WorldWideScience

Sample records for single satellite footprint

  1. Clouds and the Earth's Radiant Energy System (CERES) Visualization Single Satellite Footprint (SSF) Plot Generator

    Science.gov (United States)

    Barsi, Julia A.

    1995-01-01

    The first Clouds and the Earth's Radiant Energy System (CERES) instrument will be launched in 1997 to collect data on the Earth's radiation budget. The data retrieved from the satellite will be processed through twelve subsystems. The Single Satellite Footprint (SSF) plot generator software was written to assist scientists in the early stages of CERES data analysis, producing two-dimensional plots of the footprint radiation and cloud data generated by one of the subsystems. Until the satellite is launched, however, software developers need verification tools to check their code. This plot generator will aid programmers by geolocating algorithm result on a global map.

  2. The carbon footprint of an Australian satellite haemodialysis unit.

    Science.gov (United States)

    Lim, Allan E K; Perkins, Anthony; Agar, John W M

    2013-06-01

    This study aimed to better understand the carbon emission impact of haemodialysis (HD) throughout Australia by determining its carbon footprint, the relative contributions of various sectors to this footprint, and how contributions from electricity and water consumption are affected by local factors. Activity data associated with HD provision at a 6-chair suburban satellite HD unit in Victoria in 2011 was collected and converted to a common measurement unit of tonnes of CO2 equivalents (t CO2-eq) via established emissions factors. For electricity and water consumption, emissions factors for other Australian locations were applied to assess the impact of local factors on these footprint contributors. In Victoria, the annual per-patient carbon footprint of satellite HD was calculated to be 10.2t CO2-eq. The largest contributors were pharmaceuticals (35.7%) and medical equipment (23.4%). Throughout Australia, the emissions percentage attributable to electricity consumption ranged from 5.2% to 18.6%, while the emissions percentage attributable to water use ranged from 4.0% to 11.6%. State-by-state contributions of energy and water use to the carbon footprint of satellite HD appear to vary significantly. Performing emissions planning and target setting at the state level may be more appropriate in the Australian context. What is known about the topic? Healthcare provision carries a significant environmental footprint. In particular, conventional HD uses substantial amounts of electricity and water. In the UK, provision of HD and peritoneal dialysis was found to have an annual per-patient carbon footprint of 7.1t CO2-eq. What does this paper add? This is the first carbon-footprinting study of HD in Australia. In Victoria, the annual per-patient carbon footprint of satellite conventional HD is 10.2t CO2-eq. Notably, the contributions of electricity and water consumption to the carbon footprint varies significantly throughout Australia when local factors are taken into

  3. Single Purpose Satellite Systems

    OpenAIRE

    Watkins, Warren

    1989-01-01

    This paper examines the need for tactically responsive space systems capable of supporting battlefield and fleet commanders. Terminology used to describe this category of satellite system varies according to organization or agency. The Defense Advanced Research Projects Agency's Lightsat, the Naval Space Command's SPINSAT, and the Air Force Space Command s TACSAT, are reviewed. The United State Space Command's space support mission IS addressed and the role single-purpose satellites can play ...

  4. OMI NO2 column densities over North American urban cities: the effect of satellite footprint resolution

    Science.gov (United States)

    Kim, Hyun Cheol; Lee, Pius; Judd, Laura; Pan, Li; Lefer, Barry

    2016-03-01

    Nitrogen dioxide vertical column density (NO2 VCD) measurements via satellite are compared with a fine-scale regional chemistry transport model, using a new approach that considers varying satellite footprint sizes. Space-borne NO2 VCD measurement has been used as a proxy for surface nitrogen oxide (NOx) emission, especially for anthropogenic urban emission, so accurate comparison of satellite and modeled NO2 VCD is important in determining the future direction of NOx emission policy. The NASA Ozone Monitoring Instrument (OMI) NO2 VCD measurements, retrieved by the Royal Netherlands Meteorological Institute (KNMI), are compared with a 12 km Community Multi-scale Air Quality (CMAQ) simulation from the National Oceanic and Atmospheric Administration. We found that the OMI footprint-pixel sizes are too coarse to resolve urban NO2 plumes, resulting in a possible underestimation in the urban core and overestimation outside. In order to quantify this effect of resolution geometry, we have made two estimates. First, we constructed pseudo-OMI data using fine-scale outputs of the model simulation. Assuming the fine-scale model output is a true measurement, we then collected real OMI footprint coverages and performed conservative spatial regridding to generate a set of fake OMI pixels out of fine-scale model outputs. When compared to the original data, the pseudo-OMI data clearly showed smoothed signals over urban locations, resulting in roughly 20-30 % underestimation over major cities. Second, we further conducted conservative downscaling of OMI NO2 VCDs using spatial information from the fine-scale model to adjust the spatial distribution, and also applied averaging kernel (AK) information to adjust the vertical structure. Four-way comparisons were conducted between OMI with and without downscaling and CMAQ with and without AK information. Results show that OMI and CMAQ NO2 VCDs show the best agreement when both downscaling and AK methods are applied, with the correlation

  5. Covariance between Arctic sea ice and clouds within atmospheric state regimes at the satellite footprint level.

    Science.gov (United States)

    Taylor, Patrick C; Kato, Seiji; Xu, Kuan-Man; Cai, Ming

    2015-12-27

    Understanding the cloud response to sea ice change is necessary for modeling Arctic climate. Previous work has primarily addressed this problem from the interannual variability perspective. This paper provides a refined perspective of sea ice-cloud relationship in the Arctic using a satellite footprint-level quantification of the covariance between sea ice and Arctic low cloud properties from NASA A-Train active remote sensing data. The covariances between Arctic low cloud properties and sea ice concentration are quantified by first partitioning each footprint into four atmospheric regimes defined using thresholds of lower tropospheric stability and midtropospheric vertical velocity. Significant regional variability in the cloud properties is found within the atmospheric regimes indicating that the regimes do not completely account for the influence of meteorology. Regional anomalies are used to account for the remaining meteorological influence on clouds. After accounting for meteorological regime and regional influences, a statistically significant but weak covariance between cloud properties and sea ice is found in each season for at least one atmospheric regime. Smaller average cloud fraction and liquid water are found within footprints with more sea ice. The largest-magnitude cloud-sea ice covariance occurs between 500 m and 1.2 km when the lower tropospheric stability is between 16 and 24 K. The covariance between low cloud properties and sea ice is found to be largest in fall and is accompanied by significant changes in boundary layer temperature structure where larger average near-surface static stability is found at larger sea ice concentrations.

  6. Covariance Between Arctic Sea Ice and Clouds Within Atmospheric State Regimes at the Satellite Footprint Level

    Science.gov (United States)

    Taylor, Patrick C.; Kato, Seiji; Xu, Kuan-Man; Cai, Ming

    2015-01-01

    Understanding the cloud response to sea ice change is necessary for modeling Arctic climate. Previous work has primarily addressed this problem from the interannual variability perspective. This paper provides a refined perspective of sea ice-cloud relationship in the Arctic using a satellite footprint-level quantification of the covariance between sea ice and Arctic low cloud properties from NASA A-Train active remote sensing data. The covariances between Arctic low cloud properties and sea ice concentration are quantified by first partitioning each footprint into four atmospheric regimes defined using thresholds of lower tropospheric stability and mid-tropospheric vertical velocity. Significant regional variability in the cloud properties is found within the atmospheric regimes indicating that the regimes do not completely account for the influence of meteorology. Regional anomalies are used to account for the remaining meteorological influence on clouds. After accounting for meteorological regime and regional influences, a statistically significant but weak covariance between cloud properties and sea ice is found in each season for at least one atmospheric regime. Smaller average cloud fraction and liquid water are found within footprints with more sea ice. The largest-magnitude cloud-sea ice covariance occurs between 500m and 1.2 km when the lower tropospheric stability is between 16 and 24 K. The covariance between low cloud properties and sea ice is found to be largest in fall and is accompanied by significant changes in boundary layer temperature structure where larger average near-surface static stability is found at larger sea ice concentrations.

  7. Single-footprint retrievals of temperature, water vapor and cloud properties from AIRS

    Science.gov (United States)

    Irion, Fredrick W.; Kahn, Brian H.; Schreier, Mathias M.; Fetzer, Eric J.; Fishbein, Evan; Fu, Dejian; Kalmus, Peter; Wilson, R. Chris; Wong, Sun; Yue, Qing

    2018-02-01

    Single-footprint Atmospheric Infrared Sounder spectra are used in an optimal estimation-based algorithm (AIRS-OE) for simultaneous retrieval of atmospheric temperature, water vapor, surface temperature, cloud-top temperature, effective cloud optical depth and effective cloud particle radius. In a departure from currently operational AIRS retrievals (AIRS V6), cloud scattering and absorption are in the radiative transfer forward model and AIRS single-footprint thermal infrared data are used directly rather than cloud-cleared spectra (which are calculated using nine adjacent AIRS infrared footprints). Coincident MODIS cloud data are used for cloud a priori data. Using single-footprint spectra improves the horizontal resolution of the AIRS retrieval from ˜ 45 to ˜ 13.5 km at nadir, but as microwave data are not used, the retrieval is not made at altitudes below thick clouds. An outline of the AIRS-OE retrieval procedure and information content analysis is presented. Initial comparisons of AIRS-OE to AIRS V6 results show increased horizontal detail in the water vapor and relative humidity fields in the free troposphere above the clouds. Initial comparisons of temperature, water vapor and relative humidity profiles with coincident radiosondes show good agreement. Future improvements to the retrieval algorithm, and to the forward model in particular, are discussed.

  8. Seasonally-managed wetland footprint delineation using Landsat ETM+ satellite imagery

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, Nigel W. T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Epshtein, Olga [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Arizona State Univ., Tempe, AZ (United States). School of Sustainable Engineering and the Built Environment

    2014-01-09

    One major challenge in water resource management is the estimation of evapotranspiration losses from seasonally managed wetlands. Quantifying these losses is complicated by the dynamic nature of the wetlands' areal footprint during the periods of flood-up and drawdown. In this paper, we present a data-lean solution to this problem using an example application in the San Joaquin Basin, California. Through analysis of high-resolution Landsat Enhanced Thematic Mapper Plus (ETM+) satellite imagery, we develop a metric to better capture the extent of total flooded wetland area. The procedure is validated using year-long, continuously-logged field datasets for two wetlands within the study area. The proposed classification which uses a Landsat ETM + Band 5 (mid-IR wavelength) to Band 2 (visible green wavelength) ratio improves estimates by 30–50% relative to previous wetland delineation studies. Finally, requiring modest ancillary data, the study results provide a practical and efficient option for wetland management in data-sparse regions or un-gauged watersheds.

  9. Multi-Timescale Analysis of the Spatial Representativeness of In Situ Soil Moisture Data within Satellite Footprints

    Science.gov (United States)

    Molero, B.; Leroux, D. J.; Richaume, P.; Kerr, Y. H.; Merlin, O.; Cosh, M. H.; Bindlish, R.

    2018-01-01

    We conduct a novel comprehensive investigation that seeks to prove the connection between spatial scales and timescales in surface soil moisture (SM) within the satellite footprint ( 50 km). Modeled and measured point series at Yanco and Little Washita in situ networks are first decomposed into anomalies at timescales ranging from 0.5 to 128 days, using wavelet transforms. Then, their degree of spatial representativeness is evaluated on a per-timescale basis by comparison to large spatial scale data sets (the in situ spatial average, SMOS, AMSR2, and ECMWF). Four methods are used for this: temporal stability analysis (TStab), triple collocation (TC), percentage of correlated areas (CArea), and a new proposed approach that uses wavelet-based correlations (WCor). We found that the mean of the spatial representativeness values tends to increase with the timescale but so does their dispersion. Locations exhibit poor spatial representativeness at scales below 4 days, while either very good or poor representativeness at seasonal scales. Regarding the methods, TStab cannot be applied to the anomaly series due to their multiple zero-crossings, and TC is suitable for week and month scales but not for other scales where data set cross-correlations are found low. In contrast, WCor and CArea give consistent results at all timescales. WCor is less sensitive to the spatial sampling density, so it is a robust method that can be applied to sparse networks (one station per footprint). These results are promising to improve the validation and downscaling of satellite SM series and the optimization of SM networks.

  10. Genome-wide Single-Molecule Footprinting Reveals High RNA Polymerase II Turnover at Paused Promoters.

    Science.gov (United States)

    Krebs, Arnaud R; Imanci, Dilek; Hoerner, Leslie; Gaidatzis, Dimos; Burger, Lukas; Schübeler, Dirk

    2017-08-03

    Transcription initiation entails chromatin opening followed by pre-initiation complex formation and RNA polymerase II recruitment. Subsequent polymerase elongation requires additional signals, resulting in increased residence time downstream of the start site, a phenomenon referred to as pausing. Here, we harnessed single-molecule footprinting to quantify distinct steps of initiation in vivo throughout the Drosophila genome. This identifies the impact of promoter structure on initiation dynamics in relation to nucleosomal occupancy. Additionally, perturbation of transcriptional initiation reveals an unexpectedly high turnover of polymerases at paused promoters-an observation confirmed at the level of nascent RNAs. These observations argue that absence of elongation is largely caused by premature termination rather than by stable polymerase stalling. In support of this non-processive model, we observe that induction of the paused heat shock promoter depends on continuous initiation. Our study provides a framework to quantify protein binding at single-molecule resolution and refines concepts of transcriptional pausing. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  11. Foraminiferal single chamber analyses of heavy metals as a tool for monitoring permanent and short term anthropogenic footprints.

    Science.gov (United States)

    Titelboim, Danna; Sadekov, Aleksey; Hyams-Kaphzan, Orit; Almogi-Labin, Ahuva; Herut, Barak; Kucera, Michal; Abramovich, Sigal

    2018-03-01

    In order to establish environmentally sustainable industries there is a need for high-resolution temporal and spatial monitoring of heavy metal pollutants even at low concentrations before they become hazardous for local ecosystems. Here we present single chamber records of Cu, Zn and Pb in shells of two benthic foraminifera species with different shell types from two shallow coastal stations in Israel: An area adjacent to an electrical power plant and desalination factory (Hadera) and an industrially free nature reserve (Nachsholim). Records of both foraminifera species show elevated metal concentrations in Hadera clearly identifying the footprint of the local industrial facilities. Moreover, short-term events of elevated Cu and Pb concentrations were detected by single chamber analyses. This study demonstrates the potential of using heavy metals anomalies in foraminiferal single chambers as a tool for detecting the industrial footprint of coastal facilities as well as short term events of elevated heavy metals. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Carbon Footprint in Flexible Ureteroscopy: A Comparative Study on the Environmental Impact of Reusable and Single-Use Ureteroscopes.

    Science.gov (United States)

    Davis, Niall F; McGrath, Shannon; Quinlan, Mark; Jack, Gregory; Lawrentschuk, Nathan; Bolton, Damien M

    2018-03-01

    There are no comparative assessments on the environmental impact of endourologic instruments. We evaluated and compared the environmental impact of single-use flexible ureteroscopes with reusable flexible ureteroscopes. An analysis of the typical life cycle of the LithoVue™ (Boston Scientific) single-use digital flexible ureteroscope and Olympus Flexible Video Ureteroscope (URV-F) was performed. To measure the carbon footprint, data were obtained on manufacturing of single-use and reusable flexible ureteroscopes and from typical uses obtained with a reusable scope, including repairs, replacement instruments, and ultimate disposal of both ureteroscopes. The solid waste generated (kg) and energy consumed (kWh) during each case were quantified and converted into their equivalent mass of carbon dioxide (kg of CO 2 ) released. Flexible ureteroscopic raw materials composed of plastic (90%), steel (4%), electronics (4%), and rubber (2%). The manufacturing cost of a flexible ureteroscope was 11.49 kg of CO 2 per 1 kg of ureteroscope. The weight of the single-use LithoVue and URV-F flexible ureteroscope was 0.3 and 1 kg, respectively. The total carbon footprint of the lifecycle assessment of the LithoVue was 4.43 kg of CO 2 per endourologic case. The total carbon footprint of the lifecycle of the reusable ureteroscope was 4.47 kg of CO 2 per case. The environmental impacts of the reusable flexible ureteroscope and the single-use flexible ureteroscope are comparable. Urologists should be aware that the typical life cycle of urologic instruments is a concerning source of environmental emissions.

  13. Moving Target Information Extraction Based on Single Satellite Image

    Directory of Open Access Journals (Sweden)

    ZHAO Shihu

    2015-03-01

    Full Text Available The spatial and time variant effects in high resolution satellite push broom imaging are analyzed. A spatial and time variant imaging model is established. A moving target information extraction method is proposed based on a single satellite remote sensing image. The experiment computes two airplanes' flying speed using ZY-3 multispectral image and proves the validity of spatial and time variant model and moving information extracting method.

  14. Single versus mixture Weibull distributions for nonparametric satellite reliability

    International Nuclear Information System (INIS)

    Castet, Jean-Francois; Saleh, Joseph H.

    2010-01-01

    Long recognized as a critical design attribute for space systems, satellite reliability has not yet received the proper attention as limited on-orbit failure data and statistical analyses can be found in the technical literature. To fill this gap, we recently conducted a nonparametric analysis of satellite reliability for 1584 Earth-orbiting satellites launched between January 1990 and October 2008. In this paper, we provide an advanced parametric fit, based on mixture of Weibull distributions, and compare it with the single Weibull distribution model obtained with the Maximum Likelihood Estimation (MLE) method. We demonstrate that both parametric fits are good approximations of the nonparametric satellite reliability, but that the mixture Weibull distribution provides significant accuracy in capturing all the failure trends in the failure data, as evidenced by the analysis of the residuals and their quasi-normal dispersion.

  15. X-pod: a small footprint multi-legged piezoelectric single-crystal unimorph-based actuator concept

    Science.gov (United States)

    Shukla, Rahul; Lim, Leong-Chew; Gandhi, Prasanna

    2012-06-01

    Multi-legged piezoelectric single-crystal actuators with small footprints using an X-pod approach, namely, the Tripod and Tetrapod, have been conceptualized, each leg being a unimorph driven by Pb(Zn1/3Nb2/3)O3-(6-7)%PbTiO3 (PZN-(6-7)%PT) single crystals of [110]L × [001]T cut. Both finite-element analysis and experimental investigations are carried out to evaluate the performance of the Tripod and Tetrapod actuators. When operated at 0.57 kV mm-1, both actuators exhibit an axial displacement of nearly 60 µm. Blocking forces of about 10 N and 14 N are observed for the Tripod and the Tetrapod, respectively. The blocking forces are roughly doubled if the perfectly clamped condition is imposed for the legs at the pedestal end while the axial displacement is lowered marginally by 12%. In addition to small footprints, other attractive features of the actuators include greater flexibility to modify the leg geometry and their inclination to suit the application.

  16. Using a single chip FEC for satellite systems

    Science.gov (United States)

    Onotera, L.; Nicholson, R.

    Information transmission over digital satellite communication channels is primarily power-limited, where forward error correction (FEC) codes can significantly improve performance. The use of FEC can reduce the required signal to noise ratio to sustain a given bit error rate. The use of forward error correction has become a standard part of present day digital satellite communication systems. Means of applying a new very large scale integration (VLSI) integrated circuit FEC chip into various kinds of systems is discussed. Specifically, some of the considerations and tradeoffs in continuous single channel per carrier (SCPC), multiple channels per carrier (MCPC), and burst systems are related to the new design. This new chip will provide an effective space and cost advantage by inserting a powerful forward error correction capability into most types of satellite digital communication links.

  17. Phylogenetic footprinting of non-coding RNA: hammerhead ribozyme sequences in a satellite DNA family of Dolichopoda cave crickets (Orthoptera, Rhaphidophoridae

    Directory of Open Access Journals (Sweden)

    Venanzetti Federica

    2010-01-01

    Full Text Available Abstract Background The great variety in sequence, length, complexity, and abundance of satellite DNA has made it difficult to ascribe any function to this genome component. Recent studies have shown that satellite DNA can be transcribed and be involved in regulation of chromatin structure and gene expression. Some satellite DNAs, such as the pDo500 sequence family in Dolichopoda cave crickets, have a catalytic hammerhead (HH ribozyme structure and activity embedded within each repeat. Results We assessed the phylogenetic footprints of the HH ribozyme within the pDo500 sequences from 38 different populations representing 12 species of Dolichopoda. The HH region was significantly more conserved than the non-hammerhead (NHH region of the pDo500 repeat. In addition, stems were more conserved than loops. In stems, several compensatory mutations were detected that maintain base pairing. The core region of the HH ribozyme was affected by very few nucleotide substitutions and the cleavage position was altered only once among 198 sequences. RNA folding of the HH sequences revealed that a potentially active HH ribozyme can be found in most of the Dolichopoda populations and species. Conclusions The phylogenetic footprints suggest that the HH region of the pDo500 sequence family is selected for function in Dolichopoda cave crickets. However, the functional role of HH ribozymes in eukaryotic organisms is unclear. The possible functions have been related to trans cleavage of an RNA target by a ribonucleoprotein and regulation of gene expression. Whether the HH ribozyme in Dolichopoda is involved in similar functions remains to be investigated. Future studies need to demonstrate how the observed nucleotide changes and evolutionary constraint have affected the catalytic efficiency of the hammerhead.

  18. Single-footprint retrievals for AIRS using a fast TwoSlab cloud-representation model and the SARTA all-sky infrared radiative transfer algorithm

    Directory of Open Access Journals (Sweden)

    S. DeSouza-Machado

    2018-01-01

    Full Text Available One-dimensional variational retrievals of temperature and moisture fields from hyperspectral infrared (IR satellite sounders use cloud-cleared radiances (CCRs as their observation. These derived observations allow the use of clear-sky-only radiative transfer in the inversion for geophysical variables but at reduced spatial resolution compared to the native sounder observations. Cloud clearing can introduce various errors, although scenes with large errors can be identified and ignored. Information content studies show that, when using multilayer cloud liquid and ice profiles in infrared hyperspectral radiative transfer codes, there are typically only 2–4 degrees of freedom (DOFs of cloud signal. This implies a simplified cloud representation is sufficient for some applications which need accurate radiative transfer. Here we describe a single-footprint retrieval approach for clear and cloudy conditions, which uses the thermodynamic and cloud fields from numerical weather prediction (NWP models as a first guess, together with a simple cloud-representation model coupled to a fast scattering radiative transfer algorithm (RTA. The NWP model thermodynamic and cloud profiles are first co-located to the observations, after which the N-level cloud profiles are converted to two slab clouds (TwoSlab; typically one for ice and one for water clouds. From these, one run of our fast cloud-representation model allows an improvement of the a priori cloud state by comparing the observed and model-simulated radiances in the thermal window channels. The retrieval yield is over 90 %, while the degrees of freedom correlate with the observed window channel brightness temperature (BT which itself depends on the cloud optical depth. The cloud-representation and scattering package is benchmarked against radiances computed using a maximum random overlap (RMO cloud scheme. All-sky infrared radiances measured by NASA's Atmospheric Infrared Sounder (AIRS and NWP

  19. Single-footprint retrievals for AIRS using a fast TwoSlab cloud-representation model and the SARTA all-sky infrared radiative transfer algorithm

    Science.gov (United States)

    DeSouza-Machado, Sergio; Larrabee Strow, L.; Tangborn, Andrew; Huang, Xianglei; Chen, Xiuhong; Liu, Xu; Wu, Wan; Yang, Qiguang

    2018-01-01

    One-dimensional variational retrievals of temperature and moisture fields from hyperspectral infrared (IR) satellite sounders use cloud-cleared radiances (CCRs) as their observation. These derived observations allow the use of clear-sky-only radiative transfer in the inversion for geophysical variables but at reduced spatial resolution compared to the native sounder observations. Cloud clearing can introduce various errors, although scenes with large errors can be identified and ignored. Information content studies show that, when using multilayer cloud liquid and ice profiles in infrared hyperspectral radiative transfer codes, there are typically only 2-4 degrees of freedom (DOFs) of cloud signal. This implies a simplified cloud representation is sufficient for some applications which need accurate radiative transfer. Here we describe a single-footprint retrieval approach for clear and cloudy conditions, which uses the thermodynamic and cloud fields from numerical weather prediction (NWP) models as a first guess, together with a simple cloud-representation model coupled to a fast scattering radiative transfer algorithm (RTA). The NWP model thermodynamic and cloud profiles are first co-located to the observations, after which the N-level cloud profiles are converted to two slab clouds (TwoSlab; typically one for ice and one for water clouds). From these, one run of our fast cloud-representation model allows an improvement of the a priori cloud state by comparing the observed and model-simulated radiances in the thermal window channels. The retrieval yield is over 90 %, while the degrees of freedom correlate with the observed window channel brightness temperature (BT) which itself depends on the cloud optical depth. The cloud-representation and scattering package is benchmarked against radiances computed using a maximum random overlap (RMO) cloud scheme. All-sky infrared radiances measured by NASA's Atmospheric Infrared Sounder (AIRS) and NWP thermodynamic and cloud

  20. Evapotranspiration as a component of water footprint: use of conventional and satellite data for better estimation of spatial and temporal pattern

    Science.gov (United States)

    Struzik, Piotr; Kepinska-Kasprzak, Malgorzata

    2014-08-01

    One of the main scientific goals of the COST Action ES1106 ("Assessment of European Agriculture Water use and Trade under Climate Change" EURO-AGRIWAT) is the analysis of the global water footprint (WF) in agriculture and virtual water trade (VWT). The starting point for further activities is analyses and inventory of data and tools which could be helpful for WF and WFT assessments. Evaporation values (ET) are crucial for agriculture where estimates of water reserves available for crops are the basis for scheduling the time and intensity of irrigation, yield prognoses, etc. Detail evapotranspiration data are, therefore, of essential value. However, stations performing direct measurements of evapotranspiration are very scarcely distributed in Poland for which reason the interpolation of the data is necessarily biased. Hence, evapotranspiration values are calculated using indirect methods (usually empirical formulas). Data from geostationary meteorological satellites are used operationally for determination of evapotranspiration with good spatial and temporal resolution (e.g. Land-SAF product). Study of relation between evapotranspiration values determined with use of satellite data and calculated using Penman-Monteith formula was performed for the study area in Poland. Daily values and cumulated (i.e. decadal, monthly and yearly) values were analyzed to determine quality and possible added value of the satellite product. Relation between reference ET and actual ET in two consecutive years was discussed, both for whole test area and individual stations, taking into account land use and possible water deficit in the root region, represented by H-SAF soil wetness index product. The differences were presented and discussed.

  1. Anatomic single-bundle ACL surgery: consequences of tibial tunnel diameter and drill-guide angle on tibial footprint coverage.

    Science.gov (United States)

    Van der Bracht, H; Verhelst, L; Stuyts, B; Page, B; Bellemans, J; Verdonk, P

    2014-05-01

    To investigate the consequences of differences in drill-guide angle and tibial tunnel diameter on the amount of tibial anatomical anterior cruciate ligament (ACL) footprint coverage and the risk of overhang of the tibial tunnel aperture over the edges of the native tibial ACL footprint. Twenty fresh-frozen adult human knee specimens with a median age of 46 years were used for this study. Digital templates mimicking the ellipsoid aperture of tibial tunnels with a different drill-guide angle and a different diameter were designed. The centres of these templates were positioned over the geometric centre of the tibial ACL footprint. The amount of tibial ACL footprint coverage and overhang was calculated. Risk factors for overhang were determined. Footprint coverage and the risk of overhang were also compared between a lateral tibial tunnel and a classic antero-medial tibial tunnel. A larger tibial tunnel diameter and a smaller drill-guide angle both will create significant more footprint coverage and overhang. In 45% of the knees, an overhang was created with a 10-mm diameter tibial tunnel with drill-guide angle 45°. Furthermore, a lateral tibial tunnel was found not to be at increased risk of overhang. A larger tibial tunnel diameter and a smaller drill-guide angle both will increase the amount of footprint coverage. Inversely, larger tibial tunnel diameters and smaller drill-guide angles will increase the risk of overhang of the tibial tunnel aperture over the edges of the native tibial ACL footprint. A lateral tibial tunnel does not increase the risk of overhang.

  2. Frequency of Arrival-based Interference Localization Using a Single Satellite

    OpenAIRE

    Kalantari, Ashkan; Maleki, Sina; Chatzinotas, Symeon; Ottersten, Björn

    2016-01-01

    Intentional and unintentional interferences are an increasing threat for the satellite communications industry. In this paper, we aim to localize an interference with unknown location using frequency of arrival (FoA) technique by only relying on the measurements obtained through a single satellite. In each time instance, the satellite samples the interference and forwards it to the gateway to estimate its frequency. Since the satellite moves, each estimated frequency includes a Doppler shift,...

  3. An AdaBoost Based Approach to Automatic Classification and Detection of Buildings Footprints, Vegetation Areas and Roads from Satellite Images

    Science.gov (United States)

    Gonulalan, Cansu

    In recent years, there has been an increasing demand for applications to monitor the targets related to land-use, using remote sensing images. Advances in remote sensing satellites give rise to the research in this area. Many applications ranging from urban growth planning to homeland security have already used the algorithms for automated object recognition from remote sensing imagery. However, they have still problems such as low accuracy on detection of targets, specific algorithms for a specific area etc. In this thesis, we focus on an automatic approach to classify and detect building foot-prints, road networks and vegetation areas. The automatic interpretation of visual data is a comprehensive task in computer vision field. The machine learning approaches improve the capability of classification in an intelligent way. We propose a method, which has high accuracy on detection and classification. The multi class classification is developed for detecting multiple objects. We present an AdaBoost-based approach along with the supervised learning algorithm. The combi- nation of AdaBoost with "Attentional Cascade" is adopted from Viola and Jones [1]. This combination decreases the computation time and gives opportunity to real time applications. For the feature extraction step, our contribution is to combine Haar-like features that include corner, rectangle and Gabor. Among all features, AdaBoost selects only critical features and generates in extremely efficient cascade structured classifier. Finally, we present and evaluate our experimental results. The overall system is tested and high performance of detection is achieved. The precision rate of the final multi-class classifier is over 98%.

  4. Satellites

    International Nuclear Information System (INIS)

    Burns, J.A.; Matthews, M.S.

    1986-01-01

    The present work is based on a conference: Natural Satellites, Colloquium 77 of the IAU, held at Cornell University from July 5 to 9, 1983. Attention is given to the background and origins of satellites, protosatellite swarms, the tectonics of icy satellites, the physical characteristics of satellite surfaces, and the interactions of planetary magnetospheres with icy satellite surfaces. Other topics include the surface composition of natural satellites, the cratering of planetary satellites, the moon, Io, and Europa. Consideration is also given to Ganymede and Callisto, the satellites of Saturn, small satellites, satellites of Uranus and Neptune, and the Pluto-Charon system

  5. Variability of tsunami inundation footprints considering stochastic scenarios based on a single rupture model: Application to the 2011 Tohoku earthquake

    KAUST Repository

    Goda, Katsuichiro

    2015-06-30

    The sensitivity and variability of spatial tsunami inundation footprints in coastal cities and towns due to a megathrust subduction earthquake in the Tohoku region of Japan are investigated by considering different fault geometry and slip distributions. Stochastic tsunami scenarios are generated based on the spectral analysis and synthesis method with regards to an inverted source model. To assess spatial inundation processes accurately, tsunami modeling is conducted using bathymetry and elevation data with 50 m grid resolutions. Using the developed methodology for assessing variability of tsunami hazard estimates, stochastic inundation depth maps can be generated for local coastal communities. These maps are important for improving disaster preparedness by understanding the consequences of different situations/conditions, and by communicating uncertainty associated with hazard predictions. The analysis indicates that the sensitivity of inundation areas to the geometrical parameters (i.e., top-edge depth, strike, and dip) depends on the tsunami source characteristics and the site location, and is therefore complex and highly nonlinear. The variability assessment of inundation footprints indicates significant influence of slip distributions. In particular, topographical features of the region, such as ria coast and near-shore plain, have major influence on the tsunami inundation footprints.

  6. Performance improvement for GPS single frequency kinematic relative positioning under poor satellite visibility

    OpenAIRE

    Chen, Wantong

    2016-01-01

    Reliable ambiguity resolution in difficult environments such as during setting/rising events of satellites or during limited satellite visibility is a significant challenge for GPS single frequency kinematic relative positioning. Here, a recursive estimation method combining both code and carrier phase measurements was developed that can tolerate recurrent satellite setting/rising and accelerate initialization in motion. We propose an ambiguity dimension expansion method by utilizing the part...

  7. Experimental study of heating scheme effect on the inner divertor power footprint widths in EAST lower single null discharges

    Science.gov (United States)

    Deng, G. Z.; Xu, J. C.; Liu, X.; Liu, X. J.; Liu, J. B.; Zhang, H.; Liu, S. C.; Chen, L.; Yan, N.; Feng, W.; Liu, H.; Xia, T. Y.; Zhang, B.; Shao, L. M.; Ming, T. F.; Xu, G. S.; Guo, H. Y.; Xu, X. Q.; Gao, X.; Wang, L.

    2018-04-01

    A comprehensive work of the effects of plasma current and heating schemes on divertor power footprint widths is carried out in the experimental advanced superconducting tokamak (EAST). The divertor power footprint widths, i.e., the scrape-off layer heat flux decay length λ q and the heat spreading S, are crucial physical and engineering parameters for fusion reactors. Strong inverse scaling of λ q and S with plasma current have been demonstrated for both neutral beam (NB) and lower hybrid wave (LHW) heated L-mode and H-mode plasmas at the inner divertor target. For plasmas heated by the combination of the two kinds of auxiliary heating schemes (NB and LHW), the divertor power widths tend to be larger in plasmas with higher ratio of LHW power. Comparison between experimental heat flux profiles at outer mid-plane (OMP) and divertor target for NB heated and LHW heated L-mode plasmas reveals that the magnetic topology changes induced by LHW may be the main reason to the wider divertor power widths in LHW heated discharges. The effect of heating schemes on divertor peak heat flux has also been investigated, and it is found that LHW heated discharges tend to have a lower divertor peak heat flux compared with NB heated discharges under similar input power. All these findings seem to suggest that plasmas with LHW auxiliary heating scheme are better heat exhaust scenarios for fusion reactors and should be the priorities for the design of next-step fusion reactors like China Fusion Engineering Test Reactor.

  8. Performance improvement for GPS single frequency kinematic relative positioning under poor satellite visibility.

    Science.gov (United States)

    Chen, Wantong

    2016-01-01

    Reliable ambiguity resolution in difficult environments such as during setting/rising events of satellites or during limited satellite visibility is a significant challenge for GPS single frequency kinematic relative positioning. Here, a recursive estimation method combining both code and carrier phase measurements was developed that can tolerate recurrent satellite setting/rising and accelerate initialization in motion. We propose an ambiguity dimension expansion method by utilizing the partial ambiguity relevance of previous and current observations. In essence, this method attempts to integrate all useful information into the recursive estimation equation and performs a better least squares adjustment. Using this method, the success rate of the extended ambiguity estimation is independent of the satellite setting and shows robust performance despite poor satellite visibility. Our model allows integration of other useful information into the recursive process. Actual experiments in urban environments demonstrate that the proposed algorithm can improve the reliability and availability of relative positioning.

  9. Modified iterated extended Kalman particle filter for single satellite passive tracking

    OpenAIRE

    WU, Panlong; KONG, Jianshou; BO, Yuming

    2013-01-01

    Single satellite-to-satellite passive tracking techniques have great significance in space surveillance systems. A new passive modified iterated extended Kalman particle filter (MIEKPF) using bearings-only measurements in the Earth-Centered Inertial Coordinate System is proposed. The modified iterated extended Kalman filter (MIEKF), with a new maximum likelihood iteration termination criterion, is used to generate the proposal distribution of the MIEKPF. Moreover, a new measurement u...

  10. Pyrite footprinting of RNA

    International Nuclear Information System (INIS)

    Schlatterer, Jörg C.; Wieder, Matthew S.; Jones, Christopher D.; Pollack, Lois; Brenowitz, Michael

    2012-01-01

    Highlights: ► RNA structure is mapped by pyrite mediated · OH footprinting. ► Repetitive experiments can be done in a powdered pyrite filled cartridge. ► High · OH reactivity of nucleotides imply dynamic role in Diels–Alderase catalysis. -- Abstract: In RNA, function follows form. Mapping the surface of RNA molecules with chemical and enzymatic probes has revealed invaluable information about structure and folding. Hydroxyl radicals ( · OH) map the surface of nucleic acids by cutting the backbone where it is accessible to solvent. Recent studies showed that a microfluidic chip containing pyrite (FeS 2 ) can produce sufficient · OH to footprint DNA. The 49-nt Diels–Alder RNA enzyme catalyzes the C–C bond formation between a diene and a dienophile. A crystal structure, molecular dynamics simulation and atomic mutagenesis studies suggest that nucleotides of an asymmetric bulge participate in the dynamic architecture of the ribozyme’s active center. Of note is that residue U42 directly interacts with the product in the crystallized RNA/product complex. Here, we use powdered pyrite held in a commercially available cartridge to footprint the Diels–Alderase ribozyme with single nucleotide resolution. Residues C39 to U42 are more reactive to · OH than predicted by the solvent accessibility calculated from the crystal structure suggesting that this loop is dynamic in solution. The loop’s flexibility may contribute to substrate recruitment and product release. Our implementation of pyrite-mediated · OH footprinting is a readily accessible approach to gleaning information about the architecture of small RNA molecules.

  11. Pyrite footprinting of RNA

    Energy Technology Data Exchange (ETDEWEB)

    Schlatterer, Joerg C., E-mail: joerg.schlatterer@einstein.yu.edu [Department of Biochemistry, Albert Einstein College of Medicine, Bronx, NY (United States); Wieder, Matthew S. [Department of Biochemistry, Albert Einstein College of Medicine, Bronx, NY (United States); Jones, Christopher D.; Pollack, Lois [School of Applied and Engineering Physics, Cornell University, Ithaca, NY (United States); Brenowitz, Michael [Department of Biochemistry, Albert Einstein College of Medicine, Bronx, NY (United States)

    2012-08-24

    Highlights: Black-Right-Pointing-Pointer RNA structure is mapped by pyrite mediated {sup {center_dot}}OH footprinting. Black-Right-Pointing-Pointer Repetitive experiments can be done in a powdered pyrite filled cartridge. Black-Right-Pointing-Pointer High {sup {center_dot}}OH reactivity of nucleotides imply dynamic role in Diels-Alderase catalysis. -- Abstract: In RNA, function follows form. Mapping the surface of RNA molecules with chemical and enzymatic probes has revealed invaluable information about structure and folding. Hydroxyl radicals ({sup {center_dot}}OH) map the surface of nucleic acids by cutting the backbone where it is accessible to solvent. Recent studies showed that a microfluidic chip containing pyrite (FeS{sub 2}) can produce sufficient {sup {center_dot}}OH to footprint DNA. The 49-nt Diels-Alder RNA enzyme catalyzes the C-C bond formation between a diene and a dienophile. A crystal structure, molecular dynamics simulation and atomic mutagenesis studies suggest that nucleotides of an asymmetric bulge participate in the dynamic architecture of the ribozyme's active center. Of note is that residue U42 directly interacts with the product in the crystallized RNA/product complex. Here, we use powdered pyrite held in a commercially available cartridge to footprint the Diels-Alderase ribozyme with single nucleotide resolution. Residues C39 to U42 are more reactive to {sup {center_dot}}OH than predicted by the solvent accessibility calculated from the crystal structure suggesting that this loop is dynamic in solution. The loop's flexibility may contribute to substrate recruitment and product release. Our implementation of pyrite-mediated {sup {center_dot}}OH footprinting is a readily accessible approach to gleaning information about the architecture of small RNA molecules.

  12. Single-event burnout of power MOSFET devices for satellite application

    International Nuclear Information System (INIS)

    Xue Yuxiong; Tian Kai; Cao Zhou; Yang Shiyu; Liu Gang; Cai Xiaowu; Lu Jiang

    2008-01-01

    Single-event burnout (SEB) sensitivity was tested for power MOSFET devices, JTMCS081 and JTMCS062, which were made in Institute of Microelectronics, Chinese Academy of Sciences, using californium-252 simulation source. SEB voltage threshold was found for devices under test (DUT). It is helpful for engineers to choose devices used in satellites. (authors)

  13. DORIS data analysis at Geodetic Observatory Pecný using single-satellite and multi-satellite geodetic solutions

    Science.gov (United States)

    Štěpánek, Petr; Douša, Jan; Filler, Vratislav; Hugentobler, Urs

    2010-12-01

    dependence on several factors are discussed. A significant DORIS-GNSS bias was detected when processing SPOT-5 data for the South American stations Santiago, Cachoeira Paulista and Arequipa. The location of these stations is close to the South Atlantic Anomaly (SAA). An important effect of SAA on the DORIS observation noise is well known from Jason-1 data, but it has not been detected for any other satellite yet. Additional tests of the estimated station coordinates and the beacon frequency offsets, based on single-satellite solutions, confirm the possible relation between the SPOT-5 bias and the SAA.

  14. Coarse Initial Orbit Determination for a Geostationary Satellite Using Single-Epoch GPS Measurements

    Directory of Open Access Journals (Sweden)

    Ghangho Kim

    2015-04-01

    Full Text Available A practical algorithm is proposed for determining the orbit of a geostationary orbit (GEO satellite using single-epoch measurements from a Global Positioning System (GPS receiver under the sparse visibility of the GPS satellites. The algorithm uses three components of a state vector to determine the satellite’s state, even when it is impossible to apply the classical single-point solutions (SPS. Through consideration of the characteristics of the GEO orbital elements and GPS measurements, the components of the state vector are reduced to three. However, the algorithm remains sufficiently accurate for a GEO satellite. The developed algorithm was tested on simulated measurements from two or three GPS satellites, and the calculated maximum position error was found to be less than approximately 40 km or even several kilometers within the geometric range, even when the classical SPS solution was unattainable. In addition, extended Kalman filter (EKF tests of a GEO satellite with the estimated initial state were performed to validate the algorithm. In the EKF, a reliable dynamic model was adapted to reduce the probability of divergence that can be caused by large errors in the initial state.

  15. Footprints of domestication revealed by RAD-tag resequencing in loquat: SNP data reveals a non-significant domestication bottleneck and a single domestication event.

    Science.gov (United States)

    Wang, Yunsheng; Shahid, Muhammad Qasim; Lin, Shunquan; Chen, Chengjie; Hu, Chen

    2017-05-06

    The process of crop domestication has long been a major area of research to gain insights into the history of human civilization and to understand the process of evolution. Loquat (Eriobotrya japonica Lindl.) is one of the typical subtropical fruit trees, which was domesticated in China at least 2000 years ago. In the present study, we re-sequenced the genome of nine wild loquat accessions collected from wide geographical range and 10 representative cultivated loquat cultivars by using RAD-tag tacit to exploit the molecular footprints of domestication. We obtained 26.4 Gb clean sequencing data from 19 loquat accessions, with an average of 32.64 M reads per genotype. We identified more than 80,000 SNPs distributed throughout the loquat genome. The SNP density and numbers were slightly higher in the wild loquat populations than that in the cultivated populations. All cultivars were clustered together by structure, phylogenetic and PCA analyses. The modern loquat cultivars have experienced a non-significant genetic bottleneck during domestication, and originated from a single domesticated event. Moreover, our study revealed that Hubei province of China is probably the origin center of cultivated loquat.

  16. Thermal radiation analysis for small satellites with single-node model using techniques of equivalent linearization

    International Nuclear Information System (INIS)

    Anh, N.D.; Hieu, N.N.; Chung, P.N.; Anh, N.T.

    2016-01-01

    Highlights: • Linearization criteria are presented for a single-node model of satellite thermal. • A nonlinear algebraic system for linearization coefficients is obtained. • The temperature evolutions obtained from different methods are explored. • The temperature mean and amplitudes versus the heat capacity are discussed. • The dual criterion approach yields smaller errors than other approximate methods. - Abstract: In this paper, the method of equivalent linearization is extended to the thermal analysis of satellite using both conventional and dual criteria of linearization. These criteria are applied to a differential nonlinear equation of single-node model of the heat transfer of a small satellite in the Low Earth Orbit. A system of nonlinear algebraic equations for linearization coefficients is obtained in the closed form and then solved by the iteration method. The temperature evolution, average values and amplitudes versus the heat capacity obtained by various approaches including Runge–Kutta algorithm, conventional and dual criteria of equivalent linearization, and Grande's approach are compared together. Numerical results reveal that temperature responses obtained from the method of linearization and Grande's approach are quite close to those obtained from the Runge–Kutta method. The dual criterion yields smaller errors than those of the remaining methods when the nonlinearity of the system increases, namely, when the heat capacity varies in the range [1.0, 3.0] × 10 4  J K −1 .

  17. Satellite single-axis attitude determination based on Automatic Dependent Surveillance - Broadcast signals

    Science.gov (United States)

    Zhou, Kaixing; Sun, Xiucong; Huang, Hai; Wang, Xinsheng; Ren, Guangwei

    2017-10-01

    The space-based Automatic Dependent Surveillance - Broadcast (ADS-B) is a new technology for air traffic management. The satellite equipped with spaceborne ADS-B system receives the broadcast signals from aircraft and transfers the message to ground stations, so as to extend the coverage area of terrestrial-based ADS-B. In this work, a novel satellite single-axis attitude determination solution based on the ADS-B receiving system is proposed. This solution utilizes the signal-to-noise ratio (SNR) measurement of the broadcast signals from aircraft to determine the boresight orientation of the ADS-B receiving antenna fixed on the satellite. The basic principle of this solution is described. The feasibility study of this new attitude determination solution is implemented, including the link budget and the access analysis. On this basis, the nonlinear least squares estimation based on the Levenberg-Marquardt method is applied to estimate the single-axis orientation. A full digital simulation has been carried out to verify the effectiveness and performance of this solution. Finally, the corresponding results are processed and presented minutely.

  18. Controls on ERS altimeter measurements over ice sheets: Footprint-scale topography, backscatter fluctuations, and the dependence of microwave penetration depth on satellite orientation

    Science.gov (United States)

    Arthern, R. J.; Wingham, D. J.; Ridout, A. L.

    2001-12-01

    We consider the reliability of radar altimeter measurements of ice sheet elevation and snowpack properties in the presence of surface undulations. We demonstrate that over ice sheets the common practice of averaging echoes by aligning the first return from the surface at the origin can result in a redistribution of power to later times in the average echo, mimicking the effects of microwave penetration into the snowpack. Algorithms that assume the topography affects the radar echo shape in the same way that waves affect altimeter echoes over the ocean will therefore lead to biased estimates of elevation. This assumption will also cause errors in the retrieval of echoshape parameters intended to quantify the penetration of the microwave pulse into the snowpack. Using numerical simulations, we estimate the errors in retrievals of extinction coefficient, surface backscatter, and volume backscatter for various undulating topographies. In the flatter portions of the Antarctic plateau, useful estimates of these parameters may be recovered by averaging altimeter echoes recorded by the European Remote Sensing satellite (ERS-1). By numerical deconvolution of the average echoes we resolve the depths in the snowpack at which temporal changes and satellite travel-direction effects occur, both of which have the potential to corrupt measurements of ice sheet elevation change. The temporal changes are isolated in the surface-backscatter cross section, while directional effects are confined to the extinction coefficient and are stable from year to year. This allows the removal of the directional effect from measurement of ice-sheet elevation change.

  19. Spotting Cheetahs: Identifying Individuals by Their Footprints

    Science.gov (United States)

    Jewell, Zoe C.; Alibhai, Sky K.; Weise, Florian; Munro, Stuart; Van Vuuren, Marlice; Van Vuuren, Rudie

    2016-01-01

    The cheetah (Acinonyx jubatus) is Africa's most endangered large felid and listed as Vulnerable with a declining population trend by the IUCN1. It ranges widely over sub-Saharan Africa and in parts of the Middle East. Cheetah conservationists face two major challenges, conflict with landowners over the killing of domestic livestock, and concern over range contraction. Understanding of the latter remains particularly poor2. Namibia is believed to support the largest number of cheetahs of any range country, around 30%, but estimates range from 2,9053 to 13,5204. The disparity is likely a result of the different techniques used in monitoring. Current techniques, including invasive tagging with VHF or satellite/GPS collars, can be costly and unreliable. The footprint identification technique5 is a new tool accessible to both field scientists and also citizens with smartphones, who could potentially augment data collection. The footprint identification technique analyzes digital images of footprints captured according to a standardized protocol. Images are optimized and measured in data visualization software. Measurements of distances, angles, and areas of the footprint images are analyzed using a robust cross-validated pairwise discriminant analysis based on a customized model. The final output is in the form of a Ward's cluster dendrogram. A user-friendly graphic user interface (GUI) allows the user immediate access and clear interpretation of classification results. The footprint identification technique algorithms are species specific because each species has a unique anatomy. The technique runs in a data visualization software, using its own scripting language (jsl) that can be customized for the footprint anatomy of any species. An initial classification algorithm is built from a training database of footprints from that species, collected from individuals of known identity. An algorithm derived from a cheetah of known identity is then able to classify free

  20. Casting Footprints for Eternity

    Science.gov (United States)

    1999-01-01

    Apollo 11 Astronaut Buzz Aldrin has his footprints casted during the dedication ceremony of the rocket fountain at Building 4200 at Marshall Space Flight Center. The casts of Aldrin's footprints will be placed in the newly constructed Von Braun courtyard representing the accomplishments of the Apollo 11 lunar landing.

  1. Water footprints of nations

    NARCIS (Netherlands)

    Chapagain, Ashok; Hoekstra, Arjen Ysbert

    The water footprint concept has been developed in order to have an indicator of water use in relation to consumption of people. The water footprint of a country is defined as the volume of water needed for the production of the goods and services consumed by the inhabitants of the country. Closely

  2. Changes in satellite cells in human skeletal muscle after a single bout of high intensity exercise

    DEFF Research Database (Denmark)

    Crameri, Regina M; Langberg, Henning; Magnusson, Peter

    2004-01-01

    No studies to date have reported activation of satellite cells in vivo in human muscle after a single bout of high intensity exercise. In this investigation, eight individuals performed a single bout of high intensity exercise with one leg, the contralateral leg being the control. A significant...... increase in mononuclear cells staining for the neural cell adhesion molecule (N-CAM) and fetal antigen 1 (FA1) were observed within the exercised human vastus lateralis muscle on days 4 and 8 post exercise. In addition, a significant increase in the concentration of the FA1 protein was determined...... in the control leg. Despite this increase in N-CAM- and FA1-positive mononuclear cells, an increased expression of myogenin and the neonatal isoform of the myosin heavy chain (MHCn) was not observed. Interestingly, myofibre lesions resulting from extensive damage to the proteins within the myofibre, particularly...

  3. Core-satellites assembly of silver nanoparticles on a single gold nanoparticle via metal ion-mediated complex.

    Science.gov (United States)

    Choi, Inhee; Song, Hyeon Don; Lee, Suseung; Yang, Young In; Kang, Taewook; Yi, Jongheop

    2012-07-25

    We report core-satellites (Au-Ag) coupled plasmonic nanoassemblies based on bottom-up, high-density assembly of molecular-scale silver nanoparticles on a single gold nanoparticle surface, and demonstrate direct observation and quantification of enhanced plasmon coupling (i.e., intensity amplification and apparent spectra shift) in a single particle level. We also explore metal ion sensing capability based on our coupled plasmonic core-satellites, which enabled at least 1000 times better detection limit as compared to that of a single plasmonic nanoparticle. Our results demonstrate and suggest substantial promise for the development of coupled plasmonic nanostructures for ultrasensitive detection of various biological and chemical analytes.

  4. Measuring your Garden Footprint

    OpenAIRE

    Davies, Gareth; Schmutz, Ulrich

    2007-01-01

    The work reports on a Garden Organic (working name of Henry Doubleday Research Association, Coventry UK) members experiment in 2007. Garden Organic members were surveyed with a detailed paper questionnaire to calculate an average gardening footprint of committed (self-selected) organic gardeners in the UK. This was used to develop a garden footprinting methodology and to create a benchmark of committed organic gardening in the UK. This was then compared to commerical orangic growing and to ot...

  5. Statistical properties of single-mode fiber coupling of satellite-to-ground laser links partially corrected by adaptive optics.

    Science.gov (United States)

    Canuet, Lucien; Védrenne, Nicolas; Conan, Jean-Marc; Petit, Cyril; Artaud, Geraldine; Rissons, Angelique; Lacan, Jerome

    2018-01-01

    In the framework of satellite-to-ground laser downlinks, an analytical model describing the variations of the instantaneous coupled flux into a single-mode fiber after correction of the incoming wavefront by partial adaptive optics (AO) is presented. Expressions for the probability density function and the cumulative distribution function as well as for the average fading duration and fading duration distribution of the corrected coupled flux are given. These results are of prime interest for the computation of metrics related to coded transmissions over correlated channels, and they are confronted by end-to-end wave-optics simulations in the case of a geosynchronous satellite (GEO)-to-ground and a low earth orbit satellite (LEO)-to-ground scenario. Eventually, the impact of different AO performances on the aforementioned fading duration distribution is analytically investigated for both scenarios.

  6. Highway carbon footprinting.

    Science.gov (United States)

    2011-09-01

    An effort was undertaken to engage an under-used technology, the TRANSIMS and the MOVES traffic models, in order to advance the utilization of this technology within the state of New York and to examine the value of carbon-footprinting as a metric fo...

  7. Carbon footprint bloembollen 2010

    NARCIS (Netherlands)

    Putten, van der K.; Wildschut, J.

    2011-01-01

    Voor exporteurs en handelaren van leverbare bollen is het in de toekomst mogelijk van belang om aan te kunnen geven wat de carbon footprint (kg CO2 –equivalenten per eenheid) van hun product is. Daarom is een rekenmodel ontwikkeld, waarmee met een minimum aan variabelen op eenvoudige wijze de

  8. Spin motion determination of the Envisat satellite through laser ranging measurements from a single pass measured by a single station

    Science.gov (United States)

    Pittet, Jean-Noël; Šilha, Jiří; Schildknecht, Thomas

    2018-02-01

    The Satellite Laser Ranging (SLR) technology is used to accurately determine the position of space objects equipped with so-called retro-reflectors or retro-reflector arrays (RRA). This type of measurement allows to measure the range to the spacecraft with high precision, which leads to determination of very accurate orbits for these targets. Non-active spacecraft, which are not attitude controlled any longer, tend to start to spin or tumble under influence of the external and internal torques and forces. If the return signal is measured for a non-spherical non-active rotating object, the signal in the range residuals with respect to the reference orbit is more complex. For rotating objects the return signal shows an oscillating pattern or patterns caused by the RRA moving around the satellite's centre of mass. This behaviour is projected onto the radial component measured by the SLR. In our work, we demonstrate how the SLR ranging technique from one sensor to a satellite equipped with a RRA can be used to precisely determine its spin motion during one passage. Multiple SLR measurements of one target over time allow to accurately monitor spin motion changes which can be further used for attitude predictions. We show our solutions of the spin motion determined for the non-active ESA satellite Envisat obtained from measurements acquired during years 2013-2015 by the Zimmerwald SLR station, Switzerland. All the necessary parameters are defined for our own so-called point-like model which describes the motion of a point in space around the satellite centre of mass.

  9. Application of Single-Mode Fiber-Coupled Receivers in Optical Satellite to High-Altitude Platform Communications

    Directory of Open Access Journals (Sweden)

    Fidler Franz

    2008-01-01

    Full Text Available Abstract In a free-space optical communication system employing fiber-optic components, the phasefront distortions induced by atmospheric turbulence limit the efficiency with which the laser beam is coupled into a single-mode fiber. We analyze different link scenarios including a geostationary (GEO satellite, a high-altitude platform (HAP, and an optical ground station (OGS. Single-mode coupled optically preamplified receivers allow for efficient suppression of background noise and highly sensitive detection. While GEO-to-OGS communication suffers from atmospheric turbulence, we demonstrate that GEO-to-HAP communication allows for close to diffraction-limited performance when applying tip-tilt correction.

  10. Application of Single-Mode Fiber-Coupled Receivers in Optical Satellite to High-Altitude Platform Communications

    Directory of Open Access Journals (Sweden)

    Oswald Wallner

    2008-05-01

    Full Text Available In a free-space optical communication system employing fiber-optic components, the phasefront distortions induced by atmospheric turbulence limit the efficiency with which the laser beam is coupled into a single-mode fiber. We analyze different link scenarios including a geostationary (GEO satellite, a high-altitude platform (HAP, and an optical ground station (OGS. Single-mode coupled optically preamplified receivers allow for efficient suppression of background noise and highly sensitive detection. While GEO-to-OGS communication suffers from atmospheric turbulence, we demonstrate that GEO-to-HAP communication allows for close to diffraction-limited performance when applying tip-tilt correction.

  11. Dynamic footprint measurement collection technique and intrarater reliability: ink mat, paper pedography, and electronic pedography.

    Science.gov (United States)

    Fascione, Jeanna M; Crews, Ryan T; Wrobel, James S

    2012-01-01

    Identifying the variability of footprint measurement collection techniques and the reliability of footprint measurements would assist with appropriate clinical foot posture appraisal. We sought to identify relationships between these measures in a healthy population. On 30 healthy participants, midgait dynamic footprint measurements were collected using an ink mat, paper pedography, and electronic pedography. The footprints were then digitized, and the following footprint indices were calculated with photo digital planimetry software: footprint index, arch index, truncated arch index, Chippaux-Smirak Index, and Staheli Index. Differences between techniques were identified with repeated-measures analysis of variance with post hoc test of Scheffe. In addition, to assess practical similarities between the different methods, intraclass correlation coefficients (ICCs) were calculated. To assess intrarater reliability, footprint indices were calculated twice on 10 randomly selected ink mat footprint measurements, and the ICC was calculated. Dynamic footprint measurements collected with an ink mat significantly differed from those collected with paper pedography (ICC, 0.85-0.96) and electronic pedography (ICC, 0.29-0.79), regardless of the practical similarities noted with ICC values (P = .00). Intrarater reliability for dynamic ink mat footprint measurements was high for the footprint index, arch index, truncated arch index, Chippaux-Smirak Index, and Staheli Index (ICC, 0.74-0.99). Footprint measurements collected with various techniques demonstrate differences. Interchangeable use of exact values without adjustment is not advised. Intrarater reliability of a single method (ink mat) was found to be high.

  12. The singly averaged differential equations of satellite motion for e greater than or equal to 0 and less than 1

    Science.gov (United States)

    Dallas, S. S.; Khan, I.

    1976-01-01

    The singly-averaged differential equations of motion of a satellite are developed in terms of parameters valid for all eccentricities less than one. The perturbations included in the acceleration model are due to an aspherical central planet (zonal harmonics up to degree 20 and resonant harmonics up to degree and order 20), atmospheric drag for a time-varying atmosphere, third-body gravity (the sun and moon for an earth satellite), solar radiation pressure with shadowing, and impulsive maneuvers. Analytic averaging is used to remove short-period terms due to the aspherical central planet and third-body gravity. Numerical averaging is used to remove short-period terms due to atmospheric drag and solar radiation pressure.

  13. Optimizing Workflow Data Footprint

    Directory of Open Access Journals (Sweden)

    Gurmeet Singh

    2007-01-01

    Full Text Available In this paper we examine the issue of optimizing disk usage and scheduling large-scale scientific workflows onto distributed resources where the workflows are data-intensive, requiring large amounts of data storage, and the resources have limited storage resources. Our approach is two-fold: we minimize the amount of space a workflow requires during execution by removing data files at runtime when they are no longer needed and we demonstrate that workflows may have to be restructured to reduce the overall data footprint of the workflow. We show the results of our data management and workflow restructuring solutions using a Laser Interferometer Gravitational-Wave Observatory (LIGO application and an astronomy application, Montage, running on a large-scale production grid-the Open Science Grid. We show that although reducing the data footprint of Montage by 48% can be achieved with dynamic data cleanup techniques, LIGO Scientific Collaboration workflows require additional restructuring to achieve a 56% reduction in data space usage. We also examine the cost of the workflow restructuring in terms of the application's runtime.

  14. Hydropower's Biogenic Carbon Footprint.

    Science.gov (United States)

    Scherer, Laura; Pfister, Stephan

    2016-01-01

    Global warming is accelerating and the world urgently needs a shift to clean and renewable energy. Hydropower is currently the largest renewable source of electricity, but its contribution to climate change mitigation is not yet fully understood. Hydroelectric reservoirs are a source of biogenic greenhouse gases and in individual cases can reach the same emission rates as thermal power plants. Little is known about the severity of their emissions at the global scale. Here we show that the carbon footprint of hydropower is far higher than previously assumed, with a global average of 173 kg CO2 and 2.95 kg CH4 emitted per MWh of electricity produced. This results in a combined average carbon footprint of 273 kg CO2e/MWh when using the global warming potential over a time horizon of 100 years (GWP100). Nonetheless, this is still below that of fossil energy sources without the use of carbon capture and sequestration technologies. We identified the dams most promising for capturing methane for use as alternative energy source. The spread among the ~1500 hydropower plants analysed in this study is large and highlights the importance of case-by-case examinations.

  15. Hydropower's Biogenic Carbon Footprint.

    Directory of Open Access Journals (Sweden)

    Laura Scherer

    Full Text Available Global warming is accelerating and the world urgently needs a shift to clean and renewable energy. Hydropower is currently the largest renewable source of electricity, but its contribution to climate change mitigation is not yet fully understood. Hydroelectric reservoirs are a source of biogenic greenhouse gases and in individual cases can reach the same emission rates as thermal power plants. Little is known about the severity of their emissions at the global scale. Here we show that the carbon footprint of hydropower is far higher than previously assumed, with a global average of 173 kg CO2 and 2.95 kg CH4 emitted per MWh of electricity produced. This results in a combined average carbon footprint of 273 kg CO2e/MWh when using the global warming potential over a time horizon of 100 years (GWP100. Nonetheless, this is still below that of fossil energy sources without the use of carbon capture and sequestration technologies. We identified the dams most promising for capturing methane for use as alternative energy source. The spread among the ~1500 hydropower plants analysed in this study is large and highlights the importance of case-by-case examinations.

  16. A better carbon footprint label

    DEFF Research Database (Denmark)

    Thøgersen, John; Nielsen, Kristian S.

    2016-01-01

    Based on insights from behavioral economics, it is suggested to extend carbon footprint labeling with information about relative performance, using the well-known “traffic light” color scheme to communicate relative performance. To test this proposition, the impact of a carbon footprint label......, participants saw the original Carbon Trust label and in the other condition they saw the same label, but with traffic light colors added to communicate the product’s relative performance in terms of carbon footprint. All included attributes were found to have a significant impact on consumer choices...... to indicate relative carbon footprint significantly increases carbon label effectiveness. Hence, a carbon footprint label is more effective if it uses traffic light colors to communicate the product’s relative performance....

  17. Estimate Landslide Volume with Genetic Algorithms and Image Similarity Method from Single Satellite Image

    Science.gov (United States)

    Yu, Ting-To

    2013-04-01

    It is important to acquire the volume of landslide in short period of time. For hazard mitigation and also emergency response purpose, the traditional method takes much longer time than expected. Due to the weather limit, traffic accessibility and many regulations of law, it take months to handle these process before the actual carry out of filed work. Remote sensing imagery can get the data as long as the visibility allowed, which happened only few day after the event. While traditional photometry requires a stereo pairs images to produce the post event DEM for calculating the change of volume. Usually have to wait weeks or even months for gathering such data, LiDAR or ground GPS measurement might take even longer period of time with much higher cost. In this study we use one post event satellite image and pre-event DTM to compare the similarity between these by alter the DTM with genetic algorithms. The outcome of smartest guess from GAs shall remove or add exact values of height at each location, which been converted into shadow relief viewgraph to compare with satellite image. Once the similarity threshold been make then the guessing work stop. It takes only few hours to finish the entire task, the computed accuracy is around 70% by comparing to the high resolution LiDAR survey at a landslide, southern Taiwan. With extra GCPs, the estimate accuracy can improve to 85% and also within few hours after the receiving of satellite image. Data of this demonstration case is a 5 m DTM at 2005, 2M resolution FormoSat optical image at 2009 and 5M LiDAR at 2010. The GAs and image similarity code is developed on Matlab at windows PC.

  18. Review of water footprint components of grain

    Science.gov (United States)

    Ahmad, Wan Amiza Amneera Wan; Meriam Nik Sulaiman, Nik; Zalina Mahmood, Noor

    2017-06-01

    Burgeoning global population, economic development, agriculture and prevailing climate pattern are among aspects contributed to water scarcity. In low and middle income countries, agriculture takes the highest share among water user sector. Demand for grain is widespread all over the globe. Hence, this study review published papers regarding quantification of water footprint of grain. Review shows there are various methods in quantifying water footprint. In ascertaining water footprint, three (green, blue, grey) or two (green, blue) components of water footprint involved. However, there was a study introduced new term in evaluating water footprint, white water footprint. The vulnerability of varying methods is difficulty in conducting comparative among water footprint. Salient source in contributing high water footprint also varies. In some studies, green water footprint play major role. Conversely, few studies found out blue water footprint most contributing component in water footprint. This fluctuate pattern influenced by various aspects, namely, regional climatic characteristics, crop yield and crop types.

  19. Skallerup Klit's carbon footprint

    DEFF Research Database (Denmark)

    Zacho, Kristina Overgaard; Ørnstrup, Niels Holm; Zimmermann, Tine Marquard

    by offsetting and without making actual emission reductions. Therefore the purpose of this study is to present recommendations on how Skallerup Klit can build up their business strategy using Carbon Footprint (CFP) as a tool. The CPF is calculated and assessed by using financial data in an Input-output LCA......Skallerup Klit is a Danish holiday center certified as CO2 neutral. They use this label for branding as them selves as the first CO2 neutral holiday center in Denmark. There are reasons to question how ambitious “CO2 neutrality” as a strategy is, because this goal can be reached rather easily....... For the LCA the system boundaries of the assessment of Skallerup Klit´s CFP are defined to include both direct and indirect emissions from the supply chain and from transportation and food eaten at the holiday center. Scenarios are conducted to illustrate where the greatest emission reductions are possible...

  20. An Integrated Tool for Calculating and Reducing Institution Carbon and Nitrogen Footprints

    Science.gov (United States)

    Galloway, James N.; Castner, Elizabeth A.; Andrews, Jennifer; Leary, Neil; Aber, John D.

    2017-01-01

    Abstract The development of nitrogen footprint tools has allowed a range of entities to calculate and reduce their contribution to nitrogen pollution, but these tools represent just one aspect of environmental pollution. For example, institutions have been calculating their carbon footprints to track and manage their greenhouse gas emissions for over a decade. This article introduces an integrated tool that institutions can use to calculate, track, and manage their nitrogen and carbon footprints together. It presents the methodology for the combined tool, describes several metrics for comparing institution nitrogen and carbon footprint results, and discusses management strategies that reduce both the nitrogen and carbon footprints. The data requirements for the two tools overlap substantially, although integrating the two tools does necessitate the calculation of the carbon footprint of food. Comparison results for five institutions suggest that the institution nitrogen and carbon footprints correlate strongly, especially in the utilities and food sectors. Scenario analyses indicate benefits to both footprints from a range of utilities and food footprint reduction strategies. Integrating these two footprints into a single tool will account for a broader range of environmental impacts, reduce data entry and analysis, and promote integrated management of institutional sustainability. PMID:29350217

  1. Mapping the carbon footprint of EU regions

    Science.gov (United States)

    Ivanova, Diana; Vita, Gibran; Steen-Olsen, Kjartan; Stadler, Konstantin; Melo, Patricia C.; Wood, Richard; Hertwich, Edgar G.

    2017-05-01

    While the EU Commission has encouraged Member States to combine national and international climate change mitigation measures with subnational environmental policies, there has been little harmonized effort towards the quantification of embodied greenhouse gas (GHG) emissions from household consumption across European regions. This study develops an inventory of carbon footprints associated with household consumption for 177 regions in 27 EU countries, thus, making a key contribution for the incorporation of consumption-based accounting into local decision-making. Footprint calculations are based on consumer expenditure surveys and environmental and trade detail from the EXIOBASE 2.3 multiregional input-output database describing the world economy in 2007 at the detail of 43 countries, 5 rest-of-the-world regions and 200 product sectors. Our analysis highlights the spatial heterogeneity of embodied GHG emissions within multiregional countries with subnational ranges varying widely between 0.6 and 6.5 tCO2e/cap. The significant differences in regional contribution in terms of total and per capita emissions suggest notable differences with regards to climate change responsibility. The study further provides a breakdown of regional emissions by consumption categories (e.g. housing, mobility, food). In addition, our region-level study evaluates driving forces of carbon footprints through a set of socio-economic, geographic and technical factors. Income is singled out as the most important driver for a region’s carbon footprint, although its explanatory power varies significantly across consumption domains. Additional factors that stand out as important on the regional level include household size, urban-rural typology, level of education, expenditure patterns, temperature, resource availability and carbon intensity of the electricity mix. The lack of cross-national region-level studies has so far prevented analysts from drawing broader policy conclusions that hold

  2. Sea ice local surface topography from single-pass satellite InSAR measurements: a feasibility study

    Directory of Open Access Journals (Sweden)

    W. Dierking

    2017-08-01

    Full Text Available Quantitative parameters characterizing the sea ice surface topography are needed in geophysical investigations such as studies on atmosphere–ice interactions or sea ice mechanics. Recently, the use of space-borne single-pass interferometric synthetic aperture radar (InSAR for retrieving the ice surface topography has attracted notice among geophysicists. In this paper the potential of InSAR measurements is examined for several satellite configurations and radar frequencies, considering statistics of heights and widths of ice ridges as well as possible magnitudes of ice drift. It is shown that, theoretically, surface height variations can be retrieved with relative errors  ≤  0.5 m. In practice, however, the sea ice drift and open water leads may contribute significantly to the measured interferometric phase. Another essential factor is the dependence of the achievable interferometric baseline on the satellite orbit configurations. Possibilities to assess the influence of different factors on the measurement accuracy are demonstrated: signal-to-noise ratio, presence of a snow layer, and the penetration depth into the ice. Practical examples of sea surface height retrievals from bistatic SAR images collected during the TanDEM-X Science Phase are presented.

  3. Aerosol single scattering albedo estimated across China from a combination of ground and satellite measurements

    Science.gov (United States)

    Kwon Ho Lee; Zhanqing Li; Man Sing Wong; Jinyuan Xin; Wang Yuesi; Wei Min Hao; Fengsheng Zhao

    2007-01-01

    Single scattering albedo (SSA) governs the strength of aerosols in absorbing solar radiation, but few methods are available to directly measure this important quantity. There currently exist many ground-based measurements of spectral transmittance from which aerosol optical thickness (AOT) are retrieved under clear sky conditions. Reflected radiances at the top of the...

  4. Progress and Prospects for Tourism Footprint Research

    OpenAIRE

    Shuxin Wang; Yiyuan Hu; Hong He; Genxu Wang

    2017-01-01

    The tourism footprint family comprises the tourism ecological footprint (TEF), the tourism carbon footprint (TCF) and the tourism water footprint (TWF). The tourism footprint represents an important tool for quantitatively assessing the impact of tourism activities on the ecosystem of a tourist destination. This paper systematically reviews the relevant literature on TEF, TCF and TWF, analyses and summarizes the main progress and failures in the analytical frameworks, research methods, measur...

  5. City Carbon Footprint Networks

    Directory of Open Access Journals (Sweden)

    Guangwu Chen

    2016-07-01

    Full Text Available Progressive cities worldwide have demonstrated political leadership by initiating meaningful strategies and actions to tackle climate change. However, the lack of knowledge concerning embodied greenhouse gas (GHG emissions of cities has hampered effective mitigation. We analyse trans-boundary GHG emission transfers between five Australian cities and their trading partners, with embodied emission flows broken down into major economic sectors. We examine intercity carbon footprint (CF networks and disclose a hierarchy of responsibility for emissions between cities and regions. Allocations of emissions to households, businesses and government and the carbon efficiency of expenditure have been analysed to inform mitigation policies. Our findings indicate that final demand in the five largest cities in Australia accounts for more than half of the nation’s CF. City households are responsible for about two thirds of the cities’ CFs; the rest can be attributed to government and business consumption and investment. The city network flows highlight that over half of emissions embodied in imports (EEI to the five cities occur overseas. However, a hierarchy of GHG emissions reveals that overseas regions also outsource emissions to Australian cities such as Perth. We finally discuss the implications of our findings on carbon neutrality, low-carbon city concepts and strategies and allocation of subnational GHG responsibility.

  6. FLORIDA TOWER FOOTPRINT EXPERIMENTS

    Energy Technology Data Exchange (ETDEWEB)

    WATSON,T.B.; DIETZ, R.N.; WILKE, R.; HENDREY, G.; LEWIN, K.; NAGY, J.; LECLERC, M.

    2007-01-01

    The Florida Footprint experiments were a series of field programs in which perfluorocarbon tracers were released in different configurations centered on a flux tower to generate a data set that can be used to test transport and dispersion models. These models are used to determine the sources of the CO{sub 2} that cause the fluxes measured at eddy covariance towers. Experiments were conducted in a managed slash pine forest, 10 km northeast of Gainesville, Florida, in 2002, 2004, and 2006 and in atmospheric conditions that ranged from well mixed, to very stable, including the transition period between convective conditions at midday to stable conditions after sun set. There were a total of 15 experiments. The characteristics of the PFTs, details of sampling and analysis methods, quality control measures, and analytical statistics including confidence limits are presented. Details of the field programs including tracer release rates, tracer source configurations, and configuration of the samplers are discussed. The result of this experiment is a high quality, well documented tracer and meteorological data set that can be used to improve and validate canopy dispersion models.

  7. Progress and Prospects for Tourism Footprint Research

    Directory of Open Access Journals (Sweden)

    Shuxin Wang

    2017-10-01

    Full Text Available The tourism footprint family comprises the tourism ecological footprint (TEF, the tourism carbon footprint (TCF and the tourism water footprint (TWF. The tourism footprint represents an important tool for quantitatively assessing the impact of tourism activities on the ecosystem of a tourist destination. This paper systematically reviews the relevant literature on TEF, TCF and TWF, analyses and summarizes the main progress and failures in the analytical frameworks, research methods, measurement results, environmental impacts and reductions in the tourism footprint. This paper also proposes areas for further developing the tourism footprint research, including unifying the analytical frameworks and boundaries of the tourism footprint, distinguishing the geographical scope of the tourism footprint effectively, improving the process of analyzing the environmental impact of the tourism footprint, measuring the tourism footprint scientifically and roundly, performing space-time calculations of the tourism footprint, and expanding the tourism footprint family by introducing new members. Accordingly, this paper is devoted to the continued study of the tourism footprint.

  8. Development of My Footprint Calculator

    Science.gov (United States)

    Mummidisetti, Karthik

    The Environmental footprint is a very powerful tool that helps an individual to understand how their everyday activities are impacting environmental surroundings. Data shows that global climate change, which is a growing concern for nations all over the world, is already affecting humankind, plants and animals through raising ocean levels, droughts & desertification and changing weather patterns. In addition to a wide range of policy measures implemented by national and state governments, it is necessary for individuals to understand the impact that their lifestyle may have on their personal environmental footprint, and thus over the global climate change. "My Footprint Calculator" (myfootprintcalculator.com) has been designed to be one the simplest, yet comprehensive, web tools to help individuals calculate and understand their personal environmental impact. "My Footprint Calculator" is a website that queries users about their everyday habits and activities and calculates their personal impact on the environment. This website was re-designed to help users determine their environmental impact in various aspects of their lives ranging from transportation and recycling habits to water and energy usage with the addition of new features that will allow users to share their experiences and their best practices with other users interested in reducing their personal Environmental footprint. The collected data is stored in the database and a future goal of this work plans to analyze the collected data from all users (anonymously) for developing relevant trends and statistics.

  9. First perissodactyl footprints from Flysch deposits of the Barail Group ...

    Indian Academy of Sciences (India)

    Two pes imprints of a perissodactyl mammal constituting a single step of a trackway have recently been discovered in Oligocene Flysch deposits of the Barail Group in Manipur, India. The tridactyl, mesaxonic imprints (∼7 cm in length) show strong similarities to footprints known from the Paleogene of China and can be ...

  10. A Better Carbon Footprint Label

    DEFF Research Database (Denmark)

    Thøgersen, John; Nielsen, Kristian S.

    2016-01-01

    Based on insights from behavioral economics, it is suggested to extend carbon footprint labeling with information about relative performance, using the well-known “traffic light” color scheme to communicate relative performance. To test this proposition, the impact of a carbon footprint label...... on Danish consumers' choice of ground coffee was tested in a 3 price levels × 3 levels of carbon emission × 3 certifying organizations × 2 organic labeling conditions discrete choice experiment. Participants were randomly assigned to two slightly different variants of the experiment: In one condition......, participants saw the original Carbon Trust label and in the other condition they saw the same label, but with traffic light colors added to communicate the product's relative performance in terms of carbon footprint. All included attributes were found to have a significant impact on consumer choices...

  11. Mathematical Footprints Discovering Mathematics Everywhere

    CERN Document Server

    Pappas, Theoni

    1999-01-01

    MATHEMATICAL FOOTPRINTS takes a creative look at the role mathematics has played since prehistoric times, and will play in the future, and uncovers mathematics where you least expect to find it from its many uses in medicine, the sciences, and its appearance in art to its patterns in nature and its central role in the development of computers. Pappas presents mathematical ideas in a readable non-threatening manner. MATHEMATICAL FOOTPRINTS is another gem by the creator of THE MATHEMATICS CALENDAR and author of THE JOY OF MATHEMATICS. "Pappas's books have been gold mines of mathematical ent

  12. Modeling satellite-Earth quantum channel downlinks with adaptive-optics coupling to single-mode fibers

    Science.gov (United States)

    Gruneisen, Mark T.; Flanagan, Michael B.; Sickmiller, Brett A.

    2017-12-01

    The efficient coupling of photons from a free-space quantum channel into a single-mode optical fiber (SMF) has important implications for quantum network concepts involving SMF interfaces to quantum detectors, atomic systems, integrated photonics, and direct coupling to a fiber network. Propagation through atmospheric turbulence, however, leads to wavefront errors that degrade mode matching with SMFs. In a free-space quantum channel, this leads to photon losses in proportion to the severity of the aberration. This is particularly problematic for satellite-Earth quantum channels, where atmospheric turbulence can lead to significant wavefront errors. This report considers propagation from low-Earth orbit to a terrestrial ground station and evaluates the efficiency with which photons couple either through a circular field stop or into an SMF situated in the focal plane of the optical receiver. The effects of atmospheric turbulence on the quantum channel are calculated numerically and quantified through the quantum bit error rate and secure key generation rates in a decoy-state BB84 protocol. Numerical simulations include the statistical nature of Kolmogorov turbulence, sky radiance, and an adaptive-optics system under closed-loop control.

  13. Human appropriation of natural capital: a comparison of ecological footprint and water footprint analysis

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert

    2009-01-01

    The water footprint concept introduced in 2002 is an analogue of the ecological footprint concept originating from the 1990s. Whereas the ecological footprint (EF) denotes the bioproductive area (hectares) needed to sustain a population, the water footprint (WF) represents the freshwater volume

  14. Ecological Footprints in transnational media

    DEFF Research Database (Denmark)

    Petersen, Lars Kjerulf

    2013-01-01

    planning in administrative bodies to broadcast media reporting how countries are ranked in the newest index of corruption, wealth, or happiness. The question this paper rises is how sustainable development indicators, and more specifically the Ecological Footprint is represented and at work in public media...

  15. What Is My Carbon Footprint?

    Science.gov (United States)

    Galluzzo, Benjamin J.; McGivney-Burelle, Jean; Wagstrom, Rikki B.

    2016-01-01

    Human beings are having a profound impact on the environment. The opportunity to investigate this timely issue during one or two class periods gives algebra and precalculus students insight into a sustainability topic of great international concern--carbon footprints. Students use mathematical thinking in matters that are pertinent to their…

  16. Water Footprint Symposium: where next for water footprint and water assessment methodology?

    OpenAIRE

    Tillotson, MR; Liu, J; Guan, D; Wu, P; Zhao, X; Zhang, G; Pfister, S; Pahlow, M

    2014-01-01

    Recognizing the need for a comprehensive review of the tools and metrics for the quantification and assessment of water footprints, and allowing for the opportunity for open discussion on the challenges and future of water footprinting methodology, an international symposium on water footprint was organized. The Water Footprint Symposium was held in December 2013 at the University of Leeds, UK. In particular, four areas were highlighted for discussion: water footprint and agriculture, quantif...

  17. Research on modeling of the agile satellite using a single gimbal magnetically suspended CMG and the disturbance feedforward compensation for rotors.

    Science.gov (United States)

    Cui, Peiling; Yan, Ning

    2012-12-12

    The magnetically suspended Control Moment Gyroscope (CMG) has the advantages of long-life, micro-vibration and being non-lubricating, and is the ideal actuator for agile maneuver satellite attitude control. However, the stability of the rotor in magnetic bearing and the precision of the output torque of a magnetically suspended CMG are affected by the rapid maneuvers of satellites. In this paper, a dynamic model of the agile satellite including a magnetically suspended single gimbal control moment gyroscope is built and the equivalent disturbance torque effected on the rotor is obtained. The feedforward compensation control method is used to depress the disturbance on the rotor. Simulation results are given to show that the rotor displacement is obviously reduced.

  18. Research on Modeling of the Agile Satellite Using a Single Gimbal Magnetically Suspended CMG and the Disturbance Feedforward Compensation for Rotors

    Directory of Open Access Journals (Sweden)

    Ning Yan

    2012-12-01

    Full Text Available The magnetically suspended Control Moment Gyroscope (CMG has the advantages of long-life, micro-vibration and being non-lubricating, and is the ideal actuator for agile maneuver satellite attitude control. However, the stability of the rotor in magnetic bearing and the precision of the output torque of a magnetically suspended CMG are affected by the rapid maneuvers of satellites. In this paper, a dynamic model of the agile satellite including a magnetically suspended single gimbal control moment gyroscope is built and the equivalent disturbance torque effected on the rotor is obtained. The feedforward compensation control method is used to depress the disturbance on the rotor. Simulation results are given to show that the rotor displacement is obviously reduced.

  19. Carbon Footprint of Beef Cattle

    Directory of Open Access Journals (Sweden)

    Jim Dyer

    2012-12-01

    Full Text Available The carbon footprint of beef cattle is presented for Canada, The United States, The European Union, Australia and Brazil. The values ranged between 8 and 22 kg CO2e per kg of live weight (LW depending on the type of farming system, the location, the year, the type of management practices, the allocation, as well as the boundaries of the study. Substantial reductions have been observed for most of these countries in the last thirty years. For instance, in Canada the mean carbon footprint of beef cattle at the exit gate of the farm decreased from 18.2 kg CO2e per kg LW in 1981 to 9.5 kg CO2e per kg LW in 2006 mainly because of improved genetics, better diets, and more sustainable land management practices. Cattle production results in products other than meat, such as hides, offal and products for rendering plants; hence the environmental burden must be distributed between these useful products. In order to do this, the cattle carbon footprint needs to be reported in kg of CO2e per kg of product. For example, in Canada in 2006, on a mass basis, the carbon footprint of cattle by-products at the exit gate of the slaughterhouse was 12.9 kg CO2e per kg of product. Based on an economic allocation, the carbon footprints of meat (primal cuts, hide, offal and fat, bones and other products for rendering were 19.6, 12.3, 7 and 2 kg CO2e per kg of product, respectively.

  20. Single amino acid change in the helicase domain of the putative RNA replicase of turnip crinkle virus alters symptom intensification by virulent satellites.

    Science.gov (United States)

    Collmer, C W; Stenzler, L; Chen, X; Fay, N; Hacker, D; Howell, S H

    1992-01-01

    The virulent satellite [satellite C (sat C)] of turnip crinkle virus (TCV) is a small pathogenic RNA that intensifies symptoms in TCV-infected turnip plants (Brassica campestris). The virulence of sat C is determined by properties of the satellite itself and is influenced by the helper virus. Symptoms produced in infections with sat C differ in severity depending on the helper virus. The TCV-JI helper virus produces more severe symptoms than the TCV-B helper virus when inoculated with sat C. To find determinants in the TCV helper virus genome that affect satellite virulence, the TCV-JI genome was cloned and the sequence compared to the TCV-B genome. The genomes were found to differ by only five base changes, and only one of the base changes, at nucleotide position 1025, produced an amino acid change, an aspartic acid----glycine in the putative viral replicase. A chimeric TCV genome (TCV-B/JI) containing four of the five base changes (including the base change at position 1025) and a mutant TCV-B genome (TCV-B1025G) containing a single base substitution at position 1025 converted the TCV-B genome into a form that produces severe symptoms with sat C. The base change a position 1025 is located in the helicase of the putative viral replicase, and symptom intensification appears to result from differences in the rate of replication of the satellite supported by the two helper viruses. Images PMID:1370351

  1. Quantifying the human impact on water resources: a critical review of the water footprint concept

    Science.gov (United States)

    Chenoweth, J.; Hadjikakou, M.; Zoumides, C.

    2014-06-01

    The water footprint is a consumption-based indicator of water use, referring to the total volume of freshwater used directly and indirectly by a nation or a company, or in the provision of a product or service. Despite widespread enthusiasm for the development and use of water footprints, some concerns have been raised about the concept and its usefulness. A variety of methodologies have been developed for water footprinting which differ with respect to how they deal with different forms of water use. The result is water footprint estimates which vary dramatically, often creating confusion. Despite these methodological qualms, the concept has had notable success in raising awareness about water use in agricultural and industrial supply chains, by providing a previously unavailable and (seemingly) simple numerical indicator of water use. Nevertheless, and even though a range of uses have already been suggested for water footprinting, its policy value remains unclear. Unlike the carbon footprint which provides a universal measure of human impact on the atmosphere's limited absorptive capacity, the water footprint in its conventional form solely quantifies a single production input without any accounting of the impacts of use, which vary spatially and temporally. Following an extensive review of the literature related to water footprints, this paper critically examines the present uses of the concept, focusing on its current strengths, shortcomings and promising research avenues to advance it.

  2. Carbon footprinting of electronic products

    International Nuclear Information System (INIS)

    Vasan, Arvind; Sood, Bhanu; Pecht, Michael

    2014-01-01

    Highlights: • Challenges in adopting existing CF standards for electronic products are discussed. • Carbon footprint of electronic products is underestimated using existing standards. • Multipronged approach is presented to overcome the identified challenges. • Multipronged approach demonstrated on commercial and military grade DC–DC converter system. - Abstract: In order to mitigate the effects of global warming, companies are being compelled by governments, investors, and customers to control their greenhouse gas (GHG) emissions. Similar to the European Union’s legislation on the airline industry, legislation is expected to require the electronics industry to assess their product’s carbon footprint before sale or use, as the electronics industry’s contribution to global GHG emissions is comparable to the airline industry’s contribution. Thus, it is necessary for members of the electronics industry to assess their current GHG emission rates and identify methods to reduce environmental impacts. Organizations use Carbon Footprint (CF) analysis methods to identify and quantify the GHG emissions associated with the life cycle stages of their product or services. This paper discusses the prevailing methods used by organizations to estimate the CF of their electronics products and identifies the challenges faced by the electronics industry when adopting these methods in an environment of decreasing product development cycles with complex and diffuse supply chains. We find that, as a result of the inconsistencies arising from the system boundary selection methods and databases, the use of outdated LCA approaches, and the lack of supplier’s emissions-related data, the CFs of electronic products are typically underestimated. To address these challenges, we present a comprehensive approach to the carbon footprinting of electronic products that involves the use of product-group-oriented standards, hybrid life cycle assessment techniques, and the

  3. Carbon footprint: current methods of estimation.

    Science.gov (United States)

    Pandey, Divya; Agrawal, Madhoolika; Pandey, Jai Shanker

    2011-07-01

    Increasing greenhouse gaseous concentration in the atmosphere is perturbing the environment to cause grievous global warming and associated consequences. Following the rule that only measurable is manageable, mensuration of greenhouse gas intensiveness of different products, bodies, and processes is going on worldwide, expressed as their carbon footprints. The methodologies for carbon footprint calculations are still evolving and it is emerging as an important tool for greenhouse gas management. The concept of carbon footprinting has permeated and is being commercialized in all the areas of life and economy, but there is little coherence in definitions and calculations of carbon footprints among the studies. There are disagreements in the selection of gases, and the order of emissions to be covered in footprint calculations. Standards of greenhouse gas accounting are the common resources used in footprint calculations, although there is no mandatory provision of footprint verification. Carbon footprinting is intended to be a tool to guide the relevant emission cuts and verifications, its standardization at international level are therefore necessary. Present review describes the prevailing carbon footprinting methods and raises the related issues.

  4. Land, carbon and water footprints in Taiwan

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yung-Jaan, E-mail: yungjaanlee@gmail.com

    2015-09-15

    The consumer responsibility approach uses footprints as indicators of the total direct and indirect effects of a product or consumption activity. This study used a time-series analysis of three environmental pressures to quantify the total environmental pressures caused by consumption in Taiwan: land footprint, carbon footprint, and water footprint. Land footprint is the pressure from appropriation of biologically productive land and water area. Carbon footprint is the pressure from greenhouse gas emissions. Water footprint is the pressure from freshwater consumption. Conventional carbon footprint is the total CO{sub 2} emitted by a certain activity or the CO{sub 2} accumulation during a product life cycle. This definition cannot be used to convert CO{sub 2} emissions into land units. This study responds to the needs of “CO{sub 2} land” in the footprint family by applying the carbon footprint concept used by GFN. The analytical results showed that consumption by the average Taiwan citizen in 2000 required appropriation of 5.39 gha (hectares of land with global-average biological productivity) and 3.63 gha in 2011 in terms of land footprint. The average Taiwan citizen had a carbon footprint of 3.95 gha in 2000 and 5.94 gha in 2011. These results indicate that separately analyzing the land and carbon footprints enables their trends to be compared and appropriate policies and strategies for different sectors to be proposed accordingly. The average Taiwan citizen had a blue water footprint of 801 m{sup 3} in 2000 and 784 m{sup 3} in 2011. By comparison, their respective global averages were 1.23 gha, 2.36 gha and 163 m{sup 3} blue water in 2011, respectively. Overall, Taiwan revealed higher environmental pressures compared to the rest of the world, demonstrating that Taiwan has become a high footprint state and has appropriated environmental resources from other countries. That is, through its imports of products with embodied pressures and its exports, Taiwan has

  5. Land, carbon and water footprints in Taiwan

    International Nuclear Information System (INIS)

    Lee, Yung-Jaan

    2015-01-01

    The consumer responsibility approach uses footprints as indicators of the total direct and indirect effects of a product or consumption activity. This study used a time-series analysis of three environmental pressures to quantify the total environmental pressures caused by consumption in Taiwan: land footprint, carbon footprint, and water footprint. Land footprint is the pressure from appropriation of biologically productive land and water area. Carbon footprint is the pressure from greenhouse gas emissions. Water footprint is the pressure from freshwater consumption. Conventional carbon footprint is the total CO 2 emitted by a certain activity or the CO 2 accumulation during a product life cycle. This definition cannot be used to convert CO 2 emissions into land units. This study responds to the needs of “CO 2 land” in the footprint family by applying the carbon footprint concept used by GFN. The analytical results showed that consumption by the average Taiwan citizen in 2000 required appropriation of 5.39 gha (hectares of land with global-average biological productivity) and 3.63 gha in 2011 in terms of land footprint. The average Taiwan citizen had a carbon footprint of 3.95 gha in 2000 and 5.94 gha in 2011. These results indicate that separately analyzing the land and carbon footprints enables their trends to be compared and appropriate policies and strategies for different sectors to be proposed accordingly. The average Taiwan citizen had a blue water footprint of 801 m 3 in 2000 and 784 m 3 in 2011. By comparison, their respective global averages were 1.23 gha, 2.36 gha and 163 m 3 blue water in 2011, respectively. Overall, Taiwan revealed higher environmental pressures compared to the rest of the world, demonstrating that Taiwan has become a high footprint state and has appropriated environmental resources from other countries. That is, through its imports of products with embodied pressures and its exports, Taiwan has transferred the environmental

  6. Water Footprint Symposium: where next for water footprint and water assessment methodology?

    NARCIS (Netherlands)

    Tillotson, M.R.; Kiu, J.; Guan, D.; Wu, P.; Zhao, Xu; Zhang, Guoping; Pfister, S.; Pahlow, Markus

    2014-01-01

    Recognizing the need for a comprehensive review of the tools and metrics for the quantification and assessment of water footprints, and allowing for the opportunity for open discussion on the challenges and future of water footprinting methodology, an international symposium on water footprint was

  7. Assessing Water and Carbon Footprints for Sustainable Water Resource Management

    Science.gov (United States)

    The key points of this presentation are: (1) Water footprint and carbon footprint as two sustainability attributes in adaptations to climate and socioeconomic changes, (2) Necessary to evaluate carbon and water footprints relative to constraints in resource capacity, (3) Critical...

  8. Product carbon footprint developments and gaps

    DEFF Research Database (Denmark)

    Kronborg Jensen, Jesper

    2012-01-01

    Purpose - Over the last decade, multiple initiatives have been undertaken to learn how to capture the carbon footprint of a supply chain at a product level. The purpose of this paper is to focus on the process of standardization to secure consistency of product carbon footprinting (PCF...

  9. Sustainable Colombia : A Comprehensive Colombian Footprint Review

    OpenAIRE

    Brad Ewing

    2010-01-01

    During the past several months, the Ministry of Environment, Housing and Territorial Development of Colombia has been researching potential indicators that would be useful to assess and possibly adopt among which included the ecological footprint. This work was commissioned in order to provide the Ministry with a deeper understanding of the ecological footprint and to train a number of its...

  10. Assessing carbon footprints of dairy production systems

    Science.gov (United States)

    The farm-gate carbon footprint of milk quantifies the net greenhouse gas emissions of a dairy production system. Published values vary widely depending upon farm management practices and the calculation method used. Standard procedures for calculating the carbon footprint of milk are now established...

  11. Double counting in supply chain carbon footprinting

    NARCIS (Netherlands)

    F. Caro (Felipe); C.J. Corbett (Charles); T. Tan (Terence); R.A. Zuidwijk (Rob)

    2013-01-01

    textabstractCarbon footprinting is a tool for firms to determine the total greenhouse gas (GHG) emissions associated with their supply chain or with a unit of final product or service. Carbon footprinting typically aims to identify where best to invest in emission reduction efforts, and/or to

  12. The water footprint of modern consumer society

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert

    2013-01-01

    Water is not only used in the domestic context, but also in agriculture and industry in the production of commercial goods, from food to paper. The water footprint is an indicator of freshwater use that looks at both direct and indirect use of water by a consumer or producer. The water footprint of

  13. promoting sustainability by curtailing ecological footprints of

    African Journals Online (AJOL)

    The need to regulate land use and the exploitation of natural resources has led to the concept of sustainability, and by extension, ecological footprint (the total amount of land required by an individual to grow his/her needs). This paper examines ecological footprint savings in urban growth and housing development in ...

  14. GDP AND ENVIRONMENT RELATION: FOOTPRINT APPROACH

    Directory of Open Access Journals (Sweden)

    Alice Aloísia da Cruz

    2013-04-01

    Full Text Available The Ecological Footprint represents the amount needed land and water to produce the resources and assimilate the waste generated by the population. In contrast the consumption of resources with the carrying capacity of nature and showing, in the long term, these impacts will be sustainable. This article by means of a discriminant analysis in selected countries, investigates the relationship between the variables chosen, the Ecological Footprint and per capita real GDP. And although there are countries with GDP per capita Ecological Footprint up and below average in general countries with per capita GDP increased tend to have a higher environmental impact, or ecological footprint than the average. Therefore, for the year 2005, this study supports a direct relationship between per capita real GDP and Ecological Footprint.

  15. Water Footprint of crop productions: A review.

    Science.gov (United States)

    Lovarelli, Daniela; Bacenetti, Jacopo; Fiala, Marco

    2016-04-01

    Water Footprint is an indicator recently developed with the goal of quantifying the virtual content of water in products and/or services. It can also be used to identify the worldwide virtual water trade. Water Footprint is composed of three parts (green, blue and grey waters) that make the assessment complete in accordance with the Water Footprint Network and with the recent ISO14046. The importance of Water Footprint is linked to the need of taking consciousness about water content in products and services and of the achievable changes in productions, diets and market trades. In this study, a literature review has been completed on Water Footprint of agricultural productions. In particular, the focus was paid on crops for the production of food and bioenergy. From the review, the development of the Water Footprint concept emerged: in early studies the main goal was to assess products' water trade on a global scale, while in the subsequent years, the goal was the rigorous quantification of the three components for specific crops and in specific geographical areas. In the most recent assessments, similarities about the methodology and the employed tools emerged. For 96 scientific articles on Water Footprint indicator of agricultural productions, this literature review reports the main results and analyses weaknesses and strengths. Seventy-eight percent of studies aimed to quantify Water Footprint, while the remaining 22% analysed methodology, uncertainty, future trends and comparisons with other footprints. It emerged that most studies that quantified Water Footprint concerned cereals (33%), among which maize and wheat were the most investigated crops. In 46% of studies all the three components were assessed, while in 18% no indication about the subdivision was given; in the remaining 37%, only blue or green and blue components were quantified. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Toward a nitrogen footprint calculator for Tanzania

    Science.gov (United States)

    Hutton, Mary Olivia; Leach, Allison M.; Leip, Adrian; Galloway, James N.; Bekunda, Mateete; Sullivan, Clare; Lesschen, Jan Peter

    2017-03-01

    We present the first nitrogen footprint model for a developing country: Tanzania. Nitrogen (N) is a crucial element for agriculture and human nutrition, but in excess it can cause serious environmental damage. The Sub-Saharan African nation of Tanzania faces a two-sided nitrogen problem: while there is not enough soil nitrogen to produce adequate food, excess nitrogen that escapes into the environment causes a cascade of ecological and human health problems. To identify, quantify, and contribute to solving these problems, this paper presents a nitrogen footprint tool for Tanzania. This nitrogen footprint tool is a concept originally designed for the United States of America (USA) and other developed countries. It uses personal resource consumption data to calculate a per-capita nitrogen footprint. The Tanzania N footprint tool is a version adapted to reflect the low-input, integrated agricultural system of Tanzania. This is reflected by calculating two sets of virtual N factors to describe N losses during food production: one for fertilized farms and one for unfertilized farms. Soil mining factors are also calculated for the first time to address the amount of N removed from the soil to produce food. The average per-capita nitrogen footprint of Tanzania is 10 kg N yr-1. 88% of this footprint is due to food consumption and production, while only 12% of the footprint is due to energy use. Although 91% of farms in Tanzania are unfertilized, the large contribution of fertilized farms to N losses causes unfertilized farms to make up just 83% of the food production N footprint. In a developing country like Tanzania, the main audiences for the N footprint tool are community leaders, planners, and developers who can impact decision-making and use the calculator to plan positive changes for nitrogen sustainability in the developing world.

  17. The water footprint of humanity

    Science.gov (United States)

    Mekonnen, M. M.; Hoekstra, A. Y.

    2011-12-01

    This study quantifies and maps the water footprint (WF) of humanity at a high spatial resolution level. It reports on consumptive use of rainwater (green WF) and ground and surface water (blue WF) and volumes of water polluted (grey WF). Water footprints are estimated per nation from both a production and consumption perspective. International virtual water flows are estimated based on trade in agricultural and industrial commodities. The global WF in the period 1996-2005 was 9087 Gm3/yr (74% green, 11% blue, 15% grey). Agricultural production contributes 92%. About one fifth of the global WF relates to production for export. The total volume of international virtual water flows related to trade in agricultural and industrial products was 2320 Gm3/yr (68% green, 13% blue, 19% grey). The WF of the global average consumer was 1385 m3/yr. The average consumer in the US has a WF of 2842 m3/yr, while the average citizens in China and India have WFs of 1071 m3/yr and 1089 m3/yr, respectively. Consumption of cereal products gives the largest contribution to the WF of the average consumer (27%), followed by meat (22%) and milk products (7%). The volume and pattern of consumption and the WF per ton of product of the products consumed are the main factors determining the WF of a consumer. The study illustrates the global dimension of water consumption and pollution by showing that several countries heavily rely on foreign water resources and that many countries have significant impacts on water consumption and pollution elsewhere.

  18. ASSESSMENT OF HOUSEHOLD CARBON FOOTPRINT REDUCTION POTENTIALS

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, Klaas Jan; Homan, Greg; Brown, Rich; Worrell, Ernst; Masanet, Eric

    2009-04-15

    The term ?household carbon footprint? refers to the total annual carbon emissions associated with household consumption of energy, goods, and services. In this project, Lawrence Berkeley National Laboratory developed a carbon footprint modeling framework that characterizes the key underlying technologies and processes that contribute to household carbon footprints in California and the United States. The approach breaks down the carbon footprint by 35 different household fuel end uses and 32 different supply chain fuel end uses. This level of end use detail allows energy and policy analysts to better understand the underlying technologies and processes contributing to the carbon footprint of California households. The modeling framework was applied to estimate the annual home energy and supply chain carbon footprints of a prototypical California household. A preliminary assessment of parameter uncertainty associated with key model input data was also conducted. To illustrate the policy-relevance of this modeling framework, a case study was conducted that analyzed the achievable carbon footprint reductions associated with the adoption of energy efficient household and supply chain technologies.

  19. The Water Footprint of Food Aid

    Directory of Open Access Journals (Sweden)

    Nicole Jackson

    2015-05-01

    Full Text Available Food aid is a critical component of the global food system, particularly when emergency situations arise. For the first time, we evaluate the water footprint of food aid. To do this, we draw on food aid data from theWorld Food Programme and virtual water content estimates from WaterStat. We find that the total water footprint of food aid was 10 km3 in 2005, which represents approximately 0.5% of the water footprint of food trade and 2.0% of the water footprint of land grabbing (i.e., water appropriation associated with large agricultural land deals. The United States is by far the largest food aid donor and contributes 82% of the water footprint of food aid. The countries that receive the most water embodied in aid are Ethiopia, Sudan, North Korea, Bangladesh and Afghanistan. Notably, we find that there is significant overlap between countries that receive food aid and those that have their land grabbed. Multivariate regression results indicate that donor water footprints are driven by political and environmental variables, whereas recipient water footprints are driven by land grabbing and food indicators.

  20. Shadow Analysis Technique for Extraction of Building Height using High Resolution Satellite Single Image and Accuracy Assessment

    Science.gov (United States)

    Raju, P. L. N.; Chaudhary, H.; Jha, A. K.

    2014-11-01

    These High resolution satellite data with metadata information is used to extract the height of the building using shadow. Proposed approach divides into two phases 1) rooftop and shadow extraction and 2) height estimation. Firstly the rooftop and shadow region were extracted by manual/ automatic methods using Example - Based and Rule - Based approaches. After feature extraction next step is estimating height of the building by taking rooftop in association with shadow using Ratio Method and by using the relation between sun-satellite geometry. The performance analysis shows the total mean error of height is 0.67 m from ratio method, 1.51 m from Example - Based Approach and 0.96 m from Rule - Based Approach. Analysis concluded that Ratio Method i.e. manual method is best for height estimation but it is time consuming so the automatic Rule Based approach is best for height estimation in comparison to Example Based Approach because it require more knowledge and selection of more training samples as well as slows the processing rate of the method.

  1. Review article: Quantifying the human impact on water resources: a critical review of the water footprint concept

    Science.gov (United States)

    Chenoweth, J.; Hadjikakou, M.; Zoumides, C.

    2013-07-01

    The water footprint is a consumption-based indicator of water use, referring to the total volume of freshwater used directly and indirectly by a nation or a company, or in the provision of a product or service. Despite widespread enthusiasm for the development and use of water footprints, some concerns have been raised about the concept and its usefulness. A variety of methodologies have been developed for water footprinting which differ with respect to how they deal with different forms of water use. The result is water footprint estimates which vary dramatically, often creating confusion. Despite these methodological qualms, the concept has had notable success in raising awareness about water use in agricultural and industrial supply chains, by providing a previously unavailable and (seemingly) simple numerical indicator of water use. Nevertheless, and even though a range of uses have already been suggested for water footprinting, its policy value remains unclear. Unlike the carbon footprint which provides a universal measure of human impact on the atmosphere's limited absorptive capacity, the water footprint in its conventional form solely quantifies a single production input without any accounting of the impacts of use, which vary spatially and temporally. Following an extensive review of the literature related to water footprints, this paper critically examines the present uses of the concept, focusing on its current strengths, shortcomings and promising research avenues to advance it.

  2. Corporate Ecological Footprint: New Conversion Factors

    Directory of Open Access Journals (Sweden)

    Pablo Coto-Millán

    2008-01-01

    Full Text Available The first ecological footprint calculation version, applied to companies, appeared in 2003. The said tool provides the possibility of calculating the total impact of a company or organisation in hectares or in equivalent emissions of CO2. This paper updates carbon absorption rates and improves electricity consumption conversion factors, one of the major footprint generating consumptions in companies. The new rates prove that the footprint estimated to date will be notably increased as, among other aspects, the IPCC has downgraded the amount of carbon that forests are capable of absorbing. These data reveal that companies must make a great effort to adapt to the challenges triggered by climate change.

  3. Sensitivity of Satellite-Based Skin Temperature to Different Surface Emissivity and NWP Reanalysis Sources Demonstrated Using a Single-Channel, Viewing-Angle-Corrected Retrieval Algorithm

    Science.gov (United States)

    Scarino, B. R.; Minnis, P.; Yost, C. R.; Chee, T.; Palikonda, R.

    2015-12-01

    Single-channel algorithms for satellite thermal-infrared- (TIR-) derived land and sea surface skin temperature (LST and SST) are advantageous in that they can be easily applied to a variety of satellite sensors. They can also accommodate decade-spanning instrument series, particularly for periods when split-window capabilities are not available. However, the benefit of one unified retrieval methodology for all sensors comes at the cost of critical sensitivity to surface emissivity (ɛs) and atmospheric transmittance estimation. It has been demonstrated that as little as 0.01 variance in ɛs can amount to more than a 0.5-K adjustment in retrieved LST values. Atmospheric transmittance requires calculations that employ vertical profiles of temperature and humidity from numerical weather prediction (NWP) models. Selection of a given NWP model can significantly affect LST and SST agreement relative to their respective validation sources. Thus, it is necessary to understand the accuracies of the retrievals for various NWP models to ensure the best LST/SST retrievals. The sensitivities of the single-channel retrievals to surface emittance and NWP profiles are investigated using NASA Langley historic land and ocean clear-sky skin temperature (Ts) values derived from high-resolution 11-μm TIR brightness temperature measured from geostationary satellites (GEOSat) and Advanced Very High Resolution Radiometers (AVHRR). It is shown that mean GEOSat-derived, anisotropy-corrected LST can vary by up to ±0.8 K depending on whether CERES or MODIS ɛs sources are used. Furthermore, the use of either NOAA Global Forecast System (GFS) or NASA Goddard Modern-Era Retrospective Analysis for Research and Applications (MERRA) for the radiative transfer model initial atmospheric state can account for more than 0.5-K variation in mean Ts. The results are compared to measurements from the Surface Radiation Budget Network (SURFRAD), an Atmospheric Radiation Measurement (ARM) Program ground

  4. Assessing Water and Carbon Footprints for Green Water Resource Management

    Science.gov (United States)

    This slide presentation will focus on the following points: (1) Water footprint and carbon footprint are two criteria evaluating the greenness in urban development, (2) Two cases are examined and presented: water footprints in energy productions and carbon footprints in water ...

  5. Genomic footprinting in mammalian cells with ultraviolet light

    International Nuclear Information System (INIS)

    Becker, M.M.; Wang, Z.; Grossmann, G.; Becherer, K.A.

    1989-01-01

    A simple and accurate genomic primer extension method has been developed to detect ultraviolet footprinting patterns of regulatory protein-DNA interactions in mammalian genomic DNA. The technique can also detect footprinting or sequencing patterns introduced into genomic DNA by other methods. Purified genomic DNA, containing either damaged bases or strand breaks introduced by footprinting or sequencing reactions, is first cut with a convenient restriction enzyme to reduce its molecular weight. A highly radioactive single-stranded DNA primer that is complementary to a region of genomic DNA whose sequence or footprint one wishes to examine is then mixed with 50 micrograms of restriction enzyme-cut genomic DNA. The primer is approximately 100 bases long and contains 85 radioactive phosphates, each of specific activity 3000 Ci/mmol (1 Ci = 37 GBq). A simple and fast method for preparing such primers is described. Following brief heat denaturation at 100 degrees C, the solution of genomic DNA and primer is cooled to 74 degrees C and a second solution containing Taq polymerase (Thermus aquaticus DNA polymerase) and the four deoxynucleotide triphosphates is added to initiate primer extension of genomic DNA. Taq polymerase extends genomic hybridized primer until its polymerization reaction is terminated either by a damaged base or strand break in genomic DNA or by the addition of dideoxynucleotide triphosphates in the polymerization reaction. The concurrent primer hybridization-extension reaction is terminated after 5 hr and unhybridized primer is digested away by mung bean nuclease. Primer-extended genomic DNA is then denatured and electrophoresed on a polyacrylamide sequencing gel, and radioactive primer extension products are revealed by autoradiography

  6. Water footprint and carbon footprint of the energy consumption in sunflower agroecosystems.

    Science.gov (United States)

    Yousefi, Mohammad; Khoramivafa, Mahmud; Damghani, Abdolmajid Mahdavi

    2017-08-01

    The aims of this study were to assess the energy requirements, carbon footprint, and water footprint of sunflower production in Kermanshah province, western Iran. Data were collected from 70 sunflower production agroecosystems which were selected based on random sampling method in summer 2012. Results indicated that total input and output energy in sunflower production were 26,973.87 and 64,833.92 MJha -1 , respectively. The highest share of total input energy in sunflower agroecosystems was recorded for electricity power, N fertilizer, and diesel fuel with 35, 19, and 17%, respectively. Also, energy use efficiency, water footprint, greenhouse gas (GHG) emission, and carbon footprint were calculated as 2.40, 3.41 m 3  kg -1 , 2042.091 kg CO 2eq ha -1 , and 0.875 kg CO 2eq kg -1 , respectively. 0.18 of sunflower water footprint was related to green water footprint and the remaining 82% was related to blue water footprint. Also, the highest share of carbon footprint was related to electricity power (nearby 80%). Due to the results of this study, reducing use of fossil fuel and non-renewable energy resource and application of sufficient irrigation systems by efficient use of water resource are essential in order to achieve low carbon footprint, environmental challenges, and also sustainability of agricultural production systems.

  7. ECOLOGICAL FOOTPRINT FROM THE SUSTAINABILITY PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Gabriela Cornelia PICIU

    2013-10-01

    Full Text Available The paper studied the importance of Ecological Footprint (EF for estimating the biologically productive area. Since the Ecological Footprint is a measure of renewable biocapacity, we argue that some dimensions of ecological sustainability should not be included in the Ecological Footprint. These include human activities that should be phased out to obtain sustainability, such as emissions of persistent compounds foreign to nature and qualitative aspects that represent secondary uses of ecological areas and do not, therefore, occupy a clearly identifiable additional ecological space. We also conclude that the Ecological Footprint is useful for documenting the overall human use or abuse of the potentially renewable functions and services of nature. Particularly, by aggregating in a consistent way a variety of human impacts, it can effectively identify the scale of the human economy by comparison with the size of the biosphere.

  8. Carbon Footprint Calculator | Climate Change | US EPA

    Science.gov (United States)

    2016-12-12

    An interactive calculator to estimate your household's carbon footprint. This tool will estimate carbon pollution emissions from your daily activities and show how to reduce your emissions and save money through simple steps.

  9. Carbon footprint for HMA and PCC pavements.

    Science.gov (United States)

    2011-07-25

    Motivated by the need to address challenges of global climate change, this study develops and implements a project : based life cycle framework that can be used to estimate the carbon footprint for typical construction work-items : found in reconstru...

  10. Water footprint of hydro power in Norway

    Science.gov (United States)

    Engeland, Kolbjørn; Tallaksen, Lena; Haakon Bakken, Tor; Killingtveit, Ånund

    2015-04-01

    The IPCC Special Report on Renewable Energy (IPCC, 2012) assesses the potential for renewable energy sources to replace fossil-based fuels and benchmarks the technologies with respect to a set of criteria, including their water footprint measured as m3/MWh. While most of the renewable technologies show a typical range of 1-5 m3/MWh, the very sparse data on hydropower range from a minimum of 0.04 to a maximum of 209 m3/MWh. More recent studies on water footprint from hydropower indicate that the water consumption rates could go even far beyond the numbers published by IPCC (2012). The methodological approach behind these numbers are, however, criticized as it appears over-simplistic and several issues need to be defined and clarified in order to present the 'true picture' of the water footprint of hydropower. Despite this, the rather high numbers for hydropower may imply a reputational risk for the sector and also be a direct investment risk in new projects if hydropower is considered a "large-scale water consumer". Estimation of water footprint has two important components (i) definition of water footprint (including system boundaries), and (ii) estimation of evaporation, which is assumed to constitute the main water loss from hydropower. Here we will mainly address the second topic and have chosen to use a water footprint definition based on net evapotranspiration from reservoirs. Thus, we need estimates of evapotranspiration from the land surface prior to inundation and the evaporation from the reservoir after it has been filled up. The primary objective of the study is to estimate water footprint of hydropower in Norway and in particular to answer the following questions: (i) How does different environmental variables influence water footprint estimation in Norway?, and in particular (ii) What is the total/specific water footprint from Norwegian hydropower production? To answer these questions we tested how environmental variables like climate and vegetation

  11. Atlantic Multidecadal Oscillation footprint on global high cloud cover

    Science.gov (United States)

    Vaideanu, Petru; Dima, Mihai; Voiculescu, Mirela

    2017-12-01

    Due to the complexity of the physical processes responsible for cloud formation and to the relatively short satellite database of continuous data records, cloud behavior in a warming climate remains uncertain. Identifying physical links between climate modes and clouds would contribute not only to a better understanding of the physical processes governing their formation and dynamics, but also to an improved representation of the clouds in climate models. Here, we identify the global footprint of the Atlantic Multidecadal Oscillation (AMO) on high cloud cover, with focus on the tropical and North Atlantic, tropical Pacific and on the circum-Antarctic sector. In the tropical band, the sea surface temperature (SST) and high cloud cover (HCC) anomalies are positively correlated, indicating a dominant role played by convection in mediating the influence of the AMO-related SST anomalies on the HCC field. The negative SST-HCC correlation observed in North Atlantic could be explained by the reduced meridional temperature gradient induced by the AMO positive phase, which would be reflected in less storms and negative HCC anomalies. A similar negative SST-HCC correlation is observed around Antarctica. The corresponding negative correlation around Antarctica could be generated dynamically, as a response to the intensified upward motion in the Ferrel cell. Despite the inherent imperfection of the observed and reanalysis data sets, the AMO footprint on HCC is found to be robust to the choice of dataset, statistical method, and specific time period considered.

  12. Augmenting a guitar with its digital footprint

    OpenAIRE

    Benford, Steve; Hazzard, Adrian; Chamberlain, Alan; Xu, Liming

    2015-01-01

    We explore how to digitally augment musical instruments by connecting them to their social histories. We describe the use of Internet of Things technologies to connect an acoustic guitar to its digital footprint – a record of how it was designed, built and played. We introduce the approach of crafting interactive decorative inlay into the body of an instrument that can then be scanned using mobile devices to reveal its digital footprint. We describe the design and construction of an augmented...

  13. Spatially and temporally explicit water footprint accounting

    OpenAIRE

    Mekonnen, Mesfin

    2011-01-01

    The earth’s freshwater resources are subject to increasing pressure in the form of consumptive water use and pollution (Postel, 2000; WWAP, 2003, 2006, 2009). Quantitative assessment of the green, blue and grey water footprint of global production and consumption can be regarded as a key in understanding the pressure put on the global freshwater resources. The overall objective of this thesis is, therefore, to analyse the spatial and temporal pattern of the water footprint of humans from both...

  14. The water footprint of Milan.

    Science.gov (United States)

    Vanham, D; Bidoglio, G

    2014-01-01

    This study quantifies the water footprint of consumption (WFcons) and production (WFprod) of Milan. The current WFcons amounts to 6,139 l/cap/d (a volume of 2.93 km(3) annually), of which 52 l/cap/d (1%) is attributed to domestic water, 448 l/cap/d (7%) to the consumption of industrial products and 5,639 l/cap/d (92%) to the consumption of agricultural products. The WFprod is 52 l/cap/d. Milan is thus a net virtual water importer, predominantly through the import of agricultural products. These are produced outside city borders, both in Italy and abroad. This shows the dependency of city dwellers on water resources from other river basins. In addition, the WFcons for a healthy diet (based on Mediterranean Food-Based Dietary Guidelines) and a vegetarian diet are analysed. The current Milanese diet consists of too much sugar, crop oils, meat, animal fats, milk and milk products and not enough cereals, rice, potatoes, vegetables and fruit. The latter two diets result in substantial WFcons reductions: -29% (to 4,339 l/cap/d) for a healthy diet and -41% (to 3,631 l/cap/d) for a vegetarian diet. Indeed, a lot of water could be saved by Milan citizens through a change in their diet. A sustainable city should account for its impacts beyond its borders.

  15. Carbon footprint of electronic devices

    Science.gov (United States)

    Sloma, Marcin

    2013-07-01

    Paper assesses the greenhouse gas emissions related to the electronic sectors including information and communication technology and media sectors. While media often presents the carbon emission problem of other industries like petroleum industry, the airlines and automobile sectors, plastics and steel manufacturers, the electronics industry must include the increasing carbon footprints caused from their applications like media and entertainment, computers and cooling devices, complex telecommunications networks, cloud computing and powerful mobile phones. In that sense greenhouse gas emission of electronics should be studied in a life cycle perspective, including regular operational electricity use. Paper presents which product groups or processes are major contributors in emission. From available data and extrapolation of existing information we know that the information and communication technology sector produced 1.3% and media sector 1.7% of global gas emissions within production cycle, using the data from 2007.In the same time global electricity use of that sectors was 3.9% and 3.2% respectively. The results indicate that for both sectors operation leads to more gas emissions than manufacture, although impacts from the manufacture is significant, especially in the supply chain. Media electronics led to more emissions than PCs (manufacture and operation). Examining the role of electronics in climate change, including disposal of its waste, will enable the industry to take internal actions, leading to lowering the impact on the climate change within the sector itself.

  16. Atmospheric mercury footprints of nations.

    Science.gov (United States)

    Liang, Sai; Wang, Yafei; Cinnirella, Sergio; Pirrone, Nicola

    2015-03-17

    The Minamata Convention was established to protect humans and the natural environment from the adverse effects of mercury emissions. A cogent assessment of mercury emissions is required to help implement the Minamata Convention. Here, we use an environmentally extended multi-regional input-output model to calculate atmospheric mercury footprints of nations based on upstream production (meaning direct emissions from the production activities of a nation), downstream production (meaning both direct and indirect emissions caused by the production activities of a nation), and consumption (meaning both direct and indirect emissions caused by final consumption of goods and services in a nation). Results show that nations function differently within global supply chains. Developed nations usually have larger consumption-based emissions than up- and downstream production-based emissions. India, South Korea, and Taiwan have larger downstream production-based emissions than their upstream production- and consumption-based emissions. Developed nations (e.g., United States, Japan, and Germany) are in part responsible for mercury emissions of developing nations (e.g., China, India, and Indonesia). Our findings indicate that global mercury abatement should focus on multiple stages of global supply chains. We propose three initiatives for global mercury abatement, comprising the establishment of mercury control technologies of upstream producers, productivity improvement of downstream producers, and behavior optimization of final consumers.

  17. , , , , , and Gene Expression in Single- and Co-cultured Bovine Satellite Cells and Intramuscular Preadipocytes Treated with Palmitic, Stearic, Oleic, and Linoleic Acid

    Directory of Open Access Journals (Sweden)

    S. H. Choi

    2015-03-01

    Full Text Available We previously demonstrated that bovine subcutaneous preadipocytes promote adipogenic gene expression in muscle satellite cells in a co-culture system. Herein we hypothesize that saturated fatty acids would promote adipogenic/lipogenic gene expression, whereas mono- and polyunsaturated fatty acids would have the opposite effect. Bovine semimembranosus satellite cells (BSC and intramuscular preadipocytes (IPA were isolated from crossbred steers and cultured with 10% fetal bovine serum (FBS/Dulbecco’s Modified Eagle Medium (DMEM and 1% antibiotics during the 3-d proliferation period. After proliferation, cells were treated for 3 d with 3% horse serum/DMEM (BSC or 5% FBS/DMEM (IPA with antibiotics. Media also contained 10 μg/mL insulin and 10 μg/mL pioglitazone. Subsequently, differentiating BSC and IPA were cultured in their respective media with 40 μM palmitic, stearic, oleic, or linoleic acid for 4 d. Finally, BSC and IPA were single- or co-cultured for an additional 2 h. All fatty acid treatments increased (p = 0.001 carnitine palmitoyltransferase-1 beta (CPT1β gene expression, but the increase in CPT1β gene expression was especially pronounced in IPA incubated with palmitic and stearic acid (6- to 17- fold increases. Oleic and linoleic acid decreased (p = 0.001 stearoyl-CoA desaturase (SCD gene expression over 80% in both BSC and IPA. Conversely, palmitic and stearic acid increased SCD gene expression three fold in co-cultured in IPA, and stearic acid increased AMPKα gene expression in single- and co-cultured BSC and IPA. Consistent with our hypothesis, saturated fatty acids, especially stearic acid, promoted adipogenic and lipogenic gene expression, whereas unsaturated fatty acids decreased expression of those genes associated with fatty acid metabolism.

  18. National water footprint accounts: the green, blue and grey water footprint of production and consumption

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2011-01-01

    This study quantifies and maps the water footprints of nations from both a production and consumption perspective and estimates international virtual water flows and national and global water savings as a result of trade. The entire estimate includes a breakdown of water footprints, virtual water

  19. On carbon footprints and growing energy use

    Energy Technology Data Exchange (ETDEWEB)

    Oldenburg, C.M.

    2011-06-01

    Could fractional reductions in the carbon footprint of a growing organization lead to a corresponding real reduction in atmospheric CO{sub 2} emissions in the next ten years? Curtis M. Oldenburg, head of the Geologic Carbon Sequestration Program of LBNL’s Earth Sciences Division, considers his own organization's carbon footprint and answers this critical question? In addressing the problem of energy-related greenhouse gas (GHG) emissions and climate change, it is essential that we understand which activities are producing GHGs and the scale of emission for each activity, so that reduction efforts can be efficiently targeted. The GHG emissions to the atmosphere of an individual or group are referred to as the ‘carbon footprint’. This terminology is entirely appropriate, because 85% of the global marketed energy supply comes from carbon-rich fossil fuel sources whose combustion produces CO{sub 2}, the main GHG causing global climate change. Furthermore, the direct relation between CO2 emissions and fossil fuels as they are used today makes energy consumption a useful proxy for carbon footprint. It would seem to be a simple matter to reduce energy consumption across the board, both individually and collectively, to help reduce our carbon footprints and therefore solve the energyclimate crisis. But just how much can we reduce carbon footprints when broader forces, such as growth in energy use, cause the total footprint to simultaneously expand? In this feature, I present a calculation of the carbon footprint of the Earth Sciences Division (ESD), the division in which I work at Lawrence Berkeley National Laboratory (LBNL), and discuss the potential for reducing this carbon footprint. It will be apparent that in terms of potential future carbon footprint reductions under projections of expected growth, ESD may be thought of as a microcosm of the situation of the world as a whole, in which alternatives to the business-as-usual use of fossil fuels are needed if

  20. Mapping the Carbon Footprint of Nations.

    Science.gov (United States)

    Kanemoto, Keiichiro; Moran, Daniel; Hertwich, Edgar G

    2016-10-04

    Life cycle thinking asks companies and consumers to take responsibility for emissions along their entire supply chain. As the world economy becomes more complex it is increasingly difficult to connect consumers and other downstream users to the origins of their greenhouse gas (GHG) emissions. Given the important role of subnational entities-cities, states, and companies-in GHG abatement efforts, it would be advantageous to better link downstream users to facilities and regulators who control primary emissions. We present a new spatially explicit carbon footprint method for establishing such connections. We find that for most developed countries the carbon footprint has diluted and spread: for example, since 1970 the U.S. carbon footprint has grown 23% territorially, and 38% in consumption-based terms, but nearly 200% in spatial extent (i.e., the minimum area needed to contain 90% of emissions). The rapidly growing carbon footprints of China and India, however, do not show such a spatial expansion of their consumption footprints in spite of their increasing participation in the world economy. In their case, urbanization concentrates domestic pollution and this offsets the increasing importance of imports.

  1. Carbon footprint of grain production in China.

    Science.gov (United States)

    Zhang, Dan; Shen, Jianbo; Zhang, Fusuo; Li, Yu'e; Zhang, Weifeng

    2017-06-29

    Due to the increasing environmental impact of food production, carbon footprint as an indicator can guide farmland management. This study established a method and estimated the carbon footprint of grain production in China based on life cycle analysis (LCA). The results showed that grain production has a high carbon footprint in 2013, i.e., 4052 kg ce/ha or 0.48 kg ce/kg for maize, 5455 kg ce/ha or 0.75 kg ce/kg for wheat and 11881 kg ce/ha or 1.60 kg ce/kg for rice. These footprints are higher than that of other countries, such as the United States, Canada and India. The most important factors governing carbon emissions were the application of nitrogen fertiliser (8-49%), straw burning (0-70%), energy consumption by machinery (6-40%), energy consumption for irrigation (0-44%) and CH 4 emissions from rice paddies (15-73%). The most important carbon sequestration factors included returning of crop straw (41-90%), chemical nitrogen fertiliser application (10-59%) and no-till farming practices (0-10%). Different factors dominated in different crop systems in different regions. To identity site-specific key factors and take countermeasures could significantly lower carbon footprint, e.g., ban straw burning in northeast and south China, stopping continuous flooding irrigation in wheat and rice production system.

  2. Nitrogen footprints: past, present and future

    Science.gov (United States)

    Galloway, James N.; Winiwarter, Wilfried; Leip, Adrian; Leach, Allison M.; Bleeker, Albert; Willem Erisman, Jan

    2014-11-01

    The human alteration of the nitrogen cycle has evolved from minimal in the mid-19th century to extensive in the present time. The consequences to human and environmental health are significant. While much attention has been given to the extent and impacts of the alteration, little attention has been given to those entities (i.e., consumers, institutions) that use the resources that result in extensive reactive nitrogen (Nr) creation. One strategy for assessment is the use of nitrogen footprint tools. A nitrogen footprint is generally defined as the total amount of Nr released to the environment as a result of an entity’s consumption patterns. This paper reviews a number of nitrogen footprint tools (N-Calculator, N-Institution, N-Label, N-Neutrality, N-Indicator) that are designed to provide that attention. It reviews N-footprint tools for consumers as a function of the country that they live in (N-Calculator, N-Indicator) and the products they buy (N-Label), for the institutions that people work in and are educated in (N-Institution), and for events and decision-making regarding offsets (N-Neutrality). N footprint tools provide a framework for people to make decisions about their resource use and show them how offsets can be coupled with behavior change to decrease consumer/institution contributions to N-related problems.

  3. Nitrogen footprints: past, present and future

    International Nuclear Information System (INIS)

    Galloway, James N; Leach, Allison M; Winiwarter, Wilfried; Leip, Adrian; Bleeker, Albert; Erisman, Jan Willem

    2014-01-01

    The human alteration of the nitrogen cycle has evolved from minimal in the mid-19th century to extensive in the present time. The consequences to human and environmental health are significant. While much attention has been given to the extent and impacts of the alteration, little attention has been given to those entities (i.e., consumers, institutions) that use the resources that result in extensive reactive nitrogen (Nr) creation. One strategy for assessment is the use of nitrogen footprint tools. A nitrogen footprint is generally defined as the total amount of Nr released to the environment as a result of an entity’s consumption patterns. This paper reviews a number of nitrogen footprint tools (N-Calculator, N-Institution, N-Label, N-Neutrality, N-Indicator) that are designed to provide that attention. It reviews N-footprint tools for consumers as a function of the country that they live in (N-Calculator, N-Indicator) and the products they buy (N-Label), for the institutions that people work in and are educated in (N-Institution), and for events and decision-making regarding offsets (N-Neutrality). N footprint tools provide a framework for people to make decisions about their resource use and show them how offsets can be coupled with behavior change to decrease consumer/institution contributions to N-related problems. (paper)

  4. Silk industry and carbon footprint mitigation

    Science.gov (United States)

    Giacomin, A. M.; Garcia, J. B., Jr.; Zonatti, W. F.; Silva-Santos, M. C.; Laktim, M. C.; Baruque-Ramos, J.

    2017-10-01

    Currently there is a concern with issues related to sustainability and more conscious consumption habits. The carbon footprint measures the total amount of greenhouse gas (GHG) emissions produced directly and indirectly by human activities and is usually expressed in tonnes of carbon dioxide (CO2) equivalents. The present study takes into account data collected in scientific literature regarding the carbon footprint, garments produced with silk fiber and the role of mulberry as a CO2 mitigation tool. There is an indication of a positive correlation between silk garments and carbon footprint mitigation when computed the cultivation of mulberry trees in this calculation. A field of them mitigates CO2 equivalents in a proportion of 735 times the weight of the produced silk fiber by the mulberry cultivated area. At the same time, additional researches are needed in order to identify and evaluate methods to advertise this positive correlation in order to contribute to a more sustainable fashion industry.

  5. Single-source surface energy balance algorithms to estimate evapotranspiration from satellite-based remotely sensed data

    Science.gov (United States)

    Bhattarai, Nishan

    The flow of water and energy fluxes at the Earth's surface and within the climate system is difficult to quantify. Recent advances in remote sensing technologies have provided scientists with a useful means to improve characterization of these complex processes. However, many challenges remain that limit our ability to optimize remote sensing data in determining evapotranspiration (ET) and energy fluxes. For example, periodic cloud cover limits the operational use of remotely sensed data from passive sensors in monitoring seasonal fluxes. Additionally, there are many remote sensing-based single-source surface energy balance (SEB) models, but no clear guidance on which one to use in a particular application. Two widely used models---surface energy balance algorithm for land (SEBAL) and mapping ET at high resolution with internalized calibration (METRIC)---need substantial human-intervention that limits their applicability in broad-scale studies. This dissertation addressed some of these challenges by proposing novel ways to optimize available resources within the SEB-based ET modeling framework. A simple regression-based Landsat-Moderate Resolution Imaging Spectroradiometer (MODIS) fusion model was developed to integrate Landsat spatial and MODIS temporal characteristics in calculating ET. The fusion model produced reliable estimates of seasonal ET at moderate spatial resolution while mitigating the impact that cloud cover can have on image availability. The dissertation also evaluated five commonly used remote sensing-based single-source SEB models and found the surface energy balance system (SEBS) may be the best overall model for use in humid subtropical climates. The study also determined that model accuracy varies with land cover type, for example, all models worked well for wet marsh conditions, but the SEBAL and simplified surface energy balance index (S-SEBI) models worked better than the alternatives for grass cover. A new automated approach based on

  6. Carbon Footprint and Order Quantity in Logistics

    Directory of Open Access Journals (Sweden)

    Tian Zhiyong

    2014-05-01

    Full Text Available Purpose: Even without economic factors and government regulations, the pressure and motivation of corporation to reduce emission are still increasing. This is because the key factors for corporation to reduce emissions have become corporate social responsibility and identification of low-carbon value by consumer and society from economic trade-off and government regulations. So, the purpose of this paper is to provide quantity methods for the logistics organizations with wish of voluntary reduction and social responsibility.Design/methodology/approach: Being difference from the traditional research that takes economic value as object, this paper takes carbon footprint as object directly, order quantity as decision variable. By referring to the traditional economic order quantity model, the paper creates logistics carbon footprint model which takes transport and inventory into account. Then it solves the model by calculating the values of order quantity, carbon footprint and revenue using the method of optimization.Findings and Originality/value: By solving and comparing the two models of economic order quantity model and carbon footprint model, it gets some results, such as carbon optimization order quantity, the effects order quantity deviating from economic order quantity or carbon order quantity having on economic or carbon footprint values, which can give some meaningful insight for corporation to search out reduction opportunities by operations adjustment.Originality/value: The study takes carbon footprint as object directly and creates the corresponding quantity model. By comparing with the traditional economic order quantity model, the paper provides quantity methods and obtains some meaningful insights for the logistics organizations with wish of voluntary reduction and social responsibility to reduce emissions by operations adjustment.

  7. The carbon footprint of cataract surgery.

    Science.gov (United States)

    Morris, D S; Wright, T; Somner, J E A; Connor, A

    2013-04-01

    Climate change is predicted to be one of the largest global health threats of the 21st century. Health care itself is a large contributor to carbon emissions. Determining the carbon footprint of specific health care activities such as cataract surgery allows the assessment of associated emissions and identifies opportunities for reduction. To assess the carbon footprint of a cataract pathway in a British teaching hospital. This was a component analysis study for one patient having first eye cataract surgery in the University Hospital of Wales, Cardiff. Activity data was collected from three sectors, building and energy use, travel and procurement. Published emissions factors were applied to this data to provide figures in carbon dioxide equivalents (CO2eq). The carbon footprint for one cataract operation was 181.8 kg CO2eq. On the basis that 2230 patients were treated for cataracts during 2011 in Cardiff, this has an associated carbon footprint of 405.4 tonnes CO2eq. Building and energy use was estimated to account for 36.1% of overall emissions, travel 10.1% and procurement 53.8%, with medical equipment accounting for the most emissions at 32.6%. This is the first published carbon footprint of cataract surgery and acts as a benchmark for other studies as well as identifying areas for emissions reduction. Within the procurement sector, dialogue with industry is important to reduce the overall carbon footprint. Sustainability should be considered when cataract pathways are designed as there is potential for reduction in all sectors with the possible side effects of saving costs and improving patient care.

  8. Exceptional preservation of children's footprints from a Holocene footprint site in Namibia

    Science.gov (United States)

    Bennett, Matthew R.; Morse, Sarita A.; Liutkus-Pierce, Cynthia; McClymont, Juliet; Evans, Mary; Crompton, Robin H.; Francis Thackeray, J.

    2014-09-01

    Here we report on a Holocene inter-dune site close to Walvis Bay (Namibia) which contains exceptionally well-preserved children's footprints. The footprint surface is dated using Optically Stimulated Luminescence (OSL) methods to approximately 1.5 ka. These dates are compared to those obtained at nearby footprint sites and used to verify a model of diachronous footprint surfaces and also add to the archaeological data available for the communities that occupied these near-coastal areas during the Holocene. This model of diachronous footprint surfaces has implications for other soft-sediment footprint sites such as the 1.5 Ma old footprints at Ileret (Kenya). The distribution of both human and animal tracks, is consistent with the passage of small flock of small ungulates (probably sheep/goats) followed by a group of approximately 9 ± 2 individuals (children or young adults). Age estimates from the tracks suggest that some of the individuals may have been as young as five years old. Variation in track topology across this sedimentologically uniform surface is explained in terms of variations in gait and weight/stature of the individual print makers and is used to corroborate a model of footprint morphology developed at a nearby site. The significance of the site within the literature on human footprints lies in the quality of the track preservation, their topological variability despite a potentially uniform substrate, and the small size of the tracks, and therefore the inferred young age of the track-makers. The site provides an emotive insight into the life of the track-makers.

  9. The conundrum of calculating carbon footprints

    DEFF Research Database (Denmark)

    Strobel, Bjarne W.; Erichsen, Anders Christian; Gausset, Quentin

    2016-01-01

    A pre-condition for reducing global warming is to minimise the emission of greenhouse gasses (GHGs). A common approach to informing people about the link between behaviour and climate change rests on developing GHG calculators that quantify the ‘carbon footprint’ of a product, a sector or an actor....... There is, however, an abundance of GHG calculators that rely on very different premises and give very different estimates of carbon footprints. In this chapter, we compare and analyse the main principles of calculating carbon footprints, and discuss how calculators can inform (or misinform) people who wish...

  10. Resource Footprints are Good Proxies of Environmental Damage

    NARCIS (Netherlands)

    Steinmann, Z.J.N.; Schipper, A.M.; Hauck, M.; Giljum, S.; Wernet, G.; Huijbregts, M.A.J.

    2017-01-01

    Environmental footprints are increasingly used to quantify and compare environmental impacts of for example products, technologies, households, or nations. This has resulted in a multitude of footprint indicators, ranging from relatively simple measures of resource use (water, energy, materials) to

  11. Investigating the inventory and characterization aspects of footprinting methods. Lessons for the classification and integration of footprints

    NARCIS (Netherlands)

    Fang, K.; Heijungs, R.

    2015-01-01

    Inventory and characterization schemes play different roles in shaping a variety of footprint indicators. This paper performs a systematic and critical investigation of the hidden inventory aspect and characterization aspect of selected footprints with implications for classification and integration

  12. Water neutral: reducing and ofsetting water footprints

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert

    2008-01-01

    During the past few years the concept of the ‘water footprint’ has started to receive recognition within governments, non-governmental organizations, businesses and media as a useful indicator of water use. The increased interest in the water-footprint concept has prompted the question about what

  13. Spatially and temporally explicit water footprint accounting

    NARCIS (Netherlands)

    Mekonnen, Mesfin

    2011-01-01

    The earth’s freshwater resources are subject to increasing pressure in the form of consumptive water use and pollution (Postel, 2000; WWAP, 2003, 2006, 2009). Quantitative assessment of the green, blue and grey water footprint of global production and consumption can be regarded as a key in

  14. Our Footprints on the Sands of Time

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 11; Issue 1. Our Footprints on the Sands of Time. Partha P Majumder D Balasubramanian. General Article Volume 11 Issue 1 January 2006 pp 32-50. Fulltext. Click here to view fulltext PDF. Permanent link:

  15. European Water Footprint Scenarios for 2050

    NARCIS (Netherlands)

    Ercin, Ertug; Hoekstra, Arjen Ysbert

    2016-01-01

    This study develops water footprint scenarios for Europe for 2050, at the country level, based on projections regarding population and economic growth, production and trade patterns, consumption patterns (diets and bioenergy use) and technological development. The objective is to estimate possible

  16. Water footprints and sustainable water allocation

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert; Chapagain, Ashok; Zhang, Guoping

    2016-01-01

    Water Footprint Assessment (WFA) is a quickly growing research field. This Special Issue contains a selection of papers advancing the field or showing innovative applications. The first seven papers are geographic WFA studies, from an urban to a continental scale; the next five papers have a global

  17. The water footprint of food aid

    NARCIS (Netherlands)

    Jackson, Nicole; Konar, Megan; Hoekstra, Arjen Ysbert

    2015-01-01

    Food aid is a critical component of the global food system, particularly when emergency situations arise. For the first time, we evaluate the water footprint of food aid. To do this, we draw on food aid data from theWorld Food Programme and virtual water content estimates from WaterStat. We find

  18. Toward a nitrogen footprint calculator for Tanzania

    NARCIS (Netherlands)

    Hutton, Mary Olivia; Leach, A.M.; Leip, Adrian; Galloway, J.N.; Bekunda, M.; Sullivan, C.; Lesschen, J.P.

    2017-01-01

    We present the first nitrogen footprint model for a developing country: Tanzania. Nitrogen (N) is a crucial element for agriculture and human nutrition, but in excess it can cause serious environmental damage. The Sub-Saharan African nation of Tanzania faces a two-sided nitrogen problem: while there

  19. The importance of carbon footprint estimation boundaries.

    Science.gov (United States)

    Matthews, H Scott; Hendrickson, Chris T; Weber, Christopher L

    2008-08-15

    Because of increasing concern about global climate change and carbon emissions as a causal factor, many companies and organizations are pursuing "carbon footprint" projects to estimate their own contributions to global climate change. Protocol definitions from carbon registries help organizations analyze their footprints. The scope of these protocols varies but generally suggests estimating only direct emissions and emissions from purchased energy, with less focus on supply chain emissions. In contrast approaches based on comprehensive environmental life-cycle assessment methods are available to track total emissions across the entire supply chain, and experience suggests that following narrowly defined estimation protocols will generally lead to large underestimates of carbon emissions for providing products and services. Direct emissions from an industry are, on average, only 14% of the total supply chain carbon emissions (often called Tier 1 emissions), and direct emissions plus industry energy inputs are, on average, only 26% of the total supply chain emissions (often called Tier 1 and 2 emissions). Without a full knowledge of their footprints, firms will be unable to pursue the most cost-effective carbon mitigation strategies. We suggest that firms use the screening-level analysis described here to set the bounds of their footprinting strategy to ensure that they do not ignore large sources of environmental effects across their supply chains. Such information can help firms pursue carbon and environmental emission mitigation projects not only within their own plants but also across their supply chain.

  20. How to Calculate Your Institution's Nitrogen Footprint ...

    Science.gov (United States)

    The Nitrogen Footprint Tool (NFT) allows institutions to estimate and manage their nitrogen footprint, and EPA’s Sustainable and Healthy Communities program is supporting an effort to test and expand this approach at multiple colleges, universities and institutions across the US. The growing awareness of sustainability has prompted many institutions of higher education to assess and manage their environmental impact. Many universities have programs to decrease their carbon footprint, but carbon represents just one facet of an institution’s environmental impact. Nitrogen is also important because a university’s nitrogen loss to the environment contributes to smog, soil acidification, eutrophication, biodiversity loss, the enhanced greenhouse effect, stratospheric ozone depletion, and more. The attached data template and user’s manual was based on the first NFT created for a university (University of Virginia), and tested in 6 additional institutions (including University of New Hampshire, Brown University, Eastern Mennonite University, Colorado State University). The footprint includes nitrogen released to the environment due to: 1) food consumption; 2) food production, reported by specific food categories (vegetable products, seafood, dairy and eggs, meat); 3) research animals; 4) transportation, including fleet vehicles and commuter vehicles; 5) fertilizer application; and 6) utilities, separated into electricity and heating. The data template and

  1. Measuring the Global Footprint of an MBA

    Science.gov (United States)

    Alon, Ilan; McAllaster, Craig M.

    2009-01-01

    This article discusses the concept that is termed the "global footprint" as a measure of a university's internationalization efforts along multiple dimensions. A university's globalization is multidimensional and includes students, faculty, and curricula. In this article, the authors demonstrate their conceptualization of the global…

  2. Machinery Footprint, October 2012 (MECS 2006)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-17

    Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.

  3. Machinery Footprint, December 2010 (MECS 2006)

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-06-01

    Manufacturing energy and carbon footprints map fuel energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing industry sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released due to the combustion of fuel. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high-level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The energy data is primarily provided by the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), and therefore reflects consumption in the year 2006, when the survey was last completed.

  4. The water footprint of tourism in Spain

    NARCIS (Netherlands)

    Cazcarro, I.; Hoekstra, Arjen Ysbert; Sánchez Chóliz, J.

    2014-01-01

    This study complements the water footprint (WF) estimations for Spain, incorporating insights of the process analysis and input–output (IO) analysis. We evaluate the virtual (both blue and green consumed) water trade of agricultural and industrial products, but also of services, especially through

  5. The auroral footprint of Enceladus on Saturn.

    Science.gov (United States)

    Pryor, Wayne R; Rymer, Abigail M; Mitchell, Donald G; Hill, Thomas W; Young, David T; Saur, Joachim; Jones, Geraint H; Jacobsen, Sven; Cowley, Stan W H; Mauk, Barry H; Coates, Andrew J; Gustin, Jacques; Grodent, Denis; Gérard, Jean-Claude; Lamy, Laurent; Nichols, Jonathan D; Krimigis, Stamatios M; Esposito, Larry W; Dougherty, Michele K; Jouchoux, Alain J; Stewart, A Ian F; McClintock, William E; Holsclaw, Gregory M; Ajello, Joseph M; Colwell, Joshua E; Hendrix, Amanda R; Crary, Frank J; Clarke, John T; Zhou, Xiaoyan

    2011-04-21

    Although there are substantial differences between the magnetospheres of Jupiter and Saturn, it has been suggested that cryovolcanic activity at Enceladus could lead to electrodynamic coupling between Enceladus and Saturn like that which links Jupiter with Io, Europa and Ganymede. Powerful field-aligned electron beams associated with the Io-Jupiter coupling, for example, create an auroral footprint in Jupiter's ionosphere. Auroral ultraviolet emission associated with Enceladus-Saturn coupling is anticipated to be just a few tenths of a kilorayleigh (ref. 12), about an order of magnitude dimmer than Io's footprint and below the observable threshold, consistent with its non-detection. Here we report the detection of magnetic-field-aligned ion and electron beams (offset several moon radii downstream from Enceladus) with sufficient power to stimulate detectable aurora, and the subsequent discovery of Enceladus-associated aurora in a few per cent of the scans of the moon's footprint. The footprint varies in emission magnitude more than can plausibly be explained by changes in magnetospheric parameters--and as such is probably indicative of variable plume activity.

  6. Using extant taxa to inform studies of fossil footprints

    Science.gov (United States)

    Falkingham, Peter; Gatesy, Stephen

    2016-04-01

    Attempting to use the fossilized footprints of extinct animals to study their palaeobiology and palaeoecology is notoriously difficult. The inconvenient extinction of the trackmaker makes direct correlation between footprints and foot far from straightforward. However, footprints are the only direct evidence of vertebrate motion recorded in the fossil record, and are potentially a source of data on palaeobiology that cannot be obtained from osteological remains alone. Our interests lie in recovering information about the movements of dinosaurs from their tracks. In particular, the Hitchcock collection of early Jurassic tracks held at the Beneski Museum of Natural History, Amherst, provide a rare look into the 3D form of tracks at and below the surface the animal walked on. Breaking naturally along laminations into 'track books', the specimens present sediment deformation at multiple levels, and in doing so record more of the foot's motion than a single surface might. In order to utilize this rich information source to study the now extinct trackmakers, the process of track formation must be understood at a fundamental level; the interaction of the moving foot and compliant substrate. We used bi-planar X-ray techniques (X-ray Reconstruction of Moving Morphology) to record the limb and foot motions of a Guineafowl traversing both granular and cohesive substrates. This data was supplemented with photogrammetric records of the resultant track surfaces, as well as the motion of metal beads within the sediment, to provide a full experimental dataset of foot and footprint formation. The physical experimental data was used to generate computer simulations of the process using high performance computing and the Discrete Element Method. The resultant simulations showed excellent congruence with reality, and enabled visualization within the sediment volume, and throughout the track-forming process. This physical and virtual experimental set-up has provided major insight into

  7. Carbon footprint and cost-effectiveness of cataract surgery.

    Science.gov (United States)

    Venkatesh, Rengaraj; van Landingham, Suzanne W; Khodifad, Ashish M; Haripriya, Aravind; Thiel, Cassandra L; Ramulu, Pradeep; Robin, Alan L

    2016-01-01

    This article raises awareness about the cost-effectiveness and carbon footprint of various cataract surgery techniques, comparing their relative carbon emissions and expenses: manual small-incision cataract surgery (MSICS), phacoemulsification, and femtosecond laser-assisted cataract surgery. As the most commonly performed surgical procedure worldwide, cataract surgery contributes significantly to global climate change. The carbon footprint of a single phacoemulsification cataract surgery is estimated to be comparable to that of a typical person's life for 1 week. Phacoemulsification has been estimated to be between 1.4 and 4.7 times more expensive than MSICS; however, given the lower degree of postoperative astigmatism and other potential complications, phacoemulsification may still be preferable to MSICS in relatively resource-rich settings requiring high levels of visual function. Limited data are currently available regarding the environmental and financial impact of femtosecond laser-assisted cataract surgery; however, in its current form, it appears to be the least cost-effective option. Cataract surgery has a high value to patients. The relative environmental impact and cost of different types of cataract surgery should be considered as this treatment becomes even more broadly available globally and as new technologies are developed and implemented.

  8. Determination of the single scattering albedo and direct radiative forcing of biomass burning aerosol with data from the MODIS (Moderate Resolution Imaging Spectroradiometer) satellite instrument

    Science.gov (United States)

    Zhu, Li

    Biomass burning aerosols absorb and scatter solar radiation and therefore affect the energy balance of the Earth-atmosphere system. The single scattering albedo (SSA), the ratio of the scattering coefficient to the extinction coefficient, is an important parameter to describe the optical properties of aerosols and to determine the effect of aerosols on the energy balance of the planet and climate. Aerosol effects on radiation also depend strongly on surface albedo. Large uncertainties remain in current estimates of radiative impacts of biomass burning aerosols, due largely to the lack of reliable measurements of aerosol and surface properties. In this work we investigate how satellite measurements can be used to estimate the direct radiative forcing of biomass burning aerosols. We developed a method using the critical reflectance technique to retrieve SSA from the Moderate Resolution Imaging Spectroradiometer (MODIS) observed reflectance at the top of the atmosphere (TOA). We evaluated MODIS retrieved SSAs with AErosol RObotic NETwork (AERONET) retrievals and found good agreements within the published uncertainty of the AERONET retrievals. We then developed an algorithm, the MODIS Enhanced Vegetation Albedo (MEVA), to improve the representations of spectral variations of vegetation surface albedo based on MODIS observations at the discrete 0.67, 0.86, 0.47, 0.55, 1.24, 1.64, and 2.12 mu-m channels. This algorithm is validated using laboratory measurements of the different vegetation types from the Amazon region, data from the Johns Hopkins University (JHU) spectral library, and data from the U.S. Geological Survey (USGS) digital spectral library. We show that the MEVA method can improve the accuracy of flux and aerosol forcing calculations at the TOA compared to more traditional interpolated approaches. Lastly, we combine the MODIS retrieved biomass burning aerosol SSA and the surface albedo spectrum determined from the MEVA technique to calculate TOA flux and

  9. Functional footprinting of regulatory DNA.

    Science.gov (United States)

    Vierstra, Jeff; Reik, Andreas; Chang, Kai-Hsin; Stehling-Sun, Sandra; Zhou, Yuanyue; Hinkley, Sarah J; Paschon, David E; Zhang, Lei; Psatha, Nikoletta; Bendana, Yuri R; O'Neil, Colleen M; Song, Alexander H; Mich, Andrea K; Liu, Pei-Qi; Lee, Gary; Bauer, Daniel E; Holmes, Michael C; Orkin, Stuart H; Papayannopoulou, Thalia; Stamatoyannopoulos, George; Rebar, Edward J; Gregory, Philip D; Urnov, Fyodor D; Stamatoyannopoulos, John A

    2015-10-01

    Regulatory regions harbor multiple transcription factor (TF) recognition sites; however, the contribution of individual sites to regulatory function remains challenging to define. We describe an approach that exploits the error-prone nature of genome editing-induced double-strand break repair to map functional elements within regulatory DNA at nucleotide resolution. We demonstrate the approach on a human erythroid enhancer, revealing single TF recognition sites that gate the majority of downstream regulatory function.

  10. Does footprint depth correlate with foot motion and pressure?

    Science.gov (United States)

    Bates, K. T.; Savage, R.; Pataky, T. C.; Morse, S. A.; Webster, E.; Falkingham, P. L.; Ren, L.; Qian, Z.; Collins, D.; Bennett, M. R.; McClymont, J.; Crompton, R. H.

    2013-01-01

    Footprints are the most direct source of evidence about locomotor biomechanics in extinct vertebrates. One of the principal suppositions underpinning biomechanical inferences is that footprint geometry correlates with dynamic foot pressure, which, in turn, is linked with overall limb motion of the trackmaker. In this study, we perform the first quantitative test of this long-standing assumption, using topological statistical analysis of plantar pressures and experimental and computer-simulated footprints. In computer-simulated footprints, the relative distribution of depth differed from the distribution of both peak and pressure impulse in all simulations. Analysis of footprint samples with common loading inputs and similar depths reveals that only shallow footprints lack significant topological differences between depth and pressure distributions. Topological comparison of plantar pressures and experimental beach footprints demonstrates that geometry is highly dependent on overall print depth; deeper footprints are characterized by greater relative forefoot, and particularly toe, depth than shallow footprints. The highlighted difference between ‘shallow’ and ‘deep’ footprints clearly emphasizes the need to understand variation in foot mechanics across different degrees of substrate compliance. Overall, our results indicate that extreme caution is required when applying the ‘depth equals pressure’ paradigm to hominin footprints, and by extension, those of other extant and extinct tetrapods. PMID:23516064

  11. Age, Sex and Stature Estimation from Footprint Dimensions

    Directory of Open Access Journals (Sweden)

    Paurbhi Singh

    2017-04-01

    Full Text Available Objectives: The present study was carried out to evaluate the utility and reliability of footprint dimensions in age, sex and stature determination in the North Indian population. Materials and Methods: This study was carried out using a sample of 400 people (146 female and 254 male aged 10-65 years in Uttar Pradesh, North Western state of India. Footprints of both feet were taken bilaterally, and thus a total of 800 prints were obtained. A cluster of 7 measurements were taken carefully with the help of a scientific scale ruler. Five measurements were length dimensions from the most anterior part of the toe (T1–T5 to the mid rear heel point and two were breadth dimensions from both left and right footprints: breadth at ball (BBAL, breadth at heel (BHEL and 2 indexes: heel-ball Index (HBI and footprint index (FPI. All data were analyzed statistically using Student’s t-test, regression coefficient and Pearson’s correlation for the estimation of sex on the basis of footprint dimensions. Results: The T1 in left footprints was greater than right footprints in males, while T1 and BBAL were both found to be greater in left footprints than right footprints in females. All the seven foot dimensions were higher in males than females. Conclusion: There were statistically significant differences observed in all footprint dimensions between the male and female footprints except LFPI, LHBI, and RHBI.

  12. Taiwan’s Ecological Footprint (1994–2011

    Directory of Open Access Journals (Sweden)

    Yung-Jaan Lee

    2014-09-01

    Full Text Available According to the 2011 edition of the National Footprint Accounts (NFA published by the Global Footprint Network (GFN, humankind consumed the resources and services of 1.5 planets in 2008; the corresponding number in 1961 was 0.7 planets. North Americans have an ecological footprint of 8.7 global hectares per person whereas Africans have a footprint of only 1.4 global hectares per person. The global mean biological capacity is only 1.8 global hectares per person so human beings are overshooting ecological resources. The ecological footprint measures the resources that are consumed by humans from the biosphere, and serves as an index of the sustainability of development. The NFA includes the ecological footprints of over 200 countries and regions, but not Taiwan. Hence, Taiwan must establish and update its own ecological footprint databases. Ecological footprint is one indicator of the sustainability of development, and can be compared across nations. This study extends previous studies by analyzing Taiwan’s ecological footprint from 2008–2011. With reference to the ecological footprint accounts of the Global Footprint Network and the Taiwan’s ecological footprint analysis for 1997–2007, this study presents Taiwan’s ecological footprint from 2008–2011. Most of the data that are used herein are taken from the Food and Agriculture Organization, the International Energy Agency, Taiwan’s Council of Agriculture and Taiwan’s National Development Council. The results thus obtained reveal that Taiwan’s ecological footprint from 2008–2011 exceeded that from 1997–2007. To respond to this trend toward un-sustainable development and to help Taiwan move toward sustainability, carbon reduction and energy saving policies should be implemented to effectively manage Taiwan’s ecological resources.

  13. Saturn satellites

    International Nuclear Information System (INIS)

    Ruskol, E.L.

    1981-01-01

    The characteristics of the Saturn satellites are discussed. The satellites close to Saturn - Janus, Mimas, Enceladus, Tethys, Dione and Rhea - rotate along the circular orbits. High reflectivity is attributed to them, and the density of the satellites is 1 g/cm 3 . Titan is one of the biggest Saturn satellites. Titan has atmosphere many times more powerful than that of Mars. The Titan atmosphere is a peculiar medium with a unique methane and hydrogen distribution in the whole Solar system. The external satellites - Hyperion, Japetus and Phoebe - are poorly investigated. Neither satellite substance density, nor their composition are known. The experimental data on the Saturn rings obtained on the ''Pioneer-11'' and ''Voyager-1'' satellites are presented [ru

  14. Carbon footprint estimation of municipal water cycle

    Science.gov (United States)

    Bakhshi, Ali A.

    2009-11-01

    This research investigates the embodied energy associated with water use. A geographic information system (GIS) was tested using data from Loudoun County, Virginia. The objective of this study is to estimate the embodied energy and carbon emission levels associated with water service at a geographical location and to improve for sustainability planning. Factors that affect the carbon footprint were investigated and the use of a GIS based model as a sustainability planning framework was evaluated. The carbon footprint metric is a useful tool for prediction and measurement of a system's sustainable performance over its expected life cycle. Two metrics were calculated: tons of carbon dioxide per year to represent the contribution to global warming and watt-hrs per gallon to show the embodied energy associated with water consumption. The water delivery to the building, removal of wastewater from the building and associated treatment of water and wastewater create a sizable carbon footprint; often the energy attributed to this water service is the greatest end use of electrical energy. The embodied energy in water depends on topographical characteristics of the area's local water supply, the efficiency of the treatment systems, and the efficiency of the pumping stations. The questions answered by this research are: What is the impact of demand side sustainable water practices on the embodied energy as represented by a comprehensive carbon footprint? What are the major energy consuming elements attributed to the system? What is a viable and visually identifiable tool to estimate the carbon footprint attributed to those Greenhouse Gas (GHG) producing elements? What is the embodied energy and emission associated with water use delivered to a building? Benefits to be derived from a standardized GIS applied carbon footprint estimation approach include: (1) Improved environmental and economic information for the developers, water and wastewater processing and municipal

  15. Tracking the global footprint of fisheries

    Science.gov (United States)

    Kroodsma, David A.; Mayorga, Juan; Hochberg, Timothy; Miller, Nathan A.; Boerder, Kristina; Ferretti, Francesco; Wilson, Alex; Bergman, Bjorn; White, Timothy D.; Block, Barbara A.; Woods, Paul; Sullivan, Brian; Costello, Christopher; Worm, Boris

    2018-02-01

    Although fishing is one of the most widespread activities by which humans harvest natural resources, its global footprint is poorly understood and has never been directly quantified. We processed 22 billion automatic identification system messages and tracked >70,000 industrial fishing vessels from 2012 to 2016, creating a global dynamic footprint of fishing effort with spatial and temporal resolution two to three orders of magnitude higher than for previous data sets. Our data show that industrial fishing occurs in >55% of ocean area and has a spatial extent more than four times that of agriculture. We find that global patterns of fishing have surprisingly low sensitivity to short-term economic and environmental variation and a strong response to cultural and political events such as holidays and closures.

  16. AcquisitionFootprintAttenuationDrivenbySeismicAttributes

    Directory of Open Access Journals (Sweden)

    Cuellar-Urbano Mayra

    2014-04-01

    Full Text Available Acquisition footprint, one of the major problems that PEMEX faces in seismic imaging, is noise highly correlated to the geometric array of sources and receivers used for onshore and offshore seismic acquisitions. It prevails in spite of measures taken during acquisition and data processing. This pattern, throughout the image, is easily confused with geological features and misguides seismic attribute computation. In this work, we use seismic data from PEMEX Exploración y Producción to show the conditioning process for removing random and coherent noise using linear filters. Geometric attributes used in a workflow were computed for obtaining an acquisition footprint noise model and adaptively subtract it from the seismic data.

  17. Human Decisions: Nitrogen Footprints and Environmental Effects

    Science.gov (United States)

    Leach, A. M.; Bleeker, A.; Galloway, J. N.; Erisman, J.

    2012-12-01

    Human consumption choices are responsible for growing losses of reactive nitrogen (Nr) to the environment. Once in the environment, Nr can cause a cascade of negative impacts such as smog, acid rain, coastal eutrophication, climate change, and biodiversity loss. Although all humans must consume nitrogen as protein, the food production process releases substantial Nr to the environment. This dilemma presents a challenge: how do we feed a growing population while reducing Nr? Although top-down strategies to reduce Nr losses (e.g., emissions controls) are necessary, the bottom-up strategies focusing on personal consumption patterns will be imperative to solve the nitrogen challenge. Understanding the effects of different personal choices on Nr losses and the environment is an important first step for this strategy. This paper will utilize information and results from the N-Calculator, a per capita nitrogen footprint model (www.N-Print.org), to analyze the impact of different food consumption patterns on a personal food nitrogen footprint and the environment. Scenarios will analyze the impact of the following dietary patterns on the average United States (28 kg Nr/cap/yr) food nitrogen footprint: 1) Consuming only the recommended protein as defined by the WHO and the USDA; 2) Reducing food waste by 50%; 3) Consuming a vegetarian diet; 4) Consuming a vegan diet; 5) Consuming a demitarian diet (replacing half of animal protein consumption with vegetable protein); 6) Substituting chicken (a more efficient animal protein) with beef (a less efficient animal protein); 7) Consuming sustainably-produced food; and 8) Using advanced wastewater treatment. Preliminary results suggest that widespread advanced wastewater treatment with nutrient removal technology and halving food waste would each reduce the US personal food nitrogen footprint by 13%. In addition, reducing protein consumption to the recommended levels would reduce the footprint by about 42%. Combining these measures

  18. Do parents leave a smaller carbon footprint?

    DEFF Research Database (Denmark)

    Nordström, Leif Jonas; Shogren, Jason F.; Thunström, Linda

    Do parents leave a smaller carbon footprint? While becoming a parent is transformational as one focuses more on the future, the time constraints are more binding right now. Using a unique data set that allows us to compare CO2 emissions from Swedish two-adult households with and without children......, we find becoming a Swedish parent causes a person to leave a larger carbon ootprint—due to changes in transportation patterns and food consumption choices....

  19. Clock Management Data Analysis for Satellite Communications

    National Research Council Canada - National Science Library

    Gross, Rachel; Melkers, Raimond

    2005-01-01

    The U.S. Naval Research Laboratory has installed GPS-based timing systems in several Defense Satellite Communication System "DSCS-III" satellite communication facilities to support the Single Channel Transponder "SCT" program...

  20. [Evolvement of ecological footprint model representing ecological carrying capacity].

    Science.gov (United States)

    Cao, Shu-yan; Xie, Gao-di

    2007-06-01

    Ecological footprint (EF) is an important index of ecological carrying capacity. The original EF model is excellent in simplicity, aggregation, comparability, and lifelikeness in presenting results, but short in predictability, configuration, and applicability. To overcome these shortcomings, many researches were conducted to modify and promote the EF model, and developed it from static with single time scale to diversified ones, which included: 1) time series EF model, 2) input-output analysis based EF model, 3) integrated assessment incorporated EF model, 4) land disturbance degree based EF model, and 5) life cycle analysis based EF model, or component EF model. The function of EF as a measurement of ecological carrying capacity was significantly improved, but its accuracy and integrality still need to be advanced.

  1. The industrial water footprint of zippers.

    Science.gov (United States)

    Zhang, Yin; Wu, Xiong Ying; Wang, Lai Li; Ding, Xue Mei

    2014-01-01

    Industrial production of apparel consumes large quantity of freshwater and discharges effluents that intensify the problem of freshwater shortage and water pollution. The industrial water footprint (IWF) of a piece of apparel includes the water footprint (WF) of the fabric, apparel accessories (e.g. zipper, fastener, sewing thread) and industrial production processes. The objective of this paper is to carry out a pilot study on IWF accounting for three kinds of typical zipper (i.e. metal zipper, polyethylene terephthalate (PET) zipper and polyoxymethylene copolymer (Co-POM) zipper) that are commonly used for apparel production. The results reveal that product output exerts a remarkable influence on zipper's average IWF. Metal zipper has the largest IWF and followed by Co-POM zipper and PET zipper. Painting, dyeing and primary processing are the top three water-consuming processes and contribute about 90% of the zipper's IWF. Painting consumes the largest amount of freshwater among all processes and occupies more than 50% of the zipper's IWF. In addition, the grey water footprint (WFgrey) provides the greatest contribution, more than 80%, to the zipper's IWF. Based on these results, this paper also provides several strategies aimed at water economization and pollution reduction during industrial production of zipper.

  2. Water Footprints and Sustainable Water Allocation

    Directory of Open Access Journals (Sweden)

    Arjen Y. Hoekstra

    2015-12-01

    Full Text Available Water Footprint Assessment (WFA is a quickly growing research field. This Special Issue contains a selection of papers advancing the field or showing innovative applications. The first seven papers are geographic WFA studies, from an urban to a continental scale; the next five papers have a global scope; the final five papers focus on water sustainability from the business point of view. The collection of papers shows that the historical picture of a town relying on its hinterland for its supply of water and food is no longer true: the water footprint of urban consumers is global. It has become clear that wise water governance is no longer the exclusive domain of government, even though water is and will remain a public resource with government in a primary role. With most water being used for producing our food and other consumer goods, and with product supply chains becoming increasingly complex and global, there is a growing awareness that consumers, companies and investors also have a key role. The interest in sustainable water use grows quickly, in both civil society and business communities, but the poor state of transparency of companies regarding their direct and indirect water use implies that there is still a long way to go before we can expect that companies effectively contribute to making water footprints more sustainable at a relevant scale.

  3. Ecological Footprint Analysis (EFA) for the Chicago ...

    Science.gov (United States)

    Because of its computational simplicity, Ecological Footprint Analysis (EFA) has been extensively deployed for assessing the sustainability of various environmental systems. In general, EFA aims at capturing the impacts of human activity on the environment by computing the amount of bioproductive land that can support population consumption and the concomitant generation of waste in any given area. Herein, we deploy EFA for assessing the sustainability of an urban system, specifically, the Chicago Metropolitan Area (CMA). We estimate the trend in EF for the CMA between 1990 and 2015 to determine if the metropolitan area is moving towards or away from sustainable development. At the outset of the estimation, we consider six categories of bioproductive land for the analysis, namely, energy, arable, forest, pasture, and built-up lands as well as lake area. In addition, we allocate the various items consumed and/or produced by the area’s population to one of these categories. Subsequently, we computed the CMA’s ecological demand, or footprint, by quantifying the amount per capita of each land/space category required to sustain the consumption of the area’s population. Moreover, we determined the CMA’s ecological supply by accounting for the amount per capita of each land/space category that the area is providing to the environment. Finally, the ecological balance is computed by subtracting the area’s footprint from the corresponding ecological supply. We e

  4. Human footprint variation while performing load bearing tasks.

    Directory of Open Access Journals (Sweden)

    Cara M Wall-Scheffler

    Full Text Available Human footprint fossils have provided essential evidence about the evolution of human bipedalism as well as the social dynamics of the footprint makers, including estimates of speed, sex and group composition. Generally such estimates are made by comparing footprint evidence with modern controls; however, previous studies have not accounted for the variation in footprint dimensions coming from load bearing activities. It is likely that a portion of the hominins who created these fossil footprints were carrying a significant load, such as offspring or foraging loads, which caused variation in the footprint which could extend to variation in any estimations concerning the footprint's maker. To identify significant variation in footprints due to load-bearing tasks, we had participants (N = 30, 15 males and 15 females walk at a series of speeds carrying a 20kg pack on their back, side and front. Paint was applied to the bare feet of each participant to create footprints that were compared in terms of foot length, foot width and foot area. Female foot length and width increased during multiple loaded conditions. An appreciation of footprint variability associated with carrying loads adds an additional layer to our understanding of the behavior and morphology of extinct hominin populations.

  5. Satellite RNAs and Satellite Viruses.

    Science.gov (United States)

    Palukaitis, Peter

    2016-03-01

    Satellite RNAs and satellite viruses are extraviral components that can affect either the pathogenicity, the accumulation, or both of their associated viruses while themselves being dependent on the associated viruses as helper viruses for their infection. Most of these satellite RNAs are noncoding RNAs, and in many cases, have been shown to alter the interaction of their helper viruses with their hosts. In only a few cases have the functions of these satellite RNAs in such interactions been studied in detail. In particular, work on the satellite RNAs of Cucumber mosaic virus and Turnip crinkle virus have provided novel insights into RNAs functioning as noncoding RNAs. These effects are described and potential roles for satellite RNAs in the processes involved in symptom intensification or attenuation are discussed. In most cases, models describing these roles involve some aspect of RNA silencing or its suppression, either directly or indirectly involving the particular satellite RNA.

  6. Centriolar satellites

    DEFF Research Database (Denmark)

    Tollenaere, Maxim A X; Mailand, Niels; Bekker-Jensen, Simon

    2015-01-01

    Centriolar satellites are small, microscopically visible granules that cluster around centrosomes. These structures, which contain numerous proteins directly involved in centrosome maintenance, ciliogenesis, and neurogenesis, have traditionally been viewed as vehicles for protein trafficking towa...... highlight newly discovered regulatory mechanisms targeting centriolar satellites and their functional status, and we discuss how defects in centriolar satellite components are intimately linked to a wide spectrum of human diseases.......Centriolar satellites are small, microscopically visible granules that cluster around centrosomes. These structures, which contain numerous proteins directly involved in centrosome maintenance, ciliogenesis, and neurogenesis, have traditionally been viewed as vehicles for protein trafficking...... towards the centrosome. However, the recent identification of several new centriolar satellite components suggests that this model offers only an incomplete picture of their cellular functions. While the mechanisms controlling centriolar satellite status and function are not yet understood in detail...

  7. Satellite theory

    Science.gov (United States)

    Kozai, Y.

    1981-04-01

    The dynamical characteristics of the natural satellite of Mars, Jupiter, Saturn, Uranus and Neptune are analyzed on the basis of the solar tidal perturbation factor and the oblateness factor of the primary planet for each satellite. For the inner satellites, for which the value of the solar tidal factor is much smaller than the planetary oblateness factor, it is shown that the eccentricity and inclination of satellite orbits are generally very small and almost constant; several pairs of inner satellites are also found to exhibit commensurable mean motions, or secular accelerations in mean longitude. In the case of the outer satellites, for which solar perturbations are dominant, secular perturbations and long-period perturbations may be derived by the solution of equations of motion reduced to one degree of freedom. The existence of a few satellites, termed intermediary satellites, for which the solar tidal perturbation is on the order of the planetary oblateness factor, is also observed, and the pole of the orbital plane of the satellite is noted to execute a complex motion around the pole of the planet or the orbital plane of the planet.

  8. Defining System Boundaries of an Institution Nitrogen Footprint.

    Science.gov (United States)

    de la Reguera, Elizabeth; Castner, Elizabeth A; Galloway, James N; Leach, Allison M; Leary, Neil; Tang, Jianwu

    2017-04-01

    A nitrogen (N) footprint quantifies the amount of reactive nitrogen released to the environment and can be measured at different scales. The N footprint of a university includes activities and consumption within its geographic boundaries as well as activities that support the institution. Determining system bounds of an N footprint depends on the institution's mission and provides a common baseline for comparison. A comparison of three scopes of the N footprint, which describe how emissions are directly related to an institution's activities, was conducted for seven institutions. Scopes follow the established definition for the carbon footprint. In this article, the authors propose a new system bounds definition (core campus versus adjunct). Two case studies were explored: how the N footprint of Dickinson College changed with air travel, and how the N footprint of the Marine Biological Laboratory changed with scientific research. Of the three scopes, scope 3 was consistently the largest proportion of the N footprint for all seven institutions. The core campus activities of Dickinson College made up 99 percent of its N footprint, with air travel making up the remaining 1 percent. The Marine Biological Laboratory's core campus activities made up 51 percent of its N footprint and the scientific research made up the remaining 49 percent. Institutions should define system bounds based on their mission and stay consistent with their boundaries following the baseline year. The core campus footprint could be used to compare institution footprints using consistent system bounds. How institutions define their boundaries will impact the recorded amount of nitrogen as well as how the institution will set reduction strategies.

  9. Carbon footprint as environmental performance indicator for the manufacturing industry

    DEFF Research Database (Denmark)

    Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

    2010-01-01

    With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

  10. Taiwan’s Ecological Footprint (1994–2011)

    OpenAIRE

    Yung-Jaan Lee; Li-Pei Peng

    2014-01-01

    According to the 2011 edition of the National Footprint Accounts (NFA) published by the Global Footprint Network (GFN), humankind consumed the resources and services of 1.5 planets in 2008; the corresponding number in 1961 was 0.7 planets. North Americans have an ecological footprint of 8.7 global hectares per person whereas Africans have a footprint of only 1.4 global hectares per person. The global mean biological capacity is only 1.8 global hectares per person so human beings are overshoot...

  11. [Comparison of sustainable development status in Heilongjiang Province based on traditional ecological footprint method and emergy ecological footprint method].

    Science.gov (United States)

    Chen, Chun-feng; Wang, Hong-yan; Xiao, Du-ning; Wang, Da-qing

    2008-11-01

    By using traditional ecological footprint method and its modification, emergy ecological footprint method, the sustainable development status of Heilongjiang Province in 2005 was analyzed. The results showed that the ecological deficits of Heilongjiang Province in 2005 based on emergy and conventional ecological footprint methods were 1.919 and 0.6256 hm2 x cap(-1), respectively. The ecological footprint value based on the two methods both exceeded its carrying capacity, which indicated that the social and economic development of the study area was not sustainable. Emergy ecological footprint method was used to discuss the relationships between human's material demand and ecosystem resources supply, and more stable parameters such as emergy transformity and emergy density were introduced into emergy ecological footprint method, which overcame some of the shortcomings of conventional ecological method.

  12. The greenhouse emissions footprint of free-range eggs.

    Science.gov (United States)

    Taylor, R C; Omed, H; Edwards-Jones, G

    2014-01-01

    Eggs are an increasingly significant source of protein for human consumption, and the global poultry industry is the single fastest-growing livestock sector. In the context of international concern for food security and feeding an increasingly affluent human population, the contribution to global greenhouse-gas (GHG) emissions from animal protein production is of critical interest. We calculated the GHG emissions footprint for the fastest-growing sector of the UK egg market: free-range production in small commercial units on mixed farms. Emissions are calculated to current Intergovernmental Panel on Climate Change and UK standards (PAS2050): including direct, indirect, and embodied emissions from cradle to farm gate compatible with a full product life-cycle assessment. We present a methodology for the allocation of emissions between ruminant and poultry enterprises on mixed farms. Greenhouse gas emissions averaged a global warming potential of 2.2 kg of CO2e/dozen eggs, or 1.6 kg of CO2equivalent (e)/kg (assuming average egg weight of 60 g). One kilogram of protein from free-range eggs produces 0.2 kg of CO2e, lower than the emissions from white or red meat (based on both kg of meat and kg of protein). Of these emissions, 63% represent embodied carbon in poultry feed. A detailed GHG emissions footprint represents a baseline for comparison with other egg production systems and sources of protein for human consumption. Eggs represent a relatively low-carbon supply of animal protein, but their production is heavily dependent on cereals and soy, with associated high emissions from industrial nitrogen production, land-use change, and transport. Alternative sources of digestible protein for poultry diets are available, may be produced from waste processing, and would be an effective tool for reducing the industry's GHG emissions and dependence on imported raw materials.

  13. Satellite Radio

    Indian Academy of Sciences (India)

    Satellites have been a highly effective platform for multi- form broadcasts. This has led to a revival of the radio era. The satellite radio is a natural choice to bridge the digital gap. It has several novel features like selective addressing and error control. The value-added services from such systems are of particular interest.

  14. Satellite Communications

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Satellite Communications. Arthur C Clarke wrote a seminal paper in 1945 in wireless world. Use three satellites in geo-synchronous orbit to enable intercontinental communications. System could be realised in '50 to 100 years'

  15. Environmental footprints in the meat chain

    Science.gov (United States)

    Đekić, I.; Tomašević, I.

    2017-09-01

    The objective of this paper was to present environmental performance of the meat chain and highlight main environmental footprints. The meat sector is recognized as one of the leading polluting sectors in the food industry. The meat chain was analyzed from a five-link perspective introducing the following actors: farm(er)s, slaughterhouses, meat processors, customers and consumers. Meat production needs natural resources (water and energy) resulting in waste and waste water discharge. As an outcome it has a high influence on climate change in respect to global warming, acidification and eutrophication potentials and ozone depletion substances.

  16. The carbon footprint of Australian health care.

    Science.gov (United States)

    Malik, Arunima; Lenzen, Manfred; McAlister, Scott; McGain, Forbes

    2018-01-01

    Carbon footprints stemming from health care have been found to be variable, from 3% of the total national CO 2 equivalent (CO 2 e) emissions in England to 10% of the national CO 2 e emissions in the USA. We aimed to measure the carbon footprint of Australia's health-care system. We did an observational economic input-output lifecycle assessment of Australia's health-care system. All expenditure data were obtained from the 15 sectors of the Australian Institute of Health and Welfare for the financial year 2014-15. The Australian Industrial Ecology Virtual Laboratory (IELab) data were used to obtain CO 2 e emissions per AUS$ spent on health care. In 2014-15 Australia spent $161·6 billion on health care that led to CO 2 e emissions of about 35 772 (68% CI 25 398-46 146) kilotonnes. Australia's total CO 2 e emissions in 2014-15 were 494 930 kilotonnes, thus health care represented 35 772 (7%) of 494 930 kilotonnes total CO 2 e emissions in Australia. The five most important sectors within health care in decreasing order of total CO 2 e emissions were: public hospitals (12 295 [34%] of 35 772 kilotonnes CO 2 e), private hospitals (3635 kilotonnes [10%]), other medications (3347 kilotonnes [9%]), benefit-paid drugs (3257 kilotonnes [9%]), and capital expenditure for buildings (2776 kilotonnes [8%]). The carbon footprint attributed to health care was 7% of Australia's total; with hospitals and pharmaceuticals the major contributors. We quantified Australian carbon footprint attributed to health care and identified health-care sectors that could be ameliorated. Our results suggest the need for carbon-efficient procedures, including greater public health measures, to lower the impact of health-care services on the environment. None. Copyright © 2018 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license. Published by Elsevier Ltd.. All rights reserved.

  17. The Ecological Footprint of Industrialized countries

    Directory of Open Access Journals (Sweden)

    Irene Frassoldati

    2014-12-01

    Full Text Available To compare the carbon footprint of different nations and the per capita for each country allows us to visualize a problem often underestimated by our systems of production and consumption, which is based on inequality. There is a need to work on this problem because in sharing the liability and the global consequences, the effects that cannot continue, reveals a series of possibilities. It would require 3-6 planets equal to Earth in order to sustain a lifestyle like that of an inhabitant of North America in order to supporst all inhabitants on Earth.

  18. A Regional CO2 Observing System Simulation Experiment Using ASCENDS Observations and WRF-STILT Footprints

    Science.gov (United States)

    Wang, J. S.; Kawa, S. R.; Eluszkiewicz, J.; Collatz, G. J.; Mountain, M.; Henderson, J.; Nehrkorn, T.; Aschbrenner, R.; Zaccheo, T.

    2012-12-01

    Knowledge of the spatiotemporal variations in emissions and uptake of CO2 is hampered by sparse measurements. The recent advent of satellite measurements of CO2 concentrations is increasing the density of measurements, and the future mission ASCENDS (Active Sensing of CO2 Emissions over Nights, Days and Seasons) will provide even greater coverage and precision. Lagrangian atmospheric transport models run backward in time can quantify surface influences ("footprints") of diverse measurement platforms and are particularly well suited for inverse estimation of regional surface CO2 fluxes at high resolution based on satellite observations. We utilize the STILT Lagrangian particle dispersion model, driven by WRF meteorological fields at 40-km resolution, in a Bayesian synthesis inversion approach to quantify the ability of ASCENDS column CO2 observations to constrain fluxes at high resolution. This study focuses on land-based biospheric fluxes, whose uncertainties are especially large, in a domain encompassing North America. We present results based on realistic input fields for 2007. Pseudo-observation random errors are estimated from backscatter and optical depth measured by the CALIPSO satellite. We estimate a priori flux uncertainties based on output from the CASA-GFED (v.3) biosphere model and make simple assumptions about spatial and temporal error correlations. WRF-STILT footprints are convolved with candidate vertical weighting functions for ASCENDS. We find that at a horizontal flux resolution of 1 degree x 1 degree, ASCENDS observations are potentially able to reduce average weekly flux uncertainties by 0-8% in July, and 0-0.5% in January (assuming an error of 0.5 ppm at the Railroad Valley reference site). Aggregated to coarser resolutions, e.g. 5 degrees x 5 degrees, the uncertainty reductions are larger and more similar to those estimated in previous satellite data observing system simulation experiments.

  19. Marine Ecological Footprint of Italian Mediterranean Fisheries

    Directory of Open Access Journals (Sweden)

    Federica de Leo

    2014-10-01

    Full Text Available The capacity of marine and coastal ecosystems to sustain seafood production and consumption is seldom accounted for and is not included in the signals that guide economic development. In this article, we review estimates of marine and coastal areas aimed at sustaining catches for seafood consumption. The aim of this paper is the assessment of the interactions between the environment, intended as a set of ecological subsystems in natural equilibrium, including the marine ecosystem, and the process of fisheries systems. In particular we analyze fisheries in Italy, which is the third biggest economy and the greatest consumer of seafood in the Eurozone, conducting an in-depth analysis of the Marine Ecological Footprint (MEF that evaluates the marine ecosystem area exploited by human populations to supply seafood and other marine products and services. The positioning of Italian fisheries shows a level of sustainability next to the threshold value. The analysis in the present study highlights the importance of absolute indicators in providing rough estimates about human dependence on ecological systems and recognizes the importance of those indicators, such as the Marine Footprint (expressed in % of Primary Production Required/Primary Production, in ensuring a high level of precision and accuracy in quantifying human activity impact on the environment.

  20. The pectoralis major footprint: An anatomical study

    Directory of Open Access Journals (Sweden)

    Eduardo Antonio de Figueired

    2013-12-01

    Full Text Available Objective: To study the insertion of the pectoralis major tendon to the humerus, through knowledge of its dimensions in the coronal and sagittal planes. Methods: Twenty shoulders from 10 cadavers were dissected and the pectoralis major tendon insertion on the humerus was identified and isolated. The dimensions of its "footprint" (proximal to distal and medial to lateral borders and the distance from the top edge of the pectoralis major tendon to apex of the humeral head structures were measured. Results: The average proximal to distal border length was 80.8 mm (range: 70 -90 and the medial-to-lateral border length was 6.1 mm (5 -7. The average distance (and range from the apex of the pectoralis major tendon to the humeral head was 59.3 mm. Conclusions: We demonstrate that the insertion of the pectoralis major tendon is laminar, and the pectoralis major tendon has an average footprint height and width of 80.8 mm and 6.1 mm, respectively.

  1. European Water Footprint Scenarios for 2050

    Directory of Open Access Journals (Sweden)

    A. Ertug Ercin

    2016-05-01

    Full Text Available This study develops water footprint scenarios for Europe for 2050, at the country level, based on projections regarding population and economic growth, production and trade patterns, consumption patterns (diets and bioenergy use and technological development. The objective is to estimate possible future changes in the green, blue and grey water footprint (WF of production and consumption, to analyze the main drivers of projected changes and to assess Europe’s future dependence on water resources elsewhere in the world. We develop four scenarios, considering globalization versus regional self-sufficiency, and development driven by economic objectives versus development driven by social and environmental objectives. The study shows that the most critical driver of change affecting Europe’s future WF is the consumption pattern. The WFs of both production and consumption in Western Europe increase under scenarios with high meat consumption and decrease with low-meat scenarios. Besides, additional water demands from increasing biofuel needs will put further pressure on European water resources. The European countries with a large ratio of external to total WF of consumption in 2000 decrease their dependencies on foreign water resources in 2050.

  2. Carbon footprint of automotive ignition coil

    Science.gov (United States)

    Chang, Huey-Ling; Chen, Chih-Ming; Sun, Chin-Huang; Lin, Hung-Di

    2015-07-01

    In recent years, environmental issues, such as climate change and global warming due to the excessive development of industry, have attracted increasing attention of citizens worldwide. It is known that CO2 accounts for the largest proportion of greenhouse gases. Therefore, how to reduce CO2 emissions during the life cycle of a product to lessen its impact on environment is an important topic in the industrial society. Furthermore, it is also of great significance to cut down the required energy so as to lower its production costs during the manufacturing process nowadays. This study presents the carbon footprint of an automotive ignition coil and its partial materials are defined to explore their carbon emissions and environmental impact. The model IPCC GWP100a calculates potential global greenhouse effect by converting them into CO2 equivalents. In this way, the overall carbon footprint of an ignition coil can be explored. By using IPCC GWP100a, the results display that the shell has the most carbon emissions. The results can help the industry reduce the carbon emissions of an ignition coil product.

  3. Minor Physical Anomalies, Footprints, and Behavior: Was the Buddha Right?

    Science.gov (United States)

    Draper, Thomas W.; Munoz, Milagros M.

    1982-01-01

    A relationship between an anomaly of the footprint suggested by ancient Abhidhamma meditations and Minor Physical Anomalies Scale was observed in children. The footprint anomalies correlated with the activity levels of children in the same way as the scores on the scale and consistently with prior research using the scale. (Author/RD)

  4. Antagonism in the carbon footprint between beef and dairy ...

    African Journals Online (AJOL)

    GScholtz

    2014-08-22

    Aug 22, 2014 ... In addition, when differences in productivity are accounted for, pasture systems require more resources (land, feed, water, etc.) per unit of milk produced and the carbon footprint is greater than that of intensive systems. This raises the question as to why the carbon footprint of intensive dairy cow production ...

  5. The water footprint of Tunisia from an economic perspective

    NARCIS (Netherlands)

    Chouchane, Hatem; Hoekstra, Arjen Ysbert; Krol, Martinus S.; Mekonnen, Mesfin

    2015-01-01

    This paper quantifies and analyses the water footprint of Tunisia at national and sub-national level, assessing green, blue and grey water footprints for the period 1996–2005. It also assesses economic water and land productivities related to crop production for irrigated and rain-fed agriculture,

  6. Analysis of the carbon footprint of coastal protection systems

    NARCIS (Netherlands)

    Labrujere, A.L.; Verhagen, H.J.

    2012-01-01

    When calculating the Carbon Footprint for a product or service, a direct link is made between the total amount of consumed energy and the produced amount of carbon dioxide during production. For that reason calculating the carbon footprint of various alternatives is a very straightforward method to

  7. Klimaregnskab og Carbon Footprint beregning for Kommunekemi a/s

    DEFF Research Database (Denmark)

    Leinikka Dall, Ole; Wenzel, Henrik

    2009-01-01

    Klimaregnskab for anlægget i Nyborg og carbon footprint for: -forbrænding -uorganisk behandling -halmaskeanlæg Afrapporteret på tryk og indtastet i Simapro......Klimaregnskab for anlægget i Nyborg og carbon footprint for: -forbrænding -uorganisk behandling -halmaskeanlæg Afrapporteret på tryk og indtastet i Simapro...

  8. Intensification to reduce the carbon footprint of smallholder milk production

    NARCIS (Netherlands)

    Udo, Henk; Weiler, Viola; Modupeore, Ogun; Viets, Theo; Oosting, Simon

    2016-01-01

    Will the intensification of cattle-keeping lower the carbon footprint of milk production in resource-poor environments? The authors included the multiple functions of cattle in carbon footprint estimates of milk production in farming systems with different degrees of intensification in Kenya. The

  9. Teaching Quantitative Reasoning for Nonscience Majors through Carbon Footprint Analysis

    Science.gov (United States)

    Boose, David L.

    2014-01-01

    Quantitative reasoning is a key intellectual skill, applicable across disciplines and best taught in the context of authentic, relevant problems. Here, I describe and assess a laboratory exercise that has students calculate their "carbon footprint" and evaluate the impacts of various behavior choices on that footprint. Students gather…

  10. First perissodactyl footprints from Flysch deposits of the Barail Group ...

    Indian Academy of Sciences (India)

    This is the first record of perissodactyl footprints from the Lower Oligocene of India and the first evidence of mammals in the. Barail Group of the age. Remarkable is the occurrence in a marginal marine setting, whereas other known perissodactyl footprints from the Eocene–Oligocene in particular from North America, Europe.

  11. Mormon Impressions: Locating Mormon Footprints on the South ...

    African Journals Online (AJOL)

    Since 1853, when the first three official missionaries arrived at the Cape of Good Hope, Mormons have been treading along the South African religious landscape, leaving in their wake a multitude of paths and trails filled with traceable footprints. These footprints have played a critical role in the formulation of impressions ...

  12. Satellite Communications

    CERN Document Server

    Pelton, Joseph N

    2012-01-01

    The field of satellite communications represents the world's largest space industry. Those who are interested in space need to understand the fundamentals of satellite communications, its technology, operation, business, economic, and regulatory aspects. This book explains all this along with key insights into the field's future growth trends and current strategic challenges. Fundamentals of Satellite Communications is a concise book that gives all of the key facts and figures as well as a strategic view of where this dynamic industry is going. Author Joseph N. Pelton, PhD, former Dean of the International Space University and former Director of Strategic Policy at Intelstat, presents a r

  13. Ecological footprint and food consumption in Minna, Nigeria

    International Nuclear Information System (INIS)

    Razack, N T A A; Ludin, A N M

    2014-01-01

    Cities all over the world are growing and will continue to grow as development is tilted toward development at the expense of the rural area. As a result of this there is need for development of housing that constructed at the urban fringes. There are many tools to measure sustainability of a city and one of them is Ecological Footprint. This paper looked at the Ecological Footprint and food consumption Minna, Nigeria. The paper evaluates the effectiveness of Ecological Footprint in the context of urban development. The survey revealed that food contributed 38.77% of the Ecological Footprint of Minna. This is as a result of the lifestyle of the people. It was concluded that the Ecological Footprint of Minna (1.096gha) is lower than the national bio-capacity (1.24gha), which therefore make city sustainable. Therefore, the people of Minna have to develop a lifestyle that will be sustainable better than the present practice

  14. Greenhouse gas emissions from wastewater treatment plants: measurements and carbon footprint assessment

    DEFF Research Database (Denmark)

    Delre, Antonio

    results. GHG emission factors were also largely responsible for the uncertainty of the net carbon footprint evaluation. Additionally, using default values provided in emission reporting guidelines gave a net carbon footprint up to four times smaller or seven times larger compared to when measured plant...... from WWTPs is a challenging undertaking, since emissions are fugitive, and are occurring across a large area consisting of several smaller sources at different emission heights and physical shapes. In the last two decades, this challenge has been addressed mainly by using on-site point measurements......, namely measuring directly on individual emitting sources identified inside the facility. Usually, a single source is either completely encapsulated or partially covered, in order to measure GHG concentration in a known air volume or through a known air flow, i.e. the flux chamber techniques. Complete...

  15. Satellite myths

    Science.gov (United States)

    Easton, Roger L.; Hall, David

    2008-01-01

    Richard Corfield's article “Sputnik's legacy” (October 2007 pp23-27) states that the satellite on board the US Vanguard rocket, which exploded during launch on 6 December 1957 two months after Sputnik's successful take-off, was “a hastily put together contraption of wires and circuitry designed only to send a radio signal back to Earth”. In fact, the Vanguard satellite was developed over a period of several years and put together carefully using the best techniques and equipment available at the time - such as transistors from Bell Laboratories/Western Electric. The satellite contained not one but two transmitters, in which the crystal-controlled oscillators had been designed to measure both the temperature of the satellite shell and of the internal package.

  16. Satellite Geomagnetism

    DEFF Research Database (Denmark)

    Olsen, Nils; Stolle, Claudia

    2012-01-01

    Observations of Earth’s magnetic field from space began more than 50 years ago. A continuous monitoring of the field using low Earth orbit (LEO) satellites, however, started only in 1999, and three satellites have taken highprecision measurements of the geomagnetic field during the past decade....... The unprecedented time-space coverage of their data opened revolutionary new possibilities for monitoring, understanding, and exploring Earth’s magnetic field. In the near future, the three-satellite constellation Swarm will ensure continuity of such measurement and provide enhanced possibilities to improve our...... ability to characterize and understand the many sources that contribute to Earth’s magnetic field. In this review, we summarize investigations of Earth’s interior and environment that have been possible through the analysis of high-precision magnetic field observations taken by LEO satellites....

  17. A Study of the Oklahoma City Urban Heat Island Effect Using a WRF/Single-Layer Urban Canopy Model, a Joint Urban 2003 Field Campaign, and MODIS Satellite Observations

    Directory of Open Access Journals (Sweden)

    Hengyue Zhang

    2017-09-01

    Full Text Available The urban heat island effect (UHI for inner land regions was investigated using satellite data, ground observations, and simulations with an Single-Layer Urban Canopy Parameterization (SLUCP coupled into the regional Weather Research Forecasting model (WRF, http://wrf-model.org/index.php. Specifically, using the satellite-observed surface skin temperatures (Tskin, the intensity of the UHI was first compared for two inland cities (Xi’an City, China, and Oklahoma City (OKC, which have different city populations and building densities. The larger population density and larger building density in Xi’an lead to a stronger skin-level UHI by 2 °C. However, the ground observed 2 m surface air temperature (Tair observations showed an urban cooling island effect (UCI over the downtown region in OKC during the daytime of 19 July 2003, from a DOE field campaign (Joint Urban 2003. To understand this contrast between satellite-based Tskin and ground-based Tair, a sensitivity study using WRF/SLUCP was analyzed. The model reproduced a UCI in OKC. Furthermore, WRF/Noah/SLUCM simulations were also compared with the Joint Urban 2003 ground observations, including wind speeds, wind directions, and energy fluxes. Although the WRF/SLUCM model failed to simulate these variables accurately, it reproduced the diurnal variations of surface temperatures, wind speeds, wind directions, and energy fluxes reasonably well.

  18. The environmental cost of subsistence: Optimizing diets to minimize footprints

    Energy Technology Data Exchange (ETDEWEB)

    Gephart, Jessica A.; Davis, Kyle F. [University of Virginia, Department of Environmental Sciences, 291 McCormick Road, Charlottesville, VA 22904 (United States); Emery, Kyle A. [University of Virginia, Department of Environmental Sciences, 291 McCormick Road, Charlottesville, VA 22904 (United States); University of California, Santa Barbara. Marine Science Institute, Santa Barbara, CA 93106 (United States); Leach, Allison M. [University of New Hampshire, 107 Nesmith Hall, 131 Main Street, Durham, NH, 03824 (United States); Galloway, James N.; Pace, Michael L. [University of Virginia, Department of Environmental Sciences, 291 McCormick Road, Charlottesville, VA 22904 (United States)

    2016-05-15

    The question of how to minimize monetary cost while meeting basic nutrient requirements (a subsistence diet) was posed by George Stigler in 1945. The problem, known as Stigler's diet problem, was famously solved using the simplex algorithm. Today, we are not only concerned with the monetary cost of food, but also the environmental cost. Efforts to quantify environmental impacts led to the development of footprint (FP) indicators. The environmental footprints of food production span multiple dimensions, including greenhouse gas emissions (carbon footprint), nitrogen release (nitrogen footprint), water use (blue and green water footprint) and land use (land footprint), and a diet minimizing one of these impacts could result in higher impacts in another dimension. In this study based on nutritional and population data for the United States, we identify diets that minimize each of these four footprints subject to nutrient constraints. We then calculate tradeoffs by taking the composition of each footprint's minimum diet and calculating the other three footprints. We find that diets for the minimized footprints tend to be similar for the four footprints, suggesting there are generally synergies, rather than tradeoffs, among low footprint diets. Plant-based food and seafood (fish and other aquatic foods) commonly appear in minimized diets and tend to most efficiently supply macronutrients and micronutrients, respectively. Livestock products rarely appear in minimized diets, suggesting these foods tend to be less efficient from an environmental perspective, even when nutrient content is considered. The results' emphasis on seafood is complicated by the environmental impacts of aquaculture versus capture fisheries, increasing in aquaculture, and shifting compositions of aquaculture feeds. While this analysis does not make specific diet recommendations, our approach demonstrates potential environmental synergies of plant- and seafood-based diets. As a result

  19. The environmental cost of subsistence: Optimizing diets to minimize footprints

    International Nuclear Information System (INIS)

    Gephart, Jessica A.; Davis, Kyle F.; Emery, Kyle A.; Leach, Allison M.; Galloway, James N.; Pace, Michael L.

    2016-01-01

    The question of how to minimize monetary cost while meeting basic nutrient requirements (a subsistence diet) was posed by George Stigler in 1945. The problem, known as Stigler's diet problem, was famously solved using the simplex algorithm. Today, we are not only concerned with the monetary cost of food, but also the environmental cost. Efforts to quantify environmental impacts led to the development of footprint (FP) indicators. The environmental footprints of food production span multiple dimensions, including greenhouse gas emissions (carbon footprint), nitrogen release (nitrogen footprint), water use (blue and green water footprint) and land use (land footprint), and a diet minimizing one of these impacts could result in higher impacts in another dimension. In this study based on nutritional and population data for the United States, we identify diets that minimize each of these four footprints subject to nutrient constraints. We then calculate tradeoffs by taking the composition of each footprint's minimum diet and calculating the other three footprints. We find that diets for the minimized footprints tend to be similar for the four footprints, suggesting there are generally synergies, rather than tradeoffs, among low footprint diets. Plant-based food and seafood (fish and other aquatic foods) commonly appear in minimized diets and tend to most efficiently supply macronutrients and micronutrients, respectively. Livestock products rarely appear in minimized diets, suggesting these foods tend to be less efficient from an environmental perspective, even when nutrient content is considered. The results' emphasis on seafood is complicated by the environmental impacts of aquaculture versus capture fisheries, increasing in aquaculture, and shifting compositions of aquaculture feeds. While this analysis does not make specific diet recommendations, our approach demonstrates potential environmental synergies of plant- and seafood-based diets. As a result

  20. Carbon footprint from dairy farming system

    DEFF Research Database (Denmark)

    Della Riva, A.; Kristensen, Troels; De Marchi1, M.

    2014-01-01

    . The results show 0.80 kg CO2eq/kg ECM in JE herd, while 0.96 kg CO2eq/kg ECM in HF herd. The main differences were due to the level of dry matter intake, milk yield and fertility traits. Indeed, JE herd showed a lower milk yield than HF herd, a lower DMI and better fertility, determining less production......Aim of the present study was to estimate the carbon footprint (CF) of milk production at farm gate considering two dairy cattle breeds, Holstein Friesian (HF) and Jersey (JE). Using Italian inventory data the emissions of CO2eq per kg ECM for dairy herds of HF and JE breed were estimated...... and consumption of feed and less replacement animals in the herd....

  1. Uk’e koley (no footprint) Project

    Energy Technology Data Exchange (ETDEWEB)

    Winnestaffer, Jessica E.D. [Chickaloon Native Village

    2014-03-30

    Chickaloon Native Village is a federally-recognized Alaska Native Tribe that has long been devoted to being a good steward to the environment, understanding that it is our responsibility to take care of the land that has been loaned to us for the short time we are here. The goal of this project was to conduct a feasibility study to assess the energy uses, loads, and efficiencies for all of our current Tribally owned and operated buildings and rental housing units, to determine if it makes economic and environmental sense to install renewable energy systems on each building to lower our carbon footprints and to decrease our dependence on fossil fuels. The goal was met and we have developed a plan for installing renewable energy systems on several Tribal buildings where the benefits will be most notable.

  2. Managing Carbon Footprints under the Trade Credit

    Directory of Open Access Journals (Sweden)

    Xiaohong Chen

    2017-07-01

    Full Text Available We investigate how the retailer adjusts optimal ordering policy in the presence of cap-and-trade system and trade credit, and the corresponding changes of the retailer’s total costs and carbon footprint. Trade credit is one of the most used short-term financing tools. Our study shows that carbon emissions trading will shorten the ordering cycle for products that emit more carbon dioxide during the storage stage, and therefore reduce the buying behavior stimulation effect of trade credit on these products. Under the cap-and-trade system, the retailer’s total cost may increase or decrease, depending on the combination of carbon cap allocated to the retailer and the carbon price. Moreover, trade credit and the corresponding cost of capital affect the retailer’s carbon emission reduction strategy by changing the retailers’ consolidated cost during the ordering and inventory holding stages.

  3. The water footprint of land grabbing

    Science.gov (United States)

    Rulli, Maria Cristina; D'Odorico, Paolo

    2013-12-01

    increasing global demand for food, fibers, and biofuels has made investments in agriculture a priority for some governments and corporations eager to expand their agricultural production while securing good profits. Here we calculate the water appropriation associated with land deals at different negotiation and implementation stages. Using estimates of actual and potential evapotranspiration for the crops planted in the acquired land, we calculate the green and blue water appropriated by land investors under a variety of irrigation scenarios. We also determine the grey water footprint as the amount of water required to dilute to allowable standards the pollution resulting from fertilizer applications. We found that about 380 × 109 m3 yr-1 of rainwater is appropriated with the 43 million ha of reported contract area acquired by agri-investors (>240 × 109 m3 yr-1 in the 29 million ha of foreign acquisitions only). This water would be sufficient to feed ≈ 300-390 million people.

  4. Corporate Carbon Footprint Arla Foods amba

    DEFF Research Database (Denmark)

    Birkved, Morten; Poulsen, Jan; Shonfield, Peter

    2009-01-01

    to affect consumers’ purchasing decisions Recognising the potentially important impact of climate change on its business, as well as its wider social responsibility to effectively manage its GHG emissions, Arla Foods has commissioned PE North West Europe to carry out a corporate carbon footprint analysis......Global warming and climate change are the foremost environmental challenges facing the world today. They will only be tackled effectively if actors at all levels in society including governments, businesses, communities and individuals take responsibility for, and attempt to minimise......, their greenhouse gas emissions. Arla Foods is a market-leading producer of dairy products and climate change may have severe effects on its business at all levels, for example: • Availability of raw materials – farm productivity may be affected by changing, and less predictable, climatic conditions and through...

  5. Interannual variability of crop water footprint

    Science.gov (United States)

    Tuninetti, M.; Tamea, S.; Laio, F.; Ridolfi, L.

    2016-12-01

    The crop water footprint, CWF, is a useful tool to investigate the water-food nexus, since it measures the water requirement for crop production. Heterogeneous spatial patterns of climatic conditions and agricultural practices have inspired a flourishing literature on the geographic assessment of CWF, mostly referred to a fixed (time-averaged) period. However, given that both climatic conditions and crop yield may vary substantially over time, also the CWF temporal dynamics need to be addressed. As other studies have done, we base the CWF variability on yield, while keeping the crop evapotranspiration constant over time. As a new contribution, we prove the feasibility of this approach by comparing these CWF estimates with the results obtained with a full model considering variations of crop evapotranspiration: overall, the estimates compare well showing high coefficients of determination that read 0.98 for wheat, 0.97 for rice, 0.97 for maize, and 0.91 for soybean. From this comparison, we derive also the precision of the method, which is around ±10% that is higher than the precision of the model used to evaluate the crop evapotranspiration (i.e., ±30%). Over the period between 1961 and 2013, the CWF of the most cultivated grains has sharply decreased on a global basis (i.e., -68% for wheat, -62% for rice, -66% for maize, and -52% for soybean), mainly driven by enhanced yield values. The higher water use efficiency in crop production implies a reduced virtual displacement of embedded water per ton of traded crop and as a result, the temporal variability of virtual water trade is different if considering constant or time-varying CWF. The proposed yield-based approach to estimate the CWF variability implies low computational costs and requires limited input data, thus, it represents a promising tool for time-dependent water footprint assessments.

  6. Footprint mismatch in total cervical disc arthroplasty.

    Science.gov (United States)

    Thaler, Martin; Hartmann, Sebastian; Gstöttner, Michaela; Lechner, Ricarda; Gabl, Michael; Bach, Christian

    2013-04-01

    Cervical disc arthroplasty has become a commonplace surgery for the treatment of cervical radiculopathy and myelopathy. Most manufacturers derive their implant dimensions from early published cadaver studies. Ideal footprint match of the prosthesis is essential for good surgical outcome. We measured the dimensions of cervical vertebrae from computed tomography (CT) scans and to assess the accuracy of match achieved with the most common cervical disc prostheses [Bryan (Medtronic), Prestige LP (Medtronic), Discover (DePuy) Prodisc-C (Synthes)]. A total of 192 endplates in 24 patients (56.3 years) were assessed. The anterior-posterior and mediolateral diameters of the superior and inferior endplates were measured with a digital measuring system. Overall, 53.5 % of the largest device footprints were smaller in the anterior-posterior diameter and 51.1 % in the mediolateral diameter were smaller than cervical endplate diameters. For levels C5/C6 and C6/C7 an inappropriate size match was noted in 61.9 % as calculated from the anteroposterior diameter. Mismatch at the center mediolateral diameter was noted in 56.8 %. Of the endplates in the current study up to 58.1 % of C5/C6 and C6/C7, and up to 45.3 % of C3/C4 and C4/C5 were larger than the most frequently implanted cervical disc devices. Surgeons and manufacturers should be aware of the size mismatch in currently available cervical disc prostheses, which may endanger the safety and efficacy of the procedure. Undersizing the prosthetic device may lead to subsidence, loosening, heterotopic ossification and biomechanical failure caused by an incorrect center of rotation and load distribution, affecting the facet joints.

  7. Techniques for verifying human footprints: reappraisal of pre-Clovis footprints in Central Mexico

    Science.gov (United States)

    Morse, Sarita Amy; Bennett, Matthew R.; Gonzalez, Silvia; Huddart, David

    2010-09-01

    Verification of human footprints within the geological record provides critical evidence of presence as well as information on the biomechanics of the individuals who made those prints. Consequently, the correct identification of human footprints is important, but is something for which critical and objective criteria do not exist. The current paper attempts to address this issue by presenting a new statistically based approach to the verification of human footprints. The importance of this is illustrated by the recent controversy surrounding a series of marks identified as human prints in the Valsequillo Basin in Central Mexico dated originally to 40 000 years ago. The dating of these marks remains highly controversial with some teams placing their age at 1.3 million years old. Irrespective of this debate the crucial question that must be addressed is whether or not they represent evidence of human presence. Using an objective statistically based methodology developed here, these controversial marks are re-examined and found to be of questionable origin, as they are inconsistent with a suite of other, known human and hominin prints. Consequently, we argue that they should be removed as evidence in the ongoing controversy surrounding the colonization of the Americas.

  8. Regional Per Capita Solar Electric Footprint for the United States

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, P.; Margolis, R.

    2007-12-01

    In this report, we quantify the state-by-state per-capita 'solar electric footprint' for the United States. We use state-level data on population, electricity consumption, economic activity and solar insolation, along with solar photovoltaic (PV) array packing density data to develop a range of estimates of the solar electric footprint. We find that the solar electric footprint, defined as the land area required to supply all end-use electricity from solar photovoltaics, is about 181 m2 per person in the United States. Two key factors that influence the magnitude of the state-level solar electric footprint include how industrial energy is allocated (based on location of use vs. where goods are consumed) and the assumed distribution of PV configurations (flat rooftop vs. fixed tilt vs. tracking). The solar electric footprint is about 0.6% of the total land area of the United States with state-level estimates ranging from less than 0.1% for Wyoming to about 9% for New Jersey. We also compare the solar electric footprint to a number of other land uses. For example, we find that the solar electric footprint is equal to less than 2% of the land dedicated to cropland and grazing in the United States.

  9. The nitrogen footprint tool network: a multi-institution program ...

    Science.gov (United States)

    Anthropogenic sources of reactive nitrogen have local and global impacts on air and water quality and detrimental effects on human and ecosystem health. This paper uses the nitrogen footprint tool (NFT) to determine the amount of nitrogen (N) released as a result of institutional consumption. The sectors accounted for include food (consumption and the upstream production), energy, transportation, fertilizer, research animals, and agricultural research. The NFT is then used for scenario analysis to manage and track reductions to institution N footprints, which are driven by the consumption behaviors of both the institution itself and its constituent individuals. In this paper, the first seven institution N footprint results are presented. The institution NFT network aims to develop footprints for many institutions to encourage widespread upper-level management strategies that will create significant reductions in reactive N released to the environment. Energy use and food purchases are the two largest contributors to institution N footprints. Ongoing efforts by institutions to reduce greenhouse gas emissions also help to reduce the N footprint, but the impact of food production on N pollution has not been directly addressed by the higher-ed sustainability community. The NFT Network found that institutions could reduce their N footprints by optimizing food purchasing to reduce consumption of animal products and minimize food waste, as well as reducing dependence o

  10. Ecological Footprint in relation to Climate Change Strategy in Cities

    Science.gov (United States)

    Belčáková, Ingrid; Diviaková, Andrea; Belaňová, Eliška

    2017-10-01

    Ecological footprint determines how much natural resources are consumed by an individual, city, region, state or all inhabitants of our planet in order to ensure their requirements and needs. It includes all activities, from food consumption, housing, transport to waste produced and allows us to compare particular activities and their impacts on the environment and natural resources. Ecological footprint is important issue for making sustainable development concept more popular using simplifications, which provide the public with basic information on situation on our planet. Today we know calculations of global (worldwide), national and local ecological footprints. During our research in cities, we were concentrated on calculation of city’s ecological footprint. The article tries to outline theoretical and assumptions and practical results of climate change consequences in cities of Bratislava and Nitra (Slovakia), to describe potential of mitigating adverse impacts of climate change and to provide information for general and professional public on theoretical assumptions in calculating ecological footprint. The intention is to present innovation of ecological footprint calculation, taking into consideration ecological stability of a city (with a specific focus on micro-climate functions of green areas). Present possibilities to reduce ecological footprint are presented.

  11. Ancient human footprints in Ciur-Izbuc Cave, Romania.

    Science.gov (United States)

    Webb, David; Robu, Marius; Moldovan, Oana; Constantin, Silviu; Tomus, Bogdan; Neag, Ionel

    2014-09-01

    In 1965, Ciur-Izbuc Cave in the Carpathian Mountains of Romania was discovered to contain about 400 ancient human footprints. At that time, researchers interpreted the footprints to be those of a man, woman and child who entered the cave by an opening which is now blocked but which was usable in antiquity. The age of the prints (≈10-15 ka BP) was based partly on their association with cave bear (Ursus spelaeus) footprints and bones, and the belief that cave bears became extinct near the end of the last ice age. Since their discovery, the human and bear evidence and the cave itself have attracted spelunkers and other tourists, with the result that the ancient footprints are in danger of destruction by modern humans. In an effort to conserve the footprints and information about them and to reanalyze them with modern techiques, Ciur-Izbuc Cave was restudied in summer of 2012. Modern results are based on fewer than 25% of the originally described human footprints, the rest having been destroyed. It is impossible to confirm some of the original conclusions. The footprints do not cluster about three different sizes, and the number of individuals is estimated to be six or seven. Two cases of bears apparently overprinting humans help establish antiquity, and C-14 dates suggest a much greater age than originally thought. Unfortunately, insufficient footprints remain to measure movement variables such as stride length. However, detailed three-dimensional mapping of the footprints does allow a more precise description of human movements within the cave. © 2014 Wiley Periodicals, Inc.

  12. Potentials and limitations of footprints for gauging environmental sustainability

    DEFF Research Database (Denmark)

    Laurent, Alexis; Owsianiak, Mikolaj

    2017-01-01

    ) provide an overview of existing footprints; (2) define their roles; (3) position them within the broad spectrum of known environmental problems and control variables of the planetary boundaries; and (4) argue for the need of consistent thresholds to benchmark footprint scores against absolute......To address the sustainability challenge, a large variety of footprints, aiming at capturing specific impacts of human activities on natural environment, have emerged. But, how do they fit into our addressing of environmental sustainability? Here, we build on a critical literature review to (1...... sustainability measures defined using science-based sustainability targets. Potentials, limitations and research needs are highlighted along these four points....

  13. Carbon footprint reductions via grid energy storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Trevor S. [Naval Facilities Engineering Service Center, 1100 23rd Avenue, Port Huenem, CA 93043 (United States); Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas (United States); Weeks, Kelly [Department of Maritime Administration, Texas A and M University at Galveston, Galveston, TX 77553 (United States); Tucker, Coleman [Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas 77002 (United States)

    2011-07-01

    This effort presents a framework for reducing carbon emissions through the use of large-scale grid-energy-storage (GES) systems. The specific questions under investigation herein are as follows: Is it economically sound to invest in a GES system and is the system at least carbon footprint neutral? This research will show the answer to both questions is in the affirmative. Scilicet, when utilized judiciously, grid energy storage systems can be both net present value positive as well as be total carbon footprint negative. The significant contribution herein is a necessary and sufficient condition for achieving carbon footprint reductions via grid energy storage systems.

  14. Insights on the Fort Davis — Mc Donald site stability: a GPS footprint

    Science.gov (United States)

    Vigny, Christophe

    1996-05-01

    In june 1990, NASA's Crustal Dynamics Project (CDP) has established a geodetic footprint for the Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI) systems located near Fort Davis, Texas using GPS measurements. The purpose of such a footprint is to assess both the tectonic and physical stability of the main observing monuments. Included in the survey were four new monuments forming a 20 to 30 km quadrilateral, as well as four existing monuments near the McDonald Laser Ranging System (MLRS), the Harvard Radio Astronomy (HRA) 85' antenna, and the new 85' antenna of the Very Long Baseline Array (VLBA). This network was partly reoccupied by the University of Texas Austin in may 1992. Three additional sites not observed in 1990 were occupied, two of them being old monuments in the observatory area (Harvard-RM4 and VLBA-SLR), and a new monument 80 km away across the closest active fault near Valentine, Texas. Thanks to existing ties between nearby monuments in the observatory area, the comparison between the two epochs was made possible. Significant motion of more than 1 cm of any of the implied sites over a two year period can be ruled out. Despite this quite reassuring results, smaller displacements cannot be detected mainly because of the poor quality of the 1990 data. Therefore it is strongly advised that a third occupation of the footprint sites takes place in the close future. Such a survey, occuring five years after the first one and three years after the second one, should definitely answer the questions on the Fort Davis area stability at the millimeter per year level.

  15. Disagreement over carbon footprints: A comparison of electric and LPG forklifts

    International Nuclear Information System (INIS)

    Johnson, Eric

    2008-01-01

    Carbon footprint is an increasingly popular concept: for labelling, marketing, finance and regulation. In individual cases, carbon footprints can also be contentious, for example in the case of LPG and electric forklifts. Therefore, the fuel carbon footprints of the two were investigated to see if a fair, robust comparison could be made. This investigation yielded two conclusions: (1) definitions will continue to complicate footprint comparisons and (2) fuel carbon footprints of electric and (liquefied petroleum gas) LPG forklifts are, in principle, about equal, while in actual practice, LPG's footprint is smaller than that of electricity. The paper concludes that carbon footprint definitions should be sensible and transparent, but not prescribed. (author)

  16. Small Footprint Solar/Wind-powered CASTNET System Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — In this Research Effort “Small Footprint Solar/Wind-Powered CASTNET System” there are two data sets. One data set contains atmospheric concentration measurements, at...

  17. Institutional Nitrogen Footprint: A Case Study at Oregon State University

    Science.gov (United States)

    Many institutions of higher education are measuring and consciously managing their impact on the environment, using metrics of energy use, recycling, alternative transportation or local foods. While the carbon footprint is a more widely known metric of sustainability, the nitrog...

  18. Cooperative water network system to reduce carbon footprint.

    Science.gov (United States)

    Lim, Seong-Rin; Park, Jong Moon

    2008-08-15

    Much effort has been made in reducing the carbon footprint to mitigate climate change. However, water network synthesis has been focused on reducing the consumption and cost of freshwater within each industrial plant. The objective of this study is to illustrate the necessity of the cooperation of industrial plants to reduce the total carbon footprint of their water supply systems. A mathematical optimization model to minimize global warming potentials is developed to synthesize (1) a cooperative water network system (WNS) integrated over two plants and (2) an individual WNS consisting of two WNSs separated for each plant. The cooperative WNS is compared to the individual WNS. The cooperation reduces their carbon footprint and is economically feasible and profitable. A strategy for implementing the cooperation is suggested for the fair distribution of costs and benefits. As a consequence, industrial plants should cooperate with their neighbor plants to further reduce the carbon footprint.

  19. Satellite Radio

    Indian Academy of Sciences (India)

    communications as well as for point-to-multipoint broadcasting. GENERAL I ARTICLE. Radio is perceived to be an individual's possession because of its portability. It can be ... (See Box 1.) Gsa satellites are used for point-to-point communications as ... digital modulations one uses perceptual coding using auditory masking.

  20. Partitioning carbon fluxes from a Midwestern corn and soybean rotation system using footprint analysis

    Science.gov (United States)

    Dold, C.; Hatfield, J.; Prueger, J. H.; Wacha, K.

    2017-12-01

    Midwestern US agriculture is dominated by corn and soybean production. Corn has typically higher Net Ecosystem Exchange (NEE) than soybean due to increased carboxylation efficiency and different crop management. The conjoined NEE may be measured with eddy covariance (EC) stations covering both crops, however, it is often unclear what the contribution of each crop is, as the CO2 source area remains unknown. The aim of this study was to quantify the contribution of CO2 fluxes from each crop for a conventional corn-soybean rotation system from 2007 - 2015. Therefore, the combined CO2 flux of three adjacent fields with annual corn-soybean rotation was measured with a 9.1 m EC tower (Flux 30). In the center of two of these fields, additional EC towers (Flux 10 and Flux 11) were positioned above the corn and soybean canopy to validate Flux 30 NEE. For each EC system the annual 90% NEE footprint area was calculated, footprints were partitioned among fields, and NEE separated accordingly. The average annual 90% footprint area of Flux 30, and Flux 10/11 corn and soybean was estimated to 206, 11 and 7 ha, respectively. The annual average (±SE) NEE of Flux 30 was -693 ± 47 g CO2 m-2 yr-1, of which 83% out of 90% originated from the three adjacent fields. Corn and soybean NEE measured at Flux 10 and 11 was -1124 ± 95 and 173 ± 73 g CO2 m-2 yr-1, respectively, and 89% and 90% originated from these fields. That demonstrates, that Flux 30 represents the combined NEE of a corn-soybean rotation, and Flux 10 and 11 measured NEE from a single crop. However, the share of Flux 30 NEE originating from corn and soybean grown on the Flux 10/11 fields was -192 ± 16 and -205 ± 18 g CO2 m-2 yr-1, indicating a substantial difference to single crop NEE. While it was possible to measure the NEE of a corn-soybean rotation with a tall EC tower, footprint partitioning could not retrieve NEE for each crop, probably due to differences in measurement height and footprint source area.

  1. Spatially Explicit Analysis of Water Footprints in the UK

    Directory of Open Access Journals (Sweden)

    John Barrett

    2010-12-01

    Full Text Available The Water Footprint, as an indicator of water consumption has become increasingly popular for analyzing environmental issues associated with the use of water resources in the global supply chain of consumer goods. This is particularly relevant for countries like the UK, which increasingly rely on products produced elsewhere in the world and thus impose pressures on foreign water resources. Existing studies calculating water footprints are mostly based on process analysis, and results are mainly available at the national level. The current paper assesses the domestic and foreign water requirements for UK final consumption by applying an environmentally extended multi-regional input-output model in combination with geo-demographic consumer segmentation data. This approach allows us to calculate water footprints (both direct and indirect for different products as well as different geographies within the UK. We distinguished between production and consumption footprints where the former is the total water consumed from the UK domestic water resources by the production activities in the UK and the latter is the total water consumed from both domestic and global water resources to satisfy the UK domestic final consumption. The results show that the production water footprint is 439 m3/cap/year, 85% of which is for the final consumption in the UK itself. The average consumption water footprint of the UK is more than three times bigger than the UK production water footprint in 2006. About half of the UK consumption water footprints were associated with imports from Non-OECD countries (many of which are water-scarce, while around 19% were from EU-OECD countries, and only 3% from Non-EU-OECD countries. We find that the water footprint differs considerably across sub-national geographies in the UK, and the differences are as big as 273 m3/cap/year for the internal water footprint and 802 m3/cap/year for the external water footprint. Our results suggest

  2. A Seasonal Trend of Single Scattering Albedo in Southern African Biomass-burning Particles: Implications for Satellite Products and Estimates of Emissions for the World's Largest Biomass-burning Source

    Science.gov (United States)

    Eck, T. F.; Holben, B. N.; Reid, J. S.; Mukelabai, M. M.; Piketh, S. J.; Torres, O.; Jethva, H. T.; Hyer, E. J.; Ward, D. E.; Dubovik, O.; hide

    2013-01-01

    As a representative site of the southern African biomass-burning region, sun-sky data from the 15 year Aerosol Robotic Network (AERONET) deployment at Mongu, Zambia, was analyzed. For the biomass-burning season months (July-November), we investigate seasonal trends in aerosol single scattering albedo (SSA), aerosol size distributions, and refractive indices from almucantar sky scan retrievals. The monthly mean single scattering albedo at 440 nm in Mongu was found to increase significantly from approx.. 0.84 in July to approx. 0.93 in November (from 0.78 to 0.90 at 675 nm in these same months). There was no significant change in particle size, in either the dominant accumulation or secondary coarse modes during these months, nor any significant trend in the Angstrom exponent (440-870 nm; r(exp 2) = 0.02). A significant downward seasonal trend in imaginary refractive index (r(exp 2) = 0.43) suggests a trend of decreasing black carbon content in the aerosol composition as the burning season progresses. Similarly, burning season SSA retrievals for the Etosha Pan, Namibia AERONET site also show very similar increasing single scattering albedo values and decreasing imaginary refractive index as the season progresses. Furthermore, retrievals of SSA at 388 nm from the Ozone Monitoring Instrument satellite sensor show similar seasonal trends as observed by AERONET and suggest that this seasonal shift is widespread throughout much of southern Africa. A seasonal shift in the satellite retrieval bias of aerosol optical depth from the Moderate Resolution Imaging Spectroradiometer collection 5 dark target algorithm is consistent with this seasonal SSA trend since the algorithm assumes a constant value of SSA. Multi-angle Imaging Spectroradiometer, however, appears less sensitive to the absorption-induced bias.

  3. A seasonal trend of single scattering albedo in southern African biomass-burning particles: Implications for satellite products and estimates of emissions for the world's largest biomass-burning source

    Science.gov (United States)

    Eck, T. F.; Holben, B. N.; Reid, J. S.; Mukelabai, M. M.; Piketh, S. J.; Torres, O.; Jethva, H. T.; Hyer, E. J.; Ward, D. E.; Dubovik, O.; Sinyuk, A.; Schafer, J. S.; Giles, D. M.; Sorokin, M.; Smirnov, A.; Slutsker, I.

    2013-06-01

    As a representative site of the southern African biomass-burning region, sun-sky data from the 15 year Aerosol Robotic Network (AERONET) deployment at Mongu, Zambia, was analyzed. For the biomass-burning season months (July-November), we investigate seasonal trends in aerosol single scattering albedo (SSA), aerosol size distributions, and refractive indices from almucantar sky scan retrievals. The monthly mean single scattering albedo at 440 nm in Mongu was found to increase significantly from 0.84 in July to 0.93 in November (from 0.78 to 0.90 at 675 nm in these same months). There was no significant change in particle size, in either the dominant accumulation or secondary coarse modes during these months, nor any significant trend in the Ångström exponent (440-870 nm; r2 = 0.02). A significant downward seasonal trend in imaginary refractive index (r2 = 0.43) suggests a trend of decreasing black carbon content in the aerosol composition as the burning season progresses. Similarly, burning season SSA retrievals for the Etosha Pan, Namibia AERONET site also show very similar increasing single scattering albedo values and decreasing imaginary refractive index as the season progresses. Furthermore, retrievals of SSA at 388 nm from the Ozone Monitoring Instrument satellite sensor show similar seasonal trends as observed by AERONET and suggest that this seasonal shift is widespread throughout much of southern Africa. A seasonal shift in the satellite retrieval bias of aerosol optical depth from the Moderate Resolution Imaging Spectroradiometer collection 5 dark target algorithm is consistent with this seasonal SSA trend since the algorithm assumes a constant value of SSA. Multi-angle Imaging Spectroradiometer, however, appears less sensitive to the absorption-induced bias.

  4. Water Footprint and Virtual Water Trade of Brazil

    OpenAIRE

    da Silva, Vicente de Paulo R.; de Oliveira, Sonaly D.; Hoekstra, Arjen Ysbert; Neto, Jose Dantas; Campos, João Hugo B.C.; Braga, Celia C.; Araújo, Lincoln Eloi; Oliveira Aleixo, Danilo; de Brito, Jose Ivaldo B.; de Souza, Marcio Dionisio; de Holanda, Romildo M.

    2016-01-01

    Freshwater scarcity has increased at an alarming rate worldwide; improved water management plays a vital role in increasing food production and security. This study aims to determine the water footprint of Brazil’s national food consumption, the virtual water flows associated with international trade in the main agricultural commodities, as well as water scarcity, water self-sufficiency and water dependency per Brazilian region. While previous country studies on water footprints and virtual w...

  5. Studying User Footprints in Different Online Social Networks

    OpenAIRE

    Malhotra, Anshu; Totti, Luam; Meira Jr., Wagner; Kumaraguru, Ponnurangam; Almeida, Virgilio

    2013-01-01

    With the growing popularity and usage of online social media services, people now have accounts (some times several) on multiple and diverse services like Facebook, LinkedIn, Twitter and YouTube. Publicly available information can be used to create a digital footprint of any user using these social media services. Generating such digital footprints can be very useful for personalization, profile management, detecting malicious behavior of users. A very important application of analyzing users...

  6. Assessment of global grey water footprint of major food crops

    Science.gov (United States)

    Yang, Hong; Liu, Wenfeng; Antonelli, Marta

    2016-04-01

    Agricultural production is one of the major sources of water pollution in the world. This is closely related to the excess application of fertilizers. Leaching of N and P to water bodies has caused serious degradation of water quality in many places. With the persistent increase in the demand for agricultural products, agricultural intensification evident during the past decades will continue in the future. This will lead to further increase in fertilizer application and consequently water pollution. Grey water footprint is a measure of the intensity of water pollution caused by water use for human activities. It is defined as the volume of water that is required to assimilate a load of pollutants to a freshwater body, based on natural background concentrations and water quality standards. This study conducts a global assessment of grey water footprint for major cereal crops, wheat, maize and rice. A crop model, Python-based EPIC (PEPIT), is applied to quantify the leaching of N and P from the fertilizer application in the three crops on a global scale with 0.5 degree spatial resolution. The hotspots of leaching are identified. The results suggest that, based on the definition and method of grey water footprint proposed by the World Water Footprint Network, the grey water footprint in many parts of the world has exceeded their total water resources availability. This indicates the seriousness of water pollution caused by agricultural production. However, the situation may also call for the development of a realistic measurement of grey water footprint which is more pertinent to water resources management. This paper proposes some alternatives in measuring grey water footprint and also discusses incorporation of grey water footprint assessment into water policy formulation and river basins plan development.

  7. The blue water footprint of electricity from hydropower

    Directory of Open Access Journals (Sweden)

    M. M. Mekonnen

    2012-01-01

    Full Text Available Hydropower accounts for about 16% of the world's electricity supply. It has been debated whether hydroelectric generation is merely an in-stream water user or whether it also consumes water. In this paper we provide scientific support for the argument that hydroelectric generation is in most cases a significant water consumer. The study assesses the blue water footprint of hydroelectricity – the water evaporated from manmade reservoirs to produce electric energy – for 35 selected sites. The aggregated blue water footprint of the selected hydropower plants is 90 Gm3 yr−1, which is equivalent to 10% of the blue water footprint of global crop production in the year 2000. The total blue water footprint of hydroelectric generation in the world must be considerably larger if one considers the fact that this study covers only 8% of the global installed hydroelectric capacity. Hydroelectric generation is thus a significant water consumer. The average water footprint of the selected hydropower plants is 68 m3 GJ−1. Great differences in water footprint among hydropower plants exist, due to differences in climate in the places where the plants are situated, but more importantly as a result of large differences in the area flooded per unit of installed hydroelectric capacity. We recommend that water footprint assessment is added as a component in evaluations of newly proposed hydropower plants as well as in the evaluation of existing hydroelectric dams, so that the consequences of the water footprint of hydroelectric generation on downstream environmental flows and other water users can be evaluated.

  8. Essential amino acids: master regulators of nutrition and environmental footprint?

    OpenAIRE

    Tessari, Paolo; Lante, Anna; Mosca, Giuliano

    2016-01-01

    The environmental footprint of animal food production is considered several-fold greater than that of crops cultivation. Therefore, the choice between animal and vegetarian diets may have a relevant environmental impact. In such comparisons however, an often neglected issue is the nutritional value of foods. Previous estimates of nutrients? environmental footprint had predominantly been based on either food raw weight or caloric content, not in respect to human requirements. Essential amino a...

  9. Mobility management in satellite networks

    Science.gov (United States)

    Johanson, Gary A.

    1995-01-01

    This paper addresses the methods used or proposed for use in multi-beam and/or multi-satellite networks designed to provide Mobile Satellite Services (MSS). Specific topics include beam crossover in the North American Mobile Satellite (MSAT) system as well as registration and live call hand-off for a multi-regional geosynchronous (GEO) satellite based system and a global coverage Low Earth Orbiting (LEO) system. In the MSAT system, the individual satellite beams cover very large geographic areas so the need for live call hand-off was not anticipated. This paper discusses the methods used to keep track of the beam location of the users so that incoming call announcements or other messages may be directed to them. Proposed new GEO systems with large numbers of beams will provide much smaller geographic coverage in individual beams and thus the need arises to keep track of the user's location as well as to provide live call hand-off as the user traverses from beam to beam. This situation also occurs in proposed LEO systems where the problems are worsened by the need for satellite to satellite hand-off as well as beam to beam hand-off within a single satellite. The paper discusses methods to accomplish these handoffs and proposes system architectures to address the various hand-off scenarios.

  10. The Skeletal Muscle Satellite Cell

    Science.gov (United States)

    2011-01-01

    The skeletal muscle satellite cell was first described and named based on its anatomic location between the myofiber plasma and basement membranes. In 1961, two independent studies by Alexander Mauro and Bernard Katz provided the first electron microscopic descriptions of satellite cells in frog and rat muscles. These cells were soon detected in other vertebrates and acquired candidacy as the source of myogenic cells needed for myofiber growth and repair throughout life. Cultures of isolated myofibers and, subsequently, transplantation of single myofibers demonstrated that satellite cells were myogenic progenitors. More recently, satellite cells were redefined as myogenic stem cells given their ability to self-renew in addition to producing differentiated progeny. Identification of distinctively expressed molecular markers, in particular Pax7, has facilitated detection of satellite cells using light microscopy. Notwithstanding the remarkable progress made since the discovery of satellite cells, researchers have looked for alternative cells with myogenic capacity that can potentially be used for whole body cell-based therapy of skeletal muscle. Yet, new studies show that inducible ablation of satellite cells in adult muscle impairs myofiber regeneration. Thus, on the 50th anniversary since its discovery, the satellite cell’s indispensable role in muscle repair has been reaffirmed. PMID:22147605

  11. Regional water footprint evaluation in China: a case of Liaoning.

    Science.gov (United States)

    Dong, Huijuan; Geng, Yong; Sarkis, Joseph; Fujita, Tsuyoshi; Okadera, Tomohiro; Xue, Bing

    2013-01-01

    Water-related problems are currently second only to energy issues as threats to human society. North China is a region that is facing severe water scarcity problems. In order to provide appropriate water mitigation policies a regional study is completed. Under this circumstance, Liaoning Province, a typical heavy industrial province in north China is chosen as a case study region. The input-output analysis method is employed in order to evaluate the water footprint both from production and consumption perspectives. The results show that the total water footprint of Liaoning in 2007 was 7.30 billionm(3), a 84.6% of internal water footprint and a 15.4% external water footprint. The water trade balance of Liaoning was 2.68 billionm(3), indicating that Liaoning was a net water export region, although water shortages are becoming a more serious concern. The "Agriculture" and "Food and beverage production" sectors are found to have the highest water footprint, water intensity, water exports, and water trade balance. Based upon Liaoning realities policy implications and suggestions are made, including industrial and trade structure adjustment, application of water efficient technology and management measures, and appropriate capacity-building efforts. The methodology and findings may be useful for investigation of water footprints throughout various regions of the world. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Understanding the LCA and ISO water footprint: A response to ...

    Science.gov (United States)

    Water footprinting has emerged as an important approach to assess water use related effects from consumption of goods and services. Assessment methods are proposed by two different communities, the Water Footprint Network (WFN) and the Life Cycle Assessment (LCA) community. The proposed methods are broadly similar and encompass both the computation of water use and its impacts, but differ in communication of a water footprint result. In this paper, we explain the role and goal of LCA and ISO-compatible water footprinting and resolve the six issues raised by Hoekstra (2016) in “A critique on the water-scarcity weighted water footprint in LCA”. By clarifying the concerns, we identify both the overlapping goals in the WFN and LCA water footprint assessments and discrepancies between them. The main differing perspective between the WFN and LCA-based approach seems to relate to the fact that LCA aims to account for environmental impacts, while the WFN aims to account for water productivity of global fresh water as a limited resource. We conclude that there is potential to use synergies in research for the two approaches and highlight the need for proper declaration of the methods applied. This paper advances efforts to understand ways to accurately capture use of water in life cycle analysis in other contexts. As the paper indicates, there is a discussion about whether quantities of water should be weighted by some local stress factor. This paper attempts to brid

  13. Conformal polishing approach: Tool footprint analysis

    Directory of Open Access Journals (Sweden)

    José A Dieste

    2016-02-01

    Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

  14. Carbon Footprint Linked to transport infrastructures

    International Nuclear Information System (INIS)

    Crespo Garcia, L.; Jimenez Arroyo, F.

    2013-01-01

    Quantification of emissions of greenhouse effect gases associated to transport infrastructures has been addressed in different ways. The first tools for this purpose appeared with the application of ISO 14040 standards (Life cycle analysis) that, applied to the particular case of energetic resources, led to a new concept known as carbon footprint. There is a specific standard for this quantification (ISO 14064) according to which, for the case of infrastructures, emissions and environmental effects linked to the whole life cycle are assessed taking into account all the stages: building, exploitation, maintenance and dismantling. the key point to perform this analysis is the accurate definition of a calculation methodology to be applied to the inventory of activities covered, in order to avoid information lacks, overlaps or redundancies. Quantification tools for emissions are effectively a reality, but social and political will, supported by strong economical reasons recognizing energy as a vital resource, is necessary for these tools to be developed, enhanced and used in a systematic way as a key decision element to choice among different transport alternatives. (Author) 23 refs.

  15. The Water Footprint of Data Centers

    Directory of Open Access Journals (Sweden)

    Bora Ristic

    2015-08-01

    Full Text Available The internet and associated Information and Communications Technologies (ICT are diffusing at an astounding pace. As data centers (DCs proliferate to accommodate this rising demand, their environmental impacts grow too. While the energy efficiency of DCs has been researched extensively, their water footprint (WF has so far received little to no attention. This article conducts a preliminary WF accounting for cooling and energy consumption in DCs. The WF of DCs is estimated to be between 1047 and 151,061 m3/TJ. Outbound DC data traffic generates a WF of 1–205 liters per gigabyte (roughly equal to the WF of 1 kg of tomatos at the higher end. It is found that, typically, energy consumption constitues by far the greatest share of DC WF, but the level of uncertainty associated with the WF of different energy sources used by DCs makes a comprehensive assessment of DCs’ water use efficiency very challenging. Much better understanding of DC WF is urgently needed if a meaningful evaluation of this rapidly spreading service technology is to be gleaned and response measures are to be put into effect.

  16. Mealworms for Food: A Water Footprint Perspective

    Directory of Open Access Journals (Sweden)

    Pier Paolo Miglietta

    2015-11-01

    Full Text Available In this paper, we have explored the possibility of substituting traditional meat products with an alternative source of protein (insects in order to reduce human pressure on water. Insects, in fact, could represent a good alternative source of quality proteins and nutrients and they are already a very popular component of the diet of one third of the world’s population in approximately 80% of countries. In the study, we have taken into account only two species of edible insects (Tenebrio molitor and Zophobas morio mealworms, because they are already commercially produced even in Western countries, and for this reason it is possible to find specific data in literature about their diets. We have used the water footprint (WF as a reliable indicator to calculate the volume of water required for production and to compare different products. The final aim of the work is, in fact, to evaluate the WF of the production of edible insects with a focus on water consumption associated with protein content, in order to make a comparison with other animal protein sources. We have demonstrated that, from a freshwater resource perspective, it is more efficient to obtain protein through mealworms rather than other traditional farmed animals.

  17. Low Carbon Footprint Routes for Bird Watching

    Directory of Open Access Journals (Sweden)

    Wei-Ta Fang

    2015-03-01

    Full Text Available Bird watching is one of many recreational activities popular in ecotourism. Its popularity, therefore, prompts the need for studies on energy conservation. One such environmentally friendly approach toward minimizing bird watching’s ecological impact is ensuring a reduced carbon footprint by using an economic travel itinerary comprising a series of connected routes between tourist attractions that minimizes transit time. This study used a travel-route planning approach using geographic information systems to detect the shortest path, thereby solving the problems associated with time-consuming transport. Based on the results of road network analyses, optimal travel-route planning can be determined. These methods include simulated annealing (SA and genetic algorithms (GA. We applied two algorithms in our simulation research to detect which one is an appropriate algorithm for running carbon-routing algorithms at the regional scale. SA, which is superior to GA, is considered an excellent approach to search for the optimal path to reduce carbon dioxide and high gasoline fees, thereby controlling travel time by using the shortest travel routes.

  18. Footprint mismatch in lumbar total disc arthroplasty.

    Science.gov (United States)

    Gstoettner, Michaela; Michaela, Gstoettner; Heider, Denise; Denise, Heider; Liebensteiner, Michael; Bach, Christian Michael; Michael, Bach Christian

    2008-11-01

    Lumbar disc arthroplasty has become a popular modality for the treatment of degenerative disc disease. The dimensions of the implants are based on early published geometrical measurements of vertebrae; the majority of these were cadaver studies. The fit of the prosthesis in the intervertebral space is of utmost importance. An undersized implant may lead to subsidence, loosening and biomechanical failure due to an incorrect center of rotation. The aim of the present study was to measure the dimensions of lumbar vertebrae based on CT scans and assess the accuracy of match in currently available lumbar disc prostheses. A total of 240 endplates of 120 vertebrae were included in the study. The sagittal and mediolateral diameter of the upper and lower endplates were measured using a digital measuring system. For the levels L4/L5 and L5/S1, an inappropriate size match was noted in 98.8% (Prodisc L) and 97.6% (Charite) with regard to the anteroposterior diameter. Mismatch in the anterior mediolateral diameter was noted in 79.3% (Prodisc L) and 51.2% (Charite) while mismatch in the posterior mediolateral diameter was observed in 91.5% (Prodisc L) and 78% (Charite) of the endplates. Surgeons and manufacturers should be aware of the size mismatch of currently available lumbar disc prostheses, which may endanger the safety and efficacy of the procedure. Larger footprints of currently available total disc arthroplasties are required.

  19. Dealing with uncertainty in water scarcity footprints

    Science.gov (United States)

    Scherer, Laura; Pfister, Stephan

    2016-05-01

    Water scarcity adversely affects ecosystems, human well-being and the economy. It can be described by water scarcity indices (WSIs) which we calculated globally for the decades 1981-1990 and 2001-2010. Based on a model ensemble, we calculated the WSI for both decades including uncertainties. While there is a slight tendency of increased water scarcity in 2001-2010, the likelihood of the increase is rather low (53%). Climate change played only a minor role, but increased water consumption is more decisive. In the last decade, a large share of the global population already lived under highly water scarce conditions with a global average monthly WSI of 0.51 (on a scale from 0 to 1). Considering that globally there are enough water resources to satisfy all our needs, this highlights the need for regional optimization of water consumption. In addition, crop choices within a food group can help reduce humanity’s water scarcity footprint without reducing its nutritional value.

  20. Environmental footprint of constructed wetlands treating wastewater.

    Science.gov (United States)

    Gkika, Dimitra; Gikas, Georgios D; Tsihrintzis, Vassilios A

    2015-01-01

    The aim of the study is to determine environmentally friendlier construction materials for constructed wetland facilities treating wastewater. This is done by computing the environmental footprint of the facility based on the methodology of life cycle assessment (LCA). This methodology reveals the dominant aggravating processes during the construction of a constructed wetland (CW) and can help to create alternative environmentally friendlier solutions. This methodology was applied for the determination of the overall environmental profile of a hybrid CW facility. The LCA was applied first to the facility as originally designed, where reinforced concrete was used in some components. Then, alternative construction materials to reinforced concrete were used, such as earth covered with high density polyethylene (HDPE) or clay, and LCA was applied again. Earth structures were found to have reduced environmental impact compared to concrete ones, and clay was found environmentally friendlier compared to HDPE. Furthermore, estimation of the construction costs of the three scenarios indicate that the last scenario is also the least expensive.

  1. Stochastic simplified modelling of abrasive waterjet footprints

    Science.gov (United States)

    Torrubia, P. Lozano; Axinte, D. A.

    2016-01-01

    Abrasive micro-waterjet processing is a non-conventional machining method that can be used to manufacture complex shapes in difficult-to-cut materials. Predicting the effect of the jet on the surface for a given set of machine parameters is a key element of controlling the process. However, the noise of the process is significant, making it difficult to design reliable jet-path strategies that produce good quality parts via controlled-depth milling. The process is highly unstable and has a strong random component that can affect the quality of the workpiece, especially in the case of controlled-depth milling. This study describes a method to predict the variability of the jet footprint for different jet feed speeds. A stochastic partial differential equation is used to describe the etched surface as the jet is moved over it, assuming that the erosion process can be divided into two main components: a deterministic part that corresponds to the average erosion of the jet and a stochastic part that accounts for the noise generated at different stages of the process. The model predicts the variability of the trench profiles to within less than 8%. These advances could enable abrasive micro-waterjet technology to be a suitable technology for controlled-depth milling. PMID:27118905

  2. A Geometry-Based Cycle Slip Detection and Repair Method with Time-Differenced Carrier Phase (TDCP for a Single Frequency Global Position System (GPS + BeiDou Navigation Satellite System (BDS Receiver

    Directory of Open Access Journals (Sweden)

    Chuang Qian

    2016-12-01

    Full Text Available As the field of high-precision applications based on carriers continues to expand, the development of low-cost, small, modular receivers and their application in diverse scenarios and situations with complex data quality has increased the requirements of carrier-phase data preprocessing. A new geometry-based cycle slip detection and repair method based on Global Position System (GPS + BeiDou Navigation Satellite System (BDS is proposed. The method uses a Time-differenced Carrier Phase (TDCP model, which eliminates the Inner-System Bias (ISB between GPS and BDS, and it is conducive to the effective combination of GPS and BDS. It avoids the interference of the noise of the pseudo-range with cycle slip detection, while the cycle slips are preserved as integers. This method does not limit the receiver frequency number, and it is applicable to single-frequency data. The process is divided into two steps to detect and repair cycle slip. The first step is cycle slip detection, using the Improved Local Analysis Method (ILAM to find satellites that have cycle slips; The second step is to repair the cycle slips, including estimating the float solution of changes in ambiguities at the satellites that have cycle slips with the least squares method and the integer solution of the cycle slips by rounding. In the process of rounding, in addition to the success probability, a decimal test is carried out to validate the result. Finally, experiments with filed test data are carried out to prove the effectiveness of this method. The results show that the detectable cycle slips number with GPS + BDS is much greater than that with GPS. The method can also detect the non-integer outliers while fixing the cycle slip. The maximum decimal bias in repair is less than that with GPS. It implies that this method takes full advantages of multi-system.

  3. A Geometry-Based Cycle Slip Detection and Repair Method with Time-Differenced Carrier Phase (TDCP) for a Single Frequency Global Position System (GPS) + BeiDou Navigation Satellite System (BDS) Receiver.

    Science.gov (United States)

    Qian, Chuang; Liu, Hui; Zhang, Ming; Shu, Bao; Xu, Longwei; Zhang, Rufei

    2016-12-05

    As the field of high-precision applications based on carriers continues to expand, the development of low-cost, small, modular receivers and their application in diverse scenarios and situations with complex data quality has increased the requirements of carrier-phase data preprocessing. A new geometry-based cycle slip detection and repair method based on Global Position System (GPS) + BeiDou Navigation Satellite System (BDS) is proposed. The method uses a Time-differenced Carrier Phase (TDCP) model, which eliminates the Inner-System Bias (ISB) between GPS and BDS, and it is conducive to the effective combination of GPS and BDS. It avoids the interference of the noise of the pseudo-range with cycle slip detection, while the cycle slips are preserved as integers. This method does not limit the receiver frequency number, and it is applicable to single-frequency data. The process is divided into two steps to detect and repair cycle slip. The first step is cycle slip detection, using the Improved Local Analysis Method (ILAM) to find satellites that have cycle slips; The second step is to repair the cycle slips, including estimating the float solution of changes in ambiguities at the satellites that have cycle slips with the least squares method and the integer solution of the cycle slips by rounding. In the process of rounding, in addition to the success probability, a decimal test is carried out to validate the result. Finally, experiments with filed test data are carried out to prove the effectiveness of this method. The results show that the detectable cycle slips number with GPS + BDS is much greater than that with GPS. The method can also detect the non-integer outliers while fixing the cycle slip. The maximum decimal bias in repair is less than that with GPS. It implies that this method takes full advantages of multi-system.

  4. Assessment of building heights from pléiades satellite imagery for ...

    African Journals Online (AJOL)

    A tri-stereoscopic Pléiades satellite scene was used to process a digital surface model. An object-based image analysis provided the basic geometries and respective variables, which served as input features for a Support Vector Machine based classification. The comparison of the building footprints with ground reference ...

  5. PREDICT: Satellite tracking and orbital prediction

    Science.gov (United States)

    Magliacane, John A.

    2011-12-01

    PREDICT is an open-source, multi-user satellite tracking and orbital prediction program written under the Linux operating system. PREDICT provides real-time satellite tracking and orbital prediction information to users and client applications through: the system console the command line a network socket the generation of audio speechData such as a spacecraft's sub-satellite point, azimuth and elevation headings, Doppler shift, path loss, slant range, orbital altitude, orbital velocity, footprint diameter, orbital phase (mean anomaly), squint angle, eclipse depth, the time and date of the next AOS (or LOS of the current pass), orbit number, and sunlight and visibility information are provided on a real-time basis. PREDICT can also track (or predict the position of) the Sun and Moon. PREDICT has the ability to control AZ/EL antenna rotators to maintain accurate orientation in the direction of communication satellites. As an aid in locating and tracking satellites through optical means, PREDICT can articulate tracking coordinates and visibility information as plain speech.

  6. Dynamic Metabolic Footprinting Reveals the Key Components of Metabolic Network in Yeast Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Chumnanpuen, Pramote; Hansen, Michael Adsetts Edberg; Smedsgaard, Jørn

    2014-01-01

    relies on analysis at a single time point. Using direct infusion-mass spectrometry (DI-MS), we could observe the dynamic metabolic footprinting in yeast S. cerevisiae BY4709 (wild type) cultured on 3 different C-sources (glucose, glycerol, and ethanol) and sampled along 10 time points with 5 biological...... ionization (ESI) modes were performed to obtain the complete information about the metabolite content. Using sparse principal component analysis (Sparse PCA), we further identified those pairs of metabolites that significantly contribute to the separation. From the list of significant metabolite pairs, we...

  7. Scientific Satellites

    Science.gov (United States)

    1967-01-01

    Justification for this approach stems, first, from the sheer cost of trying to test at all levels. More significant is the fact that system-level tests are...specific impulses have been well worth the price until recently, when large production runs of small rockets (Scouts) and the sheer size of boosters in the...length: about 12 meters. Energy in unwanted oscillations is dissipated as heat in the damping spring. 348 SCIENTIFIC SATELLITES S/-- Piano Wire Silicone

  8. Steam sterilisation's energy and water footprint.

    Science.gov (United States)

    McGain, Forbes; Moore, Graham; Black, Jim

    2017-03-01

    Objective The aim of the present study was to quantify hospital steam steriliser resource consumption to provide baseline environmental data and identify possible efficiency gains. We sought to find the amount of steriliser electricity and water used for active cycles and for idling (standby), and the relationship between the electricity and water consumption and the mass and type of items sterilised. Methods We logged a hospital steam steriliser's electricity and water meters every 5min for up to 1 year. We obtained details of all active cycles (standard 134°C and accessory or 'test' cycles), recording item masses and types. Relationships were investigated for both the weight and type of items sterilised with electricity and water consumption. Results Over 304 days there were 2173 active cycles, including 1343 standard 134°C cycles that had an average load mass of 21.2kg, with 32% of cycles water used was 1243495L (79%). Standby used 21457kWh (40%) electricity and 329200L (21%) water. Total electricity and water consumption per mass sterilised was 1.9kWhkg -1 and 58Lkg -1 , respectively. The linear regression model predicting electricity use was: kWh=15.7+ 0.14×mass (in kg; R 2 =0.58, Pwater and item type were poor. Electricity and water use fell from 3kWhkg -1 and 200Lkg -1 , respectively, for 5-kg loads to 0.5kWhkg -1 and 20Lkg -1 , respectively, for 40-kg loads. Conclusions Considerable electricity and water use occurred during standby, load mass was only moderately predictive of electricity consumption and light loads were common yet inefficient. The findings of the present study are a baseline for steam sterilisation's environmental footprint and identify areas to improve efficiencies. What is known about the topic? There is increasing interest in the environmental effects of healthcare. Life cycle assessment ('cradle to grave') provides a scientific method of analysing environmental effects. Although data of the effects of steam sterilisation are integral

  9. Water footprint as a tool for integrated water resources management

    Science.gov (United States)

    Aldaya, Maite; Hoekstra, Arjen

    2010-05-01

    In a context where water resources are unevenly distributed and, in some regions precipitation and drought conditions are increasing, enhanced water management is a major challenge to final consumers, businesses, water resource users, water managers and policymakers in general. By linking a large range of sectors and issues, virtual water trade and water footprint analyses provide an appropriate framework to find potential solutions and contribute to a better management of water resources. The water footprint is an indicator of freshwater use that looks not only at direct water use of a consumer or producer, but also at the indirect water use. The water footprint of a product is the volume of freshwater used to produce the product, measured over the full supply chain. It is a multi-dimensional indicator, showing water consumption volumes by source and polluted volumes by type of pollution; all components of a total water footprint are specified geographically and temporally. The water footprint breaks down into three components: the blue (volume of freshwater evaporated from surface or groundwater systems), green (water volume evaporated from rainwater stored in the soil as soil moisture) and grey water footprint (the volume of polluted water associated with the production of goods and services). Closely linked to the concept of water footprint is that of virtual water trade, which represents the amount of water embedded in traded products. Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water productivity. Virtual water trade between nations and even continents could thus be used as an instrument to improve global water use efficiency and to achieve water security in water-poor regions of the world. The virtual water trade

  10. Essential amino acids: master regulators of nutrition and environmental footprint?

    Science.gov (United States)

    Tessari, Paolo; Lante, Anna; Mosca, Giuliano

    2016-01-01

    The environmental footprint of animal food production is considered several-fold greater than that of crops cultivation. Therefore, the choice between animal and vegetarian diets may have a relevant environmental impact. In such comparisons however, an often neglected issue is the nutritional value of foods. Previous estimates of nutrients’ environmental footprint had predominantly been based on either food raw weight or caloric content, not in respect to human requirements. Essential amino acids (EAAs) are key parameters in food quality assessment. We re-evaluated here the environmental footprint (expressed both as land use for production and as Green House Gas Emission (GHGE), of some animal and vegetal foods, titrated to provide EAAs amounts in respect to human requirements. Production of high-quality animal proteins, in amounts sufficient to match the Recommended Daily Allowances of all the EAAs, would require a land use and a GHGE approximately equal, greater o smaller (by only ±1-fold), than that necessary to produce vegetal proteins, except for soybeans, that exhibited the smallest footprint. This new analysis downsizes the common concept of a large advantage, in respect to environmental footprint, of crops vs. animal foods production, when human requirements of EAAs are used for reference. PMID:27221394

  11. Leucocytes, cytokines and satellite cells

    DEFF Research Database (Denmark)

    Paulsen, Gøran; Mikkelsen, Ulla Ramer; Raastad, Truls

    2012-01-01

    -damaging exercise', primarily eccentric exercise. We review the evidence for the notion that the degree of muscle damage is related to the magnitude of the cytokine response. In the third and final section, we look at the satellite cell response to a single bout of eccentric exercise, as well as the role...... variation in individual responses to a given exercise should, however be expected. The link between cytokine and satellite cell responses and exercise-induced muscle damage is not so clear The systemic cytokine response may be linked more closely to the metabolic demands of exercise rather than muscle...... damage. With the exception of IL-6, the sources of systemic cytokines following exercise remain unclear The satellite cell response to severe muscle damage is related to regeneration, whereas the biological significance of satellite cell proliferation after mild damage or non-damaging exercise remains...

  12. How to use water footprint as an indicator to assess the sustainability of food systems? Insights from a Mediterranean perspective

    Science.gov (United States)

    Altobelli, Filiberto; Meybeck, Alexandre; Gitz, Vincent; Dalla Marta, Anna

    2014-05-01

    The water footprint (WF) accounts for both the direct and indirect water use. It enables to calculate the water used to produce specific agricultural products. These have different water footprints. Thus the composition of the diet drives its water footprint, and ultimately agriculture's water consumption. This paper considers how the WF indicator could be used to assess the sustainability of food systems. FAO has started to study the notion of sustainable diets in order to design methods and indicators towards their assessment in different agro-ecological zones. A first issue is to identify issues which are critical to sustainability in a given area. Water scarcity is the most critical development problem in the Mediterranean area and the single most important factor in limiting agricultural growth. Water availability in the region has been declining steadily since the late 1950s. In turn, agriculture is one of the main water user. The Mediterranean diet model has been well scientifically characterized through its new revised pyramidal representation (Bach et al, 2011). Studies have calculated that the Mediterranean diet consumes less water then Anglo-Saxon types of diets. But such studies measure the water footprint of a model rather than the reality of food consumption patterns in the Mediterranean area. Moreover for a given water footprint, the "net" environmental impact depends not only on water consumption but also on water scarcity (WS) in the area of production, and also at the time of production. Therefore a more complete indicator to assess the sustainability of a food system from a consumption perspective could be WF/WS. It would include the distinction between green and blue water, as well as methodologies to determine the most appropriate scale (local, national, watershed) and measure it. Such a use of the WF, applied to domestic and imported food products alike, would enable to assess the water impact of food consumption. It could be completed by an

  13. Baseline ecological footprint of Sandia National Laboratories, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Coplen, Amy K.; Mizner, Jack Harry,; Ubechel, Norion M.

    2009-01-01

    The Ecological Footprint Model is a mechanism for measuring the environmental effects of operations at Sandia National Laboratories in Albuquerque, New Mexico (SNL/NM). This analysis quantifies environmental impact associated with energy use, transportation, waste, land use, and water consumption at SNL/NM for fiscal year 2005 (FY05). Since SNL/NMs total ecological footprint (96,434 gha) is greater than the waste absorption capacity of its landholdings (338 gha), it created an ecological deficit of 96,096 gha. This deficit is equal to 886,470lha, or about 3,423 square miles of Pinyon-Juniper woodlands and desert grassland. 89% of the ecological footprint can be attributed to energy use, indicating that in order to mitigate environmental impact, efforts should be focused on energy efficiency, energy reduction, and the incorporation of additional renewable energy alternatives at SNL/NM.

  14. Human footprints on greenhouse gas fluxes in cryogenic ecosystems

    Science.gov (United States)

    Karelin, D. V.; Goryachkin, S. V.; Zamolodchikov, D. G.; Dolgikh, A. V.; Zazovskaya, E. P.; Shishkov, V. A.; Kraev, G. N.

    2017-12-01

    Various human footprints on the flux of biogenic greenhouse gases from permafrost-affected soils in Arctic and boreal domains in Russia are considered. Tendencies of significant growth or suppression of soil CO2 fluxes change across types of human impact. Overall, the human impacts increase the mean value and variance of local soil CO2 flux. Human footprint on methane exchange between soil and atmosphere is mediated by drainage. However, all the types of human impact suppress the sources and increase sinks of methane to the land ecosystems. N2O flux grew under the considered types of human impact. Based on the results, we suggest that human footprint on soil greenhouse gases fluxes is comparable to the effect of climate change at an annual to decadal timescales.

  15. A carbon footprint simulation model for the cork oak sector.

    Science.gov (United States)

    Demertzi, Martha; Paulo, Joana Amaral; Arroja, Luís; Dias, Ana Cláudia

    2016-10-01

    In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. The carbon footprint of Greek households (1995–2012)

    International Nuclear Information System (INIS)

    Markaki, M.; Belegri-Roboli, A.; Sarafidis, U.; Mirasgedis, S.

    2017-01-01

    The goal of this paper is twofold: i) to investigate the carbon footprint of Greek households throughout the period 1995–2012, in order to identify the main socio-economic factors that affect GHG emissions, and ii) to evaluate the effectiveness of the implemented policies to tackle climate change. In this, a consumption-based emissions inventory approach is applied. The analysis is based on an environmentally-extended input-output model including direct CO 2 emissions from households, indirect CO 2 emissions from electricity consumption and indirect CO 2 emissions from energy used in the production of goods and services purchased by households, domestic or imported. Statistical analysis and appropriate regression models were developed in order to identify the main factors influencing the carbon footprint of Greek households. The results indicate that the observed trends during the period 1995–2008 can be attributed to the effect of high economic growth. This trend is partially counterbalanced by favorable weather conditions and the implementation of greenhouse mitigation policies and measures mainly in the supply side. Since 2008 the shrinking household income is the dominant driver. In addition, the effectiveness of energy conservation policies and measures in place is rather low, while the effect of imports is limited. - Highlights: • The factors influencing the carbon footprint of Greek households have been analyzed. • The analysis is based on consumption-based GHG inventories. • High economic growth resulted in carbon footprint increases during 1995–2008. • Carbon footprint reduction after 2008 is attributed to shrinking of household income. • Mitigation measures in power and manufacturing sectors reduced carbon footprint.

  17. Foot-printing of Protein Interactions by Tritium Labeling

    Energy Technology Data Exchange (ETDEWEB)

    Mousseau, Guillaume; Thomas, Olivier P.; Agez, Morgane; Thai, Robert; Cintrat, Jean-Christophe; Rousseau, Bernard [IBITECS, CNRS CEA, F-91191 Gif-sur-Yvette (France); Raffy, Quentin; Renault, Jean Philippe [IRAMIS, CNRS CEA, F-91191 Gif-sur-Yvette (France); Pin, Serge [IBITECS, CNRS CEA, F-91191 Gif-sur-Yvette (France); IRAMIS, CNRS CEA, F-91191 Gif-sur-Yvette (France); Ochsenbein, Francoise [IBITECS, CNRS CEA, F-91191 Gif-sur-Yvette (France); URA 2096, Systemes membranaires, photobiologie, stress et detoxication, CNRS CEA, F-91191 Gif-sur-Yvette (France)

    2010-07-01

    A new foot-printing method for mapping protein interactions has been developed, using tritium as a radioactive label. As residues involved in an interaction are less labeled when the complex is formed, they can be identified via comparison of the tritium incorporation of each residue of the bound protein with that of the unbound one. Application of this foot-printing method to the complex formed by the histone H3 fragment H3{sub 122-135} and the protein hAsflA{sub 1-156} afforded data in good agreement with NMR results. (authors)

  18. Effects of Globalisation on Carbon Footprints of Products

    DEFF Research Database (Denmark)

    Herrmann, Ivan Tengbjerg; Hauschild, Michael Zwicky

    2009-01-01

    Outsourcing of production from the industrialised countries to the newly industrialised economies holds the potential to increase wealth in both places, but what are the environmental costs of the globalised manufacturing systems? This paper looks into the changes in carbon footprint of manufactu......Outsourcing of production from the industrialised countries to the newly industrialised economies holds the potential to increase wealth in both places, but what are the environmental costs of the globalised manufacturing systems? This paper looks into the changes in carbon footprint...

  19. Metaheuristics for a tectonic development of hospital design footprints

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2014-01-01

    The present paper presents a model for footprint generation of hospital design based on functionalities. The model takes point of departure in layout generation for hospitals by use of a metaheuristic approach. The hospital functionalities with respective constraints lead a decomposition of the h......The present paper presents a model for footprint generation of hospital design based on functionalities. The model takes point of departure in layout generation for hospitals by use of a metaheuristic approach. The hospital functionalities with respective constraints lead a decomposition...

  20. Measuring your water footprint: What's next in water strategy

    OpenAIRE

    Hoekstra, Arjen Ysbert

    2008-01-01

    By now, carbon neutrality is such a catchphrase in the world of responsible business, it’s impossible to ignore the carbon footprint of a new product or service. But with the exception of a few companies like Coca-Cola, Nestlé and Suez, the concept of water neutrality, or measuring your water footprint, is still under the radar. It’s time to take note: In a landscape where the demand for water is fast outstripping supply, focusing on water neutrality is a key corporate strategy in managing wa...

  1. A carbon footprint simulation model for the cork oak sector

    International Nuclear Information System (INIS)

    Demertzi, Martha; Paulo, Joana Amaral; Arroja, Luís; Dias, Ana Cláudia

    2016-01-01

    In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved. - Highlights: • A carbon footprint simulation model (CCFM) for

  2. A carbon footprint simulation model for the cork oak sector

    Energy Technology Data Exchange (ETDEWEB)

    Demertzi, Martha, E-mail: marthademertzi@ua.pt [Center for Environmental and Marine Studies (CESAM), Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Paulo, Joana Amaral, E-mail: joanaap@isa.ulisboa.pt [Center of Forest Studies (CEF), Superior Institute of Agronomy (ISA), Tapada da Ajuda, University of Lisbon, 1349-017 Lisbon (Portugal); Arroja, Luís, E-mail: arroja@ua.pt [Center for Environmental and Marine Studies (CESAM), Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Dias, Ana Cláudia, E-mail: acdias@ua.pt [Center for Environmental and Marine Studies (CESAM), Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal)

    2016-10-01

    In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved. - Highlights: • A carbon footprint simulation model (CCFM) for

  3. The external water footprint of the Netherlands: Quantification and impact assessment

    OpenAIRE

    van Oel, P.R.; Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2008-01-01

    This study quantifies the external water footprint of the Netherlands by partner country and import product and assesses the impact of this footprint by contrasting the geographically explicit water footprint with water scarcity in the different parts of the world. Hotspots are identified as the places where the external water footprint of Dutch consumers is significant on the one hand and where water scarcity is serious on the other hand. The study shows that Dutch consumption implies the us...

  4. Assessing the Blue and Green Water Footprint of Lucerne for Milk Production in South Africa

    OpenAIRE

    Morne E. Scheepers; Henry Jordaan

    2016-01-01

    The Global Water Footprint Standard approach was used to calculate the volumetric blue and green water footprint indicator for lucerne production as important feed for dairy cows in a major lucerne production region in South Africa. The degree of sustainability of water use then was assessed by comparing water use to water availability for the region. The results show a volumetric water footprint indicator of 378 m3/tonne of lucerne. Of the total blue and green water footprint, 55% is green w...

  5. Geostationary Satellite (GOES) Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Visible and Infrared satellite imagery taken from radiometer instruments on SMS (ATS) and GOES satellites in geostationary orbit. These satellites produced...

  6. Aerosol Optical Properties Derived from the DRAGON-NE Asia Campaign, and Implications for a Single-Channel Algorithm to Retrieve Aerosol Optical Depth in Spring from Meteorological Imager (MI) On-Board the Communication, Ocean, and Meteorological Satellite (COMS)

    Science.gov (United States)

    Kim, M.; Kim, J.; Jeong, U.; Kim, W.; Hong, H.; Holben, B.; Eck, T. F.; Lim, J.; Song, C.; Lee, S.; hide

    2016-01-01

    An aerosol model optimized for northeast Asia is updated with the inversion data from the Distributed Regional Aerosol Gridded Observation Networks (DRAGON)-northeast (NE) Asia campaign which was conducted during spring from March to May 2012. This updated aerosol model was then applied to a single visible channel algorithm to retrieve aerosol optical depth (AOD) from a Meteorological Imager (MI) on-board the geostationary meteorological satellite, Communication, Ocean, and Meteorological Satellite (COMS). This model plays an important role in retrieving accurate AOD from a single visible channel measurement. For the single-channel retrieval, sensitivity tests showed that perturbations by 4 % (0.926 +/- 0.04) in the assumed single scattering albedo (SSA) can result in the retrieval error in AOD by over 20 %. Since the measured reflectance at the top of the atmosphere depends on both AOD and SSA, the overestimation of assumed SSA in the aerosol model leads to an underestimation of AOD. Based on the AErosol RObotic NETwork (AERONET) inversion data sets obtained over East Asia before 2011, seasonally analyzed aerosol optical properties (AOPs) were categorized by SSAs at 675 nm of 0.92 +/- 0.035 for spring (March, April, and May). After the DRAGON-NE Asia campaign in 2012, the SSA during spring showed a slight increase to 0.93 +/- 0.035. In terms of the volume size distribution, the mode radius of coarse particles was increased from 2.08 +/- 0.40 to 2.14 +/- 0.40. While the original aerosol model consists of volume size distribution and refractive indices obtained before 2011, the new model is constructed by using a total data set after the DRAGON-NE Asia campaign. The large volume of data in high spatial resolution from this intensive campaign can be used to improve the representative aerosol model for East Asia. Accordingly, the new AOD data sets retrieved from a single-channel algorithm, which uses a precalculated look-up table (LUT) with the new aerosol model, show

  7. Aerosol optical properties derived from the DRAGON-NE Asia campaign, and implications for a single-channel algorithm to retrieve aerosol optical depth in spring from Meteorological Imager (MI on-board the Communication, Ocean, and Meteorological Satellite (COMS

    Directory of Open Access Journals (Sweden)

    M. Kim

    2016-02-01

    Full Text Available An aerosol model optimized for northeast Asia is updated with the inversion data from the Distributed Regional Aerosol Gridded Observation Networks (DRAGON-northeast (NE Asia campaign which was conducted during spring from March to May 2012. This updated aerosol model was then applied to a single visible channel algorithm to retrieve aerosol optical depth (AOD from a Meteorological Imager (MI on-board the geostationary meteorological satellite, Communication, Ocean, and Meteorological Satellite (COMS. This model plays an important role in retrieving accurate AOD from a single visible channel measurement. For the single-channel retrieval, sensitivity tests showed that perturbations by 4 % (0.926 ± 0.04 in the assumed single scattering albedo (SSA can result in the retrieval error in AOD by over 20 %. Since the measured reflectance at the top of the atmosphere depends on both AOD and SSA, the overestimation of assumed SSA in the aerosol model leads to an underestimation of AOD. Based on the AErosol RObotic NETwork (AERONET inversion data sets obtained over East Asia before 2011, seasonally analyzed aerosol optical properties (AOPs were categorized by SSAs at 675 nm of 0.92 ± 0.035 for spring (March, April, and May. After the DRAGON-NE Asia campaign in 2012, the SSA during spring showed a slight increase to 0.93 ± 0.035. In terms of the volume size distribution, the mode radius of coarse particles was increased from 2.08 ± 0.40 to 2.14 ± 0.40. While the original aerosol model consists of volume size distribution and refractive indices obtained before 2011, the new model is constructed by using a total data set after the DRAGON-NE Asia campaign. The large volume of data in high spatial resolution from this intensive campaign can be used to improve the representative aerosol model for East Asia. Accordingly, the new AOD data sets retrieved from a single-channel algorithm, which uses a precalculated look-up table (LUT with the new aerosol model

  8. Environmental impact of an Italian wine bottle: Carbon and water footprint assessment.

    Science.gov (United States)

    Bonamente, Emanuele; Scrucca, Flavio; Rinaldi, Sara; Merico, Maria Cleofe; Asdrubali, Francesco; Lamastra, Lucrezia

    2016-08-01

    The food sector represents one of the major impacting sectors from an environmental point of view and, among all the products, wine emerges as one of the most studied by the literature. Single-issue approaches are commonly used, but a more comprehensive analysis is desirable, since a single indicator does not properly track the pressure on the environment. This paper presents a combined carbon and water footprint assessment, with a cradle to grave approach, for a protected designation of origin Italian red wine, and suggests a correlation among the two indicators across the life cycle phases. A total CF equal to 1.07±0.09kgCO2eq/bottle and a total WF equal to 580±30l/bottle were calculated for the studied product and a direct proportionality was found between the total CF and the sum of WFgrey(indirect) and WFblue. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Post No Photos, Leave No Trace: Children's Digital Footprint Management Strategies

    Science.gov (United States)

    Buchanan, Rachel; Southgate, Erica; Smith, Shamus P.; Murray, Tiana; Noble, Brittany

    2017-01-01

    Given that today's children are prolific users of the internet, concern has been raised about the future impact of the digital footprints they are currently generating. Here, we report on the "Best Footprint Forward" project which utilised focus groups to investigate the digital footprint awareness of 33 children (ranging in age from 10…

  10. Water footprints of nations: water use by people as a function of their consumption pattern

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert; Chapagain, Ashok

    2007-01-01

    The water footprint shows the extent of water use in relation to consumption of people. The water footprint of a country is defined as the volume of water needed for the production of the goods and services consumed by the inhabitants of the country. The internal water footprint is the volume of

  11. Can Digital Footprints Lead to Greater Financial Inclusion?

    OpenAIRE

    Kabir Kumar; Kim Muhota

    2012-01-01

    Poor people's use of their mobile phones generates data that leave what can be called a digital footprint. These data are among a handful of sources of electronic information that exist on poor people. This information is potentially powerful but has not yet been used in ways to radically impact financial access for poor people. This brief highlights some early experience on the potential ...

  12. Mitigating climate change by minimising the carbon footprint and ...

    African Journals Online (AJOL)

    This article investigates the role that architecture can play in mitigating climate change .... on the carbon footprint of companies listed on the Johannesburg ... This article thus focuses on the BRT trunk-route 'stations' as key components within the entire transport network. 2. Research methodology. In order to identify possible ...

  13. Application of the DIY carbon footprint calculator to a wastewater ...

    African Journals Online (AJOL)

    bic sludge blanket (UASB) digester concept. The wastewater and water treatment sector is a substantial con- tributor to global GHGs in the form of carbon dioxide, meth- ane and nitrous oxide. There are several possibilities which can reduce the cost of water and sanitation services and also reduce their carbon footprint.

  14. Lebanese household carbon footprint: Measurements, analysis and challenges

    Science.gov (United States)

    Nasr, Rawad; Tall, Ibrahim; Nachabe, Nour; Chaaban, Farid

    2016-07-01

    The main purpose of this paper is to estimate the carbon footprint of a typical Lebanese household, and compare the results with international standards and trends. The estimation of this footprint will reflect the impact of the daily Lebanese household activities on the environment in terms of carbon dioxide emissions. The method used in estimating the carbon emissions is based on gathering the primary footprints from various household activities. Another proposed method that provides more accurate results is the estimation of emissions based on secondary footprint, which reflects the total emissions not only from the regular activities but also from a lifecycle perspective. Practical and feasible solutions were proposed to help reduce the amount of C02 emissions per household. This would lead to a better air quality, money savings, greenhouse gases emissions reduction and would ensure the sustainability and prosperity of future generations. A detailed survey was conducted in which the questions were focused mainly on energy, food, and transportation issues. The fourteen questions were addressed to one hundred families in different Lebanese regions coming from different social and economic backgrounds. This diversity would constitute a reflective sample of the actual Lebanese society, allowing us to extrapolate the gathered results on a national level.

  15. Measuring your water footprint: What's next in water strategy

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert

    2008-01-01

    By now, carbon neutrality is such a catchphrase in the world of responsible business, it’s impossible to ignore the carbon footprint of a new product or service. But with the exception of a few companies like Coca-Cola, Nestlé and Suez, the concept of water neutrality, or measuring your water

  16. The carbon footprint and embodied energy of construction material ...

    African Journals Online (AJOL)

    Source: Hugo, 2010: own picture. 2.4.1 Choosing an appropriate carbon-footprint and embodied energy inventory. LCA studies use a wide range of CF and EE data15 .... use alternative energy-efficient technologies, and the remaining ... 19 Conduiting, wiring and electrical equipment were excluded from the analysis.

  17. Carbon footprint of construction using industrialised building system

    Science.gov (United States)

    Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

    2017-11-01

    Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

  18. The WULCA consensus characterization model for water scarcity footprints

    NARCIS (Netherlands)

    Boulay, Anne Marie; Bare, Jane; Benini, Lorenzo; Berger, Markus; Lathuillière, Michael J.; Manzardo, Alessandro; Margni, Manuele; Motoshita, Masaharu; Núñez, Montserrat; Pastor, Amandine Valerie; Ridoutt, Bradley; Oki, Taikan; Worbe, Sebastien; Pfister, Stephan

    2018-01-01

    Purpose: Life cycle assessment (LCA) has been used to assess freshwater-related impacts according to a new water footprint framework formalized in the ISO 14046 standard. To date, no consensus-based approach exists for applying this standard and results are not always comparable when different

  19. Sustainability of the water footprint of the Spanish pork industry

    NARCIS (Netherlands)

    de Miguel, Ángel; Hoekstra, Arjen Ysbert; Garcia-Calvo, Eloy

    2015-01-01

    Around 92% of the humanity's footprint (WF) relates to the agricultural sector, and a considerable proportion of this is associated with animal farming. In Spain, the swine sector accounts for 11% of agricultural output in economic terms and makes substantial demands on freshwater resources. In this

  20. The water footprint: a tool for governments, companies and investors

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert

    2011-01-01

    The water footprint of Europe – the total volume of water used for producing all commodities consumed by European citizens – has been significantly externalised to other parts of the world. Europe is for example a large importer of cotton, one of the most thirsty crops. Coffee is imported from

  1. Mainstreaming life cycle thinking through a consistent approach to footprints

    DEFF Research Database (Denmark)

    Ridoutt, Brad; Pfister, Stephan; Manzardo, Alessandro

    2016-01-01

    to a larger framework designed for comprehensive evaluation of environmental performance and trade-offs. The task force has also developed a univers al footprint definition. In parallel to Area of Protection, we introduce Area of Concern. In the same way that LCA uses impact category indicators to assess...

  2. Water footprint assessment to inform water management and policy ...

    African Journals Online (AJOL)

    One method to inform decisions with respect to sustainable, efficient and equitable water allocation and use is water footprint assessment (WFA). This paper presents a preliminary WFA of South Africa (SA) based on data for the period 1996–2005. Crop production was found to contribute about 75% of the total water ...

  3. Computers and the Environment: Minimizing the Carbon Footprint

    Science.gov (United States)

    Kaestner, Rich

    2009-01-01

    Computers can be good and bad for the environment; one can maximize the good and minimize the bad. When dealing with environmental issues, it's difficult to ignore the computing infrastructure. With an operations carbon footprint equal to the airline industry's, computer energy use is only part of the problem; everyone is also dealing with the use…

  4. The U.S. beef cattle industry: The carbon footprint

    Science.gov (United States)

    This was an invited 20 minute oral presentation concerning the carbon footprint of the U.S. beef cattle industry. The audience at the workshop (about 30 people) included university professors and graduate students from agriculture and enviornmental sciences. The presentation included a brief revie...

  5. Calculating CO2 footprint of the organic greenhouse horticulture

    NARCIS (Netherlands)

    Vermeulen, P.C.M.

    2010-01-01

    In recent years the horticultural sector has been confronted with questions about the carbon footprint of its products. However, the global standards used to calculate the greenhouse gas (GHG) emissions have some gaps that do not address the sector specific issues for horticulture, such as crop

  6. The water footprint of the EU for different diets

    NARCIS (Netherlands)

    Vanham, D.; Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2013-01-01

    In this paper, the EU28 (EU27 and Croatia) water footprint of consumption (WFcons) for different diets is analysed: the current diet (REF, period 1996–2005), a healthy diet (DGE), a vegetarian (VEG) and combined (COM) diet. By far the largest fraction of the total WFcons (4815 lcd) relates to the

  7. Application of the DIY carbon footprint calculator to a wastewater ...

    African Journals Online (AJOL)

    ... own 'green' energy by using anaerobically produced methane gas as a green energy alternative. This investigation demonstrates how the baseline carbon footprint of a wastewater treatment works can be reduced by considering viable options such as biogas to power generation, process re-design and drives to improve ...

  8. Water Footprint and Virtual Water Trade of Brazil

    NARCIS (Netherlands)

    da Silva, Vicente de Paulo R.; de Oliveira, Sonaly D.; Hoekstra, Arjen Ysbert; Neto, Jose Dantas; Campos, João Hugo B.C.; Braga, Celia C.; Araújo, Lincoln Eloi; Oliveira Aleixo, Danilo; de Brito, Jose Ivaldo B.; de Souza, Marcio Dionisio; de Holanda, Romildo M.

    2016-01-01

    Freshwater scarcity has increased at an alarming rate worldwide; improved water management plays a vital role in increasing food production and security. This study aims to determine the water footprint of Brazil’s national food consumption, the virtual water flows associated with international

  9. Food and Beverage Footprint, December 2010 (MECS 2006)

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-06-01

    Manufacturing energy and carbon footprints map fuel energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing industry sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released due to the combustion of fuel. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high-level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The energy data is primarily provided by the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), and therefore reflects consumption in the year 2006, when the survey was last completed.

  10. Food and Beverage Footprint, October 2012 (MECS 2006)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-17

    Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.

  11. Water footprint of growing vegetables in selected smallholder ...

    African Journals Online (AJOL)

    Crop water footprint (WF) is the volume of fresh water used to produce a certain crop in all the steps in the production line. The CROPWAT model was used to calculate crop evapotranspiration, differentiating green and blue water in Zanyokwe (ZIS), Thabina (TIS) and Tugela Ferry (TFIS) Irrigation Schemes. Green beans ...

  12. Management options to reduce the carbon footprint of livestock products

    DEFF Research Database (Denmark)

    Hermansen, John Erik; Kristensen, Troels

    2011-01-01

    Livestock products carry a large carbon footprint compared with other foods, and thus there is a need to focus on how to reduce it. The major contributing factors are emissions related to feed use and manure handling as well as the nature of the land required to produce the feed in question. We can...

  13. Burning water: The water footprint of biofuel-based transport

    NARCIS (Netherlands)

    Gerbens-Leenes, Winnie; Hoekstra, Arjen Ysbert

    2010-01-01

    The trend towards substitution of conventional transport fuels by biofuels requires additional water. The EU aims to replace 10 percent of total transport fuels by biofuels by 2020. This study calculates the water footprint (WF) of different transport modes using bio-ethanol, biodiesel or

  14. Water footprint assessment to inform water management and policy ...

    African Journals Online (AJOL)

    2015-04-03

    Apr 3, 2015 ... While SA is a net virtual water importer, the virtual water trade analysis revealed that a large share of ... Energy released the long-awaited position paper on the South ..... The average water footprint of national consumption in SA for the period 1996–2005 (million m3/yr) (Source: Mekonnen and. Hoekstra ...

  15. The uncertain climate footprint of wetlands under human pressure

    NARCIS (Netherlands)

    Petrescu, A.J.; Lohila, A.; Tuovinen, J.P.; Baldocchi, D.D.; Desai, A.R.; Veenendaal, E.M.; Schrier-Uijl, A.

    2015-01-01

    Significant climate risks are associated with a positive carbon–temperature feedback in northern latitude carbon-rich ecosystems, making an accurate analysis of human impacts on the net greenhouse gas balance of wetlands a priority. Here, we provide a coherent assessment of the climate footprint of

  16. Carbon footprint of urban source separation for nutrient recovery.

    Science.gov (United States)

    Kjerstadius, H; Bernstad Saraiva, A; Spångberg, J; Davidsson, Å

    2017-07-15

    Source separation systems for the management of domestic wastewater and food waste has been suggested as more sustainable sanitation systems for urban areas. The present study used an attributional life cycle assessment to investigate the carbon footprint and potential for nutrient recovery of two sanitation systems for a hypothetical urban area in Southern Sweden. The systems represented a typical Swedish conventional system and a possible source separation system with increased nutrient recovery. The assessment included the management chain from household collection, transport, treatment and final return of nutrients to agriculture or disposal of the residuals. The results for carbon footprint and nutrient recovery (phosphorus and nitrogen) concluded that the source separation system could increase nutrient recovery (0.30-0.38 kg P capita -1 year -1 and 3.10-3.28 kg N capita -1 year -1 ), while decreasing the carbon footprint (-24 to -58 kg CO 2 -eq. capita -1 year -1 ), compared to the conventional system. The nutrient recovery was increased by the use of struvite precipitation and ammonium stripping at the wastewater treatment plant. The carbon footprint decreased, mainly due to the increased biogas production, increased replacement of mineral fertilizer in agriculture and less emissions of nitrous oxide from wastewater treatment. In conclusion, the study showed that source separation systems could potentially be used to increase nutrient recovery from urban areas, while decreasing the climate impact. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Mitigating climate change by minimising the carbon footprint and ...

    African Journals Online (AJOL)

    The analysis determines that lower scaled, spatially economical structures using low embodied energy materials will positively contribute to reduced carbon footprints and thus climate change mitigation strategies. The outcomes of the article also set a benchmark for prospective life-cycle assessments (LCA) and establish ...

  18. Antagonism in the carbon footprint between beef and dairy ...

    African Journals Online (AJOL)

    The higher increase in production (milk) of intensive dairy cows, compared to the increase in production (calf weight) of intensive beef cows, explains the antagonism in the carbon footprint between different beef and dairy production systems. Unfortunately, carbon sequestration estimates have been neglected and thus the ...

  19. Advanced entry guidance algorithm with landing footprint computation

    Science.gov (United States)

    Leavitt, James Aaron

    The design and performance evaluation of an entry guidance algorithm for future space transportation vehicles is presented. The algorithm performs two functions: on-board trajectory planning and trajectory tracking. The planned longitudinal path is followed by tracking drag acceleration, as is done by the Space Shuttle entry guidance. Unlike the Shuttle entry guidance, lateral path curvature is also planned and followed. A new trajectory planning function for the guidance algorithm is developed that is suitable for suborbital entry and that significantly enhances the overall performance of the algorithm for both orbital and suborbital entry. In comparison with the previous trajectory planner, the new planner produces trajectories that are easier to track, especially near the upper and lower drag boundaries and for suborbital entry. The new planner accomplishes this by matching the vehicle's initial flight path angle and bank angle, and by enforcing the full three-degree-of-freedom equations of motion with control derivative limits. Insights gained from trajectory optimization results contribute to the design of the new planner, giving it near-optimal downrange and crossrange capabilities. Planned trajectories and guidance simulation results are presented that demonstrate the improved performance. Based on the new planner, a method is developed for approximating the landing footprint for entry vehicles in near real-time, as would be needed for an on-board flight management system. The boundary of the footprint is constructed from the endpoints of extreme downrange and crossrange trajectories generated by the new trajectory planner. The footprint algorithm inherently possesses many of the qualities of the new planner, including quick execution, the ability to accurately approximate the vehicle's glide capabilities, and applicability to a wide range of entry conditions. Footprints can be generated for orbital and suborbital entry conditions using a pre

  20. Climate Change Mitigation by Reducing Organizations' Carbon Footprint

    International Nuclear Information System (INIS)

    Juric, Z.; Durdevic, D.; Luttenberg, L.; Ljubas, D.

    2016-01-01

    On the international level a scientific consensus regarding the existence of climate change and global warming has been achieved. The effects of climate change can already be felt through an increase in global average temperature, sea and ocean level, the change in frequency and intensity of precipitation and extreme weather events in many parts of the world. The 5th Intergovernmental Panel on Climate Change (IPCC) report concludes that climate change is ongoing and that it is necessary to take significant mitigation and adaptation measures. Calculation and reduction of organisations' carbon footprint is an important part of the possible solution to climate change mitigation. In order to establish a harmonized approach to calculate the carbon footprint, the implementation of the three-year LIFE Clim'Foot project was started in September 2015, in France, Italy, Greece, Hungary and Croatia. Within the project, a model for the carbon footprint calculation has been developed, adapted to the Croatian circumstances, together with a national database of emission factors with at least 150 country specific and 150 European emission factors. The model is based on Bilan Carbon tool developed in France in conformity with the GHG protocol, ISO standards (ISO 14064 and ISO/TR 14069), recommendations of the European Commission, as well as guidelines and reports of the IPCC. The LIFE Clim'Foot project framework implies the inclusion of organisations from public and private sector, which would ensure testing of the model in practice. The calculation of the carbon footprint will introduce them to the structure of the GHG emissions and will also enable the selection of the appropriate mitigation measures. Beside the calculation, the project implies development of the Strategy for carbon footprint management and the Action plan to mitigate the carbon footprint. The purpose of development of Strategy and Action plan is to maximise the reduction of the organizations

  1. Water balance of global aquifers revealed by groundwater footprint.

    Science.gov (United States)

    Gleeson, Tom; Wada, Yoshihide; Bierkens, Marc F P; van Beek, Ludovicus P H

    2012-08-09

    Groundwater is a life-sustaining resource that supplies water to billions of people, plays a central part in irrigated agriculture and influences the health of many ecosystems. Most assessments of global water resources have focused on surface water, but unsustainable depletion of groundwater has recently been documented on both regional and global scales. It remains unclear how the rate of global groundwater depletion compares to the rate of natural renewal and the supply needed to support ecosystems. Here we define the groundwater footprint (the area required to sustain groundwater use and groundwater-dependent ecosystem services) and show that humans are overexploiting groundwater in many large aquifers that are critical to agriculture, especially in Asia and North America. We estimate that the size of the global groundwater footprint is currently about 3.5 times the actual area of aquifers and that about 1.7 billion people live in areas where groundwater resources and/or groundwater-dependent ecosystems are under threat. That said, 80 per cent of aquifers have a groundwater footprint that is less than their area, meaning that the net global value is driven by a few heavily overexploited aquifers. The groundwater footprint is the first tool suitable for consistently evaluating the use, renewal and ecosystem requirements of groundwater at an aquifer scale. It can be combined with the water footprint and virtual water calculations, and be used to assess the potential for increasing agricultural yields with renewable groundwaterref. The method could be modified to evaluate other resources with renewal rates that are slow and spatially heterogeneous, such as fisheries, forestry or soil.

  2. The Human Footprint in Mexico: Physical Geography and Historical Legacies

    Science.gov (United States)

    Ortega-Rubio, Alfredo; Kolb, Melanie; Bezaury Creel, Juan E.

    2015-01-01

    Using publicly available data on land use and transportation corridors we calculated the human footprint index for the whole of Mexico to identify large-scale spatial patterns in the anthropogenic transformation of the land surface. We developed a map of the human footprint for the whole country and identified the ecological regions that have most transformed by human action. Additionally, we analyzed the extent to which (a) physical geography, expressed spatially in the form of biomes and ecoregions, compared to (b) historical geography, expressed as the spatial distribution of past human settlements, have driven the patterns of human modification of the land. Overall Mexico still has 56% of its land surface with low impact from human activities, but these areas are not evenly distributed. The lowest values are on the arid north and northwest, and the tropical southeast, while the highest values run along the coast of the Gulf of Mexico and from there inland along an east-to-west corridor that follows the Mexican transversal volcanic ranges and the associated upland plateau. The distribution of low- and high footprint areas within ecoregions forms a complex mosaic: the generally well-conserved Mexican deserts have some highly transformed agro-industrial areas, while many well-conserved, low footprint areas still persist in the highly-transformed ecoregions of central Mexico. We conclude that the spatial spread of the human footprint in Mexico is both the result of the limitations imposed by physical geography to human development at the biome level, and, within different biomes, of a complex history of past civilizations and technologies, including the 20th Century demographic explosion but also the spatial pattern of ancient settlements that were occupied by the Spanish Colony. PMID:25803839

  3. The human footprint in Mexico: physical geography and historical legacies.

    Science.gov (United States)

    González-Abraham, Charlotte; Ezcurra, Exequiel; Garcillán, Pedro P; Ortega-Rubio, Alfredo; Kolb, Melanie; Bezaury Creel, Juan E

    2015-01-01

    Using publicly available data on land use and transportation corridors we calculated the human footprint index for the whole of Mexico to identify large-scale spatial patterns in the anthropogenic transformation of the land surface. We developed a map of the human footprint for the whole country and identified the ecological regions that have most transformed by human action. Additionally, we analyzed the extent to which (a) physical geography, expressed spatially in the form of biomes and ecoregions, compared to (b) historical geography, expressed as the spatial distribution of past human settlements, have driven the patterns of human modification of the land. Overall Mexico still has 56% of its land surface with low impact from human activities, but these areas are not evenly distributed. The lowest values are on the arid north and northwest, and the tropical southeast, while the highest values run along the coast of the Gulf of Mexico and from there inland along an east-to-west corridor that follows the Mexican transversal volcanic ranges and the associated upland plateau. The distribution of low- and high footprint areas within ecoregions forms a complex mosaic: the generally well-conserved Mexican deserts have some highly transformed agro-industrial areas, while many well-conserved, low footprint areas still persist in the highly-transformed ecoregions of central Mexico. We conclude that the spatial spread of the human footprint in Mexico is both the result of the limitations imposed by physical geography to human development at the biome level, and, within different biomes, of a complex history of past civilizations and technologies, including the 20th Century demographic explosion but also the spatial pattern of ancient settlements that were occupied by the Spanish Colony.

  4. The human footprint in Mexico: physical geography and historical legacies.

    Directory of Open Access Journals (Sweden)

    Charlotte González-Abraham

    Full Text Available Using publicly available data on land use and transportation corridors we calculated the human footprint index for the whole of Mexico to identify large-scale spatial patterns in the anthropogenic transformation of the land surface. We developed a map of the human footprint for the whole country and identified the ecological regions that have most transformed by human action. Additionally, we analyzed the extent to which (a physical geography, expressed spatially in the form of biomes and ecoregions, compared to (b historical geography, expressed as the spatial distribution of past human settlements, have driven the patterns of human modification of the land. Overall Mexico still has 56% of its land surface with low impact from human activities, but these areas are not evenly distributed. The lowest values are on the arid north and northwest, and the tropical southeast, while the highest values run along the coast of the Gulf of Mexico and from there inland along an east-to-west corridor that follows the Mexican transversal volcanic ranges and the associated upland plateau. The distribution of low- and high footprint areas within ecoregions forms a complex mosaic: the generally well-conserved Mexican deserts have some highly transformed agro-industrial areas, while many well-conserved, low footprint areas still persist in the highly-transformed ecoregions of central Mexico. We conclude that the spatial spread of the human footprint in Mexico is both the result of the limitations imposed by physical geography to human development at the biome level, and, within different biomes, of a complex history of past civilizations and technologies, including the 20th Century demographic explosion but also the spatial pattern of ancient settlements that were occupied by the Spanish Colony.

  5. Iodine Satellite

    Science.gov (United States)

    Dankanich, John; Kamhawi, Hani; Szabo, James

    2015-01-01

    This project is a collaborative effort to mature an iodine propulsion system while reducing risk and increasing fidelity of a technology demonstration mission concept. 1 The FY 2014 tasks include investments leveraged throughout NASA, from multiple mission directorates, as a partnership with NASA Glenn Research Center (GRC), a NASA Marshall Space Flight Center (MSFC) Technology Investment Project, and an Air Force partnership. Propulsion technology is often a critical enabling technology for space missions. NASA is investing in technologies to enable high value missions with very small and low-cost spacecraft, even CubeSats. However, these small spacecraft currently lack any appreciable propulsion capability. CubeSats are typically deployed and drift without any ability to transfer to higher value orbits, perform orbit maintenance, or deorbit. However, the iodine Hall system can allow the spacecraft to transfer into a higher value science orbit. The iodine satellite (iSAT) will be able to achieve a (Delta)V of >500 m/s with 1,300 s. The iSAT spacecraft, illustrated in figure 1, is currently a 12U CubeSat. The spacecraft chassis will be constructed from aluminum with a finish to prevent iodine-driven corrosion. The iSAT spacecraft includes full three-axis control using wheels, magnetic torque rods, inertial management unit, and a suite of sensors and optics. The spacecraft will leverage heat generated by spacecraft components and radiators for a passive thermal control system.

  6. Reducing Students' Carbon Footprints Using Personal Carbon Footprint Management System Based on Environmental Behavioural Theory and Persuasive Technology

    Science.gov (United States)

    Lin, Shyh-ming

    2016-01-01

    This study applied environmental behavioural theories to develop a personal carbon footprint management system and used persuasive technology to implement it. The system serves as an educational system to improve the determinants of students' low-carbon behaviours, to promote low-carbon concepts and to facilitate their carbon management. To assess…

  7. Iodine Satellite

    Science.gov (United States)

    Kamhawi, Hani; Dankanich, John; Martinez, Andres; Petro, Andrew

    2015-01-01

    The Iodine Satellite (iSat) spacecraft will be the first CubeSat to demonstrate high change in velocity from a primary propulsion system by using Hall thruster technology and iodine as a propellant. The mission will demonstrate CubeSat maneuverability, including plane change, altitude change and change in its closest approach to Earth to ensure atmospheric reentry in less than 90 days. The mission is planned for launch in fall 2017. Hall thruster technology is a type of electric propulsion. Electric propulsion uses electricity, typically from solar panels, to accelerate the propellant. Electric propulsion can accelerate propellant to 10 times higher velocities than traditional chemical propulsion systems, which significantly increases fuel efficiency. To enable the success of the propulsion subsystem, iSat will also demonstrate power management and thermal control capabilities well beyond the current state-of-the-art for spacecraft of its size. This technology is a viable primary propulsion system that can be used on small satellites ranging from about 22 pounds (10 kilograms) to more than 1,000 pounds (450 kilograms). iSat's fuel efficiency is ten times greater and its propulsion per volume is 100 times greater than current cold-gas systems and three times better than the same system operating on xenon. iSat's iodine propulsion system consists of a 200 watt (W) Hall thruster, a cathode, a tank to store solid iodine, a power processing unit (PPU) and the feed system to supply the iodine. This propulsion system is based on a 200 W Hall thruster developed by Busek Co. Inc., which was previously flown using xenon as the propellant. Several improvements have been made to the original system to include a compact PPU, targeting greater than 80 percent reduction in mass and volume of conventional PPU designs. The cathode technology is planned to enable heaterless cathode conditioning, significantly increasing total system efficiency. The feed system has been designed to

  8. Study of Biometric Identification Method Based on Naked Footprint

    Directory of Open Access Journals (Sweden)

    Raji Rafiu King

    2013-10-01

    Full Text Available The scale of deployment of biometric identity-verification systems has recently seen an enormous increase owing to the need for more secure and reliable way of identifying people. Footprint identification which can be defined as the measurement of footprint features for recognizing the identity of a user has surfaced recently. This study is based on a biometric personal identification method using static footprint features viz. friction ridge / texture and foot shape / silhouette. To begin with, naked footprints of users are captured; images then undergo pre processing followed by the extraction of two features; shape using Gradient Vector Flow (GVF) snake model and minutiae extraction respectively. Matching is then effected based on these two features followed by a fusion of these two results for either a reject or accept decision. Our shape matching feature is based on cosine similarity while the texture one is based on miniature score matching. The results from our research establish that the naked footprint is a credible biometric feature as two barefoot impressions of an individual match perfectly while that of two different persons shows a great deal of dissimilarity. Normal 0 false false false IN X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Doi: 10.12777/ijse.5.2.29-35 How to cite this article: King

  9. An urban metabolism and ecological footprint assessment of Metro Vancouver.

    Science.gov (United States)

    Moore, Jennie; Kissinger, Meidad; Rees, William E

    2013-07-30

    As the world urbanizes, the role of cities in determining sustainability outcomes grows in importance. Cities are the dominant form of human habitat, and most of the world's resources are either directly or indirectly consumed in cities. Sustainable city analysis and management requires understanding the demands a city places on a wider geographical area and its ecological resource base. We present a detailed, integrated urban metabolism of residential consumption and ecological footprint analysis of the Vancouver metropolitan region for the year 2006. Our overall goal is to demonstrate the application of a bottom-up ecological footprint analysis using an urban metabolism framework at a metropolitan, regional scale. Our specific objectives are: a) to quantify energy and material consumption using locally generated data and b) to relate these data to global ecological carrying capacity. Although water is the largest material flow through Metro Vancouver (424,860,000 m(3)), it has the smallest ecological footprint (23,100 gha). Food (2,636,850 tonnes) contributes the largest component to the ecological footprint (4,514,400 gha) which includes crop and grazing land as well as carbon sinks required to sequester emissions from food production and distribution. Transportation fuels (3,339,000 m(3)) associated with motor vehicle operation and passenger air travel comprises the second largest material flow through the region and the largest source of carbon dioxide emissions (7,577,000 tonnes). Transportation also accounts for the second largest component of the EF (2,323,200 gha). Buildings account for the largest electricity flow (17,515,150 MWh) and constitute the third largest component of the EF (1,779,240 gha). Consumables (2,400,000 tonnes) comprise the fourth largest component of the EF (1,414,440 gha). Metro Vancouver's total Ecological Footprint in 2006 was 10,071,670 gha, an area approximately 36 times larger than the region itself. The EFA reveals that

  10. Invited review: Resource inputs and land, water and carbon footprints from the production of edible protein of animal origin

    Directory of Open Access Journals (Sweden)

    G. Flachowsky

    2018-01-01

    Full Text Available The objective of this review is to analyze crucial factors in the output from the production of proteins in food of animal origin, such as milk, meat and eggs. We then consider inputs such as land, water, fuel, minerals and feed, as well as characterize emissions. Finally, we estimate footprints for land (land footprint, LF, water (water footprint, WF and greenhouse gas emissions (i.e., carbon footprint, CF during the production process. The wide range of different land and water inputs per unit feed between various studies largely influences the results. Further influencing factors are species and categories of animals that produce edible protein, their yields and the feeding of animals. Coproducts with no or low humanly edible fractions and grassland as feed contribute to a lower need for arable land and lower LF, WF and CF. The most efficient land use or the lowest LF per kilogram of edible protein was estimated for higher milk and egg yields; the highest LF values were calculated for beef, followed by pork. The lowest WF and CF were calculated for edible protein of chicken meat and eggs. Edible protein from ruminants is mostly characterized by a higher CF because of the high greenhouse gas potential of methane produced in the rumen. A key prerequisite for further progress in this field is the harmonization of data collection and calculation methods. Alternatives to partial or complete replacement of protein of terrestrial animals, such as marine animals, insects, cell cultures, single-cell proteins or simulated animal products from plants, as well as changing eating patterns and reducing food losses are mentioned as further potential ways for more efficient feed production. For all those dealing with plant or animal breeding and cultivation and all those who are working along the whole food production chain, it is a major challenge to enhance the production of more food for more people with, at the same time, less, limited resources and

  11. Carbon and energy footprint of the hydrate-based biogas upgrading process integrated with CO2 valorization.

    Science.gov (United States)

    Castellani, Beatrice; Rinaldi, Sara; Bonamente, Emanuele; Nicolini, Andrea; Rossi, Federico; Cotana, Franco

    2018-02-15

    The present paper aims at assessing the carbon and energy footprint of an energy process, in which the energy excess from intermittent renewable sources is used to produce hydrogen which reacts with the CO 2 previously separated from an innovative biogas upgrading process. The process integrates a hydrate-based biogas upgrading section and a CO 2 methanation section, to produce biomethane from the biogas enrichment and synthetic methane from the CO 2 methanation. Clathrate hydrates are crystalline compounds, formed by gas enclathrated in cages of water molecules and are applied to the selective separation of CO 2 from biogas mixtures. Data from the experimental setup were analyzed in order to evaluate the green-house gas emissions (carbon footprint CF) and the primary energy consumption (energy footprint EF) associated to the two sections of the process. The biosynthetic methane production during a single-stage process was 0.962Nm 3 , obtained mixing 0.830Nm 3 of methane-enriched biogas and 0.132Nm 3 of synthetic methane. The final volume composition was: 73.82% CH 4 , 19.47% CO 2 , 0.67% H 2 , 1.98% O 2 , 4.06% N 2 and the energy content was 28.0MJ/Nm 3 . The functional unit is the unitary amount of produced biosynthetic methane in Nm 3 . Carbon and energy footprints are 0.7081kgCO 2eq /Nm 3 and 28.55MJ/Nm 3 , respectively, when the electric energy required by the process is provided by photovoltaic panels. In this scenario, the overall energy efficiency is about 0.82, higher than the worldwide average energy efficiency for fossil methane, which is 0.75. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Trends in communications satellites

    CERN Document Server

    Curtin, Denis J

    1979-01-01

    Trends in Communications Satellites offers a comprehensive look at trends and advances in satellite communications, including experimental ones such as NASA satellites and those jointly developed by France and Germany. The economic aspects of communications satellites are also examined. This book consists of 16 chapters and begins with a discussion on the fundamentals of electrical communications and their application to space communications, including spacecraft, earth stations, and orbit and wavelength utilization. The next section demonstrates how successful commercial satellite communicati

  13. Petite Amateur Navy Satellite (PANSAT)

    Science.gov (United States)

    Sakoda, D.; Hiser, J. K.

    1989-01-01

    The Naval Postgraduate School's (NPS) Space Systems Academic Group (SSAG) is designing and developing a small communications satellite for launch aboard the shuttle as a complex autonomous payload (CAP). The objectives of PANSAT are three-fold. First, PANSAT will provide an ideal educational tool for the officer students at NPS supporting Space Systems Engineering and Space Systems Operations with hands-on hardware development. Second, the satellite will provide digital store-and-forward communications, or packet radio, for the amateur radio community. The third objective is to provide a low-cost, space-based platform for small experiments. PANSAT will be launched from the shuttle at a nominal altitude of 200 n.m. and an inclination of at least 37 degrees. The satellite weight is 150 lbs. Since there is no attitude control, eight dipole whip antennas will be used to provide isotropic ground coverage for communications. FM digital communications will be used with up-link and down-link on a single frequency in the amateur band of 437.25 MHz. A maximum 50 kHz of bandwidth is envisioned for the satellite. The expected lifetime of the satellite is 1 1/2 to 2 years before atmospheric reentry. The PANSAT design consists of the following: communications subsystem (COMM); computer, or data processor and sequencer (DP&S); power subsystem; structure subsystem; and experiment payload.

  14. Radiometric gains of satellite sensors of reflected solar radiation - Results from NASA ER-2 aircraft measurements

    Science.gov (United States)

    Abel, Peter; Galimore, Reginald; Cooper, John

    1992-01-01

    A method for using congruent aircraft-satellite observations to calibrate a satellite sensor is presented. A calibrated spectroradiometer at an altitude of 19 km above White Sands, NM, is oriented to view White Sands at the satellite overpass time along the same view vector as the satellite sensor. Collected data are transformed into corresponding estimates of sensor band radiance at the satellite (derived from the aircraft measurements), and average count (from the sensor measurements). These are both averaged across the footprint of the spectroradiometer. Results are presented for the evolution of NOAA-11 Advanced Very High Resolution Radiometer (AVHRR) (Bands 1 and 2) gain between November 1988 and October 1990, and for GOES-6 and GOES-7 VISSR/VAS visible bands during the same period. Estimates of uncertainty in the results are presented, as well as ideas for their reduction in future flights.

  15. Morphing of Building Footprints Using a Turning Angle Function

    Directory of Open Access Journals (Sweden)

    Jingzhong Li

    2017-06-01

    Full Text Available We study the problem of morphing two polygons of building footprints at two different scales. This problem frequently occurs during the continuous zooming of interactive maps. The ground plan of a building footprint on a map has orthogonal characteristics, but traditional morphing methods cannot preserve these geographic characteristics at intermediate scales. We attempt to address this issue by presenting a turning angle function-based morphing model (TAFBM that can generate polygons at an intermediate scale with an identical turning angle for each side. Thus, the orthogonal characteristics can be preserved during the entire interpolation. A case study demonstrates that the model yields good results when applied to data from a building map at various scales. During the continuous generalization, the orthogonal characteristics and their relationships with the spatial direction and topology are well preserved.

  16. Collecting a citizen's digital footprint for health data mining.

    Science.gov (United States)

    Gencoglu, Oguzhan; Simila, Heidi; Honko, Harri; Isomursu, Minna

    2015-01-01

    This paper describes a case study for collecting digital footprint data for the purpose of health data mining. The case study involved 20 subjects residing in Finland who were instructed to collect data from registries which they evaluated to be useful for understanding their health or health behaviour, current or past. 11 subjects were active, sending 100 data requests to 49 distinct organizations in total. Our results indicate that there are still practical challenges in collecting actionable digital footprint data. Our subjects received a total of 75 replies (reply rate of 75.0%) and 61 datasets (reception rate of 61%). Out of the received data, 44 datasets (72.1%) were delivered in paper format, 4 (6.6%) in portable document format and 13 (21.3%) in structured digital form. The time duration between the sending of the information requests and reception of a reply was 26.4 days on the average.

  17. Geochronology: age of Mexican ash with alleged 'footprints'.

    Science.gov (United States)

    Renne, Paul R; Feinberg, Joshua M; Waters, Michael R; Arroyo-Cabrales, Joaquin; Ochoa-Castillo, Patricia; Perez-Campa, Mario; Knight, Kim B

    2005-12-01

    A report of human footprints preserved in 40,000-year-old volcanic ash near Puebla, Mexico (http://www.royalsoc.ac.uk/exhibit.asp?id=3616&tip=1), was the subject of a press conference that stirred international media attention. If the claims (http://www.mexicanfootprints.co.uk) of Gonzalez et al. are valid, prevailing theories about the timing of human migration into the Americas would need significant revision. Here we show by 40Ar/39Ar dating and corroborating palaeomagnetic data that the basaltic tuff on which the purported footprints are found is 1.30+/-0.03 million years old. We conclude that either hominid migration into the Americas occurred very much earlier than previously believed, or that the features in question were not made by humans on recently erupted ash.

  18. Surveying the Environmental Footprint of Urban Food Consumption

    DEFF Research Database (Denmark)

    Goldstein, Benjamin Paul; Birkved, Morten; Fernandez, John

    2017-01-01

    , and electricity. Hitherto, urban food consumption has garnered scant attention both in UM accounting (typically lumped with “biomass”) and on the urban policy agenda, despite its relevance to local and global environmental pressures. With future growth expected in urban population and wealth, an accounting...... ecological footprints (average is 1.2 global hectares per capita per annum), with large deviations based on wealth, culture, and urban form. Meat and dairy are the primary drivers of both global warming and ecological footprint impacts, with little relationship between their consumption and city wealth....... The foodprint is primarily linear in form, producing significant organic exhaust from the urban system that has a strong, positive correlation to wealth. Though much of the foodprint is embodied within imported foodstuffs, cities can still implement design and policy interventions, such as improved nutrient...

  19. The footprint of urban heat island effect in China

    Science.gov (United States)

    Decheng Zhou; Shuqing Zhao; Liangxia Zhang; Ge Sun; Yongqiang Liu

    2015-01-01

    Urban heat island (UHI) is one major anthropogenic modification to the Earth system that transcends its physical boundary. Using MODIS data from 2003 to 2012, we showed that the UHI effect decayed exponentially toward rural areas for majority of the 32 Chinese cities. We found an obvious urban/ rural temperature “cliff”, and estimated that the footprint of UHI effect (...

  20. Parametric optimization of thermoelectric elements footprint for maximum power generation

    DEFF Research Database (Denmark)

    Rezania, A.; Rosendahl, Lasse; Yin, Hao

    2014-01-01

    The development studies in thermoelectric generator (TEG) systems are mostly disconnected to parametric optimization of the module components. In this study, optimum footprint ratio of n- and p-type thermoelectric (TE) elements is explored to achieve maximum power generation, maximum cost...... materials. The results, which are in good agreement with the previous computational studies, show that the maximum power generation and the maximum cost-performance in the module occur at An/Ap

  1. Footprint: Tourism Information Search based on Mixed Reality

    OpenAIRE

    Vinothini Kasinathan; Aida Mustapha; Yeap Chee Seong; Aida Zamnah Zainal Abidin

    2017-01-01

    In the quest to provide better information seeking experience during travelling, this paper is set to design, build and trial a prototype tourism information search application based on mixed reality. This paper proposes “Footprint”, an android-based tourism information search application in a mixed reality environment, whereby it overlays tourism-related information on the image that the mobile phone camera is focused at. Using Footprint, the user would only need to point the mobile phone ca...

  2. Pengaruh Paradigma Lingkungan dan Personal Value terhadap Carbon Footprint Mahasiswa

    OpenAIRE

    Malisi, Ali Sibro; Nadiroh, Nadiroh

    2017-01-01

    The objective of the research was aimed to finding the influence of environmental paradigm and personal value on environmental issues. Here, the effect of environmental paradigm and personal value on environmental using Carbon Footprint Analysis were evaluated on students at Universitas Negeri Jakarta. This research uses quantitative expost facto method with sample of 194 students. The results showed that there is influence of environmental paradigm and personal value to total carbon footprin...

  3. Improving odour assessment in LCA — the odour footprint

    DEFF Research Database (Denmark)

    Peters, Gregory M; Murphy, K R; Adamsen, Anders Peter S.

    2014-01-01

    in the life cycle assessment (LCA) community. This article aims to redress this. Results and discussion: We produced a list of 33 linear characterisation factors based on hydrogen sulphide equivalents, analogous to the linear carbon dioxide equivalency factors in use in carbon footprinting...... detection threshold, the diffusion rate and the kinetics of degradation of odourants, was implemented in MATLAB. We demonstrated the use of the characterisation factors we calculated in a case study based on odour removal technology applied to a pig barn....

  4. Limitations of Carbon Footprint as Indicator of Environmental Sustainability

    DEFF Research Database (Denmark)

    Laurent, Alexis; Olsen, Stig I.; Hauschild, Michael Z.

    2012-01-01

    Greenhouse gas accountings, commonly referred to with the popular term carbon footprints (CFP), are a widely used metric of climate change impacts and the main focus of many sustainability policies among companies and authorities. However, environmental sustainability concerns not just climate...... runs the risk of inadvertently shifting the problem to other environmental impacts when products are optimized to become more “green”. These findings call for the use of more broadly encompassing tools to assess and manage environmental sustainability....

  5. Web based tools for visualizing imaging data and development of XNATView, a zero footprint image viewer.

    Science.gov (United States)

    Gutman, David A; Dunn, William D; Cobb, Jake; Stoner, Richard M; Kalpathy-Cramer, Jayashree; Erickson, Bradley

    2014-01-01

    Advances in web technologies now allow direct visualization of imaging data sets without necessitating the download of large file sets or the installation of software. This allows centralization of file storage and facilitates image review and analysis. XNATView is a light framework recently developed in our lab to visualize DICOM images stored in The Extensible Neuroimaging Archive Toolkit (XNAT). It consists of a PyXNAT-based framework to wrap around the REST application programming interface (API) and query the data in XNAT. XNATView was developed to simplify quality assurance, help organize imaging data, and facilitate data sharing for intra- and inter-laboratory collaborations. Its zero-footprint design allows the user to connect to XNAT from a web browser, navigate through projects, experiments, and subjects, and view DICOM images with accompanying metadata all within a single viewing instance.

  6. Web based tools for visualizing imaging data and development of XNATView, a zero footprint image viewer

    Directory of Open Access Journals (Sweden)

    David A Gutman

    2014-05-01

    Full Text Available Advances in web technologies now allow direct visualization of imaging data sets without necessitating the download of large file sets or the installation of software. This allows centralization of file storage and facilitates image review and analysis. XNATView is a light framework recently developed in our lab to visualize DICOM images stored in The Extensible Neuroimaging Archive Toolkit (XNAT. It consists of a PyXNAT-based framework to wrap around the REST API and query the data in XNAT. XNATView was developed to simplify quality assurance, help organize imaging data, and facilitate data sharing for intra- and inter-laboratory collaborations. Its zero-footprint design allows the user to connect to XNAT from a web browser, navigate through projects, experiments, and subjects, and view DICOM images with accompanying metadata all within a single viewing instance.

  7. Understanding the LCA and ISO water footprint: A response to Hoekstra (2016) “A critique on the water-scarcity weighted water footprint in LCA”

    Science.gov (United States)

    Water footprinting has emerged as an important approach to assess water use related effects from consumption of goods and services. Assessment methods are proposed by two different communities, the Water Footprint Network (WFN) and the Life Cycle Assessment (LCA) community. The p...

  8. Integrating ecological, carbon and water footprint into a "footprint family" of indicators: Definition and role in tracking human pressure on the planet

    NARCIS (Netherlands)

    Galli, A.; Wiedmann, T.O.; Ercin, Ertug; Knoblauch, D.; Ewing, B.R.; Giljum, S.

    2012-01-01

    In recent years, attempts have been made to develop an integrated Footprint approach for the assessment of the environmental impacts of production and consumption. In this paper, we provide for the first time a definition of the “Footprint Family” as a suite of indicators to track human pressure on

  9. Water Footprint and Virtual Water Trade of Brazil

    Directory of Open Access Journals (Sweden)

    Vicente de Paulo R. da Silva

    2016-11-01

    Full Text Available Freshwater scarcity has increased at an alarming rate worldwide; improved water management plays a vital role in increasing food production and security. This study aims to determine the water footprint of Brazil’s national food consumption, the virtual water flows associated with international trade in the main agricultural commodities, as well as water scarcity, water self-sufficiency and water dependency per Brazilian region. While previous country studies on water footprints and virtual water trade focused on virtual water importers or water-scarce countries, this is the first study to concentrate on a water-abundant virtual water-exporting country. Besides, it is the first study establishing international virtual water trade balances per state, which is relevant given the fact that water scarcity varies across states within the country, so the origin of virtual water exports matters. The results show that the average water footprint of Brazilian food consumption is 1619 m3/person/year. Beef contributes most (21% to this total. We find a net virtual water export of 54.8 billion m3/year, mainly to Europe, which imports 41% of the gross amount of the virtual water exported from Brazil. The northeast, the region with the highest water scarcity, has a net import of virtual water. The southeast, next in terms of water scarcity, shows large virtual water exports, mainly related to the export of sugar. The north, which has the most water, does not show a high virtual water export rate.

  10. The water footprint of California's energy system, 1990-2012.

    Science.gov (United States)

    Fulton, Julian; Cooley, Heather

    2015-03-17

    California's energy and water systems are interconnected and have evolved in recent decades in response to changing conditions and policy goals. For this analysis, we use a water footprint methodology to examine water requirements of energy products consumed in California between 1990 and 2012. We combine energy production, trade, and consumption data with estimates of the blue and green water footprints of energy products. We find that while California's total annual energy consumption increased by just 2.6% during the analysis period, the amount of water required to produce that energy grew by 260%. Nearly all of the increase in California's energy-related water footprint was associated with water use in locations outside of California, where energy products that the state consumes were, and continue to be, produced. We discuss these trends and the implications for California's future energy system as it relates to climate change and expected water management challenges inside and outside the state. Our analysis shows that while California's energy policies have supported climate mitigation efforts, they have increased vulnerability to climate impacts, especially greater hydrologic uncertainty. More integrated analysis and planning are needed to ensure that climate adaptation and mitigation strategies do not work at cross purposes.

  11. Water footprint scenarios for 2050: a global analysis.

    Science.gov (United States)

    Ercin, A Ertug; Hoekstra, Arjen Y

    2014-03-01

    This study develops water footprint scenarios for 2050 based on a number of drivers of change: population growth, economic growth, production/trade pattern, consumption pattern (dietary change, bioenergy use) and technological development. The objective the study is to understand the changes in the water footprint (WF) of production and consumption for possible futures by region and to elaborate the main drivers of this change. In addition, we assess virtual water flows between the regions of the world to show dependencies of regions on water resources in other regions under different possible futures. We constructed four scenarios, along two axes, representing two key dimensions of uncertainty: globalization versus regional selfsufficiency, and economy-driven development versus development driven by social and environmental objectives. The study shows how different drivers will change the level of water consumption and pollution globally in 2050. The presented scenarios can form a basis for a further assessment of how humanity can mitigate future freshwater scarcity. We showed with this study that reducing humanity's water footprint to sustainable levels is possible even with increasing populations, provided that consumption patterns change. This study can help to guide corrective policies at both national and international levels, and to set priorities for the years ahead in order to achieve sustainable and equitable use of the world's fresh water resources. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Carbon Footprint Analysis of Municipalities – Evidence from Greece

    Directory of Open Access Journals (Sweden)

    K. Angelakoglou

    2015-11-01

    Full Text Available The economical crisis that hit Greece after 2009, significantly affected its energy consumption profile due to the increased price of domestic heating oil and gasoline. The specific study aims at the quantification of the carbon dioxide emissions in municipal level due to energy and fuel consumption. Three different municipalities in North Greece (Kavala, Alexandroupolis and Drama were assessed with the application of three different carbon footprint estimation approaches in each one of them, including two life cycle assessment methods. Results ranged from 511,799 to 571,000, 435,250 to 489,000 and 355,207 to 398,000 tons CO2 and tons CO2-eq. for Kavala, Alexandroupolis and Drama respectively. The analysis per energy type indicated the electrical energy consumption as the key factor affecting the results due to the relatively high CO2 emission coefficient of the electricity produced in Greece. The analysis per sector indicated that a percentage of nearly 75% of the total carbon footprint is assigned to the building sector whereas the private and commercial transport is accountable for the rest. Municipal activities (buildings, facilities, lighting and fleet contributed to a small percentage to the total carbon footprint (approx. 3-8%.

  13. Estimating Green Water Footprints in a Temperate Environment

    Directory of Open Access Journals (Sweden)

    Tim Hess

    2010-07-01

    Full Text Available The “green” water footprint (GWF of a product is often considered less important than the “blue” water footprint (BWF as “green” water generally has a low, or even negligible, opportunity cost. However, when considering food, fibre and tree products, is not only a useful indicator of the total appropriation of a natural resource, but from a methodological perspective, blue water footprints are frequently estimated as the residual after green water is subtracted from total crop water use. In most published studies, green water use (ETgreen has been estimated from the FAO CROPWAT model using the USDA method for effective rainfall. In this study, four methods for the estimation of the ETgreen of pasture were compared. Two were based on effective rainfall estimated from monthly rainfall and potential evapotranspiration, and two were based on a simulated water balance using long-term daily, or average monthly, weather data from 11 stations in England. The results show that the effective rainfall methods significantly underestimate the annual ETgreen in all cases, as they do not adequately account for the depletion of stored soil water during the summer. A simplified model, based on annual rainfall and reference evapotranspiration (ETo has been tested and used to map the average annual ETgreen of pasture in England.

  14. Water footprint assessment for wastewater treatment: method, indicator, and application.

    Science.gov (United States)

    Shao, Ling; Chen, G Q

    2013-07-16

    The water footprint in terms of the sum of both direct and indirect water cost of wastewater treatment is for the first time accounted in this work. On the basis of the hybrid method as a combination of process analysis and input-output analysis, a detailed water footprint accounting procedure is provided to cover the supply chain of a wastewater treatment plant. A set of indices intending to reveal the efficiency as well as renewability of wastewater treatment systems are devised as parallels of corresponding indicators in net energy analysis for energy supply systems. A case study is carried out for the Beijing Space City wastewater treatment plant as a landmark project. The high WROI (water return on investment) and low WIWP (water investment in water purified) indicate a high efficiency and renewability of the case system, illustrating the fundamental function of wastewater treatment for water reuse. The increasing of the wastewater and sludge treatment rates are revealed in an urgent need to reduce the water footprint of China and to improve the performance of wastewater treatment.

  15. High resolution production water footprints of the United States

    Science.gov (United States)

    Marston, L.; Yufei, A.; Konar, M.; Mekonnen, M.; Hoekstra, A. Y.

    2017-12-01

    The United States is the largest producer and consumer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to this economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, high-resolution database of water use by sector would provide insight into US utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the US. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the US economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking.

  16. Carbon footprint of aerobic biological treatment of winery wastewater.

    Science.gov (United States)

    Rosso, D; Bolzonella, D

    2009-01-01

    The carbon associated with wastewater and its treatment accounts for approximately 6% of the global carbon balance. Within the wastewater treatment industry, winery wastewater has a minor contribution, although it can have a major impact on wine-producing regions. Typically, winery wastewater is treated by biological processes, such as the activated sludge process. Biomass produced during treatment is usually disposed of directly, i.e. without digestion or other anaerobic processes. We applied our previously published model for carbon-footprint calculation to the areas worldwide producing yearly more than 10(6) m(3) of wine (i.e., France, Italy, Spain, California, Argentina, Australia, China, and South Africa). Datasets on wine production from the Food and Agriculture Organisation were processed and wastewater flow rates calculated with assumptions based on our previous experience. Results show that the wine production, hence the calculated wastewater flow, is reported as fairly constant in the period 2005-2007. Nevertheless, treatment process efficiency and energy-conservation may play a significant role on the overall carbon-footprint. We performed a sensitivity analysis on the efficiency of the aeration process (alphaSOTE per unit depth, or alphaSOTE/Z) in the biological treatment operations and showed significant margin for improvement. Our results show that the carbon-footprint reduction via aeration efficiency improvement is in the range of 8.1 to 12.3%.

  17. Using carbon footprint to evaluate environmental issues of food transportation

    Directory of Open Access Journals (Sweden)

    Konieczny P.

    2013-03-01

    Full Text Available Background: The international trade of food commodities is still growing and food products are transported sometimes for a long distance using  various modes. Food transportation issues should be discussed  not only in respect to quality and safety concerns but also from environmental point of view.  Numerous approaches are  proposed to study impacts of food transportation along typical food chain on environment. Carbon footprint based on seems to be an interesting indicator for such analysis.  Material and methods: The analysis carried out in this study is based mainly on data presented in paper and reports published in recent decade, including some opinions available on various internet websites.    Results and conclusions:  The greenhouse gas emissions associated food transport along whole food supply chain. Carbon footprint  can be used to study various environmental impacts on each chain stage including primary production, food processing, fuel and energy consumption in food distribution, retail issues and product use  by consumer during household consumption. Adding these together all of the greenhouse gas emissions gives the total carbon footprint for a product useful to affect consumer nutritional behaviors.  

  18. Sustainability of the city and its ecological footprint

    Directory of Open Access Journals (Sweden)

    Petrić Jasna

    2004-01-01

    Full Text Available There are some agreed sustainability indicators, even some agreed target values regarding a sustainable city, but they still have to be underpinned by empirical evidence. The common starting point of definitions is generally the destructive impact of the city on its regional and global environment which can be observed in form of the depletion of natural resources and the pollution of soil, water and air. A sustainable city is therefore generally regarded to be the one that is compact and preserves land, has mixed use to increase access and reduce need to travel, is socially and economically balanced, uses clean and renewable energy and recycles all its waste. However, the sustainable city cannot exist as a self-sufficient unit, in ignorance of relationship with its hinterland. The ecological footprint which is the amount of land required to produce resources to sustain our quality of life is a yardstick for measuring the ecological bottom line of sustainability. With a sustainable city target to relieve pressure on the countryside, there is an increasing awareness of the importance of calculating city’s ecological footprint and see how it relates to the target global average. Although problem of reducing ecological footprints primarily concerns the wealthiest countries, it has to be fully acknowledged in the less economically developed part of the world, while recognising that cities themselves provide many potential solutions.

  19. Embedded Volttron specification - benchmarking small footprint compute device for Volttron

    Energy Technology Data Exchange (ETDEWEB)

    Sanyal, Jibonananda [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Fugate, David L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Woodworth, Ken [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nutaro, James J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kuruganti, Teja [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-08-17

    An embedded system is a small footprint computing unit that typically serves a specific purpose closely associated with measurements and control of hardware devices. These units are designed for reasonable durability and operations in a wide range of operating conditions. Some embedded systems support real-time operations and can demonstrate high levels of reliability. Many have failsafe mechanisms built to handle graceful shutdown of the device in exception conditions. The available memory, processing power, and network connectivity of these devices are limited due to the nature of their specific-purpose design and intended application. Industry practice is to carefully design the software for the available hardware capability to suit desired deployment needs. Volttron is an open source agent development and deployment platform designed to enable researchers to interact with devices and appliances without having to write drivers themselves. Hosting Volttron on small footprint embeddable devices enables its demonstration for embedded use. This report details the steps required and the experience in setting up and running Volttron applications on three small footprint devices: the Intel Next Unit of Computing (NUC), the Raspberry Pi 2, and the BeagleBone Black. In addition, the report also details preliminary investigation of the execution performance of Volttron on these devices.

  20. [Research progress on water footprint in agricultural products].

    Science.gov (United States)

    Lu, Yang; Liu, Xiu-wei; Zhang, Xi-ying

    2015-10-01

    Water is one of the important resources in human activities. Scientifically and rationally evaluating the effects of human activities on water resources is important for sustainable water resource management. The innovative concepts of water footprint (WF) distinguished the human water consumption into green water, blue water and grey water which extended the evaluation methods in sustainable utilization of water resources. Concepts of WF based on virtual water (VW) and based on life cycle assessment (LCA) both combined water quality and water quantity are now the focuses in agricultural water management researches. Theory of WF based on VW includes the calculation of green, blue and grey WF as well as the evaluation of the sustainability of water environment. Theory of WF based on LCA reflects the overall impact of consumptive and degradative water use on the environment. The purpose of this article was to elaborate the research progresses in theoretical calculation methods and environmental sustainability assessment of the two water footprint theories and then to analyze the differentiation of these two methodologies in describing the consumptive water use in agriculture and its effects on environment. Finally, some future research aspects on water footprint were provided.

  1. Characteristics of the water footprint of rice production under different rainfall years in Jilin Province, China.

    Science.gov (United States)

    Li, Hongying; Qin, Lijie; He, Hongshi

    2017-11-28

    Rice is a special crop, and its production differs from that of other crops because it requires a thin layer of water coverage for a long period. The calculation of the water footprint of rice production should differ from that of other crops owing to the rice growing process. This study improved the calculation of blue and grey water footprints of rice production and analyzed the variations in the water footprints for rice production under different rainfall years in Jilin Province. In the drought year, the green water footprint was the lowest and the blue water footprint was the highest among the three years, while in the humid year, the green water footprint was the highest and the blue water footprint was not the lowest. The areas with higher water footprints were found in the east and west regions of Jilin Province, while the areas with lower water footprints were found in the middle east and middle regions of Jilin Province. Blue water was the primary water resource for rice production, although more precipitation provided the highest green water in the humid year; also, the spatial distributions of water footprints were not the same under different rainfall years. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  2. Place oriented ecological footprint analysis. The case of Israel's grain supply

    International Nuclear Information System (INIS)

    Kissinger, Meidad; Gottlieb, Dan

    2010-01-01

    In today's world, any nation's ecological footprint is spread all over the globe. Still, most footprint studies are not yet sensitive to the specific locations on which the footprint falls and to the unique production characteristics of each supporting region. In recent years some studies have acknowledged the need to quantify the 'real land' footprints and particularly the share of the footprint embodied in trade. Our goal is to analyse the ecological footprint of grain-based consumption in the state of Israel during the last two decades. We present a detailed, place oriented calculation procedure of Israel's grain footprint on specific locations around the world. We document modes of production, major energy inputs in specific sources of supply, the energy required for shipping from each source, and the CO 2 emissions from those operations. Our research reveals that most of Israel's grain footprint falls on North America followed by the Black Sea region. It also shows that while the overall consumption of grain products has increased throughout the research period, the size of the footprint has been dropping in recent years as a consequence of changing sources of supply and grain composition. Finally, we discuss some of the implications of the method presented here for future footprint calculations and environmental resource management. (author)

  3. A data-model fusion approach for upscaling gross ecosystem productivity to the landscape scale based on remote sensing and flux footprint modelling

    Directory of Open Access Journals (Sweden)

    B. Chen

    2010-09-01

    Full Text Available In order to use the global available eddy-covariance (EC flux dataset and remote-sensing measurements to provide estimates of gross primary productivity (GPP at landscape (101–102 km2, regional (103–106 km2 and global land surface scales, we developed a satellite-based GPP algorithm using LANDSAT data and an upscaling framework. The satellite-based GPP algorithm uses two improved vegetation indices (Enhanced Vegetation Index – EVI, Land Surface Water Index – LSWI. The upscalling framework involves flux footprint climatology modelling and data-model fusion. This approach was first applied to an evergreen coniferous stand in the subtropical monsoon climatic zone of south China. The EC measurements at Qian Yan Zhou tower site (26°44´48" N, 115°04´13" E, which belongs to the China flux network and the LANDSAT and MODIS imagery data for this region in 2004 were used in this study. A consecutive series of LANDSAT-like images of the surface reflectance at an 8-day interval were predicted by blending the LANDSAT and MODIS images using an existing algorithm (ESTARFM: Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model. The seasonal dynamics of GPP were then predicted by the satellite-based algorithm. MODIS products explained 60% of observed variations of GPP and underestimated the measured annual GPP (= 1879 g C m−2 by 25–30%; while the satellite-based algorithm with default static parameters explained 88% of observed variations of GPP but overestimated GPP during the growing seasonal by about 20–25%. The optimization of the satellite-based algorithm using a data-model fusion technique with the assistance of EC flux tower footprint modelling reduced the biases in daily GPP estimations from about 2.24 g C m−2 day−1 (non-optimized, ~43.5% of mean measured daily value to 1.18 g C m−2 day−1 (optimized

  4. [Ecological footprint calculation and development capacity analysis of China in 1999].

    Science.gov (United States)

    Xu, Zhongmin; Zhang, Zhiqiang; Cheng, Guodong; Chen, Dongjing

    2003-02-01

    The ecological footprint method put forward and improved by William Rees and Mathis Wackernagel presents a methodologically simple but integrated framework for national natural capital accounting, which is capable of measuring the impact of Human's consumption on ecosystem. Based on the ecological footprint theory and calculation method, a flow network analysis method was introduced to illuminate the structure of complex ecological economic system, and the relationship among ecological footprint, diversity and development capacity was analyzed. In this paper, the ecological footprints of China and its provinces was calculated and compared with the national and local ecological carrying capacity. The results showed that the ecological footprints of China and most of its provinces were beyond the available ecological capacity, and China and its most provinces run 'national or regional ecological deficit'. In case of China, the national ecological deficit was 0.645 hm2 per cap in 1999. Secondly, we introduced a flow network analysis method, taking various ecological productive area as note, and adopted Ulanowicz's development capacity formula to analyze the relationship among ecological footprint diversity, development capacity and output. The results demonstrated that Ulanowicz's development capacity was a good predictor of economic system output. At the same time, two distinct ways to change development capacity were produced. Increasing ecological footprint or increasing ecological footprint's diversity would both increase development capacity. Due to the fact that the ecological footprints had already been beyond bio-capacities, the only way to increase development capacity was to increase ecological footprint's diversity. The positive relationship between ecological footprint diversity and resources utilization efficiency demonstrated that there was no conflict between increasing ecological footprint's diversity and reducing footprints while not comprising our

  5. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2017-01-01

    The first edition of this ground breaking reference work was the most comprehensive reference source available about the key aspects of the satellite applications field. This updated second edition covers the technology, the markets, applications and regulations related to satellite telecommunications, broadcasting and networking—including civilian and military systems; precise satellite navigation and timing networks (i.e. GPS and others); remote sensing and meteorological satellite systems. Created under the auspices of the International Space University based in France, this brand new edition is now expanded to cover new innovative small satellite constellations, new commercial launching systems, innovation in military application satellites and their acquisition, updated appendices, a useful glossary and more.

  6. Small satellite product assurance

    Science.gov (United States)

    Demontlivault, J.; Cadelec, Jacques

    1993-01-01

    In order to increase the interest in small satellites, their cost must be reduced; reducing product assurance costs induced by quality requirements is a major objective. For a logical approach, small satellites are classified in three main categories: satellites for experimental operations with a short lifetime, operational satellites manufactured in small mass with long lifetime requirements, operational satellites (long lifetime required), of which only a few models are produced. The various requirements as regards the product assurance are examined for each satellite category: general requirements for space approach, reliability, electronic components, materials and processes, quality assurance, documentation, tests, and management. Ideal product assurance system integrates quality teams and engineering teams.

  7. Spatio-temporal footprints of urbanisation in Surat, the Diamond City of India (1990-2009).

    Science.gov (United States)

    Sharma, Richa; Ghosh, Aniruddha; Joshi, Pawan Kumar

    2013-04-01

    Urbanisation is a ubiquitous phenomenon with greater prominence in developing nations. Urban expansion involves land conversions from vegetated moisture-rich to impervious moisture-deficient land surfaces. The urban land transformations alter biophysical parameters in a mode that promotes development of heat islands and degrades environmental health. This study elaborates relationships among various environmental variables using remote sensing dataset to study spatio-temporal footprint of urbanisation in Surat city. Landsat Thematic Mapper satellite data were used in conjugation with geo-spatial techniques to study urbanisation and correlation among various satellite-derived biophysical parameters, [Normalised Difference Vegetation Index, Normalised Difference Built-up Index, Normalised Difference Water Index, Normalised Difference Bareness Index, Modified NDWI and land surface temperature (LST)]. Land use land cover was prepared using hierarchical decision tree classification with an accuracy of 90.4 % (kappa = 0.88) for 1990 and 85 % (kappa = 0.81) for 2009. It was found that the city has expanded over 42.75 km(2) within a decade, and these changes resulted in elevated surface temperatures. For example, transformation from vegetation to built-up has resulted in 5.5 ± 2.6 °C increase in land surface temperature, vegetation to fallow 6.7 ± 3 °C, fallow to built-up is 3.5 ± 2.9 °C and built-up to dense built-up is 5.3 ± 2.8 °C. Directional profiling for LST was done to study spatial patterns of LST in and around Surat city. Emergence of two new LST peaks for 2009 was observed in N-S and NE-SW profiles.

  8. Carbon footprint of dairy goat milk production in New Zealand.

    Science.gov (United States)

    Robertson, Kimberly; Symes, Wymond; Garnham, Malcolm

    2015-07-01

    The aim of this study was to assess the cradle-to-farm gate carbon footprint of indoor and outdoor dairy goat farming systems in New Zealand, identifying hotspots and discussing variability and methodology. Our study was based on the International Organization for Standardization standards for life cycle assessment, although only results for greenhouse gas emissions are presented. Two functional units were included: tonnes of CO2-equivalents (CO2e) per hectare (ha) and kilograms of CO2e per kilogram of fat- and protein-corrected milk (FPCM). The study covered 5 farms, 2 farming systems, and 3yr. Two methods for the calculation of enteric methane emissions were assessed. The Lassey method, as used in the New Zealand greenhouse gas inventory, provided a more robust estimate of emissions from enteric fermentation and was used in the final calculations. The alternative dry matter intake method was shown to overestimate emissions due to use of anecdotal assumptions around actual consumption of feed. Economic allocation was applied to milk and co-products. Scenario analysis was performed on the allocation method, nitrogen content of manure, manure management, and supplementary feed choice. The average carbon footprint for the indoor farms (n=3) was 11.05 t of CO2e/ha and 0.81kg of CO2e/kg of FPCM. For the outdoor farms (n=2), the average was 5.38 t of CO2e/ha and 1.03kg of CO2e/kg of FPCM. The average for all 5 farms was 8.78 t of CO2e/ha and 0.90kg of CO2e/kg of FPCM. The results showed relatively high variability due to differences in management practices between farms. The 5 farms covered 10% of the total dairy goat farms but may not be representative of an average farm. Methane from enteric fermentation was a major emission source. The use of supplementary feed was highly variable but an important contributor to the carbon footprint. Nitrous oxide can contribute up to 18% of emissions. Indoor goat farming systems produced milk with a significantly higher carbon

  9. SLAM-Aided Stem Mapping for Forest Inventory with Small-Footprint Mobile LiDAR

    Directory of Open Access Journals (Sweden)

    Jian Tang

    2015-12-01

    Full Text Available Accurately retrieving tree stem location distributions is a basic requirement for biomass estimation of forest inventory. Combining Inertial Measurement Units (IMU with Global Navigation Satellite Systems (GNSS is a commonly used positioning strategy in most Mobile Laser Scanning (MLS systems for accurate forest mapping. Coupled with a tactical or consumer grade IMU, GNSS offers a satisfactory solution in open forest environments, for which positioning accuracy better than one decimeter can be achieved. However, for such MLS systems, positioning in a mature and dense forest is still a challenging task because of the loss of GNSS signals attenuated by thick canopy. Most often laser scanning sensors in MLS systems are used for mapping and modelling rather than positioning. In this paper, we investigate a Simultaneous Localization and Mapping (SLAM-aided positioning solution with point clouds collected by a small-footprint LiDAR. Based on the field test data, we evaluate the potential of SLAM positioning and mapping in forest inventories. The results show that the positioning accuracy in the selected test field is improved by 38% compared to that of a traditional tactical grade IMU + GNSS positioning system in a mature forest environment and, as a result, we are able to produce a unambiguous tree distribution map.

  10. Satellite RNAs and Satellite Viruses of Plants.

    Science.gov (United States)

    Hu, Chung-Chi; Hsu, Yau-Heiu; Lin, Na-Sheng

    2009-12-01

    The view that satellite RNAs (satRNAs) and satellite viruses are purely molecular parasites of their cognate helper viruses has changed. The molecular mechanisms underlying the synergistic and/or antagonistic interactions among satRNAs/satellite viruses, helper viruses, and host plants are beginning to be comprehended. This review aims to summarize the recent achievements in basic and practical research, with special emphasis on the involvement of RNA silencing mechanisms in the pathogenicity, population dynamics, and, possibly, the origin(s) of these subviral agents. With further research following current trends, the comprehensive understanding of satRNAs and satellite viruses could lead to new insights into the trilateral interactions among host plants, viruses, and satellites.

  11. Water Footprint Assessment in the Agro-industry: A Case Study of Soy Sauce Production

    Science.gov (United States)

    Firda, Alfiana Aulia; Purwanto

    2018-02-01

    In terms of global water scarcity, the water footprint is an indicator of the use of water resources that given knowledge about the environmental impact of consuming a product. The sustainable use of water resources nowadays bring challenges related to the production and consumption phase of water intensive related goods such as in the agro-industry. The objective of the study was to assessment the total water footprint from soy sauce production in Grobogan Regency. The total water footprint is equal to the sum of the supply chain water footprint and the operational water footprint. The assessment is based on the production chain diagram of soy sauce production which presenting the relevant process stages from the source to the final product. The result of this research is the total water footprint of soy sauce production is 1.986,35 L/kg with fraction of green water 78,43%, blue water 21,4% and gray water 0,17%.

  12. Evolution of geminiviruses and their satellites.

    Science.gov (United States)

    Nawaz-ul-Rehman, Muhammad Shah; Fauquet, Claude M

    2009-06-18

    Geminiviruses and their satellites have circular single stranded DNA genomes, infecting many crops and weeds across the globe. To successfully invade new hosts, break host resistance, move virus particles within and between plants, geminiviruses and their satellites have evolved a coordinated network of protein interactions, showing a possible evolutionary path. Humans have played an important role in the last century to promote the emergence of many geminivirus diseases, thereby impacting their evolution. The greatest molecular diversity of geminiviruses and their satellites resides in Southeast Asia revealing a possible center of origin. This minireview leads us to a possible general grand scheme of their evolution.

  13. FDMA implementation for domestic mobile satellite systems

    Science.gov (United States)

    Wachira, Muya; Bossler, Dan; Skerry, Brian

    MSAT (the domestic mobile satellite system for North America, planned for the 1990s) is briefly described. The considerations that led to the choice of FDMA/SCPC (frequency division multiple access/single carrier per channel) as the primary access scheme for MSAT are discussed. Service requirements and practical constraints are examined. It is shown that, in a shadowed environment, FDMA leads to an efficient use of satellite power while providing good link availability. Also, because of the inherent flexibility of narrowband carrier assignments within the shared MSS (mobile satellite service) bands, FDMA can provide ample coordinated spectrum for all MSS operators.

  14. Satellite switched FDMA advanced communication technology satellite program

    Science.gov (United States)

    Atwood, S.; Higton, G. H.; Wood, K.; Kline, A.; Furiga, A.; Rausch, M.; Jan, Y.

    1982-01-01

    The satellite switched frequency division multiple access system provided a detailed system architecture that supports a point to point communication system for long haul voice, video and data traffic between small Earth terminals at Ka band frequencies at 30/20 GHz. A detailed system design is presented for the space segment, small terminal/trunking segment at network control segment for domestic traffic model A or B, each totaling 3.8 Gb/s of small terminal traffic and 6.2 Gb/s trunk traffic. The small terminal traffic (3.8 Gb/s) is emphasized, for the satellite router portion of the system design, which is a composite of thousands of Earth stations with digital traffic ranging from a single 32 Kb/s CVSD voice channel to thousands of channels containing voice, video and data with a data rate as high as 33 Mb/s. The system design concept presented, effectively optimizes a unique frequency and channelization plan for both traffic models A and B with minimum reorganization of the satellite payload transponder subsystem hardware design. The unique zoning concept allows multiple beam antennas while maximizing multiple carrier frequency reuse. Detailed hardware design estimates for an FDMA router (part of the satellite transponder subsystem) indicate a weight and dc power budget of 353 lbs, 195 watts for traffic model A and 498 lbs, 244 watts for traffic model B.

  15. GPS Satellite Simulation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The GPS satellite simulation facility consists of a GPS satellite simulator controlled by either a Silicon Graphics Origin 2000 or PC depending upon unit under test...

  16. Satellite Tags- Hawaii EEZ

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Satellite tagging was implemented in 2013. Satellite tagging is conducted using a Dan Inject air rifle and deployment arrows designed by Wildlife Computers. Two...

  17. Uma medida de sustentabilidade ambiental: pegada hídrica A measure of environmental sustainability: water footprint

    Directory of Open Access Journals (Sweden)

    Vicente de P. R. da Silva

    2013-01-01

    Full Text Available Recentemente, o conceito da pegada hídrica foi introduzido como um indicador importante de consumo de água para a humanidade. A pegada hídrica é definida como o volume total de água utilizado durante a produção de bens e serviços, bem como o consumo direto de água pelos seres humanos. A água não é consumida só diretamente mas também indiretamente, nos processos de produção. Portanto, o cálculo da pegada hídrica permite quantificar o total de água consumida ao longo da cadeia de fornecimento global. Esta revisão de literatura analisa o estado da arte da pegada hídrica desde a sua criação, no encontro internacional de especialista em comércio de água virtual realizado em dezembro de 2002 na Holanda, até os dias atuais. Os principais resultados encontrados na literatura consultada indicam consenso de que a pegada hídrica é capaz de monitorar o impacto humano sobre o meio ambiente. Além do mais, esta metodologia tem uma vasta gama de aplicações que pode ser empregada em escalas que vão desde um único produto, um processo, setor, individuo, cidades, até mesmo nações e todo o planeta.The concept of the water footprint has been recently introduced as an important indicator for human induced water consumption. The water footprint is defined as the total volume of water used during production and consumption of goods and services as well as direct water consumption by human beings. Water is not only consumed directly but also indirectly in production processes. Therefore, calculating the water footprint enables to quantify total water consumed along the whole global supply chain. This review surveys the state of the art on water footprint since the International Expert Meeting on Virtual Water Trade, held in Delft, The Netherlands, in December 2002, until current days. The major findings linked to the consulted literature indicated that the water footprint is suitable for monitoring the human impact on the environment

  18. Factors that affect the ecological footprint depending on the different income levels

    OpenAIRE

    Sheng-Tung Chen; Hui-Ting Chang

    2016-01-01

    The ecological footprint provides a method for measuring how much lands can support the consumption of the natural resources. Development and biocapacity debates revolve mainly around the factors that affect the ecological footprint and the approaches to improve the environmental quality. Therefore, we conducted the panel analysis of data for 99 countries from 1981 to 2006 to determine what factors affect the ecological footprint. The empirical results show that the effect of GDP per capita o...

  19. Dinosaur footprints in the Upper Turonian-Coniacian limestone in the Krnica Bay (NE Istria, Croatia

    Directory of Open Access Journals (Sweden)

    Alenka Mauko

    2003-06-01

    Full Text Available Three isolated footprints and one trackway that can be attributed to bipedal dinosaur, from a limestone bed in vicinity of Požara promontory, Krnica Bay, are described. According to the stratigraphic position the footprints are late Turonian to Coniacian in age.This is the first record of dinosaur remains in the Turonian-Coniacian and the youngest footprint site on the Adriatic-Dinaric Carbonate Platform described thus far.

  20. A global assessment of the Water Footprint of Farm Animal Products

    OpenAIRE

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2012-01-01

    The increase in the consumption of animal products is likely to put further pressure on the world’s freshwater resources. This paper provides a comprehensive account of the water footprint of animal products, considering different production systems and feed composition per animal type and country. Nearly one-third of the total water footprint of agriculture in the world is related to the production of animal products. The water footprint of any animal product is larger than the water footpri...

  1. Water Footprint Assessment in the Agro-industry: A Case Study of Soy Sauce Production

    OpenAIRE

    Aulia Firda Alfiana; Purwanto

    2018-01-01

    In terms of global water scarcity, the water footprint is an indicator of the use of water resources that given knowledge about the environmental impact of consuming a product. The sustainable use of water resources nowadays bring challenges related to the production and consumption phase of water intensive related goods such as in the agro-industry. The objective of the study was to assessment the total water footprint from soy sauce production in Grobogan Regency. The total water footprint ...

  2. Quantifying the human impact on water resources: a critical review of the water footprint concept

    OpenAIRE

    Chenoweth, J; Hadjikakou, M; Zoumides, C

    2014-01-01

    The water footprint is a consumption-based indicator of water use, referring to the total volume of freshwater used directly and indirectly by a nation or a company, or in the provision of a product or service. Despite widespread enthusiasm for the development and use of water footprints, some concerns have been raised about the concept and its usefulness. A variety of methodologies have been developed for water footprinting which differ with respect to how they deal with di...

  3. Mapping the energy footprint of produced water management in New Mexico

    Science.gov (United States)

    Zemlick, Katie; Kalhor, Elmira; Thomson, Bruce M.; Chermak, Janie M.; Sullivan Graham, Enid J.; Tidwell, Vincent C.

    2018-02-01

    Hydraulic fracturing (HF) and horizontal drilling have revolutionized the fossil fuel industry by enabling production from unconventional oil and gas (UOG) reserves. However, UOG development requires large volumes of water, and subsequent oil and gas production from both conventional and unconventional wells generate large volumes of produced water (PW). While PW is usually considered a waste product, its reuse may lessen demand for freshwater supplies, reduce costs for transportation and disposal, and reduce the risks for injection-induced seismicity. Whether this water is disposed of or treated and reused, both methods require significant amounts of energy. The objective of this study was to identify the primary energy demands of alternative water management strategies, and to characterize and quantify their geographic variability in four oil and gas producing basins in New Mexico using a single year of production. Results illustrate the importance of each component of each produced water management strategy in determining its total energy footprint. Based on 2015 production and water use data, the energy to extract fresh groundwater for hydraulic fracturing (34 GWh-th yr-1.) exceeds the energy that would be required if the same volume of PW were treated chemically (19 GWh-th yr-1.). In addition, the energy required to transport fresh water and dispose of PW (167 GWh-th yr-1.) is far greater than that required to move treated PW (8 GWh-th yr-1.) to a point of reuse. Furthermore, transportation distances, which contribute significantly to the total energy footprint of a given management strategy, are underestimated by nearly 50% state-wide. This indicates that reuse may be an even more energy efficient way to manage PW, even with energy-intensive treatment strategies like electrocoagulation. Reuse of PW for HF is not only more energy efficient than conventional management techniques, it also reduces both demand for scarce fresh water resources and

  4. Statistical Analyses of Satellite Cloud Object Data from CERES. Part II; Tropical Convective Cloud Objects During 1998 El Nino and Validation of the Fixed Anvil Temperature Hypothesis

    Science.gov (United States)

    Xu, Kuan-Man; Wong, Takmeng; Wielicki, Bruce a.; Parker, Lindsay; Lin, Bing; Eitzen, Zachary A.; Branson, Mark

    2006-01-01

    Characteristics of tropical deep convective cloud objects observed over the tropical Pacific during January-August 1998 are examined using the Tropical Rainfall Measuring Mission/ Clouds and the Earth s Radiant Energy System single scanner footprint (SSF) data. These characteristics include the frequencies of occurrence and statistical distributions of cloud physical properties. Their variations with cloud-object size, sea surface temperature (SST), and satellite precessing cycle are analyzed in detail. A cloud object is defined as a contiguous patch of the Earth composed of satellite footprints within a single dominant cloud-system type. It is found that statistical distributions of cloud physical properties are significantly different among three size categories of cloud objects with equivalent diameters of 100 - 150 km (small), 150 - 300 km (medium), and > 300 km (large), respectively, except for the distributions of ice particle size. The distributions for the larger-size category of cloud objects are more skewed towards high SSTs, high cloud tops, low cloud-top temperature, large ice water path, high cloud optical depth, low outgoing longwave (LW) radiation, and high albedo than the smaller-size category. As SST varied from one satellite precessing cycle to another, the changes in macrophysical properties of cloud objects over the entire tropical Pacific were small for the large-size category of cloud objects, relative to those of the small- and medium-size categories. This result suggests that the fixed anvil temperature hypothesis of Hartmann and Larson may be valid for the large-size category. Combining with the result that a higher percentage of the large-size category of cloud objects occurs during higher SST subperiods, this implies that macrophysical properties of cloud objects would be less sensitive to further warming of the climate. On the other hand, when cloud objects are classified according to SSTs where large-scale dynamics plays important roles

  5. A low-cost FMCW radar for footprint detection from a mobile platform

    Science.gov (United States)

    Boutte, David; Taylor, Paul; Hunt, Allan

    2015-05-01

    Footprint and human trail detection in rugged all-weather environments is an important and challenging problem for perimeter security, passive surveillance and reconnaissance. To address this challenge a low-cost, wideband, frequency-modulated continuous wave (FMCW) radar operating at 33.4GHz - 35.5GHz is being developed through a Department of Homeland Security Science and Technology Directorate Phase I SBIR and has been experimentally demonstrated to be capable of detecting footprints and footprint trails on unimproved roads in an experimental setting. It uses a low-cost digital signal processor (DSP) that makes important operating parameters reconfigurable and allows for frequency sweep linearization, a key technique developed to increase footprint signal-to-noise ratio (SNR). This paper discusses the design, DSP implementation and experimental results of a low-cost FMCW radar for mobile footprint detection. A technique for wideband sweep linearization is detailed along with system performance metrics and experimental results showing receive-SNR from footprint trails in sand and on unimproved dirt roads. Results from a second stepped frequency CW (SFCW) Ka-band system are also shown, verifying the ability of both systems to detect footprints and footprint trails in an experimental setting. The results show that there is sufficient receive-SNR to detect even shallow footprints (~1cm) using a radar based detection system in Ka-band. Field experimental results focus on system proof of concept from a static position with mobile results also presented highlighting necessary improvements to both systems.

  6. CARVE: L4 Gridded Footprints from WRF-STILT model, 2012-2016

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides Weather Research and Forecasting (WRF) Stochastic Time-Inverted Lagrangian Transport (STILT) Footprint data products for particle receptors...

  7. Income-carbon footprint relationships for urban and rural households of Iskandar Malaysia

    International Nuclear Information System (INIS)

    Majid, M R; Moeinzadeh, S N; Tifwa, H Y

    2014-01-01

    Iskandar Malaysia has a vision to achieve sustainable development and a low carbon society status by decreasing the amount of CO 2 emission as much as 60% by 2025. As the case is in other parts of the world, households are suspected to be a major source of carbon emission in Iskandar Malaysia. At the global level, 72% of greenhouse gas emission is a consequence of household activities, which is influenced by lifestyle. Income is the most important indicator of lifestyle and consequently may influence the amount of households' carbon footprint. The main objective of this paper is to illustrate the carbon-income relationships in Iskandar Malaysia's urban and rural areas. Data were gathered through a questionnaire survey of 420 households. The households were classified into six categories based on their residential area status. Both direct and indirect carbon footprints of respondents were calculated using a carbon footprint model. Direct carbon footprint includes domestic energy use, personal travel, flight and public transportation while indirect carbon footprint is the total secondary carbon emission measurement such as housing operations, transportation operations, food, clothes, education, cultural and recreational services. Analysis of the results shows a wide range of carbon footprint values and a significance correlation between income and carbon footprint. The carbon footprints vary in urban and rural areas, and also across different urban areas. These identified carbon footprint values can help the authority target its carbon reduction programs

  8. Income-carbon footprint relationships for urban and rural households of Iskandar Malaysia

    Science.gov (United States)

    Majid, M. R.; Moeinzadeh, S. N.; Tifwa, H. Y.

    2014-02-01

    Iskandar Malaysia has a vision to achieve sustainable development and a low carbon society status by decreasing the amount of CO2 emission as much as 60% by 2025. As the case is in other parts of the world, households are suspected to be a major source of carbon emission in Iskandar Malaysia. At the global level, 72% of greenhouse gas emission is a consequence of household activities, which is influenced by lifestyle. Income is the most important indicator of lifestyle and consequently may influence the amount of households' carbon footprint. The main objective of this paper is to illustrate the carbon-income relationships in Iskandar Malaysia's urban and rural areas. Data were gathered through a questionnaire survey of 420 households. The households were classified into six categories based on their residential area status. Both direct and indirect carbon footprints of respondents were calculated using a carbon footprint model. Direct carbon footprint includes domestic energy use, personal travel, flight and public transportation while indirect carbon footprint is the total secondary carbon emission measurement such as housing operations, transportation operations, food, clothes, education, cultural and recreational services. Analysis of the results shows a wide range of carbon footprint values and a significance correlation between income and carbon footprint. The carbon footprints vary in urban and rural areas, and also across different urban areas. These identified carbon footprint values can help the authority target its carbon reduction programs.

  9. Estimation of foot pressure from human footprint depths using 3D scanner

    Science.gov (United States)

    Wibowo, Dwi Basuki; Haryadi, Gunawan Dwi; Priambodo, Agus

    2016-03-01

    The analysis of normal and pathological variation in human foot morphology is central to several biomedical disciplines, including orthopedics, orthotic design, sports sciences, and physical anthropology, and it is also important for efficient footwear design. A classic and frequently used approach to study foot morphology is analysis of the footprint shape and footprint depth. Footprints are relatively easy to produce and to measure, and they can be preserved naturally in different soils. In this study, we need to correlate footprint depth with corresponding foot pressure of individual using 3D scanner. Several approaches are used for modeling and estimating footprint depths and foot pressures. The deepest footprint point is calculated from z max coordinate-z min coordinate and the average of foot pressure is calculated from GRF divided to foot area contact and identical with the average of footprint depth. Evaluation of footprint depth was found from importing 3D scanner file (dxf) in AutoCAD, the z-coordinates than sorted from the highest to the lowest value using Microsoft Excel to make footprinting depth in difference color. This research is only qualitatif study because doesn't use foot pressure device as comparator, and resulting the maximum pressure on calceneus is 3.02 N/cm2, lateral arch is 3.66 N/cm2, and metatarsal and hallux is 3.68 N/cm2.

  10. The Multifunctional Environmental Energy Tower: Carbon Footprint and Land Use Analysis of an Integrated Renewable Energy Plant

    Directory of Open Access Journals (Sweden)

    Emanuele Bonamente

    2015-10-01

    Full Text Available The Multifunctional Environmental Energy Tower (MEET is a single, vertical, stand-alone renewable energy plant designed to decrease the primary energy consumption from fossil fuels, to reduce greenhouse gas emissions, to maximize the energy production from renewable sources available in place and to minimize land use. A feasibility case study was performed for the city of Rome, Italy. Several technologies are exploited and integrated in a single system, including a photovoltaic plant, a geothermal plant and a biomass digester for urban organic waste and sewage sludge. In the proposed configuration, the MEET could cover more than 11% of the electric power demand and up to 3% of the space heating demand of the surrounding urban area. An LCA analysis evaluates the environmental impact in a cradle-to-grave approach for two impact categories: global warming (carbon footprint and land use (land occupation and land transformation. The functional unit is a mix of electric (49.1% and thermal (50.9% energy (kWhmix. The carbon footprint is 48.70 g CO2eq/kWhmix; the land transformation is 4.058 m2/GWhmix; and the land occupation is 969.3 m2y/GWhmix. With respect to other energy production technologies, the carbon footprint is lower and similar to the best-performing ones (e.g., co-generation from wood chips; both of the land use indicators are considerably smaller than the least-impacting technologies. A systematic study was finally performed, and possible optimizations of the original design are proposed. Thanks to the modular design, the conceptual idea can be easily applied to other urban and non-urban scenarios.

  11. Future Directions of Structural Mass Spectrometry using Hydroxyl Radical Footprinting

    Energy Technology Data Exchange (ETDEWEB)

    J Kiselar; M Chance

    2011-12-31

    Hydroxyl radical protein footprinting coupled to mass spectrometry has been developed over the last decade and has matured to a powerful method for analyzing protein structure and dynamics. It has been successfully applied in the analysis of protein structure, protein folding, protein dynamics, and protein-protein and protein-DNA interactions. Using synchrotron radiolysis, exposure of proteins to a 'white' X-ray beam for milliseconds provides sufficient oxidative modification to surface amino acid side chains, which can be easily detected and quantified by mass spectrometry. Thus, conformational changes in proteins or protein complexes can be examined using a time-resolved approach, which would be a valuable method for the study of macromolecular dynamics. In this review, we describe a new application of hydroxyl radical protein footprinting to probe the time evolution of the calcium-dependent conformational changes of gelsolin on the millisecond timescale. The data suggest a cooperative transition as multiple sites in different molecular subdomains have similar rates of conformational change. These findings demonstrate that time-resolved protein footprinting is suitable for studies of protein dynamics that occur over periods ranging from milliseconds to seconds. In this review, we also show how the structural resolution and sensitivity of the technology can be improved as well. The hydroxyl radical varies in its reactivity to different side chains by over two orders of magnitude, thus oxidation of amino acid side chains of lower reactivity are more rarely observed in such experiments. Here we demonstrate that the selected reaction monitoring (SRM)-based method can be utilized for quantification of oxidized species, improving the signal-to-noise ratio. This expansion of the set of oxidized residues of lower reactivity will improve the overall structural resolution of the technique. This approach is also suggested as a basis for developing hypothesis

  12. Blue and grey water footprint of textile industry in China.

    Science.gov (United States)

    Wang, Laili; Ding, Xuemei; Wu, Xiongying

    2013-01-01

    Water footprint (WF) is a newly developed idea that indicates impacts of freshwater appropriation and wastewater discharge. The textile industry is one of the oldest, longest and most complicated industrial chains in the world's manufacturing industries. However, the textile industry is also water intensive. In this paper, we applied a bottom-up approach to estimate the direct blue water footprint (WFdir,blue) and direct grey water footprint (WFdir,grey) of China's textile industry at sector level based on WF methodology. The results showed that WFdir,blue of China's textile industry had an increasing trend from 2001 to 2010. The annual WFdir,blue surpassed 0.92 Gm(3)/yr (giga cubic meter a year) since 2004 and rose to peak value of 1.09 Gm(3)/yr in 2007. The original and residuary WFdir,grey (both were calculated based on the concentration of chemical oxygen demand (CODCr)) of China's textile industry had a similar variation trend with that of WFdir,blue. Among the three sub-sectors of China's textile industry, the manufacture of textiles sector's annual WFdir,blue and WFdir,grey were much larger than those of the manufacture of textile wearing apparel, footware and caps sector and the manufacture of chemical fibers sector. The intensities of WFdir,blue and WF(res)dir,grey of China's textile industry were year by year decreasing through the efforts of issuing restriction policies on freshwater use and wastewater generation and discharge, and popularization of water saving and wastewater treatment technologies.

  13. The carbon footprint of behavioural support services for smoking cessation.

    Science.gov (United States)

    Smith, Anna Jo Bodurtha; Tennison, Imogen; Roberts, Ian; Cairns, John; Free, Caroline

    2013-09-01

    To estimate the carbon footprint of behavioural support services for smoking cessation: text message support, telephone counselling, group counselling and individual counselling. Carbon footprint analysis. Publicly available data on National Health Service Stop Smoking Services and per unit carbon emissions; published effectiveness data from the txt2stop trial and systematic reviews of smoking cessation services. Carbon dioxide equivalents (CO2e) per 1000 smokers, per lifetime quitter, and per quality-adjusted life year gained, and cost-effectiveness, including social cost of carbon, of smoking cessation services. Emissions per 1000 participants were 8143 kg CO2e for text message support, 8619 kg CO2e for telephone counselling, 16 114 kg CO2e for group counselling and 16 372 kg CO2e for individual counselling. Emissions per intervention lifetime quitter were 636 (95% CI 455 to 958) kg CO2e for text message support, 1051 (95% CI 560 to 2873) kg CO2e for telephone counselling, 1143 (95% CI 695 to 2270) kg CO2e for group counselling and 2823 (95% CI 1688 to 6549) kg CO2e for individual counselling. Text message, telephone and group counselling remained cost-effective when cost-effectiveness analysis was revised to include the environmental and economic cost of damage from carbon emissions. All smoking cessation services had low emissions compared to the health gains produced. Text message support had the lowest emissions of the services evaluated. Smoking cessation services have small carbon footprints and were cost-effective after accounting for the societal costs of greenhouse gas emissions.

  14. STABILITY OF SATELLITES IN CLOSELY PACKED PLANETARY SYSTEMS

    International Nuclear Information System (INIS)

    Payne, Matthew J.; Holman, Matthew J.; Deck, Katherine M.; Perets, Hagai B.

    2013-01-01

    We perform numerical integrations of four-body (star, planet, planet, satellite) systems to investigate the stability of satellites in planetary systems with tightly packed inner planets (STIPs). We find that the majority of closely spaced stable two-planet systems can stably support satellites across a range of parameter-space which is only slightly decreased compared to that seen for the single-planet case. In particular, circular prograde satellites remain stable out to ∼0.4 R H (where R H is the Hill radius) as opposed to 0.5 R H in the single-planet case. A similarly small restriction in the stable parameter-space for retrograde satellites is observed, where planetary close approaches in the range 2.5-4.5 mutual Hill radii destabilize most satellites orbits only if a ∼ 0.65 R H . In very close planetary pairs (e.g., the 12:11 resonance) the addition of a satellite frequently destabilizes the entire system, causing extreme close approaches and the loss of satellites over a range of circumplanetary semi-major axes. The majority of systems investigated stably harbored satellites over a wide parameter-space, suggesting that STIPs can generally offer a dynamically stable home for satellites, albeit with a slightly smaller stable parameter-space than the single-planet case. As we demonstrate that multi-planet systems are not a priori poor candidates for hosting satellites, future measurements of satellite occurrence rates in multi-planet systems versus single-planet systems could be used to constrain either satellite formation or past periods of strong dynamical interaction between planets

  15. Estimating Biofuel Feedstock Water Footprints Using System Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Inman, Daniel; Warner, Ethan; Stright, Dana; Macknick, Jordan; Peck, Corey

    2016-07-01

    Increased biofuel production has prompted concerns about the environmental tradeoffs of biofuels compared to petroleum-based fuels. Biofuel production in general, and feedstock production in particular, is under increased scrutiny. Water footprinting (measuring direct and indirect water use) has been proposed as one measure to evaluate water use in the context of concerns about depleting rural water supplies through activities such as irrigation for large-scale agriculture. Water footprinting literature has often been limited in one or more key aspects: complete assessment across multiple water stocks (e.g., vadose zone, surface, and ground water stocks), geographical resolution of data, consistent representation of many feedstocks, and flexibility to perform scenario analysis. We developed a model called BioSpatial H2O using a system dynamics modeling and database framework. BioSpatial H2O could be used to consistently evaluate the complete water footprints of multiple biomass feedstocks at high geospatial resolutions. BioSpatial H2O has the flexibility to perform simultaneous scenario analysis of current and potential future crops under alternative yield and climate conditions. In this proof-of-concept paper, we modeled corn grain (Zea mays L.) and soybeans (Glycine max) under current conditions as illustrative results. BioSpatial H2O links to a unique database that houses annual spatially explicit climate, soil, and plant physiological data. Parameters from the database are used as inputs to our system dynamics model for estimating annual crop water requirements using daily time steps. Based on our review of the literature, estimated green water footprints are comparable to other modeled results, suggesting that BioSpatial H2O is computationally sound for future scenario analysis. Our modeling framework builds on previous water use analyses to provide a platform for scenario-based assessment. BioSpatial H2O's system dynamics is a flexible and user

  16. Carbon footprint of liquid biofuels - BioCarF

    Energy Technology Data Exchange (ETDEWEB)

    Soukka, R.; Luoranen, M.; Uusitalo, V.; Vaeisaenen, S. (Lappeenranta Univ. of Technology (Finland), LUT Energy-Environmental technology), e-mail: mika.luoranen@lut.fi

    2011-11-15

    The goal of this project is to find out the most potential raw materials and production technologies for such traffic biofuels whose properties are similar to used fuels. The different options are compared from a life cycle point of view. The goal is to find out information about greenhouse gas emissions and effects on carbon footprint in traffic sector with different biofuel production chains. In addition to this the greenhouse gas reductions with liquid fuels are compared to other biofuels for example to biogas. (orig.)

  17. IMPLICATIONS OF ECOLOGICAL FOOTPRINT VALUES FOR SELECTED EU MEMBERS

    Directory of Open Access Journals (Sweden)

    Mircea Saveanu

    2013-12-01

    Full Text Available We analyse the state of the environment for 24 EU member states, using the concept of ecological footprint. Findings suggest that 20 of the 24 analysed states are pushing their environment past its yearly regenerative limits. Of these, 10 have surpassed this value by at least two-fold. A few outliers have gone well beyond even this mark. Four member states have yet to reach the regenerative limit of their lands, and could thusly be viewed as faring better, in terms of the health of their environment. The mechanism that allows overtly ecologicaly unsustainable countries to thrive is discussed.

  18. An astronaut footprint on the surface of the Moon

    Science.gov (United States)

    1969-01-01

    View of Astronaut footprint in lunar soil. Apollo 11 Astronauts Neil A. Armstrong, Michael Collins and Edwin E. Aldrin Jr. were launched to the Moon by a Saturn V launch vehicle 9:32 a.m. EDT, July 16, 1969, from Complex 39A, Kennedy Space Center, Florida. Armstrong and Aldrin landed on the Moon July 20, 1969, and, after take-off from the Moon July 21, joined Collins in the Command Module circling the Moon. The astronauts splashed down in the Pacific Ocean and recovery was made by the U.S.S. Hornet at 12:50 p.m. EDT, July 24, 1969.

  19. Water Use and Quality Footprints of Biofuel Crops in Florida

    Science.gov (United States)

    Shukla, S.; Hendricks, G.; Helsel, Z.; Knowles, J.

    2013-12-01

    The use of biofuel crops for future energy needs will require considerable amounts of water inputs. Favorable growing conditions for large scale biofuel production exist in the sub-tropical environment of South Florida. However, large-scale land use change associated with biofuel crops is likely to affect the quantity and quality of water within the region. South Florida's surface and ground water resources are already stressed by current allocations. Limited data exists to allocate water for growing the energy crops as well as evaluate the accompanying hydrologic and water quality impacts of large-scale land use changes. A three-year study was conducted to evaluate the water supply and quality impacts of three energy crops: sugarcane, switchgrass, and sweet sorghum (with a winter crop). Six lysimeters were used to collect the data needed to quantify crop evapotranspiration (ETc), and nitrogen (N) and phosphorus (P) levels in groundwater and discharge (drainage and runoff). Each lysimeter (4.85 x 3.65 x 1.35 m) was equipped to measure water input, output, and storage. The irrigation, runoff, and drainage volumes were measured using flow meters. Groundwater samples were collected bi-weekly and drainage/runoff sampling was event based; samples were analyzed for nitrogen (N) and phosphorous (P) species. Data collected over the three years revealed that the average annual ETc was highest for sugarcane (1464 mm) followed by switchgrass and sweet sorghum. Sweet sorghum had the highest total N (TN) concentration (7.6 mg/L) in groundwater and TN load (36 kg/ha) in discharge. However, sweet sorghum had the lowest total P (TP) concentration (1.2 mg/L) in groundwater and TP load (9 kg/ha) in discharge. Water use footprint for ethanol (liter of water used per liter of ethanol produced) was lowest for sugarcane and highest for switchgrass. Switchgrass had the highest P-load footprint for ethanol. No differences were observed for the TN load footprint for ethanol. This is the

  20. The green, blue and grey water footprint of crops and derived crop products

    Science.gov (United States)

    Mekonnen, M. M.; Hoekstra, A. Y.

    2011-05-01

    This study quantifies the green, blue and grey water footprint of global crop production in a spatially-explicit way for the period 1996-2005. The assessment improves upon earlier research by taking a high-resolution approach, estimating the water footprint of 126 crops at a 5 by 5 arc minute grid. We have used a grid-based dynamic water balance model to calculate crop water use over time, with a time step of one day. The model takes into account the daily soil water balance and climatic conditions for each grid cell. In addition, the water pollution associated with the use of nitrogen fertilizer in crop production is estimated for each grid cell. The crop evapotranspiration of additional 20 minor crops is calculated with the CROPWAT model. In addition, we have calculated the water footprint of more than two hundred derived crop products, including various flours, beverages, fibres and biofuels. We have used the water footprint assessment framework as in the guideline of the Water Footprint Network. Considering the water footprints of primary crops, we see that the global average water footprint per ton of crop increases from sugar crops (roughly 200 m3 ton-1), vegetables (300 m3 ton-1), roots and tubers (400 m3 ton-1), fruits (1000 m3 ton-1), cereals (1600 m3 ton-1), oil crops (2400 m3 ton-1) to pulses (4000 m3 ton-1). The water footprint varies, however, across different crops per crop category and per production region as well. Besides, if one considers the water footprint per kcal, the picture changes as well. When considered per ton of product, commodities with relatively large water footprints are: coffee, tea, cocoa, tobacco, spices, nuts, rubber and fibres. The analysis of water footprints of different biofuels shows that bio-ethanol has a lower water footprint (in m3 GJ-1) than biodiesel, which supports earlier analyses. The crop used matters significantly as well: the global average water footprint of bio-ethanol based on sugar beet amounts to 51 m3 GJ-1

  1. Theory of geostationary satellites

    CERN Document Server

    Zee, Chong-Hung

    1989-01-01

    Geostationary or equatorial synchronous satellites are a daily reminder of our space efforts during the past two decades. The nightly television satellite weather picture, the intercontinental telecommunications of television transmissions and telephone conversations, and the establishrnent of educational programs in remote regions on Earth are constant reminders of the presence of these satellites. As used here, the term 'geo­ stationary' must be taken loosely because, in the long run, the satellites will not remain 'stationary' with respect to an Earth-fixed reference frame. This results from the fact that these satellites, as is true for all satellites, are incessantly subject to perturbations other than the central-body attraction of the Earth. Among the more predominant pertur­ bations are: the ellipticity of the Earth's equator, the Sun and Moon, and solar radiation pressure. Higher harmonics of the Earth's potential and tidal effects also influence satellite motion, but they are of second­ order whe...

  2. Meteorological satellite systems

    CERN Document Server

    Tan, Su-Yin

    2014-01-01

    “Meteorological Satellite Systems” is a primer on weather satellites and their Earth applications. This book reviews historic developments and recent technological advancements in GEO and polar orbiting meteorological satellites. It explores the evolution of these remote sensing technologies and their capabilities to monitor short- and long-term changes in weather patterns in response to climate change. Satellites developed by various countries, such as U.S. meteorological satellites, EUMETSAT, and Russian, Chinese, Japanese and Indian satellite platforms are reviewed. This book also discusses international efforts to coordinate meteorological remote sensing data collection and sharing. This title provides a ready and quick reference for information about meteorological satellites. It serves as a useful tool for a broad audience that includes students, academics, private consultants, engineers, scientists, and teachers.

  3. The multiplicity and anisotropy of galactic satellite accretion

    Science.gov (United States)

    Shao, Shi; Cautun, Marius; Frenk, Carlos S.; Grand, Robert J. J.; Gómez, Facundo A.; Marinacci, Federico; Simpson, Christine M.

    2018-02-01

    We study the incidence of group and filamentary dwarf galaxy accretion into Milky Way (MW) mass haloes using two types of hydrodynamical simulations: EAGLE, which resolves a large cosmological volume, and the AURIGA suite, which are very high resolution zoom-in simulations of individual MW-sized haloes. The present-day 11 most massive satellites are predominantly (75%) accreted in single events, 14% in pairs and 6% in triplets, with higher group multiplicities being unlikely. Group accretion becomes more common for fainter satellites, with 60% of the top 50 satellites accreted singly, 12% in pairs, and 28% in richer groups. A group similar in stellar mass to the Large Magellanic Cloud (LMC) would bring on average 15 members with stellar mass larger than 10^4{ M_\\odot}. Half of the top 11 satellites are accreted along the two richest filaments. The accretion of dwarf galaxies is highly anisotropic, taking place preferentially perpendicular to the halo minor axis, and, within this plane, preferentially along the halo major axis. The satellite entry points tend to be aligned with the present-day central galaxy disc and satellite plane, but to a lesser extent than with the halo shape. Dwarfs accreted in groups or along the richest filament have entry points that show an even larger degree of alignment with the host halo than the full satellite population. We also find that having most satellites accreted as a single group or along a single filament is unlikely to explain the MW disc of satellites.

  4. Preservation and analysis of footprint evidence within the archaeological record: examples from Valsequillo and Cuatrocienegas, Mexico.

    Science.gov (United States)

    Bennett, M.; Huddart, D.; Gonzalez, S.

    2008-05-01

    Human footprints provide a direct record of human occupation and can be used to make a range of biometric inferences about the individuals which left them. In this paper we describe the application of three-dimensional optical laser scanning in the preservation and analysis both human and animal footprints. Optical laser scanning provides a digital elevation model of a print or surface with a vertical accuracy typically less than + 0.01 mm. Not only does this provide a procedure for recording fragile footprint evidence but allows digital measurements to be made. It is also possible to use the techniques developed for rapid proto-typing to recreate the print as solid models for visualisation. The role of optical laser scanning in the preservation of footprint evidence is explored with specific reference to the controversial footprints of the Valsequillo Basin in Central Mexico which may provide some of the earliest evidence of human colonization of the Americas. More importantly, digital footprint scans provide a basis for the numerical analysis of footprints allowing the tools of geometric morphometrics to be applied. These tools have been widely developed in the fields of biology and physical anthropology and used to explore the anatomical significance of shape. One key question that can be addressed using this approach is to develop a statistical approach to the objective recognition of a human footprint thereby helping to verify their interpretation and archaeological significance. Using footprint data from sites across the World a statistical model for the recognition of human footprints is presented and used to evaluate the controversial footprint site of Valsequillo, (Puebla State) preserved in volcanic ash and those in the Cuatrocienegas Basin, (Coahuila State) preserved in travertine.

  5. Population-based geographic access to parent and satellite National Cancer Institute Cancer Center Facilities.

    Science.gov (United States)

    Onega, Tracy; Alford-Teaster, Jennifer; Wang, Fahui

    2017-09-01

    Satellite facilities of National Cancer Institute (NCI) cancer centers have expanded their regional footprints. This study characterized geographic access to parent and satellite NCI cancer center facilities nationally overall and by sociodemographics. Parent and satellite NCI cancer center facilities, which were geocoded in ArcGIS, were ascertained. Travel times from every census tract in the continental United States and Hawaii to the nearest parent and satellite facilities were calculated. Census-based population attributes were used to characterize measures of geographic access for sociodemographic groups. From the 62 NCI cancer centers providing clinical care in 2014, 76 unique parent locations and 211 satellite locations were mapped. The overall proportion of the population within 60 minutes of a facility was 22% for parent facilities and 32.7% for satellite facilities. When satellites were included for potential access, the proportion of some racial groups for which a satellite was the closest NCI cancer center facility increased notably (Native Americans, 22.6% with parent facilities and 39.7% with satellite facilities; whites, 34.8% with parent facilities and 50.3% with satellite facilities; and Asians, 40.0% with parent facilities and 54.0% with satellite facilities), with less marked increases for Hispanic and black populations. Rural populations of all categories had dramatically low proportions living within 60 minutes of an NCI cancer center facility of any type (1.0%-6.6%). Approximately 14% of the population (n = 43,033,310) lived more than 180 minutes from a parent or satellite facility, and most of these individuals were Native Americans and/or rural residents (37% of Native Americans and 41.7% of isolated rural residents). Racial/ethnic and rural populations showed markedly improved geographic access to NCI cancer center care when satellite facilities were included. Cancer 2017;123:3305-11. © 2017 American Cancer Society. © 2017 American

  6. Water footprint of U.S. transportation fuels.

    Science.gov (United States)

    Scown, Corinne D; Horvath, Arpad; McKone, Thomas E

    2011-04-01

    In the modern global economy, water and energy are fundamentally connected. Water already plays a major role in electricity generation and, with biofuels and electricity poised to gain a significant share of the transportation fuel market, water will become significantly more important for transportation energy as well. This research provides insight into the potential changes in water use resulting from increased biofuel or electricity production for transportation energy, as well as the greenhouse gas and freshwater implications. It is shown that when characterizing the water impact of transportation energy, incorporating indirect water use and defensible allocation techniques have a major impact on the final results, with anywhere between an 82% increase and a 250% decrease in the water footprint if evaporative losses from hydroelectric power are excluded. The greenhouse gas impact results indicate that placing cellulosic biorefineries in areas where water must be supplied using alternative means, such as desalination, wastewater recycling, or importation can increase the fuel's total greenhouse gas footprint by up to 47%. The results also show that the production of ethanol and petroleum fuels burden already overpumped aquifers, whereas electricity production is far less dependent on groundwater.

  7. The water footprint of Austria for different diets.

    Science.gov (United States)

    Vanham, D

    2013-01-01

    This paper analyses the Austrian water footprint of consumption (WF(cons)) for different diets: the current diet, a healthy diet (based upon the dietary recommendations issued by the German nutrition society, or DGE), a vegetarian diet and a combined diet between both latter diets. As in many western countries, the current Austrian diet consists of too many products from the groups sugar, crop oils, meat, animal fats, milk, milk products and eggs and not enough products from the groups cereals, rice, potatoes, vegetables and fruit. Especially the consumption of animal products accounts for high WF amounts. These diets result in a substantial reduction (range 922-1,362 l per capita per day (lcd)) of the WF(cons) for agricultural products, which is currently 3,655 lcd. However, the Austrian water footprint of agricultural production (WF(prod) = 2,066 lcd) still remains lower than even the WF(cons) for a vegetarian diet (2,293 lcd). As a result the country is a net virtual water importer regarding agricultural products for all analysed scenarios.

  8. Water footprints of cities - indicators for sustainable consumption and production

    Science.gov (United States)

    Hoff, H.; Döll, P.; Fader, M.; Gerten, D.; Hauser, S.; Siebert, S.

    2014-01-01

    Water footprints have been proposed as sustainability indicators, relating the consumption of goods like food to the amount of water necessary for their production and the impacts of that water use in the source regions. We further developed the existing water footprint methodology, by globally resolving virtual water flows from production to consumption regions for major food crops at 5 arcmin spatial resolution. We distinguished domestic and international flows, and assessed local impacts of export production. Applying this method to three exemplary cities, Berlin, Delhi and Lagos, we find major differences in amounts, composition, and origin of green and blue virtual water imports, due to differences in diets, trade integration and crop water productivities in the source regions. While almost all of Delhi's and Lagos' virtual water imports are of domestic origin, Berlin on average imports from more than 4000 km distance, in particular soy (livestock feed), coffee and cocoa. While 42% of Delhi's virtual water imports are blue water based, the fractions for Berlin and Lagos are 2 and 0.5%, respectively, roughly equal to the water volumes abstracted in these two cities for domestic water use. Some of the external source regions of Berlin's virtual water imports appear to be critically water scarce and/or food insecure. However, for deriving recommendations on sustainable consumption and trade, further analysis of context-specific costs and benefits associated with export production will be required.

  9. Carbon nanotube transistors scaled to a 40-nanometer footprint.

    Science.gov (United States)

    Cao, Qing; Tersoff, Jerry; Farmer, Damon B; Zhu, Yu; Han, Shu-Jen

    2017-06-30

    The International Technology Roadmap for Semiconductors challenges the device research community to reduce the transistor footprint containing all components to 40 nanometers within the next decade. We report on a p-channel transistor scaled to such an extremely small dimension. Built on one semiconducting carbon nanotube, it occupies less than half the space of leading silicon technologies, while delivering a significantly higher pitch-normalized current density-above 0.9 milliampere per micrometer at a low supply voltage of 0.5 volts with a subthreshold swing of 85 millivolts per decade. Furthermore, we show transistors with the same small footprint built on actual high-density arrays of such nanotubes that deliver higher current than that of the best-competing silicon devices under the same overdrive, without any normalization. We achieve this using low-resistance end-bonded contacts, a high-purity semiconducting carbon nanotube source, and self-assembly to pack nanotubes into full surface-coverage aligned arrays. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

  10. Measuring Carbon Footprint of Flexible Pavement Construction Project in Indonesia

    Science.gov (United States)

    Hatmoko, Jati Utomo Dwi; Hidayat, Arif; Setiawati, Apsari; Prasetyo, Stefanus Catur Adi

    2018-02-01

    Road infrastructure in Indonesia is mainly dominated by flexible pavement type. Its construction process, however, has raised concerns in terms of its environment impacts. This study aims to track and measure the carbon footprint of flexible pavement. The objectives are to map the construction process in relation to greenhouse gas (GHG) emissions, to quantify them in terms of carbon dioxide equivalents (CO2e) as generated by the process of production and transportation of raw materials, and the operation of plant off-site and on-site project. Data collection was done by having site observations and interviews with project stakeholders. The results show a total emissions of 70.888 tonnes CO2e, consisting of 34.248 tonnes CO2e (48.31%) off-site activities and 36.640 tonnes CO2e (51.687%) on-site activities. The two highest CO2e emissions were generated by the use of plant for asphalt concrete laying activities accounted 34.827 tonnes CO2e (49.130%), and material transportation accounted 24.921 (35.155%). These findings provide a new perspective of the carbon footprint in flexible pavement and suggest the urgent need for the use of more efficient and environmentally friendly plant in construction process as it shows the most significant contribution on the CO2e. This study provides valuable understanding on the environmental impact of typical flexible pavement projects in Indonesia, and further can be used for developing green road framework.

  11. Hydrocarbon footprints as a record of bumblebee flower visitation.

    Science.gov (United States)

    Witjes, Sebastian; Eltz, Thomas

    2009-11-01

    Bumblebees leave traces of cuticular hydrocarbons on flowers they visit, with the amount deposited being positively related to the number of visits. We asked whether such footprint hydrocarbons are retained on flowers for sufficiently long periods of time so as to reflect bee visitation in pollination studies. In laboratory experiments, flower corollae (Primula veris, Digitalis grandiflora) visited by Bombus terrestris workers retained bee-derived nonacosenes (C(29)H(58)) in near-unchanged quantities for 24 hours, both at 15 and 25 degrees C. Additionally, synthetic (Z)-9-tricosene applied to flower corollae of the deadnettle Lamium maculatum was retained for 48 hours in an unchanged quantity. In a field survey, the amount of footprint alkenes on flowers of comfrey (Symphytum officinale) plants was positively correlated with the number of bumblebee visits that those plants had received during the day. Together, these data suggest that flowers retain a long-term quantitative record of bumblebee visitation. The analysis of petal extracts by gas chromatography could provide a cheap and reliable way of quantifying bumblebee visits in landscape scale studies of pollination.

  12. Limitations of carbon footprint as indicator of environmental sustainability.

    Science.gov (United States)

    Laurent, Alexis; Olsen, Stig I; Hauschild, Michael Z

    2012-04-03

    Greenhouse gas accountings, commonly referred to with the popular term carbon footprints (CFP), are a widely used metric of climate change impacts and the main focus of many sustainability policies among companies and authorities. However, environmental sustainability concerns not just climate change but also other environmental problems, like chemical pollution or depletion of natural resources, and the focus on CFP brings the risk of problem shifting when reductions in CFP are obtained at the expense of increase in other environmental impacts. But how real is this risk? Here, we model and analyze the life cycle impacts from about 4000 different products, technologies, and services taken from several sectors, including energy generation, transportation, material production, infrastructure, and waste management. By investigating the correlations between the CFP and 13 other impact scores, we show that some environmental impacts, notably those related to emissions of toxic substances, often do not covary with climate change impacts. In such situations, carbon footprint is a poor representative of the environmental burden of products, and environmental management focused exclusively on CFP runs the risk of inadvertently shifting the problem to other environmental impacts when products are optimized to become more "green". These findings call for the use of more broadly encompassing tools to assess and manage environmental sustainability.

  13. Satellite-Based Quantum Communications

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Richard J [Los Alamos National Laboratory; Nordholt, Jane E [Los Alamos National Laboratory; McCabe, Kevin P [Los Alamos National Laboratory; Newell, Raymond T [Los Alamos National Laboratory; Peterson, Charles G [Los Alamos National Laboratory

    2010-09-20

    Single-photon quantum communications (QC) offers the attractive feature of 'future proof', forward security rooted in the laws of quantum physics. Ground based quantum key distribution (QKD) experiments in optical fiber have attained transmission ranges in excess of 200km, but for larger distances we proposed a methodology for satellite-based QC. Over the past decade we have devised solutions to the technical challenges to satellite-to-ground QC, and we now have a clear concept for how space-based QC could be performed and potentially utilized within a trusted QKD network architecture. Functioning as a trusted QKD node, a QC satellite ('QC-sat') could deliver secret keys to the key stores of ground-based trusted QKD network nodes, to each of which multiple users are connected by optical fiber or free-space QC. A QC-sat could thereby extend quantum-secured connectivity to geographically disjoint domains, separated by continental or inter-continental distances. In this paper we describe our system concept that makes QC feasible with low-earth orbit (LEO) QC-sats (200-km-2,000-km altitude orbits), and the results of link modeling of expected performance. Using the architecture that we have developed, LEO satellite-to-ground QKD will be feasible with secret bit yields of several hundred 256-bit AES keys per contact. With multiple ground sites separated by {approx} 100km, mitigation of cloudiness over any single ground site would be possible, potentially allowing multiple contact opportunities each day. The essential next step is an experimental QC-sat. A number of LEO-platforms would be suitable, ranging from a dedicated, three-axis stabilized small satellite, to a secondary experiment on an imaging satellite. to the ISS. With one or more QC-sats, low-latency quantum-secured communications could then be provided to ground-based users on a global scale. Air-to-ground QC would also be possible.

  14. Isolation, Culture, Functional Assays, and Immunofluorescence of Myofiber-Associated Satellite Cells.

    Science.gov (United States)

    Vogler, Thomas O; Gadek, Katherine E; Cadwallader, Adam B; Elston, Tiffany L; Olwin, Bradley B

    2016-01-01

    Adult skeletal muscle stem cells, termed satellite cells, regenerate and repair the functional contractile cells in adult skeletal muscle called myofibers. Satellite cells reside in a niche between the basal lamina and sarcolemma of myofibers. Isolating single myofibers and their associated satellite cells provides a culture system that partially mimics the in vivo environment. We describe methods for isolating and culturing intact individual myofibers and their associated satellite cells from the mouse extensor digitorum longus muscle. Following dissection and isolation of individual myofibers we provide protocols for myofiber transplantation, satellite cell transfection, immune detection of satellite cell antigens, and assays to examine satellite cell self-renewal and proliferation.

  15. The green, blue and grey water footprint of crops and derived crops products

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2011-01-01

    This study quantifies the green, blue and grey water footprint of global crop production in a spatially-explicit way for the period 1996-2005. The assessment is global and improves upon earlier research by taking a highresolution approach, estimating the water footprint of 126 crops at a 5 by 5 arc

  16. Sensitivity and uncertainty in crop water footprint accounting: a case study for the Yellow River Basin

    NARCIS (Netherlands)

    Zhuo, L.; Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2014-01-01

    Water Footprint Assessment is a fast-growing field of research, but as yet little attention has been paid to the uncertainties involved. This study investigates the sensitivity of and uncertainty in crop water footprint (in m3 t−1) estimates related to uncertainties in important input variables. The

  17. Future electricity: the challenge of reducing both carbon and water footprint

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Gerbens-Leenes, Winnie; Hoekstra, Arjen Ysbert

    2016-01-01

    We estimate the consumptive water footprint (WF) of electricity and heat in 2035 for the four energy scenarios of the International Energy Agency (IEA) and a fifth scenario with a larger percentage of solar energy. Counter-intuitively, the ‘greenest’ IEA scenario (with the smallest carbon footprint)

  18. Barriers to Mitigate Carbon Footprint in a Selected Academic Institution in Bacoor City, Cavite, Philippines

    Science.gov (United States)

    Adanza, Jonathan R.

    2016-01-01

    Carbon footprint is an environmental menace that needs to be addressed at once. Various mitigating measures were proposed and yet manifestations of its proliferation are very much observable. This study seeks to determine primarily the barriers of non-adherence to identified measures to mitigate carbon footprint in the environment. Using the mixed…

  19. The green, blue and grey water footprint of crops and derived crop products

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2011-01-01

    This study quantifies the green, blue and grey water footprint of global crop production in a spatially-explicit way for the period 1996–2005. The assessment improves upon earlier research by taking a high-resolution approach, estimating the water footprint of 126 crops at a 5 by 5 arc minute grid.

  20. In Vivo Measurement of Rotator Cuff Tear Tension: Medial Versus Lateral Footprint Position.

    Science.gov (United States)

    Dierckman, Brian D; Wang, David W; Bahk, Michael S; Burns, Joseph P; Getelman, Mark H

    2016-01-01

    We conducted a study to evaluate in vivo tension applied to the rotator cuff tendon positioned at the medial versus lateral footprint during arthroscopic rotator cuff repair. We evaluated 20 consecutive patients who underwent arthroscopic rotator cuff repair. During repair, a grasper was inserted through a lateral portal, and a digital weigh scale was attached. The tendon was grasped and translated to the medial footprint, and tension recorded. After a relaxation period, the tendon edge was translated to the lateral footprint, and tension recorded. Mean (SD) tension was 0.41 (0.33) pound when tendons were positioned at the medial footprint and 2.21 (1.20) pounds when they were positioned at the lateral footprint, representing a 5.4-fold difference (P footprint. For larger tears, 4.1 times less tension was applied to the tendons when pulled to the medial versus lateral footprint. This study demonstrated a significant, 5.4-fold increase in tension when the tendon edge was reduced to the lateral as opposed to the medial footprint in vivo.

  1. The blue, green and grey water footprint of rice from a production and consumption perspectives

    NARCIS (Netherlands)

    Chapagain, Ashok; Hoekstra, Arjen Ysbert

    2011-01-01

    The paper makes a global assessment of the green, blue and grey water footprint of rice, using a higher spatial resolution and local data on actual irrigation. The national water footprint of rice production and consumption is estimated using international trade and domestic production data. The

  2. Comparison of the carbon footprint of different patient diets in a Spanish hospital.

    Science.gov (United States)

    Vidal, Rosario; Moliner, Enrique; Pikula, Andrej; Mena-Nieto, Angel; Ortega, Agustín

    2015-01-01

    Mitigating climate change requires management strategies to reduce greenhouse gas emissions in any sector, including the health system. Carbon footprint calculations should play a key role in quantifying and communicating these emissions. Food is among the categories with low accuracy because the carbon footprint for food is still under development. We aimed to quantify the carbon footprint of different diets. Average carbon footprint for a normal diet was based on detailed composition data in Juan Ramón Jiménez Hospital (Huelva, Spain). In addition, the carbon footprints of 17 other therapeutic diets were estimated using a streamlined variation of each diet published by Benidorm Clinical Hospital (Spain). The carbon footprint was calculated for 18 hospital diets for a variety of patients. The reference menu corresponds to the normal diet provided to patients who do not have special dietary requirements. This menu has a low carbon footprint of 5.083 CO₂ eq/day. Hospital diets contribute to the carbon footprint of a hospital. The type of diet has a significant impact on the greenhouse gas emissions. A Mediterranean diet is associated with lower environmental impact than diets with more meat, in particular red meat. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  3. Genome-Wide Footprints of Pig Domestication and Selection Revealed through Massive Parallel Sequencing of Pooled DNA

    NARCIS (Netherlands)

    Amaral, A.J.; Ferretti, L.; Megens, H.J.W.C.; Crooijmans, R.P.M.A.; Nie, H.; Ramos-Onsins, S.E.; Perez-Enciso, M.; Schook, L.B.; Groenen, M.A.M.

    2011-01-01

    Background Artificial selection has caused rapid evolution in domesticated species. The identification of selection footprints across domesticated genomes can contribute to uncover the genetic basis of phenotypic diversity. Methodology/Main Findings Genome wide footprints of pig domestication and

  4. Implementation of Multiple Access Techniques Applicable for Maritime Satellite Communications

    OpenAIRE

    Stojce Dimov Ilcev

    2013-01-01

    In this paper are introduced fundamentals, characteristics, advantages and disadvantages of Multiple Access (MA) employed as transmission techniques in the Maritime Mobile Satellite Communications (MMSC) between ships and Coast Earth Station (CES) via Geostationary Earth Orbit (GEO) or Not-GEO satellite constellations. In fixed satellite communication, as a rule, especially in MMSC many users are active at the same time. The problem of simultaneous communications between many single or multip...

  5. Static Footprint Local Forces, Areas, and Aspect Ratios for Three Type 7 Aircraft Tires

    Science.gov (United States)

    Howell, William E.; Perez, Sharon E.; Vogler, William A.

    1991-01-01

    The National Tire Modeling Program (NTMP) is a joint NASA/industry effort to improve the understanding of tire mechanics and develop accurate analytical design tools. This effort includes fundamental analytical and experimental research on the structural mechanics of tires. Footprint local forces, areas, and aspect ratios were measured. Local footprint forces in the vertical, lateral, and drag directions were measured with a special footprint force transducer. Measurements of the local forces in the footprint were obtained by positioning the transducer at specified locations within the footprint and externally loading the tires. Three tires were tested: (1) one representative of those used on the main landing gear of B-737 and DC-9 commercial transport airplanes, (2) a nose landing gear tire for the Space Shuttle Orbiter, and (3) a main landing gear tire for the Space Shuttle Orbiter. Data obtained for various inflation pressures and vertical loads are presented for two aircraft tires. The results are presented in graphical and tabulated forms.

  6. An enigmatic, diminutive theropod footprint in the shallow marine Pliensbachian Hasle Formation, Bornholm, Denmark

    DEFF Research Database (Denmark)

    Milàn, Jesper; Surlyk, Finn

    2015-01-01

    localities around the world. The occurrence of a diminutive dinosaur footprint in a shallow marine sandstone is enigmatic. The well-defined morphology of the footprint, together with the very small size of the trackmaker, excludes the possibility that the track was emplaced by a swimming or wading animal......A well-preserved three-toed footprint, measuring 34 mm in length from a very small predatory dinosaur with an estimated hip height of 153 mm and a total body length around 50 cm including tail, is reported from the type section of the marine Lower Jurassic (Pliensbachian), Hasle Formation...... found footprint is interpreted to have walked in shallow beach pools, thus explaining the strange occurrence of the footprint in a marine deposit....

  7. Integration of water footprint accounting and costs for optimal pulp supply mix in paper industry

    DEFF Research Database (Denmark)

    Manzardo, Alessandro; Ren, Jingzheng; Piantella, Antonio

    2014-01-01

    studies have focused on these aspects, but there have been no previous reports on the integrated application of raw material water footprint accounting and costs in the definition of the optimal supply mix of chemical pulps from different countries. The current models that have been applied specifically......Chemical pulp is one of the most important raw materials used in the paper industry. This material is known to make a significant contribution to the water footprint and cost of final paper products; therefore, chemical pulp is crucial in determining the competitiveness of final products'. Several...... that minimizes the water footprint accounting results and costs of chemical pulp, thereby facilitating the assessment of the water footprint by accounting for different chemical pulps purchased from various suppliers, with a focus on the efficiency of the production process. Water footprint accounting...

  8. Protein Footprinting by Carbenes on a Fast Photochemical Oxidation of Proteins (FPOP) Platform

    Science.gov (United States)

    Zhang, Bojie; Rempel, Don L.; Gross, Michael L.

    2016-03-01

    Protein footprinting combined with mass spectrometry provides a method to study protein structures and interactions. To improve further current protein footprinting methods, we adapted the fast photochemical oxidation of proteins (FPOP) platform to utilize carbenes as the footprinting reagent. A Nd-YAG laser provides 355 nm laser for carbene generation in situ from photoleucine as the carbene precursor in a flow system with calmodulin as the test protein. Reversed-phase liquid chromatography coupled with mass spectrometry is appropriate to analyze the modifications produced in this footprinting. By comparing the modification extent of apo and holo calmodulin on the peptide level, we can resolve different structural domains of the protein. Carbene footprinting in a flow system is promising.

  9. Carbon footprint of a reflective foil and comparison with other solutions for thermal insulation in building envelope

    International Nuclear Information System (INIS)

    Proietti, Stefania; Desideri, Umberto; Sdringola, Paolo; Zepparelli, Francesco

    2013-01-01

    Highlights: ► Environmental and energy assessment of thermal insulating materials in building envelope. ► Carbon footprint of a reflective foil, conceived and produced by an Italian company. ► Study conducted according to principles of LCA – Life Cycle Assessment. ► Identification of main impacting processes and measures for reducing emissions. ► Comparison with traditional insulating materials (EPS and rockwool). - Abstract: The present study aims at assessing environmental and energy compatibility of different solutions of thermal insulation in building envelope. In fact a good insulation results in a reduction of heating/cooling energy consumptions; on the other hand construction materials undergo production, transformation and transport processes, whose energy and resources consumptions may lead to a significant decrease of the environmental benefits. The paper presents a detailed carbon footprint of a product (CFP, defined as the sum of greenhouse gas emissions and removals of a product system, expressed in CO 2 equivalents), which is a reflective foil conceived and produced by an Italian company. CFP can be seen as a Life Cycle Assessment with climate change as the single impact category; it does not assess other potential social, economic and environmental impacts arising from the provision of products. The analysis considers all stages of the life cycle, from the extraction of raw materials to the product’s disposal, i.e. “from cradle to grave”; it was carried out according to UNI EN ISO 14040 and 14044, and LCA modelling was performed using SimaPro software tool. On the basis of obtained results, different measures have been proposed in order to reduce emissions in the life cycle and neutralize residual carbon footprint. The results allowed to make an important comparison concerning the environmental performance of the reflective foil in comparison with other types of insulating materials

  10. Invited review: Resource inputs and land, water and carbon footprints from the production of edible protein of animal origin

    OpenAIRE

    Flachowsky, Gerhard; Meyer, Ulrich; Südekum, Karl-Heinz

    2018-01-01

    The objective of this review is to analyze crucial factors in the output from the production of proteins in food of animal origin, such as milk, meat and eggs. We then consider inputs such as land, water, fuel, minerals and feed, as well as characterize emissions. Finally, we estimate footprints for land (land footprint, LF), water (water footprint, WF) and greenhouse gas emissions (i.e., carbon footprint, CF) during the production process. The wide range of different land a...

  11. Meteorological satellite accomplishments

    Science.gov (United States)

    Allison, L. J.; Arking, A.; Bandeen, W. R.; Shenk, W. E.; Wexler, R.

    1975-01-01

    Meteorological satellites include experimental satellites operated by NASA and operational satellites operated by the National Oceanic and Atmospheric Administration (NOAA). The operational system currently provides pictures of the entire globe, temperature measurements throughout the world, and wind measurements in selected parts of the Atlantic and Pacific oceans. Aspects of vertical sounding are discussed along with questions of parameter extraction technique development, macroscale phenomena, the heat budget of the earth-atmosphere system and the climate, and studies of ocean surface and hydrology.

  12. Estimation of Water Footprint Compartments in National Wheat Production

    Directory of Open Access Journals (Sweden)

    B. Ababaei

    2016-09-01

    Full Text Available Introduction: Water use and pollution have raised to a critical level in many compartments of the world. If humankind is to meet the challenges over the coming fifty years, the agricultural share of water use has to be substantially reduced. In this study, a modern yet simple approach has been proposed through the introduction concept ‘Water Footprint’ (WF. This concept can be used to study the connection between each product and the water allocation to produce that product. This research estimates the green, blue and gray WF of wheat in Iran. Also a new WF compartment (white is used that is related about irrigation water loss. Materials and Methods: The national green (Effective precipitation, blue (Net irrigation requirement, gray (For diluting chemical fertilizers and white (Irrigation water losses water footprints (WF of wheat production were estimated for fifteen major wheat producing provinces of Iran. Evapotranspiration, irrigation requirement, gross irrigation requirement and effective rainfall were got using the AGWAT model. Yields of irrigated and rain-fed lands of each province were got from Iran Agricultural-Jihad Ministry. Another compartment of the wheat production WF is related about the volume of water required to assimilate the fertilizers leached in runoff (gray WF. Moreover, a new concept of white water footprint was proposed here and represents irrigation water losses, which was neglected in the original calculation framework. Finally, the national WF compartments of wheat production were estimated by taking the average of each compartment over all the provinces weighted by the share of each province in total wheat production of the selected provinces. Results and Discussion: In 2006-2012, more than 67% of the national wheat production was irrigated and 32.3% were rain-fed, on average, while 37.9% of the total wheat-cultivated lands were irrigated and 62.1% was rain-fed from more than 6,568 -ha. The total national WF of

  13. Identification of selection footprints on the X chromosome in pig.

    Directory of Open Access Journals (Sweden)

    Yunlong Ma

    Full Text Available Identifying footprints of selection can provide a straightforward insight into the mechanism of artificial selection and further dig out the causal genes related to important traits. In this study, three between-population and two within-population approaches, the Cross Population Extend Haplotype Homozygosity Test (XPEHH, the Cross Population Composite Likelihood Ratio (XPCLR, the F-statistics (Fst, the Integrated Haplotype Score (iHS and the Tajima's D, were implemented to detect the selection footprints on the X chromosome in three pig breeds using Illumina Porcine60K SNP chip. In the detection of selection footprints using between-population methods, 11, 11 and 7 potential selection regions with length of 15.62 Mb, 12.32 Mb and 9.38 Mb were identified in Landrace, Chinese Songliao and Yorkshire by XPEHH, respectively, and 16, 13 and 17 potential selection regions with length of 15.20 Mb, 13.00 Mb and 19.21 Mb by XPCLR, 4, 2 and 4 potential selection regions with length of 3.20 Mb, 1.60 Mb and 3.20 Mb by Fst. For within-population methods, 7, 10 and 9 potential selection regions with length of 8.12 Mb, 8.40 Mb and 9.99 Mb were identified in Landrace, Chinese Songliao and Yorkshire by iHS, and 4, 3 and 2 potential selection regions with length of 3.20 Mb, 2.40 Mb and 1.60 Mb by Tajima's D. Moreover, the selection regions from different methods were partly overlapped, especially the regions around 22∼25 Mb were detected under selection in Landrace and Yorkshire while no selection in Chinese Songliao by all three between-population methods. Only quite few overlap of selection regions identified by between-population and within-population methods were found. Bioinformatics analysis showed that the genes relevant with meat quality, reproduction and immune were found in potential selection regions. In addition, three out of five significant SNPs associated with hematological traits reported in our genome-wide association study were harbored in

  14. Carbon footprint and ammonia emissions of California beef production systems.

    Science.gov (United States)

    Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

    2012-12-01

    Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

  15. Soil Respiration in Eddy Covariance Footprints using Forced Diffusion

    Science.gov (United States)

    Nickerson, N.; Gabriel, C. E.; Creelman, C.

    2016-12-01

    Eddy covariance (EC) has been widely used across the globe for more than 20 years, offering researchers invaluable measurements of parameters including Net Ecosystem Exchange and ecosystem respiration. However, research suggests that EC assumptions and technical obstacles can cause biased gas exchange estimates. Measurements of soil respiration (RS) at the ground level may help alleviate these biases; for example, by allowing researchers to reconcile nocturnal EC flux data with RS or by providing a means to inform gap-filling models. RS measurements have been used sparingly alongside EC towers because of the large cost required to scale chamber systems to the EC footprint and data integration and processing burdens. Here we present the Forced Diffusion (FD) method for the measurement of RS at EC sites. The FD method allows for inexpensive and autonomous measurements, providing a scalable approach to matching the EC footprint compared to other RS systems. A pilot study at the Howland Forest AmeriFlux site was carried out from July 15, 2016 to Dec., 2016 using EC, custom-made automated chambers, and FD chambers in tandem. These results emphasize how RS measurements, like those from the eosFD, can identify decoupling of above and below canopy air masses and assist in informing and parameterizing gap-filling techniques. Uncertainty in nocturnal EC fluxes has been extensively characterized at Howland Forest with EC measurements spanning more than 20 years. Similarly, long term automated measurements of RS are also made at Howland, and have already been used to inform EC gap-filling models, making Howland the ideal site for such a study. This study has been designed to reproduce previous findings from Howland using the FD approach, aiming to demonstrate that the measurements taken using the eosFD correlate well with the existing chamber systems and can be used with equal efficacy to inform gap filling models or for other other eddy covariance QA/QC procedures, including

  16. The water footprint of hydraulic fracturing in Sichuan Basin, China.

    Science.gov (United States)

    Zou, Caineng; Ni, Yunyan; Li, Jian; Kondash, Andrew; Coyte, Rachel; Lauer, Nancy; Cui, Huiying; Liao, Fengrong; Vengosh, Avner

    2018-02-23

    Shale gas is likely to play a major role in China's transition away from coal. In addition to technological and infrastructural constraints, the main challenges to China's sustainable shale gas development are sufficient shale gas production, water availability, and adequate wastewater management. Here we present, for the first time, actual data of shale gas production and its water footprint from the Weiyuan gas field, one of the major gas fields in Sichuan Basin. We show that shale gas production rates during the first 12 months (24 million m 3 per well) are similar to gas production rates in U.S. shale basins. The amount of water used for hydraulic fracturing (34,000 m 3 per well) and the volume of flowback and produced (FP) water in the first 12 months (19,800 m 3 per well) in Sichuan Basin are also similar to the current water footprints of hydraulic fracturing in U.S. basins. We present salinity data of the FP water (5000 to 40,000 mgCl/L) in Sichuan Basin and the treatment operations, which include sedimentation, dilution with fresh water, and recycling of the FP water for hydraulic fracturing. We utilize the water use data, empirical decline rates of shale gas and FP water productions in Sichuan Basin to generate two prediction models for water use for hydraulic fracturing and FP water production upon achieving China's goals to generate 100 billion m 3 of shale gas by 2030. The first model utilizes the current water use and FP production data, and the second assumes a yearly 5% intensification of the hydraulic fracturing process. The predicted water use for hydraulic fracturing in 2030 (50-65 million m 3 per year), FP water production (50-55 million m 3 per year), and fresh water dilution of FP water (25 million m 3 per year) constitute a water footprint that is much smaller than current water consumption and wastewater generation for coal mining, but higher than those of conventional gas production in China. Given estimates

  17. System Requirements for Satellite Video Relays Supporting Unmanned Ground Vehicles

    OpenAIRE

    Randorf, Jeffrey

    1991-01-01

    The Unmanned Ground Vehicle Joint Project Office (UGV/JPO) has identified communications and control as the single most important issue concerning unmanned ground vehicle (UGV) deployment. This paper outlines needed capabilities for potential small satellite data relays for unmanned ground vehicle operations. Satellites could offer a solution to the inherent non-line-of-sight (NLOS), wide bandwidth dilemma.

  18. Hierarchical Supervisor and Agent Routing Algorithm in LEO/MEO Double-layered Optical Satellite Network

    Science.gov (United States)

    Li, Yongjun; Zhao, Shanghong

    2016-09-01

    A novel routing algorithm (Hierarchical Supervisor and Agent Routing Algorithm, HSARA) for LEO/MEO (low earth orbit/medium earth orbit) double-layered optical satellite network is brought forward. The so-called supervisor (MEO satellite) is designed for failure recovery and network management. LEO satellites are grouped according to the virtual managed field of MEO which is different from coverage area of MEO satellite in RF satellite network. In each LEO group, one LEO satellite which has maximal persistent link with its supervisor is called the agent. A LEO group is updated when this optical inter-orbit links between agent LEO satellite and the corresponding MEO satellite supervisor cuts off. In this way, computations of topology changes and LEO group updating can be decreased. Expense of routing is integration of delay and wavelength utilization. HSARA algorithm simulations are implemented and the results are as follows: average network delay of HSARA can reduce 21 ms and 31.2 ms compared with traditional multilayered satellite routing and single-layer LEO satellite respectively; LEO/MEO double-layered optical satellite network can cover polar region which cannot be covered by single-layered LEO satellite and throughput is 1% more than that of single-layered LEO satellite averagely. Therefore, exact global coverage can be achieved with this double-layered optical satellite network.

  19. Function of Junk: Pericentromeric Satellite DNA in Chromosome Maintenance.

    Science.gov (United States)

    Jagannathan, Madhav; Yamashita, Yukiko M

    2018-04-02

    Satellite DNAs are simple tandem repeats that exist at centromeric and pericentromeric regions on eukaryotic chromosomes. Unlike the centromeric satellite DNA that comprises the vast majority of natural centromeres, function(s) for the much more abundant pericentromeric satellite repeats are poorly understood. In fact, the lack of coding potential allied with rapid divergence of repeat sequences across eukaryotes has led to their dismissal as "junk DNA" or "selfish parasites." Although implicated in various biological processes, a conserved function for pericentromeric satellite DNA remains unidentified. We have addressed the role of satellite DNA through studying chromocenters, a cytological aggregation of pericentromeric satellite DNA from multiple chromosomes into DNA-dense nuclear foci. We have shown that multivalent satellite DNA-binding proteins cross-link pericentromeric satellite DNA on chromosomes into chromocenters. Disruption of chromocenters results in the formation of micronuclei, which arise by budding off the nucleus during interphase. We propose a model that satellite DNAs are critical chromosome elements that are recognized by satellite DNA-binding proteins and incorporated into chromocenters. We suggest that chromocenters function to preserve the entire chromosomal complement in a single nucleus, a fundamental and unquestioned feature of eukaryotic genomes. We speculate that the rapid divergence of satellite DNA sequences between closely related species results in discordant chromocenter function and may underlie speciation and hybrid incompatibility. © 2017 Jagannathan and Yamashita; Published by Cold Spring Harbor Laboratory Press.

  20. How China’s nitrogen footprint of food has changed from 1961 to 2010

    Science.gov (United States)

    Guo, Mengchu; Chen, Xiaohui; Bai, Zhaohai; Jiang, Rongfeng; Galloway, James N.; Leach, Allison M.; Cattaneo, Lia R.; Oenema, Oene; Ma, Lin; Zhang, Fusuo

    2017-10-01

    People have increased the amount of reactive nitrogen (Nr) in the environment as a result of food production methods and consumption choices. However, the connection between dietary choices and environmental impacts over time has not yet been studied in China. Here we combine a nitrogen footprint tool, the N-Calculator, with a food chain model, NUFER (NUtrient flows in Food chains, Environment and Resources use), to analyze the N footprint of food in China. We use the NUFER model to provide a detailed estimation of the amounts and forms of Nr released to the environment during food production, which is then used to calculate virtual nitrogen factors (VNFs, unit: kg N released/kg N in product) of major food items. The food N footprint consists of the food consumption N footprint and food production N footprint. The average per capita food N footprint increased from 4.7 kg N capita-1 yr-1 in the 1960s to 21 kg N capita-1 yr-1 in the 2000s, and the national food N footprint in China increased from 3.4 metric tons (MT) N yr-1 in the 1960s to 28 MT N yr-1 in the 2000s. The proportion of the food N footprint that is animal-derived increased from 37% to 54% during this period. The food production N footprint accounted for 84% of the national food N footprint in the 2000s, compared to 62% in the 1960s. More Nr has been added to the food production systems to produce enough food for a growing population that is increasing its per-capita food consumption. The increasing VNFs in China indicate that an increasing amount of Nr is being lost per unit of N embedded in food products consumed by humans in the past five decades. National N losses from food production increased from 6 MT N yr-1 in the 1960s to 23 MT N yr-1 in the 2000s. N was lost to the environment in four ways: ammonia (NH3) emissions and dinitrogen (N2) emissions through denitrification (each account for nearly 40%), N losses to water systems (20%), and nitrous oxide (N2O) emissions (1%). The average per

  1. Measuring forest structure along productivity gradients in the Canadian boreal with small-footprint Lidar.

    Science.gov (United States)

    Bolton, Douglas K; Coops, Nicholas C; Wulder, Michael A

    2013-08-01

    The structure and productivity of boreal forests are key components of the global carbon cycle and impact the resources and habitats available for species. With this research, we characterized the relationship between measurements of forest structure and satellite-derived estimates of gross primary production (GPP) over the Canadian boreal. We acquired stand level indicators of canopy cover, canopy height, and structural complexity from nearly 25,000 km of small-footprint discrete return Light Detection and Ranging (Lidar) data and compared these attributes to GPP estimates derived from the MODerate resolution Imaging Spectroradiometer (MODIS). While limited in our capacity to control for stand age, we removed recently disturbed and managed forests using information on fire history, roads, and anthropogenic change. We found that MODIS GPP was strongly linked to Lidar-derived canopy cover (r = 0.74, p Lidar-derived canopy height and structural complexity as these attributes are largely a function of stand age. A relationship was apparent between MODIS GPP and the maximum sampled heights derived from Lidar as growth rates and resource availability likely limit tree height in the prolonged absence of disturbance. The most structurally complex stands, as measured by the coefficient of variation of Lidar return heights, occurred where MODIS GPP was highest as productive boreal stands are expected to contain a wider range of tree heights and transition to uneven-aged structures faster than less productive stands. While MODIS GPP related near-linearly to Lidar-derived canopy cover, the weaker relationships to Lidar-derived canopy height and structural complexity highlight the importance of stand age in determining the structure of boreal forests. We conclude that an improved quantification of how both productivity and disturbance shape stand structure is needed to better understand the current state of boreal forests in Canada and how these forests are changing in

  2. A Geometry-Based Cycle Slip Detection and Repair Method with Time-Differenced Carrier Phase (TDCP) for a Single Frequency Global Position System (GPS) + BeiDou Navigation Satellite System (BDS) Receiver

    OpenAIRE

    Qian, Chuang; Liu, Hui; Zhang, Ming; Shu, Bao; Xu, Longwei; Zhang, Rufei

    2016-01-01

    As the field of high-precision applications based on carriers continues to expand, the development of low-cost, small, modular receivers and their application in diverse scenarios and situations with complex data quality has increased the requirements of carrier-phase data preprocessing. A new geometry-based cycle slip detection and repair method based on Global Position System (GPS) + BeiDou Navigation Satellite System (BDS) is proposed. The method uses a Time-differenced Carrier Phase (TDCP...

  3. Ecological footprint analysis as a tool to assess tourism sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Gossling, Stefan [Institute of Cultural Geography, Freiburg University, Werderring 4, 79085 Freiburg (Germany); Hansson, Carina Borgstrom [Human Ecology Division, Lund University, 223 62 Lund (Sweden); Horstmeier, Oliver [Department of Economic Geography and Tourism Research, Paderborn University, 33095 Paderborn (Germany); Saggel, Stefan [Institute of Cultural Geography, Munster University, 48149 Munster (Germany)

    2002-12-01

    This article has the aim to provide a methodological framework for the calculation of ecological footprints related to leisure tourism. Based on the example of the Seychelles, it reveals the statistical obstacles that have to be overcome in the calculation process and discusses the strengths and weaknesses of such an approach. As many tropical island-states depend heavily on foreign exchange earnings derived from visitors arriving by air, special attention is paid to the use of energy associated with air travel. Furthermore, implications of the findings for national greenhouse inventories are discussed. Finally, as the Seychelles have safeguarded a wide range of ecosystems in protected areas, which are for their existence ultimately dependent on financial resources derived from tourism, the question is raised if long-distance travel can be a means to safeguard biodiversity.

  4. Considerations on methodological challenges for water footprint calculations.

    Science.gov (United States)

    Thaler, S; Zessner, M; De Lis, F Bertran; Kreuzinger, N; Fehringer, R

    2012-01-01

    We have investigated how different approaches for water footprint (WF) calculations lead to different results, taking sugar beet production and sugar refining as examples. To a large extent, results obtained from any WF calculation are reflective of the method used and the assumptions made. Real irrigation data for 59 European sugar beet growing areas showed inadequate estimation of irrigation water when a widely used simple approach was used. The method resulted in an overestimation of blue water and an underestimation of green water usage. Dependent on the chosen (available) water quality standard, the final grey WF can differ up to a factor of 10 and more. We conclude that further development and standardisation of the WF is needed to reach comparable and reliable results. A special focus should be on standardisation of the grey WF methodology based on receiving water quality standards.

  5. Reducing health care's carbon footprint--the power of nursing.

    Science.gov (United States)

    Muñoz, Aliria

    2012-11-01

    Global warming and environmentalism continue to be national and international issues as their complexities and implications become better understood. One ironic contributor to the degradation of the environment is the health care system. Serving as clinical laboratories, hotels, restaurants, and offices that never close, U.S. hospitals produce more than 2 million tons of waste annually. Although the consequences and significance of health care's carbon footprint are undeniable, strategies to reduce this impact are challenging. This article discusses how the role, traits, and knowledge of nurses combined with their positions in the health care system make them key players in creating an environmentally sustainable health care industry. With an analysis of environmental action versus inaction, this article explores how nurses at the forefront of health care are equipped to change practice that will reach far beyond the bedside.

  6. The Transaction Footprints of Scottish Food And Drink SMEs

    Directory of Open Access Journals (Sweden)

    Copus Andrew

    2016-09-01

    Full Text Available This paper presents a survey approach to measuring the “transaction footprints” of rural small and medium sized enterprises (SMEs. Combined with a graphical presentation of results, this contributes to the evidence base on the roles of local and global linkages. Findings suggest that the food and drink industry of Scotland is relatively localised in its input and sales interaction pattern, although substantial variations, associated with product specialisms, remoteness/accessibility, input purchasing and marketing strategies, exist. Localised SMEs have weathered the recession slightly better, but more outward-looking in firms tend to have greater optimism about the future. Transaction footprint analysis should be viewed as component of an ongoing process of re-mapping the network infrastructure of the rural economy, alongside analysis of untraded interdependencies, and institutional networks in the realm of governance.

  7. Revised coordinates of the Mars Orbiter Laser Altimeter (MOLA) footprints

    Science.gov (United States)

    Annibali, S.; Stark, A.; Gwinner, K.; Hussmann, H.; Oberst, J.

    2017-09-01

    We revised the Mars Orbiter Laser Altimeter (MOLA) footprint locations (i.e. areocentric body-fixed latitude and longitude), using updated trajectory models for the Mars Global Surveyor and updated rotation parameters of Mars, including precession, nutation and length-of-day variation. We assess the impact of these updates on the gridded MOLA maps. A first comparison reveals that even slight corrections to the rotational state of Mars can lead to height differences up to 100 m (in particular in regions with high slopes, where large interpolation effects are expected). Ultimately, we aim at independent measurements of the rotation parameters of Mars. We co-register MOLA profiles to digital terrain models from stereo images (stereo DTMs) and measure offsets of the two data sets.

  8. The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2): Science Requirements, Concept, and Implementation

    Science.gov (United States)

    Markus, Thorsten; Neumann, Tom; Martino, Anthony; Abdalati, Waleed; Brunt, Kelly; Csatho, Beata; Farrell, Sinead; Fricker, Helen; Gardner, Alex; Harding, David; hide

    2017-01-01

    The Ice, Cloud, and land Elevation Satellite (ICESat) mission used laser altimetry measurements to determine changes in elevations of glaciers and ice sheets, as well as sea ice thickness distribution. These measurements have provided important information on the response of the cryosphere (Earths frozen surfaces) to changes in atmosphere and ocean condition. ICESat operated from 2003-2009 and provided repeat altimetry measurements not only to the cryosphere scientific community but also to the ocean, terrestrial and atmospheric scientific communities. The conclusive assessment of significant ongoing rapid changes in the Earths ice cover, in part supported by ICESat observations, has strengthened the need for sustained, high accuracy, repeat observations similar to what was provided by the ICESat mission. Following recommendations from the National Research Council for an ICESat follow-on mission, the ICESat-2 mission is now under development for planned launch in 2018. The primary scientific aims of the ICESat-2 mission are to continue measurements of sea ice freeboard and ice sheet elevation to determine their changes at scales from outlet glaciers to the entire ice sheet, and from 10s of meters to the entire polar oceans for sea ice freeboard. ICESat carried a single beam profiling laser altimeter that produced approximately 70 m diameter footprints on the surface of the Earth at approximately 150 m along-track intervals. In contrast, ICESat-2 will operate with three pairs of beams, each pair separated by about 3 km across-track with a pair spacing of 90 m. Each of the beams will have a nominal 17 m diameter footprint with an along-track sampling interval of 0.7 m. The differences in the ICESat-2 measurement concept are a result of overcoming some limitations associated with the approach used in the ICESat mission. The beam pair configuration of ICESat-2 allows for the determination of local cross-track slope, a significant factor in measuring elevation change

  9. A life-cycle carbon footprint of Yosemite National Park

    International Nuclear Information System (INIS)

    Villalba, Gara; Tarnay, Leland; Campbell, Elliott; Gabarrell, Xavier

    2013-01-01

    Like cities, many large national parks in the United States often include “urban” visitor and residential areas that mostly demand (rather than produce) energy and key urban materials. The U.S. National Park Service has committed to quantifying and reducing scopes 1 and 2 emissions by 35% and scope 3 emissions by 10% by 2020 for all parks. Current inventories however do not provide the specificity or granularity to evaluate solutions that address fundamental inefficiencies in these inventories. By quantifying and comparing the importance of different inventory sectors as well as upstream and downstream emissions in Yosemite National Park (YNP), this carbon footprint provides a case study and potential template for quantifying future emissions reductions, and for evaluating tradeoffs between them. Results indicate that visitor-related emissions comprise the largest fraction of the Yosemite carbon footprint, and that increases in annual visitation (3.43–3.90 million) coincide with and likely drive interannual increases in the magnitude of Yosemite′s extended inventory (126,000–130,000 t CO 2 e). Given this, it is recommended that “per visitor” efficiency be used as a metric to track progress. In this respect, YNP has annually decreased kilograms of GHG emissions per visitor from 36.58 (2008) to 32.90 (2011). We discuss opportunities for reducing this measure further. - Highlights: • A potential template for inventorying GHG emissions in national parks is presented. • Given variability in visitation, GHG/visitor is a better metric to measure efficiency. • Yosemite has reduced from 36.58 kg (2008) GHG emissions/visitor to 32.90 (2011)

  10. HOOKED FLARE RIBBONS AND FLUX-ROPE-RELATED QSL FOOTPRINTS

    International Nuclear Information System (INIS)

    Zhao, Jie; Li, Hui; Gilchrist, Stuart A.; Aulanier, Guillaume; Schmieder, Brigitte; Pariat, Etienne

    2016-01-01

    We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare that begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by the Solar Dynamics Observatory /Atmospheric Imaging Assembly can be well reproduced from a Grad–Rubin nonlinear force-free field extrapolation method. Various inverse-S- and inverse-J-shaped magnetic field lines, which surround a coronal flux rope, coincide with the sigmoid as observed in different extreme-ultraviolet wavelengths, including its multithreaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and setup of the Grad–Rubin method. The modeled double inverse-J-shaped quasi-separatrix layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse-teardrop-shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares and the geometrical properties of eruptive flux ropes.

  11. CARBON FOOTPRINT ANALYSIS OF A T-45 HOUSE IN KUPANG

    Directory of Open Access Journals (Sweden)

    LAPENANGGA Apridus

    2016-12-01

    Full Text Available Carbon dioxide (CO2 and CO2e concentration in the atmosphere steadily increases and, in some places, has passed 360ppm, which is the limiting point agreed by world leaders to slow down and stop global warming. Housing sectors have been claimed to emit significant amounts of CO2. This paper reports a research on the carbon footprint of a T-45 house in Kupang. The research calculated in detail the carbon emission of the house since its pre-construction stage (design process, construction stage, to the post-construction stage (house operation from year one to year 25. The T-45 house was selected as this type is the smallest standard house for a family of three in Indonesia. Literature, survey and analytical methods were adopted. The research found that the longer the house was used, the lower the carbon emission borne by each occupant per year. From year one to year 25, the total carbon emission borne by each occupant decreased from 3,590,793.44 to 145,568.38 kgCO2 per year. The construction stage emits a considerable amount of CO2 so that its carbon footprint still dominates the proportion of carbon emission per year per occupant, 98.61%. In the construction stage, use of cement in the wall and concrete structure works contributes the largest proportion of carbon emission, 96.7%. Therefore, using locally available construction materials, in particular, natural ones with less or zero carbon emission, is highly recommended.

  12. The Digital Footprint of Academic Urologists: Where Do we Stand?

    Science.gov (United States)

    Gill, Bradley C; Ericson, Kyle J; Hemal, Sij; Babbar, Paurush; Shoskes, Daniel A

    2016-04-01

    To characterize the digital footprint of academic urologists by examining their web search results and identifying patterns within them. Faculty lists were obtained from the top 10 ranked Urology residency program websites. A standardized Google search for "First Name Last Name Degree" was then completed for each staff physician. The total number of results and type of sites returned were recorded and patterns contained within identified. A total of 247 staff physicians were identified, with 13-36 per institution. A median of 11 (interquartile range: 10-12) search results returned for each person. Most (number = 231) staff had at least 1 rating site returned, with a mean of 3.50 (standard deviation: 1.45) noted. Overall, 3.44 (1.39) pages related to the practice were listed. Social media use was poorly visible, with a median 0 [0-1] results listed and only 7 Twitter accounts observed. More than half of sites, 6.34 (1.87) on average, were physician-controllable content. Having certain types of results was significantly associated with fewer ratings sites. Having an additional degree was also associated with significantly fewer ratings sites and more sites with physician-controllable content. The digital footprint of academic urologists contains more physician-controllable content than noncontrollable information; however, social media visibility in this group is poor. Optimization of the digital identity of academic urologists may be possible by exploiting the patterns observed in this study. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Deep-sea benthic footprint of the deepwater horizon blowout.

    Directory of Open Access Journals (Sweden)

    Paul A Montagna

    Full Text Available The Deepwater Horizon (DWH accident in the northern Gulf of Mexico occurred on April 20, 2010 at a water depth of 1525 meters, and a deep-sea plume was detected within one month. Oil contacted and persisted in parts of the bottom of the deep-sea in the Gulf of Mexico. As part of the response to the accident, monitoring cruises were deployed in fall 2010 to measure potential impacts on the two main soft-bottom benthic invertebrate groups: macrofauna and meiofauna. Sediment was collected using a multicorer so that samples for chemical, physical and biological analyses could be taken simultaneously and analyzed using multivariate methods. The footprint of the oil spill was identified by creating a new variable with principal components analysis where the first factor was indicative of the oil spill impacts and this new variable mapped in a geographic information system to identify the area of the oil spill footprint. The most severe relative reduction of faunal abundance and diversity extended to 3 km from the wellhead in all directions covering an area about 24 km(2. Moderate impacts were observed up to 17 km towards the southwest and 8.5 km towards the northeast of the wellhead, covering an area 148 km(2. Benthic effects were correlated to total petroleum hydrocarbon, polycyclic aromatic hydrocarbons and barium concentrations, and distance to the wellhead; but not distance to hydrocarbon seeps. Thus, benthic effects are more likely due to the oil spill, and not natural hydrocarbon seepage. Recovery rates in the deep sea are likely to be slow, on the order of decades or longer.

  14. Measuring Carbon Footprint of Flexible Pavement Construction Project in Indonesia

    Directory of Open Access Journals (Sweden)

    Utomo Dwi Hatmoko Jati

    2018-01-01

    Full Text Available Road infrastructure in Indonesia is mainly dominated by flexible pavement type. Its construction process, however, has raised concerns in terms of its environment impacts. This study aims to track and measure the carbon footprint of flexible pavement. The objectives are to map the construction process in relation to greenhouse gas (GHG emissions, to quantify them in terms of carbon dioxide equivalents (CO2e as generated by the process of production and transportation of raw materials, and the operation of plant off-site and on-site project. Data collection was done by having site observations and interviews with project stakeholders. The results show a total emissions of 70.888 tonnes CO2e, consisting of 34.248 tonnes CO2e (48.31% off-site activities and 36.640 tonnes CO2e (51.687% on-site activities. The two highest CO2e emissions were generated by the use of plant for asphalt concrete laying activities accounted 34.827 tonnes CO2e (49.130%, and material transportation accounted 24.921 (35.155%. These findings provide a new perspective of the carbon footprint in flexible pavement and suggest the urgent need for the use of more efficient and environmentally friendly plant in construction process as it shows the most significant contribution on the CO2e. This study provides valuable understanding on the environmental impact of typical flexible pavement projects in Indonesia, and further can be used for developing green road framework.

  15. Satellite Communications Industry

    Science.gov (United States)

    1993-04-01

    Ariane $loom SAJAC 1 Hughes Satellite Japan 06/94 $150m SAJAC 2 Hughes Satellite Japan -- (spare) $150m SatcomHl GE GE Americom /95 $50m SOLIDARIDAD ...1 Hughes SCT (Mexico) 11/93 Ariane $loom SOLIDARIDAD 2 Hughes SCT (Mexico) /94 $loom Superbird Al Loral Space Com Gp (Jap) 11/92 Ariane $175m

  16. Partnership via Satellite.

    Science.gov (United States)

    Powell, Marie Clare

    1980-01-01

    Segments of the 1980 National Catholic Educational Association (NCEA) conference were to be telecast nationally by satellite. The author briefly explains the satellite transmission process and advises Catholic educators on how to pick up the broadcast through their local cable television system. (SJL)

  17. MEMOS - Mars Environment Monitoring Satellite

    Science.gov (United States)

    Ott, T.; Barabash, S.; von Schéele, F.; Clacey, E.; Pokrupa, N.

    2007-08-01

    The Swedish Institute of Space Physics (IRF) in cooperation with the Swedish Space Corporation (SSC) has conducted first studies on a Mars Environment Monitoring Satellite (MEMOS). The MEMOS microsatellite (mass 2 kbit/s. The transceiver also implements a coherent transponding mode for orbit determination through two-way Doppler ranging between the parent satellite and MEMOS. In addition ELT is compatible with a future Martian communication and navigation network pursued by NASA, which could be taken advantage of in the future for relaying data or performing ranging via other satellites part of the network. A system design driver for inter-satellite communication at Mars is the high demand of power. This leads to a disk-shape and thus easy to accommodate spacecraft configuration of MEMOS comprising a single sun-pointing solar array favourable in terms of power and spin stability. Multi-junction solar cells, which currently have an efficiency of ~29% under laboratory conditions are a key factor to keep MEMOS solar array area of ~1.15 m2 small compared to the worst case system power requirements of ~105 W. During eclipse periods high-efficient Li-ion batteries (6 x 20 Wh) will ensure power supply. The spacecraft and payload design will incorporate new technology developments such as autonomous navigation, MicroElectroMechanical Systems MEMS, Micro- Opto-ElectroMechanical Systems MOEMS and new materials to achieve low mass at high performance. Thereby it will profit from Swedish developments and heritage in small- / microsatellites like Astrid-2, SMART-1 or the upcoming rendezvous and formation flying demonstration mission PRISMA.

  18. The satellite situation center

    International Nuclear Information System (INIS)

    Teague, M.J.; Sawyer, D.M.; Vette, J.I.

    1982-01-01

    Considerations related to the early planning for the International Magnetospheric Study (IMS) took into account the desirability of an establishment of specific entities for generating and disseminating coordination information for both retrospective and predictive periods. The organizations established include the IMS/Satellite Situation Center (IMS/SSC) operated by NASA. The activities of the SSC are related to the preparation of reports on predicted and actually achieved satellite positions, the response to inquiries, the compilation of information on satellite experiments, and the issue of periodic status summaries. Attention is given to high-altitude satellite services, other correlative satellite services, non-IMS activities of the SSC, a summary of the SSC request activity, and post-IMS and future activities

  19. A satellite for Asia

    Science.gov (United States)

    Lawrence, John D. R.

    In April 1990, an American satellite will be launched by China on the Long March 3 rocket. This satellite, called AsiaSat 1 will provide domestic telecommunications service to the countries of Asia. AsiaSat 1 is designed to provide satellite communications services to China, Thailand and Pakistan. These services will also be available for the use of neighboring countries such as Korea, Hong Kong, Burma and Nepal. As an independently financed satellite, it will provide services to each of these countries on an equal access basis and will be shared by these countries depending on their needs. The satellite's 24 C-band transponders will be leased or sold to customers in each of these countries. Transponders will be used for many purposes including back-up to national telephone networks, new private network services and the distribution of television programs.

  20. Carbon footprint assessment for a local branded pure milk product: a lifecycle based approach

    Directory of Open Access Journals (Sweden)

    Rui ZHAO

    Full Text Available Abstract This paper provides a simplified life cycle based assessment for a local branded pure milk product, to measure its related carbon footprint, including production of raw milk, dairy processing, transportation of milk product and disposal of packaging waste. The results show that the total carbon footprint of the pure milk is 1120g CO2/L. The production of raw milk is identified as the major contributor to the carbon footprint. This contribution has amounted to 843 g of CO2 per liter of pure milk, accounted for 75.27% of the total carbon footprint. The carbon footprint of product transportation is 38 g of CO2 per liter, which accounts for 3.39% of the total. The carbon footprint related to the dairy processing and disposal of waste packaging is 173 g of CO2 per liter and 66 g of CO2 per liter, accounting for 15.45% and 5.89% of the total, respectively. The carbon footprint assessment intends to help dairy enterprises identify the intensive sectors of carbon emissions, and provides insight into improvement of product environmental performances.

  1. A first empirical comparison of energy Footprints embodied in trade. MRIO versus PLUM

    International Nuclear Information System (INIS)

    Wiedmann, Thomas

    2009-01-01

    The Ecological Footprint as an indicator that accounts for human demand on global bioproductivity sets out to quantify the impacts associated with consumption in a given country, including the impacts associated with trade. The National Footprint Accounts (NFA) by Global Footprint Network (GFN) calculate trade-embodied Footprints by multiplying yield and embodied energy factors with mass volumes of traded goods in a 'Product Land Use Matrix (PLUM)'. This article compares energy Footprints embodied in trade from and to the United Kingdom in 2002 as calculated by the NFA-PLUM with the results from a recently developed multi-region input-output model (MRIO) for the UK. Although totals for imports and exports are comparable, breaking down the results by economic sectors reveals large differences and hardly any correlation between the two methods. The omission of trade in services (especially transport services) and upstream impacts of energy goods (fossil fuels) and the use of inappropriate embodied energy factors in the NFA-PLUM method are identified as the main reasons for these differences. In the light of the results it seems that a comprehensive Footprint account of trade can better be achieved with an input-output based approach. I conclude that MRIO models - once fully developed - will be particularly suitable in the future to estimate the Ecological Footprints of imports and exports of nations with the possibility to track their origin via inter-industry linkages, international supply chains and multi-national trade flows. (author)

  2. The history of dinosaur footprint discoveries in Wyoming with emphasis on the Bighorn Basin

    Science.gov (United States)

    Kvale, Erik P.; Mickelson, Debra L.; Hasiotis, Stephen T; Johnson, Gary D.

    2003-01-01

    Dinosaur traces are well known from the western United States in the Colorado Plateau region (Utah, Colorado, New Mexico, and Arizona). Utah contains the greatest abundance of known and documented dinosaur footprints and trackways. Far less well known, however, is the occurrence and distribution of dinosaur footprint-bearing horizons in Wyoming. Scientific studies over the past 10 years have shown that three of the four Middle and Upper Jurassic formations in northern Wyoming contain dinosaur footprints. Two of the footprint-bearing horizons are located in geologic intervals that were once thought to have been deposited in offshore to nearshore marine settings and represent rare North American examples of Middle Jurassic (Bajocian and Bathonian) dinosaur remains. Some of these new Wyoming sites can be correlated to known dinosaur footprint-bearing horizons or intervals in Utah. Wyoming has a great potential for additional discoveries of new dinosaur footprint-bearing horizons, and further prospecting and study is warranted and will ultimately lead to a much better understanding of the geographic distribution and behavior of the potential footprint-makers.

  3. Association of footprint measurements with plantar kinetics: a linear regression model.

    Science.gov (United States)

    Fascione, Jeanna M; Crews, Ryan T; Wrobel, James S

    2014-03-01

    The use of foot measurements to classify morphology and interpret foot function remains one of the focal concepts of lower-extremity biomechanics. However, only 27% to 55% of midfoot variance in foot pressures has been determined in the most comprehensive models. We investigated whether dynamic walking footprint measurements are associated with inter-individual foot loading variability. Thirty individuals (15 men and 15 women; mean ± SD age, 27.17 ± 2.21 years) walked at a self-selected speed over an electronic pedography platform using the midgait technique. Kinetic variables (contact time, peak pressure, pressure-time integral, and force-time integral) were collected for six masked regions. Footprints were digitized for area and linear boundaries using digital photo planimetry software. Six footprint measurements were determined: contact area, footprint index, arch index, truncated arch index, Chippaux-Smirak index, and Staheli index. Linear regression analysis with a Bonferroni adjustment was performed to determine the association between the footprint measurements and each of the kinetic variables. The findings demonstrate that a relationship exists between increased midfoot contact and increased kinetic values in respective locations. Many of these variables produced large effect sizes while describing 38% to 71% of the common variance of select plantar kinetic variables in the medial midfoot region. In addition, larger footprints were associated with larger kinetic values at the medial heel region and both masked forefoot regions. Dynamic footprint measurements are associated with dynamic plantar loading kinetics, with emphasis on the midfoot region.

  4. Enterprise Level Status and Control of Multi-Satellite Operations

    Data.gov (United States)

    National Aeronautics and Space Administration — Single-satellite mission operation centers are used for nearly all Goddard Space Flight Center (GSFC) mission ground data systems, with a focus on localized data...

  5. Beware the single hit!

    CERN Multimedia

    2008-01-01

    The first time that single particle effects from cosmic rays on electronics were observed was in 1991, when one of the instruments aboard an ESA satellite broke down after only five days in space. On 5 July, the TS-LEA group will have completed the installation of monitors that will help to reduce similar dangerous effects on LHC electronics.

  6. Integration Of GPS And GLONASS Systems In Geodetic Satellite Measurements

    Science.gov (United States)

    Maciuk, Kamil

    2015-12-01

    The article shows the results of satellites measurements elaborations using GPS & GLONASS signals. The aim of this article is to define the influence of adding GLONASS signals on position determination accuracy. It especially concerns areas with big horizon coverages. Object of the study were analysis of DOP coefficients, code and RTK solutions, and usage of satellite techniques in levelling. The performed studies and analysis show that integrated GPS-GLONASS satellite measurements provide possibility to achieve better results than measurements using single navigation satellite system (GPS).

  7. Carbon footprints of cities and other human settlements in the UK

    Science.gov (United States)

    Minx, Jan; Baiocchi, Giovanni; Wiedmann, Thomas; Barrett, John; Creutzig, Felix; Feng, Kuishuang; Förster, Michael; Pichler, Peter-Paul; Weisz, Helga; Hubacek, Klaus

    2013-09-01

    A growing body of literature discusses the CO2 emissions of cities. Still, little is known about emission patterns across density gradients from remote rural places to highly urbanized areas, the drivers behind those emission patterns and the global emissions triggered by consumption in human settlements—referred to here as the carbon footprint. In this letter we use a hybrid method for estimating the carbon footprints of cities and other human settlements in the UK explicitly linking global supply chains to local consumption activities and associated lifestyles. This analysis comprises all areas in the UK, whether rural or urban. We compare our consumption-based results with extended territorial CO2 emission estimates and analyse the driving forces that determine the carbon footprint of human settlements in the UK. Our results show that 90% of the human settlements in the UK are net importers of CO2 emissions. Consumption-based CO2 emissions are much more homogeneous than extended territorial emissions. Both the highest and lowest carbon footprints can be found in urban areas, but the carbon footprint is consistently higher relative to extended territorial CO2 emissions in urban as opposed to rural settlement types. The impact of high or low density living remains limited; instead, carbon footprints can be comparatively high or low across density gradients depending on the location-specific socio-demographic, infrastructural and geographic characteristics of the area under consideration. We show that the carbon footprint of cities and other human settlements in the UK is mainly determined by socio-economic rather than geographic and infrastructural drivers at the spatial aggregation of our analysis. It increases with growing income, education and car ownership as well as decreasing household size. Income is not more important than most other socio-economic determinants of the carbon footprint. Possibly, the relationship between lifestyles and infrastructure only

  8. A full value-chain Water Footprint Assessment to help informed decision in corporate sustainability strategies

    Science.gov (United States)

    Zhang, Guoping; Chico Zamanilo, Daniel; Bai, Xue; Ren, Xiajing; Chen, Rong; Qin, Jun

    2017-04-01

    This study evaluated the water footprint (WF) of five production facilities along Muyuan Foodstuff Co. Ltd's (Muyuan) value chain, and assessed the sustainability and impact of their water footprints at the river catchment level. Muyuan, a large-scale, integrated pig breeder and producer in China, is keen to fulfil its corporate social responsibilities and committed to ensuring food quality and security, promoting environmental protection, and participating in catchment water resources management. Formulating corporate water related sustainability strategies, however, has been challenging. This study carried out a comprehensive Water Footprint Assessment (WFA) for Muyuan's full value chain to assist in formulating such strategies and setting up action plans with water footprint reduction targets. The study showed that that the water footprint of the supply chain, resulting from crops and crop products used in Muyuan's feed production facility is a major contributor to Muyuan's facilities' water footprint. From the perspective of the direct WF at the facilities, addressing the impact on water quality from effluents (i.e. the grey water footprint) at hog farms is a critical component of any water sustainability strategy. From the blue WF perspective, there are opportunities to reduce blue water consumption at hog farms through improved technology and implementation of best practices. The water footprint sustainability assessment in this study indicated that Muyuan operates in a catchment which is already under water stress and is a hotspot in terms of both blue water scarcity and water pollution level. The study helped identify potential water-related risks and opportunities for improving Muyuan's water use efficiency as well as ways Muyuan could contribute to sustainable water resources management in the catchment within which it operates. This is an innovative application of WFA in the livestock sector and supports the development of Muyuan's corporate water

  9. Carbon footprints of cities and other human settlements in the UK

    International Nuclear Information System (INIS)

    Minx, Jan; Pichler, Peter-Paul; Weisz, Helga; Baiocchi, Giovanni; Wiedmann, Thomas; Barrett, John; Creutzig, Felix; Feng, Kuishuang; Hubacek, Klaus; Förster, Michael

    2013-01-01

    A growing body of literature discusses the CO 2 emissions of cities. Still, little is known about emission patterns across density gradients from remote rural places to highly urbanized areas, the drivers behind those emission patterns and the global emissions triggered by consumption in human settlements—referred to here as the carbon footprint. In this letter we use a hybrid method for estimating the carbon footprints of cities and other human settlements in the UK explicitly linking global supply chains to local consumption activities and associated lifestyles. This analysis comprises all areas in the UK, whether rural or urban. We compare our consumption-based results with extended territorial CO 2 emission estimates and analyse the driving forces that determine the carbon footprint of human settlements in the UK. Our results show that 90% of the human settlements in the UK are net importers of CO 2 emissions. Consumption-based CO 2 emissions are much more homogeneous than extended territorial emissions. Both the highest and lowest carbon footprints can be found in urban areas, but the carbon footprint is consistently higher relative to extended territorial CO 2 emissions in urban as opposed to rural settlement types. The impact of high or low density living remains limited; instead, carbon footprints can be comparatively high or low across density gradients depending on the location-specific socio-demographic, infrastructural and geographic characteristics of the area under consideration. We show that the carbon footprint of cities and other human settlements in the UK is mainly determined by socio-economic rather than geographic and infrastructural drivers at the spatial aggregation of our analysis. It increases with growing income, education and car ownership as well as decreasing household size. Income is not more important than most other socio-economic determinants of the carbon footprint. Possibly, the relationship between lifestyles and infrastructure

  10. Web Transfer Over Satellites Being Improved

    Science.gov (United States)

    Allman, Mark

    1999-01-01

    Extensive research conducted by NASA Lewis Research Center's Satellite Networks and Architectures Branch and the Ohio University has demonstrated performance improvements in World Wide Web transfers over satellite-based networks. The use of a new version of the Hypertext Transfer Protocol (HTTP) reduced the time required to load web pages over a single Transmission Control Protocol (TCP) connection traversing a satellite channel. However, an older technique of simultaneously making multiple requests of a given server has been shown to provide even faster transfer time. Unfortunately, the use of multiple simultaneous requests has been shown to be harmful to the network in general. Therefore, we are developing new mechanisms for the HTTP protocol which may allow a single request at any given time to perform as well as, or better than, multiple simultaneous requests. In the course of study, we also demonstrated that the time for web pages to load is at least as short via a satellite link as it is via a standard 28.8-kbps dialup modem channel. This demonstrates that satellites are a viable means of accessing the Internet.

  11. Sensitivity and uncertainty in crop water footprint accounting: a case study for the Yellow River basin

    Science.gov (United States)

    Zhuo, L.; Mekonnen, M. M.; Hoekstra, A. Y.

    2014-06-01

    Water Footprint Assessment is a fast-growing field of research, but as yet little attention has been paid to the uncertainties involved. This study investigates the sensitivity of and uncertainty in crop water footprint (in m3 t-1) estimates related to uncertainties in important input variables. The study focuses on the green (from rainfall) and blue (from irrigation) water footprint of producing maize, soybean, rice, and wheat at the scale of the Yellow River basin in the period 1996-2005. A grid-based daily water balance model at a 5 by 5 arcmin resolution was applied to compute green and blue water footprints of the four crops in the Yellow River basin in the period considered. The one-at-a-time method was carried out to analyse the sensitivity of the crop water footprint to fractional changes of seven individual input variables and parameters: precipitation (PR), reference evapotranspiration (ET0), crop coefficient (Kc), crop calendar (planting date with constant growing degree days), soil water content at field capacity (Smax), yield response factor (Ky) and maximum yield (Ym). Uncertainties in crop water footprint estimates related to uncertainties in four key input variables: PR, ET0, Kc, and crop calendar were quantified through Monte Carlo simulations. The results show that the sensitivities and uncertainties differ across crop types. In general, the water footprint of crops is most sensitive to ET0 and Kc, followed by the crop calendar. Blue water footprints were more sensitive to input variability than green water footprints. The smaller the annual blue water footprint is, the higher its sensitivity to changes in PR, ET0, and Kc. The uncertainties in the total water footprint of a crop due to combined uncertainties in climatic inputs (PR and ET0) were about ±20% (at 95% confidence interval). The effect of uncertainties in ET0was dominant compared to that of PR. The uncertainties in the total water footprint of a crop as a result of combined key input

  12. Carbon footprint assessment for a local branded pure milk product: a lifecycle based approach

    OpenAIRE

    ZHAO, Rui; XU, Yao; WEN, Xiangyu; ZHANG, Ning; CAI, Jiapei

    2017-01-01

    Abstract This paper provides a simplified life cycle based assessment for a local branded pure milk product, to measure its related carbon footprint, including production of raw milk, dairy processing, transportation of milk product and disposal of packaging waste. The results show that the total carbon footprint of the pure milk is 1120g CO2/L. The production of raw milk is identified as the major contributor to the carbon footprint. This contribution has amounted to 843 g of CO2 per liter o...

  13. Methods for characterizing magnetic footprints of perpendicular magnetic recording writer heads

    International Nuclear Information System (INIS)

    Li, Shaoping; Lin, Ed; George, Zach; Terrill, Dave; Mendez, H.; Santucci, J.; Yie, Derek

    2014-01-01

    In this work, the magnetic footprints, along with some of its dynamic features in recording process, of perpendicular magnetic recording writer heads have been characterized by using three different techniques. Those techniques are the spin-stand stationary footprint technique, the spin-stand dynamic footprint technique, and the coherent writing technique combined with magnetic force microscope imaging method. The characteristics of those techniques have been compared to one another. It was found experimentally that the spin-stand stationary method could not precisely catch some peculiar recording dynamics of the write heads in certain conditions. The advantages and disadvantages among all those techniques are also examined and discussed in detail

  14. New footprints from Laetoli (Tanzania) provide evidence for marked body size variation in early hominins

    OpenAIRE

    Masao, Fidelis T; Ichumbaki, Elgidius B; Cherin, Marco; Barili, Angelo; Boschian, Giovanni; Iurino, Dawid A; Menconero, Sofia; Moggi-Cecchi, Jacopo; Manzi, Giorgio

    2016-01-01

    eLife digest Fossil footprints are extremely useful tools in the palaeontological record. Their physical features can help to identify their makers, but can also be used to infer biological information. How did the track-maker move? How large was it? How fast was it going? Footprints of hominins (namely the group to which humans and our ancestors belong) are pretty rare. Nearly all of the hominin footprints discovered so far are attributed to species of the genus Homo, to which modern humans ...

  15. Chemical footprint: a methodological framework for bridging life cycle assessment and planetary boundaries for chemical pollution.

    Science.gov (United States)

    Sala, Serenella; Goralczyk, Malgorzata

    2013-10-01

    The development and use of footprint methodologies for environmental assessment are increasingly important for both the scientific and political communities. Starting from the ecological footprint, developed at the beginning of the 1990s, several other footprints were defined, e.g., carbon and water footprint. These footprints-even though based on a different meaning of "footprint"-integrate life cycle thinking, and focus on some challenging environmental impacts including resource consumption, CO2 emission leading to climate change, and water consumption. However, they usually neglect relevant sources of impacts, as those related to the production and use of chemicals. This article presents and discusses the need and relevance of developing a methodology for assessing the chemical footprint, coupling a life cycle-based approach with methodologies developed in other contexts, such as ERA and sustainability science. Furthermore, different concepts underpin existing footprint and this could be the case also of chemical footprint. At least 2 different approaches and steps to chemical footprint could be envisaged, applicable at the micro- as well as at the meso- and macroscale. The first step (step 1) is related to the account of chemicals use and emissions along the life cycle of a product, sector, or entire economy, to assess potential impacts on ecosystems and human health. The second step (step 2) aims at assessing to which extent actual emission of chemicals harm the ecosystems above their capability to recover (carrying capacity of the system). The latter step might contribute to the wide discussion on planetary boundaries for chemical pollution: the thresholds that should not be surpassed to guarantee a sustainable use of chemicals from an environmental safety perspective. The definition of what the planetary boundaries for chemical pollution are and how the boundaries should be identified is an on-going scientific challenge for ecotoxicology and ecology. In

  16. Small Earth Observing Satellites Flying with Large Satellites in the A-Train

    Science.gov (United States)

    Kelly, Angelita C.; Loverro, Adam; Case, Warren F.; Queruel, Nadege; Marechal, Chistophe; Barroso, Therese

    2009-01-01

    This paper/poster presents a real-life example of the benefits of flying small satellites with other satellites, large or small, and vice versa. Typically, most small satellites fly payloads consisting of one or two instruments and fly in orbits that are independent from that of other satellites. The science data from these satellites are either used in isolation or correlated with instrument data from other satellites. Data correlation with other satellites is greatly improved when the measurements of the same point or air mass are taken at approximately the same time. Scientists worldwide are beginning to take advantage of the opportunities for improved data correlation, or coincidental science, offered by the international Earth Observing Constellation known as the A-Train (sometimes referred to as the Afternoon Constellation). Most of the A-Train satellites are small - the A-Train is anchored by two large NASA satellites (EOS-Aqua and EOS-Aura), but consists also of 5 small satellites (CloudSat, CALIPSO, PARASOL, OCO and Glory these last two will join in 2009). By flying in a constellation, each mission benefits from coincidental observations from instruments on the other satellites in the constellation. Essentially, from a data point of view, the A-Train can be envisioned as a single, virtual science platform with multiple instruments. Satellites in the A-Train fly at 705 km in sun-synchronous orbits. Their mean local times at the equator are within seconds to a few minutes of each other. This paper describes the challenges of operating an international constellation of independent satellites from the U.S. and Europe to maximize the coincidental science opportunities while at the same time minimizing the level of operational interactions required between team members. The A-Train mission teams have been able to demonstrate that flying as members of an international constellation does not take away the flexibility to accommodate new requirements. Specific

  17. Virtual Satellite Construction and Application for Image Classification

    International Nuclear Information System (INIS)

    Su, W G; Su, F Z; Zhou, C H

    2014-01-01

    Nowadays, most remote sensing image classification uses single satellite remote sensing data, so the number of bands and band spectral width is consistent. In addition, observed phenomenon such as land cover have the same spectral signature, which causes the classification accuracy to decrease as different data have unique characteristic. Therefore, this paper analyzes different optical remote sensing satellites, comparing the spectral differences and proposes the ideas and methods to build a virtual satellite. This article illustrates the research on the TM, HJ-1 and MODIS data. We obtained the virtual band X 0 through these satellites' bands combined it with the 4 bands of a TM image to build a virtual satellite with five bands. Based on this, we used these data for image classification. The experimental results showed that the virtual satellite classification results of building land and water information were superior to the HJ-1 and TM data respectively

  18. OLFAR, a radio telescope based on nano satellites in moon orbit

    NARCIS (Netherlands)

    Engelen, S.; Verhoeven, C.J.M.; Bentum, Marinus Jan

    2010-01-01

    It seems very likely that missions with nano-satellites in professional scientific or commercial applications will not be single-satellite missions. Well structured formations or less structured swarms of nano-satellites will be able to perform tasks that cannot be done in the “traditional‿ way. The

  19. Energy footprint of advanced dense numerical linear algebra using tile algorithms on multicore architectures

    KAUST Repository

    Dongarra, Jack

    2012-11-01

    We propose to study the impact on the energy footprint of two advanced algorithmic strategies in the context of high performance dense linear algebra libraries: (1) mixed precision algorithms with iterative refinement allow to run at the peak performance of single precision floating-point arithmetic while achieving double precision accuracy and (2) tree reduction technique exposes more parallelism when factorizing tall and skinny matrices for solving over determined systems of linear equations or calculating the singular value decomposition. Integrated within the PLASMA library using tile algorithms, which will eventually supersede the block algorithms from LAPACK, both strategies further excel in performance in the presence of a dynamic task scheduler while targeting multicore architecture. Energy consumption measurements are reported along with parallel performance numbers on a dual-socket quad-core Intel Xeon as well as a quad-socket quad-core Intel Sandy Bridge chip, both providing component-based energy monitoring at all levels of the system, through the Power Pack framework and the Running Average Power Limit model, respectively. © 2012 IEEE.

  20. Universal internucleotide statistics in full genomes: a footprint of the DNA structure and packaging?

    Directory of Open Access Journals (Sweden)

    Mikhail I Bogachev

    Full Text Available Uncovering the fundamental laws that govern the complex DNA structural organization remains challenging and is largely based upon reconstructions from the primary nucleotide sequences. Here we investigate the distributions of the internucleotide intervals and their persistence properties in complete genomes of various organisms from Archaea and Bacteria to H. Sapiens aiming to reveal the manifestation of the universal DNA architecture. We find that in all considered organisms the internucleotide interval distributions exhibit the same [Formula: see text]-exponential form. While in prokaryotes a single [Formula: see text]-exponential function makes the best fit, in eukaryotes the PDF contains additionally a second [Formula: see text]-exponential, which in the human genome makes a perfect approximation over nearly 10 decades. We suggest that this functional form is a footprint of the heterogeneous DNA structure, where the first [Formula: see text]-exponential reflects the universal helical pitch that appears both in pro- and eukaryotic DNA, while the second [Formula: see text]-exponential is a specific marker of the large-scale eukaryotic DNA organization.

  1. Development of Ecological Footprint to an Essential Economic and Political Tool

    Directory of Open Access Journals (Sweden)

    Hans P. Aubauer

    2011-04-01

    Full Text Available This paper shows how the concept of the Ecological Footprint can be developed by incorporating the six procedures listed below, to create a single indicator of just distribution of the limited natural resources, between and within generations, and become a benchmark for decision-making between alternatives of consumption, life-styles and economic policies. Using this new tool, it should be possible to label every commodity, service and natural resource with the share it claims of the Earth’s surface. This, in turn, can enable the integration of natural limits into the economy through the complete internalization of costs within market prices, while also reducing resource throughput fairly and quickly without an undue loss in GNP. The six procedures are as follows: First, operating within the boundaries of the sustainable local yields of the biologically productive soil and water areas, without any input of non-renewable resources, particularly fossil fuels; Second, taking spatial variations of this yield into account; Third, considering only sustainable CO2-sinks; Fourth, including every exploitation of nature, for instance all material flows; Fifth, taking care of intertemporal effects and depletion; and sixth, preserving the natural habitats necessary for the survival of biodiversity, bearing the species/area relationship in mind.

  2. Satellite broadcasting - The European experience and perspective

    Science.gov (United States)

    Watson, Alan

    1991-11-01

    The use of satellites is considered as a means for developing a European transnational broadcasting system with attention given to the control of technology. A tension is described between maintaining technology as the property of one nation when the DBSs are developed for multinational program broadcasting. The simultaneous development of satellite systems is theorized to lead eventually to a single merged program for a particular nation, and the effect is considered of the regulation of cross-holding and cross-selling systems by investors.

  3. Overview of commercial satellite communications

    Science.gov (United States)

    Beakley, G. W.

    1984-07-01

    A brief history of communications satellites is presented, taking into account the launching of Sputnik 1 in October 1957, the Explorer 1 in January of 1958, the launch of the Score as the world's first active communications satellite in December 1958, the Communications Satellite Act in 1962, and the launch of 'Early Bird' in 1964. The Intelsat satellites are considered along with maritime satellite communications, the U.S. domestic satellite systems, Alaskan satellite communications, cable television, broadcast TV stations, print media, the hotel/motel industry as a large market for satellite communications terminals, the opening of a minicable and satellite master antenna TV market for TV receive-only systems, and business telecommunications earth terminals. Attention is also given to future directions regarding satellite positions, the concept of 'video-plus', and direct broadcast satellites.

  4. Advanced mobile satellite communications system using Ka and MM-wave bands in Japan's R and D satellite project

    Science.gov (United States)

    Isobe, Shunkichi; Ohmori, Shingo; Hamamoto, Naokazu; Yamamoto, Minoru

    1991-01-01

    Communications Research Laboratory (CRL) studied an advanced mobile satellite communications system using Ka and millimeter-wave bands in the R&D Satellite project. The project started in 1990 and the satellite will be launched in 1997. On-board multi-beam interconnecting is one of basic functions to realize one-hop connection among Very Small Aperture Terminals (VSATs), mobile, and hand-held terminals in future mobile satellite communications system. An Intermediate Frequency (IF) filter bank and regenerative transponder are suitable for this function. The transponder configuration of an advanced mobile communications mission of the R&D Satellite for experiment is shown. High power transmitters of Ka and millimeter-wave bands, a 3x3 IF filter band and Single Channel Per Carrier/Time Division Multiplexing (SCPC/TDM) regenerative MODEMS, which will be boarded on the R&D Satellite, are being developed for the purpose of studying the feasibility of advanced mobile communications system.

  5. Comparison of Multiple Satellite Soil Moisture Products Using In-Situ Soil Moisture Observations Over the Continental United States

    Science.gov (United States)

    Chavez, N.; Galvan, J., III; McRoberts, D. B.; Quiring, S. M.; Ford, T.

    2015-12-01

    We evaluate the skill of multiple satellite-derived soil moisture products using in-situ soil moisture observations from over 50 long-record stations in the continental United States. The satellite products compared include AMSR-E, ASCAT, SMOS, TMI, ESA CCI, and SMAP. Daily volumetric water content and percentiles of volumetric water content from each satellite product is compared with the observations from the corresponding station. We evaluate the similarity between the satellite and in-situ products with regard to the climate and biome conditions of the area as well as the representativeness of the in-situ station for the satellite footprint. We find moderate-to-strong correspondence between all satellite products and in-situ soil moisture observations. Differences between the satellite and observation datasets are attributed to varying land cover conditions, snow cover, and the spatial mismatch of the point observation with the satellite product grid cell. In general, our results suggest that the satellite products evaluated can accurately capture temporal variability of soil moisture near the surface, but do show systematic offsets at several stations across the study region.

  6. Temporal variability of green and blue water footprint worldwide

    Science.gov (United States)

    Tamea, Stefania; Lomurno, Marianna; Tuninetti, Marta; Laio, Francesco; Ridolfi, Luca

    2016-04-01

    Water footprint assessment is becoming widely used in the scientific literature and it is proving useful in a number of multidisciplinary contexts. Given this increasing popularity, measures of green and blue water footprint (or virtual water content, VWC) require evaluations of uncertainty and variability to quantify the reliability of proposed analyses. As of today, no studies are known to assess the temporal variability of crop VWC at the global scale; the present contribution aims at filling this gap. We use a global high-resolution distributed model to compute the VWC of staple crops (wheat and maize), basing on the soil water balance, forced by hydroclimatic imputs, and on the total crop evapotranspiration in multiple growing seasons. Crop actual yield is estimated using country-based yield data, adjusted to account for spatial variability, allowing for the analysis of the different role played by climatic and management factors in the definition of crop yield. The model is then run using hydroclimatic data, i.e., precipitation and potential evapotranspiration, for the period 1961-2013 as taken from the CRU database (CRU TS v. 3.23) and using the corresponding country-based yield data from FAOSTAT. Results provide the time series of total evapotranspiration, actual yield and VWC, with separation between green and blue VWC, and the overall volume of water used for crop production, both at the cell scale (5x5 arc-min) and aggregated at the country scale. Preliminary results indicate that total (green+blue) VWC is, in general, weekly dependent on hydroclimatic forcings if water for irrigation is unlimited, because irrigated agriculture allows to compensate temporary water shortage. Conversely, most part of the VWC variability is found to be determined by the temporal evolution of crop yield. At the country scale, the total water used by countries for agricultural production has seen a limited change in time, but the marked increase in the water-use efficiency

  7. Integrating Ecological and Water Footprint Accounting in a Multi-Regional Input-Output Framework

    Science.gov (United States)

    Carbon, ecological, and water footprints (CF, EF, and WF) are accounting tools that can be used to understand the connection between consumption activities and environmental pressures on the Earth?s atmosphere, bioproductive areas, and freshwater resources. These indicators have ...

  8. Online purchasing creates opportunities to lower the life cycle carbon footprints of consumer products.

    Science.gov (United States)

    Isley, Steven C; Stern, Paul C; Carmichael, Scott P; Joseph, Karun M; Arent, Douglas J

    2016-08-30

    A major barrier to transitions to environmental sustainability is that consumers lack information about the full environmental footprints of their purchases. Sellers' incentives do not support reducing the footprints unless customers have such information and are willing to act on it. We explore the potential of modern information technology to lower this barrier by enabling firms to inform customers of products' environmental footprints at the point of purchase and easily offset consumers' contributions through bundled purchases of carbon offsets. Using online stated choice experiments, we evaluated the effectiveness of several inexpensive features that firms in four industries could implement with existing online user interfaces for consumers. These examples illustrate the potential for firms to lower their overall carbon footprints while improving customer satisfaction by lowering the "soft costs" to consumers of proenvironmental choices. Opportunities such as these likely exist wherever firms possess environmentally relevant data not accessible to consumers or when transaction costs make proenvironmental action difficult.

  9. FOOTPRINT: A Screening Model for Estimating the Area of a Plume Produced From Gasoline Containing Ethanol

    Science.gov (United States)

    FOOTPRINT is a screening model used to estimate the length and surface area of benzene, toluene, ethylbenzene, and xylene (BTEX) plumes in groundwater, produced from a gasoline spill that contains ethanol.

  10. Pre-ABoVE: Arctic Vegetation Plots in Flux Tower Footprints, North Slope Alaska, 2014

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides vegetation, environmental, and soil data collected from plots located in the footprints of eddy covariance flux towers along a 300 km...

  11. Last of the Wild Project, Version 1, 2002 (LWP-1): Global Human Footprint Dataset (Geographic)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Human Footprint Dataset of the Last of the Wild Project, Version 1, 2002 (LWP-1) is the Human Influence Index (HII) normalized by biome and realm. The HII...

  12. Last of the Wild Project, Version 1, 2002 (LWP-1): Global Human Footprint Dataset (IGHP)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Human Footprint Dataset of the Last of the Wild Project, Version 1, 2002 (LWP-1) is the Human Influence Index (HII) normalized by biome and realm. The HII...

  13. Last of the Wild Project, Version 2, 2005 (LWP-2): Global Human Footprint Dataset (Geographic)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Human Footprint Dataset of the Last of the Wild Project, Version 2, 2005 (LWP-2) is the Human Influence Index (HII) normalized by biome and realm. The HII...

  14. Last of the Wild Project, Version 2, 2005 (LWP-2): Global Human Footprint Dataset (IGHP)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Human Footprint Dataset of the Last of the Wild Project, Version 2, 2005 (LWP-2) is the Human Influence Index (HII) normalized by biome. The HII is a...

  15. MESSENGER H XRS 5 REDUCED DATA RECORD (RDR) FOOTPRINTS V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — Abstract ======== This data set consists of the MESSENGER XRS reduced data record (RDR) footprints which are derived from the navigational meta-data for each...

  16. Maintaining a stationary laser footprint during angular scan in internal-reflection experiments.

    Science.gov (United States)

    Fontana, Eduardo; Cavalcanti, Gustavo Oliveira

    2013-11-10

    In internal-reflection metrology using prisms, the prism is usually mounted on a rotation/translation stage to enable adjusting angle and location of the laser footprint on the surface. If a visual inspection method is used to find the laser footprint, the task becomes impossible if invisible radiation in the near infrared is employed. In addition, it may be desirable to perform angular scan experiments with a stationary footprint on the surface during scans, or even to automatically probe specific points on an extended prism face for predetermined incidence angles. In this paper, a formulation is developed to determine the required translation along the prism face to allow maintaining the laser footprint stationary under a given rotation. A web-based app developed under the scope of this work demonstrates the applicability of the approach for silica, BK7 and SF2 glasses, in the wavelength range from 500 to 1500 nm and for an arbitrary geometry of the glass prism.

  17. Online purchasing creates opportunities to lower the life cycle carbon footprints of consumer products

    Science.gov (United States)

    Isley, Steven C.; Stern, Paul C.; Carmichael, Scott P.; Joseph, Karun M.; Arent, Douglas J.

    2016-01-01

    A major barrier to transitions to environmental sustainability is that consumers lack information about the full environmental footprints of their purchases. Sellers’ incentives do not support reducing the footprints unless customers have such information and are willing to act on it. We explore the potential of modern information technology to lower this barrier by enabling firms to inform customers of products’ environmental footprints at the point of purchase and easily offset consumers’ contributions through bundled purchases of carbon offsets. Using online stated choice experiments, we evaluated the effectiveness of several inexpensive features that firms in four industries could implement with existing online user interfaces for consumers. These examples illustrate the potential for firms to lower their overall carbon footprints while improving customer satisfaction by lowering the “soft costs” to consumers of proenvironmental choices. Opportunities such as these likely exist wherever firms possess environmentally relevant data not accessible to consumers or when transaction costs make proenvironmental action difficult. PMID:27528670

  18. Impacts of software and its engineering on the carbon footprint of ICT

    International Nuclear Information System (INIS)

    Kern, Eva; Dick, Markus; Naumann, Stefan; Hiller, Tim

    2015-01-01

    The energy consumption of information and communication technology (ICT) is still increasing. Even though several solutions regarding the hardware side of Green IT exist, the software contribution to Green IT is not well investigated. The carbon footprint is one way to rate the environmental impacts of ICT. In order to get an impression of the induced CO 2 emissions of software, we will present a calculation method for the carbon footprint of a software product over its life cycle. We also offer an approach on how to integrate some aspects of carbon footprint calculation into software development processes and discuss impacts and tools regarding this calculation method. We thus show the relevance of energy measurements and the attention to impacts on the carbon footprint by software within Green Software Engineering

  19. Area of Concern: a new paradigm in life cycle assessment for the development of footprint metrics

    Science.gov (United States)

    Purpose: As a class of environmental metrics, footprints have been poorly defined, have shared an unclear relationship to life cycle assessment (LCA), and the variety of approaches to quantification have sometimes resulted in confusing and contradictory messages in the marketplac...

  20. GHG emissions of green coffee production : toward a standard methodology for carbon footprinting : report

    NARCIS (Netherlands)

    Sevenster, M.; Verhagen, A.

    2010-01-01

    In this project, the scope for product specific rules for carbon footprinting of (green) coffee is investigated and a proposal is drafted for further work toward actual definition and implementation of such a standard.

  1. Compendium of Environmental Sustainability Indicator Collections: 2006 National Footprint Accounts (NFA)

    Data.gov (United States)

    National Aeronautics and Space Administration — The 2006 National Footprint Accounts (NFA) portion of the Compendium of Environmental Sustainability Indicator Collections, version 1.1 is a data set that measures...

  2. Impacts of software and its engineering on the carbon footprint of ICT

    Energy Technology Data Exchange (ETDEWEB)

    Kern, Eva, E-mail: e.kern@umwelt-campus.de [Institute for Software Systems, Environmental Campus Birkenfeld, Campusallee, D-55761 Birkenfeld (Germany); Dick, Markus, E-mail: sustainablesoftwareblog@gmail.com [Fritz-Wunderlich-Straße 14, D-66869 Kusel (Germany); Naumann, Stefan, E-mail: s.naumann@umwelt-campus.de [Institute for Software Systems, Environmental Campus Birkenfeld, Campusallee, D-55761 Birkenfeld (Germany); Hiller, Tim, E-mail: tim.hiller@gmx.com [Institute for Software Systems, Environmental Campus Birkenfeld, Campusallee, D-55761 Birkenfeld (Germany)

    2015-04-15

    The energy consumption of information and communication technology (ICT) is still increasing. Even though several solutions regarding the hardware side of Green IT exist, the software contribution to Green IT is not well investigated. The carbon footprint is one way to rate the environmental impacts of ICT. In order to get an impression of the induced CO{sub 2} emissions of software, we will present a calculation method for the carbon footprint of a software product over its life cycle. We also offer an approach on how to integrate some aspects of carbon footprint calculation into software development processes and discuss impacts and tools regarding this calculation method. We thus show the relevance of energy measurements and the attention to impacts on the carbon footprint by software within Green Software Engineering.

  3. Multiple Satellite Trajectory Optimization

    National Research Council Canada - National Science Library

    Mendy Jr, Paul B

    2004-01-01

    This thesis develops and validates a satellite trajectory optimization model. A summary is given of the general mathematical principles of dynamic optimal control to minimize fuel consumed or transfer time...

  4. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  5. Virophages or satellite viruses?

    Science.gov (United States)

    Krupovic, Mart; Cvirkaite-Krupovic, Virginija

    2011-11-01

    It has been argued that the smaller viruses associated with giant DNA viruses are a new biological entity. However, Mart Krupovic and Virginija Cvirkaite-Krupovic argue here that these smaller viruses should be classified with the satellite viruses.

  6. Domestic Communication Satellites

    Science.gov (United States)

    Horowitz, Andrew

    1974-01-01

    A discussion of the Federal Communications Commission's new policy on domestic satellites in light of our 1) military and economic history; 2) corporate interests; 3) citizen surveillance; and 4) media control. (HB)

  7. SATELLITE CONSTELLATION DESIGN PARAMETER

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. SATELLITE CONSTELLATION DESIGN PARAMETER. 1. ORBIT CHARACTERISTICS. ORBITAL HEIGHT >= 20,000 KM. LONGER VISIBILITY; ORBITAL PERIOD. PERTURBATIONS(MINIMUM). SOLAR RADIATION PRESSURE (IMPACTS ECCENTRICITY); LUNI ...

  8. Small Satellite Transporter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The primary objective is to determine whether this small satellite transporter is capable of transporting at least four 6U CubeSats is possible for a given set of...

  9. Personal Water Footprint in Taiwan: A Case Study of Yunlin County

    Directory of Open Access Journals (Sweden)

    Yung-Jaan Lee

    2016-10-01

    Full Text Available Extreme weather events have affected the environment and water resources in Taiwan for the last two decades. Heavy rainfall, typhoons, and rising sea levels have caused severe flooding along the Southwest Coast in Taiwan. Yunlin County, an important agricultural region, will be significantly affected by climate changes, especially in coastal areas with severe land subsidence. Therefore, using the concept of the water footprint and questionnaire surveys, this study examines personal water footprints in townships in Yunlin County to explore the effectiveness and sustainability of water management. The purpose of the water footprint concept is to quantify environmental burdens imposed by individuals’ demand for water. An individual water footprint involves direct and indirect water usage that is associated with personal habits. Analytical results show that the most individual water consumption is highest along coastal areas, such as Kouhu and Taixi, and mountainous areas, such as Gukeng, Douliu, and Linnei. Furthermore, one-way ANOVA of individuals’ daily water footprint reveals that individual water footprints vary significantly among Douliu, Gukeng, and Mailiao. The mean daily water footprint per capita in Douliu and Gukeng significantly exceeds that in Mailiao. This study considers the location quotients of industries in these three townships, which indicate that the location quotients of the accommodation and food and beverage industries in Douliu and Gukeng significantly exceed those of Mailiao. The individual virtual water use that is associated with the aforementioned industries is large. Clearly, individual water use habits in townships are related to the industry type. Douliu and Gukeng are major centers of the tertiary industry, which has a higher location quotient than in Mailiao. Mailiao is a major center of manufacturing as a secondary industry. Therefore, flourishing regions with tertiary industries have high virtual water

  10. Carbon footprint of the rice (Oryza sativa) production system in the municipality of Campoalegre, Huila, Colombia

    OpenAIRE

    Hernán J. Andrade; Oswald Campo; Milena Segura

    2014-01-01

    Carbon footprint is a useful tool to estimate the impact of any production system on climate change, specifically in the net emission or fixation of greenhouse gasses (GHG). The rice cropping system has a large food, social and economical importance in the world; however, it is a net GHG-emitting productive system. The objective of this study was estimating the carbon footprint of the rice production in Campoalegre, Huila, Colombia. A total of 21 rice producti...

  11. Decomposition of the Urban Water Footprint of Food Consumption: A Case Study of Xiamen City

    Directory of Open Access Journals (Sweden)

    Jiefeng Kang

    2017-01-01

    Full Text Available Decomposition of the urban water footprint can provide insight for water management. In this paper, a new decomposition method based on the log-mean Divisia index model (LMDI was developed to analyze the driving forces of water footprint changes, attributable to food consumption. Compared to previous studies, this new approach can distinguish between various factors relating to urban and rural residents. The water footprint of food consumption in Xiamen City, from 2001 to 2012, was calculated. Following this, the driving forces of water footprint change were broken down into considerations of the population, the structure of food consumption, the level of food consumption, water intensity, and the population rate. Research shows that between 2001 and 2012, the water footprint of food consumption in Xiamen increased by 675.53 Mm3, with a growth rate of 88.69%. Population effects were the leading contributors to this change, accounting for 87.97% of the total growth. The food consumption structure also had a considerable effect on this increase. Here, the urban area represented 94.96% of the water footprint increase, driven by the effect of the food consumption structure. Water intensity and the urban/rural population rate had a weak positive cumulative effect. The effects of the urban/rural population rate on the water footprint change in urban and rural areas, however, were individually significant. The level of food consumption was the only negative factor. In terms of food categories, meat and grain had the greatest effects during the study period. Controlling the urban population, promoting a healthy and less water-intensive diet, reducing food waste, and improving agriculture efficiency, are all elements of an effective approach for mitigating the growth of the water footprint.

  12. Carbon Footprint of Water Embedded in Agricultural Products Exported from California

    OpenAIRE

    Li, Dongfeng

    2014-01-01

    The carbon footprint of embedded water in California's agricultural products has not been thoroughly studied before. However, related topics have been on the table to solve the sustainable development problems. This research tries to find out the energy consumption of the water embedded in the exported agricultural products from California. It also aims to figure out the nation scale distribution of the carbon footprint that was studied in this research. The results show that the water footp...

  13. Symmetry of healthy adult feet: role of orthostatic footprint at computerized baropodometry and of digital formula.

    Science.gov (United States)

    Ridola, C; Palma, A; Cappello, F; Gravante, G; Russo, G; Truglio, G; Pomara, F; Amato, G

    2001-01-01

    Morphological aspects of orthostatic footprints (anterior heel, isthmus, posterior heel), using computerized baropodometry and of the digital formula were studied in 97 subjects (37 males, 60 females; median age: 20.9+/-1.56) at the Medical School of Palermo, Italy. The aim of this study was to contribute to our knowledge of the bilateral symmetry and asymmetry of the human feet in ethnically similar groups. We evaluated the length of the footprints (FL) and the widths of the anterior heel (AHW), isthmus (IW), and the posterior heel (PHW). Values were compared in the left and right feet of each subjects. The general morphology of the footprints was considered to determine bilateral correspondence or divergence. We also evaluated the digital formula to verify any bilateral correspondence. The linear measurements of the footprints did not show any particular bilateral conformity. The general morphology of the footprint showed bilateral correspondence in 76 subjects (78%): in 21 subjects (22%) it did not show any. Typological results of the bilateral orthostatic footprints showed normalfootprints in 54 subjects (55.5%): the isthmus included 1/3 to 2/3 of the AHW. Hollow footprints were found in 20 subjects (20.5%): the isthmus was less than 1/3 of the AHW. At clinical examination, using the digital formula, we found that Egyptian foot (1 degree > 2 degrees) was the most frequent (68%). The standard foot (1 degree = 2 degrees) and the Greek foot (1 degree digital formulas: 1 degree > 2 degrees in 59 subjects (62%), 1 degree = 2 degrees in 9 subjects (9%), and 1 degree footprints and of the digital formulas showed that bilateral correspondence was prevalent.

  14. [Preliminary study on ecological footprint in Bashang region of Zhangjiakou city].

    Science.gov (United States)

    Hu, Mengchun; Zhang, Yongchun; Miao, Xubo; Shen, Weishou; Ma, Ronghua

    2003-02-01

    The ecological footprint and ecological carrying capacity in Bashang region of Zhangjiakou city were calculated with the statistical data of the region in 1999. Based on calculation, the balance between ecological footprint and ecological carrying capacity was analyzed, and the threshold values of the ecological carrying capacity and population capacity of the region at the current production level were determined. Strategies on reducing ecological deficit in this region were also brought forward.

  15. Three-dimensional analysis of elbow soft tissue footprints and anatomy.

    Science.gov (United States)

    Capo, John T; Collins, Christopher; Beutel, Bryan G; Danna, Natalie R; Manigrasso, Michaele; Uko, Linda A; Chen, Linda Y

    2014-11-01

    Tendinous and ligamentous injuries commonly occur in the elbow. This study characterized the location, surface areas, and origin and insertional footprints of major elbow capsuloligamentous and tendinous structures in relation to bony landmarks with the use of a precision 3-dimensional modeling system. Nine unpaired cadaveric elbow specimens were dissected and mounted on a custom jig. Mapping of the medial collateral ligament (MCL), lateral ulnar collateral ligament (LUCL), triceps, biceps, brachialis, and capsular reflections was then performed with 3-dimensional digitizing technology. The location, surface areas, and footprints of the soft tissues were calculated. The MCL had a mean origin (humeral) footprint of 216 mm(2), insertional footprint of 154 mm(2), and surface area of 421 mm(2). The LUCL had a mean origin footprint of 136 mm(2), an insertional footprint of 142 mm(2), and a surface area of 532 mm(2). Of the tendons, the triceps maintained the largest insertional footprint, followed by the brachialis and the biceps (P < .001-.03). The MCL, LUCL, and biceps footprint locations were consistent, with little variability. The surface areas of the anterior (1251 mm(2)) and posterior (1147 mm(2)) capsular reflections were similar (P = .82), and the anterior capsule extended farther proximally. Restoring the normal anatomy of key elbow capsuloligamentous and tendinous structures is crucial for effective reconstruction after bony or soft tissue trauma. This study provides the upper extremity surgeon with information that may aid in restoring elbow biomechanics and preserving range of motion in these patients. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  16. ASTRID II satellit projekt

    DEFF Research Database (Denmark)

    Jørgensen, John Leif; Primdahl, Fritz

    1997-01-01

    The report describes the instruments developed for the Swedish micro satellite "ASTRID II". Specifications of the two instruments realized under this contract, a Stellar Compass and a CSC magnetometer are given follwed by a description of the project status and plan.......The report describes the instruments developed for the Swedish micro satellite "ASTRID II". Specifications of the two instruments realized under this contract, a Stellar Compass and a CSC magnetometer are given follwed by a description of the project status and plan....

  17. A method to measure paddle and detector pressures and footprints in mammography

    International Nuclear Information System (INIS)

    Hogg, Peter; Szczepura, Katy; Darlington, Alison; Maxwell, Anthony

    2013-01-01

    Purpose: Compression is necessary in mammography to improve image quality and reduce radiation burden. Maximizing the amount of breast in contact with the image receptor (IR) is important. To achieve this, for the craniocaudal projection, there is no consensus within the literature regarding how the IR should be positioned relative to the inframammary fold (IMF). No information exists within the literature to describe how pressure balancing between IR and paddle, and IR breast footprint, might be optimized. This paper describes a novel method for measuring the respective pressures applied to the breast from the IR and the paddle and a method to simultaneously measure the breast footprints on the IR and the paddle. Methods: Using a deformable breast phantom and electronic pressure-sensitive mat, area and pressure readings were gathered from two mammography machines and four paddles at 60, 80, and 100 N with the IR positioned at −2, −1, 0, +1, and +2 cm relative to the IMF (60 combinations in total). Results: Paddle and IR footprints were calculated along with a uniformity index (UI). For all four paddle/machine/pressure combinations the greatest IR footprint was achieved at IMF +2 cm. The UI indicates that the best pressure/footprint balance is achieved at IMF +1 cm. Conclusions: The authors’ method appears to be suited to measuring breast footprints and pressures on IR and paddle and a human female study is planned.

  18. Research on the influencing factors of reverse logistics carbon footprint under sustainable development.

    Science.gov (United States)

    Sun, Qiang

    2017-10-01

    With the concerns of ecological and circular economy along with sustainable development, reverse logistics has attracted the attention of enterprise. How to achieve sustainable development of reverse logistics has important practical significance of enhancing low carbon competitiveness. In this paper, the system boundary of reverse logistics carbon footprint is presented. Following the measurement of reverse logistics carbon footprint and reverse logistics carbon capacity is provided. The influencing factors of reverse logistics carbon footprint are classified into five parts such as intensity of reverse logistics, energy structure, energy efficiency, reverse logistics output, and product remanufacturing rate. The quantitative research methodology using ADF test, Johansen co-integration test, and impulse response is utilized to interpret the relationship between reverse logistics carbon footprint and the influencing factors more accurately. This research finds that energy efficiency, energy structure, and product remanufacturing rate are more capable of inhibiting reverse logistics carbon footprint. The statistical approaches will help practitioners in this field to structure their reverse logistics activities and also help academics in developing better decision models to reduce reverse logistics carbon footprint.

  19. Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family.

    Science.gov (United States)

    Zhao, Jing; Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

    2018-02-01

    The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index ( EPI ), the ecological occupancy index ( EOI ), the ecological economic coordination index ( EECI ), the GHG (Greenhouse Gas) emission index ( CEI ), the water resources stress index ( WSI ), and the sustainable development index ( SDI ). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions.

  20. Driving force analysis of the agricultural water footprint in China based on the LMDI method.

    Science.gov (United States)

    Zhao, Chunfu; Chen, Bin

    2014-11-04

    China's water scarcity problems have become more severe because of the unprecedented economic development and population explosion. Considering agriculture's large share of water consumption, obtaining a clear understanding of Chinese agricultural consumptive water use plays a key role in addressing China's water resource stress and providing appropriate water mitigation policies. We account for the Chinese agricultural water footprint from 1990 to 2009 based on bottom up approach. Then, the underlying driving forces are decomposed into diet structure effect, efficiency effect, economic activity effect, and population effect, and analyzed by applying a log-mean Divisia index (LMDI) model. The results reveal that the Chinese agricultural water footprint has risen from the 94.1 Gm3 in 1990 to 141 Gm3 in 2009. The economic activity effect is the largest positive contributor to promoting the water footprint growth, followed by the population effect and diet structure effect. Although water efficiency improvement as a significant negative effect has reduced overall water footprint, the water footprint decline from water efficiency improvement cannot compensate for the huge increase from the three positive driving factors. The combination of water efficiency improvement and dietary structure adjustment is the most effective approach for controlling the Chinese agricultural water footprint's further growth.