2000-01-01

    The mechanical behavior of the nitrogen alloyed armor steel P900 has been investigated by means of various tests methods spanning the strain rate regime from quasi-static to high dynamic loading. The dynamic tests include Split-Hopkinson-Bar-Tests and Planar-Plate-Impact Tests in combination with a VISAR. Many steel types show a phase transition when loaded to pressure stresses exceeding 13GPa. Contrary to the behavior of these steels this phase transition is suppressed in P900 due to the presence of Nitrogen. In addition to the determination of the quasi-static, dynamic and shock properties of the P900 steel the results of SEM examination of softly recovered shock loaded samples will be presented, yielding insight in the failure mechanisms at high rates of strain

  17. Determination of the mechanical behavior of nitrogen alloyed steel (P900) at strain rates 10-3 s-1

    Science.gov (United States)

    Nahme, Hartwig; Lach, Erhard

    2000-04-01

    The mechanical behavior of the nitrogen alloyed armor steel P900 has been investigated by means of various tests methods spanning the strain rate regime from quasi-static to high dynamic loading. The dynamic tests include Split-Hopkinson-Bar-Tests and Planar-Plate-Impact Tests in combination with a VISAR. Many steel types show a phase transition when loaded to pressure stresses exceeding 13GPa. Contrary to the behavior of these steels this phase transition is suppressed in P900 due to the presence of Nitrogen. In addition to the determination of the quasi-static, dynamic and shock properties of the P900 steel the results of SEM examination of softly recovered shock loaded samples will be presented, yielding insight in the failure mechanisms at high rates of strain.

  18. Determination of the Mechanical Behavior of Nitrogen Alloyed Steel (P900) at Strain Rates 10-3 s-1 -106 s-1

    Science.gov (United States)

    Nahme, Hartwig; Lach, Erhard

    1999-06-01

    The mechanical behavior of the nitrogen alloyed armor steel P900 has been investigated by means of various tests methods spanning the strain rate regime from quasi-static to high dynamic loading. The dynamic tests include Split-Hopkinson-Bar-Tests, Taylor-Tests and Planar-Plate-Impact Tests in combination with a VISAR. Many steel types show a phase transition when loaded to pressure stresses exceeding 13GPa. Contrary to the behavior of these steels this phase-transition is suppressed in P900 due to the presence of Nitrogen. In addition to the determination of the quasi-static, dynamic and shock properties of the P900 steel the results of SEM examination of softly recovered shock loaded samples will be presented, yielding insight in the failure mechanisms at high rates of strain.

  19. Reduced-activation steels: Future development for improved creep strength

    International Nuclear Information System (INIS)

    Klueh, R.L.

    2008-01-01

    Reduced-activation steels for fusion applications were developed in the 1980s to replace the elevated-temperature commercial steels first considered. The new steels were patterned after the commercial steels, with the objective that the new steels have yield stress and ultimate tensile strength and impact toughness in a Charpy test comparable to or better than the steels they replaced. That objective was achieved in reduced-activation steels developed in Japan, Europe, and the United States. Although tensile and impact toughness of the reduced-activation steels exceed those of the commercial steels they were patterned after, their creep-rupture properties are inferior to some commercial steels they replaced. They are even more inferior to commercial steels developed since the 1980s. In this paper, compositional differences between reduced-activation steels and new commercial steels are examined, and compositions are proposed for development of new-and-improved reduced-activation steels

  20. Study on cementitious properties of steel slag

    Directory of Open Access Journals (Sweden)

    Zhu G.

    2013-01-01

    Full Text Available The converter steel slag chemical and mineral components in China’s main steel plants have been analysed in the present paper. The electronic microscope, energy spectrum analysis, X-ray diffraction analysis confirmed the main mineral compositions in the converter slag. Converter slag of different components were grounded to obtain a powder with specific surface area over 400m2/kg, making them to take place some part of the cement in the concrete as the admixture and carry out the standard tests. The results indicate that the converter slag can be used as cementitious materials for construction. Furthermore, physical mechanic and durability tests on the concrete that certain amount of cement be substituted by converter steel slag powder from different steel plants are carried out, the results show that the concrete with partial substitution of steel slag powder has the advantages of higher later period strength, better frost resistance, good wear resistance and lower hydration heat, etc. This study can be used as the technical basis for “Steel Slag Powder Used For Cement And Concrete”, “Steel Slag Portland Cement”, “Low Heat Portland Steel Slag Cement”, “Steel Slag Road Cement” in China, as well as a driving force to the works of steel slag utilization with high-value addition, circular economy, energy conservation and discharge reduction in the iron and steel industry.

  1. Creep of A508/533 Pressure Vessel Steel

    Energy Technology Data Exchange (ETDEWEB)

    Richard Wright

    2014-08-01

    ABSTRACT Evaluation of potential Reactor Pressure Vessel (RPV) steels has been carried out as part of the pre-conceptual Very High Temperature Reactor (VHTR) design studies. These design studies have generally focused on American Society of Mechanical Engineers (ASME) Code status of the steels, temperature limits, and allowable stresses. Initially, three candidate materials were identified by this process: conventional light water reactor (LWR) RPV steels A508 and A533, 2¼Cr-1Mo in the annealed condition, and Grade 91 steel. The low strength of 2¼Cr-1Mo at elevated temperature has eliminated this steel from serious consideration as the VHTR RPV candidate material. Discussions with the very few vendors that can potentially produce large forgings for nuclear pressure vessels indicate a strong preference for conventional LWR steels. This preference is based in part on extensive experience with forging these steels for nuclear components. It is also based on the inability to cast large ingots of the Grade 91 steel due to segregation during ingot solidification, thus restricting the possible mass of forging components and increasing the amount of welding required for completion of the RPV. Grade 91 steel is also prone to weld cracking and must be post-weld heat treated to ensure adequate high-temperature strength. There are also questions about the ability to produce, and very importantly, verify the through thickness properties of thick sections of Grade 91 material. The availability of large components, ease of fabrication, and nuclear service experience with the A508 and A533 steels strongly favor their use in the RPV for the VHTR. Lowering the gas outlet temperature for the VHTR to 750°C from 950 to 1000°C, proposed in early concept studies, further strengthens the justification for this material selection. This steel is allowed in the ASME Boiler and Pressure Vessel Code for nuclear service up to 371°C (700°F); certain excursions above that temperature are

  2. Digit span in dyslexia: variations according to language comprehension and mathematics skills.

    Science.gov (United States)

    Helland, Turid; Asbjørnsen, Arve

    2004-02-01

    The aim of this study was to investigate digit span performance in dyslexia. It was hypothesised that differences would be found in accordance with subgrouping by language comprehension and mathematic skills, and by analyses of how the digit span scores were attained. Two digit span tasks were given to a group of dyslexic children and controls (n = 57), mean age 12.62 (SD = 1.43). The tasks were "Digit Span" of the WISC-R, and "Digit Span 2," where the use of back-up strategies like finger counting and lip reading were restricted. As expected, the digit span scores were significantly lower in the dyslexia group than in the control group. Restrictions of back-up strategies did not alter the scores in the control group, while the scores were lowered in the dyslexia group. Further analyses of longest digit span, serial recall, and serial position indicated different retrieval patterns in the subgroups. The subgroup with good language comprehension and mathematic skills (n = 12), showed impaired serial recall especially in backward recall. The subgroup with good language comprehension skills, but with mathematics impairment (n = 9), showed impaired serial recall in both forward and backward recall. The subgroup with language impairments (n = 16), recalled fewer digits than the two other subgroups. The findings were discussed in relation to the "Phonological loop" of the Multi Component Model of Working Memory, and implications for intervention were discussed.

  3. Forward and backward digit span difficulties in children with specific learning disorder.

    Science.gov (United States)

    Giofrè, David; Stoppa, Ernesto; Ferioli, Paolo; Pezzuti, Lina; Cornoldi, Cesare

    2016-01-01

    This study examined performance in the forward and backward digit span task of the Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV) in a large group of children with specific learning disorder (SLD) as compared with a group of typically developing children matched for age and sex. Our results further support the hypothesis that the intellectual difficulties of children with SLD involve working memory in the forward digit span task to a greater extent than in the backward digit span task. The correlation of the two spans with a General Ability Index (GAI) was similar in SLD, and smaller in magnitude than in typically developing children. Despite a GAI within normal range, children with SLD had difficulty with both digit span tasks, but more so for forward span. This pattern was similar for different SLD profiles with clinical diagnoses of dyslexia and mixed disorder, but the impairments were more severe in the latter. Age differences were also investigated, demonstrating larger span impairment in older children with SLD than in younger.

  4. The Influence of Dietary Fat Source on Life Span in Calorie Restricted Mice.

    Science.gov (United States)

    López-Domínguez, José A; Ramsey, Jon J; Tran, Dianna; Imai, Denise M; Koehne, Amanda; Laing, Steven T; Griffey, Stephen M; Kim, Kyoungmi; Taylor, Sandra L; Hagopian, Kevork; Villalba, José M; López-Lluch, Guillermo; Navas, Plácido; McDonald, Roger B

    2015-10-01

    Calorie restriction (CR) without malnutrition extends life span in several animal models. It has been proposed that a decrease in the amount of polyunsaturated fatty acids (PUFAs), and especially n-3 fatty acids, in membrane phospholipids may contribute to life span extension with CR. Phospholipid PUFAs are sensitive to dietary fatty acid composition, and thus, the purpose of this study was to determine the influence of dietary lipids on life span in CR mice. C57BL/6J mice were assigned to four groups (a 5% CR control group and three 40% CR groups) and fed diets with soybean oil (high in n-6 PUFAs), fish oil (high in n-3 PUFAs), or lard (high in saturated and monounsaturated fatty acids) as the primary lipid source. Life span was increased (p Life span was also increased (p life span in mice on CR, and suggest that a diet containing a low proportion of PUFAs and high proportion of monounsaturated and saturated fats may maximize life span in animals maintained on CR. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  5. Irradiation embrittlement of pressure vessel steels

    International Nuclear Information System (INIS)

    Brumovsky, M.; Vacek, M.

    1975-01-01

    A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

  6. When the eyes no longer lead: Familiarity and length effects on Eye-Voice Span

    Directory of Open Access Journals (Sweden)

    Susana Silva

    2016-11-01

    Full Text Available During oral reading, the eyes tend to be ahead of the voice (eye-voice span. It has been hypothesized that the extent to which this happens depends on the automaticity of reading processes, namely on the speed of print-to-sound conversion. We tested whether EVS is affected by another automaticity component - immunity from interference. To that end, we manipulated word familiarity (high-frequency, low-frequency and pseudowords and word length as proxies of immunity from interference, and we used linear mixed effects models to measure the effects of both variables on the time interval at which readers do parallel processing by gazing at word N+1 while not having articulated word N yet (offset eye-voice span. Parallel processing was enhanced by automaticity, as shown by familiarity x length interactions on offset eye-voice span, and it was impeded by lack of automaticity, as shown by the transformation of offset eye-voice span into voice-eye span (voice ahead of the offset of the eyes in pseudowords. The relation between parallel processing and automaticity was strengthened by the fact that offset eye-voice span predicted reading velocity. Our findings contribute to understand how the offset eye-voice span, an index that is obtained in oral reading, may tap into different components of automaticity that underlie reading ability, oral or silent. In addition, we compared the duration of the offset eye-voice span with the average reference duration of stages in word production, and we saw that the offset eye-voice span may accommodate for more than the articulatory programming stage of word N.

  7. Steel slag carbonation in a flow-through reactor system: the role of fluid-flux.

    Science.gov (United States)

    Berryman, Eleanor J; Williams-Jones, Anthony E; Migdisov, Artashes A

    2015-01-01

    Steel production is currently the largest industrial source of atmospheric CO2. As annual steel production continues to grow, the need for effective methods of reducing its carbon footprint increases correspondingly. The carbonation of the calcium-bearing phases in steel slag generated during basic oxygen furnace (BOF) steel production, in particular its major constituent, larnite {Ca2SiO4}, which is a structural analogue of olivine {(MgFe)2SiO4}, the main mineral subjected to natural carbonation in peridotites, offers the potential to offset some of these emissions. However, the controls on the nature and efficiency of steel slag carbonation are yet to be completely understood. Experiments were conducted exposing steel slag grains to a CO2-H2O mixture in both batch and flow-through reactors to investigate the impact of temperature, fluid flux, and reaction gradient on the dissolution and carbonation of steel slag. The results of these experiments show that dissolution and carbonation of BOF steel slag are more efficient in a flow-through reactor than in the batch reactors used in most previous studies. Moreover, they show that fluid flux needs to be optimized in addition to grain size, pressure, and temperature, in order to maximize the efficiency of carbonation. Based on these results, a two-stage reactor consisting of a high and a low fluid-flux chamber is proposed for CO2 sequestration by steel slag carbonation, allowing dissolution of the slag and precipitation of calcium carbonate to occur within a single flow-through system. Copyright © 2014. Published by Elsevier B.V.

  8. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988. Fiscal year 1993 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988 (Act), commonly referred to as the Metals Initiative, was signed into law on November 17, 1988 (Public Law 100-680). The Act, 15 U.S.C. 5101 et seq., has tile following purposes: (1) to {open_quotes}increase the energy efficiency and enhance the competitiveness of American steel, aluminum, and copper industries{close_quotes}; and (2) to continue the research and development efforts begun under the Department of Energy (DOE) program known as the Steel Initiative. Section 8 of tile Act requires the Secretary of Energy to prepare an annual report to Congress describing the activities carried out under the Act during each fiscal year. 15 U.S.C. 5107 In addition, with respect to reports on fiscal years 1993, 1995, and 1997, Section 8 requires a complete summary of activities under the management plan and research plan from inception with an analysis of extent of their success in accomplishing the purposes of the Act. Id. The Metals Initiative is currently supporting six steel industry research and development projects: (1) Superplastic Steel Processing with Lawrence Livermore National Laboratory; (2) Direct Steelmaking with the American Iron and Steel Institute; (3) Electrochemical Dezincing of Steel Scrap with Argonne National Laboratory and Metal Recovery Industries (U.S.), Inc.; (4) Rapid Analysis of Molten Metals Using Laser Produced Plasmas with Lehigh University; (5) Direct Strip Casting using a single wheel caster with Armco, Inc.; and (6) Advanced Process Control, also with the American Iron and Steel Institute. At the close of the fiscal year, a seventh project, Waste Oxide Recycling with the American Iron and Steel Institute, was selected for inclusion in the Direct Steelmaking project. There are three projects with the aluminum industry. The first, Wettable Cathodes for Alumina Reduction Cells with the Reynolds Metals Company, continues from the prior periods.

  9. Localized corrosion and stress-corrosion cracking behavior of stainless steel weldments. Annual progress report, June 1, 1980-February 28, 1981

    International Nuclear Information System (INIS)

    Savage, W.F.; Duquette, D.J.

    1980-02-01

    Pitting corrosion experiments were conducted on 308L stainless steel as a function of alloy microstructure (% delta ferrite) in acidified water-methanol solutions. Slow strain rate stress corrosion cracking studies were performed on single-phase and duplex 304 stainless steels as functions of solution chemistry, temperature, and sensitization

  10. Ultrafast and octave-spanning optical nonlinearities from strongly phase-mismatched cascaded interactions

    DEFF Research Database (Denmark)

    Zhou, B. B.; Chong, A.; Wise, F. W.

    2012-01-01

    response with an octave-spanning bandwidth. We verify this experimentally by showing few-cycle soliton compression with noncritical cascaded second-harmonic generation: Energetic 47 fs infrared pulses are compressed in a just 1-mm long bulk lithium niobate crystal to 17 fs (under 4 optical cycles) with 80......% efficiency, and upon further propagation an octave-spanning supercontinuum is observed. Such ultrafast cascading is expected to occur for a broad range of pump wavelengths spanning the near- and mid-IR using standard nonlinear crystals....

  11. Reliability of engineering methods of assessment the critical buckling load of steel beams

    Science.gov (United States)

    Rzeszut, Katarzyna; Folta, Wiktor; Garstecki, Andrzej

    2018-01-01

    In this paper the reliability assessment of buckling resistance of steel beam is presented. A number of parameters such as: the boundary conditions, the section height to width ratio, the thickness and the span are considered. The examples are solved using FEM procedures and formulas proposed in the literature and standards. In the case of the numerical models the following parameters are investigated: support conditions, mesh size, load conditions, steel grade. The numerical results are compared with approximate solutions calculated according to the standard formulas. It was observed that for high slenderness section the deformation of the cross-section had to be described by the following modes: longitudinal and transverse displacement, warping, rotation and distortion of the cross section shape. In this case we face interactive buckling problem. Unfortunately, neither the EN Standards nor the subject literature give close-form formulas to solve these problems. For this reason the reliability of the critical bending moment calculations is discussed.

  12. Structural Aspects of Railway Truss Bridges Affecting Transverse Shear Forces in Steel-Concrete Composite Decks

    Directory of Open Access Journals (Sweden)

    Siekierski Wojciech

    2015-03-01

    Full Text Available At the steel-concrete interface, the horizontal shear forces that are transverse to cross beams occur due to joint action of the steel-concrete composite deck and the truss girders. Numerical analysis showed that values of the forces are big in comparison to the longitudinal shear forces. In both cases extreme force values occur near side edges of a slab. The paper studies possibilities of reduction of these shear forces by structural alterations of the following: rigidity of a concrete slab, arrangement of a wind bracing, arrangement of concrete slab expansion joints. An existing railway truss bridge span has been analysed. Numerical analysis shows that it is possible to reduce the values of shear forces transverse to cross beams. It may reach 20% near the side edges of slabs and 23% in the centre of slab width.

  13. Corrosion scenario development for corrosion lifetime prediction of carbon steel used for geological disposal package

    International Nuclear Information System (INIS)

    Fukuda, Takanori; Nakayama, Guen; Akashi, Masatsune

    1994-01-01

    A corrosion scenario has been developed in an attempt to ensure the long-term integrity of carbon steel geological disposal packages for high-level nuclear waste. As the service life of the packages must span 1,000-10,000 years, the temperature, pH, and amount of oxygen, in the disposal facilities can hardly be expected to remain constant. Therefore, we clarified a system for predicting the corrosion lifetime of packages, taking into account long-term changes in the types of corrosion of carbon steel in disposal facilities relative to changes in the conditions of such facilities. This corrosion scenario charts the possible types of corrosion (i.e., general corrosion, stress corrosion cracking (SCC), and crevice corrosion) to which packages are subjected

  14. Ultimate Capacity of Uniaxially Compressed Steel Plates Strengthened by CFRP

    Science.gov (United States)

    Tao, Xin; Cao, S. Y.

    2017-06-01

    This paper presents experimental studies on the ultimate capacity of steel plates strengthened by Carbon Fiber-reinforced polymer (CFRP). Some 40 plates are tested under uniaxial compression along its longitudinal direction. The effect of CFRP pasting, plate slenderness ratio and the boundary conditions are illustrated on the studies. The study shows that the steel plates strengthened by CFRP exhibited higher capacity in comparison to similar plates without CFRP. It also can be seen that multi-layers CFRP pasting were better than the single layer, pasting multi-direction is better than pasting uni-direction, pasting the transverse layer outside is better than pasting the longitudinal layer outside, and the effect of longitudinal layer was better than the transverse layer.

  15. Recent Ship Steels and Some Considerations in Their Welding-TMCP Steel-

    OpenAIRE

    Hiroshige, Kitada; Hull Department

    1986-01-01

    The volume of ships built with high tensile steel (HT steel) at various shipyards has been on the steep increase these days. Among HT steels, the consumption of TMCP steel (TM type HT) is particularly significant. The reasons behind such a sharp increase in the use of TMCP steel may be identified in that the steel of this type can be manufactured with less consumptions of energy and natural resources and that it promises an added advantage of better welding results by the improved material ch...

  16. Analysis of G52-28 carbon steel exposed in GS1 column of isotopic exchange

    International Nuclear Information System (INIS)

    Velciu, Lucian; Dinu, Alice; Doanta, Dan; Dragomir, Stefan; Popa, L

    2008-01-01

    This paper presents some analysis performed on G52-28 carbon steel samples exposed in GS1 column of ROMAG-PROD Heavy Water Plant at Drobeta - Turnu Severin, Romania. The samples were maintained in isotopic exchange column on all period of its continuous working span (around 2.5 years). Analysis consisted in the quality evaluation of the structural material and the layer formed, after exposed period, using following methods: optic microscopy (metallography), scanning electron microscopy (SEM), and traction and adherence tests. (authors)

  17. Differences in short-term memory span of social sciences, science and engineering, and business majors

    Science.gov (United States)

    Khan, Naeem Ullah

    This study investigated the difference in the short-term memory span of students of three major groups, namely Social Sciences, Science and Engineering, and Business. This study was designed to answer the following two questions: (1) Is there a difference between short-term memory span, measured by digit span, among the students in or intended for Social Sciences, Science and Engineering, and Business majors? (2) Is there a difference of short-term memory span, measured by word span, among students in or intended for Social Sciences, Science and Engineering, and Business majors? For answering these two questions, inferential and descriptive statistics were used. Analysis of Variance (ANOVA) was used to compare the means of the scores of digit span and word span among the three major groups. The means of digit span and word span among the three groups were compared to find out if a statistically significant difference existed among them or not. The observations were recorded at the level of significance at alpha = .05, and highly significant at alpha = .01. The answer to the first question is yes. The results of this study showed a statistically significant difference in the means of the digit span of the three major groups of students in or intended for Social Sciences, Science and Engineering, and Business. The mean scaled score for digit span was 12.88 for Social Sciences, 14.27 for Science and Engineering, and 15.33 for Business majors, respectively. The means of the free recalls word span of the three groups was 7.23 for Social Sciences, 7.89 for Science and Engineering, and 7.12 for Business majors, respectively. No significant difference was observed in the means of the word span of the three groups. In general observations, it is noted that students want to stay in the subjects or majors in which they can perform well or feel comfortable. In addition to this, students are screened in the school system due to levels of performance or selection pressure

  18. Corrigendum: Childhood Adversity, Self-Esteem, and Diurnal Cortisol Profiles Across the Life Span.

    Science.gov (United States)

    2018-01-01

    Original article: Zilioli, S., Slatcher, R. B., Chi, P., Li, X., Zhao, J., & Zhao, G. (2016). Childhood adversity, self-esteem, and diurnal cortisol profiles across the life span. Psychological Science, 27, 1249-1265. doi:10.1177/0956797616658287.

  19. Impact of sensory acuity on auditory working memory span in young and older adults.

    Science.gov (United States)

    Baldwin, Carryl L; Ash, Ivan K

    2011-03-01

    The impact of sensory acuity, processing speed, and working memory capacity on auditory working memory span (L-span) performance at 5 presentation levels was examined in 80 young adults (18-30 years of age) and 26 older adults (60-82 years of age). Lowering the presentation level of the L-span task had a greater detrimental effect on the older adults than on the younger ones. Furthermore, the relationship between sensory acuity and L-span performance varied as a function of age and presentation level. These results suggest that declining acuity plays an important explanatory role in age-related declines in cognitive abilities. (c) 2011 APA, all rights reserved.

  20. Time spans between price maxima and price minima in stock markets

    Science.gov (United States)

    Zou, Yongjie; Li, Honggang

    2014-02-01

    We empirically investigate the distribution of time spans between price maxima and price minima in international stock markets, where a time span is defined as the time interval between a local price minimum and a local price maximum, and local price extrema are identified by a method introduced by Preis and Stanley (Preis et al. (2011), Preis (2011), Preis and Stanley (2011, 2010), Preis (2010), Preis and Stanley (2010), Stanley et al. (2010), Preis and Stanley (2009)). The empirical results show that both the tail distributions of time spans from local price maxima to local price minima and the tail distributions of time spans from local price minima to local price maxima yield an exponential distribution. In addition, price rise/fall asymmetry is observed by comparing the values of the exponents of the distribution curves. These results are robust across eight representative stock markets.