WorldWideScience

Sample records for single short flashes

  1. Energetic and exergetic Improvement of geothermal single flash cycle

    Directory of Open Access Journals (Sweden)

    Navid Nazari

    2016-08-01

    Full Text Available This paper presents a detailed analysis of a new method for improving energetic and exergetic efficiencies of single flash cycle. The thermodynamic process of the new method consists of extracting a fraction of hot wellhead geothermal brine for the purpose of superheating saturated steam entering the turbine. Computer programming scripts were developed and optimized based on mathematical proposed models for the different components of the systems. The operating parameters such as separator temperature, geofluid wellhead enthalpy and geothermal source temperature are varied to investigate their effects on both net power output and turbine exhaust quality of the systems. Also, full exergy assessment was performed for the new design. The results of separator temperature optimization revealed that specific net power output of the new design can be boosted up to 8% and turbine exhaust quality can be diminished up to 50% as compared to common single flash cycle. In addition, for wells with higher discharge enthalpy, superheating process improve specific net power output even up to 10%. Finally, it was observed that the overall system exergy efficiency was approximately raised 3%. Article History: Received January 5th 2016; Received in revised form June 25th 2016; Accepted July 3rd 2016; Available online How to Cite This Article: Nazari, N. and Porkhial, S. (2016. Energetic and Exergetic Improvement of Geothermal Single Flash Cycle. Int. Journal of Renewable Energy Development, 5(2,129-138. http://dx.doi.org/10.14710/ijred.5.2.129-138 

  2. Modelling of flash pyrolysis of a single wood particle.

    NARCIS (Netherlands)

    Janse, A.M.C.; Janse, A.M.C.; Westerhout, R.W.J.; Westerhout, R.W.J.; Prins, W.

    2000-01-01

    Reactors for flash pyrolysis of biomass are designed to maximize the yield of bio-oil, at the expense of the by-products gas and char. To understand which chemical and physical factors influence the yield to bio-oil, the flash pyrolysis of a cylindrical wood particle with a maximum diameter of 1000

  3. Inversion recovery single-shot TurboFLASH for assessment of myocardial infarction at 3 Tesla.

    Science.gov (United States)

    Bauner, Kerstin U; Muehling, Olaf; Wintersperger, Bernd J; Winnik, Eva; Reiser, Maximilian F; Huber, Armin

    2007-06-01

    The aim of the study was to assess the diagnostic accuracy of imaging myocardial infarction with a single-shot inversion recovery turbofast low-angle shot (SS IR turboFLASH) sequence at 3.0 Tesla in comparison with an established segmented inversion recovery turboFLASH sequence at 1.5 Tesla. Fifteen patients with myocardial infarction were examined at a 1.5 Tesla magnetic resonance (MR) System (Avanto, Siemens, Medical Solutions) and at a 3.0 Tesla MR system (TIM Trio, Siemens, Medical Solutions). Imaging delayed enhancement was started 15 minutes after application of contrast material. A SS IR turboFLASH was performed at 3.0 Tesla and compared with a segmented IR turboFLASH sequence at 1.5 and at 3.0 Tesla. The IR turboFLASH sequence at 1.5 Tesla served as reference method. Infarct volumes, contrast/noise ratio (CNR) of infarcted and normal myocardium were compared with the reference method. The Single-Shot IR turboFLASH technique allows imaging 9 slices during a single breath-hold. The CNR between infarction and normal myocardium of the reference method was 6.4 at 1.5 Tesla. The mean value of CNR of the IR turboFLASH sequence was 7.3 at 3.0 Tesla for the single-shot technique and 14.1 at 3.0 Tesla for the segmented technique. No significant difference was found for the CNR values of the reference technique at 1.5 Tesla and the single-shot technique at 3.0 Tesla, however for the comparison of the segmented technique at 1.5 and at 3 Tesla (P = 0.0001). The correlation coefficients of the infarct volumes, determined with the Single-Shot IR turboFLASH and the segmented IR turboFLASH technique at 3.0 compared with the reference method, were r = 0.95 (P < 0.0001) and r = 0.95 (P < 0.0001). The loss of CNR, which is caused by replacement of the segmented technique by the single-shot technique, is completely compensated by the approximately 2-fold CNR increase at the higher field strength. The IR turboFLASH technique at 3.0 Tesla IR can be used as a single-shot technique

  4. Analysis of photoenzymatic repair of UV lesions in DNA by single light flashes. XII

    International Nuclear Information System (INIS)

    Harm, W.

    1979-01-01

    Yeast photoreactivity enzyme (PRE) preilluminated with wavelengths ranging from the near-UV to the red spectral region, forms with 254 nm-irradiated transforming DNA of Haemophilus influenzae enzyme-substrate complexes that are more efficiently photorepaired than complexes formed from non-preilluminated PRE. The action spectrum for this 'preillumination effect', previously shown to have a maximum in the near-UV region, has another maximum near 577 nm. In complexes formed from non-preilluminated PRE the repair probability per incident photon is only about 25% of that in complexes fromed from preilluminated PRE, if low-intensity photoreactivating light is applied continuously or as a sequence of flashes. However, photoreactivating light in the form of a single, high-intensity flash of 1 msec duration raises the repair probability to >50%. Two light flashes, discharged with a delay of slightly more than a millisecond, may already achieve less photorepair than the same energy given as a single flash. (Auth.)

  5. Fragmentation mechanisms based on single drop steam explosion experiments using flash X-ray radiography

    International Nuclear Information System (INIS)

    Ciccarelli, G.; Frost, D.L.

    1994-01-01

    Flash X-ray and high-speed regular photography were used to investigate the fragmentation processes during the vapor explosion of single drops of molten metal immersed in water. For relatively low ambient flow velocities ( 45 m/s), vapor bubble growth is diminished and high-speed motion of vapor within the bubble leads to an enhanced fragmentation rate. (orig.)

  6. FLASH free-electron laser single-shot temporal diagnostic: terahertz-field-driven streaking.

    Science.gov (United States)

    Ivanov, Rosen; Liu, Jia; Brenner, Günter; Brachmanski, Maciej; Düsterer, Stefan

    2018-01-01

    The commissioning of a terahertz-field-driven streak camera installed at the free-electron laser (FEL) FLASH at DESY in Hamburg, being able to deliver photon pulse duration as well as arrival time information with ∼10 fs resolution for each single XUV FEL pulse, is reported. Pulse durations between 300 fs and terahertz-streaking setup was operated simultaneously to an alternative method to determine the FEL pulse duration based on spectral analysis. FLASH pulse duration derived from simple spectral analysis is in good agreement with that from terahertz-streaking measurement.

  7. A Computer Program for Flow-Log Analysis of Single Holes (FLASH)

    Science.gov (United States)

    Day-Lewis, F. D.; Johnson, C.D.; Paillet, Frederick L.; Halford, K.J.

    2011-01-01

    A new computer program, FLASH (Flow-Log Analysis of Single Holes), is presented for the analysis of borehole vertical flow logs. The code is based on an analytical solution for steady-state multilayer radial flow to a borehole. The code includes options for (1) discrete fractures and (2) multilayer aquifers. Given vertical flow profiles collected under both ambient and stressed (pumping or injection) conditions, the user can estimate fracture (or layer) transmissivities and far-field hydraulic heads. FLASH is coded in Microsoft Excel with Visual Basic for Applications routines. The code supports manual and automated model calibration. ?? 2011, The Author(s). Ground Water ?? 2011, National Ground Water Association.

  8. Transparent Flash Memory using Single Ta2O5 Layer for both Charge Trapping and Tunneling Dielectrics

    KAUST Repository

    Hota, Mrinal Kanti

    2017-06-08

    We report reproducible multibit transparent flash memory in which a single solution-derived Ta2O5 layer is used simultaneously as charge trapping and tunneling layer. This is different from conventional flash cells, where two different dielectric layers are typically used. Under optimized programming/erasing operations, the memory device shows excellent programmable memory characteristics with a maximum memory window of ~10 V. Moreover, the flash memory device shows a stable 2-bit memory performance, good reliability, including data retention for more than 104 sec and endurance performance for more than 100 cycles. The use of a common charge trapping and tunneling layer can simplify advanced flash memory fabrication.

  9. Novel short-pulse laser diode source for high-resolution 3D flash lidar

    Science.gov (United States)

    Canal, Celine; Laugustin, Arnaud; Kohl, Andreas; Rabot, Olivier

    2017-06-01

    Imaging based on laser illumination is present in various fields of applications such as medicine, security, defense, civil engineering and in the automotive sector. In this last domain, research and development to bring autonomous vehicles on the roads has been intensified the recent years. Among the various technologies currently studied, automotive lidars are a fast-growing one due to their accuracy to detect a wide range of objects at distances up to a few hundreds of meters in various weather conditions. First commercialized devices for ADAS were laser scanners. Since then, new architectures have recently appeared such as solid-state lidar and flash lidar that offer a higher compactness, robustness and a cost reduction. Flash lidars are based on time-of-flight measurements, with the particularity that they do not require beam scanners because only one short laser pulse with a large divergence is used to enlighten the whole scene. Depth of encountered objects can then be recovered from measurement of echoed light at once, hence enabling real-time 3D mapping of the environment. This paper will bring into the picture a cutting edge laser diode source that can deliver millijoule pulses as short as 12 ns, which makes them highly suitable for integration in flash lidars. They provide a 100-kW peak power highly divergent beam in a footprint of 4x5 cm2 (including both the laser diode and driver) and with a 30-% electrical-to-optical efficiency, making them suitable for integration in environments in which compactness and power consumption are a priority. Their emission in the range of 800-1000 nm is considered to be eye safe when taking into account the high divergence of the output beam. An overview of architecture of these state-of-the-art pulsed laser diode sources will be given together with some solutions for their integration in 3D mapping systems. Future work leads will be discussed for miniaturization of the laser diode and drastic cost reduction.

  10. The Choice Method of Selected Material has influence single evaporation flash method

    International Nuclear Information System (INIS)

    Sunaryo, Geni Rina; Sumijanto; Nurul L, Siti

    2000-01-01

    The final objective of this research is to design the mini scale of desalination installation. It has been started from 1997/1998 and has been doing for this 3 years. Where the study on the assessment of various desalination system has been done in the first year and thermodynamic in the second year. In this third year, literatully study on material resistance from outside pressure has been done. The number of pressure for single evaporator flashing method is mainly depend on the temperature that applied in that system. In this paper, the configuration stage, the choice method of selecting material for main evaporator vessel, tube, tube plates, water boxes, pipework, and valves for multistage flash distillation will be described. The choice of selecting material for MSF is base on economical consideration, cheap, high resistance and easy to be maintained

  11. Heavy Ion Irradiation Fluence Dependence for Single-Event Upsets of NAND Flash Memory

    Science.gov (United States)

    Chen, Dakai; Wilcox, Edward; Ladbury, Raymond; Kim, Hak; Phan, Anthony; Seidleck, Christina; LaBel, Kenneth

    2016-01-01

    We investigated the single-event effect (SEE) susceptibility of the Micron 16 nm NAND flash, and found the single-event upset (SEU) cross section varied inversely with fluence. The SEU cross section decreased with increasing fluence. We attribute the effect to the variable upset sensitivities of the memory cells. The current test standards and procedures assume that SEU follow a Poisson process and do not take into account the variability in the error rate with fluence. Therefore, heavy ion irradiation of devices with variable upset sensitivity distribution using typical fluence levels may underestimate the cross section and on-orbit event rate.

  12. Heavy Ion Irradiation Fluence Dependence for Single-Event Upsets in a NAND Flash Memory

    Science.gov (United States)

    Chen, Dakai; Wilcox, Edward; Ladbury, Raymond L.; Kim, Hak; Phan, Anthony; Seidleck, Christina; Label, Kenneth

    2016-01-01

    We investigated the single-event effect (SEE) susceptibility of the Micron 16 nm NAND flash, and found that the single-event upset (SEU) cross section varied inversely with cumulative fluence. We attribute the effect to the variable upset sensitivities of the memory cells. Furthermore, the effect impacts only single cell upsets in general. The rate of multiple-bit upsets remained relatively constant with fluence. The current test standards and procedures assume that SEU follow a Poisson process and do not take into account the variability in the error rate with fluence. Therefore, traditional SEE testing techniques may underestimate the on-orbit event rate for a device with variable upset sensitivity.

  13. Infrared single shot diagnostics for the longitudinal profile of the electron bunches at FLASH

    International Nuclear Information System (INIS)

    Delsim-Hashemi, Hossein

    2008-09-01

    The longitudinal profile of electron bunches plays an important role in the design of single-pass free electron lasers and future linear e + e - colliders. For the free electron laser FLASH in Hamburg, a longitudinal compression scheme is used which results in an asymmetric longitudinal bunch profile with a 'spike'. This 'spike', which has a very high peak current, is used in a high-gain SASE-FEL process to produce high intensity (about 70 μJ) femtosecond photon pulses in the XUV wavelength range. The required high peak current of the electron bunch is realized by confining a large number of electrons in a width, measured in time units, of few tens of femtosecond, making the diagnostics of such bunches a challenge. Furthermore, the operation of facilities such as FLASH shows that single-shot diagnostics is indispensable. It is intuitive to use a time domain method to measure the electron bunch length. However, when the structures present in the bunch profile fall in the femtoseconds range, this is beyond the resolution of time-resolved methods developed so far. In this thesis, a wavelength-domain technique is described that can fulfill both requirements of single shot and high resolution reaching to the femtoseconds range. The amount of charge that is confined in a typical length of several femtoseconds (FWHM of the spike) can be determined by a novel single-shot spectrometer that resolves the coherent radiation (e.g. coherent transition radiation) in the far-infrared and mid-infrared range. Furthermore the extension of this single-shot spectroscopy to shorter wavelengths reaching the near-infrared, makes it possible to investigate the presence of structures in the bunch profile that might correlate or anti-correlate to the SASE intensity. (orig.)

  14. Infrared single shot diagnostics for the longitudinal profile of the electron bunches at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Delsim-Hashemi, Hossein

    2008-09-15

    The longitudinal profile of electron bunches plays an important role in the design of single-pass free electron lasers and future linear e{sup +}e{sup -} colliders. For the free electron laser FLASH in Hamburg, a longitudinal compression scheme is used which results in an asymmetric longitudinal bunch profile with a 'spike'. This 'spike', which has a very high peak current, is used in a high-gain SASE-FEL process to produce high intensity (about 70 {mu}J) femtosecond photon pulses in the XUV wavelength range. The required high peak current of the electron bunch is realized by confining a large number of electrons in a width, measured in time units, of few tens of femtosecond, making the diagnostics of such bunches a challenge. Furthermore, the operation of facilities such as FLASH shows that single-shot diagnostics is indispensable. It is intuitive to use a time domain method to measure the electron bunch length. However, when the structures present in the bunch profile fall in the femtoseconds range, this is beyond the resolution of time-resolved methods developed so far. In this thesis, a wavelength-domain technique is described that can fulfill both requirements of single shot and high resolution reaching to the femtoseconds range. The amount of charge that is confined in a typical length of several femtoseconds (FWHM of the spike) can be determined by a novel single-shot spectrometer that resolves the coherent radiation (e.g. coherent transition radiation) in the far-infrared and mid-infrared range. Furthermore the extension of this single-shot spectroscopy to shorter wavelengths reaching the near-infrared, makes it possible to investigate the presence of structures in the bunch profile that might correlate or anti-correlate to the SASE intensity. (orig.)

  15. Transparent Flash Memory Using Single Ta2O5Layer for Both Charge-Trapping and Tunneling Dielectrics.

    Science.gov (United States)

    Hota, Mrinal K; Alshammari, Fwzah H; Salama, Khaled N; Alshareef, Husam N

    2017-07-05

    We report reproducible multibit transparent flash memory in which a single solution-derived Ta 2 O 5 layer is used simultaneously as a charge-trapping layer and a tunneling layer. This is different from conventional flash memory cells where two different dielectric layers are typically used. Under optimized programming/erasing operations, the memory device shows excellent programmable memory characteristics with a maximum memory window of ∼10.7 V. Moreover, the flash memory device shows a stable 2-bit memory performance and good reliability, including data retention for more than 10 4 s and endurance performance for more than 100 cycles. The use of a common charge-trapping and tunneling layer can simplify the fabrication of advanced flash memories.

  16. Modelling single shot damage thresholds of multilayer optics for high-intensity short-wavelength radiation sources

    NARCIS (Netherlands)

    Loch, R.A.; Sobierajski, R.; Louis, Eric; Bosgra, J.; Bosgra, J.; Bijkerk, Frederik

    2012-01-01

    The single shot damage thresholds of multilayer optics for highintensity short-wavelength radiation sources are theoretically investigated, using a model developed on the basis of experimental data obtained at the FLASH and LCLS free electron lasers. We compare the radiation hardness of commonly

  17. FLASH knockdown sensitizes cells to Fas-mediated apoptosis via down-regulation of the anti-apoptotic proteins, MCL-1 and Cflip short.

    Directory of Open Access Journals (Sweden)

    Song Chen

    Full Text Available FLASH (FLICE-associated huge protein or CASP8AP2 is a large multifunctional protein that is involved in many cellular processes associated with cell death and survival. It has been reported to promote apoptosis, but we show here that depletion of FLASH in HT1080 cells by siRNA interference can also accelerate the process. As shown previously, depletion of FLASH halts growth by down-regulating histone biosynthesis and arrests the cell cycle in S-phase. FLASH knockdown followed by stimulating the cells with Fas ligand or anti-Fas antibodies was found to be associated with a more rapid cleavage of PARP, accelerated activation of caspase-8 and the executioner caspase-3 and rapid progression to cellular disintegration. As is the case for most anti-apoptotic proteins, FLASH was degraded soon after the onset of apoptosis. Depletion of FLASH also resulted in the reduced intracellular levels of the anti-apoptotic proteins, MCL-1 and the short isoform of cFLIP. FLASH knockdown in HT1080 mutant cells defective in p53 did not significantly accelerate Fas mediated apoptosis indicating that the effect was dependent on functional p53. Collectively, these results suggest that under some circumstances, FLASH suppresses apoptosis.

  18. Kinetics of oxygen consumption after a single flash of light in photoreceptors of the drone (Apis mellifera)

    OpenAIRE

    1982-01-01

    The time course of the rate of oxygen consumption (QO2) after a single flash of light has been measured in 300-micrometers slices of drone retina at 22 degrees C. To measure delta QO2(t), the change in QO2 from its level in darkness, the transients of the partial pressure of O2 (PO2) were recorded with O2 microelectrodes simultaneously in two sites in the slice and delta QO2 was calculated by a computer using Fourier transforms. After a 40-ms flash of intense light, delta QO2, reached a peak ...

  19. Fragmentation mechanisms based on single drop steam explosion experiments using flash X-ray radiography

    Energy Technology Data Exchange (ETDEWEB)

    Ciccarelli, G. (Brookhaven National Lab., Dept. of Advanced Technology, Upton, NY (United States)); Frost, D.L. (Mechanical Engineering Dept., McGill Univ., Montreal, PQ (Canada))

    1994-02-01

    Flash X-ray and high-speed regular photography were used to investigate the fragmentation processes during the vapor explosion of single drops of molten metal immersed in water. For relatively low ambient flow velocities (<5 m/s), a comparison of the breakup of hot and cold drops shows that whereas cold drops breakup due to the stripping of fragments by the relative flow, the fragmentation of a hot drop is dominated by the growth and collapse of a vapor bubble. X-ray radiographs show during the growth of the bubble, that fine filaments of metal protrude from the drop and the drop surface becomes highly convoluted. Using a simple model for the bubble dynamics, an estimate of the energy budget shows that the majority (about 80%) of the thermal energy transfer occurs during bubble collapse. For hot drops at higher flow velocities (>45 m/s), vapor bubble growth is diminished and high-speed motion of vapor within the bubble leads to an enhanced fragmentation rate. (orig.)

  20. Energy and Emission Characteristics of a Short-Arc Xenon Flash Lamp Under "Saturated" Optical Brightness Conditions

    Science.gov (United States)

    Kamrukov, A. S.; Kireev, S. G.; Kozlov, N. P.; Shashkovskii, S. G.

    2017-09-01

    We present the results of a study of the electrical, energy, and spectral brightness characteristics of an experimental three-electrode high-pressure xenon flash lamp under conditions ensuring close to maximum possible spectral brightness for the xenon emission. We show that under saturated optical brightness conditions (brightness temperature in the visible region of the spectrum 30,000 K), emission of a pulsed discharge in xenon is quite different from the emission from an ideal blackbody: the maximum brightness temperatures are 24,000 K in the short-wavelength UV region and 19,000 K in the near IR range. The relative fraction of UV radiation in the emission spectrum of the lamp is >50%, which lets us consider such lamps as promising broadband sources of radiation with high spectral brightness for many important practical applications.

  1. In-Depth Functional Diagnostics of Mouse Models by Single-Flash and Flicker Electroretinograms without Adapting Background Illumination.

    Science.gov (United States)

    Tanimoto, Naoyuki; Michalakis, Stylianos; Weber, Bernhard H F; Wahl-Schott, Christian A; Hammes, Hans-Peter; Seeliger, Mathias W

    2016-01-01

    Electroretinograms (ERGs) are commonly recorded at the cornea for an assessment of the functional status of the retina in mouse models. Full-field ERGs can be elicited by single-flash as well as flicker light stimulation although in most laboratories flicker ERGs are recorded much less frequently than singleflash ERGs. Whereas conventional single-flash ERGs contain information about layers, i.e., outer and inner retina, flicker ERGs permit functional assessment of the vertical pathways of the retina, i.e., rod system, cone ON-pathway, and cone OFF-pathway, when the responses are evoked at a relatively high luminance (0.5 log cd s/m(2)) with varying frequency (from 0.5 to 30 Hz) without any adapting background illumination. Therefore, both types of ERGs complement an in-depth functional characterization of the mouse retina, allowing for a discrimination of an underlying functional pathology. Here, we introduce the systematic interpretation of the single-flash and flicker ERGs by demonstrating several different patterns of functional phenotype in genetic mouse models, in which photoreceptors and/or bipolar cells are primarily or secondarily affected.

  2. The glass transition and enthalpy recovery of a single polystyrene ultrathin film using Flash DSC.

    Science.gov (United States)

    Koh, Yung P; Simon, Sindee L

    2017-05-28

    The kinetics of the glass transition are measured for a single polystyrene ultrathin film of 20 nm thickness using Flash differential scanning calorimetry (DSC). T g is measured over a range of cooling rates from 0.1 to 1000 K/s and is depressed compared to the bulk. The depression decreases with increasing cooling rate, from 12 K lower than the bulk at 0.1 K/s to no significant change at 1000 K/s. Isothermal enthalpy recovery measurements are performed from 50 to 115 °C, and from these experiments, the temperature dependence of the induction time along the glass line is obtained, as well as the temperature dependence of the time scale required to reach equilibrium, providing a measure of the shortest effective glassy relaxation time and the longest effective equilibrium relaxation time, respectively. The induction time for the ultrathin film is found to be similar to the bulk at all temperatures presumably because the T g values are the same due to the use of a cooling rate of 1000 K/s prior to the enthalpy recovery measurements. On the other hand, the times required to reach equilibrium for the ultrathin film and bulk are similar at 100 °C, and considerably shorter for the ultrathin film at 90 °C, consistent with faster dynamics under nanoconfinement at low temperatures. The magnitude of the "T g depression" is smaller when using the equilibrium relaxation time from the structural recovery experiment as a measure of the dynamics than when measuring T g after a cooling experiment. A relaxation map is developed to summarize the results.

  3. The glass transition and enthalpy recovery of a single polystyrene ultrathin film using Flash DSC

    Science.gov (United States)

    Koh, Yung P.; Simon, Sindee L.

    2017-05-01

    The kinetics of the glass transition are measured for a single polystyrene ultrathin film of 20 nm thickness using Flash differential scanning calorimetry (DSC). Tg is measured over a range of cooling rates from 0.1 to 1000 K/s and is depressed compared to the bulk. The depression decreases with increasing cooling rate, from 12 K lower than the bulk at 0.1 K/s to no significant change at 1000 K/s. Isothermal enthalpy recovery measurements are performed from 50 to 115 °C, and from these experiments, the temperature dependence of the induction time along the glass line is obtained, as well as the temperature dependence of the time scale required to reach equilibrium, providing a measure of the shortest effective glassy relaxation time and the longest effective equilibrium relaxation time, respectively. The induction time for the ultrathin film is found to be similar to the bulk at all temperatures presumably because the Tg values are the same due to the use of a cooling rate of 1000 K/s prior to the enthalpy recovery measurements. On the other hand, the times required to reach equilibrium for the ultrathin film and bulk are similar at 100 °C, and considerably shorter for the ultrathin film at 90 °C, consistent with faster dynamics under nanoconfinement at low temperatures. The magnitude of the "Tg depression" is smaller when using the equilibrium relaxation time from the structural recovery experiment as a measure of the dynamics than when measuring Tg after a cooling experiment. A relaxation map is developed to summarize the results.

  4. Hot Flashes

    Science.gov (United States)

    Hot flashes Overview Hot flashes are sudden feelings of warmth, which are usually most intense over the face, neck and chest. Your skin might redden, as if you're blushing. Hot flashes can also cause sweating, and if you ...

  5. Flash protection controller

    Science.gov (United States)

    Galbraith, Lee K.

    1981-01-01

    A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

  6. X-ray topographic investigation of the deformation field around spots irradiated by FLASH single pulses

    Czech Academy of Sciences Publication Activity Database

    Wierzchowski, W.; Wieteska, K.; Balcer, T.; Klinger, D.; Sobierajski, R.; Zymierska, D.; Chalupský, Jaromír; Hájková, Věra; Burian, Tomáš; Gleeson, A.J.; Juha, Libor; Tiedtke, K.; Toleikis, S.; Vyšín, Luděk; Wabnitz, H.; Gaudin, J.

    2011-01-01

    Roč. 80, č. 10 (2011), s. 1036-1040 ISSN 0969-806X R&D Projects: GA AV ČR KAN300100702; GA MŠk LC510; GA ČR(CZ) GAP108/11/1312; GA MŠk(CZ) LC528; GA MŠk LA08024; GA AV ČR IAAX00100903; GA MŠk(CZ) ME10046 Institutional research plan: CEZ:AV0Z10100523 Keywords : silicon * FLASH irradiation * x-ray topography * deformation fields Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.227, year: 2011

  7. Closing in on maximum yield of chlorophyll fluorescence using a single multiphase flash of sub-saturating intensity.

    Science.gov (United States)

    Loriaux, S D; Avenson, T J; Welles, J M; McDermitt, D K; Eckles, R D; Riensche, B; Genty, B

    2013-10-01

    Estimation of the maximum chlorophyll fluorescence yield under illumination, or Fm', by traditional single saturation pulse (SP) methodology is prone to underestimation error because of rapid turnover within photosystem (PS) II. However, measurements of fluorescence yield during several single pulses of variable intensity describes the irradiance dependence of apparent Fm', from which estimates of Fm' at infinite irradiance can be derived. While such estimates have been shown to result in valid approximations of Fm', the need to apply several single pulses limits its applicability. We introduce a novel approach that determines the relationship between apparent Fm' and variable irradiance within a single ∼1 s multiphase flash (MPF). Through experiments and simulations, we demonstrate that the rate of variation in irradiance during an MPF is critical for achieving quasi-steady-state changes in the proportions of PSII acceptor side redox intermediates and the corresponding fluorescence yields, which are prerequisites for accurately estimating Fm' at infinite irradiance. The MPF methodology is discussed in the context of improving the accuracy of various parameters derived from chlorophyll fluorescence measurements, such as photochemical and non-photochemical quenchings and efficiencies. The importance of using MPF methodology for interpreting chlorophyll fluorescence, in particular for integrating fluorescence and gas exchange measurements, is emphasized. © 2013 John Wiley & Sons Ltd.

  8. Setup of a bench for short time laser flash diffusivity measurement; Mise en place d`un banc de mesure de diffusivite flash laser aux temps courts

    Energy Technology Data Exchange (ETDEWEB)

    Remy, B.; Maillet, D.; Degiovanni, A. [Centre National de la Recherche Scientifique (CNRS), 54 - Vandoeuvre-les-Nancy (France)

    1996-12-31

    In the domain of thermal engineering, new materials have been developed which are characterized by a high thermal diffusivity (5 to 10 times greater than the best usual conductors: gold, copper, silicon..) but also by a small thickness (from few hundreds of microns to few microns). Their time of response is very short (some few milliseconds to some few microseconds) and they are mainly used as heat dissipating materials. The classical thermal diffusivity measurement techniques are unable to analyze the thermal properties of these materials. Therefore, a bench for fast thermal diffusivity measurements has been developed that uses a laser system for the excitation and for the measurement of temperature (infrared detector). In this study, the measurement bench is described and the metrological problems encountered are discussed. (J.S.) 10 refs.

  9. Stretching, twisting and supercoiling in short, single DNA molecules

    Science.gov (United States)

    Lam, Pui-Man; Zhen, Yi

    2018-02-01

    We had combined the Neukirch-Marko model that describes the extension, torque and supercoiling in single, stretched and twisted DNA of infinite contour length, with a form of the free energy suggested by Sinha and Samuels to describe short DNA, with contour length only a few times the persistence length. We find that the free energy of the stretched but untwisted DNA, is significantly modified from its infinitely length value and this in turn modifies significantly the torque and supercoiling. We show that this is consistent with short DNA being more flexible than infinitely long DNA. We hope our results will stimulate experimental investigation of torque and supercoiling in short DNA.

  10. Flash grundkursus

    DEFF Research Database (Denmark)

    Jensen, Henrik

    2008-01-01

    Flash er et programmeringssprog  og kan som sådant ikke noget i sig selv. Kursets mål er, at give den studerende et grundlæggende kendskab til Flash, så det kan bruges til præsentationer på skærm og til produktion af hjemmesider. På kurset arbejdes der med billede, grafik, lyd, video og interakti...

  11. Flash x-ray

    International Nuclear Information System (INIS)

    Johnson, Q.; Pellinen, D.

    1976-01-01

    The complementary techniques of flash x-ray radiography (FXR) and flash x-ray diffraction (FXD) provide access to a unique domain in nondestructive materials testing. FXR is useful in studies of macroscopic properties during extremely short time intervals, and FXD, the newer technique, is used in studies of microscopic properties. Although these techniques are similar in many respects, there are some substantial differences. FXD generally requires low-voltage, line-radiation sources and extremely accurate timing; FXR is usually less demanding. Phenomena which can be profitably studied by FXR often can also be studied by FXD to permit a complete materials characterization

  12. Short- and mid-wavelength artificial light influences the flash signals of Aquatica ficta fireflies (Coleoptera: Lampyridae.

    Directory of Open Access Journals (Sweden)

    Avalon Celeste Stevahn Owens

    Full Text Available Urbanization can radically disrupt natural ecosystems through alteration of the sensory environment. Habitat disturbances are predicted to favor behaviorally flexible species capable of adapting to altered environments. When artificial light at night (ALAN is introduced into urban areas, it has the potential to impede reproduction of local firefly populations by obscuring their bioluminescent courtship signals. Whether individual fireflies can brighten their signals to maintain visibility against an illuminated background remains unknown. In this study, we exposed male Aquatica ficta fireflies to diffused light of varying wavelength and intensity, and recorded their alarm flash signals. When exposed to wavelengths at or below 533 nm, males emitted brighter signals with decreased frequency. This is the first evidence of individual-level light signal plasticity in fireflies. In contrast, long wavelength ambient light (≥ 597 nm did not affect signal morphology, likely because A. ficta cannot perceive these wavelengths. These results suggest long wavelength lighting is less likely to impact firefly courtship, and its use in place of broad spectrum white lighting could augment firefly conservation efforts. More generally, this study demonstrates benefits of bioluminescent signal plasticity in a "noisy" signaling environment, and sheds light on an important yet understudied consequence of urbanization.

  13. Short- and mid-wavelength artificial light influences the flash signals of Aquatica ficta fireflies (Coleoptera: Lampyridae).

    Science.gov (United States)

    Owens, Avalon Celeste Stevahn; Meyer-Rochow, Victor Benno; Yang, En-Cheng

    2018-01-01

    Urbanization can radically disrupt natural ecosystems through alteration of the sensory environment. Habitat disturbances are predicted to favor behaviorally flexible species capable of adapting to altered environments. When artificial light at night (ALAN) is introduced into urban areas, it has the potential to impede reproduction of local firefly populations by obscuring their bioluminescent courtship signals. Whether individual fireflies can brighten their signals to maintain visibility against an illuminated background remains unknown. In this study, we exposed male Aquatica ficta fireflies to diffused light of varying wavelength and intensity, and recorded their alarm flash signals. When exposed to wavelengths at or below 533 nm, males emitted brighter signals with decreased frequency. This is the first evidence of individual-level light signal plasticity in fireflies. In contrast, long wavelength ambient light (≥ 597 nm) did not affect signal morphology, likely because A. ficta cannot perceive these wavelengths. These results suggest long wavelength lighting is less likely to impact firefly courtship, and its use in place of broad spectrum white lighting could augment firefly conservation efforts. More generally, this study demonstrates benefits of bioluminescent signal plasticity in a "noisy" signaling environment, and sheds light on an important yet understudied consequence of urbanization.

  14. Flash radiography

    International Nuclear Information System (INIS)

    Jamet, F.

    1986-01-01

    Flash radiography is a method for recording radiographic pictures of a non-transparent high-speed phenomenon. Such events occur in a variety of fields: Ballistics, dynamic high pressure physics, detonics, industry, and medical diagnostics. The phenomena observed by flash-radiography generally move at velocities between 100 m/s and 10000 m/s. The motion blur recorded on the picture is negligible only if the duration of the X-ray pulse (or the exposure time) falls in the range 10 -8 - 10 -7 s. With a medical or industrial radiographic device, the correct blackening of a film is obtained with a current of some milliamperes and a mean exposure time of 0.1 s. From this it is deduced that the value of the current passing through a flash X-ray tube must be approximately equal to 10 4 A. These values cannot be attained in conventional X-ray tubes with a heated cathode. The production of large currents is mainly achieved by vacuum discharges and field emission. Two applications of the technique are presented: flash radiographs of shock waves, and flash X-ray diffraction. (Auth.)

  15. Short implants supporting single crowns in atrophic jaws.

    Science.gov (United States)

    Al-Ansari, Asim

    2014-09-01

    PubMed-Medline, Web of Science, Cochrane Library, ProQuest Dissertations and Theses, LILACS, Ebsco-Dentistry and Oral Sciences Source, Scirus, Embase, Scopus and Journal Ovid databases were searched. In addition hand searching of 14 relevant journals was undertaken along with screening of the reference lists of screened article and reviews. Randomised controlled clinical trials (RCTs), controlled clinical trials (CCTs), prospective cohort studies and case series were included. Studies where short (biological failure proportion (BFP), prosthetic failure proportion (PFP) and radiographic marginal bone loss (MBL) were 5.9% (95% CI: 3.7-9.2%), 3.8% (95%CI: 1.9-7.4%), 2.8% (95%CI: 1.4-5.7%) and 0.83 mm (95%CI: 0.54-1.12 mm) respectively. Quantitative analysis showed that placement in the mandible (p = 0.0002) and implants with length ≤ 8 mm (p = 0.01) increased FP, BFP and MBL, whereas qualitative assessment revealed that crown-to-implant ratio did not influence MBL. Within the limitations of the present systematic review with meta-analysis, it is suggested that single crowns supported by short implants are an acceptable and predictable option in the short- and long-term treatment of the atrophic jaws.

  16. Total Ionizing Dose Influence on the Single Event Effect Sensitivity in Samsung 8Gb NAND Flash Memories

    Science.gov (United States)

    Edmonds, Larry D.; Irom, Farokh; Allen, Gregory R.

    2017-08-01

    A recent model provides risk estimates for the deprogramming of initially programmed floating gates via prompt charge loss produced by an ionizing radiation environment. The environment can be a mixture of electrons, protons, and heavy ions. The model requires several input parameters. This paper extends the model to include TID effects in the control circuitry by including one additional parameter. Parameters intended to produce conservative risk estimates for the Samsung 8 Gb SLC NAND flash memory are given, subject to some qualifications.

  17. Coherent imaging at FLASH

    International Nuclear Information System (INIS)

    Chapman, H N; Bajt, S; Duesterer, S; Treusch, R; Barty, A; Benner, W H; Bogan, M J; Frank, M; Hau-Riege, S P; Woods, B W; Boutet, S; Cavalleri, A; Hajdu, J; Iwan, B; Seibert, M M; Timneanu, N; Marchesini, S; Sakdinawat, A; Sokolowski-Tinten, K

    2009-01-01

    We have carried out high-resolution single-pulse coherent diffractive imaging at the FLASH free-electron laser. The intense focused FEL pulse gives a high-resolution low-noise coherent diffraction pattern of an object before that object turns into a plasma and explodes. In particular we are developing imaging of biological specimens beyond conventional radiation damage resolution limits, developing imaging of ultrafast processes, and testing methods to characterize and perform single-particle imaging.

  18. Quick Guide to Flash Catalyst

    CERN Document Server

    Elmansy, Rafiq

    2011-01-01

    How do you transform user interface designs created in Photoshop or Illustrator into interactive web pages? It's easier than you think. This guide shows you how to use Adobe Flash Catalyst to create interactive UIs and website wireframes for Rich Internet Applications-without writing a single line of code. Ideal for web designers, this book introduces Flash Catalyst basics with detailed step-by-step instructions and screenshots that illustrate every part of the process. You'll learn hands-on how to turn your static design or artwork into working user interfaces that can be implemented in Fla

  19. Short-term heat load forecasting for single family houses

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Nielsen, Henrik Aalborg

    2013-01-01

    This paper presents a method for forecasting the load for space heating in a single-family house. The forecasting model is built using data from sixteen houses located in Sønderborg, Denmark, combined with local climate measurements and weather forecasts. Every hour the hourly heat load for each...... house the following two days is forecasted. The forecast models are adaptive linear time-series models and the climate inputs used are: ambient temperature, global radiation and wind speed. A computationally efficient recursive least squares scheme is used. The models are optimized to fit the individual...

  20. Short term memory for single surface features and bindings in ageing: A replication study.

    Science.gov (United States)

    Isella, Valeria; Molteni, Federica; Mapelli, Cristina; Ferrarese, Carlo

    2015-06-01

    In the present study we replicated a previous experiment investigating visuo-spatial short term memory binding in young and older healthy individuals, in the attempt to verify the pattern of impairment that can be observed in normal elderly for short term memory for single items vs short term memory for bindings. Assessing a larger sample size (25 young and 25 older subjects), using a more appropriate measure of accuracy for a change detection task (A'), and adding the evaluation of speed of performance, we confirmed that old normals show a decline in short term memory for bindings of shape and colour that is of comparable extent, and not major, to the decline in memory for single shapes and single colours. The absence of a specific deficit of short term memory for conjunctions of surface features seems to distinguish cognitive ageing from Alzheimer's Disease. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. DIRCM FLASH Flight Tests

    National Research Council Canada - National Science Library

    Molocher, Bernhard; Kaltenecker, Anton; Thum-Jaeger, Andrea; Regensburger, Martin; Formery, Martin

    2005-01-01

    .... FLASH operation is as follows: After handover following an alarm from the missile warning system FLASH enters autonomous passive tracking mode for tracking a missiles and sending a laser beam onto the missile...

  2. Flash X-ray

    International Nuclear Information System (INIS)

    Sato, Eiichi

    2003-01-01

    Generation of quasi-monochromatic X-ray by production of weakly ionized line plasma (flash X-ray), high-speed imaging by the X-ray and high-contrast imaging by the characteristic X-ray absorption are described. The equipment for the X-ray is consisted from the high-voltage power supply and condenser, turbo molecular pump, and plasma X-ray tube. The tube has a long linear anticathode to produce the line plasma and flash X-ray at 20 kA current at maximum. X-ray spectrum is measured by the imaging plate equipped in the computed radiography system after diffracted by a LiF single crystal bender. Cu anticathode generates sharp peaks of K X-ray series. The tissue images are presented for vertebra, rabbit ear and heart, and dog heart by X-ray fluoroscopy with Ce anticathode. Generation of K-orbit characteristic X-ray with extremely low bremsstrahung is to be attempted for medical use. (N.I.)

  3. The Power of Flash Mob Research: Conducting a Nationwide Observational Clinical Study on Capillary Refill Time in a Single Day.

    Science.gov (United States)

    Alsma, Jelmer; van Saase, Jan L C M; Nanayakkara, Prabath W B; Schouten, W E M Ineke; Baten, Anique; Bauer, Martijn P; Holleman, Frits; Ligtenberg, Jack J M; Stassen, Patricia M; Kaasjager, Karin H A H; Haak, Harm R; Bosch, Frank H; Schuit, Stephanie C E

    2017-05-01

    Capillary refill time (CRT) is a clinical test used to evaluate the circulatory status of patients; various methods are available to assess CRT. Conventional clinical research often demands large numbers of patients, making it costly, labor-intensive, and time-consuming. We studied the interobserver agreement on CRT in a nationwide study by using a novel method of research called flash mob research (FMR). Physicians in the Netherlands were recruited by using word-of-mouth referrals, conventional media, and social media to participate in a nationwide, single-day, "nine-to-five," multicenter, cross-sectional, observational study to evaluate CRT. Patients aged ≥ 18 years presenting to the ED or who were hospitalized were eligible for inclusion. CRT was measured independently (by two investigators) at the patient's sternum and distal phalanx after application of pressure for 5 s (5s) and 15 s (15s). On October 29, 2014, a total of 458 investigators in 38 Dutch hospitals enrolled 1,734 patients. The mean CRT measured at the distal phalanx were 2.3 s (5s, SD 1.1) and 2.4 s (15s, SD 1.3). The mean CRT measured at the sternum was 2.6 s (5s, SD 1.1) and 2.7 s (15s, SD 1.1). Interobserver agreement was higher for the distal phalanx (κ value, 0.40) than for the sternum (κ value, 0.30). Interobserver agreement on CRT is, at best, moderate. CRT measured at the distal phalanx yielded higher interobserver agreement compared with sternal CRT measurements. FMR proved a valuable instrument to investigate a relatively simple clinical question in an inexpensive, quick, and reliable manner. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  4. Accumulation and detoxication responses of the gastropod Lymnaea stagnalis to single and combined exposures to natural (cyanobacteria) and anthropogenic (the herbicide RoundUp® Flash) stressors

    DEFF Research Database (Denmark)

    Lance, Emilie; Desprat, J.; Holbech, B. F.

    2016-01-01

    , and ii) activities of anti-oxidant (catalase CAT) and biotransformation (glutathione-S-transferase GST) enzymes. During the intoxication, the cyanobacterial exposure induced an early increase of CAT activity, independently of the MC content, probably related to the production of secondary cyanobacterial...... metabolites. The GST activity was induced by RoundUp® Flash alone or in combination with non MC-producing cyanobacteria, but was inhibited by MC-producing cyanobacteria with or without RoundUp® Flash. Moreover, MC accumulation in L. stagnalis was 3.2 times increased when snails were concomitantly exposed...... to MC-producing cyanobacteria with RoundUp®, suggesting interacting effects of MCs on biotransformation processes. The potent inhibition of detoxication systems by MCs and RoundUp® Flash was reversible during the depuration, during which CAT and GST activities were significantly higher in snails...

  5. Early complications and short-term failures of zirconia single crowns and partial fixed dental prostheses.

    Science.gov (United States)

    Pihlaja, Juha; Näpänkangas, Ritva; Raustia, Aune

    2014-10-01

    Ceramic single crowns fabricated from newer materials, especially zirconia, have shown relatively high survival rates. However, early reversible complications may increase the risk of an irreversible failure later. The purpose of the study was to evaluate the early complications and short-term failures of zirconia single crowns and partial fixed dental prostheses (FDPs) made by predoctoral dental students. Data were collected from the patient records. Altogether, 264 zirconia single crowns and 120 FDPs (342 abutments and 190 pontics) were fabricated for 173 patients between 2007 and 2010. Early complications were recorded during the prosthetic treatment phase, and short-term failures were recorded during the first year in use. The most frequent early complications were localized gingival irritation (1.9% of single crowns and 2.5% of FDP) and postoperative tooth sensitivity (0.4% of single crowns and 3.3% of FDPs). Pulp exposure during preparation was recorded in 3 abutment teeth of the FDPs. The most frequent short-term failure was chipping of the veneering porcelain (0.8% for single crowns, 0.8% for FDPs). One crown lost cementation because of poor retention (0.4%), and 2 FDPs failed because of framework fractures (1.7%). The most frequent early complications were localized gingival irritation and postoperative tooth sensitivity, and the most frequent short-term failure was chipping of the veneering porcelain. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  6. NAND flash memory technologies

    CERN Document Server

    Aritome, Seiichi

    2016-01-01

    This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

  7. Accumulation and detoxication responses of the gastropod Lymnaea stagnalis to single and combined exposures to natural (cyanobacteria) and anthropogenic (the herbicide RoundUp(®) Flash) stressors.

    Science.gov (United States)

    Lance, Emilie; Desprat, Julia; Holbech, Bente Frost; Gérard, Claudia; Bormans, Myriam; Lawton, Linda A; Edwards, Christine; Wiegand, Claudia

    2016-08-01

    Freshwater gastropods are increasingly exposed to multiple stressors in the field such as the herbicide glyphosate in Roundup formulations and cyanobacterial blooms either producing or not producing microcystins (MCs), potentially leading to interacting effects. Here, the responses of Lymnaea stagnalis to a 21-day exposure to non-MC or MC-producing (33μgL(-1)) Planktothrix agardhii alone or in combination with the commercial formulation RoundUp(®) Flash at a concentration of 1μgL(-1) glyphosate, followed by 14days of depuration, were studied via i) accumulation of free and bound MCs in tissues, and ii) activities of anti-oxidant (catalase CAT) and biotransformation (glutathione-S-transferase GST) enzymes. During the intoxication, the cyanobacterial exposure induced an early increase of CAT activity, independently of the MC content, probably related to the production of secondary cyanobacterial metabolites. The GST activity was induced by RoundUp(®) Flash alone or in combination with non MC-producing cyanobacteria, but was inhibited by MC-producing cyanobacteria with or without RoundUp(®) Flash. Moreover, MC accumulation in L. stagnalis was 3.2 times increased when snails were concomitantly exposed to MC-producing cyanobacteria with RoundUp(®), suggesting interacting effects of MCs on biotransformation processes. The potent inhibition of detoxication systems by MCs and RoundUp(®) Flash was reversible during the depuration, during which CAT and GST activities were significantly higher in snails previously exposed to MC-producing cyanobacteria with or without RoundUp(®) Flash than in other conditions, probably related to the oxidative stress caused by accumulated MCs remaining in tissues. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Short Peptides Enhance Single Cell Adhesion and Viability onMicroarrays

    Energy Technology Data Exchange (ETDEWEB)

    Veiseh, Mandana; Veiseh, Omid; Martin, Michael C.; Asphahani,Fareid; Zhang, Miqin

    2007-01-19

    Single cell patterning holds important implications forbiology, biochemistry, biotechnology, medicine, and bioinformatics. Thechallenge for single cell patterning is to produce small islands hostingonly single cells and retaining their viability for a prolonged period oftime. This study demonstrated a surface engineering approach that uses acovalently bound short peptide as a mediator to pattern cells withimproved single cell adhesion and prolonged cellular viabilityon goldpatterned SiO2 substrates. The underlying hypothesis is that celladhesion is regulated bythe type, availability, and stability ofeffective cell adhesion peptides, and thus covalently bound shortpeptides would promote cell spreading and, thus, single cell adhesion andviability. The effectiveness of this approach and the underlyingmechanism for the increased probability of single cell adhesion andprolonged cell viability by short peptides were studied by comparingcellular behavior of human umbilical cord vein endothelial cells on threemodelsurfaces whose gold electrodes were immobilized with fibronectin,physically adsorbed Arg-Glu-Asp-Val-Tyr, and covalently boundLys-Arg-Glu-Asp-Val-Tyr, respectively. The surface chemistry and bindingproperties were characterized by reflectance Fourier transform infraredspectroscopy. Both short peptides were superior to fibronectin inproducing adhesion of only single cells, whereas the covalently boundpeptide also reduced apoptosis and necrosisof adhered cells. Controllingcell spreading by peptide binding domains to regulate apoptosis andviability represents a fundamental mechanism in cell-materialsinteraction and provides an effective strategy in engineering arrays ofsingle cells.

  9. Pro Android Flash

    CERN Document Server

    Chin, Stephen; Campesato, Oswald

    2011-01-01

    Did you know you can take your Flash skills beyond the browser, allowing you to make apps for Android, iOS and the BlackBerry Tablet OS? Build dynamic apps today starting with the easy-to-use Android smartphones and tablets. Then, take your app to other platforms without writing native code. Pro Android Flash is the definitive guide to building Flash and other rich Internet applications (RIAs) on the Android platform. It covers the most popular RIA frameworks for Android developers - Flash and Flex - and shows how to build rich, immersive user experiences on both Android smartphones and tablet

  10. Two-color monochromatic x-ray imaging with a single short-pulse laser

    Science.gov (United States)

    Sawada, H.; Daykin, T.; McLean, H. S.; Chen, H.; Patel, P. K.; Ping, Y.; Pérez, F.

    2017-06-01

    Simultaneous monochromatic crystal imaging at 4.5 and 8.0 keV with x-rays produced by a single short-pulse laser is presented. A layered target consisting of thin foils of titanium and copper glued together is irradiated by the 50 TW Leopard short-pulse laser housed at the Nevada Terawatt Facility. Laser-accelerated MeV fast electrons transmitting through the target induce Kα fluorescence from both foils. Two energy-selective curved crystals in the imaging diagnostic form separate monochromatic images on a single imaging detector. The experiment demonstrates simultaneous two-color monochromatic imaging of the foils on a single detector as well as Kα x-ray production at two different photon energies with a single laser beam. Application of the diagnostic technique to x-ray radiography of a high density plasma is also presented.

  11. Technique and Short-Term Outcomes of Single-Port Surgery for Rectal Cancer

    DEFF Research Database (Denmark)

    Bulut, O; Aslak, K K; Rosenstock, S

    2013-01-01

    Although conventional laparoscopic surgery is less traumatic than open surgery, it does cause tissue trauma and multiple scar formation. The size and number of ports determine the extent of the trauma. Single-port laparoscopic surgery is assumed to minimize and perhaps eliminate the potential adv...... adverse effects of conventional laparoscopy. The aim of this study was to examine short-term outcomes of single-port laparoscopic surgery for rectal cancer....

  12. Experience with FreeStyle Libre Flash glucose monitoring system in management of refractory dumping syndrome in pregnancy shortly after bariatric surgery.

    Science.gov (United States)

    Novodvorsky, Peter; Walkinshaw, Emma; Rahman, Waliur; Gordon, Valerie; Towse, Karen; Mitchell, Sarah; Selvarajah, Dinesh; Madhuvrata, Priya; Munir, Alia

    2017-01-01

    procedures, many of which are women of childbearing age.Fertility generally improves after bariatric surgery due to weight reduction, but pregnancy is not recommended for at least 12-24 months after surgery. If pregnancy occurs, there are currently little evidence-based guidelines available on how to manage complications such as dumping syndromes or gestational diabetes (GDM) in women with history of bariatric surgery.Diagnosis of GDM relies on the use of a 75 g oral glucose tolerance test (OGTT). The use of this test in pregnant women is not recommended due to its potential to precipitate dumping syndrome. Capillary glucose monitoring profiles or continuous glucose monitoring (CGM) is being currently discussed as alternative testing modalities.As the CGM technology becomes more available, including the recently introduced FreeStyle Libre Flash glucose monitoring system, more pregnant women, including those after bariatric surgery, will have access to this technology. We suggest urgent development of guidelines regarding the use of CGM and flash glucose monitoring tools in these circumstances and in the interim recommend careful consideration of their use on a case-to-case basis.

  13. Flash-Type Discrimination

    Science.gov (United States)

    Koshak, William J.

    2010-01-01

    This viewgraph presentation describes the significant progress made in the flash-type discrimination algorithm development. The contents include: 1) Highlights of Progress for GLM-R3 Flash-Type discrimination Algorithm Development; 2) Maximum Group Area (MGA) Data; 3) Retrieval Errors from Simulations; and 4) Preliminary Global-scale Retrieval.

  14. Kinematic MRI using short TR single shot fast spin echo (SSFSE) in evaluating swallowing

    International Nuclear Information System (INIS)

    Isogai, Satoshi; Takehara, Yasuo; Isoda, Haruo; Kodaira, Nami; Masunaga, Hatsuko; Ozawa, Fukujirou; Kaneko, Masao; Nozaki, Atsushi; Kabasawa, Hiroyuki

    1999-01-01

    The utility of short TR single shot fast spin echo (SSFSE) MR imaging for evaluating swallowing was determined. Five healthy volunteers underwent kinematic MR imaging of swallowing with a 1.5 T MR scanner using the short TR (300 ms) SSFSE sequence. Twenty phases of sagittal sections were acquired within 6 sec, where the temporal resolution was 300 ms. For oral contrast medium, we used prune yogurt juice with Fe added. The image contrast of short TR SSFSE was found to be somewhere like that of T1-weighted images. In all cases, both the buccal and pharyngeal stages of swallowing were successfully depicted. The Fe-added prune yogurt juice performed as a positive contrast medium and helped determine anatomical structures in the buccal stage. Short TR (300 ms) SSFSE was useful in evaluating swallowing. The combined use of Fe-added prune yogurt juice was helpful in enhancing the surface of the oropharynx. (author)

  15. The flash grab effect.

    Science.gov (United States)

    Cavanagh, Patrick; Anstis, Stuart

    2013-10-18

    When an object moves back and forth, its trajectory appears significantly shorter than it actually is. The object appears to stop and reverse well before its actual reversal point, as if there is some averaging of location within a window of about 100 ms (Sinico et al., 2009). Surprisingly, if a bar is flashed at the physical end point of the trajectory, right on top of the object, just as it reverses direction, the flash is also shifted - grabbed by the object - and is seen at the perceived endpoint of the trajectory rather than the physical endpoint. This can shift the perceived location of the flash by as much as 2 or 3 times its physical size and by up to several degrees of visual angle. We first show that the position shift of the flash is generated by the trajectory shortening, as the same shift is seen with or without the flash. The flash itself is only grabbed if it is presented within a small spatiotemporal attraction zone around the physical end point of the trajectory. Any flash falling in that zone is pulled toward the perceived endpoint. The effect scales linearly with speed, up to a maximum, and is independent of the contrast of the moving stimulus once it is above 5%. Finally, we demonstrate that this position shift requires attention. These results reveal a new "flash grab" effect in the family of motion-induced position shifts. Although it most resembles the flash drag effect, it differs from this in the following ways: (1) it has a different temporal profile, (2) it requires attention, (3) it is about 10 times larger. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Effects of ageing on single muscle fibre contractile function following short-term immobilisation

    DEFF Research Database (Denmark)

    Hvid, Lars G; Ørtenblad, Niels; Aagaard, Per

    2011-01-01

    Very little attention has been given to the combined effect of healthy ageing and short-term disuse on the contractile function of human single muscle fibres. Therefore, the present study investigated the effects of 2 weeks of lower limb cast immobilisation (i.e. disuse) on selected contractile...... properties of single muscle fibres (n=378) from vastus lateralis of 9 young (24 ± 1 years) and 8 old (67 ± 2 years) healthy men with comparable levels of physical activity. Prior to immobilisation, MHC IIa fibres produced higher maximum Ca2+-activated force (approx. 32%) and specific force (approx. 33......%) and had lower Ca2+ sensitivity than MHC I fibres (p...

  17. Partial Shading Detection in Solar System Using Single Short Pulse of Load

    Directory of Open Access Journals (Sweden)

    Bartczak Mateusz

    2017-03-01

    Full Text Available A single photovoltaic panel under uniform illumination has only one global maximum power point, but the same panel in irregularly illuminated conditions can have more maxima on its power-voltage curve. The irregularly illuminated conditions in most cases are results of partial shading. In the work a single short pulse of load is used to extract information about partial shading. This information can be useful and can help to make some improvements in existing MPPT algorithms. In the paper the intrinsic capacitance of a photovoltaic system is used to retrieve occurrence of partial shading.

  18. Short-range energy budget simulator of single photon lidar demonstrator

    Science.gov (United States)

    Murtazin, Mark V.; Prochazka, Ivan; Blazej, Josef; Pershin, Sergey M.; Lednev, Vasily N.

    2017-05-01

    The compact single photon lidar demonstrator dedicated for asteroid rendezvous missions has been designed and realized in our laboratory two years ago. The instrument provides crucial data on altitude and terrain profile for altitudes exceeding 5 km with a precision of less than 10 cm fulfilling the Rayleigh criterion. One of the calibration procedure of demonstrator is the positioning of receiver and transmitter optics related to detector and laser and the aligning of transmitter and receiver optical common paths. To improve this particular indoor calibration procedure the new simulator of single photon energy budget during short range operation has been created. The comparison of simulated and experimental data will be presented and discussed.

  19. Short (

    NARCIS (Netherlands)

    Telleman, Gerdien; den Hartog, Laurens

    2013-01-01

    Aim: This systematic review assessed the implant survival rate of short (<10 mm) dental implants installed in partially edentulous patients. A case report of a short implant in the posterior region have been added. Materials and methods: A search was conducted in the electronic databases of MEDLINE

  20. Floods and Flash Flooding

    Science.gov (United States)

    Floods and flash flooding Now is the time to determine your area’s flood risk. If you are not sure whether you ... If you are in a floodplain, consider buying flood insurance. Do not drive around barricades. If your ...

  1. Photosynthetic efficiency of Chlamydomonas reinhardtii in flashing light

    NARCIS (Netherlands)

    Vejrazka, C.; Janssen, M.G.J.; Streefland, M.; Wijffels, R.H.

    2011-01-01

    Efficient light to biomass conversion in photobioreactors is crucial for economically feasible microalgae production processes. It has been suggested that photosynthesis is enhanced in short light path photobioreactors by mixing-induced flashing light regimes. In this study, photosynthetic

  2. Sub-second photonic processing of solution-deposited single layer and heterojunction metal oxide thin-film transistors using a high-power xenon flash lamp

    KAUST Repository

    Tetzner, Kornelius

    2017-11-01

    We report the fabrication of solution-processed In2O3 and In2O3/ZnO heterojunction thin-film transistors (TFTs) where the precursor materials were converted to their semiconducting state using high power light pulses generated by a xenon flash lamp. In2O3 TFTs prepared on glass substrates exhibited low-voltage operation (≤2 V) and a high electron mobility of ∼6 cm2 V−1 s−1. By replacing the In2O3 layer with a photonically processed In2O3/ZnO heterojunction, we were able to increase the electron mobility to 36 cm2 V−1 s−1, while maintaining the low-voltage operation. Although the level of performance achieved in these devices is comparable to control TFTs fabricated via thermal annealing at 250 °C for 1 h, the photonic treatment approach adopted here is extremely rapid with a processing time of less than 18 s per layer. With the aid of a numerical model we were able to analyse the temperature profile within the metal oxide layer(s) upon flashing revealing a remarkable increase of the layer\\'s surface temperature to ∼1000 °C within ∼1 ms. Despite this, the backside of the glass substrate remains unchanged and close to room temperature. Our results highlight the applicability of the method for the facile manufacturing of high performance metal oxide transistors on inexpensive large-area substrates.

  3. Coding for flash memories

    OpenAIRE

    Yaakobi, Eitan

    2011-01-01

    Flash memories are, by far, the most important type of non -volatile memory in use today. They are employed widely in mobile, embedded, and mass-storage applications, and the growth in this sector continues at a staggering pace. Moreover, since flash memories do not suffer from the mechanical limitations of magnetic disk drives, solid- state drives have the potential to upstage the magnetic recording industry in the foreseeable future. The research goal of this dissertation is the discovery o...

  4. Inserting a Flash movie into a PowerPoint presentation.

    Science.gov (United States)

    Elfarssi, Saïd

    2007-02-01

    Macromedia Flash is a multimedia authoring software that is used to create dynamic presentations for the World Wide Web. Flash allows you to mix sound, animation, and graphics into a single file that can be added to a PowerPoint presentation for dynamic effect.

  5. Fast Resonance Raman Spectroscopy of Short-Lived Radicals

    DEFF Research Database (Denmark)

    Pagsberg, Palle Bjørn; Wilbrandt, Robert Walter; Hansen, Karina Benthin

    1976-01-01

    We report the first application of pulsed resonance Raman spectroscopy to the study of short-lived free radicals produced by pulse radiolysis. A single pulse from a flash-lamp pumped tunable dye laser is used to excite the resonance Raman spectrum of the p-terphenyl anion radical with an initial...

  6. Effects of ageing on single muscle fibre contractile function following short-term immobilisation

    DEFF Research Database (Denmark)

    Hvid, Lars G; Ortenblad, Niels; Aagaard, Per

    2011-01-01

    Very little attention has been given to the combined effects of healthy ageing and short-term disuse on the contractile function of human single muscle fibres. Therefore, the present study investigated the effects of 2 weeks of lower limb cast immobilisation (i.e. disuse) on selected contractile.......05), respectively. In conclusion, 2 weeks of lower limb immobilisation caused greater impairments in single muscle fibre force and specific force in MHC IIa than MHC I fibres independently of age. In contrast, immobilisation-induced changes in Ca(2+) sensitivity that were dependent on age and MHC isoform....... properties of single muscle fibres (n = 378) from vastus lateralis of nine young (24 ± 1 years) and eight old (67 ± 2 years) healthy men with comparable levels of physical activity. Prior to immobilisation, MHC IIa fibres produced higher maximum Ca(2+)-activated force (approx. 32%) and specific force (approx...

  7. A single session of exercise as a modulator of short-term learning in healthy individuals.

    Science.gov (United States)

    Sage, Michael D; Beyer, Kit B; Laylor, Mark; Liang, Carmen; Roy, Eric A; McIlroy, William E

    2016-08-26

    A single session of aerobic exercise is linked to faster motor responses; however, the effect on rate of short-term learning is less clear. The objective was to evaluate the influence of a single bout of aerobic exercise on the rate of short-term acquisition of a shape-letter association task requiring a motor response. 23 [11 females, age 20.8±2.7years] healthy young adults were evaluated using a randomly assigned crossover design which was counterbalanced for order before and after moderate (exercise) and light (control) intensity cycle ergometry. Participants performed 3 blocks, with each block consisting of one round of training and testing. During training, participants were tasked with learning 6 unique shape-letter associations. Subsequent testing required a key press response to a visually presented shape pattern. Response time and error rates were used to assess acquisition over the 3 blocks of testing. Mean response time was faster post-exercise relative to the other testing periods, and approached statistical significance compared to post-control (pexercise and control conditions). Error rate reduction (test block 1 minus test block 3) revealed that individuals had the smallest change in error rate post-exercise (pexercise which approached statistical significance (p=0.06) suggesting near-perfect error rates were obtained after only 2 testing blocks post-exercise compared to 3 blocks in the other testing periods. Support for augmentation of short-term learning was mixed as errors were reduced post-exercise while response time was not different between evaluations. Future work should include neurophysiological evaluation and a retention test to better elucidate the influence of aerobic exercise on rate of short-term learning. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. Professional Flash Lite Mobile Development

    CERN Document Server

    Anderson, J G

    2010-01-01

    Discover how to create Flash Lite mobile apps from the ground up. Adobe Flash is an ideal choice for developing rich interactive content for "Flash-enabled" mobile devices; and with this book, you'll learn how to create unique applications with Flash Lite. Through a series of code samples and extensive example applications, you'll explore the core concepts, key features, and best practices of the Flash Lite player. Coverage reveals various ways to develop Flash mobile content, create applications with a cross-platform programming framework based on the Model, View and Controller conc

  9. Changes in brain tissue and behavior patterns induced by single short-term fasting in mice.

    Directory of Open Access Journals (Sweden)

    Yuko Hisatomi

    Full Text Available In humans, emaciation from long-term dietary deficiencies, such as anorexia, reportedly increases physical activity and brain atrophy. However, the effects of single short-term fasting on brain tissue or behavioral activity patterns remain unclear. To clarify the impact of malnutrition on brain function, we conducted a single short-term fasting study as an anorexia model using male adult mice and determined if changes occurred in migratory behavior as an expression of brain function and in brain tissue structure. Sixteen-week-old C57BL/6J male mice were divided into either the fasted group or the control group. Experiments were conducted in a fixed indoor environment. We examined the effects of fasting on the number of nerve cells, structural changes in the myelin and axon density, and brain atrophy. For behavior observation, the amount of food and water consumed, ingestion time, and the pattern of movement were measured using a time-recording system. The fasted mice showed a significant increase in physical activity and their rhythm of movement was disturbed. Since the brain was in an abnormal state after fasting, mice that were normally active during the night became active regardless of day or night and performed strenuous exercise at a high frequency. The brain weight did not change by a fast, and brain atrophy was not observed. Although no textural change was apparent by fasting, the neuronal neogenesis in the subventricular zone and hippocampus was inhibited, causing disorder of the brain function. A clear association between the suppression of encephalic neuropoiesis and overactivity was not established. However, it is interesting that the results of this study suggest that single short-term fasting has an effect on encephalic neuropoiesis.

  10. Changes in brain tissue and behavior patterns induced by single short-term fasting in mice.

    Science.gov (United States)

    Hisatomi, Yuko; Asakura, Kyo; Kugino, Kenji; Kurokawa, Mamoru; Asakura, Tomiko; Nakata, Keiko

    2013-01-01

    In humans, emaciation from long-term dietary deficiencies, such as anorexia, reportedly increases physical activity and brain atrophy. However, the effects of single short-term fasting on brain tissue or behavioral activity patterns remain unclear. To clarify the impact of malnutrition on brain function, we conducted a single short-term fasting study as an anorexia model using male adult mice and determined if changes occurred in migratory behavior as an expression of brain function and in brain tissue structure. Sixteen-week-old C57BL/6J male mice were divided into either the fasted group or the control group. Experiments were conducted in a fixed indoor environment. We examined the effects of fasting on the number of nerve cells, structural changes in the myelin and axon density, and brain atrophy. For behavior observation, the amount of food and water consumed, ingestion time, and the pattern of movement were measured using a time-recording system. The fasted mice showed a significant increase in physical activity and their rhythm of movement was disturbed. Since the brain was in an abnormal state after fasting, mice that were normally active during the night became active regardless of day or night and performed strenuous exercise at a high frequency. The brain weight did not change by a fast, and brain atrophy was not observed. Although no textural change was apparent by fasting, the neuronal neogenesis in the subventricular zone and hippocampus was inhibited, causing disorder of the brain function. A clear association between the suppression of encephalic neuropoiesis and overactivity was not established. However, it is interesting that the results of this study suggest that single short-term fasting has an effect on encephalic neuropoiesis.

  11. Perioperative and short-term oncological outcomes of single-port surgery for transverse colon cancer.

    Science.gov (United States)

    Tei, Mitsuyoshi; Suzuki, Yozo; Wakasugi, Masaki; Akamatsu, Hiroki

    2017-06-01

    To compare the perioperative and short-term oncological outcomes of patients who underwent single-port surgery (SPS) with those of patients who underwent multi-port surgery (MPS) for transverse colon cancer. The records of consecutive patients who underwent SPS (n = 75) or MPS (n = 41) for transverse colon cancer in our department between January, 2008 and December, 2015 were analyzed retrospectively. Operative times were significantly shorter in the SPS group than in the MPS group (185 vs. 195 min, respectively; P = 0.043). There were no significant differences in operative procedures, blood loss, or extent of lymph node dissection. The rate of postoperative complications was similar in both groups, but the length of hospital stay was significantly shorter in the single-port group than in the multi-port group (8 vs. 11 days, respectively; P transverse colon cancer.

  12. General review of flashing jet studies.

    Science.gov (United States)

    Polanco, Geanette; Holdø, Arne Erik; Munday, George

    2010-01-15

    The major concern on the management of superheated liquids, in industrial environments, is the large potential hazards involved in cases of any accidental release. There is a possibility that a violent phase change could take place inside the fluid released generating a flashing jet. This violent phase change might produce catastrophic consequences, such as explosions, fires or toxic exposure, in the installations and in the surroundings. The knowledge and understanding of the mechanisms involved in those releases become an important issue in the prevention of these consequences and the minimization of their impact. This work presents a comprehensive review of information about flashing processes. The review begins with a description of the single phase jet followed by a description of the two-phase flashing jet. The concepts and implications of the thermodynamic and mechanical effects on the behaviour of the jets are considered at the beginning of the review. Following the review is devoted to the classification of the different study approaches used to understand flashing processes in the past, highlighting various critical parameters on the behaviour and the hazard consequences of flashing jets. The review also contains an extensive compilation of experimental, theoretical and numerical data relating to these phenomena, which includes information on the distinct characteristics of the jet, since type of jet, velocity distribution, expansion angle and mass phase change all require individual estimation.

  13. Foundation Flash Cartoon Animation

    CERN Document Server

    Jones, Tim; Rosson, Allan S

    2008-01-01

    One of Flash s most common uses is still animation for cartoons, games, advertising etc, and this book takes a fresh look at the topic, breaking it down pre-production, production, and post production, and looking at each section in detail, and covering topics such as storyboarding, character libraries and camera mechanics like no Flash book has before. The book is written by members of the Emmy award winning ANIMAX team, who have created work for clients such as Disney, AOL, Fox, WWE, ESPN, and Sesame workshop. This book is an opportunity for them to share their secrets, and is written to sui

  14. Single-Incision Laparoscopic Colectomy for Cancer: Short-Term Outcomes and Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Rodrigo Pedraza

    2013-01-01

    Full Text Available Introduction. Single-incision laparoscopic colectomy (SILC is a viable and safe technique; however, there are no single-institution studies comparing outcomes of SILC for colon cancer with well-established minimally invasive techniques. We evaluated the short-term outcomes following SILC for cancer compared to a group of well-established minimally invasive techniques. Methods. Fifty consecutive patients who underwent SILC for colon cancer were compared to a control group composed of 50 cases of minimally invasive colectomies performed with either conventional multiport or hand-assisted laparoscopic technique. The groups were paired based on the type of procedure. Demographics, intraoperative, and postoperative outcomes were assessed. Results. With the exception of BMI, demographics were similar between both groups. Most of the procedures were right colectomies ( and anterior resections (. There were no significant differences in operative time (127.9 versus 126.7 min, conversions (0 versus 1, complications (14% versus 8%, length of stay (4.5 versus 4.0 days, readmissions (2% versus 2%, and reoperations (2% versus 2%. Oncological outcomes were also similar between groups. Conclusions. SILC is an oncologically sound alternative for the management of colon cancer and results in similar short-term outcomes as compared with well-established minimally invasive techniques.

  15. Space Qualified, Radiation Hardened, Dense Monolithic Flash Memory, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Space Micro proposes to build a radiation hardened by design (RHBD) flash memory, using a modified version of our RH-eDRAM Memory Controller to solve all the single...

  16. Measuring single constructs by single items: Constructing an even shorter version of the “Short Five” personality inventory

    Science.gov (United States)

    Konstabel, Kenn; Lönnqvist, Jan-Erik; Leikas, Sointu; García Velázquez, Regina; Qin, Hiaying; Verkasalo, Markku; Walkowitz, Gari

    2017-01-01

    The aim of this study was to construct a short, 30-item personality questionnaire that would be, in terms of content and meaning of the scores, as comparable as possible with longer, well-established inventories such as NEO PI-R and its clones. To do this, we shortened the formerly constructed 60-item “Short Five” (S5) by half so that each subscale would be represented by a single item. We compared all possibilities of selecting 30 items (preserving balanced keying within each domain of the five-factor model) in terms of correlations with well-established scales, self-peer correlations, and clarity of meaning, and selected an optimal combination for each domain. The resulting shortened questionnaire, XS5, was compared to the original S5 using data from student samples in 6 different countries (Estonia, Finland, UK, Germany, Spain, and China), and a representative Finnish sample. The correlations between XS5 domain scales and their longer counterparts from well-established scales ranged from 0.74 to 0.84; the difference from the equivalent correlations for full version of S5 or from meta-analytic short-term dependability coefficients of NEO PI-R was not large. In terms of prediction of external criteria (emotional experience and self-reported behaviours), there were no important differences between XS5, S5, and the longer well-established scales. Controlling for acquiescence did not improve the prediction of criteria, self-peer correlations, or correlations with longer scales, but it did improve internal reliability and, in some analyses, comparability of the principal component structure. XS5 can be recommended as an economic measure of the five-factor model of personality at the level of domain scales; it has reasonable psychometric properties, fair correlations with longer well-established scales, and it can predict emotional experience and self-reported behaviours no worse than S5. When subscales are essential, we would still recommend using the full version

  17. Measuring single constructs by single items: Constructing an even shorter version of the "Short Five" personality inventory.

    Directory of Open Access Journals (Sweden)

    Kenn Konstabel

    Full Text Available The aim of this study was to construct a short, 30-item personality questionnaire that would be, in terms of content and meaning of the scores, as comparable as possible with longer, well-established inventories such as NEO PI-R and its clones. To do this, we shortened the formerly constructed 60-item "Short Five" (S5 by half so that each subscale would be represented by a single item. We compared all possibilities of selecting 30 items (preserving balanced keying within each domain of the five-factor model in terms of correlations with well-established scales, self-peer correlations, and clarity of meaning, and selected an optimal combination for each domain. The resulting shortened questionnaire, XS5, was compared to the original S5 using data from student samples in 6 different countries (Estonia, Finland, UK, Germany, Spain, and China, and a representative Finnish sample. The correlations between XS5 domain scales and their longer counterparts from well-established scales ranged from 0.74 to 0.84; the difference from the equivalent correlations for full version of S5 or from meta-analytic short-term dependability coefficients of NEO PI-R was not large. In terms of prediction of external criteria (emotional experience and self-reported behaviours, there were no important differences between XS5, S5, and the longer well-established scales. Controlling for acquiescence did not improve the prediction of criteria, self-peer correlations, or correlations with longer scales, but it did improve internal reliability and, in some analyses, comparability of the principal component structure. XS5 can be recommended as an economic measure of the five-factor model of personality at the level of domain scales; it has reasonable psychometric properties, fair correlations with longer well-established scales, and it can predict emotional experience and self-reported behaviours no worse than S5. When subscales are essential, we would still recommend using the

  18. Measuring single constructs by single items: Constructing an even shorter version of the "Short Five" personality inventory.

    Science.gov (United States)

    Konstabel, Kenn; Lönnqvist, Jan-Erik; Leikas, Sointu; García Velázquez, Regina; Qin, Hiaying; Verkasalo, Markku; Walkowitz, Gari

    2017-01-01

    The aim of this study was to construct a short, 30-item personality questionnaire that would be, in terms of content and meaning of the scores, as comparable as possible with longer, well-established inventories such as NEO PI-R and its clones. To do this, we shortened the formerly constructed 60-item "Short Five" (S5) by half so that each subscale would be represented by a single item. We compared all possibilities of selecting 30 items (preserving balanced keying within each domain of the five-factor model) in terms of correlations with well-established scales, self-peer correlations, and clarity of meaning, and selected an optimal combination for each domain. The resulting shortened questionnaire, XS5, was compared to the original S5 using data from student samples in 6 different countries (Estonia, Finland, UK, Germany, Spain, and China), and a representative Finnish sample. The correlations between XS5 domain scales and their longer counterparts from well-established scales ranged from 0.74 to 0.84; the difference from the equivalent correlations for full version of S5 or from meta-analytic short-term dependability coefficients of NEO PI-R was not large. In terms of prediction of external criteria (emotional experience and self-reported behaviours), there were no important differences between XS5, S5, and the longer well-established scales. Controlling for acquiescence did not improve the prediction of criteria, self-peer correlations, or correlations with longer scales, but it did improve internal reliability and, in some analyses, comparability of the principal component structure. XS5 can be recommended as an economic measure of the five-factor model of personality at the level of domain scales; it has reasonable psychometric properties, fair correlations with longer well-established scales, and it can predict emotional experience and self-reported behaviours no worse than S5. When subscales are essential, we would still recommend using the full version of

  19. Learning Flash CS4 Professional

    CERN Document Server

    Shupe, Rich

    2009-01-01

    Learning Flash CS4 Professional offers beginners and intermediate Flash developers a unique introduction to the latest version of Adobe's powerful multimedia application. This easy-to-read book is loaded with full-color examples and hands-on tasks to help you master Flash CS4's new motion editor, integrated 3D system, and character control using the new inverse kinematics bones animation system. No previous Flash experience is necessary.

  20. Assessment of vulnerability to extreme flash floods in design storms.

    Science.gov (United States)

    Kim, Eung Seok; Choi, Hyun Il

    2011-07-01

    There has been an increase in the occurrence of sudden local flooding of great volume and short duration caused by heavy or excessive rainfall intensity over a small area, which presents the greatest potential danger threat to the natural environment, human life, public health and property, etc. Such flash floods have rapid runoff and debris flow that rises quickly with little or no advance warning to prevent flood damage. This study develops a flash flood index through the average of the same scale relative severity factors quantifying characteristics of hydrographs generated from a rainfall-runoff model for the long-term observed rainfall data in a small ungauged study basin, and presents regression equations between rainfall characteristics and the flash flood index. The aim of this study is to develop flash flood index-duration-frequency relation curves by combining the rainfall intensity-duration-frequency relation and the flash flood index from probability rainfall data in order to evaluate vulnerability to extreme flash floods in design storms. This study is an initial effort to quantify the flash flood severity of design storms for both existing and planned flood control facilities to cope with residual flood risks due to extreme flash floods that have ocurred frequently in recent years.

  1. Jaan Toomik Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    1999. a. mai-juuni 'Flash Artis' on ajakirja Eesti korrespondendi Ando Keskküla artikkel Jaan Toomikust. Jaan Toomik on kutsutud esinema Londoni The Photographers' Gallery grupinäitusele, tema videot 'Father and Son' näidatakse Londonis avataval näitusel 'Near and Elsewhere' 11.-24. juunini

  2. Inessa Josing Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    'Flash Art'i' 1998. a. nov.-dets. numbris Rosa Martínezi artiklis suvisest Manifesta II näitusest Luxembourg'is on positiivselt mainitud ka Inessa Josingut. Illustratsiooniks toodud seitsmest fotost ühel on I. Josingu aknakujundus 'What Must I Do to be Saved?'

  3. Flash Builder and Flash Catalyst The New Workflow

    CERN Document Server

    Peeters, Steven

    2010-01-01

    The Flash Platform is changing. Flash Builder and Flash Catalyst have brought a new separation of design and coding to web development that enables a much more efficient and streamlined workflow. For designers and developers used to the close confines of Flash, this is a hugely liberating but at first alien concept. This book teaches you the new workflow for the Flash platform. It gives an overview of the technologies involved and provides you with real-world project examples and best-practice guidelines to get from design to implementation with the tools at hand. * Includes many examples* Foc

  4. Differentiation of Short Single-Stranded DNA Homopolymers in Solid-State Nanopores

    Science.gov (United States)

    Venta, Kimberly; Shemer, Gabriel; Puster, Matthew; Rodríguez-Manzo, Julio A.; Balan, Adrian; Rosenstein, Jacob K.; Shepard, Ken; Drndić, Marija

    2013-01-01

    In the last two decades, new techniques that monitor ionic current modulations as single molecules pass through a nanoscale pore have enabled numerous single-molecule studies. While biological nanopores have recently shown the ability to resolve single nucleotides within individual DNA molecules, similar developments with solid-state nanopores have lagged, due to challenges both in fabricating stable nanopores of similar dimensions as biological nanopores and in achieving sufficiently low-noise and high-bandwidth recordings. Here we show that small silicon nitride nanopores (0.8 to 2-nm-diameter in 5 to 8-nm-thick membranes) can resolve differences between ionic current signals produced by short (30 base) ssDNA homopolymers (poly(dA), poly(dC), poly(dT)), when combined with measurement electronics that allow a signal-to-noise ratio of better than 10 to be achieved at 1 MHz bandwidth. While identifying intramolecular DNA sequences with silicon nitride nanopores will require further improvements in nanopore sensitivity and noise levels, homopolymer differentiation represents an important milestone in the development of solid-state nanopores. PMID:23621759

  5. Ultra-fast flash observatory for detecting the early photons from gamma-ray bursts

    DEFF Research Database (Denmark)

    Lim, H.; Jeong, S.; Ahn, K.-B.

    Gamma-ray bursts (GRBs) are the most luminous transient events with short intense flashes that have been detected in random directions in the sky once or twice per day. Their durations have been measured in seconds, especially short GRBs with duration of <2 sec. The Ultra-Fast Flash Observatory (...

  6. Why Flash Type Matters: A Statistical Analysis

    Science.gov (United States)

    Mecikalski, Retha M.; Bitzer, Phillip M.; Carey, Lawrence D.

    2017-09-01

    While the majority of research only differentiates between intracloud (IC) and cloud-to-ground (CG) flashes, there exists a third flash type, known as hybrid flashes. These flashes have extensive IC components as well as return strokes to ground but are misclassified as CG flashes in current flash type analyses due to the presence of a return stroke. In an effort to show that IC, CG, and hybrid flashes should be separately classified, the two-sample Kolmogorov-Smirnov (KS) test was applied to the flash sizes, flash initiation, and flash propagation altitudes for each of the three flash types. The KS test statistically showed that IC, CG, and hybrid flashes do not have the same parent distributions and thus should be separately classified. Separate classification of hybrid flashes will lead to improved lightning-related research, because unambiguously classified hybrid flashes occur on the same order of magnitude as CG flashes for multicellular storms.

  7. Ghirardi-Rimini-Weber model with massive flashes

    Science.gov (United States)

    Tilloy, Antoine

    2018-01-01

    I introduce a modification of the Ghirardi-Rimini-Weber (GRW) model in which the flashes (or space-time collapse events) source a classical gravitational field. The resulting semiclassical theory of Newtonian gravity preserves the statistical interpretation of quantum states of matter in contrast with mean field approaches. It can be seen as a discrete version of recent proposals of consistent hybrid quantum classical theories. The model is in agreement with known experimental data and introduces new falsifiable predictions: (1) single particles do not self-interact, (2) the 1 /r gravitational potential of Newtonian gravity is cut off at short (≲10-7 m ) distances, and (3) gravity makes spatial superpositions decohere at a rate inversely proportional to that coming from the vanilla GRW model. Together, the last two predictions make the model experimentally falsifiable for all values of its parameters.

  8. Myosin content of single muscle fibers following short-term disuse and active recovery in young and old healthy men

    DEFF Research Database (Denmark)

    Hvid, Lars G; Brocca, Lorenza; Ørtenblad, Niels

    2017-01-01

    Short-term disuse and subsequent recovery affect whole muscle and single myofiber contractile function in young and old. While the loss and recovery of single myofiber specific force (SF) following disuse and rehabilitation has been shown to correlate with alterations in myosin concentrations...

  9. Present State of the Single and Twin Aperture Short Dipole Model Program for the LHC

    CERN Document Server

    Andreyev, N I; Kurtyka, T; Leroy, D; Oberli, L R; Perini, D; Russenschuck, Stephan; Siegel, N; Siemko, A; Tommasini, D; Vanenkov, I; Walckiers, L; Weterings, W

    1998-01-01

    The LHC model program for main dipoles is based on the design, fabrication and testing at CERN of a number of single and twin aperture 1m long magnets. So far, a number of single aperture models, each with specific characteristics, were tested at 2 K at a rate of about one per month. These magnets are the main tool used to check coil performance as a function of design and assembly options in view of optimizing and finalizing choices of components and procedures. Initial quenching field levels of 8.8 T were obtained and the short sample limit of the cable at 1.9 K was reached corresponding to a central bore field of 10 T. A few twin aperture dipole models were also built and tested, using the same structural components as for the long magnets which are now being built in industry. The paper discusses the main characteristics of the models built so far, the instrumentation developed to date and the experience obtained. Finally it describes the plans aimed at continuing a vigorous program to provide input to th...

  10. Physics Flash August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-25

    Physics Flash is the newsletter for the Physics Division at Los Alamos National Laboratory. This newsletter is for August 2016. The following topics are covered: "Accomplishments in the Trident Laser Facility", "David Meyerhofer elected as chair-elect APS Nominating Committee", "HAWC searches for gamma rays from dark matter", "Proton Radiography Facility commissions electromagnetic magnifier", and "Cosmic ray muon computed tomography of spent nuclear fuel in dry storage casks."

  11. The lightning flash

    CERN Document Server

    Cooray, Vernon

    2014-01-01

    With contributions from today's leading lightning engineers and researchers, this updated 2nd edition of Vernon Cooray's classic text, The Lightning Flash provides the reader with an essential introduction to lightning and its impact on electrical and electronic equipment. Providing the reader with a thorough background into almost every aspect of lightning and its impact on electrical and electronic equipment, this new edition is updated throughout and features eight new chapters that bring the science up to date.

  12. Physics Flash December 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). ADEPS Communications

    2016-12-01

    This is the December 2016 issue of Physics Flash, the newsletter of the Physics Division of Los Alamos National Laboratory (LANL). In this issue, the following topics are covered: Novel liquid helium technique to aid highly sensitive search for a neutron electrical dipole moment; Silverleaf: Prototype Red Sage experiments performed at Q-site; John L. Kline named 2016 APS Fellow; Physics students in the news; First Entropy Engine quantum random number generator hits the market; and celebrating service.

  13. Effects of single vs. multiple-set short-term strength training in elderly women.

    Science.gov (United States)

    Radaelli, Regis; Wilhelm, Eurico N; Botton, Cíntia E; Rech, Anderson; Bottaro, Martim; Brown, Lee E; Pinto, Ronei S

    2014-01-01

    The strength training has been shown to be effective for attenuating the age-related physiological decline. However, the adequate volume of strength training volume adequate to promote improvements, mainly during the initial period of training, still remains controversial. Thus, the purpose of this study was to compare the effects of a short-term strength training program with single or multiple sets in elderly women. Maximal dynamic (1-RM) and isometric strength, muscle activation, muscle thickness (MT), and muscle quality (MQ = 1-RM and MT quadriceps quotient) of the knee extensors were assessed. Subjects were randomly assigned into one of two groups: single set (SS; n = 14) that performed one set per exercise or multiple sets (MS; n = 13) that performed three-sets per exercise, twice weekly for 6 weeks. Following training, there were significant increases (p ≤ 0.05) in knee extension 1-RM (16.1 ± 12 % for SS group and 21.7 ± 7.7 % for MS group), in all MT (p ≤ 0.05; vastus lateralis, rectus femoris, vastus medialis, and vastus intermedius), and in MQ (p ≤ 0.05); 15.0 ± 12.2 % for SS group and 12.6 ± 7.2 % for MS group), with no differences between groups. These results suggest that during the initial stages of strength training, single- and multiple-set training demonstrate similar capacity for increasing dynamic strength, MT, and MQ of the knee extensors in elderly women.

  14. A single social defeat induces short-lasting behavioral sensitization to amphetamine.

    Science.gov (United States)

    de Jong, Jelly G; Wasilewski, Michal; van der Vegt, Bea J; Buwalda, Bauke; Koolhaas, Jaap M

    2005-01-17

    Repeated, intermittent exposure to psychostimulants or stressors results in long-lasting, progressive sensitization of the behavioral effects of a subsequent amphetamine (AMPH) challenge. Although behavioral sensitization has also been observed following a single drug pretreatment, the sensitizing potential of a single exposure to stress is not clear. Both drug- and stress-induced sensitization depend on an enhanced dopaminergic neurotransmission in the mesolimbic DA system. Apart from responding to rewards, this system is also involved in responding towards aversive social stimuli. Therefore, social stressors may be particularly effective in inducing cross-sensitization to stimulant drugs. We examined the time course of sensitization to the locomotor effects of the stimulant, AMPH, following a single social stressor: a social defeat. Wistar rats were exposed in a resident-intruder paradigm to an unfamiliar dominant male conspecific (Wild-Type Groningen), resulting in defeat. The locomotor effects of a subsequent AMPH challenge (0.25 or 1.0 mg/kg) were evaluated 3, 14, and 21 days later by scoring horizontal movement in an open field. AMPH had significantly larger locomotor-activating effects in animals that had been defeated 3 days earlier compared to nondefeated controls. However, this sensitized response was no longer present 14 or 21 days after defeat. Therefore, we conclude that social defeat induces short-lasting cross-sensitization to the locomotor effects of AMPH in rats, but is not sufficient for long-term sensitization. The transient enhancement of responses to dopaminergic drugs may be indicative of a temporary role of dopamine in the cascade of physiological and behavioral changes following social defeat.

  15. Electro-optic sampling of THz pulses at the CTR source at FLASH

    International Nuclear Information System (INIS)

    Wunderlich, Steffen

    2012-06-01

    Several applications in material science, non-linear optics and solid-state physics require short pulses with a high pulse energy of radiation in the far-infrared and in the terahertz (THz) regime in particular. As described in the following, coherent transition radiation generated by high-relativistic electron bunches at FLASH provides broadband single-cycle pulses of sub-picosecond length. The pulses are characterized using the quantitative and time-resolved technique of electro-optic sampling showing peak field strengths in the order of 1 MV/cm.

  16. Electro-optic sampling of THz pulses at the CTR source at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wunderlich, Steffen

    2012-06-15

    Several applications in material science, non-linear optics and solid-state physics require short pulses with a high pulse energy of radiation in the far-infrared and in the terahertz (THz) regime in particular. As described in the following, coherent transition radiation generated by high-relativistic electron bunches at FLASH provides broadband single-cycle pulses of sub-picosecond length. The pulses are characterized using the quantitative and time-resolved technique of electro-optic sampling showing peak field strengths in the order of 1 MV/cm.

  17. Short-Term Prospective Clinical Evaluation of Monolithic and Partially Veneered Zirconia Single Crowns.

    Science.gov (United States)

    Bömicke, Wolfgang; Rammelsberg, Peter; Stober, Thomas; Schmitter, Marc

    2017-02-01

    The purpose of this study was to prospectively evaluate the short-term clinical performance and esthetics of monolithic and partially (i.e., facially) veneered zirconia single crowns (MZC and PZC, respectively). Between September 2011 and June 2013, 68 participants received 90 MZCs and 72 PZCs. Clinical study documentation was performed at crown cementation (baseline), at the 6-month follow-up, and then yearly thereafter using standardized report forms. Eight participants with 14 single crowns (eight MZCs and six PZCs) dropped out during clinical follow-up. Thus, 60 participants (28 male, mean age 62.5 ± 13.1 years) fitted with 82 MZCs and 66 PZCs were analyzed in February 2016 (Kaplan-Meier survival; mean observation time for the restorations 35.1 ± 6.3 months). Descriptive statistics were calculated for participants' and dentists' esthetic ratings on a numerical rating scale from 0 to 10 (0 = unacceptable color and shape; 10 = excellent color and shape). Complications were predominantly biological in nature. One PZC was affected by minor chipping. Cumulative 3-year failure-free survival was 98.5% (standard error (SE), 1.5%) for both MZCs and PZCs. Three-year cumulative complication-free survival (success) was 93.6% (SE 2.8%) for MZCs and 95.5% (SE 2.6%) for PZCs. Three-year cumulative fracture-free survival was 100% for MZCs and 98.5% (SE 1.5%) for PZCs. Crowns of both types were awarded high esthetic scores by participants and dentists. Monolithic and partially veneered zirconia crowns can be used clinically with excellent short-term survival and success and without compromising esthetic appearance. Longer-term follow-up is, however, desirable. During the observation time, both monolithic and partially veneered zirconia crowns showed an outstanding low technical complication rate: only one minor chipping and three losses of retention were observed. Additionally, esthetics was excellent. Based on these results the clinical use of this kind of

  18. Pressure drop in flashing flow through obstructions

    International Nuclear Information System (INIS)

    Weinle, M.E.; Johnston, B.S.

    1985-01-01

    An experiment was designed to investigate the pressure drop for flashing flow across obstructions of different geometries at various flow rates. Tests were run using two different orifices to determine if the two-phase pressure drop could be characterized by the single phase loss coefficient and the general behavior of the two-phase multiplier. For the geometries studied, it was possible to correlate the multiplier in a geometry-independent fashion

  19. Effect Of Single And Short-Term Aerobics On Selected Mental State Parametres In Adult Females

    Directory of Open Access Journals (Sweden)

    Kyselovičová Oľga

    2015-11-01

    Full Text Available The aim of the study was to determine the degree of the influence of aerobic program on mental state of the trainees after a single and short-term application. We tried to find out the positive effects of an aerobics on the selected parameters of mental state of women that performed aerobics recreationally. Twenty-two healthy women (age 35 ± 5 years were involved in the specific aerobic program with mini trampolines (jumping over the period of 5 weeks. To measure the psychological parameters a modified questionnaire of type X-STAI was distributed before and after the single work out at the beginning of the study and after the 5 weeks period. Chi-quadrat analysis was used to evaluate the data. The greatest and statistically the most significant differences were recorded in the parameters ´enthusiastic´, ´boosted by energy´ and ´relaxed´, in comparison with the emotions at the beginning and at the end of the lesson in initial measuring. Comparison of changes after the 5 weeks period at the beginning and at the end of the lesson shows statistical significance in all parameters, except ´tired´. No statistical changes occurred at either the beginning or the end of the lesson comparing initial and final phases. Based on the results, we can conclude that specialized aerobic training provokes immediate changes in psychological state of the trainees via increase of their positive and decrease of negative emotions right after the lesson and when compared to its beginning. This leads to a better mental stability and a greater resistance to the influences of outer environment on mental state.

  20. Short-term plasticity and long-term potentiation mimicked in single inorganic synapses

    Science.gov (United States)

    Ohno, Takeo; Hasegawa, Tsuyoshi; Tsuruoka, Tohru; Terabe, Kazuya; Gimzewski, James K.; Aono, Masakazu

    2011-08-01

    Memory is believed to occur in the human brain as a result of two types of synaptic plasticity: short-term plasticity (STP) and long-term potentiation (LTP; refs , , , ). In neuromorphic engineering, emulation of known neural behaviour has proven to be difficult to implement in software because of the highly complex interconnected nature of thought processes. Here we report the discovery of a Ag2S inorganic synapse, which emulates the synaptic functions of both STP and LTP characteristics through the use of input pulse repetition time. The structure known as an atomic switch, operating at critical voltages, stores information as STP with a spontaneous decay of conductance level in response to intermittent input stimuli, whereas frequent stimulation results in a transition to LTP. The Ag2S inorganic synapse has interesting characteristics with analogies to an individual biological synapse, and achieves dynamic memorization in a single device without the need of external preprogramming. A psychological model related to the process of memorizing and forgetting is also demonstrated using the inorganic synapses. Our Ag2S element indicates a breakthrough in mimicking synaptic behaviour essential for the further creation of artificial neural systems that emulate characteristics of human memory.

  1. Flash Platform Examination

    Science.gov (United States)

    2011-03-01

    Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 DRDC Atlantic TM 2008-291 i Abstract...concepts de l’interface utilisateur novateurs. Les applications Flash de diverses fidélités peut intégrer des fonctions de visualisation des données...diverses peuvent intégrer des fonctions de visualisation des données, d’interactivité novatrice, d’animation riche et de diverses

  2. Lengthening of the congenital short femur using the Ilizarov technique: a single-surgeon series.

    Science.gov (United States)

    Aston, W J S; Calder, P R; Baker, D; Hartley, J; Hill, R A

    2009-07-01

    We present a retrospective review of a single-surgeon series of 30 consecutive lengthenings in 27 patients with congenital short femur using the Ilizarov technique performed between 1994 and 2005. The mean increase in length was 5.8 cm/18.65% (3.3 to 10.4, 9.7% to 48.8%), with a mean time in the frame of 223 days (75 to 363). By changing from a distal to a proximal osteotomy for lengthening, the mean range of knee movement was significantly increased from 98.1 degrees to 124.2 degrees (p = 0.041) and there was a trend towards a reduced requirement for quadricepsplasty, although this was not statistically significant (p = 0.07). The overall incidence of regenerate deformation or fracture requiring open reduction and internal fixation was similar in the distal and proximal osteotomy groups (56.7% and 53.8%, respectively). However, in the proximal osteotomy group, pre-placement of a Rush nail reduced this rate from 100% without a nail to 0% with a nail (p < 0.001). When comparing a distal osteotomy with a proximal one over a Rush nail for lengthening, there was a significant decrease in fracture rate from 58.8% to 0% (p = 0.043). We recommend that in this group of patients lengthening of the femur with an Ilizarov construct be carried out through a proximal osteotomy over a Rush nail. Lengthening should also be limited to a maximum of 6 cm during one treatment, or 20% of the original length of the femur, in order to reduce the risk of complications.

  3. Threshold voltage variation depending on single grain boundary and stored charges in an adjacent cell for vertical silicon–oxide–nitride–oxide–silicon NAND flash memory

    Science.gov (United States)

    Oh, Hyeongwan; Kim, Jiwon; Baek, Rock-Hyun; Lee, Jeong-Soo

    2018-04-01

    The effects of single grain boundary (SGB) position and stored electron charges in an adjacent cell in silicon–oxide–nitride–oxide–silicon (SONOS) structures on the variations of threshold voltage (V th) were investigated using technology computer-aided design (TCAD) simulation. As the bit line voltage increases, the SGB position causing the maximum V th variation was shifted from the center to the source side in the channel, owing to the drain-induced grain barrier lowering effect. When the SGB is located in the spacer region, the potential interaction from both the SGB and the stored electron charges in the adjacent cell becomes significant and thus resulting in larger V th variation. In contrast, when the SGB is located at the center of the channel, the peak position of potential barrier is shifted to the center, so that the influence of the adjacent cell is diminished. As the gate length is scaled down to 20 nm, the influence of stored charges in adjacent cells becomes significant, resulting in larger V th variations.

  4. Perturbation of convection-permitting NWP forecasts for flash-flood ensemble forecasting

    Directory of Open Access Journals (Sweden)

    B. Vincendon

    2011-05-01

    Full Text Available Mediterranean intense weather events often lead to devastating flash-floods. Extending the forecasting lead times further than the watershed response times, implies the use of numerical weather prediction (NWP to drive hydrological models. However, the nature of the precipitating events and the temporal and spatial scales of the watershed response make them difficult to forecast, even using a high-resolution convection-permitting NWP deterministic forecasting. This study proposes a new method to sample the uncertainties of high-resolution NWP precipitation forecasts in order to quantify the predictability of the streamflow forecasts. We have developed a perturbation method based on convection-permitting NWP-model error statistics. It produces short-term precipitation ensemble forecasts from single-value meteorological forecasts. These rainfall ensemble forecasts are then fed into a hydrological model dedicated to flash-flood forecasting to produce ensemble streamflow forecasts. The verification on two flash-flood events shows that this forecasting ensemble performs better than the deterministic forecast. The performance of the precipitation perturbation method has also been found to be broadly as good as that obtained using a state-of-the-art research convection-permitting NWP ensemble, while requiring less computing time.

  5. Foraminiferal single chamber analyses of heavy metals as a tool for monitoring permanent and short term anthropogenic footprints.

    Science.gov (United States)

    Titelboim, Danna; Sadekov, Aleksey; Hyams-Kaphzan, Orit; Almogi-Labin, Ahuva; Herut, Barak; Kucera, Michal; Abramovich, Sigal

    2018-03-01

    In order to establish environmentally sustainable industries there is a need for high-resolution temporal and spatial monitoring of heavy metal pollutants even at low concentrations before they become hazardous for local ecosystems. Here we present single chamber records of Cu, Zn and Pb in shells of two benthic foraminifera species with different shell types from two shallow coastal stations in Israel: An area adjacent to an electrical power plant and desalination factory (Hadera) and an industrially free nature reserve (Nachsholim). Records of both foraminifera species show elevated metal concentrations in Hadera clearly identifying the footprint of the local industrial facilities. Moreover, short-term events of elevated Cu and Pb concentrations were detected by single chamber analyses. This study demonstrates the potential of using heavy metals anomalies in foraminiferal single chambers as a tool for detecting the industrial footprint of coastal facilities as well as short term events of elevated heavy metals. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. The Adjoint Method for Gradient-based Dynamic Optimization of UV Flash Processes

    DEFF Research Database (Denmark)

    Ritschel, Tobias Kasper Skovborg; Capolei, Andrea; Jørgensen, John Bagterp

    2017-01-01

    This paper presents a novel single-shooting algorithm for gradient-based solution of optimal control problems with vapor-liquid equilibrium constraints. Dynamic optimization of UV flash processes is relevant in nonlinear model predictive control of distillation columns, certain two-phase flow......-component flash process which demonstrate the importance of the optimization solver, the compiler, and the linear algebra software for the efficiency of dynamic optimization of UV flash processes....

  7. Analyses of Short Channel Effects of Single-Gate and Double-Gate Graphene Nanoribbon Field Effect Transistors

    Directory of Open Access Journals (Sweden)

    Hojjatollah Sarvari

    2016-01-01

    Full Text Available Short channel effects of single-gate and double-gate graphene nanoribbon field effect transistors (GNRFETs are studied based on the atomistic pz orbital model for the Hamiltonian of graphene nanoribbon using the nonequilibrium Green’s function formalism. A tight-binding Hamiltonian with an atomistic pz orbital basis set is used to describe the atomistic details in the channel of the GNRFETs. We have investigated the vital short channel effect parameters such as Ion and Ioff, the threshold voltage, the subthreshold swing, and the drain induced barrier lowering versus the channel length and oxide thickness of the GNRFETs in detail. The gate capacitance and the transconductance of both devices are also computed in order to calculate the intrinsic cut-off frequency and switching delay of GNRFETs. Furthermore, the effects of doping of the channel on the threshold voltage and the frequency response of the double-gate GNRFET are discussed. We have shown that the single-gate GNRFET suffers more from short channel effects if compared with those of the double-gate structure; however, both devices have nearly the same cut-off frequency in the range of terahertz. This work provides a collection of data comparing different features of short channel effects of the single gate with those of the double gate GNRFETs. The results give a very good insight into the devices and are very useful for their digital applications.

  8. Cumulative Success Rate of Short and Ultrashort Implants Supporting Single Crowns in the Posterior Maxilla: A 3-Year Retrospective Study

    Directory of Open Access Journals (Sweden)

    Giorgio Lombardo

    2017-01-01

    Full Text Available Aim. To determine cumulative success rate (CSR of short and ultrashort implants in the posterior maxilla restored with single crowns. Patients and Methods. We performed a retrospective study in 65 patients with 139 implants. 46 were ultrashort and 93 short. Implants were placed with a staged approach and restored with single crowns. Success rate, clinical and radiographic outcomes, and crown-to-implant ratio (CIR were assessed after three years. Statistical analysis was performed by descriptive and inferential statistics. A log-binomial regression model where the main outcome was implant success was achieved. Coefficients and 95% confidence intervals were reported. Analyses were performed with Stata 13.2 for Windows. Results. 61.54% of patients were female and mean overall age was 51.9±11.08 years old. Overall CSR was 97.1% (95% CI: 92.4–98.9: 97.9 and 95.1% for short and ultrashort, respectively (P value: 0.33. Four implants failed. Covariates were not associated with CSR (P value > 0.05. Regression model showed coefficients correlated with implant success for ultrashort implants (0.87 and most of covariates but none were statistically significant (P values > 0.05. Conclusions. Our results suggest that short and ultrashort implants may be successfully placed and restored with single crowns in the resorbed maxillary molar region.

  9. Cumulative Success Rate of Short and Ultrashort Implants Supporting Single Crowns in the Posterior Maxilla: A 3-Year Retrospective Study.

    Science.gov (United States)

    Lombardo, Giorgio; Pighi, Jacopo; Marincola, Mauro; Corrocher, Giovanni; Simancas-Pallares, Miguel; Nocini, Pier Francesco

    2017-01-01

    To determine cumulative success rate (CSR) of short and ultrashort implants in the posterior maxilla restored with single crowns. We performed a retrospective study in 65 patients with 139 implants. 46 were ultrashort and 93 short. Implants were placed with a staged approach and restored with single crowns. Success rate, clinical and radiographic outcomes, and crown-to-implant ratio (CIR) were assessed after three years. Statistical analysis was performed by descriptive and inferential statistics. A log-binomial regression model where the main outcome was implant success was achieved. Coefficients and 95% confidence intervals were reported. Analyses were performed with Stata 13.2 for Windows. 61.54% of patients were female and mean overall age was 51.9 ± 11.08 years old. Overall CSR was 97.1% (95% CI: 92.4-98.9): 97.9 and 95.1% for short and ultrashort, respectively ( P value: 0.33). Four implants failed. Covariates were not associated with CSR ( P value > 0.05). Regression model showed coefficients correlated with implant success for ultrashort implants (0.87) and most of covariates but none were statistically significant ( P values > 0.05). Our results suggest that short and ultrashort implants may be successfully placed and restored with single crowns in the resorbed maxillary molar region.

  10. Case studies of selected Project "Flash" events

    Directory of Open Access Journals (Sweden)

    K. A. Nicolaides

    2009-03-01

    Full Text Available Flooding is a consequence of the prevailing meteorological situation, the intensity and duration of precipitation, geomorphology, human activities over a geographical region and other factors. Floods result in damage and destruction of infrastructure and private property and, in some cases, in fatalities. Flash floods are sudden and quite localized in extend, characterized by excessive amounts of rainfall within a short period of time and are distinguished from other floods by their degree of severity. The broader knowledge concerning flash floods is useful for the better understanding of the underlying thermodynamic and dynamic mechanisms, as well as the associated physical processes. The wider understanding of flashfloods can form part of an integrated system for short and very short forecasting of these events. In the present study, the synoptic, dynamic and thermodynamic conditions during the development of a baroclinic depression which affected the area of Cyprus on 6 November 2005 are studied. The depression was associated with extreme weather phenomena, such as thunderstorms, a water spout and high precipitation accumulations. The results indicate the importance of the dynamic parameters in the system's development and the thermodynamic analysis has shown the convective potential of the atmosphere.

  11. An electro-optical timing diagnostic for pump-probe experiments at the free-electron laser in Hamburg FLASH

    International Nuclear Information System (INIS)

    Azima, Armin

    2009-07-01

    Femtosecond pump-probe experiments have extensively been used to follow atomic and molecular motion in time. The very intense extreme ultraviolet XUV light of the Free electron LASer in Hamburg FLASH facility allows to investigate fundamental processes such as direct one or few photon inner shell ionizations. A supplementary Ti:Sapphire near infrared femtosecond laser system allows to perform two-color pump-probe experiments with FLASH involving intense laser fields of hugely different photon energies. Within this work a bunch arrival measurement system has been built, which assists these two-color pump-probe experiments to reduce the temporal jitter of FLASH and to increase the temporal resolution. The diagnostic is based upon an electro-optical detection scheme and measures the relative arrival time between the Ti:Sapphire femtosecond pulse and the electron bunch, which generates the self-amplified by stimulated emission SASE XUV pulse in the undulator section of FLASH. Key feature of the diagnostic is a 150 m long glass fiber pulse transport line, which inflicts non-linear dispersion. A dispersion control system to compensate for this higher order dispersion has been developed including the control and programming of a spatial light phase modulator. It was possible to transport a 90 fs FWHM short near infrared femtosecond laser pulse Fourier limited by the dispersion compensated glass fiber. The electro-optical signal induced by the FLASH electron bunch was generated, characterized and optimized. The signal features beside the designated bunch arrival timing capability the additional possibility to measure the longitudinal electron bunch density distribution of an arbitrary bunch of FLASH in a single shot with a temporal resolution of below 100 fs RMS. Timing and bunch analysis capabilities of the developed diagnostic have been cross-checked with other comparable diagnostics at FLASH like the transversal deflecting cavity structure named LOLA. Finally, the

  12. An electro-optical timing diagnostic for pump-probe experiments at the free-electron laser in Hamburg FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Azima, Armin

    2009-07-15

    Femtosecond pump-probe experiments have extensively been used to follow atomic and molecular motion in time. The very intense extreme ultraviolet XUV light of the Free electron LASer in Hamburg FLASH facility allows to investigate fundamental processes such as direct one or few photon inner shell ionizations. A supplementary Ti:Sapphire near infrared femtosecond laser system allows to perform two-color pump-probe experiments with FLASH involving intense laser fields of hugely different photon energies. Within this work a bunch arrival measurement system has been built, which assists these two-color pump-probe experiments to reduce the temporal jitter of FLASH and to increase the temporal resolution. The diagnostic is based upon an electro-optical detection scheme and measures the relative arrival time between the Ti:Sapphire femtosecond pulse and the electron bunch, which generates the self-amplified by stimulated emission SASE XUV pulse in the undulator section of FLASH. Key feature of the diagnostic is a 150 m long glass fiber pulse transport line, which inflicts non-linear dispersion. A dispersion control system to compensate for this higher order dispersion has been developed including the control and programming of a spatial light phase modulator. It was possible to transport a 90 fs FWHM short near infrared femtosecond laser pulse Fourier limited by the dispersion compensated glass fiber. The electro-optical signal induced by the FLASH electron bunch was generated, characterized and optimized. The signal features beside the designated bunch arrival timing capability the additional possibility to measure the longitudinal electron bunch density distribution of an arbitrary bunch of FLASH in a single shot with a temporal resolution of below 100 fs RMS. Timing and bunch analysis capabilities of the developed diagnostic have been cross-checked with other comparable diagnostics at FLASH like the transversal deflecting cavity structure named LOLA. Finally, the

  13. Flashing coupled density wave oscillation

    International Nuclear Information System (INIS)

    Jiang Shengyao; Wu Xinxin; Zhang Youjie

    1997-07-01

    The experiment was performed on the test loop (HRTL-5), which simulates the geometry and system design of the 5 MW reactor. The phenomenon and mechanism of different kinds of two-phase flow instabilities, namely geyser instability, flashing instability and flashing coupled density wave instability are described. The especially interpreted flashing coupled density wave instability has never been studied well, it is analyzed by using a one-dimensional non-thermo equilibrium two-phase flow drift model computer code. Calculations are in good agreement with the experiment results. (5 refs.,5 figs., 1 tab.)

  14. WMO World Record Lightning Extremes: Longest Reported Flash Distance and Longest Reported Flash Duration.

    Science.gov (United States)

    Lang, Timothy J; Pédeboy, Stéphane; Rison, William; Cerveny, Randall S; Montanyà, Joan; Chauzy, Serge; MacGorman, Donald R; Holle, Ronald L; Ávila, Eldo E; Zhang, Yijun; Carbin, Gregory; Mansell, Edward R; Kuleshov, Yuriy; Peterson, Thomas C; Brunet, Manola; Driouech, Fatima; Krahenbuhl, Daniel S

    2017-06-01

    A World Meteorological Organization weather and climate extremes committee has judged that the world's longest reported distance for a single lightning flash occurred with a horizontal distance of 321 km (199.5 mi) over Oklahoma in 2007, while the world's longest reported duration for a single lightning flash is an event that lasted continuously for 7.74 seconds over southern France in 2012. In addition, the committee has unanimously recommended amendment of the AMS Glossary of Meteorology definition of lightning discharge as a "series of electrical processes taking place within 1 second" by removing the phrase "within one second" and replacing with "continuously." Validation of these new world extremes (a) demonstrates the recent and on-going dramatic augmentations and improvements to regional lightning detection and measurement networks, (b) provides reinforcement regarding the dangers of lightning, and (c) provides new information for lightning engineering concerns.

  15. Evaluating Letter Recognition, Flicker Fusion, and the Talbot-Plateau Law using Microsecond-Duration Flashes

    Science.gov (United States)

    Greene, Ernest

    2015-01-01

    Four experiments examined the ability of respondents to identify letters that were displayed on an LED array with flashes lasting little more than a microsecond. The first experiment displayed each letter with a single, simultaneous flash of all the dots forming the letter and established the relation of flash intensity to the probability of letter identification. The second experiment displayed the letters with multiple flashes at different frequencies to determine the probability that the sequence of flashes would be perceived as fused. The third experiment displayed the letters at a frequency that was above the flicker-fusion frequency, varying flash intensity to establish the amount needed to elicit a given probability of letter identification. The fourth experiment displayed each letter twice, once at a frequency where no flicker was perceived and also with steady light emission. The intensity of each flash was fixed and the steady intensity was varied; respondents were asked to judge whether the fused-flicker display and the steady display appeared to be the same brightness. Steady intensity was about double the average flash intensity where the two conditions were perceived as being equal in brightness. This is at odds with Talbot-Plateau law, which predicts that these two values should be equal. The law was formulated relative to a flash lasting half of each period, so it is surprising that it comes this close to being correct where the flash occupies only a millionth of the total period. PMID:25875652

  16. A geometric approach for fault detection and isolation of stator short circuit failure in a single asynchronous machine

    KAUST Repository

    Khelouat, Samir

    2012-06-01

    This paper deals with the problem of detection and isolation of stator short-circuit failure in a single asynchronous machine using a geometric approach. After recalling the basis of the geometric approach for fault detection and isolation in nonlinear systems, we will study some structural properties which are fault detectability and isolation fault filter existence. We will then design filters for residual generation. We will consider two approaches: a two-filters structure and a single filter structure, both aiming at generating residuals which are sensitive to one fault and insensitive to the other faults. Some numerical tests will be presented to illustrate the efficiency of the method.

  17. Corrosion testing in flash tanks

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, S.J.; Stead, N.J.

    1999-07-01

    As kraft pulp mills adopt modified cooking processes, an increasing amount of corrosion of carbon steel digester systems is being encountered. Many mills have had severe corrosion in the flash tanks, in particular, the first ({number{underscore}sign}1) flash tank. The work described in this report was aimed at characterizing the corrosion. Coupons of carbon steel, several stainless steels and titanium were exposed at two mills. At mill A, identical sets of coupons were exposed in the {number{underscore}sign}1 and {number{underscore}sign}2 flash tank. At mill B, three identical sets of coupons were placed in flash tank {number{underscore}sign}1. The results of the exposures showed that both carbon steel and titanium suffered high rates of general corrosion, while the stainless steels suffered varying degrees of localized attack. The ranking of the resistance of corrosion in the flash tank was the same ranking as would be expected in a reducing acid environment. In the light of the coupon results, organic acids is concluded to be the most likely cause of corrosion of the flash tanks.

  18. Radiation Tests of Highly scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories--Update 2011

    Science.gov (United States)

    Irom, Farokh; Nguyen, Duc N.

    2011-01-01

    High-density, commercial, nonvolatile flash memories with NAND architecture are now available from several manufacturers. This report examines SEE effects and TID response in single-level cell (SLC) 32Gb and multi-level cell (MLC) 64Gb NAND flash memories manufactured by Micron Technology.

  19. Radiation Tests of Highly Scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories - Update 2010

    Science.gov (United States)

    Irom, Farokh; Nguyen, Duc N.

    2010-01-01

    High-density, commercial, nonvolatile flash memories with NAND architecture are now available from several manufacturers. This report examines SEE effects and TID response in single-level cell (SLC) and multi-level cell (MLC) NAND flash memories manufactured by Micron Technology.

  20. Increasing the computational speed of flash calculations with applications for compositional, transient simulations

    DEFF Research Database (Denmark)

    Rasmussen, Claus P.; Krejbjerg, Kristian; Michelsen, Michael Locht

    2006-01-01

    Approaches are presented for reducing the computation time spent on flash calculations in compositional, transient simulations. In a conventional flash calculation, the majority of the simulation time is spent on stability analysis, even for systems far into the single-phase region. A criterion has...

  1. A single social defeat induces short-lasting behavioral sensitization to amphetamine

    NARCIS (Netherlands)

    de Jong, JG; Wasilewski, M; van der Vegt, BJ; Buwalda, B; Koolhaas, Jacob

    2005-01-01

    Repeated, intermittent exposure to psychostimulants or stressors results in long-lasting, progressive sensitization of the behavioral effects of a subsequent amphetamine (AMPH) challenge. Although behavioral sensitization has also been observed following a single drug pretreatment, the sensitizing

  2. Flash photolysis of rhodopsin in the cat retina

    International Nuclear Information System (INIS)

    Ripps, H.; Mehaffey, L.; Siegel, I.M.; Ernst, W.; Kemp, C.M.

    1981-01-01

    The bleaching of rhodopsin by short-duration flashes of a xenon discharge lamp was studied in vivo in the cat retina with the aid of a rapid, spectral-scan fundus reflectometer. Difference spectra recorded over a broad range of intensities showed that the bleaching efficacy of high-intensity flashes was less than that of longer duration, steady lights delivering the same amount of energy. Both the empirical results and those derived from a theoretical analysis of flash photolysis indicate that, under the conditions of these experiments, the upper limit of the flash bleaching of rhodopsin in cat is approximately 90%. Although the fact that a full bleach could not be attained is attributable to photoreversal, i.e., the photic regeneration of rhodopsin from its light-sensitive intermediates, the 90% limit is considerably higher than the 50% (or lower) value obtained under other experimental circumstances. Thus, it appears that the duration (approximately 1 ms) and spectral composition of the flash, coupled with the kinetic parameters of the thermal and photic reactions in the cat retina, reduce the light-induced regeneration of rhodopsin to approximately 10%

  3. A two-step model for senescence triggered by a single critically short telomere

    DEFF Research Database (Denmark)

    Abdallah, Pauline; Luciano, Pierre; Runge, Kurt W

    2009-01-01

    Telomeres protect chromosome ends from fusion and degradation. In the absence of a specific telomere elongation mechanism, their DNA shortens progressively with every round of replication, leading to replicative senescence. Here, we show that telomerase-deficient cells bearing a single, very shor...

  4. The short-term outcomes of conventional and single-port laparoscopic surgery for rectal cancer

    DEFF Research Database (Denmark)

    Levic, Katarina; Bulut, Orhan

    2014-01-01

    BACKGROUND: Single-port laparoscopic surgery (SPLS) has evolved as an alternative method to conventional laparoscopic surgery (CLS). The aim of this study is to evaluate the results of SPLS compared to CLS in the treatment of rectal cancer. MATERIAL AND METHODS: Prospectively collected data...

  5. An Effective Approach to Flash Vacuum Thermolytic Studies

    DEFF Research Database (Denmark)

    Carlsen, Lars; Egsgaard, Helge

    1980-01-01

    Flash vacuum thermolysis in combination with field ionization mass spectrometry, supplementary with collision activated spectra of the single field ionized molecules, is shown to be a facile and highly informative method for studying even very complex mixtures of primarily formed products...

  6. Modelling a short-wake meteor as a single or fragmenting body

    Science.gov (United States)

    Campbell-Brown, M.

    2017-09-01

    An attempt is made to model a meteor observed with the Canadian Automated Meteor Observatory tracking system using a single body model. This meteor showed only very faint wake, implying that fragmentation was not important. Previous attempts to model the meteor with models of fragmenting meteors had overpredicted the amount of wake seen. A single-body, non-homogeneous ablation code was developed, but proved unsuccessful at matching the observed light curve of the meteor, even after a thorough search of parameter space. A model of a meteoroid fragmenting in many small bursts of small fragments was developed in an attempt to match both the light curve and the observed wake, and it succeeded in producing a qualitative fit to the light curve and to the high-resolution wake.

  7. Flashing light in microalgae biotechnology.

    Science.gov (United States)

    Abu-Ghosh, Said; Fixler, Dror; Dubinsky, Zvy; Iluz, David

    2016-03-01

    Flashing light can enhance photosynthesis and improve the quality and quantity of microalgal biomass, as it can increase the products of interest by magnitudes. Therefore, the integration of flashing light effect into microalgal cultivation systems should be considered. However, microalgae require a balanced mix of the light/dark cycle for higher growth rates, and respond to light intensity differently according to the pigments acquired or lost during the growth. This review highlights recently published results on flashing light effect on microalgae and its applications in biotechnology, as well as the recently developed bioreactors designed to fulfill this effect. It also discusses how this knowledge can be applied in selecting the optimal light frequencies and intensities with specific technical properties for increasing biomass production and/or the yield of the chemicals of interest by microalgae belonging to different genera. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. On the chlorophill a fluorescence yield in chloroplasts upon excitation with twin turnover flashes (TTF) and high frequency flash trains

    NARCIS (Netherlands)

    Vredenberg, W.J.; Prasil, O.; Durchan, M.

    2007-01-01

    Chlorophyll fluorescence is routinely taken as a quantifiable measure of the redox state of the primary quinone acceptor QA of PSII. The variable fluorescence in thylakoids increases in a single turnover flash (STF) from its low dark level F o towards a maximum F mSTF when QA becomes reduced. We

  9. Single-electron transport driven by surface acoustic waves: Moving quantum dots versus short barriers

    DEFF Research Database (Denmark)

    Utko, Pawel; Hansen, Jørn Bindslev; Lindelof, Poul Erik

    2007-01-01

    We have investigated the response of the acoustoelectric-current driven by a surface-acoustic wave through a quantum point contact in the closed-channel regime. Under proper conditions, the current develops plateaus at integer multiples of ef when the frequency f of the surface-acoustic wave...... or the gate voltage V-g of the point contact is varied. A pronounced 1.1 MHz beat period of the current indicates that the interference of the surface-acoustic wave with reflected waves matters. This is supported by the results obtained after a second independent beam of surface-acoustic wave was added......, though at different current values, as if they were superposed on each other. Their presence could result from two independent quantization mechanisms for the acoustoelectric-current. We point out that short potential barriers determining the properties of our nominally long constrictions could lead...

  10. Success rate of short dental implants supporting single crowns and fixed bridges.

    Science.gov (United States)

    Malmstrom, Hans; Gupta, Bhumija; Ghanem, Alexis; Cacciato, Rita; Ren, Yanfang; Romanos, Georgios E

    2016-09-01

    Bone grafts (sinus lift and/or ridge augmentation) may become an obstacle for some patients who desire implant treatment. The objective of this study was to evaluate the success of six- and eight-millimeters rough surface design short dental implants, for up to 2 years in function, when compared to conventional length (11 mm) implants. A total of 25.6-, 20.8- and 35.11-mm length implants were placed and restored in 30 subjects (11 males, 19 females) between the age of 22 and 80, following a standard protocol. Implant mobility, crestal bone loss as well as periodontal parameters were evaluated immediately after restoration placement, at 6, 12 and 24 months. There was one failure of one 6-mm implant during the healing phase and one restorative failure. The median crestal bone loss at 24 months was 0.45 mm for the 6-mm implants, 0.55 mm for the 8 mm implants and 0.65 mm for the 11-mm implants. The success rate for 6-mm implants was 97% and for 8-mm and 11-mm implants 100%. Based on this preliminary data, we conclude that rough surface design short dental implants (6 and 8 mm in length) have similar success rate when compared to 11-mm implants. Long-term data with larger number of implants and subjects are needed to confirm these results. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. Online short-term heat load forecasting for single family houses

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Nielsen, Henrik Aalborg

    2013-01-01

    This paper presents a method for forecasting the load for heating in a single-family house. Both space and hot tap water heating are forecasted. The forecasting model is built using data from sixteen houses in Sønderborg, Denmark, combined with local climate measurements and weather forecasts....... Every hour the hourly heat load for each house the following two days is forecasted. The forecast models are adaptive linear time-series models and the climate inputs used are: ambient temperature, global radiation, and wind speed. A computationally efficient recursive least squares scheme is used...

  12. High affinity γPNA sandwich hybridization assay for rapid detection of short nucleic acid targets with single mismatch discrimination.

    Science.gov (United States)

    Goldman, Johnathan M; Zhang, Li Ang; Manna, Arunava; Armitage, Bruce A; Ly, Danith H; Schneider, James W

    2013-07-08

    Hybridization analysis of short DNA and RNA targets presents many challenges for detection. The commonly employed sandwich hybridization approach cannot be implemented for these short targets due to insufficient probe-target binding strengths for unmodified DNA probes. Here, we present a method capable of rapid and stable sandwich hybridization detection for 22 nucleotide DNA and RNA targets. Stable hybridization is achieved using an n-alkylated, polyethylene glycol γ-carbon modified peptide nucleic acid (γPNA) amphiphile. The γPNA's exceptionally high affinity enables stable hybridization of a second DNA-based probe to the remaining bases of the short target. Upon hybridization of both probes, an electrophoretic mobility shift is measured via interaction of the n-alkane modification on the γPNA with capillary electrophoresis running buffer containing nonionic surfactant micelles. We find that sandwich hybridization of both probes is stable under multiple binding configurations and demonstrate single base mismatch discrimination. The binding strength of both probes is also stabilized via coaxial stacking on adjacent hybridization to targets. We conclude with a discussion on the implementation of the proposed sandwich hybridization assay as a high-throughput microRNA detection method.

  13. Effect of temperament on cortisol response to a single exercise bout in Thoroughbred racehorses - short communication.

    Science.gov (United States)

    Bohák, Zsófia; Szenci, Ottó; Harnos, Andrea; Kutasi, Orsolya; Kovács, Levente

    2017-12-01

    Temperament has not been taken into account in previous studies evaluating the stress response to exercise in horses. The aim of the present study was to investigate the cortisol response in Thoroughbred racehorses to a single exercise bout, and to analyse the results based on the basic personality of the horse examined. Twenty healthy Thoroughbred horses were selected for the study based on a 25-item rating questionnaire survey used for characterising equine temperament. Eight temperamental and twelve calm horses took part in the experiment. The horses trotted as a warm-up activity, and then galloped on a rounded sand track. Blood sampling was conducted four times for each horse. Horses with a more excitable temperament showed a higher cortisol response to the test (P = 0.036). In conclusion, cortisol levels in response to a mild intensive exercise can be affected by temperament in horses. Serum cortisol may be a relevant marker to quantify individual temperamental differences in racehorses.

  14. Assessment of nitrification potential in ground water using short term, single-well injection experiments.

    Science.gov (United States)

    Smith, R L; Baumgartner, L K; Miller, D N; Repert, D A; Böhlke, J K

    2006-01-01

    Nitrification was measured within a sand and gravel aquifer on Cape Cod, MA, using a series of single-well injection tests. The aquifer contained a wastewater-derived contaminant plume, the core of which was anoxic and contained ammonium. The study was conducted near the downgradient end of the ammonium zone, which was characterized by inversely trending vertical gradients of oxygen (270 to 0 microM) and ammonium (19 to 625 microM) and appeared to be a potentially active zone for nitrification. The tests were conducted by injecting a tracer solution (ambient ground water + added constituents) into selected locations within the gradients using multilevel samplers. After injection, the tracers moved by natural ground water flow and were sampled with time from the injection port. Rates of nitrification were determined from changes in nitrate and nitrite concentration relative to bromide. Initial tests were conducted with (15)N-enriched ammonium; subsequent tests examined the effect of adding ammonium, nitrite, or oxygen above background concentrations and of adding difluoromethane, a nitrification inhibitor. In situ net nitrate production exceeded net nitrite production by 3- to 6- fold and production rates of both decreased in the presence of difluoromethane. Nitrification rates were 0.02-0.28 mumol (L aquifer)(-1) h(-1) with in situ oxygen concentrations and up to 0.81 mumol (L aquifer)(-1) h(-1) with non-limiting substrate concentrations. Geochemical considerations indicate that the rates derived from single-well injection tests yielded overestimates of in situ rates, possibly because the injections promoted small-scale mixing within a transport-limited reaction zone. Nonetheless, these tests were useful for characterizing ground water nitrification in situ and for comparing potential rates of activity when the tracer cloud included non-limiting ammonium and oxygen concentrations.

  15. Short wave infrared hyperspectral imaging for recovered post-consumer single and mixed polymers characterization

    Science.gov (United States)

    Bonifazi, Giuseppe; Palmieri, Roberta; Serranti, Silvia

    2015-03-01

    Postconsumer plastics from packing and packaging represent about the 60% of the total plastic wastes (i.e. 23 million of tons) produced in Europe. The EU Directive (2014/12/EC) fixes as target that the 60%, by weight, of packaging waste has to be recovered, or thermally valorized. When recovered, the same directive established that packaging waste has to be recycled in a percentage ranging between 55% (minimum) and 60% (maximum). The non-respect of these rules can produce that large quantities of end-of-life plastic products, specifically those utilized for packaging, are disposed-off, with a strong environmental impact. The application of recycling strategies, finalized to polymer recovery, can represent an opportunity to reduce: i) not renewable raw materials (i.e. oil) utilization, ii) carbon dioxide emissions and iii) amount of plastic waste disposed-off. Aim of this work was to perform a full characterization of different end-of-life polymers based products, constituted not only by single polymers but also of mixtures, in order to realize their identification for quality control and/or certification assessment. The study was specifically addressed to characterize the different recovered products as resulting from a recycling plant where classical processing flow-sheets, based on milling, classification and separation, are applied. To reach this goal, an innovative sensing technique, based on the utilization of a HyperSpectral[b] I[/b]maging (HSI) device working in the SWIR region (1000-2500 nm), was investigated. Following this strategy, single polymers and/or mixed polymers recovered were correctly recognized. The main advantage of the proposed approach is linked to the possibility to perform "on-line" analyses, that is directly on the different material flow streams, as resulting from processing, without any physical sampling and classical laboratory "off-line" determination.

  16. Assessment of nitrification potential in ground water using short term, single-well injection experiments

    Science.gov (United States)

    Smith, R.L.; Baumgartner, L.K.; Miller, D.N.; Repert, D.A.; Böhlke, J.K.

    2006-01-01

    Nitrification was measured within a sand and gravel aquifer on Cape Cod, MA, using a series of single-well injection tests. The aquifer contained a wastewater-derived contaminant plume, the core of which was anoxic and contained ammonium. The study was conducted near the downgradient end of the ammonium zone, which was characterized by inversely trending vertical gradients of oxygen (270 to 0 μM) and ammonium (19 to 625 μM) and appeared to be a potentially active zone for nitrification. The tests were conducted by injecting a tracer solution (ambient ground water + added constituents) into selected locations within the gradients using multilevel samplers. After injection, the tracers moved by natural ground water flow and were sampled with time from the injection port. Rates of nitrification were determined from changes in nitrate and nitrite concentration relative to bromide. Initial tests were conducted with 15N-enriched ammonium; subsequent tests examined the effect of adding ammonium, nitrite, or oxygen above background concentrations and of adding difluoromethane, a nitrification inhibitor. In situ net nitrate production exceeded net nitrite production by 3- to 6- fold and production rates of both decreased in the presence of difluoromethane. Nitrification rates were 0.02–0.28 μmol (L aquifer)−1 h−1 with in situ oxygen concentrations and up to 0.81 μmol (L aquifer)−1 h−1 with non-limiting substrate concentrations. Geochemical considerations indicate that the rates derived from single-well injection tests yielded overestimates of in situ rates, possibly because the injections promoted small-scale mixing within a transport-limited reaction zone. Nonetheless, these tests were useful for characterizing ground water nitrification in situ and for comparing potential rates of activity when the tracer cloud included non-limiting ammonium and oxygen concentrations.

  17. Hot Flashes amd Night Sweats (PDQ)

    Science.gov (United States)

    ... controlled with estrogen replacement therapy. Hot flashes during natural or treatment-related menopause can be controlled with estrogen replacement ... been studied in the treatment of hot flashes. Treatments that help patients cope with stress and anxiety may help manage hot flashes. Treatments ...

  18. Detection of Malicious Flash Banner Advertisements

    Directory of Open Access Journals (Sweden)

    Kirill Alekseevich Samosadnyy

    2014-09-01

    Full Text Available The paper addresses the problem of detecting malicious flash advertisements. As a result, detection method based on dynamic analysis that modify flash application and execute it in Adobe Flash player is proposed and evaluated on synthetic and real world examples.

  19. Flash CS4: The Missing Manual

    CERN Document Server

    Grover, Chris

    2008-01-01

    Unlock the power of Flash and bring gorgeous animations to life onscreen. Flash CS4: The Missing Manual includes a complete primer on animation, a guided tour of the program's tools and capabilities, lots of new illustrations, and more details on working with video. Beginners will learn to use the software in no time, and experienced Flash designers will improve their skills.

  20. Jaan Toomik ajakirjas Flash Art

    Index Scriptorium Estoniae

    1999-01-01

    Kunstiajakirja "Flash Art" maikuu numbris Ando Keskküla artikkel, mis annab ülevaate J. Toomiku loomingust ja peatub pikemalt tema olulisematel töödel. 10. juunist J. Toomiku isiknäitus Londoni fotograafide galeriis. Eksponeeritud video "Uisutaja"

  1. Ingmar Muusikuse foto Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    Flash Arti 1999. a. oktoobrinumbris virtuaalse näituse rubriigis Ando Keskküla artikkel radikaalsemast eesti kunstist ja kunstielust postsotsialistlikul ajastul. Illustratsiooniks Liina Siibi fotokompositsioonid, Ingmar Muusikuse foto Raoul Kurvitza, Ene-Liis Semperi ja Kiwa Eesti Panga performance'ist

  2. [Short-term outcome of single stenting technique for unruptured wide-necked tiny aneurysms of the anterior circulation].

    Science.gov (United States)

    Lu, Jun; Wang, Daming; Liu, Jiachun; Wang, Lijun; Qi, Peng

    2015-07-01

    To evaluate the short-term outcome of single stenting technique for unruptured, wide-necked, tiny aneurysms of the anterior circulation. Eleven unruptured, wide-necked, tiny aneurysms of the anterior circulation were treated by a single stent deployed in the parent artery between January 2008 and July 2013 in Department of Neurosurgery in Beijing Hospital. The maximum diameter of the aneurysms ranged from 2.0 to 3.0 mm, mean (2.4 ± 0.4) mm, and the dome-to-neck ratios were all ≤ 1.2. The locations were clinoid segment of internal carotid artery (n=2), posterior communicating artery origin (n=4), anterior choroidal artery origin (n=2) and middle cerebral artery bifurcation (n=3). All internal carotid aneurysms were located in the medial and/or ventral wall of the internal carotid artery. The rate of aneurysm obliteration and rupture during follow-up was obtained by repeat angiography and clinic or telephone interview respectively. Sole stent placement in the parent artery was intentionally performed for nine aneurysms, while attempt of coiling after stent deployment for the other two aneurysms failed due to unsuccessful microcatherization. Ten stents were successfully deployed, of which one was used to treat two tandem lesions simultaneously. Only one aneurysm became smaller immediately postprocedure. No perioperative complications occurred. Angiographic follow-up after a mean period of (13 ± 6) months (range 8-24 months) revealed that 8 aneurysms did no change in size, 2 became smaller and only one was totally occluded. Asymptomatic in-stent stenosis of the parent artery was found in all 3 shrinking or occluded aneurysms. No aneurysm rupture was observed in the clinical follow-up. For those unruptured, wide-necked, tiny aneurysms arising at branching sites in the anterior circulation, single stenting technique seems to be a safe alternative treatment, while the short-term rate of aneurysm occlusion is low.

  3. Coherence properties of the radiation from FLASH

    International Nuclear Information System (INIS)

    Schneidmiller, E.A.; Yurkov, M.V.

    2015-02-01

    FLASH is the first free electron laser user facility operating in the vacuum ultraviolet and soft x-ray wavelength range. Many user experiments require knowledge of the spatial and temporal coherence properties of the radiation. In this paper we present an analysis of the coherence properties of the radiation for the fundamental and for the higher odd frequency harmonics. We show that temporal and spatial coherence reach maximum close to the FEL saturation but may degrade significantly in the post-saturation regime. We also find that the pointing stability of short FEL pulses is limited due to the fact that non-azimuthal FEL eigenmodes are not sufficiently suppressed. We discuss possible ways for improving the degree of transverse coherence and the pointing stability.

  4. Calibration Improvements for the Hubble Space Telescope Advanced Camera for Surveys Wide Field Channel: Post-Flash and Commanding Overheads

    Science.gov (United States)

    Miles, Nathan; Grogin, Norman; ACS Instrument Team

    2018-01-01

    The Advanced Camera for Surveys (ACS) Wide Field Channel (WFC) post-flash calibration reference file currently suffers from an improper dark subtraction resulting in a variety of image artifacts. In order to cure these artifacts, a new technique has been implemented where the total sum of the exposure time and flash duration for each image is held constant. The flash duration and exposure time are varied to produce two sets of images that are differenced to produce the new post-flash reference file. The first set all have long exposure times and short flash durations, while the second set has exactly the opposite. Next, using the newly generated post-flash reference file we derive the commanding overheads associated with any ACS/WFC post-flashed observation. Whenever ACS/WFC receives commands it takes a finite amount of time for the instrument to execute them, when commands are executed while the instrument is in ACCUM mode additional dark current builds up and is added to the exposure. This additional dark current is not accounted for in the EXPTIME header keyword and therefore is not removed during the DARKCORR processing step in CALACS. By leveraging the stability of hot-stable pixels and the new post-flash reference file, we analyze 1,273 post-flashed darks and extract the commanding overheads associated with ACS/WFC post-flashed data.

  5. Long-term outcomes of short dental implants supporting single crowns in posterior region: a clinical retrospective study of 5-10 years

    NARCIS (Netherlands)

    Lai, H.C.; Si, M.S.; Zhuang, L.F.; Shen, H.; Liu, Y.; Wismeijer, D.

    2013-01-01

    OBJECTIVE: Aimed to evaluate the long-term clinical and radiographic outcomes of short implants supporting single crowns in the posterior regions. MATERIAL AND METHODS: A retrospective study design was adopted. The clinical and radiographic data of 231 short implants (intra-bony length ≤8 mm)

  6. Substitute CT generation from a single ultra short time echo MRI sequence: preliminary study

    Science.gov (United States)

    Ghose, Soumya; Dowling, Jason A.; Rai, Robba; Liney, Gary P.

    2017-04-01

    In MR guided radiation therapy planning both MR and CT images for a patient are acquired and co-registered to obtain a tissue specific HU map. Generation of the HU map directly from the MRI would eliminate the CT acquisition and may improve radiation therapy planning. In this preliminary study of substitute CT (sCT) generation, two porcine leg phantoms were scanned using a 3D ultrashort echo time (PETRA) sequence and co-registered to corresponding CT images to build tissue specific regression models. The model was created from one co-registered CT-PETRA pair to generate the sCT for the other PETRA image. An expectation maximization based clustering was performed on the co-registered PETRA image to identify the soft tissues, dense bone and air class membership probabilities. A tissue specific non linear regression model was built from one registered CT-PETRA pair dataset to predict the sCT of the second PETRA image in a two-fold cross validation schema. A complete substitute CT is generated in 3 min. The mean absolute HU error for air was 0.3 HU, bone was 95 HU, fat was 30 HU and for muscle it was 10 HU. The mean surface reconstruction error for the bone was 1.3 mm. The PETRA sequence enabled a low mean absolute surface distance for the bone and a low HU error for other classes. The sCT generated from a single PETRA sequence shows promise for the generation of fast sCT for MRI based radiation therapy planning.

  7. Foundation Flash CS4 for Designers

    CERN Document Server

    Green, Tom

    2008-01-01

    In this book, you'll learn:* How to create effective animations using the new Motion Editor and animation tools * How to use the new 3D features to animate objects in 3D space * Best-practice tips and techniques from some of the top Flash practitioners on the planet * How to create captioned video and full-screen video, and deploy HD video using Flash * Techniques for using the Flash UI components as well as XML documents to create stunning,interactive presentations If you're a Flash designer looking for a solid overview of Flash CS4, this book is for you. Through the use of solid and practica

  8. uFlip: Understanding Flash IO Patterns

    DEFF Research Database (Denmark)

    Bouganim, Luc; Jonsson, Bjørn; Bonnet, Philippe

    2009-01-01

    want to establish what kind of IOs should be favored (or avoided) when designing algorithms and architectures for flash-based systems. In this paper, we focus on flash IO patterns, that capture relevant distribution of IOs in time and space, and our goal is to quantify their performance. We define u......FLIP, a benchmark for measuring the response time of flash IO patterns. We also present a benchmarking methodology which takes into account the particular characteristics of flash devices. Finally, we present the results obtained by measuring eleven flash devices, and derive a set of design hints that should drive...

  9. The Adsorption of Short Single-Stranded DNA Oligomers on Mineral Surfaces

    Science.gov (United States)

    Kopstein, M.; Sverjensky, D. A.; Hazen, R. M.; Cleaves, H. J.

    2009-12-01

    Previous studies have described feasible pathways for the synthesis of simple organic building blocks such as formaldehyde and hydrogen cyanide, and their reaction to form more complex biomolecules such as nucleotide bases, amino acids and sugars (Miller and Orgel 1974, Miller and Cleaves 2006). However, the polymerization of monomers into a useful genetic material remains problematic (Orgel 2004). Organic building blocks were unlikely to polymerize from very dilute aqueous solution in the primitive oceans. Mineral surface adsorption has been suggested as a possible mechanism for concentrating the necessary building blocks (Bernal 1951). This study focused on the adsorption behavior of single-stranded DNA homo-oligomers of adenine and thymine (including the monomers, dimers, tetramers, hexamers, octomers, and decamers) with five different mineral surfaces (pyrite, rutile, hematite, olivine and calcite). Adsorption was studied in 0.1 M pH 8.1 KHCO3 with0.05 M NaCl as background electrolyte. Solutions were mixed for 24 hours at room temperature, centrifuged and the supernatants analyzed by UV/visible spectrophotometry. Equilibrium solution concentrations were measured and used to determine the number of moles adsorbed per square meter. Langmuir isotherms were constructed using the experimental data. It was found that adenine-containing molecules tend to bind much more strongly than thymine-containing molecules. It was also found that the number of moles adsorbed at saturation tends to fall with increasing chain length, while adsorption affinity tends to rise. Oligomer length appears to affect adsorption more than the mineral type. These results may have implications for the primordial organization of the first nucleic acid molecules as the persistence of extra-cellular nucleic acids in the environment. References Bernal, J. D. (1951) The Physical Basis of Life (Routledge, London). Miller S.L. and Cleaves, H.J. (2006) Prebiotic chemistry on the primitive Earth. In

  10. Single-Incision Versus Three-Port Laparoscopic Appendectomy: Short- and Long-Term Outcomes.

    Science.gov (United States)

    Vellei, Samatha; Borri, Alessandro

    2017-08-01

    To compare the outcome of patients who had undergone single-incision laparoscopic appendectomy (SILA) with others who had undergone three-port laparoscopic appendectomy (3-PORT). Data from all adults with uncomplicated appendicitis treated by laparoscopic appendectomy between June 2012 and December 2015 were prospectively collected. Patients with chronic pain, appendix malignancy, at least two previous laparotomies, and those undergoing concomitant surgery for different condition were excluded from analysis. Postoperative pain was assessed by a visual analog scale (VAS). Patients were reviewed postoperatively at 7 days and 1 month in the outpatient clinic. Late complications were assessed with a telephonic interview. A total of 91 patients were included (46 SILA; 45 3-PORT). There were 16 males and 30 females in the SILA group (mean age = 26.76 ± 10.58 years) and 18 males and 27 females in the 3-PORT group (mean age = 26.84 ± 10.79 years). The mean operative time for SILA was 48.54 ± 12.80 min, for the 3-PORT group the mean operative time was 46.33 ± 15.54 min (P = 0.46). No case required conversion. Mean postoperative hospital length of stay was 1.87 ± 0.69 days for SILA and 2.38 ± 1.11 days for 3-PORT (P = 0.01). VAS value of 3.91 ± 1.96 and mean ketorolac usage of 0.38 ± 0.65 in 3-PORT group and SILA patients reported 3.70 ± 1.58 and 0.39 ± 0.58, respectively (P = 0.91). Our mean follow-up in SILA group was 25.75 ± 10.82 months, for 3-PORT group the mean follow-up was 26.9 ± 11.8 months. Eleven patients missed long-term follow-up. No incisional hernia was found. There is a statistically significant difference in cosmetic evaluation in favor of SILA (P PORT laparoscopic appendectomy, but after SILA procedure discharge was quicker and long-term cosmetic satisfaction was superior.

  11. From Sulfide Flash Smelting to a Novel Flash Ironmaking Technology

    Science.gov (United States)

    Sohn, Hong Yong

    A novel flash ironmaking technology is under development at the University of Utah under the support of U.S. Department of Energy (DOE) and American Iron and Steel Institute (AISI). The history of the development from the conception of the idea to the current status will be discussed. The flash ironmaking process produces iron directly from fine iron ore concentrates without requiring cokemaking and pelletization/sintering, which will enable the technology to significantly reduce energy consumption and carbon dioxide emissions compared with blast furnace ironmaking. Unlike other gas-based ironmaking processes, this technology will not suffer from the problems of solid sticking and fusion. Current work is focused on the method of supplying the energy required to maintain the necessary temperature, as an intermediate step to determine the scalability for larger, industrial-scale pilot trials.

  12. Pilot evaluation of hypnosis for the treatment of hot flashes in breast cancer survivors.

    Science.gov (United States)

    Elkins, Gary; Marcus, Joel; Stearns, Vered; Hasan Rajab, M

    2007-05-01

    This single arm, pilot study investigated the use of hypnosis to reduce hot flashes in 16 breast cancer survivors. Each patient provided baseline data and received 4 weekly sessions of hypnosis that followed a standardized transcript. Patients were also instructed in self-hypnosis. Throughout the clinical care, patients completed daily diaries of the frequency and severity of their hot flashes. Patients also completed baseline and post-treatment ratings of the degree to which hot flashes interfered with daily activities and quality of life. Results indicated a 59% decrease in total daily hot flashes and a 70% decrease in weekly hot flash scores from their baselines. There was also a significant decrease in the degree to which hot flashes interfered with daily activities for all measures including work, social activities, leisure activities, sleep, mood, concentration, relations with others, sexuality, enjoyment of life, and overall quality of life. This pilot study suggests that clinical hypnosis may be an effective non-hormonal and non-pharmacological treatment for hot flashes. A randomized, controlled clinical trial is planned to more definitively elucidate the efficacy and applicability of hypnosis for reducing hot flashes.

  13. Standardized clinical photography: the role of flash.

    Science.gov (United States)

    Cariello, Angelino; Viana, Giovanni André; Osaki, Midori; Pamplona, André Luis; Höfling-Lima, Ana Luisa

    2012-01-01

    Medical photographic documentation is important for professional, research, and ethical concerns. This study analyzed the possible interference that the flash could cause on evaluation of lower eyelid cosmetic results. Standardized photographs with and without flash were taken of 10 patients with dermatochalasis. The photographs were evaluated by 3 independent observers, as before (without flash) and after (with flash) an alternative esthetic treatment of the lower eyelid. The observers rated the overall cosmetic improvement of the lower eyelid photographs on a visual analog scale. The 3 surgeons believed that there was improvement in cosmetic outcome from the first (without flash) to the second (with flash) picture. The results indicate that a simple flash addition in one of 2 consecutive photographs, taken seconds apart, could influence the impression of experienced surgeons on the final outcome of oculoplastic surgeries and may constitute a bias in observer-dependent studies.

  14. Wide field-of-view dual-band multispectral muzzle flash detection

    Science.gov (United States)

    Montoya, J.; Melchor, J.; Spiliotis, P.; Taplin, L.

    2013-06-01

    Sensor technologies are undergoing revolutionary advances, as seen in the rapid growth of multispectral methodologies. Increases in spatial, spectral, and temporal resolution, and in breadth of spectral coverage, render feasible sensors that function with unprecedented performance. A system was developed that addresses many of the key hardware requirements for a practical dual-band multispectral acquisition system, including wide field of view and spectral/temporal shift between dual bands. The system was designed using a novel dichroic beam splitter and dual band-pass filter configuration that creates two side-by-side images of a scene on a single sensor. A high-speed CMOS sensor was used to simultaneously capture data from the entire scene in both spectral bands using a short focal-length lens that provided a wide field-of-view. The beam-splitter components were arranged such that the two images were maintained in optical alignment and real-time intra-band processing could be carried out using only simple arithmetic on the image halves. An experiment related to limitations of the system to address multispectral detection requirements was performed. This characterized the system's low spectral variation across its wide field of view. This paper provides lessons learned on the general limitation of key hardware components required for multispectral muzzle flash detection, using the system as a hardware example combined with simulated multispectral muzzle flash and background signatures.

  15. Insertion of Short Amino-Functionalized Single-Walled Carbon Nanotubes into Phospholipid Bilayer Occurs by Passive Diffusion

    Science.gov (United States)

    Kraszewski, Sebastian; Bianco, Alberto; Tarek, Mounir; Ramseyer, Christophe

    2012-01-01

    Carbon nanotubes have been proposed to be efficient nanovectors able to deliver genetic or therapeutic cargo into living cells. However, a direct evidence of the molecular mechanism of their translocation across cell membranes is still needed. Here, we report on an extensive computational study of short (5 nm length) pristine and functionalized single-walled carbon nanotubes uptake by phospholipid bilayer models using all-atom molecular dynamics simulations. Our data support the hypothesis of a direct translocation of the nanotubes through the phospholipid membrane. We find that insertion of neat nanotubes within the bilayer is a “nanoneedle” like process, which can often be divided in three consecutive steps: landing and floating, penetration of the lipid headgroup area and finally sliding into the membrane core. The presence of functional groups at moderate concentrations does not modify the overall scheme of diffusion mechanism, provided that their deprotonated state favors translocation through the lipid bilayer. PMID:22815794

  16. Post flashed darks

    Science.gov (United States)

    Anderson, Jay

    2013-10-01

    The goal of this program is to take the data that will allow a more current calibration for the ACS/WFC CTE correction. We will take data in a similar way that the WFC3/UVIS data are taken so that the same CTE code can be fit to both of them. Currently, the ACS code operates directly on FLT images, but the UVIS code operates on RAW images. Also, the UVIS code is constrained by means of datasets with short-long dark combinations, which allow a careful assessment of CTE losses under low-background conditions.This dataset will allow a similar procedure to be used to constrain the ACS/WFC correction as has been recently used for WFC3/UVIS. WFC3/UFVIS has a similar program this year, and PI-Anderson expects to develop up-to-date calibrations for both at the same time. Once an up-to-date model is constructed, it should be implemented in the pipeline, hopefully for both instruments.

  17. Collecting response times using Amazon Mechanical Turk and Adobe Flash.

    Science.gov (United States)

    Simcox, Travis; Fiez, Julie A

    2014-03-01

    Crowdsourcing systems like Amazon's Mechanical Turk (AMT) allow data to be collected from a large sample of people in a short amount of time. This use has garnered considerable interest from behavioral scientists. So far, most experiments conducted on AMT have focused on survey-type instruments because of difficulties inherent in running many experimental paradigms over the Internet. This study investigated the viability of presenting stimuli and collecting response times using Adobe Flash to run ActionScript 3 code in conjunction with AMT. First, the timing properties of Adobe Flash were investigated using a phototransistor and two desktop computers running under several conditions mimicking those that may be present in research using AMT. This experiment revealed some strengths and weaknesses of the timing capabilities of this method. Next, a flanker task and a lexical decision task implemented in Adobe Flash were administered to participants recruited with AMT. The expected effects in these tasks were replicated. Power analyses were conducted to describe the number of participants needed to replicate these effects. A questionnaire was used to investigate previously undescribed computer use habits of 100 participants on AMT. We conclude that a Flash program in conjunction with AMT can be successfully used for running many experimental paradigms that rely on response times, although experimenters must understand the limitations of the method.

  18. Effect of short-term alkaline intervention on the performance of buffer-free single-chamber microbial fuel cell.

    Science.gov (United States)

    Yang, Na; Ren, Yueping; Li, Xiufen; Wang, Xinhua

    2017-06-01

    Anolyte acidification is a drawback restricting the electricity generation performance of the buffer-free microbial fuel cells (MFC). In this paper, a small amount of alkali-treated anion exchange resin (AER) was placed in front of the anode in the KCl mediated single-chamber MFC to slowly release hydroxyl ions (OH - ) and neutralize the H + ions that are generated by the anodic reaction in two running cycles. This short-term alkaline intervention to the KCl anolyte has promoted the proliferation of electroactive Geobacter sp. and enhanced the self-buffering capacity of the KCl-AER-MFC. The pH of the KCl anolyte in the KCl-AER-MFC increased and became more stable in each running cycle compared with that of the KCl-MFC after the short-term alkaline intervention. The maximum power density (P max ) of the KCl-AER-MFC increased from 307.5mW·m -2 to 542.8mW·m -2 , slightly lower than that of the PBS-MFC (640.7mW·m -2 ). The coulombic efficiency (CE) of the KCl-AER-MFC increased from 54.1% to 61.2% which is already very close to that of the PBS-MFC (61.9%). The results in this paper indicate that short-term alkaline intervention to the anolyte is an effective strategy to further promote the performance of buffer-free MFCs. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Influence of crown-to-implant ratio on stress around single short-wide implants: a photoelastic stress analysis.

    Science.gov (United States)

    Sotto-Maior, Bruno Salles; Senna, Plinio Mendes; da Silva-Neto, João Paulo; de Arruda Nóbilo, Mauro Antônio; Del Bel Cury, Altair Antoninha

    2015-01-01

    The aim of this study was to evaluate the photoelastic fringe patterns around two short-wide implants supporting single crowns with different crown-to-implant (C/I) ratios. External hexagon (EH) cylindrical implants (5 × 7 mm) or Morse Taper (MT) conical implants (5 × 6 mm) were embedded individually into photoelastic resin blocks. Each implant received a single metal-ceramic crown, with a C/I ratio of 1:1 or 2:1 (n = 10). Each set was positioned in a polariscope and submitted to a 0.5 kgf compressive load, applied axially or obliquely (30°). The polariscope images were digitally recorded, and based on isoclinal and isochromatic fringes, the shear stress was calculated at 5 predetermined points around each implant. Data were analyzed by two-way ANOVA (α = 0.05). Under axial loading, the stress was concentrated at the crestal region, and there were no differences between C/I ratio or implant types. In contrast, under oblique loading, EH implants showed lower stress values than the MT group and the 2:1 C/I ratio showed higher stress concentration for both implant types (p implants showed stress distribution through a higher area than the EH implant did, with a tendency to direct the stress toward the implant's apex under oblique loading. MT conical short-wide implants showed higher stress values that were distributed through a higher area directed to the implant apex. The C/I ratio influences the stress distribution only under oblique loading. © 2014 by the American College of Prosthodontists.

  20. A Kalman Filter-Based Short Baseline RTK Algorithm for Single-Frequency Combination of GPS and BDS

    Directory of Open Access Journals (Sweden)

    Sihao Zhao

    2014-08-01

    Full Text Available The emerging Global Navigation Satellite Systems (GNSS including the BeiDou Navigation Satellite System (BDS offer more visible satellites for positioning users. To employ those new satellites in a real-time kinematic (RTK algorithm to enhance positioning precision and availability, a data processing model for the dual constellation of GPS and BDS is proposed and analyzed. A Kalman filter-based algorithm is developed to estimate the float ambiguities for short baseline scenarios. The entire work process of the high-precision algorithm based on the proposed model is deeply investigated in detail. The model is validated with real GPS and BDS data recorded from one zero and two short baseline experiments. Results show that the proposed algorithm can generate fixed baseline output with the same precision level as that of either a single GPS or BDS RTK algorithm. The significantly improved fixed rate and time to first fix of the proposed method demonstrates a better availability and effectiveness on processing multi-GNSSs.

  1. A Kalman filter-based short baseline RTK algorithm for single-frequency combination of GPS and BDS.

    Science.gov (United States)

    Zhao, Sihao; Cui, Xiaowei; Guan, Feng; Lu, Mingquan

    2014-08-20

    The emerging Global Navigation Satellite Systems (GNSS) including the BeiDou Navigation Satellite System (BDS) offer more visible satellites for positioning users. To employ those new satellites in a real-time kinematic (RTK) algorithm to enhance positioning precision and availability, a data processing model for the dual constellation of GPS and BDS is proposed and analyzed. A Kalman filter-based algorithm is developed to estimate the float ambiguities for short baseline scenarios. The entire work process of the high-precision algorithm based on the proposed model is deeply investigated in detail. The model is validated with real GPS and BDS data recorded from one zero and two short baseline experiments. Results show that the proposed algorithm can generate fixed baseline output with the same precision level as that of either a single GPS or BDS RTK algorithm. The significantly improved fixed rate and time to first fix of the proposed method demonstrates a better availability and effectiveness on processing multi-GNSSs.

  2. Spurious dispersion effects at FLASH

    International Nuclear Information System (INIS)

    Prat, Eduard

    2009-07-01

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  3. Flash x-ray cinematography

    International Nuclear Information System (INIS)

    Stein, W.E.

    1976-01-01

    Experiments intended to provide an overview of the potential capabilities and limitations of flash x-ray cinematography as a diagnostic technique for a Fast Reactor Safety Test Facility are described. The results provide estimates of the x-ray pulse intensity required to obtain adequate radiographs of an array of fuel pins in a typical reactor configuration. An estimate of the upper limit on the pulse duration imposed by the reactor background radiation was also determined. X-ray cinematography has been demonstrated at a repetition rate limited only by the recording equipment on hand at the time of these measurements. These preliminary results indicate that flash x-ray cinematography of the motion of fuel in a Fast Reactor Test Facility is technically feasible

  4. Spurious dispersion effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Prat, Eduard

    2009-07-15

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  5. Multidetector row computed tomography of acute pancreatitis: Utility of single portal phase CT scan in short-term follow up

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Yongwonn [Department of Radiology, Konkuk University Medical Center, 4-12, Hwayang-dong, Gwangjin-gu, Seoul 143-729 (Korea, Republic of); Park, Hee Sun, E-mail: heesun.park@gmail.com [Department of Radiology, Konkuk University Medical Center, 4-12, Hwayang-dong, Gwangjin-gu, Seoul 143-729 (Korea, Republic of); Kim, Young Jun; Jung, Sung Il; Jeon, Hae Jeong [Department of Radiology, Konkuk University Medical Center, 4-12, Hwayang-dong, Gwangjin-gu, Seoul 143-729 (Korea, Republic of)

    2012-08-15

    Objective: The purpose of this study is to evaluate the question of whether nonenhanced CT or contrast enhanced portal phase CT can replace multiphasic pancreas protocol CT in short term monitoring in patients with acute pancreatitis. Materials and methods: This retrospective study was approved by the Institutional Review Board. From April 2006 to May 2010, a total of 52 patients having acute pancreatitis who underwent initial dual phase multidetector row CT (unenhanced, arterial, and portal phase) at admission and a short term (within 30 days) follow up dual phase CT (mean interval 10.3 days, range 3-28 days) were included. Two abdominal radiologists performed an independent review of three sets of follow up CT images (nonenhanced scan, single portal phase scan, and dual phase scan). Interpretation of each image set was done with at least 2-week interval. Radiologists evaluated severity of acute pancreatitis with regard to pancreatic inflammation, pancreatic necrosis, and extrapancreatic complication, based on the modified CT severity index. Scores of each image set were compared using a paired t-test and interobserver agreement was evaluated using intraclass correlation coefficient statistics. Results: Mean scores of sum of CT severity index on nonenhanced scan, portal phase scan, and dual phase scan were 5.7, 6.6, and 6.5 for radiologist 1, and 5.0, 5.6, and 5.8 for radiologist 2, respectively. In both radiologists, contrast enhanced scan (portal phase scan and dual phase scan) showed significantly higher severity score compared with that of unenhanced scan (P < 0.05), while portal phase and dual phase scan showed no significant difference each other. The trend was similar regarding pancreatic inflammation and extrapancreatic complications, in which contrast enhanced scans showed significantly higher score compared with those of unenhanced scan, while no significant difference was observed between portal phase scan and dual phase scan. In pancreatic necrosis

  6. A single early life seizure impairs short-term memory but does not alter spatial learning, recognition memory, or anxiety

    Science.gov (United States)

    Cornejo, Brandon J.; Mesches, Michael H.; Benke, Timothy A.

    2008-01-01

    The impact of a single seizure on cognition remains controversial. We hypothesized that a single early life seizure (sELS) on rat post-natal day (P) 7 would alter only hippocampal-dependent learning and memory in mature (P60) rats. The Morris Water Maze (MWM), Novel Object and Novel Place Recognition (NOR/NPR) tasks, and Contextual Fear Conditioning (CFC) were used to assess learning and memory associated with hippocampal/prefrontal cortex, perirhinal/hippocampal cortex, and amygdala function, respectively. The Elevated Plus Maze (EPM) and Open Field Test (OFT) were used to assess anxiety associated with the septum. We report that sELS impaired hippocampal-dependent short-term memory but not spatial learning or recall. sELS did not disrupt performance in the NOR/NPR. CFC performance suggested intact amydgala function. sELS did not change anxiety levels as measured by the EPM or OFT. Our data suggests that the long-term cognitive impacts of sELS are largely limited to the hippocampus/prefrontal cortex. PMID:18678283

  7. Hot flashes and sleep in women.

    Science.gov (United States)

    Moe, Karen E

    2004-12-01

    Sleep disturbances during menopause are often attributed to nocturnal hot flashes and 'sweats' associated with changing hormone patterns. This paper is a comprehensive critical review of the research on the relationship between sleep disturbance and hot flashes in women. Numerous studies have found a relationship between self-reported hot flashes and sleep complaints. However, hot flash studies using objective sleep assessment techniques such as polysomnography, actigraphy, or quantitative analysis of the sleep EEG are surprisingly scarce and have yielded somewhat mixed results. Much of this limited evidence suggests that hot flashes are associated with objectively identified sleep disruption in at least some women. At least some of the negative data may be due to methodological issues such as reliance upon problematic self-reports of nocturnal hot flashes and a lack of concurrent measures of hot flashes and sleep. The recent development of a reliable and non-intrusive method for objectively identifying hot flashes during the night should help address the need for substantial additional research in this area. Several areas of clinical relevance are described, including the effects of discontinuing combined hormone therapy (estrogen plus progesterone) or estrogen-only therapy, the possibility of hot flashes continuing for many years after menopause, and the link between hot flashes and depression.

  8. A case of shadow flicker/flashing: assessment and solution

    International Nuclear Information System (INIS)

    Clarke, A.D.

    1991-01-01

    A short study was carried out investigating a reported problem of shadow flicker and flashing from the blades of a turbine. The incidence of this phenomenon was confirmed and the duration and frequency of occurrence assessed. The shadow flicker period would be short and only occur at certain times, but could cause irritation. A device to stop the turbine when shadow flicker occurred was recommended and is described. A recommendation was made that turbines should be sited at least ten diameters distance from habitations, and more if sited to the East/Southwest, and the shadow path identified. (author)

  9. A parametric multivariate drought index and its application in the attribution and projection of flash drought change in China

    Science.gov (United States)

    Yuan, X.; Wang, L.; Zhang, M.

    2017-12-01

    Rainfall deficit in the crop growing seasons is usually accompanied by heat waves. Abnormally high temperature increases evapotranspiration and decreases soil moisture rapidly, and ultimately results in a type of drought with a rapid onset, short duration but devastating impact, which is called "Flash drought". With the increase in global temperature, flash drought is expected to occur more frequently. However, there is no consensus on the definition of flash drought so far. Moreover, large uncertainty exists in the estimation of the flash drought and its trend, and the underlying mechanism for its long-term change is not clear. In this presentation, a parametric multivariate drought index that characterizes the joint probability distribution of key variables of flash drought will be developed, and the historical changes in flash drought over China will be analyzed. In addition, a set of land surface model simulations driven by IPCC CMIP5 models with different forcings and future scenarios, will be used for the detection and attribution of flash drought change. This study is targeted at quantifying the influences of natural and anthropogenic climate change on the flash drought change, projecting its future change as well as the corresponding uncertainty, and improving our understanding of the variation of flash drought and its underlying mechanism in a changing climate.

  10. Two types of flash drought over China and their connections with sub-seasonal to seasonal soil moisture drought

    Science.gov (United States)

    Wang, L.; Yuan, X.; Xie, Z.

    2017-12-01

    Flash drought has been receiving attention recently due to its rapid development and vast damage on crops in the growing season. Accompanied with heatwave and rainfall deficit, the soil moisture decreased rapidly in a short time and may lead to the failure of root water uptake and large-scale crops wither. There are two types of flash droughts according to the causes (Mo and Lettenmaier, 2016), i.e., heat wave flash drought and rainfall deficit flash drought. Here, based on pentad-mean surface air temperature and precipitation observations from over two thousand meteorological stations as well as soil moisture and ET estimations from three global reanalysis products, the characteristics and evolution of the two types of flash droughts over China are being explored. Heat wave flash drought is more likely to occur in humid and semi-humid areas, such as southern China, while rainfall deficit flash drought is more likely to occur in northern China. Unlike the traditional drought that persists for a few months to decades, the mean durations of both types of flash droughts are very short. We use monthly mean soil moisture to calculate sub-seasonal to seasonal (S2S) soil moisture drought, and compare its characteristics and preferred conditions such as the large-scale atmospheric circulation and oceanic anomaly for both types of flash droughts. The percentages of flash drought in different periods of S2S drought are also being explored to see the potential relationship between flash drought and S2S drought over different regions.

  11. Production of bio-oils from wood by flash pyrolysis; Herstellung von Bio-Oelen aus Holz in einer Flash-Pyrolyseanlage

    Energy Technology Data Exchange (ETDEWEB)

    Meier, D.; Ollesch, T. [Bundesforschungsanstalt fuer Forst- und Holzwirtschaft, Hamburg (Germany). Inst. fuer Holzchemie und Chemische Technologie des Holzes; Gerdes, C.; Kaminsky, W. [Hamburg Univ. (Germany). Inst. fuer Technische und Makromolekulare Chemie (ITMCh)

    1998-09-01

    Flash pyrolysis is a medium-temperature process (around 475 C) in which biomass is heated up rapidly in the absence of oxygen. The pyrolysis products are cooled down rapidly, condensing into a reddish-brown liquid with around half the calorific value of a conventional heating oil. In contrast to conventional charcoal production, flash pyrolysis is a modern process whose process parameters enure high liquid yields. Modern fluidized-bed reactors for flash pyrolysis of biomass tend to have high heating rates and short times of residue. In the `Hamburg process`, fluidized-bed reactors are used successfully for pyrolysis of plastics. A flash pyrolysis plant for biomass treatment was constructed in cooperation with Hamburg University with funds provided by the `Bundesstiftung Umwelt`. This contribution describes the first series of experiments, mass balances and oil analyses using beech wood as material to be pyrolyzed. (orig./SR) [Deutsch] Flash-Pyrolyse ist ein Mitteltemperatur-Prozess (ca. 475 C), in dem Biomasse unter Sauerstoffausschluss sehr schnell erhitzt wird. Die entstehenden Pyrolyseprodukte werden schnell abgekuehlt und kondensieren zu einer roetlich-braunen Fluessigkeit, die etwa die Haelfte des Heizwertes eines konventionellen Heizoeles besitzt. Flash-Pyrolyse ist, im Gegensatz zur konventionellen Holzverkohlung, ein modernes Verfahren, dessen spezielle Verfahrensparameter hohe Fluessigausbeuten ermoeglichen. Hohe Aufheizraten, verbunden mit kurzen Verweilzeiten, werden mit stationaeren Wirbelbettreaktoren erzielt die gegenwaertig vorwiegend fuer die Flash-Pyrolyse von Biomasse eingesetzt werden. Im `Hamburger Verfahren` haben sich Wirbelbettreaktoren im Bereich der Kunststoffpyrolyse bewaehrt. Daher wurde in Zusammenarbeit mit der Universitaet Hamburg und finanzieller Foerderung der Bundesstiftung Umwelt eine Flash-Pyrolyseanlage fuer Biomasse gebaut: In dieser Arbeit werden erste Versuchsreihen, Massenbilanzen und Oelanalysen aus der Pyrolyse von

  12. Construction and performance of large flash chambers

    International Nuclear Information System (INIS)

    Taylor, F.E.; Bogert, D.; Fisk, R.; Stutte, L.; Walker, J.K.; Wolfson, J.; Abolins, M.; Ernwein, J.; Owen, D.; Lyons, T.

    1979-01-01

    The construction and performance of 12' x 12' flash chambers used in a 340 ton neutrino detector under construction at Fermilab is described. The flash chambers supply digital information with a spatial resolution of 0.2'', and are used to finely sample the shower development of the reaction products of neutrino interactions. The flash chambers are easy and inexpensive to build and are electronically read out

  13. A Durable Flash Memory Search Tree

    OpenAIRE

    Clay III, James; Wortman, Kevin

    2012-01-01

    We consider the task of optimizing the B-tree data structure, used extensively in operating systems and databases, for sustainable usage on multi-level flash memory. Empirical evidence shows that this new flash memory tree, or FM Tree, extends the operational lifespan of each block of flash memory by a factor of roughly 27 to 70 times, while still supporting logarithmic-time search tree operations.

  14. Flash Extraction and Physicochemical Characterization of Oil from Elaeagnus mollis Diels Seeds.

    Science.gov (United States)

    Kan, Lina; Wang, Lin; Ding, Qingzhen; Wu, Yanwen; Ouyang, Jie

    2017-04-03

    A flash extraction method was used to isolate Elaeagnus mollis oil (EMO). The optimal extraction parameters, sample/solvent ratio and extraction temperature, were determined to be 1:10 (g/mL) and 40°C, respectively. Especially, the extraction yield reached 49.30% when the extraction time was as short as 2 min. No obvious difference was observed in fatty acid composition, iodine value, saponification number, total phenolic content and tocopherol content between flash-extracted EMO and Soxhlet-extracted EMO, but their physicochemical values were lower than those of cold-pressed EMO. Cold-pressed EMO had higher oxidation stability, DPPH (1-diphenyl-2-picrylhydrazyl) and hydroxyl radical-scavenging activities than flash-extracted EMO and Soxlet extracted EMO. The flash extraction is demonstrated to be an alternative, efficient method for the vegetable oil production.

  15. Flash CS5 The Missing Manual

    CERN Document Server

    Grover, Chris

    2010-01-01

    Once you know how to use Flash, you can create everything from simple animations to high-end desktop applications, but it's a complex tool that can be difficult to master on your own-unless you have this Missing Manual. This book will help you learn all you need to know about Flash CS5 to create animations that bring your ideas to life. Learn animation basics. Find everything you need to know to get started with FlashMaster the Flash tools. Learn the animation and effects toolset, with clear explanations and hands-on examplesUse 3D effects. Rotate and put objects in motion in three dimensions

  16. Search Engine Optimization for Flash Best Practices for Using Flash on the Web

    CERN Document Server

    Perkins, Todd

    2009-01-01

    Search Engine Optimization for Flash dispels the myth that Flash-based websites won't show up in a web search by demonstrating exactly what you can do to make your site fully searchable -- no matter how much Flash it contains. You'll learn best practices for using HTML, CSS and JavaScript, as well as SWFObject, for building sites with Flash that will stand tall in search rankings.

  17. A Novel Dual Traffic/Flash Flood Monitoring System Using Passive Infrared/Ultrasonic Sensors

    KAUST Repository

    Mousa, Mustafa

    2015-10-19

    Floods are the most common type of natural disaster, causing thousands of casualties every year. Among these events, urban flash floods are particularly deadly because of the short timescales on which they occur, and because of the high concentration of population in cities. Since most flash flood casualties are caused by a lack of information, it is critical to generate accurate and detailed warnings of flash floods. However, deploying an infrastructure that solely monitor flash floods makes little economic sense, since the average periodicity of catastrophic flash floods exceeds the lifetime of a typical sensor network. To address this issue, we propose a new sensing device that can simultaneously monitor urban flash floods and another phenomenon of interest (traffic congestion on the present case). This sensing device is based on the combination of an ultrasonic rangefinder with one or multiple remote temperature sensors. We show an implementation of this device, and illustrate its performance in both traffic flow and flash flood sensing. Field data shows that the sensor can detect vehicles with a 99% accuracy, in addition to estimating their speed and classifying them in function of their length. The same sensor can also monitor urban water levels with an accuracy of less than 2 cm. Two of the sensors have been deployed in a flood prone area, where they captured the only (minor) flash flood that occurred over the one-year test period, with no false detection, and an agreement in the estimated water level estimate (during the flash flood event) of about 2 cm.

  18. Determination of single nucleotide variants in Escherichia coli DH5α by using short-read sequencing.

    Science.gov (United States)

    Song, Yoseb; Lee, Bo-Rahm; Cho, Suhyung; Cho, Yoo-Bok; Kim, Seon-Won; Kang, Taek Jin; Kim, Sun Chang; Cho, Byung-Kwan

    2015-06-01

    Escherichia coli DH5α is a common laboratory strain that provides an important platform for routine use in cloning and synthetic biology applications. Many synthetic circuits have been constructed and successfully expressed in E. coli DH5α; however, its genome sequence has not been determined yet. Here, we determined E. coli DH5α genome sequence and identified genetic mutations that affect its phenotypic functions by using short-read sequencing. The sequencing results clearly described the genotypes of E. coli DH5α, which aid in further studies using the strain. Additionally, we observed 105 single nucleotide variants (SNVs), 83% of which were detected in protein-coding regions compared to the parental strain E. coli DH1. Interestingly, 23% of the protein-coding regions have mutations in their amino acid residues, whose biological functions were categorized into two-component systems, peptidoglycan biosynthesis and lipopolysaccharide biosynthesis. These results underscore the advantages of E. coli DH5α, which tolerates the components of transformation buffer and expresses foreign plasmids efficiently. Moreover, these SNVs were also observed in the commercially available strain. These data provide the genetic information of E. coli DH5α for its future application in metabolic engineering and synthetic biology. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  19. Measurement of hot flashes by sternal skin conductance and subjective hot flash report in Puebla, Mexico.

    Science.gov (United States)

    Sievert, Lynnette Leidy; Freedman, Robert R; Garcia, Jesus Zarain; Foster, Jennifer W; del Carmen Romano Soriano, Ma; Longcope, Christopher; Franz, Charlene

    2002-01-01

    To measure hot flashes by sternal skin conductance in an urban Mexican population and to determine variables associated with hot flash reporting and measurement. From June 1999 to August 2000, 67 perimenopausal women aged 40 to 65 years participated in interviews, anthropometric measures, and a 2-h recording of sternal skin conductance. Changes in sweating were used to demonstrate the presence/absence of a hot flash. During the test, women were asked to report if they experienced a hot flash. During the study period, 10 women reported and demonstrated every hot flash, 24 women never reported or demonstrated a hot flash, 7 demonstrated hot flashes but did not report any of them, 7 reported hot flashes but did not demonstrate any of them, and 19 showed a mixture of responses. Women who demonstrated hot flashes by sternal skin conductance were measured in a warmer room, had more years of education, consumed more eggs as a child, recalled a heavier weight at age 18, and had a lower body mass index at interview compared with women who did not demonstrate hot flashes by sternal skin conductance. Women who subjectively reported hot flashes were measured in a warmer room, were more likely to be postmenopausal, reported more frequent consumption of coffee, and spent fewer months breast-feeding their last child compared with women who did not report the experience of hot flashes during the testing period. Room temperature explained part of the variation between women who did and did not demonstrate hot flashes via sternal skin conductance, between women who did and did not report the experience of hot flashes, and between women who did and did not demonstrate concordance in objective and subjective measures. In addition to room temperature, coffee intake, months spent breast-feeding the last child, and recalled weight at age 18 were important variables predicting hot flash experience.

  20. Rh-flash acquisition card

    International Nuclear Information System (INIS)

    Bourrion, O.

    2003-01-01

    The rh-flash card main purpose is to convert and store the image of the analog data present at input into an output buffer, namely in a given timing window besides a stop signal (like a digital oscilloscope). It is conceived in VME format 1U wide with an additional connector. Novelty of this card is its ability to sample at a high frequency, due to flash coders, and this at a high repetition rate. To do that the card allows the storage of the data considered 'useful' and that is done by storing only the data exceeding a certain threshold. This can be useful for instance for viewing peaks in a spectrum, and obtaining their relative location. The goal is to stock and process the data sampled before and after the arrival of a stop signal (what entails a storage depth). A threshold is defined and any peak exceeding its level will really be stored in the output buffer which is readable through the VME bus. The peak values will be stored as well as m preceding and n subsequent values (both programmable). Obviously, if the threshold is zero the system of data processing is off and all data will be stored. The document is structured on six sections titled: 1. Description; 2. Specifications; 3. Explaining the design of channels; 4. Explaining the shared part of the design; 5. Addressing (→ user guide); 6. Software precautions. (author)

  1. Report on in-situ studies of flash sintering of uranium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Raftery, Alicia Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-24

    Flash sintering is a novel type of field assisted sintering that uses an electric field and current to provide densification of materials on very short time scales. The potential for field assisted sintering techniques to be used in producing nuclear fuel is gaining recognition due to the potential economic benefits and improvements in material properties. The flash sintering behavior has so far been linked to applied and material parameters, but the underlying mechanisms active during flash sintering have yet to be identified. This report summarizes the efforts to investigate flash sintering of uranium dioxide using dilatometer studies at Los Alamos National Laboratory and two separate sets of in-situ studies at Brookhaven National Laboratory’s NSLS-II XPD-1 beamline. The purpose of the dilatometer studies was to understand individual parameter (applied and material) effects on the flash behavior and the purpose of the in-situ studies was to better understand the mechanisms active during flash sintering. As far as applied parameters, it was found that stoichiometry, or oxygen-to-metal ratio, has a significant effect on the flash behavior (time to flash and speed of flash). Composite systems were found to have degraded sintering behavior relative to pure UO2. The critical field studies are complete for UO2.00 and will be analyzed against an existing model for comparison. The in-situ studies showed that the strength of the field and current are directly related to the sample temperature, with temperature-driven phase changes occurring at high values. The existence of an ‘incubation time’ has been questioned, due to a continuous change in lattice parameter values from the moment that the field is applied. Some results from the in-situ experiments, which should provide evidence regarding ion migration, are still being analyzed. Some preliminary conclusions can be made from these results with regard to using field assisted sintering to

  2. On multiphase negative flash for ideal solutions

    DEFF Research Database (Denmark)

    Yan, Wei; Stenby, Erling Halfdan

    2012-01-01

    There is a recent interest to solve multiphase negative flash problems where the phase amounts can be negative for normal positive feed composition. Solving such a negative flash problem using successive substitution needs an inner loop for phase distribution calculation at constant fugacity...

  3. FLASH Interface; a GUI for managing runtime parameters in FLASH simulations

    Science.gov (United States)

    Walker, Christopher; Tzeferacos, Petros; Weide, Klaus; Lamb, Donald; Flocke, Norbert; Feister, Scott

    2017-10-01

    We present FLASH Interface, a novel graphical user interface (GUI) for managing runtime parameters in simulations performed with the FLASH code. FLASH Interface supports full text search of available parameters; provides descriptions of each parameter's role and function; allows for the filtering of parameters based on categories; performs input validation; and maintains all comments and non-parameter information already present in existing parameter files. The GUI can be used to edit existing parameter files or generate new ones. FLASH Interface is open source and was implemented with the Electron framework, making it available on Mac OSX, Windows, and Linux operating systems. The new interface lowers the entry barrier for new FLASH users and provides an easy-to-use tool for experienced FLASH simulators. U.S. Department of Energy (DOE), NNSA ASC/Alliances Center for Astrophysical Thermonuclear Flashes, U.S. DOE NNSA ASC through the Argonne Institute for Computing in Science, U.S. National Science Foundation.

  4. Single-Chip Fully Integrated Direct-Modulation CMOS RF Transmitters for Short-Range Wireless Applications

    Directory of Open Access Journals (Sweden)

    M. Jamal Deen

    2013-08-01

    Full Text Available Ultra-low power radio frequency (RF transceivers used in short-range application such as wireless sensor networks (WSNs require efficient, reliable and fully integrated transmitter architectures with minimal building blocks. This paper presents the design, implementation and performance evaluation of single-chip, fully integrated 2.4 GHz and 433 MHz RF transmitters using direct-modulation power voltage-controlled oscillators (PVCOs in addition to a 2.0 GHz phase-locked loop (PLL based transmitter. All three RF transmitters have been fabricated in a standard mixed-signal CMOS 0.18 µm technology. Measurement results of the 2.4 GHz transmitter show an improvement in drain efficiency from 27% to 36%. The 2.4 GHz and 433 MHz transmitters deliver an output power of 8 dBm with a phase noise of −122 dBc/Hz at 1 MHz offset, while drawing 15.4 mA of current and an output power of 6.5 dBm with a phase noise of −120 dBc/Hz at 1 MHz offset, while drawing 20.8 mA of current from 1.5 V power supplies, respectively. The PLL transmitter delivers an output power of 9 mW with a locking range of 128 MHz and consumes 26 mA from 1.8 V power supply. The experimental results demonstrate that the RF transmitters can be efficiently used in low power WSN applications.

  5. Gone in a Flash: Manipulation of Audiovisual Temporal Integration Using Transcranial Magnetic Stimulation

    Directory of Open Access Journals (Sweden)

    Roy eHamilton

    2013-09-01

    Full Text Available While converging evidence implicates the right inferior parietal lobule in audiovisual integration, its role has not been fully elucidated by direct manipulation of cortical activity. Replicating and extending an experiment initially reported by Kamke, Vieth, Cottrell, and Mattingley (2012, we employed the sound-induced flash illusion, in which a single visual flash, when accompanied by two auditory tones, is misperceived as multiple flashes (Wilson, 1987; Shams, et al., 2000. Slow repetitive (1Hz TMS administered to the right angular gyrus, but not the right supramarginal gyrus, induced a transient decrease in the Peak Perceived Flashes (PPF, reflecting reduced susceptibility to the illusion. This finding independently confirms that perturbation of networks involved in multisensory integration can result in a more veridical representation of asynchronous auditory and visual events and that cross-modal integration is an active process in which the objective is the identification of a meaningful constellation of inputs, at times at the expense of accuracy.

  6. Straightforward dimensionless experimental formulae for flash point of binary mixtures of two flammable components

    Directory of Open Access Journals (Sweden)

    Hristova Mariana

    2012-01-01

    Full Text Available Dimensionless experimental formulae based on a rational reciprocal function for correlation of flashpoint data of binary mixtures of two flammable components have been developed. The formulae are based on data obtained from flash-point experiments. The proposed approach requires only two coefficients, molar fraction of components and flashpoint temperatures of the pure flammable components to be known in advance. Literature data were used for formulae verification and validation obtained results indicate that accuracy is comparable and to some extent better than that of conventional flash point prediction models. Dimensional analysis and scaling of data have been performed in order to define the correct construction of the equation fitting flash-point data in dimensionless form using the independent variables suggested by Catoire. Stefan number relevant flash-point of a single compound or a blend has been defined.

  7. Flash characteristics of plasma induced by hypervelocity impact

    Science.gov (United States)

    Zhang, Kai; Long, Renrong; Zhang, Qingming; Xue, Yijiang; Ju, Yuanyuan

    2016-08-01

    Using a two-stage light gas gun, a series of hypervelocity impact experiments was conducted in which 6.4-mm-diameter spherical 2024-aluminum projectiles impact 23-mm-thick targets made of the same material at velocities of 5.0, 5.6, and 6.3 km/s. Both an optical pyrometer composed of six photomultiplier tubes and a spectrograph were used to measure the flash of the plasma during hypervelocity impact. Experimental results show that, at a projectile velocity of 6.3 km/s, the strong flash lasted about 10 μs and reached a temperature of 4300 K. Based on the known emission lines of AL I, spectral methods can provide the plasma electron temperature. An electron-temperature comparison between experiment and theoretical calculation indicates that single ionization and secondary ionization are the two main ionizing modes at velocities 5.0-6.3 km/s.

  8. FlaME: Flash Molecular Editor - a 2D structure input tool for the web

    Directory of Open Access Journals (Sweden)

    Dallakian Pavel

    2011-02-01

    Full Text Available Abstract Background So far, there have been no Flash-based web tools available for chemical structure input. The authors herein present a feasibility study, aiming at the development of a compact and easy-to-use 2D structure editor, using Adobe's Flash technology and its programming language, ActionScript. As a reference model application from the Java world, we selected the Java Molecular Editor (JME. In this feasibility study, we made an attempt to realize a subset of JME's functionality in the Flash Molecular Editor (FlaME utility. These basic capabilities are: structure input, editing and depiction of single molecules, data import and export in molfile format. Implementation The result of molecular diagram sketching in FlaME is accessible in V2000 molfile format. By integrating the molecular editor into a web page, its communication with the HTML elements on this page is established using the two JavaScript functions, getMol( and setMol(. In addition, structures can be copied to the system clipboard. Conclusion A first attempt was made to create a compact single-file application for 2D molecular structure input/editing on the web, based on Flash technology. With the application examples presented in this article, it could be demonstrated that the Flash methods are principally well-suited to provide the requisite communication between the Flash object (application and the HTML elements on a web page, using JavaScript functions.

  9. Impact Flash Physics: Modeling and Comparisons With Experimental Results

    Science.gov (United States)

    Rainey, E.; Stickle, A. M.; Ernst, C. M.; Schultz, P. H.; Mehta, N. L.; Brown, R. C.; Swaminathan, P. K.; Michaelis, C. H.; Erlandson, R. E.

    2015-12-01

    Hypervelocity impacts frequently generate an observable "flash" of light with two components: a short-duration spike due to emissions from vaporized material, and a long-duration peak due to thermal emissions from expanding hot debris. The intensity and duration of these peaks depend on the impact velocity, angle, and the target and projectile mass and composition. Thus remote sensing measurements of planetary impact flashes have the potential to constrain the properties of impacting meteors and improve our understanding of impact flux and cratering processes. Interpreting impact flash measurements requires a thorough understanding of how flash characteristics correlate with impact conditions. Because planetary-scale impacts cannot be replicated in the laboratory, numerical simulations are needed to provide this insight for the solar system. Computational hydrocodes can produce detailed simulations of the impact process, but they lack the radiation physics required to model the optical flash. The Johns Hopkins University Applied Physics Laboratory (APL) developed a model to calculate the optical signature from the hot debris cloud produced by an impact. While the phenomenology of the optical signature is understood, the details required to accurately model it are complicated by uncertainties in material and optical properties and the simplifications required to numerically model radiation from large-scale impacts. Comparisons with laboratory impact experiments allow us to validate our approach and to draw insight regarding processes that occur at all scales in impact events, such as melt generation. We used Sandia National Lab's CTH shock physics hydrocode along with the optical signature model developed at APL to compare with a series of laboratory experiments conducted at the NASA Ames Vertical Gun Range. The experiments used Pyrex projectiles to impact pumice powder targets with velocities ranging from 1 to 6 km/s at angles of 30 and 90 degrees with respect to

  10. Long-term outcomes of short dental implants supporting single crowns in posterior region: a clinical retrospective study of 5-10 years.

    Science.gov (United States)

    Lai, Hong-Chang; Si, Mi-Si; Zhuang, Long-Fei; Shen, Hui; Liu, Yue-Lian; Wismeijer, Daniel

    2013-02-01

    Aimed to evaluate the long-term clinical and radiographic outcomes of short implants supporting single crowns in the posterior regions. A retrospective study design was adopted. The clinical and radiographic data of 231 short implants (intra-bony length ≤8 mm) supporting single crowns in 168 patients, were collected after 5-10 (mean 7.22) years' follow-up. Implant and prosthesis failures, peri-implant marginal bone loss, biological and technical complications were evaluated. The influence factors on implant failure were studied. In total 4 implants and 11 prostheses failed. The 10-year (5-year) cumulative survival rate was 98.3% (98.7%) for implant-based analysis and 97.6% (98.2%) for patient-based analysis. The short implants placed in type IV bone yielded more failures than in type I-III and presented a survival rate of 94.0%. The 10-year survival rate of the prostheses was 95.2%. The mean marginal bone loss between implant installation and the 10 years' follow-up visit was 0.63 ± 0.68 mm. The marginal bone loss between the first and 5th year was minimal (0.05 ± 0.10mm and not statistically significant). 18 (7.8%) implants were exposed to biological complications, whereas 29 (12.6%) implants were involved in technical complications. High survival rates for both the implants and the prostheses could be achieved after 5-10 years for short implants supporting single crowns, without severe marginal bone loss and complications. One may conclude that a single crown supported by a short implant is a predictable treatment modality. However, short implants in type IV bone sites should be applied with caution. © 2012 John Wiley & Sons A/S.

  11. The SWARF high energy flash X-ray facility

    International Nuclear Information System (INIS)

    Gilbert, J.F.; Dove, E.W.D.

    1976-06-01

    A description is presented of the SWARF flash radiography facility at AWRE Foulness, which is stated to be the most powerful flash x-ray system available, in the U.K. The machine consists essentially of a Marx generator, a coaxial Blumlein system and an x-ray tube. The voltage output from the Marx generator (about 2.5 MV from an 80 kV input) is applied to a large re-entrant Blumlein pulse-forming line. Near maximum voltage, an adjustable oil switch short-circuits one end of the Blumlein generator and so applies a square voltage pulse of 65 ns duration to the x-ray tube. The x-rays are produced from a tantalum target which forms the anode of a vacuum field emission diode. The facility consists of two field machines positioned so that radiographs can be obtained from different angles. The description is given under the following heads: modus operandi; constructional details; oil installation; electrical details; commissioning, calibration and electrical data; flash radiography in explosives research; operational control of facility, film packs; radiographic results; further developments; overall performance. (U.K.)

  12. Detection and spectral measurements of coherent synchrotron radiation at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, Christopher

    2010-02-15

    The operation of high-gain free-electron laser (FEL) underlies tremendous demands on high quality electron beams with high peak currents. At the Free-Electron-Laser in Hamburg (FLASH), two magnetic bunch compressors are used to compress the electron bunches longitudinally. In the bunch compressor magnets, these short electron bunches generate coherent synchrotron radiation (CSR). This CSR contains information on the longitudinal bunch profile, which is relevant for driving an FEL. In order to investigate coherent synchrotron radiation at the second bunch compressor BC3 at FLASH, a new setup behind the last dipole was installed. For the detection of coherent synchrotron radiation, which is emitted in the infrared regime, pyroelectric detectors were used. These pyroelectric detectors have been calibrated at the free-electron laser FELIX in the wavelength range from 5 {mu}m to 110 {mu}m. For characterisation of the emitted radiation, a transverse scanning device was used to measure the transverse intensity distribution. Various transmission filters were used to obtain additional information about the spectral content. In order to get spectral information with high resolution over a wide wavelength range, a rotating mirror spectrometer using reflective blazed gratings was installed. Using this spectrometer, the first spectral measurements of coherent synchrotron radiation at FLASH in a wavelength range from 10 {mu}m to 160 {mu}m were done. (orig.)

  13. A low-voltage flash memory cell utilizing the gate-injection program/erase method with a recessed channel structure

    International Nuclear Information System (INIS)

    Wu Dake; Huang Ru; Wang Pengfei; Tang Poren; Wang Yangyuan

    2008-01-01

    In this paper, a low-voltage recessed channel SONOS flash memory using the gate-injection program/erase method is proposed and investigated for NAND application. It is shown that the proposed flash memory can achieve 8 V lower programming voltage compared with planar flash memory, due to the effective capacitance coupling and the electric-field enhancement by combining the recessed channel structure and the gate-injection program/erase method. In addition, more than 30% larger threshold voltage window and improved short channel effects can be obtained in the proposed flash memory

  14. Does underwater flash photography affect the behaviour, movement and site persistence of seahorses?

    Science.gov (United States)

    Harasti, D; Gladstone, W

    2013-11-01

    The effect of flash photography on seahorse species has never been tested. An experiment was established to test the effect of flash photography and the handling of Hippocampus whitei, a medium-sized seahorse species endemic to Australia, on their behavioural responses, movements and site persistence. A total of 24 H. whitei were utilized in the experiment with eight in each of the three treatments (flash photography, handling and control). The effect of underwater flash photography on H. whitei movements was not significant; however, the effect of handling H. whitei to take a photograph had a significant effect on their short-term behavioural responses to the photographer. Kaplan-Meier log-rank test revealed that there was no significant difference in site persistence of H. whitei from each of the three treatments and that flash photography had no long-term effects on their site persistence. It is concluded that the use of flash photography by divers is a safe and viable technique with H. whitei, particularly if photographs can be used for individual identification purposes. © 2013 The Fisheries Society of the British Isles.

  15. [Nikola Tesla: flashes of inspiration].

    Science.gov (United States)

    Villarejo-Galende, Albero; Herrero-San Martín, Alejandro

    2013-01-16

    Nikola Tesla (1856-1943) was one of the greatest inventors in history and a key player in the revolution that led to the large-scale use of electricity. He also made important contributions to such diverse fields as x-rays, remote control, radio, the theory of consciousness or electromagnetism. In his honour, the international unit of magnetic induction was named after him. Yet, his fame is scarce in comparison with that of other inventors of the time, such as Edison, with whom he had several heated arguments. He was a rather odd, reserved person who lived for his inventions, the ideas for which came to him in moments of inspiration. In his autobiography he relates these flashes with a number of neuropsychiatric manifestations, which can be seen to include migraine auras, synaesthesiae, obsessions and compulsions.

  16. Observations of High Peak Current 'lull' Lightning Flashes

    Science.gov (United States)

    Zhang, Y.; Krehbiel, P. R.; Edens, H. E.; Stock, M.

    2015-12-01

    A new and peculiar type of negative cloud-to-ground (-CG) lightning flash has been found from LMA observations of storms. Called a 'lull' flash, the discharge begins with a short duration (~5-10 ms), stepped leader and high peak current return stroke, followed by a brief period of inactivity. After a few tens to a few hundreds of milliseconds, the discharge reignites in the same location as a normal -CG. VHF observations show a complete lack of activity during the lull. The flashes were first identified from LMA observations during a 2008 lightning study in West Virginia (Krehbiel, 2012 ILDC), but are seen in other normally electrified storms. They are characterized by large negative peak currents (-50 to -150 kA) in NLDN data. Here we report detailed LMA, interferometer, and fast antenna observations of lull flashes obtained at Langmuir Laboratory in 2013. A series of six lull CGs occurred over an 11 min time interval in a small storm on August 5. Analysis of the observations shows the breakdown immediately produced a stepped leader that went straight to ground. The durations from initial breakdown to the return stroke (RS) was 2-15 ms, corresponding to leader speeds of 4×105 to 3×106 m/s. Peak currents of the RSs were -32 to -188 kA. The lulls began 10-29 ms after the RSs, and lasted 40-100 ms before the discharge reignited. By contrast, the durations, speeds and peak current values of the reignited first strokes were those of normal -CGs, namely, 9 to 105 ms, -11.5kA to 55.8kA, and 0.6×105 to 6.7×105 m/s. Further analysis indicates the lull flashes occurred when the storm had substantial negative charge but little lower positive charge, allowing the initial stroke to go straight to ground at a high speed. The energetic stroke somehow quenches the discharge a short time afterward while much negative charge remains, which leads to reignition and the second part of the discharge. Exactly how and why this happens remains an open question.

  17. Frequency upshift via flash ionization phenomena using semiconductor plasma

    Directory of Open Access Journals (Sweden)

    Nishida A.

    2013-11-01

    Full Text Available We have demonstrated frequency upshift in the terahertz region by flash ionization. The magnitude of upshift frequency is tuned by the laser intensity. A proof of principle experiment has been performed with a plasma creation time scale much shorter than the period of the electromagnetic wave and a plasma length longer than its wavelength. Frequency upshifted from 0.35 to 3.5 THz by irradiating a ZnSe crystal with a ultra-short laser pulse has been observed.

  18. Non Volatile Flash Memory Radiation Tests

    Science.gov (United States)

    Irom, Farokh; Nguyen, Duc N.; Allen, Greg

    2012-01-01

    Commercial flash memory industry has experienced a fast growth in the recent years, because of their wide spread usage in cell phones, mp3 players and digital cameras. On the other hand, there has been increased interest in the use of high density commercial nonvolatile flash memories in space because of ever increasing data requirements and strict power requirements. Because of flash memories complex structure; they cannot be treated as just simple memories in regards to testing and analysis. It becomes quite challenging to determine how they will respond in radiation environments.

  19. Flash memory in embedded Java programs

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs

    This paper introduces a Java execution environment with the capability for storing constant heap data in Flash, thus saving valuable RAM. The extension is motivated by the structure of three industrial applications which demonstrate the need for storing constant data in Flash on small embedded...... devices. The paper introduces the concept of host initialization of constant data to prepare a Flash image of constant data that can be kept outside the heap during runtime. The concept is implemented in an interpreter based Java execution environment....

  20. Flash memory in embedded Java programs

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs

    2011-01-01

    This paper introduces a Java execution environment with the capability for storing constant heap data in Flash, thus saving valuable RAM. The extension is motivated by the structure of three industrial applications which demonstrate the need for storing constant data in Flash on small embedded...... devices. The paper introduces the concept of host initialization of constant data to prepare a Flash image of constant data that can be kept outside the heap during runtime. The concept is implemented in an interpreter based Java execution environment....

  1. The character and causes of flash flood occurrence changes in mountainous small basins of Southern California under projected climatic change

    Directory of Open Access Journals (Sweden)

    Theresa M. Modrick

    2015-03-01

    Full Text Available Study region: Small watersheds (O[25 km2] in the mountain regions of southern California comprise the study region. Study focus: This paper examines changes in flash flood occurrence in southern California resulting from projected climatic change. The methodology synthesizes elements of meteorological modeling, hydrology and geomorphology into an integrated modeling approach to define flash flood occurrence in a systematic and consistent way on a regional basis with high spatial and temporal resolution appropriate for flash flooding. A single climate model with three-dimensional atmospheric detail was used as input to drive simulations for historical and future periods. New hydrological insights for the region: Results indicate an increase in flash flood occurrence for the study region. For two distributed hydrologic models employed, the increase in flash flood occurrence frequency is on average between 30% and 40%. Regional flash flood occurrence is characterized by near saturation of the upper soil layer, and wider ranges in lower soil layer saturation and in precipitation. Overall, a decrease in the total number of precipitation events was found, although with increased precipitation intensity, increased event duration, and higher soil saturation conditions for the 21st century. This combination could signify more hazardous conditions, with fewer precipitation events but higher rainfall intensity and over soils with higher initial soil moisture saturation, leading to more frequent occurrence of flash floods. Keywords: Flash flooding, Climate change, Soil moisture, Precipitation, Distributed hydrologic modeling

  2. Formation of In x Ga1-x As nanocrystals in thin Si layers by ion implantation and flash lamp annealing

    Science.gov (United States)

    Wutzler, Rene; Rebohle, Lars; Prucnal, Slawomir; Grenzer, Jörg; Hübner, René; Böttger, Roman; Skorupa, Wolfgang; Helm, Manfred

    2017-06-01

    The integration of high-mobility III-V compound semiconductors emerges as a promising route for Si device technologies to overcome the limits of further down-scaling. In this paper, a non-conventional approach of the combination of ion beam implantation with short-time flash lamp annealing is employed to fabricate In x Ga1-x As nanocrystals and to study their crystallization process in thin Si layers. The implantation fluence ratio of Ga and In ions has been varied to tailor the final nanocrystal composition. Raman spectroscopy and x-ray diffraction analyses verify the formation of ternary III-V nanocrystals within the Si layer. Transmission electron microscopy reveals single-crystalline precipitates with a low number of defects. A liquid epitaxy mechanism is used to describe the formation process of III-V nanocrystals after melting of the implanted thin Si layer by flash lamp annealing. The fabricated In x Ga1-x As nanocrystals are mainly Ga-rich with respect to the implanted Ga/In ratio.

  3. Time Correlations of Lightning Flash Sequences in Thunderstorms Revealed by Fractal Analysis

    Science.gov (United States)

    Gou, Xueqiang; Chen, Mingli; Zhang, Guangshu

    2018-01-01

    By using the data of lightning detection and ranging system at the Kennedy Space Center, the temporal fractal and correlation of interevent time series of lightning flash sequences in thunderstorms have been investigated with Allan factor (AF), Fano factor (FF), and detrended fluctuation analysis (DFA) methods. AF, FF, and DFA methods are powerful tools to detect the time-scaling structures and correlations in point processes. Totally 40 thunderstorms with distinguishing features of a single-cell storm and apparent increase and decrease in the total flash rate were selected for the analysis. It is found that the time-scaling exponents for AF (αAF) and FF (αFF) analyses are 1.62 and 0.95 in average, respectively, indicating a strong time correlation of the lightning flash sequences. DFA analysis shows that there is a crossover phenomenon—a crossover timescale (τc) ranging from 54 to 195 s with an average of 114 s. The occurrence of a lightning flash in a thunderstorm behaves randomly at timescales τc but shows strong time correlation at scales >τc. Physically, these may imply that the establishment of an extensive strong electric field necessary for the occurrence of a lightning flash needs a timescale >τc, which behaves strongly time correlated. But the initiation of a lightning flash within a well-established extensive strong electric field may involve the heterogeneities of the electric field at a timescale τc, which behave randomly.

  4. Characteristics of cloud-to-ground lightning flashes over Sweden

    International Nuclear Information System (INIS)

    Sonnadara, Upul; Cooray, Vernon; Goetschl, Thomas

    2006-01-01

    A detailed study of the characteristics of cloud-to-ground (CG) lightning flashes over Sweden was carried out for the period 1987-2000 using data obtained from the Swedish lightning-locating network. Results are presented by analysing over half a million lightning ground flashes. The average variation of the annual mean of the total number of flashes was found to be 37%. About 12% of the CG flashes were positive flashes and their average variation about the annual mean was 26%. The average peak currents were fairly constant over the years with variations as little as 4% for negative flashes and 5% for positive flashes. The average peak current values for negative and positive flashes were -29.90 and +63.97 kA respectively. A correlation between the mean monthly flash count and percentage of positive flashes was seen. A similar relationship is seen with the mean monthly flash count and the peak currents for both polarities. In general, high flash density and high peak currents were observed in the southern part of Sweden where most of the major cities are located. Flash densities exceeding 0.4 flashes km -2 were observed for several large cities. The maximum flash rate of 32 flashes h -1 within a 10 km radius was seen in Joenkoeping (14.18 0 E, 57.78 0 N) in the province of Smaaland

  5. Flash Point: Evaluation, Experimentation and Estimation

    Science.gov (United States)

    Rowley, J. R.; Freeman, D. K.; Rowley, R. L.; Oscarson, J. L.; Giles, N. F.; Wilding, W. V.

    2010-05-01

    The flash point is an important indicator of the flammability of a chemical. For safety purposes, many data compilations report the lowest value and not the most likely. This practice, combined with improper documentation and poor data storage methods, has resulted in compilations filled with fire-hazard data that are inconsistent with related properties and between members of homologous chemical series. In this study, the flash points reported in the DIPPR® 801 database and more than 1,400 other literature values were critically reviewed based on measurement method, inter-property relations, and trends in chemical series. New measurements for seven compounds illustrate the differences between experimental flash points and data commonly found in fire-hazard compilations. With a critically reviewed set of experimental data, published predictive methods for the flash point were evaluated for accuracy.

  6. Highly Sensitive Flash LADAR Camera, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — A highly sensitive 640 x 480-element flash LADAR camera will be developed that is capable of 100-Hz rates with better than 5-cm range precision. The design is based...

  7. MR colonography with fecal tagging: comparison between 2D turbo FLASH and 3D FLASH sequences

    International Nuclear Information System (INIS)

    Papanikolaou, Nickolas; Grammatikakis, John; Maris, Thomas; Prassopoulos, Panos; Gourtsoyiannis, Nicholas; Lauenstein, Thomas

    2003-01-01

    The objective of this study was to compare inversion recovery turbo 2D fast low-angle shot (FLASH) and 3D FLASH sequences for fecal-tagged MR colonography studies. Fifteen consecutive patients with indications for colonoscopy underwent MR colonography with fecal tagging. An inversion recovery turbo-FLASH sequence was applied and compared in terms of artifacts presence, efficiency for masking residual stool, and colonic wall conspicuity with a fat-saturated 3D FLASH sequence. Both sequences were acquired following administration of paramagnetic contrast agent. Contrast-to-noise ratio and relative contrast between colonic wall and lumen were calculated and compared for both sequences. Turbo 2D FLASH provided fewer artifacts, higher efficiency for masking the residual stool, and colonic wall conspicuity equivalent to 3D FLASH. An inversion time of 10 ms provided homogeneously low signal intensity of the colonic lumen. Contrast to noise between colonic wall and lumen was significantly higher in the 3D FLASH images, whereas differences in relative contrast were not statistically significant. An optimized inversion-recovery 2D turbo-FLASH sequence provides better fecal tagging results and should be added to the 3D FLASH sequence when designing dark-lumen MR colonography examination protocols. (orig.)

  8. Short-range surface plasmonics: Localized electron emission dynamics from a 60-nm spot on an atomically flat single-crystalline gold surface.

    Science.gov (United States)

    Frank, Bettina; Kahl, Philip; Podbiel, Daniel; Spektor, Grisha; Orenstein, Meir; Fu, Liwei; Weiss, Thomas; Horn-von Hoegen, Michael; Davis, Timothy J; Meyer Zu Heringdorf, Frank-J; Giessen, Harald

    2017-07-01

    We experimentally and theoretically visualize the propagation of short-range surface plasmon polaritons using atomically flat single-crystalline gold platelets on silicon substrates. We study their excitation and subfemtosecond dynamics via normal-incidence two-photon photoemission electron microscopy. By milling a plasmonic disk and grating structure into a single-crystalline gold platelet, we observe nanofocusing of the short-range surface plasmon polariton. Localized two-photon ultrafast electron emission from a spot with a smallest dimension of 60 nm is observed. Our novel approach opens the door toward reproducible plasmonic nanofocusing devices, which do not degrade upon high light intensity or heating due to the atomically flat surface without any tips, protrusions, or holes. Our nanofoci could also be used as local emitters for ultrafast electron bunches in time-resolved electron microscopes.

  9. Hydrodynamic simulations of the core helium flash

    Science.gov (United States)

    Mocák, Miroslav; Müller, Ewald; Weiss, Achim; Kifonidis, Konstantinos

    2008-10-01

    We desribe and discuss hydrodynamic simulations of the core helium flash using an initial model of a 1.25 M⊙ star with a metallicity of 0.02 near at its peak. Past research concerned with the dynamics of the core helium flash is inconclusive. Its results range from a confirmation of the standard picture, where the star remains in hydrostatic equilibrium during the flash (Deupree 1996), to a disruption or a significant mass loss of the star (Edwards 1969; Cole & Deupree 1980). However, the most recent multidimensional hydrodynamic study (Dearborn et al. 2006) suggests a quiescent behavior of the core helium flash and seems to rule out an explosive scenario. Here we present partial results of a new comprehensive study of the core helium flash, which seem to confirm this qualitative behavior and give a better insight into operation of the convection zone powered by helium burning during the flash. The hydrodynamic evolution is followed on a computational grid in spherical coordinates using our new version of the multi-dimensional hydrodynamic code HERAKLES, which is based on a direct Eulerian implementation of the piecewise parabolic method.

  10. On Stellar Flash Echoes from Circular Rings

    Science.gov (United States)

    Nemiroff, Robert; Mukherjee, Oindabi

    2018-01-01

    A flash -- or any episode of variability -- that occurs in the vicinity of a circular ring might be seen several times later, simultaneously, as echoes on the ring. Effective images of the flash are created and annihilated in pairs, with as many as four flash images visible concurrently. Videos detailing sequences of image pair creation, tandem motion, and subsequent image annihilation are shown, given simple opacity and scattering assumptions. It is proven that, surprisingly, images from a second pair creation event always annihilate with images from the first. Caustic surfaces between flash locations yielding two and four images are computed. Although such ring echos surely occur, their practical detection might be difficult as it could require dedicated observing programs involving sensitive photometry of extended objects. Potential flash sources include planetary and interstellar gas and dust rings near and around variable stars, flare stars, novae, supernovae, and GRBs. Potentially recoverable information includes size, distance, temporal history, and angular isotropy of both the ring and flash.

  11. Radiation Tests of Highly Scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories - Update 2012

    Science.gov (United States)

    Irom, Farokh; Allen, Gregory R.

    2012-01-01

    The space radiation environment poses a certain risk to all electronic components on Earth-orbiting and planetary mission spacecraft. In recent years, there has been increased interest in the use of high-density, commercial, nonvolatile flash memories in space because of ever-increasing data volumes and strict power requirements. They are used in a wide variety of spacecraft subsystems. At one end of the spectrum, flash memories are used to store small amounts of mission-critical data such as boot code or configuration files and, at the other end, they are used to construct multi-gigabyte data recorders that record mission science data. This report examines single-event effect (SEE) and total ionizing dose (TID) response in single-level cell (SLC) 32-Gb, multi-level cell (MLC) 64-Gb, and Triple-level (TLC) 64-Gb NAND flash memories manufactured by Micron Technology with feature size of 25 nm.

  12. An electronic flash lamp system to replace the traditional explosively driven light source

    Science.gov (United States)

    Stigman, William L.; Kihara, Ronald; Scarpetti, Raymond D.

    2003-07-01

    Electronic flash lamps are being developed at the Lawrence Livermore National Laboratory (LLNL). These lamps are intended to replace the traditional explosively driven Argon-gas filled light sources (Argon candles) that are currently used to provide illumination for high speed rotating mirror-framing cameras. At Livermore, we are developing an electronic flash lamp system that can match or exceed the light output of a traditional Argon candle. These systems utilize a Plasma Arc Lamp developed by PRISM Science Inc of Woburn, MA, USA. In the past, high-speed photography requiring explosively driven light sources were a one-time-only even that destroyed fixtures and optical alignment. The electronic flash lamp system, utilizing the Plasma ArC Lamp, will replace the explosively driven lighting systems and provide the capability to dry run experimental setups and repeat tests without damage to the experimental set-up. The electronic flash lamp system eliminates the problem of collateral damage to the experiment and does not add to the overall amount of explosives needed for single test. Since the Pulsed-Power driver is remotely located, only the flash lamp itself is destroyed when the explosive shot is fired. The flexible geometry of this light source also enables the user to create complex light patterns as well as photograph very large areas with a single lighting system. This electronic flash lamp system will provide an extremely bright, stable, and repeatable light source for rotating-mirror framing cameras operating at one million frames per second, using both black & white or color films. The design of the Pulsed-Power driver and the flash lamp, along with experimental data and results will be discussed.

  13. Application of GaAs and CdTe photoconductor detectors to X-ray flash radiography

    Energy Technology Data Exchange (ETDEWEB)

    Mathy, F.; Cuzin, M.; Gagelin, J.J.; Mermet, R.; Piaget, B.; Rustique, J.; Verger, L. (CEA, Direction des Technologies Avancees, Lab. d' Electronique, de Technologie et d' Instrumentation, DSYS, 38 - Grenoble (France)); Hauducoeur, A.; Nicolas, P.; Le Dain, L.; Hyvernage, M. (CEA, Direction des Applications Militaires, 77 - Courtry (France))

    1992-11-15

    Some insulating GaAs and CdTe:Cl photoconductor probes were qualified on high energy X-ray single-shot flash generators. The estimated minimum detected dose per flash corresponding to a 230 mrad direct beam attenuated by 200 mm lead was 20 [mu]rad. The dynamic range was about 4 decades in amplitude or charge, with a good linearity. Such detectors, by locating the origin of the parasitic scattered beam, could be used to eliminate this parasitic beam in X-ray flash radiography in detonics experiments. Imaging possibilities are mentioned, as well as X-ray generator monitoring with such detectors or with neutron preirradiated photoconductors. (orig.).

  14. Application of GaAs and CdTe photoconductor detectors to x-ray flash radiography

    Energy Technology Data Exchange (ETDEWEB)

    Mathy, F.; Cuzin, M.; Gagelin, J.J.; Mermet, R.; Piaget, B.; Rustique, J.; Verger, L. [CEA Centre d`Etudes de Grenoble, 38 (FR). Direction des Technologies Avancees; Hauducoeur, A.; Nicolas, P.; Le Dain, L.; Hyvernage, M. [CEA Centre d`Etudes de Vaujours, 77 - Courtry (FR)

    1991-12-31

    Semi-insulating GaAs and CdTe:Cl photoconductor probes were qualified on high energy X ray single shot flash generators. The estimated minimum detected dose per flash corresponding to a 230 mrad direct beam attenuated by 200 mm lead was 20 {mu}rad. The dynamic range was about 4 decades in amplitude or charges, with a good linearity. Such detectors, by locating the origin of the parasitic scattered beam, could be used to eliminate this parasitic beam in X ray flash radiography in detonics experiments. Imaging possibilities are mentioned, as well as X ray generator monitoring with such detectors or with neutron preirradiated photoconductors.

  15. Enhanced detection of terrestrial gamma-ray flashes by AGILE.

    Science.gov (United States)

    Marisaldi, M; Argan, A; Ursi, A; Gjesteland, T; Fuschino, F; Labanti, C; Galli, M; Tavani, M; Pittori, C; Verrecchia, F; D'Amico, F; Østgaard, N; Mereghetti, S; Campana, R; Cattaneo, P W; Bulgarelli, A; Colafrancesco, S; Dietrich, S; Longo, F; Gianotti, F; Giommi, P; Rappoldi, A; Trifoglio, M; Trois, A

    2015-11-16

    At the end of March 2015 the onboard software configuration of the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-Ray Flashes (TGFs). The configuration change was highly successful resulting in an increase of one order of magnitude in TGF detection rate. As expected, the largest fraction of the new events has short duration (<100 μs), and part of them has simultaneous association with lightning sferics detected by the World Wide Lightning Location Network. The new configuration provides the largest TGF detection rate surface density (TGFs/km 2 /yr) to date, opening prospects for improved correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region.

  16. Detecting the single line to ground short circuit fault in the submarine’s power system using the artificial neural network

    Directory of Open Access Journals (Sweden)

    Behniafar Ali

    2013-01-01

    Full Text Available The electric marine instruments are newly inserted in the trade and industry, for which the existence of an equipped and reliable power system is necessitated. One of the features of such a power system is that it cannot have an earth system causing the protection relays not to be able to detect the single line to ground short circuit fault. While on the other hand, the occurrence of another similar fault at the same time can lead to the double line fault and thereby the tripping of relays and shortening of vital loads. This in turn endangers the personals' security and causes the loss of military plans. From the above considerations, it is inferred that detecting the single line to ground fault in the marine instruments is of a special importance. In this way, this paper intends to detect the single line to ground fault in the power systems of the marine instruments using the wavelet transform and Multi-Layer Perceptron (MLP neural network. In the numerical analysis, several different types of short circuit faults are simulated on several marine power systems and the proposed approach is applied to detect the single line to ground fault. The results are of a high quality and preciseness and perfectly demonstrate the effectiveness of the proposed approach.

  17. FPGA Flash Memory High Speed Data Acquisition

    Science.gov (United States)

    Gonzalez, April

    2013-01-01

    The purpose of this research is to design and implement a VHDL ONFI Controller module for a Modular Instrumentation System. The goal of the Modular Instrumentation System will be to have a low power device that will store data and send the data at a low speed to a processor. The benefit of such a system will give an advantage over other purchased binary IP due to the capability of allowing NASA to re-use and modify the memory controller module. To accomplish the performance criteria of a low power system, an in house auxiliary board (Flash/ADC board), FPGA development kit, debug board, and modular instrumentation board will be jointly used for the data acquisition. The Flash/ADC board contains four, 1 MSPS, input channel signals and an Open NAND Flash memory module with an analog to digital converter. The ADC, data bits, and control line signals from the board are sent to an Microsemi/Actel FPGA development kit for VHDL programming of the flash memory WRITE, READ, READ STATUS, ERASE, and RESET operation waveforms using Libero software. The debug board will be used for verification of the analog input signal and be able to communicate via serial interface with the module instrumentation. The scope of the new controller module was to find and develop an ONFI controller with the debug board layout designed and completed for manufacture. Successful flash memory operation waveform test routines were completed, simulated, and tested to work on the FPGA board. Through connection of the Flash/ADC board with the FPGA, it was found that the device specifications were not being meet with Vdd reaching half of its voltage. Further testing showed that it was the manufactured Flash/ADC board that contained a misalignment with the ONFI memory module traces. The errors proved to be too great to fix in the time limit set for the project.

  18. [The P300-based brain-computer interface: presentation of the complex "flash + movement" stimuli].

    Science.gov (United States)

    Ganin, I P; Kaplan, A Ia

    2014-01-01

    The P300 based brain-computer interface requires the detection of P300 wave of brain event-related potentials. Most of its users learn the BCI control in several minutes and after the short classifier training they can type a text on the computer screen or assemble an image of separate fragments in simple BCI-based video games. Nevertheless, insufficient attractiveness for users and conservative stimuli organization in this BCI may restrict its integration into real information processes control. At the same time initial movement of object (motion-onset stimuli) may be an independent factor that induces P300 wave. In current work we checked the hypothesis that complex "flash + movement" stimuli together with drastic and compact stimuli organization on the computer screen may be much more attractive for user while operating in P300 BCI. In 20 subjects research we showed the effectiveness of our interface. Both accuracy and P300 amplitude were higher for flashing stimuli and complex "flash + movement" stimuli compared to motion-onset stimuli. N200 amplitude was maximal for flashing stimuli, while for "flash + movement" stimuli and motion-onset stimuli it was only a half of it. Similar BCI with complex stimuli may be embedded into compact control systems requiring high level of user attention under impact of negative external effects obstructing the BCI control.

  19. Celiac disease, iron deficiency anaemia, grave's disease, osteopenia and short stature in single patient

    International Nuclear Information System (INIS)

    Radaideh, A.M.

    2015-01-01

    Celiac disease is an intestinal immune mediated disorder, triggered by ingestion of gluten-containing diet in genetically susceptible individuals. The genetic pre-disposition is related to human leukocyte antigen (HLA) class II genes, especially HLA-DQ2 positive patients. The prevalence of celiac disease in high worldwide and it has been estimated to be 1-26% in Western countries. Many auto-immune diseases can be associated with celiac disease including auto-immune thyroid disease; hashimoto thyroiditis and grave's disease. The opposite also appears to be true, celiac disease is found on persons with auto-immune thyroid disorders at high rates than the general population. Celiac disease is also associated with other extraintestinal diseases other the auto-immune diseases like anemia, short stature, metabolic bone disease and others. Screening for celiac disease should be considered in patients with auto-immune thyroid disease, anemia, short stature and metabolic bone disease. The life-long adherence to gluten-free diet is the only cure in celiac disease and can improve the quality of patients life and prevent future complications. This report describes a case of Grave's disease, Iron deficiency anemia, Short stature, Osteopenia, diagnosed to have Celiac disease. (author)

  20. Super Resolution Image Enhancement for a Flash Lidar: Back Projection Method

    Science.gov (United States)

    Bulyshev, Alexander; Hines, Glenn; Vanek, Michael; Amzajerdian, Farzin; Reisse, Robert; Pierrottet, Diego

    2010-01-01

    In this paper a new image processing technique for flash LIDAR data is presented as a potential tool to enable safe and precise spacecraft landings in future robotic or crewed lunar and planetary missions. Flash LIDARs can generate, in real-time, range data that can be interpreted as a 3-dimensional (3-D) image and transformed into a corresponding digital elevation map (DEM). The NASA Autonomous Landing and Hazard Avoidance (ALHAT) project is capitalizing on this new technology by developing, testing and analyzing flash LIDARs to detect hazardous terrain features such as craters, rocks, and slopes during the descent phase of spacecraft landings. Using a flash LIDAR for this application looks very promising, however through theoretical and simulation analysis the ALHAT team has determined that a single frame, or mosaic, of flash LIDAR data may not be sufficient to build a landing site DEM with acceptable spatial resolution, precision, size, or for a mosaic, in time, to meet current system requirements. One way to overcome this potential limitation is by enhancing the flash LIDAR output images. We propose a new super-resolution algorithm applicable to flash LIDAR range data that will create a DEM with sufficient accuracy, precision and size to meet current ALHAT requirements. The performance of our super-resolution algorithm is analyzed by processing data generated during a series of simulation runs by a high fidelity model of a flash LIDAR imaging a high resolution synthetic lunar elevation map. The flash LIDAR model is attached to a simulated spacecraft by a gimbal that points the LIDAR to a target landing site. For each simulation run, a sequence of flash LIDAR frames is recorded and processed as the spacecraft descends toward the landing site. Each run has a different trajectory profile with varying LIDAR look angles of the terrain. We process the output LIDAR frames using our SR algorithm and the results show that the achieved level of accuracy and precision of

  1. In vivo biocompatibility of ultra-short single-walled carbon nanotube/biodegradable polymer nanocomposites for bone tissue engineering.

    NARCIS (Netherlands)

    Sitharaman, B.; Shi, X.; Walboomers, X.F.; Liao, H.; Cuijpers, V.; Wilson, L.J.; Mikos, A.G.; Jansen, J.A.

    2008-01-01

    Scaffolds play a pivotal role in the tissue engineering paradigm by providing temporary structural support, guiding cells to grow, assisting the transport of essential nutrients and waste products, and facilitating the formation of functional tissues and organs. Single-walled carbon nanotubes

  2. Normal temporal binding window but no sound-induced flash illusion in people with one eye.

    Science.gov (United States)

    Moro, Stefania S; Steeves, Jennifer K E

    2018-04-19

    Integrating vision and hearing is an important way in which we process our rich sensory environment. Partial deprivation of the visual system from the loss of one eye early in life results in adaptive changes in the remaining senses (e.g., Hoover et al. in Exp Brain Res 216:565-74, 2012). The current study investigates whether losing one eye early in life impacts the temporal window in which audiovisual events are integrated and whether there is vulnerability to the sound-induced flash illusion. In Experiment 1, we measured the temporal binding window with a simultaneity judgement task where low-level auditory and visual stimuli were presented at different stimulus onset asynchronies. People with one eye did not differ in the width of their temporal binding window, but they took longer to make judgements compared to binocular viewing controls. In Experiment 2, we measured how many light flashes were perceived when a single flash was paired with multiple auditory beeps in close succession (sound induced flash illusion). Unlike controls, who perceived multiple light flashes with two, three or four beeps, people with one eye were not susceptible to the sound-induced flash illusion. In addition, they took no longer to respond compared to both binocular and monocular (eye-patched) viewing controls. Taken together, these results suggest that the lack of susceptibility to the sound-induced flash illusion in people with one eye cannot be accounted for by the width of the temporal binding window. These results provide evidence for adaptations in audiovisual integration due to the reduction of visual input from the loss of one eye early in life.

  3. Does crown/implant ratio influence the survival and marginal bone level of short single implants in the mandibular molar? A preliminary investigation consisting of 12 patients.

    Science.gov (United States)

    Ghariani, L; Segaan, L; Rayyan, M M; Galli, S; Jimbo, R; Ibrahim, A

    2016-02-01

    Crown/implant (C/I) ratio has been proven to not affect the survival of the implants; however, it is also a fact that no evidence exists with regard to the use of single short implants in the mandibular molar. The aim of this study was to determine whether the crown/implant ratios of single implant-supported fixed restorations on implants of 6-8 mm in the mandibular molar have an impact on the implant survival and marginal bone maintenance. Twelve short dental implants (6-8 mm) were installed and restored with single crowns, loaded after 3 months of healing. The restorations were divided according to crown-to-implant ratio into two groups: Group 1: C/I implant placement and after 12 months follow-up from loading. Reduced implant/crown ratio shown no statistic significant differences on implant survival and the alveolar bone level compared with recommended implant/crown ratio. Within the limitation of this study, it can be concluded that reduced C/I ratio could be used as a substitute for recommended C/I ratio in severely mandibular atrophic residual alveolar ridges. © 2015 John Wiley & Sons Ltd.

  4. Flow ensemble prediction for flash flood warnings at ungauged basins

    Science.gov (United States)

    Demargne, Julie; Javelle, Pierre; Organde, Didier; Caseri, Angelica; Ramos, Maria-Helena; de Saint Aubin, Céline; Jurdy, Nicolas

    2015-04-01

    for significant events of the 2010-2013 period. The evaluation showed significant improvements in terms of flash flood event detection and effective warning lead-time, compared to warnings from the current AIGA setup (without any future precipitation). Various verification metrics (e.g., Relative Mean Error, Continuous Rank Probability Skill Score) show the skill of ensemble precipitation and flow forecasts compared to single-valued persistency benchmarks. In addition to propagating the QPF uncertainty to streamflow forecasts, we discuss how to account for other sources of forecast uncertainty, including precipitation observational uncertainty (Caseri et al. 2014) and hydrologic uncertainties. Planned enhancements include ingesting other probabilistic nowcast and NWP products from Météo-France's convection-permitting AROME model, as well as developing comprehensive observational and post-event damage database to determine decision-relevant thresholds for flood magnitude and probability. Caseri, A., Javelle, P., Ramos, M.H., Leblois, E., 2014. Generating precipitation ensembles for flood alert and risk management. Journal of Flood Risk Management (submitted). Javelle, P., Demargne, J., Defrance, D., Arnaud, P., 2014. Evaluating flash flood warnings at ungauged locations using post-event surveys: a case study with the AIGA warning system. Hydrological Sciences Journal. doi: 10.1080/02626667.2014.923970

  5. Flexible selection of a single treatment incorporating short-term endpoint information in a phase II/III clinical trial.

    Science.gov (United States)

    Stallard, Nigel; Kunz, Cornelia Ursula; Todd, Susan; Parsons, Nicholas; Friede, Tim

    2015-10-15

    Seamless phase II/III clinical trials in which an experimental treatment is selected at an interim analysis have been the focus of much recent research interest. Many of the methods proposed are based on the group sequential approach. This paper considers designs of this type in which the treatment selection can be based on short-term endpoint information for more patients than have primary endpoint data available. We show that in such a case, the familywise type I error rate may be inflated if previously proposed group sequential methods are used and the treatment selection rule is not specified in advance. A method is proposed to avoid this inflation by considering the treatment selection that maximises the conditional error given the data available at the interim analysis. A simulation study is reported that illustrates the type I error rate inflation and compares the power of the new approach with two other methods: a combination testing approach and a group sequential method that does not use the short-term endpoint data, both of which also strongly control the type I error rate. The new method is also illustrated through application to a study in Alzheimer's disease. © 2015 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

  6. A void distribution model-flashing flow

    International Nuclear Information System (INIS)

    Riznic, J.; Ishii, M.; Afgan, N.

    1987-01-01

    A new model for flashing flow based on wall nucleations is proposed here and the model predictions are compared with some experimental data. In order to calculate the bubble number density, the bubble number transport equation with a distributed source from the wall nucleation sites was used. Thus it was possible to avoid the usual assumption of a constant bubble number density. Comparisons of the model with the data shows that the model based on the nucleation site density correlation appears to be acceptable to describe the vapor generation in the flashing flow. For the limited data examined, the comparisons show rather satisfactory agreement without using a floating parameter to adjust the model. This result indicated that, at least for the experimental conditions considered here, the mechanistic predictions of the flashing phenomenon is possible on the present wall nucleation based model

  7. Mental models of flash floods and landslides.

    Science.gov (United States)

    Wagner, Klaus

    2007-06-01

    Perceptions of flash floods and landslides were analyzed in four communities of the Bavarian Alps using the mental model approach. Thirty-eight qualitative interviews, two telephone surveys with 600 respondents, and two onsite interviews (74/95 respondents) were conducted. Mental models concerning flash floods are much better developed than those for landslides because the key physical processes for flash floods are easier for the general public to recognize and understand. Mental models are influenced by the local conditions. People who have a better knowledge about the hazards are those who use many different sources to inform themselves, express fear about natural hazards, or have previous experience with hazards. Conclusions for how to improve information for the general public are discussed.

  8. An Analysis of Total Lightning Flash Rates Over Florida

    Science.gov (United States)

    Mazzetti, Thomas O.; Fuelberg, Henry E.

    2017-12-01

    Although Florida is known as the "Sunshine State", it also contains the greatest lightning flash densities in the United States. Flash density has received considerable attention in the literature, but lightning flash rate has received much less attention. We use data from the Earth Networks Total Lightning Network (ENTLN) to produce a 5 year (2010-2014) set of statistics regarding total flash rates over Florida and adjacent regions. Instead of tracking individual storms, we superimpose a 0.2° × 0.2° grid over the study region and count both cloud-to-ground (CG) and in-cloud (IC) flashes over 5 min intervals. Results show that the distribution of total flash rates is highly skewed toward small values, whereas the greatest rate is 185 flashes min-1. Greatest average annual flash rates ( 3 flashes min-1) are located near Orlando. The southernmost peninsula, North Florida, and the Florida Panhandle exhibit smaller average annual flash rates ( 1.5 flashes min-1). Large flash rates > 100 flashes min-1 can occur during any season, at any time during the 24 h period, and at any location within the domain. However, they are most likely during the afternoon and early evening in East Central Florida during the spring and summer months.

  9. Generation and characterization of ultra-short electron beams for single spike infrared FEL radiation at SPARC_LAB

    Science.gov (United States)

    Villa, F.; Anania, M. P.; Artioli, M.; Bacci, A.; Bellaveglia, M.; Bisesto, F. G.; Biagioni, A.; Carpanese, M.; Cardelli, F.; Castorina, G.; Chiadroni, E.; Cianchi, A.; Ciocci, F.; Croia, M.; Curcio, A.; Dattoli, G.; Gallo, A.; Di Giovenale, D.; Di Palma, E.; Di Pirro, G.; Ferrario, M.; Filippi, F.; Giannessi, L.; Giribono, A.; Marocchino, A.; Massimo, F.; Mostacci, A.; Petralia, A.; Petrarca, M.; Petrillo, V.; Piersanti, L.; Pioli, S.; Pompili, R.; Romeo, S.; Rossi, A. R.; Scifo, J.; Shpakov, V.; Vaccarezza, C.

    2017-09-01

    The technique for producing and measuring few tens of femtosecond electron beams, and the consequent generation of few tens femtoseconds single spike FEL radiation pulses at SPARC_LAB is presented. The undulator has been used in the double role of radiation source and diagnostic tool for the characterization of the electron beam. The connection between the electron bunch length and the radiation bandwidth is analyzed.

  10. Flash Flood Detection in Urban Cities Using Ultrasonic and Infrared Sensors

    KAUST Repository

    Mousa, Mustafa

    2016-07-19

    Floods are the most common type of natural disaster. Often leading to loss of lives and properties in the thousands yearly. Among these events, urban flash floods are particularly deadly because of the short timescales on which they occur, and because of the population density of cities. Since most flood casualties are caused by a lack of information on the impending flood (type, location, severity), sensing these events is critical to generate accurate and detailed warnings and short term forecasts. However, no dedicated flash flood sensing systems, that could monitor the propagation of flash floods, in real time, currently exist in cities. In the present paper, firstly a new sensing device that can simultaneously monitor urban flash floods and traffic congestion has been presented. This sensing device is based on the combination of ultrasonic range-finding with remote temperature sensing, and can sense both phenomena with a high degree of accuracy, using a combination of L1-regularized reconstruction and artificial neural networks to process measurement data. Secondly, corresponding algorithms have been implemented on a low-power wireless sensor platform, and their performance in water level estimation in a 6 months test involving four different sensors is illustrated. The results demonstrate that urban water levels can be reliably estimated with error less than 2 cm, and that the preprocessing and machine learning schemes can run in real-time on currently available wireless sensor platforms.

  11. Real-Time, Single-Shot Temporal Measurements of Short Electron Bunches, Terahertz CSR and FEL Radiation

    CERN Document Server

    Berden, G; Van der Meer, A F G

    2005-01-01

    Electro-optic detection of the Coulomb field of electron bunches is a promising technique for single-shot measurements of the bunch length and shape in the sub-picosecond time domain. This technique has been applied to the measurement of 50 MeV electron bunches in the FELIX free electron laser, showing the longitudinal profile of single bunches of around 650 fs FWHM [Phys. Rev. Lett. 93, 114802 (2004)]. The method is non-destructive and real-time, and therefore ideal for online monitoring of the longitudinal shape of single electron bunches. At FELIX we have used it for real-time optimization of sub-picosecond electron bunches. Electro-optic detection has also been used to measure the electric field profiles of far-infrared (or terahertz) optical pulses generated by the relativistic electrons. We have characterised the far-infrared output of the free electron laser, and more recently, we have measured the temporal profile of terahertz optical pulses generated at one of the bending magnets.

  12. Comparison of the effect of multiple short-duration with single long-duration exercise sessions on glucose homeostasis in type 2 diabetes mellitus

    DEFF Research Database (Denmark)

    Eriksen, L; Dahl-Petersen, I; Haugaard, Steen B

    2007-01-01

    AIMS/HYPOTHESIS: We evaluated and compared the effects on glycaemic control of two different exercise protocols in elderly men with type 2 diabetes mellitus. METHODS: Eighteen patients with type 2 diabetes mellitus carried out home-based bicycle training for 5 weeks. Patients were randomly assigned...... glucose OGTT (p = 0.04) and plasma glucose concentration areas under the curve at 120 min (p exercise groups...... increased similarly in both exercise groups. A possible explanation is that the energy expenditure associated with multiple short daily sessions may be greater than that in a single daily session. Udgivelsesdato: 2007-Nov...

  13. Flash Builder 4 and Flex 4 Bible

    CERN Document Server

    Gassner, David

    2010-01-01

    A complete and thorough reference for developers on the new Flex 4 platform. Create desktop applications that behave identically on Windows, Mac OS X, and Linux with Adobe's new Flash Builder 4 platform and this in-depth guide. The book's tutorials and explanations walk you step-by-step through Flash Builder's new, faster tools; the new framework for generating code; how to connect to popular application servers; upgrading from Flex 3; and much more.: Shows you how to create rich applications for the Web and desktop with the very latest version of Flex, with detailed coverage for both new and

  14. Heat Transfer in a Flash Fuser.

    Science.gov (United States)

    Baumann, Gerald Walter

    Flash fusing is used in high speed electrophotographic computer printers to melt the thermoplastic printed image on the paper surface. This technology is not yet well understood, even though it has been used in several different machines. Consequently current fusers may be far from optimum. The aim of this research is to formulate and confirm mathematical models of the fuser. The fusing process was modelled by transient thermal conduction. The toner was assumed to fuse to the paper when its lower surface, against the paper, reached its melting point. The temperature depends on the power input to the toner from the flash tube. Hence, mathematical models were developed to describe both the electrical conduction and radiation characteristics of the flash tube. These models were coupled to the equations describing the electrical drive circuits, and the instantaneous output of the flash was computed. These results were then used in the transient heat conduction model of the toner and paper. A ballistic integrating radiometer was built to measure the total output energy of the flash tube. The electrical input power to the flash tube was measured and compared to the model. These experiments were used to support the computed power input to the toner surface. Unfused prints were exposed to a multitude of pulse shapes, pulse widths, and energies. A standard adhesion test was used to measure the degree of fusing. The temperature of the toner/paper interface was computed. The toner had significant porosity and its heat capacity varied greatly with temperature. The adsorbed water in the paper influenced the temperature profile. The experiments confirmed the melting model. The degree of fusing correlated well with computed interface temperature, and not with input energy or surface temperature. Toner porosity and flash pulse shape are potential design parameters, and they were studied in detail. Modelling results indicate that modest reductions in porosity can significantly

  15. Foundation Flash CS5 for Designers

    CERN Document Server

    Green, T

    2010-01-01

    Flash is one of the most engaging, innovative, and versatile technologies available - allowing the creation of anything from animated banners and simple cartoons to Rich Internet Applications, interactive videos, and dynamic user interfaces for web sites, kiosks, devices, or DVDs. The possibilities are endless, and now it just got better. Flash CS5 boasts a host of new features, including better support for mobile devices, a whole new animation engine enabling full manipulation of tweens and paths, custom easing, improved inverse kinematics, a revamped timeline, built-in 3D, and much more. Thi

  16. 3D Flash LIDAR Space Laser, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business that has developed 3D Flash LIDAR systems for space and terrestrial applications. 3D Flash LIDAR is...

  17. 3D Flash LIDAR EDL Resolution Improvement, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business that has developed 3D Flash LIDAR systems for space and terrestrial applications. 3D Flash LIDAR is...

  18. The relativistic feedback discharge model of terrestrial gamma ray flashes

    Science.gov (United States)

    Dwyer, Joseph R.

    2012-02-01

    As thunderclouds charge, the large-scale fields may approach the relativistic feedback threshold, above which the production of relativistic runaway electron avalanches becomes self-sustaining through the generation of backward propagating runaway positrons and backscattered X-rays. Positive intracloud (IC) lightning may force the large-scale electric fields inside thunderclouds above the relativistic feedback threshold, causing the number of runaway electrons, and the resulting X-ray and gamma ray emission, to grow exponentially, producing very large fluxes of energetic radiation. As the flux of runaway electrons increases, ionization eventually causes the electric field to discharge, bringing the field below the relativistic feedback threshold again and reducing the flux of runaway electrons. These processes are investigated with a new model that includes the production, propagation, diffusion, and avalanche multiplication of runaway electrons; the production and propagation of X-rays and gamma rays; and the production, propagation, and annihilation of runaway positrons. In this model, referred to as the relativistic feedback discharge model, the large-scale electric fields are calculated self-consistently from the charge motion of the drifting low-energy electrons and ions, produced from the ionization of air by the runaway electrons, including two- and three-body attachment and recombination. Simulation results show that when relativistic feedback is considered, bright gamma ray flashes are a natural consequence of upward +IC lightning propagating in large-scale thundercloud fields. Furthermore, these flashes have the same time structures, including both single and multiple pulses, intensities, angular distributions, current moments, and energy spectra as terrestrial gamma ray flashes, and produce large current moments that should be observable in radio waves.

  19. All-digital full waveform recording photon counting flash lidar

    Science.gov (United States)

    Grund, Christian J.; Harwit, Alex

    2010-08-01

    Current generation analog and photon counting flash lidar approaches suffer from limitation in waveform depth, dynamic range, sensitivity, false alarm rates, optical acceptance angle (f/#), optical and electronic cross talk, and pixel density. To address these issues Ball Aerospace is developing a new approach to flash lidar that employs direct coupling of a photocathode and microchannel plate front end to a high-speed, pipelined, all-digital Read Out Integrated Circuit (ROIC) to achieve photon-counting temporal waveform capture in each pixel on each laser return pulse. A unique characteristic is the absence of performance-limiting analog or mixed signal components. When implemented in 65nm CMOS technology, the Ball Intensified Imaging Photon Counting (I2PC) flash lidar FPA technology can record up to 300 photon arrivals in each pixel with 100 ps resolution on each photon return, with up to 6000 range bins in each pixel. The architecture supports near 100% fill factor and fast optical system designs (f/#60 dB ultimate dynamic range improvement, and >104 reductions in false alarm rates are anticipated, while achieving single photon range precision better than 1cm. I2PC significantly extends long-range and low-power hard target imaging capabilities useful for autonomous hazard avoidance (ALHAT), navigation, imaging vibrometry, and inspection applications, and enables scannerless 3D imaging for distributed target applications such as range-resolved atmospheric remote sensing, vegetation canopies, and camouflage penetration from terrestrial, airborne, GEO, and LEO platforms. We discuss the I2PC architecture, development status, anticipated performance advantages, and limitations.

  20. Margin Reflex Distance: Differences Based on Camera and Flash Positions.

    Science.gov (United States)

    Choi, Catherine J; Chou, Jonathan C; Lefebvre, Daniel R; Yoon, Michael K

    2016-01-01

    To evaluate the effect of camera flash position on the measurement of photographic margin reflex distances (MRD). Subjects without any ophthalmic disease were prospectively enrolled after institutional review board approval. Clinical measurements of MRD1 and interpalpebral fissure were obtained. Photographs were then taken with a digital single lens reflex with built-in pop-up flash (dSLR-pop), a dSLR with lens-mounted ring flash (dSLR-ring), a point-and-shoot camera, and a smartphone, each in 4 positions: with the camera upright, rotated 90°, 180°, and 270°. The images were analyzed using ImageJ software to measure MRD1, interpalpebral fissure, horizontal white-to-white, and distance from nasal limbus to the corneal light reflex. Thirty-two eyes of 16 subjects were included (ages 27-65). When using the dSLR-ring, point-and-shoot, and smartphone, the difference between clinical and photographic MRD1 did not reach statistical significance. There was, however, a statistically significant difference in the upright position with dSLR-pop (mean difference 0.703 mm, σ = 0.984 mm, p = 0.0008). For dSLR-pop, photographic MRD1 in upright versus inverted position differed significantly (mean difference -0.562 mm, σ =0.348 mm, p MRD1 between dSLR-pop and dSLR-ring showed significant difference in upright position (mean difference -0.572 mm, σ = 0.701 mm, p = 0.0002). There were no statistically significant differences between clinical and photographic interpalpebral fissure, and among white-to-white and nasal limbus to light reflex measurements in any position in all 4 cameras. When using photographs for measurement of MRD1, cameras with a near-coaxial light source and aperture have values that are most similar to clinical measurements.

  1. Venlafaxine hydrochloride for the treatment of hot flashes.

    Science.gov (United States)

    Schober, Christina E; Ansani, Nicole T

    2003-11-01

    To review the literature evaluating venlafaxine for the treatment of hot flashes. Clinical literature accessed through MEDLINE (1966-August 2002), PubMed, Harrison's Online, and references of reviewed articles. Key terms used were venlafaxine, Effexor, hot flashes, and vasomotor symptoms. Not all patients experiencing hot flashes are candidates for traditional hormonal therapy. Nonhormonal alternatives have long been explored, but conflicting evidence of efficacy exists. Venlafaxine is an effective nonhormonal alternative for relief from uncontrolled hot flashes.

  2. Comparing Short-term Complications of Inpatient Versus Outpatient Single-level Anterior Cervical Discectomy and Fusion: An Analysis of 6940 Patients Using the ACS-NSQIP Database.

    Science.gov (United States)

    Khanna, Ryan; Kim, Robert B; Lam, Sandi K; Cybulski, George R; Smith, Zachary A; Dahdaleh, Nader S

    2018-02-01

    Multicenter propensity score-adjusted retrospective cohort study. To determine baseline 30-day complication rates for anterior cervical discectomy and fusion (ACDF) and compare clinical complications for patients undergoing single-level ACDFs between inpatient and outpatient settings. ACDF remains the most common procedure in the treatment of a variety of cervical disc pathologies, making it a focus of quality improvement initiatives. Outpatient single-level ACDFs are becoming more common and offer advantages including reducing nosocomial infections and costs, as well as improved patient satisfaction. The 2011-2013 NSQIP datasets were queried to identify all patients who underwent single-level ACDF procedures using current procedural terminology codes. Outpatient and inpatient cohorts were matched 1:1 using propensity score analysis to assess short-term outcomes. The outcomes assessed included 30-day medical and surgical complications, reoperation, readmission, and mortality. In total, 6940 patients underwent a single-level ACDF with an overall complication rate of 4.2%. A total of 5162 patients (74.4%) had an inpatient hospital stay after surgery, whereas 1778 patients (25.6%) had outpatient surgery. After matching based on preoperative and operative characteristics to account for potential confounders, the overall complication rate was higher in the inpatient arm compared with the outpatient arm (2.5% vs. 1.2%; P=0.003). The 30-day readmission rate was also higher but not significant in the inpatient group than the outpatient group (2.2% vs. 1.8%; P=0.355). Mortality was the same with 0.1% in both groups (P=0.564). Patients undergoing outpatient single-level ACDF had a lower 30-day complication rates than those undergoing it in the inpatient setting. Outpatient surgery for single-level ACDF is safe and a favorable option for suitable patients. Level 3.

  3. Decision support system for road closures in flash flood emergencies.

    Science.gov (United States)

    2013-06-01

    Among all the natural hazards, flash flood ranks as the No. 1 weather-related killer in U.S. More : than half of the deaths in flash flood are due to drowning victims in a traffic environment. So road : closure is critical to save lives from flash fl...

  4. Short term endurance results on a single cylinder diesel engine fueled with upgraded bio oil biodiesel emulsion

    Science.gov (United States)

    Prakash, R.; Murugan, S.

    2017-11-01

    This paper deliberates the endurance test outcomes obtained from a single cylinder, diesel engine fueled with an upgraded bio oil biodiesel emulsion. In this investigation a bio oil obtained by pyrolysis of woody biomass was upgraded with acid treatment. The resulted bio oil was emulsified with addition of biodiesel and suitable surfactant which is termed as ATJOE15. The main objective of the endurance test was to evaluate the wear characteristics of the engine components and lubrication oil properties, when the engine is fueled with the ATJOE15 emulsion. The photographic views taken before and after the end of 100 hrs endurance test, and visual inspection of the engine components, wear and carbon deposit results, are discussed in this paper.

  5. WDM-Coherent OCDMA over one single device based on short chip Super Structured Fiber Bragg Gratings.

    Science.gov (United States)

    Amaya, Waldimar; Pastor, Daniel; Baños, Rocio; Garcia-Munoz, Victor

    2011-11-21

    We theoretically propose and demonstrate experimentally a Coherent Direct Sequence OCDMA en/decoder for multi-channel WDM operation based on a single device. It presents a broadband spectral envelope and a periodic spectral pattern that can be employed for en/decoding multiple sub-bands simultaneously. Multi-channel operation is verified experimentally by means of Multi-Band Super Structured Fiber Bragg Gratings with binary phase encoded chips fabricated with 1mm inter-chip separation that provides 4x100 GHz ITU sub-band separation at 1.25 Gbps. The WDM-OCDMA system verification was carried out employing simultaneous encoding of four adjacent sub-bands and two different OCDMA codes. © 2011 Optical Society of America

  6. Flash-Aware Page Replacement Algorithm

    Directory of Open Access Journals (Sweden)

    Guangxia Xu

    2014-01-01

    Full Text Available Due to the limited main memory resource of consumer electronics equipped with NAND flash memory as storage device, an efficient page replacement algorithm called FAPRA is proposed for NAND flash memory in the light of its inherent characteristics. FAPRA introduces an efficient victim page selection scheme taking into account the benefit-to-cost ratio for evicting each victim page candidate and the combined recency and frequency value, as well as the erase count of the block to which each page belongs. Since the dirty victim page often contains clean data that exist in both the main memory and the NAND flash memory based storage device, FAPRA only writes the dirty data within the victim page back to the NAND flash memory based storage device in order to reduce the redundant write operations. We conduct a series of trace-driven simulations and experimental results show that our proposed FAPRA algorithm outperforms the state-of-the-art algorithms in terms of page hit ratio, the number of write operations, runtime, and the degree of wear leveling.

  7. Mathematical modeling of the flash converting process

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, H.Y.; Perez-Tello, M.; Riihilahti, K.M. [Utah Univ., Salt Lake City, UT (United States)

    1996-12-31

    An axisymmetric mathematical model for the Kennecott-Outokumpu flash converting process for converting solid copper matte to copper is presented. The model is an adaptation of the comprehensive mathematical model formerly developed at the University of Utah for the flash smelting of copper concentrates. The model incorporates the transport of momentum, heat, mass, and reaction kinetics between gas and particles in a particle-laden turbulent gas jet. The standard k-{epsilon} model is used to describe gas-phase turbulence in an Eulerian framework. The particle-phase is treated from a Lagrangian viewpoint which is coupled to the gas-phase via the source terms in the Eulerian gas-phase governing equations. Matte particles were represented as Cu{sub 2}S yFeS, and assumed to undergo homogeneous oxidation to Cu{sub 2}O, Fe{sub 3}O{sub 4}, and SO{sub 2}. A reaction kinetics mechanism involving both external mass transfer of oxygen gas to the particle surface and diffusion of oxygen through the porous oxide layer is proposed to estimate the particle oxidation rate Predictions of the mathematical model were compared with the experimental data collected in a bench-scale flash converting facility. Good agreement between the model predictions and the measurements was obtained. The model was used to study the effect of different gas-injection configurations on the overall fluid dynamics in a commercial size flash converting shaft. (author)

  8. Short-term clinical performance of zirconia single crowns with different framework designs: 3-year clinical trial.

    Science.gov (United States)

    Ferrari, Marco; Sorrentino, Roberto; Cagidiaco, Crysanti; Goracci, Cecilia; Vichi, Alessandro; Gherlone, Enrico; Zarone, Fernando

    2015-08-01

    The present prospective clinical study evaluated the influence of coping design on the fracture resistance of CAD/CAM zirconia single crowns layered with dedicated ceramics. 56 subjects were provided with 90 zirconia single crowns in posterior regions. Tooth preparations were standardized and the abutment teeth were randomly distributed into three groups, according to three different coping designs (flat design, FD; porcelain-fused-to-metal-like crowns, PFM; anatomically-guided, AG). The zirconia cores were produced using a CAD/CAM software and then were hand-layered with dedicated ceramics. All crowns were cemented with a self-adhesive resin luting agent and the patients were recalled for follow-up visits after 1 month, 6 months, 1, 2 and 3 years of clinical service. The function, esthetics and marginal adaptation of the restorations were evaluated. Statistical analyses were performed to evaluate survival and success of the restorations. Success rates of 100% were reported in Group 2 and Group 3 while the percentage was 80% in Group 1. Three chippings were noticed in Group 1 (FD) and two crowns needed to be replaced after 3 years, resulting in a survival rate of 93.3%. Group 2 and Group 3 had significantly higher 3-year success rates than Group 1 (P crowns performed better clinically than the flat designed cores in posterior regions after 3 years; standardized tooth preparations achieved even thicknesses of the bilayered restorations; the proper support given to the veneering ceramic by the correct design of the zirconia framework could significantly reduce the risk of chipping during function.

  9. Short term changes in melatonin and cortisol serum levels after a single administration of estrogen to menopausal women.

    Science.gov (United States)

    Kerdelhué, Bernard; Andrews, Mason C; Zhao, Yueqin; Scholler, Robert; Jones, Howard W

    2006-10-01

    It has been well-documented that serum melatonin levels are insensitive to estrous or menstrual ovarian steroid variations in the female rat or the human. However, a negative coupling has been already demonstrated between the nocturnal serum melatonin peak and serum E2 concentration during the late premenopausal period in the woman. The objection of the present study was designed to determine if diurnal serum melatonin values can be also lowered by a single administration of estrogen. We performed a detailed analysis of variations of serum estradiol, LH, FSH, melatonin and cortisol after one single I.M. injection of 2 mg of a conjugated estrogen, delestrogen (estradiol valerate) in 0.1 ml of oil. A 15 ml blood collection was done at 8:00 a.m. before the injection, and at 8:30 a.m., 9:00 a.m., 10:00 a.m., 12:00 noon, and 4:00 p.m. 17beta-estradiol, LH and FSH were determined by microparticle enzyme immunoassays kits. Melatonin determination was made using a RIA kit and cortisol was assayed by a RIA method. A significant rise in serum 17beta-estradiol was already seen by one hour after the injection of estradiol valerate. Then, an almost linear increase was observed up to at last eight hours after the injection of estradiol valerate. A significant decrease in serum LH was not seen before four hours after the injection of estradiol valerate. Overall, there was a trend toward a decline in serum melatonin and cortisol concentration. The decreasing trend of cortisol serum level was tested as significant over time (pmelatonin. Overall, these results show that after menopause an acute administration of estrogen during the early diurnal period of the day leads to a significant rapid decrease in cortisol serum values, but to only a partial non significant decrease in melatonin serum values.

  10. On the origin of X-ray Flashes

    CERN Document Server

    Dar, Arnon; Dar, Arnon; Rujula, Alvaro De

    2003-01-01

    We use the very simple and successful cannonball (CB) model of gamma ray bursts (GRBs) and their afterglows (AGs) to analyze the observational data on X-ray flashes (XRFs) and their AGs. We show that the observations support the CB-model interpretation that XRFs, like GRBs, are produced by the explosions of core-collapse supernovae (SNe) akin to SN1998bw, by jets of highly-relativistic CBs. The XRFs and GRBs are intrinsically identical objects, but the XRFs are viewed from angles (relative to the jet direction) which are typically a few times larger than the typical viewing angles of ``classical'', long-duration GRBs. XRFs of shorter duration than the ones observed so far, like short GRBs, may be produced in Type Ia SNe akin to SN1997cy.

  11. Juvenile systemic lupus erythematosus: onset patterns and short-term outcome in Egyptian children, a single-center experience.

    Science.gov (United States)

    Abdel-Hafez, M A; Abdel-Nabi, H

    2015-11-01

    The objective of this article is to define disease onset pattern and understand the response to therapy in children with systemic lupus erythematosus (SLE) in Egypt. A prospective cohort of 41 Egyptian children diagnosed with SLE was analyzed. SLE Disease Activity Index (SLEDAI) score was used to record disease activity at onset, and renal biopsy was performed to define the stage of lupus nephritis. Response to therapy over a follow-up period ranging from 10 to 50 months was evaluated. The mean age at diagnosis was 12.12 ± 3.45 years. Thirty-six (87.8%) patients were females. Most patients had multiple manifestations at onset. The most common presenting symptoms were pallor and fever (51.2% and 43.9%, respectively). Lupus nephritis was found in 27 (65.9%) children. International Society of Nephrology (ISN) classes I and III were the most common findings on renal biopsy. Neuropsychiatric manifestations were present at disease onset in 19 patients (46.3%) with a bad prognostic course. At diagnosis, high SLEDAI scores were recorded (mean: 29.95 ± 2.06). The mean renal SLEDAI score was 10.2 ± 4. At follow-up 16 (39.02%) patients were in complete remission, 10 (24.39%) were in partial remission, two (4.87%) had active disease, five (12.9%) had relapsed, four (9.75%) had died and four (9.75%) patients were lost to follow-up. Egyptian children with SLE appear to have severe disease on presentation with high SLEDAI scores and high prevalence of lupus nephritis, but respond well to therapy with a favorable short-term prognosis. © The Author(s) 2015.

  12. Helium shells and faint emission lines from slitless flash spectra.

    Science.gov (United States)

    Bazin, Cyril; Koutchmy, Serge

    2013-05-01

    At the time of the two last solar total eclipses of August 1st, 2008 in Siberia and July 11th, 2010 in French Polynesia, high frame rate CCD flash spectra were obtained. These eclipses occurred in quiet Sun period and after. The slitless flash spectra show two helium shells, in the weak Paschen α 4686 Å line of the ionized helium HeII and in the neutral helium HeI line at 4713 Å. The extensions of these helium shells are typically 3 Mm. In prominences, the extension of the interface with the corona is much more extended. The observations and analysis of these lines can properly be done only in eclipse conditions, when the intensity threshold reaches the coronal level, and the parasitic scattered light is virtually zero. Under the layers of 1 Mm above the limb, many faint low FIP lines were also seen in emission. These emission lines are superposed on the continuum containing absorption lines. The solar limb can be defined using the weak continuum appearing between the emission lines at the time of the second and third contact. The variations of the singly ionized iron line, the HeI and HeII lines and the continuum intensity are analyzed. The intensity ratio of ionized to neutral helium is studied for evaluating the ionization rate in low layers up to 2 Mm and also around a prominence.

  13. Flash characteristics of plasma induced by hypervelocity impact

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Kai [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China); Beijing Automotive Technology Center, Beijing 100021 (China); Long, Renrong, E-mail: longrenrong@bit.edu.cn, E-mail: qmzhang@bit.edu.cn; Zhang, Qingming, E-mail: longrenrong@bit.edu.cn, E-mail: qmzhang@bit.edu.cn; Xue, Yijiang; Ju, Yuanyuan [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China)

    2016-08-15

    Using a two-stage light gas gun, a series of hypervelocity impact experiments was conducted in which 6.4-mm-diameter spherical 2024-aluminum projectiles impact 23-mm-thick targets made of the same material at velocities of 5.0, 5.6, and 6.3 km/s. Both an optical pyrometer composed of six photomultiplier tubes and a spectrograph were used to measure the flash of the plasma during hypervelocity impact. Experimental results show that, at a projectile velocity of 6.3 km/s, the strong flash lasted about 10 μs and reached a temperature of 4300 K. Based on the known emission lines of AL I, spectral methods can provide the plasma electron temperature. An electron-temperature comparison between experiment and theoretical calculation indicates that single ionization and secondary ionization are the two main ionizing modes at velocities 5.0–6.3 km/s.

  14. Initial electric field changes of lightning flashes in two thunderstorms

    Science.gov (United States)

    Chapman, Ryan; Marshall, Thomas; Karunarathne, Sumedhe; Stolzenburg, Maribeth

    2017-04-01

    The beginning of all 75 lightning flashes in two small thunderstorms was investigated using an array of electric field change (E-change) meters and an array of VHF sensors with the goal of determining if an initial E-change (IEC) preceded the initial breakdown (IB) pulses in each flash. IECs were found at the beginning of all 62 flashes in Storm 1 and all 13 flashes in Storm 2. Hence, it is concluded that an IEC is a fundamental part of most or all lightning initiations and that an IEC is needed prior to the first IB pulse in a flash. IEC durations averaged 0.23 ms for cloud-to-ground (CG) flashes (range 0.08-0.54 ms) and averaged 2.7 ms for normal intracloud (IC) flashes (range 0.04-9.8 ms). IEC point dipole moments averaged 26 C m for CG flashes (range 4-86 C m) and averaged -140 C m for normal IC flashes (range -8 to -650 C m). IEC current moments averaged 120 kA m for CG flashes (range 41-410 kA m) and averaged -91 kA m for normal IC flashes (range -2 to -630 kA m). E-change data support the suggestion that weak narrow bipolar event type events initiate some lightning flashes, but 41 of the 75 flashes had no detectable initiating pulse > 0.04 V m-1 range normalized to 100 km. Two flashes had two IECs; the second IEC of each flash initiated a new lightning channel that propagated in a new direction and at a higher altitude than the original development after the first IEC.

  15. Enhanced treatment of petroleum refinery wastewater by short-term applied voltage in single chamber microbial fuel cell.

    Science.gov (United States)

    Mohanakrishna, Gunda; Abu-Reesh, Ibrahim M; Kondaveeti, Sanath; Al-Raoush, Riyadh I; He, Zhen

    2018-04-01

    Electrochemically active anodic biofilm that has adapted under mild applied potentials in the range 100-500 mV was evaluated for its improved bioelectrogenesis and bioelectrochemical treatment of petroleum refinery wastewater (PRW) in a single chamber air cathode microbial fuel cell (MFC). MFC operation with 500 mV as supplemental voltage has exhibited a maximum power density of 132 mW/m 2 , which was three times higher than control MFC (45 mW/m 2 ). Similarly, highest substrate removal efficiency (48%) was also obtained with the MFC of 500 mV, followed by 300 mV (37%), 100 mV (32%) and control (27%). Adaptation under applied potential conditions also exhibited enhanced degradation efficiency of diesel range organics (DROs)/straight chain-alkanes. The strategy efficiently reduced DROs with the maximum efficiency of 89% (500 mV), which is almost 50% higher than that of the control system (59%), demonstrating the effectiveness of using supplemented voltage in treating PRW. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Flash Welding Control by Use of PWM Inverter Power Supply

    Science.gov (United States)

    Nagura, Kouki; Sato, Yukihiko; Yamamura, Naoki; Ishida, Muneaki

    The flash welding is characterized by the high quality, the high production efficiency and the large sectional area welding, and is used to weld rails and hot coils in shop welding mainly. In order to realize high accuracy and high response control of flash welding, the inverter technology has been applied to flash welding in this study. In this paper, a method of process control combined with inverter flash control and mechanical control is proposed. Experiment results of the proposed process control combined with inverter flash control and mechanical control are presented.

  17. Musicians have enhanced audiovisual multisensory binding: experience-dependent effects in the double-flash illusion.

    Science.gov (United States)

    Bidelman, Gavin M

    2016-10-01

    Musical training is associated with behavioral and neurophysiological enhancements in auditory processing for both musical and nonmusical sounds (e.g., speech). Yet, whether the benefits of musicianship extend beyond enhancements to auditory-specific skills and impact multisensory (e.g., audiovisual) processing has yet to be fully validated. Here, we investigated multisensory integration of auditory and visual information in musicians and nonmusicians using a double-flash illusion, whereby the presentation of multiple auditory stimuli (beeps) concurrent with a single visual object (flash) induces an illusory perception of multiple flashes. We parametrically varied the onset asynchrony between auditory and visual events (leads and lags of ±300 ms) to quantify participants' "temporal window" of integration, i.e., stimuli in which auditory and visual cues were fused into a single percept. Results show that musically trained individuals were both faster and more accurate at processing concurrent audiovisual cues than their nonmusician peers; nonmusicians had a higher susceptibility for responding to audiovisual illusions and perceived double flashes over an extended range of onset asynchronies compared to trained musicians. Moreover, temporal window estimates indicated that musicians' windows (listening skills, improving multimodal processing and the integration of multiple sensory systems in a domain-general manner.

  18. Short (8-mm) locking-taper implants supporting single crowns in posterior region: a prospective clinical study with 1-to 10-years of follow-up.

    Science.gov (United States)

    Mangano, Francesco Guido; Shibli, Jamil Awad; Sammons, Rachel Lilian; Iaculli, Flavia; Piattelli, Adriano; Mangano, Carlo

    2014-08-01

    The aim of this study was to evaluate the long-term outcome of short (8-mm) locking-taper implants supporting single crowns in the posterior regions and to analyze the influence of different factors on implant survival and implant-crown success rates. Between June 2002 and September 2011, all patients referred to two private practices for treatment with short (8-mm) implants supporting single tooth restorations in posterior areas of both jaws were considered for inclusion in this study. At each annual follow-up session, clinical and radiographic parameters were assessed. Implant-crown success criteria included absence of pain, suppuration, mobility, and peri-implant radiolucency, distance between the implant shoulder and the first visible bone-to-implant contact (DIB) implant-crown success were assessed using the Kaplan-Meier survival estimator; Chi-square test was applied to evaluate correlations between the study variables. The statistical analysis was performed at the patient and at the implant level. Two hundred and fifteen implants (124 maxilla; 91 mandible) were placed in 194 patients (104 men; 90 women). Three implants failed (2 maxilla; 1 mandible). The 10-year cumulative survival rate was 98.4% (patient-based) and 98.5% (implant-based). Among the surviving implants, the mean DIB was 0.31 (±0.24), 0.43 (±0.29), and 0.62 (±0.31) mm at the 1-, 5-, and 10-year follow-up session; two biologic and three prosthetic complications were reported, for a 10-year cumulative implant-crown success rate of 95.8% (patient-based) and 95.9% (implant-based). The implant survival and implant-crown success rates did not differ significantly with respect to patients' gender, age, smoking habit, parafunctional habit, implant location, implant diameter, and bone type. The use of short (8-mm) locking-taper implants is a predictable treatment modality for the restoration of single tooth gaps of posterior segments of dentition. © 2013 John Wiley & Sons A/S. Published by John

  19. Anatomy of successive helium-shell flashes: Stationary shell burning

    International Nuclear Information System (INIS)

    Sackmann, I.

    1980-01-01

    For successive helium-shell flashes, the amounts of helium and hydrogen burned were computed over the peak flash phase, over the total flash cycle, and over the quiet, interflash phase. It was found that the frequently made assumption of stationary shell burning is violated by the helium-shell flash for the first few flashes; here, over a total flash cycle, the helium-burning shell always progresses considerably faster outward than the hydrogen-burning shell. However, after about 15 flashes, coincident with the leveling out of the peaks of the helium shell, agreement with stationary shell burning is attained, both for the 3 M/sub sun/ and 6 M/sub sun/ cases

  20. Evaluation of Fluoxtinfor Treatm Ent of Menopausal Hot Flashes

    Directory of Open Access Journals (Sweden)

    L Sakhavat

    2004-10-01

    Full Text Available Introduction: Hot flashes can be prominent problem in menopausal women. The treatment of hot flashes is hormonal thrapies but in some patients that are unable to use estrogen other treating hot flashes are required. Based on anecdotal information reqarding the efficacy of fluoxtin for treating hot flashes , the present trial was developed . Methods: This trial used a double Blinded randomized to study the effecacy of fluoxetin (20mg/day and comparing with placebo in treating hot flash in 4 week treatment. Results: 310 women began protocol thrapy. in two group: A (flouxetine and B-( placebo By the end of protocol hot flashes frequeney decreased 77.5 % with floxetin versus 13.7 % whith placebo( p=.0001The flouxetin was well tolerated . Conclusion: Flouxetin resulted well improvent in hot flashes.

  1. [Simplified production of multimedia based radiological learning objects using the flash format].

    Science.gov (United States)

    Jedrusik, P; Preisack, M; Dammann, F

    2005-07-01

    Evaluation of the applicability of the Flash Format for the production of radiological learning objects used in an e-learning environment. Five exemplary learning objects with different didactic purposes referring to radiological diagnostics are presented. They have been intended for the use within the multimedia, internet-based e-learning environment LaMedica. Interactive learning objects were composed using the Flash 5.0 software (Macromedia, San Francisco, USA) on the basis of digital CT and MR images, digitized conventional radiographs and different graphical elements prepared as TIFF files or in a vector graphics format. After a short phase of initial skill adaptation training, a radiologist author was soon able to create independently all learning objects. The import of different types of images and graphical elements was carried out without complications. Despite manifold design options, handling of the program is easy due to clear arrangement and structure, thus enabling the creation of simple as well as complex learning objects that provided a high degree of attractiveness and interaction. Data volume and bandwidth demand for online use was significantly reduced by the Flash Format compression without a substantial loss of visual quality. The universally compatible Flash Format offers an opportunity for the simple production of radiological learning objects that fulfill all relevant needs of modern internet based e-learning environments, such as interactivity, employment of multimedia and convertibility.

  2. Turbo-FLASH based arterial spin labeled perfusion MRI at 7 T.

    Directory of Open Access Journals (Sweden)

    Zhentao Zuo

    Full Text Available Motivations of arterial spin labeling (ASL at ultrahigh magnetic fields include prolonged blood T1 and greater signal-to-noise ratio (SNR. However, increased B0 and B1 inhomogeneities and increased specific absorption ratio (SAR challenge practical ASL implementations. In this study, Turbo-FLASH (Fast Low Angle Shot based pulsed and pseudo-continuous ASL sequences were performed at 7T, by taking advantage of the relatively low SAR and short TE of Turbo-FLASH that minimizes susceptibility artifacts. Consistent with theoretical predictions, the experimental data showed that Turbo-FLASH based ASL yielded approximately 4 times SNR gain at 7T compared to 3T. High quality perfusion images were obtained with an in-plane spatial resolution of 0.85×1.7 mm(2. A further functional MRI study of motor cortex activation precisely located the primary motor cortex to the precentral gyrus, with the same high spatial resolution. Finally, functional connectivity between left and right motor cortices as well as supplemental motor area were demonstrated using resting state perfusion images. Turbo-FLASH based ASL is a promising approach for perfusion imaging at 7T, which could provide novel approaches to high spatiotemporal resolution fMRI and to investigate the functional connectivity of brain networks at ultrahigh field.

  3. Comparative Study of Furnace and Flash Lamp Annealed Silicon Thin Films Grown by Plasma Enhanced Chemical Vapor Deposition

    Directory of Open Access Journals (Sweden)

    Maheshwar Shrestha

    2018-03-01

    Full Text Available Low-temperature growth of microcrystalline silicon (mc-Si is attractive for many optoelectronic device applications. This paper reports a detailed comparison of optical properties, microstructure, and morphology of amorphous silicon (a-Si thin films crystallized by furnace annealing and flash lamp annealing (FLA at temperatures below the softening point of glass substrate. The initial a-Si films were grown by plasma enhanced chemical vapor deposition (PECVD. Reflectance measurement indicated characteristic peak in the UV region ~280 nm for the furnace annealed (>550 °C and flash lamp annealed films, which provided evidence of crystallization. The film surface roughness increased with increasing the annealing temperature as well as after the flash lamp annealing. X-ray diffraction (XRD measurement indicated that the as-deposited samples were purely amorphous and after furnace crystallization, the crystallites tended to align in one single direction (202 with uniform size that increased with the annealing temperature. On the other hand, the flash lamp crystalized films had randomly oriented crystallites with different sizes. Raman spectroscopy showed the crystalline volume fraction of 23.5%, 47.3%, and 61.3% for the samples annealed at 550 °C, 650 °C, and with flash lamp, respectively. The flash lamp annealed film was better crystallized with rougher surface compared to furnace annealed ones.

  4. Clinical single-shot diffusion-weighted MRI of the human brain on a short-bore medium-field imager

    International Nuclear Information System (INIS)

    Loevblad, K.O.; Remonda, L.; Schneider, J.; Goenner, F.; Schroth, G.; Heid, O.

    1999-01-01

    Diffusion-weighted MRI (DWI) is becoming important for assessment of acute stroke. Until recently single-shot DWI required expensive technology such as echo-planar imaging (EPI) available only at some research sites. A new medium-field (1.0 T) short-bore MR imager has been developed with which DWI data sets can be acquired. We prospectively studied 169 patients on this 1.0 T commercial system. After conventional imaging, DWI was performed with a single-shot multi-slice sequence with b values 0 an 900 s/mm 2 , and with the gradients switched in three directions. The apparent diffusion coefficients were calculated with online calculation software. There were 50 patients with totally normal MRI, and 17 had strokes, these strokes were detected as areas of high signal on the images at a maximal b value. There was a drop in the ADC in ischaemic regions: in subacute infarcts, the values were between 0.41 and 0.531 x 10 - 3 mm 2 /s. In old infarcts the ADC was 1.15 x 10 - 3 mm 2 /s. Cerebrospinal fluid (CSF) gave low signal whereas areas in the brain had more intermediate intensities (CSF: 3.00; deep white matter: 0.75, cortical grey matter: 0.80, basal ganglia (thalamus): 0.70 and cerebellar white matter: 0.65 x 10 - 3 mm 2 /s). Anisotropy was detected as areas of restricted diffusion along the tracts. These preliminary data show that DWI can be aquired successfully on a medium-field short-bore system. This should allow the technique to be implemented at more sites, therefore facilitating the diagnosis of acute stroke and rendering early intervention feasible. (orig.)

  5. Facing spousal cancer during child-rearing years: The short-term effects of the Cancer-PEPSONE programme-a single-center randomized controlled trial.

    Science.gov (United States)

    Senneseth, Mette; Dyregrov, Atle; Laberg, Jon; Matthiesen, Stig B; Pereira, Mariana; Hauken, May A

    2017-10-01

    To measure the short-term effects of the Cancer-PEPSONE programme (CPP) on the partners' received and perceived social support, psychological distress, and quality of life (QOL), as well as explore the role of received social support as a mediator of the intervention effects. Open single-center randomized controlled trial, trial number 15982171(ISRCTN). Eligible participants were the partners of cancer patients who were concomitantly caring for minors (the well parents). The sample consisted of 35 participants randomly allocated to receive either intervention (n = 17) or support as usual (n = 18). At the 3-month follow-up (approximately 1 month after intervention), 24 continued to participate (intervention n = 13, control n = 11). The intervention group selected supporters to participate in CPP (N = 130). Data were obtained using validated questionnaire. The multivariate analysis of covariance revealed significant intervention effects (P = .03, η 2 p  = 0.42), with main effects on received and perceived social support. A mediational analysis suggested that CPP may have indirect effects on QOL through received social support. Even though the long-term effects are yet to be studied, CPP seems to increase social support for the well parents' short term, which in turn may improve their QOL. Given the study's low sample size, further replications in larger samples are required. Copyright © 2016 John Wiley & Sons, Ltd.

  6. Electrical Safety and Arc Flash Protections

    Energy Technology Data Exchange (ETDEWEB)

    R. Camp

    2008-03-04

    Over the past four years, the Electrical Safety Program at PPPL has evolved in addressing changing regulatory requirements and lessons learned from accident events, particularly in regards to arc flash hazards and implementing NFPA 70E requirements. This presentation will discuss PPPL's approaches to the areas of electrical hazards evaluation, both shock and arc flash; engineered solutions for hazards mitigation such as remote racking of medium voltage breakers, operational changes for hazards avoidance, targeted personnel training and hazard appropriate personal protective equipment. Practical solutions for nominal voltage identification and zero voltage checks for lockout/tagout will also be covered. Finally, we will review the value of a comprehensive electrical drawing program, employee attitudes expressed as a personal safety work ethic, integrated safety management, and sustained management support for continuous safety improvement.

  7. Electrical Safety and Arc Flash Protections

    International Nuclear Information System (INIS)

    Camp, R.

    2008-01-01

    Over the past four years, the Electrical Safety Program at PPPL has evolved in addressing changing regulatory requirements and lessons learned from accident events, particularly in regards to arc flash hazards and implementing NFPA 70E requirements. This presentation will discuss PPPL's approaches to the areas of electrical hazards evaluation, both shock and arc flash; engineered solutions for hazards mitigation such as remote racking of medium voltage breakers, operational changes for hazards avoidance, targeted personnel training and hazard appropriate personal protective equipment. Practical solutions for nominal voltage identification and zero voltage checks for lockout/tagout will also be covered. Finally, we will review the value of a comprehensive electrical drawing program, employee attitudes expressed as a personal safety work ethic, integrated safety management, and sustained management support for continuous safety improvement.

  8. Scattering Correction For Image Reconstruction In Flash Radiography

    International Nuclear Information System (INIS)

    Cao, Liangzhi; Wang, Mengqi; Wu, Hongchun; Liu, Zhouyu; Cheng, Yuxiong; Zhang, Hongbo

    2013-01-01

    Scattered photons cause blurring and distortions in flash radiography, reducing the accuracy of image reconstruction significantly. The effect of the scattered photons is taken into account and an iterative deduction of the scattered photons is proposed to amend the scattering effect for image restoration. In order to deduct the scattering contribution, the flux of scattered photons is estimated as the sum of two components. The single scattered component is calculated accurately together with the uncollided flux along the characteristic ray, while the multiple scattered component is evaluated using correction coefficients pre-obtained from Monte Carlo simulations.The arbitrary geometry pretreatment and ray tracing are carried out based on the customization of AutoCAD. With the above model, an Iterative Procedure for image restORation code, IPOR, is developed. Numerical results demonstrate that the IPOR code is much more accurate than the direct reconstruction solution without scattering correction and it has a very high computational efficiency

  9. Thermal Conductivity Based on Modified Laser Flash Measurement

    Science.gov (United States)

    Lin, Bochuan; Ban, Heng; Li, Chao; Scripa, Rosalia N.; Su, Ching-Hua; Lehoczky, Sandor L.

    2005-01-01

    The laser flash method is a standard method for thermal diffusivity measurement. It employs single-pulse heating of one side of a thin specimen and measures the temperature response of the other side. The thermal diffusivity of the specimen can be obtained based on a one-dimensional transient heat transfer analysis. This paper reports the development of a theory that includes a transparent reference layer with known thermal property attached to the back of sample. With the inclusion of heat conduction from the sample to the reference layer in the theoretical analysis, the thermal conductivity and thermal diffusivity of sample can be extracted from the temperature response data. Furthermore, a procedure is established to select two points from the data to calculate these properties. The uncertainty analysis indicates that this method can be used with acceptable levels of uncertainty.

  10. Scattering Correction For Image Reconstruction In Flash Radiography

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Liangzhi; Wang, Mengqi; Wu, Hongchun; Liu, Zhouyu; Cheng, Yuxiong; Zhang, Hongbo [Xi' an Jiaotong Univ., Xi' an (China)

    2013-08-15

    Scattered photons cause blurring and distortions in flash radiography, reducing the accuracy of image reconstruction significantly. The effect of the scattered photons is taken into account and an iterative deduction of the scattered photons is proposed to amend the scattering effect for image restoration. In order to deduct the scattering contribution, the flux of scattered photons is estimated as the sum of two components. The single scattered component is calculated accurately together with the uncollided flux along the characteristic ray, while the multiple scattered component is evaluated using correction coefficients pre-obtained from Monte Carlo simulations.The arbitrary geometry pretreatment and ray tracing are carried out based on the customization of AutoCAD. With the above model, an Iterative Procedure for image restORation code, IPOR, is developed. Numerical results demonstrate that the IPOR code is much more accurate than the direct reconstruction solution without scattering correction and it has a very high computational efficiency.

  11. Flash evaporation of liquid monomer particle mixture

    Science.gov (United States)

    Affinito, John D.; Darab, John G.; Gross, Mark E.

    1999-01-01

    The present invention is a method of making a first solid composite polymer layer. The method has the steps of (a) mixing a liquid monomer with particles substantially insoluble in the liquid monomer forming a monomer particle mixture; (b) flash evaporating the particle mixture and forming a composite vapor; and (c) continuously cryocondensing said composite vapor on a cool substrate and cross-linking the cryocondensed film thereby forming the polymer layer.

  12. Mass flow determination in flashing openings

    OpenAIRE

    G Polanco; A Holdø; G Munday

    2016-01-01

    The output flow characteristics in most of the industrial accidental releasesare related to a two-phase flow and their represent a potential hazard tofacilities, personnel, equipments and environment. If these releases involvesuperheated liquid then a flashing process can take place, where a liquidgasmixture due to the breaking of the metastable state can significantlyaffect the hazard zone. The calculation of the conditions for the flow after aflashing opening is very relevant in order to un...

  13. Evaluation of Flash Bainite in 4130 Steel

    Science.gov (United States)

    2011-07-01

    and Gleeble heat affected zone tests were performed on AISI 4130 steel plate. When possible, testing was baselined against conventional quench and...Diffraction Report 34 APPENDIX F Charpy V-Notch Test Results on Flash Bainite and Q&T 4130 Plate 38 APPENDIX G Charpy V-Notch Test Results on Gleeble...provides recommendations for future testing . EXPERIMENTAL PROCEDURE Gary Cola, Sirius Protection LLC, provided 4130 steel plates to ARDEC. Both

  14. ADVANCES OF FLASH LIDAR DEVELOPMENT ONBOARD UAV

    Directory of Open Access Journals (Sweden)

    G. Zhou

    2012-07-01

    Full Text Available A small cost-low civilian UAV (Unmanned Aerial Vehicle - UAV platform usually requests that all carried components should be light in weight, small in volume, and efficient in energy. This paper presents the advance of a pre-mature of flash LiDAR system including laser emitting system, associate with the pulsed voltage technology. A complete laser emitting system, including laser diode, conic lens, alignment, divergence angle, etc., has been designed and implemented. The laser emitting system is first simulated and tested using 3D-Tool software, and then manufactured by an industrial company. In addition, a novel power supply topology based on two coupled coils, pulse generator circuit, and a fast switch, is proposed since several 100 V in voltage, 10-100 A in current, several hundred millisecond in pulse width is needed for flash LiDAR system onboard a small low-cost civilian UAV platform, and the traditional power supply had problems in efficiency and bulk. Finally, laser emitting and the power supply are assembled and tested. The size of laser footprint is 4398.031 mm x 4398.031 mm in x and y axes, respectively, when shitting from a flight height of 300 m, which is close to the theoretic size of 4.5 m x 4.5 m. The difference of 102 mm can meet the requirement of flash LiDAR data collection at a flight height of 300 m. Future work on extensive and on-going investigation and investments for a prototype of flash LiDAR system is drawn up as well.

  15. Flash CS3 The Missing Manual

    CERN Document Server

    Grover, Chris

    2008-01-01

    Flash CS3, the latest version of the premier tool for creating web animations and interactive web sites, can be intimidating to learn. This entertaining reference tutorial provides a reader-friendly animation primer and a guided tour of all the program's tools and capabilities. Beginners will learn to use the software in no time, and experienced users will quickly take their skills to the next level.

  16. Oil from coal by flash pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Smith, I.W. (and others)

    1985-12-01

    This report summarizes the final stage of the NERDDP-funded work on coal liquefaction by flash pyrolysis. A working model pyrolyser, simulating a full-scale unit, has been operated over extended periods with Liddell and Piercefield (NSW), Acland, Millmerran and Macalister (Qld), and Loy Yang (Vic) coals. For several of the coals pyrolysed process heat was generated by combustion of some of the by-product char. Tar from Millmerran, Piercefield, Loy Yang, and Yallourn coals, produced in a separate pilot-scale pyrolyser, have been hydrogenated in continuous reactors to produce synthetic crude oils. Chars from Millmerran and Macalister sub-bituminous coals have been burned in the pilot-scale furnace with results as satisfactory as for the parent coals. The report shows that the flash pyrolysis method of making oil from coal is technically feasible, but cost studies show that in the present economic environment this method produces oil some three to four times more costly than natural oil. The report includes a summary of the overall CSIRO project of which this project formed a part, with emphasis on recent work of significance: e.g. methods of control of coke lay-down on tar hydrogenation catalysts; the combustion reactivity of pyrolysis chars; and various alternative uses of the flash pyrolysis method. Also included is an outline of related work carried out in other Australian and overseas laboratories, and a complete (to end of 1985) bibliography of all publications arising from the project.

  17. Sinus Floor Elevation with Modified Crestal Approach and Single Loaded Short Implants: A Case Report with 4 Years of Follow-Up

    Directory of Open Access Journals (Sweden)

    Michele Perelli

    2017-01-01

    Full Text Available Tooth extraction is usually followed by bone reduction. In the maxillary posterior region, this remodelling combined with sinus pneumatisation and periodontal defects may lead to a reduced basal bone height available for implant placement. Sinus floor elevation can be performed with different surgical techniques. Crestal approach has demonstrated to be effective, less invasive, and associated with a reduced morbidity. This article reports a modified sinus floor elevation by means of rotary, noncutting instruments, addition of xenograft, and 2 short-threaded implant placements. The aim of the study was to evaluate the implant’s success and intrasinus radiographical bone gain after 4 years of functional loading. The premolar implant site presented a starting basal bone height of 6 mm, while the molar site was of 2 mm. In the first surgical step, sinus floor elevation was performed mesially and the implant was inserted, and distally only sinus floor elevation was performed. After 6 months, the mesial implant was uncovered and the second implant was inserted; 4 months later, the second fixture was uncovered, and both fixtures were loaded with single provisional screw-retained crowns and later with single screw-retained porcelain fused to metal crowns. Implants integrated successfully, and crestal bone remodelling did not exceed the smooth collar. Bone gain was 3 mm for the mesial implant and more than 5 mm for the distal one.

  18. Acupuncture for hot flashes in patients with prostate cancer.

    Science.gov (United States)

    Beer, Tomasz M; Benavides, Maria; Emmons, Sandra L; Hayes, Margaret; Liu, Guohui; Garzotto, Mark; Donovan, Deirdre; Katovic, Nina; Reeder, Caron; Eilers, Kristine

    2010-11-01

    To determine the effect of acupuncture on hot flash frequency and intensity, quality of life, and sleep quality in patients undergoing hormonal therapy for prostate cancer. Hot flashes are a common adverse effect of hormonal therapy for prostate cancer. Men who had a hot flash score > 4 who were receiving androgen deprivation therapy for prostate cancer underwent acupuncture with electrostimulation biweekly for 4 weeks, then weekly for 6 weeks, using a predefined treatment plan. The primary endpoint was a 50% reduction in the hot flash score after 4 weeks of therapy, calculated from the patients' daily hot flash diaries. The hot flash-related quality of life and sleep quality and biomarkers potentially related to hot flashes, including serotonin, calcitonin gene-related peptide, and urinary 5-hydroxyindoleacetic acid, were examined. A total of 25 men were enrolled from September 2003 to April 2007. Of these, 22 were eligible and evaluable. After 4 weeks, 9 (41%, 95% confidence interval 21%-64%) of 22 patients had had a > 50% reduction in the hot flash score. Of the 22 patients, 12 (55%, 95% confidence interval 32%-76%) met this response definition at any point during the therapy course. No patient had a significant increase in hot flash score during therapy. A reduced hot flash score was associated with improvement in the hot flash-related quality of life and sleep quality. Multiple placebo-controlled trials have demonstrated a 25% response rate to placebo treatment for hot flashes. Of the 22 patients, 41% had responded by week 4 and 55% overall in the present pilot study, providing evidence of a potentially meaningful benefit. Additional studies of acupuncture for hot flashes in this population are warranted. Copyright © 2010 Elsevier Inc. All rights reserved.

  19. Use of short implants (6 mm) in a single-tooth replacement: a 5-year follow-up prospective randomized controlled multicenter clinical study.

    Science.gov (United States)

    Rossi, Fabio; Botticelli, Daniele; Cesaretti, Gianfranco; De Santis, Enzo; Storelli, Stefano; Lang, Niklaus P

    2016-04-01

    To evaluate prospectively clinical and radiographic outcomes of 6- or 10 mm-long implants with moderately rough surface (SLA(®) ) loaded within 7 weeks from installation and supporting single crowns in the posterior regions in the course of 5 years of loading. Sixty implants with a moderately rough surface, 30 tests (6 mm long, 4.1 mm in diameter) and 30 controls (10 mm long, 4.1 mm in diameter), were placed in posterior regions in 45 patients. After 6 weeks, impressions were taken and the implants were restored with a single fixed prosthesis made with gold-palladium alloy and porcelain. Survival rate and marginal bone loss were evaluated yearly. The clinical crown/implant ratio was calculated. During the follow-up period, five implants, four tests and one control, were lost. Of the four test implants, one was lost before loading, two between the 2nd and the 3rd years, and one during the 4th year of the follow-up period. The control implant was lost during the first year of function. Consequently, after 5 years of follow-up, a survival rate of 86.7% and 96.7% was observed at the test and control sites, respectively. The results of this study showed that 6-mm-long implants supporting single crowns loaded within 7 weeks from installation lose a small amount of marginal bone during 5 years of functional loading, similar to that of 10-mm-long implants. However, a higher degree of implant loss was recorded at the short implants, probably due to the fracturing of the surrounding bone. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. On the Relation Between GRB Classes and X-ray Flashes

    Directory of Open Access Journals (Sweden)

    Z. Bagoly

    2012-01-01

    Full Text Available Gamma-ray bursts are usually classified into either short-duration or long-duration bursts. Going beyond the short-long classification scheme, it has been shown on statistical grounds that a third, intermediate population is needed in this classification scheme. We are looking for physical properties which discriminate the intermediate duration bursts from the other two classes. As the intermediate group is the softest, we argue that we have related them with X-ray flashes among the GRBs. We give a new, probabilistic definition for this class of events.

  1. GeckoFTL: Scalable Flash Translation Techniques For Very Large Flash Devices

    DEFF Research Database (Denmark)

    Dayan, Niv; Bonnet, Philippe; Idreos, Stratos

    2016-01-01

    thereby harming performance and device lifetime. In this paper, we identify a key component of the metadata called the Page Validity Bitmap (PVB) as the bottleneck. PVB is used by the garbage-collectors of state-of-the-art FTLs to keep track of which physical pages in the device are invalid. PVB...... Gecko. Logarithmic Gecko is similar to an LSM-tree in that it first logs updates and later reorganizes them to ensure fast and scalable access time. Relative to the baseline of storing PVB in flash, Logarithmic Gecko enables cheaper updates at the cost of slightly more expensive garbage......-collection queries. We show that this is a good trade-off because (1) updates are intrinsically more frequent than garbage-collection queries to page validity metadata, and (2) flash writes are more expensive than flash reads. We demonstrate analytically and empirically through simulation that GeckoFTL achieves a 95...

  2. A Comparative Study of Reduced Variables Based Flash and Conventional Flash

    DEFF Research Database (Denmark)

    Michelsen, Michael Locht; Yan, Wei; Stenby, Erling Halfdan

    with a smaller set of independent variables. Various versions of the reduced variables methods have been proposed since the mid 80’s. The methods were first proposed for cubic equations of state (EoS) with zero binary interaction parameters (BIPs) and later generalized to situations with non-zero BIP matrices....... Most of the studies in the last decade suggest that the reduced variables methods are much more efficient than the conventional flash method. However, Haugen and Beckner questioned the advantages of the reduced variables methods in their recent paper (SPE 141399). A fair comparison between the reduced...... variables based flash and the conventional flash is not straightforward since the former is difficult to be formulated as unconstrained minimization and involves more complicated composition derivatives. With the recent formulations by Nichita and Graciaa (2010), it is possible to code the reduced variables...

  3. Energy optimization of crude oil distillation using different designs of pre-flash drums

    International Nuclear Information System (INIS)

    Al-Mayyahi, Mohmmad A.; Hoadley, Andrew F.A.; Rangaiah, G.P.

    2014-01-01

    The Crude Distillation Unit (CDU) is among the major CO 2 emitters in any petroleum refinery. In view of the simultaneous increase in the energy cost and environmental concerns, there is strong motivation to analyse alternative methods to improve the energy efficiency and consequently, to minimize CO 2 emissions from conventional crude distillation. Crude pre-flashing is among promising techniques for minimizing the heating energy requirements of the CDU. However, this might be at the cost of product yield and/or throughput. This paper investigates the effects of using different pre-flash designs on the energy efficiency and associated CO 2 emissions of the CDU. The resulting optimal solutions are presented and their significant features are discussed. - Highlights: • Single and multiple pre-flash designs of the crude distillation unit are studied. • The trade-off between CO 2 emissions and the residue yield has been investigated. • Multi-objective optimization was used to find the trade-off solutions. • Introducing crude pre-flashing reduces the total CO 2 emissions. • Optimum vapour feed location has been investigated

  4. Coupling Radar Rainfall Estimation and Hydrological Modelling For Flash-flood Hazard Mitigation

    Science.gov (United States)

    Borga, M.; Creutin, J. D.

    Flood risk mitigation is accomplished through managing either or both the hazard and vulnerability. Flood hazard may be reduced through structural measures which alter the frequency of flood levels in the area. The vulnerability of a community to flood loss can be mitigated through changing or regulating land use and through flood warning and effective emergency response. When dealing with flash-flood hazard, it is gener- ally accepted that the most effective way (and in many instances the only affordable in a sustainable perspective) to mitigate the risk is by reducing the vulnerability of the involved communities, in particular by implementing flood warning systems and community self-help programs. However, both the inherent characteristics of the at- mospheric and hydrologic processes involved in flash-flooding and the changing soci- etal needs provide a tremendous challenge to traditional flood forecasting and warning concepts. In fact, the targets of these systems are traditionally localised like urbanised sectors or hydraulic structures. Given the small spatial scale that characterises flash floods and the development of dispersed urbanisation, transportation, green tourism and water sports, human lives and property are exposed to flash flood risk in a scat- tered manner. This must be taken into consideration in flash flood warning strategies and the investigated region should be considered as a whole and every section of the drainage network as a potential target for hydrological warnings. Radar technology offers the potential to provide information describing rain intensities almost contin- uously in time and space. Recent research results indicate that coupling radar infor- mation to distributed hydrologic modelling can provide hydrologic forecasts at all potentially flooded points of a region. Nevertheless, very few flood warning services use radar data more than on a qualitative basis. After a short review of current under- standing in this area, two

  5. Positive cloud-to-ground lightning flashes in severe storms

    Science.gov (United States)

    Rust, W. D.; Macgorman, D. R.; Arnold, R. T.

    1981-01-01

    The occurrence of cloud-to-ground flashes that effectively lower positive charge to earth (+CG flash) over flat terrain has been documented in the mature stage of severe thunderstorms. Of the 31 documented +CG flashes, most had only one return stroke. Zero-to-peak rise times for the strokes averaged 7 microsec. The +CG flashes averaged 520 ms in duration, with 25 percent lasting more than 800 ms. Many of these had field changes suggestive of continuing current. Positive flashes have been observed to emanate from several regions of severe storms: high on the back of the main storm tower, through the wall cloud, and from the downshear anvil. Visually most of these positive flashes have emanated from high in the storm, and acoustic mapping of two shows thunder sources to a height of about 15 km.

  6. Flash memories economic principles of performance, cost and reliability optimization

    CERN Document Server

    Richter, Detlev

    2014-01-01

    The subject of this book is to introduce a model-based quantitative performance indicator methodology applicable for performance, cost and reliability optimization of non-volatile memories. The complex example of flash memories is used to introduce and apply the methodology. It has been developed by the author based on an industrial 2-bit to 4-bit per cell flash development project. For the first time, design and cost aspects of 3D integration of flash memory are treated in this book. Cell, array, performance and reliability effects of flash memories are introduced and analyzed. Key performance parameters are derived to handle the flash complexity. A performance and array memory model is developed and a set of performance indicators characterizing architecture, cost and durability is defined.   Flash memories are selected to apply the Performance Indicator Methodology to quantify design and technology innovation. A graphical representation based on trend lines is introduced to support a requirement based pr...

  7. Onset conditions for flash sintering of UO2

    Science.gov (United States)

    Raftery, Alicia M.; Pereira da Silva, João Gustavo; Byler, Darrin D.; Andersson, David A.; Uberuaga, Blas P.; Stanek, Christopher R.; McClellan, Kenneth J.

    2017-09-01

    In this work, flash sintering was demonstrated on stoichiometric and non-stoichiometric uranium dioxide pellets at temperatures ranging from room temperature (26 °C) up to 600 °C . The onset conditions for flash sintering were determined for three stoichiometries (UO2.00, UO2.08, and UO2.16) and analyzed against an established thermal runaway model. The presence of excess oxygen was found to enhance the flash sintering onset behavior of uranium dioxide, lowering the field required to flash and shortening the time required for a flash to occur. The results from this study highlight the effect of stoichiometry on the flash sintering behavior of uranium dioxide and will serve as the foundation for future studies on this material.

  8. TID and SEE Response of an Advanced Samsung 4G NAND Flash Memory

    Science.gov (United States)

    Oldham, Timothy R.; Friendlich, M.; Howard, J. W.; Berg, M. D.; Kim, H. S.; Irwin, T. L.; LaBel, K. A.

    2007-01-01

    Initial total ionizing dose (TID) and single event heavy ion test results are presented for an unhardened commercial flash memory, fabricated with 63 nm technology. Results are that the parts survive to a TID of nearly 200 krad (SiO2), with a tractable soft error rate of about 10(exp -l2) errors/bit-day, for the Adams Ten Percent Worst Case Environment.

  9. Unattached fraction of short-lived Rn decay products in indoor and outdoor environments: An improved single-screen method and results

    International Nuclear Information System (INIS)

    Reineking, A.; Porstendoerfer, J.

    1990-01-01

    The unattached fraction fp of potential alpha energy of short-lived Rn decay products was measured under realistic, natural conditions in different dwellings and in the open atmosphere by a single-screen technique. An improved data evaluation method was developed where the measured activities of 218 Po (RaA) and 214 Pb (RaB) were corrected by the screen-attached activities of 214 Bi ( 214 Po) [RaC (RaC')]. This method is based on the experimental observation that the 214 Bi ( 214 Po) unattached activities are negligible under realistic living conditions and that the size distributions of the aerosol-attached activities of all short-lived Rn daughters are identical. In closed rooms without additional aerosol sources, a mean unattached fraction fp of the potential alpha energy of 0.096 was obtained at a mean aerosol particle concentration of 6100 cm-3 and at a mean equilibrium factor F of 0.30. This mean fp value is about three times higher than the value used in the literature for the radiation exposure calculation of the human public. In closed rooms with additional aerosol sources (cigarette smoke, heating systems, aerosols from a burning candle), the aerosol particle concentrations ranged up to 10(6) cm-3 and the attachment rates, X, increased up to 1000 h-1. The fp values sometimes decreased below the detection limit of 0.005, and the F values increased to as high as 0.77. In the ambient atmosphere in the vicinity of Goettingen, a mean unattached fraction fp of 0.02 and a mean aerosol particle concentration of 3.4 x 10(4) cm-3 were measured at 1 m above the ground. The mean equilibrium factor F was determined to be 0.7.A

  10. Clinical Results and Technical Complications of Posterior Implant-Supported Modified Monolithic Zirconia Single Crowns and Short-Span Fixed Dental Prostheses: A 2-Year Pilot Study.

    Science.gov (United States)

    Cheng, Chih-Wen; Chien, Chia-Hui; Chen, Chun-Jung; Papaspyridakos, Panos

    2018-02-01

    The purpose of this clinical trial was to investigate the clinical outcomes of implant-supported modified monolithic zirconia single crowns (SCs) and short-span fixed dental prostheses (FDPs) after a follow-up of 2 years. Twenty-seven patients in need of implant-supported SCs or 3-unit FDPs in the posterior maxilla or mandible were consecutively selected for this study. A total of 56 modified monolithic zirconia prostheses including 44 SCs (8 screw-retained, 36 cement-retained) and twelve 3-unit FDPs (5 screw-retained, 7 cement-retained) were included in this study. All patients were followed at 6 months, 12 months, 18 months, and 2 years after placement of the modified monolithic zirconia prostheses. During the follow-up period, all prostheses were evaluated with clinical and radiographic examinations. The following technical parameters were assessed: framework fracture, fracture of veneering porcelain, screw loosening, loss of retention because of prosthesis de-cementation and opposing tooth fracture. No implant was lost during the follow-up period, yielding a 2-year implant survival of 100%. One FDP failed because of framework fracture. The overall prosthesis survival rate was 98.2% after 2 years of clinical service. During the study, 5 complication events were observed in 3 SCs and one FDP, including one fracture of veneering porcelain and 2 screw loosenings in 3 SCs, and loss of retention and opposing tooth fracture in the same FDP. Therefore, the complication-free rate of prostheses was 91.1%. According to the results of this study, the modified monolithic zirconia design used in this study resulted in a favorable short-term outcome for posterior implant-supported SCs and 3-unit FDPs. © 2017 by the American College of Prosthodontists.

  11. Flash autoclave settings may influence eradication but not presence of well-established biofilms on orthopaedic implant material.

    Science.gov (United States)

    Williams, Dustin L; Taylor, Nicholas B; Epperson, Richard T; Rothberg, David L

    2017-10-04

    Flash autoclaving is one of the most frequently utilized methods of sterilizing devices, implants or other materials. For a number of decades, it has been common practice for surgeons to remove implantable devices, flash autoclave and then reimplant them in a patient. Data have not yet indicated the potential for biofilms to survive or remain on the surface of orthopaedic-relevant materials following flash autoclave. In this study, monomicrobial and polymicrobial biofilms were grown on the surface of clinically relevant titanium materials and exposed to flash autoclave settings that included varying times and temperatures. Data indicated that when the sterilization and control temperatures of an autoclave were the same, biofilms were able to survive flash autoclaving that was performed for a short duration. Higher temperature and increased duration rendered biofilms non-viable, but none of the autoclave settings had the ability to remove or disperse the presence of biofilms from the titanium surfaces. These findings may be beneficial for facilities, clinics, or hospitals to consider if biofilms are suspected to be present on materials or devices, in particular implants that have had associated infection and are considered for re-implantation. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  12. Simple flash evaporator for making thin films of compounds

    Energy Technology Data Exchange (ETDEWEB)

    Hemanadhan, M.; Bapanayya, Ch.; Agarwal, S. C. [Department of Physics, Indian Institute of Technology, Kanpur 208016 (India)

    2010-07-15

    A simple and compact arrangement for flash evaporation is described. It uses a cell phone vibrator for powder dispensing that can be incorporated into a vacuum deposition chamber without any major alterations. The performance of the flash evaporation system is checked by making thin films of the optical memory chalcogenide glass Ge{sub 2}Sb{sub 2}Te{sub 5} (GST). Energy dispersive x-ray analysis shows that the flash evaporation preserves the stoichiometry in thin films.

  13. Efficacy of ultra-short single agent regimen antibiotic chemo-prophylaxis in reducing the risk of meningitis in patients undergoing endoscopic endonasal transsphenoidal surgery.

    Science.gov (United States)

    Somma, Teresa; Maraolo, Alberto Enrico; Esposito, Felice; Cavallo, Luigi Maria; Tosone, Grazia; Orlando, Raffaele; Cappabianca, Paolo

    2015-12-01

    The study aims to evaluate the incidence of infectious complications (namely meningitis) within 30 days after endoscopic endonasal transspheinodal neurosurgery (EETS) in patients receiving an ultra-short peri-operative chemo-prophylaxis regimen with 2 doses of 1st generation cephalosporin or macrolide. We retrospectively analyzed the clinical records of 145 patients who received an ultra-short chemoprophylaxis with two doses of an antibiotic, given 30 min before and 8h after EETS, over a 30-month time-frame. Ninety-seven patients (66.89%) received endovenous cefazolin, a 1st generation cephalosporin, administered at a dosage of 1000 mg, and 48 patients (33.10%) with an history of allergy to various agents, received endovenous clarithromycin at a dosage of 500 mg. No case of peri- and post-operative meningitis occurred in patients receiving the 2 doses of antibiotic. Only one patient (0.68%) developed cerebral fluid leakage on the 7th postoperative day, which required the switching to a broad-spectrum antibiotic prophylaxis for one week; this patient received the ultrashort prophylaxis with a macrolide. In addition, 7 patients (4.82%) developed minor infectious complications such as low-grade fever (3 cases, all of them receiving cefazolin), enlarged submandibular and cervical lymphnodes (3 cases, all of them receiving cefazolin), and upper and lower respiratory tract infection (1 case receiving clarithromycin). The cost of this prophylaxis regimen ranged from 7.76 Euro (cefazolin) to 39.54 Euro (clarithromycin). This study suggested that an ultra-short single-antibiotic prophylaxis is a safe, cheap and effective regimen to prevent post-operative meningitis in patients undergoing EETS and who do not require lumbar drainage after surgery. In these patients also the rate of minor infective complications was acceptable when compared with the previous more expensive regimen based on 3rd generation cephalosporin plus aminoglycoside or alone, that could be suitable only

  14. The echo-enabled harmonic generation options for FLASH II

    International Nuclear Information System (INIS)

    Deng, Haixiao; Decking, Winfried; Faatz, Bart

    2011-03-01

    FLASH II is an upgrade to the existing free electron laser (FEL) FLASH. The echo-enabled harmonic generation (EEHG) scheme is proposed to be a potential seeding option of FLASH II. In this paper, the possibility of EEHG operation of FLASH II is investigated for the first time. With a combination of existing numerical codes, i.e. a laser-beam interaction code in an undulator (LBICU), a beam tracking code in a chicane (ELEGANT) and an universal FEL simulating code (GENESIS), the effects of beam energy chirp and coherent synchrotron radiation (CSR) on EEHG operation are studied as well. In addition, several interesting issues concerning EEHG simulation are discussed. (orig.)

  15. Flash CS5.5 The Missing Manual

    CERN Document Server

    Grover, Chris

    2011-01-01

    You can build everything from simple animations to full-fledged iOS and Android apps with Flash CS5.5, but learning this complex program can be difficult-unless you have this fully updated, bestselling guide. Learn how to create gorgeous Flash effects even if you have no programming experience. With Flash CS5.5: The Missing Manual, you'll move from the basics to power-user tools with ease. Learn animation basics. Discover how to turn simple ideas into stunning animations.Master Flash's tools. Learn the animation and effects tools with clear explanations and hands-on examples.Use 3D effects. R

  16. The Evolution and Structure of Extreme Optical Lightning Flashes.

    Science.gov (United States)

    Peterson, Michael; Rudlosky, Scott; Deierling, Wiebke

    2017-12-27

    This study documents the composition, morphology, and motion of extreme optical lightning flashes observed by the Lightning Imaging Sensor (LIS). The furthest separation of LIS events (groups) in any flash is 135 km (89 km), the flash with the largest footprint had an illuminated area of 10,604 km 2 , and the most dendritic flash has 234 visible branches. The longest-duration convective LIS flash lasted 28 s and is overgrouped and not physical. The longest-duration convective-to-stratiform propagating flash lasted 7.4 s, while the longest-duration entirely stratiform flash lasted 4.3 s. The longest series of nearly consecutive groups in time lasted 242 ms. The most radiant recorded LIS group (i.e., "superbolt") is 735 times more radiant than the average group. Factors that impact these optical measures of flash morphology and evolution are discussed. While it is apparent that LIS can record the horizontal development of the lightning channel in some cases, radiative transfer within the cloud limits the flash extent and level of detail measured from orbit. These analyses nonetheless suggest that lightning imagers such as LIS and Geostationary Lightning Mapper can complement ground-based lightning locating systems for studying physical lightning phenomena across large geospatial domains.

  17. Attribution of the rapid increase in flash droughts over China

    Science.gov (United States)

    Wang, Linying; Yuan, Xing

    2017-04-01

    Recently, a rapidly developing drought that is termed as "flash drought" occurs frequently in many regions across the world and has become a hot topic. The occurrence of flash drought is often triggered by heatwave and accompanied with low soil moisture and high evapotranspiration (ET). Due to its rapid onset and unusual intensity, the impact of flash drought can be devastating in some cases. Here, we investigate the long-term trend and variability of flash droughts over China based on pentad-mean surface air temperature observations from over two thousand meteorological stations as well as soil moisture and ET estimations from multiple global reanalysis products. Flash droughts are most likely to occur over humid and semi-humid regions in China. Flash drought events averaged over China have increased by 109% from 1979 to 2010, and the increase is mainly due to a long term warming of temperature (50%), followed by the contributions from decreasing soil moisture and increasing ET. To quantify the contributions of anthropogenic and/or natural drivers for flash drought, the Community Land Model version 4.5 (CLM4.5) is being forced by multiple climate models that participated in the Coupled Model Intercomparison Project Phase 5 to provide consistent soil moisture and ET data under different forcing scenarios, and an optimal fingerprinting detection method is being used to analyze the flash drought simulations. Preliminary results indicate that anthropogenic activities have exacerbated flash drought conditions over China in recent decades.

  18. Analisis dan Reduksi Bahaya ARC Flash pada Sistem Kelistrikan

    Directory of Open Access Journals (Sweden)

    Firman Aji Prasongko

    2012-09-01

    Full Text Available Upaya terakhir untuk menghitung bahaya yang berhubungan dengan potensi bahaya arc flash bergantung pada proteksi arus lebih untuk menghilangkan kondisi saat diberi gangguan. Efektivitas berbagai perangkat ditentukan oleh clearing time terkait dengan gangguan arus maksimum yang ada untuk setiap lokasi sistem. Industri komersial mulai melakukan prosedur pelabelan arc flash dan mulai mengenali pencegahan arc flash sebagai bagian dari program safety, perhitungan current method memungkinkan untuk menghitung incident energy (cal/cm² terkait dengan gangguan maksimum tiga phasa. Kesalahan terbanyak adalah besaran arus kurang dari besaran arus tiga phasa maksimum. Dalam Tugas Akhir ini akan dibahas perhitungan energy dan durasi lama terjadinya arc flash pada system kelistrikan pada electrical room.

  19. The Evolution and Structure of Extreme Optical Lightning Flashes

    Science.gov (United States)

    Peterson, Michael; Rudlosky, Scott; Deierling, Wiebke

    2017-12-01

    This study documents the composition, morphology, and motion of extreme optical lightning flashes observed by the Lightning Imaging Sensor (LIS). The furthest separation of LIS events (groups) in any flash is 135 km (89 km), the flash with the largest footprint had an illuminated area of 10,604 km2, and the most dendritic flash has 234 visible branches. The longest-duration convective LIS flash lasted 28 s and is overgrouped and not physical. The longest-duration convective-to-stratiform propagating flash lasted 7.4 s, while the longest-duration entirely stratiform flash lasted 4.3 s. The longest series of nearly consecutive groups in time lasted 242 ms. The most radiant recorded LIS group (i.e., "superbolt") is 735 times more radiant than the average group. Factors that impact these optical measures of flash morphology and evolution are discussed. While it is apparent that LIS can record the horizontal development of the lightning channel in some cases, radiative transfer within the cloud limits the flash extent and level of detail measured from orbit. These analyses nonetheless suggest that lightning imagers such as LIS and Geostationary Lightning Mapper can complement ground-based lightning locating systems for studying physical lightning phenomena across large geospatial domains.

  20. Cell and Tissue Damage after Skin Exposure to Ionizing Radiation: Short- and Long-Term Effects after a Single and Fractional Doses.

    Science.gov (United States)

    Kinoshita, Kahori; Ishimine, Hisako; Shiraishi, Kenshiro; Kato, Harunosuke; Doi, Kentaro; Kuno, Shinichiro; Kanayama, Koji; Mineda, Kazuhide; Mashiko, Takanobu; Feng, Jingwei; Nakagawa, Keiichi; Kurisaki, Akira; Itami, Satoshi; Yoshimura, Kotaro

    2014-01-01

    Ionizing radiation is often used to treat progressive neoplasms. However, the consequences of long-term radiation exposure to healthy skin tissue are poorly understood. We aimed to evaluate the short- and long-term radiation damage to healthy skin of the same irradiation given either as single or fractional doses. C57BL/J6 mice were randomly assigned to one of three groups: a control and two exposure groups (5 Gy ×2 or 10 Gy ×1). The inguinal area was irradiated (6-MeV beam) 1 week after depilation in the treatment groups. Skin samples were evaluated macroscopically and histologically for up to 6 months after the final exposure. After anagen hair follicle injury by irradiation, hair cycling resumed in both groups, but hair graying was observed in the 10 Gy ×1 group but not in the 5 Gy ×2 group, suggesting the dose of each fractional exposure is more relevant to melanocyte stem cell damage than the total dose. On the other hand, in the long term, the fractional double exposures induced more severe atrophy and capillary reduction in the dermis and subcutis, suggesting fractional exposure may cause more depletion of tissue stem cells and endothelial cells in the tissue. Thus, our results indicated that there were differences between the degrees of damage that occurred as a result of a single exposure compared with fractional exposures to ionizing radiation: the former induces more severe acute injury to the skin with irreversible depigmentation of hairs, while the latter induces long-term damage to the dermis and subcutis. © 2015 S. Karger AG, Basel.

  1. Muzzle flash localization for the dismounted soldier

    Science.gov (United States)

    Kennedy Scott, Will

    2015-05-01

    The ability to accurately and rapidly know the precise location of enemy fire would be a substantial capability enhancement to the dismounted soldier. Acoustic gun-shot detections systems can provide an approximate bearing but it is desired to precisely know the location (direction and range) of enemy fire; for example to know from `which window' the fire is coming from. Funded by the UK MOD (via Roke Manor Research) QinetiQ is developing an imaging solution built around an InGaAs camera. This paper presents work that QinetiQ has undertaken on the Muzzle Flash Locator system. Key technical challenges that have been overcome are explained and discussed in this paper. They include; the design of the optical sensor and processing hardware to meet low size, weight and power requirements; the algorithm approach required to maintain sensitivity whilst rejecting false alarms from sources such as close passing insects and sun glint from scene objects; and operation on the move. This work shows that such a sensor can provide sufficient sensitivity to detect muzzle flash events to militarily significant ranges and that such a system can be combined with an acoustic gunshot detection system to minimize the false alarm rate. The muzzle flash sensor developed in this work operates in real-time and has a field of view of approximately 29° (horizontal) by 12° (vertical) with a pixel resolution of 0.13°. The work has demonstrated that extension to a sensor with realistic angular rotation rate is feasible.

  2. Helium Extraction from LNG End Flash

    OpenAIRE

    Kim, Donghoi

    2014-01-01

    Helium is an invaluable element as it is widely used in industry such as cryo-genics and welding due to its unique properties. However, helium shortage is expected in near future because of increasing demand and the anxiety of sup-ply. Consequently, helium production has attracted the attention of industry. The main source of He is natural gas and extracting it from LNG end-flash is considered as the most promising way of producing crude helium. Thus, many process suppliers have proposed proc...

  3. 3D flash lidar imager onboard UAV

    Science.gov (United States)

    Zhou, Guoqing; Liu, Yilong; Yang, Jiazhi; Zhang, Rongting; Su, Chengjie; Shi, Yujun; Zhou, Xiang

    2014-11-01

    A new generation of flash LiDAR sensor called GLidar-I is presented in this paper. The GLidar-I has been being developed by Guilin University of Technology in cooperating with the Guilin Institute of Optical Communications. The GLidar-I consists of control and process system, transmitting system and receiving system. Each of components has been designed and implemented. The test, experiments and validation for each component have been conducted. The experimental results demonstrate that the researched and developed GLiDAR-I can effectively measure the distance about 13 m at the accuracy level about 11cm in lab.

  4. Determinants of Flash Flood Evacuation Choices and Assessment of Preferences for Flash Flood Warning Channels: The Case of Thailand

    OpenAIRE

    Kannika Thampanishvong

    2013-01-01

    The Southern part of Thailand, a region with tropical climate and monsoon, has often been affected by torrential rains caused by tropical storms, depressions, and typhoons. Such heavy rain is often accompanied by flash floods – sometimes occuring so suddenly and with an enormous amount of water – that make them particularly dangerous. Hence, flash flood warnings are important to prevent flash flood hazards from becoming disasters.These warnings can give individuals the much needed information...

  5. A new methodology to determine the isoeluotropic conditions on ultra-performance flash purification stationary phases from analytical reversed liquid chromatography stationary phase.

    Science.gov (United States)

    Héron, Sylvie; Charbonneau, Didier; Albisson, Pauline; Estievenart, Guillaume; Groni, Sihem; Tchapla, Alain

    2015-06-05

    Nowadays, the determination of the experimental chromatographic conditions to be used in Reversed Phase Liquid Ultra-Performance Flash Purification is still challenging. This is due to four different items. In most cases, flash purification stationary phases are not available with geometry of column used in analytical chromatography. The flash purification columns are single-use only. From the point of view of selectivity and retention, few RPLC phases exist with properties of separation identical for analytical and flash purification supports. Characterization methods and databases used for comparing analytical RPLC columns do not include stationary phases for RP flash purification columns. The goal of this work is to develop a new method development strategy which permits the determination of the experimental chromatographic conditions on RP ultra-performance flash purification columns. It relies on the knowledge of any isocratic conditions obtained on any given initial reversed stationary phase. The final conditions to implement on the RP ultra-performance flash purification phase enable either to keep the retention range of a selected solute constant, or to set it around a previously chosen value. The rules of transfer in linear gradient mode are also described. The methodology was valid, whatever the initial RP stationary and mobile phases, for different chemical classes, whatever the bonding, particle diameter, porous or core shell particle, towards different RP alkyl and analogues stationary and mobile phases. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Risk factors for single crowns supported by short (6-mm) implants in the posterior region: A prospective clinical and radiographic study.

    Science.gov (United States)

    Villarinho, Eduardo Aydos; Triches, Diego Fernandes; Alonso, Fernando Rizzo; Mezzomo, Luis André Mendonça; Teixeira, Eduardo Rolim; Shinkai, Rosemary Sadami Arai

    2017-08-01

    The use of short implants is still not a consensus for challenging clinical situations, such as unfavorable crown-to-implant (C/I) ratio. This prospective study evaluated the rates of prosthetic complications and implant failure, the mean marginal bone loss of 6-mm dental implants with single crowns in posterior regions and the potential risk factors. Forty-six dental implants, 6-mm long and 4.1-mm wide, were placed in the posterior region in 20 patients. Patients were clinically and radiographically examined after the restoration with single crowns and on a yearly basis. Potential risk factors (arch, bruxism, maximum bite force, anatomical and clinical C/I ratios, and occlusal table area) were analyzed according to the following outcomes: implant survival, bone loss, and prosthetic complications. The mean follow-up time was 45 ± 9 (16-57) months. There was no early loss of implants. After prosthetic loading, 4 implants were lost (2 in the mandible and 2 in the maxilla; 91.3% survival), and there were 13 prosthetic complications (28.3%), yielding a 65.2% success rate. The frailty term showed a 95% greater chance of loss in the mandible than the maxilla. Mean peri-implant bone loss was of 0.2 ± 0.4 mm, 0.1 ± 0.2 mm, 0.1 ± 0.3 mm, and 0.2 ± 0.4 mm in the first, second, third, and fourth years, respectively, with a mean cumulative loss of 0.3 ± 0.5 mm at 48 months. In the multilevel model, the effects of the clinical C/I ratio and time were significant for bone loss (P implants supporting single crowns performed well, but the mandible shows a higher risk of failure. The time and clinical C/I ratio are predictors for bone loss. © 2017 Wiley Periodicals, Inc.

  7. Characteristics of lightning flashes generating dancing sprites above thunderstorms

    Science.gov (United States)

    Soula, Serge; Mlynarczyk, Janusz; Füllekrug, Martin; Pineda, Nicolau; Georgis, Jean-François; van der Velde, Oscar; Montanyà, Joan; Fabro, Ferran

    2017-04-01

    During the night of October 29-30, 2013, a low-light video camera at Pic du Midi (2877 m) in the French Pyrénées, recorded TLEs above a very active storm over the Mediterranean Sea. The minimum cloud top temperature reached -73˚ C at ˜1600 UTC while its cloud to ground (CG) flash rate reached ˜30 fl min-1. Some sprite events with long duration are classified as dancing sprites. We analyze in detail the temporal evolution and estimated location of sprite elements for two cases of these events. They consist in series of sprite sequences with a duration that exceeds 1 second. By associating the cloud structure, the lightning activity, the electric field radiated in a broad range of low frequencies and the current moment waveform of the lightning strokes, some findings are highlighted: (i) In each series, successive sprite sequences reflect the occurrence time and location of individual positive lightning strokes across the stratiform region. (ii) The longer time-delayed (> 20 ms) sprite elements correspond to the lower impulsive charge moment changes (iCMC) of the parent stroke (< 200 C km) and they are shifted few tens of kilometres from their SP+CG stroke. However, both short and long time-delayed sprite elements also occur after strokes that produce a large iCMC and that are followed by a continuing current. (iii) The long time-delayed sprite elements produced during the continuing current correspond to surges in the current moment waveform. They occur sometimes at an altitude apparently lower than the previous short time-delayed sprite elements, possibly because of the lowered altitude of the ionosphere potential. (iv) The largest and brightest sprite elements produce significant current signatures, visible when their delay is not too short (˜3-5 ms).

  8. Flash pyrolysis fuel oil: BIO-POK

    Energy Technology Data Exchange (ETDEWEB)

    Gust, S. [Neste Oy, Porvoo (Finland)

    1995-12-31

    Flash pyrolysis oil from Ensyn Tech., Canada and Union Fenosa, Spain was combusted with simple pressure atomisation equipment commonly used with light fuel oils in intermediate size (0.1-1 MW) boilers. With a number of modifications to the combustion system, carbon monoxide (CO) and nitrous oxide (NO{sub x}) could be reduced to acceptable levels: CO < 30 ppm and NO{sub x} < 140 ppm. Particulate emissions which were initially very high (Bacharach 4-5) were reduced (Bach. 2-3) by system changes but are still higher than from light fuel oil (Bach. <1). The modifications to the combustion system were: acid resistant progressive cavity pump, higher oil preheat temperature and higher oil pressure than for light fuel oils, refractory section between burner and boiler warmed up to at least 800 deg C. In addition, it was necessary to store pyrolysis oil samples under inert conditions to prevent oxidation and to rinse nozzles with alcohol after shutdown to prevent coking. The complexity and cost of these system modifications are considered to be too great for current grades of flash pyrolysis oil to be sold as a light fuel oil replacement. Improvements to fuel quality will be necessary. The main improvements are lowering of viscosity and improving of stability

  9. Flash Infrared Thermography Contrast Data Analysis Technique

    Science.gov (United States)

    Koshti, Ajay

    2014-01-01

    This paper provides information on an IR Contrast technique that involves extracting normalized contrast versus time evolutions from the flash thermography inspection infrared video data. The analysis calculates thermal measurement features from the contrast evolution. In addition, simulation of the contrast evolution is achieved through calibration on measured contrast evolutions from many flat-bottom holes in the subject material. The measurement features and the contrast simulation are used to evaluate flash thermography data in order to characterize delamination-like anomalies. The thermal measurement features relate to the anomaly characteristics. The contrast evolution simulation is matched to the measured contrast evolution over an anomaly to provide an assessment of the anomaly depth and width which correspond to the depth and diameter of the equivalent flat-bottom hole (EFBH) similar to that used as input to the simulation. A similar analysis, in terms of diameter and depth of an equivalent uniform gap (EUG) providing a best match with the measured contrast evolution, is also provided. An edge detection technique called the half-max is used to measure width and length of the anomaly. Results of the half-max width and the EFBH/EUG diameter are compared to evaluate the anomaly. The information provided here is geared towards explaining the IR Contrast technique. Results from a limited amount of validation data on reinforced carbon-carbon (RCC) hardware are included in this paper.

  10. Nanocrystalline magnetic materials obtained by flash annealing

    Directory of Open Access Journals (Sweden)

    Murakami R.K.

    1999-01-01

    Full Text Available The aim of the present work was to produce enhanced-remanence nanocrystalline magnetic material by crystallizing amorphous or partially amorphous Pr4.5Fe77B18.5 alloys by the flash annealing process, also known as the dc-Joule heating process, and to determine the optimal conditions for obtaining good magnetic coupling between the magnetic phases present in this material. Ribbons of Pr4.5Fe77B18.5 were produced by melt spinning and then annealed for 10-30 s at temperatures 500 - 640 °C by passing current through the sample to develop the enhanced-remanence nanocrystalline magnetic material. These materials were studied by X-ray diffraction, differential thermal analysis and magnetic measurements. Coercivity increases of up to 15% were systematically observed in relation to furnace-annealed material. Two different samples were carefully examined: (i a sample annealed at 600 °C which showed the highest coercive field Hc and remanence ratio Mr/Ms and (ii a sample annealed at 520 °C which showed phase separation in the second quadrant demagnetization curve. Our results are in agreement with other studies which show that flash annealing improves the magnetic properties of some amorphous ferromagnetic ribbons.

  11. Microstructure of wood charcoal prepared by flash heating

    NARCIS (Netherlands)

    Kurosaki, F; Ishimaru, K; Hata, T; Bronsveld, P; Kobayashi, E; Imamura, Y

    2003-01-01

    Carbonized wood prepared by flash heating at 800 degreesC for I h shows a different microstructure and surface chemical structure than char formed after slow heating at 4 degreesC/min to 800 degreesC for I h. Flash heating produces pores that are surrounded by aggregates of carbon structures 25 to

  12. Flash radiographic technique applied to fuel injector sprays

    International Nuclear Information System (INIS)

    Vantine, H.C.

    1977-01-01

    A flash radiographic technique, using 50 ns exposure times, was used to study the pattern and density distribution of a fuel injector spray. The experimental apparatus and method are described. An 85 kVp flash x-ray generator, designed and fabricated at the Lawrence Livermore Laboratory, is utilized. Radiographic images, recorded on standard x-ray films, are digitized and computer processed

  13. Hot flashes: a review of pathophysiology and treatment modalities.

    Science.gov (United States)

    Morrow, Phuong Khanh H; Mattair, Danielle N; Hortobagyi, Gabriel N

    2011-01-01

    Many therapies are being studied for the treatment of hot flashes for individuals with cancer, yet few studies have demonstrated safe and effective clinical benefit for those who suffer from this distressing symptom. The purpose of this paper is to assess the current options for the management of hot flashes, examining key endpoints from recent clinical trials and reviewing future directions. Hot flashes are a common stressful symptom for individuals with cancer, particularly women with a history of breast cancer and men with prostate cancer. Lifestyle modifications are proposed as the first step in the management of less severe hot flashes. Several publications have addressed nonhormonal agents as a treatment option for hot flashes. Newer antidepressant and anticonvulsant agents have been studied and show potential in treating vasomotor symptoms. Although many complementary and alternative therapies, including herbal medications and phytoestrogens, have been studied for the treatment of hot flashes, none are clinically recommended at this time. Additionally, further evidence is needed for supportive exercise such as yoga and relaxation techniques. Acupuncture may warrant further investigation in the reduction and severity of hot flashes in both men and women. Hormonal therapies, including estrogens and progestogens, are the most well-known and efficient agents in alleviating hot flashes; however, the safety of these agents is disputable.

  14. Estimate Of Positive Ground Lightning Flashes In Ibadan, Nigeria ...

    African Journals Online (AJOL)

    Positive ground lightning flashes have been monitored for a period of one year in Ibadan, Nigeria. The instrument used was lightning flash counter designed to isolate only positive lightning discharges at average radiation field change of 5.0 v/m and peak frequency response of 17.0kHz with 3dB attenuation and effective ...

  15. Investigations concerning the applicability of X-ray flash interference and laser technology to shock-induced solidification of organic liquids

    International Nuclear Information System (INIS)

    Krehl, Peter; Schaaffs, Werner

    By a dielectric discharge through a thin layer of liquid a hot plasma is created, which expands very fast and builds up around a compression ring of very highly compressed matter. X-ray flash interferences and laser light are applied to investigate the structure of the compression rings. To perform investigation of the fine structure, an X-ray flash machine was developed which permits to obtain with a single flash in less than 1μs Laue patterns of monocrystals, and Debye-Scherrer patterns of polycrystalline substances. The investigation of the compression rings in diverse substances by laser light resulted that the optical transparency and solidification is different in different regions of the compression ring. Therefore important hints for experiments with X-ray flash interferences were obtained

  16. Corrosion testing in flash tanks of kraft pulp mills

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, S.J.; Stead, N.J.

    1999-11-01

    The corrosion observed in the first flash tanks in kraft pulp mills with modified cooking practices was characterized. Coupons of carbon steel (CS), several stainless steels (SS), and Ti were exposed at two mills. At one mill, identical sets of coupons were exposed in the No. 1 and No. 2 flash tank. At the other mill, three identical sets of coupons were placed in flash tank No. 1. The results of the exposures showed that both CS and Ti suffered high rates of general corrosion, while the SS suffered varying degrees of localized attack. The ranking of the corrosion resistance in the flash tank was the same that would be expected in a reducing acid environment. Attack by organic acids was concluded to be the most likely cause of corrosion of the flash tanks.

  17. Effectiveness of a new non-hydrogen peroxide bleaching agent after single use - a double-blind placebo-controlled short-term study

    Directory of Open Access Journals (Sweden)

    Mozhgan Bizhang

    Full Text Available Abstract Tooth whitening represents perhaps the most common aesthetic procedure in dentistry worldwide. The efficacy of bleaching depends on three aspects: bleaching agent, bleaching method, and tooth color. Objective: This in vivo study aimed to examine whitening effects on frontal teeth of the upper and lower jaws using an over-the-counter (OTC non-hydrogen peroxide bleaching agent in comparison to a placebo after one single use. Material and methods: Forty subjects (25 female; 15 male participated in this double-blind randomized placebo-controlled trial. The subjects were randomly allocated to two groups (n=20. The test group received the OTC product (iWhite Instant and the placebo group received an identically composed product except for the active agents. Each subject was treated with a prefilled tray containing iWhite Instant or the placebo for 20 minutes. The tooth shade of the front teeth (upper and lower jaws was assessed before (E_0, immediately after (E_1 and 24 h after treatment (E_2, using a shade guide (VITA classical. Statistical testing was accomplished using the Mann-Whitney U test (p<0.001. The dropout rate was 0%. Results: There were no significant differences at E_0 between placebo and test groups regarding the tooth color. Differences in tooth color changes immediately after (ΔE1_0 and 24 h after treatment (ΔE2_0 were calculated for both groups. The mean values (standard deviations of tooth color changes for ΔE1_0 were 2.26 (0.92 in the test group and 0.01 (0.21 in the placebo group. The color changes for ΔE2_0 showed mean values of 2.15 (1.10 in the test group and 0.07 (0.35 in the placebo group. For ΔE1_0 and ΔE2_0 significant differences were found between the groups. Conclusion: In this short-term study, the results showed that a non-hydrogen peroxide bleaching agent has significant whitening effects immediately and 24 h after a single-use treatment.

  18. The chlorophyll a fluorescence induction pattern in chloroplasts upon repetitive single turnover excitations: Accumulation and function of QB-nonreducing centers

    NARCIS (Netherlands)

    Vredenberg, W.J.; Kasalicky, V.; Durchan, M.; Prasil, O.

    2006-01-01

    The increase of chlorophyll fluorescence yield in chloroplasts in a 12.5 Hz train of saturating single turnover flashes and the kinetics of fluorescence yield decay after the last flash have been analyzed. The approximate twofold increase in Fm relative to Fo, reached after 30-40 flashes, is

  19. Single thrombopoietin dose alleviates hematopoietic stem cells intrinsic short- and long-term ionizing radiation damage. In vivo identification of anatomical cell expansion sites.

    Science.gov (United States)

    Tronik-Le Roux, Diana; Nicola, Marie-Anne; Vaigot, Pierre; Nurden, Paquita

    2015-01-01

    Hematopoietic stem cells (HSC) are essential for maintaining the integrity of complex and long-lived organisms. HSC, which are self-renewing, reconstitute the hematopoietic system through out life and facilitate long-term repopulation of myeloablated recipients. We have previously demonstrated that when mice are exposed to sublethal doses of ionizing radiation, subsets of the stem/progenitor compartment are affected. In this study we examine the role of thrombopoietin (TPO) on the regenerative capacities of HSC after irradiation and report the first demonstration of efficacy of a single injection of TPO shortly after in vivo exposure to ionizing radiation for reducing HSC injury and improving their functional outcome. Our results demonstrate that TPO treatment not only reduced the number of apoptotic cells but also induced a significant modification of their intrinsic characteristics. These findings were supported by transplantation assays with long-term HSC that were irradiated or unirradiated, TPO treated or untreated, in CD45.1/CD45.2 systems and by using luciferase-labeled HSC for direct bioluminescence imaging in living animals. Of particular importance, our data demonstrate the skull to be a highly favorable site for the TPO-induced emergence of hematopoietic cells after irradiation, suggesting a TPO-mediated relationship of primitive hematopoietic cells to an anatomical component. Together, the data presented here: provide novel findings about aspects of TPO action on stem cells, open new areas of investigation for therapeutic options in patients who are treated with radiation therapy, and show that early administration of a clinically suitable TPO-agonist counteracts the previously observed adverse effects.

  20. The October 2014 United States Treasury bond flash crash and the contributory effect of mini flash crashes.

    Directory of Open Access Journals (Sweden)

    Zachary S Levine

    Full Text Available We investigate the causal uncertainty surrounding the flash crash in the U.S. Treasury bond market on October 15, 2014, and the unresolved concern that no clear link has been identified between the start of the flash crash at 9:33 and the opening of the U.S. equity market at 9:30. We consider the contributory effect of mini flash crashes in equity markets, and find that the number of equity mini flash crashes in the three-minute window between market open and the Treasury Flash Crash was 2.6 times larger than the number experienced in any other three-minute window in the prior ten weekdays. We argue that (a this statistically significant finding suggests that mini flash crashes in equity markets both predicted and contributed to the October 2014 U.S. Treasury Bond Flash Crash, and (b mini-flash crashes are important phenomena with negative externalities that deserve much greater scholarly attention.

  1. The October 2014 United States Treasury bond flash crash and the contributory effect of mini flash crashes.

    Science.gov (United States)

    Levine, Zachary S; Hale, Scott A; Floridi, Luciano

    2017-01-01

    We investigate the causal uncertainty surrounding the flash crash in the U.S. Treasury bond market on October 15, 2014, and the unresolved concern that no clear link has been identified between the start of the flash crash at 9:33 and the opening of the U.S. equity market at 9:30. We consider the contributory effect of mini flash crashes in equity markets, and find that the number of equity mini flash crashes in the three-minute window between market open and the Treasury Flash Crash was 2.6 times larger than the number experienced in any other three-minute window in the prior ten weekdays. We argue that (a) this statistically significant finding suggests that mini flash crashes in equity markets both predicted and contributed to the October 2014 U.S. Treasury Bond Flash Crash, and (b) mini-flash crashes are important phenomena with negative externalities that deserve much greater scholarly attention.

  2. Representative rainfall thresholds for flash floods in the Cali river watershed, Colombia

    Science.gov (United States)

    Ávila, A. D.; Carvajal, Y. E.; Justino, F.

    2015-06-01

    In the 21st century, societies face a significant increase in the number of extreme hydrometeorological events associated with climate variability (CV) and/or climate change (CC). Research has recently focused on establishing adaptation and mitigation measures to counteract the effects of CV and CC, especially those associated with precipitation, such as flash floods and flooding. In this study, 27 floods, listed in the historical database of natural disasters (DesInventar), occurring between 1980 and 2012, were analyzed. Using the daily hydrometeorological data, representative rainfall thresholds were defined to predict flash floods in the hydrographic basin of the Cali River, Colombia. Antecedent rainfall (AR), or short-term rain (1, 3, 5 and 7 days), and accumulated antecedent rainfall (AAR), or long-term rain (5, 7, 10, 15, 20, 25, 30, 60 and 90 days), levels were defined. The analysis showed that the greatest determinant for the occurrence of floods is AAR, with thresholds greater than 73, 95, 124, 170, 218 and 273 mm, for 5, 7, 10, 15, 20 and 25 days, respectively. Additionally, the data showed that, historically, the greatest number of flash floods (81.7 %) occurred in the Cali River basin in the months of April, May, and June.

  3. Simplified production of multimedia based radiological learning objects using the flash format

    International Nuclear Information System (INIS)

    Jedrusik, P.; Preisack, M.; Dammann, F.

    2005-01-01

    Purpose: evaluation of the applicability of the flash format for the production of radiological learning objects used in an e-learning environment. Material and methods: five exemplary learning objects with different didactic purposes referring to radiological diagnostics are presented. They have been intended for the use within the multimedia, internet-based e-learning environment LaMedica. Interactive learning objects were composed using the Flash 5.0 software (Macromedia, San Francisco, USA) on the basis of digital CT and MR images, digitized conventional radiographs and different graphical elements prepared as TIFF files or in a vector graphics format. Results: after a short phase of initial skill adaptation training, a radiologist author was soon able to create independently all learning objects. The import of different types of images and graphical elements was carried out without complications. Despite manifold design options, handling of the program is easy due to clear arrangement and structure, thus enabling the creation of simple as well as complex learning objects that provided a high degree of attractiveness and interaction. Data volume and bandwidth demand for online use was significantly reduced by the flash format compression without a substantial loss of visual quality. (orig.)

  4. Towards simulating a collisionless shock wave using the FLASH code

    International Nuclear Information System (INIS)

    Farley, D.R.; Shigemori K; Azechi, H.

    2005-01-01

    Full text: In recent years, there has been considerable interest in conducting laser-plasma experiments of relevance to astrophysical research. Results from these experiments can be used to study fundamental physics, as well as benchmark astrophysical codes. The FLASH code, a robust hydrodynamics code produced by the University of Chicago under the Accelerated Strategic Computing Initiative (ASCI), is Bed to simulate a blast wave experiment conducted at the University of Osaka Institute for Laser Engineering (ILE). The code was run in one and two dimensions (axis-symmetric) using a perfect gas equation of state approximation. The shock wave experiment involved irradiating a 2 micron thick piece of plastic (CH) with a high-power, short-pulse laser. The ablated material and resulting shock front from the plastic target Propagated a blast wave into ambient argon at 1.0 Torr. Evolution of the blast wave differs slightly between the cases of Spitzer-Harm conductivity on and off, and neither case matches well with experiments. Due to the high temperatures involved, a thermal wave should be expected such that the Spitzer-Harm conductivity on vase is more likely. Density an velocity profiles from experiment and numerical simulation are compared. The experiment and simulation results compare well blast wave theory

  5. Estimation of the Relative Severity of Floods in Small Ungauged Catchments for Preliminary Observations on Flash Flood Preparedness: A Case Study in Korea

    Science.gov (United States)

    Kim, Eung Seok; Choi, Hyun Il

    2012-01-01

    An increase in the occurrence of sudden local flooding of great volume and short duration has caused significant danger and loss of life and property in Korea as well as many other parts of the World. Since such floods usually accompanied by rapid runoff and debris flow rise quite quickly with little or no advance warning to prevent flood damage, this study presents a new flash flood indexing methodology to promptly provide preliminary observations regarding emergency preparedness and response to flash flood disasters in small ungauged catchments. Flood runoff hydrographs are generated from a rainfall-runoff model for the annual maximum rainfall series of long-term observed data in the two selected small ungauged catchments. The relative flood severity factors quantifying characteristics of flood runoff hydrographs are standardized by the highest recorded maximum value, and then averaged to obtain the flash flood index only for flash flood events in each study catchment. It is expected that the regression equations between the proposed flash flood index and rainfall characteristics can provide the basis database of the preliminary information for forecasting the local flood severity in order to facilitate flash flood preparedness in small ungauged catchments. PMID:22690208

  6. Article coated with flash bonded superhydrophobic particles

    Science.gov (United States)

    Simpson, John T [Clinton, TN; Blue, Craig A [Knoxville, TN; Kiggans, Jr., James O [Oak Ridge, TN

    2010-07-13

    A method of making article having a superhydrophobic surface includes: providing a solid body defining at least one surface; applying to the surface a plurality of diatomaceous earth particles and/or particles characterized by particle sizes ranging from at least 100 nm to about 10 .mu.m, the particles being further characterized by a plurality of nanopores, wherein at least some of the nanopores provide flow through porosity, the particles being further characterized by a plurality of spaced apart nanostructured features that include a contiguous, protrusive material; flash bonding the particles to the surface so that the particles are adherently bonded to the surface; and applying a hydrophobic coating layer to the surface and the particles so that the hydrophobic coating layer conforms to the nanostructured features.

  7. Optical demonstration on Honeywell FLASH program

    Science.gov (United States)

    O'Rourke, Ken; Peterson, Eric

    1996-10-01

    Flight control system architects are increasingly integrating aircraft control and management functionality. This functional integration increases performance and cost of ownership requirements on the communication pathways. Optical signal transmission is an attractive approach to satisfying these system requirements. Investigations and demonstrations of optic signaling are needed to validate applicability of fiber based communication systems to the new system architecture performance and cost requirements. Honeywell's activities associated with the Fly-By-Light Advanced System Hardware (FLASH) program have produced a system including key optical interface elements and accomplished preliminary demonstrations needed to validate flexible, optical based aircraft control and avionic systems. The Honeywell Primary Flight Control System included Active Hand Controllers, Primary Flight Control Computers and smart actuation subsystem elements interfaced through various optical implementations and communication protocols. These successful implementations and demonstrations provide an excellent baseline for the processes, tools and materials required to make Fly-by-Light avionic systems marketable.

  8. Flash photolysis-shock tube studies

    Energy Technology Data Exchange (ETDEWEB)

    Michael, J.V. [Argonne National Laboratory, IL (United States)

    1993-12-01

    Even though this project in the past has concentrated on the measurement of thermal bimolecular reactions of atomic species with stable molecules by the flash or laser photolysis-shock tube (FP- or LP-ST) method using atomic resonance absorption spectrometry (ARAS) as the diagnostic technique, during the past year the authors have concentrated on studies of the thermal decompositions of selected chlorocarbon molecules. These studies are necessary if the degradation of chlorine containing organic molecules by incineration are to be understood at the molecular level. Clearly, destruction of these molecules will not only involve abstraction reactions, when possible, but also thermal decomposition followed by secondary reactions of the initially formed atoms and radicals. Studies on the thermal decomposition of CH{sub 3}Cl are complete, and the curve-of-growth for Cl-atom atomic resonance absorption has been determined. The new thermal decomposition studies are similar to those already reported for CH{sub 3}Cl.

  9. Investigation of lightning flash morphologies along the entire supercell life cycle using a numerical 3D cloud resolving model(CRM).

    Science.gov (United States)

    Molinié, G.; Escobar, J.; Gazin, D.

    2008-12-01

    A stochastic lightning flash scheme has been implemented in line in a meso-sca le CRM. It is fully parallelized and vectorized. In this model, a lightning flash is schematized as two single conducting channels (single tracks) propagating in opposite directions from the lightning ignition point. Branch patterns propagate from the single channels. On the base of scale similarities between discharges in dielectrics at centimeter scales and lightning flashes, the stochastic scheme has been designed to compute branch trajec tories. Physical considerations and branch fractal dimensions compel branch trajectories. The charge neutralization operates along the single tracks and branches to threshold the cloud electrical charge. First, an assessment of the scheme will be presented in simple 2D configurations. Second, we will describe comprehensive 3D-thundercloud life-cycle simulations including cloud electrification and lightning discharges. Lightning flash patterns are analyzed through statistics of their effective fractal dimension. It is shown that paradoxically, lightning flashes with quasi-plane branch propagation (fractal dimension close to 2) lead to more steady electrical behavior than those completely filling volumes (fractal dimension close to 3).

  10. A new French flash flood warning service

    Directory of Open Access Journals (Sweden)

    de Saint-Aubin Céline

    2016-01-01

    Full Text Available The French State services in charge of flood forecasting supervise about 22,000 km among the 120,000 km of the French rivers within a warning procedure called Vigilance Crues (http://www.vigicrues.gouv.fr. Some recent dramatic flood events on small watershed not covered by Vigilance Crues highlight the need for a new warning procedure to anticipate violent flash floods that regularly affect rapid river-basins. Thus the concept emerged of an automatic warning service specifically dedicated to local crisis managers. This service will be less elaborated than Vigilance Crues, probably with false alarms and missed events sometimes, but it will deliver a first information. The generation of the warning is based on a simple rainfall-runoff hydrological model developed by Irstea on all French rivers, fed with radar-gauge rainfall grids provided by Meteo-France. Every fifteen minutes, the hydrological model estimates the discharges on the rivers eligible to the service and determine if certain thresholds corresponding to a high or very high flood are likely to be exceeded. The last step of the real-time system is to determine which municipalities are concerned with flood risk and send them an automatic warning by voice call, optionally by sms or email. A specific web interface is available for users to monitor the evolution of the flood risk on maps that are updated every 15 minutes. This new flash flood warning service will be operational early 2017 as a free service for about 8,000 French municipalities.

  11. Freeware eLearning Flash-ECG for learning electrocardiography.

    Science.gov (United States)

    Romanov, Kalle; Kuusi, Timo

    2009-06-01

    Electrocardiographic (ECG) analysis can be taught in eLearning programmes with suitable software that permits the effective use of basic tools such as a ruler and a magnifier, required for measurements. The Flash-ECG (Research & Development Unit for Medical Education, University of Helsinki, Finland) was developed to enable teachers and students to use scanned and archived ECGs on computer screens and classroom projectors. The software requires only a standard web browser with a Flash plug-in and can be integrated with learning environments (Blackboard/WebCT, Moodle). The Flash-ECG is freeware and is available to medical teachers worldwide.

  12. Symptom clusters among MsFLASH clinical trial participants.

    Science.gov (United States)

    Woods, Nancy Fugate; Hohensee, Chancellor; Carpenter, Janet S; Cohen, Lee; Ensrud, Kristine; Freeman, Ellen W; Guthrie, Katherine A; Joffe, Hadine; LaCroix, Andrea Z; Otte, Julie L

    2016-02-01

    Our objective was to identify symptom clusters using standardized measures completed by participants in the Menopausal Strategies: Finding Lasting Answers to Symptoms and Health clinical trial at baseline, including hot flash interference, and sleep, depressive, anxiety, and pain symptoms. Data from all women randomized to interventions and controls from Menopausal Strategies: Finding Lasting Answers to Symptoms and Health studies 1, 2, and 3 (N = 899) were included; 797 with complete data were used in the analyses. Scores from standardized measures obtained at baseline included the following: Hot Flash-Related Daily Interference Scale, Insomnia Severity Index, Pittsburgh Sleep Quality Index, Patient Health Questionnaire-9 measure of depressed mood, Generalized Anxiety Disorder, and Brief Pain Inventory PEG scores (pain intensity [P], interference with enjoyment of life [E], and interference with daily activity [G]). Latent class analysis was used to identify symptom clusters using standardized scale scores and their established cut points. We identified five classes using the Bayesian Information Criterion and the Akaike Information Criterion. Women in classes 1 and 2 had high hot flash interference levels relative to the others, and class 1 (10.5% of total) included severe hot flash interference, severe sleep symptoms, and moderately severe pain symptoms (hot flash, sleep, pain). In class 2 (14.1%), severe hot flash interference was paired with the severe sleep symptoms, and moderate to severe depressed and anxious mood symptoms and pain (hot flash, sleep, mood, pain). In class 3 (39.6%), women reported moderately severe sleep symptoms with moderate hot flash interference, and low severity mood and pain symptoms (hot flash, sleep). Those in class 4 (7.0%) reported moderate hot flash interference with severe levels of anxiety and depressed mood symptoms, but low levels of other symptoms (hot flash, mood). Women in class 5 (28.7%) reported the lowest levels of all

  13. Gamma ray flashes add to mystery of upper atmosphere

    Science.gov (United States)

    Atmospheric electricity research has come a long way since Benjamin Franklin's kite-flying days. But what researchers have been learning lately about above-thunderstorm electricity has wrought a whole new era of mysteries.For a start, last summer a Colorado meteorologist sparked interest in a terrestrial phenomenon that the community first observed more than 100 years ago: optical flashes that occur above thunderstorms—at least 30 km above Earth. Walter Lyons with the Ft. Collins-based Mission Research Corporation, demonstrated that such flashes are not anomalies, as conventional scientific wisdom had held. He filmed hundreds of flashes during a 2-week period.

  14. Signal filtering and parameter variance analysis from flash electroretinogram

    Directory of Open Access Journals (Sweden)

    Yan-Hong Fang

    2014-11-01

    Full Text Available AIM: To accurately measure the implicit time and amplitude of a-, b-wave from flash electroretinogram(ERGthrough filtering technology, eliminate oscillatory potentials interference. METHODS: Full-field ERGs were recorded in 30 eyes of 15 physical check-ups, measured the implicit time and amplitude of a-, b-wave, when the passband was set at 0.6~300Hz and 0.6~70Hz, and correlation was performed among those results by paired t-test.RESULTS: When the passband was set at 0.6~70Hz, a-, b-wave had a single peak, compared with the passband was set at 0.6~300Hz, the implicit time of a-, b-wave was prolonged, amplitude was decreased(PCONCLUSION: A passband of 0.6~70Hz was the best choice to obtain smooth a- and b-waves from the original ERG, It could accurately measure the implicit time and amplitude of a-, b-wave.

  15. Sensory characterization of commercial soluble coffees by Flash ProfileCaracterização sensorial de cafés solúveis comerciais por Perfil Flash

    Directory of Open Access Journals (Sweden)

    Marta de Toledo Benassi

    Full Text Available In today’s competitive market, there is a lack of simple methods for sensory characterization of products. The Flash Profile is a combination of the Free Choice Profiling terms selection with a ranking method, based on the simultaneous presentation of all samples to be evaluated, providing a quick description and discrimination of a set of products. Thus, this study aimed to apply the Flash profile method on the characterization of commercial soluble coffees. Four soluble coffees selected by presenting diversity in the production process and composition were evaluated by 32 assessors in a single session. The coffee brews were prepared with 28 g of soluble coffee per 1000 mL of purified water, and added of 9.5 % sucrose. Initially, the whole set of samples were presented simultaneously for the glossary development. In individual discussion, each assessor was assisted on the elaboration of individual score sheet with the definition of each attribute. Subsequently, the four coffee beverages were presented simultaneously to the assessor, who ordered the samples in ascending order for the intensity of each attribute on its score sheet. The results were analyzed by Generalized Procrustes Analysis. The most relevant attributes in the description and discrimination of sweetened coffee brews were brown color, aroma and flavor of coffee, bitter taste, sweet taste and the presence of oil on the brew surface. The Flash Profile method was efficient on the description and discrimination of a complex food matrix as soluble coffee, presenting consensus among the assessors, and a fast assessment.Dentro do competitivo mercado atual, há demanda por métodos mais simples na descrição de produtos. O Perfil Flash (Flash Profile é uma combinação do levantamento de atributos do Perfil Livre com um método de ordenação, baseado na apresentação simultânea de todas as amostras a serem avaliadas, proporcionando uma descrição e discriminação rápida de um

  16. Bunch arrival time monitors; Concepts towards improving the sensitivity for low charge operation for FLASH II and XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Penirschke, Andreas; Angelovski, Aleksandar; Jakoby, Rolf [TU Darmstadt, Institut fuer Mikrowellentechnik und Photonik, Merckstr. 25, 64283 Darmstadt (Germany); Sydlo, Cezary; Bousonville, Michael; Czwalinna, Marie Kristin; Schlarb, Holger [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Kuhl, Alexander [University of Hamburg, Physics Department, Accelerator Physics Group (Germany); Weiland, Thomas [Technische Univ. Darmstadt (Germany). Inst. fuer Theorie Elektromagnetischer Felder

    2013-07-01

    High gain Free-Electron Lasers can generate ultra short X-ray pulses in the femtosecond range. For a stable operation of the FEL, the precise knowledge of the bunch arrival time is crucial. A novel high bandwidth Bunch Arrival time Monitor was recently installed at FLASH to allow a low charge operation mode with a sub-10 fs resolution for bunch charges of 20 pC or more. The BAM is equipped with cone shaped pickups for the precise measurement of both, the high and low bunch charge operation mode. For the extension of FLASH facility to FLASH II new pickups for the high bandwidth BAMs need to be developed. The new BAM needs to maximize the voltage level of the beam induced signal for low charge operation mode in order to provide sufficient signal strength for the subsequent electronics. In this talk, we present concepts to improve the signal strength at the electro-optic modulators for low charge operation at FLASH II and XFEL.

  17. Evaluation of the efficacy and safety of Salvia officinalis in controlling hot flashes in prostate cancer patients treated with androgen deprivation.

    Science.gov (United States)

    Vandecasteele, Katrien; Ost, Piet; Oosterlinck, Willem; Fonteyne, Valérie; Neve, Wilfried De; Meerleer, Gert De

    2012-02-01

    The purpose of this pilot study was to evaluate the efficacy and safety of Salvia officinalis in controlling hot flashes in prostate cancer patients treated with androgen deprivation therapy (ADT). Ten patients experiencing hot flashes were included in a single-centre prospective pilot study. Treatment consisted of 150 mg of Salvia officinalis extract taken orally three times daily. A diary questionnaire scoring hot flashes, subjective side effects and quality of life (QOL) had to be completed. Clinical examination was performed at every visit and the concentration of ADT-linked hormones, haemoglobin and cholesterol was measured before, during and after ending treatment. Before the start of treatment, a 1 week baseline registration was performed. An analysis of variance with time of measurement as a within-subject factor was performed. When analysing the hot flashes score, one patient was excluded due to insufficient diary notes. The mean weekly score declined from 112 (SD = 71) at baseline to 59 (SD = 54) at the end of treatment (p = 0.002). Hot flashes diminished significantly from the first week up to and including week 3. This was maintained during treatment. There was no effect on QOL. There were no side effects. It is concluded that Salvia officinalis is efficient and safe in the treatment hot flashes, without improving QOL. Copyright © 2011 John Wiley & Sons, Ltd.

  18. Some design aspects of multistage flash distillation process

    International Nuclear Information System (INIS)

    Ahmad, Mohammad.

    1975-01-01

    The purpose of this paper is to examine the effect of the design variables of multistage flash (MSF) process on the performance and/or the cost of the desalting plant, and to establish certain design trends

  19. Robust Flash 3D-FPA Sensor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  20. Hot Flashes and Quality of Life among Breast Cancer Patients

    National Research Council Canada - National Science Library

    Jacobs, Linda A

    2005-01-01

    This ongoing longitudinal study examines hot flashes and Quality of Life (QoL) in breast cancer (BC) patients undergoing initial treatment, and develops a taxonomy of the medical and Complementary and Alternative Medicine...

  1. Impact of rainfall spatial variability on Flash Flood Forecasting

    Science.gov (United States)

    Douinot, Audrey; Roux, Hélène; Garambois, Pierre-André; Larnier, Kevin

    2014-05-01

    According to the United States National Hazard Statistics database, flooding and flash flooding have caused the largest number of deaths of any weather-related phenomenon over the last 30 years (Flash Flood Guidance Improvement Team, 2003). Like the storms that cause them, flash floods are very variable and non-linear phenomena in time and space, with the result that understanding and anticipating flash flood genesis is far from straightforward. In the U.S., the Flash Flood Guidance (FFG) estimates the average number of inches of rainfall for given durations required to produce flash flooding in the indicated county. In Europe, flash flood often occurred on small catchments (approximately 100 km2) and it has been shown that the spatial variability of rainfall has a great impact on the catchment response (Le Lay and Saulnier, 2007). Therefore, in this study, based on the Flash flood Guidance method, rainfall spatial variability information is introduced in the threshold estimation. As for FFG, the threshold is the number of millimeters of rainfall required to produce a discharge higher than the discharge corresponding to the first level (yellow) warning of the French flood warning service (SCHAPI: Service Central d'Hydrométéorologie et d'Appui à la Prévision des Inondations). The indexes δ1 and δ2 of Zoccatelli et al. (2010), based on the spatial moments of catchment rainfall, are used to characterize the rainfall spatial distribution. Rainfall spatial variability impacts on warning threshold and on hydrological processes are then studied. The spatially distributed hydrological model MARINE (Roux et al., 2011), dedicated to flash flood prediction is forced with synthetic rainfall patterns of different spatial distributions. This allows the determination of a warning threshold diagram: knowing the spatial distribution of the rainfall forecast and therefore the 2 indexes δ1 and δ2, the threshold value is read on the diagram. A warning threshold diagram is

  2. Flash Cracking Reactor for Waste Plastic Processing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design, model, build, and test a novel flash cracking reactor to convert plastic waste, and potentially other unconventional hydrocarbon feedstocks,...

  3. 3D Flash LIDAR EDL Resolution Improvement, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  4. 3D Flash LIDAR Space Laser, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  5. 3D Flash LIDAR real time embedded processing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  6. Dynamic simulation of flash drums using rigorous physical property calculations

    Directory of Open Access Journals (Sweden)

    F. M. Gonçalves

    2007-06-01

    Full Text Available The dynamics of flash drums is simulated using a formulation adequate for phase modeling with equations of state (EOS. The energy and mass balances are written as differential equations for the internal energy and the number of moles of each species. The algebraic equations of the model, solved at each time step, are those of a flash with specified internal energy, volume and mole numbers (UVN flash. A new aspect of our dynamic simulations is the use of direct iterations in phase volumes (instead of pressure for solving the algebraic equations. It was also found that an iterative procedure previously suggested in the literature for UVN flashes becomes unreliable close to phase boundaries and a new alternative is proposed. Another unusual aspect of this work is that the model expressions, including the physical properties and their analytical derivatives, were quickly implemented using computer algebra.

  7. Flash 3D Rendezvous and Docking Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash Ladar is a breakthrough technology for many emerging and existing 3D vision areas, and sensor improvements will have an impact on nearly all these fields....

  8. Abstract Specification of the UBIFS File System for Flash Memory

    Science.gov (United States)

    Schierl, Andreas; Schellhorn, Gerhard; Haneberg, Dominik; Reif, Wolfgang

    Today we see an increasing demand for flash memory because it has certain advantages like resistance against kinetic shock. However, reliable data storage also requires a specialized file system knowing and handling the limitations of flash memory. This paper develops a formal, abstract model for the UBIFS flash file system, which has recently been included in the Linux kernel. We develop formal specifications for the core components of the file system: the inode-based file store, the flash index, its cached copy in the RAM and the journal to save the differences. Based on these data structures we give an abstract specification of the interface operations of UBIFS and prove some of the most important properties using the interactive verification system KIV.

  9. Flash 3D Rendezvous and Docking Sensor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash Ladar is a breakthrough technology for many emerging and existing 3D vision areas, and sensor improvements will have an impact on nearly all these fields....

  10. Wedge Heat-Flux Indicators for Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2003-01-01

    Wedge indicators have been proposed for measuring thermal radiation that impinges on specimens illuminated by flash lamps for thermographic inspection. Heat fluxes measured by use of these indicators would be used, along with known thermal, radiative, and geometric properties of the specimens, to estimate peak flash temperatures on the specimen surfaces. These indicators would be inexpensive alternatives to high-speed infrared pyrometers, which would otherwise be needed for measuring peak flash surface temperatures. The wedge is made from any suitable homogenous material such as plastic. The choice of material is governed by the equation given. One side of the wedge is covered by a temperature sensitive compound that decomposes irreversibly when its temperature exceeds a rated temperature (T-rated). The uncoated side would be positioned alongside or in place of the specimen and exposed to the flash, then the wedge thickness at the boundary between the white and blackened portions measured.

  11. Interim report on flash floods, Area 5 - Nevada Test Site

    International Nuclear Information System (INIS)

    French, R.H.

    1980-09-01

    Examination of the presently available data indicates that consideration must be given to the possibility of flash floods when siting waste management facilities in Area 5 of the Nevada Test Site. 6 figures, 7 tables

  12. The Essential Guide to 3D in Flash

    CERN Document Server

    Olsson, Ronald A

    2010-01-01

    If you are an ActionScript developer or designer and you would like to work with 3D in Flash, this book is for you. You will learn the core Flash 3D concepts, using the open source Away3D engine as a primary tool. Once you have mastered these skills, you will be able to realize the possibilities that the available Flash 3D engines, languages, and technologies have to offer you with Flash and 3D.* Describes 3D concepts in theory and their implementation using Away3D* Dives right in to show readers how to quickly create an interactive, animated 3D scene, and builds on that experience throughout

  13. Portable flash X-ray systems: applications and techniques

    International Nuclear Information System (INIS)

    Bryant, L.E.

    1976-01-01

    Three portable flash x-ray equipments are described, and applications such as jet and high explosive studies, bullet impact and lead casting experiments are given as well as techniques for triggering and protection of equipment and film

  14. The Relationship between Hot Flashes and Testosterone Recovery after 12 Months of Androgen Suppression for Men with Localised Prostate Cancer in the ASCENDE-RT Trial.

    Science.gov (United States)

    Dosani, M; Morris, W J; Tyldesley, S; Pickles, T

    2017-10-01

    This study describes the proportion of men who experienced hot flashes (flashes), and the testosterone level at onset, peak frequency and cessation of flashes after 12 months of androgen deprivation therapy (ADT) in men undergoing curative-intent external beam radiation therapy (± brachytherapy boost). We also aimed to characterise testosterone recovery in this population. This was a pre-specified secondary analysis of the ASCENDE-RT clinical trial. Three hundred and ninety-eight men were randomised. All received 12 months of ADT. The presence and frequency of flashes were patient reported. Cessation of flashes was defined as the first date a patient reported resolution of this symptom. Testosterone recovery was defined as any single serum testosterone above the threshold of 5, 7.5 or 10 nmol/l. The median age and follow-up were 68 years and 6.1 years. Flashes were reported in 93% of men. Flashes began and reached peak frequency at a median time of 4.0 months from the first luteinizing hormone-releasing hormone injection when testosterone levels had fallen to castrate. The median time to cessation of flashes was 7.6 months after the cessation of ADT (last injection + 3 months), when the median testosterone had risen to 5.7 nmol/l. A resolution of flashes was reported in 99% of patients. Baseline testosterone was available in 338 patients (85%). The median baseline testosterone was 13.2 nmol/l. The median (95% confidence interval) time of testosterone recovery to thresholds of 5 nmol/l, 7.5 nmol/l and 10 nmol/l were 9 (9-10) months, 13 (10-15) months and 18 (17-19) months from the cessation of ADT. At the time of censor, 96, 94 and 91% of patients had recovered testosterone to thresholds of 5, 7.5 and 10 nmol/l. Flashes occur at castrate levels of testosterone, with cessation of hot flashes antedating full recovery of testosterone in most patients. Rates of testosterone recovery after 12 months of ADT exceed 90%, although it can be delayed. Copyright © 2017 The

  15. Tutorial Pengenalan Adobe Photoshop Menggunakan Adobe Flash CS3

    OpenAIRE

    Mayoka, Rio

    2011-01-01

    Kajian ini bertujuan untuk membangun sebuah aplikasi yang dapat menjadi alat bantu dalam pembelajaran Adobe Photoshop, dimana terdapat beberapa materi pengenalan dasar Adobe Photoshop. Aplikasi ini suatu gagasan dengan membuat tutorial beranimasi yang interatif. Aplikasi ini dibuat dengan menggunakan Adobe Flash CS3 dan dapat dijalankan dengan Flash player. Aplikasi ini dapat membantu para penggunanya dalam memahami pengenalan Adobe Photoshop, terutama pengenalan tool pada Adob...

  16. Theoretical Characterizaiton of Visual Signatures (Muzzle Flash)

    Science.gov (United States)

    Kashinski, D. O.; Scales, A. N.; Vanderley, D. L.; Chase, G. M.; di Nallo, O. E.; Byrd, E. F. C.

    2014-05-01

    We are investigating the accuracy of theoretical models used to predict the visible, ultraviolet and infrared spectra of product materials ejected from the muzzle of currently fielded systems. Recent advances in solid propellants has made the management of muzzle signature (flash) a principle issue in weapons development across the calibers. A priori prediction of the electromagnetic spectra of formulations will allow researchers to tailor blends that yield desired signatures and determine spectrographic detection ranges. We are currently employing quantum chemistry methods at various levels of sophistication to optimize molecular geometries, compute vibrational frequencies, and determine the optical spectra of specific gas-phase molecules and radicals of interest. Electronic excitations are being computed using Time Dependent Density Functional Theory (TD-DFT). A comparison of computational results to experimental values found in the literature is used to assess the affect of basis set and functional choice on calculation accuracy. The current status of this work will be presented at the conference. Work supported by the ARL, and USMA.

  17. Flash Nanoprecipitation: Particle Structure and Stability

    Science.gov (United States)

    Pustulka, Kevin M.; Wohl, Adam R.; Lee, Han Seung; Michel, Andrew R.; Han, Jing; Hoye, Thomas R.; McCormick, Alon V.; Panyam, Jayanth; Macosko, Christopher W.

    2013-01-01

    Flash nanoprecipitation (FNP) is a process that, through rapid mixing, stabilizes an insoluble low molecular weight compound in a nano-sized, polymer-stabilized delivery vehicle. The polymeric components are typically amphiphilic diblock copolymers (BCPs). In order to fully exploit the potential of FNP, factors affecting particle structure, size, and stability must be understood. Here we show that polymer type, hydrophobicity and crystallinity of the small molecule, and small molecule loading levels all affect particle size and stability. Of the four block copolymers (BCP) that we have studied here, poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) (PEG-b-PLGA) was most suitable for potential drug delivery applications due to its ability to give rise to stable nanoparticles, its biocompatibility, and its degradability. We found little difference in particle size when using PLGA block sizes over the range of 5 to 15kDa. The choice of hydrophobic small molecule was important, as molecules with a calculated water-octanol partition coefficient (clogP) below 6 gave rise to particles that were unstable and underwent rapid Ostwald ripening. Studies probing the internal structure of nanoparticles were also performed. Analysis of differential scanning calorimetry (DSC), cryogenic transmission electron microscopy (cryo-TEM), and 1H-NMR experiments support a three-layer core-shell-corona nanoparticle structure. PMID:24053447

  18. Mass flow determination in flashing openings

    Directory of Open Access Journals (Sweden)

    G Polanco

    2016-04-01

    Full Text Available The output flow characteristics in most of the industrial accidental releasesare related to a two-phase flow and their represent a potential hazard tofacilities, personnel, equipments and environment. If these releases involvesuperheated liquid then a flashing process can take place, where a liquidgasmixture due to the breaking of the metastable state can significantlyaffect the hazard zone. The calculation of the conditions for the flow after aflashing opening is very relevant in order to understand the mechanismspresent after the release opening. Numerical modelling represents animportant tool to approach these types of phenomena. However,the accuracy of the obtained results will depend on the realistic values ofthe flow parameters taken as input information to perform the CFD work.The model proposed here is based on the assumption of the existence ofa non reversible work in the system and the use of the thermodynamicjump formulation to model the phase change process in order to predictphase velocity and mass flow. The obtained results have a goodagreement with the experimental data available.

  19. Flash pyrolysis fuel oil: bio-pok

    Energy Technology Data Exchange (ETDEWEB)

    Gust, S. [Neste Oy, Porvoo (Finland)

    1997-12-01

    Samples of flash pyrolysis liquid produced by Union Fenosa, Spain from pine and straw and samples produced by Ensyn of Canada from mixed hardwoods were combusted with simple pressure atomization equipment commonly used with light fuel oils in intermediate size (0.1-1 MW) boilers. With a number of modifications to the combustion system, carbon monoxide (CO) and nitrous oxide (NO{sub x}) could be reduced to acceptable levels: CO < 30 ppm and NO{sub x} < 140 ppm. Particulate emissions which were initially very high (Bacharach 4-5) were reduced (Bach. 2-3) by system improvements but are still higher than from light fuel oil (Bach. <1). The modifications to the combustion system were: refractory section between burner and boiler, acid resistant progressive cavity pump, higher liquid preheat temperature and higher pressure than for light fuel oils. The main problems with pyrolysis liquids concerns their instability or reactivity. At temperatures above 100 deg C they begin to coke, their viscosity increases during storage and oxygen from air causes skin formation. This requires that special handling procedures are developed for fuel storage, delivery and combustion systems. (orig.)

  20. Flash Vacuum Pyrolysis: Techniques and Reactions.

    Science.gov (United States)

    Wentrup, Curt

    2017-11-20

    Flash vacuum pyrolysis (FVP) had its beginnings in the 1940s and 1950s, mainly through mass spectrometric detection of pyrolytically formed free radicals. In the 1960s many organic chemists started performing FVP experiments with the purpose of isolating new and interesting compounds and understanding pyrolysis processes. Meanwhile, many different types of apparatus and techniques have been developed, and it is the purpose of this review to present the most important methods as well as a survey of typical reactions and observations that can be achieved with the various techniques. This includes preparative FVP, chemical trapping reactions, matrix isolation, and low temperature spectroscopy of reactive intermediates and unstable molecules, the use of online mass, photoelectron, microwave, and millimeterwave spectroscopies, gas-phase laser pyrolysis, pulsed pyrolysis with supersonic jet expansion, very low pressure pyrolysis for kinetic investigations, solution-spray and falling-solid FVP for involatile compounds, and pyrolysis over solid supports and reagents. Moreover, the combination of FVP with matrix isolation and photochemistry is a powerful tool for investigations of reaction mechanism. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Production of bio-oil with flash pyrolysis; Biooeljyn tuotanto flash-pyrolyysillae ja sen poltto

    Energy Technology Data Exchange (ETDEWEB)

    Nyroenen, T. [Vapo Oy, Jyvaeskylae (Finland)

    1997-12-01

    The target of the R and D work is to study the production of bio-oils using Flash-pyrolysis technology and utilisation of the bio-oil in oil-fuelled boilers. The PDU-unit was installed at VTT Energy in Otaniemi in April 1996. The first test were carried out in June. In the whole project Vapo Oy is responsible for: acquiring the 20 kg/h PDU-device for development; follow up of the engine tests; the investment of 5 MW demonstration plant; to carry on the boiler and engine tests with Finnish bio-oils. (orig.)

  2. Some Improvements in Utilization of Flash Memory Devices

    Science.gov (United States)

    Gender, Thomas K.; Chow, James; Ott, William E.

    2009-01-01

    Two developments improve the utilization of flash memory devices in the face of the following limitations: (1) a flash write element (page) differs in size from a flash erase element (block), (2) a block must be erased before its is rewritten, (3) lifetime of a flash memory is typically limited to about 1,000,000 erases, (4) as many as 2 percent of the blocks of a given device may fail before the expected end of its life, and (5) to ensure reliability of reading and writing, power must not be interrupted during minimum specified reading and writing times. The first development comprises interrelated software components that regulate reading, writing, and erasure operations to minimize migration of data and unevenness in wear; perform erasures during idle times; quickly make erased blocks available for writing; detect and report failed blocks; maintain the overall state of a flash memory to satisfy real-time performance requirements; and detect and initialize a new flash memory device. The second development is a combination of hardware and software that senses the failure of a main power supply and draws power from a capacitive storage circuit designed to hold enough energy to sustain operation until reading or writing is completed.

  3. Normalized Temperature Contrast Processing in Infrared Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2016-01-01

    The paper presents further development in normalized contrast processing used in flash infrared thermography method. Method of computing normalized image or pixel intensity contrast, and normalized temperature contrast are provided. Methods of converting image contrast to temperature contrast and vice versa are provided. Normalized contrast processing in flash thermography is useful in quantitative analysis of flash thermography data including flaw characterization and comparison of experimental results with simulation. Computation of normalized temperature contrast involves use of flash thermography data acquisition set-up with high reflectivity foil and high emissivity tape such that the foil, tape and test object are imaged simultaneously. Methods of assessing other quantitative parameters such as emissivity of object, afterglow heat flux, reflection temperature change and surface temperature during flash thermography are also provided. Temperature imaging and normalized temperature contrast processing provide certain advantages over normalized image contrast processing by reducing effect of reflected energy in images and measurements, therefore providing better quantitative data. Examples of incorporating afterglow heat-flux and reflection temperature evolution in flash thermography simulation are also discussed.

  4. Genotoxicity of short single-wall and multi-wall carbon nanotubes in human bronchial epithelial and mesothelial cells in vitro

    International Nuclear Information System (INIS)

    Lindberg, Hanna K.; Falck, Ghita C.-M.; Singh, Rajinder; Suhonen, Satu; Järventaus, Hilkka; Vanhala, Esa; Catalán, Julia; Farmer, Peter B.; Savolainen, Kai M.; Norppa, Hannu

    2013-01-01

    Although some types of carbon nanotubes (CNTs) have been described to induce mesothelioma in rodents and genotoxic effects in various cell systems, there are few previous studies on the genotoxicity of CNTs in mesothelial cells. Here, we examined in vitro DNA damage induction by short multi-wall CNTs (MWCNTs; 10–30 nm × 1–2 μm) and single-wall CNTs (SWCNTs; >50% SWCNTs, ∼40% other CNTs; 1 dG) DNA adducts. In BEAS 2B cells, we also studied the induction of micronuclei (MN) by the CNTs using the cytokinesis-block method. The cells were exposed to the CNTs (5–200 μg/cm 2 , corresponding to 19–760 μg/ml) for 24 and 48 h in the comet assay and for 48 and 72 h in the MN and M 1 dG assays. Transmission electron microscopy (TEM) showed more MWCNT fibres and SWCNT clusters in BEAS 2B than MeT-5A cells, but no significant differences were seen in intracellular dose expressed as area of SWCNT clusters between TEM sections of the cell lines. In MeT-5A cells, both CNTs caused a dose-dependent induction of DNA damage (% DNA in comet tail) in the 48-h treatment and SWCNTs additionally in the 24-h treatment, with a statistically significant increase at 40 μg/cm 2 of SWCNTs and (after 48 h) 80 μg/cm 2 of both CNTs. SWCNTs also elevated the level of M 1 dG DNA adducts at 1, 5, 10 and 40 μg/cm 2 after the 48-h treatment, but both CNTs decreased M 1 dG adduct level at several doses after the 72-h treatment. In BEAS 2B cells, SWCNTs induced a statistically significant increase in DNA damage at 80 and 120 μg/cm 2 after the 24-h treatment and in M 1 dG adduct level at 5 μg/cm 2 after 48 h and 10 and 40 μg/cm 2 after 72 h; MWCNTs did not affect the level of DNA damage but produced a decrease in M 1 dG adducts in the 72-h treatment. The CNTs did not affect the level of MN. In conclusion, MWCNTs and SWCNTs induced DNA damage in MeT-5A cells but showed a lower (SWCNTs) or no (MWCNTs) effect in BEAS 2B cells, suggesting that MeT-5A cells were more sensitive to the DNA

  5. Objective hot flashes are negatively related to verbal memory performance in midlife women.

    Science.gov (United States)

    Maki, Pauline M; Drogos, Lauren L; Rubin, Leah H; Banuvar, Suzanne; Shulman, Lee P; Geller, Stacie E

    2008-01-01

    To test the hypothesis that hot flashes specifically relate to verbal memory performance by examining the relationship between objective hot flashes and cognitive test performance in women with moderate to severe vasomotor symptoms. In an observational study, 29 midlife women (mean age, 53 y) with moderate to severe hot flashes provided measures of objective hot flashes with an ambulatory hot flash monitor, subjective hot flashes with a diary and questionnaire, and objective measures of verbal memory and other cognitive functions with standardized neuropsychological tests. The mean number of objective hot flashes was 19.5 per day (range, 6 to 35), including 15.3 (range, 6 to 35) during waking hours and 4.2 (range, 0 to 9) during sleep. The mean sensitivity (ie, subjective detection of objectively measured hot flashes) was 60%. Regression analyses revealed that total number of objective hot flashes, sleep duration, and verbal knowledge were significant predictors of delayed verbal memory. Verbal fluency correlated positively with objective daytime hot flashes. Hot flashes did not predict performance on any of the other secondary cognitive measures (ie, attention, working memory, visual memory), although poor sleep predicted worse performance on several outcome measures. Highly symptomatic women underreport the number of objective hot flashes that they experience by 43%. Verbal memory performance relates significantly to the objective number of hot flashes women experience but not to the number of hot flashes that they report. These findings suggest that physiological factors related to hot flashes, rather than psychological factors, predict poorer verbal memory function.

  6. Transverse beam diagnostics for the XUV seeding experiment at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Boedewadt, Joern

    2011-12-15

    High-gain free-electron lasers (FEL) offer intense, transversely coherent, and ultra short radiation pulses in the extreme ultraviolet, the soft- and the hard-X-ray spectral range. Undulator radiation from spontaneous emission is amplified. Due to the stochastic emission process, the radiation exhibits a low temporal coherence, and the structure of the amplified radiation in the temporal and in the spectral domain shows large shot-to-shot fluctuations. In order to improve the temporal coherence, an external radiation pulse is used to induce (or seed) the FEL process. With this, only a defined wavelength range within the FEL bandwidth is amplified provided that the irradiance of the external radiation exceeds the noise level of the FEL amplifier. In addition to the improved longitudinal coherence, a seeded FEL provides the possibility to perform pump-probe experiments with an expected temporal resolution of the order of the pulse durations. In order to experimentally proof this statement, a test experiment for direct HHG-seeding at wavelength below 40 nm was installed at the free-electron laser facility FLASH at DESY. Crucial for the seeded operation of an FEL is the six-dimensional laser-electron overlap of the seed laser pulses with the electron bunches. Hence, dedicated diagnostics to measure and mechanisms to control the overlap are essential. Within this thesis, a transport beamline for the seed laser beam and the transverse diagnostics for seed laser- and the electron-beam were developed and commissioned. Results of the performance of the seed injection beamline are presented, and first measurements of the seeded operation of the FEL are analyzed and evaluated. (orig.)

  7. FPGA-based implementation of a cavity field controller for FLASH and X-FEL

    Science.gov (United States)

    Fafara, Przemyslaw; Jalmuzna, Wojciech; Koprek, Waldemar; Pozniak, Krzysztof; Romaniuk, Ryszard; Szewinski, Jaroslaw; Cichalewski, Wojciech

    2007-08-01

    The subject of this paper is the design and construction of a new generation of superconducting cavity accelerator measurement and control system. The old system is based on a single digital signal processor (DSP). The new system uses a large programmable array circuit (FPGA) instead, with a multi-gigabit optical link. Both systems now work in parallel in the Free Electron Laser in Hamburg (FLASH). The differences between the systems are shown, based on the measurement results of the working machine. The major advantage of the new system is a bigger area of stability of the machine control loop.

  8. Multiflash X ray with Image Detanglement for Single Image Isolation

    Science.gov (United States)

    2017-08-31

    conceived and developed to capture multiple flash X-rays on a single film or phosphor screen and digitally detangle the resulting image into separate images...capability was conceived and developed to capture multiple flash X-rays on a single film or phosphor screen and digitally detangle the resulting image...digital radiograph (ORAD); and 2) an appropriate averaging of the value of the pixels within the exposed region-of-interest on the ORAD needs to be

  9. Assessment of Marginal Peri-implant Bone-Level Short-Length Implants Compared with Standard Implants Supporting Single Crowns in a Controlled Clinical Trial: 12-Month Follow-up.

    Science.gov (United States)

    Mendoza-Azpur, Gerardo; Lau, Miguel; Valdivia, Erick; Rojas, Jorge; Muñoz, Henry; Nevins, Myron

    In oral rehabilitation, crown-to-root ratio is accepted as an indicator of bone loss, and this concept was transferred to implants. Recent studies have indicated that there is no significant difference between short and standard implants. The aim of this study was to compare marginal bone-level alteration through radiographic evaluation and clinical parameters between short and standard implants supporting single crowns. This prospective clinical trial study included 82 systemically healthy, nonsmoking subjects. Patients were divided into two groups: one group for short dental implants measuring 5.5 or 7 mm, and one group for standard dental implants measuring 10 or 12 mm, in accordance with the individual needs of the patient. A clinical dental history was taken for each subject, including model casts, dental radiography, and cone beam computed tomography. A periapical analysis was also performed using ImageJ computer software to establish the initial bone measurement and periapical bone loss. A statistically significant difference was found in favor of the standard-length implants after 12 months, with greater gingival recession around the implant; however, bone loss in the short implants did not exceed 0.53 mm. The treatment with 5.5- to 7-mm-length implants is as reliable as treatment with 10- or 12-mm implants. Peri-implant bone loss is minimal, and therefore use of short implants can be recommended as treatment for the restoration of partially edentulous patients without the need for splinted crowns.

  10. "Know What to Do If You Encounter a Flash Flood": Mental Models Analysis for Improving Flash Flood Risk Communication and Public Decision Making.

    Science.gov (United States)

    Lazrus, Heather; Morss, Rebecca E; Demuth, Julie L; Lazo, Jeffrey K; Bostrom, Ann

    2016-02-01

    Understanding how people view flash flood risks can help improve risk communication, ultimately improving outcomes. This article analyzes data from 26 mental models interviews about flash floods with members of the public in Boulder, Colorado, to understand their perspectives on flash flood risks and mitigation. The analysis includes a comparison between public and professional perspectives by referencing a companion mental models study of Boulder-area professionals. A mental models approach can help to diagnose what people already know about flash flood risks and responses, as well as any critical gaps in their knowledge that might be addressed through improved risk communication. A few public interviewees mentioned most of the key concepts discussed by professionals as important for flash flood warning decision making. However, most interviewees exhibited some incomplete understandings and misconceptions about aspects of flash flood development and exposure, effects, or mitigation that may lead to ineffective warning decisions when a flash flood threatens. These include important misunderstandings about the rapid evolution of flash floods, the speed of water in flash floods, the locations and times that pose the greatest flash flood risk in Boulder, the value of situational awareness and environmental cues, and the most appropriate responses when a flash flood threatens. The findings point to recommendations for ways to improve risk communication, over the long term and when an event threatens, to help people quickly recognize and understand threats, obtain needed information, and make informed decisions in complex, rapidly evolving extreme weather events such as flash floods. © 2015 Society for Risk Analysis.

  11. X-ray flash photography of spark discharges in layers of liquid

    Science.gov (United States)

    Germer, Rudolf K.

    2001-04-01

    When W. Schaaffs developed X-ray flash machines after World War II at Siemens in Germany, he used spark discharges in layers of liquid between solid plates as a nonmilitary test object. W. Schaaffs discovered the so-called compression ring in 1947 during his experiments with spark discharges. This paper discusses the construction of triode X-ray flash tubes, the evolution of the discharge into the vacuum of the tube and the tubes characteristics depending on this mechanism. It will be found, that the special geometry of the tube shows an important influence on the discharge. The electrons will need a long time to reach the anode while positive ions are strongly accelerated near the anode. The duration of the x-ray flash is limited by the size and speed of the evaporated material from the anode. In the second part of this paper the spark discharge in a layer of liquid between solid plates is described. With this spark discharge it is possible to produce a shock wave in the liquid which finally moves to a vortex. Faster waves propagate in the plates at both sides of the layer. The plate waves induce a low pressure region in front of the ring and there it is possible to detect cavitation bubbles. The spatial arrangement of these bubbles in the layer of liquid between the solid plates depends on the excitation strength of the pulse waves in the plates. Their amplitude depends on the distance to the spark. Thus in a single X-ray flash picture it is possible to study the distribution of the cavitation bubbles for different excitation power. The spatial arrangement of the bubbles can show a periodic structure or it might be chaotic. X-ray flash experiments of this phenomenon will be presented. A model for the birth of cavitation bubbles will be shown. It explains how seeds of phase changes can be distributed in space under special conditions. This idea might also be valid for controlling the crystal growth.

  12. Using an FSDS-R Item to Screen for Sexually Related Distress: A MsFLASH Analysis

    Directory of Open Access Journals (Sweden)

    Janet S. Carpenter, PhD, RN, FAAN

    2015-03-01

    Conclusions: A single FSDS-R item may be a useful screening tool to quickly identify midlife women with sexually related distress when it is not feasible to administer the entire scale, though further validation is warranted. Carpenter JS, Reed SD, Guthrie KA, Larson JC, Newton KM, Lau RJ, Learman LA, and Shifren JL. Using an FSDS-R item to screen for sexually related distress: A MsFLASH analysis. Sex Med 2015;3:7–13.

  13. A high repetition rate XUV seeding source for FLASH2

    International Nuclear Information System (INIS)

    Willner, Arik

    2012-05-01

    Improved performance of free-electron laser (FEL) light sources in terms of timing stability, pulse shape and spectral properties of the amplified FEL pulses is of interest in material science, the fields of ultrafast dynamics, biology, chemistry and even special branches in industry. A promising scheme for such an improvement is direct seeding with high harmonic generation (HHG) in a noble gas target. A free-electron laser seeded by an external extreme ultraviolet (XUV) source is planned for FLASH2 at DESY in Hamburg. The requirements for the XUV/soft X-ray source can be summarized as follows: A repetition rate of at least 100 kHz in a 10 Hz burst is needed at variable wavelengths from 10 to 40 nm and pulse energies of several nJ within a single laser harmonic. This application requires a laser amplifier system with exceptional parameters, mJ-level pulse energy, 10-15 fs pulse duration at 100 kHz (1 MHz) burst repetition rate. A new optical parametric chirped-pulse amplification (OPCPA) system is under development in order to meet these requirements, and very promising results have been achieved in the last three years. In parallel to this development, a new HHG concept is necessary to sustain high average power of the driving laser system and to generate harmonics with high conversion efficiencies. Currently, the highest conversion efficiency with HHG has been demonstrated using gas-filled capillary targets. For our application, only a free-jet target can be used for HHG, in order to overcome damage threshold limitations of HHG target optics at a high repetition rate. A novel dual-gas multijet gas target has been developed and first experiments show remarkable control of the degree of phase matching forming the basis for improved control of the harmonic photon flux and the XUV pulse characteristics. The basic idea behind the dual-gas concept is the insertion of matching zones in between multiple HHG sources. These matching sections are filled with hydrogen which

  14. A high repetition rate XUV seeding source for FLASH2

    Energy Technology Data Exchange (ETDEWEB)

    Willner, Arik

    2012-05-15

    Improved performance of free-electron laser (FEL) light sources in terms of timing stability, pulse shape and spectral properties of the amplified FEL pulses is of interest in material science, the fields of ultrafast dynamics, biology, chemistry and even special branches in industry. A promising scheme for such an improvement is direct seeding with high harmonic generation (HHG) in a noble gas target. A free-electron laser seeded by an external extreme ultraviolet (XUV) source is planned for FLASH2 at DESY in Hamburg. The requirements for the XUV/soft X-ray source can be summarized as follows: A repetition rate of at least 100 kHz in a 10 Hz burst is needed at variable wavelengths from 10 to 40 nm and pulse energies of several nJ within a single laser harmonic. This application requires a laser amplifier system with exceptional parameters, mJ-level pulse energy, 10-15 fs pulse duration at 100 kHz (1 MHz) burst repetition rate. A new optical parametric chirped-pulse amplification (OPCPA) system is under development in order to meet these requirements, and very promising results have been achieved in the last three years. In parallel to this development, a new HHG concept is necessary to sustain high average power of the driving laser system and to generate harmonics with high conversion efficiencies. Currently, the highest conversion efficiency with HHG has been demonstrated using gas-filled capillary targets. For our application, only a free-jet target can be used for HHG, in order to overcome damage threshold limitations of HHG target optics at a high repetition rate. A novel dual-gas multijet gas target has been developed and first experiments show remarkable control of the degree of phase matching forming the basis for improved control of the harmonic photon flux and the XUV pulse characteristics. The basic idea behind the dual-gas concept is the insertion of matching zones in between multiple HHG sources. These matching sections are filled with hydrogen which

  15. Influence of the degree of retting of flax fibers on the tensile properties of single fibers and short fiber/polypropylene composites

    OpenAIRE

    Martin, Nicolas; Mouret, Nicolas; Davies, Peter; Baley, Christophe

    2013-01-01

    The flax quality required for composite applications is not yet well established. Retting is one of the steps that are not well defined for these applications, and is a critical parameter during flax production. In this study, the influence of the degree of retting of flax on the properties of short flax fiber/polypropylene composites has been assessed. First, the degree of retting of gradually retted flax was measured by both qualitative and quantitative experimental techniques. In addition,...

  16. Lunar Impact Flash Locations from NASA's Lunar Impact Monitoring Program

    Science.gov (United States)

    Moser, D. E.; Suggs, R. M.; Kupferschmidt, L.; Feldman, J.

    2015-01-01

    Meteoroids are small, natural bodies traveling through space, fragments from comets, asteroids, and impact debris from planets. Unlike the Earth, which has an atmosphere that slows, ablates, and disintegrates most meteoroids before they reach the ground, the Moon has little-to-no atmosphere to prevent meteoroids from impacting the lunar surface. Upon impact, the meteoroid's kinetic energy is partitioned into crater excavation, seismic wave production, and the generation of a debris plume. A flash of light associated with the plume is detectable by instruments on Earth. Following the initial observation of a probable Taurid impact flash on the Moon in November 2005,1 the NASA Meteoroid Environment Office (MEO) began a routine monitoring program to observe the Moon for meteoroid impact flashes in early 2006, resulting in the observation of over 330 impacts to date. The main objective of the MEO is to characterize the meteoroid environment for application to spacecraft engineering and operations. The Lunar Impact Monitoring Program provides information about the meteoroid flux in near-Earth space in a size range-tens of grams to a few kilograms-difficult to measure with statistical significance by other means. A bright impact flash detected by the program in March 2013 brought into focus the importance of determining the impact flash location. Prior to this time, the location was estimated to the nearest half-degree by visually comparing the impact imagery to maps of the Moon. Better accuracy was not needed because meteoroid flux calculations did not require high-accuracy impact locations. But such a bright event was thought to have produced a fresh crater detectable from lunar orbit by the NASA spacecraft Lunar Reconnaissance Orbiter (LRO). The idea of linking the observation of an impact flash with its crater was an appealing one, as it would validate NASA photometric calculations and crater scaling laws developed from hypervelocity gun testing. This idea was

  17. Expression of the nos gene and firefly flashing: a test of the nitric-oxide-mediated flash control model.

    Science.gov (United States)

    Ohtsuki, Hajime; Yokoyama, Jun; Ohba, Nobuyoshi; Ohmiya, Yoshihiro; Kawata, Masakado

    2014-04-19

    Fireflies (Coleoptera: Lampyridae) emit various types of light that differ among species and populations of the same species. Their lights are assumed to be biological properties that play important ecological and evolutionary roles. Some species in the Lampyridae emit periodic luminescence, the patterns of which are characterized by species-specific intervals. In previous work, it was predicted that the nitric oxide (NO) regulates the oxygen supply required for the bioluminescence reaction of fireflies. Here, the expression of the NO synthase (NOS) mRNA in some fireflies was examined to verify the predictive model of nitric-oxide-mediated flash control in these insects. The expression of the nos gene in the lantern organ was observed not only in nocturnal flashing species but also in diurnal non-flashing species. It was shown that the expression levels of nos were higher in the lantern of Luciola cruciata (Motschulsky) larvae, which that emits continuous light, than in other body parts, although expression in the lantern of the adults, who flash periodically, was not high. Furthermore, there was no significant difference in expression levels among adults of Luciola cruciata characterized by different flashing intervals. The data do not support the model of an NO-mediated flash control mechanism, during which oxygen becomes available for the luciferin-luciferase reaction through NO-mediated inhibition of mitochondrial respiration. It is also indicated that flash patterns do not co-vary with NOS production. However, high nos expression in the larval lantern suggests that NO may play a role in producing continuous light by functioning as a neurotransmitter signal for bioluminescence. This is an open access paper. We use the Creative Commons Attribution 3.0 license that permits unrestricted use, provided that the paper is properly attributed.

  18. Search for the radio occulation flash at Jupiter

    International Nuclear Information System (INIS)

    Martin, J.M.; Tyler, G.L.; Eshleman, V.R.; Wood, G.E.; Lindall, G.F.

    1981-01-01

    The 'evolute flash' a focusing effect caused by the curvature of a planet's limb, was sought in the radio data taken during the occulation of Voyager 1 by Jupiter, using a modified matched-filter technique. The expected frequency structure of the flash signal is double branched, while the intensity structure is highly localized in time. The search for the signal was carried out over a 6.4 s period. The signal parameters were varied to span the uncertainties introduced by imperfect knowledge of the orbit of the spacecraft and the shape of Jupiter. Several peaks at the 8 standard deviation level were present in the filter output. However, these peaks were separated in time by up to 3.3 s, and none could be identified as the flash. From this negative result a lower bound on the absorption along a ray with periapsis near the 4 bar level in Jupiter's atmosphere can be established at 25 dB. Employing the new Voyager results on the structure of the atmosphere of Jupiter and the mixing ratio of the absorbent ammonia, as well as the improved knowledge of flash characteristics resulting from this study, we estimate that the flash would have been detected if the distance behind the planet where the spacecraft trajectory crossed the evolute were at least 20 Jupiter radii, as compared with a value near 7 in the experiment. For focusing at this greater distance, the atmospheric pressure at the ray periapsis would be between 1.5 and 2 bar

  19. Theoretical investigation of flash vaporisation in a screw expander

    Science.gov (United States)

    Vasuthevan, Hanushan; Brümmer, Andreas

    2017-08-01

    In the present study flash vaporisation of liquid injection in a twin screw expander for a Trilateral Flash Cycle (TFC) is examined theoretically. The TFC process comprises a pressure increase in the working fluid, followed by heating the liquid close to boiling point. The hot liquid is injected into the working chamber of a screw expander. During this process the pressure of the liquid drops below the saturation pressure, while the temperature of the liquid remains virtually constant. Hence the liquid is superheated and in a metastable state. The liquid jet seeks to achieve a stable state in thermodynamic equilibrium and is therefore partially vaporised. This effect is referred to as flash vaporisation. Accordingly, a two-phase mixture, consisting of vapour and liquid, exists in the working chamber. Thermodynamic simulations were carried out using water as the working fluid for representative screw expander geometry. The simulations presented are performed from two different aspects during the filling process of a screw expander. The first case is the vaporisation of the injected liquid in a state of thermodynamic equilibrium, whereby the two-phase mixture is treated entirely as a compressible and homogeneous gas. The second case considers flashing efficiency. It describes the quantity of flashed vapour and consists of a liquid and vapour domain. Both models are compared and analysed with respect to the operational behaviour of a screw expander.

  20. Venlafaxine and desvenlafaxine in the management of menopausal hot flashes

    Directory of Open Access Journals (Sweden)

    Johnson ED

    2011-09-01

    Full Text Available Vasomotor flushes are common complaints of women during and after menopause, affecting about 75 percent of this population. Estrogen therapy is the most effective treatment for hot flashes. However, there are a significant number of women who have contraindications or choose not to use estrogen due to potential risks such as breast cancer and thromboembolic disorders. These women need alternative options. The selective norepinephrine reuptake inhibitors, venlafaxine and desvenlafaxine, have shown efficacy in alleviating hot flashes.Objective: The purpose of this review is to assess the efficacy and tolerability of these two agents for treatment of hot flashes in healthy postmenopausal women.Methods: A literature search of the MEDLINE and Ovid databases from inception to June 2011 was conducted. Randomized controlled trials, published in English, with human participants were included. Studies included postmenopausal women, and trials with breast cancer only populations were excluded.Results: Venlafaxine reduced hot flashes by 37 to 61 percent and desvenlafaxine by 55 to 69 percent. Both agents were well tolerated. The most common adverse effects were headache, dry mouth, nausea, insomnia, somnolence, and dizziness.Conclusion: Based on the evidence, venlafaxine and desvenlafaxine are both viable options for reducing the frequency and severity of hot flashes.

  1. Modeling experimental plasma diagnostics in the FLASH code: proton radiography

    Science.gov (United States)

    Flocke, Norbert; Weide, Klaus; Feister, Scott; Tzeferacos, Petros; Lamb, Donald

    2017-10-01

    Proton radiography is an important diagnostic tool for laser plasma experiments and for studying magnetized plasmas. We describe a new synthetic proton radiography diagnostic recently implemented into the FLASH code. FLASH is an open source, finite-volume Eulerian, spatially adaptive radiation hydrodynamics and magneto-hydrodynamics code that incorporates capabilities for a broad range of physical processes. Proton radiography is modeled through the use of the (relativistic) Lorentz force equation governing the motion of protons through 3D domains. Both instantaneous (one time step) and time-resolved (over many time steps) proton radiography can be simulated. The code module is also equipped with several different setup options (beam structure and detector screen placements) to reproduce a large variety of experimental proton radiography designs. FLASH's proton radiography diagnostic unit can be used either during runtime or in post-processing of simulation results. FLASH is publicly available at flash.uchicago.edu. U.S. DOE NNSA, U.S. DOE NNSA ASC, U.S. DOE Office of Science and NSF.

  2. A Unified Flash Flood Database across the United States

    Science.gov (United States)

    Gourley, Jonathan J.; Hong, Yang; Flamig, Zachary L.; Arthur, Ami; Clark, Robert; Calianno, Martin; Ruin, Isabelle; Ortel, Terry W.; Wieczorek, Michael; Kirstetter, Pierre-Emmanuel; Clark, Edward; Krajewski, Witold F.

    2013-01-01

    Despite flash flooding being one of the most deadly and costly weather-related natural hazards worldwide, individual datasets to characterize them in the United States are hampered by limited documentation and can be difficult to access. This study is the first of its kind to assemble, reprocess, describe, and disseminate a georeferenced U.S. database providing a long-term, detailed characterization of flash flooding in terms of spatiotemporal behavior and specificity of impacts. The database is composed of three primary sources: 1) the entire archive of automated discharge observations from the U.S. Geological Survey that has been reprocessed to describe individual flooding events, 2) flash-flooding reports collected by the National Weather Service from 2006 to the present, and 3) witness reports obtained directly from the public in the Severe Hazards Analysis and Verification Experiment during the summers 2008–10. Each observational data source has limitations; a major asset of the unified flash flood database is its collation of relevant information from a variety of sources that is now readily available to the community in common formats. It is anticipated that this database will be used for many diverse purposes, such as evaluating tools to predict flash flooding, characterizing seasonal and regional trends, and improving understanding of dominant flood-producing processes. We envision the initiation of this community database effort will attract and encompass future datasets.

  3. Multi-Level Bitmap Indexes for Flash Memory Storage

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Madduri, Kamesh; Canon, Shane

    2010-07-23

    Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data at the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.

  4. Short philtrum

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003302.htm Short philtrum To use the sharing features on this page, please enable JavaScript. A short philtrum is a shorter than normal distance between ...

  5. Flash Flood Hazard Susceptibility Mapping Using Frequency Ratio and Statistical Index Methods in Coalmine Subsidence Areas

    Directory of Open Access Journals (Sweden)

    Chen Cao

    2016-09-01

    Full Text Available This study focused on producing flash flood hazard susceptibility maps (FFHSM using frequency ratio (FR and statistical index (SI models in the Xiqu Gully (XQG of Beijing, China. First, a total of 85 flash flood hazard locations (n = 85 were surveyed in the field and plotted using geographic information system (GIS software. Based on the flash flood hazard locations, a flood hazard inventory map was built. Seventy percent (n = 60 of the flooding hazard locations were randomly selected for building the models. The remaining 30% (n = 25 of the flooded hazard locations were used for validation. Considering that the XQG used to be a coal mining area, coalmine caves and subsidence caused by coal mining exist in this catchment, as well as many ground fissures. Thus, this study took the subsidence risk level into consideration for FFHSM. The ten conditioning parameters were elevation, slope, curvature, land use, geology, soil texture, subsidence risk area, stream power index (SPI, topographic wetness index (TWI, and short-term heavy rain. This study also tested different classification schemes for the values for each conditional parameter and checked their impacts on the results. The accuracy of the FFHSM was validated using area under the curve (AUC analysis. Classification accuracies were 86.61%, 83.35%, and 78.52% using frequency ratio (FR-natural breaks, statistical index (SI-natural breaks and FR-manual classification schemes, respectively. Associated prediction accuracies were 83.69%, 81.22%, and 74.23%, respectively. It was found that FR modeling using a natural breaks classification method was more appropriate for generating FFHSM for the Xiqu Gully.

  6. A radar-based hydrological model for flash flood prediction in the dry regions of Israel

    Science.gov (United States)

    Ronen, Alon; Peleg, Nadav; Morin, Efrat

    2014-05-01

    Flash floods are floods which follow shortly after rainfall events, and are among the most destructive natural disasters that strike people and infrastructures in humid and arid regions alike. Using a hydrological model for the prediction of flash floods in gauged and ungauged basins can help mitigate the risk and damage they cause. The sparsity of rain gauges in arid regions requires the use of radar measurements in order to get reliable quantitative precipitation estimations (QPE). While many hydrological models use radar data, only a handful do so in dry climate. This research presents a robust radar-based hydro-meteorological model built specifically for dry climate. Using this model we examine the governing factors of flash floods in the arid and semi-arid regions of Israel in particular and in dry regions in general. The hydrological model built is a semi-distributed, physically-based model, which represents the main hydrological processes in the area, namely infiltration, flow routing and transmission losses. Three infiltration functions were examined - Initial & Constant, SCS-CN and Green&Ampt. The parameters for each function were found by calibration based on 53 flood events in three catchments, and validation was performed using 55 flood events in six catchments. QPE were obtained from a C-band weather radar and adjusted using a weighted multiple regression method based on a rain gauge network. Antecedent moisture conditions were calculated using a daily recharge assessment model (DREAM). We found that the SCS-CN infiltration function performed better than the other two, with reasonable agreement between calculated and measured peak discharge. Effects of storm characteristics were studied using synthetic storms from a high resolution weather generator (HiReS-WG), and showed a strong correlation between storm speed, storm direction and rain depth over desert soils to flood volume and peak discharge.

  7. High-speed three-frame image recording system using colored flash units and low-cost video equipment

    Science.gov (United States)

    Racca, Roberto G.; Scotten, Larry N.

    1995-05-01

    This article describes a method that allows the digital recording of sequences of three black and white images at rates of several thousand frames per second using a system consisting of an ordinary CCD camcorder, three flash units with color filters, a PC-based frame grabber board and some additional electronics. The maximum framing rate is determined by the duration of the flashtube emission, and for common photographic flash units lasting about 20 microsecond(s) it can exceed 10,000 frames per second in actual use. The subject under study is strobe- illuminated using a red, a green and a blue flash unit controlled by a special sequencer, and the three images are captured by a color CCD camera on a single video field. Color is used as the distinguishing parameter that allows the overlaid exposures to be resolved. The video output for that particular field will contain three individual scenes, one for each primary color component, which potentially can be resolved with no crosstalk between them. The output is electronically decoded into the primary color channels, frame grabbed and stored into digital memory, yielding three time-resolved images of the subject. A synchronization pulse provided by the flash sequencer triggers the frame grabbing so that the correct video field is acquired. A scheme involving the use of videotape as intermediate storage allows the frame grabbing to be performed using a monochrome video digitizer. Ideally each flash- illuminated scene would be confined to one color channel, but in practice various factors, both optical and electronic, affect color separation. Correction equations have been derived that counteract these effects in the digitized images and minimize 'ghosting' between frames. Once the appropriate coefficients have been established through a calibration procedure that needs to be performed only once for a given configuration of the equipment, the correction process is carried out transparently in software every time a

  8. Short wavelength sources and atoms and ions

    International Nuclear Information System (INIS)

    Kennedy, E.T.

    2008-01-01

    The interaction of ionizing radiation with atoms and ions is a key fundamental process. Experimental progress has depended in particular on the development of short wavelength light sources. Laser-plasma and synchrotron sources have been exploited for several decades and most recently the development of short wavelength Free Electron Laser (FEL) sources is revolutionizing the field. This paper introduces laser plasma and synchrotron sources through examples of their use in studies of the interaction of ionizing radiation with atoms and ions, ranging from few-electron atomic and ionic systems to the many-electron high atomic number actinides. The new FEL source (FLASH) at DESY is introduced. (author)

  9. Impact of Crown-Implant Ratio of Single Restorations Supported by 6-mm Implants : A Short-Term Case Series Study

    NARCIS (Netherlands)

    Gulje, Felix L.; Raghoebar, Gerry M.; Erkens, Ward A. L.; Meijer, Henny J. A.

    PURPOSE: High crown-implant ratios might affect the biologic and technical performance of a reconstruction. The aim of this study was to assess whether a higher crown-implant ratio of single restorations on 6-mm implants resulted in more peri-implant bone loss and more prosthetic complications

  10. Flash X-Ray Apparatus With Spectrum Control Functions For Medical Use And Fuji Computed Radiography

    Science.gov (United States)

    Isobe, H.; Sato, E.; Hayasi, Y.; Suzuki, M.; Arima, H.; Hoshino, F.

    1985-02-01

    Flash radiographic bio-medical studies at sub-microsecond intervals were performed by using both a new type of flash X-ray(FX) apparatus with spectrum control functions and Fuji Computed Radiography(FCR). This single flasher tends to have a comparatively long exposure time and the electric pulse width of the FX wave form is about 0.3,usec. The maximum FX dose is about 50mR at 1m per pulse, and the effective focal spot varies according to condenser charging voltage, A-C distance, etc., ranging from 1.0 to 3.0mm in diameter, but in the low dose rate region it can be reduced to less than 1.0mm in diameter. The FX dose is determined by the condenser charging voltage and the A-C distance, while the FX spectrum is determined by the average voltage of the FX tube and filters. Various clear FX images were obtained by controlling the spectrum and dose. FCR is a new storage medium for medical radiography developed by the Fuji Photo Film Co., Ltd. and this apparatus has various image forming functions: low dose radiography, film density control, image contrast control, subtraction management and others. We have used this new apparatus in conjunction with our FX radiography and have obtained some new and interesting biomedical radiograms: the edge enhancement image, the instantaneous enlarged image, and the single exposure energy subtraction image using the FX spectrum distribution.

  11. Research on Multi Hydrological Models Applicability and Modelling Data Uncertainty Analysis for Flash Flood Simulation in Hilly Area

    Science.gov (United States)

    Ye, L.; Wu, J.; Wang, L.; Song, T.; Ji, R.

    2017-12-01

    Flooding in small-scale watershed in hilly area is characterized by short time periods and rapid rise and recession due to the complex underlying surfaces, various climate type and strong effect of human activities. It is almost impossible for a single hydrological model to describe the variation of flooding in both time and space accurately for all the catchments in hilly area because the hydrological characteristics can vary significantly among different catchments. In this study, we compare the performance of 5 hydrological models with varying degrees of complexity for simulation of flash flood for 14 small-scale watershed in China in order to find the relationship between the applicability of the hydrological models and the catchments characteristics. Meanwhile, given the fact that the hydrological data is sparse in hilly area, the effect of precipitation data, DEM resolution and their interference on the uncertainty of flood simulation is also illustrated. In general, the results showed that the distributed hydrological model (HEC-HMS in this study) performed better than the lumped hydrological models. Xinajiang and API models had good simulation for the humid catchments when long-term and continuous rainfall data is provided. Dahuofang model can simulate the flood peak well while the runoff generation module is relatively poor. In addition, the effect of diverse modelling data on the simulations is not simply superposed, and there is a complex interaction effect among different modelling data. Overall, both the catchment hydrological characteristics and modelling data situation should be taken into consideration in order to choose the suitable hydrological model for flood simulation for small-scale catchment in hilly area.

  12. Flash Points of Secondary Alcohol and n-Alkane Mixtures.

    Science.gov (United States)

    Esina, Zoya N; Miroshnikov, Alexander M; Korchuganova, Margarita R

    2015-11-19

    The flash point is one of the most important characteristics used to assess the ignition hazard of mixtures of flammable liquids. To determine the flash points of mixtures of secondary alcohols with n-alkanes, it is necessary to calculate the activity coefficients. In this paper, we use a model that allows us to obtain enthalpy of fusion and enthalpy of vaporization data of the pure components to calculate the liquid-solid equilibrium (LSE) and vapor-liquid equilibrium (VLE). Enthalpy of fusion and enthalpy of vaporization data of secondary alcohols in the literature are limited; thus, the prediction of these characteristics was performed using the method of thermodynamic similarity. Additionally, the empirical models provided the critical temperatures and boiling temperatures of the secondary alcohols. The modeled melting enthalpy and enthalpy of vaporization as well as the calculated LSE and VLE flash points were determined for the secondary alcohol and n-alkane mixtures.

  13. PNNL 331 Building Arc Flash Team Investigation Report

    Energy Technology Data Exchange (ETDEWEB)

    Deichman, Mark L.; Drewrey, John C.; Hodges, Hurtis; Madson, Vernon J.; Minton, Allen L.; Montgomery, Daniel M.; Olson, Marvin E.; Rojas, Pedro H.; Sanan, Sanjay K.; Sharp, Reed D.; Sparks, Bobby R.; Swearingen, Gary L.

    2006-06-06

    On Friday, April 21, 2006, a PNNL electrician was performing repair of an electrical system for the 331 Building chilled water pump (CHWP) No.2, when an electrical arc flash occurred inside a 480V combination motor starter. The electrician was taken to the on-site medical provider for evaluation and was released for return to work without restriction. The electrician was not shocked, but did receive a minor, superficial (first degree) burn on the left wrist. This report, the result of a thorough review by the 331 Building Arc Flash Assessment Team, provides an in-depth look at the steps leading up to the arc-flash and recommendations and opportunities for improvement.

  14. Architectural and Integration Options for 3D NAND Flash Memories

    Directory of Open Access Journals (Sweden)

    Rino Micheloni

    2017-08-01

    Full Text Available Nowadays, NAND Flash technology is everywhere, since it is the core of the code and data storage in mobile and embedded applications; moreover, its market share is exploding with Solid-State-Drives (SSDs, which are replacing Hard Disk Drives (HDDs in consumer and enterprise scenarios. To keep the evolutionary pace of the technology, NAND Flash must scale aggressively in terms of bit cost. When approaching ultra-scaled technologies, planar NAND is hitting a wall: both academia researchers and industry worked to cope with this issue for several decades. Then, the 3D integration approach turned out to be the definitive alternative by eventually reaching mass production. This review paper exposes several 3D NAND Flash memory technologies, along with their related integration challenges, by showing their different layouts, scaling trends and performance/reliability features.

  15. Visualization on triangle concept using Adobe Flash Professional SC6

    Science.gov (United States)

    Sagita, Laela; Ratih Kusumarini, Adha

    2017-12-01

    The purpose of this paper is to develop teaching aids using Adobe Flash Professional CS6 emphasize on Triangle concept. A new alternative way to deliver a basic concept in geometry with visualization is software Adobe Flash Professional CS 6. Research method is research and development with 5 phase of Ploom’s model, namely (1) preliminary, (2) design, (3) realization/ construction, (4) test, evaluation and revision, and 5) implementation. The results showed that teaching aids was valid, practice, and effective. Validity: expert judgement for material score is 3.95 and media expert judgement produce an average score of 3,2, both in the category are valid. Practically: the average of questionnaire response is 4,04 (good). Effectiveness: n-gain test value is 0,36 (medium). It concluded that developed of teaching aids using Adobe Flash CS6 on triangle can improve student achievement.

  16. Boiling water reactor stability revisited: The effects of flashing

    Energy Technology Data Exchange (ETDEWEB)

    Yadigaroglu, G. [Institute of Energy Technology, Swiss Federal Institute of Technology, ETH, ETH-Zentrum, CLT-C1, CH-8092 Zurich (Switzerland)]. E-mail: yadi@ethz.ch; Askari, B. [Institute of Energy Technology, Swiss Federal Institute of Technology, ETH, ETH-Zentrum, CLT-C1, CH-8092 Zurich (Switzerland)

    2005-05-01

    There are numerous investigations of two-phase flow stability with particular emphasis to BWR stability; these have become increasingly sophisticated and complete over the years. The basic features of a new development and frequency-domain code capable of considering all the channels (bundles) in a BWR, flashing of the coolant at low pressure, full coupling with 3D, two-group neutronics, etc. are described. The basic thermal-hydraulic model is used to study the effects of flashing on stability in a BWR-like channel. The behavior of the channel is highly dynamic. Contrary to what could have been intuitively guessed, the effect of flashing is stabilizing; the reasons and mechanisms leading to this are discussed.

  17. Boiling water reactor stability revisited: The effects of flashing

    International Nuclear Information System (INIS)

    Yadigaroglu, G.; Askari, B.

    2005-01-01

    There are numerous investigations of two-phase flow stability with particular emphasis to BWR stability; these have become increasingly sophisticated and complete over the years. The basic features of a new development and frequency-domain code capable of considering all the channels (bundles) in a BWR, flashing of the coolant at low pressure, full coupling with 3D, two-group neutronics, etc. are described. The basic thermal-hydraulic model is used to study the effects of flashing on stability in a BWR-like channel. The behavior of the channel is highly dynamic. Contrary to what could have been intuitively guessed, the effect of flashing is stabilizing; the reasons and mechanisms leading to this are discussed

  18. Flash Flood Type Identification within Catchments in Beijing Mountainous Area

    Science.gov (United States)

    Nan, W.

    2017-12-01

    Flash flood is a common type of disaster in mountainous area, Flash flood with the feature of large flow rate, strong flushing force, destructive power, has periodically caused loss to life and destruction to infrastructure in mountainous area. Beijing as China's political, economic and cultural center, the disaster prevention and control work in Beijing mountainous area has always been concerned widely. According to the transport mechanism, sediment concentration and density, the flash flood type identification within catchment can provide basis for making the hazards prevention and mitigation policy. Taking Beijing as the study area, this paper extracted parameters related to catchment morphological and topography features respectively. By using Bayes discriminant, Logistic regression and Random forest, the catchments in Beijing mountainous area were divided into water floods process, fluvial sediment transport process and debris flows process. The results found that Logistic regression analysis showed the highest accuracy, with the overall accuracy of 88.2%. Bayes discriminant and Random forest had poor prediction effects. This study confirmed the ability of morphological and topography features to identify flash flood process. The circularity ratio, elongation ratio and roughness index can be used to explain the flash flood types effectively, and the Melton ratio and elevation relief ratio also did a good job during the identification, whereas the drainage density seemed not to be an issue at this level of detail. Based on the analysis of spatial patterns of flash flood types, fluvial sediment transport process and debris flow process were the dominant hazards, while the pure water flood process was much less. The catchments dominated by fluvial sediment transport process were mainly distributed in the Yan Mountain region, where the fault belts were relatively dense. The debris flow process prone to occur in the Taihang Mountain region thanks to the abundant

  19. Fenomena Kerak Dalam Desalinasi Dengan Multi Stage Flash Distillation (Msf)

    OpenAIRE

    Alimah, Siti

    2006-01-01

    SCALING PHENOMENA IN DESALINATION WITH MULTI STAGE FLASH DISTILLATION (MSF). Assessment of scaling phenomena in MSF desalination has been carried out. Scale is one of predominantly problem in multi stage flash (MSF) desalination installation. The main types of scale in MSF are carbonat calcium (CaC03), hydroxide magnesium (Mg(OH)2) dan sulphate calcium (CaS04). CaC03 dan Mg(OH)2 scales result from the thermal decomposition of bicarbonate ion, however sulphate calcium scale result from reactio...

  20. Inception and development of voids in flashing liquids

    International Nuclear Information System (INIS)

    Jones, O.C. Jr.

    1979-06-01

    Recent work aimed at correctly describing nonequilibrium vapor generation rates in flashing liquids in decompressing flows similar to those which might be encountered in a loss of coolant accident in a nuclear reactor is summarized. Analysis is reviewed which describes the flashing inception superheat in terms of the turbulence intensity for a given expansion rate and initial temperature, and interfacial area density and interfacial heat flux, and the volumetric vapor generation rates. Comparisons with existing data are included and further experiments being undertaken are described, including typical recent results

  1. Effect of Soybeans on Hot Flashes in Postmenopausal Women

    Directory of Open Access Journals (Sweden)

    H Mozaffari-khosravi

    2009-10-01

    Full Text Available Introduction: Hot flashes are common and discomfortable signs of menopause that present with blazing sweatiness, sense of hotness, tachycardia and agitation. Hot flashes cause disturbances in daily activity and quality of night sleep. In spite of the effect of Hormone Replacement Therapy (HRT on hot flashes, nowadays, there are diverse opinions about HRT and the reason is that it has chronic complications. In addition, the acceptance of HRT by Iranian women is very low. Study of numerous texts has shown that isofliavone present in soybean is a phytoestrogen that could be effective in control of hot flashes. The purpose of the study is to examine the changes in time periods of hot flashes in response to consumption of 74 mg Isoflavone/day present in 60 grams soybeans in menopausal women. Methods: This study was a clinical trial with before and after design that included 31 postmenopausal women. The participants were assessed with respect to daily hot flashes at baseline and after one, two and three months of intervention. Participants consumed daily 60 grams soybeans for 3 months. Blood samples were taken at the start and end of intervention for determining levels of gonadotropins and estradiol. Data was analyzed by SPSS software. Results: There was a decrease in time period of hot flashes from baseline of 5.88±2.61 to 3.45±1.82 after one month, 2.73±1.57 after two months and 2.16±1.48 after three months of consumption of soybeans (P<0.001. There was decrease in levels of FSH, LH & estradiol after 3 months, but this decrease was not significant, except in the case of estradiol. Conclusion: In line with various studies proposing the use of soybeans in the form of concentrate, drink or capsule, this study suggests that consumption of soybeans (60 gr daily as snacks may be a safe and effective method for controlling hot flashes in postmenopausal women..

  2. Simulating Terrestrial Gamma Ray Flashes due to cosmic ray shower electrons and positrons

    Science.gov (United States)

    Connell, Paul

    2017-04-01

    The University of Valencia has developed a software simulator LEPTRACK to simulate the relativistic runaway electron avalanches, RREA, that are presumed to be the cause of Terrestrial Gamma Ray Flashes and their powerful accompanying Ionization/Excitation Flashes. We show here results of LEPTRACK simulations of RREA by the interaction of MeV energy electrons/positrons and photons in cosmic ray showers traversing plausible electric field geometries expected in storm clouds. The input beams of MeV shower products were created using the CORSIKA software package from the Karlsruhe Institute of Technology. We present images, videos and plots showing the different Ionization, Excitation and gamma-ray photon density fields produced, along with their time and spatial profile evolution, which depend critically on where the line of shower particles intercept the electric field geometry. We also show a new effect of incoming positrons in the shower, which make up a significant fraction of shower products, in particular their apparent "orbiting" within a high altitude negative induced shielding charge layer, which has been conjectured to produce a signature microwave emission, as well as a short range 511 keV annihilation line. The interesting question posed is if this conjectured positron emission can be observed and correlated with TGF orbital observations to show if a TGF originates in the macro E-fields of storm clouds or the micro E-fields of lightning leaders where this positron "orbiting" is not likely to occur.

  3. The single mandibular implant study - Short-term effects of the loading protocol on Oral Health-related Quality of Life.

    Science.gov (United States)

    Schwindling, Franz Sebastian; Raedel, Michael; Passia, Nicole; Freitag-Wolf, Sandra; Wolfart, Stefan; Att, Wael; Mundt, Torsten; Reissmann, Daniel; Ismail, Fadi; von Königsmark, Valerie; Kern, Matthias

    2018-02-02

    A single implant can be placed to retain an overdenture in the edentulous mandible. This study aimed at the development of Oral Health-related Quality of Life comparing immediate and delayed implant loading, i.e., loading after 3 months of submerged healing. In a randomized controlled trial, 158 participants received a single mandibular implant in the midline. Quality of life was measured using the summary score of the German 49-item Oral Health Impact Profile at baseline, one month after implant placement (direct loading group) as well as one and four months after loading. Mean scores at baseline were comparable. Four months after implantation, a decrease of mean scores was recognized for both groups, indicating a significantly enhanced quality of life after treatment. When comparing the groups after both 1 and 4 months of loading, quality of life was insignificantly higher in the delayed loading group (1 month: 42.1 vs. 32.3; 4 months: 33.6 vs. 27.7). For immediate loading, an insignificant tendency to an earlier improvement was recognized (Δ 1month-baseline : 9.7, compared to Δ 1month-baseline : 6.4). The single mandibular implant concept was associated with a positive impact on quality of life. However, no statistically significant influence of implant loading on quality of life was found. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  4. Flash 3D Planetary Entry, Descent and Landing Sensor Hardening Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash Ladar Video...

  5. Development of a 3D Flash LADAR Video Camera for Entry, Decent and Landing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera capable of a 30 Hz frame rate. Because Flash LADAR captures an...

  6. Development of a 3D Flash LADAR Video Camera for Entry, Decent, and Landing, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash LADAR captures...

  7. Development of PIN Diode Detector Arrays for 3D Flash LIDAR Space Applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a number of 3D Flash LIDAR systems. Flash LIDAR sensors are 3D video systems that return range and intensity...

  8. Flash 3D Planetary Entry, Descent and Landing Sensor Hardening, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts Inc. (ASC) is a small business that has developed a number of 3D flash LADAR systems. Flash Ladar Video Cameras are 3D video cameras...

  9. FPGA technology application in a fast measurement and control system for the TESLA superconducting cavity of a FLASH free electron laser

    Science.gov (United States)

    Pozniak, Krzysztof T.

    2007-08-01

    Contemporary basic research in physics, biology, chemistry, pharmacology, material technology and other branches uses methods based on sample penetration (and the effect measurement) with pulsed ultra-short EM waves of very high beam intensity. This paper is an overview of a free electron laser (FEL) used in such methods. A method for the stabilization of the EM field in a superconducting 'TESLA' cavity accelerator for electrons is presented. This requires precise measurements of the field. The SC accelerator is a basic part of the FEL. The given example concerns the FLASH machine in DESY. The presented, high power EM field stabilization system is based on FPGA circuits with embedded fast hardware multiplication blocks. Examples of a few families of such new generation practically designed and constructed system realizations are given. The system is referred to as the SIMCON (from the microwave superconducting cavity SIMulator and CONtroller). SIMCONs consist of either single-module, multi-module configurable or multichannel distributed units. The SIMCON system stabilizes the EM field by a very fast feedback loop with an adaptation process, supplemented with a feed-forward. The following are presented: a parametric hardware description (firmware) in the form of behavioural VHDL algorithms; implementation results in VirtexIIPro circuits; examples of measurements of high power EM field stability performed under the nominal conditions of accelerator work.

  10. Single-portal-phase low-tube-voltage dual-energy CT for short-term follow-up of acute pancreatitis: evaluation of CT severity index, interobserver agreement and radiation dose

    Energy Technology Data Exchange (ETDEWEB)

    Wichmann, Julian L. [University Hospital Frankfurt, Department of Diagnostic and Interventional Radiology, Frankfurt am Main (Germany); Universitaetsklinikum Frankfurt, Institut fuer Diagnostische und Interventionelle Radiologie, Frankfurt am Main (Germany); Majenka, Pawel; Beeres, Martin; Kromen, Wolfgang; Schulz, Boris; Bauer, Ralf W.; Kerl, J.M.; Gruber-Rouh, Tatjana; Hammerstingl, Renate; Vogl, Thomas J.; Lehnert, Thomas [University Hospital Frankfurt, Department of Diagnostic and Interventional Radiology, Frankfurt am Main (Germany); Wesarg, Stefan [Fraunhofer IGD, Cognitive Computing and Medical Imaging, Darmstadt (Germany)

    2014-11-15

    To intra-individually compare single-portal-phase low-tube-voltage (100-kVp) computed tomography (CT) with 120-kVp images for short-term follow-up assessment of CT severity index (CTSI) of acute pancreatitis, interobserver agreement and radiation dose. We retrospectively analysed 66 patients with acute pancreatitis who underwent initial dual-contrast-phase CT (unenhanced, arterial, portal phase) at admission and short-term (mean interval 11.4 days) follow-up dual-contrast-phase dual-energy CT. The 100-kVp and linearly blended images representing 120-kVp acquisition follow-up CT images were independently evaluated by three radiologists using a modified CTSI assessing pancreatic inflammation, necrosis and extrapancreatic complications. Scores were compared with paired t test and interobserver agreement was evaluated using intraclass correlation coefficients (ICC). Mean CTSI scores on unenhanced, portal- and dual-contrast-phase images were 4.9, 6.1 and 6.2 (120 kVp) and 5.0, 6.0 and 6.1 (100 kVp), respectively. Contrast-enhanced series showed a higher CTSI compared to unenhanced images (P < 0.05) but no significant differences between single- and dual-contrast-phase series (P > 0.7). CTSI scores were comparable for 100-kVp and 120-kVp images (P > 0.05). Interobserver agreement was substantial for all evaluated series and subcategories (ICC 0.67-0.93). DLP of single-portal-phase 100-kVp images was reduced by 41 % compared to 120-kVp images (363.8 versus 615.9 mGy cm). Low-tube-voltage single-phase 100-kVp CT provides sufficient information for follow-up evaluation of acute pancreatitis and significantly reduces radiation exposure. (orig.)

  11. Higher Order Modes in Third Harmonic Cavities for XFEL/FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Shinton, I.R.R.; /Manchester U. /Cockcroft Inst. Accel. Sci. Tech.; Baboi, N.; /DESY; Eddy, N.; /Fermilab; Flisgen, T.; Glock, H.W.; /Rostock U.; Jones, R.M.; Juntong, N.; /Manchester U. /DESY; Khabiboulline, T.N.; /Fermilab; van Rienen, U; /Rostock U.; Zhang, P.; /Manchester U. /DESY /Cockcroft Inst. Accel. Sci. Tech.

    2010-06-01

    We analyse higher order modes in the 3.9 GHz bunch shaping cavities recently installed in the FLASH facility at DESY. We report on recent experimental results on the frequency spectrum from probe based measurements made at CMTB at DESY. These are compared to those predicted by finite difference and finite element computer codes. This study is focused mainly on the dipole component of the multi-pole expansion of the wakefield. The modes are readily identifiable as single-cavity modes provided the frequencies of these modes are below the cut-off of the inter-connecting beam pipes. The modes above cut-off are coupled to the 4 cavities and are distinct from single cavity modes.

  12. The core helium flash revisited. III. From Population I to Population III stars

    Science.gov (United States)

    Mocák, M.; Campbell, S. W.; Müller, E.; Kifonidis, K.

    2010-09-01

    Context. Degenerate ignition of helium in low-mass stars at the end of the red giant branch phase leads to dynamic convection in their helium cores. One-dimensional (1D) stellar modeling of this intrinsically multi-dimensional dynamic event is likely to be inadequate. Previous hydrodynamic simulations imply that the single convection zone in the helium core of metal-rich Pop I stars grows during the flash on a dynamic timescale. This may lead to hydrogen injection into the core and to a double convection zone structure as known from one-dimensional core helium flash simulations of low-mass Pop III stars. Aims: We perform hydrodynamic simulations of the core helium flash in two and three dimensions to better constrain the nature of these events. To this end we study the hydrodynamics of convection within the helium cores of a 1.25 M_⊙ metal-rich Pop I star (Z = 0.02), and, for the first time, a 0.85 M_⊙ metal-free Pop III star (Z = 0) near the peak of the flash. These models possess single and double convection zones, respectively. Methods: We use 1D stellar models of the core helium flash computed with state-of-the-art stellar evolution codes as initial models for our multidimensional hydrodynamic study, and simulate the evolution of these models with the Riemann solver based hydrodynamics code Herakles, which integrates the Euler equations coupled with source terms corresponding to gravity and nuclear burning. Results: The hydrodynamic simulation of the Pop I model involving a single convection zone covers 27 h of stellar evolution, while the hydrodynamic simulations of a double convection zone, in the Pop III model, span 1.8 h of stellar life. We find differences between the predictions of mixing length theory and our hydrodynamic simulations. The simulation of the single convection zone in the Pop I model shows a strong growth of the size of the convection zone due to turbulent entrainment. We therefore predict that for the Pop I model a hydrogen injection

  13. The use of radar in hydrological modeling in the Czech Republic – case studies of flash floods

    Directory of Open Access Journals (Sweden)

    M. Šálek

    2006-01-01

    Full Text Available Flash flood induced by severe convection is the hydrometeorological phenomenon that is very difficult to forecast. However, the implementation of radar measurements, especially radar-based Quantitative Precipitation Estimate (QPE and/or radar-based quantitative Precipitation Nowcast (QPN can improve this situation. If the radar is able to capture the development of severe convection and can produce reasonably accurate QPE in short time intervals (e.g. 10 min, then it can be used also with hydrological model. A hydrological model named Hydrog was used for investigation of simulation and possible forecasts of two flash floods that took place in the Czech Republic in 2002 and 2003. The precipitation input consisted of mean-field-bias-adjusted or original radar 10-min estimates along with quantitative precipitation nowcasts up to 2 h based on COTREC method (extrapolation. Taking into account all the limited predictability of the severe convection development and the errors of the radar-based precipitation estimates, the aim of the simulations was to find out to what extend the hydrometeorological prediction system, specifically tuned for these events, was able to forecast a the flash floods. As assumed, the hydrometeorological simulations of the streamflow forecasts lagged behind the actual development but there is still some potential for successful warning, especially for areas where the flood hits lately.

  14. Flash pyrolysis of coal, coal maceral, and coal-derived pyrite with on-line characterization of volatile sulfur compounds

    Science.gov (United States)

    Chou, I.-Ming; Lake, M.A.; Griffin, R.A.

    1988-01-01

    A Pyroprobe flash pyrolysis-gas chromatograph equipped with a flame photometric detector was used to study volatile sulfur compounds produced during the thermal decomposition of Illinois coal, coal macerals and coal-derived pyrite. Maximum evolution of volatile organic sulfur compounds from all coal samples occurred at a temperature of approximately 700??C. At this temperature, the evolution of thiophene, its alkyl isomers, and short-chain dialkyl sulfide compounds relative to the evolution of benzothiophene and dibenzothiophene compounds was greater from coal high in organic sulfur than from coal low in organic sulfur. The variation in the evolution of sulfur compounds observed for three separate coal macerals (exinite, vitrinite, and inertinite) was similar to that observed for whole coal samples. However, the variation trend for the macerals was much more pronounced. Decomposition of coal-derived pyrite with the evolution of elemental sulfur was detected at a temperature greater than 700??C. The results of this study indicated that the gas chromotographic profile of the volatile sulfur compounds produced during flash pyrolysis of coals and coal macerals varied as a function of the amount of organic sulfur that occurred in the samples. Characterization of these volatile sulfur compounds provides a better understanding of the behavior of sulfur in coal during the thermolysis process, which could be incorporated in the design for coal cleaning using flash pyrolysis techniques. ?? 1988.

  15. The 9 September 2010 torrential rain and flash flood in the Dragone catchment, Atrani, Amalfi Coast (southern Italy)

    Science.gov (United States)

    Violante, C.; Braca, G.; Esposito, E.; Tranfaglia, G.

    2016-02-01

    In this paper we use a multi-hazard approach to analyse the 9 September 2010 flash flood in the Dragone basin, a 9 km2 catchment located along the Amalfi rocky coastal range, southern Italy. In this area, alluvial fan flooding has been the most frequent and destructive geologic hazard since Roman times. Sudden torrents of water (flash floods) are caused by high-intensity and very localized cloudbursts of short duration, inducing slope erosion and sediment delivery from slope to stream. The elevated bed load transport produces fast-moving hyperconcentrated flows with significant catastrophic implications for communities living at the stream mouth. The 9 September 2010 rainstorm event lasted 1 h with an intensity rainfall peak of nearly 120 mm h-1. High topographic relief of the Amalfi coastal range and positive anomalies of the coastal waters conditioned the character of the convective system. Based on geological data and post-event field evidence and surveys, as well as homemade videos and eyewitness accounts, it is reported that the flash flood mobilized some 25 000 m3 of materials with a total (water and sediment) peak flow of 80 m3 s-1. The estimated peak discharge of only clear water was about 65 m3 s-1. This leads to a sediment bulking factor of 1.2 that corresponds to a flow with velocities similar to those of water during a flood.

  16. Single-lane 180  Gbit/s PAM-4 signal transmission over 2  km SSMF for short-reach applications.

    Science.gov (United States)

    Zhang, Qiang; Stojanovic, Nebojsa; Prodaniuc, Cristian; Xie, Changsong; Koenigsmann, Michael; Laskowski, Piotr

    2016-10-01

    We experimentally demonstrate the generation and transmission of a single-lane 180  Gbit/s (90 GBaud) four-level pulse-amplitude modulation (PAM-4) signal in an intensity-modulation direct-detection system with a 7.5 GHz 3 dB bandwidth. The generated signal is transmitted over a 2 km standard single-mode fiber with, to the best of our knowledge, the highest reported net data rate in the C-band: 150  Gbit/s. A net data rate of 168  Gbit/s is also reachable with 1 km reach. The PAM-4 and duobinary (DB) PAM-4 modulation schemes are compared; the obtained results show that DB-PAM-4 significantly outperforms PAM-4 in the considered strong bandwidth-constrained system. Both a feed-forward equalizer and a maximum-likelihood sequence estimator are investigated for data recovery.

  17. Robust Image Denoising using a Virtual Flash Image for Monte Carlo Ray Tracing

    DEFF Research Database (Denmark)

    Moon, Bochang; Jun, Jong Yun; Lee, JongHyeob

    2013-01-01

    We propose an efficient and robust image-space denoising method for noisy images generated by Monte Carlo ray tracing methods. Our method is based on two new concepts: virtual flash images and homogeneous pixels. Inspired by recent developments in flash photography, virtual flash images emulate...

  18. Recovery of Flash Memories for Reliable Mobile Storages

    Directory of Open Access Journals (Sweden)

    Daesung Moon

    2010-01-01

    Full Text Available As the mobile appliance is applied to many ubiquitous services and the importance of the information stored in it is increased, the security issue to protect the information becomes one of the major concerns. However, most previous researches focused only on the communication security, not the storage security. Especially, a flash memory whose operational characteristics are different from those of HDD is used increasingly as a storage device for the mobile appliance because of its resistance to physical shock and lower power requirement. In this paper, we propose a flash memory management scheme targeted for guaranteeing the data integrity of the mobile storage. By maintaining the old data specified during the recovery window, we can recover the old data when the mobile appliance is attacked. Also, to reduce the storage requirement for the recovery, we restrict the number of versions to be copied, called Degree of Integrity (DoI. Especially, we consider both the reclaim efficiency and the wear leveling which is a unique characteristic of the flash memory. Based on the performance evaluation, we confirm that the proposed scheme can be acceptable to many applications as a flash memory management scheme for improving data integrity.

  19. Normalized Temperature Contrast Processing in Flash Infrared Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2016-01-01

    The paper presents further development in normalized contrast processing of flash infrared thermography method by the author given in US 8,577,120 B1. The method of computing normalized image or pixel intensity contrast, and normalized temperature contrast are provided, including converting one from the other. Methods of assessing emissivity of the object, afterglow heat flux, reflection temperature change and temperature video imaging during flash thermography are provided. Temperature imaging and normalized temperature contrast imaging provide certain advantages over pixel intensity normalized contrast processing by reducing effect of reflected energy in images and measurements, providing better quantitative data. The subject matter for this paper mostly comes from US 9,066,028 B1 by the author. Examples of normalized image processing video images and normalized temperature processing video images are provided. Examples of surface temperature video images, surface temperature rise video images and simple contrast video images area also provided. Temperature video imaging in flash infrared thermography allows better comparison with flash thermography simulation using commercial software which provides temperature video as the output. Temperature imaging also allows easy comparison of surface temperature change to camera temperature sensitivity or noise equivalent temperature difference (NETD) to assess probability of detecting (POD) anomalies.

  20. Measuring and Estimating Normalized Contrast in Infrared Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2013-01-01

    Infrared flash thermography (IRFT) is used to detect void-like flaws in a test object. The IRFT technique involves heating up the part surface using a flash of flash lamps. The post-flash evolution of the part surface temperature is sensed by an IR camera in terms of pixel intensity of image pixels. The IR technique involves recording of the IR video image data and analysis of the data using the normalized pixel intensity and temperature contrast analysis method for characterization of void-like flaws for depth and width. This work introduces a new definition of the normalized IR pixel intensity contrast and normalized surface temperature contrast. A procedure is provided to compute the pixel intensity contrast from the camera pixel intensity evolution data. The pixel intensity contrast and the corresponding surface temperature contrast differ but are related. This work provides a method to estimate the temperature evolution and the normalized temperature contrast from the measured pixel intensity evolution data and some additional measurements during data acquisition.

  1. The Status of the Ultra Fast Flash Observatory - Pathfinder

    DEFF Research Database (Denmark)

    Nam, J. W.; Ahmad, S.; Ahn, K. B.

    2014-01-01

    The Ultra Fast Flash Observatory (UFFO) is a project to study early optical emissions from Gamma Ray Bursts (GRBs). The primary scientific goal of UFFO is to see if GRBs can be calibrated with their rising times, so that they could be used as new standard candles. In order to minimize delay in op...

  2. Method and apparatus for flash evaporation of liquids

    Science.gov (United States)

    Bharathan, Desikan

    1984-01-01

    A vertical tube flash evaporator for introducing a superheated liquid into a flash evaporation chamber includes a vertical inlet tube with a flared diffuser portion at its upper outlet end. A plurality of annular screens are positioned in axially spaced-apart relation to each other around the periphery of the vertical tube and below the diffuser portion thereof. The screens are preferably curved upward in a cup-shaped configuration. These flash evaporators are shown in an ocean thermal energy conversion unit designed for generating electric power from differential temperature gradients in ocean water. The method of use of the flash evaporators of this invention includes flowing liquid upwardly through the vertical tube into the diffuser where initial expansion and boiling occurs quite violently and explosively. Unvaporized liquid sheets and drops collide with each other to enhance surface renewal and evaporation properties, and liquid flowing over the outlet end of the diffuser falls onto the curved screens for further surface renewal and evaporation.

  3. Portable flash x-ray systems: applications and techniques

    International Nuclear Information System (INIS)

    Bryant, L.E. Jr.

    1976-01-01

    Three energies of portable flash x-ray equipment are described, and applications such as jetting and high explosive studies, bullet impact and casting of lead experiments are given as well as techniques for triggering and protection of equipment and film

  4. Implementation of Power Efficient Flash Analogue-to-Digital Converter

    Directory of Open Access Journals (Sweden)

    Taninki Sai Lakshmi

    2014-01-01

    Full Text Available An efficient low power high speed 5-bit 5-GS/s flash analogue-to-digital converter (ADC is proposed in this paper. The designing of a thermometer code to binary code is one of the exacting issues of low power flash ADC. The embodiment consists of two main blocks, a comparator and a digital encoder. To reduce the metastability and the effect of bubble errors, the thermometer code is converted into the gray code and there after translated to binary code through encoder. The proposed encoder is thus implemented by using differential cascade voltage switch logic (DCVSL to maintain high speed and low power dissipation. The proposed 5-bit flash ADC is designed using Cadence 180 nm CMOS technology with a supply rail voltage typically ±0.85 V. The simulation results include a total power dissipation of 46.69 mW, integral nonlinearity (INL value of −0.30 LSB and differential nonlinearity (DNL value of −0.24 LSB, of the flash ADC.

  5. Visual reinforcement audiometry: an Adobe Flash based approach.

    Science.gov (United States)

    Atherton, Steve

    2010-09-01

    Visual Reinforcement Audiometry (VRA) is a key behavioural test for young children. It is central to the diagnosis of hearing-impaired infants (1) . Habituation to the visual reinforcement can give misleading results. Medical Illustration ABM University Health Board has designed a collection of Flash animations to overcome this.

  6. Emotional Semantic Recognition of Visual Scene in Flash Animation

    Directory of Open Access Journals (Sweden)

    Shi Lin

    2018-01-01

    Full Text Available Based on the organization structure of the Flash animation files, we first use the edge density method to segment the Flash animation to obtain the visual scenes, then extract the visual features such as color and texture as the input parameters of BP neural network, and set up the sample database. Secondly, we choose a suitable model for emotion classification, use eight kinds of emotional adjectives to describe the emotion of Flash animation, such as warm, delightful, exaggerated, funny, desolate, dreary, complex, and illusory, and mark the emotion value of the visual scene in the sample database and so use it as the output parameter of the BP neural network. Finally, we use BP neural network with appropriate transfer function and learning function for training to obtain the rules for mapping from visual features of the visual scene to semantic space and, at last, complete the automatic classification work of emotional semantic of the visual scene. We used the algorithm to carry on the emotional semantics recognition to 5012 visual scenes, and the experiment effect is good. The results of our study can be used in the classification, retrieval, and other fields of Flash animation based on emotional semantics.

  7. RAND-Based Formulations for Isothermal Multiphase Flash

    DEFF Research Database (Denmark)

    Paterson, Duncan; Michelsen, Michael L.; Stenby, Erling H.

    2018-01-01

    Two algorithms are proposed for isothermal multiphase flash. These are referred to as modified RAND and vol-RAND. The former uses the chemical potentials and molar-phase amounts as the iteration variables, while the latter uses chemical potentials and phase volumes to cosolve a pressure...

  8. Flash release - an alternative for releasing complex mems devices

    NARCIS (Netherlands)

    Deladi, S.; Svetovoy, Vitaly; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2004-01-01

    A novel time-saving and cost-effective release technique has been developed and is described. The physical nature of the process is explained in combination with experimental observations. The results of the flash release process are compared with those of freeze-drying and supercritical CO2

  9. Flash release an alternative for releasing complex MEMS devices

    NARCIS (Netherlands)

    Deladi, S.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2004-01-01

    A novel time-saving and cost-effective release technique has been developed and is described. The physical nature of the process is explained in combination with experimental observations. The results of the flash release process are compared with those of freeze-drying and supercritical CO2

  10. High-frequency Trading, Algorithmic Finance, and the Flash Crash

    DEFF Research Database (Denmark)

    Borch, Christian

    2016-01-01

    automated trading algorithms are prone to run amok in unanticipated frenzy. In this paper, I discuss how and why the Flash Crash is being invoked as a significant event in debates about high-frequency trading and algo-financial markets. I analyse the mediatization of the event, as well as the variety...... about resonance in quantitative finance....

  11. Flash-flood potential assessment and mapping by integrating the ...

    Indian Academy of Sciences (India)

    Romulus Costache

    2017-06-16

    Jun 16, 2017 ... A basic step in flood risk management is identifying areas susceptible to flood occurrences. This paper proposes a methodology ... river channels and flood wave propagation from the upper area of the basin to the lower ... to improve the quality of flash-flood forecasts. Four geographical variables (slope ...

  12. Direct Observations of Different Sunspot Waves Influenced by Umbral Flashes

    Science.gov (United States)

    Sharma, Aishawnnya; Gupta, G. R.; Tripathi, Durgesh; Kashyap, V.; Pathak, Amit

    2017-12-01

    We report the simultaneous presence of chromospheric umbral flashes and associated umbral waves, and propagating coronal disturbances, in a sunspot and related active region. We have analyzed time-distance maps obtained using the observations from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. These maps show the simultaneous occurrence of different sunspot oscillations and waves such as umbral flashes, umbral waves, and coronal waves. Analysis of the original light curves, i.e., without implementing any Fourier filtering on them, shows that the amplitudes of different sunspot waves observed at different atmospheric layers change in synchronization with the light curves obtained from the umbral flash region, thus demonstrating that these oscillations are modulated by umbral flashes. This study provides the first observational evidence of the influence of sunspot oscillations within the umbra on other sunspot waves extending up to the corona. The properties of these waves and oscillations can be utilized to study the inherent magnetic coupling among different layers of the solar atmosphere above sunspots.

  13. Anomalous electric field changes and high flash rate beneath a ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Earth System Science; Volume 119; Issue 5. Anomalous electric field changes and high flash rate beneath a thunderstorm in northeast India ... Further,all electric field changes after a lightning discharge indicates the presence of strong Lower Positive Charge Centers (LPCC)in the active and ...

  14. Impact of patient-prosthesis mismatch following aortic valve replacement on short-term survival: a retrospective single center analysis of 632 consecutive patients with isolated stented biological aortic valve replacement.

    Science.gov (United States)

    Hoffmann, Grischa; Ogbamicael, Selam Abraham; Jochens, Arne; Frank, Derk; Lutter, Georg; Cremer, Jochen; Petzina, Rainer

    2014-09-01

    The impact of patient-prosthesis mismatch (PPM) after aortic valve replacement (AVR) on short-term and long-term mortality remains controversial. The objective of this study was to evaluate the incidence and severity of PPM and its impact on short-term survival in a large cohort of patients treated with isolated stented biological AVR in a single institution. We analyzed retrospectively data of 632 consecutive patients with aortic stenosis undergoing isolated stented biological AVR between January 2007 and February 2012 at our institution. PPM was defined as an indexed effective orifice area ≤ 0.85 cm(2)/m(2). Statistical analyses were performed to identify influencing variables on valve size implanted. Of the 632 patients investigated, 46% were females and mean age was 71.9 ± 10.4 years. PPM was observed in 93.8% (593 of 632 patients). In 71% of the patients, moderate (0.65-0.85 cm(2)/m(2)) PPM was present and in 22.8% severe (body mass index, and body surface area as simultaneous predictors of the valve size implanted (R(2)= 0.39). PPM had no discernable impact on short-term survival, although it was present in 93.8% of our patients following isolated stented biological AVR. Georg Thieme Verlag KG Stuttgart · New York.

  15. Short-term functional and oncological outcomes of partial nephrectomy for renal cell carcinoma in patients with an anatomically or functionally solitary kidney: single-center experience.

    Science.gov (United States)

    Maehana, Takeshi; Tanaka, Toshiaki; Kitamura, Hiroshi; Masumori, Naoya; Tsukamoto, Taiji

    2013-12-01

    We retrospectively investigated short-term functional and oncological outcomes of partial nephrectomy (PN) for the anatomically or functionally solitary kidney in patients with renal cell carcinoma. Between 1993 and 2011, 193 partial nephrectomies were performed and 16 (8.3 %) had an imperative indication in our institution. The patients' characteristics, peri- and postoperative complications, surgical margin status and postoperative changes in estimated glomerular filtration rates (eGFR) were assessed. The median follow-up period was 31.2 months and median age was 69.5 years. Open and laparoscopic PN were performed for 13 and 2 patients, respectively. One patient received ex-vivo PN followed by autotransplantation. There was no case with a positive surgical margin. All patients survived at the final day of observation. Median preoperative eGFR was 48.67 mL/min/1.73 m(2) and the reduction rate of eGFR at 3 months after operation was 20.9 % (0-50.2). Three patients (18.8 %) required temporary hemodialysis after operation and all these patients had stage 4 chronic kidney disease (CKD) before operation. Only one patient needed chronic hemodialysis at 8 months after operation. PN can be performed safely and provides feasible functional and oncological outcomes. Preoperative CKD stage 4 patients may have a risk of temporary hemodialysis in the perioperative period.

  16. Effects of a Short-Term Dance Movement Therapy Program on Symptoms and Stress in Patients With Breast Cancer Undergoing Radiotherapy: A Randomized, Controlled, Single-Blind Trial.

    Science.gov (United States)

    Ho, Rainbow T H; Fong, Ted C T; Cheung, Irene K M; Yip, Paul S F; Luk, Mai-Yee

    2016-05-01

    Integrated interventions with combined elements of body movement and psychotherapy on treatment-related symptoms in cancer patients are relatively scarce. The aim of the present study is to investigate the effectiveness of dance movement therapy (DMT) on improving treatment-related symptoms in a randomized controlled trial. A total of 139 Chinese patients with breast cancer awaiting adjuvant radiotherapy were randomized to DMT or control group. The intervention included six 1.5-hour DMT sessions provided twice a week over the course of radiotherapy. Self-report measures on perceived stress, anxiety, depression, fatigue, pain, sleep disturbance, and quality of life were completed before and after the three-week program. DMT showed significant effects on buffering the deterioration in perceived stress, pain severity, and pain interference (Cohen d = 0.34-0.36, P  0.05). The short-term DMT program can counter the anticipated worsening of stress and pain in women with breast cancer during radiotherapy. Copyright © 2016 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  17. Highly parallel and short-acting amplification with locus-specific primers to detect single nucleotide polymorphisms by the DigiTag2 assay.

    Directory of Open Access Journals (Sweden)

    Nao Nishida

    Full Text Available The DigiTag2 assay enables analysis of a set of 96 SNPs using Kapa 2GFast HotStart DNA polymerase with a new protocol that has a total running time of about 7 hours, which is 6 hours shorter than the previous protocol. Quality parameters (conversion rate, call rate, reproducibility and concordance were at the same levels as when genotype calls were acquired using the previous protocol. Multiplex PCR with 192 pairs of locus-specific primers was available for target preparation in the DigiTag2 assay without the optimization of reaction conditions, and quality parameters had the same levels as those acquired with 96-plex PCR. The locus-specific primers were able to achieve sufficient (concentration of target amplicon ≥5 nM and specific (concentration of unexpected amplicons <2 nM amplification within 2 hours, were also able to achieve detectable amplifications even when working in a 96-plex or 192-plex form. The improved DigiTag2 assay will be an efficient platform for screening an intermediate number of SNPs (tens to hundreds of sites in the replication analysis after genome-wide association study. Moreover, highly parallel and short-acting amplification with locus-specific primers may thus facilitate widespread application to other PCR-based assays.

  18. On the Connection of Gamma-Ray Bursts and X-Ray Flashes

    Science.gov (United States)

    Ripa, J.; Meszaros, A.

    2017-12-01

    Classification of gamma-ray bursts (GRBs) into groups has been intensively studied by various statistical tests since 1998. It has been suggested that next to the groups of short/hard and long/soft GRBs there could be another class of intermediate durations. For the Swift/BAT database Veres et al. 2010 (ApJ, 725, 1955) it was found that the intermediate-duration bursts might be related to X-ray flashes (XRFs). On the other hand, Ripa and Meszaros 2016 (Ap&SS, 361, 370) and Ripa et al. 2012 (ApJ, 756, 44) found that the intermediate-duration GRBs in the RHESSI database are spectrally too hard to be given by XRFs. Also, in the BATSE database the intermediate-duration GRBs can be only partly populated by XRFs. The key ideas of the Ripa and Meszaros 2016 (Ap&SS, 361, 370) article are summarized in this poster.

  19. A UAV based system for real time flash flood monitoring in desert environments using Lagrangian microsensors

    KAUST Repository

    Abdelkader, Mohamed

    2013-05-01

    Floods are the most common natural disasters, causing thousands of casualties every year in the world. In particular, flash flood events are particularly deadly because of the short timescales on which they occur. Most casualties could be avoided with advance warning, for which real time monitoring is critical. While satellite-based high resolution weather forecasts can help predict floods to a certain extent, they are not reliable enough, as flood models depend on a large number of parameters that cannot be estimated beforehand. In this article, we present a novel flood sensing architecture to monitor large scale desert hydrological basins surrounding metropolitan areas, based on unmanned air vehicles. The system relies on Lagrangian (mobile) microsensors, that are released by a swarm of UAVs. A preliminary testbed implementing this technology is briefly described, and future research directions and problems are discussed. © 2013 IEEE.

  20. Optimisation of Lagrangian Flash Flood Microsensors Dropped by Unmanned Aerial Vehicle

    KAUST Repository

    Abdulaal, Mohammed

    2014-05-01

    Abstract Physical Sciences and Engineering Division Mechanical Engineering Department Master of Science Optimisation of Lagrangian Flash Flood Microsensors Dropped by Unmanned Aerial Vehicle by Mohammed Abdulaal Floods are the most common natural disasters, causing thousands of casualties every year in the world. In particular, ash ood events are particularly deadly because of the short timescales on which they occur. Classical sensing solutions such as xed wireless sensor networks or satellite imagery are either too expensive or too inaccurate. Nevertheless, Unmanned Aerial Vehicles equipped with mobile microsensors could be capable of sensing ash oods in real time for a low overall cost, saving lives and greatly improving the e ciency of the emergency response. Using ood simulation data, we show that this system could be used to detect ash oods. We also present an ongoing implementation of this system using 3D printed sensors and sensor delivery systems on a UAV testbed as well as some preliminary results.

  1. Short- and long-term temporal changes in soil concentrations of selected endocrine disrupting compounds (EDCs) following single or multiple applications of sewage sludge to pastures.

    Science.gov (United States)

    Rhind, S M; Kyle, C E; Ruffie, H; Calmettes, E; Osprey, M; Zhang, Z L; Hamilton, D; McKenzie, C

    2013-10-01

    Temporal changes in soil burdens of selected endocrine disrupting compounds were determined following application to pasture of either sewage sludge or inorganic fertilizer. Soil polycyclic aromatic hydrocarbon and polychlorinated biphenyl concentrations were not altered. Changes in concentrations of diethylhexyl phthalate (DEHP) and PBDEs 47 and 99 differed with season but concentrations remained elevated for more than three weeks after application, when grazing animals are normally excluded from pasture. It is concluded that single applications of sewage sludge can increase soil concentrations of some, but not all classes of EDCs, possibly to concentrations sufficient to exert biological effects when different chemicals act in combination, but patterns of change depend on season and soil temperature. Analysis of soil from pasture subjected to repeated sludge applications, over 13 years, provided preliminary evidence of greater increases in soil burdens of all of the EDC groups measured, including all of the PBDE congeners measured. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Short-term effects of air quality and thermal stress on non-accidental morbidity-a multivariate meta-analysis comparing indices to single measures.

    Science.gov (United States)

    Lokys, Hanna Leona; Junk, Jürgen; Krein, Andreas

    2018-01-01

    Air quality and thermal stress lead to increased morbidity and mortality. Studies on morbidity and the combined impact of air pollution and thermal stress are still rare. To analyse the correlations between air quality, thermal stress and morbidity, we used a two-stage meta-analysis approach, consisting of a Poisson regression model combined with distributed lag non-linear models (DLNMs) and a meta-analysis investigating whether latitude or the number of inhabitants significantly influence the correlations. We used air pollution, meteorological and hospital admission data from 28 administrative districts along a north-south gradient in western Germany from 2001 to 2011. We compared the performance of the single measure particulate matter (PM10) and air temperature to air quality indices (MPI and CAQI) and the biometeorological index UTCI. Based on the Akaike information criterion (AIC), it can be shown that using air quality indices instead of single measures increases the model strength. However, using the UTCI in the model does not give additional information compared to mean air temperature. Interaction between the 3-day average of air quality (max PM10, max CAQI and max MPI) and meteorology (mean air temperature and mean UTCI) did not improve the models. Using the mean air temperature, we found immediate effects of heat stress (RR 1.0013, 95% CI: 0.9983-1.0043) and by 3 days delayed effects of cold stress (RR: 1.0184, 95% CI: 1.0117-1.0252). The results for air quality differ between both air quality indices and PM10. CAQI and MPI show a delayed impact on morbidity with a maximum RR after 2 days (MPI 1.0058, 95% CI: 1.0013-1.0102; CAQI 1.0068, 95% CI: 1.0030-1.0107). Latitude was identified as a significant meta-variable, whereas the number of inhabitants was not significant in the model.

  3. Short-term effects of air quality and thermal stress on non-accidental morbidity—a multivariate meta-analysis comparing indices to single measures

    Science.gov (United States)

    Lokys, Hanna Leona; Junk, Jürgen; Krein, Andreas

    2018-01-01

    Air quality and thermal stress lead to increased morbidity and mortality. Studies on morbidity and the combined impact of air pollution and thermal stress are still rare. To analyse the correlations between air quality, thermal stress and morbidity, we used a two-stage meta-analysis approach, consisting of a Poisson regression model combined with distributed lag non-linear models (DLNMs) and a meta-analysis investigating whether latitude or the number of inhabitants significantly influence the correlations. We used air pollution, meteorological and hospital admission data from 28 administrative districts along a north-south gradient in western Germany from 2001 to 2011. We compared the performance of the single measure particulate matter (PM10) and air temperature to air quality indices (MPI and CAQI) and the biometeorological index UTCI. Based on the Akaike information criterion (AIC), it can be shown that using air quality indices instead of single measures increases the model strength. However, using the UTCI in the model does not give additional information compared to mean air temperature. Interaction between the 3-day average of air quality (max PM10, max CAQI and max MPI) and meteorology (mean air temperature and mean UTCI) did not improve the models. Using the mean air temperature, we found immediate effects of heat stress (RR 1.0013, 95% CI: 0.9983-1.0043) and by 3 days delayed effects of cold stress (RR: 1.0184, 95% CI: 1.0117-1.0252). The results for air quality differ between both air quality indices and PM10. CAQI and MPI show a delayed impact on morbidity with a maximum RR after 2 days (MPI 1.0058, 95% CI: 1.0013-1.0102; CAQI 1.0068, 95% CI: 1.0030-1.0107). Latitude was identified as a significant meta-variable, whereas the number of inhabitants was not significant in the model.

  4. Flash flood warnings for ungauged basins based on high-resolution precipitation forecasts

    Science.gov (United States)

    Demargne, Julie; Javelle, Pierre; Organde, Didier; de Saint Aubin, Céline; Janet, Bruno

    2016-04-01

    ingested as time-lagged ensembles. The time-lagged approach is a practical choice of accounting for the atmospheric forecast uncertainty when no extensive forecast archive is available for statistical modelling. The evaluation on 185 basins in the South of France showed significant improvements in terms of flash flood event detection and effective warning lead-time, compared to warnings from the current AIGA setup (without any future precipitation). Various verification metrics (e.g., Relative Mean Error, Brier Skill Score) show the skill of ensemble precipitation and flow forecasts compared to single-valued persistency benchmarks. Planned enhancements include integrating additional probabilistic NWP products (e.g., AROME precipitation ensembles on longer forecast horizon), accounting for and reducing hydrologic uncertainties from the model parameters and initial conditions via data assimilation, and developing a comprehensive observational and post-event damage database to determine decision-relevant warning thresholds for flood magnitude and probability. Javelle, P., Demargne, J., Defrance, D., Arnaud, P., 2014. Evaluating flash flood warnings at ungauged locations using post-event surveys: a case study with the AIGA warning system. Hydrological Sciences Journal, doi: 10.1080/02626667.2014.923970 Auger, L., Dupont, O., Hagelin, S., Brousseau, P., Brovelli, P., 2015. AROME-NWC: a new nowcasting tool based on an operational mesoscale forecasting system. Quarterly Journal of the Royal Meteorological Society, 141: 1603-1611, doi: 10.1002/qj.2463

  5. Machine protection for FLASH and the European XFEL

    International Nuclear Information System (INIS)

    Froehlich, Lars

    2009-05-01

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10 -8 . FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 μs. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  6. Machine protection for FLASH and the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Lars

    2009-05-15

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10{sup -8}. FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 {mu}s. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  7. Efficacy and short-term outcomes of preoperative chemoradiotherapy with intermittent oral tegafur-uracil plus leucovorin in Japanese rectal cancer patients: a single center experience retrospective analysis.

    Science.gov (United States)

    Nakagawa, Ryosuke; Inoue, Yuji; Ohki, Takeshi; Kaneko, Yuka; Maeda, Fumi; Yamamoto, Masakazu

    2017-05-31

    Various types of preoperative chemoradiotherapy (CRT) have been established for rectal cancer; thus, Physicians will need to refine the selection of appropriate preoperative CRT for different patients since there are various treatment regimens. Oral tegafur-uracil (UFT) plus leucovorin (LV) is commonly used to treat rectal cancer in Japan. Oral chemotherapy offers patients many potential advantages. Since 2008, we have been performing preoperative CRT with intermittent oral UFT plus LV in locally advanced rectal cancer patients to prevent postoperative local recurrence. Here, in a retrospective analysis, we evaluated the efficacy and short-term outcomes of preoperative CRT with intermittent oral UFT plus LV. We analyzed data from 62 patients with locally advanced rectal cancer, including 31 patients who underwent preoperative CRT between 2009 and 2013 (the CRT group) and 31 patients who were treated with surgery alone between 2001 and 2008 (the non-CRT group). Clinicopathologically, both groups included patients with rectal cancer at clinical tumor stages III-IV or clinical node stages 0-III. In the CRT group, curative operations were performed ≥8 weeks after CRT. Patients were concomitantly treated with 2 cycles of oral UFT (300 mg/m 2 /day, days 1-14 and 29-42) plus LV (75 mg/day, days 1-14 and 29-42) and 45 Gy of radiotherapy. Chemotherapy was repeated every 28 days, followed by a 2-week break. The completion rate of CRT was high at 94% (n = 29/31). The downstaging rate of CRT was 61% (n = 19/31). The pathological complete response rate was 6.5% (n = 2/31). Significant differences were observed in the 3-year local recurrence rate between the two groups (P rectal cancer. A further investigation of a diversification of preoperative CRT for Japanese rectal cancer patients is required.

  8. Enhanced skeletal muscle ribosome biogenesis, yet attenuated mTORC1 and ribosome biogenesis-related signalling, following short-term concurrent versus single-mode resistance training.

    Science.gov (United States)

    Fyfe, Jackson J; Bishop, David J; Bartlett, Jonathan D; Hanson, Erik D; Anderson, Mitchell J; Garnham, Andrew P; Stepto, Nigel K

    2018-01-12

    Combining endurance training with resistance training (RT) may attenuate skeletal muscle hypertrophic adaptation versus RT alone; however, the underlying mechanisms are unclear. We investigated changes in markers of ribosome biogenesis, a process linked with skeletal muscle hypertrophy, following concurrent training versus RT alone. Twenty-three males underwent eight weeks of RT, either performed alone (RT group, n = 8), or combined with either high-intensity interval training (HIT+RT group, n = 8), or moderate-intensity continuous training (MICT+RT group, n = 7). Muscle samples (vastus lateralis) were obtained before training, and immediately before, 1 h and 3 h after the final training session. Training-induced changes in basal expression of the 45S ribosomal RNA (rRNA) precursor (45S pre-rRNA), and 5.8S and 28S mature rRNAs, were greater with concurrent training versus RT. However, during the final training session, RT further increased both mTORC1 (p70S6K1 and rps6 phosphorylation) and 45S pre-rRNA transcription-related signalling (TIF-1A and UBF phosphorylation) versus concurrent training. These data suggest that when performed in a training-accustomed state, RT induces further increases mTORC1 and ribosome biogenesis-related signalling in human skeletal muscle versus concurrent training; however, changes in ribosome biogenesis markers were more favourable following a period of short-term concurrent training versus RT performed alone.

  9. Transcatheter closure of large atrial septal defects using 40 mm amplatzer septal occluder: Single group experience with short and intermediate term follow-up.

    Science.gov (United States)

    Dalvi, Bharat; Sheth, Kshitij; Jain, Shreepal; Pinto, Robin

    2017-05-01

    To assess feasibility, safety, and efficacy of the use of 40 mm Amplatzer septal occluder (ASO 40) for the closure of large atrial septal defects (ASD). There is very little data available on closure of large ASDs with ASO 40. Case records of patients who underwent ASD closure with ASO 40 between 2002 and 2014 were retrospectively analyzed. All patients had clinical, transthoracic, and transesophageal echocardiographic (TEE) evaluation prior to device closure. Postclosure follow-up was done at 6 weeks, 6 months, and annually thereafter. 87 patients underwent ASD closure using ASO 40 during the study period. Mean age and weight of the group was 32.4 ± 11.6 years and 59.5 ± 11.3 kg respectively. Mean ASD diameter on TEE was 32 ± 2.8 mm. The balloon stretched diameter (N = 40) was 37.8 ± 1.3 mm. The balloon assisted technique was used in 80/87 patients for device deployment. The procedure was successful in 84/87 patients. Follow-up was available in 77 patients over a period of 44 ± 15.7 months. 3/77 patients had a small residual shunt. The severity of tricuspid regurgitation decreased in 40/77 patients. The pulmonary artery systolic pressure decreased from 49.7 ± 9.2 to 41.2 ± 6.2 mm Hg (N = 61; P 40 can be used safely and effectively with promising short and intermediate term results.© 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  10. Power Production and Biochemical Markers of Metabolic Stress and Muscle Damage Following a Single Bout of Short-Sprint and Heavy Strength Exercise in Well-Trained Cyclists

    Directory of Open Access Journals (Sweden)

    Morten Kristoffersen

    2018-03-01

    Full Text Available Purpose: Although strength and sprint training are widely used methods in competitive cycling, no previous studies have compared the acute responses and recovery rates following such sessions among highly trained cyclists. The primary aim of the current study was to compare power production and biochemical markers of metabolic stress and muscle damage following a session of heavy strength (HS and short-sprint training (SS.Methods: Eleven well-trained male cyclists (18 ± 2 years with maximal oxygen uptake of 67.2 ± 5.0 mL·kg−1·min−1 completed one HS session and one SS session in a randomized order, separated by 48 h. Power production and biochemical variables were measured at baseline and at different time points during the first 45 h post exercise.Results: Lactate and human growth hormone were higher 5 min, 30 min and 1 h post the SS compared to the HS session (all p ≤ 0.019. Myoglobin was higher following the HS than the SS session 5 min, 30 min and 1 h post exercise (all p ≤ 0.005, while creatine kinase (CK was higher following the HS session 21 and 45 h post exercise (p ≤ 0.038. Counter movement jump and power production during 4 sec sprint returned to baseline levels at 23 and 47 h with no difference between the HS and SS session, whereas the delayed muscle soreness score was higher 45 h following the HS compared to the SS session (p = 0.010.Conclusion: Our findings indicate that SS training provides greater metabolic stress than HS training, whereas HS training leads to more muscle damage compared to that caused by SS training. The ability to produce power remained back to baseline already 23 h after both training sessions, indicating maintained performance levels although higher CK level and muscle soreness were present 45 h post the HS training session.

  11. Short-term results of DST EEA 33 stapler and neu@ anoscope for stapled haemorrhoidectomy: a prospective study of 1,118 patients from a single centre.

    Science.gov (United States)

    Kam, Ming Hian; Lim, Jit Fong; Ho, Kok Sun; Ooi, Boon Swee; Eu, Kong Weng

    2009-12-01

    Stapled haemorrhoidectomy has been performed with different techniques and staplers. We review our initial experience with the new DST EEA 33 stapler and neu@ anoscope. A review of all patients who underwent stapled haemorrhoidectomy using the DST EEA 33 over a 14-month period was conducted. Short-term outcomes of bleeding, pain and retention of urine requiring admission or strictures requiring surgical intervention were studied. There were 1,118 patients operated from August 2007 to October 2008. The median age was 46-year-old (20-82 years) and 51% were females. The median operating time was 15 min (range 5-45 min), and median follow-up was 7 months (range 3-16 months). There were 26 patients (2.3%) who were admitted for inability to pass urine and 20 required catheterisation. Fifty-two patients (4.6%) were admitted for post-operative bleeding. In 32 cases the bleeding stopped spontaneously, while 19 patients required adrenaline injection and packing for hemostasis. Only one patient required surgical hemostasis. Thirty-three patients (2.9%) were admitted for post-operative pain and stayed for a median of 1 day (range 1-4 days). There were 14 patients (1.2%) who developed anorectal strictures requiring surgical intervention. All underwent anoplasty at a median of 3 months post-operatively (range 2-5 months), with good result. There were no recurrent haemorrhoids during follow-up. Stapled haemorrhoidectomy using the DST EEA 33 stapler is safe. The neu@ anoscope provides good visibility and handling, and is a useful tool in this procedure.

  12. Single intradiscal injection of the interleukin-6 receptor antibody tocilizumab provides short-term relief of discogenic low back pain; prospective comparative cohort study.

    Science.gov (United States)

    Sainoh, Takeshi; Orita, Sumihisa; Miyagi, Masayuki; Inoue, Gen; Yamauchi, Kazuyo; Suzuki, Miyako; Sakuma, Yoshihiro; Kubota, Go; Oikawa, Yasuhiro; Inage, Kazuhide; Sato, Jun; Nakata, Yukio; Aoki, Yasuchika; Takahashi, Kazuhisa; Ohtori, Seiji

    2016-01-01

    Inflammatory cytokines, such as interleukin-6 and tumor necrosis factor-α, are gaining attention as important etiologic factors associated with discogenic low back pain. We conducted a prospective cohort study to evaluate the efficacy and safety of intradiscal injection of the interleukin-6 receptor antibody tocilizumab in patients with discogenic low back pain. Thirty-two consecutive patients were intradiscally injected with 2 mL of 0.5% bupivacaine (control group). Another 31 consecutive patients were intradiscally injected with 40 mg tocilizumab and 1-2 mL of 0.5% bupivacaine (tocilizumab group) at the same time. Prior to treatment, the vertebral origin of low back pain was confirmed in all patients based on pain provocation during discography and pain relief with 1 mL of 1% xylocaine. Numeric rating scale and Oswestry disability index scores were used to evaluate pain level before and after treatment between the 2 groups. The association between pain relief with tocilizumab and intervertebral disc degeneration grade was also determined. At the end of the study (8 weeks after treatment), 30 patients in each group were evaluable. In the tocilizumab group, numeric rating scale and Oswestry disability index scores improved significantly at 2 and 4 weeks after treatment, respectively. Intervertebral disc degeneration was not associated with improvement of numeric rating scale score in the tocilizumab group. Local infection (i.e., discitis) was observed in 1 patient in the tocilizumab group. The results demonstrate the clinical relevance of interleukin-6 in discogenic low back pain. Intradiscal tocilizumab injection was shown to exert a short-term analgesic effect in patients with discogenic low back pain. Further research is required to determine the long-term effects of intradiscal tocilizumab therapy in patients with discogenic low back pain. Copyright © 2015 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

  13. Prototype Web-based continuing medical education using FlashPix images.

    Science.gov (United States)

    Landman, A; Yagi, Y; Gilbertson, J; Dawson, R; Marchevsky, A; Becich, M J

    2000-01-01

    Continuing Medical Education (CME) is a requirement among practicing physicians to promote continuous enhancement of clinical knowledge to reflect new developments in medical care. Previous research has harnessed the Web to disseminate complete pathology CME case studies including history, images, diagnoses, and discussions to the medical community. Users submit real-time diagnoses and receive instantaneous feedback, eliminating the need for hard copies of case material and case evaluation forms. This project extends the Web-based CME paradigm with the incorporation of multi-resolution FlashPix images and an intuitive, interactive user interface. The FlashPix file format combines a high-resolution version of an image with a hierarchy of several lower resolution copies, providing real-time magnification via a single image file. The Web interface was designed specifically to simulate microscopic analysis, using the latest Javascript, Java and Common Gateway Interface tools. As the project progresses to the evaluation stage, it is hoped that this active learning format will provide a practical and efficacious environment for continuing medical education with additional application potential in classroom demonstrations, proficiency testing, and telepathology. Using Microsoft Internet Explorer 4.0 and above, the working prototype Web-based CME environment is accessible at http://telepathology.upmc.edu/WebInterface/NewInterface/welcome.html.

  14. Menopausal Hot Flashes and Carotid Intima Media Thickness Among Midlife Women.

    Science.gov (United States)

    Thurston, Rebecca C; Chang, Yuefang; Barinas-Mitchell, Emma; Jennings, J Richard; Landsittel, Doug P; Santoro, Nanette; von Känel, Roland; Matthews, Karen A

    2016-12-01

    There has been a longstanding interest in the role of menopause and its correlates in the development of cardiovascular disease (CVD) in women. Menopausal hot flashes are experienced by most midlife women; emerging data link hot flashes to CVD risk indicators. We tested whether hot flashes, measured via state-of-the-art physiologic methods, were associated with greater subclinical atherosclerosis as assessed by carotid ultrasound. We considered the role of CVD risk factors and estradiol concentrations in these associations. A total of 295 nonsmoking women free of clinical CVD underwent ambulatory physiologic hot flash assessments; a blood draw; and carotid ultrasound measurement of intima media thickness and plaque. Associations between hot flashes and subclinical atherosclerosis were tested in regression models controlling for CVD risk factors and estradiol. More frequent physiologic hot flashes were associated with higher carotid intima media thickness (for each additional hot flash: β [SE]=0.004 [0.001]; P=0.0001; reported hot flash: β [SE]=0.008 [0.002]; P=0.002, multivariable) and plaque (eg, for each additional hot flash, odds ratio [95% confidence interval] plaque index ≥2=1.07 [1.003-1.14]; P=0.04, relative to no plaque, multivariable] among women reporting daily hot flashes; associations were not accounted for by CVD risk factors or by estradiol. Among women reporting hot flashes, hot flashes accounted for more variance in intima media thickness than most CVD risk factors. Among women reporting daily hot flashes, frequent hot flashes may provide information about a woman's vascular status beyond standard CVD risk factors and estradiol. Frequent hot flashes may mark a vulnerable vascular phenotype among midlife women. © 2016 American Heart Association, Inc.

  15. Spatial-temporal characteristics of lightning flash size in a supercell storm

    Science.gov (United States)

    Zhang, Zhixiao; Zheng, Dong; Zhang, Yijun; Lu, Gaopeng

    2017-11-01

    The flash sizes of a supercell storm, in New Mexico on October 5, 2004, are studied using the observations from the New Mexico Lightning Mapping Array and the Albuquerque, New Mexico, Doppler radar (KABX). First, during the temporal evolution of the supercell, the mean flash size is anti-correlated with the flash rate, following a unary power function, with a correlation coefficient of - 0.87. In addition, the mean flash size is linearly correlated with the area of reflectivity > 30 dBZ at 5 km normalized by the flash rate, with a correlation coefficient of 0.88. Second, in the horizontal, flash size increases along the direction from the region near the convection zone to the adjacent forward anvil. The region of minimum flash size usually corresponds to the region of maximum flash initiation and extent density. The horizontal correspondence between the mean flash size and the flash extent density can also be fitted by a unary power function, and the correlation coefficient is > 0.5 in 50% of the radar volume scans. Furthermore, the quality of fit is positively correlated to the convective intensity. Third, in the vertical direction, the height of the maximum flash initiation density is close to the height of maximum flash extent density, but corresponds to the height where the mean flash size is relatively small. In the discussion, the distribution of the small and dense charge regions when and where convection is vigorous in the storm, is deduced to be responsible for the relationship that flash size is temporally and spatially anti-correlated with flash rate and density, and the convective intensity.

  16. Comparison of perinatal outcomes between long-term and short-term use of tocolytic agent: a historical cohort study in a single perinatal hospital.

    Science.gov (United States)

    Nakamura, Masamitsu; Hasegawa, Junichi; Arakaki, Tatsuya; Hamada, Shoko; Takita, Hiroko; Oba, Tomohiro; Koide, Keiko; Matsuoka, Ryu; Sekizawa, Akihiko

    2016-12-01

    The aim of this study was to evaluate the effect of long-term use of tocolytic agents to prevent preterm delivery and improve perinatal outcome. A historical cohort study was performed in a single perinatal center. The maternal characteristics, frequency of preterm labor and prescribed dose of tocolytic agents were compared before and after changing the management protocol for threatened premature delivery. A total of 1548 deliveries were carried out before changing the protocol for the use of tocolytic agents for threatened premature delivery and 1444 deliveries afterwards. There was no significant difference in the maternal characteristics before and after the revision except for maternal age. The total number of ritodrine hydrochloride ampules used was reduced from 4654 to 514, and the total vials of magnesium sulfate used were reduced from 1574 to 193, but perinatal outcomes, such as rate of preterm birth, neonatal weight, and rate of NICU hospitalization were not different between the groups. There was no significant change in the frequency of preterm delivery before and after changing of the protocol for threatened premature delivery. Because a decrease in the given dose of tocolytic agents did not affect the timing of delivery and neonatal outcomes, long-term tocolysis in patients with threatened premature delivery should be restricted to prevent maternal and fetal adverse side-effects. © 2016 Japan Society of Obstetrics and Gynecology.

  17. Laparoscopic single-anastomosis duodenal-jejunal bypass with sleeve gastrectomy (SADJB-SG): short-term result and comparison with gastric bypass.

    Science.gov (United States)

    Lee, Wei-Jei; Lee, Kuo-Ting; Kasama, Kazunori; Seiki, Yosuke; Ser, Kong-Han; Chun, Shu-Chun; Chen, Jung-Chien; Lee, Yi-Chih

    2014-01-01

    Laparoscopic duodeno-jejunal bypass with sleeve gastrectomy (DJB-SG) has been introduced as a novel metabolic surgery from Asia recently. It provides benefits of avoiding the risk of remnant gastric cancer, minimization of malnutrition from duodenal switch. Here, we introduce the technique of single-loop anastomosis duodeno-jejunal bypass with sleeve gastrectomy (SADJB-SG) and compare with other gastric bypass surgeries. Fifty morbid obese patients underwent our novel procedure, laparoscopic SADJB-S from 2011 to 2013. Operative complication, weight loss, and diabetes remission were followed. All procedures were completed laparoscopically. The mean operative time was 181.7 ± 38.4 min, and the mean hospital stay was 3.8 days. Three minor early complications (6 %) were encountered but no major complication was noted. There was no significant difference in perioperative parameters between the SADJB-SG and gastric bypass except a longer operation time. The mean BMI decreased from 38.4 to 25.4 at 1 year after surgery with a mean weight loss of 32.7 % which is higher than gastric bypass. Laparoscopic SADJB-SG appears to be an ideal metabolic/bariatric surgery, whereas the efficacy is non-inferior to gastric bypass.

  18. Cosmic X-ray Flashes Reveal Their Distance

    Science.gov (United States)

    2003-09-01

    Astronomers using X-ray, radio, and optical telescopes have announced a big leap in solving the origin of mysterious objects known as X-ray flashes (XRFs) by finding that they originate from blue star forming galaxies. This discovery of the cosmic distance scale effectively ends the widely-held speculation that XRFs are the death-cries from stars exploding in the infant universe. X-ray flashes resemble a lower energy and longer-duration version of a gamma-ray burst, an energetic explosion thought to signal the death of a massive star. The properties of XRFs led to speculation that they were gamma-ray bursts that occurred less than a few billion years after the Big Bang, and whose light had been subsequently weakened and time-stretched by the expansion of the universe. "Now that the very distant origin has been ruled out, X-ray flashes could be due to exploding massive stars, just like gamma-ray bursts" explained Dr. Joshua Bloom at the Harvard-Smithsonian Center for Astrophysics in Cambridge, Mass., lead author on the paper announcing the results to be published in The Astrophysical Journal. Bloom continued: "But the explosion from an X-ray flash would need to contain less matter or less energy than a typical gamma-ray burst. Alternatively, X-ray flashes could be gamma-ray bursts viewed off-axis." These results are being discussed at the "30th Anniversary of the Discovery of Gamma-ray Bursts" conference currently being held in Sante Fe, New Mexico. The location of the sources studied by Bloom's group required a careful coordination of NASA's Chandra X-ray Observatory and Hubble Space Telescope, along with the National Radio Astronomy Observatory's Very Large Array (VLA) in Socorro, New Mexico. Chandra and the VLA provided a precise location of the fading X-ray and radio "afterglow" of two X-ray flashes known as XRF 011030 and XRF 020427. The Hubble Space Telescope was used to identify and study galaxies at these locations and estimate their distances to between

  19. Randomized Trial of a Hypnosis Intervention for Treatment of Hot Flashes Among Breast Cancer Survivors

    Science.gov (United States)

    Elkins, Gary; Marcus, Joel; Stearns, Vered; Perfect, Michelle; Rajab, M. Hasan; Ruud, Christopher; Palamara, Lynne; Keith, Timothy

    2008-01-01

    Purpose Hot flashes are a significant problem for many breast cancer survivors. Hot flashes can cause discomfort, disrupted sleep, anxiety, and decreased quality of life. A well-tolerated and effective mind-body treatment for hot flashes would be of great value. On the basis of previous case studies, this study was developed to evaluate the effect of a hypnosis intervention for hot flashes. Patients and Methods Sixty female breast cancer survivors with hot flashes were randomly assigned to receive hypnosis intervention (five weekly sessions) or no treatment. Eligible patients had to have a history of primary breast cancer without evidence of detectable disease and 14 or more weekly hot flashes for at least 1 month. The major outcome measure was a bivariate construct that represented hot flash frequency and hot flash score, which was analyzed by a classic sums and differences comparison. Secondary outcome measures were self-reports of interference of hot flashes on daily activities. Results Fifty-one randomly assigned women completed the study. By the end of the treatment period, hot flash scores (frequency × average severity) decreased 68% from baseline to end point in the hypnosis arm (P hypnosis intervention (P Hypnosis appears to reduce perceived hot flashes in breast cancer survivors and may have additional benefits such as reduced anxiety and depression, and improved sleep. PMID:18809612

  20. Evaluating a flash size and energy dissipation relationship through various modeling techniques

    Science.gov (United States)

    Salinas, V.; Brothers, M.; Bruning, E. C.; Mansell, E.

    2017-12-01

    Many studies have investigated the influence of the electrostatic and kinematic environments of thunderstorms on lightning flash size. Recent work has demonstrated a coupling of turbulent kinematic properties to flash size distribution in different regions of a storm. Additional work has also theorized a relationship of flash size and energy to the TKE spectrum. However, the physical basis for using flash size alone in these estimates remains absent. This study used the National Severe Storms Laboratory's Collaborative Model for Multiscale Atmospheric Simulation model (N-COMMAS) to simulate an observed multicellular thunderstorm to investigate the relationship between flash size and energy. Model output included the total energy dissipated for each flash, and the charge, electric potential, electric field where it propagated. These flashes were then modeled in two simplified ways. First, each flash was assumed to be convex hull volumes of charge. A 3D Poisson solver was then used on each charge volume for charge density retrieval and computation of the electric potential, using a theoretical electric field breakeven threshold and charge conservation. Second, a capacitor model was used to estimate the energy dissipated using flash area, charge, and plate spacing obtained from the COMMAS model. These two calculations of flash energy were compared to the COMMAS energy. The results suggested that flash size alone was insufficient in characterizing the energetic properties.

  1. Flash memory management system and method utilizing multiple block list windows

    Science.gov (United States)

    Chow, James (Inventor); Gender, Thomas K. (Inventor)

    2005-01-01

    The present invention provides a flash memory management system and method with increased performance. The flash memory management system provides the ability to efficiently manage and allocate flash memory use in a way that improves reliability and longevity, while maintaining good performance levels. The flash memory management system includes a free block mechanism, a disk maintenance mechanism, and a bad block detection mechanism. The free block mechanism provides efficient sorting of free blocks to facilitate selecting low use blocks for writing. The disk maintenance mechanism provides for the ability to efficiently clean flash memory blocks during processor idle times. The bad block detection mechanism provides the ability to better detect when a block of flash memory is likely to go bad. The flash status mechanism stores information in fast access memory that describes the content and status of the data in the flash disk. The new bank detection mechanism provides the ability to automatically detect when new banks of flash memory are added to the system. Together, these mechanisms provide a flash memory management system that can improve the operational efficiency of systems that utilize flash memory.

  2. Adobe Flash as a medium for online experimentation: a test of reaction time measurement capabilities.

    Science.gov (United States)

    Reimers, Stian; Stewart, Neil

    2007-08-01

    Adobe Flash can be used to run complex psychological experiments over the Web. We examined the reliability of using Flash to measure reaction times (RTs) using a simple binary-choice task implemented both in Flash and in a Linux-based system known to record RTs with millisecond accuracy. Twenty-four participants were tested in the laboratory using both implementations; they also completed the Flash version on computers of their own choice outside the lab. RTs from the trials run on Flash outside the lab were approximately 20 msec slower than those from trials run on Flash in the lab, which in turn were approximately 10 msec slower than RTs from the trials run on the Linux-based system (baseline condition). RT SDs were similar in all conditions, suggesting that although Flash may overestimate RTs slightly, it does not appear to add significant noise to the data recorded.

  3. Opacplot2: Enabling tabulated EoS and opacity compatibility for HEDLP simulations with the FLASH code

    Science.gov (United States)

    Laune, Jordan; Tzeferacos, Petros; Feister, Scott; Fatenejad, Milad; Yurchak, Roman; Flocke, Norbert; Weide, Klaus; Lamb, Donald

    2017-10-01

    Thermodynamic and opacity properties of materials are necessary to accurately simulate laser-driven laboratory experiments. Such data are compiled in tabular format since the thermodynamic range that needs to be covered cannot be described with one single theoretical model. Moreover, tabulated data can be made available prior to runtime, reducing both compute cost and code complexity. This approach is employed by the FLASH code. Equation of state (EoS) and opacity data comes in various formats, matrix-layouts, and file-structures. We discuss recent developments on opacplot2, an open-source Python module that manipulates tabulated EoS and opacity data. We present software that builds upon opacplot2 and enables easy-to-use conversion of different table formats into the IONMIX format, the native tabular input used by FLASH. Our work enables FLASH users to take advantage of a wider range of accurate EoS and opacity tables in simulating HELP experiments at the National Laser User Facilities.

  4. [Optimization of flash-type extraction technology of alisol B 23-acetate from Alismatis Rhizoma by response surface methodology].

    Science.gov (United States)

    Wei, Ying-Chun; Yan, Ming; Yang, Jing; Liu, Jun-Chao; Yin, Hong-Mei; Wu, Yun; Sun, Yong-Cheng; Xiao, Wei

    2016-02-01

    Response surface methodology was used to optimize and obtain the optimal flash-type extraction technology of alisol B 23-acetate from Alismatis Rhizoma. With the extraction rate of alisol B 23-acetate as an indicator, single-factor test was used to investigate the effect of ethanol volume fraction, liquid-solid ratio, extraction times and extracting time on the extraction rate of alisol B 23-acetate.The results were combined with Box-Benhnken design and response surface analysis to optimize the technology parameters for extraction process of Alismatis Rhizoma and obtain the optimal flash-type extraction technology under the following conditions: ethanol volume fraction 80%, liquid-solid ratio 12∶1, extraction 4 times, 114 s/time. Flash-type extraction technology of alisol B 23-acetate by response surface methodology is stable, time-saving, efficient, and with the advantages of room temperature extraction and no component damage, so it can be used for massive production. Copyright© by the Chinese Pharmaceutical Association.

  5. Simultaneous multi-slice MRI using cartesian and radial FLASH and regularized nonlinear inversion: SMS-NLINV.

    Science.gov (United States)

    Rosenzweig, Sebastian; Holme, Hans Christian Martin; Wilke, Robin N; Voit, Dirk; Frahm, Jens; Uecker, Martin

    2018-04-01

    The development of a calibrationless parallel imaging method for accelerated simultaneous multi-slice (SMS) MRI based on Regularized Nonlinear Inversion (NLINV), evaluated using Cartesian and radial fast low-angle shot (FLASH). NLINV is a parallel imaging method that jointly estimates image content and coil sensitivities using a Newton-type method with regularization. Here, NLINV is extended to SMS-NLINV for reconstruction and separation of all simultaneously acquired slices. The performance of the extended method is evaluated for different sampling schemes using phantom and in vivo experiments based on Cartesian and radial SMS-FLASH sequences. The basic algorithm was validated in Cartesian experiments by comparison with ESPIRiT. For Cartesian and radial sampling, improved results are demonstrated compared to single-slice experiments, and it is further shown that sampling schemes using complementary samples outperform schemes with the same samples in each partition. The extension of the NLINV algorithm for SMS data was implemented and successfully demonstrated in combination with a Cartesian and radial SMS-FLASH sequence. Magn Reson Med 79:2057-2066, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

  6. Short stature

    Science.gov (United States)

    ... as her parents. Providers call this "constitutional growth delay." If one or both parents are short, your ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  7. SHORT COMMUNICATION

    African Journals Online (AJOL)

    PROF P.T. KAYE

    . SHORT COMMUNICATION. Formation and Structural Analysis of Novel Dibornyl Ethers. Perry T. Kaye*, Andrew R. Duggan, Joseph M. Matjila, Warner E. Molema, and. Swarnam S. Ravindran. Department of Chemistry, Rhodes University, Grahamstown, ...

  8. Ultra-bright γ-ray flashes and dense attosecond positron bunches from two counter-propagating laser pulses irradiating a micro-wire target.

    Science.gov (United States)

    Li, Han-Zhen; Yu, Tong-Pu; Hu, Li-Xiang; Yin, Yan; Zou, De-Bin; Liu, Jian-Xun; Wang, Wei-Quan; Hu, Shun; Shao, Fu-Qiu

    2017-09-04

    We propose a novel scheme to generate ultra-bright ultra-short γ-ray flashes and high-energy-density attosecond positron bunches by using multi-dimensional particle-in-cell simulations with quantum electrodynamics effects incorporated. By irradiating a 10 PW laser pulse with an intensity of 10 23 W/cm 2 onto a micro-wire target, surface electrons are dragged-out of the micro-wire and are effectively accelerated to several GeV energies by the laser ponderomotive force, forming relativistic attosecond electron bunches. When these electrons interact with the probe pulse from the other side, ultra-short γ-ray flashes are emitted with an ultra-high peak brightness of 1.8 × 10 24 photons s -1 mm -2 mrad -2 per 0.1%BW at 24 MeV. These photons propagate with a low divergence and collide with the probe pulse, triggering the Breit-Wheeler process. Dense attosecond e - e + pair bunches are produced with the positron energy density as high as 10 17 J/m 3 and number of 10 9 . Such ultra-bright ultra-short γ-ray flashes and secondary positron beams may have potential applications in fundamental physics, high-energy-density physics, applied science and laboratory astrophysics.

  9. Light-responsive organic flashing electron ratchet.

    Science.gov (United States)

    Kedem, Ofer; Lau, Bryan; Ratner, Mark A; Weiss, Emily A

    2017-08-15

    Ratchets are nonequilibrium devices that produce directional motion of particles from nondirectional forces without using a bias, and are responsible for many types of biological transport, which occur with high yield despite strongly damped and noisy environments. Ratchets operate by breaking time-reversal and spatial symmetries in the direction of transport through application of a time-dependent potential with repeating, asymmetric features. This work demonstrates the ratcheting of electrons within a highly scattering organic bulk-heterojunction layer, and within a device architecture that enables the application of arbitrarily shaped oscillating electric potentials. Light is used to modulate the carrier density, which modifies the current with a nonmonotonic response predicted by theory. This system is driven with a single unbiased sine wave source, enabling the future use of natural oscillation sources such as electromagnetic radiation.

  10. Anterior corpectomy via the mini-open, extreme lateral, transpsoas approach combined with short-segment posterior fixation for single-level traumatic lumbar burst fractures: analysis of health-related quality of life outcomes and patient satisfaction.

    Science.gov (United States)

    Theologis, Alexander A; Tabaraee, Ehsan; Toogood, Paul; Kennedy, Abbey; Birk, Harjus; McClellan, R Trigg; Pekmezci, Murat

    2016-01-01

    .4%) and mental health outcomes (SF-12 mental component score 50.2% ± 11.6%) after surgery. Anterior corpectomy and cage placement via a mini-open, extreme lateral, transpsoas approach supplemented by short-segment posterior instrumentation is a safe, effective alternative to conventional approaches in the treatment of single-level unstable burst fractures and is associated with excellent functional outcomes and patient satisfaction.

  11. Opportunities and challenges for photon diagnostics at the soft X-ray FEL FLASH in simultaneous operation mode (Conference Presentation)

    Science.gov (United States)

    Kuhlmann, Marion; Treusch, Rolf; Plönjes-Palm, Elke; Faatz, Bart; Tiedtke, Kai; Braune, Markus; Keitel, Barbara

    2017-06-01

    FLASH operates two distinguished undulator sections driven by one linear accelerator. In the 11th year of user operation the grown demands for detailed photon beam performances are doubled approached. The more complex machine settings and setup times require a more and more efficient determination of its characteristics concerning electron- and photon-beams. The photon diagnostics systems, e.g. gas monitor detection, photon-ion spectroscopy, or diffractive tools, not only have to deal on a regular basis with fundamental wavelengths between 4nm and 90nm, also they have to be reliable from 1µJ up to 1mJ of average single pulse energy. For the success of the experiments the error bars of many diagnostics measurements need to be pushed into their current limits and developments to go further are always issued. Especial, the pulse duration in conjunction with the spectral width has been accessed in the last year. Direct approaches of fundamental wavelengths below the Nitrogene K-edge and higher harmonics in and below the water window were achieved. While in principal distinguished to each other, the photon diagnostics tools of FLASH1 and FLASH2 add-up to a more complete understanding of the other. Together they allow for a better perspective towards further developments and a more suitable use of beam times. The intermingled knowledge of electron- and photon-beams is essential for an FEL particular in simultaneous operation mode. Examples out of regular user operation and distinguished FEL-studies are given to illustrate the current state of the photon diagnostics at FLASH.

  12. Flash Flood Risk Perception in an Italian Alpine Region. From Research into Adaptive Strategies.

    Science.gov (United States)

    Scolobig, A.; de Marchi, B.; Borga, M.

    2009-04-01

    Flash floods are characterised by short lead times and high levels of uncertainty. Adaptive strategies to face them need to take into account not only the physical characteristics of the hydro-geological phenomena, but also peoples' risk perceptions, attitudes and behaviours in case of an emergency. It is quite obvious that a precondition for an effective adaptation, e.g. in the case of a warning, is the awareness of being endangered. At the same time the perceptions of those at risk and their likely actions inform hazard warning strategies and recovery programmes following such events. Usually low risk awareness or "wrong perceptions" of the residents are considered among the causes of an inadequate preparedness or response to flash floods as well as a symptom of a scarce self-protection culture. In this paper we will focus on flood risk perception and on how research on this topic may contribute to design adaptive strategies and give inputs to flood policy decisions. We will report on a flood risk perception study of the population residing in four villages in an Italian Alpine Region (Trentino Alto-Adige), carried out between October 2005 and January 2006. A total of 400 standardised questionnaires were submitted to local residents by face to face interviews. The surveys were preceded by focus groups with officers from agencies in charge of flood risk management and semi-structured and in-depth interviews with policy, scientific and technical experts. Survey results indicated that people are not so worried about hydro-geological phenomena, and think that their community is more endangered than themselves. The knowledge of the territory and danger sources, the unpredictability of flash floods and the feeling of safety induced by structural devices are the main elements which make the difference in shaping residents' perceptions. The study also demonstrated a widespread lack of adoption of preparatory measures among residents, together with a general low

  13. Measurement and analysis of coherent synchrotron radiation effects at FLASH

    International Nuclear Information System (INIS)

    Beutner, B.

    2007-12-01

    The vacuum-ultra-violet Free Electron Laser in Hamburg (FLASH) is a linac driven SASE-FEL. High peak currents are produced using magnetic bunch compression chicanes. In these magnetic chicanes, the energy distribution along an electron bunch is changed by eff ects of Coherent Synchrotron Radiation (CSR). Energy changes in dispersive bunch compressor chicanes lead to transverse displacements along the bunch. These CSR induced displacements are studied using a transverse deflecting RF-structure. Experiments and simulations concerning the charge dependence of such transverse displacements are presented and analysed. In these experiments an over-compression scheme is used which reduces the peak current downstream the bunch compressor chicanes. Therefore other self interactions like space charge forces which might complicate the measurements are suppressed. Numerical simulations are used to analyse the beam dynamics under the influence of CSR forces. The results of these numerical simulations are compared with the data obtained in the over-compression experiments at FLASH. (orig.)

  14. Measurement and analysis of coherent synchrotron radiation effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Beutner, B.

    2007-12-15

    The vacuum-ultra-violet Free Electron Laser in Hamburg (FLASH) is a linac driven SASE-FEL. High peak currents are produced using magnetic bunch compression chicanes. In these magnetic chicanes, the energy distribution along an electron bunch is changed by eff ects of Coherent Synchrotron Radiation (CSR). Energy changes in dispersive bunch compressor chicanes lead to transverse displacements along the bunch. These CSR induced displacements are studied using a transverse deflecting RF-structure. Experiments and simulations concerning the charge dependence of such transverse displacements are presented and analysed. In these experiments an over-compression scheme is used which reduces the peak current downstream the bunch compressor chicanes. Therefore other self interactions like space charge forces which might complicate the measurements are suppressed. Numerical simulations are used to analyse the beam dynamics under the influence of CSR forces. The results of these numerical simulations are compared with the data obtained in the over-compression experiments at FLASH. (orig.)

  15. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work......Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  16. Total Lightning Flash Activity Response to Aerosol over China Area

    Directory of Open Access Journals (Sweden)

    Pengguo Zhao

    2017-01-01

    Full Text Available Twelve years of measurements of aerosol optical depth (AOD, cloud fraction, cloud top height, ice cloud optical thickness and lightning flash density from 2001 to 2012 have been analyzed to investigate the effect of aerosols on electrical activity over an area of China. The results show that increasing aerosol loading inspires the convective intensity, and then increases the lightning flash density. The spatial distribution of the correlation between aerosol loading and electrical activity shows a remarkable regional difference over China. The high-correlation regions embody the positive aerosol microphysical effect on the intensity of the electrical activity, while the large-scale processes may play the main role in convection development and producing lightning in low-correlation regions.

  17. Biodiesel Production by Reactive Flash: A Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Alejandro Regalado-Méndez

    2016-01-01

    Full Text Available Reactive flash (RF in biodiesel production has been studied in order to investigate steady-state multiplicities, singularities, and effect of biodiesel quality when the RF system approaches to bubble point. The RF was modeled by an index-2 system of differential algebraic equations, the vapor split (ϕ was computed by modified Rachford-Rice equation and modified Raoult’s law computed bubble point, and the continuation analysis was tracked on MATCONT. Results of this study show the existence of turning points, leading to a unique bubble point manifold, (xBiodiesel,T=(0.46,478.41 K, which is a globally stable flashing operation. Also, the results of the simulation in MATLAB® of the dynamic behavior of the RF show that conversion of triglycerides reaches 97% for a residence time of 5.8 minutes and a methanol to triglyceride molar flow ratio of 5 : 1.

  18. Visualizing Library Statistics using Open Flash Chart 2 and Drupal

    Directory of Open Access Journals (Sweden)

    Laura K. Wiegand

    2013-01-01

    Full Text Available Libraries continue to need to demonstrate their value to stakeholders, and while statistics alone do not represent value, they are an important element. We found ourselves, and our stakeholders, uninspired by our infrequently updated bulleted list of statistics on our website and so set out to create a more dynamic and visually appealing look at our statistics. This article outlines how we used our content management system, Drupal, Open Flash Chart and custom programming to convert library statistics into Flash charts, including how to populate the graphs with dynamic data from external sources. The end result is our Library Statistics Dashboard (http://library.uncw.edu/facts_planning/dashboard that visually demonstrates the use, activity and resources in the library via interactive and visually interesting graphs.

  19. Time-resolved C-arm cone beam CT angiography (TR-CBCTA) imaging from a single short-scan C-arm cone beam CT acquisition with intra-arterial contrast injection

    Science.gov (United States)

    Li, Yinsheng; Garrett, John W.; Li, Ke; Wu, Yijing; Johnson, Kevin; Schafer, Sebastian; Strother, Charles; Chen, Guang-Hong

    2018-04-01

    Time-resolved C-arm cone-beam CT (CBCT) angiography (TR-CBCTA) images can be generated from a series of CBCT acquisitions that satisfy data sufficiency condition in analytical image reconstruction theory. In this work, a new technique was developed to generate TR-CBCTA images from a single short-scan CBCT data acquisition with contrast media injection. The reconstruction technique enabling this application is a previously developed image reconstruction technique, synchronized multi-artifact reduction with tomographic reconstruction (SMART-RECON). In this new application, the acquired short-scan CBCT projection data were sorted into a union of several sub-sectors of view angles and each sub-sector of view angles corresponds to an individual image volume to be reconstructed. The SMART-RECON method was then used to jointly reconstruct all of these individual image volumes under two constraints: (1) each individual image volume is maximally consistent with the measured cone-beam projection data within the corresponding view angle sector and (2) the nuclear norm of the image matrix is minimized. The difference between these reconstructed individual image volumes is used to generated the desired subtracted angiograms. To validate the technique, numerical simulation data generated from a fractal tree angiogram phantom were used to quantitatively study the accuracy of the proposed method and retrospective in vivo human subject studies were used to demonstrate the feasibility of generating TR-CBCTA in clinical practice.

  20. Temporal characterization of the wave-breaking flash in a laser plasma accelerator

    Science.gov (United States)

    Miao, Bo; Feder, Linus; Goers, Andrew; Hine, George; Salehi, Fatholah; Wahlstrand, Jared; Woodbury, Daniel; Milchberg, Howard

    2017-10-01

    Wave-breaking injection of electrons into a relativistic plasma wake generated in near-critical density plasma by sub-terawatt laser pulses generates an intense ( 1 μJ) and ultra-broadband (Δλ 300 nm) radiation flash. In this work we demonstrate the spectral coherence of this radiation and measure its temporal width using single-shot supercontinuum spectral interferometry (SSSI). The measured temporal width is limited by measurement resolution to 50 fs. Spectral coherence is corroborated by PIC simulations which show that the spatial extent of the acceleration trajectory at the trapping region is small compared to the radiation center wavelength. To our knowledge, this is the first temporal and coherence characterization of wave-breaking radiation. This work is supported by the US Department of Energy, the National Science Foundation, and the Air Force Office of Scientific Research.

  1. Fatigue Failure of a Flash Butt Welded Rail

    OpenAIRE

    Godefroid, L.B.; Faria, G.L.; Cândido, L.C.; Viana, T.G.

    2014-01-01

    Medium carbon steel rails are commonly jointed by means of a flash butt welding procedure. To ensure an adequate service life for the structural component commonly subjected to fatigue loading, a rigorous quality control should be performed, both in welding parameters and in the surface quality of the welded joint. This work investigated the cause of a recurrent failure in a railway, with cracking always initiated in the rail in the region of the welded joint. All standard procedures of failu...

  2. Flash-x-radiography for fuel motion studies

    International Nuclear Information System (INIS)

    Choate, L.M.; Halbleib, J.A. Sr.; Posey, L.D.

    1976-01-01

    The paper is primarily intended to be a status report on recent activities in the Flash X-ray Radiography/Cinematography area. Studies in the area of source definition as well as associated experimental limitations are discussed. The implications of machine current upon precision uncertainty in measurements of changes in areal density are presented. The radiographic techniques presently being evaluated are discussed. Performance estimates representative of this type of diagnostic tool are presented. Comparison with other results is made

  3. Flash flood swift water rescues, Texas, 2005–2014

    Directory of Open Access Journals (Sweden)

    Vaidehi Shah

    2017-01-01

    Full Text Available Although rainfall patterns are complex and difficult to predict, climate models suggest precipitation in Texas will occur less frequently and with greater intensity in the future. In combination with rapid population growth and development, extreme rainfall events are likely to lead to flash floods and necessitate swift water rescues. Swift water rescues are used to retrieve person(s from swift water flowing at a rate of 1 knot or greater. Data were obtained from the Texas Fire Marshal’s Office and analyzed to describe spatial and temporal characteristics of rescues. Between 2005 and 2014, 3256 swift water rescues were reported from 136 of 254 (54% counties. Over half (54.6%, n = 1777 occurred in counties known as Flash Flood Alley, which includes Texas’ largest and fastest growing cities. Less than 1.0% (n = 18 were reported from 49 counties designated as completely rural, or with an urban population less than 2500. Increases in swift water rescues were seen between March and September and during major weather events such as tropical storms. Because county-level data was utilized and demographic data was missing in all but 2% (n = 47 of the incidents, our ability to identify populations at risk or target interventions in the future using this data is limited. Despite the frequency of flash flood events and swift water rescues in Texas, knowledge gaps persist that should be addressed through the conduct of interdisciplinary research by epidemiologists and climatologists and by disseminating evidence-based health education and safety programs, particularly in rapidly growing counties that make up Texas’ Flash Flood Alley.

  4. The Role of Serotonin in Hot Flashes after Breast Cancer

    Science.gov (United States)

    2009-03-01

    not clear whether benefits are due to physiological effects on hot flashes or due to improvements in mood or other related symptoms. In addition...flavorings were most palatable - chocolate mint and orange. We rejected a lemon flavoring as being unpalatable. We eliminated the mid-day snack per...glucose tablets. Mood was not significantly impacted. Hamilton Rating Scale-Depression scores remained < 18 at all time points and for both study

  5. Characterization of carbon nanolayers flash evaporated on PET and PTFE

    Czech Academy of Sciences Publication Activity Database

    Švorčík, V.; Hubička, T.; Slepička, P.; Siegel, J.; Kolská, Z.; Bláhová, O.; Macková, Anna; Hnatowicz, Vladimír

    2009-01-01

    Roč. 47, č. 7 (2009), s. 1770-1778 ISSN 0008-6223 R&D Projects: GA MŠk(CZ) LC06041; GA ČR GA106/09/0125 Institutional research plan: CEZ:AV0Z10480505 Keywords : carbon nano-layers * flash evaporation * PET Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 4.504, year: 2009

  6. On the Mechanism of Microwave Flash Sintering of Ceramics

    Directory of Open Access Journals (Sweden)

    Yury V. Bykov

    2016-08-01

    Full Text Available The results of a study of ultra-rapid (flash sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10–500 W/cm3 are presented. Ceramic samples of various compositions—Al2O3; Y2O3; MgAl2O4; and Yb(LaO2O3—were sintered using a 24 GHz gyrotron system to a density above 0.98–0.99 of the theoretical value in 0.5–5 min without isothermal hold. An analysis of the experimental data (microwave power; heating and cooling rates along with microstructure characterization provided an insight into the mechanism of flash sintering. Flash sintering occurs when the processing conditions—including the temperature of the sample; the properties of thermal insulation; and the intensity of microwave radiation—facilitate the development of thermal runaway due to an Arrhenius-type dependency of the material’s effective conductivity on temperature. The proper control over the thermal runaway effect is provided by fast regulation of the microwave power. The elevated concentration of defects and impurities in the boundary regions of the grains leads to localized preferential absorption of microwave radiation and results in grain boundary softening/pre-melting. The rapid densification of the granular medium with a reduced viscosity of the grain boundary phase occurs via rotation and sliding of the grains which accommodate their shape due to fast diffusion mass transport through the (quasi-liquid phase. The same mechanism based on a thermal runaway under volumetric heating can be relevant for the effect of flash sintering of various oxide ceramics under a dc/ac voltage applied to the sample.

  7. Monitoring of the process of Flash-Butt Welding

    OpenAIRE

    Chvertko,Yevgenia; Shevchenko,Mykola; Pirumov,Andriy

    2013-01-01

    Statistical methods of analysis are currently widely used to develop control and monitoring systems for different welding processes. These methods allow to obtain information about the process including effect of all factors on its results, which is often difficult to evaluate due to the complexity of the process. The authors made efforts to apply these methods to develop the system for monitoring the parameters of flash-butt welding in real-time mode. The paper gives brief information about ...

  8. Production of Energetic Nanomaterials by Spray Flash Evaporation

    OpenAIRE

    Martin Klaumünzer; Jakob Hübner; Denis Spitzer

    2016-01-01

    Within this paper, latest results on processing of energetic nanomaterials by means of the Spray Flash Evaporation technique are presented. This technology constitutes a highly effective and continuous way to prepare fascinating materials on the nano- and micro-scale. Within the process, a solution is set under high pressure and sprayed into an evacuated atomization chamber. Subsequent ultrafast evaporation of the solvent leads to an aerosol stream, which is separated by cyclones or filters. ...

  9. Media Pengetahuan Metamorfosis Kupu-Kupu dengan Adobe Flash

    OpenAIRE

    Adjie, Fauzan

    2015-01-01

    Kajian ini bertujuan untuk membangun sebuah sistem aplikasi pengenalan. Aplikasi pengethauan metamorfosis kupu - kupu ini dibuat dengan menggunakan perangkat lunak macromedia flash 5. Manfaat dari sistem pengenalan ini adalah membantu para siswa sekolah dasar maupun sekolah menengah atas untuk mengetahui metamorfosis kupu - kupu, khususnya pengetahuan alam. Isi yang di sampaikan mulai dari teori pengetahuan metamorfosis kupu - kupu, yaitu siklus hidup dan metamorfosis yang dimulai dari telur ...

  10. Crenulation-­1 Flash Report

    Energy Technology Data Exchange (ETDEWEB)

    Rousculp, Christopher L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Oro, David Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bradley, Joseph Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Griego, Jeffrey Randall [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Freeman, Matthew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Reinovsky, Robert Emil [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Turchi, Peter John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Reass, William Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-11

    We briefly report on the first of PHELIX driven Crenulation experiments diagnosed with proton radiography. PHELIX is a 300 kJ capacitor bank located at the LANL LANSCE pRad facility. It is capable of delivering a 4 MA, 10 us current pulse to a low inductance cylindrical load. Using a magnetically driven cylindrical liner, we have shocked a concentric tin cylindrical shell to melt-on-release and compared to theory and calculations. The inner surface of the tin cylinder has three sectors of single-mode perturbations, which are subject to Richtmyer-Meshkov Instability (RMI). Recent theoretical work on the EOS of tin has modified both the Hugoniot and the isentropes for release into various states in tabular data. The new multiphase EOS for tin, SESAME 2161, includes the beta and gamma solid phases as well as a liquid phase. It predicts a lower pressure boundary for release to pure solid (~20 GPa) and a higher pressure boundary for release to pure liquid (~35 GPa) than the existing SESAME 2160 table.

  11. Bio-oil from Flash Pyrolysis of Agricultural Residues

    DEFF Research Database (Denmark)

    Ibrahim, Norazana

    This thesis describes the production of bio-oils from flash pyrolysis of agricultural residues, using a pyrolysis centrifugal reactor (PCR). By thermal degradation of agricultural residues in the PCR, a liquid oil, char and non-condensable gases are produced. The yield of each fraction is influen......This thesis describes the production of bio-oils from flash pyrolysis of agricultural residues, using a pyrolysis centrifugal reactor (PCR). By thermal degradation of agricultural residues in the PCR, a liquid oil, char and non-condensable gases are produced. The yield of each fraction...... lower temperatures increase the yield of char. Liquid oil, however increases with temperature up to certain point and thereafter it decreases at still higher temperature due to secondary cracking of the primary products. The presence of moisture in the feed stock may also influences the pyrolysis...... process. The influence of reaction temperature and the moisture content on the flash pyrolysis product yield has been reported in Paper I (Chapter 2). It was observed that the presence of moisture in the wheat straw with different moisture levels of 1.5 wt. %, 6.2 wt. % and 15.0 wt. % have shown...

  12. Infrared Contrast Analysis Technique for Flash Thermography Nondestructive Evaluation

    Science.gov (United States)

    Koshti, Ajay

    2014-01-01

    The paper deals with the infrared flash thermography inspection to detect and analyze delamination-like anomalies in nonmetallic materials. It provides information on an IR Contrast technique that involves extracting normalized contrast verses time evolutions from the flash thermography infrared video data. The paper provides the analytical model used in the simulation of infrared image contrast. The contrast evolution simulation is achieved through calibration on measured contrast evolutions from many flat bottom holes in the subject material. The paper also provides formulas to calculate values of the thermal measurement features from the measured contrast evolution curve. Many thermal measurement features of the contrast evolution that relate to the anomaly characteristics are calculated. The measurement features and the contrast simulation are used to evaluate flash thermography inspection data in order to characterize the delamination-like anomalies. In addition, the contrast evolution prediction is matched to the measured anomaly contrast evolution to provide an assessment of the anomaly depth and width in terms of depth and diameter of the corresponding equivalent flat-bottom hole (EFBH) or equivalent uniform gap (EUG). The paper provides anomaly edge detection technique called the half-max technique which is also used to estimate width of an indication. The EFBH/EUG and half-max width estimations are used to assess anomaly size. The paper also provides some information on the "IR Contrast" software application, half-max technique and IR Contrast feature imaging application, which are based on models provided in this paper.

  13. MR study of intracranial disease with three-dimensional FLASH

    International Nuclear Information System (INIS)

    Runge, V.M.; Wood, M.L.; Kaufman, D.M.; Nelson, K.L.; Traill, M.R.; Wolpert, S.M.

    1987-01-01

    A three-dimensional FLASH technique was used to study 36 patients with intracranial disease at 1 T (Siemens Magnetom). This included 15 cases of intracranial neoplastic disease, four with the application of intravenous Gd-DTPA. Contiguous thin sections (1-2 mm thick) were acquired of the entire intracranial contents using one acquisition (scan time of 5-15 minutes). A MIPRON (KONTRON Instruments) image processing work station was used for rapid image display and 3D reconstruction. 3D FLASH was found to be superior to spin-echo imaging at 1 T for the detection of hemorrhage. 3D acquisition also provided superior localization of neoplastic disease. The T1 contrast achieved was comparable to spin-echo technique with a repetition time/echo time of .6/17. The advantages in terms of lesion localization and thin-section imaging with high spatial resolution of the entire brain may lead to use of 3D FLASH in place of conventional spin-echo imaging

  14. A terrestrial gamma ray flash observed from an aircraft

    Science.gov (United States)

    Smith, D. M.; Dwyer, J. R.; Hazelton, B. J.; Grefenstette, B. W.; Martinez-McKinney, G. F. M.; Zhang, Z. Y.; Lowell, A. W.; Kelley, N. A.; Splitt, M. E.; Lazarus, S. M.; Ulrich, W.; Schaal, M.; Saleh, Z. H.; Cramer, E.; Rassoul, H.; Cummer, S. A.; Lu, G.; Shao, X.-M.; Ho, C.; Hamlin, T.; Blakeslee, R. J.; Heckman, S.

    2011-10-01

    On 21 August 2009, the Airborne Detector for Energetic Lightning Emissions (ADELE), an array of six gamma-ray detectors, detected a brief burst of gamma rays while flying aboard a Gulfstream V jet near two active thunderstorm cells. The duration and spectral characteristics of the event are consistent with the terrestrial gamma ray flashes (TGFs) seen by instruments in low Earth orbit. A long-duration, complex +IC flash was taking place in the nearer cell at the same time, at a distance of ˜10 km from the plane. The sferics that are probably associated with this flash extended over 54 ms and included several ULF pulses corresponding to charge moment changes of up to 30 C km, this value being in the lower half of the range of sferics associated with TGFs seen from space. Monte Carlo simulations of gamma ray propagation in the Earth's atmosphere show that a TGF of normal intensity would, at this distance, have produced a gamma ray signal in ADELE of approximately the size and spectrum that was actually observed. We conclude that this was the first detection of a TGF from an aircraft. We show that because of the distance, ADELE's directional and spectral capabilities could not strongly constrain the source altitude of the TGF but that such constraints would be possible for TGFs detected at closer range.

  15. Turbulent spots and scalar flashes in pipe transition

    Science.gov (United States)

    Adrian, Ronald; Wu, Xiaohua; Moin, Parviz

    2017-11-01

    Recent study (Wu et al., PNAS, 1509451112, 2015) demonstrated the feasibility and accuracy of direct computation of the Osborne Reynolds' pipe transition experiment without the unphysical axially periodic boundary condition. Here we use this approach to address three questions: (1) What are the dynamics of turbulent spot generation in pipe transition? (2) How is the succession of scalar flashes, as observed and sketched by Osborne Reynolds, created? (3) What happens to the succession of flashes further downstream? In this study, the inlet disturbance is of radial-mode type imposed through a narrow, three-degree numerical wedge; and the simulation Reynolds number is 6500. Numerical dye is introduced at the inlet plane locally very close to the pipe axis, similar to the needle injection by O. Reynolds. Inception of infant turbulent spots occurs when normal, forward inclined hairpin packets form near the walls from the debris of the inlet perturbations. However, the young and mature turbulent spots consist almost exclusively of reverse, backward leaning hairpin vortices. Scalar flashes appear successively downstream and persist well into the fully-developed turbulent region. Their creation mechanism is addressed. RJA gratefully acknowledges support of the National Science Foundation with NSF Award CBET-0933848.

  16. Efficacy of desvenlafaxine succinate for menopausal hot flashes.

    Science.gov (United States)

    Tella, Sri Harsha; Gallagher, John Christopher

    2014-11-01

    The concern for the development of breast cancer, stroke, cardiovascular disease and deep venous thrombosis with the use of hormonal therapy has led to the development of alternative nonhormonal forms of therapy like desvenlafaxine for the management of hot flashes. This review is based upon a PubMed search and clinical trials. The pharmacokinetics and pharmacodynamics of desvenlafaxine are reviewed. This review outlines the effects of desvenlafaxine in management of severity and frequency of vasomotor symptoms, sleep quality and quality of life in postmenopausal women. The potential adverse effects of desvenlafaxine are summarized. Based on the evidence from randomized clinical trials, desvenlafaxine is an alternate viable option for reducing the frequency and severity of hot flashes when other treatments fail. In clinical trials, it has been shown that desvenlafaxine reduced the frequency of hot flashes by 55 - 69%. In the trials so far it appears to have good safety and tolerability profile when the drug is initiated in titrating doses. The optimum dose is 100 mg/day and is to be started at 50 mg/day for 3 days and titrated to 100 mg/day. The most common adverse events reported were nausea, dry mouth, fatigue, constipation, diarrhea and somnolence.

  17. The use of HBV model for flash flood forecasting

    Directory of Open Access Journals (Sweden)

    M. Kobold

    2006-01-01

    Full Text Available The standard conceptual HBV model was originally developed with daily data and is normally operated on daily time step. But many floods in Slovenia are usually flash floods as result of intense frontal precipitation combined with orographic enhancement. Peak discharges are maintained only for hours or even minutes. To use the HBV model for flash flood forecasting, the version of HBV-96 has been applied on the catchment with complex topography with the time step of one hour. The recording raingauges giving hourly values of precipitation have been taken in calibration of the model. The uncertainty of simulated runoff is mainly the result of precipitation uncertainty associated with the mean areal precipitation and is higher for mountainous catchments. Therefore the influence of number of raingauges used to derive the areal precipitation by the method of Thiessen polygons was investigated. The quantification of hydrological uncertainty has been performed by analysis of sensitivity of the HBV model to error in precipitation input. The results show that an error of 10% in the amount of precipitation causes an error of 17% in the peak of flood wave. The polynomial equations showing the relationship between the errors in rainfall amounts and peak discharges were derived for two water stations on the Savinja catchment. Simulated discharges of half-yearly runs demonstrate the applicability of the HBV model for flash flood forecasting using the mesoscale meteorological forecasts of ALADIN/SI model as input precipitation data.

  18. FLASH fly-by-light flight control demonstration results overview

    Science.gov (United States)

    Halski, Don J.

    1996-10-01

    The Fly-By-Light Advanced Systems Hardware (FLASH) program developed Fly-By-Light (FBL) and Power-By-Wire (PBW) technologies for military and commercial aircraft. FLASH consists of three tasks. Task 1 developed the fiber optic cable, connectors, testers and installation and maintenance procedures. Task 3 developed advanced smart, rotary thin wing and electro-hydrostatic (EHA) actuators. Task 2, which is the subject of this paper,l focused on integration of fiber optic sensors and data buses with cable plant components from Task 1 and actuators from Task 3 into centralized and distributed flight control systems. Both open loop and piloted hardware-in-the-loop demonstrations were conducted with centralized and distributed flight control architectures incorporating the AS-1773A optical bus, active hand controllers, optical sensors, optimal flight control laws in high speed 32-bit processors, and neural networks for EHA monitoring and fault diagnosis. This paper overviews the systems level testing conducted under the FLASH Flight Control task. Preliminary results are summarized. Companion papers provide additional information.

  19. An evaluation of the potential of Sentinel 1 for improving flash flood predictions via soil moisture-data assimilation

    Science.gov (United States)

    Cenci, Luca; Pulvirenti, Luca; Boni, Giorgio; Chini, Marco; Matgen, Patrick; Gabellani, Simone; Squicciarino, Giuseppe; Pierdicca, Nazzareno

    2017-11-01

    The assimilation of satellite-derived soil moisture estimates (soil moisture-data assimilation, SM-DA) into hydrological models has the potential to reduce the uncertainty of streamflow simulations. The improved capacity to monitor the closeness to saturation of small catchments, such as those characterizing the Mediterranean region, can be exploited to enhance flash flood predictions. When compared to other microwave sensors that have been exploited for SM-DA in recent years (e.g. the Advanced SCATterometer - ASCAT), characterized by low spatial/high temporal resolution, the Sentinel 1 (S1) mission provides an excellent opportunity to monitor systematically soil moisture (SM) at high spatial resolution and moderate temporal resolution. The aim of this research was thus to evaluate the impact of S1-based SM-DA for enhancing flash flood predictions of a hydrological model (Continuum) that is currently exploited for civil protection applications in Italy. The analysis was carried out in a representative Mediterranean catchment prone to flash floods, located in north-western Italy, during the time period October 2014-February 2015. It provided some important findings: (i) revealing the potential provided by S1-based SM-DA for improving discharge predictions, especially for higher flows; (ii) suggesting a more appropriate pre-processing technique to be applied to S1 data before the assimilation; and (iii) highlighting that even though high spatial resolution does provide an important contribution in a SM-DA system, the temporal resolution has the most crucial role. S1-derived SM maps are still a relatively new product and, to our knowledge, this is the first work published in an international journal dealing with their assimilation within a hydrological model to improve continuous streamflow simulations and flash flood predictions. Even though the reported results were obtained by analysing a relatively short time period, and thus should be supported by further

  20. Short Stature

    DEFF Research Database (Denmark)

    Christesen, Henrik Boye Thybo; Pedersen, Birgitte Tønnes; Pournara, Effie

    2016-01-01

    The use of appropriate growth standards/references is of significant clinical importance in assessing the height of children with short stature as it may determine eligibility for appropriate therapy. The aim of this study was to determine the impact of using World Health Organization (WHO) instead...... of national growth standards/references on height assessment in short children. Data were collected from routine clinical practice (1998-2014) from nine European countries that have available national growth references and were enrolled in NordiNet® International Outcome Study (IOS) (NCT00960128), a large......-scale, non-interventional, multinational study. The patient cohort consisted of 5996 short pediatric patients diagnosed with growth hormone deficiency (GHD), Turner syndrome (TS) or born small for gestational age (SGA). The proportions of children with baseline height standard deviation score (SDS) below...