WorldWideScience

Sample records for single sign-on solutions

  1. CERN single sign on solution

    International Nuclear Information System (INIS)

    Ormancey, E

    2008-01-01

    The need for Single Sign On has always been restricted by the absence of cross platform solutions: a single sign on working only on one platform or technology is nearly useless. The recent improvements in Web Services Federation (WS-Federation) standard enabling federation of identity, attribute, authentication and authorization information can now provide real extended Single Sign On solutions. Various solutions have been investigated at CERN and now, a Web SSO solution using some parts of WS-Federation technology is available. Using the Shibboleth Service Provider module for Apache hosted web sites and Microsoft ADFS as the identity provider linked to Active Directory user, users can now authenticate on any web application using a single authentication platform, providing identity, user information (building, phone...) as well as group membership enabling authorization possibilities. A typical scenario: a CERN user can now authenticate on a Linux/Apache website using Windows Integrated credentials, and his Active Directory group membership can be checked before allowing access to a specific web page

  2. Single Sign On Internal (SSOi)

    Data.gov (United States)

    Department of Veterans Affairs — Provides single sign-on solution for internal facing VA applications. Allows internal users access to a variety of VA systems and applications using a reduced set of...

  3. A Proposed Solution for Managing Doctor's Smart Cards in Hospitals Using a Single Sign-On Central Architecture

    OpenAIRE

    Mauro, Christian;Sunyaev, Ali;Leimeister, Jan Marco;Schweiger, Andreas;Krcmar, Helmut

    2014-01-01

    This paper describes a single sign-on solution for the central management of health care provider?s smart cards in hospitals. The proposed approach which is expected to be an improvement over current methods is made possible through the introduction of a national healthcare telematics infrastructure in Germany where every physician and every patient will automatically be given an electronic health smart card (for patients) and a corresponding health professional card (for health care provider...

  4. Single Sign-on Authentication server (part of CLARIN infrastructure)

    NARCIS (Netherlands)

    de Jong, H.A.; Maas, M.

    2013-01-01

    The Huygens Single Sign-on server allows federated logins (authentication) via SURFconext affiliates thus facilitating all connected (academic / research) institutes to use online Huygens ING software services.

  5. Single Thing Sign On Identity Management for Internet of Things

    DEFF Research Database (Denmark)

    Zdravkova, Vanya; Mihaylov, Mihail Rumenov; Mihovska, Albena Dimitrova

    2016-01-01

    —Within the context of heterogeneous Internet of Things (IoT) network driven by Machine-to-Machine (M2M) communications there is a need for a proper user identification and Identity Management (IdM) mechanisms which to involve all of the objects in the IoT. The paper addresses user identification...... by proposing Single Thing Sign On (STSO) IdM architecture for IoT, where the end-user is in the middle of a user-centered services ecosystem. The proposed scheme enables user recognition and services access only by identification of one of the “things” related to the user such as personal computing devices...

  6. Clinical impact and value of workstation single sign-on.

    Science.gov (United States)

    Gellert, George A; Crouch, John F; Gibson, Lynn A; Conklin, George S; Webster, S Luke; Gillean, John A

    2017-05-01

    CHRISTUS Health began implementation of computer workstation single sign-on (SSO) in 2015. SSO technology utilizes a badge reader placed at each workstation where clinicians swipe or "tap" their identification badges. To assess the impact of SSO implementation in reducing clinician time logging in to various clinical software programs, and in financial savings from migrating to a thin client that enabled replacement of traditional hard drive computer workstations. Following implementation of SSO, a total of 65,202 logins were sampled systematically during a 7day period among 2256 active clinical end users for time saved in 6 facilities when compared to pre-implementation. Dollar values were assigned to the time saved by 3 groups of clinical end users: physicians, nurses and ancillary service providers. The reduction of total clinician login time over the 7day period showed a net gain of 168.3h per week of clinician time - 28.1h (2.3 shifts) per facility per week. Annualized, 1461.2h of mixed physician and nursing time is liberated per facility per annum (121.8 shifts of 12h per year). The annual dollar cost savings of this reduction of time expended logging in is $92,146 per hospital per annum and $1,658,745 per annum in the first phase implementation of 18 hospitals. Computer hardware equipment savings due to desktop virtualization increases annual savings to $2,333,745. Qualitative value contributions to clinician satisfaction, reduction in staff turnover, facilitation of adoption of EHR applications, and other benefits of SSO are discussed. SSO had a positive impact on clinician efficiency and productivity in the 6 hospitals evaluated, and is an effective and cost-effective method to liberate clinician time from repetitive and time consuming logins to clinical software applications. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  7. Analisa Kecepatan Transfer Data Pada Perancangan Hotspot Sederhana Dengan System Single Sign On Di Perkantoran

    Directory of Open Access Journals (Sweden)

    Bela Neziah Arum Pangesti

    2017-05-01

    Full Text Available The problems office in the utilization of wireless technology has widely used but sometimes without take into the number of users, so it is not mangkus. The networking system for small office can be use wireless simple system. Most of the office has applied hotspot but that is old system, one account for all people using internet access. Single sign-on is a system services of hotspot, this system verifying an account for each user so people have different and username dan a password. The methodology used is literature review, analysis, design, implementation, testing and analysis of the data transfer rate. The hotspot with a single sign-on system using mikrotik, and access point, the connected with networking devices in the office. Winbox tools is used to configuration. Testing with the user had been connected to the hotspot system single sign on. Methods of test to user login on the system single sign-on is the black box texting. Testing the speed of data transfer is used staff user and guest user who uploaded three types of files to the drive with diffrent bandwidth. Then the network sniffing is used tools wireshark. The results from this study is simple hotspot service with single sign-on system for office and from the analysis of the data transfer rate was known the data transfer rate on the staff user and guest user to the three types of file is a type of word files greater than PDF and PPT.

  8. Penggunaan Single Sign On (SSO pada Jaringan Internet Badan Pengkajian dan Penerapan Teknologi (BPPT

    Directory of Open Access Journals (Sweden)

    Johan Muliadi Kerta

    2011-12-01

    Full Text Available Using various applications needs more than one authentication or user and password to login. Users in BPPT found this problem on their network application. Implementation of Single Sign On can help users to use only one authentication for many applications. Therefore a research is conducted to design and implement Single Sign On system that simplify and facilitate the user's email account to access application. Data are collected from literature study, system observation, and interviews while the design uses Network Development Life Cycle (NDLC method. The research results in a Single Sign On system that utilizez Lightweight Directory Access Protocol (LDAP. In addition, Remote Authentication Dial-In User Service (RADIUS is managed in accordance with the needs of the institution. Single Sign On system designed runs well and is able to provide conveniences for the user to use the services of existing applications, as it provides a standard email address to the user's identity. It also helps administrators to perform control of users trying to login. 

  9. SSO - Single-Sign-On Profile: Authentication Mechanisms Version 2.0

    Science.gov (United States)

    Taffoni, Giuliano; Schaaf, André; Rixon, Guy; Major, Brian; Taffoni, Giuliano

    2017-05-01

    Approved client-server authentication mechanisms are described for the IVOA single-sign-on profile: No Authentication; HTTP Basic Authentication; TLS with passwords; TLS with client certificates; Cookies; Open Authentication; Security Assertion Markup Language; OpenID. Normative rules are given for the implementation of these mechanisms, mainly by reference to pre-existing standards. The Authorization mechanisms are out of the scope of this document.

  10. Implementation of a single sign-on system between practice, research and learning systems.

    Science.gov (United States)

    Purkayastha, Saptarshi; Gichoya, Judy W; Addepally, Siva Abhishek

    2017-03-29

    Multiple specialized electronic medical systems are utilized in the health enterprise. Each of these systems has their own user management, authentication and authorization process, which makes it a complex web for navigation and use without a coherent process workflow. Users often have to remember multiple passwords, login/logout between systems that disrupt their clinical workflow. Challenges exist in managing permissions for various cadres of health care providers. This case report describes our experience of implementing a single sign-on system, used between an electronic medical records system and a learning management system at a large academic institution with an informatics department responsible for student education and a medical school affiliated with a hospital system caring for patients and conducting research. At our institution, we use OpenMRS for research registry tracking of interventional radiology patients as well as to provide access to medical records to students studying health informatics. To provide authentication across different users of the system with different permissions, we developed a Central Authentication Service (CAS) module for OpenMRS, released under the Mozilla Public License and deployed it for single sign-on across the academic enterprise. The module has been in implementation since August 2015 to present, and we assessed usability of the registry and education system before and after implementation of the CAS module. 54 students and 3 researchers were interviewed. The module authenticates users with appropriate privileges in the medical records system, providing secure access with minimal disruption to their workflow. No passwords requests were sent and users reported ease of use, with streamlined workflow. The project demonstrates that enterprise-wide single sign-on systems should be used in healthcare to reduce complexity like "password hell", improve usability and user navigation. We plan to extend this to work with other

  11. Survey Tingkat Penggunaan Single Sign On pada 500 Situs Peringkat Teratas Alexa.com

    Directory of Open Access Journals (Sweden)

    I Wayan Manik Suhartanta

    2017-04-01

    Full Text Available Advances in Internet technology has provided a new market for the growth of the service provider. New sites appear in large numbers every year. This gives a new problem for users of the service. Users are forced to memorize many username and password to access the service. Overcoming it is a new emerging technology, the technology called Single Sign On (SSO. SSO offers simple authentication process for users to access many services sites. But the level of confidence of users and service providers, in the use of SSO technology have not been investigated. In this research shows that the rate of utilizing the SSO technology of the top 500 sites on alexa.com by 31% (155 websites. And the level of utilization of the SSO more than one provider, by 41%. In studies it appears that the most used SSO services provider is google followed by facebook and twitter. (turnitin check 9% Keyword— Single Sign On (SSO, Computer Security, Authentication DOI: 10.24843/MITE.1601.07

  12. Campus Single Sign-On und hochschulübergreifendes Identity Management

    Science.gov (United States)

    Hommel, Wolfgang

    Das im Rahmen von IntegraTUM für die TUM geschaffene Identity & Access Management System setzt das Paradigma unified login um, d. h. ein Benutzer kann alle für ihn relevanten Dienste innerhalb der Hochschule mit derselben Loginname-/Passwortkombination nutzen. Dieser Artikel zeigt, wie auf Basis der Software Shibboleth und der deutschlandweiten Hochschulföderation DFN-AAI als weitere Mehrwerte das campusweite web single sign-on und die nahtlose Nutzung zahlreicher externer Web-Anwendungen erreicht werden. Als Beispiel für die Abläufe bei der Erschließung neuer Dienste für die hochschulübergreifende Nutzung wird die Anbindung von Learning Management Systemen auf Basis des DFN-AAI E-Learning-Profils diskutiert. Den umfassenden Vorteilen werden schließlich die aktuellen technischen Grenzen bei der Umsetzung des hochschulübergreifenden Identity Management gegenübergestellt.

  13. Virtual Campus Hub: A single sign-on system for cross-border collaboration

    DEFF Research Database (Denmark)

    Badger, Merete; Vercoulen, F.; Monaco, L.

    2013-01-01

    Four technical universities in Europe work together in the EU-funded project Virtual Campus Hub (FP7 RI-283746, www.virtualcampushub.eu) to lower the technical barriers for cross-border collaboration. Universities have many connections to the outside world (e.g. to other universities, to joint...... the applications used there. The objective of Virtual Campus Hub is to use state-of-the-art European e-Infrastructures (Géant) in combination with federated authentication to establish a single sign-on system between universities. A pilot environment, which links applications from the four partner universities...... to European e-Infrastructures relies upon the National Research and Education Networks (NRENs) which are not geared towards commercial enterprises at present. A range of applications for online teaching and collaboration has been developed as part of the Virtual Campus Hub project. These include remote...

  14. Revolution when logging into CERN: the new Single Sign-On Portal

    CERN Multimedia

    CERN Single Sign-On Team & the Computer Security Team

    2013-01-01

    Up to now, access to non-public CERN web applications was protected by the CERN Single Sign-On portal (CERN SSO) and required your CERN password. However, given that many people have also a computing account at their home institute, or with Facebook or Google, wouldn’t it make sense to allow those accounts to be used for logging into CERN as well?    We believe it does, and therefore the CERN SSO Team has extended the SSO portal’s functionality and laid the foundations for using so-called “Public Accounts” and “Federated Accounts” as well as for Second-Factor Authentication. The changes will be deployed on 21 January. You can have a sneak preview here. It is now up to you, web administrators and website owners, to take advantage of these nice new features, and enable your clients to use their external accounts: Public Accounts Some web applications are quasi-public and only require an e-mail address as an internal handle (like ...

  15. Tensions of network security and collaborative work practice: understanding a single sign-on deployment in a regional hospital.

    Science.gov (United States)

    Heckle, Rosa R; Lutters, Wayne G

    2011-08-01

    Healthcare providers and their IT staff, working in an effort to balance appropriate accessibility with stricter security mandates, are considering the use of a single network sign-on approach for authentication and password management. Single sign-on (SSO) promises to improve usability of authentication for multiple-system users, increase compliance, and help curb system maintenance costs. However, complexities are introduced when SSO is placed within a collaborative environment. These complexities include unanticipated workflow implications that introduce greater security vulnerability for the individual user. OBJECTIVES AND METHODOLOGY: In this work, we examine the challenges of implementing a single sign-on authentication technology in a hospital environment. The aim of the study was to document the factors that affected SSO adoption within the context of use. The ultimate goal is to better inform the design of usable authentication systems within collaborative healthcare work sites. The primary data collection techniques used are ethnographically informed - observation, contextual interviews, and document review. The study included a cross-section of individuals from various departments and varying rolls. These participants were a mix of both clinical and administrative staff, as well as the Information Technology group. The field work revealed fundamental mis-matches between the technology and routine work practices that will significantly impact its effective adoption. While single sign-on was effective in the administrative offices, SSO was not a good fit for collaborative areas. The collaborative needs of the clinical staff unearthed tensions in its implementation. An analysis of the findings revealed that the workflow, activities, and physical environment of the clinical areas create increased security vulnerabilities for the individual user. The clinical users were cognizant of these vulnerabilities and this created resistance to the implementation due

  16. Informatics in radiology: integration of the medical imaging resource center into a teaching hospital network to allow single sign-on access.

    Science.gov (United States)

    Prevedello, Luciano M; Andriole, Katherine P; Khorasani, Ryan Roobian Ramin

    2009-01-01

    The RSNA Medical Imaging Resource Center (MIRC) software is an open-source program that allows users to identify, index, and retrieve images, teaching files, and other radiologic data that share a common underlying structure. The software is being continually improved as new challenges and different needs become apparent. Although version T30 is easily installed on a stand-alone computer, its implementation at healthcare enterprises with complex network architecture may be challenging with respect to security because users cannot log on by using a standard enterprise-wide authentication protocol. Instead, authentication takes place through the local MIRC database, creating security concerns and potential organizational problems. In this setting, the Lightweight Directory Access Protocol (LDAP) can be used to provide a single sign-on environment and increase authentication security. A commercial directory service using LDAP has been successfully integrated with MIRC in a large multifacility enterprise to provide single sign-on capability compatible with the institutional networking policies for password security. Copyright RSNA, 2009

  17. Changes in susceptibility signs on serial T2*-weighted single-shot echo-planar gradient-echo images in acute embolic infarction: comparison with recanalization status on 3D time-of-flight magnetic resonance angiography

    International Nuclear Information System (INIS)

    Shinohara, Yuki; Kinoshita, Toshibumi; Kinoshita, Fumiko

    2012-01-01

    The present study compares changes in susceptibility signs on follow-up single-shot echo-planar gradient-echo T2*-weighted images (GRE-EPI) with vascular status on follow-up magnetic resonance angiography (MRA) in acute embolic infarction. Twenty consecutive patients with acute embolic infarction repeatedly underwent MR imaging including GRE-EPI and MRA using a 1.5-T MR superconducting system. All patients underwent initial MR examination within 24 h of onset and follow-up MR imaging within 1 month after onset. Changes in susceptibility signs on follow-up GRE-EPI were compatible with vascular status on follow-up MRA in 19 of the 20 patients. Susceptibility signs disappeared with complete recanalization in 13 patients, migrated with partial recanalization in 3, did not change together with the absence of recanalization in 2, and became extended together with the absence of recanalization in 1. Cerebral hemorrhage obscured susceptibility signs in the one remaining patient. Susceptibility signs on follow-up GRE-EPI can reflect changes in an acute embolus, such as recanalization or migration, in this study. Serial GRE-EPI in acute embolism complements the diagnostic certainty of MRA by directly detecting an embolus as a susceptibility sign. (orig.)

  18. The classification of the single travelling wave solutions to the ...

    Indian Academy of Sciences (India)

    The discrimination system for the polynomial method is applied to variant Boussinesq equations to classify single travelling wave solutions. In particular, we construct corresponding solutions to the concrete parameters to show that each solution in the classification can be realized.

  19. Laryngopyocele: signs on computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Nazaroglu, Hasan E-mail: hnazarog@dicle.edu.tr; Oezates, Mustafa; Uyar, Asur; Deger, Emin; Simsek, Masum

    2000-01-01

    A laryngocele is an air-filled dilation of the saccule of the larynx. An infected laryngocele is called a laryngopyocele. Our experience with a case of laryngopyocele with signs on computed tomography before and after antibiotic therapy is presented since laryngopyocele is more unusual.

  20. Laryngopyocele: signs on computed tomography

    International Nuclear Information System (INIS)

    Nazaroglu, Hasan; Oezates, Mustafa; Uyar, Asur; Deger, Emin; Simsek, Masum

    2000-01-01

    A laryngocele is an air-filled dilation of the saccule of the larynx. An infected laryngocele is called a laryngopyocele. Our experience with a case of laryngopyocele with signs on computed tomography before and after antibiotic therapy is presented since laryngopyocele is more unusual

  1. The classification of the single travelling wave solutions to the ...

    Indian Academy of Sciences (India)

    2016-09-21

    Sep 21, 2016 ... The discrimination system for the polynomial method is applied to variant Boussinesq equations to classify single travelling wave solutions. In particular, we construct corresponding solutions to the concrete parameters to show that each solution in the classification can be realized. Keywords. Exact solution ...

  2. Single-peak solitary wave solutions for the variant Boussinesq ...

    Indian Academy of Sciences (India)

    ∈ H1 loc(R). (iii) Similar to the proof of the above (ii),we omit it here. This completes the proof. 3. Smooth and cusped single-peak solitary wave solutions. Theorem 2.4 gives a classification for all single-peak solitary wave solutions for eq. (2.4).

  3. The classification of the single travelling wave solutions to the ...

    Indian Academy of Sciences (India)

    Exact solution; single travelling wave solution; complete discrimination system for the polynomial; the generalized PC ... Recently, a method named as the complete discrimination system for polynomial method has been proposed by Liu [11–16]. ...... to the generalized PC equation. By integrating and taking some trans-.

  4. Classification of single travelling wave solutions to the generalized ...

    Indian Academy of Sciences (India)

    c Indian Academy of Sciences. Vol. 80, No. 5. — journal of. May 2013 physics pp. 771–783. Classification of single travelling wave solutions to the generalized Zakharov–Kuznetsov equation ... linear ion-acoustic waves in a strongly magnetized lossless plasma composed of cold ions and hot isothermal electrons [10].

  5. The classification of the single travelling wave solutions to the ...

    Indian Academy of Sciences (India)

    The classification of the single travelling wave solutions to the generalized Pochhammer–Chree equation. HUI-LING FAN. ∗ and XIN LI. School of Science, Heilongjiang Bayi Agriculture University, Daqing 163319, China. ∗. Corresponding author. E-mail: huilingnepu@126.com. MS received 11 June 2013; revised 2 ...

  6. The classification of single travelling wave solutions to the Camassa ...

    Indian Academy of Sciences (India)

    Introduction. Classifications of single travelling wave solutions to some nonlinear differential equations have been obtained extensively by the complete discrimination system for polynomial method proposed by Liu [1–7]. Furthermore, Wang and Li [8] used Liu's method and factorization method proposed by Cornejo-Pérez ...

  7. Interpolation solution of the single-impurity Anderson model

    International Nuclear Information System (INIS)

    Kuzemsky, A.L.

    1990-10-01

    The dynamical properties of the single-impurity Anderson model (SIAM) is studied using a novel Irreducible Green's Function method (IGF). The new solution for one-particle GF interpolating between the strong and weak correlation limits is obtained. The unified concept of relevant mean-field renormalizations is indispensable for strong correlation limit. (author). 21 refs

  8. Lattice diffusion of a single molecule in solution

    Science.gov (United States)

    Ruggeri, Francesca; Krishnan, Madhavi

    2017-12-01

    The ability to trap a single molecule in an electrostatic potential well in solution has opened up new possibilities for the use of molecular electrical charge to study macromolecular conformation and dynamics at the level of the single entity. Here we study the diffusion of a single macromolecule in a two-dimensional lattice of electrostatic traps in solution. We report the ability to measure both the size and effective electrical charge of a macromolecule by observing single-molecule transport trajectories, typically a few seconds in length, using fluorescence microscopy. While, as shown previously, the time spent by the molecule in a trap is a strong function of its effective charge, we demonstrate here that the average travel time between traps in the landscape yields its hydrodynamic radius. Tailoring the pitch of the lattice thus yields two different experimentally measurable time scales that together uniquely determine both the size and charge of the molecule. Since no information is required on the location of the molecule between consecutive departure and arrival events at lattice sites, the technique is ideally suited to measurements on weakly emitting entities such as single molecules.

  9. Unidirectional seeded single crystal growth from solution of benzophenone

    Science.gov (United States)

    Sankaranarayanan, K.; Ramasamy, P.

    2005-07-01

    A novel crystal growth method has been established for the growth of single crystal with selective orientation at room temperature. Using volatile solvent, the saturated solution containing the material to be crystallized was taken in an ampoule and allowed to crystallize by slow solvent evaporation assisted with a ring heater. The orientation of the growing crystal was imposed by means of a seed fixed at the bottom of the ampoule. By selecting a suitable ring heater voltage and by controlling the ring heater voltage, nucleation and the growth rate of the crystal were controlled more effectively. By employing this novel method, benzophenone single crystal ingots of diameters 10 and 20 mm and length more than 50 mm were successfully grown using xylene as solvent. The ease in scaling up of diameter from 10 to 20 mm shows the vital advantage of this technique. It was possible to achieve solute-crystal conversion efficiency of 100 percent. The grown benzophenone crystal was characterized by FTIR, TG and DTA, powder X-ray diffraction, X-ray rocking curve, optical transmission study and powder SHG measurement. The results show that the crystal quality is at least as good as the quality of the crystal grown by other known methods. Also, microbial growth was naturally avoided in this method, as the fresh solution is constantly made available for the growing crystal.

  10. Single Molecule Electrochemical Detection in Aqueous Solutions and Ionic Liquids.

    Science.gov (United States)

    Byers, Joshua C; Paulose Nadappuram, Binoy; Perry, David; McKelvey, Kim; Colburn, Alex W; Unwin, Patrick R

    2015-10-20

    Single molecule electrochemical detection (SMED) is an extremely challenging aspect of electroanalytical chemistry, requiring unconventional electrochemical cells and measurements. Here, SMED is reported using a "quad-probe" (four-channel probe) pipet cell, fabricated by depositing carbon pyrolytically into two diagonally opposite barrels of a laser-pulled quartz quadruple-barreled pipet and filling the open channels with electrolyte solution, and quasi-reference counter electrodes. A meniscus forms at the end of the probe covering the two working electrodes and is brought into contact with a substrate working electrode surface. In this way, a nanogap cell is produced whereby the two carbon electrodes in the pipet can be used to promote redox cycling of an individual molecule with the substrate. Anticorrelated currents generated at the substrate and tip electrodes, at particular distances (typically tens of nanometers), are consistent with the detection of single molecules. The low background noise realized in this droplet format opens up new opportunities in single molecule electrochemistry, including the use of ionic liquids, as well as aqueous solution, and the quantitative assessment and analysis of factors influencing redox cycling currents, due to a precisely known gap size.

  11. Hydrogen solid solutions in niobium - molybdenum single crystal alloys

    International Nuclear Information System (INIS)

    Silva, J.R.G. da; Ishikawa, T.T.

    1981-01-01

    The temperature variation of the hydrogen solubility in a series of single crystal Nb-Mo alloys ('binary solvents') in equilibrium with the gaseous phase at atmospheric pressure is presented. The partial thermodynamic properties of the intersticially dissolved hydrogen atoms were calculated from of solubility versus temperature curves. The hydrogen solution obeys the quasi-regular model at all the compositions of the investigated alloys. The variation of the partial entalphy Hu sup(-) with the solvent alloys composition (Mo/Nb + Mo ratio) is compared with the variation of the electronic structure of the solvent. The non-random solute distribution in the binary solvent lattice is shown, with the H atoms prefering interstitial sites next to Nb atoms. (Author) [pt

  12. Quality Scalability Compression on Single-Loop Solution in HEVC

    Directory of Open Access Journals (Sweden)

    Mengmeng Zhang

    2014-01-01

    Full Text Available This paper proposes a quality scalable extension design for the upcoming high efficiency video coding (HEVC standard. In the proposed design, the single-loop decoder solution is extended into the proposed scalable scenario. A novel interlayer intra/interprediction is added to reduce the amount of bits representation by exploiting the correlation between coding layers. The experimental results indicate that the average Bjøntegaard delta rate decrease of 20.50% can be gained compared with the simulcast encoding. The proposed technique achieved 47.98% Bjøntegaard delta rate reduction compared with the scalable video coding extension of the H.264/AVC. Consequently, significant rate savings confirm that the proposed method achieves better performance.

  13. Conformation of Single Pentablock Ionomer Chains in Dilute Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Aryal, Dipak [Clemson Univ., SC (United States); Perahia, Dvora [Clemson Univ., SC (United States); Grest, Gary S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-04-01

    The conformation of single chain pentablock ionomers (A-B-C-B-A) containing randomly sulfonated polystyrene in the center block, tethered to poly-ethylene-r-propylene end-capped by poly-t-butyl styrene is studied in dilute solutions by molecular dynamics simulations. Multi-block copolymers offer a means to tailor several properties into one molecule, taking advantage of their rich phase diagram together with unique properties of specific blocks. For this pentablock the ionic block facilitates transport while the A and B components are incorporated for mechanical stability. The present study investigates the confirmation of a single chain of pentablock ionomer of molecular weight Mw ~ 50,000 g/mol and sulfonated polystyrene of the same molecular weight as that of the center block for six sulfonation fractions f from f=0.0-0.55. For the sulfonated systems Na+ counterions are included. Results for the equilibrium conformation of the chains and the three blocks in water and 1:1 mixture of cyclohexane and n-heptane are compared to simulations in implicit poor solvents with dielectric constants ε =1.0 and 77.73. In water, the pentablock is collapsed with sulfonated groups on the outer surface. As the sulfonation fraction f increases, the ionic, center block is increasingly segregated from the hydrophobic regions. In the 1:1 mixture of cyclohexane and heptane both the flexible and end blocks are swollen while the center ionic block is collasped for f>0, while for f=0 all blocks are swollen. In both implicit poor solvents the pentablock is collapsed into a nearly spherical shape for all f. The sodium counterions are dispersed widely throughout the simulation cell for both water and ε =77.73 whereas for ε =1.0 the counterions are largely condensed on the collapsed pentablock.

  14. The classification of the single travelling wave solutions to the ...

    Indian Academy of Sciences (India)

    2016-09-21

    Sep 21, 2016 ... For example,. Fan used Liu's method [11,12] to invest the generalized equal width equation and Pochhammer–Chree equa- tion, and she obtained all the possible travelling wave solutions including elliptic functions and hyperelliptic functions. In this paper, we consider the variant Boussinesq equations [13].

  15. Signs on bricks of the Semikarakorsk fortress

    Directory of Open Access Journals (Sweden)

    Valeriy S. Flerov,

    2015-12-01

    Full Text Available The article presents a study of bricks with different signs from Semikarakorsk fortress of the Khazar Khaganate on the Lower Don, dating to the late 8th – early 9th centuries. It deals with about one hundred burnt bricks, mainly in fragments, and a fragment of adobe brick, each marked with signs. Signs on bricks from Semikarakorsk fortress are less common than on bricks of Sarkel and Pravoberezhnaya Tsimlyanskaya fortresses, but today, it is the unique collection on the Lower Don that allows tracking how various types of signs are distributed across different sections of the fortress. This approach gives new information on organization of construction business in Eastern Europe in the early Middle Ages, and specifically in Khazar Khaganate. In this regard, the Semikarakorsk collection is comparable to the one from Pliska site. Typological analysis has shown that the Semikarakorsk corpus of signs is less diverse compared to Sarkel and the Mayaki hillfort. Two types of signs are most numerous – bellshaped and trident with a rectangular cup. The former is localized on the northern wall of the fortress, while the latter near the citadel. There is a correlation between sizes of bricks and types of signs. Signs were typically produced by use of tools. Finger drawings are rare (12 %. Signs were applied on the top (during the manufacturing process side of the brick, on raw clay, before baking. The analysis of techniques and styles of drawing showed that similar signs were applied by different people.

  16. Accumulation of heavy metals from single and mixed metal solutions ...

    African Journals Online (AJOL)

    The usefulness of the intertidal gastropod Tympanotonus fuscatus L as a biomonitor of heavy metals in tropical estuaries was assessed. The periwinkles were collected from a site in the upper Bonny Estuary, Southern Nigeria and exposed in a series of experiments either singly or binary mixtures to copper, zinc and ...

  17. The classification of single travelling wave solutions to the Camassa ...

    Indian Academy of Sciences (India)

    solutions by using the discrimination system for two-order and three-order polynomial respectively. For saving space, we only consider the case of b = 3. Of course, we can give same treatment for other values of b. Substituting the expressions of p3(u) and q3(u) into eq. (4), and performing the trans- formation v = u − c − γ ...

  18. Solution Concept of Modular Single Phase Active Power Filters

    Directory of Open Access Journals (Sweden)

    Marek Roch

    2006-01-01

    Full Text Available This paper investigates a modular or a decentralised single-phase active power filter control strategy. It is based on the evaluation of the harmonic reference load currents for the active power filter blocks operating under specific harmonic frequencies. The underlying principle of the modular active power filter is explained and it is shown how the required reference harmonic currents can be evaluated. Simulation results demonstrated the improvement in the dynamic performance of the modular active power filter presented here in comparison with the conventional type.

  19. Functional Ceramic Ferroelectromagnetic Materials in Single Phase Solid-Solutions

    Science.gov (United States)

    2007-12-05

    PbTiO3)1-x, where x= 0.10, 0.20, 0.30, 0.40, 0.67. ( work is still going on) Introduction: Recently BaTiO3 is doped with Ni and Co to get...xBaxMnO3 was expected to enhance the magnetic properties. LaMnO3 is an antiferromagnetic insulator and have cubic perovskite structure. The doping with...research in solid solutions like x (BiFeO3)-(1-x) (PbTiO3) ( BF-PT), BiFeO3- BaTiO3 , BiFeO3- Pb(FeNb)O3, BiFeO3-ReFeO3- BaTiO3 .Mainly the aim of the

  20. Analytical solutions for efficient interpretation of single-well push-pull tracer tests

    Science.gov (United States)

    Single-well push-pull tracer tests have been used to characterize the extent, fate, and transport of subsurface contamination. Analytical solutions provide one alternative for interpreting test results. In this work, an exact analytical solution to two-dimensional equations descr...

  1. Smart field artillery information system: model development with an emphasis on collisions in Single Sign-On authentication / Интеллектуальная информационная система полевой артиллерии: разработка модели с акцентом на коллизии в аутентификации Single Sign-On / Pametni informacioni sistem poljske artiljerije - razvoj modela s težištem na kolizije u Single Sign-on autentifikaciji

    Directory of Open Access Journals (Sweden)

    Nikola S. Manev

    2017-04-01

    Full Text Available This paper proposes a model for a Smart Field Artillery Information System (SFAIS that can be used in a military environment. It is based on Service Oriented Architecture (SOA and Command, Control, Communications, Computers, and Intelligence Information Systems (C4I, as well as Geographical Information System (GIS technology. The system aims to contribute in increasing the level of the military’s capacity in the execution of operations in a multinational or a regional environment. In this context, the SFAIS provides a well-designed platform for interoperability with other actors in the same theater of military missions and joint operations. Moreover, the system will be used for educational purposes by being implemented in simulation centers and computer laboratories. This system will provide artillery personnel with proper education which will rely on - and is going to be conducted in - a simulated operational environment which will include the whole operational range of the artillery systems used (field of fire and the process of preparation of the elements as well as conducting the firing in a virtual environment. Additionally,and even more importantly, the probability of collisions in hash functions during Single Sign-on authentication is presented for proving existing security shortcomings in distributed computer systems. Also, studying specific security issues with the SOA based artillery information system emphasizes the significance of applying a military information system in a security environment. / В данной статье представлена модель интеллектуальной информационной системы полевой артиллерии (SFAIS, разработанная для военных целей и основанная на сервисно- ориентированной архитектуре (SOA, а также на C4I информационной системе и

  2. Single track and single layer formation in selective laser melting of niobium solid solution alloy

    Directory of Open Access Journals (Sweden)

    Yueling GUO

    2018-04-01

    Full Text Available Selective laser melting (SLM was employed to fabricate Nb-37Ti-13Cr-2Al-1Si (at% alloy, using pre-alloyed powders prepared by plasma rotating electrode processing (PREP. A series of single tracks and single layers under different processing parameters was manufactured to evaluate the processing feasibility by SLM, including laser power, scanning speed, and hatch distance. Results showed that continuous single tracks could be fabricated using proper laser powers and scanning velocities. Both the width of a single track and its penetration depth into a substrate increased with an increase of the linear laser beam energy density (LED, i.e., an increase of the laser power and a decrease of the scanning speed. Nb, Ti, Si, Cr, and Al elements distributed heterogeneously over the melt pool in the form of swirl-like patterns. An excess of the hatch distance was not able to interconnect neighboring tracks. Under improper processing parameters, a balling phenomenon occurred, but could be eliminated with an increased LED. This work testified the SLM-processing feasibility of Nb-based alloy and promoted the application of SLM to the manufacture of niobium-based alloys. Keywords: Additive manufacturing, Melt pool, Niobium alloy, Powder metallurgy, Selective laser melting

  3. Series solution for continuous population models for single and interacting species by the homotopy analysis method

    Directory of Open Access Journals (Sweden)

    Magdy A. El-Tawil

    2012-07-01

    Full Text Available The homotopy analysis method (HAM is used to find approximate analytical solutions of continuous population models for single and interacting species. The homotopy analysis method contains the auxiliary parameter $hbar,$ which provides us with a simple way to adjust and control the convergence region of series solution. the solutions are compared with the numerical results obtained using NDSolve, an ordinary differential equation solver found in the Mathematica package and a good agreement is found. Also the solutions are compared with the available analytic results obtained by other methods and more accurate and convergent series solution found. The convergence region is also computed which shows the validity of the HAM solution. This method is reliable and manageable.

  4. Model based analysis of the drying of a single solution droplet in an ultrasonic levitator

    DEFF Research Database (Denmark)

    Sloth, Jakob; Kiil, Søren; Jensen, Anker

    2006-01-01

    A model for the drying of a single solution droplet into a solid, dense particle is presented and simulations are made to achieve a more fundamental understanding of the single droplet drying process relevant in connection with spray drying processes. Model predictions of drying behaviour...... are compared to data for the drying of aqueous solutions of maltodextrin DE 15 and trehalose from experiments conducted using an ultrasonic levitator. Model predictions are in good agreement with the experimental data, indicating that the model describes the most important physical phenomena of the process....

  5. Highly simplified small molecular phosphorescent organic light emitting devices with a solution-processed single layer

    Directory of Open Access Journals (Sweden)

    Zhaokui Wang

    2011-09-01

    Full Text Available A highly simplified single layer solution-processed phosphorescent organic light emitting device (PHOLED with the maximum ηP 11.5 lm/W corresponding to EQE 9.6% has been demonstrated. The solution-processed device is shown having comparable even exceeding device performance to vacuum-processed PHOLED. The simplified device design strategy represents a pathway toward large area, low cost and high efficiency OLEDs in the future. The charge injection and conduction mechanisms in two solution- and vacuum-processed devices are also investigated by evaluating the temperature dependence of current density – voltage characteristics.

  6. Highly Luminescent Solution-Grown Thiophene-Phenylene Co-Oligomer Single Crystals

    NARCIS (Netherlands)

    Kudryashova, Lyudmila G.; Kazantsev, Maxim S.; Postnikov, Valery A.; Bruevich, Vladimir V.; Luponosov, Yuriy N.; Surin, Nikolay M.; Borshchev, Oleg V.; Ponomarenko, Sergei A.; Pshenichnikov, Maxim S.; Paraschuk, Dmitry Yu.

    2016-01-01

    Thiophene-phenylene co-oligomers (TPCOs) are among the most promising materials for organic light emitting devices. Here we report on record high among TPCO single crystals photoluminescence quantum yield reaching 60%. The solution-grown crystals are stronger luminescent than the vapor-grown ones,

  7. A Control Volume Model of Solute Transport in a Single Fracture

    Science.gov (United States)

    Kennedy, Christopher A.; Lennox, William C.

    1995-02-01

    A control volume model of solute transport through a single fracture in a porous matrix is developed. Application to problems of contaminant transport through fractured clay demonstrates several strong features of the method. The control volume approach inherently conserves mass and treats dispersivity at interfaces in a physically correct manner. By employing an upstream weighting scheme, based on the exact solution to the one-dimensional steady state advection-dispersion equation, the model proves to be more efficient than previous single-fracture models. The significance of matrix diffusion in the direction parallel to the fracture axis is investigated. For the transport of a nonreactive tracer through a 20-micrometer-wide fracture in clay material, analytical solutions based on one-dimensional matrix diffusion are erroneous for flow velocities of less than 1 m/day. The influence of boundary conditions on two-dimensional matrix diffusion is considered, and the clean-up of a contaminated fracture is simulated.

  8. Growth and Characteristics of Bulk Single Crystals Grown from Solution on Earth and in Microgravity

    Science.gov (United States)

    Aggarwal, M. D.; Batra, A. K.; Lal, R. B.; Penn, Benjamin G.; Frazier, Donald O.

    2011-01-01

    The growth of crystals has been of interest to physicists and engineers for a long time because of their unique properties. Single crystals are utilized in such diverse applications as pharmaceuticals, computers, infrared detectors, frequency measurements, piezoelectric devices, a variety of high technology devices and sensors. Solution crystal growth is one of the important techniques to grow a variety of crystals when the material decomposes at the melting point and a suitable solvent is available to make a saturated solution at a desired temperature. In this chapter an attempt is made to give some fundamentals of growing crystals from solution including improved designs of various crystallizers. Since the same solution crystal growth technique could not be used in microgravity, authors had proposed a new cooled sting technique to grow crystals in space. Authors? experiences of conducting two space shuttle experiments relating to solution crystal growth are also detailed in this work. The complexity of these solution growth experiments to grow crystals in space are discussed. These happen to be some of the early experiments performed in space, and various lessons learned are described. A brief discussion of protein crystal growth that also shares basic principles of solution growth technique is given along with some flight hardware information for its growth in microgravity.

  9. Adsorption of Geosmin and MIB on Activated Carbon Fibers-Single and Binary Solute System

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, Rangesh; Sorial, George A., E-mail: george.sorial@uc.ed [University of Cincinnati, Department of Civil and Environmental Engineering (United States)

    2009-08-15

    The adsorption of two taste- and odor-causing compounds, namely MIB (2-methyl isoborneol-C{sub 11}H{sub 20}O) and geosmin (C{sub 12}H{sub 22}O) on activated carbon was investigated in this study. The impact of adsorbent pore size distribution on adsorption of MIB and geosmin was evaluated through single solute and multicomponent adsorption of these compounds on three types of activated carbon fibers (ACFs) and one granular activated carbon (GAC). The ACFs (ACC-15, ACC-20, and ACC-25) with different degrees of activation had narrow pore size distributions and specific critical pore diameters whereas the GAC (F-400) had a wider pore size distribution and lesser microporosity. The effect of the presence of natural organic matter (NOM) on MIB and geosmin adsorption was also studied for both the single solute and binary systems. The Myers equation was used to evaluate the single solute isotherms as it converges to Henry's law at low coverage and also serves as an input for predicting multicomponent adsorption. The single solute adsorption isotherms fit the Myers equation well and pore size distribution significantly influenced adsorption on the ACFs and GAC. The ideal adsorbed solute theory (IAST), which is a well-established thermodynamic model for multicomponent adsorption, was used to predict the binary adsorption of MIB and geosmin. The IAST predicted well the binary adsorption on the ACFs and GAC. Binary adsorption isotherms were also conducted in the presence of oxygen (oxic) and absence of oxygen (anoxic). There were no significant differences in the binary isotherm between the oxic and anoxic conditions, indicating that adsorption was purely through physical adsorption and no oligomerization was taking place. Binary adsorptions for the four adsorbents were also conducted in the presence of humic acid to determine the effect of NOM and to compare with IAST predictions. The presence of NOM interestingly resulted in deviation from IAST behavior in case of two

  10. The single-sink fixed-charge transportation problem: Applications and solution methods

    DEFF Research Database (Denmark)

    Goertz, Simon; Klose, Andreas

    2007-01-01

    The single-sink fixed-charge transportation problem (SSFCTP) consists in finding a minimum cost flow from a number of supplier nodes to a single demand node. Shipping costs comprise costs proportional to the amount shipped as well as a fixed-charge. Although the SSFCTP is an important special case...... of the well-known fixed-charge transportation problem, just a few methods for solving this problem have been proposed in the literature. After summarising some applications of this problem arising in manufacturing and transportation, we give an overview on approximation algorithms and worst-case results....... Finally, we briefly compare some exact solution algorithms for this problem....

  11. Classification of All Single Travelling Wave Solutions to Calogero-Degasperis-Focas Equation

    International Nuclear Information System (INIS)

    Liu Chengshi

    2007-01-01

    Under the travelling wave transformation, Calogero-Degasperis-Focas equation is reduced to an ordinary differential equation. Using a symmetry group of one parameter, this ODE is reduced to a second-order linear inhomogeneous ODE. Furthermore, we apply the change of the variable and complete discrimination system for polynomial to solve the corresponding integrals and obtained the classification of all single travelling wave solutions to Calogero-Degasperis-Focas equation.

  12. Pseudospectral operational matrix for numerical solution of single and multiterm time fractional diffusion equation

    OpenAIRE

    GHOLAMI, SAEID; BABOLIAN, ESMAIL; JAVIDI, MOHAMMAD

    2016-01-01

    This paper presents a new numerical approach to solve single and multiterm time fractional diffusion equations. In this work, the space dimension is discretized to the Gauss$-$Lobatto points. We use the normalized Grunwald approximation for the time dimension and a pseudospectral successive integration matrix for the space dimension. This approach shows that with fewer numbers of points, we can approximate the solution with more accuracy. Some examples with numerical results in tables and fig...

  13. Anisotropic surface hole-transport property of triphenylamine-derivative single crystal prepared by solution method

    Energy Technology Data Exchange (ETDEWEB)

    Umeda, Minoru, E-mail: mumeda@vos.nagaokaut.ac.jp [Nagaoka University of Technology, Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Katagiri, Mitsuhiko; Shironita, Sayoko [Nagaoka University of Technology, Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Nagayama, Norio [Nagaoka University of Technology, Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Ricoh Company, Ltd., Nishisawada, Numazu, Shizuoka 410-0007 (Japan)

    2016-12-01

    Highlights: • A hole transport molecule was investigated based on its electrochemical redox characteristics. • The solubility and supersolubility curves of the molecule were measured in order to prepare a large crystal. • The polarization micrograph and XRD results revealed that a single crystal was obtained. • An anisotropic surface conduction, in which the long-axis direction exceeds that of the amorphous layer, was observed. • The anisotropic surface conduction was well explained by the molecular stacked structure. - Abstract: This paper reports the anisotropic hole transport at the triphenylamine-derivative single crystal surface prepared by a solution method. Triphenylamine derivatives are commonly used in a hole-transport material for organic photoconductors of laser-beam printers, in which the materials are used as an amorphous form. For developing organic photovoltaics using the photoconductor’s technology, preparation of a single crystal seems to be a specific way by realizing the high mobility of an organic semiconductor. In this study, a single crystal of 4-(2,2-diphenylethenyl)-N,N-bis(4-methylphenyl)-benzenamine (TPA) was prepared and its anisotropic hole-transport property measured. First, the hole-transport property of the TPA was investigated based on its chemical structure and electrochemical redox characteristics. Next, a large-scale single crystal formation at a high rate was developed by employing a solution method based on its solubility and supersolubility curves. The grown TPA was found to be a single crystal based on the polarization micrograph observation and crystallographic analysis. For the TPA single crystal, an anisotropic surface conduction was found, which was well explained by its molecular stack structure. The measured current in the long-axis direction is one order of magnitude greater than that of amorphous TPA.

  14. A closed-form analytical solution for thermal single-well injection-withdrawal tests

    Science.gov (United States)

    Jung, Yoojin; Pruess, Karsten

    2012-03-01

    Thermal single-well injection-withdrawal (SWIW) tests entail pumping cold water into a hot and usually fractured reservoir, and monitoring the temperature recovery during subsequent backflow. Such tests have been proposed as a potential means to characterize properties of enhanced geothermal systems (EGS), such as fracture spacing, connectivity, and porosity. In this paper we develop an analytical solution for thermal SWIW tests, using an idealized model of a single vertical fracture with linear flow geometry embedded in impermeable conductive wall rocks. The analytical solution shows that the time dependence of temperature recovery is dominated by the heat exchange between fracture and matrix rock, but strong thermal diffusivities of rocks as compared to typical solute diffusivities are not necessarily advantageous for characterizing fracture-matrix interactions. The effect of fracture aperture on temperature recovery during backflow is weak, particularly when the fracture aperture is smaller than 0.1 cm. The solution also shows that temperature recovery during backflow is independent of the applied injection and backflow rates. This surprising result implies that temperature recovery is independent of the height of the fracture, or the specific fracture-matrix interface areas per unit fracture length, suggesting that thermal SWIW tests will not be able to characterize fracture growth that may be achieved by stimulation treatments.

  15. Effect of Saline Solution on the Electrical Response of Single Wall Carbon Nanotubes-Epoxy Nanocomposites

    Directory of Open Access Journals (Sweden)

    Hammad Younes

    2017-01-01

    Full Text Available The effects of saline solution on the electrical resistance of single wall carbon nanotubes-epoxy nanocomposites have been investigated experimentally. Ultrasonic assisted fabricated 1.0% and 0.5 W/W% SWCNTs epoxy nanocomposites are integrated into a Kelvin structure by smear cast the nanocomposites on a glass wafer. Four metal pads are deposited on the nanocomposites using the beam evaporator and wires are tethered using soldering. The effect of saline solution on the electrical resistance of the nanocomposites is studied by adding drop of saline solution to the surface of the fabricated nanocomposites and measuring electrical resistance. Moreover, the nanocomposites are soaked completely into 3 wt.% saline solution and real-time measurement of the electrical resistance is conducted. It is found that a drop of saline solution on the surface of the nanocomposites film increases the resistance by 50%. Furthermore, the real-time measurement reveals a 40% increase in the resistance of the nanocomposites film. More importantly, the nanocomposites are successfully reset by soaking in DI water for four hours. This study may open the door for using SWCNTs epoxy nanocomposites as scale sensors in oil and gas industry.

  16. Decolorisation of Reactive Red 120 Dye by Using Single-Walled Carbon Nanotubes in Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Edris Bazrafshan

    2013-01-01

    Full Text Available Dyes are one of the most hazardous chemical compound classes found in industrial effluents and need to be treated since their presence in water bodies reduces light penetration, precluding the photosynthesis of aqueous flora. In the present study, single-walled carbon nanotubes (SWCNTs was used as an adsorbent for the successful removal of Reactive Red 120 (RR-120 textile dye from aqueous solutions. The effect of various operating parameters such as initial concentration of dye, contact time, adsorbent dosage and initial pH was investigated in order to find the optimum adsorption conditions. Equilibrium isotherms were used to identify the possible mechanism of the adsorption process. The optimum pH for removing of RR-120 dye from aqueous solutions was found to be 5 and for this condition maximum predicted adsorption capacity for RR-120 dye was obtained as 426.49 mg/g. Also, the equilibrium data were also fitted to the Langmuir, Freundlich and BET equilibrium isotherm models. It was found that the data fitted to BET (R2=0.9897 better than Langmuir (R2=0.9190 and Freundlich (R2=0.8819 model. Finally it was concluded that the single-walled carbon nanotubes can be used for dye removal from aqueous solutions.

  17. Solution-grown organic single-crystalline donor-acceptor heterojunctions for photovoltaics.

    Science.gov (United States)

    Li, Hanying; Fan, Congcheng; Fu, Weifei; Xin, Huolin L; Chen, Hongzheng

    2015-01-12

    Organic single crystals are ideal candidates for high-performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single-crystalline heterojunctions with a consistent donor-top and acceptor-bottom structure throughout the substrate can be simply obtained from a mixed solution of C60 (acceptor) and 3,6-bis(5-(4-n-butylphenyl)thiophene-2-yl)-2,5-bis(2-ethylhexyl)pyrrolo[3,4-c]pyrrole-1,4-dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.255±0.095)% under 1 sun, which is significantly higher than the previously reported value for a vapor-grown organic single-crystalline donor-acceptor heterojunction (0.007%). As such, this work opens a practical avenue for the study of organic photovoltaics based on single crystals. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Bridge flap technique as a single-step solution to mucogingival problems: A case series

    Directory of Open Access Journals (Sweden)

    Vivek Gupta

    2011-01-01

    Full Text Available Shallow vestibule, gingival recession, inadequate width of attached gingiva (AG and aberrant frenum pull are an array of mucogingival problems for which several independent and effective surgical solutions are reported in the literature. This case series reports the effectiveness of the bridge flap technique as a single-step surgical entity for increasing the depth of the vestibule, root coverage, increasing the width of the AG and solving the problem of abnormal frenum pull. Eight patients with 18 teeth altogether having Millers class I, II or III recession along with problems of shallow vestibule, inadequate width of AG and with or without frenum pull underwent this surgical procedure and were followed-up till 9 months post-operatively. The mean root coverage obtained was 55% and the mean average gain in width of the AG was 3.5 mm. The mean percentage gain in clinical attachment level was 41%. The bridge flap technique can be an effective single-step solution for the aforementioned mucogingival problems if present simultaneously in any case, and offers considerable advantages over other mucogingival surgical techniques in terms of simplicity, limited chair-time for the patient and the operator, single surgical intervention for manifold mucogingival problems and low morbidity because of the absence of palatal donor tissue.

  19. Monitoring single membrane protein dynamics in a liposome manipulated in solution by the ABELtrap

    Science.gov (United States)

    Rendler, T.; Renz, M.; Hammann, E.; Ernst, S.; Zarrabi, N.; Börsch, M.

    2011-02-01

    FoF1-ATP synthase is the essential membrane enzyme maintaining the cellular level of adenosine triphosphate (ATP) and comprises two rotary motors. We measure subunit rotation in FoF1-ATP synthase by intramolecular Foerster resonance energy transfer (FRET) between two fluorophores at the rotor and at the stator of the enzyme. Confocal FRET measurements of freely diffusing single enzymes in lipid vesicles are limited to hundreds of milliseconds by the transit times through the laser focus. We evaluate two different methods to trap the enzyme inside the confocal volume in order to extend the observation times. Monte Carlo simulations show that optical tweezers with low laser power are not suitable for lipid vesicles with a diameter of 130 nm. A. E. Cohen (Harvard) and W. E. Moerner (Stanford) have recently developed an Anti-Brownian electrokinetic trap (ABELtrap) which is capable to apparently immobilize single molecules, proteins, viruses or vesicles in solution. Trapping of fluorescent particles is achieved by applying a real time, position-dependent feedback to four electrodes in a microfluidic device. The standard deviation from a given target position in the ABELtrap is smaller than 200 nm. We develop a combination of the ABELtrap with confocal FRET measurements to monitor single membrane enzyme dynamics by FRET for more than 10 seconds in solution.

  20. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

    KAUST Repository

    Diao, Ying

    2013-06-02

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach - termed fluid-enhanced crystal engineering (FLUENCE) - that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V-1 s -1 and 11 cm2 V-1 s-1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics. © 2013 Macmillan Publishers Limited. All rights reserved.

  1. Direct Uniaxial Alignment of a Donor-Acceptor Semiconducting Polymer Using Single-Step Solution Shearing.

    Science.gov (United States)

    Shaw, Leo; Hayoz, Pascal; Diao, Ying; Reinspach, Julia Antonia; To, John W F; Toney, Michael F; Weitz, R Thomas; Bao, Zhenan

    2016-04-13

    The alignment of organic semiconductors (OSCs) in the active layers of electronic devices can confer desirable properties, such as enhanced charge transport properties due to better ordering, charge transport anisotropy for reduced device cross-talk, and polarized light emission or absorption. The solution-based deposition of highly aligned small molecule OSCs has been widely demonstrated, but the alignment of polymeric OSCs in thin films deposited directly from solution has typically required surface templating or complex pre- or postdeposition processing. Therefore, single-step solution processing and the charge transport enhancement afforded by alignment continue to be attractive. We report here the use of solution shearing to tune the degree of alignment in poly(diketopyrrolopyrrole-terthiophene) thin films by controlling the coating speed. A maximum dichroic ratio of ∼7 was achieved on unpatterned substrates without any additional pre- or postdeposition processing. The degree of polymer alignment was found to be a competition between the shear alignment of polymer chains in solution and the complex thin film drying process. Contrary to previous reports, no charge transport anisotropy was observed because of the small crystallite size relative to the channel length, a meshlike morphology, and the likelihood of increased grain boundaries in the direction transverse to coating. In fact, the lack of aligned morphological structures, coupled with observed anisotropy in X-ray diffraction data, suggests the alignment of polymer molecules in both the crystalline and the amorphous regions of the films. The shear speed at which maximum dichroism is achieved can be controlled by altering deposition parameters such as temperature and substrate treatment. Modest changes in molecular weight showed negligible effects on alignment, while longer polymer alkyl side chains were found to reduce the degree of alignment. This work demonstrates that solution shearing can be used

  2. Chemical properties of astatine positive single-charged ion in aqueous solutions

    International Nuclear Information System (INIS)

    Milanov, M.; Doberents, V.; Khalkin, V.A.; Marinov, A.

    1983-01-01

    The mobility of the oxidized astatine in solutions H(Na)ClO 4 (μ=0.4 M) - 1x10 -4 M K 2 Cr 2 O 7 has been measured at 25 deg C in the interval 0.63 -4 cm 2 V -1 s -1 , pH 0.63 Usub(c)=2.67x10 -4 cm 2 V -1 s -1 . The effect agrees with the opinion that a single-charged cation of astatine formed in acidic solutions is a strong aquacomplex ((Hsub(2)O)sub(x)At)sup(+) (x=1-2) (protonized hypoastatine acid). Deprotonization constant of this cation is Ksub(dp)=0.032+-0.005. Specific properties of the astatine cation are given. They can be explained, probability, through the peculiarities of its structure

  3. Gradient-tailored excitation for single-quantum NMR spectroscopy of aqueous solutions.

    Science.gov (United States)

    Piotto, M; Saudek, V; Sklenár, V

    1992-11-01

    A novel approach to tailored selective excitation for the measurement of NMR spectra in non-deuterated aqueous solutions (WATERGATE, WATER suppression by GrAdient-Tailored Excitation) is described. The gradient echo sequence, which effectively combines one selective 180 degrees radiofrequency pulse and two field gradient pulses, achieves highly selective and effective water suppression. This technique is ideally suited for the rapid collection of multi-dimensional data since a single-scan acquisition produces a pure phase NMR spectrum with a perfectly flat baseline, at the highest possible sensitivity. Application to the fast measurement of 2D NOE data of a 2.2 mM solution of a double-stranded DNA fragment in 90% H2O at 5 degrees C is presented.

  4. THERMODYNAMIC PROPERTIES OF NONAQUEOUS SINGLE SALT SOLUTIONS USING THE Q-ELECTROLATTICE EQUATION OF STATE

    Directory of Open Access Journals (Sweden)

    A. Zuber

    2015-09-01

    Full Text Available AbstractThe correlation of thermodynamic properties of nonaqueous electrolyte solutions is relevant to design and operation of many chemical processes, as in fertilizer production and the pharmaceutical industry. In this work, the Q-electrolattice equation of state (EOS is used to model vapor pressure, mean ionic activity coefficient, osmotic coefficient, and liquid density of sixteen methanol and ten ethanol solutions containing single strong 1:1 and 2:1 salts. The Q-electrolattice comprises the lattice-based Mattedi-Tavares-Castier (MTC EOS, the Born term and the explicit MSA term. The model requires two adjustable parameters per ion, namely the ionic diameter and the solvent-ion interaction energy. Predictions of osmotic coefficient at 298.15 K and liquid density at different temperatures are also presented.

  5. Single-Chain Conformation for Interacting Poly(N-isopropylacrylamide in Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Boualem Hammouda

    2015-04-01

    Full Text Available The demixing phase behavior of Poly(N-isopropylacrylamide (PNIPAM aqueous solution is investigated using small-angle neutron scattering. This polymer phase separates upon heating and demixes around 32 °C. The pre-transition temperature range is characterized by two scattering modes; a low-Q (large-scale signal and a high-Q dissolved chains signal. In order to get insight into this pre-transition region, especially the origin of the low-Q (large-scale structure, the zero average contrast method is used in order to isolate single-chain conformations even in the demixing polymers transition region. This method consists of measuring deuterated and non-deuterated polymers dissolved in mixtures of deuterated and non-deuterated water for which the polymer scattering length density matches the solvent scattering length density. A fixed 4% polymer mass fraction is used in a contrast variation series where the d-water/h-water fraction is varied in order to determine the match point. The zero average contrast (match point sample displays pure single-chain scattering with no interchain contributions. Our measurements prove that the large scale structure in this polymer solution is due to a transient polymer network formed through hydrophobic segment-segment interactions. Scattering intensity increases when the temperature gets close to the phase boundary. While the apparent radius of gyration increases substantially at the Lower Critical Solution Temperature (LCST transition due to strong interchain correlation, the single-chain true radius of gyration has been found to decrease slightly with temperature when approaching the transition.

  6. A sign on a tree: A case for 'public knowledge'

    OpenAIRE

    Ma, Lai

    2015-01-01

    Can information be objective and/or subjective? Based on Patrick Wilson’s notion of public knowledge and a story of a sign on a tree, this paper argues that private information is not the same as subjective information, and that the very communicative process of making information makes information objective. It also argues that the objective sense of information—public knowledge—has been and will be most relevant to information science, hence questions concerning collective responsibility in...

  7. Robust Discrimination between Single Gold Nanoparticles and Their Dimers in Aqueous Solution for Ultrasensitive Homogeneous Bioassays

    Directory of Open Access Journals (Sweden)

    Jun Kobayashi

    2015-01-01

    Full Text Available We propose a robust method to distinguish isolated single gold nanoparticles (AuNP monomers and their dimers under Brownian motion, a key for ultrasensitive homogeneous bioassays, including AuNP sandwich assays. To detect dimers and distinguish them from a larger number of monomers in aqueous solution, single-particle polarization microscopy was performed. For the accurate detection of individual particles, the optical anisotropy and rotational diffusion time are measured because a dimer is much more anisotropic than the nearly spherical monomer and the rotational diffusion time of a dimer is four times that of a monomer. By employing an autocorrelation analysis, we defined a measure of distinguishing that simultaneously enables high detection probability and low error probability. The detection platform offers homogeneous DNA hybridization assays and immunoassays at the subpicomolar level.

  8. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals

    KAUST Repository

    Niazi, Muhammad Rizwan

    2015-11-23

    Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic single-crystal devices, but these suffer from scale-up challenges. Here we present a new method based on blade coating of a blend of conjugated small molecules and amorphous insulating polymers to produce OTFTs with consistently excellent performance characteristics (carrier mobility as high as 6.7 cm2 V−1 s−1, low threshold voltages of<1 V and low subthreshold swings <0.5 V dec−1). Our findings demonstrate that careful control over phase separation and crystallization can yield solution-printed polycrystalline organic semiconductor films with transport properties and other figures of merit on par with their single-crystal counterparts.

  9. Adsorptive removal of acid blue 113 and tartrazine by fly ash from single and binary dye solutions

    Energy Technology Data Exchange (ETDEWEB)

    Pura, S.; Atun, G. [Istanbul University, Avcilar (Turkey). Dept. of Chemistry

    2009-07-01

    Adsorption of two acid dyestuffs, acid blue 113 (AB) and tartrazine (TA), has been studied from their single and binary solutions by using fly ash (FA) as an adsorbent. The S shaped isotherms observed for dye adsorption from single solutions show that both acid dyes are not preferred at a low concentration region whereas adsorption of the dyes from binary solutions is enhanced via solute-solute interactions. Although the L-shaped isotherm is observed in binary solutions adsorbability of AB decreases in concentrated solutions with respect to single one, time dependency of adsorption is well described with a pseudo-second-order kinetic model as well as the linear relation of Bt vs. t plots (not passing through origin) indicates that film diffusion is effective on dye adsorption. Modeled isotherm curves using isotherm parameters of the Freundlich and Dubinin-Radushkevich (D-R) equations adequately fit to experimental equilibrium data. Equilibrium adsorption of AB in binary solutions has been quite well predicted by the extended Freundlich and the Sheindorf-Rebuhn-Sheintuch (SRS) models. In general, the isotherm curves constructed in the temperature range of 298-328K show that the optimum temperature is 318K for AB removal from both single and binary solutions.

  10. Solution-processed single-wall carbon nanotube transistor arrays for wearable display backplanes

    Directory of Open Access Journals (Sweden)

    Byeong-Cheol Kang

    2018-01-01

    Full Text Available In this paper, we demonstrate solution-processed single-wall carbon nanotube thin-film transistor (SWCNT-TFT arrays with polymeric gate dielectrics on the polymeric substrates for wearable display backplanes, which can be directly attached to the human body. The optimized SWCNT-TFTs without any buffer layer on flexible substrates exhibit a linear field-effect mobility of 1.5cm2/V-s and a threshold voltage of around 0V. The statistical plot of the key device metrics extracted from 35 SWCNT-TFTs which were fabricated in different batches at different times conclusively support that we successfully demonstrated high-performance solution-processed SWCNT-TFT arrays which demand excellent uniformity in the device performance. We also investigate the operational stability of wearable SWCNT-TFT arrays against an applied strain of up to 40%, which is the essential for a harsh degree of strain on human body. We believe that the demonstration of flexible SWCNT-TFT arrays which were fabricated by all solution-process except the deposition of metal electrodes at process temperature below 130oC can open up new routes for wearable display backplanes.

  11. Solution-processed single-wall carbon nanotube transistor arrays for wearable display backplanes

    Science.gov (United States)

    Kang, Byeong-Cheol; Ha, Tae-Jun

    2018-01-01

    In this paper, we demonstrate solution-processed single-wall carbon nanotube thin-film transistor (SWCNT-TFT) arrays with polymeric gate dielectrics on the polymeric substrates for wearable display backplanes, which can be directly attached to the human body. The optimized SWCNT-TFTs without any buffer layer on flexible substrates exhibit a linear field-effect mobility of 1.5cm2/V-s and a threshold voltage of around 0V. The statistical plot of the key device metrics extracted from 35 SWCNT-TFTs which were fabricated in different batches at different times conclusively support that we successfully demonstrated high-performance solution-processed SWCNT-TFT arrays which demand excellent uniformity in the device performance. We also investigate the operational stability of wearable SWCNT-TFT arrays against an applied strain of up to 40%, which is the essential for a harsh degree of strain on human body. We believe that the demonstration of flexible SWCNT-TFT arrays which were fabricated by all solution-process except the deposition of metal electrodes at process temperature below 130oC can open up new routes for wearable display backplanes.

  12. Phase transitions of single polymer chains and of polymer solutions: insights from Monte Carlo simulations

    International Nuclear Information System (INIS)

    Binder, K; Paul, W; Strauch, T; Rampf, F; Ivanov, V; Luettmer-Strathmann, J

    2008-01-01

    The statistical mechanics of flexible and semiflexible macromolecules is distinct from that of small molecule systems, since the thermodynamic limit can also be approached when the number of (effective) monomers of a single chain (realizable by a polymer solution in the dilute limit) is approaching infinity. One can introduce effective attractive interactions into a simulation model for a single chain such that a swollen coil contracts when the temperature is reduced, until excluded volume interactions are effectively canceled by attractive forces, and the chain conformation becomes almost Gaussian at the theta point. This state corresponds to a tricritical point, as the renormalization group theory shows. Below the theta temperature a fluid globule is predicted (at nonzero concentration then phase separation between dilute and semidilute solutions occurs), while at still lower temperature a transition to a solid phase (crystal or glass) occurs. Monte Carlo simulations have shown, however, that the fluid globule phase may become suppressed, when the range of the effective attractive forces becomes too short, with the result that a direct (ultimately first-order) transition from the swollen coil to the solid occurs. This behavior is analogous to the behavior of colloidal particles with a very short range of attractive forces, where liquid-vapor-type phase separation may be suppressed. Analogous first-order transitions from swollen coils to dense rodlike or toroidal structures occur for semiflexible polymers. Finally, the modifications of the behavior discussed when the polymers are adsorbed at surfaces are also mentioned, and possible relations to wetting behavior of polymer solutions are addressed.

  13. Human serum albumin adsorption on TiO2 from single protein solutions and from plasma.

    Science.gov (United States)

    Sousa, S R; Moradas-Ferreira, P; Saramago, B; Melo, L Viseu; Barbosa, M A

    2004-10-26

    In the present work, the adsorption of human serum albumin (HSA) on commercially pure titanium with a titanium oxide layer formed in a H(2)O(2) solution (TiO(2) cp) and on TiO(2) sputtered on Si (TiO(2) sp) was analyzed. Adsorption isotherms, kinetic studies, and work of adhesion determinations were carried out. HSA exchangeability was also evaluated. Surface characterization was performed by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and wettability studies. The two TiO(2) surfaces have very distinct roughnesses, the TiO(2) sp having a mean R(a) value 14 times smaller than the one of TiO(2) cp. XPS analysis revealed consistent peaks representative of TiO(2) on sputtered samples as well as on Ti cp substrate after 48 h of H(2)O(2) immersion. Nitrogen was observed as soon as protein was present, while sulfur, present in disulfide bonds in HSA, was observed for concentrations of protein higher than 0.30 mg/mL. The work of adhesion was determined from contact angle measurements. As expected from the surface free energy values, the work of adhesion of HSA solution is higher for the TiO(2) cp substrate, the more hydrophilic one, and lower for the TiO(2) sp substrate, the more hydrophobic one. The work of adhesion between plasma and the substrates assumed even higher values for the TiO(2) cp surface, indicating a greater interaction between the surface and the complex protein solutions. Adsorption studies by radiolabeling of albumin ((125)I-HSA) suggest that rapid HSA adsorption takes place on both surfaces, reaching a maximum value after approximately 60 min of incubation. For the higher HSA concentrations in solution, a multilayer coverage was observed on both substrates. After the adsorption step from single HSA solutions, the exchangeability of adsorbed HSA molecules by HSA in solution was evaluated. The HSA molecules adsorbed on TiO(2) sp seem to be more easily exchanged by HSA itself than those adsorbed on TiO(2) cp after 24 h. In

  14. Real-time monitoring and manipulation of single bio-molecules in free solution

    Energy Technology Data Exchange (ETDEWEB)

    Li, Hung-Wing [Iowa State Univ., Ames, IA (United States)

    2005-01-01

    The observation and manipulation of single biomolecules allow their dynamic behaviors to be studied to provide insight into molecular genetics, biochip assembly, biosensor design, DNA biophysics. In a PDMS/glass microchannel, a nonuniform electroosmotic flow (EOF) was created. By using a scanning confocal fluorescence microscope and total internal-reflection fluorescence microscope (TIRFM), we demonstrated that negatively charged DNA molecules were focused by the nonuniform EOF into a thin layer at the glass surface. This phenomenon was applied to selectively detect target DNA molecules without requiring the separation of excessive probes and can be applied continuously to achieve high throughput. A variable-angle-TIRFM was constructed for imaging single DNA molecule dynamics at a solid/liquid interface. Implications we have are that the measured intensities cannot be used directly to determine the distances of molecules from the surface and the experimental counting results depict the distance-dependent dynamics of molecules near the surface; Molecules at low ionic strengths experience electrostatic repulsion at distances much further away from the surface than the calculated thickness of the electrical double layer. {delta}-DNA was employed as a nanoprobe for different functionalized surfaces to elucidate adsorption in chromatography. The 12-base unpaired ends of this DNA provide exposed purine and pyrimidine groups for adsorption. Patterns of self-assembled monolayers (SAMs) and patterns of metal oxides are generated. By recording the real-time dynamic motion of DNA molecules at the SAMs/aqueous interface, the various parameters governing the retention of an analyte during chromatographic separation can be studied. Even subtle differences among adsorptive forces can be revealed. Dynamic conformational changes of the prosthetic group, flavin adenine dinucleotide (FAD), in flavoprotein NADH peroxidase, in thioredoxin reductase, and in free solution were monitored

  15. Reduction in the ionospheric error for a single-frequency GPS timing solution using tomography

    Directory of Open Access Journals (Sweden)

    Cathryn N. Mitchell

    2009-06-01

    Full Text Available

    Abstract

    Single-frequency Global Positioning System (GPS receivers do not accurately compensate for the ionospheric delay imposed upon a GPS signal. They rely upon models to compensate for the ionosphere. This delay compensation can be improved by measuring it directly with a dual-frequency receiver, or by monitoring the ionosphere using real-time maps. This investigation uses a 4D tomographic algorithm, Multi Instrument Data Analysis System (MIDAS, to correct for the ionospheric delay and compares the results to existing single and dualfrequency techniques. Maps of the ionospheric electron density, across Europe, are produced by using data collected from a fixed network of dual-frequency GPS receivers. Single-frequency pseudorange observations are corrected by using the maps to find the excess propagation delay on the GPS L1 signals. Days during the solar maximum year 2002 and the October 2003 storm have been chosen to display results when the ionospheric delays are large and variable. Results that improve upon the use of existing ionospheric models are achieved by applying MIDAS to fixed and mobile single-frequency GPS timing solutions. The approach offers the potential for corrections to be broadcast over a local region, or provided via the internet and allows timing accuracies to within 10 ns to be achieved.



  16. Energetics analysis of interstitial loops in single-phase concentrated solid-solution alloys

    Science.gov (United States)

    Wang, Xin-Xin; Niu, Liang-Liang; Wang, Shaoqing

    2018-04-01

    Systematic energetics analysis on the shape preference, relative stability and radiation-induced segregation of interstitial loops in nickel-containing single-phase concentrated solid-solution alloys have been conducted using atomistic simulations. It is shown that the perfect loops prefer rhombus shape for its low potential energy, while the Frank faulted loops favor ellipse for its low potential energy and the possible large configurational entropy. The decrease of stacking fault energy with increasing compositional complexity provides the energetic driving force for the formation of faulted loops, which, in conjunction with the kinetic factors, explains the experimental observation that the fraction of faulted loops rises with increasing compositional complexity. Notably, the kinetics is primarily responsible for the absence of faulted loops in nickel-cobalt with a very low stacking fault energy. We further demonstrate that the simultaneous nickel enrichment and iron/chromium depletion on interstitial loops can be fully accounted for by their energetics.

  17. Solution-phase synthesis of chromium-functionalized single-walled carbon nanotubes

    KAUST Repository

    Kalinina, Irina V.

    2015-03-01

    The solution phase reactions of single-walled carbon nanotubes (SWNTs) with Cr(CO)6 and benzene-Cr(CO)3 can lead to the formation of small chromium clusters. The cluster size can be varied from less than 1 nm to about 4 nm by increasing the reaction time. TEM images suggest that the clusters are deposited predominantly on the exterior walls of the nanotubes. TGA analysis was used to obtain the Cr content and carbon to chromium ratio in the Cr-complexed SWNTs. It is suggested that the carbon nanotube benzenoid structure templates the condensation of chromium atoms and facilitates the loss of carbon monoxide leading to well defined metal clusters.

  18. Solidification of a binary alloy: Finite-element, single-domain simulation and new benchmark solutions

    Science.gov (United States)

    Le Bars, Michael; Worster, M. Grae

    2006-07-01

    A finite-element simulation of binary alloy solidification based on a single-domain formulation is presented and tested. Resolution of phase change is first checked by comparison with the analytical results of Worster [M.G. Worster, Solidification of an alloy from a cooled boundary, J. Fluid Mech. 167 (1986) 481-501] for purely diffusive solidification. Fluid dynamical processes without phase change are then tested by comparison with previous numerical studies of thermal convection in a pure fluid [G. de Vahl Davis, Natural convection of air in a square cavity: a bench mark numerical solution, Int. J. Numer. Meth. Fluids 3 (1983) 249-264; D.A. Mayne, A.S. Usmani, M. Crapper, h-adaptive finite element solution of high Rayleigh number thermally driven cavity problem, Int. J. Numer. Meth. Heat Fluid Flow 10 (2000) 598-615; D.C. Wan, B.S.V. Patnaik, G.W. Wei, A new benchmark quality solution for the buoyancy driven cavity by discrete singular convolution, Numer. Heat Transf. 40 (2001) 199-228], in a porous medium with a constant porosity [G. Lauriat, V. Prasad, Non-darcian effects on natural convection in a vertical porous enclosure, Int. J. Heat Mass Transf. 32 (1989) 2135-2148; P. Nithiarasu, K.N. Seetharamu, T. Sundararajan, Natural convective heat transfer in an enclosure filled with fluid saturated variable porosity medium, Int. J. Heat Mass Transf. 40 (1997) 3955-3967] and in a mixed liquid-porous medium with a spatially variable porosity [P. Nithiarasu, K.N. Seetharamu, T. Sundararajan, Natural convective heat transfer in an enclosure filled with fluid saturated variable porosity medium, Int. J. Heat Mass Transf. 40 (1997) 3955-3967; N. Zabaras, D. Samanta, A stabilized volume-averaging finite element method for flow in porous media and binary alloy solidification processes, Int. J. Numer. Meth. Eng. 60 (2004) 1103-1138]. Finally, new benchmark solutions for simultaneous flow through both fluid and porous domains and for convective solidification processes are

  19. Solution-processed zinc oxide nanoparticles/single-walled carbon nanotubes hybrid thin-film transistors

    Science.gov (United States)

    Liu, Fangmei; Sun, Jia; Qian, Chuan; Hu, Xiaotao; Wu, Han; Huang, Yulan; Yang, Junliang

    2016-09-01

    Solution-processed thin-film transistors (TFTs) are the essential building blocks for manufacturing the low-cost and large-area consumptive electronics. Herein, solution-processed TFTs based on the composites of zinc oxide (ZnO) nanoparticles and single-walled carbon nanotubes (SWCNTs) were fabricated by the methods of spin-coating and doctor-blading. Through controlling the weight of SWCNTs, the ZnO/SWCNTs TFTs fabricated by spin-coating demonstrated a field-effect mobility of 4.7 cm2/Vs and a low threshold voltage of 0.8 V, while the TFTs devices fabricated by doctor-blading technique showed reasonable electrical performance with a mobility of 0.22 cm2/Vs. Furthermore, the ion-gel was used as an efficient electrochemical gate dielectric because of its large electric double-layer capacitance. The operating voltage of all the TFTs devices is as low as 4.0 V. The research suggests that ZnO/SWCNTs TFTs have the potential applications in low-cost, large-area and flexible consumptive electronics, such as chemical-biological sensors and smart label.

  20. Multiscale Roughness Influencing on Transport Behavior of Passive Solute through a Single Self-affine Fracture

    Science.gov (United States)

    Dou, Z.

    2017-12-01

    In this study, the influence of multi-scale roughness on transport behavior of the passive solute through the self-affine fracture was investigated. The single self-affine fracture was constructed by the successive random additions (SRA) and the fracture roughness was decomposed into two different scales (i.e. large-scale primary roughness and small-scale secondary roughness) by the Wavelet analysis technique. The fluid flow in fractures, which was characterized by the Forchheimer's law, showed the non-linear flow behaviors such as eddies and tortuous streamlines. The results indicated that the small-scale secondary roughness was primarily responsible for the non-linear flow behaviors. The direct simulations of asymptotic passive solute transport represented the Non-Fickian transport characteristics (i.e. early arrivals and long tails) in breakthrough curves (BTCs) and residence time distributions (RTDs) with and without consideration of the secondary roughness. Analysis of multiscale BTCs and RTDs showed that the small-scale secondary roughness played a significant role in enhancing the Non-Fickian transport characteristics. We found that removing small-scale secondary roughness led to the lengthening arrival and shortening tail. The peak concentration in BTCs decreased as the secondary roughness was removed, implying that the secondary could also enhance the solute dilution. The estimated BTCs by the Fickian advection-dispersion equation (ADE) yielded errors which decreased with the small-scale secondary roughness being removed. The mobile-immobile model (MIM) was alternatively implemented to characterize the Non-Fickian transport. We found that the MIM was more capable of estimating Non-Fickian BTCs. The small-scale secondary roughness resulted in the decreasing mobile domain fraction and the increasing mass exchange rate between immobile and mobile domains. The estimated parameters from the MIM could provide insight into the inherent mechanism of roughness

  1. Third-order NLO properties of solution grown methyl- p-hydroxy benzoate single crystals

    Science.gov (United States)

    Manikandan, S.; Sabari Girisun, T. C.; Mohandoss, R.; Dhanuskodi, S.; Manivannan, S.

    2014-09-01

    The third-order nonlinear optical properties of solution-grown methyl- p-hydroxy benzoate (MHB) single crystals were studied by Z-scan technique using a He-Ne (632.8 nm, 30 mW) laser. From the closed aperture Z-scan data, the valley followed by peak on the normalized transmittance indicates the sign of the nonlinear refractive index is positive and shows a self focusing nature. From the open aperture Z-scan curve, it is found that the nonlinear absorption is due to saturation. The order of magnitude of third order susceptibility was estimated to be 10-6 esu. UV-Vis-NIR spectrum of MHB single crystal reveals a very low cutoff wavelength (310 nm) and transparency in the entire visible region. Also the material has direct allowed transition and it possesses a band gap of 3.7 eV. The dissipation factor is low and SHG efficiency is high. The higher magnitudes of second and third order NLO parameters make the material suitable for photonic applications like frequency conversion and eye/sensor protection.

  2. Generic Schemes for Single-Molecule Kinetics. 3: Self-Consistent Pathway Solutions for Nonrenewal Processes.

    Science.gov (United States)

    Piephoff, D Evan; Cao, Jianshu

    2018-04-23

    We recently developed a pathway analysis framework (paper 1) for describing single-molecule kinetics for renewal (i.e., memoryless) processes based on the decomposition of a kinetic scheme into generic structures. In our approach, waiting time distribution functions corresponding to such structures are expressed in terms of self-consistent pathway solutions and concatenated to form measurable probability distribution functions (PDFs), affording a simple way to decompose and recombine a network. Here, we extend this framework to nonrenewal processes, which involve correlations between events, and employ it to formulate waiting time PDFs, including the first-passage time PDF, for a general kinetic network model. Our technique does not require the assumption of Poissonian kinetics, permitting a more general kinetic description than the usual rate approach, with minimal topological restrictiveness. To demonstrate the usefulness of this technique, we provide explicit calculations for our general model, which we adapt to two generic schemes for single-enzyme turnover with conformational interconversion. For each generic scheme, wherein the intermediate state(s) need not undergo Poissonian decay, the functional dependence of the mean first-passage time on the concentration of an external substrate is analyzed. When conformational detailed balance is satisfied, the enzyme turnover rate (related to the mean first-passage time) reduces to the celebrated Michaelis-Menten functional form, consistent with our previous work involving a similar scheme with all rate processes, thereby establishing further generality to this intriguing result. Our framework affords a general and intuitive approach for evaluating measurable waiting time PDFs and their moments, making it a potentially useful kinetic tool for a wide variety of single-molecule processes.

  3. Growth of tourmaline single crystals containing transition metal elements in hydrothermal solutions

    Science.gov (United States)

    Setkova, Tatiana; Shapovalov, Yury; Balitsky, Vladimir

    2011-03-01

    Interest in the growth of tourmaline single crystals is based on the promising piezoelectric and pyroelectric properties of this material compared to quartz crystals currently in use. Moreover, synthetic tourmaline can be used as a substitute for the natural stone in the jewelry industry similar to other synthetic analogues of gemstones. Single crystals of colored Co-, Ni-, Fe-, (Ni,Cr)-, (Ni,Fe)-, and (Co,Ni,Cr)-containing tourmalines with concentration of transition metal elements up to 16 wt% on a seed have been grown from complex boron-containing hydrothermal solutions at a range of temperatures 400-750 °C and pressures 100 MPa. Experiments were conducted under conditions of a thermal gradient in titanium and chromium-nickel autoclaves. Tourmaline growth on a seed crystal occurs only if separate tourmaline-forming components (monocrystalline corundum and quartz bars) are used as charge. All tourmalines specified above grow in analogous (+) direction of the optical axis with a speed of 0.05 mm/day by faces of the trigonal pyramid, except tourmalines containing chromium. They grow in analogous (+0001) direction with a speed 0.05 mm/day, and in antilogous (-0001) direction with a speed of 0.01 mm/day by faces of the trigonal pyramid and in prism direction with a speed of 0.001 mm/day. Along with the large single crystals, a great amount of finest (30-150 μm in size) tourmaline crystals was formed during the runs by spontaneous nucleation both on the surface of the seed crystals and in the charge.

  4. Numerical solution of the relativistic single-site scattering problem for the Coulomb and the Mathieu potential

    Science.gov (United States)

    Geilhufe, Matthias; Achilles, Steven; Köbis, Markus Arthur; Arnold, Martin; Mertig, Ingrid; Hergert, Wolfram; Ernst, Arthur

    2015-11-01

    For a reliable fully-relativistic Korringa-Kohn-Rostoker Green function method, an accurate solution of the underlying single-site scattering problem is necessary. We present an extensive discussion on numerical solutions of the related differential equations by means of standard methods for a direct solution and by means of integral equations. Our implementation is tested and exemplarily demonstrated for a spherically symmetric treatment of a Coulomb potential and for a Mathieu potential to cover the full-potential implementation. For the Coulomb potential we include an analytic discussion of the asymptotic behaviour of irregular scattering solutions close to the origin (r\\ll 1 ).

  5. Do warning signs on electronic gaming machines influence irrational cognitions?

    Science.gov (United States)

    Monaghan, Sally; Blaszczynski, Alex; Nower, Lia

    2009-08-01

    Electronic gaming machines are popular among problem gamblers; in response, governments have introduced "responsible gaming" legislation incorporating the mandatory display of warning signs on or near electronic gaming machines. These signs are designed to correct irrational and erroneous beliefs through the provision of accurate information on probabilities of winning and the concept of randomness. There is minimal empirical data evaluating the effectiveness of such signs. In this study, 93 undergraduate students were randomly allocated to standard and informative messages displayed on an electronic gaming machine during play in a laboratory setting. Results revealed that a majority of participants incorrectly estimated gambling odds and reported irrational gambling-related cognitions prior to play. In addition, there were no significant between-group differences, and few participants recalled the content of messages or modified their gambling-related cognitions. Signs placed on electronic gaming machines may not modify irrational beliefs or alter gambling behaviour.

  6. Structural Architecture of Prothrombin in Solution Revealed by Single Molecule Spectroscopy.

    Science.gov (United States)

    Pozzi, Nicola; Bystranowska, Dominika; Zuo, Xiaobing; Di Cera, Enrico

    2016-08-26

    The coagulation factor prothrombin has a complex spatial organization of its modular assembly that comprises the N-terminal Gla domain, kringle-1, kringle-2, and the C-terminal protease domain connected by three intervening linkers. Here we use single molecule Förster resonance energy transfer to access the conformational landscape of prothrombin in solution and uncover structural features of functional significance that extend recent x-ray crystallographic analysis. Prothrombin exists in equilibrium between two alternative conformations, open and closed. The closed conformation predominates (70%) and features an unanticipated intramolecular collapse of Tyr(93) in kringle-1 onto Trp(547) in the protease domain that obliterates access to the active site and protects the zymogen from autoproteolytic conversion to thrombin. The open conformation (30%) is more susceptible to chymotrypsin digestion and autoactivation, and features a shape consistent with recent x-ray crystal structures. Small angle x-ray scattering measurements of prothrombin wild type stabilized 70% in the closed conformation and of the mutant Y93A stabilized 80% in the open conformation directly document two envelopes that differ 50 Å in length. These findings reveal important new details on the conformational plasticity of prothrombin in solution and the drastic structural difference between its alternative conformations. Prothrombin uses the intramolecular collapse of kringle-1 onto the active site in the closed form to prevent autoactivation. The open-closed equilibrium also defines a new structural framework for the mechanism of activation of prothrombin by prothrombinase. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  7. Timing Solution and Single-pulse Properties for Eight Rotating Radio Transients

    Energy Technology Data Exchange (ETDEWEB)

    Cui, B.-Y.; McLaughlin, M. A. [Department of Physics and Astronomy West Virginia University Morgantown, WV 26506 (United States); Boyles, J. [Department of Physics and Astronomy West Kentucky University Bowling Green, KY 42101 (United States); Palliyaguru, N. [Physics and Astronomy Department Texas Tech University Lubbock, TX 79409-1051 (United States)

    2017-05-01

    Rotating radio transients (RRATs), loosely defined as objects that are discovered through only their single pulses, are sporadic pulsars that have a wide range of emission properties. For many of them, we must measure their periods and determine timing solutions relying on the timing of their individual pulses, while some of the less sporadic RRATs can be timed by using folding techniques as we do for other pulsars. Here, based on Parkes and Green Bank Telescope (GBT) observations, we introduce our results on eight RRATs including their timing-derived rotation parameters, positions, and dispersion measures (DMs), along with a comparison of the spin-down properties of RRATs and normal pulsars. Using data for 24 RRATs, we find that their period derivatives are generally larger than those of normal pulsars, independent of any intrinsic correlation with period, indicating that RRATs’ highly sporadic emission may be associated with intrinsically larger magnetic fields. We carry out Lomb–Scargle tests to search for periodicities in RRATs’ pulse detection times with long timescales. Periodicities are detected for all targets, with significant candidates of roughly 3.4 hr for PSR J1623−0841 and 0.7 hr for PSR J1839−0141. We also analyze their single-pulse amplitude distributions, finding that log-normal distributions provide the best fits, as is the case for most pulsars. However, several RRATs exhibit power-law tails, as seen for pulsars emitting giant pulses. This, along with consideration of the selection effects against the detection of weak pulses, imply that RRAT pulses generally represent the tail of a normal intensity distribution.

  8. Timing Solution and Single-pulse Properties for Eight Rotating Radio Transients

    Science.gov (United States)

    Cui, B.-Y.; Boyles, J.; McLaughlin, M. A.; Palliyaguru, N.

    2017-05-01

    Rotating radio transients (RRATs), loosely defined as objects that are discovered through only their single pulses, are sporadic pulsars that have a wide range of emission properties. For many of them, we must measure their periods and determine timing solutions relying on the timing of their individual pulses, while some of the less sporadic RRATs can be timed by using folding techniques as we do for other pulsars. Here, based on Parkes and Green Bank Telescope (GBT) observations, we introduce our results on eight RRATs including their timing-derived rotation parameters, positions, and dispersion measures (DMs), along with a comparison of the spin-down properties of RRATs and normal pulsars. Using data for 24 RRATs, we find that their period derivatives are generally larger than those of normal pulsars, independent of any intrinsic correlation with period, indicating that RRATs’ highly sporadic emission may be associated with intrinsically larger magnetic fields. We carry out Lomb-Scargle tests to search for periodicities in RRATs’ pulse detection times with long timescales. Periodicities are detected for all targets, with significant candidates of roughly 3.4 hr for PSR J1623-0841 and 0.7 hr for PSR J1839-0141. We also analyze their single-pulse amplitude distributions, finding that log-normal distributions provide the best fits, as is the case for most pulsars. However, several RRATs exhibit power-law tails, as seen for pulsars emitting giant pulses. This, along with consideration of the selection effects against the detection of weak pulses, imply that RRAT pulses generally represent the tail of a normal intensity distribution.

  9. Solute transport along a single fracture in a porous rock: a simple analytical solution and its extension for modeling velocity dispersion

    Science.gov (United States)

    Liu, Longcheng; Neretnieks, Ivars; Shahkarami, Pirouz; Meng, Shuo; Moreno, Luis

    2018-02-01

    A simple and robust solution is developed for the problem of solute transport along a single fracture in a porous rock. The solution is referred to as the solution to the single-flow-path model and takes the form of a convolution of two functions. The first function is the probability density function of residence-time distribution of a conservative solute in the fracture-only system as if the rock matrix is impermeable. The second function is the response of the fracture-matrix system to the input source when Fickian-type dispersion is completely neglected; thus, the effects of Fickian-type dispersion and matrix diffusion have been decoupled. It is also found that the solution can be understood in a way in line with the concept of velocity dispersion in fractured rocks. The solution is therefore extended into more general cases to also account for velocity variation between the channels. This leads to a development of the multi-channel model followed by detailed statistical descriptions of channel properties and sensitivity analysis of the model upon changes in the model key parameters. The simulation results obtained by the multi-channel model in this study fairly well agree with what is often observed in field experiments—i.e. the unchanged Peclet number with distance, which cannot be predicted by the classical advection-dispersion equation. In light of the findings from the aforementioned analysis, it is suggested that forced-gradient experiments can result in considerably different estimates of dispersivity compared to what can be found in natural-gradient systems for typical channel widths.

  10. A split-optimization approach for obtaining multiple solutions in single-objective process parameter optimization.

    Science.gov (United States)

    Rajora, Manik; Zou, Pan; Yang, Yao Guang; Fan, Zhi Wen; Chen, Hung Yi; Wu, Wen Chieh; Li, Beizhi; Liang, Steven Y

    2016-01-01

    It can be observed from the experimental data of different processes that different process parameter combinations can lead to the same performance indicators, but during the optimization of process parameters, using current techniques, only one of these combinations can be found when a given objective function is specified. The combination of process parameters obtained after optimization may not always be applicable in actual production or may lead to undesired experimental conditions. In this paper, a split-optimization approach is proposed for obtaining multiple solutions in a single-objective process parameter optimization problem. This is accomplished by splitting the original search space into smaller sub-search spaces and using GA in each sub-search space to optimize the process parameters. Two different methods, i.e., cluster centers and hill and valley splitting strategy, were used to split the original search space, and their efficiency was measured against a method in which the original search space is split into equal smaller sub-search spaces. The proposed approach was used to obtain multiple optimal process parameter combinations for electrochemical micro-machining. The result obtained from the case study showed that the cluster centers and hill and valley splitting strategies were more efficient in splitting the original search space than the method in which the original search space is divided into smaller equal sub-search spaces.

  11. Ivy signs on FLAIR images before and after STA-MCA anastomosis in patients with Moyamoya disease

    International Nuclear Information System (INIS)

    Ideguchi, Reiko; Enokizono, Mikako; Uetani, Masataka; Morikawa, Minoru; Ogawa, Yoji; Nagata, Izumi

    2011-01-01

    Background: Leptomeningeal high signal intensity (ivy sign) on fluid-attenuated inversion-recovery (FLAIR) MR imaging is one of the features of Moyamoya disease. However, the correlation between ivy sign and cerebral perfusion status has not been fully evaluated. Purpose: To characterize ivy sign on FLAIR images in Moyamoya disease and compare this finding with hemodynamic alterations on perfusion single-photon emission CT (SPECT) obtained before and after bypass surgery. Material and Methods: Sixteen patients with angiographically confirmed Moyamoya disease who underwent superficial temporal artery-middle cerebral artery (STA-MCA) anastomosis were included in the study. The presence of ivy sign on FLAIR images was classified as 'negative', 'minimal' and 'positive'. We evaluated the relationship between ivy sign and findings of SPECT, including cerebral vascular reserve (CVR) before and after surgery. Results: Minimal or positive ivy sign was seen in 13 (81%) of 16 patients, and 21 (66%) of 32 hemispheres. CVR in the areas with positive or minimal ivy sign was lower than that in the areas with negative ivy sign. After STA-MCA anastomosis, ivy sign disappeared or decreased in all 21 hemispheres demonstrating ivy sign. SPECT demonstrated apparent hemodynamic improvement in areas demonstrating disappearance or decrease of ivy sign. Conclusion: Ivy sign on FLAIR image is seen in areas with decreased cerebral perfusion. The sign is useful for non-invasive assessment of cerebral hemodynamic status before and after surgery

  12. Unsteady fluid flow in a slightly curved pipe: A comparative study of a matched asymptotic expansions solution with a single analytical solution

    Energy Technology Data Exchange (ETDEWEB)

    Messaris, Gerasimos A. T., E-mail: messaris@upatras.gr [Department of Physics, Division of Theoretical Physics, University of Patras, GR 265 04 Rion (Greece); School of Science and Technology, Hellenic Open University, 11 Sahtouri Street, GR 262 22 Patras (Greece); Hadjinicolaou, Maria [School of Science and Technology, Hellenic Open University, 11 Sahtouri Street, GR 262 22 Patras (Greece); Karahalios, George T. [Department of Physics, Division of Theoretical Physics, University of Patras, GR 265 04 Rion (Greece)

    2016-08-15

    The present work is motivated by the fact that blood flow in the aorta and the main arteries is governed by large finite values of the Womersley number α and for such values of α there is not any analytical solution in the literature. The existing numerical solutions, although accurate, give limited information about the factors that affect the flow, whereas an analytical approach has an advantage in that it can provide physical insight to the flow mechanism. Having this in mind, we seek analytical solution to the equations of the fluid flow driven by a sinusoidal pressure gradient in a slightly curved pipe of circular cross section when the Womersley number varies from small finite to infinite values. Initially the equations of motion are expanded in terms of the curvature ratio δ and the resulting linearized equations are solved analytically in two ways. In the first, we match the solution for the main core to that for the Stokes boundary layer. This solution is valid for very large values of α. In the second, we derive a straightforward single solution valid to the entire flow region and for 8 ≤ α < ∞, a range which includes the values of α that refer to the physiological flows. Each solution contains expressions for the axial velocity, the stream function, and the wall stresses and is compared to the analogous forms presented in other studies. The two solutions give identical results to each other regarding the axial flow but differ in the secondary flow and the circumferential wall stress, due to the approximations employed in the matched asymptotic expansion process. The results on the stream function from the second solution are in agreement with analogous results from other numerical solutions. The second solution predicts that the atherosclerotic plaques may develop in any location around the cross section of the aortic wall unlike to the prescribed locations predicted by the first solution. In addition, it gives circumferential wall stresses

  13. Parameter dependence of homoclinic solutions in a single long Josephson junction

    NARCIS (Netherlands)

    van den Berg, J.B.; van Gils, Stephanus A.; Visser, T.P.P.

    2003-01-01

    For a model of the long Josephson junction one can calculate for which parameter values there exists a homoclinic solution (fluxon solution). These parameter values appear to lie on a spiral. We show that this is a consequence of the presence of a heteroclinic solution, which lies at the centre of

  14. Two Positive Periodic Solutions for a Neutral Delay Model of Single-Species Population Growth with Harvesting

    OpenAIRE

    Fang, Hui

    2012-01-01

    By coincidence degree theory for k-set-contractive mapping, this paper establishes a new criterion for the existence of at least two positive periodic solutions for a neutral delay model of single-species population growth with harvesting. An example is given to illustrate the effectiveness of the result.

  15. Two Positive Periodic Solutions for a Neutral Delay Model of Single-Species Population Growth with Harvesting

    Directory of Open Access Journals (Sweden)

    Hui Fang

    2012-01-01

    Full Text Available By coincidence degree theory for k-set-contractive mapping, this paper establishes a new criterion for the existence of at least two positive periodic solutions for a neutral delay model of single-species population growth with harvesting. An example is given to illustrate the effectiveness of the result.

  16. Contaminant transport in fractured porous media: analytical solution for a two-member decay chain in a single fracture

    International Nuclear Information System (INIS)

    Sudicky, E.A.; Frind, E.O.

    1984-01-01

    An analytical solution is presented for the problem of radionuclide chain decay during transport through a discrete fracture situated in a porous rock matrix. The solution takes into account advection along the fracture, molecular diffusion from the fracture to the porous matrix, adsorption on the fracture face, adsorption in the rock matrix, and radioactive decay. The solution for the daughter product is in the form of a double integral which is evaluated by Gauss-Legendre quadrature. Results show that the daughter product tends to advance ahead of the parent nuclide even when the half-life of the parent is larger. This is attributed to the effect of chain decay in the matrix, which tends to reduce the diffusive loss of the daughter along the fracture. The examples also demonstrate that neglecting the parent nuclide and modeling its daughter as a single species can result in significant overestimation of arrival times at some point along the fracture. Although the analytical solution is restricted to a two-member chain for practical reasons, it represents a more realistic description of nuclide transport along a fracture than available single-species models. The solution may be of use for application to other contaminants undergoing different types of first-order transformation reactions

  17. PCR amplification of microsatellites from single cells of Karenia brevis preserved in Lugol's iodine solution.

    Science.gov (United States)

    Henrichs, D W; Renshaw, M A; Santamaria, C A; Richardson, B; Gold, J R; Campbell, L

    2008-01-01

    A simple and effective protocol is described for multiplex polymerase chain reaction (PCR) amplification of single cells of Karenia brevis. The protocol requires minimum processing, avoids additions that might dilute target DNA template, and can be used on cells preserved in Lugol's iodine preservative. Destaining of Lugol's-preserved cells with sodium thiosulfate allowed successful amplification of single-copy, nuclear-encoded microsatellites in single cells of K. brevis that have been preserved for up to 6 years.

  18. Sparse Solutions for Single Class SVMs: A Bi-Criterion Approach

    Data.gov (United States)

    National Aeronautics and Space Administration — In this paper we propose an innovative learning algorithm - a variation of One-class Support Vector Machines (SVMs) learning algorithm to produce sparser solutions...

  19. SOLUTIONING

    Directory of Open Access Journals (Sweden)

    Maria de Hoyos Guajardo, Ph.D. Candidate, M.Sc., B.Eng.

    2004-11-01

    Full Text Available The theory that is presented below aims to conceptualise how a group of undergraduate students tackle non-routine mathematical problems during a problem-solving course. The aim of the course is to allow students to experience mathematics as a creative process and to reflect on their own experience. During the course, students are required to produce a written ‘rubric’ of their work, i.e., to document their thoughts as they occur as well as their emotionsduring the process. These ‘rubrics’ were used as the main source of data.Students’ problem-solving processes can be explained as a three-stage process that has been called ‘solutioning’. This process is presented in the six sections below. The first three refer to a common area of concern that can be called‘generating knowledge’. In this way, generating knowledge also includes issues related to ‘key ideas’ and ‘gaining understanding’. The third and the fourth sections refer to ‘generating’ and ‘validating a solution’, respectively. Finally, once solutions are generated and validated, students usually try to improve them further before presenting them as final results. Thus, the last section deals with‘improving a solution’. Although not all students go through all of the stages, it may be said that ‘solutioning’ considers students’ main concerns as they tackle non-routine mathematical problems.

  20. Separation of Lead (Pb2+ and Cadmium (Cd2+ from Single and Binary Salt Aqueous Solutions Using Nanofiltration Membranes

    Directory of Open Access Journals (Sweden)

    Ahmed Abed Mohammed

    2016-04-01

    Full Text Available The present work reports on the performance of three types of nanofiltration membranes in the removal of highly polluting and toxic lead (Pb2+ and cadmium (Cd2+ from single and binary salt aqueous solutions simulating real wastewaters. The effect of the operating variables (pH (5.5-6.5, types of NF membrane and initial ions concentration (10-250 ppm on the separation process and water flux was investigated. It was observed that the rejection efficiency increased with increasing pH of solution and decreasing the initial metal ions concentrations. While the flux decreased with increasing pH of solution and increasing initial metal ions concentrations. The maximum rejection of lead and cadmium ions in single salt solution was 99%, 97.5 % and 98 % at pH 6, 6.5 and 6.2 and 78%, 49.2% and 44% at pH 6.5, 6.2 and 6.5 for NF1, NF2 and NF3 respectively. On the other hand, maximum permeate flux for single NF2 (32.2> NF3 (16.1>NF1 (14.2 (l/m2.h for 100 ppm, higher than binary salt solution was NF2 (23.7 ˃ NF3 (13 ˃ NF1 (8 (l/m2.h for (10 Pb2+/50 Cd2+ ppm. The NF membranes proved able to achieve high separation efficiency of both lead and cadmium ions in very suitable conditions, leaving wastewaters in a condition suitable prior discharged into the environment.

  1. Inverse scattering solution for the spatially heterogeneous compliance of a single fracture

    NARCIS (Netherlands)

    Minato, S.; Ghose, R.

    2013-01-01

    Characterizing the spatially heterogeneous fracture compliance through use of elastic waves has the potential to illuminate the hydraulic and mechanical properties along a fracture. We formulate the inverse scattering problem to estimate the heterogeneous compliance distribution along a single

  2. Electric light scattering from single-stranded DNA in linear polyacrylamide solutions.

    Science.gov (United States)

    Todorov, R; Starchev, K; Stoylov, S P

    2001-01-01

    The electric light scattering (ELS) of ssDNA (calf thymus, 10 kbp, 55 micrograms/mL) in denaturing polyacrylamide (PAA) solutions was studied as a function of applied sinusoidal electric field and polymer concentration. Electric fields of strengths up to 300 V/cm and of frequencies between 100 and 5000 Hz were applied. It was found that the ELS effect increases with the field strength and decreases at high frequencies. The dependence of the ELS effect of ssDNA on polymer concentration passes through a maximum at 1% PAA. The relaxation times of decay of the ELS effect increase with increasing polymer concentrations. It was demonstrated that ELS is a useful method for investigation of ssDNA behavior in the course of pulse-field electrophoresis in polymer solutions.

  3. The exact solution of the Ising quantum chain with alternating single and sector defects

    International Nuclear Information System (INIS)

    Zhang Degang; Li Bozang; Li Yun

    1992-10-01

    The Ising quantum chain with alternating single and sector defects is solved exactly by using the technique of Lieb, Schultz and Mattis. The energy spectrum of this model is shown to have a tower structure if and only if these defects constitute a commensurate configuration. This means that conformal invariance is preserved under these circumstances. (author). 13 refs

  4. Advantages of using raw materials in low cost sustainable structural solutions for single-family buildings

    OpenAIRE

    Murta, A.; Teixeira, C.; Varum, H.; Bentes, I.; Pinto, J.

    2010-01-01

    In the last decades, the Portuguese housing building industry has been mainly fo-cused on the construction based on reinforced concrete framed structures and non-structural clay brick masonry for exterior and interior partition walls. Recently, this industry started to in-clude alternative structural materials, such as steel and timber. The earth based construction techniques and solutions still remains limited to individual cases, in which the owner and/or contractor have a particular concer...

  5. Integrating chemical imaging of cationic trace metal solutes and pH into a single hydrogel layer

    Energy Technology Data Exchange (ETDEWEB)

    Hoefer, Christoph [Department of Forest and Soil Sciences, Institute of Soil Research, University of Natural Resources and Life Sciences, Vienna, Konrad-Lorenz-Strasse 24, A-3430 Tulln (Austria); Santner, Jakob, E-mail: jakob.santner@boku.ac.at [Department of Forest and Soil Sciences, Institute of Soil Research, University of Natural Resources and Life Sciences, Vienna, Konrad-Lorenz-Strasse 24, A-3430 Tulln (Austria); Department of Crop Sciences, Division of Agronomy, University of Natural Resources and Life Sciences, Vienna, Konrad-Lorenz-Strasse 24, 3430 Tulln (Austria); Borisov, Sergey M. [Institute of Analytical Chemistry and Food Chemistry, Graz University of Technology, Stremayrgasse 9, A-8010, Graz (Austria); Wenzel, Walter W.; Puschenreiter, Markus [Department of Forest and Soil Sciences, Institute of Soil Research, University of Natural Resources and Life Sciences, Vienna, Konrad-Lorenz-Strasse 24, A-3430 Tulln (Austria)

    2017-01-15

    Gel-based, two-dimensional (2D) chemical imaging techniques are versatile methods for investigating biogeochemically active environments at high spatial resolution (sub-mm). State-of-the-art solute imaging techniques, such as diffusive gradients in thin films (DGT) and planar optodes (PO), employ passive solute sampling or sensing. Combining these methods will provide powerful tools for studying the biogeochemistry of biological niches in soils and sediments. In this study we aimed at developing a combined single-layer gel for direct pH imaging using PO and sampling of anionic and cationic solutes by DGT, with subsequent analysis of the bound solutes by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). We tested three ultra-thin (<100 μm) polyurethane-based gels, incorporating anion and cation binding materials and the fluorescent pH indicator DCIFODA (2′,7′-dichloro-5(6)-N-octadecyl-carboxamidofluorescein). Results showed that PO-based pH sensing using DCIFODA was impossible in the presence of the anion binding materials due to interferences with DCIFODA protonation. One gel, containing only a cation binding material and DCIFODA, was fully characterized and showed similar performance characteristics as comparable DGT-only gels (applicable pH range: pH 5–8, applicable ionic strength range: 1–20 mmol L{sup -1}, cation binding capacity ∼24 μg cm{sup −2}). The dynamic range for PO-based pH mapping was between pH 5.5 and 7.5 with t{sub 90} response time of ∼60 min. In a case study we demonstrated the gel's suitability for multi-analyte solute imaging and mapped pH gradients and concurrent metal solubility patterns in the rhizosphere of Salix smithiana. pH decreases in the rooted soil were co-localized with elevated solute fluxes of Al{sup 3+}, Co{sup 2+}, Cu{sup 2+}, Fe, Mn{sup 2+}, Ni{sup 2+} and Pb{sup 2+}, indicating pH-induced metal solubilisation. - Highlights: • Diffusive gradients in thin films (DGT) and planar

  6. Effect of a wound cleansing solution on wound bed preparation and inflammation in chronic wounds: a single-blind RCT.

    Science.gov (United States)

    Bellingeri, A; Falciani, F; Traspedini, P; Moscatelli, A; Russo, A; Tino, G; Chiari, P; Peghetti, A

    2016-03-01

    Research into surfactant solutions for the debridement of chronic wounds suggests that surfactants may support wound bed preparation (WBP) in chronic wounds, however their efficacy has not been evaluated in randomised controlled trials (RCTs). Our aim was to assess the clinical efficacy of a propylbetaine-polihexanide (PP) solution versus normal saline (NS) solution in WBP, assessing inflammatory signs and wound size reduction in patients with pressure ulcers (PUs) or vascular leg ulcers. In a single-blinded randomised controlled trial (RCT) patients were randomly allocated to two groups and treated with either propylbetaine-polihexanide (PP) solution (Prontosan) or NS. Wounds were assessed using the Bates-Jensen wound assessment tool (BWAT). Assessments took place at inclusion (T0), day 7 (T1), day 14 (T2), day 21 (T3), and day 28 (T4). Outcomes were analysed using a two-tailed Student's t-test. A total of 289 patients were included. Both groups had similar demographics, clinical status, and wound characteristics. Data analysis showed statistically significant differences between T0 and T4 for the following outcomes: BWAT total score, p=0.0248; BWAT score for inflammatory items, p=0.03; BWAT scores for wound size reduction (p=0.049) and granulation tissue improvement (p=0.043), all in favour of PP. The assessment of pain did not show any significant difference between the two groups. The study results showed significantly higher efficacy of the PP solution versus NS solution, in reducing inflammatory signs and accelerating the healing of vascular leg ulcers and PUs. This evidence supports the update of protocols for the care of chronic wounds. The authors have no conflict of interest regarding this research. This is an investigator initiated trial. B. Braun Milano SpA kindly provided the material under investigation for both treatment groups, and paid the Ethics Committees' application fees in all participating centres.

  7. Accurate analytic solution of chemical master equations for gene regulation networks in a single cell

    Science.gov (United States)

    Huang, Guan-Rong; Saakian, David B.; Hu, Chin-Kun

    2018-01-01

    Studying gene regulation networks in a single cell is an important, interesting, and hot research topic of molecular biology. Such process can be described by chemical master equations (CMEs). We propose a Hamilton-Jacobi equation method with finite-size corrections to solve such CMEs accurately at the intermediate region of switching, where switching rate is comparable to fast protein production rate. We applied this approach to a model of self-regulating proteins [H. Ge et al., Phys. Rev. Lett. 114, 078101 (2015), 10.1103/PhysRevLett.114.078101] and found that as a parameter related to inducer concentration increases the probability of protein production changes from unimodal to bimodal, then to unimodal, consistent with phenotype switching observed in a single cell.

  8. Photophysical properties and photochemical rearrangement of single crystal salicylideneaniline in solution

    Science.gov (United States)

    Bayrakçeken, Fuat; Sevinç, Papatya C.

    2007-01-01

    Salicylideneaniline originally crystallized from a solution has lemon yellow color. Irradiation with near ultraviolet causes the color change from yellow to red. The red state changes spontaneously back to yellow in 2 ms. This change is accelerated by visible light. Kinetic data are reported in the temperature range between 10 and 60 °C, for the dark fading reactions of the colored isomers formed by the near ultraviolet irradiation. Observed the decay kinetics was first order reactions. Activation energies and entropies of activation are reported for ethanol. The observation of T-T absorption and emission were complicated due to the colored isomer formation during the optical pumping.

  9. Stability of equilibrium solutions of Hamiltonian systems with n-degrees of freedom and single resonance in the critical case

    Science.gov (United States)

    dos Santos, Fabio; Vidal, Claudio

    2018-04-01

    In this paper we give new results for the stability of one equilibrium solution of an autonomous analytic Hamiltonian system in a neighborhood of the equilibrium point with n-degrees of freedom. Our Main Theorem generalizes several results existing in the literature and mainly we give information in the critical cases (i.e., the condition of stability and instability is not fulfilled). In particular, our Main Theorem provides necessary and sufficient conditions for stability of the equilibrium solutions under the existence of a single resonance. Using analogous tools used in the Main Theorem for the critical case, we study the stability or instability of degenerate equilibrium points in Hamiltonian systems with one degree of freedom. We apply our results to the stability of Hamiltonians of the type of cosmological models as in planar as in the spatial case.

  10. Evaluation of solvent systems for optimized extractables studies of single use bioprocessing solutions.

    Science.gov (United States)

    Dorival-García, Noemí; Bones, Jonathan

    2017-09-01

    Despite their advantages, there is concern that single-use systems used in biopharmaceutical manufacture might release potentially toxic substances during standard unit operations that negatively impact cell growth. Characterization of the extractables profile for single-use systems is necessary to know which compounds potentially become leachables under operational cell culture conditions. A key issue in the design of extractables studies is the composition of the model solvent, in particular its pH and polarity. In this study, a new approach, based on design of experiments (DoE), has been applied to determine the composition of the model solvent for extractable profiling of single-use bags (SUBs). Particular focus was placed on the determination of the degradation products of the antioxidant Irgafos 168 ® , due to evidence that some of these degradation products have cytotoxic effects on CHO cells. Results indicated that 2-propanol:water is the most appropriate solvent for the extraction of highly hydrophobic compounds with polar groups and/or acid-base properties from SUBs. The described DoE approach simplifies the number of experiments, evaluates all possible solvent water mixtures to select the best extraction solvent based on polarity, establishes the influence of each variable and provides information about variable interaction, which represents an important improvement over current best practice. The developed approach was applied to seven SUBs from different vendors and production dates facilitating the identification of potentially non-satisfactory films for cultivation of CHO cell lines under process conditions. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Optics clustered to output unique solutions: a multi-laser facility for combined single molecule and ensemble microscopy.

    Science.gov (United States)

    Clarke, David T; Botchway, Stanley W; Coles, Benjamin C; Needham, Sarah R; Roberts, Selene K; Rolfe, Daniel J; Tynan, Christopher J; Ward, Andrew D; Webb, Stephen E D; Yadav, Rahul; Zanetti-Domingues, Laura; Martin-Fernandez, Marisa L

    2011-09-01

    Optics clustered to output unique solutions (OCTOPUS) is a microscopy platform that combines single molecule and ensemble imaging methodologies. A novel aspect of OCTOPUS is its laser excitation system, which consists of a central core of interlocked continuous wave and pulsed laser sources, launched into optical fibres and linked via laser combiners. Fibres are plugged into wall-mounted patch panels that reach microscopy end-stations in adjacent rooms. This allows multiple tailor-made combinations of laser colours and time characteristics to be shared by different end-stations minimising the need for laser duplications. This setup brings significant benefits in terms of cost effectiveness, ease of operation, and user safety. The modular nature of OCTOPUS also facilitates the addition of new techniques as required, allowing the use of existing lasers in new microscopes while retaining the ability to run the established parts of the facility. To date, techniques interlinked are multi-photon/multicolour confocal fluorescence lifetime imaging for several modalities of fluorescence resonance energy transfer (FRET) and time-resolved anisotropy, total internal reflection fluorescence, single molecule imaging of single pair FRET, single molecule fluorescence polarisation, particle tracking, and optical tweezers. Here, we use a well-studied system, the epidermal growth factor receptor network, to illustrate how OCTOPUS can aid in the investigation of complex biological phenomena. © 2011 American Institute of Physics

  12. A single lysis solution for the analysis of tissue samples by different proteomic technologies

    DEFF Research Database (Denmark)

    Gromov, P.; Celis, J.E.; Gromova, I.

    2008-01-01

    -based proteomics (reverse-phase lysate arrays or direct antibody arrays), allowing the direct comparison of qualitative and quantitative data yielded by these technologies when applied to the same samples. The usefulness of the CLB1 solution for gel-based proteomics was further established by 2D PAGE analysis...... taken place in molecular biology, cell biology and genomics there is a pressing need to accelerate the translation of basic discoveries into clinical applications. This need, compounded by mounting evidence that cellular model systems are unable to fully recapitulate all biological aspects of human...... dissease, is driving scientists to increasingly use clinically relevant samples for biomarker and target discovery. Tissues are heterogeneous and as a result optimization of sample preparation is critical for generating accurate, representative, and highly reproducible quantitative data. Although a large...

  13. Calculation of formation constants of single-charged complex ions of bivalent metals in solutions

    International Nuclear Information System (INIS)

    Allakhverdov, G.R.

    1985-01-01

    A new method for calculating formation constants of complexes of bivalent metals in solutions is suggested. The method is based on using relations characterizing concentration dependence of activity factors and theis interrelation with osmotic coefficients. It is shown that the results of formation constant calculations of complexes MX + (M-Mg, Ca, Sr, Ba, Cd, Co, Zn, Ni, Fe, Mn, Cu; X-Cl, Br, I, NOΛ3) performed with a computer using experimental data in the 0.1-0.5 m(m-molality) concentration range, are in satisfactory agreement with literature data obtained by various research methods. It is established that for all metals the stability of halide complexes drops in the MCl + >MBr + >MI + series. In the series of complexes formed by alkaline earth metals, the complexes stability grows with increase of metal atomic number

  14. The Single Row Routing Problem Revisited: A Solution Based on Genetic Algorithms

    Directory of Open Access Journals (Sweden)

    Albert Y. Zomaya

    2002-01-01

    Full Text Available With the advent of VLSI technology, circuits with more than one million transistors have been integrated onto a single chip. As the complexity of ICs grows, the time and money spent on designing the circuits become more important. A large, often dominant, part of the cost and time required to design an IC is consumed in the routing operation. The routing of carriers, such as in IC chips and printed circuit boards, is a classical problem in Computer Aided Design. With the complexity inherent in VLSI circuits, high performance routers are necessary. In this paper, a crucial step in the channel routing technique, the single row routing (SRR problem, is considered. First, we discuss the relevance of SRR in the context of the general routing problem. Secondly, we show that heuristic algorithms are far from solving the general problem. Next, we introduce evolutionary computation, and, in particular, genetic algorithms (GAs as a justifiable method in solving the SRR problem. Finally, an efficient O (nk complexity technique based on GAs heuristic is obtained to solve the general SRR problem containing n nodes. Experimental results show that the algorithm is faster and can often generate better results than many of the leading heuristics proposed in the literature.

  15. Size, shape, and diffusivity of a single Debye-Hückel polyelectrolyte chain in solution

    Science.gov (United States)

    Soysa, W. Chamath; Dünweg, B.; Prakash, J. Ravi

    2015-08-01

    Brownian dynamics simulations of a coarse-grained bead-spring chain model, with Debye-Hückel electrostatic interactions between the beads, are used to determine the root-mean-square end-to-end vector, the radius of gyration, and various shape functions (defined in terms of eigenvalues of the radius of gyration tensor) of a weakly charged polyelectrolyte chain in solution, in the limit of low polymer concentration. The long-time diffusivity is calculated from the mean square displacement of the centre of mass of the chain, with hydrodynamic interactions taken into account through the incorporation of the Rotne-Prager-Yamakawa tensor. Simulation results are interpreted in the light of the Odjik, Skolnick, Fixman, Khokhlov, and Khachaturian blob scaling theory (Everaers et al., Eur. Phys. J. E 8, 3 (2002)) which predicts that all solution properties are determined by just two scaling variables—the number of electrostatic blobs X and the reduced Debye screening length, Y. We identify three broad regimes, the ideal chain regime at small values of Y, the blob-pole regime at large values of Y, and the crossover regime at intermediate values of Y, within which the mean size, shape, and diffusivity exhibit characteristic behaviours. In particular, when simulation results are recast in terms of blob scaling variables, universal behaviour independent of the choice of bead-spring chain parameters, and the number of blobs X, is observed in the ideal chain regime and in much of the crossover regime, while the existence of logarithmic corrections to scaling in the blob-pole regime leads to non-universal behaviour.

  16. Hydrogen Evolution Reaction in Alkaline Solution: From Theory, Single Crystal Models, to Practical Electrocatalysts.

    Science.gov (United States)

    Zheng, Yao; Jiao, Yan; Qiao, Shizhang; Vasileff, Anthony

    2017-12-01

    The hydrogen evolution reaction (HER) is a fundamental process in electrocatalysis and plays an important role in energy conversion for the development of hydrogen-based energy sources. However, the considerably slow rate of the HER in alkaline conditions has hindered advances in water splitting techniques for high-purity hydrogen production. Differing from well documented acidic HER, the mechanistic aspects of alkaline HER are yet to be settled. Herein, we present a critical appraisal of alkaline HER electrocatalysis, with a special emphasis on the connection between fundamental surface electrochemistry on single crystal models and the derived molecular design principle for real-world electrocatalysts. By presenting some typical examples across theoretical calculations, surface characterization, and electrochemical experiments, we try to address some key ongoing debates to deliver a better understanding of alkaline HER at the atomic level. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Fast Single Image Super-Resolution Using a New Analytical Solution for l2 - l2 Problems.

    Science.gov (United States)

    Zhao, Ningning; Wei, Qi; Basarab, Adrian; Dobigeon, Nicolas; Kouame, Denis; Tourneret, Jean-Yves

    2016-08-01

    This paper addresses the problem of single image super-resolution (SR), which consists of recovering a high-resolution image from its blurred, decimated, and noisy version. The existing algorithms for single image SR use different strategies to handle the decimation and blurring operators. In addition to the traditional first-order gradient methods, recent techniques investigate splitting-based methods dividing the SR problem into up-sampling and deconvolution steps that can be easily solved. Instead of following this splitting strategy, we propose to deal with the decimation and blurring operators simultaneously by taking advantage of their particular properties in the frequency domain, leading to a new fast SR approach. Specifically, an analytical solution is derived and implemented efficiently for the Gaussian prior or any other regularization that can be formulated into an l2 -regularized quadratic model, i.e., an l2 - l2 optimization problem. The flexibility of the proposed SR scheme is shown through the use of various priors/regularizations, ranging from generic image priors to learning-based approaches. In the case of non-Gaussian priors, we show how the analytical solution derived from the Gaussian case can be embedded into traditional splitting frameworks, allowing the computation cost of existing algorithms to be decreased significantly. Simulation results conducted on several images with different priors illustrate the effectiveness of our fast SR approach compared with existing techniques.

  18. Fast Single Image Super-resolution using a New Analytical Solution for l2-l2 Problems.

    Science.gov (United States)

    Zhao, Ningning; Wei, Qi; Basarab, Adrian; Dobigeon, Nicolas; Kouame, Denis; Tourneret, Jean-Yves

    2016-05-11

    This paper addresses the problem of single image super-resolution (SR), which consists of recovering a high resolution image from its blurred, decimated and noisy version. The existing algorithms for single image SR use different strategies to handle the decimation and blurring operators. In addition to the traditional first-order gradient methods, recent techniques investigate splitting-based methods dividing the SR problem into up-sampling and deconvolution steps that can be easily solved. Instead of following this splitting strategy, we propose to deal with the decimation and blurring operators simultaneously by taking advantage of their particular properties in the frequency domain, leading to a new fast SR approach. Specifically, an analytical solution can be obtained and implemented efficiently for the Gaussian prior or any other regularization that can be formulated into an `2-regularized quadratic model, i.e., an `2-`2 optimization problem. Furthermore, the flexibility of the proposed SR scheme is shown through the use of various priors/regularizations, ranging from generic image priors to learning-based approaches. In the case of non-Gaussian priors, we show how the analytical solution derived from the Gaussian case can be embedded into traditional splitting frameworks, allowing the computation cost of existing algorithms to be decreased significantly. Simulation results conducted on several images with different priors illustrate the effectiveness of our fast SR approach compared with the existing techniques.

  19. Improved Laser Manipulation for On-chip Fabricated Microstructures Based on Solution Replacement and Its Application in Single Cell Analysis

    Directory of Open Access Journals (Sweden)

    Tao Yue

    2014-02-01

    Full Text Available In this paper, we present the fabrication and assembly of microstructures inside a microfluidic device based on a photocrosslinkable resin and optical tweezers. We also report a method of solution replacement inside the microfluidic channel in order to improve the manipulation performance and apply the assembled microstructures for single cell cultivation. By the illumination of patterned ultraviolet (UV through a microscope, microstructures of arbitrary shape were fabricated by the photocrosslinkable resin inside a microfluidic channel. Based on the microfluidic channel with both glass and polydimethylsiloxane (PDMS surfaces, immovable and movable microstructures were fabricated and manipulated. The microstructures were fabricated at the desired places and manipulated by the optical tweezers. A rotational microstructure including a microgear and a rotation axis was assembled and rotated in demonstrating this technique. The improved laser manipulation of microstructures was achieved based on the on-chip solution replacement method. The manipulation speed of the microstructures increased when the viscosity of the solvent decreased. The movement efficiency of the fabricated microstructures inside the lower viscosity solvent was evaluated and compared with those microstructures inside the former high viscosity solvent. A novel cell cage was fabricated and the cultivation of a single yeast cell (w303 was demonstrated in the cell cage, inside the microfluidic device.

  20. Effect of temperature gradient in the solution on spiral growth of YBa2Cu3O7-x bulk single crystals

    International Nuclear Information System (INIS)

    Kanamori, Y.; Shiohara, Y.

    1996-01-01

    Bulk single crystals of Y123 are required to clarify the superconductivity phenomena and develop electronic devices using unique superconductive properties. Only the Solute Rich Liquid endash Crystal Pulling (SRL-CP) method has succeeded in continuous growth of the Y123 single crystal. In this paper, we investigated the growth of Y123 single crystals under different temperature gradients in the solution in order to understand the growth mechanism of Y123. It was revealed that Y123 single crystals grow with a spiral growth mode, which is in good agreement with the BCF theory. copyright 1996 Materials Research Society

  1. Simultaneous transport of synthetic colloids and a nonsorbing solute through single saturated natural fractures

    International Nuclear Information System (INIS)

    Reimus, P.W.; Robinson, B.A.; Nuttall, H.E.; Kale, R.

    1994-01-01

    Tracer transport experiments involving colloids that showed little tendency to attach to rock surfaces and a nonsorbing solute (iodide) -were conducted in three different well-characterized natural fractures in tuff. The colloids always arrived earlier in the effluent than the iodide, which we believe is evidence of (1) hydrodynamic chromatography and/or (2) the fact that the colloids experience a smaller effective volume in the fracture because they diffuse too slowly to enter low-velocity regions (dead zones) along the rough fracture walls. The iodide also approached the inlet concentration in the effluent more slowly than the colloids, with the concentration at a given elution volume being greater at higher flow rates. By contrast, the rate of approach of the colloid concentration to the inlet concentration did not vary with flow rate. We attribute this behavior to matrix diffusion of the iodide, with the colloids being too large/nondiffusive to experience this phenomenon. Dispersion of all tracers was greatest in the fracture of widest average aperture and least in the fracture of narrowest aperture, which is consistent with Taylor dispersion theory. The tracer experiments were modeled/interpreted using a three-step approach that involved (1) estimating the aperture distribution in each fracture using surface profiling techniques, (2) predicting the flow field in the fractures using a localized parallel-plate approximation, and (3) predicting tracer transport in the fractures using particle-tracking techniques. Although considered preliminary at this time, the model results were in qualitative agreement with the experiments

  2. Molecular dynamics simulations on aqueous two-phase systems - Single PEG-molecules in solution

    Directory of Open Access Journals (Sweden)

    Oelmeier Stefan A

    2012-08-01

    Full Text Available Abstract Background Molecular Dynamics (MD simulations are a promising tool to generate molecular understanding of processes related to the purification of proteins. Polyethylene glycols (PEG of various length are commonly used in the production and purification of proteins. The molecular mechanisms behind PEG driven precipitation, aqueous two-phase formation or the effects of PEGylation are however still poorly understood. Results In this paper, we ran MD simulations of single PEG molecules of variable length in explicitly simulated water. The resulting structures are in good agreement with experimentally determined 3D structures of PEG. The increase in surface hydrophobicity of PEG of longer chain length could be explained on an atomic scale. PEG-water interactions as well as aqueous two-phase formation in the presence of PO4 were found to be correlated to PEG surface hydrophobicity. Conclusions We were able to show that the taken MD simulation approach is capable of generating both structural data as well as molecule descriptors in agreement with experimental data. Thus, we are confident of having a good in silico representation of PEG.

  3. Providing innovative solutions in a single pill: Servier's portfolio in hypertension.

    Science.gov (United States)

    Mourad, Jean-Jacques; Guillerm, Jean-Christophe

    2016-09-01

    Jean-Jacques Mourad & Jean-Christophe Guillerm speak to Henry Ireland, Drug Evaluation Editor: Jean-Jacques Mourad talks about his vision of the current landscape and unmet medical needs in the field of hypertension. Jean-Christophe Guillerm describes the family of antihypertensive treatments from Servier, which were designed to address the current challenges in the management of hypertension by providing an adapted solution to doctors and to the specific needs of each patient. Jean-Jacques Mourad currently works as Professor of Medicine and is the Head of the Hypertension Unit at the Hôpital Avicenne in Bobigny, France. He completed his academic degrees at the Pierre and Marie Curie University, Paris VI in the field of internal and vascular medicine in 1996, and in the area of cardiovascular medicine and pharmacology in 2001. He is the past president of the French League Against Hypertension (since 2012), and the former General Secretary of the French Microcirculation Society. He is the actual Scientific Secretary of the French Society of Hypertension. He is also a member of the administrative council of the Collège Français de Pathologie Vasculaire. His research focuses on the epidemiology of hypertension, arterial structure and function, determinants of adherence to chronic treatment and the effects of antihypertensive agents. He was involved in several studies and surveys. He is a co-author of more than 130 publications and of 900 communications presented at national and international meetings. Jean-Christophe Guillerm, joined the pharmaceutical industry 17 years ago. He is currently the Head of the Cardiovascular Division for Servier, in charge of both cardiology and hypertension's medical strategy at a global level. Prior to this, he was in charge of the diabetes and internal medicine franchise at a global level. He also has experience in French commercial operations.

  4. Exploring Redox Properties of Aromatic Amino Acids in Water: Contrasting Single Photon vs Resonant Multiphoton Ionization in Aqueous Solutions.

    Science.gov (United States)

    Roy, Anirban; Seidel, Robert; Kumar, Gaurav; Bradforth, Stephen E

    2018-04-12

    Direct measurements of the valence ionization energies and the reorganization energies of the three aromatic amino acids, l-tyrosine, l-tryptophan, and l-phenylalanine, in aqueous solution using the liquid microjet technique and two different photoemission methods-X-ray photoelectron spectroscopy (XPS) at 175 eV photon energy and resonant two-photon ionization (R2PI) using 2 × 267 nm (2 × 4.64 eV) UV laser light-are reported. l-Tryptophan has the lowest vertical ionization energy, 7.3 eV, followed by tyrosine (7.8 eV) and phenylalanine (∼8.7 eV). Essentially, no variation in recovered orbital energies is observed comparing near threshold ionization to X-ray ionization. Superior sensitivity of the (background-free) R2PI scheme for solutions with very low solute concentration (<2 mM) is demonstrated in contrast to the single-photon XPS measurements, which often requires solute concentrations of 0.1-1 molar. This higher sensitivity along with chemical selectivity of the R2PI technique can be exploited for both spectroscopic assignment and as an analytical tool. The nature of the adiabatic ionization energy for the three aromatic amino acids has been explored by the R2PI approach and by empirically formulating the correlation between the estimated ionization onset with electronic and nuclear relaxation on the excited state surface. Our results have implications for understanding one-electron transfer within enzymes and in redox situations where (ir)reversible deprotonation occurs such as those manifest in the biochemistry of oxidation damage.

  5. Manufacture of Bi-cuprate thin films on MgO single crystal substrates by chemical solution deposition

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Bertelsen, Christian Vinther; Andersen, Niels Hessel

    2014-01-01

    Bi2Sr2CaCu2O8 thin films have been deposited on MgO single crystal substrates by spin-coating a solution based on 2-ethylhexanoate precursors dissolved in xylene. Pyrolysis takes place between 200°C and 450°C and is accompanied by the release of 2-ethylhexanoic acid, CO2 and H2O vapour. Highly c......-axis oriented Bi2Sr2CaCu2O8 as well as Er- or Ho-doped Bi2Sr2(Ca,Ln)Cu2O8 (Ln = Er, Ho) films were obtained after heat treatment at 840°C in air....

  6. a Molecular Approach to Electrolyte Solutions: Predicting Phase Behavior and Thermodynamic Properties of Single and Binary-Solvent Systems

    Science.gov (United States)

    Gering, Kevin Leslie

    A molecular formulation based on modern liquid state theory is applied to the properties and phase behavior of electrolyte systems containing volatile species. An electrolyte model based on the exponential modification of the Mean Spherical Approximation (EXP-MSA) is used to describe the cation-cation, cation-anion, and anion-anion distributions of the ionic species. This theory represents an improvement over the nonmodified MSA approach, and goes beyond the usual Debye-Huckel theory and Pitzer correlation for treating concentrated solutions. Electrolyte solutions such as water-salt, ammonia-salt, mixed salts, and mixed -solvent systems are investigated over a wide range of temperatures, pressures, and compositions. The usual salt properties, such as osmotic and mean activity coefficients and other thermodynamic properties (enthalpies), are calculated. The predictions are accurate to saturation limits. In addition, an iterative method is presented that is used to predict vapor-liquid equilibria (VLE) and thermodynamic properties of single-salt multisolvent electrolytes of the form solvent-cosolvent-salt. In this method, a local composition model (LCM) and EXP-MSA theory are combined with traditional phase equilibria relations to estimate the pressures and compositions of a vapor phase in equilibrium with a binary-solvent electrolyte. Also, a pseudo-solvent model is proposed as a means of obtaining a variety of averaged liquid phase electrolyte properties. To predict preferential solvation in mixed solvents, a general framework is developed that is based on predicted solvation numbers of each solvent. Preferential solvation will be shown to influence VLE. Results show that phase equilibria is accurately predicted by the above iterative method. Three mixed-solvent electrolyte systems are investigated: water -ethylene glycol-LiBr, ammonia-water-LiBr, and methanol -water-LiCl. Finally, the above electrolyte model is utilized in predicting design criteria for a single

  7. Self-Assembled CNT-Polymer Hybrids in Single-Walled Carbon Nanotubes Dispersed Aqueous Triblock Copolymer Solutions

    Science.gov (United States)

    Vijayaraghavan, D.; Manjunatha, A. S.; Poojitha, C. G.

    2018-04-01

    We have carried out scanning electron microscopy (SEM), differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS), electrical conductivity, and 1H NMR studies as a function of temperature on single-walled carbon nanotubes (SWCNTs) dispersed aqueous triblock copolymer (P123) solutions. The single-walled carbon nanotubes in this system aggregate to form bundles, and the bundles aggregate to form net-like structures. Depending on the temperature and phases of the polymer, this system exhibits three different self-assembled CNT-polymer hybrids. We find CNT-unimer hybrid at low temperatures, CNT-micelle hybrid at intermediate temperatures wherein the polymer micelles are adsorbed in the pores of the CNT nets, and another type of CNT-micelle hybrid at high temperatures wherein the polymer micelles are adsorbed on the surface of the CNT bundles. Our DSC thermogram showed two peaks related to these structural changes in the CNT-polymer hybrids. Temperature dependence of the 1H NMR chemical shifts of the molecular groups of the polymer and the AC electrical conductivity of the composite also showed discontinuous changes at the temperatures at which the CNT-polymer hybrid's structural changes are seen. Interestingly, for a higher CNT concentration (0.5 wt.%) in the system, the aggregated polymer micelles adsorbed on the CNTs exhibit cone-like and cube-like morphologies at the intermediate and at high temperatures respectively.

  8. Diagnosis of acute flank pain caused by ureteral stones: value of combined direct and indirect signs on IVU and unenhanced helical CT.

    Science.gov (United States)

    Wang, Li-Jen; Ng, Chip-Jin; Chen, Jih-Chang; Chiu, Te-Fa; Wong, Yon-Cheong

    2004-09-01

    The aim of this study was to assess the usefulness of combined direct and indirect signs on intravenous urography (IVU) and unenhanced helical computed tomography (UHCT) for the diagnosis of ureteral stones in emergency patients with acute flank pain. During an 8-month period, 82 emergency patients with acute flank pain undergoing IVU and UHCT with sufficient clinical follow-up formed the study group. The presence or absence of direct sign (visualization of ureteral stones) and indirect signs on IVU and UHCT was recorded. The diagnostic accuracy of each direct/indirect sign and their combination for the diagnosis of ureteral stones on IVU and UHCT were analyzed and compared. Of the 82 patients, 66 had ureteral stones, four had passed urinary stones prior to imaging and 12 had other diseases. The diagnostic accuracies of direct signs on IVU and UHCT for the diagnosis of ureteral stones were 79.3 and 98.8%, respectively, which was more accurate than that of any single indirect sign on IVU and UHCT. However, the diagnostic accuracy of ureteral stones by IVU increased to 90.2% when using diagnostic criteria requiring the presence of a direct sign or at least three indirect signs, and by UHCT, it increased to 100% when using diagnostic criteria requiring the presence of a direct sign with at least one indirect sign. Therefore, for emergency patients with acute flank pain, the use of the above combinations of direct/indirect signs is useful as the diagnostic criterion for ureteral stones.

  9. Diagnosis of acute flank pain caused by ureteral stones: value of combined direct and indirect signs on IVU and unenhanced helical CT

    International Nuclear Information System (INIS)

    Wang, Li-Jen; Wong, Yon-Cheong; Ng, Chip-Jin; Chen, Jih-Chang; Chiu, Te-Fa

    2004-01-01

    The aim of this study was to assess the usefulness of combined direct and indirect signs on intravenous urography (IVU) and unenhanced helical computed tomography (UHCT) for the diagnosis of ureteral stones in emergency patients with acute flank pain. During an 8-month period, 82 emergency patients with acute flank pain undergoing IVU and UHCT with sufficient clinical follow-up formed the study group. The presence or absence of direct sign (visualization of ureteral stones) and indirect signs on IVU and UHCT was recorded. The diagnostic accuracy of each direct/indirect sign and their combination for the diagnosis of ureteral stones on IVU and UHCT were analyzed and compared. Of the 82 patients, 66 had ureteral stones, four had passed urinary stones prior to imaging and 12 had other diseases. The diagnostic accuracies of direct signs on IVU and UHCT for the diagnosis of ureteral stones were 79.3 and 98.8%, respectively, which was more accurate than that of any single indirect sign on IVU and UHCT. However, the diagnostic accuracy of ureteral stones by IVU increased to 90.2% when using diagnostic criteria requiring the presence of a direct sign or at least three indirect signs, and by UHCT, it increased to 100% when using diagnostic criteria requiring the presence of a direct sign with at least one indirect sign. Therefore, for emergency patients with acute flank pain, the use of the above combinations of direct/indirect signs is useful as the diagnostic criterion for ureteral stones. (orig.)

  10. Enzymatically mediated bioprecipitation of heavy metals from industrial wastes and single ion solutions by mammalian alkaline phosphatase.

    Science.gov (United States)

    Chaudhuri, Gouri; Shah, Gaurav A; Dey, Pritam; S, Ganesh; Venu-Babu, P; Thilagaraj, W Richard

    2013-01-01

    The study was aimed at investigating the potential use of calf intestinal alkaline phosphatase (CIAP) enzyme in the removal of heavy metals (Cd(2+), Ni(2+), Co(2+) and Cr(3+/6+)) from single ion solutions as well as tannery and electroplating effluents. CIAP mediated bioremediation (white biotechnology) is a novel technique that is eco-friendly and cost effective unlike the conventional chemical technologies. Typical reactions containing the enzyme (CIAP) and p-nitrophenyl phosphate (pNPP) as substrate in Tris-HCl buffer (pH 8 and 11) and either single ion metal solutions (250 ppm and 1000 ppm) or effluents from tannery or electroplating industry were incubated at 37°C for 30 min, 60 min and 120 min. The inorganic phosphate (P(i)) generated due to catalytic breakdown of pNPP complexes free metal ions as metal-phosphate and the amount of metal precipitated was derived by estimating the reduction in the free metal ion present in the supernatant of reactions employing atomic absorption spectrophotometer (AAS). Better precipitation of metal was obtained at pH 11 than at pH 8 and between the two concentrations of different metals tested, an initial metal concentration of 250 ppm in the reaction gave more precipitation than with 1000 ppm. Experimental data showed that at pH 11, the percentage of removal of metal ions (for an initial concentration of 250 ppm) was in the following order: Cd(2+) (80.99%) > Ni(2+) (64.78%) > Cr(3+) > (46.15%) > Co(2+) (36.47%) > Cr(6+) (32.33%). The overall removal of Cr(3+) and Cr(6+) from tannery effluent was 32.77% and 37.39% respectively in 120 min at pH 11. Likewise, the overall removal of Cd(2+), Co(2+) and Ni(2+) from electroplating effluent was 50.42%, 13.93% and 38.64% respectively in 120 min at pH 11. The study demonstrates that bioprecipitation by CIAP may be a viable and environmental friendly method for clean-up of heavy metals from tannery and electroplating effluents.

  11. Use of alkali metal salts to prepare high purity single-walled carbon nanotube solutions and thin films

    Science.gov (United States)

    Ashour, Rakan F.

    Single-walled carbon nanotubes (SWCNTs) display interesting electronic and optical properties desired for many advanced thin film applications, such as transparent conductive electrodes or thin-film transistors. Large-scale production of SWCNTs generally results in polydispersed mixtures of nanotube structures. Since SWCNT electronic character (conducting or semiconducting nature) depends on the nanotube structure, application performance is being held back by this inability to discretely control SWCNT synthesis. Although a number of post-production techniques are able to separate SWCNTs based on electronic character, diameter, or chirality, most still suffer from the disadvantage of high costs of materials, equipment, or labor intensity to be relevant for large-scale production. On the other hand, chromatographic separation has emerged as a method that is compatible with large scale separation of metallic and semiconducting SWCNTs. In this work, SWCNTs, in an aqueous surfactant suspension of sodium dodecyl sulfate (SDS), are separated by their electronic character using a gel chromatography process. Metallic SWCNTs (m-SWCNTs) are collected as initial fractions since they show minimum interaction with the gel medium, whereas, semiconducting SWCNTs (sc- SWCNTs) remain adsorbed to the gel. The process of sc-SWCNT retention in the gel is found to be driven by the packing density of SDS around the SWCNTs. Through a series of separation experiments, it is shown that sc-SWCNTs can be eluted from the gel simply by disturbing the configuration of the SDS/SWCNT micellar structure. This is achieved by either introducing a solution containing a co-surfactant, such as sodium cholate (SC), or solutions of alkali metal ionic salts. Analysis of SWCNT suspensions by optical absorption provides insights into the effect of changing the metal ion (M+ = Li+, Na+, and K+) in the eluting solution. Salts with smaller metal ions (e.g. Li+) require higher concentrations to achieve

  12. Polyethylene Glycol Electrolyte Lavage Solution versus Colonic Hydrotherapy for Bowel Preparation before Colonoscopy: A Single Center, Randomized, and Controlled Study

    Directory of Open Access Journals (Sweden)

    Yan Cao

    2014-01-01

    Full Text Available This single center, randomized, and controlled study aimed to compare the effectiveness and safety of polyethylene glycol electrolyte lavage (PEG-EL solution and colonic hydrotherapy (CHT for bowel preparation before colonoscopy. A total of 196 eligible outpatients scheduled for diagnostic colonoscopy were randomly assigned to the PEG-EL (n=102 or CHT (n=94 groups. Primary outcome measures included colonic cleanliness and adverse effects. Secondary outcome measures were patient satisfaction and preference, colonoscopic findings, ileocecal arrival rate, examiner satisfaction, and cecal intubation time. The results show that PEG-EL group was associated with significantly better colonic cleanliness than CHT group, fewer adverse effects, and increased examiner satisfaction. However, the CHT group had higher patient satisfaction and higher diverticulosis detection rates. Moreover, the results showed the same ileocecal arrival rate and patient preference between the two groups (P>0.05. These findings indicate that PEG-EL is the preferred option in patients who followed the preparation instructions completely.

  13. Polyethylene Glycol Electrolyte Lavage Solution versus Colonic Hydrotherapy for Bowel Preparation before Colonoscopy: A Single Center, Randomized, and Controlled Study

    Science.gov (United States)

    Cao, Yan; Zhang, Kai-Yuan; Li, Jiao; Lu, Hao; Xie, Wan-Ling; Liao, Sheng-Tao; Chen, Dong-Feng; Zeng, Deng-Feng; Lan, Chun-Hui

    2014-01-01

    This single center, randomized, and controlled study aimed to compare the effectiveness and safety of polyethylene glycol electrolyte lavage (PEG-EL) solution and colonic hydrotherapy (CHT) for bowel preparation before colonoscopy. A total of 196 eligible outpatients scheduled for diagnostic colonoscopy were randomly assigned to the PEG-EL (n = 102) or CHT (n = 94) groups. Primary outcome measures included colonic cleanliness and adverse effects. Secondary outcome measures were patient satisfaction and preference, colonoscopic findings, ileocecal arrival rate, examiner satisfaction, and cecal intubation time. The results show that PEG-EL group was associated with significantly better colonic cleanliness than CHT group, fewer adverse effects, and increased examiner satisfaction. However, the CHT group had higher patient satisfaction and higher diverticulosis detection rates. Moreover, the results showed the same ileocecal arrival rate and patient preference between the two groups (P > 0.05). These findings indicate that PEG-EL is the preferred option in patients who followed the preparation instructions completely. PMID:24995014

  14. Concentrated Solutions of Single-Chain Nanoparticles: A Simple Model for Intrinsically Disordered Proteins under Crowding Conditions.

    Science.gov (United States)

    Moreno, Angel J; Lo Verso, Federica; Arbe, Arantxa; Pomposo, José A; Colmenero, Juan

    2016-03-03

    By means of large-scale computer simulations and small-angle neutron scattering (SANS), we investigate solutions of single-chain nanoparticles (SCNPs), covering the whole concentration range from infinite dilution to melt density. The analysis of the conformational properties of the SCNPs reveals that these synthetic nano-objects share basic ingredients with intrinsically disordered proteins (IDPs), as topological polydispersity, generally sparse conformations, and locally compact domains. We investigate the role of the architecture of the SCNPs in their collapse behavior under macromolecular crowding. Unlike in the case of linear macromolecules, which experience the usual transition from self-avoiding to Gaussian random-walk conformations, crowding leads to collapsed conformations of SCNPs resembling those of crumpled globules. This behavior is already found at volume fractions (about 30%) that are characteristic of crowding in cellular environments. The simulation results are confirmed by the SANS experiments. Our results for SCNPs--a model system free of specific interactions--propose a general scenario for the effect of steric crowding on IDPs: collapse from sparse conformations at high dilution to crumpled globular conformations in cell environments.

  15. Single and binary adsorption of heavy metal ions from aqueous solutions using sugarcane cellulose-based adsorbent.

    Science.gov (United States)

    Wang, Futao; Pan, Yuanfeng; Cai, Pingxiong; Guo, Tianxiang; Xiao, Huining

    2017-10-01

    A high efficient and eco-friendly sugarcane cellulose-based adsorbent was prepared in an attempt to remove Pb 2+ , Cu 2+ and Zn 2+ from aqueous solutions. The effects of initial concentration of heavy metal ions and temperature on the adsorption capacity of the bioadsorbent were investigated. The adsorption isotherms showed that the adsorption of Pb 2+ , Cu 2+ and Zn 2+ followed the Langmuir model and the maximum adsorptions were as high as 558.9, 446.2 and 363.3mg·g -1 , respectively, in single component system. The binary component system was better described with the competitive Langmuir isotherm model. The three dimensional sorption surface of binary component system demonstrated that the presence of Pb 2+ decreased the sorption of Cu 2+ , but the adsorption amount of other metal ions was not affected. The result from SEM-EDAX revealed that the adsorption of metal ions on bioadsorbent was mainly driven by coordination, ion exchange and electrostatic association. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Contribution of a solute atoms in the relaxation phenomenon at high temperature in Cu-Al single crystal alloys

    Science.gov (United States)

    Belamri, C.; Belhas, S.; Rivière, A.

    2009-11-01

    Two Cu-Al single crystals with 7 and 14 at. % Al respectively have been studied using isothermal mechanical spectroscopy (IMS) technique. After a 1% cold work by torsion, the samples have been progressively heated to 1140 K and then cooled until room temperature. IMS experiments allow to compare the isothermal internal friction spectra obtained during the heating (in this case, the annealing temperature is equal to the temperature of measurement) with the measurements performed at various temperature during the cooling after the annealing at 1140 K. Three relaxation peaks were observed. The first one at about 0.4 TM (TM: melting point) is a Zener relaxation peak (PZ) due to the reorientation under constraint of pairs of aluminium atoms. The high temperature annealing does not influence PZ. At about 0.6TM, a peak (P1) related to a dislocation mechanism is evidenced. The relaxation strength of P1 peak decreases with the temperature and a new relaxation peak (P2) is progressively developed. The IMS spectra obtained during the cooling evidenced only P2. The relaxation parameters obtained by the Arrhenius plots and the evolution with the annealing temperature allow to assign P1 and P2 to an interaction between the dislocations and the solute atoms according to the Darinskiy model.

  17. Study of the reaction between methyl 4-nitrobenzenesulfonate and bromide ions in mixed single-chain-gemini micellar solutions: kinetic evidence for morphological transitions.

    Science.gov (United States)

    del Mar Graciani, María; Rodríguez, Amalia; Moyá, María Luisa

    2008-12-15

    The reaction between methyl 4-nitrobenzenesulfonate and bromide ions has been studied in mixed single-chain-gemini micellar solutions of n-dodecyltrimethylammonium bromide, DTAB, and dodecyl tricosaoxyethylene glycol ether, Brij(35), with alkanediyl-alpha-omega-bis(dodecyldimethylammonium) bromide, 12-s-12,2Br(-) (s=3,4,5). Kinetic micellar effects show that an increase in the solution mole fraction of the single-chain surfactant, X(single-chain), results in a diminution of the mixed micelles tendency to form spherocylindrical aggregates upon increasing surfactant concentration. The dependence of the surfactant concentration at which the sphere-to-rod transition occurs, C(*), on X(single-chain) showed through kinetic data was in agreement with results obtained by means of fluorescence measurements.

  18. DORIS data analysis at Geodetic Observatory Pecný using single-satellite and multi-satellite geodetic solutions

    Science.gov (United States)

    Štěpánek, Petr; Douša, Jan; Filler, Vratislav; Hugentobler, Urs

    2010-12-01

    dependence on several factors are discussed. A significant DORIS-GNSS bias was detected when processing SPOT-5 data for the South American stations Santiago, Cachoeira Paulista and Arequipa. The location of these stations is close to the South Atlantic Anomaly (SAA). An important effect of SAA on the DORIS observation noise is well known from Jason-1 data, but it has not been detected for any other satellite yet. Additional tests of the estimated station coordinates and the beacon frequency offsets, based on single-satellite solutions, confirm the possible relation between the SPOT-5 bias and the SAA.

  19. Analysis of the detection of organophosphate pesticides in aqueous solutions using polymer-coated single IDT sensors

    Science.gov (United States)

    McCarthy, Michael

    The single interdigital transducer (IDT) device was investigated as a micro-chemical sensor for the detection of organophosphates compounds in aqueous solutions. The compounds of interest are: parathion, parathion-methyl, and paraoxon. The polymers used as a partially-selective coating for the direct detection of these compounds are 2,2'-diallylbisphenol A- 1,1,3,3,5,5-hexamethyltrisiloxane (BPA-HMTS) and polyepichlorohydrin (PECH). BPA-HMTS is synthesized here at Marquette University. The measurement of interest for the single IDT is the change radiation resistance. The radiation resistance represents the energy stored in the propagating acoustic wave. As analyte absorbs into the polymer coating, changes in the film's properties will undergo resulting in a change in the radiation resistance i.e the acoustic wave properties. The film's properties changing include: added mass, viscoelastic properties, thickness, and dielectric properties. These properties will contribute to an overall change in the radiation resistance. A linear change in the radiation resistance is expected to occur for increasing concentrations of an organophosphate. The experimental results indicate that BPA-HMTS shows greater sensitivity towards the organophosphates than PECH. Both polymers showed greatest to lowest sensitivity to parathion, parathion-methyl, and paraoxon respectively. Thicker films tested for both polymers, 0.75μm thick, show a higher response due to a more pronounced effect of mass loading than the thinner films tested, 0.50μm. The response times for BPA-HMTS were much faster than for PECH. Both films showed fastest to slowest response time to paraoxon, parathion-methyl, and parathion respectively. The sensor is tested for reproducibility for the polymer BP-HMTS. A sensor array consisting of separately tested devices from this work as well as work done by a previous student is utilized to increase the selectivity of the three organophosphates. Radial plots are performed for

  20. On the existence and uniqueness problems of solutions for set-valued and single-valued nonlinear operator equations in probabilistic normed spaces

    Directory of Open Access Journals (Sweden)

    Shih-Sen Chang

    1994-01-01

    Full Text Available In this paper, we introduce the concept of more general probabilistic contractors in probabilistic normed spaces and show the existence and uniqueness of solutions for set-valued and single-valued nonlinear operator equations in Menger probabilistic normed spaces.

  1. Effervescent N-Acetylcysteine Tablets versus Oral Solution N-Acetylcysteine in Fasting Healthy Adults: An Open-Label, Randomized, Single-Dose, Crossover, Relative Bioavailability Study

    Directory of Open Access Journals (Sweden)

    Spencer C. Greene, MD, FACEP, FACMT

    2016-01-01

    Conclusions: Data from this study of a single dose of 11 g oral NAC demonstrated that effervescent NAC tablets and oral solution NAC met the regulatory criteria for bioequivalence in fasting healthy adult subjects. Effervescent NAC tablets appear to be a more palatable alternative for treatment of acetaminophen overdose. ClinicalTrials.gov identifier: NCT02723669.

  2. Studies on the concentration dependence of specific rotation of Alpha lactose monohydrate (α-LM) aqueous solutions and growth of α-LM single crystals

    Science.gov (United States)

    Vinodhini, K.; Divya Bharathi, R.; Srinivasan, K.

    2018-02-01

    Lactose is an optically active substance. As it is one of the reducing sugars, exhibits mutarotation in solution when it dissolves in any solvent. In solution, lactose exists in two isomeric forms, alpha-Lactose (α-L) and beta-lactose (β-L) through the mutarotation reaction. Mutarotation produces a dynamic equilibrium between two isomers in a solution and kinetics of this process determines the growth rate of alpha lactose monohydrate (α-LM) crystals. Since no data were available on the specific rotation of aqueous α-LM solutions at different concentrations at 33 °C, the initial experiments were carried out on the specific rotation of aqueous α-LM solutions at different concentrations at 33 °C. The specific rotations of the solutions were decreased with increasing time through the mutarotation reaction. The initial and final (equilibrium) specific rotations of the solutions were determined by using automatic digital polarimeter. The compositions of α and β-L in all prepared solutions were calculated from initial and final optical rotations by the method of Sharp and Doob. The composition of α-L decreased whereas, the composition of β-L increased in solutions with increasing concentration of α-LM at 33 °C. Experimental results revealed that this method could be easily and safely employed to study the dependence of specific rotation of solutions on their concentration. The effect of β-lactose on the morphology of nucleated α-LM single crystals has been studied at different experimental conditions.

  3. Single and competitive adsorption of Cd(II and Pb(II ions from aqueous solutions onto industrial chili seeds (Capsicum annuum waste

    Directory of Open Access Journals (Sweden)

    Nahum A. Medellin-Castillo

    2017-03-01

    Full Text Available In this work, the single and binary adsorption of Cd(II and Pb(II onto industrial chili seeds (CS (Capsicum annuum from aqueous solutions was investigated as a possible low-cost biosorbent for the removal of toxic heavy metals from aqueous solutions. The dependence of the adsorption capacity of CS on the solution pH and temperature, and the presence of competitive metal were also studied in detail. The adsorption equilibrium experiments of Cd(II and Pb(II on CS were conducted in a batch adsorber. The Freundlich and Langmuir isotherm models were fitted to the single adsorption equilibrium data and the latter provided a better fit. Moreover, it was found that the adsorption capacity of CS towards Cd(II and Pb(II ions was greatly increased by increasing the solution pH. The effect of the pH was attributed to the electrostatic interaction between the negatively charged CS surface and the Cd2+ and Pb2+ cations in the aqueous solution. The adsorption capacity was slightly increased by raising the temperature because the adsorption of Cd(II or Pb(II ions on CS was an endothermic process. The experimental binary adsorption data were satisfactorily interpreted using the modified Langmuir multicomponent isotherm and the competitive adsorption of Cd(II-Pb(II on CS revealed that the affinity of Pb(II for CS was more than 5 times higher than that of Cd(II.

  4. 77 FR 33740 - Announcement of Requirements and Registration for “Health Data Platform Simple Sign-On Challenge”

    Science.gov (United States)

    2012-06-07

    ... Data Platform Simple Sign-On Challenge'' AGENCY: Office of the National Coordinator for Health... creativity of entrepreneurs and productivity of developers. The ``Health Data Platform Simple Sign-On... winner will present a replicable open source virtual machine environment demonstrating how HDP components...

  5. [Effect of Cr (VI) anions on the Cu (II) adsorption behavior of two kinds of clay minerals in single and binary solution].

    Science.gov (United States)

    Liu, Juan-Juan; Liang, Dong-Li; Wu, Xiao-Long; Qu, Guang-Zhou; Qian, Xun

    2014-01-01

    The adsorption of Cu (II) on kaolinite and montmorillonite was investigated through batch adsorption experiment. Several adsorption models were employed to describe the adsorption of Cu (II) on the two clay minerals in single Cu (II) and Cu(II)-Cr (VI) binary solutions, and the impact of solution with various pH values on the adsorption of Cu (II) on the two target mineral clays was investigated in order to explain the environmental chemical behavior of heavy metals in soil and to provide theoretical basis in remediation of multi-element contaminated soil. The results indicated that the adsorption process of Cu (II) on kaolinite and montmorillonite in both single and binary solutions was fast at the beginning and then slowed down. Adsorption equilibrium was observed within 120 min. In both single and binary solutions, pseudo-second-order model (R2 > 0.983) showed the highest agreement with the adsorption of Cu (II) on the two mineral clays, followed by the intra-particle diffusion model and pseudo-first-order model. Both Intra-particle diffusion model and Boyd model illustrated that the film diffusion process was the rate-limiting step, which mainly occurred at the edge and surface of mineral clays. Copper adsorption on kaolinite was well fitted with the Freundlich equation (R2 > 0.971), which could be attributed to the heterogeneity of kaolinite surface with adsorption sites that have different energies of adsorption. Langmuir equation was best fitted with the isotherm for montmorillonite (R2 > 0.983), which indicated that the adsorption was on a single molecular layer or chemisorptions. In both single and binary solutions, the adsorption of Cu (II ) on the two clay minerals first increased and then decreased with the rising of pH values. The maximum adsorption amount was found at pH = 5.0, and was in the order of Qmon. > Qkao. and Q(Single-Cu) > Q(Cu-Cr binary). Cr (VI) in the solution reduced the adsorption of Cu (II), and the minimal influence of Cr (VI) on Cu

  6. A rich solution spray as a refining method in a small capacity, single effect, solar assisted absorption machine with the pair NH3/H2O: Experimental results

    International Nuclear Information System (INIS)

    Mendes, L.F.; Collares-Pereira, M.; Ziegler, F.

    2007-01-01

    Ammonia vapour refining is a common procedure in ammonia-water absorption machines. A solar assisted single effect absorption machine that uses the pair ammonia-water was developed and tested. Its desorber has a built-in adiabatic refining column constituted by a rich solution spray. The refining method proved its feasibility. The spray provided a more or less constant ammonia vapour enrichment of about 1% which is enough for the working temperature ranges of this type of machine. It was also verified that the refining effect of the spray is almost independent of the refrigerant vapour and solution mass flow rates

  7. Salt Dependence of the Radius of Gyration and Flexibility of Single-stranded DNA in Solution probed by Small-angle X-ray Scattering

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Adelene Y.L.; Lipfert, Jan; Herschlag, Daniel; Doniach, Sebastian

    2012-07-06

    Short single-stranded nucleic acids are ubiquitous in biological processes and understanding their physical properties provides insights to nucleic acid folding and dynamics. We used small angle x-ray scattering to study 8-100 residue homopolymeric single-stranded DNAs in solution, without external forces or labeling probes. Poly-T's structural ensemble changes with increasing ionic strength in a manner consistent with a polyelectrolyte persistence length theory that accounts for molecular flexibility. For any number of residues, poly-A is consistently more elongated than poly-T, likely due to the tendency of A residues to form stronger base-stacking interactions than T residues.

  8. Quasichemical theory and the description of associating fluids relative to a reference: Multiple bonding of a single site solute

    Science.gov (United States)

    Bansal, Artee; Chapman, Walter G.; Asthagiri, D.

    2017-09-01

    We derive an expression for the chemical potential of an associating solute in a solvent relative to the value in a reference fluid using the quasichemical organization of the potential distribution theorem. The fraction of times the solute is not associated with the solvent, the monomer fraction, is expressed in terms of (a) the statistics of occupancy of the solvent around the solute in the reference fluid and (b) the Widom factors that arise because of turning on solute-solvent association. Assuming pair-additivity, we expand the Widom factor into a product of Mayer f-functions and the resulting expression is rearranged to reveal a form of the monomer fraction that is analogous to that used within the statistical associating fluid theory (SAFT). The present formulation avoids all graph-theoretic arguments and provides a fresh, more intuitive, perspective on Wertheim's theory and SAFT. Importantly, multi-body effects are transparently incorporated into the very foundations of the theory. We illustrate the generality of the present approach by considering examples of multiple solvent association to a colloid solute with bonding domains that range from a small patch on the sphere to a Janus particle to a solute whose entire surface is available for association.

  9. del Nido versus St. Thomas Cardioplegia Solutions: A Single-Center Retrospective Analysis of Post Cross-Clamp Defibrillation Rates.

    Science.gov (United States)

    Buel, Shane T; Striker, Carrie Whittaker; O'Brien, James E

    2016-06-01

    There are many cardioplegia solutions currently in use for pediatric cardiopulmonary bypass (CPB). The most common being del Nido solution. Another common cardioplegia solution used for pediatric CPB is St. Thomas. In October 2014, Children's Mercy Kansas City changed from the use of modified St. Thomas to del Nido. This study compared rates of post cross-clamp fibrillation requiring defibrillation between del Nido solution and modified St. Thomas solution stratified by weight at Children's Mercy Kansas City. This retrospective study consisted of 394 patients who underwent cardiac surgery requiring cardioplegia between January 1, 2014 and July 31, 2015. The outcome measured was defibrillation upon cross-clamp removal. Statistical significance was determined using Fishers exact test with a two-sided significance level of .05. Incidence of defibrillation post cross-clamp removal was 4.4% in the del Nido group and 26.8% in the St. Thomas group (p Thomas group (p Thomas group (p Thomas group (p 60-kg category had an incidence of defibrillation of 16.7% in the del Nido group and 63% in the St. Thomas group (p Thomas and del Nido cardioplegia solutions. Analyses of weight stratifications demonstrate a decrease in the rate of defibrillation post cross-clamp removal in all categories within the del Nido group.

  10. First TRUE Stage - Transport of solutes in an interpreted single fracture. Proceedings from the 4th international seminar

    International Nuclear Information System (INIS)

    2001-08-01

    The First Stage of the Tracer Retention Understanding Experiments (TRUE-1) was initiated in 1994 and the experimental activities were officially concluded in December 1998 with the termination of the final test with radioactive sorbing tracers. The programme also included a laboratory programme focused on both generic (Aespoe HRL) and site-specific (Feature A) geological material. Modelling, both scopings, predictions and evaluation of the final tests with sorbing tracers has been performed parallel to the experimental work. The work and conclusions of the SKB TRUE project team have been published in a SKB technical report. The TRUE-1 experiments have also been subject to blind prediction and evaluation by an international group of modelling teams within the auspices of the Aespoe Task Force on Groundwater on Modelling of Groundwater Flow and Solute Transport. A list of relevant reports and publications related to the First TRUE Stage are presented in Appendix A. The present seminar provides a venue to present and discuss the results of the TRUE-1 experiments in terms of identified transport and retention processes and concepts/approaches used to model. However, given the fact that may international programs, including that of SKB, are either underway or preparing for site characterisation programs, the seminar provides a possibility to discuss research priorities and the specific data needs for development of a geological repository. In his opening address, the director of the Aespoe Hard Rock Laboratory emphasised the need to carefully integrate available experience from other research sites, e.g. Grimsel (Switzerland), Stripa (Sweden) and El Berrocal (Spain). The two important questions to be asked are; What do we know? What is the way forward? For the subsequent discussions four different discussion themes were identified; 1. Identification of transport processes. 2. Model concepts. 3. Site-specific data needs for a geological repository. 4. Research priorities

  11. Solution structure of the single-domain prolyl cis/trans isomerase PIN1At from Arabidopsis thaliana.

    Science.gov (United States)

    Landrieu, Isabelle; Wieruszeski, Jean-Michel; Wintjens, René; Inzé, Dirk; Lippens, Guy

    2002-07-05

    The 119-amino acid residue prolyl cis/trans isomerase from Arabidopsis thaliana (PIN1At) is similar to the catalytic domain of the human hPIN1. However, PIN1At lacks the N-terminal WW domain that appears to be essential for the hPIN1 function. Here, the solution structure of PIN1At was determined by three-dimensional nuclear magnetic resonance spectroscopy. The PIN1At fold could be superimposed on that of the catalytic domain of hPIN1 and had a 19 residue flexible loop located between strand beta1 and helix alpha1. The dynamical features of this beta1/alpha1-loop, which are characteristic for a region involved in protein-protein interactions, led to exchange broadening in the NMR spectra. When sodium sulfate salt was added to the protein sample, the beta1/alpha1 loop was stabilized and, hence, a complete backbone resonance assignment was obtained. Previously, with a phospho-Cdc25 peptide as substrate, PIN1At had been shown to catalyze the phosphoserine/phosphothreonine prolyl cis/trans isomerization specifically. To map the catalytic site of PIN1At, the phospho-Cdc25 peptide or sodium sulfate salt was added in excess to the protein and chemical shift changes in the backbone amide protons were monitored in the (1)H(N)-(15)N heteronuclear single quantum coherence spectrum. The peptide caused perturbations in the loops between helix alpha4 and strand beta3, between strands beta3 and beta4, in the alpha3 helix, and in the beta1/alpha1 loop. The amide groups of the residues Arg21 and Arg22 showed large chemical shift perturbations upon phospho-Cdc25 peptide or sulfate addition. We conclude that this basic cluster formed by Arg21 and Arg22, both located in the beta1/alpha1 loop, is homologous to that found in the hPIN1 crystal structure (Arg68 and Arg69), which also is involved in sulfate ion binding. We showed that the sulfate group competed for the interaction between PIN1At and the phospho-Cdc25 peptide. In the absence of the WW domain, three hydrophobic residues (Ile

  12. The "Dot in Circle" Sign on MRI in Maduramycosis: A Characteristic Finding

    Directory of Open Access Journals (Sweden)

    Vikash Jain

    2012-01-01

    Full Text Available Mycetoma or Maduramycosis is a localized chronic suppurative infection characterized by exuberant granulation tissue, discharging sinuses, and bone involvement later in the course of the disease. Early clinical diagnosis before the appearance of sinuses and grains (aggregates of organism surrounded by granulation tissue, which are discharged from the draining sinuses is difficult. Delay in diagnosis may lead to amputation of the affected part. Definitive diagnosis is through biopsy and microbiological examination. However, at times diagnosis may still be difficult. The recently described "dot in circle" sign on magnetic resonance imaging (MRI is easy to recognize and highly specific. We present a case of mycetoma foot with characteristic MRI features.

  13. New Factorization Techniques and Parallel (log N) Algorithms for Forward Dynamics Solution of Single Closed-Chain Robot Manipulators

    Science.gov (United States)

    Fijany, Amir

    1993-01-01

    In this paper parallel 0(log N) algorithms for dynamic simulation of single closed-chain rigid multibody system as specialized to the case of a robot manipulatoar in contact with the environment are developed.

  14. A statistical analysis of the impact of advertising signs on road safety.

    Science.gov (United States)

    Yannis, George; Papadimitriou, Eleonora; Papantoniou, Panagiotis; Voulgari, Chrisoula

    2013-01-01

    This research aims to investigate the impact of advertising signs on road safety. An exhaustive review of international literature was carried out on the effect of advertising signs on driver behaviour and safety. Moreover, a before-and-after statistical analysis with control groups was applied on several road sites with different characteristics in the Athens metropolitan area, in Greece, in order to investigate the correlation between the placement or removal of advertising signs and the related occurrence of road accidents. Road accident data for the 'before' and 'after' periods on the test sites and the control sites were extracted from the database of the Hellenic Statistical Authority, and the selected 'before' and 'after' periods vary from 2.5 to 6 years. The statistical analysis shows no statistical correlation between road accidents and advertising signs in none of the nine sites examined, as the confidence intervals of the estimated safety effects are non-significant at 95% confidence level. This can be explained by the fact that, in the examined road sites, drivers are overloaded with information (traffic signs, directions signs, labels of shops, pedestrians and other vehicles, etc.) so that the additional information load from advertising signs may not further distract them.

  15. A low-cost single-board solution for real-time, unsupervised waveform classification of multineuron recordings.

    Science.gov (United States)

    Kreiter, A K; Aertsen, A M; Gerstein, G L

    1989-10-01

    We describe a low-cost single-board system for unsupervised, real-time spike sorting of recordings from a number of neurons on a single microelectrode. The maximum number of spike classes depends on the quality of the recording; it will typically be between 2 and 5. The spike sorter communicates with a conventional microcomputer through a standard serial port (RS232). For typical firing rates as measured in the mammalian central nervous system, this set-up will accommodate up to some 10 parallel spike sorters for as many separate microelectrodes.

  16. New representation of water activity based on a single solute specific constant to parameterize the hygroscopic growth of aerosols in atmospheric models

    Directory of Open Access Journals (Sweden)

    S. Metzger

    2012-06-01

    Full Text Available Water activity is a key factor in aerosol thermodynamics and hygroscopic growth. We introduce a new representation of water activity (aw, which is empirically related to the solute molality (μs through a single solute specific constant, νi. Our approach is widely applicable, considers the Kelvin effect and covers ideal solutions at high relative humidity (RH, including cloud condensation nuclei (CCN activation. It also encompasses concentrated solutions with high ionic strength at low RH such as the relative humidity of deliquescence (RHD. The constant νi can thus be used to parameterize the aerosol hygroscopic growth over a wide range of particle sizes, from nanometer nucleation mode to micrometer coarse mode particles. In contrast to other aw-representations, our νi factor corrects the solute molality both linearly and in exponent form x · ax. We present four representations of our basic aw-parameterization at different levels of complexity for different aw-ranges, e.g. up to 0.95, 0.98 or 1. νi is constant over the selected aw-range, and in its most comprehensive form, the parameterization describes the entire aw range (0–1. In this work we focus on single solute solutions. νi can be pre-determined with a root-finding method from our water activity representation using an aw−μs data pair, e.g. at solute saturation using RHD and solubility measurements. Our aw and supersaturation (Köhler-theory results compare well with the thermodynamic reference model E-AIM for the key compounds NaCl and (NH42SO4 relevant for CCN modeling and calibration studies. Envisaged applications include regional and global atmospheric chemistry and

  17. Solution of ODE u + p(u)(u')2 + q(u) = 0 and Applications to Classifications of All Single Travelling Wave Solutions to Some Nonlinear Mathematical Physics Equations

    International Nuclear Information System (INIS)

    Liu Chengshi

    2008-01-01

    Under the travelling wave transformation, some nonlinear partial differential equations such as Camassa-Holm equation, High-order KdV equation, etc, are reduced to an integrable ODE expressed by u + p(u)(u') 2 + q(u) = 0 whose general solution can be given. Furthermore, combining complete discrimination system for polynomial, the classifications of all single travelling wave solutions to these equations are obtained. The equation u + p(u)(u') 2 + q(u) = 0 includes the equation (u') 2 = f(u) as a special case, so the proposed method can be also applied to a large number of nonlinear equations. These complete results cannot be obtained by any indirect method.

  18. Effectiveness of a single application of 0·25% fipronil solution for the treatment of hirstiellosis in captive green iguanas (Iguana iguana): an open-label study.

    Science.gov (United States)

    Farmaki, Rania; Simou, Chrisa; Papadopoulos, Elias; Koutinas, Alexander F; Saridomichelakis, Manolis N

    2013-08-01

    Hirstiella spp. are common ectoparasites of captive green iguanas (Iguana iguana). Suggested treatments are empirical and some of them are of low efficacy and potentially toxic. The objective of this open-label study was to investigate the short-term efficacy and safety of a single application of 0·25% fipronil solution for the treatment of hirstiellosis. The skin of 50 green iguanas was thoroughly examined with the aid of bright light and magnifying lenses. A total of 21 iguanas were found to be infested, harbouring 1-24 mites (median: 5). All 35 mites collected from 17 iguanas were identified as Hirstiella sp. Both infested and non-infested lizards, sharing the same enclosure, were carefully wiped with 0·25% fipronil solution. The safety and the efficacy of the treatment were evaluated after 2 days in 47/50 (94%) and 7 days in 29/50 (58%) iguanas. Compared with pre-treatment levels, the parasitic load did not changed significantly on the second day but was significantly lower on day 7 (P = 0·006). No adverse reactions were noticed. Based on these results a single whole-body application of 0·25% fipronil solution can be considered a safe and effective treatment for the reduction of parasitic burden in captive green iguanas infested by Hirstiella sp. mites.

  19. Sm-doped CeO{sub 2} single buffer layer for YBCO coated conductors by polymer assisted chemical solution deposition (PACSD) method

    Energy Technology Data Exchange (ETDEWEB)

    Li, G.; Pu, M.H.; Sun, R.P.; Wang, W.T.; Wu, W.; Zhang, X.; Yang, Y. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu 610031 (China); Cheng, C.H. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney, 2052 NSW (Australia); Zhao, Y. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney, 2052 NSW (Australia)], E-mail: yzhao@home.swjtu.edu.cn

    2008-10-20

    An over 150 nm thick Sm{sub 0.2}Ce{sub 0.8}O{sub 1.9-x} (SCO) single buffer layer has been deposited on bi-axially textured NiW (2 0 0) alloy substrate. Highly in-plane and out-of-plane oriented, dense, smooth and crack free SCO single layer has been obtained via a polymer-assisted chemical solution deposition (PACSD) approach. YBCO thin film has been deposited equally via a PACSD route on the SCO-buffered NiW, the as grown YBCO yielding a sharp transition at T{sub c0} = 87 K as well as J{sub c}(0 T, 77 K) {approx} 1 MA/cm{sup 2}. These results indicates that RE (lanthanides other than Ce) doping may be an effective approach to improve the critical thickness of solution derived CeO{sub 2} film, which renders it a promising candidate as single buffer layer for YBCO coated conductors.

  20. Aqueous Chemical Solution Deposition of Novel, Thick and Dense Lattice-Matched Single Buffer Layers Suitable for YBCO Coated Conductors: Preparation and Characterization

    Directory of Open Access Journals (Sweden)

    Isabel van Driessche

    2012-09-01

    Full Text Available In this work we present the preparation and characterization of cerium doped lanthanum zirconate (LCZO films and non-stoichiometric lanthanum zirconate (LZO buffer layers on metallic Ni-5% W substrates using chemical solution deposition (CSD, starting from aqueous precursor solutions. La2Zr2O7 films doped with varying percentages of Ce at constant La concentration (La0.5CexZr1−xOy were prepared as well as non-stoichiometric La0.5+xZr0.5−xOy buffer layers with different percentages of La and Zr ratios. The variation in the composition of these thin films enables the creation of novel buffer layers with tailored lattice parameters. This leads to different lattice mismatches with the YBa2Cu3O7−x (YBCO superconducting layer on top and with the buffer layers or substrate underneath. This possibility of minimized lattice mismatch should allow the use of one single buffer layer instead of the current complicated buffer architectures such as Ni-(5% W/LZO/LZO/CeO2. Here, single, crack-free LCZO and non-stoichiometric LZO layers with thicknesses of up to 140 nm could be obtained in one single CSD step. The crystallinity and microstructure of these layers were studied by XRD, and SEM and the effective buffer layer action was studied using XPS depth profiling.

  1. Client Hardware-Token Based Single Sign-On over Several Servers without Trusted Online Third Party Server

    Science.gov (United States)

    Wefel, Sandro; Molitor, Paul

    User authentication in most systems is done by the principle: registration with unique user name and presentation of a secret, e. g., a password or a private cryptographic key, respectively. To obtain a trustworthy method, combinations of hardware token with user certificates and keys secured by a PIN have to be applied.

  2. Electronic setup for fluorescence emission measurements and long-time constant-temperature maintenance of Single-Walled Carbon Nano-Tubes in water solutions

    Directory of Open Access Journals (Sweden)

    De Rosa Matteo

    2017-03-01

    Full Text Available In our previous research we have observed that the fluorescence emission from water solutions of Single-Walled Carbon Nano-Tubes (SWCNT, excited by a laser with a wavelength of 830nm, diminishes with the time. We have already proved that such a fading is a function of the storage time and the storage temperature. In order to study the emission of the SWCNT as a function of these two parameters we have designed and realized a special measurement compartment with a cuvette holder where the SWCNT solutions can be measured and stored at a fixed constant temperature for periods of time as long as several weeks. To maintain the measurement setup under a constant temperature we have designed special experimental setup based on two Peltier cells with electronic temperature control.

  3. An esthetic solution for single-implant restorations - type III porcelain veneer bonded to a screw-retained custom abutment: a clinical report.

    Science.gov (United States)

    Magne, Pascal; Magne, Michel; Jovanovic, Sascha A

    2008-01-01

    A new esthetic solution to restore dental implants in combination with limited interdental, facial or labial, or interocclusal space is presented. This article describes the translational application of novel-design porcelain veneers and adhesive restorative principles in the implant realm. A patient is presented who was treated with a single implant-supported restoration replacing a missing mandibular lateral incisor and partially collapsed interdental space. A screw-retained custom metal ceramic abutment was combined with a bonded porcelain restoration. This unique design was motivated by the limited restorative space and subgingival implant shoulder. It was also developed as a solution to the interference of the screw-access channel with the incisal edge, therefore providing the surgeon with more options during implant axis selection. The porcelain-to-porcelain adhesive approach was used instead of traditional principles of retention and resistance form of the abutment.

  4. Removal of Ni(II), Zn(II) and Pb(II) ions from single metal aqueous solution using rice husk-based activated carbon

    Energy Technology Data Exchange (ETDEWEB)

    Taha, Mohd F., E-mail: faisalt@petronas.com.my; Shaharun, Maizatul S. [Fundamental and Applied Sciences Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750, Perak Darul Ridzuan (Malaysia); Shuib, Anis Suhaila, E-mail: anisuha@petronas.com.my; Borhan, Azry [Chemical Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750, Perak Darul Ridzuan (Malaysia)

    2014-10-24

    An attempt was made to investigate the potential of rice husk-based activated carbon as an alternative low-cost adsorbent for the removal of Ni(II), Zn(II) and Pb(II) ions from single aqueous solution. Rice husk-based activated carbon was prepared via treatment of rice husk with NaOH followed by the carbonization process at 400°C for 2 hours. Three samples, i.e. raw rice husk, rice husk treated with NaOH and rice husk-based activated carbon, were analyzed for their morphological characteristics using field-emission scanning electron microscope/energy dispersive X-ray (FESEM/EDX). These samples were also analyzed for their carbon, hydrogen, nitrogen, oxygen and silica contents using CHN elemental analyzer and FESEM/EDX. The porous properties of rice husk-based activated carbon were determined by Brunauer-Emmett-Teller (BET) surface area analyzer, and its surface area and pore volume were 255 m{sup 2}/g and 0.17 cm{sup 2}/g, respectively. The adsorption studies for the removal of Ni(II), Zn(II) and Pb(II) ions from single metal aqueous solution were carried out at a fixed initial concentration of metal ion (150 ppm) with variation amount of adsorbent (rice husk-based activated carbon) as a function of varied contact time at room temperature. The concentration of each metal ion was analyzed using atomic absorption spectrophotometer (AAS). The results obtained from adsorption studies indicate the potential of rice husk as an economically promising precursor for the preparation of activated carbon for removal of Ni(II), Zn(II) and Pb(II) ions from single aqueous solution. Isotherm and kinetic model analyses suggested that the experimental data of adsorption studies fitted well with Langmuir, Freundlich and second-order kinetic models.

  5. Poisson-Fermi modeling of ion activities in aqueous single and mixed electrolyte solutions at variable temperature

    Science.gov (United States)

    Liu, Jinn-Liang; Eisenberg, Bob

    2018-02-01

    The combinatorial explosion of empirical parameters in tens of thousands presents a tremendous challenge for extended Debye-Hückel models to calculate activity coefficients of aqueous mixtures of the most important salts in chemistry. The explosion of parameters originates from the phenomenological extension of the Debye-Hückel theory that does not take steric and correlation effects of ions and water into account. By contrast, the Poisson-Fermi theory developed in recent years treats ions and water molecules as nonuniform hard spheres of any size with interstitial voids and includes ion-water and ion-ion correlations. We present a Poisson-Fermi model and numerical methods for calculating the individual or mean activity coefficient of electrolyte solutions with any arbitrary number of ionic species in a large range of salt concentrations and temperatures. For each activity-concentration curve, we show that the Poisson-Fermi model requires only three unchanging parameters at most to well fit the corresponding experimental data. The three parameters are associated with the Born radius of the solvation energy of an ion in electrolyte solution that changes with salt concentrations in a highly nonlinear manner.

  6. Solute transport in a single fracture involving an arbitrary length decay chain with rock matrix comprising different geological layers.

    Science.gov (United States)

    Mahmoudzadeh, Batoul; Liu, Longcheng; Moreno, Luis; Neretnieks, Ivars

    2014-08-01

    A model is developed to describe solute transport and retention in fractured rocks. It accounts for advection along the fracture, molecular diffusion from the fracture to the rock matrix composed of several geological layers, adsorption on the fracture surface, adsorption in the rock matrix layers and radioactive decay-chains. The analytical solution, obtained for the Laplace-transformed concentration at the outlet of the flowing channel, can conveniently be transformed back to the time domain by the use of the de Hoog algorithm. This allows one to readily include it into a fracture network model or a channel network model to predict nuclide transport through channels in heterogeneous fractured media consisting of an arbitrary number of rock units with piecewise constant properties. More importantly, the simulations made in this study recommend that it is necessary to account for decay-chains and also rock matrix comprising at least two different geological layers, if justified, in safety and performance assessment of the repositories for spent nuclear fuel. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Activation energy for mobility of dyes and proteins in polymer solutions: from diffusion of single particles to macroscale flow.

    Science.gov (United States)

    Sozański, Krzysztof; Wiśniewska, Agnieszka; Kalwarczyk, Tomasz; Hołyst, Robert

    2013-11-27

    We measure the activation energy Ea for the diffusion of molecular probes (dyes and proteins of radii from 0.52 to 6.9 nm) and for macroscopic flow in a model complex liquid-aqueous solutions of polyethylene glycol. We cover a broad range of polymer molecular weights, concentrations, and temperatures. Fluorescence correlation spectroscopy and rheometry experiments reveal a relationship between the excess of the activation energy in polymer solutions over the one in pure solvent ΔEa and simple parameters describing the structure of the system: probe radius, polymer hydrodynamic radius, and correlation length. ΔEa varies by more than an order of magnitude in the investigated systems (in the range of ca. 1-15 kJ/mol) and for probes significantly larger than the polymer hydrodynamic radius approaches the value measured for macroscopic flow. We develop an explicit formula describing the smooth transition of ΔEa from the diffusion of molecular probes to macroscopic flow. This formula is a reference for the quantitative analysis of specific interactions of moving nano-objects with their environment as well as active transport. For instance, the power developed by a molecular motor moving at constant velocity u is proportional to u2exp(Ea/RT).

  8. Analytical solutions for a single vertical drain with time-dependent vacuum combined surcharge preloading in membrane and membraneless systems

    International Nuclear Information System (INIS)

    Geng, X Y; Indraratna, B; Rujikiatkamjorn, C

    2010-01-01

    Vertical drains combined with vacuum pressure and surcharge preloading are widely used to accelerate the consolidation process of soft clay in order to decrease the pore pressure as well as to increase the effective stress. Currently there are two types of vacuum preloading systems commercially available; (a) membrane system with an airtight membrane over the drainage layer and, (b) membraneless system where a vacuum system is connected to individual drain. Their effectiveness varies from site to site depending on the type of soil treated and the characteristics of the drain-vacuum system. This study presents the analytical solutions of vertical drains with vacuum preloading for both membrane and membraneless systems. According to the field and laboratory observations, the vacuum in both of the membraneless and membrane system was assumed to be decreasing along the drain whereas in the membrane system, it was maintained at a constant level. This model was verified by using the measured settlements and excess pore pressures obtained from large-scale laboratory testing and case studies in Australia. The analytical solutions improved the accuracy of predicting the dissipation of pore water pressure and the associated settlement. The effects of the permeability of the sand blanket in a membrane system and the possible loss of vacuum were also discussed.

  9. Performance of mango seed adsorbents in the adsorption of anthraquinone and azo acid dyes in single and binary aqueous solutions.

    Science.gov (United States)

    Dávila-Jiménez, Martín M; Elizalde-González, María P; Hernández-Montoya, Virginia

    2009-12-01

    In this study the husk of mango seed and two carbonaceous adsorbents prepared from it were used to study the adsorption behavior of eight acid dyes. The adsorbed amount in mmol m(-2) decayed asymptotically as the molecular volume and area increased. The interaction between the studied dyes and the mesoporous carbon was governed by the ionic species in solution and the acidic/basic groups on the surface. Less than 50% of the external surface of the microporous carbon became covered with the dyes molecules, though monolayer formation demonstrating specific interactions only with active sites on the surface and the adsorption magnitudes correlated with the shape parameter of the molecule within a particular dye group. The adsorption behavior in mixtures was determined by the molecular volume of the constituents; the greater the molecular volume difference, the greater the effect on the adsorbed amount. We also demonstrated that the raw husk of the mango seed can be used to remove up to 50% from model 50 mg l(-1) solutions of the studied acid dyes.

  10. Individual activity coefficients of single ionic species of alkaline earth halogenides, alkaline earth perchlorates, and uranyl perchlorate at 25 0C in aqueous solutions

    International Nuclear Information System (INIS)

    Ferse, A.

    1981-01-01

    The individual activity coefficients of the single ionic species of alkaline-earth haloides, alkaline earth perchlorates and uranylic perchlorate, resp., at 25 0 C in aqueous solution are calculated and presented up to the concentration of about m = 4 mol/kg. The individual activity coefficients of the alkaline-earth ions pass mostly as a function of the concentration through a steep minimum and decrease from Mg 2+ to Ba 2+ . The individual activity coefficients of the anions pass generally as a function of the concentration through a marked flat minimum, but they increase - the complex perchlorate ions excepted - only a little above 1. (author)

  11. Solution to the influence of the MSSW propagating velocity on the bandwidths of the single-scale wavelet-transform processor using MSSW device.

    Science.gov (United States)

    Lu, Wenke; Zhu, Changchun; Kuang, Lun; Zhang, Ting; Zhang, Jingduan

    2012-01-01

    The objective of this research was to investigate the possibility of solving the influence of the magnetostatic surface wave (MSSW) propagating velocity on the bandwidths of the single-scale wavelet transform processor using MSSW device. The motivation for this work was prompted by the processor that -3dB bandwidth varies as the propagating velocity of MSSW changes. In this paper, we present the influence of the magnetostatic surface wave (MSSW) propagating velocity on the bandwidths as the key problem of the single-scale wavelet transform processor using MSSW device. The solution to the problem is achieved in this study. we derived the function between the propagating velocity of MSSW and the -3dB bandwidth, so we know from the function that -3dB bandwidth of the single-scale wavelet transform processor using MSSW device varies as the propagating velocity of MSSW changes. Through adjusting the distance and orientation of the permanent magnet, we can implement the control of the MSSW propagating velocity, so that the influence of the MSSW propagating velocity on the bandwidths of the single-scale wavelet transform processor using MSSW device is solved. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Solution-phase epitaxial growth of noble metal nanostructures on dispersible single-layer molybdenum disulfide nanosheets.

    Science.gov (United States)

    Huang, Xiao; Zeng, Zhiyuan; Bao, Shuyu; Wang, Mengfei; Qi, Xiaoying; Fan, Zhanxi; Zhang, Hua

    2013-02-05

    Compared with the conventional deposition techniques used for the epitaxial growth of metallic structures on a bulk substrate, wet-chemical synthesis based on the dispersible template offers several advantages, including relatively low cost, high throughput, and the capability to prepare metal nanostructures with controllable size and morphology. Here we demonstrate that the solution-processable two-dimensional MoS(2) nanosheet can be used to direct the epitaxial growth of Pd, Pt and Ag nanostructures at ambient conditions. These nanostructures show the major (111) and (101) orientations on the MoS(2)(001) surface. Importantly, the Pt-MoS(2) hybrid nanomaterials exhibit much higher electrocatalytic activity towards the hydrogen evolution reaction compared with the commercial Pt catalysts with the same Pt loading. We believe that nanosheet-templated epitaxial growth of nanostructures via wet-chemical reaction is a promising strategy towards the facile and high-yield production of novel functional materials.

  13. Current-voltage characteristics of single-molecule diarylethene junctions measured with adjustable gold electrodes in solution.

    Science.gov (United States)

    Briechle, Bernd M; Kim, Youngsang; Ehrenreich, Philipp; Erbe, Artur; Sysoiev, Dmytro; Huhn, Thomas; Groth, Ulrich; Scheer, Elke

    2012-01-01

    We report on an experimental analysis of the charge transport through sulfur-free photochromic molecular junctions. The conductance of individual molecules contacted with gold electrodes and the current-voltage characteristics of these junctions are measured in a mechanically controlled break-junction system at room temperature and in liquid environment. We compare the transport properties of a series of molecules, labeled TSC, MN, and 4Py, with the same switching core but varying side-arms and end-groups designed for providing the mechanical and electrical contact to the gold electrodes. We perform a detailed analysis of the transport properties of TSC in its open and closed states. We find rather broad distributions of conductance values in both states. The analysis, based on the assumption that the current is carried by a single dominating molecular orbital, reveals distinct differences between both states. We discuss the appearance of diode-like behavior for the particular species 4Py that features end-groups, which preferentially couple to the metal electrode by physisorption. We show that the energetic position of the molecular orbital varies as a function of the transmission. Finally, we show for the species MN that the use of two cyano end-groups on each side considerably enhances the coupling strength compared to the typical behavior of a single cyano group.

  14. Current–voltage characteristics of single-molecule diarylethene junctions measured with adjustable gold electrodes in solution

    Directory of Open Access Journals (Sweden)

    Bernd M. Briechle

    2012-11-01

    Full Text Available We report on an experimental analysis of the charge transport through sulfur-free photochromic molecular junctions. The conductance of individual molecules contacted with gold electrodes and the current–voltage characteristics of these junctions are measured in a mechanically controlled break-junction system at room temperature and in liquid environment. We compare the transport properties of a series of molecules, labeled TSC, MN, and 4Py, with the same switching core but varying side-arms and end-groups designed for providing the mechanical and electrical contact to the gold electrodes. We perform a detailed analysis of the transport properties of TSC in its open and closed states. We find rather broad distributions of conductance values in both states. The analysis, based on the assumption that the current is carried by a single dominating molecular orbital, reveals distinct differences between both states. We discuss the appearance of diode-like behavior for the particular species 4Py that features end-groups, which preferentially couple to the metal electrode by physisorption. We show that the energetic position of the molecular orbital varies as a function of the transmission. Finally, we show for the species MN that the use of two cyano end-groups on each side considerably enhances the coupling strength compared to the typical behavior of a single cyano group.

  15. Development of a Highly Efficient Hybrid White Organic-Light-Emitting Diode with a Single Emission Layer by Solution Processing.

    Science.gov (United States)

    Wu, Jun-Yi; Chen, Show-An

    2018-02-07

    We use a mixed host, 2,6-bis[3-(carbazol-9-yl)phenyl]pyridine blended with 20 wt % tris(4-carbazoyl-9-ylphenyl)amine, to lower the hole-injection barrier, along with the bipolar and high-photoluminescence-quantum-yield (Φ p = 84%), blue thermally activated delay fluorescence (TADF) material of 9,9-dimethyl-9,10-dihydroacridine-2,4,6-triphenyl-1,3,5-triazine (DMAC-TRZ) as a blue dopant to compose the emission layer for the fabrication of a TADF blue organic-light-emitting diode (BOLED). The device is highly efficient with the following performance parameters: maximum brightness (B max ) = 57586 cd/m 2 , maximum current efficiency (CE max ) = 35.3 cd/A, maximum power efficiency (PE max ) = 21.4 lm/W, maximum external quantum efficiency (EQE max ) = 14.1%, and CIE coordinates (0.18, 0.42). This device has the best performance recorded among the reported solution-processed TADF BOLEDs and has a low efficiency roll-off: at brightness values of 1000 and 5000 cd/m 2 , its CEs are close, being 35.1 and 30.1 cd/A, respectively. Upon further doping of the red phosphor Ir(dpm)PQ 2 (emission peak λ max = 595 nm) into the blue emission layer, we obtained a TADF-phosphor hybrid white organic-light-emitting diode (T-P hybrid WOLED) with high performance: B max = 43594 cd/m 2 , CE max = 28.8 cd/A, PE max = 18.1 lm/W, and CIE coordinates (0.38, 0.44). This B max = 43594 cd/m 2 is better than that of the vacuum-deposited WOLED with a blue TADF emitter, 10000 cd/m 2 . This is also the first report on a T-P hybrid WOLED with a solution-processed emitting layer.

  16. MEGAHIT: an ultra-fast single-node solution for large and complex metagenomics assembly via succinct de Bruijn graph.

    Science.gov (United States)

    Li, Dinghua; Liu, Chi-Man; Luo, Ruibang; Sadakane, Kunihiko; Lam, Tak-Wah

    2015-05-15

    MEGAHIT is a NGS de novo assembler for assembling large and complex metagenomics data in a time- and cost-efficient manner. It finished assembling a soil metagenomics dataset with 252 Gbps in 44.1 and 99.6 h on a single computing node with and without a graphics processing unit, respectively. MEGAHIT assembles the data as a whole, i.e. no pre-processing like partitioning and normalization was needed. When compared with previous methods on assembling the soil data, MEGAHIT generated a three-time larger assembly, with longer contig N50 and average contig length; furthermore, 55.8% of the reads were aligned to the assembly, giving a fourfold improvement. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  17. Dye-assisted dispersion of single-walled carbon nanotubes for solution fabrication of NO2 sensors

    Directory of Open Access Journals (Sweden)

    M. M. Ramli

    2012-09-01

    Full Text Available Direct golden orange dye molecules were used as a dispersing agent to produce suspensions of single-walled carbon nanotubes (SWCNTs in water. Uniform, thin film networks were fabricated by vacuum filtration using different concentrations of SWCNT and transferred subsequently to glass substrates. The dispersion efficiency was compared to other surfactants. Measurement of the sheet resistance as a function of SWCNT concentration showed a transition from 2D percolation to 3D conduction behaviour when the concentration of SWCNTs exceeded 0.001 mg/mL. The electrical response to NO2 gas exposure was investigated as a function of temperature and an optimum response was observed at 200°C.

  18. A new approach to the solution of the linear mixing model for a single isotope: application to the case of an opportunistic predator.

    Science.gov (United States)

    Hall-Aspland, S A; Hall, A P; Rogers, T L

    2005-03-01

    Mixing models are used to determine diets where the number of prey items are greater than one, however, the limitation of the linear mixing method is the lack of a unique solution when the number of potential sources is greater than the number (n) of isotopic signatures +1. Using the IsoSource program all possible combinations of each source contribution (0-100%) in preselected small increments can be examined and a range of values produced for each sample analysed. We propose the use of a Moore Penrose (M-P) pseudoinverse, which involves the inverse of a 2x2 matrix. This is easily generalized to the case of a single isotope with (p) prey sources and produces a specific solution. The Antarctic leopard seal (Hydrurga leptonyx) was used as a model species to test this method. This seal is an opportunistic predator, which preys on a wide range of species including seals, penguins, fish and krill. The M-P method was used to determine the contribution to diet from each of the four prey types based on blood and fur samples collected over three consecutive austral summers. The advantage of the M-P method was the production of a vector of fractions f for each predator isotopic value, allowing us to identify the relative variation in dietary proportions. Comparison of the calculated fractions from this method with 'means' from IsoSource allowed confidence in the new approach for the case of a single isotope, N.

  19. The study of adsorption characteristics Cu2+ and Pb2+ ions onto PHEMA and P(MMA-HEMA) surfaces from aqueous single solution.

    Science.gov (United States)

    Moradi, O; Aghaie, M; Zare, K; Monajjemi, M; Aghaie, H

    2009-10-30

    The adsorption characteristics of Cu2+ and Pb2+ ions onto poly2-hydroxyethyl methacrylate (PHEMA) and copolymer 2-hydroxyethyl methacrylate with monomer methyl methacrylate P(MMA-HEMA) adsorbent surfaces from aqueous single solution were investigated with respect to the changes in the pH of solution, adsorbent composition (changes in the weight percentage of MMA copolymerized with HEMA monomer), contact time and the temperature in the individual aqueous solutions. The linear correlation coefficients of Langmuir and Freundlich isotherms were obtained. The results revealed that the Langmuir isotherm fitted the experimental results better than the Freundlich isotherm. Using the Langmuir model equation, the monolayer adsorption capacity of PHEMA surface was found to be 0.840 and 3.037 mg/g for Cu2+ and Pb2+ ions and adsorption capacity of (PMMA-HEMA) was found to be 31.153 and 31.447 mg/g for Cu2+ and Pb2+ ions, respectively. Changes in the standard Gibbs free energy (DeltaG(0)), standard enthalpy (DeltaH(0)) and standard entropy (DeltaS(0)) show that the adsorption of mentioned ions onto PHEMA and P(MMA-HEMA) are spontaneous and exothermic at 293-323 K.

  20. Heterostructured semiconductor single-walled carbon nanotube films for solution-processed high-performance field-effect transistors

    Science.gov (United States)

    Park, Noh-Hwal; Lee, Seung-Hoon; Jeong, Seung-Hyeon; Khim, Dongyoon; Kim, Yun Ho; Yoo, Sungmi; Noh, Yong-Young; Kim, Jang-Joo

    2018-03-01

    In this paper, we report a simple and effective method to simultaneously achieve a high charge-carrier mobility and low off current in conjugated polymer-wrapped semiconducting single-walled carbon nanotube (s-SWNT) transistors by applying a SWNT bilayer. To achieve the high mobility and low off current, highly purified and less purified s-SWNTs are successively coated to form the semiconducting layer consisting of poly (3-dodecylthiophene-2,5-diyl) (P3DDT)-wrapped high-pressure carbon mono oxide (HiPCO) SWNT (P3DDT-HiPCO) and poly (9, 9-di-n-dodecylfluorene) (PFDD)-wrapped plasma discharge (PD) SWNT (PFDD-PD). The SWNT transistors with bilayer SWNT networked film showed highly improved hole field-effect mobility (6.18 ± 0.85 cm2V-1s-1 average), on/off current ratio (107), and off current (˜1 pA). Thus, the combination of less purified PFDD-PD (98%-99%) charge-injection layer and highly purified s-P3DDT-HiPCO (>99%) charge-transport layer as the bi-layered semiconducting film achieved high mobility and low off current simultaneously.

  1. Autoimmune pancreatitis: Assessment of the enhanced duct sign on multiphase contrast-enhanced computed tomography

    International Nuclear Information System (INIS)

    Kawai, Yuichi; Suzuki, Kojiro; Itoh, Shigeki; Takada, Akira; Mori, Yoshine; Naganawa, Shinji

    2012-01-01

    Purpose: To assess the usefulness of the computed tomography (CT) finding of main pancreatic duct (MPD) wall enhancement, termed the “enhanced duct sign”, for diagnosis of autoimmune pancreatitis (AIP) in comparison with diagnosis of pancreatic carcinoma and chronic pancreatitis. Materials and methods: Two radiologists independently evaluated the presence or absence of the enhanced duct sign on multiphase contrast-enhanced CT in patients with AIP (n = 55), pancreatic carcinoma (n = 50), and chronic pancreatitis (n = 50). The sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of AIP were calculated. In patients demonstrating the enhanced duct sign, additional findings were evaluated by consensus. Results: The enhanced duct sign was more frequently observed in patients with AIP (37/55, 67%) than in patients with pancreatic carcinoma (5/50, 10%) or chronic pancreatitis (0/50, 0%) (P < 0.05). The sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of the finding were 0.67, 0.95, 0.85, 0.88, and 0.84, respectively. In AIP, the lumen within the enhanced duct was completely or partially invisible in 29 of 37 (78%) patients, and the enhanced duct was observed within the affected pancreatic parenchyma in 35 of 37 (95%) patients. In pancreatic carcinoma, the lumen within the enhanced duct was visible in all patients (5/5, 100%), and the enhanced duct was observed downstream of the tumor (5/5, 100%). Conclusion: The enhanced duct sign is highly specific of AIP.

  2. Autoimmune pancreatitis: Assessment of the enhanced duct sign on multiphase contrast-enhanced computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Kawai, Yuichi, E-mail: kawai.yuichi@a.mbox.nagoya-u.ac.jp [Department of Radiology, Nagoya University Graduate School of Medicine, 65 Tsurumai-cho, Showa-ku, Nagoya 466-8550 (Japan); Suzuki, Kojiro, E-mail: kojiro@med.nagoya-u.ac.jp [Department of Radiology, Nagoya University Graduate School of Medicine, 65 Tsurumai-cho, Showa-ku, Nagoya 466-8550 (Japan); Itoh, Shigeki, E-mail: shigeito@nagoya-1st.jrc.or.jp [Department of Diagnostic Radiology, Japan Red Cross Nagoya Daiichi Hospital, 3-35 Michishita-cho, Nakamura-ku, Nagoya 453-8511 (Japan); Takada, Akira, E-mail: takadaa@med.nagoya-u.ac.jp [Department of Radiology, Nagoya University Graduate School of Medicine, 65 Tsurumai-cho, Showa-ku, Nagoya 466-8550 (Japan); Mori, Yoshine, E-mail: yoshine@med.nagoya-u.ac.jp [Department of Radiology, Nagoya University Graduate School of Medicine, 65 Tsurumai-cho, Showa-ku, Nagoya 466-8550 (Japan); Naganawa, Shinji, E-mail: naganawa@med.nagoya-u.ac.jp [Department of Radiology, Nagoya University Graduate School of Medicine, 65 Tsurumai-cho, Showa-ku, Nagoya 466-8550 (Japan)

    2012-11-15

    Purpose: To assess the usefulness of the computed tomography (CT) finding of main pancreatic duct (MPD) wall enhancement, termed the 'enhanced duct sign', for diagnosis of autoimmune pancreatitis (AIP) in comparison with diagnosis of pancreatic carcinoma and chronic pancreatitis. Materials and methods: Two radiologists independently evaluated the presence or absence of the enhanced duct sign on multiphase contrast-enhanced CT in patients with AIP (n = 55), pancreatic carcinoma (n = 50), and chronic pancreatitis (n = 50). The sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of AIP were calculated. In patients demonstrating the enhanced duct sign, additional findings were evaluated by consensus. Results: The enhanced duct sign was more frequently observed in patients with AIP (37/55, 67%) than in patients with pancreatic carcinoma (5/50, 10%) or chronic pancreatitis (0/50, 0%) (P < 0.05). The sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of the finding were 0.67, 0.95, 0.85, 0.88, and 0.84, respectively. In AIP, the lumen within the enhanced duct was completely or partially invisible in 29 of 37 (78%) patients, and the enhanced duct was observed within the affected pancreatic parenchyma in 35 of 37 (95%) patients. In pancreatic carcinoma, the lumen within the enhanced duct was visible in all patients (5/5, 100%), and the enhanced duct was observed downstream of the tumor (5/5, 100%). Conclusion: The enhanced duct sign is highly specific of AIP.

  3. Acute ureterolithiasis: Incidence of secondary signs on unenhanced helical CT and influence on patient management

    Energy Technology Data Exchange (ETDEWEB)

    Ege, G. E-mail: gurkanege@yahoo.com; Akman, H.; Kuzucu, K.; Yildiz, S

    2003-12-01

    AIM: The purpose of this study was to determine the incidence of secondary signs associated with ureteral stones on unenhanced helical computed tomography (CT) of patients with acute renal colic, and to correlate these with patient management and outcome. MATERIALS AND METHODS: One hundred and ten patients with ureterolithiasis were evaluated prospectively for the secondary signs of obstruction on unenhanced helical CT. Our attention was focused primarily on the presence or absence of seven secondary signs on unenhanced helical CT, including hydronephrosis, unilateral renal enlargement, perinephric oedema, unilateral absence of the white pyramid, hydroureter, periureteral oedema and lateroconal fascial thickening. RESULTS: Of the 110 patients, 91 (82.7%) had hydroureter, 88 (80%) had hydronephrosis, 65 (59%) had periureteric oedema and 63 (57.2%) had unilateral renal enlargement. Ninety stones passed spontaneously and 21 required intervention. CONCLUSION: Secondary signs of urinary tract obstruction are useful and supportive findings in interpretation of the CT examination. In our experience, the most reliable signs indicating ureteral obstruction are hydroureter, hydronephrosis, periureteral oedema and unilateral renal enlargement, respectively. In addition, stones larger than 6 mm, located within the proximal two thirds of the ureter, and seen associated with five or more the secondary signs of obstruction, are more likely to require endoscopic removal and/or lithotripsy.

  4. The Effect of Singing Paired with Signing on Receptive Vocabulary Skills ofElementary ESL Students.

    Science.gov (United States)

    Schunk

    1999-01-01

    The purpose of this study was to determine the effect of singing paired with signing on receptive vocabulary skills of elementary English as a Second Language (ESL) students. Eighty children attended language sessions in one of the following rehearsal conditions: sung text paired with signs, spoken text paired with signs, sung text, and a control group of spoken text only. Pretest and posttest data were analyzed to determine gains in receptive vocabulary identification. Results from this study indicate that all four groups made significant pretest to posttest gains. Children in the sung text paired with sign and the spoken text paired with sign conditions, however, made significantly greater gains in vocabulary recognition than those in the control condition of spoken text only. These findings suggest the benefits of integrating signs into second language rehearsal to provide visual cues and to engage students in meaningful physical participation. The condition yielding the highest mean gain score was that in which signing was paired with singing, indicating there may be advantages to using a combination of the two for language acquisition.

  5. Subtalar coalition: usefulness of the C sign on lateral radiographs of the ankle

    International Nuclear Information System (INIS)

    Kim, Seong Hyun; Ahn, Joong Mo; Lee, Min Hee; Yoon, Hye Kyung; Kim, Sung Moon; Shin, Myung Jin; Kang, Heung Sik

    2001-01-01

    To assess the usefulness of the talocalcaneal C sign in the diagnosis of subtalar coalition, as seen on lateral radiographs of the ankle. Lateral radiographs of 12 ankles in 11 patients were included in this study. Twelve subtalar coalitions were confirmed by surgery (n=6), or by CT and/or MR (n=6). The presence of the talocalcaneal C sign on lateral ankle radiographs was determined. The C sign was continuous in six feet and interrupted in the remaining six. Subtalar coalition occurred simultaneously inthe middle and posterior subtalar joints in two cases, the posterior subtalar joint only in six, and in the middle subtalar joint only in four. In six cases confirmed at surgery, subtalar coalitions consisted of both synostosis and non-osseous fusion (synchondrosis and/or syndesmosis) and in one case of middle subtalar coalition, there was a bony bridge. The remaining six cases. confirmed at CT or MRI, involved both synostosis and non-osseous fusion (n=1) or non-osseous fusion only (n=5). In the diagnosis of subtalar coalition, the talocalcaneal C sign, seen on lateral radiographs of the ankle, is a useful indicator

  6. DC-SIGN on B lymphocytes is required for transmission of HIV-1 to T lymphocytes.

    Directory of Open Access Journals (Sweden)

    Giovanna Rappocciolo

    2006-07-01

    Full Text Available Infection of T cells by HIV-1 can occur through binding of virus to dendritic cell (DC-specific ICAM-3 grabbing nonintegrin (DC-SIGN on dendritic cells and transfer of virus to CD4+ T cells. Here we show that a subset of B cells in the blood and tonsils of normal donors expressed DC-SIGN, and that this increased after stimulation in vitro with interleukin 4 and CD40 ligand, with enhanced expression of activation and co-stimulatory molecules CD23, CD58, CD80, and CD86, and CD22. The activated B cells captured and internalized X4 and R5 tropic strains of HIV-1, and mediated trans infection of T cells. Pretreatment of the B cells with anti-DC-SIGN monoclonal antibody blocked trans infection of T cells by both strains of HIV-1. These results indicate that DC-SIGN serves as a portal on B cells for HIV-1 infection of T cells in trans. Transmission of HIV-1 from B cells to T cells through this DC-SIGN pathway could be important in the pathogenesis of HIV-1 infection.

  7. Solution combustion synthesis of strontium aluminate, SrAl2O4, powders: single-fuel versus fuel-mixture approach.

    Science.gov (United States)

    Ianoş, Robert; Istratie, Roxana; Păcurariu, Cornelia; Lazău, Radu

    2016-01-14

    The solution combustion synthesis of strontium aluminate, SrAl2O4, via the classic single-fuel approach and the modern fuel-mixture approach was investigated in relation to the synthesis conditions, powder properties and thermodynamic aspects. The single-fuel approach (urea or glycine) did not yield SrAl2O4 directly from the combustion reaction. The absence of SrAl2O4 was explained by the low amount of energy released during the combustion process, in spite of the highly negative values of the standard enthalpy of reaction and standard Gibbs free energy. In the case of single-fuel recipes, the maximum combustion temperatures measured by thermal imaging (482 °C - urea, 941 °C - glycine) were much lower than the calculated adiabatic temperatures (1864 °C - urea, 2147 °C - glycine). The fuel-mixture approach (urea and glycine) clearly represented a better option, since (α,β)-SrAl2O4 resulted directly from the combustion reaction. The maximum combustion temperature measured in the case of a urea and glycine fuel mixture was the highest one (1559 °C), which was relatively close to the calculated adiabatic temperature (1930 °C). The addition of a small amount of flux, such as H3BO3, enabled the formation of pure α-SrAl2O4 directly from the combustion reaction.

  8. Improved methodology for identification of protists and microalgae from plankton samples preserved in Lugol's iodine solution: combining microscopic analysis with single-cell PCR.

    Science.gov (United States)

    Auinger, Barbara M; Pfandl, Karin; Boenigk, Jens

    2008-04-01

    Here we introduce a method for quantitative analysis of planktonic protists and microalgae from preserved field samples combining morphological and small-subunit (SSU) rRNA gene sequence analysis. We linked a microscopic screening with PCR of single cells using field samples preserved with Lugol's iodine solution. Cells possessing a rigid cell wall were incubated with Viscozyme and subsequently with proteinase K for cell disruption; this was unnecessary for fragile cells. The addition of sodium thiosulfate to the PCR tube considerably decreased the inhibiting effect of the fixative (iodine) on the PCR and thus allowed for successful single-cell PCR even of long DNA fragments (up to as many as 3,000 base pairs). We further applied the protocol to investigate the dominant SSU rRNA genotypes in distinct flagellate morphospecies originating from different samples. We hypothesized that despite the morphological similarity, protist morphospecies in different habitats or sampled during different seasons are represented by different genotypes. Our results indicate species-specific differences: the two species Ochromonas sp. and Dinobryon divergens were represented by several different genotypes each, and for the latter species, the dominating genotype differed with habitat. In contrast, Dinobryon pediforme, Dinobryon bavaricum, and Synura sphagnicola were exclusively represented by a single genotype each, and the respective genotype was the same in different samples. In summary, our results highlight the significance of molecular variation within protist morphospecies.

  9. Improved Methodology for Identification of Protists and Microalgae from Plankton Samples Preserved in Lugol's Iodine Solution: Combining Microscopic Analysis with Single-Cell PCR▿ †

    Science.gov (United States)

    Auinger, Barbara M.; Pfandl, Karin; Boenigk, Jens

    2008-01-01

    Here we introduce a method for quantitative analysis of planktonic protists and microalgae from preserved field samples combining morphological and small-subunit (SSU) rRNA gene sequence analysis. We linked a microscopic screening with PCR of single cells using field samples preserved with Lugol's iodine solution. Cells possessing a rigid cell wall were incubated with Viscozyme and subsequently with proteinase K for cell disruption; this was unnecessary for fragile cells. The addition of sodium thiosulfate to the PCR tube considerably decreased the inhibiting effect of the fixative (iodine) on the PCR and thus allowed for successful single-cell PCR even of long DNA fragments (up to as many as 3,000 base pairs). We further applied the protocol to investigate the dominant SSU rRNA genotypes in distinct flagellate morphospecies originating from different samples. We hypothesized that despite the morphological similarity, protist morphospecies in different habitats or sampled during different seasons are represented by different genotypes. Our results indicate species-specific differences: the two species Ochromonas sp. and Dinobryon divergens were represented by several different genotypes each, and for the latter species, the dominating genotype differed with habitat. In contrast, Dinobryon pediforme, Dinobryon bavaricum, and Synura sphagnicola were exclusively represented by a single genotype each, and the respective genotype was the same in different samples. In summary, our results highlight the significance of molecular variation within protist morphospecies. PMID:18296536

  10. Acute benign vertebral compression fractures: "see-through sign" on contrast-enhanced MR images.

    Science.gov (United States)

    Lee, Eugene; Lee, Joon Woo; Lee, Jinyoung; Lee, Guen Young; Kang, Woo Young; Yoo, Bo Reum; Shin, Yoon Joo; Ahn, Joong Mo; Kang, Heung Sik

    2016-11-01

    To retrospectively evaluate the diagnostic role of the contrast-enhanced MRI (CE-MRI) for differentiation between benign VCFs and malignant VCFs focusing on the internal transparent trabecular bone on CE-MRI (the "see-through sign"). The institutional review board approved this study and informed consent was waived due to the retrospective nature of the study. From January 2012 to December 2013, all 149 consecutive benign or malignant VCF patients were enrolled for consideration in this study from a CE-MRI database. In the first analysis, four radiologists independently evaluated the presence or absence of the see-through sign. The see-through sign was defined as internal transparent trabecular bone morphology on CE-MRI. The intraclass correlation coefficient (ICC), percentage agreement, and Fleiss's kappa statistics were obtained. Fifty-seven patients (M:F = 27:30; mean age, 63 years; age range, 20-88 years) who diagnosed as acute benign (n = 24) and malignant (n = 33) VCFs were finally included for the analysis. The results of all readers showed that the see-through sign was associated with acute benign VCFs (p see-through sign ranged from 75-96, 70-88, 66-85, 81-97 %, respectively. The inter-observer reliability of the see-through sign was sufficient with ICC = 0.847, percentage agreement = 78.9, and κ = 0.578. The see-through sign on CE-MRI is featured in acute benign VCFs, and it can be a useful finding to differentiate between benign and malignant VCFs.

  11. Corrosion Resistance Behavior of Single-Layer Cathodic Arc PVD Nitride-Base Coatings in 1M HCl and 3.5 pct NaCl Solutions

    Science.gov (United States)

    Adesina, Akeem Yusuf; Gasem, Zuhair M.; Madhan Kumar, Arumugam

    2017-04-01

    The electrochemical behavior of single-layer TiN, CrN, CrAlN, and TiAlN coatings on 304 stainless steel substrate, deposited using state-of-the-art and industrial size cathodic arc PVD machine, were evaluated in 1M HCl and 3.5 pct NaCl solutions. The corrosion behavior of the blank and coated substrates was analyzed by electrochemical impedance spectroscopy (EIS), linear polarization resistance, and potentiodynamic polarization. Bond-coat layers of pure-Ti, pure-Cr, alloyed-CrAl, and alloyed-TiAl for TiN, CrN, CrAlN, and TiAlN coatings were, respectively, first deposited for improved coating adhesion before the actual coating. The average coating thickness was about 1.80 µm. Results showed that the corrosion potentials ( E corr) of the coated substrates were shifted to more noble values which indicated improvement of the coated substrate resistance to corrosion susceptibility. The corrosion current densities were lower for all coated substrates as compared to the blank substrate. Similarly, EIS parameters showed that these coatings possessed improved resistance to defects and pores in similar solution compared to the same nitride coatings developed by magnetron sputtering. The charge transfer resistance ( R ct) can be ranked in the following order: TiAlN > CrN > TiN > CrAlN in both media except in NaCl solution where R ct of TiN is lowest. While the pore resistance ( R po) followed the order: CrAlN > CrN > TiAlN > TiN in HCl solution and TiAlN > CrN > CrAlN > TiN in NaCl solution. It is found that TiAlN coating has the highest protective efficiencies of 79 and 99 pct in 1M HCl and 3.5 pct NaCl, respectively. SEM analysis of the corroded substrates in both media was also presented.

  12. Synthesis, single crystal growth and thermodynamic properties of SrNdAlO4-CaNdAlO4 solid solutions

    International Nuclear Information System (INIS)

    Novoselov, A.; Ryumin, M.; Pushkina, G.; Spiridonov, F.; Komissarova, L.; Zimina, G.; Pajaczkowska, A.

    2005-01-01

    Continuous solid solutions in the SrNdAlO 4 -CaNdAlO 4 system are formed. Powder samples of Sr x Ca 1-x NdAlO 4 (0.0≤x≤1.0) were obtained using the carbonate coprecipitation method while single crystals of Sr x Ca 1-x NdAlO 4 (x=0.0,0.162,0.392,0.687,1.0) were grown by the Czochralski method. Structural parameters and thermodynamic properties of the samples were studied by X-ray diffraction and heat flux Calvet calorimetry. Composition dependence of lattice constants was observed to follow Vegard's low. Heat of solution of the Sr x Ca 1-x NdAlO 4 samples in molten 2PbO.B 2 O 3 were measured, and enthalpies of formation and mixing were calculated. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  13. The efficiency enhancement of single-layer solution-processed blue phosphorescent organic light emitting diodes by hole injection layer modification

    International Nuclear Information System (INIS)

    Yeoh, K H; Talik, N A; Whitcher, T J; Ng, C Y B; Woon, K L

    2014-01-01

    Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) PEDOT : PSS is extensively used as a hole injection layer (HIL) in solution-processed organic light emitting diodes (OLEDs). The high work function of a HIL is crucial in improving OLED efficiency. The work function of PEDOT : PSS is usually around 5.1–5.3 eV. By adding perfluorinated ionomer (PFI), the work function of PEDOT : PSS has been reported to reach as high as 5.95 eV. We investigated the effects of PFI-modified PEDOT : PSS in a single-layer solution-processed blue phosphorescent OLED (PHOLED). We observed that high concentrations of a PFI in PEDOT : PSS has detrimental effects on the device efficiency due to the low conductivity of the PFI. Using this approach, blue PHOLEDs with efficiencies of 9.4 lm W −1 (18.2 cd A −1 ) and 7.9 lm W −1 (20.4 cd A −1 ) at 100 cd m −2 and 1000 cd m −2 , respectively, were demonstrated. (paper)

  14. High-Throughput Single-Particle Analysis of Metal-Enhanced Fluorescence in Free Solution Using Ag@SiO2Core-Shell Nanoparticles.

    Science.gov (United States)

    Yan, Ya; Meng, Lingyan; Zhang, Wenqiang; Zheng, Yan; Wang, Shuo; Ren, Bin; Yang, Zhilin; Yan, Xiaomei

    2017-09-22

    Metal-enhanced fluorescence (MEF) based on localized surface plasmon resonance (LSPR) is an effective strategy to increase the detection sensitivity in biotechnology and biomedicine. Because plasmonic nanoparticles are intrinsically heterogeneous, high-throughput single-particle analysis of MEF in free solution are highly demanded for the mechanistic understanding and control of this nanoscale process. Here, we report the application of a laboratory-built high-sensitivity flow cytometer (HSFCM) to investigate the fluorescence-enhancing effect of individual plasmonic nanoparticles on nearby fluorophore molecules. Ag@SiO 2 core-shell nanoparticles were used as the model system which comprised a silver core, a silica shell, and an FITC-doped thin layer of silica shell. FITC-doped silica nanoparticles of the same particle size but without silver core were used as the counterparts. Both the side scattering and fluorescence signals of single nanoparticles in suspension were measured simultaneously by the HSFCM at a speed of thousands of particles per minute. The roles of silver core size (40-100 nm) and fluorophore-metal distance (5-30 nm) were systematically examined. Fluorescence enhancement factor exceeding 30 was observed at silver core size of 70 nm and silica shell thickness of 5 nm. Compared with ensemble-averaged spectrofluorometric measurements, our experimental observation at the single-particle level was well supported by the finite difference time domain (FDTD) calculation. It allows us to achieve a fundamental understanding of MEF, which is important to the design and control of plasmonic nanostructures for efficient fluorescence enhancement.

  15. Automatically varying the composition of a mixed refrigerant solution for single mixed refrigerant LNG (liquefied natural gas) process at changing working conditions

    International Nuclear Information System (INIS)

    Xu, Xiongwen; Liu, Jinping; Cao, Le; Pang, Weiqiang

    2014-01-01

    The SMR (single mixed refrigerant) process is widely used in the small- and medium-scale liquefaction of NG (natural gas). Operating the MR (mixed-refrigerant) process outside of the design specifications is difficult but essential to save energy. Nevertheless, it is difficult to realize because the process needs to alter the working refrigerant composition. To address this challenge, this study investigated the performance diagnosis mechanism for SMR process. A control strategy was then proposed to control the changes in working refrigerant composition under different working conditions. This strategy separates the working refrigerant flow in the SMR process into three flows through two phase separators before it flows into the cold box. The first liquid flow is rich in the high-temperature component (isopentane). The second liquid flow is rich in the middle-temperature components (ethylene and propane), and the gas flow is rich in the low-temperature components (nitrogen and methane). By adjusting the flow rates, it is easy to decouple the control variables and automate the system. Finally, this approach was validated by process simulation and shown to be highly adaptive and exergy efficient in response to changing working conditions. - Highlights: • The performance diagnosis mechanism of SMR LNG process is studied. • A measure to automatically change the operation composition as per the working conditions is proposed for SMR process. • SMR process simulation is performed to verify the validity of the control solution. • The control solution notably improves the energy efficiency of SMR process at changing working condition

  16. Precipitation in solid solution and structural transformations in single crystals of high rhenium ruthenium-containing nickel superalloys at high-temperature creep

    Energy Technology Data Exchange (ETDEWEB)

    Alekseev, A.A.; Petrushin, N.V.; Zaitsev, D.V.; Treninkov, I.A.; Filonova, E.V. [All-Russian Scientific Research Institute of Aviation Materials (VIAM), Moscow (Russian Federation)

    2010-07-01

    The phase composition and structure of single crystals of two superalloys (alloy 1 and alloy 2) were investigated in this work. For alloy 1 (Re - 9 wt%) the kinetics of precipitation in solid solution at heat treatment (HT) was investigated. TEM and X-Ray examinations have revealed that during HT rhombic phase (R-phase) precipitation (Immm class (BCR)) occurs. The TTT diagram is plotted, it contains the time-temperature area of the existence of R-phase particles. The element content of R-phase is identified (at. %): Re- 51.5; Co- 23.5; Cr- 14.8; Mo- 4.2; W- 3.3; Ta- 2.7. For alloy 2 (Re - 6.5 wt %, Ru - 4 wt %) structural transformations at high-temperature creep are investigated. By dark-field TEM methods it is established, that in alloy 2 the additional phase with a rhombic lattice is formed during creep. Particles of this phase precipitate in {gamma}-phase and their quantity increases during high-temperature creep. It is revealed that during creep 3-D dislocation network is formed in {gamma}-phase. At the third stage of creep the process of inversion structure formation is observed in the alloy, i.e. {gamma}'-phase becomes a matrix. Thus during modeling creep the volume fraction of {gamma}'-phase in the samples increases from 30% (at creep duration of 200 hrs) up to 55% (at 500 hrs). The processes of structure formation in Re and Ru-containing nickel superalloys are strongly affected by decomposition of solid solution during high-temperature creep that includes precipitation of additional TCP-phases. (orig.)

  17. Sequential study on reactive blue 29 dye removal from aqueous solution by peroxy acid and single wall carbon nanotubes: experiment and theory

    Directory of Open Access Journals (Sweden)

    Jahangiri-Rad Mahsa

    2013-01-01

    Full Text Available Abstract The majority of anthraquinone dye released to the environment come from antrapogenic sources. Several techniques are available for dyes' removal. In this study removal of reactive blue 29 (RB29 by an advanced oxidation process sequenced with single wall carbon nanotubes was investigated. Advanced oxidation process was optimized over a period of 60 minutes by changing the ratio of acetic acid to hydrogen peroxide, the compounds which form peroxy acid. Reduction of 20.2% -56.4% of reactive blue 29 was observed when the ratio of hydrogen peroxide/acetic acid/dye changed from 344/344/1 to 344/344/0.08 at different times (60, 120 and 180 min. The optimum ratio of acetic acid/hydrogen peroxide/dye was found to be 344/344/0.16 over 60 min. The resultant then was introduced for further removal by single wall carbon nanotubes(SWCNTs as adsorbent. The adsorption of reactive blue 29 onto SWCNTs was also investigated. Langmuir, Freundlich and BET isotherms were determined and the results revealed that the adsorption of RB29 onto SWCNTs was well explained by BET model and changed to Freundlich isotherm when SWCNTs was used after the application of peroxy acid. Kinetic study showed that the equilibrium time for adsorption of RB 29 on to SWCNT is 4 h. Experiments were carried out to investigate adsorption kinetics, adsorbent capacity and the effect of solution pH on the removal of reactive blue29. The pseudo-second order kinetic equation could best describe the sorption kinetics. The most efficient pH for color removal (amongst pH=3, 5 and 8 was pH= 5. Further studies are needed to identify the peroxy acid degradation intermediates and to investigate their effects on SWCNTs.

  18. Base Catalytic Approach: A Promising Technique for the Activation of Biochar for Equilibrium Sorption Studies of Copper, Cu(II Ions in Single Solute System

    Directory of Open Access Journals (Sweden)

    Sharifah Bee Abdul Hamid

    2014-04-01

    Full Text Available This study examines the feasibility of catalytically pretreated biochar derived from the dried exocarp or fruit peel of mangostene with Group I alkali metal hydroxide (KOH. The pretreated char was activated in the presence of carbon dioxide gas flow at high temperature to upgrade its physiochemical properties for the removal of copper, Cu(II cations in single solute system. The effect of three independent variables, including temperature, agitation time and concentration, on sorption performance were carried out. Reaction kinetics parameters were determined by using linear regression analysis of the pseudo first, pseudo second, Elovich and intra-particle diffusion models. The regression co-efficient, R2 values were best for the pseudo second order kinetic model for all the concentration ranges under investigation. This implied that Cu(II cations were adsorbed mainly by chemical interactions with the surface active sites of the activated biochar. Langmuir, Freundlich and Temkin isotherm models were used to interpret the equilibrium data at different temperature. Thermodynamic studies revealed that the sorption process was spontaneous and endothermic. The surface area of the activated sample was 367.10 m2/g, whereas before base activation, it was only 1.22 m2/g. The results elucidated that the base pretreatment was efficient enough to yield porous carbon with an enlarged surface area, which can successfully eliminate Cu(II cations from waste water.

  19. High-Performance Solution-Processed Single-Junction Polymer Solar Cell Achievable by Post-Treatment of PEDOT:PSS Layer with Water-Containing Methanol.

    Science.gov (United States)

    Li, Weiping; Zhang, Xinliang; Zhang, Xin; Yao, Jiannian; Zhan, Chuanlang

    2017-01-18

    PSS (poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)) is widely used as the hole-transporting layer for fabrication of new-generation solar cells. Herein, we utilize water-containing methanol to post-treat the PEDOT:PSS surface, by which the insulating PSS component is partially washed out with the PEDOT-to-PSS weight ratio increasing from 1:6.79 to 1:2.93. As a result, the surface becomes more covered with the electrically conductive PEDOT nanodomains, and again the mean current of the conductive nanodomains increases slightly from 6.68 to 7.28 pA, as demonstrated with conductive atomic force microscopy images. The electrical conductivity of the bulk PEDOT:PSS layer increases from 5.51 × 10 -4 to 4.04 × 10 -2 S/cm. The improvement in the surface conductivity allows for more efficient collection of mobile holes with a bit higher value of the hole mobility (5.56 vs 6.78 × 10 -4 cm 2 V -1 s -1 ). The solution-processed single-junction polymer solar cell fabricated on the treated PEDOT:PSS surface shows a higher mean short-circuit current-density (14.46 vs 16.48 mA cm -2 ) and, hence, a higher mean power conversion efficiency (8.23% vs 9.28%) than that on the untreated surface, as calculated from over 200 cells.

  20. Development of a Single Vial Kit Solution for Radiolabeling of 68Ga-DKFZ-PSMA-11 and Its Performance in Prostate Cancer Patients

    Directory of Open Access Journals (Sweden)

    Thomas Ebenhan

    2015-08-01

    Full Text Available Prostate-specific membrane antigen (PSMA, a type II glycoprotein, is highly expressed in almost all prostate cancers. By playing such a universal role in the disease, PSMA provides a target for diagnostic imaging of prostate cancer using positron emission tomography/computed tomography (PET/CT. The PSMA-targeting ligand Glu-NH-CO-NH-Lys-(Ahx-HBED-CC (DKFZ-PSMA-11 has superior imaging properties and allows for highly-specific complexation of the generator-based radioisotope Gallium-68 (68Ga. However, only module-based radiolabeling procedures are currently available. This study intended to develop a single vial kit solution to radiolabel buffered DKFZ-PSMA-11 with 68Ga. A 68Ge/68Ga-generator was utilized to yield 68GaCl3 and major aspects of the kit development were assessed, such as radiolabeling performance, quality assurance, and stability. The final product was injected into patients with prostate cancer for PET/CT imaging and the kit performance was evaluated on the basis of the expected biodistribution, lesion detection, and dose optimization. Kits containing 5 nmol DKFZ-PSMA-11 showed rapid, quantitative 68Ga-complexation and all quality measurements met the release criteria for human application. The increased precursor content did not compromise the ability of 68Ga-DKFZ-PSMA-11 PET/CT to detect primary prostate cancer and its advanced lymphatic- and metastatic lesions. The 68Ga-DKFZ-PSMA-11 kit is a robust, ready-to-use diagnostic agent in prostate cancer with high diagnostic performance.

  1. Screen-detected breast cancer: Does presence of minimal signs on prior mammograms predict staging or grading of cancer?

    Energy Technology Data Exchange (ETDEWEB)

    Bansal, G.J., E-mail: gjbansal@gmail.com [Department of Radiology, University Hospital of Wales, Heath Park, Cardiff, CF14 4XW (United Kingdom); Thomas, K.G. [Department of Radiology, Breast Test Wales, Cathedral Road, Cardiff (United Kingdom)

    2011-07-15

    Aim: To investigate whether the presence of minimal signs on prior mammograms predict staging or grading of cancer. Materials and methods: The previous mammograms of 148 consecutive patients with screen-detected breast cancer were examined. Women with an abnormality visible (minimal signs) on both current and prior mammograms formed the study group; the remaining patients formed the control group. Age, average size of tumour, tumour characteristic, histopathology, grade, and lymph node status were compared between the two groups, using Fisher's exact test. Cases in which earlier diagnosis would have made a significant prognostic difference were also evaluated. Results: Eighteen percent of patients showed an abnormality at the site of the tumour on previous mammograms. There was no statistically significant difference between the two groups with respect to age, average size of tumour, histopathology, grade or lymph node status with p-values being 0.609, 0.781, 0.938, and 0.444, respectively. The only statistically significant difference between the two groups was tumour characteristics with more microcalcifications associated with either mass or asymmetrical density seen in the study group (p = 0.003). Five patients in the study group showed lymph node positivity and were grade 3, and therefore, may have had possible gain from earlier diagnosis. Conclusion: The present study did not demonstrate a statistical difference in grading or staging between the group that showed 'minimal signs' on prior mammograms versus normal prior mammograms. Microcalcification seems to be the most common characteristic seen in the missed cancer and a more aggressive management approach is suggested for breast microcalcifications.

  2. High-temperature solution growth and characterization of (1-x)PbTiO3-xBi(Zn2/3Nb1/3)O3 piezo-/ferroelectric single crystals

    Science.gov (United States)

    Paterson, Alisa R.; Zhao, Jinyan; Liu, Zenghui; Wu, Xiaoqing; Ren, Wei; Ye, Zuo-Guang

    2018-03-01

    Complex perovskite PbTiO3-Bi(Me‧Me″)O3 solid solutions represent new materials systems that possess a higher Curie temperature (TC) than the relaxor-PbTiO3 solid solutions, and are useful for potential applications. To this end, novel ferroelectric single crystals of the (1-x)PbTiO3-xBi(Zn2/3Nb1/3)O3 (PT-BZN) solid solution were successfully grown by the high-temperature solution growth (HTSG) method. Powder X-ray diffraction shows that the symmetry of the grown crystals is tetragonal. The dielectric permittivity and optical domain structures were characterized by dielectric measurements and polarized light microscopy, respectively, as a function of temperature, revealing a first-order ferroelectric-paraelectric phase transition at a TC of 436 ± 2 °C. Based on the TC, the average composition of the crystal platelet was estimated to be 0.58PT-0.42BZN. Piezoresponse force microscopy measurements of the phase and amplitude as a function of voltage reveal the complex polar domain structure and demonstrate the ferroelectric switching behaviour of these materials. These results suggest that the PT-BZN single crystals indeed form a new family of high TC piezo-/ferroelectric materials which are potentially useful for the fabrication of electromechanical transducers for high-temperature applications.

  3. Effects of Sex on Intra-Individual Variance in Urinary Solutes in Stone-Formers Collected from a Single Clinical Laboratory.

    Directory of Open Access Journals (Sweden)

    Guy M L Perry

    Full Text Available Our work in a rodent model of urinary calcium suggests genetic and gender effects on increased residual variability in urine chemistries. Based on these findings, we hypothesized that sex would similarly be associated with residual variation in human urine solutes. Sex-related effects on residuals might affect the establishment of physiological baselines and error in medical assays.We tested the effects of sex on residual variation in urine chemistry by estimating coefficients of variation (CV for urinary solutes in paired sequential 24-h urines (≤72 hour interval in 6,758 females and 9,024 males aged 16-80 submitted to a clinical laboratory.Females had higher CVs than males for urinary phosphorus overall at the False Discovery Rate (P0.3. Males had higher CVs for citrate (P<0.01 from ages 16-45 and females higher CVs for citrate (P<0.01 from ages 56-80, suggesting effects of an extant oestral cycle on residual variance.Our findings indicate the effects of sex on residual variance of the excretion of urinary solutes including phosphorus and citrate; differences in CV by sex might reflect dietary lability, differences in the fidelity of reporting or genetic differentiation in renal solute consistency. Such an effect could complicate medical analysis by the addition of random error to phenotypic assays. Renal analysis might require explicit incorporation of heterogeneity among factorial effects, and for sex in particular.

  4. Experimental evidence for self-assembly of CeO2 particles in solution: Formation of single-crystalline porous CeO2 nanocrystals

    DEFF Research Database (Denmark)

    Tan, Hui Ru; Tan, Joyce Pei Ying; Boothroyd, Chris

    2012-01-01

    Single-crystalline porous CeO2 nanocrystals, with sizes of ∼20 nm and pore diameters of 1-2 nm, were synthesized successfully using a hydrothermal method. Using electron tomography, we imaged the three-dimensional structure of the pores in the nanocrystals and found that the oriented aggregation ...... energy-loss spectroscopy. The oxygen vacancies might play an important role in oxygen diffusion in the crystals and the catalytic activities of single-crystalline porous CeO 2 structures. © 2011 American Chemical Society....

  5. Pharmacokinetics and Bioavailability of the GnRH Analogs in the Form of Solution and Zn2+-Suspension After Single Subcutaneous Injection in Female Rats.

    Science.gov (United States)

    Suszka-Świtek, Aleksandra; Ryszka, Florian; Dolińska, Barbara; Dec, Renata; Danch, Alojzy; Filipczyk, Łukasz; Wiaderkiewicz, Ryszard

    2017-04-01

    Although many synthetic gonadoliberin analogs have been developed, only a few of them, including buserelin, were introduced into clinical practice. Dalarelin, which differs from buserelin by just one aminoacid in the position 6 (D-Ala), is not widely used so far. Gonadotropin-releasing hormone (GnRH) analogs are used to treat many different illnesses and are available in different forms like solution for injection, nasal spray, microspheres, etc. Unfortunately, none of the above drug formulations can release the hormones for 24 h. We assumed that classical suspension could solve this problem. Two sets of experiments were performed. In the first one, buserelin and dalarelin were injected into mature female rats in two forms: suspension, in which the analogs are bounded by Zn 2+ ions and solution. The pharmacokinetic parameters and bioavailability of the analogs were calculated, based on their concentration in the plasma measured by high-performance liquid chromatography method (HPLC). In the second experiment, the hormones in two different forms were injected into superovulated immature female rats and then the concentration of Luteinizing hormone (LH), Follicle-stimulating hormone (FSH) and 17β-estradiol in the serum was measured by radioimmunological method. The Extent of Biological Availability (EBA), calculated on the base of AUC 0-∞ , showed that in the form of solution buserelin and dalarelin display, respectively, only 13 and 8 % of biological availability of their suspension counterparts. Comparing both analogs, the EBA of dalarelin was half (53 %) that of buserelin delivered in the form of solution and 83 % when they were delivered in the form of suspension. The injection of buserelin or dalarelin, in the form of solution or suspension, into superovulated female rats increased LH, FSH and estradiol concentration in the serum. However, after injection of the analogs in the form of suspension, the high concentration of LH and FSH in the serum persisted

  6. Glioma infiltration sign on high b-value diffusion-weighted imaging in gliomas and its prognostic value.

    Science.gov (United States)

    Zeng, Qiang; Ling, Chenhan; Shi, Feina; Dong, Fei; Jiang, Biao; Zhang, Jianmin

    2018-03-01

    Glioma cells may infiltrate beyond the tumor margins revealed on conventional structural images. To investigate whether the presence of a glioma infiltration sign on high b-value diffusion-weighted imaging (DWI) can predict the prognosis of gliomas. Retrospective cohort. Fifty-two patients with gliomas (14 WHO grade II; 13 WHO grade III; 25 WHO grade IV). 3.0T, including a T 1 -weighted contrast-enhanced (T 1 w-CE) sequence, contrast-enhanced T 2 -flair sequence, and a DWI sequence. T 1 w-CE images and contrast-enhanced T 2 -flair images were used for identifying the tumor region for enhancing and nonenhancing gliomas, respectively. The glioma infiltration sign was defined as the presence of a peritumoral abnormal high signal region on DWI map, which was adjacent to the tumor region and had higher signal than surrounding areas. This sign was assessed on a high b-value DWI map with b = 3000 s/mm 2 . For patients with glioma infiltration sign, DWI3000 max , DWI1000 max , ADC3000 min , and ADC1000 min were measured by drawing a region of interest over the peritumoral abnormal high signal region. Survival analysis was conducted by using Cox regression. Glioma infiltration sign was observed in 28 (53.8%) patients. The occurrence rate of this sign was 92.0% in grade IV gliomas, 30.8% in grade III gliomas, and 7.1% in grade II gliomas. The glioma infiltration sign could independently predict both the progression-free survival (hazard ratio [HR], 95% confidence interval [CI] = 8.58 [3.19-23.03], P sign, DWI3000 max (P = 0.005) and ADC3000 min (P = 0.008) were both independent predictors of overall survival after adjustment, while DWI1000 max and ADC1000 min were not. The glioma infiltration sign on high b-value DWI is an independent predictor of poor prognosis in glioma patients. High b-value DWI might be a convenient method to detect glioma infiltration. 3 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018. © 2018 International Society for

  7. Studies of Double-Layer Effects at Single-Crystal Gold Electrodes. 3. Reduction Kinetics of Fluoropentaamminecobalt(III) Cation in Aqueous Solutions

    Czech Academy of Sciences Publication Activity Database

    Hromadová, Magdaléna; Fawcett, W. R.

    2004-01-01

    Roč. 108, - (2004), s. 3277-3282 ISSN 1089-5647 R&D Projects: GA ČR GP203/02/P082 Institutional research plan: CEZ:AV0Z4040901 Keywords : double - layer * single crystal * reduction kinetics Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.679, year: 2003

  8. Removal of Pb(II), Cu(II) and Cd(II) from aqueous solution by some fungi and natural adsorbents in single and multiple metal systems

    International Nuclear Information System (INIS)

    Shoaib, A.; Badar, T.; Aslam, N.

    2011-01-01

    Six fungal and 10 natural biosorbents were analyzed for their Cu(II), Cd(II) and Pb(II) uptake capacity from single, binary and ternary metal ion system. Preliminary screening biosorption of assays revealed 2 fungi (Aspergillus niger and Cunninghamella echinulata) and three natural [Cicer arietinum husk, Moringa oleifera flower and soil (clay)] adsorbents hold considerable high adsorption efficiency and capacity for 3 meta l ions amongst the adsorbents. Further biosorption trials with five elected adsorbents showed a considerable reduction in metal uptake capability of adsorbents in binary- and ternary systems as compared to singly metal system. Cd(II) manifested the highest inhibitory effect on the biosorption of other metal ions, followed by Pb(II) and Cu(II). On account of metal preference, the selectivity order for metal ion towards the studied biomass matrices was Pb(II) (40-90%) > Cd(II) (2-53%) > Cu(II) (2-30%). (author)

  9. Single crystal growth of 67%BiFeO 3 -33%BaTiO 3 solution by the floating zone method

    Energy Technology Data Exchange (ETDEWEB)

    Rong, Y.; Zheng, H.; Krogstad, M. J.; Mitchell, J. F.; Phelan, D.

    2018-01-01

    The growth conditions and the resultant grain morphologies and phase purities from floating-zone growth of 67%BiFeO3-33%BaTiO3 (BF-33BT) single crystals are reported. We find two formidable challenges for the growth. First, a low-melting point constituent leads to a pre-melt zone in the feed-rod that adversely affects growth stability. Second, constitutional super-cooling (CSC), which was found to lead to dendritic and columnar features in the grain morphology, necessitates slow traveling rates during growth. Both challenges were addressed by modifications to the floating-zone furnace that steepened the temperature gradient at the melt-solid interfaces. Slow growth was also required to counter the effects of CSC. Single crystals with typical dimensions of hundreds of microns have been obtained which possess high quality and are suitable for detailed structural studies.

  10. Numerical simulation on vacuum solution heat treatment and gas quenching process of a low rhenium-containing Ni-based single crystal turbine blade

    Directory of Open Access Journals (Sweden)

    Zhe-xin Xu

    2016-11-01

    Full Text Available Numerical heat-transfer and turbulent flow model for an industrial high-pressure gas quenching vacuum furnace was established to simulate the heating, holding and gas fan quenching of a low rhenium-bearing Ni-based single crystal turbine blade. The mesh of simplified furnace model was built using finite volume method and the boundary conditions were set up according to the practical process. Simulation results show that the turbine blade geometry and the mutual shielding among blades have significant influence on the uniformity of the temperature distribution. The temperature distribution at sharp corner, thin wall and corner part is higher than that at thick wall part of blade during heating, and the isotherms show a toroidal line to the center of thick wall. The temperature of sheltered units is lower than that of the remaining part of blade. When there is no shelteration among multiple blades, the temperature distribution for all blades is almost identical. The fluid velocity field, temperature field and cooling curves of the single and multiple turbine blades during gas fan quenching were also simulated. Modeling results indicate that the loading tray, free outlet and the location of turbine blades have important influences on the flow field. The high-speed gas flows out from the nozzle is divided by loading tray, and the free outlet enhanced the two vortex flow at the end of the furnace door. The closer the blade is to the exhaust outlet and the nozzle, the greater the flow velocity is and the more adequate the flow is. The blade geometry has an effect on the cooling for single blade and multiple blades during gas fan quenching, and the effects in double layers differs from that in single layer. For single blade, the cooing rate at thin-walled part is lower than that at thick-walled part, the cooling rate at sharp corner is greater than that at tenon and blade platform, and the temperature at regions close to the internal position is

  11. Integrated secure solution for electronic healthcare records sharing

    Science.gov (United States)

    Yao, Yehong; Zhang, Chenghao; Sun, Jianyong; Jin, Jin; Zhang, Jianguo

    2007-03-01

    The EHR is a secure, real-time, point-of-care, patient-centric information resource for healthcare providers. Many countries and regional districts have set long-term goals to build EHRs, and most of EHRs are usually built based on the integration of different information systems with different information models and platforms. A number of hospitals in Shanghai are also piloting the development of an EHR solution based on IHE XDS/XDS-I profiles with a service-oriented architecture (SOA). The first phase of the project targets the Diagnostic Imaging domain and allows seamless sharing of images and reports across the multiple hospitals. To develop EHRs for regional coordinated healthcare, some factors should be considered in designing architecture, one of which is security issue. In this paper, we present some approaches and policies to improve and strengthen the security among the different hospitals' nodes, which are compliant with the security requirements defined by IHE IT Infrastructure (ITI) Technical Framework. Our security solution includes four components: Time Sync System (TSS), Digital Signature Manage System (DSMS), Data Exchange Control Component (DECC) and Single Sign-On (SSO) System. We give a design method and implementation strategy of these security components, and then evaluate the performance and overheads of the security services or features by integrating the security components into an image-based EHR system.

  12. An analytical solution for the estimation of the critical available soil water fraction for a single layer water balance model under growing crops

    Directory of Open Access Journals (Sweden)

    N. Brisson

    1998-01-01

    Full Text Available In the framework of simplified water balance models devoted to irrigation scheduling or crop modelling, the relative transpiration rate (the ratio of actual to maximal transpiration is assumed to decrease linearly when the soil dries out below a critical available water value. This value is usually expressed as a fraction, F, of the maximal available soil water content. The present work aims to use the basic laws governing water transfer through the plants at a daily time step to compute F dynamically as the crop grows. It can be regarded as an expansion of Slabbers' (1980 approach to crop growing conditions. Starting from the mathematical representation given by single-root models (Gardner, 1960, an analytical expression for F is derived, using simplified hypotheses. This expression accounts for plant attributes such as the mean root radius, the critical leaf water potential for stomatal closure and the root length density profile growing with the crop. Environmental factors such as soil type and atmospheric demand also influence F. The structural influence of soil comes from the required introduction of the bulk soil hydraulic conductivity in the single-root model. The shape of the root length density profile is assumed to be sigmoidal and a new profile is calculated at each value of the rooting depth. A sensitivity analysis of F to all those factors is presented. The first general result is that F decreases as the root system grows in depth. Differences in the shape of the root profile can be responsible for differential water stress sensitivity in the early stages of growth. Yet, low critical leaf water potential can compensate partially for a poor root profile. Conversely, F is relatively insensitive to the average root radius. F sensitivity to soil type seems somewhat artificial: given the bulk soil hydraulic conductivity formula, the soil sensitivity results from F being expressed as a fraction of the maximal available soil water content

  13. Six switches solution for single-phase AC/DC/AC converter with capability of second-order power mitigation in DC-link capacitor

    DEFF Research Database (Denmark)

    Liu, Xiong; Wang, Peng; Loh, Poh Chiang

    2011-01-01

    This paper proposes an approach for DC-link second-order harmonic power cancellation in single-phase AC/DC/AC converter with reduced number of switches. The proposed six-switch converter has two bridges with three switches in each of them, where the middle switch in each bridge is shared by the AC....../DC rectifier and DC/AC inverter. A small size DC-link capacitor can be achieved through coordination control of rectifier and inverter to cancel the second-order oscillation power. Maximum available phase difference between rectifier’s and inverter’s modulation references is investigated to be dependent...... on their modulation indices of the six-switch converter, and high modulation indices are proved to be feasible for second-order power cancellation in the DC-link based on the phase difference analysis. Both reduced switch numbers and DC electrolytic capacitor size can be achieved using the proposed converter...

  14. Growth rate anisotropy and absorption studies on β-BaB 2O 4 single crystals grown by the top-seeded solution growth technique

    Science.gov (United States)

    Bhatt, Rajeev; Ganesamoorthy, S.; Bhaumik, Indranil; Karnal, A. K.; Wadhawan, V. K.

    2007-03-01

    Beta barium borate (β-BaB2O4; BBO) single crystals have been grown from Na2O flux by the TSSG technique and the observed growth rate anisotropy is reported. The symmetrical conoscopic interference pattern on the c-cut plate confirmed strain-free and optical homogeneity of the crystals. The observed growth habits of as-grown crystals are explained using crystal growth theories. The relative growth rate along different crystallographic directions of BBO can be described by R[100] = R[010] > R[001]. The absorption measurements show a nearly 9 nm shift in fundamental absorption edges in X and Z cut samples. Band gap energies measured were 6.45 and 6.2 eV along the X and Z directions, respectively. The absorption spectra near the fundamental absorption edges (AE) follow Urbach's rule.

  15. Insights into chirality distributions of single-walled carbon nanotubes grown on different CoxMg1-xO solid solutions

    DEFF Research Database (Denmark)

    He, Maoshuai; Jiang, Hua; Kauppi, Inkeri

    2014-01-01

    environmental transmission electron microscopy studies. In contrast, SWNTs grow on the impregnation-prepared CoxMg 1-xO by "base growth" mode. "Base growth" is attributed to strong metal-support interactions between the epitaxially formed Co nanoparticles and the underlying MgO support, accounting......Low-temperature chemical vapor deposition (CVD) growth of single-walled carbon nanotubes (SWNTs) was achieved on two different types of Co xMg1-xO catalysts prepared by different techniques: atomic layer deposition (ALD) and impregnation. The chirality distribution of SWNTs grown on the ALD...... for the synthesis of SWNTs with high chiral-selectivity. In addition, impregnation-prepared Co xMg1-xO catalysts calcinated at different temperatures were systematically studied and their catalytic performances in synthesizing carbon nanotubes were elucidated. This work illustrates the influence of metal...

  16. Studies on the growth aspects, structural, thermal, dielectric and third order nonlinear optical properties of solution grown 4-methylpyridinium p-nitrophenolate single crystal

    Science.gov (United States)

    Devi, S. Reena; Kalaiyarasi, S.; Zahid, I. MD.; Kumar, R. Mohan

    2016-11-01

    An ionic organic optical crystal of 4-methylpyridinium p-nitrophenolate was grown from methanol by slow evaporation method at ambient temperature. Powder and single crystal X-ray diffraction studies revealed the crystal system and its crystalline perfection. The rocking curve recorded from HRXRD study confirmed the crystal quality. FTIR spectral analysis confirmed the functional groups present in the title compound. UV-visible spectral study revealed the optical window and band gap of grown crystal. The thermal, electrical and surface laser damage threshold properties of harvested crystal were examined by using TGA/DTA, LCR/Impedance Analyzer and Nd:YAG laser system respectively. The third order nonlinear optical property of grown crystal was elucidated by Z-scan technique.

  17. Siemens IT solutions for power sector. PROFIT solutions

    International Nuclear Information System (INIS)

    Lunter, P.

    2004-01-01

    The cost reduction, flexibility and revenue increase, potential exploitation, productivity increase, and business opportunities exploitation - that is all what can be required in the races for the promonent positioning on the electricity power market. These requirements can be realized by the sophisticated IT solutions hand-tailored to the special requirements of the electric power producers and tradesmen. This approach makes it possible to achieve greater profit. Our solutions 'PROFIT Solutions', that are symbiosis of the most progressive information technologies and the power plant techniques of the company Siemens, satisfy submitted specifications in substantial measure. The system solutions 'PROFIT Solutions' comprise three solution groups: process, operation a business. The solutions of the group 'IT Process Solutions' increase flexibility and manoeuvrability of equipment, improve the efficiency and contribute to more economical operation of the power generation. Solutions 'IT Process Solutions' simplify and shorten the period of power cycles and conduce to higher labour productivity. Solutions group 'IT Process Solutions' approaches equipment to the market - supports the profit strategies, helps quickly and expertly to determine and predict hazards. The extension PROFIT Cockpit means the nuance to the solutions world 'PROFIT Solutions'. The survey about the whole installation is within reach at the simple touch of a button. It is possible to compile the total system part by part from single solutions 'PROFIT Solutions'. As a matter of fact all single parts can be interconnected with already existing solutions. Routines 'PROFIT Solutions' cooperate with all modern control systems. (author)

  18. Studies on the effect of different operational parameters on the crystallization kinetics of α-lactose monohydrate single crystals in aqueous solution

    Science.gov (United States)

    Parimaladevi, P.; Srinivasan, K.

    2014-09-01

    Supersaturation dependent nucleation, size and morphology of alpha-lactose monohydrate (α-LM) crystals from aqueous solution were investigated by adopting two different crystallization methods, slow evaporation and fast evaporation, in the supersaturation range between σ=0.05 and 1.30. The induction period of nucleation is comparatively long in case of slow evaporation and is very short in case of fast evaporation process as the interconversion between α-L and β-L is uncontrollable in the former and is under control in the latter case. Moreover α-LM crystals with tomahawk morphology were obtained throughout the supersaturation range by slow evaporation method whereas crystals with tomahawk, triangular and needle-like morphologies were obtained in supersaturation ranges σ=0.05-0.5, σ=0.5-0.9 and σ=0.9-1.30 respectively by fast evaporation method. Experimentally observed nucleation parameters were verified with theoretically deuced values. It is realized that the fast evaporation method employed in the present study is found to be highly efficient in controlling the interconversion between α-L and β-L as well as in suppressing the inhibitory activity of β molecule on the nucleation and growth of α-LM crystals when compared to conventional slow evaporation method and is successful in producing the industrially preferred needle-like crystals at high supersaturation ranges.

  19. Sub-second photonic processing of solution-deposited single layer and heterojunction metal oxide thin-film transistors using a high-power xenon flash lamp

    KAUST Repository

    Tetzner, Kornelius

    2017-11-01

    We report the fabrication of solution-processed In2O3 and In2O3/ZnO heterojunction thin-film transistors (TFTs) where the precursor materials were converted to their semiconducting state using high power light pulses generated by a xenon flash lamp. In2O3 TFTs prepared on glass substrates exhibited low-voltage operation (≤2 V) and a high electron mobility of ∼6 cm2 V−1 s−1. By replacing the In2O3 layer with a photonically processed In2O3/ZnO heterojunction, we were able to increase the electron mobility to 36 cm2 V−1 s−1, while maintaining the low-voltage operation. Although the level of performance achieved in these devices is comparable to control TFTs fabricated via thermal annealing at 250 °C for 1 h, the photonic treatment approach adopted here is extremely rapid with a processing time of less than 18 s per layer. With the aid of a numerical model we were able to analyse the temperature profile within the metal oxide layer(s) upon flashing revealing a remarkable increase of the layer\\'s surface temperature to ∼1000 °C within ∼1 ms. Despite this, the backside of the glass substrate remains unchanged and close to room temperature. Our results highlight the applicability of the method for the facile manufacturing of high performance metal oxide transistors on inexpensive large-area substrates.

  20. Clinical study of single-visit root canal treatment with a nickel-titanium (Ni-Ti) rotary instrument combined with different ultrasonic irrigation solutions for elderly patients with chronic apical periodontitis.

    Science.gov (United States)

    Tang, Zhenyu; Wang, Hui; Jiang, Shiyong

    2015-01-01

    The study involved 300 elderly patients with chronic periapical periodontitis. The patients were randomly assigned into three groups. The treatment for group A used a Mtwo Ni-Ti rotary instrument combined with ultrasonic irrigation of a 2.5% NaOCl solution. The group B used the same instrument combined with ultrasonic irrigation of an active silver ion antibacterial solution. The group C used the same instrument combined with syringe irrigation of a 2.5% NaOCl solution. The root canal fillings were performed immediately after canal preparation. Twenty-four hours after the procedure, patients self-assessed pain levels according to the VAS table. The three groups returned after seven days so their postoperative acute reactions could be evaluated clinically. After six and twelve months, efficacy was evaluated. The self-assessed pain levels for group A and B were significantly lower than group C. The incidence of postoperative acute reactions after seven days for group A and B were significantly lower than those of group C. The effective rates after six and twelve months did not differ among these groups. The single-visit root canal treatment with a nickel-titanium rotary instrument combined with ultrasonic irrigation for elderly patients with chronic periapical periodontitis achieved short and long term efficacy and stability.

  1. Estimating central tendency from a single spot measure: A closed-form solution for lognormally distributed biomarker data for risk assessment at the individual level.

    Science.gov (United States)

    Pleil, Joachim D; Sobus, Jon R

    2016-01-01

    Exposure-based risk assessment employs large cross-sectional data sets of environmental and biomarker measurements to predict population statistics for adverse health outcomes. The underlying assumption is that long-term (many years) latency health problems including cancer, autoimmune and cardiovascular disease, diabetes, and asthma are triggered by lifetime exposures to environmental stressors that interact with the genome. The aim of this study was to develop a specific predictive method that provides the statistical parameters for chronic exposure at the individual level based upon a single spot measurement and knowledge of global summary statistics as derived from large data sets. This is a profound shift in exposure and health statistics in that it begins to answer the question "How large is my personal risk?" rather than just providing an overall population-based estimate. This approach also holds value for interpreting exposure-based risks for small groups of individuals within a community in comparison to random individuals from the general population.

  2. A randomized, single-blind trial of 5% minoxidil foam once daily versus 2% minoxidil solution twice daily in the treatment of androgenetic alopecia in women.

    Science.gov (United States)

    Blume-Peytavi, Ulrike; Hillmann, Kathrin; Dietz, Ekkehart; Canfield, Douglas; Garcia Bartels, Natalie

    2011-12-01

    Although twice-daily application of propylene glycol-containing 2% minoxidil topical solution (MTS) stimulates new hair growth, higher concentrations of minoxidil in a once-daily, propylene glycol-free formulation may improve efficacy and reduce unpleasant side effects. We sought to compare the efficacy, safety, and acceptability and to show noninferiority of once-daily 5% minoxidil topical foam (MTF) with twice-daily 2% MTS in women with androgenetic alopecia. A total of 113 women with androgenetic alopecia were randomized to 24 weeks of treatment with 5% MTF or 2% MTS. The primary efficacy parameter was change from baseline in nonvellus target area hair count at week 24. Secondary end points included change in nonvellus target area hair width, overall efficacy by global photographic review as assessed by treatment-blinded evaluators and the subject herself, adverse events, and participants' assessment of product aesthetics. After 24 weeks, women randomized to 5% MTF once daily showed noninferior target area hair count and target area hair width and experienced greater, but nonsignificant, improvements in target area hair count, target area hair width, and overall efficacy by global photographic review than those randomized to 2% MTS used twice daily. 5% MTF was significantly superior to 2% MTS in participants' agreement with "the treatment does not interfere with styling my hair" (P = .002). Women randomized to 5% MTF experienced significantly lower rates of local intolerance (P = .046) especially in pruritus and dandruff compared with 2% MTS. Because of differences in the formulations tested, study participants were not blinded to treatment. Once-daily 5% MTF is noninferior and as effective for stimulating hair growth as twice-daily 2% MTS in women with androgenetic alopecia and is associated with several aesthetic and practical advantages. Copyright © 2010 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  3. Distinction between upper and lower gastrointestinal perforation: Usefulness of the periportal free air sign on computed tomography

    International Nuclear Information System (INIS)

    Cho, Hyun Sun; Yoon, Seong Eon; Park, Seong Hoon; Kim, Hyewon; Lee, Young-Hwan; Yoon, Kwon-Ha

    2009-01-01

    Purpose: To evaluate the usefulness of the periportal free air (PPFA) sign on computed tomography (CT) to distinguish upper from lower gastrointestinal (GI) tract perforation. Materials and methods: During a 30-month period, we retrospectively analyzed abdominal CT images of 53 consecutive patients with surgically proven GI tract perforation. We divided the patients into two groups, i.e. upper and lower GI tract perforation groups. According to the distribution of free air, we divided the peritoneal cavity into supramesocolic compartment and inframesocolic compartment. We observed the presence or absence of free air in each compartment in each group. When there was free air in the periportal area, it was defined as periportal free air (PPFA) and the sign was positive. To evaluate the usefulness of the PPFA sign, we compared the PPFA sign with the falciform ligament sign and the ligamentum teres sign, both of which are well-known CT signs of pneumoperitoneum. Statistical analyses were performed with univariate and multivariate analyses using SPSS version 11.5 for significant findings among the CT signs. Results: Free air was seen in supramesocolic compartment in 29 of 30 (97%) patients in the upper GI perforation group and in 17 of 23 (74%) in the lower GI perforation group. Free air in inframesocolic compartment did not show significant difference in either group (p = .16). The PPFA sign was seen in 28 of 30 (93%) patients with upper GI tract perforation, but in only 8 of 23 (35%) patients with lower GI tract perforation (p < .0001). The falciform ligament sign was seen in 24 of 30 (80%) patients with upper GI tract perforation and in 10 of 23 (43%) patients with lower GI tract perforation (p = .020). The ligamentum teres sign was seen in 16 of 30 (53%) patients with upper GI tract perforation and in 2 of 23 (8%) patients with lower GI tract perforation (p = .008). Multivariate logistic regression analysis showed that the PPFA sign was the only variable, which

  4. Top-seed solution growth and characterization of AlSb single crystals for gamma-ray detectors. Final report, 1 October 1994 - 30 September 1995

    International Nuclear Information System (INIS)

    Witt, A.F.; Becla, P.; Counterman, C.; DiFrancesco, J.; Landahl, G.; Morse, K.; Sanchez, J.

    1996-01-01

    The ultimate objective of the conducted research is to ascertain the potential of AlSb (in single crystal form) for application as γ-detector material operating at room temperature. To this end approaches to crystal growth were to be developed which permit control of growth parameters affecting critical application specific properties of AlSb. The research was focused on exploration of the effectiveness of the Czochralski method and on the development of methods and procedures leading to AlSb crystals with low free carrier concentration and a high mobility-lifetime product. Conventional melt growth of AlSb by the Czochralski technique (from stoichiometric charges) generally yielded material with high net carrier concentrations and low mobility-lifetime products. Significant improvement in crystal properties was achieved, when operating with non-stoichiometric melts, containing Sb in excess at levels of 3 to 10 mol%, further improvements were obtained when changing ambient argon pressure from atmospheric to 300 psi, and using high purity alumina crucibles which were inductively heated with a graphite susceptor CVD coated with silicon-carbide. Initial efforts to reduce evaporative loss of Sb through application of the LEC technique (liquid encapsulated Czochralski) with conventional encapsulants (B 2 O 3 , LiF, CaF 2 ) failed because of their interaction with the crucible and the AlSb melt. Compensation techniques (based on extrinsic doping) were found to lead to the desired reduction of free carriers in AlSb. Such material, however, exhibits a significant decrease of charge carrier mobility and lifetime. Early termination of this research program prevented optimization of critical materials properties in AlSb and precluded at this time a realistic assessment of the potential of this material for solid state detector applications

  5. Separation based adsorption of ethanol-water mixture in azeotropic solution by single-walled carbon, boron-nitride and silicon-carbide nanotubes.

    Science.gov (United States)

    Taheri, Siavash; Lakmehsari, Muhammad Shadman; Soltanabadi, Azim

    2017-08-01

    The separation of the azeotropic ethanol-water mixture (95.57wt% ethanol) over a wide range of pressures (100-100000kPa) was studied on armchair SWCNTs, SWSiCNTs and SWBNNTs with different diameters at 351.30K using GCMC simulations. The GCMC results demonstrated that ethanol and water molecules form a monolayer single-file, chain together in the center of (6,6) SWCNT, while a spiral ring of ethanol and water is formed in the center of (8,8), (10,10) and (12,12) SWCNTs. It was found that in SWCNTs, the adsorption of ethanol reduces the function of pressure, while water adsorption increases its function. Water selectivity rises as a function of pressure. Also, in SWBNNTs, the adsorption of water increases as a function of pressure, while ethanol adsorption is almost constant. However, in the case of SWSiCNTs, ethanol and water adsorptions are very similar to those of SWBNNTs, whereas the adsorptivities of SWSiCNTs are more than those of SWBNNTs. Our findings regarding adsorption and slope of adsorption indicate that higher pressures are favorable for separating water and ethanol by SWCNTs, while SWBNNTs and SWSiCNTs are demonstrate higher ethanol adsorptivities in lower pressures. Also, MD simulations have been performed to study the microscopic structure and diffusion of binary mixtures of water and ethanol within SWCNTs, SWSiCNTs and SWBNNTs. The MD simulations imply that the oxygen atoms are highly well-organized around themselves. Also, the MD results illustrate a similar tendency for oxygen of water (OW) and oxygen of ethanol (OE) to the wall of the nanotubes in all the pressures. In addition, from the MD results, self-diffusion of water and ethanol in all nanotubes were calculated and discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Preparation and characterization of Bi2Sr2CaCu2O8+δ thin films on MgO single crystal substrates by chemical solution deposition

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Kepa, Katarzyna; Hlásek, T.

    2013-01-01

    Bi2Sr2CaCu2O8 thin films have been deposited on MgO single crystal substrates by spin-coating a solution based on 2-ethylhexanoate precursors. Pyrolysis takes place between 200°C and 450°C and is accompanied by the release of 2-ethylhexanoic acid, CO2 and H2O vapour. Highly c-axis oriented Bi2Sr2Ca......Cu2O8 films were obtained after heat treatment at 840°C in air. The highest Tc of 81K was measured in a 10-layer film. Subsequent post-annealing in Ar and pure O2 did not improve the superconducting properties of the films and resulted in the appearance of Bi2CaCuO5 or Bi2(Sr, Ca)2CuO6 impurities....

  7. Influence of solution pH on the electron transport of the self-assembled nanoarrays of single-walled carbon nanotube-cobalt tetra-aminophthalocyanine on gold electrodes: Electrocatalytic detection of epinephrine

    Energy Technology Data Exchange (ETDEWEB)

    Ozoemena, Kenneth I. [Chemistry Department, University of Pretoria, Pretoria 0002 (South Africa)], E-mail: kenneth.ozoemena@up.ac.za; Nkosi, Dudu; Pillay, Jeseelan [Chemistry Department, University of Pretoria, Pretoria 0002 (South Africa)

    2008-02-15

    This paper provides first evidence of the impact of solution pH on the heterogeneous electron transfer rate constants of self-assembled films of single-walled carbon nanotubes (SWCNT) and SWCNT integrated to cobalt(II)tetra-aminophthalocyanine (SWCNT-CoTAPc) by sequential self-assembly. Using cyclic voltammetry and electrochemical impedance spectroscopy, we proved that both SAMs exhibit notable differences in their response to different buffered solution pH, with and without the presence of redox probe, [Fe(CN){sub 6}]{sup 4-}/[Fe(CN){sub 6}]{sup 3-}. Surface pK{sub a} value for the Au-Cys-SWCNT-CoTAPc was estimated as ca. 7.8, compared to that of the Au-Cys-SWCNT of about 5.5. Interestingly, both redox-active SAMs gave similar analytical response for epinephrine, giving well-resolved square wave voltammograms, with linear concentration range up to 130 {mu}M, sensitivity of ca. 9.4 x 10{sup -3} AM{sup -1}, and limit of detection ca. 6 {mu}M. This analytical result implies that there is no detectable advantage of one of the SAMs over the other in the electrocatalytic detection of this neurotransmitter.

  8. Calculus problems and solutions

    CERN Document Server

    Ginzburg, Abraham

    2011-01-01

    Ideal for self-instruction as well as for classroom use, this text helps students improve their understanding and problem-solving skills in analysis, analytic geometry, and higher algebra. More than 1,200 problems appear in the text, with concise explanations of the basic notions and theorems to be used in their solution. Many are followed by complete answers; solutions for the others appear at the end of the book. Topics include sequences, functions of a single variable, limit of a function, differential calculus for functions of a single variable, fundamental theorems and applications of dif

  9. Viscosity Solution

    OpenAIRE

    Camilli, Fabio; Prados, Emmanuel

    2011-01-01

    International audience; Viscosity solution is a notion of weak solution for a class of partial differential equations of Hamilton-Jacobi type. The range of applications of the notions of viscosity solution and Hamilton-Jacobi equations is enormous, including common class of partial differential equations such as evolutive problems and problems with boundary conditions, equations arising in optimal control theory, differential games, second-order equations arising in stochastic optimal control...

  10. Pantothenate kinase 2 mutation with classic pantothenate-kinase-associated neurodegeneration without 'eye-of-the-tiger' sign on MRI in a pair of siblings

    International Nuclear Information System (INIS)

    Zolkipli, Zarazuela; Surtees, Robert; Dahmoush, Hisham; Saunders, Dawn E.; Kling Chong, W.K.

    2006-01-01

    It has been postulated that all patients with pantothenate kinase 2 (PANK2) mutations causing pantothenate-kinase-associated neurodegeneration (PKAN) are associated with the 'eye-of-the-tiger' sign on MRI. We report a pair of siblings who presented with dystonia and who have been found to be homozygous for 104C>A, S35X mutation, confirming the diagnosis of PKAN. They do not have the typical iron deposition in the globi pallida or substantia nigra on MR imaging. (orig.)

  11. Solution preparation

    International Nuclear Information System (INIS)

    Seitz, M.G.

    1982-01-01

    Reviewed in this statement are methods of preparing solutions to be used in laboratory experiments to examine technical issues related to the safe disposal of nuclear waste from power generation. Each approach currently used to prepare solutions has advantages and any one approach may be preferred over the others in particular situations, depending upon the goals of the experimental program. These advantages are highlighted herein for three approaches to solution preparation that are currently used most in studies of nuclear waste disposal. Discussion of the disadvantages of each approach is presented to help a user select a preparation method for his particular studies. Also presented in this statement are general observations regarding solution preparation. These observations are used as examples of the types of concerns that need to be addressed regarding solution preparation. As shown by these examples, prior to experimentation or chemical analyses, laboratory techniques based on scientific knowledge of solutions can be applied to solutions, often resulting in great improvement in the usefulness of results

  12. Multipolar Solutions

    OpenAIRE

    Quevedo, Hernando

    2012-01-01

    A class of exact solutions of the Einstein-Maxwell equations is presented which contains infinite sets of gravitoelectric, gravitomagnetic and electromagnetic multipole moments. The multipolar structure of the solutions indicates that they can be used to describe the exterior gravitational field of an arbitrarily rotating mass distribution endowed with an electromagnetic field. The presence of gravitational multipoles completely changes the structure of the spacetime because of the appearance...

  13. From Goods to Solutions

    DEFF Research Database (Denmark)

    Chakkol, Mehmet; Johnson, Mark; Raja, Jawwad

    2014-01-01

    Purpose – This paper aims to adopt service-dominant logic (SDL) to empirically explore network configurations resulting from the provision of goods, goods and services, and solutions. Design/methodology/approach – This paper uses a single, in-depth, exploratory case study in a truck manufacturer......: dyadic, triadic and tetradic. The extent to which different network actors contribute to value co-creation varies across the offerings. Research limitations/implications – This paper is based on a single, in-depth case study developed in one industrial context. Whilst this represents an appropriate...

  14. Siemens IT solutions for power sector

    International Nuclear Information System (INIS)

    Lunter, P.

    2004-01-01

    The cost reduction, flexibility and revenue increase, potential exploitation, productivity increase, and business opportunities exploitation - that is all what can be required in the races for the promonent positioning on the electricity power market. These requirements can be realized by the sophisticated IT solutions hand-tailored to the special requirements of the electric power producers and tradesmen. This approach makes it possible to achieve greater profit. Our solutions 'PROFIT Solutions', that are symbiosis of the most progressive information technologies and the power plant techniques of the company Siemens, satisfy submitted specifications in substantial measure. The system solutions 'PROFIT Solutions' comprise three solution groups: process, operation a business. The solutions of the group 'IT Process Solutions' increase flexibility and manoeuvrability of equipment, improve the efficiency and contribute to more economical operation of the power generation. Solutions 'IT Process Solutions' simplify and shorten the period of power cycles and conduce to higher labour productivity. Solutions group 'IT Process Solutions' approaches equipment to the market - supports the profit strategies, helps quickly and expertly to determine and predict hazards. The extension PROFIT Cockpit means the nuance to the solutions world 'PROFIT Solutions'. The survey about the whole installation is within reach at the simple touch of a button. It is possible to compile the total system part by part from single solutions 'PROFIT Solutions'. As a matter of fact all single parts can be interconnected with already existing solutions. Routines 'PROFIT Solutions' cooperate with all modern control systems. (author)

  15. Polymer solutions

    Science.gov (United States)

    Krawczyk, Gerhard Erich [Bremen, DE; Miller, Kevin Michael [West Dundee, IL

    2011-07-26

    There is provided a method of making a polymer solution comprising polymerizing one or more monomer in a solvent, wherein said monomer comprises one or more ethylenically unsaturated monomer that is a multi-functional Michael donor, and wherein said solvent comprises 40% or more by weight, based on the weight of said solvent, one or more multi-functional Michael donor.

  16. Solution Prototype

    DEFF Research Database (Denmark)

    Efeoglu, Arkin; Møller, Charles; Serie, Michel

    2013-01-01

    environment. The solution prototype that is composed from blending product and service prototype has particular impacts on the dualism of DSR’s “Build” and “Evaluate”. Since the mix between product and service prototyping can be varied, there is a demand for a more agile and iterative framework. Van de Ven...

  17. Podcast solutions

    CERN Document Server

    Geoghegan, Michael W

    2005-01-01

    Podcasting is the art of recording radio show style audio tracks, then distributing them to listeners on the Web via podcasting software such as iPodder. From downloading podcasts to producing a track for fun or profit, ""Podcast Solutions"" covers the entire world of podcasting with insight, humor, and the unmatched wisdom of experience.

  18. Comparison of non-ideal solution theories for multi-solute solutions in cryobiology and tabulation of required coefficients.

    Science.gov (United States)

    Zielinski, Michal W; McGann, Locksley E; Nychka, John A; Elliott, Janet A W

    2014-10-01

    Thermodynamic solution theories allow the prediction of chemical potentials in solutions of known composition. In cryobiology, such models are a critical component of many mathematical models that are used to simulate the biophysical processes occurring in cells and tissues during cryopreservation. A number of solution theories, both thermodynamically ideal and non-ideal, have been proposed for use with cryobiological solutions. In this work, we have evaluated two non-ideal solution theories for predicting water chemical potential (i.e. osmolality) in multi-solute solutions relevant to cryobiology: the Elliott et al. form of the multi-solute osmotic virial equation, and the Kleinhans and Mazur freezing point summation model. These two solution theories require fitting to only single-solute data, although they can make predictions in multi-solute solutions. The predictions of these non-ideal solution theories were compared to predictions made using ideal dilute assumptions and to available literature multi-solute experimental osmometric data. A single, consistent set of literature single-solute solution data was used to fit for the required solute-specific coefficients for each of the non-ideal models. Our results indicate that the two non-ideal solution theories have similar overall performance, and both give more accurate predictions than ideal models. These results can be used to select between the non-ideal models for a specific multi-solute solution, and the updated coefficients provided in this work can be used to make the desired predictions. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  19. Transport phenomena during nanofiltration of concentrated solutions

    NARCIS (Netherlands)

    Bargeman, Gerrald

    2016-01-01

    In most scientific studies on nanofiltration either the development of new membrane materials or the characterization of membranes is reported. In the latter case most studies use single solute salt or sugar solutions and/or investigate nanofiltration of solutions with mixtures of ions at low

  20. Presence of multi-segment clot sign on dynamic CT angiography: a predictive imaging marker of recanalisation and good outcome in acute ischaemic stroke patients.

    Science.gov (United States)

    Shi, Feina; Chen, Zhicai; Gong, Xiaoxian; Zhang, Meixia; Liebeskind, David S; Lou, Min

    2018-03-13

    To investigate the value of multi-segment clot (MSC) sign on dynamic CT angiography (CTA) in predicting recanalisation and outcome after reperfusion therapy in acute ischaemic stroke (AIS) with large artery occlusion (LAO). We retrospectively reviewed data of anterior circulation LAO patients from a prospectively collected database for consecutive AIS patients who underwent perfusion CT (CTP) before treatment. MSC sign was defined as the presence of multiple segments on dynamic CTA derived from CTP data. Good outcome was defined as modified Rankin score 0-3 at 90 days. A total of 181 LAO patients were enrolled. MSC sign was present in 73 (40.3%) patients. When compared with patients without MSC sign, patients with MSC sign had a significantly higher rate of recanalisation (76.7% versus 56.5%, p = 0.005) and good outcome (67.1% versus 51.0%, p = 0.035). Multivariable logistic regression analyses showed that MSC sign was an independent predictor for both recanalisation (OR [95% CI] = 2.237 [1.069-4.681]; p = 0.033) and good outcome (OR [95% CI] = 2.715 [1.154-6.388]; p = 0.022) after adjustment. The MSC sign is a good indicator for recanalisation and good outcome after reperfusion therapy in anterior circulation LAO patients. • MSC sign was present in about 40% acute anterior circulation LAO patients. • MSC sign is a predictor for recanalisation after reperfusion treatment. • Patients with MSC sign have a better outcome.

  1. Correlation of the cross-over ratio of the cross-over sign on conventional pelvic radiographs with computed tomography retroversion measurements

    International Nuclear Information System (INIS)

    Werner, Clement M.L.; Copeland, Carol E.; Stromberg, Jeff; Ruckstuhl, Thomas

    2010-01-01

    To find a correlation between the cross-over ratio of the cross-over sign on conventional anteroposterior (AP) pelvic radiographs and retroversion measurements ('roof-edge angle' and 'equatorial-edge angle) on computed tomography (CT) scans. This would facilitate the interpretation of the cross-over sign regarding the amount of acetabular retroversion. Correctly projected AP pelvic radiographs (2,925 hips) were examined for the presence of the cross-over sign (COS), and the overlap ratio of the COS was measured. On CT scans of the same patients the 'roof-edge angle' (RE angle) and the 'equatorial-edge angle' (EE angle) were also calculated. A statistically significant but only weak relationship could be found between the overlap ratio of the COS and the 'roof-edge angle' (P < 0.0001; correlation coefficient -0.486) and between this ratio and the 'equatorial-edge angle' (P < 0.0001; correlation coefficient -0.395). A relationship between the overlap ratio and orientation measurements on CT scans could be found, but it was less strong than expected. (orig.)

  2. Solution Leaching

    Science.gov (United States)

    Chun, Tiejun; Zhu, Deqing; Pan, Jian; He, Zhen

    2014-06-01

    Recovery of alumina from magnetic separation tailings of red mud has been investigated by Na2CO3 solution leaching. X-ray diffraction (XRD) results show that most of the alumina is present as 12CaO·7Al2O3 and CaO·Al2O3 in the magnetic separation tailings. The shrinking core model was employed to describe the leaching kinetics. The results show that the calculated activation energy of 8.31 kJ/mol is characteristic for an internal diffusion-controlled process. The kinetic equation can be used to describe the leaching process. The effects of Na2CO3 concentration, liquid-to-solid ratio, and particle size on recovery of Al2O3 were examined.

  3. [Signifiance of brush sign on susceptibility-weighted imaging predicts hemorrhagic transformation after intravenous thrombolysis in patients with acute ischemic stroke].

    Science.gov (United States)

    Xu, Chao; Chen, Zhi-cai; Tang, Huan; Xu, Meng-jun; Zhang, Sheng; Sun, Jian-zhong; Lou, Min

    2015-11-01

    To assess brush sign (BS) on susceptibility-weighted imaging (SWI) in prediction of hemorrhagic transformation (HT) in patients with acute ischemic stroke (AIS) after intravenous thrombolysis(IVT). Patients with acute cerebral ischemic stroke, who had major cerebral artery occlusion (internal carotid artery, middle cerebral artery M1 and M2), treated with intravenous recombinant tissue plasminogen activator (rt-PA) from August 2009 to October 2014 in the Second Affiliated Hospital, Zhejiang University School of Medicine, were enrolled in the study. All patients underwent SWI scanning. The asymmetry index (AI) was defined as the difference of intensity between ischemic and normal hemispheres on the SWI phase map; according to AI values patients were divided into 3 groups: BS=0(n=9), BS=1 (n=39) and BS=2 (n=18). The relationships between BS and HT and the clinical outcome among the 3 groups were analyzed. Sixty-six patients aged 68 ± 13 years were included in the study, including 44 males (67%) and 22 females (33%), and 44 (67%) with acute ischemic stroke. The mean pre-treatment National Institutes of Health Stroke Scale (NIHSS) score was 13 (6-17), and the onset to needle time was (252 ± 88) min. Twenty-six (39.4%) patients had HT, including 18 cases (27.3%) with HI and 8 cases (12.1%) with PH; BS was observed more frequently in HT group than non-HT group. Binary logistic regression analysis showed that BS was independently associated with HT of patients with acute ischemic stroke following IVT (OR=2.589, 95% CI: 1.080-6.210, P=0.033). In those without reperfusion after IVT, patients with higher BS grade had higher HT rate (P=0.023). Brush sign on SWI can be used for predicting hemorrhagic transformation after intravenous thrombolysis in patients with acute ischemic stroke.

  4. A comparative study of the blend sign and the black hole sign on CT as a predictor of hematoma expansion in spontaneous intracerebral hemorrhage.

    Science.gov (United States)

    Li, Ruili; Yang, Mingfei

    2017-01-01

    Hematoma expansion (HE) is a major determinant of a poor outcome in patients with a spontaneous intracerebral hemorrhage (sICH). The blend sign and the black hole sign are distinguished from non-contrast CT (NCCT) in patients with sICH, and both are independent neuroimaging predictors of HE. The purpose of the current study was to compare the value of the two signs in the prediction of HE. We retrospectively analyzed clinical and neuroimaging data from 228 patients with sICH who were treated at our hospital between August 2015 and September 2017. NCCT of the brain was performed upon admission (within 6 h of the onset of symptoms) to identify the blend sign and the black hole sign. HE was determined based on CT during a follow-up 24 h later. The sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) with which the blend sign and the black hole sign predicted HE were calculated. Receiver operating characteristic (ROC) curve analysis was performed in order to compare the accuracy of the two signs in predicting HE. The blend sign was identified in 46 patients (20.2%) and the black hole sign was identified in 38 (16.7%) based on NCCT of the brain upon admission. Of the 65 patients with HE, the blend sign was noted in 28 and the black hole sign was noted in 22. The blend sign had a sensitivity of predicting HE of 43.1%, a specificity of 89.0%, a PPV of 60.9%, and an NPV of 79.7%. In contrast, the black hole sign had a sensitivity of predicting HE of 33.9%, a specificity of 90.2%, a PPV of 57.9%, and an NPV of 77.4%. The area under the ROC curve was 0.660 for the blend sign and 0.620 for the black hole sign (p = 0.516). In conclusion, the blend sign and the black hole sign on CT are both good predictors of HE in patients with sICH, though the blend sign seems to have a higher level of accuracy.

  5. What determines the periportal free air, and ligamentum teres and falciform ligament signs on CT: Can these specific air distributions be valuable predictors of gastroduodenal perforation?

    International Nuclear Information System (INIS)

    Choi, A Lam; Jang, Kyung Mi; Kim, Min-Jeong; Koh, Sung Hye; Lee, Yul; Min, Kwangseon; Choi, Dongil

    2011-01-01

    Purpose: The purpose of this retrospective study was to determine what gives rise to the periportal free air, and ligamentum teres and falciform ligament signs on CT in patients with gastrointestinal (GI) tract perforation, and whether these specific air distributions can play a clinically meaningful role in the diagnosis of gastroduodenal perforation. Material and methods: Ninety-three patients who underwent a diagnostic CT scan before laparotomy for a GI tract perforation were included. The readers assessed the presence of specific air distributions on CT (periportal free air, and ligamentum teres and falciform ligament signs). The readers also assessed the presence of strong predictors of gastroduodenal perforation (focal defects in the stomach and duodenal bulb wall, concentrated extraluminal air bubbles in close proximity to the stomach and duodenal bulb, and wall thickening at the stomach and duodenal bulb). The specific air distributions were assessed according to perforation sites, and the elapsed time and amount of free air, and then compared with the strong predictors of gastroduodenal perforation by using statistical analysis. Results: All specific air distributions were more frequently present in patients with gastroduodenal perforation than lower GI tract perforation, but only the falciform ligament sign was statistically significant (p < 0.05). The presence of all three specific air distributions was demonstrated in only 13 (20.6%) of 63 patients with gastroduodenal perforation. Regardless of the perforation sites, the falciform ligament sign was present significantly more frequently with an increase in the amount of free air on multiple logistic regression analysis (adjusted odds ratio, 1.29; p < 0.001). The sensitivity, specificity, accuracy, and positive predictive and negative predictive values of each strong predictor for the diagnosis of gastroduodenal perforation were higher than those of specific air distributions. The focal wall thickening

  6. Periodic Solutions for a Delayed Population Model on Time Scales

    OpenAIRE

    Kejun Zhuang; Zhaohui Wen

    2010-01-01

    This paper deals with a delayed single population model on time scales. With the assistance of coincidence degree theory, sufficient conditions for existence of periodic solutions are obtained. Furthermore, the better estimations for bounds of periodic solutions are established.

  7. OPeNDAP servers like Hyrax and TDS can easily support common single-sign-on authentication protocols using the Apache httpd and related software; adding support for these protocols to clients can be more challenging

    Science.gov (United States)

    Gallagher, J. H. R.; Potter, N.; Evans, B. J. K.

    2016-12-01

    OPeNDAP, in conjunction with the Australian National University, documented the installation process needed to add authentication to OPeNDAP-enabled data servers (Hyrax, TDS, etc.) and examined 13 OPeNDAP clients to determine how best to add authentication using LDAP, Shibboleth and OAuth2 (we used NASA's URS). We settled on a server configuration (architecture) that uses the Apache web server and a collection of open-source modules to perform the authentication and authorization actions. This is not the only way to accomplish those goals, but using Apache represents a good balance between functionality, leveraging existing work that has been well vetted and includes support for a wide variety of web services, include those that depend on a servlet engine such as tomcat (which both Hyrax and TDS do). Or work shows how LDAP, OAuth2 and Shibboleth can all be accommodated using this readily available software stack. Also important is that the Apache software is very widely used and is fairly robust - extremely important for security software components. In order to make use of a server requiring authentication, clients must support the authentication process. Because HTTP has included authentication for well over a decade, and because HTTP/HTTPS can be used by simply linking programs with a library, both the LDAP and OAuth2/URS authentication schemes have almost universal support within the OPeNDAP client base. The clients, i.e. the HTTP client libraries they employ, understand how to submit the credentials to the correct server when confronted by an HTTP/S Unauthorized (401) response. Interestingly OAuth2 can achieve it's SSO objectives while relying entirely on normative HTTP transport. All 13 of the clients examined worked.The situation with Shibboleth is different. While Shibboleth does use HTTP, it also requires the client to either scrape a web page or support the SAML2.0 ECP profile, which, for programmatic clients, means using SOAP messages. Since working with SOAP is outside the scope of HTTP, support for Shibboleth must be added explicitly into the client software. Some of the potential burden of enabling OPeNDAP clients to work with Shibboleth may be mitigated by getting both NetCDF-C and NetCDF-Java libraries to use the Shibboleth ECP profile. If done, this would get 9 of the 13 clients we examined working.

  8. An isoindigo containing donor-acceptor polymer: synthesis and photovoltaic properties of all-solution-processed ITO- and vacuum-free large area roll-coated single junction and tandem solar cells

    DEFF Research Database (Denmark)

    Brandt, Rasmus Guldbæk; Yue, Wei; Andersen, Thomas Rieks

    2015-01-01

    In this work, the design, synthesis, and characterization of a donor-acceptor polymer from dithieno[3,2-b:2',3'-d]pyrrole and isoindigo (i-ID) are presented. The synthesized polymer has been applied in large area ITO-free organic photovoltaics, both as spin coated and roll coated devices; the lat......In this work, the design, synthesis, and characterization of a donor-acceptor polymer from dithieno[3,2-b:2',3'-d]pyrrole and isoindigo (i-ID) are presented. The synthesized polymer has been applied in large area ITO-free organic photovoltaics, both as spin coated and roll coated devices......; the latter as both single junction and multi junction organic photovoltaic (OPV) architectures....

  9. Formation of an Ion-Pair Molecule with a Single NH+...Cl- Hydrogen Bond: Raman spectra of 1,1,3,3-Tetramethylguanidinium chloride in the solid state, in solution and in the vapor phase

    DEFF Research Database (Denmark)

    Berg, Rolf W.; Riisager, Anders; Fehrmann, Rasmus

    2008-01-01

    Some ionic compounds (salts) form liquids when heated to temperatures in the range of 200-300 °C. They may be referred to as moderate temperature ionic liquids. An example of such a compound is the 1,1,3,3- tetramethylguanidinium chloride, [TMGH]Cl, melting at ∼212 °C. The chemistry of this compo......Some ionic compounds (salts) form liquids when heated to temperatures in the range of 200-300 °C. They may be referred to as moderate temperature ionic liquids. An example of such a compound is the 1,1,3,3- tetramethylguanidinium chloride, [TMGH]Cl, melting at ∼212 °C. The chemistry...... and the dimeric chloride ion-pair salt converged to give geometries near the established crystal structure of [TMGH]Cl. The structures and their binding energies are given as well as calculated vibrational harmonic normal modes (IR and Raman band wavenumbers and intensities). Experimentally obtained Raman...... scattering spectra are presented and assigned, by comparing to the quantum mechanical calculations. It is concluded that dimeric molecular ion pairs with four N-H+ · · · Cl- hydrogen bonds probably exist in the solutions and are responsible for the relatively high solubility of the “salt” in ethanol...

  10. A Dual Egalitarian Solution

    NARCIS (Netherlands)

    Klijn, F.; Slikker, M.; Tijs, S.H.

    2000-01-01

    In this note we introduce an egalitarian solution, called the dual egalitarian solution, that is the natural counterpart of the egalitarian solution of Dutta and Ray (1989).We prove, among others, that for a convex game the egalitarian solution coincides with the dual egalitarian solution for its

  11. Efficacy of a novel sanitizer composed of lactic acid and peroxyacetic acid against single strains of nonpathogenic Escherichia coli K-12, Listeria innocua, and Lactobacillus plantarum in aqueous solution and on surfaces of romaine lettuce and spinach.

    Science.gov (United States)

    Grace Ho, Kai-Lai; Luzuriaga, Diego A; Rodde, Kenneth M; Tang, Shannon; Phan, Cuong

    2011-09-01

    A novel sanitizer composed of lactic acid and peroxyacetic acid (LA-PAA) was developed as an alternative to chlorinated water (CW) for fresh produce processing. Single strains of Lactobacillus plantarum, nonpathogenic Escherichia coli K-12, and Listeria innocua were used to demonstrate the microbial efficacy of LA-PAA. LA-PAA achieved a >7.8-log reduction of L. innocua and L. plantarum suspended in water at 4°C for 20 s, and LA, PAA, and CW achieved reductions of 0.4, 4.8, and 2.7 log, respectively. LA-PAA, when compared with LA, PAA, and CW, enhanced the reduction of L. innocua attached to romaine leaves by >2.2 log, and improved the removal of E. coli attached to spinach leaves by >2.4 log. The exponential improvement in the microbial efficacy of LA-PAA showed synergism between LA and PAA. LA-PAA microbial efficacy was inversely proportional to pH value and directly correlated with residence time and concentration. Despite an improvement in microbial reduction through the addition of surfactant to LA-PAA, the usage of surfactant in washing fresh produce was impeded by excessive foaming during actual processing. Effects of organic matter on the performance of LA-PAA were minimal. External sensory evaluations showed that LA-PAA had no negative effects on the quality of lettuce and tender leaves. Temperature-abuse studies demonstrated that LA-PAA reduced decay by ∼50% when compared with CW. Overall, these results support the premise that LA-PAA has significant potential to be an alternative to CW for fresh produce processing.

  12. Communication dated 11 September 2006 from the Permanent Mission of the Republic of Kazakhstan regarding the Treaty on a Nuclear-Weapon-Free Zone in Central Asia signed on 8 September 2006

    International Nuclear Information System (INIS)

    2007-01-01

    The Secretariat has received a Note Verbale, dated 11 September 2006, from the Permanent Mission of the Republic of Kazakhstan to the IAEA regarding the Treaty on a Nuclear-Weapon-Free Zone in Central Asia signed on 8 September 2006 in Semipalatinsk by the leaders of Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan and Uzbekistan. The Note Verbale and, as requested therein, the enclosed information regarding the Treaty on a Nuclear-Weapon-Free Zone in Central Asia, is reproduced herewith for the information of Member States

  13. Defect free single crystal thin layer

    KAUST Repository

    Elafandy, Rami Tarek Mahmoud

    2016-01-28

    A gallium nitride film can be a dislocation free single crystal, which can be prepared by irradiating a surface of a substrate and contacting the surface with an etching solution that can selectively etch at dislocations.

  14. Static and stationary multiple soliton solutions to the Einstein equations

    International Nuclear Information System (INIS)

    Letelier, P.S.

    1985-01-01

    The application of the Belinsky--Zakharov solution-generating technique, i.e., the inverse scattering method, to generate stationary axially symmetric solutions to the vacuum Einstein equations is reduced to a single quadrature when the seed solution is diagonal. The possibility of having real odd-number soliton solutions is investigated. These solutions represent solitonic perturbations of Euclidean metrics. The possibility of using instantons as seed solutions is also investigated. The one- and two-soliton solutions generated from a diagonal seed solution are studied. As an application, a unified derivation of some well-known static solutions, like the Schwarzschild metric and the Chazy--Curzon metric, as well as other new metrics is presented. By using these metrics as seed solutions, some known stationary solutions, like the Kerr-NUT metric, the double Kerr metric, and the rotating Weyl C-metric, as well as other new metrics are also derived in a unified way

  15. Travelling wave solutions to nonlinear physical models by means of ...

    Indian Academy of Sciences (India)

    On the other hand, considerable attention has been given to problem of finding spe- cial types of analytic solutions to understand biological, physical and chemical phenomena modelled by NPDEs. Among the possible solutions, certain solutions may depend only on a single combination of variables such as travelling wave ...

  16. Growth and characterization of nonlinear optical single crystals: bis ...

    Indian Academy of Sciences (India)

    methoxy benzoate (C4MB) single crystals were successfully grown by the slow evaporation solution growth technique. The harvested crystals were subjected to single-crystal X-ray diffraction, spectral, optical, thermal and mechanical studies in ...

  17. Single-peak solitary wave solutions for the variant Boussinesq ...

    Indian Academy of Sciences (India)

    Zhang and Chen [6] obtained new types of cusped solitons of a partial differential equation by setting the partial differential equation under inhomogeneous .... (ii) For g = 0. If ψ(0) = 0, by eq. (2.8) we know ψ (0) exists. According to the definition of peak point, we have ψ (0) = 0. However, by eq. (2.8) we must have ψ(0) = A, ...

  18. A solution to the single-question crowd wisdom problem.

    Science.gov (United States)

    Prelec, Dražen; Seung, H Sebastian; McCoy, John

    2017-01-25

    Once considered provocative, the notion that the wisdom of the crowd is superior to any individual has become itself a piece of crowd wisdom, leading to speculation that online voting may soon put credentialed experts out of business. Recent applications include political and economic forecasting, evaluating nuclear safety, public policy, the quality of chemical probes, and possible responses to a restless volcano. Algorithms for extracting wisdom from the crowd are typically based on a democratic voting procedure. They are simple to apply and preserve the independence of personal judgment. However, democratic methods have serious limitations. They are biased for shallow, lowest common denominator information, at the expense of novel or specialized knowledge that is not widely shared. Adjustments based on measuring confidence do not solve this problem reliably. Here we propose the following alternative to a democratic vote: select the answer that is more popular than people predict. We show that this principle yields the best answer under reasonable assumptions about voter behaviour, while the standard 'most popular' or 'most confident' principles fail under exactly those same assumptions. Like traditional voting, the principle accepts unique problems, such as panel decisions about scientific or artistic merit, and legal or historical disputes. The potential application domain is thus broader than that covered by machine learning and psychometric methods, which require data across multiple questions.

  19. Classification of single travelling wave solutions to the generalized ...

    Indian Academy of Sciences (India)

    Kuznetsov equation. JIN-YAN HU. Department of Mathematics, Northeast Petroleum University, Daqing 163318, China. E-mail: hujinyan_Alice@163.com; 13836955068@163.com. MS received 20 May 2012; revised 6 December 2012; accepted ...

  20. Solute strengthening at high temperatures

    Science.gov (United States)

    Leyson, G. P. M.; Curtin, W. A.

    2016-08-01

    The high temperature behavior of solute strengthening has previously been treated approximately using various scaling arguments, resulting in logarithmic and power-law scalings for the stress-dependent energy barrier Δ E(τ ) versus stress τ. Here, a parameter-free solute strengthening model is extended to high temperatures/low stresses without any a priori assumptions on the functional form of Δ E(τ ) . The new model predicts that the well-established low-temperature, with energy barrier Δ {{E}\\text{b}} and zero temperature flow stress {τy0} , transitions to a near-logarithmic form for stresses in the regime 0.2intermediate-temperature and the associated transition for the activation volume. Overall, the present analysis unifies the different qualitative models in the literature and, when coupled with the previous parameter-free solute strengthening model, provides a single predictive model for solute strengthening as a function of composition, temperature, and strain rate over the full range of practical utility.

  1. Colliding black hole solution

    International Nuclear Information System (INIS)

    Ahmed, Mainuddin

    2005-01-01

    A new solution of Einstein equation in general relativity is found. This solution solves an outstanding problem of thermodynamics and black hole physics. Also this work appears to conclude the interpretation of NUT spacetime. (author)

  2. Automated uranium determination in solutions

    International Nuclear Information System (INIS)

    Radil, V.; Bankova, Z.; Homolka, V.

    1983-01-01

    An extraction spectrophotometric method was developed for the automated determination of uranium in solutions used in chemical extraction and hydrometallurgical processing of uranium ore. The method is based on the separation of uranium from accompanying elements by extraction from the 6 N HCl medium using tributyl phosphate and on its reaction with the arsenazo 3 reagent in the single phase medium tributyl phosphate - benzene - ethanol - water. An analyzer has been designed and constructed operating on the same principle. The analyzer is discontinuous, peristaltic pumps are used for mixing and dosing the solutions. The evaluation cycle is electronically controlled, the results are recorded with a recorder or digital voltmeter with a printer. (M.D.)

  3. PFP solution stabilization

    Energy Technology Data Exchange (ETDEWEB)

    Aftanas, B.L.

    1996-04-30

    This Functional Design Criteria (FDC) addresses remediation of the plutonium-bearing solutions currently in inventory at the Plutonium Finishing Plant (PFP). The recommendation from the Environmental Impact Statement (EIS) is that the solutions be treated thermally and stabilized as a solid for long term storage. For solutions which are not discardable, the baseline plan is to utilize a denitration process to stabilize the solutions prior to packaging for storage.

  4. Liquid scintillation solution

    International Nuclear Information System (INIS)

    Long, E.C.

    1977-01-01

    A liquid scintillation solution is described which includes (1) a scintillation solvent (toluene and xylene), (2) a primary scintillation solute (PPO and Butyl PBD), (3) a secondary scintillation solute (POPOP and Dimethyl POPOP), (4) a plurality of substantially different surfactants and (5) a filter dissolving and/or transparentizing agent. 8 claims

  5. Proteins in solution: Fractal surfaces in solutions

    Directory of Open Access Journals (Sweden)

    R. Tscheliessnig

    2016-02-01

    Full Text Available The concept of the surface of a protein in solution, as well of the interface between protein and 'bulk solution', is introduced. The experimental technique of small angle X-ray and neutron scattering is introduced and described briefly. Molecular dynamics simulation, as an appropriate computational tool for studying the hydration shell of proteins, is also discussed. The concept of protein surfaces with fractal dimensions is elaborated. We finish by exposing an experimental (using small angle X-ray scattering and a computer simulation case study, which are meant as demonstrations of the possibilities we have at hand for investigating the delicate interfaces that connect (and divide protein molecules and the neighboring electrolyte solution.

  6. Solution mining process

    International Nuclear Information System (INIS)

    Showalter, W.E.

    1984-01-01

    A solution mining process which may be used for uranium, thorium, vanadium, copper, nickel, molybdenum, rhenium, and selenium is claimed. During a first injection-and-production phase of between 6 months and 5 years, a leaching solution is injected through at least one well into the formation to solubilize the mineral values and form a pregnant liquor. This liquor is recovered through another well. The leaching solution contains sulfuric acid, nitric acid, hydrochloric acid, carbonic acid, an alkali metal carbonate, an alkali metal bicarbonate, ammonium carbonate or ammonium bicarbonate. Subsequently during a first production-only phase of between about 2 weeks and one year, injection of the leaching solution is suspended but pregnant liquor is still recovered. This stage is followed by a second injection-and-production phase of between 6 months and 5 years and a second production-only phase. The mineral values are separated from the pregnant liquor to form a barren liquor. The leaching agent is introduced into this liquor, and the solution is recycled. In a second claim for the solution mining of uranium, dilute carbonic acid is used as the leaching solution. The solution has a pH less than 7 and a bicarbonate ion concentration between about 380 ppm and 1000 ppm. The injection-and-production phase lasts between one and two years and the production only phase takes between one and four months. Carbon dioxide is introduced into the barren liquor to form a dilute carbonic acid solution and the solution is recycled

  7. Polyelectrolyte solutions: Excluded-volume considerations

    Science.gov (United States)

    Mattoussi, Hedi; Karasz, Frank E.

    1993-12-01

    We provide experimental evidence for the electrostatically related excluded-volume effects on the colligative properties and the single chain behavior of polyelectrolyte solutions in the dilute regime. The data are compared to the theory developed by Fixman, Skolnick, Odijk, and Houwaart. Good agreement between these theoretical considerations and the experimental data is observed.

  8. Solutions to Organizational Paradox

    DEFF Research Database (Denmark)

    Li, Xin; Worm, Verner; Peihong, Xie

    Organizations face all kinds of paradoxical problems. There exist various solutions to organizational paradoxes. We develop a typology that lists nine possible logical approaches to understanding the relationship between paradoxical opposites, out of which we identify five types of solutions...... to organizational paradox. Four of the five solutions are explicitly associated with four prominent philosophies. We show the relevance of the five solutions to the real world by applying our scheme to understand different solutions to the generic strategy paradox. Finally, we address the question whether...... there is a superior solution and point out the paradox of paradox resolving, namely, paradoxes cannot be resolved once for all and we have to live with them....

  9. Solution deposition assembly

    Science.gov (United States)

    Roussillon, Yann; Scholz, Jeremy H; Shelton, Addison; Green, Geoff T; Utthachoo, Piyaphant

    2014-01-21

    Methods and devices are provided for improved deposition systems. In one embodiment of the present invention, a deposition system is provided for use with a solution and a substrate. The system comprises of a solution deposition apparatus; at least one heating chamber, at least one assembly for holding a solution over the substrate; and a substrate curling apparatus for curling at least one edge of the substrate to define a zone capable of containing a volume of the solution over the substrate. In another embodiment of the present invention, a deposition system for use with a substrate, the system comprising a solution deposition apparatus; at heating chamber; and at least assembly for holding solution over the substrate to allow for a depth of at least about 0.5 microns to 10 mm.

  10. Remoção de metais pesados de efluentes aquosos pela zeólita natural escolecita - influência da temperatura e do pH na adsorção em sistemas monoelementares Heavy metals removal from wastewater by the natural zeolite scolecite - temperature and pH influence in single-metal solutions

    Directory of Open Access Journals (Sweden)

    Ricardo Sarti Jimenez

    2004-10-01

    Full Text Available Cation exchange capabilities of a Brazilian natural zeolite, identified as scolecite, were evaluated for application in wastewater control. We investigated the process of sorption of chromium(III, nickel(II, cadmium(II and manganese(II in synthetic aqueous effluents, including adsorption isotherms of single-metal solutions. The natural zeolite showed the ability to take up the tested heavy metals in the order Cr(III > Cd(II > Ni(II > Mn(II, and this could be related to the valence and the hydration radius of the metal cations. The influence of temperature (25, 40 and 60 ºC and initial pH value (from 4 to 6 was also evaluated. It was found that the adsorption increased substantially when the temperature was raised to 60 ºC and that maximum adsorption capacity was observed at pH 6. These results demonstrate that scolecite can be used for removal of heavy metals from aqueous effluents, under optimized conditions.

  11. Solution (31)P NMR Study of the Acid-Catalyzed Formation of a Highly Charged {U24Pp12} Nanocluster, [(UO2)24(O2)24(P2O7)12](48-), and Its Structural Characterization in the Solid State Using Single-Crystal Neutron Diffraction.

    Science.gov (United States)

    Dembowski, Mateusz; Olds, Travis A; Pellegrini, Kristi L; Hoffmann, Christina; Wang, Xiaoping; Hickam, Sarah; He, Junhong; Oliver, Allen G; Burns, Peter C

    2016-07-13

    The first neutron diffraction study of a single crystal containing uranyl peroxide nanoclusters is reported for pyrophosphate-functionalized Na44K6[(UO2)24(O2)24(P2O7)12][IO3]2·140H2O (1). Relative to earlier X-ray studies, neutron diffraction provides superior information concerning the positions of H atoms and lighter counterions. Hydrogen positions have been assigned and reveal an extensive network of H-bonds; notably, most O atoms present in the anionic cluster accept H-bonds from surrounding H2O molecules, and none of the surface-bound O atoms are protonated. The D4h symmetry of the cage is consistent with the presence of six encapsulated K cations, which appear to stabilize the lower symmetry variant of this cluster. (31)P NMR measurements demonstrate retention of this symmetry in solution, while in situ (31)P NMR studies suggest an acid-catalyzed mechanism for the assembly of 1 across a wide range of pH values.

  12. Liquid scintillation solution

    International Nuclear Information System (INIS)

    Long, E.C.

    1976-01-01

    The invention deals with a liquid scintillation solution which contains 1) a scintillation solvent (toluol), 2) a primary scintillation solute (PPO), 3) a secondary scintillation solute (dimethyl POPOP), 4) several surfactants (iso-octyl-phenol polyethoxy-ethanol and sodium di-hexyl sulfosuccinate) essentially different from one another and 5) a filter resolution and/or transparent-making agent (cyclic ether, especially tetrahydrofuran). (HP) [de

  13. Open notes: doctors and patients signing on.

    Science.gov (United States)

    Delbanco, Tom; Walker, Jan; Darer, Jonathan D; Elmore, Joann G; Feldman, Henry J; Leveille, Suzanne G; Ralston, James D; Ross, Stephen E; Vodicka, Elisabeth; Weber, Valerie D

    2010-07-20

    Few patients read their doctors' notes, despite having the legal right to do so. As information technology makes medical records more accessible and society calls for greater transparency, patients' interest in reading their doctors' notes may increase. Inviting patients to review these notes could improve understanding of their health, foster productive communication, stimulate shared decision making, and ultimately lead to better outcomes. Yet, easy access to doctors' notes could have negative consequences, such as confusing or worrying patients and complicating rather than improving patient-doctor communication. To gain evidence about the feasibility, benefits, and harms of providing patients ready access to electronic doctors' notes, a team of physicians and nurses have embarked on a demonstration and evaluation of a project called OpenNotes. The authors describe the intervention and share what they learned from conversations with doctors and patients during the planning stages. The team anticipates that "open notes" will spread and suggests that over time, if drafted collaboratively and signed by both doctors and patients, they might evolve to become contracts for care.

  14. PERVASIVE BUSINESS INTELLIGENCE SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Rocsana Tonis (Bucea-Manea

    2011-03-01

    Full Text Available The utility of BI solutions is accepted all over the world in the modern organizations. However, the BI solutions do not offer a constant feedback in line with the organizational activities. In this context, there have been developed pervasive BI solutions which are present at different levels of the organization, so that employees can observe only what is most relevant to their day-to-day tasks. They are organized in vertical silos, with clearly identified performance and expectations. The paper emphasizes the role of pervasive BI solutions in reaching the key performance indicators of the modern organizations, more important in the context of crisis.

  15. Solute-solute interactions in intermetallic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Debashis; Murray, Ryan; Collins, Gary S., E-mail: collins@wsu.edu [Washington State University, Department of Physics and Astronomy (United States); Zacate, Matthew O. [Northern Kentucky University, Department of Physics and Geology (United States)

    2017-11-15

    Experiments were carried out on highly ordered GdAl{sub 2} samples containing extremely dilute mole fractions of{sup 111}In/Cd probe-atom solutes (about 10{sup −11}), intrinsic antisite atoms Al{sub Gd} having mole fractions of order 0-10{sup −2}, and doped with Ag solutes at mole fractions of order 10{sup −2}. Three types of defect interactions were investigated. (1) Quadrupole interactions caused by Ag-solute atoms neighboring{sup 111}In/Cd solute probe atoms were detected using the method of perturbed angular correlation of gamma rays (PAC). Three complexes of pairs of In-probes and Ag-solutes occupying neighboring positions on Gd- and Al-sublattices were identified by comparing site fractions in Gd-poor and Gd-rich GdAl{sub 2}(Ag) samples and from the symmetry of the quadrupole interactions. Interaction enthalpies between solute-atom pairs were determined from temperature dependences of observed site fractions. Repulsive interactions were observed for close-neighbor complexes In{sub Gd}+Ag{sub Gd} and In{sub Gd}+Ag{sub Al} pairs, whereas a slightly attractive interaction was observed for In{sub Al}+Ag{sub Al}. Interaction enthalpies were all small, in the range ±0.15 eV. (2) Quadrupole interactions caused by intrinsic antisite atoms Al{sub Gd} neighboring In{sub Gd} probes were also detected and site fractions measured as a function of temperature, as in previous work on samples not doped with Ag-solutes [Temperature- and composition-driven changes in site occupation of solutes in Gd{sub 1+3x}Al{sub 2−3x}, Zacate and Collins (Phys. Rev. B69, 174202 (1))]. However, the effective binding enthalpy between In{sub Gd} probe and Al{sub Gd} antisite was found to change sign from -0.12 eV (attractive interaction) in undoped samples to + 0.24 eV (repulsive) in Ag-doped samples. This may be attributed to an attractive interaction between Al{sub Gd} antisite atoms and Ag-dopants that competes with the attractive interaction between In{sub Gd} and Al{sub Gd

  16. Cromolyn Sodium Nasal Solution

    Science.gov (United States)

    Cromolyn comes as a solution to use with a special nasal applicator. It usually is inhaled three to six times a day to prevent allergy ... first time, read the instructions provided with the solution. Ask your doctor, pharmacist, or respiratory therapist to ...

  17. The procedural egalitarian solution

    NARCIS (Netherlands)

    Dietzenbacher, Bas; Borm, Peter; Hendrickx, Ruud

    2017-01-01

    In this paper we introduce and analyze the procedural egalitarian solution for transferable utility games. This new concept is based on the result of a coalitional bargaining procedure in which egalitarian considerations play a central role. The procedural egalitarian solution is the first

  18. The Procedural Egalitarian Solution

    NARCIS (Netherlands)

    Dietzenbacher, Bas; Borm, Peter; Hendrickx, Ruud

    2016-01-01

    In this paper we introduce and analyze the procedural egalitarian solution for transferable utility games. This new concept is based on the result of a coalitional bargaining procedure in which egalitarian considerations play a central role. The procedural egalitarian solution is the first

  19. Bolting multicenter solutions

    Energy Technology Data Exchange (ETDEWEB)

    Bena, Iosif [Institut de Physique Théorique, Université Paris Saclay, CEA, CNRS, 91191 Gif-sur-Yvette Cedex (France); Bossard, Guillaume [Centre de Physique Théorique, Ecole Polytechnique, CNRS, Université Paris-Saclay, 91128 Palaiseau Cedex (France); Katmadas, Stefanos; Turton, David [Institut de Physique Théorique, Université Paris Saclay, CEA, CNRS, 91191 Gif-sur-Yvette Cedex (France)

    2017-01-30

    We introduce a solvable system of equations that describes non-extremal multicenter solutions to six-dimensional ungauged supergravity coupled to tensor multiplets. The system involves a set of functions on a three-dimensional base metric. We obtain a family of non-extremal axisymmetric solutions that generalize the known multicenter extremal solutions, using a particular base metric that introduces a bolt. We analyze the conditions for regularity, and in doing so we show that this family does not include solutions that contain an extremal black hole and a smooth bolt. We determine the constraints that are necessary to obtain smooth horizonless solutions involving a bolt and an arbitrary number of Gibbons-Hawking centers.

  20. Cosmological solutions in string theory with dilaton self interaction potential

    CERN Document Server

    Mora, C

    2003-01-01

    In this work we present homogeneous and isotropic cosmological solutions for the low energy limit of string theory with a self interacting potential for the scalar field. For a potential that is a linear combination of two exponential, a family of exact solutions are found for the different spatial curvatures. Among this family a non singular accelerating solution for positive curvature is singled out and the violation of the energy conditions for that solution is studied, and also its astrophysical consequences. The string coupling for this solution is finite. (Author)

  1. Professional Hadoop solutions

    CERN Document Server

    Lublinsky, Boris; Yakubovich, Alexey

    2013-01-01

    The go-to guidebook for deploying Big Data solutions with Hadoop Today's enterprise architects need to understand how the Hadoop frameworks and APIs fit together, and how they can be integrated to deliver real-world solutions. This book is a practical, detailed guide to building and implementing those solutions, with code-level instruction in the popular Wrox tradition. It covers storing data with HDFS and Hbase, processing data with MapReduce, and automating data processing with Oozie. Hadoop security, running Hadoop with Amazon Web Services, best practices, and automating Hadoop processes i

  2. Magnetic properties of 1 : 4 complexes of CoCl2 and pyridines carrying carbenes (S(0) = 4/2, 6/2, and 8/2) in diluted frozen solution; influence of carbene multiplicity on heterospin single-molecule magnets.

    Science.gov (United States)

    Karasawa, Satoru; Nakano, Kimihiro; Tanokashira, Jun-ichi; Yamamoto, Noriko; Yoshizaki, Takahito; Koga, Noboru

    2012-11-28

    The microcrystalline sample of a parent complex, [CoCl(2)(py)(4)], showed a single-molecule magnet (SMM) behavior with an effective activation barrier, U(eff)/k(B), of 16 K for reversal of the magnetism in the presence of a dc field of 3 kOe. Pyridine ligands having 2-4 diazo moieties, DYpy; Y = 2, 3l, 3b, and 4, were prepared and confirmed to be quintet, septet, septet, and nonet in the ground state, respectively, after irradiation. The 1 : 4 complexes, CoCl(2)(DYpy)(4); Y = 2, 3l, 3b, and 4 in frozen solutions after irradiation showed the magnetic behaviors of SMMs with total spin multiplicity, S(total) = 17/2, 25/2, 25/2, and 33/2, respectively. Hysteresis loops depending on the temperature were observed and the values of coercive force, H(c), at 1.9 K were 12, 8.4, 11, and 8.1 kOe for CoCl(2)(CYpy)(4); Y = 2, 3l, 3b, and 4, respectively. In dynamic magnetic susceptibility experiments, ac magnetic susceptibility data obeyed the Arrhenius law to give U(eff)/k(B) values of 94, 92, 93, and 87 K for CoCl(2)(CYpy)(4); Y = 2, 3l, 3b, and 4, respectively, while the relaxation times for CoCl(2)(CYpy)(4); Y = 2 and 3l, obtained by dc magnetization decay in the range of 3.5-1.9 K slightly deviated downward from Arrhenius plots on cooling. The dynamic magnetic behaviors for CoCl(2)(CYpy)(4) including [CoCl(2)(py)(4)] and CoCl(2)(C1py)(4) suggested that the generated carbenes interacted with the cobalt ion to increase the relaxation time, τ(q), due to the spin quantum tunneling magnetization, which became larger with increasing S(total) of the complex.

  3. Cosmological solutions in multidimensional model with multiple exponential potential

    International Nuclear Information System (INIS)

    Ivashchuk, Vladimir D.; Melnikov, Vitaly N.; Selivanov, Alexey B.

    2003-01-01

    A family of cosmological solutions with (n+1) Ricci-flat spaces in the theory with several scalar fields and multiple exponential potential is obtained when coupling vectors in exponents obey certain relations. Two subclasses of solutions with power-law and exponential behaviour of scale factors are singled out. It is proved that power-law solutions may take place only when coupling vectors are linearly independent and exponential dependence occurs for linearly dependent set of coupling vectors. A subfamily of solutions with accelerated expansion is singled out. A generalized isotropization behaviours of certain classes of general solutions are found. In quantum case exact solutions to Wheeler-DeWitt equation are obtained and special 'ground state' wave functions are considered. (author)

  4. A Jacobian elliptic single-field inflation

    International Nuclear Information System (INIS)

    Villanueva, J.R.; Gallo, Emanuel

    2015-01-01

    In the scenario of single-field inflation, this field is described in terms of Jacobian elliptic functions. This approach provides, when constrained to particular cases, analytic solutions already known in the past, generalizing them to a bigger family of analytical solutions. The emergent cosmology is analyzed using the Hamilton-Jacobi approach and then the main results are contrasted with the recent measurements obtained from the Planck 2015 data. (orig.)

  5. A Jacobian elliptic single-field inflation

    Energy Technology Data Exchange (ETDEWEB)

    Villanueva, J.R. [Universidad de Valparaiso, Instituto de Fisica y Astronomia, Valparaiso (Chile); Centro de Astrofisica de Valparaiso, Valparaiso (Chile); Gallo, Emanuel [FaMAF, Universidad Nacional de Cordoba, Cordoba (Argentina); Instituto de Fisica Enrique Gaviola (IFEG), CONICET, Cordoba (Argentina)

    2015-06-15

    In the scenario of single-field inflation, this field is described in terms of Jacobian elliptic functions. This approach provides, when constrained to particular cases, analytic solutions already known in the past, generalizing them to a bigger family of analytical solutions. The emergent cosmology is analyzed using the Hamilton-Jacobi approach and then the main results are contrasted with the recent measurements obtained from the Planck 2015 data. (orig.)

  6. Narrated Animated Solution Videos in a Mastery Setting

    Science.gov (United States)

    Schroeder, Noah; Gladding, Gary; Gutmann, Brianne; Stelzer, Timothy

    2015-01-01

    Narrated animated solution videos were implemented in a clinical study that compared a mastery setting that employed repeated cycles of testing with instructional support to a group that had a single opportunity to experience the materials. The mastery setting students attempted sequential questions sets on a topic, with animated solutions between…

  7. Implementation framework for e-solutions for trade facilitation

    NARCIS (Netherlands)

    Stijn, E. van; Phuaphanthong, T.; Keretho, S.; Pikart, M.; Hofman, W.J.; Tan, Y.-H.

    2011-01-01

    To offer practical guidelines for the implementation of e-Solutions for Trade Facilitation (e-ST), such as e-Customs and Single Window, we provide the Implementation Framework for e-Solutions for Trade facilitation (e-STIF). The e-STIF is meant for policy managers, who are responsible for overseeing

  8. OIL SOLUTIONS POWDER

    Science.gov (United States)

    Technical product bulletin: aka OIL SOLUTIONS POWDER, SPILL GREEN LS, this miscellaneous oil spill control agent used in cleanups initially behaves like a synthetic sorbent, then as a solidifier as the molecular microencapsulating process occurs.

  9. Convergent Aeronautics Solutions Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Convergent Aeronautics Solutions (CAS) Project uses short-duration activities to establish early-stage concept and technology feasibility for high-potential...

  10. ERP SOLUTIONS FOR SMEs

    Directory of Open Access Journals (Sweden)

    TUTUNEA MIHAELA FILOFTEIA

    2012-09-01

    Full Text Available The integration of activities, the business processes as well as their optimization, bring the perspective of profitable growth and create significant and competitive advantages in any company. The adoption of some ERP integrated software solutions, from SMEs’ perspective, must be considered as a very important management decision in medium and long term. ERP solutions, along with the transparent and optimized management of all internal processes, also offer an intra and inter companies collaborative platform, which allows a rapid expansion of activities towards e- business and mobile-business environments. This material introduces ERP solutions for SMEs from commercial offer and open source perspective; the results of comparative analysis of the solutions on the specific market, can be an useful aid to the management of the companies, in making the decision to integrate business processes, using ERP as a support.

  11. Solutions to horava gravity.

    Science.gov (United States)

    Lü, H; Mei, Jianwei; Pope, C N

    2009-08-28

    Recently Horava proposed a nonrelativistic renormalizable theory of gravitation, which reduces to Einstein's general relativity at large distances, and that may provide a candidate for a UV completion of Einstein's theory. In this Letter, we derive the full set of equations of motion, and then we obtain spherically symmetric solutions and discuss their properties. We also obtain solutions for the Friedmann-Lemaître-Robertson-Walker cosmological metric.

  12. Piezoelectric Energy Harvesting Solutions

    Science.gov (United States)

    Caliò, Renato; Rongala, Udaya Bhaskar; Camboni, Domenico; Milazzo, Mario; Stefanini, Cesare; de Petris, Gianluca; Oddo, Calogero Maria

    2014-01-01

    This paper reviews the state of the art in piezoelectric energy harvesting. It presents the basics of piezoelectricity and discusses materials choice. The work places emphasis on material operating modes and device configurations, from resonant to non-resonant devices and also to rotational solutions. The reviewed literature is compared based on power density and bandwidth. Lastly, the question of power conversion is addressed by reviewing various circuit solutions. PMID:24618725

  13. Upscaling nonreactive solute transport

    OpenAIRE

    LLERAR MEZA, GERÓNIMO

    2011-01-01

    This thesis focuses on solute transport upscaling. Upscaling of solute transport is usually required to obtain computationally efficient numerical models in many field applications such as, remediation of aquifers, environmental risk to groundwater resources or the design of underground repositories of nuclear waste. The non-Fickian behavior observed in the field, and manifested by peaked concentration profiles with pronounced tailing, has questioned the use of the classical advection-dispers...

  14. ERP SOLUTIONS FOR SMEs

    OpenAIRE

    TUTUNEA MIHAELA FILOFTEIA

    2012-01-01

    The integration of activities, the business processes as well as their optimization, bring the perspective of profitable growth and create significant and competitive advantages in any company. The adoption of some ERP integrated software solutions, from SMEs’ perspective, must be considered as a very important management decision in medium and long term. ERP solutions, along with the transparent and optimized management of all internal processes, also offer an...

  15. Brainmining emotive lateral solutions

    Directory of Open Access Journals (Sweden)

    Theodore Scaltsas

    2016-07-01

    Full Text Available BrainMining is a theory of creative thinking that shows how we should exploit the mind’s spontaneous natural disposition to use old solutions to address new problems – our Anchoring Cognitive Bias. BrainMining develops a simple and straightforward method to transform recalcitrant problems into types of problems which we have solved before, and then apply an old type of solution to them. The transformation makes the thinking lateral by matching up disparate types of problem and solution. It emphasises the role of emotive judgements that the agent makes, when she discerns whether a change of the values or the emotions and feelings in a situation, which would expand the space of solutions available for the problem at hand, would be acceptable or appropriate in the situation. A lateral solution for an intractable problem is thus spontaneously brainmined from the agent’s old solutions, to solve a transformed version of the intractable problem, possibly involving changes in the value system or the emotional profile of the situation, which the agent judges, emotively, will be acceptable, and even appropriate in the circumstances.

  16. Synthesis of solid solutions of perovskites

    Energy Technology Data Exchange (ETDEWEB)

    Dambekalne, M.Y.; Antonova, M.K.; Perro, I.T.; Plaude, A.V.

    1986-03-01

    The authors carry out thermographic studies, using a derivatograph, in order to understand the nature of the processes taking place during the synthesis of solid solutions of perovskites. Based on the detailed studies on the phase transformations occurring in the charges of the PSN-PMN solid solutions and on the selection of the optimum conditions for carrying out their synthesis, the authors obtained a powder containing a minimum quantity of the undesirable pyrochlore phase and by sintering it using the hot pressing method, they produced single phase ceramic specimens containing the perovskite phase alone with a density close to the theoretical value and showing zero apparent porosity and water absorption.

  17. Solution of IVP of Second Order ODE with Oscillatory Solutions ...

    African Journals Online (AJOL)

    Solution of IVP of Second Order ODE with Oscillatory Solutions using Variational Iterative Method (VIM) ... Abstract. A Numerical method for solution of IVP of second order with oscillatory solutions using VIM is developed. The method ... Keywords: Variational Iteration Method, Lagrange multiplier, oscillatory solutions, ODE.

  18. Electrical Conductivity and Chemical Composition of Soil Solution: Comparison of Solution Samplers in Tropical Soils

    Directory of Open Access Journals (Sweden)

    Davi Lopes do Carmo

    2016-01-01

    Full Text Available ABSTRACT Soil solution samplers may have the same working principle, but they differ in relation to chemical and physical characteristics, cost and handling, and these aspects exert influence on the chemical composition of the soil solution obtained. This study was carried out to evaluate, over time, the chemical composition of solutions extracted by Suolo Acqua, with the hydrophilic membrane (HM as a standard, using soils with contrasting characteristics, and to determine the relationship between electrical conductivity (EC and concentration of ions and pH of soil solution samples. This study was carried out under laboratory conditions, using three soils samples with different clay and organic matter (OM contents. Soil solution contents of F−, Cl−, NO−3, Br−, SO42−, Na+, NH4+, K+, Mg2+, Ca2+, were analyzed, as well as inorganic, organic, and total C contents, pH, and EC, in four successive sampling times. Soil solution chemical composition extracted by the Suolo Acqua sampler is similar to that collected by the HM, but the Suolo Acqua extracted more Na+ and soluble organic C than the HM solution. Solution EC, cation and anion concentrations, and soluble C levels are higher in the soil with greater clay and OM contents (Latossolo and Cambissolo in this case. Soil solution composition varied over time, with considerable changes in pH, EC, and nutrient concentrations, especially associated with soil OM. Thus, single and isolated sampling of the soil solution must be avoided, otherwise composition of the soil solution may not be correctly evaluated. Soil solution EC was regulated by pH, as well as the sum of cation and anion concentrations, and the C contents determined in the soil liquid phase.

  19. Passive House Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Strom, I.; Joosten, L.; Boonstra, C. [DHV Sustainability Consultants, Eindhoiven (Netherlands)

    2006-05-15

    PEP stands for 'Promotion of European Passive Houses' and is a consortium of European partners, supported by the European Commission, Directorate General for Energy and Transport. In this working paper an overview is given of Passive House solutions. An inventory has been made of Passive House solutions for new build residences applied in each country. Based on this, the most common basic solutions have been identified and described in further detail, including the extent to which solutions are applied in common and best practice and expected barriers for the implementation in each country. An inventory per country is included in the appendix. The analysis of Passive House solutions in partner countries shows high priority with regard to the performance of the thermal envelope, such as high insulation of walls, roofs, floors and windows/ doors, thermal bridge-free construction and air tightness. Due to the required air tightness, special attention must be paid to indoor air quality through proper ventilation. Finally, efficient ((semi-)solar) heating systems for combined space and DHW heating still require a significant amount of attention in most partner countries. Other basic Passive House solutions show a smaller discrepancy with common practice and fewer barriers have been encountered in partner countries. In the next section, the general barriers in partner countries have been inventoried. For each type of barrier a suggested approach has been given. Most frequently encountered barriers in partner countries are: limited know-how; limited contractor skills; and acceptation of Passive Houses in the market. Based on the suggested approaches to overcoming barriers, this means that a great deal of attention must be paid to providing practical information and solutions to building professionals, providing practical training to installers and contractors and communication about the Passive House concept to the market.

  20. Relative oral bioavailability of morphine and naltrexone derived from crushed morphine sulfate and naltrexone hydrochloride extended-release capsules versus intact product and versus naltrexone solution: a single-dose, randomized-sequence, open-label, three-way crossover trial in healthy volunteers.

    Science.gov (United States)

    Johnson, Franklin K; Stark, Jeffrey G; Bieberdorf, Frederick A; Stauffer, Joe

    2010-06-01

    Morphine sulfate/sequestered naltrexone hydrochloride (HCl) (MS-sNT) extended-release fixed-dose combination capsules, approved by the US Food and Drug Administration (FDA) in August 2009 for chronic moderate to severe pain, contain extended-release morphine pellets with a sequestered core of the opioid antagonist naltrexone. MS-sNT was designed so that if the product is tampered with by crushing, the naltrexone becomes bioavailable to mitigate morphine-induced subjective effects, rendering the product less attractive for tampering. The primary aim of this study was to compare the oral bioavailability of naltrexone and its metabolite 6-beta-naltrexol, derived from crushed pellets from MS-sNT capsules, to naltrexone solution. This study also assessed the relative bioavailability of morphine from crushed pellets from MS-sNT capsules and that from the whole, intact product. This single-dose, randomized-sequence, open-label, 3-period, 3-treatment crossover trial was conducted in healthy volunteers. Adults admitted to the study center underwent a 10-hour overnight fast before study drug administration. Each subject received all 3 of the following treatments, 1 per session, separated by a 14-day washout: tampered pellets (crushed for >or=2 minutes with a mortar and pestle) from a 60-mg MS-sNT capsule (60 mg morphine/2.4 mg naltrexone); 60-mg whole, intact MS-sNT capsule; and oral naltrexone HCl (2.4 mg) solution. Plasma concentrations of naltrexone and 6-beta-naltrexol were measured 0 to 168 hours after administration. Morphine pharmaco-kinetics of crushed and whole pellets were determined 0 to 72 hours after administration. The analysis of relative bioavailability was based on conventional FDA criteria for assuming bioequivalence; that is, 90% CIs for ratios of geometric means (natural logarithm [In]-transformed C(max) and AUC) fell within the range of 80% to 125%. Subjects underwent physical examinations, clinical laboratory tests, and ECG at screening and study

  1. Stationary Cylindrically Symmetric Solution Approaching Einstein's Cosmological Solution

    OpenAIRE

    Iftime, M. D.

    2001-01-01

    Here we describe a stationary cylindrically symmetric solution of Einstein's equation with matter consisting of a positive cosmological and rotating dust term. The solution approaches Einstein static universe solution.

  2. Patterning of Perovskite Single Crystals

    KAUST Repository

    Corzo, Daniel

    2017-06-12

    As the internet-of-things hardware integration continues to develop and the requirements for electronics keep diversifying and expanding, the necessity for specialized properties other than the classical semiconductor performance becomes apparent. The success of emerging semiconductor materials depends on the manufacturability and cost as much as on the properties and performance they offer. Solution-based semiconductors are an emerging concept that offers the advantage of being compatible with large-scale manufacturing techniques and have the potential to yield high-quality electronic devices at a lower cost than currently available solutions. In this work, patterns of high-quality MAPbBr3 perovskite single crystals in specific locations are achieved through the modification of the substrate properties and solvent engineering. The fabrication of the substrates involved modifying the surface adhesion forces through functionalization with self-assembled monolayers and patterning them by photolithography processes. Spin coating and blade coating were used to deposit the perovskite solution on the modified silicon substrates. While single crystal perovskites were obtained with the modification of substrates alone, solvent engineering helped with improving the Marangoni flows in the deposited droplets by increasing the contact angle and lowering the evaporation rate, therefore controlling and improving the shape of the grown perovskite crystals. The methodology is extended to other types of perovskites such as the transparent MAPbCl3 and the lead-free MABi2I9, demonstrating the adaptability of the process. Adapting the process to electrode arrays opened up the path towards the fabrication of optoelectronic devices including photodetectors and field-effect transistors, for which the first iterations are demonstrated. Overall, manufacturing and integration techniques permitting the fabrication of single crystalline devices, such as the method in this thesis work, are

  3. Single bunch beam breakup in linacs and BNS damping

    International Nuclear Information System (INIS)

    Toyomasu, Takanori

    1991-12-01

    We study a single-bunch beam breakup (BBU) problem by a macro-particle model. We consider both the BBU solution and the Landau damping solution which includes the Balakin-Novokhatsky-Smirnov (BNS) damping. In the BBU solution, we get an analytic solution which includes both the Chao-Richter-Yao solution and the two-particle model solution and which agrees well with simulation. The solution can also be used in a multi-bunch case. In the Landau damping solution, we can be see the mechanism of Landau damping formally and can get some insights into BNS damping. We confirm that a two-particle model criterion for BNS damping is a good one. We expect that the two-particle model criterion is represented by the first order interaction in Landau damping solution of a macro-particle model. (author)

  4. Intravenous fluids: balancing solutions.

    Science.gov (United States)

    Hoorn, Ewout J

    2017-08-01

    The topic of intravenous (IV) fluids may be regarded as "reverse nephrology", because nephrologists usually treat to remove fluids rather than to infuse them. However, because nephrology is deeply rooted in fluid, electrolyte, and acid-base balance, IV fluids belong in the realm of our specialty. The field of IV fluid therapy is in motion due to the increasing use of balanced crystalloids, partly fueled by the advent of new solutions. This review aims to capture these recent developments by critically evaluating the current evidence base. It will review both indications and complications of IV fluid therapy, including the characteristics of the currently available solutions. It will also cover the use of IV fluids in specific settings such as kidney transplantation and pediatrics. Finally, this review will address the pathogenesis of saline-induced hyperchloremic acidosis, its potential effect on outcomes, and the question if this should lead to a definitive switch to balanced solutions.

  5. Solute segregation during irradiation

    International Nuclear Information System (INIS)

    Wiedersich, H.; Okamoto, P.R.; Lam, N.Q.

    1977-01-01

    Irradiation at elevated temperature induces redistribution of the elements in alloys on a microstructural level. This phenomenon is caused by differences in the coupling of the various alloy constituents to the radiation-induced defect fluxes. A simple model of the segregation process based on coupled reaction-rate and diffusion equations is discussed. The model gives a good description of the experimentally observed consequences of radiation-induced segregation, including enrichment or depletion of solute elements near defect sinks such as surfaces, voids and dislocations; precipitation of second phases in solid solutions; precipitate redistribution in two-phase alloys; and effects of defect-production rates on void-swelling rates in alloys with minor solute additions

  6. Superstrings fermionic solutions

    International Nuclear Information System (INIS)

    Rausch de Traubenberg, M.

    1990-06-01

    The solutions proposed by the superstring theory are classified and compared. In order to obtain some of the equivalences, the demonstration is based on the coincidence of the excitation spectrum and the quantum numbers from different states. The fermionic representation of the heterotical strings is discussed. The conformal invariance and the supersymmetric results extended to two dimensions are investigated. Concerning the fermionic strings, the formalism and a phenomenological solution involving three families of quarks, chiral leptons and leptons from the E 6 gauge group are presented. The equivalence between real and complex fermions is discussed. The similarity between some of the solutions of the Wess-Zumino-Witten model and the orbifolds is considered. The formal calculation program developed for reproducing the theory's low energy spectra, in the fermionic string formalism is given [fr

  7. Business Intelligence Integrated Solutions

    Directory of Open Access Journals (Sweden)

    Cristescu Marian Pompiliu

    2017-12-01

    Full Text Available A Business Intelligence solution concerns the simple, real-time access to complete information about the business shown in a relevant format of the report, graphic or dashboard type in order help the taking of strategic decisions regarding the direction in which the company goes. Business Intelligence does not produce data, but uses the data produced by the company’s applications. BI solutions extract their data from ERP (Enterprise Resource Planning, CRM (Customer Relationship Management, HCM (Human Capital Management, and Retail, eCommerce or other databases used in the company.

  8. Decontamination solution development studies

    International Nuclear Information System (INIS)

    Allen, R.P.; Fetrow, L.K.; Kjarmo, H.E.; Pool, K.H.

    1993-09-01

    This study was conducted for the Westinghouse Hanford Company (WHC) by Pacific Northwest Laboratory (PNL) as part of the Hanford Grout Technology Program (HGTP). The objective of this study was to identify decontamination solutions capable of removing radioactive contaminants and grout from the Grout Treatment Facility (GTF) process equipment and to determine the impact of these solutions on equipment components and disposal options. The reference grout used in this study was prepared with simulated double-shell slurry feed (DSSF) and a dry blend consisting of 40 wt % limestone flour, 28 wt % blast furnace slag, 28 wt % fly ash, and 4 wt % type I/II Portland cement

  9. Microsoft big data solutions

    CERN Document Server

    Jorgensen, Adam; Welch, John; Clark, Dan; Price, Christopher; Mitchell, Brian

    2014-01-01

    Tap the power of Big Data with Microsoft technologies Big Data is here, and Microsoft's new Big Data platform is a valuable tool to help your company get the very most out of it. This timely book shows you how to use HDInsight along with HortonWorks Data Platform for Windows to store, manage, analyze, and share Big Data throughout the enterprise. Focusing primarily on Microsoft and HortonWorks technologies but also covering open source tools, Microsoft Big Data Solutions explains best practices, covers on-premises and cloud-based solutions, and features valuable case studies. Best of all,

  10. Validation for the determination of biuret in water-soluble, urea-based commercial inorganic fertilizer materials, urea solutions, and sulfur-coated urea products by reversed-phase liquid chromatography: single-laboratory validation of an extension of AOAC official methods 2003.14.

    Science.gov (United States)

    Hojjatie, Michael M; Abrams, Dean

    2014-01-01

    A single-laboratory validation (SLV) study for the LC determination of biuret in dry and liquid urea-based commercial fertilizers was conducted. A total of 23 samples were used: 11 commercial dry urea products, two urea ammonium nitrate products, eight liquid urea-based commercial fertilizers, and four sulfur-coated urea samples from different sources. In addition, one biuret standard from Aldrich and one sample from the Magruder check sample program were used as validation samples. The proposed method is an extension of AOAC Official Method 2003.14 and is based on dissolution of the test portion in the LC mobile phase and determination by HPLC. The system is linear over a concentration range of 1.00-4.50 mg/L biuret, with a correlation coefficient > or = 0.9999. The biuret was well- separated from urea in the commercial urea samples, and from other constituents in the commercial liquid fertilizer with no observed interferences. Recoveries were determined by spiking four of the validation materials with a known amount of biuret standard and measuring the biuret level according to the method. The averaged recovery was 97%. Method precision was determined by quadruplicate analyses of four of the liquid and six of the commercially available dry urea validation materials using three and four replicate analyses. For the liquid fertilizer analyses, the RSD ranged from 7.04 to 13.31%. For the dry urea analyses, the RSDs ranged from 5.68 to 14.34%. Instrument precision was evaluated at the test initiation by using seven injections of five biuret standard solutions. SD varied from 0.27 to 1.02%, with RSDs averaging 1.14%. The LOD was determined to be 0.009% biuret in material, while the LOQ was determined to be 0.031% biuret in material. In addition to the intralaboratory study, interlaboratory studies were performed by two other outside laboratories using this method. Over a concentration range of 0.2 to 0.9% biuret, the average SD was 0.11%, the average RSD was 21

  11. Mid-cervical flame-shaped pseudo-occlusion: diagnostic performance of mid-cervical flame-shaped extracranial internal carotid artery sign on computed tomographic angiography in hyperacute ischemic stroke

    Energy Technology Data Exchange (ETDEWEB)

    Prakkamakul, Supada; Pitakvej, Nantaporn [King Chulalongkorn Memorial Hospital the Thai Red Cross Society, Department of Radiology, Bangkok (Thailand); Dumrongpisutikul, Netsiri; Lerdlum, Sukalaya [King Chulalongkorn Memorial Hospital the Thai Red Cross Society, Department of Radiology, Bangkok (Thailand); Chulalongkorn University, Department of Radiology, Faculty of Medicine, Bangkok (Thailand)

    2017-10-15

    Flame-shaped pseudo-occlusion of the extracranial internal carotid artery (ICA) is a flow-related phenomenon that creates computed tomographic angiography (CTA) and digital subtraction angiography (DSA) findings that mimic tandem intracranial-extracranial ICA occlusion or dissection. We aim to determine the diagnostic performance of mid-cervical flame-shaped extracranial ICA sign on CTA in hyperacute ischemic stroke patients. We retrospectively included consecutive anterior circulation ischemic stroke patients presenting within 6 h of symptom onset who underwent 4D brain CTA and arterial-phase neck CTA using a 320-detector CT scanner during August 2012 to July 2015. Two blinded readers independently reviewed arterial-phase neck CTA and characterized the extracranial ICA configurations into mid-cervical flame-shaped, proximal blunt/beak-shaped, and tubular-shaped groups. 4D whole brain CTA was used as a reference standard for intracranial ICA occlusion detection. Diagnostic performance of the mid-cervical flame-shaped extracranial ICA sign and interobserver reliability were calculated. Of the 81 cases, 11 had isolated intracranial ICA occlusion, and 6 had true extracranial ICA occlusion. Mid-cervical flame-shaped extracranial ICA sign was found in 45.5% (5/11) of isolated intracranial ICA occlusions but none in the true extracranial ICA occlusion group. The sensitivity, specificity, PPV, NPV, and accuracy of the mid-cervical flame-shaped extracranial ICA sign for the detection of isolated intracranial ICA occlusion were 45.5, 100, 100, 92.1, and 92.6%, respectively. Interobserver reliability was 0.90. The mid-cervical flame-shaped extracranial ICA sign may suggest the presence of isolated intracranial ICA occlusion and allow reliable exclusion of tandem extracranial-intracranial ICA occlusion in hyperacute ischemic stroke setting. (orig.)

  12. Prospects of Single Tax Payers

    Directory of Open Access Journals (Sweden)

    Tofan Ivan M.

    2014-03-01

    Full Text Available The article speaks about problem aspects of taxation, which were set by the state for the single tax administering due to permanent and system changes in the tax legislation. It shows the necessity of search for alternative methods of administering in the process of taxation of single tax payers by fiscal services. The goal of the article is the study of prospects of further taxation of entrepreneurs – single tax payers on the basis of analysis of conditions and principles created by the state for the business. The article used methods of system analysis, comparison, forecasting and modelling. It analyses the process of evolution of the simplified taxation system, accounting and reporting from the moment of its adoption until today. The article presents the structure of the quantitative composition of single tax payers depending on the selected groups. It marks out and characterises administrative and fiscal factors that do not facilitate further development of entrepreneurship in Ukraine. In the result of the conducted studies the article outlines problem aspects of organisation of taxation of the small business and offers specific and real ways of their overcoming or partial solution.

  13. Combination of Single Dish and Interferometer Data

    Science.gov (United States)

    Teuben, Peter; Burkutean, Sandra; Stanke, Thomas

    2018-03-01

    I will review techniques how to combine single dish and interferometric data in the radio regime. Packages such as MIRIAD and GILDAS will also be compared to how this is currently done in CASA. An associated tutorial will focus and compare solutions in CASA using the QAC frontend, for which scripts are available in the github repository.

  14. Phenomenology of polymer solution dynamics

    National Research Council Canada - National Science Library

    Phillies, George D. J

    2011-01-01

    ... solutions, not dilute solutions or polymer melts. From centrifugation and solvent dynamics to viscosity and diffusion, experimental measurements and their quantitative representations are the core of the discussion...

  15. A NEET Solution?

    OpenAIRE

    Simmons, Robin; Lambert, Stephen

    2013-01-01

    YOUTH unemployment across the country rose by 20,000 last\\ud month and almost one million 18 to 24-year-olds are classified as\\ud NEET – not in education, employment or training. PROFESSOR\\ud ROBIN SIMMONS and NEWCASTLE COUNCILLOR STEPHEN\\ud LAMBERT argue we need radical solutions to youth unemployment.

  16. Antisocial Personalities, Antidemocractic Solutions.

    Science.gov (United States)

    Schneiderman, Howard G.

    1996-01-01

    Provides critical analysis of David T. Lykken's article "Psychopathy, Sociopathy, and Crime" (1996) and its correlation between unstable families and sociopathy and the use of parental licensing as a solution. Discusses reasons for the appeal of parental licensing as well as the issue of state control replacing social control. (GR)

  17. Investing in solutions

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-03-31

    Mar 31, 2016 ... Improving food security through research is just one of our key activities. the Canadian International Food. Security Research Fund ..... Ministry and the American Chamber of Commerce signed an agreement to implement solutions .... Court with first-ever conviction of two former military members for wartime ...

  18. An Inexpensive Solution Calorimeter

    Science.gov (United States)

    Kavanagh, Emma; Mindel, Sam; Robertson, Giles; Hughes, D. E. Peter

    2008-01-01

    We describe the construction of a simple solution calorimeter, using a miniature bead thermistor as a temperature-sensing element. This has a response time of a few seconds and made it possible to carry out a thermometric reaction in under a minute, which led to minimal heat losses. Small temperature changes of 1 K associated with enthalpies of…

  19. Aliteracy : causes and solutions

    NARCIS (Netherlands)

    Nielen, Thijs Martinus Johannes

    2016-01-01

    The reading motivation of the majority of students declines in the upper half of primary school, which implies a risk for aliteracy: Students can read but, due to lack of practice, their skills remain underdeveloped (Chapter 2). In this thesis we have explored causes and solutions for this important

  20. School Solutions for Cyberbullying

    Science.gov (United States)

    Sutton, Susan

    2009-01-01

    This article offers solutions and steps to prevent cyberbullying. Schools can improve their ability to handle cyberbullying by educating staff members, students, and parents and by implementing rules and procedures for how to handle possible incidents. Among the steps is to include a section about cyberbullying and expectations in the student…

  1. Simple quantification of ultrasonic intensity using aqueous solution of phenolphthalein.

    Science.gov (United States)

    Rong, L; Kojima, Y; Koda, S; Nomura, H

    2001-01-01

    Aqueous phenolphthalein solution under sonication was investigated for use as a chemical dosimeter. The fading time of aqueous phenolphthalein solution under sonication depended on the concentration of phenolphthalein and the pH values of solutions. The fading time was correlated to the ultrasonic intensity in a reaction vessel that is estimated on the basis of decomposition of porphyrin. The relation between the fading time and the ultrasonic intensity for different frequencies is expressed by a single curve. From these results, it is indicated that aqueous solutions of phenolphthalein is useful for simple quantification of ultrasonic intensity for practical use, and one can regard it as one of the ultrasonic intensity indicators.

  2. Stiff fluid spike solutions from Bianchi type V seed solutions

    Science.gov (United States)

    Gregoris, D.; Lim, W. C.; Coley, A. A.

    2017-12-01

    In this paper we expand upon our previous work Coley et al (2016 Class. Quantum Grav. 33 215010) by using the entire family of Bianchi type V stiff fluid solutions as seed solutions of the Stephani transformation. Among the new exact solutions generated, we observe a number of important physical phenomena. The most interesting phenomenon is exact solutions with intersecting spikes. Other interesting phenomena are solutions with saddle states and a close-to-FL epoch.

  3. Single Audit: Single Audit Act Effectiveness Issues

    National Research Council Canada - National Science Library

    Thompson, Sally

    2002-01-01

    As discussed in the report we are releasing today, our work to review agency actions to ensure that recipients take timely and appropriate corrective actions to fix audit findings contained in single...

  4. Single photon from a single trapped atom

    International Nuclear Information System (INIS)

    Dingjan, J.; Jones, M.P.A.; Beugnon, J.; Darquiee, B.; Bergamini, S.; Browaeys, A.; Messin, G.; Grangier, P.

    2005-01-01

    Full text: A quantum treatment of the interaction between atoms and light usually begins with the simplest model system: a two-level atom interacting with a monochromatic light wave. Here we demonstrate an elegant experimental realization of this system using an optically trapped single rubidium atom illuminated by resonant light pulses. We observe Rabi oscillations, and show that this system can be used as a highly efficient triggered source of single photons with a well-defined polarisation. In contrast to other sources based on neutral atoms and trapped ions, no optical cavity is required. We achieved a flux of single photons of about 10 4 s -1 at the detector, and observe complete antibunching. This source has potential applications for distributed atom-atom entanglement using single photons. (author)

  5. Single-Molecule Spectroscopic Investigations of Amphipathic Helix Formation

    Science.gov (United States)

    Cunningham, Joy Ann; Okamoto, Kenji; English, Douglas

    2004-03-01

    We are using single molecule spectroscopy to examine surface-induced conformational states occurring through interaction of a polypeptide with an interface. Specifically, we investigate the folding of amphipathic helices by using single-molecule fluorescence resonance energy transfer to construct peptide conformational distributions in solution and at interfaces. Analysis of the conformational distributions and kinetics of peptides in different environments reveals properties of the free energy surface for helix formation at an interface relative to formation in solution.

  6. Earnest Rutherford, the solution

    CERN Multimedia

    2003-01-01

    If you did not make it to the Science & Society talk by John Campbell last week and are still wondering about the spelling of "Earnest", here is the solution: Two months after the birth of his fourth child on 30 August 1871 in Spring Grove, New Zealand, James Rutherford registered his son, who was recorded as "Earnest" in the Birth Register. Presumably the Registrar wrote the name down as it sounded and the father failed to notice the mistake when signing the Register.

  7. Dynamic flow-driven erosion - An improved approximate solution

    Science.gov (United States)

    Yu, Bofu; Guo, Dawei; Rose, Calvin W.

    2017-09-01

    Rose et al. (2007) published an approximate solution of dynamic sediment concentration for steady and uniform flows, and this approximate solution shows a peak sediment concentration at the early stage of a runoff event, which can be used to describe and explain the first flush effect, a commonly observed phenomenon, especially in the urban environment. However the approximate solution does not converge to the steady state solution that is known exactly. The purpose of the note is to improve the approximate solution of Rose et al. (2007) by maintaining its functional form while forcing its steady state behaviour for sediment concentration to converge to the known steady state solution. The quality of the new approximate solution was assessed by comparing the new approximate solution with an exact solution for the single size class case, and with the numerical solution for the multiple size classes. It was found that 1) the relative error, or discrepancy, decreases as the stream power increases for all three soils considered; 2) the largest discrepancy occurs for the peak sediment concentration, and the average discrepancy in the peak concentration is less than 10% for the three soils considered; 3) for the majority of the 27 slope-flow combinations and for the three soils considered, the new approximate solution modestly underestimates the peak sediment concentration.

  8. Severe service sealing solutions

    International Nuclear Information System (INIS)

    Metcalfe, R.; Wensel, R.

    1994-09-01

    Successful sealing usually requires much more than initial leak-tightness. Friction and wear must also be acceptable, requiring a good understanding of tribology at the sealing interface. This paper describes various sealing solutions for severe service conditions. The CAN2A and CAN8 rotary face seals use tungsten carbide against carbon-graphite to achieve low leakage and long lifetime in nuclear main coolant pumps. The smaller CAN6 seal successfully uses tungsten carbide against silicon carbide in reactor water cleanup pump service. Where friction in CANDU fuelling machine rams must be essentially zero, a hydrostatic seal using two silicon carbide faces is the solution. In the NRU reactor moderator pumps, where pressure is much lower, eccentric seals that prevent boiling at the seal faces are giving excellent service. All these rotary face seals rely on supplementary elastomer seals between their parts. An integrated engineering approach to high performance sealing with O-rings is described. This is epitomized in critical Space Shuttle applications, but is increasingly being applied in CANDU plants. It includes gland design, selection and qualification of material, quality assurance, detection of defects and the effects of lubrication, surface finish, squeeze, stretch and volume constraints. In conclusion, for the severe service applications described, customized solutions have more than paid for themselves by higher reliability, lower maintenance requirements and reduced outage time. (author)

  9. Solute transport across a contact interface in deformable porous media.

    Science.gov (United States)

    Ateshian, Gerard A; Maas, Steve; Weiss, Jeffrey A

    2012-04-05

    A finite element formulation of neutral solute transport across a contact interface between deformable porous media is implemented and validated against analytical solutions. By reducing the integral statements of external virtual work on the two contacting surfaces into a single contact integral, the algorithm automatically enforces continuity of solute molar flux across the contact interface, whereas continuity of the effective solute concentration (a measure of the solute mechano-chemical potential) is achieved using a penalty method. This novel formulation facilitates the analysis of problems in biomechanics where the transport of metabolites across contact interfaces of deformable tissues may be of interest. This contact algorithm is the first to address solute transport across deformable interfaces, and is made available in the public domain, open-source finite element code FEBio (http://www.febio.org). Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Single frequency intracavity SRO

    DEFF Research Database (Denmark)

    Abitan, Haim; Buchhave, Preben

    2000-01-01

    Summary form only given. A single resonance optical parametric oscillator (SRO) is inserted intracavity to a CW high power, single frequency, and ring Nd:YVO4 laser. We obtain a stable single frequency CW SRO with output at 1.7-1.9 μm (idler) and a resonating signal at 2.3-2.6 μm. The behavior...

  11. Intestinal solute carriers

    DEFF Research Database (Denmark)

    Steffansen, Bente; Nielsen, Carsten Uhd; Brodin, Birger

    2004-01-01

    A large amount of absorptive intestinal membrane transporters play an important part in absorption and distribution of several nutrients, drugs and prodrugs. The present paper gives a general overview on intestinal solute carriers as well as on trends and strategies for targeting drugs and...... membrane transporters in the small intestine in order to increase oral bioavailabilities of drug or prodrug, the major influence on in vivo pharmacokinetics is suggested to be dose-dependent increase in bioavailability as well as prolonged blood circulation due to large capacity facilitated absorption...

  12. Shuttle Wastewater Solution Characterization

    Science.gov (United States)

    Adam, Niklas; Pham, Chau

    2011-01-01

    During the 31st shuttle mission to the International Space Station, STS-129, there was a clogging event in the shuttle wastewater tank. A routine wastewater dump was performed during the mission and before the dump was completed, degraded flow was observed. In order to complete the wastewater dump, flow had to be rerouted around the dump filter. As a result, a basic chemical and microbial investigation was performed to understand the shuttle wastewater system and perform mitigation tasks to prevent another blockage. Testing continued on the remaining shuttle flights wastewater and wastewater tank cleaning solutions. The results of the analyses and the effect of the mitigation steps are detailed in this paper.

  13. Intestinal solute carriers

    DEFF Research Database (Denmark)

    Steffansen, Bente; Nielsen, Carsten Uhd; Brodin, Birger

    2004-01-01

    membrane transporters in the small intestine in order to increase oral bioavailabilities of drug or prodrug, the major influence on in vivo pharmacokinetics is suggested to be dose-dependent increase in bioavailability as well as prolonged blood circulation due to large capacity facilitated absorption......A large amount of absorptive intestinal membrane transporters play an important part in absorption and distribution of several nutrients, drugs and prodrugs. The present paper gives a general overview on intestinal solute carriers as well as on trends and strategies for targeting drugs and...

  14. Total Logistic Plant Solutions

    Directory of Open Access Journals (Sweden)

    Dusan Dorcak

    2016-02-01

    Full Text Available The Total Logistics Plant Solutions, plant logistics system - TLPS, based on the philosophy of advanced control processes enables complex coordination of business processes and flows and the management and scheduling of production in the appropriate production plans and planning periods. Main attributes of TLPS is to create a comprehensive, multi-level, enterprise logistics information system, with a certain degree of intelligence, which accepts the latest science and research results in the field of production technology and logistics. Logistic model of company understands as a system of mutually transforming flows of materials, energy, information, finance, which is realized by chain activities and operations

  15. Growth features of ammonium hydrogen d-tartrate single crystals

    Indian Academy of Sciences (India)

    Unknown

    Ammonium hydrogen d-tartrate (d-AHT) single crystals were grown in silica gel. The growth fea- tures of these crystals with variation of parameters like specific gravity of the gel, gel pH, acid concentrations, concentration of the feed solution and gel age were studied in detail. Keywords. d-AHT single crystals; growth features ...

  16. Contribution of the GOCE gradiometer components to regional gravity solutions

    Science.gov (United States)

    Naeimi, Majid; Bouman, Johannes

    2017-05-01

    The contribution of the GOCE gravity gradients to regional gravity field solutions is investigated in this study. We employ radial basis functions to recover the gravity field on regional scales over Amazon and Himalayas as our test regions. In the first step, four individual solutions based on the more accurate gravity gradient components Txx, Tyy, Tzz and Txz are derived. The Tzz component gives better solution than the other single-component solutions despite the less accuracy of Tzz compared to Txx and Tyy. Furthermore, we determine five more solutions based on several selected combinations of the gravity gradient components including a combined solution using the four gradient components. The Tzz and Tyy components are shown to be the main contributors in all combined solutions whereas the Txz adds the least value to the regional gravity solutions. We also investigate the contribution of the regularization term. We show that the contribution of the regularization significantly decreases as more gravity gradients are included. For the solution using all gravity gradients, regularization term contributes to about 5 per cent of the total solution. Finally, we demonstrate that in our test areas, regional gravity modelling based on GOCE data provide more reliable gravity signal in medium wavelengths as compared to pre-GOCE global gravity field models such as the EGM2008.

  17. Watching single protein molecules in action

    DEFF Research Database (Denmark)

    Heiðarsson, Pétur Orri

    (NCS1). The NMR solution structure of NCS1, in combination with fluorescence spectroscopy and mutational analysis, suggested a novel role for the C-terminal tail in regulating conformational stability. On the single-molecule level, the C-domain folded through a partially folded intermediate state....... This knowledge-gap is partly due to our inability to unveil the details of folding mechanisms that can be buried in the ensemble-averaged output of traditional bulk methods. Single-molecule techniques have provided a perspective beyond the ensemble average and enable studying the folding trajectories of protein...... molecules in unprecedented detail. These methods can, in principle, detect rare folding or misfolding events, and ultimately lead to a reconstruction of the free energy landscape. In this thesis, the folding mechanism of both single- and double-domain proteins is unraveled using single-molecule optical...

  18. Global Asymptotic Stability for Discrete Single Species Population Models

    Directory of Open Access Journals (Sweden)

    A. Bilgin

    2017-01-01

    Full Text Available We present some basic discrete models in populations dynamics of single species with several age classes. Starting with the basic Beverton-Holt model that describes the change of single species we discuss its basic properties such as a convergence of all solutions to the equilibrium, oscillation of solutions about the equilibrium solutions, Allee’s effect, and Jillson’s effect. We consider the effect of the constant and periodic immigration and emigration on the global properties of Beverton-Holt model. We also consider the effect of the periodic environment on the global properties of Beverton-Holt model.

  19. The thermodynamics and kinetics of interstitial solid solutions

    International Nuclear Information System (INIS)

    Silva, J.R.G. da.

    1976-04-01

    Studies of hydrogen metal systems where the hidrogen is disolved in a solid solution are presented. Particular items of interest are: the thermodynamics of the hydrogen-iron system; the solubility of hidrogen in super pure iron single crytals; the thermodinamic functions of hydrogen in solid solutions of Nb, Ta and V; and the solubility of hydrogen in α-manganese. The diffusion of carbon and nitrogen in BCC iron is also studied

  20. Glasslike behavior in aqueous electrolyte solutions.

    Science.gov (United States)

    Turton, David A; Hunger, Johannes; Hefter, Glenn; Buchner, Richard; Wynne, Klaas

    2008-04-28

    When salts are added to water, generally the viscosity increases, suggesting that the ions increase the strength of the water's hydrogen-bond network. However, infrared pump-probe measurements on electrolyte solutions have found that ions have no influence on the rotational dynamics of water molecules, implying no enhancement or breakdown of the hydrogen-bond network. Here, we report optical Kerr effect and dielectric relaxation spectroscopic measurements, which have enabled us to separate the effects of rotational and transitional motions of the water molecules. These data show that electrolyte solutions behave like a supercooled liquid approaching a glass transition in which rotational and translational molecular motions are decoupled. It is now possible to understand previously conflicting viscosity data, nuclear magnetic resonance relaxation, and ultrafast infrared spectroscopy in a single unified picture.

  1. Solute-mediated interactions between active droplets

    Science.gov (United States)

    Moerman, Pepijn G.; Moyses, Henrique W.; van der Wee, Ernest B.; Grier, David G.; van Blaaderen, Alfons; Kegel, Willem K.; Groenewold, Jan; Brujic, Jasna

    2017-09-01

    Concentration gradients play a critical role in embryogenesis, bacterial locomotion, as well as the motility of active particles. Particles develop concentration profiles around them by dissolution, adsorption, or the reactivity of surface species. These gradients change the surface energy of the particles, driving both their self-propulsion and governing their interactions. Here, we uncover a regime in which solute gradients mediate interactions between slowly dissolving droplets without causing autophoresis. This decoupling allows us to directly measure the steady-state, repulsive force, which scales with interparticle distance as F ˜1 /r2 . Our results show that the dissolution process is diffusion rather than reaction rate limited, and the theoretical model captures the dependence of the interactions on droplet size and solute concentration, using a single fit parameter, l =16 ±3 nm , which corresponds to the length scale of a swollen micelle. Our results shed light on the out-of-equilibrium behavior of particles with surface reactivity.

  2. Narrated animated solution videos in a mastery setting

    Directory of Open Access Journals (Sweden)

    Noah Schroeder

    2015-02-01

    Full Text Available Narrated animated solution videos were implemented in a clinical study that compared a mastery setting that employed repeated cycles of testing with instructional support to a group that had a single opportunity to experience the materials. The mastery setting students attempted sequential questions sets on a topic, with animated solutions between each set, until mastery was achieved, combining formative assessment with worked examples. Students showed significant improvement from their first to second tries on similar sets of problems, attributable to the feedback and solutions they were given after the first try. These improvements were shown in two topics, superposition and electric potential. The single try group was given one version of the questions and solutions, and while they were not required to watch the solutions to move forward, they chose to. On a post-test including near and far transfer questions, no significant difference was seen between the mastery group and the single try group, but both significantly outperformed a control group that received no instructional support, indicating that students successfully transferred the skills from the solutions to the post-test.

  3. Current Harmonics from Single-Phase Grid-Connected Inverters

    DEFF Research Database (Denmark)

    Yang, Yongheng; Zhou, Keliang; Blaabjerg, Frede

    2016-01-01

    factor, or in the low voltage ride through mode with reactive current injection. In this paper, the mechanism of the harmonic current injection from grid-connected single-phase inverter systems is thus explored, and the analysis is conducted on single-phase PV systems. In particular, the analysis......-phase applications as a promising harmonic mitigation solution. Experiments on single-phase grid-connected systems have verified the correctness of the relevant analysis and also the effectiveness of the tailor-made control solution in terms of good harmonic mitigation....

  4. Single conversion stage amplifier - SICAM

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.

    2005-12-15

    This Ph.D. thesis presents a thorough analysis of the so called SICAM - SIngle Converter stage AMplifier approach to building direct energy conversion audio power amplifiers. The mainstream approach for building isolated audio power amplifiers today consists of isolated DC power supply and Class D amplifier, which essentially represents a two stage solution, where each of the components can be viewed as separate and independent part. The proposed SICAM solution strives for direct energy conversion from the mains to the audio output, by dedicating the operation of the components one to another and integrating their functions, so that the final audio power amplifier represents a single-stage topology with higher efficiency, lower volume, less board space, lower component count and subsequently lower cost. The SICAM approach is both applicable to non-isolated and isolated audio power amplifiers, but the problems encountered in these two cases are different. Non-isolated SICAM solutions are intended for both AC mains-connected and battery-powered devices. In non-isolated mains-connected SICAMs the main idea is to simplify the power supply or even provide integrated power factor correction (PFC) functions, while still maintaining low component stress and good audio performance by generally decreasing the input voltage level to the Class D audio power amplifier. On the other hand, non-isolated battery-powered SICAMs have to cope with the ever changing battery voltage and provide output voltage levels which are both lower and higher than the battery voltage, while still being simple and single-stage energy conversion solutions. In isolated SICAMs the isolation transformer adjusts the voltage level on the secondary side to the desired level, so the main challenges here are decreasing the size of the magnetic core and reducing the number and size of bulky reactive components as much as possible. The main focus of this thesis is directed towards the isolated SICAMs and

  5. 2010 Water & Aqueous Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Dor Ben-Amotz

    2010-08-13

    Water covers more than two thirds of the surface of the Earth and about the same fraction of water forms the total mass of a human body. Since the early days of our civilization water has also been in the focus of technological developments, starting from converting it to wine to more modern achievements. The meeting will focus on recent advances in experimental, theoretical, and computational understanding of the behavior of the most important and fascinating liquid in a variety of situations and applications. The emphasis will be less on water properties per se than on water as a medium in which fundamental dynamic and reactive processes take place. In the following sessions, speakers will discuss the latest breakthroughs in unraveling these processes at the molecular level: Water in Solutions; Water in Motion I and II; Water in Biology I and II; Water in the Environment I and II; Water in Confined Geometries and Water in Discussion (keynote lecture and poster winners presentations).

  6. Internet Business Solutions

    Science.gov (United States)

    1997-01-01

    Cogent Software, Inc. was formed in January 1995 by David Atkinson and Irene Woerner, both former employees of the Jet Propulsion Laboratory (JPL). Several other Cogent employees also worked at JPL. Atkinson headed JPL's Information Systems Technology section and Woerner lead the Advanced User Interfaces Group. Cogent's mission is to help companies organize and manage their online content by developing advanced software for the next generation of online directories and information catalogs. The company offers a complete range of Internet solutions, including Internet access, Web site design, local and wide-area networks, and custom software for online commerce applications. Cogent also offers DesignSphere Online, an electronic community for the communications arts industry. Customers range from small offices to manufacturers with thousands of employees, including Chemi-Con, one of the largest manufacturers of capacitors in the world.

  7. Solution of Finite Element Equations

    DEFF Research Database (Denmark)

    Krenk, Steen

    An important step in solving any problem by the finite element method is the solution of the global equations. Numerical solution of linear equations is a subject covered in most courses in numerical analysis. However, the equations encountered in most finite element applications have some special...... features that justify the development of specialized solution algorithms....

  8. Continuum mechanics of single-substance bodies

    CERN Document Server

    Eringen, A Cemal

    1975-01-01

    Continuum Physics, Volume II: Continuum Mechanics of Single-Substance Bodies discusses the continuum mechanics of bodies constituted by a single substance, providing a thorough and precise presentation of exact theories that have evolved during the past years. This book consists of three parts-basic principles, constitutive equations for simple materials, and methods of solution. Part I of this publication is devoted to a discussion of basic principles irrespective of material geometry and constitution that are valid for all kinds of substances, including composites. The geometrical notions, k

  9. Location Intelligence Solutions

    International Nuclear Information System (INIS)

    Schmidt, D.

    2015-01-01

    Location Intelligence (LI) means using the spatial dimension of information as a key to support business processes. This spatial dimension has to be defined by geographic coordinates. Storing these spatial objects in a database allows for attaching a 'meaning' to them, like 'current position', 'border', 'building' or 'room'. Now the coordinates represent real-world objects, which can be relevant for the measurement, documentation, control or optimization of (parameters of) business processes aiming at different business objectives. But LI can only be applied, if the locations can be determined with an accuracy (in space and time) appropriate for the business process in consideration. Therefore the first step in any development of a LI solution is the analysis of the business process itself regarding its requirements for spatial and time resolution and accuracy. The next step is the detailed analysis of the surrounding conditions of the process: Does the process happen indoor and/or outdoor? Are there moving objects? If yes, how fast are they? How does the relevant environment look like? Is technical infrastructure available? Is the process restricted by regulations? As a result, a proper Location Detection Technology (LDT) has to be chosen in order to get reliable and accurate positions of the relevant objects. At the highly challenging conditions of the business processes IAEA inspectors are working with, the chosen LDTs have to deliver reliable positioning on ''room-level'' accuracy, even if there is no location enabling infrastructure in place, the objects (people) mostly are indoors and have to work under strong regulations. The presentation will give insights into innovative LI solutions based on technologies of different LDT providers. Pros and cons of combinations of different LDT (like multi- GNSS, IMU, camera, and human interaction based positioning) will be discussed from the

  10. Natural climate solutions

    Science.gov (United States)

    Griscom, Bronson W.; Adams, Justin; Ellis, Peter W.; Houghton, Richard A.; Lomax, Guy; Miteva, Daniela A.; Schlesinger, William H.; Shoch, David; Siikamäki, Juha V.; Smith, Pete; Woodbury, Peter; Zganjar, Chris; Blackman, Allen; Campari, João; Conant, Richard T.; Delgado, Christopher; Elias, Patricia; Gopalakrishna, Trisha; Hamsik, Marisa R.; Herrero, Mario; Kiesecker, Joseph; Landis, Emily; Laestadius, Lars; Leavitt, Sara M.; Minnemeyer, Susan; Polasky, Stephen; Potapov, Peter; Putz, Francis E.; Sanderman, Jonathan; Silvius, Marcel; Wollenberg, Eva; Fargione, Joseph

    2017-10-01

    Better stewardship of land is needed to achieve the Paris Climate Agreement goal of holding warming to below 2 °C; however, confusion persists about the specific set of land stewardship options available and their mitigation potential. To address this, we identify and quantify “natural climate solutions” (NCS): 20 conservation, restoration, and improved land management actions that increase carbon storage and/or avoid greenhouse gas emissions across global forests, wetlands, grasslands, and agricultural lands. We find that the maximum potential of NCS—when constrained by food security, fiber security, and biodiversity conservation—is 23.8 petagrams of CO2 equivalent (PgCO2e) y‑1 (95% CI 20.3–37.4). This is ≥30% higher than prior estimates, which did not include the full range of options and safeguards considered here. About half of this maximum (11.3 PgCO2e y‑1) represents cost-effective climate mitigation, assuming the social cost of CO2 pollution is ≥100 USD MgCO2e‑1 by 2030. Natural climate solutions can provide 37% of cost-effective CO2 mitigation needed through 2030 for a >66% chance of holding warming to below 2 °C. One-third of this cost-effective NCS mitigation can be delivered at or below 10 USD MgCO2‑1. Most NCS actions—if effectively implemented—also offer water filtration, flood buffering, soil health, biodiversity habitat, and enhanced climate resilience. Work remains to better constrain uncertainty of NCS mitigation estimates. Nevertheless, existing knowledge reported here provides a robust basis for immediate global action to improve ecosystem stewardship as a major solution to climate change.

  11. Single ventricle cardiac defect

    International Nuclear Information System (INIS)

    Eren, B.; Turkmen, N.; Fedakar, R.; Cetin, V.

    2010-01-01

    Single ventricle heart is defined as a rare cardiac abnormality with a single ventricle chamber involving diverse functional and physiological defects. Our case is of a ten month-old baby boy who died shortly after admission to the hospital due to vomiting and diarrhoea. Autopsy findings revealed cyanosis of finger nails and ears. Internal examination revealed; large heart, weighing 60 grams, single ventricle, without a septum and upper membranous part. Single ventricle is a rare pathology, hence, this paper aims to discuss this case from a medico-legal point of view. (author)

  12. Coherent single-photon absorption by single emitters coupled to one-dimensional nanophotonic waveguides

    DEFF Research Database (Denmark)

    Chen, Yuntian; Wubs, Martijn; Mørk, Jesper

    2011-01-01

    solutions for the dynamics of absorption, with maximum atomic excitation . We furthermore propose a terminated waveguide to aid the single-photon absorption. We found that for an emitter placed at an optimal distance from the termination, the maximum atomic excitation due to an incident single......We study the dynamics of single-photon absorption by a single emitter coupled to a one-dimensional waveguide that simultaneously provides channels for spontaneous emission (SE) decay and a channel for the input photon. We have developed a time-dependent theory that allows us to specify any input......-photon wavepacket can exceed 70%. This high value is a direct consequence of the high SE β-factor for emission into the waveguide. Finally, we have also explored whether waveguide dispersion could aid single-photon absorption by pulse shaping. For a Gaussian input wavepacket, we found that the absorption efficiency...

  13. Exercises in experimental physics including complete solutions

    International Nuclear Information System (INIS)

    Fleischmann, R.; Loos, G.

    1978-01-01

    This collection of exercises is not only addressed to students of physics but also to scientists of other branches and to engineers. Possibilities are offered to the student to gain control on his growing knowledge from the beginning of his studies until the examination. The individual exercises are linked thematically and are mostly composed by several single tasks. Complete and detailed numerical solutions are presented. The topics covered are: (1) Mechanics, (2) thermodynamics, (3) oscillations and their propagation, (4) electricity and magnetism, (5) atomic physics, and (6) nuclear physics. (KBE)

  14. Enthalpy of solution of biuret in various aqueous electrolyte solutions and in an urea solution

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Hisashi; Murakami, Sachio (Osaka City Univ. (Japan))

    1989-06-30

    Enthalpies of biuret which is simplest amido acid and does not have hydrophobic group, in various aqueous solutions and in urea solution were measured at 298.15K to clarify the influence of salt on polymer conformal changes of organism or structure and functions of membrane. The isoperibol calorimeter where the quartz thermometer was used as the thermal sensor, was used in the measurement. The performance of this calorimeter was tested by comparing measurements with values in references. From the analysis of enthalpies of biuret solutions, following results of solute-solute-solvent interactions could be obtained: the rate where biuret destroys water structure is smaller in salt solutions than in aqueous solutions and the tendency depends on the ion size; ion-water interaction weakens owing to the ion-biuret interaction in salt solution of biuret; and water molecules are made free. 25 refs., 4 figs., 5 tabs.

  15. Ion separation from dilute electrolyte solutions by nanofiltration

    International Nuclear Information System (INIS)

    Garcia, Corazon M.

    2000-03-01

    Nanofiltration (NF) is a pressure-driven process which is considered potential for the separation of ionic species selectively from solutions containing mixture of electrolyte solutes. The lower operating pressure requirement of NF than reverse osmosis (RO) makes the earlier potentially economical. In the separation of ions, many authors believed that there are membranes with characteristic fixed surface charge and that the mechanism of separation of ions is by the differences in valences of the ions. In this study, experiments involving dilute single-solute and multiple-solute electrolyte solutions were performed using three different NF membranes. Permeate fluxes and ion rejections of the different species of ions in samples of permeate solutions were measured at varied conditions. The mechanism of separation in NF was determined based on the analysis of the trends and behavior of ion rejection relative to the solution temperature, pressure, type of solute, feed concentration and feed solution pH. The results of the experiments show that there is no evidence of the presence of fixed surface charge on the NF membranes. Ion separation was made possible by the combination of sieve effect and ion-hydration effect. Ions having higher hydration numbers showed higher ion rejection than those having lower hydration numbers. A method to determine the effective membrane pore size of NF membranes using hydrodynamic model was proposed. The proposed method is based on the assumptions that the membrane is neutral and that the separation is based on sieving effect. (Author)

  16. Single payer: good metaphor, bad politics.

    Science.gov (United States)

    Stone, Deborah

    2009-08-01

    Health insurance reform requires political solutions, not technocratic fixes. Single payer frames the problem as a grossly inefficient bursar's office. Great political leadership means reframing the problem as a faulty social compact, rewriting the compact, and making everybody play by the new rules. Most of all, great leadership means explaining in powerful language why participating in the new social compact would fulfill both enlightened self-interest and social responsibility.

  17. Single-Molecule Spectroscopy

    Indian Academy of Sciences (India)

    IAS Admin

    GENERAL ARTICLE. Single-Molecule Spectroscopy. Every Molecule is Different! Kankan Bhattacharyya. Keywords. Single-molecule spectroscopy. (SMS), confocal microscopy,. FCS, sm-FRET, FLIM. 1 High-resolution spectrum re- fers to a spectrum consisting of very sharp lines. The sharp lines clearly display transitions to ...

  18. Single-Molecule Spectroscopy

    Indian Academy of Sciences (India)

    IAS Admin

    RESONANCE. February 2015. GENERAL ARTICLE. Single-Molecule Spectroscopy. Every Molecule is Different! Kankan Bhattacharyya. Keywords. Single-molecule ..... Resonance Energy. Transfer (FRET) is an elegant technique to measure the distance between a donor and an acceptor molecule. FRET refers to the.

  19. Single photon and nonlocality

    Indian Academy of Sciences (India)

    critical analysis of the concept of hidden variable used by the authors of [1] shows that the reasoning is not correct. Keywords. Nonlocality; single particle; hidden variables. PACS Nos 03.67.Ba; 03.65.Ta; 32.80.Lg; 07.79.Fc. 1. Introduction. Quantum nonlocality [2] for single particle is a subject of debate since the origin.

  20. Single gaze gestures

    DEFF Research Database (Denmark)

    Møllenbach, Emilie; Lilholm, Martin; Gail, Alastair

    2010-01-01

    This paper examines gaze gestures and their applicability as a generic selection method for gaze-only controlled interfaces. The method explored here is the Single Gaze Gesture (SGG), i.e. gestures consisting of a single point-to-point eye movement. Horizontal and vertical, long and short SGGs were...

  1. Understanding Single Adulthood.

    Science.gov (United States)

    Stein, Peter J.

    The life styles and life chances of the unmarried include elements of choices. Singles may be grouped and characterized according to whether their status may be considered stable or temporary. A life cycle, or continuum model of singlehood is reviewed, including its different factors, or phases. A new model for singles is proposed--a life spiral…

  2. Single-sided NMR

    CERN Document Server

    Casanova, Federico; Blümich, Bernhard

    2011-01-01

    Single-Sided NMR describes the design of the first functioning single-sided tomograph, the related measurement methods, and a number of applications. One of the key advantages to this method is the speed at which the images are obtained.

  3. Single molecules and nanotechnology

    CERN Document Server

    Vogel, Horst

    2007-01-01

    This book focuses on recent advances in the rapidly evolving field of single molecule research. These advances are of importance for the investigation of biopolymers and cellular biochemical reactions, and are essential to the development of quantitative biology. Written by leading experts in the field, the articles cover a broad range of topics, including: quantum photonics of organic dyes and inorganic nanoparticles their use in detecting properties of single molecules the monitoring of single molecule (enzymatic) reactions single protein (un)folding in nanometer-sized confined volumes the dynamics of molecular interactions in biological cells The book is written for advanced students and scientists who wish to survey the concepts, techniques and results of single molecule research and assess them for their own scientific activities.

  4. Single Nanoparticle Plasmonic Sensors

    Directory of Open Access Journals (Sweden)

    Manish Sriram

    2015-10-01

    Full Text Available The adoption of plasmonic nanomaterials in optical sensors, coupled with the advances in detection techniques, has opened the way for biosensing with single plasmonic particles. Single nanoparticle sensors offer the potential to analyse biochemical interactions at a single-molecule level, thereby allowing us to capture even more information than ensemble measurements. We introduce the concepts behind single nanoparticle sensing and how the localised surface plasmon resonances of these nanoparticles are dependent upon their materials, shape and size. Then we outline the different synthetic approaches, like citrate reduction, seed-mediated and seedless growth, that enable the synthesis of gold and silver nanospheres, nanorods, nanostars, nanoprisms and other nanostructures with tunable sizes. Further, we go into the aspects related to purification and functionalisation of nanoparticles, prior to the fabrication of sensing surfaces. Finally, the recent developments in single nanoparticle detection, spectroscopy and sensing applications are discussed.

  5. Single-photon imaging

    CERN Document Server

    Seitz, Peter

    2011-01-01

    The acquisition and interpretation of images is a central capability in almost all scientific and technological domains. In particular, the acquisition of electromagnetic radiation, in the form of visible light, UV, infrared, X-ray, etc. is of enormous practical importance. The ultimate sensitivity in electronic imaging is the detection of individual photons. With this book, the first comprehensive review of all aspects of single-photon electronic imaging has been created. Topics include theoretical basics, semiconductor fabrication, single-photon detection principles, imager design and applications of different spectral domains. Today, the solid-state fabrication capabilities for several types of image sensors has advanced to a point, where uncoooled single-photon electronic imaging will soon become a consumer product. This book is giving a specialist´s view from different domains to the forthcoming “single-photon imaging” revolution. The various aspects of single-photon imaging are treated by internati...

  6. Single-Phase PLLs

    DEFF Research Database (Denmark)

    Golestan, Saeed; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez

    2017-01-01

    Single-phase phase-locked loops (PLLs) are popular for the synchronization and control of single-phase gridconnected converters. They are also widely used for monitoring and diagnostic purposes in the power and energy areas. In recent years, a large number of single-phase PLLs with different...... structures and properties have been proposed in the literature. The main aim of this paper is to provide a review of these PLLs. To this end, the single-phase PLLs are first classified into two major categories: 1) power-based PLLs (pPLLs), and 2) quadrature signal generation-based PLLs (QSG......-PLLs). The members of each category are then described and their pros and cons are discussed. This work provides a deep insight into characteristics of different single-phase PLLs and, therefore, can be considered as a reference for researchers and engineers....

  7. Solution microcalorimeter for measuring heats of solution of radioactive elements and compounds

    International Nuclear Information System (INIS)

    Raschella, D.L.

    1978-12-01

    The microcalorimeter vessel is constructed of tantalum metal, with a nominal volume of 5 cm 3 . Its energy equivalent is 24 J K -1 when containing 5 cm 3 H 2 O. The thermal leakage modulus is 0.010 min -1 . A thermistor is employed as the temperature sensor. The operating sensitivity is about 1 x 10 -5 K (300 μJ). The performance of the calorimetry system was tested using tris(hydroxymethyl)aminomethane (TRIS) and magnesium metal. The results of the TRIS experiments, at a concentration of 1 g dm -3 in 0.1 N HCl at 298 K, yielded a heat of solution of -29.606 +- 0.063 kJ mol -1 . The magnesium experiments, in 1 N HCl at 298 K, gave a heat of solution of -465.965 +- 1.136 kJ mol -1 . The heat of solution of curium-248 metal in 1 N HCl at 298 K was measured. The experiments, which should not be considered definitive, yielded a heat of solution of -606.4 +- 1.8 kJ mol -1 . A single measurement in 6 N HCl gave a heat of solution of -602.3 kJ mol -1 . From these results the heat of formation of Cm 3+ /sub (aq)/ is calculated to be -607.2 +- 2.5 kJ mol -1

  8. Optical solutions for unbundled access network

    Science.gov (United States)

    Bacîş Vasile, Irina Bristena

    2015-02-01

    The unbundling technique requires finding solutions to guarantee the economic and technical performances imposed by the nature of the services that can be offered. One of the possible solutions is the optic one; choosing this solution is justified for the following reasons: it optimizes the use of the access network, which is the most expensive part of a network (about 50% of the total investment in telecommunications networks) while also being the least used (telephone traffic on the lines has a low cost); it increases the distance between the master station/central and the terminal of the subscriber; the development of the services offered to the subscribers is conditioned by the subscriber network. For broadband services there is a need for support for the introduction of high-speed transport. A proper identification of the factors that must be satisfied and a comprehensive financial evaluation of all resources involved, both the resources that are in the process of being bought as well as extensions are the main conditions that would lead to a correct choice. As there is no single optimal technology for all development scenarios, which can take into account all access systems, a successful implementation is always done by individual/particularized scenarios. The method used today for the selection of an optimal solution is based on statistics and analysis of the various, already implemented, solutions, and on the experience that was already gained; the main evaluation criterion and the most unbiased one is the ratio between the cost of the investment and the quality of service, while serving an as large as possible number of customers.

  9. Insight solutions are correct more often than analytic solutions

    Science.gov (United States)

    Salvi, Carola; Bricolo, Emanuela; Kounios, John; Bowden, Edward; Beeman, Mark

    2016-01-01

    How accurate are insights compared to analytical solutions? In four experiments, we investigated how participants’ solving strategies influenced their solution accuracies across different types of problems, including one that was linguistic, one that was visual and two that were mixed visual-linguistic. In each experiment, participants’ self-judged insight solutions were, on average, more accurate than their analytic ones. We hypothesised that insight solutions have superior accuracy because they emerge into consciousness in an all-or-nothing fashion when the unconscious solving process is complete, whereas analytic solutions can be guesses based on conscious, prematurely terminated, processing. This hypothesis is supported by the finding that participants’ analytic solutions included relatively more incorrect responses (i.e., errors of commission) than timeouts (i.e., errors of omission) compared to their insight responses. PMID:27667960

  10. Single pit propagation on austenitic stainless steel

    International Nuclear Information System (INIS)

    Heurtault, Stephane

    2016-01-01

    The electrochemical characterization of metastable events such as pitting corrosion of stainless steel in chloride electrolyte remains complex because many individual processes may occur simultaneously on the alloy surface. To overcome these difficulties, an experimental setup, the flow micro-device, has been developed to achieve the initiation of a single pit and to propagate the single pit in three dimensions. In this work, we take advantage of such a device in order to revisit the pitting process on a 316L stainless steel in a chloride - sulphate bulk. In a first step, the time evolution of the pit geometry (depth, radius) and the chemical evolution of the pit solution investigated using in situ Raman spectroscopy have shown that the pit depth propagation depends on the formation of a metal chloride and sulphate gel in the pit solution, and is controlled by the metallic cations diffusion from the pit bottom to the pit mouth. The pit radius growth is defined by the initial surface de-passivation, by the presence of a pit cover and by the gel development in the solution. all of these phenomena are function of applied potential and chemical composition of the solution. In a last step, it was demonstrated that a critical chloride concentration is needed in order to maintain the pit propagation. This critical concentration slightly increases with the pit depth. From statistical analysis performed on identical experiments, a zone diagram showing the pit stability as a function of the chloride concentration and the pit dimensions was built. (author) [fr

  11. Simple de Sitter solutions

    International Nuclear Information System (INIS)

    Silverstein, Eva

    2008-01-01

    We present a framework for de Sitter model building in type IIA string theory, illustrated with specific examples. We find metastable de Sitter (dS) minima of the potential for moduli obtained from a compactification on a product of two nil three-manifolds (which have negative scalar curvature) combined with orientifolds, branes, fractional Chern-Simons forms, and fluxes. As a discrete quantum number is taken large, the curvature, field strengths, inverse volume, and four-dimensional string coupling become parametrically small, and the de Sitter Hubble scale can be tuned parametrically smaller than the scales of the moduli, Kaluza Klein (KK), and winding mode masses. A subtle point in the construction is that although the curvature remains consistently weak, the circle fibers of the nilmanifolds become very small in this limit (though this is avoided in illustrative solutions at modest values of the parameters). In the simplest version of the construction, the heaviest moduli masses are parametrically of the same order as the lightest KK and winding masses. However, we provide a method for separating these marginally overlapping scales, and more generally the underlying supersymmetry of the model protects against large corrections to the low-energy moduli potential

  12. Plutonium solution analyzer

    International Nuclear Information System (INIS)

    Burns, D.A.

    1994-09-01

    A fully automated analyzer has been developed for plutonium solutions. It was assembled from several commercially available modules, is based upon segmented flow analysis, and exhibits precision about an order of magnitude better than commercial units (0.5%-O.05% RSD). The system was designed to accept unmeasured, untreated liquid samples in the concentration range 40-240 g/L and produce a report with sample identification, sample concentrations, and an abundance of statistics. Optional hydraulics can accommodate samples in the concentration range 0.4-4.0 g/L. Operating at a typical rate of 30 to 40 samples per hour, it consumes only 0.074 mL of each sample and standard, and generates waste at the rate of about 1.5 mL per minute. No radioactive material passes through its multichannel peristaltic pump (which remains outside the glovebox, uncontaminated) but rather is handled by a 6-port, 2-position chromatography-type loop valve. An accompanying computer is programmed in QuickBASIC 4.5 to provide both instrument control and data reduction. The program is truly user-friendly and communication between operator and instrument is via computer screen displays and keyboard. Two important issues which have been addressed are waste minimization and operator safety (the analyzer can run in the absence of an operator, once its autosampler has been loaded)

  13. Future climate. Engineering solutions

    Energy Technology Data Exchange (ETDEWEB)

    Ferdinand, J.F.; Hagedorn-Rasmussen, P.; Fonnesbech, B.

    2009-09-15

    Future Climate Engineering Solutions - Joint Report is the common output and a documentation of more than 1 year's effort by 13 engineering associations - in 12 countries - to demonstrate how technologies can combat climate change. The report consists of three parts: Summaries of 10 national climate plans and technology prospects, 5 Key Common Findings, and a Climate Call from Engineers to create a new global climate treaty. The basic assumption of the project is recognition that GHG emissions, and their concentration in the atmosphere, must be reduced to a sustainable level. The project definition of a sustainable level is equivalent to the best-case stabilisation scenario which was presented in the 4th Assessment Report (AR4) by the UN Intergovernmental Panel on Climate Change (IPCC), whereby the global mean temperature is most likely to stabilise at 2.0-2.4 deg. C. The Future Climate website www.futureclimate.info holds more information about the project, including possibility to download project material, including the full national climate plans.

  14. Plutonium solution analyzer

    Energy Technology Data Exchange (ETDEWEB)

    Burns, D.A.

    1994-09-01

    A fully automated analyzer has been developed for plutonium solutions. It was assembled from several commercially available modules, is based upon segmented flow analysis, and exhibits precision about an order of magnitude better than commercial units (0.5%-O.05% RSD). The system was designed to accept unmeasured, untreated liquid samples in the concentration range 40-240 g/L and produce a report with sample identification, sample concentrations, and an abundance of statistics. Optional hydraulics can accommodate samples in the concentration range 0.4-4.0 g/L. Operating at a typical rate of 30 to 40 samples per hour, it consumes only 0.074 mL of each sample and standard, and generates waste at the rate of about 1.5 mL per minute. No radioactive material passes through its multichannel peristaltic pump (which remains outside the glovebox, uncontaminated) but rather is handled by a 6-port, 2-position chromatography-type loop valve. An accompanying computer is programmed in QuickBASIC 4.5 to provide both instrument control and data reduction. The program is truly user-friendly and communication between operator and instrument is via computer screen displays and keyboard. Two important issues which have been addressed are waste minimization and operator safety (the analyzer can run in the absence of an operator, once its autosampler has been loaded).

  15. Laplace transform solutions for solute transport in fissured aquifers

    Science.gov (United States)

    Barker, J. A.

    The main processes affecting the migration of a solute in a fissured aquifer will be advection and dispersion in the fissures, diffusion into the porous matrix; and adsorption. This paper considers solute transport in an idealized fissured aquifer consisting of slabs of saturated rock-matrix separated by equally spaced, planar fissures. The solution of the transport equations is developed as far as Laplace transforms of the solute concentrations in the fissure and matrix water. Numerical inversion of the transforms is used to investigate characteristic behaviour of the model for a number of special cases.

  16. Single Policy Study

    DEFF Research Database (Denmark)

    Kronsell, Annica; Manners, Ian James

    2015-01-01

    Single policy studies are the most common form of European Union (EU) research. Single policy studies are widely used to understand the role of the EU in a wide variety of sectors, together with their development over time, and often offer public policy prescriptions. This chapter discusses the r...... Policy (CSDP). The examples are illustrative of how single policy studies can be designed to use different approaches in the analysis: multiple streams approach to policy-making; a comparative hypothesis testing; and feminist institutional theory.......Single policy studies are the most common form of European Union (EU) research. Single policy studies are widely used to understand the role of the EU in a wide variety of sectors, together with their development over time, and often offer public policy prescriptions. This chapter discusses...... the relevance of single policy studies in EU research and give examples of how such research can be designed and carried out. The chapter reviews three examples of single policy studies using different methods based on EU environmental policy, the EU biofuels directive, and the EU Common Security and Defence...

  17. Single neuron computation

    CERN Document Server

    McKenna, Thomas M; Zornetzer, Steven F

    1992-01-01

    This book contains twenty-two original contributions that provide a comprehensive overview of computational approaches to understanding a single neuron structure. The focus on cellular-level processes is twofold. From a computational neuroscience perspective, a thorough understanding of the information processing performed by single neurons leads to an understanding of circuit- and systems-level activity. From the standpoint of artificial neural networks (ANNs), a single real neuron is as complex an operational unit as an entire ANN, and formalizing the complex computations performed by real n

  18. Single photon ECT

    International Nuclear Information System (INIS)

    Maeda, Toshio; Matsuda, Hiroshi; Tada, Akira; Bunko, Hisashi; Koizumi, Kiyoshi

    1982-01-01

    The detectability of lesions located deep in a body or overlapped with a physiologically increased activity improve with the help of single photon ECT. In some cases, the ECT is superior to the conventional gamma camera images and X-ray CT scans in the evaluation of the location and size of lesion. The single photon ECT of the brain compares favorably with the contrast enhansed X-ray CT scans. The most important adaptation of the single photon ECT are the detection of recurrent brain tumors after craniotomy and the evaluation of ischemic heart diseases. (author)

  19. Single Electron Tunneling

    International Nuclear Information System (INIS)

    Ruggiero, Steven T.

    2005-01-01

    Financial support for this project has led to advances in the science of single-electron phenomena. Our group reported the first observation of the so-called ''Coulomb Staircase'', which was produced by tunneling into ultra-small metal particles. This work showed well-defined tunneling voltage steps of width e/C and height e/RC, demonstrating tunneling quantized on the single-electron level. This work was published in a now well-cited Physical Review Letter. Single-electron physics is now a major sub-field of condensed-matter physics, and fundamental work in the area continues to be conducted by tunneling in ultra-small metal particles. In addition, there are now single-electron transistors that add a controlling gate to modulate the charge on ultra-small photolithographically defined capacitive elements. Single-electron transistors are now at the heart of at least one experimental quantum-computer element, and single-electron transistor pumps may soon be used to define fundamental quantities such as the farad (capacitance) and the ampere (current). Novel computer technology based on single-electron quantum dots is also being developed. In related work, our group played the leading role in the explanation of experimental results observed during the initial phases of tunneling experiments with the high-temperature superconductors. When so-called ''multiple-gap'' tunneling was reported, the phenomenon was correctly identified by our group as single-electron tunneling in small grains in the material. The main focus throughout this project has been to explore single electron phenomena both in traditional tunneling formats of the type metal/insulator/particles/insulator/metal and using scanning tunneling microscopy to probe few-particle systems. This has been done under varying conditions of temperature, applied magnetic field, and with different materials systems. These have included metals, semi-metals, and superconductors. Amongst a number of results, we have

  20. Properties of scintillator solutes

    International Nuclear Information System (INIS)

    Fluornoy, J.M.

    1998-06-01

    This special report summarizes measurements of the spectroscopic and other properties of the solutes that were used in the preparation of several new liquid scintillators developed at EG and G/Energy Measurements/Santa Barbara Operations (the precursor to Bechtel Nevada/Special Technologies Laboratory) on the radiation-to-light converter program. The data on the individual compounds are presented in a form similar to that used by Prof. Isadore Berlman in his classic handbook of fluorescence spectra. The temporal properties and relative efficiencies of the new scintillators are presented in Table 1, and the efficiencies as a function of wavelength are presented graphically in Figure 1. In addition, there is a descriptive glossary of the abbreviations used herein. Figure 2 illustrates the basic structures of some of the compounds and of the four solvents reported in this summary. The emission spectra generally exhibit more structure than the absorption spectra, with the result that the peak emission wavelength for a given compound may lie several nm away from the wavelength, λ avg , at the geometric center of the emission spectrum. Therefore, the author has chosen to list absorption peaks, λ max , and emission λ avg values in Figures 3--30, as being most illustrative of the differences between the compounds. The compounds, BHTP, BTPB, ADBT, and DPTPB were all developed on this program. P-terphenyl, PBD, and TPB are commercially available blue emitters. C-480 and the other longer-wavelength emitters are laser dyes available commercially from Exciton Corporation. 1 ref., 30 figs

  1. Method for single crystal growth of photovoltaic perovskite material and devices

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Jinsong; Dong, Qingfeng

    2017-11-07

    Systems and methods for perovskite single crystal growth include using a low temperature solution process that employs a temperature gradient in a perovskite solution in a container, also including at least one small perovskite single crystal, and a substrate in the solution upon which substrate a perovskite crystal nucleates and grows, in part due to the temperature gradient in the solution and in part due to a temperature gradient in the substrate. For example, a top portion of the substrate external to the solution may be cooled.

  2. Drowning in PC Management: Could a Linux Solution Save Us?

    Science.gov (United States)

    Peters, Kathleen A.

    2004-01-01

    Short on funding and IT staff, a Western Canada library struggled to provide adequate public computing resources. Staff turned to a Linux-based solution that supports up to 10 users from a single computer, and blends Web browsing and productivity applications with session management, Internet filtering, and user authentication. In this article,…

  3. Removal of heavy metals from aqueous solution by using mango ...

    African Journals Online (AJOL)

    Biosorbent and unfertilizable flowering buds of mango plant, a local agrowaste in Multan, Pakistan known as battoor is used in this study. Efficacy of the biosorbent is tested in batch for Pb2+, Cu2+, Zn2+ and Ni2+ in single metal solution under control experimental conditions. The concentration of the biomass was 0.5 g.

  4. Iodometric determination of copper and iron in one solution

    NARCIS (Netherlands)

    Agterdenbos, J.; Tellingen, E.J. v.

    CopperII and ironIII may be titrated iodometrically in a single solution. Copper is titrated first, iron being masked with fluoride. After the end-point is reached, aluminium chloride is added to de-mask the iron, which is titrated after some minutes. Good results are obtained.

  5. Removal of heavy metals from aqueous solution by using mango ...

    African Journals Online (AJOL)

    user

    2011-03-14

    Mar 14, 2011 ... biomass indicates that they are effective in removing metal ions from single metal solutions as well as other co-ions with ... been devised for the treatment and removal of heavy metals. The commonly used procedures for removing metal ions from aqueous streams include phyto- ...... Removal of uranium (vi).

  6. Protein diffusion in polyelectrolyte solutions

    Science.gov (United States)

    Khandai, Santripti; Jena, Sidhartha S.

    2012-06-01

    The diffusion of green fluorescent protein (GFP) in non-dilute polyelectrolyte solutions of Poly-L-lysine was studied using fluorescence recovery after photobleaching (FRAP) technique. The effect of background charges on probe diffusion of GFP was studied with varying ionic strength of the solution. With increase in polyelectrolyte concentration, increase in solution viscosity and decrease in probe diffusion coefficient was observed. At the same time, we observed the diffusion coefficient increased with increase in salt concentration, while solution viscosity decreased, indicating a competition between electrostatic force between background and probe and viscosity drag. When the probe diffusion coefficient was compared with the predicted Stokes-Einstein (S-E) relation, strong positive deviations were observed for all the solutions with highest deviation observed for solution with zero salt concentration.

  7. Single-particle Schroedinger fluid. I. Formulation

    International Nuclear Information System (INIS)

    Kan, K.K.; Griffin, J.J.

    1976-01-01

    The problem of a single quantal particle moving in a time-dependent external potential well is formulated specifically to emphasize and develop the fluid dynamical aspects of the matter flow. This idealized problem, the single-particle Schroedinger fluid, is shown to exhibit already a remarkably rich variety of fluid dynamical features, including compressible flow and line vortices. It provides also a sufficient framework to encompass simultaneously various simplified fluidic models for nuclei which have earlier been postulated on an ad hoc basis, and to illuminate their underlying restrictions. Explicit solutions of the single-particle Schroedinger fluid problem are studied in the adiabatic limit for their mathematical and physical implications (especially regarding the collective kinetic energy). The basic generalizations for extension of the treatment to the many-body Schroedinger fluid are set forth

  8. Colligative properties of simple solutions.

    Science.gov (United States)

    Andrews, F C

    1976-11-05

    Vapor pressure lowering, osmotic pressure, boiling point elevation, and freezing point depression are all related quantitatively to the decrease in micro(1)(soln) upon the addition of solute in forming a solution. In any equilibrium system, regardless of whether it is in a gravitational field or whether it contains walls, semipermeable membranes, phase transitions, or solutes, all equilibria are maintained locally, in the small region of the equilibrium, by the equality of micro(1)(soln). If there are several subsystems in a gravitational field, at any fixed height, microi will have the same value in each subsystem into which substance i can get, and microi + M(i)gh is constant throughout the entire system. In a solution, there is no mechanism by which solvent and solute molecules could sustain different pressures. Both the solvent and solute are always under identical pressures in a region of solution, namely, the pressure of the solution in that region. Since nature does not know which component we call the solvent and which the solute, equations should be symmetric in the two (acknowledging that the nonvolatile component, if any, is commonly chosen to be solute). Simple molecular pictures illustrate what is happening to cause pressure (positive or negative) in liquids, vapor pressure of liquids, and the various colligative properties of solutions. The only effect of solute involved in these properties is that it dilutes the solvent, with the resulting increase in S and decrease in micro(1)(soln). Water can be driven passively up a tree to enormous heights by the difference between its chemical potential in the roots and the ambient air. There is nothing mysterious about the molecular bases for any of these phenomena. Biologists can use the well-understood pictures of these phenomena with confidence to study what is happening in the complicated living systems they consider.

  9. Stresses of Single Parenting

    Science.gov (United States)

    ... Text Size Email Print Share Stresses of Single Parenting Page Content Article Body What are some ways ... way. Check your local library for books on parenting. Local hospitals, the YMCA, and church groups often ...

  10. A Single Atom Antenna

    International Nuclear Information System (INIS)

    Trinter, Florian; Williams, Joshua B; Weller, Miriam; Waitz, Markus; Pitzer, Martin; Voigtsberger, Jörg; Schober, Carl; Kastirke, Gregor; Müller, Christian; Goihl, Christoph; Burzynski, Phillip; Wiegandt, Florian; Wallauer, Robert; Kalinin, Anton; Schmidt, Lothar Ph H; Schöffler, Markus S; Jahnke, Till; Dörner, Reinhard; Chiang, Ying-Chih; Gokhberg, Kirill

    2015-01-01

    Here we demonstrate the smallest possible implementation of an antenna-receiver complex which consists of a single (helium) atom acting as the antenna and a second (neon) atom acting as a receiver. (paper)

  11. Single Beam Holography.

    Science.gov (United States)

    Chen, Hsuan; Ruterbusch, Paul H.

    1979-01-01

    Discusses how holography can be used as part of undergraduate physics laboratories. The authors propose a single beam technique of holography, which will reduce the recording scheme as well as relax the isolation requirements. (HM)

  12. Single-Molecule Plasmon Sensing: Current Status and Future Prospects.

    Science.gov (United States)

    Taylor, Adam B; Zijlstra, Peter

    2017-08-25

    Single-molecule detection has long relied on fluorescent labeling with high quantum-yield fluorophores. Plasmon-enhanced detection circumvents the need for labeling by allowing direct optical detection of weakly emitting and completely nonfluorescent species. This review focuses on recent advances in single molecule detection using plasmonic metal nanostructures as a sensing platform, particularly using a single particle-single molecule approach. In the past decade two mechanisms for plasmon-enhanced single-molecule detection have been demonstrated: (1) by plasmonically enhancing the emission of weakly fluorescent biomolecules, or (2) by monitoring shifts of the plasmon resonance induced by single-molecule interactions. We begin with a motivation regarding the importance of single molecule detection, and advantages plasmonic detection offers. We describe both detection mechanisms and discuss challenges and potential solutions. We finalize by highlighting the exciting possibilities in analytical chemistry and medical diagnostics.

  13. Enhanced safeguards via solution monitoring

    International Nuclear Information System (INIS)

    Burr, T.; Wangen, L.

    1996-09-01

    Solution monitoring is defined as the essentially continuous monitoring of solution level, density, and temperature in all tanks in the process that contain, or could contain, safeguards-significant quantities of nuclear material. This report describes some of the enhancements that solution monitoring could make to international safeguards. The focus is on the quantifiable benefits of solution monitoring, but qualitatively, solution monitoring can be viewed as a form of surveillance. Quantitatively, solution monitoring can in some cases improve diversion detection probability. For example, the authors show that under certain assumptions, solution monitoring can be used to reduce the standard deviation of the annual material balance, σ MB , from approximately 17 kg to approximately 4 kg. Such reduction in σ MB will not always be possible, as they discuss. However, in all cases, solution monitoring would provide assurance that the measurement error models are adequate so that one has confidence in his estimate of σ MB . Some of the results in this report were generated using data that were simulated with prototype solution monitoring software that they are developing. An accompanying document describes that software

  14. The double-dust solution

    CERN Document Server

    Krämer, Dietrich

    2002-01-01

    An exact solution describing the static gravitational field produced by the superposition of two dust beams of equal mass density but opposite propagation direction is given in a closed form. In particular, the cylindrically symmetric situation is considered in which the two dust components move on trajectories screwing around the axis. In this case, the solution can be matched to the Levi-Civita external vacuum solution at any value of the radial coordinate. The axis is regular and the mass density is positive everywhere in the interior region of the global solution. The dominant energy condition is satisfied.

  15. Structure and dynamics of solutions

    CERN Document Server

    Ohtaki, H

    2013-01-01

    Recent advances in the study of structural and dynamic properties of solutions have provided a molecular picture of solute-solvent interactions. Although the study of thermodynamic as well as electronic properties of solutions have played a role in the development of research on the rate and mechanism of chemical reactions, such macroscopic and microscopic properties are insufficient for a deeper understanding of fast chemical and biological reactions. In order to fill the gap between the two extremes, it is necessary to know how molecules are arranged in solution and how they change their pos

  16. Viscosity Control of Protein Solution by Small Solutes: A Review.

    Science.gov (United States)

    Hong, Taehun; Iwashita, Kazuki; Shiraki, Kentaro

    2017-12-12

    Viscosity of protein solution is one of the most troublesome issues for the high-concentration formulation of protein drugs. In this review, we summarize the practical methods that suppress the viscosity of protein solution using small molecular additives. The small amount of salts decreases the viscosity that results from electrostatic repulsion and attraction. The chaotrope suppresses the hydrophobic attraction and cluster formation, which can lower the solution viscosity. Arginine hydrochloride (ArgHCl) also suppresses the solution viscosity due to the hydrophobic and aromatic interactions between protein molecules. The small molecular additives are the simplest resolution of the high viscosity of protein solution as well as understanding of the primary cause in complex phenomena of protein interactions. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  17. A minimax inequality for a class of functionals and applications to the existence of solutions for two-point boundary-value problems

    Directory of Open Access Journals (Sweden)

    Ghasem Alizadeh Afrouzi

    2006-10-01

    Full Text Available In this paper, we establish an equivalent statement to minimax inequality for a special class of functionals. As an application, we prove the existence of three solutions to the Dirichlet problem $$displaylines{ -u''(x+m(xu(x =lambda f(x,u(x,quad xin (a,b,cr u(a=u(b=0, }$$ where $lambda>0$, $f:[a,b]imes mathbb{R}o mathbb{R}$ is a continuous function which changes sign on $[a,b]imes mathbb{R}$ and $m(xin C([a,b]$ is a positive function.

  18. Aerosol hygroscopic growth parameterization based on a solute specific coefficient

    Science.gov (United States)

    Metzger, S.; Steil, B.; Xu, L.; Penner, J. E.; Lelieveld, J.

    2011-09-01

    Water is a main component of atmospheric aerosols and its amount depends on the particle chemical composition. We introduce a new parameterization for the aerosol hygroscopic growth factor (HGF), based on an empirical relation between water activity (aw) and solute molality (μs) through a single solute specific coefficient νi. Three main advantages are: (1) wide applicability, (2) simplicity and (3) analytical nature. (1) Our approach considers the Kelvin effect and covers ideal solutions at large relative humidity (RH), including CCN activation, as well as concentrated solutions with high ionic strength at low RH such as the relative humidity of deliquescence (RHD). (2) A single νi coefficient suffices to parameterize the HGF for a wide range of particle sizes, from nanometer nucleation mode to micrometer coarse mode particles. (3) In contrast to previous methods, our analytical aw parameterization depends not only on a linear correction factor for the solute molality, instead νi also appears in the exponent in form x · ax. According to our findings, νi can be assumed constant for the entire aw range (0-1). Thus, the νi based method is computationally efficient. In this work we focus on single solute solutions, where νi is pre-determined with the bisection method from our analytical equations using RHD measurements and the saturation molality μssat. The computed aerosol HGF and supersaturation (Köhler-theory) compare well with the results of the thermodynamic reference model E-AIM for the key compounds NaCl and (NH4)2SO4 relevant for CCN modeling and calibration studies. The equations introduced here provide the basis of our revised gas-liquid-solid partitioning model, i.e. version 4 of the EQuilibrium Simplified Aerosol Model (EQSAM4), described in a companion paper.

  19. Single-Dose Lignocaine-Based Blood Cardioplegia in Single Valve Replacement Patients

    Directory of Open Access Journals (Sweden)

    Jaydip Ramani

    Full Text Available Abstract OBJECTIVE: Myocardial protection is the most important in cardiac surgery. We compared our modified single-dose long-acting lignocaine-based blood cardioplegia with short-acting St Thomas 1 blood cardioplegia in patients undergoing single valve replacement. METHODS: A total of 110 patients who underwent single (aortic or mitral valve replacement surgery were enrolled. Patients were divided in two groups based on the cardioplegia solution used. In group 1 (56 patients, long-acting lignocaine based-blood cardioplegia solution was administered as a single dose while in group 2 (54 patients, standard St Thomas IB (short-acting blood-based cardioplegia solution was administered and repeated every 20 minutes. All the patients were compared for preoperative baseline parameters, intraoperative and all the postoperative parameters. RESULTS: We did not find any statistically significant difference in preoperative baseline parameters. Cardiopulmonary bypass time were 73.8±16.5 and 76.4±16.9 minutes (P=0.43 and cross clamp time were 58.9±10.3 and 66.3±11.2 minutes (P=0.23 in group 1 and group 2, respectively. Mean of maximum inotrope score was 6.3±2.52 and 6.1±2.13 (P=0.65 in group 1 and group 2, respectively. We also did not find any statistically significant difference in creatine-phosphokinase-MB (CPK-MB, Troponin-I levels, lactate level and cardiac functions postoperatively. CONCLUSION: This study proves the safety and efficacy of long-acting lignocaine-based single-dose blood cardioplegia compared to the standard short-acting multi-dose blood cardioplegia in patients requiring the single valve replacement. Further studies need to be undertaken to establish this non-inferiority in situations of complex cardiac procedures especially in compromised patients.

  20. Calibration of 232U solution

    International Nuclear Information System (INIS)

    Galan Valera, M. P.; Acena Berrenechea, M. L.

    1988-01-01

    A method for as certain the activity by alpha spectroscopy with semiconductor detectors, of a solution of 232U is presented. It consists of the comparison with a 233U solution activity previously measured in a gridded ionization chamber of 2π geometry. The total measurement uncertainty is about + - 0,02. (Author) 9 refs

  1. Calibration of uranium 232 solution

    International Nuclear Information System (INIS)

    Galan, M.P.; Acena, M.L.

    1988-01-01

    A method for acertainning the activity by alpha spectroscopy with semiconductor detectors, of a solution of Uranium-232 is presented. It consists of the comparison with a Uranium-233 solution activity previously measured in a gridded ionization chamber of 2 π geometry. The total measurement uncertainty is about +- 0,02. (Author)

  2. A charged spherically symmetric solution

    Indian Academy of Sciences (India)

    A charged spherically symmetric solution. K MOODLEY, S D MAHARAJ and K S GOVINDER. School of Mathematical and Statistical Sciences, University of Natal, Durban 4041, South Africa. Email: maharaj@nu.ac.za. MS received 8 April 2002; revised 7 April 2003; accepted 23 June 2003. Abstract. We find a solution of the ...

  3. Requirements Engineering: Solutions and Trends

    NARCIS (Netherlands)

    Ebert, C.; Wieringa, Roelf J.; Aurum, A.; Wohlin, C.

    2005-01-01

    This last chapter of the book describes solutions and trends in the discipline of RE. Starting from a wrap-up of what was presented throughout this book, it suggests a framework of requirements engineering and indicates what current solutions are available in this framework. Beyond providing a short

  4. Enclosing Solutions of Integral Equations

    DEFF Research Database (Denmark)

    Madsen, Kaj; NA NA NA Caprani, Ole; Stauning, Ole

    1996-01-01

    We present a method for enclosing the solution of an integral equation. It is assumed that a solution exists and that the corresponding integral operator T is a contraction near y. When solving the integral equation by iteration we obtain a result which is normally different from y because...

  5. Thermotransport in interstitial solid solutions

    International Nuclear Information System (INIS)

    Fogel'son, R.L.

    1982-01-01

    On the basis of literature data the problem of thermotransport of impurities (H, N, O, C) in interstitial solid solutions is considered. It is shown that from experimental data on the thermotransport an important parameter of dissolved atoms can be found which characterizes atom state in these solutions-enthalpy of transport

  6. Solutions of equations in languages

    NARCIS (Netherlands)

    Hesselink, Wim H.

    A context-free grammar corresponds to a system of equations in languages. The language generated by the grammar is the smallest solution of the system. We give a necessary and sufficient condition for an arbitrary solution to be the smallest one. We revive an old criterion to decide that a grammar

  7. Exploring manufacturing solutions for SMEs

    DEFF Research Database (Denmark)

    Radziwon, Agnieszka; Blichfeldt, Henrik; Bilberg, Arne

    This exploratory study provides an overview over current state of manufacturing solutions in small and medium sized enterprises (SMEs) in region of Southern Denmark. Building on manufacturing paradigms, this paper reveals relevant aspects for the development and implementation of improving SMEs...... of manufacturing solutions, which are required to increase their competitiveness and assure sustainable growth....

  8. Automation of the Solution of Kakuro Puzzles

    Science.gov (United States)

    Davies, R. P.; Roach, P. A.; Perkins, S.

    Kakuro puzzles, also called cross sum puzzles, are grids containing clues to the completion of numerical 'words'. Being structured in a similar way to crossword puzzles, Kakuro grids contain overlapping continuous runs that are exclusively either horizontal or vertical. The 'clues' take the form of specified run totals, and a puzzle is solved by placing a value in each cell such that every run sums to its specified total, and no run contains duplicate values. While most puzzles have only a single solution, longer runs may be satisfied using many arrangements of values, leading to the puzzle having a deceptively large search space. The associated, popular Sudoku puzzle has been linked with important real-world applications including timetabling and conflict free wavelength routing, and more recently, coding theory due to its potential usefulness in the construction of erasure correction codes. It is possible that Kakuro puzzles will have similar applications, particularly in the construction of codes, where run totals may form a generalised type of parity check. A project has begun to investigate the properties of the class of Kakuro puzzles, and thereby establish its potential usefulness to real-world applications including coding theory. This paper reports some early findings from that project, specifically concerning puzzle complexity and the appropriateness of heuristic approaches for its automated solution. It highlights the use of heuristics to guide search by a backtracking solver, in preference to local search optimisation, and reports on the effectiveness of two heuristics and a pruning technique for reducing solution time. The authors believe this to be the first published work in the use of heuristics, in combination with pruning, for the automated solution of Kakuro puzzles.

  9. Aerosol water parameterization: a single parameter framework

    Science.gov (United States)

    Metzger, S.; Steil, B.; Abdelkader, M.; Klingmüller, K.; Xu, L.; Penner, J. E.; Fountoukis, C.; Nenes, A.; Lelieveld, J.

    2015-11-01

    We introduce a framework to efficiently parameterize the aerosol water uptake for mixtures of semi-volatile and non-volatile compounds, based on the coefficient, νi. This solute specific coefficient was introduced in Metzger et al. (2012) to accurately parameterize the single solution hygroscopic growth, considering the Kelvin effect - accounting for the water uptake of concentrated nanometer sized particles up to dilute solutions, i.e., from the compounds relative humidity of deliquescence (RHD) up to supersaturation (Köhler-theory). Here we extend the νi-parameterization from single to mixed solutions. We evaluate our framework at various levels of complexity, by considering the full gas-liquid-solid partitioning for a comprehensive comparison with reference calculations using the E-AIM, EQUISOLV II, ISORROPIA II models as well as textbook examples. We apply our parameterization in EQSAM4clim, the EQuilibrium Simplified Aerosol Model V4 for climate simulations, implemented in a box model and in the global chemistry-climate model EMAC. Our results show: (i) that the νi-approach enables to analytically solve the entire gas-liquid-solid partitioning and the mixed solution water uptake with sufficient accuracy, (ii) that, e.g., pure ammonium nitrate and mixed ammonium nitrate - ammonium sulfate mixtures can be solved with a simple method, and (iii) that the aerosol optical depth (AOD) simulations are in close agreement with remote sensing observations for the year 2005. Long-term evaluation of the EMAC results based on EQSAM4clim and ISORROPIA II will be presented separately.

  10. Single-Mode VCSELs

    Science.gov (United States)

    Larsson, Anders; Gustavsson, Johan S.

    The only active transverse mode in a truly single-mode VCSEL is the fundamental mode with a near Gaussian field distribution. A single-mode VCSEL produces a light beam of higher spectral purity, higher degree of coherence and lower divergence than a multimode VCSEL and the beam can be more precisely shaped and focused to a smaller spot. Such beam properties are required in many applications. In this chapter, after discussing applications of single-mode VCSELs, we introduce the basics of fields and modes in VCSELs and review designs implemented for single-mode emission from VCSELs in different materials and at different wavelengths. This includes VCSELs that are inherently single-mode as well as inherently multimode VCSELs where higher-order modes are suppressed by mode selective gain or loss. In each case we present the current state-of-the-art and discuss pros and cons. At the end, a specific example with experimental results is provided and, as a summary, the most promising designs based on current technologies are identified.

  11. Particular solution of the discrete-ordinate method.

    Science.gov (United States)

    Qin, Yi; Box, Michael A; Jupp, David L

    2004-06-20

    We present two methods that can be used to derive the particular solution of the discrete-ordinate method (DOM) for an arbitrary source in a plane-parallel atmosphere, which allows us to solve the transfer equation 12-18% faster in the case of a single beam source and is even faster for the atmosphere thermal emission source. We also remove the divide by zero problem that occurs when a beam source coincides with a Gaussian quadrature point. In our implementation, solution for multiple sources can be obtained simultaneously. For each extra source, it costs only 1.3-3.6% CPU time required for a full solution. The GDOM code that we developed previously has been revised to integrate with the DOM. Therefore we are now able to compute the Green's function and DOM solutions simultaneously.

  12. Removal of Manganese from Solution using Polyamide Membrane

    Science.gov (United States)

    Mathaba, M.; Sithole, N.; Mashifana, T.

    2018-03-01

    The work demonstrates the performance of polyamide membrane in the removal of manganese ions from single salt aqueous solution simulating real acid mine drainage. The membrane was tested using a dead-end filtration cell with manganese sulphate was used to prepare a feed solution. The membrane flux and metal rejection was evaluated. Effect of operating parameters such as pH, initial feed concentration and pressure on membrane performance was investigated. The pressure was varied between 10 and 15 bar and it was observed that increasing the pressure increases the membrane flux. Acidic pH conditions contributed to the removal of the contaminate as Mn2+ ions are freely at low pH. The percentage rejection was found to be 63.5 to 77.6 % as concentration is increased from 290 ppm to 321 ppm for a feed solution. The membrane showed satisfactory results in removing metal ions from solution.

  13. Light Induced Aggregation of Specific Single Walled Carbon Nanotubes

    OpenAIRE

    Gopannagari, Madhusudana; Chaturvedi, Harsh

    2015-01-01

    We report optically induced aggregation and consequent separation of specific diameter of pristine single walled carbon nanotubes (SWNT) from stable solution. Well dispersed solution of pristine SWNTs, without any surfactant or functionalization, show rapid aggregation by uniform exposure to UV, visible and NIR illumination. Optically induced aggregation linearly increases with consequent increase in the intensity of light. Aggregated SWNTs were separated from the dispersed supernatant and ch...

  14. Composite S-brane solutions related to Toda-type systems

    International Nuclear Information System (INIS)

    Ivashchuk, V D

    2003-01-01

    Composite S-brane solutions in multidimensional gravity with scalar fields and fields of forms related to Toda-like systems are presented. These solutions are defined on a product manifold R * x M 1 x - - - x M n , where R * is a time manifold, M 1 is an Einstein manifold and M i (i>1) are Ricci-flat manifolds. Certain examples of S-brane solutions related to A 1 + - - - + A 1 , A m Toda chains and those with 'block-orthogonal' intersections (e.g. SM-brane solutions) are singled out. A Kasner-like asymptotical behaviour of the solutions is shown when certain restrictions are imposed

  15. Numerical solution of the stochastic parabolic equation with the dependent operator coefficient

    Energy Technology Data Exchange (ETDEWEB)

    Ashyralyev, Allaberen [Department of Elementary Mathematics Education, Fatih University, 34500, Istanbul (Turkey); Department of Mathematics, ITTU, Ashgabat (Turkmenistan); Okur, Ulker [Institute for Stochastics and Applications, Department of Mathematics, University of Stuttgart, 70569, Stuttgart (Germany)

    2015-09-18

    In the present paper, a single step implicit difference scheme for the numerical solution of the stochastic parabolic equation with the dependent operator coefficient is presented. Theorem on convergence estimates for the solution of this difference scheme is established. In applications, this abstract result permits us to obtain the convergence estimates for the solution of difference schemes for the numerical solution of initial boundary value problems for parabolic equations. The theoretical statements for the solution of this difference scheme are supported by the results of numerical experiments.

  16. Single-Photon Optomechanics

    Science.gov (United States)

    Nunnenkamp, A.; Børkje, K.; Girvin, S. M.

    2011-08-01

    Optomechanics experiments are rapidly approaching the regime where the radiation pressure of a single photon displaces the mechanical oscillator by more than its zero-point uncertainty. We show that in this limit the power spectrum has multiple sidebands and that the cavity response has several resonances in the resolved-sideband limit. Using master-equation simulations, we also study the crossover from the weak-coupling many-photon to the single-photon strong-coupling regime. Finally, we find non-Gaussian steady states of the mechanical oscillator when multiphoton transitions are resonant. Our study provides the tools to detect and take advantage of this novel regime of optomechanics.

  17. Single well techniques

    International Nuclear Information System (INIS)

    Drost, W.

    1983-01-01

    The single well technique method includes measurement of parameters of groundwater flow in saturated rock. For determination of filtration velocity the dilution of radioactive tracer is measured, for direction logging the collimeter is rotated in the probe linked with the compass. The limiting factor for measurement of high filtration velocities is the occurrence of turbulent flow. The single well technique is used in civil engineering projects, water works and subsurface drainage of liquid waste from disposal sites. The radioactive tracer method for logging the vertical fluid movement in bore-holes is broadly used in groundwater survey and exploitation. (author)

  18. Biocatalytic Single Enzyme Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Grate, Jay W.; Kim, Jungbae

    2004-03-31

    As an innovative way of enzyme stabilization, we recently developed a new enzyme composite of nano-meter scale that we call "single-enzyme nanoparticles (SENs)" (9). Each enzyme molecule is surrounded with a porous composite organic/inorganic network of less than a few nanometers think. This approach represents a new type of enzyme-containing nanostructure. In experiments with perotease (chymotrypsin, CT), the activity of single enzyme nanoparticle form of the enzyme was greatly stabilized compared to the free form, without imposing a serious mass transfer limitation of substrates. In this chapter we will describe the synthesis, characterization and catalytic activity of the new SENs.

  19. Single port laparoscopic surgery

    DEFF Research Database (Denmark)

    Springborg, Henrik; Istre, Olav

    2012-01-01

    potential benefits. Theoretically, cosmetic outcomes, postoperative pain and complication rates could be improved with use of single site surgery. This study describes introduction of the method in a private hospital in Denmark, in which 40 patients have been treated for benign gynecologic conditions......LESS, or laparo-endoscopic single site surgery, is a promising new method in minimally invasive surgery. An increasing number of surgical procedures are being performed using this technique, however, its large-scale adoption awaits results of prospective randomized controlled studies confirming...

  20. Solutions for the food processing industry; Shokuhin seizogyo solution

    Energy Technology Data Exchange (ETDEWEB)

    Toda, T.; Iwami, N. [Fuji Electric Co. Ltd., Tokyo (Japan)

    1999-09-10

    To improve quality control and maintain stable operation, the food processing industry requires problem solutions in total, including not only processing and operation control divisions but also quality control, design and production technology, and maintenance divisions. This paper describes solutions for HACCP (hazard analysis critical control point) support, quality control, and maintenance, in order to improve the quality level, ensure traceability and realize stable processing operations. (author)

  1. Single-chip low-cost time counter for distance measurements with 3 cm resolution Un compteur de temps intégré économique pour les mesures de distance avec une résolution de 3 cm

    Science.gov (United States)

    Kalisz, Jozef; Szplet, Ryszard; Pelka, Ryszard; Poniecki, Andrzej

    1998-06-01

    A new design of fully integrated time counter is presented for application in laser ranging systems with 3 cm resolution. The counter is implemented on a single FPGA chip with amorphous antifuse structures. The counter contains two time-to-digital converters, each having 200 ps resolution least-significant bit (LSB) within a 10 ns range and a 32-bit, 100 MHz real-time counter. The control software and a versatile user interface, developed with the aid of the Delphi tools, are also described. At an ambient temperature of 0150-536X/29/3/018/img1 we achieved a random error of 129 ps or 0.65 LSB. This is equivalent to a random error in the distance measurement equal to about 2.1 cm. The power consumption of the integrated counter is 5.2 mW when the clock is disconnected, which rises to about 390 mW in the active mode.

  2. Trapping and manipulating single molecules of DNA

    Science.gov (United States)

    Shon, Min Ju

    This thesis presents the development and application of nanoscale techniques to trap and manipulate biomolecules, with a focus on DNA. These methods combine single-molecule microscopy and nano- and micro-fabrication to study biophysical properties of DNA and proteins. The Dimple Machine is a lab-on-a-chip device that can isolate and confine a small number of molecules from a bulk solution. It traps molecules in nanofabricated chambers, or "dimples", and the trapped molecules are then studied on a fluorescence microscope at the single-molecule level. The sampling of bulk solution by dimples is representative, reproducible, and automated, enabling highthroughput single-molecule experiments. The device was applied to study hybridization of oligonucleotides, particularly in the context of reaction thermodynamics and kinetics in nanoconfinement. The DNA Pulley is a system to study protein binding and the local mechanical properties of DNA. A molecule of DNA is tethered to a surface on one end, and a superparamagnetic bead is attached to the other. A magnet pulls the DNA taut, and a silicon nitride knife with a nanoscale blade scans the DNA along its contour. Information on the local properties of the DNA is extracted by tracking the bead with nanometer precision in a white-light microscope. The system can detect proteins bound to DNA and localize their recognition sites, as shown with a model protein, EcoRI restriction enzyme. Progress on the measurements of nano-mechanical properties of DNA is included.

  3. Fast Wideband Solutions Obtained Using Model Based Parameter Estimation with Method of Moments

    Directory of Open Access Journals (Sweden)

    F. Kaburcuk

    2017-10-01

    Full Text Available Integration of the Model Based Parameter Estimation (MBPE technique into Method of Moments (MOM provides fast solutions over a wide frequency band to solve radiation and scattering problems. The MBPE technique uses the Padé rational function to approximate solutions over a wide frequency band from a solution at a fixed frequency. In this paper, the MBPE technique with MOM is applied to a thin-wire antenna. The solutions obtained by repeated simulations of MOM agree very well with the solutions obtained by MBPE technique in a single simulation. Therefore, MBPE technique according to MOM provides a remarkable saving in the computation time. Computed results show that solutions at a wider frequency band of interest are achieved in a single simulation.

  4. Single-Molecule Spectroscopy

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 2. Single-Molecule Spectroscopy: Every Molecule is Different! Kankan Bhattacharyya. General Article Volume 20 Issue 2 February 2015 pp 151-164. Fulltext. Click here to view fulltext PDF. Permanent link:

  5. Single Item Inventory Models

    NARCIS (Netherlands)

    E.M. Bazsa-Oldenkamp; P. den Iseger

    2001-01-01

    textabstractThis paper extends a fundamental result about single-item inventory systems. This approach allows more general performance measures, demand processes and order policies, and leads to easier analysis and implementation, than prior research. We obtain closed form expressions for the

  6. Single Nucleotide Polymorphism

    DEFF Research Database (Denmark)

    Børsting, Claus; Pereira, Vania; Andersen, Jeppe Dyrberg

    2014-01-01

    Single nucleotide polymorphisms (SNPs) are the most frequent DNA sequence variations in the genome. They have been studied extensively in the last decade with various purposes in mind. In this chapter, we will discuss the advantages and disadvantages of using SNPs for human identification...

  7. Single Value Devices

    NARCIS (Netherlands)

    Mader, Angelika H.; Dertien, Edwin Christian; Reidsma, Dennis

    2011-01-01

    We live in a world of continuous information overflow, but the quality of information and communication is suffering. Single value devices contribute to the information and communication quality by fo- cussing on one explicit, relevant piece of information. The information is decoupled from a

  8. Single Value Devices

    NARCIS (Netherlands)

    Mader, Angelika H.; Dertien, Edwin Christian; Reidsma, Dennis; Camurri, Antonio; Costa, Cristina

    We live in a world of continuous information overflow, but the quality of information and communication is suffering. Single value devices contribute to information and communication quality by focussing on one explicit, relevant piece of information. The information is decoupled from a computer and

  9. Single Value Devices

    NARCIS (Netherlands)

    Mader, Angelika H.; Reidsma, Dennis; Dertien, Edwin Christian; Volpe, G; Kolkmeier, Jan; Camurri, A.; Kolkmeier, Jan; Nijholt, Antinus

    2015-01-01

    We live in a world of continuous information overflow, but the quality of information and communication is suffering. Single value devices contribute to the information and communication quality by focussing on one explicit, relevant piece of information. The information is decoupled from a computer

  10. Beware the single hit!

    CERN Multimedia

    2008-01-01

    The first time that single particle effects from cosmic rays on electronics were observed was in 1991, when one of the instruments aboard an ESA satellite broke down after only five days in space. On 5 July, the TS-LEA group will have completed the installation of monitors that will help to reduce similar dangerous effects on LHC electronics.

  11. Single reusable spacecraft

    Data.gov (United States)

    National Aeronautics and Space Administration — Design of a my single person reusable spacecraft. It can carry one person and it has to be dropped from an aircraft at an altitude of 40,000 - 45,000 feet. Can be...

  12. Single-Molecule Spectroscopy

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 2. Single-Molecule Spectroscopy: Every Molecule is Different! ... Author Affiliations. Kankan Bhattacharyya1. Department of Physical Chemistry, Indian Association for the Cultivation of Science Jadavpur, Kolkata 700 032 India.

  13. Single photon and nonlocality

    Indian Academy of Sciences (India)

    In a paper by Home and Agarwal [1], it is claimed that quantum nonlocality can be revealed in a simple interferometry experiment using only single particles. A critical analysis of the concept of hidden variable used by the authors of [1] shows that the reasoning is not correct.

  14. Beyond the Single Story

    Science.gov (United States)

    McKenney, Yekaterina

    2016-01-01

    Teachers of world literature have the opportunity to help students explore the more complex reality behind the stereotypes that they often see in the media. If we don't encourage students to challenge one-dimensional "single stories" that characterize an entire people--whether Muslims, Russians, Mexicans, African Americans, Chinese,…

  15. Czochralski method of growing single crystals. State-of-art

    International Nuclear Information System (INIS)

    Bukowski, A.; Zabierowski, P.

    1999-01-01

    Modern Czochralski method of single crystal growing has been described. The example of Czochralski process is given. The advantages that caused the rapid progress of the method have been presented. The method limitations that motivated the further research and new solutions are also presented. As the example two different ways of the technique development has been described: silicon single crystals growth in the magnetic field; continuous liquid feed of silicon crystals growth. (author)

  16. Analytical Solution of Mathieu Equation

    OpenAIRE

    Yerchuck, Dmitri; Dovlatova, Alla; Yerchak, Yauhen; Borovik, Felix

    2014-01-01

    The general solution of the homogeneous damped Mathieu equation in the analytical form, allowing its practical using in many applications, including superconductivity studies, without numerical calculations has been found.

  17. Hydrophobic solvation of nonspherical solutes

    International Nuclear Information System (INIS)

    Pratt, L.R.; Chandler, D.

    1980-01-01

    The theory of hydrophobic effects presented by Pratt and Chandler is generalized to include nonpolar solutes which are distinctly aspherical. The theory is used to study the solvation of simple aspherical hydrocarbon solutes in liquid water. The radial solvation of each component of diatomiclike solutes is studied as a function of their separation, or bond length. From these results it is found that when the bond length is large enough that one water molecule can fit between the apolar pair, the radial solvation of each is the same as that when the bond length approaches infinity. The solvation of the various sites of the homologous series methane, ethane, propane, and n-butane is also studied, and effects of the geometrical structure of the solutes on their solvation is discussed

  18. THERMODYNAMIC PARAMETERS OF SOLUTIONS OF ...

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... THERMODYNAMIC PARAMETERS OF SOLUTIONS OF SILDENAFIL CITRATE. IN SOME ORGANIC SOLVENTS AT DIFFERENT TEMPERATURES. S. Baluja* and K. Bhesaniya. Physical Chemistry Laboratory, Department of Chemistry,. Saurashtra University, Rajkot-360005 (Gujarat), India. Received: 24 ...

  19. Clean Energy Solutions Center Services

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  20. Solutions of Nonlocal -Laplacian Equations

    Directory of Open Access Journals (Sweden)

    Mustafa Avci

    2013-01-01

    Full Text Available In view of variational approach we discuss a nonlocal problem, that is, a Kirchhoff-type equation involving -Laplace operator. Establishing some suitable conditions, we prove the existence and multiplicity of solutions.

  1. Solute carrier transporters: Pharmacogenomics research ...

    African Journals Online (AJOL)

    Aghogho

    2010-12-27

    -binding cassette) transporters, which include MDR1, a protein that pumps xenobiotics from cells, and the SLC (solute carrier) trans- porters, which take up neurotransmitters, nutrients, heavy metals, and other substrates into ...

  2. Strongly nonlinear oscillators analytical solutions

    CERN Document Server

    Cveticanin, Livija

    2014-01-01

    This book provides the presentation of the motion of pure nonlinear oscillatory systems and various solution procedures which give the approximate solutions of the strong nonlinear oscillator equations. The book presents the original author’s method for the analytical solution procedure of the pure nonlinear oscillator system. After an introduction, the physical explanation of the pure nonlinearity and of the pure nonlinear oscillator is given. The analytical solution for free and forced vibrations of the one-degree-of-freedom strong nonlinear system with constant and time variable parameter is considered. Special attention is given to the one and two mass oscillatory systems with two-degrees-of-freedom. The criteria for the deterministic chaos in ideal and non-ideal pure nonlinear oscillators are derived analytically. The method for suppressing chaos is developed. Important problems are discussed in didactic exercises. The book is self-consistent and suitable as a textbook for students and also for profess...

  3. Transnistria: Prospects for a Solution

    National Research Council Canada - National Science Library

    Urse, Cristian

    2007-01-01

    .... After the conclusion of the agreement that ended the armed conflict, Chisinau and Tiraspol made efforts to find a political solution, under the supervision of a negotiation mechanism that included...

  4. Adolescents: Health Risks and Solutions

    Science.gov (United States)

    ... fever » Home / News / Fact sheets / Detail Nik Naubauer Adolescents: health risks and solutions 5 February 2018 ","datePublished":" ... adolescents in some high-income countries. Rights of adolescents The rights of children (people under 18 years ...

  5. All static spherically symmetric perfect-fluid solutions of Einstein's equations

    International Nuclear Information System (INIS)

    Lake, Kayll

    2003-01-01

    An algorithm based on the choice of a single monotone function (subject to boundary conditions) is presented which generates all regular static spherically symmetric perfect-fluid solutions of Einstein's equations. For physically relevant solutions the generating functions must be restricted by nontrivial integral-differential inequalities. Nonetheless, the algorithm is demonstrated here by the construction of an infinite number of previously unknown physically interesting exact solutions

  6. Electrolyte and Haemogram changes post large volume liposuction comparing two different tumescent solutions

    OpenAIRE

    Vivek, Kumar; Amiti, Shah; Shivshankar, Saha; Lalit, Choudhary

    2014-01-01

    Background: The most common definitions of large volume liposuction refer to total 5 l volume aspiration during a single procedure (fat plus wetting solution). Profound haemodynamic and metabolic alterations can accompany large volume liposuction. Due to paucity of literature on the effect of different tumescent solutions on the electrolyte balance and haematological changes during large volume liposuction, we carried out this study using two different wetting solutions to study the same. Mat...

  7. Classical solutions of quasielliptic equations

    International Nuclear Information System (INIS)

    Belonosov, V S

    1999-01-01

    Fundamental solutions of quasielliptic equations are constructed; this allows the author to develop a relevant theory of volume potentials, establish estimates for the Holder norms of solutions of equations with constant coefficients, and extend them after that to equations with variable coefficients. As a result, sharp Schauder-type interior estimates are obtained, of which the well-known classical results for elliptic and parabolic equations are special cases

  8. Radiolysis of Aqueous Toluene Solutions

    International Nuclear Information System (INIS)

    Christensen, H.C.; Gustafson, R.

    1971-04-01

    Aqueous toluene solutions have been irradiated with Co γ-rays. In unbuffered solutions the various cresol isomers are formed in a total yield of 0.45, 0.87 and 0.94 molecules/100 eV absorbed energy in argon-, N 2 O- and air - saturated solutions, respectively. The yields are reduced in acid (pH 3) solutions (G 0.14, 0.14 and 0.52, respectively) but the reduction is compensated by the formation of 1,2-di-phenylethane in yields of 0.49 and 1.60 in argon- and N 2 O-saturated solutions, respectively. Benzyl radicals are formed through an acid catalysed water elimination reaction from the initially formed hydroxymethylcyclohexadienyl radical. Phenyltolylmethanes, dimethylbiphenyls and partly reduced dimers are also formed during the radiolysis. Hydrogen is formed in the same yield as the molecular yield, g(H 2 ). Xylene isomers and benzene are formed in trace quantities. The most remarkable effects of the addition of Fe(III) ions to deaerated acid toluene solutions are the formation of benzyl alcohol and benzaldehyde and an increase in the yield of 1,2-diphenylethane

  9. Reuse of hydroponic waste solution.

    Science.gov (United States)

    Kumar, Ramasamy Rajesh; Cho, Jae Young

    2014-01-01

    Attaining sustainable agriculture is a key goal in many parts of the world. The increased environmental awareness and the ongoing attempts to execute agricultural practices that are economically feasible and environmentally safe promote the use of hydroponic cultivation. Hydroponics is a technology for growing plants in nutrient solutions with or without the use of artificial medium to provide mechanical support. Major problems for hydroponic cultivation are higher operational cost and the causing of pollution due to discharge of waste nutrient solution. The nutrient effluent released into the environment can have negative impacts on the surrounding ecosystems as well as the potential to contaminate the groundwater utilized by humans for drinking purposes. The reuse of non-recycled, nutrient-rich hydroponic waste solution for growing plants in greenhouses is the possible way to control environmental pollution. Many researchers have successfully grown several plant species in hydroponic waste solution with high yield. Hence, this review addresses the problems associated with the release of hydroponic waste solution into the environment and possible reuse of hydroponic waste solution as an alternative resource for agriculture development and to control environmental pollution.

  10. A Class of Quasi-exact Solutions of Rabi Hamiltonian

    International Nuclear Information System (INIS)

    Pan Feng; Yao Youkun; Xie Mingxia; Han Wenjuan; Draayer, J.P.

    2007-01-01

    A class of quasi-exact solutions of the Rabi Hamiltonian, which describes a two-level atom interacting with a single-mode radiation field via a dipole interaction without the rotating-wave approximation, are obtained by using a wavefunction ansatz. Exact solutions for part of the spectrum are obtained when the atom-field coupling strength and the field frequency satisfy certain relations. As an example, the lowest exact energy level and the corresponding atom-field entanglement at the quasi-exactly solvable point are calculated and compared to results from the Jaynes-Cummings and counter-rotating cases of the Rabi Hamiltonian.

  11. General solution of the scattering equations

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, Louise [Department of Physics, University of North Carolina,Chapel Hill, NC 27599 (United States); Goddard, Peter [School of Natural Sciences, Institute for Advanced Study,Princeton, NJ 08540 (United States)

    2016-10-26

    The scattering equations, originally introduced by Fairlie and Roberts in 1972 and more recently shown by Cachazo, He and Yuan to provide a kinematic basis for describing tree amplitudes for massless particles in arbitrary space-time dimension, have been reformulated in polynomial form. The scattering equations for N particles are equivalent to N−3 polynomial equations h{sub m}=0, 1≤m≤N−3, in N−3 variables, where h{sub m} has degree m and is linear in the individual variables. Facilitated by this linearity, elimination theory is used to construct a single variable polynomial equation, Δ{sub N}=0, of degree (N−3)! determining the solutions. Δ{sub N} is the sparse resultant of the system of polynomial scattering equations and it can be identified as the hyperdeterminant of a multidimensional matrix of border format within the terminology of Gel’fand, Kapranov and Zelevinsky. Macaulay’s Unmixedness Theorem is used to show that the polynomials of the scattering equations constitute a regular sequence, enabling the Hilbert series of the variety determined by the scattering equations to be calculated, independently showing that they have (N−3)! solutions.

  12. Polymer solution phase separation: Microgravity simulation

    Science.gov (United States)

    Cerny, Lawrence C.; Sutter, James K.

    1989-01-01

    In many multicomponent systems, a transition from a single phase of uniform composition to a multiphase state with separated regions of different composition can be induced by changes in temperature and shear. The density difference between the phase and thermal and/or shear gradients within the system results in buoyancy driven convection. These differences affect kinetics of the phase separation if the system has a sufficiently low viscosity. This investigation presents more preliminary developments of a theoretical model in order to describe effects of the buoyancy driven convection in phase separation kinetics. Polymer solutions were employed as model systems because of the ease with which density differences can be systematically varied and because of the importance of phase separation in the processing and properties of polymeric materials. The results indicate that the kinetics of the phase separation can be performed viscometrically using laser light scattering as a principle means of following the process quantitatively. Isopycnic polymer solutions were used to determine the viscosity and density difference limits for polymer phase separation.

  13. Single sheet iron oxides

    DEFF Research Database (Denmark)

    Yin, Zhou

    activity. LDH single sheets have been reported to be effective sorbents, catalysts in electrochemical and photochemical reactions, and building thin films together with other nanomaterials for designing new functionalities. Here we focus on the delamination of FeII-FeIII LDHs into single sheet iron oxide...... was rapid compared to other iron oxides, reaching equilibrium within 60 minutes. Arsenic sorption and acid-base titration data could be successfully described with a 1pk Basic Stern Model (BSM). The point of zero charge was around 8. The intrinsic surface complexation equilibrium constants (log K...... became abundant at low pH. (3) Electrochemical reduction of chlorinated compounds using an SSI modified electrode. Here, the electrochemical reactivity of SSIs coated on indium tin oxide coated glass electrodes was investigated. Iron on the SSI modified electrode showed a typical Cyclic Voltammetry...

  14. Single frequency semiconductor lasers

    CERN Document Server

    Fang, Zujie; Chen, Gaoting; Qu, Ronghui

    2017-01-01

    This book systematically introduces the single frequency semiconductor laser, which is widely used in many vital advanced technologies, such as the laser cooling of atoms and atomic clock, high-precision measurements and spectroscopy, coherent optical communications, and advanced optical sensors. It presents both the fundamentals and characteristics of semiconductor lasers, including basic F-P structure and monolithic integrated structures; interprets laser noises and their measurements; and explains mechanisms and technologies relating to the main aspects of single frequency lasers, including external cavity lasers, frequency stabilization technologies, frequency sweeping, optical phase locked loops, and so on. It paints a clear, physical picture of related technologies and reviews new developments in the field as well. It will be a useful reference to graduate students, researchers, and engineers in the field.

  15. Magnetic Damping of Solid Solution Semiconductor Alloys

    Science.gov (United States)

    Szofran, Frank R.; Benz, K. W.; Croell, Arne; Dold, Peter; Cobb, Sharon D.; Volz, Martin P.; Motakef, Shariar

    1999-01-01

    The objective of this study is to: (1) experimentally test the validity of the modeling predictions applicable to the magnetic damping of convective flows in electrically conductive melts as this applies to the bulk growth of solid solution semiconducting materials; and (2) assess the effectiveness of steady magnetic fields in reducing the fluid flows occurring in these materials during processing. To achieve the objectives of this investigation, we are carrying out a comprehensive program in the Bridgman and floating-zone configurations using the solid solution alloy system Ge-Si. This alloy system has been studied extensively in environments that have not simultaneously included both low gravity and an applied magnetic field. Also, all compositions have a high electrical conductivity, and the materials parameters permit reasonable growth rates. An important supporting investigation is determining the role, if any, that thermoelectromagnetic convection (TEMC) plays during growth of these materials in a magnetic field. TEMC has significant implications for the deployment of a Magnetic Damping Furnace in space. This effect will be especially important in solid solutions where the growth interface is, in general, neither isothermal nor isoconcentrational. It could be important in single melting point materials, also, if faceting takes place producing a non-isothermal interface. In conclusion, magnetic fields up to 5 Tesla are sufficient to eliminate time-dependent convection in silicon floating zones and possibly Bridgman growth of Ge-Si alloys. In both cases, steady convection appears to be more significant for mass transport than diffusion, even at 5 Tesla in the geometries used here. These results are corroborated in both growth configurations by calculations.

  16. Watching single molecules dance

    Science.gov (United States)

    Mehta, Amit Dinesh

    Molecular motors convert chemical energy, from ATP hydrolysis or ion flow, into mechanical motion. A variety of increasingly precise mechanical probes have been developed to monitor and perturb these motors at the single molecule level. Several outstanding questions can be best approached at the single molecule level. These include: how far does a motor progress per energy quanta consumed? how does its reaction cycle respond to load? how many productive catalytic cycles can it undergo per diffusional encounter with its track? and what is the mechanical stiffness of a single molecule connection? A dual beam optical trap, in conjunction with in vitro ensemble motility assays, has been used to characterize two members of the myosin superfamily: muscle myosin II and chick brain myosin V. Both move the helical polymer actin, but myosin II acts in large ensembles to drive muscle contraction or cytokinesis, while myosin V acts in small numbers to transport vesicles. An optical trapping apparatus was rendered sufficiently precise to identify a myosin working stroke with 1nm or so, barring systematic errors such as those perhaps due to random protein orientations. This and other light microscopic motility assays were used to characterize myosin V: unlike myosin II this vesicle transport protein moves through many increments of travel while remaining strongly bound to a single actin filament. The step size, stall force, and travel distance of myosin V reveal a remarkably efficient motor capable of moving along a helical track for over a micrometer without significantly spiraling around it. Such properties are fully consistent with the putative role of an organelle transport motor, present in small numbers to maintain movement over long ranges relative to cellular size scales. The contrast between myosin II and myosin V resembles that between a human running on the moon and one walking on earth, where the former allows for faster motion when in larger ensembles but for less

  17. Single Purpose Satellite Systems

    OpenAIRE

    Watkins, Warren

    1989-01-01

    This paper examines the need for tactically responsive space systems capable of supporting battlefield and fleet commanders. Terminology used to describe this category of satellite system varies according to organization or agency. The Defense Advanced Research Projects Agency's Lightsat, the Naval Space Command's SPINSAT, and the Air Force Space Command s TACSAT, are reviewed. The United State Space Command's space support mission IS addressed and the role single-purpose satellites can play ...

  18. The growth of sapphire single crystals

    Directory of Open Access Journals (Sweden)

    STEVAN DJURIC

    2001-06-01

    Full Text Available Sapphire (Al2O3 single crystals were grown by the Czochralski technique both in air and argon atmospheres. The conditions for growing sapphire single crystals were calculated by using a combination of Reynolds and Grashof numbers. Acritical crystal diameter dc = 20 mm and the critical rate of rotation wc = 20 rpm were calculated from the hydrodynamics of the melt. The value of the rate of crystal growth was experimentally found to be 3.5 mm/h. According to our previous experiments, it was confirmed that three hours exposures to conc. H3PO4 at 593 K was suitable for chemical polishing. Also, three hours exposure to conc.H3PO4 at 523 K was found to be a suitable etching solution. The lattice parameters a = 0.47573 nm and c = 1.29893 nm were determined by X-ray powder diffraction. The obtained results are discussed and compared with published data.

  19. A single sensor and single actuator approach to performance tailoring over a prescribed frequency band.

    Science.gov (United States)

    Wang, Jiqiang

    2016-03-01

    Restricted sensing and actuation control represents an important area of research that has been overlooked in most of the design methodologies. In many practical control engineering problems, it is necessitated to implement the design through a single sensor and single actuator for multivariate performance variables. In this paper, a novel approach is proposed for the solution to the single sensor and single actuator control problem where performance over any prescribed frequency band can also be tailored. The results are obtained for the broad band control design based on the formulation for discrete frequency control. It is shown that the single sensor and single actuator control problem over a frequency band can be cast into a Nevanlinna-Pick interpolation problem. An optimal controller can then be obtained via the convex optimization over LMIs. Even remarkable is that robustness issues can also be tackled in this framework. A numerical example is provided for the broad band attenuation of rotor blade vibration to illustrate the proposed design procedures. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  20. Single rotor turbine engine

    Science.gov (United States)

    Platts, David A.

    2002-01-01

    There has been invented a turbine engine with a single rotor which cools the engine, functions as a radial compressor, pushes air through the engine to the ignition point, and acts as an axial turbine for powering the compressor. The invention engine is designed to use a simple scheme of conventional passage shapes to provide both a radial and axial flow pattern through the single rotor, thereby allowing the radial intake air flow to cool the turbine blades and turbine exhaust gases in an axial flow to be used for energy transfer. In an alternative embodiment, an electric generator is incorporated in the engine to specifically adapt the invention for power generation. Magnets are embedded in the exhaust face of the single rotor proximate to a ring of stationary magnetic cores with windings to provide for the generation of electricity. In this alternative embodiment, the turbine is a radial inflow turbine rather than an axial turbine as used in the first embodiment. Radial inflow passages of conventional design are interleaved with radial compressor passages to allow the intake air to cool the turbine blades.

  1. Solute-matrix and Solute-Solute Interactions during Supercritical Fluid Extraction of Sea Buckthorn Leaves

    Czech Academy of Sciences Publication Activity Database

    Sajfrtová, Marie; Sovová, Helena

    2012-01-01

    Roč. 42, SI (2012), s. 1682-1691 E-ISSN 1877-7058. [International Congress of Chemical and Process Engineering CHISA 2012 and 15th Conference PRES 2012 /20./. Prague, 25.08.2012-29.08.2012] R&D Projects: GA TA ČR TA01010578 Institutional support: RVO:67985858 Keywords : supercritical fluid extraction * sea buckthom leaves * solute-solute interaction Subject RIV: CI - Industrial Chemistry, Chemical Engineering

  2. Radiolysis of Aqueous Benzene Solutions

    International Nuclear Information System (INIS)

    Christensen, H.

    1964-05-01

    Aerated and deaerated aqueous solutions of benzene have been irradiated with 60 Co γ-rays. The products of radiolysis in deaerated, unbuffered or acid, solutions were phenol, biphenyl, hydrogen and in acid solutions also hydrogen peroxide with the following yields: G(phenol) = 0. 37 (0. 37), G(biphenyl) = 1.3 (1.7), G(H 2 ) = 0.44 (0. 43) and G(H 2 O 2 ) = 0 (0.60), the figures in brackets giving the results for acid solutions. The results are shown to agree with the conclusion that k(e - aq + H 2 O 2 ) >> k(H + H 2 O 2 ). Furthermore, the results indicate that a competition takes place between the reactions: 2 C 6 H 6 OH · -> dimer -> biphenyl. C 6 H 7 · + C 6 H 6 OH · -> dimer -> biphenyl. The yields in aerated, unbuffered or acid, solutions were: G(phenol) = 2.1 (2.3), G(biphenyl) = 0 (0), and G(H 2 O 2 ) = 2.2 (3.1), the figures in brackets being valid for acid solutions. The ratio k(H + C 6 H 6 )/k(H + O 2 ) was 1.4x10 -2 . The results indicate that peroxides, or more probably hydroperoxides, take part in the reactions. After the addition of Fe 2+ or Fe 3+ to aerated acid solutions G(phenol) was increased to 6.6 and 3.4 respectively. Oxygen was consumed more rapidly in the presence of Fe. Reaction mechanisms are discussed

  3. Crystallization and mechanical properties of functionalized single-walled carbon nanotubes/polyvinylidene fluoride composites

    DEFF Research Database (Denmark)

    Ma, Jing; Iftekharul Haque, Rubaiyet; Larsen, Mikael

    2012-01-01

    Single-walled carbon nanotubes were purified and functionalized by nitric acid and octadecylamine. Raman and Fourier transform infrared spectroscopy were used to characterize the functionalization of the single-walled carbon nanotubes. Polyvinylidene flouride nanocomposites containing 1 wt......% purified or functionalized single-walled carbon nanotubes were prepared by solution blending and injection molding. The dispersion of different carbon nanotubes in dimethylformamide and in polyvinylidene flouride has been investigated. Mechanical properties show that adding single-walled carbon nanotubes...

  4. Single water entropy: hydrophobic crossover and application to drug binding.

    Science.gov (United States)

    Sasikala, Wilbee D; Mukherjee, Arnab

    2014-09-11

    Entropy of water plays an important role in both chemical and biological processes e.g. hydrophobic effect, molecular recognition etc. Here we use a new approach to calculate translational and rotational entropy of the individual water molecules around different hydrophobic and charged solutes. We show that for small hydrophobic solutes, the translational and rotational entropies of each water molecule increase as a function of its distance from the solute reaching finally to a constant bulk value. As the size of the solute increases (0.746 nm), the behavior of the translational entropy is opposite; water molecules closest to the solute have higher entropy that reduces with distance from the solute. This indicates that there is a crossover in translational entropy of water molecules around hydrophobic solutes from negative to positive values as the size of the solute is increased. Rotational entropy of water molecules around hydrophobic solutes for all sizes increases with distance from the solute, indicating the absence of crossover in rotational entropy. This makes the crossover in total entropy (translation + rotation) of water molecule happen at much larger size (>1.5 nm) for hydrophobic solutes. Translational entropy of single water molecule scales logarithmically (Str(QH) = C + kB ln V), with the volume V obtained from the ellipsoid of inertia. We further discuss the origin of higher entropy of water around water and show the possibility of recovering the entropy loss of some hypothetical solutes. The results obtained are helpful to understand water entropy behavior around various hydrophobic and charged environments within biomolecules. Finally, we show how our approach can be used to calculate the entropy of the individual water molecules in a protein cavity that may be replaced during ligand binding.

  5. Uniform Single Valued Neutrosophic Graphs

    Directory of Open Access Journals (Sweden)

    S. Broumi

    2017-09-01

    Full Text Available In this paper, we propose a new concept named the uniform single valued neutrosophic graph. An illustrative example and some properties are examined. Next, we develop an algorithmic approach for computing the complement of the single valued neutrosophic graph. A numerical example is demonstrated for computing the complement of single valued neutrosophic graphs and uniform single valued neutrosophic graph.

  6. Breathers and Soliton Solutions for a Generalization of the Nonlinear Schrödinger Equation

    Directory of Open Access Journals (Sweden)

    Hai-Feng Zhang

    2013-01-01

    Full Text Available A generalized nonlinear Schrödinger equation, which describes the propagation of the femtosecond pulse in single mode optical silica fiber, is analytically investigated. By virtue of the Darboux transformation method, some new soliton solutions are generated: the bright one-soliton solution on the zero background, the dark one-soliton solution on the continuous wave background, the Akhmediev breather which delineates the modulation instability process, and the breather evolving periodically along the straight line with a certain angle of x-axis and t-axis. Those results might be useful in the study of the femtosecond pulse in single mode optical silica fiber.

  7. Atomistic simulations of dilute polyelectrolyte solutions.

    Science.gov (United States)

    Park, Soohyung; Zhu, Xiao; Yethiraj, Arun

    2012-04-12

    The properties of short chains of poly-(styrene)-co-(styrene sulfonate) are studied using atomistic molecular dynamics simulations with explicit solvent. We study single 8-mers and 16-mers with two species of counterions, Na(+) and Mg(2+), and for various degrees of sulfonation, f. We find that single trajectories do not efficiently sample configurational space, even for fairly long 100-ns simulations, because of rotational barriers caused by nonbonded interactions. Hamiltonian replica exchange molecular dynamics (HREMD) simulations or averages over multiple trajectories are required in order to obtain equilibrium properties. A polystyrene sulfonate chain adopts collapsed conformations at low f, in which the sulfonate groups are located outside the globule and benzene rings form the inner region, and adopts extended conformations as f is increased. Interestingly, the pair correlation functions between side groups of polystyrene chains are not sensitive to f and species of counterion, i.e., the balance of electrostatic repulsion between charged groups and hydrophobic attraction between benzene rings is achieved by conformational change in a way preserving pair correlations between side groups in a polymer chain. For Na(+) counterions, no localization is observed in the simulations. For Mg(2+) counterions, there is a large free energy barrier to contact pair formation between the sulfonate groups and the Mg(2+) counterions. As a consequence we do not observe the formation or breaking of contact pairs during the course of a simulation. The simulations provide insight into the important interactions and correlations in polyelectrolyte solutions.

  8. One-soliton solutions from Laplace's seed

    Indian Academy of Sciences (India)

    One-soliton solutions of axially symmetric vacuum Einstein field equations are presented in this paper. Two sets of Laplace's solutions are used as seed and it is shown that the derived solutions reduce to some already known solutions when the constants are properly adjusted. An analysis of the solutions in terms of the ...

  9. One-soliton solutions from Laplace's seed

    Indian Academy of Sciences (India)

    Abstract. One-soliton solutions of axially symmetric vacuum Einstein field equations are pre- sented in this paper. Two sets of Laplace's solutions are used as seed and it is shown that the derived solutions reduce to some already known solutions when the constants are properly adjusted. An analysis of the solutions in ...

  10. Preparation of single phase molybdenum boride

    International Nuclear Information System (INIS)

    Camurlu, Hasan Erdem

    2011-01-01

    Highlights: → Formation of Mo and a mixture of molybdenum boride phases take place in preparation of molybdenum borides. → It is intricate to prepare single phase molybdenum borides. → Formation of single phase MoB from MoO 3 + B 2 O 3 + Mg mixtures has not been reported previously. → Single phase MoB was successfully prepared through a combination of mechanochemical synthesis and annealing process. - Abstract: The formation of MoB through volume combustion synthesis (VCS), and through mechanochemical synthesis (MCS) followed by annealing has been investigated. MoO 3 , B 2 O 3 and Mg were used as reactants while MgO and NaCl were introduced as diluents. Products were leached in dilute HCl solution and were subjected to X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) examinations. Mo was the major phase component in the VCS products under all the experimental conditions. Mo 2 B, MoB, MoB 2 and Mo 2 B 5 were found as minor phases. Products of MCS contained a mixture of Mo 2 B, MoB, MoB 2 and Mo. After annealing the MCS product at 1400 deg. C for 3 h, single phase α-MoB was obtained.

  11. Spectrally resolved single-molecule electrometry

    Science.gov (United States)

    Ruggeri, F.; Krishnan, M.

    2018-03-01

    Escape-time electrometry is a recently developed experimental technique that offers the ability to measure the effective electrical charge of a single biomolecule in solution with sub-elementary charge precision. The approach relies on measuring the average escape-time of a single charged macromolecule or molecular species transiently confined in an electrostatic fluidic trap. Comparing the experiments with the predictions of a mean-field model of molecular electrostatics, we have found that the measured effective charge even reports on molecular conformation, e.g., folded or disordered state, and non-uniform charge distribution in disordered proteins or polyelectrolytes. Here we demonstrate the ability to use the spectral dimension to distinguish minute differences in electrical charge between individual molecules or molecular species in a single simultaneous measurement, under identical experimental conditions. Using one spectral channel for referenced measurement, this kind of photophysical distinguishability essentially eliminates the need for accurate knowledge of key experimental parameters, otherwise obtained through intensive characterization of the experimental setup. As examples, we demonstrate the ability to detect small differences (˜5%) in the length of double-stranded DNA fragments as well as single amino acid exchange in an intrinsically disordered protein, prothymosin α.

  12. Stability of aflatoxins in solution.

    Science.gov (United States)

    Diaz, Gonzalo J; Cepeda, Sandra M; Martos, Perry A

    2012-01-01

    The stability of aflatoxins B1, B2, G1, and G2 was studied in solutions containing different concentrations of water, acetonitrile, and/or methanol, and in autosampler vials treated with nitric acid or silanized. When stored at room temperature (20 degrees C) for 24 h, aflatoxins G1 and G2 were stable only in solutions containing 100% organic solvent, whereas aflatoxins B1 and B2 were stable in solutions of methanol-water and acetonitrile-water at greater than 60 and 40% organic content, respectively. At 5 degrees C, aflatoxins G1 and G2 showed a significant decrease in concentration only when kept in less than 20% aqueous organic solvent. Significant loss of aflatoxins was realized in standard, commercially available amber type I borosilicate autosampler vials, but chemical etching of the vials with nitric acid or with silanization prevented aflatoxin degradation. These results indicate that aflatoxins are unstable in aqueous solutions and that this instability can be counteracted by the presence of at least 20% organic solvent and keeping the solutions at 5 degrees C or by the use of treated vials.

  13. Always single and single again women: a qualitative study.

    Science.gov (United States)

    Lewis, K G; Moon, S

    1997-04-01

    What is it like to be a single woman today? Are the experiences of women who have always been single different from those who find themselves single again after having been married? How can family therapists promote the development of single women both individually and relationally? The purpose of this phenomenological, multiple-case study was to investigate perceptions of being single among heterosexual single women between the ages of 30 and 65. Nine focus group interviews and a semistructured, mailed questionnaire were used to collect the data. Constant comparative analyses were used to develop the findings. The findings were organized around the most salient theme that emerged from the analyses: single women have unresolved or unrecognized ambivalences about being single. This overarching theme was supported by three subassertions: (a) single women are aware of both the advantages and the drawbacks of being single; (b) single women are ambivalent about the reasons for their singleness; (c) although content with being single, many women simultaneously experience feelings of loss and grief. Implications for the clinical practice of family therapy and future research on single women are discussed.

  14. On the growth of calcium tartrate tetrahydrate single crystals

    Indian Academy of Sciences (India)

    Unknown

    menon, especially those involved in the gel technique. With an aim of controlling nucleation and improving the size, in the present study, we have grown pure calcium tartrate tetrahydrate single crystals using calcium formate mixed with formic acid as the supernatant solution. The grown crystals have been characterized by ...

  15. Electrostatic sensing and electrochemistry with single carbon nanotubes

    NARCIS (Netherlands)

    Heller, I.

    2009-01-01

    This thesis describes the experimental study of devices based on single carbon nanotubes in the context of (bio)sensing in aqueous solutions. Carbon nanotubes are cylindrical molecules of sp2- carbon, about one nanometer in diameter and typically several micrometers long, which have semiconducting

  16. How Users Search the Library from a Single Search Box

    Science.gov (United States)

    Lown, Cory; Sierra, Tito; Boyer, Josh

    2013-01-01

    Academic libraries are turning increasingly to unified search solutions to simplify search and discovery of library resources. Unfortunately, very little research has been published on library user search behavior in single search box environments. This study examines how users search a large public university library using a prominent, single…

  17. Conversion of Food waste to Single Cell Protein using Aspergillus ...

    African Journals Online (AJOL)

    ADOWIE PERE

    2018-03-13

    Mar 13, 2018 ... ABSTRACT: The utilization of food waste into products like single cell protein is an alternative solution to global protein shortage ... as orange, pineapple, banana, watermelon and cucumber waste as growth media for A. niger using standard techniques. ..... Waste to Wealth- Value Recovery from. Agrofood.

  18. Conversion of Food waste to Single Cell Protein using Aspergillus ...

    African Journals Online (AJOL)

    The utilization of food waste into products like single cell protein is an alternative solution to global protein shortage and to alleviate pollution problems. This investigation was carried out with food wastes such as orange, pineapple, banana, watermelon and cucumber waste as growth media for A. niger using standard ...

  19. Growth features of ammonium hydrogen d-tartrate single crystals

    Indian Academy of Sciences (India)

    Unknown

    Most of the tartrate compounds are insoluble in water and decompose before melting. Hence, single crystals of such type cannot be grown either by slow evaporation or by melt technique, but can be grown easily by gel method. Gel method is an alternative method to solution growth with controlled diffusion and the growth ...

  20. Exact anisotropic polytropic cylindrical solutions

    Science.gov (United States)

    Sharif, M.; Sadiq, Sobia

    2018-03-01

    In this paper, we study anisotropic compact stars with static cylindrically symmetric anisotropic matter distribution satisfying polytropic equation of state. We formulate the field equations as well as the corresponding mass function for the particular form of gravitational potential z(x)=(1+bx)^{η } (η =1, 2, 3) and explore exact solutions of the field equations for different values of the polytropic index. The values of arbitrary constants are determined by taking mass and radius of compact star (Her X-1). We find that resulting solutions show viable behavior of physical parameters (density, radial as well as tangential pressure, anisotropy) and satisfy the stability condition. It is concluded that physically acceptable solutions exist only for η =1, 2.

  1. Automatic validation of numerical solutions

    DEFF Research Database (Denmark)

    Stauning, Ole

    1997-01-01

    , using this method has been developed. (ADIODES is an abbreviation of `` Automatic Differentiation Interval Ordinary Differential Equation Solver''). ADIODES is used to prove existence and uniqueness of periodic solutions to specific ordinary differential equations occuring in dynamical systems theory....... These proofs of existence and uniqueness are difficult or impossible to obtain using other known methods. Also, a method for solving boundary value problems is described. Finally a method for enclosing solutions to a class of integral equations is described. This method is based on the mean value enclosure...... of an integral operator and uses interval Bernstein polynomials for enclosing the solution. Two numerical examples are given, using two orders of approximation and using different numbers of discretization points....

  2. Project Management Plan Solution Stabilization

    Energy Technology Data Exchange (ETDEWEB)

    SATO, P.K.

    1999-08-31

    This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Solutions Stabilization subproject. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Integrated Project Management Plan (IPMP) for the Plutonium Finishing Plant Stabilization and Deactivation Project, HNF-3617. This project plan is the top-level definitive project management document for the PFP Solution Stabilization subproject. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Solution Stabilization subproject. Any deviations to the document must be authorized through the appropriate change control process.

  3. Project Management Plan Solution Stabilization

    International Nuclear Information System (INIS)

    SATO, P.K.

    1999-01-01

    This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Solutions Stabilization subproject. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Integrated Project Management Plan (IPMP) for the Plutonium Finishing Plant Stabilization and Deactivation Project, HNF-3617. This project plan is the top-level definitive project management document for the PFP Solution Stabilization subproject. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Solution Stabilization subproject. Any deviations to the document must be authorized through the appropriate change control process

  4. Phase separation in polymer solutions

    Science.gov (United States)

    Widom, B.

    1993-03-01

    Since the early work of Flory we have understood the causes and main features of the separation of dilute polymer solutions into coexisting phases below the theta point of the polymer-solvent pair. Some issues concerning corrections to the mean-field theory and the reconciliation of theory with experiment remain unresolved, and these are pointed out. In recent years attention has turned to questions about the structure and tension of the interface between those dilute polymer phases. The present status of the scaling theory is reviewed. The application of the theory to the interpretation of the pioneering measurements by Shinozaki et al. of the temperature and chain-length dependence of the interfacial tension in phase-separated solutions of polystyrene in methylcyclohexane, and a more recent test of the scaling theory through measurements of the capillary length of the interface in phase-separated solutions of polymethylmethacrylate in 3-octanone (Xia, Franck and Widom), are described.

  5. Rheology of clustering protein solutions

    Science.gov (United States)

    Hudson, Steven; Dharmaraj, Vishnu; Godfrin, P. Douglas; Liu, Yun

    Here we explore the rheology of low-salt lysozyme solutions, with special interest in the extremes of high concentration and low temperature. Under these conditions, reversible clustering of protein governed by their competing short-range attraction and long-range repulsion markedly enhances viscosity. Even in these conditions, the solutions exhibit Newtonian behavior over a wide range of shear rates. To test for departures from Newtonian behavior, we examined still higher shear rates. At shear rates in excess of 10,000 /s, we find reversible shear thinning at 40 % mass fraction. These results reveal dynamics of the protein clusters and are compared with other measurements of solution dynamics by neutron spin echo scattering and dynamic light scattering.

  6. Solute Diffusivity in Undisturbed Soil

    DEFF Research Database (Denmark)

    Lægdsmand, Mette K.; Møldrup, Per; Schjønning, Per

    2012-01-01

    diffusivities independent of the tracer set used. We analyzed the whole data set using Archie's law and found a linear relation between Archie's exponent and the logarithm of the soil water matric suction in centimeters of water (pF). An analysis of seven data sets from the literature showed......Solute diffusivity in soil plays a major role in many important processes with relation to plant growth and environmental issues. Soil solute diffusivity is affected by the volumetric water content as well as the morphological characteristics of water-filled pores. The solute diffusivity in intact...... soil samples from two different tillage treatments (soil from below the depth of a harrow treatment and soil from within a moldboard plowed plow layer) was estimated based on concentration profiles using a newly developed method. The method makes use of multiple tracers (two sets of counterdiffusing...

  7. Plagiarism Detection by Online Solutions.

    Science.gov (United States)

    Masic, Izet; Begic, Edin; Dobraca, Amra

    2017-01-01

    The problem of plagiarism represents one of the burning issues of the modern scientific world. Detection of plagiarism is a problem that the Editorial Board encounters in their daily work. Software solutions represent a good solution for the detection of plagiarism. The problem of plagiarism will become most discussed topic of the modern scientific world, especially due to the development of standard measures, which rank the work of one author. Investment in education, education of young research personnel about the importance of scientific research, with paying particular attention on ethical behavior, becomes an imperative of academic staff. Editors have to invest additional effort in the development of the base of reviewers team as well as in their proper guidance, because after all, despite the software solutions, they are the best weapon to fight plagiarism. Peer review process should be a key of successful operation of each journal.

  8. Fundamental solutions of singular SPDEs

    Energy Technology Data Exchange (ETDEWEB)

    Selesi, Dora, E-mail: dora@dmi.uns.ac.rs [Department of Mathematics and Informatics, University of Novi Sad (Serbia)

    2011-07-15

    Highlights: > Fundamental solutions of linear SPDEs are constructed. > Wick-convolution product is introduced for the first time. > Fourier transformation maps Wick-convolution into Wick product. > Solutions of linear SPDEs are expressed via Wick-convolution with fundamental solutions. > Stochastic Helmholtz equation is solved. - Abstract: This paper deals with some models of mathematical physics, where random fluctuations are modeled by white noise or other singular Gaussian generalized processes. White noise, as the distributional derivative od Brownian motion, which is the most important case of a Levy process, is defined in the framework of Hida distribution spaces. The Fourier transformation in the framework of singular generalized stochastic processes is introduced and its applications to solving stochastic differential equations involving Wick products and singularities such as the Dirac delta distribution are presented. Explicit solutions are obtained in form of a chaos expansion in the Kondratiev white noise space, while the coefficients of the expansion are tempered distributions. Stochastic differential equations of the form P({omega}, D) Lozenge u(x, {omega}) = A(x, {omega}) are considered, where A is a singular generalized stochastic process and P({omega}, D) is a partial differential operator with random coefficients. We introduce the Wick-convolution operator * which enables us to express the solution as u = s*A Lozenge I{sup Lozenge (-1)}, where s denotes the fundamental solution and I is the unit random variable. In particular, the stochastic Helmholtz equation is solved, which in physical interpretation describes waves propagating with a random speed from randomly appearing point sources.

  9. Fundamental solutions of singular SPDEs

    International Nuclear Information System (INIS)

    Selesi, Dora

    2011-01-01

    Highlights: → Fundamental solutions of linear SPDEs are constructed. → Wick-convolution product is introduced for the first time. → Fourier transformation maps Wick-convolution into Wick product. → Solutions of linear SPDEs are expressed via Wick-convolution with fundamental solutions. → Stochastic Helmholtz equation is solved. - Abstract: This paper deals with some models of mathematical physics, where random fluctuations are modeled by white noise or other singular Gaussian generalized processes. White noise, as the distributional derivative od Brownian motion, which is the most important case of a Levy process, is defined in the framework of Hida distribution spaces. The Fourier transformation in the framework of singular generalized stochastic processes is introduced and its applications to solving stochastic differential equations involving Wick products and singularities such as the Dirac delta distribution are presented. Explicit solutions are obtained in form of a chaos expansion in the Kondratiev white noise space, while the coefficients of the expansion are tempered distributions. Stochastic differential equations of the form P(ω, D) ◊ u(x, ω) = A(x, ω) are considered, where A is a singular generalized stochastic process and P(ω, D) is a partial differential operator with random coefficients. We introduce the Wick-convolution operator * which enables us to express the solution as u = s*A ◊ I ◊(-1) , where s denotes the fundamental solution and I is the unit random variable. In particular, the stochastic Helmholtz equation is solved, which in physical interpretation describes waves propagating with a random speed from randomly appearing point sources.

  10. Electrical pulse fabrication of graphene nanopores in electrolyte solution

    Energy Technology Data Exchange (ETDEWEB)

    Kuan, Aaron T.; Szalay, Tamas [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States); Lu, Bo [Department of Physics, Harvard University, Cambridge, Massachusetts 02138 (United States); Xie, Ping [Oxford Nanopore Technologies, One Kendall Square, Cambridge, Massachusetts 02139 (United States); Golovchenko, Jene A., E-mail: golovchenko@physics.harvard.edu [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States); Department of Physics, Harvard University, Cambridge, Massachusetts 02138 (United States)

    2015-05-18

    Nanopores in graphene membranes can potentially offer unprecedented spatial resolution for single molecule sensing, but their fabrication has thus far been difficult, poorly scalable, and prone to contamination. We demonstrate an in-situ fabrication method that nucleates and controllably enlarges nanopores in electrolyte solution by applying ultra-short, high-voltage pulses across the graphene membrane. This method can be used to rapidly produce graphene nanopores with subnanometer size accuracy in an apparatus free of nanoscale beams or tips.

  11. Evaluation of electrical conductivity of the fertiliser solution on ...

    African Journals Online (AJOL)

    The effects of three fertiliser solutions (20:20:20, 15:5:25 and 12:30:10 NPK) with electrical conductivity (EC) of 1, 1.5 or 2 mS cm-1 on growth and flowering of Cymbidium 'Sleeping Nymph' were investigated over three years. One-year-old tissue-cultured propagules of 'Sleeping Nymph' were planted singly in plastic pots in ...

  12. New Advances in Neutron Diffraction Studies of Molecular Aqueous Solutions

    OpenAIRE

    Finney, J. L.

    1992-01-01

    Neutron scattering studies have played a major role in improving our understanding of the structures not only of simple single component liquids, but increasingly of mixtures and solutions. In addition to the improved quality of structural information available from neutrons (cf X-rays) resulting from the Q-indcpcndcnt neutron scattering factor and the ability to obtain high resolution information through access to high momentum transfer Q, the use of isotopes allows information at the partia...

  13. Single Electrode Heat Effects

    DEFF Research Database (Denmark)

    Jacobsen, Torben; Broers, G. H. J.

    1977-01-01

    The heat evolution at a single irreversibly working electrode is treated onthe basis of the Brønsted heat principle. The resulting equation is analogous to the expression for the total heat evolution in a galvanic cellwith the exception that –DeltaS is substituted by the Peltier entropy, Delta......SP, of theelectrode reaction. eta is the overvoltage at the electrode. This equation is appliedto a high temperature carbonate fuel cell. It is shown that the Peltier entropyterm by far exceeds the heat production due to the irreversible losses, and thatthe main part of heat evolved at the cathode is reabsorbed...

  14. Fluid mechanics problems and solutions

    CERN Document Server

    Spurk, Joseph H

    1997-01-01

    his collection of over 200 detailed worked exercises adds to and complements the textbook Fluid Mechanics by the same author, and illustrates the teaching material through examples. In the exercises the fundamental concepts of Fluid Mechanics are applied to obtaining the solution of diverse concrete problems, and in doing this the student's skill in the mathematical modeling of practical problems is developed. In addition, 30 challenging questions without detailed solutions have been included, and while lecturers will find these questions suitable for examinations and tests, the student himself can use them to check his understanding of the subject.

  15. Numerical methods problems and solutions

    CERN Document Server

    Jain, MK

    2004-01-01

    About the Book: Is an outline series containing brief text of numerical solution of transcendental and polynomial equations, system of linear algebraic equations and eigenvalue problems, interpolation and approximation, differentiation and integration, ordinary differential equations and complete solutions to about 300 problems. Most of these problems are given as unsolved problems in the authors earlier book. User friendly Turbo Pascal programs for commonly used numerical methods are given in the Appendix. This book can be used as a text/help book both by teachers and students. Contents:

  16. Von Neumann-Morgenstern Solutions

    Science.gov (United States)

    1975-01-01

    REFERENCES von Neumann, John, and Morgenstern , Oskar , Theory of Games and Economic Behavior, 191+4 2nd ed., 1947 3rd ed., 1953. Dresher, M., Kuhn, H...I n I^I.B.IIHI, IJI ■ , m^ »mi ■■! mi m i ■ mm AD/A-005 417 VON NEJMANN- MORGENSTERN SOLUTIONS William F. Lucas Cornell...COMMERCE m^ ^^^mmm II . REPORT OOCUM[ •H AT:O I PAG[ ~ . CiOVT IICCt:~ Technical Report No. 246 VON NEUMANN- MORGENSTERN SOLUTIONS Cornell University

  17. Teaching sustainable solutions in engineering

    DEFF Research Database (Denmark)

    Olsen, Stig Irving; Nielsen, Susanne Balslev; Ejlertsen, Marina

    2015-01-01

    The increasing societal and industrial emphasis on sustainability requests that the next generation engineers needs to be trained in the context of sustainability. One of the means to address students at DTU is the establishment of a course aimed at bachelor students from all of the university......'s study lines. The objectives of the course 'Sustainability in engineering solutions', is for the participants to understand the basic concept of sustainability and its three dimensions (people, profit, planet), as well as to analyse problems and synthesise solutions that are sustainable throughout...

  18. Hybrid Solution for Integrated Trading

    Directory of Open Access Journals (Sweden)

    Vlad DIACONITA

    2010-01-01

    Full Text Available Integrated applications are complex solutions, whose complexity are determined by the economic processes they implement, the amount of data employed (millions of records grouped in hundreds of tables, databases, hundreds of GB and the number of users. Service oriented architecture (SOA, is now the most talked-about integration solution in mainstream journals, addressing both simple applications, for a department but also at enterprise level. SOA can refer to software architecture or to a way of standardizing the technical architecture of an enterprise and it shows its value when operating in several distinct and heterogeneous environments.

  19. Electrodialysis operation with buffer solution

    Science.gov (United States)

    Hryn, John N [Naperville, IL; Daniels, Edward J [Orland Park, IL; Krumdick, Greg K [Crete, IL

    2009-12-15

    A new method for improving the efficiency of electrodialysis (ED) cells and stacks, in particular those used in chemical synthesis. The process entails adding a buffer solution to the stack for subsequent depletion in the stack during electrolysis. The buffer solution is regenerated continuously after depletion. This buffer process serves to control the hydrogen ion or hydroxide ion concentration so as to protect the active sites of electrodialysis membranes. The process enables electrodialysis processing options for products that are sensitive to pH changes.

  20. Elastic interaction of partially debonded circular inclusions. I. Theoretical solution

    DEFF Research Database (Denmark)

    Kushch, V.I.; Shmegera, S.V.; Mishnaevsky, Leon

    2010-01-01

    derived by combining the complex potentials technique with the newly derived series expansions. This solution is valid for any non-uniform far load and is finite and exact in the case of polynomial far field. Applying the superposition principle expands this theory to the multiple inclusion problem......A complete solution has been obtained of the elasticity problem for a plane containing a finite array of partially debonded circular inclusions, regarded as the open-crack model of fibrous composite with interface damage. A general displacement solution of the single-inclusion problem has been...... and provides a simple and rapidly convergent iterative algorithm. The presented numerical data show an accuracy and numerical efficiency of the proposed method and discover the way and extent to which the elastic interaction between the partially debonded inclusions affects the local fields, stress intensity...