Petersen, Mads Dines; Knudstrup, Mary-Ann
The research presented here takes its point of departure in the design process with a specific focus on how it is approached when designing energy efficient architecture. This is done through a case-study of a design process in a Danish architectural office. This study shows the importance...
Andersen, Mads Schaarup
system called Opus, are outlined. Opus BRS is the identity management part of Opus. Opus integrates SAP, legacy mainframe systems, and other third party systems of the individual municipality. Each of these systems define their own software architecture and access control model, leading to architectural......Integrating Commercial Off-The-Shelf products in a company's software product portfolio offers business value, but introduces challenges from a software architecture perspective. In this paper, the research challenges in relation to identity management in the Danish municipality administration...
Pugnale, Alberto; Parigi, Dario
This paper discusses teaching of technical subjects in architecture, presenting two experimental activities, recently organized at Aalborg University - a two week long workshop and a one day long lecture. From the pedagogical point of view, the activities are strategically placed between conventi......This paper discusses teaching of technical subjects in architecture, presenting two experimental activities, recently organized at Aalborg University - a two week long workshop and a one day long lecture. From the pedagogical point of view, the activities are strategically placed between...
As discussed in the report we are releasing today, our work to review agency actions to ensure that recipients take timely and appropriate corrective actions to fix audit findings contained in single...
Full Text Available Abstract Very long instruction word- (VLIW- based processors have become widely adopted as a basic building block in modern System-on-Chip designs. Advances in clustered VLIW architectures have extended the scalability of the VLIW architecture paradigm to a large number of functional units and very-wide-issue widths. A central challenge with wide-issue clustered VLIW architecture is the availability of programming and automated compiler methods that can fully utilize the available computational resources. Existing compilation approaches for clustered-VLIW architectures are based on extensions of previously developed scheduling algorithms that primarily focus on the maximization of instruction-level parallelism (ILP. However, many applications do not have sufficient ILP to fully utilize a large number of functional units. On the other hand, many applications in digital communications and multimedia processing exhibit enormous amounts of data-level parallelism (DLP. For these applications, the streaming programming paradigm has been developed to explicitly expose coarse-grained data-level parallelism as well as the locality of communication between coarse-grained computation kernels. In this paper, we investigate the mapping of stream programs to wide-issue clustered VLIW processors. Our work enables designers to leverage their existing investments in VLIW-based architecture platforms to harness the advantages of the stream programming paradigm.
Full Text Available Very long instruction word- (VLIW- based processors have become widely adopted as a basic building block in modern System-on-Chip designs. Advances in clustered VLIW architectures have extended the scalability of the VLIW architecture paradigm to a large number of functional units and very-wide-issue widths. A central challenge with wide-issue clustered VLIW architecture is the availability of programming and automated compiler methods that can fully utilize the available computational resources. Existing compilation approaches for clustered-VLIW architectures are based on extensions of previously developed scheduling algorithms that primarily focus on the maximization of instruction-level parallelism (ILP. However, many applications do not have sufficient ILP to fully utilize a large number of functional units. On the other hand, many applications in digital communications and multimedia processing exhibit enormous amounts of data-level parallelism (DLP. For these applications, the streaming programming paradigm has been developed to explicitly expose coarse-grained data-level parallelism as well as the locality of communication between coarse-grained computation kernels. In this paper, we investigate the mapping of stream programs to wide-issue clustered VLIW processors. Our work enables designers to leverage their existing investments in VLIW-based architecture platforms to harness the advantages of the stream programming paradigm.
Cass R. Sunstein's book The Ethics of Influence appears to have three ideological features notable for purposes of this essay. The book emphasizes choice architecture (and related notions such as nudges and defaults), which should be ethically scrutinized to guard against ethical abuses and to assist us in ethically desirable uses of scientific psychology and behavioral economics. (1) This particular book focuses more on scrutinizing nation-state government than on corporate activities. (2) This book focuses more on domestically directed governmental action than on externally directed governmental action. (3) This book focuses more on certain developed liberal democracies than on the more comprehensive global situation. Sunstein is especially interested in environmental issues, particularly energy policy, global warming, and climate change. This essay argues that Sunstein's conceptual scheme can be fruitfully expanded to progress toward a normative environmental ethics that can be integrated with the insights of global political economy.
Empirical computations require dynamic allocation because it is impossible to plan in advance which procedures will need to be run. Artificial intelligence applications require...consider particular limitations of previously proposed architectures in the context of large-scale parallel artificial intelligence applications . Most of...the limitations stem from the fact that previous architectures were not designed for highly parallel artificial intelligence applications in open
Full Text Available Terazije Terrace in Belgrade and many different architectural projects for this space produced over the last almost 90 years are the subject matter of the analysis. The research is conducted with the aim to recognize and present diverse currents in the development of an architectural scene and shed light on the role of architectural competitions in these complex flows. The 1929-1930 competition won by Nikola Dobrović, as well as the 1968, 1991 and 1998 competitions with the awarded projects are the focal point of the paper as the samples of architectural practice significant for the understanding of the relations between the treatment of “grand architectural themes” and the dominant orientation of a local architectural culture. The theoretical framework refers to contemporary theoretical debate on the autonomy of the discipline (Somol and Whiting, 2002; Aureli, 2008; Hays, 2010; among the others.
Cattoni, Andrea Fabio; Sørensen, Troels Bundgaard; Mogensen, Preben
Wireless communications are a fast grown part of the telecommunication market. While new types of traffic and challenges related to the wireless medium are appearing, the methodologies for designing system architectures are substantially remaining the same. Under the increasing pressure of market...... the traditional protocol stack design methodology. However, Cross Layer also carries a risk due to possibly unexpected and undesired effects. In this chapter we want to provide architecture designers with a set of tools and recommendations synthesized from an analysis of the state of art, but enriched...
Sun, Ning; Zhao, Huimin
Transcription-activator like effector nucleases (TALENs) are tailor-made DNA endonucleases and serve as a powerful tool for genome engineering. Site-specific DNA cleavage can be made by the dimerization of FokI nuclease domains at custom-targeted genomic loci, where a pair of TALENs must be positioned in close proximity with an appropriate orientation. However, the simultaneous delivery and coordinated expression of two bulky TALEN monomers (>100 kDa) in cells may be problematic to implement for certain applications. Here, we report the development of a single-chain TALEN (scTALEN) architecture, in which two FokI nuclease domains are fused on a single polypeptide. The scTALEN was created by connecting two FokI nuclease domains with a 95 amino acid polypeptide linker, which was isolated from a linker library by high-throughput screening. We demonstrated that scTALENs were catalytically active as monomers in yeast and human cells. The use of this novel scTALEN architecture should reduce protein payload, simplify design and decrease production cost.
Full Text Available This essay examines the material ontologies of surgical trans-modifications. Focusing on incisions and subsequent scars, the essay argues for the queering of architecture and design as an act of cutting through structures and processes. I start by rereading a topological body plan, used by surgeons as a guide for performing incisions. I suggest that this plan constitutes a variation within topological representations. It is thus reconceptualised as an internally contradictory representation, calling for dis/continuous cutting acts upon the represented body; that is an amphi-topological representation. The notion of the cut is further approached from the point of view of queer theory and ‘agential realism’. This perspective offers affirmative ways of discussing about acts of cutting. When performed into self-organizing fabrics, cuts appear to act as ‘agents of dis/continuity’. Then, the discussion passes through the genealogy of the architectural section and the building cuts of Gordon Matta Clark, so as to show that the production of buildings by ‘cutting through them to come to matter’ is deep-rooted in the architectural discipline. Next, the philosophical origins of the idea of cutting through the material fabric of the world are sought. It is argued that the latter, beginning as a gnosiological tool, was transformed into a fabricating tool and then into a tool of smoothing the striated. The essay concludes with the presentation of SCARchiCAD; a computational design tool which takes the skin’s wound healing process as a model, offering an interpretation of what the ‘cutting through a virtual form’ could suggest for the design of architectural bodies and the queering of architecture.
Braet, O.; Ballon, P.
Purpose - The paper aims to discuss the business issues surrounding the choice between the end-to-end internet architecture, in particular peer-to-peer networks, versus managed telecommunications architectures, in particular IMS, for the migration towards a next-generation mobile system.
De Amicis, R.; Conti, G.; Girardi, G.; Andreolli, M.
Traditionally, within the field of archaeology and, more generally, within the cultural heritage domain, Geographical Information Systems (GIS) have been mostly used as support to cataloguing activities, essentially operating as gateways to large geo-referenced archives of specialised cultural heritage information. Additionally GIS have proved to be essential to help cultural heritage institutions improve management of their historical information, providing the means for detection of otherwise hard-to-discover spatial patterns, supporting with computation tools necessary to perform spatial clustering, proximity and orientation analysis. This paper presents a platform developed to answer to both the aforementioned issues, by allowing geo-referenced cataloguing of multi-media resources of cultural relevance as well as access, in a user-friendly manner, through an interactive 3D geobrowser which operates as single point of access to the available digital repositories. The solution has been showcased in the context of "Festival dell'economia" (the Fair of Economics) a major event recently occurred in Trento, Italy and it has allowed visitors of the event to interactively access an extremely large repository of information, as well as their metadata, available across the area of the Autonomous Province of Trento, in Italy. Within the event, an extremely large repository was made accessible, via the network, through web-services, from a 3D interactive geobrowser developed by the authors. The 3D scene was enriched with a number of Points of Interest (POIs) linking to information available within various databases. The software package was deployed with a complex hardware set-up composed of a large composite panoramic screen covering a horizontal field of view of 240 degrees.
Historical photographs are proved to be very useful to provide a dimensional and geometrical analysis of buildings as well as to generate 3D reconstruction of the whole structure. The paper addresses the problem of single historical photograph analysis and modelling of an architectural object from it. Especially, it focuses on reconstruction of the original look of New-Town synagogue from the single historic photograph, when camera calibration is completely unknown. Due to the fact that the photograph faithfully followed the geometric rules of perspective, it was possible to develop and apply the method to obtain a correct 3D reconstruction of the building. The modelling process consisted of a series of familiar steps: feature extraction, determination of base elements of perspective, dimensional analyses and 3D reconstruction. Simple formulas were proposed in order to estimate location of characteristic points of the building in 3D Cartesian system of axes on the base of their location in 2D Cartesian system of axes. The reconstruction process proceeded well, although slight corrections were necessary. It was possible to reconstruct the shape of the building in general, and two of its facades in detail. The reconstruction of the other two facades requires some additional information or the additional picture. The success of the presented reconstruction method depends on the geometrical content of the photograph as well as quality of the picture, which ensures the legibility of building edges. The presented method of reconstruction is a combination of the descriptive method of reconstruction and computer aid; therefore, it seems to be universal. It can prove useful for single-image-based modelling architecture.
Tanik, M.M.; Yeh, R.T.; Bieber, M. [New Jersey Inst. of Technology, Newark, NJ (United States)] [and others
Society needs a new class of engineers able to deal with the rapidly changing electronic marketplace. We introduce a new multi-disciplinary field, Electronic Enterprise Engineering (EEE), in which this new class of engineers will function as integrators. We identify objectives for training these engineers. We also outline a preliminary architecture for the EEE program. The appendix introduces a curriculum for training electronic enterprise engineers.
Sinha, Ian P; Sinha, Sunil K
Single-center randomized controlled trials confer certain advantages over multi-center trials, in that they are cheaper and easier to design and conduct. However, recent research suggests that single-center trials are likely to overestimate treatment effects. There are notable examples in neonatology where results from multi-center trials have contradicted results of single-center studies. In this paper we discuss issues around external generalizability of single-center studies, and methodological issues that may cause bias. Copyright © 2015 Elsevier Ltd. All rights reserved.
Issues of control and command in architecture are considered here via reflections on recent and current research projects concerning digital technologies. The projects’ topics cover a range of scales and approaches, from the planning and design of urban ensembles to the detailing of panels for
Full Text Available Over the past decades, global governance has become the most active phenomenon of world politics. From economics to politics, from climate change to international security, global governance became responsible for adjusting the international life in the name of the common good, relying on the power and the influence of the global key players. The aim of this paper is to assess the EU’s contribution to global governance architecture by analyzing the strengths of the EU approach with regard to global governance issues. Firstly, I will analyze the European Union ability to use its monolithic power and its key elements to influence the variables of global governance architecture. Put simply, the analysis looks at the internal governance system of the European Union and its analogue reflections for the global governance system. Secondly, I will limit my attention to three key areas of global governance, and I will adopt an analytical approach to identify and explore the EU practices with regard to: world trade, climate change and international security. In the end, I will discuss the EU performance power to act with a single voice on the entire spectrum of global governance.
When discussing science fiction’s relationship with architecture, the usual practice is to look at the architecture “in” science fiction—in particular, the architecture in SF films (see Kuhn 75-143) since the spaces of literary SF present obvious difficulties as they have to be imagined. In this essay, that relationship will be reversed: I will instead discuss science fiction “in” architecture, mapping out a number of architectural movements and projects that can be viewed explicitly as scien...
Cummings, M. L; Bruni, S; Mercier, S; Mitchell, P. J
.... The OSD Roadmap clearly delineates the need to investigate the "appropriate conditions and requirements under which a single pilot would be allowed to control multiple airborne UA (unmanned aircraft) simultaneously...
Full Text Available Current video-surveillance systems typically consist of many video sources distributed over a wide area, transmitting live video streams to a central location for processing and monitoring. The target of this paper is to present an experience of implementation of a large-scale video-surveillance system based on a wireless mesh network infrastructure, discussing architecture, protocol, and implementation issues. More specifically, the paper proposes an architecture for a video-surveillance system, and mainly centers its focus on the routing protocol to be used in the wireless mesh network, evaluating its impact on performance at the receiver side. A wireless mesh network was chosen to support a video-surveillance application in order to reduce the overall system costs and increase scalability and performance. The paper analyzes the performance of the network in order to choose design parameters that will achieve the best trade-off between video encoding quality and the network traffic generated.
Full Text Available Current video-surveillance systems typically consist of many video sources distributed over a wide area, transmitting live video streams to a central location for processing and monitoring. The target of this paper is to present an experience of implementation of a large-scale video-surveillance system based on a wireless mesh network infrastructure, discussing architecture, protocol, and implementation issues. More specifically, the paper proposes an architecture for a video-surveillance system, and mainly centers its focus on the routing protocol to be used in the wireless mesh network, evaluating its impact on performance at the receiver side. A wireless mesh network was chosen to support a video-surveillance application in order to reduce the overall system costs and increase scalability and performance. The paper analyzes the performance of the network in order to choose design parameters that will achieve the best trade-off between video encoding quality and the network traffic generated.
One of the critical design issues of the LHC is the field quality of the super-conduting dipole and quadrupole magnets, in particular at injection energy. In close collaboration with the magnet designers the field quality is optimised with respect to required dynamic aperture and technological and financial limitations. The main tool is still brute force tracking simulations. The simulation codes are simple, easily adaptable to new requirements and highly optimised for the use on modern computer architectures. To perform the massive tracking studies needed to do this field quality optimisation, a cluster of 20 DEC alpha workstations has been purchased. On the other hand one has to analyse these tracking results with tools that can evaluate the highly nonlinear content of the accelerator structure. In the last decade the Normal Form Tool and more recently the Frequency Map Analysis have been introduced to our field which allow for such an analysis. A number of programs have been developed that are based on the...
Proper thermal hydraulic design and functional architecture are critical to successful steam generator operation and long term reliability. The evolution of steam generators has been a gradual learning process that has benefited from continuous industry operational experience (OPEX). Inadequate thermal hydraulic design can lead to numerous degradation mechanisms such as excessive deposition, corrosion, flow and level instabilities, fluid-elastic instabilities and tube wear. The functional architecture determines the health of the tube bundle and the other internals during manufacturing, handling and operation. It also determines thermal performance as well as establishing global thermal-hydraulic characteristics such as water level shrink and swell response. This paper discusses the range of operational and reliability issues and relates them to the thermal hydraulic attributes and functional architecture of steam generators (many SG reliability issues are further discussed in other presentations at this conference). In pursuing such issues, the paper focuses on the four major features of the equipment, identifying in each case the goals and requirements such features must meet. Typical approaches and the means by which such requirements are addressed in current equipment are discussed. The four features are: 1. Tubing Material and Tube Bundle Heat Transfer Performance; a. Two materials are in current use – Alloy 690 TT and Alloy 800. Both are good materials with excellent performance records which serve their owners very well (the reliability attributes of Alloy 800 and 690 are discussed in other papers at this conference). Caution is advised in the supply of any material: – material quality is only assured by what is specified to material suppliers in procurement specifications – i.e. - all the knowledge and research in the world assures nothing if its findings are not reflected in procurement requirements. b. Heat transfer performance in addition to being
Full Text Available The article is devoted to the development of urban planning and architecture in the era of independence of Uzbekistan. There is also considered the issues of sustainable development of the regions and cities of Uzbekistan. In the realization process of above mentioned tasks first it is necessary to refuse old methods of functional urban planning design obtruded by the Soviet urban planning. In the XX century in designing master plans of cities development of new city parts was taken as a composition framework which neglected old city part that hasnt received appropriate attention. This was the main mistake of the Soviet politics which made cities lost historical city images ensemble construction spirit.
Simmhan, Yogesh; Kumbhare, Alok; Cao, Baohua; Prasanna, Viktor K.
Power utilities globally are increasingly upgrading to Smart Grids that use bi-directional communication with the consumer to enable an information-driven approach to distributed energy management. Clouds offer features well suited for Smart Grid software platforms and applications, such as elastic resources and shared services. However, the security and privacy concerns inherent in an information rich Smart Grid environment are further exacerbated by their deployment on Clouds. Here, we present an analysis of security and privacy issues in a Smart Grids software architecture operating on different Cloud environments, in the form of a taxonomy. We use the Los Angeles Smart Grid Project that is underway in the largest U.S. municipal utility to drive this analysis that will benefit both Cloud practitioners targeting Smart Grid applications, and Cloud researchers investigating security and privacy.
The article presents single-family houses architecture transformations since 1989, with particularly close attention paid to the significance of detail, facture, and colour. The article presents the architecture as an art of designing and building facilities with both use and aesthetic value, an art of shaping space and building forms. Architectural work should correspond to the intended function, technique, economic and aesthetic requirements, thus shaping all elements of human immediate environment, both inside and outside of the building. Architecture of the building is perceived as form, structure, and function, as well as detail, facture, and colour. Facture and colour are created through materials used for external finishes. The solid of the building is noticed first while looking at the building, then the finishes detail such as colour, facture, and detail. Materials for external finishes are commonly selected for their aesthetic value equally with their technical characteristics. The detail was always a characteristic element of style. However, currently the fashion for details can be observed, the fashion for usage of materials for external finishes and inter-connected with that colour and facture. The architecture of Polish single-family houses underwent considerable metamorphosis after system change of 1989 - from destitute in form, devoid in detail and colour socmodernism, to architecture extremely varied in terms of form, utilised structures, materials, and detail. Hence, appearance of the phenomenon called fashion can be observed in the architecture, understood as constant changeability, seeking novelty, and creation based on opinion-forming centres. The architectural fashion consists of form, function, structure, building materials, detail, facture, and colour trends, e.g. after rejecting socmodernism, steep roofs characteristic for single-family houses trend started. After 1989, initially individual single-family house projects were created; however
Gschwind, Michael K
Mechanisms for generating and executing programs for a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA) are provided. A computer program product comprising a computer recordable medium having a computer readable program recorded thereon is provided. The computer readable program, when executed on a computing device, causes the computing device to receive one or more instructions and execute the one or more instructions using logic in an execution unit of the computing device. The logic implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA), based on data stored in a vector register file of the computing device. The vector register file is configured to store both scalar and floating point values as vectors having a plurality of vector elements.
Holmes, Dave; O'Byrne, Patrick; Gastaldo, Denise
This aim of this study was to describe and compare the physical design, as well as the atmosphere of urban gay bathhouses, and reflect on how desire operates within these premises when it intersects with the bathhouse environment and health imperatives. Three bathhouses were studied for a total of 147 h of observation. Men's desire for other men has created a landscape of spaces (real and virtual) where sex takes place in parks, alleys, restrooms, rest stops, adult theatres, video arcades, bookstores, bars, gay bathhouses and finally, the Internet. Although the Internet is perceived as an easy way for encountering sexual partners, gay bathhouses remain the most popular and convenient way, for men having sex with men to meet for regular or casual sex. This paper presents the descriptive results of an ethnographic nursing study that took place in three gay bathhouses located in two Canadian metropolitan areas. Gay bathhouses offer patrons a space within which a wide range of interactions, sensations and pleasure can be experienced. This paper highlights the specific features of three gay bathhouses, compares settings according to their specific architectural features and related sexual activities, and finally, proposes some changes in light of certain health issues.
Yan, Jing; Sharo, Andrew G; Stone, Howard A; Wingreen, Ned S; Bassler, Bonnie L
Biofilms are surface-associated bacterial communities that are crucial in nature and during infection. Despite extensive work to identify biofilm components and to discover how they are regulated, little is known about biofilm structure at the level of individual cells. Here, we use state-of-the-art microscopy techniques to enable live single-cell resolution imaging of a Vibrio cholerae biofilm as it develops from one single founder cell to a mature biofilm of 10,000 cells, and to discover the forces underpinning the architectural evolution. Mutagenesis, matrix labeling, and simulations demonstrate that surface adhesion-mediated compression causes V. cholerae biofilms to transition from a 2D branched morphology to a dense, ordered 3D cluster. We discover that directional proliferation of rod-shaped bacteria plays a dominant role in shaping the biofilm architecture in V. cholerae biofilms, and this growth pattern is controlled by a single gene, rbmA Competition analyses reveal that the dense growth mode has the advantage of providing the biofilm with superior mechanical properties. Our single-cell technology can broadly link genes to biofilm fine structure and provides a route to assessing cell-to-cell heterogeneity in response to external stimuli.
Jung, Yoon; Li, Junang; Fakhri, Nikta
Chromatin is a multiscale dynamic architecture that acts as a template for many biochemical processes such as transcription and DNA replication. Recent developments such as Hi-C technology enable an identification of chromatin interactions across an entire genome. However, a single cell dynamic view of chromatin organization is far from understood. We discuss a new live cell imaging technique to probe the dynamics of the nucleus at a single cell level using single-walled carbon nanotubes (SWNTs). SWNTs are non-perturbing rigid rods (diameter of 1 nm and length of roughly 100 nm) that fluoresce in the near infrared region. Due to their high aspect ratio, they can diffuse in tight spaces and report on the architecture and dynamics of the nucleoplasm. We develop 3D imaging and tracking of SWNTs in the volume of the nucleus using double helix point spread function microscopy (DH-PSF) and discuss the capabilities of the DH-PSF for inferring the 3D orientation of nanotubes based on vectorial diffraction theory.
Geary, Cody; Rothemund, Paul; Andersen, Ebbe Sloth
. We introduce an architecture for designing artificial RNA structures that fold from a single strand, in which arrays of antiparallel RNA helices are precisely organized by RNA tertiary motifs and a new type of crossover pattern. We constructed RNA tiles that assemble into hexagonal lattices......Artificial DNA and RNA structures have been used as scaffolds for a variety of nanoscale devices. In comparison to DNA structures, RNA structures have been limited in size, but they also have advantages: RNA can fold during transcription and thus can be genetically encoded and expressed in cells...
Yeh, Chien-Hung; Yang, Zi-Qing; Huang, Tzu-Jung; Chow, Chi-Wai
To achieve a steady single-longitudinal-mode (SLM) erbium-doped fiber (EDF) laser, the wheel-ring architecture is proposed in the laser cavity. According to Vernier effect, the proposed wheel-ring can produce three different free spectrum ranges (FSRs) to serve as the mode-filter for suppressing the densely multi-longitudinal-mode (MLM). Here, to complete wavelength-tunable EDF laser, an optical tunable bandpass filter (OTBF) is utilized inside the cavity for tuning arbitrarily. In addition, the entire output performances of the proposed EDF wheel-ring laser are also discussed and analyzed experimentally.
A. Mastromauro, Rosa; Liserre, Marco; Dell’Aquila, Antonio
Photovoltaic Systems (PVS) can be easily integrated in residential buildings hence they will be the main responsible of making low-voltage grid power flow bidirectional. Control issues on both the PV side and on the grid side have received much attention from manufacturers, competing for efficiency...
The Virtual Ship is an application of the High Level Architecture (HLA) in which simulation models that represent the components of a warship are brought together in a distributed manner to create a virtual representation of a warship...
Wang, Yukun; Chen, Charles H.; Hu, Dan; Ulmschneider, Martin B.; Ulmschneider, Jakob P.
Many antimicrobial peptides (AMPs) selectively target and form pores in microbial membranes. However, the mechanisms of membrane targeting, pore formation and function remain elusive. Here we report an experimentally guided unbiased simulation methodology that yields the mechanism of spontaneous pore assembly for the AMP maculatin at atomic resolution. Rather than a single pore, maculatin forms an ensemble of structurally diverse temporarily functional low-oligomeric pores, which mimic integral membrane protein channels in structure. These pores continuously form and dissociate in the membrane. Membrane permeabilization is dominated by hexa-, hepta- and octamers, which conduct water, ions and small dyes. Pores form by consecutive addition of individual helices to a transmembrane helix or helix bundle, in contrast to current poration models. The diversity of the pore architectures--formed by a single sequence--may be a key feature in preventing bacterial resistance and could explain why sequence-function relationships in AMPs remain elusive.
Guisoni, N; Monteoliva, D; Diambra, L
It is well known that single-gene circuits with negative feedback loop can lead to oscillatory gene expression when they operate with time delay. In order to generate these oscillations many processes can contribute to properly timing such delay. Here we show that the time delay coming from the transitions between internal states of the cis-regulatory system (CRS) can drive sustained oscillations in an auto-repressive single-gene circuit operating in a small volume like a cell. We found that the cooperative binding of repressor molecules is not mandatory for a oscillatory behavior if there are enough binding sites in the CRS. These oscillations depend on an adequate balance between the CRS kinetic, and the synthesis/degradation rates of repressor molecules. This finding suggest that the multi-site CRS architecture can play a key role for oscillatory behavior of gene expression. Finally, our results can also help to synthetic biologists on the design of the promoters architecture for new genetic oscillatory circuits.
National Campaign To Prevent Teen Pregnancy, Washington, DC.
This report discusses critical social issues linked to teen pregnancy, explaining that teen pregnancy prevention should be viewed as working to improve these social issues. After providing general background on teen pregnancy, the report offers five fact sheets: (1) "Teen Pregnancy, Welfare Dependency, and Poverty" (continuing to reduce…
Park, Ji-Hoon; Lim, Taekyung; Baik, Jaeyoon; Seo, Keumyoung; Moon, Youngkwon; Park, Noejung; Shin, Hyun-Joon; Kyu Kwak, Sang; Ju, Sanghyun; Real Ahn, Joung
Graphene has been used as an electrode and channel material in electronic devices because of its superior physical properties. Recently, electronic devices have changed from a planar to a complicated three-dimensional (3D) geometry to overcome the limitations of planar devices. The evolution of electronic devices requires that graphene be adaptable to a 3D substrate. Here, we demonstrate that chemical-vapor-deposited single-layer graphene can be transferred onto a silicon dioxide substrate with a 3D geometry, such as a concave-convex architecture. A variety of silicon dioxide concave-convex architectures were uniformly and seamlessly laminated with graphene using a thermal treatment. The planar graphene was stretched to cover the concave-convex architecture, and the resulting strain on the curved graphene was spatially resolved by confocal Raman spectroscopy; molecular dynamic simulations were also conducted and supported the observations. Changes in electrical resistivity caused by the spatially varying strain induced as the graphene-silicon dioxide laminate varies dimensionally from 2D to 3D were measured by using a four-point probe. The resistivity measurements suggest that the electrical resistivity can be systematically controlled by the 3D geometry of the graphene-silicon dioxide laminate. This 3D graphene-insulator laminate will broaden the range of graphene applications beyond planar structures to 3D materials.Graphene has been used as an electrode and channel material in electronic devices because of its superior physical properties. Recently, electronic devices have changed from a planar to a complicated three-dimensional (3D) geometry to overcome the limitations of planar devices. The evolution of electronic devices requires that graphene be adaptable to a 3D substrate. Here, we demonstrate that chemical-vapor-deposited single-layer graphene can be transferred onto a silicon dioxide substrate with a 3D geometry, such as a concave-convex architecture. A
Caruso, Pedro; Guardian, Lilian; Tiengo, Tatiane; Dos Santos, Lucio Souza; Junior, Pedro Medeiros
Delirium risk factors are related to the patients' acute and chronic clinical condition, treatment, and environment. The environmental risk factors are essentially determined by the ICU architectural design. Although there are countless architectural variations among the ICUs, all can be classified as single- or multibed rooms. Our objectives were to compare the ICU delirium prevalence and characteristics (coma/delirium-free days, first day in delirium, and delirium motoric subtypes) of critically ill patients admitted in single- or multibed rooms. Retrospective. ICU of a teaching oncologic hospital with 31 beds. Twenty-three beds distributed in one multibed room with 13 beds and other with 10 beds. Eight beds distributed in single-bed rooms. All adult patients admitted from February to November 2011. None. We evaluated 1,587 patients and included 1,253 patients. Patients' characteristics at ICU admission and their outcomes along the ICU stay were not different between patients admitted in single- or multibed rooms. One hundred sixty-three patients (13.0%) had delirium, and the prevalence was significantly lower in patients admitted in single-bed rooms (6.8% × 15.1%; p < 0.01). This lower prevalence occurred in patients admitted due to a medical (11.0% × 25.6%; p < 0.01) or postoperative (5.0% × 11.4%; p < 0.01) reason. However, the coma/delirium-free days, the first day in delirium, and the delirium motoric subtypes were not different between the single- and multibed rooms. The risk factors associated with delirium were admission in multibed rooms (odds ratio, 4.03; 95% CI, 2.13-7.62), older age, ICU-acquired infection, and higher Simplified Acute Physiology Score 3 and Sequential Organ Failure Assessment score. Critically ill patients admitted in single-bed rooms have a lower prevalence of delirium than those admitted in multibed rooms. However, coma/delirium-free days, first day in delirium, and motoric subtypes were not different.
Sportelli, Giancarlo; Belcari, Nicola; Bisogni, Maria Giuseppina; Camarlinghi, Niccolo; Zaccaro, Emanuele; Del Guerra, Alberto
The development of MRI compatible detectors based on compact solid state photomultipliers has recently led to simultaneous fully integrated PET/MRI systems for human imaging. The PET acquisition design for MRI integration is known to have several additional constraints, including smaller space, electromagnetic compatibility issues and thermal management. The current work presents the PET acquisition architecture that has been developed for the TRIMAGE project, whose aim is to provide a cost effective, commercial grade trimodality PET/MRI/EEG scanner. The TRIMAGE PET component consists of 216 modules of 2.5 cm x 2.5 cm, arranged in 18 rectangular detectors of 5 cm x 15 cm, the latter in the axial direction, to form a full ring of 31 cm diameter. Each module consists of a staggered dual layer LYSO matrix read out by two arrays of 4 x 8 SiPMs and an ASIC. The detector board hosts a low-power low-end FPGA that performs pixel identification, energy calibration and handles the communication between the ASICs and the motherboard, which is located in proximity of the scanner. Data is streamed using high-density shielded cables and high-speed LVDS transmission to 9 low-end SoC FPGAs and from there to a central mainboard where coincidences and events statistics are processed. Coincidence data is finally transmitted to a host PC for image reconstruction. The proposed architecture and technological solutions will be presented and discussed.
Cunningham, Hamish; Scott, Donia
Every building, and every computer program, has an architecture: structural and organisational principles that underpin its design and construction. The garden shed\\ud once built by one of the authors had an ad hoc architecture, extracted (somewhat painfully) from the imagination during a slow and non-deterministic process that, luckily, resulted in a structure which keeps the rain on the outside and the mower on the inside (at least for the time being). As well as being ad hoc (i.e. not info...
An open scalable architecture will make it easier and quicker to adapt active phased array radar to new missions and platforms. This will provide radar manufacturers with larger markets, more commonality in radar systems, and a better continuity in radar production lines. The procurement of open
Avgeriou, Paris; Zdun, Uwe; Borne, Isabelle
Software evolution has largely been focused on low-level implementation artefacts through refactoring techniques rather than the architectural level. However code-centric evolution techniques have not managed to effectively solve the problems that software evolution entails. Instead a paradigm shift
Lala, Purnima; Sørensen, Troels Bundgaard; Prasad, Ramjee
hotspot conditions aka Place Time Capacity (PTC). In this paper, we explore a disparate way of employing multi-UAV systems by proposing a concept of Hovering Ad-Hoc Network (HANET) distinctively to solve PTC congestion using millimeter wave communication. We present a suitable architecture based...
Andrew E O Hughes
Full Text Available Next-generation sequencing has been used to infer the clonality of heterogeneous tumor samples. These analyses yield specific predictions-the population frequency of individual clones, their genetic composition, and their evolutionary relationships-which we set out to test by sequencing individual cells from three subjects diagnosed with secondary acute myeloid leukemia, each of whom had been previously characterized by whole genome sequencing of unfractionated tumor samples. Single-cell mutation profiling strongly supported the clonal architecture implied by the analysis of bulk material. In addition, it resolved the clonal assignment of single nucleotide variants that had been initially ambiguous and identified areas of previously unappreciated complexity. Accordingly, we find that many of the key assumptions underlying the analysis of tumor clonality by deep sequencing of unfractionated material are valid. Furthermore, we illustrate a single-cell sequencing strategy for interrogating the clonal relationships among known variants that is cost-effective, scalable, and adaptable to the analysis of both hematopoietic and solid tumors, or any heterogeneous population of cells.
Adenuga, Olugbenga A; Kekwaletswe, Ray M; Coleman, Alfred
Investments in healthcare information and communication technology (ICT) and health information systems (HIS) continue to increase. This is creating immense pressure on healthcare ICT and HIS to deliver and show significance in such investments in technology. It is discovered in this study that integration and interoperability contribute largely to this failure in ICT and HIS investment in healthcare, thus resulting in the need towards healthcare architecture for eHealth. This study proposes an eHealth architectural model that accommodates requirement based on healthcare need, system, implementer, and hardware requirements. The model is adaptable and examines the developer's and user's views that systems hold high hopes for their potential to change traditional organizational design, intelligence, and decision-making.
Li, Yong; Chen, Wentao; Jin, Depeng; Su, Li; Zeng, Lieguang
Carriers and service providers are rushing to provide Ethernet-based virtual private network services in metro area network (MAN) as the most cost effective way to address the needs of the enterprise network market. To address the fast recovery from any signal failure issue in the Metro Ethernet, we propose a metro Ethernet architecture based on multiple Enhanced Self-protected Spanning Trees (ESST). The recovery mechanism, named Birthday-based Link Replacing Mechanism (BLRM), in this architecture is able to transform a self-protected spanning tree into another spanning tree after any signal link or node failure. Simulation result demonstrates the effectiveness of the BLRM in achieving fast recovery.
Pashazadeh, Saied; Niyari, Elham Abdolrahimi
The purpose of modeling enterprise architecture and analysis of it is to ease decision making about architecture of information systems. Planning is one of the most important tasks in an organization and has a major role in increasing the productivity of it. Scope of this paper is scheduling processes in the enterprise architecture. Scheduling is decision making on execution start time of processes that are used in manufacturing and service systems. Different methods and tools have been propo...
Bowers, Clifford R; Dvoyashkin, Muslim; Salpage, Sahan R; Akel, Christopher; Bhase, Hrishi; Geer, Michael F; Shimizu, Linda S
Urea is a versatile building block that can be modified to self-assemble into a multitude of structures. One-dimensional nanochannels with zigzag architecture and cross-sectional dimensions of only ∼3.7 Å × 4.8 Å are formed by the columnar assembly of phenyl ether bis-urea macrocycles. Nanochannels formed by phenylethynylene bis-urea macrocycles have a round cross-section with a diameter of ∼9.0 Å. This work compares the Xe atom packing and diffusion inside the crystalline channels of these two bis-ureas using hyperpolarized Xe-129 NMR. The elliptical channel structure of the phenyl ether bis-urea macrocycle produces a Xe-129 powder pattern line shape characteristic of an asymmetric chemical shift tensor with shifts extending to well over 300 ppm with respect to the bulk gas, reflecting extreme confinement of the Xe atom. The wider channels formed by phenylethynylene bis-urea, in contrast, present an isotropic dynamically average electronic environment. Completely different diffusion dynamics are revealed in the two bis-ureas using hyperpolarized spin-tracer exchange NMR. Thus, a simple replacement of phenyl ether with phenylethynylene as the rigid linker unit results in a transition from single-file to Fickian diffusion dynamics. Self-assembled bis-urea macrocycles are found to be highly suitable materials for fundamental molecular transport studies on micrometer length scales.
Fu, Xueyang; Huang, Jiabin; Ding, Xinghao; Liao, Yinghao; Paisley, John
We introduce a deep network architecture called DerainNet for removing rain streaks from an image. Based on the deep convolutional neural network (CNN), we directly learn the mapping relationship between rainy and clean image detail layers from data. Because we do not possess the ground truth corresponding to real-world rainy images, we synthesize images with rain for training. In contrast to other common strategies that increase depth or breadth of the network, we use image processing domain knowledge to modify the objective function and improve deraining with a modestly-sized CNN. Specifically, we train our DerainNet on the detail (high-pass) layer rather than in the image domain. Though DerainNet is trained on synthetic data, we find that the learned network translates very effectively to real-world images for testing. Moreover, we augment the CNN framework with image enhancement to improve the visual results. Compared with state-of-the-art single image deraining methods, our method has improved rain removal and much faster computation time after network training.
Smart, Paul R.; Sycara, Katia; Tang, Yuqing
Cognitive social simulation is a computer simulation technique that aims to improve our understanding of the dynamics of socially-situated and socially-distributed cognition. This makes cognitive social simulation techniques particularly appealing as a means to undertake experiments into team cognition. The current paper reports on the results of an ongoing effort to develop a cognitive social simulation capability that can be used to undertake studies into team cognition using the ACT-R cognitive architecture. This capability is intended to support simulation experiments using a team-based problem solving task, which has been used to explore the effect of different organizational environments on collective problem solving performance. The functionality of the ACT-R-based cognitive social simulation capability is presented and a number of areas of future development work are outlined. The paper also describes the motivation for adopting cognitive architectures in the context of social simulation experiments and presents a number of research areas where cognitive social simulation may be useful in developing a better understanding of the dynamics of team cognition. These include the use of cognitive social simulation to study the role of cognitive processes in determining aspects of communicative behavior, as well as the impact of communicative behavior on the shaping of task-relevant cognitive processes (e.g., the social shaping of individual and collective memory as a result of communicative exchanges). We suggest that the ability to perform cognitive social simulation experiments in these areas will help to elucidate some of the complex interactions that exist between cognitive, social, technological and informational factors in the context of team-based problem-solving activities.
Cominelli, A.; Acconcia, G.; Peronio, P.; Rech, I.; Ghioni, M.
transfer rate towards the elaboration unit. We developed a novel readout architecture, starting from a completely different perspective: considering the maximum data rate we can manage with a PC, a limited set of conversion data is selected and transferred to the elaboration unit during each excitation period, in order to take full advantage of the bus bandwidth toward the PC. In particular, we introduce a smart routing logic, able to dynamically connect a large number of SPAD detectors to a limited set of high-performance external acquisition chains, paving the way for a more efficient use of resources and allowing us to effectively break the tradeoff between integration and performance, which affects the solutions proposed so far. The routing electronic features a pixelated architecture, while 3D-stacking techniques are exploited to connect each SPAD to its dedicated electronic, leading to a minimization of the overall number of interconnections crossing the integrated system, which is one of the main issues in high-density arrays.
Sun, Qiuye; Zhou, Jianguo; Guerrero, Josep M.
With the fast proliferation of single-phase distributed generation (DG) units and loads integrated into residential microgrids, independent power sharing per phase and full use of the energy generated by DGs have become crucial. To address these issues, this paper proposes a hybrid microgrid...... control of load power sharing among phases, as well as to allow fully utilization of the energy generated by DGs. Meanwhile, the method combining the modified adaptive backstepping-sliding mode control approach and droop control is also proposed to design the SPBTB system controllers. With the application...... of the proposed PSU and its power management strategy, the loads among different phases can be properly supplied and the energy can be fully utilized as well as obtaining better load sharing. Simulation and experimental results are provided to demonstrate the validity of the proposed hybrid microgrid structure...
Levesque, John; Larkin, Jeff; Foster, Martyn; Glenski, Joe; Geissler, Garry; Whalen, Stephen; Waldecker, Brian; Carter, Jonathan; Skinner, David; He, Helen; Wasserman, Harvey; Shalf, John; Shan,Hongzhang; Strohmaier, Erich
Over the past 15 years, microprocessor performance hasdoubled approximately every 18 months through increased clock rates andprocessing efficiency. In the past few years, clock frequency growth hasstalled, and microprocessor manufacturers such as AMD have moved towardsdoubling the number of cores every 18 months in order to maintainhistorical growth rates in chip performance. This document investigatesthe ramifications of multicore processor technology on the new Cray XT4?systems based on AMD processor technology. We begin by walking throughthe AMD single-core and dual-core and upcoming quad-core processorarchitectures. This is followed by a discussion of methods for collectingperformance counter data to understand code performance on the Cray XT3?and XT4? systems. We then use the performance counter data to analyze theimpact of multicore processors on the performance of microbenchmarks suchas STREAM, application kernels such as the NAS Parallel Benchmarks, andfull application codes that comprise the NERSC-5 SSP benchmark suite. Weexplore compiler options and software optimization techniques that canmitigate the memory bandwidth contention that can reduce computingefficiency on multicore processors. The last section provides a casestudy of applying the dual-core optimizations to the NAS ParallelBenchmarks to dramatically improve their performance.
van de Kamp, Cornelis; Gawthrop, Peter J; Gollee, Henrik; Lakie, Martin; Loram, Ian D
Modular organization in control architecture may underlie the versatility of human motor control; but the nature of the interface relating sensory input through task-selection in the space of performance variables to control actions in the space of the elemental variables is currently unknown. Our central question is whether the control architecture converges to a serial process along a single channel? In discrete reaction time experiments, psychologists have firmly associated a serial single channel hypothesis with refractoriness and response selection [psychological refractory period (PRP)]. Recently, we developed a methodology and evidence identifying refractoriness in sustained control of an external single degree-of-freedom system. We hypothesize that multi-segmental whole-body control also shows refractoriness. Eight participants controlled their whole body to ensure a head marker tracked a target as fast and accurately as possible. Analysis showed enhanced delays in response to stimuli with close temporal proximity to the preceding stimulus. Consistent with our preceding work, this evidence is incompatible with control as a linear time invariant process. This evidence is consistent with a single-channel serial ballistic process within the intermittent control paradigm with an intermittent interval of around 0.5 s. A control architecture reproducing intentional human movement control must reproduce refractoriness. Intermittent control is designed to provide computational time for an online optimization process and is appropriate for flexible adaptive control. For human motor control we suggest that parallel sensory input converges to a serial, single channel process involving planning, selection, and temporal inhibition of alternative responses prior to low dimensional motor output. Such design could aid robots to reproduce the flexibility of human control.
Jensen, Brian Sveistrup; Jónasson, Sævar Þór; Johansen, Tom Keinicke
This paper presents a continuous wave vital signs detection radar that utilizes a heterodyne transceiver architecture with a 10 MHz intermediate frequency to remove both unwanted DC offsets in the electronic components and the so-called null-detection-points. For successful removal of the latter...
Van den Heuvel, F.A.
Architectural photogrammetry has been practised for more than a century for the documentation of cultural heritage. Nowadays, the emphasis is on the construction of computer models for virtual reality applications. Since the introduction of the computer, and later the digital camera, research in
Full Text Available Development of body hair is an important physiological and cellular process that leads to better adaption in tropical environments for dairy cattle. Various studies suggested a major gene and, more recently, associated genes for hairy locus in dairy cattle. Main aim of this study was to i employ a variant of the discordant sib pair model, in which half sibs from the same sires are randomly sampled using their affection statues, ii use various single marker regression approaches, and iii use whole genome regression approaches to dissect genetic architecture of the hairy gene in the cattle. Whole and single genome regression approaches detected strong genomic signals from Chromosome 23. Although there is a major gene effect on hairy phenotype sourced from chromosome 23: whole genome regression approach also suggested polygenic component related with other parts of the genome. Such a result could not be obtained by any of the single marker approaches.
Chromosome architecture needs to be investigated in relation with the chemical function of DNA. The kinetics of gene expression, DNA replication, and repair are driven by the mechanisms by which a functional nuclear protein finds its substrate in the nucleus. Single-particle tracking (SPT) is a method to quantify fluorescent molecules dynamics from the tracks of the single molecules recorded by high-resolution microscopes. SPT offers direct observation of the movement and single-molecule resolution. Usually SPT is performed on membranes because of higher contrast. Here, we introduce a novel method to record the trajectories of weakly fluorescent molecules in the nucleus of living cells. I-SPT uses some specific detection and analysis tools to enable the computation of reliable statistics on nuclear particle movement.
The present study of PhD education and its impact on architectural research singles out three layers of relational architecture. A first layer of relationality appears in a graphic model in which an intimate link between PhD education and architectural research is outlined. The model reflects...... in a scholarly institution (element #3), as well as the certified PhD scholar (element #4) and the architectural profession, notably its labour market (element #5). This first layer outlines the contemporary context which allows architectural research to take place in a dynamic relationship to doctoral education....... A second layer of relational architecture is revealed when one examines the conception of architecture generated in selected PhD dissertations. Focusing on six dissertations with which the author of the present article was involved as a supervisor, the analysis lays bare a series of dynamic...
André Borin Soares
Full Text Available This work presents the integration of several IPs to generate a system-on-chip (SoC for digital television set-top box compliant to the SBTVD standard. Embedded consumer electronics for multimedia applications like video processing systems require large storage capacity and high bandwidth memory. Also, those systems are built from heterogeneous processing units, designed to perform specific tasks in order to maximize the overall system efficiency. A single off-chip memory is generally shared between the processing units to reduce power and save costs. The external memory access is one bottleneck when decoding high-definition video sequences in real time. In this work, a four-level memory hierarchy was designed to manage the decoded video in macroblock granularity with low latency. The use of the memory hierarchy in the system design is challenging because it impacts the system integration process and IP reuse in a collaborative design team. Practical strategies used to solve integration problems are discussed in this text. The SoC architecture was validated and is being progressively prototyped using a Xilinx Virtex-5 FPGA board.
Liu, Weisong; Huang, Zhitao; Wang, Xiang; Sun, Weichao
In a cognitive radio sensor network (CRSN), wideband spectrum sensing devices which aims to effectively exploit temporarily vacant spectrum intervals as soon as possible are of great importance. However, the challenge of increasingly high signal frequency and wide bandwidth requires an extremely high sampling rate which may exceed today's best analog-to-digital converters (ADCs) front-end bandwidth. Recently, the newly proposed architecture called modulated wideband converter (MWC), is an attractive analog compressed sensing technique that can highly reduce the sampling rate. However, the MWC has high hardware complexity owing to its parallel channel structure especially when the number of signals increases. In this paper, we propose a single channel modulated wideband converter (SCMWC) scheme for spectrum sensing of band-limited wide-sense stationary (WSS) signals. With one antenna or sensor, this scheme can save not only sampling rate but also hardware complexity. We then present a new, SCMWC based, single node CR prototype System, on which the spectrum sensing algorithm was tested. Experiments on our hardware prototype show that the proposed architecture leads to successful spectrum sensing. And the total sampling rate as well as hardware size is only one channel's consumption of MWC.
Full Text Available The use of mobile nodes to collect data in a Wireless Sensor Network (WSN has gained special attention over the last years. Some researchers explore the use of Unmanned Aerial Vehicles (UAVs as mobile node for such data-collection purposes. Analyzing these works, it is apparent that mobile nodes used in such scenarios are typically equipped with at least two different radio interfaces. The present work presents a Dual-Stack Single-Radio Communication Architecture (DSSRCA, which allows a UAV to communicate in a bidirectional manner with a WSN and a Sink node. The proposed architecture was specifically designed to support different network QoS requirements, such as best-effort and more reliable communications, attending both UAV-to-WSN and UAV-to-Sink communications needs. DSSRCA was implemented and tested on a real UAV, as detailed in this paper. This paper also includes a simulation analysis that addresses bandwidth consumption in an environmental monitoring application scenario. It includes an analysis of the data gathering rate that can be achieved considering different UAV flight speeds. Obtained results show the viability of using a single radio transmitter for collecting data from the WSN and forwarding such data to the Sink node.
Sayyed, Ali; de Araújo, Gustavo Medeiros; Bodanese, João Paulo; Becker, Leandro Buss
The use of mobile nodes to collect data in a Wireless Sensor Network (WSN) has gained special attention over the last years. Some researchers explore the use of Unmanned Aerial Vehicles (UAVs) as mobile node for such data-collection purposes. Analyzing these works, it is apparent that mobile nodes used in such scenarios are typically equipped with at least two different radio interfaces. The present work presents a Dual-Stack Single-Radio Communication Architecture (DSSRCA), which allows a UAV to communicate in a bidirectional manner with a WSN and a Sink node. The proposed architecture was specifically designed to support different network QoS requirements, such as best-effort and more reliable communications, attending both UAV-to-WSN and UAV-to-Sink communications needs. DSSRCA was implemented and tested on a real UAV, as detailed in this paper. This paper also includes a simulation analysis that addresses bandwidth consumption in an environmental monitoring application scenario. It includes an analysis of the data gathering rate that can be achieved considering different UAV flight speeds. Obtained results show the viability of using a single radio transmitter for collecting data from the WSN and forwarding such data to the Sink node.
Full Text Available There is an increasing need for enterprise architecture in numerous organizations with complicated systems with various processes. Support for information technology, organizational units whose elements maintain complex relationships increases. Enterprise architecture is so effective that its non-use in organizations is regarded as their institutional inability in efficient information technology management. The enterprise architecture process generally consists of three phases including strategic programing of information technology, enterprise architecture programing and enterprise architecture implementation. Each phase must be implemented sequentially and one single flaw in each phase may result in a flaw in the whole architecture and, consequently, in extra costs and time. If a model is mapped for the issue and then it is evaluated before enterprise architecture implementation in the second phase, the possible flaws in implementation process are prevented. In this study, the processes of enterprise architecture are illustrated through UML diagrams, and the architecture is evaluated in programming phase through transforming the UML diagrams to Petri nets. The results indicate that the high costs of the implementation phase will be reduced.
Sukkari, Dalal E.
This paper introduces the first asynchronous, task-based formulation of the polar decomposition and its corresponding implementation on manycore architectures. Based on a formulation of the iterative QR dynamically-weighted Halley algorithm (QDWH) for the calculation of the polar decomposition, the proposed implementation replaces the original LU factorization for the condition number estimator by the more adequate QR factorization to enable software portability across various architectures. Relying on fine-grained computations, the novel task-based implementation is capable of taking advantage of the identity structure of the matrix involved during the QDWH iterations, which decreases the overall algorithmic complexity. Furthermore, the artifactual synchronization points have been weakened compared to previous implementations, unveiling look-ahead opportunities for better hardware occupancy. The overall QDWH-based polar decomposition can then be represented as a directed acyclic graph (DAG), where nodes represent computational tasks and edges define the inter-task data dependencies. The StarPU dynamic runtime system is employed to traverse the DAG, to track the various data dependencies and to asynchronously schedule the computational tasks on the underlying hardware resources, resulting in an out-of-order task scheduling. Benchmarking experiments show significant improvements against existing state-of-the-art high performance implementations for the polar decomposition on latest shared-memory vendors\\' systems, while maintaining numerical accuracy.
van den Berg, Ewout; Candès, Emmanuel; Chinn, Garry; Levin, Craig; Olcott, Peter Demetri; Sing-Long, Carlos
Advances in solid-state technology have enabled the development of silicon photomultiplier sensor arrays capable of sensing individual photons. Combined with high-frequency time-to-digital converters (TDCs), this technology opens up the prospect of sensors capable of recording with high accuracy both the time and location of each detected photon. Such a capability could lead to significant improvements in imaging accuracy, especially for applications operating with low photon fluxes such as light detection and ranging and positron-emission tomography. The demands placed on on-chip readout circuitry impose stringent trade-offs between fill factor and spatiotemporal resolution, causing many contemporary designs to severely underuse the technology's full potential. Concentrating on the low photon flux setting, this paper leverages results from group testing and proposes an architecture for a highly efficient readout of pixels using only a small number of TDCs. We provide optimized design instances for various sensor parameters and compute explicit upper and lower bounds on the number of TDCs required to uniquely decode a given maximum number of simultaneous photon arrivals. To illustrate the strength of the proposed architecture, we note a typical digitization of a 60 × 60 photodiode sensor using only 142 TDCs. The design guarantees registration and unique recovery of up to four simultaneous photon arrivals using a fast decoding algorithm. By contrast, a cross-strip design requires 120 TDCs and cannot uniquely decode any simultaneous photon arrivals. Among other realistic simulations of scintillation events in clinical positron-emission tomography, the above design is shown to recover the spatiotemporal location of 99.98% of all detected photons.
Pendleton, Matthew; Sebra, Robert; Pang, Andy Wing Chun; Ummat, Ajay; Franzen, Oscar; Rausch, Tobias; Stütz, Adrian M; Stedman, William; Anantharaman, Thomas; Hastie, Alex; Dai, Heng; Fritz, Markus Hsi-Yang; Cao, Han; Cohain, Ariella; Deikus, Gintaras; Durrett, Russell E; Blanchard, Scott C; Altman, Roger; Chin, Chen-Shan; Guo, Yan; Paxinos, Ellen E; Korbel, Jan O; Darnell, Robert B; McCombie, W Richard; Kwok, Pui-Yan; Mason, Christopher E; Schadt, Eric E; Bashir, Ali
We present the first comprehensive analysis of a diploid human genome that combines single-molecule sequencing with single-molecule genome maps. Our hybrid assembly markedly improves upon the contiguity observed from traditional shotgun sequencing approaches, with scaffold N50 values approaching 30 Mb, and we identified complex structural variants (SVs) missed by other high-throughput approaches. Furthermore, by combining Illumina short-read data with long reads, we phased both single-nucleotide variants and SVs, generating haplotypes with over 99% consistency with previous trio-based studies. Our work shows that it is now possible to integrate single-molecule and high-throughput sequence data to generate de novo assembled genomes that approach reference quality.
Born, A-K; Rottmar, M; Lischer, S; Pleskova, M; Bruinink, A; Maniura-Weber, K
Cell shape and regulation of biological processes such as proliferation and differentiation are to a large degree connected. Investigation of the possible relationship between cell shape and function is therefore important for developing new material concepts for medical applications as well as developing novel cell based sensors. Cell spreading requires a firm contact with the underlying substrate, with focal contacts (FC) being the primary sites of adhesion. They consist of a large number of clustered transmembrane proteins (integrins). FC integrins connect the cell cytoskeleton with the cell substratum. It has been demonstrated that cell spreading increases osteoblast differentiation in pre-osteoblastic progenitors. The gradual process of osteogenesis can be followed by different proteins being expressed at various time points, comprising early (e.g., bone-specific alkaline phosphatase (bALP)) and late genes (e.g., osteocalcin (OC)). In the present study we have used immunohistochemistry and RT-PCR to determine osteogenic differentiation of human bone cells (HBC). For online monitoring, fluorescently-tagged actin and vinculin were used for transfection of HBCs. Transfection of HBCs with an OC promoter gene construct allowed us to online monitor the gradual process of osteogenesis. We found distinct changes in cell architecture upon osteogenic differentiation thus providing evidence for the connection between cell shape and functional state.
Full Text Available Cell shape and regulation of biological processes such as proliferation and differentiation are to a large degree connected. Investigation of the possible relationship between cell shape and function is therefore important for developing new material concepts for medical applications as well as developing novel cell based sensors. Cell spreading requires a firm contact with the underlying substrate, with focal contacts (FC being the primary sites of adhesion. They consist of a large number of clustered transmembrane proteins (integrins. FC integrins connect the cell cytoskeleton with the cell substratum. It has been demonstrated that cell spreading increases osteoblast differentiation in pre-osteoblastic progenitors. The gradual process of osteogenesis can be followed by different proteins being expressed at various time points, comprising early (e.g., bone-specific alkaline phosphatase (bALP and late genes (e.g., osteocalcin (OC. In the present study we have used immunohistochemistry and RT-PCR to determine osteogenic differentiation of human bone cells (HBC. For online monitoring, fluorescently-tagged actin and vinculin were used for transfection of HBCs. Transfection of HBCs with an OC promoter gene construct allowed us to online monitor the gradual process of osteogenesis. We found distinct changes in cell architecture upon osteogenic differentiation thus providing evidence for the connection between cell shape and functional state.
Andersson, Jonas E
and usability are constituents of the building’s performative capacity in relation to a large and varied group of users. In this paper, this capacity has been termed usefulness. It refers to the fit between the individual user and architecture and the built environments, i.e. the perceived level of independent...... of architecture and built environments, while usability refers to both physical and other measures that have been deemed necessary to realize in order to create a usable built space. A high level of accessibility, but a low degree of usability, indicates a high fit between user demands and the programming...
Zhou, Xin X; Zou, Xinzhi; Chung, Hokyung K; Gao, Yuchen; Liu, Yanxia; Qi, Lei S; Lin, Michael Z
Optical control of CRISPR-Cas9-derived proteins would be useful for restricting gene editing or transcriptional regulation to desired times and places. Optical control of Cas9 functions has been achieved with photouncageable unnatural amino acids or by using light-induced protein interactions to reconstitute Cas9-mediated functions from two polypeptides. However, these methods have only been applied to one Cas9 species and have not been used for optical control of different perturbations at two genes. Here, we use photodissociable dimeric fluorescent protein domains to engineer single-chain photoswitchable Cas9 (ps-Cas9) proteins in which the DNA-binding cleft is occluded at baseline and opened upon illumination. This design successfully controlled different species and functional variants of Cas9, mediated transcriptional activation more robustly than previous optogenetic methods, and enabled light-induced transcription of one gene and editing of another in the same cells. Thus, a single-chain photoswitchable architecture provides a general method to control a variety of Cas9-mediated functions.
Korzeniewski, Carol [Texas Tech Univ., Lubbock, TX (United States). Department of Chemistry & Biochemistry
The project primary objectives are to prepare and elucidate the promoting properties of materials that possess high activity for the conversion of hydrogen and related small molecules (water, oxygen, carbon monoxide and methanol) in polymer electrolyte fuel cells. One area of research has focused on the study of catalyst materials. Protocols were developed for probing the structure and benchmarking the activity of Pt and Pt bimetallic nanometer-scale catalyst against Pt single crystal electrode standards. A second area has targeted fuel cell membrane and the advancement of simple methods mainly based on vibrational spectroscopy that can be applied broadly in the study of membrane structure and transport properties. Infrared and Raman methods combined with least-squares data modeling were applied to investigate and assist the design of robust, proton conductive membranes, which resist reactant crossover.
... Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 71-AGENCY TRAVEL ACCOUNTABILITY REQUIREMENTS Travel Authorization § 301-71.102 May we issue a single authorization... are traveling together on a single trip. However, you must attach a list of all travelers to the...
programming interface ( API ) makes messaging, object update, and other services available. The infrastructure may be extended for individual system...architecture for integration with other SoS products addressing 60 percent lifecycle cost of sustain- ment exacerbated by contractor lock-in when...and quality attribute requirements. They did not explicitly distinguish between the two types of requirements. Downstream lifecycle costs and
Sustainable architecture has become a hot issue lately as the impacts of climate change become more intense. Architecture educations have responded by integrating knowledge of sustainable design in their curriculum. However, in the real life, new buildings keep coming with designs that completely ignore sustainable principles. This paper discusses the results of two national competitions on sustainable architecture targeted for architecture students (conducted in 2012 and 2013). The results a...
of green architecture. The paper argues that this greenification of facades is insufficient. The green is only a skin cladding the exterior envelope without having a spatial significance. Through the paper it is proposed to flip the order of words from green architecture to architectural green....... Architectural green could signify green architecture with inclusive interrelations between green and space, built and unbuilt, inside and outside. The aim of the term is to reflect a new focus in green architecture – its architectural performance. Ecological issues are not underestimated or ignored, but so far...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One...
Pozzi, Nicola; Bystranowska, Dominika; Zuo, Xiaobing; Di Cera, Enrico
The coagulation factor prothrombin has a complex spatial organization of its modular assembly that comprises the N-terminal Gla domain, kringle-1, kringle-2, and the C-terminal protease domain connected by three intervening linkers. Here we use single molecule Förster resonance energy transfer to access the conformational landscape of prothrombin in solution and uncover structural features of functional significance that extend recent x-ray crystallographic analysis. Prothrombin exists in equilibrium between two alternative conformations, open and closed. The closed conformation predominates (70%) and features an unanticipated intramolecular collapse of Tyr(93) in kringle-1 onto Trp(547) in the protease domain that obliterates access to the active site and protects the zymogen from autoproteolytic conversion to thrombin. The open conformation (30%) is more susceptible to chymotrypsin digestion and autoactivation, and features a shape consistent with recent x-ray crystal structures. Small angle x-ray scattering measurements of prothrombin wild type stabilized 70% in the closed conformation and of the mutant Y93A stabilized 80% in the open conformation directly document two envelopes that differ 50 Å in length. These findings reveal important new details on the conformational plasticity of prothrombin in solution and the drastic structural difference between its alternative conformations. Prothrombin uses the intramolecular collapse of kringle-1 onto the active site in the closed form to prevent autoactivation. The open-closed equilibrium also defines a new structural framework for the mechanism of activation of prothrombin by prothrombinase. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.
Fiebig, Jennifer; Koss, Holger
The extreme climate is a growing problem caused by climate change in many parts of the world. Research in Arctic regions offer a great potential for adaptation for other extreme climates. The issue of snow drift and accumulation in north European and arctic regions exists since the first human se...
Kristensen, Claus; Kirkegaard, Poul Henning
Details in architecture have a significant influence on how architecture is experienced. One can touch the materials and analyse the detailing - thus details give valuable information about the architectural scheme as a whole. The absence of perceptual stimulation like details and materiality...... / tactility can blur the meaning of the architecture and turn it into an empty statement. The present paper will outline detailing in contemporary architecture and discuss the issue with respect to architectural quality. Architectural cases considered as sublime piece of architecture will be presented...
Huang, Hongwei; Cao, Ranran; Yu, Shixin; Xu, Kang; Hao, Weichang; Wang, Yonggang; Dong, Fan; Zhang, Tierui; Zhang, Yihe
Single-layer catalysis sparks huge interests and gains widespread attention owing to its high activity. Simultaneously, three-dimensional (3D) hierarchical structure can afford large surface area and abundant reactive sites, contributing to high efficiency. Herein, we report an absorbing single-unit-cell layer established Bi2WO6 3D hierarchical architecture fabricated by a sodium dodecyl benzene sulfonate (SDBS)-assisted assembled strategy. The DBS- long chains can adsorb on the (Bi2O2)2+ layers and hence impede stacking of the layers, resulting in the single-unit-cell layer. We also uncovered that SDS with a shorter chain is less effective than SDBS. Due to the sufficient exposure of surface O atoms, single-unit-cell layer 3D Bi2WO6 shows strong selectivity for adsorption on multiform organic dyes with different charges. Remarkably, the single-unit-cell layer 3D Bi2WO6 casts profoundly enhanced photodegradation activity and especially a superior photocatalytic H2 evolution rate, which is 14-fold increase in contrast to the bulk Bi2WO6. Systematic photoelectrochemical characterizations disclose that the substantially elevated carrier density and charge separation efficiency take responsibility for the strengthened photocatalytic performance. Additionally, the possibility of single-unit-cell layer 3D Bi2WO6 as dye-sensitized solar cells (DSSC) has also been attempted and it was manifested to be a promising dye-sensitized photoanode for oxygen evolution reaction (ORR). Our work not only furnish an insight into designing single-layer assembled 3D hierarchical architecture, but also offer a multi-functional material for environmental and energy applications.
Wang, Liyun; Keatch, Robert; Zhao, Qi; Wright, John A; Bryant, Clare E; Redmann, Anna L; Terentjev, Eugene M
Biofilm formation on abiotic surfaces in food and medical industry can cause severe contamination and infection, yet how biological and physical factors determine cellular architecture of early biofilms and bacterial behavior of the constituent cells remains largely unknown. In this study we examine the specific role of type-I fimbriae in nascent stages of biofilm formation and the response of micro-colonies to environmental flow shear at single-cell resolution. The results show that type-I fimbriae are not required for reversible adhesion from plankton, but critical for irreversible adhesion of Escherichia coli ( E.coli ) MG1655 forming biofilms on polyethylene terephthalate (PET) surfaces. Besides establishing a firm cell-surface contact, the irreversible adhesion seems necessary to initiate the proliferation of E.coli on the surface. After application of shear stress, bacterial retention is dominated by the 3D architecture of colonies independent of the population and the multi-layered structure could protect the embedded cells from being insulted by fluid shear, while cell membrane permeability mainly depends on the biofilm population and the duration time of the shear stress. Importance Bacterial biofilms could lead to severe contamination problems in medical devices and food processing equipment. However, biofilms are usually studied at a rough macroscopic level, thus little is known about how individual bacterial behavior within biofilms and multicellular architecture are influenced by bacterial appendages (e.g. pili/fimbriae) and environmental factors during early biofilm formation. We apply Confocal Laser Scanning Microscopy (CLSM) to visualize E.coli micro-colonies at single-cell resolution. Our findings suggest that type-I fimbriae are vital to the initiation of bacterial proliferation on surfaces and that the responses of biofilm architecture and cell membrane permeability of constituent bacteria to fluid shear stress are different, which are
Joshi, Pamela; Quane, James M.; Cherlin, Andrew J.
In this paper, we advance and test an integrative model of the effects of employment status, nonstandard work schedules, male employment, and women's perceptions of economic instability on union formation among low-income single mothers. On the basis of the longitudinal data from 1,299 low-income mothers from the Three-City Welfare Study, results…
This paper discusses issues of legal abortion and women's rights in the US. Abortion has been a political issue since the 1970s in the US. Following the Supreme Court's decision in the case of Roe vs. Wade, conservatives and liberals were divided based on their stand on abortion laws. Moreover, gender affects the range of opinions. Gender gap in abortion attitudes is most evident among conservatives. Conservative and extremely conservative women are against legal abortion more strongly than men with those same political views. Liberal and extremely liberal women have about the same amount of support for legal abortion as liberal men do. Labor force participation, marriage, education, and religion have impact on women and men's attitudes toward abortion; yet none of these explain the politicization of abortion. The change in support for legal abortion by political views and time period (1974-93) is shown in this paper. Women's rights are at the core when issues on abortion are to be discussed; the circumstances of the pregnancy and not the fetus become the focus. Although some women¿s groups support this stand, it faces a continuing debate with pro-life groups. The prevailing ideologies attempt to accommodate the new ideas expressed by the movement, while some of its stronger views are tempered in order to win a measure of political success.
Doerry, Armin W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bickel, Douglas L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Typically, when three or more antenna beams along a single axis are required, the answer has been multiple antenna phase-centers, essentially a phase-monopulse system. Such systems and their design parameters are well-reported in the literature. Less appreciated is that three or more antenna beams can also be generated in an amplitude-monopulse fashion. Consequently, design guidelines and performance analysis of such antennas is somewhat under-reported in the literature. We provide discussion herein of three beams arrayed in a single axis with an amplitude-monopulse configuration. Acknowledgements The preparation of this report is the result of an unfunded research and development activity. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administ ration under contract DE-AC04-94AL85000.
This paper will discuss the challenges faced by architectural education today. It takes as its starting point the double commitment of any school of architecture: on the one hand the task of preserving the particular knowledge that belongs to the discipline of architecture, and on the other hand...... the obligation to prepare students to perform in a profession that is largely defined by forces outside that discipline. It will be proposed that the autonomy of architecture can be understood as a unique kind of information: as architecture’s self-reliance or knowledge-about itself. A knowledge...... that is not scientific or academic but is more like a latent body of data that we find embedded in existing works of architecture. This information, it is argued, is not limited by the historical context of the work. It can be thought of as a virtual capacity – a reservoir of spatial configurations that can...
Steichen, J.J.; Asch, P.A.; Tsang, R.C.
Single-photon absorptiometry (SPA), developed in 1963 and adapted for infants by Steichen et al. in 1976, is an important tool to quantitate bone mineralization in infants. Studies of infants in which SPA was used include studies of fetal bone mineralization and postnatal bone mineralization in very low birth weight infants. The SPA technique has also been used as a research tool to investigate longitudinal bone mineralization and to study the effect of nutrition and disease processes such as rickets or osteopenia of prematurity. At present, it has little direct clinical application for diagnosing bone disease in single patients. The bones most often used to measure bone mineral content (BMC) are the radius, the ulna, and, less often, the humerus. The radius appears to be preferred as a suitable bone to measure BMC in infants. It is easily accessible; anatomic reference points are easily palpated and have a constant relationship to the radial mid-shaft site; soft tissue does not affect either palpation of anatomic reference points or BMC quantitation in vivo. The peripheral location of the radius minimizes body radiation exposure. Trabecular and cortical bone can be measured separately. Extensive background studies exist on radial BMC in small infants. Most important, the radius has a relatively long zone of constant BMC. Finally, SPA for BMC in the radius has a high degree of precision and accuracy. 61 references.
Steichen, J.J.; Asch, P.A.; Tsang, R.C.
Single-photon absorptiometry (SPA), developed in 1963 and adapted for infants by Steichen et al. in 1976, is an important tool to quantitate bone mineralization in infants. Studies of infants in which SPA was used include studies of fetal bone mineralization and postnatal bone mineralization in very low birth weight infants. The SPA technique has also been used as a research tool to investigate longitudinal bone mineralization and to study the effect of nutrition and disease processes such as rickets or osteopenia of prematurity. At present, it has little direct clinical application for diagnosing bone disease in single patients. The bones most often used to measure bone mineral content (BMC) are the radius, the ulna, and, less often, the humerus. The radius appears to be preferred as a suitable bone to measure BMC in infants. It is easily accessible; anatomic reference points are easily palpated and have a constant relationship to the radial mid-shaft site; soft tissue does not affect either palpation of anatomic reference points or BMC quantitation in vivo. The peripheral location of the radius minimizes body radiation exposure. Trabecular and cortical bone can be measured separately. Extensive background studies exist on radial BMC in small infants. Most important, the radius has a relatively long zone of constant BMC. Finally, SPA for BMC in the radius has a high degree of precision and accuracy. 61 references
Záchia, Suzana; Knauth, Daniela; Goldim, José R; Chachamovich, Juliana R; Chachamovich, Eduardo; Paz, Ana H; Felberbaum, Ricardo; Crosignani, PierGiorgio; Tarlatzis, Basil C; Passos, Eduardo P
With the development of medical technology, many countries around the world have been implementing ethical guidelines and laws regarding Medically Assisted Reproduction (MAR). A physician's reproductive decisions are not solely based on technical criteria but are also influenced by society values. Therefore, the aim of this study was to analyze the factors prioritized by MAR professionals when deciding on whether to accept to perform assisted reproduction and to show any existing cultural differences. Cross-sectional study involving 224 healthcare professionals working with assisted reproduction in Brazil, Italy, Germany and Greece. Instrument used for data collection: a questionnaire, followed by the description of four special MAR cases (a single woman, a lesbian couple, an HIV discordant couple and gender selection) which included case-specific questions regarding the professionals' decision on whether to perform the requested procedure as well as the following factors: socio-demographic variables, moral and legal values as well as the technical aspects which influence decision-making. Only the case involving a single woman who wishes to have a child (without the intention of having a partner in the future) demonstrated significant differences. Therefore, the study was driven towards the results of this case specifically. The analyses we performed demonstrated that professionals holding a Master's Degree, those younger in age, female professionals, those having worked for less time in reproduction, those in private clinics and Brazilian health professionals all had a greater tendency to perform the procedure in that case. A multivariate analysis demonstrated that the reasons for the professional's decision to perform the procedure were the woman's right to gestate and the duty of MAR professionals to help her. The professionals who decided not to perform the procedure identified the woman's marital status and the child's right to a father as the reason to
Background With the development of medical technology, many countries around the world have been implementing ethical guidelines and laws regarding Medically Assisted Reproduction (MAR). A physician's reproductive decisions are not solely based on technical criteria but are also influenced by society values. Therefore, the aim of this study was to analyze the factors prioritized by MAR professionals when deciding on whether to accept to perform assisted reproduction and to show any existing cultural differences. Methods Cross-sectional study involving 224 healthcare professionals working with assisted reproduction in Brazil, Italy, Germany and Greece. Instrument used for data collection: a questionnaire, followed by the description of four special MAR cases (a single woman, a lesbian couple, an HIV discordant couple and gender selection) which included case-specific questions regarding the professionals' decision on whether to perform the requested procedure as well as the following factors: socio-demographic variables, moral and legal values as well as the technical aspects which influence decision-making. Results Only the case involving a single woman who wishes to have a child (without the intention of having a partner in the future) demonstrated significant differences. Therefore, the study was driven towards the results of this case specifically. The analyses we performed demonstrated that professionals holding a Master's Degree, those younger in age, female professionals, those having worked for less time in reproduction, those in private clinics and Brazilian health professionals all had a greater tendency to perform the procedure in that case. A multivariate analysis demonstrated that the reasons for the professional's decision to perform the procedure were the woman's right to gestate and the duty of MAR professionals to help her. The professionals who decided not to perform the procedure identified the woman's marital status and the child's right to a
Vilallonga, Ramon; Balibrea, José Maria; Curell, Anna; Gonzalez, Oscar; Caubet, Enric; Ciudin, Andrea; Ortiz-Zúñiga, Angel Michael; Fort, José Manuel
Laparoscopic single anastomosis duodenoileal bypass with sleeve gastrectomy (SADI-S) is a recently developed one- or two-stage operation based on biliopancreatic diversion that is used to treat morbid obesity. Some midterm outcomes suggest that malabsorption is a possible complication following the procedure. Therefore, conversion to a less malabsorptive procedure may be required. We aim to describe and analyze the outcomes after laparoscopic conversion of SADI-S to non-malabsorptive or less malabsorptive procedures. From January 2015 to April 2017, five patients underwent laparoscopic conversion to single anastomosis duodenojejunal bypass with sleeve gastrectomy (SADJ-S) (video) following SADI-S, and one female patient underwent laparoscopic conversion to gastric bypass (GBP) following SADI-S, after presenting with severe protein-calorie malnutrition, nutritional deficiencies, poor quality of life, or increased number of bowel movements. Mean preoperative BMI was 24.0 kg/m 2 (20.4-27.5 kg/m 2 ). Four patients underwent SADI-S to SADJ-S conversions and one underwent a SADI-S to Roux-en-Y duodenojejunal bypass. All cases were performed laparoscopically. No relevant postoperative complications or mortality was reported and the mean hospital stay was 4.6 days. Malabsorptive symptoms resolved in all patients. All patients experienced weight regain. Mean BMI increase was 7.1 kg/m 2 (5-10.8 kg/m 2 ). Outcomes of laparoscopic conversion to SADJ-S or GBP after SADI-S were acceptable, showing clinical improvement of malnutrition, nutritional deficiencies, and quality of life in all cases. Weight regain must be advised. These techniques appear feasible and free of severe long-term complications. Further investigation is warranted to understand the best common channel length for patients undergoing SADI-S.
This nationally representative study, encompassing all single youth (15-24 years), was carried out on the subpopulation of Ethiopia DHS 2000 to determine the influences of socio-demographic characteristics on sexual behaviour, and assess the knowledge and awareness of HIV/AIDS and other STIs. There were a total of 890 male and 3,988 female youth. 25.5% of males and 16.1% of females ever had sexual intercourse. Among these, 65.8% males and 24.6% females had two or more sexual partners in the last 12 months. Condom use in the last sexual act was reported by 22.7% and 10% of male and female youth. 19.4% of male and 22.2% of female youth who ever had sexual intercourse ever used family planning method. Although the majority of youth is aware of HIV/AIDS, awareness about other STIs is low. On binary logistic regression analysis, the odds of ever having sexual intercourse were higher for the employed and older youth. Male urban youth was more likely to ever have sexual intercourse than male rural youth (Adjusted OR 4.2; 95% CI 1.8-9.5). Male youth with some form of education were more likely to use condom (Adjusted OR 4.9; 95% CI 1.01-24.7). Female youth with some form of education, the risk of ever having sexual intercourse was reduced by 50% but they were more likely to report having 2 sexual partners in the last 12 months (Adjusted OR 2.1; 95% CI 1.1-4.1). Female youth who had media exposure were more likely to report having 2 sexual partners in the last 12 months (Adjusted OR 2.9; 95% CI 1.3-6.8) but more likely to use condom during last sexual intercourse (Adjusted OR 15.7; 95% CI2.2-117). Among single Ethiopian youth the overall sexual activity is relatively lower than reported from other African countries but high risk sexual behaviour is common. Socio-demographic factors influence youth sexual behaviour.
Full Text Available In this paper, dynamic analysis of a multi-battery dual mode charger, powered by a single solar array and suitable for lead-acid and lithium-ion cell-based batteries is presented. Each battery is interfaced to the solar array by means of a current-controlled buck power stage, operating either in constant power or constant voltage mode. Operation in former/latter charging mode implies regulating input/output voltage of the converter, which is a non-trivial situation since while feeding different batteries, all the converters share the same input terminals, connected to the solar array. It is revealed that when at least one of the batteries operates in constant power charging mode, open-loop instability occurs whenever converter input voltage is lower than maximum power point voltage of the solar array. Consequently, input voltage regulating controller must be designed to stabilize closed-loop dynamics for the worst case of instability, which is also derived. Moreover, it is shown that the dynamics of the converters operating under output voltage control are perceived as disturbances by input voltage control loop and must be properly rejected. Simple loop shaping design is proposed based on a PI controller, allowing stabilizing the system in case of worst case instability and rejecting output voltage control induced disturbances at the expense of non-constant, operating-point dependent closed-loop damping.
Tomov, Borislav Gueorguiev; Jensen, Jørgen Arendt
A new architecture for a compact medical ultrasound beamformer has been developed. Combination of novel and known principles has been utilized, leading to low processing power requirements and simple analog circuitry. Usage of a field programmable gate array (FPGA) for the digital signal processing...... provides programming flexibility. First, sparse sample processing is performed by generating the in-phase and quadrature beamformed signals. Hereby only 512 samples are beamformed for each line in an image. That leads to a 15-fold decrease in the number of operations and enables the use of Delta-Sigma (ΔΣ....... The control logic consists of few adders and counters and requires very limited resources. Fourth, the beamformer is fully programmable. Any channel can be set to use an arbitrary delay curve, and any number of these channels can be used together in an extendable modular multi-channel system. A prototype...
Taft, Jeffrey D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
The report describes work done on Grid Architecture under the auspices of the Department of Electricity Office of Electricity Delivery and Reliability in 2015. As described in the first Grid Architecture report, the primary purpose of this work is to provide stakeholder insight about grid issues so as to enable superior decision making on their part. Doing this requires the creation of various work products, including oft-times complex diagrams, analyses, and explanations. This report provides architectural insights into several important grid topics and also describes work done to advance the science of Grid Architecture as well.
Avgeriou, Paris; Kruchten, Philippe; Lago, Patricia; Grisham, Paul; Perry, Dewayne
The shift of the software architecture community towards architectural knowledge has brought along some promising research directions. In this workshop we discuss the issues that lead to the application of architectural knowledge in research and industrial practice as well as presenting ongoing
Jacobson, Nathan S.; Biering, Robert C.
A translucent crystal concentrates and transmits energy to a heat exchanger, which in turn heats a propellant gas, working gas of a dynamic power system, or a thermopile. Materials are the limiting issue in such a system. Central is the durability of the crystal, which must maintain the required chemical, physical/optical, and mechanical properties as it is heated and cooled. This report summarizes available data to date on the materials issues with this system. We focus on the current leading candidate materials, which are sapphire (Al2O3) for higher temperatures and silica (SiO2) for lower temperatures. We use data from thermochemical calculations; laboratory coupon tests with silica and sapphire; and system tests with sapphire. The required chemical properties include low-vapor pressure and interfacial stability with supporting structural materials. Optical properties such as transmittance and index of refraction must be maintained. Thermomechanical stability is a major challenge for a large, single-crystal ceramic and has been discussed in another report. In addition to the crystal, other materials in the proposed system include refractory metals (Nb, Ta, Mo, W, and Re), carbon (C), and high-temperature ceramic insulation. The major issue here is low levels of oxygen, which lead to volatile refractory metal oxides and rapid consumption of the refractory metal. Interfacial reactions between the ceramic crystal and refractory metal are also discussed. Finally, high-temperature ceramic insulating materials are also likely to be used in this system. Outgassing is a major issue for these materials. The products of outgassing are typically reactive with the refractory metals and must be minimized.
Christensen, Henrik Bærbak; Hansen, Klaus Marius
Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...
Vandenbulcke, Benoît; fallon, Harold; Second international conference on structures and architecture
The authors are partners of the Brussels's based architectural firm AgwA. AgwA is involved in a large amount of architecture competitions, mainly for public buildings addressing the community. These competition projects are developed in multidisciplinary teams. In the work of AgwA, structure plays a central role in the architectural designs and their spatiality. The context of an architecture competition has important consequences on the way architects can approach the issue of structure.
Afridi, Muhammad Idrees; Zhang, Jie; Zhao, Yong-li; Latif, Abdul; Niazi, Shahab Ahmed
A time interleaved differential phase shift keying (DPSK) remodulation technique is proposed to mitigate the effect of Rayleigh backscattering (RBS)-induced noise in a single fiber colorless wavelength-division-multiplexing passive optical network (WDM-PON). In order to achieve a cost effective optical network unit (ONU) solution without dedicated laser sources for upstream signals to provide optimum symmetric capacity in a colorless WDM-PON, remodulation becomes the core attraction. Also as the performance of colorless WDM-PON systems suffers from the transmission impairments due to RBS, it is mitigated by using this remodulation scheme. Simulation results show that downstream and upstream signals achieve the error-free performance at 10 Gbit/s with negligible penalty, and enhance the tolerance to RBS-induced noise over a 25 km single-mode fiber.
Mauro, Christian;Sunyaev, Ali;Leimeister, Jan Marco;Schweiger, Andreas;Krcmar, Helmut
This paper describes a single sign-on solution for the central management of health care provider?s smart cards in hospitals. The proposed approach which is expected to be an improvement over current methods is made possible through the introduction of a national healthcare telematics infrastructure in Germany where every physician and every patient will automatically be given an electronic health smart card (for patients) and a corresponding health professional card (for health care provider...
Full Text Available Travel is a powerful force in shaping the perception of the modern world and plays an ever-growing role within architectural and urban cultures. Inextricably linked to political and ideological issues, travel redefines places and landscapes through new transport infrastructures and buildings. Architecture, in turn, is reconstructed through visual and textual narratives produced by scores of modern travellers — including writers and artists along with architects themselves. In the age of the camera, travel is bound up with new kinds of imaginaries; private records and recollections often mingle with official, stereotyped views, as the value of architectural heritage increasingly rests on the mechanical reproduction of its images. Whilst students often learn about architectural history through image collections, the place of the journey in the formation of the architect itself shifts. No longer a lone and passionate antiquarian or an itinerant designer, the modern architect eagerly hops on buses, trains, and planes in pursuit of personal as well as professional interests. Increasingly built on a presumption of mobility, architectural culture integrates travel into cultural debates and design experiments. By addressing such issues from a variety of perspectives, this collection, a special 'Architectural Histories' issue on travel, prompts us to rethink the mobile conditions in which architecture has historically been produced and received.
Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius
A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...
Bardram, Jakob; Christensen, Henrik Bærbak; Hansen, Klaus Marius
A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...
Oosterhuis, K.; Xia, X.
This is the second issue (of twelve) of iA bookzine. iA brings together interdisciplinary perspectives to the topic of "Interactive Architecture" (IA) - from researchers, students, guest lecturers from Hyperbody), and experts from other organizations. This second issue, like the first, consists of
Redfern, Andrew; Koplow, Michael; Wright, Paul
Most residential heating, ventilating, and air-conditioning (HVAC) systems utilize a single zone for conditioning air throughout the entire house. While inexpensive, these systems lead to wide temperature distributions and inefficient cooling due to the difference in thermal loads in different rooms. The end result is additional cost to the end user because the house is over conditioned. To reduce the total amount of energy used in a home and to increase occupant comfort there is a need for a better control system using multiple temperature zones. Typical multi-zone systems are costly and require extensive infrastructure to function. Recent advances in wireless sensor networks (WSNs) have enabled a low cost drop-in wireless vent register control system. The register control system is controlled by a master controller unit, which collects sensor data from a distributed wireless sensor network. Each sensor node samples local settings (occupancy, light, humidity and temperature) and reports the data back to the master control unit. The master control unit compiles the incoming data and then actuates the vent resisters to control the airflow throughout the house. The control system also utilizes a smart thermostat with a movable set point to enable the user to define their given comfort levels. The new system can reduce the run time of the HVAC system and thus decreasing the amount of energy used and increasing the comfort of the home occupations.
Full Text Available Due to its extreme simplicity and flexibility, the IEEE 802.11 standard is the dominant technology to implement both infrastructure-based WLANs and single-hop ad hoc networks. In spite of its popularity, there is a vast literature demonstrating the shortcomings of using the 802.11 technology in such environments, such as dramatic degradation of network capacity as contention increases and vulnerability to external interferences. Therefore, the design of enhancements and optimizations for the original 802.11 MAC protocol has been a very active research area in the last years. However, all these modifications to the 802.11 MAC protocol were validated only through simulations and/or analytical investigations. In this paper, we present a very unique work as we have designed a flexible hardware/software platform, fully compatible with current implementations of the IEEE 802.11 technology, which we have used to concretely implement and test an enhanced 802.11 backoff algorithm. Our experimental results clearly show that the enhanced mechanism outperforms the standard 802.11 MAC protocol in real scenarios.
Deriu, Davide; Piccoli, Edoardo; Turan Özkaya, Belgin
Travel is a powerful force in shaping the perception of the modern world and plays an ever-growing role within architectural and urban cultures. Inextricably linked to political and ideological issues, travel redefines places and landscapes through new transport infrastructures and buildings. Architecture, in turn, is reconstructed through visual and textual narratives produced by scores of modern travellers — including writers and artists along with architects themselves. In the age of the c...
Holmgren, Steen; Svensson, Ole
of urban architecture be developed? This research project attempts to answer these questions through a discourse on theories and methods and the development of "dialogue methods" by which professionals can learn about residents' perception of the urban architecture of their area, thus achieving a better...... and without obvious architectural value. These issues raise pertinent questions: what urban architectural problems and qualities exist in the complex, inner suburbs? What differences exist between professionals' and residents' perceptions and assessments of urban architecture? How can a shared language...
Munro, J.K. Jr.
Until recently, digital control systems have been implemented on centralized processing systems to function in one of several ways: (1) as a single processor control system; (2) as a supervisor at the top of a hierarchical network of multiple processors; or (3) in a client-server mode. Each of these architectures uses a very different set of communication protocols. The latter two architectures also belong to the category of distributed control systems. Distributed control systems can have a central focus, as in the cases just cited, or be quite decentralized in a loosely coupled, shared responsibility arrangement. This last architecture is analogous to autonomous hosts on a local area network. Each of the architectures identified above will have a different set of architecture-associated issues to be addressed in the verification and validation activities during software development. This paper summarizes results of efforts to identify, describe, contrast, and compare these issues
Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sensing, actuating, or other mechanisms that enable buildings to interact with their users and surroundings in real time in the real world through physical or sensory change and variation.
Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sensing, actuating, or other mechanisms that enable buildings to interact with their users and surroundings in real time in the real world through physical or sensory change and variation.
Full Text Available In the development of mobile robotic systems, a robotic architecture plays a crucial role in interconnecting all the sub-systems and controlling the system. The design of robotic architectures for mobile autonomous robots is a challenging...
Randell, B.; Treleaven, P.C.
This book is a collection of course papers which discusses the latest (1982) milestone of electronic building blocks and its effect on computer architecture. Contributions range from selecting a VLSI process technology to Japan's Fifth Generation Computer Architecture. Contents, abridged: VLSI and machine architecture. Graphic design aids: HED and FATFREDDY. On the LUCIFER system. Clocking of VLSI circuits. Decentralised computer architectures for VLSI. Index.
North Dakota Univ., Fargo. Dept. of Agriculture and Applied Science.
Situational issues related to families and influences upon families in North Dakota and the United States are briefly outlined in these fact sheets. Contents specifically concern (1) outbound migration from North Dakota and transition of rural families from farming; (2) suicide in North Dakota and the nation; (3) child care issues, such as child…
Erickson, Mary; Delahunt, Michael
Most art teachers would agree that architecture is an important form of visual art, but they do not always include it in their curriculums. In this article, the authors share core ideas from "Architecture and Environment," a teaching resource that they developed out of a long-term interest in teaching architecture and their fascination with the…
Full Text Available The large amounts of EST sequence data available from a single species of an organism as well as for several species within a genus provide an easy source of identification of intra- and interspecies single nucleotide polymorphisms (SNPs. In the case of model organisms, the data available are numerous, given the degree of redundancy in the deposited EST data. There are several available bioinformatics tools that can be used to mine this data; however, using them requires a certain level of expertise: the tools have to be used sequentially with accompanying format conversion and steps like clustering and assembly of sequences become time-intensive jobs even for moderately sized datasets. We report here a pipeline of open source software extended to run on multiple CPU architectures that can be used to mine large EST datasets for SNPs and identify restriction sites for assaying the SNPs so that cost-effective CAPS assays can be developed for SNP genotyping in genetics and breeding applications. At the International Crops Research Institute for the Semi-Arid Tropics (ICRISAT, the pipeline has been implemented to run on a Paracel high-performance system consisting of four dual AMD Opteron processors running Linux with MPICH. The pipeline can be accessed through user-friendly web interfaces at http://hpc.icrisat.cgiar.org/PBSWeb and is available on request for academic use. We have validated the developed pipeline by mining chickpea ESTs for interspecies SNPs, development of CAPS assays for SNP genotyping, and confirmation of restriction digestion pattern at the sequence level.
Taft, Jeffrey D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); De Martini, Paul [California Inst. of Technology (CalTech), Pasadena, CA (United States)
This paper addresses architecture for grid sensor networks, with primary emphasis on distribution grids. It describes a forward-looking view of sensor network architecture for advanced distribution grids, and discusses key regulatory, financial, and planning issues.
Gschwind, Michael K [Chappaqua, NY
Mechanisms for implementing a floating point only single instruction multiple data instruction set architecture are provided. A processor is provided that comprises an issue unit, an execution unit coupled to the issue unit, and a vector register file coupled to the execution unit. The execution unit has logic that implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA). The floating point vector registers of the vector register file store both scalar and floating point values as vectors having a plurality of vector elements. The processor may be part of a data processing system.
Mulder, H A; Crump, R E; Calus, M P L; Veerkamp, R F
In recent years, it has been shown that not only is the phenotype under genetic control, but also the environmental variance. Very little, however, is known about the genetic architecture of environmental variance. The main objective of this study was to unravel the genetic architecture of the mean and environmental variance of somatic cell score (SCS) by identifying genome-wide associations for mean and environmental variance of SCS in dairy cows and by quantifying the accuracy of genome-wide breeding values. Somatic cell score was used because previous research has shown that the environmental variance of SCS is partly under genetic control and reduction of the variance of SCS by selection is desirable. In this study, we used 37,590 single nucleotide polymorphism (SNP) genotypes and 46,353 test-day records of 1,642 cows at experimental research farms in 4 countries in Europe. We used a genomic relationship matrix in a double hierarchical generalized linear model to estimate genome-wide breeding values and genetic parameters. The estimated mean and environmental variance per cow was used in a Bayesian multi-locus model to identify SNP associated with either the mean or the environmental variance of SCS. Based on the obtained accuracy of genome-wide breeding values, 985 and 541 independent chromosome segments affecting the mean and environmental variance of SCS, respectively, were identified. Using a genomic relationship matrix increased the accuracy of breeding values relative to using a pedigree relationship matrix. In total, 43 SNP were significantly associated with either the mean (22) or the environmental variance of SCS (21). The SNP with the highest Bayes factor was on chromosome 9 (Hapmap31053-BTA-111664) explaining approximately 3% of the genetic variance of the environmental variance of SCS. Other significant SNP explained less than 1% of the genetic variance. It can be concluded that fewer genomic regions affect the environmental variance of SCS than the
Mulder, H.A.; Crump, R.E.; Calus, M.P.L.; Veerkamp, R.F.
In recent years, it has been shown that not only is the phenotype under genetic control, but also the environmental variance. Very little, however, is known about the genetic architecture of environmental variance. The main objective of this study was to unravel the genetic architecture of the mean
Lorenz, Wolfgang E.
In Fractals smaller parts and the whole are linked together. Fractals are self-similar, as those parts are, at least approximately, scaled-down copies of the rough whole. In architecture, such a concept has also been known for a long time. Not only architects of the twentieth century called for an overall idea that is mirrored in every single detail, but also Gothic cathedrals and Indian temples offer self-similarity. This study mainly focuses upon the question whether this concept of self-similarity makes architecture with fractal properties more diverse and interesting than Euclidean Modern architecture. The first part gives an introduction and explains Fractal properties in various natural and architectural objects, presenting the underlying structure by computer programmed renderings. In this connection, differences between the fractal, architectural concept and true, mathematical Fractals are worked out to become aware of limits. This is the basis for dealing with the problem whether fractal-like architecture, particularly facades, can be measured so that different designs can be compared with each other under the aspect of fractal properties. Finally the usability of the Box-Counting Method, an easy-to-use measurement method of Fractal Dimension is analyzed with regard to architecture.
’Catalyst Architecture’ takes its point of departure in a broadened understanding of the role of architecture in relation to developmental problems in large cities. Architectural projects frame particular functions and via their form language, they can provide the user with an aesthetic experience....... The broadened understanding of architecture consists in that an architectural project, by virtue of its placement in the context and of its composition of programs, can have a mediating role in a positive or cultural development of the district in question. In this sense, we talk about architecture as catalyst...... cities on the planet have growing pains and social cohesiveness is under pressure from an increased difference between rich and poor, social segregation, ghettoes, immigration of guest workers and refugees, commercial mass tourism etc. In this context, it is important to ask which role architecture...
Full Text Available The paper presents security issues and architectures for mobile applications and GSM infrastructure. The article also introduces the idea of a new secure architecture for an inter-sector electronic wallet used in payments - STP4EW (Secure Transmission Protocol for Electronic Wallet
Eckes, Suzanne Elizabeth; McCall, Stephanie D.
Purpose: This article examines the role social science has played in litigation involving public single-sex educational programs. It also explores a body of social science research related to gender and education that we believe could assist the courts and school leaders in better examining the possibilities and the limitations of single-sex…
Kiib, Hans; Marling, Gitte; Hansen, Peter Mandal
How can architecture promote the enriching experiences of the tolerant, the democratic, and the learning city - a city worth living in, worth supporting and worth investing in? Catalyst Architecture comprises architectural projects, which, by virtue of their location, context and their combination...... of programs, have a role in mediating positive social and/or cultural development. In this sense, we talk about architecture as a catalyst for: sustainable adaptation of the city’s infrastructure appropriate renovation of dilapidated urban districts strengthening of social cohesiveness in the city development...
Sandev, T.; Stamenov, R.; Misevska, A.; Georgievska-Dimitrevski, B.; Angelovski, G.
In this paper we present the electronic system for application and issuing licenses for export, import and transit of goods (EXIM), particularly for ionizing radiation sources, in the Republic of Macedonia. This system is a modern and helpful tool for simple issuing licenses, for establishing a unique database and it represents a harmonized system for exchanging information between the governmental, public and private legal persons in the Republic of Macedonia. (author)
Jonkers, Henk; Lankhorst, Marc M.; ter Doest, Hugo W.L.; Arbab, Farhad; Bosma, Hans; Wieringa, Roelf J.
This is an editorial to a special issue of ISF on enterprise architecture.We define the concept of enterprise architecture, notivate its importance, and then introduce the papers in this special issue.
This dissertation addresses the reductive reading of Georges Bataille's work done within the field of architectural criticism and theory which tends to set aside the fundamental ‘broken’ totality of Bataille's oeuvre and also to narrowly interpret it as a mere critique of architectural form,
Carrer, Marco; von Arx, Georg; Castagneri, Daniele; Petit, Giai
Trees are among the best natural archives of past environmental information. Xylem anatomy preserves information related to tree allometry and ecophysiological performance, which is not available from the more customary ring-width or wood-density proxy parameters. Recent technological advances make tree-ring anatomy very attractive because time frames of many centuries can now be covered. This calls for the proper treatment of time series of xylem anatomical attributes. In this article, we synthesize current knowledge on the biophysical and physiological mechanisms influencing the short- to long-term variation in the most widely used wood-anatomical feature, namely conduit size. We also clarify the strong mechanistic link between conduit-lumen size, tree hydraulic architecture and height growth. Among the key consequences of these biophysical constraints is the pervasive, increasing trend of conduit size during ontogeny. Such knowledge is required to process time series of anatomical parameters correctly in order to obtain the information of interest. An appropriate standardization procedure is fundamental when analysing long tree-ring-related chronologies. When dealing with wood-anatomical parameters, this is even more critical. Only an interdisciplinary approach involving ecophysiology, wood anatomy and dendrochronology will help to distill the valuable information about tree height growth and past environmental variability correctly. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: email@example.com.
Poletto, Marco; Pasquero, Claudia
This is a manual investigating the subject of urban ecology and systemic development from the perspective of architectural design. It sets out to explore two main goals: to discuss the contemporary relevance of a systemic practice to architectural design, and to share a toolbox of informational...... design protocols developed to describe the city as a territory of self-organization. Collecting together nearly a decade of design experiments by the authors and their practice, ecoLogicStudio, the book discusses key disciplinary definitions such as ecologic urbanism, algorithmic architecture, bottom......-up or tactical design, behavioural space and the boundary of the natural and the artificial realms within the city and architecture. A new kind of "real-time world-city" is illustrated in the form of an operational design manual for the assemblage of proto-architectures, the incubation of proto...
Holmgren, Steen; Svensson, Ole
In Denmark new issues in urban renewal are being introduced. Legislation on urban renewal now demands that residents be invited to take an active part in the development of their urban area. And urban renewal is increasingly taking place in inner suburbs which are recently built, complex...... and without obvious architectural value. These issues raise pertinent questions: what urban architectural problems and qualities exist in the complex, inner suburbs? What differences exist between professionals' and residents' perceptions and assessments of urban architecture? How can a shared language...... of urban architecture be developed? This research project attempts to answer these questions through a discourse on theories and methods and the development of "dialogue methods" by which professionals can learn about residents' perception of the urban architecture of their area, thus achieving a better...
Christensen, Henrik Bærbak; Hansen, Klaus Marius
Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... prototypes include end-user or business related functionality rather than purely architectural functionality. Based on these observations we provide recommendations for effective industrial architectural prototyping....
Human civilization and architecture have defined each other for over 5000 years on Earth. Even in the novel environment of space, persistent issues of human urbanism will eclipse, within a historically short time, the technical challenges of space settlement that dominate our current view. By adding modern topics in space engineering, planetology, life support, human factors, material invention, and conservation to their already renaissance array of expertise, urban designers can responsibly apply ancient, proven standards to the exciting new opportunities afforded by space. Inescapable facts about the Moon set real boundaries within which tenable lunar urbanism and its component architecture must eventually develop.
Tvedebrink, Tenna Doktor Olsen
This PhD thesis is motived by a personal interest in the theoretical, practical and creative qualities of architecture. But also a wonder and curiosity about the cultural and social relations architecture represents through its occupation with both the sciences and the arts. Inspired by present i...... with the material appearance of objects, but also the imaginary world of dreams and memories which are concealed with the communicative significance of intentions when designing the future super hospitals....... initiatives in Aalborg Hospital to overcome patient undernutrition by refurbishing eating environments, this thesis engages in an investigation of the interior architectural qualities of patient eating environments. The relevance for this holistic perspective, synthesizing health, food and architecture......, is the current building of a series of Danish ‘super hospitals’ and an increased focus among architectural practices on research-based knowledge produced with the architectural sub-disciplines Healing Architecture and Evidence-Based Design. The problem is that this research does not focus on patient eating...
Toft, Tanya Søndergaard
The article proposes the urban digital gallery as an opportunity to explore the relationship between ‘human’ and ‘technology,’ through the programming of media architecture. It takes a curatorial perspective when proposing an ontological shift from considering media facades as visual spectacles...... agency and a sense of being by way of dematerializing architecture. This is achieved by way of programming the symbolic to provide new emotional realizations and situations of enlightenment in the public audience. This reflects a greater potential to humanize the digital in media architecture....
Folmer, Mette Blicher; Mullins, Michael; Frandsen, Anne Kathrine
The project examines how architecture and design of space in the intensive unit promotes or hinders interaction between relatives and patients. The primary starting point is the relatives. Relatives’ support and interaction with their loved ones is important in order to promote the patients healing...... process. Therefore knowledge on how space can support interaction is fundamental for the architect, in order to make the best design solutions. Several scientific studies document that the hospital's architecture and design are important for human healing processes, including how the physical environment...... architectural and design solutions in order to improve quality of interaction between relative and patient in the hospital's intensive unit....
The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...
de Graaf, K.A.; Tang, A.; Liang, P.; van Vliet, J.C.
A common approach to software architecture documentation in industry projects is the use of file-based documents. This approach offers a single-dimensional perspective on the architectural knowledge contained. Knowledge retrieval from file-based architecture documentation is efficient if the
Bergmann, N.; Smit, Gerardus Johannes Maria; Kokkeler, Andre B.J.; Platzner, M.; Wolkotte, P.T.; Teich, J.; Holzenspies, P.K.F.; van de Burgwal, M.D.; Heysters, P.M.
We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a
This book presents contributions of drawing and text along with their many relationalities from ontology to history and vice versa in a range of reflections on architecture, drawing and topology. We hope to thereby indicate the potential of the theme in understanding not only the architecture...... of today, but – perhaps most importantly – also creating and producing architecture that is contemporaneous and reacts to the radical changes of the physical world which surrounds us in the increasingly artificial measures of new materialities and understandings thereof. The contributions range from...... the intricate issues of the imagination and the moving ratio in the topological culture, over urban topology, diagrammatisation, mediality and dynamics of transduction in the contemporary artificial environment....
Sturgeon, Matthew R. [Former ORNL postdoc; Hu, Michael Z. [ORNL
This paper has reviewed the frontier field of “architectured membranes” that contains anisotropic oriented porous nanostructures of inorganic materials. Three example types of architectured membranes were discussed with some relevant results from our own research: (1) anodized thin-layer titania membranes on porous anodized aluminum oxide (AAO) substrates of different pore sizes, (2) porous glass membranes on alumina substrate, and (3) guest-host membranes based on infiltration of yttrium-stabilized zirconia inside the pore channels of AAO matrices.
Phase II trials have been very widely conducted and published every year for cancer clinical research. In spite of the fast progress in design and analysis methods, single-arm two-stage design is still the most popular for phase II cancer clinical trials. Because of their small sample sizes, statistical methods based on large sample approximation are not appropriate for design and analysis of phase II trials. As a prospective clinical research, the analysis method of a phase II trial is predetermined at the design stage and it is analyzed during and at the end of the trial as planned by the design. The analysis method of a trial should be matched with the design method. For two-stage single arm phase II trials, Simon's method has been the standards for choosing an optimal design, but the resulting data have been analyzed and published ignoring the two-stage design aspect with small sample sizes. In this article, we review analysis methods that exactly get along with the exact two-stage design method. We also discuss some statistical methods to improve the existing design and analysis methods for single-arm two-stage phase II trials. Copyright © 2015 Elsevier Inc. All rights reserved.
Hsu, Chia-Hsin; Chen, Chien-Kuo; Hwang, Ming-Jing
Protein domain architectures (PDAs), in which single domains are linked to form multiple-domain proteins, are a major molecular form used by evolution for the diversification of protein functions. However, the design principles of PDAs remain largely uninvestigated. In this study, we constructed networks to connect domain architectures that had grown out from the same single domain for every single domain in the Pfam-A database and found that there are three main distinctive types of these networks, which suggests that evolution can exploit PDAs in three different ways. Further analysis showed that these three different types of PDA networks are each adopted by different types of protein domains, although many networks exhibit the characteristics of more than one of the three types. Our results shed light on nature's blueprint for protein architecture and provide a framework for understanding architectural design from a network perspective.
Brax, Saara A.; Bask, Anu; Hsuan, Juliana
Purpose: Services are highly important in a world economy which has increasingly become service driven. There is a growing need to better understand the possibilities for, and requirements of, designing modular service architectures. The purpose of this paper is to elaborate on the roots of the e......Purpose: Services are highly important in a world economy which has increasingly become service driven. There is a growing need to better understand the possibilities for, and requirements of, designing modular service architectures. The purpose of this paper is to elaborate on the roots...... of the emerging research stream on service modularity, provide a concise overview of existing work on the subject, and outline an agenda for future research on service modularity and architecture. The articles in the special issue offer four diverse sets of research on service modularity and architecture. Design....../methodology/approach: The paper is built on a literature review mapping the current body of literature on the topic and developing future research directions in service modularity and architecture. Findings: The growing focus on services has triggered needs to investigate the suitability and implementation of physical...
to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... expression in the specific housing area. It is the aim of this article to expand the different design strategies which architects can use – to give the individual project attitudes and designs with architectural quality. Through the customized component production it is possible to choose different...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....
Architectural freedom and industrialized architecture. Inge Vestergaard, Associate Professor, Cand. Arch. Aarhus School of Architecture, Denmark Noerreport 20, 8000 Aarhus C Telephone +45 89 36 0000 E-mai l firstname.lastname@example.org Based on the repetitive architecture from the "building boom" 1960...... customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performed expression in direct relation to the given context. Through the last couple of years we have in Denmark been focusing a more sustainable and low energy building technique, which also include...... to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...
Based on the repetitive architecture from the “building boom” from 1960 to 1973, it is discussed how architects can handle these Danish element and montage buildings through the transformation to upgraded aesthetical, functional and energy efficient architecture. The method used is analysis...... of cases, parallels to literature studies and client and producer interviews. The analysis compares best practice in Denmark and best practice in Austria. Modern architects accepted the fact that industrialized architecture told the storey of repetition and monotony as basic condition. This article aims...... to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...
The PICNIC architecture aims at supporting inter-enterprise integration and the facilitation of collaboration between healthcare organisations. The concept of a Regional Health Economy (RHE) is introduced to illustrate the varying nature of inter-enterprise collaboration between healthcare organisations collaborating in providing health services to citizens and patients in a regional setting. The PICNIC architecture comprises a number of PICNIC IT Services, the interfaces between them and presents a way to assemble these into a functioning Regional Health Care Network meeting the needs and concerns of its stakeholders. The PICNIC architecture is presented through a number of views relevant to different stakeholder groups. The stakeholders of the first view are national and regional health authorities and policy makers. The view describes how the architecture enables the implementation of national and regional health policies, strategies and organisational structures. The stakeholders of the second view, the service viewpoint, are the care providers, health professionals, patients and citizens. The view describes how the architecture supports and enables regional care delivery and process management including continuity of care (shared care) and citizen-centred health services. The stakeholders of the third view, the engineering view, are those that design, build and implement the RHCN. The view comprises four sub views: software engineering, IT services engineering, security and data. The proposed architecture is founded into the main stream of how distributed computing environments are evolving. The architecture is realised using the web services approach. A number of well established technology platforms and generic standards exist that can be used to implement the software components. The software components that are specified in PICNIC are implemented in Open Source.
to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...... to this systematic thinking of the building technique we get a diverse and functional architecture. Creating a new and clearer story telling about new and smart system based thinking behind the architectural expression....
Naessens, James M; Culbertson, Richard A; Lefante, John J; Campbell, Claudia R
Attempts to provide information to consumers about patient safety on specific hospitals have conflicted with organization self-perceptions and led to confusion among the general public. This article presents organizational theory framework and criteria to classify organizations as single versus multiple reporting entities. Operational definitions are presented. A case study comparing institutions both within and across state boundaries in the Mayo Clinic Health System is used to demonstrate their utility. The study includes analysis of an employee survey on employee satisfaction and patient safety climate in 2004 among nurses and physicians at the 2 Mayo Clinic hospitals in Rochester, Minn. The criteria for a single organization are more strongly supported for the Mayo Clinic hospitals located in the same city than for hospitals in the same system but separated geographically. Although there is debate about the measurement of organizational culture, employee surveys provide some evidence of a commonality across hospitals in the same city. The case study comparing institutions both within and across state boundaries in the Mayo Clinic Health System demonstrate the utility of the proposed criteria.
Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural geometry, meanwhile contains a great wealth of individual contributions which are relevant in various fields. For mathematicians, the relation to discrete differential geometry is significant, in particular the integrable system viewpoint. Besides, new application contexts have become available for quite some old-established concepts. Regarding graphics and geometry processing, architectural geometry yields interesting new questions but also new objects, e.g. replacing meshes by other combinatorial arrangements. Numerical optimization plays a major role but in itself would be powerless without geometric understanding. Summing up, architectural geometry has become a rewarding field of study. We here survey the main directions which have been pursued, we show real projects where geometric considerations have played a role, and we outline open problems which we think are significant for the future development of both theory and practice of architectural geometry.
Petersen, Rikke Premer
engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...
collaboration: How can qualitative anthropological approaches contribute to contemporary architecture? And just as importantly: What can anthropologists learn from architects’ understanding of spatial and material surroundings? Recent theoretical developments in anthropology stress the role of materials......Architecture and anthropology have always had a common focus on dwelling, housing, urban life and spatial organisation. Current developments in both disciplines make it even more relevant to explore their boundaries and overlaps. Architects are inspired by anthropological insights and methods......, while recent material and spatial turns in anthropology have also brought an increasing interest in design, architecture and the built environment. Understanding the relationship between the social and the physical is at the heart of both disciplines, and they can obviously benefit from further...
Architecture and anthropology have always had a common focus on dwelling, housing, urban life and spatial organisation. Current developments in both disciplines make it even more relevant to explore their boundaries and overlaps. Architects are inspired by anthropological insights and methods......, while recent material and spatial turns in anthropology have also brought an increasing interest in design, architecture and the built environment. Understanding the relationship between the social and the physical is at the heart of both disciplines, and they can obviously benefit from further...... collaboration: How can qualitative anthropological approaches contribute to contemporary architecture? And just as importantly: What can anthropologists learn from architects’ understanding of spatial and material surroundings? Recent theoretical developments in anthropology stress the role of materials...
a functional framework for these concepts, but tries increasingly to endow the main idea of the cultural project with a spatially aesthetic expression - a shift towards “experience architecture.” A great number of these projects typically recycle and reinterpret narratives related to historical buildings......In this essay, I focus on the combination of programs and the architecture of cultural projects that have emerged within the last few years. These projects are characterized as “hybrid cultural projects,” because they intend to combine experience with entertainment, play, and learning. This essay...... identifies new rationales related to this development, and it argues that “cultural planning” has increasingly shifted its focus from a cultural institutional approach to a more market-oriented strategy that integrates art and business. The role of architecture has changed, too. It not only provides...
anthropology. On the one hand, there are obviously good reasons for developing architecture based on anthropological insights in local contexts and anthropologically inspired techniques for ‘collaborative formation of issues’. Houses and built environments are huge investments, their life expectancy...... and other spaces that architects are preoccupied with. On the other hand, the distinction between architecture and design is not merely one of scale. Design and architecture represent – at least in Denmark – also quite different disciplinary traditions and methods. Where designers develop prototypes......, architects tend to work with models and plans that are not easily understood by lay people. Further, many architects are themselves sceptical towards notions of user-involvement and collaborative design. They fear that the imagination of citizens and users is restricted to what they are already familiar with...
I would like to thank Prof. Stephen Read (2011) and Prof. Andrew Benjamin (2011) for both giving inspiring and elaborate comments on my article “Dwelling in-between walls: the architectural surround”. As I will try to demonstrate below, their two different responses not only supplement my article...... focuses on how the absence of an initial distinction might threaten the endeavour of my paper. In my reply to Read and Benjamin, I will discuss their suggestions and arguments, while at the same time hopefully clarifying the postphenomenological approach to architecture....
Full Text Available As the sustainability of contemporary cities has gained emphasis, interest in architecture has increased, due to its social and public responsibility. Since sustainability is linked to public values, research on sustainable public spaces is an important way to secure sustainability in cities. Based on this, we analyzed the sustainability of European cities by examining the design methods of public architecture according to the region. The aim of the study is to derive architectural methodology corresponding to local characteristics, and to suggest issues to consider in public architecture design to promote urban sustainability based on this. First, regarding the environmental aspect, it can be observed that there is an effort to secure sustainability. Second, in terms of social sustainability, historical value remains as a trace of architectural place, so that it continues in people’s memory. In addition, public architecture provides public places where citizens can gather and enjoy programs, while the architectural methods showed differences influenced by cultural conditions. Third, in economic sustainability, it was shown that energy saving was achieved through cost reduction through recycling of materials, facilities, or environmental factors. In conclusion, the issues to be considered in public architectural design are the voiding of urban space through architectural devices in the construction method. In other words, the intention is to form “ground” that attempts to be part of the city, and thereby create better places. Since skin and material have a deep relationship with the environment, they should have the durability and an outer skin that are suitable for the regional environment. Finally, sustainability is to be utilized through the influx of programs that meet local and environmental characteristics. Design research into public architecture that is oriented towards urban sustainability will be a task to be carried out by the
of green architecture. The paper argues that this greenification of facades is insufficient. The green is only a skin cladding the exterior envelope without having a spatial significance. Through the paper it is proposed to flip the order of words from green architecture to architectural green...... that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...
Full Text Available Nowadays, architectural software systems are increasingly important because they can determine the success of the entire system. In this article we intend to rigorously analyze the most common types of systems architectures and present a personal opinion about the specifics of the university architecture. After analyzing monolithic architectures, SOA architecture and those of the micro- based services, we present specific issues and specific criteria for the university software systems. Each type of architecture is rundown and analyzed according to specific academic challenges. During the analysis, we took into account the factors that determine the success of each architecture and also the common causes of failure. At the end of the article, we objectively decide which architecture is best suited to be implemented in the university area.
Qiu, Li Yan; Bae, You Han
Polymers occupy a major portion of materials used for controlled release formulations and drug-targeting systems because this class of materials presents seemingly endless diversity in topology and chemistry. This is a crucial advantage over other classes of materials to meet the ever-increasing requirements of new designs of drug delivery formulations. The polymer architecture (topology) describes the shape of a single polymer molecule. Every natural, seminatural, and synthetic polymer falls into one of categorized architectures: linear, graft, branched, cross-linked, block, star-shaped, and dendron/dendrimer topology. Although this topic spans a truly broad area in polymer science, this review introduces polymer architectures along with brief synthetic approaches for pharmaceutical scientists who are not familiar with polymer science, summarizes the characteristic properties of each architecture useful for drug delivery applications, and covers recent advances in drug delivery relevant to polymer architecture.
Hennessy, John L
The era of seemingly unlimited growth in processor performance is over: single chip architectures can no longer overcome the performance limitations imposed by the power they consume and the heat they generate. Today, Intel and other semiconductor firms are abandoning the single fast processor model in favor of multi-core microprocessors--chips that combine two or more processors in a single package. In the fourth edition of Computer Architecture, the authors focus on this historic shift, increasing their coverage of multiprocessors and exploring the most effective ways of achieving parallelis
Iacob, Maria-Eugenia; Jonkers, Henk; van der Torre, Leon; de Boer, Frank S.; Bonsangue, Marcello; Stam, Andries W.; Lankhorst, Marc M.; Quartel, Dick A.C.; Aldea, Adina; Lankhorst, Marc
This chapter also explains what the added value of enterprise architecture analysis techniques is in addition to existing, more detailed, and domain-specific ones for business processes or software, for example. Analogous to the idea of using the ArchiMate enterprise modelling language to integrate
Textile Spaces presents different approaches to using textile as a spatial definer and artistic medium. The publication collages images and text, art and architecture, science, philosophy and literature, process and product, past, present and future. It forms an insight into soft materials...
Heimdal, Elisabeth Jacobsen
Textiles can be used as building skins, adding new aesthetic and functional qualities to architecture. Just like we as humans can put on a coat, buildings can also get dressed. Depending on our mood, or on the weather, we can change coat, and so can the building. But the idea of using textiles...
Hung, Che-Lun; Hua, Guan-Jie
With the rapid growth of next generation sequencing technologies, such as Slex, more and more data have been discovered and published. To analyze such huge data the computational performance is an important issue. Recently, many tools, such as SOAP, have been implemented on Hadoop and GPU parallel computing architectures. BLASTP is an important tool, implemented on GPU architectures, for biologists to compare protein sequences. To deal with the big biology data, it is hard to rely on single GPU. Therefore, we implement a distributed BLASTP by combining Hadoop and multi-GPUs. The experimental results present that the proposed method can improve the performance of BLASTP on single GPU, and also it can achieve high availability and fault tolerance.
Full Text Available With the rapid growth of next generation sequencing technologies, such as Slex, more and more data have been discovered and published. To analyze such huge data the computational performance is an important issue. Recently, many tools, such as SOAP, have been implemented on Hadoop and GPU parallel computing architectures. BLASTP is an important tool, implemented on GPU architectures, for biologists to compare protein sequences. To deal with the big biology data, it is hard to rely on single GPU. Therefore, we implement a distributed BLASTP by combining Hadoop and multi-GPUs. The experimental results present that the proposed method can improve the performance of BLASTP on single GPU, and also it can achieve high availability and fault tolerance.
the retrofitting of the existing concrete element blocks from the period. Related to the actual demands to the building physic problems a new industrialized period has started based on light-weight elements basically made of wooden structures and faced with different suitable materials meant for individual...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....
Full Text Available This study investigates sustainable architecture and reasons of its usage. Architecture is under influence of a range of socio-economic aspects including but not limited environmental, social, cultural, economical problems and the connection between these issues as well as fashion, religion, climate, and etc. Concerning vernacular architecture and introducing the unseen principles of sustainable architecture in it, are an effective method in order to introduce sustainable architecture, so it will cause renewed focusing on vernacular architecture and through using it converts architectural topics to the modern and international issues. Of course, vernacular architecture was sustainable in its own time and place, so it’s pointless to renouncing it. The north Iranian architecture is a kind of architecture that has maintained its basis of nativism. Principles of sustainable architecture is considered in it, which is studied in this article. This descriptive study’s results let us know the important role of North Iranian vernacular architectures in creating a sustainable approach in architecture.
Full Text Available The architecture of villas stands out as one of the recognizable characteristics of Vrnjačka Banja's physical structure and as a distinctive type of objects forming the tourist offer. Analyses of position, function and importance of villa architecture in shaping the identity of Vrnjačka Banja are based on the conviction that organized space and built environment, as a result of design and planning processes, have decisive role in forming the identity of places and making them recognizable. In this paper, architectural elements that characterize this type of objects are being analyzed. Also, the role that singled out elements have at higher urban levels, firstly in creating characteristic, recognizable architectural and urban ensembles, and consequently in identity forming, is pointed out. These issues are considered in terms of tourism development, as a precondition for making recognizable city with possibilities for branding, that consequently improve the exploiting of the tourist potentials.
Svenningsen Kajita, Heidi
Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art......Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art...
Pnina Avidar; Beatriz Ramo; dr. Marc Glaudemans
First year students of architecture studied contemporary architectural discourse and develop critical standpoints against the macho-style heroic interpretation of architecture's power to transform the world. The disproportionate focus on iconographic architecture is being criticized. The book is a
sentence level knowledge base is trained by reading 70 classic literatures. Our test case is extracted from the book “Great Expectation” by Charles ... Dickens . The text consists of 96767 letters or 23912 words. The text has not been read during the training process. In order to explicitly control the
Trends changing from "fad" status to acceptance as the norm for contemporary schools are flexibility, adaptability, a reduction in fenestration, compactness, use of color, carpeting, and many new construction materials. (Author/MLF)
without being able to visualize it in drawing. Architectural design, in other words, to a large extent happens through drawing. Hence, to neglect drawing skills is to neglect an important capacity to create architectural design. While the current-day argument for the depreciation of drawing skills...... is that computers can represent graphic ideas both faster and better than most medium-skilled draftsmen, drawing in design is not only about representing final designs. In fact, several steps involving the capacity to draw lie before the representation of a final design. Not only is drawing skills an important...... prerequisite for learning about the nature of existing objects and spaces, and thus to build a vocabulary of design. It is also a prerequisite for both reflecting and communicating about design ideas. In this paper, a taxonomy of notation, reflection, communication and presentation drawing is presented...
Full Text Available The old Greek word "kosmos" means not only "cosmos", but also "the beautiful order", "the way of building", "building", "scenography", "mankind", and, in the time of the New Testament, also "pagans". The word "arhitekton", meaning first the "master of theatrical scenography", acquired the meaning of "builder", when the words "kosmos" and ~kosmetes" became pejorative. The fear that architecture was not considered one of the arts before Renaissance, since none of the Muses supervised the art of building, results from the misunderstanding of the word "kosmos". Urania was the Goddes of the activity implied in the verb "kosmein", meaning "to put in the beautiful order" - everything, from the universe to the man-made space, i. e. the architecture.
A novel wavelength reused bidirectional RoF-WDM-PON architecture to mitigate reflection and Rayleigh backscattered noise in multi-Gb/s m-QAM OFDM SSB upstream and downstream transmission over a single fiber
Patel, Dhananjay; Dalal, U. D.
A novel m-QAM Orthogonal Frequency Division Multiplexing (OFDM) Single Sideband (SSB) architecture is proposed for centralized light source (CLS) bidirectional Radio over Fiber (RoF) - Wavelength Division Multiplexing (WDM) - Passive Optical Network (PON). In bidirectional transmission with carrier reuse over the single fiber, the Rayleigh Backscattering (RB) noise and reflection (RE) interferences from optical components can seriously deteriorate the transmission performance of the fiber optic systems. These interferometric noises can be mitigated by utilizing the optical modulation schemes at the Optical Line Terminal (OLT) and Optical Network Unit (ONU) such that the spectral overlap between the optical data spectrum and the RB and RE noise is minimum. A mathematical model is developed for the proposed architecture to accurately measure the performance of the transmission system and also to analyze the effect of interferometric noise caused by the RB and RE. The model takes into the account the different modulation schemes employed at the OLT and the ONU using a Mach Zehnder Modulator (MZM), the optical launch power and the bit-rates of the downstream and upstream signals, the gain of the amplifiers at the OLT and the ONU, the RB-RE noise, chromatic dispersion of the single mode fiber and optical filter responses. In addition, the model analyzes all the components of the RB-RE noise such as carrier RB, signal RB, carrier RE and signal RE, thus providing the complete representation of all the physical phenomena involved. An optical m-QAM OFDM SSB signal acts as a test signal to validate the model which provides excellent agreement with simulation results. The SSB modulation technique using the MZM at the OLT and the ONU differs in the data transmission technique that takes place through the first-order higher and the lower optical sideband respectively. This spectral gap between the downstream and upstream signals reduces the effect of Rayleigh backscattering and
Read the architecture means address issues of structure, type, homogeneous categories. It means to give connotation to the signs, highlight significant and symbols, measures and relationships. The construction of an architecture is the result of a design. Each design is completely in order with standards and regulations. Places of city, which are subject to the rules, order and govern the space. In residential areas there is, however, an unusual form of mutation of the architecture. The resid...
Takes a unique systems approach to programming and architecture of the VAXUsing the VAX as a detailed example, the first half of this book offers a complete course in assembly language programming. The second describes higher-level systems issues in computer architecture. Highlights include the VAX assembler and debugger, other modern architectures such as RISCs, multiprocessing and parallel computing, microprogramming, caches and translation buffers, and an appendix on the Berkeley UNIX assembler.
Bang, Jacob Sebastian
the photographs as a starting point for a series of paintings. This way of creating representations of something that already exists is for me to see a way forward in the "decoding" of my own models into other depictions. The models are analyzed through a series of representations in different types of drawings....... I try to invent the ways of drawing the models - that decode and unfold them into architectural fragments- into future buildings or constructions in the landscape.  Luigi Moretti: Italian architect, 1907 - 1973  Man Ray: American artist, 1890 - 1976. in 2015, I saw the wonderful exhibition...
Buchgeher, Georg; Weinreich, Rainer
Software architectures are still typically defined and described independently from implementation. To avoid architectural erosion and drift, architectural representation needs to be continuously updated and synchronized with system implementation. Existing approaches for architecture representation like informal architecture documentation, UML diagrams, and Architecture Description Languages (ADLs) provide only limited support for connecting architecture descriptions and implementations. Architecture management tools like Lattix, SonarJ, and Sotoarc and UML-tools tackle this problem by extracting architecture information directly from code. This approach works for low-level architectural abstractions like classes and interfaces in object-oriented systems but fails to support architectural abstractions not found in programming languages. In this paper we present an approach for linking and continuously synchronizing a formalized architecture representation to an implementation. The approach is a synthesis of functionality provided by code-centric architecture management and UML tools and higher-level architecture analysis approaches like ADLs.
Cuevas, P; Outeiriño, L A; Azanza, C; Giménez-Gallego, G
Among the age-related diseases that affect vision, age-related macular degeneration is the most frequent cause of blindness in patients older than 60 years. In this communication, we report the full anatomical and functional recovery of a patient diagnosed with wet age-related macular degeneration 1 year after a single intravitreal injection of dobesilate. PMID:24225910
Sonnenwald, Diane H.
Some of the issues (and their consequences) that arise when human-network interfaces (HNIs) are viewed from the perspective of people who use and develop them are examined. Target attributes of HNI architecture are presented. A high-level architecture model that supports the attributes is discussed...
Catalyst Architecture for Stable Single Atom Dispersion Enables Site-Specific Spectroscopic and Reactivity Measurements of CO Adsorbed to Pt Atoms, Oxidized Pt Clusters, and Metallic Pt Clusters on TiO2.
DeRita, Leo; Dai, Sheng; Lopez-Zepeda, Kimberly; Pham, Nicholas; Graham, George W; Pan, Xiaoqing; Christopher, Phillip
Oxide-supported precious metal nanoparticles are widely used industrial catalysts. Due to expense and rarity, developing synthetic protocols that reduce precious metal nanoparticle size and stabilize dispersed species is essential. Supported atomically dispersed, single precious metal atoms represent the most efficient metal utilization geometry, although debate regarding the catalytic activity of supported single precious atom species has arisen from difficulty in synthesizing homogeneous and stable single atom dispersions, and a lack of site-specific characterization approaches. We propose a catalyst architecture and characterization approach to overcome these limitations, by depositing ∼1 precious metal atom per support particle and characterizing structures by correlating scanning transmission electron microscopy imaging and CO probe molecule infrared spectroscopy. This is demonstrated for Pt supported on anatase TiO 2 . In these structures, isolated Pt atoms, Pt iso , remain stable through various conditions, and spectroscopic evidence suggests Pt iso species exist in homogeneous local environments. Comparing Pt iso to ∼1 nm preoxidized (Pt ox ) and prereduced (Pt metal ) Pt clusters on TiO 2 , we identify unique spectroscopic signatures of CO bound to each site and find CO adsorption energy is ordered: Pt iso ≪ Pt metal atoms bonded to TiO 2 and that Pt iso exhibits optimal reactivity because every atom is exposed for catalysis and forms an interfacial site with TiO 2 . This approach should be generally useful for studying the behavior of supported precious metal atoms.
The Etruscan religion was characterized by divination methods, aimed at interpreting the will of the gods. These methods were revealed by the gods themselves and written in the books of the Etrusca Disciplina. The books are lost, but parts of them are preserved in the accounts of later Latin sources. According to such traditions divination was tightly connected with the Etruscan cosmovision of a Pantheon distributed in equally spaced, specific sectors of the celestial realm. We explore here the possible reflections of such issues in the Etruscan architectural remains.
The Future of Information Architecture examines issues surrounding why information is processed, stored and applied in the way that it has, since time immemorial. Contrary to the conventional wisdom held by many scholars in human history, the recurrent debate on the explanation of the most basic categories of information (eg space, time causation, quality, quantity) has been misconstrued, to the effect that there exists some deeper categories and principles behind these categories of information - with enormous implications for our understanding of reality in general. To understand this, the b
Carpenter, James Russell; Bauer, Frank H. (Technical Monitor)
A fundamental issue for estimation and control of distributed systems such as formation flying spacecraft is the information exchange architecture. In centralized schemes, each subordinate need only share its measurement data with a central hub, and the subordinates depend on the center to direct their actions. In decentralized schemes, all nodes participate in the data exchange, so that each has the same in by formation as the center, and may thereby self-direct the same action that the center would have commanded, assuming all share a common goal. This talk compares and contrasts the centralized and decentralized schemes in the context of autonomously maintaining a distributed satellite formation.
Baik, A.; Boehm, J.
As with many historical buildings around the world, building façades are of special interest; moreover, the details of such windows, stonework, and ornaments give each historic building its individual character. Each object of these buildings must be classified in an architectural object library. Recently, a number of researches have been focusing on this topic in Europe and Canada. From this standpoint, the Hijazi Architectural Objects Library (HAOL) has reproduced Hijazi elements as 3D computer models, which are modelled using a Revit Family (RFA). The HAOL will be dependent on the image survey and point cloud data. The Hijazi Object such as Roshan and Mashrabiyah, become as vocabulary of many Islamic cities in the Hijazi region such as Jeddah in Saudi Arabia, and even for a number of Islamic historic cities such as Istanbul and Cairo. These architectural vocabularies are the main cause of the beauty of these heritage. However, there is a big gap in both the Islamic architectural library and the Hijazi architectural library to provide these unique elements. Besides, both Islamic and Hijazi architecture contains a huge amount of information which has not yet been digitally classified according to period and styles. Due to this issue, this paper will be focusing on developing of Heritage BIM (HBIM) standards and the HAOL library to reduce the cost and the delivering time for heritage and new projects that involve in Hijazi architectural styles. Through this paper, the fundamentals of Hijazi architecture informatics will be provided via developing framework for HBIM models and standards. This framework will provide schema and critical information, for example, classifying the different shapes, models, and forms of structure, construction, and ornamentation of Hijazi architecture in order to digitalize parametric building identity.
Full Text Available Footprint 19 focuses on the more recent roles of architecture in the contemporary spaces of conflict. Departing from a spatial understanding of geopolitical, climatological and economical conflicts, the various contributions highlight the large scale and phenomenal transitions in the physical world and in society by extrapolating, through examples, the abundance of relations that can be traced between conflict, territory and architecture. Conflict areas often prove to be fertile grounds for innovation and for the emergence of new spatial forms. The issue reports on the state of perpetual global unrest in architecture through a series of articles and case studies that highlight the consequences of conflicts in the places and spaces that we inhabit. In the introduction, these are discussed as an interlinked global reality rather than as isolated incidents. In doing so, the contemporary spaces of conflict are positioned in the context of emerging global trends, conditions, and discourses in the attempt to address their indicative symptoms while reflecting on their underlying causes.
Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.J.
This report presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses interoperability and integration issues in multi-provider multi-domain heterogeneous Cloud based infrastructure services and applications provisioning, including integration and
Full Text Available Single-crystal angular-resolved magnetometry and wavefunction-based calculations have been used to reconsider the magnetic properties of a recently reported DyIII-based single-molecule magnet, namely [Dy(hfac3(L1] with hfac− = 1,1,1,5,5,5-hexafluoroacetylacetonate and L1 = 2-(4,5-bis(propylthio-1,3-dithiol-2-ylidene-6-(pyridin-2-yl-5H-[1,3]dithiolo[4',5':4,5]benzo[1,2-d]imidazole. The magnetic susceptibility and magnetization at low temperature are found to be strongly influenced by supramolecular interactions. Moreover, taking into account the hydrogen-bond networks in the calculations allows to explain the orientation of the magnetic axes. This strongly suggests that hydrogen bonds play an important role in the modulation of the electrostatic environment around the DyIII center that governs the nature of its magnetic ground-state and the orientation of its anisotropy axes. We thus show here that SMM properties that rely on supramolecular organization may not be transferable into single-molecule devices.
strategies which architects can use - to give the individual project attitudes and designs with architectural quality. Through the customized component production it is possible to choose many different proportions, to organize the process at site choosing either one room components or several rooms...... customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performed expression in direct relation to the given context. Through the last couple of years we have in Denmark been focusing a more sustainable and low energy building technique, which also include...
Parcher, Jon F; Wang, Mei; Chittiboyina, Amar G; Khan, Ikhlas A
A discussion of the definition, advantages, and issues with the formation of ions in the transition region between an electrospray ionization (ESI) source and the ion optics of a mass analyzer is presented. The various types of ions formed in the so-called in-source collision-induced dissociation (IS-CID) process are illustrated. Applications of IS-CID with single-stage mass analyzers, such as structure elucidation and quantitation, are demonstrated. The discussion is illustrated by examples of the in-source fragmentation of ginkgolides, which are marker compounds found only in Ginkgo biloba. Supercritical fluid chromatography (SFC) with non-aqueous eluents was used to achieve a fast resolution of the ginkgolides without the hydrolysis reactions possible with aqueous high-performance liquid chromatography (HPLC) eluents. In-source ion generation occurs at relatively high pressures (ca. 1-3 torr) compared to the low pressure normally observed in collision chambers of tandem mass spectrometry (MS/MS). As a result, the fragmentation process is complex and often generates ions other than the fragments observed with classic CID or the same ions at different intensities. The objective of the current tutorial is to illustrate the conditions under which single-stage, quadrupole or time-of-flight mass analyzers with electrospray or in-air (direct analysis in real time; DART) ionization can be used for quantitation and structure elucidation in a manner similar to that observed with MS/MS. While the low m/z (≤ [M±H] ± ) ions formed in-source often duplicate the ions observed in MS/MS systems, it is the focus of this discussion to illustrate the utility of in-source generated fragment ions that may not be observed or observed at different intensities than in the collision cells of MS/MS instruments. Copyright © 2017 John Wiley & Sons, Ltd.
Tupper, Charles D
Data Architecture: From Zen to Reality explains the principles underlying data architecture, how data evolves with organizations, and the challenges organizations face in structuring and managing their data. It also discusses proven methods and technologies to solve the complex issues dealing with data. The book uses a holistic approach to the field of data architecture by covering the various applied areas of data, including data modelling and data model management, data quality , data governance, enterprise information management, database design, data warehousing, and warehouse design. This book is a core resource for anyone emplacing, customizing or aligning data management systems, taking the Zen-like idea of data architecture to an attainable reality.
Attention is given to the component design and optical configuration features of a generic optical linear algebra processor (OLAP) architecture, as well as the large number of OLAP architectures, number representations, algorithms and applications encountered in current literature. Number-representation issues associated with bipolar and complex-valued data representations, high-accuracy (including floating point) performance, and the base or radix to be employed, are discussed, together with case studies on a space-integrating frequency-multiplexed architecture and a hybrid space-integrating and time-integrating multichannel architecture.
Tvedebrink, Tenna Doktor Olsen; Fisker, Anna Marie; Kirkegaard, Poul Henning
In the attempt to improve patient treatment and recovery, researchers focus on applying concepts of hospitality to hospitals. Often these concepts are dominated by hotel-metaphors focusing on host–guest relationships or concierge services. Motivated by a project trying to improve patient treatment...... is known for his writings on theatricality, understood as a holistic design approach emphasizing the contextual, cultural, ritual and social meanings rooted in architecture. Relative hereto, the International Food Design Society recently argued, in a similar holistic manner, that the methodology used...... to provide an aesthetic eating experience includes knowledge on both food and design. Based on a hermeneutic reading of Semper’s theory, our thesis is that this holistic design approach is important when debating concepts of hospitality in hospitals. We use this approach to argue for how ‘food design...
Springer, Paul L.
.4.3 of PVM had previously been enhanced by the addition of a new architecture, BEOLIN, which allowed a PVM user to abstract a Beowulf class computer with a private network to appear as a single system, visible to the outside world, which could spawn tasks on different internal nodes.
Jul 16, 2016 ... reproduced. Every culture includes values, principles and fundamentals that affect other aspects ... Given that, the emphasis on cultural issues in architecture has begun since the past four decades. (Baydar ... disregarding this importance in today's designs, and due to shortage of scientific and research.
Full Text Available The global financial crisis of 2007–2008 highlighted the need to re-evaluate several well established tenets in the world of finance. Questions have been raised the world over about the existing paradigm, leading to an acceptance that new financial architecture needed to be evolved and that new models need to emerge, keeping in mind the multiplicity of socio-economic realities that exist round the globe. In this context, the imperative for a new financial architecture in India is quite evident, and the ensuing panel discussion throws up some India-specific issues that need to be explored by the various stakeholders involved in this attempt.
Eardley, P; Chan, K.; Charny, A.; Geib, R.; Karagiannis, Georgios; Menth, M.; Tsou, T.; Eardley, P
This document describes a general architecture for flow admission and termination based on pre-congestion information in order to protect the quality of service of established, inelastic flows within a single Diffserv domain.
STATE OF ARCHITECTUREArchitectural ChaosRelation of Technology and Architecture The Many Faces of Architecture The Scope of Enterprise Architecture The Need for Enterprise ArchitectureThe History of Architecture The Current Environment Standardization Barriers The Need for Lightweight Architecture in the EnterpriseThe Cost of TechnologyThe Benefits of Enterprise Architecture The Domains of Architecture The Gap between Business and ITWhere Does LEA Fit? LEA's FrameworkFrameworks, Methodologies, and Approaches The Framework of LEATypes of Methodologies Types of ApproachesActual System Environmen
Oussalah , Mourad Chabane
Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template
Oussalah, Mourad Chabanne
Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa
Christensen, Henrik Bærbak
In this paper, we outline an on-going project of designing distributed embedded systems for closed-loop process control. The project is a joint effort between software architecture researchers and developers from two companies that produce commercial embedded process control systems. The project...... has a strong emphasis on software architectural issues and terminology in order to envision, design and analyze design alternatives. We present two results. First, we outline how focusing on software architecture, architectural issues and qualities are beneficial in designing distributed, embedded......, systems. Second, we present two different architectures for closed-loop process control and discuss benefits and reliabilities....
Zdun, Uwe; Avgeriou, Paris
Architectural patterns are a key point in architectural documentation. Regrettably, there is poor support for modeling architectural patterns, because the pattern elements are not directly matched by elements in modeling languages, and, at the same time, patterns support an inherent variability that
Jelić, Andrea; Tieri, Gaetano; De Matteis, Federico; Babiloni, Fabio; Vecchiato, Giovanni
Over the last few years, the efforts to reveal through neuroscientific lens the relations between the mind, body, and built environment have set a promising direction of using neuroscience for architecture. However, little has been achieved thus far in developing a systematic account that could be employed for interpreting current results and providing a consistent framework for subsequent scientific experimentation. In this context, the enactive perspective is proposed as a guide to studying architectural experience for two key reasons. Firstly, the enactive approach is specifically selected for its capacity to account for the profound connectedness of the organism and the world in an active and dynamic relationship, which is primarily shaped by the features of the body. Thus, particular emphasis is placed on the issues of embodiment and motivational factors as underlying constituents of the body-architecture interactions. Moreover, enactive understanding of the relational coupling between body schema and affordances of architectural spaces singles out the two-way bodily communication between architecture and its inhabitants, which can be also explored in immersive virtual reality settings. Secondly, enactivism has a strong foothold in phenomenological thinking that corresponds to the existing phenomenological discourse in architectural theory and qualitative design approaches. In this way, the enactive approach acknowledges the available common ground between neuroscience and architecture and thus allows a more accurate definition of investigative goals. Accordingly, the outlined model of architectural subject in enactive terms-that is, a model of a human being as embodied, enactive, and situated agent, is proposed as a basis of neuroscientific and phenomenological interpretation of architectural experience.
Full Text Available Over the last few years, the efforts to reveal through neuroscientific lens the relations between the mind, body, and built environment have set a promising direction of using neuroscience for architecture. However, little has been achieved thus far in developing a systematic account that could be employed for interpreting current results and providing a consistent framework for subsequent scientific experimentation. In this context, the enactive perspective is proposed as a guide to studying architectural experience for two key reasons. Firstly, the enactive approach is specifically selected for its capacity to account for the profound connectedness of the organism and the world in an active and dynamic relationship, which is primarily shaped by the features of the body. Thus, particular emphasis is placed on the issues of embodiment and motivational factors as underlying constituents of the body-architecture interactions. Moreover, enactive understanding of the relational coupling between body schema and affordances of architectural spaces singles out the two-way bodily communication between architecture and its inhabitants, which can be also explored in immersive virtual reality settings. Secondly, enactivism has a strong foothold in phenomenological thinking that corresponds to the existing phenomenological discourse in architectural theory and qualitative design approaches. In this way, the enactive approach acknowledges the available common ground between neuroscience and architecture and thus allows a more accurate definition of investigative goals. Accordingly, the outlined model of architectural subject in enactive terms – that is, a model of a human being as embodied, enactive, and situated agent, is proposed as a basis of neuroscientific and phenomenological interpretation of architectural experience.
Full Text Available Static Synchronous Series Compensator (SSSC is a series compensating Flexible AC Transmission System (FACTS controller for maintaining to the power flow control on a transmission line by injecting a voltage in quadrature with the line current and in series mode with the line. In this work, an Adaptive Network-based Fuzzy Inference System controller (ANFISC has been proposed for controlling of the SSSC-based damping system and applied to a Single Machine Infinite Bus (SMIB power system. For implementation of the learning process in this controller, we use of the one approach of the learning ability that named as Forward Signal and Backward Error Back-Propagation (FSBEBP method for improving of the system efficiency. This artificial intelligence-based control model leads to a controller with adaptive structure, improved correctness, high damping ability and dynamic performance. System implementation is easy and it requires 49 fuzzy rules for inference engine of the system. As compared with the other complex neuro-fuzzy systems, this controller has medium number of the fuzzy rules and low number of layers, but it has high accuracy. In order to demonstrate of the proposed controller ability, it is simulated and its output compared with that of classic Lead-Lag-based Controller (LLC and PI controller.
Full Text Available Today's general-purpose processors are optimized for maximum throughput. Real-time systems need a processor with both a reasonable and a known worst-case execution time (WCET. Features such as pipelines with instruction dependencies, caches, branch prediction, and out-of-order execution complicate WCET analysis and lead to very conservative estimates. In this paper, we evaluate the issues of current architectures with respect to WCET analysis. Then, we propose solutions for a time-predictable computer architecture. The proposed architecture is evaluated with implementation of some features in a Java processor. The resulting processor is a good target for WCET analysis and still performs well in the average case.
Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 1. Molecule Matters - Dendritic Architecture - A Clever Route to Monodispersed Macromolecules. N Jayaraman. Feature Article Volume 12 Issue 1 January 2007 pp 60-66 ...
Explores the use of analogies in architectural design, the importance of Gestalt theory and aesthetic cannons in understanding and being sensitive to architecture. Emphasizes the variation between public and professional appreciation of architecture. Notes that an understanding of architectural process enables students to improve the aesthetic…
Jansen, Antonius Gradus Johannes
A software architecture can be considered as the collection of key decisions concerning the design of the software of a system. Knowledge about this design, i.e. architectural knowledge, is key for understanding a software architecture and thus the software itself. Architectural knowledge is mostly
Bang, Jacob Sebastian
Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”......Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”...
Taking an off set in the understanding of architectural quality being based on multisensory architecture, the paper aims to discuss the current acoustic discourse in inclusive design and its implications to the integration of inclusive design in architectural discourse and practice as well...... design and architectural quality for people with a hearing disability and a newly conducted qualitative evaluation research in Denmark as well as architectural theories on multisensory aspects of architectural experiences, the paper uses examples of existing Nordic building cases to discuss the role...... of acoustics in both inclusive design and multisensory architecture....
Solomon, D.; van Dijk, A.
The "2002 ESA Lunar Architecture Workshop" (June 3-16) ESTEC, Noordwijk, NL and V2_Lab, Rotterdam, NL) is the first-of-its-kind workshop for exploring the design of extra-terrestrial (infra) structures for human exploration of the Moon and Earth-like planets introducing 'architecture's current line of research', and adopting an architec- tural criteria. The workshop intends to inspire, engage and challenge 30-40 European masters students from the fields of aerospace engineering, civil engineering, archi- tecture, and art to design, validate and build models of (infra) structures for Lunar exploration. The workshop also aims to open up new physical and conceptual terrain for an architectural agenda within the field of space exploration. A sound introduc- tion to the issues, conditions, resources, technologies, and architectural strategies will initiate the workshop participants into the context of lunar architecture scenarios. In my paper and presentation about the development of the ideology behind this work- shop, I will comment on the following questions: * Can the contemporary architectural agenda offer solutions that affect the scope of space exploration? It certainly has had an impression on urbanization and colonization of previously sparsely populated parts of Earth. * Does the current line of research in architecture offer any useful strategies for com- bining scientific interests, commercial opportunity, and public space? What can be learned from 'state of the art' architecture that blends commercial and public pro- grammes within one location? * Should commercial 'colonisation' projects in space be required to provide public space in a location where all humans present are likely to be there in a commercial context? Is the wave in Koolhaas' new Prada flagship store just a gesture to public space, or does this new concept in architecture and shopping evolve the public space? * What can we learn about designing (infra-) structures on the Moon or any other
Full Text Available Bernard Tschumi’s delineation prepared for the Museu de Arte Contemporânea provides the starting point for this essay, which discusses the historicity of drawing and highlights the horizontality and the verticality that structure architecture’s contrast with the pictorial realm. Juxtaposing a freehand sketch with the digital image of the same project, Tschumi moves to address the paradox concerning the position of the body and drawing. This drawing also speaks for the reversal in the position of the body brought about by digital reproductivity.The reversal alludes to Tschumi’s theorization of architecture in terms of space and event. These, I will argue, are anticipated in The Manhattan Transcripts (1981 where a set of freehand drawings is used to evoke a filmic mood wherein the image is projected parallel to the spectator’s seated position. The essay goes further, suggesting that the theatricality permeating the present architecture is part of the shift from horizontality to the painterly, and yet the phenomenon is not merely a technical issue. Rather, it alludes to architecture’s dialogical rapport with painting at work since the Renaissance.
The Service oriented perspective is emerging as an important view both for business architecture and IT architecture in the overall context of enterprise architectures. Many existing enterprise architecture frameworks like DODAF, MODAF and NAF have lately been extended with service-oriented views. The UPDM UML Profile and Metamodel for DODAF and MODAF has thus included various service-oriented views. This thesis proposes a new enterprise architecture framework ESA Enterprise Service Arch...
Zwegers, Arian; Hannus, Matti; Tølle, Martin
, especially concerning integration issues. This paper aims to lay down an architectural framework to support the set-up and operation of virtual enterprises. It supports virtual enterprise engineering. The framework might also be used to identify and position issues that play a role in the set...
Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 11. Electronic Commerce - E-Commerce System Architecture. V Rajaraman. Series Article Volume 5 Issue 11 November 2000 pp 26-36. Fulltext. Click here to view fulltext PDF. Permanent link:
Trubitsyna Natalja Anatolevna
Full Text Available The article discusses the interaction between the wind regime and the landscape. Examples of objects of landscape architecture in high-tech and science-intensive spheres, such as the launch pad of a spacecraft, are given. Wind protection is represented as a result of work on wind power engineering and a means of increasing bioclimatic comfort. The terms of landscape architecture are disclosed and mutual influence on the climate and impact on woody-shrub vegetation and field crops are analyzed. The phenomenon of air permeability for optimal operation of windproof structures and orientations of geoplastics and dendroplastics is described. In this paper, a classification of terrain types is described with a description of their elemental composition, as well as various categories of landscape. The proposal to consider the landscape as a territorial complex, and landscape buildings, landscape-architectural structures as objects of landscape architecture possessing properties of wind protection and air permeability was introduced. Thus, the concept of a landscape-architectural complex as a single group of landscape-architectural objects located on the territory and connected by a common system of communications, functions, technical elements and a visual image is formulated. Further research is based on the rationale for the use of the term ensemble in relation to the objects of the landscape and architectural complex and the identification of their design and planning features that can affect the parameters of wind protection and air permeability. The paper concludes that frequent coincidence of favorable for the fauna wind regime and mimicry of landscape architecture objects. The combination in the landscape of functions for wind protection and aesthetics is analyzed with analysis of such elements of landscape architecture as hedges and windproof properties of green plantations. In the work examples of wind engineering small architectural forms are
Chinas civilization is ancient. The countrys architectural heritage conservation activity is an integral part of the world conservation movement. This paper gives a general introduction of the movement in China from four aspects: (1) history, (2) important conservation projects assessments, (3) new ideas and principles being debated and discussed, and (4) issues facing the movement. The present paper summarizes the essential character of the movement in China and highlights the importance of ...
Lago, P.; Avgeriou, P.; Kruchten, P.; Fickas, S.; Atlee, J.; Inverardi, P.
Architectural knowledge has been recognized by the software architecture community as a self-contained research area in software architecture, and brought along some promising research directions. In this workshop we discuss the issues that lead to the application of architectural knowledge in
This book provides a broad overview of current research in optical interconnect technologies and architectures. Introductory chapters on high-performance computing and the associated issues in conventional interconnect architectures, and on the fundamental building blocks for integrated optical interconnect, provide the foundations for the bulk of the book which brings together leading experts in the field of optical interconnect architectures for data communication. Particular emphasis is given to the ways in which the photonic components are assembled into architectures to address the needs of data-intensive on-chip communication, and to the performance evaluation of such architectures for specific applications. Provides state-of-the-art research on the use of optical interconnects in Embedded Systems; Begins with coverage of the basics for high-performance computing and optical interconnect; Includes a variety of on-chip optical communication topologies; Features coverage of system integration and opti...
Full Text Available Unified Modeling Language (UML has been recognized as one of the most popular techniques to describe static and dynamic aspects of software systems. One of the primary issues in designing software packages is the existence of uncertainty associated with such models. Fuzzy-UML to describe software architecture has both static and dynamic perspective, simultaneously. The evaluation of software architecture design phase initiates always help us find some additional requirements, which helps reduce cost of design. In this paper, we use a fuzzy data model to describe the static aspects of software architecture and the fuzzy sequence diagram to illustrate the dynamic aspects of software architecture. We also transform these diagrams into Petri Nets and evaluate reliability of the architecture. The web-based hotel reservation system for further explanation has been studied.
Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence
Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...... architecture. Following the early aspect paradigm, Tran SAT allows the software architect to design a software architecture stepwise in terms of aspects at the design stage. It realises the evolution as the weaving of new architectural aspects into an existing software architecture....
Francisco Javier Montero Fernández
questions that go beyond quality. Political or commercial interests tend to confuse the opportunity for promotion with the merit of the project. It would be possible to number many competitions which have supposed a significant advance in architecture in the last century; a certain nostalgia for those times of debate which, together with other similar formulas such as entries in biennials, triennials or exhibitions, were capable of making empirical research from direct practice. On the contrary, today the policy framework of the architectural project is often defined in a manner foreign to real architecture, administratively dominated by a process that prioritizes legal and technical compliance over the quality of the project itself, confusing the means with the end. Criticism always aims at the author; it forgets the notable procedures which armed a jury gratuitously exonerated of responsibility or that legal framework that asphyxiates both architecture and the spirit of inquiry which should always prevail.This issue of the journal considers the assimilation of the competition into a research process parallel to an architecture united with quality and progress, an advanced architecture.
Full Text Available Autonomous robot world modelling is a “chicken-and-egg” problem: position estimation needs a model of the world, whereas world modelling needs the robot position. Most of the works dealing with this issue propose holistic solutions under an algorithmic perspective by neglecting software architecture issues. This results in huge and monolithic pieces of software where implementation details reify strategic decisions. An architectural approach founded on separation of concerns may help to break the loop. Localisation and modelling, acting on different time scales, are mostly independent of each other. Sometimes synchronisation is required. Whenever needed, an external strategy tunes the relative rates of the two activities. The paper introduces rationale, design, and implementation of such a system which relies on Real-Time Performers, a software architecture providing suitable architectural abstractions to observe and control the system's temporal behaviour.
Domenico G. Sorrenti
Full Text Available Autonomous robot world modelling is a "chicken-and-egg" problem: position estimation needs a model of the world, whereas world modelling needs the robot position. Most of the works dealing with this issue propose holistic solutions under an algorithmic perspective by neglecting software architecture issues. This results in huge and monolithic pieces of software where implementation details reify strategic decisions. An architectural approach founded on separation of concerns may help to break the loop. Localisation and modelling, acting on different time scales, are mostly independent of each other. Sometimes synchronisation is required. Whenever needed, an external strategy tunes the relative rates of the two activities. The paper introduces rationale, design, and implementation of such a system which relies on Real-Time Performers, a software architecture providing suitable architectural abstractions to observe and control the system's temporal behaviour.
Nguyen, T.; Hinedi, S.; Martin, W.; Tsou, H.
This paper presents various communication system architectures for Multiple-Link communications with Single Aperture (MULSA) ground station. The proposed architectures are capable of supporting a multiplicity of spacecraft that are within the beamwidth of a single ground station antenna simultaneously. Both short and long term proposals to address this scenario will be discussed. In addition, the paper also discusses the top-level system designs of the proposed architectures and attempts to identify the associated advantages and disadvantages for each system.
Dalesio, L.R.; Kozubal, A.J.; Kraimer, M.R.
The Experimental Physics and Industrial Control System (EPICS) provides control and data acquisition for the experimental physics community. Because the capabilities required by the experimental physics community for control were not available through industry, we began the design and implementation of EPICS. It is a distributed process control system built on a software communication bus. The functional subsystems, which provide data acquisition, supervisory control, closed loop control, archiving, and alarm management, greatly reduce the need for programming. Sequential control is provided through a sequential control language, allowing the implementer to express state diagrams easily. Data analysis of the archived data is provided through an interactive tool. The timing system provides distributed synchronization for control and time stamped data for data correlation across nodes in the network. The system is scalable from a single test station with a low channel count to a large distributed network with thousands of channels. The functions provided to the physics applications have proven helpful to the experiments while greatly reducing the time to deliver controls. (author)
Sur-Kolay, Susmita; Nandy, Subhas C; Bagchi, Aditya
This volume contains articles written by leading researchers in the fields of algorithms, architectures, and information systems security. The first five chapters address several challenging geometric problems and related algorithms. These topics have major applications in pattern recognition, image analysis, digital geometry, surface reconstruction, computer vision and in robotics. The next five chapters focus on various optimization issues in VLSI design and test architectures, and in wireless networks. The last six chapters comprise scholarly articles on information systems security coverin
Waqas Kamal, Ahmad; Avgeriou, Paris
Architectural patterns have an impact on both the structure and the behavior of a system at the architecture design level. However, it is challenging to model patterns’ behavior in a systematic way because modeling languages do not provide the appropriate abstractions and because each pattern
Kamal, Ahmad Waqas; Avgeriou, Paris; Morrison, R; Balasubramaniam, D; Falkner, K
Architectural patterns have an impact on both the structure and the behavior of a system at the architecture design level. However, it is challenging to model patterns' behavior in a systematic way because modeling languages do not provide the appropriate abstractions and because each pattern
This project had two goals: To build an emulation prototype board for a tiled architecture and to demonstrate the utility of a global inter-chip free-space photonic interconnection fabric for polymorphous computer architectures (PCA...
National Aeronautics and Space Administration — The goal of the AES Avionics Architectures for Exploration (AAE) project is to develop a reference architecture that is based on standards and that can be scaled and...
Religious Architecture: Anthropological Perspectives develops an anthropological perspective on modern religious architecture, including mosques, churches and synagogues. Borrowing from a range of theoretical perspectives on space-making and material religion, this volume looks at how religious
katalog til udstillingen 'Rhein - Ruhr architecture' Meldahls smedie, 15. marts - 28. april 2002. 99 sider......katalog til udstillingen 'Rhein - Ruhr architecture' Meldahls smedie, 15. marts - 28. april 2002. 99 sider...
Dodda, Ravi Teja; Smith, Chris; van Moorsel, Aad
The emergence of the cloud computing paradigm promises flexibility and adaptability through on-demand provisioning of compute resources. As the utilization of cloud resources extends beyond a single provider, for business as well as technical reasons, the issue of effectively managing such resources comes to the fore. Different providers expose different interfaces to their compute resources utilizing varied architectures and implementation technologies. This heterogeneity poses a significant system management problem, and can limit the extent to which the benefits of cross-cloud resource utilization can be realized. We address this problem through the definition of an architecture to facilitate the management of compute resources from different cloud providers in an homogenous manner. This preserves the flexibility and adaptability promised by the cloud computing paradigm, whilst enabling the benefits of cross-cloud resource utilization to be realized. The practical efficacy of the architecture is demonstrated through an implementation utilizing compute resources managed through different interfaces on the Amazon Elastic Compute Cloud (EC2) service. Additionally, we provide empirical results highlighting the performance differential of these different interfaces, and discuss the impact of this performance differential on efficiency and profitability.
Craft, R.L.; Funkhouser, D.R.; Gallagher, L.K.; Garica, R.J.; Parks, R.C.; Warren, S.
We propose an object-oriented information architecture for telemedicine systems that promotes secure `plug-and-play' interaction between system components through standardized interfaces, communication protocols, messaging formats, and data definitions. In this architecture, each component functions as a black box, and components plug together in a ''lego-like'' fashion to achieve the desired device or system functionality. Introduction Telemedicine systems today rely increasingly on distributed, collaborative information technology during the care delivery process. While these leading-edge systems are bellwethers for highly advanced telemedicine, most are custom-designed and do not interoperate with other commercial offerings. Users are limited to a set of functionality that a single vendor provides and must often pay high prices to obtain this functionality, since vendors in this marketplace must deliver en- tire systems in order to compete. Besides increasing corporate research and development costs, this inhibits the ability of the user to make intelligent purchasing decisions regarding best-of-breed technologies. This paper proposes a reference architecture for plug-and-play telemedicine systems that addresses these issues.
The Winter 2012 (vol. 14 no. 1) issue of the Nexus Network Journal is dedicated to the theme “Architecture, Systems Research and Computational Sciences”. This is an outgrowth of the session by the same name which took place during the eighth international, interdisciplinary conference “Nexus 2010: Relationships between Architecture and Mathematics, held in Porto, Portugal, in June 2010. Today computer science is an integral part of even strictly historical investigations, such as those concerning the construction of vaults, where the computer is used to survey the existing building, analyse the data and draw the ideal solution. What the papers in this issue make especially evident is that information technology has had an impact at a much deeper level as well: architecture itself can now be considered as a manifestation of information and as a complex system. The issue is completed with other research papers, conference reports and book reviews.
Niemann, Hans Henrik; Poulsen, Niels Kjølstad
This paper investigate different controller architectures in connection with controller switching. The controller switching is derived by using the Youla-Jabr-Bongiorno-Kucera (YJBK) parameterization. A number of different architectures for the implementation of the YJBK parameterization...... are described and applied in connection with controller switching. An architecture that does not include inversion of the coprime factors is introduced. This architecture will make controller switching particular simple....
Schaefer, D.H.; Veronis, A.M.; Salland, J.C.
Spatially parallel computing systems that contain thousands of processing elements have a well suited architecture for vision systems. Described is a simple spatially parallel architecture that employs direct visual input and will be capable of being integrated onto a single chip of silicon within the decade. The architecture can determine basic shapes, such as square or triangular, and can determine the number of holes in an object or the number of cavities or inlets in the object. It is able to segment an input image that contains many objects. Algorithms that involve brightness also can be executed. 8 references.
Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...
This paper focuses on the specific knowledge residing in architectural practice. It is based on the research of 35 PhD fellows in the ADAPT-r (Architecture, Design and Art Practice Training-research) project. The ADAPT-r project innovates architectural research in combining expertise from academi...
-, č. 40 (2011), s. 30-31 ISSN 1573-3815 Institutional research plan: CEZ:AV0Z80330511 Keywords : Czech contemporary architecture * Alena Šrámková * Architecture faculty, Prague Subject RIV: AL - Art, Architecture , Cultural Heritage
Roberta M. Feldman
Full Text Available I am impressed but not surprised at how differently Tom, Richard and Iview the question of “affecting change in architectural education.” Tomtook on the more expansive issue of how the broader university might redefineitself through “design thinking” and “design thinkers’” leadership,while Richard gave a concise overview of long held aspirations forarchitectural education and the profession. And I took on architecture’srelationship to society, particularly concerned with “massive societalchanges.” All of us, however, appear to have faith in architecture’sability, using Richard’s words, to “make a difference.” It seems to methat relying on past and even present architecture education models isnot the best strategy.- - - -Change is both pervasive and evasive. In architectural education,evasive may arguably dominate. Although many aspects of change(or the potential therefore might serve as a basis for this discussion,change to mitigate the negative environmental impacts of buildings willbe selected as a case in point. There may be no single issue of greaterlong-term impact facing architectural education and the professions itserves.
Chang, David; Spence, Allan D.; Bigg, Steve; Heslip, Joe; Peterson, John
Although initially the only Coordinate Measuring Machine (CMM) sensor available was a touch trigger probe, technological advances in sensors and computing have greatly increased the variety of available inspection sensors. Non-contact laser digitizers and analog scanning touch probes require very well tuned CMM motion control, as well as an extensible, open architecture interface. This paper describes the implementation of a retrofit CMM motion controller designed for open architecture interface to a variety of sensors. The controller is based on an Intel Pentium microcomputer and a Servo To Go motion interface electronics card. Motor amplifiers, safety, and additional interface electronics are housed in a separate enclosure. Host Signal Processing (HSP) is used for the motion control algorithm. Compared to the usual host plus DSP architecture, single CPU HSP simplifies integration with the various sensors, and implementation of software geometric error compensation. Motion control tuning is accomplished using a remote computer via 100BaseTX Ethernet. A Graphical User Interface (GUI) is used to enter geometric error compensation data, and to optimize the motion control tuning parameters. It is shown that this architecture achieves the required real time motion control response, yet is much easier to extend to additional sensors.
Hansen, Klaus Marius; Christensen, Michael; Sandvad, Elmer
This paper reports from experience obtained through development of a prototype of a global customer service system in a project involving a large shipping company and a university research group. The research group had no previous knowledge of the complex business of shipping and had never worked...... sessions with users, - evolve over a long period of time to contain more functionality - allow for 6-7 developers working intensively in parallel. Explicit focus on the software architecture and letting the architecture evolve with the prototype played a major role in resolving these conflicting...... constraints. Specifically allowing explicit restructuring phases when the architecture became problematic showed to be crucial. ...
For the most part, Goddard solar arrays have been custom designs that are unique to each mission. The solar panel design has been frozen prior to issuing an RFP for their procurement. There has typically been 6-9 months between RFP release and contract award, followed by an additional 24 months for performance of the contract. For Small Explorer (SMEX) missions, with three years between mission definition and launch, this has been a significant problem. The SMEX solar panels have been sufficiently small that the contract performance period has been reduced to 12-15 months. The bulk of this time is used up in the final design definition and fabrication of flight solar cell assemblies. Even so, it has been virtually impossible to have the spacecraft design at a level of maturity sufficient to freeze the solar panel geometry and release the RFP in time to avoid schedule problems with integrating the solar panels to the spacecraft. With that in mind, the SMEX-Lite project team developed a modular architecture for the assembly of solar arrays to greatly reduce the cost and schedule associated with the development of a mission- specific solar array. In the modular architecture, solar cells are fabricated onto small substrate panels. This modular panel (approximately 8.5" x 17" in this case) becomes the building block for constructing solar arrays for multiple missions with varying power requirements and geometrical arrangements. The mechanical framework that holds these modules together as a solar array is the only mission-unique design, changing in size and shape as required for each mission. There are several advantages to this approach. First, the typical solar array development cycle requires a mission unique design, procurement, and qualification including a custom qualification panel. With the modular architecture, a single qualification of the SMEX-Lite modules and the associated mechanical framework in a typical configuration provided a qualification by
Barsdell, B. R.; Barnes, D. G.; Fluke, C. J.
Astronomers have come to rely on the increasing performance of computers to reduce, analyze, simulate and visualize their data. In this environment, faster computation can mean more science outcomes or the opening up of new parameter spaces for investigation. If we are to avoid major issues when implementing codes on advanced architectures, it is important that we have a solid understanding of our algorithms. A recent addition to the high-performance computing scene that highlights this point is the graphics processing unit (GPU). The hardware originally designed for speeding-up graphics rendering in video games is now achieving speed-ups of O(100×) in general-purpose computation - performance that cannot be ignored. We are using a generalized approach, based on the analysis of astronomy algorithms, to identify the optimal problem-types and techniques for taking advantage of both current GPU hardware and future developments in computing architectures.
Full Text Available Este artículo releva la Arquitectura Cultural, que es plural y diversa en términos estéticos y conceptuales. Sugiere la apertura a otras dinámicas de comprensión de lo arquitectónico, a otras lógicas de construcción de las ciudades. Para aclarar el concepto se expone un breve ejemplo práctico./This article points out the "cultural architecture", which is plural and diverse in concept and aesthetic terms. It suggests the opening to other dinamics of comprehention of the architectural issue and the building of cities. The article presents a brief empirical example that clarifies the conceptual approach.
Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence
Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...
on recorders, refrigerators, detergents, and fragrances ? Is the capacities to be modernized. These can be created this not a way to provide garment...ernment Publcations issued by the Superintendent of Back issues or single copies of the DAILY Documents, U.S. Government Printing Office, Wash- REPORTs
Fay Abdulla Al Khalifa
Full Text Available Formal architectural education in Bahrain is relatively young, born only at the beginning of the twentieth century. This paper discusses autonomy in learning architecture, and the effect of using a mixed methods approach combining theoretical and practical assignments on students’ performance and understanding of complex architectural concepts. The study discusses the performance and progress of 81 undergraduate students in the course of Contemporary Architecture. The paper presents the students’ learning process and engagement that occurred throughout the given assignments, theorizing about how students could build on these processes to support their understanding of contemporary architectural and urban issues. The research concludes that both theoretical and practical educations are very helpful in the learning process. Nevertheless, active learning offers distinct advantages to architectural education, especially when combined with group work. The study also shows that while students were able to plan, design and construct spatial installations, they were less capable of reflecting on their projects philosophically. The results indicate the importance of practical experiences in enhancing overall student understanding of architectural phenomena.
Winter, Robert; Fischer, Ronny
After a period where implementation speed was more important than integration, consistency and reduction of complexity, architectural considerations have become a key issue of information management in recent years again. Enterprise architecture is widely accepted as an essential mechanism for ensuring agility and consistency, compliance and efficiency. Although standards like TOGAF and FEAF have developed, however, there is no common agreement on which architecture layers, which artifact typ...
Niemann, Hans Henrik; Stoustrup, Jakob
Browse > Conferences> American Control Conference, Prev | Back to Results | Next » An architecture for implementation of multivariable controllers 786292 searchabstract Niemann, H. ; Stoustrup, J. ; Dept. of Autom., Tech. Univ., Lyngby This paper appears in: American Control Conference, 1999....... Proceedings of the 1999 Issue Date : 1999 Volume : 6 On page(s): 4029 - 4033 vol.6 Location: San Diego, CA Meeting Date : 02 Jun 1999-04 Jun 1999 Print ISBN: 0-7803-4990-3 References Cited: 7 INSPEC Accession Number: 6403075 Digital Object Identifier : 10.1109/ACC.1999.786292 Date of Current Version : 06...... august 2002 Abstract An architecture for implementation of multivariable controllers is presented in this paper. The architecture is based on the Youla-Jabr-Bongiorno-Kucera parameterization of all stabilizing controllers. By using this architecture for implementation of multivariable controllers...
Ostwald, Michael J
Fractal analysis is a method for measuring, analysing and comparing the formal or geometric properties of complex objects. In this book it is used to investigate eighty-five buildings that have been designed by some of the twentieth-century’s most respected and celebrated architects. Including designs by Le Corbusier, Eileen Gray, Frank Lloyd Wright, Robert Venturi, Frank Gehry, Peter Eisenman, Richard Meier and Kazuyo Sejima amongst others, this book uses mathematics to analyse arguments and theories about some of the world’s most famous designs. Starting with 625 reconstructed architectural plans and elevations, and including more than 200 specially prepared views of famous buildings, this book presents the results of the largest mathematical study ever undertaken into architectural design and the largest single application of fractal analysis presented in any field. The data derived from this study is used to test three overarching hypotheses about social, stylistic and personal trends in design, along...
Katz, Richard; Wang, J. J.; Reed, R.; Kleyner, I.; DOrdine, M.; McCollum, J,; Cronquist, B.; Howard, J.
Architecture and process, combined, significantly affect the hardness of programmable technologies. The effects of high energy ions, ferroelectric memory architectures, and shallow trench isolation are investigated. A detailed single event latchup (SEL) study has been performed.
Barnes, George H. (Inventor); Lundstrom, Stephen F. (Inventor); Shafer, Philip E. (Inventor)
A high speed parallel array data processing architecture fashioned under a computational envelope approach includes a data base memory for secondary storage of programs and data, and a plurality of memory modules interconnected to a plurality of processing modules by a connection network of the Omega gender. Programs and data are fed from the data base memory to the plurality of memory modules and from hence the programs are fed through the connection network to the array of processors (one copy of each program for each processor). Execution of the programs occur with the processors operating normally quite independently of each other in a multiprocessing fashion. For data dependent operations and other suitable operations, all processors are instructed to finish one given task or program branch before all are instructed to proceed in parallel processing fashion on the next instruction. Even when functioning in the parallel processing mode however, the processors are not locked-step but execute their own copy of the program individually unless or until another overall processor array synchronization instruction is issued.
FitzGerald, Paul; Bennett, James; Carr, Jeffrey; Edic, Peter M; Entrikin, Daniel; Gao, Hewei; Iatrou, Maria; Jin, Yannan; Liu, Baodong; Wang, Ge; Wang, Jiao; Yin, Zhye; Yu, Hengyong; Zeng, Kai; De Man, Bruno
We are interested in exploring dedicated, high-performance cardiac CT systems optimized to provide the best tradeoff between system cost, image quality, and radiation dose. We sought to identify and evaluate a broad range of CT architectures that could provide an optimal, dedicated cardiac CT solution. We identified and evaluated thirty candidate architectures using consistent design choices. We defined specific evaluation metrics related to cost and performance. We then scored the candidates versus the defined metrics. Lastly, we applied a weighting system to combine scores for all metrics into a single overall score for each architecture. CT experts with backgrounds in cardiovascular radiology, x-ray physics, CT hardware and CT algorithms performed the scoring and weighting. We found nearly a twofold difference between the most and the least promising candidate architectures. Architectures employed by contemporary commercial diagnostic CT systems were among the highest-scoring candidates. We identified six architectures that show sufficient promise to merit further in-depth analysis and comparison. Our results suggest that contemporary diagnostic CT system architectures outperform most other candidates that we evaluated, but the results for a few alternatives were relatively close. We selected six representative high-scoring candidates for more detailed design and further comparative evaluation.
Rahimi, Fatemeh; Gøtze, John; Møller, Charles
Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...... architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....
Rahimi, Fatemeh; Gøtze, John; Møller, Charles
architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole.......Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...
Rahimov Laziz Abduazizovich
Full Text Available this report illustrates about Humayun architecture. Since Baburid style architecture has started in 1526 in India he had put so much effort to change to his own Baburid style which was adopted from Timurid Tradition. However Baburs sudden death did not allow him to develop as he has planned. Therefore his architecture style was not developed in India. Furthermore Humayun was inspired from Baburid architecture from what he has done during for four years although Humayun is sightseeing was very different compare to Babur. He has brought in architectural sphere extraordinary philosophy. He has ruled over India for some years during those years he has developed many new styles and he has put so much effort to change past architectural style. Unfortunately Afghans ruler Sher Shah has attacked India for the reason Humayun had to escape to Persia. The purpose of this report is to identify to which of this rulers belongs misconceptions of those buildings in India.
This paper focuses on the specific knowledge residing in architectural practice. It is based on the research of 35 PhD fellows in the ADAPT-r (Architecture, Design and Art Practice Training-research) project. The ADAPT-r project innovates architectural research in combining expertise from academia...... and from practice in order to highlight and extract the specific kind of knowledge which resides and is developed in architectural practice (creative practice research). The paper will discuss three ongoing and completed PhD projects and focusses on the outcomes and their contribution to the field....... Specific to these research projects is that the researcher is within academia but stays emerged in architectural practice. The projects contribute to a better understanding of architectural practice, how it develops and what kind of knowledge is crucial. Furthermore, the paper will develop a reflection...
Architecture and Art as Fuel New development zones for shopping and entertainment and space for festivals inside the city CAN be coupled with art and architecture and become ‘open minded' public domains based on cultural exchange and mutual learning. This type of space could be labelled...... as "experiencescape" - a space between tourism, culture, learning and economy. Strategies related to these challenges involve new architectural concepts and art as ‘engines' for a change. New expressive architecture and old industrial buildings are often combined into hybrid narratives, linking the past...... with the future. But this is not enough. The agenda is to develop architectural spaces, where social interaction and learning are enhanced by art and fun. How can we develop new architectural designs in our inner cities and waterfronts where eventscapes, learning labs and temporal use are merged with everyday...
Burmester, C.P.; Gronsky, R.; Wille, L.T.
In this paper algorithmic considerations regarding the implementation of various materials science applications of the Monte Carlo technique to single instruction multiple data (SIMD) computer architectures are presented. In particular, implementation of the Ising model with nearest, next nearest, and long range screened Coulomb interactions on the SIMD architecture MasPar MP-1 (DEC mpp-12000) series of massively parallel computers is demonstrated. Methods of code development which optimize processor array use and minimize inter-processor communication are presented including lattice partitioning and the use of processor array spanning tree structures for data reduction. Both geometric and algorithmic parallel approaches are utilized. Benchmarks in terms of Monte Carl updates per second for the MasPar architecture are presented and compared to values reported in the literature from comparable studies on other architectures
Gomez-Guillamon, Maria; Eskemose Andersen, Jørgen; Contreras, Jorge Lobos
Introduced by scientific articles conserning architecture and human rights in light of cultures, emergencies, social equality and sustainability, democracy, economy, artistic development and science into architecture. Concluding in definition of needs for new roles, processes and education of arc......, Architettura di Alghero in Italy, Architecture and Design of Kocaeli University in Turkey, University of Aguascalientes in Mexico, Architectura y Urbanismo of University of Chile and Escuela de Architectura of Universidad Austral in Chile....
We present an overview of the ATLAS analysis architecture including the relevant aspects of the computing model and the major architectural aspects of the Athena framework. Emphasis will be given to the interplay between the analysis use cases and the technical aspects of the architecture including the design of the event data model, transient-persistent separation, data reduction strategies, analysis tools, and ROOT interoperability
Feringa, Jelle; Søndergaard, Asbjørn
The 2011 edition of Fabricate inspired a number of collaborations, this article seeks to highlight three of these. There is a common thread amongst the projects presented: sharing the ambition to close the rift between design and fabrication while incorporating structural design aspects early on....... The development of fabrication techniques in the work presented is considered an inherent part of architectural design and shares the aspiration of developing approaches to manufacturing architecture that are scalable to architectural proportions1 and of practical relevance....
"What is prison architecture and how can it be studied? How are concepts such as humanism, dignity and solidarity translated into prison architecture? What kind of ideologies and ideas are expressed in various prison buildings from different eras and locations? What is the outside and the inside of a prison, and what is the significance of movement within the prison space? What does a lunch table have to do with prison architecture? How do prisoners experience materiality in serving a prison ...
In this document we present the preliminary architecture of the SUPERCLOUD data management and storage. We start by defining the design requirements of the architecture, motivated by use cases and then review the state-of-the-art. We survey security and dependability technologies and discuss designs for the overall unifying architecture for data management that serves as an umbrella for different security and dependability data management features. Specifically the document lays out the archi...
Mikkola, Juliana Hsuan
The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review...
Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...... and affective impacts, of these material remains. The contributions in this volume investigate the way time, performance and movement, both physically and emotionally, are central aspects of understanding architectural assemblages. It is a book about the constellations of people, places and things that emerge...
values and ethical stands involved in the export of Danish Architecture. Abstract: Danish architecture has, in a sense, been driven by an unwritten contract between the architects and the democratic state and its institutions. This contract may be viewed as an ethos – an architectural tradition......The article is a chapter in the catalogue for the Danish exhibition at the 2016 Architecture Biennale in Venice. The catalogue is conceived at an independent book exploring the theme Art of Many - The Right to Space. The chapter is an essay in this anthology tracing and discussing the different...
.... While the term "decentralization" is familiar from political and economic contexts, it has been applied extensively, if indiscriminately, to describe recent trends in software architecture towards...
Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL
help with this issue, which are a particular instances of the more general challenge of efficient host/guest IO that is the focus of interfaces like virtio. A collection of bridging technologies have been identified in Chapter 4, which can be helpful to overcome the limitations and challenges of supporting efficient storage for secure enclaves. The synthesis of native filesystem security mechanisms and bridging technologies led to an isolation-centric storage architecture that is proposed in Chapter 5, which leverages isolation mechanisms from different layers to facilitate secure storage for an enclave. Recommendations: The following highlights recommendations from the investigations done thus far. - The Lustre filesystem offers excellent performance but does not support some security related features, e.g., encryption, that are included in GPFS. If encryption is of paramount importance, then GPFS may be a more suitable choice. - There are several possible Lustre related enhancements that may provide functionality of use for secure-enclaves. However, since these features are not currently integrated, the use of Lustre as a secure storage system may require more direct involvement (support). (*The network that connects the storage subsystem and users, e.g., Lustre s LNET.) - The use of OpenStack with GPFS will be more streamlined than with Lustre, as there are available drivers for GPFS. - The Manilla project offers Filesystem as a Service for OpenStack and is worth further investigation. Manilla has some support for GPFS. - The proposed Lustre enhancement of Dynamic-LNET should be further investigated to provide more dynamic changes to the storage network which could be used to isolate hosts and their tenants. - The Linux namespaces offer a good solution for creating efficient restrictions to shared HPC filesystems. However, we still need to conduct a thorough round of storage/filesystem benchmarks. - Vendor products should be more closely reviewed, possibly to
Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 4. Syntheses, molecular and crystalline architectures, and luminescence behaviour of terephthalate bridged heptacoordinated dinuclear lead(II) complexes containing a pentadentate N-donor Schiff base. Subhasis Roy Somnath Choubey Sumitava Khan ...
Lago, Patricia; Avgeriou, Paris; Hilliard, Rich
As noted earlier, some stakeholder concerns are well-served today by available architecture viewpoints, frameworks, or ADLs, while others aren't expressible with available, off-the-shelf approaches. Hence the theme of this special issue: exploring the space of architecting in the face of multiple
This presentation discusses ‘landscape architectural design as scientific inquiry’ and exemplifies this with the description of a design process within climate-responsive design leading to new design knowledge. ‘Research and design’ are issues that need increasing attention within landscape
Xiang, Cheng; Ding, Shenqiang Q; Lee, Tong Heng
A geometrical interpretation of the multilayer perceptron (MLP) is suggested in this paper. Some general guidelines for selecting the architecture of the MLP, i.e., the number of the hidden neurons and the hidden layers, are proposed based upon this interpretation and the controversial issue of whether four-layered MLP is superior to the three-layered MLP is also carefully examined.
Zede Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2 (1966) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. The Department of Architecture. M Tedros. Abstract. No Abstract. Full Text:.
Full Text Available ‘Writing about music is like dancing about architecture – it’s a really stupid thing to want to do,’ is a statement usually attributed to Elvis Costello in Musician magazine No. 60 (October 1983, 52, which has long been quoted as evidence of the impossibility of writing adequately about the processes of producing and listening to music. Leaving aside the fact that Costello has denied he ever said it, and it has been mistakenly attributed to a number of other musicians over the years, including Laurie Anderson, David Byrne and Frank Zappa (who actually said ‘rock journalism is people who can't write, preparing stories based on interviews with people who can't talk, in order to amuse people who can't read’, this special journal issue sets out to prove the contrary. The papers in this special issue draw on evidence of the volume of important writing that exists about all forms of music, in academic, journalistic and creative fields, and discuss different ways in which music has been ‘translated’ into language. The English jazz writer Paul Savage, for example, describing the music of John Coltrane, refers to ‘a musical monument like that feat of terpsichorean architecture Giant Steps’. And in a 2004 issue of the Architectural Review (vol. 216, August entitled ‘Terpsichore and the Architects,’ Simon Goldhill notes that in ancient Greek theatre, ‘the chorus danced the architecture of the theatrical space into being’ and ‘the dancer was a storyteller whose body told a story, like a sculpture coming alive or a mobile embodiment of tradition.’ Choreographer Siobhan Davies speaks of the dancer building ‘an inner architecture with volume, texture and rhythm, which allows you to slice up space … Classical ballet and classical architecture share proportion, grandeur, and the idea of being at the centre of the universe … Light and acoustics are very important in dance and architecture: we have to consider how we introduce
Burnard, Lou; Dobreva, Milena; Fuhr, Norbert; Lüdeling, Anke
The seminar "Digital Historical Corpora" brought together scholars from (historical) linguistics, (historical) philology, computational linguistics and computer science who work with collections of historical texts. The issues that were discussed include digitization, corpus design, corpus architecture, annotation, search, and retrieval.
Full Text Available In scientific inquiry definitions serves the purpose of describing what something is in terms that are concise, precise and allows for clear communication. Since the start of the enterprise architecture (EA) research field the issue...
Mishchenko, Oleg; Raman, Sundaresan; Crawfis, Roger
An architecture for distributed and collaborative visualization is presented. The design goals of the system are to create a lightweight, easy to use and extensible framework for reasearch in scientific visualization. The system provides both single user and collaborative distributed environment. System architecture employs a client-server model. Visualization projects can be synchronously accessed and modified from different client machines. We present a set of visualization use cases that illustrate the flexibility of our system. The framework provides a rich set of reusable components for creating new applications. These components make heavy use of leading design patterns. All components are based on the functionality of a small set of interfaces. This allows new components to be integrated seamlessly with little to no effort. All user input and higher-level control functionality interface with proxy objects supporting a concrete implementation of these interfaces. These light-weight objects can be easily streamed across the web and even integrated with smart clients running on a user's cell phone. The back-end is supported by concrete implementations wherever needed (for instance for rendering). A middle-tier manages any communication and synchronization with the proxy objects. In addition to the data components, we have developed several first-class GUI components for visualization. These include a layer compositor editor, a programmable shader editor, a material editor and various drawable editors. These GUI components interact strictly with the interfaces. Access to the various entities in the system is provided by an AssetManager. The asset manager keeps track of all of the registered proxies and responds to queries on the overall system. This allows all user components to be populated automatically. Hence if a new component is added that supports the IMaterial interface, any instances of this can be used in the various GUI components that work with this
Hein, A. M.; Pak, M.; Putz, D.; Buhler, C.; Reiss, P.
A world ship is a concept for manned interstellar flight. It is a huge, self-contained and self-sustained interstellar vehicle. It travels at a fraction of a per cent of the speed of light and needs several centuries to reach its target star system. The well- known world ship concept by Alan Bond and Anthony Martin was intended to show its principal feasibility. However, several important issues haven't been addressed so far: the relationship between crew size and robustness of knowledge transfer, reliability, and alternative mission architectures. This paper addresses these gaps. Furthermore, it gives an update on target star system choice, and develops possible mission architectures. The derived conclusions are: a large population size leads to robust knowledge transfer and cultural adaptation. These processes can be improved by new technologies. World ship reliability depends on the availability of an automatic repair system, as in the case of the Daedalus probe. Star systems with habitable planets are probably farther away than systems with enough resources to construct space colonies. Therefore, missions to habitable planets have longer trip times and have a higher risk of mission failure. On the other hand, the risk of constructing colonies is higher than to establish an initial settlement on a habitable planet. Mission architectures with precursor probes have the potential to significantly reduce trip and colonization risk without being significantly more costly than architectures without. In summary world ships remain an interesting concept, although they require a space colony-based civilization within our own solar system before becoming feasible.
Gudkova, T. V.; Gudkov, A. A.
The development of a single spatial modernist conception had continued until the middle of the twentieth century. The first authors who proposed the new conceptual solutions of an architectural space that had the greatest impact on the further development of architecture were Le Corbusier, Frank Lloyd Wright, Mies van der Rohein. They embodied different approaches within the common modernist spatial concept using the language of morphological, symbolic and phenomenological descriptions of space. The concept was based on the simplification of functional links, integration of internal architectural space with the environment due to the vanishing of boundaries between them and expansion of their interrelation. Le Corbusier proposed a spatio-temporal concept based on the movement and tempo-rhythmics of the space “from inside to outside.” Frank Lloyd Wright proposed the concept of integral space where inner and outer spaces were the parts of a whole. Mies van der Rohein was the author of the universal space concept in which the idea of the “dissolution” of the inner space in the outer space was embodied.
Abel, Julianna; Luntz, Jonathan; Brei, Diann
Nature eloquently utilizes hierarchical structures to form the world around us. Applying the hierarchical architecture paradigm to smart materials can provide a basis for a new genre of actuators which produce complex actuation motions. One promising example of cellular architecture—active knits—provides complex three-dimensional distributed actuation motions with expanded operational performance through a hierarchically organized structure. The hierarchical structure arranges a single fiber of active material, such as shape memory alloys (SMAs), into a cellular network of interlacing adjacent loops according to a knitting grid. This paper defines a four-level hierarchical classification of knit structures: the basic knit loop, knit patterns, grid patterns, and restructured grids. Each level of the hierarchy provides increased architectural complexity, resulting in expanded kinematic actuation motions of active knits. The range of kinematic actuation motions are displayed through experimental examples of different SMA active knits. The results from this paper illustrate and classify the ways in which each level of the hierarchical knit architecture leverages the performance of the base smart material to generate unique actuation motions, providing necessary insight to best exploit this new actuation paradigm. (paper)
You, Shutang [University of Tennessee, Knoxville (UTK); Zhu, Dr. Lin [University of Tennessee (UT); Liu, Yong [ORNL; Liu, Yilu [ORNL; Shankar, Mallikarjun (Arjun) [ORNL; Robertson, Russell [Grid Protection Alliance; King Jr, Thomas J [ORNL
The operation and control of power grids will increasingly rely on data. A high-speed, reliable, flexible and secure data architecture is the prerequisite of the next-generation power grid. This paper summarizes the challenges in collecting and utilizing power grid data, and then provides reference data architecture for future power grids. Based on the data architecture deployment, related research on data architecture is reviewed and summarized in several categories including data measurement/actuation, data transmission, data service layer, data utilization, as well as two cross-cutting issues, interoperability and cyber security. Research gaps and future work are also presented.
Zdun, Uwe; Avgeriou, Paris
Architectural patterns are a fundamental aspect of the architecting process and subsequently the architectural documentation. Unfortunately, there is only poor support for modeling architectural patterns for two reasons. First, patterns describe recurring design solutions and hence do not directly
This book represents the first installment in a series based on the Herbert Baumer seminars hosted at the Knowlton School of Architecture at Ohio State University. These publications will focus on a single work by a particular architect and on special topics in contemporary architecture. The book opens with an interview with Thom Mayne, principal…
This text explores the concept of media architecture as a phenomenon of visual culture that describes the use of screen-technology in new spatial configurations in practices of architecture and art. I shall argue that this phenomenon is not necessarily a revolutionary new approach, but rather...
This paper will examine the current and near future trends for commercially available high-performance computers with architectures that differ from the mainstream ''supercomputer'' systems in use for the last few years. These emerging supercomputer architectures are just beginning to have an impact on the field of high performance computing. 7 refs., 1 tab.
This book presents contributions of drawing and text along with their many relationalities from ontology to history and vice versa in a range of reflections on architecture, drawing and topology. We hope to thereby indicate the potential of the theme in understanding not only the architecture...
Veneberg, R.K.M.; Iacob, Maria Eugenia; van Sinderen, Marten J.; Bodenstaff, L.; Reichert, M.U.; Rinderle-Ma, S.; Grossmann, G.
Combining enterprise architecture and operational data is complex (especially when considering the actual ‘matching’ of data with enterprise architecture objects), and little has been written on how to do this. Therefore, in this paper we aim to fill this gap and propose a method to combine
The network architecture of FTS2000 is graphically depicted. A map of network A topology is provided, with interservice nodes. Next, the four basic element of the architecture is laid out. Then, the FTS2000 time line is reproduced. A list of equipment supporting FTS2000 dedicated transmissions is given. Finally, access alternatives are shown.
Robert R. Hewitt
The literature review examines globalization and landscape architecture as discourse, samples its various meanings, and proposes methods to identify and contextualize its specific literature. Methodologically, the review surveys published articles and books by leading authors and within the WorldCat.org Database associated with landscape architecture and globalization, analyzing survey results for comprehensive concept...
Full Text Available The article observes intellectual and cultural level of architecture and its important functions in social process. Historical analysis shows constant decline of intellectual level of profession, as a reaction on radical changes in its social functions and mass scale, leading to degrading of individual critical reflection and growing dependence of architecture to political and economical bureaucracy.
The article observes intellectual and cultural level of architecture and its important functions in social process. Historical analysis shows constant decline of intellectual level of profession, as a reaction on radical changes in its social functions and mass scale, leading to degrading of individual critical reflection and growing dependence of architecture to political and economical bureaucracy.
their overlaps and collaboration. However, there are also challenging differences to take into account regarding disciplinary traditions of, for example, communication, temporality, and normativity. This article explores the potentials and challenges of architectural anthropology as a distinct sub...... architecture, but also in the contemporary urban environments in which most architects work....
Lee, S.; Hill, G.; Sauerbruch, M.; Hutton, L.; Knowles, R.; Bothwell, K.; Brennan, J.; Jauslin, D.; Holzheu, H.; AlSayyad, N.; Arboleda, G.; Bharne, V.; Røstvik, H.; Kuma, K.; Sunikka-Blank, M.; Glaser, M.; Pero, E.; Sjkonsberg, M.; Teuffel, P.; Mangone, G.; Finocchiaro, L.; Hestnes, A.; Briggs, D.; Frampton, K.; Lee, S.
The purpose of this book is to reveal, explore and further the debate on the aesthetic potentials of sustainable architecture and its practice. This book opens a new area of scholarship and discourse in the design and production of sustainable architecture, one that is based in aesthetics. The
Peder Pedersen, Claus
Presentation of the PhD research at the Aarhus School of Architecture and selected PhD projects in relation to PhD exhibition at Godsbanen.......Presentation of the PhD research at the Aarhus School of Architecture and selected PhD projects in relation to PhD exhibition at Godsbanen....
Marsh, Rob; Lauring, Michael
Traditional low-energy architecture has not necessarily led to reduced energy consumption. A paradigm shift is proposed promoting pluralistic energy-saving strategies.......Traditional low-energy architecture has not necessarily led to reduced energy consumption. A paradigm shift is proposed promoting pluralistic energy-saving strategies....
Barnes, Jeffrey M.
Many software systems eventually undergo changes to their basic architectural structure. Such changes may be prompted by new feature requests, new quality attribute requirements, changing technology, or other reasons. Whatever the causes, architecture evolution is commonplace in real-world software projects. Today's software architects, however,…
Reviews "Native American Architecture," by Nabokov and Easton, an encyclopedic work that examines technology, climate, social structure, economics, religion, and history in relation to house design and the "meaning" of space among tribes of nine regions. Describes this book's use in a college course on Native American architecture. (SV)
This dissertation addresses the problem of how logic programs can be made to execute at high speeds. Prolog, chosen as a representative logic programming language, differs from procedural languages in that it is applicative, nondeterminate and uses unification as its primary operation. Program performance is directly related to memory performance because high-speed processors are ultimately limited by memory bandwidth, and architectures that require less bandwidth have greater potential for high performance. This dissertation reports the dynamic data and instruction referencing characteristics of both sequential and parallel Prolog architectures and corresponding uniprocessor and multiprocessor memory-hierarchy performance tradeoffs. Initially, a family of canonical architectures, corresponding closely to Prolog, is defined from the principles of ideal machine architectures of Flynn, and is then refined into the realizable Warren Abstract Machine (WAM) architecture. The memory-referencing behavior of these architecture sis examined by tracing memory references during emulation of a set of Prolog benchmarks. Two-level memory hierarchies for both sequential (WAM) and parallel (PWAM) Prolog architectures are modeled. PWAM is the Restricted-AND Parallel architecture of Hermenegildo.
Voltolini, Francesca; El-Hakim, Sabry; Remondino, Fabio; Girardi, Stefano; Rizzi, Alessandro; Pontin, Marco; Gonzo, Lorenzo
The digital documentation of monuments and architectures is an important field of application of the 3D modeling where both visual quality and precise 3D measurement are important. This paper proposes an integrated approach based upon the combination of different 3D modeling techniques for the virtual reconstruction of complex architectures like those found in medieval castles. The need of combining multiple techniques, like terrestrial laser scanning, photogrammetry and digital surveying comes from the complexity of some structures and by the lack of a single technique capable of giving satisfactory results in all measuring conditions. This paper will address modeling issues related to the automation of photogrammetric methods and to the fusion of 3D models acquired with different techniques, at different point densities and measurement accuracies. The test bench is a medieval castle placed in Trentino A.A., a tiny region in Northern Italy.
... Information Publications Awards Partners Contact Us ¿Qué es Autismo? Donate Home What is Autism? What is Autism? ... Information Publications Awards Partners Contact Us ¿Qué es Autismo? Family Issues Home / Living with Autism / Family Issues ...
... Home / Care for Duchenne / Emotional Issues Print Email Emotional Issues Duchenne’s emotional toll on a child can manifest in a ... important things you can provide to ensure the emotional health of your child. Parents of a child ...
Octopus, a local computing network that has been evolving at the Lawrence Livermore National Laboratory for over fifteen years, is currently undergoing a major revision. The primary purpose of the revision is to consolidate and redefine the variety of conventions and formats, which have grown up over the years, into a single standard family of protocols, the Livermore Interactive Network Communication Standard (LINCS). This standard treats the entire network as a single distributed operating system such that access to a computing resource is obtained in a single way, whether that resource is local (on the same computer as the accessing process) or remote (on another computer). LINCS encompasses not only communication but also such issues as the relationship of customer to server processes and the structure, naming, and protection of resources. The discussion includes: an overview of the Livermore user community and computing hardware, the functions and structure of each of the seven layers of LINCS protocol, the reasons why we have designed our own protocols and why we are dissatisfied by the directions that current protocol standards are taking
Mikkola, Juliana Hsuan
and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...
The title of this article is adapted from Theodor W. Adorno's famous dictum: 'To write poetry after Auschwitz is barbaric.' After the catastrophic earthquake in Kocaeli, Turkey on the 17th of August 1999, in which more than 40,000 people died or were lost, Necdet Teymur, who was then the dean of the Faculty of Architecture of the Middle East Technical University, referred to Adorno in one of his 'earthquake poems' and asked: 'Is architecture possible after 17th of August?' The main objective of this article is to interpret Teymur's question in respect of its connection to Adorno's philosophy with a view to make a contribution to the politics and ethics of architecture in Turkey. Teymur's question helps in providing a new interpretation of a critical approach to architecture and architectural technology through Adorno's philosophy. The paper also presents a discussion of Adorno's dictum, which serves for a better understanding of its universality/particularity.
F.S. de Boer (Frank); M.M. Bonsangue (Marcello); L.P.J. Groenewegen; A. Stam; S. Stevens; L.W.N. van der Torre (Leon)
htmlabstractAn enterprise architecture is a high-level description intended to capture the vision of an enterprise integrating all its dimensions: organization structure, business processes, and infrastructure. Every single part of an enterprise is subject to change, and each change may have
Full Text Available Minimalism in architecture contains the idea of the minimum as a leading creative tend to be considered and interpreted in working through phenomena of empathy and abstraction. In the Western culture, the root of this idea is found in empathy of Wilhelm Worringer and abstraction of Kasimir Malevich. In his dissertation, 'Abstraction and Empathy' Worringer presented his thesis on the psychology of style through which he explained the two opposing basic forms: abstraction and empathy. His conclusion on empathy as a psychological basis of observation expression is significant due to the verbal congruence with contemporary minimalist expression. His intuition was enhenced furthermore by figure of Malevich. Abstraction, as an expression of inner unfettered inspiration, has played a crucial role in the development of modern art and architecture of the twentieth century. Abstraction, which is one of the basic methods of learning in psychology (separating relevant from irrelevant features, Carl Jung is used to discover ideas. Minimalism in architecture emphasizes the level of abstraction to which the individual functions are reduced. Different types of abstraction are present: in the form as well as function of the basic elements: walls and windows. The case study is an example of Sou Fujimoto who is unequivocal in its commitment to the autonomy of abstract conceptualization of architecture.
Avgeriou, Paris; Lago, Patricia; Kruchten, Philippe
The shift of the software architecture community towards architectural knowledge has brought along some promising research directions. In this workshop we discuss the issues that lead to the application of architectural knowledge in research and industrial practice; ongoing research and new ideas to
Mahdavinejad, Mohammadjavad; Dehghani, Sohaib; Shahsavari, Fatemeh
The interaction between technology and history is one of the most significant issues in achieving an efficient and progressive architecture in any era. This is a concept which stems from lesson of traditional architecture of Iran. Architecture as a part of art, has permanently been transforming just like a living organism. In fact, it has been…
Full Text Available The process of precarization is analysed in different manners in most literature concerning contemporary stakes of western welfare states. In comparison to other countries, Belgium has known a rather specific and delimited effect of the economic crisis from 2008, but certain groups face rather an ongoing effect of precarization on multiple and intertwined aspects. The aim of the article is to analyse the situation of precarity of single-parent families in the Brussels-Capital Region. The attention to that group is related to its higher risk of precarity and poverty. Furthermore it allows analysing the limits of public policies in the fight against poverty and precarity, that are clearly inadequate. Various options in terms of public policies and legal measures in the fight against poverty are discussed from three different angles of perspective: socioeconomic positions, social integration and the subjective experience (Dubet 1994. The tension between recognition and redistribution measures is central (Fraser 2011 in the argumentation for a balanced vision of policy measures to address single-parent poverty. La literatura científica sobre las apuestas contemporáneas de los estados de bienestar occidentales analiza de forma diferente el proceso de precarización. En comparación con otros países, Bélgica ha vivido desde 2008 un efecto de la crisis económica bastante específico y delimitado. Sin embargo, algunos grupos se enfrentan a un proceso de precarización continuo en numerosos aspectos, interrelacionados entre sí. El objetivo de este artículo es analizar la situación de precariedad de las familias monoparentales de la región de Bruselas capital. La atención a ese grupo está relacionada con su mayor riesgo de precariedad y pobreza. Además, permite analizar los límites de las políticas públicas en la lucha contra la pobreza y la precariedad, que son claramente insuficientes. Se analizan desde tres puntos de vista diversas
André B. J. Kokkeler
Full Text Available We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm2 in a 130 nm process, is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC via a network interface (NI. Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT and best effort (BE. For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool.
Full Text Available We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm2 in a 130 nm process, is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC via a network interface (NI. Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT and best effort (BE. For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool.
Drew, Nancy K; Johnsen, Nicholas E; Core, Jason Q; Grosberg, Anna
In a properly contracting cardiac muscle, many different subcellular structures are organized into an intricate architecture. While it has been observed that this organization is altered in pathological conditions, the relationship between length-scales and architecture has not been properly explored. In this work, we utilize a variety of architecture metrics to quantify organization and consistency of single structures over multiple scales, from subcellular to tissue scale as well as correlation of organization of multiple structures. Specifically, as the best way to characterize cardiac tissues, we chose the orientational and co-orientational order parameters (COOPs). Similarly, neonatal rat ventricular myocytes were selected for their consistent architectural behavior. The engineered cells and tissues were stained for four architectural structures: actin, tubulin, sarcomeric z-lines, and nuclei. We applied the orientational metrics to cardiac cells of various shapes, isotropic cardiac tissues, and anisotropic globally aligned tissues. With these novel tools, we discovered: (1) the relationship between cellular shape and consistency of self-assembly; (2) the length-scales at which unguided tissues self-organize; and (3) the correlation or lack thereof between organization of actin fibrils, sarcomeric z-lines, tubulin fibrils, and nuclei. All of these together elucidate some of the current mysteries in the relationship between force production and architecture, while raising more questions about the effect of guidance cues on self-assembly function. These types of metrics are the future of quantitative tissue engineering in cardiovascular biomechanics.
Kilpatrick, Tim; Gonzalez, Jesus; Chandia, Rodrigo; Papa, Mauricio; Shenoi, Sujeet
Supervisory control and data acquisition (SCADA) systems are widely used in industrial control and automation. Modern SCADA protocols often employ TCP/IP to transport sensor data and control signals. Meanwhile, corporate IT infrastructures are interconnecting with previously isolated SCADA networks. The use of TCP/IP as a carrier protocol and the interconnection of IT and SCADA networks raise serious security issues. This paper describes an architecture for SCADA network forensics. In addition to supporting forensic investigations of SCADA network incidents, the architecture incorporates mechanisms for monitoring process behavior, analyzing trends and optimizing plant performance.
Zwegers, Arian; Tølle, Martin; Vesterager, Johan
enterprises, for instance concerning integration issues. This chapter lays down an architectural framework, called VERAM, which aims to support the set up and operation of virtual enterprises. The framework aims to offer handles that contribute to solving the problems that enterprises face when they want...... to cooperate in a Virtual Enterprise. Supported by the framework, individual enterprises might operate and set up a virtual enterprise from a dynamic, inter-enterprise network. Furthermore, this chapter shows how other chapters of this book fit into the VERAM architectural framework....
This article deals with the development of museum architecture from the formation of the classic building architecture to the establishment of the contemporary museum architecture. Changes in the museum building architecture and displaying principles have been analysed. The 19th century was defined by the emergence of a vast number of museums serving through present as examples of the contemporary museum architecture. New styles are tried in the museum architecture alo...
National Aeronautics and Space Administration — Proposed is an architecture for large (>200 m2 surface area) photovoltaic (PV) arrays, deployable from compact stowage with one single, continuously smooth sweep...
.... The objective of this thesis is to design an intrusion detection system (IDS) architecture that permits administrators operating on MYSEA client machines to conveniently view and analyze IDS alerts from the single level networks...
Full Text Available of an architecture to support: interoperability between existing health information systems already in use in the country; incremental extension into a fully integrated national health information system without substantial reengineering; and scaling, from a single...
Muir, Dylan R
Recurrent neural network architectures can have useful computational properties, with complex temporal dynamics and input-sensitive attractor states. However, evaluation of recurrent dynamic architectures requires solving systems of differential equations, and the number of evaluations required to determine their response to a given input can vary with the input or can be indeterminate altogether in the case of oscillations or instability. In feedforward networks, by contrast, only a single pass through the network is needed to determine the response to a given input. Modern machine learning systems are designed to operate efficiently on feedforward architectures. We hypothesized that two-layer feedforward architectures with simple, deterministic dynamics could approximate the responses of single-layer recurrent network architectures. By identifying the fixed-point responses of a given recurrent network, we trained two-layer networks to directly approximate the fixed-point response to a given input. These feedforward networks then embodied useful computations, including competitive interactions, information transformations, and noise rejection. Our approach was able to find useful approximations to recurrent networks, which can then be evaluated in linear and deterministic time complexity.
National Aeronautics and Space Administration — The Avionics Architectures for Exploration Project team will develop a system level environment and architecture that will accommodate equipment from multiple...
Jones, William Henry
The Project Integration Architecture (PIA) is a distributed, object-oriented, conceptual, software framework for the generation, organization, publication, integration, and consumption of all information involved in any complex technological process in a manner that is intelligible to both computers and humans. In the development of PIA, it was recognized that in order to provide a single computational environment in which all information associated with any given complex technological process could be viewed, reviewed, manipulated, and shared, it is necessary to formulate all the elements of such a process on the most fundamental level. In this formulation, any such element is regarded as being composed of any or all of three parts: input information, some transformation of that input information, and some useful output information. Another fundamental principle of PIA is the assumption that no consumer of information, whether human or computer, can be assumed to have any useful foreknowledge of an element presented to it. Consequently, a PIA-compliant computing system is required to be ready to respond to any questions, posed by the consumer, concerning the nature of the proffered element. In colloquial terms, a PIA-compliant system must be prepared to provide all the information needed to place the element in context. To satisfy this requirement, PIA extends the previously established object-oriented- programming concept of self-revelation and applies it on a grand scale. To enable pervasive use of self-revelation, PIA exploits another previously established object-oriented-programming concept - that of semantic infusion through class derivation. By means of self-revelation and semantic infusion through class derivation, a consumer of information can inquire about the contents of all information entities (e.g., databases and software) and can interact appropriately with those entities. Other key features of PIA are listed.
Please note this is a Short Discount publication. This year's edition of Computer Architecture Technology Trends analyses the trends which are taking place in the architecture of computing systems today. Due to the sheer number of different applications to which computers are being applied, there seems no end to the different adoptions which proliferate. There are, however, some underlying trends which appear. Decision makers should be aware of these trends when specifying architectures, particularly for future applications. This report is fully revised and updated and provides insight in
WGSN reports from the Architectural Knitted Surfaces workshop recently held at ShenkarCollege of Engineering and Design, Tel Aviv, which offered a cutting-edge insight into interactive knitted surfaces. With the increasing role of smart textiles in architecture, the Architectural Knitted Surfaces...... workshop brought together architects and interior and textile designers to highlight recent developments in intelligent knitting. The five-day workshop was led by architects Ayelet Karmon and Mette Ramsgaard Thomsen, together with Amir Cang and Eyal Sheffer from the Knitting Laboratory, in collaboration...
This book presents contributions of drawing and text along with their many relationalities from ontology to history and vice versa in a range of reflections on architecture, drawing and topology. We hope to thereby indicate the potential of the theme in understanding not only the architecture...... of today, but – perhaps most importantly – also creating and producing architecture that is contemporaneous and reacts to the radical changes of the physical world which surrounds us in the increasingly artificial measures of new materialities and understandings thereof. The contributions range from...
He, Xiuyu; Yang, Xudong
As the market and business continues to expand; the traditional single monolithic architecture is facing more and more challenges. The development of cloud computing and container technology promote microservice architecture became more popular. While the low coupling, fine granularity, scalability, flexibility and independence of the microservice architecture bring convenience, the inherent complexity of the distributed system make the security of microservice architecture important and difficult. This paper aims to study the authentication and authorization of the end user under the microservice architecture. By comparing with the traditional measures and researching on existing technology, this paper put forward a set of authentication and authorization strategies suitable for microservice architecture, such as distributed session, SSO solutions, client-side JSON web token and JWT + API Gateway, and summarize the advantages and disadvantages of each method.
Chen, Wentao; Zhong, Xian; Jin, Depeng; Zeng, Lieguang
Ethernet is now expanding into the metro area networks. To address the fast recovery and load balance issues in Metro Ethernet, we propose a multiple self-protected spanning trees based architecture. A self-protected spanning tree can recover from the link failure without the help the other spanning trees, which is different from the spanning trees in all the previously advocated Multiple Spanning Tree Protocol (MSTP) based architectures. The Single Link Replace Mechanism (SLRM) is the essential of the proposed architecture. The SLRM transforms a self-protected spanning tree into another spanning tree by only replacing one link in the tree with another link out of the tree. The SLRM provides a recovery mechanism by replacing the failed link in the self-protected spanning tree with the normal link out of the tree, and makes a two-edge connected network survives any single link failure. It also provides an additional load balance mechanism by changing the topology of the spanning tree, which can not be implemented in the traditional MSTP-based architectures. The recovery and load balance mechanisms using the SLRM are detailed illustrated and evaluated using the sample networks. Simulation results demonstrate the effectiveness of the SLRM in achieving fast recovery and dynamic load balance.
Qadri, Muhammad Yasir
The saturation of design complexity and clock frequencies for single-core processors has resulted in the emergence of multicore architectures as an alternative design paradigm. Nowadays, multicore/multithreaded computing systems are not only a de-facto standard for high-end applications, they are also gaining popularity in the field of embedded computing. The start of the multicore era has altered the concepts relating to almost all of the areas of computer architecture design, including core design, memory management, thread scheduling, application support, inter-processor communication, debu
Prusinkiewicz, Przemyslaw; Erasmus, Yvette; Lane, Brendan; Harder, Lawrence D; Coen, Enrico
To understand the constraints on biological diversity, we analyzed how selection and development interact to control the evolution of inflorescences, the branching structures that bear flowers. We show that a single developmental model accounts for the restricted range of inflorescence types observed in nature and that this model is supported by molecular genetic studies. The model predicts associations between inflorescence architecture, climate, and life history, which we validated empirically. Paths, or evolutionary wormholes, link different architectures in a multidimensional fitness space, but the rate of evolution along these paths is constrained by genetic and environmental factors, which explains why some evolutionary transitions are rare between closely related plant taxa.
Harrison, Neil B.; Avgeriou, Paris
Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or
Johnson, Stuart E; Cebrowski, Arthur K
.... Indeed, designing a fleet architecture composed of large numbers of manned and unmanned systems, networked together, provides coherence between building the force and operating the force against both challenges...
...., object and web technologies). The objective of the Agility project is to develop an open agent grid architecture populated with scalable, deployable, industrial strength agent grid components, targeting the theme 'agents for the masses...
Skousbøll, Karin Merete
With the author's Scandinavian viewpoint the aim of this book has been an investigation into contemporary Greek architecture and at the same time providing an understanding for its essential characteristics based on the historic, cultural heritage of Hellas....
Pyant, William C., III
Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilian casualties. This thesis shows that the architecture design factors of damage mechanism, fusing, weapons weight, guidance, and propulsion are significant in enhancing weapon performance objectives, and would benefit from modularization. Additionally, this thesis constructs an algorithm that can be used to design a weapon set for a particular target class based on these modular components.
Thomsen, Bo Stjerne; Jensen, Ole B.
The paper explores how performative urban architecture can enhance community-making and public domain using socio-technical systems and digital technologies to constitute an urban reality. Digital medias developed for the web are now increasingly occupying the urban realm as a tool for navigating...... using sensor technologies opening up for new access considerations in architecture as well as the ability for a local environment to act as real-time sources of information and facilities. Starting from the NoRA pavilion for the 10th International Architecture Biennale in Venice the paper discusses...... couple relationships between architecture, humans and society. These performative relationships between digital and physical environments are seen as illustrative of the social production of space by performance and the creative production of identity. The paper reflects on the perspectives...
... UAVs or Organic Air Vehicles. The approach of this effort was to analyze fault management requirements of formation flight for fleets of UAVs, and develop a layered fault management architecture which demonstrates significant...
In DSP Architecture Design Essentials, authors Dejan Marković and Robert W. Brodersen cover a key subject for the successful realization of DSP algorithms for communications, multimedia, and healthcare applications. The book addresses the need for DSP architecture design that maps advanced DSP algorithms to hardware in the most power- and area-efficient way. The key feature of this text is a design methodology based on a high-level design model that leads to hardware implementation with minimum power and area. The methodology includes algorithm-level considerations such as automated word-length reduction and intrinsic data properties that can be leveraged to reduce hardware complexity. From a high-level data-flow graph model, an architecture exploration methodology based on linear programming is used to create an array of architectural solutions tailored to the underlying hardware technology. The book is supplemented with online material: bibliography, design examples, CAD tutorials and custom software.
Full Text Available The adaptation of the forms and phenomena of nature is not a recent concept. Observation of natural mechanisms has been a primary source of innovation since prehistoric ages, which can be perceived through the history of architecture. Currently, this idea is coming to the front again through sustainable architecture and adaptive design. Investigating natural innovations and the clear-outness of evolution during the 20th century led to the creation of a separate scientific discipline, Bionics. Architecture and Bionics are strongly related to each other, since the act of building is as old as the human civilization - moreover its first formal and structural source was obviously the surrounding environment. Present paper discusses the definition of Bionics and its connection with the architecture.
Foged, Isak Worre; Kirkegaard, Poul Henning
Recent years have seen an increasing variety of applications of adaptive architectural structures for improvement of structural performance by recognizing changes in their environments and loads, adapting to meet goals, and using past events to improve future performance or maintain serviceability....... The general scopes of this paper are to develop a new adaptive kinetic architectural structure, particularly a reconfigurable architectural structure which can transform body shape from planar geometries to hyper-surfaces using different control strategies, i.e. a transformation into more than one or two...... different shape alternatives. The adaptive structure is a proposal for a responsive building envelope which is an idea of a first level operational framework for present and future investigations towards performance based responsive architectures through a set of responsive typologies. A mock- up concept...
Garrett, Michael; Magnone, Lee; Aghazarian, Hrand; Baumgartner, Eric; Kennedy, Brett
An electronics architecture has been developed to enable the rapid construction and testing of prototypes of robotic systems. This architecture is designed to be a research vehicle of great stability, reliability, and versatility. A system according to this architecture can easily be reconfigured (including expanded or contracted) to satisfy a variety of needs with respect to input, output, processing of data, sensing, actuation, and power. The architecture affords a variety of expandable input/output options that enable ready integration of instruments, actuators, sensors, and other devices as independent modular units. The separation of different electrical functions onto independent circuit boards facilitates the development of corresponding simple and modular software interfaces. As a result, both hardware and software can be made to expand or contract in modular fashion while expending a minimum of time and effort.
Bergstra, J.A.; Klint, P.
Building large, heterogeneous, distributed software systems poses serious problems for the software engineer; achieving interoperability of software systems is still a major challenge. We describe an experiment in designing a generic software architecture for solving these problems. To get
Accommodating sensory disabilities in architectural design requires specific design considerations. These are different from the ones included by the existing design concept 'accessibility', which primarily accommodates physical disabilites. Hence a new design concept 'sensory accessbility......' is presented as a parallel and complementary concept to the existing one. Sensory accessiblity accommodates sensory disabilities and describes architectural design requirements needed to ensure access to to the sensory experiences and architectural quality of a given space. The article is based on research...... findings from the PhD thesis 'A House for the Senses' by the author, a study of architectural requirements in housing design implied by a sensory impairment. The empirical research project is based on qualitative interviews and 1:1 testing in existing housing with participants who were either blind, deaf...
This essay is published in the Festschrift to art historian Donald Preziosi on his 75th birthday in 2016 and delves into the exploration of architectural perception and semiotic experience. The argument is the following: Claire Farago and Donald Preziosi once pointed out how recent art museums...... the fragmentary process of groundbreaking encounters with this building. The text shows how an embodied and reflexive experience of its architectural interiors and dis-courses go beyond the simplistic symbolism one finds in mainstream interpretations of Libe-skind’s architecture as well as in certain discourses...... by Libeskind himself. In reality, his ext-ra-functional architecture in Berlin and his early presentations of it constitute a kaleidoscopic field of experience in which critical self-reflexion may occur....
Lauring, Michael; Marsh, Rob
Architecture and Energy. Strategies for a Changing Climate. By Michael Lauring and Rob Marsh INTENT AND PURPOSE. The paper aims to further integrated design of low energy buildings with high architectural quality. A precondition for qualified integrated design is a holistic approach...... and on the related architectural aspects: Building depths, spatial organization, daylight, natural ventilation and solar cells . In order to get a truer, well-focused perception of how to design sustainable buildings, one needs to know basically what is more and what is less important among all the energy......, and where the transition from an industrial to an information- or knowledge-based society is well-developed. The last three decades of the 20th century show many conscientious - both governmental and architectural - Danish attempts at creating buildings with lower heat consumption. The lower U...
Despite the exaggerated news of the untimely ′death of the detail′ by Greg Lynn, the architectural detail is now more lifelike and active than ever before. In this era of digital design and production technologies, new materials, parametrics, building information modeling (BIM), augmented realities and the nano–bio–information–computation consilience, the detail is now an increasingly vital force in architecture. Though such digitally designed and produced details are diminishing in size to t...
Abstract – This paper focuses on the possibility of (re)designing architecture virtually with the help of one of the most important representation tools: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in virtual environments. Photography can be utilized in the process of ‘constructing’ a new space --that we can call ‘narrative space’-- from an existing s...
Job titles like ""Technical Architect"" and ""Chief Architect"" nowadays abound in software industry, yet many people suspect that ""architecture"" is one of the most overused and least understood terms in professional software development. Gorton's book tries to resolve this dilemma. It concisely describes the essential elements of knowledge and key skills required to be a software architect. The explanations encompass the essentials of architecture thinking, practices, and supporting technologies. They range from a general understanding of structure and quality attributes through technical i
Whereas architects and construction specialists used to rely mainly on sketches and physical models as representations of their own cognitive design models, they rely now more and more on computer models. Parametric models, generative models, as-built models, building information models (BIM), and so forth, they are used daily by any practitioner in architectural design and construction. Although processes of abstraction and the actual architectural model-based reasoning itself of course rema...
This box set is dedicated to the Danish architect and photographer Rasmus Hjortshøj’s research on contemporary architecture and its various interpretations, in a visual journey from Japan through Denmark to the United States.......This box set is dedicated to the Danish architect and photographer Rasmus Hjortshøj’s research on contemporary architecture and its various interpretations, in a visual journey from Japan through Denmark to the United States....
Tind Kristensen, Eva; Friis Møller, Winnie; Rotne, Georg
Climate and Architecture analyserer klimaets rolle i arkitekturen. Intentionen med bogen er at pege på nogle af de mange muligheder for bygningers klimaregulering, som et mere detaljeret studie af de lokale klimatiske forhold og den stedlige byggeskik tilbyder.......Climate and Architecture analyserer klimaets rolle i arkitekturen. Intentionen med bogen er at pege på nogle af de mange muligheder for bygningers klimaregulering, som et mere detaljeret studie af de lokale klimatiske forhold og den stedlige byggeskik tilbyder....
Skousbøll, Karin Merete
With the author's Scandinavian viewpoint the aim of this book has been an investigation into contemporary Greek architecture and at the same time providing an understanding for its essential characteristics based on the historic, cultural heritage of Hellas.......With the author's Scandinavian viewpoint the aim of this book has been an investigation into contemporary Greek architecture and at the same time providing an understanding for its essential characteristics based on the historic, cultural heritage of Hellas....
Crowder, James A; Friess, Shelli A
The goal of this book is to establish the foundation, principles, theory, and concepts that are the backbone of real, autonomous Artificial Intelligence. Presented here are some basic human intelligence concepts framed for Artificial Intelligence systems. These include concepts like Metacognition and Metamemory, along with architectural constructs for Artificial Intelligence versions of human brain functions like the prefrontal cortex. Also presented are possible hardware and software architectures that lend themselves to learning, reasoning, and self-evolution
In this thesis, we investigate whether reusable architectural decision models can support Service-Oriented Architecture (SOA) design. In the current state of the art, architectural decisions are captured ad hoc and retrospectively on projects; this is a labor-intensive undertaking without immediate benefits. On the contrary, we investigate the role reusable architectural decision models can play during SOA design: We treat recurring architectural decisions as first-class method elements and p...
Bunde-Pedersen, Jonathan; Mogensen, Martin; Bardram, Jakob Eyvind
and early implementation of a systemcapable of adapting to its operating environment, choosingthe best fit combination of the client-server and peerto-peer architectures. The architecture creates a seamlessintegration between a centralized hybrid architecture and adecentralized architecture, relying on what...
Questions of Representations in Architecture is the first major Danish contribution to the current international discussion on architects' use of representations and the significance of visual media for architecture.......Questions of Representations in Architecture is the first major Danish contribution to the current international discussion on architects' use of representations and the significance of visual media for architecture....
Full Text Available Architects increasingly favour mapping as a means of documentation. Through maps, they question and define the boundaries of their architectural intervention, the premise being that if they can adequately delaminate and map the site's found conditions, they may achieve a more complex understanding of the said site.If maps can successfully represent sets of complex interactions in an effective manner, they also have an objectifying tendency and are often criticized for being tools of domination as well for their propensity to stabilize space-time. Further, architectural mapping is often associated with the possibility to index the 'designer's syntactical code', a possibility coupled with the idea that 'none of the notations take precedence over any other', so as to encourage 'more plural, open-ended "performances" of the project-in-time'.These positions involve if not a pure scientific objectivity, at least the assumption that one may somehow sidestep the projection of the author's intentionality. Bringing these issues to light, the paper explores whether mapping could address temporality with an assumed depth that would re-responsibilize the architect mapmaker while still remaining open to the users' multiple readings in time.Our contention is that rather than relying on rules, syntax and sequences of transformations, architects may approach mapping as a creative act that is open to different temporalities, involving both a willingness to listen and a readiness to act, allowing stories to emerge all the while stepping up as the narrator. Focusing on the phenomenological dimension of drawing and the epistemological bearings of mapping, the paper reveals some of the ways in which architects can question the relation between architecture and time through their graphic representation.
Full Text Available Context aware applications, which can adapt their behaviors to changing environments, are attracting more and more attention. To simplify the complexity of developing applications, context aware middleware, which introduces context awareness into the traditional middleware, is highlighted to provide a homogeneous interface involving generic context management solutions. This paper provides a survey of state-of-the-art context aware middleware architectures proposed during the period from 2009 through 2015. First, a preliminary background, such as the principles of context, context awareness, context modelling, and context reasoning, is provided for a comprehensive understanding of context aware middleware. On this basis, an overview of eleven carefully selected middleware architectures is presented and their main features explained. Then, thorough comparisons and analysis of the presented middleware architectures are performed based on technical parameters including architectural style, context abstraction, context reasoning, scalability, fault tolerance, interoperability, service discovery, storage, security & privacy, context awareness level, and cloud-based big data analytics. The analysis shows that there is actually no context aware middleware architecture that complies with all requirements. Finally, challenges are pointed out as open issues for future work.
A global transition towards a new energy architecture is under way, driven by countries' need to respond to the changing dynamics of economic growth, environmental sustainability and energy security. The World Economic Forum, in collaboration with Accenture, has created the New Energy Architecture Initiative to address and accelerate this transition. The Initiative supports the development of national strategies and policy frameworks as countries seek to achieve the combined goals of energy security and access, sustainability, and economic growth and development. The World Economic Forum has formed a partnership with the Ministry of Energy of Myanmar to help apply the Initiative's approach to this developing and resource-rich nation. The Asian Development Bank and the World Economic Forum's Project Adviser, Accenture, have collaborated with the Forum on this consultation process, and have been supported by relevant government, industry and civil society stakeholders. The consultation process aims to understand the nation's current energy architecture challenges and provide an overview of a path to a New Energy Architecture through a series of insights. These insights could form the basis for a long-term multistakeholder roadmap to build Myanmar's energy sector in a way that is secure and sustainable, and promotes economic growth as the country makes its democratic transition. While not all recommendations can be implemented in the near term, they do provide options for creating a prioritized roadmap for Myanmar's energy transition. This report is the culmination of a nine-month multistakeholder process investigating Myanmar's energy architecture. Over the course of many visits to the country, the team has conducted numerous interviews, multistakeholder workshops, and learning and data-gathering exercises to ensure a comprehensive range of information and views. The team has also engaged with a variety of stakeholders to better
Full Text Available Fast development of hardware in recent years leads to the high availability of simple sensing devices at minimal cost. As a consequence, there is many of sensor networks nowadays. These networks can continuously produce a large amount of observed data including the location of measurement. Optimal data architecture for such propose is a challenging issue due to its large scale and spatio-temporal nature. The aim of this paper is to describe data architecture that was used in a particular solution for storage of sensor data. This solution is based on relation data model – concretely PostgreSQL and PostGIS. We will mention out experience from real world projects focused on car monitoring and project targeted on agriculture sensor networks. We will also shortly demonstrate the possibilities of client side API and the potential of other open source libraries that can be used for cartographic visualization (e.g. GeoServer. The main objective is to describe the strength and weakness of usage of relation database system for such propose and to introduce also alternative approaches based on NoSQL concept.
Al-Haj Hassan, Osama Mohammad; Ramaswamy, Lakshmish; Hamad, Fadi; Abu Taleb, Anas
Since the advent of Web 2.0, personalised applications such as mashups have become widely popular. Mashups enable end-users to fetch data from distributed data sources, and refine it based on their personal needs. This high degree of personalisation that mashups offer comes at the expense of performance and scalability. These scalability challenges are exacerbated by the centralised architectures of current mashup platforms. In this paper, we address the performance and scalability issues by designing CoMaP - a distributed mashup platform. CoMaP's architecture comprises of several cooperative mashup processing nodes distributed over the Internet upon which mashups can, fully or partially, be executed. CoMaP incorporates a dynamic and efficient scheme for deploying mashups on the processing nodes. Our scheme considers a number of parameters such as variations in link delays and bandwidths, and loads on mashup processing nodes. CoMaP includes effective and low-cost mechanisms for balancing loads on the processing nodes as well for handling node failures. Furthermore, we propose novel techniques that leverage keyword synonyms, ontologies and caching to enhance end-user experience. This paper reports several experiments to comprehensively study CoMaP's performance. The results demonstrate CoMaP's benefits as a scalable distributed mashup platform.
Rationalization and construction-aware design dominate the issue of realizability of freeform architecture. The former means the decomposition of an intended shape into parts which are sufficiently simple and efficient to manufacture; the latter refers to a design procedure which already incorporates rationalization. Recent contributions to this topic have been concerned mostly with small-scale parts, for instance with planar faces of meshes. The present paper deals with another important aspect, namely long-range parts and supporting structures. It turns out that from the pure geometry viewpoint this means studying families of curves which cover surfaces in certain well-defined ways. Depending on the application one has in mind, different combinatorial arrangements of curves are required. We here restrict ourselves to so-called hexagonal webs which correspond to a triangular or tri-hex decomposition of a surface. The individual curve may have certain special properties, like being planar, being a geodesic, or being part of a circle. Each of these properties is motivated by manufacturability considerations and imposes constraints on the shape of the surface. We investigate the available degrees of freedom, show numerical methods of optimization, and demonstrate the effectivity of our approach and the variability of construction solutions derived from webs by means of actual architectural designs.
Slot, Raymond; Steenbergen, van, Marlies; Plessius, Henk
Enterprise Architecture has been developed in order to optimize the alignment between business needs and the (rapidly changing) possibilities of information technology. But do organizations indeed benefit from the application of Enterprise Architecture according to those who are in any way involved in architecture? To answer this question, a model has been developed (the Enterprise Architecture Value Framework) to organize the benefits of Enterprise Architecture. Based on this model, a survey...
Schnepf, Andrea; Javaux, Mathieu; Vanderborght, Jan
Plant roots play an important role in several soil processes (Gregory 2006). Root architecture development determines the sites in soil where roots provide input of carbon and energy and take up water and solutes. However, root architecture is difficult to determine experimentally when grown in opaque soil. Thus, root architectural models have been widely used and been further developed into functional-structural models that are able to simulate the fate of water and solutes in the soil-root system (Dunbabin et al. 2013). Still, a systematic comparison of the different root architectural models is missing. In this work, we focus on discrete root architecture models where roots are described by connected line segments. These models differ (a) in their model concepts, such as the description of distance between branches based on a prescribed distance (inter-nodal distance) or based on a prescribed time interval. Furthermore, these models differ (b) in the implementation of the same concept, such as the time step size, the spatial discretization along the root axes or the way stochasticity of parameters such as root growth direction, growth rate, branch spacing, branching angles are treated. Based on the example of two such different root models, the root growth module of R-SWMS and RootBox, we show the impact of these differences on simulated root architecture and aggregated information computed from this detailed simulation results, taking into account the stochastic nature of those models. References Dunbabin, V.M., Postma, J.A., Schnepf, A., Pagès, L., Javaux, M., Wu, L., Leitner, D., Chen, Y.L., Rengel, Z., Diggle, A.J. Modelling root-soil interactions using three-dimensional models of root growth, architecture and function (2013) Plant and Soil, 372 (1-2), pp. 93 - 124. Gregory (2006) Roots, rhizosphere and soil: the route to a better understanding of soil science? European Journal of Soil Science 57: 2-12.
Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 7. Know Your Personal Computer - The CPU Base-Architecture. Siddhartha Kumar Ghoshal. Series Article Volume 1 Issue 7 July 1996 pp 15-22. Fulltext. Click here to view fulltext PDF. Permanent link:
Home; Journals; Resonance – Journal of Science Education; Volume 9; Issue 10. Learning Earthquake Design and Construction – 6. How Architectural Features Affect Building During Earthquakes? C V R Murty. Classroom Volume 9 Issue 10 October 2004 pp 82-85 ...
Home; Journals; Journal of Genetics; Volume 84; Issue 3. Towards a genetic architecture of cryptic genetic variation and genetic assimilation: the contribution of K. G. Bateman. Ian Dworkin. Commentary on J. Genet. Classic Volume 84 Issue 3 December 2005 pp 223-226 ...
Dijkman, Remco; Vanderfeesten, Irene; Reijers, Hajo A.
With the uptake of business process modelling in practice, the demand grows for guidelines that lead to consistent and integrated collections of process models. The notion of a business process architecture has been explicitly proposed to address this. This paper provides an overview of the prevailing approaches to design a business process architecture. Furthermore, it includes evaluations of the usability and use of the identified approaches. Finally, it presents a framework for business process architecture design that can be used to develop a concrete architecture. The use and usability were evaluated in two ways. First, a survey was conducted among 39 practitioners, in which the opinion of the practitioners on the use and usefulness of the approaches was evaluated. Second, four case studies were conducted, in which process architectures from practice were analysed to determine the approaches or elements of approaches that were used in their design. Both evaluations showed that practitioners have a preference for using approaches that are based on reference models and approaches that are based on the identification of business functions or business objects. At the same time, the evaluations showed that practitioners use these approaches in combination, rather than selecting a single approach.
Holmes, V.P.; Linebarger, J.M.; Miller, D.J.; Vandewart, R.L.
The Simdarion Infranet (S1) is a term which is being used to dcscribc one element of a multidisciplinary distributed and distance computing initiative known as DisCom2 at Sandia National Laboratory (http ct al. 1998). The Simulation Intranet is an architecture for satisfying Sandia's long term goal of providing an end- to-end set of scrviccs for high fidelity full physics simu- lations in a high performance, distributed, and distance computing environment. The Intranet Architecture group was formed to apply current distributed object technologies to this problcm. For the hardware architec- tures and software models involved with the current simulation process, a CORBA-based architecture is best suited to meet Sandia's needs. This paper presents the initial desi-a and implementation of this Intranct based on a three-tier Network Computing Architecture(NCA). The major parts of the architecture include: the Web Cli- ent, the Business Objects, and Data Persistence.
Robert R. Hewitt
Full Text Available The literature review examines globalization and landscape architecture as discourse, samples its various meanings, and proposes methods to identify and contextualize its specific literature. Methodologically, the review surveys published articles and books by leading authors and within the WorldCat.org Database associated with landscape architecture and globalization, analyzing survey results for comprehensive conceptual and co-relational frameworks. Three “higher order” dimensions frame the review’s conceptual organization, facilitating the organization of subordinate/subtopical areas of interest useful for comparative analysis. Comparative analysis of the literature suggests an uneven clustering of discipline-related subject matter across the literature’s “higher order” dimensions, with a much smaller body of literature related to landscape architecture confined primarily to topics associated with the dispersion of global phenomena. A subcomponent of this smaller body of literature is associated with other fields of study, but inferentially related to landscape architecture. The review offers separate references and bibliographies for globalization literature in general and globalization and landscape architecture literature, specifically.
Andreeva-Andrievskaya, L.N.; Kagramanyan, V.S.; Usanov, V.I.; )
The study Global Architecture of Innovative Nuclear Energy Systems Based on Thermal and Fast Reactors including a Closed Fuel Cycle (GAINS), aimed at harmonization of tools used to assess various options for innovative development of nuclear energy, modeling of jointly defined scenarios and analysis of obtained results is presented in the paper. Objectives and methods of the study, issues of spent fuel and fissile materials management are discussed. Investment risks and economic indicators are also described [ru
Full Text Available This inaugural issue of Footprint aims at understanding today’s architecture culture as a negotiation between two antithetical definitions of architecture’s identity. The belief in the disciplinary singularity of architectural objects, irreducible to the conditions of their production, is confronted - in discourse and design - with the perception of architecture as an interdisciplinary mediation between multiple political, economic, social, technological and cultural factors. With the concept of trans-disciplinarity, the negotiation between these two positions is investigated here as an engine of the ‘tradition of the present’ of contemporary architecture - the discourses and designs which emerged in the 1960s and defined orientation points for today’s architectural thought and practice.
Full Text Available This inaugural issue of Footprint aims at understanding today’s architecture culture as a negotiation between two antithetical definitions of architecture’s identity. The belief in the disciplinary singularity of architectural objects, irreducible to the conditions of their production, is confronted – in discourse and design – with the perception of architecture as an interdisciplinary mediation between multiple political, economic, social, technological and cultural factors. With the concept of trans-disciplinarity, the negotiation between these two positions is investigated here as an engine of the ‘tradition of the present’ of contemporary architecture – the discourses and designs which emerged in the 1960s and defined orientation points for today’s architectural thought and practice.
This volulme features eight original papers dedicated to the theme “Persian Architecture and Mathematics,” guest edited by Reza Sarhangi. All papers were approved through a rigorous process of blind peer review and edited by an interdisciplinary scientific editorial committee. Topics range from symmetry in ancient Persian architecture to the elaborate geometric patterns and complex three-dimensional structures of standing monuments of historical periods, from the expression of mathematical ideas to architectonic structures, and from decorative ornament to the representation of modern group theory and quasi-crystalline patterns. The articles discuss unique monuments Persia, including domed structures and two-dimensional patterns, which have received significant scholarly attention in recent years. This book is a unique contribution to studies of Persian architecture in relation to mathematics.
the number of museums went up from 300 by 1980 to estimated 3000 museums by 2015. In urban discourses, new museums and buildings for art have been considered as drivers for ´cultural sustainability´ of cities. The notion is diffuse and the reality is more an economic centred ´city branding´ to help...... the promotion of tourism. What surprises: in many cities, the buildings for art are better known and more published and discussed than the art they accommodate. A lot of them are considered as art objects. This raises two questions: How much is architecture itself a form of arts? (in Western architecture...... historically considered even the mother of all arts) - but more relevant: what are appropriate architectural spaces for presenting, exhibiting, contemplating, reflecting, meditating, discussing, enjoying, dissenting, debating creations of art. Simplified, this is a question about the relation between package...
Wenzel, Henrik; Alting, Leo
An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention......-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental Engineering, thus, in essence...... comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual disciplines, within each...
Full Text Available Procedural modeling has proven to be a very valuable tool in the ﬁeld of architecture. In the last few years, research has soared to automatically create procedural models from images. However, current algorithms for this process of inverse procedural modeling rely on the assumption that the building style is known. So far, the determination of the building style has remained a manual task. In this paper, we propose an algorithm which automates this process through classiﬁcation of architectural styles from facade images. Our classiﬁer ﬁrst identiﬁes the images containing buildings, then separates individual facades within an image and determines the building style. This information could then be used to initialize the building reconstruction process. We have trained our classiﬁer to distinguish between several distinct architectural styles, namely Flemish Renaissance, Haussmannian and Neoclassical. Finally, we demonstrate our approach on various street-side images.
Mohammed Mahbubur Rahman
Full Text Available The arch, an essential architectural element since the early civilizations, permitted the construction of lighter walls and vaults, often covering a large span. Visually it was an important decorative feature that was trans-mitted from architectural decoration to other forms of art worldwide. In early Islamic period, Muslims were receiving from many civilizations, which they improved and re-introduced to bring about the Renaissance. Arches appeared in Mesopotamia, Indus, Egyptian, Babylonian, Greek and Assyrian civilizations; but the Romans applied the technique to a wide range of structures. The Muslims mastered the use and design of the arch, employed for structural and functional purposes, progressively meeting decorative and symbolic pur-poses. Islamic architecture is characterized by arches employed in all types of buildings; most common uses being in arcades. This paper discusses the process of assimilation and charts how they contributed to other civilizations.
Wenzel, Henrik; Alting, Leo
of Eco-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental......An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention...... Engineering, thus, in essence comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual...
Sørensen, Nils Lykke; Frandsen, Anne Kathrine; Øien, Turid Borgestrand
on architecturalcompetitions, a series of interviews was conducted with building clients as well as architects, focusing on the impact of the above-mentioned changes within the building sector on architectural competitions as an institution. In the interviews, ICT and notleast BIM was a recurring theme that both parties saw...... as having a positive impact on competitions. But when looking closely into the answers, these revealed diverse understandings of how and why the impact of BIM on competitions could be said to be positive. The paper sheds light on the interaction between the actors (building clients, architects and client...... consultants) and the applied technologies (competition forms, ICT tools, directives) in architectural competitions in a theoretical actor-network perspective. The diverging understandings of the role of BIM are demonstrating one of many negotiations in progress in the network of architectural competitions...
The purpose of this document, as presented in Volume 1, The Foundations, is to assist the Department of Energy (DOE) in developing and promulgating information architecture guidance. This guidance is aimed at increasing the development of information architecture as a Departmentwide management best practice. This document describes departmental information architecture principles and minimum design characteristics for systems and infrastructures within the DOE Information Architecture Conceptual Model, and establishes a Departmentwide standards-based architecture program. The publication of this document fulfills the commitment to address guiding principles, promote standard architectural practices, and provide technical guidance. This document guides the transition from the baseline or defacto Departmental architecture through approved information management program plans and budgets to the future vision architecture. This document also represents another major step toward establishing a well-organized, logical foundation for the DOE information architecture.
As the world becomes more globalized, modern cities are becoming more and more indistinguishable. All too often the identity of the modern city turns its back on the cultural built environment of the past. Sustainable architecture and design are rapidly addressing many of the key issues around...... climate change and energy shortages, but it also has the ability to mediate between the existing cultural heritage and the future built environment. Ensuring that the architecture of tomorrow represents the culture embodied in our cities. Sustainable architecture can contribute to solving these issues...... as it has the potential to bridge between the practical and the symbolic elements of the city. It negotiates the relationships between humans and the physical world both manmade and natural. The role of culture is established in many theories of sustainable architecture and is significant in ensuring...
that goes beyond the narrow understanding of a linear progression and development of an abstract idea into its concretisation in well-defined phases. On a more specific level, it also calls for understandings of architectural agency that transcends perceptions of a practice confined to the studio...... or the office. The paper consists of investigations into such a stance. It is based on empiric studies, readings in architectural theory and applied actor-network theory. Furthermore the paper draws on recent examples of teaching practices pursuing this theme at the Royal Academy of Fine Arts, School...
Information architecture has changed dramatically since the mid-1990s and earlier conceptions of the world and the internet being different and separate have given way to a much more complex scenario in the present day. In the post-digital world that we now inhabit the digital and the physical blend easily and our activities and usage of information takes place through multiple contexts and via multiple devices and unstable, emergent choreographies. Information architecture now is steadily growing into a channel- or medium-specific multi-disciplinary framework, with contributions coming from a
Tambo, Torben; Filtenborg, Jacob
IT service providers tend to view their services as quasi-embedded in the client organisations infrastructure. Therefore, IT service providers lack a full picture of being an organisation with its own enterprise archicture. By systematically developing an enterprise architecture using the unifica......IT service providers tend to view their services as quasi-embedded in the client organisations infrastructure. Therefore, IT service providers lack a full picture of being an organisation with its own enterprise archicture. By systematically developing an enterprise architecture using...
American School & University, 2000
Presents photographs and basic information on architectural design, costs, square footage, and principle designers of the award winning school landscaping projects that competed in the American School & University Architectural Portfolio 2000. (GR)
Zhang, Jianghan; Che, Shengbing
Smart phones are mainly running Android, IOS and Windows Phone three mobile platform operating systems. The android smart phone has the best market shares and its processor chips are almost ARM software architecture. The chips memory address mapping mechanism of ARM software architecture is different with x86 software architecture. To forensics to android mart phone, we need to understand three key technologies: memory data acquisition, the conversion mechanism from virtual address to the physical address, and find the system’s key data. This article presents a viable solution which does not rely on the operating system API for a complete solution to these three issues.
Coarse-grained reconfigurable architecture (CGRA) has emerged as a solution for flexible, application-specific optimization of embedded systems. Helping you understand the issues involved in designing and constructing embedded systems, Design of Low-Power Coarse-Grained Reconfigurable Architectures offers new frameworks for optimizing the architecture of components in embedded systems in order to decrease area and save power. Real application benchmarks and gate-level simulations substantiate these frameworks.The first half of the book explains how to reduce power in the configuration cache. T
Programming multiprocessor architectures is a critical research issue. An overview is given of the various approaches to programming these architectures that are currently being explored. It is argued that two of these approaches, interactive programming environments and functional parallel languages, are particularly attractive since they remove much of the burden of exploiting parallel architectures from the user. Also described is recent work by the author in the design of parallel languages. Research on languages for both shared and nonshared memory multiprocessors is described, as well as the relations of this work to other current language research projects.
Chen, Minjie; Perreault, David J.; Afridi, Khurram
Electrolytic capacitors are often used for energy buffering applications, including buffering between single-phase ac and dc. While these capacitors have high energy density compared to film and ceramic capacitors, their life is limited. This paper presents a stacked switched capacitor (SSC) energy buffer architecture and some of its topological embodiments, which when used with longer life film capacitors overcome this limitation while achieving effective energy densities comparable to elect...
Zwegers, Arian; Hannus, Matti; Tølle, Martin
Nowadays, enterprises cooperate more extensively with other enterprises during the entire product life cycle. Temporary alliances between various enterprises emerge such as those in Virtual Enterprises. However, many enterprises experience difficulties in the formation and operation of virtual en...
The Virtual Ship concept calls for simulation models of systems to be brought together to create a virtual representation of a warship, in a process analogous to the construction of a physical ship...
This document describes a set of candidate alternatives proposed to accomplish the Hanford Cleanup system functions defined in a previous work. Development of alternatives is part of a sequence of system engineering activities which lead to definition of all the products which, when completed, accomplish the cleanup mission. The alternative set is developed to functional level four or higher depending on need
Full Text Available A wireless endoscopy capsule represents an efficient device interesting on the examination of digestive diseases. Many performance criteria’s (silicon area, dissipated power, image quality, computational time, etc. need to be deeply studied.In this paper, our interest is the optimization of the indicated criteria. The proposed methodology is based on exploring the advantages of the DCT/DWT transforms by combining them into single architecture. For arithmetic operations, the MCLA technique is used. This architecture integrates also a CABAC entropy coder that supports all binarization schemes. AMBA/I2C architecture is developed for assuring optimized communication.The comparisons of the proposed architecture with the most popular methods explained in related works show efficient results in terms dissipated power, hardware cost, and computation speed. Keywords: Wireless endoscopy capsule, DCT/DWT image compression, CABAC entropy coder, AMBA/I2C multi-bus architecture
Poikela, T; Plosila, J; Westerlund, T; Buytaert, J; Campbell, M; Gaspari, M De; Llopart, X; Wyllie, K; Gromov, V; Kluit, R; Beuzekom, M van; Zappon, F; Zivkovic, V; Brezina, C; Desch, K; Fu, Y; Kruth, A
In this paper, two digital column architectures suitable for sparse readout of data from a pixel matrix in trigger-less applications are presented. Each architecture reads out a pixel matrix of 256 x 256 pixels with a pixel pitch of 55 μm. The first architecture has been implemented in the Timepix3 chip, and this is presented together with initial measurements. Simulation results and measured data are compared. The second architecture has been designed for Velopix, a readout chip planned for the LHCb VELO upgrade. Unlike Timepix3, this has to be tolerant to radiation-induced single-event effects. Results from post-layout simulations are shown with the circuit architectures
This book presents three projects that demonstrate the fundamental problems of architectural design and urban composition – the layout design, evaluation and optimization. Part I describes the functional layout design of a residential building, and an evaluation of the quality of a town square (plaza). The algorithm for the functional layout design is based on backtracking using a constraint satisfaction approach combined with coarse grid discretization. The algorithm for the town square evaluation is based on geometrical properties derived directly from its plan. Part II introduces a crowd-simulation application for the analysis of escape routes on floor plans, and optimization of a floor plan for smooth crowd flow. The algorithms presented employ agent-based modeling and cellular automata.
Architectural and cultural guidebook for Jordan that also includes a view on the Syrian refugee situation, especially in the large UNHCR camp of Zaatari. The guide book is a preparatory study for a field trip our master studio undertook to the Hashemite Kingdom of Jordan in Fall 2016....
Avgeriou, Paris; Guelfi, Nicolas; Perrouin, Gilles
One of the possible scenarios in a system evolution cycle, is to translate an emergent set of new requirements into software architecture design and subsequently to update the system implementation. In this paper, we argue that this form of forward engineering, even though addresses the new system
Bidraget "Architectural Creation of Light" indgår sammen med 108 andre bidrag i bogen "You Say Light, I Think Shadow". Bogens indhold undersøger: "Hvad er lys". I dette bidrag besvares spørgsmålet gennem iagttagelser af arkitektstuderendes undersøgelser af lyset i deres arbejdsmodeller i...
Andersen, Peter; Carugati, Andrea
By being holistically preoccupied with coherency among organizational elements such as organizational strategy, business needs and the IT functions role in supporting the business, enterprise architecture (EA) has grown to become a core competitive advantage. Though EA is a maturing research area...
Past and current specification techniques use timing diagrams and written text to describe the phenomenology of an interface. This paper treats an interface as the architecture of a number of processes, which are dispersed over the related system parts and the message path. This approach yields a
Developing and designing new product architecture for electrical starters. Questing what system can handle high variety both today and tomorrow's variety. Methods found in literature are applied. In this thesis technology platform is chosen and developed to prototype stage. Software for handling product structure and documentation developed. Solutions to handle generational variations are suggested.
The article presents two contemporary projects of paper structures relief architecture designed and built by Shigeru Ban Architects and Voluntary Architect Network. Author of the article took part in design and construction process of one of the projects. The project of Yaan Nursery School, which
that employing the visualising methods of the recent development of Actor-Network-Theory called ‘Cartography of Controversies' might contribute to trans-disciplinary efforts to develop analytic understanding of the conflicting human purposes and power-struggles at stake in the be-coming of architecture....
Stang Våland, Marianne
This paper contributes to our sparse knowledge on the relationship between organisational and architectural design. It is based on an ethnographic study of the process of designing a municipality town hall, in which end-user participation constituted an integrated part of the design process...
have developed a computer architecture that reduces the high cost of a context switch and provides hardware-based computer security. A context switch...code to jump to a computer virus or other malware application. Caller ID does not have any authentication. A prank caller can easily spoof Caller ID...
Wessing, Henrik; Bozorgebrahimi, Kurosh; Belter, Bartosz
This study identifies key requirements for NRENs towards future network architectures that become apparent as users become more mobile and have increased expectations in terms of availability of data. In addition, cost saving requirements call for federated use of, in particular, the optical...
By Michael Tedros, M. Arch., Partner, Enav & Tedros Architects & Town Planners. In October 1962, a committee was set up by the Haile Selassie I University to study the pos- sibilities of setting up a Department of Architecture within the College of ... useful role in the development of modern architec- ture in Ethiopia. 37 ...
Deibel, S R; Greenes, R A
This article focuses on the software requirements for enterprise integration in radiology. The needs of a future radiology systems architecture are examined, both at a concrete functional level and at an abstract system-properties level. A component-based approach to software development is described and is validated in the context of each of the abstract system requirements for future radiology computing environments.
The Department of Urbanism at the Faculty of Architecture and Built Environment, TU Delft considers urbanism as a planning and design oriented activity towards urban and rural landscapes. It aims to enhance, restore or create landscapes from a perspective of sustainable development, so as to guide,
on the visual materials and documents produced during the process, and interviews with architects, clients and engineers, I describe the continuous efforts to establish and strengthen architectural motives, and how they eventually gain the ability to align other motives and other actors. I suggest...
Zdun, Uwe; Avgeriou, Paris
Despite the general acceptance of software architecture as a pivotal player in software engineering, software evolution techniques have been traditionally concentrated on the code level. The state-of-the-practice is comprised of refactoring and re-engineering techniques that focus on code artefacts.
Oriented Architecture to facilitate function encapsulation, functional expertise delegation, flexibility and composability for multiple customer use...7Distribution A: Approved for public release; distribution is unlimited Customers • RDECOM (RDEC’s) – Aviation and Missile Research, Development and...Configuration & Static Analysis Tool ( CSAT ) Military Scenario Development Environment (MSDE) Military Scenario Definition Language (MSDL) Scenario File
Shaw, Neil; Talaske, Rick; Bistafa, Sylvio
This tutorial is intended to provide an overview of current knowledge and practice in architectural acoustics. Topics covered will include basic concepts and history, acoustics of small rooms (small rooms for speech such as classrooms and meeting rooms, music studios, small critical listening spaces such as home theatres) and the acoustics of large rooms (larger assembly halls, auditoria, and performance halls).
formation and rhythm. When integrated into an architectural concept, electrical lighting non-intended for poetic composition has the ability to contribute to place, time, and function-telling aspects of places in urban contexts. Urban environments are information wise challenging to pre-historic human...
Leading an architectural project means accompanying the movement which it induces within the teams. Between questioning, uncertainty and fear, the organisational changes inherent to the new facility must be subject to constructive and ongoing exchanges. Ethics, safety and training are revised and the unit projects are sometimes modified.
Drawing on its dynamic strengths, a psychiatric unit develops various projects and care techniques. In this framework, the institute director must make a number of choices with regard to architecture. Why renovate the psychiatry building? What financial investments are required? What criteria should be followed? What if the major argument was based on the respect of the patient's dignity?
Riedijk, M.; Kruijswijk, E.M.; Kri?kovi?, D.; Siebel, J.; Alkan, A.S.; Altürk, E.; De Vylder, J.; Fujimoto, S.; Gantenbein, C.; Geers, K.; Grassi, G.; Linder, M.; Maltzan, M.; Milani, S.; Ockman, J.; Pasquarelli, G.; Riedijk, M.; Ungers, O.M.; Walker, E.
Fifteen essays in 'Architecture as a craft' present a vision of the architectural discipline in which the essence is sought in craft itself. The book is based on the eponymous symposium that the Delft University of Technology held at the Faculty of Architecture from May 13 to June 4, 2009. The texts
Mahdavinejad, M.; Bitaab, N.
Search for high-performance architecture and dreams of future architecture resulted in attempts towards meeting energy efficient architecture and planning in different aspects. Recent trends as a mean to meet future legacy in architecture are based on the idea of innovative technologies for resource efficient buildings, performative design, bio-inspired technologies etc. while there are meaningful differences between architecture of developed and developing countries. Significance of issue might be understood when the emerging cities are found interested in Dubaization and other related booming development doctrines. This paper is to analyze the level of developing countries’ success to achieve smart-eco buildings’ goals and objectives. Emerging cities of West of Asia are selected as case studies of the paper. The results of the paper show that the concept of high-performance architecture and smart-eco buildings are different in developing countries in comparison with developed countries. The paper is to mention five essential issues in order to improve future architecture of developing countries: 1- Integrated Strategies for Energy Efficiency, 2- Contextual Solutions, 3- Embedded and Initial Energy Assessment, 4- Staff and Occupancy Wellbeing, 5- Life-Cycle Monitoring.
Miller, Barbara Stoler, Ed.
This issue of "Mahfil" is devoted to Sanskrit literature and contains a note on Sanskrit pronunciation and selections of Sanskrit literature. It also contains articles analyzing and discussing various aspects of the literature, including "Sanskrit Rhetoric and Poetic,""The Creative Role of the Goddess Vac in the…
The paper explores new phenomena in the contemporary practice of commemoration implemented through architecture. Architectural objects related to memory can be a place where new trends and phenomena appear earlier than in other architectural objects. The text is an attempt to prove that these new spaces of memory are a kind of laboratory where new ideas taking place in architecture and related disciplines are being tested. Research focuses on the bond between the complex and difficult problem of memory and the issue of transdisciplinarity in architecture. Over the last few decades architecture has been - in comparison to other areas - a relatively closed domain of knowledge. Contemporary places of memory - different from the traditional - may be the evidence of changes. On the basis of theoretical approaches, interdisciplinary surveys, in-field analyses and case studies the paper give insight into the relationships between architecture and other areas, emerging in the recently created spaces of memory of different types. The text indicates that today both the study and the design of such places is difficult without going beyond the field of architecture. There is a need for further extensive research, but the paper confirms the potential of this research direction. Spaces of memory offer the opportunity to capture the transformation of the discipline at the moment when the process begins.
Müller, Wilmuth; Kuwertz, Achim; Grönwall, Christina; Petersson, Henrik; Dekker, Rob; Reinert, Frank; Ditzel, Maarten
Experiences from recent conflicts show the strong need for smart sensor suites comprising different multi-spectral imaging sensors as core elements as well as additional non-imaging sensors. Smart sensor suites should be part of a smart sensor network - a network of sensors, databases, evaluation stations and user terminals. Its goal is to optimize the use of various information sources for military operations such as situation assessment, intelligence, surveillance, reconnaissance, target recognition and tracking. Such a smart sensor network will enable commanders to achieve higher levels of situational awareness. Within the study at hand, an open system architecture was developed in order to increase the efficiency of sensor suites. The open system architecture for smart sensor suites, based on a system-of-systems approach, enables combining different sensors in multiple physical configurations, such as distributed sensors, co-located sensors combined in a single package, tower-mounted sensors, sensors integrated in a mobile platform, and trigger sensors. The architecture was derived from a set of system requirements and relevant scenarios. Its mode of operation is adaptable to a series of scenarios with respect to relevant objects of interest, activities to be observed, available transmission bandwidth, etc. The presented open architecture is designed in accordance with the NATO Architecture Framework (NAF). The architecture allows smart sensor suites to be part of a surveillance network, linked e.g. to a sensor planning system and a C4ISR center, and to be used in combination with future RPAS (Remotely Piloted Aircraft Systems) for supporting a more flexible dynamic configuration of RPAS payloads.
Chastek, Gary; Ferguson, Robert
.... Defining these architectural measures is very difficult. The software architecture deeply affects subsequent development and project management decisions, such as the breakdown of the coding tasks and the definition of the development increments...
Dvorak, Robert W.
Discusses the application of the PLATO IV computer-based educational system to a one-semester basic drawing course for freshman architecture, landscape architecture, and interior design students and relates student reactions to the experience. (RAO)
Full Text Available This paper surveys the available system architectures for cyber-physical systems. Several candidate architectures are examined using a series of essential qualities for cyber-physical systems for healthcare. Next, diagrams detailing the expected functionality of infusion pumps in two of the architectures are analyzed. The STRIDE Threat Model is then used to decompose each to determine possible security issues and how they can be addressed. Finally, a comparison of the major security issues in each architecture is presented to help determine which is most adaptable to meet the security needs of cyber-physical systems in healthcare.
Rank, Stephen; O'Coill, Carl; Boldyreff, Cornelia; Doughty, Mark
Much work in software architecture has been inspired by work in physical architecture, in particular Alexander's work on 'design patterns'. By contrast, Alexander's work is little-used in town planning and architecture. In this paper, we examine some of the reasons that this is so, describe some parallels and differences between the fields of physical and software architecture, and identify areas in which future collaboration may be fruitful. The notion of 'participatory design' is important ...
Mistrik, Ivan; Kazman, Rick; Zhang, Yuanyuan
Economics-driven Software Architecture presents a guide for engineers and architects who need to understand the economic impact of architecture design decisions: the long term and strategic viability, cost-effectiveness, and sustainability of applications and systems. Economics-driven software development can increase quality, productivity, and profitability, but comprehensive knowledge is needed to understand the architectural challenges involved in dealing with the development of large, architecturally challenging systems in an economic way. This book covers how to apply economic consider
Full Text Available The purpose of this paper is to describe a practical solution of architecture approach in system development. The software application is the system which optimizes the transport service. The first part of the paper defines the enterprise architecture, its parts and frameworks. Next is explained the NATO Architecture Framework (NAF, a tool for command and control systems development in military environment. The NAF is used for architecture design of the system for optimization of the transport service.
Wijegunaratne, Inji; Evans-Greenwood, Peter
Enterprise Architecture (EA) has evolved to become a prominent presence in today's information systems and technology landscape. The EA discipline is rich in frameworks, methodologies, and the like. However, the question of 'value' for business ;professionals remains largely unanswered - that is, how best can Enterprise Architecture and Enterprise Architects deliver value to the enterprise? Enterprise Architecture for Business Success answers this question. Enterprise Architecture for Business Success is primarily intended for IT professionals working in the area of Enterprise Architectu
In institutions where biological research are made and some technologies make use of radioisotope, the radiation protection is an issue of biosecurity for conceptual reasons. In the process of architectural design of Biomedical Laboratories, engineering and architecture reveal interfaces with other areas of knowledge and specific concepts. Exploring the role of architectural design in favor of personal and environmental protection in biological containment laboratories that handle non-sealed sources in research, the work discusses the triad that compose the principle of containment in health environments: best practices, protective equipment, physical facilities, with greater emphasis on the latter component. The shortcomings of the design process are reflected in construction and in use-operation and maintenance of these buildings, with direct consequences on the occupational health and safety, environmental and credibility of work processes. In this context, the importance of adoption of alternatives to improve the design process is confirmed, taking into account the early consideration of several variables involved and providing subsidies to the related laboratories . The research, conducted at FIOCRUZ - a Brazilian health institution, developed from the analysis of the participants in the architectural project, aiming at the formulation of design guidelines which could contribute to the rationalisation of this kind of building construction
Bokhari, Shahid H.; Mavriplis, Dimitri J.
The Tera Multithreaded Architecture (MTA) is a new parallel supercomputer currently being installed at San Diego Supercomputing Center (SDSC). This machine has an architecture quite different from contemporary parallel machines. The computational processor is a custom design and the machine uses hardware to support very fine grained multithreading. The main memory is shared, hardware randomized and flat. These features make the machine highly suited to the execution of unstructured mesh problems, which are difficult to parallelize on other architectures. We report the results of a study carried out during July-August 1998 to evaluate the execution of EUL3D, a code that solves the Euler equations on an unstructured mesh, on the 2 processor Tera MTA at SDSC. Our investigation shows that parallelization of an unstructured code is extremely easy on the Tera. We were able to get an existing parallel code (designed for a shared memory machine), running on the Tera by changing only the compiler directives. Furthermore, a serial version of this code was compiled to run in parallel on the Tera by judicious use of directives to invoke the "full/empty" tag bits of the machine to obtain synchronization. This version achieves 212 and 406 Mflop/s on one and two processors respectively, and requires no attention to partitioning or placement of data issues that would be of paramount importance in other parallel architectures.
Haber, Eldad; Ruthotto, Lars
Deep neural networks have become invaluable tools for supervised machine learning, e.g. classification of text or images. While often offering superior results over traditional techniques and successfully expressing complicated patterns in data, deep architectures are known to be challenging to design and train such that they generalize well to new data. Critical issues with deep architectures are numerical instabilities in derivative-based learning algorithms commonly called exploding or vanishing gradients. In this paper, we propose new forward propagation techniques inspired by systems of ordinary differential equations (ODE) that overcome this challenge and lead to well-posed learning problems for arbitrarily deep networks. The backbone of our approach is our interpretation of deep learning as a parameter estimation problem of nonlinear dynamical systems. Given this formulation, we analyze stability and well-posedness of deep learning and use this new understanding to develop new network architectures. We relate the exploding and vanishing gradient phenomenon to the stability of the discrete ODE and present several strategies for stabilizing deep learning for very deep networks. While our new architectures restrict the solution space, several numerical experiments show their competitiveness with state-of-the-art networks.
Full Text Available is presented. By virtue of their fully modular nature these machines are able to display a variability of machining functions and cutting degrees of freedom on a single platform. A corresponding modular Open Architecture Control (OAC) system is presented..., Modular Reconfigurable Machines, Open Architecture Control, Modular Machine Control I. INTRODUCTION Reconfigurable Manufacturing Systems (RMS) is a new class of manufacturing systems, having been created to overcome the inadequacies of previous...
Li, Hui-Ya; Hwang, Wen-Jyi; Chang, Chia-Yen
This paper presents a novel VLSI architecture for image segmentation. The architecture is based on the fuzzy c-means algorithm with spatial constraint for reducing the misclassification rate. In the architecture, the usual iterative operations for updating the membership matrix and cluster centroid are merged into one single updating process to evade the large storage requirement. In addition, an efficient pipelined circuit is used for the updating process for accelerating the computational speed. Experimental results show that the the proposed circuit is an effective alternative for real-time image segmentation with low area cost and low misclassification rate.
Holten-Lund, Hans Erik
This thesis describes useful methods and techniques for designing scalable hybrid parallel rendering architectures for 3D computer graphics. Various techniques for utilizing parallelism in a pipelines system are analyzed. During the Ph.D study a prototype 3D graphics architecture named Hybris has...... been developed. Hybris is a prototype rendering architeture which can be tailored to many specific 3D graphics applications and implemented in various ways. Parallel software implementations for both single and multi-processor Windows 2000 system have been demonstrated. Working hardware...... as a case study and an application of the Hybris graphics architecture....
Oliva, J.M.; Serrano-Andres, L.; Klein, D.J.; Schleyer, P.V.R.; Mich, J.
Quantum-mechanical electronic structure computations were employed to explore initial steps towards a comprehensive design of poly carborane architectures through assembly of molecular units. Aspects considered were (i) the striking modification of geometrical parameters through substitution, (ii) endohedral carboranes and proposed ejection mechanisms for energy/ion/atom/energy storage/transport, (iii) the excited state character in single and dimeric molecular units, and (iv) higher architectural constructs. A goal of this work is to find optimal architectures where atom/ion/energy/spin transport within carborane superclusters is feasible in order to modernize and improve future photo energy processes.
The Bachelor's Thesis ,,Organizational architecture of multinational company" sets the target to analyse organizational structures used in multinational companies at present. In the teoretical section is briefly described development of this subject, basic concepts associated with organizational architecture such as globalization, multinational companies and organizational architecture. I also generalized main characteristics of organizational forms and describe their pros and cons. The pract...
This PhD thesis contains the results of various research activities that fall under the topic ‘communication of IT-architecture’. The term IT-architecture defines the various types of architecture that can be found in the domain of Information Technology (software architecture, enterprise
Slot, R.; Dedene, G.; Maes, R.; Proper, E.; Harmsen, F.; Dietz, J.L.G.
The theory and especially the practice of IT architecture have been developed quite vigorously the last years. However, hardly any quantitative data about the value of IT architecture is available. This paper presents the results of a study, which measures the value of IT solution architecture for
Hepburn, Mary Allaire
The extensive social-scientific interest and continuing relevance of environmental study assure its immediate and long-range importance in the social studies. But the crisis atmosphere surrounding this issue threatens a thoughtful, systematic approach to the subject, and poses the danger of a careless rush to activity. As social studies educators,…
Full Text Available Every architectural work is created on the principle that includes the meaning, and then this work is read like an artifact of the particular meaning. Resources by which the meaning is built primarily, susceptible to transformation, as well as routing of understanding (decoding messages carried by a work of architecture, are subject of semiotics and communication theories, which have played significant role for the architecture and the architect. Minimalism in architecture, as a paradigm of the XXI century architecture, means searching for essence located in the irreducible minimum. Inspired use of architectural units (archetypical elements, trough the fatasm of simplicity, assumes the primary responsibility for providing the object identity, because it participates in language formation and therefore in its reading. Volume is form by clean language that builds the expression of the fluid areas liberated of recharge needs. Reduced architectural language is appropriating to the age marked by electronic communications.
Bradford, J.; Wilson, L.; Thon, S.; Millar, N.
This session on transmission issues focused on the role that transmission plays in electricity markets and the importance of getting the market structure right in terms of generation divestiture with buy back contracts, demand side responsive programs, transmission upgrades and long term contracts. The difficulties of distinguishing between market power and scarcity were examined along with some of the complications that ensue if transmission experiences congestion, as exemplified by the August 2003 blackout in eastern North America. The presentations described the best ways to handle transmission issues, and debated whether transmission should be deregulated or follow market forces. Issues of interconnections and reliability of connections were also debated along with the attempt to integrate renewables into the grid. Some presentations identified what new transmission must be built and what must be done to ensure that transmission gets built. The challenges and business opportunities for transmission in Alberta were discussed with reference to plans to invest in new infrastructure, where it is going outside of the province and how it works with other jurisdictions. Manitoba's Conawapa Hydro Project and its 2000 MW tie line to Ontario was also discussed. Some examples of non-optimal use of interconnections in Europe were also discussed in an effort to learn from these mistakes and avoid them in Canada. tabs., figs
The New Brunswick Market Design Committee has examined several issues regarding the restructuring of the province's electricity sector. This report presents issues that require guidance for implementation, with particular focus on options available for their resolutions. The issues include: (1) rate principles for stranded offer service (SOS) supply, (2) the ability of contestable customers to return to SOS after having left it, (3) whether loads embedded in distribution systems are eligible to participate in the bilateral contract market, (4) whether generators or suppliers can offer capacity and energy to SOS suppliers in competition with the SOS supplier, and (5) details for the balancing market, including pricing, bidding protocols, settlements and how intermittent power sources can participate in the market. A section on pricing for SOS explains pricing principles, the use of export profits, pricing for SOS capacity, and time of use pricing. The Committee has made recommendations for the electricity system in the province to have an energy imbalance service that can move towards a market in order to develop an efficient and effective service. This report also explains pricing in the balancing market, penalties, and settlements. 7 refs
Galster, Matthias; Avgeriou, Paris
A reference architecture describes core elements of the software architecture for systems that stem from the same domain. A reference architecture ensures interoperability of systems through standardization. It also facilitates the instantiation of new concrete architectures. However, we currently
Full Text Available The terms architecture, layered architecture and system architecture are often used by researchers, as well as system architects and business process analysts inconsistently. Furthermore, the concept architecture is commonplace in discussions...
Majumder, M.K.; Pandya, N.D.; Kaushik, B.K.; Manhas, S.K.
Carbon nanotube (CN T) can be considered as an emerging interconnect material in current nano scale regime. They are more promising than other interconnect materials such as Al or Cu because of their robustness to electromigration. This research paper aims to address the crosstalk-related issues (signal integrity) in interconnect lines. Different analytical models of single- (SWCNT), double- (DWCNT), and multiwalled CNTs (MWCNT) are studied to analyze the crosstalk delay at global interconnect lengths. A capacitively coupled three-line bus architecture employing CMOS driver is used for accurate estimation of crosstalk delay. Each line in bus architecture is represented with the equivalent RLC models of single and bundled SWCNT, DWCNT, and MWCNT interconnects. Crosstalk delay is observed at middle line (victim) when it switches in opposite direction with respect to the other two lines (aggressors). Using the data predicted by ITRS 2012, a comparative analysis on the basis of crosstalk delay is performed for bundled SWCNT/DWCNT and single MWCNT interconnects. It is observed that the overall crosstalk delay is improved by 40.92% and 21.37% for single MWCNT in comparison to bundled SWCNT and bundled DWCNT interconnects, respectively.
and its content. The urban and spatial question goes far beyond museums and other buildings for art: how in democratic societies should public spaces be supported by art and how can public art support ´cityness´ and meaning versus spaces of consumerism. Famous but egocentric buildings with the main......art and architectural space museums and other exhibition spaces or how artists learn to love architects Over the last two decades, innumerable new museums, art galleries and other exhibition spaces have been built and opened all over the globe. The most extreme growth happened in China, where...... historically considered even the mother of all arts) - but more relevant: what are appropriate architectural spaces for presenting, exhibiting, contemplating, reflecting, meditating, discussing, enjoying, dissenting, debating creations of art. Simplified, this is a question about the relation between package...
Christiansen, Henrik Lehrmann
and it is discussed that it is advantageous to heterogeneous networks and illustrated by a number of examples. Modeling and simulation is a well-known way of doing performance evaluation. An approach to event-driven simulation of communication networks is presented and mixed complexity modeling, which can simplify......Future networks will be heterogeneous! Due to the sheer size of networks (e.g., the Internet) upgrades cannot be instantaneous and thus heterogeneity appears. This means that instead of trying to find the olution, networks hould be designed as being heterogeneous. One of the key equirements here...... is flexibility. This thesis investigates such heterogeneous network architectures and how to make them flexible. A survey of algorithms for network design is presented, and it is described how using heuristics can increase the speed. A hierarchical, MPLS based network architecture is described...
Bellon, Erwin; Feron, Michel; Deprez, Tom; Reynders, Reinoud; Van den Bosch, Bart
Radiological Picture Archiving and Communication Systems (PACS) have only relatively recently become abundant. Many hospitals have made the transition to PACS about a decade ago. During that decade requirements and available technology have changed considerably. In this paper we look at factors that influence the design of tomorrow's systems, especially those in larger multidisciplinary hospitals. We discuss their impact on PACS architecture (a technological perspective) as well as their impact on radiology (a management perspective). We emphasize that many of these influencing factors originate outside radiology and that radiology has little impact on these factors. That makes it the more important for managers in radiology to be aware of architectural aspects and it may change cooperation of radiology with, among others, the hospital's central IT department.
Sze, Raymond W; Hogan, Laurie; Teshima, Satoshi; Davidson, Scott
The rapid pace of technologic advancement and increasing expectations for patient- and family-friendly environments make it common for radiology leaders to be involved in imaging remodel and construction projects. Most radiologists and business directors lack formal training in architectural and construction processes but are expected to play significant and often leading roles in all phases of an imaging construction project. Avoidable mistakes can result in significant increased costs and scheduling delays; knowledgeable participation and communication can result in a final product that enhances staff workflow and morale and improves patient care and experience. This article presents practical guidelines for preparing for and leading a new imaging architectural and construction project. We share principles derived from the radiology and nonradiology literature and our own experience over the past decade completely remodeling a large pediatric radiology department and building a full-service outpatient imaging center. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.
Niepostyn, Stanisław J.
The goal of the MDA is to produce software systems from abstract models in a way where human interaction is restricted to a minimum. These abstract models are based on the UML language. However, the semantics of UML models is defined in a natural language. Subsequently the verification of consistency of these diagrams is needed in order to identify errors in requirements at the early stage of the development process. The verification of consistency is difficult due to a semi-formal nature of UML diagrams. We propose automatic verification of consistency of the series of UML diagrams originating from abstract models implemented with our consistency rules. This Consistent Model Driven Architecture approach enables us to generate automatically complete workflow applications from consistent and complete models developed from abstract models (e.g. Business Context Diagram). Therefore, our method can be used to check practicability (feasibility) of software architecture models.
Architecture has always had to relate to climatic conditions while providing shelter from the sun, the rain, the winds or the cold. This is a main purpose of buildings: To establish an indoor climate different from the outdoor. In the Nordic countries fuels for heating buildings has been a vital...... necessity almost as basic as food and water, and lack of wood has caused illness and migration - scarcity of energy is not a new topic either [Kjærgaard]. The new aspects are that human civilization is in danger of causing severe global climate changes, secondly that we can foresee using up the global non...... cases been to search for traditional and pre-industrialized ways of building and settlement. The idea of this theme number is not to flee from modern life and approaches, but instead to face modern conditions relevant in achieving sustainable urban development and sustainable architecture, the only...
Petersen, Mads Dines
Present research is revolving around the design process and the use of digital applications to support the design process among architects. This work is made in relation to the current discussions about sustainable architecture and the increased focus on energy consumption and the comfort in our...... buildings. However at the bottom of this lies an understanding of how we inhabit the space in our buildings and how we historically have adapted to the changing conditions of the seasons in our buildings. Through an increased understanding of this adaptability of and to our buildings, our work with spaces...... and understanding of spaces in buildings can change significantly and instead of the creation of frozen geometrical spaces, thermal spaces can be created as it is suggested in meteorological architecture where functions are distributed in relation to temperature gradients. This creates an interesting contrast...
Full Text Available The article presents effects of technology, science and capital strategies on changes in traditional forms and definitions of space, architecture and bodies. It confronts us with new processes of thinking and living that are constantly being transformed into new dynamic time and spatial contexts. Space is becoming the information filter, communication network. A cross-section of three landscapes: landscape of megastructures, nomadic landscapes and psychedelic landscapes, theory contributes to understanding of media and space-age technology, information technology and electronical language. It offers designs of various megastructures, media surfaces and envelopes of contemporary information society: the anthropological module, hyper- and infra-bodies, bio-electronical bodies and population genetics bodies. It presents the architecture of communication.
Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID
The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.
Full Text Available Relaying on standpoints of the renowned art critic Herbert Read, according to which realism, idealism and expressionism are not separate art movements, but represent permanent basic factors in all arts, this paper considers the possibility of existence of elementary creative orientation in architecture as well. Starting from basic aspects of perception and representation of the world around us, and through a comparative analysis and examples from other fields, a thesis is presented according to which notions of mimesis (mimicry, associativity and expression in architecture are adequate counterparts to Read's basic factors of art - realism, idealism and expressionism. Depending on sociopolitical, cultural and historical, as well as other circumstances, from time to time some of these factors come to the surface, wrapped up in time, and emerge in some new or old form which we can recognize as an art movement or style.
Rosenberg Bendsen, Jannie
Danish architecture is often portrayed as being in possession of certain special features that render it possible to speak about a Danish architectural tradition, where a humanistic approach to architecture, paired with a strong link to the development of the welfare society, stands in a central...... position. On this way of understanding, Danish architecture historiography has made a momentous impact. In this article, light will be shed on how a Danish architectural historian has played a role in bringing about a sharply delineated self-understanding and a sense of professional cohesion among Danish...
Aghazanian, Hrand; Baumgartner, Eric; Garrett, Michael
Robust Real-Time Reconfigurable Robotics Software Architecture (R4SA) is the name of both a software architecture and software that embodies the architecture. The architecture was conceived in the spirit of current practice in designing modular, hard, realtime aerospace systems. The architecture facilitates the integration of new sensory, motor, and control software modules into the software of a given robotic system. R4SA was developed for initial application aboard exploratory mobile robots on Mars, but is adaptable to terrestrial robotic systems, real-time embedded computing systems in general, and robotic toys.
Elfes, Alberto; Hall, Jeffery L.; Kulczycki, Eric A.; Cameron, Jonathan M.; Morfopoulos, Arin C.; Clouse, Daniel S.; Montgomery, James F.; Ansar, Adnan I.; Machuzak, Richard J.
An architecture for autonomous operation of an aerobot (i.e., a robotic blimp) to be used in scientific exploration of planets and moons in the Solar system with an atmosphere (such as Titan and Venus) is undergoing development. This architecture is also applicable to autonomous airships that could be flown in the terrestrial atmosphere for scientific exploration, military reconnaissance and surveillance, and as radio-communication relay stations in disaster areas. The architecture was conceived to satisfy requirements to perform the following functions: a) Vehicle safing, that is, ensuring the integrity of the aerobot during its entire mission, including during extended communication blackouts. b) Accurate and robust autonomous flight control during operation in diverse modes, including launch, deployment of scientific instruments, long traverses, hovering or station-keeping, and maneuvers for touch-and-go surface sampling. c) Mapping and self-localization in the absence of a global positioning system. d) Advanced recognition of hazards and targets in conjunction with tracking of, and visual servoing toward, targets, all to enable the aerobot to detect and avoid atmospheric and topographic hazards and to identify, home in on, and hover over predefined terrain features or other targets of scientific interest. The architecture is an integrated combination of systems for accurate and robust vehicle and flight trajectory control; estimation of the state of the aerobot; perception-based detection and avoidance of hazards; monitoring of the integrity and functionality ("health") of the aerobot; reflexive safing actions; multi-modal localization and mapping; autonomous planning and execution of scientific observations; and long-range planning and monitoring of the mission of the aerobot. The prototype JPL aerobot (see figure) has been tested extensively in various areas in the California Mojave desert.
Danish artist Asger Jorn (1914-1973) is internationally renowed as a proponent of Nordic art and for his activities as a member of Cobra and the Situationist International. Quite apart from his art, Jorn produced a remarkable quantity of writing on art, architecture and urbanism and engaged...... in discussions and collaborations with architects such as Poul Henningsen and Jørn Utzon. This book reveals for the first time this largely ignored aspect of his work....
Boot, Arnoud W A; Thakor, Anjan
The main purpose of this paper is to take a step towards building a theory of financial system architecture. We begin with basic assumptions about the types of primitive agents and the nature of informational asymmetries in the economy, and then provide a theory that explains which agents coalesce to form banks and which agents trade in the capital market. Our theory incorporates a model of financial market equilibrium with sufficient richness to enable market prices to convey decision-releva...
Walton, Joan; Filman, Robert E.; Korsmeyer, David J.; Lee, Diana D.; Mak, Ron; Patel, Tarang
DARWIN is a NASA developed, Internet-based system for enabling aerospace researchers to securely and remotely access and collaborate on the analysis of aerospace vehicle design data, primarily the results of wind-tunnel testing and numeric (e.g., computational fluid-dynamics) model executions. DARWIN captures, stores and indexes data; manages derived knowledge (such as visualizations across multiple datasets); and provides an environment for designers to collaborate in the analysis of test results. DARWIN is an interesting application because it supports high-volumes of data. integrates multiple modalities of data display (e.g., images and data visualizations), and provides non-trivial access control mechanisms. DARWIN enables collaboration by allowing not only sharing visualizations of data, but also commentary about and views of data. Here we provide an overview of the architecture of D3, the third generation of DARWIN. Earlier versions of DARWIN were characterized by browser-based interfaces and a hodge-podge of server technologies: CGI scripts, applets, PERL, and so forth. But browsers proved difficult to control, and a proliferation of computational mechanisms proved inefficient and difficult to maintain. D3 substitutes a pure-Java approach for that medley: A Java client communicates (though RMI over HTTPS) with a Java-based application server. Code on the server accesses information from JDBC databases, distributed LDAP security services, and a collaborative information system. D3 is a three tier-architecture, but unlike 'E-commerce' applications, the data usage pattern suggests different strategies than traditional Enterprise Java Beans - we need to move volumes of related data together, considerable processing happens on the client, and the 'business logic' on the server-side is primarily data integration and collaboration. With D3, we are extending DARWIN to handle other data domains and to be a distributed system, where a single login allows a user
Full Text Available The World Wide Web is the largest information repository available today. However, this information is very volatile and Web archiving is essential to preserve it for the future. Existing approaches to Web archiving are based on simple definitions of the scope of Web pages to crawl and are limited to basic interactions with Web servers. The aim of the ARCOMEM project is to overcome these limitations and to provide flexible, adaptive and intelligent content acquisition, relying on social media to create topical Web archives. In this article, we focus on ARCOMEM’s crawling architecture. We introduce the overall architecture and we describe its modules, such as the online analysis module, which computes a priority for the Web pages to be crawled, and the Application-Aware Helper which takes into account the type of Web sites and applications to extract structure from crawled content. We also describe a large-scale distributed crawler that has been developed, as well as the modifications we have implemented to adapt Heritrix, an open source crawler, to the needs of the project. Our experimental results from real crawls show that ARCOMEM’s crawling architecture is effective in acquiring focused information about a topic and leveraging the information from social media.
Full Text Available Biology presents many examples of planar distribution and structural networks having dense sets of closed loops. An archetype of this form of network organization is the vasculature of dicotyledonous leaves, which showcases a hierarchically-nested architecture containing closed loops at many different levels. Although a number of approaches have been proposed to measure aspects of the structure of such networks, a robust metric to quantify their hierarchical organization is still lacking. We present an algorithmic framework, the hierarchical loop decomposition, that allows mapping loopy networks to binary trees, preserving in the connectivity of the trees the architecture of the original graph. We apply this framework to investigate computer generated graphs, such as artificial models and optimal distribution networks, as well as natural graphs extracted from digitized images of dicotyledonous leaves and vasculature of rat cerebral neocortex. We calculate various metrics based on the asymmetry, the cumulative size distribution and the Strahler bifurcation ratios of the corresponding trees and discuss the relationship of these quantities to the architectural organization of the original graphs. This algorithmic framework decouples the geometric information (exact location of edges and nodes from the metric topology (connectivity and edge weight and it ultimately allows us to perform a quantitative statistical comparison between predictions of theoretical models and naturally occurring loopy graphs.
Eneida de Almeida
Full Text Available This paper investigates the links between architecture design and restoration, considering the blurry frontier that distinguishes this actions. The study holds in two contemporary architects performance: Lina Bo Bardi (1914-1992 and Aldo Rossi (1931-1997. The analyses of the concrete production, presented here by a work of each architecture – Sesc Pompeia and the Teatro Del Mondo – is based on the ability of reflection on the role of the memory in architecture: not only the memory in the buildings and urban fabrics materiality, but also the memory as an active instrument inside the mental processes adopted by the projects authors. Resorting to architects writings as well as authors who analyses this interventions, they seek to reconstitute the design development path, recognizing the strategy that reinterprets past experiences in order to overcome the traditional contraposition between “old” and “new”, tutorship and innovation.
The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.
Fitzgerald, William A.; Firby, R. James
Complex Event Recognition Architecture (CERA) is the name of a computational architecture, and software that implements the architecture, for recognizing complex event patterns that may be spread across multiple streams of input data. One of the main components of CERA is an intuitive event pattern language that simplifies what would otherwise be the complex, difficult tasks of creating logical descriptions of combinations of temporal events and defining rules for combining information from different sources over time. In this language, recognition patterns are defined in simple, declarative statements that combine point events from given input streams with those from other streams, using conjunction, disjunction, and negation. Patterns can be built on one another recursively to describe very rich, temporally extended combinations of events. Thereafter, a run-time matching algorithm in CERA efficiently matches these patterns against input data and signals when patterns are recognized. CERA can be used to monitor complex systems and to signal operators or initiate corrective actions when anomalous conditions are recognized. CERA can be run as a stand-alone monitoring system, or it can be integrated into a larger system to automatically trigger responses to changing environments or problematic situations.
The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.
Wickens, F J
The Trigger-DAQ community is currently busy preparing material for the DAQ, HLT and DCS TDR. Over the last few weeks a very important step has been a series of meetings to complete agreement on the baseline architecture. An overview of the architecture indicating some of the main parameters is shown in figure 1. As reported at the ATLAS Plenary during the February ATLAS week, the main area where the baseline had not yet been agreed was around the Read-Out System (ROS) and details in the DataFlow. The agreed architecture has: Read-Out Links (ROLs) from the RODs using S-Link; Read-Out Buffers (ROB) sited near the RODs, mounted in a chassis - today assumed to be a PC, using PCI bus at least for configuration, control and monitoring. The baseline assumes data aggregation, in the ROB and/or at the output (which could either be over a bus or in the network). Optimization of the data aggregation will be made in the coming months, but the current model has each ROB card receiving input from 4 ROLs, and 3 such c...
Digital technologies are changing the relationship between design and construction: with computer models, CAD/CAM, and prototyping, designers can gain direct control of building and construction processes. The ability to digitally model designs, and thus to use those models directly in the context of production, creates a synthesis between design and construction in keeping with the tradition of the close relationship between design and craftsmanship, between the quality of the design and the rules of the craft. The evolution of the culture of design and construction is the underlying theme of this book. The aim is to discuss the direction that innovation is now taking, with a particular focus on today’s cutting-edge architectures. The method addresses the ways in which different societies have dealt with the issues of their age regarding design and construction, the different contributions provided by various techniques, and with them the meanings expressed by the architecture. As building design using dig...
Full Text Available Sustainability in architecture should involve environmental and social aspects and also economic aspects. However, in a design process budget issues usually outweigh ecological aspects. How can we then drive clients and builders to put more socially responsible buildings on the market that do not exceed the fixed budget but are environmentally friendly? This paper propose an economic and environmental assessment tool to aid private or public building designers and owners to find the global sustainability value of a green building within a life cycle perspective. Sustainable life cycle tools for buildings design and construction help to achieve successfully integrated architecture. The research here presented proposes a new point of view of the “time-cost-quality triangle” of Project Management, by introducing three further aspects: environment, society and aesthetics.
Capital Architecture is a symbol of a nation's global presence and the cultural and social focal point of its inhabitants. Since the advent of High-Modernism in Western cities, and subsequently decolonised capitals, civic architecture no longer seems to be strictly grounded in the philosophy that national buildings shape the legacy of government and the way a nation is regarded through its built environment. Amidst an exceedingly globalized architectural practice and with the growing concern of key heritage foundations over the shortcomings of international modernism in representing its immediate socio-cultural context, the contextualization of public architecture within its sociological, cultural and economic framework in capital cities became the key denominator of this thesis. Civic architecture in capital cities is essential to confront the challenges of symbolizing a nation and demonstrating the legitimacy of the government'. In today's dominantly secular Western societies, governmental architecture, especially where the seat of political power lies, is the ultimate form of architectural expression in conveying a sense of identity and underlining a nation's status. Departing with these convictions, this thesis investigates the embodied symbolic power, the representative capacity, and the inherent permanence in contemporary architecture, and in its modes of production. Through a vast study on Modern architectural ideals and heritage -- in parallel to methodologies -- the thesis stimulates the future of large scale governmental building practices and aims to identify and index the key constituents that may respond to the lack representation in civic architecture in capital cities.
Ebrahimi, Ali; Mardomi, Karim; Hassanpour Rahimabad, Kasra
Background The physical environment of healthcare buildings has great importance in issues such as patient safety, functional efficiency, user satisfaction, healthcare outcomes, and energy and resources consumption. Objectives The present study assesses physical environments of Iranian healthcare buildings. Materials and Methods This study was performed using a descriptive-analytical method. Data collection was carried out via a written questionnaire. Results Based on the findings of this study, "functional efficiency", "user satisfaction", "environmental issues", "patient safety”, “accountability in incidents and disasters", and "flexibility" are regarded as the most issues in the country's hospitals. Also, none of the parameters is "without any problem" and has a "desirable status". Conclusions According to the responses, all of the healthcare buildings in this research had flaws in their physical environment, which require attention. Thus, it is necessary to review and pay more attention to the architecture of the country's healthcare buildings. PMID:24350145
Abolfazli, Saeid; Sanaei, Zohreh; Gani, Abdullah; Shiraz, Muhammad
The vision of augmenting computing capabilities of mobile devices, especially smartphones with least cost is likely transforming to reality leveraging cloud computing. Cloud exploitation by mobile devices breeds a new research domain called Mobile Cloud Computing (MCC). However, issues like portability and interoperability should be addressed for mobile augmentation which is a non-trivial task using component-based approaches. Service Oriented Architecture (SOA) is a promising design philosop...
Mazzetti, Paolo; Nativi, Stefano
point b) (manipulation of resources through representations), the Geospatial Web poses several issues. In fact, while the Web mainly handles semi-structured information, in the Geospatial Web the information is typically structured with several possible data models (e.g. point series, gridded coverages, trajectories, etc.) and encodings. A possibility would be to simplify the interchange formats, choosing to support a subset of data models and format(s). This is what actually the Web designers did choosing to define a common format for hypermedia (HTML), although the underlying protocol would be generic. Concerning point c), self-descriptive messages, the exchanged messages should describe themselves and their content. This would not be actually a major issue considering the effort put in recent years on geospatial metadata models and specifications. The point d), hypermedia as the engine of application state, is actually where the Geospatial Web would mainly differ from existing geospatial information sharing systems. In fact the existing systems typically adopt a service-oriented architecture, where applications are built as a single service or as a workflow of services. On the other hand, in the Geospatial Web, applications should be built following the path between interconnected resources. The link between resources should be made explicit as hyperlinks. The adoption of Semantic Web solutions would allow to define not only the existence of a link between two resources, but also the nature of the link. The implementation of a Geospatial Web would allow to build an information system with the same characteristics of the Web sharing its points-of-strength and weaknesses. The main advantages would be the following: • The user would interact with the Geospatial Web according to the well-known Web navigation paradigm. This would lower the barrier to the access to geospatial applications for non-specialists (e.g. the success of Google Maps and other Web mapping
Nuclear liability conventions try to provide a set of rules to govern third party liability. Not all States are parties to one of the existing liability conventions. There are a number of reasons why individual States may choose not to join one of the existing conventions. These include limits of compensation, jurisdiction issues, complexity, cost and definition of damage among others. This paper looks at the existing conventions and identifies some of the main issues in the existing conventions which prevent some States from signing them. The paper attempts to tease out some of the perceived gaps in the existing conventions and give a brief description of the reasons why non-Contracting Parties have difficulty with the provisions of the conventions. The paper recognizes that there has been work done in this area previously by the International Expert Group on Nuclear Liability (INLEX) and others to try to develop the existing frameworks to enhance global adherence by nuclear and non-nuclear States to an effective nuclear liability regime. (author)
Full Text Available Many critics consider Richard Serra the leading sculptor of the 20th century. He is famous not only for inventing something new in sculpture (abstract sculpture compositions existed before him, having been opened by constructivist vanguard of the beginning of the 20th century. Material selections by Vladimir Tatlin and sculptures by Osip Tsadkin, as well as compositions by Henry Moor appeared before Serra. Serra is famous for transferring his works' accent from the works as they are, which could be installed in any place, to their environment. That is he saw in the sculpture a key to understanding the urban space. His crude metal sheets and profiles, rectangular and curvilinear, exceeding regular scale of sculpture, come closer to architecture. Richard Serra places them near architectural constructions as checkpoints of intermediate scale category of space located between so-called «street furniture» – lamp posts, stalls, fountains and benches – and buildings, especially huge modern ones.But the matter is not only in the scale. Serra's sculptures are not only abstract compositions that harmoniously add to the space with their spacious scale. They have some mystery, some implicit sense appearing before a pedestrian as an enigma. Their mystique opposes both street furniture and architecture. But first of all it opposes the historical sculpture with its enigma always overshadowed by historical or biographical topic. Krylov's sculpture in the Summer Garden or Minin and Pozharsky's monument on the Red Square do not strike us, because we know that those monuments are erected IN COMMEMORATION of prominent people, as fellow citizens' tribute to their great contribution to the national history. But the crude metal sheets welded at different angles – what are they for? Who needs them?As an art critic, Edward Goldman, said, fame came to Richard Serra in 1989, when the sculpture composition Tilted Arc erected eight years before it was demolished by
Published online: 15 May 2016. ABSTRACT. Sustainable architecture has been shaped with vernacular materials based on the vernacular architecture according to climatic conditions, saving energy and responding to needs and social and cultural conditions. In cold region architecture, the buildings are constructed as ...
Abstract Purpose: To respond to growing calls for a theoretical unpacking of Universal Design (UD), a disparate movement cohering around attempts to design spaces and technologies that seek to allow use by all people (to the fullest extent possible). The on-going embedding of UD into architectural practice and pedagogy represents an opportune juncture at which to draw learning from other distinct-but-related transformatory architectural movements. Methods: Sociological-theoretical commentary. Results: UD has to date, and necessarily, been dominated by the practice contexts from which it emerged. Appealing as a short-hand for description of “designing-for-all”, in most cases UD has come to stand in as a term to signal a general intent in this direction and as an umbrella term for the range of technical design resources that have been developed under these auspices. There remains a fundamental ambivalence vis-à-vis the question of users’ power/capacity to influence decision-making in the design process in UD; technically-oriented typologies of bodies predominate in influential UD architectural accounts. Conclusions: UD represents rich technical and pedagogical resources for those architects committed to transforming the existing built environment so as to be less hostile to a wide range of users. However, within UD, unpacking the social role of the professional architect vis-à-vis a variety of publics is an important, but hitherto underdeveloped, challenge; issues concerning professional-citizen power relations continue to animate parallel architectural politics, and UD can both contribute and draw much from these on-going explorations. Implications for RehabilitationUniversal Design (UD) architecture shares a close affinity with rehabilitation practice, with the creation of built environments that allow use by individuals with a wide range of capacities a priority for both.While an effective communicative “bridge” between professions, UD’s deployment
To respond to growing calls for a theoretical unpacking of Universal Design (UD), a disparate movement cohering around attempts to design spaces and technologies that seek to allow use by all people (to the fullest extent possible). The on-going embedding of UD into architectural practice and pedagogy represents an opportune juncture at which to draw learning from other distinct-but-related transformatory architectural movements. Sociological-theoretical commentary. UD has to date, and necessarily, been dominated by the practice contexts from which it emerged. Appealing as a short-hand for description of "designing-for-all", in most cases UD has come to stand in as a term to signal a general intent in this direction and as an umbrella term for the range of technical design resources that have been developed under these auspices. There remains a fundamental ambivalence vis-à-vis the question of users' power/capacity to influence decision-making in the design process in UD; technically-oriented typologies of bodies predominate in influential UD architectural accounts. UD represents rich technical and pedagogical resources for those architects committed to transforming the existing built environment so as to be less hostile to a wide range of users. However, within UD, unpacking the social role of the professional architect vis-à-vis a variety of publics is an important, but hitherto underdeveloped, challenge; issues concerning professional-citizen power relations continue to animate parallel architectural politics, and UD can both contribute and draw much from these on-going explorations. Implications for Rehabilitation Universal Design (UD) architecture shares a close affinity with rehabilitation practice, with the creation of built environments that allow use by individuals with a wide range of capacities a priority for both. While an effective communicative "bridge" between professions, UD's deployment typically leaves unspoken the capacity of users to
Andri Yatmo Yandi
Full Text Available Architectural education should promote the advancement of knowledge that is necessary as the basis for the development of excellent design practice. Architectural education needs to respond appropriately to the current issues in the society. To find its way into the society in an appropriate way, architecture needs to be liquid. The ability to address the liquidity of architecture requires educational approach that promotes the ability to work with a range of design methods and approaches. There are several principles that become the basis for developing architectural education that could strengthen its position within the society: to promote knowledge-based design practice, to embrace variety of design methods and approaches; to keep a balance between design knowledge and design skills; while at the same time to aim for mastery and excellence in design. These principles should be the basis for defining and developing the curriculum and the process of design learning architectural education. Then the main challenge is on our willingness to be liquid in developing architectural education, which needs continuous renewal and update to respond to the changing context of knowledge, technology and society.
Thuot, M.E.; Dalesio, L.R.
Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature
Thuot, M.E.; Dalesio, L.R.
Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features
Van Steenwinkel, Iris; Dierckx de Casterlé, Bernadette; Heylighen, Ann
Human values and social issues shape visions on dwelling and care for older people, a growing number of whom live in residential care facilities. These facilities' architectural design is considered to play an important role in realizing care visions. This role, however, has received little attention in research. This article presents a case study of a residential care facility for which the architects made considerable effort to match the design with the care vision. The study offers insights into residents' and caregivers' experiences of, respectively, living and working in this facility, and the role of architectural features therein. A single qualitative case study design was used to provide in-depth, contextual insights. The methods include semi-structured interviews with residents and caregivers, and participant observation. Data concerning design intentions, assumptions and strategies were obtained from design documents, through a semi-structured interview with the architects, and observations on site. Our analysis underlines the importance of freedom (and especially freedom of movement), and the balance between experiencing freedom and being bound to a social and physical framework. It shows the architecture features that can have a role therein: small-scaleness in terms of number of residents per dwelling unit, size and compactness; spatial generosity in terms of surface area, room to maneuver and variety of places; and physical accessibility. Our study challenges the idea of family-like group living. Since we found limited sense of group belonging amongst residents, our findings suggest to rethink residential care facilities in terms of private or collective living in order to address residents' social freedom of movement. Caregivers associated 'hominess' with freedom of movement, action and choice, with favorable social dynamics and with the building's residential character. Being perceived as homey, the facility's architectural design matches caregivers
Kuparinen, Anna; Hutchings, Jeffrey A
Life-history traits are generally assumed to be inherited quantitatively. Fishing that targets large, old individuals is expected to decrease age at maturity. In Atlantic salmon (Salmo salar), it has recently been discovered that sea age at maturity is under strong control by a single locus with sexually dimorphic expression of heterozygotes, which makes it less intuitive to predict how life histories respond to selective fishing. We explore evolutionary responses to fishing in Atlantic salmon, using eco-evolutionary simulations with two alternative scenarios for the genetic architecture of age at maturity: (i) control by multiple loci with additive effects and (ii) control by one locus with sexually dimorphic expression. We show that multi-locus control leads to unidirectional evolution towards earlier maturation, whereas single-locus control causes largely divergent and disruptive evolution of age at maturity without a clear phenotypic trend but a wide range of alternative evolutionary trajectories and greater trait variability within trajectories. Our results indicate that the range of evolutionary responses to selective fishing can be wider than previously thought and that a lack of phenotypic trend need not imply that evolution has not occurred. These findings underscore the role of genetic architecture of life-history traits in understanding how human-induced selection can shape target populations.This article is part of the themed issue 'Human influences on evolution, and the ecological and societal consequences'. © 2016 The Author(s).
Nila Inangda Manyam Keumala Daud; Ezrin Arbi; Mohammad Faisal
Malay wood carving has been identified as one of the most important element in Malay Traditional Architecture. The application of this special element has its own philosophy and its purpose was meant to enrich the architecture character values. Issues are currently raised that the application of the Malay wood carving on contemporary architecture in Malaysia has ignored its unique original concept and philosophy. This indicate that the development of Malay Wood Carving requires ...
Full Text Available The art of film, the most popular art of the 20th century, can represent for architecture a means of teaching and promoting its specific values, an inspirational source and a good example of efficient and accessible cultural communication. The architecture presents many resemblances with the world of film regarding the concept and space exploring for communicating some ideas or concepts. Both film and architecture have narrative qualities, work with the world of illusions and representations and compose various elements in order to carry on certain significances. The film makers are making available the suggestive and semantic potential of architecture to render states and attitudes, to outline certain meanings or to emit opinions and comments on political, psychological and social issues.
This volume explores the mathematical character of architectural practice in diverse pre- and early modern contexts. It takes an explicitly interdisciplinary approach, which unites scholarship in early modern architecture with recent work in the history of science, in particular, on the role of practice in the scientific revolution. As a contribution to architectural history, the volume contextualizes design and construction in terms of contemporary mathematical knowledge, attendant forms of mathematical practice, and relevant social distinctions between the mathematical professions. As a contribution to the history of science, the volume presents a series of micro-historical studies that highlight issues of process, materiality, and knowledge production in specific, situated, practical contexts. Our approach sees the designer’s studio, the stone-yard, the drawing floor, and construction site not merely as places where the architectural object takes shape, but where mathematical knowledge itself is depl...
Metallofoldamers are oligomers that fold into three-dimensional structures in a controlled manner upon coordination with metal ions. Molecules in this class have shown an impressive ability to form single-handed helical structures and other three-dimensional architectures. Several metallofoldamers have been applied as sensors due to their selective folding when binding to a specific metal ion, while others show promise for applications as responsive materials on the basis of their ability to fold and unfold upon changes in the oxidation state of the coordinated metal ion, and as novel catalysts. Metallofoldamers: From Helicates to Biomimetic Architectures describes the variety of interactions between oligomers and metal species, with a focus on non-natural synthetic molecules. Topics covered include: the major classes of foldamers and their folding driving force metalloproteins and metalloenzymes helicates: self-assembly, structure and applications abiotic metallo-DNA metallo-PNA and iDNA metallopeptides inte...
Roberts, J.P.; Desell, L.J.; Birch, M.L.; Berkowitz, L.; Bader, J.F.
To provide guidance for the Department of Energy's (DOE) Civilian Radioactive Waste Management Program, the Nuclear Regulatory Commission (NRC) has issued a draft regulatory guide on the Format and Content for the License Application for the High-Level Waste Repository (FCRG). To facilitate the development of the FCRG, NRC suggested that DOE use the draft guide as the basis for preparing an annotated outline for a license application. DOE is doing so using an iterative process called the Annotated Outline Initiative. DOE;s use of the Initiative will assist in achieving the desired incorporation of actual experience in the FCRG, contribute to the development of shared interpretation and understanding of NRC regulations, and provide other important programmatic benefits described in this paper
Jeffery, Keith; Harrison, Matt; Bailo, Daniele
The EPOS-PP Project 2010-2014 proposed an architecture and demonstrated feasibility with a prototype. Requirements based on use cases were collected and an inventory of assets (e.g. datasets, software, users, computing resources, equipment/detectors, laboratory services) (RIDE) was developed. The architecture evolved through three stages of refinement with much consultation both with the EPOS community representing EPOS users and participants in geoscience and with the overall ICT community especially those working on research such as the RDA (Research Data Alliance) community. The architecture consists of a central ICS (Integrated Core Services) consisting of a portal and catalog, the latter providing to end-users a 'map' of all EPOS resources (datasets, software, users, computing, equipment/detectors etc.). ICS is extended to ICS-d (distributed ICS) for certain services (such as visualisation software services or Cloud computing resources) and CES (Computational Earth Science) for specific simulation or analytical processing. ICS also communicates with TCS (Thematic Core Services) which represent European-wide portals to national and local assets, resources and services in the various specific domains (e.g. seismology, volcanology, geodesy) of EPOS. The EPOS-IP project 2015-2019 started October 2015. Two work-packages cover the ICT aspects; WP6 involves interaction with the TCS while WP7 concentrates on ICS including interoperation with ICS-d and CES offerings: in short the ICT architecture. Based on the experience and results of EPOS-PP the ICT team held a pre-meeting in July 2015 and set out a project plan. The first major activity involved requirements (re-)collection with use cases and also updating the inventory of assets held by the various TCS in EPOS. The RIDE database of assets is currently being converted to CERIF (Common European Research Information Format - an EU Recommendation to Member States) to provide the basis for the EPOS-IP ICS Catalog. In